summaryrefslogtreecommitdiff
path: root/packages
diff options
context:
space:
mode:
Diffstat (limited to 'packages')
-rw-r--r--packages/cron/cron_3.0pl1.bb8
-rw-r--r--packages/cyrus-imapd/cyrus-imapd-2.2.12/install-sh323
-rw-r--r--packages/cyrus-imapd/cyrus-imapd_2.2.12.bb10
-rw-r--r--packages/install/.mtn2git_empty0
-rw-r--r--packages/install/files/.mtn2git_empty0
-rw-r--r--[-rwxr-xr-x]packages/install/files/install-sh (renamed from packages/cron/cron-3.0pl1/install-sh)0
-rw-r--r--packages/install/install-native_0.1.bb25
-rw-r--r--packages/mgetty/mgetty_1.1.30.bb5
8 files changed, 35 insertions, 336 deletions
diff --git a/packages/cron/cron_3.0pl1.bb b/packages/cron/cron_3.0pl1.bb
index 4e13d4c2c1..58a8806271 100644
--- a/packages/cron/cron_3.0pl1.bb
+++ b/packages/cron/cron_3.0pl1.bb
@@ -1,12 +1,12 @@
SECTION = "base"
DESCRIPTION = "Vixie cron."
LICENSE = "cron"
-PR="r3"
+PR="r4"
+DEPENDS += "install-native"
SRC_URI = "http://ibiblio.org/pub/Linux/system/daemons/cron/cron${PV}.tar.gz \
file://nonrootinstall.patch;patch=1 \
file://time.patch;patch=1 \
- file://install-sh \
file://init"
S = "${WORKDIR}/cron${PV}"
@@ -16,8 +16,6 @@ do_install () {
install -d ${D}${sysconfdir}/init.d/
install -d ${D}/var/cron/tabs
install -c -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/cron
- # This will make the -s option work somewhat portably cross
- # platform
- STRIPPROG="$STRIP" oe_runmake 'DESTDIR=${D}' INSTALL="${WORKDIR}/install-sh" install
+ oe_runmake 'DESTDIR=${D}' install
chmod ugo+rx ${D}${sbindir}/* ${D}${bindir}/*
}
diff --git a/packages/cyrus-imapd/cyrus-imapd-2.2.12/install-sh b/packages/cyrus-imapd/cyrus-imapd-2.2.12/install-sh
deleted file mode 100644
index 0b65ee871d..0000000000
--- a/packages/cyrus-imapd/cyrus-imapd-2.2.12/install-sh
+++ /dev/null
@@ -1,323 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2004-10-22.00
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
- case $1 in
- -c) shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- --help) echo "$usage"; exit 0;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
-
- --version) echo "$0 $scriptversion"; exit 0;;
-
- *) # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- test -n "$dir_arg$dstarg" && break
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
- break;;
- esac
-done
-
-if test -z "$1"; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src ;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- src=
-
- if test -d "$dst"; then
- mkdircmd=:
- chmodcmd=
- else
- mkdircmd=$mkdirprog
- fi
- else
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dstarg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dstarg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst ;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
- exit 1
- fi
- dst=$dst/`basename "$src"`
- fi
- fi
-
- # This sed command emulates the dirname command.
- dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-
- # Make sure that the destination directory exists.
-
- # Skip lots of stat calls in the usual case.
- if test ! -d "$dstdir"; then
- defaultIFS='
- '
- IFS="${IFS-$defaultIFS}"
-
- oIFS=$IFS
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
- set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
- shift
- IFS=$oIFS
-
- pathcomp=
-
- while test $# -ne 0 ; do
- pathcomp=$pathcomp$1
- shift
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # mkdir can fail with a `File exist' error in case several
- # install-sh are creating the directory concurrently. This
- # is OK.
- test -d "$pathcomp" || exit
- fi
- pathcomp=$pathcomp/
- done
- fi
-
- if test -n "$dir_arg"; then
- $doit $mkdircmd "$dst" \
- && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
- else
- dstfile=`basename "$dst"`
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
- trap '(exit $?); exit' 1 2 13 15
-
- # Copy the file name to the temp name.
