diff options
Diffstat (limited to 'packages')
74 files changed, 264 insertions, 46638 deletions
diff --git a/packages/uboot/files/gta01_nand.h b/packages/uboot/files/gta01_nand.h deleted file mode 100644 index 04cb743158..0000000000 --- a/packages/uboot/files/gta01_nand.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * (C) Copyright 2006 Harald Welte <hwelte@hmw-consulting.de> - * - * Configuation settings for the FIC GTA01 Linux GSM phone - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* we want to start u-boot directly from within NAND flash */ -#define CONFIG_S3C2410_NAND_BOOT 1 - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */ - - -#define USE_920T_MMU 1 -#define CONFIG_USE_IRQ 1 - -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */ -//#define CONFIG_HWFLOW 1 - -/************************************************************ - * RTC - ************************************************************/ -#define CONFIG_RTC_S3C24X0 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS (\ - CFG_CMD_BDI | \ - CFG_CMD_LOADS | \ - CFG_CMD_LAODB | \ - CFG_CMD_IMI | \ - CFG_CMD_CACHE | \ - CFG_CMD_MEMORY | \ - CFG_CMD_ENV | \ - /* CFG_CMD_IRQ | */ \ - CFG_CMD_BOOTD | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_ASKENV | \ - CFG_CMD_RUN | \ - CFG_CMD_ECHO | \ - CFG_CMD_I2C | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_DATE | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - CFG_CMD_MISC | \ - CFG_CMD_USB | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DIAG | \ - /* CFG_CMD_HWFLOW | */ \ - CFG_CMD_SAVES | \ - CFG_CMD_NAND | \ - CFG_CMD_PORTIO | \ - CFG_CMD_MMC | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - 0) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" -/*#define CONFIG_BOOTFILE "elinos-lart" */ -#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000" - -#define CONFIG_DOS_PARTITION 1 - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR 0x33000000 /* default load address */ - -/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -/* it to wrap 100 times (total 1562500) to get 1 sec. */ -#define CFG_HZ 1562500 - -/* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -#define CONFIG_USB_OHCI 1 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#if 1 -#define CFG_NO_FLASH 1 -#else -#define CFG_MAX_FLASH_SECT 1 -#define CFG_MAX_FLASH_BANKS 1 -#endif - -#define CFG_ENV_IS_IN_NAND 1 -#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ - -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE 0x4e000000 -#define CFG_MAX_NAND_DEVICE 1 - -#define CONFIG_MMC 1 -#define CFG_MMC_BASE 0xff000000 - -/* EXT2 driver */ -#define CONFIG_EXT2 1 - -/* FAT driver in u-boot is broken currently */ -#define CONFIG_FAT 1 -#define CONFIG_SUPPORT_VFAT 1 - -/* JFFS2 driver */ -#define CONFIG_JFFS2_NAND 1 -#define CONFIG_JFFS2_NAND_DEV 0 -#define CONFIG_JFFS2_NAND_OFF 0x634000 -#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 - -/* ATAG configuration */ -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 -#if 0 -#define CONFIG_SERIAL_TAG 1 -#define CONFIG_REVISION_TAG 1 -#endif - -#define CONFIG_DRIVER_S3C24X0_I2C 1 -#define CONFIG_HARD_I2C 1 -#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50707 data sheet */ -#define CFG_I2C_SLAVE 0x7f - - -#if 0 -#define CONFIG_VIDEO -#define CONFIG_VIDEO_S3C2410 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE - -#define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc - -#define LCD_VIDEO_ADDR 0x33d00000 -#endif - -#endif /* __CONFIG_H */ diff --git a/packages/uboot/files/qt2410.h b/packages/uboot/files/qt2410.h deleted file mode 100644 index 627f365f86..0000000000 --- a/packages/uboot/files/qt2410.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * Gary Jennejohn <gj@denx.de> - * David Mueller <d.mueller@elsoft.ch> - * - * Configuation settings for the SAMSUNG SMDK2410 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#if 0 -/* If we want to start u-boot from usb bootloader in NOR flash */ -#define CONFIG_SKIP_RELOCATE_UBOOT 1 -#define CONFIG_SKIP_LOWLEVEL_INIT 1 -#else -/* If we want to start u-boot directly from within NAND flash */ -#define CONFIG_S3C2410_NAND_BOOT 1 -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ - - -#define USE_920T_MMU 1 -#define CONFIG_USE_IRQ 1 -//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ -#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -#define CS8900_BASE 0x19000300 -#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ -#define CONFIG_HWFLOW 1 - -/************************************************************ - * RTC - ************************************************************/ -#define CONFIG_RTC_S3C24X0 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_HWFLOW | \ - /* CFG_CMD_IDE | */ \ - /* CFG_CMD_IRQ | */ \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PING | \ - CFG_CMD_PORTIO | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SAVES | \ - CFG_CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttySAC0,115200 loglevel=8 rootdelay=10" -/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 10.0.0.110 -#define CONFIG_SERVERIP 10.0.0.1 -/*#define CONFIG_BOOTFILE "elinos-lart" */ -#define CONFIG_BOOTCOMMAND "mmcinit; ext2load mmc 0 0x32000000 uImage; bootm 0x32000000" - -#define CONFIG_DOS_PARTITION 1 - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR 0x33000000 /* default load address */ - -/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -/* it to wrap 100 times (total 1562500) to get 1 sec. */ -#define CFG_HZ 1562500 - -/* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* IDE/ATA config */ - -#if 0 -#define CFG_IDE_MAXBUS 1 -#define CFG_IDE_MAXDEVICE 2 -#define CFG_IDE_PREINIT 0 - -#define CFG_ATA_BASE_ADDR -#endif - -#define CONFIG_USB_OHCI 1 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CFG_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -#if 0 -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -#endif - -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ - -#define CFG_ENV_IS_IN_NAND 1 -#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ - -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE 0x4e000000 -#define CFG_MAX_NAND_DEVICE 1 - -#define CONFIG_MMC 1 -#define CFG_MMC_BASE 0xff000000 - -#define CONFIG_EXT2 1 - -/* FAT driver in u-boot is broken currently */ -#define CONFIG_FAT 1 -#define CONFIG_SUPPORT_VFAT - -/* ATAG configuration */ -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 -#if 0 -#define CONFIG_SERIAL_TAG 1 -#define CONFIG_REVISION_TAG 1 -#endif - - -#if 0 -#define CONFIG_VIDEO -#define CONFIG_VIDEO_S3C2410 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE - -#define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc - -#define LCD_VIDEO_ADDR 0x33d00000 -#endif - -#endif /* __CONFIG_H */ diff --git a/packages/uboot/files/qt2410_nand.h b/packages/uboot/files/qt2410_nand.h deleted file mode 100644 index 627f365f86..0000000000 --- a/packages/uboot/files/qt2410_nand.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * Gary Jennejohn <gj@denx.de> - * David Mueller <d.mueller@elsoft.ch> - * - * Configuation settings for the SAMSUNG SMDK2410 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#if 0 -/* If we want to start u-boot from usb bootloader in NOR flash */ -#define CONFIG_SKIP_RELOCATE_UBOOT 1 -#define CONFIG_SKIP_LOWLEVEL_INIT 1 -#else -/* If we want to start u-boot directly from within NAND flash */ -#define CONFIG_S3C2410_NAND_BOOT 1 -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ - - -#define USE_920T_MMU 1 -#define CONFIG_USE_IRQ 1 -//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ -#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -#define CS8900_BASE 0x19000300 -#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ -#define CONFIG_HWFLOW 1 - -/************************************************************ - * RTC - ************************************************************/ -#define CONFIG_RTC_S3C24X0 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_HWFLOW | \ - /* CFG_CMD_IDE | */ \ - /* CFG_CMD_IRQ | */ \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PING | \ - CFG_CMD_PORTIO | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SAVES | \ - CFG_CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttySAC0,115200 loglevel=8 rootdelay=10" -/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 10.0.0.110 -#define CONFIG_SERVERIP 10.0.0.1 -/*#define CONFIG_BOOTFILE "elinos-lart" */ -#define CONFIG_BOOTCOMMAND "mmcinit; ext2load mmc 0 0x32000000 uImage; bootm 0x32000000" - -#define CONFIG_DOS_PARTITION 1 - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR 0x33000000 /* default load address */ - -/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -/* it to wrap 100 times (total 1562500) to get 1 sec. */ -#define CFG_HZ 1562500 - -/* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* IDE/ATA config */ - -#if 0 -#define CFG_IDE_MAXBUS 1 -#define CFG_IDE_MAXDEVICE 2 -#define CFG_IDE_PREINIT 0 - -#define CFG_ATA_BASE_ADDR -#endif - -#define CONFIG_USB_OHCI 1 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CFG_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -#if 0 -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -#endif - -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ - -#define CFG_ENV_IS_IN_NAND 1 -#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ - -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE 0x4e000000 -#define CFG_MAX_NAND_DEVICE 1 - -#define CONFIG_MMC 1 -#define CFG_MMC_BASE 0xff000000 - -#define CONFIG_EXT2 1 - -/* FAT driver in u-boot is broken currently */ -#define CONFIG_FAT 1 -#define CONFIG_SUPPORT_VFAT - -/* ATAG configuration */ -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 -#if 0 -#define CONFIG_SERIAL_TAG 1 -#define CONFIG_REVISION_TAG 1 -#endif - - -#if 0 -#define CONFIG_VIDEO -#define CONFIG_VIDEO_S3C2410 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE - -#define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc - -#define LCD_VIDEO_ADDR 0x33d00000 -#endif - -#endif /* __CONFIG_H */ diff --git a/packages/uboot/files/qt2410_ram.h b/packages/uboot/files/qt2410_ram.h deleted file mode 100644 index 62cc88eaf0..0000000000 --- a/packages/uboot/files/qt2410_ram.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * Gary Jennejohn <gj@denx.de> - * David Mueller <d.mueller@elsoft.ch> - * - * Configuation settings for the SAMSUNG SMDK2410 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#if 1 -/* If we want to start u-boot from usb bootloader in NOR flash */ -#define CONFIG_SKIP_RELOCATE_UBOOT 1 -#define CONFIG_SKIP_LOWLEVEL_INIT 1 -#else -/* If we want to start u-boot directly from within NAND flash */ -#define CONFIG_S3C2410_NAND_BOOT 1 -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ - - -#define USE_920T_MMU 1 -#define CONFIG_USE_IRQ 1 -//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ -#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -#define CS8900_BASE 0x19000300 -#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ -#define CONFIG_HWFLOW 1 - -/************************************************************ - * RTC - ************************************************************/ -#define CONFIG_RTC_S3C24X0 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_HWFLOW | \ - /* CFG_CMD_IDE | */ \ - /* CFG_CMD_IRQ | */ \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PING | \ - CFG_CMD_PORTIO | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SAVES | \ - CFG_CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttySAC0,115200 loglevel=8 rootdelay=10" -/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 10.0.0.110 -#define CONFIG_SERVERIP 10.0.0.1 -/*#define CONFIG_BOOTFILE "elinos-lart" */ -#define CONFIG_BOOTCOMMAND "mmcinit; ext2load mmc 0 0x32000000 uImage; bootm 0x32000000" - -#define CONFIG_DOS_PARTITION 1 - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR 0x33000000 /* default load address */ - -/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -/* it to wrap 100 times (total 1562500) to get 1 sec. */ -#define CFG_HZ 1562500 - -/* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* IDE/ATA config */ - -#if 0 -#define CFG_IDE_MAXBUS 1 -#define CFG_IDE_MAXDEVICE 2 -#define CFG_IDE_PREINIT 0 - -#define CFG_ATA_BASE_ADDR -#endif - -#define CONFIG_USB_OHCI 1 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CFG_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -#if 0 -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -#endif - -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ - -#define CFG_ENV_IS_IN_NAND 1 -#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ - -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE 0x4e000000 -#define CFG_MAX_NAND_DEVICE 1 - -#define CONFIG_MMC 1 -#define CFG_MMC_BASE 0xff000000 - -#define CONFIG_EXT2 1 - -/* FAT driver in u-boot is broken currently */ -#define CONFIG_FAT 1 -#define CONFIG_SUPPORT_VFAT - -/* ATAG configuration */ -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 -#if 0 -#define CONFIG_SERIAL_TAG 1 -#define CONFIG_REVISION_TAG 1 -#endif - - -#if 0 -#define CONFIG_VIDEO -#define CONFIG_VIDEO_S3C2410 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE - -#define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc - -#define LCD_VIDEO_ADDR 0x33d00000 -#endif - -#endif /* __CONFIG_H */ diff --git a/packages/uboot/files/u-boot-20060807-qt2410.patch b/packages/uboot/files/u-boot-20060807-qt2410.patch deleted file mode 100644 index ed9f987c81..0000000000 --- a/packages/uboot/files/u-boot-20060807-qt2410.patch +++ /dev/null @@ -1,8435 +0,0 @@ -diff --git a/Makefile b/Makefile -index 128ae59..5d7b5bb 100644 ---- a/Makefile -+++ b/Makefile -@@ -1638,6 +1638,9 @@ omap730p2_cs3boot_config : unconfig - sbc2410x_config: unconfig - @./mkconfig $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 - -+qt2410_config : unconfig -+ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 -+ - scb9328_config : unconfig - @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx - -diff --git a/board/qt2410/Makefile b/board/qt2410/Makefile -new file mode 100644 -index 0000000..407b256 ---- /dev/null -+++ b/board/qt2410/Makefile -@@ -0,0 +1,47 @@ -+# -+# (C) Copyright 2000, 2001, 2002 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = lib$(BOARD).a -+ -+OBJS := qt2410.o flash.o -+SOBJS := lowlevel_init.o -+ -+$(LIB): $(OBJS) $(SOBJS) -+ $(AR) crv $@ $(OBJS) $(SOBJS) -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) -+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -+ -+-include .depend -+ -+######################################################################### -diff --git a/board/qt2410/config.mk b/board/qt2410/config.mk -new file mode 100644 -index 0000000..1af85da ---- /dev/null -+++ b/board/qt2410/config.mk -@@ -0,0 +1,25 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+# -+# SMDK2410 has 1 bank of 64 MB DRAM -+# -+# 3000'0000 to 3400'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# we load ourself to 33F8'0000 -+# -+# download area is 3300'0000 -+# -+ -+ -+TEXT_BASE = 0x33F80000 -diff --git a/board/qt2410/flash.c b/board/qt2410/flash.c -new file mode 100644 -index 0000000..993946b ---- /dev/null -+++ b/board/qt2410/flash.c -@@ -0,0 +1,433 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Alex Zuepke <azu@sysgo.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+ulong myflush (void); -+ -+ -+#define FLASH_BANK_SIZE PHYS_FLASH_SIZE -+#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ -+ -+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -+ -+ -+#define CMD_READ_ARRAY 0x000000F0 -+#define CMD_UNLOCK1 0x000000AA -+#define CMD_UNLOCK2 0x00000055 -+#define CMD_ERASE_SETUP 0x00000080 -+#define CMD_ERASE_CONFIRM 0x00000030 -+#define CMD_PROGRAM 0x000000A0 -+#define CMD_UNLOCK_BYPASS 0x00000020 -+ -+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) -+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) -+ -+#define BIT_ERASE_DONE 0x00000080 -+#define BIT_RDY_MASK 0x00000080 -+#define BIT_PROGRAM_ERROR 0x00000020 -+#define BIT_TIMEOUT 0x80000000 /* our flag */ -+ -+#define READY 1 -+#define ERR 2 -+#define TMO 4 -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+ulong flash_init (void) -+{ -+ int i, j; -+ ulong size = 0; -+ -+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { -+ ulong flashbase = 0; -+ -+ flash_info[i].flash_id = -+#if defined(CONFIG_AMD_LV400) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV400B & FLASH_TYPEMASK); -+#elif defined(CONFIG_AMD_LV800) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV800B & FLASH_TYPEMASK); -+#else -+#error "Unknown flash configured" -+#endif -+ flash_info[i].size = FLASH_BANK_SIZE; -+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; -+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); -+ if (i == 0) -+ flashbase = PHYS_FLASH_1; -+ else -+ panic ("configured too many flash banks!\n"); -+ for (j = 0; j < flash_info[i].sector_count; j++) { -+ if (j <= 3) { -+ /* 1st one is 16 KB */ -+ if (j == 0) { -+ flash_info[i].start[j] = -+ flashbase + 0; -+ } -+ -+ /* 2nd and 3rd are both 8 KB */ -+ if ((j == 1) || (j == 2)) { -+ flash_info[i].start[j] = -+ flashbase + 0x4000 + (j - -+ 1) * -+ 0x2000; -+ } -+ -+ /* 4th 32 KB */ -+ if (j == 3) { -+ flash_info[i].start[j] = -+ flashbase + 0x8000; -+ } -+ } else { -+ flash_info[i].start[j] = -+ flashbase + (j - 3) * MAIN_SECT_SIZE; -+ } -+ } -+ size += flash_info[i].size; -+ } -+ -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_FLASH_BASE, -+ CFG_FLASH_BASE + monitor_flash_len - 1, -+ &flash_info[0]); -+ -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_ENV_ADDR, -+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); -+ -+ return size; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+void flash_print_info (flash_info_t * info) -+{ -+ int i; -+ -+ switch (info->flash_id & FLASH_VENDMASK) { -+ case (AMD_MANUFACT & FLASH_VENDMASK): -+ printf ("AMD: "); -+ break; -+ default: -+ printf ("Unknown Vendor "); -+ break; -+ } -+ -+ switch (info->flash_id & FLASH_TYPEMASK) { -+ case (AMD_ID_LV400B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV400BB (4Mbit)\n"); -+ break; -+ case (AMD_ID_LV800B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV800BB (8Mbit)\n"); -+ break; -+ default: -+ printf ("Unknown Chip Type\n"); -+ goto Done; -+ break; -+ } -+ -+ printf (" Size: %ld MB in %d Sectors\n", -+ info->size >> 20, info->sector_count); -+ -+ printf (" Sector Start Addresses:"); -+ for (i = 0; i < info->sector_count; i++) { -+ if ((i % 5) == 0) { -+ printf ("\n "); -+ } -+ printf (" %08lX%s", info->start[i], -+ info->protect[i] ? " (RO)" : " "); -+ } -+ printf ("\n"); -+ -+ Done:; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+int flash_erase (flash_info_t * info, int s_first, int s_last) -+{ -+ ushort result; -+ int iflag, cflag, prot, sect; -+ int rc = ERR_OK; -+ int chip; -+ -+ /* first look for protection bits */ -+ -+ if (info->flash_id == FLASH_UNKNOWN) -+ return ERR_UNKNOWN_FLASH_TYPE; -+ -+ if ((s_first < 0) || (s_first > s_last)) { -+ return ERR_INVAL; -+ } -+ -+ if ((info->flash_id & FLASH_VENDMASK) != -+ (AMD_MANUFACT & FLASH_VENDMASK)) { -+ return ERR_UNKNOWN_FLASH_VENDOR; -+ } -+ -+ prot = 0; -+ for (sect = s_first; sect <= s_last; ++sect) { -+ if (info->protect[sect]) { -+ prot++; -+ } -+ } -+ if (prot) -+ return ERR_PROTECTED; -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ /* Start erase on unprotected sectors */ -+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { -+ printf ("Erasing sector %2d ... ", sect); -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ if (info->protect[sect] == 0) { /* not protected */ -+ vu_short *addr = (vu_short *) (info->start[sect]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ *addr = CMD_ERASE_CONFIRM; -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > -+ CFG_FLASH_ERASE_TOUT) { -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ chip = TMO; -+ break; -+ } -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_ERASE_DONE) -+ chip = READY; -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) -+ chip = ERR; -+ -+ } while (!chip); -+ -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ -+ if (chip == ERR) { -+ rc = ERR_PROG_ERROR; -+ goto outahere; -+ } -+ if (chip == TMO) { -+ rc = ERR_TIMOUT; -+ goto outahere; -+ } -+ -+ printf ("ok.\n"); -+ } else { /* it was protected */ -+ -+ printf ("protected!\n"); -+ } -+ } -+ -+ if (ctrlc ()) -+ printf ("User Interrupt!\n"); -+ -+ outahere: -+ /* allow flash to settle - wait 10 ms */ -+ udelay_masked (10000); -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash -+ */ -+ -+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) -+{ -+ vu_short *addr = (vu_short *) dest; -+ ushort result; -+ int rc = ERR_OK; -+ int cflag, iflag; -+ int chip; -+ -+ /* -+ * Check if Flash is (sufficiently) erased -+ */ -+ result = *addr; -+ if ((result & data) != data) -+ return ERR_NOT_ERASED; -+ -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; -+ *addr = CMD_PROGRAM; -+ *addr = data; -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { -+ chip = ERR | TMO; -+ break; -+ } -+ if (!chip && ((result & 0x80) == (data & 0x80))) -+ chip = READY; -+ -+ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { -+ result = *addr; -+ -+ if ((result & 0x80) == (data & 0x80)) -+ chip = READY; -+ else -+ chip = ERR; -+ } -+ -+ } while (!chip); -+ -+ *addr = CMD_READ_ARRAY; -+ -+ if (chip == ERR || *addr != data) -+ rc = ERR_PROG_ERROR; -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash. -+ */ -+ -+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -+{ -+ ulong cp, wp; -+ int l; -+ int i, rc; -+ ushort data; -+ -+ wp = (addr & ~1); /* get lower word aligned address */ -+ -+ /* -+ * handle unaligned start bytes -+ */ -+ if ((l = addr - wp) != 0) { -+ data = 0; -+ for (i = 0, cp = wp; i < l; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ for (; i < 2 && cnt > 0; ++i) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ ++cp; -+ } -+ for (; cnt == 0 && i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ wp += 2; -+ } -+ -+ /* -+ * handle word aligned part -+ */ -+ while (cnt >= 2) { -+ data = *((vu_short *) src); -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 2; -+ wp += 2; -+ cnt -= 2; -+ } -+ -+ if (cnt == 0) { -+ return ERR_OK; -+ } -+ -+ /* -+ * handle unaligned tail bytes -+ */ -+ data = 0; -+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ } -+ for (; i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ return write_hword (info, wp, data); -+} -diff --git a/board/qt2410/lowlevel_init.S b/board/qt2410/lowlevel_init.S -new file mode 100644 -index 0000000..310f2a0 ---- /dev/null -+++ b/board/qt2410/lowlevel_init.S -@@ -0,0 +1,167 @@ -+/* -+ * Memory Setup stuff - taken from blob memsetup.S -+ * -+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and -+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) -+ * -+ * Modified for the Samsung SMDK2410 by -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 -+#define B6_SCAN 0x1 /* 9bit */ -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x1 /* 9bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x0 /* 2clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ ldr r0, =SMRDATA -+ ldr r1, _TEXT_BASE -+ sub r0, r0, r1 -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0x32 -+ .word 0x30 -+ .word 0x30 -diff --git a/board/qt2410/qt2410.c b/board/qt2410/qt2410.c -new file mode 100644 -index 0000000..133b748 ---- /dev/null -+++ b/board/qt2410/qt2410.c -@@ -0,0 +1,130 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2410.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#define FCLK_SPEED 1 -+ -+#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ -+#define M_MDIV 0xC3 -+#define M_PDIV 0x4 -+#define M_SDIV 0x1 -+#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ -+#if 0 -+#define M_MDIV 0xA1 -+#define M_PDIV 0x3 -+#define M_SDIV 0x1 -+#else -+#define M_MDIV 0x5c -+#define M_PDIV 0x4 -+#define M_SDIV 0x0 -+#endif -+#endif -+ -+#define USB_CLOCK 1 -+ -+#if USB_CLOCK==0 -+#define U_M_MDIV 0xA1 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x1 -+#elif USB_CLOCK==1 -+#define U_M_MDIV 0x48 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x007FFFFF; -+ gpio->GPBCON = 0x00044555; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPCCON = 0xAAAAAAAA; -+ gpio->GPCUP = 0x0000FFFF; -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ gpio->GPFCON = 0x000055AA; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPGCON = 0xFF95FFBA; -+ //gpio->GPGUP = 0x0000FFFF; -+ gpio->GPGUP = 0x0000AFEF; -+ gpio->GPHCON = 0x0028FAAA; -+ gpio->GPHUP = 0x000007FF; -+ -+ /* arch number of SMDK2410-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_QT2410; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -diff --git a/board/qt2410/u-boot.lds b/board/qt2410/u-boot.lds -new file mode 100644 -index 0000000..f4fbf96 ---- /dev/null -+++ b/board/qt2410/u-boot.lds -@@ -0,0 +1,57 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile -index af9e4ef..10f33f2 100644 ---- a/cpu/arm920t/s3c24x0/Makefile -+++ b/cpu/arm920t/s3c24x0/Makefile -@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk - LIB = lib$(SOC).a - - OBJS = i2c.o interrupts.o serial.o speed.o \ -- usb_ohci.o -+ usb_ohci.o mmc.o nand_read.o nand.o - - all: .depend $(LIB) - -diff --git a/cpu/arm920t/s3c24x0/mmc.c b/cpu/arm920t/s3c24x0/mmc.c -new file mode 100644 -index 0000000..b7057e2 ---- /dev/null -+++ b/cpu/arm920t/s3c24x0/mmc.c -@@ -0,0 +1,568 @@ -+/* -+ * u-boot S3C2410 MMC/SD card driver -+ * (C) Copyright 2006 by Harald Welte <laforge@gnumonks.org> -+ * -+ * based on u-boot pxa MMC driver and linux/drivers/mmc/s3c2410mci.c -+ * (C) 2005-2005 Thomas Kleffel -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <config.h> -+#include <common.h> -+#include <mmc.h> -+#include <asm/errno.h> -+#include <asm/io.h> -+#include <s3c2410.h> -+#include <part.h> -+ -+#ifdef CONFIG_MMC -+ -+#define CONFIG_MMC_WIDE -+ -+//#define MMC_DEBUG -+ -+#ifdef MMC_DEBUG -+#ifdef debug -+#undef debug -+#endif -+#define debug printf -+#endif -+ -+static S3C2410_SDI *sdi; -+ -+extern int -+fat_register_device(block_dev_desc_t *dev_desc, int part_no); -+ -+static block_dev_desc_t mmc_dev; -+ -+block_dev_desc_t * mmc_get_dev(int dev) -+{ -+ return ((block_dev_desc_t *)&mmc_dev); -+} -+ -+/* -+ * FIXME needs to read cid and csd info to determine block size -+ * and other parameters -+ */ -+static uchar mmc_buf[MMC_BLOCK_SIZE]; -+static mmc_csd_t mmc_csd; -+static int mmc_ready = 0; -+static int wide = 0; -+ -+ -+#define CMD_F_RESP 0x01 -+#define CMD_F_RESP_LONG 0x02 -+ -+static u_int32_t * -+/****************************************************/ -+mmc_cmd(ushort cmd, ulong arg, ushort flags) -+/****************************************************/ -+{ -+ static u_int32_t resp[5]; -+ ulong status; -+ int i; -+ -+ u_int32_t ccon, csta; -+ u_int32_t csta_rdy_bit = S3C2410_SDICMDSTAT_CMDSENT; -+ -+ memset(resp, 0, sizeof(resp)); -+ -+ debug("mmc_cmd CMD%d arg=0x%08x flags=%x\n", cmd, arg, flags); -+ -+ sdi->SDICSTA = 0xffffffff; -+ sdi->SDIDSTA = 0xffffffff; -+ sdi->SDIFSTA = 0xffffffff; -+ -+ sdi->SDICARG = arg; -+ -+ ccon = cmd & S3C2410_SDICMDCON_INDEX; -+ ccon |= S3C2410_SDICMDCON_SENDERHOST|S3C2410_SDICMDCON_CMDSTART; -+ -+ if (flags & CMD_F_RESP) { -+ ccon |= S3C2410_SDICMDCON_WAITRSP; -+ csta_rdy_bit = S3C2410_SDICMDSTAT_RSPFIN; /* 1 << 9 */ -+ } -+ -+ if (flags & CMD_F_RESP_LONG) -+ ccon |= S3C2410_SDICMDCON_LONGRSP; -+ -+ sdi->SDICCON = ccon; -+ -+ while (1) { -+ csta = sdi->SDICSTA; -+ if (csta & csta_rdy_bit) -+ break; -+ if (csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { -+ printf("===============> MMC CMD Timeout\n"); -+ sdi->SDICSTA |= S3C2410_SDICMDSTAT_CMDTIMEOUT; -+ break; -+ } -+ } -+ -+ debug("final MMC CMD status 0x%x\n", csta); -+ -+ sdi->SDICSTA |= csta_rdy_bit; -+ -+ if (flags & CMD_F_RESP) { -+ resp[0] = sdi->SDIRSP0; -+ resp[1] = sdi->SDIRSP1; -+ resp[2] = sdi->SDIRSP2; -+ resp[3] = sdi->SDIRSP3; -+ } -+ -+#if 0 -+ for (i=0; i<4; i ++) { -+ debug("MMC resp[%d] = 0x%08x\n", i, resp[i]); -+ } -+#endif -+ -+ return resp; -+} -+ -+#define FIFO_FILL(host) ((host->SDIFSTA & S3C2410_SDIFSTA_COUNTMASK) >> 2) -+ -+static int -+/****************************************************/ -+mmc_block_read(uchar *dst, ulong src, ulong len) -+/****************************************************/ -+{ -+ u_int32_t dcon, fifo; -+ u_int32_t *dst_u32 = (u_int32_t *)dst; -+ u_int32_t *resp; -+ -+ if (len == 0) { -+ return 0; -+ } -+ -+ debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len); -+ -+ /* set block len */ -+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, len, CMD_F_RESP); -+ sdi->SDIBSIZE = len; -+ -+ //sdi->SDIPRE = 0xff; -+ -+ /* setup data */ -+ dcon = (len >> 9) & S3C2410_SDIDCON_BLKNUM_MASK; -+ dcon |= S3C2410_SDIDCON_BLOCKMODE; -+ dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART; -+ if (wide) -+ dcon |= S3C2410_SDIDCON_WIDEBUS; -+ sdi->SDIDCON = dcon; -+ -+ /* send read command */ -+ resp = mmc_cmd(MMC_CMD_READ_BLOCK, src, CMD_F_RESP); -+ -+ while (len > 0) { -+ u_int32_t sdidsta = sdi->SDIDSTA; -+ fifo = FIFO_FILL(sdi); -+ if (sdidsta & (S3C2410_SDIDSTA_FIFOFAIL| -+ S3C2410_SDIDSTA_CRCFAIL| -+ S3C2410_SDIDSTA_RXCRCFAIL| -+ S3C2410_SDIDSTA_DATATIMEOUT)) { -+ printf("mmc_block_read: err SDIDSTA=0x%08x\n", sdidsta); -+ return -EIO; -+ } -+ -+ while (fifo--) { -+ //debug("dst_u32 = 0x%08x\n", dst_u32); -+ *(dst_u32++) = sdi->SDIDAT; -+ if (len >= 4) -+ len -= 4; -+ else { -+ len = 0; -+ break; -+ } -+ } -+ } -+ -+#if 1 -+ debug("waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); -+ while (!(sdi->SDIDSTA & (1 << 4))) {} -+ debug("done waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); -+#endif -+ -+ sdi->SDIDCON = 0; -+ -+#if 0 -+ if (!(sdi->SDIDSTA & S3C2410_SDIDSTA_XFERFINISH)) -+ printf("mmc_block_read; transfer not finished!\n"); -+#endif -+ -+ return 0; -+} -+ -+static int -+/****************************************************/ -+mmc_block_write(ulong dst, uchar *src, int len) -+/****************************************************/ -+{ -+#if 0 -+ uchar *resp; -+ ushort argh, argl; -+ ulong status; -+ -+ if (len == 0) { -+ return 0; -+ } -+ -+ debug("mmc_block_wr dst %lx src %lx len %d\n", dst, (ulong)src, len); -+ -+ argh = len >> 16; -+ argl = len & 0xffff; -+ -+ /* set block len */ -+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, CMD_F_RESP); -+ -+ /* send write command */ -+ argh = dst >> 16; -+ argl = dst & 0xffff; -+ MMC_STRPCL = MMC_STRPCL_STOP_CLK; -+ MMC_NOB = 1; -+ MMC_BLKLEN = len; -+ resp = mmc_cmd(MMC_CMD_WRITE_BLOCK, dst, CMD_F_RESP, -+ MMC_CMDAT_R1|MMC_CMDAT_WRITE|MMC_CMDAT_BLOCK|MMC_CMDAT_DATA_EN); -+ -+ MMC_I_MASK = ~MMC_I_MASK_TXFIFO_WR_REQ; -+ while (len) { -+ if (MMC_I_REG & MMC_I_REG_TXFIFO_WR_REQ) { -+ int i, bytes = min(32,len); -+ -+ for (i=0; i<bytes; i++) { -+ MMC_TXFIFO = *src++; -+ } -+ if (bytes < 32) { -+ MMC_PRTBUF = MMC_PRTBUF_BUF_PART_FULL; -+ } -+ len -= bytes; -+ } -+ status = MMC_STAT; -+ if (status & MMC_STAT_ERRORS) { -+ printf("MMC_STAT error %lx\n", status); -+ return -1; -+ } -+ } -+ MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE; -+ while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)); -+ MMC_I_MASK = ~MMC_I_MASK_PRG_DONE; -+ while (!(MMC_I_REG & MMC_I_REG_PRG_DONE)); -+ status = MMC_STAT; -+ if (status & MMC_STAT_ERRORS) { -+ printf("MMC_STAT error %lx\n", status); -+ return -1; -+ } -+#endif -+ return 0; -+} -+ -+ -+int -+/****************************************************/ -+mmc_read(ulong src, uchar *dst, int size) -+/****************************************************/ -+{ -+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end; -+ ulong mmc_block_size, mmc_block_address; -+ -+ if (size == 0) { -+ return 0; -+ } -+ -+ if (!mmc_ready) { -+ printf("Please initialize the MMC first\n"); -+ return -1; -+ } -+ -+ mmc_block_size = MMC_BLOCK_SIZE; -+ mmc_block_address = ~(mmc_block_size - 1); -+ -+ src -= CFG_MMC_BASE; -+ end = src + size; -+ part_start = ~mmc_block_address & src; -+ part_end = ~mmc_block_address & end; -+ aligned_start = mmc_block_address & src; -+ aligned_end = mmc_block_address & end; -+ -+ /* all block aligned accesses */ -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_start) { -+ part_len = mmc_block_size - part_start; -+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) { -+ return -1; -+ } -+ memcpy(dst, mmc_buf+part_start, part_len); -+ dst += part_len; -+ src += part_len; -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) { -+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) { -+ return -1; -+ } -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_end && src < end) { -+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) { -+ return -1; -+ } -+ memcpy(dst, mmc_buf, part_end); -+ } -+ return 0; -+} -+ -+int -+/****************************************************/ -+mmc_write(uchar *src, ulong dst, int size) -+/****************************************************/ -+{ -+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end; -+ ulong mmc_block_size, mmc_block_address; -+ -+ if (size == 0) { -+ return 0; -+ } -+ -+ if (!mmc_ready) { -+ printf("Please initialize the MMC first\n"); -+ return -1; -+ } -+ -+ mmc_block_size = MMC_BLOCK_SIZE; -+ mmc_block_address = ~(mmc_block_size - 1); -+ -+ dst -= CFG_MMC_BASE; -+ end = dst + size; -+ part_start = ~mmc_block_address & dst; -+ part_end = ~mmc_block_address & end; -+ aligned_start = mmc_block_address & dst; -+ aligned_end = mmc_block_address & end; -+ -+ /* all block aligned accesses */ -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_start) { -+ part_len = mmc_block_size - part_start; -+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) { -+ return -1; -+ } -+ memcpy(mmc_buf+part_start, src, part_len); -+ if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) { -+ return -1; -+ } -+ dst += part_len; -+ src += part_len; -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) { -+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) { -+ return -1; -+ } -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_end && dst < end) { -+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) { -+ return -1; -+ } -+ memcpy(mmc_buf, src, part_end); -+ if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) { -+ return -1; -+ } -+ } -+ return 0; -+} -+ -+ulong -+/****************************************************/ -+mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst) -+/****************************************************/ -+{ -+ int mmc_block_size = MMC_BLOCK_SIZE; -+ ulong src = blknr * mmc_block_size + CFG_MMC_BASE; -+ -+ mmc_read(src, (uchar *)dst, blkcnt*mmc_block_size); -+ return blkcnt; -+} -+ -+static u_int16_t rca = MMC_DEFAULT_RCA; -+ -+static u_int32_t mmc_size(const struct mmc_csd *csd) -+{ -+ u_int32_t block_len, mult, blocknr; -+ -+ block_len = csd->read_bl_len << 12; -+ mult = csd->c_size_mult1 << 8; -+ blocknr = (csd->c_size+1) * mult; -+ -+ return blocknr * block_len; -+} -+ -+int -+/****************************************************/ -+mmc_init(int verbose) -+/****************************************************/ -+{ -+ int retries, rc = -ENODEV; -+ int is_sd = 0; -+ u_int32_t *resp; -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ -+ sdi = S3C2410_GetBase_SDI(); -+ -+ debug("mmc_init(PCLK=%u)\n", get_PCLK()); -+ -+ clk_power->CLKCON |= (1 << 9); -+ -+ /* S3C2410 has some bug that prevents reliable operation at higher speed */ -+ //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ -+ sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ -+ sdi->SDIBSIZE = 512; -+ sdi->SDIDTIMER = 0xffff; -+ sdi->SDIIMSK = 0x0; -+ sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK; -+ udelay(125000); /* FIXME: 74 SDCLK cycles */ -+ -+ mmc_csd.c_size = 0; -+ -+ /* reset */ -+ retries = 10; -+ resp = mmc_cmd(MMC_CMD_RESET, 0, 0); -+ -+ printf("trying to detect SD Card...\n"); -+ while (retries--) { -+ int i; -+ udelay(100000); -+ resp = mmc_cmd(55, 0x00000000, CMD_F_RESP); -+ resp = mmc_cmd(41, 0x00300000, CMD_F_RESP); -+ -+ if (resp[0] & (1 << 31)) { -+ is_sd = 1; -+ break; -+ } -+ } -+ -+ if (retries == 0 && !is_sd) { -+ retries = 10; -+ printf("failed to detect SD Card, trying MMC\n"); -+ resp = mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ffc000, CMD_F_RESP); -+ while (retries-- && resp && !(resp[4] & 0x80)) { -+ debug("resp %x %x\n", resp[0], resp[1]); -+ udelay(50); -+ resp = mmc_cmd(1, 0x00ffff00, CMD_F_RESP); -+ } -+ } -+ -+ /* try to get card id */ -+ resp = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, CMD_F_RESP|CMD_F_RESP_LONG); -+ if (resp) { -+ /* TODO configure mmc driver depending on card attributes */ -+ mmc_cid_t *cid = (mmc_cid_t *)resp; -+ if (verbose) { -+ printf("MMC found. Card desciption is:\n"); -+ printf("Manufacturer ID = %02x%02x%02x\n", -+ cid->id[0], cid->id[1], cid->id[2]); -+ printf("HW/FW Revision = %x %x\n",cid->hwrev, cid->fwrev); -+ cid->hwrev = cid->fwrev = 0; /* null terminate string */ -+ printf("Product Name = %s\n",cid->name); -+ printf("Serial Number = %02x%02x%02x\n", -+ cid->sn[0], cid->sn[1], cid->sn[2]); -+ printf("Month = %d\n",cid->month); -+ printf("Year = %d\n",1997 + cid->year); -+ } -+ /* fill in device description */ -+ mmc_dev.if_type = IF_TYPE_MMC; -+ mmc_dev.part_type = PART_TYPE_DOS; -+ mmc_dev.dev = 0; -+ mmc_dev.lun = 0; -+ mmc_dev.type = 0; -+ /* FIXME fill in the correct size (is set to 32MByte) */ -+ mmc_dev.blksz = 512; -+ mmc_dev.lba = 0x10000; -+ sprintf(mmc_dev.vendor,"Man %02x%02x%02x Snr %02x%02x%02x", -+ cid->id[0], cid->id[1], cid->id[2], -+ cid->sn[0], cid->sn[1], cid->sn[2]); -+ sprintf(mmc_dev.product,"%s",cid->name); -+ sprintf(mmc_dev.revision,"%x %x",cid->hwrev, cid->fwrev); -+ mmc_dev.removable = 0; -+ mmc_dev.block_read = mmc_bread; -+ -+ /* MMC exists, get CSD too */ -+ resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, CMD_F_RESP); -+ if (is_sd) -+ rca = resp[0] >> 16; -+ -+ resp = mmc_cmd(MMC_CMD_SEND_CSD, rca<<16, CMD_F_RESP|CMD_F_RESP_LONG); -+ if (resp) { -+ mmc_csd_t *csd = (mmc_csd_t *)resp; -+ memcpy(&mmc_csd, csd, sizeof(csd)); -+ rc = 0; -+ mmc_ready = 1; -+ /* FIXME add verbose printout for csd */ -+ printf("READ_BL_LEN=%u, C_SIZE_MULT=%u, C_SIZE=%u\n", -+ csd->read_bl_len, csd->c_size_mult1, csd->c_size); -+ printf("size = %u\n", mmc_size(csd)); -+ } -+ } -+ -+ resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca<<16, CMD_F_RESP); -+ -+#ifdef CONFIG_MMC_WIDE -+ if (is_sd) { -+ resp = mmc_cmd(55, rca<<16, CMD_F_RESP); -+ resp = mmc_cmd(6, 0x02, CMD_F_RESP); -+ wide = 1; -+ } -+#endif -+ -+ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */ -+ -+ return rc; -+} -+ -+int -+mmc_ident(block_dev_desc_t *dev) -+{ -+ return 0; -+} -+ -+int -+mmc2info(ulong addr) -+{ -+ /* FIXME hard codes to 32 MB device */ -+ if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) { -+ return 1; -+ } -+ return 0; -+} -+ -+#endif /* CONFIG_MMC */ -diff --git a/cpu/arm920t/s3c24x0/nand.c b/cpu/arm920t/s3c24x0/nand.c -new file mode 100644 -index 0000000..f720229 ---- /dev/null -+++ b/cpu/arm920t/s3c24x0/nand.c -@@ -0,0 +1,212 @@ -+/* -+ * (C) Copyright 2006 Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+#if 0 -+#define DEBUGN printf -+#else -+#define DEBUGN(x, args ...) {} -+#endif -+ -+#if (CONFIG_COMMANDS & CFG_CMD_NAND) -+#if !defined(CFG_NAND_LEGACY) -+ -+#include <nand.h> -+#include <s3c2410.h> -+ -+#define __REGb(x) (*(volatile unsigned char *)(x)) -+#define __REGi(x) (*(volatile unsigned int *)(x)) -+ -+#define NF_BASE 0x4e000000 -+#define NFCONF __REGi(NF_BASE + 0x0) -+#define NFCMD __REGb(NF_BASE + 0x4) -+#define NFADDR __REGb(NF_BASE + 0x8) -+#define NFDATA __REGb(NF_BASE + 0xc) -+#define NFSTAT __REGb(NF_BASE + 0x10) -+ -+#define S3C2410_NFCONF_EN (1<<15) -+#define S3C2410_NFCONF_512BYTE (1<<14) -+#define S3C2410_NFCONF_4STEP (1<<13) -+#define S3C2410_NFCONF_INITECC (1<<12) -+#define S3C2410_NFCONF_nFCE (1<<11) -+#define S3C2410_NFCONF_TACLS(x) ((x)<<8) -+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) -+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) -+ -+static u16 s3c2410_read_word(struct mtd_info *mtd) -+{ -+ unsigned char byte = 0; -+ -+ printf("s3c2410_read_word: WARNING, this function is not implemented yet\n"); -+ return byte; -+} -+ -+static void s3c2410_write_word(struct mtd_info *mtd, u16 word) -+{ -+ printf("s3c2410_write_word: WARNING, this function is not implemented yet\n"); -+} -+ -+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ DEBUGN("hwcontrol(): 0x%02x: ", cmd); -+ -+ switch (cmd) { -+ case NAND_CTL_SETNCE: -+ NFCONF &= ~S3C2410_NFCONF_nFCE; -+ DEBUGN("NFCONF=0x%08x\n", NFCONF); -+ break; -+ case NAND_CTL_CLRNCE: -+ NFCONF |= S3C2410_NFCONF_nFCE; -+ DEBUGN("NFCONF=0x%08x\n", NFCONF); -+ break; -+ case NAND_CTL_SETALE: -+ chip->IO_ADDR_W = NF_BASE + 0x8; -+ DEBUGN("SETALE\n"); -+ break; -+ case NAND_CTL_SETCLE: -+ chip->IO_ADDR_W = NF_BASE + 0x4; -+ DEBUGN("SETCLE\n"); -+ break; -+ default: -+ chip->IO_ADDR_W = NF_BASE + 0xc; -+ break; -+ } -+ return; -+} -+ -+static int s3c2410_dev_ready(struct mtd_info *mtd) -+{ -+ DEBUGN("dev_ready\n"); -+ return (NFSTAT & 0x01); -+} -+ -+static void s3c2410_cmdfunc(struct mtd_info *mtd, unsigned cmd, -+ int column, int page_addr) -+{ -+ DEBUGN("cmdfunc(): 0x%02x, col=%d, page=%d\n", cmd, column, page_addr); -+ -+ switch (cmd) { -+ case NAND_CMD_READ0: -+ case NAND_CMD_READ1: -+ case NAND_CMD_READOOB: -+ NFCMD = cmd; -+ NFADDR = column & 0xff; -+ NFADDR = page_addr & 0xff; -+ NFADDR = (page_addr >> 8) & 0xff; -+ NFADDR = (page_addr >> 16) & 0xff; -+ break; -+ case NAND_CMD_READID: -+ NFCMD = cmd; -+ NFADDR = 0; -+ break; -+ case NAND_CMD_PAGEPROG: -+ NFCMD = cmd; -+ printf("PAGEPROG not implemented\n"); -+ break; -+ case NAND_CMD_ERASE1: -+ NFCMD = cmd; -+ NFADDR = page_addr & 0xff; -+ NFADDR = (page_addr >> 8) & 0xff; -+ NFADDR = (page_addr >> 16) & 0xff; -+ break; -+ case NAND_CMD_ERASE2: -+ NFCMD = cmd; -+ break; -+ case NAND_CMD_SEQIN: -+ printf("SEQIN not implemented\n"); -+ break; -+ case NAND_CMD_STATUS: -+ NFCMD = cmd; -+ break; -+ case NAND_CMD_RESET: -+ NFCMD = cmd; -+ break; -+ default: -+ break; -+ } -+ -+ while (!s3c2410_dev_ready(mtd)); -+} -+ -+void board_nand_init(struct nand_chip *nand) -+{ -+ u_int32_t cfg; -+ u_int8_t tacls, twrph0, twrph1; -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ -+ DEBUGN("board_nand_init()\n"); -+ -+ clk_power->CLKCON |= (1 << 4); -+ -+ /* initialize hardware */ -+ twrph0 = 3; twrph1 = 0; tacls = 0; -+ -+ /* default timings: maximum */ -+ //twrph0 = 8; twrph1 = 8; tacls = 8; -+ -+ cfg = S3C2410_NFCONF_EN; -+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1); -+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); -+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); -+ -+ //NFCONF = cfg; -+ NFCONF = 0xf842; -+ -+ /* initialize nand_chip data structure */ -+ nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c; -+ -+ /* read_buf and write_buf are default */ -+ /* read_byte and write_byte are default */ -+ -+ /* need to override word read/write since default routines try 16bit wide -+ * register access of an (in our case) 8bit register */ -+ nand->read_word = s3c2410_read_word; -+ nand->write_word = s3c2410_write_word; -+ -+ /* hwcontrol always must be implemented */ -+ nand->hwcontrol = s3c2410_hwcontrol; -+ -+ nand->dev_ready = s3c2410_dev_ready; -+ -+ nand->eccmode = NAND_ECC_SOFT; -+ nand->options = 0; -+ //nand->waitfunc = dfc_wait; -+ -+ //nand->cmdfunc = s3c2410_cmdfunc; -+ //nand->autooob = &delta_oob; -+ //nand->badblock_pattern = &delta_bbt_descr; -+ -+#if 0 -+ /* reset */ -+ nand->hwcontrol(NULL, NAND_CTL_SETNCE); -+ nand->cmdfunc(NULL, NAND_CMD_RESET, -1, -1); -+ while (nand->dev_ready(NULL) == 0) {} -+ nand->hwcontrol(NULL, NAND_CTL_CLRNCE); -+#endif -+ -+ DEBUGN("end of nand_init\n"); -+} -+ -+#else -+ #error "U-Boot legacy NAND support not available for S3C2410" -+#endif -+#endif -diff --git a/cpu/arm920t/s3c24x0/nand_read.c b/cpu/arm920t/s3c24x0/nand_read.c -new file mode 100644 -index 0000000..9d97932 ---- /dev/null -+++ b/cpu/arm920t/s3c24x0/nand_read.c -@@ -0,0 +1,75 @@ -+/* -+ * nand_read.c: Simple NAND read functions for booting from NAND -+ * -+ * Taken from GPLv2 licensed vivi bootloader, -+ * Copyright (C) 2002 MIZI Research, Inc. -+ * -+ * Author: Hwang, Chideok <hwang@mizi.com> -+ * Date : $Date: 2004/02/04 10:37:37 $ -+ * -+ * u-boot integration (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ */ -+ -+#include <common.h> -+ -+#ifdef CONFIG_S3C2410_NAND_BOOT -+ -+#define __REGb(x) (*(volatile unsigned char *)(x)) -+#define __REGi(x) (*(volatile unsigned int *)(x)) -+#define NF_BASE 0x4e000000 -+#define NFCONF __REGi(NF_BASE + 0x0) -+#define NFCMD __REGb(NF_BASE + 0x4) -+#define NFADDR __REGb(NF_BASE + 0x8) -+#define NFDATA __REGb(NF_BASE + 0xc) -+#define NFSTAT __REGb(NF_BASE + 0x10) -+ -+#define BUSY 1 -+inline void wait_idle(void) { -+ int i; -+ -+ while(!(NFSTAT & BUSY)) -+ for(i=0; i<10; i++); -+} -+ -+#define NAND_SECTOR_SIZE 512 -+#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1) -+ -+/* low level nand read function */ -+int -+nand_read_ll(unsigned char *buf, unsigned long start_addr, int size) -+{ -+ int i, j; -+ -+ if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) { -+ return -1; /* invalid alignment */ -+ } -+ -+ /* chip Enable */ -+ NFCONF &= ~0x800; -+ for(i=0; i<10; i++); -+ -+ for(i=start_addr; i < (start_addr + size);) { -+ /* READ0 */ -+ NFCMD = 0; -+ -+ /* Write Address */ -+ NFADDR = i & 0xff; -+ NFADDR = (i >> 9) & 0xff; -+ NFADDR = (i >> 17) & 0xff; -+ NFADDR = (i >> 25) & 0xff; -+ -+ wait_idle(); -+ -+ for(j=0; j < NAND_SECTOR_SIZE; j++, i++) { -+ *buf = (NFDATA & 0xff); -+ buf++; -+ } -+ } -+ -+ /* chip Disable */ -+ NFCONF |= 0x800; /* chip disable */ -+ -+ return 0; -+} -+ -+#endif /* CONFIG_S3C2410_NAND_BOOT */ -diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S -index 346f0d0..232e2c2 100644 ---- a/cpu/arm920t/start.S -+++ b/cpu/arm920t/start.S -@@ -5,6 +5,10 @@ - * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> - * Copyright (c) 2002 Gary Jennejohn <gj@denx.de> - * -+ * S3C2410 NAND portions -+ * Copyright (c) 2001 MIZI Research, Inc. -+ * Copyright (c) 2006 Harald Welte <hwelte@hmw-consulting.de> -+ * - * See file CREDITS for list of people who contributed to this - * project. - * -@@ -27,6 +31,7 @@ - - #include <config.h> - #include <version.h> -+#include <s3c2410.h> - - - /* -@@ -161,6 +166,7 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT - #endif - - #ifndef CONFIG_SKIP_RELOCATE_UBOOT -+#ifndef CONFIG_S3C2410_NAND_BOOT - relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ -@@ -177,6 +183,93 @@ copy_loop: - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end addreee [r2] */ - ble copy_loop -+#else /* NAND_BOOT */ -+relocate: -+copy_myself: -+ /* mov r10, lr */ -+ -+ @ reset NAND -+ mov r1, #S3C2410_NAND_BASE -+ ldr r2, =0xf842 @ initial value enable tacls=3,rph0=6,rph1=0 -+ str r2, [r1, #oNFCONF] -+ ldr r2, [r1, #oNFCONF] -+ bic r2, r2, #0x800 @ enable chip -+ str r2, [r1, #oNFCONF] -+ mov r2, #0xff @ RESET command -+ strb r2, [r1, #oNFCMD] -+ mov r3, #0 @ wait -+1: add r3, r3, #0x1 -+ cmp r3, #0xa -+ blt 1b -+2: ldr r2, [r1, #oNFSTAT] @ wait ready -+ tst r2, #0x1 -+ beq 2b -+ ldr r2, [r1, #oNFCONF] -+ orr r2, r2, #0x800 @ disable chip -+ str r2, [r1, #oNFCONF] -+ -+#if 0 -+ @ get ready to call C functions (for nand_read()) -+ ldr sp, DW_STACK_START @ setup stack pointer -+ mov fp, #0 @ no previous frame, so fp=0 -+#else -+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ -+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ -+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ -+#ifdef CONFIG_USE_IRQ -+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -+#endif -+ sub sp, r0, #12 /* leave 3 words for abort-stack */ -+#endif -+ -+ @ copy u-boot to RAM -+ ldr r0, _TEXT_BASE -+ mov r1, #0x0 -+ mov r2, #0x30000 -+ bl nand_read_ll -+ -+ tst r0, #0x0 -+ beq ok_nand_read -+#ifdef CONFIG_DEBUG_LL -+bad_nand_read: -+ ldr r0, STR_FAIL -+ ldr r1, SerBase -+ bl PrintWord -+1: b 1b @ infinite loop -+#endif -+ -+ok_nand_read: -+#ifdef CONFIG_DEBUG_LL -+ ldr r0, STR_OK -+ ldr r1, SerBase -+ bl PrintWord -+#endif -+ -+ @ verify -+ mov r0, #0 -+ @ldr r1, =0x33f00000 -+ ldr r1, _TEXT_BASE -+ mov r2, #0x400 @ 4 bytes * 1024 = 4K-bytes -+go_next: -+ ldr r3, [r0], #4 -+ ldr r4, [r1], #4 -+ teq r3, r4 -+ bne notmatch -+ subs r2, r2, #4 -+ beq done_nand_read -+ bne go_next -+notmatch: -+#ifdef CONFIG_DEBUG_LL -+ sub r0, r0, #4 -+ ldr r1, SerBase -+ bl PrintHexWord -+ ldr r0, STR_FAIL -+ ldr r1, SerBase -+ bl PrintWord -+#endif -+1: b 1b -+done_nand_read: -+#endif /* NAND_BOOT */ - #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -diff --git a/drivers/Makefile b/drivers/Makefile -index 9be95c7..eef266a 100644 ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -50,7 +50,7 @@ OBJS = 3c589.o 5701rls.o ali512x.o \ - videomodes.o w83c553f.o \ - ks8695eth.o \ - pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ -- rpx_pcmcia.o -+ rpx_pcmcia.o s3c2410_fb.o - - all: $(LIB) - -diff --git a/drivers/cs8900.c b/drivers/cs8900.c -index 082434c..1cce622 100644 ---- a/drivers/cs8900.c -+++ b/drivers/cs8900.c -@@ -120,6 +120,7 @@ void cs8900_get_enetaddr (uchar * addr) - unsigned char env_enetaddr[6]; - char *tmp = getenv ("ethaddr"); - char *end; -+ unsigned short chip_id; - - for (i=0; i<6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; -@@ -128,7 +129,9 @@ void cs8900_get_enetaddr (uchar * addr) - } - - /* verify chip id */ -- if (get_reg_init_bus (PP_ChipID) != 0x630e) -+ chip_id = get_reg_init_bus (PP_ChipID); -+ printf("\ncs8900a chipid 0x%04x\n", chip_id); -+ if (chip_id != 0x630e) - return; - eth_reset (); - if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) == -diff --git a/drivers/s3c2410_fb.c b/drivers/s3c2410_fb.c -new file mode 100644 -index 0000000..fc389a9 ---- /dev/null -+++ b/drivers/s3c2410_fb.c -@@ -0,0 +1,182 @@ -+/* -+ * (C) Copyright 2006 Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+#if defined(CONFIG_VIDEO_S3C2410) -+ -+#include <video_fb.h> -+#include "videomodes.h" -+#include <s3c2410.h> -+/* -+ * Export Graphic Device -+ */ -+GraphicDevice smi; -+ -+#define VIDEO_MEM_SIZE 0x200000 -+ -+/******************************************************************************* -+ * -+ * Init video chip with common Linux graphic modes (lilo) -+ */ -+void *video_hw_init (void) -+{ -+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); -+ GraphicDevice *pGD = (GraphicDevice *)&smi; -+ int videomode; -+ unsigned long t1, hsynch, vsynch; -+ char *penv; -+ int tmp, i, bits_per_pixel; -+ struct ctfb_res_modes *res_mode; -+ struct ctfb_res_modes var_mode; -+ unsigned char videoout; -+ unsigned int *vm; -+ -+ /* Search for video chip */ -+ printf("Video: "); -+ -+ tmp = 0; -+ -+ videomode = CFG_DEFAULT_VIDEO_MODE; -+ /* get video mode via environment */ -+ if ((penv = getenv ("videomode")) != NULL) { -+ /* deceide if it is a string */ -+ if (penv[0] <= '9') { -+ videomode = (int) simple_strtoul (penv, NULL, 16); -+ tmp = 1; -+ } -+ } else { -+ tmp = 1; -+ } -+ if (tmp) { -+ /* parameter are vesa modes */ -+ /* search params */ -+ for (i = 0; i < VESA_MODES_COUNT; i++) { -+ if (vesa_modes[i].vesanr == videomode) -+ break; -+ } -+ if (i == VESA_MODES_COUNT) { -+ printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE); -+ i = 0; -+ } -+ res_mode = -+ (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i]. -+ resindex]; -+ bits_per_pixel = vesa_modes[i].bits_per_pixel; -+ } else { -+ -+ res_mode = (struct ctfb_res_modes *) &var_mode; -+ bits_per_pixel = video_get_params (res_mode, penv); -+ } -+ -+ /* calculate hsynch and vsynch freq (info only) */ -+ t1 = (res_mode->left_margin + res_mode->xres + -+ res_mode->right_margin + res_mode->hsync_len) / 8; -+ t1 *= 8; -+ t1 *= res_mode->pixclock; -+ t1 /= 1000; -+ hsynch = 1000000000L / t1; -+ t1 *= -+ (res_mode->upper_margin + res_mode->yres + -+ res_mode->lower_margin + res_mode->vsync_len); -+ t1 /= 1000; -+ vsynch = 1000000000L / t1; -+ -+ /* fill in Graphic device struct */ -+ sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres, -+ res_mode->yres, bits_per_pixel, (hsynch / 1000), -+ (vsynch / 1000)); -+ printf ("%s\n", pGD->modeIdent); -+ pGD->winSizeX = res_mode->xres; -+ pGD->winSizeY = res_mode->yres; -+ pGD->plnSizeX = res_mode->xres; -+ pGD->plnSizeY = res_mode->yres; -+ switch (bits_per_pixel) { -+ case 8: -+ pGD->gdfBytesPP = 1; -+ pGD->gdfIndex = GDF__8BIT_INDEX; -+ break; -+ case 15: -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_15BIT_555RGB; -+ break; -+ case 16: -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_16BIT_565RGB; -+ break; -+ case 24: -+ pGD->gdfBytesPP = 3; -+ pGD->gdfIndex = GDF_24BIT_888RGB; -+ break; -+ } -+ -+#if 0 -+ pGD->isaBase = CFG_ISA_IO; -+ pGD->pciBase = pci_mem_base; -+ pGD->dprBase = (pci_mem_base + 0x400000 + 0x8000); -+ pGD->vprBase = (pci_mem_base + 0x400000 + 0xc000); -+ pGD->cprBase = (pci_mem_base + 0x400000 + 0xe000); -+#endif -+ pGD->frameAdrs = LCD_VIDEO_ADDR; -+ pGD->memSize = VIDEO_MEM_SIZE; -+ -+ lcd->LCDSADDR1 = LCD_VIDEO_ADDR >> 1; -+ lcd->LCDSADDR2 = (LCD_VIDEO_ADDR + 0x4b000) >> 1; -+ lcd->LCDSADDR3 = 0x000000f0; -+ -+ lcd->LCDCON1 = 0x00000479; -+ lcd->LCDCON2 = 0x014fc183; -+ lcd->LCDCON3 = 0x0060ef07; -+ lcd->LCDCON4 = 0x00000003; -+ lcd->LCDCON5 = 0x00000b09; -+ lcd->LPCSEL = 0x00000cf0; -+ -+ pGD->winSizeX = pGD->plnSizeX = 240; -+ pGD->winSizeY = pGD->plnSizeY = 320; -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_16BIT_565RGB; -+ -+ /* Enable Display */ -+ videoout = 2; /* Default output is CRT */ -+ if ((penv = getenv ("videoout")) != NULL) { -+ /* deceide if it is a string */ -+ videoout = (int) simple_strtoul (penv, NULL, 16); -+ } -+ -+ printf("clearing video memory\n"); -+ /* Clear video memory */ -+ i = pGD->memSize/4; -+ vm = (unsigned int *)pGD->frameAdrs; -+ while(i--) -+ *vm++ = 0; -+ -+ printf("returning from video_hw_init\n"); -+ return ((void*)&smi); -+} -+ -+void -+video_set_lut (unsigned int index, /* color number */ -+ unsigned char r, /* red */ -+ unsigned char g, /* green */ -+ unsigned char b /* blue */ -+ ) -+{ -+} -+ -+#endif /* CONFIG_VIDEO_S3C2410 */ -diff --git a/drivers/usbdcore_s3c2410.c b/drivers/usbdcore_s3c2410.c -new file mode 100644 -index 0000000..143fdf2 ---- /dev/null -+++ b/drivers/usbdcore_s3c2410.c -@@ -0,0 +1,1609 @@ -+/* -+ * (C) Copyright 2003 -+ * Gerry Hamel, geh@ti.com, Texas Instruments -+ * -+ * Based on -+ * linux/drivers/usb/device/bi/omap.c -+ * TI OMAP1510 USB bus interface driver -+ * -+ * Author: MontaVista Software, Inc. -+ * source@mvista.com -+ * (C) Copyright 2002 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ */ -+ -+#include <common.h> -+ -+#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE) -+ -+#include <asm/io.h> -+ -+#include "usbdcore.h" -+#include "usbdcore_s3c2410.h" -+#include "usbdcore_ep0.h" -+ -+ -+#define UDC_INIT_MDELAY 80 /* Device settle delay */ -+#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */ -+ -+/* Some kind of debugging output... */ -+#if 1 -+#define UDCDBG(str) -+#define UDCDBGA(fmt,args...) -+#else /* The bugs still exists... */ -+#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__) -+#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args) -+#endif -+ -+#if 1 -+#define UDCREG(name) -+#define UDCREGL(name) -+#else /* The bugs still exists... */ -+#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */ -+#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */ -+#endif -+ -+ -+static struct urb *ep0_urb = NULL; -+ -+static struct usb_device_instance *udc_device; /* Used in interrupt handler */ -+static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */ -+static u32 udc_interrupts = 0; -+ -+static void udc_stall_ep (unsigned int ep_addr); -+ -+ -+static struct usb_endpoint_instance *s3c2410_find_ep (int ep) -+{ -+ int i; -+ -+ for (i = 0; i < udc_device->bus->max_endpoints; i++) { -+ if (udc_device->bus->endpoint_array[i].endpoint_address == ep) -+ return &udc_device->bus->endpoint_array[i]; -+ } -+ return NULL; -+} -+ -+/* ************************************************************************** */ -+/* IO -+ */ -+ -+/* -+ * omap1510_prepare_endpoint_for_rx -+ * -+ * This function implements TRM Figure 14-11. -+ * -+ * The endpoint to prepare for transfer is specified as a physical endpoint -+ * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint -+ * configuration register is checked to see if the endpoint is ISO or not. -+ * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled. -+ * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30. -+ */ -+static void omap1510_prepare_endpoint_for_rx (int ep_addr) -+{ -+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; -+ -+ UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr); -+ if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) { -+ if ((inw (UDC_EP_RX (ep_num)) & -+ (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) == -+ UDC_EPn_RX_Valid) { -+ /* rx endpoint is valid, non-ISO, so enable its FIFO */ -+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ outw (0, UDC_EP_NUM); -+ } -+ } -+} -+ -+/* omap1510_configure_endpoints -+ * -+ * This function implements TRM Figure 14-10. -+ */ -+static void omap1510_configure_endpoints (struct usb_device_instance *device) -+{ -+ int ep; -+ struct usb_bus_instance *bus; -+ struct usb_endpoint_instance *endpoint; -+ unsigned short ep_ptr; -+ unsigned short ep_size; -+ unsigned short ep_isoc; -+ unsigned short ep_doublebuffer; -+ int ep_addr; -+ int packet_size; -+ int buffer_size; -+ int attributes; -+ -+ bus = device->bus; -+ -+ /* There is a dedicated 2048 byte buffer for USB packets that may be -+ * arbitrarily partitioned among the endpoints on 8-byte boundaries. -+ * The first 8 bytes are reserved for receiving setup packets on -+ * endpoint 0. -+ */ -+ ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */ -+ -+ for (ep = 0; ep < bus->max_endpoints; ep++) { -+ endpoint = bus->endpoint_array + ep; -+ ep_addr = endpoint->endpoint_address; -+ if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ /* IN endpoint */ -+ packet_size = endpoint->tx_packetSize; -+ attributes = endpoint->tx_attributes; -+ } else { -+ /* OUT endpoint */ -+ packet_size = endpoint->rcv_packetSize; -+ attributes = endpoint->rcv_attributes; -+ } -+ -+ switch (packet_size) { -+ case 0: -+ ep_size = 0; -+ break; -+ case 8: -+ ep_size = 0; -+ break; -+ case 16: -+ ep_size = 1; -+ break; -+ case 32: -+ ep_size = 2; -+ break; -+ case 64: -+ ep_size = 3; -+ break; -+ case 128: -+ ep_size = 4; -+ break; -+ case 256: -+ ep_size = 5; -+ break; -+ case 512: -+ ep_size = 6; -+ break; -+ default: -+ UDCDBGA ("ep 0x%02x has bad packet size %d", -+ ep_addr, packet_size); -+ packet_size = 0; -+ ep_size = 0; -+ break; -+ } -+ -+ switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) { -+ case USB_ENDPOINT_XFER_CONTROL: -+ case USB_ENDPOINT_XFER_BULK: -+ case USB_ENDPOINT_XFER_INT: -+ default: -+ /* A non-isochronous endpoint may optionally be -+ * double-buffered. For now we disable -+ * double-buffering. -+ */ -+ ep_doublebuffer = 0; -+ ep_isoc = 0; -+ if (packet_size > 64) -+ packet_size = 0; -+ if (!ep || !ep_doublebuffer) -+ buffer_size = packet_size; -+ else -+ buffer_size = packet_size * 2; -+ break; -+ case USB_ENDPOINT_XFER_ISOC: -+ /* Isochronous endpoints are always double- -+ * buffered, but the double-buffering bit -+ * in the endpoint configuration register -+ * becomes the msb of the endpoint size so we -+ * set the double-buffering flag to zero. -+ */ -+ ep_doublebuffer = 0; -+ ep_isoc = 1; -+ buffer_size = packet_size * 2; -+ break; -+ } -+ -+ /* check to see if our packet buffer RAM is exhausted */ -+ if ((ep_ptr + buffer_size) > 2048) { -+ UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size); -+ buffer_size = packet_size = 0; -+ } -+ -+ /* force a default configuration for endpoint 0 since it is -+ * always enabled -+ */ -+ if (!ep && ((packet_size < 8) || (packet_size > 64))) { -+ buffer_size = packet_size = 64; -+ ep_size = 3; -+ } -+ -+ if (!ep) { -+ /* configure endpoint 0 */ -+ outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0); -+ /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */ -+ /* ep_ptr, packet_size); */ -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ /* IN endpoint */ -+ if (packet_size) { -+ outw ((1 << 15) | (ep_doublebuffer << 14) | -+ (ep_size << 12) | (ep_isoc << 11) | -+ (ep_ptr >> 3), -+ UDC_EP_TX (ep_addr & -+ USB_ENDPOINT_NUMBER_MASK)); -+ UDCDBGA ("IN ep %d buffer offset 0x%03x" -+ " packet size 0x%03x", -+ ep_addr & USB_ENDPOINT_NUMBER_MASK, -+ ep_ptr, packet_size); -+ } else { -+ outw (0, -+ UDC_EP_TX (ep_addr & -+ USB_ENDPOINT_NUMBER_MASK)); -+ } -+ } else { -+ /* OUT endpoint */ -+ if (packet_size) { -+ outw ((1 << 15) | (ep_doublebuffer << 14) | -+ (ep_size << 12) | (ep_isoc << 11) | -+ (ep_ptr >> 3), -+ UDC_EP_RX (ep_addr & -+ USB_ENDPOINT_NUMBER_MASK)); -+ UDCDBGA ("OUT ep %d buffer offset 0x%03x" -+ " packet size 0x%03x", -+ ep_addr & USB_ENDPOINT_NUMBER_MASK, -+ ep_ptr, packet_size); -+ } else { -+ outw (0, -+ UDC_EP_RX (ep_addr & -+ USB_ENDPOINT_NUMBER_MASK)); -+ } -+ } -+ ep_ptr += buffer_size; -+ } -+} -+ -+static void s3c2410_deconfigure_device (void) -+{ -+ int epnum; -+ -+ UDCDBG ("clear Cfg_Lock"); -+ outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1); -+ UDCREG (UDC_SYSCON1); -+ -+ /* deconfigure all endpoints */ -+ for (epnum = 1; epnum <= 15; epnum++) { -+ outw (0, UDC_EP_RX (epnum)); -+ outw (0, UDC_EP_TX (epnum)); -+ } -+} -+ -+static void s3c2410_configure_device (struct usb_device_instance *device) -+{ -+ u_int32_t tmp; -+ -+ s3c2410_configure_endpoints(device); -+ -+ /* disable EP0-4 SUBD interrupts ? */ -+ outw(0x00, S3C2410_UDC_USB_INT_EN_REG); -+ -+ /* UPLL already configured by board-level init code */ -+ -+ /* configure USB pads to device mode */ -+ tmp = inw(S3C2410_MISCCR); -+ tmp &= ~(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND1); -+ outw(tmp, S3C2410_MISCCR); -+ -+ tmp = inb(S3C2410_CLKSLOW); -+ tmp &= ~S3C2410_CLKSLOW_USB_CLK_DISABLE; -+ outw(tmp, S3C2410_CLKSLOW); -+ -+ /* clear interrupt registers */ -+ inb(S3C2410_UDC_EP_INT_REG); -+ inb(S3C2410_UDC_USB_INT_REG); -+ -+ /* enable USB interrupts for RESET and SUSPEND/RESUME */ -+ outb(S3C2410_UDC_USBINT_RESET|S3C2410_UDC_USBINT_SUSPEND, -+ S3C2410_UDC_USB_INT_EN_REG); -+ -+} -+ -+/* omap1510_write_noniso_tx_fifo -+ * -+ * This function implements TRM Figure 14-30. -+ * -+ * If the endpoint has an active tx_urb, then the next packet of data from the -+ * URB is written to the tx FIFO. The total amount of data in the urb is given -+ * by urb->actual_length. The maximum amount of data that can be sent in any -+ * one packet is given by endpoint->tx_packetSize. The number of data bytes -+ * from this URB that have already been transmitted is given by endpoint->sent. -+ * endpoint->last is updated by this routine with the number of data bytes -+ * transmitted in this packet. -+ * -+ * In accordance with Figure 14-30, the EP_NUM register must already have been -+ * written with the value to select the appropriate tx FIFO before this routine -+ * is called. -+ */ -+static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance -+ *endpoint) -+{ -+ struct urb *urb = endpoint->tx_urb; -+ -+ if (urb) { -+ unsigned int last, i; -+ -+ UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d", -+ urb->buffer, urb->buffer_length, urb->actual_length); -+ if ((last = -+ MIN (urb->actual_length - endpoint->sent, -+ endpoint->tx_packetSize))) { -+ u8 *cp = urb->buffer + endpoint->sent; -+ -+ UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); -+ -+ if (((u32) cp & 1) == 0) { /* word aligned? */ -+ outsw (UDC_DATA, cp, last >> 1); -+ } else { /* byte aligned. */ -+ for (i = 0; i < (last >> 1); i++) { -+ u16 w = ((u16) cp[2 * i + 1] << 8) | -+ (u16) cp[2 * i]; -+ outw (w, UDC_DATA); -+ } -+ } -+ if (last & 1) { -+ outb (*(cp + last - 1), UDC_DATA); -+ } -+ } -+ endpoint->last = last; -+ } -+} -+ -+/* omap1510_read_noniso_rx_fifo -+ * -+ * This function implements TRM Figure 14-28. -+ * -+ * If the endpoint has an active rcv_urb, then the next packet of data is read -+ * from the rcv FIFO and written to rcv_urb->buffer at offset -+ * rcv_urb->actual_length to append the packet data to the data from any -+ * previous packets for this transfer. We assume that there is sufficient room -+ * left in the buffer to hold an entire packet of data. -+ * -+ * The return value is the number of bytes read from the FIFO for this packet. -+ * -+ * In accordance with Figure 14-28, the EP_NUM register must already have been -+ * written with the value to select the appropriate rcv FIFO before this routine -+ * is called. -+ */ -+static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance -+ *endpoint) -+{ -+ struct urb *urb = endpoint->rcv_urb; -+ int len = 0; -+ -+ if (urb) { -+ len = inw (UDC_RXFSTAT); -+ -+ if (len) { -+ unsigned char *cp = urb->buffer + urb->actual_length; -+ -+ insw (UDC_DATA, cp, len >> 1); -+ if (len & 1) -+ *(cp + len - 1) = inb (UDC_DATA); -+ } -+ } -+ return len; -+} -+ -+/* omap1510_prepare_for_control_write_status -+ * -+ * This function implements TRM Figure 14-17. -+ * -+ * We have to deal here with non-autodecoded control writes that haven't already -+ * been dealt with by ep0_recv_setup. The non-autodecoded standard control -+ * write requests are: set/clear endpoint feature, set configuration, set -+ * interface, and set descriptor. ep0_recv_setup handles set/clear requests for -+ * ENDPOINT_HALT by halting the endpoint for a set request and resetting the -+ * endpoint for a clear request. ep0_recv_setup returns an error for -+ * SET_DESCRIPTOR requests which causes them to be terminated with a stall by -+ * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by -+ * generating a DEVICE_SET_INTERFACE event. This leaves only the -+ * SET_CONFIGURATION event for us to deal with here. -+ * -+ */ -+static void omap1510_prepare_for_control_write_status (struct urb *urb) -+{ -+ struct usb_device_request *request = &urb->device_request;; -+ -+ /* check for a SET_CONFIGURATION request */ -+ if (request->bRequest == USB_REQ_SET_CONFIGURATION) { -+ int configuration = le16_to_cpu (request->wValue) & 0xff; -+ unsigned short devstat = inw (UDC_DEVSTAT); -+ -+ if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) { -+ /* device is currently in ADDRESSED state */ -+ if (configuration) { -+ /* Assume the specified non-zero configuration -+ * value is valid and switch to the CONFIGURED -+ * state. -+ */ -+ outw (UDC_Dev_Cfg, UDC_SYSCON2); -+ } -+ } else if ((devstat & UDC_CFG) == UDC_CFG) { -+ /* device is currently in CONFIGURED state */ -+ if (!configuration) { -+ /* Switch to ADDRESSED state. */ -+ outw (UDC_Clr_Cfg, UDC_SYSCON2); -+ } -+ } -+ } -+ -+ /* select EP0 tx FIFO */ -+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); -+ /* clear endpoint (no data bytes in status stage) */ -+ outw (UDC_Clr_EP, UDC_CTRL); -+ /* enable the EP0 tx FIFO */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect the endpoint */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+} -+ -+/* udc_state_transition_up -+ * udc_state_transition_down -+ * -+ * Helper functions to implement device state changes. The device states and -+ * the events that transition between them are: -+ * -+ * STATE_ATTACHED -+ * || /\ -+ * \/ || -+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET -+ * || /\ -+ * \/ || -+ * STATE_POWERED -+ * || /\ -+ * \/ || -+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION -+ * || /\ -+ * \/ || -+ * STATE_DEFAULT -+ * || /\ -+ * \/ || -+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET -+ * || /\ -+ * \/ || -+ * STATE_ADDRESSED -+ * || /\ -+ * \/ || -+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED -+ * || /\ -+ * \/ || -+ * STATE_CONFIGURED -+ * -+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED -+ * to STATE_CONFIGURED) from the specified initial state to the specified final -+ * state, passing through each intermediate state on the way. If the initial -+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then -+ * no state transitions will take place. -+ * -+ * udc_state_transition_down transitions down (in the direction from -+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the -+ * specified final state, passing through each intermediate state on the way. -+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final -+ * state, then no state transitions will take place. -+ * -+ * These functions must only be called with interrupts disabled. -+ */ -+static void udc_state_transition_up (usb_device_state_t initial, -+ usb_device_state_t final) -+{ -+ if (initial < final) { -+ switch (initial) { -+ case STATE_ATTACHED: -+ usbd_device_event_irq (udc_device, -+ DEVICE_HUB_CONFIGURED, 0); -+ if (final == STATE_POWERED) -+ break; -+ case STATE_POWERED: -+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0); -+ if (final == STATE_DEFAULT) -+ break; -+ case STATE_DEFAULT: -+ usbd_device_event_irq (udc_device, -+ DEVICE_ADDRESS_ASSIGNED, 0); -+ if (final == STATE_ADDRESSED) -+ break; -+ case STATE_ADDRESSED: -+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, -+ 0); -+ case STATE_CONFIGURED: -+ break; -+ default: -+ break; -+ } -+ } -+} -+ -+static void udc_state_transition_down (usb_device_state_t initial, -+ usb_device_state_t final) -+{ -+ if (initial > final) { -+ switch (initial) { -+ case STATE_CONFIGURED: -+ usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0); -+ if (final == STATE_ADDRESSED) -+ break; -+ case STATE_ADDRESSED: -+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0); -+ if (final == STATE_DEFAULT) -+ break; -+ case STATE_DEFAULT: -+ usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0); -+ if (final == STATE_POWERED) -+ break; -+ case STATE_POWERED: -+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0); -+ case STATE_ATTACHED: -+ break; -+ default: -+ break; -+ } -+ } -+} -+ -+/* Handle all device state changes. -+ * This function implements TRM Figure 14-21. -+ */ -+static void omap1510_udc_state_changed (void) -+{ -+ u16 bits; -+ u16 devstat = inw (UDC_DEVSTAT); -+ -+ UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat); -+ -+ bits = devstat ^ udc_devstat; -+ if (bits) { -+ if (bits & UDC_ATT) { -+ if (devstat & UDC_ATT) { -+ UDCDBG ("device attached and powered"); -+ udc_state_transition_up (udc_device->device_state, STATE_POWERED); -+ } else { -+ UDCDBG ("device detached or unpowered"); -+ udc_state_transition_down (udc_device->device_state, STATE_ATTACHED); -+ } -+ } -+ if (bits & UDC_USB_Reset) { -+ if (devstat & UDC_USB_Reset) { -+ UDCDBG ("device reset in progess"); -+ udc_state_transition_down (udc_device->device_state, STATE_POWERED); -+ } else { -+ UDCDBG ("device reset completed"); -+ } -+ } -+ if (bits & UDC_DEF) { -+ if (devstat & UDC_DEF) { -+ UDCDBG ("device entering default state"); -+ udc_state_transition_up (udc_device->device_state, STATE_DEFAULT); -+ } else { -+ UDCDBG ("device leaving default state"); -+ udc_state_transition_down (udc_device->device_state, STATE_POWERED); -+ } -+ } -+ if (bits & UDC_SUS) { -+ if (devstat & UDC_SUS) { -+ UDCDBG ("entering suspended state"); -+ usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0); -+ } else { -+ UDCDBG ("leaving suspended state"); -+ usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0); -+ } -+ } -+ if (bits & UDC_R_WK_OK) { -+ UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK) -+ ? "enabled" : "disabled"); -+ } -+ if (bits & UDC_ADD) { -+ if (devstat & UDC_ADD) { -+ UDCDBG ("default -> addressed"); -+ udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED); -+ } else { -+ UDCDBG ("addressed -> default"); -+ udc_state_transition_down (udc_device->device_state, STATE_DEFAULT); -+ } -+ } -+ if (bits & UDC_CFG) { -+ if (devstat & UDC_CFG) { -+ UDCDBG ("device configured"); -+ /* The ep0_recv_setup function generates the -+ * DEVICE_CONFIGURED event when a -+ * USB_REQ_SET_CONFIGURATION setup packet is -+ * received, so we should already be in the -+ * state STATE_CONFIGURED. -+ */ -+ udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED); -+ } else { -+ UDCDBG ("device deconfigured"); -+ udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED); -+ } -+ } -+ } -+ -+ /* Clear interrupt source */ -+ outw (UDC_DS_Chg, UDC_IRQ_SRC); -+ -+ /* Save current DEVSTAT */ -+ udc_devstat = devstat; -+} -+ -+static void s3c2410_udc_ep0(void) -+{ -+ u_int8_t ep0csr; -+ -+ UDCDBG("-> Entering EP0 handler"); -+ -+ S3C2410_UDC_SETIX(EP0); -+ ep0csr = inb(S3C2410_UDC_IN_CSR1_REG); -+ -+ /* clear stall status */ -+ if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { -+ clear_sp0_sst; -+ /* FIXME */ -+ ep0_idle(); -+ } -+ -+ if (ep0csr & S3C2410_UDC_EP0_CSR_SE -+ && dev->ep0state != EP0_IDLE) { -+ clear_ep0_se; -+ ep0_idle(); -+ } -+ -+ switch (dev->ep0state) { -+ case EP0_IDLE: -+ if (ep0crs & S3C2410_UDC_EP0_CSR_OPKRDY) { -+ } -+ break; -+ case EP0_IN_DATA_PHASE: -+ break; -+ case EP0_OUT_DATA_PHASE: -+ break; -+ case EP0_END_XFER: -+ break; -+ case EP0_STALL: -+ set_ep0_ss; -+ break; -+ } -+} -+ -+ -+} -+ -+/* Handle SETUP USB interrupt. -+ * This function implements TRM Figure 14-14. -+ */ -+static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint) -+{ -+ UDCDBG ("-> Entering device setup"); -+ -+ do { -+ const int setup_pktsize = 8; -+ unsigned char *datap = -+ (unsigned char *) &ep0_urb->device_request; -+ -+ /* Gain access to EP 0 setup FIFO */ -+ outw (UDC_Setup_Sel, UDC_EP_NUM); -+ -+ /* Read control request data */ -+ insb (UDC_DATA, datap, setup_pktsize); -+ -+ UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]", -+ *(datap + 0), *(datap + 1), *(datap + 2), -+ *(datap + 3), *(datap + 4), *(datap + 5), -+ *(datap + 6), *(datap + 7)); -+ -+ /* Reset EP0 setup FIFO */ -+ outw (0, UDC_EP_NUM); -+ } while (inw (UDC_IRQ_SRC) & UDC_Setup); -+ -+ /* Try to process setup packet */ -+ if (ep0_recv_setup (ep0_urb)) { -+ /* Not a setup packet, stall next EP0 transaction */ -+ udc_stall_ep (0); -+ UDCDBG ("can't parse setup packet, still waiting for setup"); -+ return; -+ } -+ -+ /* Check direction */ -+ if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) -+ == USB_REQ_HOST2DEVICE) { -+ UDCDBG ("control write on EP0"); -+ if (le16_to_cpu (ep0_urb->device_request.wLength)) { -+ /* We don't support control write data stages. -+ * The only standard control write request with a data -+ * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't -+ * support that so we just stall those requests. A -+ * function driver might support a non-standard -+ * write request with a data stage, but it isn't -+ * obvious what we would do with the data if we read it -+ * so we'll just stall it. It seems like the API isn't -+ * quite right here. -+ */ -+#if 0 -+ /* Here is what we would do if we did support control -+ * write data stages. -+ */ -+ ep0_urb->actual_length = 0; -+ outw (0, UDC_EP_NUM); -+ /* enable the EP0 rx FIFO */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+#else -+ /* Stall this request */ -+ UDCDBG ("Stalling unsupported EP0 control write data " -+ "stage."); -+ udc_stall_ep (0); -+#endif -+ } else { -+ omap1510_prepare_for_control_write_status (ep0_urb); -+ } -+ } else { -+ UDCDBG ("control read on EP0"); -+ /* The ep0_recv_setup function has already placed our response -+ * packet data in ep0_urb->buffer and the packet length in -+ * ep0_urb->actual_length. -+ */ -+ endpoint->tx_urb = ep0_urb; -+ endpoint->sent = 0; -+ /* select the EP0 tx FIFO */ -+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); -+ /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo -+ * will update endpoint->last with the number of bytes written -+ * to the FIFO. -+ */ -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable the FIFO to start the packet transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect the EP0 tx FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } -+ -+ UDCDBG ("<- Leaving device setup"); -+} -+ -+/* Handle endpoint 0 RX interrupt -+ * This routine implements TRM Figure 14-16. -+ */ -+static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint) -+{ -+ unsigned short status; -+ -+ UDCDBG ("RX on EP0"); -+ /* select EP0 rx FIFO */ -+ outw (UDC_EP_Sel, UDC_EP_NUM); -+ -+ status = inw (UDC_STAT_FLG); -+ -+ if (status & UDC_ACK) { -+ /* Check direction */ -+ if ((ep0_urb->device_request.bmRequestType -+ & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) { -+ /* This rx interrupt must be for a control write data -+ * stage packet. -+ * -+ * We don't support control write data stages. -+ * We should never end up here. -+ */ -+ -+ /* clear the EP0 rx FIFO */ -+ outw (UDC_Clr_EP, UDC_CTRL); -+ -+ /* deselect the EP0 rx FIFO */ -+ outw (0, UDC_EP_NUM); -+ -+ UDCDBG ("Stalling unexpected EP0 control write " -+ "data stage packet"); -+ udc_stall_ep (0); -+ } else { -+ /* This rx interrupt must be for a control read status -+ * stage packet. -+ */ -+ UDCDBG ("ACK on EP0 control read status stage packet"); -+ /* deselect EP0 rx FIFO */ -+ outw (0, UDC_EP_NUM); -+ } -+ } else if (status & UDC_STALL) { -+ UDCDBG ("EP0 stall during RX"); -+ /* deselect EP0 rx FIFO */ -+ outw (0, UDC_EP_NUM); -+ } else { -+ /* deselect EP0 rx FIFO */ -+ outw (0, UDC_EP_NUM); -+ } -+} -+ -+/* Handle endpoint 0 TX interrupt -+ * This routine implements TRM Figure 14-18. -+ */ -+static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint) -+{ -+ unsigned short status; -+ struct usb_device_request *request = &ep0_urb->device_request; -+ -+ UDCDBG ("TX on EP0"); -+ /* select EP0 TX FIFO */ -+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); -+ -+ status = inw (UDC_STAT_FLG); -+ if (status & UDC_ACK) { -+ /* Check direction */ -+ if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) == -+ USB_REQ_HOST2DEVICE) { -+ /* This tx interrupt must be for a control write status -+ * stage packet. -+ */ -+ UDCDBG ("ACK on EP0 control write status stage packet"); -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } else { -+ /* This tx interrupt must be for a control read data -+ * stage packet. -+ */ -+ int wLength = le16_to_cpu (request->wLength); -+ -+ /* Update our count of bytes sent so far in this -+ * transfer. -+ */ -+ endpoint->sent += endpoint->last; -+ -+ /* We are finished with this transfer if we have sent -+ * all of the bytes in our tx urb (urb->actual_length) -+ * unless we need a zero-length terminating packet. We -+ * need a zero-length terminating packet if we returned -+ * fewer bytes than were requested (wLength) by the host, -+ * and the number of bytes we returned is an exact -+ * multiple of the packet size endpoint->tx_packetSize. -+ */ -+ if ((endpoint->sent == ep0_urb->actual_length) -+ && ((ep0_urb->actual_length == wLength) -+ || (endpoint->last != -+ endpoint->tx_packetSize))) { -+ /* Done with control read data stage. */ -+ UDCDBG ("control read data stage complete"); -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ /* select EP0 RX FIFO to prepare for control -+ * read status stage. -+ */ -+ outw (UDC_EP_Sel, UDC_EP_NUM); -+ /* clear the EP0 RX FIFO */ -+ outw (UDC_Clr_EP, UDC_CTRL); -+ /* enable the EP0 RX FIFO */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect the EP0 RX FIFO */ -+ outw (0, UDC_EP_NUM); -+ } else { -+ /* We still have another packet of data to send -+ * in this control read data stage or else we -+ * need a zero-length terminating packet. -+ */ -+ UDCDBG ("ACK control read data stage packet"); -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable the EP0 tx FIFO to start transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } -+ } -+ } else if (status & UDC_STALL) { -+ UDCDBG ("EP0 stall during TX"); -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } else { -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } -+} -+ -+/* Handle RX transaction on non-ISO endpoint. -+ * This function implements TRM Figure 14-27. -+ * The ep argument is a physical endpoint number for a non-ISO OUT endpoint -+ * in the range 1 to 15. -+ */ -+static void omap1510_udc_epn_rx (int ep) -+{ -+ unsigned short status; -+ -+ /* Check endpoint status */ -+ status = inw (UDC_STAT_FLG); -+ -+ if (status & UDC_ACK) { -+ int nbytes; -+ struct usb_endpoint_instance *endpoint = -+ omap1510_find_ep (ep); -+ -+ nbytes = omap1510_read_noniso_rx_fifo (endpoint); -+ usbd_rcv_complete (endpoint, nbytes, 0); -+ -+ /* enable rx FIFO to prepare for next packet */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ } else if (status & UDC_STALL) { -+ UDCDBGA ("STALL on RX endpoint %d", ep); -+ } else if (status & UDC_NAK) { -+ UDCDBGA ("NAK on RX ep %d", ep); -+ } else { -+ serial_printf ("omap-bi: RX on ep %d with status %x", ep, -+ status); -+ } -+} -+ -+/* Handle TX transaction on non-ISO endpoint. -+ * This function implements TRM Figure 14-29. -+ * The ep argument is a physical endpoint number for a non-ISO IN endpoint -+ * in the range 16 to 30. -+ */ -+static void omap1510_udc_epn_tx (int ep) -+{ -+ unsigned short status; -+ -+ /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */ -+ -+ /* Check endpoint status */ -+ status = inw (UDC_STAT_FLG); -+ -+ if (status & UDC_ACK) { -+ struct usb_endpoint_instance *endpoint = -+ omap1510_find_ep (ep); -+ -+ /* We need to transmit a terminating zero-length packet now if -+ * we have sent all of the data in this URB and the transfer -+ * size was an exact multiple of the packet size. -+ */ -+ if (endpoint->tx_urb -+ && (endpoint->last == endpoint->tx_packetSize) -+ && (endpoint->tx_urb->actual_length - endpoint->sent - -+ endpoint->last == 0)) { -+ /* Prepare to transmit a zero-length packet. */ -+ endpoint->sent += endpoint->last; -+ /* write 0 bytes of data to FIFO */ -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable tx FIFO to start transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ } else if (endpoint->tx_urb -+ && endpoint->tx_urb->actual_length) { -+ /* retire the data that was just sent */ -+ usbd_tx_complete (endpoint); -+ /* Check to see if we have more data ready to transmit -+ * now. -+ */ -+ if (endpoint->tx_urb -+ && endpoint->tx_urb->actual_length) { -+ /* write data to FIFO */ -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable tx FIFO to start transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ } -+ } -+ } else if (status & UDC_STALL) { -+ UDCDBGA ("STALL on TX endpoint %d", ep); -+ } else if (status & UDC_NAK) { -+ UDCDBGA ("NAK on TX endpoint %d", ep); -+ } else { -+ /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */ -+ } -+} -+ -+ -+/* -+------------------------------------------------------------------------------- -+*/ -+ -+/* Handle general USB interrupts and dispatch according to type. -+ * This function implements TRM Figure 14-13. -+ */ -+void s3c2410_udc_irq (void) -+{ -+ u_int8_t save_idx = inb(S3C2410_UDC_INDEX_REG); -+ u_int8_t usb_status = inb(S3C2410_UDC_USB_INT_REG); -+ u_int8_t usbd_status = inb(S3C2410_UDC_EP_INT_REG); -+ -+ UDCDBGA("< IRQ usbs=0x%02x, usbds=0x%02x start >", usb_status, -+ usbd_status); -+ -+ if (usb_status & S3C2410_UDC_USBINT_RESET) { -+ valid_irq++; -+ } -+ -+ if (usb_status & S3C2410_UDC_USBINT_RESUME) { -+ valid_irq++; -+ -+ } -+ -+ if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { -+ valid_irq++; -+ -+ } -+ -+ /* Endpoint Interrupts */ -+ if (usbd_status) { -+ int i; -+ -+ if (usbd_status & S3C2410_UDC_INT_EP0) { -+ s3c2410_udc_ep0(); -+ outb(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); -+ valid_irq++; -+ } -+ -+ for (i = 1; i < 5; i++) { -+ u_int32_t tmp = 1 << i; -+ -+ if (usbd_status & tmp) { -+ /* FIXME: Handle EP X */ -+ s3c2410_udc_epn(i); -+ outb(tmp, S3C2410_UDC_EP_INT_REG); -+ valid_irq++; -+ } -+ } -+ } -+ outb(save_idx, S3C2410_UDC_INDEX_REG); -+ -+#if 0 -+ if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */ -+ return; -+ -+ UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src); -+ /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */ -+ -+ if (irq_src & UDC_DS_Chg) { -+ /* Device status changed */ -+ omap1510_udc_state_changed (); -+ valid_irq++; -+ } -+ if (irq_src & UDC_EP0_RX) { -+ /* Endpoint 0 receive */ -+ outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */ -+ omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0); -+ valid_irq++; -+ } -+ if (irq_src & UDC_EP0_TX) { -+ /* Endpoint 0 transmit */ -+ outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */ -+ omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0); -+ valid_irq++; -+ } -+ if (irq_src & UDC_Setup) { -+ /* Device setup */ -+ omap1510_udc_setup (udc_device->bus->endpoint_array + 0); -+ valid_irq++; -+ } -+ /*if (!valid_irq) */ -+ /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */ -+#endif -+ UDCDBGA ("< IRQ end >", udc_interrupts); -+ -+ udc_interrupts++; -+} -+ -+/* This function implements TRM Figure 14-26. */ -+void omap1510_udc_noniso_irq (void) -+{ -+ unsigned short epnum; -+ unsigned short irq_src = inw (UDC_IRQ_SRC); -+ int valid_irq = 0; -+ -+ if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX))) -+ return; -+ -+ UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC)); -+ -+ if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */ -+ /* Determine the endpoint number for this interrupt */ -+ epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8; -+ UDCDBGA ("RX on ep %x", epnum); -+ -+ /* acknowledge interrupt */ -+ outw (UDC_EPn_RX, UDC_IRQ_SRC); -+ -+ if (epnum) { -+ /* select the endpoint FIFO */ -+ outw (UDC_EP_Sel | epnum, UDC_EP_NUM); -+ -+ omap1510_udc_epn_rx (epnum); -+ -+ /* deselect the endpoint FIFO */ -+ outw (epnum, UDC_EP_NUM); -+ } -+ valid_irq++; -+ } -+ if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */ -+ /* Determine the endpoint number for this interrupt */ -+ epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN; -+ UDCDBGA ("TX on ep %x", epnum); -+ -+ /* acknowledge interrupt */ -+ outw (UDC_EPn_TX, UDC_IRQ_SRC); -+ -+ if (epnum) { -+ /* select the endpoint FIFO */ -+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); -+ -+ omap1510_udc_epn_tx (epnum); -+ -+ /* deselect the endpoint FIFO */ -+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM); -+ } -+ valid_irq++; -+ } -+ if (!valid_irq) -+ serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n", -+ irq_src); -+} -+ -+/* -+------------------------------------------------------------------------------- -+*/ -+ -+ -+/* -+ * Start of public functions. -+ */ -+ -+/* Called to start packet transmission. */ -+void udc_endpoint_write (struct usb_endpoint_instance *endpoint) -+{ -+ unsigned short epnum = -+ endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; -+ -+ UDCDBGA ("Starting transmit on ep %x", epnum); -+ -+ if (endpoint->tx_urb) { -+ /* select the endpoint FIFO */ -+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); -+ /* write data to FIFO */ -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable tx FIFO to start transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect the endpoint FIFO */ -+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM); -+ } -+} -+ -+/* Start to initialize h/w stuff */ -+int udc_init (void) -+{ -+ u16 udc_rev; -+ uchar value; -+ ulong gpio; -+ int i; -+ -+ /* Let the device settle down before we start */ -+ for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000); -+ -+ udc_device = NULL; -+ -+ UDCDBG ("starting"); -+ -+ /* Check peripheral reset. Must be 1 to make sure -+ MPU TIPB peripheral reset is inactive */ -+ UDCREG (ARM_RSTCT2); -+ -+ /* Set and check clock control. -+ * We might ought to be using the clock control API to do -+ * this instead of fiddling with the clock registers directly -+ * here. -+ */ -+ outw ((1 << 4) | (1 << 5), CLOCK_CTRL); -+ UDCREG (CLOCK_CTRL); -+ /* Set and check APLL */ -+ outw (0x0008, APLL_CTRL); -+ UDCREG (APLL_CTRL); -+ /* Set and check DPLL */ -+ outw (0x2210, DPLL_CTRL); -+ UDCREG (DPLL_CTRL); -+ /* Set and check SOFT */ -+ outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ); -+ /* Short delay to wait for DPLL */ -+ udelay (1000); -+ -+ /* Print banner with device revision */ -+ udc_rev = inw (UDC_REV) & 0xff; -+ printf ("USB: TI OMAP1510 USB function module rev %d.%d\n", -+ udc_rev >> 4, udc_rev & 0xf); -+ -+#ifdef CONFIG_OMAP_SX1 -+ i2c_read (0x32, 0x04, 1, &value, 1); -+ value |= 0x04; -+ i2c_write (0x32, 0x04, 1, &value, 1); -+ -+ i2c_read (0x32, 0x03, 1, &value, 1); -+ value |= 0x01; -+ i2c_write (0x32, 0x03, 1, &value, 1); -+ -+ gpio = inl(GPIO_PIN_CONTROL_REG); -+ gpio |= 0x0002; /* A_IRDA_OFF */ -+ gpio |= 0x0800; /* A_SWITCH */ -+ gpio |= 0x8000; /* A_USB_ON */ -+ outl (gpio, GPIO_PIN_CONTROL_REG); -+ -+ gpio = inl(GPIO_DIR_CONTROL_REG); -+ gpio &= ~0x0002; /* A_IRDA_OFF */ -+ gpio &= ~0x0800; /* A_SWITCH */ -+ gpio &= ~0x8000; /* A_USB_ON */ -+ outl (gpio, GPIO_DIR_CONTROL_REG); -+ -+ gpio = inl(GPIO_DATA_OUTPUT_REG); -+ gpio |= 0x0002; /* A_IRDA_OFF */ -+ gpio &= ~0x0800; /* A_SWITCH */ -+ gpio &= ~0x8000; /* A_USB_ON */ -+ outl (gpio, GPIO_DATA_OUTPUT_REG); -+#endif -+ -+ /* The VBUS_MODE bit selects whether VBUS detection is done via -+ * software (1) or hardware (0). When software detection is -+ * selected, VBUS_CTRL selects whether USB is not connected (0) -+ * or connected (1). -+ */ -+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); -+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); -+ UDCREGL (FUNC_MUX_CTRL_0); -+ -+ /* -+ * At this point, device is ready for configuration... -+ */ -+ -+ UDCDBG ("disable USB interrupts"); -+ outw (0, UDC_IRQ_EN); -+ UDCREG (UDC_IRQ_EN); -+ -+ UDCDBG ("disable USB DMA"); -+ outw (0, UDC_DMA_IRQ_EN); -+ UDCREG (UDC_DMA_IRQ_EN); -+ -+ UDCDBG ("initialize SYSCON1"); -+ outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1); -+ UDCREG (UDC_SYSCON1); -+ -+ return 0; -+} -+ -+/* Stall endpoint */ -+static void udc_stall_ep (unsigned int ep_addr) -+{ -+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ -+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; -+ -+ UDCDBGA ("stall ep_addr %d", ep_addr); -+ -+ /* REVISIT? -+ * The OMAP TRM section 14.2.4.2 says we must check that the FIFO -+ * is empty before halting the endpoint. The current implementation -+ * doesn't check that the FIFO is empty. -+ */ -+ -+ if (!ep_num) { -+ outw (UDC_Stall_Cmd, UDC_SYSCON2); -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { -+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { -+ /* we have a valid rx endpoint, so halt it */ -+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); -+ outw (UDC_Set_Halt, UDC_CTRL); -+ outw (ep_num, UDC_EP_NUM); -+ } -+ } else { -+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { -+ /* we have a valid tx endpoint, so halt it */ -+ outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM); -+ outw (UDC_Set_Halt, UDC_CTRL); -+ outw (ep_num, UDC_EP_NUM); -+ } -+ } -+} -+ -+/* Reset endpoint */ -+#if 0 -+static void udc_reset_ep (unsigned int ep_addr) -+{ -+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ -+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; -+ -+ UDCDBGA ("reset ep_addr %d", ep_addr); -+ -+ if (!ep_num) { -+ /* control endpoint 0 can't be reset */ -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { -+ UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num, -+ inw (UDC_EP_RX (ep_num))); -+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { -+ /* we have a valid rx endpoint, so reset it */ -+ outw (ep_num | UDC_EP_Sel, UDC_EP_NUM); -+ outw (UDC_Reset_EP, UDC_CTRL); -+ outw (ep_num, UDC_EP_NUM); -+ UDCDBGA ("OUT endpoint %d reset", ep_num); -+ } -+ } else { -+ UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num, -+ inw (UDC_EP_TX (ep_num))); -+ /* Resetting of tx endpoints seems to be causing the USB function -+ * module to fail, which causes problems when the driver is -+ * uninstalled. We'll skip resetting tx endpoints for now until -+ * we figure out what the problem is. -+ */ -+#if 0 -+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { -+ /* we have a valid tx endpoint, so reset it */ -+ outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); -+ outw (UDC_Reset_EP, UDC_CTRL); -+ outw (ep_num | UDC_EP_Dir, UDC_EP_NUM); -+ UDCDBGA ("IN endpoint %d reset", ep_num); -+ } -+#endif -+ } -+} -+#endif -+ -+/* ************************************************************************** */ -+ -+/** -+ * udc_check_ep - check logical endpoint -+ * -+ * Return physical endpoint number to use for this logical endpoint or zero if not valid. -+ */ -+#if 0 -+int udc_check_ep (int logical_endpoint, int packetsize) -+{ -+ if ((logical_endpoint == 0x80) || -+ ((logical_endpoint & 0x8f) != logical_endpoint)) { -+ return 0; -+ } -+ -+ switch (packetsize) { -+ case 8: -+ case 16: -+ case 32: -+ case 64: -+ case 128: -+ case 256: -+ case 512: -+ break; -+ default: -+ return 0; -+ } -+ -+ return EP_ADDR_TO_PHYS_EP (logical_endpoint); -+} -+#endif -+ -+/* -+ * udc_setup_ep - setup endpoint -+ * -+ * Associate a physical endpoint with endpoint_instance -+ */ -+void udc_setup_ep (struct usb_device_instance *device, -+ unsigned int ep, struct usb_endpoint_instance *endpoint) -+{ -+ UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address); -+ -+ /* This routine gets called by bi_modinit for endpoint 0 and from -+ * bi_config for all of the other endpoints. bi_config gets called -+ * during the DEVICE_CREATE, DEVICE_CONFIGURED, and -+ * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet -+ * RAM after bi_config scans the selected device configuration and -+ * initializes the endpoint structures, but before this routine enables -+ * the OUT endpoint FIFOs. Since bi_config calls this routine in a -+ * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our -+ * packet RAM here when ep==1. -+ * I really hate to do this here, but it seems like the API exported -+ * by the USB bus interface controller driver to the usbd-bi module -+ * isn't quite right so there is no good place to do this. -+ */ -+ if (ep == 1) { -+ omap1510_deconfigure_device (); -+ omap1510_configure_device (device); -+ } -+ -+ if (endpoint && (ep < UDC_MAX_ENDPOINTS)) { -+ int ep_addr = endpoint->endpoint_address; -+ -+ if (!ep_addr) { -+ /* nothing to do for endpoint 0 */ -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ /* nothing to do for IN (tx) endpoints */ -+ } else { /* OUT (rx) endpoint */ -+ if (endpoint->rcv_packetSize) { -+ /*struct urb* urb = &(urb_out_array[ep&0xFF]); */ -+ /*urb->endpoint = endpoint; */ -+ /*urb->device = device; */ -+ /*urb->buffer_length = sizeof(urb->buffer); */ -+ -+ /*endpoint->rcv_urb = urb; */ -+ omap1510_prepare_endpoint_for_rx (ep_addr); -+ } -+ } -+ } -+} -+ -+/** -+ * udc_disable_ep - disable endpoint -+ * @ep: -+ * -+ * Disable specified endpoint -+ */ -+#if 0 -+void udc_disable_ep (unsigned int ep_addr) -+{ -+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ -+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; -+ struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */ -+ -+ UDCDBGA ("disable ep_addr %d", ep_addr); -+ -+ if (!ep_num) { -+ /* nothing to do for endpoint 0 */ ; -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ if (endpoint->tx_packetSize) { -+ /* we have a valid tx endpoint */ -+ /*usbd_flush_tx(endpoint); */ -+ endpoint->tx_urb = NULL; -+ } -+ } else { -+ if (endpoint->rcv_packetSize) { -+ /* we have a valid rx endpoint */ -+ /*usbd_flush_rcv(endpoint); */ -+ endpoint->rcv_urb = NULL; -+ } -+ } -+} -+#endif -+ -+/* ************************************************************************** */ -+ -+/** -+ * udc_connected - is the USB cable connected -+ * -+ * Return non-zero if cable is connected. -+ */ -+#if 0 -+int udc_connected (void) -+{ -+ return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT); -+} -+#endif -+ -+/* Turn on the USB connection by enabling the pullup resistor */ -+void udc_connect (void) -+{ -+ UDCDBG ("connect, enable Pullup"); -+} -+ -+/* Turn off the USB connection by disabling the pullup resistor */ -+void udc_disconnect (void) -+{ -+ UDCDBG ("disconnect, disable Pullup"); -+} -+ -+/* ************************************************************************** */ -+ -+ -+/* -+ * udc_disable_interrupts - disable interrupts -+ * switch off interrupts -+ */ -+#if 0 -+void udc_disable_interrupts (struct usb_device_instance *device) -+{ -+ UDCDBG ("disabling all interrupts"); -+ outw (0, UDC_IRQ_EN); -+} -+#endif -+ -+/* ************************************************************************** */ -+ -+/** -+ * udc_ep0_packetsize - return ep0 packetsize -+ */ -+#if 0 -+int udc_ep0_packetsize (void) -+{ -+ return EP0_PACKETSIZE; -+} -+#endif -+ -+/* Switch on the UDC */ -+void udc_enable (struct usb_device_instance *device) -+{ -+ UDCDBGA ("enable device %p, status %d", device, device->status); -+ -+ /* initialize driver state variables */ -+ udc_devstat = 0; -+ -+ /* Save the device structure pointer */ -+ udc_device = device; -+ -+ /* Setup ep0 urb */ -+ if (!ep0_urb) { -+ ep0_urb = -+ usbd_alloc_urb (udc_device, -+ udc_device->bus->endpoint_array); -+ } else { -+ serial_printf ("udc_enable: ep0_urb already allocated %p\n", -+ ep0_urb); -+ } -+ -+#ifdef FIXME -+ /* The VBUS_MODE bit selects whether VBUS detection is done via -+ * software (1) or hardware (0). When software detection is -+ * selected, VBUS_CTRL selects whether USB is not connected (0) -+ * or connected (1). -+ */ -+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE, -+ FUNC_MUX_CTRL_0); -+ UDCREGL (FUNC_MUX_CTRL_0); -+#endif -+ -+ s3c2410_configure_device(device); -+} -+ -+/* Switch off the UDC */ -+void udc_disable (void) -+{ -+ UDCDBG ("disable UDC"); -+ -+ s3c2410_deconfigure_device(); -+ -+#ifdef FIXME -+ /* The VBUS_MODE bit selects whether VBUS detection is done via -+ * software (1) or hardware (0). When software detection is -+ * selected, VBUS_CTRL selects whether USB is not connected (0) -+ * or connected (1). -+ */ -+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); -+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); -+ UDCREGL (FUNC_MUX_CTRL_0); -+#endif -+ -+ /* Free ep0 URB */ -+ if (ep0_urb) { -+ /*usbd_dealloc_urb(ep0_urb); */ -+ ep0_urb = NULL; -+ } -+ -+ /* Reset device pointer. -+ * We ought to do this here to balance the initialization of udc_device -+ * in udc_enable, but some of our other exported functions get called -+ * by the bus interface driver after udc_disable, so we have to hang on -+ * to the device pointer to avoid a null pointer dereference. */ -+ /* udc_device = NULL; */ -+} -+ -+/** -+ * udc_startup - allow udc code to do any additional startup -+ */ -+void udc_startup_events (struct usb_device_instance *device) -+{ -+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ -+ usbd_device_event_irq (device, DEVICE_INIT, 0); -+ -+ /* The DEVICE_CREATE event puts the USB device in the state -+ * STATE_ATTACHED. -+ */ -+ usbd_device_event_irq (device, DEVICE_CREATE, 0); -+ -+ /* Some USB controller driver implementations signal -+ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. -+ * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, -+ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. -+ * The OMAP USB client controller has the capability to detect when the -+ * USB cable is connected to a powered USB bus via the ATT bit in the -+ * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and -+ * DEVICE_RESET events until later. -+ */ -+ -+ udc_enable (device); -+} -+ -+#endif -diff --git a/examples/Makefile b/examples/Makefile -index a342d75..082e52e 100644 ---- a/examples/Makefile -+++ b/examples/Makefile -@@ -60,7 +60,7 @@ endif - include $(TOPDIR)/config.mk - - SREC = hello_world.srec --BIN = hello_world.bin hello_world -+BIN = hello_world hello_world.bin - - ifeq ($(CPU),mpc8xx) - SREC = test_burst.srec -@@ -122,7 +122,7 @@ clibdir := $(shell dirname `$(CC) $(CFLA - - CPPFLAGS += -I.. - --all: .depend $(OBJS) $(LIB) $(SREC) $(BIN) -+all: .depend $(OBJS) $(LIB) $(BIN) $(SREC) - - ######################################################################### - $(LIB): .depend $(LIBOBJS) -diff --git a/include/asm-arm/arch-s3c24x0/mmc.h b/include/asm-arm/arch-s3c24x0/mmc.h -new file mode 100644 -index 0000000..d9178f3 ---- /dev/null -+++ b/include/asm-arm/arch-s3c24x0/mmc.h -@@ -0,0 +1,112 @@ -+/* -+ * linux/drivers/mmc/mmc_pxa.h -+ * -+ * Author: Vladimir Shebordaev, Igor Oblakov -+ * Copyright: MontaVista Software Inc. -+ * -+ * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __MMC_PXA_P_H__ -+#define __MMC_PXA_P_H__ -+ -+#include <asm/arch/regs-sdi.h> -+ -+#define MMC_DEFAULT_RCA (1<<16) -+ -+#define MMC_BLOCK_SIZE 512 -+#define MMC_CMD_RESET 0 -+#define MMC_CMD_SEND_OP_COND 1 -+#define MMC_CMD_ALL_SEND_CID 2 -+#define MMC_CMD_SET_RCA 3 -+#define MMC_CMD_SELECT_CARD 7 -+#define MMC_CMD_SEND_CSD 9 -+#define MMC_CMD_SEND_CID 10 -+#define MMC_CMD_SEND_STATUS 13 -+#define MMC_CMD_SET_BLOCKLEN 16 -+#define MMC_CMD_READ_BLOCK 17 -+#define MMC_CMD_RD_BLK_MULTI 18 -+#define MMC_CMD_WRITE_BLOCK 24 -+ -+#define MMC_MAX_BLOCK_SIZE 512 -+ -+#define MMC_R1_IDLE_STATE 0x01 -+#define MMC_R1_ERASE_STATE 0x02 -+#define MMC_R1_ILLEGAL_CMD 0x04 -+#define MMC_R1_COM_CRC_ERR 0x08 -+#define MMC_R1_ERASE_SEQ_ERR 0x01 -+#define MMC_R1_ADDR_ERR 0x02 -+#define MMC_R1_PARAM_ERR 0x04 -+ -+#define MMC_R1B_WP_ERASE_SKIP 0x0002 -+#define MMC_R1B_ERR 0x0004 -+#define MMC_R1B_CC_ERR 0x0008 -+#define MMC_R1B_CARD_ECC_ERR 0x0010 -+#define MMC_R1B_WP_VIOLATION 0x0020 -+#define MMC_R1B_ERASE_PARAM 0x0040 -+#define MMC_R1B_OOR 0x0080 -+#define MMC_R1B_IDLE_STATE 0x0100 -+#define MMC_R1B_ERASE_RESET 0x0200 -+#define MMC_R1B_ILLEGAL_CMD 0x0400 -+#define MMC_R1B_COM_CRC_ERR 0x0800 -+#define MMC_R1B_ERASE_SEQ_ERR 0x1000 -+#define MMC_R1B_ADDR_ERR 0x2000 -+#define MMC_R1B_PARAM_ERR 0x4000 -+ -+typedef struct mmc_cid -+{ -+/* FIXME: BYTE_ORDER */ -+ uchar year:4, -+ month:4; -+ uchar sn[3]; -+ uchar fwrev:4, -+ hwrev:4; -+ uchar name[6]; -+ uchar id[3]; -+} mmc_cid_t; -+ -+typedef struct mmc_csd -+{ -+ uchar ecc:2, -+ file_format:2, -+ tmp_write_protect:1, -+ perm_write_protect:1, -+ copy:1, -+ file_format_grp:1; -+ uint64_t content_prot_app:1, -+ rsvd3:4, -+ write_bl_partial:1, -+ write_bl_len:4, -+ r2w_factor:3, -+ default_ecc:2, -+ wp_grp_enable:1, -+ wp_grp_size:5, -+ erase_grp_mult:5, -+ erase_grp_size:5, -+ c_size_mult1:3, -+ vdd_w_curr_max:3, -+ vdd_w_curr_min:3, -+ vdd_r_curr_max:3, -+ vdd_r_curr_min:3, -+ c_size:12, -+ rsvd2:2, -+ dsr_imp:1, -+ read_blk_misalign:1, -+ write_blk_misalign:1, -+ read_bl_partial:1; -+ -+ ushort read_bl_len:4, -+ ccc:12; -+ uchar tran_speed; -+ uchar nsac; -+ uchar taac; -+ uchar rsvd1:2, -+ spec_vers:4, -+ csd_structure:2; -+} mmc_csd_t; -+ -+ -+#endif /* __MMC_PXA_P_H__ */ -diff --git a/include/asm-arm/arch-s3c24x0/regs-sdi.h b/include/asm-arm/arch-s3c24x0/regs-sdi.h -new file mode 100644 -index 0000000..9b5b9d1 ---- /dev/null -+++ b/include/asm-arm/arch-s3c24x0/regs-sdi.h -@@ -0,0 +1,110 @@ -+/* linux/include/asm/arch-s3c2410/regs-sdi.h -+ * -+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> -+ * http://www.simtec.co.uk/products/SWLINUX/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * S3C2410 MMC/SDIO register definitions -+ * -+ * Changelog: -+ * 18-Aug-2004 Ben Dooks Created initial file -+ * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates -+ * 29-Nov-2004 Ben Dooks Updated Koen's patch -+*/ -+ -+#ifndef __ASM_ARM_REGS_SDI -+#define __ASM_ARM_REGS_SDI "regs-sdi.h" -+ -+#define S3C2440_SDICON_SDRESET (1<<8) -+#define S3C2440_SDICON_MMCCLOCK (1<<5) -+#define S3C2410_SDICON_BYTEORDER (1<<4) -+#define S3C2410_SDICON_SDIOIRQ (1<<3) -+#define S3C2410_SDICON_RWAITEN (1<<2) -+#define S3C2410_SDICON_FIFORESET (1<<1) -+#define S3C2410_SDICON_CLOCKTYPE (1<<0) -+ -+#define S3C2410_SDICMDCON_ABORT (1<<12) -+#define S3C2410_SDICMDCON_WITHDATA (1<<11) -+#define S3C2410_SDICMDCON_LONGRSP (1<<10) -+#define S3C2410_SDICMDCON_WAITRSP (1<<9) -+#define S3C2410_SDICMDCON_CMDSTART (1<<8) -+#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -+#define S3C2410_SDICMDCON_INDEX (0x3f) -+ -+#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -+#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -+#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -+#define S3C2410_SDICMDSTAT_XFERING (1<<8) -+#define S3C2410_SDICMDSTAT_INDEX (0xff) -+ -+#define S3C2440_SDIDCON_DS_BYTE (0<<22) -+#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -+#define S3C2440_SDIDCON_DS_WORD (2<<22) -+#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -+#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -+#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -+#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -+#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -+#define S3C2410_SDIDCON_WIDEBUS (1<<16) -+#define S3C2410_SDIDCON_DMAEN (1<<15) -+#define S3C2410_SDIDCON_STOP (1<<14) -+#define S3C2440_SDIDCON_DATSTART (1<<14) -+#define S3C2410_SDIDCON_DATMODE (3<<12) -+#define S3C2410_SDIDCON_BLKNUM (0x7ff) -+ -+/* constants for S3C2410_SDIDCON_DATMODE */ -+#define S3C2410_SDIDCON_XFER_READY (0<<12) -+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -+#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -+#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) -+ -+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -+#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) -+ -+#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -+#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -+#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -+#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -+#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -+#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -+#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -+#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -+#define S3C2410_SDIDSTA_TXDATAON (1<<1) -+#define S3C2410_SDIDSTA_RXDATAON (1<<0) -+ -+#define S3C2440_SDIFSTA_FIFORESET (1<<16) -+#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -+#define S3C2410_SDIFSTA_TFDET (1<<13) -+#define S3C2410_SDIFSTA_RFDET (1<<12) -+#define S3C2410_SDIFSTA_TFHALF (1<<11) -+#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -+#define S3C2410_SDIFSTA_RFLAST (1<<9) -+#define S3C2410_SDIFSTA_RFFULL (1<<8) -+#define S3C2410_SDIFSTA_RFHALF (1<<7) -+#define S3C2410_SDIFSTA_COUNTMASK (0x7f) -+ -+#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -+#define S3C2410_SDIIMSK_CMDSENT (1<<16) -+#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -+#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -+#define S3C2410_SDIIMSK_READWAIT (1<<13) -+#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -+#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -+#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -+#define S3C2410_SDIIMSK_DATACRC (1<<9) -+#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -+#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -+#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -+#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -+#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -+#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -+#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -+#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -+#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) -+ -+#endif /* __ASM_ARM_REGS_SDI */ -diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h -index 7d7888e..4e9c6d9 100644 ---- a/include/asm-arm/mach-types.h -+++ b/include/asm-arm/mach-types.h -@@ -424,7 +424,7 @@ #define MACH_TYPE_MT02 4 - #define MACH_TYPE_MPORT3S 411 - #define MACH_TYPE_RA_ALPHA 412 - #define MACH_TYPE_XCEP 413 --#define MACH_TYPE_ARCOM_MERCURY 414 -+#define MACH_TYPE_ARCOM_VULCAN 414 - #define MACH_TYPE_STARGATE 415 - #define MACH_TYPE_ARMADILLOJ 416 - #define MACH_TYPE_ELROY_JACK 417 -@@ -457,7 +457,7 @@ #define MACH_TYPE_ESL_SARVA 4 - #define MACH_TYPE_XM250 444 - #define MACH_TYPE_T6TC1XB 445 - #define MACH_TYPE_ESS710 446 --#define MACH_TYPE_MX3ADS 447 -+#define MACH_TYPE_MX31ADS 447 - #define MACH_TYPE_HIMALAYA 448 - #define MACH_TYPE_BOLFENK 449 - #define MACH_TYPE_AT91RM9200KR 450 -@@ -736,7 +736,308 @@ #define MACH_TYPE_ADSPORTAL 7 - #define MACH_TYPE_LN2410SBC 725 - #define MACH_TYPE_CB3RUFC 726 - #define MACH_TYPE_MP2USB 727 --#define MACH_TYPE_PDNB3 1002 -+#define MACH_TYPE_NTNP425C 728 -+#define MACH_TYPE_COLIBRI 729 -+#define MACH_TYPE_PCM7220 730 -+#define MACH_TYPE_GATEWAY7001 731 -+#define MACH_TYPE_PCM027 732 -+#define MACH_TYPE_CMPXA 733 -+#define MACH_TYPE_ANUBIS 734 -+#define MACH_TYPE_ITE8152 735 -+#define MACH_TYPE_LPC3XXX 736 -+#define MACH_TYPE_PUPPETEER 737 -+#define MACH_TYPE_MACH_VADATECH 738 -+#define MACH_TYPE_E570 739 -+#define MACH_TYPE_X50 740 -+#define MACH_TYPE_RECON 741 -+#define MACH_TYPE_XBOARDGP8 742 -+#define MACH_TYPE_FPIC2 743 -+#define MACH_TYPE_AKITA 744 -+#define MACH_TYPE_A81 745 -+#define MACH_TYPE_SVM_SC25X 746 -+#define MACH_TYPE_VADATECH020 747 -+#define MACH_TYPE_TLI 748 -+#define MACH_TYPE_EDB9315LC 749 -+#define MACH_TYPE_PASSEC 750 -+#define MACH_TYPE_DS_TIGER 751 -+#define MACH_TYPE_E310 752 -+#define MACH_TYPE_E330 753 -+#define MACH_TYPE_RT3000 754 -+#define MACH_TYPE_NOKIA770 755 -+#define MACH_TYPE_PNX0106 756 -+#define MACH_TYPE_HX21XX 757 -+#define MACH_TYPE_FARADAY 758 -+#define MACH_TYPE_SBC9312 759 -+#define MACH_TYPE_BATMAN 760 -+#define MACH_TYPE_JPD201 761 -+#define MACH_TYPE_MIPSA 762 -+#define MACH_TYPE_KACOM 763 -+#define MACH_TYPE_SWARCOCPU 764 -+#define MACH_TYPE_SWARCODSL 765 -+#define MACH_TYPE_BLUEANGEL 766 -+#define MACH_TYPE_HAIRYGRAMA 767 -+#define MACH_TYPE_BANFF 768 -+#define MACH_TYPE_CARMEVA 769 -+#define MACH_TYPE_SAM255 770 -+#define MACH_TYPE_PPM10 771 -+#define MACH_TYPE_EDB9315A 772 -+#define MACH_TYPE_SUNSET 773 -+#define MACH_TYPE_STARGATE2 774 -+#define MACH_TYPE_INTELMOTE2 775 -+#define MACH_TYPE_TRIZEPS4 776 -+#define MACH_TYPE_MAINSTONE2 777 -+#define MACH_TYPE_EZ_IXP42X 778 -+#define MACH_TYPE_TAPWAVE_ZODIAC 779 -+#define MACH_TYPE_UNIVERSALMETER 780 -+#define MACH_TYPE_HICOARM9 781 -+#define MACH_TYPE_PNX4008 782 -+#define MACH_TYPE_KWS6000 783 -+#define MACH_TYPE_PORTUX920T 784 -+#define MACH_TYPE_EZ_X5 785 -+#define MACH_TYPE_OMAP_RUDOLPH 786 -+#define MACH_TYPE_CPUAT91 787 -+#define MACH_TYPE_REA9200 788 -+#define MACH_TYPE_ACTS_PUNE_SA1110 789 -+#define MACH_TYPE_IXP425 790 -+#define MACH_TYPE_ARGONPLUSODYSSEY 791 -+#define MACH_TYPE_PERCH 792 -+#define MACH_TYPE_EIS05R1 793 -+#define MACH_TYPE_PEPPERPAD 794 -+#define MACH_TYPE_SB3010 795 -+#define MACH_TYPE_RM9200 796 -+#define MACH_TYPE_DMA03 797 -+#define MACH_TYPE_ROAD_S101 798 -+#define MACH_TYPE_IQ_NEXTGEN_A 799 -+#define MACH_TYPE_IQ_NEXTGEN_B 800 -+#define MACH_TYPE_IQ_NEXTGEN_C 801 -+#define MACH_TYPE_IQ_NEXTGEN_D 802 -+#define MACH_TYPE_IQ_NEXTGEN_E 803 -+#define MACH_TYPE_MALLOW_AT91 804 -+#define MACH_TYPE_CYBERTRACKER_I 805 -+#define MACH_TYPE_GESBC931X 806 -+#define MACH_TYPE_CENTIPAD 807 -+#define MACH_TYPE_ARMSOC 808 -+#define MACH_TYPE_SE4200 809 -+#define MACH_TYPE_EMS197A 810 -+#define MACH_TYPE_MICRO9 811 -+#define MACH_TYPE_MICRO9L 812 -+#define MACH_TYPE_UC5471DSP 813 -+#define MACH_TYPE_SJ5471ENG 814 -+#define MACH_TYPE_CMPXA26X 815 -+#define MACH_TYPE_NC 816 -+#define MACH_TYPE_OMAP_PALMTE 817 -+#define MACH_TYPE_AJAX52X 818 -+#define MACH_TYPE_SIRIUSTAR 819 -+#define MACH_TYPE_IODATA_HDLG 820 -+#define MACH_TYPE_AT91RM9200UTL 821 -+#define MACH_TYPE_BIOSAFE 822 -+#define MACH_TYPE_MP1000 823 -+#define MACH_TYPE_PARSY 824 -+#define MACH_TYPE_CCXP 825 -+#define MACH_TYPE_OMAP_GSAMPLE 826 -+#define MACH_TYPE_REALVIEW_EB 827 -+#define MACH_TYPE_SAMOA 828 -+#define MACH_TYPE_T3XSCALE 829 -+#define MACH_TYPE_I878 830 -+#define MACH_TYPE_BORZOI 831 -+#define MACH_TYPE_GECKO 832 -+#define MACH_TYPE_DS101 833 -+#define MACH_TYPE_OMAP_PALMTT2 834 -+#define MACH_TYPE_XSCALE_PALMLD 835 -+#define MACH_TYPE_CC9C 836 -+#define MACH_TYPE_SBC1670 837 -+#define MACH_TYPE_IXDP28X5 838 -+#define MACH_TYPE_OMAP_PALMTT 839 -+#define MACH_TYPE_ML696K 840 -+#define MACH_TYPE_ARCOM_ZEUS 841 -+#define MACH_TYPE_OSIRIS 842 -+#define MACH_TYPE_MAESTRO 843 -+#define MACH_TYPE_TUNGE2 844 -+#define MACH_TYPE_IXBBM 845 -+#define MACH_TYPE_MX27 846 -+#define MACH_TYPE_AX8004 847 -+#define MACH_TYPE_AT91SAM9261EK 848 -+#define MACH_TYPE_LOFT 849 -+#define MACH_TYPE_MAGPIE 850 -+#define MACH_TYPE_MX21 851 -+#define MACH_TYPE_MB87M3400 852 -+#define MACH_TYPE_MGUARD_DELTA 853 -+#define MACH_TYPE_DAVINCI_DVDP 854 -+#define MACH_TYPE_HTCUNIVERSAL 855 -+#define MACH_TYPE_TPAD 856 -+#define MACH_TYPE_ROVERP3 857 -+#define MACH_TYPE_JORNADA928 858 -+#define MACH_TYPE_MV88FXX81 859 -+#define MACH_TYPE_STMP36XX 860 -+#define MACH_TYPE_SXNI79524 861 -+#define MACH_TYPE_AMS_DELTA 862 -+#define MACH_TYPE_URANIUM 863 -+#define MACH_TYPE_UCON 864 -+#define MACH_TYPE_NAS100D 865 -+#define MACH_TYPE_L083_1000 866 -+#define MACH_TYPE_EZX 867 -+#define MACH_TYPE_PNX5220 868 -+#define MACH_TYPE_BUTTE 869 -+#define MACH_TYPE_SRM2 870 -+#define MACH_TYPE_DSBR 871 -+#define MACH_TYPE_CRYSTALBALL 872 -+#define MACH_TYPE_TINYPXA27X 873 -+#define MACH_TYPE_HERBIE 874 -+#define MACH_TYPE_MAGICIAN 875 -+#define MACH_TYPE_CM4002 876 -+#define MACH_TYPE_B4 877 -+#define MACH_TYPE_MAUI 878 -+#define MACH_TYPE_CYBERTRACKER_G 879 -+#define MACH_TYPE_NXDKN 880 -+#define MACH_TYPE_MIO8390 881 -+#define MACH_TYPE_OMI_BOARD 882 -+#define MACH_TYPE_MX21CIV 883 -+#define MACH_TYPE_MAHI_CDAC 884 -+#define MACH_TYPE_XSCALE_PALMTX 885 -+#define MACH_TYPE_S3C2413 887 -+#define MACH_TYPE_SAMSYS_EP0 888 -+#define MACH_TYPE_WG302V1 889 -+#define MACH_TYPE_WG302V2 890 -+#define MACH_TYPE_EB42X 891 -+#define MACH_TYPE_IQ331ES 892 -+#define MACH_TYPE_COSYDSP 893 -+#define MACH_TYPE_UPLAT7D 894 -+#define MACH_TYPE_PTDAVINCI 895 -+#define MACH_TYPE_MBUS 896 -+#define MACH_TYPE_NADIA2VB 897 -+#define MACH_TYPE_R1000 898 -+#define MACH_TYPE_HW90250 899 -+#define MACH_TYPE_OMAP_2430SDP 900 -+#define MACH_TYPE_DAVINCI_EVM 901 -+#define MACH_TYPE_OMAP_TORNADO 902 -+#define MACH_TYPE_OLOCREEK 903 -+#define MACH_TYPE_PALMZ72 904 -+#define MACH_TYPE_NXDB500 905 -+#define MACH_TYPE_APF9328 906 -+#define MACH_TYPE_OMAP_WIPOQ 907 -+#define MACH_TYPE_OMAP_TWIP 908 -+#define MACH_TYPE_XSCALE_PALMTREO650 909 -+#define MACH_TYPE_ACUMEN 910 -+#define MACH_TYPE_XP100 911 -+#define MACH_TYPE_FS2410 912 -+#define MACH_TYPE_PXA270_CERF 913 -+#define MACH_TYPE_SQ2FTLPALM 914 -+#define MACH_TYPE_BSEMSERVER 915 -+#define MACH_TYPE_NETCLIENT 916 -+#define MACH_TYPE_XSCALE_PALMTT5 917 -+#define MACH_TYPE_OMAP_PALMTC 918 -+#define MACH_TYPE_OMAP_APOLLON 919 -+#define MACH_TYPE_ARGONLVEVB 920 -+#define MACH_TYPE_REA_2D 921 -+#define MACH_TYPE_TI3E524 922 -+#define MACH_TYPE_ATEB9200 923 -+#define MACH_TYPE_AUCKLAND 924 -+#define MACH_TYPE_AK3320M 925 -+#define MACH_TYPE_DURAMAX 926 -+#define MACH_TYPE_N35 927 -+#define MACH_TYPE_PRONGHORN 928 -+#define MACH_TYPE_FUNDY 929 -+#define MACH_TYPE_LOGICPD_PXA270 930 -+#define MACH_TYPE_CPU777 931 -+#define MACH_TYPE_SIMICON9201 932 -+#define MACH_TYPE_LEAP2_HPM 933 -+#define MACH_TYPE_CM922TXA10 934 -+#define MACH_TYPE_PXA 935 -+#define MACH_TYPE_SANDGATE2 936 -+#define MACH_TYPE_SANDGATE2G 937 -+#define MACH_TYPE_SANDGATE2P 938 -+#define MACH_TYPE_FRED_JACK 939 -+#define MACH_TYPE_TTG_COLOR1 940 -+#define MACH_TYPE_NXEB500HMI 941 -+#define MACH_TYPE_NETDCU8 942 -+#define MACH_TYPE_ML675050_CPU_BOA 943 -+#define MACH_TYPE_NG_FVX538 944 -+#define MACH_TYPE_NG_FVS338 945 -+#define MACH_TYPE_PNX4103 946 -+#define MACH_TYPE_HESDB 947 -+#define MACH_TYPE_XSILO 948 -+#define MACH_TYPE_ESPRESSO 949 -+#define MACH_TYPE_EMLC 950 -+#define MACH_TYPE_SISTERON 951 -+#define MACH_TYPE_RX1950 952 -+#define MACH_TYPE_TSC_VENUS 953 -+#define MACH_TYPE_DS101J 954 -+#define MACH_TYPE_MXC30030ADS 955 -+#define MACH_TYPE_FUJITSU_WIMAXSOC 956 -+#define MACH_TYPE_DUALPCMODEM 957 -+#define MACH_TYPE_GESBC9312 958 -+#define MACH_TYPE_HTCAPACHE 959 -+#define MACH_TYPE_IXDP435 960 -+#define MACH_TYPE_CATPROVT100 961 -+#define MACH_TYPE_PICOTUX1XX 962 -+#define MACH_TYPE_PICOTUX2XX 963 -+#define MACH_TYPE_DSMG600 964 -+#define MACH_TYPE_EMPC2 965 -+#define MACH_TYPE_VENTURA 966 -+#define MACH_TYPE_PHIDGET_SBC 967 -+#define MACH_TYPE_IJ3K 968 -+#define MACH_TYPE_PISGAH 969 -+#define MACH_TYPE_OMAP_FSAMPLE 970 -+#define MACH_TYPE_SG720 971 -+#define MACH_TYPE_REDFOX 972 -+#define MACH_TYPE_MYSH_EP9315_1 973 -+#define MACH_TYPE_TPF106 974 -+#define MACH_TYPE_AT91RM9200KG 975 -+#define MACH_TYPE_SLEDB 976 -+#define MACH_TYPE_ONTRACK 977 -+#define MACH_TYPE_PM1200 978 -+#define MACH_TYPE_ESS24XXX 979 -+#define MACH_TYPE_COREMP7 980 -+#define MACH_TYPE_NEXCODER_6446 981 -+#define MACH_TYPE_STVC8380 982 -+#define MACH_TYPE_TEKLYNX 983 -+#define MACH_TYPE_CARBONADO 984 -+#define MACH_TYPE_SYSMOS_MP730 985 -+#define MACH_TYPE_SNAPPER_CL15 986 -+#define MACH_TYPE_PGIGIM 987 -+#define MACH_TYPE_PTX9160P2 988 -+#define MACH_TYPE_DCORE1 989 -+#define MACH_TYPE_VICTORPXA 990 -+#define MACH_TYPE_MX2DTB 991 -+#define MACH_TYPE_PXA_IREX_ER0100 992 -+#define MACH_TYPE_OMAP_PALMZ71 993 -+#define MACH_TYPE_BARTEC_DEG 994 -+#define MACH_TYPE_HW50251 995 -+#define MACH_TYPE_IBOX 996 -+#define MACH_TYPE_ATLASLH7A404 997 -+#define MACH_TYPE_PT2026 998 -+#define MACH_TYPE_HTCALPINE 999 -+#define MACH_TYPE_BARTEC_VTU 1000 -+#define MACH_TYPE_VCOREII 1001 -+#define MACH_TYPE_PDNB3 1002 -+#define MACH_TYPE_HTCBEETLES 1003 -+#define MACH_TYPE_S3C6400 1004 -+#define MACH_TYPE_S3C2443 1005 -+#define MACH_TYPE_OMAP_LDK 1006 -+#define MACH_TYPE_SMDK2460 1007 -+#define MACH_TYPE_SMDK2440 1008 -+#define MACH_TYPE_SMDK2412 1009 -+#define MACH_TYPE_WEBBOX 1010 -+#define MACH_TYPE_CWWNDP 1011 -+#define MACH_TYPE_DRAGON 1012 -+#define MACH_TYPE_OPENDO_CPU_BOARD 1013 -+#define MACH_TYPE_CCM2200 1014 -+#define MACH_TYPE_ETWARM 1015 -+#define MACH_TYPE_M93030 1016 -+#define MACH_TYPE_CC7U 1017 -+#define MACH_TYPE_MTT_RANGER 1018 -+#define MACH_TYPE_NEXUS 1019 -+#define MACH_TYPE_DESMAN 1020 -+#define MACH_TYPE_BKDE303 1021 -+#define MACH_TYPE_SMDK2413 1022 -+#define MACH_TYPE_AML_M7200 1023 -+#define MACH_TYPE_AML_M5900 1024 -+#define MACH_TYPE_SG640 1025 -+#define MACH_TYPE_EDG79524 1026 -+#define MACH_TYPE_AI2410 1027 -+#define MACH_TYPE_IXP465 1028 -+#define MACH_TYPE_BALLOON3 1029 -+#define MACH_TYPE_QT2410 1108 - - #ifdef CONFIG_ARCH_EBSA110 - # ifdef machine_arch_type -@@ -3541,9 +3842,9 @@ # define machine_arch_type __machine_ar - # else - # define machine_arch_type MACH_TYPE_RAMSES - # endif --# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES) -+# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES) - #else --# define machine_is_ramses() (0) -+# define machine_is_mnci() (0) - #endif - - #ifdef CONFIG_ARCH_S28X -@@ -4501,9 +4802,9 @@ # define machine_arch_type __machine_ar - # else - # define machine_arch_type MACH_TYPE_M825XX - # endif --# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX) -+# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX) - #else --# define machine_is_m825xx() (0) -+# define machine_is_comcerto() (0) - #endif - - #ifdef CONFIG_SA1100_M7100 -@@ -5658,16 +5959,16 @@ #else - # define machine_is_xcep() (0) - #endif - --#ifdef CONFIG_MACH_ARCOM_MERCURY -+#ifdef CONFIG_MACH_ARCOM_VULCAN - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_ARCOM_MERCURY -+# define machine_arch_type MACH_TYPE_ARCOM_VULCAN - # endif --# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY) -+# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN) - #else --# define machine_is_arcom_mercury() (0) -+# define machine_is_arcom_vulcan() (0) - #endif - - #ifdef CONFIG_MACH_STARGATE -@@ -6054,16 +6355,16 @@ #else - # define machine_is_ess710() (0) - #endif - --#ifdef CONFIG_MACH_MX3ADS -+#ifdef CONFIG_MACH_MX31ADS - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_MX3ADS -+# define machine_arch_type MACH_TYPE_MX31ADS - # endif --# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS) -+# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS) - #else --# define machine_is_mx3ads() (0) -+# define machine_is_mx31ads() (0) - #endif - - #ifdef CONFIG_MACH_HIMALAYA -@@ -7333,9 +7634,9 @@ # define machine_arch_type __machine_ar - # else - # define machine_arch_type MACH_TYPE_ARGONPLUSEVB - # endif --# define machine_is_argonplusevb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) -+# define machine_is_i30030evb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) - #else --# define machine_is_argonplusevb() (0) -+# define machine_is_i30030evb() (0) - #endif - - #ifdef CONFIG_MACH_SCMA11EVB -@@ -7345,9 +7646,9 @@ # define machine_arch_type __machine_ar - # else - # define machine_arch_type MACH_TYPE_SCMA11EVB - # endif --# define machine_is_scma11evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) -+# define machine_is_mxc27530evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) - #else --# define machine_is_scma11evb() (0) -+# define machine_is_mxc27530evb() (0) - #endif - - #ifdef CONFIG_MACH_SMDK2800 -@@ -8305,9 +8606,9 @@ # define machine_arch_type __machine_ar - # else - # define machine_arch_type MACH_TYPE_SCMA11BB - # endif --# define machine_is_scma11bb() (machine_arch_type == MACH_TYPE_SCMA11BB) -+# define machine_is_mxc27530ads() (machine_arch_type == MACH_TYPE_SCMA11BB) - #else --# define machine_is_scma11bb() (0) -+# define machine_is_mxc27530ads() (0) - #endif - - #ifdef CONFIG_MACH_TRIZEPS3 -@@ -9193,9 +9494,9 @@ # define machine_arch_type __machine_ar - # else - # define machine_arch_type MACH_TYPE_ZEUSEVB - # endif --# define machine_is_zeusevb() (machine_arch_type == MACH_TYPE_ZEUSEVB) -+# define machine_is_mxc91131evb() (machine_arch_type == MACH_TYPE_ZEUSEVB) - #else --# define machine_is_zeusevb() (0) -+# define machine_is_mxc91131evb() (0) - #endif - - #ifdef CONFIG_MACH_P700 -@@ -9402,6 +9703,3630 @@ #else - # define machine_is_mp2usb() (0) - #endif - -+#ifdef CONFIG_MACH_NTNP425C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NTNP425C -+# endif -+# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C) -+#else -+# define machine_is_ntnp425c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COLIBRI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COLIBRI -+# endif -+# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI) -+#else -+# define machine_is_colibri() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PCM7220 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PCM7220 -+# endif -+# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220) -+#else -+# define machine_is_pcm7220() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GATEWAY7001 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GATEWAY7001 -+# endif -+# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001) -+#else -+# define machine_is_gateway7001() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PCM027 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PCM027 -+# endif -+# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027) -+#else -+# define machine_is_pcm027() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CMPXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CMPXA -+# endif -+# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA) -+#else -+# define machine_is_cmpxa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ANUBIS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ANUBIS -+# endif -+# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS) -+#else -+# define machine_is_anubis() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ITE8152 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ITE8152 -+# endif -+# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152) -+#else -+# define machine_is_ite8152() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LPC3XXX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LPC3XXX -+# endif -+# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX) -+#else -+# define