diff options
Diffstat (limited to 'packages')
22 files changed, 2629 insertions, 21 deletions
diff --git a/packages/abiword/abiword_2.6.3.bb b/packages/abiword/abiword_2.6.3.bb new file mode 100644 index 0000000000..e2db4a09cb --- /dev/null +++ b/packages/abiword/abiword_2.6.3.bb @@ -0,0 +1,3 @@ +require abiword-2.5.inc + +RCONFLICTS = "abiword-embedded" diff --git a/packages/curl/curl-sdk_7.18.0.bb b/packages/curl/curl-sdk_7.18.0.bb new file mode 100644 index 0000000000..816fe645bc --- /dev/null +++ b/packages/curl/curl-sdk_7.18.0.bb @@ -0,0 +1,14 @@ +require curl_${PV}.bb +inherit sdk +DEPENDS = "zlib-sdk" + +do_stage () { + install -d ${STAGING_INCDIR}/curl + install -m 0644 ${S}/include/curl/*.h ${STAGING_INCDIR}/curl/ + oe_libinstall -so -a -C lib libcurl ${STAGING_LIBDIR} +} + +do_install() { + : +} + diff --git a/packages/dbus-java/dbus-java_2.4.bb b/packages/dbus-java/dbus-java_2.4.bb new file mode 100644 index 0000000000..461bcb19eb --- /dev/null +++ b/packages/dbus-java/dbus-java_2.4.bb @@ -0,0 +1,87 @@ +DESCRIPTION = "A pure Java D-Bus Implementation" +DESCRIPTION_dbus-java-viewer = "${DESCRIPTION} (DBusViewer Binary)" +DESCRIPTION_dbus-java-bin = "${DESCRIPTION} (Binaries)" +AUTHOR = "Matthew Johnson <dbus@matthew.ath.cx>" +HOMEPAGE = "http://dbus.freedesktop.org/doc/dbus-java" +SECTION = "libs" +LICENSE = "GPLv2 AFL" +DEPENDS = "libmatthew docbook-utils-native docbook-sgml-dtd-4.1-native fastjar-native" +RDEPENDS_dbus-java-viewer = "java2-runtime libmatthew-java ${JPN}" +RDEPENDS_dbus-java-bin = "java2-runtime libmatthew-java ${JPN}" +RSUGGESTS_libdbus-java = "libmatthew-java dbus" +PR = "r0" + +SRC_URI = "http://dbus.freedesktop.org/releases/dbus-java/dbus-java-${PV}.tar.gz" + +S = "${WORKDIR}/dbus-java-${PV}" + +inherit java-library + +do_compile () { + # run target .binclasses first to fix a brokenness in the Makefile + oe_runmake \ + JCFLAGS="-source 1.5" \ + JAVAC="javac" \ + JARPREFIX="${STAGING_DATADIR_JAVA}" \ + JAVAUNIXJARDIR="${STAGING_DATADIR_JAVA}" \ + CLASSPATH="${S}/classes" \ + JAR="fastjar" \ + .binclasses + oe_runmake \ + JCFLAGS="-source 1.5" \ + JAVAC="javac" \ + JARPREFIX="${STAGING_DATADIR_JAVA}" \ + JAVAUNIXJARDIR="${STAGING_DATADIR_JAVA}" \ + CLASSPATH="${S}/classes" \ + JAR="fastjar" \ + all + # Generated shell scripts will have staging paths inside them. + rm bin/* + # Generate them again with target paths. + oe_runmake \ + JAVAC="oefatal \"No Java compilation expected here.\"" \ + JAR="oefatal \"No jar invocation expected here.\"" \ + JARPREFIX=${datadir_java} \ + JAVAUNIXPATH=${datadir_java} \ + all + # Trigger generation of all documentation files to prevent this + # being happen at the target 'install-man' in do_install. + oe_runmake \ + JAVAC="oefatal \"No Java compilation expected here.\"" \ + JAR="oefatal \"No jar invocation expected here.\"" \ + JARPREFIX=${datadir_java} \ + JAVAUNIXPATH=${datadir_java} \ + CreateInterface.1 ListDBus.1 DBusDaemon.1 DBusViewer.1 changelog AUTHORS COPYING README INSTALL DBusCall.1 +} + +do_install () { + oe_jarinstall ${JPN}-${PV}.jar ${JPN}.jar + oe_jarinstall dbus-java-viewer-${PV}.jar dbus-java-viewer.jar + oe_jarinstall dbus-java-bin-${PV}.jar dbus-java-bin.jar + install -d ${D}${bindir} + install bin/DBusViewer ${D}${bindir} + install bin/DBusCall ${D}${bindir} + install bin/CreateInterface ${D}${bindir} + install bin/ListDBus ${D}${bindir} + install bin/DBusDaemon ${D}${bindir} + oe_runmake \ + JAVAC="oefatal \"No Java compilation expected here.\"" \ + JAR="oefatal \"No jar invocation expected here.\"" \ + MANPREFIX=${D}${mandir} \ + DOCPREFIX=${D}${docdir}/${JPN} \ + install-man +} + +do_stage () { + oe_jarinstall -s ${JPN}-${PV}.jar ${JPN}.jar +} + +PACKAGE_ARCH = "all" +# ${JPN} must be last otherwise it would pick up dbus-viewer*.jar +# and dbus-bin*.jar +PACKAGES = "dbus-java-viewer dbus-java-viewer-doc dbus-java-bin dbus-java-bin-doc ${JPN}" + +FILES_dbus-java-viewer = "${datadir}/java/dbus-java-viewer*.jar ${bindir}/DBusViewer" +FILES_dbus-java-viewer-doc = "${mandir}/DBusViewer*" +FILES_dbus-java-bin = "${datadir}/java/dbus-java-bin*.jar ${bindir}" +FILES_dbus-java-bin-doc = "${mandir} ${docdir}/${JPN}" diff --git a/packages/libmatthew/files/.mtn2git_empty b/packages/libmatthew/files/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/libmatthew/files/.mtn2git_empty diff --git a/packages/libmatthew/files/Makefile-0.7.patch b/packages/libmatthew/files/Makefile-0.7.patch new file mode 100644 index 0000000000..4a91cd52cf --- /dev/null +++ b/packages/libmatthew/files/Makefile-0.7.patch @@ -0,0 +1,15 @@ +Index: libmatthew-java-0.7/Makefile +=================================================================== +--- libmatthew-java-0.7.orig/Makefile 2008-05-27 13:17:47.000000000 +0800 ++++ libmatthew-java-0.7/Makefile 2008-05-27 13:18:04.000000000 +0800 +@@ -8,8 +8,8 @@ + PPFLAGS+=-C -P + CFLAGS+=-fpic -Wall -Os -pedantic -std=c99 -Werror + GCJFLAGS+=-fjni +-JCFLAGS+=-source 5.0 +-INCLUDES+=-I$(JAVA_HOME)/include -I$(JAVA_HOME)/include/linux ++#JCFLAGS+=-source 5.0 ++#INCLUDES+=-I$(JAVA_HOME)/include -I$(JAVA_HOME)/include/linux + JAVADOCFLAGS?=-quiet -author -link http://java.sun.com/j2se/1.4.2/docs/api/ + + LDVER?=$(shell ld -v | cut -d' ' -f1) diff --git a/packages/libmatthew/libmatthew_0.7.bb b/packages/libmatthew/libmatthew_0.7.bb new file mode 100644 index 0000000000..68be750f8e --- /dev/null +++ b/packages/libmatthew/libmatthew_0.7.bb @@ -0,0 +1,50 @@ +DESCRIPTION = "Unix socket, debug and hexdump libraries" +AUTHOR = "Matthew Johnson <web@matthew.ath.cx>" +HOMEPAGE = "http://www.matthew.ath.cx/projects/java" +SECTION = "libs" +LICENSE = "LGPL" +DEPENDS = "classpath-native classpath fastjar-native virtual/javac-native" +RDEPENDS_${JPN} = "${PN}-jni" +PR = "r0" + +SRC_URI = "http://www.matthew.ath.cx/projects/java/libmatthew-java-${PV}.tar.gz \ + file://Makefile-0.7.patch;patch=1" + +S = "${WORKDIR}/libmatthew-java-${PV}" + +inherit java-library + +do_compile() { + oe_runmake \ + JCFLAGS="-source 1.5" \ + JAVAC="javac" \ + JAR="fastjar" \ + JAVAH="gjavah" \ + INCLUDES="-I${STAGING_INCDIR}/classpath" \ + LDFLAGS="-fpic -shared -lc ${LDFLAGS}" \ + LD="${CC}" \ + CFLAGS="-fpic -Wall -Os -pedantic -std=c99 -Werror" +} +do_install() { + oe_jarinstall cgi-0.5.jar cgi.jar + oe_jarinstall debug-disable-1.1.jar debug-disable.jar + oe_jarinstall debug-enable-1.1.jar debug-enable.jar + oe_jarinstall hexdump-0.2.jar hexdump.jar + oe_jarinstall io-0.1.jar io.jar + oe_jarinstall unix-0.4.jar unix.jar + oe_libinstall -so libcgi-java ${D}${libdir_jni} + oe_libinstall -so libunix-java ${D}${libdir_jni} +} +do_stage() { + oe_jarinstall -s cgi-0.5.jar cgi.jar + oe_jarinstall -s debug-disable-1.1.jar debug-disable.jar + oe_jarinstall -s debug-enable-1.1.jar debug-enable.jar + oe_jarinstall -s hexdump-0.2.jar hexdump.jar + oe_jarinstall -s io-0.1.jar io.jar + oe_jarinstall -s unix-0.4.jar unix.jar +} + +PACKAGES += "${PN}-jni ${PN}-jni-dbg" + +FILES_${PN}-jni = "${libdir_jni}/lib*.so" +FILES_${PN}-jni-dbg = "${libdir_jni}/.debug/lib*.so" diff --git a/packages/linux/linux-omap1-2.6.25-omap1/.mtn2git_empty b/packages/linux/linux-omap1-2.6.25-omap1/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-omap1-2.6.25-omap1/.mtn2git_empty diff --git a/packages/linux/linux-omap1-2.6.25-omap1/defconfig b/packages/linux/linux-omap1-2.6.25-omap1/defconfig new file mode 100644 index 0000000000..138da037d5 --- /dev/null +++ b/packages/linux/linux-omap1-2.6.25-omap1/defconfig @@ -0,0 +1,1204 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-omap1 +# Thu May 29 14:43:54 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_DEBUG_SRAM_PATCH=y +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +CONFIG_MACH_OMAP_OSK=y +# CONFIG_OMAP_OSK_MISTRAL is not set +# CONFIG_MACH_NOKIA770 is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_OMAP_CF=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_OMAP_STI is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TPS65010=y +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_LP5521 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_OMAP_AIC23 is not set +# CONFIG_SND_OMAP_TSC2101 is not set +# CONFIG_SND_SX1 is not set +# CONFIG_SND_OMAP_TSC2102 is not set +# CONFIG_SND_OMAP24XX_EAC is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set +# CONFIG_OMAP_DSP is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-omap1_2.6.25-omap1.bb b/packages/linux/linux-omap1_2.6.25-omap1.bb new file mode 100644 index 0000000000..1d2d0bedc5 --- /dev/null +++ b/packages/linux/linux-omap1_2.6.25-omap1.bb @@ -0,0 +1,9 @@ +require linux-omap.inc + +COMPATIBLE_MACHINE = "omap5912osk" + +SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.25.tar.bz2 \ + http://www.muru.com/linux/omap/patches/patch-2.6.25-omap1.bz2;patch=1 \ + file://defconfig" + +S = "${WORKDIR}/linux-2.6.25" diff --git a/packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch b/packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch new file mode 100644 index 0000000000..17329be29b --- /dev/null +++ b/packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch @@ -0,0 +1,69 @@ +From 7a444ee080c5f1a62ac5042f1e7926622b3e1ce7 Mon Sep 17 00:00:00 2001 +From: Koen Kooi <koen@openembedded.org> +Date: Fri, 30 May 2008 13:43:36 +0200 +Subject: [PATCH] ARM: OMAP: omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver + +omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver + * on revision A5 and earlier board the two leds can't be controlled seperately, should be fixed in rev. B and C boards. + +Signed-off-by: Koen Kooi <koen@openembedded.org> +--- + arch/arm/mach-omap2/board-omap3beagle.c | 28 ++++++++++++++++++++++++++++ + 1 files changed, 28 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index c992cc7..83891fc 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -19,6 +19,7 @@ + #include <linux/err.h> + #include <linux/clk.h> + #include <linux/io.h> ++#include <linux/leds.h> + + #include <asm/hardware.h> + #include <asm/mach-types.h> +@@ -72,6 +73,32 @@ static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { + .ctrl_name = "internal", + }; + ++struct gpio_led gpio_leds[] = { ++ { ++ .name = "beagleboard::led0", ++ .default_trigger = "none", ++ .gpio = 149, ++ }, ++ { ++ .name = "beagleboard::led1", ++ .default_trigger = "none", ++ .gpio = 150, ++ }, ++}; ++ ++static struct gpio_led_platform_data gpio_led_info = { ++ .leds = gpio_leds, ++ .num_leds = ARRAY_SIZE(gpio_leds), ++}; ++ ++static struct platform_device leds_gpio = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev = { ++ .platform_data = &gpio_led_info, ++ }, ++}; ++ + static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { + { OMAP_TAG_UART, &omap3_beagle_uart_config }, + { OMAP_TAG_MMC, &omap3beagle_mmc_config }, +@@ -83,6 +110,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { + #ifdef CONFIG_RTC_DRV_TWL4030 + &omap3_beagle_twl4030rtc_device, + #endif ++ &leds_gpio, + }; + + static void __init omap3_beagle_init(void) +-- +1.5.4.3 + diff --git a/packages/linux/linux-omap2-git/beagleboard/defconfig b/packages/linux/linux-omap2-git/beagleboard/defconfig index ba27d9de98..0c3a4fc4a7 100644 --- a/packages/linux/linux-omap2-git/beagleboard/defconfig +++ b/packages/linux/linux-omap2-git/beagleboard/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc4-omap1 -# Thu May 29 00:40:28 2008 +# Fri May 30 14:43:52 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -179,9 +179,7 @@ CONFIG_OMAP_BOOT_TAG=y CONFIG_OMAP_BOOT_REASON=y # CONFIG_OMAP_COMPONENT_VERSION is not set # CONFIG_OMAP_GPIO_SWITCH is not set -CONFIG_OMAP_MUX=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_MUX is not set CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MMU_FWK is not set # CONFIG_OMAP_MBOX_FWK is not set @@ -192,7 +190,6 @@ CONFIG_OMAP_DM_TIMER=y # CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set CONFIG_OMAP_LL_DEBUG_UART3=y -CONFIG_OMAP_SERIAL_WAKE=y CONFIG_ARCH_OMAP34XX=y CONFIG_ARCH_OMAP3430=y @@ -273,7 +270,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -# CONFIG_LEDS is not set +CONFIG_LEDS=y CONFIG_ALIGNMENT_TRAP=y # @@ -514,7 +511,7 @@ CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y -CONFIG_FTL=y +# CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set @@ -566,6 +563,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set @@ -1451,7 +1449,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_OMAP_DEBUG is not set # CONFIG_LEDS_OMAP is not set # CONFIG_LEDS_OMAP_PWM is not set -CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO=y # # LED Triggers @@ -1532,7 +1530,7 @@ CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -1586,7 +1584,23 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1828,8 +1842,10 @@ CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/packages/linux/linux-omap2-git/beagleboard/flash.patch b/packages/linux/linux-omap2-git/beagleboard/flash.patch new file mode 100644 index 0000000000..4c76cd97bd --- /dev/null +++ b/packages/linux/linux-omap2-git/beagleboard/flash.patch @@ -0,0 +1,558 @@ +diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile +index 13d0043..d582b8f 100644 +--- a/arch/arm/mach-omap2/Makefile ++++ b/arch/arm/mach-omap2/Makefile +@@ -44,7 +44,8 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ + board-omap3evm-flash.o + obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ + usb-musb.o usb-ehci.o \ +- hsmmc.o ++ hsmmc.o \ ++ board-omap3beagle-flash.o + obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ + hsmmc.o \ + usb-musb.o +diff --git a/arch/arm/mach-omap2/board-omap3beagle-flash.c b/arch/arm/mach-omap2/board-omap3beagle-flash.c +new file mode 100644 +index 0000000..5346df0 +--- /dev/null ++++ b/arch/arm/mach-omap2/board-omap3beagle-flash.c +@@ -0,0 +1,119 @@ ++/* ++ * board-omap3beagle-flash.c ++ * ++ * Copyright (c) 2008 Texas Instruments ++ * ++ * Modified from board-omap3evm-flash.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++#include <linux/mtd/nand.h> ++#include <linux/types.h> ++#include <linux/io.h> ++ ++#include <asm/mach/flash.h> ++#include <asm/arch/board.h> ++#include <asm/arch/gpmc.h> ++#include <asm/arch/nand.h> ++ ++#define GPMC_CS0_BASE 0x60 ++#define GPMC_CS_SIZE 0x30 ++ ++static struct mtd_partition omap3beagle_nand_partitions[] = { ++ /* All the partition sizes are listed in terms of NAND block size */ ++ { ++ .name = "X-Loader", ++ .offset = 0, ++ .size = 4*(64 * 2048), ++ .mask_flags = MTD_WRITEABLE, /* force read-only */ ++ }, ++ { ++ .name = "U-Boot", ++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ ++ .size = 15*(64 * 2048), ++ .mask_flags = MTD_WRITEABLE, /* force read-only */ ++ }, ++ { ++ .name = "U-Boot Env", ++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ ++ .size = 1*(64 * 2048), ++ }, ++ { ++ .name = "Kernel", ++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ ++ .size = 32*(64 * 2048), ++ }, ++ { ++ .name = "File System", ++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct omap_nand_platform_data omap3beagle_nand_data = { ++ .parts = omap3beagle_nand_partitions, ++ .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), ++ .dma_channel = -1, /* disable DMA in OMAP NAND driver */ ++ .nand_setup = NULL, ++ .dev_ready = NULL, ++}; ++ ++static struct resource omap3beagle_nand_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device omap3beagle_nand_device = { ++ .name = "omap2-nand", ++ .id = -1, ++ .dev = { ++ .platform_data = &omap3beagle_nand_data, ++ }, ++ .num_resources = 1, ++ .resource = &omap3beagle_nand_resource, ++}; ++ ++ ++void __init omap3beagle_flash_init(void) ++{ ++ u8 cs = 0; ++ u8 nandcs = GPMC_CS_NUM + 1; ++ ++ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; ++ ++ /* find out the chip-select on which NAND exists */ ++ while (cs < GPMC_CS_NUM) { ++ u32 ret = 0; ++ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); ++ ++ if ((ret & 0xC00) == 0x800) { ++ printk(KERN_INFO "Found NAND on CS%d\n", cs); ++ if (nandcs > GPMC_CS_NUM) ++ nandcs = cs; ++ } ++ cs++; ++ } ++ ++ if (nandcs > GPMC_CS_NUM) { ++ printk(KERN_INFO "NAND: Unable to find configuration " ++ "in GPMC\n "); ++ return; ++ } ++ ++ if (nandcs < GPMC_CS_NUM) { ++ omap3beagle_nand_data.cs = nandcs; ++ omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add + ++ GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); ++ omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); ++ ++ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); ++ if (platform_device_register(&omap3beagle_nand_device) < 0) ++ printk(KERN_ERR "Unable to register NAND device\n"); ++ } ++} +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index c992cc7..99e042e 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -94,6 +94,7 @@ static void __init omap3_beagle_init(void) + hsmmc_init(); + usb_musb_init(); + usb_ehci_init(); ++ omap3beagle_flash_init(); + } + + arch_initcall(omap3_beagle_i2c_init); +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index 3d5e432..02b9ced 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -71,7 +71,7 @@ config MTD_NAND_AMS_DELTA + + config MTD_NAND_OMAP2 + tristate "NAND Flash device on OMAP 2420H4/2430SDP boards" +- depends on (ARM && ARCH_OMAP2 && MTD_NAND) ++ depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3) + help + Support for NAND flash on Texas Instruments 2430SDP/2420H4 platforms. + +diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c +index 3b7307c..3aac1d2 100644 +--- a/drivers/mtd/nand/omap2.c ++++ b/drivers/mtd/nand/omap2.c +@@ -111,15 +111,6 @@ + static const char *part_probes[] = { "cmdlinepart", NULL }; + #endif + +-static int hw_ecc = 1; +- +-/* new oob placement block for use with hardware ecc generation */ +-static struct nand_ecclayout omap_hw_eccoob = { +- .eccbytes = 12, +- .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, +- .oobfree = {{16, 32}, {33, 63} }, +-}; +- + struct omap_nand_info { + struct nand_hw_control controller; + struct omap_nand_platform_data *pdata; +@@ -133,6 +124,13 @@ struct omap_nand_info { + void __iomem *gpmc_cs_baseaddr; + void __iomem *gpmc_baseaddr; + }; ++ ++/* ++ * omap_nand_wp - This function enable or disable the Write Protect feature on ++ * NAND device ++ * @mtd: MTD device structure ++ * @mode: WP ON/OFF ++ */ + static void omap_nand_wp(struct mtd_info *mtd, int mode) + { + struct omap_nand_info *info = container_of(mtd, +@@ -189,11 +187,11 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) + } + + /* +-* omap_read_buf - read data from NAND controller into buffer +-* @mtd: MTD device structure +-* @buf: buffer to store date +-* @len: number of bytes to read +-*/ ++ * omap_read_buf - read data from NAND controller into buffer ++ * @mtd: MTD device structure ++ * @buf: buffer to store date ++ * @len: number of bytes to read ++ */ + static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len) + { + struct omap_nand_info *info = container_of(mtd, +@@ -207,11 +205,11 @@ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len) + } + + /* +-* omap_write_buf - write buffer to NAND controller +-* @mtd: MTD device structure +-* @buf: data buffer +-* @len: number of bytes to write +-*/ ++ * omap_write_buf - write buffer to NAND controller ++ * @mtd: MTD device structure ++ * @buf: data buffer ++ * @len: number of bytes to write ++ */ + static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len) + { + struct omap_nand_info *info = container_of(mtd, +@@ -250,10 +248,16 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len) + return 0; + } + ++#ifdef CONFIG_MTD_NAND_OMAP_HWECC ++/* ++ * omap_hwecc_init-Initialize the Hardware ECC for NAND flash in GPMC controller ++ * @mtd: MTD device structure ++ */ + static void omap_hwecc_init(struct mtd_info *mtd) + { + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); ++ register struct nand_chip *chip = mtd->priv; + unsigned long val = 0x0; + + /* Read from ECC Control Register */ +@@ -264,16 +268,15 @@ static void omap_hwecc_init(struct mtd_info *mtd) + + /* Read from ECC Size Config Register */ + val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG); +- /* ECCSIZE1=512 | ECCSIZE0=8bytes | Select eccResultsize[0123] */ +- val = ((0x000000FF<<22) | (0x00000003<<12) | (0x0000000F)); ++ /* ECCSIZE1=512 | Select eccResultsize[0-3] */ ++ val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F)); + __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG); +- +- + } + + /* +- * This function will generate true ECC value, which can be used ++ * gen_true_ecc - This function will generate true ECC value, which can be used + * when correcting data read from NAND flash memory core ++ * @ecc_buf: buffer to store ecc code + */ + static void gen_true_ecc(u8 *ecc_buf) + { +@@ -289,8 +292,12 @@ static void gen_true_ecc(u8 *ecc_buf) + } + + /* +- * This function compares two ECC's and indicates if there is an error. +- * If the error can be corrected it will be corrected to the buffer ++ * omap_compare_ecc - This function compares two ECC's and indicates if there ++ * is an error. If the error can be corrected it will be corrected to the ++ * buffer ++ * @ecc_data1: ecc code from nand spare area ++ * @ecc_data2: ecc code from hardware register obtained from hardware ecc ++ * @page_data: page data + */ + static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */ + u8 *ecc_data2, /* read from register */ +@@ -409,6 +416,14 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */ + } + } + ++/* ++ * omap_correct_data - Compares the ecc read from nand spare area with ECC ++ * registers values and corrects one bit error if it has occured ++ * @mtd: MTD device structure ++ * @dat: page data ++ * @read_ecc: ecc read from nand flash ++ * @calc_ecc: ecc read from ECC registers ++ */ + static int omap_correct_data(struct mtd_info *mtd, u_char * dat, + u_char * read_ecc, u_char * calc_ecc) + { +@@ -436,65 +451,64 @@ static int omap_correct_data(struct mtd_info *mtd, u_char * dat, + } + + /* +-** Generate non-inverted ECC bytes. +-** +-** Using noninverted ECC can be considered ugly since writing a blank +-** page ie. padding will clear the ECC bytes. This is no problem as long +-** nobody is trying to write data on the seemingly unused page. +-** +-** Reading an erased page will produce an ECC mismatch between +-** generated and read ECC bytes that has to be dealt with separately. +-*/ ++ * omap_calcuate_ecc - Generate non-inverted ECC bytes. ++ * Using noninverted ECC can be considered ugly since writing a blank ++ * page ie. padding will clear the ECC bytes. This is no problem as long ++ * nobody is trying to write data on the seemingly unused page. Reading ++ * an erased page will produce an ECC mismatch between generated and read ++ * ECC bytes that has to be dealt with separately. ++ * @mtd: MTD device structure ++ * @dat: The pointer to data on which ecc is computed ++ * @ecc_code: The ecc_code buffer ++ */ + static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) + { + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + unsigned long val = 0x0; +- unsigned long reg, n; +- +- /* Ex NAND_ECC_HW12_2048 */ +- if ((info->nand.ecc.mode == NAND_ECC_HW) && +- (info->nand.ecc.size == 2048)) +- n = 4; +- else +- n = 1; ++ unsigned long reg; + + /* Start Reading from HW ECC1_Result = 0x200 */ + reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT); +- while (n--) { +- val = __raw_readl(reg); +- *ecc_code++ = val; /* P128e, ..., P1e */ +- *ecc_code++ = val >> 16; /* P128o, ..., P1o */ +- /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ +- *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); +- reg += 4; +- } ++ val = __raw_readl(reg); ++ *ecc_code++ = val; /* P128e, ..., P1e */ ++ *ecc_code++ = val >> 16; /* P128o, ..., P1o */ ++ /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ ++ *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); ++ reg += 4; + + return 0; +-} /* omap_calculate_ecc */ ++} + ++/* ++ * omap_enable_hwecc - This function enables the hardware ecc functionality ++ * @mtd: MTD device structure ++ * @mode: Read/Write mode ++ */ + static void omap_enable_hwecc(struct mtd_info *mtd, int mode) + { + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); ++ register struct nand_chip *chip = mtd->priv; ++ unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; + unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG); + + switch (mode) { + case NAND_ECC_READ : + __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL); +- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ +- val = (1 << 7) | (0x0) | (0x1) ; ++ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ ++ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + case NAND_ECC_READSYN : +- __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL); +- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ +- val = (1 << 7) | (0x0) | (0x1) ; ++ __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL); ++ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ ++ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + case NAND_ECC_WRITE : + __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL); +- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ +- val = (1 << 7) | (0x0) | (0x1) ; ++ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ ++ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + default: + DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n", +@@ -504,7 +518,38 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode) + + __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG); + } ++#endif + ++/* ++ * omap_wait - Wait function is called during Program and erase ++ * operations and the way it is called from MTD layer, we should wait ++ * till the NAND chip is ready after the programming/erase operation ++ * has completed. ++ * @mtd: MTD device structure ++ * @chip: NAND Chip structure ++ */ ++static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) ++{ ++ register struct nand_chip *this = mtd->priv; ++ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, ++ mtd); ++ int status = 0; ++ ++ this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr + ++ GPMC_CS_NAND_COMMAND; ++ this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA; ++ ++ while (!