- $doit $cpprog "$src" "$dsttmp" &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dstdir/$dstfile"; then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
- || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
- || {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
- }
- }
- fi || { (exit 1); exit; }
-done
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
- (exit 0); exit
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/packages/cyrus-imapd/cyrus-imapd_2.2.12.bb b/packages/cyrus-imapd/cyrus-imapd_2.2.12.bb
index 468561d40d..09d267a9c8 100644
--- a/packages/cyrus-imapd/cyrus-imapd_2.2.12.bb
+++ b/packages/cyrus-imapd/cyrus-imapd_2.2.12.bb
@@ -1,10 +1,10 @@
SECTION = "console/network"
DEPENDS = "cyrus-sasl db"
LICENSE = "BSD"
-PR = "r1"
+PR = "r2"
+DEPENDS += "install-native"
SRC_URI = "ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/cyrus-imapd-${PV}.tar.gz \
- file://install-sh \
file://autotools.patch;patch=1 \
file://tail.patch;patch=1"
@@ -23,9 +23,3 @@ TARGET_CPPFLAGS =+ "-I${STAGING_DIR}/${TARGET_SYS}/include/db4"
# All, lib/foo.c includes <config.h> from the top level directory and
# is natively compiled
BUILD_CPPFLAGS += " -I${S} -I${S}/et"
-
-do_install () {
- # This will make the -s option work somewhat portably cross
- # platform
- STRIPPROG="$STRIP" oe_runmake 'DESTDIR=${D}' INSTALL='sh ${WORKDIR}/install-sh' install
-}
diff --git a/packages/install/.mtn2git_empty b/packages/install/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/install/.mtn2git_empty
diff --git a/packages/install/files/.mtn2git_empty b/packages/install/files/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/install/files/.mtn2git_empty
diff --git a/packages/cron/cron-3.0pl1/install-sh b/packages/install/files/install-sh
index 0b65ee871d..0b65ee871d 100755..100644
--- a/packages/cron/cron-3.0pl1/install-sh
+++ b/packages/install/files/install-sh
diff --git a/packages/install/install-native_0.1.bb b/packages/install/install-native_0.1.bb
new file mode 100644
index 0000000000..2ae7df615a
--- /dev/null
+++ b/packages/install/install-native_0.1.bb
@@ -0,0 +1,25 @@
+# This package uses the GNU autotools install-sh script to implement
+# a target-capable 'install' command.
+DESCRIPTION = "Target install command"
+MAINTAINER = "John Bowler <jbowler@acm.org>"
+SECTION = "devel"
+PRIORITY = "optional"
+LICENSE = "MIT"
+INHIBIT_DEFAULT_DEPS = "1"
+
+SRC_URI = "file://install-sh"
+
+PACKAGES = ""
+S = "${WORKDIR}"
+
+do_stage() {
+ # When the install command is executed 'STRIP' is defined correctly in
+ # the environment
+ rm -f ${STAGING_BINDIR}/install-sh
+ cp install-sh ${STAGING_BINDIR}/install-sh
+ chmod 755 ${STAGING_BINDIR}/install-sh
+ rm -f ${STAGING_BINDIR}/install
+ echo '#!/bin/sh' >${STAGING_BINDIR}/install
+ echo 'STRIPPROG="$STRIP" exec sh "${STAGING_BINDIR}/install-sh" "$@"' >>${STAGING_BINDIR}/install
+ chmod 755 ${STAGING_BINDIR}/install
+}
diff --git a/packages/mgetty/mgetty_1.1.30.bb b/packages/mgetty/mgetty_1.1.30.bb
index e06249051f..2760b4717e 100644
--- a/packages/mgetty/mgetty_1.1.30.bb
+++ b/packages/mgetty/mgetty_1.1.30.bb
@@ -43,6 +43,11 @@ SRC_URI = "http://nslu.sf.net/downloads/mgetty_1.1.30.orig.tar.gz \
CFLAGS_prepend = "-DAUTO_PPP -DFIDO "
+# This is necessary because of the way the mgetty Makefile works,
+# it effectively recursively makes . - without passing MAKE the -e
+# flag. Oops.
+export MAKE = "make -e"
+
do_compile () {
cp ${WORKDIR}/policy.h ${WORKDIR}/voice-defs.h .
${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS} \
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 08:25:29 +0000