machine_is_lpc3xxx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PUPPETEER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PUPPETEER -+# endif -+# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER) -+#else -+# define machine_is_puppeteer() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MACH_VADATECH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MACH_VADATECH -+# endif -+# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH) -+#else -+# define machine_is_vt001() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E570 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E570 -+# endif -+# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570) -+#else -+# define machine_is_e570() (0) -+#endif -+ -+#ifdef CONFIG_MACH_X50 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_X50 -+# endif -+# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50) -+#else -+# define machine_is_x50() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RECON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RECON -+# endif -+# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON) -+#else -+# define machine_is_recon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XBOARDGP8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XBOARDGP8 -+# endif -+# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8) -+#else -+# define machine_is_xboardgp8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FPIC2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FPIC2 -+# endif -+# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2) -+#else -+# define machine_is_fpic2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AKITA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AKITA -+# endif -+# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA) -+#else -+# define machine_is_akita() (0) -+#endif -+ -+#ifdef CONFIG_MACH_A81 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_A81 -+# endif -+# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81) -+#else -+# define machine_is_a81() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SVM_SC25X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SVM_SC25X -+# endif -+# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X) -+#else -+# define machine_is_svm_sc25x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VADATECH020 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VADATECH020 -+# endif -+# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020) -+#else -+# define machine_is_vt020() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TLI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TLI -+# endif -+# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI) -+#else -+# define machine_is_tli() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDB9315LC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDB9315LC -+# endif -+# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC) -+#else -+# define machine_is_edb9315lc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PASSEC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PASSEC -+# endif -+# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC) -+#else -+# define machine_is_passec() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS_TIGER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS_TIGER -+# endif -+# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER) -+#else -+# define machine_is_ds_tiger() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E310 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E310 -+# endif -+# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310) -+#else -+# define machine_is_e310() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E330 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E330 -+# endif -+# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330) -+#else -+# define machine_is_e330() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RT3000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RT3000 -+# endif -+# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000) -+#else -+# define machine_is_rt3000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NOKIA770 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NOKIA770 -+# endif -+# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770) -+#else -+# define machine_is_nokia770() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX0106 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX0106 -+# endif -+# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106) -+#else -+# define machine_is_pnx0106() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HX21XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HX21XX -+# endif -+# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX) -+#else -+# define machine_is_hx21xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FARADAY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FARADAY -+# endif -+# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY) -+#else -+# define machine_is_faraday() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SBC9312 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SBC9312 -+# endif -+# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312) -+#else -+# define machine_is_sbc9312() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BATMAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BATMAN -+# endif -+# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN) -+#else -+# define machine_is_batman() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JPD201 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JPD201 -+# endif -+# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201) -+#else -+# define machine_is_jpd201() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MIPSA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MIPSA -+# endif -+# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA) -+#else -+# define machine_is_mipsa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_KACOM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_KACOM -+# endif -+# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM) -+#else -+# define machine_is_kacom() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SWARCOCPU -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SWARCOCPU -+# endif -+# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU) -+#else -+# define machine_is_swarcocpu() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SWARCODSL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SWARCODSL -+# endif -+# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL) -+#else -+# define machine_is_swarcodsl() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BLUEANGEL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BLUEANGEL -+# endif -+# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL) -+#else -+# define machine_is_blueangel() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HAIRYGRAMA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HAIRYGRAMA -+# endif -+# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA) -+#else -+# define machine_is_hairygrama() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BANFF -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BANFF -+# endif -+# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF) -+#else -+# define machine_is_banff() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CARMEVA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CARMEVA -+# endif -+# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA) -+#else -+# define machine_is_carmeva() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAM255 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAM255 -+# endif -+# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255) -+#else -+# define machine_is_sam255() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PPM10 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PPM10 -+# endif -+# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10) -+#else -+# define machine_is_ppm10() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDB9315A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDB9315A -+# endif -+# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A) -+#else -+# define machine_is_edb9315a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SUNSET -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SUNSET -+# endif -+# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET) -+#else -+# define machine_is_sunset() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STARGATE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STARGATE2 -+# endif -+# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2) -+#else -+# define machine_is_stargate2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_INTELMOTE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_INTELMOTE2 -+# endif -+# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2) -+#else -+# define machine_is_intelmote2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TRIZEPS4 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TRIZEPS4 -+# endif -+# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4) -+#else -+# define machine_is_trizeps4() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAINSTONE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAINSTONE2 -+# endif -+# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2) -+#else -+# define machine_is_mainstone2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZ_IXP42X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZ_IXP42X -+# endif -+# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X) -+#else -+# define machine_is_ez_ixp42x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TAPWAVE_ZODIAC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC -+# endif -+# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC) -+#else -+# define machine_is_tapwave_zodiac() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UNIVERSALMETER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UNIVERSALMETER -+# endif -+# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER) -+#else -+# define machine_is_universalmeter() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HICOARM9 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HICOARM9 -+# endif -+# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9) -+#else -+# define machine_is_hicoarm9() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX4008 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX4008 -+# endif -+# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008) -+#else -+# define machine_is_pnx4008() (0) -+#endif -+ -+#ifdef CONFIG_MACH_KWS6000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_KWS6000 -+# endif -+# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000) -+#else -+# define machine_is_kws6000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PORTUX920T -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PORTUX920T -+# endif -+# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T) -+#else -+# define machine_is_portux920t() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZ_X5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZ_X5 -+# endif -+# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5) -+#else -+# define machine_is_ez_x5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_RUDOLPH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH -+# endif -+# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH) -+#else -+# define machine_is_omap_rudolph() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CPUAT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CPUAT91 -+# endif -+# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91) -+#else -+# define machine_is_cpuat91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REA9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REA9200 -+# endif -+# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200) -+#else -+# define machine_is_rea9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACTS_PUNE_SA1110 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110 -+# endif -+# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110) -+#else -+# define machine_is_acts_pune_sa1110() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXP425 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXP425 -+# endif -+# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425) -+#else -+# define machine_is_ixp425() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARGONPLUSODYSSEY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARGONPLUSODYSSEY -+# endif -+# define machine_is_i30030ads() (machine_arch_type == MACH_TYPE_ARGONPLUSODYSSEY) -+#else -+# define machine_is_i30030ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PERCH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PERCH -+# endif -+# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH) -+#else -+# define machine_is_perch() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EIS05R1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EIS05R1 -+# endif -+# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1) -+#else -+# define machine_is_eis05r1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PEPPERPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PEPPERPAD -+# endif -+# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD) -+#else -+# define machine_is_pepperpad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SB3010 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SB3010 -+# endif -+# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010) -+#else -+# define machine_is_sb3010() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RM9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RM9200 -+# endif -+# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200) -+#else -+# define machine_is_rm9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DMA03 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DMA03 -+# endif -+# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03) -+#else -+# define machine_is_dma03() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ROAD_S101 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ROAD_S101 -+# endif -+# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101) -+#else -+# define machine_is_road_s101() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A -+# endif -+# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A) -+#else -+# define machine_is_iq_nextgen_a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_B -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B -+# endif -+# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B) -+#else -+# define machine_is_iq_nextgen_b() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C -+# endif -+# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C) -+#else -+# define machine_is_iq_nextgen_c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D -+# endif -+# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D) -+#else -+# define machine_is_iq_nextgen_d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_E -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E -+# endif -+# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E) -+#else -+# define machine_is_iq_nextgen_e() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MALLOW_AT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MALLOW_AT91 -+# endif -+# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91) -+#else -+# define machine_is_mallow_at91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CYBERTRACKER_I -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CYBERTRACKER_I -+# endif -+# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I) -+#else -+# define machine_is_cybertracker_i() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GESBC931X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GESBC931X -+# endif -+# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X) -+#else -+# define machine_is_gesbc931x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CENTIPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CENTIPAD -+# endif -+# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD) -+#else -+# define machine_is_centipad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARMSOC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARMSOC -+# endif -+# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC) -+#else -+# define machine_is_armsoc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SE4200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SE4200 -+# endif -+# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200) -+#else -+# define machine_is_se4200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMS197A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMS197A -+# endif -+# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A) -+#else -+# define machine_is_ems197a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MICRO9 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MICRO9 -+# endif -+# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9) -+#else -+# define machine_is_micro9() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MICRO9L -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MICRO9L -+# endif -+# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L) -+#else -+# define machine_is_micro9l() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UC5471DSP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UC5471DSP -+# endif -+# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP) -+#else -+# define machine_is_uc5471dsp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SJ5471ENG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SJ5471ENG -+# endif -+# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG) -+#else -+# define machine_is_sj5471eng() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CMPXA26X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CMPXA26X -+# endif -+# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X) -+#else -+# define machine_is_none() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NC -+# endif -+# define machine_is_nc1() (machine_arch_type == MACH_TYPE_NC) -+#else -+# define machine_is_nc1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTE -+# endif -+# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE) -+#else -+# define machine_is_omap_palmte() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AJAX52X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AJAX52X -+# endif -+# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X) -+#else -+# define machine_is_ajax52x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIRIUSTAR -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIRIUSTAR -+# endif -+# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR) -+#else -+# define machine_is_siriustar() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IODATA_HDLG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IODATA_HDLG -+# endif -+# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG) -+#else -+# define machine_is_iodata_hdlg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91RM9200UTL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91RM9200UTL -+# endif -+# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL) -+#else -+# define machine_is_at91rm9200utl() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BIOSAFE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BIOSAFE -+# endif -+# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE) -+#else -+# define machine_is_biosafe() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MP1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MP1000 -+# endif -+# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000) -+#else -+# define machine_is_mp1000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PARSY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PARSY -+# endif -+# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY) -+#else -+# define machine_is_parsy() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CCXP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CCXP -+# endif -+# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP) -+#else -+# define machine_is_ccxp270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_GSAMPLE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE -+# endif -+# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE) -+#else -+# define machine_is_omap_gsample() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REALVIEW_EB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REALVIEW_EB -+# endif -+# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB) -+#else -+# define machine_is_realview_eb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAMOA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAMOA -+# endif -+# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA) -+#else -+# define machine_is_samoa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_T3XSCALE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_T3XSCALE -+# endif -+# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE) -+#else -+# define machine_is_t3xscale() (0) -+#endif -+ -+#ifdef CONFIG_MACH_I878 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_I878 -+# endif -+# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878) -+#else -+# define machine_is_i878() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BORZOI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BORZOI -+# endif -+# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI) -+#else -+# define machine_is_borzoi() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GECKO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GECKO -+# endif -+# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO) -+#else -+# define machine_is_gecko() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS101 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS101 -+# endif -+# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101) -+#else -+# define machine_is_ds101() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTT2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTT2 -+# endif -+# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2) -+#else -+# define machine_is_omap_palmtt2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMLD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMLD -+# endif -+# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD) -+#else -+# define machine_is_xscale_palmld() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CC9C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CC9C -+# endif -+# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C) -+#else -+# define machine_is_cc9c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SBC1670 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SBC1670 -+# endif -+# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670) -+#else -+# define machine_is_sbc1670() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXDP28X5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXDP28X5 -+# endif -+# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5) -+#else -+# define machine_is_ixdp28x5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTT -+# endif -+# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT) -+#else -+# define machine_is_omap_palmtt() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ML696K -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ML696K -+# endif -+# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K) -+#else -+# define machine_is_ml696k() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARCOM_ZEUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARCOM_ZEUS -+# endif -+# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS) -+#else -+# define machine_is_arcom_zeus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OSIRIS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OSIRIS -+# endif -+# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS) -+#else -+# define machine_is_osiris() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAESTRO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAESTRO -+# endif -+# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO) -+#else -+# define machine_is_maestro() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TUNGE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TUNGE2 -+# endif -+# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2) -+#else -+# define machine_is_tunge2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXBBM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXBBM -+# endif -+# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM) -+#else -+# define machine_is_ixbbm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX27 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX27 -+# endif -+# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27) -+#else -+# define machine_is_mx27ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AX8004 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AX8004 -+# endif -+# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004) -+#else -+# define machine_is_ax8004() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91SAM9261EK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91SAM9261EK -+# endif -+# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK) -+#else -+# define machine_is_at91sam9261ek() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LOFT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LOFT -+# endif -+# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT) -+#else -+# define machine_is_loft() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAGPIE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAGPIE -+# endif -+# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE) -+#else -+# define machine_is_magpie() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX21 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX21 -+# endif -+# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21) -+#else -+# define machine_is_mx21ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MB87M3400 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MB87M3400 -+# endif -+# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400) -+#else -+# define machine_is_mb87m3400() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MGUARD_DELTA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MGUARD_DELTA -+# endif -+# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA) -+#else -+# define machine_is_mguard_delta() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DAVINCI_DVDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DAVINCI_DVDP -+# endif -+# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP) -+#else -+# define machine_is_davinci_dvdp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCUNIVERSAL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCUNIVERSAL -+# endif -+# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL) -+#else -+# define machine_is_htcuniversal() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TPAD -+# endif -+# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD) -+#else -+# define machine_is_tpad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ROVERP3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ROVERP3 -+# endif -+# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3) -+#else -+# define machine_is_roverp3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JORNADA928 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JORNADA928 -+# endif -+# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928) -+#else -+# define machine_is_jornada928() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MV88FXX81 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MV88FXX81 -+# endif -+# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81) -+#else -+# define machine_is_mv88fxx81() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STMP36XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STMP36XX -+# endif -+# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX) -+#else -+# define machine_is_stmp36xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SXNI79524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SXNI79524 -+# endif -+# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524) -+#else -+# define machine_is_sxni79524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AMS_DELTA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AMS_DELTA -+# endif -+# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA) -+#else -+# define machine_is_ams_delta() (0) -+#endif -+ -+#ifdef CONFIG_MACH_URANIUM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_URANIUM -+# endif -+# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM) -+#else -+# define machine_is_uranium() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UCON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UCON -+# endif -+# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON) -+#else -+# define machine_is_ucon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NAS100D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NAS100D -+# endif -+# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D) -+#else -+# define machine_is_nas100d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_L083_1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_L083_1000 -+# endif -+# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000) -+#else -+# define machine_is_l083() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZX -+# endif -+# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX) -+#else -+# define machine_is_ezx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX5220 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX5220 -+# endif -+# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220) -+#else -+# define machine_is_pnx5220() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BUTTE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BUTTE -+# endif -+# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE) -+#else -+# define machine_is_butte() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SRM2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SRM2 -+# endif -+# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2) -+#else -+# define machine_is_srm2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DSBR -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DSBR -+# endif -+# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR) -+#else -+# define machine_is_dsbr() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CRYSTALBALL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CRYSTALBALL -+# endif -+# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL) -+#else -+# define machine_is_crystalball() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TINYPXA27X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TINYPXA27X -+# endif -+# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X) -+#else -+# define machine_is_tinypxa27x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HERBIE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HERBIE -+# endif -+# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE) -+#else -+# define machine_is_herbie() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAGICIAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAGICIAN -+# endif -+# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN) -+#else -+# define machine_is_magician() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM4002 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM4002 -+# endif -+# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002) -+#else -+# define machine_is_cm4002() (0) -+#endif -+ -+#ifdef CONFIG_MACH_B4 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_B4 -+# endif -+# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4) -+#else -+# define machine_is_b4() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAUI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAUI -+# endif -+# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI) -+#else -+# define machine_is_maui() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CYBERTRACKER_G -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CYBERTRACKER_G -+# endif -+# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G) -+#else -+# define machine_is_cybertracker_g() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXDKN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXDKN -+# endif -+# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN) -+#else -+# define machine_is_nxdkn() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MIO8390 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MIO8390 -+# endif -+# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390) -+#else -+# define machine_is_mio8390() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMI_BOARD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMI_BOARD -+# endif -+# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD) -+#else -+# define machine_is_omi_board() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX21CIV -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX21CIV -+# endif -+# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV) -+#else -+# define machine_is_mx21civ() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAHI_CDAC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAHI_CDAC -+# endif -+# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC) -+#else -+# define machine_is_mahi_cdac() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTX -+# endif -+# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX) -+#else -+# define machine_is_xscale_palmtx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C2413 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C2413 -+# endif -+# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413) -+#else -+# define machine_is_s3c2413() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAMSYS_EP0 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAMSYS_EP0 -+# endif -+# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0) -+#else -+# define machine_is_samsys_ep0() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WG302V1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WG302V1 -+# endif -+# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1) -+#else -+# define machine_is_wg302v1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WG302V2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WG302V2 -+# endif -+# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2) -+#else -+# define machine_is_wg302v2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EB42X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EB42X -+# endif -+# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X) -+#else -+# define machine_is_eb42x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ331ES -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ331ES -+# endif -+# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES) -+#else -+# define machine_is_iq331es() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COSYDSP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COSYDSP -+# endif -+# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP) -+#else -+# define machine_is_cosydsp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UPLAT7D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UPLAT7D -+# endif -+# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D) -+#else -+# define machine_is_uplat7d_proto() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PTDAVINCI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PTDAVINCI -+# endif -+# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI) -+#else -+# define machine_is_ptdavinci() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MBUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MBUS -+# endif -+# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS) -+#else -+# define machine_is_mbus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NADIA2VB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NADIA2VB -+# endif -+# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB) -+#else -+# define machine_is_nadia2vb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_R1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_R1000 -+# endif -+# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000) -+#else -+# define machine_is_r1000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HW90250 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HW90250 -+# endif -+# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250) -+#else -+# define machine_is_hw90250() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_2430SDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_2430SDP -+# endif -+# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP) -+#else -+# define machine_is_omap_2430sdp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DAVINCI_EVM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DAVINCI_EVM -+# endif -+# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM) -+#else -+# define machine_is_davinci_evm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_TORNADO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_TORNADO -+# endif -+# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO) -+#else -+# define machine_is_omap_tornado() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OLOCREEK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OLOCREEK -+# endif -+# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK) -+#else -+# define machine_is_olocreek() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PALMZ72 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PALMZ72 -+# endif -+# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72) -+#else -+# define machine_is_palmz72() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXDB500 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXDB500 -+# endif -+# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500) -+#else -+# define machine_is_nxdb500() (0) -+#endif -+ -+#ifdef CONFIG_MACH_APF9328 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_APF9328 -+# endif -+# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328) -+#else -+# define machine_is_apf9328() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_WIPOQ -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_WIPOQ -+# endif -+# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ) -+#else -+# define machine_is_omap_wipoq() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_TWIP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_TWIP -+# endif -+# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP) -+#else -+# define machine_is_omap_twip() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTREO650 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650 -+# endif -+# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650) -+#else -+# define machine_is_xscale_treo650() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACUMEN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACUMEN -+# endif -+# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN) -+#else -+# define machine_is_acumen() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XP100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XP100 -+# endif -+# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100) -+#else -+# define machine_is_xp100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FS2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FS2410 -+# endif -+# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410) -+#else -+# define machine_is_fs2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA270_CERF -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA270_CERF -+# endif -+# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF) -+#else -+# define machine_is_pxa270_cerf() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SQ2FTLPALM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SQ2FTLPALM -+# endif -+# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM) -+#else -+# define machine_is_sq2ftlpalm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BSEMSERVER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BSEMSERVER -+# endif -+# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER) -+#else -+# define machine_is_bsemserver() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NETCLIENT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NETCLIENT -+# endif -+# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT) -+#else -+# define machine_is_netclient() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTT5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5 -+# endif -+# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5) -+#else -+# define machine_is_xscale_palmtt5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTC -+# endif -+# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC) -+#else -+# define machine_is_xscale_palmtc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_APOLLON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_APOLLON -+# endif -+# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) -+#else -+# define machine_is_omap_apollon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARGONLVEVB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARGONLVEVB -+# endif -+# define machine_is_mxc30030evb() (machine_arch_type == MACH_TYPE_ARGONLVEVB) -+#else -+# define machine_is_mxc30030evb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REA_2D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REA_2D -+# endif -+# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D) -+#else -+# define machine_is_rea_2d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TI3E524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TI3E524 -+# endif -+# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524) -+#else -+# define machine_is_eti3e524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ATEB9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ATEB9200 -+# endif -+# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200) -+#else -+# define machine_is_ateb9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AUCKLAND -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AUCKLAND -+# endif -+# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND) -+#else -+# define machine_is_auckland() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AK3320M -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AK3320M -+# endif -+# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M) -+#else -+# define machine_is_ak3220m() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DURAMAX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DURAMAX -+# endif -+# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX) -+#else -+# define machine_is_duramax() (0) -+#endif -+ -+#ifdef CONFIG_MACH_N35 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_N35 -+# endif -+# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35) -+#else -+# define machine_is_n35() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PRONGHORN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PRONGHORN -+# endif -+# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN) -+#else -+# define machine_is_pronghorn() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FUNDY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FUNDY -+# endif -+# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY) -+#else -+# define machine_is_fundy() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LOGICPD_PXA270 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LOGICPD_PXA270 -+# endif -+# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270) -+#else -+# define machine_is_logicpd_pxa270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CPU777 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CPU777 -+# endif -+# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777) -+#else -+# define machine_is_cpu777() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIMICON9201 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIMICON9201 -+# endif -+# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201) -+#else -+# define machine_is_simicon9201() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LEAP2_HPM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LEAP2_HPM -+# endif -+# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM) -+#else -+# define machine_is_leap2_hpm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM922TXA10 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM922TXA10 -+# endif -+# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10) -+#else -+# define machine_is_cm922txa10() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA -+# endif -+# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA) -+#else -+# define machine_is_sandgate() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2 -+# endif -+# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2) -+#else -+# define machine_is_sandgate2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2G -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2G -+# endif -+# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G) -+#else -+# define machine_is_sandgate2g() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2P -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2P -+# endif -+# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P) -+#else -+# define machine_is_sandgate2p() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FRED_JACK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FRED_JACK -+# endif -+# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK) -+#else -+# define machine_is_fred_jack() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TTG_COLOR1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TTG_COLOR1 -+# endif -+# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1) -+#else -+# define machine_is_ttg_color1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXEB500HMI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXEB500HMI -+# endif -+# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI) -+#else -+# define machine_is_nxeb500hmi() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NETDCU8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NETDCU8 -+# endif -+# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8) -+#else -+# define machine_is_netdcu8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ML675050_CPU_BOA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA -+# endif -+# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA) -+#else -+# define machine_is_ml675050_cpu_boa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NG_FVX538 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NG_FVX538 -+# endif -+# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538) -+#else -+# define machine_is_ng_fvx538() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NG_FVS338 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NG_FVS338 -+# endif -+# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338) -+#else -+# define machine_is_ng_fvs338() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX4103 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX4103 -+# endif -+# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103) -+#else -+# define machine_is_pnx4103() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HESDB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HESDB -+# endif -+# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB) -+#else -+# define machine_is_hesdb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSILO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSILO -+# endif -+# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO) -+#else -+# define machine_is_xsilo() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESPRESSO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESPRESSO -+# endif -+# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO) -+#else -+# define machine_is_espresso() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMLC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMLC -+# endif -+# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC) -+#else -+# define machine_is_emlc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SISTERON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SISTERON -+# endif -+# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON) -+#else -+# define machine_is_sisteron() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RX1950 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RX1950 -+# endif -+# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950) -+#else -+# define machine_is_rx1950() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TSC_VENUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TSC_VENUS -+# endif -+# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS) -+#else -+# define machine_is_tsc_venus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS101J -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS101J -+# endif -+# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J) -+#else -+# define machine_is_ds101j() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MXC30030ADS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MXC30030ADS -+# endif -+# define machine_is_mxc30030ads() (machine_arch_type == MACH_TYPE_MXC30030ADS) -+#else -+# define machine_is_mxc30030ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC -+# endif -+# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC) -+#else -+# define machine_is_fujitsu_wimaxsoc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DUALPCMODEM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DUALPCMODEM -+# endif -+# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM) -+#else -+# define machine_is_dualpcmodem() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GESBC9312 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GESBC9312 -+# endif -+# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312) -+#else -+# define machine_is_gesbc9312() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCAPACHE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCAPACHE -+# endif -+# define machine_is_htcapache() (machine_arch_type == MACH_TYPE_HTCAPACHE) -+#else -+# define machine_is_htcapache() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXDP435 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXDP435 -+# endif -+# define machine_is_ixdp435() (machine_arch_type == MACH_TYPE_IXDP435) -+#else -+# define machine_is_ixdp435() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CATPROVT100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CATPROVT100 -+# endif -+# define machine_is_catprovt100() (machine_arch_type == MACH_TYPE_CATPROVT100) -+#else -+# define machine_is_catprovt100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOTUX1XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOTUX1XX -+# endif -+# define machine_is_picotux1xx() (machine_arch_type == MACH_TYPE_PICOTUX1XX) -+#else -+# define machine_is_picotux1xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOTUX2XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOTUX2XX -+# endif -+# define machine_is_picotux2xx() (machine_arch_type == MACH_TYPE_PICOTUX2XX) -+#else -+# define machine_is_picotux2xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DSMG600 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DSMG600 -+# endif -+# define machine_is_dsmg600() (machine_arch_type == MACH_TYPE_DSMG600) -+#else -+# define machine_is_dsmg600() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMPC2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMPC2 -+# endif -+# define machine_is_empc2() (machine_arch_type == MACH_TYPE_EMPC2) -+#else -+# define machine_is_empc2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VENTURA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VENTURA -+# endif -+# define machine_is_ventura() (machine_arch_type == MACH_TYPE_VENTURA) -+#else -+# define machine_is_ventura() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PHIDGET_SBC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PHIDGET_SBC -+# endif -+# define machine_is_phidget_sbc() (machine_arch_type == MACH_TYPE_PHIDGET_SBC) -+#else -+# define machine_is_phidget_sbc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IJ3K -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IJ3K -+# endif -+# define machine_is_ij3k() (machine_arch_type == MACH_TYPE_IJ3K) -+#else -+# define machine_is_ij3k() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PISGAH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PISGAH -+# endif -+# define machine_is_pisgah() (machine_arch_type == MACH_TYPE_PISGAH) -+#else -+# define machine_is_pisgah() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_FSAMPLE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_FSAMPLE -+# endif -+# define machine_is_omap_fsample() (machine_arch_type == MACH_TYPE_OMAP_FSAMPLE) -+#else -+# define machine_is_omap_fsample() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG720 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG720 -+# endif -+# define machine_is_sg720() (machine_arch_type == MACH_TYPE_SG720) -+#else -+# define machine_is_sg720() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REDFOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REDFOX -+# endif -+# define machine_is_redfox() (machine_arch_type == MACH_TYPE_REDFOX) -+#else -+# define machine_is_redfox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MYSH_EP9315_1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MYSH_EP9315_1 -+# endif -+# define machine_is_mysh_ep9315_1() (machine_arch_type == MACH_TYPE_MYSH_EP9315_1) -+#else -+# define machine_is_mysh_ep9315_1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TPF106 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TPF106 -+# endif -+# define machine_is_tpf106() (machine_arch_type == MACH_TYPE_TPF106) -+#else -+# define machine_is_tpf106() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91RM9200KG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91RM9200KG -+# endif -+# define machine_is_at91rm9200kg() (machine_arch_type == MACH_TYPE_AT91RM9200KG) -+#else -+# define machine_is_at91rm9200kg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SLEDB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SLEDB -+# endif -+# define machine_is_racemt2() (machine_arch_type == MACH_TYPE_SLEDB) -+#else -+# define machine_is_racemt2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ONTRACK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ONTRACK -+# endif -+# define machine_is_ontrack() (machine_arch_type == MACH_TYPE_ONTRACK) -+#else -+# define machine_is_ontrack() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PM1200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PM1200 -+# endif -+# define machine_is_pm1200() (machine_arch_type == MACH_TYPE_PM1200) -+#else -+# define machine_is_pm1200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESS24XXX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESS24XXX -+# endif -+# define machine_is_ess24562() (machine_arch_type == MACH_TYPE_ESS24XXX) -+#else -+# define machine_is_ess24562() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COREMP7 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COREMP7 -+# endif -+# define machine_is_coremp7() (machine_arch_type == MACH_TYPE_COREMP7) -+#else -+# define machine_is_coremp7() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEXCODER_6446 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEXCODER_6446 -+# endif -+# define machine_is_nexcoder_6446() (machine_arch_type == MACH_TYPE_NEXCODER_6446) -+#else -+# define machine_is_nexcoder_6446() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STVC8380 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STVC8380 -+# endif -+# define machine_is_stvc8380() (machine_arch_type == MACH_TYPE_STVC8380) -+#else -+# define machine_is_stvc8380() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TEKLYNX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TEKLYNX -+# endif -+# define machine_is_teklynx() (machine_arch_type == MACH_TYPE_TEKLYNX) -+#else -+# define machine_is_teklynx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CARBONADO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CARBONADO -+# endif -+# define machine_is_carbonado() (machine_arch_type == MACH_TYPE_CARBONADO) -+#else -+# define machine_is_carbonado() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SYSMOS_MP730 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SYSMOS_MP730 -+# endif -+# define machine_is_sysmos_mp730() (machine_arch_type == MACH_TYPE_SYSMOS_MP730) -+#else -+# define machine_is_sysmos_mp730() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SNAPPER_CL15 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SNAPPER_CL15 -+# endif -+# define machine_is_snapper_cl15() (machine_arch_type == MACH_TYPE_SNAPPER_CL15) -+#else -+# define machine_is_snapper_cl15() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PGIGIM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PGIGIM -+# endif -+# define machine_is_pgigim() (machine_arch_type == MACH_TYPE_PGIGIM) -+#else -+# define machine_is_pgigim() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PTX9160P2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PTX9160P2 -+# endif -+# define machine_is_ptx9160p2() (machine_arch_type == MACH_TYPE_PTX9160P2) -+#else -+# define machine_is_ptx9160p2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DCORE1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DCORE1 -+# endif -+# define machine_is_dcore1() (machine_arch_type == MACH_TYPE_DCORE1) -+#else -+# define machine_is_dcore1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VICTORPXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VICTORPXA -+# endif -+# define machine_is_victorpxa() (machine_arch_type == MACH_TYPE_VICTORPXA) -+#else -+# define machine_is_victorpxa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX2DTB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX2DTB -+# endif -+# define machine_is_mx2dtb() (machine_arch_type == MACH_TYPE_MX2DTB) -+#else -+# define machine_is_mx2dtb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA_IREX_ER0100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA_IREX_ER0100 -+# endif -+# define machine_is_pxa_irex_er0100() (machine_arch_type == MACH_TYPE_PXA_IREX_ER0100) -+#else -+# define machine_is_pxa_irex_er0100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMZ71 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMZ71 -+# endif -+# define machine_is_omap_palmz71() (machine_arch_type == MACH_TYPE_OMAP_PALMZ71) -+#else -+# define machine_is_omap_palmz71() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BARTEC_DEG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BARTEC_DEG -+# endif -+# define machine_is_bartec_deg() (machine_arch_type == MACH_TYPE_BARTEC_DEG) -+#else -+# define machine_is_bartec_deg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HW50251 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HW50251 -+# endif -+# define machine_is_hw50251() (machine_arch_type == MACH_TYPE_HW50251) -+#else -+# define machine_is_hw50251() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IBOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IBOX -+# endif -+# define machine_is_ibox() (machine_arch_type == MACH_TYPE_IBOX) -+#else -+# define machine_is_ibox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ATLASLH7A404 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ATLASLH7A404 -+# endif -+# define machine_is_atlaslh7a404() (machine_arch_type == MACH_TYPE_ATLASLH7A404) -+#else -+# define machine_is_atlaslh7a404() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PT2026 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PT2026 -+# endif -+# define machine_is_pt2026() (machine_arch_type == MACH_TYPE_PT2026) -+#else -+# define machine_is_pt2026() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCALPINE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCALPINE -+# endif -+# define machine_is_htcalpine() (machine_arch_type == MACH_TYPE_HTCALPINE) -+#else -+# define machine_is_htcalpine() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BARTEC_VTU -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BARTEC_VTU -+# endif -+# define machine_is_bartec_vtu() (machine_arch_type == MACH_TYPE_BARTEC_VTU) -+#else -+# define machine_is_bartec_vtu() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VCOREII -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VCOREII -+# endif -+# define machine_is_vcoreii() (machine_arch_type == MACH_TYPE_VCOREII) -+#else -+# define machine_is_vcoreii() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PDNB3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PDNB3 -+# endif -+# define machine_is_pdnb3() (machine_arch_type == MACH_TYPE_PDNB3) -+#else -+# define machine_is_pdnb3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCBEETLES -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCBEETLES -+# endif -+# define machine_is_htcbeetles() (machine_arch_type == MACH_TYPE_HTCBEETLES) -+#else -+# define machine_is_htcbeetles() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C6400 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C6400 -+# endif -+# define machine_is_s3c6400() (machine_arch_type == MACH_TYPE_S3C6400) -+#else -+# define machine_is_s3c6400() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C2443 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C2443 -+# endif -+# define machine_is_s3c2443() (machine_arch_type == MACH_TYPE_S3C2443) -+#else -+# define machine_is_s3c2443() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_LDK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_LDK -+# endif -+# define machine_is_omap_ldk() (machine_arch_type == MACH_TYPE_OMAP_LDK) -+#else -+# define machine_is_omap_ldk() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2460 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2460 -+# endif -+# define machine_is_smdk2460() (machine_arch_type == MACH_TYPE_SMDK2460) -+#else -+# define machine_is_smdk2460() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2440 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2440 -+# endif -+# define machine_is_smdk2440() (machine_arch_type == MACH_TYPE_SMDK2440) -+#else -+# define machine_is_smdk2440() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2412 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2412 -+# endif -+# define machine_is_smdk2412() (machine_arch_type == MACH_TYPE_SMDK2412) -+#else -+# define machine_is_smdk2412() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WEBBOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WEBBOX -+# endif -+# define machine_is_webbox() (machine_arch_type == MACH_TYPE_WEBBOX) -+#else -+# define machine_is_webbox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CWWNDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CWWNDP -+# endif -+# define machine_is_cwwndp() (machine_arch_type == MACH_TYPE_CWWNDP) -+#else -+# define machine_is_cwwndp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DRAGON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DRAGON -+# endif -+# define machine_is_dragon() (machine_arch_type == MACH_TYPE_DRAGON) -+#else -+# define machine_is_dragon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OPENDO_CPU_BOARD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OPENDO_CPU_BOARD -+# endif -+# define machine_is_opendo_cpu_board() (machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD) -+#else -+# define machine_is_opendo_cpu_board() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CCM2200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CCM2200 -+# endif -+# define machine_is_ccm2200() (machine_arch_type == MACH_TYPE_CCM2200) -+#else -+# define machine_is_ccm2200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ETWARM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ETWARM -+# endif -+# define machine_is_etwarm() (machine_arch_type == MACH_TYPE_ETWARM) -+#else -+# define machine_is_etwarm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_M93030 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_M93030 -+# endif -+# define machine_is_m93030() (machine_arch_type == MACH_TYPE_M93030) -+#else -+# define machine_is_m93030() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CC7U -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CC7U -+# endif -+# define machine_is_cc7u() (machine_arch_type == MACH_TYPE_CC7U) -+#else -+# define machine_is_cc7u() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MTT_RANGER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MTT_RANGER -+# endif -+# define machine_is_mtt_ranger() (machine_arch_type == MACH_TYPE_MTT_RANGER) -+#else -+# define machine_is_mtt_ranger() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEXUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEXUS -+# endif -+# define machine_is_nexus() (machine_arch_type == MACH_TYPE_NEXUS) -+#else -+# define machine_is_nexus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DESMAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DESMAN -+# endif -+# define machine_is_desman() (machine_arch_type == MACH_TYPE_DESMAN) -+#else -+# define machine_is_desman() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BKDE303 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BKDE303 -+# endif -+# define machine_is_bkde303() (machine_arch_type == MACH_TYPE_BKDE303) -+#else -+# define machine_is_bkde303() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2413 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2413 -+# endif -+# define machine_is_smdk2413() (machine_arch_type == MACH_TYPE_SMDK2413) -+#else -+# define machine_is_smdk2413() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AML_M7200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AML_M7200 -+# endif -+# define machine_is_aml_m7200() (machine_arch_type == MACH_TYPE_AML_M7200) -+#else -+# define machine_is_aml_m7200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AML_M5900 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AML_M5900 -+# endif -+# define machine_is_aml_m5900() (machine_arch_type == MACH_TYPE_AML_M5900) -+#else -+# define machine_is_aml_m5900() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG640 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG640 -+# endif -+# define machine_is_sg640() (machine_arch_type == MACH_TYPE_SG640) -+#else -+# define machine_is_sg640() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDG79524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDG79524 -+# endif -+# define machine_is_edg79524() (machine_arch_type == MACH_TYPE_EDG79524) -+#else -+# define machine_is_edg79524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AI2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AI2410 -+# endif -+# define machine_is_ai2410() (machine_arch_type == MACH_TYPE_AI2410) -+#else -+# define machine_is_ai2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXP465 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXP465 -+# endif -+# define machine_is_ixp465() (machine_arch_type == MACH_TYPE_IXP465) -+#else -+# define machine_is_ixp465() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BALLOON3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BALLOON3 -+# endif -+# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3) -+#else -+# define machine_is_balloon3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_QT2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_QT2410 -+# endif -+# define machine_is_qt2410() (machine_arch_type == MACH_TYPE_QT2410) -+#else -+# define machine_is_qt2410() (0) -+#endif -+ - /* - * These have not yet been registered - */ -diff --git a/include/configs/qt2410.h b/include/configs/qt2410.h -new file mode 100644 -index 0000000..627f365 ---- /dev/null -+++ b/include/configs/qt2410.h -@@ -0,0 +1,256 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * Gary Jennejohn <gj@denx.de> -+ * David Mueller <d.mueller@elsoft.ch> -+ * -+ * Configuation settings for the SAMSUNG SMDK2410 board. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#if 0 -+/* If we want to start u-boot from usb bootloader in NOR flash */ -+#define CONFIG_SKIP_RELOCATE_UBOOT 1 -+#define CONFIG_SKIP_LOWLEVEL_INIT 1 -+#else -+/* If we want to start u-boot directly from within NAND flash */ -+#define CONFIG_S3C2410_NAND_BOOT 1 -+#endif -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -+#define CS8900_BASE 0x19000300 -+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ -+#define CONFIG_HWFLOW 1 -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS \ -+ (CONFIG_CMD_DFL | \ -+ CFG_CMD_BSP | \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_DATE | \ -+ CFG_CMD_DHCP | \ -+ CFG_CMD_DIAG | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_EXT2 | \ -+ CFG_CMD_FAT | \ -+ CFG_CMD_HWFLOW | \ -+ /* CFG_CMD_IDE | */ \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PING | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_USB) -+ -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttySAC0,115200 loglevel=8 rootdelay=10" -+/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */ -+#define CONFIG_NETMASK 255.255.255.0 -+#define CONFIG_IPADDR 10.0.0.110 -+#define CONFIG_SERVERIP 10.0.0.1 -+/*#define CONFIG_BOOTFILE "elinos-lart" */ -+#define CONFIG_BOOTCOMMAND "mmcinit; ext2load mmc 0 0x32000000 uImage; bootm 0x32000000" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 16 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x33000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+/* IDE/ATA config */ -+ -+#if 0 -+#define CFG_IDE_MAXBUS 1 -+#define CFG_IDE_MAXDEVICE 2 -+#define CFG_IDE_PREINIT 0 -+ -+#define CFG_ATA_BASE_ADDR -+#endif -+ -+#define CONFIG_USB_OHCI 1 -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ -+ -+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -+ -+#define CFG_FLASH_BASE PHYS_FLASH_1 -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -+#if 0 -+#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -+#endif -+ -+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -+#ifdef CONFIG_AMD_LV800 -+#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -+#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ -+#endif -+#ifdef CONFIG_AMD_LV400 -+#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -+#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ -+#endif -+ -+/* timeout values are in ticks */ -+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+#define CONFIG_EXT2 1 -+ -+/* FAT driver in u-boot is broken currently */ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#endif -+ -+ -+#if 0 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#endif /* __CONFIG_H */ -diff --git a/include/s3c2410.h b/include/s3c2410.h -index 86495f6..913521d 100644 ---- a/include/s3c2410.h -+++ b/include/s3c2410.h -@@ -38,12 +38,6 @@ #define S3C24X0_SPI_CHANNELS 2 - #define S3C2410_ECCSIZE 512 - #define S3C2410_ECCBYTES 3 - --typedef enum { -- S3C24X0_UART0, -- S3C24X0_UART1, -- S3C24X0_UART2 --} S3C24X0_UARTS_NR; -- - /* S3C2410 device base addresses */ - #define S3C24X0_MEMCTL_BASE 0x48000000 - #define S3C24X0_USB_HOST_BASE 0x49000000 -@@ -65,9 +59,23 @@ #define S3C24X0_SPI_BASE 0x59000000 - #define S3C2410_SDI_BASE 0x5A000000 - - -+#define oNFCONF 0x00 -+#define oNFCMD 0x04 -+#define oNFADDR 0x08 -+#define oNFDATA 0x0C -+#define oNFSTAT 0x10 -+#define oNFECC 0x14 -+ -+#ifndef __ASSEMBLER__ -+ - /* include common stuff */ - #include <s3c24x0.h> - -+typedef enum { -+ S3C24X0_UART0, -+ S3C24X0_UART1, -+ S3C24X0_UART2 -+} S3C24X0_UARTS_NR; - - static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void) - { -@@ -142,6 +150,7 @@ static inline S3C2410_SDI * const S3C241 - return (S3C2410_SDI * const)S3C2410_SDI_BASE; - } - -+#endif - - /* ISR */ - #define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0)) -diff --git a/include/s3c24x0.h b/include/s3c24x0.h -index 71f35a5..557b91f 100644 ---- a/include/s3c24x0.h -+++ b/include/s3c24x0.h -@@ -637,13 +637,7 @@ typedef struct { - S3C24X0_REG32 SDIDCNT; - S3C24X0_REG32 SDIDSTA; - S3C24X0_REG32 SDIFSTA; --#ifdef __BIG_ENDIAN -- S3C24X0_REG8 res[3]; -- S3C24X0_REG8 SDIDAT; --#else -- S3C24X0_REG8 SDIDAT; -- S3C24X0_REG8 res[3]; --#endif -+ S3C24X0_REG32 SDIDAT; - S3C24X0_REG32 SDIIMSK; - } /*__attribute__((__packed__))*/ S3C2410_SDI; - -@@ -1123,11 +1117,7 @@ #define rSDIDatCon (*(volatile unsigned - #define rSDIDatCnt (*(volatile unsigned *)0x5A000030) - #define rSDIDatSta (*(volatile unsigned *)0x5A000034) - #define rSDIFSTA (*(volatile unsigned *)0x5A000038) --#ifdef __BIG_ENDIAN --#define rSDIDAT (*(volatile unsigned char *)0x5A00003F) --#else --#define rSDIDAT (*(volatile unsigned char *)0x5A00003C) --#endif -+#define rSDIDAT (*(volatile unsigned *)0x5A00003C) - #define rSDIIntMsk (*(volatile unsigned *)0x5A000040) - - #endif diff --git a/packages/uboot/files/u-boot-20060907-gta01.patch b/packages/uboot/files/u-boot-20060907-gta01.patch deleted file mode 100644 index 6aa54fa208..0000000000 --- a/packages/uboot/files/u-boot-20060907-gta01.patch +++ /dev/null @@ -1,901 +0,0 @@ -diff --exclude .git -Nru u-boot/Makefile u-boot.new/Makefile ---- u-boot/Makefile 2006-08-11 23:19:07.000000000 +0200 -+++ u-boot.new/Makefile 2006-10-26 13:02:41.000000000 +0200 -@@ -1641,6 +1641,9 @@ - qt2410_config : unconfig - @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 - -+gta01_config : unconfig -+ @./mkconfig $(@:_config=) arm arm920t gta01 NULL s3c24x0 -+ - scb9328_config : unconfig - @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx - -diff --exclude .git -Nru u-boot/board/gta01/Makefile u-boot.new/board/gta01/Makefile ---- u-boot/board/gta01/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot.new/board/gta01/Makefile 2006-10-25 17:21:44.000000000 +0200 -@@ -0,0 +1,47 @@ -+# -+# (C) Copyright 2000, 2001, 2002 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = lib$(BOARD).a -+ -+OBJS := gta01.o -+SOBJS := lowlevel_init.o -+ -+$(LIB): $(OBJS) $(SOBJS) -+ $(AR) crv $@ $(OBJS) $(SOBJS) -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) -+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -+ -+-include .depend -+ -+######################################################################### -diff --exclude .git -Nru u-boot/board/gta01/config.mk u-boot.new/board/gta01/config.mk ---- u-boot/board/gta01/config.mk 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot.new/board/gta01/config.mk 2006-10-25 17:22:09.000000000 +0200 -@@ -0,0 +1,25 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# FIC GTA01 board with S3C2410X (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+# -+# GTA01 has 1 bank of 64 MB DRAM -+# -+# 3000'0000 to 3400'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# we load ourself to 33F8'0000 -+# -+# download area is 3300'0000 -+# -+ -+ -+TEXT_BASE = 0x33F80000 -diff --exclude .git -Nru u-boot/board/gta01/gta01.c u-boot.new/board/gta01/gta01.c ---- u-boot/board/gta01/gta01.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot.new/board/gta01/gta01.c 2006-10-25 17:27:50.000000000 +0200 -@@ -0,0 +1,133 @@ -+/* -+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * based on existing S3C2410 startup code in u-boot: -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2410.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#if 1 -+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */ -+//#define M_PDIV 0x3 -+//#define M_SDIV 0x1 -+#define M_MDIV 0x90 /* Fout = 202.8MHz */ -+#define M_PDIV 0x7 -+#define M_SDIV 0x0 -+#else -+#define M_MDIV 0x5c /* Fout = 150.0MHz */ -+#define M_PDIV 0x4 -+#define M_SDIV 0x0 -+#endif -+ -+#if 1 -+#define U_M_MDIV 0x78 -+#define U_M_PDIV 0x2 -+#define U_M_SDIV 0x3 -+#else -+#define U_M_MDIV 0x48 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x007FFFFF; -+ -+ gpio->GPBCON = 0x00005056; -+ gpio->GPBUP = 0x000007FF; -+ -+ gpio->GPCCON = 0xAAAA12A8; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x00002AA9; -+ gpio->GPFUP = 0x000000FF; -+ -+ gpio->GPGCON = 0xA846F0C0; -+ gpio->GPGUP = 0x0000AFEF; -+ -+ gpio->GPHCON = 0x0008FAAA; -+ gpio->GPHUP = 0x000007FF; -+ -+ /* arch number of SMDK2410-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_GTA01; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -diff --exclude .git -Nru u-boot/board/gta01/lowlevel_init.S u-boot.new/board/gta01/lowlevel_init.S ---- u-boot/board/gta01/lowlevel_init.S 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot.new/board/gta01/lowlevel_init.S 2006-10-25 17:20:42.000000000 +0200 -@@ -0,0 +1,171 @@ -+/* -+ * Memory Setup stuff - taken from blob memsetup.S -+ * -+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and -+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) -+ * -+ * Modified for the FIC GTA01 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 -+#define B6_SCAN 0x1 /* 9bit */ -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x1 /* 9bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x1 /* 3clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ ldr r0, =SMRDATA -+ ldr r1, _TEXT_BASE -+ sub r0, r0, r1 -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* setup asynchronous bus mode */ -+ mrc p15, 0, r1 ,c1 ,c0, 0 -+ orr r1, r1, #0xc0000000 -+ mcr p15, 0, r1, c1, c0, 0 -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0xb2 -+ .word 0x30 -+ .word 0x30 -diff --exclude .git -Nru u-boot/board/gta01/u-boot.lds u-boot.new/board/gta01/u-boot.lds ---- u-boot/board/gta01/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot.new/board/gta01/u-boot.lds 2006-10-25 17:28:02.000000000 +0200 -@@ -0,0 +1,57 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -diff --exclude .git -Nru u-boot/board/qt2410/qt2410.c.old u-boot.new/board/qt2410/qt2410.c.old ---- u-boot/board/qt2410/qt2410.c.old 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot.new/board/qt2410/qt2410.c.old 2006-10-10 11:09:43.000000000 +0200 -@@ -0,0 +1,127 @@ -+/* -+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * based on existing S3C2410 startup code in u-boot: -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2410.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#if 1 -+#define M_MDIV 0xA1 /* Fout = 202.8MHz */ -+#define M_PDIV 0x3 -+#define M_SDIV 0x1 -+//#define M_MDIV 0x90 /* Fout = 202.8MHz */ -+//#define M_PDIV 0x7 -+//#define M_SDIV 0x0 -+#else -+#define M_MDIV 0x5c /* Fout = 150.0MHz */ -+#define M_PDIV 0x4 -+#define M_SDIV 0x0 -+#endif -+ -+#if 1 -+#define U_M_MDIV 0x78 -+#define U_M_PDIV 0x2 -+#define U_M_SDIV 0x3 -+#else -+#define U_M_MDIV 0x48 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x007FFFFF; -+ gpio->GPBCON = 0x00044555; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPCCON = 0xAAAAAAAA; -+ gpio->GPCUP = 0x0000FFFF; -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ gpio->GPFCON = 0x000055AA; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPGCON = 0xFF95FFBA; -+ //gpio->GPGUP = 0x0000FFFF; -+ gpio->GPGUP = 0x0000AFEF; -+ gpio->GPHCON = 0x0028FAAA; -+ gpio->GPHUP = 0x000007FF; -+ -+ /* arch number of SMDK2410-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_QT2410; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -diff --exclude .git -Nru u-boot/fs/cramfs/cramfs.c u-boot.new/fs/cramfs/cramfs.c ---- u-boot/fs/cramfs/cramfs.c 2006-07-14 12:41:02.000000000 +0200 -+++ u-boot.new/fs/cramfs/cramfs.c 2006-10-26 14:01:41.000000000 +0200 -@@ -27,7 +27,7 @@ - #include <common.h> - #include <malloc.h> - --#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) -+#if (CONFIG_COMMANDS & CFG_CMD_CRAMFS) - - #include <asm/byteorder.h> - #include <linux/stat.h> -@@ -343,5 +343,22 @@ - } - return 1; - } -- -+#else -+int cramfs_load (char *loadoffset, struct part_info *info, char *filename) -+{ -+ return -1; -+} -+int cramfs_ls (struct part_info *info, char *filename) -+{ -+ return 0; -+} -+int cramfs_info (struct part_info *info) -+{ -+ return 0; -+} -+int cramfs_check (struct part_info *info) -+{ -+ return 0; -+} - #endif /* CFG_FS_CRAMFS */ -+ -diff --exclude .git -Nru u-boot/include/asm-arm/mach-types.h u-boot.new/include/asm-arm/mach-types.h ---- u-boot/include/asm-arm/mach-types.h 2006-08-11 23:19:07.000000000 +0200 -+++ u-boot.new/include/asm-arm/mach-types.h 2006-10-25 23:55:00.000000000 +0200 -@@ -1038,6 +1038,7 @@ - #define MACH_TYPE_IXP465 1028 - #define MACH_TYPE_BALLOON3 1029 - #define MACH_TYPE_QT2410 1108 -+#define MACH_TYPE_GTA01 1182 - - #ifdef CONFIG_ARCH_EBSA110 - # ifdef machine_arch_type -@@ -13327,6 +13328,19 @@ - # define machine_is_qt2410() (0) - #endif - -+#ifdef CONFIG_MACH_GTA01 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GTA01 -+# endif -+# define machine_is_gta01() (machine_arch_type == MACH_TYPE_GTA01) -+#else -+# define machine_is_gta01() (0) -+#endif -+ -+ - /* - * These have not yet been registered - */ -diff --exclude .git -Nru u-boot/include/configs/gta01.h u-boot.new/include/configs/gta01.h ---- u-boot/include/configs/gta01.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot.new/include/configs/gta01.h 2006-10-26 20:21:30.000000000 +0200 -@@ -0,0 +1,233 @@ -+/* -+ * (C) Copyright 2006 Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * Configuation settings for the FIC GTA01 Linux GSM phone -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* we want to start u-boot directly from within NAND flash */ -+#define CONFIG_S3C2410_NAND_BOOT 1 -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */ -+//#define CONFIG_HWFLOW 1 -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS (\ -+ CFG_CMD_BDI | \ -+ CFG_CMD_LOADS | \ -+ CFG_CMD_LAODB | \ -+ CFG_CMD_IMI | \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_MEMORY | \ -+ CFG_CMD_ENV | \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_BOOTD | \ -+ CFG_CMD_CONSOLE | \ -+ CFG_CMD_ASKENV | \ -+ CFG_CMD_RUN | \ -+ CFG_CMD_ECHO | \ -+ CFG_CMD_I2C | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_IMMAP | \ -+ CFG_CMD_DATE | \ -+ CFG_CMD_AUTOSCRIPT | \ -+ CFG_CMD_BSP | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_MISC | \ -+ CFG_CMD_USB | \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_DIAG | \ -+ /* CFG_CMD_HWFLOW | */ \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_FAT | \ -+ CFG_CMD_EXT2 | \ -+ 0) -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" -+/*#define CONFIG_BOOTFILE "elinos-lart" */ -+#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 16 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x33000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+#define CONFIG_USB_OHCI 1 -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+#if 1 -+#define CFG_NO_FLASH 1 -+#else -+#define CFG_MAX_FLASH_SECT 1 -+#define CFG_MAX_FLASH_BANKS 1 -+#endif -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+/* EXT2 driver */ -+#define CONFIG_EXT2 1 -+ -+/* FAT driver in u-boot is broken currently */ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT 1 -+ -+/* JFFS2 driver */ -+#define CONFIG_JFFS2_NAND 1 -+#define CONFIG_JFFS2_NAND_DEV 0 -+#define CONFIG_JFFS2_NAND_OFF 0x634000 -+#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#endif -+ -+#define CONFIG_DRIVER_S3C24X0_I2C 1 -+#define CONFIG_HARD_I2C 1 -+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50707 data sheet */ -+#define CFG_I2C_SLAVE 0x7f -+ -+ -+#if 0 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#endif /* __CONFIG_H */ diff --git a/packages/uboot/files/u-boot-20061030-gta01bv2.patch b/packages/uboot/files/u-boot-20061030-gta01bv2.patch deleted file mode 100644 index 9e2d19338e..0000000000 --- a/packages/uboot/files/u-boot-20061030-gta01bv2.patch +++ /dev/null @@ -1,246 +0,0 @@ -This patch adds support for the GTA01Bv2 variant of the FIC GTA01 (Neo1973) phone - -Index: git/Makefile -=================================================================== ---- git.orig/Makefile 2007-01-04 12:22:12.000000000 +0100 -+++ git/Makefile 2007-01-04 12:22:16.000000000 +0100 -@@ -1918,6 +1918,7 @@ - - gta01_config \ - gta01v3_config \ -+gta01bv2_config \ - gta01v4_config : unconfig - @board/gta01/split_by_variant.sh $@ - -Index: git/board/gta01/gta01.c -=================================================================== ---- git.orig/board/gta01/gta01.c 2007-01-04 12:22:12.000000000 +0100 -+++ git/board/gta01/gta01.c 2007-01-04 12:22:16.000000000 +0100 -@@ -35,28 +35,29 @@ - - DECLARE_GLOBAL_DATA_PTR; - --#if 1 -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) - //#define M_MDIV 0xA1 /* Fout = 202.8MHz */ - //#define M_PDIV 0x3 - //#define M_SDIV 0x1 - #define M_MDIV 0x90 /* Fout = 202.8MHz */ - #define M_PDIV 0x7 - #define M_SDIV 0x0 --#else --#define M_MDIV 0x5c /* Fout = 150.0MHz */ --#define M_PDIV 0x4 -+#elif defined(CONFIG_ARCH_GTA01B_v2) -+#if 0 -+#define M_MDIV 0x7d /* Fout = 266MHz */ -+#define M_PDIV 0x1 -+#define M_SDIV 0x1 -+#endif -+#define M_MDIV 0x90 /* Fout = 202.8MHz */ -+#define M_PDIV 0x7 - #define M_SDIV 0x0 -+#else -+#error Please define GTA01 revision - #endif - --#if 1 - #define U_M_MDIV 0x78 - #define U_M_PDIV 0x2 - #define U_M_SDIV 0x3 --#else --#define U_M_MDIV 0x48 --#define U_M_PDIV 0x3 --#define U_M_SDIV 0x2 --#endif - - static inline void delay (unsigned long loops) - { -@@ -137,7 +138,31 @@ - - gpio->GPHCON = 0x0000FAAA; - gpio->GPHUP = 0x000007FF; -+#elif defined(CONFIG_ARCH_GTA01B_v2) -+ gpio->GPACON = 0x005E47FF; - -+ gpio->GPBCON = 0x00145416; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPBDAT |= 0x4; /* Set GBP2 to high (Flash power-up) */ -+ -+ gpio->GPCCON = 0xAAAA12A9; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xA02AAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x0000aa19; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */ -+ -+ gpio->GPGCON = 0xFF40F0C1; -+ gpio->GPGUP = 0x0000AFEF; -+ -+ gpio->GPHCON = 0x0000FAAA; -+ gpio->GPHUP = 0x000007FF; - #else - #error Please define GTA01 version - #endif -@@ -156,9 +181,11 @@ - - int board_late_init(void) - { -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) - const char mmc_power = 0x8f; -- /* enable D3REG 3.3V (SC/MMC power) */ -+ /* enable D2REG 3.3V (SC/MMC power) */ - i2c_write(0x08, 0x25, 1, &mmc_power, 1); -+#endif - return 0; - } - -@@ -176,5 +203,7 @@ - return 0x00000130; - #elif defined(CONFIG_ARCH_GTA01_v4) - return 0x00000140; -+#elif defined(CONFIG_ARCH_GTA01B_v2) -+ return 0x00000220; - #endif - } -Index: git/board/gta01/split_by_variant.sh -=================================================================== ---- git.orig/board/gta01/split_by_variant.sh 2007-01-04 12:22:12.000000000 +0100 -+++ git/board/gta01/split_by_variant.sh 2007-01-04 12:22:16.000000000 +0100 -@@ -15,16 +15,23 @@ - case "$1" in - gta01v4_config) - echo "#define CONFIG_ARCH_GTA01_v4" > ${obj}include/config.h -+ echo "GTA01_BIG_FLASH=n" > ${obj}board/gta01/config.tmp - ;; - - gta01v3_config) - echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h -+ echo "GTA01_BIG_FLASH=n" > ${obj}board/gta01/config.tmp - ;; - -+ gta01bv2_config) -+ echo "#define CONFIG_ARCH_GTA01B_v2" > ${obj}include/config.h -+ echo "GTA01_BIG_FLASH=y" > ${obj}board/gta01/config.tmp -+ ;; - - *) - echo "$0:: Unrecognised config - using gta01v3_config" - echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h -+ echo "GTA01_BIG_FLASH=n" > ${obj}board/gta01/config.tmp - ;; - - esac -Index: git/include/configs/gta01.h -=================================================================== ---- git.orig/include/configs/gta01.h 2007-01-04 12:22:12.000000000 +0100 -+++ git/include/configs/gta01.h 2007-01-04 12:22:16.000000000 +0100 -@@ -128,6 +128,8 @@ - #define CFG_PROMPT "GTA01v3 # " /* Monitor Command Prompt */ - #elif defined(CONFIG_ARCH_GTA01_v4) - #define CFG_PROMPT "GTA01v4 # " /* Monitor Command Prompt */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) -+#define CFG_PROMPT "GTA01Bv2 # " /* Monitor Command Prompt */ - #endif - #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ - #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -@@ -166,7 +168,13 @@ - */ - #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - #define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) - #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) -+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -+#else -+#error Please define GTA01 variant -+#endif - #define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ - - /*----------------------------------------------------------------------- -Index: git/board/gta01/lowlevel_init.S -=================================================================== ---- git.orig/board/gta01/lowlevel_init.S 2007-01-04 12:22:07.000000000 +0100 -+++ git/board/gta01/lowlevel_init.S 2007-01-04 12:22:16.000000000 +0100 -@@ -108,12 +108,16 @@ - #define B5_PMC 0x0 /* normal */ - - #define B6_MT 0x3 /* SDRAM */ --#define B6_Trcd 0x1 -+#define B6_Trcd 0x1 /* 3clk */ -+#if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) - #define B6_SCAN 0x1 /* 9bit */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) -+#define B6_SCAN 0x2 /* 10bit */ -+#endif - - #define B7_MT 0x3 /* SDRAM */ - #define B7_Trcd 0x1 /* 3clk */ --#define B7_SCAN 0x1 /* 9bit */ -+#define B7_SCAN 0x2 /* 10bit */ - - /* REFRESH parameter */ - #define REFEN 0x1 /* Refresh enable */ -@@ -149,6 +153,19 @@ - orr r1, r1, #0xc0000000 - mcr p15, 0, r1, c1, c0, 0 - -+#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) -+ /* switch on power for NAND */ -+ ldr r0, =0x56000010 /* GPBCON */ -+ ldr r1, [r0] -+ orr r1, r1, #0x10 -+ str r1, [r0] -+ -+ ldr r0, =0x56000014 /* GPBDAT */ -+ ldr r1, [r0] -+ orr r1, r1, #(1 <<2) -+ str r1, [r0] -+#endif -+ - /* everything is fine now */ - mov pc, lr - -Index: git/board/gta01/config.mk -=================================================================== ---- git.orig/board/gta01/config.mk 2007-01-04 12:22:07.000000000 +0100 -+++ git/board/gta01/config.mk 2007-01-04 12:22:16.000000000 +0100 -@@ -8,18 +8,26 @@ - # see http://www.samsung.com/ for more information on SAMSUNG - # - -+# GTA01v3 has 1 bank of 64 MB SDRAM -+# GTA01v4 has 1 bank of 64 MB SDRAM - # --# GTA01 has 1 bank of 64 MB DRAM -+# 3000'0000 to 3400'0000 -+# we load ourself to 33F8'0000 -+# -+# GTA01Bv2 or later has 1 bank of 128 MB SDRAM - # --# 3000'0000 to 3400'0000 -+# 3000'0000 to 3800'0000 -+# we load ourself to 37F8'0000 - # - # Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 - # optionally with a ramdisk at 3080'0000 - # --# we load ourself to 33F8'0000 --# --# download area is 3300'0000 --# -+# download area is 3200'0000 or 3300'0000 - -+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -+ifeq ($(GTA01_BIG_RAM),y) -+TEXT_BASE = 0x37F80000 -+else - TEXT_BASE = 0x33F80000 -+endif diff --git a/packages/uboot/files/u-boot-20061030-gta01v4.patch b/packages/uboot/files/u-boot-20061030-gta01v4.patch deleted file mode 100644 index 8910dcf831..0000000000 --- a/packages/uboot/files/u-boot-20061030-gta01v4.patch +++ /dev/null @@ -1,132 +0,0 @@ -Index: git/Makefile -=================================================================== ---- git.orig/Makefile 2007-01-04 12:22:08.000000000 +0100 -+++ git/Makefile 2007-01-04 12:22:12.000000000 +0100 -@@ -1916,8 +1916,10 @@ - qt2410_config : unconfig - @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 - --gta01_config : unconfig -- @./mkconfig $(@:_config=) arm arm920t gta01 NULL s3c24x0 -+gta01_config \ -+gta01v3_config \ -+gta01v4_config : unconfig -+ @board/gta01/split_by_variant.sh $@ - - scb9328_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx -Index: git/board/gta01/gta01.c -=================================================================== ---- git.orig/board/gta01/gta01.c 2007-01-04 12:22:08.000000000 +0100 -+++ git/board/gta01/gta01.c 2007-01-04 12:22:12.000000000 +0100 -@@ -90,6 +90,7 @@ - delay (8000); - - /* set up the I/O ports */ -+#if defined(CONFIG_ARCH_GTA01_v3) - gpio->GPACON = 0x007FFFFF; - - gpio->GPBCON = 0x00005056; -@@ -112,6 +113,34 @@ - - gpio->GPHCON = 0x0008FAAA; - gpio->GPHUP = 0x000007FF; -+#elif defined(CONFIG_ARCH_GTA01_v4) -+ gpio->GPACON = 0x007FFFFF; //0x005E47FF; -+ -+ gpio->GPBDAT |= 0x4; /* Set GBP2 to high (Flash power-up) */ -+ gpio->GPBCON = 0x00005056; //0x00045016; -+ gpio->GPBUP = 0x000007FF; -+ -+ gpio->GPCCON = 0xAAAA12A9; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xA02AAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x0000aa09; -+ gpio->GPFUP = 0x000000FF; -+ -+ gpio->GPGCON = 0xFF40F0C1; -+ gpio->GPGUP = 0x0000FFFF; -+ -+ gpio->GPHCON = 0x0000FAAA; -+ gpio->GPHUP = 0x000007FF; -+ -+#else -+#error Please define GTA01 version -+#endif - - /* arch number of SMDK2410-Board */ - gd->bd->bi_arch_number = MACH_TYPE_GTA01; -@@ -143,5 +172,9 @@ - - u_int32_t get_board_rev(void) - { -+#if defined(CONFIG_ARCH_GTA01_v3) - return 0x00000130; -+#elif defined(CONFIG_ARCH_GTA01_v4) -+ return 0x00000140; -+#endif - } -Index: git/board/gta01/split_by_variant.sh -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/gta01/split_by_variant.sh 2007-01-04 12:22:12.000000000 +0100 -@@ -0,0 +1,36 @@ -+#!/bin/sh -+# --------------------------------------------------------- -+# Set the core module defines according to Core Module -+# --------------------------------------------------------- -+# --------------------------------------------------------- -+# Set up the GTA01 type define -+# --------------------------------------------------------- -+ -+mkdir -p ${obj}include -+if [ "$1" == "" ] -+then -+ echo "$0:: No parameters - using GTA01v3 config" -+ echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h -+else -+ case "$1" in -+ gta01v4_config) -+ echo "#define CONFIG_ARCH_GTA01_v4" > ${obj}include/config.h -+ ;; -+ -+ gta01v3_config) -+ echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h -+ ;; -+ -+ -+ *) -+ echo "$0:: Unrecognised config - using gta01v3_config" -+ echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h -+ ;; -+ -+ esac -+ -+fi -+# --------------------------------------------------------- -+# Complete the configuration -+# --------------------------------------------------------- -+$MKCONFIG -a gta01 arm arm920t gta01 NULL s3c24x0 -Index: git/include/configs/gta01.h -=================================================================== ---- git.orig/include/configs/gta01.h 2007-01-04 12:22:08.000000000 +0100 -+++ git/include/configs/gta01.h 2007-01-04 12:22:12.000000000 +0100 -@@ -124,7 +124,11 @@ - * Miscellaneous configurable options - */ - #define CFG_LONGHELP /* undef to save memory */ --#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */ -+#if defined(CONFIG_ARCH_GTA01_v3) -+#define CFG_PROMPT "GTA01v3 # " /* Monitor Command Prompt */ -+#elif defined(CONFIG_ARCH_GTA01_v4) -+#define CFG_PROMPT "GTA01v4 # " /* Monitor Command Prompt */ -+#endif - #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ - #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ - #define CFG_MAXARGS 16 /* max number of command args */ diff --git a/packages/uboot/files/u-boot-20061030-qt2410-gta01.patch b/packages/uboot/files/u-boot-20061030-qt2410-gta01.patch deleted file mode 100644 index 91f85479bc..0000000000 --- a/packages/uboot/files/u-boot-20061030-qt2410-gta01.patch +++ /dev/null @@ -1,9272 +0,0 @@ -Index: git/Makefile -=================================================================== ---- git.orig/Makefile 2007-01-04 12:21:15.000000000 +0100 -+++ git/Makefile 2007-01-04 12:21:18.000000000 +0100 -@@ -1913,6 +1913,12 @@ - sbc2410x_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 - -+qt2410_config : unconfig -+ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 -+ -+gta01_config : unconfig -+ @./mkconfig $(@:_config=) arm arm920t gta01 NULL s3c24x0 -+ - scb9328_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx - -Index: git/board/gta01/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/gta01/Makefile 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,47 @@ -+# -+# (C) Copyright 2000, 2001, 2002 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = lib$(BOARD).a -+ -+OBJS := gta01.o -+SOBJS := lowlevel_init.o -+ -+$(LIB): $(OBJS) $(SOBJS) -+ $(AR) crv $@ $(OBJS) $(SOBJS) -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) -+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -+ -+-include .depend -+ -+######################################################################### -Index: git/board/gta01/config.mk -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/gta01/config.mk 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,25 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# FIC GTA01 board with S3C2410X (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+# -+# GTA01 has 1 bank of 64 MB DRAM -+# -+# 3000'0000 to 3400'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# we load ourself to 33F8'0000 -+# -+# download area is 3300'0000 -+# -+ -+ -+TEXT_BASE = 0x33F80000 -Index: git/board/gta01/gta01.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/gta01/gta01.c 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,147 @@ -+/* -+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * based on existing S3C2410 startup code in u-boot: -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2410.h> -+#include <i2c.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#if 1 -+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */ -+//#define M_PDIV 0x3 -+//#define M_SDIV 0x1 -+#define M_MDIV 0x90 /* Fout = 202.8MHz */ -+#define M_PDIV 0x7 -+#define M_SDIV 0x0 -+#else -+#define M_MDIV 0x5c /* Fout = 150.0MHz */ -+#define M_PDIV 0x4 -+#define M_SDIV 0x0 -+#endif -+ -+#if 1 -+#define U_M_MDIV 0x78 -+#define U_M_PDIV 0x2 -+#define U_M_SDIV 0x3 -+#else -+#define U_M_MDIV 0x48 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x007FFFFF; -+ -+ gpio->GPBCON = 0x00005056; -+ gpio->GPBUP = 0x000007FF; -+ -+ gpio->GPCCON = 0xAAAA12A8; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x00002AA9; -+ gpio->GPFUP = 0x000000FF; -+ -+ gpio->GPGCON = 0xA846F0C0; -+ gpio->GPGUP = 0x0000AFEF; -+ -+ gpio->GPHCON = 0x0008FAAA; -+ gpio->GPHUP = 0x000007FF; -+ -+ /* arch number of SMDK2410-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_GTA01; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int board_late_init(void) -+{ -+ const char mmc_power = 0x8f; -+ /* enable D3REG 3.3V (SC/MMC power) */ -+ i2c_write(0x08, 0x25, 1, &mmc_power, 1); -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -+ -+u_int32_t get_board_rev(void) -+{ -+ return 0x00000130; -+} -Index: git/board/gta01/lowlevel_init.S -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/gta01/lowlevel_init.S 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,171 @@ -+/* -+ * Memory Setup stuff - taken from blob memsetup.S -+ * -+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and -+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) -+ * -+ * Modified for the FIC GTA01 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 -+#define B6_SCAN 0x1 /* 9bit */ -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x1 /* 9bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x1 /* 3clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ ldr r0, =SMRDATA -+ ldr r1, _TEXT_BASE -+ sub r0, r0, r1 -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* setup asynchronous bus mode */ -+ mrc p15, 0, r1 ,c1 ,c0, 0 -+ orr r1, r1, #0xc0000000 -+ mcr p15, 0, r1, c1, c0, 0 -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0xb2 -+ .word 0x30 -+ .word 0x30 -Index: git/board/gta01/u-boot.lds -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/gta01/u-boot.lds 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,57 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: git/board/qt2410/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/qt2410/Makefile 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,47 @@ -+# -+# (C) Copyright 2000, 2001, 2002 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = lib$(BOARD).a -+ -+OBJS := qt2410.o flash.o -+SOBJS := lowlevel_init.o -+ -+$(LIB): $(OBJS) $(SOBJS) -+ $(AR) crv $@ $(OBJS) $(SOBJS) -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) -+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -+ -+-include .depend -+ -+######################################################################### -Index: git/board/qt2410/config.mk -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/qt2410/config.mk 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,25 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+# -+# SMDK2410 has 1 bank of 64 MB DRAM -+# -+# 3000'0000 to 3400'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# we load ourself to 33F8'0000 -+# -+# download area is 3300'0000 -+# -+ -+ -+TEXT_BASE = 0x33F80000 -Index: git/board/qt2410/flash.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/qt2410/flash.c 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,435 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Alex Zuepke <azu@sysgo.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+ulong myflush (void); -+ -+ -+#define FLASH_BANK_SIZE PHYS_FLASH_SIZE -+#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ -+ -+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -+ -+ -+#define CMD_READ_ARRAY 0x000000F0 -+#define CMD_UNLOCK1 0x000000AA -+#define CMD_UNLOCK2 0x00000055 -+#define CMD_ERASE_SETUP 0x00000080 -+#define CMD_ERASE_CONFIRM 0x00000030 -+#define CMD_PROGRAM 0x000000A0 -+#define CMD_UNLOCK_BYPASS 0x00000020 -+ -+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) -+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) -+ -+#define BIT_ERASE_DONE 0x00000080 -+#define BIT_RDY_MASK 0x00000080 -+#define BIT_PROGRAM_ERROR 0x00000020 -+#define BIT_TIMEOUT 0x80000000 /* our flag */ -+ -+#define READY 1 -+#define ERR 2 -+#define TMO 4 -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+ulong flash_init (void) -+{ -+ int i, j; -+ ulong size = 0; -+ -+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { -+ ulong flashbase = 0; -+ -+ flash_info[i].flash_id = -+#if defined(CONFIG_AMD_LV400) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV400B & FLASH_TYPEMASK); -+#elif defined(CONFIG_AMD_LV800) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV800B & FLASH_TYPEMASK); -+#else -+#error "Unknown flash configured" -+#endif -+ flash_info[i].size = FLASH_BANK_SIZE; -+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; -+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); -+ if (i == 0) -+ flashbase = PHYS_FLASH_1; -+ else -+ panic ("configured too many flash banks!\n"); -+ for (j = 0; j < flash_info[i].sector_count; j++) { -+ if (j <= 3) { -+ /* 1st one is 16 KB */ -+ if (j == 0) { -+ flash_info[i].start[j] = -+ flashbase + 0; -+ } -+ -+ /* 2nd and 3rd are both 8 KB */ -+ if ((j == 1) || (j == 2)) { -+ flash_info[i].start[j] = -+ flashbase + 0x4000 + (j - -+ 1) * -+ 0x2000; -+ } -+ -+ /* 4th 32 KB */ -+ if (j == 3) { -+ flash_info[i].start[j] = -+ flashbase + 0x8000; -+ } -+ } else { -+ flash_info[i].start[j] = -+ flashbase + (j - 3) * MAIN_SECT_SIZE; -+ } -+ } -+ size += flash_info[i].size; -+ } -+ -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_FLASH_BASE, -+ CFG_FLASH_BASE + monitor_flash_len - 1, -+ &flash_info[0]); -+ -+#if 0 -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_ENV_ADDR, -+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); -+#endif -+ -+ return size; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+void flash_print_info (flash_info_t * info) -+{ -+ int i; -+ -+ switch (info->flash_id & FLASH_VENDMASK) { -+ case (AMD_MANUFACT & FLASH_VENDMASK): -+ printf ("AMD: "); -+ break; -+ default: -+ printf ("Unknown Vendor "); -+ break; -+ } -+ -+ switch (info->flash_id & FLASH_TYPEMASK) { -+ case (AMD_ID_LV400B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV400BB (4Mbit)\n"); -+ break; -+ case (AMD_ID_LV800B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV800BB (8Mbit)\n"); -+ break; -+ default: -+ printf ("Unknown Chip Type\n"); -+ goto Done; -+ break; -+ } -+ -+ printf (" Size: %ld MB in %d Sectors\n", -+ info->size >> 20, info->sector_count); -+ -+ printf (" Sector Start Addresses:"); -+ for (i = 0; i < info->sector_count; i++) { -+ if ((i % 5) == 0) { -+ printf ("\n "); -+ } -+ printf (" %08lX%s", info->start[i], -+ info->protect[i] ? " (RO)" : " "); -+ } -+ printf ("\n"); -+ -+ Done:; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+int flash_erase (flash_info_t * info, int s_first, int s_last) -+{ -+ ushort result; -+ int iflag, cflag, prot, sect; -+ int rc = ERR_OK; -+ int chip; -+ -+ /* first look for protection bits */ -+ -+ if (info->flash_id == FLASH_UNKNOWN) -+ return ERR_UNKNOWN_FLASH_TYPE; -+ -+ if ((s_first < 0) || (s_first > s_last)) { -+ return ERR_INVAL; -+ } -+ -+ if ((info->flash_id & FLASH_VENDMASK) != -+ (AMD_MANUFACT & FLASH_VENDMASK)) { -+ return ERR_UNKNOWN_FLASH_VENDOR; -+ } -+ -+ prot = 0; -+ for (sect = s_first; sect <= s_last; ++sect) { -+ if (info->protect[sect]) { -+ prot++; -+ } -+ } -+ if (prot) -+ return ERR_PROTECTED; -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ /* Start erase on unprotected sectors */ -+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { -+ printf ("Erasing sector %2d ... ", sect); -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ if (info->protect[sect] == 0) { /* not protected */ -+ vu_short *addr = (vu_short *) (info->start[sect]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ *addr = CMD_ERASE_CONFIRM; -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > -+ CFG_FLASH_ERASE_TOUT) { -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ chip = TMO; -+ break; -+ } -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_ERASE_DONE) -+ chip = READY; -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) -+ chip = ERR; -+ -+ } while (!chip); -+ -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ -+ if (chip == ERR) { -+ rc = ERR_PROG_ERROR; -+ goto outahere; -+ } -+ if (chip == TMO) { -+ rc = ERR_TIMOUT; -+ goto outahere; -+ } -+ -+ printf ("ok.\n"); -+ } else { /* it was protected */ -+ -+ printf ("protected!\n"); -+ } -+ } -+ -+ if (ctrlc ()) -+ printf ("User Interrupt!\n"); -+ -+ outahere: -+ /* allow flash to settle - wait 10 ms */ -+ udelay_masked (10000); -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash -+ */ -+ -+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) -+{ -+ vu_short *addr = (vu_short *) dest; -+ ushort result; -+ int rc = ERR_OK; -+ int cflag, iflag; -+ int chip; -+ -+ /* -+ * Check if Flash is (sufficiently) erased -+ */ -+ result = *addr; -+ if ((result & data) != data) -+ return ERR_NOT_ERASED; -+ -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; -+ *addr = CMD_PROGRAM; -+ *addr = data; -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { -+ chip = ERR | TMO; -+ break; -+ } -+ if (!chip && ((result & 0x80) == (data & 0x80))) -+ chip = READY; -+ -+ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { -+ result = *addr; -+ -+ if ((result & 0x80) == (data & 0x80)) -+ chip = READY; -+ else -+ chip = ERR; -+ } -+ -+ } while (!chip); -+ -+ *addr = CMD_READ_ARRAY; -+ -+ if (chip == ERR || *addr != data) -+ rc = ERR_PROG_ERROR; -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash. -+ */ -+ -+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -+{ -+ ulong cp, wp; -+ int l; -+ int i, rc; -+ ushort data; -+ -+ wp = (addr & ~1); /* get lower word aligned address */ -+ -+ /* -+ * handle unaligned start bytes -+ */ -+ if ((l = addr - wp) != 0) { -+ data = 0; -+ for (i = 0, cp = wp; i < l; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ for (; i < 2 && cnt > 0; ++i) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ ++cp; -+ } -+ for (; cnt == 0 && i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ wp += 2; -+ } -+ -+ /* -+ * handle word aligned part -+ */ -+ while (cnt >= 2) { -+ data = *((vu_short *) src); -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 2; -+ wp += 2; -+ cnt -= 2; -+ } -+ -+ if (cnt == 0) { -+ return ERR_OK; -+ } -+ -+ /* -+ * handle unaligned tail bytes -+ */ -+ data = 0; -+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ } -+ for (; i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ return write_hword (info, wp, data); -+} -Index: git/board/qt2410/lowlevel_init.S -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/qt2410/lowlevel_init.S 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,173 @@ -+/* -+ * Memory Setup stuff - taken from blob memsetup.S -+ * -+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and -+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) -+ * -+ * Modified for the Samsung SMDK2410 by -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 -+#define B6_SCAN 0x1 /* 9bit */ -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x1 /* 9bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x1 /* 3clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ ldr r0, =SMRDATA -+ ldr r1, _TEXT_BASE -+ sub r0, r0, r1 -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* setup asynchronous bus mode */ -+ mrc p15, 0, r1 ,c1 ,c0, 0 -+ orr r1, r1, #0xc0000000 -+ mcr p15, 0, r1, c1, c0, 0 -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0xb2 -+ .word 0x30 -+ .word 0x30 -Index: git/board/qt2410/qt2410.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/qt2410/qt2410.c 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,127 @@ -+/* -+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * based on existing S3C2410 startup code in u-boot: -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2410.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#if 1 -+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */ -+//#define M_PDIV 0x3 -+//#define M_SDIV 0x1 -+#define M_MDIV 0x90 /* Fout = 202.8MHz */ -+#define M_PDIV 0x7 -+#define M_SDIV 0x0 -+#else -+#define M_MDIV 0x5c /* Fout = 150.0MHz */ -+#define M_PDIV 0x4 -+#define M_SDIV 0x0 -+#endif -+ -+#if 1 -+#define U_M_MDIV 0x78 -+#define U_M_PDIV 0x2 -+#define U_M_SDIV 0x3 -+#else -+#define U_M_MDIV 0x48 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x007FFFFF; -+ gpio->GPBCON = 0x00044555; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPCCON = 0xAAAAAAAA; -+ gpio->GPCUP = 0x0000FFFF; -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ gpio->GPFCON = 0x000055AA; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPGCON = 0xFF95FFBA; -+ //gpio->GPGUP = 0x0000FFFF; -+ gpio->GPGUP = 0x0000AFEF; -+ gpio->GPHCON = 0x0028FAAA; -+ gpio->GPHUP = 0x000007FF; -+ -+ /* arch number of SMDK2410-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_QT2410; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -Index: git/board/qt2410/u-boot.lds -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/board/qt2410/u-boot.lds 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,57 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: git/common/Makefile -=================================================================== ---- git.orig/common/Makefile 2007-01-04 12:21:15.000000000 +0100 -+++ git/common/Makefile 2007-01-04 12:21:18.000000000 +0100 -@@ -28,7 +28,7 @@ - AOBJS = - - COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ -- cmd_ace.o cmd_autoscript.o \ -+ cmd_ace.o cmd_arm920.o cmd_autoscript.o \ - cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \ - cmd_cache.o cmd_console.o \ - cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \ -Index: git/common/cmd_arm920.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/common/cmd_arm920.c 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,64 @@ -+/* -+ * (C) Copyright 2003 -+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * Boot support -+ */ -+#include <common.h> -+#include <command.h> -+#include <net.h> /* for print_IPaddr */ -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#if (CONFIG_COMMANDS & CFG_CMD_BDI) -+ -+extern unsigned long read_p15_c1(void); -+extern void write_p15_c1(unsigned long); -+ -+int do_arm920 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -+{ -+ int i; -+ -+ if (strcmp(argv[1], "cp15c1")) { -+ printf("Usage:\n%s\n", cmdtp->usage); -+ return 1; -+ } -+ -+ if (!strcmp(argv[2], "write")) { -+ ulong val = simple_strtoul(argv[3], NULL, 16); -+ printf("setting cp15c1 to 0x%08x\n", val); -+ write_p15_c1(val); -+ } else if (!strcmp(argv[2], "read")) -+ printf("cp15c1 = 0x%08x\n", read_p15_c1()); -+ -+ return 0; -+} -+ -+/* -------------------------------------------------------------------- */ -+ -+U_BOOT_CMD( -+ arm920, 4, 1, do_arm920, -+ "arm920_cp15 - print cp15", -+ NULL -+); -+#endif /* CFG_CMD_BDI */ -Index: git/cpu/arm920t/cpu.c -=================================================================== ---- git.orig/cpu/arm920t/cpu.c 2007-01-04 12:21:15.000000000 +0100 -+++ git/cpu/arm920t/cpu.c 2007-01-04 12:21:18.000000000 +0100 -@@ -38,7 +38,7 @@ - #endif - - /* read co-processor 15, register #1 (control register) */ --static unsigned long read_p15_c1 (void) -+unsigned long read_p15_c1 (void) - { - unsigned long value; - -@@ -55,7 +55,7 @@ - } - - /* write to co-processor 15, register #1 (control register) */ --static void write_p15_c1 (unsigned long value) -+void write_p15_c1 (unsigned long value) - { - #ifdef MMU_DEBUG - printf ("write %08lx to p15/c1\n", value); -Index: git/cpu/arm920t/s3c24x0/Makefile -=================================================================== ---- git.orig/cpu/arm920t/s3c24x0/Makefile 2007-01-04 12:21:15.000000000 +0100 -+++ git/cpu/arm920t/s3c24x0/Makefile 2007-01-04 12:21:18.000000000 +0100 -@@ -26,7 +26,7 @@ - LIB = $(obj)lib$(SOC).a - - COBJS = i2c.o interrupts.o serial.o speed.o \ -- usb_ohci.o -+ usb_ohci.o mmc.o nand_read.o nand.o - - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) - OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -Index: git/cpu/arm920t/s3c24x0/mmc.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/cpu/arm920t/s3c24x0/mmc.c 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,568 @@ -+/* -+ * u-boot S3C2410 MMC/SD card driver -+ * (C) Copyright 2006 by Harald Welte <laforge@gnumonks.org> -+ * -+ * based on u-boot pxa MMC driver and linux/drivers/mmc/s3c2410mci.c -+ * (C) 2005-2005 Thomas Kleffel -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <config.h> -+#include <common.h> -+#include <mmc.h> -+#include <asm/errno.h> -+#include <asm/io.h> -+#include <s3c2410.h> -+#include <part.h> -+ -+#ifdef CONFIG_MMC -+ -+#define CONFIG_MMC_WIDE -+ -+//#define MMC_DEBUG -+ -+#ifdef MMC_DEBUG -+#ifdef debug -+#undef debug -+#endif -+#define debug printf -+#endif -+ -+static S3C2410_SDI *sdi; -+ -+extern int -+fat_register_device(block_dev_desc_t *dev_desc, int part_no); -+ -+static block_dev_desc_t mmc_dev; -+ -+block_dev_desc_t * mmc_get_dev(int dev) -+{ -+ return ((block_dev_desc_t *)&mmc_dev); -+} -+ -+/* -+ * FIXME needs to read cid and csd info to determine block size -+ * and other parameters -+ */ -+static uchar mmc_buf[MMC_BLOCK_SIZE]; -+static mmc_csd_t mmc_csd; -+static int mmc_ready = 0; -+static int wide = 0; -+ -+ -+#define CMD_F_RESP 0x01 -+#define CMD_F_RESP_LONG 0x02 -+ -+static u_int32_t * -+/****************************************************/ -+mmc_cmd(ushort cmd, ulong arg, ushort flags) -+/****************************************************/ -+{ -+ static u_int32_t resp[5]; -+ ulong status; -+ int i; -+ -+ u_int32_t ccon, csta; -+ u_int32_t csta_rdy_bit = S3C2410_SDICMDSTAT_CMDSENT; -+ -+ memset(resp, 0, sizeof(resp)); -+ -+ debug("mmc_cmd CMD%d arg=0x%08x flags=%x\n", cmd, arg, flags); -+ -+ sdi->SDICSTA = 0xffffffff; -+ sdi->SDIDSTA = 0xffffffff; -+ sdi->SDIFSTA = 0xffffffff; -+ -+ sdi->SDICARG = arg; -+ -+ ccon = cmd & S3C2410_SDICMDCON_INDEX; -+ ccon |= S3C2410_SDICMDCON_SENDERHOST|S3C2410_SDICMDCON_CMDSTART; -+ -+ if (flags & CMD_F_RESP) { -+ ccon |= S3C2410_SDICMDCON_WAITRSP; -+ csta_rdy_bit = S3C2410_SDICMDSTAT_RSPFIN; /* 1 << 9 */ -+ } -+ -+ if (flags & CMD_F_RESP_LONG) -+ ccon |= S3C2410_SDICMDCON_LONGRSP; -+ -+ sdi->SDICCON = ccon; -+ -+ while (1) { -+ csta = sdi->SDICSTA; -+ if (csta & csta_rdy_bit) -+ break; -+ if (csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { -+ printf("===============> MMC CMD Timeout\n"); -+ sdi->SDICSTA |= S3C2410_SDICMDSTAT_CMDTIMEOUT; -+ break; -+ } -+ } -+ -+ debug("final MMC CMD status 0x%x\n", csta); -+ -+ sdi->SDICSTA |= csta_rdy_bit; -+ -+ if (flags & CMD_F_RESP) { -+ resp[0] = sdi->SDIRSP0; -+ resp[1] = sdi->SDIRSP1; -+ resp[2] = sdi->SDIRSP2; -+ resp[3] = sdi->SDIRSP3; -+ } -+ -+#if 0 -+ for (i=0; i<4; i ++) { -+ debug("MMC resp[%d] = 0x%08x\n", i, resp[i]); -+ } -+#endif -+ -+ return resp; -+} -+ -+#define FIFO_FILL(host) ((host->SDIFSTA & S3C2410_SDIFSTA_COUNTMASK) >> 2) -+ -+static int -+/****************************************************/ -+mmc_block_read(uchar *dst, ulong src, ulong len) -+/****************************************************/ -+{ -+ u_int32_t dcon, fifo; -+ u_int32_t *dst_u32 = (u_int32_t *)dst; -+ u_int32_t *resp; -+ -+ if (len == 0) { -+ return 0; -+ } -+ -+ debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len); -+ -+ /* set block len */ -+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, len, CMD_F_RESP); -+ sdi->SDIBSIZE = len; -+ -+ //sdi->SDIPRE = 0xff; -+ -+ /* setup data */ -+ dcon = (len >> 9) & S3C2410_SDIDCON_BLKNUM_MASK; -+ dcon |= S3C2410_SDIDCON_BLOCKMODE; -+ dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART; -+ if (wide) -+ dcon |= S3C2410_SDIDCON_WIDEBUS; -+ sdi->SDIDCON = dcon; -+ -+ /* send read command */ -+ resp = mmc_cmd(MMC_CMD_READ_BLOCK, src, CMD_F_RESP); -+ -+ while (len > 0) { -+ u_int32_t sdidsta = sdi->SDIDSTA; -+ fifo = FIFO_FILL(sdi); -+ if (sdidsta & (S3C2410_SDIDSTA_FIFOFAIL| -+ S3C2410_SDIDSTA_CRCFAIL| -+ S3C2410_SDIDSTA_RXCRCFAIL| -+ S3C2410_SDIDSTA_DATATIMEOUT)) { -+ printf("mmc_block_read: err SDIDSTA=0x%08x\n", sdidsta); -+ return -EIO; -+ } -+ -+ while (fifo--) { -+ //debug("dst_u32 = 0x%08x\n", dst_u32); -+ *(dst_u32++) = sdi->SDIDAT; -+ if (len >= 4) -+ len -= 4; -+ else { -+ len = 0; -+ break; -+ } -+ } -+ } -+ -+#if 1 -+ debug("waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); -+ while (!(sdi->SDIDSTA & (1 << 4))) {} -+ debug("done waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); -+#endif -+ -+ sdi->SDIDCON = 0; -+ -+#if 0 -+ if (!(sdi->SDIDSTA & S3C2410_SDIDSTA_XFERFINISH)) -+ printf("mmc_block_read; transfer not finished!\n"); -+#endif -+ -+ return 0; -+} -+ -+static int -+/****************************************************/ -+mmc_block_write(ulong dst, uchar *src, int len) -+/****************************************************/ -+{ -+#if 0 -+ uchar *resp; -+ ushort argh, argl; -+ ulong status; -+ -+ if (len == 0) { -+ return 0; -+ } -+ -+ debug("mmc_block_wr dst %lx src %lx len %d\n", dst, (ulong)src, len); -+ -+ argh = len >> 16; -+ argl = len & 0xffff; -+ -+ /* set block len */ -+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, CMD_F_RESP); -+ -+ /* send write command */ -+ argh = dst >> 16; -+ argl = dst & 0xffff; -+ MMC_STRPCL = MMC_STRPCL_STOP_CLK; -+ MMC_NOB = 1; -+ MMC_BLKLEN = len; -+ resp = mmc_cmd(MMC_CMD_WRITE_BLOCK, dst, CMD_F_RESP, -+ MMC_CMDAT_R1|MMC_CMDAT_WRITE|MMC_CMDAT_BLOCK|MMC_CMDAT_DATA_EN); -+ -+ MMC_I_MASK = ~MMC_I_MASK_TXFIFO_WR_REQ; -+ while (len) { -+ if (MMC_I_REG & MMC_I_REG_TXFIFO_WR_REQ) { -+ int i, bytes = min(32,len); -+ -+ for (i=0; i<bytes; i++) { -+ MMC_TXFIFO = *src++; -+ } -+ if (bytes < 32) { -+ MMC_PRTBUF = MMC_PRTBUF_BUF_PART_FULL; -+ } -+ len -= bytes; -+ } -+ status = MMC_STAT; -+ if (status & MMC_STAT_ERRORS) { -+ printf("MMC_STAT error %lx\n", status); -+ return -1; -+ } -+ } -+ MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE; -+ while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)); -+ MMC_I_MASK = ~MMC_I_MASK_PRG_DONE; -+ while (!(MMC_I_REG & MMC_I_REG_PRG_DONE)); -+ status = MMC_STAT; -+ if (status & MMC_STAT_ERRORS) { -+ printf("MMC_STAT error %lx\n", status); -+ return -1; -+ } -+#endif -+ return 0; -+} -+ -+ -+int -+/****************************************************/ -+mmc_read(ulong src, uchar *dst, int size) -+/****************************************************/ -+{ -+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end; -+ ulong mmc_block_size, mmc_block_address; -+ -+ if (size == 0) { -+ return 0; -+ } -+ -+ if (!mmc_ready) { -+ printf("Please initialize the MMC first\n"); -+ return -1; -+ } -+ -+ mmc_block_size = MMC_BLOCK_SIZE; -+ mmc_block_address = ~(mmc_block_size - 1); -+ -+ src -= CFG_MMC_BASE; -+ end = src + size; -+ part_start = ~mmc_block_address & src; -+ part_end = ~mmc_block_address & end; -+ aligned_start = mmc_block_address & src; -+ aligned_end = mmc_block_address & end; -+ -+ /* all block aligned accesses */ -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_start) { -+ part_len = mmc_block_size - part_start; -+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) { -+ return -1; -+ } -+ memcpy(dst, mmc_buf+part_start, part_len); -+ dst += part_len; -+ src += part_len; -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) { -+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) { -+ return -1; -+ } -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_end && src < end) { -+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) { -+ return -1; -+ } -+ memcpy(dst, mmc_buf, part_end); -+ } -+ return 0; -+} -+ -+int -+/****************************************************/ -+mmc_write(uchar *src, ulong dst, int size) -+/****************************************************/ -+{ -+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end; -+ ulong mmc_block_size, mmc_block_address; -+ -+ if (size == 0) { -+ return 0; -+ } -+ -+ if (!mmc_ready) { -+ printf("Please initialize the MMC first\n"); -+ return -1; -+ } -+ -+ mmc_block_size = MMC_BLOCK_SIZE; -+ mmc_block_address = ~(mmc_block_size - 1); -+ -+ dst -= CFG_MMC_BASE; -+ end = dst + size; -+ part_start = ~mmc_block_address & dst; -+ part_end = ~mmc_block_address & end; -+ aligned_start = mmc_block_address & dst; -+ aligned_end = mmc_block_address & end; -+ -+ /* all block aligned accesses */ -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_start) { -+ part_len = mmc_block_size - part_start; -+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) { -+ return -1; -+ } -+ memcpy(mmc_buf+part_start, src, part_len); -+ if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) { -+ return -1; -+ } -+ dst += part_len; -+ src += part_len; -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) { -+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) { -+ return -1; -+ } -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_end && dst < end) { -+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) { -+ return -1; -+ } -+ memcpy(mmc_buf, src, part_end); -+ if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) { -+ return -1; -+ } -+ } -+ return 0; -+} -+ -+ulong -+/****************************************************/ -+mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst) -+/****************************************************/ -+{ -+ int mmc_block_size = MMC_BLOCK_SIZE; -+ ulong src = blknr * mmc_block_size + CFG_MMC_BASE; -+ -+ mmc_read(src, (uchar *)dst, blkcnt*mmc_block_size); -+ return blkcnt; -+} -+ -+static u_int16_t rca = MMC_DEFAULT_RCA; -+ -+static u_int32_t mmc_size(const struct mmc_csd *csd) -+{ -+ u_int32_t block_len, mult, blocknr; -+ -+ block_len = csd->read_bl_len << 12; -+ mult = csd->c_size_mult1 << 8; -+ blocknr = (csd->c_size+1) * mult; -+ -+ return blocknr * block_len; -+} -+ -+int -+/****************************************************/ -+mmc_init(int verbose) -+/****************************************************/ -+{ -+ int retries, rc = -ENODEV; -+ int is_sd = 0; -+ u_int32_t *resp; -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ -+ sdi = S3C2410_GetBase_SDI(); -+ -+ debug("mmc_init(PCLK=%u)\n", get_PCLK()); -+ -+ clk_power->CLKCON |= (1 << 9); -+ -+ /* S3C2410 has some bug that prevents reliable operation at higher speed */ -+ //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ -+ sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ -+ sdi->SDIBSIZE = 512; -+ sdi->SDIDTIMER = 0xffff; -+ sdi->SDIIMSK = 0x0; -+ sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK; -+ udelay(125000); /* FIXME: 74 SDCLK cycles */ -+ -+ mmc_csd.c_size = 0; -+ -+ /* reset */ -+ retries = 10; -+ resp = mmc_cmd(MMC_CMD_RESET, 0, 0); -+ -+ printf("trying to detect SD Card...