(status & 0x40)) { ++ __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W); ++ status = __raw_readb(this->IO_ADDR_R); ++ } ++ return status; ++} ++ ++/* ++ * omap_dev_ready - calls the platform specific dev_ready function ++ * @mtd: MTD device structure ++ */ + static int omap_dev_ready(struct mtd_info *mtd) + { + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, +@@ -534,7 +579,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) + struct omap_nand_info *info; + struct omap_nand_platform_data *pdata; + int err; +- unsigned long val; ++ unsigned long val; + + + pdata = pdev->dev.platform_data; +@@ -568,15 +613,20 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) + } + + /* Enable RD PIN Monitoring Reg */ +- val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1); +- val |= WR_RD_PIN_MONITORING; +- gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val); ++ if (pdata->dev_ready) { ++ val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1); ++ val |= WR_RD_PIN_MONITORING; ++ gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val); ++ } + + val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7); + val &= ~(0xf << 8); + val |= (0xc & 0xf) << 8; + gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val); + ++ /* NAND write protect off */ ++ omap_nand_wp(&info->mtd, NAND_WP_OFF); ++ + if (!request_mem_region(info->phys_base, NAND_IO_SIZE, + pdev->dev.driver->name)) { + err = -EBUSY; +@@ -597,29 +647,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) + info->nand.write_buf = omap_write_buf; + info->nand.verify_buf = omap_verify_buf; + +- info->nand.dev_ready = omap_dev_ready; +- info->nand.chip_delay = 0; +- +- /* Options */ +- info->nand.options = NAND_BUSWIDTH_16; +- info->nand.options |= NAND_SKIP_BBTSCAN; +- +- if (hw_ecc) { +- /* init HW ECC */ +- omap_hwecc_init(&info->mtd); +- +- info->nand.ecc.calculate = omap_calculate_ecc; +- info->nand.ecc.hwctl = omap_enable_hwecc; +- info->nand.ecc.correct = omap_correct_data; +- info->nand.ecc.mode = NAND_ECC_HW; +- info->nand.ecc.bytes = 12; +- info->nand.ecc.size = 2048; +- info->nand.ecc.layout = &omap_hw_eccoob; +- ++ /* ++ * If RDY/BSY line is connected to OMAP then use the omap ready funcrtion ++ * and the generic nand_wait function which reads the status register ++ * after monitoring the RDY/BSY line.Otherwise use a standard chip delay ++ * which is slightly more than tR (AC Timing) of the NAND device and read ++ * status register until you get a failure or success ++ */ ++ if (pdata->dev_ready) { ++ info->nand.dev_ready = omap_dev_ready; ++ info->nand.chip_delay = 0; + } else { +- info->nand.ecc.mode = NAND_ECC_SOFT; ++ info->nand.waitfunc = omap_wait; ++ info->nand.chip_delay = 50; + } + ++ info->nand.options |= NAND_SKIP_BBTSCAN; ++ if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000) ++ == 0x1000) ++ info->nand.options |= NAND_BUSWIDTH_16; ++ ++#ifdef CONFIG_MTD_NAND_OMAP_HWECC ++ info->nand.ecc.bytes = 3; ++ info->nand.ecc.size = 512; ++ info->nand.ecc.calculate = omap_calculate_ecc; ++ info->nand.ecc.hwctl = omap_enable_hwecc; ++ info->nand.ecc.correct = omap_correct_data; ++ info->nand.ecc.mode = NAND_ECC_HW; ++ ++ /* init HW ECC */ ++ omap_hwecc_init(&info->mtd); ++#else ++ info->nand.ecc.mode = NAND_ECC_SOFT; ++#endif + + /* DIP switches on some boards change between 8 and 16 bit + * bus widths for flash. Try the other width if the first try fails. +@@ -636,14 +696,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) + err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); + if (err > 0) + add_mtd_partitions(&info->mtd, info->parts, err); +- else if (err < 0 && pdata->parts) ++ else if (err <= 0 && pdata->parts) + add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); + else + #endif + add_mtd_device(&info->mtd); + +- omap_nand_wp(&info->mtd, NAND_WP_OFF); +- + platform_set_drvdata(pdev, &info->mtd); + + return 0; +diff --git a/include/asm-arm/arch-omap/board-omap3beagle.h b/include/asm-arm/arch-omap/board-omap3beagle.h +index 46dff31..26ecfb8 100644 +--- a/include/asm-arm/arch-omap/board-omap3beagle.h ++++ b/include/asm-arm/arch-omap/board-omap3beagle.h +@@ -29,5 +29,7 @@ + #ifndef __ASM_ARCH_OMAP3_BEAGLE_H + #define __ASM_ARCH_OMAP3_BEAGLE_H + ++extern void omap3beagle_flash_init(void); ++ + #endif /* __ASM_ARCH_OMAP3_BEAGLE_H */ + diff --git a/packages/linux/linux-omap2_git.bb b/packages/linux/linux-omap2_git.bb index 6c920a2027..0b85223437 100644 --- a/packages/linux/linux-omap2_git.bb +++ b/packages/linux/linux-omap2_git.bb @@ -5,7 +5,7 @@ FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-omap2-git/${MA SRCREV = "6b403428164c53d94bd9377d84e69052563dd57d" PV = "2.6.25+2.6.26-rc4+git${SRCREV}" -PR = "r18" +PR = "r19" SRC_URI = "git://source.mvista.com/git/linux-omap-2.6.git;protocol=git \ @@ -19,6 +19,8 @@ SRC_URI_append_beagleboard = " file://no-harry-potter.diff;patch=1 \ file://0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch;patch=1 \ file://mux.patch;patch=1 \ file://mcbsp-fix-include.patch;patch=1 \ + file://0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch;patch=1 \ + file://flash.patch;patch=1 \ " COMPATIBLE_MACHINE = "omap2430sdp|omap2420h4|beagleboard" diff --git a/packages/pkgconfig/pkgconfig-0.23/.mtn2git_empty b/packages/pkgconfig/pkgconfig-0.23/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/pkgconfig/pkgconfig-0.23/.mtn2git_empty diff --git a/packages/pkgconfig/pkgconfig-0.23/autofoo.patch b/packages/pkgconfig/pkgconfig-0.23/autofoo.patch new file mode 100644 index 0000000000..97895387f5 --- /dev/null +++ b/packages/pkgconfig/pkgconfig-0.23/autofoo.patch @@ -0,0 +1,526 @@ +--- + glib-1.2.10/acglib.m4 | 12 +- + glib-1.2.10/configure.in | 212 ++++++++++++++++++++++++++++++------------------ + 2 files changed, 140 insertions(+), 84 deletions(-) + +Index: pkg-config-0.23/glib-1.2.10/acglib.m4 +=================================================================== +--- pkg-config-0.23.orig/glib-1.2.10/acglib.m4 2008-01-16 22:52:24.000000000 +0000 ++++ pkg-config-0.23/glib-1.2.10/acglib.m4 2008-03-26 20:59:12.000000000 +0000 +@@ -10,7 +10,7 @@ + AC_DIVERT_POP()])])]) + + dnl GLIB_IF_VAR_EQ (ENV_VAR, VALUE [, EQUALS_ACTION] [, ELSE_ACTION]) +-AC_DEFUN(GLIB_IF_VAR_EQ,[ ++AC_DEFUN([GLIB_IF_VAR_EQ],[ + case "$[$1]" in + "[$2]"[)] + [$3] +@@ -21,7 +21,7 @@ + esac + ]) + dnl GLIB_STR_CONTAINS (SRC_STRING, SUB_STRING [, CONTAINS_ACTION] [, ELSE_ACTION]) +-AC_DEFUN(GLIB_STR_CONTAINS,[ ++AC_DEFUN([GLIB_STR_CONTAINS],[ + case "[$1]" in + *"[$2]"*[)] + [$3] +@@ -32,12 +32,12 @@ + esac + ]) + dnl GLIB_ADD_TO_VAR (ENV_VARIABLE, CHECK_STRING, ADD_STRING) +-AC_DEFUN(GLIB_ADD_TO_VAR,[ ++AC_DEFUN([GLIB_ADD_TO_VAR],[ + GLIB_STR_CONTAINS($[$1], [$2], [$1]="$[$1]", [$1]="$[$1] [$3]") + ]) + + dnl GLIB_SIZEOF (INCLUDES, TYPE, ALIAS [, CROSS-SIZE]) +-AC_DEFUN(GLIB_SIZEOF, ++AC_DEFUN([GLIB_SIZEOF], + [changequote(<<, >>)dnl + dnl The name to #define. + define(<<AC_TYPE_NAME>>, translit(glib_sizeof_$3, [a-z *], [A-Z_P]))dnl +@@ -62,7 +62,7 @@ + ]) + + dnl GLIB_BYTE_CONTENTS (INCLUDES, TYPE, ALIAS, N_BYTES, INITIALIZER) +-AC_DEFUN(GLIB_BYTE_CONTENTS, ++AC_DEFUN([GLIB_BYTE_CONTENTS], + [changequote(<<, >>)dnl + dnl The name to #define. + define(<<AC_TYPE_NAME>>, translit(glib_byte_contents_$3, [a-z *], [A-Z_P]))dnl +@@ -92,7 +92,7 @@ + ]) + + dnl GLIB_SYSDEFS (INCLUDES, DEFS_LIST, OFILE [, PREFIX]) +-AC_DEFUN(GLIB_SYSDEFS, ++AC_DEFUN([GLIB_SYSDEFS], + [glib_sysdefso="translit($3, [-_a-zA-Z0-9 *], [-_a-zA-Z0-9])" + glib_sysdef_msg=`echo $2 | sed 's/:[[^ ]]*//g'` + if test "x`(echo '\n') 2>/dev/null`" != 'x\n'; then +Index: pkg-config-0.23/glib-1.2.10/configure.in +=================================================================== +--- pkg-config-0.23.orig/glib-1.2.10/configure.in 2008-01-16 22:52:24.000000000 +0000 ++++ pkg-config-0.23/glib-1.2.10/configure.in 2008-03-26 20:59:12.000000000 +0000 +@@ -1,10 +1,11 @@ + dnl *********************************** + dnl *** include special GLib macros *** + dnl *********************************** +-builtin(include, acglib.m4)dnl ++dnl no need, just use aclocal -I . --CL ++dnl builtin(include, acglib.m4)dnl + + # require autoconf 2.13 +-AC_PREREQ(2.13) ++AC_PREREQ(2.53) + + # init autoconf (and check for presence of glist.c) + AC_INIT(glist.c) +@@ -13,11 +14,48 @@ + cflags_set=${CFLAGS+set} + + # we rewrite this file ++if test "x$cross_compiling" != "xyes"; then + rm -f glibconfig-sysdefs.h ++fi ++ ++# config defines ++ ++AH_TEMPLATE([ENABLE_MEM_CHECK], ++ [Define if enabling memory checking]) ++AH_TEMPLATE([ENABLE_MEM_PROFILE], []) ++AH_TEMPLATE([GLIB_BINARY_AGE], []) ++AH_TEMPLATE([GLIB_BYTE_CONTENTS_GMUTEX], []) ++AH_TEMPLATE([GLIB_INTERFACE_AGE], []) ++AH_TEMPLATE([GLIB_MAJOR_VERSION], []) ++AH_TEMPLATE([GLIB_MINOR_VERSION], []) ++AH_TEMPLATE([GLIB_MICRO_VERSION], []) ++AH_TEMPLATE([GLIB_SIZEOF_GMUTEX], []) ++AH_TEMPLATE([G_COMPILED_WITH_DEBUGGING], []) ++AH_TEMPLATE([G_HAVE_INLINE], []) ++AH_TEMPLATE([G_HAVE___INLINE], []) ++AH_TEMPLATE([G_HAVE___INLINE__], []) ++AH_TEMPLATE([G_THREAD_SOURCE], []) ++AH_TEMPLATE([G_VA_COPY], []) ++AH_TEMPLATE([G_VA_COPY_AS_ARRAY], []) ++AH_TEMPLATE([HAVE_BROKEN_WCTYPE], []) ++AH_TEMPLATE([HAVE_GETPWUID_R], []) ++AH_TEMPLATE([HAVE_GETPWUID_R_POSIX], []) ++AH_TEMPLATE([HAVE_PTHREAD_COND_TIMEDWAIT_POSIX], []) ++AH_TEMPLATE([HAVE_PTHREAD_GETSPECIFIC_POSIX], []) ++AH_TEMPLATE([HAVE_PTHREAD_MUTEX_TRYLOCK_POSIX], []) ++AH_TEMPLATE([HAVE_WCHAR_H], []) ++AH_TEMPLATE([HAVE_WCTYPE_H], []) ++AH_TEMPLATE([NO_FD_SET], []) ++AH_TEMPLATE([NO_SYS_ERRLIST], []) ++AH_TEMPLATE([NO_SYS_SIGLIST], []) ++AH_TEMPLATE([NO_SYS_SIGLIST_DECL], []) ++AH_TEMPLATE([REALLOC_0_WORKS], []) ++ + + dnl we need to AC_DIVERT_PUSH/AC_DIVERT_POP these variable definitions so they + dnl are available for $ac_help expansion (don't we all *love* autoconf?) +-GLIB_AC_DIVERT_BEFORE_HELP([ ++#AC_DIVERT_PUSH(AC_DIVERSION_NOTICE) ++#dnl + # + # The following version number definitions apply to GLib, GModule and GThread + # as a whole, so if changes occoured in any of them, they are all +@@ -38,7 +76,7 @@ + GLIB_BINARY_AGE=10 + GLIB_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION.$GLIB_MICRO_VERSION + dnl +-]) ++#AC_DIVERT_POP()dnl + + AC_SUBST(GLIB_MAJOR_VERSION) + AC_SUBST(GLIB_MINOR_VERSION) +@@ -72,22 +110,20 @@ + AC_DEFINE_UNQUOTED(GLIB_BINARY_AGE, $GLIB_BINARY_AGE) + + dnl Initialize libtool +-AC_PROG_LIBTOOL ++AM_PROG_LIBTOOL + + dnl Initialize maintainer mode + AM_MAINTAINER_MODE + +-AC_CANONICAL_HOST +- + dnl figure debugging default, prior to $ac_help setup + dnl +-GLIB_AC_DIVERT_BEFORE_HELP([ ++#AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl + if test `expr $GLIB_MINOR_VERSION \% 2` = 1 ; then + debug_default=yes + else + debug_default=minimum + fi +-]) dnl ++#AC_DIVERT_POP()dnl + + dnl declare --enable-* args and collect ac_help strings + AC_ARG_ENABLE(debug, [ --enable-debug=[no/minimum/yes] turn on debugging [default=$debug_default]],,enable_debug=$debug_default) +@@ -194,7 +230,9 @@ + CFLAGS=$glib_save_CFLAGS + AC_MSG_WARN( + [No ANSI prototypes found in library. (-std1 didn't work.)]) ++ , AC_MSG_WARN([Skipping test due to crosscompilation]) + ) ++ , AC_MSG_WARN([Skipping test due to crosscompilation]) + ) + LIBS=$glib_save_LIBS + +@@ -336,7 +374,7 @@ + if test $gtk_ok = yes; then + AC_MSG_RESULT([yes, found in sys/types.h]) + else +- AC_HEADER_EGREP(fd_set, sys/select.h, gtk_ok=yes) ++ AC_HEADER_EGREP(fd_mask, sys/select.h, gtk_ok=yes) + if test $gtk_ok = yes; then + AC_DEFINE(HAVE_SYS_SELECT_H) + AC_MSG_RESULT([yes, found in sys/select.h]) +@@ -409,7 +447,7 @@ + glib_cv_sane_realloc=no + ,) + ]) +-if test x$glib_cv_sane_realloc = xyes; then ++if test "x$glib_cv_sane_realloc" = "xyes"; then + AC_DEFINE(REALLOC_0_WORKS) + fi + AC_MSG_RESULT($glib_cv_sane_realloc) +@@ -487,7 +525,8 @@ + ]) + if test "x$glib_cv_va_copy" = "xyes"; then + AC_DEFINE(G_VA_COPY, va_copy) +-else if test "x$glib_cv___va_copy" = "xyes"; then ++else ++if test "x$glib_cv___va_copy" = "xyes"; then + AC_DEFINE(G_VA_COPY, __va_copy) + fi + fi +@@ -496,6 +535,7 @@ + fi + AC_MSG_RESULT($glib_cv_va_val_copy) + ++AC_MSG_WARN([hi