\n"); -+ while (retries--) { -+ int i; -+ udelay(100000); -+ resp = mmc_cmd(55, 0x00000000, CMD_F_RESP); -+ resp = mmc_cmd(41, 0x00300000, CMD_F_RESP); -+ -+ if (resp[0] & (1 << 31)) { -+ is_sd = 1; -+ break; -+ } -+ } -+ -+ if (retries == 0 && !is_sd) { -+ retries = 10; -+ printf("failed to detect SD Card, trying MMC\n"); -+ resp = mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ffc000, CMD_F_RESP); -+ while (retries-- && resp && !(resp[4] & 0x80)) { -+ debug("resp %x %x\n", resp[0], resp[1]); -+ udelay(50); -+ resp = mmc_cmd(1, 0x00ffff00, CMD_F_RESP); -+ } -+ } -+ -+ /* try to get card id */ -+ resp = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, CMD_F_RESP|CMD_F_RESP_LONG); -+ if (resp) { -+ /* TODO configure mmc driver depending on card attributes */ -+ mmc_cid_t *cid = (mmc_cid_t *)resp; -+ if (verbose) { -+ printf("MMC found. Card desciption is:\n"); -+ printf("Manufacturer ID = %02x%02x%02x\n", -+ cid->id[0], cid->id[1], cid->id[2]); -+ printf("HW/FW Revision = %x %x\n",cid->hwrev, cid->fwrev); -+ cid->hwrev = cid->fwrev = 0; /* null terminate string */ -+ printf("Product Name = %s\n",cid->name); -+ printf("Serial Number = %02x%02x%02x\n", -+ cid->sn[0], cid->sn[1], cid->sn[2]); -+ printf("Month = %d\n",cid->month); -+ printf("Year = %d\n",1997 + cid->year); -+ } -+ /* fill in device description */ -+ mmc_dev.if_type = IF_TYPE_MMC; -+ mmc_dev.part_type = PART_TYPE_DOS; -+ mmc_dev.dev = 0; -+ mmc_dev.lun = 0; -+ mmc_dev.type = 0; -+ /* FIXME fill in the correct size (is set to 32MByte) */ -+ mmc_dev.blksz = 512; -+ mmc_dev.lba = 0x10000; -+ sprintf(mmc_dev.vendor,"Man %02x%02x%02x Snr %02x%02x%02x", -+ cid->id[0], cid->id[1], cid->id[2], -+ cid->sn[0], cid->sn[1], cid->sn[2]); -+ sprintf(mmc_dev.product,"%s",cid->name); -+ sprintf(mmc_dev.revision,"%x %x",cid->hwrev, cid->fwrev); -+ mmc_dev.removable = 0; -+ mmc_dev.block_read = mmc_bread; -+ -+ /* MMC exists, get CSD too */ -+ resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, CMD_F_RESP); -+ if (is_sd) -+ rca = resp[0] >> 16; -+ -+ resp = mmc_cmd(MMC_CMD_SEND_CSD, rca<<16, CMD_F_RESP|CMD_F_RESP_LONG); -+ if (resp) { -+ mmc_csd_t *csd = (mmc_csd_t *)resp; -+ memcpy(&mmc_csd, csd, sizeof(csd)); -+ rc = 0; -+ mmc_ready = 1; -+ /* FIXME add verbose printout for csd */ -+ printf("READ_BL_LEN=%u, C_SIZE_MULT=%u, C_SIZE=%u\n", -+ csd->read_bl_len, csd->c_size_mult1, csd->c_size); -+ printf("size = %u\n", mmc_size(csd)); -+ } -+ } -+ -+ resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca<<16, CMD_F_RESP); -+ -+#ifdef CONFIG_MMC_WIDE -+ if (is_sd) { -+ resp = mmc_cmd(55, rca<<16, CMD_F_RESP); -+ resp = mmc_cmd(6, 0x02, CMD_F_RESP); -+ wide = 1; -+ } -+#endif -+ -+ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */ -+ -+ return rc; -+} -+ -+int -+mmc_ident(block_dev_desc_t *dev) -+{ -+ return 0; -+} -+ -+int -+mmc2info(ulong addr) -+{ -+ /* FIXME hard codes to 32 MB device */ -+ if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) { -+ return 1; -+ } -+ return 0; -+} -+ -+#endif /* CONFIG_MMC */ -Index: git/cpu/arm920t/s3c24x0/nand.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/cpu/arm920t/s3c24x0/nand.c 2007-01-04 12:21:45.000000000 +0100 -@@ -0,0 +1,213 @@ -+/* -+ * (C) Copyright 2006 Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+#if 0 -+#define DEBUGN printf -+#else -+#define DEBUGN(x, args ...) {} -+#endif -+ -+#if (CONFIG_COMMANDS & CFG_CMD_NAND) -+#if !defined(CFG_NAND_LEGACY) -+ -+#include <nand.h> -+#include <s3c2410.h> -+ -+#define __REGb(x) (*(volatile unsigned char *)(x)) -+#define __REGi(x) (*(volatile unsigned int *)(x)) -+ -+#define NF_BASE 0x4e000000 -+#define NFCONF __REGi(NF_BASE + 0x0) -+#define NFCMD __REGb(NF_BASE + 0x4) -+#define NFADDR __REGb(NF_BASE + 0x8) -+#define NFDATA __REGb(NF_BASE + 0xc) -+#define NFSTAT __REGb(NF_BASE + 0x10) -+ -+#define S3C2410_NFCONF_EN (1<<15) -+#define S3C2410_NFCONF_512BYTE (1<<14) -+#define S3C2410_NFCONF_4STEP (1<<13) -+#define S3C2410_NFCONF_INITECC (1<<12) -+#define S3C2410_NFCONF_nFCE (1<<11) -+#define S3C2410_NFCONF_TACLS(x) ((x)<<8) -+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) -+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) -+ -+static u16 s3c2410_read_word(struct mtd_info *mtd) -+{ -+ unsigned char byte = 0; -+ -+ printf("s3c2410_read_word: WARNING, this function is not implemented yet\n"); -+ return byte; -+} -+ -+static void s3c2410_write_word(struct mtd_info *mtd, u16 word) -+{ -+ printf("s3c2410_write_word: WARNING, this function is not implemented yet\n"); -+} -+ -+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ DEBUGN("hwcontrol(): 0x%02x: ", cmd); -+ -+ switch (cmd) { -+ case NAND_CTL_SETNCE: -+ NFCONF &= ~S3C2410_NFCONF_nFCE; -+ DEBUGN("NFCONF=0x%08x\n", NFCONF); -+ break; -+ case NAND_CTL_CLRNCE: -+ NFCONF |= S3C2410_NFCONF_nFCE; -+ DEBUGN("NFCONF=0x%08x\n", NFCONF); -+ break; -+ case NAND_CTL_SETALE: -+ chip->IO_ADDR_W = NF_BASE + 0x8; -+ DEBUGN("SETALE\n"); -+ break; -+ case NAND_CTL_SETCLE: -+ chip->IO_ADDR_W = NF_BASE + 0x4; -+ DEBUGN("SETCLE\n"); -+ break; -+ default: -+ chip->IO_ADDR_W = NF_BASE + 0xc; -+ break; -+ } -+ return; -+} -+ -+static int s3c2410_dev_ready(struct mtd_info *mtd) -+{ -+ DEBUGN("dev_ready\n"); -+ return (NFSTAT & 0x01); -+} -+ -+static void s3c2410_cmdfunc(struct mtd_info *mtd, unsigned cmd, -+ int column, int page_addr) -+{ -+ DEBUGN("cmdfunc(): 0x%02x, col=%d, page=%d\n", cmd, column, page_addr); -+ -+ switch (cmd) { -+ case NAND_CMD_READ0: -+ case NAND_CMD_READ1: -+ case NAND_CMD_READOOB: -+ NFCMD = cmd; -+ NFADDR = column & 0xff; -+ NFADDR = page_addr & 0xff; -+ NFADDR = (page_addr >> 8) & 0xff; -+ NFADDR = (page_addr >> 16) & 0xff; -+ break; -+ case NAND_CMD_READID: -+ NFCMD = cmd; -+ NFADDR = 0; -+ break; -+ case NAND_CMD_PAGEPROG: -+ NFCMD = cmd; -+ printf("PAGEPROG not implemented\n"); -+ break; -+ case NAND_CMD_ERASE1: -+ NFCMD = cmd; -+ NFADDR = page_addr & 0xff; -+ NFADDR = (page_addr >> 8) & 0xff; -+ NFADDR = (page_addr >> 16) & 0xff; -+ break; -+ case NAND_CMD_ERASE2: -+ NFCMD = cmd; -+ break; -+ case NAND_CMD_SEQIN: -+ printf("SEQIN not implemented\n"); -+ break; -+ case NAND_CMD_STATUS: -+ NFCMD = cmd; -+ break; -+ case NAND_CMD_RESET: -+ NFCMD = cmd; -+ break; -+ default: -+ break; -+ } -+ -+ while (!s3c2410_dev_ready(mtd)); -+} -+ -+int board_nand_init(struct nand_chip *nand) -+{ -+ u_int32_t cfg; -+ u_int8_t tacls, twrph0, twrph1; -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ -+ DEBUGN("board_nand_init()\n"); -+ -+ clk_power->CLKCON |= (1 << 4); -+ -+ /* initialize hardware */ -+ twrph0 = 3; twrph1 = 0; tacls = 0; -+ -+ /* default timings: maximum */ -+ //twrph0 = 8; twrph1 = 8; tacls = 8; -+ -+ cfg = S3C2410_NFCONF_EN; -+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1); -+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); -+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); -+ -+ //NFCONF = cfg; -+ NFCONF = 0xf842; -+ -+ /* initialize nand_chip data structure */ -+ nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c; -+ -+ /* read_buf and write_buf are default */ -+ /* read_byte and write_byte are default */ -+ -+ /* need to override word read/write since default routines try 16bit wide -+ * register access of an (in our case) 8bit register */ -+ nand->read_word = s3c2410_read_word; -+ nand->write_word = s3c2410_write_word; -+ -+ /* hwcontrol always must be implemented */ -+ nand->hwcontrol = s3c2410_hwcontrol; -+ -+ nand->dev_ready = s3c2410_dev_ready; -+ -+ nand->eccmode = NAND_ECC_SOFT; -+ nand->options = 0; -+ //nand->waitfunc = dfc_wait; -+ -+ //nand->cmdfunc = s3c2410_cmdfunc; -+ //nand->autooob = &delta_oob; -+ //nand->badblock_pattern = &delta_bbt_descr; -+ -+#if 0 -+ /* reset */ -+ nand->hwcontrol(NULL, NAND_CTL_SETNCE); -+ nand->cmdfunc(NULL, NAND_CMD_RESET, -1, -1); -+ while (nand->dev_ready(NULL) == 0) {} -+ nand->hwcontrol(NULL, NAND_CTL_CLRNCE); -+#endif -+ -+ DEBUGN("end of nand_init\n"); -+ return 0; -+} -+ -+#else -+ #error "U-Boot legacy NAND support not available for S3C2410" -+#endif -+#endif -Index: git/cpu/arm920t/s3c24x0/nand_read.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/cpu/arm920t/s3c24x0/nand_read.c 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,75 @@ -+/* -+ * nand_read.c: Simple NAND read functions for booting from NAND -+ * -+ * Taken from GPLv2 licensed vivi bootloader, -+ * Copyright (C) 2002 MIZI Research, Inc. -+ * -+ * Author: Hwang, Chideok <hwang@mizi.com> -+ * Date : $Date: 2004/02/04 10:37:37 $ -+ * -+ * u-boot integration (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ */ -+ -+#include <common.h> -+ -+#ifdef CONFIG_S3C2410_NAND_BOOT -+ -+#define __REGb(x) (*(volatile unsigned char *)(x)) -+#define __REGi(x) (*(volatile unsigned int *)(x)) -+#define NF_BASE 0x4e000000 -+#define NFCONF __REGi(NF_BASE + 0x0) -+#define NFCMD __REGb(NF_BASE + 0x4) -+#define NFADDR __REGb(NF_BASE + 0x8) -+#define NFDATA __REGb(NF_BASE + 0xc) -+#define NFSTAT __REGb(NF_BASE + 0x10) -+ -+#define BUSY 1 -+inline void wait_idle(void) { -+ int i; -+ -+ while(!(NFSTAT & BUSY)) -+ for(i=0; i<10; i++); -+} -+ -+#define NAND_SECTOR_SIZE 512 -+#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1) -+ -+/* low level nand read function */ -+int -+nand_read_ll(unsigned char *buf, unsigned long start_addr, int size) -+{ -+ int i, j; -+ -+ if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) { -+ return -1; /* invalid alignment */ -+ } -+ -+ /* chip Enable */ -+ NFCONF &= ~0x800; -+ for(i=0; i<10; i++); -+ -+ for(i=start_addr; i < (start_addr + size);) { -+ /* READ0 */ -+ NFCMD = 0; -+ -+ /* Write Address */ -+ NFADDR = i & 0xff; -+ NFADDR = (i >> 9) & 0xff; -+ NFADDR = (i >> 17) & 0xff; -+ NFADDR = (i >> 25) & 0xff; -+ -+ wait_idle(); -+ -+ for(j=0; j < NAND_SECTOR_SIZE; j++, i++) { -+ *buf = (NFDATA & 0xff); -+ buf++; -+ } -+ } -+ -+ /* chip Disable */ -+ NFCONF |= 0x800; /* chip disable */ -+ -+ return 0; -+} -+ -+#endif /* CONFIG_S3C2410_NAND_BOOT */ -Index: git/cpu/arm920t/start.S -=================================================================== ---- git.orig/cpu/arm920t/start.S 2007-01-04 12:21:15.000000000 +0100 -+++ git/cpu/arm920t/start.S 2007-01-04 12:21:18.000000000 +0100 -@@ -5,6 +5,10 @@ - * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> - * Copyright (c) 2002 Gary Jennejohn <gj@denx.de> - * -+ * S3C2410 NAND portions -+ * Copyright (c) 2001 MIZI Research, Inc. -+ * Copyright (c) 2006 Harald Welte <hwelte@hmw-consulting.de> -+ * - * See file CREDITS for list of people who contributed to this - * project. - * -@@ -27,6 +31,7 @@ - - #include <config.h> - #include <version.h> -+#include <s3c2410.h> - - - /* -@@ -158,9 +163,17 @@ - */ - #ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -+#else -+ /* QT2410: configure bank 3 correctly to make ethernet work */ -+ ldr r1, =0x48000000 -+ ldr r2, =0x00001f4c -+ str r2, [r1, #0x10] -+ ldr r2, =0x2211d122 -+ str r2, [r1] - #endif - - #ifndef CONFIG_SKIP_RELOCATE_UBOOT -+#ifndef CONFIG_S3C2410_NAND_BOOT - relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ -@@ -177,6 +190,93 @@ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end addreee [r2] */ - ble copy_loop -+#else /* NAND_BOOT */ -+relocate: -+copy_myself: -+ /* mov r10, lr */ -+ -+ @ reset NAND -+ mov r1, #S3C2410_NAND_BASE -+ ldr r2, =0xf842 @ initial value enable tacls=3,rph0=6,rph1=0 -+ str r2, [r1, #oNFCONF] -+ ldr r2, [r1, #oNFCONF] -+ bic r2, r2, #0x800 @ enable chip -+ str r2, [r1, #oNFCONF] -+ mov r2, #0xff @ RESET command -+ strb r2, [r1, #oNFCMD] -+ mov r3, #0 @ wait -+1: add r3, r3, #0x1 -+ cmp r3, #0xa -+ blt 1b -+2: ldr r2, [r1, #oNFSTAT] @ wait ready -+ tst r2, #0x1 -+ beq 2b -+ ldr r2, [r1, #oNFCONF] -+ orr r2, r2, #0x800 @ disable chip -+ str r2, [r1, #oNFCONF] -+ -+#if 0 -+ @ get ready to call C functions (for nand_read()) -+ ldr sp, DW_STACK_START @ setup stack pointer -+ mov fp, #0 @ no previous frame, so fp=0 -+#else -+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ -+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ -+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ -+#ifdef CONFIG_USE_IRQ -+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -+#endif -+ sub sp, r0, #12 /* leave 3 words for abort-stack */ -+#endif -+ -+ @ copy u-boot to RAM -+ ldr r0, _TEXT_BASE -+ mov r1, #0x0 -+ mov r2, #0x30000 -+ bl nand_read_ll -+ -+ tst r0, #0x0 -+ beq ok_nand_read -+#ifdef CONFIG_DEBUG_LL -+bad_nand_read: -+ ldr r0, STR_FAIL -+ ldr r1, SerBase -+ bl PrintWord -+1: b 1b @ infinite loop -+#endif -+ -+ok_nand_read: -+#ifdef CONFIG_DEBUG_LL -+ ldr r0, STR_OK -+ ldr r1, SerBase -+ bl PrintWord -+#endif -+ -+ @ verify -+ mov r0, #0 -+ @ldr r1, =0x33f00000 -+ ldr r1, _TEXT_BASE -+ mov r2, #0x400 @ 4 bytes * 1024 = 4K-bytes -+go_next: -+ ldr r3, [r0], #4 -+ ldr r4, [r1], #4 -+ teq r3, r4 -+ bne notmatch -+ subs r2, r2, #4 -+ beq done_nand_read -+ bne go_next -+notmatch: -+#ifdef CONFIG_DEBUG_LL -+ sub r0, r0, #4 -+ ldr r1, SerBase -+ bl PrintHexWord -+ ldr r0, STR_FAIL -+ ldr r1, SerBase -+ bl PrintWord -+#endif -+1: b 1b -+done_nand_read: -+#endif /* NAND_BOOT */ - #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -Index: git/drivers/Makefile -=================================================================== ---- git.orig/drivers/Makefile 2007-01-04 12:21:15.000000000 +0100 -+++ git/drivers/Makefile 2007-01-04 12:21:18.000000000 +0100 -@@ -51,7 +51,7 @@ - ks8695eth.o \ - pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ - rpx_pcmcia.o \ -- fsl_i2c.o -+ fsl_i2c.o s3c2410_fb.o - - SRCS := $(COBJS:.o=.c) - OBJS := $(addprefix $(obj),$(COBJS)) -Index: git/drivers/cs8900.c -=================================================================== ---- git.orig/drivers/cs8900.c 2007-01-04 12:21:15.000000000 +0100 -+++ git/drivers/cs8900.c 2007-01-04 12:21:18.000000000 +0100 -@@ -120,6 +120,7 @@ - unsigned char env_enetaddr[6]; - char *tmp = getenv ("ethaddr"); - char *end; -+ unsigned short chip_id; - - for (i=0; i<6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; -@@ -128,7 +129,9 @@ - } - - /* verify chip id */ -- if (get_reg_init_bus (PP_ChipID) != 0x630e) -+ chip_id = get_reg_init_bus (PP_ChipID); -+ printf("\ncs8900a chipid 0x%04x\n", chip_id); -+ if (chip_id != 0x630e) - return; - eth_reset (); - if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) == -Index: git/drivers/s3c2410_fb.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/drivers/s3c2410_fb.c 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,182 @@ -+/* -+ * (C) Copyright 2006 Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+#if defined(CONFIG_VIDEO_S3C2410) -+ -+#include <video_fb.h> -+#include "videomodes.h" -+#include <s3c2410.h> -+/* -+ * Export Graphic Device -+ */ -+GraphicDevice smi; -+ -+#define VIDEO_MEM_SIZE 0x200000 -+ -+/******************************************************************************* -+ * -+ * Init video chip with common Linux graphic modes (lilo) -+ */ -+void *video_hw_init (void) -+{ -+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); -+ GraphicDevice *pGD = (GraphicDevice *)&smi; -+ int videomode; -+ unsigned long t1, hsynch, vsynch; -+ char *penv; -+ int tmp, i, bits_per_pixel; -+ struct ctfb_res_modes *res_mode; -+ struct ctfb_res_modes var_mode; -+ unsigned char videoout; -+ unsigned int *vm; -+ -+ /* Search for video chip */ -+ printf("Video: "); -+ -+ tmp = 0; -+ -+ videomode = CFG_DEFAULT_VIDEO_MODE; -+ /* get video mode via environment */ -+ if ((penv = getenv ("videomode")) != NULL) { -+ /* deceide if it is a string */ -+ if (penv[0] <= '9') { -+ videomode = (int) simple_strtoul (penv, NULL, 16); -+ tmp = 1; -+ } -+ } else { -+ tmp = 1; -+ } -+ if (tmp) { -+ /* parameter are vesa modes */ -+ /* search params */ -+ for (i = 0; i < VESA_MODES_COUNT; i++) { -+ if (vesa_modes[i].vesanr == videomode) -+ break; -+ } -+ if (i == VESA_MODES_COUNT) { -+ printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE); -+ i = 0; -+ } -+ res_mode = -+ (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i]. -+ resindex]; -+ bits_per_pixel = vesa_modes[i].bits_per_pixel; -+ } else { -+ -+ res_mode = (struct ctfb_res_modes *) &var_mode; -+ bits_per_pixel = video_get_params (res_mode, penv); -+ } -+ -+ /* calculate hsynch and vsynch freq (info only) */ -+ t1 = (res_mode->left_margin + res_mode->xres + -+ res_mode->right_margin + res_mode->hsync_len) / 8; -+ t1 *= 8; -+ t1 *= res_mode->pixclock; -+ t1 /= 1000; -+ hsynch = 1000000000L / t1; -+ t1 *= -+ (res_mode->upper_margin + res_mode->yres + -+ res_mode->lower_margin + res_mode->vsync_len); -+ t1 /= 1000; -+ vsynch = 1000000000L / t1; -+ -+ /* fill in Graphic device struct */ -+ sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres, -+ res_mode->yres, bits_per_pixel, (hsynch / 1000), -+ (vsynch / 1000)); -+ printf ("%s\n", pGD->modeIdent); -+ pGD->winSizeX = res_mode->xres; -+ pGD->winSizeY = res_mode->yres; -+ pGD->plnSizeX = res_mode->xres; -+ pGD->plnSizeY = res_mode->yres; -+ switch (bits_per_pixel) { -+ case 8: -+ pGD->gdfBytesPP = 1; -+ pGD->gdfIndex = GDF__8BIT_INDEX; -+ break; -+ case 15: -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_15BIT_555RGB; -+ break; -+ case 16: -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_16BIT_565RGB; -+ break; -+ case 24: -+ pGD->gdfBytesPP = 3; -+ pGD->gdfIndex = GDF_24BIT_888RGB; -+ break; -+ } -+ -+#if 0 -+ pGD->isaBase = CFG_ISA_IO; -+ pGD->pciBase = pci_mem_base; -+ pGD->dprBase = (pci_mem_base + 0x400000 + 0x8000); -+ pGD->vprBase = (pci_mem_base + 0x400000 + 0xc000); -+ pGD->cprBase = (pci_mem_base + 0x400000 + 0xe000); -+#endif -+ pGD->frameAdrs = LCD_VIDEO_ADDR; -+ pGD->memSize = VIDEO_MEM_SIZE; -+ -+ lcd->LCDSADDR1 = LCD_VIDEO_ADDR >> 1; -+ lcd->LCDSADDR2 = (LCD_VIDEO_ADDR + 0x4b000) >> 1; -+ lcd->LCDSADDR3 = 0x000000f0; -+ -+ lcd->LCDCON1 = 0x00000479; -+ lcd->LCDCON2 = 0x014fc183; -+ lcd->LCDCON3 = 0x0060ef07; -+ lcd->LCDCON4 = 0x00000003; -+ lcd->LCDCON5 = 0x00000b09; -+ lcd->LPCSEL = 0x00000cf0; -+ -+ pGD->winSizeX = pGD->plnSizeX = 240; -+ pGD->winSizeY = pGD->plnSizeY = 320; -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_16BIT_565RGB; -+ -+ /* Enable Display */ -+ videoout = 2; /* Default output is CRT */ -+ if ((penv = getenv ("videoout")) != NULL) { -+ /* deceide if it is a string */ -+ videoout = (int) simple_strtoul (penv, NULL, 16); -+ } -+ -+ printf("clearing video memory\n"); -+ /* Clear video memory */ -+ i = pGD->memSize/4; -+ vm = (unsigned int *)pGD->frameAdrs; -+ while(i--) -+ *vm++ = 0; -+ -+ printf("returning from video_hw_init\n"); -+ return ((void*)&smi); -+} -+ -+void -+video_set_lut (unsigned int index, /* color number */ -+ unsigned char r, /* red */ -+ unsigned char g, /* green */ -+ unsigned char b /* blue */ -+ ) -+{ -+} -+ -+#endif /* CONFIG_VIDEO_S3C2410 */ -Index: git/drivers/usbdcore_s3c2410.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/drivers/usbdcore_s3c2410.c 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,1609 @@ -+/* -+ * (C) Copyright 2003 -+ * Gerry Hamel, geh@ti.com, Texas Instruments -+ * -+ * Based on -+ * linux/drivers/usb/device/bi/omap.c -+ * TI OMAP1510 USB bus interface driver -+ * -+ * Author: MontaVista Software, Inc. -+ * source@mvista.com -+ * (C) Copyright 2002 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ */ -+ -+#include <common.h> -+ -+#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE) -+ -+#include <asm/io.h> -+ -+#include "usbdcore.h" -+#include "usbdcore_s3c2410.h" -+#include "usbdcore_ep0.h" -+ -+ -+#define UDC_INIT_MDELAY 80 /* Device settle delay */ -+#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */ -+ -+/* Some kind of debugging output... */ -+#if 1 -+#define UDCDBG(str) -+#define UDCDBGA(fmt,args...) -+#else /* The bugs still exists... */ -+#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__) -+#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args) -+#endif -+ -+#if 1 -+#define UDCREG(name) -+#define UDCREGL(name) -+#else /* The bugs still exists... */ -+#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */ -+#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */ -+#endif -+ -+ -+static struct urb *ep0_urb = NULL; -+ -+static struct usb_device_instance *udc_device; /* Used in interrupt handler */ -+static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */ -+static u32 udc_interrupts = 0; -+ -+static void udc_stall_ep (unsigned int ep_addr); -+ -+ -+static struct usb_endpoint_instance *s3c2410_find_ep (int ep) -+{ -+ int i; -+ -+ for (i = 0; i < udc_device->bus->max_endpoints; i++) { -+ if (udc_device->bus->endpoint_array[i].endpoint_address == ep) -+ return &udc_device->bus->endpoint_array[i]; -+ } -+ return NULL; -+} -+ -+/* ************************************************************************** */ -+/* IO -+ */ -+ -+/* -+ * omap1510_prepare_endpoint_for_rx -+ * -+ * This function implements TRM Figure 14-11. -+ * -+ * The endpoint to prepare for transfer is specified as a physical endpoint -+ * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint -+ * configuration register is checked to see if the endpoint is ISO or not. -+ * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled. -+ * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30. -+ */ -+static void omap1510_prepare_endpoint_for_rx (int ep_addr) -+{ -+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; -+ -+ UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr); -+ if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) { -+ if ((inw (UDC_EP_RX (ep_num)) & -+ (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) == -+ UDC_EPn_RX_Valid) { -+ /* rx endpoint is valid, non-ISO, so enable its FIFO */ -+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ outw (0, UDC_EP_NUM); -+ } -+ } -+} -+ -+/* omap1510_configure_endpoints -+ * -+ * This function implements TRM Figure 14-10. -+ */ -+static void omap1510_configure_endpoints (struct usb_device_instance *device) -+{ -+ int ep; -+ struct usb_bus_instance *bus; -+ struct usb_endpoint_instance *endpoint; -+ unsigned short ep_ptr; -+ unsigned short ep_size; -+ unsigned short ep_isoc; -+ unsigned short ep_doublebuffer; -+ int ep_addr; -+ int packet_size; -+ int buffer_size; -+ int attributes; -+ -+ bus = device->bus; -+ -+ /* There is a dedicated 2048 byte buffer for USB packets that may be -+ * arbitrarily partitioned among the endpoints on 8-byte boundaries. -+ * The first 8 bytes are reserved for receiving setup packets on -+ * endpoint 0. -+ */ -+ ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */ -+ -+ for (ep = 0; ep < bus->max_endpoints; ep++) { -+ endpoint = bus->endpoint_array + ep; -+ ep_addr = endpoint->endpoint_address; -+ if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ /* IN endpoint */ -+ packet_size = endpoint->tx_packetSize; -+ attributes = endpoint->tx_attributes; -+ } else { -+ /* OUT endpoint */ -+ packet_size = endpoint->rcv_packetSize; -+ attributes = endpoint->rcv_attributes; -+ } -+ -+ switch (packet_size) { -+ case 0: -+ ep_size = 0; -+ break; -+ case 8: -+ ep_size = 0; -+ break; -+ case 16: -+ ep_size = 1; -+ break; -+ case 32: -+ ep_size = 2; -+ break; -+ case 64: -+ ep_size = 3; -+ break; -+ case 128: -+ ep_size = 4; -+ break; -+ case 256: -+ ep_size = 5; -+ break; -+ case 512: -+ ep_size = 6; -+ break; -+ default: -+ UDCDBGA ("ep 0x%02x has bad packet size %d", -+ ep_addr, packet_size); -+ packet_size = 0; -+ ep_size = 0; -+ break; -+ } -+ -+ switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) { -+ case USB_ENDPOINT_XFER_CONTROL: -+ case USB_ENDPOINT_XFER_BULK: -+ case USB_ENDPOINT_XFER_INT: -+ default: -+ /* A non-isochronous endpoint may optionally be -+ * double-buffered. For now we disable -+ * double-buffering. -+ */ -+ ep_doublebuffer = 0; -+ ep_isoc = 0; -+ if (packet_size > 64) -+ packet_size = 0; -+ if (!ep || !ep_doublebuffer) -+ buffer_size = packet_size; -+ else -+ buffer_size = packet_size * 2; -+ break; -+ case USB_ENDPOINT_XFER_ISOC: -+ /* Isochronous endpoints are always double- -+ * buffered, but the double-buffering bit -+ * in the endpoint configuration register -+ * becomes the msb of the endpoint size so we -+ * set the double-buffering flag to zero. -+ */ -+ ep_doublebuffer = 0; -+ ep_isoc = 1; -+ buffer_size = packet_size * 2; -+ break; -+ } -+ -+ /* check to see if our packet buffer RAM is exhausted */ -+ if ((ep_ptr + buffer_size) > 2048) { -+ UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size); -+ buffer_size = packet_size = 0; -+ } -+ -+ /* force a default configuration for endpoint 0 since it is -+ * always enabled -+ */ -+ if (!ep && ((packet_size < 8) || (packet_size > 64))) { -+ buffer_size = packet_size = 64; -+ ep_size = 3; -+ } -+ -+ if (!ep) { -+ /* configure endpoint 0 */ -+ outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0); -+ /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */ -+ /* ep_ptr, packet_size); */ -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ /* IN endpoint */ -+ if (packet_size) { -+ outw ((1 << 15) | (ep_doublebuffer << 14) | -+ (ep_size << 12) | (ep_isoc << 11) | -+ (ep_ptr >> 3), -+ UDC_EP_TX (ep_addr & -+ USB_ENDPOINT_NUMBER_MASK)); -+ UDCDBGA ("IN ep %d buffer offset 0x%03x" -+ " packet size 0x%03x", -+ ep_addr & USB_ENDPOINT_NUMBER_MASK, -+ ep_ptr, packet_size); -+ } else { -+ outw (0, -+ UDC_EP_TX (ep_addr & -+ USB_ENDPOINT_NUMBER_MASK)); -+ } -+ } else { -+ /* OUT endpoint */ -+ if (packet_size) { -+ outw ((1 << 15) | (ep_doublebuffer << 14) | -+ (ep_size << 12) | (ep_isoc << 11) | -+ (ep_ptr >> 3), -+ UDC_EP_RX (ep_addr & -+ USB_ENDPOINT_NUMBER_MASK)); -+ UDCDBGA ("OUT ep %d buffer offset 0x%03x" -+ " packet size 0x%03x", -+ ep_addr & USB_ENDPOINT_NUMBER_MASK, -+ ep_ptr, packet_size); -+ } else { -+ outw (0, -+ UDC_EP_RX (ep_addr & -+ USB_ENDPOINT_NUMBER_MASK)); -+ } -+ } -+ ep_ptr += buffer_size; -+ } -+} -+ -+static void s3c2410_deconfigure_device (void) -+{ -+ int epnum; -+ -+ UDCDBG ("clear Cfg_Lock"); -+ outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1); -+ UDCREG (UDC_SYSCON1); -+ -+ /* deconfigure all endpoints */ -+ for (epnum = 1; epnum <= 15; epnum++) { -+ outw (0, UDC_EP_RX (epnum)); -+ outw (0, UDC_EP_TX (epnum)); -+ } -+} -+ -+static void s3c2410_configure_device (struct usb_device_instance *device) -+{ -+ u_int32_t tmp; -+ -+ s3c2410_configure_endpoints(device); -+ -+ /* disable EP0-4 SUBD interrupts ? */ -+ outw(0x00, S3C2410_UDC_USB_INT_EN_REG); -+ -+ /* UPLL already configured by board-level init code */ -+ -+ /* configure USB pads to device mode */ -+ tmp = inw(S3C2410_MISCCR); -+ tmp &= ~(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND1); -+ outw(tmp, S3C2410_MISCCR); -+ -+ tmp = inb(S3C2410_CLKSLOW); -+ tmp &= ~S3C2410_CLKSLOW_USB_CLK_DISABLE; -+ outw(tmp, S3C2410_CLKSLOW); -+ -+ /* clear interrupt registers */ -+ inb(S3C2410_UDC_EP_INT_REG); -+ inb(S3C2410_UDC_USB_INT_REG); -+ -+ /* enable USB interrupts for RESET and SUSPEND/RESUME */ -+ outb(S3C2410_UDC_USBINT_RESET|S3C2410_UDC_USBINT_SUSPEND, -+ S3C2410_UDC_USB_INT_EN_REG); -+ -+} -+ -+/* omap1510_write_noniso_tx_fifo -+ * -+ * This function implements TRM Figure 14-30. -+ * -+ * If the endpoint has an active tx_urb, then the next packet of data from the -+ * URB is written to the tx FIFO. The total amount of data in the urb is given -+ * by urb->actual_length. The maximum amount of data that can be sent in any -+ * one packet is given by endpoint->tx_packetSize. The number of data bytes -+ * from this URB that have already been transmitted is given by endpoint->sent. -+ * endpoint->last is updated by this routine with the number of data bytes -+ * transmitted in this packet. -+ * -+ * In accordance with Figure 14-30, the EP_NUM register must already have been -+ * written with the value to select the appropriate tx FIFO before this routine -+ * is called. -+ */ -+static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance -+ *endpoint) -+{ -+ struct urb *urb = endpoint->tx_urb; -+ -+ if (urb) { -+ unsigned int last, i; -+ -+ UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d", -+ urb->buffer, urb->buffer_length, urb->actual_length); -+ if ((last = -+ MIN (urb->actual_length - endpoint->sent, -+ endpoint->tx_packetSize))) { -+ u8 *cp = urb->buffer + endpoint->sent; -+ -+ UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); -+ -+ if (((u32) cp & 1) == 0) { /* word aligned? */ -+ outsw (UDC_DATA, cp, last >> 1); -+ } else { /* byte aligned. */ -+ for (i = 0; i < (last >> 1); i++) { -+ u16 w = ((u16) cp[2 * i + 1] << 8) | -+ (u16) cp[2 * i]; -+ outw (w, UDC_DATA); -+ } -+ } -+ if (last & 1) { -+ outb (*(cp + last - 1), UDC_DATA); -+ } -+ } -+ endpoint->last = last; -+ } -+} -+ -+/* omap1510_read_noniso_rx_fifo -+ * -+ * This function implements TRM Figure 14-28. -+ * -+ * If the endpoint has an active rcv_urb, then the next packet of data is read -+ * from the rcv FIFO and written to rcv_urb->buffer at offset -+ * rcv_urb->actual_length to append the packet data to the data from any -+ * previous packets for this transfer. We assume that there is sufficient room -+ * left in the buffer to hold an entire packet of data. -+ * -+ * The return value is the number of bytes read from the FIFO for this packet. -+ * -+ * In accordance with Figure 14-28, the EP_NUM register must already have been -+ * written with the value to select the appropriate rcv FIFO before this routine -+ * is called. -+ */ -+static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance -+ *endpoint) -+{ -+ struct urb *urb = endpoint->rcv_urb; -+ int len = 0; -+ -+ if (urb) { -+ len = inw (UDC_RXFSTAT); -+ -+ if (len) { -+ unsigned char *cp = urb->buffer + urb->actual_length; -+ -+ insw (UDC_DATA, cp, len >> 1); -+ if (len & 1) -+ *(cp + len - 1) = inb (UDC_DATA); -+ } -+ } -+ return len; -+} -+ -+/* omap1510_prepare_for_control_write_status -+ * -+ * This function implements TRM Figure 14-17. -+ * -+ * We have to deal here with non-autodecoded control writes that haven't already -+ * been dealt with by ep0_recv_setup. The non-autodecoded standard control -+ * write requests are: set/clear endpoint feature, set configuration, set -+ * interface, and set descriptor. ep0_recv_setup handles set/clear requests for -+ * ENDPOINT_HALT by halting the endpoint for a set request and resetting the -+ * endpoint for a clear request. ep0_recv_setup returns an error for -+ * SET_DESCRIPTOR requests which causes them to be terminated with a stall by -+ * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by -+ * generating a DEVICE_SET_INTERFACE event. This leaves only the -+ * SET_CONFIGURATION event for us to deal with here. -+ * -+ */ -+static void omap1510_prepare_for_control_write_status (struct urb *urb) -+{ -+ struct usb_device_request *request = &urb->device_request;; -+ -+ /* check for a SET_CONFIGURATION request */ -+ if (request->bRequest == USB_REQ_SET_CONFIGURATION) { -+ int configuration = le16_to_cpu (request->wValue) & 0xff; -+ unsigned short devstat = inw (UDC_DEVSTAT); -+ -+ if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) { -+ /* device is currently in ADDRESSED state */ -+ if (configuration) { -+ /* Assume the specified non-zero configuration -+ * value is valid and switch to the CONFIGURED -+ * state. -+ */ -+ outw (UDC_Dev_Cfg, UDC_SYSCON2); -+ } -+ } else if ((devstat & UDC_CFG) == UDC_CFG) { -+ /* device is currently in CONFIGURED state */ -+ if (!configuration) { -+ /* Switch to ADDRESSED state. */ -+ outw (UDC_Clr_Cfg, UDC_SYSCON2); -+ } -+ } -+ } -+ -+ /* select EP0 tx FIFO */ -+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); -+ /* clear endpoint (no data bytes in status stage) */ -+ outw (UDC_Clr_EP, UDC_CTRL); -+ /* enable the EP0 tx FIFO */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect the endpoint */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+} -+ -+/* udc_state_transition_up -+ * udc_state_transition_down -+ * -+ * Helper functions to implement device state changes. The device states and -+ * the events that transition between them are: -+ * -+ * STATE_ATTACHED -+ * || /\ -+ * \/ || -+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET -+ * || /\ -+ * \/ || -+ * STATE_POWERED -+ * || /\ -+ * \/ || -+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION -+ * || /\ -+ * \/ || -+ * STATE_DEFAULT -+ * || /\ -+ * \/ || -+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET -+ * || /\ -+ * \/ || -+ * STATE_ADDRESSED -+ * || /\ -+ * \/ || -+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED -+ * || /\ -+ * \/ || -+ * STATE_CONFIGURED -+ * -+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED -+ * to STATE_CONFIGURED) from the specified initial state to the specified final -+ * state, passing through each intermediate state on the way. If the initial -+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then -+ * no state transitions will take place. -+ * -+ * udc_state_transition_down transitions down (in the direction from -+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the -+ * specified final state, passing through each intermediate state on the way. -+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final -+ * state, then no state transitions will take place. -+ * -+ * These functions must only be called with interrupts disabled. -+ */ -+static void udc_state_transition_up (usb_device_state_t initial, -+ usb_device_state_t final) -+{ -+ if (initial < final) { -+ switch (initial) { -+ case STATE_ATTACHED: -+ usbd_device_event_irq (udc_device, -+ DEVICE_HUB_CONFIGURED, 0); -+ if (final == STATE_POWERED) -+ break; -+ case STATE_POWERED: -+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0); -+ if (final == STATE_DEFAULT) -+ break; -+ case STATE_DEFAULT: -+ usbd_device_event_irq (udc_device, -+ DEVICE_ADDRESS_ASSIGNED, 0); -+ if (final == STATE_ADDRESSED) -+ break; -+ case STATE_ADDRESSED: -+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, -+ 0); -+ case STATE_CONFIGURED: -+ break; -+ default: -+ break; -+ } -+ } -+} -+ -+static void udc_state_transition_down (usb_device_state_t initial, -+ usb_device_state_t final) -+{ -+ if (initial > final) { -+ switch (initial) { -+ case STATE_CONFIGURED: -+ usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0); -+ if (final == STATE_ADDRESSED) -+ break; -+ case STATE_ADDRESSED: -+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0); -+ if (final == STATE_DEFAULT) -+ break; -+ case STATE_DEFAULT: -+ usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0); -+ if (final == STATE_POWERED) -+ break; -+ case STATE_POWERED: -+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0); -+ case STATE_ATTACHED: -+ break; -+ default: -+ break; -+ } -+ } -+} -+ -+/* Handle all device state changes. -+ * This function implements TRM Figure 14-21. -+ */ -+static void omap1510_udc_state_changed (void) -+{ -+ u16 bits; -+ u16 devstat = inw (UDC_DEVSTAT); -+ -+ UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat); -+ -+ bits = devstat ^ udc_devstat; -+ if (bits) { -+ if (bits & UDC_ATT) { -+ if (devstat & UDC_ATT) { -+ UDCDBG ("device attached and powered"); -+ udc_state_transition_up (udc_device->device_state, STATE_POWERED); -+ } else { -+ UDCDBG ("device detached or unpowered"); -+ udc_state_transition_down (udc_device->device_state, STATE_ATTACHED); -+ } -+ } -+ if (bits & UDC_USB_Reset) { -+ if (devstat & UDC_USB_Reset) { -+ UDCDBG ("device reset in progess"); -+ udc_state_transition_down (udc_device->device_state, STATE_POWERED); -+ } else { -+ UDCDBG ("device reset completed"); -+ } -+ } -+ if (bits & UDC_DEF) { -+ if (devstat & UDC_DEF) { -+ UDCDBG ("device entering default state"); -+ udc_state_transition_up (udc_device->device_state, STATE_DEFAULT); -+ } else { -+ UDCDBG ("device leaving default state"); -+ udc_state_transition_down (udc_device->device_state, STATE_POWERED); -+ } -+ } -+ if (bits & UDC_SUS) { -+ if (devstat & UDC_SUS) { -+ UDCDBG ("entering suspended state"); -+ usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0); -+ } else { -+ UDCDBG ("leaving suspended state"); -+ usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0); -+ } -+ } -+ if (bits & UDC_R_WK_OK) { -+ UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK) -+ ? "enabled" : "disabled"); -+ } -+ if (bits & UDC_ADD) { -+ if (devstat & UDC_ADD) { -+ UDCDBG ("default -> addressed"); -+ udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED); -+ } else { -+ UDCDBG ("addressed -> default"); -+ udc_state_transition_down (udc_device->device_state, STATE_DEFAULT); -+ } -+ } -+ if (bits & UDC_CFG) { -+ if (devstat & UDC_CFG) { -+ UDCDBG ("device configured"); -+ /* The ep0_recv_setup function generates the -+ * DEVICE_CONFIGURED event when a -+ * USB_REQ_SET_CONFIGURATION setup packet is -+ * received, so we should already be in the -+ * state STATE_CONFIGURED. -+ */ -+ udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED); -+ } else { -+ UDCDBG ("device deconfigured"); -+ udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED); -+ } -+ } -+ } -+ -+ /* Clear interrupt source */ -+ outw (UDC_DS_Chg, UDC_IRQ_SRC); -+ -+ /* Save current DEVSTAT */ -+ udc_devstat = devstat; -+} -+ -+static void s3c2410_udc_ep0(void) -+{ -+ u_int8_t ep0csr; -+ -+ UDCDBG("-> Entering EP0 handler"); -+ -+ S3C2410_UDC_SETIX(EP0); -+ ep0csr = inb(S3C2410_UDC_IN_CSR1_REG); -+ -+ /* clear stall status */ -+ if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { -+ clear_sp0_sst; -+ /* FIXME */ -+ ep0_idle(); -+ } -+ -+ if (ep0csr & S3C2410_UDC_EP0_CSR_SE -+ && dev->ep0state != EP0_IDLE) { -+ clear_ep0_se; -+ ep0_idle(); -+ } -+ -+ switch (dev->ep0state) { -+ case EP0_IDLE: -+ if (ep0crs & S3C2410_UDC_EP0_CSR_OPKRDY) { -+ } -+ break; -+ case EP0_IN_DATA_PHASE: -+ break; -+ case EP0_OUT_DATA_PHASE: -+ break; -+ case EP0_END_XFER: -+ break; -+ case EP0_STALL: -+ set_ep0_ss; -+ break; -+ } -+} -+ -+ -+} -+ -+/* Handle SETUP USB interrupt. -+ * This function implements TRM Figure 14-14. -+ */ -+static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint) -+{ -+ UDCDBG ("-> Entering device setup"); -+ -+ do { -+ const int setup_pktsize = 8; -+ unsigned char *datap = -+ (unsigned char *) &ep0_urb->device_request; -+ -+ /* Gain access to EP 0 setup FIFO */ -+ outw (UDC_Setup_Sel, UDC_EP_NUM); -+ -+ /* Read control request data */ -+ insb (UDC_DATA, datap, setup_pktsize); -+ -+ UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]", -+ *(datap + 0), *(datap + 1), *(datap + 2), -+ *(datap + 3), *(datap + 4), *(datap + 5), -+ *(datap + 6), *(datap + 7)); -+ -+ /* Reset EP0 setup FIFO */ -+ outw (0, UDC_EP_NUM); -+ } while (inw (UDC_IRQ_SRC) & UDC_Setup); -+ -+ /* Try to process setup packet */ -+ if (ep0_recv_setup (ep0_urb)) { -+ /* Not a setup packet, stall next EP0 transaction */ -+ udc_stall_ep (0); -+ UDCDBG ("can't parse setup packet, still waiting for setup"); -+ return; -+ } -+ -+ /* Check direction */ -+ if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) -+ == USB_REQ_HOST2DEVICE) { -+ UDCDBG ("control write on EP0"); -+ if (le16_to_cpu (ep0_urb->device_request.wLength)) { -+ /* We don't support control write data stages. -+ * The only standard control write request with a data -+ * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't -+ * support that so we just stall those requests. A -+ * function driver might support a non-standard -+ * write request with a data stage, but it isn't -+ * obvious what we would do with the data if we read it -+ * so we'll just stall it. It seems like the API isn't -+ * quite right here. -+ */ -+#if 0 -+ /* Here is what we would do if we did support control -+ * write data stages. -+ */ -+ ep0_urb->actual_length = 0; -+ outw (0, UDC_EP_NUM); -+ /* enable the EP0 rx FIFO */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+#else -+ /* Stall this request */ -+ UDCDBG ("Stalling unsupported EP0 control write data " -+ "stage."); -+ udc_stall_ep (0); -+#endif -+ } else { -+ omap1510_prepare_for_control_write_status (ep0_urb); -+ } -+ } else { -+ UDCDBG ("control read on EP0"); -+ /* The ep0_recv_setup function has already placed our response -+ * packet data in ep0_urb->buffer and the packet length in -+ * ep0_urb->actual_length. -+ */ -+ endpoint->tx_urb = ep0_urb; -+ endpoint->sent = 0; -+ /* select the EP0 tx FIFO */ -+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); -+ /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo -+ * will update endpoint->last with the number of bytes written -+ * to the FIFO. -+ */ -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable the FIFO to start the packet transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect the EP0 tx FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } -+ -+ UDCDBG ("<- Leaving device setup"); -+} -+ -+/* Handle endpoint 0 RX interrupt -+ * This routine implements TRM Figure 14-16. -+ */ -+static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint) -+{ -+ unsigned short status; -+ -+ UDCDBG ("RX on EP0"); -+ /* select EP0 rx FIFO */ -+ outw (UDC_EP_Sel, UDC_EP_NUM); -+ -+ status = inw (UDC_STAT_FLG); -+ -+ if (status & UDC_ACK) { -+ /* Check direction */ -+ if ((ep0_urb->device_request.bmRequestType -+ & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) { -+ /* This rx interrupt must be for a control write data -+ * stage packet. -+ * -+ * We don't support control write data stages. -+ * We should never end up here. -+ */ -+ -+ /* clear the EP0 rx FIFO */ -+ outw (UDC_Clr_EP, UDC_CTRL); -+ -+ /* deselect the EP0 rx FIFO */ -+ outw (0, UDC_EP_NUM); -+ -+ UDCDBG ("Stalling unexpected EP0 control write " -+ "data stage packet"); -+ udc_stall_ep (0); -+ } else { -+ /* This rx interrupt must be for a control read status -+ * stage packet. -+ */ -+ UDCDBG ("ACK on EP0 control read status stage packet"); -+ /* deselect EP0 rx FIFO */ -+ outw (0, UDC_EP_NUM); -+ } -+ } else if (status & UDC_STALL) { -+ UDCDBG ("EP0 stall during RX"); -+ /* deselect EP0 rx FIFO */ -+ outw (0, UDC_EP_NUM); -+ } else { -+ /* deselect EP0 rx FIFO */ -+ outw (0, UDC_EP_NUM); -+ } -+} -+ -+/* Handle endpoint 0 TX interrupt -+ * This routine implements TRM Figure 14-18. -+ */ -+static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint) -+{ -+ unsigned short status; -+ struct usb_device_request *request = &ep0_urb->device_request; -+ -+ UDCDBG ("TX on EP0"); -+ /* select EP0 TX FIFO */ -+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); -+ -+ status = inw (UDC_STAT_FLG); -+ if (status & UDC_ACK) { -+ /* Check direction */ -+ if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) == -+ USB_REQ_HOST2DEVICE) { -+ /* This tx interrupt must be for a control write status -+ * stage packet. -+ */ -+ UDCDBG ("ACK on EP0 control write status stage packet"); -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } else { -+ /* This tx interrupt must be for a control read data -+ * stage packet. -+ */ -+ int wLength = le16_to_cpu (request->wLength); -+ -+ /* Update our count of bytes sent so far in this -+ * transfer. -+ */ -+ endpoint->sent += endpoint->last; -+ -+ /* We are finished with this transfer if we have sent -+ * all of the bytes in our tx urb (urb->actual_length) -+ * unless we need a zero-length terminating packet. We -+ * need a zero-length terminating packet if we returned -+ * fewer bytes than were requested (wLength) by the host, -+ * and the number of bytes we returned is an exact -+ * multiple of the packet size endpoint->tx_packetSize. -+ */ -+ if ((endpoint->sent == ep0_urb->actual_length) -+ && ((ep0_urb->actual_length == wLength) -+ || (endpoint->last != -+ endpoint->tx_packetSize))) { -+ /* Done with control read data stage. */ -+ UDCDBG ("control read data stage complete"); -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ /* select EP0 RX FIFO to prepare for control -+ * read status stage. -+ */ -+ outw (UDC_EP_Sel, UDC_EP_NUM); -+ /* clear the EP0 RX FIFO */ -+ outw (UDC_Clr_EP, UDC_CTRL); -+ /* enable the EP0 RX FIFO */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect the EP0 RX FIFO */ -+ outw (0, UDC_EP_NUM); -+ } else { -+ /* We still have another packet of data to send -+ * in this control read data stage or else we -+ * need a zero-length terminating packet. -+ */ -+ UDCDBG ("ACK control read data stage packet"); -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable the EP0 tx FIFO to start transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } -+ } -+ } else if (status & UDC_STALL) { -+ UDCDBG ("EP0 stall during TX"); -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } else { -+ /* deselect EP0 TX FIFO */ -+ outw (UDC_EP_Dir, UDC_EP_NUM); -+ } -+} -+ -+/* Handle RX transaction on non-ISO endpoint. -+ * This function implements TRM Figure 14-27. -+ * The ep argument is a physical endpoint number for a non-ISO OUT endpoint -+ * in the range 1 to 15. -+ */ -+static void omap1510_udc_epn_rx (int ep) -+{ -+ unsigned short status; -+ -+ /* Check endpoint status */ -+ status = inw (UDC_STAT_FLG); -+ -+ if (status & UDC_ACK) { -+ int nbytes; -+ struct usb_endpoint_instance *endpoint = -+ omap1510_find_ep (ep); -+ -+ nbytes = omap1510_read_noniso_rx_fifo (endpoint); -+ usbd_rcv_complete (endpoint, nbytes, 0); -+ -+ /* enable rx FIFO to prepare for next packet */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ } else if (status & UDC_STALL) { -+ UDCDBGA ("STALL on RX endpoint %d", ep); -+ } else if (status & UDC_NAK) { -+ UDCDBGA ("NAK on RX ep %d", ep); -+ } else { -+ serial_printf ("omap-bi: RX on ep %d with status %x", ep, -+ status); -+ } -+} -+ -+/* Handle TX transaction on non-ISO endpoint. -+ * This function implements TRM Figure 14-29. -+ * The ep argument is a physical endpoint number for a non-ISO IN endpoint -+ * in the range 16 to 30. -+ */ -+static void omap1510_udc_epn_tx (int ep) -+{ -+ unsigned short status; -+ -+ /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */ -+ -+ /* Check endpoint status */ -+ status = inw (UDC_STAT_FLG); -+ -+ if (status & UDC_ACK) { -+ struct usb_endpoint_instance *endpoint = -+ omap1510_find_ep (ep); -+ -+ /* We need to transmit a terminating zero-length packet now if -+ * we have sent all of the data in this URB and the transfer -+ * size was an exact multiple of the packet size. -+ */ -+ if (endpoint->tx_urb -+ && (endpoint->last == endpoint->tx_packetSize) -+ && (endpoint->tx_urb->actual_length - endpoint->sent - -+ endpoint->last == 0)) { -+ /* Prepare to transmit a zero-length packet. */ -+ endpoint->sent += endpoint->last; -+ /* write 0 bytes of data to FIFO */ -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable tx FIFO to start transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ } else if (endpoint->tx_urb -+ && endpoint->tx_urb->actual_length) { -+ /* retire the data that was just sent */ -+ usbd_tx_complete (endpoint); -+ /* Check to see if we have more data ready to transmit -+ * now. -+ */ -+ if (endpoint->tx_urb -+ && endpoint->tx_urb->actual_length) { -+ /* write data to FIFO */ -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable tx FIFO to start transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ } -+ } -+ } else if (status & UDC_STALL) { -+ UDCDBGA ("STALL on TX endpoint %d", ep); -+ } else if (status & UDC_NAK) { -+ UDCDBGA ("NAK on TX endpoint %d", ep); -+ } else { -+ /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */ -+ } -+} -+ -+ -+/* -+------------------------------------------------------------------------------- -+*/ -+ -+/* Handle general USB interrupts and dispatch according to type. -+ * This function implements TRM Figure 14-13. -+ */ -+void s3c2410_udc_irq (void) -+{ -+ u_int8_t save_idx = inb(S3C2410_UDC_INDEX_REG); -+ u_int8_t usb_status = inb(S3C2410_UDC_USB_INT_REG); -+ u_int8_t usbd_status = inb(S3C2410_UDC_EP_INT_REG); -+ -+ UDCDBGA("< IRQ usbs=0x%02x, usbds=0x%02x start >", usb_status, -+ usbd_status); -+ -+ if (usb_status & S3C2410_UDC_USBINT_RESET) { -+ valid_irq++; -+ } -+ -+ if (usb_status & S3C2410_UDC_USBINT_RESUME) { -+ valid_irq++; -+ -+ } -+ -+ if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { -+ valid_irq++; -+ -+ } -+ -+ /* Endpoint Interrupts */ -+ if (usbd_status) { -+ int i; -+ -+ if (usbd_status & S3C2410_UDC_INT_EP0) { -+ s3c2410_udc_ep0(); -+ outb(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); -+ valid_irq++; -+ } -+ -+ for (i = 1; i < 5; i++) { -+ u_int32_t tmp = 1 << i; -+ -+ if (usbd_status & tmp) { -+ /* FIXME: Handle EP X */ -+ s3c2410_udc_epn(i); -+ outb(tmp, S3C2410_UDC_EP_INT_REG); -+ valid_irq++; -+ } -+ } -+ } -+ outb(save_idx, S3C2410_UDC_INDEX_REG); -+ -+#if 0 -+ if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */ -+ return; -+ -+ UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src); -+ /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */ -+ -+ if (irq_src & UDC_DS_Chg) { -+ /* Device status changed */ -+ omap1510_udc_state_changed (); -+ valid_irq++; -+ } -+ if (irq_src & UDC_EP0_RX) { -+ /* Endpoint 0 receive */ -+ outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */ -+ omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0); -+ valid_irq++; -+ } -+ if (irq_src & UDC_EP0_TX) { -+ /* Endpoint 0 transmit */ -+ outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */ -+ omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0); -+ valid_irq++; -+ } -+ if (irq_src & UDC_Setup) { -+ /* Device setup */ -+ omap1510_udc_setup (udc_device->bus->endpoint_array + 0); -+ valid_irq++; -+ } -+ /*if (!valid_irq) */ -+ /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */ -+#endif -+ UDCDBGA ("< IRQ end >", udc_interrupts); -+ -+ udc_interrupts++; -+} -+ -+/* This function implements TRM Figure 14-26. */ -+void omap1510_udc_noniso_irq (void) -+{ -+ unsigned short epnum; -+ unsigned short irq_src = inw (UDC_IRQ_SRC); -+ int valid_irq = 0; -+ -+ if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX))) -+ return; -+ -+ UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC)); -+ -+ if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */ -+ /* Determine the endpoint number for this interrupt */ -+ epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8; -+ UDCDBGA ("RX on ep %x", epnum); -+ -+ /* acknowledge interrupt */ -+ outw (UDC_EPn_RX, UDC_IRQ_SRC); -+ -+ if (epnum) { -+ /* select the endpoint FIFO */ -+ outw (UDC_EP_Sel | epnum, UDC_EP_NUM); -+ -+ omap1510_udc_epn_rx (epnum); -+ -+ /* deselect the endpoint FIFO */ -+ outw (epnum, UDC_EP_NUM); -+ } -+ valid_irq++; -+ } -+ if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */ -+ /* Determine the endpoint number for this interrupt */ -+ epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN; -+ UDCDBGA ("TX on ep %x", epnum); -+ -+ /* acknowledge interrupt */ -+ outw (UDC_EPn_TX, UDC_IRQ_SRC); -+ -+ if (epnum) { -+ /* select the endpoint FIFO */ -+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); -+ -+ omap1510_udc_epn_tx (epnum); -+ -+ /* deselect the endpoint FIFO */ -+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM); -+ } -+ valid_irq++; -+ } -+ if (!valid_irq) -+ serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n", -+ irq_src); -+} -+ -+/* -+------------------------------------------------------------------------------- -+*/ -+ -+ -+/* -+ * Start of public functions. -+ */ -+ -+/* Called to start packet transmission. */ -+void udc_endpoint_write (struct usb_endpoint_instance *endpoint) -+{ -+ unsigned short epnum = -+ endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; -+ -+ UDCDBGA ("Starting transmit on ep %x", epnum); -+ -+ if (endpoint->tx_urb) { -+ /* select the endpoint FIFO */ -+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); -+ /* write data to FIFO */ -+ omap1510_write_noniso_tx_fifo (endpoint); -+ /* enable tx FIFO to start transmission */ -+ outw (UDC_Set_FIFO_En, UDC_CTRL); -+ /* deselect the endpoint FIFO */ -+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM); -+ } -+} -+ -+/* Start to initialize h/w stuff */ -+int udc_init (void) -+{ -+ u16 udc_rev; -+ uchar value; -+ ulong gpio; -+ int i; -+ -+ /* Let the device settle down before we start */ -+ for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000); -+ -+ udc_device = NULL; -+ -+ UDCDBG ("starting"); -+ -+ /* Check peripheral reset. Must be 1 to make sure -+ MPU TIPB peripheral reset is inactive */ -+ UDCREG (ARM_RSTCT2); -+ -+ /* Set and check clock control. -+ * We might ought to be using the clock control API to do -+ * this instead of fiddling with the clock registers directly -+ * here. -+ */ -+ outw ((1 << 4) | (1 << 5), CLOCK_CTRL); -+ UDCREG (CLOCK_CTRL); -+ /* Set and check APLL */ -+ outw (0x0008, APLL_CTRL); -+ UDCREG (APLL_CTRL); -+ /* Set and check DPLL */ -+ outw (0x2210, DPLL_CTRL); -+ UDCREG (DPLL_CTRL); -+ /* Set and check SOFT */ -+ outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ); -+ /* Short delay to wait for DPLL */ -+ udelay (1000); -+ -+ /* Print banner with device revision */ -+ udc_rev = inw (UDC_REV) & 0xff; -+ printf ("USB: TI OMAP1510 USB function module rev %d.%d\n", -+ udc_rev >> 4, udc_rev & 0xf); -+ -+#ifdef CONFIG_OMAP_SX1 -+ i2c_read (0x32, 0x04, 1, &value, 1); -+ value |= 0x04; -+ i2c_write (0x32, 0x04, 1, &value, 1); -+ -+ i2c_read (0x32, 0x03, 1, &value, 1); -+ value |= 0x01; -+ i2c_write (0x32, 0x03, 1, &value, 1); -+ -+ gpio = inl(GPIO_PIN_CONTROL_REG); -+ gpio |= 0x0002; /* A_IRDA_OFF */ -+ gpio |= 0x0800; /* A_SWITCH */ -+ gpio |= 0x8000; /* A_USB_ON */ -+ outl (gpio, GPIO_PIN_CONTROL_REG); -+ -+ gpio = inl(GPIO_DIR_CONTROL_REG); -+ gpio &= ~0x0002; /* A_IRDA_OFF */ -+ gpio &= ~0x0800; /* A_SWITCH */ -+ gpio &= ~0x8000; /* A_USB_ON */ -+ outl (gpio, GPIO_DIR_CONTROL_REG); -+ -+ gpio = inl(GPIO_DATA_OUTPUT_REG); -+ gpio |= 0x0002; /* A_IRDA_OFF */ -+ gpio &= ~0x0800; /* A_SWITCH */ -+ gpio &= ~0x8000; /* A_USB_ON */ -+ outl (gpio, GPIO_DATA_OUTPUT_REG); -+#endif -+ -+ /* The VBUS_MODE bit selects whether VBUS detection is done via -+ * software (1) or hardware (0). When software detection is -+ * selected, VBUS_CTRL selects whether USB is not connected (0) -+ * or connected (1). -+ */ -+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); -+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); -+ UDCREGL (FUNC_MUX_CTRL_0); -+ -+ /* -+ * At this point, device is ready for configuration... -+ */ -+ -+ UDCDBG ("disable USB interrupts"); -+ outw (0, UDC_IRQ_EN); -+ UDCREG (UDC_IRQ_EN); -+ -+ UDCDBG ("disable USB DMA"); -+ outw (0, UDC_DMA_IRQ_EN); -+ UDCREG (UDC_DMA_IRQ_EN); -+ -+ UDCDBG ("initialize SYSCON1"); -+ outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1); -+ UDCREG (UDC_SYSCON1); -+ -+ return 0; -+} -+ -+/* Stall endpoint */ -+static void udc_stall_ep (unsigned int ep_addr) -+{ -+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ -+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; -+ -+ UDCDBGA ("stall ep_addr %d", ep_addr); -+ -+ /* REVISIT? -+ * The OMAP TRM section 14.2.4.2 says we must check that the FIFO -+ * is empty before halting the endpoint. The current implementation -+ * doesn't check that the FIFO is empty. -+ */ -+ -+ if (!ep_num) { -+ outw (UDC_Stall_Cmd, UDC_SYSCON2); -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { -+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { -+ /* we have a valid rx endpoint, so halt it */ -+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); -+ outw (UDC_Set_Halt, UDC_CTRL); -+ outw (ep_num, UDC_EP_NUM); -+ } -+ } else { -+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { -+ /* we have a valid tx endpoint, so halt it */ -+ outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM); -+ outw (UDC_Set_Halt, UDC_CTRL); -+ outw (ep_num, UDC_EP_NUM); -+ } -+ } -+} -+ -+/* Reset endpoint */ -+#if 0 -+static void udc_reset_ep (unsigned int ep_addr) -+{ -+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ -+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; -+ -+ UDCDBGA ("reset ep_addr %d", ep_addr); -+ -+ if (!ep_num) { -+ /* control endpoint 0 can't be reset */ -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { -+ UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num, -+ inw (UDC_EP_RX (ep_num))); -+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { -+ /* we have a valid rx endpoint, so reset it */ -+ outw (ep_num | UDC_EP_Sel, UDC_EP_NUM); -+ outw (UDC_Reset_EP, UDC_CTRL); -+ outw (ep_num, UDC_EP_NUM); -+ UDCDBGA ("OUT endpoint %d reset", ep_num); -+ } -+ } else { -+ UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num, -+ inw (UDC_EP_TX (ep_num))); -+ /* Resetting of tx endpoints seems to be causing the USB function -+ * module to fail, which causes problems when the driver is -+ * uninstalled. We'll skip resetting tx endpoints for now until -+ * we figure out what the problem is. -+ */ -+#if 0 -+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { -+ /* we have a valid tx endpoint, so reset it */ -+ outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); -+ outw (UDC_Reset_EP, UDC_CTRL); -+ outw (ep_num | UDC_EP_Dir, UDC_EP_NUM); -+ UDCDBGA ("IN endpoint %d reset", ep_num); -+ } -+#endif -+ } -+} -+#endif -+ -+/* ************************************************************************** */ -+ -+/** -+ * udc_check_ep - check logical endpoint -+ * -+ * Return physical endpoint number to use for this logical endpoint or zero if not valid. -+ */ -+#if 0 -+int udc_check_ep (int logical_endpoint, int packetsize) -+{ -+ if ((logical_endpoint == 0x80) || -+ ((logical_endpoint & 0x8f) != logical_endpoint)) { -+ return 0; -+ } -+ -+ switch (packetsize) { -+ case 8: -+ case 16: -+ case 32: -+ case 64: -+ case 128: -+ case 256: -+ case 512: -+ break; -+ default: -+ return 0; -+ } -+ -+ return EP_ADDR_TO_PHYS_EP (logical_endpoint); -+} -+#endif -+ -+/* -+ * udc_setup_ep - setup endpoint -+ * -+ * Associate a physical endpoint with endpoint_instance -+ */ -+void udc_setup_ep (struct usb_device_instance *device, -+ unsigned int ep, struct usb_endpoint_instance *endpoint) -+{ -+ UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address); -+ -+ /* This routine gets called by bi_modinit for endpoint 0 and from -+ * bi_config for all of the other endpoints. bi_config gets called -+ * during the DEVICE_CREATE, DEVICE_CONFIGURED, and -+ * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet -+ * RAM after bi_config scans the selected device configuration and -+ * initializes the endpoint structures, but before this routine enables -+ * the OUT endpoint FIFOs. Since bi_config calls this routine in a -+ * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our -+ * packet RAM here when ep==1. -+ * I really hate to do this here, but it seems like the API exported -+ * by the USB bus interface controller driver to the usbd-bi module -+ * isn't quite right so there is no good place to do this. -+ */ -+ if (ep == 1) { -+ omap1510_deconfigure_device (); -+ omap1510_configure_device (device); -+ } -+ -+ if (endpoint && (ep < UDC_MAX_ENDPOINTS)) { -+ int ep_addr = endpoint->endpoint_address; -+ -+ if (!ep_addr) { -+ /* nothing to do for endpoint 0 */ -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ /* nothing to do for IN (tx) endpoints */ -+ } else { /* OUT (rx) endpoint */ -+ if (endpoint->rcv_packetSize) { -+ /*struct urb* urb = &(urb_out_array[ep&0xFF]); */ -+ /*urb->endpoint = endpoint; */ -+ /*urb->device = device; */ -+ /*urb->buffer_length = sizeof(urb->buffer); */ -+ -+ /*endpoint->rcv_urb = urb; */ -+ omap1510_prepare_endpoint_for_rx (ep_addr); -+ } -+ } -+ } -+} -+ -+/** -+ * udc_disable_ep - disable endpoint -+ * @ep: -+ * -+ * Disable specified endpoint -+ */ -+#if 0 -+void udc_disable_ep (unsigned int ep_addr) -+{ -+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ -+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; -+ struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */ -+ -+ UDCDBGA ("disable ep_addr %d", ep_addr); -+ -+ if (!ep_num) { -+ /* nothing to do for endpoint 0 */ ; -+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ if (endpoint->tx_packetSize) { -+ /* we have a valid tx endpoint */ -+ /*usbd_flush_tx(endpoint); */ -+ endpoint->tx_urb = NULL; -+ } -+ } else { -+ if (endpoint->rcv_packetSize) { -+ /* we have a valid rx endpoint */ -+ /*usbd_flush_rcv(endpoint); */ -+ endpoint->rcv_urb = NULL; -+ } -+ } -+} -+#endif -+ -+/* ************************************************************************** */ -+ -+/** -+ * udc_connected - is the USB cable connected -+ * -+ * Return non-zero if cable is connected. -+ */ -+#if 0 -+int udc_connected (void) -+{ -+ return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT); -+} -+#endif -+ -+/* Turn on the USB connection by enabling the pullup resistor */ -+void udc_connect (void) -+{ -+ UDCDBG ("connect, enable Pullup"); -+} -+ -+/* Turn off the USB connection by disabling the pullup resistor */ -+void udc_disconnect (void) -+{ -+ UDCDBG ("disconnect, disable Pullup"); -+} -+ -+/* ************************************************************************** */ -+ -+ -+/* -+ * udc_disable_interrupts - disable interrupts -+ * switch off interrupts -+ */ -+#if 0 -+void udc_disable_interrupts (struct usb_device_instance *device) -+{ -+ UDCDBG ("disabling all interrupts"); -+ outw (0, UDC_IRQ_EN); -+} -+#endif -+ -+/* ************************************************************************** */ -+ -+/** -+ * udc_ep0_packetsize - return ep0 packetsize -+ */ -+#if 0 -+int udc_ep0_packetsize (void) -+{ -+ return EP0_PACKETSIZE; -+} -+#endif -+ -+/* Switch on the UDC */ -+void udc_enable (struct usb_device_instance *device) -+{ -+ UDCDBGA ("enable device %p, status %d", device, device->status); -+ -+ /* initialize driver state variables */ -+ udc_devstat = 0; -+ -+ /* Save the device structure pointer */ -+ udc_device = device; -+ -+ /* Setup ep0 urb */ -+ if (!ep0_urb) { -+ ep0_urb = -+ usbd_alloc_urb (udc_device, -+ udc_device->bus->endpoint_array); -+ } else { -+ serial_printf ("udc_enable: ep0_urb already allocated %p\n", -+ ep0_urb); -+ } -+ -+#ifdef FIXME -+ /* The VBUS_MODE bit selects whether VBUS detection is done via -+ * software (1) or hardware (0). When software detection is -+ * selected, VBUS_CTRL selects whether USB is not connected (0) -+ * or connected (1). -+ */ -+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE, -+ FUNC_MUX_CTRL_0); -+ UDCREGL (FUNC_MUX_CTRL_0); -+#endif -+ -+ s3c2410_configure_device(device); -+} -+ -+/* Switch off the UDC */ -+void udc_disable (void) -+{ -+ UDCDBG ("disable UDC"); -+ -+ s3c2410_deconfigure_device(); -+ -+#ifdef FIXME -+ /* The VBUS_MODE bit selects whether VBUS detection is done via -+ * software (1) or hardware (0). When software detection is -+ * selected, VBUS_CTRL selects whether USB is not connected (0) -+ * or connected (1). -+ */ -+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); -+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); -+ UDCREGL (FUNC_MUX_CTRL_0); -+#endif -+ -+ /* Free ep0 URB */ -+ if (ep0_urb) { -+ /*usbd_dealloc_urb(ep0_urb); */ -+ ep0_urb = NULL; -+ } -+ -+ /* Reset device pointer. -+ * We ought to do this here to balance the initialization of udc_device -+ * in udc_enable, but some of our other exported functions get called -+ * by the bus interface driver after udc_disable, so we have to hang on -+ * to the device pointer to avoid a null pointer dereference. */ -+ /* udc_device = NULL; */ -+} -+ -+/** -+ * udc_startup - allow udc code to do any additional startup -+ */ -+void udc_startup_events (struct usb_device_instance *device) -+{ -+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ -+ usbd_device_event_irq (device, DEVICE_INIT, 0); -+ -+ /* The DEVICE_CREATE event puts the USB device in the state -+ * STATE_ATTACHED. -+ */ -+ usbd_device_event_irq (device, DEVICE_CREATE, 0); -+ -+ /* Some USB controller driver implementations signal -+ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. -+ * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, -+ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. -+ * The OMAP USB client controller has the capability to detect when the -+ * USB cable is connected to a powered USB bus via the ATT bit in the -+ * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and -+ * DEVICE_RESET events until later. -+ */ -+ -+ udc_enable (device); -+} -+ -+#endif -Index: git/fs/cramfs/cramfs.c -=================================================================== ---- git.orig/fs/cramfs/cramfs.c 2007-01-04 12:21:15.000000000 +0100 -+++ git/fs/cramfs/cramfs.c 2007-01-04 12:21:18.000000000 +0100 -@@ -27,7 +27,7 @@ - #include <common.h> - #include <malloc.h> - --#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) -+#if (CONFIG_COMMANDS & CFG_CMD_CRAMFS) - - #include <asm/byteorder.h> - #include <linux/stat.h> -@@ -343,5 +343,22 @@ - } - return 1; - } -- -+#else -+int cramfs_load (char *loadoffset, struct part_info *info, char *filename) -+{ -+ return -1; -+} -+int cramfs_ls (struct part_info *info, char *filename) -+{ -+ return 0; -+} -+int cramfs_info (struct part_info *info) -+{ -+ return 0; -+} -+int cramfs_check (struct part_info *info) -+{ -+ return 0; -+} - #endif /* CFG_FS_CRAMFS */ -+ -Index: git/include/asm-arm/arch-s3c24x0/mmc.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/include/asm-arm/arch-s3c24x0/mmc.h 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,112 @@ -+/* -+ * linux/drivers/mmc/mmc_pxa.h -+ * -+ * Author: Vladimir Shebordaev, Igor Oblakov -+ * Copyright: MontaVista Software Inc. -+ * -+ * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __MMC_PXA_P_H__ -+#define __MMC_PXA_P_H__ -+ -+#include <asm/arch/regs-sdi.h> -+ -+#define MMC_DEFAULT_RCA (1<<16) -+ -+#define MMC_BLOCK_SIZE 512 -+#define MMC_CMD_RESET 0 -+#define MMC_CMD_SEND_OP_COND 1 -+#define MMC_CMD_ALL_SEND_CID 2 -+#define MMC_CMD_SET_RCA 3 -+#define MMC_CMD_SELECT_CARD 7 -+#define MMC_CMD_SEND_CSD 9 -+#define MMC_CMD_SEND_CID 10 -+#define MMC_CMD_SEND_STATUS 13 -+#define MMC_CMD_SET_BLOCKLEN 16 -+#define MMC_CMD_READ_BLOCK 17 -+#define MMC_CMD_RD_BLK_MULTI 18 -+#define MMC_CMD_WRITE_BLOCK 24 -+ -+#define MMC_MAX_BLOCK_SIZE 512 -+ -+#define MMC_R1_IDLE_STATE 0x01 -+#define MMC_R1_ERASE_STATE 0x02 -+#define MMC_R1_ILLEGAL_CMD 0x04 -+#define MMC_R1_COM_CRC_ERR 0x08 -+#define MMC_R1_ERASE_SEQ_ERR 0x01 -+#define MMC_R1_ADDR_ERR 0x02 -+#define MMC_R1_PARAM_ERR 0x04 -+ -+#define MMC_R1B_WP_ERASE_SKIP 0x0002 -+#define MMC_R1B_ERR 0x0004 -+#define MMC_R1B_CC_ERR 0x0008 -+#define MMC_R1B_CARD_ECC_ERR 0x0010 -+#define MMC_R1B_WP_VIOLATION 0x0020 -+#define MMC_R1B_ERASE_PARAM 0x0040 -+#define MMC_R1B_OOR 0x0080 -+#define MMC_R1B_IDLE_STATE 0x0100 -+#define MMC_R1B_ERASE_RESET 0x0200 -+#define MMC_R1B_ILLEGAL_CMD 0x0400 -+#define MMC_R1B_COM_CRC_ERR 0x0800 -+#define MMC_R1B_ERASE_SEQ_ERR 0x1000 -+#define MMC_R1B_ADDR_ERR 0x2000 -+#define MMC_R1B_PARAM_ERR 0x4000 -+ -+typedef struct mmc_cid -+{ -+/* FIXME: BYTE_ORDER */ -+ uchar year:4, -+ month:4; -+ uchar sn[3]; -+ uchar fwrev:4, -+ hwrev:4; -+ uchar name[6]; -+ uchar id[3]; -+} mmc_cid_t; -+ -+typedef struct mmc_csd -+{ -+ uchar ecc:2, -+ file_format:2, -+ tmp_write_protect:1, -+ perm_write_protect:1, -+ copy:1, -+ file_format_grp:1; -+ uint64_t content_prot_app:1, -+ rsvd3:4, -+ write_bl_partial:1, -+ write_bl_len:4, -+ r2w_factor:3, -+ default_ecc:2, -+ wp_grp_enable:1, -+ wp_grp_size:5, -+ erase_grp_mult:5, -+ erase_grp_size:5, -+ c_size_mult1:3, -+ vdd_w_curr_max:3, -+ vdd_w_curr_min:3, -+ vdd_r_curr_max:3, -+ vdd_r_curr_min:3, -+ c_size:12, -+ rsvd2:2, -+ dsr_imp:1, -+ read_blk_misalign:1, -+ write_blk_misalign:1, -+ read_bl_partial:1; -+ -+ ushort read_bl_len:4, -+ ccc:12; -+ uchar tran_speed; -+ uchar nsac; -+ uchar taac; -+ uchar rsvd1:2, -+ spec_vers:4, -+ csd_structure:2; -+} mmc_csd_t; -+ -+ -+#endif /* __MMC_PXA_P_H__ */ -Index: git/include/asm-arm/arch-s3c24x0/regs-sdi.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/include/asm-arm/arch-s3c24x0/regs-sdi.h 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,110 @@ -+/* linux/include/asm/arch-s3c2410/regs-sdi.h -+ * -+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> -+ * http://www.simtec.co.uk/products/SWLINUX/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * S3C2410 MMC/SDIO register definitions -+ * -+ * Changelog: -+ * 18-Aug-2004 Ben Dooks Created initial file -+ * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates -+ * 29-Nov-2004 Ben Dooks Updated Koen's patch -+*/ -+ -+#ifndef __ASM_ARM_REGS_SDI -+#define __ASM_ARM_REGS_SDI "regs-sdi.h" -+ -+#define S3C2440_SDICON_SDRESET (1<<8) -+#define S3C2440_SDICON_MMCCLOCK (1<<5) -+#define S3C2410_SDICON_BYTEORDER (1<<4) -+#define S3C2410_SDICON_SDIOIRQ (1<<3) -+#define S3C2410_SDICON_RWAITEN (1<<2) -+#define S3C2410_SDICON_FIFORESET (1<<1) -+#define S3C2410_SDICON_CLOCKTYPE (1<<0) -+ -+#define S3C2410_SDICMDCON_ABORT (1<<12) -+#define S3C2410_SDICMDCON_WITHDATA (1<<11) -+#define S3C2410_SDICMDCON_LONGRSP (1<<10) -+#define S3C2410_SDICMDCON_WAITRSP (1<<9) -+#define S3C2410_SDICMDCON_CMDSTART (1<<8) -+#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -+#define S3C2410_SDICMDCON_INDEX (0x3f) -+ -+#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -+#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -+#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -+#define S3C2410_SDICMDSTAT_XFERING (1<<8) -+#define S3C2410_SDICMDSTAT_INDEX (0xff) -+ -+#define S3C2440_SDIDCON_DS_BYTE (0<<22) -+#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -+#define S3C2440_SDIDCON_DS_WORD (2<<22) -+#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -+#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -+#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -+#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -+#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -+#define S3C2410_SDIDCON_WIDEBUS (1<<16) -+#define S3C2410_SDIDCON_DMAEN (1<<15) -+#define S3C2410_SDIDCON_STOP (1<<14) -+#define S3C2440_SDIDCON_DATSTART (1<<14) -+#define S3C2410_SDIDCON_DATMODE (3<<12) -+#define S3C2410_SDIDCON_BLKNUM (0x7ff) -+ -+/* constants for S3C2410_SDIDCON_DATMODE */ -+#define S3C2410_SDIDCON_XFER_READY (0<<12) -+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -+#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -+#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) -+ -+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -+#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) -+ -+#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -+#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -+#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -+#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -+#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -+#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -+#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -+#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -+#define S3C2410_SDIDSTA_TXDATAON (1<<1) -+#define S3C2410_SDIDSTA_RXDATAON (1<<0) -+ -+#define S3C2440_SDIFSTA_FIFORESET (1<<16) -+#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -+#define S3C2410_SDIFSTA_TFDET (1<<13) -+#define S3C2410_SDIFSTA_RFDET (1<<12) -+#define S3C2410_SDIFSTA_TFHALF (1<<11) -+#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -+#define S3C2410_SDIFSTA_RFLAST (1<<9) -+#define S3C2410_SDIFSTA_RFFULL (1<<8) -+#define S3C2410_SDIFSTA_RFHALF (1<<7) -+#define S3C2410_SDIFSTA_COUNTMASK (0x7f) -+ -+#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -+#define S3C2410_SDIIMSK_CMDSENT (1<<16) -+#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -+#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -+#define S3C2410_SDIIMSK_READWAIT (1<<13) -+#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -+#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -+#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -+#define S3C2410_SDIIMSK_DATACRC (1<<9) -+#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -+#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -+#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -+#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -+#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -+#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -+#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -+#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -+#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) -+ -+#endif /* __ASM_ARM_REGS_SDI */ -Index: git/include/asm-arm/mach-types.h -=================================================================== ---- git.orig/include/asm-arm/mach-types.h 2007-01-04 12:21:15.000000000 +0100 -+++ git/include/asm-arm/mach-types.h 2007-01-04 12:21:18.000000000 +0100 -@@ -424,7 +424,7 @@ - #define MACH_TYPE_MPORT3S 411 - #define MACH_TYPE_RA_ALPHA 412 - #define MACH_TYPE_XCEP 413 --#define MACH_TYPE_ARCOM_MERCURY 414 -+#define MACH_TYPE_ARCOM_VULCAN 414 - #define MACH_TYPE_STARGATE 415 - #define MACH_TYPE_ARMADILLOJ 416 - #define MACH_TYPE_ELROY_JACK 417 -@@ -457,7 +457,7 @@ - #define MACH_TYPE_XM250 444 - #define MACH_TYPE_T6TC1XB 445 - #define MACH_TYPE_ESS710 446 --#define MACH_TYPE_MX3ADS 447 -+#define MACH_TYPE_MX31ADS 447 - #define MACH_TYPE_HIMALAYA 448 - #define MACH_TYPE_BOLFENK 449 - #define MACH_TYPE_AT91RM9200KR 450 -@@ -736,7 +736,309 @@ - #define MACH_TYPE_LN2410SBC 725 - #define MACH_TYPE_CB3RUFC 726 - #define MACH_TYPE_MP2USB 727 --#define MACH_TYPE_PDNB3 1002 -+#define MACH_TYPE_NTNP425C 728 -+#define MACH_TYPE_COLIBRI 729 -+#define MACH_TYPE_PCM7220 730 -+#define MACH_TYPE_GATEWAY7001 731 -+#define MACH_TYPE_PCM027 732 -+#define MACH_TYPE_CMPXA 733 -+#define MACH_TYPE_ANUBIS 734 -+#define MACH_TYPE_ITE8152 735 -+#define MACH_TYPE_LPC3XXX 736 -+#define MACH_TYPE_PUPPETEER 737 -+#define MACH_TYPE_MACH_VADATECH 738 -+#define MACH_TYPE_E570 739 -+#define MACH_TYPE_X50 740 -+#define MACH_TYPE_RECON 741 -+#define MACH_TYPE_XBOARDGP8 742 -+#define MACH_TYPE_FPIC2 743 -+#define MACH_TYPE_AKITA 744 -+#define MACH_TYPE_A81 745 -+#define MACH_TYPE_SVM_SC25X 746 -+#define MACH_TYPE_VADATECH020 747 -+#define MACH_TYPE_TLI 748 -+#define MACH_TYPE_EDB9315LC 749 -+#define MACH_TYPE_PASSEC 750 -+#define MACH_TYPE_DS_TIGER 751 -+#define MACH_TYPE_E310 752 -+#define MACH_TYPE_E330 753 -+#define MACH_TYPE_RT3000 754 -+#define MACH_TYPE_NOKIA770 755 -+#define MACH_TYPE_PNX0106 756 -+#define MACH_TYPE_HX21XX 757 -+#define MACH_TYPE_FARADAY 758 -+#define MACH_TYPE_SBC9312 759 -+#define MACH_TYPE_BATMAN 760 -+#define MACH_TYPE_JPD201 761 -+#define MACH_TYPE_MIPSA 762 -+#define MACH_TYPE_KACOM 763 -+#define MACH_TYPE_SWARCOCPU 764 -+#define MACH_TYPE_SWARCODSL 765 -+#define MACH_TYPE_BLUEANGEL 766 -+#define MACH_TYPE_HAIRYGRAMA 767 -+#define MACH_TYPE_BANFF 768 -+#define MACH_TYPE_CARMEVA 769 -+#define MACH_TYPE_SAM255 770 -+#define MACH_TYPE_PPM10 771 -+#define MACH_TYPE_EDB9315A 772 -+#define MACH_TYPE_SUNSET 773 -+#define MACH_TYPE_STARGATE2 774 -+#define MACH_TYPE_INTELMOTE2 775 -+#define MACH_TYPE_TRIZEPS4 776 -+#define MACH_TYPE_MAINSTONE2 777 -+#define MACH_TYPE_EZ_IXP42X 778 -+#define MACH_TYPE_TAPWAVE_ZODIAC 779 -+#define MACH_TYPE_UNIVERSALMETER 780 -+#define MACH_TYPE_HICOARM9 781 -+#define MACH_TYPE_PNX4008 782 -+#define MACH_TYPE_KWS6000 783 -+#define MACH_TYPE_PORTUX920T 784 -+#define MACH_TYPE_EZ_X5 785 -+#define MACH_TYPE_OMAP_RUDOLPH 786 -+#define MACH_TYPE_CPUAT91 787 -+#define MACH_TYPE_REA9200 788 -+#define MACH_TYPE_ACTS_PUNE_SA1110 789 -+#define MACH_TYPE_IXP425 790 -+#define MACH_TYPE_ARGONPLUSODYSSEY 791 -+#define MACH_TYPE_PERCH 792 -+#define MACH_TYPE_EIS05R1 793 -+#define MACH_TYPE_PEPPERPAD 794 -+#define MACH_TYPE_SB3010 795 -+#define MACH_TYPE_RM9200 796 -+#define MACH_TYPE_DMA03 797 -+#define MACH_TYPE_ROAD_S101 798 -+#define MACH_TYPE_IQ_NEXTGEN_A 799 -+#define MACH_TYPE_IQ_NEXTGEN_B 800 -+#define MACH_TYPE_IQ_NEXTGEN_C 801 -+#define MACH_TYPE_IQ_NEXTGEN_D 802 -+#define MACH_TYPE_IQ_NEXTGEN_E 803 -+#define MACH_TYPE_MALLOW_AT91 804 -+#define MACH_TYPE_CYBERTRACKER_I 805 -+#define MACH_TYPE_GESBC931X 806 -+#define MACH_TYPE_CENTIPAD 807 -+#define MACH_TYPE_ARMSOC 808 -+#define MACH_TYPE_SE4200 809 -+#define MACH_TYPE_EMS197A 810 -+#define MACH_TYPE_MICRO9 811 -+#define MACH_TYPE_MICRO9L 812 -+#define MACH_TYPE_UC5471DSP 813 -+#define MACH_TYPE_SJ5471ENG 814 -+#define MACH_TYPE_CMPXA26X 815 -+#define MACH_TYPE_NC 816 -+#define MACH_TYPE_OMAP_PALMTE 817 -+#define MACH_TYPE_AJAX52X 818 -+#define MACH_TYPE_SIRIUSTAR 819 -+#define MACH_TYPE_IODATA_HDLG 820 -+#define MACH_TYPE_AT91RM9200UTL 821 -+#define MACH_TYPE_BIOSAFE 822 -+#define MACH_TYPE_MP1000 823 -+#define MACH_TYPE_PARSY 824 -+#define MACH_TYPE_CCXP 825 -+#define MACH_TYPE_OMAP_GSAMPLE 826 -+#define MACH_TYPE_REALVIEW_EB 827 -+#define MACH_TYPE_SAMOA 828 -+#define MACH_TYPE_T3XSCALE 829 -+#define MACH_TYPE_I878 830 -+#define MACH_TYPE_BORZOI 831 -+#define MACH_TYPE_GECKO 832 -+#define MACH_TYPE_DS101 833 -+#define MACH_TYPE_OMAP_PALMTT2 834 -+#define MACH_TYPE_XSCALE_PALMLD 835 -+#define MACH_TYPE_CC9C 836 -+#define MACH_TYPE_SBC1670 837 -+#define MACH_TYPE_IXDP28X5 838 -+#define MACH_TYPE_OMAP_PALMTT 839 -+#define MACH_TYPE_ML696K 840 -+#define MACH_TYPE_ARCOM_ZEUS 841 -+#define MACH_TYPE_OSIRIS 842 -+#define MACH_TYPE_MAESTRO 843 -+#define MACH_TYPE_TUNGE2 844 -+#define MACH_TYPE_IXBBM 845 -+#define MACH_TYPE_MX27 846 -+#define MACH_TYPE_AX8004 847 -+#define MACH_TYPE_AT91SAM9261EK 848 -+#define MACH_TYPE_LOFT 849 -+#define MACH_TYPE_MAGPIE 850 -+#define MACH_TYPE_MX21 851 -+#define MACH_TYPE_MB87M3400 852 -+#define MACH_TYPE_MGUARD_DELTA 853 -+#define MACH_TYPE_DAVINCI_DVDP 854 -+#define MACH_TYPE_HTCUNIVERSAL 855 -+#define MACH_TYPE_TPAD 856 -+#define MACH_TYPE_ROVERP3 857 -+#define MACH_TYPE_JORNADA928 858 -+#define MACH_TYPE_MV88FXX81 859 -+#define MACH_TYPE_STMP36XX 860 -+#define MACH_TYPE_SXNI79524 861 -+#define MACH_TYPE_AMS_DELTA 862 -+#define MACH_TYPE_URANIUM 863 -+#define MACH_TYPE_UCON 864 -+#define MACH_TYPE_NAS100D 865 -+#define MACH_TYPE_L083_1000 866 -+#define MACH_TYPE_EZX 867 -+#define MACH_TYPE_PNX5220 868 -+#define MACH_TYPE_BUTTE 869 -+#define MACH_TYPE_SRM2 870 -+#define MACH_TYPE_DSBR 871 -+#define MACH_TYPE_CRYSTALBALL 872 -+#define MACH_TYPE_TINYPXA27X 873 -+#define MACH_TYPE_HERBIE 874 -+#define MACH_TYPE_MAGICIAN 875 -+#define MACH_TYPE_CM4002 876 -+#define MACH_TYPE_B4 877 -+#define MACH_TYPE_MAUI 878 -+#define MACH_TYPE_CYBERTRACKER_G 879 -+#define MACH_TYPE_NXDKN 880 -+#define MACH_TYPE_MIO8390 881 -+#define MACH_TYPE_OMI_BOARD 882 -+#define MACH_TYPE_MX21CIV 883 -+#define MACH_TYPE_MAHI_CDAC 884 -+#define MACH_TYPE_XSCALE_PALMTX 885 -+#define MACH_TYPE_S3C2413 887 -+#define MACH_TYPE_SAMSYS_EP0 888 -+#define MACH_TYPE_WG302V1 889 -+#define MACH_TYPE_WG302V2 890 -+#define MACH_TYPE_EB42X 891 -+#define MACH_TYPE_IQ331ES 892 -+#define MACH_TYPE_COSYDSP 893 -+#define MACH_TYPE_UPLAT7D 894 -+#define MACH_TYPE_PTDAVINCI 895 -+#define MACH_TYPE_MBUS 896 -+#define MACH_TYPE_NADIA2VB 897 -+#define MACH_TYPE_R1000 898 -+#define MACH_TYPE_HW90250 899 -+#define MACH_TYPE_OMAP_2430SDP 900 -+#define MACH_TYPE_DAVINCI_EVM 901 -+#define MACH_TYPE_OMAP_TORNADO 902 -+#define MACH_TYPE_OLOCREEK 903 -+#define MACH_TYPE_PALMZ72 904 -+#define MACH_TYPE_NXDB500 905 -+#define MACH_TYPE_APF9328 906 -+#define MACH_TYPE_OMAP_WIPOQ 907 -+#define MACH_TYPE_OMAP_TWIP 908 -+#define MACH_TYPE_XSCALE_PALMTREO650 909 -+#define MACH_TYPE_ACUMEN 910 -+#define MACH_TYPE_XP100 911 -+#define MACH_TYPE_FS2410 912 -+#define MACH_TYPE_PXA270_CERF 913 -+#define MACH_TYPE_SQ2FTLPALM 914 -+#define MACH_TYPE_BSEMSERVER 915 -+#define MACH_TYPE_NETCLIENT 916 -+#define MACH_TYPE_XSCALE_PALMTT5 917 -+#define MACH_TYPE_OMAP_PALMTC 918 -+#define MACH_TYPE_OMAP_APOLLON 919 -+#define MACH_TYPE_ARGONLVEVB 920 -+#define MACH_TYPE_REA_2D 921 -+#define MACH_TYPE_TI3E524 922 -+#define MACH_TYPE_ATEB9200 923 -+#define MACH_TYPE_AUCKLAND 924 -+#define MACH_TYPE_AK3320M 925 -+#define MACH_TYPE_DURAMAX 926 -+#define MACH_TYPE_N35 927 -+#define MACH_TYPE_PRONGHORN 928 -+#define MACH_TYPE_FUNDY 929 -+#define MACH_TYPE_LOGICPD_PXA270 930 -+#define MACH_TYPE_CPU777 931 -+#define MACH_TYPE_SIMICON9201 932 -+#define MACH_TYPE_LEAP2_HPM 933 -+#define MACH_TYPE_CM922TXA10 934 -+#define MACH_TYPE_PXA 935 -+#define MACH_TYPE_SANDGATE2 936 -+#define MACH_TYPE_SANDGATE2G 937 -+#define MACH_TYPE_SANDGATE2P 938 -+#define MACH_TYPE_FRED_JACK 939 -+#define MACH_TYPE_TTG_COLOR1 940 -+#define MACH_TYPE_NXEB500HMI 941 -+#define MACH_TYPE_NETDCU8 942 -+#define MACH_TYPE_ML675050_CPU_BOA 943 -+#define MACH_TYPE_NG_FVX538 944 -+#define MACH_TYPE_NG_FVS338 945 -+#define MACH_TYPE_PNX4103 946 -+#define MACH_TYPE_HESDB 947 -+#define MACH_TYPE_XSILO 948 -+#define MACH_TYPE_ESPRESSO 949 -+#define MACH_TYPE_EMLC 950 -+#define MACH_TYPE_SISTERON 951 -+#define MACH_TYPE_RX1950 952 -+#define MACH_TYPE_TSC_VENUS 953 -+#define MACH_TYPE_DS101J 954 -+#define MACH_TYPE_MXC30030ADS 955 -+#define MACH_TYPE_FUJITSU_WIMAXSOC 956 -+#define MACH_TYPE_DUALPCMODEM 957 -+#define MACH_TYPE_GESBC9312 958 -+#define MACH_TYPE_HTCAPACHE 959 -+#define MACH_TYPE_IXDP435 960 -+#define MACH_TYPE_CATPROVT100 961 -+#define MACH_TYPE_PICOTUX1XX 962 -+#define MACH_TYPE_PICOTUX2XX 963 -+#define MACH_TYPE_DSMG600 964 -+#define MACH_TYPE_EMPC2 965 -+#define MACH_TYPE_VENTURA 966 -+#define MACH_TYPE_PHIDGET_SBC 967 -+#define MACH_TYPE_IJ3K 968 -+#define MACH_TYPE_PISGAH 969 -+#define MACH_TYPE_OMAP_FSAMPLE 970 -+#define MACH_TYPE_SG720 971 -+#define MACH_TYPE_REDFOX 972 -+#define MACH_TYPE_MYSH_EP9315_1 973 -+#define MACH_TYPE_TPF106 974 -+#define MACH_TYPE_AT91RM9200KG 975 -+#define MACH_TYPE_SLEDB 976 -+#define MACH_TYPE_ONTRACK 977 -+#define MACH_TYPE_PM1200 978 -+#define MACH_TYPE_ESS24XXX 979 -+#define MACH_TYPE_COREMP7 980 -+#define MACH_TYPE_NEXCODER_6446 981 -+#define MACH_TYPE_STVC8380 982 -+#define MACH_TYPE_TEKLYNX 983 -+#define MACH_TYPE_CARBONADO 984 -+#define MACH_TYPE_SYSMOS_MP730 985 -+#define MACH_TYPE_SNAPPER_CL15 986 -+#define MACH_TYPE_PGIGIM 987 -+#define MACH_TYPE_PTX9160P2 988 -+#define MACH_TYPE_DCORE1 989 -+#define MACH_TYPE_VICTORPXA 990 -+#define MACH_TYPE_MX2DTB 991 -+#define MACH_TYPE_PXA_IREX_ER0100 992 -+#define MACH_TYPE_OMAP_PALMZ71 993 -+#define MACH_TYPE_BARTEC_DEG 994 -+#define MACH_TYPE_HW50251 995 -+#define MACH_TYPE_IBOX 996 -+#define MACH_TYPE_ATLASLH7A404 997 -+#define MACH_TYPE_PT2026 998 -+#define MACH_TYPE_HTCALPINE 999 -+#define MACH_TYPE_BARTEC_VTU 1000 -+#define MACH_TYPE_VCOREII 1001 -+#define MACH_TYPE_PDNB3 1002 -+#define MACH_TYPE_HTCBEETLES 1003 -+#define MACH_TYPE_S3C6400 1004 -+#define MACH_TYPE_S3C2443 1005 -+#define MACH_TYPE_OMAP_LDK 1006 -+#define MACH_TYPE_SMDK2460 1007 -+#define MACH_TYPE_SMDK2440 1008 -+#define MACH_TYPE_SMDK2412 1009 -+#define MACH_TYPE_WEBBOX 1010 -+#define MACH_TYPE_CWWNDP 1011 -+#define MACH_TYPE_DRAGON 1012 -+#define MACH_TYPE_OPENDO_CPU_BOARD 1013 -+#define MACH_TYPE_CCM2200 1014 -+#define MACH_TYPE_ETWARM 1015 -+#define MACH_TYPE_M93030 1016 -+#define MACH_TYPE_CC7U 1017 -+#define MACH_TYPE_MTT_RANGER 1018 -+#define MACH_TYPE_NEXUS 1019 -+#define MACH_TYPE_DESMAN 1020 -+#define MACH_TYPE_BKDE303 1021 -+#define MACH_TYPE_SMDK2413 1022 -+#define MACH_TYPE_AML_M7200 1023 -+#define MACH_TYPE_AML_M5900 1024 -+#define MACH_TYPE_SG640 1025 -+#define MACH_TYPE_EDG79524 1026 -+#define MACH_TYPE_AI2410 1027 -+#define MACH_TYPE_IXP465 1028 -+#define MACH_TYPE_BALLOON3 1029 -+#define MACH_TYPE_QT2410 1108 -+#define MACH_TYPE_GTA01 1182 - - #ifdef CONFIG_ARCH_EBSA110 - # ifdef machine_arch_type -@@ -3541,9 +3843,9 @@ - # else - # define machine_arch_type MACH_TYPE_RAMSES - # endif --# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES) -+# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES) - #else --# define machine_is_ramses() (0) -+# define machine_is_mnci() (0) - #endif - - #ifdef CONFIG_ARCH_S28X -@@ -4501,9 +4803,9 @@ - # else - # define machine_arch_type MACH_TYPE_M825XX - # endif --# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX) -+# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX) - #else --# define machine_is_m825xx() (0) -+# define machine_is_comcerto() (0) - #endif - - #ifdef CONFIG_SA1100_M7100 -@@ -5658,16 +5960,16 @@ - # define machine_is_xcep() (0) - #endif - --#ifdef CONFIG_MACH_ARCOM_MERCURY -+#ifdef CONFIG_MACH_ARCOM_VULCAN - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_ARCOM_MERCURY -+# define machine_arch_type MACH_TYPE_ARCOM_VULCAN - # endif --# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY) -+# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN) - #else --# define machine_is_arcom_mercury() (0) -+# define machine_is_arcom_vulcan() (0) - #endif - - #ifdef CONFIG_MACH_STARGATE -@@ -6054,16 +6356,16 @@ - # define machine_is_ess710() (0) - #endif - --#ifdef CONFIG_MACH_MX3ADS -+#ifdef CONFIG_MACH_MX31ADS - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_MX3ADS -+# define machine_arch_type MACH_TYPE_MX31ADS - # endif --# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS) -+# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS) - #else --# define machine_is_mx3ads() (0) -+# define machine_is_mx31ads() (0) - #endif - - #ifdef CONFIG_MACH_HIMALAYA -@@ -7333,9 +7635,9 @@ - # else - # define machine_arch_type MACH_TYPE_ARGONPLUSEVB - # endif --# define machine_is_argonplusevb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) -+# define machine_is_i30030evb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) - #else --# define machine_is_argonplusevb() (0) -+# define machine_is_i30030evb() (0) - #endif - - #ifdef CONFIG_MACH_SCMA11EVB -@@ -7345,9 +7647,9 @@ - # else - # define machine_arch_type MACH_TYPE_SCMA11EVB - # endif --# define machine_is_scma11evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) -+# define machine_is_mxc27530evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) - #else --# define machine_is_scma11evb() (0) -+# define machine_is_mxc27530evb() (0) - #endif - - #ifdef CONFIG_MACH_SMDK2800 -@@ -8305,9 +8607,9 @@ - # else - # define machine_arch_type MACH_TYPE_SCMA11BB - # endif --# define machine_is_scma11bb() (machine_arch_type == MACH_TYPE_SCMA11BB) -+# define machine_is_mxc27530ads() (machine_arch_type == MACH_TYPE_SCMA11BB) - #else --# define machine_is_scma11bb() (0) -+# define machine_is_mxc27530ads() (0) - #endif - - #ifdef CONFIG_MACH_TRIZEPS3 -@@ -9193,9 +9495,9 @@ - # else - # define machine_arch_type MACH_TYPE_ZEUSEVB - # endif --# define machine_is_zeusevb() (machine_arch_type == MACH_TYPE_ZEUSEVB) -+# define machine_is_mxc91131evb() (machine_arch_type == MACH_TYPE_ZEUSEVB) - #else --# define machine_is_zeusevb() (0) -+# define machine_is_mxc91131evb() (0) - #endif - - #ifdef CONFIG_MACH_P700 -@@ -9402,6 +9704,3643 @@ - # define machine_is_mp2usb() (0) - #endif - -+#ifdef CONFIG_MACH_NTNP425C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NTNP425C -+# endif -+# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C) -+#else -+# define machine_is_ntnp425c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COLIBRI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COLIBRI -+# endif -+# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI) -+#else -+# define machine_is_colibri() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PCM7220 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PCM7220 -+# endif -+# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220) -+#else -+# define machine_is_pcm7220() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GATEWAY7001 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GATEWAY7001 -+# endif -+# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001) -+#else -+# define machine_is_gateway7001() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PCM027 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PCM027 -+# endif -+# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027) -+#else -+# define machine_is_pcm027() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CMPXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CMPXA -+# endif -+# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA) -+#else -+# define machine_is_cmpxa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ANUBIS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ANUBIS -+# endif -+# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS) -+#else -+# define machine_is_anubis() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ITE8152 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ITE8152 -+# endif -+# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152) -+#else -+# define machine_is_ite8152() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LPC3XXX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LPC3XXX -+# endif -+# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX) -+#else -+# define machine_is_lpc3xxx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PUPPETEER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PUPPETEER -+# endif -+# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER) -+#else -+# define machine_is_puppeteer() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MACH_VADATECH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MACH_VADATECH -+# endif -+# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH) -+#else -+# define machine_is_vt001() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E570 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E570 -+# endif -+# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570) -+#else -+# define machine_is_e570() (0) -+#endif -+ -+#ifdef CONFIG_MACH_X50 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_X50 -+# endif -+# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50) -+#else -+# define machine_is_x50() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RECON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RECON -+# endif -+# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON) -+#else -+# define machine_is_recon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XBOARDGP8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XBOARDGP8 -+# endif -+# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8) -+#else -+# define machine_is_xboardgp8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FPIC2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FPIC2 -+# endif -+# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2) -+#else -+# define machine_is_fpic2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AKITA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AKITA -+# endif -+# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA) -+#else -+# define machine_is_akita() (0) -+#endif -+ -+#ifdef CONFIG_MACH_A81 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_A81 -+# endif -+# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81) -+#else -+# define machine_is_a81() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SVM_SC25X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SVM_SC25X -+# endif -+# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X) -+#else -+# define machine_is_svm_sc25x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VADATECH020 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VADATECH020 -+# endif -+# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020) -+#else -+# define machine_is_vt020() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TLI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TLI -+# endif -+# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI) -+#else -+# define machine_is_tli() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDB9315LC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDB9315LC -+# endif -+# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC) -+#else -+# define machine_is_edb9315lc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PASSEC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PASSEC -+# endif -+# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC) -+#else -+# define machine_is_passec() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS_TIGER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS_TIGER -+# endif -+# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER) -+#else -+# define machine_is_ds_tiger() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E310 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E310 -+# endif -+# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310) -+#else -+# define machine_is_e310() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E330 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E330 -+# endif -+# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330) -+#else -+# define machine_is_e330() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RT3000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RT3000 -+# endif -+# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000) -+#else -+# define machine_is_rt3000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NOKIA770 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NOKIA770 -+# endif -+# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770) -+#else -+# define machine_is_nokia770() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX0106 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX0106 -+# endif -+# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106) -+#else -+# define machine_is_pnx0106() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HX21XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HX21XX -+# endif -+# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX) -+#else -+# define machine_is_hx21xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FARADAY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FARADAY -+# endif -+# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY) -+#else -+# define machine_is_faraday() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SBC9312 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SBC9312 -+# endif -+# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312) -+#else -+# define machine_is_sbc9312() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BATMAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BATMAN -+# endif -+# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN) -+#else -+# define machine_is_batman() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JPD201 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JPD201 -+# endif -+# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201) -+#else -+# define machine_is_jpd201() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MIPSA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MIPSA -+# endif -+# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA) -+#else -+# define machine_is_mipsa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_KACOM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_KACOM -+# endif -+# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM) -+#else -+# define machine_is_kacom() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SWARCOCPU -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SWARCOCPU -+# endif -+# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU) -+#else -+# define machine_is_swarcocpu() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SWARCODSL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SWARCODSL -+# endif -+# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL) -+#else -+# define machine_is_swarcodsl() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BLUEANGEL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BLUEANGEL -+# endif -+# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL) -+#else -+# define machine_is_blueangel() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HAIRYGRAMA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HAIRYGRAMA -+# endif -+# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA) -+#else -+# define machine_is_hairygrama() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BANFF -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BANFF -+# endif -+# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF) -+#else -+# define machine_is_banff() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CARMEVA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CARMEVA -+# endif -+# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA) -+#else -+# define machine_is_carmeva() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAM255 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAM255 -+# endif -+# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255) -+#else -+# define machine_is_sam255() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PPM10 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PPM10 -+# endif -+# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10) -+#else -+# define machine_is_ppm10() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDB9315A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDB9315A -+# endif -+# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A) -+#else -+# define machine_is_edb9315a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SUNSET -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SUNSET -+# endif -+# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET) -+#else -+# define machine_is_sunset() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STARGATE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STARGATE2 -+# endif -+# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2) -+#else -+# define machine_is_stargate2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_INTELMOTE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_INTELMOTE2 -+# endif -+# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2) -+#else -+# define machine_is_intelmote2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TRIZEPS4 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TRIZEPS4 -+# endif -+# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4) -+#else -+# define machine_is_trizeps4() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAINSTONE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAINSTONE2 -+# endif -+# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2) -+#else -+# define machine_is_mainstone2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZ_IXP42X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZ_IXP42X -+# endif -+# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X) -+#else -+# define machine_is_ez_ixp42x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TAPWAVE_ZODIAC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC -+# endif -+# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC) -+#else -+# define machine_is_tapwave_zodiac() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UNIVERSALMETER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UNIVERSALMETER -+# endif -+# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER) -+#else -+# define machine_is_universalmeter() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HICOARM9 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HICOARM9 -+# endif -+# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9) -+#else -+# define machine_is_hicoarm9() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX4008 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX4008 -+# endif -+# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008) -+#else -+# define machine_is_pnx4008() (0) -+#endif -+ -+#ifdef CONFIG_MACH_KWS6000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_KWS6000 -+# endif -+# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000) -+#else -+# define machine_is_kws6000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PORTUX920T -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PORTUX920T -+# endif -+# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T) -+#else -+# define machine_is_portux920t() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZ_X5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZ_X5 -+# endif -+# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5) -+#else -+# define machine_is_ez_x5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_RUDOLPH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH -+# endif -+# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH) -+#else -+# define machine_is_omap_rudolph() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CPUAT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CPUAT91 -+# endif -+# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91) -+#else -+# define machine_is_cpuat91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REA9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REA9200 -+# endif -+# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200) -+#else -+# define machine_is_rea9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACTS_PUNE_SA1110 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110 -+# endif -+# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110) -+#else -+# define machine_is_acts_pune_sa1110() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXP425 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXP425 -+# endif -+# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425) -+#else -+# define machine_is_ixp425() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARGONPLUSODYSSEY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARGONPLUSODYSSEY -+# endif -+# define machine_is_i30030ads() (machine_arch_type == MACH_TYPE_ARGONPLUSODYSSEY) -+#else -+# define machine_is_i30030ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PERCH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PERCH -+# endif -+# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH) -+#else -+# define machine_is_perch() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EIS05R1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EIS05R1 -+# endif -+# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1) -+#else -+# define machine_is_eis05r1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PEPPERPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PEPPERPAD -+# endif -+# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD) -+#else -+# define machine_is_pepperpad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SB3010 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SB3010 -+# endif -+# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010) -+#else -+# define machine_is_sb3010() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RM9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RM9200 -+# endif -+# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200) -+#else -+# define machine_is_rm9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DMA03 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DMA03 -+# endif -+# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03) -+#else -+# define machine_is_dma03() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ROAD_S101 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ROAD_S101 -+# endif -+# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101) -+#else -+# define machine_is_road_s101() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A -+# endif -+# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A) -+#else -+# define machine_is_iq_nextgen_a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_B -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B -+# endif -+# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B) -+#else -+# define machine_is_iq_nextgen_b() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C -+# endif -+# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C) -+#else -+# define machine_is_iq_nextgen_c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D -+# endif -+# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D) -+#else -+# define machine_is_iq_nextgen_d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_E -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E -+# endif -+# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E) -+#else -+# define machine_is_iq_nextgen_e() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MALLOW_AT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MALLOW_AT91 -+# endif -+# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91) -+#else -+# define machine_is_mallow_at91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CYBERTRACKER_I -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CYBERTRACKER_I -+# endif -+# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I) -+#else -+# define machine_is_cybertracker_i() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GESBC931X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GESBC931X -+# endif -+# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X) -+#else -+# define machine_is_gesbc931x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CENTIPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CENTIPAD -+# endif -+# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD) -+#else -+# define machine_is_centipad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARMSOC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARMSOC -+# endif -+# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC) -+#else -+# define machine_is_armsoc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SE4200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SE4200 -+# endif -+# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200) -+#else -+# define machine_is_se4200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMS197A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMS197A -+# endif -+# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A) -+#else -+# define machine_is_ems197a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MICRO9 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MICRO9 -+# endif -+# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9) -+#else -+# define machine_is_micro9() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MICRO9L -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MICRO9L -+# endif -+# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L) -+#else -+# define machine_is_micro9l() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UC5471DSP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UC5471DSP -+# endif -+# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP) -+#else -+# define machine_is_uc5471dsp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SJ5471ENG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SJ5471ENG -+# endif -+# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG) -+#else -+# define machine_is_sj5471eng() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CMPXA26X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CMPXA26X -+# endif -+# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X) -+#else -+# define machine_is_none() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NC -+# endif -+# define machine_is_nc1() (machine_arch_type == MACH_TYPE_NC) -+#else -+# define machine_is_nc1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTE -+# endif -+# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE) -+#else -+# define machine_is_omap_palmte() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AJAX52X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AJAX52X -+# endif -+# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X) -+#else -+# define machine_is_ajax52x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIRIUSTAR -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIRIUSTAR -+# endif -+# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR) -+#else -+# define machine_is_siriustar() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IODATA_HDLG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IODATA_HDLG -+# endif -+# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG) -+#else -+# define machine_is_iodata_hdlg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91RM9200UTL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91RM9200UTL -+# endif -+# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL) -+#else -+# define machine_is_at91rm9200utl() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BIOSAFE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BIOSAFE -+# endif -+# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE) -+#else -+# define machine_is_biosafe() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MP1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MP1000 -+# endif -+# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000) -+#else -+# define machine_is_mp1000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PARSY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PARSY -+# endif -+# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY) -+#else -+# define machine_is_parsy() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CCXP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CCXP -+# endif -+# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP) -+#else -+# define machine_is_ccxp270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_GSAMPLE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE -+# endif -+# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE) -+#else -+# define machine_is_omap_gsample() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REALVIEW_EB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REALVIEW_EB -+# endif -+# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB) -+#else -+# define machine_is_realview_eb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAMOA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAMOA -+# endif -+# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA) -+#else -+# define machine_is_samoa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_T3XSCALE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_T3XSCALE -+# endif -+# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE) -+#else -+# define machine_is_t3xscale() (0) -+#endif -+ -+#ifdef CONFIG_MACH_I878 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_I878 -+# endif -+# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878) -+#else -+# define machine_is_i878() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BORZOI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BORZOI -+# endif -+# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI) -+#else -+# define machine_is_borzoi() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GECKO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GECKO -+# endif -+# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO) -+#else -+# define machine_is_gecko() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS101 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS101 -+# endif -+# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101) -+#else -+# define machine_is_ds101() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTT2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTT2 -+# endif -+# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2) -+#else -+# define machine_is_omap_palmtt2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMLD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMLD -+# endif -+# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD) -+#else -+# define machine_is_xscale_palmld() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CC9C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CC9C -+# endif -+# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C) -+#else -+# define machine_is_cc9c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SBC1670 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SBC1670 -+# endif -+# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670) -+#else -+# define machine_is_sbc1670() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXDP28X5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXDP28X5 -+# endif -+# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5) -+#else -+# define machine_is_ixdp28x5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTT -+# endif -+# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT) -+#else -+# define machine_is_omap_palmtt() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ML696K -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ML696K -+# endif -+# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K) -+#else -+# define machine_is_ml696k() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARCOM_ZEUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARCOM_ZEUS -+# endif -+# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS) -+#else -+# define machine_is_arcom_zeus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OSIRIS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OSIRIS -+# endif -+# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS) -+#else -+# define machine_is_osiris() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAESTRO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAESTRO -+# endif -+# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO) -+#else -+# define machine_is_maestro() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TUNGE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TUNGE2 -+# endif -+# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2) -+#else -+# define machine_is_tunge2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXBBM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXBBM -+# endif -+# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM) -+#else -+# define machine_is_ixbbm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX27 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX27 -+# endif -+# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27) -+#else -+# define machine_is_mx27ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AX8004 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AX8004 -+# endif -+# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004) -+#else -+# define machine_is_ax8004() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91SAM9261EK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91SAM9261EK -+# endif -+# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK) -+#else -+# define machine_is_at91sam9261ek() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LOFT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LOFT -+# endif -+# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT) -+#else -+# define machine_is_loft() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAGPIE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAGPIE -+# endif -+# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE) -+#else -+# define machine_is_magpie() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX21 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX21 -+# endif -+# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21) -+#else -+# define machine_is_mx21ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MB87M3400 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MB87M3400 -+# endif -+# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400) -+#else -+# define machine_is_mb87m3400() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MGUARD_DELTA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MGUARD_DELTA -+# endif -+# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA) -+#else -+# define machine_is_mguard_delta() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DAVINCI_DVDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DAVINCI_DVDP -+# endif -+# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP) -+#else -+# define machine_is_davinci_dvdp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCUNIVERSAL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCUNIVERSAL -+# endif -+# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL) -+#else -+# define machine_is_htcuniversal() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TPAD -+# endif -+# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD) -+#else -+# define machine_is_tpad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ROVERP3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ROVERP3 -+# endif -+# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3) -+#else -+# define machine_is_roverp3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JORNADA928 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JORNADA928 -+# endif -+# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928) -+#else -+# define machine_is_jornada928() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MV88FXX81 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MV88FXX81 -+# endif -+# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81) -+#else -+# define machine_is_mv88fxx81() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STMP36XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STMP36XX -+# endif -+# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX) -+#else -+# define machine_is_stmp36xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SXNI79524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SXNI79524 -+# endif -+# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524) -+#else -+# define machine_is_sxni79524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AMS_DELTA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AMS_DELTA -+# endif -+# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA) -+#else -+# define machine_is_ams_delta() (0) -+#endif -+ -+#ifdef CONFIG_MACH_URANIUM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_URANIUM -+# endif -+# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM) -+#else -+# define machine_is_uranium() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UCON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UCON -+# endif -+# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON) -+#else -+# define machine_is_ucon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NAS100D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NAS100D -+# endif -+# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D) -+#else -+# define machine_is_nas100d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_L083_1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_L083_1000 -+# endif -+# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000) -+#else -+# define machine_is_l083() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZX -+# endif -+# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX) -+#else -+# define machine_is_ezx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX5220 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX5220 -+# endif -+# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220) -+#else -+# define machine_is_pnx5220() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BUTTE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BUTTE -+# endif -+# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE) -+#else -+# define machine_is_butte() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SRM2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SRM2 -+# endif -+# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2) -+#else -+# define machine_is_srm2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DSBR -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DSBR -+# endif -+# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR) -+#else -+# define machine_is_dsbr() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CRYSTALBALL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CRYSTALBALL -+# endif -+# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL) -+#else -+# define machine_is_crystalball() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TINYPXA27X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TINYPXA27X -+# endif -+# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X) -+#else -+# define machine_is_tinypxa27x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HERBIE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HERBIE -+# endif -+# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE) -+#else -+# define machine_is_herbie() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAGICIAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAGICIAN -+# endif -+# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN) -+#else -+# define machine_is_magician() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM4002 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM4002 -+# endif -+# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002) -+#else -+# define machine_is_cm4002() (0) -+#endif -+ -+#ifdef CONFIG_MACH_B4 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_B4 -+# endif -+# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4) -+#else -+# define machine_is_b4() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAUI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAUI -+# endif -+# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI) -+#else -+# define machine_is_maui() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CYBERTRACKER_G -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CYBERTRACKER_G -+# endif -+# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G) -+#else -+# define machine_is_cybertracker_g() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXDKN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXDKN -+# endif -+# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN) -+#else -+# define machine_is_nxdkn() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MIO8390 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MIO8390 -+# endif -+# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390) -+#else -+# define machine_is_mio8390() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMI_BOARD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMI_BOARD -+# endif -+# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD) -+#else -+# define machine_is_omi_board() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX21CIV -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX21CIV -+# endif -+# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV) -+#else -+# define machine_is_mx21civ() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAHI_CDAC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAHI_CDAC -+# endif -+# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC) -+#else -+# define machine_is_mahi_cdac() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTX -+# endif -+# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX) -+#else -+# define machine_is_xscale_palmtx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C2413 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C2413 -+# endif -+# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413) -+#else -+# define machine_is_s3c2413() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAMSYS_EP0 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAMSYS_EP0 -+# endif -+# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0) -+#else -+# define machine_is_samsys_ep0() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WG302V1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WG302V1 -+# endif -+# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1) -+#else -+# define machine_is_wg302v1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WG302V2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WG302V2 -+# endif -+# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2) -+#else -+# define machine_is_wg302v2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EB42X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EB42X -+# endif -+# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X) -+#else -+# define machine_is_eb42x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ331ES -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ331ES -+# endif -+# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES) -+#else -+# define machine_is_iq331es() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COSYDSP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COSYDSP -+# endif -+# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP) -+#else -+# define machine_is_cosydsp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UPLAT7D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UPLAT7D -+# endif -+# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D) -+#else -+# define machine_is_uplat7d_proto() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PTDAVINCI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PTDAVINCI -+# endif -+# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI) -+#else -+# define machine_is_ptdavinci() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MBUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MBUS -+# endif -+# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS) -+#else -+# define machine_is_mbus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NADIA2VB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NADIA2VB -+# endif -+# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB) -+#else -+# define machine_is_nadia2vb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_R1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_R1000 -+# endif -+# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000) -+#else -+# define machine_is_r1000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HW90250 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HW90250 -+# endif -+# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250) -+#else -+# define machine_is_hw90250() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_2430SDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_2430SDP -+# endif -+# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP) -+#else -+# define machine_is_omap_2430sdp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DAVINCI_EVM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DAVINCI_EVM -+# endif -+# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM) -+#else -+# define machine_is_davinci_evm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_TORNADO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_TORNADO -+# endif -+# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO) -+#else -+# define machine_is_omap_tornado() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OLOCREEK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OLOCREEK -+# endif -+# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK) -+#else -+# define machine_is_olocreek() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PALMZ72 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PALMZ72 -+# endif -+# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72) -+#else -+# define machine_is_palmz72() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXDB500 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXDB500 -+# endif -+# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500) -+#else -+# define machine_is_nxdb500() (0) -+#endif -+ -+#ifdef CONFIG_MACH_APF9328 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_APF9328 -+# endif -+# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328) -+#else -+# define machine_is_apf9328() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_WIPOQ -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_WIPOQ -+# endif -+# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ) -+#else -+# define machine_is_omap_wipoq() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_TWIP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_TWIP -+# endif -+# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP) -+#else -+# define machine_is_omap_twip() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTREO650 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650 -+# endif -+# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650) -+#else -+# define machine_is_xscale_treo650() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACUMEN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACUMEN -+# endif -+# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN) -+#else -+# define machine_is_acumen() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XP100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XP100 -+# endif -+# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100) -+#else -+# define machine_is_xp100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FS2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FS2410 -+# endif -+# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410) -+#else -+# define machine_is_fs2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA270_CERF -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA270_CERF -+# endif -+# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF) -+#else -+# define machine_is_pxa270_cerf() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SQ2FTLPALM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SQ2FTLPALM -+# endif -+# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM) -+#else -+# define machine_is_sq2ftlpalm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BSEMSERVER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BSEMSERVER -+# endif -+# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER) -+#else -+# define machine_is_bsemserver() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NETCLIENT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NETCLIENT -+# endif -+# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT) -+#else -+# define machine_is_netclient() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTT5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5 -+# endif -+# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5) -+#else -+# define machine_is_xscale_palmtt5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTC -+# endif -+# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC) -+#else -+# define machine_is_xscale_palmtc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_APOLLON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_APOLLON -+# endif -+# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) -+#else -+# define machine_is_omap_apollon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARGONLVEVB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARGONLVEVB -+# endif -+# define machine_is_mxc30030evb() (machine_arch_type == MACH_TYPE_ARGONLVEVB) -+#else -+# define machine_is_mxc30030evb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REA_2D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REA_2D -+# endif -+# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D) -+#else -+# define machine_is_rea_2d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TI3E524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TI3E524 -+# endif -+# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524) -+#else -+# define machine_is_eti3e524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ATEB9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ATEB9200 -+# endif -+# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200) -+#else -+# define machine_is_ateb9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AUCKLAND -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AUCKLAND -+# endif -+# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND) -+#else -+# define machine_is_auckland() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AK3320M -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AK3320M -+# endif -+# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M) -+#else -+# define machine_is_ak3220m() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DURAMAX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DURAMAX -+# endif -+# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX) -+#else -+# define machine_is_duramax() (0) -+#endif -+ -+#ifdef CONFIG_MACH_N35 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_N35 -+# endif -+# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35) -+#else -+# define machine_is_n35() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PRONGHORN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PRONGHORN -+# endif -+# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN) -+#else -+# define machine_is_pronghorn() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FUNDY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FUNDY -+# endif -+# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY) -+#else -+# define machine_is_fundy() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LOGICPD_PXA270 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LOGICPD_PXA270 -+# endif -+# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270) -+#else -+# define machine_is_logicpd_pxa270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CPU777 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CPU777 -+# endif -+# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777) -+#else -+# define machine_is_cpu777() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIMICON9201 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIMICON9201 -+# endif -+# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201) -+#else -+# define machine_is_simicon9201() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LEAP2_HPM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LEAP2_HPM -+# endif -+# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM) -+#else -+# define machine_is_leap2_hpm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM922TXA10 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM922TXA10 -+# endif -+# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10) -+#else -+# define machine_is_cm922txa10() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA -+# endif -+# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA) -+#else -+# define machine_is_sandgate() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2 -+# endif -+# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2) -+#else -+# define machine_is_sandgate2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2G -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2G -+# endif -+# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G) -+#else -+# define machine_is_sandgate2g() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2P -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2P -+# endif -+# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P) -+#else -+# define machine_is_sandgate2p() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FRED_JACK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FRED_JACK -+# endif -+# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK) -+#else -+# define machine_is_fred_jack() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TTG_COLOR1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TTG_COLOR1 -+# endif -+# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1) -+#else -+# define machine_is_ttg_color1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXEB500HMI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXEB500HMI -+# endif -+# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI) -+#else -+# define machine_is_nxeb500hmi() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NETDCU8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NETDCU8 -+# endif -+# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8) -+#else -+# define machine_is_netdcu8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ML675050_CPU_BOA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA -+# endif -+# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA) -+#else -+# define machine_is_ml675050_cpu_boa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NG_FVX538 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NG_FVX538 -+# endif -+# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538) -+#else -+# define machine_is_ng_fvx538() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NG_FVS338 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NG_FVS338 -+# endif -+# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338) -+#else -+# define machine_is_ng_fvs338() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX4103 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX4103 -+# endif -+# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103) -+#else -+# define machine_is_pnx4103() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HESDB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HESDB -+# endif -+# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB) -+#else -+# define machine_is_hesdb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSILO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSILO -+# endif -+# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO) -+#else -+# define machine_is_xsilo() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESPRESSO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESPRESSO -+# endif -+# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO) -+#else -+# define machine_is_espresso() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMLC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMLC -+# endif -+# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC) -+#else -+# define machine_is_emlc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SISTERON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SISTERON -+# endif -+# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON) -+#else -+# define machine_is_sisteron() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RX1950 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RX1950 -+# endif -+# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950) -+#else -+# define machine_is_rx1950() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TSC_VENUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TSC_VENUS -+# endif -+# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS) -+#else -+# define machine_is_tsc_venus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS101J -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS101J -+# endif -+# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J) -+#else -+# define machine_is_ds101j() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MXC30030ADS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MXC30030ADS -+# endif -+# define machine_is_mxc30030ads() (machine_arch_type == MACH_TYPE_MXC30030ADS) -+#else -+# define machine_is_mxc30030ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC -+# endif -+# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC) -+#else -+# define machine_is_fujitsu_wimaxsoc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DUALPCMODEM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DUALPCMODEM -+# endif -+# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM) -+#else -+# define machine_is_dualpcmodem() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GESBC9312 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GESBC9312 -+# endif -+# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312) -+#else -+# define machine_is_gesbc9312() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCAPACHE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCAPACHE -+# endif -+# define machine_is_htcapache() (machine_arch_type == MACH_TYPE_HTCAPACHE) -+#else -+# define machine_is_htcapache() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXDP435 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXDP435 -+# endif -+# define machine_is_ixdp435() (machine_arch_type == MACH_TYPE_IXDP435) -+#else -+# define machine_is_ixdp435() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CATPROVT100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CATPROVT100 -+# endif -+# define machine_is_catprovt100() (machine_arch_type == MACH_TYPE_CATPROVT100) -+#else -+# define machine_is_catprovt100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOTUX1XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOTUX1XX -+# endif -+# define machine_is_picotux1xx() (machine_arch_type == MACH_TYPE_PICOTUX1XX) -+#else -+# define machine_is_picotux1xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOTUX2XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOTUX2XX -+# endif -+# define machine_is_picotux2xx() (machine_arch_type == MACH_TYPE_PICOTUX2XX) -+#else -+# define machine_is_picotux2xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DSMG600 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DSMG600 -+# endif -+# define machine_is_dsmg600() (machine_arch_type == MACH_TYPE_DSMG600) -+#else -+# define machine_is_dsmg600() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMPC2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMPC2 -+# endif -+# define machine_is_empc2() (machine_arch_type == MACH_TYPE_EMPC2) -+#else -+# define machine_is_empc2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VENTURA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VENTURA -+# endif -+# define machine_is_ventura() (machine_arch_type == MACH_TYPE_VENTURA) -+#else -+# define machine_is_ventura() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PHIDGET_SBC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PHIDGET_SBC -+# endif -+# define machine_is_phidget_sbc() (machine_arch_type == MACH_TYPE_PHIDGET_SBC) -+#else -+# define machine_is_phidget_sbc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IJ3K -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IJ3K -+# endif -+# define machine_is_ij3k() (machine_arch_type == MACH_TYPE_IJ3K) -+#else -+# define machine_is_ij3k() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PISGAH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PISGAH -+# endif -+# define machine_is_pisgah() (machine_arch_type == MACH_TYPE_PISGAH) -+#else -+# define machine_is_pisgah() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_FSAMPLE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_FSAMPLE -+# endif -+# define machine_is_omap_fsample() (machine_arch_type == MACH_TYPE_OMAP_FSAMPLE) -+#else -+# define machine_is_omap_fsample() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG720 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG720 -+# endif -+# define machine_is_sg720() (machine_arch_type == MACH_TYPE_SG720) -+#else -+# define machine_is_sg720() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REDFOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REDFOX -+# endif -+# define machine_is_redfox() (machine_arch_type == MACH_TYPE_REDFOX) -+#else -+# define machine_is_redfox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MYSH_EP9315_1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MYSH_EP9315_1 -+# endif -+# define machine_is_mysh_ep9315_1() (machine_arch_type == MACH_TYPE_MYSH_EP9315_1) -+#else -+# define machine_is_mysh_ep9315_1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TPF106 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TPF106 -+# endif -+# define machine_is_tpf106() (machine_arch_type == MACH_TYPE_TPF106) -+#else -+# define machine_is_tpf106() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91RM9200KG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91RM9200KG -+# endif -+# define machine_is_at91rm9200kg() (machine_arch_type == MACH_TYPE_AT91RM9200KG) -+#else -+# define machine_is_at91rm9200kg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SLEDB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SLEDB -+# endif -+# define machine_is_racemt2() (machine_arch_type == MACH_TYPE_SLEDB) -+#else -+# define machine_is_racemt2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ONTRACK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ONTRACK -+# endif -+# define machine_is_ontrack() (machine_arch_type == MACH_TYPE_ONTRACK) -+#else -+# define machine_is_ontrack() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PM1200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PM1200 -+# endif -+# define machine_is_pm1200() (machine_arch_type == MACH_TYPE_PM1200) -+#else -+# define machine_is_pm1200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESS24XXX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESS24XXX -+# endif -+# define machine_is_ess24562() (machine_arch_type == MACH_TYPE_ESS24XXX) -+#else -+# define machine_is_ess24562() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COREMP7 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COREMP7 -+# endif -+# define machine_is_coremp7() (machine_arch_type == MACH_TYPE_COREMP7) -+#else -+# define machine_is_coremp7() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEXCODER_6446 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEXCODER_6446 -+# endif -+# define machine_is_nexcoder_6446() (machine_arch_type == MACH_TYPE_NEXCODER_6446) -+#else -+# define machine_is_nexcoder_6446() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STVC8380 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STVC8380 -+# endif -+# define machine_is_stvc8380() (machine_arch_type == MACH_TYPE_STVC8380) -+#else -+# define machine_is_stvc8380() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TEKLYNX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TEKLYNX -+# endif -+# define machine_is_teklynx() (machine_arch_type == MACH_TYPE_TEKLYNX) -+#else -+# define machine_is_teklynx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CARBONADO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CARBONADO -+# endif -+# define machine_is_carbonado() (machine_arch_type == MACH_TYPE_CARBONADO) -+#else -+# define machine_is_carbonado() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SYSMOS_MP730 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SYSMOS_MP730 -+# endif -+# define machine_is_sysmos_mp730() (machine_arch_type == MACH_TYPE_SYSMOS_MP730) -+#else -+# define machine_is_sysmos_mp730() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SNAPPER_CL15 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SNAPPER_CL15 -+# endif -+# define machine_is_snapper_cl15() (machine_arch_type == MACH_TYPE_SNAPPER_CL15) -+#else -+# define machine_is_snapper_cl15() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PGIGIM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PGIGIM -+# endif -+# define machine_is_pgigim() (machine_arch_type == MACH_TYPE_PGIGIM) -+#else -+# define machine_is_pgigim() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PTX9160P2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PTX9160P2 -+# endif -+# define machine_is_ptx9160p2() (machine_arch_type == MACH_TYPE_PTX9160P2) -+#else -+# define machine_is_ptx9160p2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DCORE1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DCORE1 -+# endif -+# define machine_is_dcore1() (machine_arch_type == MACH_TYPE_DCORE1) -+#else -+# define machine_is_dcore1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VICTORPXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VICTORPXA -+# endif -+# define machine_is_victorpxa() (machine_arch_type == MACH_TYPE_VICTORPXA) -+#else -+# define machine_is_victorpxa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX2DTB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX2DTB -+# endif -+# define machine_is_mx2dtb() (machine_arch_type == MACH_TYPE_MX2DTB) -+#else -+# define machine_is_mx2dtb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA_IREX_ER0100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA_IREX_ER0100 -+# endif -+# define machine_is_pxa_irex_er0100() (machine_arch_type == MACH_TYPE_PXA_IREX_ER0100) -+#else -+# define machine_is_pxa_irex_er0100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMZ71 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMZ71 -+# endif -+# define machine_is_omap_palmz71() (machine_arch_type == MACH_TYPE_OMAP_PALMZ71) -+#else -+# define machine_is_omap_palmz71() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BARTEC_DEG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BARTEC_DEG -+# endif -+# define machine_is_bartec_deg() (machine_arch_type == MACH_TYPE_BARTEC_DEG) -+#else -+# define machine_is_bartec_deg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HW50251 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HW50251 -+# endif -+# define machine_is_hw50251() (machine_arch_type == MACH_TYPE_HW50251) -+#else -+# define machine_is_hw50251() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IBOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IBOX -+# endif -+# define machine_is_ibox() (machine_arch_type == MACH_TYPE_IBOX) -+#else -+# define machine_is_ibox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ATLASLH7A404 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ATLASLH7A404 -+# endif -+# define machine_is_atlaslh7a404() (machine_arch_type == MACH_TYPE_ATLASLH7A404) -+#else -+# define machine_is_atlaslh7a404() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PT2026 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PT2026 -+# endif -+# define machine_is_pt2026() (machine_arch_type == MACH_TYPE_PT2026) -+#else -+# define machine_is_pt2026() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCALPINE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCALPINE -+# endif -+# define machine_is_htcalpine() (machine_arch_type == MACH_TYPE_HTCALPINE) -+#else -+# define machine_is_htcalpine() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BARTEC_VTU -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BARTEC_VTU -+# endif -+# define machine_is_bartec_vtu() (machine_arch_type == MACH_TYPE_BARTEC_VTU) -+#else -+# define machine_is_bartec_vtu() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VCOREII -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VCOREII -+# endif -+# define machine_is_vcoreii() (machine_arch_type == MACH_TYPE_VCOREII) -+#else -+# define machine_is_vcoreii() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PDNB3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PDNB3 -+# endif -+# define machine_is_pdnb3() (machine_arch_type == MACH_TYPE_PDNB3) -+#else -+# define machine_is_pdnb3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCBEETLES -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCBEETLES -+# endif -+# define machine_is_htcbeetles() (machine_arch_type == MACH_TYPE_HTCBEETLES) -+#else -+# define machine_is_htcbeetles() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C6400 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C6400 -+# endif -+# define machine_is_s3c6400() (machine_arch_type == MACH_TYPE_S3C6400) -+#else -+# define machine_is_s3c6400() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C2443 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C2443 -+# endif -+# define machine_is_s3c2443() (machine_arch_type == MACH_TYPE_S3C2443) -+#else -+# define machine_is_s3c2443() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_LDK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_LDK -+# endif -+# define machine_is_omap_ldk() (machine_arch_type == MACH_TYPE_OMAP_LDK) -+#else -+# define machine_is_omap_ldk() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2460 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2460 -+# endif -+# define machine_is_smdk2460() (machine_arch_type == MACH_TYPE_SMDK2460) -+#else -+# define machine_is_smdk2460() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2440 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2440 -+# endif -+# define machine_is_smdk2440() (machine_arch_type == MACH_TYPE_SMDK2440) -+#else -+# define machine_is_smdk2440() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2412 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2412 -+# endif -+# define machine_is_smdk2412() (machine_arch_type == MACH_TYPE_SMDK2412) -+#else -+# define machine_is_smdk2412() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WEBBOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WEBBOX -+# endif -+# define machine_is_webbox() (machine_arch_type == MACH_TYPE_WEBBOX) -+#else -+# define machine_is_webbox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CWWNDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CWWNDP -+# endif -+# define machine_is_cwwndp() (machine_arch_type == MACH_TYPE_CWWNDP) -+#else -+# define machine_is_cwwndp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DRAGON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DRAGON -+# endif -+# define machine_is_dragon() (machine_arch_type == MACH_TYPE_DRAGON) -+#else -+# define machine_is_dragon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OPENDO_CPU_BOARD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OPENDO_CPU_BOARD -+# endif -+# define machine_is_opendo_cpu_board() (machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD) -+#else -+# define machine_is_opendo_cpu_board() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CCM2200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CCM2200 -+# endif -+# define machine_is_ccm2200() (machine_arch_type == MACH_TYPE_CCM2200) -+#else -+# define machine_is_ccm2200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ETWARM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ETWARM -+# endif -+# define machine_is_etwarm() (machine_arch_type == MACH_TYPE_ETWARM) -+#else -+# define machine_is_etwarm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_M93030 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_M93030 -+# endif -+# define machine_is_m93030() (machine_arch_type == MACH_TYPE_M93030) -+#else -+# define machine_is_m93030() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CC7U -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CC7U -+# endif -+# define machine_is_cc7u() (machine_arch_type == MACH_TYPE_CC7U) -+#else -+# define machine_is_cc7u() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MTT_RANGER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MTT_RANGER -+# endif -+# define machine_is_mtt_ranger() (machine_arch_type == MACH_TYPE_MTT_RANGER) -+#else -+# define machine_is_mtt_ranger() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEXUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEXUS -+# endif -+# define machine_is_nexus() (machine_arch_type == MACH_TYPE_NEXUS) -+#else -+# define machine_is_nexus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DESMAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DESMAN -+# endif -+# define machine_is_desman() (machine_arch_type == MACH_TYPE_DESMAN) -+#else -+# define machine_is_desman() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BKDE303 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BKDE303 -+# endif -+# define machine_is_bkde303() (machine_arch_type == MACH_TYPE_BKDE303) -+#else -+# define machine_is_bkde303() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2413 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2413 -+# endif -+# define machine_is_smdk2413() (machine_arch_type == MACH_TYPE_SMDK2413) -+#else -+# define machine_is_smdk2413() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AML_M7200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AML_M7200 -+# endif -+# define machine_is_aml_m7200() (machine_arch_type == MACH_TYPE_AML_M7200) -+#else -+# define machine_is_aml_m7200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AML_M5900 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AML_M5900 -+# endif -+# define machine_is_aml_m5900() (machine_arch_type == MACH_TYPE_AML_M5900) -+#else -+# define machine_is_aml_m5900() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG640 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG640 -+# endif -+# define machine_is_sg640() (machine_arch_type == MACH_TYPE_SG640) -+#else -+# define machine_is_sg640() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDG79524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDG79524 -+# endif -+# define machine_is_edg79524() (machine_arch_type == MACH_TYPE_EDG79524) -+#else -+# define machine_is_edg79524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AI2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AI2410 -+# endif -+# define machine_is_ai2410() (machine_arch_type == MACH_TYPE_AI2410) -+#else -+# define machine_is_ai2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXP465 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXP465 -+# endif -+# define machine_is_ixp465() (machine_arch_type == MACH_TYPE_IXP465) -+#else -+# define machine_is_ixp465() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BALLOON3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BALLOON3 -+# endif -+# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3) -+#else -+# define machine_is_balloon3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_QT2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_QT2410 -+# endif -+# define machine_is_qt2410() (machine_arch_type == MACH_TYPE_QT2410) -+#else -+# define machine_is_qt2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GTA01 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GTA01 -+# endif -+# define machine_is_gta01() (machine_arch_type == MACH_TYPE_GTA01) -+#else -+# define machine_is_gta01() (0) -+#endif -+ -+ - /* - * These have not yet been registered - */ -Index: git/include/configs/gta01.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/include/configs/gta01.h 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,233 @@ -+/* -+ * (C) Copyright 2006 Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * Configuation settings for the FIC GTA01 Linux GSM phone -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* we want to start u-boot directly from within NAND flash */ -+#define CONFIG_S3C2410_NAND_BOOT 1 -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */ -+//#define CONFIG_HWFLOW 1 -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS (\ -+ CFG_CMD_BDI | \ -+ CFG_CMD_LOADS | \ -+ CFG_CMD_LAODB | \ -+ CFG_CMD_IMI | \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_MEMORY | \ -+ CFG_CMD_ENV | \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_BOOTD | \ -+ CFG_CMD_CONSOLE | \ -+ CFG_CMD_ASKENV | \ -+ CFG_CMD_RUN | \ -+ CFG_CMD_ECHO | \ -+ CFG_CMD_I2C | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_IMMAP | \ -+ CFG_CMD_DATE | \ -+ CFG_CMD_AUTOSCRIPT | \ -+ CFG_CMD_BSP | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_MISC | \ -+ CFG_CMD_USB | \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_DIAG | \ -+ /* CFG_CMD_HWFLOW | */ \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_FAT | \ -+ CFG_CMD_EXT2 | \ -+ 0) -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" -+#define CONFIG_BOOTCOMMAND "nand read 0x32000000 0x34000 0x200000; bootm 0x32000000" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 16 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x33000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+#define CONFIG_USB_OHCI 1 -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+/* No NOR flash in this device */ -+#define CFG_NO_FLASH 1 -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+/* EXT2 driver */ -+#define CONFIG_EXT2 1 -+ -+#if 0 -+/* FAT driver in u-boot is broken currently */ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT 1 -+#endif -+ -+/* JFFS2 driver */ -+#define CONFIG_JFFS2_CMDLINE 1 -+#define CONFIG_JFFS2_NAND 1 -+#define CONFIG_JFFS2_NAND_DEV 0 -+#define CONFIG_JFFS2_NAND_OFF 0x634000 -+#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#endif -+ -+#define CONFIG_DRIVER_S3C24X0_I2C 1 -+#define CONFIG_HARD_I2C 1 -+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */ -+#define CFG_I2C_SLAVE 0x7f -+ -+/* we have a board_late_init() function */ -+#define BOARD_LATE_INIT 1 -+ -+#if 0 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#endif /* __CONFIG_H */ -Index: git/include/configs/qt2410.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ git/include/configs/qt2410.h 2007-01-04 12:21:18.000000000 +0100 -@@ -0,0 +1,245 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * Gary Jennejohn <gj@denx.de> -+ * David Mueller <d.mueller@elsoft.ch> -+ * -+ * Configuation settings for the SAMSUNG SMDK2410 board. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#if 1 -+/* If we want to start u-boot from usb bootloader in NOR flash */ -+#define CONFIG_SKIP_RELOCATE_UBOOT 1 -+#define CONFIG_SKIP_LOWLEVEL_INIT 1 -+#else -+/* If we want to start u-boot directly from within NAND flash */ -+#define CONFIG_S3C2410_NAND_BOOT 1 -+#endif -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -+#define CS8900_BASE 0x19000300 -+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ -+#define CONFIG_HWFLOW 1 -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS \ -+ (CONFIG_CMD_DFL | \ -+ CFG_CMD_BSP | \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_DATE | \ -+ CFG_CMD_DHCP | \ -+ CFG_CMD_DIAG | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_EXT2 | \ -+ CFG_CMD_FAT | \ -+ CFG_CMD_HWFLOW | \ -+ /* CFG_CMD_IDE | */ \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PING | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_USB) -+ -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" -+#define CONFIG_ETHADDR 01:ab:cd:ef:fe:dc -+#define CONFIG_NETMASK 255.255.255.0 -+#define CONFIG_IPADDR 10.0.0.110 -+#define CONFIG_SERVERIP 10.0.0.1 -+/*#define CONFIG_BOOTFILE "elinos-lart" */ -+#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 16 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x33000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+/* IDE/ATA config */ -+ -+#if 0 -+#define CFG_IDE_MAXBUS 1 -+#define CFG_IDE_MAXDEVICE 2 -+#define CFG_IDE_PREINIT 0 -+ -+#define CFG_ATA_BASE_ADDR -+#endif -+ -+#define CONFIG_USB_OHCI 1 -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ -+ -+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -+ -+#define CFG_FLASH_BASE PHYS_FLASH_1 -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -+ -+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -+#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -+#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -+ -+/* timeout values are in ticks */ -+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+#define CONFIG_EXT2 1 -+ -+/* FAT driver in u-boot is broken currently */ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT 1 -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#endif -+ -+ -+#if 0 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#endif /* __CONFIG_H */ -Index: git/include/s3c2410.h -=================================================================== ---- git.orig/include/s3c2410.h 2007-01-04 12:21:15.000000000 +0100 -+++ git/include/s3c2410.h 2007-01-04 12:21:18.000000000 +0100 -@@ -38,12 +38,6 @@ - #define S3C2410_ECCSIZE 512 - #define S3C2410_ECCBYTES 3 - --typedef enum { -- S3C24X0_UART0, -- S3C24X0_UART1, -- S3C24X0_UART2 --} S3C24X0_UARTS_NR; -- - /* S3C2410 device base addresses */ - #define S3C24X0_MEMCTL_BASE 0x48000000 - #define S3C24X0_USB_HOST_BASE 0x49000000 -@@ -65,9 +59,23 @@ - #define S3C2410_SDI_BASE 0x5A000000 - - -+#define oNFCONF 0x00 -+#define oNFCMD 0x04 -+#define oNFADDR 0x08 -+#define oNFDATA 0x0C -+#define oNFSTAT 0x10 -+#define oNFECC 0x14 -+ -+#ifndef __ASSEMBLER__ -+ - /* include common stuff */ - #include <s3c24x0.h> - -+typedef enum { -+ S3C24X0_UART0, -+ S3C24X0_UART1, -+ S3C24X0_UART2 -+} S3C24X0_UARTS_NR; - - static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void) - { -@@ -142,6 +150,7 @@ - return (S3C2410_SDI * const)S3C2410_SDI_BASE; - } - -+#endif - - /* ISR */ - #define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0)) -Index: git/include/s3c24x0.h -=================================================================== ---- git.orig/include/s3c24x0.h 2007-01-04 12:21:15.000000000 +0100 -+++ git/include/s3c24x0.h 2007-01-04 12:21:18.000000000 +0100 -@@ -637,13 +637,7 @@ - S3C24X0_REG32 SDIDCNT; - S3C24X0_REG32 SDIDSTA; - S3C24X0_REG32 SDIFSTA; --#ifdef __BIG_ENDIAN -- S3C24X0_REG8 res[3]; -- S3C24X0_REG8 SDIDAT; --#else -- S3C24X0_REG8 SDIDAT; -- S3C24X0_REG8 res[3]; --#endif -+ S3C24X0_REG32 SDIDAT; - S3C24X0_REG32 SDIIMSK; - } /*__attribute__((__packed__))*/ S3C2410_SDI; - -@@ -1123,11 +1117,7 @@ - #define rSDIDatCnt (*(volatile unsigned *)0x5A000030) - #define rSDIDatSta (*(volatile unsigned *)0x5A000034) - #define rSDIFSTA (*(volatile unsigned *)0x5A000038) --#ifdef __BIG_ENDIAN --#define rSDIDAT (*(volatile unsigned char *)0x5A00003F) --#else --#define rSDIDAT (*(volatile unsigned char *)0x5A00003C) --#endif -+#define rSDIDAT (*(volatile unsigned *)0x5A00003C) - #define rSDIIntMsk (*(volatile unsigned *)0x5A000040) - - #endif diff --git a/packages/uboot/files/uboot-20070311-tools_makefile_ln_sf.patch b/packages/uboot/files/uboot-20070311-tools_makefile_ln_sf.patch new file mode 100644 index 0000000000..e90cc0de71 --- /dev/null +++ b/packages/uboot/files/uboot-20070311-tools_makefile_ln_sf.patch @@ -0,0 +1,19 @@ +--- a/tools/Makefile 2007-03-11 00:55:44.000000000 +0000 ++++ b/tools/Makefile 2007-03-11 00:55:52.000000000 +0000 +@@ -194,14 +194,14 @@ + + $(obj)environment.c: + @rm -f $(obj)environment.c +- ln -s $(src)../common/environment.c $(obj)environment.c ++ ln -sf $(src)../common/environment.c $(obj)environment.c + + $(obj)environment.o: $(obj)environment.c + $(CC) -g $(HOST_ENVIRO_CFLAGS) $(CPPFLAGS) -c -o $@ $< + + $(obj)crc32.c: + @rm -f $(obj)crc32.c +- ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c ++ ln -sf $(src)../lib_generic/crc32.c $(obj)crc32.c + + $(LOGO_H): $(obj)bmp_logo $(LOGO_BMP) + $(obj)./bmp_logo $(LOGO_BMP) >$@ diff --git a/packages/uboot/files/uboot-eabi-fix-HACK.patch b/packages/uboot/files/uboot-eabi-fix-HACK.patch new file mode 100644 index 0000000000..65b212917d --- /dev/null +++ b/packages/uboot/files/uboot-eabi-fix-HACK.patch @@ -0,0 +1,197 @@ +Index: git/lib_arm/div0.c +=================================================================== +--- git.orig/lib_arm/div0.c ++++ git/lib_arm/div0.c +@@ -22,9 +22,3 @@ + */ + + /* Replacement (=dummy) for GNU/Linux division-by zero handler */ +-void __div0 (void) +-{ +- extern void hang (void); +- +- hang(); +-} +Index: git/board/neo1973/common/bootmenu.c +=================================================================== +--- git.orig/board/neo1973/common/bootmenu.c ++++ git/board/neo1973/common/bootmenu.c +@@ -118,3 +118,14 @@ void neo1973_bootmenu(void) + bootmenu_add("Factory reset", factory_reset, NULL); + bootmenu(); + } ++ ++void raise() ++{ ++ serial_printf( "*** something's wrong... please reset ***\n" ); ++} ++ ++void abort() ++{ ++ serial_printf( "*** something's wrong... please reset ***\n" ); ++} ++ +Index: git/board/neo1973/gta01/u-boot.lds +=================================================================== +--- git.orig/board/neo1973/gta01/u-boot.lds ++++ git/board/neo1973/gta01/u-boot.lds +@@ -39,6 +39,10 @@ SECTIONS + + . = ALIGN(4); + .rodata : { *(.rodata) } ++ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } ++ __exidx_start = .; ++ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } ++ __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } +Index: git/board/neo1973/gta02/u-boot.lds +=================================================================== +--- git.orig/board/neo1973/gta02/u-boot.lds ++++ git/board/neo1973/gta02/u-boot.lds +@@ -39,6 +39,10 @@ SECTIONS + + . = ALIGN(4); + .rodata : { *(.rodata) } ++ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } ++ __exidx_start = .; ++ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } ++ __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } +Index: git/board/neo1973/common/lowlevel_foo.lds +=================================================================== +--- git.orig/board/neo1973/common/lowlevel_foo.lds ++++ git/board/neo1973/common/lowlevel_foo.lds +@@ -37,6 +37,10 @@ SECTIONS + + . = ALIGN(4); + .rodata : { *(.rodata) } ++ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } ++ __exidx_start = .; ++ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } ++ __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } +Index: git/board/hxd8/hxd8.c +=================================================================== +--- git.orig/board/hxd8/hxd8.c ++++ git/board/hxd8/hxd8.c +@@ -187,3 +187,6 @@ unsigned int dynpart_size[] = { + char *dynpart_names[] = { + "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; + ++void raise() {} ++ ++void abort() {} +Index: git/board/hxd8/u-boot.lds +=================================================================== +--- git.orig/board/hxd8/u-boot.lds ++++ git/board/hxd8/u-boot.lds +@@ -39,6 +39,10 @@ SECTIONS + + . = ALIGN(4); + .rodata : { *(.rodata) } ++ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } ++ __exidx_start = .; ++ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } ++ __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } +Index: git/board/hxd8/lowlevel_foo.lds +=================================================================== +--- git.orig/board/hxd8/lowlevel_foo.lds ++++ git/board/hxd8/lowlevel_foo.lds +@@ -37,6 +37,10 @@ SECTIONS + + . = ALIGN(4); + .rodata : { *(.rodata) } ++ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } ++ __exidx_start = .; ++ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } ++ __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } +Index: git/board/qt2410/qt2410.c +=================================================================== +--- git.orig/board/qt2410/qt2410.c ++++ git/board/qt2410/qt2410.c +@@ -156,3 +156,7 @@ unsigned int dynpart_size[] = { + char *dynpart_names[] = { + "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; + ++void raise() {} ++ ++void abort() {} ++ +Index: git/board/qt2410/u-boot.lds +=================================================================== +--- git.orig/board/qt2410/u-boot.lds ++++ git/board/qt2410/u-boot.lds +@@ -39,6 +39,10 @@ SECTIONS + + . = ALIGN(4); + .rodata : { *(.rodata) } ++ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } ++ __exidx_start = .; ++ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } ++ __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } +Index: git/Makefile +=================================================================== +--- git.orig/Makefile ++++ git/Makefile +@@ -225,7 +225,7 @@ LIBS := $(addprefix $(obj),$(LIBS)) + .PHONY : $(LIBS) + + # Add GCC lib +-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc ++PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc -lgcc_eh + + # The "tools" are needed early, so put this first + # Don't include stuff already done in $(LIBS) +Index: git/board/smdk2440/smdk2440.c +=================================================================== +--- git.orig/board/smdk2440/smdk2440.c ++++ git/board/smdk2440/smdk2440.c +@@ -150,3 +150,6 @@ char *dynpart_names[] = { + "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; + + ++void raise() {} ++void abort() {} ++ +Index: git/board/smdk2440/u-boot.lds +=================================================================== +--- git.orig/board/smdk2440/u-boot.lds ++++ git/board/smdk2440/u-boot.lds +@@ -39,6 +39,10 @@ SECTIONS + + . = ALIGN(4); + .rodata : { *(.rodata) } ++ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } ++ __exidx_start = .; ++ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } ++ __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } +Index: git/board/neo1973/gta02/gta02.c +=================================================================== +--- git.orig/board/neo1973/gta02/gta02.c ++++ git/board/neo1973/gta02/gta02.c +@@ -321,3 +321,7 @@ int neo1973_set_charge_mode(enum neo1973 + /* FIXME */ + return 0; + } ++ ++void raise() {} ++void abort() {} ++ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/.mtn2git_empty b/packages/uboot/u-boot-mkimage-gta01-native/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/.mtn2git_empty +++ /dev/null diff --git a/packages/uboot/u-boot-mkimage-gta01-native/bbt-create-optional.patch b/packages/uboot/u-boot-mkimage-gta01-native/bbt-create-optional.patch deleted file mode 100644 index d7a2a872e5..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/bbt-create-optional.patch +++ /dev/null @@ -1,52 +0,0 @@ -This patch makes creation of the BBT optional for the s3c24x0 platform. -It adds: - -- a new platform-independent NAND-wide flag NAND_DONT_CREATE_BBT -- one user of this flag, namely s3c24x0 - -Experimental. - -- Werner Almesberger <werner@openmoko.org> - - -Index: u-boot/cpu/arm920t/s3c24x0/nand.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c 2007-02-16 23:53:29.000000000 +0100 -+++ u-boot/cpu/arm920t/s3c24x0/nand.c 2007-02-16 23:53:54.000000000 +0100 -@@ -169,7 +169,7 @@ - - nand->eccmode = NAND_ECC_SOFT; - #ifdef CONFIG_S3C2410_NAND_BBT -- nand->options = NAND_USE_FLASH_BBT; -+ nand->options = NAND_USE_FLASH_BBT | NAND_DONT_CREATE_BBT; - #else - nand->options = 0; - #endif -Index: u-boot/drivers/nand/nand_bbt.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_bbt.c 2007-02-16 23:53:36.000000000 +0100 -+++ u-boot/drivers/nand/nand_bbt.c 2007-02-16 23:53:54.000000000 +0100 -@@ -678,7 +678,8 @@ - } - create: - /* Create the bad block table by scanning the device ? */ -- if (!(td->options & NAND_BBT_CREATE)) -+ if (!(td->options & NAND_BBT_CREATE) || -+ (this->options & NAND_DONT_CREATE_BBT)) - continue; - - /* Create the table in memory by scanning the chip(s) */ -Index: u-boot/include/linux/mtd/nand.h -=================================================================== ---- u-boot.orig/include/linux/mtd/nand.h 2007-02-16 23:53:08.000000000 +0100 -+++ u-boot/include/linux/mtd/nand.h 2007-02-16 23:53:54.000000000 +0100 -@@ -187,7 +187,8 @@ - * This can only work if we have the ecc bytes directly behind the - * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ - #define NAND_HWECC_SYNDROME 0x00020000 -- -+/* Do not create an BBT if none is found. Overrides NAND_BBT_CREATE. */ -+#define NAND_DONT_CREATE_BBT 0x00040000 - - /* Options set by nand scan */ - /* Nand scan has allocated oob_buf */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/bbt-scan-second.patch b/packages/uboot/u-boot-mkimage-gta01-native/bbt-scan-second.patch deleted file mode 100644 index 37b2807908..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/bbt-scan-second.patch +++ /dev/null @@ -1,69 +0,0 @@ -Scan also the second OOB page for bad block information. - -board/neo1973/gta01/nand.c (board_nand_init): added board-specific badblock - pattern which sets NAND_BBT_SCAN2NDPAGE -drivers/nand/nand_base.c (nand_block_bad): also consider the second page in a - block if NAND_BBT_SCAN2NDPAGE is set - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/board/neo1973/gta01/nand.c -=================================================================== ---- u-boot.orig/board/neo1973/gta01/nand.c -+++ u-boot/board/neo1973/gta01/nand.c -@@ -113,9 +113,23 @@ - } - - -+/* Derived from drivers/nand/nand_bbt.c:smallpage_flashbased */ -+ -+static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; -+ -+static struct nand_bbt_descr badblock_pattern = { -+ .options = -+ NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES | NAND_BBT_SCAN2NDPAGE, -+ .offs = 5, -+ .len = 1, -+ .pattern = scan_ff_pattern -+}; -+ -+ - int board_nand_init(struct nand_chip *nand) - { - nand->read_otp = samsung_nand_read_otp; - nand->write_otp = samsung_nand_write_otp; -+ nand->badblock_pattern = &badblock_pattern; - return s3c24x0_nand_init(nand); - } -Index: u-boot/drivers/nand/nand_base.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_base.c -+++ u-boot/drivers/nand/nand_base.c -@@ -421,7 +421,7 @@ - * - * Check, if the block is bad. - */ --static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) -+static int nand_block_bad_page(struct mtd_info *mtd, loff_t ofs, int getchip) - { - int page, chipnr, res = 0; - struct nand_chip *this = mtd->priv; -@@ -460,6 +460,18 @@ - return res; - } - -+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ if (nand_block_bad_page(mtd, ofs, getchip)) -+ return 1; -+ if (this->badblock_pattern->options & NAND_BBT_SCAN2NDPAGE && -+ nand_block_bad_page(mtd, ofs+(1 << this->page_shift), getchip)) -+ return 1; -+ return 0; -+} -+ - /** - * nand_default_block_markbad - [DEFAULT] mark a block bad - * @mtd: MTD device structure diff --git a/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-and-nand.patch b/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-and-nand.patch deleted file mode 100644 index fa0de39ab7..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-and-nand.patch +++ /dev/null @@ -1,98 +0,0 @@ -Auto-detect whether we're booting from RAM or NAND, and act accordingly. This -allows us to use the same u-boot binary for all boot modes. - -include/configs/neo1973.h: introduced new config option - CONFIG_LL_INIT_NAND_ONLY to perform low-level initialization only when - booting from NAND -include/configs/neo1973.h: got rid of BUILD_FOR_RAM -cpu/arm920t/start.S: detect if we need to boot from NAND at run time (i.e., if - we're running at address 0) - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S -+++ u-boot/cpu/arm920t/start.S -@@ -157,18 +157,26 @@ - str r1, [r0] - #endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ - -- /* -- * we do sys-critical inits only at reboot, -- * not when booting from ram! -- */ - #ifndef CONFIG_SKIP_LOWLEVEL_INIT -+#ifndef CONFIG_LL_INIT_NAND_ONLY - bl cpu_init_crit - #endif -+#endif - - #ifndef CONFIG_SKIP_RELOCATE_UBOOT --#ifndef CONFIG_S3C2410_NAND_BOOT --relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ -+ -+#ifdef CONFIG_S3C2410_NAND_BOOT -+ /* are we running from NAND ? */ -+#define BWSCON 0x48000000 -+ ldr r1, =BWSCON /* Z = CPU booted from NAND */ -+ ldr r1, [r1] -+ tst r1, #6 /* BWSCON[2:1] = OM[1:0] */ -+ teqeq r0, #0 /* Z &= running at address 0 */ -+ beq nand_load -+#endif /* CONFIG_S3C2410_NAND_BOOT */ -+ -+relocate: /* relocate U-Boot to RAM */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq done_relocate -@@ -188,10 +196,13 @@ - ldr pc, _done_relocate /* jump to relocated code */ - _done_relocate: - .word done_relocate --done_relocate: --#else /* NAND_BOOT */ --relocate: --copy_myself: -+ -+#ifdef CONFIG_S3C2410_NAND_BOOT -+nand_load: -+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY) -+ bl cpu_init_crit -+#endif -+ - /* mov r10, lr */ - - @ reset NAND -@@ -275,7 +286,8 @@ - #endif - 1: b 1b - done_nand_read: --#endif /* NAND_BOOT */ -+#endif /* CONFIG_S3C2410_NAND_BOOT */ -+done_relocate: - #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -26,14 +26,10 @@ - #ifndef __CONFIG_H - #define __CONFIG_H - --#if defined(BUILD_FOR_RAM) --/* If we want to start u-boot from inside RAM */ --#define CONFIG_SKIP_LOWLEVEL_INIT 1 --#else --/* we want to start u-boot directly from within NAND flash */ -+/* we want to be able to start u-boot directly from within NAND flash */ -+#define CONFIG_LL_INIT_NAND_ONLY - #define CONFIG_S3C2410_NAND_BOOT 1 - #define CONFIG_S3C2410_NAND_SKIP_BAD 1 --#endif - - #define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-reloc.patch b/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-reloc.patch deleted file mode 100644 index 53a3e05c67..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-reloc.patch +++ /dev/null @@ -1,62 +0,0 @@ -This patch allows us to boot from anywhere in RAM. It mainly sets the stage -for later patches. The only real changes here is the better handling of already -cached code (e.g., if we were started by a previous instance of u-boot), and -that we drop CONFIG_SKIP_RELOCATE_UBOOT from neo1973.h - -cpu/arm920t/start.S: if not relocating, instead of going straight to - stack_setup, jump to done_relocate, which may perform other setup tasks -cpu/arm920t/start.S: after relocating, flush the cache and jump to the new code -include/configs/neo1973.h: remove CONFIG_SKIP_RELOCATE_UBOOT - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S -+++ u-boot/cpu/arm920t/start.S -@@ -171,7 +171,7 @@ relocate: /* relocate U-Boot to RAM - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ -- beq stack_setup -+ beq done_relocate - - ldr r2, _armboot_start - ldr r3, _bss_start -@@ -181,8 +181,14 @@ relocate: /* relocate U-Boot to RAM - copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ -- cmp r0, r2 /* until source end addreee [r2] */ -+ cmp r0, r2 /* until source end address [r2] */ - ble copy_loop -+ mov r0, #0 /* flush v3/v4 cache */ -+ mcr p15, 0, r0, c7, c7, 0 -+ ldr pc, _done_relocate /* jump to relocated code */ -+_done_relocate: -+ .word done_relocate -+done_relocate: - #else /* NAND_BOOT */ - relocate: - copy_myself: -@@ -270,7 +276,7 @@ notmatch: - 1: b 1b - done_nand_read: - #endif /* NAND_BOOT */ --#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ -+#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ - stack_setup: -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -28,7 +28,6 @@ - - #if defined(BUILD_FOR_RAM) - /* If we want to start u-boot from inside RAM */ --#define CONFIG_SKIP_RELOCATE_UBOOT 1 - #define CONFIG_SKIP_LOWLEVEL_INIT 1 - #else - /* we want to start u-boot directly from within NAND flash */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/boot-menu.patch b/packages/uboot/u-boot-mkimage-gta01-native/boot-menu.patch deleted file mode 100644 index 352967ae06..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/boot-menu.patch +++ /dev/null @@ -1,769 +0,0 @@ -board/neo1973/bootmenu.c: simple configurable boot menu -board/neo1973/neo1973.c (neo1973_new_second): return 1 if a new second has - started since the last call -board/neo1973/neo1973.c (neo1973_on_key_pressed): return 1 if the $POWER key is - pressed -board/neo1973/neo1973.c (board_late_init): make use of neo1973_new_second and - neo1973_on_key_pressed -board/neo1973/neo1973.h: added function prototypes -u-boot/board/neo1973/neo1973.c (board_late_init): enter the boot menu when - "AUX" was pressed at least half the time -u-boot/board/neo1973/neo1973.c (board_late_init): minor code cleanup -u-boot/common/console.c, include/console.h: added "console_poll_hook" to be - called when waiting for console in put in "getc" and "tstc" -board/neo1973/neo1973.c (board_late_init): poll for the boot menu also on RAM - boot, reset, or unknown cause -board/neo1973/neo1973.c (board_late_init): don't look for the power key if - woken up by the charger -board/neo1973/neo1973.h, board/neo1973/neo1973.c, board/neo1973/bootmenu.c: - renamed neo1973_911_key_pressed to neo1973_aux_key_pressed - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/board/neo1973/common/bootmenu.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/bootmenu.c -@@ -0,0 +1,120 @@ -+/* -+ * bootmenu.c - Boot menu -+ * -+ * Copyright (C) 2006-2007 by OpenMoko, Inc. -+ * Written by Werner Almesberger <werner@openmoko.org> -+ * All Rights Reserved -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -+ */ -+ -+ -+#include <common.h> -+#include <environment.h> -+#include <bootmenu.h> -+#include <asm/atomic.h> -+ -+#ifdef CONFIG_USBD_DFU -+#include "usbdcore.h" -+#include "usb_dfu.h" -+#endif -+ -+#include "neo1973.h" -+ -+ -+#define DEBOUNCE_LOOPS 1000 /* wild guess */ -+ -+ -+static int debounce(int (*fn)(void), int *last) -+{ -+ int on, i; -+ -+again: -+ on = fn(); -+ if (on != *last) -+ for (i = DEBOUNCE_LOOPS; i; i--) -+ if (on != fn()) -+ goto again; -+ *last = on; -+ return on; -+} -+ -+ -+static int aux_key(void *user) -+{ -+ static int last_aux = -1; -+ -+ return debounce(neo1973_aux_key_pressed, &last_aux); -+} -+ -+ -+static int on_key(void *user) -+{ -+ static int last_on = -1; -+ -+ return debounce(neo1973_on_key_pressed, &last_on); -+} -+ -+ -+static void factory_reset(void *user) -+{ -+ default_env(); -+ run_command("dynpart", 0); -+ run_command("bootd", 0); -+} -+ -+ -+static int seconds(void *user) -+{ -+ return neo1973_new_second(); -+} -+ -+ -+static int system_idle(void) -+{ -+#ifdef CONFIG_USBD_DFU -+ if (system_dfu_state) -+ return *system_dfu_state == DFU_STATE_appIDLE; -+#endif -+ return 1; -+} -+ -+ -+static void poweroff_if_idle(void *user) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ if (system_idle()) -+ neo1973_poweroff(); -+ local_irq_restore(flags); -+} -+ -+ -+static struct bootmenu_setup bootmenu_setup = { -+ .next_key = aux_key, -+ .enter_key = on_key, -+ .seconds = seconds, -+ .idle_action = poweroff_if_idle, -+}; -+ -+ -+void neo1973_bootmenu(void) -+{ -+ bootmenu_add("Boot", NULL, "bootd"); -+ bootmenu_init(&bootmenu_setup); -+ bootmenu_add("Factory reset", factory_reset, NULL); -+ bootmenu(); -+} -Index: u-boot/board/neo1973/gta01/gta01.c -=================================================================== ---- u-boot.orig/board/neo1973/gta01/gta01.c -+++ u-boot/board/neo1973/gta01/gta01.c -@@ -229,10 +229,15 @@ int board_late_init(void) - extern unsigned char booted_from_nand; - unsigned char tmp; - char buf[32]; -+ int menu_vote = 0; /* <= 0: no, > 0: yes */ -+ int seconds = 0; - - /* Initialize the Power Management Unit with a safe register set */ - pcf50606_init(); - -+ /* if there's no other reason, must be regular reset */ -+ neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; -+ - if (!booted_from_nand) - goto woken_by_reset; - -@@ -242,45 +247,41 @@ int board_late_init(void) - setenv("pcf50606_int1", buf); - - if (tmp & PCF50606_INT1_ALARM) { -- /* we've been woken up by RTC alarm or charger insert, boot */ -+ /* we've been woken up by RTC alarm, boot */ - neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM; - goto continue_boot; - } - if (tmp & PCF50606_INT1_EXTONR) { -+ /* we've been woken up by charger insert */ - neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER; - } - - if (tmp & PCF50606_INT1_ONKEYF) { -- int seconds = 0; -- neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; - /* we've been woken up by a falling edge of the onkey */ -+ neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; -+ } - -- /* we can't just setenv(bootdelay,-1) because that would -- * accidentially become permanent if the user does saveenv */ -- if (neo1973_911_key_pressed()) -- nobootdelay = 1; -- -- while (1) { -- u_int8_t int1, oocs; -- -- oocs = pcf50606_reg_read(PCF50606_REG_OOCS); -- if (oocs & PFC50606_OOCS_ONKEY) -- break; -- -- int1 = pcf50606_reg_read(PCF50606_REG_INT1); -- if (int1 & PCF50606_INT1_SECOND) -- seconds++; -- -- if (seconds >= POWER_KEY_SECONDS) -- goto continue_boot; -- } -- /* Power off if minimum number of seconds not reached */ -- neo1973_poweroff(); -+ if (neo1973_wakeup_cause == NEO1973_WAKEUP_CHARGER) { -+ /* if we still think it was only a charger insert, boot */ -+ goto continue_boot; - } - - woken_by_reset: -- /* if there's no other reason, must be regular reset */ -- neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; -+ -+ while (neo1973_wakeup_cause == NEO1973_WAKEUP_RESET || -+ neo1973_on_key_pressed()) { -+ if (neo1973_aux_key_pressed()) -+ menu_vote++; -+ else -+ menu_vote--; -+ -+ if (neo1973_new_second()) -+ seconds++; -+ if (seconds >= POWER_KEY_SECONDS) -+ goto continue_boot; -+ } -+ /* Power off if minimum number of seconds not reached */ -+ neo1973_poweroff(); - - continue_boot: - jbt6k74_init(); -@@ -304,6 +305,11 @@ continue_boot: - } - #endif - -+ if (menu_vote > 0) { -+ neo1973_bootmenu(); -+ nobootdelay = 1; -+ } -+ - return 0; - } - -@@ -369,7 +375,17 @@ void neo1973_vibrator(int on) - #endif - } - --int neo1973_911_key_pressed(void) -+int neo1973_new_second(void) -+{ -+ return pcf50606_reg_read(PCF50606_REG_INT1) & PCF50606_INT1_SECOND; -+} -+ -+int neo1973_on_key_pressed(void) -+{ -+ return !(pcf50606_reg_read(PCF50606_REG_OOCS) & PFC50606_OOCS_ONKEY); -+} -+ -+int neo1973_aux_key_pressed(void) - { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); - if (gpio->GPFDAT & (1 << 6)) -Index: u-boot/board/neo1973/gta01/Makefile -=================================================================== ---- u-boot.orig/board/neo1973/gta01/Makefile -+++ u-boot/board/neo1973/gta01/Makefile -@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk - - LIB = lib$(BOARD).a - --OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o -+OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o - SOBJS := ../common/lowlevel_init.o - - .PHONY: all -Index: u-boot/board/neo1973/common/neo1973.h -=================================================================== ---- u-boot.orig/board/neo1973/common/neo1973.h -+++ u-boot/board/neo1973/common/neo1973.h -@@ -29,4 +29,10 @@ int neo1973_911_key_pressed(void); - const char *neo1973_get_charge_status(void); - int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd); - -+int neo1973_new_second(void); -+int neo1973_on_key_pressed(void); -+int neo1973_aux_key_pressed(void); -+ -+void neo1973_bootmenu(void); -+ - #endif -Index: u-boot/common/console.c -=================================================================== ---- u-boot.orig/common/console.c -+++ u-boot/common/console.c -@@ -160,8 +160,12 @@ void fprintf (int file, const char *fmt, - - /** U-Boot INITIAL CONSOLE-COMPATIBLE FUNCTION *****************************/ - -+void (*console_poll_hook)(int activity); -+ - int getc (void) - { -+ while (console_poll_hook && !tstc()); -+ - if (gd->flags & GD_FLG_DEVINIT) { - /* Get from the standard input */ - return fgetc (stdin); -@@ -171,7 +175,7 @@ int getc (void) - return serial_getc (); - } - --int tstc (void) -+static int do_tstc (void) - { - if (gd->flags & GD_FLG_DEVINIT) { - /* Test the standard input */ -@@ -182,6 +186,16 @@ int tstc (void) - return serial_tstc (); - } - -+int tstc (void) -+{ -+ int ret; -+ -+ ret = do_tstc(); -+ if (console_poll_hook) -+ console_poll_hook(ret); -+ return ret; -+} -+ - void putc (const char c) - { - #ifdef CONFIG_SILENT_CONSOLE -Index: u-boot/include/console.h -=================================================================== ---- u-boot.orig/include/console.h -+++ u-boot/include/console.h -@@ -33,6 +33,8 @@ - extern device_t *stdio_devices[] ; - extern char *stdio_names[MAX_FILES] ; - -+extern void (*console_poll_hook)(int activity); -+ - int console_realloc(int top); - - #endif -Index: u-boot/common/Makefile -=================================================================== ---- u-boot.orig/common/Makefile -+++ u-boot/common/Makefile -@@ -50,7 +50,8 @@ COBJS = main.o ACEX1K.o altera.o bedbug. - memsize.o miiphybb.o miiphyutil.o \ - s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \ - usb.o usb_kbd.o usb_storage.o \ -- virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o -+ virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o \ -+ bootmenu.o - - SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) - OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) -Index: u-boot/common/bootmenu.c -=================================================================== ---- /dev/null -+++ u-boot/common/bootmenu.c -@@ -0,0 +1,311 @@ -+/* -+ * bootmenu.c - Boot menu -+ * -+ * Copyright (C) 2006-2007 by OpenMoko, Inc. -+ * Written by Werner Almesberger <werner@openmoko.org> -+ * All Rights Reserved -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -+ */ -+ -+ -+#include <common.h> -+ -+#ifdef CFG_BOOTMENU -+ -+#include <malloc.h> -+#include <devices.h> -+#include <console.h> -+#include <bootmenu.h> -+ -+ -+extern const char version_string[]; -+ -+ -+#define ANSI_CLEAR "\e[2J" -+#define ANSI_REVERSE "\e[7m" -+#define ANSI_NORMAL "\e[m" -+#define ANSI_GOTOYX "\e[%d;%dH" -+ -+/* -+ * MIN_BOOT_MENU_TIMEOUT ensures that users can't by accident set the timeout -+ * unusably short. -+ */ -+#define MIN_BOOT_MENU_TIMEOUT 10 /* 10 seconds */ -+#define BOOT_MENU_TIMEOUT 60 /* 60 seconds */ -+#define AFTER_COMMAND_WAIT 3 /* wait (2,3] after running commands */ -+#define MAX_MENU_ITEMS 10 /* cut off after that many */ -+ -+#define TOP_ROW 2 -+#define MENU_0_ROW (TOP_ROW+5) -+ -+ -+struct option { -+ const char *label; -+ void (*fn)(void *user); /* run_command if NULL */ -+ void *user; -+}; -+ -+ -+static const struct bootmenu_setup *setup; -+static struct option options[MAX_MENU_ITEMS]; -+static int num_options = 0; -+static int max_width = 0; -+ -+static device_t *bm_con; -+ -+ -+static void bm_printf(const char *fmt, ...) -+{ -+ va_list args; -+ char printbuffer[CFG_PBSIZE]; -+ -+ va_start(args, fmt); -+ vsprintf(printbuffer, fmt, args); -+ va_end(args); -+ -+ bm_con->puts(printbuffer); -+} -+ -+ -+static char *get_option(int n) -+{ -+ char name[] = "menu_XX"; -+ -+ sprintf(name+5, "%d", n); -+ return getenv(name); -+} -+ -+ -+static void print_option(const struct option *option, int reverse) -+{ -+ int n = option-options; -+ -+ bm_printf(ANSI_GOTOYX, MENU_0_ROW+n, 1); -+ if (reverse) -+ bm_printf(ANSI_REVERSE); -+ bm_printf(" %-*s ", max_width, option->label); -+ if (reverse) -+ bm_printf(ANSI_NORMAL); -+} -+ -+ -+static int get_var_positive_int(char *var, int default_value) -+{ -+ const char *s; -+ char *end; -+ int n; -+ -+ s = getenv(var); -+ if (!s) -+ return default_value; -+ n = simple_strtoul(s, &end, 0); -+ if (!*s || *end || n < 1) -+ return default_value; -+ return n; -+} -+ -+ -+static void show_bootmenu(void) -+{ -+ const struct option *option; -+ -+ bm_printf(ANSI_CLEAR ANSI_GOTOYX "%s", TOP_ROW, 1, version_string); -+ bm_printf(ANSI_GOTOYX "*** BOOT MENU ***", TOP_ROW+3, 1); -+ bm_printf(ANSI_GOTOYX, MENU_0_ROW, 1); -+ -+ for (option = options; option != options+num_options; option++) -+ print_option(option, option == options); -+ -+ bm_printf("\n\nPress [AUX] to select, [POWER] to execute.\n"); -+} -+ -+ -+static void redirect_console(int grab) -+{ -+ static device_t *orig_stdout, *orig_stderr; -+ -+ if (grab) { -+ orig_stdout = stdio_devices[stdout]; -+ orig_stderr = stdio_devices[stderr]; -+ stdio_devices[stdout] = bm_con; -+ stdio_devices[stderr] = bm_con; -+ } -+ else { -+ /* -+ * Make this conditional, because the command may also change -+ * the console. -+ */ -+ if (stdio_devices[stdout] == bm_con) -+ stdio_devices[stdout] = orig_stdout; -+ if (stdio_devices[stderr] == bm_con) -+ stdio_devices[stderr] = orig_stderr; -+ } -+} -+ -+ -+static void do_option(const struct option *option) -+{ -+ int seconds, aux; -+ -+ bm_printf(ANSI_CLEAR ANSI_GOTOYX, 1, 1); -+ redirect_console(1); -+ -+ if (option->fn) -+ option->fn(option->user); -+ else -+ run_command(option->user, 0); -+ -+ redirect_console(0); -+ seconds = get_var_positive_int("after_command_wait", -+ AFTER_COMMAND_WAIT); -+ if (seconds) -+ bm_printf("\nPress [AUX] to %s.", -+ option ? "return to boot menu" : "power off"); -+ aux = 1; /* require up-down transition */ -+ while (seconds) { -+ int tmp; -+ -+ tmp = setup->next_key(setup->user); -+ if (tmp && !aux) -+ break; -+ aux = tmp; -+ if (setup->seconds(setup->user)) -+ seconds--; -+ } -+ if (!option) -+ setup->idle_action(setup->idle_action); -+ show_bootmenu(); -+} -+ -+ -+static void bootmenu_hook(int activity) -+{ -+ static int aux = 1, on = 1; -+ static const struct option *option = options; -+ static int seconds = 0; -+ int tmp; -+ -+ if (activity) -+ seconds = 0; -+ tmp = setup->next_key(setup->user); -+ if (tmp && !aux) { -+ print_option(option, 0); -+ option++; -+ if (option == options+num_options) -+ option = options; -+ print_option(option, 1); -+ seconds = 0; -+ } -+ aux = tmp; -+ tmp = setup->enter_key(setup->user); -+ if (tmp && !on) { -+ do_option(option); -+ option = options; -+ seconds = 0; -+ } -+ on = tmp; -+ if (setup->seconds(setup->user)) { -+ int timeout; -+ -+ timeout = get_var_positive_int("boot_menu_timeout", -+ BOOT_MENU_TIMEOUT); -+ if (timeout < MIN_BOOT_MENU_TIMEOUT) -+ timeout = MIN_BOOT_MENU_TIMEOUT; -+ if (++seconds > timeout) { -+ setup->idle_action(setup->idle_action); -+ seconds = 0; -+ } -+ } -+} -+ -+ -+static device_t *find_console(const char *name) -+{ -+ int i; -+ -+ for (i = 1; i != ListNumItems(devlist); i++) { -+ device_t *dev = ListGetPtrToItem(devlist, i); -+ -+ if (!strcmp(name, dev->name)) -+ if (dev->flags & DEV_FLAGS_OUTPUT) -+ return dev; -+ } -+ return NULL; -+} -+ -+ -+void bootmenu_add(const char *label, void (*fn)(void *user), void *user) -+{ -+ int len; -+ -+ options[num_options].label = label; -+ options[num_options].fn = fn; -+ options[num_options].user = user; -+ num_options++; -+ -+ len = strlen(label); -+ if (len > max_width) -+ max_width = len; -+} -+ -+ -+void bootmenu_init(struct bootmenu_setup *__setup) -+{ -+ int n; -+ -+ setup = __setup; -+ for (n = 1; n != MAX_MENU_ITEMS+1; n++) { -+ const char *spec, *colon; -+ -+ spec = get_option(n); -+ if (!spec) -+ continue; -+ colon = strchr(spec, ':'); -+ if (!colon) -+ bootmenu_add(spec, NULL, (char *) spec); -+ else { -+ char *label; -+ int len = colon-spec; -+ -+ label = malloc(len+1); -+ if (!label) -+ return; -+ memcpy(label, spec, len); -+ label[len] = 0; -+ bootmenu_add(label, NULL, (char *) colon+1); -+ } -+ } -+} -+ -+ -+void bootmenu(void) -+{ -+ bm_con = find_console("vga"); -+ if (bm_con && bm_con->start && bm_con->start() < 0) -+ bm_con = NULL; -+ if (!bm_con) -+ bm_con = stdio_devices[stdout]; -+ if (!bm_con) -+ return; -+#if 0 -+ console_assign(stdout, "vga"); -+ console_assign(stderr, "vga"); -+#endif -+ show_bootmenu(); -+ console_poll_hook = bootmenu_hook; -+} -+ -+#endif /* CFG_BOOTMENU */ -Index: u-boot/include/bootmenu.h -=================================================================== ---- /dev/null -+++ u-boot/include/bootmenu.h -@@ -0,0 +1,71 @@ -+/* -+ * bootmenu.h - Boot menu -+ * -+ * Copyright (C) 2006-2007 by OpenMoko, Inc. -+ * Written by Werner Almesberger <werner@openmoko.org> -+ * All Rights Reserved -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -+ */ -+ -+#ifndef BOOTMENU_H -+#define BOOTMENU_H -+ -+#define MIN_BOOT_MENU_TIMEOUT 10 /* 10 seconds */ -+#define BOOT_MENU_TIMEOUT 60 /* 60 seconds */ -+#define AFTER_COMMAND_WAIT 3 /* wait (2,3] after running commands */ -+#define MAX_MENU_ITEMS 10 /* cut off after that many */ -+ -+ -+struct bootmenu_setup { -+ /* non-zero while the "next" key is being pressed */ -+ int (*next_key)(void *user); -+ -+ /* non-zero while the "enter" key is being pressed */ -+ int (*enter_key)(void *user); -+ -+ /* return the number of seconds that have passed since the last call -+ to "seconds". It's okay to limit the range to [0, 1]. */ -+ int (*seconds)(void *user); -+ -+ /* action to take if the boot menu times out */ -+ void (*idle_action)(void *user); -+ -+ /* user-specific data, passes "as is" to the functions above */ -+ void *user; -+}; -+ -+ -+/* -+ * Initialize the menu from the environment. -+ */ -+ -+void bootmenu_init(struct bootmenu_setup *setup); -+ -+/* -+ * To add entries on top of the boot menu, call bootmenu_add before -+ * bootmenu_init. To add entries at the end, call it after bootmenu_init. -+ * If "fn" is NULL, the command specified in "user" is executed. -+ */ -+ -+void bootmenu_add(const char *label, void (*fn)(void *user), void *user); -+ -+/* -+ * Run the boot menu. -+ */ -+ -+void bootmenu(void); -+ -+#endif /* !BOOTMENU_H */ -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -160,6 +160,8 @@ - /* valid baudrates */ - #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -+#define CFG_BOOTMENU -+ - /*----------------------------------------------------------------------- - * Stack sizes - * diff --git a/packages/uboot/u-boot-mkimage-gta01-native/cmd-unzip.patch b/packages/uboot/u-boot-mkimage-gta01-native/cmd-unzip.patch deleted file mode 100644 index ee4c1984fc..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/cmd-unzip.patch +++ /dev/null @@ -1,58 +0,0 @@ -common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from - memory to memory, and option CONFIG_UNZIP to enable it - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/common/cmd_mem.c -=================================================================== ---- u-boot.orig/common/cmd_mem.c -+++ u-boot/common/cmd_mem.c -@@ -1148,6 +1148,34 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int fl - } - #endif /* CONFIG_CRC32_VERIFY */ - -+ -+#ifdef CONFIG_UNZIP -+int gunzip (void *, int, unsigned char *, unsigned long *); -+ -+int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -+{ -+ unsigned long src, dst; -+ unsigned long src_len = ~0UL, dst_len = ~0UL; -+ int err; -+ -+ switch (argc) { -+ case 4: -+ dst_len = simple_strtoul(argv[3], NULL, 16); -+ /* fall through */ -+ case 3: -+ src = simple_strtoul(argv[1], NULL, 16); -+ dst = simple_strtoul(argv[2], NULL, 16); -+ break; -+ default: -+ printf ("Usage:\n%s\n", cmdtp->usage); -+ return 1; -+ } -+ -+ return !!gunzip((void *) dst, dst_len, (void *) src, &src_len); -+} -+#endif /* CONFIG_UNZIP */ -+ -+ - /**************************************************/ - #if (CONFIG_COMMANDS & CFG_CMD_MEMORY) - U_BOOT_CMD( -@@ -1251,5 +1279,13 @@ U_BOOT_CMD( - ); - #endif /* CONFIG_MX_CYCLIC */ - -+#ifdef CONFIG_UNZIP -+U_BOOT_CMD( -+ unzip, 4, 1, do_unzip, -+ "unzip - unzip a memory region\n", -+ "srcaddr dstaddr [dstsize]\n" -+); -+#endif /* CONFIG_UNZIP */ -+ - #endif - #endif /* CFG_CMD_MEMORY */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/console-ansi.patch b/packages/uboot/u-boot-mkimage-gta01-native/console-ansi.patch deleted file mode 100644 index 2ac5b75dee..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/console-ansi.patch +++ /dev/null @@ -1,127 +0,0 @@ -drivers/cfb_console.c: added processing of ANSI escape sequences \e[2J, \e[m, - \e[7m, and \e[row;colH -drivers/cfb_console.c (video_putc): make \r return to the beginning of the line - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/drivers/cfb_console.c -=================================================================== ---- u-boot.orig/drivers/cfb_console.c -+++ u-boot/drivers/cfb_console.c -@@ -181,6 +181,7 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the - - #include <version.h> - #include <linux/types.h> -+#include <linux/ctype.h> - #include <devices.h> - #include <video_font.h> - #ifdef CFG_CMD_DATE -@@ -676,10 +677,96 @@ static void console_newline (void) - - /*****************************************************************************/ - -+static enum { -+ CS_NORMAL = 0, -+ CS_ESC, -+ CS_NUM1, -+ CS_NUM2, -+} state = 0; -+ -+static int num1, num2; -+ -+ -+static void swap_drawing_colors(void) -+{ -+ eorx = fgx; -+ fgx = bgx; -+ bgx = eorx; -+ eorx = fgx ^ bgx; -+} -+ -+ -+static void process_sequence(char c) -+{ -+ static int inverted = 0; -+ int i, inv; -+ -+ switch (c) { -+ case 'J': -+ /* assume num1 == 2 */ -+ for (i = 0; i != CONSOLE_ROWS; i++) -+ console_scrollup(); -+ break; -+ case 'H': -+ if (num1 > CONSOLE_ROWS || num2 > CONSOLE_COLS) -+ break; -+ console_col = num2 ? num2-1 : 0; -+ console_row = num1 ? num1-1 : 0; -+ break; -+ case 'm': -+ inv = num1 == 7; -+ if (num1 && !inv) -+ break; -+ if (inverted != inv) -+ swap_drawing_colors(); -+ inverted = inv; -+ break; -+ } -+} -+ -+ -+static void escape_sequence(char c) -+{ -+ switch (state) { -+ case CS_ESC: -+ state = c == '[' ? CS_NUM1 : CS_NORMAL; -+ num1 = num2 = 0; -+ break; -+ case CS_NUM1: -+ if (isdigit(c)) -+ num1 = num1*10+c-'0'; -+ else if (c == ';') -+ state = CS_NUM2; -+ else { -+ process_sequence(c); -+ state = CS_NORMAL; -+ } -+ break; -+ case CS_NUM2: -+ if (isdigit(c)) -+ num2 = num2*10+c-'0'; -+ else { -+ process_sequence(c); -+ state = CS_NORMAL; -+ } -+ default: -+ /* can't happen */; -+ } -+} -+ -+ - void video_putc (const char c) - { -+ if (state) { -+ escape_sequence(c); -+ CURSOR_SET; -+ return; -+ } -+ - switch (c) { -- case 13: /* ignore */ -+ case 13: /* return to beginning of line */ -+ CURSOR_OFF; -+ console_col = 0; - break; - - case '\n': /* next line */ -@@ -698,6 +785,10 @@ void video_putc (const char c) - console_back (); - break; - -+ case '\e': -+ state = CS_ESC; -+ break; -+ - default: /* draw the char */ - video_putchar (console_col * VIDEO_FONT_WIDTH, - console_row * VIDEO_FONT_HEIGHT, diff --git a/packages/uboot/u-boot-mkimage-gta01-native/default-env.patch b/packages/uboot/u-boot-mkimage-gta01-native/default-env.patch deleted file mode 100644 index b9ae4f29fe..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/default-env.patch +++ /dev/null @@ -1,101 +0,0 @@ -common/env_common.c (default_env): new function that resets the environment to - the default value -common/env_common.c (env_relocate): use default_env instead of own copy -common/env_nand.c (env_relocate_spec): use default_env instead of own copy -include/environment.h: added default_env prototype - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/common/env_common.c -=================================================================== ---- u-boot.orig/common/env_common.c -+++ u-boot/common/env_common.c -@@ -202,6 +202,25 @@ uchar *env_get_addr (int index) - } - } - -+void default_env(void) -+{ -+ if (sizeof(default_environment) > ENV_SIZE) -+ { -+ puts ("*** Error - default environment is too large\n\n"); -+ return; -+ } -+ -+ memset (env_ptr, 0, sizeof(env_t)); -+ memcpy (env_ptr->data, -+ default_environment, -+ sizeof(default_environment)); -+#ifdef CFG_REDUNDAND_ENVIRONMENT -+ env_ptr->flags = 0xFF; -+#endif -+ env_crc_update (); -+ gd->env_valid = 1; -+} -+ - void env_relocate (void) - { - DEBUGF ("%s[%d] offset = 0x%lx\n", __FUNCTION__,__LINE__, -@@ -245,23 +264,8 @@ void env_relocate (void) - gd->env_valid = 0; - #endif - -- if (gd->env_valid == 0) { -- if (sizeof(default_environment) > ENV_SIZE) -- { -- puts ("*** Error - default environment is too large\n\n"); -- return; -- } -- -- memset (env_ptr, 0, sizeof(env_t)); -- memcpy (env_ptr->data, -- default_environment, -- sizeof(default_environment)); --#ifdef CFG_REDUNDAND_ENVIRONMENT -- env_ptr->flags = 0xFF; --#endif -- env_crc_update (); -- gd->env_valid = 1; -- } -+ if (gd->env_valid == 0) -+ default_env(); - else { - env_relocate_spec (); - } -Index: u-boot/common/env_nand.c -=================================================================== ---- u-boot.orig/common/env_nand.c -+++ u-boot/common/env_nand.c -@@ -313,19 +313,7 @@ void env_relocate_spec (void) - static void use_default() - { - puts ("*** Warning - bad CRC or NAND, using default environment\n\n"); -- -- if (default_environment_size > CFG_ENV_SIZE){ -- puts ("*** Error - default environment is too large\n\n"); -- return; -- } -- -- memset (env_ptr, 0, sizeof(env_t)); -- memcpy (env_ptr->data, -- default_environment, -- default_environment_size); -- env_ptr->crc = crc32(0, env_ptr->data, ENV_SIZE); -- gd->env_valid = 1; -- -+ default_env(); - } - #endif - -Index: u-boot/include/environment.h -=================================================================== ---- u-boot.orig/include/environment.h -+++ u-boot/include/environment.h -@@ -107,4 +107,7 @@ typedef struct environment_s { - unsigned char data[ENV_SIZE]; /* Environment data */ - } env_t; - -+ -+void default_env(void); -+ - #endif /* _ENVIRONMENT_H_ */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/dontask.patch b/packages/uboot/u-boot-mkimage-gta01-native/dontask.patch deleted file mode 100644 index 23d4b13626..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/dontask.patch +++ /dev/null @@ -1,22 +0,0 @@ -common/cmd_nand.c (yes): if the environment variable "dontask" is set to "y" or - "Y", non-interactively assume the answer was "yes". In all other cases, ask. - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/common/cmd_nand.c -=================================================================== ---- u-boot.orig/common/cmd_nand.c -+++ u-boot/common/cmd_nand.c -@@ -165,8 +165,12 @@ out: - - static int yes(void) - { -+ char *s; - char c; - -+ s = getenv("dontask"); -+ if (s && (s[0] =='y' || s[0] == 'Y') && !s[1]) -+ return 1; - c = getc(); - if (c != 'y' && c != 'Y') - return 0; diff --git a/packages/uboot/u-boot-mkimage-gta01-native/dynenv-harden.patch b/packages/uboot/u-boot-mkimage-gta01-native/dynenv-harden.patch deleted file mode 100644 index cf12352553..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/dynenv-harden.patch +++ /dev/null @@ -1,139 +0,0 @@ -common/cmd_nand.c: globalized arg_off_size -include/util.h: new header to convenience functions, such as arg_off_size -common/cmd_dynenv.c (do_dynenv): use arg_off_size to sanity-check offset and to - allow use of partition name -common/cmd_dynenv.c (do_dynenv): indicate in no uncertain terms when an update - would not work due to Flash bits already cleared -common/cmd_dynenv.c (do_dynenv): update CFG_ENV_OFFSET after successful "dynenv - set", so that we can write the new environment without having to reboot - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/common/cmd_nand.c -=================================================================== ---- u-boot.orig/common/cmd_nand.c -+++ u-boot/common/cmd_nand.c -@@ -100,7 +100,7 @@ static inline int str2long(char *p, ulon - return (*p != '\0' && *endptr == '\0') ? 1 : 0; - } - --static int -+int - arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size) - { - int idx = nand_curr_device; -Index: u-boot/include/util.h -=================================================================== ---- /dev/null -+++ u-boot/include/util.h -@@ -0,0 +1,33 @@ -+/* -+ * util.h - Convenience functions -+ * -+ * (C) Copyright 2006-2007 OpenMoko, Inc. -+ * Author: Werner Almesberger <werner@openmoko.org> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef UTIL_H -+#define UTIL_H -+ -+#include "nand.h" -+ -+ -+/* common/cmd_nand.c */ -+int arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, -+ ulong *size); -+ -+#endif /* UTIL_H */ -Index: u-boot/common/cmd_dynenv.c -=================================================================== ---- u-boot.orig/common/cmd_dynenv.c -+++ u-boot/common/cmd_dynenv.c -@@ -23,6 +23,7 @@ - #include <malloc.h> - #include <environment.h> - #include <nand.h> -+#include <util.h> - #include <asm/errno.h> - - #if defined(CFG_ENV_OFFSET_OOB) -@@ -39,8 +40,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag - if (!buf) - return -ENOMEM; - -+ ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); - if (!strcmp(cmd, "get")) { -- ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); - - if (buf[0] == 'E' && buf[1] == 'N' && - buf[2] == 'V' && buf[3] == '0') -@@ -49,7 +50,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag - printf("No dynamic environment marker in OOB block 0\n"); - - } else if (!strcmp(cmd, "set")) { -- unsigned long addr; -+ unsigned long addr, dummy; -+ - if (argc < 3) - goto usage; - -@@ -57,7 +59,23 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag - buf[1] = 'N'; - buf[2] = 'V'; - buf[3] = '0'; -- addr = simple_strtoul(argv[2], NULL, 16); -+ -+ if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy) < 0) { -+ printf("Offset or partition name expected\n"); -+ goto fail; -+ } -+ if (!ret) { -+ uint8_t tmp[4]; -+ int i; -+ -+ memcpy(&tmp, &addr, 4); -+ for (i = 0; i != 4; i++) -+ if (tmp[i] & ~buf[i+4]) { -+ printf("ERROR: erase OOB block to " -+ "write this value\n"); -+ goto fail; -+ } -+ } - memcpy(buf+4, &addr, 4); - - printf("%02x %02x %02x %02x - %02x %02x %02x %02x\n", -@@ -65,6 +83,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag - buf[4], buf[5], buf[6], buf[7]); - - ret = mtd->write_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); -+ if (!ret) -+ CFG_ENV_OFFSET = addr; - } else - goto usage; - -@@ -72,8 +92,9 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag - return ret; - - usage: -- free(buf); - printf("Usage:\n%s\n", cmdtp->usage); -+fail: -+ free(buf); - return 1; - } - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/early-powerdown.patch b/packages/uboot/u-boot-mkimage-gta01-native/early-powerdown.patch deleted file mode 100644 index 7326c2daa6..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/early-powerdown.patch +++ /dev/null @@ -1,40 +0,0 @@ -Index: u-boot/board/neo1973/neo1973.c -=================================================================== ---- u-boot.orig/board/neo1973/gta01/gta01.c -+++ u-boot/board/neo1973/gta01/gta01.c -@@ -68,8 +68,12 @@ DECLARE_GLOBAL_DATA_PTR; - #define U_M_PDIV 0x2 - #define U_M_SDIV 0x3 - -+#define VALID_WAKEUP_REASONS (PCF50606_INT1_ONKEYF | PCF50606_INT1_ALARM) -+ - unsigned int neo1973_wakeup_cause; - extern int nobootdelay; -+static unsigned char int1; -+ - - static inline void delay (unsigned long loops) - { -@@ -179,6 +183,13 @@ int board_init (void) - #error Please define GTA01 version - #endif - -+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); -+ int1 = pcf50606_reg_read(PCF50606_REG_INT1); -+ if (!(int1 & VALID_WAKEUP_REASONS) && !neo1973_aux_key_pressed()) { -+ pcf50606_reg_write(PCF50606_REG_OOCC1, PCF50606_OOCC1_GOSTDBY); -+ while (1); -+ } -+ - /* arch number of SMDK2410-Board */ - gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA01; - -@@ -200,7 +211,7 @@ int board_late_init(void) - pcf50606_init(); - - /* obtain wake-up reason, save INT1 in environment */ -- tmp = pcf50606_reg_read(PCF50606_REG_INT1); -+ tmp = int1; //pcf50606_reg_read(PCF50606_REG_INT1); - sprintf(buf, "0x%02x", tmp); - setenv("pcf50606_int1", buf); - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/enable-splash-bmp.patch b/packages/uboot/u-boot-mkimage-gta01-native/enable-splash-bmp.patch deleted file mode 100644 index dcb721c8d3..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/enable-splash-bmp.patch +++ /dev/null @@ -1,56 +0,0 @@ -drivers/cfb_console.c: include asm/byteorder.h for le32_to_cpu and friends - [ shouldn't someone else have found this long ago ? ] -include/configs/neo1973.h (CONFIG_COMMANDS): add CFG_CMD_BMP -include/configs/neo1973.h: enable splash screen and BMP support -include/configs/neo1973.h: remove #if 1 ... #endif around video definitions - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/drivers/cfb_console.c -=================================================================== ---- u-boot.orig/drivers/cfb_console.c -+++ u-boot/drivers/cfb_console.c -@@ -191,6 +191,7 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the - #if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) - #include <watchdog.h> - #include <bmp_layout.h> -+#include <asm/byteorder.h> - #endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */ - - /*****************************************************************************/ -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -86,6 +86,7 @@ - /* CFG_CMD_IRQ | */ \ - CFG_CMD_BOOTD | \ - CFG_CMD_CONSOLE | \ -+ CFG_CMD_BMP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_RUN | \ - CFG_CMD_ECHO | \ -@@ -244,19 +245,21 @@ - /* we have a board_late_init() function */ - #define BOARD_LATE_INIT 1 - --#if 1 - #define CONFIG_VIDEO - #define CONFIG_VIDEO_S3C2410 - #define CONFIG_CFB_CONSOLE - #define CONFIG_VIDEO_LOGO -+#define CONFIG_SPLASH_SCREEN -+#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ -+#define CONFIG_VIDEO_BMP_GZIP - #define CONFIG_VGA_AS_SINGLE_DEVICE -+#define CONFIG_UNZIP - - #define VIDEO_KBD_INIT_FCT 0 - #define VIDEO_TSTC_FCT serial_tstc - #define VIDEO_GETC_FCT serial_getc - - #define LCD_VIDEO_ADDR 0x33d00000 --#endif - - #define CONFIG_S3C2410_NAND_BBT 1 - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/env_nand_oob.patch b/packages/uboot/u-boot-mkimage-gta01-native/env_nand_oob.patch deleted file mode 100644 index 5a2dd61461..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/env_nand_oob.patch +++ /dev/null @@ -1,198 +0,0 @@ -This patch adds support for CFG_ENV_OFFSET_PATCHED and -CFG_ENV_OFFSET_OOB. - -Both try to solve the problem of fixing the environment location in NAND flash -at compile time, which doesn't work well if the NAND flash has a bad block at -exactly that location. - -CFG_ENV_OFFSET_PATCHED puts the environment in a global variable. You can then -use the linker script to put that variable to a fixed location in the u-boot -image. Then you can use bianry patching during the production flash process. - -The idea of CFG_ENV_OFFSET_OOB is to store the environment offset in the NAND -OOB data of block 0. We can do this in case the vendor makes a guarantee that -block 0 never is a factory-default bad block. - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/common/env_nand.c -=================================================================== ---- u-boot.orig/common/env_nand.c -+++ u-boot/common/env_nand.c -@@ -271,6 +271,33 @@ - ulong total; - int ret; - -+#if defined(CFG_ENV_OFFSET_OOB) -+ struct mtd_info *mtd = &nand_info[0]; -+ struct nand_chip *this = mtd->priv; -+ int buf_len; -+ uint8_t *buf; -+ -+ buf_len = (1 << this->bbt_erase_shift); -+ buf_len += (buf_len >> this->page_shift) * mtd->oobsize; -+ buf = malloc(buf_len); -+ if (!buf) -+ return; -+ -+ nand_read_raw(mtd, buf, 0, mtd->oobblock, mtd->oobsize); -+ if (buf[mtd->oobblock + 8 + 0] == 'E' && -+ buf[mtd->oobblock + 8 + 1] == 'N' && -+ buf[mtd->oobblock + 8 + 2] == 'V' && -+ buf[mtd->oobblock + 8 + 3] == '0') { -+ CFG_ENV_OFFSET = *((unsigned long *) &buf[mtd->oobblock + 8 + 4]); -+ /* fall through to the normal environment reading code below */ -+ free(buf); -+ puts("Found Environment offset in OOB..\n"); -+ } else { -+ free(buf); -+ return use_default(); -+ } -+#endif -+ - total = CFG_ENV_SIZE; - ret = nand_read(&nand_info[0], CFG_ENV_OFFSET, &total, (u_char*)env_ptr); - if (ret || total != CFG_ENV_SIZE) -Index: u-boot/common/environment.c -=================================================================== ---- u-boot.orig/common/environment.c -+++ u-boot/common/environment.c -@@ -29,6 +29,12 @@ - #undef __ASSEMBLY__ - #include <environment.h> - -+#if defined(CFG_ENV_OFFSET_PATCHED) -+unsigned long env_offset = CFG_ENV_OFFSET_PATCHED; -+#elif defined(CFG_ENV_OFFSET_OOB) -+unsigned long env_offset = CFG_ENV_OFFSET_OOB; -+#endif -+ - /* - * Handle HOSTS that have prepended - * crap on symbol names, not TARGETS. -Index: u-boot/include/environment.h -=================================================================== ---- u-boot.orig/include/environment.h -+++ u-boot/include/environment.h -@@ -70,6 +70,10 @@ - #endif /* CFG_ENV_IS_IN_FLASH */ - - #if defined(CFG_ENV_IS_IN_NAND) -+#if defined(CFG_ENV_OFFSET_PATCHED) || defined(CFG_ENV_OFFSET_OOB) -+extern unsigned long env_offset; -+#define CFG_ENV_OFFSET env_offset -+#else - # ifndef CFG_ENV_OFFSET - # error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND" - # endif -@@ -82,6 +86,7 @@ - # ifdef CFG_ENV_IS_EMBEDDED - # define ENV_IS_EMBEDDED 1 - # endif -+#endif /* CFG_ENV_NAND_PATCHED */ - #endif /* CFG_ENV_IS_IN_NAND */ - - -Index: u-boot/common/Makefile -=================================================================== ---- u-boot.orig/common/Makefile -+++ u-boot/common/Makefile -@@ -31,7 +31,7 @@ - cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \ - cmd_cache.o cmd_console.o \ - cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \ -- cmd_eeprom.o cmd_elf.o cmd_ext2.o \ -+ cmd_dynenv.o cmd_eeprom.o cmd_elf.o cmd_ext2.o \ - cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \ - cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \ - cmd_load.o cmd_log.o \ -Index: u-boot/common/cmd_dynenv.c -=================================================================== ---- /dev/null -+++ u-boot/common/cmd_dynenv.c -@@ -0,0 +1,85 @@ -+/* -+ * (C) Copyright 2006-2007 OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <command.h> -+#include <malloc.h> -+#include <environment.h> -+#include <nand.h> -+#include <asm/errno.h> -+ -+#if defined(CFG_ENV_OFFSET_OOB) -+ -+int do_dynenv(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -+{ -+ struct mtd_info *mtd = &nand_info[0]; -+ int ret, size = 8; -+ uint8_t *buf; -+ -+ char *cmd = argv[1]; -+ -+ buf = malloc(mtd->oobsize); -+ if (!buf) -+ return -ENOMEM; -+ -+ if (!strcmp(cmd, "get")) { -+ ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); -+ -+ if (buf[0] == 'E' && buf[1] == 'N' && -+ buf[2] == 'V' && buf[3] == '0') -+ printf("0x%08x\n", *((u_int32_t *) &buf[4])); -+ else -+ printf("No dynamic environment marker in OOB block 0\n"); -+ -+ } else if (!strcmp(cmd, "set")) { -+ unsigned long addr; -+ if (argc < 3) -+ goto usage; -+ -+ buf[0] = 'E'; -+ buf[1] = 'N'; -+ buf[2] = 'V'; -+ buf[3] = '0'; -+ addr = simple_strtoul(argv[2], NULL, 16); -+ memcpy(buf+4, &addr, 4); -+ -+ printf("%02x %02x %02x %02x - %02x %02x %02x %02x\n", -+ buf[0], buf[1], buf[2], buf[3], -+ buf[4], buf[5], buf[6], buf[7]); -+ -+ ret = mtd->write_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); -+ } else -+ goto usage; -+ -+ free(buf); -+ return ret; -+ -+usage: -+ free(buf); -+ printf("Usage:\n%s\n", cmdtp->usage); -+ return 1; -+} -+ -+U_BOOT_CMD(dynenv, 3, 1, do_dynenv, -+ "dynenv - dynamically placed (NAND) environment\n", -+ "dynenv set off - set enviromnent offset\n" -+ "dynenv get - get environment offset\n"); -+ -+#endif /* CFG_ENV_OFFSET_OOB */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/ext2load_hex.patch b/packages/uboot/u-boot-mkimage-gta01-native/ext2load_hex.patch deleted file mode 100644 index ff8e9cd6fc..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/ext2load_hex.patch +++ /dev/null @@ -1,17 +0,0 @@ -This patch adds the hex-printing of the file size read by 'ext2load' - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot.git/common/cmd_ext2.c -=================================================================== ---- u-boot.git.orig/common/cmd_ext2.c 2007-01-02 18:26:17.000000000 +0100 -+++ u-boot.git/common/cmd_ext2.c 2007-01-02 18:26:27.000000000 +0100 -@@ -279,7 +279,7 @@ - /* Loading ok, update default load address */ - load_addr = addr; - -- printf ("\n%ld bytes read\n", filelen); -+ printf ("\n%ld (0x%lx) bytes read\n", filelen, filelen); - sprintf(buf, "%lX", filelen); - setenv("filesize", buf); - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/lowlevel_foo.patch b/packages/uboot/u-boot-mkimage-gta01-native/lowlevel_foo.patch deleted file mode 100644 index 715c46ed81..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/lowlevel_foo.patch +++ /dev/null @@ -1,229 +0,0 @@ -board/neo1973/lowlevel_foo.S: http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.S -board/neo1973/lowlevel_foo.lds: http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.lds -board/neo1973/Makefile: added building of lowlevel_foo.bin (based on - http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.build.sh) - -Index: u-boot/board/neo1973/common/lowlevel_foo.S -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/lowlevel_foo.S -@@ -0,0 +1,82 @@ -+ -+_start: -+ b reset -+undefvec: -+ b undefvec -+swivec: -+ b swivec -+pabtvec: -+ b pabtvec -+dabtvec: -+ b dabtvec -+rsvdvec: -+ b rsvdvec -+irqvec: -+ b irqvec -+fiqvec: -+ b fiqvec -+ -+reset: -+ /* -+ * set the cpu to SVC32 mode -+ */ -+ mrs r0,cpsr -+ bic r0,r0,#0x1f -+ orr r0,r0,#0xd3 -+ msr cpsr,r0 -+ -+/* turn off the watchdog */ -+#define pWTCON 0x53000000 -+#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ -+#define INTSUBMSK 0x4A00001C -+#define CLKDIVN 0x4C000014 /* clock divisor register */ -+ -+ ldr r0, =pWTCON -+ mov r1, #0x0 -+ str r1, [r0] -+ -+ mov r1, #0xffffffff -+ ldr r0, =INTMSK -+ str r1, [r0] -+ ldr r1, =0x3ff -+ ldr r0, =INTSUBMSK -+ str r1, [r0] -+ -+ /* FCLK:HCLK:PCLK = 1:2:4 */ -+ /* default FCLK is 120 MHz ! */ -+ ldr r0, =CLKDIVN -+ mov r1, #3 -+ str r1, [r0] -+ -+ bl cpu_init_crit -+ ldr r0,=TEXT_BASE -+ mov pc, r0 -+ -+cpu_init_crit: -+ /* -+ * flush v4 I/D caches -+ */ -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ -+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ -+ -+ /* -+ * disable MMU stuff and caches -+ */ -+ mrc p15, 0, r0, c1, c0, 0 -+ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) -+ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) -+ orr r0, r0, #0x00000002 @ set bit 2 (A) Align -+ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache -+ mcr p15, 0, r0, c1, c0, 0 -+ -+ /* -+ * before relocating, we have to setup RAM timing -+ * because memory timing is board-dependend, you will -+ * find a lowlevel_init.S in your board directory. -+ */ -+ mov ip, lr -+ bl lowlevel_init -+ mov lr, ip -+ mov pc, lr -+ -Index: u-boot/board/neo1973/common/lowlevel_foo.lds -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/lowlevel_foo.lds -@@ -0,0 +1,56 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ lowlevel_foo.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/board/neo1973/gta01/Makefile -=================================================================== ---- u-boot.orig/board/neo1973/gta01/Makefile -+++ u-boot/board/neo1973/gta01/Makefile -@@ -28,14 +28,31 @@ - OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o - SOBJS := ../common/lowlevel_init.o - -+.PHONY: all -+ -+all: $(LIB) lowevel_foo.bin -+ - $(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) - -+lowlevel_foo.o: ../common/lowlevel_foo.S -+ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ -+ -o lowlevel_foo.o ../common/lowlevel_foo.S -+ -+lowlevel_foo: lowlevel_foo.o ../common/lowlevel_init.o ../common/lowlevel_foo.lds -+ $(LD) -T ../common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ -+ ../common/lowlevel_init.o lowlevel_foo.o -o lowlevel_foo -+ -+lowevel_foo.bin: lowlevel_foo -+ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ -+ lowlevel_foo lowlevel_foo.bin -+ -+ - clean: -- rm -f $(SOBJS) $(OBJS) -+ rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o - - distclean: clean -- rm -f $(LIB) core *.bak .depend -+ rm -f $(LIB) core *.bak .depend lowlevel_foo.bin - - ######################################################################### - -Index: u-boot/board/qt2410/Makefile -=================================================================== ---- u-boot.orig/board/qt2410/Makefile -+++ u-boot/board/qt2410/Makefile -@@ -28,14 +28,31 @@ - OBJS := qt2410.o flash.o - SOBJS := lowlevel_init.o - -+.PHONY: all -+ -+all: $(LIB) lowevel_foo.bin -+ - $(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) - -+lowlevel_foo.o: ../neo1973/common/lowlevel_foo.S -+ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ -+ -o lowlevel_foo.o ../neo1973/common/lowlevel_foo.S -+ -+lowlevel_foo: lowlevel_foo.o lowlevel_init.o \ -+ ../neo1973/common/lowlevel_foo.lds -+ $(LD) -T ../neo1973/common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ -+ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo -+ -+lowevel_foo.bin: lowlevel_foo -+ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ -+ lowlevel_foo lowlevel_foo.bin -+ - clean: -- rm -f $(SOBJS) $(OBJS) -+ rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o - - distclean: clean -- rm -f $(LIB) core *.bak .depend -+ rm -f $(LIB) core *.bak .depend lowlevel_foo.bin - - ######################################################################### - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/mmcinit-power-up.patch b/packages/uboot/u-boot-mkimage-gta01-native/mmcinit-power-up.patch deleted file mode 100644 index fcf54b9fd1..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/mmcinit-power-up.patch +++ /dev/null @@ -1,73 +0,0 @@ -board/neo1973/neo1973.c (board_late_init): moved MMC power-up to separate - function -cpu/arm920t/s3c24x0/mmc.c (mmc_init): call mmc_power_up and return -ENODEV - immediately if there is no card - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/board/neo1973/neo1973.c -=================================================================== ---- u-boot.orig/board/neo1973/neo1973.c -+++ u-boot/board/neo1973/neo1973.c -@@ -223,6 +223,19 @@ int board_init (void) - return 0; - } - -+int mmc_power_up(void) -+{ -+#if defined(CONFIG_ARCH_GTA01B_v4) -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* check if sd card is inserted, and power-up if it is */ -+ if (gpio->GPFDAT & (1 << 5)) -+ return 0; -+ gpio->GPBDAT &= ~(1 << 2); -+#endif /* !CONFIG_ARCH_GTA01B_v4 */ -+ return 1; -+} -+ - int board_late_init(void) - { - unsigned char tmp; -@@ -289,14 +302,8 @@ continue_boot: - /* switch on the backlight */ - neo1973_backlight(1); - --#if defined(CONFIG_ARCH_GTA01B_v4) -- { -- /* check if sd card is inserted, and power-up if it is */ -- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -- if (!(gpio->GPFDAT & (1 << 5))) -- gpio->GPBDAT &= ~(1 << 2); -- } --#endif -+ /* check if sd card is inserted, and power-up if it is */ -+ mmc_power_up(); - - return 0; - } -Index: u-boot/cpu/arm920t/s3c24x0/mmc.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/mmc.c -+++ u-boot/cpu/arm920t/s3c24x0/mmc.c -@@ -381,6 +381,11 @@ static void print_sd_cid(const struct sd - cid->crc >> 1, cid->crc & 1); - } - -+int __attribute__((weak)) mmc_power_up(void) -+{ -+ return 1; -+} -+ - int mmc_init(int verbose) - { - int retries, rc = -ENODEV; -@@ -393,6 +398,8 @@ int mmc_init(int verbose) - debug("mmc_init(PCLK=%u)\n", get_PCLK()); - - clk_power->CLKCON |= (1 << 9); -+ if (!mmc_power_up()) -+ return -ENODEV; - - /* S3C2410 has some bug that prevents reliable operation at higher speed */ - //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-badisbad.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-badisbad.patch deleted file mode 100644 index a5800e2499..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/nand-badisbad.patch +++ /dev/null @@ -1,30 +0,0 @@ -This patch makes nand_block_checkbad check both the BBT and the actual -OOB data. This avoids accidently passing blocks as good when BBT and -OOB markers are not synchronized, e.g., before "nand createbbt". - -Experimental. - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/drivers/nand/nand_base.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_base.c -+++ u-boot/drivers/nand/nand_base.c -@@ -517,11 +517,14 @@ static int nand_block_checkbad (struct m - { - struct nand_chip *this = mtd->priv; - -- if (!this->bbt) -- return this->block_bad(mtd, ofs, getchip); -+ if (this->block_bad(mtd, ofs, getchip)) -+ return 1; - - /* Return info from the table */ -- return nand_isbad_bbt (mtd, ofs, allowbbt); -+ if (this->bbt && nand_isbad_bbt (mtd, ofs, allowbbt)) -+ return 1; -+ -+ return 0; - } - - /** diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-createbbt.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-createbbt.patch deleted file mode 100644 index 74b79da0a9..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/nand-createbbt.patch +++ /dev/null @@ -1,126 +0,0 @@ -This patch adds user-requested BBT creation. It includes the following changes: - -- common/cmd_nand.c: move yes/no decision to separate function -- do_nand: ask for confirmation for "nand erase" -- do_nand: add command "nand createbbt" to erase NAND and create a new BBT - -Experimental. - -- Werner Almesberger <werner@openmoko.org> - - -Index: u-boot/common/cmd_nand.c -=================================================================== ---- u-boot.orig/common/cmd_nand.c 2007-02-16 23:53:28.000000000 +0100 -+++ u-boot/common/cmd_nand.c 2007-02-16 23:53:57.000000000 +0100 -@@ -163,6 +163,17 @@ - return 0; - } - -+static int yes(void) -+{ -+ char c; -+ -+ c = getc(); -+ if (c != 'y' && c != 'Y') -+ return 0; -+ c = getc(); -+ return c == '\r' || c == '\n'; -+} -+ - int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) - { - int i, dev, ret; -@@ -228,7 +239,8 @@ - strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 && - strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 && - strcmp(cmd, "biterr") != 0 && -- strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 ) -+ strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 && -+ strcmp(cmd, "createbbt") != 0 ) - goto usage; - - /* the following commands operate on the current device */ -@@ -283,13 +295,23 @@ - "are sure of what you are doing!\n" - "\nReally scrub this NAND flash? <y/N>\n"); - -- if (getc() == 'y' && getc() == '\r') { -+ if (yes()) { - opts.scrub = 1; - } else { - puts("scrub aborted\n"); - return -1; - } - } -+ else { -+ if (opts.length == nand->size) { -+ puts("Really erase everything ? <y/N>\n"); -+ if (!yes()) { -+ puts("erase aborted\n"); -+ return -1; -+ } -+ } -+ } -+ - ret = nand_erase_opts(nand, &opts); - printf("%s\n", ret ? "ERROR" : "OK"); - -@@ -458,6 +480,33 @@ - return 0; - } - -+ if (strcmp(cmd, "createbbt") == 0) { -+ struct nand_chip *nand_chip = nand->priv; -+ nand_erase_options_t opts; -+ -+ puts("Create BBT and erase everything ? <y/N>\n"); -+ if (!yes()) { -+ puts("createbbt aborted\n"); -+ return -1; -+ } -+ memset(&opts, 0, sizeof(opts)); -+ opts.length = nand->size; -+ if (nand_erase_opts(nand, &opts)) { -+ puts("Erase failed\n"); -+ return 1; -+ } -+ nand_chip->options &= ~NAND_DONT_CREATE_BBT; -+ puts("Creating BBT. Please wait ..."); -+ if (nand_default_bbt(nand)) { -+ puts("\nFailed\n"); -+ return 1; -+ } -+ else { -+ puts("\n"); -+ return 0; -+ } -+ } -+ - usage: - printf("Usage:\n%s\n", cmdtp->usage); - return 1; -@@ -478,7 +527,8 @@ - "nand markbad off - mark bad block at offset (UNSAFE)\n" - "nand biterr off - make a bit error at offset (UNSAFE)\n" - "nand lock [tight] [status] - bring nand to lock state or display locked pages\n" -- "nand unlock [offset] [size] - unlock section\n"); -+ "nand unlock [offset] [size] - unlock section\n" -+ "nand createbbt - create bad block table\n"); - - static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, - ulong offset, ulong addr, char *cmd) -Index: u-boot/drivers/nand/nand_bbt.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_bbt.c 2007-02-16 23:53:54.000000000 +0100 -+++ u-boot/drivers/nand/nand_bbt.c 2007-02-16 23:53:57.000000000 +0100 -@@ -795,7 +795,8 @@ - - len = mtd->size >> (this->bbt_erase_shift + 2); - /* Allocate memory (2bit per block) */ -- this->bbt = kmalloc (len, GFP_KERNEL); -+ if (!this->bbt) -+ this->bbt = kmalloc (len, GFP_KERNEL); - if (!this->bbt) { - printk (KERN_ERR "nand_scan_bbt: Out of memory\n"); - return -ENOMEM; diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-dynamic_partitions.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-dynamic_partitions.patch deleted file mode 100644 index ecce004ca6..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/nand-dynamic_partitions.patch +++ /dev/null @@ -1,354 +0,0 @@ -This patch adds support for 'dynamic partitions'. This basically -works as follows: -* The nand code generates a bad-block-table at the first scan of the chip -* The dynamic partition code calculates the raw partition sizes based on - the bad block table. E.g. if you have a partition of size 0x30000, and there are - two bad blocks (0x4000 each) in it, the raw size will increase to 0x38000, and the - following partitions get shifted towards the end of flash. - -Please note that currently the desired partition sizes are stored at compile-time -in an array in drivers/nand/nand_bbt.c, so this definitely needs to change before -submitting/merging upstream. - -In order to calculate the partiton map (and set mtdparts accordingly), you can use -the 'dynpart' command at the prompt. Use 'saveenv' to make the setting permanent. - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/drivers/nand/nand_bbt.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_bbt.c -+++ u-boot/drivers/nand/nand_bbt.c -@@ -1044,9 +1044,86 @@ - switch ((int)res) { - case 0x00: return 0; - case 0x01: return 1; -+ case 0x03: return 1; - case 0x02: return allowbbt ? 0 : 1; - } - return 1; - } - -+#if defined(CONFIG_NAND_DYNPART) -+ -+extern unsigned int dynpart_size[]; -+extern char *dynpart_names[]; -+ -+#define MTDPARTS_MAX_SIZE 512 -+ -+ -+static int skip_offs(const struct nand_chip *this, unsigned int offs) -+{ -+ int block = (int) (offs >> (this->bbt_erase_shift - 1)); -+ u_int8_t bbt = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; -+ -+ return bbt == 3; -+} -+ -+int nand_create_mtd_dynpart(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ int part; -+ char *mtdparts; -+ unsigned int cur_offs = 0; -+ -+ mtdparts = malloc(MTDPARTS_MAX_SIZE); /* FIXME: bounds checking */ -+ if (!mtdparts) -+ return -ENOMEM; -+ -+ sprintf(mtdparts, "mtdparts=" CFG_NAND_DYNPART_MTD_KERNEL_NAME ":"); -+ -+ for (part = 0; dynpart_size[part] != 0; part++) { -+ unsigned int bb_delta = 0; -+ unsigned int offs = 0; -+ char mtdpart[32]; -+ -+ for (offs = cur_offs; -+ offs < cur_offs + dynpart_size[part] + bb_delta; -+ offs += mtd->erasesize) { -+ if (skip_offs(this, offs)) -+ bb_delta += mtd->erasesize; -+ } -+ -+ /* -+ * Absorb bad blocks immediately following this partition also -+ * into the partition, in order to make next partition start -+ * with a good block. This simplifies handling of the -+ * environment partition. -+ */ -+ while (offs < this->chipsize && skip_offs(this, offs)) { -+ bb_delta += mtd->erasesize; -+ offs += mtd->erasesize; -+ } -+ -+ if (cur_offs + dynpart_size[part] + bb_delta > this->chipsize) -+ dynpart_size[part] = this->chipsize - cur_offs - bb_delta; -+#if 0 -+ printf("partition %u: start = 0x%08x, end=%08x size=%08x, size_inc_bb=%08x\n", -+ part, cur_offs, cur_offs + dynpart_size[part] + bb_delta, -+ dynpart_size[part], dynpart_size[part] + bb_delta); -+#endif -+ cur_offs += dynpart_size[part] + bb_delta; -+ sprintf(mtdpart, "0x%.8x(%.16s),", dynpart_size[part] + bb_delta, -+ dynpart_names[part]); -+ mtdpart[sizeof(mtdpart)-1] = '\0'; -+ strncat(mtdparts, mtdpart, -+ MTDPARTS_MAX_SIZE-strlen(mtdparts)-1); -+ } -+ -+ mtdparts[strlen(mtdparts)-1] = '\0'; -+ printf("mtdparts %s\n", mtdparts); -+ setenv("mtdparts", mtdparts); -+ -+ free(mtdparts); -+ return 0; -+} -+#endif /* CONFIG_NAND_DYNPART */ -+ - #endif -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -99,7 +99,7 @@ - CFG_CMD_ELF | \ - CFG_CMD_MISC | \ - /* CFG_CMD_USB | */ \ -- /* CFG_CMD_JFFS2 | */ \ -+ CFG_CMD_JFFS2 | \ - CFG_CMD_DIAG | \ - /* CFG_CMD_HWFLOW | */ \ - CFG_CMD_SAVES | \ -@@ -212,13 +212,13 @@ - #define CONFIG_FAT 1 - #define CONFIG_SUPPORT_VFAT - --#if 0 -+#if 1 - /* JFFS2 driver */ - #define CONFIG_JFFS2_CMDLINE 1 - #define CONFIG_JFFS2_NAND 1 - #define CONFIG_JFFS2_NAND_DEV 0 --#define CONFIG_JFFS2_NAND_OFF 0x634000 --#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+//#define CONFIG_JFFS2_NAND_OFF 0x634000 -+//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 - #endif - - /* ATAG configuration */ -@@ -257,4 +257,9 @@ - - #define CONFIG_DRIVER_PCF50606 1 - -+#define MTDIDS_DEFAULT "nand0=neo1973-nand" -+#define MTPARTS_DEFAULT "neo1973-nand:256k(u-boot),16k(u-boot_env),2M(kernel),640k(splash),-(jffs2)" -+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand" -+#define CONFIG_NAND_DYNPART -+ - #endif /* __CONFIG_H */ -Index: u-boot/common/cmd_jffs2.c -=================================================================== ---- u-boot.orig/common/cmd_jffs2.c -+++ u-boot/common/cmd_jffs2.c -@@ -1841,6 +1841,29 @@ - return NULL; - } - -+/* Return the 'net size' of the partition (i.e. excluding any bad blocks) */ -+unsigned int nand_net_part_size(struct part_info *part) -+{ -+ struct mtd_info *mtd; -+ unsigned int offs; -+ unsigned int bb_delta = 0; -+ -+ if (!part || !part->dev || !part->dev->id || -+ part->dev->id->num >= CFG_MAX_NAND_DEVICE) -+ return 0; -+ -+ mtd = &nand_info[part->dev->id->num]; -+ -+ for (offs = part->offset; offs < part->offset + part->size; -+ offs += mtd->erasesize) { -+ if (nand_isbad_bbt(mtd, offs, 0)) -+ bb_delta += mtd->erasesize; -+ } -+ -+ return part->size - bb_delta; -+} -+ -+ - /***************************************************/ - /* U-boot commands */ - /***************************************************/ -@@ -2132,6 +2155,24 @@ - printf ("Usage:\n%s\n", cmdtp->usage); - return 1; - } -+ -+#if defined(CONFIG_NAND_DYNPART) -+extern int nand_create_mtd_dynpart(struct mtd_info *mtd); -+ -+int do_dynpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -+{ -+#if 0 -+ int i = simple_strtoul(argv[1], NULL, 0); -+ if (i >= CFG_MAX_NAND_DEVICE) -+ return -EINVAL; -+#endif -+ nand_create_mtd_dynpart(&nand_info[0]); -+ -+ return 0; -+} -+#endif /* CONFIG_NAND_DYNPART */ -+ -+ - #endif /* #ifdef CONFIG_JFFS2_CMDLINE */ - - /***************************************************/ -@@ -2197,6 +2238,15 @@ - "<name> := '(' NAME ')'\n" - "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)\n" - ); -+ -+#if defined(CONFIG_NAND_DYNPART) -+U_BOOT_CMD( -+ dynpart, 1, 1, do_dynpart, -+ "dynpart\t- dynamically calculate partition table based on BBT\n", -+ "\n" -+ " - sets 'mtdparts' according to BBT\n"); -+#endif /* CONFIG_NAND_DYNPART */ -+ - #endif /* #ifdef CONFIG_JFFS2_CMDLINE */ - - /***************************************************/ -Index: u-boot/common/cmd_nand.c -=================================================================== ---- u-boot.orig/common/cmd_nand.c -+++ u-boot/common/cmd_nand.c -@@ -101,7 +101,7 @@ - } - - int --arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size) -+arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size, int net) - { - int idx = nand_curr_device; - #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE) -@@ -122,10 +122,17 @@ - printf("'%s' is not a number\n", argv[1]); - return -1; - } -- if (*size > part->size) -- *size = part->size; -+ if (*size > part->size) { -+ if (net) -+ *size = nand_net_part_size(part); -+ else -+ *size = part->size; -+ } - } else { -- *size = part->size; -+ if (net) -+ *size = nand_net_part_size(part); -+ else -+ *size = part->size; - } - idx = dev->id->num; - *nand = nand_info[idx]; -@@ -261,7 +268,7 @@ - - printf("\nNAND %s: ", scrub ? "scrub" : "erase"); - /* skip first two or three arguments, look for offset and size */ -- if (arg_off_size(argc - o, argv + o, nand, &off, &size) != 0) -+ if (arg_off_size(argc - o, argv + o, nand, &off, &size, 0) != 0) - return 1; - - memset(&opts, 0, sizeof(opts)); -@@ -323,7 +330,7 @@ - - read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ - printf("\nNAND %s: ", read ? "read" : "write"); -- if (arg_off_size(argc - 3, argv + 3, nand, &off, &size) != 0) -+ if (arg_off_size(argc - 3, argv + 3, nand, &off, &size, 1) != 0) - return 1; - - s = strchr(cmd, '.'); -@@ -445,7 +452,7 @@ - } - - if (strcmp(cmd, "unlock") == 0) { -- if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0) -+ if (arg_off_size(argc - 2, argv + 2, nand, &off, &size, 0) < 0) - return 1; - - if (!nand_unlock(nand, off, size)) { -Index: u-boot/common/cmd_dynenv.c -=================================================================== ---- u-boot.orig/common/cmd_dynenv.c -+++ u-boot/common/cmd_dynenv.c -@@ -60,7 +60,7 @@ - buf[2] = 'V'; - buf[3] = '0'; - -- if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy) < 0) { -+ if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy, 1) < 0) { - printf("Offset or partition name expected\n"); - goto fail; - } -Index: u-boot/include/util.h -=================================================================== ---- u-boot.orig/include/util.h -+++ u-boot/include/util.h -@@ -28,6 +28,6 @@ - - /* common/cmd_nand.c */ - int arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, -- ulong *size); -+ ulong *size, int net); - - #endif /* UTIL_H */ -Index: u-boot/board/qt2410/qt2410.c -=================================================================== ---- u-boot.orig/board/qt2410/qt2410.c -+++ u-boot/board/qt2410/qt2410.c -@@ -126,3 +126,9 @@ - - return 0; - } -+ -+unsigned int dynpart_size[] = { -+ CFG_UBOOT_SIZE, 0x4000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; -+char *dynpart_names[] = { -+ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; -+ -Index: u-boot/board/neo1973/gta01/gta01.c -=================================================================== ---- u-boot.orig/board/neo1973/gta01/gta01.c -+++ u-boot/board/neo1973/gta01/gta01.c -@@ -429,3 +434,14 @@ - return 0; - } - -+ -+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. -+ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 -+ images: 640*480*2*2 = 1228800 < 1245184. */ -+ -+unsigned int dynpart_size[] = { -+ CFG_UBOOT_SIZE, 0x4000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; -+char *dynpart_names[] = { -+ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; -+ -+ -Index: u-boot/include/configs/qt2410.h -=================================================================== ---- u-boot.orig/include/configs/qt2410.h -+++ u-boot/include/configs/qt2410.h -@@ -283,5 +283,7 @@ - - #define MTDIDS_DEFAULT "nand0=qt2410-nand" - #define MTPARTS_DEFAULT "qt2410-nand:192k(u-boot),8k(u-boot_env),2M(kernel),2M(splash),-(jffs2)" -+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "qt2410-nand" -+#define CONFIG_NAND_DYNPART - - #endif /* __CONFIG_H */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-otp.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-otp.patch deleted file mode 100644 index b0e9bf4c4b..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/nand-otp.patch +++ /dev/null @@ -1,302 +0,0 @@ -Index: u-boot/common/cmd_nand.c -=================================================================== ---- u-boot.orig/common/cmd_nand.c -+++ u-boot/common/cmd_nand.c -@@ -392,6 +392,14 @@ - else - ret = nand->write_oob(nand, off, size, &size, - (u_char *) addr); -+ } else if (s != NULL && !strcmp(s, ".otp")) { -+ /* read out-of-band data */ -+ if (read) -+ ret = nand->read_otp(nand, off, size, &size, -+ (u_char *) addr); -+ else -+ ret = nand->write_otp(nand, off, size, &size, -+ (u_char *) addr); - } else { - if (read) - ret = nand_read(nand, off, &size, (u_char *)addr); -@@ -527,8 +535,9 @@ - "nand - NAND sub-system\n", - "info - show available NAND devices\n" - "nand device [dev] - show or set current device\n" -- "nand read[.jffs2] - addr off|partition size\n" -- "nand write[.jffs2] - addr off|partiton size - read/write `size' bytes starting\n" -+ "nand read[.jffs2, .oob, .otp] addr off|partition size\n" -+ "nand write[.jffs2, .oob, .otp] addr off|partiton size\n" -+ " - read/write `size' bytes starting\n" - " at offset `off' to/from memory address `addr'\n" - "nand erase [clean] [off size] - erase `size' bytes from\n" - " offset `off' (entire device if not specified)\n" -Index: u-boot/cpu/arm920t/s3c24x0/nand.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c -+++ u-boot/cpu/arm920t/s3c24x0/nand.c -@@ -205,7 +205,7 @@ - } - #endif - --int board_nand_init(struct nand_chip *nand) -+int s3c24x0_nand_init(struct nand_chip *nand) - { - u_int32_t cfg; - u_int8_t tacls, twrph0, twrph1; -Index: u-boot/drivers/nand/nand_base.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_base.c -+++ u-boot/drivers/nand/nand_base.c -@@ -2042,6 +2042,32 @@ - } - #endif - -+/* -+ * See nand_read_oob and nand_write_oob -+ */ -+ -+static int nand_read_otp(struct mtd_info *mtd, loff_t from, size_t len, -+ size_t *retlen, u_char *buf) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ if (!this->read_otp) -+ return -ENOSYS; -+ return this->read_otp(mtd, from, len, retlen, buf); -+ -+} -+ -+static int nand_write_otp(struct mtd_info *mtd, loff_t to, size_t len, -+ size_t *retlen, const u_char *buf) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ if (!this->write_otp) -+ return -ENOSYS; -+ return this->write_otp(mtd, to, len, retlen, buf); -+} -+ -+ - /** - * single_erease_cmd - [GENERIC] NAND standard block erase command function - * @mtd: MTD device structure -@@ -2613,6 +2639,8 @@ - mtd->write_ecc = nand_write_ecc; - mtd->read_oob = nand_read_oob; - mtd->write_oob = nand_write_oob; -+ mtd->read_otp = nand_read_otp; -+ mtd->write_otp = nand_write_otp; - /* XXX U-BOOT XXX */ - #if 0 - mtd->readv = NULL; -Index: u-boot/include/linux/mtd/mtd.h -=================================================================== ---- u-boot.orig/include/linux/mtd/mtd.h -+++ u-boot/include/linux/mtd/mtd.h -@@ -95,6 +95,9 @@ - int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); - -+ int (*read_otp) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); -+ int (*write_otp) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); -+ - /* - * Methods to access the protection register area, present in some - * flash devices. The user data is one time programmable but the -Index: u-boot/include/linux/mtd/nand.h -=================================================================== ---- u-boot.orig/include/linux/mtd/nand.h -+++ u-boot/include/linux/mtd/nand.h -@@ -307,6 +307,10 @@ - void (*enable_hwecc)(struct mtd_info *mtd, int mode); - void (*erase_cmd)(struct mtd_info *mtd, int page); - int (*scan_bbt)(struct mtd_info *mtd); -+ int (*read_otp)(struct mtd_info *mtd, loff_t from, -+ size_t len, size_t *retlen, u_char *buf); -+ int (*write_otp) (struct mtd_info *mtd, loff_t to, -+ size_t len, size_t *retlen, const u_char *buf); - int eccmode; - int eccsize; - int eccbytes; -Index: u-boot/board/neo1973/gta01/Makefile -=================================================================== ---- u-boot.orig/board/neo1973/gta01/Makefile -+++ u-boot/board/neo1973/gta01/Makefile -@@ -25,7 +25,7 @@ - - LIB = lib$(BOARD).a - --OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o -+OBJS := gta01.o pcf50606.o nand.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o - SOBJS := ../common/lowlevel_init.o - - .PHONY: all -Index: u-boot/board/neo1973/gta01/nand.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta01/nand.c -@@ -0,0 +1,121 @@ -+/* -+ * nand.c - Board-specific NAND setup -+ * -+ * Copyright (C) 2007 by OpenMoko, Inc. -+ * Written by Werner Almesberger <werner@openmoko.org> -+ * All Rights Reserved -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include "config.h" /* nand.h needs NAND_MAX_CHIPS */ -+#include "linux/mtd/mtd.h" -+#include "linux/mtd/nand.h" -+#include "asm/errno.h" -+ -+ -+int s3c24x0_nand_init(struct nand_chip *nand); -+ -+ -+static void samsung_nand_begin_otp(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ /* @@@FIXME: this is ugly - we select the NAND chip to send the -+ mode switch commands, knowing that it will be switched off later */ -+ this->select_chip(mtd, 0); -+ /* "magic" mode change */ -+ this->cmdfunc(mtd, 0x30, -1, -1); -+ this->cmdfunc(mtd, 0x65, -1, -1); -+} -+ -+ -+static void samsung_nand_end_otp(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ /* read/write deselected the chip so now we need to select again */ -+ this->select_chip(mtd, 0); -+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); -+ this->select_chip(mtd, -1); -+} -+ -+ -+static loff_t otp_page[] = { -+ 0x15, /* 00-XX-00-00, with XX = 15h-19h */ -+ 0x16, -+ 0x17, -+ 0x18, -+ 0x19, -+ 0x1b, /* 00-1B-00-00 */ -+}; -+ -+#define OTP_PAGES (sizeof(otp_page)/sizeof(*otp_page)) -+ -+ -+static int convert_otp_address(loff_t *addr, size_t *len) -+{ -+ int page; -+ -+ if (*len && *addr >> 9 != (*addr+*len-1) >> 9) -+ return -EINVAL; -+ if (*len > 512) -+ return -EINVAL; -+ page = *addr >> 9; -+ if (page >= OTP_PAGES) -+ return -EINVAL; -+ *addr = otp_page[page] << 9; -+ return 0; -+} -+ -+ -+static int samsung_nand_read_otp(struct mtd_info *mtd, loff_t from, -+ size_t len, size_t *retlen, u_char *buf) -+{ -+ int ret; -+ -+ ret = convert_otp_address(&from, &len); -+ if (ret) -+ return ret; -+ samsung_nand_begin_otp(mtd); -+ ret = mtd->read(mtd, from, len, retlen, buf); -+ samsung_nand_end_otp(mtd); -+ return ret; -+} -+ -+ -+static int samsung_nand_write_otp(struct mtd_info *mtd, loff_t to, -+ size_t len, size_t *retlen, const u_char *buf) -+{ -+ int ret; -+ -+ ret = convert_otp_address(&to, &len); -+ if (ret) -+ return ret; -+ samsung_nand_begin_otp(mtd); -+ ret = mtd->write(mtd, to, len, retlen, buf); -+ samsung_nand_end_otp(mtd); -+ return ret; -+} -+ -+ -+int board_nand_init(struct nand_chip *nand) -+{ -+ nand->read_otp = samsung_nand_read_otp; -+ nand->write_otp = samsung_nand_write_otp; -+ return s3c24x0_nand_init(nand); -+} -Index: u-boot/board/neo1973/gta02/nand.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta02/nand.c -@@ -0,0 +1,39 @@ -+/* -+ * nand.c - Board-specific NAND setup -+ * -+ * Copyright (C) 2007 by OpenMoko, Inc. -+ * Written by Werner Almesberger <werner@openmoko.org> -+ * All Rights Reserved -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include "config.h" /* nand.h needs NAND_MAX_CHIPS */ -+#include "linux/mtd/mtd.h" -+#include "linux/mtd/nand.h" -+ -+ -+int s3c24x0_nand_init(struct nand_chip *nand); -+ -+ -+/* Add OTP et al later */ -+ -+ -+int board_nand_init(struct nand_chip *nand) -+{ -+ return s3c24x0_nand_init(nand); -+} diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-read_write_oob.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-read_write_oob.patch deleted file mode 100644 index 8360409e46..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/nand-read_write_oob.patch +++ /dev/null @@ -1,23 +0,0 @@ -Re-introduce the 'nand read.oob' and 'nand write.oob' commands -that used to exist with the legacy NAND code - -Signed-off-by: Harald Welte <laforge@openmoko.org> -Index: u-boot.git/common/cmd_nand.c -=================================================================== ---- u-boot.git.orig/common/cmd_nand.c 2007-01-26 15:41:13.000000000 +0100 -+++ u-boot.git/common/cmd_nand.c 2007-01-26 15:49:37.000000000 +0100 -@@ -351,6 +351,14 @@ - opts.quiet = quiet; - ret = nand_write_opts(nand, &opts); - } -+ } else if (s != NULL && !strcmp(s, ".oob")) { -+ /* read out-of-band data */ -+ if (read) -+ ret = nand->read_oob(nand, off, size, &size, -+ (u_char *) addr); -+ else -+ ret = nand->write_oob(nand, off, size, &size, -+ (u_char *) addr); - } else { - if (read) - ret = nand_read(nand, off, &size, (u_char *)addr); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/neo1973-chargefast.patch b/packages/uboot/u-boot-mkimage-gta01-native/neo1973-chargefast.patch deleted file mode 100644 index 6f6af2c758..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/neo1973-chargefast.patch +++ /dev/null @@ -1,316 +0,0 @@ -Index: u-boot/drivers/usbtty.c -=================================================================== ---- u-boot.orig/drivers/usbtty.c -+++ u-boot/drivers/usbtty.c -@@ -66,7 +66,7 @@ - /* - * Defines - */ --#define NUM_CONFIGS 1 -+#define NUM_CONFIGS 2 - #define MAX_INTERFACES 2 - #define NUM_ENDPOINTS 3 - #define ACM_TX_ENDPOINT 3 -@@ -192,8 +192,7 @@ - #endif - .bConfigurationValue = 1, - .iConfiguration = STR_CONFIG, -- .bmAttributes = -- BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, -+ .bmAttributes = BMATTRIBUTE_RESERVED, - .bMaxPower = USBTTY_MAXPOWER - }, - /* Interface 1 */ -@@ -294,6 +293,120 @@ - .func_dfu = DFU_FUNC_DESC, - #endif - }, -+ { -+ .configuration_desc ={ -+ .bLength = -+ sizeof(struct usb_configuration_descriptor), -+ .bDescriptorType = USB_DT_CONFIG, -+ .wTotalLength = -+ cpu_to_le16(sizeof(struct acm_config_desc) -+#ifdef CONFIG_USBD_DFU -+ - sizeof(struct usb_interface_descriptor) -+ - sizeof(struct usb_dfu_func_descriptor) -+#endif -+ ), -+ .bNumInterfaces = NUM_ACM_INTERFACES, -+ .bConfigurationValue = 2, -+ .iConfiguration = STR_CONFIG, -+ .bmAttributes = BMATTRIBUTE_RESERVED, -+ .bMaxPower = 50, /* 100mA */ -+ }, -+ /* Interface 1 */ -+ .interface_desc = { -+ .bLength = sizeof(struct usb_interface_descriptor), -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0, -+ .bAlternateSetting = 0, -+ .bNumEndpoints = 0x01, -+ .bInterfaceClass = -+ COMMUNICATIONS_INTERFACE_CLASS_CONTROL, -+ .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS, -+ .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL, -+ .iInterface = STR_CTRL_INTERFACE, -+ }, -+ .usb_class_header = { -+ .bFunctionLength = -+ sizeof(struct usb_class_header_function_descriptor), -+ .bDescriptorType = CS_INTERFACE, -+ .bDescriptorSubtype = USB_ST_HEADER, -+ .bcdCDC = cpu_to_le16(110), -+ }, -+ .usb_class_call_mgt = { -+ .bFunctionLength = -+ sizeof(struct usb_class_call_management_descriptor), -+ .bDescriptorType = CS_INTERFACE, -+ .bDescriptorSubtype = USB_ST_CMF, -+ .bmCapabilities = 0x00, -+ .bDataInterface = 0x01, -+ }, -+ .usb_class_acm = { -+ .bFunctionLength = -+ sizeof(struct usb_class_abstract_control_descriptor), -+ .bDescriptorType = CS_INTERFACE, -+ .bDescriptorSubtype = USB_ST_ACMF, -+ .bmCapabilities = 0x00, -+ }, -+ .usb_class_union = { -+ .bFunctionLength = -+ sizeof(struct usb_class_union_function_descriptor), -+ .bDescriptorType = CS_INTERFACE, -+ .bDescriptorSubtype = USB_ST_UF, -+ .bMasterInterface = 0x00, -+ .bSlaveInterface0 = 0x01, -+ }, -+ .notification_endpoint = { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x01 | USB_DIR_IN, -+ .bmAttributes = USB_ENDPOINT_XFER_INT, -+ .wMaxPacketSize -+ = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ -+ /* Interface 2 */ -+ .data_class_interface = { -+ .bLength = -+ sizeof(struct usb_interface_descriptor), -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0x01, -+ .bAlternateSetting = 0x00, -+ .bNumEndpoints = 0x02, -+ .bInterfaceClass = -+ COMMUNICATIONS_INTERFACE_CLASS_DATA, -+ .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE, -+ .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE, -+ .iInterface = STR_DATA_INTERFACE, -+ }, -+ .data_endpoints = { -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x02 | USB_DIR_OUT, -+ .bmAttributes = -+ USB_ENDPOINT_XFER_BULK, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x03 | USB_DIR_IN, -+ .bmAttributes = -+ USB_ENDPOINT_XFER_BULK, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ }, -+ /* We don't add the DFU functional descriptor here since we only -+ * want to do DFU in the high-current charging mode for safety reasons */ -+ }, -+ - }; - - static struct rs232_emu rs232_desc={ -@@ -330,8 +443,7 @@ - .bNumInterfaces = NUM_GSERIAL_INTERFACES, - .bConfigurationValue = 1, - .iConfiguration = STR_CONFIG, -- .bmAttributes = -- BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, -+ .bmAttributes = BMATTRIBUTE_RESERVED, - .bMaxPower = USBTTY_MAXPOWER - }, - .interface_desc = { -@@ -384,6 +496,68 @@ - }, - }, - }, -+ { -+ .configuration_desc ={ -+ .bLength = sizeof(struct usb_configuration_descriptor), -+ .bDescriptorType = USB_DT_CONFIG, -+ .wTotalLength = -+ cpu_to_le16(sizeof(struct gserial_config_desc)), -+ .bNumInterfaces = NUM_GSERIAL_INTERFACES, -+ .bConfigurationValue = 1, -+ .iConfiguration = STR_CONFIG, -+ .bmAttributes = BMATTRIBUTE_RESERVED, -+ .bMaxPower = 50 -+ }, -+ .interface_desc = { -+ { -+ .bLength = -+ sizeof(struct usb_interface_descriptor), -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0, -+ .bAlternateSetting = 0, -+ .bNumEndpoints = NUM_ENDPOINTS, -+ .bInterfaceClass = -+ COMMUNICATIONS_INTERFACE_CLASS_VENDOR, -+ .bInterfaceSubClass = -+ COMMUNICATIONS_NO_SUBCLASS, -+ .bInterfaceProtocol = -+ COMMUNICATIONS_NO_PROTOCOL, -+ .iInterface = STR_DATA_INTERFACE -+ }, -+ }, -+ .data_endpoints = { -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x01 | USB_DIR_OUT, -+ .bmAttributes = USB_ENDPOINT_XFER_BULK, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE), -+ .bInterval= 0xFF, -+ }, -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x02 | USB_DIR_IN, -+ .bmAttributes = USB_ENDPOINT_XFER_BULK, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x03 | USB_DIR_IN, -+ .bmAttributes = USB_ENDPOINT_XFER_INT, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ }, -+ }, - }; - - /* -@@ -679,12 +853,14 @@ - bus_instance->maxpacketsize = 64; - bus_instance->serial_number_str = serial_number; - -- /* configuration instance */ -- memset (config_instance, 0, -- sizeof (struct usb_configuration_instance)); -- config_instance->interfaces = interface_count; -- config_instance->configuration_descriptor = configuration_descriptor; -- config_instance->interface_instance_array = interface_instance; -+ /* configuration instances */ -+ for (i = 0; i < NUM_CONFIGS; i++) { -+ memset(&config_instance[i], 0, sizeof(config_instance)); -+ config_instance[i].interfaces = interface_count; -+ /* FIXME: this breaks for the non-ACM case */ -+ config_instance[i].configuration_descriptor = &acm_configuration_descriptors[i]; -+ config_instance[i].interface_instance_array = interface_instance; -+ } - - /* interface instance */ - memset (interface_instance, 0, -@@ -1043,9 +1219,17 @@ - usbtty_configured_flag = 0; - break; - case DEVICE_CONFIGURED: -+ printf("DEVICE_CONFIGURED: %u\n", device->configuration); -+ if (device->configuration == 1) -+ udc_ctrl(UDC_CTRL_500mA_ENABLE, 1); -+ else -+ udc_ctrl(UDC_CTRL_500mA_ENABLE, 0); - usbtty_configured_flag = 1; - break; -- -+ case DEVICE_DE_CONFIGURED: -+ printf("DEVICE_DE_CONFIGURED\n"); -+ udc_ctrl(UDC_CTRL_500mA_ENABLE, 0); -+ break; - case DEVICE_ADDRESS_ASSIGNED: - usbtty_init_endpoints (); - -Index: u-boot/drivers/usbtty.h -=================================================================== ---- u-boot.orig/drivers/usbtty.h -+++ u-boot/drivers/usbtty.h -@@ -60,7 +60,7 @@ - #define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS - - #define USBTTY_BCD_DEVICE 0x00 --#define USBTTY_MAXPOWER 0x00 -+#define USBTTY_MAXPOWER 250 /* 500mA */ - - #define STR_LANG 0x00 - #define STR_MANUFACTURER 0x01 -Index: u-boot/board/neo1973/common/udc.c -=================================================================== ---- u-boot.orig/board/neo1973/common/udc.c -+++ u-boot/board/neo1973/common/udc.c -@@ -2,6 +2,7 @@ - #include <common.h> - #include <usbdcore.h> - #include <s3c2410.h> -+#include <pcf50606.h> - - void udc_ctrl(enum usbd_event event, int param) - { -@@ -17,6 +18,13 @@ - gpio->GPBDAT &= ~(1 << 9); - #endif - break; -+ case UDC_CTRL_500mA_ENABLE: -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) || \ -+ defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ -+ defined(CONFIG_ARCH_GTA01B_v4) -+ pcf50606_charge_autofast(param); -+#endif -+ break; - default: - break; - } -Index: u-boot/include/usbdcore.h -=================================================================== ---- u-boot.orig/include/usbdcore.h -+++ u-boot/include/usbdcore.h -@@ -686,8 +686,8 @@ - - enum usbd_event { - UDC_CTRL_PULLUP_ENABLE, -+ UDC_CTRL_500mA_ENABLE, - }; - - void udc_ctrl(enum usbd_event event, int param); - #endif --#endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/preboot-override.patch b/packages/uboot/u-boot-mkimage-gta01-native/preboot-override.patch deleted file mode 100644 index f32cbde27b..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/preboot-override.patch +++ /dev/null @@ -1,137 +0,0 @@ -Provide a place where the loader can patch the binary, such that it executes a -command string from RAM. We use this for automated installs, where we can thus -use the same u-boot binary for all stages. - -include/configs/neo1973.h: new option CFG_PREBOOT_OVERRIDE to allow setting of - the preboot command in memory -cpu/arm920t/start.S: added variable "preboot_override" at known location - (_start+0x40) -common/main.c (main_loop): if preboot_override is set, execute the command - string found there -common/env_common.c (env_relocate): if preboot_override is set, always use the - default environment - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S -+++ u-boot/cpu/arm920t/start.S -@@ -77,6 +77,14 @@ _fiq: .word fiq - ************************************************************************* - */ - -+ -+/* Must follow the .balign above, so we get a well-known address ! */ -+#ifdef CFG_PREBOOT_OVERRIDE -+.globl preboot_override -+preboot_override: -+ .word 0 -+#endif -+ - #ifdef CONFIG_S3C2410_NAND_BOOT - .globl booted_from_nand - booted_from_nand: -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -207,6 +207,7 @@ - #define CFG_ENV_IS_IN_NAND 1 - #define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ - #define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ -+#define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ - - #define NAND_MAX_CHIPS 1 - #define CFG_NAND_BASE 0x4e000000 -Index: u-boot/common/main.c -=================================================================== ---- u-boot.orig/common/main.c -+++ u-boot/common/main.c -@@ -85,6 +85,11 @@ int do_mdm_init = 0; - extern void mdm_init(void); /* defined in board.c */ - #endif - -+#ifdef CFG_PREBOOT_OVERRIDE -+extern char *preboot_override; -+#endif -+ -+ - /*************************************************************************** - * Watch for 'delay' seconds for autoboot stop or autoboot delay string. - * returns: 0 - no key string, allow autoboot -@@ -306,8 +311,8 @@ void main_loop (void) - char *s; - int bootdelay; - #endif --#ifdef CONFIG_PREBOOT -- char *p; -+#if defined(CONFIG_PREBOOT) || defined(CFG_PREBOOT_OVERRIDE) -+ char *p = NULL; - #endif - #ifdef CONFIG_BOOTCOUNT_LIMIT - unsigned long bootcount = 0; -@@ -364,8 +369,23 @@ void main_loop (void) - install_auto_complete(); - #endif - -+#if defined(CONFIG_PREBOOT) || defined(CFG_PREBOOT_OVERRIDE) - #ifdef CONFIG_PREBOOT -- if ((p = getenv ("preboot")) != NULL) { -+ p = getenv ("preboot"); -+#endif -+#ifdef CFG_PREBOOT_OVERRIDE -+ if (preboot_override) { -+ /* for convenience, preboot_override may end in \n, not \0 */ -+ p = strchr(preboot_override, '\n'); -+ if (p) -+ *p = 0; -+ /* make sure we can overwrite the load area if we want to */ -+ p = strdup(preboot_override); -+ /* clean the image in case we want to flash it */ -+ preboot_override = NULL; -+ } -+#endif /* CFG_PREBOOT_OVERRIDE */ -+ if (p) { - # ifdef CONFIG_AUTOBOOT_KEYED - int prev = disable_ctrlc(1); /* disable Control C checking */ - # endif -@@ -381,7 +401,7 @@ void main_loop (void) - disable_ctrlc(prev); /* restore Control C checking */ - # endif - } --#endif /* CONFIG_PREBOOT */ -+#endif /* CONFIG_PREBOOT || CFG_PREBOOT_OVERRIDE */ - - #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) - s = getenv ("bootdelay"); -Index: u-boot/common/env_common.c -=================================================================== ---- u-boot.orig/common/env_common.c -+++ u-boot/common/env_common.c -@@ -37,6 +37,10 @@ - # define SHOW_BOOT_PROGRESS(arg) - #endif - -+#ifdef CFG_PREBOOT_OVERRIDE -+extern char *preboot_override; -+#endif -+ - DECLARE_GLOBAL_DATA_PTR; - - #ifdef CONFIG_AMIGAONEG3SE -@@ -234,7 +238,14 @@ void env_relocate (void) - puts ("*** Warning - bad CRC, using default environment\n\n"); - SHOW_BOOT_PROGRESS (-1); - #endif -+ } -+ -+#ifdef CFG_PREBOOT_OVERRIDE -+ if (preboot_override) -+ gd->env_valid = 0; -+#endif - -+ if (gd->env_valid == 0) { - if (sizeof(default_environment) > ENV_SIZE) - { - puts ("*** Error - default environment is too large\n\n"); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/raise-limits.patch b/packages/uboot/u-boot-mkimage-gta01-native/raise-limits.patch deleted file mode 100644 index a1c381a2cf..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/raise-limits.patch +++ /dev/null @@ -1,31 +0,0 @@ -include/configs/neo1973.h: increase heap from 128 kB to 400 kB, for BMP image - decompression - [ note: increasing it to 512 kB trips over something. note sure what. - find out. ] -include/configs/neo1973.h: raise number of command line arguments from 16 to 64 - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -54,7 +54,8 @@ - /* - * Size of malloc() pool - */ --#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024) -+ /* >> CFG_VIDEO_LOGO_MAX_SIZE */ - #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - - /* -@@ -142,7 +143,7 @@ - #endif - #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ - #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ --#define CFG_MAXARGS 16 /* max number of command args */ -+#define CFG_MAXARGS 64 /* max number of command args */ - #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - - #define CFG_MEMTEST_START 0x30000000 /* memtest works on */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/series b/packages/uboot/u-boot-mkimage-gta01-native/series deleted file mode 100644 index 4fc7d1342f..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/series +++ /dev/null @@ -1,76 +0,0 @@ -# just some local hacks -uboot-machtypes.patch -ext2load_hex.patch -uboot-mokoversion.patch - -# those we want to get mainline -uboot-s3c2410-warnings-fix.patch -uboot-strtoul.patch -uboot-cramfs_but_no_jffs2.patch -nand-read_write_oob.patch -uboot-arm920t-gd_in_irq.patch -uboot-arm920_s3c2410_irq_demux.patch -uboot-s3c2410-nand.patch -uboot-cmd_s3c2410.patch -uboot-s3c2410-mmc.patch -env_nand_oob.patch -dynenv-harden.patch -uboot-s3c2410_fb.patch -uboot-20061030-qt2410.patch -uboot-20061030-neo1973.patch - -# under construction, but intended for mainline -uboot-s3c2410-misccr-definitions.patch - -boot-from-ram-reloc.patch -boot-from-ram-and-nand.patch -wakeup-reason-nand-only.patch -uboot-neo1973-resume.patch - -# this will be somewhat more difficult -nand-dynamic_partitions.patch -uboot-s3c2410-norelocate_irqvec_cpy.patch -uboot-usbtty-acm.patch -uboot-s3c2410_udc.patch - -# those need to be cleaned up -bbt-create-optional.patch -nand-createbbt.patch -dontask.patch -nand-badisbad.patch -uboot-bbt-quiet.patch - -# splash screen -raise-limits.patch -splashimage-command.patch -cmd-unzip.patch -enable-splash-bmp.patch - -# for automated installation -preboot-override.patch -lowlevel_foo.patch - -# move these later, once the dust has settled -default-env.patch -console-ansi.patch -boot-menu.patch - -# those have to be implemented fully -uboot-dfu.patch -uboot-neo1973-defaultenv.patch -uboot-nand-markbad-reallybad.patch -usbdcore-multiple_configs.patch -neo1973-chargefast.patch - -uboot-s3c2440.patch -uboot-smdk2440.patch -uboot-hxd8.patch - -uboot-license.patch - -uboot-gta02.patch -uboot-s3c2443.patch -uboot-smdk2443.patch - -# for review, merge soon -unbusy-i2c.patch diff --git a/packages/uboot/u-boot-mkimage-gta01-native/splashimage-command.patch b/packages/uboot/u-boot-mkimage-gta01-native/splashimage-command.patch deleted file mode 100644 index 8ea48cf484..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/splashimage-command.patch +++ /dev/null @@ -1,24 +0,0 @@ -drivers/cfb_console.c (video_logo): if "splashimage" doesn't contain an - address, use its content as a command - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/drivers/cfb_console.c -=================================================================== ---- u-boot.orig/drivers/cfb_console.c -+++ u-boot/drivers/cfb_console.c -@@ -1121,7 +1121,13 @@ static void *video_logo (void) - ulong addr; - - if ((s = getenv ("splashimage")) != NULL) { -- addr = simple_strtoul (s, NULL, 16); -+ char *end; -+ -+ addr = simple_strtoul (s, &end, 16); -+ if (*end) { -+ run_command(s, 0); -+ return video_fb_address; -+ } - - if (video_display_bitmap (addr, 0, 0) == 0) { - return ((void *) (video_fb_address)); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-neo1973.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-neo1973.patch deleted file mode 100644 index 7c70244b38..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-neo1973.patch +++ /dev/null @@ -1,2248 +0,0 @@ -This patch adds neo1973 'board' (FIC Neo1973 phone) support to u-boot. -Specifically, it adds support for the GTA01v3, GTA01v4, GTA01Bv2 and -GTA01Bv3 hardware revisions. - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/Makefile -=================================================================== ---- u-boot.orig/Makefile -+++ u-boot/Makefile -@@ -2009,6 +2009,14 @@ - sbc2410x_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 - -+gta01_config \ -+gta01v3_config \ -+gta01bv2_config \ -+gta01bv3_config \ -+gta01bv4_config \ -+gta01v4_config : unconfig -+ @sh board/neo1973/gta01/split_by_variant.sh $@ -+ - qt2410_config : unconfig - @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 - -Index: u-boot/common/main.c -=================================================================== ---- u-boot.orig/common/main.c -+++ u-boot/common/main.c -@@ -61,6 +61,7 @@ - #undef DEBUG_PARSER - - char console_buffer[CFG_CBSIZE]; /* console I/O buffer */ -+int nobootdelay; - - #ifndef CONFIG_CMDLINE_EDITING - static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen); -@@ -376,7 +377,7 @@ - - debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>"); - -- if (bootdelay >= 0 && s && !abortboot (bootdelay)) { -+ if (!nobootdelay && bootdelay >= 0 && s && !abortboot (bootdelay)) { - # ifdef CONFIG_AUTOBOOT_KEYED - int prev = disable_ctrlc(1); /* disable Control C checking */ - # endif -Index: u-boot/drivers/Makefile -=================================================================== ---- u-boot.orig/drivers/Makefile -+++ u-boot/drivers/Makefile -@@ -50,6 +50,7 @@ - usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \ - videomodes.o w83c553f.o \ - ks8695eth.o \ -+ pcf50606.o \ - pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ - rpx_pcmcia.o \ - fsl_i2c.o s3c2410_fb.o -Index: u-boot/drivers/pcf50606.c -=================================================================== ---- /dev/null -+++ u-boot/drivers/pcf50606.c -@@ -0,0 +1,112 @@ -+ -+#include <common.h> -+ -+#ifdef CONFIG_DRIVER_PCF50606 -+ -+#include <i2c.h> -+#include <pcf50606.h> -+#include <asm/atomic.h> -+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -+ -+#define PCF50606_I2C_ADDR 0x08 -+ -+void __pcf50606_reg_write(u_int8_t reg, u_int8_t val) -+{ -+ i2c_write(PCF50606_I2C_ADDR, reg, 1, &val, 1); -+} -+ -+u_int8_t __pcf50606_reg_read(u_int8_t reg) -+{ -+ u_int8_t tmp; -+ i2c_read(PCF50606_I2C_ADDR, reg, 1, &tmp, 1); -+ return tmp; -+} -+ -+void pcf50606_reg_write(u_int8_t reg, u_int8_t val) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ __pcf50606_reg_write(reg, val); -+ local_irq_restore(flags); -+} -+ -+u_int8_t pcf50606_reg_read(u_int8_t reg) -+{ -+ unsigned long flags; -+ u_int8_t tmp; -+ -+ local_irq_save(flags); -+ tmp = __pcf50606_reg_read(reg); -+ local_irq_restore(flags); -+ -+ return tmp; -+} -+ -+void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val) -+{ -+ unsigned long flags; -+ u_int8_t tmp; -+ -+ local_irq_save(flags); -+ tmp = __pcf50606_reg_read(reg); -+ __pcf50606_reg_write(reg, (val & mask) | (tmp & ~mask)); -+ local_irq_restore(flags); -+} -+ -+void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits) -+{ -+ unsigned long flags; -+ u_int8_t tmp; -+ -+ local_irq_save(flags); -+ tmp = pcf50606_reg_read(reg); -+ pcf50606_reg_write(reg, (tmp & ~bits)); -+ local_irq_restore(flags); -+} -+ -+static const u_int8_t regs_valid[] = { -+ PCF50606_REG_OOCS, PCF50606_REG_INT1M, PCF50606_REG_INT2M, -+ PCF50606_REG_INT3M, PCF50606_REG_OOCC1, PCF50606_REG_OOCC2, -+ PCF50606_REG_PSSC, PCF50606_REG_PWROKM, PCF50606_REG_DCDC1, -+ PCF50606_REG_DCDC2, PCF50606_REG_DCDC3, PCF50606_REG_DCDC4, -+ PCF50606_REG_DCDEC1, PCF50606_REG_DCDEC2, PCF50606_REG_DCUDC1, -+ PCF50606_REG_DCUDC2, PCF50606_REG_IOREGC, PCF50606_REG_D1REGC1, -+ PCF50606_REG_D2REGC1, PCF50606_REG_D3REGC1, PCF50606_REG_LPREGC1, -+ PCF50606_REG_LPREGC2, PCF50606_REG_MBCC1, PCF50606_REG_MBCC2, -+ PCF50606_REG_MBCC3, PCF50606_REG_BBCC, PCF50606_REG_ADCC1, -+ PCF50606_REG_ADCC2, PCF50606_REG_ACDC1, PCF50606_REG_BVMC, -+ PCF50606_REG_PWMC1, PCF50606_REG_LEDC1, PCF50606_REG_LEDC2, -+ PCF50606_REG_GPOC1, PCF50606_REG_GPOC2, PCF50606_REG_GPOC3, -+ PCF50606_REG_GPOC4, PCF50606_REG_GPOC5, -+}; -+ -+ -+/* initialize PCF50606 register set */ -+void pcf50606_init(void) -+{ -+ unsigned long flags; -+ int i; -+ -+ local_irq_save(flags); -+ for (i = 0; i < ARRAY_SIZE(regs_valid); i++) { -+ __pcf50606_reg_write(regs_valid[i], -+ pcf50606_initial_regs[regs_valid[i]]); -+ } -+ local_irq_restore(flags); -+} -+ -+void pcf50606_charge_autofast(int on) -+{ -+ if (on) { -+ printf("Enabling automatic fast charge\n"); -+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, -+ PCF50606_MBCC1_AUTOFST, -+ PCF50606_MBCC1_AUTOFST); -+ } else { -+ printf("Disabling fast charge\n"); -+ pcf50606_reg_write(PCF50606_REG_MBCC1, 0x00); -+ } -+} -+ -+#endif /* CONFIG DRIVER_PCF50606 */ -Index: u-boot/include/pcf50606.h -=================================================================== ---- /dev/null -+++ u-boot/include/pcf50606.h -@@ -0,0 +1,273 @@ -+#ifndef _PCF50606_H -+#define _PCF50606_H -+ -+/* Philips PCF50606 Power Managemnt Unit (PMU) driver -+ * (C) 2006-2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ */ -+ -+enum pfc50606_regs { -+ PCF50606_REG_ID = 0x00, -+ PCF50606_REG_OOCS = 0x01, -+ PCF50606_REG_INT1 = 0x02, /* Interrupt Status */ -+ PCF50606_REG_INT2 = 0x03, /* Interrupt Status */ -+ PCF50606_REG_INT3 = 0x04, /* Interrupt Status */ -+ PCF50606_REG_INT1M = 0x05, /* Interrupt Mask */ -+ PCF50606_REG_INT2M = 0x06, /* Interrupt Mask */ -+ PCF50606_REG_INT3M = 0x07, /* Interrupt Mask */ -+ PCF50606_REG_OOCC1 = 0x08, -+ PCF50606_REG_OOCC2 = 0x09, -+ PCF50606_REG_RTCSC = 0x0a, /* Second */ -+ PCF50606_REG_RTCMN = 0x0b, /* Minute */ -+ PCF50606_REG_RTCHR = 0x0c, /* Hour */ -+ PCF50606_REG_RTCWD = 0x0d, /* Weekday */ -+ PCF50606_REG_RTCDT = 0x0e, /* Day */ -+ PCF50606_REG_RTCMT = 0x0f, /* Month */ -+ PCF50606_REG_RTCYR = 0x10, /* Year */ -+ PCF50606_REG_RTCSCA = 0x11, /* Alarm Second */ -+ PCF50606_REG_RTCMNA = 0x12, /* Alarm Minute */ -+ PCF50606_REG_RTCHRA = 0x13, /* Alarm Hour */ -+ PCF50606_REG_RTCWDA = 0x14, /* Alarm Weekday */ -+ PCF50606_REG_RTCDTA = 0x15, /* Alarm Day */ -+ PCF50606_REG_RTCMTA = 0x16, /* Alarm Month */ -+ PCF50606_REG_RTCYRA = 0x17, /* Alarm Year */ -+ PCF50606_REG_PSSC = 0x18, /* Power sequencing */ -+ PCF50606_REG_PWROKM = 0x19, /* PWROK mask */ -+ PCF50606_REG_PWROKS = 0x1a, /* PWROK status */ -+ PCF50606_REG_DCDC1 = 0x1b, -+ PCF50606_REG_DCDC2 = 0x1c, -+ PCF50606_REG_DCDC3 = 0x1d, -+ PCF50606_REG_DCDC4 = 0x1e, -+ PCF50606_REG_DCDEC1 = 0x1f, -+ PCF50606_REG_DCDEC2 = 0x20, -+ PCF50606_REG_DCUDC1 = 0x21, -+ PCF50606_REG_DCUDC2 = 0x22, -+ PCF50606_REG_IOREGC = 0x23, -+ PCF50606_REG_D1REGC1 = 0x24, -+ PCF50606_REG_D2REGC1 = 0x25, -+ PCF50606_REG_D3REGC1 = 0x26, -+ PCF50606_REG_LPREGC1 = 0x27, -+ PCF50606_REG_LPREGC2 = 0x28, -+ PCF50606_REG_MBCC1 = 0x29, -+ PCF50606_REG_MBCC2 = 0x2a, -+ PCF50606_REG_MBCC3 = 0x2b, -+ PCF50606_REG_MBCS1 = 0x2c, -+ PCF50606_REG_BBCC = 0x2d, -+ PCF50606_REG_ADCC1 = 0x2e, -+ PCF50606_REG_ADCC2 = 0x2f, -+ PCF50606_REG_ADCS1 = 0x30, -+ PCF50606_REG_ADCS2 = 0x31, -+ PCF50606_REG_ADCS3 = 0x32, -+ PCF50606_REG_ACDC1 = 0x33, -+ PCF50606_REG_BVMC = 0x34, -+ PCF50606_REG_PWMC1 = 0x35, -+ PCF50606_REG_LEDC1 = 0x36, -+ PCF50606_REG_LEDC2 = 0x37, -+ PCF50606_REG_GPOC1 = 0x38, -+ PCF50606_REG_GPOC2 = 0x39, -+ PCF50606_REG_GPOC3 = 0x3a, -+ PCF50606_REG_GPOC4 = 0x3b, -+ PCF50606_REG_GPOC5 = 0x3c, -+ __NUM_PCF50606_REGS -+}; -+ -+enum pcf50606_reg_oocs { -+ PFC50606_OOCS_ONKEY = 0x01, -+ PCF50606_OOCS_EXTON = 0x02, -+ PCF50606_OOCS_PWROKRST = 0x04, -+ PCF50606_OOCS_BATOK = 0x08, -+ PCF50606_OOCS_BACKOK = 0x10, -+ PCF50606_OOCS_CHGOK = 0x20, -+ PCF50606_OOCS_TEMPOK = 0x40, -+ PCF50606_OOCS_WDTEXP = 0x80, -+}; -+ -+enum pcf50606_reg_oocc1 { -+ PCF50606_OOCC1_GOSTDBY = 0x01, -+ PCF50606_OOCC1_TOTRST = 0x02, -+ PCF50606_OOCC1_CLK32ON = 0x04, -+ PCF50606_OOCC1_WDTRST = 0x08, -+ PCF50606_OOCC1_RTCWAK = 0x10, -+ PCF50606_OOCC1_CHGWAK = 0x20, -+ PCF50606_OOCC1_EXTONWAK_HIGH = 0x40, -+ PCF50606_OOCC1_EXTONWAK_LOW = 0x80, -+ PCF50606_OOCC1_EXTONWAK_NO_WAKEUP = 0x3f, -+}; -+ -+enum pcf50606_reg_oocc2 { -+ PCF50606_OOCC2_ONKEYDB_NONE = 0x00, -+ PCF50606_OOCC2_ONKEYDB_14ms = 0x01, -+ PCF50606_OOCC2_ONKEYDB_62ms = 0x02, -+ PCF50606_OOCC2_ONKEYDB_500ms = 0x03, -+ PCF50606_OOCC2_EXTONDB_NONE = 0x00, -+ PCF50606_OOCC2_EXTONDB_14ms = 0x04, -+ PCF50606_OOCC2_EXTONDB_62ms = 0x08, -+ PCF50606_OOCC2_EXTONDB_500ms = 0x0c, -+}; -+ -+enum pcf50606_reg_int1 { -+ PCF50606_INT1_ONKEYR = 0x01, /* ONKEY rising edge */ -+ PCF50606_INT1_ONKEYF = 0x02, /* ONKEY falling edge */ -+ PCF50606_INT1_ONKEY1S = 0x04, /* OMKEY at least 1sec low */ -+ PCF50606_INT1_EXTONR = 0x08, /* EXTON rising edge */ -+ PCF50606_INT1_EXTONF = 0x10, /* EXTON falling edge */ -+ PCF50606_INT1_SECOND = 0x40, /* RTC periodic second interrupt */ -+ PCF50606_INT1_ALARM = 0x80, /* RTC alarm time is reached */ -+}; -+ -+enum pcf50606_reg_int2 { -+ PCF50606_INT2_CHGINS = 0x01, /* Charger inserted */ -+ PCF50606_INT2_CHGRM = 0x02, /* Charger removed */ -+ PCF50606_INT2_CHGFOK = 0x04, /* Fast charging OK */ -+ PCF50606_INT2_CHGERR = 0x08, /* Error in charging mode */ -+ PCF50606_INT2_CHGFRDY = 0x10, /* Fast charge completed */ -+ PCF50606_INT2_CHGPROT = 0x20, /* Charging protection interrupt */ -+ PCF50606_INT2_CHGWD10S = 0x40, /* Charger watchdig expires in 10s */ -+ PCF50606_INT2_CHGWDEXP = 0x80, /* Charger watchdog expires */ -+}; -+ -+enum pcf50606_reg_int3 { -+ PCF50606_INT3_ADCRDY = 0x01, /* ADC conversion finished */ -+ PCF50606_INT3_ACDINS = 0x02, /* Accessory inserted */ -+ PCF50606_INT3_ACDREM = 0x04, /* Accessory removed */ -+ PCF50606_INT3_TSCPRES = 0x08, /* Touch screen pressed */ -+ PCF50606_INT3_LOWBAT = 0x40, /* Low battery voltage */ -+ PCF50606_INT3_HIGHTMP = 0x80, /* High temperature */ -+}; -+ -+/* used by PSSC, PWROKM, PWROKS, */ -+enum pcf50606_regu { -+ PCF50606_REGU_DCD = 0x01, /* DCD in phase 2 */ -+ PCF50606_REGU_DCDE = 0x02, /* DCDE in phase 2 */ -+ PCF50606_REGU_DCUD = 0x04, /* DCDU in phase 2 */ -+ PCF50606_REGU_IO = 0x08, /* IO in phase 2 */ -+ PCF50606_REGU_D1 = 0x10, /* D1 in phase 2 */ -+ PCF50606_REGU_D2 = 0x20, /* D2 in phase 2 */ -+ PCF50606_REGU_D3 = 0x40, /* D3 in phase 2 */ -+ PCF50606_REGU_LP = 0x80, /* LP in phase 2 */ -+}; -+ -+enum pcf50606_reg_dcdc4 { -+ PCF50606_DCDC4_MODE_AUTO = 0x00, -+ PCF50606_DCDC4_MODE_PWM = 0x01, -+ PCF50606_DCDC4_MODE_PCF = 0x02, -+ PCF50606_DCDC4_OFF_FLOAT = 0x00, -+ PCF50606_DCDC4_OFF_BYPASS = 0x04, -+ PCF50606_DCDC4_OFF_PULLDOWN = 0x08, -+ PCF50606_DCDC4_CURLIM_500mA = 0x00, -+ PCF50606_DCDC4_CURLIM_750mA = 0x10, -+ PCF50606_DCDC4_CURLIM_1000mA = 0x20, -+ PCF50606_DCDC4_CURLIM_1250mA = 0x30, -+ PCF50606_DCDC4_TOGGLE = 0x40, -+ PCF50606_DCDC4_REGSEL_DCDC2 = 0x80, -+}; -+ -+enum pcf50606_reg_dcdec2 { -+ PCF50606_DCDEC2_MODE_AUTO = 0x00, -+ PCF50606_DCDEC2_MODE_PWM = 0x01, -+ PCF50606_DCDEC2_MODE_PCF = 0x02, -+ PCF50606_DCDEC2_OFF_FLOAT = 0x00, -+ PCF50606_DCDEC2_OFF_BYPASS = 0x04, -+}; -+ -+enum pcf50606_reg_dcudc2 { -+ PCF50606_DCUDC2_MODE_AUTO = 0x00, -+ PCF50606_DCUDC2_MODE_PWM = 0x01, -+ PCF50606_DCUDC2_MODE_PCF = 0x02, -+ PCF50606_DCUDC2_OFF_FLOAT = 0x00, -+ PCF50606_DCUDC2_OFF_BYPASS = 0x04, -+}; -+ -+enum pcf50606_reg_adcc1 { -+ PCF50606_ADCC1_TSCMODACT = 0x01, -+ PCF50606_ADCC1_TSCMODSTB = 0x02, -+ PCF50606_ADCC1_TRATSET = 0x04, -+ PCF50606_ADCC1_NTCSWAPE = 0x08, -+ PCF50606_ADCC1_NTCSWAOFF = 0x10, -+ PCF50606_ADCC1_EXTSYNCBREAK = 0x20, -+ /* reserved */ -+ PCF50606_ADCC1_TSCINT = 0x80, -+}; -+ -+enum pcf50606_reg_adcc2 { -+ PCF50606_ADCC2_ADCSTART = 0x01, -+ /* see enum pcf50606_adcc2_adcmux */ -+ PCF50606_ADCC2_SYNC_NONE = 0x00, -+ PCF50606_ADCC2_SYNC_TXON = 0x20, -+ PCF50606_ADCC2_SYNC_PWREN1 = 0x40, -+ PCF50606_ADCC2_SYNC_PWREN2 = 0x60, -+ PCF50606_ADCC2_RES_10BIT = 0x00, -+ PCF50606_ADCC2_RES_8BIT = 0x80, -+}; -+ -+#define PCF50606_ADCC2_ADCMUX_MASK (0xf << 1) -+ -+#define ADCMUX_SHIFT 1 -+enum pcf50606_adcc2_adcmux { -+ PCF50606_ADCMUX_BATVOLT_RES = 0x0 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_BATVOLT_SUBTR = 0x1 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN1_RES = 0x2 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN1_SUBTR = 0x3 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_BATTEMP = 0x4 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN2 = 0x5 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN3 = 0x6 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN3_RATIO = 0x7 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_XPOS = 0x8 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_YPOS = 0x9 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_P1 = 0xa << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_P2 = 0xb << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_BATVOLT_ADCIN1 = 0xc << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_XY_SEQUENCE = 0xe << ADCMUX_SHIFT, -+ PCF50606_P1_P2_RESISTANCE = 0xf << ADCMUX_SHIFT, -+}; -+ -+enum pcf50606_adcs2 { -+ PCF50606_ADCS2_ADCRDY = 0x80, -+}; -+ -+enum pcf50606_reg_mbcc1 { -+ PCF50606_MBCC1_CHGAPE = 0x01, -+ PCF50606_MBCC1_AUTOFST = 0x02, -+#define PCF50606_MBCC1_CHGMOD_MASK 0x1c -+#define PCF50606_MBCC1_CHGMOD_SHIFT 2 -+ PCF50606_MBCC1_CHGMOD_QUAL = 0x00, -+ PCF50606_MBCC1_CHGMOD_PRE = 0x04, -+ PCF50606_MBCC1_CHGMOD_TRICKLE = 0x08, -+ PCF50606_MBCC1_CHGMOD_FAST_CCCV = 0x0c, -+ PCF50606_MBCC1_CHGMOD_FAST_NOCC = 0x10, -+ PCF50606_MBCC1_CHGMOD_FAST_NOCV = 0x14, -+ PCF50606_MBCC1_CHGMOD_FAST_SW = 0x18, -+ PCF50606_MBCC1_CHGMOD_IDLE = 0x1c, -+ PCF50606_MBCC1_DETMOD_LOWCHG = 0x20, -+ PCF50606_MBCC1_DETMOD_WDRST = 0x40, -+}; -+ -+enum pcf50606_reg_bvmc { -+ PCF50606_BVMC_LOWBAT = 0x01, -+ PCF50606_BVMC_THRSHLD_NULL = 0x00, -+ PCF50606_BVMC_THRSHLD_2V8 = 0x02, -+ PCF50606_BVMC_THRSHLD_2V9 = 0x04, -+ PCF50606_BVMC_THRSHLD_3V = 0x08, -+ PCF50606_BVMC_THRSHLD_3V1 = 0x08, -+ PCF50606_BVMC_THRSHLD_3V2 = 0x0a, -+ PCF50606_BVMC_THRSHLD_3V3 = 0x0c, -+ PCF50606_BVMC_THRSHLD_3V4 = 0x0e, -+ PCF50606_BVMC_DISDB = 0x10, -+}; -+ -+/* this is to be provided by the board implementation */ -+extern const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS]; -+ -+void pcf50606_reg_write(u_int8_t reg, u_int8_t val); -+ -+u_int8_t pcf50606_reg_read(u_int8_t reg); -+ -+void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val); -+void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits); -+ -+void pcf50606_init(void); -+void pcf50606_charge_autofast(int on); -+ -+#endif /* _PCF50606_H */ -+ -Index: u-boot/board/neo1973/common/cmd_neo1973.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/cmd_neo1973.c -@@ -0,0 +1,99 @@ -+/* -+ * (C) Copyright 2006 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * Boot support -+ */ -+#include <common.h> -+#include <command.h> -+#include <net.h> /* for print_IPaddr */ -+#include <s3c2410.h> -+ -+#include "neo1973.h" -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#if (CONFIG_COMMANDS & CFG_CMD_BDI) -+ -+int do_neo1973 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -+{ -+ int i; -+ -+ if (!strcmp(argv[1], "info")) { -+ printf("FIC Neo1973 Hardware Revision 0x%04x\n", get_board_rev()); -+ } else if (!strcmp(argv[1], "power-off")) { -+ neo1973_poweroff(); -+ } else if (!strcmp(argv[1], "charger") || !strcmp(argv[1], "charge")) { -+ if (argc < 3) -+ goto out_help; -+ if (!strcmp(argv[2], "status") || !strcmp(argv[2], "state")) { -+ printf("%s\n", neo1973_get_charge_status()); -+ } else if (!strcmp(argv[2], "autofast")) { -+ neo1973_set_charge_mode(NEO1973_CHGCMD_AUTOFAST); -+ } else if (!strcmp(argv[2], "!autofast")) { -+ neo1973_set_charge_mode(NEO1973_CHGCMD_NO_AUTOFAST); -+ } else if (!strcmp(argv[2], "off")) { -+ neo1973_set_charge_mode(NEO1973_CHGCMD_OFF); -+ } else if (!strcmp(argv[2], "fast")) { -+ neo1973_set_charge_mode(NEO1973_CHGCMD_FAST); -+ } else -+ goto out_help; -+ } else if (!strcmp(argv[1], "backlight")) { -+ if (argc < 3) -+ goto out_help; -+ if (!strcmp(argv[2], "on")) -+ neo1973_backlight(1); -+ else -+ neo1973_backlight(0); -+ } else if (!strcmp(argv[1], "vibrator")) { -+ if (argc < 3) -+ goto out_help; -+ if (!strcmp(argv[2], "on")) -+ neo1973_vibrator(1); -+ else -+ neo1973_vibrator(0); -+ } else { -+out_help: -+ printf("Usage:\n%s\n", cmdtp->usage); -+ return 1; -+ } -+ -+ return 0; -+} -+ -+/* -------------------------------------------------------------------- */ -+ -+U_BOOT_CMD( -+ neo1973, 4, 1, do_neo1973, -+ "neo1973 - phone specific commands\n", -+ "neo1973 info - display phone informantion\n" -+ "neo1973 power-off - switch off the phone\n" -+ "neo1973 charger status - display charger status\n" -+ "neo1973 charger autofast - enable automatic fast (500mA) charging\n" -+ "neo1973 charger !autofast - disable automatic fast (500mA) charging\n" -+ "neo1973 charger fast - enable fast (500mA) charging\n" -+ "neo1973 charger off - disable charging\n" -+ "neo1973 backlight (on|off) - switch backlight on or off\n" -+ "neo1973 vibrator (on|off) - switch vibrator on or off\n" -+); -+#endif /* CFG_CMD_BDI */ -Index: u-boot/board/neo1973/common/jbt6k74.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/jbt6k74.c -@@ -0,0 +1,420 @@ -+/* u-boot driver for the tpo JBT6K74-AS LCM ASIC -+ * -+ * Copyright (C) 2006-2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+#include <common.h> -+#include <spi.h> -+#include <video_fb.h> -+#include <asm/errno.h> -+#include <s3c2410.h> -+#include "jbt6k74.h" -+ -+#if 0 -+#define DEBUGP(x, args...) printf("%s: " x, __FUNCTION__, ## args); -+#define DEBUGPC(x, args...) printf(x, ## args); -+#else -+#define DEBUGP(x, args...) do { } while (0) -+#define DEBUGPC(x, args...) do { } while (0) -+#endif -+ -+ -+enum jbt_register { -+ JBT_REG_SLEEP_IN = 0x10, -+ JBT_REG_SLEEP_OUT = 0x11, -+ -+ JBT_REG_DISPLAY_OFF = 0x28, -+ JBT_REG_DISPLAY_ON = 0x29, -+ -+ JBT_REG_RGB_FORMAT = 0x3a, -+ JBT_REG_QUAD_RATE = 0x3b, -+ -+ JBT_REG_POWER_ON_OFF = 0xb0, -+ JBT_REG_BOOSTER_OP = 0xb1, -+ JBT_REG_BOOSTER_MODE = 0xb2, -+ JBT_REG_BOOSTER_FREQ = 0xb3, -+ JBT_REG_OPAMP_SYSCLK = 0xb4, -+ JBT_REG_VSC_VOLTAGE = 0xb5, -+ JBT_REG_VCOM_VOLTAGE = 0xb6, -+ JBT_REG_EXT_DISPL = 0xb7, -+ JBT_REG_OUTPUT_CONTROL = 0xb8, -+ JBT_REG_DCCLK_DCEV = 0xb9, -+ JBT_REG_DISPLAY_MODE1 = 0xba, -+ JBT_REG_DISPLAY_MODE2 = 0xbb, -+ JBT_REG_DISPLAY_MODE = 0xbc, -+ JBT_REG_ASW_SLEW = 0xbd, -+ JBT_REG_DUMMY_DISPLAY = 0xbe, -+ JBT_REG_DRIVE_SYSTEM = 0xbf, -+ -+ JBT_REG_SLEEP_OUT_FR_A = 0xc0, -+ JBT_REG_SLEEP_OUT_FR_B = 0xc1, -+ JBT_REG_SLEEP_OUT_FR_C = 0xc2, -+ JBT_REG_SLEEP_IN_LCCNT_D = 0xc3, -+ JBT_REG_SLEEP_IN_LCCNT_E = 0xc4, -+ JBT_REG_SLEEP_IN_LCCNT_F = 0xc5, -+ JBT_REG_SLEEP_IN_LCCNT_G = 0xc6, -+ -+ JBT_REG_GAMMA1_FINE_1 = 0xc7, -+ JBT_REG_GAMMA1_FINE_2 = 0xc8, -+ JBT_REG_GAMMA1_INCLINATION = 0xc9, -+ JBT_REG_GAMMA1_BLUE_OFFSET = 0xca, -+ -+ JBT_REG_BLANK_CONTROL = 0xcf, -+ JBT_REG_BLANK_TH_TV = 0xd0, -+ JBT_REG_CKV_ON_OFF = 0xd1, -+ JBT_REG_CKV_1_2 = 0xd2, -+ JBT_REG_OEV_TIMING = 0xd3, -+ JBT_REG_ASW_TIMING_1 = 0xd4, -+ JBT_REG_ASW_TIMING_2 = 0xd5, -+ -+ JBT_REG_HCLOCK_VGA = 0xec, -+ JBT_REG_HCLOCK_QVGA = 0xed, -+ -+}; -+ -+static const char *jbt_state_names[] = { -+ [JBT_STATE_DEEP_STANDBY] = "deep-standby", -+ [JBT_STATE_SLEEP] = "sleep", -+ [JBT_STATE_NORMAL] = "normal", -+}; -+ -+#define GTA01_SCLK (1 << 7) /* GPG7 */ -+#define GTA01_MOSI (1 << 6) /* GPG6 */ -+#define GTA01_MISO (1 << 5) /* GPG5 */ -+#define GTA01_CS (1 << 3) /* GPG3 */ -+ -+#define SPI_READ ((immr->GPGDAT & GTA01_MISO) != 0) -+ -+#define SPI_CS(bit) if (bit) gpio->GPGDAT |= GTA01_CS; \ -+ else gpio->GPGDAT &= ~GTA01_CS -+ -+#define SPI_SDA(bit) if (bit) gpio->GPGDAT |= GTA01_MOSI; \ -+ else gpio->GPGDAT &= ~GTA01_MOSI -+ -+#define SPI_SCL(bit) if (bit) gpio->GPGDAT |= GTA01_SCLK; \ -+ else gpio->GPGDAT &= ~GTA01_SCLK -+ -+/* 150uS minimum clock cycle, we have two of this plus our other -+ * instructions */ -+#define SPI_DELAY udelay(100) /* 200uS */ -+ -+ -+#define JBT_TX_BUF_SIZE -+struct jbt_info { -+ enum jbt_state state; -+ u_int16_t tx_buf[4]; -+ struct spi_device *spi_dev; -+}; -+ -+static struct jbt_info _jbt, *jbt = &_jbt; -+ -+static int jbt_spi_xfer(int wordnum, int bitlen, u_int16_t *dout) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ u_int16_t tmpdout = 0; -+ int i, j; -+ -+ DEBUGP("spi_xfer: dout %08X wordnum %u bitlen %d\n", -+ *(uint *)dout, wordnum, bitlen); -+ -+ SPI_CS(0); -+ -+ for (i = 0; i < wordnum; i ++) { -+ tmpdout = dout[i]; -+ -+ for (j = 0; j < bitlen; j++) { -+ SPI_SCL(0); -+ if (tmpdout & (1 << bitlen-1)) { -+ SPI_SDA(1); -+ DEBUGPC("1"); -+ } else { -+ SPI_SDA(0); -+ DEBUGPC("0"); -+ } -+ SPI_DELAY; -+ SPI_SCL(1); -+ SPI_DELAY; -+ tmpdout <<= 1; -+ } -+ DEBUGPC(" "); -+ } -+ DEBUGPC("\n"); -+ -+ SPI_CS(1); -+ -+ return 0; -+} -+ -+#define JBT_COMMAND 0x000 -+#define JBT_DATA 0x100 -+ -+static int jbt_reg_write_nodata(struct jbt_info *jbt, u_int8_t reg) -+{ -+ int rc; -+ -+ jbt->tx_buf[0] = JBT_COMMAND | reg; -+ -+ rc = jbt_spi_xfer(1, 9, jbt->tx_buf); -+ -+ return rc; -+} -+ -+ -+static int jbt_reg_write(struct jbt_info *jbt, u_int8_t reg, u_int8_t data) -+{ -+ int rc; -+ -+ jbt->tx_buf[0] = JBT_COMMAND | reg; -+ jbt->tx_buf[1] = JBT_DATA | data; -+ -+ rc = jbt_spi_xfer(2, 9, jbt->tx_buf); -+ -+ return rc; -+} -+ -+static int jbt_reg_write16(struct jbt_info *jbt, u_int8_t reg, u_int16_t data) -+{ -+ int rc; -+ -+ jbt->tx_buf[0] = JBT_COMMAND | reg; -+ jbt->tx_buf[1] = JBT_DATA | (data >> 8); -+ jbt->tx_buf[2] = JBT_DATA | (data & 0xff); -+ -+ rc = jbt_spi_xfer(3, 9, jbt->tx_buf); -+ -+ return rc; -+} -+ -+static int jbt_init_regs(struct jbt_info *jbt) -+{ -+ int rc; -+ -+ DEBUGP("entering\n"); -+ -+ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01); -+ rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00); -+ rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60); -+ rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10); -+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56); -+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33); -+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11); -+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11); -+ rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02); -+ rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b); -+ rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40); -+ rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03); -+ rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04); -+ rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x02); -+ rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00); -+ -+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11); -+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11); -+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11); -+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040); -+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0); -+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020); -+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0); -+ -+ rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533); -+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00); -+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00); -+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00); -+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00); -+ -+ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0); -+ rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02); -+ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804); -+ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804); -+ -+ rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01); -+ rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000); -+ -+ rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e); -+ rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4); -+ rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e); -+ -+#if 0 -+ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff); -+ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff); -+#endif -+ -+ return rc; -+} -+ -+static int standby_to_sleep(struct jbt_info *jbt) -+{ -+ int rc; -+ -+ DEBUGP("entering\n"); -+ -+ /* three times command zero */ -+ rc = jbt_reg_write_nodata(jbt, 0x00); -+ udelay(1000); -+ rc = jbt_reg_write_nodata(jbt, 0x00); -+ udelay(1000); -+ rc = jbt_reg_write_nodata(jbt, 0x00); -+ udelay(1000); -+ -+ /* deep standby out */ -+ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x17); -+ -+ return rc; -+} -+ -+static int sleep_to_normal(struct jbt_info *jbt) -+{ -+ int rc; -+ DEBUGP("entering\n"); -+ -+ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */ -+ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80); -+ -+ /* Quad mode off */ -+ rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00); -+ -+ /* AVDD on, XVDD on */ -+ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16); -+ -+ /* Output control */ -+ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9); -+ -+ /* Sleep mode off */ -+ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT); -+ -+ /* initialize register set */ -+ rc |= jbt_init_regs(jbt); -+ return rc; -+} -+ -+static int normal_to_sleep(struct jbt_info *jbt) -+{ -+ int rc; -+ DEBUGP("entering\n"); -+ -+ rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF); -+ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002); -+ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN); -+ -+ return rc; -+} -+ -+static int sleep_to_standby(struct jbt_info *jbt) -+{ -+ DEBUGP("entering\n"); -+ return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00); -+} -+ -+/* frontend function */ -+int jbt6k74_enter_state(enum jbt_state new_state) -+{ -+ int rc = -EINVAL; -+ -+ DEBUGP("entering(old_state=%u, new_state=%u)\n", jbt->state, new_state); -+ -+ switch (jbt->state) { -+ case JBT_STATE_DEEP_STANDBY: -+ switch (new_state) { -+ case JBT_STATE_DEEP_STANDBY: -+ rc = 0; -+ break; -+ case JBT_STATE_SLEEP: -+ rc = standby_to_sleep(jbt); -+ break; -+ case JBT_STATE_NORMAL: -+ /* first transition into sleep */ -+ rc = standby_to_sleep(jbt); -+ /* then transition into normal */ -+ rc |= sleep_to_normal(jbt); -+ break; -+ } -+ break; -+ case JBT_STATE_SLEEP: -+ switch (new_state) { -+ case JBT_STATE_SLEEP: -+ rc = 0; -+ break; -+ case JBT_STATE_DEEP_STANDBY: -+ rc = sleep_to_standby(jbt); -+ break; -+ case JBT_STATE_NORMAL: -+ rc = sleep_to_normal(jbt); -+ break; -+ } -+ break; -+ case JBT_STATE_NORMAL: -+ switch (new_state) { -+ case JBT_STATE_NORMAL: -+ rc = 0; -+ break; -+ case JBT_STATE_DEEP_STANDBY: -+ /* first transition into sleep */ -+ rc = normal_to_sleep(jbt); -+ /* then transition into deep standby */ -+ rc |= sleep_to_standby(jbt); -+ break; -+ case JBT_STATE_SLEEP: -+ rc = normal_to_sleep(jbt); -+ break; -+ } -+ break; -+ } -+ -+ return rc; -+} -+ -+int jbt6k74_display_onoff(int on) -+{ -+ DEBUGP("entering\n"); -+ if (on) -+ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON); -+ else -+ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF); -+} -+ -+int jbt6k74_init(void) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* initialize SPI for GPIO bitbang */ -+ gpio->GPGCON &= 0xffff033f; -+ gpio->GPGCON |= 0x00005440; -+ -+ /* get LCM out of reset */ -+ gpio->GPCDAT |= (1 << 6); -+ -+ /* according to data sheet: wait 50ms (Tpos of LCM). However, 50ms -+ * seems unreliable with later LCM batches, increasing to 90ms */ -+ udelay(90000); -+ -+ return 0; -+} -+ -+void board_video_init(GraphicDevice *pGD) -+{ -+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); -+ -+ lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */ -+ -+ lcd->LCDCON2 = 0x019fc3c1; -+ lcd->LCDCON3 = 0x0039df67; -+ lcd->LCDCON4 = 0x00000007; -+ lcd->LCDCON5 = 0x0001cf09; -+ lcd->LPCSEL = 0x00000000; -+} -Index: u-boot/board/neo1973/common/jbt6k74.h -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/jbt6k74.h -@@ -0,0 +1,14 @@ -+#ifndef _JBT6K74_H -+#define _JBT6K74_H -+ -+enum jbt_state { -+ JBT_STATE_DEEP_STANDBY, -+ JBT_STATE_SLEEP, -+ JBT_STATE_NORMAL, -+}; -+ -+int jbt6k74_init(void); -+int jbt6k74_display_onoff(int on); -+int jbt6k74_enter_state(enum jbt_state new_state); -+ -+#endif -Index: u-boot/board/neo1973/common/lowlevel_init.S -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/lowlevel_init.S -@@ -0,0 +1,187 @@ -+/* -+ * Memory Setup stuff - taken from blob memsetup.S -+ * -+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and -+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) -+ * -+ * Modified for the FIC Neo1973 GTA01 by Harald Welte <laforge@openmoko.org> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 /* 3clk */ -+#if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+#define B6_SCAN 0x1 /* 9bit */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ -+ defined(CONFIG_ARCH_GTA01B_v4) -+#define B6_SCAN 0x2 /* 10bit */ -+#endif -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x2 /* 10bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x1 /* 3clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ adr r0, SMRDATA -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* setup asynchronous bus mode */ -+ mrc p15, 0, r1 ,c1 ,c0, 0 -+ orr r1, r1, #0xc0000000 -+ mcr p15, 0, r1, c1, c0, 0 -+ -+#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+ /* switch on power for NAND */ -+ ldr r0, =0x56000010 /* GPBCON */ -+ ldr r1, [r0] -+ orr r1, r1, #0x10 -+ str r1, [r0] -+ -+ ldr r0, =0x56000014 /* GPBDAT */ -+ ldr r1, [r0] -+ orr r1, r1, #(1 <<2) -+ str r1, [r0] -+#endif -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0xb2 -+ .word 0x30 -+ .word 0x30 -Index: u-boot/board/neo1973/gta01/Makefile -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta01/Makefile -@@ -0,0 +1,47 @@ -+# -+# (C) Copyright 2000, 2001, 2002 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = lib$(BOARD).a -+ -+OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o -+SOBJS := ../common/lowlevel_init.o -+ -+$(LIB): $(OBJS) $(SOBJS) -+ $(AR) crv $@ $(OBJS) $(SOBJS) -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) -+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -+ -+-include .depend -+ -+######################################################################### -Index: u-boot/board/neo1973/gta01/config.mk -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta01/config.mk -@@ -0,0 +1,34 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+# GTA01v3 has 1 bank of 64 MB SDRAM -+# GTA01v4 has 1 bank of 64 MB SDRAM -+# -+# 3000'0000 to 3400'0000 -+# we load ourself to 33F8'0000 -+# -+# GTA01Bv2 or later has 1 bank of 128 MB SDRAM -+# -+# 3000'0000 to 3800'0000 -+# we load ourself to 37F8'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# download area is 3200'0000 or 3300'0000 -+ -+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -+ -+ifeq ($(GTA01_BIG_RAM),y) -+# FIXME: TEXT_BASE = 0x37F80000 -+TEXT_BASE = 0x33F80000 -+else -+TEXT_BASE = 0x33F80000 -+endif -Index: u-boot/board/neo1973/gta01/gta01.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta01/gta01.c -@@ -0,0 +1,422 @@ -+/* -+ * (C) 2006 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * based on existing S3C2410 startup code in u-boot: -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2410.h> -+#include <i2c.h> -+ -+#include "pcf50606.h" -+ -+#include "../common/neo1973.h" -+#include "../common/jbt6k74.h" -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+/* That many seconds the power key needs to be pressed to power up */ -+#define POWER_KEY_SECONDS 2 -+ -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */ -+//#define M_PDIV 0x3 -+//#define M_SDIV 0x1 -+#define M_MDIV 0x90 /* Fout = 202.8MHz */ -+#define M_PDIV 0x7 -+#define M_SDIV 0x0 -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+/* In case the debug board is attached, we cannot go beyond 200 MHz */ -+#if 0 -+#define M_MDIV 0x7d /* Fout = 266MHz */ -+#define M_PDIV 0x1 -+#define M_SDIV 0x1 -+#else -+#define M_MDIV 0x90 /* Fout = 202.8MHz */ -+#define M_PDIV 0x7 -+#define M_SDIV 0x0 -+#endif -+#elif defined(CONFIG_ARCH_GTA01B_v4) -+/* This board doesn't have bus lines at teh debug port, and we can go to 266 */ -+#define M_MDIV 0x7d /* Fout = 266MHz */ -+#define M_PDIV 0x1 -+#define M_SDIV 0x1 -+#else -+#error Please define GTA01 revision -+#endif -+ -+#define U_M_MDIV 0x78 -+#define U_M_PDIV 0x2 -+#define U_M_SDIV 0x3 -+ -+unsigned int neo1973_wakeup_cause; -+extern int nobootdelay; -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+#if defined(CONFIG_ARCH_GTA01_v3) -+ gpio->GPACON = 0x007FFFFF; -+ -+ gpio->GPBCON = 0x00005055; -+ gpio->GPBUP = 0x000007FF; -+ -+ gpio->GPCCON = 0xAAAA12A8; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x00002AA9; -+ gpio->GPFUP = 0x000000FF; -+ -+ gpio->GPGCON = 0xA846F0C0; -+ gpio->GPGUP = 0x0000AFEF; -+ -+ gpio->GPHCON = 0x0008FAAA; -+ gpio->GPHUP = 0x000007FF; -+#elif defined(CONFIG_ARCH_GTA01_v4) -+ gpio->GPACON = 0x005E47FF; -+ -+ gpio->GPBCON = 0x00045015; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (Flash power-up) */ -+ -+ gpio->GPCCON = 0xAAAA12A9; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xA02AAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x0000aa09; -+ gpio->GPFUP = 0x000000FF; -+ -+ gpio->GPGCON = 0xFF40F0C1; -+ gpio->GPGUP = 0x0000AFEF; -+ -+ gpio->GPHCON = 0x0000FAAA; -+ gpio->GPHUP = 0x000007FF; -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+ gpio->GPACON = 0x005E4FFF; -+ -+ gpio->GPBCON = 0x00145415; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (Flash power-up) */ -+ -+ gpio->GPCCON = 0xAAAA12A9; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xA02AAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x0000aa19; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */ -+ -+ gpio->GPGCON = 0xFF40F0C1; -+ gpio->GPGUP = 0x0000AFEF; -+ -+ gpio->GPHCON = 0x0000FAAA; -+ gpio->GPHUP = 0x000007FF; -+#elif defined(CONFIG_ARCH_GTA01B_v4) -+ gpio->GPACON = 0x0005E0FFF; -+ gpio->GPADAT |= (1 << 16); /* Set GPA16 to high (nNAND_WP) */ -+ -+ gpio->GPBCON = 0x00045455; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (SD power down) */ -+ -+ gpio->GPCCON = 0xAAAA12A9; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x0000aa99; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */ -+ -+ gpio->GPGCON = 0xFF14F0F8; -+ gpio->GPGUP = 0x0000AFEF; -+ -+ gpio->GPHCON = 0x0000FAAA; -+ gpio->GPHUP = 0x000007FF; -+#else -+#error Please define GTA01 version -+#endif -+ -+ /* arch number of SMDK2410-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA01; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int board_late_init(void) -+{ -+ unsigned char tmp; -+ char buf[32]; -+ -+ /* Initialize the Power Management Unit with a safe register set */ -+ pcf50606_init(); -+ -+ /* obtain wake-up reason, save INT1 in environment */ -+ tmp = pcf50606_reg_read(PCF50606_REG_INT1); -+ sprintf(buf, "0x%02x", tmp); -+ setenv("pcf50606_int1", buf); -+ -+ if (tmp & PCF50606_INT1_ALARM) { -+ /* we've been woken up by RTC alarm or charger insert, boot */ -+ neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM; -+ goto continue_boot; -+ } -+ if (tmp & PCF50606_INT1_EXTONR) { -+ neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER; -+ } -+ -+ if (tmp & PCF50606_INT1_ONKEYF) { -+ int seconds = 0; -+ neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; -+ /* we've been woken up by a falling edge of the onkey */ -+ -+ /* we can't just setenv(bootdelay,-1) because that would -+ * accidentially become permanent if the user does saveenv */ -+ if (neo1973_911_key_pressed()) -+ nobootdelay = 1; -+ -+ while (1) { -+ u_int8_t int1, oocs; -+ -+ oocs = pcf50606_reg_read(PCF50606_REG_OOCS); -+ if (oocs & PFC50606_OOCS_ONKEY) -+ break; -+ -+ int1 = pcf50606_reg_read(PCF50606_REG_INT1); -+ if (int1 & PCF50606_INT1_SECOND) -+ seconds++; -+ -+ if (seconds >= POWER_KEY_SECONDS) -+ goto continue_boot; -+ } -+ /* Power off if minimum number of seconds not reached */ -+ neo1973_poweroff(); -+ } -+ -+ /* if there's no other reason, must be regular reset */ -+ neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; -+ -+continue_boot: -+ jbt6k74_init(); -+ jbt6k74_enter_state(JBT_STATE_NORMAL); -+ jbt6k74_display_onoff(1); -+ -+ /* issue a short pulse with the vibrator */ -+ neo1973_vibrator(1); -+ udelay(50000); -+ neo1973_vibrator(0); -+ -+ /* switch on the backlight */ -+ neo1973_backlight(1); -+ -+#if defined(CONFIG_ARCH_GTA01B_v4) -+ { -+ /* check if sd card is inserted, and power-up if it is */ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ if (!(gpio->GPFDAT & (1 << 5))) -+ gpio->GPBDAT &= ~(1 << 2); -+ } -+#endif -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -+ -+u_int32_t get_board_rev(void) -+{ -+#if defined(CONFIG_ARCH_GTA01_v3) -+ return 0x00000130; -+#elif defined(CONFIG_ARCH_GTA01_v4) -+ return 0x00000140; -+#elif defined(CONFIG_ARCH_GTA01B_v2) -+ return 0x00000220; -+#elif defined(CONFIG_ARCH_GTA01B_v3) -+ return 0x00000230; -+#elif defined(CONFIG_ARCH_GTA01B_v4) -+ return 0x00000240; -+#endif -+} -+ -+void neo1973_poweroff(void) -+{ -+ serial_printf("poweroff\n"); -+ udc_disconnect(); -+ pcf50606_reg_write(PCF50606_REG_OOCC1, PCF50606_OOCC1_GOSTDBY); -+ /* don't return to caller */ -+ while (1) ; -+} -+ -+void neo1973_backlight(int on) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ if (on) -+ gpio->GPBDAT |= 0x01; -+ else -+ gpio->GPBDAT &= ~0x01; -+} -+ -+void neo1973_vibrator(int on) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ if (on) -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+ gpio->GPGDAT |= (1 << 11); /* GPG11 */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+ gpio->GPBDAT |= (1 << 10); /* GPB10 */ -+#elif defined(CONFIG_ARCH_GTA01B_v4) -+ gpio->GPBDAT |= (1 << 3); /* GPB3 */ -+#endif -+ else -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+ gpio->GPGDAT &= ~(1 << 11); /* GPG11 */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+ gpio->GPBDAT &= ~(1 << 10); /* GPB10 */ -+#elif defined(CONFIG_ARCH_GTA01B_v4) -+ gpio->GPBDAT &= ~(1 << 3); /* GPB3 */ -+#endif -+} -+ -+int neo1973_911_key_pressed(void) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ if (gpio->GPFDAT & (1 << 6)) -+ return 0; -+ return 1; -+} -+ -+static const char *chgstate_names[] = { -+ [PCF50606_MBCC1_CHGMOD_QUAL] = "qualification", -+ [PCF50606_MBCC1_CHGMOD_PRE] = "pre", -+ [PCF50606_MBCC1_CHGMOD_TRICKLE] = "trickle", -+ [PCF50606_MBCC1_CHGMOD_FAST_CCCV] = "fast_cccv", -+ [PCF50606_MBCC1_CHGMOD_FAST_NOCC] = "fast_nocc", -+ [PCF50606_MBCC1_CHGMOD_FAST_NOCV] = "fast_nocv", -+ [PCF50606_MBCC1_CHGMOD_FAST_SW] = "fast_switch", -+ [PCF50606_MBCC1_CHGMOD_IDLE] = "idle", -+}; -+ -+const char *neo1973_get_charge_status(void) -+{ -+ u_int8_t mbcc1 = pcf50606_reg_read(PCF50606_REG_MBCC1); -+ u_int8_t chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK); -+ return chgstate_names[chgmod]; -+} -+ -+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd) -+{ -+ switch (cmd) { -+ case NEO1973_CHGCMD_NONE: -+ break; -+ case NEO1973_CHGCMD_AUTOFAST: -+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, -+ PCF50606_MBCC1_AUTOFST, -+ PCF50606_MBCC1_AUTOFST); -+ break; -+ case NEO1973_CHGCMD_NO_AUTOFAST: -+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, -+ PCF50606_MBCC1_AUTOFST, 0); -+ break; -+ case NEO1973_CHGCMD_OFF: -+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, -+ PCF50606_MBCC1_CHGMOD_MASK, -+ PCF50606_MBCC1_CHGMOD_IDLE); -+ break; -+ -+ case NEO1973_CHGCMD_FAST: -+ case NEO1973_CHGCMD_FASTER: -+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, -+ PCF50606_MBCC1_CHGMOD_MASK, -+ PCF50606_MBCC1_CHGMOD_FAST_CCCV); -+ break; -+ } -+ return 0; -+} -+ -Index: u-boot/board/neo1973/gta01/pcf50606.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta01/pcf50606.c -@@ -0,0 +1,100 @@ -+ -+#include <common.h> -+#include <pcf50606.h> -+ -+/* initial register set for PCF50606 in Neo1973 devices */ -+const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = { -+ [PCF50606_REG_OOCS] = 0x00, -+ /* gap */ -+ [PCF50606_REG_INT1M] = PCF50606_INT1_SECOND, -+ [PCF50606_REG_INT2M] = 0x00, -+ [PCF50606_REG_INT3M] = PCF50606_INT3_TSCPRES, -+ [PCF50606_REG_OOCC1] = PCF50606_OOCC1_RTCWAK | -+ PCF50606_OOCC1_CHGWAK | -+ PCF50606_OOCC1_EXTONWAK_HIGH, -+ [PCF50606_REG_OOCC2] = PCF50606_OOCC2_ONKEYDB_14ms | -+ PCF50606_OOCC2_EXTONDB_14ms, -+ /* gap */ -+ [PCF50606_REG_PSSC] = 0x00, -+ [PCF50606_REG_PWROKM] = 0x00, -+ /* gap */ -+#if defined(CONFIG_ARCH_GTA01B_v2) -+ [PCF50606_REG_DCDC1] = 0x1e, /* GL_3V3: off */ -+#elif defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4) -+ [PCF50606_REG_DCDC1] = 0x18, /* GL_1V5: off */ -+#endif -+ [PCF50606_REG_DCDC2] = 0x00, -+ [PCF50606_REG_DCDC3] = 0x00, -+ [PCF50606_REG_DCDC4] = 0x30, /* 1.25A */ -+ -+ [PCF50606_REG_DCDEC1] = 0xe8, /* IO_3V3: on */ -+ [PCF50606_REG_DCDEC2] = 0x00, -+ -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+ [PCF50606_REG_DCUDC1] = 0xe3, /* CORE_1V8: 1.8V */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+ [PCF50606_REG_DCUDC1] = 0xe4, /* CORE_1V8: 2.1V */ -+#elif defined(CONFIG_ARCH_GTA01B_v4) -+ [PCF50606_REG_DCUDC1] = 0xc4, /* CORE_1V8: 2.1V if PWREN2 = HIGH */ -+#endif -+ [PCF50606_REG_DCUDC2] = 0x30, /* 1.25A current limit */ -+ -+#if defined(CONFIG_ARCH_GTA01_v3) -+ [PCF50606_REG_IOREGC] = 0x13, /* VTCXO_2V8: off */ -+#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \ -+ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4) -+ //see internal bug 94 [PCF50606_REG_IOREGC] = 0x18, /* CODEC_3V3: off */ -+ [PCF50606_REG_IOREGC] = 0xf8, /* CODEC_3V3: on */ -+#endif -+ -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+ [PCF50606_REG_D1REGC1] = 0x15, /* VRF_3V: off */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ -+ defined(CONFIG_ARCH_GTA01B_v4) -+ [PCF50606_REG_D1REGC1] = 0x16, /* BT_3V15: off */ -+#endif -+ -+#if defined(CONFIG_ARCH_GTA01_v3) -+ [PCF50606_REG_D2REGC1] = 0xf8, /* SD_3V3: on */ -+#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \ -+ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4) -+ [PCF50606_REG_D2REGC1] = 0x10, /* GL_2V5: off */ -+#endif -+ -+#if defined(CONFIG_ARCH_GTA01_v3) -+ [PCF50606_REG_D3REGC1] = 0x18, /* CODEC_3V3: off */ -+#elif defined(CONFIG_ARCH_GTA01_v4) -+ [PCF50606_REG_D3REGC1] = 0x13, /* VTXCO_2V8: off */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+ [PCF50606_REG_D3REGC1] = 0x00, /* USER1: off */ -+#elif defined(CONFIG_ARCH_GTA01B_v4) -+ [PCF50606_REG_D3REGC1] = 0xec, /* STBY_1V8: 2.1V */ -+#endif -+ -+ [PCF50606_REG_LPREGC1] = 0xf8, /* LCM_3V3: on */ -+ [PCF50606_REG_LPREGC2] = 0x00, -+ -+ [PCF50606_REG_MBCC1] = 0x01, /* CHGAPE */ -+ [PCF50606_REG_MBCC2] = 0x00, /* unlimited charging */ -+ [PCF50606_REG_MBCC3] = 0x1a, /* 0.2*Ifast, 4.20V */ -+ [PCF50606_REG_BBCC] = 0x1f, /* 400uA */ -+ [PCF50606_REG_ADCC1] = 0x00, -+ [PCF50606_REG_ADCC2] = 0x00, -+ /* gap */ -+#if defined(CONFIG_ARCH_GTA01B_v4) -+ [PCF50606_REG_ACDC1] = 0x86, /* ACD thresh 1.6V, enabled */ -+#else -+ [PCF50606_REG_ACDC1] = 0x00, -+#endif -+ [PCF50606_REG_BVMC] = PCF50606_BVMC_THRSHLD_3V3, -+ [PCF50606_REG_PWMC1] = 0x00, -+ [PCF50606_REG_LEDC1] = 0x00, -+ [PCF50606_REG_LEDC2] = 0x00, -+ [PCF50606_REG_GPOC1] = 0x00, -+ [PCF50606_REG_GPOC2] = 0x00, -+ [PCF50606_REG_GPOC3] = 0x00, -+ [PCF50606_REG_GPOC4] = 0x00, -+ [PCF50606_REG_GPOC5] = 0x00, -+}; -+ -+ -Index: u-boot/board/neo1973/gta01/split_by_variant.sh -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta01/split_by_variant.sh -@@ -0,0 +1,57 @@ -+#!/bin/sh -+# --------------------------------------------------------- -+# Set the core module defines according to Core Module -+# --------------------------------------------------------- -+# --------------------------------------------------------- -+# Set up the GTA01 type define -+# --------------------------------------------------------- -+ -+CFGINC=${obj}include/config.h -+CFGTMP=${obj}board/neo1973/gta01/config.tmp -+ -+mkdir -p ${obj}include -+if [ "$1" == "" ] -+then -+ echo "$0:: No parameters - using GTA01Bv3 config" -+ echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC -+ echo "GTA01_BIG_RAM=y" > $CFGTMP -+else -+ case "$1" in -+ gta01v4_config) -+ echo "#define CONFIG_ARCH_GTA01_v4" > $CFGINC -+ echo "GTA01_BIG_RAM=n" > $CFGTMP -+ ;; -+ -+ gta01v3_config) -+ echo "#define CONFIG_ARCH_GTA01_v3" > $CFGINC -+ echo "GTA01_BIG_RAM=n" > $CFGTMP -+ ;; -+ -+ gta01bv2_config) -+ echo "#define CONFIG_ARCH_GTA01B_v2" > $CFGINC -+ echo "GTA01_BIG_RAM=y" > $CFGTMP -+ ;; -+ -+ gta01bv3_config) -+ echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC -+ echo "GTA01_BIG_RAM=y" > $CFGTMP -+ ;; -+ -+ gta01bv4_config) -+ echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC -+ echo "GTA01_BIG_RAM=y" > $CFGTMP -+ ;; -+ -+ *) -+ echo "$0:: Unrecognised config - using GTA01Bv4 config" -+ echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC -+ echo "GTA01_BIG_RAM=y" > $CFGTMP -+ ;; -+ -+ esac -+ -+fi -+# --------------------------------------------------------- -+# Complete the configuration -+# --------------------------------------------------------- -+$MKCONFIG -a neo1973_gta01 arm arm920t gta01 neo1973 s3c24x0 -Index: u-boot/board/neo1973/gta01/u-boot.lds -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta01/u-boot.lds -@@ -0,0 +1,58 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ cpu/arm920t/s3c24x0/nand_read.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- /dev/null -+++ u-boot/include/configs/neo1973_gta01.h -@@ -0,0 +1,265 @@ -+/* -+ * (C) Copyright 2006 OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * Configuation settings for the FIC Neo1973 GTA01 Linux GSM phone -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#if defined(BUILD_FOR_RAM) -+/* If we want to start u-boot from inside RAM */ -+#define CONFIG_SKIP_RELOCATE_UBOOT 1 -+#define CONFIG_SKIP_LOWLEVEL_INIT 1 -+#else -+/* we want to start u-boot directly from within NAND flash */ -+#define CONFIG_S3C2410_NAND_BOOT 1 -+#define CONFIG_S3C2410_NAND_SKIP_BAD 1 -+#endif -+ -+#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */ -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS (\ -+ CFG_CMD_BDI | \ -+ CFG_CMD_LOADS | \ -+ CFG_CMD_LAODB | \ -+ CFG_CMD_IMI | \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_MEMORY | \ -+ CFG_CMD_ENV | \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_BOOTD | \ -+ CFG_CMD_CONSOLE | \ -+ CFG_CMD_ASKENV | \ -+ CFG_CMD_RUN | \ -+ CFG_CMD_ECHO | \ -+ CFG_CMD_I2C | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_IMMAP | \ -+ CFG_CMD_DATE | \ -+ CFG_CMD_AUTOSCRIPT | \ -+ CFG_CMD_BSP | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_MISC | \ -+ /* CFG_CMD_USB | */ \ -+ /* CFG_CMD_JFFS2 | */ \ -+ CFG_CMD_DIAG | \ -+ /* CFG_CMD_HWFLOW | */ \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_FAT | \ -+ CFG_CMD_EXT2 | \ -+ 0) -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" -+#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x34000 0x200000; bootm 0x32000000" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#if defined(CONFIG_ARCH_GTA01_v3) -+#define CFG_PROMPT "GTA01v3 # " /* Monitor Command Prompt */ -+#elif defined(CONFIG_ARCH_GTA01_v4) -+#define CFG_PROMPT "GTA01v4 # " /* Monitor Command Prompt */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) -+#define CFG_PROMPT "GTA01Bv2 # " /* Monitor Command Prompt */ -+#elif defined(CONFIG_ARCH_GTA01B_v3) -+#define CFG_PROMPT "GTA01Bv3 # " /* Monitor Command Prompt */ -+#elif defined(CONFIG_ARCH_GTA01B_v4) -+#define CFG_PROMPT "GTA01Bv4 # " /* Monitor Command Prompt */ -+#endif -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 16 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x33000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+#if 0 -+#define CONFIG_USB_OHCI 1 -+#endif -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ -+ defined(CONFIG_ARCH_GTA01B_v4) -+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -+#else -+#error Please define GTA01 variant -+#endif -+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+/* No NOR flash in this device */ -+#define CFG_NO_FLASH 1 -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+/* EXT2 driver */ -+#define CONFIG_EXT2 1 -+ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT -+ -+#if 0 -+/* JFFS2 driver */ -+#define CONFIG_JFFS2_CMDLINE 1 -+#define CONFIG_JFFS2_NAND 1 -+#define CONFIG_JFFS2_NAND_DEV 0 -+#define CONFIG_JFFS2_NAND_OFF 0x634000 -+#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+#endif -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#endif -+ -+#define CONFIG_DRIVER_S3C24X0_I2C 1 -+#define CONFIG_HARD_I2C 1 -+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */ -+#define CFG_I2C_SLAVE 0x7f -+ -+/* we have a board_late_init() function */ -+#define BOARD_LATE_INIT 1 -+ -+#if 1 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#define CONFIG_S3C2410_NAND_BBT 1 -+#define CONFIG_S3C2410_NAND_HWECC 1 -+ -+#define CONFIG_DRIVER_PCF50606 1 -+ -+#endif /* __CONFIG_H */ -Index: u-boot/board/neo1973/common/neo1973.h -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/neo1973.h -@@ -0,0 +1,32 @@ -+#ifndef _NEO1973_H -+#define _NEO1973_H -+ -+enum wakeup_reason { -+ NEO1973_WAKEUP_NONE, -+ NEO1973_WAKEUP_RESET, -+ NEO1973_WAKEUP_POWER_KEY, -+ NEO1973_WAKEUP_CHARGER, -+ NEO1973_WAKEUP_ALARM, -+}; -+ -+enum neo1973_charger_cmd { -+ NEO1973_CHGCMD_NONE, -+ NEO1973_CHGCMD_AUTOFAST, -+ NEO1973_CHGCMD_NO_AUTOFAST, -+ NEO1973_CHGCMD_OFF, -+ NEO1973_CHGCMD_FAST, -+ NEO1973_CHGCMD_FASTER, -+}; -+ -+extern unsigned int neo1973_wakeup_cause; -+ -+void neo1973_poweroff(void); -+void neo1973_backlight(int on); -+void neo1973_vibrator(int on); -+ -+int neo1973_911_key_pressed(void); -+ -+const char *neo1973_get_charge_status(void); -+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd); -+ -+#endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-qt2410.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-qt2410.patch deleted file mode 100644 index 343598902f..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-qt2410.patch +++ /dev/null @@ -1,1233 +0,0 @@ -This patch adds 'board' support for the Armzone QT2410 -development board to u-boot. - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/Makefile -=================================================================== ---- u-boot.orig/Makefile -+++ u-boot/Makefile -@@ -2009,6 +2009,9 @@ - sbc2410x_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 - -+qt2410_config : unconfig -+ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 -+ - scb9328_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx - -Index: u-boot/board/qt2410/Makefile -=================================================================== ---- /dev/null -+++ u-boot/board/qt2410/Makefile -@@ -0,0 +1,47 @@ -+# -+# (C) Copyright 2000, 2001, 2002 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = lib$(BOARD).a -+ -+OBJS := qt2410.o flash.o -+SOBJS := lowlevel_init.o -+ -+$(LIB): $(OBJS) $(SOBJS) -+ $(AR) crv $@ $(OBJS) $(SOBJS) -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) -+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -+ -+-include .depend -+ -+######################################################################### -Index: u-boot/board/qt2410/config.mk -=================================================================== ---- /dev/null -+++ u-boot/board/qt2410/config.mk -@@ -0,0 +1,29 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+CONFIG_USB_DFU_VENDOR=0x1457 -+CONFIG_USB_DFU_PRODUCT=0x511d -+CONFIG_USB_DFU_REVISION=0x0100 -+ -+# -+# SMDK2410 has 1 bank of 64 MB DRAM -+# -+# 3000'0000 to 3400'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# we load ourself to 33F8'0000 -+# -+# download area is 3300'0000 -+# -+ -+ -+TEXT_BASE = 0x33F80000 -Index: u-boot/board/qt2410/flash.c -=================================================================== ---- /dev/null -+++ u-boot/board/qt2410/flash.c -@@ -0,0 +1,435 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Alex Zuepke <azu@sysgo.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+ulong myflush (void); -+ -+ -+#define FLASH_BANK_SIZE PHYS_FLASH_SIZE -+#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ -+ -+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -+ -+ -+#define CMD_READ_ARRAY 0x000000F0 -+#define CMD_UNLOCK1 0x000000AA -+#define CMD_UNLOCK2 0x00000055 -+#define CMD_ERASE_SETUP 0x00000080 -+#define CMD_ERASE_CONFIRM 0x00000030 -+#define CMD_PROGRAM 0x000000A0 -+#define CMD_UNLOCK_BYPASS 0x00000020 -+ -+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) -+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) -+ -+#define BIT_ERASE_DONE 0x00000080 -+#define BIT_RDY_MASK 0x00000080 -+#define BIT_PROGRAM_ERROR 0x00000020 -+#define BIT_TIMEOUT 0x80000000 /* our flag */ -+ -+#define READY 1 -+#define ERR 2 -+#define TMO 4 -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+ulong flash_init (void) -+{ -+ int i, j; -+ ulong size = 0; -+ -+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { -+ ulong flashbase = 0; -+ -+ flash_info[i].flash_id = -+#if defined(CONFIG_AMD_LV400) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV400B & FLASH_TYPEMASK); -+#elif defined(CONFIG_AMD_LV800) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV800B & FLASH_TYPEMASK); -+#else -+#error "Unknown flash configured" -+#endif -+ flash_info[i].size = FLASH_BANK_SIZE; -+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; -+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); -+ if (i == 0) -+ flashbase = PHYS_FLASH_1; -+ else -+ panic ("configured too many flash banks!\n"); -+ for (j = 0; j < flash_info[i].sector_count; j++) { -+ if (j <= 3) { -+ /* 1st one is 16 KB */ -+ if (j == 0) { -+ flash_info[i].start[j] = -+ flashbase + 0; -+ } -+ -+ /* 2nd and 3rd are both 8 KB */ -+ if ((j == 1) || (j == 2)) { -+ flash_info[i].start[j] = -+ flashbase + 0x4000 + (j - -+ 1) * -+ 0x2000; -+ } -+ -+ /* 4th 32 KB */ -+ if (j == 3) { -+ flash_info[i].start[j] = -+ flashbase + 0x8000; -+ } -+ } else { -+ flash_info[i].start[j] = -+ flashbase + (j - 3) * MAIN_SECT_SIZE; -+ } -+ } -+ size += flash_info[i].size; -+ } -+ -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_FLASH_BASE, -+ CFG_FLASH_BASE + monitor_flash_len - 1, -+ &flash_info[0]); -+ -+#if 0 -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_ENV_ADDR, -+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); -+#endif -+ -+ return size; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+void flash_print_info (flash_info_t * info) -+{ -+ int i; -+ -+ switch (info->flash_id & FLASH_VENDMASK) { -+ case (AMD_MANUFACT & FLASH_VENDMASK): -+ printf ("AMD: "); -+ break; -+ default: -+ printf ("Unknown Vendor "); -+ break; -+ } -+ -+ switch (info->flash_id & FLASH_TYPEMASK) { -+ case (AMD_ID_LV400B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV400BB (4Mbit)\n"); -+ break; -+ case (AMD_ID_LV800B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV800BB (8Mbit)\n"); -+ break; -+ default: -+ printf ("Unknown Chip Type\n"); -+ goto Done; -+ break; -+ } -+ -+ printf (" Size: %ld MB in %d Sectors\n", -+ info->size >> 20, info->sector_count); -+ -+ printf (" Sector Start Addresses:"); -+ for (i = 0; i < info->sector_count; i++) { -+ if ((i % 5) == 0) { -+ printf ("\n "); -+ } -+ printf (" %08lX%s", info->start[i], -+ info->protect[i] ? " (RO)" : " "); -+ } -+ printf ("\n"); -+ -+ Done:; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+int flash_erase (flash_info_t * info, int s_first, int s_last) -+{ -+ ushort result; -+ int iflag, cflag, prot, sect; -+ int rc = ERR_OK; -+ int chip; -+ -+ /* first look for protection bits */ -+ -+ if (info->flash_id == FLASH_UNKNOWN) -+ return ERR_UNKNOWN_FLASH_TYPE; -+ -+ if ((s_first < 0) || (s_first > s_last)) { -+ return ERR_INVAL; -+ } -+ -+ if ((info->flash_id & FLASH_VENDMASK) != -+ (AMD_MANUFACT & FLASH_VENDMASK)) { -+ return ERR_UNKNOWN_FLASH_VENDOR; -+ } -+ -+ prot = 0; -+ for (sect = s_first; sect <= s_last; ++sect) { -+ if (info->protect[sect]) { -+ prot++; -+ } -+ } -+ if (prot) -+ return ERR_PROTECTED; -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ /* Start erase on unprotected sectors */ -+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { -+ printf ("Erasing sector %2d ... ", sect); -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ if (info->protect[sect] == 0) { /* not protected */ -+ vu_short *addr = (vu_short *) (info->start[sect]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ *addr = CMD_ERASE_CONFIRM; -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > -+ CFG_FLASH_ERASE_TOUT) { -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ chip = TMO; -+ break; -+ } -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_ERASE_DONE) -+ chip = READY; -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) -+ chip = ERR; -+ -+ } while (!chip); -+ -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ -+ if (chip == ERR) { -+ rc = ERR_PROG_ERROR; -+ goto outahere; -+ } -+ if (chip == TMO) { -+ rc = ERR_TIMOUT; -+ goto outahere; -+ } -+ -+ printf ("ok.\n"); -+ } else { /* it was protected */ -+ -+ printf ("protected!\n"); -+ } -+ } -+ -+ if (ctrlc ()) -+ printf ("User Interrupt!\n"); -+ -+ outahere: -+ /* allow flash to settle - wait 10 ms */ -+ udelay_masked (10000); -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash -+ */ -+ -+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) -+{ -+ vu_short *addr = (vu_short *) dest; -+ ushort result; -+ int rc = ERR_OK; -+ int cflag, iflag; -+ int chip; -+ -+ /* -+ * Check if Flash is (sufficiently) erased -+ */ -+ result = *addr; -+ if ((result & data) != data) -+ return ERR_NOT_ERASED; -+ -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; -+ *addr = CMD_PROGRAM; -+ *addr = data; -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { -+ chip = ERR | TMO; -+ break; -+ } -+ if (!chip && ((result & 0x80) == (data & 0x80))) -+ chip = READY; -+ -+ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { -+ result = *addr; -+ -+ if ((result & 0x80) == (data & 0x80)) -+ chip = READY; -+ else -+ chip = ERR; -+ } -+ -+ } while (!chip); -+ -+ *addr = CMD_READ_ARRAY; -+ -+ if (chip == ERR || *addr != data) -+ rc = ERR_PROG_ERROR; -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash. -+ */ -+ -+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -+{ -+ ulong cp, wp; -+ int l; -+ int i, rc; -+ ushort data; -+ -+ wp = (addr & ~1); /* get lower word aligned address */ -+ -+ /* -+ * handle unaligned start bytes -+ */ -+ if ((l = addr - wp) != 0) { -+ data = 0; -+ for (i = 0, cp = wp; i < l; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ for (; i < 2 && cnt > 0; ++i) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ ++cp; -+ } -+ for (; cnt == 0 && i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ wp += 2; -+ } -+ -+ /* -+ * handle word aligned part -+ */ -+ while (cnt >= 2) { -+ data = *((vu_short *) src); -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 2; -+ wp += 2; -+ cnt -= 2; -+ } -+ -+ if (cnt == 0) { -+ return ERR_OK; -+ } -+ -+ /* -+ * handle unaligned tail bytes -+ */ -+ data = 0; -+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ } -+ for (; i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ return write_hword (info, wp, data); -+} -Index: u-boot/board/qt2410/lowlevel_init.S -=================================================================== ---- /dev/null -+++ u-boot/board/qt2410/lowlevel_init.S -@@ -0,0 +1,171 @@ -+/* -+ * Memory Setup stuff - taken from blob memsetup.S -+ * -+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and -+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) -+ * -+ * Modified for the Samsung SMDK2410 by -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 -+#define B6_SCAN 0x1 /* 9bit */ -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x1 /* 9bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x1 /* 3clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ adr r0, SMRDATA -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* setup asynchronous bus mode */ -+ mrc p15, 0, r1 ,c1 ,c0, 0 -+ orr r1, r1, #0xc0000000 -+ mcr p15, 0, r1, c1, c0, 0 -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0xb2 -+ .word 0x30 -+ .word 0x30 -Index: u-boot/board/qt2410/qt2410.c -=================================================================== ---- /dev/null -+++ u-boot/board/qt2410/qt2410.c -@@ -0,0 +1,152 @@ -+/* -+ * (C) 2006 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * based on existing S3C2410 startup code in u-boot: -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <video_fb.h> -+#include <usbdcore.h> -+#include <s3c2410.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#if 1 -+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */ -+//#define M_PDIV 0x3 -+//#define M_SDIV 0x1 -+#define M_MDIV 0x90 /* Fout = 202.8MHz */ -+#define M_PDIV 0x7 -+#define M_SDIV 0x0 -+#else -+#define M_MDIV 0x5c /* Fout = 150.0MHz */ -+#define M_PDIV 0x4 -+#define M_SDIV 0x0 -+#endif -+ -+#if 1 -+#define U_M_MDIV 0x78 -+#define U_M_PDIV 0x2 -+#define U_M_SDIV 0x3 -+#else -+#define U_M_MDIV 0x48 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x007FFFFF; -+ gpio->GPBCON = 0x00044555; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPCCON = 0xAAAAAAAA; -+ gpio->GPCUP = 0x0000FFFF; -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ gpio->GPFCON = 0x000055AA; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPGCON = 0xFF95FFBA; -+ //gpio->GPGUP = 0x0000FFFF; -+ gpio->GPGUP = 0x0000AFEF; -+ gpio->GPHCON = 0x0028FAAA; -+ gpio->GPHUP = 0x000007FF; -+ -+ /* arch number of SMDK2410-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_QT2410; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+#if defined(CONFIG_USB_DEVICE) -+void udc_ctrl(enum usbd_event event, int param) -+{ -+} -+#endif -+ -+void board_video_init(GraphicDevice *pGD) -+{ -+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); -+ -+ /* FIXME: select LCM type by env variable */ -+ -+ /* Configuration for GTA01 LCM on QT2410 */ -+ lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */ -+ -+ lcd->LCDCON2 = 0x019fc3c1; -+ lcd->LCDCON3 = 0x0039df67; -+ lcd->LCDCON4 = 0x00000007; -+ lcd->LCDCON5 = 0x0001cf09; -+ lcd->LPCSEL = 0x00000000; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -Index: u-boot/board/qt2410/u-boot.lds -=================================================================== ---- /dev/null -+++ u-boot/board/qt2410/u-boot.lds -@@ -0,0 +1,58 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ cpu/arm920t/s3c24x0/nand_read.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/include/configs/qt2410.h -=================================================================== ---- /dev/null -+++ u-boot/include/configs/qt2410.h -@@ -0,0 +1,287 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * Gary Jennejohn <gj@denx.de> -+ * David Mueller <d.mueller@elsoft.ch> -+ * -+ * Configuation settings for the Armzone QT2410 board. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#if 0 -+/* If we want to start u-boot from usb bootloader in NOR flash */ -+#define CONFIG_SKIP_RELOCATE_UBOOT 1 -+#define CONFIG_SKIP_LOWLEVEL_INIT 1 -+#else -+/* If we want to start u-boot directly from within NAND flash */ -+#define CONFIG_S3C2410_NAND_BOOT 1 -+#define CONFIG_S3C2410_NAND_SKIP_BAD 1 -+#endif -+ -+#define CFG_UBOOT_SIZE 0x40000 -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+#if 0 -+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -+#define CS8900_BASE 0x19000300 -+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ -+#endif -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ -+#define CONFIG_HWFLOW 1 -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS (\ -+ CFG_CMD_BDI | \ -+ CFG_CMD_LOADS | \ -+ CFG_CMD_LOADB | \ -+ CFG_CMD_IMI | \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_MEMORY | \ -+ CFG_CMD_ENV | \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_BOOTD | \ -+ CFG_CMD_CONSOLE | \ -+ CFG_CMD_BMP | \ -+ CFG_CMD_ASKENV | \ -+ CFG_CMD_RUN | \ -+ CFG_CMD_ECHO | \ -+ CFG_CMD_I2C | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_IMMAP | \ -+ CFG_CMD_DATE | \ -+ CFG_CMD_AUTOSCRIPT | \ -+ CFG_CMD_BSP | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_MISC | \ -+ /* CFG_CMD_USB | */ \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_DIAG | \ -+ CFG_CMD_HWFLOW | \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_FAT | \ -+ CFG_CMD_EXT2 | \ -+ 0) -+ -+#if 0 -+ CFG_CMD_DHCP | \ -+ CFG_CMD_PING | \ -+ CFG_CMD_NET | \ -+ -+#endif -+ -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" -+#define CONFIG_ETHADDR 01:ab:cd:ef:fe:dc -+#define CONFIG_NETMASK 255.255.255.0 -+#define CONFIG_IPADDR 10.0.0.110 -+#define CONFIG_SERVERIP 10.0.0.1 -+/*#define CONFIG_BOOTFILE "elinos-lart" */ -+#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 64 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x33000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+#define CONFIG_USB_OHCI 1 -+ -+#define CONFIG_USB_DEVICE 1 -+#define CONFIG_USB_TTY 1 -+#define CFG_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ -+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ -+#define CONFIG_USBD_PRODUCTID_CDCACM 0x511d /* CDC ACM */ -+#define CONFIG_USBD_MANUFACTURER "Armzone" -+#define CONFIG_USBD_PRODUCT_NAME "QT2410 Bootloader " U_BOOT_VERSION -+#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" -+#define CONFIG_USBD_DFU 1 -+#define CONFIG_USBD_DFU_XFER_SIZE 0x4000 -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ -+ -+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -+ -+#define CFG_FLASH_BASE PHYS_FLASH_1 -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -+ -+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -+#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -+#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -+ -+/* timeout values are in ticks */ -+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+#define CONFIG_EXT2 1 -+ -+/* FAT driver in u-boot is broken currently */ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT -+ -+#if 1 -+/* JFFS2 driver */ -+#define CONFIG_JFFS2_CMDLINE 1 -+#define CONFIG_JFFS2_NAND 1 -+#define CONFIG_JFFS2_NAND_DEV 0 -+//#define CONFIG_JFFS2_NAND_OFF 0x634000 -+//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+#endif -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+ -+#define CONFIG_DRIVER_S3C24X0_I2C 1 -+#define CONFIG_HARD_I2C 1 -+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */ -+#define CFG_I2C_SLAVE 0x7f -+ -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_SPLASH_SCREEN -+#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ -+#define CONFIG_VIDEO_BMP_GZIP -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+#define CONFIG_UNZIP -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+ -+#define CONFIG_S3C2410_NAND_BBT 1 -+ -+#define MTDIDS_DEFAULT "nand0=qt2410-nand" -+#define MTPARTS_DEFAULT "qt2410-nand:192k(u-boot),8k(u-boot_env),2M(kernel),2M(splash),-(jffs2)" -+ -+#endif /* __CONFIG_H */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920_s3c2410_irq_demux.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920_s3c2410_irq_demux.patch deleted file mode 100644 index b39a268c84..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920_s3c2410_irq_demux.patch +++ /dev/null @@ -1,56 +0,0 @@ -This patch adds a IRQ demultiplexer callback to the arm920 cpu core code, -plus a stub implementation of it for the S3C2410. - -Index: u-boot.git/cpu/arm920t/interrupts.c -=================================================================== ---- u-boot.git.orig/cpu/arm920t/interrupts.c 2007-02-05 22:49:11.000000000 +0100 -+++ u-boot.git/cpu/arm920t/interrupts.c 2007-02-05 23:19:01.000000000 +0100 -@@ -161,11 +161,16 @@ - - void do_irq (struct pt_regs *pt_regs) - { --#if defined (CONFIG_USE_IRQ) && defined (CONFIG_ARCH_INTEGRATOR) -+#if defined (CONFIG_USE_IRQ) -+#if defined (ARM920_IRQ_CALLBACK) -+ ARM920_IRQ_CALLBACK(); -+ return; -+#elif defined (CONFIG_ARCH_INTEGRATOR) - /* ASSUMED to be a timer interrupt */ - /* Just clear it - count handled in */ - /* integratorap.c */ - *(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0; -+#endif /* ARCH_INTEGRATOR */ - #else - printf ("interrupt request\n"); - show_regs (pt_regs); -Index: u-boot.git/cpu/arm920t/s3c24x0/interrupts.c -=================================================================== ---- u-boot.git.orig/cpu/arm920t/s3c24x0/interrupts.c 2007-02-05 22:49:11.000000000 +0100 -+++ u-boot.git/cpu/arm920t/s3c24x0/interrupts.c 2007-02-05 23:21:35.000000000 +0100 -@@ -216,4 +216,13 @@ - /*NOTREACHED*/ - } - -+#ifdef CONFIG_USE_IRQ -+void s3c2410_irq(void) -+{ -+ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); -+ u_int32_t intpnd = irq->INTPND; -+ -+} -+#endif /* USE_IRQ */ -+ - #endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ -Index: u-boot.git/include/common.h -=================================================================== ---- u-boot.git.orig/include/common.h 2007-02-05 22:49:11.000000000 +0100 -+++ u-boot.git/include/common.h 2007-02-05 23:19:01.000000000 +0100 -@@ -452,6 +452,8 @@ - ulong get_PCI_freq (void); - #endif - #if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X) -+void s3c2410_irq(void); -+#define ARM920_IRQ_CALLBACK s3c2410_irq - ulong get_FCLK (void); - ulong get_HCLK (void); - ulong get_PCLK (void); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920t-gd_in_irq.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920t-gd_in_irq.patch deleted file mode 100644 index b3d7bc1166..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920t-gd_in_irq.patch +++ /dev/null @@ -1,28 +0,0 @@ -This patch allows us to use the 'gd' pointer (and thus environment -and everything else associated with it) from interrupt context on -arm920t. - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S 2007-02-24 02:35:38.000000000 +0100 -+++ u-boot/cpu/arm920t/start.S 2007-02-24 02:36:01.000000000 +0100 -@@ -474,12 +474,12 @@ - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 -- add r8, sp, #S_PC -- stmdb r8, {sp, lr}^ @ Calling SP, LR -- str lr, [r8, #0] @ Save calling PC -+ add r7, sp, #S_PC -+ stmdb r7, {sp, lr}^ @ Calling SP, LR -+ str lr, [r7, #0] @ Save calling PC - mrs r6, spsr -- str r6, [r8, #4] @ Save CPSR -- str r0, [r8, #8] @ Save OLD_R0 -+ str r6, [r7, #4] @ Save CPSR -+ str r0, [r7, #8] @ Save OLD_R0 - mov r0, sp - .endm - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-bbt-quiet.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-bbt-quiet.patch deleted file mode 100644 index 9b1febe956..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-bbt-quiet.patch +++ /dev/null @@ -1,43 +0,0 @@ -This patch makes the u-boot NAND BBT code a bit more quiet - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/drivers/nand/nand_bbt.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_bbt.c 2007-02-16 23:54:02.000000000 +0100 -+++ u-boot/drivers/nand/nand_bbt.c 2007-02-16 23:54:05.000000000 +0100 -@@ -157,10 +157,6 @@ - this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06); - continue; - } -- /* Leave it for now, if its matured we can move this -- * message to MTD_DEBUG_LEVEL0 */ -- printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n", -- ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); - /* Factory marked bad or worn out ? */ - if (tmp == 0) - this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06); -@@ -229,14 +225,12 @@ - if (td->options & NAND_BBT_VERSION) { - nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); - td->version[0] = buf[mtd->oobblock + td->veroffs]; -- printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]); - } - - /* Read the mirror version, if available */ - if (md && (md->options & NAND_BBT_VERSION)) { - nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); - md->version[0] = buf[mtd->oobblock + md->veroffs]; -- printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]); - } - - return 1; -@@ -374,8 +368,6 @@ - for (i = 0; i < chips; i++) { - if (td->pages[i] == -1) - printk (KERN_WARNING "Bad block table not found for chip %d\n", i); -- else -- printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]); - } - return 0; - } diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-cmd_s3c2410.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-cmd_s3c2410.patch deleted file mode 100644 index 993ef4f6f2..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-cmd_s3c2410.patch +++ /dev/null @@ -1,175 +0,0 @@ -This patch adds a new 's3c2410' command which currently supports 's3c2410 speed -{set,get,list} and thus allows dynamic change of the CPU clock. - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/cpu/arm920t/s3c24x0/Makefile -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/Makefile 2007-02-24 15:14:00.000000000 +0100 -+++ u-boot/cpu/arm920t/s3c24x0/Makefile 2007-02-24 15:21:02.000000000 +0100 -@@ -26,7 +26,7 @@ - LIB = $(obj)lib$(SOC).a - - COBJS = i2c.o interrupts.o serial.o speed.o \ -- usb_ohci.o nand_read.o nand.o -+ usb_ohci.o nand_read.o nand.o cmd_s3c2410.o - - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) - OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -Index: u-boot/cpu/arm920t/s3c24x0/cmd_s3c2410.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ u-boot/cpu/arm920t/s3c24x0/cmd_s3c2410.c 2007-02-24 15:22:17.000000000 +0100 -@@ -0,0 +1,152 @@ -+/* -+ * (C) Copyright 2006 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * Boot support -+ */ -+#include <common.h> -+#include <command.h> -+#include <net.h> /* for print_IPaddr */ -+#include <s3c2410.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#if (CONFIG_COMMANDS & CFG_CMD_BDI) -+ -+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -+#define MHZ 1000000 -+ -+static void print_cpu_speed(void) -+{ -+ printf("FCLK = %u MHz, HCLK = %u MHz, PCLK = %u MHz\n", -+ get_FCLK()/MHZ, get_HCLK()/MHZ, get_PCLK()/MHZ); -+} -+ -+struct s3c2410_pll_speed { -+ u_int16_t mhz; -+ u_int32_t mpllcon; -+ u_int32_t clkdivn; -+}; -+ -+#define CLKDIVN_1_1_1 0x00 -+#define CLKDIVN_1_2_2 0x02 -+#define CLKDIVN_1_2_4 0x03 -+#define CLKDIVN_1_4_4 0x04 -+ -+static const struct s3c2410_pll_speed pll_configs[] = { -+ { -+ .mhz = 50, -+ .mpllcon = ((0x5c << 12) + (0x4 << 4) + 0x2), -+ .clkdivn = CLKDIVN_1_1_1, -+ }, -+ { -+ .mhz = 101, -+ .mpllcon = ((0x7f << 12) + (0x2 << 4) + 0x2), -+ .clkdivn = CLKDIVN_1_2_2, -+ }, -+ { -+ .mhz = 202, -+ .mpllcon = ((0x90 << 12) + (0x7 << 4) + 0x0), -+ .clkdivn = CLKDIVN_1_2_4, -+ }, -+ { -+ .mhz = 266, -+ .mpllcon = ((0x7d << 12) + (0x1 << 4) + 0x1), -+ .clkdivn = CLKDIVN_1_2_4, -+ }, -+}; -+ -+static void list_cpu_speeds(void) -+{ -+ int i; -+ for (i = 0; i < ARRAY_SIZE(pll_configs); i++) -+ printf("%u MHz\n", pll_configs[i].mhz); -+} -+ -+static int reconfig_mpll(u_int16_t mhz) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(pll_configs); i++) { -+ if (pll_configs[i].mhz == mhz) { -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = pll_configs[i].mpllcon; -+ clk_power->UPLLCON = ((0x78 << 12) + (0x2 << 4) + 0x3), -+ clk_power->CLKDIVN = pll_configs[i].clkdivn; -+ -+ /* If we changed the speed, we need to re-configure -+ * the serial baud rate generator */ -+ serial_setbrg(); -+ return 0; -+ } -+ } -+ return -1; -+} -+ -+int do_s3c2410 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -+{ -+ if (!strcmp(argv[1], "speed")) { -+ if (argc < 2) -+ goto out_help; -+ if (!strcmp(argv[2], "get")) -+ print_cpu_speed(); -+ else if (!strcmp(argv[2], "list")) -+ list_cpu_speeds(); -+ else if (!strcmp(argv[2], "set")) { -+ unsigned long mhz; -+ if (argc < 3) -+ goto out_help; -+ -+ mhz = simple_strtoul(argv[3], NULL, 10); -+ -+ if (reconfig_mpll(mhz) < 0) -+ printf("error, speed %uMHz unknown\n", mhz); -+ else -+ print_cpu_speed(); -+ } else -+ goto out_help; -+ } else { -+out_help: -+ printf("Usage:\n%s\n", cmdtp->usage); -+ return 1; -+ } -+ -+ return 0; -+} -+ -+/* -------------------------------------------------------------------- */ -+ -+ -+U_BOOT_CMD( -+ s3c2410, 4, 1, do_s3c2410, -+ "s3c2410 - SoC specific commands\n", -+ "speed get - display current PLL speed config\n" -+ "s3c2410 speed list - display supporte PLL speed configs\n" -+ "s3c2410 speed set - set PLL speed\n" -+); -+ -+#endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-cramfs_but_no_jffs2.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-cramfs_but_no_jffs2.patch deleted file mode 100644 index 349b83697e..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-cramfs_but_no_jffs2.patch +++ /dev/null @@ -1,41 +0,0 @@ -Fix building with CRAMFS but not JFFS2 support - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/fs/cramfs/cramfs.c -=================================================================== ---- u-boot.orig/fs/cramfs/cramfs.c 2007-02-17 11:46:26.000000000 +0100 -+++ u-boot/fs/cramfs/cramfs.c 2007-02-17 11:54:36.000000000 +0100 -@@ -27,7 +27,7 @@ - #include <common.h> - #include <malloc.h> - --#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) -+#if (CONFIG_COMMANDS & CFG_CMD_CRAMFS) - - #include <asm/byteorder.h> - #include <linux/stat.h> -Index: u-boot/common/cmd_jffs2.c -=================================================================== ---- u-boot.orig/common/cmd_jffs2.c 2007-02-17 11:47:51.000000000 +0100 -+++ u-boot/common/cmd_jffs2.c 2007-02-17 14:08:25.000000000 +0100 -@@ -170,10 +170,19 @@ - static struct mtd_device *current_dev = NULL; - static u8 current_partnum = 0; - -+#ifdef CFG_CMD_CRAMFS - extern int cramfs_check (struct part_info *info); - extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename); - extern int cramfs_ls (struct part_info *info, char *filename); - extern int cramfs_info (struct part_info *info); -+#else -+/* defining empty macros for function names is ugly but avoids ifdef clutter -+ * all over the code */ -+#define cramfs_check(x) (0) -+#define cramfs_load(x,y,z) (-1) -+#define cramfs_ls(x,y) (0) -+#define cramfs_info(x) (0) -+#endif - - static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num); - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-dfu.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-dfu.patch deleted file mode 100644 index 1122f4894f..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-dfu.patch +++ /dev/null @@ -1,2081 +0,0 @@ -Index: u-boot/drivers/usbdcore_ep0.c -=================================================================== ---- u-boot.orig/drivers/usbdcore_ep0.c -+++ u-boot/drivers/usbdcore_ep0.c -@@ -42,10 +42,15 @@ - */ - - #include <common.h> -+DECLARE_GLOBAL_DATA_PTR; - - #if defined(CONFIG_USB_DEVICE) - #include "usbdcore.h" - -+#ifdef CONFIG_USBD_DFU -+#include <usb_dfu.h> -+#endif -+ - #if 0 - #define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args) - #else -@@ -213,7 +218,7 @@ - urb->buffer = device_descriptor; - urb->actual_length = MIN(sizeof(*device_descriptor), max); - } -- /*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */ -+ dbg_ep0(3, "using device configuration, actual_length: %x", urb->actual_length); - break; - - case USB_DESCRIPTOR_TYPE_CONFIGURATION: -@@ -267,7 +272,24 @@ - return -1; - case USB_DESCRIPTOR_TYPE_ENDPOINT: - return -1; -+ /* This really means "Class Specific Descriptor #1 == USB_DT_DFU */ - case USB_DESCRIPTOR_TYPE_HID: -+#ifdef CONFIG_USBD_DFU -+ { -+ int bNumInterface = -+ le16_to_cpu(urb->device_request.wIndex); -+ -+ /* In runtime mode, we only respond to the DFU INTERFACE, -+ * whereas in DFU mode, we respond for all intrfaces */ -+ if (device->dfu_state != DFU_STATE_appIDLE && -+ device->dfu_state != DFU_STATE_appDETACH || -+ bNumInterface == CONFIG_USBD_DFU_INTERFACE) { -+ urb->buffer = &device->dfu_cfg_desc->func_dfu; -+ urb->actual_length = sizeof(struct usb_dfu_func_descriptor); -+ } else -+ return -1; -+ } -+#else /* CONFIG_USBD_DFU */ - { - return -1; /* unsupported at this time */ - #if 0 -@@ -294,6 +316,7 @@ - max); - #endif - } -+#endif /* CONFIG_USBD_DFU */ - break; - case USB_DESCRIPTOR_TYPE_REPORT: - { -@@ -388,6 +411,24 @@ - le16_to_cpu (request->wLength), - USBD_DEVICE_REQUESTS (request->bRequest)); - -+#ifdef CONFIG_USBD_DFU -+ if ((request->bmRequestType & 0x3f) == USB_TYPE_DFU && -+ (device->dfu_state != DFU_STATE_appIDLE || -+ le16_to_cpu(request->wIndex) == CONFIG_USBD_DFU_INTERFACE)) { -+ int rc = dfu_ep0_handler(urb); -+ switch (rc) { -+ case DFU_EP0_NONE: -+ case DFU_EP0_UNHANDLED: -+ break; -+ case DFU_EP0_ZLP: -+ case DFU_EP0_DATA: -+ return 0; -+ case DFU_EP0_STALL: -+ return -1; -+ } -+ } -+#endif /* CONFIG_USB_DFU */ -+ - /* handle USB Standard Request (c.f. USB Spec table 9-2) */ - if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) { - if (device->device_state <= STATE_CONFIGURED) -@@ -570,7 +611,8 @@ - device->interface = le16_to_cpu (request->wIndex); - device->alternate = le16_to_cpu (request->wValue); - /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */ -- serial_printf ("DEVICE_SET_INTERFACE.. event?\n"); -+ usbd_device_event_irq(device, DEVICE_SET_INTERFACE, -+ (request->wIndex << 16 | request->wValue)); - return 0; - - case USB_REQ_GET_STATUS: -Index: u-boot/drivers/usbdfu.c -=================================================================== ---- /dev/null -+++ u-boot/drivers/usbdfu.c -@@ -0,0 +1,1069 @@ -+/* -+ * (C) 2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * based on existing SAM7DFU code from OpenPCD: -+ * (C) Copyright 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ * TODO: -+ * - make NAND support reasonably self-contained and put in apropriate -+ * ifdefs -+ * - add some means of synchronization, i.e. block commandline access -+ * while DFU transfer is in progress, and return to commandline once -+ * we're finished -+ * - add VERIFY support after writing to flash -+ * - sanely free() resources allocated during first uppload/download -+ * request when aborting -+ * - sanely free resources when another alternate interface is selected -+ * -+ * Maybe: -+ * - add something like uImage or some other header that provides CRC -+ * checking? -+ * - make 'dnstate' attached to 'struct usb_device_instance' -+ */ -+ -+#include <config.h> -+#if defined(CONFIG_USBD_DFU) -+ -+#include <common.h> -+DECLARE_GLOBAL_DATA_PTR; -+ -+#include <malloc.h> -+#include <linux/types.h> -+#include <linux/list.h> -+#include <asm/errno.h> -+#include <usbdcore.h> -+#include <usb_dfu.h> -+#include <usb_dfu_descriptors.h> -+#include <usb_dfu_trailer.h> -+ -+#include <nand.h> -+#include <jffs2/load_kernel.h> -+int mtdparts_init(void); -+extern struct list_head devices; -+ -+#include "usbdcore_s3c2410.h" -+#include "usbtty.h" /* for STR_* defs */ -+ -+#define RET_NOTHING 0 -+#define RET_ZLP 1 -+#define RET_STALL 2 -+ -+volatile enum dfu_state *system_dfu_state; /* for 3rd parties */ -+ -+ -+struct dnload_state { -+ nand_info_t *nand; -+ struct part_info *part; -+ unsigned int part_net_size; /* net sizee (excl. bad blocks) of part */ -+ -+ nand_erase_options_t erase_opts; -+ nand_write_options_t write_opts; -+ nand_read_options_t read_opts; -+ -+ unsigned char *ptr; /* pointer to next empty byte in buffer */ -+ unsigned int off; /* offset of current erase page in flash chip */ -+ unsigned char *buf; /* pointer to allocated erase page buffer */ -+ -+ /* unless doing an atomic transfer, we use the static buffer below. -+ * This saves us from having to clean up dynamic allications in the -+ * various error paths of the code. Also, it will always work, no -+ * matter what the memory situation is. */ -+ unsigned char _buf[0x20000]; /* FIXME: depends flash page size */ -+}; -+ -+static struct dnload_state _dnstate; -+ -+static int dfu_trailer_matching(const struct uboot_dfu_trailer *trailer) -+{ -+ if (trailer->magic != UBOOT_DFU_TRAILER_MAGIC || -+ trailer->version != UBOOT_DFU_TRAILER_V1 || -+ trailer->vendor != CONFIG_USBD_VENDORID || -+ (trailer->product != CONFIG_USBD_PRODUCTID_CDCACM && -+ trailer->product != CONFIG_USBD_PRODUCTID_GSERIAL)) -+ return 0; -+#ifdef CONFIG_REVISION_TAG -+ if (trailer->revision != get_board_rev()) -+ return 0; -+#endif -+ -+ return 1; -+} -+ -+static struct part_info *get_partition_nand(int idx) -+{ -+ struct mtd_device *dev; -+ struct part_info *part; -+ struct list_head *pentry; -+ int i; -+ -+ if (mtdparts_init()) -+ return NULL; -+ if (list_empty(&devices)) -+ return NULL; -+ -+ dev = list_entry(devices.next, struct mtd_device, link); -+ i = 0; -+ list_for_each(pentry, &dev->parts) { -+ if (i == idx) { -+ part = list_entry(pentry, struct part_info, link); -+ return part; -+ } -+ i++; -+ } -+ -+ return NULL; -+} -+ -+#define LOAD_ADDR ((unsigned char *)0x32000000) -+ -+static int initialize_ds_nand(struct usb_device_instance *dev, struct dnload_state *ds) -+{ -+ ds->part = get_partition_nand(dev->alternate - 1); -+ if (!ds->part) { -+ printf("DFU: unable to find partition %u\b", dev->alternate-1); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errADDRESS; -+ return RET_STALL; -+ } -+ ds->nand = &nand_info[ds->part->dev->id->num]; -+ ds->off = ds->part->offset; -+ ds->part_net_size = nand_net_part_size(ds->part); -+ -+ if (ds->nand->erasesize > sizeof(ds->_buf)) { -+ printf("*** Warning - NAND ERASESIZE bigger than static buffer\n"); -+ ds->buf = malloc(ds->nand->erasesize); -+ if (!ds->buf) { -+ printf("DFU: can't allocate %u bytes\n", ds->nand->erasesize); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errADDRESS; -+ return RET_STALL; -+ } -+ } else -+ ds->buf = ds->_buf; -+ -+ ds->ptr = ds->buf; -+ -+ memset(&ds->read_opts, 0, sizeof(ds->read_opts)); -+ -+ memset(&ds->erase_opts, 0, sizeof(ds->erase_opts)); -+ ds->erase_opts.quiet = 1; -+ /* FIXME: do this more dynamic */ -+ if (!strcmp(ds->part->name, "rootfs")) -+ ds->erase_opts.jffs2 = 1; -+ -+ memset(&ds->write_opts, 0, sizeof(ds->write_opts)); -+ ds->write_opts.pad = 1; -+ ds->write_opts.blockalign = 1; -+ ds->write_opts.quiet = 1; -+ -+ debug("initialize_ds_nand(dev=%p, ds=%p): ", dev, ds); -+ debug("nand=%p, ptr=%p, buf=%p, off=0x%x\n", ds->nand, ds->ptr, ds->buf, ds->off); -+ -+ return RET_NOTHING; -+} -+ -+static int erase_flash_verify_nand(struct urb *urb, struct dnload_state *ds, -+ unsigned long erasesize, unsigned long size) -+{ -+ struct usb_device_instance *dev = urb->device; -+ int rc; -+ -+ debug("erase_flash_verify_nand(urb=%p, ds=%p, erase=0x%x size=0x%x)\n", -+ urb, ds, erasesize, size); -+ -+ if (erasesize == ds->nand->erasesize) { -+ /* we're only writing a single block and need to -+ * do bad block skipping / offset adjustments our own */ -+ while (ds->nand->block_isbad(ds->nand, ds->off)) { -+ debug("SKIP_ONE_BLOCK(0x%08x)!!\n", ds->off); -+ ds->off += ds->nand->erasesize; -+ } -+ } -+ -+ /* we have finished one eraseblock, flash it */ -+ ds->erase_opts.offset = ds->off; -+ ds->erase_opts.length = erasesize; -+ debug("Erasing 0x%x bytes @ offset 0x%x (jffs=%u)\n", -+ ds->erase_opts.length, ds->erase_opts.offset, -+ ds->erase_opts.jffs2); -+ rc = nand_erase_opts(ds->nand, &ds->erase_opts); -+ if (rc) { -+ debug("Error erasing\n"); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errERASE; -+ return RET_STALL; -+ } -+ -+ ds->write_opts.buffer = ds->buf; -+ ds->write_opts.length = size; -+ ds->write_opts.offset = ds->off; -+ debug("Writing 0x%x bytes @ offset 0x%x\n", size, ds->off); -+ rc = nand_write_opts(ds->nand, &ds->write_opts); -+ if (rc) { -+ debug("Error writing\n"); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errWRITE; -+ return RET_STALL; -+ } -+ -+ ds->off += size; -+ ds->ptr = ds->buf; -+ -+ /* FIXME: implement verify! */ -+ return RET_NOTHING; -+} -+ -+static int erase_tail_clean_nand(struct urb *urb, struct dnload_state *ds) -+{ -+ struct usb_device_instance *dev = urb->device; -+ int rc; -+ -+ ds->erase_opts.offset = ds->off; -+ ds->erase_opts.length = ds->part->size-ds->off; -+ debug("Erasing 0x%x bytes @ offset 0x%x (jffs=%u)\n", -+ ds->erase_opts.length, ds->erase_opts.offset, -+ ds->erase_opts.jffs2); -+ rc = nand_erase_opts(ds->nand, &ds->erase_opts); -+ if (rc) { -+ debug("Error erasing\n"); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errERASE; -+ return RET_STALL; -+ } -+ -+ ds->off += ds->part->size; /* for consistency */ -+ -+ return RET_NOTHING; -+} -+ -+/* Read the next erase blcok from NAND into buffer */ -+static int read_next_nand(struct urb *urb, struct dnload_state *ds) -+{ -+ struct usb_device_instance *dev = urb->device; -+ int rc; -+ -+ ds->read_opts.buffer = ds->buf; -+ ds->read_opts.length = ds->nand->erasesize; -+ ds->read_opts.offset = ds->off; -+ ds->read_opts.quiet = 1; -+ -+ debug("Reading 0x%x@0x%x to 0x%08p\n", ds->nand->erasesize, -+ ds->off, ds->buf); -+ rc = nand_read_opts(ds->nand, &ds->read_opts); -+ if (rc) { -+ debug("Error reading\n"); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errWRITE; -+ return RET_STALL; -+ } -+ ds->off += ds->nand->erasesize; -+ ds->ptr = ds->buf; -+ -+ return RET_NOTHING; -+} -+ -+ -+static int handle_dnload(struct urb *urb, u_int16_t val, u_int16_t len, int first) -+{ -+ struct usb_device_instance *dev = urb->device; -+ struct dnload_state *ds = &_dnstate; -+ unsigned int actual_len = len; -+ unsigned int remain_len; -+ unsigned long size; -+ int rc; -+ -+ debug("download(len=%u, first=%u) ", len, first); -+ -+ if (len > CONFIG_USBD_DFU_XFER_SIZE) { -+ /* Too big. Not that we'd really care, but it's a -+ * DFU protocol violation */ -+ debug("length exceeds flash page size "); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errADDRESS; -+ return RET_STALL; -+ } -+ -+ if (first) { -+ /* Make sure that we have a valid mtd partition table */ -+ char *mtdp = getenv("mtdparts"); -+ if (!mtdp) -+ run_command("dynpart", 0); -+ } -+ -+ if (len == 0) { -+ debug("zero-size write -> MANIFEST_SYNC "); -+ dev->dfu_state = DFU_STATE_dfuMANIFEST_SYNC; -+ -+ /* cleanup */ -+ switch (dev->alternate) { -+ char buf[12]; -+ case 0: -+ sprintf(buf, "%lx", ds->ptr - ds->buf); -+ setenv("filesize", buf); -+ ds->ptr = ds->buf; -+ break; -+ case 1: -+ if (ds->ptr > -+ ds->buf + sizeof(struct uboot_dfu_trailer)) { -+ struct uboot_dfu_trailer trailer; -+ dfu_trailer_mirror(&trailer, ds->ptr); -+ if (!dfu_trailer_matching(&trailer)) { -+ printf("DFU TRAILER NOT OK\n"); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errTARGET; -+ return RET_STALL; -+ } -+ -+ rc = erase_flash_verify_nand(urb, ds, -+ ds->part->size, -+ ds->part_net_size); -+ /* re-write dynenv marker in OOB */ -+ run_command("dynenv set u-boot_env", 0); -+ } -+ ds->nand = NULL; -+ free(ds->buf); -+ ds->ptr = ds->buf = ds->_buf; -+ break; -+ default: -+ rc = 0; -+ if (ds->ptr > ds->buf) -+ rc = erase_flash_verify_nand(urb, ds, -+ ds->nand->erasesize, -+ ds->nand->erasesize); -+ /* rootfs partition */ -+ if (!rc && dev->alternate == 5) -+ rc = erase_tail_clean_nand(urb, ds); -+ -+ ds->nand = NULL; -+ break; -+ } -+ -+ return RET_ZLP; -+ } -+ -+ if (urb->actual_length != len) { -+ debug("urb->actual_length(%u) != len(%u) ?!? ", -+ urb->actual_length, len); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errADDRESS; -+ return RET_STALL; -+ } -+ -+ if (first && ds->buf && ds->buf != ds->_buf && ds->buf != LOAD_ADDR) { -+ free(ds->buf); -+ ds->buf = ds->_buf; -+ } -+ -+ switch (dev->alternate) { -+ case 0: -+ if (first) { -+ printf("Starting DFU DOWNLOAD to RAM (0x%08p)\n", -+ LOAD_ADDR); -+ ds->buf = LOAD_ADDR; -+ ds->ptr = ds->buf; -+ } -+ -+ memcpy(ds->ptr, urb->buffer, len); -+ ds->ptr += len; -+ break; -+ case 1: -+ if (first) { -+ rc = initialize_ds_nand(dev, ds); -+ if (rc) -+ return rc; -+ ds->buf = malloc(ds->part_net_size); -+ if (!ds->buf) { -+ printf("No memory for atomic buffer!!\n"); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errUNKNOWN; -+ return RET_STALL; -+ } -+ ds->ptr = ds->buf; -+ printf("Starting Atomic DFU DOWNLOAD to partition '%s'\n", -+ ds->part->name); -+ } -+ -+ remain_len = (ds->buf + ds->part_net_size) - ds->ptr; -+ if (remain_len < len) { -+ len = remain_len; -+ printf("End of write exceeds partition end\n"); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errADDRESS; -+ return RET_STALL; -+ } -+ memcpy(ds->ptr, urb->buffer, len); -+ ds->ptr += len; -+ break; -+ default: -+ if (first) { -+ rc = initialize_ds_nand(dev, ds); -+ if (rc) -+ return rc; -+ printf("Starting DFU DOWNLOAD to partition '%s'\n", -+ ds->part->name); -+ } -+ -+ size = ds->nand->erasesize; -+ remain_len = ds->buf + size - ds->ptr; -+ if (remain_len < len) -+ actual_len = remain_len; -+ -+ memcpy(ds->ptr, urb->buffer, actual_len); -+ ds->ptr += actual_len; -+ -+ /* check partition end */ -+ if (ds->off + (ds->ptr - ds->buf) > ds->part->offset + ds->part->size) { -+ printf("End of write exceeds partition end\n"); -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errADDRESS; -+ return RET_STALL; -+ } -+ -+ if (ds->ptr >= ds->buf + size) { -+ rc = erase_flash_verify_nand(urb, ds, -+ ds->nand->erasesize, -+ ds->nand->erasesize); -+ if (rc) -+ return rc; -+ /* copy remainder of data into buffer */ -+ memcpy(ds->ptr, urb->buffer + actual_len, len - actual_len); -+ ds->ptr += (len - actual_len); -+ } -+ break; -+ } -+ -+ return RET_ZLP; -+} -+ -+static int handle_upload(struct urb *urb, u_int16_t val, u_int16_t len, int first) -+{ -+ struct usb_device_instance *dev = urb->device; -+ struct dnload_state *ds = &_dnstate; -+ unsigned int remain; -+ int rc; -+ -+ debug("upload(val=0x%02x, len=%u, first=%u) ", val, len, first); -+ -+ if (len > CONFIG_USBD_DFU_XFER_SIZE) { -+ /* Too big */ -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ dev->dfu_status = DFU_STATUS_errADDRESS; -+ //udc_ep0_send_stall(); -+ debug("Error: Transfer size > CONFIG_USBD_DFU_XFER_SIZE "); -+ return -EINVAL; -+ } -+ -+ switch (dev->alternate) { -+ case 0: -+ if (first) { -+ printf("Starting DFU Upload of RAM (0x%08p)\n", -+ LOAD_ADDR); -+ ds->ptr = ds->buf; -+ } -+ -+ /* FIXME: end at some more dynamic point */ -+ if (ds->ptr + len > LOAD_ADDR + 0x200000) -+ len = (LOAD_ADDR + 0x200000) - ds->ptr; -+ -+ urb->buffer = ds->ptr; -+ urb->actual_length = len; -+ ds->ptr += len; -+ break; -+ default: -+ if (first) { -+ rc = initialize_ds_nand(dev, ds); -+ if (rc) -+ return -EINVAL; -+ printf("Starting DFU Upload of partition '%s'\n", -+ ds->part->name); -+ rc = read_next_nand(urb, ds); -+ if (rc) -+ return -EINVAL; -+ } -+ -+ if (len > ds->nand->erasesize) { -+ printf("We don't support transfers bigger than %u\n", -+ ds->nand->erasesize); -+ len = ds->nand->erasesize; -+ } -+ -+ remain = ds->nand->erasesize - (ds->ptr - ds->buf); -+ if (len < remain) -+ remain = len; -+ -+ debug("copying %u bytes ", remain); -+ urb->buffer = ds->ptr; -+ ds->ptr += remain; -+ urb->actual_length = remain; -+ -+ if (ds->ptr >= ds->buf + ds->nand->erasesize && -+ ds->off < ds->part->offset + ds->part->size) { -+ rc = read_next_nand(urb, ds); -+ if (rc) -+ return -EINVAL; -+ if (len > remain) { -+ debug("copying another %u bytes ", len - remain); -+ memcpy(urb->buffer + remain, ds->ptr, len - remain); -+ ds->ptr += (len - remain); -+ urb->actual_length += (len - remain); -+ } -+ } -+ break; -+ } -+ -+ debug("returning len=%u\n", len); -+ return len; -+} -+ -+static void handle_getstatus(struct urb *urb, int max) -+{ -+ struct usb_device_instance *dev = urb->device; -+ struct dfu_status *dstat = (struct dfu_status *) urb->buffer; -+ -+ debug("getstatus "); -+ -+ if (!urb->buffer || urb->buffer_length < sizeof(*dstat)) { -+ debug("invalid urb! "); -+ return; -+ } -+ -+ switch (dev->dfu_state) { -+ case DFU_STATE_dfuDNLOAD_SYNC: -+ case DFU_STATE_dfuDNBUSY: -+#if 0 -+ if (fsr & AT91C_MC_PROGE) { -+ debug("errPROG "); -+ dev->dfu_status = DFU_STATUS_errPROG; -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ } else if (fsr & AT91C_MC_LOCKE) { -+ debug("errWRITE "); -+ dev->dfu_status = DFU_STATUS_errWRITE; -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ } else if (fsr & AT91C_MC_FRDY) { -+#endif -+ debug("DNLOAD_IDLE "); -+ dev->dfu_state = DFU_STATE_dfuDNLOAD_IDLE; -+#if 0 -+ } else { -+ debug("DNBUSY "); -+ dev->dfu_state = DFU_STATE_dfuDNBUSY; -+ } -+#endif -+ break; -+ case DFU_STATE_dfuMANIFEST_SYNC: -+ break; -+ default: -+ //return; -+ break; -+ } -+ -+ /* send status response */ -+ dstat->bStatus = dev->dfu_status; -+ dstat->bState = dev->dfu_state; -+ dstat->iString = 0; -+ /* FIXME: set dstat->bwPollTimeout */ -+ urb->actual_length = MIN(sizeof(*dstat), max); -+ -+ /* we don't need to explicitly send data here, will -+ * be done by the original caller! */ -+} -+ -+static void handle_getstate(struct urb *urb, int max) -+{ -+ debug("getstate "); -+ -+ if (!urb->buffer || urb->buffer_length < sizeof(u_int8_t)) { -+ debug("invalid urb! "); -+ return; -+ } -+ -+ urb->buffer[0] = urb->device->dfu_state & 0xff; -+ urb->actual_length = sizeof(u_int8_t); -+} -+ -+#ifndef CONFIG_USBD_PRODUCTID_DFU -+#define CONFIG_USBD_PRODUCTID_DFU CONFIG_USBD_PRODUCTID_CDCACM -+#endif -+ -+static const struct usb_device_descriptor dfu_dev_descriptor = { -+ .bLength = USB_DT_DEVICE_SIZE, -+ .bDescriptorType = USB_DT_DEVICE, -+ .bcdUSB = 0x0100, -+ .bDeviceClass = 0x00, -+ .bDeviceSubClass = 0x00, -+ .bDeviceProtocol = 0x00, -+ .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE, -+ .idVendor = CONFIG_USBD_VENDORID, -+ .idProduct = CONFIG_USBD_PRODUCTID_DFU, -+ .bcdDevice = 0x0000, -+ .iManufacturer = DFU_STR_MANUFACTURER, -+ .iProduct = DFU_STR_PRODUCT, -+ .iSerialNumber = DFU_STR_SERIAL, -+ .bNumConfigurations = 0x01, -+}; -+ -+static const struct _dfu_desc dfu_cfg_descriptor = { -+ .ucfg = { -+ .bLength = USB_DT_CONFIG_SIZE, -+ .bDescriptorType = USB_DT_CONFIG, -+ .wTotalLength = USB_DT_CONFIG_SIZE + -+ DFU_NUM_ALTERNATES * USB_DT_INTERFACE_SIZE + -+ USB_DT_DFU_SIZE, -+ .bNumInterfaces = 5, -+ .bConfigurationValue = 1, -+ .iConfiguration = DFU_STR_CONFIG, -+ .bmAttributes = BMATTRIBUTE_RESERVED, -+ .bMaxPower = 50, -+ }, -+ .uif[0] = { -+ .bLength = USB_DT_INTERFACE_SIZE, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0x00, -+ .bAlternateSetting = 0x00, -+ .bNumEndpoints = 0x00, -+ .bInterfaceClass = 0xfe, -+ .bInterfaceSubClass = 0x01, -+ .bInterfaceProtocol = 0x02, -+ .iInterface = DFU_STR_ALT0, -+ }, -+ .uif[1] = { -+ .bLength = USB_DT_INTERFACE_SIZE, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0x00, -+ .bAlternateSetting = 0x01, -+ .bNumEndpoints = 0x00, -+ .bInterfaceClass = 0xfe, -+ .bInterfaceSubClass = 0x01, -+ .bInterfaceProtocol = 0x02, -+ .iInterface = DFU_STR_ALT1, -+ }, -+ .uif[2] = { -+ .bLength = USB_DT_INTERFACE_SIZE, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0x00, -+ .bAlternateSetting = 0x02, -+ .bNumEndpoints = 0x00, -+ .bInterfaceClass = 0xfe, -+ .bInterfaceSubClass = 0x01, -+ .bInterfaceProtocol = 0x02, -+ .iInterface = DFU_STR_ALT2, -+ }, -+ .uif[3] = { -+ .bLength = USB_DT_INTERFACE_SIZE, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0x00, -+ .bAlternateSetting = 0x03, -+ .bNumEndpoints = 0x00, -+ .bInterfaceClass = 0xfe, -+ .bInterfaceSubClass = 0x01, -+ .bInterfaceProtocol = 0x02, -+ .iInterface = DFU_STR_ALT3, -+ }, -+ .uif[4] = { -+ .bLength = USB_DT_INTERFACE_SIZE, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0x00, -+ .bAlternateSetting = 0x04, -+ .bNumEndpoints = 0x00, -+ .bInterfaceClass = 0xfe, -+ .bInterfaceSubClass = 0x01, -+ .bInterfaceProtocol = 0x02, -+ .iInterface = DFU_STR_ALT4, -+ }, -+ .uif[5] = { -+ .bLength = USB_DT_INTERFACE_SIZE, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0x00, -+ .bAlternateSetting = 0x05, -+ .bNumEndpoints = 0x00, -+ .bInterfaceClass = 0xfe, -+ .bInterfaceSubClass = 0x01, -+ .bInterfaceProtocol = 0x02, -+ .iInterface = DFU_STR_ALT5, -+ }, -+ .func_dfu = DFU_FUNC_DESC, -+}; -+ -+int dfu_ep0_handler(struct urb *urb) -+{ -+ int rc, ret = RET_NOTHING; -+ u_int8_t req = urb->device_request.bRequest; -+ u_int16_t val = urb->device_request.wValue; -+ u_int16_t len = urb->device_request.wLength; -+ struct usb_device_instance *dev = urb->device; -+ -+ debug("dfu_ep0(req=0x%x, val=0x%x, len=%u) old_state = %u ", -+ req, val, len, dev->dfu_state); -+ -+ switch (dev->dfu_state) { -+ case DFU_STATE_appIDLE: -+ switch (req) { -+ case USB_REQ_DFU_GETSTATUS: -+ handle_getstatus(urb, len); -+ break; -+ case USB_REQ_DFU_GETSTATE: -+ handle_getstate(urb, len); -+ break; -+ case USB_REQ_DFU_DETACH: -+ dev->dfu_state = DFU_STATE_appDETACH; -+ ret = RET_ZLP; -+ goto out; -+ break; -+ default: -+ ret = RET_STALL; -+ } -+ break; -+ case DFU_STATE_appDETACH: -+ switch (req) { -+ case USB_REQ_DFU_GETSTATUS: -+ handle_getstatus(urb, len); -+ break; -+ case USB_REQ_DFU_GETSTATE: -+ handle_getstate(urb, len); -+ break; -+ default: -+ dev->dfu_state = DFU_STATE_appIDLE; -+ ret = RET_STALL; -+ goto out; -+ break; -+ } -+ /* FIXME: implement timer to return to appIDLE */ -+ break; -+ case DFU_STATE_dfuIDLE: -+ switch (req) { -+ case USB_REQ_DFU_DNLOAD: -+ if (len == 0) { -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ goto out; -+ } -+ dev->dfu_state = DFU_STATE_dfuDNLOAD_SYNC; -+ ret = handle_dnload(urb, val, len, 1); -+ break; -+ case USB_REQ_DFU_UPLOAD: -+ dev->dfu_state = DFU_STATE_dfuUPLOAD_IDLE; -+ handle_upload(urb, val, len, 1); -+ break; -+ case USB_REQ_DFU_ABORT: -+ /* no zlp? */ -+ ret = RET_ZLP; -+ break; -+ case USB_REQ_DFU_GETSTATUS: -+ handle_getstatus(urb, len); -+ break; -+ case USB_REQ_DFU_GETSTATE: -+ handle_getstate(urb, len); -+ break; -+ case USB_REQ_DFU_DETACH: -+ /* Proprietary extension: 'detach' from idle mode and -+ * get back to runtime mode in case of USB Reset. As -+ * much as I dislike this, we just can't use every USB -+ * bus reset to switch back to runtime mode, since at -+ * least the Linux USB stack likes to send a number of resets -+ * in a row :( */ -+ dev->dfu_state = DFU_STATE_dfuMANIFEST_WAIT_RST; -+ break; -+ default: -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ goto out; -+ break; -+ } -+ break; -+ case DFU_STATE_dfuDNLOAD_SYNC: -+ switch (req) { -+ case USB_REQ_DFU_GETSTATUS: -+ handle_getstatus(urb, len); -+ /* FIXME: state transition depending on block completeness */ -+ break; -+ case USB_REQ_DFU_GETSTATE: -+ handle_getstate(urb, len); -+ break; -+ default: -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ goto out; -+ } -+ break; -+ case DFU_STATE_dfuDNBUSY: -+ switch (req) { -+ case USB_REQ_DFU_GETSTATUS: -+ /* FIXME: only accept getstatus if bwPollTimeout -+ * has elapsed */ -+ handle_getstatus(urb, len); -+ break; -+ default: -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ goto out; -+ } -+ break; -+ case DFU_STATE_dfuDNLOAD_IDLE: -+ switch (req) { -+ case USB_REQ_DFU_DNLOAD: -+ dev->dfu_state = DFU_STATE_dfuDNLOAD_SYNC; -+ ret = handle_dnload(urb, val, len, 0); -+ break; -+ case USB_REQ_DFU_ABORT: -+ dev->dfu_state = DFU_STATE_dfuIDLE; -+ ret = RET_ZLP; -+ break; -+ case USB_REQ_DFU_GETSTATUS: -+ handle_getstatus(urb, len); -+ break; -+ case USB_REQ_DFU_GETSTATE: -+ handle_getstate(urb, len); -+ break; -+ default: -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ break; -+ } -+ break; -+ case DFU_STATE_dfuMANIFEST_SYNC: -+ switch (req) { -+ case USB_REQ_DFU_GETSTATUS: -+ /* We're MainfestationTolerant */ -+ dev->dfu_state = DFU_STATE_dfuIDLE; -+ handle_getstatus(urb, len); -+ break; -+ case USB_REQ_DFU_GETSTATE: -+ handle_getstate(urb, len); -+ break; -+ default: -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ break; -+ } -+ break; -+ case DFU_STATE_dfuMANIFEST: -+ /* we should never go here */ -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ break; -+ case DFU_STATE_dfuMANIFEST_WAIT_RST: -+ /* we should never go here */ -+ break; -+ case DFU_STATE_dfuUPLOAD_IDLE: -+ switch (req) { -+ case USB_REQ_DFU_UPLOAD: -+ /* state transition if less data then requested */ -+ rc = handle_upload(urb, val, len, 0); -+ if (rc >= 0 && rc < len) -+ dev->dfu_state = DFU_STATE_dfuIDLE; -+ break; -+ case USB_REQ_DFU_ABORT: -+ dev->dfu_state = DFU_STATE_dfuIDLE; -+ /* no zlp? */ -+ ret = RET_ZLP; -+ break; -+ case USB_REQ_DFU_GETSTATUS: -+ handle_getstatus(urb, len); -+ break; -+ case USB_REQ_DFU_GETSTATE: -+ handle_getstate(urb, len); -+ break; -+ default: -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ break; -+ } -+ break; -+ case DFU_STATE_dfuERROR: -+ switch (req) { -+ case USB_REQ_DFU_GETSTATUS: -+ handle_getstatus(urb, len); -+ break; -+ case USB_REQ_DFU_GETSTATE: -+ handle_getstate(urb, len); -+ break; -+ case USB_REQ_DFU_CLRSTATUS: -+ dev->dfu_state = DFU_STATE_dfuIDLE; -+ dev->dfu_status = DFU_STATUS_OK; -+ /* no zlp? */ -+ ret = RET_ZLP; -+ break; -+ default: -+ dev->dfu_state = DFU_STATE_dfuERROR; -+ ret = RET_STALL; -+ break; -+ } -+ break; -+ default: -+ return DFU_EP0_UNHANDLED; -+ break; -+ } -+ -+out: -+ debug("new_state = %u, ret = %u\n", dev->dfu_state, ret); -+ -+ switch (ret) { -+ case RET_ZLP: -+ //udc_ep0_send_zlp(); -+ urb->actual_length = 0; -+ return DFU_EP0_ZLP; -+ break; -+ case RET_STALL: -+ //udc_ep0_send_stall(); -+ return DFU_EP0_STALL; -+ break; -+ case RET_NOTHING: -+ break; -+ } -+ -+ return DFU_EP0_DATA; -+} -+ -+void str2wide (char *str, u16 * wide); -+static struct usb_string_descriptor *create_usbstring(char *string) -+{ -+ struct usb_string_descriptor *strdesc; -+ int size = sizeof(*strdesc) + strlen(string)*2; -+ -+ if (size > 255) -+ return NULL; -+ -+ strdesc = malloc(size); -+ if (!strdesc) -+ return NULL; -+ -+ strdesc->bLength = size; -+ strdesc->bDescriptorType = USB_DT_STRING; -+ str2wide(string, strdesc->wData); -+ -+ return strdesc; -+} -+ -+ -+static void dfu_init_strings(struct usb_device_instance *dev) -+{ -+ int i; -+ struct usb_string_descriptor *strdesc; -+ -+ strdesc = create_usbstring(CONFIG_DFU_CFG_STR); -+ usb_strings[DFU_STR_CONFIG] = strdesc; -+ -+ for (i = 0; i < DFU_NUM_ALTERNATES; i++) { -+ if (i == 0) { -+ strdesc = create_usbstring(CONFIG_DFU_ALT0_STR); -+ } else { -+ struct part_info *part = get_partition_nand(i-1); -+ -+ if (part) -+ strdesc = create_usbstring(part->name); -+ else -+ strdesc = -+ create_usbstring("undefined partition"); -+ } -+ if (!strdesc) -+ continue; -+ usb_strings[STR_COUNT+i+1] = strdesc; -+ } -+} -+ -+int dfu_init_instance(struct usb_device_instance *dev) -+{ -+ dev->dfu_dev_desc = &dfu_dev_descriptor; -+ dev->dfu_cfg_desc = &dfu_cfg_descriptor; -+ dev->dfu_state = DFU_STATE_appIDLE; -+ dev->dfu_status = DFU_STATUS_OK; -+ -+ if (system_dfu_state) -+ printf("SURPRISE: system_dfu_state is already set\n"); -+ system_dfu_state = &dev->dfu_state; -+ -+ dfu_init_strings(dev); -+ -+ return 0; -+} -+ -+static int stdout_switched; -+ -+/* event handler for usb device state events */ -+void dfu_event(struct usb_device_instance *device, -+ usb_device_event_t event, int data) -+{ -+ char *out; -+ -+ switch (event) { -+ case DEVICE_RESET: -+ switch (device->dfu_state) { -+ case DFU_STATE_appDETACH: -+ device->dfu_state = DFU_STATE_dfuIDLE; -+ out = getenv("stdout"); -+ if (out && !strcmp(out, "usbtty")) { -+ setenv("stdout", "vga"); -+ setenv("stderr", "vga"); -+ stdout_switched = 1; -+ } -+ printf("DFU: Switching to DFU Mode\n"); -+ break; -+ case DFU_STATE_dfuMANIFEST_WAIT_RST: -+ device->dfu_state = DFU_STATE_appIDLE; -+ printf("DFU: Switching back to Runtime mode\n"); -+ if (stdout_switched) { -+ setenv("stdout", "usbtty"); -+ setenv("stderr", "usbtty"); -+ stdout_switched = 0; -+ } -+ break; -+ default: -+ break; -+ } -+ break; -+ case DEVICE_CONFIGURED: -+ case DEVICE_DE_CONFIGURED: -+ debug("SET_CONFIGURATION(%u) ", device->configuration); -+ /* fallthrough */ -+ case DEVICE_SET_INTERFACE: -+ debug("SET_INTERFACE(%u,%u) old_state = %u ", -+ device->interface, device->alternate, -+ device->dfu_state); -+ switch (device->dfu_state) { -+ case DFU_STATE_appIDLE: -+ case DFU_STATE_appDETACH: -+ case DFU_STATE_dfuIDLE: -+ case DFU_STATE_dfuMANIFEST_WAIT_RST: -+ /* do nothing, we're fine */ -+ break; -+ case DFU_STATE_dfuDNLOAD_SYNC: -+ case DFU_STATE_dfuDNBUSY: -+ case DFU_STATE_dfuDNLOAD_IDLE: -+ case DFU_STATE_dfuMANIFEST: -+ device->dfu_state = DFU_STATE_dfuERROR; -+ device->dfu_status = DFU_STATUS_errNOTDONE; -+ /* FIXME: free malloc()ed buffer! */ -+ break; -+ case DFU_STATE_dfuMANIFEST_SYNC: -+ case DFU_STATE_dfuUPLOAD_IDLE: -+ case DFU_STATE_dfuERROR: -+ device->dfu_state = DFU_STATE_dfuERROR; -+ device->dfu_status = DFU_STATUS_errUNKNOWN; -+ break; -+ } -+ debug("new_state = %u\n", device->dfu_state); -+ break; -+ default: -+ break; -+ } -+} -+#endif /* CONFIG_USBD_DFU */ -Index: u-boot/drivers/Makefile -=================================================================== ---- u-boot.orig/drivers/Makefile -+++ u-boot/drivers/Makefile -@@ -47,7 +47,7 @@ - status_led.o sym53c8xx.o systemace.o ahci.o \ - ti_pci1410a.o tigon3.o tsec.o \ - tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ -- usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ -+ usbdcore.o usbdfu.