mom]) + + dnl *********************** + dnl *** g_module checks *** +@@ -507,23 +547,27 @@ + G_MODULE_BROKEN_RTLD_GLOBAL=0 + G_MODULE_HAVE_DLERROR=0 + dnl *** dlopen() and dlsym() in system libraries ++AC_CHECK_FUNC(dlopen,[ ++ AC_CHECK_FUNC(dlsym,[ ++ G_MODULE_IMPL=G_MODULE_IMPL_DL ++ ], ++ )], ++) + if test -z "$G_MODULE_IMPL"; then +- AC_CHECK_FUNC(dlopen, +- [AC_CHECK_FUNC(dlsym, ++ AC_CHECK_FUNC(dlopen,[ ++ AC_CHECK_FUNC(dlsym,[ + G_MODULE_IMPL=G_MODULE_IMPL_DL +- ,)] +- ,) +- ++ ])], ++ ) + fi +- + dnl *** dlopen() and dlsym() in libdl + if test -z "$G_MODULE_IMPL"; then +- AC_CHECK_LIB(dl, dlopen, +- [AC_CHECK_LIB(dl, dlsym, ++ AC_CHECK_LIB(dl, dlopen,[ ++ AC_CHECK_LIB(dl, dlsym,[ + G_MODULE_LIBS=-ldl + G_MODULE_IMPL=G_MODULE_IMPL_DL +- ,)] +- ,) ++ ])] ++ ) + fi + dnl *** shl_load() in libdld (HP-UX) + if test -z "$G_MODULE_IMPL"; then +@@ -633,6 +677,7 @@ + AC_SUBST(G_MODULE_NEED_USCORE) + AC_SUBST(G_MODULE_BROKEN_RTLD_GLOBAL) + AC_SUBST(GLIB_DEBUG_FLAGS) ++AC_MSG_WARN([hi mom]) + + + dnl *********************** +@@ -869,40 +914,50 @@ + fi + if test x"$have_threads" = xposix; then + LIBS="$LIBS $G_THREAD_LIBS" +- AC_MSG_CHECKING(whether pthread_getspecific is posix like) + # PCThreads has pthread_getspecific(pthread_key_t, void **); +- AC_TRY_COMPILE([#include <pthread.h>], +- [pthread_getspecific(0,NULL);], +- [AC_MSG_RESULT(no)], +- [AC_MSG_RESULT(yes) +- AC_DEFINE(HAVE_PTHREAD_GETSPECIFIC_POSIX)]) +- AC_MSG_CHECKING(whether pthread_mutex_trylock is posix like) ++ AC_CACHE_CHECK([whether pthread_getspecific is posix like], ++ [glib_cv_sys_pthread_getspecific_posix], ++ AC_TRY_COMPILE([#include <pthread.h>], ++ [pthread_getspecific(0,NULL);], ++ [glib_cv_sys_pthread_getspecific_posix=no], ++ [glib_cv_sys_pthread_getspecific_posix=yes]) ++ ) ++ if test x"$glib_cv_sys_pthread_getspecific_posix" = xyes; then ++ AC_DEFINE(HAVE_PTHREAD_GETSPECIFIC_POSIX) ++ fi + # DCE Threads return 1 as success, posix 0. what a mess. +- AC_TRY_RUN([#include <pthread.h> +- pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; +- int main () { +- return !pthread_mutex_trylock (&mutex); }], +- [AC_MSG_RESULT(no)], +- [AC_MSG_RESULT(yes) +- AC_DEFINE(HAVE_PTHREAD_MUTEX_TRYLOCK_POSIX)]) +- AC_MSG_CHECKING(whether pthread_cond_timedwait is posix like) ++ AC_CACHE_CHECK([whether pthread_mutex_trylock is posix like], ++ [glib_cv_sys_pthread_mutex_trylock_posix], ++ AC_TRY_RUN([#include <pthread.h> ++ pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; ++ int main () { ++ return !pthread_mutex_trylock (&mutex); }], ++ [glib_cv_sys_pthread_mutex_trylock_posix=no], ++ [glib_cv_sys_pthread_mutex_trylock_posix=yes]) ++ ) ++ if test x"$glib_cv_sys_pthread_mutex_trylock_posix" = xyes; then ++ AC_DEFINE(HAVE_PTHREAD_MUTEX_TRYLOCK_POSIX) ++ fi + # DCE Threads return -1 as failure, posix ETIMEDOUT. +- AC_TRY_RUN([#include <pthread.h> +- #include <sys/time.h> +- int main () { +- pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; +- pthread_cond_t cond = PTHREAD_COND_INITIALIZER; +- struct timeval tval; +- struct timespec tspec; +- gettimeofday (&tval, NULL); +- tspec.tv_sec = tval.tv_sec; +- tspec.tv_nsec = 0; +- pthread_mutex_lock (&mutex); +- return pthread_cond_timedwait (&cond,&mutex,&tspec) +- != -1;}], +- [AC_MSG_RESULT(no)], +- [AC_MSG_RESULT(yes) +- AC_DEFINE(HAVE_PTHREAD_COND_TIMEDWAIT_POSIX)]) ++ AC_CACHE_CHECK([whether pthread_cond_timedwait is posix like], ++ [glib_cv_sys_pthread_cond_timedwait_posix], ++ AC_TRY_RUN([#include <pthread.h> ++ int main () { ++ pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; ++ pthread_cond_t cond = PTHREAD_COND_INITIALIZER; ++ struct timeval tval; ++ struct timespec tspec; ++ gettimeofday (&tval, NULL); ++ tspec.tv_sec = tval.tv_sec; ++ tspec.tv_nsec = 0; ++ return pthread_cond_timedwait (&cond,&mutex,&tspec) ++ != -1;}], ++ [glib_cv_sys_pthread_cond_timedwait_posix=no], ++ [glib_cv_sys_pthread_cond_timedwait_posix=yes]) ++ ) ++ if test x"$glib_cv_sys_pthread_cond_timedwait_posix" = xyes; then ++ AC_DEFINE(HAVE_PTHREAD_COND_TIMEDWAIT_POSIX) ++ fi + fi + LIBS="$glib_save_LIBS" + CFLAGS="$glib_save_CFLAGS" +@@ -946,13 +1001,14 @@ + dnl **************************************** + dnl *** GLib POLL* compatibility defines *** + dnl **************************************** ++if test x"$cross_compiling" != xyes; then + GLIB_SYSDEFS( + [#include <sys/types.h> + #include <sys/poll.h>], + POLLIN:1 POLLOUT:4 POLLPRI:2 POLLERR:8 POLLHUP:16 POLLNVAL:32, + glibconfig-sysdefs.h, + =) +- ++fi + + dnl ****************************** + dnl *** output the whole stuff *** +@@ -1005,7 +1061,7 @@ + echo '#define GLIB_HAVE_SYS_POLL_H' >> $outfile + fi + +- cat >> $outfile <<_______EOF ++ cat >> $outfile <<EOF + + #ifdef __cplusplus + extern "C" { +@@ -1022,60 +1078,60 @@ + #define G_MINLONG $glib_ml + #define G_MAXLONG $glib_Ml + +-_______EOF ++EOF + + + ### this should always be true in a modern C/C++ compiler +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + typedef signed char gint8; + typedef unsigned char guint8; +-_______EOF ++EOF + + + if test -n "$gint16"; then +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + typedef signed $gint16 gint16; + typedef unsigned $gint16 guint16; +-_______EOF ++EOF + fi + + + if test -n "$gint32"; then +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + typedef signed $gint32 gint32; + typedef unsigned $gint32 guint32; +-_______EOF ++EOF + fi + + + if test -n "$gint64"; then +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + ${glib_warning_guard}#define G_HAVE_GINT64 1 + + ${glib_extension}typedef signed $gint64 gint64; + ${glib_extension}typedef unsigned $gint64 guint64; + + #define G_GINT64_CONSTANT(val) $gint64_constant +-_______EOF ++EOF + fi + + + if test -z "$glib_unknown_void_p"; then +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + + #define GPOINTER_TO_INT(p) ((gint) ${glib_gpi_cast} (p)) + #define GPOINTER_TO_UINT(p) ((guint) ${glib_gpui_cast} (p)) + + #define GINT_TO_POINTER(i) ((gpointer) ${glib_gpi_cast} (i)) + #define GUINT_TO_POINTER(u) ((gpointer) ${glib_gpui_cast} (u)) +-_______EOF ++EOF + else + echo '#error SIZEOF_VOID_P unknown - This should never happen' >>$outfile + fi + + + +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + $glib_atexit + $glib_memmove + $glib_defines +@@ -1087,11 +1143,11 @@ + #else /* !__cplusplus */ + $glib_inline + #endif /* !