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ - videomodes.o w83c553f.o \ - ks8695eth.o \ - pcf50606.o \ -Index: u-boot/drivers/usbdcore.c -=================================================================== ---- u-boot.orig/drivers/usbdcore.c -+++ u-boot/drivers/usbdcore.c -@@ -31,6 +31,7 @@ - - #include <malloc.h> - #include "usbdcore.h" -+#include <usb_dfu.h> - - #define MAX_INTERFACES 2 - -@@ -212,6 +213,10 @@ - */ - struct usb_device_descriptor *usbd_device_device_descriptor (struct usb_device_instance *device, int port) - { -+#ifdef CONFIG_USBD_DFU -+ if (device->dfu_state != DFU_STATE_appIDLE) -+ return device->dfu_dev_desc; -+#endif - return (device->device_descriptor); - } - -@@ -232,6 +237,10 @@ - if (!(configuration_instance = usbd_device_configuration_instance (device, port, configuration))) { - return NULL; - } -+#ifdef CONFIG_USBD_DFU -+ if (device->dfu_state != DFU_STATE_appIDLE) -+ return (&device->dfu_cfg_desc->ucfg); -+#endif - return (configuration_instance->configuration_descriptor); - } - -@@ -253,6 +262,13 @@ - if (!(interface_instance = usbd_device_interface_instance (device, port, configuration, interface))) { - return NULL; - } -+#ifdef CONFIG_USBD_DFU -+ if (device->dfu_state != DFU_STATE_appIDLE) { -+ if (alternate < 0 || alternate >= DFU_NUM_ALTERNATES) -+ return NULL; -+ return &device->dfu_cfg_desc->uif[alternate]; -+ } -+#endif - if ((alternate < 0) || (alternate >= interface_instance->alternates)) { - return NULL; - } -@@ -681,4 +697,7 @@ - /* usbdbg("calling device->event"); */ - device->event(device, event, data); - } -+#ifdef CONFIG_USBD_DFU -+ dfu_event(device, event, data); -+#endif - } -Index: u-boot/drivers/usbtty.c -=================================================================== ---- u-boot.orig/drivers/usbtty.c -+++ u-boot/drivers/usbtty.c -@@ -31,6 +31,8 @@ - #include "usbtty.h" - #include "usb_cdc_acm.h" - #include "usbdescriptors.h" -+#include <usb_dfu_descriptors.h> -+#include <usb_dfu.h> - #include <config.h> /* If defined, override Linux identifiers with - * vendor specific ones */ - -@@ -118,7 +120,7 @@ - static unsigned short rx_endpoint = 0; - static unsigned short tx_endpoint = 0; - static unsigned short interface_count = 0; --static struct usb_string_descriptor *usbtty_string_table[STR_COUNT]; -+static struct usb_string_descriptor *usbtty_string_table[NUM_STRINGS]; - - /* USB Descriptor Strings */ - static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4}; -@@ -169,6 +171,10 @@ - struct usb_interface_descriptor data_class_interface; - struct usb_endpoint_descriptor - data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed)); -+#ifdef CONFIG_USBD_DFU -+ struct usb_interface_descriptor uif_dfu; -+ struct usb_dfu_func_descriptor func_dfu; -+#endif - } __attribute__((packed)); - - static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = { -@@ -179,7 +185,11 @@ - .bDescriptorType = USB_DT_CONFIG, - .wTotalLength = - cpu_to_le16(sizeof(struct acm_config_desc)), -+#ifdef CONFIG_USBD_DFU -+ .bNumInterfaces = NUM_ACM_INTERFACES +1, -+#else - .bNumInterfaces = NUM_ACM_INTERFACES, -+#endif - .bConfigurationValue = 1, - .iConfiguration = STR_CONFIG, - .bmAttributes = -@@ -278,6 +288,11 @@ - .bInterval = 0xFF, - }, - }, -+#ifdef CONFIG_USBD_DFU -+ /* Interface 3 */ -+ .uif_dfu = DFU_RT_IF_DESC, -+ .func_dfu = DFU_FUNC_DESC, -+#endif - }, - }; - -@@ -390,7 +405,7 @@ - void usbtty_poll (void); - - /* utility function for converting char* to wide string used by USB */ --static void str2wide (char *str, u16 * wide) -+void str2wide (char *str, u16 * wide) - { - int i; - for (i = 0; i < strlen (str) && str[i]; i++){ -@@ -652,6 +667,9 @@ - device_instance->bus = bus_instance; - device_instance->configurations = NUM_CONFIGS; - device_instance->configuration_instance_array = config_instance; -+#ifdef CONFIG_USBD_DFU -+ dfu_init_instance(device_instance); -+#endif - - /* initialize bus instance */ - memset (bus_instance, 0, sizeof (struct usb_bus_instance)); -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -167,7 +167,7 @@ - */ - #define CONFIG_STACKSIZE (128*1024) /* regular stack */ - #ifdef CONFIG_USE_IRQ --#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ - #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ - #endif - -@@ -184,6 +184,10 @@ - #define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" - #define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION - #define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" -+#define CONFIG_USBD_DFU 1 -+#define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ -+#define CONFIG_USBD_DFU_INTERFACE 2 -+ - - /*----------------------------------------------------------------------- - * Physical Memory Map -Index: u-boot/include/usb_dfu.h -=================================================================== ---- /dev/null -+++ u-boot/include/usb_dfu.h -@@ -0,0 +1,99 @@ -+#ifndef _DFU_H -+#define _DFU_H -+ -+/* USB Device Firmware Update Implementation for u-boot -+ * (C) 2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * based on: USB Device Firmware Update Implementation for OpenPCD -+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * This ought to be compliant to the USB DFU Spec 1.0 as available from -+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <asm/types.h> -+#include <usbdescriptors.h> -+#include <usb_dfu_descriptors.h> -+#include <config.h> -+ -+/* USB DFU functional descriptor */ -+#define DFU_FUNC_DESC { \ -+ .bLength = USB_DT_DFU_SIZE, \ -+ .bDescriptorType = USB_DT_DFU, \ -+ .bmAttributes = USB_DFU_CAN_UPLOAD | USB_DFU_CAN_DOWNLOAD | USB_DFU_MANIFEST_TOL, \ -+ .wDetachTimeOut = 0xff00, \ -+ .wTransferSize = CONFIG_USBD_DFU_XFER_SIZE, \ -+ .bcdDFUVersion = 0x0100, \ -+} -+ -+/* USB Interface descriptor in Runtime mode */ -+#define DFU_RT_IF_DESC { \ -+ .bLength = USB_DT_INTERFACE_SIZE, \ -+ .bDescriptorType = USB_DT_INTERFACE, \ -+ .bInterfaceNumber = CONFIG_USBD_DFU_INTERFACE, \ -+ .bAlternateSetting = 0x00, \ -+ .bNumEndpoints = 0x00, \ -+ .bInterfaceClass = 0xfe, \ -+ .bInterfaceSubClass = 0x01, \ -+ .bInterfaceProtocol = 0x01, \ -+ .iInterface = DFU_STR_CONFIG, \ -+} -+ -+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -+ -+#define DFU_NUM_ALTERNATES 6 -+ -+#define DFU_STR_MANUFACTURER STR_MANUFACTURER -+#define DFU_STR_PRODUCT STR_PRODUCT -+#define DFU_STR_SERIAL STR_SERIAL -+#define DFU_STR_CONFIG (STR_COUNT) -+#define DFU_STR_ALT0 (STR_COUNT+1) -+#define DFU_STR_ALT1 (STR_COUNT+2) -+#define DFU_STR_ALT2 (STR_COUNT+3) -+#define DFU_STR_ALT3 (STR_COUNT+4) -+#define DFU_STR_ALT4 (STR_COUNT+5) -+#define DFU_STR_ALT5 (STR_COUNT+6) -+#define DFU_STR_COUNT (STR_COUNT+7) -+ -+#define DFU_NUM_STRINGS (STR_COUNT+8) -+ -+#define CONFIG_DFU_CFG_STR "USB Device Firmware Upgrade" -+#define CONFIG_DFU_ALT0_STR "RAM 0x32000000" -+ -+struct _dfu_desc { -+ struct usb_configuration_descriptor ucfg; -+ struct usb_interface_descriptor uif[DFU_NUM_ALTERNATES]; -+ struct usb_dfu_func_descriptor func_dfu; -+}; -+ -+int dfu_init_instance(struct usb_device_instance *dev); -+ -+#define DFU_EP0_NONE 0 -+#define DFU_EP0_UNHANDLED 1 -+#define DFU_EP0_STALL 2 -+#define DFU_EP0_ZLP 3 -+#define DFU_EP0_DATA 4 -+ -+extern volatile enum dfu_state *system_dfu_state; /* for 3rd parties */ -+ -+int dfu_ep0_handler(struct urb *urb); -+ -+void dfu_event(struct usb_device_instance *device, -+ usb_device_event_t event, int data); -+ -+#endif /* _DFU_H */ -Index: u-boot/include/usb_dfu_descriptors.h -=================================================================== ---- /dev/null -+++ u-boot/include/usb_dfu_descriptors.h -@@ -0,0 +1,94 @@ -+#ifndef _USB_DFU_H -+#define _USB_DFU_H -+/* USB Device Firmware Update Implementation for OpenPCD -+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> -+ * -+ * Protocol definitions for USB DFU -+ * -+ * This ought to be compliant to the USB DFU Spec 1.0 as available from -+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/types.h> -+ -+#define USB_DT_DFU 0x21 -+ -+struct usb_dfu_func_descriptor { -+ u_int8_t bLength; -+ u_int8_t bDescriptorType; -+ u_int8_t bmAttributes; -+#define USB_DFU_CAN_DOWNLOAD (1 << 0) -+#define USB_DFU_CAN_UPLOAD (1 << 1) -+#define USB_DFU_MANIFEST_TOL (1 << 2) -+#define USB_DFU_WILL_DETACH (1 << 3) -+ u_int16_t wDetachTimeOut; -+ u_int16_t wTransferSize; -+ u_int16_t bcdDFUVersion; -+} __attribute__ ((packed)); -+ -+#define USB_DT_DFU_SIZE 9 -+ -+#define USB_TYPE_DFU (USB_TYPE_CLASS|USB_RECIP_INTERFACE) -+ -+/* DFU class-specific requests (Section 3, DFU Rev 1.1) */ -+#define USB_REQ_DFU_DETACH 0x00 -+#define USB_REQ_DFU_DNLOAD 0x01 -+#define USB_REQ_DFU_UPLOAD 0x02 -+#define USB_REQ_DFU_GETSTATUS 0x03 -+#define USB_REQ_DFU_CLRSTATUS 0x04 -+#define USB_REQ_DFU_GETSTATE 0x05 -+#define USB_REQ_DFU_ABORT 0x06 -+ -+struct dfu_status { -+ u_int8_t bStatus; -+ u_int8_t bwPollTimeout[3]; -+ u_int8_t bState; -+ u_int8_t iString; -+} __attribute__((packed)); -+ -+#define DFU_STATUS_OK 0x00 -+#define DFU_STATUS_errTARGET 0x01 -+#define DFU_STATUS_errFILE 0x02 -+#define DFU_STATUS_errWRITE 0x03 -+#define DFU_STATUS_errERASE 0x04 -+#define DFU_STATUS_errCHECK_ERASED 0x05 -+#define DFU_STATUS_errPROG 0x06 -+#define DFU_STATUS_errVERIFY 0x07 -+#define DFU_STATUS_errADDRESS 0x08 -+#define DFU_STATUS_errNOTDONE 0x09 -+#define DFU_STATUS_errFIRMWARE 0x0a -+#define DFU_STATUS_errVENDOR 0x0b -+#define DFU_STATUS_errUSBR 0x0c -+#define DFU_STATUS_errPOR 0x0d -+#define DFU_STATUS_errUNKNOWN 0x0e -+#define DFU_STATUS_errSTALLEDPKT 0x0f -+ -+enum dfu_state { -+ DFU_STATE_appIDLE = 0, -+ DFU_STATE_appDETACH = 1, -+ DFU_STATE_dfuIDLE = 2, -+ DFU_STATE_dfuDNLOAD_SYNC = 3, -+ DFU_STATE_dfuDNBUSY = 4, -+ DFU_STATE_dfuDNLOAD_IDLE = 5, -+ DFU_STATE_dfuMANIFEST_SYNC = 6, -+ DFU_STATE_dfuMANIFEST = 7, -+ DFU_STATE_dfuMANIFEST_WAIT_RST = 8, -+ DFU_STATE_dfuUPLOAD_IDLE = 9, -+ DFU_STATE_dfuERROR = 10, -+}; -+ -+#endif /* _USB_DFU_H */ -Index: u-boot/include/usbdcore.h -=================================================================== ---- u-boot.orig/include/usbdcore.h -+++ u-boot/include/usbdcore.h -@@ -33,6 +33,7 @@ - - #include <common.h> - #include "usbdescriptors.h" -+#include <usb_dfu_descriptors.h> - - - #define MAX_URBS_QUEUED 5 -@@ -475,7 +476,11 @@ - * function driver to inform it that data has arrived. - */ - -+#ifdef CONFIG_USBD_DFU -+#define URB_BUF_SIZE (128+CONFIG_USBD_DFU_XFER_SIZE) -+#else - #define URB_BUF_SIZE 128 /* in linux we'd malloc this, but in u-boot we prefer static data */ -+#endif - struct urb { - - struct usb_endpoint_instance *endpoint; -@@ -603,6 +608,12 @@ - unsigned long usbd_rxtx_timestamp; - unsigned long usbd_last_rxtx_timestamp; - -+#ifdef CONFIG_USBD_DFU -+ const struct usb_device_descriptor *dfu_dev_desc; -+ const struct _dfu_desc *dfu_cfg_desc; -+ enum dfu_state dfu_state; -+ u_int8_t dfu_status; -+#endif - }; - - /* Bus Interface configuration structure -@@ -632,6 +643,8 @@ - extern char *usbd_device_requests[]; - extern char *usbd_device_descriptors[]; - -+extern struct usb_string_descriptor **usb_strings; -+ - void urb_link_init (urb_link * ul); - void urb_detach (struct urb *urb); - urb_link *first_urb_link (urb_link * hd); -Index: u-boot/drivers/usbtty.h -=================================================================== ---- u-boot.orig/drivers/usbtty.h -+++ u-boot/drivers/usbtty.h -@@ -71,4 +71,10 @@ - #define STR_CTRL_INTERFACE 0x06 - #define STR_COUNT 0x07 - -+#ifdef CONFIG_USBD_DFU -+#define NUM_STRINGS DFU_STR_COUNT -+#else -+#define NUM_STRINGS STR_COUNT -+#endif -+ - #endif -Index: u-boot/include/configs/qt2410.h -=================================================================== ---- u-boot.orig/include/configs/qt2410.h -+++ u-boot/include/configs/qt2410.h -@@ -199,7 +199,8 @@ - #define CONFIG_USBD_PRODUCT_NAME "QT2410 Bootloader " U_BOOT_VERSION - #define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" - #define CONFIG_USBD_DFU 1 --#define CONFIG_USBD_DFU_XFER_SIZE 0x4000 -+#define CONFIG_USBD_DFU_XFER_SIZE 4096 -+#define CONFIG_USBD_DFU_INTERFACE 2 - - /*----------------------------------------------------------------------- - * Physical Memory Map -Index: u-boot/tools/Makefile -=================================================================== ---- u-boot.orig/tools/Makefile -+++ u-boot/tools/Makefile -@@ -21,10 +21,10 @@ - # MA 02111-1307 USA - # - --BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) -+BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) mkudfu$(SFX) - - OBJ_LINKS = environment.o crc32.o --OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o -+OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o mkudfu.o - - ifeq ($(ARCH),mips) - BIN_FILES += inca-swap-bytes$(SFX) -@@ -137,6 +137,10 @@ - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ - -+$(obj)mkudfu$(SFX): $(obj)mkudfu.o -+ $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ -+ $(STRIP) $@ -+ - $(obj)ncb$(SFX): $(obj)ncb.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ -Index: u-boot/tools/mkudfu.c -=================================================================== ---- /dev/null -+++ u-boot/tools/mkudfu.c -@@ -0,0 +1,314 @@ -+/* -+ * USB DFU file trailer tool -+ * (C) Copyright by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * based on mkimage.c, copyright information as follows: -+ * -+ * (C) Copyright 2000-2004 -+ * DENX Software Engineering -+ * Wolfgang Denk, wd@denx.de -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <errno.h> -+#include <fcntl.h> -+#include <stdio.h> -+#include <stdlib.h> -+#include <string.h> -+#ifndef __WIN32__ -+#include <netinet/in.h> /* for host / network byte order conversions */ -+#endif -+#include <sys/mman.h> -+#include <sys/stat.h> -+#include <time.h> -+#include <unistd.h> -+ -+#if defined(__BEOS__) || defined(__NetBSD__) || defined(__APPLE__) -+#include <inttypes.h> -+#endif -+ -+#ifdef __WIN32__ -+typedef unsigned int __u32; -+ -+#define SWAP_LONG(x) \ -+ ((__u32)( \ -+ (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \ -+ (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ -+ (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \ -+ (((__u32)(x) & (__u32)0xff000000UL) >> 24) )) -+typedef unsigned char uint8_t; -+typedef unsigned short uint16_t; -+typedef unsigned int uint32_t; -+ -+#define ntohl(a) SWAP_LONG(a) -+#define htonl(a) SWAP_LONG(a) -+#endif /* __WIN32__ */ -+ -+#ifndef O_BINARY /* should be define'd on __WIN32__ */ -+#define O_BINARY 0 -+#endif -+ -+#include <usb_dfu_trailer.h> -+ -+extern int errno; -+ -+#ifndef MAP_FAILED -+#define MAP_FAILED (-1) -+#endif -+ -+static char *cmdname; -+ -+static char *datafile; -+static char *imagefile; -+ -+ -+static void usage() -+{ -+ fprintf (stderr, "%s - create / display u-boot DFU trailer\n", cmdname); -+ fprintf (stderr, "Usage: %s -l image\n" -+ " -l ==> list image header information\n" -+ " %s -v VID -p PID -r REV -d data_file image\n", -+ cmdname, cmdname); -+ fprintf (stderr, " -v ==> set vendor ID to 'VID'\n" -+ " -p ==> set product ID system to 'PID'\n" -+ " -r ==> set hardware revision to 'REV'\n" -+ " -d ==> use 'data_file' as input file\n" -+ ); -+ exit (EXIT_FAILURE); -+} -+ -+static void print_trailer(struct uboot_dfu_trailer *trailer) -+{ -+ printf("===> DFU Trailer information:\n"); -+ printf("Trailer Vers.: %d\n", trailer->version); -+ printf("Trailer Length: %d\n", trailer->length); -+ printf("VendorID: 0x%04x\n", trailer->vendor); -+ printf("ProductID: 0x%04x\n", trailer->product); -+ printf("HW Revision: 0x%04x\n", trailer->revision); -+} -+ -+static void copy_file (int ifd, const char *datafile, int pad) -+{ -+ int dfd; -+ struct stat sbuf; -+ unsigned char *ptr; -+ int tail; -+ int zero = 0; -+ int offset = 0; -+ int size; -+ -+ if ((dfd = open(datafile, O_RDONLY|O_BINARY)) < 0) { -+ fprintf (stderr, "%s: Can't open %s: %s\n", -+ cmdname, datafile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ if (fstat(dfd, &sbuf) < 0) { -+ fprintf (stderr, "%s: Can't stat %s: %s\n", -+ cmdname, datafile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ ptr = (unsigned char *)mmap(0, sbuf.st_size, -+ PROT_READ, MAP_SHARED, dfd, 0); -+ if (ptr == (unsigned char *)MAP_FAILED) { -+ fprintf (stderr, "%s: Can't read %s: %s\n", -+ cmdname, datafile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ size = sbuf.st_size - offset; -+ if (write(ifd, ptr + offset, size) != size) { -+ fprintf (stderr, "%s: Write error on %s: %s\n", -+ cmdname, imagefile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ if (pad && ((tail = size % 4) != 0)) { -+ -+ if (write(ifd, (char *)&zero, 4-tail) != 4-tail) { -+ fprintf (stderr, "%s: Write error on %s: %s\n", -+ cmdname, imagefile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ } -+ -+ (void) munmap((void *)ptr, sbuf.st_size); -+ (void) close (dfd); -+} -+ -+ -+int main(int argc, char **argv) -+{ -+ int ifd; -+ int lflag = 0; -+ struct stat sbuf; -+ u_int16_t opt_vendor, opt_product, opt_revision; -+ struct uboot_dfu_trailer _hdr, _mirror, *hdr = &_hdr; -+ -+ opt_vendor = opt_product = opt_revision = 0; -+ -+ cmdname = *argv; -+ -+ while (--argc > 0 && **++argv == '-') { -+ while (*++*argv) { -+ switch (**argv) { -+ case 'l': -+ lflag = 1; -+ break; -+ case 'v': -+ if (--argc <= 0) -+ usage (); -+ opt_vendor = strtoul(*++argv, NULL, 16); -+ goto NXTARG; -+ case 'p': -+ if (--argc <= 0) -+ usage (); -+ opt_product = strtoul(*++argv, NULL, 16); -+ goto NXTARG; -+ case 'r': -+ if (--argc <= 0) -+ usage (); -+ opt_revision = strtoul(*++argv, NULL, 16); -+ goto NXTARG; -+ case 'd': -+ if (--argc <= 0) -+ usage (); -+ datafile = *++argv; -+ goto NXTARG; -+ case 'h': -+ usage(); -+ break; -+ default: -+ usage(); -+ } -+ } -+NXTARG: ; -+ } -+ -+ if (argc != 1) -+ usage(); -+ -+ imagefile = *argv; -+ -+ if (lflag) -+ ifd = open(imagefile, O_RDONLY|O_BINARY); -+ else -+ ifd = open(imagefile, O_RDWR|O_CREAT|O_TRUNC|O_BINARY, 0666); -+ -+ if (ifd < 0) { -+ fprintf (stderr, "%s: Can't open %s: %s\n", -+ cmdname, imagefile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ if (lflag) { -+ unsigned char *ptr; -+ /* list header information of existing image */ -+ if (fstat(ifd, &sbuf) < 0) { -+ fprintf (stderr, "%s: Can't stat %s: %s\n", -+ cmdname, imagefile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ if ((unsigned)sbuf.st_size < sizeof(struct uboot_dfu_trailer)) { -+ fprintf (stderr, -+ "%s: Bad size: \"%s\" is no valid image\n", -+ cmdname, imagefile); -+ exit (EXIT_FAILURE); -+ } -+ -+ ptr = (unsigned char *)mmap(0, sbuf.st_size, -+ PROT_READ, MAP_SHARED, ifd, 0); -+ if ((caddr_t)ptr == (caddr_t)-1) { -+ fprintf (stderr, "%s: Can't read %s: %s\n", -+ cmdname, imagefile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ dfu_trailer_mirror(hdr, ptr+sbuf.st_size); -+ -+ if (hdr->magic != UBOOT_DFU_TRAILER_MAGIC) { -+ fprintf (stderr, -+ "%s: Bad Magic Number: \"%s\" is no valid image\n", -+ cmdname, imagefile); -+ exit (EXIT_FAILURE); -+ } -+ -+ /* for multi-file images we need the data part, too */ -+ print_trailer(hdr); -+ -+ (void) munmap((void *)ptr, sbuf.st_size); -+ (void) close (ifd); -+ -+ exit (EXIT_SUCCESS); -+ } -+ -+ /* if we're not listing: */ -+ -+ copy_file (ifd, datafile, 0); -+ -+ memset (hdr, 0, sizeof(struct uboot_dfu_trailer)); -+ -+ /* Build new header */ -+ hdr->version = UBOOT_DFU_TRAILER_V1; -+ hdr->magic = UBOOT_DFU_TRAILER_MAGIC; -+ hdr->length = sizeof(struct uboot_dfu_trailer); -+ hdr->vendor = opt_vendor; -+ hdr->product = opt_product; -+ hdr->revision = opt_revision; -+ -+ print_trailer(hdr); -+ dfu_trailer_mirror(&_mirror, (unsigned char *)hdr+sizeof(*hdr)); -+ -+ if (write(ifd, &_mirror, sizeof(struct uboot_dfu_trailer)) -+ != sizeof(struct uboot_dfu_trailer)) { -+ fprintf (stderr, "%s: Write error on %s: %s\n", -+ cmdname, imagefile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ /* We're a bit of paranoid */ -+#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) -+ (void) fdatasync (ifd); -+#else -+ (void) fsync (ifd); -+#endif -+ -+ if (fstat(ifd, &sbuf) < 0) { -+ fprintf (stderr, "%s: Can't stat %s: %s\n", -+ cmdname, imagefile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ /* We're a bit of paranoid */ -+#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) -+ (void) fdatasync (ifd); -+#else -+ (void) fsync (ifd); -+#endif -+ -+ if (close(ifd)) { -+ fprintf (stderr, "%s: Write error on %s: %s\n", -+ cmdname, imagefile, strerror(errno)); -+ exit (EXIT_FAILURE); -+ } -+ -+ exit (EXIT_SUCCESS); -+} -Index: u-boot/include/usb_dfu_trailer.h -=================================================================== ---- /dev/null -+++ u-boot/include/usb_dfu_trailer.h -@@ -0,0 +1,31 @@ -+#ifndef _USB_DFU_TRAILER_H -+#define _USB_DFU_TRAILER_H -+ -+/* trailer handling for DFU files */ -+ -+#define UBOOT_DFU_TRAILER_V1 1 -+#define UBOOT_DFU_TRAILER_MAGIC 0x19731978 -+struct uboot_dfu_trailer { -+ u_int32_t magic; -+ u_int16_t version; -+ u_int16_t length; -+ u_int16_t vendor; -+ u_int16_t product; -+ u_int32_t revision; -+} __attribute__((packed)); -+ -+/* we mirror the trailer because we want it to be longer in later versions -+ * while keeping backwards compatibility */ -+static inline void dfu_trailer_mirror(struct uboot_dfu_trailer *trailer, -+ unsigned char *eof) -+{ -+ int i; -+ int len = sizeof(struct uboot_dfu_trailer); -+ unsigned char *src = eof - len; -+ unsigned char *dst = (unsigned char *) trailer; -+ -+ for (i = 0; i < len; i++) -+ dst[len-1-i] = src[i]; -+} -+ -+#endif /* _USB_DFU_TRAILER_H */ -Index: u-boot/Makefile -=================================================================== ---- u-boot.orig/Makefile -+++ u-boot/Makefile -@@ -261,6 +261,12 @@ - $(obj)u-boot.bin: $(obj)u-boot - $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ - -+$(obj)u-boot.udfu: $(obj)u-boot.bin -+ ./tools/mkudfu -v $(CONFIG_USB_DFU_VENDOR) \ -+ -p $(CONFIG_USB_DFU_PRODUCT) \ -+ -r $(CONFIG_USB_DFU_REVISION) \ -+ -d $< $@ -+ - $(obj)u-boot.img: $(obj)u-boot.bin - ./tools/mkimage -A $(ARCH) -T firmware -C none \ - -a $(TEXT_BASE) -e 0 \ -Index: u-boot/board/neo1973/gta01/split_by_variant.sh -=================================================================== ---- u-boot.orig/board/neo1973/gta01/split_by_variant.sh -+++ u-boot/board/neo1973/gta01/split_by_variant.sh -@@ -15,37 +15,44 @@ - echo "$0:: No parameters - using GTA01Bv3 config" - echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC - echo "GTA01_BIG_RAM=y" > $CFGTMP -+ echo "CONFIG_USB_DFU_REVISION=0x0230" > $CFGTMP - else - case "$1" in - gta01v4_config) - echo "#define CONFIG_ARCH_GTA01_v4" > $CFGINC - echo "GTA01_BIG_RAM=n" > $CFGTMP -+ echo "CONFIG_USB_DFU_REVISION=0x0140" > $CFGTMP - ;; - - gta01v3_config) - echo "#define CONFIG_ARCH_GTA01_v3" > $CFGINC - echo "GTA01_BIG_RAM=n" > $CFGTMP -+ echo "CONFIG_USB_DFU_REVISION=0x0130" > $CFGTMP - ;; - - gta01bv2_config) - echo "#define CONFIG_ARCH_GTA01B_v2" > $CFGINC - echo "GTA01_BIG_RAM=y" > $CFGTMP -+ echo "CONFIG_USB_DFU_REVISION=0x0220" > $CFGTMP - ;; - - gta01bv3_config) - echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC - echo "GTA01_BIG_RAM=y" > $CFGTMP -+ echo "CONFIG_USB_DFU_REVISION=0x0230" > $CFGTMP - ;; - - gta01bv4_config) - echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC - echo "GTA01_BIG_RAM=y" > $CFGTMP -+ echo "CONFIG_USB_DFU_REVISION=0x0240" > $CFGTMP - ;; - - *) - echo "$0:: Unrecognised config - using GTA01Bv4 config" - echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC - echo "GTA01_BIG_RAM=y" > $CFGTMP -+ echo "CONFIG_USB_DFU_REVISION=0x0240" > $CFGTMP - ;; - - esac -Index: u-boot/board/neo1973/gta01/config.mk -=================================================================== ---- u-boot.orig/board/neo1973/gta01/config.mk -+++ u-boot/board/neo1973/gta01/config.mk -@@ -24,6 +24,9 @@ - # - # download area is 3200'0000 or 3300'0000 - -+CONFIG_USB_DFU_VENDOR=0x1457 -+CONFIG_USB_DFU_PRODUCT=0x5119 -+ - sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - - ifeq ($(GTA01_BIG_RAM),y) diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-gta02.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-gta02.patch deleted file mode 100644 index ca54ebeff7..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-gta02.patch +++ /dev/null @@ -1,1560 +0,0 @@ -Add support for new GTA02 version of Neo1973 - -Index: u-boot/Makefile -=================================================================== ---- u-boot.orig/Makefile -+++ u-boot/Makefile -@@ -2038,6 +2038,10 @@ - sbc2410x_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 - -+gta02_config \ -+gta02v1_config : unconfig -+ @sh board/neo1973/gta02/split_by_variant.sh $@ -+ - gta01_config \ - gta01v3_config \ - gta01bv2_config \ -Index: u-boot/board/neo1973/gta02/Makefile -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta02/Makefile -@@ -0,0 +1,64 @@ -+# -+# (C) Copyright 2000, 2001, 2002 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = lib$(BOARD).a -+ -+OBJS := gta02.o pcf50633.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o -+SOBJS := ../common/lowlevel_init.o -+ -+.PHONY: all -+ -+all: $(LIB) lowevel_foo.bin -+ -+$(LIB): $(OBJS) $(SOBJS) -+ $(AR) crv $@ $(OBJS) $(SOBJS) -+ -+lowlevel_foo.o: ../common/lowlevel_foo.S -+ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ -+ -o lowlevel_foo.o ../common/lowlevel_foo.S -+ -+lowlevel_foo: lowlevel_foo.o ../common/lowlevel_init.o ../common/lowlevel_foo.lds -+ $(LD) -T ../common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ -+ ../common/lowlevel_init.o lowlevel_foo.o -o lowlevel_foo -+ -+lowevel_foo.bin: lowlevel_foo -+ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ -+ lowlevel_foo lowlevel_foo.bin -+ -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend lowlevel_foo.bin -+ -+######################################################################### -+ -+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) -+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -+ -+-include .depend -+ -+######################################################################### -Index: u-boot/board/neo1973/gta02/gta02.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta02/gta02.c -@@ -0,0 +1,313 @@ -+/* -+ * (C) 2006-2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * based on existing S3C2410 startup code in u-boot: -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2440.h> -+#include <i2c.h> -+ -+#include "../common/neo1973.h" -+#include "../common/jbt6k74.h" -+ -+#include "pcf50633.h" -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+/* That many seconds the power key needs to be pressed to power up */ -+#define POWER_KEY_SECONDS 2 -+ -+#define M_MDIV 0x7f /* Fout = 405.00MHz */ -+#define M_PDIV 0x2 -+#define M_SDIV 0x1 -+ -+#define U_M_MDIV 0x38 -+#define U_M_PDIV 0x2 -+#define U_M_SDIV 0x2 -+ -+unsigned int neo1973_wakeup_cause; -+extern int nobootdelay; -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+#if defined(CONFIG_ARCH_GTA02_v1) -+ gpio->GPACON = 0x007E1FFF; -+ gpio->GPADAT |= (1 << 16); /* Set GPA16 to high (nNAND_WP) */ -+ -+ gpio->GPBCON = 0x00155555; -+ gpio->GPBUP = 0x000007FF; -+ -+ gpio->GPCCON = 0x55551155; -+ gpio->GPCUP = 0x0000FFFF; -+ -+ gpio->GPDCON = 0x55555555; -+ gpio->GPDUP = 0x0000FFFF; -+ -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ -+ gpio->GPFCON = 0x0000AAAA; -+ gpio->GPFUP = 0x000000FF; -+ -+ gpio->GPGCON = 0x013DFDFA; -+ gpio->GPGUP = 0x0000FFFF; -+ -+ gpio->GPHCON = 0x0028AAAA; -+ gpio->GPHUP = 0x000007FF; -+ -+ gpio->GPJCON = 0x1545541; -+#else -+#error Please define GTA02 version -+#endif -+ -+ /* arch number of SMDK2410-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA02; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int board_late_init(void) -+{ -+ extern unsigned char booted_from_nand; -+ unsigned char tmp; -+ char buf[32]; -+ int menu_vote = 0; /* <= 0: no, > 0: yes */ -+ int seconds = 0; -+ -+ /* Initialize the Power Management Unit with a safe register set */ -+ pcf50633_init(); -+#if 0 -+ /* if there's no other reason, must be regular reset */ -+ neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; -+ -+ if (!booted_from_nand) -+ goto woken_by_reset; -+ -+ /* obtain wake-up reason, save INT1 in environment */ -+ tmp = pcf50606_reg_read(PCF50606_REG_INT1); -+ sprintf(buf, "0x%02x", tmp); -+ setenv("pcf50606_int1", buf); -+ -+ if (tmp & PCF50606_INT1_ALARM) { -+ /* we've been woken up by RTC alarm, boot */ -+ neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM; -+ goto continue_boot; -+ } -+ if (tmp & PCF50606_INT1_EXTONR) { -+ /* we've been woken up by charger insert */ -+ neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER; -+ } -+ -+ if (tmp & PCF50606_INT1_ONKEYF) { -+ /* we've been woken up by a falling edge of the onkey */ -+ neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; -+ } -+ -+ if (neo1973_wakeup_cause == NEO1973_WAKEUP_CHARGER) { -+ /* if we still think it was only a charger insert, boot */ -+ goto continue_boot; -+ } -+ -+woken_by_reset: -+ -+ while (neo1973_wakeup_cause == NEO1973_WAKEUP_RESET || -+ neo1973_on_key_pressed()) { -+ if (neo1973_aux_key_pressed()) -+ menu_vote++; -+ else -+ menu_vote--; -+ -+ if (neo1973_new_second()) -+ seconds++; -+ if (seconds >= POWER_KEY_SECONDS) -+ goto continue_boot; -+ } -+ /* Power off if minimum number of seconds not reached */ -+ neo1973_poweroff(); -+ -+continue_boot: -+ jbt6k74_init(); -+ jbt6k74_enter_state(JBT_STATE_NORMAL); -+ jbt6k74_display_onoff(1); -+#endif -+ -+ /* issue a short pulse with the vibrator */ -+ neo1973_vibrator(1); -+ udelay(50000); -+ neo1973_vibrator(0); -+ -+ /* switch on the backlight */ -+ neo1973_backlight(1); -+ -+#if 0 -+ { -+ /* check if sd card is inserted, and power-up if it is */ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ if (!(gpio->GPFDAT & (1 << 5))) -+ gpio->GPBDAT &= ~(1 << 2); -+ } -+ -+ if (menu_vote > 0) { -+ bootmenu(); -+ nobootdelay = 1; -+ } -+#endif -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -+ -+u_int32_t get_board_rev(void) -+{ -+#if defined(CONFIG_ARCH_GTA02_v1) -+ return 0x00000310; -+#endif -+} -+ -+void neo1973_poweroff(void) -+{ -+ printf("poweroff\n"); -+ udc_disconnect(); -+ pcf50633_reg_write(PCF50633_REG_OOCSHDWN, 0x01); -+ /* don't return to caller */ -+ while (1) ; -+} -+ -+void neo1973_backlight(int on) -+{ -+ /* FIXME: PMU based implementation */ -+} -+ -+/* FIXME: shared */ -+void neo1973_vibrator(int on) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ if (on) -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+ gpio->GPGDAT |= (1 << 11); /* GPG11 */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+ gpio->GPBDAT |= (1 << 10); /* GPB10 */ -+#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) -+ gpio->GPBDAT |= (1 << 3); /* GPB3 */ -+#endif -+ else -+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) -+ gpio->GPGDAT &= ~(1 << 11); /* GPG11 */ -+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) -+ gpio->GPBDAT &= ~(1 << 10); /* GPB10 */ -+#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) -+ gpio->GPBDAT &= ~(1 << 3); /* GPB3 */ -+#endif -+} -+ -+int neo1973_new_second(void) -+{ -+ return pcf50633_reg_read(PCF50633_REG_INT1) & PCF50633_INT1_SECOND; -+} -+ -+int neo1973_on_key_pressed(void) -+{ -+ return !(pcf50633_reg_read(PCF50633_REG_OOCSTAT) -+ & PCF50633_OOCSTAT_ONKEY); -+} -+ -+/* FIXME: shared */ -+int neo1973_aux_key_pressed(void) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ if (gpio->GPFDAT & (1 << 6)) -+ return 0; -+ return 1; -+} -+ -+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. -+ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 -+ images: 640*480*2*2 = 1228800 < 1245184. */ -+ -+unsigned int dynpart_size[] = { -+ CFG_UBOOT_SIZE, CFG_ENV_SIZE, 0x200000, 0xa0000, 0x1fce0000, 0 }; -+char *dynpart_names[] = { -+ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; -+ -+ -+const char *neo1973_get_charge_status(void) -+{ -+ /* FIXME */ -+ return "unknown"; -+} -+ -+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd) -+{ -+ /* FIXME */ -+ return 0; -+} -Index: u-boot/board/neo1973/gta02/u-boot.lds -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta02/u-boot.lds -@@ -0,0 +1,58 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ cpu/arm920t/s3c24x0/nand_read.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/include/configs/neo1973_gta02.h -=================================================================== ---- /dev/null -+++ u-boot/include/configs/neo1973_gta02.h -@@ -0,0 +1,276 @@ -+/* -+ * (C) Copyright 2007 OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * Configuation settings for the FIC Neo1973 GTA02 Linux GSM phone -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* we want to be able to start u-boot directly from within NAND flash */ -+#define CONFIG_LL_INIT_NAND_ONLY -+#define CONFIG_S3C2410_NAND_BOOT 1 -+#define CONFIG_S3C2410_NAND_SKIP_BAD 1 -+ -+#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2410 SoC */ -+#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2410 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA02 has this input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024) -+ /* >> CFG_VIDEO_LOGO_MAX_SIZE */ -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL3 1 /* we use SERIAL 1 on GTA01 */ -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS (\ -+ CFG_CMD_BDI | \ -+ CFG_CMD_LOADS | \ -+ CFG_CMD_LAODB | \ -+ CFG_CMD_IMI | \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_MEMORY | \ -+ CFG_CMD_ENV | \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_BOOTD | \ -+ CFG_CMD_CONSOLE | \ -+ /* CFG_CMD_BMP | */ \ -+ CFG_CMD_ASKENV | \ -+ CFG_CMD_RUN | \ -+ CFG_CMD_ECHO | \ -+ CFG_CMD_I2C | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_IMMAP | \ -+ CFG_CMD_DATE | \ -+ CFG_CMD_AUTOSCRIPT | \ -+ CFG_CMD_BSP | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_MISC | \ -+ /* CFG_CMD_USB | */ \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_DIAG | \ -+ /* CFG_CMD_HWFLOW | */ \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_FAT | \ -+ CFG_CMD_EXT2 | \ -+ 0) -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "" -+#define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#if defined(CONFIG_ARCH_GTA02_v1) -+#define CFG_PROMPT "GTA02v1 # " /* Monitor Command Prompt */ -+#endif -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 64 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x33000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+#define CFG_BOOTMENU -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+#if 0 -+#define CONFIG_USB_OHCI 1 -+#endif -+ -+#define CONFIG_USB_DEVICE 1 -+#define CONFIG_USB_TTY 1 -+#define CFG_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ -+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ -+#define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ -+#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" -+#define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION -+#define CONFIG_USBD_DFU 1 -+#define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ -+#define CONFIG_USBD_DFU_INTERFACE 2 -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "usbtty=cdc_acm\0" \ -+ "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8\0" \ -+ "" -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+/* No NOR flash in this device */ -+#define CFG_NO_FLASH 1 -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x40000 /* 128k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ -+#define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+/* EXT2 driver */ -+#define CONFIG_EXT2 1 -+ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT -+ -+#if 1 -+/* JFFS2 driver */ -+#define CONFIG_JFFS2_CMDLINE 1 -+#define CONFIG_JFFS2_NAND 1 -+#define CONFIG_JFFS2_NAND_DEV 0 -+//#define CONFIG_JFFS2_NAND_OFF 0x634000 -+//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+#endif -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#endif -+ -+#define CONFIG_DRIVER_S3C24X0_I2C 1 -+#define CONFIG_HARD_I2C 1 -+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50633 data sheet */ -+#define CFG_I2C_SLAVE 0x7f -+ -+/* we have a board_late_init() function */ -+#define BOARD_LATE_INIT 1 -+ -+#if 0 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_SPLASH_SCREEN -+#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ -+#define CONFIG_VIDEO_BMP_GZIP -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+#define CONFIG_UNZIP -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#define CONFIG_S3C2410_NAND_BBT 1 -+//#define CONFIG_S3C2410_NAND_HWECC 1 -+ -+#define CONFIG_DRIVER_PCF50633 1 -+ -+#define MTDIDS_DEFAULT "nand0=neo1973-nand" -+#define MTPARTS_DEFAULT "neo1973-nand:256k(u-boot),128k(u-boot_env),2M(kernel),640k(splash),-(jffs2)" -+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand" -+#define CONFIG_NAND_DYNPART -+ -+#endif /* __CONFIG_H */ -Index: u-boot/board/neo1973/gta02/split_by_variant.sh -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta02/split_by_variant.sh -@@ -0,0 +1,37 @@ -+#!/bin/sh -+# --------------------------------------------------------- -+# Set the core module defines according to Core Module -+# --------------------------------------------------------- -+# --------------------------------------------------------- -+# Set up the GTA01 type define -+# --------------------------------------------------------- -+ -+CFGINC=${obj}include/config.h -+CFGTMP=${obj}board/neo1973/gta02/config.tmp -+ -+mkdir -p ${obj}include -+if [ "$1" == "" ] -+then -+ echo "$0:: No parameters - using GTA02Bv1 config" -+ echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC -+ echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP -+else -+ case "$1" in -+ gta02v1_config) -+ echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC -+ echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP -+ ;; -+ -+ *) -+ echo "$0:: Unrecognised config - using GTA02v1 config" -+ echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC -+ echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP -+ ;; -+ -+ esac -+ -+fi -+# --------------------------------------------------------- -+# Complete the configuration -+# --------------------------------------------------------- -+$MKCONFIG -a neo1973_gta02 arm arm920t gta02 neo1973 s3c24x0 -Index: u-boot/include/pcf50633.h -=================================================================== ---- /dev/null -+++ u-boot/include/pcf50633.h -@@ -0,0 +1,235 @@ -+#ifndef _PCF50633_H -+#define _PCF50633_H -+ -+/* Philips PCF50633 Power Managemnt Unit (PMU) driver -+ * (C) 2006-2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ */ -+ -+enum pfc50633_regs { -+ PCF50633_REG_VERSION = 0x00, -+ PCF50633_REG_VARIANT = 0x01, -+ PCF50633_REG_INT1 = 0x02, /* Interrupt Status */ -+ PCF50633_REG_INT2 = 0x03, /* Interrupt Status */ -+ PCF50633_REG_INT3 = 0x04, /* Interrupt Status */ -+ PCF50633_REG_INT4 = 0x05, /* Interrupt Status */ -+ PCF50633_REG_INT5 = 0x06, /* Interrupt Status */ -+ PCF50633_REG_INT1M = 0x07, /* Interrupt Mask */ -+ PCF50633_REG_INT2M = 0x08, /* Interrupt Mask */ -+ PCF50633_REG_INT3M = 0x09, /* Interrupt Mask */ -+ PCF50633_REG_INT4M = 0x0a, /* Interrupt Mask */ -+ PCF50633_REG_INT5M = 0x0b, /* Interrupt Mask */ -+ PCF50633_REG_OOCSHDWN = 0x0c, -+ PCF50633_REG_OOCWAKE = 0x0d, -+ PCF50633_REG_OOCTIM1 = 0x0e, -+ PCF50633_REG_OOCTIM2 = 0x0f, -+ PCF50633_REG_OOCMODE = 0x10, -+ PCF50633_REG_OOCCTL = 0x11, -+ PCF50633_REG_OOCSTAT = 0x12, -+ PCF50633_REG_GPIOCTL = 0x13, -+ PCF50633_REG_GPIO1CFG = 0x14, -+ PCF50633_REG_GPIO2CFG = 0x15, -+ PCF50633_REG_GPIO3CFG = 0x16, -+ PCF50633_REG_GPOCFG = 0x17, -+ PCF50633_REG_BVMCTL = 0x18, -+ PCF50633_REG_SVMCTL = 0x19, -+ PCF50633_REG_AUTOOUT = 0x1a, -+ PCF50633_REG_AUTOENA = 0x1b, -+ PCF50633_REG_AUTOCTL = 0x1c, -+ PCF50633_REG_AUTOMXC = 0x1d, -+ PCF50633_REG_DOWN1OUT = 0x1e, -+ PCF50633_REG_DOWN1ENA = 0x1f, -+ PCF50633_REG_DOWN1CTL = 0x20, -+ PCF50633_REG_DOWN1MXC = 0x21, -+ PCF50633_REG_DOWN2OUT = 0x22, -+ PCF50633_REG_DOWN2ENA = 0x23, -+ PCF50633_REG_DOWN2CTL = 0x24, -+ PCF50633_REG_DOWN2MXC = 0x25, -+ PCF50633_REG_MEMLDOOUT = 0x26, -+ PCF50633_REG_MEMLDOENA = 0x27, -+ PCF50633_REG_LEDOUT = 0x28, -+ PCF50633_REG_LEDENA = 0x29, -+ PCF50633_REG_LEDCTL = 0x2a, -+ PCF50633_REG_LEDDIM = 0x2b, -+ /* reserved */ -+ PCF50633_REG_LDO1OUT = 0x2d, -+ PCF50633_REG_LDO1ENA = 0x2e, -+ PCF50633_REG_LDO2OUT = 0x2f, -+ PCF50633_REG_LDO2ENA = 0x30, -+ PCF50633_REG_LDO3OUT = 0x31, -+ PCF50633_REG_LDO3ENA = 0x32, -+ PCF50633_REG_LDO4OUT = 0x33, -+ PCF50633_REG_LDO4ENA = 0x34, -+ PCF50633_REG_LDO5OUT = 0x35, -+ PCF50633_REG_LDO5ENA = 0x36, -+ PCF50633_REG_LDO6OUT = 0x37, -+ PCF50633_REG_LDO6ENA = 0x38, -+ PCF50633_REG_HCLDOOUT = 0x39, -+ PCF50633_REG_HCLDOENA = 0x3a, -+ PCF50633_REG_STBYCTL1 = 0x3b, -+ PCF50633_REG_STBYCTL2 = 0x3c, -+ PCF50633_REG_DEBPF1 = 0x3d, -+ PCF50633_REG_DEBPF2 = 0x3e, -+ PCF50633_REG_DEBPF3 = 0x3f, -+ PCF50633_REG_HCLDOOVL = 0x40, -+ PCF50633_REG_DCDCSTAT = 0x41, -+ PCF50633_REG_LDOSTAT = 0x42, -+ PCF50633_REG_MBCC1 = 0x43, -+ PCF50633_REG_MBCC2 = 0x44, -+ PCF50633_REG_MBCC3 = 0x45, -+ PCF50633_REG_MBCC4 = 0x46, -+ PCF50633_REG_MBCC5 = 0x47, -+ PCF50633_REG_MBCC6 = 0x48, -+ PCF50633_REG_MBCC7 = 0x49, -+ PCF50633_REG_MBCC8 = 0x4a, -+ PCF50633_REG_MBCS1 = 0x4b, -+ PCF50633_REG_MBCS2 = 0x4c, -+ PCF50633_REG_MBCS3 = 0x4d, -+ PCF50633_REG_BBCCTL = 0x4e, -+ PCF50633_REG_ALMGAIN = 0x4f, -+ PCF50633_REG_ALMDATA = 0x50, -+ /* reserved */ -+ PCF50633_REG_ADCC3 = 0x52, -+ PCF50633_REG_ADCC2 = 0x53, -+ PCF50633_REG_ADCC1 = 0x54, -+ PCF50633_REG_ADCS1 = 0x55, -+ PCF50633_REG_ADCS2 = 0x56, -+ PCF50633_REG_ADCS3 = 0x57, -+ /* reserved */ -+ PCF50633_REG_RTCSC = 0x59, /* Second */ -+ PCF50633_REG_RTCMN = 0x5a, /* Minute */ -+ PCF50633_REG_RTCHR = 0x5b, /* Hour */ -+ PCF50633_REG_RTCWD = 0x5c, /* Weekday */ -+ PCF50633_REG_RTCDT = 0x5d, /* Day */ -+ PCF50633_REG_RTCMT = 0x5e, /* Month */ -+ PCF50633_REG_RTCYR = 0x5f, /* Year */ -+ PCF50633_REG_RTCSCA = 0x60, /* Alarm Second */ -+ PCF50633_REG_RTCMNA = 0x61, /* Alarm Minute */ -+ PCF50633_REG_RTCHRA = 0x62, /* Alarm Hour */ -+ PCF50633_REG_RTCWDA = 0x63, /* Alarm Weekday */ -+ PCF50633_REG_RTCDTA = 0x64, /* Alarm Day */ -+ PCF50633_REG_RTCMTA = 0x65, /* Alarm Month */ -+ PCF50633_REG_RTCYRA = 0x66, /* Alarm Year */ -+ -+ PCF50633_REG_MEMBYTE0 = 0x67, -+ PCF50633_REG_MEMBYTE1 = 0x68, -+ PCF50633_REG_MEMBYTE2 = 0x69, -+ PCF50633_REG_MEMBYTE3 = 0x6a, -+ PCF50633_REG_MEMBYTE4 = 0x6b, -+ PCF50633_REG_MEMBYTE5 = 0x6c, -+ PCF50633_REG_MEMBYTE6 = 0x6d, -+ PCF50633_REG_MEMBYTE7 = 0x6e, -+ /* reserved */ -+ PCF50633_REG_DCDCPFM = 0x84, -+ __NUM_PCF50633_REGS -+}; -+ -+enum pcf50633_reg_int1 { -+ PCF50633_INT1_ADPINS = 0x01, /* Adapter inserted */ -+ PCF50633_INT1_ADPREM = 0x02, /* Adapter removed */ -+ PCF50633_INT1_USBINS = 0x04, /* USB inserted */ -+ PCF50633_INT1_USBREM = 0x08, /* USB removed */ -+ /* reserved */ -+ PCF50633_INT1_ALARM = 0x40, /* RTC alarm time is reached */ -+ PCF50633_INT1_SECOND = 0x80, /* RTC periodic second interrupt */ -+}; -+ -+enum pcf50633_reg_int2 { -+ PCF50633_INT2_ONKEYR = 0x01, /* ONKEY rising edge */ -+ PCF50633_INT2_ONKEYF = 0x02, /* ONKEY falling edge */ -+ PCF50633_INT2_EXTON1R = 0x04, /* EXTON1 rising edge */ -+ PCF50633_INT2_EXTON1F = 0x08, /* EXTON1 falling edge */ -+ PCF50633_INT2_EXTON2R = 0x10, /* EXTON2 rising edge */ -+ PCF50633_INT2_EXTON2F = 0x20, /* EXTON2 falling edge */ -+ PCF50633_INT2_EXTON3R = 0x40, /* EXTON3 rising edge */ -+ PCF50633_INT2_EXTON3F = 0x80, /* EXTON3 falling edge */ -+}; -+ -+enum pcf50633_reg_int3 { -+ PCF50633_INT3_BATFULL = 0x01, /* Battery full */ -+ PCF50633_INT3_CHGHALT = 0x02, /* Charger halt */ -+ PCF50633_INT3_THLIMON = 0x04, -+ PCF50633_INT3_THLIMOFF = 0x08, -+ PCF50633_INT3_USBLIMON = 0x10, -+ PCF50633_INT3_USBLIMOFF = 0x20, -+ PCF50633_INT3_ADCRDY = 0x40, /* ADC conversion finished */ -+ PCF50633_INT3_ONKEY1S = 0x80, /* ONKEY pressed 1 second */ -+}; -+ -+enum pcf50633_reg_int4 { -+ PCF50633_INT4_LOWSYS = 0x01, -+ PCF50633_INT4_LOWBAT = 0x02, -+ PCF50633_INT4_HIGHTMP = 0x04, -+ PCF50633_INT4_AUTOPWRFAIL = 0x08, -+ PCF50633_INT4_DWN1PWRFAIL = 0x10, -+ PCF50633_INT4_DWN2PWRFAIL = 0x20, -+ PCF50633_INT4_LEDPWRFAIL = 0x40, -+ PCF50633_INT4_LEDOVP = 0x80, -+}; -+ -+enum pcf50633_reg_int5 { -+ PCF50633_INT4_LDO1PWRFAIL = 0x01, -+ PCF50633_INT4_LDO2PWRFAIL = 0x02, -+ PCF50633_INT4_LDO3PWRFAIL = 0x04, -+ PCF50633_INT4_LDO4PWRFAIL = 0x08, -+ PCF50633_INT4_LDO5PWRFAIL = 0x10, -+ PCF50633_INT4_LDO6PWRFAIL = 0x20, -+ PCF50633_INT4_HCLDOPWRFAIL = 0x40, -+ PCF50633_INT4_HCLDOOVL = 0x80, -+}; -+ -+enum pcf50633_reg_oocwake { -+ PCF50633_OOCWAKE_ONKEY = 0x01, -+ PCF50633_OOCWAKE_EXTON1 = 0x02, -+ PCF50633_OOCWAKE_EXTON2 = 0x04, -+ PCF50633_OOCWAKE_EXTON3 = 0x08, -+ PCF50633_OOCWAKE_RTC = 0x10, -+ /* reserved */ -+ PCF50633_OOCWAKE_USB = 0x40, -+ PCF50633_OOCWAKE_ADP = 0x80, -+}; -+ -+enum pcf50633_reg_mbcc1 { -+ PCF50633_MBCC1_CHGENA = 0x01, /* Charger enable */ -+ PCF50633_MBCC1_AUTOSTOP = 0x02, -+ PCF50633_MBCC1_AUTORES = 0x04, /* automatic resume */ -+ PCF50633_MBCC1_RESUME = 0x08, /* explicit resume cmd */ -+ PCF50633_MBCC1_RESTART = 0x10, /* restart charging */ -+ PCF50633_MBCC1_PREWDTIME_60M = 0x20, /* max. precharging time */ -+ PCF50633_MBCC1_WDTIME_1H = 0x00, -+ PCF50633_MBCC1_WDTIME_2H = 0x40, -+ PCF50633_MBCC1_WDTIME_4H = 0x80, -+ PCF50633_MBCC1_WDTIME_6H = 0xc0, -+}; -+#define PCF50633_MBCC1_WDTIME_MASK 0xc0 -+ -+enum pcf50633_reg_mbcc2 { -+ PCF50633_MBCC2_VBATCOND_2V7 = 0x00, -+ PCF50633_MBCC2_VBATCOND_2V85 = 0x01, -+ PCF50633_MBCC2_VBATCOND_3V = 0x02, -+ PCF50633_MBCC2_VBATCOND_3V15 = 0x03, -+ PCF50633_MBCC2_VMAX_4V = 0x00, -+ PCF50633_MBCC2_VMAX_4V20 = 0x28, -+ PCF50633_MBCC2_VRESDEBTIME_64S = 0x80, /* debounce time (32/64sec) */ -+}; -+#define PCF50633_MBCC2_VBATCOND_MASK 0x03 -+#define PCF50633_MBCC2_VMAX_MASK 0x3c -+ -+#define PCF50633_OOCSTAT_ONKEY 0x01 -+ -+/* this is to be provided by the board implementation */ -+extern const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS]; -+ -+void pcf50633_reg_write(u_int8_t reg, u_int8_t val); -+ -+u_int8_t pcf50633_reg_read(u_int8_t reg); -+ -+void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val); -+void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits); -+ -+void pcf50633_init(void); -+void pcf50633_usb_maxcurrent(unsigned int ma); -+ -+#endif /* _PCF50633_H */ -+ -Index: u-boot/drivers/pcf50633.c -=================================================================== ---- /dev/null -+++ u-boot/drivers/pcf50633.c -@@ -0,0 +1,142 @@ -+#include <common.h> -+ -+#ifdef CONFIG_DRIVER_PCF50633 -+ -+#include <i2c.h> -+#include <pcf50633.h> -+#include <asm/atomic.h> -+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -+ -+#define PCF50633_I2C_ADDR 0x73 -+ -+void __pcf50633_reg_write(u_int8_t reg, u_int8_t val) -+{ -+ i2c_write(PCF50633_I2C_ADDR, reg, 1, &val, 1); -+} -+ -+u_int8_t __pcf50633_reg_read(u_int8_t reg) -+{ -+ u_int8_t tmp; -+ i2c_read(PCF50633_I2C_ADDR, reg, 1, &tmp, 1); -+ return tmp; -+} -+ -+void pcf50633_reg_write(u_int8_t reg, u_int8_t val) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ __pcf50633_reg_write(reg, val); -+ local_irq_restore(flags); -+} -+ -+u_int8_t pcf50633_reg_read(u_int8_t reg) -+{ -+ unsigned long flags; -+ u_int8_t tmp; -+ -+ local_irq_save(flags); -+ tmp = __pcf50633_reg_read(reg); -+ local_irq_restore(flags); -+ -+ return tmp; -+} -+ -+void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val) -+{ -+ unsigned long flags; -+ u_int8_t tmp; -+ -+ local_irq_save(flags); -+ tmp = __pcf50633_reg_read(reg); -+ __pcf50633_reg_write(reg, (val & mask) | (tmp & ~mask)); -+ local_irq_restore(flags); -+} -+ -+void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits) -+{ -+ unsigned long flags; -+ u_int8_t tmp; -+ -+ local_irq_save(flags); -+ tmp = pcf50633_reg_read(reg); -+ pcf50633_reg_write(reg, (tmp & ~bits)); -+ local_irq_restore(flags); -+} -+ -+static const u_int8_t regs_invalid[] = { -+ PCF50633_REG_VERSION, -+ PCF50633_REG_VARIANT, -+ PCF50633_REG_OOCSHDWN, -+ PCF50633_REG_INT1, -+ PCF50633_REG_INT2, -+ PCF50633_REG_INT3, -+ PCF50633_REG_INT4, -+ PCF50633_REG_INT5, -+ PCF50633_REG_OOCSTAT, -+ 0x2c, -+ PCF50633_REG_DCDCSTAT, -+ PCF50633_REG_LDOSTAT, -+ PCF50633_REG_MBCS1, -+ PCF50633_REG_MBCS2, -+ PCF50633_REG_MBCS3, -+ PCF50633_REG_ALMDATA, -+ 0x51, -+ /* 0x55 ... 0x6e: don't write */ -+ /* 0x6f ... 0x83: reserved */ -+}; -+#define PCF50633_LAST_REG 0x55 -+ -+static int reg_is_invalid(u_int8_t reg) -+{ -+ int i; -+ -+ /* all registers above 0x55 (ADCS1) except 0x84 */ -+ if (reg == PCF50633_REG_DCDCPFM) -+ return 0; -+ if (reg >= 0x55) -+ return 1; -+ -+ for (i = 0; i < ARRAY_SIZE(regs_invalid); i++) { -+ if (regs_invalid[i] > reg) -+ return 0; -+ if (regs_invalid[i] == reg) -+ return 1; -+ } -+ -+ return 0; -+} -+ -+ -+/* initialize PCF50633 register set */ -+void pcf50633_init(void) -+{ -+ unsigned long flags; -+ u_int8_t i; -+ -+ local_irq_save(flags); -+ for (i = 0; i < PCF50633_LAST_REG; i++) { -+ if (reg_is_invalid(i)) -+ continue; -+ __pcf50633_reg_write(i, pcf50633_initial_regs[i]); -+ } -+ local_irq_restore(flags); -+} -+ -+void pcf50633_usb_maxcurrent(unsigned int ma) -+{ -+ u_int8_t val; -+ -+ if (ma < 100) -+ val = 0x03; -+ else if (ma < 500) -+ val = 0x00; -+ else if (ma < 1000) -+ val = 0x01; -+ else -+ val = 0x02; -+ -+ return pcf50633_reg_set_bit_mask(PCF50633_REG_MBCC7, 0x03, val); -+} -+ -+#endif /* CONFIG DRIVER_PCF50633 */ -Index: u-boot/board/neo1973/common/lowlevel_init.S -=================================================================== ---- u-boot.orig/board/neo1973/common/lowlevel_init.S -+++ u-boot/board/neo1973/common/lowlevel_init.S -@@ -49,7 +49,7 @@ - #define WAIT (0x1<<2) - #define UBLB (0x1<<3) - --#define B1_BWSCON (DW32) -+#define B1_BWSCON (DW16 + WAIT + UBLB) - #define B2_BWSCON (DW16) - #define B3_BWSCON (DW16 + WAIT + UBLB) - #define B4_BWSCON (DW16) -@@ -68,9 +68,9 @@ - - /* BANK1CON */ - #define B1_Tacs 0x0 /* 0clk */ --#define B1_Tcos 0x0 /* 0clk */ --#define B1_Tacc 0x7 /* 14clk */ --#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tcos 0x1 /* 1clk */ -+#define B1_Tacc 0x4 /* 4clk */ -+#define B1_Tcoh 0x1 /* 1clk */ - #define B1_Tah 0x0 /* 0clk */ - #define B1_Tacp 0x0 - #define B1_PMC 0x0 -@@ -112,7 +112,7 @@ - #if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) - #define B6_SCAN 0x1 /* 9bit */ - #elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ -- defined(CONFIG_ARCH_GTA01B_v4) -+ defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) - #define B6_SCAN 0x2 /* 10bit */ - #endif - -@@ -165,6 +165,18 @@ - str r1, [r0] - #endif - -+#if defined(CONFIG_ARCH_GTA02_v1) -+ /* enable KEEPACT to make sure PMU keeps us alive */ -+ ldr r0, =0x56000000 /* GPJ base */ -+ ldr r1, [r0, #0xd0] /* GPJCON */ -+ orr r1, r1, #(1 << 6) -+ str r1, [r0, #0xd0] -+ -+ ldr r1, [r0, #0xd4] /* GPJDAT */ -+ orr r1, r1, #(1 << 3) -+ str r1, [r0, #0xd4] -+#endif -+ - /* everything is fine now */ - mov pc, lr - -Index: u-boot/board/neo1973/gta02/pcf50633.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta02/pcf50633.c -@@ -0,0 +1,91 @@ -+ -+#include <common.h> -+#include <pcf50633.h> -+ -+/* initial register set for PCF50633 in Neo1973 GTA02 devices */ -+const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS] = { -+ /* gap */ -+ [PCF50633_REG_INT1M] = PCF50633_INT1_SECOND, -+ [PCF50633_REG_INT2M] = PCF50633_INT2_EXTON3F | -+ PCF50633_INT2_EXTON3R | -+ PCF50633_INT2_EXTON2F | -+ PCF50633_INT2_EXTON2R | -+ PCF50633_INT2_EXTON1R | -+ PCF50633_INT2_EXTON1F, -+ [PCF50633_REG_INT3M] = PCF50633_INT3_ADCRDY, -+ [PCF50633_REG_INT4M] = 0x00, -+ [PCF50633_REG_INT5M] = 0x00, -+ -+ [PCF50633_REG_OOCWAKE] = 0xd3, /* wake from ONKEY,EXTON!,RTC,USB,ADP */ -+ [PCF50633_REG_OOCTIM1] = 0xaa, /* debounce 14ms everything */ -+ [PCF50633_REG_OOCTIM2] = 0x4a, -+ [PCF50633_REG_OOCMODE] = 0x55, -+ [PCF50633_REG_OOCCTL] = 0x44, -+ -+ [PCF50633_REG_GPIOCTL] = 0x01, /* only GPIO1 is input */ -+ [PCF50633_REG_GPIO2CFG] = 0x00, -+ [PCF50633_REG_GPIO3CFG] = 0x00, -+ [PCF50633_REG_GPOCFG] = 0x00, -+ -+ [PCF50633_REG_SVMCTL] = 0x08, /* 3.10V SYS voltage thresh. */ -+ [PCF50633_REG_BVMCTL] = 0x02, /* 2.80V BAT voltage thresh. */ -+ -+ [PCF50633_REG_STBYCTL1] = 0x00, -+ [PCF50633_REG_STBYCTL2] = 0x00, -+ -+ [PCF50633_REG_DEBPF1] = 0xff, -+ [PCF50633_REG_DEBPF2] = 0xff, -+ [PCF50633_REG_DEBPF2] = 0x3f, -+ -+ [PCF50633_REG_AUTOOUT] = 0x6b, /* 3.300V */ -+ [PCF50633_REG_AUTOENA] = 0x01, /* always on */ -+ [PCF50633_REG_AUTOCTL] = 0x00, /* automatic up/down operation */ -+ [PCF50633_REG_AUTOMXC] = 0x0a, /* 400mA at startup FIXME */ -+ -+ [PCF50633_REG_DOWN1OUT] = 0x1b, /* 1.3V (0x1b * .025V + 0.625V) */ -+ [PCF50633_REG_DOWN1ENA] = 0x02, /* enabled if GPIO1 = HIGH */ -+ [PCF50633_REG_DOWN1CTL] = 0x00, /* no DVM */ -+ [PCF50633_REG_DOWN1MXC] = 0x22, /* limit to 510mA at startup */ -+ -+ [PCF50633_REG_DOWN2OUT] = 0x2f, /* 1.8V (0x2f * .025V + 0.625V) */ -+ [PCF50633_REG_DOWN2ENA] = 0x02, /* enabled if GPIO1 = HIGH */ -+ [PCF50633_REG_DOWN2CTL] = 0x00, /* no DVM */ -+ [PCF50633_REG_DOWN2MXC] = 0x22, /* limit to 510mA at startup */ -+ -+ [PCF50633_REG_MEMLDOOUT] = 0x00, -+ [PCF50633_REG_MEMLDOENA] = 0x00, -+ -+ [PCF50633_REG_LEDOUT] = 0x2f, /* full backlight power */ -+ [PCF50633_REG_LEDENA] = 0x02, /* enabled if GPIO1 = HIGH */ -+ [PCF50633_REG_LEDCTL] = 0x05, /* ovp enabled, ocp 500mA */ -+ [PCF50633_REG_LEDDIM] = 0x20, /* dimming curve */ -+ -+ [PCF50633_REG_LDO1OUT] = 0x04, /* 1.3V (4 * 0.1V + 0.9V) */ -+ [PCF50633_REG_LDO1ENA] = 0x01, /* always on */ -+ -+ [PCF50633_REG_LDO2OUT] = 0x18, /* 3.3V (24 * 0.1V + 0.9V) */ -+ [PCF50633_REG_LDO2ENA] = 0x02, /* enabled if GPIO1 = HIGH */ -+ -+ [PCF50633_REG_LDO3OUT] = 0x15, /* 3.0V (21 * 0.1V + 0.9V) */ -+ [PCF50633_REG_LDO3ENA] = 0x02, /* enabled if GPIO1 = HIGH */ -+ -+ [PCF50633_REG_LDO4ENA] = 0x00, -+ [PCF50633_REG_LDO5ENA] = 0x00, -+ [PCF50633_REG_LDO6ENA] = 0x00, -+ -+ [PCF50633_REG_HCLDOOUT] = 0x18, /* 3.3V (24 * 0.1V + 0.9V) */ -+ [PCF50633_REG_HCLDOENA] = 0x00, /* off by default*/ -+ -+ [PCF50633_REG_DCDCPFM] = 0x00, /* off by default*/ -+ -+ [PCF50633_REG_MBCC1] = 0xe6, -+ [PCF50633_REG_MBCC2] = 0x28, /* Vbatconid=2.7V, Vmax=4.20V */ -+ [PCF50633_REG_MBCC3] = 0x19, /* 25/255 == 98mA pre-charge */ -+ [PCF50633_REG_MBCC4] = 0xff, /* 255/255 == 1A adapter fast */ -+ [PCF50633_REG_MBCC5] = 0x7f, /* 127/255 == 500mA usb fast */ -+ [PCF50633_REG_MBCC6] = 0x00, /* cutoff current 1/32 * Ichg */ -+ [PCF50633_REG_MBCC7] = 0x00, /* 1.6A max bat curr, USB 100mA */ -+ [PCF50633_REG_MBCC8] = 0x00, -+ -+ [PCF50633_REG_BBCCTL] = 0x19, /* 3V, 200uA, on */ -+}; -Index: u-boot/board/neo1973/gta02/config.mk -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/gta02/config.mk -@@ -0,0 +1,32 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+# GTA01v3 has 1 bank of 64 MB SDRAM -+# GTA01v4 has 1 bank of 64 MB SDRAM -+# -+# 3000'0000 to 3400'0000 -+# we load ourself to 33F8'0000 -+# -+# GTA01Bv2 or later has 1 bank of 128 MB SDRAM -+# -+# 3000'0000 to 3800'0000 -+# we load ourself to 37F8'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# download area is 3200'0000 or 3300'0000 -+ -+CONFIG_USB_DFU_VENDOR=0x1457 -+CONFIG_USB_DFU_PRODUCT=0x5119 -+ -+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -+ -+TEXT_BASE = 0x33F80000 -Index: u-boot/drivers/smedia3362.c -=================================================================== ---- /dev/null -+++ u-boot/drivers/smedia3362.c -@@ -0,0 +1,125 @@ -+/* -+ * (C) Copyright 2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+#if defined(CONFIG_VIDEO_GLAMO3362) -+ -+#include <video_fb.h> -+#include "videomodes.h" -+#include <s3c2410.h> -+#include "smedia3362.h" -+ -+/* -+ * Export Graphic Device -+ */ -+GraphicDevice smi; -+ -+ -+struct glamo_script { -+ u_int16_t reg; -+ u_int16_t val; -+} __attribute__((packed)); -+ -+/* from 'initial glamo 3365 script' */ -+static struct glamo_script gl3362_init_script[] = { -+ /* clock */ -+ { GLAMO_REG_CLOCK_MEMORY, 0x300a }, -+ { GLAMO_REG_CLOCK_LCD, 0x10aa }, -+ { GLAMO_REG_CLOCK_MMC, 0x100a }, -+ { GLAMO_REG_CLOCK_ISP, 0x32aa }, -+ { GLAMO_REG_CLOCK_JPEG, 0x100a }, -+ { GLAMO_REG_CLOCK_3D, 0x302a }, -+ { GLAMO_REG_CLOCK_2D, 0x302a }, -+ //{ GLAMO_REG_CLOCK_RISC1, 0x1aaa }, -+ //{ GLAMO_REG_CLOCK_RISC2, 0x002a }, -+ { GLAMO_REG_CLOCK_MPEG, 0x3aaa }, -+ { GLAMO_REG_CLOCK_MPROC, 0x12aa }, -+ { 0xfffe, 5 }, -+ { GLAMO_REG_CLOCK_HOST, 0x000d }, -+ { GLAMO_REG_CLOCK_MEMORY, 0x000a }I, -+ { GLAMO_REG_CLOCK_LCD, 0x00ee }, -+ { GLAMO_REG_CLOCK_MMC, 0x000a }, -+ { GLAMO_REG_CLOCK_ISP, 0x02aa }, -+ { GLAMO_REG_CLOCK_JPEG, 0x000a }, -+ { GLAMO_REG_CLOCK_3D, 0x002a }, -+ { GLAMO_REG_CLOCK_2D, 0x002a }, -+ //{ GLAMO_REG_CLOCK_RISC1, 0x0aaa }, -+ //{ GLAMO_REG_CLOCK_RISC2, 0x002a }, -+ { GLAMO_REG_CLOCK_MPEG, 0x0aaa }, -+ { GLAMO_REG_CLOCK_MPROC, 0x02aa }, -+ { 0xfffe, 5 }, -+ { GLAMO_REG_PLL_GEN1, 0x061a }, /* PLL1=50MHz, OSCI=32kHz */ -+ { GLAMO_REG_PLL_GEN3, 0x09c3 }, /* PLL2=80MHz, OSCI=32kHz */ -+ { 0xfffe, 5 }, -+ { GLAMO_REG_CLOCK_GEN5_1, 0x18ff }, -+ { GLAMO_REG_CLOCK_GEN5_2, 0x051f }, -+ { GLAMO_REG_CLOCK_GEN6, 0x2000 }, -+ { GLAMO_REG_CLOCK_GEN7, 0x0105 }, -+ { GLAMO_REG_CLOCK_GEN8, 0x0100 }, -+ { GLAMO_REG_CLOCK_GEN10, 0x0017 }, -+ { GLAMO_REG_CLOCK_GEN11, 0x0017 }, -+ -+ /* hostbus interface */ -+ { GLAMO_REG_HOSTBUS(1), 0x0e00 }, -+ { GLAMO_REG_HOSTBUS(2), 0x07ff }, -+ { GLAMO_REG_HOSTBUS(4), 0x0080 }, -+ { GLAMO_REG_HOSTBUS(5), 0x0244 }, -+ { GLAMO_REG_HOSTBUS(6), 0x0600 }, -+ { GLAMO_REG_HOSTBUS(12), 0xf00e }, -+ -+ /* memory */ -+ { GLAMO_REG_MEM_TYPE, 0x0874 }, /* VRAM 8Mbyte */ -+ { GLAMO_REG_MEM_GEN, 0xafaf }, -+ { GLAMO_REG_MEM_TIMING(1), 0x0108 }, -+ { GLAMO_REG_MEM_TIMING(2), 0x0010 }, -+ { GLAMO_REG_MEM_TIMING(3), 0x0000 }, -+ { GLAMO_REG_MEM_TIMING(4), 0x0000 }, -+ { GLAMO_REG_MEM_TIMING(5), 0x0000 }, -+ { GLAMO_REG_MEM_TIMING(6), 0x0000 }, -+ { GLAMO_REG_MEM_TIMING(7), 0x0000 }, -+ { GLAMO_REG_MEM_TIMING(8), 0x1002 }, -+ { GLAMO_REG_MEM_TIMING(9), 0x6006 }, -+ { GLAMO_REG_MEM_TIMING(10), 0x00ff }, -+ { GLAMO_REG_MEM_TIMING(11), 0x0001 }, -+ { GLAMO_REG_MEM_POWER1, 0x0020 }, -+ { GLAMO_REG_MEM_POWRE2, 0x0000 }, -+ { GLAMO_REG_MEM_DRAM1, 0x0000 }, -+ { 0xfffe, 1 }, -+ { GLAMO_REG_MEM_DRAM1, 0xc100 }, -+ { GLAMO_REG_MEM_DRAM2, 0x01d6 }, -+}; -+ -+static int glamo3362_init(void) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(gl3362_init_script); i++) { -+ struct glamo_reg *reg = gl3362_init_script[i]; -+ -+ if (reg->reg == 0xfffe) -+ delay(reg->val); -+ else -+ gl3362_reg_write(reg->reg, reg->val); -+ } -+ /* FIXME */ -+} -+ -+#endif /* CONFIG_VIDEO_GLAMO3362 */ -Index: u-boot/drivers/Makefile -=================================================================== ---- u-boot.orig/drivers/Makefile -+++ u-boot/drivers/Makefile -@@ -50,7 +50,7 @@ - usbdcore.o usbdfu.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ - videomodes.o w83c553f.o \ - ks8695eth.o \ -- pcf50606.o \ -+ pcf50606.o pcf50633.o \ - pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ - rpx_pcmcia.o \ - fsl_i2c.o s3c2410_fb.o -Index: u-boot/common/cmd_nand.c -=================================================================== ---- u-boot.orig/common/cmd_nand.c -+++ u-boot/common/cmd_nand.c -@@ -208,8 +208,10 @@ - putc('\n'); - for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) { - if (nand_info[i].name) -- printf("Device %d: %s, sector size %lu KiB\n", -+ printf("Device %d: %s, page size %lu, " -+ "sector size %lu KiB\n", - i, nand_info[i].name, -+ nand_info[i].oobblock, - nand_info[i].erasesize >> 10); - } - return 0; -Index: u-boot/drivers/nand/nand_ids.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_ids.c -+++ u-boot/drivers/nand/nand_ids.c -@@ -67,7 +67,7 @@ - - {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, - -- {"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, -+ //{"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, - - /* These are the new chips with large page size. The pagesize - * and the erasesize is determined from the extended id bytes -Index: u-boot/board/neo1973/common/udc.c -=================================================================== ---- u-boot.orig/board/neo1973/common/udc.c -+++ u-boot/board/neo1973/common/udc.c -@@ -3,6 +3,7 @@ - #include <usbdcore.h> - #include <s3c2410.h> - #include <pcf50606.h> -+#include <pcf50633.h> - - void udc_ctrl(enum usbd_event event, int param) - { -@@ -23,6 +24,11 @@ - defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ - defined(CONFIG_ARCH_GTA01B_v4) - pcf50606_charge_autofast(param); -+#elif defined(CONFIG_ARCH_GTA02_v1) -+ if (param) -+ pcf50633_usb_maxcurrent(500); -+ else -+ pcf50633_usb_maxcurrent(0); - #endif - break; - default: diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-hxd8.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-hxd8.patch deleted file mode 100644 index f85fdea836..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-hxd8.patch +++ /dev/null @@ -1,1169 +0,0 @@ -Patch to add HXD8 support - -Index: u-boot/Makefile -=================================================================== ---- u-boot.orig/Makefile -+++ u-boot/Makefile -@@ -2026,6 +2026,9 @@ - qt2410_config : unconfig - @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 - -+hxd8_config : unconfig -+ @$(MKCONFIG) $(@:_config=) arm arm920t hxd8 NULL s3c24x0 -+ - scb9328_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx - -Index: u-boot/board/hxd8/Makefile -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/Makefile -@@ -0,0 +1,65 @@ -+# -+# (C) Copyright 2000-2006 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).a -+ -+COBJS := hxd8.o udc.o pcf50606.o -+SOBJS := lowlevel_init.o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+all: $(LIB) lowevel_foo.bin -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -+ -+lowlevel_foo.o: lowlevel_foo.S -+ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ -+ -o lowlevel_foo.o lowlevel_foo.S -+ -+lowlevel_foo: lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds -+ $(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ -+ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo -+ -+lowevel_foo.bin: lowlevel_foo -+ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ -+ lowlevel_foo lowlevel_foo.bin -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### -Index: u-boot/board/hxd8/hxd8.c -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/hxd8.c -@@ -0,0 +1,189 @@ -+/* -+ * (C) Copyright 2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <video_fb.h> -+#include <nand.h> -+#include <pcf50606.h> -+#include <s3c2440.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#define FCLK_SPEED 1 -+ -+#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ -+#define M_MDIV 0xC3 -+#define M_PDIV 0x4 -+#define M_SDIV 0x1 -+#elif FCLK_SPEED==1 -+#if 0 -+#define M_MDIV 0x6e /* Fout = 399.65MHz */ -+#define M_PDIV 0x3 -+#define M_SDIV 0x1 -+#else -+#define M_MDIV 0x61 /* Fout = 296.35MHz due to wrong PLL capacitors */ -+#define M_PDIV 0x1 -+#define M_SDIV 0x2 -+#endif -+#endif -+ -+#define USB_CLOCK 1 -+ -+#if USB_CLOCK==0 -+#define U_M_MDIV 0xA1 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x1 -+#elif USB_CLOCK==1 -+#define U_M_MDIV 0x3c -+#define U_M_PDIV 0x4 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x005E0FFE; -+ gpio->GPADAT = 0x0001C000; -+ gpio->GPBCON = 0x00045542; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPCCON = 0xAAAA02A9; -+ gpio->GPCUP = 0x0000FFFF; -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ gpio->GPFCON = 0x0000AAA9; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPGCON = 0x027D0316; -+ gpio->GPGUP = 0x0000FFFF; -+ gpio->GPHCON = 0x0014AAAA; -+ gpio->GPHUP = 0x000007FF; -+ gpio->GPJCON = 0x00000000; -+ -+ /* USB CHG enable */ -+ gpio->GPGDAT |= ( 1 << 11); -+#if 0 -+ /* USB Device Part */ -+ /*GPGCON is reset for USB Device */ -+ gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */ -+ gpio->GPGUP = gpio->GPGUP | ( 1 << 12); /* Pull up disable */ -+ -+ gpio->GPGDAT |= ( 1 << 12); -+ gpio->GPGDAT &= ~( 1 << 12); -+ udelay(20000); -+ gpio->GPGDAT |= ( 1 << 12); -+#endif -+ -+ /* arch number of SMDK2440-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_HXD8; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+void board_video_init(GraphicDevice *pGD) -+{ -+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); -+ -+ lcd->LCDCON1 = 0x0000057b; -+ lcd->LCDCON2 = 0x0143c049; -+ lcd->LCDCON3 = 0x0009df01; -+ lcd->LCDCON4 = 0x00000028; -+ lcd->LCDCON5 = 0x00000b08; -+ -+ lcd->TPAL = 0x01202020; -+ -+ //lcd->LCDCON5 |= (0x01 << 3); -+} -+ -+int board_late_init(void) -+{ -+ /* Initialize the Power Management Unit with a safe register set */ -+ pcf50606_init(); -+ -+ return 0; -+} -+ -+int dram_init(void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -+ -+u_int32_t get_board_rev(void) -+{ -+ return 0x00000110; -+} -+ -+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. -+ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 -+ images: 640*480*2*2 = 1228800 < 1245184. */ -+ -+unsigned int dynpart_size[] = { -+ CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3fd00000, 0 }; -+char *dynpart_names[] = { -+ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; -+ -Index: u-boot/board/hxd8/lowlevel_init.S -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/lowlevel_init.S -@@ -0,0 +1,171 @@ -+/* -+ * Memory Setup stuff - taken from blob memsetup.S -+ * -+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and -+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) -+ * -+ * Modified for the FIC HXD8 by Harald Welte <laforge@openmoko.org> -+ * (C) Copyright 2007 by OpenMoko, Inc. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 /* 3clk */ -+#define B6_SCAN 0x2 /* 10bit */ -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x1 /* 9bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x1 /* 3clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ ldr r0, =SMRDATA -+ ldr r1, _TEXT_BASE -+ sub r0, r0, r1 -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* setup asynchronous bus mode */ -+ mrc p15, 0, r1 ,c1 ,c0, 0 -+ orr r1, r1, #0xc0000000 -+ mcr p15, 0, r1, c1, c0, 0 -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0x32 -+ .word 0x30 -+ .word 0x30 -Index: u-boot/include/configs/hxd8.h -=================================================================== ---- /dev/null -+++ u-boot/include/configs/hxd8.h -@@ -0,0 +1,277 @@ -+/* -+ * (C) Copyright 2007 OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * Configuation settings for the FIC HXD8 -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* we want to be able to start u-boot directly from within NAND flash */ -+#define CONFIG_LL_INIT_NAND_ONLY -+#define CONFIG_S3C2410_NAND_BOOT 1 -+#define CONFIG_S3C2410_NAND_SKIP_BAD 1 -+ -+#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2440 SoC */ -+#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2440 Board */ -+#define CONFIG_HXD8 1 /* on a FIC HXD8 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 16934400/* the HXD8 has this input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 2048*1024) -+ /* >> CFG_VIDEO_LOGO_MAX_SIZE */ -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on HXD8 */ -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS (\ -+ CFG_CMD_BDI | \ -+ CFG_CMD_LOADS | \ -+ CFG_CMD_LAODB | \ -+ CFG_CMD_IMI | \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_MEMORY | \ -+ CFG_CMD_ENV | \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_BOOTD | \ -+ CFG_CMD_CONSOLE | \ -+ /* CFG_CMD_BMP | */ \ -+ CFG_CMD_ASKENV | \ -+ CFG_CMD_RUN | \ -+ CFG_CMD_ECHO | \ -+ CFG_CMD_I2C | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_IMMAP | \ -+ CFG_CMD_DATE | \ -+ CFG_CMD_AUTOSCRIPT | \ -+ CFG_CMD_BSP | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_MISC | \ -+ /* CFG_CMD_USB | */ \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_DIAG | \ -+ /* CFG_CMD_HWFLOW | */ \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_FAT | \ -+ CFG_CMD_EXT2 | \ -+ 0) -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "" -+#define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 3 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#define CFG_PROMPT "HXD8 # " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 64 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x33000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (512*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+#if 0 -+#define CONFIG_USB_OHCI 1 -+#endif -+ -+#if 1 -+#define CONFIG_USB_DEVICE 1 -+#define CONFIG_USB_TTY 1 -+#define CFG_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ -+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ -+#define CONFIG_USBD_PRODUCTID_CDCACM 0x511a /* CDC ACM */ -+#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" -+#define CONFIG_USBD_PRODUCT_NAME "HXD8 Bootloader " U_BOOT_VERSION -+#define CONFIG_USBD_DFU 1 -+#define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ -+#define CONFIG_USBD_DFU_INTERFACE 2 -+#endif -+#define CFG_CONSOLE_IS_IN_ENV 1 -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "usbtty=cdc_acm\0" \ -+ "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC2,115200 console=tty0 loglevel=8\0" \ -+ "" -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+/* No NOR flash in this device */ -+#define CFG_NO_FLASH 1 -+ -+#define CFG_ENV_SIZE 0x20000 /* 128k Total Size of Environment Sector */ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ -+#define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ -+ -+#define NAND_MAX_CHIPS 3 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE NAND_MAX_CHIPS -+#define CFG_NAND_BASE_LIST { CFG_NAND_BASE, CFG_NAND_BASE, CFG_NAND_BASE } -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+/* EXT2 driver */ -+#define CONFIG_EXT2 1 -+ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT -+ -+#if 1 -+/* JFFS2 driver */ -+#define CONFIG_JFFS2_CMDLINE 1 -+#define CONFIG_JFFS2_NAND 1 -+#define CONFIG_JFFS2_NAND_DEV 0 -+//#define CONFIG_JFFS2_NAND_OFF 0x634000 -+//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+#endif -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#endif -+ -+#define CONFIG_DRIVER_S3C24X0_I2C 1 -+#define CONFIG_HARD_I2C 1 -+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */ -+#define CFG_I2C_SLAVE 0x7f -+ -+/* we have a board_late_init() function */ -+#define BOARD_LATE_INIT 1 -+ -+#if 1 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_SPLASH_SCREEN -+#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ -+#define CONFIG_VIDEO_BMP_GZIP -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+#define CONFIG_UNZIP -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#define CONFIG_S3C2410_NAND_BBT 1 -+//#define CONFIG_S3C2410_NAND_HWECC 1 -+ -+#define CONFIG_DRIVER_PCF50606 1 -+ -+#define MTDIDS_DEFAULT "nand0=hxd8-nand" -+#define MTPARTS_DEFAULT "hxd8-nand:256k(u-boot),128k(u-boot_env),2M(kernel),640k(splash),0x3fd00000(jffs2)" -+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "hxd8-nand" -+#define CONFIG_NAND_DYNPART -+ -+#endif /* __CONFIG_H */ -Index: u-boot/board/hxd8/udc.c -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/udc.c -@@ -0,0 +1,30 @@ -+ -+#include <common.h> -+#include <usbdcore.h> -+#include <s3c2440.h> -+ -+#if defined(CONFIG_USB_DEVICE) -+ -+void udc_ctrl(enum usbd_event event, int param) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ switch (event) { -+ case UDC_CTRL_PULLUP_ENABLE: -+ if (param) -+ gpio->GPBDAT |= (1 << 9); /* GPB9 */ -+ else -+ gpio->GPBDAT &= ~(1 << 9); /* GPB9 */ -+ break; -+ case UDC_CTRL_500mA_ENABLE: -+ if (param) -+ gpio->GPADAT |= (1 << 0); /* GPA0 */ -+ else -+ gpio->GPADAT &= ~(1 << 0); /* GPA0 */ -+ break; -+ default: -+ break; -+ } -+} -+ -+#endif /* CONFIG_USB_DEVICE */ -Index: u-boot/board/hxd8/pcf50606.c -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/pcf50606.c -@@ -0,0 +1,67 @@ -+ -+#include <common.h> -+#include <pcf50606.h> -+ -+/* initial register set for PCF50606 in HXD8 devices */ -+const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = { -+ [PCF50606_REG_OOCS] = 0x00, -+ /* gap */ -+ [PCF50606_REG_INT1M] = PCF50606_INT1_SECOND, -+ [PCF50606_REG_INT2M] = PCF50606_INT2_CHGFOK | -+ PCF50606_INT2_CHGERR | -+ PCF50606_INT2_CHGFRDY | -+ PCF50606_INT2_CHGPROT | -+ PCF50606_INT2_CHGWD10S | -+ PCF50606_INT2_CHGWDEXP, -+ [PCF50606_REG_INT3M] = PCF50606_INT3_TSCPRES, -+ [PCF50606_REG_OOCC1] = PCF50606_OOCC1_RTCWAK | -+ PCF50606_OOCC1_CHGWAK & -+ PCF50606_OOCC1_EXTONWAK_NO_WAKEUP, -+ [PCF50606_REG_OOCC2] = PCF50606_OOCC2_ONKEYDB_14ms | -+ PCF50606_OOCC2_EXTONDB_14ms, -+ /* gap */ -+ [PCF50606_REG_PSSC] = 0x00, -+ [PCF50606_REG_PWROKM] = 0x00, -+ /* gap */ -+ [PCF50606_REG_DCDC1] = 0xf0, /* CORE_1V3: on */ -+ [PCF50606_REG_DCDC2] = 0x00, -+ [PCF50606_REG_DCDC3] = 0x00, -+ [PCF50606_REG_DCDC4] = 0x30, /* 1.25A */ -+ -+ [PCF50606_REG_DCDEC1] = 0xe8, /* IO1_3V3: off */ -+ [PCF50606_REG_DCDEC2] = 0x00, -+ -+ [PCF50606_REG_DCUDC1] = 0x08, /* RF_3V3: off */ -+ [PCF50606_REG_DCUDC2] = 0x30, /* 1.25A current limit */ -+ -+ [PCF50606_REG_IOREGC] = 0xf8, /* AUDIO_3V3: on */ -+ -+ [PCF50606_REG_D1REGC1] = 0xf8, /* RC_3V3: on */ -+ -+ [PCF50606_REG_D2REGC1] = 0x18, /* GPS_3V3: off */ -+ -+ [PCF50606_REG_D3REGC1] = 0xf8, /* IO2_3V3: off */ -+ -+ [PCF50606_REG_LPREGC1] = 0xf8, /* LCM_3V3: on */ -+ [PCF50606_REG_LPREGC2] = 0x00, -+ -+ [PCF50606_REG_MBCC1] = 0x00, /* charger unused */ -+ [PCF50606_REG_MBCC2] = 0x00, /* unlimited charging */ -+ [PCF50606_REG_MBCC3] = 0x1a, /* 0.2*Ifast, 4.20V */ -+ [PCF50606_REG_BBCC] = 0x1f, /* 400uA */ -+ [PCF50606_REG_ADCC1] = 0x00, -+ [PCF50606_REG_ADCC2] = 0x00, -+ /* gap */ -+ [PCF50606_REG_ACDC1] = 0x00, -+ [PCF50606_REG_BVMC] = PCF50606_BVMC_THRSHLD_3V3, -+ [PCF50606_REG_PWMC1] = 0x1f, /* clock: 512 DC: 15/16*/ -+ [PCF50606_REG_LEDC1] = 0x00, -+ [PCF50606_REG_LEDC2] = 0x00, -+ [PCF50606_REG_GPOC1] = 0x03, /* PWM ACTIVE */ -+ [PCF50606_REG_GPOC2] = 0x07, /* back light pull low */ -+ [PCF50606_REG_GPOC3] = 0x00, -+ [PCF50606_REG_GPOC4] = 0x00, -+ [PCF50606_REG_GPOC5] = 0x00, -+}; -+ -+ -Index: u-boot/board/hxd8/config.mk -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/config.mk -@@ -0,0 +1,27 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# FIC HXD8 board with S3C2440X (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+CONFIG_USB_DFU_VENDOR=0x1457 -+CONFIG_USB_DFU_PRODUCT=0x511a -+CONFIG_USB_DFU_REVISION=0x0100 -+ -+# -+# HXD81v011 or later has 1 bank of 128 MB SDRAM -+# -+# 3000'0000 to 3800'0000 -+# we load ourself to 37F8'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# download area is 3200'0000 or 3300'0000 -+ -+# FIXME: TEXT_BASE = 0x37F80000 -+TEXT_BASE = 0x33F80000 -Index: u-boot/board/hxd8/u-boot.lds -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/u-boot.lds -@@ -0,0 +1,58 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ cpu/arm920t/s3c24x0/nand_read.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/board/hxd8/lowlevel_foo.S -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/lowlevel_foo.S -@@ -0,0 +1,87 @@ -+ -+_start: -+ b reset -+undefvec: -+ b undefvec -+swivec: -+ b swivec -+pabtvec: -+ b pabtvec -+dabtvec: -+ b dabtvec -+rsvdvec: -+ b rsvdvec -+irqvec: -+ b irqvec -+fiqvec: -+ b fiqvec -+ -+reset: -+ /* -+ * set the cpu to SVC32 mode -+ */ -+ mrs r0,cpsr -+ bic r0,r0,#0x1f -+ orr r0,r0,#0xd3 -+ msr cpsr,r0 -+ -+/* turn off the watchdog */ -+#define pWTCON 0x53000000 -+#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ -+#define INTSUBMSK 0x4A00001C -+#define CLKDIVN 0x4C000014 /* clock divisor register */ -+#define CAMDIVN 0x4C000018 -+ -+ ldr r0, =pWTCON -+ mov r1, #0x0 -+ str r1, [r0] -+ -+ mov r1, #0xffffffff -+ ldr r0, =INTMSK -+ str r1, [r0] -+ ldr r1, =0x7ff -+ ldr r0, =INTSUBMSK -+ str r1, [r0] -+ -+ /* FCLK:HCLK:PCLK = 1:3:6 */ -+ ldr r0, =CAMDIVN -+ mov r1, #0 -+ str r1, [r0] -+ -+ /* FCLK:HCLK:PCLK = 1:3:6 */ -+ ldr r0, =CLKDIVN -+ mov r1, #7 -+ str r1, [r0] -+ -+ bl cpu_init_crit -+ ldr r0,=TEXT_BASE -+ mov pc, r0 -+ -+cpu_init_crit: -+ /* -+ * flush v4 I/D caches -+ */ -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ -+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ -+ -+ /* -+ * disable MMU stuff and caches -+ */ -+ mrc p15, 0, r0, c1, c0, 0 -+ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) -+ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) -+ orr r0, r0, #0x00000002 @ set bit 2 (A) Align -+ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache -+ mcr p15, 0, r0, c1, c0, 0 -+ -+ /* -+ * before relocating, we have to setup RAM timing -+ * because memory timing is board-dependend, you will -+ * find a lowlevel_init.S in your board directory. -+ */ -+ mov ip, lr -+ bl lowlevel_init -+ mov lr, ip -+ mov pc, lr -+ -Index: u-boot/board/hxd8/lowlevel_foo.lds -=================================================================== ---- /dev/null -+++ u-boot/board/hxd8/lowlevel_foo.lds -@@ -0,0 +1,56 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ lowlevel_foo.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/cpu/arm920t/s3c24x0/nand.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c -+++ u-boot/cpu/arm920t/s3c24x0/nand.c -@@ -83,6 +83,59 @@ - #define NFDATA __REGb(NF_BASE + oNFDATA) - #define NFSTAT __REGb(NF_BASE + oNFSTAT) - -+#if defined(CONFIG_HXD8) -+static int hxd8_nand_dev_ready(struct mtd_info *mtd) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ u_int32_t val = gpio->GPCDAT; -+ -+ switch (nand_curr_device) { -+ case 0: -+ return (NFSTAT & 0x01); -+ case 1: /* RnB 3 */ -+ return ((val>>6) & 0x01); -+ case 2: /* RnB 4 */ -+ return ((val>>7) & 0x01); -+ case 3: /* RnB 2 */ -+ return ((val>>5) & 0x01); -+ default: -+ return 0; -+ } -+} -+ -+/* 4G Nand flash chip select function */ -+static void hxd8_nand_select_chip(struct nand_chip *this, int chip) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ if (chip == 0) -+ gpio->GPGDAT &= ~(1 << 1); -+ else -+ gpio->GPGDAT |= (1 << 1); -+ -+ if (chip == 1) -+ gpio->GPADAT &= ~(1 << 15); -+ else -+ gpio->GPADAT |= (1 << 15); -+ -+ if (chip == 2) -+ gpio->GPADAT &= ~(1 << 16); -+ else -+ gpio->GPADAT |= (1 << 16); -+ -+ if (chip == 3) -+ gpio->GPADAT &= ~(1 << 14); -+ else -+ gpio->GPADAT |= (1 << 14); -+ -+ /* UGLY: ew don't have mtd_info pointer, but know that -+ * s3c24xx hwcontrol function does not use it for CLRNCE */ -+ if (chip == -1) -+ this->hwcontrol(NULL, NAND_CTL_CLRNCE); -+ else -+ this->hwcontrol(NULL, NAND_CTL_SETNCE); -+} -+#endif - - static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd) - { -@@ -251,6 +304,11 @@ - nand->eccmode = NAND_ECC_SOFT; - #endif - -+#if defined(CONFIG_HXD8) -+ nand->dev_ready = hxd8_nand_dev_ready; -+ nand->select_chip = hxd8_nand_select_chip; -+#endif -+ - #ifdef CONFIG_S3C2410_NAND_BBT - nand->options = NAND_USE_FLASH_BBT | NAND_DONT_CREATE_BBT; - #else diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-license.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-license.patch deleted file mode 100644 index 227a97e71a..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-license.patch +++ /dev/null @@ -1,712 +0,0 @@ -Index: u-boot/common/Makefile -=================================================================== ---- u-boot.orig/common/Makefile -+++ u-boot/common/Makefile -@@ -34,7 +34,7 @@ - cmd_dynenv.o cmd_eeprom.o cmd_elf.o cmd_ext2.o \ - cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \ - cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \ -- cmd_load.o cmd_log.o \ -+ cmd_license.o cmd_load.o cmd_log.o \ - cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \ - cmd_nand.o cmd_net.o cmd_nvedit.o \ - cmd_pci.o cmd_pcmcia.o cmd_portio.o \ -Index: u-boot/common/cmd_license.c -=================================================================== ---- /dev/null -+++ u-boot/common/cmd_license.c -@@ -0,0 +1,57 @@ -+/* -+ * (C) Copyright 2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+#if (CONFIG_COMMANDS & CFG_CMD_LICENSE) -+ -+#define LICENSE_MAX 20480 -+#include <command.h> -+#include <malloc.h> -+#include <license.h> -+int gunzip(void *, int, unsigned char *, unsigned long *); -+ -+int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -+{ -+ char *tok, *dst = malloc(LICENSE_MAX); -+ unsigned long len = LICENSE_MAX; -+ -+ if (!dst) -+ return -1; -+ -+ if (gunzip(dst, LICENSE_MAX, gpl_gz, &len) != 0) { -+ printf("Error uncompressing license text\n"); -+ free(dst); -+ return -1; -+ } -+ puts(dst); -+ free(dst); -+ -+ return 0; -+} -+ -+U_BOOT_CMD(license, 1, 1, do_license, -+ "license - print GPL license text\n", -+ NULL); -+ -+#endif /* CFG_CMD_LICENSE */ -Index: u-boot/include/cmd_confdefs.h -=================================================================== ---- u-boot.orig/include/cmd_confdefs.h -+++ u-boot/include/cmd_confdefs.h -@@ -75,6 +75,7 @@ - #define CFG_CMD_FPGA 0x0000010000000000ULL /* FPGA configuration Support */ - #define CFG_CMD_HWFLOW 0x0000020000000000ULL /* RTS/CTS hw flow control */ - #define CFG_CMD_SAVES 0x0000040000000000ULL /* save S record dump */ -+#define CFG_CMD_LICENSE 0x0000080000000000ULL /* Display GPL License */ - #define CFG_CMD_SPI 0x0000100000000000ULL /* SPI utility */ - #define CFG_CMD_FDOS 0x0000200000000000ULL /* Floppy DOS support */ - #define CFG_CMD_VFD 0x0000400000000000ULL /* VFD support (TRAB) */ -Index: u-boot/include/license.h -=================================================================== ---- /dev/null -+++ u-boot/include/license.h -@@ -0,0 +1,584 @@ -+/* bin2header converting 'gpl.gz' */ -+unsigned char gpl_gz[] = { -+ 0x1f, 0x8b, 0x08, 0x08, 0xb2, 0x10, 0x0d, 0x46, 0x00, 0x03, -+ 0x67, 0x70, 0x6c, 0x00, 0x9d, 0x5b, 0x5d, 0x77, 0xdb, 0x46, -+ 0x92, 0x7d, 0x4e, 0xff, 0x8a, 0x3e, 0x7e, 0x89, 0x74, 0x0e, -+ 0xc3, 0xc4, 0x9e, 0x9d, 0xdd, 0x49, 0xfc, 0x44, 0x49, 0x94, -+ 0xcd, 0x1d, 0x99, 0x52, 0x48, 0xca, 0x8e, 0x1f, 0x41, 0xb2, -+ 0x29, 0x62, 0x0c, 0x02, 0x5c, 0x7c, 0x48, 0xe6, 0xbf, 0xdf, -+ 0x7b, 0xab, 0xba, 0x81, 0x06, 0x49, 0x25, 0xb3, 0x9b, 0x93, -+ 0xc4, 0x16, 0x09, 0x54, 0xd7, 0x77, 0xdd, 0xaa, 0x2e, 0xfd, -+ 0xf0, 0x83, 0xc5, 0x3f, 0x1f, 0xa6, 0x8f, 0xf6, 0xc3, 0x78, -+ 0x3a, 0x9e, 0x8d, 0xee, 0xec, 0xc3, 0xe3, 0xd5, 0xdd, 0xe4, -+ 0xda, 0xe2, 0xbf, 0xf1, 0x74, 0x3e, 0x36, 0x3f, 0xc8, 0x03, -+ 0xf8, 0xe7, 0xb3, 0x2b, 0xab, 0xb4, 0xc8, 0xed, 0xbb, 0x81, -+ 0xfd, 0xef, 0x26, 0x77, 0xf6, 0xed, 0xaf, 0xbf, 0xbe, 0x35, -+ 0xc6, 0x5e, 0x17, 0xfb, 0x43, 0x99, 0x3e, 0x6d, 0x6b, 0x7b, -+ 0x71, 0x7d, 0x89, 0x0f, 0xff, 0xf1, 0xeb, 0x40, 0xbe, 0xb2, -+ 0xb7, 0xa5, 0x73, 0x76, 0x5e, 0x6c, 0xea, 0x97, 0xa4, 0x74, -+ 0xf6, 0xb6, 0x68, 0xf2, 0x75, 0x52, 0x83, 0xc0, 0xc0, 0x4e, -+ 0xf2, 0xd5, 0x70, 0x60, 0xec, 0xdf, 0xf9, 0x4c, 0x92, 0x7f, -+ 0xcb, 0xd2, 0xdc, 0xce, 0x6b, 0x3c, 0x5d, 0x0f, 0xec, 0x6d, -+ 0xba, 0xa9, 0xb7, 0xf6, 0x36, 0x2b, 0x8a, 0x72, 0x60, 0xaf, -+ 0x8a, 0xaa, 0xe6, 0xf3, 0x9f, 0x46, 0xf6, 0x97, 0x77, 0x6f, -+ 0xdf, 0xfe, 0xf2, 0xd3, 0xdb, 0xbf, 0xfd, 0xf2, 0xd6, 0x3e, -+ 0xce, 0x47, 0xc6, 0x8e, 0x9f, 0x5d, 0x79, 0x28, 0xc0, 0x45, -+ 0x5a, 0xd9, 0xbd, 0x2b, 0x77, 0x69, 0x5d, 0xbb, 0xb5, 0xad, -+ 0x0b, 0xbb, 0x02, 0x3b, 0x36, 0xc9, 0xd7, 0x76, 0x9d, 0x56, -+ 0x75, 0x99, 0x2e, 0x9b, 0xda, 0x59, 0x3c, 0xbb, 0xc4, 0xd1, -+ 0x3b, 0x7e, 0x99, 0xba, 0xca, 0xd8, 0x62, 0x63, 0xeb, 0x2d, -+ 0xde, 0xcc, 0xd2, 0x95, 0xcb, 0x2b, 0x67, 0xd7, 0xc5, 0xaa, -+ 0xd9, 0xb9, 0x1c, 0xe7, 0xe3, 0x79, 0xbb, 0xda, 0x26, 0xf9, -+ 0x53, 0x9a, 0x3f, 0xd9, 0xb4, 0x26, 0xf9, 0xbc, 0xa8, 0x6d, -+ 0x92, 0x65, 0xc5, 0x8b, 0x5b, 0x0f, 0x0d, 0xd4, 0x21, 0xfa, -+ 0x78, 0x28, 0x5d, 0xb2, 0x5b, 0x66, 0x0e, 0x0a, 0xb0, 0x8b, -+ 0xad, 0x0b, 0x94, 0x2a, 0xbb, 0x29, 0x4a, 0xbb, 0x03, 0xdf, -+ 0xb6, 0x0a, 0x92, 0xf3, 0xbf, 0xb5, 0xab, 0xd2, 0xa7, 0x5c, -+ 0x39, 0xac, 0x93, 0x6f, 0xf8, 0xf0, 0x25, 0x39, 0xd8, 0x43, -+ 0xd1, 0x94, 0x66, 0x03, 0xc1, 0xd7, 0xc5, 0x8e, 0xdf, 0x54, -+ 0x5b, 0x79, 0x1e, 0xcc, 0x0b, 0x0b, 0x10, 0xae, 0x1e, 0x5a, -+ 0x7b, 0x75, 0x00, 0xdf, 0x79, 0x5d, 0x26, 0x15, 0xf8, 0xab, -+ 0x71, 0x96, 0x18, 0xcb, 0xe5, 0xae, 0x4c, 0x32, 0xfb, 0xd0, -+ 0x2c, 0x71, 0xb4, 0xb9, 0xf3, 0x82, 0x80, 0xdd, 0x34, 0xaf, -+ 0x5d, 0xbe, 0xd6, 0xa3, 0x9e, 0x9a, 0x04, 0x0a, 0xae, 0x61, -+ 0x07, 0x1e, 0x65, 0xff, 0xec, 0x28, 0x7e, 0x67, 0x02, 0xcf, -+ 0x3f, 0xfd, 0x84, 0x47, 0x76, 0xe4, 0xb3, 0x6a, 0xf0, 0x18, -+ 0x0f, 0x6d, 0xc5, 0xc1, 0x11, 0x7c, 0x56, 0x04, 0x85, 0x5a, -+ 0xc0, 0x63, 0x65, 0x9b, 0x0a, 0xbe, 0x31, 0xa4, 0x26, 0xd2, -+ 0xca, 0xf4, 0x59, 0xb3, 0x81, 0xb5, 0x64, 0xbf, 0xcf, 0xa0, -+ 0x7c, 0x1e, 0x2e, 0xfa, 0x11, 0x1b, 0xb8, 0xbe, 0x97, 0x98, -+ 0xce, 0x4b, 0x7e, 0xac, 0x22, 0x0d, 0xe6, 0x22, 0x4d, 0x92, -+ 0x1f, 0x6c, 0x81, 0x77, 0x4a, 0xbb, 0x2f, 0x8b, 0xa7, 0x32, -+ 0xd9, 0xd9, 0x97, 0x6d, 0x41, 0xca, 0x4d, 0xbd, 0x2d, 0xca, -+ 0x0a, 0x5a, 0xda, 0xc1, 0x0f, 0xf0, 0xa4, 0x69, 0x2a, 0x35, -+ 0x1f, 0x58, 0xba, 0x98, 0x17, 0x3b, 0xe7, 0x5f, 0x7b, 0xcd, -+ 0x23, 0x7b, 0xc2, 0xad, 0x0a, 0xb8, 0x0b, 0xd4, 0xb7, 0x3c, -+ 0x98, 0xa0, 0xec, 0x3b, 0x57, 0x41, 0x40, 0xfb, 0x8a, 0x60, -+ 0x69, 0x5e, 0xd5, 0x2e, 0x59, 0x0f, 0x2f, 0xad, 0xfd, 0x5a, -+ 0x34, 0x76, 0x95, 0xe4, 0x22, 0xeb, 0xc1, 0x2a, 0x2f, 0xa2, -+ 0x79, 0xcf, 0x70, 0x05, 0x03, 0x16, 0xc5, 0x90, 0x4e, 0xf3, -+ 0x65, 0xeb, 0x72, 0xfb, 0x02, 0xbd, 0xee, 0x5d, 0xf2, 0x8d, -+ 0xca, 0x10, 0xa5, 0x06, 0x46, 0x06, 0xfc, 0x8a, 0x0c, 0x95, -+ 0x6e, 0xe3, 0xca, 0x92, 0xd2, 0x40, 0x01, 0xde, 0x7e, 0x03, -+ 0xba, 0xa4, 0xd9, 0x97, 0x38, 0x1f, 0x02, 0xde, 0x37, 0xaf, -+ 0x71, 0x56, 0x9d, 0xb8, 0x5e, 0x6c, 0xd2, 0xa4, 0xa6, 0x53, -+ 0x98, 0x6d, 0xf2, 0xac, 0x06, 0x8e, 0x9c, 0x23, 0x0a, 0x1d, -+ 0x8d, 0x98, 0x13, 0xfe, 0xec, 0x85, 0x77, 0x9d, 0xf2, 0x49, -+ 0x3c, 0xc1, 0x48, 0x38, 0x41, 0x49, 0xcf, 0x38, 0xda, 0xa6, -+ 0x1b, 0x92, 0xb6, 0x2f, 0x69, 0xb5, 0xbd, 0x1c, 0xb4, 0x47, -+ 0x41, 0x96, 0x95, 0x4b, 0x9f, 0x49, 0xa4, 0x29, 0x57, 0x24, -+ 0xbd, 0x86, 0x61, 0x4a, 0x51, 0xd8, 0x93, 0x43, 0xa8, 0xd5, -+ 0x26, 0xbc, 0x08, 0x9f, 0xc5, 0x8f, 0xd1, 0xab, 0x7c, 0xc6, -+ 0x3b, 0x6a, 0xcf, 0x19, 0xf1, 0x3a, 0x7c, 0xcf, 0x82, 0xc7, -+ 0x95, 0x72, 0x49, 0x22, 0xb9, 0xcd, 0xdd, 0x8b, 0xf2, 0x1b, -+ 0xf4, 0xfe, 0x5e, 0x7d, 0x28, 0x90, 0xfb, 0x96, 0x17, 0x2f, -+ 0x2d, 0xdd, 0x75, 0x41, 0x9a, 0x15, 0x29, 0x43, 0xcf, 0x95, -+ 0x58, 0x67, 0x51, 0xf0, 0xd5, 0xda, 0xad, 0x6a, 0x8d, 0x1c, -+ 0x49, 0x70, 0x95, 0x58, 0x25, 0x77, 0x91, 0x2e, 0x4b, 0x47, -+ 0x4d, 0xad, 0xe8, 0x44, 0x95, 0x92, 0x87, 0x32, 0x96, 0xe9, -+ 0xda, 0xc0, 0x57, 0x99, 0x9d, 0xa8, 0x4c, 0x97, 0x4b, 0xa4, -+ 0xfb, 0x43, 0x94, 0x12, 0x19, 0xa7, 0x47, 0x57, 0xdf, 0xf4, -+ 0xab, 0x82, 0x56, 0x29, 0x19, 0xb7, 0xa5, 0x08, 0xa8, 0x4f, -+ 0x0d, 0xcd, 0x42, 0xdf, 0xe9, 0x9d, 0x82, 0x88, 0xae, 0xb2, -+ 0xa4, 0x16, 0xe2, 0x2b, 0x57, 0xd6, 0x09, 0x04, 0xc6, 0x13, -+ 0x7b, 0x7c, 0x99, 0x2e, 0xd3, 0x2c, 0xad, 0x53, 0x9f, 0x86, -+ 0x48, 0x59, 0x35, 0x6a, 0xce, 0x5a, 0x34, 0xd6, 0xe4, 0x80, -+ 0x1c, 0x79, 0xf5, 0xef, 0x8a, 0x75, 0xba, 0xa1, 0xfb, 0x8a, -+ 0x2a, 0x6e, 0xf1, 0x85, 0xfb, 0x9e, 0xec, 0xf6, 0x19, 0x1e, -+ 0xf2, 0x4f, 0x9c, 0x25, 0x57, 0x35, 0xab, 0xad, 0x4d, 0x82, -+ 0xca, 0xa1, 0xab, 0xad, 0x63, 0xd4, 0x19, 0xfc, 0x54, 0xa7, -+ 0x22, 0xb1, 0xa4, 0x0c, 0xbb, 0x71, 0x20, 0x24, 0xe7, 0x34, -+ 0x48, 0x03, 0x4f, 0xa9, 0xf7, 0x3f, 0x78, 0x47, 0x0a, 0x52, -+ 0x39, 0x94, 0xc3, 0xb4, 0xd2, 0x69, 0x41, 0xf4, 0xca, 0x30, -+ 0xb2, 0xf4, 0xd5, 0xa1, 0x46, 0x99, 0xbc, 0x7b, 0xe4, 0xce, -+ 0x78, 0xe5, 0x20, 0x01, 0x36, 0x68, 0x5d, 0x2d, 0x72, 0x2f, -+ 0x7c, 0x6b, 0x22, 0xcf, 0x03, 0x9d, 0x11, 0x5c, 0xa2, 0xe5, -+ 0xa3, 0xda, 0xc2, 0x25, 0xf0, 0xcc, 0x2e, 0x38, 0x03, 0x8a, -+ 0x0a, 0x53, 0x90, 0x50, 0x55, 0x87, 0xc1, 0xdf, 0xd2, 0xd2, -+ 0x04, 0xd3, 0x30, 0x86, 0xdd, 0x39, 0x2f, 0x81, 0xdf, 0xa3, -+ 0x84, 0xd5, 0x2f, 0xb0, 0x69, 0xed, 0xf6, 0xd5, 0x6f, 0xf6, -+ 0xe2, 0xed, 0xa5, 0x94, 0x25, 0xad, 0x92, 0x7d, 0xad, 0xc3, -+ 0x2d, 0xcd, 0xc5, 0xbb, 0x4b, 0xe8, 0x0f, 0x71, 0xee, 0xdd, -+ 0x24, 0x2a, 0x4c, 0x2f, 0xdb, 0x14, 0x4a, 0xa5, 0x8e, 0x2a, -+ 0xf9, 0x32, 0x73, 0x4f, 0x08, 0x73, 0x29, 0x78, 0x95, 0x14, -+ 0x63, 0x5f, 0xf1, 0x06, 0xb1, 0x85, 0x41, 0xf3, 0x67, 0xa9, -+ 0x42, 0x62, 0xc6, 0xf8, 0x3c, 0xe1, 0x7a, 0x94, 0x55, 0xd0, -+ 0x10, 0x6d, 0xe1, 0x12, 0x5a, 0x4c, 0xb2, 0x27, 0xd2, 0xad, -+ 0x17, 0x85, 0x54, 0x19, 0x2c, 0x10, 0x48, 0x1d, 0x5e, 0xa2, -+ 0x31, 0x38, 0xbc, 0x77, 0x38, 0x23, 0x0a, 0x77, 0xa1, 0x08, -+ 0x37, 0x74, 0xdc, 0xaa, 0xc6, 0x6b, 0x55, 0x6b, 0x0a, 0xcd, -+ 0xa6, 0x79, 0x81, 0xf7, 0x4b, 0x16, 0xa1, 0x83, 0x1c, 0x29, -+ 0xd2, 0xf5, 0x6a, 0x0d, 0x0c, 0x31, 0xd9, 0x9c, 0x94, 0x18, -+ 0x61, 0x3e, 0x95, 0x34, 0x8c, 0xcf, 0x77, 0x8e, 0xa7, 0xb8, -+ 0xac, 0xd2, 0x5a, 0xb0, 0x4f, 0x90, 0x8f, 0xc1, 0x61, 0x4e, -+ 0xfe, 0x8c, 0xcf, 0x16, 0x55, 0xec, 0x41, 0x60, 0xd7, 0x9b, -+ 0x0c, 0xcc, 0xbc, 0x04, 0xe7, 0x10, 0x07, 0x0a, 0x25, 0x9d, -+ 0x27, 0x16, 0x30, 0x49, 0x9a, 0x27, 0xd9, 0x00, 0x67, 0xa8, -+ 0x48, 0xac, 0x31, 0x50, 0x04, 0x2a, 0xfb, 0x4e, 0x4a, 0x69, -+ 0x59, 0xac, 0x9b, 0x95, 0xb2, 0x21, 0x35, 0x84, 0xd6, 0x85, -+ 0x77, 0x92, 0x00, 0x52, 0x73, 0x46, 0xd3, 0xd3, 0x0a, 0x11, -+ 0x2d, 0xe3, 0xcb, 0xd1, 0x8f, 0x78, 0x60, 0xdf, 0xd4, 0x52, -+ 0x60, 0xd4, 0x5d, 0x6e, 0xf9, 0x75, 0x76, 0x18, 0xc8, 0x21, -+ 0x71, 0x7a, 0x22, 0x4b, 0xf5, 0x16, 0x88, 0x02, 0x95, 0x1b, -+ 0x67, 0xa1, 0xda, 0x53, 0x97, 0x35, 0x4a, 0x88, 0x48, 0xef, -+ 0x6b, 0xe3, 0x9e, 0x5f, 0xd7, 0x2c, 0xb3, 0xf0, 0x3b, 0xe6, -+ 0x56, 0xc9, 0x20, 0xcf, 0x45, 0xba, 0x96, 0xf3, 0xd7, 0xcc, -+ 0x8e, 0xa5, 0x4a, 0x8c, 0xfa, 0x15, 0xdc, 0x81, 0x85, 0x11, -+ 0xc1, 0x99, 0xa8, 0xd2, 0xdb, 0xc2, 0x49, 0x21, 0xd2, 0x7c, -+ 0x9d, 0x3e, 0xa7, 0xeb, 0x86, 0x4c, 0xd9, 0x62, 0x29, 0x89, -+ 0x44, 0x0f, 0x69, 0xe1, 0x0c, 0x22, 0x3e, 0xb7, 0x0e, 0xbe, -+ 0xb9, 0x92, 0x68, 0x93, 0x3a, 0xb4, 0xed, 0xc8, 0xe0, 0x4f, -+ 0x94, 0x21, 0x57, 0x27, 0xe5, 0x61, 0xe8, 0x93, 0x26, 0x7c, -+ 0x82, 0xee, 0x02, 0x33, 0x8b, 0xf3, 0x88, 0xc6, 0x77, 0xc9, -+ 0x9a, 0x58, 0xc6, 0xae, 0x32, 0x97, 0x78, 0x0e, 0xa1, 0x02, -+ 0x2f, 0x90, 0x86, 0xdf, 0xb2, 0x85, 0x50, 0x6b, 0x75, 0x4d, -+ 0xef, 0x5a, 0x3f, 0x7a, 0xb4, 0xc1, 0x2c, 0x8f, 0x8f, 0xa9, -+ 0xf7, 0xf6, 0xb9, 0x44, 0x70, 0xd9, 0x30, 0x40, 0xb0, 0x3d, -+ 0xed, 0xdf, 0x46, 0xae, 0xd4, 0xa7, 0x02, 0x12, 0x6a, 0xd6, -+ 0x24, 0x4d, 0x06, 0x0a, 0x24, 0x18, 0x74, 0xe9, 0xcb, 0xfb, -+ 0xba, 0x51, 0x6f, 0x5b, 0x29, 0x18, 0xd8, 0x14, 0x04, 0x7b, -+ 0x02, 0xf5, 0xfe, 0x02, 0x1a, 0xe3, 0xdb, 0xc5, 0x78, 0xf6, -+ 0x69, 0x6e, 0x47, 0xd3, 0x1b, 0x7b, 0x7d, 0x3f, 0xbd, 0x99, -+ 0x2c, 0x26, 0xf7, 0xd3, 0xb9, 0xbd, 0xbd, 0x9f, 0xe1, 0xc7, -+ 0x87, 0xaf, 0x93, 0xe9, 0x87, 0x81, 0xbd, 0x99, 0xcc, 0x17, -+ 0xb3, 0xc9, 0xd5, 0x23, 0xbf, 0x92, 0x07, 0x3f, 0xdd, 0xdf, -+ 0x4c, 0x6e, 0x27, 0xd7, 0x23, 0x7e, 0x40, 0xde, 0x7f, 0x19, -+ 0x0a, 0x6e, 0x3a, 0x07, 0x94, 0xbc, 0x37, 0x8a, 0xae, 0x21, -+ 0x80, 0xa2, 0x98, 0x97, 0xa2, 0xfc, 0xe6, 0x13, 0x03, 0x71, -+ 0x21, 0xac, 0x56, 0x99, 0x84, 0x9a, 0x61, 0xe9, 0xdd, 0x67, -+ 0x89, 0x77, 0x57, 0xfa, 0x44, 0x97, 0x75, 0xb6, 0x45, 0xc6, -+ 0xda, 0x52, 0x25, 0x07, 0x0f, 0x6c, 0x77, 0xc0, 0x9f, 0x50, -+ 0x7a, 0x97, 0x36, 0xd6, 0xa6, 0x69, 0xcb, 0x8f, 0xaa, 0x30, -+ 0xa0, 0xe4, 0xf3, 0xe8, 0x62, 0xa8, 0x5a, 0x7f, 0xf3, 0xa0, -+ 0xfc, 0xbd, 0x01, 0x76, 0x76, 0xd0, 0xdb, 0xc0, 0x08, 0x64, -+ 0x69, 0xd9, 0x97, 0xaa, 0x10, 0xc9, 0x40, 0xee, 0x25, 0xed, -+ 0xc1, 0x25, 0xdf, 0x88, 0x28, 0xcb, 0x44, 0x83, 0x59, 0x4e, -+ 0x0e, 0xd4, 0xcc, 0xce, 0xa1, 0xcc, 0x59, 0x97, 0x8a, 0xc8, -+ 0xd1, 0x37, 0xa4, 0x41, 0xba, 0x60, 0x35, 0x7d, 0x86, 0xc1, -+ 0xe0, 0x5e, 0x42, 0x45, 0x99, 0xef, 0x04, 0xce, 0x92, 0x97, -+ 0xdf, 0x34, 0xa4, 0x53, 0xe1, 0x05, 0x92, 0xe3, 0x58, 0x7d, -+ 0xd6, 0xab, 0xcd, 0x7b, 0x73, 0x8f, 0xb2, 0xdd, 0x17, 0xa5, -+ 0x78, 0x81, 0x60, 0x89, 0x81, 0xf1, 0x0c, 0xb4, 0x1d, 0x04, -+ 0x25, 0x60, 0x7a, 0x8f, 0x3d, 0xa6, 0x0a, 0x19, 0xb7, 0x2d, -+ 0xcd, 0x6b, 0xa6, 0x0e, 0xca, 0x2f, 0x16, 0x33, 0x19, 0x42, -+ 0xb3, 0x49, 0x9e, 0xa8, 0xb2, 0x8b, 0x8f, 0x48, 0x8c, 0xc8, -+ 0x03, 0x1b, 0xa8, 0x78, 0xd0, 0xbe, 0xc0, 0x03, 0x05, 0xba, -+ 0xaf, 0xb2, 0x86, 0xd0, 0x9d, 0x47, 0x14, 0x0d, 0x5d, 0x1d, -+ 0x80, 0xd6, 0x7f, 0x9d, 0x9b, 0x60, 0x19, 0xfb, 0x26, 0x3e, -+ 0xfd, 0x0d, 0x81, 0xe7, 0x98, 0x99, 0xdc, 0x07, 0x86, 0x64, -+ 0xb8, 0x64, 0xbd, 0x2e, 0x9d, 0x64, 0xc9, 0xa4, 0xb2, 0x6f, -+ 0x50, 0x3a, 0xde, 0xc0, 0xa1, 0x47, 0xc8, 0xee, 0xcf, 0x8a, -+ 0x0f, 0x0a, 0xaf, 0x57, 0xe2, 0xaa, 0xd7, 0xc2, 0xa2, 0x27, -+ 0xa4, 0x60, 0x49, 0xe2, 0xce, 0x0e, 0x1f, 0xab, 0x77, 0x78, -+ 0x77, 0x78, 0xaf, 0x19, 0x56, 0x40, 0x59, 0x53, 0x57, 0xa9, -+ 0x44, 0x3c, 0x0a, 0x28, 0xa8, 0x07, 0x57, 0x49, 0x98, 0x2c, -+ 0x37, 0xa6, 0x6c, 0xf2, 0x13, 0xd5, 0xfb, 0x9c, 0x1c, 0x80, -+ 0x8e, 0x5b, 0x0f, 0x3c, 0x60, 0x13, 0x6a, 0x48, 0xa3, 0xc8, -+ 0x02, 0xc5, 0x2e, 0x7e, 0xc5, 0x44, 0x50, 0xbd, 0xc8, 0x89, -+ 0xb6, 0x37, 0x72, 0x20, 0x6d, 0x2b, 0x25, 0x40, 0xb2, 0x68, -+ 0x5a, 0x4b, 0x41, 0xb4, 0x27, 0x8e, 0x66, 0xc2, 0xc9, 0x17, -+ 0xc8, 0x82, 0x6e, 0x4f, 0xe4, 0x95, 0x4b, 0x4f, 0x82, 0x84, -+ 0x45, 0xe6, 0x96, 0x0e, 0xf0, 0x5c, 0xf2, 0x16, 0xe4, 0x3c, -+ 0xc3, 0xf1, 0xe5, 0xd0, 0x7c, 0x51, 0x7c, 0x63, 0x5b, 0x27, -+ 0x2b, 0x1b, 0xa2, 0x6d, 0xd2, 0xaa, 0x78, 0x4a, 0x28, 0x3b, -+ 0xad, 0x90, 0xeb, 0xc2, 0x69, 0x21, 0x78, 0x3b, 0x54, 0x0c, -+ 0x93, 0x1c, 0xfe, 0x9d, 0x76, 0x35, 0x40, 0x35, 0x4f, 0xe6, -+ 0xc7, 0x2a, 0x86, 0x31, 0x34, 0x6f, 0x8c, 0xad, 0x89, 0x9a, -+ 0xd3, 0x5c, 0x22, 0x64, 0x87, 0x22, 0xd0, 0x00, 0x87, 0x21, -+ 0xf8, 0x90, 0xe5, 0x5d, 0x07, 0x7f, 0x0d, 0x55, 0xb3, 0x4f, -+ 0x57, 0x4d, 0xd1, 0x54, 0x99, 0x9e, 0x8e, 0x9c, 0x23, 0xa9, -+ 0x1c, 0xbe, 0x8b, 0x4f, 0xf6, 0x0c, 0x74, 0xd4, 0x17, 0x08, -+ 0x21, 0x10, 0xc1, 0x33, 0x19, 0x3f, 0x65, 0xba, 0x48, 0xf3, -+ 0x99, 0xc7, 0x0b, 0xb1, 0xca, 0x92, 0x74, 0x07, 0xad, 0x80, -+ 0xe9, 0x50, 0xf8, 0xdf, 0xdb, 0x6f, 0xce, 0xed, 0x19, 0x12, -+ 0xf4, 0x00, 0x0f, 0xee, 0x8c, 0xbe, 0x56, 0x85, 0x82, 0x45, -+ 0xf8, 0xc3, 0xe6, 0xb8, 0x97, 0x09, 0xb5, 0xef, 0xa3, 0xf0, -+ 0xc9, 0xb2, 0x72, 0x39, 0x4e, 0x61, 0x29, 0x83, 0x6c, 0x2d, -+ 0x69, 0xc3, 0x67, 0x04, 0x43, 0x76, 0xdd, 0x61, 0x84, 0x03, -+ 0xfa, 0xaa, 0x83, 0x23, 0x88, 0x28, 0x21, 0xb1, 0xf9, 0x73, -+ 0x4c, 0x92, 0x15, 0xb0, 0xae, 0xc2, 0xb6, 0xee, 0x69, 0x98, -+ 0xaa, 0xb5, 0x92, 0x36, 0x3a, 0x82, 0x5d, 0x3d, 0x8c, 0x41, -+ 0xaa, 0xdd, 0x1e, 0x2a, 0x04, 0x47, 0xe6, 0xfd, 0x5a, 0x83, -+ 0x39, 0x74, 0x6b, 0x7a, 0x92, 0xe2, 0xbb, 0x83, 0xa7, 0x92, -+ 0x78, 0x98, 0x58, 0xec, 0x7d, 0x86, 0xa1, 0xcc, 0x2d, 0x3a, -+ 0x8a, 0xe0, 0x17, 0x6b, 0xee, 0xf7, 0xd0, 0x97, 0x07, 0xcc, -+ 0x2c, 0x9e, 0xf3, 0xae, 0xf3, 0x1c, 0x0f, 0xef, 0x84, 0xa2, -+ 0x4a, 0x55, 0x9e, 0x77, 0x98, 0x90, 0x31, 0x7d, 0x66, 0x33, -+ 0x9a, 0xd9, 0xf0, 0x44, 0x23, 0x65, 0x71, 0xa7, 0xec, 0xbe, -+ 0x9a, 0x8a, 0x07, 0xbe, 0x94, 0xaa, 0x9f, 0xc6, 0x38, 0x53, -+ 0x52, 0x7b, 0x3f, 0x11, 0xfa, 0x04, 0x6f, 0xcf, 0x94, 0x92, -+ 0xb9, 0x17, 0xee, 0xad, 0x49, 0x96, 0x88, 0xdb, 0x33, 0x7e, -+ 0x09, 0xd7, 0x00, 0xde, 0xde, 0x39, 0xa7, 0x4e, 0xa2, 0x52, -+ 0x54, 0x2e, 0x2a, 0xe3, 0xbf, 0x51, 0x07, 0xd6, 0x26, 0x97, -+ 0x5d, 0x0f, 0xb0, 0x4a, 0x9a, 0x4a, 0x1b, 0x88, 0x16, 0x32, -+ 0x6e, 0xd2, 0x4c, 0xcb, 0xe7, 0x0a, 0xba, 0x15, 0xc5, 0x42, -+ 0x46, 0x86, 0xb7, 0x77, 0x39, 0xa1, 0x51, 0x31, 0xaf, 0x4a, -+ 0x4c, 0x87, 0x16, 0x53, 0xf4, 0xad, 0x39, 0x47, 0x29, 0x84, -+ 0x0c, 0xb4, 0x66, 0xb3, 0xe5, 0x1d, 0x4f, 0x9f, 0x1a, 0x2a, -+ 0x1f, 0xcb, 0x13, 0x3e, 0xc4, 0x37, 0xa9, 0x80, 0x96, 0x6c, -+ 0xa4, 0x2f, 0x28, 0xc7, 0x47, 0x96, 0xef, 0x6c, 0x91, 0xd3, -+ 0x49, 0xe6, 0x05, 0xc5, 0x59, 0xbe, 0x15, 0xfc, 0x55, 0xd6, -+ 0x6d, 0x59, 0x97, 0xcf, 0x2a, 0x2d, 0x75, 0x94, 0xeb, 0x28, -+ 0x05, 0x7a, 0xc3, 0x0a, 0x0d, 0x79, 0x4f, 0x50, 0x77, 0xb1, -+ 0x61, 0x0f, 0xd4, 0x03, 0x54, 0xc8, 0x11, 0x89, 0x3f, 0x25, -+ 0xa1, 0x16, 0x82, 0x3f, 0xb3, 0x44, 0x49, 0x34, 0xa6, 0xe5, -+ 0xba, 0xa5, 0x42, 0x07, 0x7a, 0x0d, 0x09, 0x84, 0xd2, 0xaf, -+ 0xe2, 0xaf, 0x2e, 0x03, 0x72, 0x6f, 0x55, 0x1f, 0x0a, 0x7d, -+ 0x0e, 0xbf, 0x12, 0x58, 0x09, 0x50, 0xbb, 0xd6, 0xc9, 0x8c, -+ 0x34, 0x07, 0x1c, 0x4e, 0x95, 0x09, 0xcb, 0x10, 0xf2, 0x8c, -+ 0x17, 0x1e, 0x89, 0x16, 0x09, 0x36, 0x6a, 0x09, 0x55, 0x95, -+ 0xf4, 0x51, 0xf9, 0x12, 0x96, 0x2a, 0x59, 0x52, 0x43, 0x16, -+ 0x66, 0x44, 0xd0, 0xf5, 0xe4, 0xf5, 0x88, 0xa0, 0x60, 0xc4, -+ 0x34, 0xf7, 0x0c, 0x71, 0xc2, 0x54, 0xae, 0x51, 0x69, 0x4b, -+ 0x66, 0x0b, 0xe9, 0x0b, 0xc1, 0x5d, 0xca, 0x24, 0x5f, 0xd2, -+ 0x28, 0x00, 0x4a, 0x74, 0x68, 0xf5, 0xa7, 0x3c, 0x2f, 0x1a, -+ 0x64, 0x17, 0x8e, 0x00, 0x7d, 0x11, 0x96, 0xa0, 0xe8, 0x65, -+ 0x3c, 0x7b, 0x36, 0xe3, 0x25, 0x42, 0xc0, 0x7f, 0xf0, 0x7a, -+ 0xeb, 0x73, 0x41, 0x48, 0x8b, 0xf6, 0x65, 0x10, 0x10, 0x58, -+ 0xeb, 0x1f, 0x3e, 0x0a, 0x94, 0x8f, 0xf6, 0x85, 0xcb, 0x6e, -+ 0x5e, 0x21, 0xb3, 0x35, 0x89, 0xf8, 0x08, 0xd5, 0xab, 0xc7, -+ 0x07, 0x6d, 0x8b, 0xb9, 0x84, 0xc2, 0x71, 0xc0, 0xf8, 0x32, -+ 0xea, 0xb2, 0x2c, 0xd4, 0x2f, 0x92, 0xb3, 0xd2, 0xeb, 0x16, -+ 0xf6, 0x39, 0x75, 0x2f, 0x47, 0x39, 0x51, 0xa8, 0x74, 0x08, -+ 0xef, 0x62, 0xfc, 0x7d, 0xe5, 0x24, 0x5d, 0xfd, 0xc6, 0x02, -+ 0xdb, 0x2b, 0xd9, 0x75, 0xe5, 0xb2, 0x4d, 0x98, 0x38, 0x06, -+ 0x1b, 0x80, 0x37, 0x21, 0xc1, 0x5a, 0x27, 0x25, 0xbd, 0xf5, -+ 0x04, 0x55, 0xbe, 0x0e, 0x09, 0xf2, 0x9e, 0xca, 0x07, 0x9a, -+ 0xc4, 0x7a, 0x19, 0x28, 0x48, 0x73, 0x8a, 0x10, 0xfe, 0xa7, -+ 0x49, 0x4b, 0x9d, 0xc0, 0x28, 0xc5, 0x23, 0x62, 0xc3, 0x4b, -+ 0xd3, 0x4e, 0x4d, 0xe4, 0xd1, 0x9d, 0x8e, 0x14, 0x64, 0x22, -+ 0xe7, 0x8b, 0x49, 0xeb, 0xae, 0x72, 0x64, 0x17, 0x1d, 0xd2, -+ 0x8a, 0x9a, 0x94, 0x50, 0x00, 0xdf, 0x27, 0x68, 0x02, 0x6d, -+ 0xe5, 0xfc, 0xd8, 0x45, 0xf4, 0xc3, 0x66, 0x52, 0x5e, 0x51, -+ 0x2c, 0xf4, 0x6a, 0x64, 0x0e, 0xa4, 0x2c, 0x71, 0xf2, 0xb0, -+ 0x24, 0x1f, 0x49, 0x55, 0xe4, 0xa0, 0x26, 0x73, 0x5c, 0x22, -+ 0xa3, 0x52, 0x00, 0x62, 0x07, 0x3b, 0xf8, 0x70, 0xe5, 0x10, -+ 0x7c, 0x74, 0x33, 0x1e, 0x50, 0x79, 0xb8, 0xb7, 0x83, 0x8a, -+ 0x9f, 0xd9, 0x85, 0xd5, 0x0c, 0x84, 0x38, 0x04, 0xd5, 0xb0, -+ 0x04, 0x3c, 0x12, 0xa1, 0x03, 0x4e, 0xb1, 0x64, 0x50, 0xdd, -+ 0xc9, 0x59, 0xa0, 0xb2, 0xb5, 0xec, 0x4b, 0x24, 0x1d, 0xe5, -+ 0x23, 0x99, 0x76, 0x24, 0xd5, 0xd1, 0xd1, 0x9c, 0x38, 0x37, -+ 0x75, 0xfb, 0x82, 0x39, 0xf2, 0xb9, 0x2a, 0xd9, 0x45, 0x5a, -+ 0xc1, 0xdb, 0x92, 0x79, 0xa4, 0xc3, 0xd4, 0x0c, 0xa3, 0x9d, -+ 0x49, 0x5a, 0xf5, 0x6a, 0x8a, 0x39, 0xae, 0x29, 0x92, 0x57, -+ 0x63, 0xbc, 0xe9, 0x6b, 0x96, 0xd2, 0x08, 0x2d, 0xa1, 0x7f, -+ 0x2b, 0x24, 0x21, 0xd3, 0xd7, 0x80, 0x4e, 0x7f, 0xbb, 0x61, -+ 0x88, 0x76, 0x79, 0x8a, 0x01, 0x02, 0x16, 0x46, 0x0b, 0xf1, -+ 0x9d, 0xf3, 0x70, 0x6f, 0x7a, 0x43, 0xd3, 0x96, 0xfe, 0x98, -+ 0x80, 0x31, 0x1b, 0x29, 0x16, 0x3a, 0x0c, 0xc1, 0x07, 0xd2, -+ 0x7a, 0xaa, 0x58, 0xa5, 0x7b, 0x4a, 0xca, 0x35, 0x6a, 0x81, -+ 0xd8, 0x1f, 0x2f, 0xd9, 0x17, 0x56, 0x69, 0x1d, 0x8d, 0x2d, -+ 0xf0, 0xe2, 0x20, 0xba, 0x23, 0x20, 0xa7, 0x32, 0x7c, 0xaf, -+ 0xdb, 0x7c, 0xe9, 0xf5, 0x24, 0xb5, 0x88, 0xb8, 0x28, 0x9a, -+ 0xfe, 0x09, 0x4e, 0xad, 0x6a, 0x13, 0x0f, 0x8e, 0xf0, 0x98, -+ 0x36, 0x77, 0x25, 0xaf, 0x33, 0x00, 0x02, 0x84, 0x59, 0x1d, -+ 0x03, 0xe0, 0xb9, 0xf7, 0x16, 0x56, 0xda, 0x4a, 0xdf, 0xd0, -+ 0x1d, 0x25, 0xdd, 0x8d, 0x71, 0xdf, 0x5d, 0xa9, 0xcd, 0x6f, -+ 0x18, 0x9b, 0xe9, 0x64, 0x88, 0x03, 0x8c, 0xec, 0xac, 0xb2, -+ 0xa3, 0xfe, 0xa9, 0x28, 0x81, 0xe6, 0x32, 0xce, 0x32, 0x42, -+ 0x37, 0x55, 0x9d, 0x45, 0x02, 0x90, 0x79, 0x92, 0xb3, 0xb3, -+ 0x48, 0xf5, 0x1a, 0x67, 0xc7, 0x44, 0x97, 0x3c, 0x3d, 0x51, -+ 0x4b, 0x81, 0xac, 0x6f, 0x79, 0x54, 0x0e, 0x6a, 0xe5, 0x1c, -+ 0x21, 0x73, 0x0c, 0xb5, 0x24, 0x3f, 0xca, 0x87, 0x7f, 0x02, -+ 0x44, 0x2e, 0xf9, 0x73, 0x62, 0x9f, 0x8b, 0xac, 0xe1, 0x44, -+ 0x7f, 0x83, 0xa6, 0xb7, 0xaa, 0x8b, 0x12, 0x7d, 0x95, 0x4f, -+ 0xe9, 0x9d, 0x7c, 0x0a, 0x7d, 0xbb, 0x24, 0xb4, 0x2c, 0x43, -+ 0xfa, 0x8b, 0xb8, 0xd3, 0xac, 0x29, 0x3e, 0xcd, 0x26, 0xe5, -+ 0x6c, 0x91, 0xfb, 0xdb, 0x9f, 0x23, 0xf5, 0x63, 0x11, 0x8e, -+ 0xb9, 0x67, 0x07, 0xa9, 0xb5, 0x34, 0xa0, 0x9f, 0x77, 0x97, -+ 0x2c, 0x51, 0xc5, 0xf2, 0x5f, 0x9c, 0xa8, 0x84, 0x09, 0x38, -+ 0xac, 0xb7, 0x6a, 0x6a, 0xc9, 0x37, 0x04, 0x64, 0x67, 0xca, -+ 0xaf, 0x99, 0x87, 0x88, 0x7b, 0x2b, 0x3c, 0xbc, 0xb3, 0x02, -+ 0xa2, 0x5e, 0xc3, 0x50, 0x48, 0x06, 0x1c, 0x98, 0xf9, 0x98, -+ 0xd2, 0x81, 0x06, 0x34, 0xd0, 0xc1, 0xa7, 0xd1, 0x0a, 0x25, -+ 0x79, 0x4f, 0xb4, 0x02, 0xff, 0x6d, 0xad, 0xc1, 0xcf, 0x32, -+ 0x27, 0xa5, 0xae, 0xd4, 0x89, 0xb2, 0xd4, 0xc1, 0x1d, 0x22, -+ 0x03, 0x00, 0xea, 0x27, 0xd6, 0x72, 0x32, 0xa9, 0xf8, 0xa9, -+ 0xeb, 0x41, 0x06, 0x3e, 0xe6, 0x43, 0xd4, 0x46, 0x33, 0x85, -+ 0x3f, 0x01, 0x82, 0x5a, 0x6a, 0xfa, 0xe2, 0x88, 0x81, 0xbd, -+ 0xf1, 0x56, 0xa0, 0x56, 0xec, 0x92, 0x32, 0x85, 0xff, 0x37, -+ 0x61, 0x2c, 0xd4, 0x8d, 0x08, 0x59, 0x73, 0x14, 0x8c, 0xbd, -+ 0x87, 0x0a, 0x07, 0x2d, 0x20, 0x3b, 0x95, 0x2c, 0x69, 0xe3, -+ 0x49, 0x10, 0xf7, 0xc0, 0x3e, 0x27, 0x59, 0xaa, 0xe4, 0xa0, -+ 0xb3, 0x0c, 0xd9, 0xb9, 0x96, 0xe9, 0x9b, 0xca, 0x75, 0x70, -+ 0x49, 0x29, 0xd7, 0x34, 0x5d, 0x57, 0x21, 0xf8, 0x48, 0x12, -+ 0xc2, 0x61, 0xe0, 0xf1, 0xb8, 0x07, 0x50, 0x39, 0xef, 0xb2, -+ 0x74, 0xfc, 0x9c, 0xeb, 0x6d, 0x9e, 0xe0, 0x22, 0x7f, 0xbd, -+ 0x15, 0x1a, 0x04, 0x16, 0x3f, 0x57, 0x06, 0xa8, 0xed, 0x15, -+ 0x17, 0xfb, 0xeb, 0x40, 0x8a, 0xb0, 0xea, 0x5e, 0x28, 0x1c, -+ 0x6b, 0x3c, 0x2a, 0xd1, 0xc7, 0xc6, 0xe9, 0xd9, 0x41, 0x70, -+ 0x9f, 0xd6, 0xdf, 0x7f, 0xcf, 0x06, 0xaf, 0xeb, 0x5f, 0x25, -+ 0xf9, 0x7f, 0xd8, 0x60, 0xf5, 0x9a, 0x77, 0xa5, 0x39, 0x55, -+ 0xa0, 0x99, 0x22, 0x6a, 0x59, 0x05, 0x9e, 0xfa, 0xc2, 0x2c, -+ 0x06, 0xd2, 0xd2, 0x7f, 0x74, 0x0b, 0xf5, 0x8a, 0xc8, 0x84, -+ 0x28, 0x32, 0x3c, 0x4b, 0x32, 0xf0, 0x92, 0x6b, 0x3e, 0xf3, -+ 0x28, 0xc6, 0xdf, 0xd9, 0xea, 0x74, 0x60, 0x23, 0xc3, 0xc3, -+ 0x9c, 0x40, 0x94, 0x99, 0x12, 0x5d, 0xdb, 0xc9, 0xb4, 0x23, -+ 0x4c, 0x11, 0x58, 0xf4, 0xf8, 0x7e, 0xcb, 0x5f, 0x0c, 0xb5, -+ 0xfe, 0x3a, 0x78, 0x45, 0xde, 0x16, 0x9f, 0x26, 0xad, 0xd7, -+ 0xb1, 0x2b, 0x87, 0x5e, 0x4a, 0x9d, 0xee, 0xd8, 0x79, 0xb3, -+ 0x0c, 0xd5, 0x61, 0xa9, 0xda, 0xf7, 0xc8, 0xa5, 0x77, 0x3d, -+ 0xb6, 0xe9, 0x92, 0x8a, 0x0e, 0xc4, 0x94, 0x17, 0xb9, 0x14, -+ 0x54, 0x73, 0xec, 0xda, 0xca, 0xc9, 0x87, 0x78, 0x15, 0xe7, -+ 0xe7, 0xb4, 0xfd, 0xc6, 0x0c, 0xfa, 0x94, 0xeb, 0xd0, 0x5b, -+ 0xe9, 0x19, 0x62, 0xa6, 0x75, 0x20, 0xd7, 0x86, 0xbe, 0x9e, -+ 0x6e, 0xe4, 0x74, 0x3d, 0x32, 0xdc, 0xc6, 0x9c, 0xf0, 0x85, -+ 0xcf, 0x71, 0x48, 0xc3, 0x56, 0x29, 0xed, 0x9a, 0x16, 0x34, -+ 0x76, 0x59, 0x53, 0x49, 0x63, 0x92, 0x54, 0x55, 0xb1, 0x4a, -+ 0xc3, 0x3c, 0x0c, 0x21, 0x90, 0xd0, 0xf1, 0xdd, 0x26, 0xcd, -+ 0x53, 0x9d, 0xb4, 0xb2, 0xcd, 0xf2, 0xcf, 0x6b, 0x1e, 0x2e, -+ 0xd3, 0xbd, 0x5e, 0x27, 0xb3, 0x60, 0x9b, 0x50, 0xbf, 0xc8, -+ 0x5c, 0xea, 0xc7, 0x64, 0x02, 0x7b, 0x38, 0x1f, 0xcf, 0xb2, -+ 0x24, 0x06, 0x0e, 0x9d, 0x44, 0x90, 0xf2, 0x23, 0x0c, 0xff, -+ 0x4c, 0xa5, 0x13, 0xdb, 0x99, 0x6a, 0xef, 0xc4, 0xe2, 0x2e, -+ 0x60, 0xd9, 0xc1, 0x89, 0x3c, 0x71, 0xb8, 0xc8, 0x05, 0x1f, -+ 0xab, 0x86, 0x1f, 0xc7, 0xf1, 0x2e, 0x4f, 0xae, 0x06, 0xdb, -+ 0x49, 0x4f, 0x8b, 0x69, 0xe3, 0xd7, 0x2e, 0xd8, 0xb5, 0xeb, -+ 0xb4, 0xd0, 0x53, 0x86, 0x8e, 0x96, 0xd2, 0x80, 0x18, 0xda, -+ 0xe9, 0xb2, 0x8b, 0x84, 0x5d, 0xf2, 0x2f, 0x41, 0x00, 0x3b, -+ 0x78, 0xb4, 0xa0, 0xd3, 0x0b, 0x95, 0x90, 0x1c, 0x7f, 0x83, -+ 0x1b, 0xbb, 0x4c, 0xa1, 0x49, 0xc5, 0x34, 0x7e, 0xe9, 0x25, -+ 0x34, 0xa8, 0x51, 0xa5, 0xf6, 0xac, 0xd5, 0xa1, 0xaa, 0x01, -+ 0xdd, 0x64, 0xc6, 0xc4, 0xc4, 0xdb, 0x97, 0x9f, 0x8d, 0x12, -+ 0xb4, 0xda, 0xe4, 0x82, 0x5b, 0x84, 0xe7, 0xf6, 0x28, 0xe3, -+ 0x51, 0x7b, 0xe2, 0x23, 0x54, 0xe6, 0xcc, 0x7d, 0xed, 0xa1, -+ 0xc8, 0x6f, 0x4e, 0xd0, 0x42, 0x44, 0x9d, 0x10, 0x2b, 0x8a, -+ 0x00, 0xde, 0xd5, 0xf8, 0x31, 0x99, 0x38, 0x3a, 0xf8, 0x33, -+ 0xa0, 0x2e, 0x47, 0xfb, 0x6d, 0x0c, 0x41, 0xc7, 0x89, 0xbf, -+ 0x88, 0x16, 0x6f, 0x90, 0x29, 0xb5, 0x47, 0xb5, 0xe1, 0x2d, -+ 0x4b, 0xb8, 0x8e, 0xd4, 0x4c, 0x2e, 0x8f, 0x08, 0x9c, 0x78, -+ 0x5f, 0x80, 0xdb, 0x02, 0x46, 0x85, 0x18, 0xbe, 0x68, 0x04, -+ 0xe7, 0x57, 0xe6, 0x1c, 0xac, 0xec, 0x65, 0x49, 0x5e, 0x51, -+ 0x10, 0x1f, 0x37, 0x4f, 0xdb, 0x28, 0xb7, 0xa7, 0xfe, 0xbe, -+ 0x5c, 0x67, 0x9c, 0xbb, 0x3d, 0x7a, 0xa6, 0x68, 0xa3, 0x24, -+ 0x22, 0x72, 0x34, 0x2d, 0x8a, 0x94, 0x21, 0x90, 0xe1, 0x3f, -+ 0x3a, 0xc8, 0x40, 0x27, 0xd2, 0x31, 0x90, 0x0e, 0x6b, 0xd0, -+ 0xfd, 0xc9, 0x08, 0x5d, 0xe1, 0x6b, 0x0c, 0x5a, 0x7a, 0x50, -+ 0xc2, 0xa8, 0xa3, 0xd2, 0x79, 0xdd, 0xf7, 0x3d, 0xc7, 0xb8, -+ 0xd2, 0x3e, 0xf9, 0x4a, 0x1f, 0xb2, 0x79, 0x84, 0x54, 0x78, -+ 0x95, 0xc9, 0xf1, 0x12, 0x9c, 0x62, 0x5f, 0x1b, 0x81, 0x38, -+ 0x2f, 0x02, 0x06, 0x8b, 0x57, 0x8f, 0x7f, 0xfd, 0x74, 0xa6, -+ 0x4f, 0x5e, 0x2a, 0xa9, 0x0b, 0xca, 0x45, 0x51, 0xd2, 0xb0, -+ 0x0a, 0xd4, 0xbe, 0x96, 0xb1, 0x88, 0xa4, 0xb4, 0x63, 0xef, -+ 0xd2, 0xf3, 0x0c, 0x5b, 0xa6, 0x0d, 0xc3, 0xa0, 0x5f, 0x22, -+ 0x68, 0xb9, 0x11, 0x6a, 0x73, 0xab, 0x4e, 0xac, 0x44, 0x19, -+ 0xe1, 0x8e, 0x5d, 0xac, 0xcb, 0x02, 0x11, 0x00, 0x5a, 0x34, -+ 0x11, 0x6c, 0x2f, 0xdf, 0xc2, 0xda, 0x42, 0x5a, 0x76, 0xab, -+ 0x37, 0x2d, 0x63, 0x12, 0x39, 0x62, 0x25, 0x76, 0x37, 0x4c, -+ 0xc5, 0x81, 0x01, 0xb4, 0x83, 0xbc, 0xe5, 0xc2, 0xbf, 0x9b, -+ 0x26, 0xd3, 0xc4, 0x92, 0xa5, 0x09, 0x5a, 0x47, 0x31, 0xdd, -+ 0xdf, 0xd5, 0x74, 0xa1, 0xbb, 0x8b, 0x7b, 0x4d, 0x7a, 0xe4, -+ 0xbe, 0x3e, 0x6a, 0xc1, 0xaa, 0x94, 0x23, 0xc9, 0x70, 0x33, -+ 0x2d, 0x9e, 0xe3, 0x77, 0x2d, 0x24, 0xd7, 0xb6, 0xe2, 0x13, -+ 0x13, 0x8b, 0x87, 0xf3, 0x02, 0xf3, 0x89, 0x0d, 0xbe, 0x0e, -+ 0x6d, 0xfb, 0xf7, 0xb8, 0x7e, 0xa0, 0x87, 0x0c, 0xfe, 0x8a, -+ 0x61, 0x38, 0x0d, 0xaa, 0xab, 0xe3, 0x9b, 0x0f, 0xdd, 0xbb, -+ 0x61, 0xc3, 0x9b, 0x84, 0xa6, 0xac, 0x94, 0x1b, 0xba, 0x6d, -+ 0xba, 0x4c, 0x6b, 0x1d, 0xd4, 0x67, 0xc9, 0x4b, 0x7b, 0x75, -+ 0xef, 0xfb, 0xc4, 0x53, 0x79, 0x94, 0x0e, 0x6a, 0x4b, 0xc1, -+ 0x8b, 0xe9, 0xe5, 0x41, 0x6f, 0xc5, 0x64, 0x5a, 0xd1, 0xc3, -+ 0xd7, 0x47, 0xa3, 0xfb, 0x0b, 0x3f, 0x5e, 0x7c, 0x75, 0xc4, -+ 0x7e, 0xa9, 0xa3, 0x1d, 0xde, 0x36, 0xae, 0x5a, 0xaf, 0xd1, -+ 0xf3, 0x13, 0x3f, 0xd2, 0xed, 0xd9, 0xb8, 0x16, 0xfc, 0xca, -+ 0x3b, 0x6a, 0xce, 0x1b, 0xc3, 0x8a, 0xd1, 0xff, 0xe5, 0x56, -+ 0x4f, 0x39, 0x6e, 0xd9, 0x37, 0x47, 0x4a, 0x3c, 0xea, 0x70, -+ 0xfc, 0x9e, 0xc3, 0x7f, 0x0e, 0xf5, 0x16, 0xa5, 0x4e, 0x77, -+ 0xce, 0xe3, 0x93, 0x3f, 0x43, 0xfa, 0x7f, 0x21, 0x71, 0x1d, -+ 0x6f, 0x34, 0x1c, 0x05, 0x90, 0x77, 0x7e, 0x76, 0xc8, 0x21, -+ 0x1a, 0x43, 0x46, 0x33, 0xe1, 0x16, 0xd9, 0x7f, 0xa3, 0x6b, -+ 0x22, 0x1a, 0xc4, 0xfd, 0x49, 0x62, 0x74, 0xbb, 0x1f, 0xf8, -+ 0x42, 0x74, 0x4b, 0x2a, 0xaa, 0x79, 0x97, 0xed, 0x5e, 0xb9, -+ 0x09, 0x0d, 0xfb, 0x13, 0x3e, 0x3d, 0xa5, 0x28, 0x0c, 0x7e, -+ 0x6e, 0xb9, 0x69, 0x4a, 0xb9, 0xad, 0xea, 0x6d, 0x9b, 0xf8, -+ 0x16, 0xac, 0x1b, 0xa9, 0xff, 0x68, 0xdb, 0x5e, 0xd3, 0xe7, -+ 0x56, 0x9f, 0x00, 0xc4, 0xaf, 0xa1, 0x8a, 0xad, 0x5c, 0x70, -+ 0x0d, 0x4d, 0x3f, 0x92, 0xfc, 0x7a, 0x8a, 0x82, 0x24, 0x34, -+ 0xb6, 0xf8, 0xff, 0x8a, 0x76, 0xea, 0x22, 0xd0, 0x5f, 0x28, -+ 0x45, 0xd9, 0x58, 0xe4, 0x38, 0x6a, 0xc8, 0xfe, 0x6b, 0x68, -+ 0x27, 0x1b, 0xad, 0xeb, 0x32, 0x4d, 0x41, 0x88, 0xb6, 0xf7, -+ 0x02, 0xac, 0x01, 0x68, 0xda, 0xff, 0xd5, 0xac, 0x9f, 0x64, -+ 0x92, 0xa7, 0x18, 0x25, 0x6a, 0x4e, 0xf5, 0xc2, 0xd9, 0x00, -+ 0x88, 0xb2, 0xe0, 0xb8, 0xf0, 0xd0, 0xc6, 0xdb, 0x33, 0xdc, -+ 0x1e, 0x70, 0x5c, 0x63, 0x2f, 0xf4, 0xaa, 0x79, 0x97, 0xfa, -+ 0xbd, 0x42, 0x7f, 0x59, 0x8d, 0x70, 0x6d, 0x5c, 0x75, 0x39, -+ 0x30, 0x91, 0x17, 0x0a, 0x16, 0x16, 0x3d, 0x8a, 0x23, 0xd0, -+ 0x77, 0x2e, 0xfc, 0xf2, 0x0b, 0x85, 0x52, 0xae, 0x00, 0xfc, -+ 0x04, 0x90, 0xa0, 0x5b, 0x0e, 0x07, 0x77, 0x99, 0xfa, 0x32, -+ 0x94, 0x69, 0xae, 0xf9, 0x21, 0x4c, 0x6a, 0x0f, 0xf4, 0xdb, -+ 0x23, 0x8e, 0x62, 0x64, 0xa0, 0x97, 0x6d, 0x1a, 0xcb, 0x2c, -+ 0x17, 0x1c, 0x7d, 0xf2, 0xdc, 0xb6, 0x32, 0xbe, 0xfe, 0xae, -+ 0xee, 0x5b, 0xf8, 0xe5, 0x27, 0xbe, 0x1e, 0x4f, 0xf4, 0x0b, -+ 0x0f, 0xc6, 0x2b, 0xae, 0xec, 0xc0, 0xbd, 0xaa, 0x74, 0xd7, -+ 0x64, 0x08, 0x53, 0xa7, 0x57, 0x45, 0x7a, 0x7d, 0x81, 0x1a, -+ 0xf2, 0xe4, 0x61, 0x65, 0x97, 0xf5, 0x4d, 0x7c, 0x69, 0x13, -+ 0x6d, 0xea, 0x39, 0xd8, 0x52, 0x86, 0xef, 0xd1, 0x6b, 0xbe, -+ 0xf2, 0x9f, 0x18, 0x91, 0xc8, 0x3b, 0x38, 0xe6, 0x2b, 0xb1, -+ 0xe7, 0xef, 0xfc, 0x4f, 0xd7, 0x92, 0x92, 0x60, 0xdd, 0x76, -+ 0x75, 0xa6, 0x68, 0x32, 0xc5, 0x71, 0xba, 0x1f, 0x6a, 0xcb, -+ 0xe2, 0x80, 0x2e, 0xe1, 0xf0, 0x93, 0xec, 0x13, 0x44, 0xc1, -+ 0x1d, 0xc1, 0x84, 0x70, 0x0a, 0x92, 0x9f, 0xa2, 0xde, 0x42, -+ 0x76, 0x70, 0x8a, 0xf6, 0x7a, 0xcd, 0x5f, 0xb0, 0xac, 0x51, -+ 0x16, 0x56, 0xdc, 0xcf, 0x90, 0xa1, 0x7d, 0xfb, 0x13, 0xba, -+ 0x48, 0x01, 0x15, 0x90, 0x43, 0x45, 0x94, 0xcc, 0x23, 0x7d, -+ 0x85, 0x5f, 0xf7, 0xa4, 0x33, 0x80, 0xab, 0xa0, 0xde, 0x25, -+ 0x94, 0x44, 0xec, 0xac, 0x73, 0xa8, 0xb8, 0xce, 0xc9, 0x63, -+ 0x4b, 0x26, 0x43, 0xde, 0xa7, 0x97, 0x2c, 0x5a, 0xed, 0x34, -+ 0x48, 0x8c, 0xfc, 0x27, 0xec, 0x2b, 0x84, 0x8b, 0xae, 0x7c, -+ 0x4e, 0xe6, 0x51, 0xf8, 0xeb, 0xd6, 0x65, 0x04, 0xd2, 0xda, -+ 0x0b, 0x73, 0x8d, 0x2e, 0xd7, 0xa0, 0x74, 0x02, 0xf2, 0xb4, -+ 0xf4, 0x0a, 0x09, 0x06, 0xe3, 0xaa, 0xc9, 0x12, 0x64, 0xda, -+ 0xb4, 0x5c, 0x35, 0xbb, 0x4a, 0xb2, 0xb6, 0x66, 0xb8, 0x65, -+ 0x92, 0x75, 0x29, 0xdc, 0xc5, 0xe4, 0xa3, 0x2d, 0x54, 0xa3, -+ 0x33, 0xc9, 0x70, 0x9b, 0x12, 0x1e, 0x8a, 0x2e, 0x25, 0x8e, -+ 0xb6, 0x56, 0xfd, 0xf6, 0x64, 0xae, 0x2e, 0x64, 0xe2, 0x63, -+ 0x79, 0x7f, 0x3a, 0xe9, 0x4d, 0xdc, 0xf6, 0x4d, 0x29, 0x19, -+ 0xec, 0xcc, 0xc8, 0x0d, 0x96, 0x69, 0x7c, 0x7d, 0x96, 0x9f, -+ 0x34, 0xea, 0xa3, 0xd5, 0x93, 0xaa, 0x5b, 0xaa, 0xe0, 0x98, -+ 0x1f, 0xae, 0x7a, 0xf0, 0xc3, 0x33, 0x99, 0xd6, 0x85, 0x2d, -+ 0x3d, 0x3f, 0xaa, 0xd3, 0xb9, 0x41, 0x5a, 0x1f, 0xfc, 0x5d, -+ 0x90, 0x91, 0x59, 0xb6, 0x3e, 0xf9, 0xbe, 0x7f, 0xf8, 0x36, -+ 0xf1, 0x0d, 0x0d, 0xa5, 0x8b, 0x38, 0x0c, 0x77, 0x7c, 0x7e, -+ 0x8d, 0x86, 0x42, 0x3f, 0x95, 0x9e, 0x62, 0xed, 0x77, 0x30, -+ 0xbb, 0xfe, 0xba, 0x67, 0x62, 0xc5, 0xfc, 0x83, 0x76, 0xbc, -+ 0x6a, 0x52, 0xba, 0x3e, 0x33, 0x89, 0x96, 0xf8, 0xbd, 0x2e, -+ 0x67, 0x04, 0xef, 0xdf, 0xcb, 0x40, 0x9e, 0x0a, 0xb3, 0xf6, -+ 0x93, 0xd8, 0xd1, 0x15, 0x78, 0xbe, 0xdb, 0xc7, 0x31, 0x4f, -+ 0xdc, 0xea, 0x40, 0x58, 0x6b, 0xd6, 0xf1, 0xc7, 0xb4, 0x9d, -+ 0xf8, 0x0b, 0x2f, 0xf0, 0x4b, 0xb9, 0x81, 0xe4, 0x6a, 0xdf, -+ 0x09, 0x4b, 0x6e, 0x6d, 0x82, 0xb7, 0x4b, 0xea, 0xf2, 0x2d, -+ 0x89, 0xac, 0x22, 0xfa, 0x7c, 0x5e, 0xe4, 0x3a, 0xef, 0xae, -+ 0x24, 0x71, 0xca, 0x56, 0xcb, 0x2a, 0x6a, 0xd9, 0x12, 0x80, -+ 0x25, 0x79, 0xe9, 0xbd, 0x9f, 0xa1, 0x36, 0xfb, 0xf6, 0xb2, -+ 0x57, 0x36, 0xa8, 0x7e, 0x5e, 0x17, 0xb9, 0x1a, 0x60, 0x8d, -+ 0xea, 0xb3, 0x96, 0xb5, 0x52, 0xd9, 0xb3, 0xb2, 0xd5, 0x56, -+ 0x7c, 0x86, 0x60, 0x50, 0xca, 0x7b, 0x6f, 0x56, 0xd0, 0xf2, -+ 0x1a, 0xf8, 0xeb, 0x92, 0x91, 0x67, 0x52, 0x97, 0x4f, 0xda, -+ 0x6d, 0x09, 0x9f, 0x06, 0x7d, 0x25, 0xd4, 0x44, 0xbc, 0x2d, -+ 0x52, 0xc1, 0x84, 0x8b, 0xa3, 0xa8, 0x89, 0xdd, 0x54, 0xf6, -+ 0xe1, 0xc8, 0x28, 0x4f, 0xe1, 0x70, 0x5f, 0xb6, 0x9b, 0x5e, -+ 0x7c, 0x8f, 0xb8, 0x84, 0x1a, 0xdc, 0xb3, 0x06, 0xc0, 0xd2, -+ 0x9d, 0x56, 0x2b, 0xad, 0xaa, 0x55, 0x7d, 0x92, 0x9e, 0x59, -+ 0xe5, 0xfe, 0x31, 0x0c, 0x37, 0x6b, 0xc7, 0x53, 0x8a, 0x9f, -+ 0xfd, 0xc6, 0xeb, 0x51, 0xc2, 0x4a, 0xab, 0x68, 0x77, 0x82, -+ 0x97, 0x07, 0x61, 0x31, 0x54, 0xda, 0xa2, 0x92, 0x39, 0xcb, -+ 0xf7, 0xa6, 0x74, 0x95, 0xce, 0xf9, 0x97, 0x87, 0xee, 0x5a, -+ 0x2b, 0xee, 0xd2, 0x35, 0x45, 0x77, 0x68, 0xe4, 0x64, 0x91, -+ 0x88, 0x49, 0x51, 0x1a, 0xaf, 0xaa, 0xc7, 0xc7, 0x69, 0x17, -+ 0x20, 0x09, 0x3d, 0x59, 0xaf, 0x75, 0xea, 0x40, 0x1f, 0x80, -+ 0xb5, 0x9f, 0x1c, 0x1f, 0xdf, 0x6f, 0xe5, 0xfa, 0xbc, 0x27, -+ 0x62, 0xb4, 0xf1, 0x82, 0xb2, 0xa6, 0x17, 0x71, 0x46, 0xf3, -+ 0x70, 0x2b, 0xca, 0x40, 0xd7, 0x32, 0x93, 0xba, 0xff, 0x6a, -+ 0xef, 0x37, 0x01, 0x74, 0x98, 0x93, 0x0b, 0x06, 0xd8, 0xa1, -+ 0x13, 0x30, 0x9d, 0x22, 0x34, 0x73, 0x34, 0x95, 0x3f, 0xc0, -+ 0xad, 0x59, 0x11, 0x73, 0xbd, 0x99, 0x5a, 0x25, 0x5a, 0x5c, -+ 0xa3, 0x54, 0x0c, 0x8c, 0x5f, 0x20, 0x80, 0x79, 0x41, 0x52, -+ 0x49, 0x3e, 0x8f, 0x58, 0x44, 0x98, 0xc3, 0x29, 0xc3, 0x78, -+ 0xd1, 0xdf, 0x3d, 0x2e, 0x8b, 0xf5, 0xc9, 0x8a, 0x81, 0x58, -+ 0xf5, 0xd7, 0xa1, 0xac, 0xc1, 0xbc, 0xba, 0x85, 0x4e, 0x4d, -+ 0x85, 0xd5, 0x8b, 0xd2, 0x3d, 0xa7, 0x72, 0x75, 0xab, 0x26, -+ 0xe7, 0x42, 0xf3, 0xb3, 0xfe, 0xfe, 0x45, 0x65, 0xbc, 0xed, -+ 0x5f, 0x59, 0x47, 0x57, 0x08, 0x40, 0x10, 0xcb, 0x68, 0xc2, -+ 0x9f, 0x10, 0x6f, 0x4e, 0xd9, 0x62, 0x1a, 0x12, 0x3b, 0xf4, -+ 0x4b, 0x14, 0xf8, 0x94, 0xb9, 0x1d, 0xbc, 0x57, 0xfb, 0xb4, -+ 0x94, 0x95, 0xf5, 0x30, 0x64, 0xaa, 0x18, 0xb7, 0xfe, 0x0d, -+ 0xfd, 0xcd, 0x08, 0x72, 0x08, 0xd8, 0xc9, 0xbd, 0x05, 0xbc, -+ 0xb0, 0x76, 0x70, 0xb1, 0x4c, 0x32, 0xbc, 0x6e, 0x1b, 0xc9, -+ 0x11, 0xed, 0xf6, 0xa4, 0x5e, 0x72, 0xc0, 0x11, 0x65, 0xfd, -+ 0x51, 0xb0, 0xb5, 0x27, 0x46, 0x53, 0x71, 0xba, 0xca, 0x69, -+ 0x23, 0x4d, 0x08, 0x1b, 0x37, 0x10, 0x9a, 0x69, 0x31, 0x3c, -+ 0x91, 0x37, 0xbb, 0xa5, 0x2b, 0xbb, 0xdd, 0xd0, 0xd0, 0x1a, -+ 0xcb, 0x2c, 0x67, 0x23, 0xbd, 0xfa, 0xd1, 0xb3, 0x27, 0x7d, -+ 0x84, 0x66, 0xca, 0x68, 0x9b, 0xce, 0x17, 0xda, 0x37, 0xcc, -+ 0xdd, 0xdc, 0xd2, 0x2a, 0x03, 0x85, 0x37, 0x83, 0xae, 0x89, -+ 0x93, 0x8a, 0x1d, 0x16, 0x34, 0xba, 0xd1, 0x79, 0x34, 0x3e, -+ 0xed, 0xe3, 0xe9, 0xb0, 0x21, 0x16, 0xee, 0x07, 0x03, 0x53, -+ 0x45, 0x19, 0x56, 0x06, 0x7a, 0x47, 0x05, 0x03, 0x77, 0x3b, -+ 0x7a, 0x74, 0x07, 0x73, 0xc6, 0x1d, 0x4e, 0x64, 0xef, 0xae, -+ 0x33, 0x54, 0x09, 0x87, 0x73, 0x2a, 0x38, 0xba, 0x22, 0x3b, -+ 0xb4, 0x0b, 0x2c, 0x45, 0x80, 0xf9, 0xe1, 0x15, 0xb6, 0xa6, -+ 0xe7, 0xb9, 0x39, 0xf7, 0xeb, 0x18, 0xba, 0xb7, 0xf4, 0xcb, -+ 0x30, 0x60, 0xc7, 0xb0, 0x7f, 0x1a, 0x45, 0x87, 0x40, 0x85, -+ 0x93, 0xe5, 0x13, 0x59, 0x84, 0xd3, 0xf4, 0x1b, 0x6f, 0xa0, -+ 0x56, 0xfe, 0xf6, 0xae, 0x17, 0xc1, 0x47, 0x98, 0x5a, 0x3d, -+ 0x4d, 0x2e, 0x88, 0x19, 0x62, 0xae, 0x5f, 0x1e, 0x8c, 0xdf, -+ 0x9f, 0x27, 0x7a, 0xef, 0x1a, 0x69, 0x8f, 0x0c, 0xdb, 0x22, -+ 0xd0, 0xde, 0x46, 0xc6, 0x69, 0xee, 0x2f, 0x34, 0x7f, 0x74, -+ 0xdc, 0x6b, 0xf1, 0xfa, 0x5e, 0x7e, 0x7d, 0xa3, 0xd8, 0x39, -+ 0x06, 0x59, 0x65, 0xa4, 0x1c, 0xb4, 0x23, 0xc6, 0xaa, 0xdd, -+ 0x76, 0xf6, 0xbf, 0xa2, 0xc1, 0x1a, 0x26, 0x7a, 0x97, 0x11, -+ 0x06, 0x22, 0x0f, 0x2e, 0xbf, 0xee, 0x78, 0xe1, 0xba, 0xf8, -+ 0x53, 0x91, 0x64, 0x12, 0xdd, 0x12, 0x7b, 0xe5, 0x73, 0x70, -+ 0x3b, 0x45, 0x05, 0x48, 0x39, 0x8d, 0xae, 0xf2, 0xe2, 0xfd, -+ 0x6e, 0x06, 0x20, 0x1f, 0x85, 0x5f, 0xee, 0xe9, 0xfd, 0xca, -+ 0x8c, 0x52, 0x2a, 0x76, 0x45, 0xdb, 0xb2, 0xf3, 0x97, 0x7e, -+ 0x74, 0xb1, 0x61, 0x8d, 0x04, 0xe3, 0xcb, 0x48, 0xfb, 0xca, -+ 0x93, 0xe6, 0x93, 0xec, 0xd0, 0xfd, 0x96, 0xd3, 0xf4, 0xde, -+ 0x7e, 0x19, 0xcd, 0x66, 0xa3, 0xe9, 0xe2, 0xab, 0xd8, 0xff, -+ 0xed, 0xd0, 0x5e, 0x8d, 0xaf, 0x47, 0x8f, 0xf3, 0xb1, 0x5d, -+ 0x7c, 0x1c, 0xdb, 0x87, 0xd9, 0xfd, 0x87, 0xd9, 0xe8, 0x93, -+ 0x9d, 0xcc, 0xc3, 0x4a, 0xec, 0x8d, 0xbd, 0x9d, 0x8d, 0xc7, -+ 0xf6, 0xfe, 0xd6, 0x5e, 0x7f, 0x1c, 0xcd, 0x3e, 0x8c, 0x07, -+ 0x7c, 0x6e, 0x36, 0xe6, 0x13, 0x31, 0x2d, 0x2e, 0xc8, 0x46, -+ 0x04, 0xf0, 0xd4, 0xbd, 0xfc, 0x3c, 0xfe, 0x63, 0x31, 0x9e, -+ 0x2e, 0xec, 0xc3, 0x78, 0xf6, 0x69, 0xb2, 0x58, 0x80, 0xda, -+ 0xd5, 0x57, 0x3b, 0x7a, 0x78, 0x00, 0xf1, 0xd1, 0xd5, 0xdd, -+ 0xd8, 0xde, 0x8d, 0xbe, 0x40, 0x9b, 0xe3, 0x3f, 0xae, 0xc7, -+ 0x0f, 0x0b, 0xfb, 0xe5, 0xe3, 0x78, 0x6a, 0xee, 0x49, 0xfe, -+ 0xcb, 0x04, 0xfc, 0xcc, 0x17, 0x23, 0xbe, 0x30, 0x99, 0xda, -+ 0x2f, 0xb3, 0xc9, 0x62, 0x32, 0xfd, 0x20, 0x04, 0xb9, 0x85, -+ 0x3b, 0x9b, 0x7c, 0xf8, 0xb8, 0xb0, 0x1f, 0xef, 0xef, 0x6e, -+ 0xc6, 0x33, 0x59, 0xd5, 0xfd, 0x19, 0xa7, 0xcb, 0x8b, 0xf6, -+ 0x61, 0x34, 0x5b, 0x4c, 0xc6, 0x73, 0x03, 0x3e, 0x3e, 0x4f, -+ 0x6e, 0xfa, 0x42, 0xbd, 0x19, 0xcd, 0xc1, 0xf6, 0x1b, 0xfb, -+ 0x65, 0xb2, 0xf8, 0x78, 0xff, 0xb8, 0x68, 0x99, 0xa7, 0x70, -+ 0xa3, 0xe9, 0x57, 0xfb, 0xcf, 0xc9, 0xf4, 0x66, 0x60, 0xc7, -+ 0x13, 0x21, 0x34, 0xfe, 0xe3, 0x61, 0x36, 0x9e, 0x43, 0x7e, -+ 0x03, 0xda, 0x93, 0x4f, 0xe0, 0x78, 0x8c, 0x2f, 0x27, 0xd3, -+ 0xeb, 0xbb, 0xc7, 0x1b, 0xd9, 0x02, 0xbe, 0x02, 0x85, 0xe9, -+ 0xfd, 0x02, 0x7a, 0x82, 0x64, 0xe0, 0x73, 0x71, 0x2f, 0xaa, -+ 0x09, 0xcf, 0x06, 0xea, 0x60, 0x06, 0xf4, 0xcd, 0xa7, 0xf1, -+ 0x0c, 0xfa, 0x9b, 0x2e, 0x46, 0x57, 0x93, 0xbb, 0x09, 0x8e, -+ 0xe4, 0xda, 0xf0, 0xed, 0x64, 0x31, 0xc5, 0x11, 0xb2, 0x5c, -+ 0x3c, 0x52, 0xce, 0xaf, 0x1f, 0xef, 0x46, 0x10, 0xe2, 0x71, -+ 0xf6, 0x70, 0x3f, 0x1f, 0x73, 0x7c, 0x43, 0x15, 0x82, 0x08, -+ 0x14, 0x3e, 0x9b, 0xcc, 0xff, 0x69, 0x47, 0x73, 0xe3, 0x15, -+ 0xfb, 0xfb, 0xe3, 0xa8, 0x25, 0x04, 0xed, 0x82, 0xc6, 0xa7, -+ 0xd1, 0xf4, 0x5a, 0x0c, 0x75, 0x64, 0x48, 0x8a, 0x6b, 0xbf, -+ 0xde, 0x3f, 0xb2, 0x6a, 0x40, 0xee, 0xbb, 0x1b, 0x3e, 0x60, -+ 0xc2, 0x03, 0x54, 0xd4, 0xd8, 0xde, 0x8c, 0x6f, 0xc7, 0xd7, -+ 0x8b, 0xc9, 0x67, 0x98, 0x17, 0x4f, 0xe2, 0x98, 0xf9, 0xe3, -+ 0xa7, 0xb1, 0xd7, 0xf7, 0x7c, 0x21, 0x0a, 0xba, 0xbb, 0xb3, -+ 0xd3, 0xf1, 0x35, 0xf8, 0x1d, 0xcd, 0xbe, 0xda, 0xf9, 0x78, -+ 0xf6, 0x79, 0x72, 0x4d, 0x3d, 0x98, 0xd9, 0xf8, 0x61, 0x34, -+ 0x81, 0xfa, 0xb9, 0x20, 0x3d, 0x9b, 0x91, 0xca, 0xfd, 0x54, -+ 0x73, 0xcb, 0xbb, 0x21, 0x8d, 0x07, 0x2f, 0x19, 0x7f, 0xa6, -+ 0x0f, 0x3c, 0x4e, 0xef, 0x28, 0xed, 0x6c, 0xfc, 0xfb, 0x23, -+ 0xe4, 0x39, 0xe3, 0x09, 0xa4, 0x31, 0xfa, 0x00, 0x6f, 0xa3, -+ 0x32, 0x23, 0xbb, 0x9b, 0x2f, 0x13, 0x1c, 0x4e, 0x0b, 0x1d, -+ 0x1b, 0x7f, 0x20, 0xaf, 0xe0, 0x8b, 0xce, 0xf8, 0x5f, 0xe1, -+ 0x46, 0xf7, 0xf6, 0xd3, 0xe8, 0xab, 0x6e, 0x65, 0x7f, 0xf5, -+ 0xee, 0x01, 0x36, 0xdb, 0xb5, 0xed, 0xbe, 0x57, 0xc0, 0x29, -+ 0x3a, 0xef, 0x1c, 0x5d, 0xdd, 0x53, 0x07, 0x57, 0xe0, 0x67, -+ 0x22, 0x6c, 0x81, 0x11, 0x2a, 0x84, 0x26, 0xba, 0x19, 0x7d, -+ 0x1a, 0x7d, 0x18, 0xcf, 0x07, 0xa6, 0x75, 0x02, 0x39, 0xda, -+ 0x6f, 0x92, 0x0f, 0xec, 0xfc, 0x61, 0x7c, 0x3d, 0xe1, 0x5f, -+ 0xf0, 0x3d, 0x5c, 0x0f, 0xb6, 0xbe, 0x53, 0xad, 0x20, 0x8a, -+ 0x7e, 0x7f, 0xa4, 0x15, 0xf1, 0x81, 0x27, 0x62, 0x47, 0x30, -+ 0x27, 0x45, 0xa3, 0x1f, 0x7a, 0x93, 0x31, 0x06, 0xe9, 0x6b, -+ 0xd3, 0xe0, 0x23, 0x38, 0xfb, 0x38, 0x2e, 0x2f, 0xba, 0xb3, -+ 0x8f, 0xfc, 0x8f, 0x7e, 0x71, 0x77, 0x3f, 0xa7, 0xb3, 0xe1, -+ 0x90, 0xc5, 0xc8, 0x0a, 0xc7, 0xf8, 0xf3, 0x6a, 0xcc, 0xa7, -+ 0x67, 0xe3, 0x29, 0xf4, 0x25, 0xe1, 0x34, 0xba, 0xbe, 0x7e, -+ 0x9c, 0x21, 0xb4, 0xf8, 0x04, 0xdf, 0x00, 0x37, 0xf3, 0x47, -+ 0x04, 0xdb, 0x64, 0x2a, 0x46, 0x31, 0x94, 0x57, 0xa2, 0x79, -+ 0x32, 0xbb, 0x09, 0xf1, 0x24, 0x7a, 0xb6, 0xb7, 0xa3, 0xc9, -+ 0xdd, 0xe3, 0xec, 0xc4, 0xc7, 0x70, 0xf2, 0x3d, 0x54, 0x48, -+ 0x92, 0xe2, 0x6b, 0xad, 0x41, 0x82, 0x93, 0xcd, 0x2f, 0x07, -+ 0xe2, 0x03, 0x76, 0x72, 0x8b, 0xa3, 0xae, 0x3f, 0x7a, 0xeb, -+ 0xd9, 0x5e, 0xd4, 0x7e, 0xb5, 0x1f, 0x61, 0x8a, 0xab, 0x31, -+ 0x1e, 0x1b, 0xdd, 0x7c, 0x9e, 0x30, 0xf3, 0xe8, 0x39, 0x06, -+ 0xb1, 0x30, 0x9f, 0x78, 0x9d, 0xdc, 0x7b, 0x0a, 0x5e, 0x8f, -+ 0xed, 0x4e, 0x3f, 0xa2, 0x44, 0x9f, 0x3f, 0xb3, 0xbd, 0x6f, -+ 0xfe, 0x17, 0x84, 0xf3, 0x1b, 0xef, 0x12, 0x3b, 0x00, 0x00, -+ -+}; -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -110,6 +110,7 @@ - CFG_CMD_MMC | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ -+ CFG_CMD_LICENSE | \ - 0) - /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - #include <cmd_confdefs.h> -Index: u-boot/include/configs/hxd8.h -=================================================================== ---- u-boot.orig/include/configs/hxd8.h -+++ u-boot/include/configs/hxd8.h -@@ -110,6 +110,7 @@ - CFG_CMD_MMC | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ -+ CFG_CMD_LICENSE | \ - 0) - /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - #include <cmd_confdefs.h> -Index: u-boot/include/configs/smdk2440.h -=================================================================== ---- u-boot.orig/include/configs/smdk2440.h -+++ u-boot/include/configs/smdk2440.h -@@ -110,6 +110,7 @@ - CFG_CMD_PORTIO | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SAVES | \ -+ CFG_CMD_LICENSE | \ - CFG_CMD_USB) - - /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-machtypes.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-machtypes.patch deleted file mode 100644 index db3cee6e99..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-machtypes.patch +++ /dev/null @@ -1,4121 +0,0 @@ -This adds a more recent version of mach-types.h to u-boot - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/include/asm-arm/mach-types.h -=================================================================== ---- u-boot.orig/include/asm-arm/mach-types.h -+++ u-boot/include/asm-arm/mach-types.h -@@ -424,7 +424,7 @@ - #define MACH_TYPE_MPORT3S 411 - #define MACH_TYPE_RA_ALPHA 412 - #define MACH_TYPE_XCEP 413 --#define MACH_TYPE_ARCOM_MERCURY 414 -+#define MACH_TYPE_ARCOM_VULCAN 414 - #define MACH_TYPE_STARGATE 415 - #define MACH_TYPE_ARMADILLOJ 416 - #define MACH_TYPE_ELROY_JACK 417 -@@ -457,7 +457,7 @@ - #define MACH_TYPE_XM250 444 - #define MACH_TYPE_T6TC1XB 445 - #define MACH_TYPE_ESS710 446 --#define MACH_TYPE_MX3ADS 447 -+#define MACH_TYPE_MX31ADS 447 - #define MACH_TYPE_HIMALAYA 448 - #define MACH_TYPE_BOLFENK 449 - #define MACH_TYPE_AT91RM9200KR 450 -@@ -736,7 +736,311 @@ - #define MACH_TYPE_LN2410SBC 725 - #define MACH_TYPE_CB3RUFC 726 - #define MACH_TYPE_MP2USB 727 --#define MACH_TYPE_PDNB3 1002 -+#define MACH_TYPE_NTNP425C 728 -+#define MACH_TYPE_COLIBRI 729 -+#define MACH_TYPE_PCM7220 730 -+#define MACH_TYPE_GATEWAY7001 731 -+#define MACH_TYPE_PCM027 732 -+#define MACH_TYPE_CMPXA 733 -+#define MACH_TYPE_ANUBIS 734 -+#define MACH_TYPE_ITE8152 735 -+#define MACH_TYPE_LPC3XXX 736 -+#define MACH_TYPE_PUPPETEER 737 -+#define MACH_TYPE_MACH_VADATECH 738 -+#define MACH_TYPE_E570 739 -+#define MACH_TYPE_X50 740 -+#define MACH_TYPE_RECON 741 -+#define MACH_TYPE_XBOARDGP8 742 -+#define MACH_TYPE_FPIC2 743 -+#define MACH_TYPE_AKITA 744 -+#define MACH_TYPE_A81 745 -+#define MACH_TYPE_SVM_SC25X 746 -+#define MACH_TYPE_VADATECH020 747 -+#define MACH_TYPE_TLI 748 -+#define MACH_TYPE_EDB9315LC 749 -+#define MACH_TYPE_PASSEC 750 -+#define MACH_TYPE_DS_TIGER 751 -+#define MACH_TYPE_E310 752 -+#define MACH_TYPE_E330 753 -+#define MACH_TYPE_RT3000 754 -+#define MACH_TYPE_NOKIA770 755 -+#define MACH_TYPE_PNX0106 756 -+#define MACH_TYPE_HX21XX 757 -+#define MACH_TYPE_FARADAY 758 -+#define MACH_TYPE_SBC9312 759 -+#define MACH_TYPE_BATMAN 760 -+#define MACH_TYPE_JPD201 761 -+#define MACH_TYPE_MIPSA 762 -+#define MACH_TYPE_KACOM 763 -+#define MACH_TYPE_SWARCOCPU 764 -+#define MACH_TYPE_SWARCODSL 765 -+#define MACH_TYPE_BLUEANGEL 766 -+#define MACH_TYPE_HAIRYGRAMA 767 -+#define MACH_TYPE_BANFF 768 -+#define MACH_TYPE_CARMEVA 769 -+#define MACH_TYPE_SAM255 770 -+#define MACH_TYPE_PPM10 771 -+#define MACH_TYPE_EDB9315A 772 -+#define MACH_TYPE_SUNSET 773 -+#define MACH_TYPE_STARGATE2 774 -+#define MACH_TYPE_INTELMOTE2 775 -+#define MACH_TYPE_TRIZEPS4 776 -+#define MACH_TYPE_MAINSTONE2 777 -+#define MACH_TYPE_EZ_IXP42X 778 -+#define MACH_TYPE_TAPWAVE_ZODIAC 779 -+#define MACH_TYPE_UNIVERSALMETER 780 -+#define MACH_TYPE_HICOARM9 781 -+#define MACH_TYPE_PNX4008 782 -+#define MACH_TYPE_KWS6000 783 -+#define MACH_TYPE_PORTUX920T 784 -+#define MACH_TYPE_EZ_X5 785 -+#define MACH_TYPE_OMAP_RUDOLPH 786 -+#define MACH_TYPE_CPUAT91 787 -+#define MACH_TYPE_REA9200 788 -+#define MACH_TYPE_ACTS_PUNE_SA1110 789 -+#define MACH_TYPE_IXP425 790 -+#define MACH_TYPE_ARGONPLUSODYSSEY 791 -+#define MACH_TYPE_PERCH 792 -+#define MACH_TYPE_EIS05R1 793 -+#define MACH_TYPE_PEPPERPAD 794 -+#define MACH_TYPE_SB3010 795 -+#define MACH_TYPE_RM9200 796 -+#define MACH_TYPE_DMA03 797 -+#define MACH_TYPE_ROAD_S101 798 -+#define MACH_TYPE_IQ_NEXTGEN_A 799 -+#define MACH_TYPE_IQ_NEXTGEN_B 800 -+#define MACH_TYPE_IQ_NEXTGEN_C 801 -+#define MACH_TYPE_IQ_NEXTGEN_D 802 -+#define MACH_TYPE_IQ_NEXTGEN_E 803 -+#define MACH_TYPE_MALLOW_AT91 804 -+#define MACH_TYPE_CYBERTRACKER_I 805 -+#define MACH_TYPE_GESBC931X 806 -+#define MACH_TYPE_CENTIPAD 807 -+#define MACH_TYPE_ARMSOC 808 -+#define MACH_TYPE_SE4200 809 -+#define MACH_TYPE_EMS197A 810 -+#define MACH_TYPE_MICRO9 811 -+#define MACH_TYPE_MICRO9L 812 -+#define MACH_TYPE_UC5471DSP 813 -+#define MACH_TYPE_SJ5471ENG 814 -+#define MACH_TYPE_CMPXA26X 815 -+#define MACH_TYPE_NC 816 -+#define MACH_TYPE_OMAP_PALMTE 817 -+#define MACH_TYPE_AJAX52X 818 -+#define MACH_TYPE_SIRIUSTAR 819 -+#define MACH_TYPE_IODATA_HDLG 820 -+#define MACH_TYPE_AT91RM9200UTL 821 -+#define MACH_TYPE_BIOSAFE 822 -+#define MACH_TYPE_MP1000 823 -+#define MACH_TYPE_PARSY 824 -+#define MACH_TYPE_CCXP 825 -+#define MACH_TYPE_OMAP_GSAMPLE 826 -+#define MACH_TYPE_REALVIEW_EB 827 -+#define MACH_TYPE_SAMOA 828 -+#define MACH_TYPE_T3XSCALE 829 -+#define MACH_TYPE_I878 830 -+#define MACH_TYPE_BORZOI 831 -+#define MACH_TYPE_GECKO 832 -+#define MACH_TYPE_DS101 833 -+#define MACH_TYPE_OMAP_PALMTT2 834 -+#define MACH_TYPE_XSCALE_PALMLD 835 -+#define MACH_TYPE_CC9C 836 -+#define MACH_TYPE_SBC1670 837 -+#define MACH_TYPE_IXDP28X5 838 -+#define MACH_TYPE_OMAP_PALMTT 839 -+#define MACH_TYPE_ML696K 840 -+#define MACH_TYPE_ARCOM_ZEUS 841 -+#define MACH_TYPE_OSIRIS 842 -+#define MACH_TYPE_MAESTRO 843 -+#define MACH_TYPE_TUNGE2 844 -+#define MACH_TYPE_IXBBM 845 -+#define MACH_TYPE_MX27 846 -+#define MACH_TYPE_AX8004 847 -+#define MACH_TYPE_AT91SAM9261EK 848 -+#define MACH_TYPE_LOFT 849 -+#define MACH_TYPE_MAGPIE 850 -+#define MACH_TYPE_MX21 851 -+#define MACH_TYPE_MB87M3400 852 -+#define MACH_TYPE_MGUARD_DELTA 853 -+#define MACH_TYPE_DAVINCI_DVDP 854 -+#define MACH_TYPE_HTCUNIVERSAL 855 -+#define MACH_TYPE_TPAD 856 -+#define MACH_TYPE_ROVERP3 857 -+#define MACH_TYPE_JORNADA928 858 -+#define MACH_TYPE_MV88FXX81 859 -+#define MACH_TYPE_STMP36XX 860 -+#define MACH_TYPE_SXNI79524 861 -+#define MACH_TYPE_AMS_DELTA 862 -+#define MACH_TYPE_URANIUM 863 -+#define MACH_TYPE_UCON 864 -+#define MACH_TYPE_NAS100D 865 -+#define MACH_TYPE_L083_1000 866 -+#define MACH_TYPE_EZX 867 -+#define MACH_TYPE_PNX5220 868 -+#define MACH_TYPE_BUTTE 869 -+#define MACH_TYPE_SRM2 870 -+#define MACH_TYPE_DSBR 871 -+#define MACH_TYPE_CRYSTALBALL 872 -+#define MACH_TYPE_TINYPXA27X 873 -+#define MACH_TYPE_HERBIE 874 -+#define MACH_TYPE_MAGICIAN 875 -+#define MACH_TYPE_CM4002 876 -+#define MACH_TYPE_B4 877 -+#define MACH_TYPE_MAUI 878 -+#define MACH_TYPE_CYBERTRACKER_G 879 -+#define MACH_TYPE_NXDKN 880 -+#define MACH_TYPE_MIO8390 881 -+#define MACH_TYPE_OMI_BOARD 882 -+#define MACH_TYPE_MX21CIV 883 -+#define MACH_TYPE_MAHI_CDAC 884 -+#define MACH_TYPE_XSCALE_PALMTX 885 -+#define MACH_TYPE_S3C2413 887 -+#define MACH_TYPE_SAMSYS_EP0 888 -+#define MACH_TYPE_WG302V1 889 -+#define MACH_TYPE_WG302V2 890 -+#define MACH_TYPE_EB42X 891 -+#define MACH_TYPE_IQ331ES 892 -+#define MACH_TYPE_COSYDSP 893 -+#define MACH_TYPE_UPLAT7D 894 -+#define MACH_TYPE_PTDAVINCI 895 -+#define MACH_TYPE_MBUS 896 -+#define MACH_TYPE_NADIA2VB 897 -+#define MACH_TYPE_R1000 898 -+#define MACH_TYPE_HW90250 899 -+#define MACH_TYPE_OMAP_2430SDP 900 -+#define MACH_TYPE_DAVINCI_EVM 901 -+#define MACH_TYPE_OMAP_TORNADO 902 -+#define MACH_TYPE_OLOCREEK 903 -+#define MACH_TYPE_PALMZ72 904 -+#define MACH_TYPE_NXDB500 905 -+#define MACH_TYPE_APF9328 906 -+#define MACH_TYPE_OMAP_WIPOQ 907 -+#define MACH_TYPE_OMAP_TWIP 908 -+#define MACH_TYPE_XSCALE_PALMTREO650 909 -+#define MACH_TYPE_ACUMEN 910 -+#define MACH_TYPE_XP100 911 -+#define MACH_TYPE_FS2410 912 -+#define MACH_TYPE_PXA270_CERF 913 -+#define MACH_TYPE_SQ2FTLPALM 914 -+#define MACH_TYPE_BSEMSERVER 915 -+#define MACH_TYPE_NETCLIENT 916 -+#define MACH_TYPE_XSCALE_PALMTT5 917 -+#define MACH_TYPE_OMAP_PALMTC 918 -+#define MACH_TYPE_OMAP_APOLLON 919 -+#define MACH_TYPE_ARGONLVEVB 920 -+#define MACH_TYPE_REA_2D 921 -+#define MACH_TYPE_TI3E524 922 -+#define MACH_TYPE_ATEB9200 923 -+#define MACH_TYPE_AUCKLAND 924 -+#define MACH_TYPE_AK3320M 925 -+#define MACH_TYPE_DURAMAX 926 -+#define MACH_TYPE_N35 927 -+#define MACH_TYPE_PRONGHORN 928 -+#define MACH_TYPE_FUNDY 929 -+#define MACH_TYPE_LOGICPD_PXA270 930 -+#define MACH_TYPE_CPU777 931 -+#define MACH_TYPE_SIMICON9201 932 -+#define MACH_TYPE_LEAP2_HPM 933 -+#define MACH_TYPE_CM922TXA10 934 -+#define MACH_TYPE_PXA 935 -+#define MACH_TYPE_SANDGATE2 936 -+#define MACH_TYPE_SANDGATE2G 937 -+#define MACH_TYPE_SANDGATE2P 938 -+#define MACH_TYPE_FRED_JACK 939 -+#define MACH_TYPE_TTG_COLOR1 940 -+#define MACH_TYPE_NXEB500HMI 941 -+#define MACH_TYPE_NETDCU8 942 -+#define MACH_TYPE_ML675050_CPU_BOA 943 -+#define MACH_TYPE_NG_FVX538 944 -+#define MACH_TYPE_NG_FVS338 945 -+#define MACH_TYPE_PNX4103 946 -+#define MACH_TYPE_HESDB 947 -+#define MACH_TYPE_XSILO 948 -+#define MACH_TYPE_ESPRESSO 949 -+#define MACH_TYPE_EMLC 950 -+#define MACH_TYPE_SISTERON 951 -+#define MACH_TYPE_RX1950 952 -+#define MACH_TYPE_TSC_VENUS 953 -+#define MACH_TYPE_DS101J 954 -+#define MACH_TYPE_MXC30030ADS 955 -+#define MACH_TYPE_FUJITSU_WIMAXSOC 956 -+#define MACH_TYPE_DUALPCMODEM 957 -+#define MACH_TYPE_GESBC9312 958 -+#define MACH_TYPE_HTCAPACHE 959 -+#define MACH_TYPE_IXDP435 960 -+#define MACH_TYPE_CATPROVT100 961 -+#define MACH_TYPE_PICOTUX1XX 962 -+#define MACH_TYPE_PICOTUX2XX 963 -+#define MACH_TYPE_DSMG600 964 -+#define MACH_TYPE_EMPC2 965 -+#define MACH_TYPE_VENTURA 966 -+#define MACH_TYPE_PHIDGET_SBC 967 -+#define MACH_TYPE_IJ3K 968 -+#define MACH_TYPE_PISGAH 969 -+#define MACH_TYPE_OMAP_FSAMPLE 970 -+#define MACH_TYPE_SG720 971 -+#define MACH_TYPE_REDFOX 972 -+#define MACH_TYPE_MYSH_EP9315_1 973 -+#define MACH_TYPE_TPF106 974 -+#define MACH_TYPE_AT91RM9200KG 975 -+#define MACH_TYPE_SLEDB 976 -+#define MACH_TYPE_ONTRACK 977 -+#define MACH_TYPE_PM1200 978 -+#define MACH_TYPE_ESS24XXX 979 -+#define MACH_TYPE_COREMP7 980 -+#define MACH_TYPE_NEXCODER_6446 981 -+#define MACH_TYPE_STVC8380 982 -+#define MACH_TYPE_TEKLYNX 983 -+#define MACH_TYPE_CARBONADO 984 -+#define MACH_TYPE_SYSMOS_MP730 985 -+#define MACH_TYPE_SNAPPER_CL15 986 -+#define MACH_TYPE_PGIGIM 987 -+#define MACH_TYPE_PTX9160P2 988 -+#define MACH_TYPE_DCORE1 989 -+#define MACH_TYPE_VICTORPXA 990 -+#define MACH_TYPE_MX2DTB 991 -+#define MACH_TYPE_PXA_IREX_ER0100 992 -+#define MACH_TYPE_OMAP_PALMZ71 993 -+#define MACH_TYPE_BARTEC_DEG 994 -+#define MACH_TYPE_HW50251 995 -+#define MACH_TYPE_IBOX 996 -+#define MACH_TYPE_ATLASLH7A404 997 -+#define MACH_TYPE_PT2026 998 -+#define MACH_TYPE_HTCALPINE 999 -+#define MACH_TYPE_BARTEC_VTU 1000 -+#define MACH_TYPE_VCOREII 1001 -+#define MACH_TYPE_PDNB3 1002 -+#define MACH_TYPE_HTCBEETLES 1003 -+#define MACH_TYPE_S3C6400 1004 -+#define MACH_TYPE_S3C2443 1005 -+#define MACH_TYPE_OMAP_LDK 1006 -+#define MACH_TYPE_SMDK2460 1007 -+#define MACH_TYPE_SMDK2440 1008 -+#define MACH_TYPE_SMDK2412 1009 -+#define MACH_TYPE_WEBBOX 1010 -+#define MACH_TYPE_CWWNDP 1011 -+#define MACH_TYPE_DRAGON 1012 -+#define MACH_TYPE_OPENDO_CPU_BOARD 1013 -+#define MACH_TYPE_CCM2200 1014 -+#define MACH_TYPE_ETWARM 1015 -+#define MACH_TYPE_M93030 1016 -+#define MACH_TYPE_CC7U 1017 -+#define MACH_TYPE_MTT_RANGER 1018 -+#define MACH_TYPE_NEXUS 1019 -+#define MACH_TYPE_DESMAN 1020 -+#define MACH_TYPE_BKDE303 1021 -+#define MACH_TYPE_SMDK2413 1022 -+#define MACH_TYPE_AML_M7200 1023 -+#define MACH_TYPE_AML_M5900 1024 -+#define MACH_TYPE_SG640 1025 -+#define MACH_TYPE_EDG79524 1026 -+#define MACH_TYPE_AI2410 1027 -+#define MACH_TYPE_IXP465 1028 -+#define MACH_TYPE_BALLOON3 1029 -+#define MACH_TYPE_QT2410 1108 -+#define MACH_TYPE_NEO1973_GTA01 1182 -+#define MACH_TYPE_HXD8 1303 -+#define MACH_TYPE_NEO1973_GTA02 1304 - - #ifdef CONFIG_ARCH_EBSA110 - # ifdef machine_arch_type -@@ -3541,9 +3845,9 @@ - # else - # define machine_arch_type MACH_TYPE_RAMSES - # endif --# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES) -+# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES) - #else --# define machine_is_ramses() (0) -+# define machine_is_mnci() (0) - #endif - - #ifdef CONFIG_ARCH_S28X -@@ -4501,9 +4805,9 @@ - # else - # define machine_arch_type MACH_TYPE_M825XX - # endif --# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX) -+# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX) - #else --# define machine_is_m825xx() (0) -+# define machine_is_comcerto() (0) - #endif - - #ifdef CONFIG_SA1100_M7100 -@@ -5658,16 +5962,16 @@ - # define machine_is_xcep() (0) - #endif - --#ifdef CONFIG_MACH_ARCOM_MERCURY -+#ifdef CONFIG_MACH_ARCOM_VULCAN - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_ARCOM_MERCURY -+# define machine_arch_type MACH_TYPE_ARCOM_VULCAN - # endif --# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY) -+# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN) - #else --# define machine_is_arcom_mercury() (0) -+# define machine_is_arcom_vulcan() (0) - #endif - - #ifdef CONFIG_MACH_STARGATE -@@ -6054,16 +6358,16 @@ - # define machine_is_ess710() (0) - #endif - --#ifdef CONFIG_MACH_MX3ADS -+#ifdef CONFIG_MACH_MX31ADS - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_MX3ADS -+# define machine_arch_type MACH_TYPE_MX31ADS - # endif --# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS) -+# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS) - #else --# define machine_is_mx3ads() (0) -+# define machine_is_mx31ads() (0) - #endif - - #ifdef CONFIG_MACH_HIMALAYA -@@ -7333,9 +7637,9 @@ - # else - # define machine_arch_type MACH_TYPE_ARGONPLUSEVB - # endif --# define machine_is_argonplusevb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) -+# define machine_is_i30030evb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) - #else --# define machine_is_argonplusevb() (0) -+# define machine_is_i30030evb() (0) - #endif - - #ifdef CONFIG_MACH_SCMA11EVB -@@ -7345,9 +7649,9 @@ - # else - # define machine_arch_type MACH_TYPE_SCMA11EVB - # endif --# define machine_is_scma11evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) -+# define machine_is_mxc27530evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) - #else --# define machine_is_scma11evb() (0) -+# define machine_is_mxc27530evb() (0) - #endif - - #ifdef CONFIG_MACH_SMDK2800 -@@ -8305,9 +8609,9 @@ - # else - # define machine_arch_type MACH_TYPE_SCMA11BB - # endif --# define machine_is_scma11bb() (machine_arch_type == MACH_TYPE_SCMA11BB) -+# define machine_is_mxc27530ads() (machine_arch_type == MACH_TYPE_SCMA11BB) - #else --# define machine_is_scma11bb() (0) -+# define machine_is_mxc27530ads() (0) - #endif - - #ifdef CONFIG_MACH_TRIZEPS3 -@@ -9193,9 +9497,9 @@ - # else - # define machine_arch_type MACH_TYPE_ZEUSEVB - # endif --# define machine_is_zeusevb() (machine_arch_type == MACH_TYPE_ZEUSEVB) -+# define machine_is_mxc91131evb() (machine_arch_type == MACH_TYPE_ZEUSEVB) - #else --# define machine_is_zeusevb() (0) -+# define machine_is_mxc91131evb() (0) - #endif - - #ifdef CONFIG_MACH_P700 -@@ -9402,6 +9706,3667 @@ - # define machine_is_mp2usb() (0) - #endif - -+#ifdef CONFIG_MACH_NTNP425C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NTNP425C -+# endif -+# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C) -+#else -+# define machine_is_ntnp425c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COLIBRI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COLIBRI -+# endif -+# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI) -+#else -+# define machine_is_colibri() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PCM7220 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PCM7220 -+# endif -+# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220) -+#else -+# define machine_is_pcm7220() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GATEWAY7001 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GATEWAY7001 -+# endif -+# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001) -+#else -+# define machine_is_gateway7001() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PCM027 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PCM027 -+# endif -+# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027) -+#else -+# define machine_is_pcm027() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CMPXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CMPXA -+# endif -+# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA) -+#else -+# define machine_is_cmpxa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ANUBIS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ANUBIS -+# endif -+# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS) -+#else -+# define machine_is_anubis() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ITE8152 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ITE8152 -+# endif -+# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152) -+#else -+# define machine_is_ite8152() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LPC3XXX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LPC3XXX -+# endif -+# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX) -+#else -+# define machine_is_lpc3xxx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PUPPETEER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PUPPETEER -+# endif -+# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER) -+#else -+# define machine_is_puppeteer() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MACH_VADATECH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MACH_VADATECH -+# endif -+# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH) -+#else -+# define machine_is_vt001() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E570 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E570 -+# endif -+# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570) -+#else -+# define machine_is_e570() (0) -+#endif -+ -+#ifdef CONFIG_MACH_X50 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_X50 -+# endif -+# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50) -+#else -+# define machine_is_x50() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RECON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RECON -+# endif -+# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON) -+#else -+# define machine_is_recon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XBOARDGP8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XBOARDGP8 -+# endif -+# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8) -+#else -+# define machine_is_xboardgp8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FPIC2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FPIC2 -+# endif -+# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2) -+#else -+# define machine_is_fpic2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AKITA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AKITA -+# endif -+# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA) -+#else -+# define machine_is_akita() (0) -+#endif -+ -+#ifdef CONFIG_MACH_A81 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_A81 -+# endif -+# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81) -+#else -+# define machine_is_a81() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SVM_SC25X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SVM_SC25X -+# endif -+# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X) -+#else -+# define machine_is_svm_sc25x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VADATECH020 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VADATECH020 -+# endif -+# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020) -+#else -+# define machine_is_vt020() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TLI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TLI -+# endif -+# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI) -+#else -+# define machine_is_tli() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDB9315LC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDB9315LC -+# endif -+# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC) -+#else -+# define machine_is_edb9315lc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PASSEC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PASSEC -+# endif -+# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC) -+#else -+# define machine_is_passec() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS_TIGER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS_TIGER -+# endif -+# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER) -+#else -+# define machine_is_ds_tiger() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E310 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E310 -+# endif -+# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310) -+#else -+# define machine_is_e310() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E330 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E330 -+# endif -+# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330) -+#else -+# define machine_is_e330() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RT3000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RT3000 -+# endif -+# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000) -+#else -+# define machine_is_rt3000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NOKIA770 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NOKIA770 -+# endif -+# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770) -+#else -+# define machine_is_nokia770() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX0106 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX0106 -+# endif -+# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106) -+#else -+# define machine_is_pnx0106() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HX21XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HX21XX -+# endif -+# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX) -+#else -+# define machine_is_hx21xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FARADAY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FARADAY -+# endif -+# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY) -+#else -+# define machine_is_faraday() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SBC9312 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SBC9312 -+# endif -+# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312) -+#else -+# define machine_is_sbc9312() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BATMAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BATMAN -+# endif -+# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN) -+#else -+# define machine_is_batman() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JPD201 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JPD201 -+# endif -+# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201) -+#else -+# define machine_is_jpd201() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MIPSA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MIPSA -+# endif -+# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA) -+#else -+# define machine_is_mipsa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_KACOM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_KACOM -+# endif -+# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM) -+#else -+# define machine_is_kacom() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SWARCOCPU -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SWARCOCPU -+# endif -+# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU) -+#else -+# define machine_is_swarcocpu() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SWARCODSL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SWARCODSL -+# endif -+# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL) -+#else -+# define machine_is_swarcodsl() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BLUEANGEL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BLUEANGEL -+# endif -+# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL) -+#else -+# define machine_is_blueangel() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HAIRYGRAMA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HAIRYGRAMA -+# endif -+# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA) -+#else -+# define machine_is_hairygrama() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BANFF -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BANFF -+# endif -+# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF) -+#else -+# define machine_is_banff() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CARMEVA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CARMEVA -+# endif -+# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA) -+#else -+# define machine_is_carmeva() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAM255 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAM255 -+# endif -+# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255) -+#else -+# define machine_is_sam255() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PPM10 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PPM10 -+# endif -+# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10) -+#else -+# define machine_is_ppm10() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDB9315A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDB9315A -+# endif -+# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A) -+#else -+# define machine_is_edb9315a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SUNSET -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SUNSET -+# endif -+# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET) -+#else -+# define machine_is_sunset() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STARGATE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STARGATE2 -+# endif -+# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2) -+#else -+# define machine_is_stargate2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_INTELMOTE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_INTELMOTE2 -+# endif -+# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2) -+#else -+# define machine_is_intelmote2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TRIZEPS4 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TRIZEPS4 -+# endif -+# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4) -+#else -+# define machine_is_trizeps4() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAINSTONE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAINSTONE2 -+# endif -+# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2) -+#else -+# define machine_is_mainstone2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZ_IXP42X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZ_IXP42X -+# endif -+# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X) -+#else -+# define machine_is_ez_ixp42x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TAPWAVE_ZODIAC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC -+# endif -+# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC) -+#else -+# define machine_is_tapwave_zodiac() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UNIVERSALMETER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UNIVERSALMETER -+# endif -+# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER) -+#else -+# define machine_is_universalmeter() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HICOARM9 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HICOARM9 -+# endif -+# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9) -+#else -+# define machine_is_hicoarm9() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX4008 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX4008 -+# endif -+# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008) -+#else -+# define machine_is_pnx4008() (0) -+#endif -+ -+#ifdef CONFIG_MACH_KWS6000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_KWS6000 -+# endif -+# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000) -+#else -+# define machine_is_kws6000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PORTUX920T -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PORTUX920T -+# endif -+# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T) -+#else -+# define machine_is_portux920t() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZ_X5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZ_X5 -+# endif -+# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5) -+#else -+# define machine_is_ez_x5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_RUDOLPH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH -+# endif -+# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH) -+#else -+# define machine_is_omap_rudolph() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CPUAT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CPUAT91 -+# endif -+# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91) -+#else -+# define machine_is_cpuat91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REA9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REA9200 -+# endif -+# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200) -+#else -+# define machine_is_rea9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACTS_PUNE_SA1110 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110 -+# endif -+# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110) -+#else -+# define machine_is_acts_pune_sa1110() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXP425 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXP425 -+# endif -+# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425) -+#else -+# define machine_is_ixp425() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARGONPLUSODYSSEY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARGONPLUSODYSSEY -+# endif -+# define machine_is_i30030ads() (machine_arch_type == MACH_TYPE_ARGONPLUSODYSSEY) -+#else -+# define machine_is_i30030ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PERCH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PERCH -+# endif -+# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH) -+#else -+# define machine_is_perch() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EIS05R1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EIS05R1 -+# endif -+# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1) -+#else -+# define machine_is_eis05r1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PEPPERPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PEPPERPAD -+# endif -+# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD) -+#else -+# define machine_is_pepperpad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SB3010 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SB3010 -+# endif -+# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010) -+#else -+# define machine_is_sb3010() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RM9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RM9200 -+# endif -+# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200) -+#else -+# define machine_is_rm9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DMA03 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DMA03 -+# endif -+# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03) -+#else -+# define machine_is_dma03() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ROAD_S101 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ROAD_S101 -+# endif -+# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101) -+#else -+# define machine_is_road_s101() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A -+# endif -+# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A) -+#else -+# define machine_is_iq_nextgen_a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_B -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B -+# endif -+# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B) -+#else -+# define machine_is_iq_nextgen_b() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C -+# endif -+# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C) -+#else -+# define machine_is_iq_nextgen_c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D -+# endif -+# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D) -+#else -+# define machine_is_iq_nextgen_d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_E -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E -+# endif -+# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E) -+#else -+# define machine_is_iq_nextgen_e() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MALLOW_AT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MALLOW_AT91 -+# endif -+# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91) -+#else -+# define machine_is_mallow_at91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CYBERTRACKER_I -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CYBERTRACKER_I -+# endif -+# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I) -+#else -+# define machine_is_cybertracker_i() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GESBC931X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GESBC931X -+# endif -+# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X) -+#else -+# define machine_is_gesbc931x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CENTIPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CENTIPAD -+# endif -+# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD) -+#else -+# define machine_is_centipad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARMSOC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARMSOC -+# endif -+# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC) -+#else -+# define machine_is_armsoc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SE4200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SE4200 -+# endif -+# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200) -+#else -+# define machine_is_se4200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMS197A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMS197A -+# endif -+# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A) -+#else -+# define machine_is_ems197a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MICRO9 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MICRO9 -+# endif -+# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9) -+#else -+# define machine_is_micro9() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MICRO9L -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MICRO9L -+# endif -+# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L) -+#else -+# define machine_is_micro9l() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UC5471DSP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UC5471DSP -+# endif -+# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP) -+#else -+# define machine_is_uc5471dsp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SJ5471ENG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SJ5471ENG -+# endif -+# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG) -+#else -+# define machine_is_sj5471eng() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CMPXA26X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CMPXA26X -+# endif -+# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X) -+#else -+# define machine_is_none() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NC -+# endif -+# define machine_is_nc1() (machine_arch_type == MACH_TYPE_NC) -+#else -+# define machine_is_nc1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTE -+# endif -+# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE) -+#else -+# define machine_is_omap_palmte() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AJAX52X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AJAX52X -+# endif -+# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X) -+#else -+# define machine_is_ajax52x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIRIUSTAR -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIRIUSTAR -+# endif -+# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR) -+#else -+# define machine_is_siriustar() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IODATA_HDLG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IODATA_HDLG -+# endif -+# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG) -+#else -+# define machine_is_iodata_hdlg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91RM9200UTL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91RM9200UTL -+# endif -+# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL) -+#else -+# define machine_is_at91rm9200utl() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BIOSAFE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BIOSAFE -+# endif -+# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE) -+#else -+# define machine_is_biosafe() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MP1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MP1000 -+# endif -+# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000) -+#else -+# define machine_is_mp1000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PARSY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PARSY -+# endif -+# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY) -+#else -+# define machine_is_parsy() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CCXP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CCXP -+# endif -+# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP) -+#else -+# define machine_is_ccxp270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_GSAMPLE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE -+# endif -+# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE) -+#else -+# define machine_is_omap_gsample() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REALVIEW_EB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REALVIEW_EB -+# endif -+# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB) -+#else -+# define machine_is_realview_eb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAMOA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAMOA -+# endif -+# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA) -+#else -+# define machine_is_samoa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_T3XSCALE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_T3XSCALE -+# endif -+# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE) -+#else -+# define machine_is_t3xscale() (0) -+#endif -+ -+#ifdef CONFIG_MACH_I878 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_I878 -+# endif -+# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878) -+#else -+# define machine_is_i878() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BORZOI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BORZOI -+# endif -+# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI) -+#else -+# define machine_is_borzoi() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GECKO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GECKO -+# endif -+# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO) -+#else -+# define machine_is_gecko() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS101 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS101 -+# endif -+# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101) -+#else -+# define machine_is_ds101() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTT2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTT2 -+# endif -+# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2) -+#else -+# define machine_is_omap_palmtt2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMLD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMLD -+# endif -+# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD) -+#else -+# define machine_is_xscale_palmld() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CC9C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CC9C -+# endif -+# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C) -+#else -+# define machine_is_cc9c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SBC1670 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SBC1670 -+# endif -+# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670) -+#else -+# define machine_is_sbc1670() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXDP28X5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXDP28X5 -+# endif -+# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5) -+#else -+# define machine_is_ixdp28x5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTT -+# endif -+# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT) -+#else -+# define machine_is_omap_palmtt() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ML696K -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ML696K -+# endif -+# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K) -+#else -+# define machine_is_ml696k() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARCOM_ZEUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARCOM_ZEUS -+# endif -+# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS) -+#else -+# define machine_is_arcom_zeus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OSIRIS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OSIRIS -+# endif -+# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS) -+#else -+# define machine_is_osiris() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAESTRO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAESTRO -+# endif -+# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO) -+#else -+# define machine_is_maestro() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TUNGE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TUNGE2 -+# endif -+# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2) -+#else -+# define machine_is_tunge2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXBBM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXBBM -+# endif -+# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM) -+#else -+# define machine_is_ixbbm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX27 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX27 -+# endif -+# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27) -+#else -+# define machine_is_mx27ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AX8004 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AX8004 -+# endif -+# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004) -+#else -+# define machine_is_ax8004() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91SAM9261EK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91SAM9261EK -+# endif -+# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK) -+#else -+# define machine_is_at91sam9261ek() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LOFT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LOFT -+# endif -+# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT) -+#else -+# define machine_is_loft() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAGPIE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAGPIE -+# endif -+# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE) -+#else -+# define machine_is_magpie() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX21 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX21 -+# endif -+# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21) -+#else -+# define machine_is_mx21ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MB87M3400 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MB87M3400 -+# endif -+# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400) -+#else -+# define machine_is_mb87m3400() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MGUARD_DELTA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MGUARD_DELTA -+# endif -+# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA) -+#else -+# define machine_is_mguard_delta() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DAVINCI_DVDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DAVINCI_DVDP -+# endif -+# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP) -+#else -+# define machine_is_davinci_dvdp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCUNIVERSAL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCUNIVERSAL -+# endif -+# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL) -+#else -+# define machine_is_htcuniversal() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TPAD -+# endif -+# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD) -+#else -+# define machine_is_tpad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ROVERP3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ROVERP3 -+# endif -+# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3) -+#else -+# define machine_is_roverp3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JORNADA928 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JORNADA928 -+# endif -+# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928) -+#else -+# define machine_is_jornada928() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MV88FXX81 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MV88FXX81 -+# endif -+# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81) -+#else -+# define machine_is_mv88fxx81() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STMP36XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STMP36XX -+# endif -+# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX) -+#else -+# define machine_is_stmp36xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SXNI79524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SXNI79524 -+# endif -+# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524) -+#else -+# define machine_is_sxni79524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AMS_DELTA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AMS_DELTA -+# endif -+# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA) -+#else -+# define machine_is_ams_delta() (0) -+#endif -+ -+#ifdef CONFIG_MACH_URANIUM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_URANIUM -+# endif -+# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM) -+#else -+# define machine_is_uranium() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UCON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UCON -+# endif -+# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON) -+#else -+# define machine_is_ucon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NAS100D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NAS100D -+# endif -+# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D) -+#else -+# define machine_is_nas100d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_L083_1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_L083_1000 -+# endif -+# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000) -+#else -+# define machine_is_l083() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZX -+# endif -+# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX) -+#else -+# define machine_is_ezx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX5220 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX5220 -+# endif -+# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220) -+#else -+# define machine_is_pnx5220() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BUTTE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BUTTE -+# endif -+# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE) -+#else -+# define machine_is_butte() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SRM2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SRM2 -+# endif -+# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2) -+#else -+# define machine_is_srm2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DSBR -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DSBR -+# endif -+# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR) -+#else -+# define machine_is_dsbr() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CRYSTALBALL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CRYSTALBALL -+# endif -+# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL) -+#else -+# define machine_is_crystalball() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TINYPXA27X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TINYPXA27X -+# endif -+# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X) -+#else -+# define machine_is_tinypxa27x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HERBIE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HERBIE -+# endif -+# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE) -+#else -+# define machine_is_herbie() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAGICIAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAGICIAN -+# endif -+# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN) -+#else -+# define machine_is_magician() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM4002 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM4002 -+# endif -+# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002) -+#else -+# define machine_is_cm4002() (0) -+#endif -+ -+#ifdef CONFIG_MACH_B4 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_B4 -+# endif -+# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4) -+#else -+# define machine_is_b4() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAUI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAUI -+# endif -+# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI) -+#else -+# define machine_is_maui() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CYBERTRACKER_G -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CYBERTRACKER_G -+# endif -+# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G) -+#else -+# define machine_is_cybertracker_g() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXDKN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXDKN -+# endif -+# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN) -+#else -+# define machine_is_nxdkn() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MIO8390 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MIO8390 -+# endif -+# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390) -+#else -+# define machine_is_mio8390() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMI_BOARD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMI_BOARD -+# endif -+# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD) -+#else -+# define machine_is_omi_board() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX21CIV -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX21CIV -+# endif -+# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV) -+#else -+# define machine_is_mx21civ() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAHI_CDAC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAHI_CDAC -+# endif -+# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC) -+#else -+# define machine_is_mahi_cdac() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTX -+# endif -+# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX) -+#else -+# define machine_is_xscale_palmtx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C2413 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C2413 -+# endif -+# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413) -+#else -+# define machine_is_s3c2413() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAMSYS_EP0 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAMSYS_EP0 -+# endif -+# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0) -+#else -+# define machine_is_samsys_ep0() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WG302V1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WG302V1 -+# endif -+# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1) -+#else -+# define machine_is_wg302v1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WG302V2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WG302V2 -+# endif -+# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2) -+#else -+# define machine_is_wg302v2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EB42X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EB42X -+# endif -+# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X) -+#else -+# define machine_is_eb42x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ331ES -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ331ES -+# endif -+# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES) -+#else -+# define machine_is_iq331es() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COSYDSP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COSYDSP -+# endif -+# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP) -+#else -+# define machine_is_cosydsp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UPLAT7D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UPLAT7D -+# endif -+# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D) -+#else -+# define machine_is_uplat7d_proto() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PTDAVINCI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PTDAVINCI -+# endif -+# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI) -+#else -+# define machine_is_ptdavinci() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MBUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MBUS -+# endif -+# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS) -+#else -+# define machine_is_mbus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NADIA2VB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NADIA2VB -+# endif -+# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB) -+#else -+# define machine_is_nadia2vb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_R1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_R1000 -+# endif -+# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000) -+#else -+# define machine_is_r1000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HW90250 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HW90250 -+# endif -+# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250) -+#else -+# define machine_is_hw90250() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_2430SDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_2430SDP -+# endif -+# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP) -+#else -+# define machine_is_omap_2430sdp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DAVINCI_EVM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DAVINCI_EVM -+# endif -+# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM) -+#else -+# define machine_is_davinci_evm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_TORNADO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_TORNADO -+# endif -+# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO) -+#else -+# define machine_is_omap_tornado() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OLOCREEK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OLOCREEK -+# endif -+# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK) -+#else -+# define machine_is_olocreek() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PALMZ72 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PALMZ72 -+# endif -+# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72) -+#else -+# define machine_is_palmz72() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXDB500 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXDB500 -+# endif -+# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500) -+#else -+# define machine_is_nxdb500() (0) -+#endif -+ -+#ifdef CONFIG_MACH_APF9328 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_APF9328 -+# endif -+# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328) -+#else -+# define machine_is_apf9328() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_WIPOQ -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_WIPOQ -+# endif -+# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ) -+#else -+# define machine_is_omap_wipoq() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_TWIP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_TWIP -+# endif -+# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP) -+#else -+# define machine_is_omap_twip() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTREO650 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650 -+# endif -+# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650) -+#else -+# define machine_is_xscale_treo650() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACUMEN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACUMEN -+# endif -+# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN) -+#else -+# define machine_is_acumen() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XP100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XP100 -+# endif -+# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100) -+#else -+# define machine_is_xp100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FS2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FS2410 -+# endif -+# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410) -+#else -+# define machine_is_fs2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA270_CERF -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA270_CERF -+# endif -+# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF) -+#else -+# define machine_is_pxa270_cerf() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SQ2FTLPALM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SQ2FTLPALM -+# endif -+# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM) -+#else -+# define machine_is_sq2ftlpalm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BSEMSERVER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BSEMSERVER -+# endif -+# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER) -+#else -+# define machine_is_bsemserver() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NETCLIENT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NETCLIENT -+# endif -+# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT) -+#else -+# define machine_is_netclient() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTT5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5 -+# endif -+# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5) -+#else -+# define machine_is_xscale_palmtt5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTC -+# endif -+# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC) -+#else -+# define machine_is_xscale_palmtc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_APOLLON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_APOLLON -+# endif -+# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) -+#else -+# define machine_is_omap_apollon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARGONLVEVB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARGONLVEVB -+# endif -+# define machine_is_mxc30030evb() (machine_arch_type == MACH_TYPE_ARGONLVEVB) -+#else -+# define machine_is_mxc30030evb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REA_2D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REA_2D -+# endif -+# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D) -+#else -+# define machine_is_rea_2d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TI3E524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TI3E524 -+# endif -+# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524) -+#else -+# define machine_is_eti3e524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ATEB9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ATEB9200 -+# endif -+# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200) -+#else -+# define machine_is_ateb9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AUCKLAND -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AUCKLAND -+# endif -+# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND) -+#else -+# define machine_is_auckland() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AK3320M -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AK3320M -+# endif -+# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M) -+#else -+# define machine_is_ak3220m() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DURAMAX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DURAMAX -+# endif -+# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX) -+#else -+# define machine_is_duramax() (0) -+#endif -+ -+#ifdef CONFIG_MACH_N35 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_N35 -+# endif -+# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35) -+#else -+# define machine_is_n35() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PRONGHORN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PRONGHORN -+# endif -+# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN) -+#else -+# define machine_is_pronghorn() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FUNDY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FUNDY -+# endif -+# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY) -+#else -+# define machine_is_fundy() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LOGICPD_PXA270 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LOGICPD_PXA270 -+# endif -+# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270) -+#else -+# define machine_is_logicpd_pxa270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CPU777 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CPU777 -+# endif -+# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777) -+#else -+# define machine_is_cpu777() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIMICON9201 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIMICON9201 -+# endif -+# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201) -+#else -+# define machine_is_simicon9201() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LEAP2_HPM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LEAP2_HPM -+# endif -+# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM) -+#else -+# define machine_is_leap2_hpm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM922TXA10 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM922TXA10 -+# endif -+# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10) -+#else -+# define machine_is_cm922txa10() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA -+# endif -+# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA) -+#else -+# define machine_is_sandgate() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2 -+# endif -+# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2) -+#else -+# define machine_is_sandgate2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2G -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2G -+# endif -+# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G) -+#else -+# define machine_is_sandgate2g() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2P -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2P -+# endif -+# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P) -+#else -+# define machine_is_sandgate2p() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FRED_JACK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FRED_JACK -+# endif -+# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK) -+#else -+# define machine_is_fred_jack() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TTG_COLOR1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TTG_COLOR1 -+# endif -+# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1) -+#else -+# define machine_is_ttg_color1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXEB500HMI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXEB500HMI -+# endif -+# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI) -+#else -+# define machine_is_nxeb500hmi() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NETDCU8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NETDCU8 -+# endif -+# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8) -+#else -+# define machine_is_netdcu8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ML675050_CPU_BOA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA -+# endif -+# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA) -+#else -+# define machine_is_ml675050_cpu_boa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NG_FVX538 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NG_FVX538 -+# endif -+# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538) -+#else -+# define machine_is_ng_fvx538() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NG_FVS338 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NG_FVS338 -+# endif -+# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338) -+#else -+# define machine_is_ng_fvs338() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX4103 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX4103 -+# endif -+# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103) -+#else -+# define machine_is_pnx4103() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HESDB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HESDB -+# endif -+# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB) -+#else -+# define machine_is_hesdb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSILO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSILO -+# endif -+# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO) -+#else -+# define machine_is_xsilo() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESPRESSO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESPRESSO -+# endif -+# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO) -+#else -+# define machine_is_espresso() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMLC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMLC -+# endif -+# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC) -+#else -+# define machine_is_emlc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SISTERON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SISTERON -+# endif -+# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON) -+#else -+# define machine_is_sisteron() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RX1950 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RX1950 -+# endif -+# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950) -+#else -+# define machine_is_rx1950() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TSC_VENUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TSC_VENUS -+# endif -+# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS) -+#else -+# define machine_is_tsc_venus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS101J -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS101J -+# endif -+# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J) -+#else -+# define machine_is_ds101j() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MXC30030ADS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MXC30030ADS -+# endif -+# define machine_is_mxc30030ads() (machine_arch_type == MACH_TYPE_MXC30030ADS) -+#else -+# define machine_is_mxc30030ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC -+# endif -+# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC) -+#else -+# define machine_is_fujitsu_wimaxsoc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DUALPCMODEM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DUALPCMODEM -+# endif -+# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM) -+#else -+# define machine_is_dualpcmodem() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GESBC9312 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GESBC9312 -+# endif -+# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312) -+#else -+# define machine_is_gesbc9312() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCAPACHE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCAPACHE -+# endif -+# define machine_is_htcapache() (machine_arch_type == MACH_TYPE_HTCAPACHE) -+#else -+# define machine_is_htcapache() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXDP435 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXDP435 -+# endif -+# define machine_is_ixdp435() (machine_arch_type == MACH_TYPE_IXDP435) -+#else -+# define machine_is_ixdp435() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CATPROVT100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CATPROVT100 -+# endif -+# define machine_is_catprovt100() (machine_arch_type == MACH_TYPE_CATPROVT100) -+#else -+# define machine_is_catprovt100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOTUX1XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOTUX1XX -+# endif -+# define machine_is_picotux1xx() (machine_arch_type == MACH_TYPE_PICOTUX1XX) -+#else -+# define machine_is_picotux1xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOTUX2XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOTUX2XX -+# endif -+# define machine_is_picotux2xx() (machine_arch_type == MACH_TYPE_PICOTUX2XX) -+#else -+# define machine_is_picotux2xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DSMG600 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DSMG600 -+# endif -+# define machine_is_dsmg600() (machine_arch_type == MACH_TYPE_DSMG600) -+#else -+# define machine_is_dsmg600() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMPC2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMPC2 -+# endif -+# define machine_is_empc2() (machine_arch_type == MACH_TYPE_EMPC2) -+#else -+# define machine_is_empc2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VENTURA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VENTURA -+# endif -+# define machine_is_ventura() (machine_arch_type == MACH_TYPE_VENTURA) -+#else -+# define machine_is_ventura() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PHIDGET_SBC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PHIDGET_SBC -+# endif -+# define machine_is_phidget_sbc() (machine_arch_type == MACH_TYPE_PHIDGET_SBC) -+#else -+# define machine_is_phidget_sbc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IJ3K -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IJ3K -+# endif -+# define machine_is_ij3k() (machine_arch_type == MACH_TYPE_IJ3K) -+#else -+# define machine_is_ij3k() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PISGAH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PISGAH -+# endif -+# define machine_is_pisgah() (machine_arch_type == MACH_TYPE_PISGAH) -+#else -+# define machine_is_pisgah() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_FSAMPLE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_FSAMPLE -+# endif -+# define machine_is_omap_fsample() (machine_arch_type == MACH_TYPE_OMAP_FSAMPLE) -+#else -+# define machine_is_omap_fsample() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG720 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG720 -+# endif -+# define machine_is_sg720() (machine_arch_type == MACH_TYPE_SG720) -+#else -+# define machine_is_sg720() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REDFOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REDFOX -+# endif -+# define machine_is_redfox() (machine_arch_type == MACH_TYPE_REDFOX) -+#else -+# define machine_is_redfox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MYSH_EP9315_1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MYSH_EP9315_1 -+# endif -+# define machine_is_mysh_ep9315_1() (machine_arch_type == MACH_TYPE_MYSH_EP9315_1) -+#else -+# define machine_is_mysh_ep9315_1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TPF106 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TPF106 -+# endif -+# define machine_is_tpf106() (machine_arch_type == MACH_TYPE_TPF106) -+#else -+# define machine_is_tpf106() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91RM9200KG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91RM9200KG -+# endif -+# define machine_is_at91rm9200kg() (machine_arch_type == MACH_TYPE_AT91RM9200KG) -+#else -+# define machine_is_at91rm9200kg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SLEDB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SLEDB -+# endif -+# define machine_is_racemt2() (machine_arch_type == MACH_TYPE_SLEDB) -+#else -+# define machine_is_racemt2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ONTRACK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ONTRACK -+# endif -+# define machine_is_ontrack() (machine_arch_type == MACH_TYPE_ONTRACK) -+#else -+# define machine_is_ontrack() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PM1200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PM1200 -+# endif -+# define machine_is_pm1200() (machine_arch_type == MACH_TYPE_PM1200) -+#else -+# define machine_is_pm1200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESS24XXX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESS24XXX -+# endif -+# define machine_is_ess24562() (machine_arch_type == MACH_TYPE_ESS24XXX) -+#else -+# define machine_is_ess24562() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COREMP7 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COREMP7 -+# endif -+# define machine_is_coremp7() (machine_arch_type == MACH_TYPE_COREMP7) -+#else -+# define machine_is_coremp7() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEXCODER_6446 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEXCODER_6446 -+# endif -+# define machine_is_nexcoder_6446() (machine_arch_type == MACH_TYPE_NEXCODER_6446) -+#else -+# define machine_is_nexcoder_6446() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STVC8380 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STVC8380 -+# endif -+# define machine_is_stvc8380() (machine_arch_type == MACH_TYPE_STVC8380) -+#else -+# define machine_is_stvc8380() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TEKLYNX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TEKLYNX -+# endif -+# define machine_is_teklynx() (machine_arch_type == MACH_TYPE_TEKLYNX) -+#else -+# define machine_is_teklynx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CARBONADO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CARBONADO -+# endif -+# define machine_is_carbonado() (machine_arch_type == MACH_TYPE_CARBONADO) -+#else -+# define machine_is_carbonado() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SYSMOS_MP730 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SYSMOS_MP730 -+# endif -+# define machine_is_sysmos_mp730() (machine_arch_type == MACH_TYPE_SYSMOS_MP730) -+#else -+# define machine_is_sysmos_mp730() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SNAPPER_CL15 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SNAPPER_CL15 -+# endif -+# define machine_is_snapper_cl15() (machine_arch_type == MACH_TYPE_SNAPPER_CL15) -+#else -+# define machine_is_snapper_cl15() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PGIGIM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PGIGIM -+# endif -+# define machine_is_pgigim() (machine_arch_type == MACH_TYPE_PGIGIM) -+#else -+# define machine_is_pgigim() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PTX9160P2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PTX9160P2 -+# endif -+# define machine_is_ptx9160p2() (machine_arch_type == MACH_TYPE_PTX9160P2) -+#else -+# define machine_is_ptx9160p2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DCORE1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DCORE1 -+# endif -+# define machine_is_dcore1() (machine_arch_type == MACH_TYPE_DCORE1) -+#else -+# define machine_is_dcore1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VICTORPXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VICTORPXA -+# endif -+# define machine_is_victorpxa() (machine_arch_type == MACH_TYPE_VICTORPXA) -+#else -+# define machine_is_victorpxa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX2DTB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX2DTB -+# endif -+# define machine_is_mx2dtb() (machine_arch_type == MACH_TYPE_MX2DTB) -+#else -+# define machine_is_mx2dtb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA_IREX_ER0100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA_IREX_ER0100 -+# endif -+# define machine_is_pxa_irex_er0100() (machine_arch_type == MACH_TYPE_PXA_IREX_ER0100) -+#else -+# define machine_is_pxa_irex_er0100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMZ71 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMZ71 -+# endif -+# define machine_is_omap_palmz71() (machine_arch_type == MACH_TYPE_OMAP_PALMZ71) -+#else -+# define machine_is_omap_palmz71() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BARTEC_DEG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BARTEC_DEG -+# endif -+# define machine_is_bartec_deg() (machine_arch_type == MACH_TYPE_BARTEC_DEG) -+#else -+# define machine_is_bartec_deg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HW50251 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HW50251 -+# endif -+# define machine_is_hw50251() (machine_arch_type == MACH_TYPE_HW50251) -+#else -+# define machine_is_hw50251() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IBOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IBOX -+# endif -+# define machine_is_ibox() (machine_arch_type == MACH_TYPE_IBOX) -+#else -+# define machine_is_ibox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ATLASLH7A404 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ATLASLH7A404 -+# endif -+# define machine_is_atlaslh7a404() (machine_arch_type == MACH_TYPE_ATLASLH7A404) -+#else -+# define machine_is_atlaslh7a404() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PT2026 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PT2026 -+# endif -+# define machine_is_pt2026() (machine_arch_type == MACH_TYPE_PT2026) -+#else -+# define machine_is_pt2026() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCALPINE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCALPINE -+# endif -+# define machine_is_htcalpine() (machine_arch_type == MACH_TYPE_HTCALPINE) -+#else -+# define machine_is_htcalpine() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BARTEC_VTU -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BARTEC_VTU -+# endif -+# define machine_is_bartec_vtu() (machine_arch_type == MACH_TYPE_BARTEC_VTU) -+#else -+# define machine_is_bartec_vtu() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VCOREII -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VCOREII -+# endif -+# define machine_is_vcoreii() (machine_arch_type == MACH_TYPE_VCOREII) -+#else -+# define machine_is_vcoreii() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PDNB3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PDNB3 -+# endif -+# define machine_is_pdnb3() (machine_arch_type == MACH_TYPE_PDNB3) -+#else -+# define machine_is_pdnb3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCBEETLES -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCBEETLES -+# endif -+# define machine_is_htcbeetles() (machine_arch_type == MACH_TYPE_HTCBEETLES) -+#else -+# define machine_is_htcbeetles() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C6400 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C6400 -+# endif -+# define machine_is_s3c6400() (machine_arch_type == MACH_TYPE_S3C6400) -+#else -+# define machine_is_s3c6400() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C2443 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C2443 -+# endif -+# define machine_is_s3c2443() (machine_arch_type == MACH_TYPE_S3C2443) -+#else -+# define machine_is_s3c2443() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_LDK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_LDK -+# endif -+# define machine_is_omap_ldk() (machine_arch_type == MACH_TYPE_OMAP_LDK) -+#else -+# define machine_is_omap_ldk() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2460 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2460 -+# endif -+# define machine_is_smdk2460() (machine_arch_type == MACH_TYPE_SMDK2460) -+#else -+# define machine_is_smdk2460() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2440 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2440 -+# endif -+# define machine_is_smdk2440() (machine_arch_type == MACH_TYPE_SMDK2440) -+#else -+# define machine_is_smdk2440() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2412 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2412 -+# endif -+# define machine_is_smdk2412() (machine_arch_type == MACH_TYPE_SMDK2412) -+#else -+# define machine_is_smdk2412() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WEBBOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WEBBOX -+# endif -+# define machine_is_webbox() (machine_arch_type == MACH_TYPE_WEBBOX) -+#else -+# define machine_is_webbox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CWWNDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CWWNDP -+# endif -+# define machine_is_cwwndp() (machine_arch_type == MACH_TYPE_CWWNDP) -+#else -+# define machine_is_cwwndp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DRAGON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DRAGON -+# endif -+# define machine_is_dragon() (machine_arch_type == MACH_TYPE_DRAGON) -+#else -+# define machine_is_dragon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OPENDO_CPU_BOARD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OPENDO_CPU_BOARD -+# endif -+# define machine_is_opendo_cpu_board() (machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD) -+#else -+# define machine_is_opendo_cpu_board() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CCM2200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CCM2200 -+# endif -+# define machine_is_ccm2200() (machine_arch_type == MACH_TYPE_CCM2200) -+#else -+# define machine_is_ccm2200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ETWARM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ETWARM -+# endif -+# define machine_is_etwarm() (machine_arch_type == MACH_TYPE_ETWARM) -+#else -+# define machine_is_etwarm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_M93030 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_M93030 -+# endif -+# define machine_is_m93030() (machine_arch_type == MACH_TYPE_M93030) -+#else -+# define machine_is_m93030() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CC7U -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CC7U -+# endif -+# define machine_is_cc7u() (machine_arch_type == MACH_TYPE_CC7U) -+#else -+# define machine_is_cc7u() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MTT_RANGER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MTT_RANGER -+# endif -+# define machine_is_mtt_ranger() (machine_arch_type == MACH_TYPE_MTT_RANGER) -+#else -+# define machine_is_mtt_ranger() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEXUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEXUS -+# endif -+# define machine_is_nexus() (machine_arch_type == MACH_TYPE_NEXUS) -+#else -+# define machine_is_nexus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DESMAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DESMAN -+# endif -+# define machine_is_desman() (machine_arch_type == MACH_TYPE_DESMAN) -+#else -+# define machine_is_desman() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BKDE303 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BKDE303 -+# endif -+# define machine_is_bkde303() (machine_arch_type == MACH_TYPE_BKDE303) -+#else -+# define machine_is_bkde303() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2413 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2413 -+# endif -+# define machine_is_smdk2413() (machine_arch_type == MACH_TYPE_SMDK2413) -+#else -+# define machine_is_smdk2413() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AML_M7200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AML_M7200 -+# endif -+# define machine_is_aml_m7200() (machine_arch_type == MACH_TYPE_AML_M7200) -+#else -+# define machine_is_aml_m7200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AML_M5900 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AML_M5900 -+# endif -+# define machine_is_aml_m5900() (machine_arch_type == MACH_TYPE_AML_M5900) -+#else -+# define machine_is_aml_m5900() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG640 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG640 -+# endif -+# define machine_is_sg640() (machine_arch_type == MACH_TYPE_SG640) -+#else -+# define machine_is_sg640() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDG79524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDG79524 -+# endif -+# define machine_is_edg79524() (machine_arch_type == MACH_TYPE_EDG79524) -+#else -+# define machine_is_edg79524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AI2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AI2410 -+# endif -+# define machine_is_ai2410() (machine_arch_type == MACH_TYPE_AI2410) -+#else -+# define machine_is_ai2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXP465 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXP465 -+# endif -+# define machine_is_ixp465() (machine_arch_type == MACH_TYPE_IXP465) -+#else -+# define machine_is_ixp465() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BALLOON3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BALLOON3 -+# endif -+# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3) -+#else -+# define machine_is_balloon3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_QT2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_QT2410 -+# endif -+# define machine_is_qt2410() (machine_arch_type == MACH_TYPE_QT2410) -+#else -+# define machine_is_qt2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEO1973_GTA01 -+# endif -+# define machine_is_neo1973_gta01() (machine_arch_type == MACH_TYPE_NEO1973_GTA01) -+#else -+# define machine_is_neo1973_gta01() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HXD8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HXD8 -+# endif -+# define machine_is_hxd8() (machine_arch_type == MACH_TYPE_HXD8) -+#else -+# define machine_is_neo8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEO1973_GTA02 -+# endif -+# define machine_is_neo1973_gta02() (machine_arch_type == MACH_TYPE_NEO1973_GTA02) -+#else -+# define machine_is_neo1973_gta02() (0) -+#endif -+ -+ - /* - * These have not yet been registered - */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-mokoversion.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-mokoversion.patch deleted file mode 100644 index a44434155e..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-mokoversion.patch +++ /dev/null @@ -1,10 +0,0 @@ -Index: u-boot/tools/setlocalversion -=================================================================== ---- u-boot.orig/tools/setlocalversion 2007-03-26 14:42:58.000000000 +0200 -+++ u-boot/tools/setlocalversion 2007-03-26 14:46:47.000000000 +0200 -@@ -20,3 +20,5 @@ - printf '%s' -dirty - fi - fi -+ -+printf '%s' -moko9 diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-nand-markbad-reallybad.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-nand-markbad-reallybad.patch deleted file mode 100644 index d630889e3c..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-nand-markbad-reallybad.patch +++ /dev/null @@ -1,20 +0,0 @@ -This patch makes sure that the 'nand markbad' command does not only mark a block -'bad' in the bad-block table, but _also_ marks it bad in the OOB area. - -we need this to preserve the bad block status when re-creating the bad block table -at some later point. - -Signed-off-by: Harald Welte <laforge@openmoko.org> -Index: u-boot/drivers/nand/nand_base.c -=================================================================== ---- u-boot.orig/drivers/nand/nand_base.c 2007-03-01 12:47:31.000000000 +0100 -+++ u-boot/drivers/nand/nand_base.c 2007-03-01 12:48:08.000000000 +0100 -@@ -481,7 +481,7 @@ - - /* Do we have a flash based bad block table ? */ - if (this->options & NAND_USE_FLASH_BBT) -- return nand_update_bbt (mtd, ofs); -+ nand_update_bbt (mtd, ofs); - - /* We write two bytes, so we dont have to mess with 16 bit access */ - ofs += mtd->oobsize + (this->badblockpos & ~0x01); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-defaultenv.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-defaultenv.patch deleted file mode 100644 index 7e3aa4f480..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-defaultenv.patch +++ /dev/null @@ -1,31 +0,0 @@ -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h 2007-02-27 00:43:16.000000000 +0100 -+++ u-boot/include/configs/neo1973_gta01.h 2007-02-27 00:47:49.000000000 +0100 -@@ -115,8 +115,8 @@ - #include <cmd_confdefs.h> - - #define CONFIG_BOOTDELAY 3 --#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" --#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x34000 0x200000; bootm 0x32000000" -+#define CONFIG_BOOTARGS "" -+#define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" - - #define CONFIG_DOS_PARTITION 1 - -@@ -181,11 +181,14 @@ - #define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ - #define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" - #define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION --#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" - #define CONFIG_USBD_DFU 1 - #define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ - #define CONFIG_USBD_DFU_INTERFACE 2 - -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "usbtty=cdc_acm\0" \ -+ "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8\0" \ -+ "" - - /*----------------------------------------------------------------------- - * Physical Memory Map diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-resume.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-resume.patch deleted file mode 100644 index 19d912620d..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-resume.patch +++ /dev/null @@ -1,113 +0,0 @@ -Resume support for low-level uboot code, Version 5 - -Signed-off-by: Ben Dooks <ben-linux@fluff.org> - -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S 2007-02-28 03:51:24.000000000 +0100 -+++ u-boot/cpu/arm920t/start.S 2007-03-01 02:43:47.000000000 +0100 -@@ -158,18 +158,68 @@ - str r1, [r0] - # endif - -+ /* default FCLK is 202 MHz ! */ -+#define LOCKTIME 0x4c000000 -+#define UPLLCON 0x4c000008 -+//#define MPLLCFG ((0x90 << 12) + (0x2 << 4) + 0x2) -+#define MPLLCFG ((0x90 << 12) + (0x7 << 4) + 0x0) -+#define UPLLCFG ((0x78 << 12) + (0x2 << 4) + 0x3) -+ ldr r0, =LOCKTIME -+ mov r1, #0xffffff -+ str r1, [r0] -+ -+ ldr r0, =UPLLCON -+ ldr r1, =UPLLCFG -+ str r1, [r0] -+ -+ /* Page 7-19, seven nops between UPLL and MPLL */ -+ nop -+ nop -+ nop -+ nop -+ nop -+ nop -+ nop -+ -+ ldr r1, =MPLLCFG -+ str r1, [r0, #-4] /* MPLLCON */ -+ - /* FCLK:HCLK:PCLK = 1:2:4 */ -- /* default FCLK is 120 MHz ! */ - ldr r0, =CLKDIVN - mov r1, #3 - str r1, [r0] -+ -+#if 1 -+ /* enable uart */ -+ ldr r0, =0x4c00000c /* clkcon */ -+ ldr r1, =0x7fff0 /* all clocks on */ -+ str r1, [r0] -+ -+ /* gpio UART0 init */ -+ ldr r0, =0x56000070 -+ mov r1, #0xaa -+ str r1, [r0] -+ -+ /* init uart */ -+ ldr r0, =0x50000000 -+ mov r1, #0x03 -+ str r1, [r0] -+ ldr r1, =0x245 -+ str r1, [r0, #0x04] -+ mov r1, #0x01 -+ str r1, [r0, #0x08] -+ mov r1, #0x00 -+ str r1, [r0, #0x0c] -+ mov r1, #0x1a -+ str r1, [r0, #0x28] -+#endif -+ - #endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ - - #ifndef CONFIG_SKIP_LOWLEVEL_INIT - #ifndef CONFIG_LL_INIT_NAND_ONLY - bl cpu_init_crit - #endif --#endif - - #ifndef CONFIG_SKIP_RELOCATE_UBOOT - adr r0, _start /* r0 <- current position of code */ -@@ -202,9 +252,33 @@ - - #ifdef CONFIG_S3C2410_NAND_BOOT - nand_load: -+ /* take sdram out of power down */ -+ ldr r0, =0x56000080 /* misccr */ -+ ldr r1, [ r0 ] -+ bic r1, r1, #(S3C2410_MISCCR_nEN_SCLK0 | S3C2410_MISCCR_nEN_SCLK1 | S3C2410_MISCCR_nEN_SCLKE) -+ str r1, [ r0 ] -+ -+ /* ensure signals stabalise */ -+ mov r1, #128 -+1: subs r1, r1, #1 -+ bpl 1b -+ - #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY) - bl cpu_init_crit - #endif -+#if defined(CONFIG_S3C2410) -+ /* ensure some refresh has happened */ -+ ldr r1, =0xfffff -+1: subs r1, r1, #1 -+ bpl 1b -+ -+ /* test for resume */ -+ ldr r1, =0x560000B4 /* gstatus2 */ -+ ldr r0, [ r1 ] -+ tst r0, #0x02 /* is this resume from power down */ -+ ldrne pc, [r1, #4] /* gstatus3 */ -+#endif /* CONFIG_S3C2410 */ -+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - - /* mov r10, lr */ - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-misccr-definitions.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-misccr-definitions.patch deleted file mode 100644 index 6efe24651a..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-misccr-definitions.patch +++ /dev/null @@ -1,45 +0,0 @@ -Index: u-boot/include/s3c2410.h -=================================================================== ---- u-boot.orig/include/s3c2410.h -+++ u-boot/include/s3c2410.h -@@ -233,4 +233,40 @@ static inline S3C2410_SDI * S3C2410_GetB - rINTPND;\ - } - /* Wait until rINTPND is changed for the case that the ISR is very short. */ -+ -+#define S3C2410_MISCCR_USBDEV (0<<3) -+#define S3C2410_MISCCR_USBHOST (1<<3) -+ -+#define S3C2410_MISCCR_CLK0_MPLL (0<<4) -+#define S3C2410_MISCCR_CLK0_UPLL (1<<4) -+#define S3C2410_MISCCR_CLK0_FCLK (2<<4) -+#define S3C2410_MISCCR_CLK0_HCLK (3<<4) -+#define S3C2410_MISCCR_CLK0_PCLK (4<<4) -+#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) -+#define S3C2410_MISCCR_CLK0_MASK (7<<4) -+ -+#define S3C2410_MISCCR_CLK1_MPLL (0<<8) -+#define S3C2410_MISCCR_CLK1_UPLL (1<<8) -+#define S3C2410_MISCCR_CLK1_FCLK (2<<8) -+#define S3C2410_MISCCR_CLK1_HCLK (3<<8) -+#define S3C2410_MISCCR_CLK1_PCLK (4<<8) -+#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) -+#define S3C2410_MISCCR_CLK1_MASK (7<<8) -+ -+#define S3C2410_MISCCR_USBSUSPND0 (1<<12) -+#define S3C2410_MISCCR_USBSUSPND1 (1<<13) -+ -+#define S3C2410_MISCCR_nRSTCON (1<<16) -+ -+#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) -+#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) -+#define S3C2410_MISCCR_nEN_SCLKE (1<<19) -+#define S3C2410_MISCCR_SDSLEEP (7<<17) -+ -+#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) -+#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) -+#define S3C2410_CLKSLOW_SLOW (1<<4) -+#define S3C2410_CLKSLOW_SLOWVAL(x) (x) -+#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) -+ - #endif /*__S3C2410_H__*/ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-mmc.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-mmc.patch deleted file mode 100644 index b775beaa07..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-mmc.patch +++ /dev/null @@ -1,818 +0,0 @@ -This patch adds MMC/SD support to the S3C2410 SoC code in -u-boot - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/cpu/arm920t/s3c24x0/Makefile -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/Makefile -+++ u-boot/cpu/arm920t/s3c24x0/Makefile -@@ -26,7 +26,7 @@ - LIB = $(obj)lib$(SOC).a - - COBJS = i2c.o interrupts.o serial.o speed.o \ -- usb_ohci.o nand_read.o nand.o cmd_s3c2410.o -+ usb_ohci.o nand_read.o nand.o mmc.o cmd_s3c2410.o - - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) - OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -Index: u-boot/cpu/arm920t/s3c24x0/mmc.c -=================================================================== ---- /dev/null -+++ u-boot/cpu/arm920t/s3c24x0/mmc.c -@@ -0,0 +1,531 @@ -+/* -+ * u-boot S3C2410 MMC/SD card driver -+ * (C) Copyright 2006 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * based on u-boot pxa MMC driver and linux/drivers/mmc/s3c2410mci.c -+ * (C) 2005-2005 Thomas Kleffel -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <config.h> -+#include <common.h> -+#include <mmc.h> -+#include <asm/errno.h> -+#include <asm/io.h> -+#include <s3c2410.h> -+#include <part.h> -+#include <fat.h> -+ -+#ifdef CONFIG_MMC -+ -+#define CONFIG_MMC_WIDE -+ -+static S3C2410_SDI *sdi; -+ -+static block_dev_desc_t mmc_dev; -+ -+block_dev_desc_t * mmc_get_dev(int dev) -+{ -+ return ((block_dev_desc_t *)&mmc_dev); -+} -+ -+/* -+ * FIXME needs to read cid and csd info to determine block size -+ * and other parameters -+ */ -+static uchar mmc_buf[MMC_BLOCK_SIZE]; -+static mmc_csd_t mmc_csd; -+static int mmc_ready = 0; -+static int wide = 0; -+ -+ -+#define CMD_F_RESP 0x01 -+#define CMD_F_RESP_LONG 0x02 -+ -+static u_int32_t *mmc_cmd(ushort cmd, ulong arg, ushort flags) -+{ -+ static u_int32_t resp[5]; -+ -+ u_int32_t ccon, csta; -+ u_int32_t csta_rdy_bit = S3C2410_SDICMDSTAT_CMDSENT; -+ -+ memset(resp, 0, sizeof(resp)); -+ -+ debug("mmc_cmd CMD%d arg=0x%08x flags=%x\n", cmd, arg, flags); -+ -+ sdi->SDICSTA = 0xffffffff; -+ sdi->SDIDSTA = 0xffffffff; -+ sdi->SDIFSTA = 0xffffffff; -+ -+ sdi->SDICARG = arg; -+ -+ ccon = cmd & S3C2410_SDICMDCON_INDEX; -+ ccon |= S3C2410_SDICMDCON_SENDERHOST|S3C2410_SDICMDCON_CMDSTART; -+ -+ if (flags & CMD_F_RESP) { -+ ccon |= S3C2410_SDICMDCON_WAITRSP; -+ csta_rdy_bit = S3C2410_SDICMDSTAT_RSPFIN; /* 1 << 9 */ -+ } -+ -+ if (flags & CMD_F_RESP_LONG) -+ ccon |= S3C2410_SDICMDCON_LONGRSP; -+ -+ sdi->SDICCON = ccon; -+ -+ while (1) { -+ csta = sdi->SDICSTA; -+ if (csta & csta_rdy_bit) -+ break; -+ if (csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { -+ printf("===============> MMC CMD Timeout\n"); -+ sdi->SDICSTA |= S3C2410_SDICMDSTAT_CMDTIMEOUT; -+ break; -+ } -+ } -+ -+ debug("final MMC CMD status 0x%x\n", csta); -+ -+ sdi->SDICSTA |= csta_rdy_bit; -+ -+ if (flags & CMD_F_RESP) { -+ resp[0] = sdi->SDIRSP0; -+ resp[1] = sdi->SDIRSP1; -+ resp[2] = sdi->SDIRSP2; -+ resp[3] = sdi->SDIRSP3; -+ } -+ -+ return resp; -+} -+ -+#define FIFO_FILL(host) ((host->SDIFSTA & S3C2410_SDIFSTA_COUNTMASK) >> 2) -+ -+static int mmc_block_read(uchar *dst, ulong src, ulong len) -+{ -+ u_int32_t dcon, fifo; -+ u_int32_t *dst_u32 = (u_int32_t *)dst; -+ u_int32_t *resp; -+ -+ if (len == 0) -+ return 0; -+ -+ debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len); -+ -+ /* set block len */ -+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, len, CMD_F_RESP); -+ sdi->SDIBSIZE = len; -+ -+ //sdi->SDIPRE = 0xff; -+ -+ /* setup data */ -+ dcon = (len >> 9) & S3C2410_SDIDCON_BLKNUM; -+ dcon |= S3C2410_SDIDCON_BLOCKMODE; -+ dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART; -+ if (wide) -+ dcon |= S3C2410_SDIDCON_WIDEBUS; -+ sdi->SDIDCON = dcon; -+ -+ /* send read command */ -+ resp = mmc_cmd(MMC_CMD_READ_BLOCK, src, CMD_F_RESP); -+ -+ while (len > 0) { -+ u_int32_t sdidsta = sdi->SDIDSTA; -+ fifo = FIFO_FILL(sdi); -+ if (sdidsta & (S3C2410_SDIDSTA_FIFOFAIL| -+ S3C2410_SDIDSTA_CRCFAIL| -+ S3C2410_SDIDSTA_RXCRCFAIL| -+ S3C2410_SDIDSTA_DATATIMEOUT)) { -+ printf("mmc_block_read: err SDIDSTA=0x%08x\n", sdidsta); -+ return -EIO; -+ } -+ -+ while (fifo--) { -+ //debug("dst_u32 = 0x%08x\n", dst_u32); -+ *(dst_u32++) = sdi->SDIDAT; -+ if (len >= 4) -+ len -= 4; -+ else { -+ len = 0; -+ break; -+ } -+ } -+ } -+ -+ debug("waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); -+ while (!(sdi->SDIDSTA & (1 << 4))) {} -+ debug("done waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); -+ -+ sdi->SDIDCON = 0; -+ -+ if (!(sdi->SDIDSTA & S3C2410_SDIDSTA_XFERFINISH)) -+ debug("mmc_block_read; transfer not finished!\n"); -+ -+ return 0; -+} -+ -+static int mmc_block_write(ulong dst, uchar *src, int len) -+{ -+ printf("MMC block write not yet supported on S3C2410!\n"); -+ return -1; -+} -+ -+ -+int mmc_read(ulong src, uchar *dst, int size) -+{ -+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end; -+ ulong mmc_block_size, mmc_block_address; -+ -+ if (size == 0) -+ return 0; -+ -+ if (!mmc_ready) { -+ printf("Please initialize the MMC first\n"); -+ return -1; -+ } -+ -+ mmc_block_size = MMC_BLOCK_SIZE; -+ mmc_block_address = ~(mmc_block_size - 1); -+ -+ src -= CFG_MMC_BASE; -+ end = src + size; -+ part_start = ~mmc_block_address & src; -+ part_end = ~mmc_block_address & end; -+ aligned_start = mmc_block_address & src; -+ aligned_end = mmc_block_address & end; -+ -+ /* all block aligned accesses */ -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_start) { -+ part_len = mmc_block_size - part_start; -+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) -+ return -1; -+ -+ memcpy(dst, mmc_buf+part_start, part_len); -+ dst += part_len; -+ src += part_len; -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) { -+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) -+ return -1; -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_end && src < end) { -+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) -+ return -1; -+ -+ memcpy(dst, mmc_buf, part_end); -+ } -+ return 0; -+} -+ -+int mmc_write(uchar *src, ulong dst, int size) -+{ -+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end; -+ ulong mmc_block_size, mmc_block_address; -+ -+ if (size == 0) -+ return 0; -+ -+ if (!mmc_ready) { -+ printf("Please initialize the MMC first\n"); -+ return -1; -+ } -+ -+ mmc_block_size = MMC_BLOCK_SIZE; -+ mmc_block_address = ~(mmc_block_size - 1); -+ -+ dst -= CFG_MMC_BASE; -+ end = dst + size; -+ part_start = ~mmc_block_address & dst; -+ part_end = ~mmc_block_address & end; -+ aligned_start = mmc_block_address & dst; -+ aligned_end = mmc_block_address & end; -+ -+ /* all block aligned accesses */ -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_start) { -+ part_len = mmc_block_size - part_start; -+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) -+ return -1; -+ -+ memcpy(mmc_buf+part_start, src, part_len); -+ if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) -+ return -1; -+ -+ dst += part_len; -+ src += part_len; -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) { -+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) -+ return -1; -+ -+ } -+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if (part_end && dst < end) { -+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", -+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); -+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) -+ return -1; -+ -+ memcpy(mmc_buf, src, part_end); -+ if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) -+ return -1; -+ -+ } -+ return 0; -+} -+ -+ulong mmc_bread(int dev_num, ulong blknr, ulong blkcnt, void *dst) -+{ -+ int mmc_block_size = MMC_BLOCK_SIZE; -+ ulong src = blknr * mmc_block_size + CFG_MMC_BASE; -+ -+ mmc_read(src, dst, blkcnt*mmc_block_size); -+ return blkcnt; -+} -+ -+/* MMC_DEFAULT_RCA should probably be just 1, but this may break other code -+ that expects it to be shifted. */ -+static u_int16_t rca = MMC_DEFAULT_RCA >> 16; -+ -+static u_int32_t mmc_size(const struct mmc_csd *csd) -+{ -+ u_int32_t block_len, mult, blocknr; -+ -+ block_len = csd->read_bl_len << 12; -+ mult = csd->c_size_mult1 << 8; -+ blocknr = (csd->c_size+1) * mult; -+ -+ return blocknr * block_len; -+} -+ -+struct sd_cid { -+ char pnm_0; /* product name */ -+ char oid_1; /* OEM/application ID */ -+ char oid_0; -+ uint8_t mid; /* manufacturer ID */ -+ char pnm_4; -+ char pnm_3; -+ char pnm_2; -+ char pnm_1; -+ uint8_t psn_2; /* product serial number */ -+ uint8_t psn_1; -+ uint8_t psn_0; /* MSB */ -+ uint8_t prv; /* product revision */ -+ uint8_t crc; /* CRC7 checksum, b0 is unused and set to 1 */ -+ uint8_t mdt_1; /* manufacturing date, LSB, RRRRyyyy yyyymmmm */ -+ uint8_t mdt_0; /* MSB */ -+ uint8_t psn_3; /* LSB */ -+}; -+ -+static void print_mmc_cid(mmc_cid_t *cid) -+{ -+ printf("MMC found. Card desciption is:\n"); -+ printf("Manufacturer ID = %02x%02x%02x\n", -+ cid->id[0], cid->id[1], cid->id[2]); -+ printf("HW/FW Revision = %x %x\n",cid->hwrev, cid->fwrev); -+ cid->hwrev = cid->fwrev = 0; /* null terminate string */ -+ printf("Product Name = %s\n",cid->name); -+ printf("Serial Number = %02x%02x%02x\n", -+ cid->sn[0], cid->sn[1], cid->sn[2]); -+ printf("Month = %d\n",cid->month); -+ printf("Year = %d\n",1997 + cid->year); -+} -+ -+static void print_sd_cid(const struct sd_cid *cid) -+{ -+ printf("Manufacturer: 0x%02x, OEM \"%c%c\"\n", -+ cid->mid, cid->oid_0, cid->oid_1); -+ printf("Product name: \"%c%c%c%c%c\", revision %d.%d\n", -+ cid->pnm_0, cid->pnm_1, cid->pnm_2, cid->pnm_3, cid->pnm_4, -+ cid->prv >> 4, cid->prv & 15); -+ printf("Serial number: %u\n", -+ cid->psn_0 << 24 | cid->psn_1 << 16 | cid->psn_2 << 8 | -+ cid->psn_3); -+ printf("Manufacturing date: %d/%d\n", -+ cid->mdt_1 & 15, -+ 2000+((cid->mdt_0 & 15) << 4)+((cid->mdt_1 & 0xf0) >> 4)); -+ printf("CRC: 0x%02x, b0 = %d\n", -+ cid->crc >> 1, cid->crc & 1); -+} -+ -+int mmc_init(int verbose) -+{ -+ int retries, rc = -ENODEV; -+ int is_sd = 0; -+ u_int32_t *resp; -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ -+ sdi = S3C2410_GetBase_SDI(); -+ -+ debug("mmc_init(PCLK=%u)\n", get_PCLK()); -+ -+ clk_power->CLKCON |= (1 << 9); -+ -+ /* S3C2410 has some bug that prevents reliable operation at higher speed */ -+ //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ -+ sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ -+ sdi->SDIBSIZE = 512; -+ sdi->SDIDTIMER = 0xffff; -+ sdi->SDIIMSK = 0x0; -+ sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK; -+ udelay(125000); /* FIXME: 74 SDCLK cycles */ -+ -+ mmc_csd.c_size = 0; -+ -+ /* reset */ -+ retries = 10; -+ resp = mmc_cmd(MMC_CMD_RESET, 0, 0); -+ -+ printf("trying to detect SD Card...\n"); -+ while (retries--) { -+ udelay(100000); -+ resp = mmc_cmd(55, 0x00000000, CMD_F_RESP); -+ resp = mmc_cmd(41, 0x00300000, CMD_F_RESP); -+ -+ if (resp[0] & (1 << 31)) { -+ is_sd = 1; -+ break; -+ } -+ } -+ -+ if (retries == 0 && !is_sd) { -+ retries = 10; -+ printf("failed to detect SD Card, trying MMC\n"); -+ resp = mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ffc000, CMD_F_RESP); -+ while (retries-- && resp && !(resp[4] & 0x80)) { -+ debug("resp %x %x\n", resp[0], resp[1]); -+ udelay(50); -+ resp = mmc_cmd(1, 0x00ffff00, CMD_F_RESP); -+ } -+ } -+ -+ /* try to get card id */ -+ resp = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, CMD_F_RESP|CMD_F_RESP_LONG); -+ if (resp) { -+ if (!is_sd) { -+ /* TODO configure mmc driver depending on card -+ attributes */ -+ mmc_cid_t *cid = (mmc_cid_t *)resp; -+ -+ if (verbose) -+ print_mmc_cid(cid); -+ sprintf((char *) mmc_dev.vendor, -+ "Man %02x%02x%02x Snr %02x%02x%02x", -+ cid->id[0], cid->id[1], cid->id[2], -+ cid->sn[0], cid->sn[1], cid->sn[2]); -+ sprintf((char *) mmc_dev.product,"%s",cid->name); -+ sprintf((char *) mmc_dev.revision,"%x %x", -+ cid->hwrev, cid->fwrev); -+ } -+ else { -+ struct sd_cid *cid = (struct sd_cid *) resp; -+ -+ if (verbose) -+ print_sd_cid(cid); -+ sprintf((char *) mmc_dev.vendor, -+ "Man %02 OEM %c%c \"%c%c%c%c%c\"", -+ cid->mid, cid->oid_0, cid->oid_1, -+ cid->pnm_0, cid->pnm_1, cid->pnm_2, cid->pnm_3, -+ cid->pnm_4); -+ sprintf((char *) mmc_dev.product, "%d", -+ cid->psn_0 << 24 | cid->psn_1 << 16 | -+ cid->psn_2 << 8 | cid->psn_3); -+ sprintf((char *) mmc_dev.revision, "%d.%d", -+ cid->prv >> 4, cid->prv & 15); -+ } -+ -+ /* fill in device description */ -+ mmc_dev.if_type = IF_TYPE_MMC; -+ mmc_dev.part_type = PART_TYPE_DOS; -+ mmc_dev.dev = 0; -+ mmc_dev.lun = 0; -+ mmc_dev.type = 0; -+ /* FIXME fill in the correct size (is set to 32MByte) */ -+ mmc_dev.blksz = 512; -+ mmc_dev.lba = 0x10000; -+ mmc_dev.removable = 0; -+ mmc_dev.block_read = mmc_bread; -+ -+ /* MMC exists, get CSD too */ -+ resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, CMD_F_RESP); -+ if (is_sd) -+ rca = resp[0] >> 16; -+ -+ resp = mmc_cmd(MMC_CMD_SEND_CSD, rca<<16, CMD_F_RESP|CMD_F_RESP_LONG); -+ if (resp) { -+ mmc_csd_t *csd = (mmc_csd_t *)resp; -+ memcpy(&mmc_csd, csd, sizeof(csd)); -+ rc = 0; -+ mmc_ready = 1; -+ /* FIXME add verbose printout for csd */ -+ printf("READ_BL_LEN=%u, C_SIZE_MULT=%u, C_SIZE=%u\n", -+ csd->read_bl_len, csd->c_size_mult1, csd->c_size); -+ printf("size = %u\n", mmc_size(csd)); -+ } -+ } -+ -+ resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca<<16, CMD_F_RESP); -+ -+#ifdef CONFIG_MMC_WIDE -+ if (is_sd) { -+ resp = mmc_cmd(55, rca<<16, CMD_F_RESP); -+ resp = mmc_cmd(6, 0x02, CMD_F_RESP); -+ wide = 1; -+ } -+#endif -+ -+ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */ -+ -+ return rc; -+} -+ -+int -+mmc_ident(block_dev_desc_t *dev) -+{ -+ return 0; -+} -+ -+int -+mmc2info(ulong addr) -+{ -+ /* FIXME hard codes to 32 MB device */ -+ if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) -+ return 1; -+ -+ return 0; -+} -+ -+#endif /* CONFIG_MMC */ -Index: u-boot/include/asm-arm/arch-s3c24x0/mmc.h -=================================================================== ---- /dev/null -+++ u-boot/include/asm-arm/arch-s3c24x0/mmc.h -@@ -0,0 +1,112 @@ -+/* -+ * linux/drivers/mmc/mmc_pxa.h -+ * -+ * Author: Vladimir Shebordaev, Igor Oblakov -+ * Copyright: MontaVista Software Inc. -+ * -+ * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __MMC_PXA_P_H__ -+#define __MMC_PXA_P_H__ -+ -+#include <asm/arch/regs-sdi.h> -+ -+#define MMC_DEFAULT_RCA (1<<16) -+ -+#define MMC_BLOCK_SIZE 512 -+#define MMC_CMD_RESET 0 -+#define MMC_CMD_SEND_OP_COND 1 -+#define MMC_CMD_ALL_SEND_CID 2 -+#define MMC_CMD_SET_RCA 3 -+#define MMC_CMD_SELECT_CARD 7 -+#define MMC_CMD_SEND_CSD 9 -+#define MMC_CMD_SEND_CID 10 -+#define MMC_CMD_SEND_STATUS 13 -+#define MMC_CMD_SET_BLOCKLEN 16 -+#define MMC_CMD_READ_BLOCK 17 -+#define MMC_CMD_RD_BLK_MULTI 18 -+#define MMC_CMD_WRITE_BLOCK 24 -+ -+#define MMC_MAX_BLOCK_SIZE 512 -+ -+#define MMC_R1_IDLE_STATE 0x01 -+#define MMC_R1_ERASE_STATE 0x02 -+#define MMC_R1_ILLEGAL_CMD 0x04 -+#define MMC_R1_COM_CRC_ERR 0x08 -+#define MMC_R1_ERASE_SEQ_ERR 0x01 -+#define MMC_R1_ADDR_ERR 0x02 -+#define MMC_R1_PARAM_ERR 0x04 -+ -+#define MMC_R1B_WP_ERASE_SKIP 0x0002 -+#define MMC_R1B_ERR 0x0004 -+#define MMC_R1B_CC_ERR 0x0008 -+#define MMC_R1B_CARD_ECC_ERR 0x0010 -+#define MMC_R1B_WP_VIOLATION 0x0020 -+#define MMC_R1B_ERASE_PARAM 0x0040 -+#define MMC_R1B_OOR 0x0080 -+#define MMC_R1B_IDLE_STATE 0x0100 -+#define MMC_R1B_ERASE_RESET 0x0200 -+#define MMC_R1B_ILLEGAL_CMD 0x0400 -+#define MMC_R1B_COM_CRC_ERR 0x0800 -+#define MMC_R1B_ERASE_SEQ_ERR 0x1000 -+#define MMC_R1B_ADDR_ERR 0x2000 -+#define MMC_R1B_PARAM_ERR 0x4000 -+ -+typedef struct mmc_cid -+{ -+ /* FIXME: BYTE_ORDER */ -+ uchar year:4, -+ month:4; -+ uchar sn[3]; -+ uchar fwrev:4, -+ hwrev:4; -+ uchar name[6]; -+ uchar id[3]; -+} mmc_cid_t; -+ -+typedef struct mmc_csd -+{ -+ uchar ecc:2, -+ file_format:2, -+ tmp_write_protect:1, -+ perm_write_protect:1, -+ copy:1, -+ file_format_grp:1; -+ uint64_t content_prot_app:1, -+ rsvd3:4, -+ write_bl_partial:1, -+ write_bl_len:4, -+ r2w_factor:3, -+ default_ecc:2, -+ wp_grp_enable:1, -+ wp_grp_size:5, -+ erase_grp_mult:5, -+ erase_grp_size:5, -+ c_size_mult1:3, -+ vdd_w_curr_max:3, -+ vdd_w_curr_min:3, -+ vdd_r_curr_max:3, -+ vdd_r_curr_min:3, -+ c_size:12, -+ rsvd2:2, -+ dsr_imp:1, -+ read_blk_misalign:1, -+ write_blk_misalign:1, -+ read_bl_partial:1; -+ -+ ushort read_bl_len:4, -+ ccc:12; -+ uchar tran_speed; -+ uchar nsac; -+ uchar taac; -+ uchar rsvd1:2, -+ spec_vers:4, -+ csd_structure:2; -+} mmc_csd_t; -+ -+ -+#endif /* __MMC_PXA_P_H__ */ -Index: u-boot/include/asm-arm/arch-s3c24x0/regs-sdi.h -=================================================================== ---- /dev/null -+++ u-boot/include/asm-arm/arch-s3c24x0/regs-sdi.h -@@ -0,0 +1,110 @@ -+/* linux/include/asm/arch-s3c2410/regs-sdi.h -+ * -+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> -+ * http://www.simtec.co.uk/products/SWLINUX/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * S3C2410 MMC/SDIO register definitions -+ * -+ * Changelog: -+ * 18-Aug-2004 Ben Dooks Created initial file -+ * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates -+ * 29-Nov-2004 Ben Dooks Updated Koen's patch -+*/ -+ -+#ifndef __ASM_ARM_REGS_SDI -+#define __ASM_ARM_REGS_SDI "regs-sdi.h" -+ -+#define S3C2440_SDICON_SDRESET (1<<8) -+#define S3C2440_SDICON_MMCCLOCK (1<<5) -+#define S3C2410_SDICON_BYTEORDER (1<<4) -+#define S3C2410_SDICON_SDIOIRQ (1<<3) -+#define S3C2410_SDICON_RWAITEN (1<<2) -+#define S3C2410_SDICON_FIFORESET (1<<1) -+#define S3C2410_SDICON_CLOCKTYPE (1<<0) -+ -+#define S3C2410_SDICMDCON_ABORT (1<<12) -+#define S3C2410_SDICMDCON_WITHDATA (1<<11) -+#define S3C2410_SDICMDCON_LONGRSP (1<<10) -+#define S3C2410_SDICMDCON_WAITRSP (1<<9) -+#define S3C2410_SDICMDCON_CMDSTART (1<<8) -+#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -+#define S3C2410_SDICMDCON_INDEX (0x3f) -+ -+#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -+#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -+#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -+#define S3C2410_SDICMDSTAT_XFERING (1<<8) -+#define S3C2410_SDICMDSTAT_INDEX (0xff) -+ -+#define S3C2440_SDIDCON_DS_BYTE (0<<22) -+#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -+#define S3C2440_SDIDCON_DS_WORD (2<<22) -+#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -+#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -+#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -+#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -+#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -+#define S3C2410_SDIDCON_WIDEBUS (1<<16) -+#define S3C2410_SDIDCON_DMAEN (1<<15) -+#define S3C2410_SDIDCON_STOP (1<<14) -+#define S3C2440_SDIDCON_DATSTART (1<<14) -+#define S3C2410_SDIDCON_DATMODE (3<<12) -+#define S3C2410_SDIDCON_BLKNUM (0x7ff) -+ -+/* constants for S3C2410_SDIDCON_DATMODE */ -+#define S3C2410_SDIDCON_XFER_READY (0<<12) -+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -+#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -+#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) -+ -+#define S3C2410_SDIDCNT_BLKNUM_MASK (0xFFF) -+#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) -+ -+#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -+#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -+#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -+#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -+#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -+#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -+#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -+#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -+#define S3C2410_SDIDSTA_TXDATAON (1<<1) -+#define S3C2410_SDIDSTA_RXDATAON (1<<0) -+ -+#define S3C2440_SDIFSTA_FIFORESET (1<<16) -+#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -+#define S3C2410_SDIFSTA_TFDET (1<<13) -+#define S3C2410_SDIFSTA_RFDET (1<<12) -+#define S3C2410_SDIFSTA_TFHALF (1<<11) -+#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -+#define S3C2410_SDIFSTA_RFLAST (1<<9) -+#define S3C2410_SDIFSTA_RFFULL (1<<8) -+#define S3C2410_SDIFSTA_RFHALF (1<<7) -+#define S3C2410_SDIFSTA_COUNTMASK (0x7f) -+ -+#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -+#define S3C2410_SDIIMSK_CMDSENT (1<<16) -+#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -+#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -+#define S3C2410_SDIIMSK_READWAIT (1<<13) -+#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -+#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -+#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -+#define S3C2410_SDIIMSK_DATACRC (1<<9) -+#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -+#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -+#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -+#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -+#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -+#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -+#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -+#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -+#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) -+ -+#endif /* __ASM_ARM_REGS_SDI */ -Index: u-boot/include/s3c24x0.h -=================================================================== ---- u-boot.orig/include/s3c24x0.h -+++ u-boot/include/s3c24x0.h -@@ -637,13 +637,7 @@ - S3C24X0_REG32 SDIDCNT; - S3C24X0_REG32 SDIDSTA; - S3C24X0_REG32 SDIFSTA; --#ifdef __BIG_ENDIAN -- S3C24X0_REG8 res[3]; -- S3C24X0_REG8 SDIDAT; --#else -- S3C24X0_REG8 SDIDAT; -- S3C24X0_REG8 res[3]; --#endif -+ S3C24X0_REG32 SDIDAT; - S3C24X0_REG32 SDIIMSK; - } /*__attribute__((__packed__))*/ S3C2410_SDI; - -@@ -1123,11 +1117,7 @@ - #define rSDIDatCnt (*(volatile unsigned *)0x5A000030) - #define rSDIDatSta (*(volatile unsigned *)0x5A000034) - #define rSDIFSTA (*(volatile unsigned *)0x5A000038) --#ifdef __BIG_ENDIAN --#define rSDIDAT (*(volatile unsigned char *)0x5A00003F) --#else --#define rSDIDAT (*(volatile unsigned char *)0x5A00003C) --#endif -+#define rSDIDAT (*(volatile unsigned *)0x5A00003C) - #define rSDIIntMsk (*(volatile unsigned *)0x5A000040) - - #endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-nand.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-nand.patch deleted file mode 100644 index dc363bbbab..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-nand.patch +++ /dev/null @@ -1,525 +0,0 @@ -This patch adds NAND (including boot-from-NAND via steppingstone) support to -the S3C2410 SoC code in u-boot - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/cpu/arm920t/s3c24x0/Makefile -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/Makefile 2007-02-28 03:47:44.000000000 +0100 -+++ u-boot/cpu/arm920t/s3c24x0/Makefile 2007-03-01 14:29:32.000000000 +0100 -@@ -26,7 +26,7 @@ - LIB = $(obj)lib$(SOC).a - - COBJS = i2c.o interrupts.o serial.o speed.o \ -- usb_ohci.o -+ usb_ohci.o nand_read.o nand.o - - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) - OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -Index: u-boot/cpu/arm920t/s3c24x0/nand.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ u-boot/cpu/arm920t/s3c24x0/nand.c 2007-03-01 14:30:27.000000000 +0100 -@@ -0,0 +1,225 @@ -+/* -+ * (C) Copyright 2006 OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+#if 0 -+#define DEBUGN printf -+#else -+#define DEBUGN(x, args ...) {} -+#endif -+ -+#if (CONFIG_COMMANDS & CFG_CMD_NAND) -+#if !defined(CFG_NAND_LEGACY) -+ -+#include <nand.h> -+#include <s3c2410.h> -+ -+#define __REGb(x) (*(volatile unsigned char *)(x)) -+#define __REGi(x) (*(volatile unsigned int *)(x)) -+ -+#define NF_BASE 0x4e000000 -+#define NFCONF __REGi(NF_BASE + 0x0) -+#define NFCMD __REGb(NF_BASE + 0x4) -+#define NFADDR __REGb(NF_BASE + 0x8) -+#define NFDATA __REGb(NF_BASE + 0xc) -+#define NFSTAT __REGb(NF_BASE + 0x10) -+#define NFECC0 __REGb(NF_BASE + 0x14) -+#define NFECC1 __REGb(NF_BASE + 0x15) -+#define NFECC2 __REGb(NF_BASE + 0x16) -+ -+#define S3C2410_NFCONF_EN (1<<15) -+#define S3C2410_NFCONF_512BYTE (1<<14) -+#define S3C2410_NFCONF_4STEP (1<<13) -+#define S3C2410_NFCONF_INITECC (1<<12) -+#define S3C2410_NFCONF_nFCE (1<<11) -+#define S3C2410_NFCONF_TACLS(x) ((x)<<8) -+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) -+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) -+ -+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ DEBUGN("hwcontrol(): 0x%02x: ", cmd); -+ -+ switch (cmd) { -+ case NAND_CTL_SETNCE: -+ NFCONF &= ~S3C2410_NFCONF_nFCE; -+ DEBUGN("NFCONF=0x%08x\n", NFCONF); -+ break; -+ case NAND_CTL_CLRNCE: -+ NFCONF |= S3C2410_NFCONF_nFCE; -+ DEBUGN("NFCONF=0x%08x\n", NFCONF); -+ break; -+ case NAND_CTL_SETALE: -+ chip->IO_ADDR_W = NF_BASE + 0x8; -+ DEBUGN("SETALE\n"); -+ break; -+ case NAND_CTL_SETCLE: -+ chip->IO_ADDR_W = NF_BASE + 0x4; -+ DEBUGN("SETCLE\n"); -+ break; -+ default: -+ chip->IO_ADDR_W = NF_BASE + 0xc; -+ break; -+ } -+ return; -+} -+ -+static int s3c2410_dev_ready(struct mtd_info *mtd) -+{ -+ DEBUGN("dev_ready\n"); -+ return (NFSTAT & 0x01); -+} -+ -+static void s3c2410_cmdfunc(struct mtd_info *mtd, unsigned cmd, -+ int column, int page_addr) -+{ -+ DEBUGN("cmdfunc(): 0x%02x, col=%d, page=%d\n", cmd, column, page_addr); -+ -+ switch (cmd) { -+ case NAND_CMD_READ0: -+ case NAND_CMD_READ1: -+ case NAND_CMD_READOOB: -+ NFCMD = cmd; -+ NFADDR = column & 0xff; -+ NFADDR = page_addr & 0xff; -+ NFADDR = (page_addr >> 8) & 0xff; -+ NFADDR = (page_addr >> 16) & 0xff; -+ break; -+ case NAND_CMD_READID: -+ NFCMD = cmd; -+ NFADDR = 0; -+ break; -+ case NAND_CMD_PAGEPROG: -+ NFCMD = cmd; -+ printf("PAGEPROG not implemented\n"); -+ break; -+ case NAND_CMD_ERASE1: -+ NFCMD = cmd; -+ NFADDR = page_addr & 0xff; -+ NFADDR = (page_addr >> 8) & 0xff; -+ NFADDR = (page_addr >> 16) & 0xff; -+ break; -+ case NAND_CMD_ERASE2: -+ NFCMD = cmd; -+ break; -+ case NAND_CMD_SEQIN: -+ printf("SEQIN not implemented\n"); -+ break; -+ case NAND_CMD_STATUS: -+ NFCMD = cmd; -+ break; -+ case NAND_CMD_RESET: -+ NFCMD = cmd; -+ break; -+ default: -+ break; -+ } -+ -+ while (!s3c2410_dev_ready(mtd)); -+} -+ -+#ifdef CONFIG_S3C2410_NAND_HWECC -+void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) -+{ -+ DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd ,mode); -+ NFCONF |= S3C2410_NFCONF_INITECC; -+} -+ -+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) -+{ -+ ecc_code[0] = NFECC0; -+ ecc_code[1] = NFECC1; -+ ecc_code[2] = NFECC2; -+ DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", mtd , ecc_code[0], ecc_code[1], ecc_code[2]); -+ -+ return 0; -+} -+ -+int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) -+{ -+ if (read_ecc[0] == calc_ecc[0] && -+ read_ecc[1] == calc_ecc[1] && -+ read_ecc[2] == calc_ecc[2]) -+ return 0; -+ -+ printf("s3c2410_nand_correct_data: not implemented\n"); -+ return -1; -+} -+#endif -+ -+int board_nand_init(struct nand_chip *nand) -+{ -+ u_int32_t cfg; -+ u_int8_t tacls, twrph0, twrph1; -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ -+ DEBUGN("board_nand_init()\n"); -+ -+ clk_power->CLKCON |= (1 << 4); -+ -+ /* initialize hardware */ -+ twrph0 = 3; twrph1 = 0; tacls = 0; -+ -+ cfg = S3C2410_NFCONF_EN; -+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1); -+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); -+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); -+ -+ NFCONF = cfg; -+ //NFCONF = 0xf842; -+ -+ /* initialize nand_chip data structure */ -+ nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c; -+ -+ /* read_buf and write_buf are default */ -+ /* read_byte and write_byte are default */ -+ -+ /* hwcontrol always must be implemented */ -+ nand->hwcontrol = s3c2410_hwcontrol; -+ -+ nand->dev_ready = s3c2410_dev_ready; -+ -+#ifdef CONFIG_S3C2410_NAND_HWECC -+ nand->enable_hwecc = s3c2410_nand_enable_hwecc; -+ nand->calculate_ecc = s3c2410_nand_calculate_ecc; -+ nand->correct_data = s3c2410_nand_correct_data; -+ nand->eccmode = NAND_ECC_HW3_512; -+#else -+ nand->eccmode = NAND_ECC_SOFT; -+#endif -+ -+#ifdef CONFIG_S3C2410_NAND_BBT -+ nand->options = NAND_USE_FLASH_BBT; -+#else -+ nand->options = 0; -+#endif -+ -+ DEBUGN("end of nand_init\n"); -+ -+ return 0; -+} -+ -+#else -+ #error "U-Boot legacy NAND support not available for S3C2410" -+#endif -+#endif -Index: u-boot/cpu/arm920t/s3c24x0/nand_read.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ u-boot/cpu/arm920t/s3c24x0/nand_read.c 2007-02-28 03:51:24.000000000 +0100 -@@ -0,0 +1,98 @@ -+/* -+ * nand_read.c: Simple NAND read functions for booting from NAND -+ * -+ * This is used by cpu/arm920/start.S assembler code, -+ * and the board-specific linker script must make sure this -+ * file is linked within the first 4kB of NAND flash. -+ * -+ * Taken from GPLv2 licensed vivi bootloader, -+ * Copyright (C) 2002 MIZI Research, Inc. -+ * -+ * Author: Hwang, Chideok <hwang@mizi.com> -+ * Date : $Date: 2004/02/04 10:37:37 $ -+ * -+ * u-boot integration and bad-block skipping (C) 2006 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ */ -+ -+#include <common.h> -+ -+#ifdef CONFIG_S3C2410_NAND_BOOT -+ -+#define __REGb(x) (*(volatile unsigned char *)(x)) -+#define __REGi(x) (*(volatile unsigned int *)(x)) -+#define NF_BASE 0x4e000000 -+#define NFCONF __REGi(NF_BASE + 0x0) -+#define NFCMD __REGb(NF_BASE + 0x4) -+#define NFADDR __REGb(NF_BASE + 0x8) -+#define NFDATA __REGb(NF_BASE + 0xc) -+#define NFSTAT __REGb(NF_BASE + 0x10) -+ -+#define BUSY 1 -+inline void wait_idle(void) -+{ -+ int i; -+ -+ while (!