__cplusplus */ +-_______EOF ++EOF + + echo >>$outfile + if test x$g_mutex_has_default = xyes; then +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + $g_enable_threads_def G_THREADS_ENABLED + #define G_THREADS_IMPL_$g_threads_impl_def + typedef struct _GStaticMutex GStaticMutex; +@@ -1109,15 +1165,15 @@ + #define g_static_mutex_get_mutex(mutex) \ + (g_thread_use_default_impl ? ((GMutex*) &((mutex)->aligned_pad_u)) : \ + g_static_mutex_get_mutex_impl (&((mutex)->runtime_mutex))) +-_______EOF ++EOF + else +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + $g_enable_threads_def G_THREADS_ENABLED + #define G_THREADS_IMPL_$g_threads_impl_def + typedef struct _GMutex* GStaticMutex; + #define G_STATIC_MUTEX_INIT NULL + #define g_static_mutex_get_mutex(mutex) (g_static_mutex_get_mutex_impl (mutex)) +-_______EOF ++EOF + fi + + echo >>$outfile +@@ -1126,15 +1182,15 @@ + g_bit_sizes="$g_bit_sizes 64" + fi + for bits in $g_bit_sizes; do +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + #define GINT${bits}_TO_${g_bs_native}(val) ((gint${bits}) (val)) + #define GUINT${bits}_TO_${g_bs_native}(val) ((guint${bits}) (val)) + #define GINT${bits}_TO_${g_bs_alien}(val) ((gint${bits}) GUINT${bits}_SWAP_LE_BE (val)) + #define GUINT${bits}_TO_${g_bs_alien}(val) (GUINT${bits}_SWAP_LE_BE (val)) +-_______EOF ++EOF + done + +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + #define GLONG_TO_LE(val) ((glong) GINT${glongbits}_TO_LE (val)) + #define GULONG_TO_LE(val) ((gulong) GUINT${glongbits}_TO_LE (val)) + #define GLONG_TO_BE(val) ((glong) GINT${glongbits}_TO_BE (val)) +@@ -1145,14 +1201,14 @@ + #define GUINT_TO_BE(val) ((guint) GUINT${gintbits}_TO_BE (val)) + #define G_BYTE_ORDER $g_byte_order + +-_______EOF ++EOF + + if test -r glibconfig-sysdefs.h; then + cat glibconfig-sysdefs.h >>$outfile + fi + + +- cat >>$outfile <<_______EOF ++ cat >>$outfile <<EOF + + $glib_wc + +@@ -1162,7 +1218,7 @@ + #endif /* __cplusplus */ + + #endif /* GLIBCONFIG_H */ +-_______EOF ++EOF + + + if cmp -s $outfile glibconfig.h; then +Index: pkg-config-0.23/glib-1.2.10/glib.m4 +=================================================================== +--- pkg-config-0.23.orig/glib-1.2.10/glib.m4 2008-04-14 23:34:39.000000000 +0100 ++++ pkg-config-0.23/glib-1.2.10/glib.m4 2008-04-14 09:26:29.000000000 +0100 +@@ -5,7 +5,7 @@ + dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or + dnl gthread is specified in MODULES, pass to glib-config + dnl +-AC_DEFUN(AM_PATH_GLIB, ++AC_DEFUN([AM_PATH_GLIB], + [dnl + dnl Get the cflags and libraries from the glib-config script + dnl diff --git a/packages/pkgconfig/pkgconfig-0.23/glibconfig-sysdefs.h b/packages/pkgconfig/pkgconfig-0.23/glibconfig-sysdefs.h new file mode 100644 index 0000000000..1329e7f21c --- /dev/null +++ b/packages/pkgconfig/pkgconfig-0.23/glibconfig-sysdefs.h @@ -0,0 +1,6 @@ +#define GLIB_SYSDEF_POLLIN =1 +#define GLIB_SYSDEF_POLLOUT =4 +#define GLIB_SYSDEF_POLLPRI =2 +#define GLIB_SYSDEF_POLLERR =8 +#define GLIB_SYSDEF_POLLHUP =16 +#define GLIB_SYSDEF_POLLNVAL =32 diff --git a/packages/pkgconfig/pkgconfig-0.23/sysrootfix.patch b/packages/pkgconfig/pkgconfig-0.23/sysrootfix.patch new file mode 100644 index 0000000000..c5ee82e9aa --- /dev/null +++ b/packages/pkgconfig/pkgconfig-0.23/sysrootfix.patch @@ -0,0 +1,31 @@ +Index: pkg-config-0.23/pkg.c +=================================================================== +--- pkg-config-0.23.orig/pkg.c 2008-03-26 22:18:39.000000000 +0000 ++++ pkg-config-0.23/pkg.c 2008-03-26 22:31:11.000000000 +0000 +@@ -472,19 +472,15 @@ + while (tmp != NULL) + { + char *tmpstr = (char*) tmp->data; +- if (pcsysrootdir != NULL) ++ if (pcsysrootdir != NULL && tmpstr[0] == '-' && ++ (tmpstr[1] == 'I' || tmpstr[1] == 'L')) + { +- if (tmpstr[0] == '-' && +- (tmpstr[1] == 'I' || +- tmpstr[1] == 'L')) +- { +- g_string_append_c (str, '-'); +- g_string_append_c (str, tmpstr[1]); +- g_string_append (str, pcsysrootdir); +- g_string_append (str, tmpstr+2); +- } ++ g_string_append_c (str, '-'); ++ g_string_append_c (str, tmpstr[1]); ++ g_string_append (str, pcsysrootdir); ++ g_string_append (str, tmpstr+2); + } +- else ++ else + { + g_string_append (str, tmpstr); + } diff --git a/packages/pkgconfig/pkgconfig-sdk_0.23.bb b/packages/pkgconfig/pkgconfig-sdk_0.23.bb new file mode 100644 index 0000000000..8c40f04e10 --- /dev/null +++ b/packages/pkgconfig/pkgconfig-sdk_0.23.bb @@ -0,0 +1,11 @@ +require pkgconfig.inc +FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/pkgconfig-${PV}" + +SRC_URI = "http://pkgconfig.freedesktop.org/releases/pkg-config-${PV}.tar.gz \ + file://autofoo.patch;patch=1 \ + file://sysrootfix.patch;patch=1 \ + file://glibconfig-sysdefs.h" + +S = "${WORKDIR}/pkg-config-${PV}/" +inherit sdk +DEPENDS = "" diff --git a/packages/pkgconfig/pkgconfig.inc b/packages/pkgconfig/pkgconfig.inc index a246c8750f..77c9e1c5a5 100644 --- a/packages/pkgconfig/pkgconfig.inc +++ b/packages/pkgconfig/pkgconfig.inc @@ -17,7 +17,7 @@ inherit autotools acpaths = "-I ." do_configure_prepend () { - install -m 0644 ${WORKDIR}/glibconfig-sysdefs.h glib-1.2.8/ + install -m 0644 ${WORKDIR}/glibconfig-sysdefs.h glib-1.2.*/ } do_stage_prepend() { diff --git a/packages/tasks/task-sdk-host.bb b/packages/tasks/task-sdk-host.bb index d238b46144..a8ac3706c4 100644 --- a/packages/tasks/task-sdk-host.bb +++ b/packages/tasks/task-sdk-host.bb @@ -3,7 +3,7 @@ # DESCRIPTION = "Host packages for the standalone SDK or external toolchain" -PR = "r1" +PR = "r2" LICENSE = "MIT" ALLOW_EMPTY = "1" @@ -15,10 +15,6 @@ RDEPENDS_${PN} = "\ binutils-cross-sdk \ gcc-cross-sdk \ gdb-cross-sdk \ - g++ \ - cpp \ - libgcc \ - libgcc-dev \ - libstdc++ \ - libstdc++-dev \ + pkgconfig-sdk \ + opkg-sdk \ " diff --git a/packages/zlib/zlib-sdk.inc b/packages/zlib/zlib-sdk.inc new file mode 100644 index 0000000000..a5901300ee --- /dev/null +++ b/packages/zlib/zlib-sdk.inc @@ -0,0 +1,9 @@ +ZLIB_EXTRA = "" +inherit sdk + +do_stage() { + install -d ${STAGING_INCDIR} + install -m 0644 zlib.h ${STAGING_INCDIR}/zlib.h + install -m 0644 zconf.h ${STAGING_INCDIR}/zconf.h + oe_libinstall -a -so libz ${STAGING_LIBDIR} +} diff --git a/packages/zlib/zlib-sdk_1.2.3.bb b/packages/zlib/zlib-sdk_1.2.3.bb new file mode 100644 index 0000000000..b6e15c3ae2 --- /dev/null +++ b/packages/zlib/zlib-sdk_1.2.3.bb @@ -0,0 +1,2 @@ +require zlib_${PV}.bb +require zlib-sdk.inc |