(NFSTAT & BUSY)) -+ for (i=0; i<10; i++); -+} -+ -+#define NAND_SECTOR_SIZE 512 -+#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1) -+#define NAND_PAGE_SIZE 0x4000 -+ -+/* low level nand read function */ -+int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size) -+{ -+ int i, j; -+ -+ if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) -+ return -1; /* invalid alignment */ -+ -+ /* chip Enable */ -+ NFCONF &= ~0x800; -+ for (i=0; i<10; i++); -+ -+ for (i=start_addr; i < (start_addr + size);) { -+#ifdef CONFIG_S3C2410_NAND_SKIP_BAD -+ if (start_addr % NAND_PAGE_SIZE == 0) { -+ unsigned char data; -+ NFCMD = 0x50; -+ NFADDR = 517&0xf; -+ NFADDR = (i >> 9) & 0xff; -+ NFADDR = (i >> 17) & 0xff; -+ NFADDR = (i >> 25) & 0xff; -+ wait_idle(); -+ data = (NFDATA & 0xff); -+ if (data != 0xff) { -+ /* Bad block */ -+ i += NAND_PAGE_SIZE; -+ size += NAND_PAGE_SIZE; -+ continue; -+ } -+ } -+#endif -+ /* READ0 */ -+ NFCMD = 0; -+ -+ /* Write Address */ -+ NFADDR = i & 0xff; -+ NFADDR = (i >> 9) & 0xff; -+ NFADDR = (i >> 17) & 0xff; -+ NFADDR = (i >> 25) & 0xff; -+ -+ wait_idle(); -+ -+ for (j=0; j < NAND_SECTOR_SIZE; j++, i++) { -+ *buf = (NFDATA & 0xff); -+ buf++; -+ } -+ } -+ -+ /* chip Disable */ -+ NFCONF |= 0x800; /* chip disable */ -+ -+ return 0; -+} -+ -+#endif /* CONFIG_S3C2410_NAND_BOOT */ -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S 2007-02-28 03:47:44.000000000 +0100 -+++ u-boot/cpu/arm920t/start.S 2007-03-01 14:29:22.000000000 +0100 -@@ -5,6 +5,10 @@ - * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> - * Copyright (c) 2002 Gary Jennejohn <gj@denx.de> - * -+ * S3C2410 NAND portions -+ * Copyright (c) 2001 MIZI Research, Inc. -+ * Copyright (c) 2006 OpenMoko, Inc. (Harald Welte <laforge@openmmoko.org> -+ * - * See file CREDITS for list of people who contributed to this - * project. - * -@@ -27,6 +31,7 @@ - - #include <config.h> - #include <version.h> -+#include <s3c2410.h> - - - /* -@@ -161,6 +166,7 @@ - #endif - - #ifndef CONFIG_SKIP_RELOCATE_UBOOT -+#ifndef CONFIG_S3C2410_NAND_BOOT - relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ -@@ -177,6 +183,93 @@ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end addreee [r2] */ - ble copy_loop -+#else /* NAND_BOOT */ -+relocate: -+copy_myself: -+ /* mov r10, lr */ -+ -+ @ reset NAND -+ mov r1, #S3C2410_NAND_BASE -+ ldr r2, =0xf842 @ initial value enable tacls=3,rph0=6,rph1=0 -+ str r2, [r1, #oNFCONF] -+ ldr r2, [r1, #oNFCONF] -+ bic r2, r2, #0x800 @ enable chip -+ str r2, [r1, #oNFCONF] -+ mov r2, #0xff @ RESET command -+ strb r2, [r1, #oNFCMD] -+ mov r3, #0 @ wait -+1: add r3, r3, #0x1 -+ cmp r3, #0xa -+ blt 1b -+2: ldr r2, [r1, #oNFSTAT] @ wait ready -+ tst r2, #0x1 -+ beq 2b -+ ldr r2, [r1, #oNFCONF] -+ orr r2, r2, #0x800 @ disable chip -+ str r2, [r1, #oNFCONF] -+ -+#if 0 -+ @ get ready to call C functions (for nand_read()) -+ ldr sp, DW_STACK_START @ setup stack pointer -+ mov fp, #0 @ no previous frame, so fp=0 -+#else -+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ -+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ -+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ -+#ifdef CONFIG_USE_IRQ -+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -+#endif -+ sub sp, r0, #12 /* leave 3 words for abort-stack */ -+#endif -+ -+ @ copy u-boot to RAM -+ ldr r0, _TEXT_BASE -+ mov r1, #0x0 -+ mov r2, #CFG_UBOOT_SIZE -+ bl nand_read_ll -+ -+ tst r0, #0x0 -+ beq ok_nand_read -+#ifdef CONFIG_DEBUG_LL -+bad_nand_read: -+ ldr r0, STR_FAIL -+ ldr r1, SerBase -+ bl PrintWord -+1: b 1b @ infinite loop -+#endif -+ -+ok_nand_read: -+#ifdef CONFIG_DEBUG_LL -+ ldr r0, STR_OK -+ ldr r1, SerBase -+ bl PrintWord -+#endif -+ -+ @ verify -+ mov r0, #0 -+ @ldr r1, =0x33f00000 -+ ldr r1, _TEXT_BASE -+ mov r2, #0x400 @ 4 bytes * 1024 = 4K-bytes -+go_next: -+ ldr r3, [r0], #4 -+ ldr r4, [r1], #4 -+ teq r3, r4 -+ bne notmatch -+ subs r2, r2, #4 -+ beq done_nand_read -+ bne go_next -+notmatch: -+#ifdef CONFIG_DEBUG_LL -+ sub r0, r0, #4 -+ ldr r1, SerBase -+ bl PrintHexWord -+ ldr r0, STR_FAIL -+ ldr r1, SerBase -+ bl PrintWord -+#endif -+1: b 1b -+done_nand_read: -+#endif /* NAND_BOOT */ - #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -Index: u-boot/include/s3c2410.h -=================================================================== ---- u-boot.orig/include/s3c2410.h 2007-02-28 03:51:24.000000000 +0100 -+++ u-boot/include/s3c2410.h 2007-03-01 14:29:22.000000000 +0100 -@@ -38,12 +38,6 @@ - #define S3C2410_ECCSIZE 512 - #define S3C2410_ECCBYTES 3 - --typedef enum { -- S3C24X0_UART0, -- S3C24X0_UART1, -- S3C24X0_UART2 --} S3C24X0_UARTS_NR; -- - /* S3C2410 device base addresses */ - #define S3C24X0_MEMCTL_BASE 0x48000000 - #define S3C24X0_USB_HOST_BASE 0x49000000 -@@ -65,9 +59,23 @@ - #define S3C2410_SDI_BASE 0x5A000000 - - -+#define oNFCONF 0x00 -+#define oNFCMD 0x04 -+#define oNFADDR 0x08 -+#define oNFDATA 0x0C -+#define oNFSTAT 0x10 -+#define oNFECC 0x14 -+ -+#ifndef __ASSEMBLER__ -+ - /* include common stuff */ - #include <s3c24x0.h> - -+typedef enum { -+ S3C24X0_UART0, -+ S3C24X0_UART1, -+ S3C24X0_UART2 -+} S3C24X0_UARTS_NR; - - static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void) - { -@@ -142,6 +150,7 @@ - return (S3C2410_SDI * const)S3C2410_SDI_BASE; - } - -+#endif - - /* ISR */ - #define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0)) diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-norelocate_irqvec_cpy.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-norelocate_irqvec_cpy.patch deleted file mode 100644 index 0d5a49771d..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-norelocate_irqvec_cpy.patch +++ /dev/null @@ -1,32 +0,0 @@ -If we've somehow magically make u-boot end up in RAM (JTAG, ...), then that RAM -is mapped to 0x30000000 and not 0, so we need to copy the interrupt vectors, etc. - -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S -+++ u-boot/cpu/arm920t/start.S -@@ -332,7 +332,23 @@ done_nand_read: - strb r1, [r0] - #endif /* CONFIG_S3C2410_NAND_BOOT */ - done_relocate: --#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ -+ -+#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C2410) -+ /* In the case of the S3C2410, if we've somehow magically (JTAG, ...) -+ ended up in RAM, then that ram is mapped to 0x30000000 and not 0. -+ So we need to copy the interrupt vectors, etc. */ -+ -+ mov r0, #0 -+ ldr r1, _TEXT_BASE -+ mov r2, #0x40 -+irqvec_cpy_next: -+ ldr r3, [r1], #4 -+ str r3, [r0], #4 -+ subs r2, r2, #4 -+ bne irqvec_cpy_next -+#endif /* CONFIG_USE_IRQ */ -+ -+#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ - stack_setup: diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-warnings-fix.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-warnings-fix.patch deleted file mode 100644 index 8cc442a865..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-warnings-fix.patch +++ /dev/null @@ -1,98 +0,0 @@ -Index: u-boot/include/s3c2410.h -=================================================================== ---- u-boot.orig/include/s3c2410.h 2007-02-16 23:53:20.000000000 +0100 -+++ u-boot/include/s3c2410.h 2007-02-16 23:53:21.000000000 +0100 -@@ -69,75 +69,75 @@ - #include <s3c24x0.h> - - --static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void) -+static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void) - { - return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE; - } --static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void) -+static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void) - { - return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE; - } --static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void) -+static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void) - { - return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE; - } --static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void) -+static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void) - { - return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE; - } --static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void) -+static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void) - { - return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE; - } --static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void) -+static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void) - { - return (S3C24X0_LCD * const)S3C24X0_LCD_BASE; - } --static inline S3C2410_NAND * const S3C2410_GetBase_NAND(void) -+static inline S3C2410_NAND * S3C2410_GetBase_NAND(void) - { - return (S3C2410_NAND * const)S3C2410_NAND_BASE; - } --static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) -+static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) - { - return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000)); - } --static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void) -+static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void) - { - return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE; - } --static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void) -+static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void) - { - return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE; - } --static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void) -+static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void) - { - return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE; - } --static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void) -+static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void) - { - return (S3C24X0_I2C * const)S3C24X0_I2C_BASE; - } --static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void) -+static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void) - { - return (S3C24X0_I2S * const)S3C24X0_I2S_BASE; - } --static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void) -+static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void) - { - return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE; - } --static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void) -+static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void) - { - return (S3C24X0_RTC * const)S3C24X0_RTC_BASE; - } --static inline S3C2410_ADC * const S3C2410_GetBase_ADC(void) -+static inline S3C2410_ADC * S3C2410_GetBase_ADC(void) - { - return (S3C2410_ADC * const)S3C2410_ADC_BASE; - } --static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void) -+static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void) - { - return (S3C24X0_SPI * const)S3C24X0_SPI_BASE; - } --static inline S3C2410_SDI * const S3C2410_GetBase_SDI(void) -+static inline S3C2410_SDI * S3C2410_GetBase_SDI(void) - { - return (S3C2410_SDI * const)S3C2410_SDI_BASE; - } diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_fb.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_fb.patch deleted file mode 100644 index b50853554b..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_fb.patch +++ /dev/null @@ -1,215 +0,0 @@ -Index: u-boot/drivers/Makefile -=================================================================== ---- u-boot.orig/drivers/Makefile -+++ u-boot/drivers/Makefile -@@ -52,7 +52,7 @@ - ks8695eth.o \ - pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ - rpx_pcmcia.o \ -- fsl_i2c.o -+ fsl_i2c.o s3c2410_fb.o - - SRCS := $(COBJS:.o=.c) - OBJS := $(addprefix $(obj),$(COBJS)) -Index: u-boot/drivers/s3c2410_fb.c -=================================================================== ---- /dev/null -+++ u-boot/drivers/s3c2410_fb.c -@@ -0,0 +1,166 @@ -+/* -+ * (C) Copyright 2006 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+#if defined(CONFIG_VIDEO_S3C2410) -+ -+#include <video_fb.h> -+#include "videomodes.h" -+#include <s3c2410.h> -+/* -+ * Export Graphic Device -+ */ -+GraphicDevice smi; -+ -+#define VIDEO_MEM_SIZE 0x200000 /* 480x640x16bit = 614400 bytes */ -+ -+extern void board_video_init(GraphicDevice *pGD); -+ -+/******************************************************************************* -+ * -+ * Init video chip with common Linux graphic modes (lilo) -+ */ -+void *video_hw_init (void) -+{ -+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); -+ GraphicDevice *pGD = (GraphicDevice *)&smi; -+ int videomode; -+ unsigned long t1, hsynch, vsynch; -+ char *penv; -+ int tmp, i, bits_per_pixel; -+ struct ctfb_res_modes *res_mode; -+ struct ctfb_res_modes var_mode; -+ unsigned char videoout; -+ -+ /* Search for video chip */ -+ printf("Video: "); -+ -+ tmp = 0; -+ -+ videomode = CFG_DEFAULT_VIDEO_MODE; -+ /* get video mode via environment */ -+ if ((penv = getenv ("videomode")) != NULL) { -+ /* deceide if it is a string */ -+ if (penv[0] <= '9') { -+ videomode = (int) simple_strtoul (penv, NULL, 16); -+ tmp = 1; -+ } -+ } else { -+ tmp = 1; -+ } -+ if (tmp) { -+ /* parameter are vesa modes */ -+ /* search params */ -+ for (i = 0; i < VESA_MODES_COUNT; i++) { -+ if (vesa_modes[i].vesanr == videomode) -+ break; -+ } -+ if (i == VESA_MODES_COUNT) { -+ printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE); -+ i = 0; -+ } -+ res_mode = -+ (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i]. -+ resindex]; -+ bits_per_pixel = vesa_modes[i].bits_per_pixel; -+ } else { -+ -+ res_mode = (struct ctfb_res_modes *) &var_mode; -+ bits_per_pixel = video_get_params (res_mode, penv); -+ } -+ -+ /* calculate hsynch and vsynch freq (info only) */ -+ t1 = (res_mode->left_margin + res_mode->xres + -+ res_mode->right_margin + res_mode->hsync_len) / 8; -+ t1 *= 8; -+ t1 *= res_mode->pixclock; -+ t1 /= 1000; -+ hsynch = 1000000000L / t1; -+ t1 *= -+ (res_mode->upper_margin + res_mode->yres + -+ res_mode->lower_margin + res_mode->vsync_len); -+ t1 /= 1000; -+ vsynch = 1000000000L / t1; -+ -+ /* fill in Graphic device struct */ -+ sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres, -+ res_mode->yres, bits_per_pixel, (hsynch / 1000), -+ (vsynch / 1000)); -+ printf ("%s\n", pGD->modeIdent); -+ pGD->winSizeX = res_mode->xres; -+ pGD->winSizeY = res_mode->yres; -+ pGD->plnSizeX = res_mode->xres; -+ pGD->plnSizeY = res_mode->yres; -+ switch (bits_per_pixel) { -+ case 8: -+ pGD->gdfBytesPP = 1; -+ pGD->gdfIndex = GDF__8BIT_INDEX; -+ break; -+ case 15: -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_15BIT_555RGB; -+ break; -+ case 16: -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_16BIT_565RGB; -+ break; -+ case 24: -+ pGD->gdfBytesPP = 3; -+ pGD->gdfIndex = GDF_24BIT_888RGB; -+ break; -+ } -+ -+ /* statically configure settings */ -+ pGD->winSizeX = pGD->plnSizeX = 480; -+ pGD->winSizeY = pGD->plnSizeY = 640; -+ pGD->gdfBytesPP = 2; -+ pGD->gdfIndex = GDF_16BIT_565RGB; -+ -+ pGD->frameAdrs = LCD_VIDEO_ADDR; -+ pGD->memSize = VIDEO_MEM_SIZE; -+ -+ board_video_init(pGD); -+ -+ lcd->LCDSADDR1 = pGD->frameAdrs >> 1; -+ -+ /* This marks the end of the frame buffer. */ -+ lcd->LCDSADDR2 = (lcd->LCDSADDR1&0x1fffff) + (pGD->winSizeX+0) * pGD->winSizeY; -+ lcd->LCDSADDR3 = pGD->winSizeX; -+ -+ /* Clear video memory */ -+ memset(pGD->frameAdrs, 0, pGD->memSize); -+ -+ /* Enable Display */ -+ lcd->LCDCON1 |= 0x01; /* ENVID = 1 */ -+ -+ return ((void*)&smi); -+} -+ -+void -+video_set_lut (unsigned int index, /* color number */ -+ unsigned char r, /* red */ -+ unsigned char g, /* green */ -+ unsigned char b /* blue */ -+ ) -+{ -+} -+ -+#endif /* CONFIG_VIDEO_S3C2410 */ -Index: u-boot/drivers/cfb_console.c -=================================================================== ---- u-boot.orig/drivers/cfb_console.c -+++ u-boot/drivers/cfb_console.c -@@ -141,6 +141,14 @@ - #endif - - /*****************************************************************************/ -+/* Defines for the S3C2410 driver */ -+/*****************************************************************************/ -+#ifdef CONFIG_VIDEO_S3C2410 -+/* it actually is little-endian, but the host CPU, too ! */ -+//#define VIDEO_FB_LITTLE_ENDIAN -+#endif -+ -+/*****************************************************************************/ - /* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc */ - /*****************************************************************************/ - #include <video_fb.h> -@@ -307,6 +315,11 @@ - #define SHORTSWAP32(x) (x) - #endif - -+#ifdef CONFIG_VIDEO_S3C2410 -+#undef SHORTSWAP32 -+#define SHORTSWAP32(x) ((((x) & 0xffff) << 16) | (((x) >> 16) & 0xffff)) -+#endif -+ - #if defined(DEBUG) || defined(DEBUG_CFB_CONSOLE) - #define PRINTD(x) printf(x) - #else diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_udc.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_udc.patch deleted file mode 100644 index 16bee3e26a..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_udc.patch +++ /dev/null @@ -1,1263 +0,0 @@ -USB Device Controller Driver for Samsung S3C2410 SoC - -Index: u-boot/drivers/Makefile -=================================================================== ---- u-boot.orig/drivers/Makefile -+++ u-boot/drivers/Makefile -@@ -47,7 +47,7 @@ - status_led.o sym53c8xx.o systemace.o ahci.o \ - ti_pci1410a.o tigon3.o tsec.o \ - tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ -- usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \ -+ usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ - videomodes.o w83c553f.o \ - ks8695eth.o \ - pcf50606.o \ -Index: u-boot/drivers/usbdcore_s3c2410.c -=================================================================== ---- /dev/null -+++ u-boot/drivers/usbdcore_s3c2410.c -@@ -0,0 +1,730 @@ -+/* S3C2410 USB Device Controller Driver for u-boot -+ * -+ * (C) Copyright 2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * based on Linux' s3c2410_udc.c, which is -+ * Copyright (C) 2004-2006 Herbert Pötzl - Arnaud Patard -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ */ -+ -+#include <config.h> -+ -+#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE) -+ -+#include <common.h> -+ -+/* we can't use the regular debug macros since the console might be -+ * set to usbtty, which would cause deadlocks! */ -+#ifdef DEBUG -+#undef debug -+#undef debugX -+#define debug(fmt,args...) serial_printf (fmt ,##args) -+#define debugX(level,fmt,args...) if (DEBUG>=level) serial_printf(fmt,##args) -+#endif -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#include <asm/io.h> -+#include <s3c2410.h> -+ -+#include "usbdcore.h" -+#include "usbdcore_s3c2410.h" -+#include "usbdcore_ep0.h" -+#include <usb_cdc_acm.h> -+ -+enum ep0_state { -+ EP0_IDLE, -+ EP0_IN_DATA_PHASE, -+ EP0_OUT_DATA_PHASE, -+ EP0_END_XFER, -+ EP0_STALL, -+}; -+ -+static struct urb *ep0_urb = NULL; -+ -+static struct usb_device_instance *udc_device; /* Used in interrupt handler */ -+ -+static inline int fifo_count_out(void) -+{ -+ int tmp; -+ -+ tmp = inl(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8; -+ tmp |= inl(S3C2410_UDC_OUT_FIFO_CNT1_REG); -+ -+ return tmp & 0xffff; -+} -+ -+static const unsigned long ep_fifo_reg[S3C2410_UDC_NUM_ENDPOINTS] = { -+ S3C2410_UDC_EP0_FIFO_REG, -+ S3C2410_UDC_EP1_FIFO_REG, -+ S3C2410_UDC_EP2_FIFO_REG, -+ S3C2410_UDC_EP3_FIFO_REG, -+ S3C2410_UDC_EP4_FIFO_REG, -+}; -+ -+static int s3c2410_write_noniso_tx_fifo(struct usb_endpoint_instance *endpoint) -+{ -+ struct urb *urb = endpoint->tx_urb; -+ unsigned int last, i; -+ unsigned int ep = endpoint->endpoint_address & 0x7f; -+ unsigned long fifo_reg = ep_fifo_reg[ep]; -+ -+ /* WARNING: don't ever put serial debug printf's in non-error codepaths -+ * here, it is called from the time critical EP0 codepath ! */ -+ -+ if (!urb || ep >= S3C2410_UDC_NUM_ENDPOINTS) { -+ serial_printf("no urb or wrong endpoint\n"); -+ return -1; -+ } -+ -+ S3C2410_UDC_SETIX(ep); -+ if ((last = MIN(urb->actual_length - endpoint->sent, -+ endpoint->tx_packetSize))) { -+ u8 *cp = urb->buffer + endpoint->sent; -+ -+ for (i = 0; i < last; i++) -+ outb(*(cp+i), fifo_reg); -+ } -+ endpoint->last = last; -+ -+ if (endpoint->sent + last < urb->actual_length) { -+ /* not all data has been transmitted so far */ -+ return 0; -+ } -+ -+ if (last == endpoint->tx_packetSize) { -+ /* we need to send one more packet (ZLP) */ -+ return 0; -+ } -+ -+ return 1; -+} -+ -+ -+static void s3c2410_deconfigure_device (void) -+{ -+ /* FIXME: Implement this */ -+} -+ -+static void s3c2410_configure_device (struct usb_device_instance *device) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ S3C24X0_CLOCK_POWER * const cpower = S3C24X0_GetBase_CLOCK_POWER(); -+ -+ /* disable EP0-4 SUBD interrupts ? */ -+ outl(0x00, S3C2410_UDC_USB_INT_EN_REG); -+ -+ /* UPLL already configured by board-level init code */ -+ -+ /* configure USB pads to device mode */ -+ gpio->MISCCR &= ~(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND1); -+ -+ /* don't disable USB clock */ -+ cpower->CLKSLOW &= ~S3C2410_CLKSLOW_UCLK_OFF; -+ -+ /* clear interrupt registers */ -+ inl(S3C2410_UDC_EP_INT_REG); -+ inl(S3C2410_UDC_USB_INT_REG); -+ outl(0xff, S3C2410_UDC_EP_INT_REG); -+ outl(0xff, S3C2410_UDC_USB_INT_REG); -+ -+ /* enable USB interrupts for RESET and SUSPEND/RESUME */ -+ outl(S3C2410_UDC_USBINT_RESET|S3C2410_UDC_USBINT_SUSPEND, -+ S3C2410_UDC_USB_INT_EN_REG); -+} -+ -+static void udc_set_address(unsigned char address) -+{ -+ address |= 0x80; /* ADDR_UPDATE bit */ -+ outl(address, S3C2410_UDC_FUNC_ADDR_REG); -+} -+ -+extern struct usb_device_descriptor device_descriptor; -+ -+static void s3c2410_udc_ep0(void) -+{ -+ u_int8_t ep0csr; -+ struct usb_endpoint_instance *ep0 = udc_device->bus->endpoint_array; -+ -+ S3C2410_UDC_SETIX(0); -+ ep0csr = inl(S3C2410_UDC_IN_CSR1_REG); -+ -+ /* clear stall status */ -+ if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { -+ serial_printf("Clearing SENT_STALL\n"); -+ clear_ep0_sst(); -+ if (ep0csr & S3C2410_UDC_EP0_CSR_SOPKTRDY) -+ clear_ep0_opr(); -+ ep0->state = EP0_IDLE; -+ return; -+ } -+ -+ /* clear setup end */ -+ if (ep0csr & S3C2410_UDC_EP0_CSR_SE -+ /* && ep0->state != EP0_IDLE */) { -+ serial_printf("Clearing SETUP_END\n"); -+ clear_ep0_se(); -+#if 1 -+ if (ep0csr & S3C2410_UDC_EP0_CSR_SOPKTRDY) { -+ /* Flush FIFO */ -+ while (inl(S3C2410_UDC_OUT_FIFO_CNT1_REG)) -+ inl(S3C2410_UDC_EP0_FIFO_REG); -+ clear_ep0_opr(); -+ } -+#endif -+ ep0->state = EP0_IDLE; -+ return; -+ } -+ -+ /* Don't ever put [serial] debugging in non-error codepaths here, it -+ * will violate the tight timing constraints of this USB Device -+ * controller (and lead to bus enumeration failures) */ -+ -+ switch (ep0->state) { -+ int i, fifo_count; -+ unsigned char *datap; -+ case EP0_IDLE: -+ if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY)) -+ break; -+ -+ datap = (unsigned char *) &ep0_urb->device_request; -+ /* host->device packet has been received */ -+ -+ /* pull it out of the fifo */ -+ fifo_count = fifo_count_out(); -+ for (i = 0; i < fifo_count; i++) { -+ *datap = (unsigned char)inl(S3C2410_UDC_EP0_FIFO_REG); -+ datap++; -+ } -+ if (fifo_count != 8) { -+ debug("STRANGE FIFO COUNT: %u bytes\n", fifo_count); -+ set_ep0_ss(); -+ return; -+ } -+ -+ if (ep0_urb->device_request.wLength == 0) { -+ if (ep0_recv_setup(ep0_urb)) { -+ /* Not a setup packet, stall next EP0 transaction */ -+ debug("can't parse setup packet1\n"); -+ set_ep0_ss(); -+ set_ep0_de_out(); -+ ep0->state = EP0_IDLE; -+ return; -+ } -+ /* There are some requests with which we need to deal -+ * manually here */ -+ switch (ep0_urb->device_request.bRequest) { -+ case USB_REQ_SET_CONFIGURATION: -+ if (!ep0_urb->device_request.wValue) -+ usbd_device_event_irq(udc_device, -+ DEVICE_DE_CONFIGURED, 0); -+ else -+ usbd_device_event_irq(udc_device, -+ DEVICE_CONFIGURED, 0); -+ break; -+ case USB_REQ_SET_ADDRESS: -+ udc_set_address(udc_device->address); -+ usbd_device_event_irq(udc_device, -+ DEVICE_ADDRESS_ASSIGNED, 0); -+ break; -+ default: -+ break; -+ } -+ set_ep0_de_out(); -+ ep0->state = EP0_IDLE; -+ } else { -+ if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) -+ == USB_REQ_HOST2DEVICE) { -+ clear_ep0_opr(); -+ ep0->state = EP0_OUT_DATA_PHASE; -+ ep0_urb->buffer = ep0_urb->buffer_data; -+ ep0_urb->buffer_length = sizeof(ep0_urb->buffer_data); -+ ep0_urb->actual_length = 0; -+ } else { -+ ep0->state = EP0_IN_DATA_PHASE; -+ -+ if (ep0_recv_setup(ep0_urb)) { -+ /* Not a setup packet, stall next EP0 transaction */ -+ debug("can't parse setup packet2\n"); -+ set_ep0_ss(); -+ //set_ep0_de_out(); -+ ep0->state = EP0_IDLE; -+ return; -+ } -+ clear_ep0_opr(); -+ ep0->tx_urb = ep0_urb; -+ ep0->sent = ep0->last = 0; -+ -+ if (s3c2410_write_noniso_tx_fifo(ep0)) { -+ ep0->state = EP0_IDLE; -+ set_ep0_de_in(); -+ } else -+ set_ep0_ipr(); -+ } -+ } -+ break; -+ case EP0_IN_DATA_PHASE: -+ if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY)) { -+ ep0->sent += ep0->last; -+ -+ if (s3c2410_write_noniso_tx_fifo(ep0)) { -+ ep0->state = EP0_IDLE; -+ set_ep0_de_in(); -+ } else -+ set_ep0_ipr(); -+ } -+ break; -+ case EP0_OUT_DATA_PHASE: -+ if (ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) { -+ u32 urb_avail = ep0_urb->buffer_length - ep0_urb->actual_length; -+ u_int8_t *cp = ep0_urb->buffer + ep0_urb->actual_length; -+ int i, fifo_count; -+ -+ fifo_count = fifo_count_out(); -+ if (fifo_count < urb_avail) -+ urb_avail = fifo_count; -+ -+ for (i = 0; i < urb_avail; i++) -+ *cp++ = inl(S3C2410_UDC_EP0_FIFO_REG); -+ -+ ep0_urb->actual_length += urb_avail; -+ -+ if (fifo_count < ep0->rcv_packetSize || -+ ep0_urb->actual_length >= ep0_urb->device_request.wLength) { -+ ep0->state = EP0_IDLE; -+ if (ep0_recv_setup(ep0_urb)) { -+ /* Not a setup packet, stall next EP0 transaction */ -+ debug("can't parse setup packet3\n"); -+ set_ep0_ss(); -+ //set_ep0_de_out(); -+ return; -+ } -+ set_ep0_de_out(); -+ } else -+ clear_ep0_opr(); -+ } -+ break; -+ case EP0_END_XFER: -+ ep0->state = EP0_IDLE; -+ break; -+ case EP0_STALL: -+ //set_ep0_ss; -+ ep0->state = EP0_IDLE; -+ break; -+ } -+} -+ -+ -+static void s3c2410_udc_epn(int ep) -+{ -+ struct usb_endpoint_instance *endpoint; -+ struct urb *urb; -+ u32 ep_csr1; -+ -+ if (ep >= S3C2410_UDC_NUM_ENDPOINTS) -+ return; -+ -+ endpoint = &udc_device->bus->endpoint_array[ep]; -+ -+ S3C2410_UDC_SETIX(ep); -+ -+ if (endpoint->endpoint_address & USB_DIR_IN) { -+ /* IN transfer (device to host) */ -+ ep_csr1 = inl(S3C2410_UDC_IN_CSR1_REG); -+ debug("for ep=%u, CSR1=0x%x ", ep, ep_csr1); -+ -+ urb = endpoint->tx_urb; -+ if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) { -+ /* Stall handshake */ -+ debug("stall\n"); -+ outl(0x00, S3C2410_UDC_IN_CSR1_REG); -+ return; -+ } -+ if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && urb && -+ urb->actual_length) { -+ -+ debug("completing previously send data "); -+ usbd_tx_complete(endpoint); -+ -+ /* push pending data into FIFO */ -+ if ((endpoint->last == endpoint->tx_packetSize) && -+ (urb->actual_length - endpoint->sent - endpoint->last == 0)) { -+ endpoint->sent += endpoint->last; -+ /* Write 0 bytes of data (ZLP) */ -+ debug("ZLP "); -+ outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG); -+ } else { -+ /* write actual data to fifo */ -+ debug("TX_DATA "); -+ s3c2410_write_noniso_tx_fifo(endpoint); -+ outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG); -+ } -+ } -+ debug("\n"); -+ } else { -+ /* OUT transfer (host to device) */ -+ ep_csr1 = inl(S3C2410_UDC_OUT_CSR1_REG); -+ debug("for ep=%u, CSR1=0x%x ", ep, ep_csr1); -+ -+ urb = endpoint->rcv_urb; -+ if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) { -+ /* Stall handshake */ -+ outl(0x00, S3C2410_UDC_IN_CSR1_REG); -+ return; -+ } -+ if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && urb) { -+ /* Read pending data from fifo */ -+ u32 fifo_count = fifo_count_out(); -+ int is_last = 0; -+ u32 i, urb_avail = urb->buffer_length - urb->actual_length; -+ u8 *cp = urb->buffer + urb->actual_length; -+ -+ if (fifo_count < endpoint->rcv_packetSize) -+ is_last = 1; -+ -+ debug("fifo_count=%u is_last=%, urb_avail=%u)\n", -+ fifo_count, is_last, urb_avail); -+ -+ if (fifo_count < urb_avail) -+ urb_avail = fifo_count; -+ -+ for (i = 0; i < urb_avail; i++) -+ *cp++ = inb(ep_fifo_reg[ep]); -+ -+ if (is_last) -+ outl(ep_csr1 & ~S3C2410_UDC_OCSR1_PKTRDY, -+ S3C2410_UDC_OUT_CSR1_REG); -+ -+ usbd_rcv_complete(endpoint, urb_avail, 0); -+ } -+ } -+ -+ urb = endpoint->rcv_urb; -+} -+ -+/* -+------------------------------------------------------------------------------- -+*/ -+ -+/* this is just an empty wrapper for usbtty who assumes polling operation */ -+void udc_irq(void) -+{ -+} -+ -+/* Handle general USB interrupts and dispatch according to type. -+ * This function implements TRM Figure 14-13. -+ */ -+void s3c2410_udc_irq(void) -+{ -+ struct usb_endpoint_instance *ep0 = udc_device->bus->endpoint_array; -+ u_int32_t save_idx = inl(S3C2410_UDC_INDEX_REG); -+ -+ /* read interrupt sources */ -+ u_int32_t usb_status = inl(S3C2410_UDC_USB_INT_REG); -+ u_int32_t usbd_status = inl(S3C2410_UDC_EP_INT_REG); -+ -+ //debug("< IRQ usbs=0x%02x, usbds=0x%02x start >", usb_status, usbd_status); -+ -+ /* clear interrupts */ -+ outl(usb_status, S3C2410_UDC_USB_INT_REG); -+ -+ if (usb_status & S3C2410_UDC_USBINT_RESET) { -+ //serial_putc('R'); -+ debug("RESET pwr=0x%x\n", inl(S3C2410_UDC_PWR_REG)); -+ udc_setup_ep(udc_device, 0, ep0); -+ outl(S3C2410_UDC_EP0_CSR_SSE|S3C2410_UDC_EP0_CSR_SOPKTRDY, S3C2410_UDC_EP0_CSR_REG); -+ ep0->state = EP0_IDLE; -+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0); -+ } -+ -+ if (usb_status & S3C2410_UDC_USBINT_RESUME) { -+ debug("RESUME\n"); -+ usbd_device_event_irq(udc_device, DEVICE_BUS_ACTIVITY, 0); -+ } -+ -+ if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { -+ debug("SUSPEND\n"); -+ usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0); -+ } -+ -+ /* Endpoint Interrupts */ -+ if (usbd_status) { -+ int i; -+ -+ if (usbd_status & S3C2410_UDC_INT_EP0) { -+ outl(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); -+ s3c2410_udc_ep0(); -+ } -+ -+ for (i = 1; i < 5; i++) { -+ u_int32_t tmp = 1 << i; -+ -+ if (usbd_status & tmp) { -+ /* FIXME: Handle EP X */ -+ outl(tmp, S3C2410_UDC_EP_INT_REG); -+ s3c2410_udc_epn(i); -+ } -+ } -+ } -+ S3C2410_UDC_SETIX(save_idx); -+} -+ -+/* -+------------------------------------------------------------------------------- -+*/ -+ -+ -+/* -+ * Start of public functions. -+ */ -+ -+/* Called to start packet transmission. */ -+void udc_endpoint_write (struct usb_endpoint_instance *endpoint) -+{ -+ unsigned short epnum = -+ endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; -+ -+ debug("Entering for ep %x ", epnum); -+ -+ if (endpoint->tx_urb) { -+ u32 ep_csr1; -+ debug("We have an URB, transmitting\n"); -+ -+ s3c2410_write_noniso_tx_fifo(endpoint); -+ -+ S3C2410_UDC_SETIX(epnum); -+ -+ ep_csr1 = inl(S3C2410_UDC_IN_CSR1_REG); -+ outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG); -+ } else -+ debug("\n"); -+} -+ -+/* Start to initialize h/w stuff */ -+int udc_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); -+ -+ udc_device = NULL; -+ -+ /* Set and check clock control. -+ * We might ought to be using the clock control API to do -+ * this instead of fiddling with the clock registers directly -+ * here. -+ */ -+ clk_power->CLKCON |= (1 << 7); -+ -+ /* Print banner with device revision */ -+ printf("USB: S3C2410 USB Deviced\n"); -+ -+ /* -+ * At this point, device is ready for configuration... -+ */ -+ outl(0x00, S3C2410_UDC_EP_INT_EN_REG); -+ outl(0x00, S3C2410_UDC_USB_INT_EN_REG); -+ -+ irq->INTMSK &= ~BIT_USBD; -+ -+ return 0; -+} -+ -+/* -+ * udc_setup_ep - setup endpoint -+ * -+ * Associate a physical endpoint with endpoint_instance -+ */ -+int udc_setup_ep (struct usb_device_instance *device, -+ unsigned int ep, struct usb_endpoint_instance *endpoint) -+{ -+ int ep_addr = endpoint->endpoint_address; -+ int packet_size; -+ int attributes; -+ u_int32_t maxp; -+ -+ S3C2410_UDC_SETIX(ep); -+ -+ if (ep) { -+ if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { -+ /* IN endpoint */ -+ outl(S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT, -+ S3C2410_UDC_IN_CSR1_REG); -+ outl(S3C2410_UDC_ICSR2_MODEIN, S3C2410_UDC_IN_CSR2_REG); -+ packet_size = endpoint->tx_packetSize; -+ attributes = endpoint->tx_attributes; -+ } else { -+ /* OUT endpoint */ -+ outl(S3C2410_UDC_ICSR1_CLRDT, S3C2410_UDC_IN_CSR1_REG); -+ outl(0, S3C2410_UDC_IN_CSR2_REG); -+ outl(S3C2410_UDC_OCSR1_FFLUSH|S3C2410_UDC_OCSR1_CLRDT, -+ S3C2410_UDC_OUT_CSR1_REG); -+ outl(0, S3C2410_UDC_OUT_CSR2_REG); -+ packet_size = endpoint->rcv_packetSize; -+ attributes = endpoint->rcv_attributes; -+ } -+ } else -+ packet_size = endpoint->tx_packetSize; -+ -+ switch (packet_size) { -+ case 8: -+ maxp = S3C2410_UDC_MAXP_8; -+ break; -+ case 16: -+ maxp = S3C2410_UDC_MAXP_16; -+ break; -+ case 32: -+ maxp = S3C2410_UDC_MAXP_32; -+ break; -+ case 64: -+ maxp = S3C2410_UDC_MAXP_64; -+ break; -+ default: -+ debug("invalid packet size %u\n", packet_size); -+ return -1; -+ } -+ -+ debug("setting up endpoint %u addr %x packet_size %u maxp %u\n", ep, -+ endpoint->endpoint_address, packet_size, maxp); -+ -+ /* Set maximum packet size */ -+ writel(maxp, S3C2410_UDC_MAXP_REG); -+ -+ return 0; -+} -+ -+/* ************************************************************************** */ -+ -+/** -+ * udc_connected - is the USB cable connected -+ * -+ * Return non-zero if cable is connected. -+ */ -+#if 0 -+int udc_connected (void) -+{ -+ return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT); -+} -+#endif -+ -+/* Turn on the USB connection by enabling the pullup resistor */ -+void udc_connect (void) -+{ -+ debug("connect, enable Pullup\n"); -+ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); -+ -+ udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 0); -+ udelay(10000); -+ udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 1); -+ -+ irq->INTMSK &= ~BIT_USBD; -+} -+ -+/* Turn off the USB connection by disabling the pullup resistor */ -+void udc_disconnect (void) -+{ -+ debug("disconnect, disable Pullup\n"); -+ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); -+ -+ udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 0); -+ -+ /* Disable interrupt (we don't want to get interrupts while the kernel -+ * is relocating itself */ -+ irq->INTMSK |= BIT_USBD; -+} -+ -+/* Switch on the UDC */ -+void udc_enable (struct usb_device_instance *device) -+{ -+ debug("enable device %p, status %d\n", device, device->status); -+ -+ /* Save the device structure pointer */ -+ udc_device = device; -+ -+ /* Setup ep0 urb */ -+ if (!ep0_urb) -+ ep0_urb = usbd_alloc_urb(udc_device, -+ udc_device->bus->endpoint_array); -+ else -+ serial_printf("udc_enable: ep0_urb already allocated %p\n", -+ ep0_urb); -+ -+ s3c2410_configure_device(device); -+} -+ -+/* Switch off the UDC */ -+void udc_disable (void) -+{ -+ debug("disable UDC\n"); -+ -+ s3c2410_deconfigure_device(); -+ -+ /* Free ep0 URB */ -+ if (ep0_urb) { -+ /*usbd_dealloc_urb(ep0_urb); */ -+ ep0_urb = NULL; -+ } -+ -+ /* Reset device pointer. -+ * We ought to do this here to balance the initialization of udc_device -+ * in udc_enable, but some of our other exported functions get called -+ * by the bus interface driver after udc_disable, so we have to hang on -+ * to the device pointer to avoid a null pointer dereference. */ -+ /* udc_device = NULL; */ -+} -+ -+/** -+ * udc_startup - allow udc code to do any additional startup -+ */ -+void udc_startup_events (struct usb_device_instance *device) -+{ -+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ -+ usbd_device_event_irq (device, DEVICE_INIT, 0); -+ -+ /* The DEVICE_CREATE event puts the USB device in the state -+ * STATE_ATTACHED. -+ */ -+ usbd_device_event_irq (device, DEVICE_CREATE, 0); -+ -+ /* Some USB controller driver implementations signal -+ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. -+ * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, -+ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. -+ * The OMAP USB client controller has the capability to detect when the -+ * USB cable is connected to a powered USB bus via the ATT bit in the -+ * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and -+ * DEVICE_RESET events until later. -+ */ -+ -+ /* The GTA01 can detect usb device attachment, but we just assume being -+ * attached for now (go to STATE_POWERED) */ -+ usbd_device_event_irq (device, DEVICE_HUB_CONFIGURED, 0); -+ -+ udc_enable (device); -+} -+ -+void udc_set_nak(int epid) -+{ -+ /* FIXME: implement this */ -+} -+ -+void udc_unset_nak(int epid) -+{ -+ /* FIXME: implement this */ -+} -+ -+#endif /* CONFIG_S3C2410 && CONFIG_USB_DEVICE */ -Index: u-boot/drivers/usbdcore_s3c2410.h -=================================================================== ---- /dev/null -+++ u-boot/drivers/usbdcore_s3c2410.h -@@ -0,0 +1,273 @@ -+/* linux/include/asm/arch-s3c2410/regs-udc.h -+ * -+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> -+ * -+ * This include file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * Changelog: -+ * 01-08-2004 Initial creation -+ * 12-09-2004 Cleanup for submission -+ * 24-10-2004 Fixed S3C2410_UDC_MAXP_REG definition -+ * 10-03-2005 Changed S3C2410_VA to S3C24XX_VA -+ * 10-01-2007 Modify for u-boot -+ */ -+ -+#ifndef __ASM_ARCH_REGS_UDC_H -+#define __ASM_ARCH_REGS_UDC_H -+ -+#define S3C2410_UDC_REG_BASE_PHYS 0x52000000 -+#define S3C2410_UDC_NUM_ENDPOINTS 5 -+ -+#define S3C2410_USBDREG(x) (x + S3C2410_UDC_REG_BASE_PHYS) -+ -+#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) -+#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) -+#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148) -+ -+#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158) -+#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c) -+ -+#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c) -+ -+#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170) -+#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174) -+ -+#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0) -+#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4) -+#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8) -+#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc) -+#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0) -+ -+#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200) -+#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204) -+#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208) -+#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c) -+#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210) -+#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214) -+ -+#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218) -+#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c) -+#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220) -+#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224) -+#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228) -+#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c) -+ -+#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240) -+#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244) -+#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248) -+#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c) -+#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250) -+#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254) -+ -+#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258) -+#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c) -+#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260) -+#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264) -+#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268) -+#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c) -+ -+#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178) -+ -+/* indexed registers */ -+ -+#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180) -+ -+#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184) -+ -+#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184) -+#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188) -+ -+#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190) -+#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194) -+#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) -+#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) -+ -+ -+ -+#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W -+#define S3C2410_UDC_PWR_RESET (1<<3) // R -+#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W -+#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R -+#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W -+ -+#define S3C2410_UDC_PWR_DEFAULT 0x00 -+ -+#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only) -+#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only) -+#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only) -+#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only) -+#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only) -+ -+#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only) -+#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only) -+#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only) -+ -+#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W -+#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W -+#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W -+#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W -+#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W -+ -+#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W -+#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W -+ -+ -+#define S3C2410_UDC_INDEX_EP0 (0x00) -+#define S3C2410_UDC_INDEX_EP1 (0x01) // ?? -+#define S3C2410_UDC_INDEX_EP2 (0x02) // ?? -+#define S3C2410_UDC_INDEX_EP3 (0x03) // ?? -+#define S3C2410_UDC_INDEX_EP4 (0x04) // ?? -+ -+#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W -+#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only) -+#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W -+#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only) -+#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only) -+#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only) -+ -+#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W -+#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W -+#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W -+#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W -+ -+#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W -+#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only) -+#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W -+#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W -+#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R -+#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only) -+#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only) -+ -+#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W -+#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W -+#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W -+ -+#define S3C2410_UDC_SETIX(X) writel(X, S3C2410_UDC_INDEX_REG) -+ -+#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) -+#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1) -+#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2) -+#define S3C2410_UDC_EP0_CSR_DE (1<<3) -+#define S3C2410_UDC_EP0_CSR_SE (1<<4) -+#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5) -+#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6) -+#define S3C2410_UDC_EP0_CSR_SSE (1<<7) -+ -+#define S3C2410_UDC_MAXP_8 (1<<0) -+#define S3C2410_UDC_MAXP_16 (1<<1) -+#define S3C2410_UDC_MAXP_32 (1<<2) -+#define S3C2410_UDC_MAXP_64 (1<<3) -+ -+/****************** MACROS ******************/ -+#define BIT_MASK 0xFF -+ -+#if 1 -+#define maskl(v,m,a) \ -+ writel((readl(a) & ~(m))|((v)&(m)), (a)) -+#else -+#define maskl(v,m,a) do { \ -+ unsigned long foo = readl(a); \ -+ unsigned long bar = (foo & ~(m)) | ((v)&(m)); \ -+ serial_printf("0x%08x:0x%x->0x%x\n", (a), foo, bar); \ -+ writel(bar, (a)); \ -+} while(0) -+#endif -+ -+#define clear_ep0_sst() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ writel(0x00, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+#define clear_ep0_se() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ maskl(S3C2410_UDC_EP0_CSR_SSE, \ -+ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+#define clear_ep0_opr() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ maskl(S3C2410_UDC_EP0_CSR_SOPKTRDY, \ -+ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+#define set_ep0_ipr() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ maskl(S3C2410_UDC_EP0_CSR_IPKRDY, \ -+ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+#define set_ep0_de() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ maskl(S3C2410_UDC_EP0_CSR_DE, \ -+ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+#define set_ep0_ss() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ maskl(S3C2410_UDC_EP0_CSR_SENDSTL, \ -+ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+#define set_ep0_de_out() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ maskl((S3C2410_UDC_EP0_CSR_SOPKTRDY \ -+ | S3C2410_UDC_EP0_CSR_DE), \ -+ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+#define set_ep0_sse_out() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ maskl((S3C2410_UDC_EP0_CSR_SOPKTRDY \ -+ | S3C2410_UDC_EP0_CSR_SSE), \ -+ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+#define set_ep0_de_in() do { \ -+ S3C2410_UDC_SETIX(0); \ -+ maskl((S3C2410_UDC_EP0_CSR_IPKRDY \ -+ | S3C2410_UDC_EP0_CSR_DE), \ -+ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ -+} while(0) -+ -+ -+#if 0 -+ -+#define clear_stall_ep1_out(base) do { \ -+ S3C2410_UDC_SETIX(base,EP1); \ -+ orl(0,base+S3C2410_UDC_OUT_CSR1_REG); \ -+} while(0) -+ -+ -+#define clear_stall_ep2_out(base) do { \ -+ S3C2410_UDC_SETIX(base,EP2); \ -+ orl(0, base+S3C2410_UDC_OUT_CSR1_REG); \ -+} while(0) -+ -+ -+#define clear_stall_ep3_out(base) do { \ -+ S3C2410_UDC_SETIX(base,EP3); \ -+ orl(0,base+S3C2410_UDC_OUT_CSR1_REG); \ -+} while(0) -+ -+ -+#define clear_stall_ep4_out(base) do { \ -+ S3C2410_UDC_SETIX(base,EP4); \ -+ orl(0, base+S3C2410_UDC_OUT_CSR1_REG); \ -+} while(0) -+ -+#endif -+ -+/* S3C2410 Endpoint parameters */ -+#define EP0_MAX_PACKET_SIZE 16 -+#define UDC_OUT_ENDPOINT 2 -+#define UDC_OUT_PACKET_SIZE 64 -+#define UDC_IN_ENDPOINT 1 -+#define UDC_IN_PACKET_SIZE 64 -+#define UDC_INT_ENDPOINT 5 -+#define UDC_INT_PACKET_SIZE 16 -+#define UDC_BULK_PACKET_SIZE 16 -+ -+#endif -Index: u-boot/drivers/usbdcore_ep0.c -=================================================================== ---- u-boot.orig/drivers/usbdcore_ep0.c -+++ u-boot/drivers/usbdcore_ep0.c -@@ -43,7 +43,7 @@ - - #include <common.h> - --#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE) -+#if defined(CONFIG_USB_DEVICE) - #include "usbdcore.h" - - #if 0 -@@ -187,9 +187,13 @@ - if (!urb || !urb->buffer || !urb->buffer_length - || (urb->buffer_length < 255)) { - dbg_ep0 (2, "invalid urb %p", urb); -+ serial_printf("invalid urb %p", urb); - return -1L; - } - -+ /* re-initialize the ep0 buffer pointer */ -+ urb->buffer = (u8 *) urb->buffer_data; -+ - /* setup tx urb */ - urb->actual_length = 0; - cp = urb->buffer; -@@ -206,17 +210,8 @@ - usbd_device_device_descriptor (device, port))) { - return -1; - } -- /* copy descriptor for this device */ -- copy_config (urb, device_descriptor, -- sizeof (struct usb_device_descriptor), -- max); -- -- /* correct the correct control endpoint 0 max packet size into the descriptor */ -- device_descriptor = -- (struct usb_device_descriptor *) urb->buffer; -- device_descriptor->bMaxPacketSize0 = -- urb->device->bus->maxpacketsize; -- -+ urb->buffer = device_descriptor; -+ urb->actual_length = MIN(sizeof(*device_descriptor), max); - } - /*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */ - break; -@@ -250,11 +245,9 @@ - index); - return -1; - } -- copy_config (urb, configuration_descriptor, -- sizeof (struct -- usb_configuration_descriptor), -- max); -- -+ urb->buffer = configuration_descriptor; -+ urb->actual_length = -+ MIN(le16_to_cpu(configuration_descriptor->wTotalLength), max); - } - break; - -@@ -376,6 +369,7 @@ - dbg_ep0 (0, "entering ep0_recv_setup()"); - if (!urb || !urb->device) { - dbg_ep0 (3, "invalid URB %p", urb); -+ serial_printf("invalid URB %p", urb); - return -1; - } - -@@ -400,6 +394,7 @@ - return device->cdc_recv_setup(request, urb); - dbg_ep0 (1, "non standard request: %x", - request->bmRequestType & USB_REQ_TYPE_MASK); -+ serial_printf("non standard request: %x", request->bmRequestType & USB_REQ_TYPE_MASK); - return -1; /* Stall here */ - } - -@@ -448,6 +443,8 @@ - dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s", - USBD_DEVICE_REQUESTS (request->bRequest), - usbd_device_states[device->device_state]); -+ serial_printf("request %s not allowed in UNKNOWN state: %s", USBD_DEVICE_REQUESTS (request->bRequest), usbd_device_states[device->device_state]); -+ break; - return -1; - } - -@@ -545,7 +542,8 @@ - /*dbg_ep0(2, "address: %d %d %d", */ - /* request->wValue, le16_to_cpu(request->wValue), device->address); */ - -- serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n"); -+ //serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n"); -+ //udc_set_address(device->address); - return 0; - - case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */ -Index: u-boot/include/configs/neo1973_gta01.h -=================================================================== ---- u-boot.orig/include/configs/neo1973_gta01.h -+++ u-boot/include/configs/neo1973_gta01.h -@@ -173,6 +173,16 @@ - #define CONFIG_USB_OHCI 1 - #endif - -+#define CONFIG_USB_DEVICE 1 -+#define CONFIG_USB_TTY 1 -+#define CFG_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ -+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ -+#define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ -+#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" -+#define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION -+#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" -+ - /*----------------------------------------------------------------------- - * Physical Memory Map - */ -Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c -+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c -@@ -222,6 +222,13 @@ - S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); - u_int32_t intpnd = irq->INTPND; - -+#ifdef CONFIG_USB_DEVICE -+ if (intpnd & BIT_USBD) { -+ s3c2410_udc_irq(); -+ irq->SRCPND = BIT_USBD; -+ irq->INTPND = BIT_USBD; -+ } -+#endif /* USB_DEVICE */ - } - #endif /* USE_IRQ */ - -Index: u-boot/drivers/usbtty.h -=================================================================== ---- u-boot.orig/drivers/usbtty.h -+++ u-boot/drivers/usbtty.h -@@ -29,6 +29,8 @@ - #include "usbdcore_mpc8xx.h" - #elif defined(CONFIG_OMAP1510) - #include "usbdcore_omap1510.h" -+#elif defined(CONFIG_S3C2410) -+#include "usbdcore_s3c2410.h" - #endif - - #include <config.h> -Index: u-boot/board/neo1973/common/cmd_neo1973.c -=================================================================== ---- u-boot.orig/board/neo1973/common/cmd_neo1973.c -+++ u-boot/board/neo1973/common/cmd_neo1973.c -@@ -72,6 +72,18 @@ - neo1973_vibrator(1); - else - neo1973_vibrator(0); -+ } else if (!strcmp(argv[1], "udc")) { -+ if (argc < 3) -+ goto out_help; -+ if (!strcmp(argv[2], "udc")) { -+ if (argc < 4) -+ goto out_help; -+ if (!strcmp(argv[3], "on")) -+ udc_connect(); -+ else -+ udc_disconnect(); -+ } else -+ goto out_help; - } else { - out_help: - printf("Usage:\n%s\n", cmdtp->usage); -@@ -95,5 +107,6 @@ - "neo1973 charger off - disable charging\n" - "neo1973 backlight (on|off) - switch backlight on or off\n" - "neo1973 vibrator (on|off) - switch vibrator on or off\n" -+ "neo1973 udc pullup (on|off) - switch pull-up on or off\n" - ); - #endif /* CFG_CMD_BDI */ -Index: u-boot/board/neo1973/gta01/Makefile -=================================================================== ---- u-boot.orig/board/neo1973/gta01/Makefile -+++ u-boot/board/neo1973/gta01/Makefile -@@ -25,7 +25,7 @@ - - LIB = lib$(BOARD).a - --OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o -+OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o - SOBJS := ../common/lowlevel_init.o - - $(LIB): $(OBJS) $(SOBJS) -Index: u-boot/board/neo1973/common/udc.c -=================================================================== ---- /dev/null -+++ u-boot/board/neo1973/common/udc.c -@@ -0,0 +1,23 @@ -+ -+#include <common.h> -+#include <usbdcore.h> -+#include <s3c2410.h> -+ -+void udc_ctrl(enum usbd_event event, int param) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ switch (event) { -+ case UDC_CTRL_PULLUP_ENABLE: -+#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \ -+ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4) -+ if (param) -+ gpio->GPBDAT |= (1 << 9); -+ else -+ gpio->GPBDAT &= ~(1 << 9); -+#endif -+ break; -+ default: -+ break; -+ } -+} -Index: u-boot/include/usbdcore.h -=================================================================== ---- u-boot.orig/include/usbdcore.h -+++ u-boot/include/usbdcore.h -@@ -671,4 +671,10 @@ - void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad); - void usbd_tx_complete (struct usb_endpoint_instance *endpoint); - -+enum usbd_event { -+ UDC_CTRL_PULLUP_ENABLE, -+}; -+ -+void udc_ctrl(enum usbd_event event, int param); -+#endif - #endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2440.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2440.patch deleted file mode 100644 index da0fb8cf2d..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2440.patch +++ /dev/null @@ -1,1301 +0,0 @@ -Add proper support for S3C2440 CPU's - -Index: u-boot/include/s3c24x0.h -=================================================================== ---- u-boot.orig/include/s3c24x0.h -+++ u-boot/include/s3c24x0.h -@@ -82,7 +82,7 @@ - S3C24X0_REG32 PRIORITY; - S3C24X0_REG32 INTPND; - S3C24X0_REG32 INTOFFSET; --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - S3C24X0_REG32 SUBSRCPND; - S3C24X0_REG32 INTSUBMSK; - #endif -@@ -92,11 +92,11 @@ - /* DMAS (see manual chapter 8) */ - typedef struct { - S3C24X0_REG32 DISRC; --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - S3C24X0_REG32 DISRCC; - #endif - S3C24X0_REG32 DIDST; --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - S3C24X0_REG32 DIDSTC; - #endif - S3C24X0_REG32 DCON; -@@ -107,7 +107,7 @@ - #ifdef CONFIG_S3C2400 - S3C24X0_REG32 res[1]; - #endif --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - S3C24X0_REG32 res[7]; - #endif - } /*__attribute__((__packed__))*/ S3C24X0_DMA; -@@ -126,6 +126,9 @@ - S3C24X0_REG32 CLKCON; - S3C24X0_REG32 CLKSLOW; - S3C24X0_REG32 CLKDIVN; -+#ifdef CONFIG_S3C2440 -+ S3C24X0_REG32 CAMDIVN; -+#endif - } /*__attribute__((__packed__))*/ S3C24X0_CLOCK_POWER; - - -@@ -145,7 +148,7 @@ - S3C24X0_REG32 res[8]; - S3C24X0_REG32 DITHMODE; - S3C24X0_REG32 TPAL; --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - S3C24X0_REG32 LCDINTPND; - S3C24X0_REG32 LCDSRCPND; - S3C24X0_REG32 LCDINTMSK; -@@ -157,6 +160,9 @@ - /* NAND FLASH (see S3C2410 manual chapter 6) */ - typedef struct { - S3C24X0_REG32 NFCONF; -+#ifdef CONFIG_S3C2440 -+ S3C24X0_REG32 NFCONT; -+#endif - S3C24X0_REG32 NFCMD; - S3C24X0_REG32 NFADDR; - S3C24X0_REG32 NFDATA; -@@ -164,6 +170,15 @@ - S3C24X0_REG32 NFECC; - } /*__attribute__((__packed__))*/ S3C2410_NAND; - -+/* NAND FLASH (see S3C2440 manual chapter 6) */ -+typedef struct { -+ S3C24X0_REG32 NFCONF; -+ S3C24X0_REG32 NFCMD; -+ S3C24X0_REG32 NFADDR; -+ S3C24X0_REG32 NFDATA; -+ S3C24X0_REG32 NFSTAT; -+ S3C24X0_REG32 NFECC; -+} /*__attribute__((__packed__))*/ S3C2440_NAND; - - /* UART (see manual chapter 11) */ - typedef struct { -@@ -451,6 +466,65 @@ - S3C24X0_REG32 GSTATUS3; - S3C24X0_REG32 GSTATUS4; - #endif -+#ifdef CONFIG_S3C2440 -+ S3C24X0_REG32 GPACON; -+ S3C24X0_REG32 GPADAT; -+ S3C24X0_REG32 res1[2]; -+ S3C24X0_REG32 GPBCON; -+ S3C24X0_REG32 GPBDAT; -+ S3C24X0_REG32 GPBUP; -+ S3C24X0_REG32 res2; -+ S3C24X0_REG32 GPCCON; -+ S3C24X0_REG32 GPCDAT; -+ S3C24X0_REG32 GPCUP; -+ S3C24X0_REG32 res3; -+ S3C24X0_REG32 GPDCON; -+ S3C24X0_REG32 GPDDAT; -+ S3C24X0_REG32 GPDUP; -+ S3C24X0_REG32 res4; -+ S3C24X0_REG32 GPECON; -+ S3C24X0_REG32 GPEDAT; -+ S3C24X0_REG32 GPEUP; -+ S3C24X0_REG32 res5; -+ S3C24X0_REG32 GPFCON; -+ S3C24X0_REG32 GPFDAT; -+ S3C24X0_REG32 GPFUP; -+ S3C24X0_REG32 res6; -+ S3C24X0_REG32 GPGCON; -+ S3C24X0_REG32 GPGDAT; -+ S3C24X0_REG32 GPGUP; -+ S3C24X0_REG32 res7; -+ S3C24X0_REG32 GPHCON; -+ S3C24X0_REG32 GPHDAT; -+ S3C24X0_REG32 GPHUP; -+ S3C24X0_REG32 res8; -+ -+ S3C24X0_REG32 MISCCR; -+ S3C24X0_REG32 DCLKCON; -+ S3C24X0_REG32 EXTINT0; -+ S3C24X0_REG32 EXTINT1; -+ S3C24X0_REG32 EXTINT2; -+ S3C24X0_REG32 EINTFLT0; -+ S3C24X0_REG32 EINTFLT1; -+ S3C24X0_REG32 EINTFLT2; -+ S3C24X0_REG32 EINTFLT3; -+ S3C24X0_REG32 EINTMASK; -+ S3C24X0_REG32 EINTPEND; -+ S3C24X0_REG32 GSTATUS0; -+ S3C24X0_REG32 GSTATUS1; -+ S3C24X0_REG32 GSTATUS2; -+ S3C24X0_REG32 GSTATUS3; -+ S3C24X0_REG32 GSTATUS4; -+ -+ S3C24X0_REG32 res9; -+ S3C24X0_REG32 DSC0; -+ S3C24X0_REG32 DSC1; -+ S3C24X0_REG32 MSLCON; -+ S3C24X0_REG32 GPJCON; -+ S3C24X0_REG32 GPJDAT; -+ S3C24X0_REG32 GPJUP; -+ S3C24X0_REG32 res10; -+#endif - } /*__attribute__((__packed__))*/ S3C24X0_GPIO; - - -@@ -637,8 +711,13 @@ - S3C24X0_REG32 SDIDCNT; - S3C24X0_REG32 SDIDSTA; - S3C24X0_REG32 SDIFSTA; -+#if defined(CONFIG_S3C2410) - S3C24X0_REG32 SDIDAT; - S3C24X0_REG32 SDIIMSK; -+#elif defined(CONFIG_S3C2440) -+ S3C24X0_REG32 SDIIMSK; -+ S3C24X0_REG32 SDIDAT; -+#endif - } /*__attribute__((__packed__))*/ S3C2410_SDI; - - -Index: u-boot/rtc/s3c24x0_rtc.c -=================================================================== ---- u-boot.orig/rtc/s3c24x0_rtc.c -+++ u-boot/rtc/s3c24x0_rtc.c -@@ -34,6 +34,8 @@ - #include <s3c2400.h> - #elif defined(CONFIG_S3C2410) - #include <s3c2410.h> -+#elif defined(CONFIG_S3C2440) -+#include <s3c2440.h> - #endif - - #include <rtc.h> -Index: u-boot/include/s3c2440.h -=================================================================== ---- /dev/null -+++ u-boot/include/s3c2440.h -@@ -0,0 +1,300 @@ -+/* -+ * (C) Copyright 2003 -+ * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/************************************************ -+ * NAME : s3c2440.h -+ * Version : 2007. -+ * -+ * Based on S3C2410X User's manual Rev 1.1 -+ ************************************************/ -+ -+#ifndef __S3C2440_H__ -+#define __S3C2440_H__ -+ -+#define S3C24X0_UART_CHANNELS 3 -+#define S3C24X0_SPI_CHANNELS 2 -+ -+/* S3C2440 only supports 512 Byte HW ECC */ -+#define S3C2440_ECCSIZE 512 -+#define S3C2440_ECCBYTES 3 -+ -+/* S3C2440 device base addresses */ -+#define S3C24X0_MEMCTL_BASE 0x48000000 -+#define S3C24X0_USB_HOST_BASE 0x49000000 -+#define S3C24X0_INTERRUPT_BASE 0x4A000000 -+#define S3C24X0_DMA_BASE 0x4B000000 -+#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 -+#define S3C24X0_LCD_BASE 0x4D000000 -+#define S3C2440_NAND_BASE 0x4E000000 -+#define S3C24X0_UART_BASE 0x50000000 -+#define S3C24X0_TIMER_BASE 0x51000000 -+#define S3C24X0_USB_DEVICE_BASE 0x52000140 -+#define USB_DEVICE_PHYS_ADR 0x52000000 -+#define S3C24X0_WATCHDOG_BASE 0x53000000 -+#define S3C24X0_I2C_BASE 0x54000000 -+#define S3C24X0_I2S_BASE 0x55000000 -+#define S3C24X0_GPIO_BASE 0x56000000 -+#define S3C24X0_RTC_BASE 0x57000000 -+#define S3C2440_ADC_BASE 0x58000000 -+#define S3C24X0_SPI_BASE 0x59000000 -+#define S3C2440_SDI_BASE 0x5A000000 -+ -+#define oNFCONF 0x00 -+#define oNFCONT 0x04 -+ -+#ifndef __ASSEMBLER__ -+ -+/* include common stuff */ -+#include <s3c24x0.h> -+ -+typedef enum { -+ S3C24X0_UART0, -+ S3C24X0_UART1, -+ S3C24X0_UART2 -+} S3C24X0_UARTS_NR; -+ -+static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void) -+{ -+ return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE; -+} -+static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void) -+{ -+ return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE; -+} -+static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void) -+{ -+ return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE; -+} -+static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void) -+{ -+ return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE; -+} -+static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void) -+{ -+ return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE; -+} -+static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void) -+{ -+ return (S3C24X0_LCD * const)S3C24X0_LCD_BASE; -+} -+static inline S3C2440_NAND * S3C2440_GetBase_NAND(void) -+{ -+ return (S3C2440_NAND * const)S3C2440_NAND_BASE; -+} -+static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) -+{ -+ return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000)); -+} -+static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void) -+{ -+ return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE; -+} -+static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void) -+{ -+ return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE; -+} -+static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void) -+{ -+ return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE; -+} -+static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void) -+{ -+ return (S3C24X0_I2C * const)S3C24X0_I2C_BASE; -+} -+static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void) -+{ -+ return (S3C24X0_I2S * const)S3C24X0_I2S_BASE; -+} -+static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void) -+{ -+ return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE; -+} -+static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void) -+{ -+ return (S3C24X0_RTC * const)S3C24X0_RTC_BASE; -+} -+/* -+static inline S3C2440_ADC * S3C2440_GetBase_ADC(void) -+{ -+ return (S3C2440_ADC * const)S3C2440_ADC_BASE; -+} -+static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void) -+{ -+ return (S3C24X0_SPI * const)S3C24X0_SPI_BASE; -+} -+*/ -+static inline S3C2410_SDI * S3C2410_GetBase_SDI(void) -+{ -+ return (S3C2410_SDI * const)S3C2440_SDI_BASE; -+} -+ -+#endif /* __ASSEMBLER__ */ -+ -+/* ISR */ -+#define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0)) -+#define pISR_UNDEF (*(unsigned *)(_ISR_STARTADDRESS+0x4)) -+#define pISR_SWI (*(unsigned *)(_ISR_STARTADDRESS+0x8)) -+#define pISR_PABORT (*(unsigned *)(_ISR_STARTADDRESS+0xC)) -+#define pISR_DABORT (*(unsigned *)(_ISR_STARTADDRESS+0x10)) -+#define pISR_RESERVED (*(unsigned *)(_ISR_STARTADDRESS+0x14)) -+#define pISR_IRQ (*(unsigned *)(_ISR_STARTADDRESS+0x18)) -+#define pISR_FIQ (*(unsigned *)(_ISR_STARTADDRESS+0x1C)) -+ -+#define pISR_EINT0 (*(unsigned *)(_ISR_STARTADDRESS+0x20)) -+#define pISR_EINT1 (*(unsigned *)(_ISR_STARTADDRESS+0x24)) -+#define pISR_EINT2 (*(unsigned *)(_ISR_STARTADDRESS+0x28)) -+#define pISR_EINT3 (*(unsigned *)(_ISR_STARTADDRESS+0x2C)) -+#define pISR_EINT4_7 (*(unsigned *)(_ISR_STARTADDRESS+0x30)) -+#define pISR_EINT8_23 (*(unsigned *)(_ISR_STARTADDRESS+0x34)) -+#define pISR_BAT_FLT (*(unsigned *)(_ISR_STARTADDRESS+0x3C)) -+#define pISR_TICK (*(unsigned *)(_ISR_STARTADDRESS+0x40)) -+#define pISR_WDT (*(unsigned *)(_ISR_STARTADDRESS+0x44)) -+#define pISR_TIMER0 (*(unsigned *)(_ISR_STARTADDRESS+0x48)) -+#define pISR_TIMER1 (*(unsigned *)(_ISR_STARTADDRESS+0x4C)) -+#define pISR_TIMER2 (*(unsigned *)(_ISR_STARTADDRESS+0x50)) -+#define pISR_TIMER3 (*(unsigned *)(_ISR_STARTADDRESS+0x54)) -+#define pISR_TIMER4 (*(unsigned *)(_ISR_STARTADDRESS+0x58)) -+#define pISR_UART2 (*(unsigned *)(_ISR_STARTADDRESS+0x5C)) -+#define pISR_NOTUSED (*(unsigned *)(_ISR_STARTADDRESS+0x60)) -+#define pISR_DMA0 (*(unsigned *)(_ISR_STARTADDRESS+0x64)) -+#define pISR_DMA1 (*(unsigned *)(_ISR_STARTADDRESS+0x68)) -+#define pISR_DMA2 (*(unsigned *)(_ISR_STARTADDRESS+0x6C)) -+#define pISR_DMA3 (*(unsigned *)(_ISR_STARTADDRESS+0x70)) -+#define pISR_SDI (*(unsigned *)(_ISR_STARTADDRESS+0x74)) -+#define pISR_SPI0 (*(unsigned *)(_ISR_STARTADDRESS+0x78)) -+#define pISR_UART1 (*(unsigned *)(_ISR_STARTADDRESS+0x7C)) -+#define pISR_USBD (*(unsigned *)(_ISR_STARTADDRESS+0x84)) -+#define pISR_USBH (*(unsigned *)(_ISR_STARTADDRESS+0x88)) -+#define pISR_IIC (*(unsigned *)(_ISR_STARTADDRESS+0x8C)) -+#define pISR_UART0 (*(unsigned *)(_ISR_STARTADDRESS+0x90)) -+#define pISR_SPI1 (*(unsigned *)(_ISR_STARTADDRESS+0x94)) -+#define pISR_RTC (*(unsigned *)(_ISR_STARTADDRESS+0x98)) -+#define pISR_ADC (*(unsigned *)(_ISR_STARTADDRESS+0xA0)) -+ -+ -+/* PENDING BIT */ -+#define BIT_EINT0 (0x1) -+#define BIT_EINT1 (0x1<<1) -+#define BIT_EINT2 (0x1<<2) -+#define BIT_EINT3 (0x1<<3) -+#define BIT_EINT4_7 (0x1<<4) -+#define BIT_EINT8_23 (0x1<<5) -+#define BIT_BAT_FLT (0x1<<7) -+#define BIT_TICK (0x1<<8) -+#define BIT_WDT (0x1<<9) -+#define BIT_TIMER0 (0x1<<10) -+#define BIT_TIMER1 (0x1<<11) -+#define BIT_TIMER2 (0x1<<12) -+#define BIT_TIMER3 (0x1<<13) -+#define BIT_TIMER4 (0x1<<14) -+#define BIT_UART2 (0x1<<15) -+#define BIT_LCD (0x1<<16) -+#define BIT_DMA0 (0x1<<17) -+#define BIT_DMA1 (0x1<<18) -+#define BIT_DMA2 (0x1<<19) -+#define BIT_DMA3 (0x1<<20) -+#define BIT_SDI (0x1<<21) -+#define BIT_SPI0 (0x1<<22) -+#define BIT_UART1 (0x1<<23) -+#define BIT_USBD (0x1<<25) -+#define BIT_USBH (0x1<<26) -+#define BIT_IIC (0x1<<27) -+#define BIT_UART0 (0x1<<28) -+#define BIT_SPI1 (0x1<<29) -+#define BIT_RTC (0x1<<30) -+#define BIT_ADC (0x1<<31) -+#define BIT_ALLMSK (0xFFFFFFFF) -+ -+#define ClearPending(bit) {\ -+ rSRCPND = bit;\ -+ rINTPND = bit;\ -+ rINTPND;\ -+ } -+/* Wait until rINTPND is changed for the case that the ISR is very short. */ -+ -+#define __REG(x) (*(volatile unsigned long *)(x)) -+#define __REGl(x) (*(volatile unsigned long *)(x)) -+#define __REGw(x) (*(volatile unsigned short *)(x)) -+#define __REGb(x) (*(volatile unsigned char *)(x)) -+#define __REG2(x,y) (*(volatile unsigned long *)((x) + (y))) -+ -+/* -+ * * Nand flash controller -+ * */ -+ -+#define NFDATA8 (*(volatile unsigned char *)0x4E000010) -+#define NFDATA16 (*(volatile unsigned short *)0x4E000010) -+#define NFDATA32 (*(volatile unsigned *)0x4E000010) -+ -+#define NFCONF __REG(0x4E000000) -+#define NFCONT __REG(0x4E000004) -+#define NFCMD __REG(0x4E000008) -+#define NFADDR __REGb(0x4E00000C) -+#define NFMECCD0 __REG(0x4E000014) -+#define NFMECCD1 __REG(0x4E000018) -+#define NFSECCD __REG(0x4E00001C) -+#define NFSTAT __REG(0x4E000020) -+#define NFESTAT0 __REG(0x4E000024) -+#define NFESTAT1 __REG(0x4E000028) -+#define NFMECC0 __REG(0x4E00002C) -+#define NFMECC1 __REG(0x4E000030) -+#define NFSECC __REG(0x4E000034) -+#define NFSBLK __REG(0x4E000038) -+ -+ -+#define S3C2410_MISCCR_USBDEV (0<<3) -+#define S3C2410_MISCCR_USBHOST (1<<3) -+ -+#define S3C2410_MISCCR_CLK0_MPLL (0<<4) -+#define S3C2410_MISCCR_CLK0_UPLL (1<<4) -+#define S3C2410_MISCCR_CLK0_FCLK (2<<4) -+#define S3C2410_MISCCR_CLK0_HCLK (3<<4) -+#define S3C2410_MISCCR_CLK0_PCLK (4<<4) -+#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) -+#define S3C2410_MISCCR_CLK0_MASK (7<<4) -+ -+#define S3C2410_MISCCR_CLK1_MPLL (0<<8) -+#define S3C2410_MISCCR_CLK1_UPLL (1<<8) -+#define S3C2410_MISCCR_CLK1_FCLK (2<<8) -+#define S3C2410_MISCCR_CLK1_HCLK (3<<8) -+#define S3C2410_MISCCR_CLK1_PCLK (4<<8) -+#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) -+#define S3C2410_MISCCR_CLK1_MASK (7<<8) -+ -+#define S3C2410_MISCCR_USBSUSPND0 (1<<12) -+#define S3C2410_MISCCR_USBSUSPND1 (1<<13) -+ -+#define S3C2410_MISCCR_nRSTCON (1<<16) -+ -+#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) -+#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) -+#define S3C2410_MISCCR_nEN_SCLKE (1<<19) -+#define S3C2410_MISCCR_SDSLEEP (7<<17) -+ -+#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) -+#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) -+#define S3C2410_CLKSLOW_SLOW (1<<4) -+#define S3C2410_CLKSLOW_SLOWVAL(x) (x) -+#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) -+ -+#endif /*__S3C2440_H__*/ -Index: u-boot/include/common.h -=================================================================== ---- u-boot.orig/include/common.h -+++ u-boot/include/common.h -@@ -454,7 +454,7 @@ - ulong get_OPB_freq (void); - ulong get_PCI_freq (void); - #endif --#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X) -+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || defined(CONFIG_LH7A40X) - void s3c2410_irq(void); - #define ARM920_IRQ_CALLBACK s3c2410_irq - ulong get_FCLK (void); -Index: u-boot/cpu/arm920t/s3c24x0/usb_ohci.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/usb_ohci.c -+++ u-boot/cpu/arm920t/s3c24x0/usb_ohci.c -@@ -44,6 +44,8 @@ - #include <s3c2400.h> - #elif defined(CONFIG_S3C2410) - #include <s3c2410.h> -+#elif defined(CONFIG_S3C2440) -+#include <s3c2440.h> - #endif - - #include <malloc.h> -Index: u-boot/cpu/arm920t/s3c24x0/speed.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/speed.c -+++ u-boot/cpu/arm920t/s3c24x0/speed.c -@@ -30,12 +30,15 @@ - */ - - #include <common.h> --#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) -+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \ -+ defined (CONFIG_S3C2440) || defined (CONFIG_TRAB) - - #if defined(CONFIG_S3C2400) - #include <s3c2400.h> - #elif defined(CONFIG_S3C2410) - #include <s3c2410.h> -+#elif defined(CONFIG_S3C2440) -+#include <s3c2440.h> - #endif - - #define MPLL 0 -@@ -66,8 +69,12 @@ - m = ((r & 0xFF000) >> 12) + 8; - p = ((r & 0x003F0) >> 4) + 2; - s = r & 0x3; -- -+#ifndef CONFIG_S3C2440 - return((CONFIG_SYS_CLK_FREQ * m) / (p << s)); -+#else -+ /* To avoid integer overflow, changed the calc order */ -+ return( 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s )) ); -+#endif - } - - /* return FCLK frequency */ -@@ -81,7 +88,21 @@ - { - S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); - -+#ifndef CONFIG_S3C2440 - return((clk_power->CLKDIVN & 0x2) ? get_FCLK()/2 : get_FCLK()); -+#else -+ switch (clk_power->CLKDIVN & 0x6) { -+ case 0x0: -+ return get_FCLK(); -+ case 0x2: -+ return get_FCLK()/2; -+ case 0x4: -+ return (clk_power->CAMDIVN & 0x200) ? get_FCLK()/8 : get_FCLK()/4; -+ case 0x6: -+ return (clk_power->CAMDIVN & 0x100) ? get_FCLK()/6 : get_FCLK()/3; -+ } -+ return 0; -+#endif - } - - /* return PCLK frequency */ -@@ -98,4 +119,5 @@ - return(get_PLLCLK(UPLL)); - } - --#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ -+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || -+ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */ -Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c -+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c -@@ -30,13 +30,16 @@ - */ - - #include <common.h> --#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) -+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \ -+ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) - - #include <arm920t.h> - #if defined(CONFIG_S3C2400) - #include <s3c2400.h> - #elif defined(CONFIG_S3C2410) - #include <s3c2410.h> -+#elif defined(CONFIG_S3C2440) -+#include <s3c2440.h> - #endif - - int timer_load_val = 0; -@@ -59,6 +62,7 @@ - /* use PWM Timer 4 because it has no output */ - /* prescaler for Timer 4 is 16 */ - timers->TCFG0 = 0x0f00; -+#ifndef CONFIG_S3C2440 - if (timer_load_val == 0) - { - /* -@@ -68,6 +72,9 @@ - */ - timer_load_val = get_PCLK()/(2 * 16 * 100); - } -+#else -+ timer_load_val = get_PCLK()/(2 * 16 * 100); -+#endif - /* load value for 10 ms timeout */ - lastdec = timers->TCNTB4 = timer_load_val; - /* auto load, manual update of Timer 4 */ -@@ -178,6 +185,7 @@ - tbclk = timer_load_val * 100; - #elif defined(CONFIG_SBC2410X) || \ - defined(CONFIG_SMDK2410) || \ -+ defined(CONFIG_SMDK2440) || \ - defined(CONFIG_VCMA9) - tbclk = CFG_HZ; - #else -@@ -232,4 +240,5 @@ - } - #endif /* USE_IRQ */ - --#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ -+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || -+ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */ -Index: u-boot/cpu/arm920t/s3c24x0/serial.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/serial.c -+++ u-boot/cpu/arm920t/s3c24x0/serial.c -@@ -19,12 +19,15 @@ - */ - - #include <common.h> --#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) -+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \ -+ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) - - #if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB) - #include <s3c2400.h> - #elif defined(CONFIG_S3C2410) - #include <s3c2410.h> -+#elif defined(CONFIG_S3C2440) -+#include <s3c2440.h> - #endif - - DECLARE_GLOBAL_DATA_PTR; -@@ -180,4 +183,5 @@ - } - } - --#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ -+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || -+ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */ -Index: u-boot/cpu/arm920t/s3c24x0/i2c.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/i2c.c -+++ u-boot/cpu/arm920t/s3c24x0/i2c.c -@@ -34,6 +34,8 @@ - #include <s3c2400.h> - #elif defined(CONFIG_S3C2410) - #include <s3c2410.h> -+#elif defined(CONFIG_S3C2440) -+#include <s3c2440.h> - #endif - #include <i2c.h> - -@@ -63,7 +65,7 @@ - { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); - --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - return (gpio->GPEDAT & 0x8000) >> 15; - #endif - #ifdef CONFIG_S3C2400 -@@ -82,7 +84,7 @@ - { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); - --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14; - #endif - #ifdef CONFIG_S3C2400 -@@ -139,7 +141,7 @@ - } - - if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) { --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - ulong old_gpecon = gpio->GPECON; - #endif - #ifdef CONFIG_S3C2400 -@@ -147,7 +149,7 @@ - #endif - /* bus still busy probably by (most) previously interrupted transfer */ - --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */ - gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000; - #endif -@@ -171,7 +173,7 @@ - udelay (1000); - - /* restore pin functions */ --#ifdef CONFIG_S3C2410 -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - gpio->GPECON = old_gpecon; - #endif - #ifdef CONFIG_S3C2400 -Index: u-boot/drivers/usbdcore_s3c2410.c -=================================================================== ---- u-boot.orig/drivers/usbdcore_s3c2410.c -+++ u-boot/drivers/usbdcore_s3c2410.c -@@ -24,7 +24,7 @@ - - #include <config.h> - --#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE) -+#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) && defined(CONFIG_USB_DEVICE) - - #include <common.h> - -Index: u-boot/drivers/usbtty.h -=================================================================== ---- u-boot.orig/drivers/usbtty.h -+++ u-boot/drivers/usbtty.h -@@ -29,7 +29,7 @@ - #include "usbdcore_mpc8xx.h" - #elif defined(CONFIG_OMAP1510) - #include "usbdcore_omap1510.h" --#elif defined(CONFIG_S3C2410) -+#elif defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - #include "usbdcore_s3c2410.h" - #endif - -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S -+++ u-boot/cpu/arm920t/start.S -@@ -31,7 +31,11 @@ - - #include <config.h> - #include <version.h> -+#if defined(CONFIG_S3C2410) - #include <s3c2410.h> -+#elif defined(CONFIG_S3C2440) -+#include <s3c2440.h> -+#endif - - - /* -@@ -142,14 +146,32 @@ - # define pWTCON 0x15300000 - # define INTMSK 0x14400008 /* Interupt-Controller base addresses */ - # define CLKDIVN 0x14800014 /* clock divisor register */ --#elif defined(CONFIG_S3C2410) -+#elif defined(CONFIG_S3C2410) || defined (CONFIG_S3C2440) - # define pWTCON 0x53000000 - # define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ - # define INTSUBMSK 0x4A00001C - # define CLKDIVN 0x4C000014 /* clock divisor register */ - #endif - --#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) -+#if defined(CONFIG_S3C2410) -+# define INTSUBMSK_val 0x7ff -+# define MPLLCON_val ((0x90 << 12) + (0x7 << 4) + 0x0) /* 202 MHz */ -+# define UPLLCON_val ((0x78 << 12) + (0x2 << 4) + 0x3) -+# define CLKDIVN_val 3 /* FCLK:HCLK:PCLK = 1:2:4 */ -+#elif defined(CONFIG_S3C2440) -+# define INTSUBMSK_val 0xffff -+#if (CONFIG_SYS_CLK_FREQ == 16934400) -+# define MPLLCON_val ((0x61 << 12) + (0x1 << 4) + 0x2) /* 296.35 MHz */ -+# define UPLLCON_val ((0x3c << 12) + (0x4 << 4) + 0x2) /* 47.98 MHz */ -+#else if (CONFIG_SYS_CLK_FREQ == 12000000) -+# define MPLLCON_val ((0x44 << 12) + (0x1 << 4) + 0x1) /* 304.00 MHz */ -+# define UPLLCON_val ((0x38 << 12) + (0x2 << 4) + 0x2) /* 48.00 MHz */ -+#endif -+# define CLKDIVN_val 7 /* FCLK:HCLK:PCLK = 1:3:6 */ -+# define CAMDIVN 0x4C000018 -+#endif -+ -+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - ldr r0, =pWTCON - mov r1, #0x0 - str r1, [r0] -@@ -160,24 +182,34 @@ - mov r1, #0xffffffff - ldr r0, =INTMSK - str r1, [r0] --# if defined(CONFIG_S3C2410) -- ldr r1, =0x3ff -+# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) -+ ldr r1, =INTSUBMSK_val - ldr r0, =INTSUBMSK - str r1, [r0] - # endif - -- /* default FCLK is 202 MHz ! */ -+#if defined(CONFIG_S3C2440) -+ /* Make sure we get FCLK:HCLK:PCLK = 1:3:6 */ -+ ldr r0, =CAMDIVN -+ mov r1, #0 -+ str r1, [r0] -+#endif -+ -+ /* Clock asynchronous mode */ -+ mrc p15, 0, r1, c1, c0, 0 -+ orr r1, r1, #0xc0000000 -+ mcr p15, 0, r1, c1, c0, 0 -+ -+ - #define LOCKTIME 0x4c000000 - #define UPLLCON 0x4c000008 --//#define MPLLCFG ((0x90 << 12) + (0x2 << 4) + 0x2) --#define MPLLCFG ((0x90 << 12) + (0x7 << 4) + 0x0) --#define UPLLCFG ((0x78 << 12) + (0x2 << 4) + 0x3) -+ - ldr r0, =LOCKTIME - mov r1, #0xffffff - str r1, [r0] - - ldr r0, =UPLLCON -- ldr r1, =UPLLCFG -+ ldr r1, =UPLLCON_val - str r1, [r0] - - /* Page 7-19, seven nops between UPLL and MPLL */ -@@ -189,12 +221,12 @@ - nop - nop - -- ldr r1, =MPLLCFG -+ ldr r1, =MPLLCON_val - str r1, [r0, #-4] /* MPLLCON */ - - /* FCLK:HCLK:PCLK = 1:2:4 */ - ldr r0, =CLKDIVN -- mov r1, #3 -+ mov r1, #CLKDIVN_val - str r1, [r0] - - #if 1 -@@ -222,7 +254,7 @@ - str r1, [r0, #0x28] - #endif - --#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ -+#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 */ - - #ifndef CONFIG_SKIP_LOWLEVEL_INIT - #ifndef CONFIG_LL_INIT_NAND_ONLY -@@ -279,7 +311,7 @@ - #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY) - bl cpu_init_crit - #endif --#if defined(CONFIG_S3C2410) -+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) - /* ensure some refresh has happened */ - ldr r1, =0xfffff - 1: subs r1, r1, #1 -@@ -290,11 +322,12 @@ - ldr r0, [ r1 ] - tst r0, #0x02 /* is this resume from power down */ - ldrne pc, [r1, #4] /* gstatus3 */ --#endif /* CONFIG_S3C2410 */ -+#endif /* CONFIG_S3C2410 || CONFIG_S3C2440 */ - #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - - /* mov r10, lr */ - -+#if defined(CONFIG_S3C2410) - @ reset NAND - mov r1, #S3C2410_NAND_BASE - ldr r2, =0xf842 @ initial value enable tacls=3,rph0=6,rph1=0 -@@ -314,6 +347,17 @@ - ldr r2, [r1, #oNFCONF] - orr r2, r2, #0x800 @ disable chip - str r2, [r1, #oNFCONF] -+#elif defined(CONFIG_S3C2440) -+ mov r1, #S3C2440_NAND_BASE -+ ldr r2, =0xfff0 @ initial value tacls=3,rph0=7,rph1=7 -+ ldr r3, [r1, #oNFCONF] -+ orr r3, r3, r2 -+ str r3, [r1, #oNFCONF] -+ -+ ldr r3, [r1, #oNFCONT] -+ orr r3, r3, #1 @ enable nand controller -+ str r3, [r1, #oNFCONT] -+#endif - - #if 0 - @ get ready to call C functions (for nand_read()) -@@ -382,7 +426,7 @@ - #endif /* CONFIG_S3C2410_NAND_BOOT */ - done_relocate: - --#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C2410) -+#if defined(CONFIG_USE_IRQ) && (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) - /* In the case of the S3C2410, if we've somehow magically (JTAG, ...) - ended up in RAM, then that ram is mapped to 0x30000000 and not 0. - So we need to copy the interrupt vectors, etc. */ -Index: u-boot/cpu/arm920t/s3c24x0/nand_read.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/nand_read.c -+++ u-boot/cpu/arm920t/s3c24x0/nand_read.c -@@ -16,30 +16,141 @@ - */ - - #include <common.h> -+#include <linux/mtd/nand.h> - - #ifdef CONFIG_S3C2410_NAND_BOOT - - #define __REGb(x) (*(volatile unsigned char *)(x)) -+#define __REGw(x) (*(volatile unsigned short *)(x)) - #define __REGi(x) (*(volatile unsigned int *)(x)) - #define NF_BASE 0x4e000000 -+#if defined(CONFIG_S3C2410) - #define NFCONF __REGi(NF_BASE + 0x0) - #define NFCMD __REGb(NF_BASE + 0x4) - #define NFADDR __REGb(NF_BASE + 0x8) - #define NFDATA __REGb(NF_BASE + 0xc) - #define NFSTAT __REGb(NF_BASE + 0x10) -+#define NFSTAT_BUSY 1 -+#define nand_select() (NFCONF &= ~0x800) -+#define nand_deselect() (NFCONF |= 0x800) -+#define nand_clear_RnB() do {} while (0) -+#elif defined(CONFIG_S3C2440) -+#define NFCONF __REGi(NF_BASE + 0x0) -+#define NFCONT __REGi(NF_BASE + 0x4) -+#define NFCMD __REGb(NF_BASE + 0x8) -+#define NFADDR __REGb(NF_BASE + 0xc) -+#define NFDATA __REGb(NF_BASE + 0x10) -+#define NFDATA16 __REGw(NF_BASE + 0x10) -+#define NFSTAT __REGb(NF_BASE + 0x20) -+#define NFSTAT_BUSY 1 -+#define nand_select() (NFCONT &= ~(1 << 1)) -+#define nand_deselect() (NFCONT |= (1 << 1)) -+#define nand_clear_RnB() (NFSTAT |= (1 << 2)) -+#endif - --#define BUSY 1 --inline void wait_idle(void) -+static inline void nand_wait(void) - { - int i; - -- while (!(NFSTAT & BUSY)) -+ while (!(NFSTAT & NFSTAT_BUSY)) - for (i=0; i<10; i++); - } - --#define NAND_SECTOR_SIZE 512 --#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1) --#define NAND_PAGE_SIZE 0x4000 -+#if defined(CONFIG_S3C2410) -+/* configuration for 2410 with 512byte sized flash */ -+#define NAND_PAGE_SIZE 512 -+#define BAD_BLOCK_OFFSET 517 -+#define NAND_BLOCK_MASK (NAND_PAGE_SIZE - 1) -+#define NAND_BLOCK_SIZE 0x4000 -+#else -+/* configuration for 2440 with 2048byte sized flash */ -+#define NAND_5_ADDR_CYCLE -+#define NAND_PAGE_SIZE 2048 -+#define BAD_BLOCK_OFFSET NAND_PAGE_SIZE -+#define NAND_BLOCK_MASK (NAND_PAGE_SIZE - 1) -+#define NAND_BLOCK_SIZE (NAND_PAGE_SIZE * 64) -+#endif -+ -+/* compile time failure in case of an invalid configuration */ -+#if defined(CONFIG_S3C2410) && (NAND_PAGE_SIZE != 512) -+#error "S3C2410 does not support nand page size != 512" -+#endif -+ -+static int is_bad_block(unsigned long i) -+{ -+ unsigned char data; -+ unsigned long page_num; -+ -+ /* FIXME: do this twice, for first and second page in block */ -+ -+ nand_clear_RnB(); -+#if (NAND_PAGE_SIZE == 512) -+ NFCMD = NAND_CMD_READOOB; /* 0x50 */ -+ NFADDR = BAD_BLOCK_OFFSET & 0xf; -+ NFADDR = (i >> 9) & 0xff; -+ NFADDR = (i >> 17) & 0xff; -+ NFADDR = (i >> 25) & 0xff; -+#elif (NAND_PAGE_SIZE == 2048) -+ page_num = i >> 11; /* addr / 2048 */ -+ NFCMD = NAND_CMD_READ0; -+ NFADDR = BAD_BLOCK_OFFSET & 0xff; -+ NFADDR = (BAD_BLOCK_OFFSET >> 8) & 0xff; -+ NFADDR = page_num & 0xff; -+ NFADDR = (page_num >> 8) & 0xff; -+ NFADDR = (page_num >> 16) & 0xff; -+ NFCMD = NAND_CMD_READSTART; -+#endif -+ nand_wait(); -+ data = (NFDATA & 0xff); -+ if (data != 0xff) -+ return 1; -+ -+ return 0; -+} -+ -+static int nand_read_page_ll(unsigned char *buf, unsigned long addr) -+{ -+ unsigned short *ptr16 = (unsigned short *)buf; -+ unsigned int i, page_num; -+ -+ nand_clear_RnB(); -+ -+ NFCMD = NAND_CMD_READ0; -+ -+#if (NAND_PAGE_SIZE == 512) -+ /* Write Address */ -+ NFADDR = addr & 0xff; -+ NFADDR = (addr >> 9) & 0xff; -+ NFADDR = (addr >> 17) & 0xff; -+ NFADDR = (addr >> 25) & 0xff; -+#elif (NAND_PAGE_SIZE == 2048) -+ page_num = addr >> 11; /* addr / 2048 */ -+ /* Write Address */ -+ NFADDR = 0; -+ NFADDR = 0; -+ NFADDR = page_num & 0xff; -+ NFADDR = (page_num >> 8) & 0xff; -+ NFADDR = (page_num >> 16) & 0xff; -+ NFCMD = NAND_CMD_READSTART; -+#else -+#error "unsupported nand page size" -+#endif -+ nand_wait(); -+ -+#if defined(CONFIG_S3C2410) -+ for (i = 0; i < NAND_PAGE_SIZE; i++) { -+ *buf = (NFDATA & 0xff); -+ buf++; -+ } -+#elif defined(CONFIG_S3C2440) -+ for (i = 0; i < NAND_PAGE_SIZE/2; i++) { -+ *ptr16 = NFDATA16; -+ ptr16++; -+ } -+#endif -+ -+ return NAND_PAGE_SIZE; -+} - - /* low level nand read function */ - int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size) -@@ -50,47 +161,28 @@ - return -1; /* invalid alignment */ - - /* chip Enable */ -- NFCONF &= ~0x800; -+ nand_select(); -+ nand_clear_RnB(); - for (i=0; i<10; i++); - - for (i=start_addr; i < (start_addr + size);) { - #ifdef CONFIG_S3C2410_NAND_SKIP_BAD -- if (start_addr % NAND_PAGE_SIZE == 0) { -- unsigned char data; -- NFCMD = 0x50; -- NFADDR = 517&0xf; -- NFADDR = (i >> 9) & 0xff; -- NFADDR = (i >> 17) & 0xff; -- NFADDR = (i >> 25) & 0xff; -- wait_idle(); -- data = (NFDATA & 0xff); -- if (data != 0xff) { -+ if (start_addr % NAND_BLOCK_SIZE == 0) { -+ if (is_bad_block(i)) { - /* Bad block */ -- i += NAND_PAGE_SIZE; -- size += NAND_PAGE_SIZE; -+ i += NAND_BLOCK_SIZE; -+ size += NAND_BLOCK_SIZE; - continue; - } - } - #endif -- /* READ0 */ -- NFCMD = 0; -- -- /* Write Address */ -- NFADDR = i & 0xff; -- NFADDR = (i >> 9) & 0xff; -- NFADDR = (i >> 17) & 0xff; -- NFADDR = (i >> 25) & 0xff; -- -- wait_idle(); -- -- for (j=0; j < NAND_SECTOR_SIZE; j++, i++) { -- *buf = (NFDATA & 0xff); -- buf++; -- } -+ j = nand_read_page_ll(buf, i); -+ i += j; -+ buf += j; - } - - /* chip Disable */ -- NFCONF |= 0x800; /* chip disable */ -+ nand_deselect(); - - return 0; - } -Index: u-boot/cpu/arm920t/s3c24x0/nand.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c -+++ u-boot/cpu/arm920t/s3c24x0/nand.c -@@ -36,24 +36,54 @@ - #define __REGi(x) (*(volatile unsigned int *)(x)) - - #define NF_BASE 0x4e000000 -+ - #define NFCONF __REGi(NF_BASE + 0x0) --#define NFCMD __REGb(NF_BASE + 0x4) --#define NFADDR __REGb(NF_BASE + 0x8) --#define NFDATA __REGb(NF_BASE + 0xc) --#define NFSTAT __REGb(NF_BASE + 0x10) -+ -+#if defined(CONFIG_S3C2410) -+ -+#define oNFCMD 0x4 -+#define oNFADDR 0x8 -+#define oNFDATA 0xc -+#define oNFSTAT 0x10 - #define NFECC0 __REGb(NF_BASE + 0x14) - #define NFECC1 __REGb(NF_BASE + 0x15) - #define NFECC2 __REGb(NF_BASE + 0x16) -+#define NFCONF_nFCE (1<<11) - - #define S3C2410_NFCONF_EN (1<<15) - #define S3C2410_NFCONF_512BYTE (1<<14) - #define S3C2410_NFCONF_4STEP (1<<13) - #define S3C2410_NFCONF_INITECC (1<<12) --#define S3C2410_NFCONF_nFCE (1<<11) - #define S3C2410_NFCONF_TACLS(x) ((x)<<8) - #define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) - #define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) - -+#elif defined(CONFIG_S3C2440) -+ -+#define oNFCMD 0x8 -+#define oNFADDR 0xc -+#define oNFDATA 0x10 -+#define oNFSTAT 0x20 -+ -+#define NFCONT __REGi(NF_BASE + 0x04) -+#define NFMECC0 __REGi(NF_BASE + 0x2C) -+#define NFCONF_nFCE (1<<1) -+#define S3C2440_NFCONF_INITECC (1<<4) -+#define S3C2440_NFCONF_MAINECCLOCK (1<<5) -+#define nand_select() (NFCONT &= ~(1 << 1)) -+#define nand_deselect() (NFCONT |= (1 << 1)) -+#define nand_clear_RnB() (NFSTAT |= (1 << 2)) -+#define nand_detect_RB() { while(!(NFSTAT&(1<<2))); } -+#define nand_wait() { while(!(NFSTAT & 0x4)); } /* RnB_TransDectect */ -+ -+#endif -+ -+#define NFCMD __REGb(NF_BASE + oNFCMD) -+#define NFADDR __REGb(NF_BASE + oNFADDR) -+#define NFDATA __REGb(NF_BASE + oNFDATA) -+#define NFSTAT __REGb(NF_BASE + oNFSTAT) -+ -+ - static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd) - { - struct nand_chip *chip = mtd->priv; -@@ -62,23 +92,31 @@ - - switch (cmd) { - case NAND_CTL_SETNCE: -- NFCONF &= ~S3C2410_NFCONF_nFCE; -+#if defined(CONFIG_S3C2410) -+ NFCONF &= ~NFCONF_nFCE; -+#elif defined(CONFIG_S3C2440) -+ NFCONT &= ~NFCONF_nFCE; -+#endif - DEBUGN("NFCONF=0x%08x\n", NFCONF); - break; - case NAND_CTL_CLRNCE: -- NFCONF |= S3C2410_NFCONF_nFCE; -+#if defined(CONFIG_S3C2410) -+ NFCONF |= NFCONF_nFCE; -+#elif defined(CONFIG_S3C2440) -+ NFCONT &= ~NFCONF_nFCE; -+#endif - DEBUGN("NFCONF=0x%08x\n", NFCONF); - break; - case NAND_CTL_SETALE: -- chip->IO_ADDR_W = NF_BASE + 0x8; -+ chip->IO_ADDR_W = NF_BASE + oNFADDR; - DEBUGN("SETALE\n"); - break; - case NAND_CTL_SETCLE: -- chip->IO_ADDR_W = NF_BASE + 0x4; -+ chip->IO_ADDR_W = NF_BASE + oNFCMD; - DEBUGN("SETCLE\n"); - break; - default: -- chip->IO_ADDR_W = NF_BASE + 0xc; -+ chip->IO_ADDR_W = NF_BASE + oNFDATA; - break; - } - return; -@@ -180,16 +218,21 @@ - /* initialize hardware */ - twrph0 = 3; twrph1 = 0; tacls = 0; - -+#if defined(CONFIG_S3C2410) - cfg = S3C2410_NFCONF_EN; - cfg |= S3C2410_NFCONF_TACLS(tacls - 1); - cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); - cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); - - NFCONF = cfg; -- //NFCONF = 0xf842; -+#elif defined(CONFIG_S3C2440) -+ twrph0 = 7; twrph1 = 7; tacls = 7; -+ NFCONF = (tacls<<12)|(twrph0<<8)|(twrph1<<4)|(0<<0); -+ NFCONT = (0<<13)|(0<<12)|(0<<10)|(0<<9)|(0<<8)|(1<<6)|(1<<5)|(1<<4)|(1<<1)|(1<<0); -+#endif - - /* initialize nand_chip data structure */ -- nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c; -+ nand->IO_ADDR_R = nand->IO_ADDR_W = NF_BASE + oNFDATA; - - /* read_buf and write_buf are default */ - /* read_byte and write_byte are default */ -@@ -214,12 +257,23 @@ - nand->options = 0; - #endif - -+#if defined(CONFIG_S3C2440) -+/* -+ nand_select(); -+ nand_clear_RnB(); -+ NFCMD = NAND_CMD_RESET; -+ { volatile int i; for (i = 0; i < 10; i ++); } -+ nand_detect_RB(); -+ nand_deselect(); -+*/ -+#endif -+ - DEBUGN("end of nand_init\n"); - - return 0; - } - - #else -- #error "U-Boot legacy NAND support not available for S3C2410" -+ #error "U-Boot legacy NAND support not available for S3C24xx" - #endif - #endif -Index: u-boot/cpu/arm920t/s3c24x0/mmc.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/mmc.c -+++ u-boot/cpu/arm920t/s3c24x0/mmc.c -@@ -137,6 +137,9 @@ - dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART; - if (wide) - dcon |= S3C2410_SDIDCON_WIDEBUS; -+#if defined(CONFIG_S3C2440) -+ dcon |= S3C2440_SDIDCON_DS_WORD | S3C2440_SDIDCON_DATSTART; -+#endif - sdi->SDIDCON = dcon; - - /* send read command */ -@@ -394,13 +397,18 @@ - - clk_power->CLKCON |= (1 << 9); - -+ sdi->SDIBSIZE = 512; -+#if defined(CONFIG_S3C2410) - /* S3C2410 has some bug that prevents reliable operation at higher speed */ - //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ -- sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ -- sdi->SDIBSIZE = 512; -+ sdi->SDIPRE = 0x02; /* 2410: SDCLK = PCLK/2 / (SDIPRE+1) = 11MHz */ - sdi->SDIDTIMER = 0xffff; -+#elif defined(CONFIG_S3C2440) -+ sdi->SDIPRE = 0x05; /* 2410: SDCLK = PCLK / (SDIPRE+1) = 11MHz */ -+ sdi->SDIDTIMER = 0x7fffff; -+#endif - sdi->SDIIMSK = 0x0; -- sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK; -+ sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2410_SDICON_CLOCKTYPE; - udelay(125000); /* FIXME: 74 SDCLK cycles */ - - mmc_csd.c_size = 0; diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2443.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2443.patch deleted file mode 100644 index 62ae5592ab..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2443.patch +++ /dev/null @@ -1,256 +0,0 @@ -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S -+++ u-boot/cpu/arm920t/start.S -@@ -35,6 +35,8 @@ - #include <s3c2410.h> - #elif defined(CONFIG_S3C2440) - #include <s3c2440.h> -+#elif defined(CONFIG_S3C2443) -+#include <s3c2443.h> - #endif - - -@@ -164,9 +166,15 @@ - # define UPLLCON_val ((0x3c << 12) + (0x4 << 4) + 0x2) - # define CLKDIVN_val 7 /* FCLK:HCLK:PCLK = 1:3:6 */ - # define CAMDIVN 0x4C000018 -+#elif defined(CONFIG_S3C2443) -+# define INTSUBMSK_val 0x1fffffff -+# define EPLLCON_val ((40 << 16) | (1 << 8) | (1)) /* 96 MHz */ -+# define MPLLCON_val ((81 << 16) | (2 << 8) | (0)) /* 1068 MHz */ -+# define CLKDIV0_val ((8 << 9) | (1 << 4) | (1 << 3) | (1 << 2) - #endif - --#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) -+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || \ -+ defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443) - ldr r0, =pWTCON - mov r1, #0x0 - str r1, [r0] -@@ -177,7 +185,7 @@ - mov r1, #0xffffffff - ldr r0, =INTMSK - str r1, [r0] --# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) -+# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443) - ldr r1, =INTSUBMSK_val - ldr r0, =INTSUBMSK - str r1, [r0] -@@ -196,6 +204,43 @@ - mcr p15, 0, r1, c1, c0, 0 - - -+#if defined(CONFIG_S3C2443) -+#define LOCKCON0 0x4c000000 -+#define LOCKCON1 0x4c000004 -+#define MPLLCON 0x4c000010 -+#define EPLLCON 0x4c000018 -+ -+ ldr r0, =CLKDIV0 -+ ldr r1, =CLKDIV0_val -+ str r1, [r0] -+ -+ /* set safe (way too long) locktime for both PLLs */ -+ ldr r0, =LOCKCON0 -+ mov r1, #0xffffff -+ str r1, [r0] -+ ldr r0, =LOCKCON1 -+ str r1, [r0] -+ -+ /* configure MPLL */ -+ ldr r0, =MPLLCON -+ ldr r1, =MPLLCON_val -+ str r1, [r0] -+ -+ /* select MPLL clock out for SYSCLK */ -+ ldr r0, =CLKSRC -+ ldr r1, [r0] -+ orr r1, r1, #0x10 -+ str r1, [r0] -+ -+#if 0 -+ /* configure EPLL */ -+ ldr r0, =EPLLCON -+ ldr r1, =EPLLCON_val -+ str r1, [r0] -+#endif -+ -+ -+#else /* i.e. 2440, 2410 and 2440 */ - #define LOCKTIME 0x4c000000 - #define UPLLCON 0x4c000008 - -@@ -223,6 +268,7 @@ - ldr r0, =CLKDIVN - mov r1, #CLKDIVN_val - str r1, [r0] -+#endif - - #if 1 - /* enable uart */ -@@ -249,7 +295,7 @@ - str r1, [r0, #0x28] - #endif - --#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 */ -+#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 || CONFIG_S3C2443 */ - - #ifndef CONFIG_SKIP_LOWLEVEL_INIT - #ifndef CONFIG_LL_INIT_NAND_ONLY -Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c -=================================================================== ---- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c -+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c -@@ -31,7 +31,8 @@ - - #include <common.h> - #if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \ -- defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) -+ defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443) || \ -+ defined (CONFIG_TRAB) - - #include <arm920t.h> - #if defined(CONFIG_S3C2400) -@@ -40,6 +41,8 @@ - #include <s3c2410.h> - #elif defined(CONFIG_S3C2440) - #include <s3c2440.h> -+#elif defined(CONFIG_S3C2443) -+#include <s3c2443.h> - #endif - - int timer_load_val = 0; -@@ -186,6 +189,7 @@ - #elif defined(CONFIG_SBC2410X) || \ - defined(CONFIG_SMDK2410) || \ - defined(CONFIG_SMDK2440) || \ -+ defined(CONFIG_SMDK2443) || \ - defined(CONFIG_VCMA9) - tbclk = CFG_HZ; - #else -Index: u-boot/drivers/usbdcore_s3c2410.c -=================================================================== ---- u-boot.orig/drivers/usbdcore_s3c2410.c -+++ u-boot/drivers/usbdcore_s3c2410.c -@@ -24,7 +24,8 @@ - - #include <config.h> - --#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) && defined(CONFIG_USB_DEVICE) -+#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || \ -+ defined(CONFIG_S3C2443)) && defined(CONFIG_USB_DEVICE) - - #include <common.h> - -Index: u-boot/include/s3c2443.h -=================================================================== ---- /dev/null -+++ u-boot/include/s3c2443.h -@@ -0,0 +1,106 @@ -+/* -+ * (C) Copyright 2007 OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __S3C2443_H -+#define __S3C2443_H -+ -+#include <s3c24x0.h> -+ -+/* CLOCK & POWER MANAGEMENT (see S3C2443 manual chapter 2) */ -+typedef struct { -+ S3C24X0_REG32 LOCKCON0; -+ S3C24X0_REG32 LOCKCON1; -+ S3C24X0_REG32 OSCSET; -+ S3C24X0_REG32 res1; -+ S3C24X0_REG32 MPLLCON; -+ S3C24X0_REG32 res2; -+ S3C24X0_REG32 EPLLCON; -+ S3C24X0_REG32 res3; -+ S3C24X0_REG32 CLKSRC; -+ S3C24X0_REG32 CLKDIV0; -+ S3C24X0_REG32 CLKDIV1; -+ S3C24X0_REG32 res4; -+ S3C24X0_REG32 HCLKCON; -+ S3C24X0_REG32 PCLKCON; -+ S3C24X0_REG32 SCLKCON; -+ S3C24X0_REG32 res5; -+ S3C24X0_REG32 PWRMODE; -+ S3C24X0_REG32 SWRST; -+ S3C24X0_REG32 res6[2]; -+ S3C24X0_REG32 BUSPRI0; -+ S3C24X0_REG32 res7[3]; -+} /*__attribute__((__packed__))*/ S3C2443_CLOCK_POWER; -+ -+/* NAND FLASH (see S3C2443 manual chapter 7) */ -+typedef struct { -+ S3C24X0_REG32 NFCONF; -+ S3C24X0_REG32 NFCONT; -+ S3C24X0_REG32 NFCMD; -+ S3C24X0_REG32 NFADDR; -+ S3C24X0_REG32 NFDATA; -+ S3C24X0_REG32 NFMECCD0; -+ S3C24X0_REG32 NFMECCD1; -+ S3C24X0_REG32 NFSECCD; -+ S3C24X0_REG32 NFSBLK; -+ S3C24X0_REG32 NFEBLK; -+ S3C24X0_REG32 NFSTAT; -+ S3C24X0_REG32 NFECCERR0; -+ S3C24X0_REG32 NFECCERR1; -+ S3C24X0_REG32 NFMECC0; -+ S3C24X0_REG32 NFMECC1; -+ S3C24X0_REG32 NFSECC; -+ S3C24X0_REG32 NFMLCBITPT; -+} /*__attribute__((__packed__))*/ S3C2443_NAND; -+ -+/* STATIC MEMORY (see S3C2443 manual chapter 5) */ -+struct s3c2443_sm_bank { -+ S3C24X0_REG32 SMBIDCYR; -+ S3C24X0_REG32 SMBWSTRDR; -+ S3C24X0_REG32 SMBWSTWRR; -+ S3C24X0_REG32 SMBWSTOENR; -+ S3C24X0_REG32 SMBWSTWENR; -+ S3C24X0_REG32 SMBCR; -+ S3C24X0_REG32 SMBSR; -+ S3C24X0_REG32 SMBWSTBRDR; -+}; -+ -+typedef struct { -+ struct s3c2443_sm_bank bank[5]; /* 0x4f000000..0x4f0000bf */ -+ S3C24X0_REG32 res[0x40]; /* 0x4f0000c0..0x4f0000ff */ -+ S3C24X0_REG32 SMBONETYPER; -+ S3C24X0_REG32 SMCSR; -+ S3C24X0_REG32 SMCCR; -+} /*__attribute__((__packed__))*/ S3C2443_SMEM; -+ -+ -+/* MOBILE DRAM (see S3C2443 manual chapter 6) */ -+typedef struct { -+ S3C24X0_REG32 BANKCFG; -+ S3C24X0_REG32 BANKCON1; -+ S3C24X0_REG32 BANKCON2; -+ S3C24X0_REG32 BANKCON3; -+ S3C24X0_REG32 REFRESH; -+ S3C24X0_REG32 TIMEOUT; -+} /*__attribute__((__packed__))*/ S3C2443_MDRAM -+ -+#endif /* __S3C2443_H */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch deleted file mode 100644 index 09392ad2cf..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch +++ /dev/null @@ -1,1481 +0,0 @@ -Add support for the Samsung SMDK2440 development board - -Index: u-boot/Makefile -=================================================================== ---- u-boot.orig/Makefile -+++ u-boot/Makefile -@@ -2035,6 +2035,9 @@ - smdk2410_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 - -+smdk2440_config : unconfig -+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2440 NULL s3c24x0 -+ - SX1_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t sx1 - -Index: u-boot/include/configs/smdk2440.h -=================================================================== ---- /dev/null -+++ u-boot/include/configs/smdk2440.h -@@ -0,0 +1,296 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * Gary Jennejohn <gj@denx.de> -+ * David Mueller <d.mueller@elsoft.ch> -+ * -+ * Configuation settings for the SAMSUNG SMDK2440 board. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#if 0 -+/* If we want to start u-boot from usb bootloader in NOR flash */ -+#define CONFIG_SKIP_RELOCATE_UBOOT 1 -+#define CONFIG_SKIP_LOWLEVEL_INIT 1 -+#else -+/* If we want to start u-boot directly from within NAND flash */ -+#define CONFIG_LL_INIT_NAND_ONLY -+#define CONFIG_S3C2410_NAND_BOOT 1 -+#define CONFIG_S3C2410_NAND_SKIP_BAD 1 -+#endif -+ -+#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2440 SoC */ -+#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2440 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 16934400/* SMDK2440 has 16.9344MHz input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 2048*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -+#define CS8900_BASE 0x19000300 -+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2440 */ -+#define CONFIG_HWFLOW 1 -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS \ -+ (CONFIG_CMD_DFL | \ -+ /*CFG_CMD_BSP | */ \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_DATE | \ -+ /*CFG_CMD_DHCP | */ \ -+ CFG_CMD_DIAG | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_EXT2 | \ -+ CFG_CMD_FAT | \ -+ /*CFG_CMD_HWFLOW | */ \ -+ /* CFG_CMD_IDE | */ \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PING | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_USB) -+ -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 console=ttySAC2,115200 loglevel=8" -+#define CONFIG_ETHADDR 00:0c:20:02:0a:5b -+#define CONFIG_NETMASK 255.255.255.0 -+#define CONFIG_IPADDR 192.168.1.100 -+#define CONFIG_SERVERIP 192.168.1.21 -+/*#define CONFIG_BOOTFILE "elinos-lart" */ -+//#define CONFIG_BOOTCOMMAND "nand read 0x32000000 0x34000 0x200000; bootm" -+#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x100000 0x200000; bootm" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#define CFG_PROMPT "SMDK2440 # " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 32 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x32000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (512*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+/* IDE/ATA config */ -+ -+#if 0 -+#define CFG_IDE_MAXBUS 1 -+#define CFG_IDE_MAXDEVICE 2 -+#define CFG_IDE_PREINIT 0 -+ -+#define CFG_ATA_BASE_ADDR -+#endif -+ -+#define CONFIG_USB_OHCI 1 -+ -+#define CONFIG_USB_DEVICE 1 -+#define CONFIG_USB_TTY 1 -+#define CFG_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_USBD_VENDORID 0x1457 /* FIC */ -+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ -+#define CONFIG_USBD_PRODUCTID_CDCACM 0x511b /* SMDK2440 CDC ACM */ -+#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc." -+#define CONFIG_USBD_PRODUCT_NAME "S3C2440 Bootloader " U_BOOT_VERSION -+#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" -+#define CONFIG_USBD_DFU 1 -+#define CONFIG_USBD_DFU_XFER_SIZE 4096 -+#define CONFIG_USBD_DFU_INTERFACE 2 -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+ -+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -+ -+#define CFG_FLASH_BASE PHYS_FLASH_1 -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -+#if 0 -+#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -+#endif -+ -+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -+#ifdef CONFIG_AMD_LV800 -+#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -+#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ -+#endif -+#ifdef CONFIG_AMD_LV400 -+#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -+#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ -+#endif -+ -+/* timeout values are in ticks */ -+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x20000 /* 128k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET_OOB 1 -+#define CFG_PREBOOT_OVERRIDE 1 -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+#define CONFIG_EXT2 1 -+ -+#define CONFIG_NEW_QT2440 0 -+ -+/* FAT driver in u-boot is broken currently */ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT -+ -+#if 1 -+/* JFFS2 driver */ -+#define CONFIG_JFFS2_CMDLINE 1 -+#define CONFIG_JFFS2_NAND 1 -+#define CONFIG_JFFS2_NAND_DEV 0 -+//#define CONFIG_JFFS2_NAND_OFF 0x634000 -+//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+#endif -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#endif -+ -+ -+#if 0 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#define CONFIG_S3C2410_NAND_BBT 1 -+//#define CONFIG_S3C2410_NAND_HWECC 1 -+ -+#define CFG_NAND_YAFFS_WRITE -+#define CFG_NAND_YAFFS1_NEW_OOB_LAYOUT -+ -+#define MTDIDS_DEFAULT "nand0=smdk2440-nand" -+#define MTPARTS_DEFAULT "smdk2440-nand:0x00100000(u-boot),0x00200000(kernel),0x00200000(update),0x00100000(splash),0x01400000(jffs2),-(temp)" -+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "smdk2440-nand" -+#define CONFIG_NAND_DYNPART -+ -+#endif /* __CONFIG_H */ -Index: u-boot/include/configs/smdk2440nand.h -=================================================================== ---- /dev/null -+++ u-boot/include/configs/smdk2440nand.h -@@ -0,0 +1,47 @@ -+/* -+ * (C) Copyright 2004 -+ * Samsung Electronics : SW.LEE <hitchcar@samsung.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ */ -+ -+#ifndef __SMDK2440_NAND_H -+#define __SMDK2440_NAND_H -+ -+#define CFG_ENV_NAND_BLOCK 8 -+ -+#if 0 //old flash -+#define NAND_OOB_SIZE (16) -+#define NAND_PAGES_IN_BLOCK (32) -+#define NAND_PAGE_SIZE (512) -+ -+#define NAND_BLOCK_SIZE (NAND_PAGE_SIZE*NAND_PAGES_IN_BLOCK) -+#define NAND_BLOCK_MASK (NAND_BLOCK_SIZE - 1) -+#define NAND_PAGE_MASK (NAND_PAGE_SIZE - 1) -+#else //new flash -+#define NAND_OOB_SIZE (64) -+#define NAND_PAGES_IN_BLOCK (64) -+#define NAND_PAGE_SIZE (2048) -+ -+#define NAND_BLOCK_SIZE (NAND_PAGE_SIZE*NAND_PAGES_IN_BLOCK) -+#define NAND_BLOCK_MASK (NAND_BLOCK_SIZE - 1) -+#define NAND_PAGE_MASK (NAND_PAGE_SIZE - 1) -+ -+#endif -+ -+ -+ -+//#define NAND_3_ADDR_CYCLE 1 -+//#define S3C24X0_16BIT_NAND 1 -+ -+#ifdef KINGFISH -+#undef S3C24X0_16BIT_NAND -+#define S3C24X0_16BIT_NAND 1 -+#endif -+ -+#endif -+ -Index: u-boot/board/smdk2440/Makefile -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/Makefile -@@ -0,0 +1,67 @@ -+# -+# (C) Copyright 2000-2006 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).a -+ -+COBJS := smdk2440.o flash.o udc.o -+SOBJS := lowlevel_init.o -+ -+.PHONY: all -+ -+all: $(LIB) lowlevel_foo.bin -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -+ -+lowlevel_foo.o: lowlevel_foo.S -+ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ -+ -o lowlevel_foo.o lowlevel_foo.S -+ -+lowlevel_foo: lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds -+ $(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ -+ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo -+ -+lowlevel_foo.bin: lowlevel_foo -+ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ -+ lowlevel_foo lowlevel_foo.bin -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### -Index: u-boot/board/smdk2440/config.mk -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/config.mk -@@ -0,0 +1,29 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# SAMSUNG SMDK2440 board with S3C2440 (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+CONFIG_USB_DFU_VENDOR=0x1457 -+CONFIG_USB_DFU_PRODUCT=0x511b -+CONFIG_USB_DFU_REVISION=0x0100 -+ -+# -+# SMDK2440 has 1 bank of 64 MB DRAM -+# -+# 3000'0000 to 3400'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# we load ourself to 33F8'0000 -+# -+# download area is 3300'0000 -+# -+ -+ -+TEXT_BASE = 0x33F80000 -Index: u-boot/board/smdk2440/flash.c -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/flash.c -@@ -0,0 +1,433 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Alex Zuepke <azu@sysgo.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+ulong myflush (void); -+ -+ -+#define FLASH_BANK_SIZE PHYS_FLASH_SIZE -+#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ -+ -+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -+ -+ -+#define CMD_READ_ARRAY 0x000000F0 -+#define CMD_UNLOCK1 0x000000AA -+#define CMD_UNLOCK2 0x00000055 -+#define CMD_ERASE_SETUP 0x00000080 -+#define CMD_ERASE_CONFIRM 0x00000030 -+#define CMD_PROGRAM 0x000000A0 -+#define CMD_UNLOCK_BYPASS 0x00000020 -+ -+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) -+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) -+ -+#define BIT_ERASE_DONE 0x00000080 -+#define BIT_RDY_MASK 0x00000080 -+#define BIT_PROGRAM_ERROR 0x00000020 -+#define BIT_TIMEOUT 0x80000000 /* our flag */ -+ -+#define READY 1 -+#define ERR 2 -+#define TMO 4 -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+ulong flash_init (void) -+{ -+ int i, j; -+ ulong size = 0; -+ -+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { -+ ulong flashbase = 0; -+ -+ flash_info[i].flash_id = -+#if defined(CONFIG_AMD_LV400) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV400B & FLASH_TYPEMASK); -+#elif defined(CONFIG_AMD_LV800) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV800B & FLASH_TYPEMASK); -+#else -+#error "Unknown flash configured" -+#endif -+ flash_info[i].size = FLASH_BANK_SIZE; -+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; -+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); -+ if (i == 0) -+ flashbase = PHYS_FLASH_1; -+ else -+ panic ("configured too many flash banks!\n"); -+ for (j = 0; j < flash_info[i].sector_count; j++) { -+ if (j <= 3) { -+ /* 1st one is 16 KB */ -+ if (j == 0) { -+ flash_info[i].start[j] = -+ flashbase + 0; -+ } -+ -+ /* 2nd and 3rd are both 8 KB */ -+ if ((j == 1) || (j == 2)) { -+ flash_info[i].start[j] = -+ flashbase + 0x4000 + (j - -+ 1) * -+ 0x2000; -+ } -+ -+ /* 4th 32 KB */ -+ if (j == 3) { -+ flash_info[i].start[j] = -+ flashbase + 0x8000; -+ } -+ } else { -+ flash_info[i].start[j] = -+ flashbase + (j - 3) * MAIN_SECT_SIZE; -+ } -+ } -+ size += flash_info[i].size; -+ } -+ -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_FLASH_BASE, -+ CFG_FLASH_BASE + monitor_flash_len - 1, -+ &flash_info[0]); -+ -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_ENV_ADDR, -+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); -+ -+ return size; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+void flash_print_info (flash_info_t * info) -+{ -+ int i; -+ -+ switch (info->flash_id & FLASH_VENDMASK) { -+ case (AMD_MANUFACT & FLASH_VENDMASK): -+ printf ("AMD: "); -+ break; -+ default: -+ printf ("Unknown Vendor "); -+ break; -+ } -+ -+ switch (info->flash_id & FLASH_TYPEMASK) { -+ case (AMD_ID_LV400B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV400BB (4Mbit)\n"); -+ break; -+ case (AMD_ID_LV800B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV800BB (8Mbit)\n"); -+ break; -+ default: -+ printf ("Unknown Chip Type\n"); -+ goto Done; -+ break; -+ } -+ -+ printf (" Size: %ld MB in %d Sectors\n", -+ info->size >> 20, info->sector_count); -+ -+ printf (" Sector Start Addresses:"); -+ for (i = 0; i < info->sector_count; i++) { -+ if ((i % 5) == 0) { -+ printf ("\n "); -+ } -+ printf (" %08lX%s", info->start[i], -+ info->protect[i] ? " (RO)" : " "); -+ } -+ printf ("\n"); -+ -+ Done:; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+int flash_erase (flash_info_t * info, int s_first, int s_last) -+{ -+ ushort result; -+ int iflag, cflag, prot, sect; -+ int rc = ERR_OK; -+ int chip; -+ -+ /* first look for protection bits */ -+ -+ if (info->flash_id == FLASH_UNKNOWN) -+ return ERR_UNKNOWN_FLASH_TYPE; -+ -+ if ((s_first < 0) || (s_first > s_last)) { -+ return ERR_INVAL; -+ } -+ -+ if ((info->flash_id & FLASH_VENDMASK) != -+ (AMD_MANUFACT & FLASH_VENDMASK)) { -+ return ERR_UNKNOWN_FLASH_VENDOR; -+ } -+ -+ prot = 0; -+ for (sect = s_first; sect <= s_last; ++sect) { -+ if (info->protect[sect]) { -+ prot++; -+ } -+ } -+ if (prot) -+ return ERR_PROTECTED; -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ /* Start erase on unprotected sectors */ -+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { -+ printf ("Erasing sector %2d ... ", sect); -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ if (info->protect[sect] == 0) { /* not protected */ -+ vu_short *addr = (vu_short *) (info->start[sect]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ *addr = CMD_ERASE_CONFIRM; -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > -+ CFG_FLASH_ERASE_TOUT) { -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ chip = TMO; -+ break; -+ } -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_ERASE_DONE) -+ chip = READY; -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) -+ chip = ERR; -+ -+ } while (!chip); -+ -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ -+ if (chip == ERR) { -+ rc = ERR_PROG_ERROR; -+ goto outahere; -+ } -+ if (chip == TMO) { -+ rc = ERR_TIMOUT; -+ goto outahere; -+ } -+ -+ printf ("ok.\n"); -+ } else { /* it was protected */ -+ -+ printf ("protected!\n"); -+ } -+ } -+ -+ if (ctrlc ()) -+ printf ("User Interrupt!\n"); -+ -+ outahere: -+ /* allow flash to settle - wait 10 ms */ -+ udelay_masked (10000); -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash -+ */ -+ -+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) -+{ -+ vu_short *addr = (vu_short *) dest; -+ ushort result; -+ int rc = ERR_OK; -+ int cflag, iflag; -+ int chip; -+ -+ /* -+ * Check if Flash is (sufficiently) erased -+ */ -+ result = *addr; -+ if ((result & data) != data) -+ return ERR_NOT_ERASED; -+ -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; -+ *addr = CMD_PROGRAM; -+ *addr = data; -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { -+ chip = ERR | TMO; -+ break; -+ } -+ if (!chip && ((result & 0x80) == (data & 0x80))) -+ chip = READY; -+ -+ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { -+ result = *addr; -+ -+ if ((result & 0x80) == (data & 0x80)) -+ chip = READY; -+ else -+ chip = ERR; -+ } -+ -+ } while (!chip); -+ -+ *addr = CMD_READ_ARRAY; -+ -+ if (chip == ERR || *addr != data) -+ rc = ERR_PROG_ERROR; -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash. -+ */ -+ -+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -+{ -+ ulong cp, wp; -+ int l; -+ int i, rc; -+ ushort data; -+ -+ wp = (addr & ~1); /* get lower word aligned address */ -+ -+ /* -+ * handle unaligned start bytes -+ */ -+ if ((l = addr - wp) != 0) { -+ data = 0; -+ for (i = 0, cp = wp; i < l; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ for (; i < 2 && cnt > 0; ++i) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ ++cp; -+ } -+ for (; cnt == 0 && i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ wp += 2; -+ } -+ -+ /* -+ * handle word aligned part -+ */ -+ while (cnt >= 2) { -+ data = *((vu_short *) src); -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 2; -+ wp += 2; -+ cnt -= 2; -+ } -+ -+ if (cnt == 0) { -+ return ERR_OK; -+ } -+ -+ /* -+ * handle unaligned tail bytes -+ */ -+ data = 0; -+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ } -+ for (; i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ return write_hword (info, wp, data); -+} -Index: u-boot/board/smdk2440/lowlevel_init.S -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/lowlevel_init.S -@@ -0,0 +1,167 @@ -+/* -+ * Memory Setup stuff - taken from blob memsetup.S -+ * -+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and -+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) -+ * -+ * Modified for the Samsung SMDK2410 by -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 -+#define B6_SCAN 0x1 /* 9bit */ -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x1 /* 9bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x0 /* 2clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ ldr r0, =SMRDATA -+ ldr r1, _TEXT_BASE -+ sub r0, r0, r1 -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0x32 -+ .word 0x30 -+ .word 0x30 -Index: u-boot/board/smdk2440/smdk2440.c -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/smdk2440.c -@@ -0,0 +1,152 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Marius Groeger <mgroeger@sysgo.de> -+ * -+ * (C) Copyright 2002 -+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2440.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#define FCLK_SPEED 1 -+ -+#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ -+#define M_MDIV 0xC3 -+#define M_PDIV 0x4 -+#define M_SDIV 0x1 -+#elif FCLK_SPEED==1 /* Fout = 399.65MHz */ -+#define M_MDIV 0x6e -+#define M_PDIV 0x3 -+#define M_SDIV 0x1 -+#endif -+ -+#define USB_CLOCK 1 -+ -+#if USB_CLOCK==0 -+#define U_M_MDIV 0xA1 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x1 -+#elif USB_CLOCK==1 -+#define U_M_MDIV 0x3c -+#define U_M_PDIV 0x4 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x007FFFFF; -+ gpio->GPBCON = 0x002a9655; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPCCON = 0xAAAAAAAA; -+ gpio->GPCUP = 0x0000FFFF; -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ gpio->GPFCON = 0x000055AA; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPGCON = 0xFD95FFBA; -+ gpio->GPGUP = 0x0000FFFF; -+#ifdef CONFIG_SERIAL3 -+ gpio->GPHCON = 0x002AAAAA; -+#else -+ gpio->GPHCON = 0x002AFAAA; -+#endif -+ gpio->GPHUP = 0x000007FF; -+ -+ gpio->GPJCON = 0x2AAAAAA; -+ -+#if 0 -+ /* USB Device Part */ -+ /*GPGCON is reset for USB Device */ -+ gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */ -+ gpio->GPGUP = gpio->GPGUP | ( 1 << 12); /* Pull up disable */ -+ -+ gpio->GPGDAT |= ( 1 << 12) ; -+ gpio->GPGDAT &= ~( 1 << 12) ; -+ udelay(20000); -+ gpio->GPGDAT |= ( 1 << 12) ; -+#endif -+ -+ /* arch number of SMDK2440-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_S3C2440; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -+ -+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. -+ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 -+ images: 640*480*2*2 = 1228800 < 1245184. */ -+ -+unsigned int dynpart_size[] = { -+ CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; -+char *dynpart_names[] = { -+ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; -+ -+ -Index: u-boot/board/smdk2440/u-boot.lds -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/u-boot.lds -@@ -0,0 +1,58 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ cpu/arm920t/s3c24x0/nand_read.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/board/smdk2440/udc.c -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/udc.c -@@ -0,0 +1,23 @@ -+ -+#include <common.h> -+#include <usbdcore.h> -+#include <s3c2440.h> -+ -+void udc_ctrl(enum usbd_event event, int param) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ switch (event) { -+ case UDC_CTRL_PULLUP_ENABLE: -+ if (param) -+ gpio->GPGDAT |= (1 << 12); -+ else -+ gpio->GPGDAT &= ~(1 << 12); -+ break; -+ case UDC_CTRL_500mA_ENABLE: -+ /* IGNORE */ -+ break; -+ default: -+ break; -+ } -+} -Index: u-boot/board/smdk2440/lowlevel_foo.S -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/lowlevel_foo.S -@@ -0,0 +1,82 @@ -+ -+_start: -+ b reset -+undefvec: -+ b undefvec -+swivec: -+ b swivec -+pabtvec: -+ b pabtvec -+dabtvec: -+ b dabtvec -+rsvdvec: -+ b rsvdvec -+irqvec: -+ b irqvec -+fiqvec: -+ b fiqvec -+ -+reset: -+ /* -+ * set the cpu to SVC32 mode -+ */ -+ mrs r0,cpsr -+ bic r0,r0,#0x1f -+ orr r0,r0,#0xd3 -+ msr cpsr,r0 -+ -+/* turn off the watchdog */ -+#define pWTCON 0x53000000 -+#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ -+#define INTSUBMSK 0x4A00001C -+#define CLKDIVN 0x4C000014 /* clock divisor register */ -+ -+ ldr r0, =pWTCON -+ mov r1, #0x0 -+ str r1, [r0] -+ -+ mov r1, #0xffffffff -+ ldr r0, =INTMSK -+ str r1, [r0] -+ ldr r1, =0x3ff -+ ldr r0, =INTSUBMSK -+ str r1, [r0] -+ -+ /* FCLK:HCLK:PCLK = 1:2:4 */ -+ /* default FCLK is 120 MHz ! */ -+ ldr r0, =CLKDIVN -+ mov r1, #3 -+ str r1, [r0] -+ -+ bl cpu_init_crit -+ ldr r0,=TEXT_BASE -+ mov pc, r0 -+ -+cpu_init_crit: -+ /* -+ * flush v4 I/D caches -+ */ -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ -+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ -+ -+ /* -+ * disable MMU stuff and caches -+ */ -+ mrc p15, 0, r0, c1, c0, 0 -+ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) -+ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) -+ orr r0, r0, #0x00000002 @ set bit 2 (A) Align -+ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache -+ mcr p15, 0, r0, c1, c0, 0 -+ -+ /* -+ * before relocating, we have to setup RAM timing -+ * because memory timing is board-dependend, you will -+ * find a lowlevel_init.S in your board directory. -+ */ -+ mov ip, lr -+ bl lowlevel_init -+ mov lr, ip -+ mov pc, lr -+ -Index: u-boot/board/smdk2440/lowlevel_foo.lds -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2440/lowlevel_foo.lds -@@ -0,0 +1,56 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ lowlevel_foo.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2443.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2443.patch deleted file mode 100644 index 5757cc078b..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2443.patch +++ /dev/null @@ -1,1411 +0,0 @@ -Index: u-boot/Makefile -=================================================================== ---- u-boot.orig/Makefile -+++ u-boot/Makefile -@@ -2045,6 +2045,9 @@ - smdk2440_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2440 NULL s3c24x0 - -+smdk2443_config : unconfig -+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2443 NULL s3c24x0 -+ - SX1_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t sx1 - -Index: u-boot/board/smdk2443/Makefile -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/Makefile -@@ -0,0 +1,67 @@ -+# -+# (C) Copyright 2000-2006 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).a -+ -+COBJS := smdk2443.o flash.o udc.o -+SOBJS := lowlevel_init.o -+ -+.PHONY: all -+ -+all: $(LIB) lowlevel_foo.bin -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -+ -+lowlevel_foo.o: lowlevel_foo.S -+ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ -+ -o lowlevel_foo.o lowlevel_foo.S -+ -+lowlevel_foo: lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds -+ $(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ -+ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo -+ -+lowlevel_foo.bin: lowlevel_foo -+ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ -+ lowlevel_foo lowlevel_foo.bin -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### -Index: u-boot/board/smdk2443/smdk2443.c -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/smdk2443.c -@@ -0,0 +1,147 @@ -+/* -+ * (C) Copyright 2006 OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+#include <s3c2440.h> -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#define FCLK_SPEED 1 -+ -+#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ -+#define M_MDIV 0xC3 -+#define M_PDIV 0x4 -+#define M_SDIV 0x1 -+#elif FCLK_SPEED==1 /* Fout = 399.65MHz */ -+#define M_MDIV 0x6e -+#define M_PDIV 0x3 -+#define M_SDIV 0x1 -+#endif -+ -+#define USB_CLOCK 1 -+ -+#if USB_CLOCK==0 -+#define U_M_MDIV 0xA1 -+#define U_M_PDIV 0x3 -+#define U_M_SDIV 0x1 -+#elif USB_CLOCK==1 -+#define U_M_MDIV 0x3c -+#define U_M_PDIV 0x4 -+#define U_M_SDIV 0x2 -+#endif -+ -+static inline void delay (unsigned long loops) -+{ -+ __asm__ volatile ("1:\n" -+ "subs %0, %1, #1\n" -+ "bne 1b":"=r" (loops):"0" (loops)); -+} -+ -+/* -+ * Miscellaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ /* to reduce PLL lock time, adjust the LOCKTIME register */ -+ clk_power->LOCKTIME = 0xFFFFFF; -+ -+ /* configure MPLL */ -+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (4000); -+ -+ /* configure UPLL */ -+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); -+ -+ /* some delay between MPLL and UPLL */ -+ delay (8000); -+ -+ /* set up the I/O ports */ -+ gpio->GPACON = 0x007FFFFF; -+ gpio->GPBCON = 0x00044555; -+ gpio->GPBUP = 0x000007FF; -+ gpio->GPCCON = 0xAAAAAAAA; -+ gpio->GPCUP = 0x0000FFFF; -+ gpio->GPDCON = 0xAAAAAAAA; -+ gpio->GPDUP = 0x0000FFFF; -+ gpio->GPECON = 0xAAAAAAAA; -+ gpio->GPEUP = 0x0000FFFF; -+ gpio->GPFCON = 0x000055AA; -+ gpio->GPFUP = 0x000000FF; -+ gpio->GPGCON = 0xFD95FFBA; -+ gpio->GPGUP = 0x0000FFFF; -+#ifdef CONFIG_SERIAL3 -+ gpio->GPHCON = 0x002AAAAA; -+#else -+ gpio->GPHCON = 0x002AFAAA; -+#endif -+ gpio->GPHUP = 0x000007FF; -+ -+#if 0 -+ /* USB Device Part */ -+ /*GPGCON is reset for USB Device */ -+ gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */ -+ gpio->GPGUP = gpio->GPGUP | ( 1 << 12); /* Pull up disable */ -+ -+ gpio->GPGDAT |= ( 1 << 12) ; -+ gpio->GPGDAT &= ~( 1 << 12) ; -+ udelay(20000); -+ gpio->GPGDAT |= ( 1 << 12) ; -+#endif -+ -+ /* arch number of SMDK2440-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_S3C2440; -+ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = 0x30000100; -+ -+ icache_enable(); -+ dcache_enable(); -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -+ -+ return 0; -+} -+ -+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. -+ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 -+ images: 640*480*2*2 = 1228800 < 1245184. */ -+ -+unsigned int dynpart_size[] = { -+ CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; -+ -+char *dynpart_names[] = { -+ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; -+ -+ -Index: u-boot/board/smdk2443/u-boot.lds -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/u-boot.lds -@@ -0,0 +1,58 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ cpu/arm920t/s3c24x0/nand_read.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/include/configs/smdk2443.h -=================================================================== ---- /dev/null -+++ u-boot/include/configs/smdk2443.h -@@ -0,0 +1,289 @@ -+/* -+ * (C) Copyright 2007 OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * Configuation settings for the SAMSUNG SMDK2443 board. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#if 0 -+/* If we want to start u-boot from usb bootloader in NOR flash */ -+#define CONFIG_SKIP_RELOCATE_UBOOT 1 -+#define CONFIG_SKIP_LOWLEVEL_INIT 1 -+#else -+/* If we want to start u-boot directly from within NAND flash */ -+#define CONFIG_LL_INIT_NAND_ONLY -+#define CONFIG_S3C2410_NAND_BOOT 1 -+#define CONFIG_S3C2410_NAND_SKIP_BAD 1 -+#endif -+ -+#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ -+ -+/* -+ * High Level Configuration Options -+ * (easy to change) -+ */ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2440 SoC */ -+#define CONFIG_SMDK2443 1 /* on a SAMSUNG SMDK2440 Board */ -+ -+/* input clock of PLL */ -+#define CONFIG_SYS_CLK_FREQ 16934400/* SMDK2440 has 16.9344MHz input clock */ -+ -+ -+#define USE_920T_MMU 1 -+#define CONFIG_USE_IRQ 1 -+ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 2048*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+/* -+ * Hardware drivers -+ */ -+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -+#define CS8900_BASE 0x19000300 -+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ -+ -+/* -+ * select serial console configuration -+ */ -+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2440 */ -+#define CONFIG_HWFLOW 1 -+ -+/************************************************************ -+ * RTC -+ ************************************************************/ -+#define CONFIG_RTC_S3C24X0 1 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/*********************************************************** -+ * Command definition -+ ***********************************************************/ -+#define CONFIG_COMMANDS \ -+ (CONFIG_CMD_DFL | \ -+ /*CFG_CMD_BSP | */ \ -+ CFG_CMD_CACHE | \ -+ CFG_CMD_DATE | \ -+ /*CFG_CMD_DHCP | */ \ -+ CFG_CMD_DIAG | \ -+ CFG_CMD_ELF | \ -+ CFG_CMD_EXT2 | \ -+ CFG_CMD_FAT | \ -+ /*CFG_CMD_HWFLOW | */ \ -+ /* CFG_CMD_IDE | */ \ -+ /* CFG_CMD_IRQ | */ \ -+ CFG_CMD_JFFS2 | \ -+ CFG_CMD_MMC | \ -+ CFG_CMD_NAND | \ -+ CFG_CMD_PING | \ -+ CFG_CMD_PORTIO | \ -+ CFG_CMD_REGINFO | \ -+ CFG_CMD_SAVES | \ -+ CFG_CMD_LICENSE | \ -+ CFG_CMD_USB) -+ -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include <cmd_confdefs.h> -+ -+#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 console=ttySAC2,115200 loglevel=8" -+#define CONFIG_ETHADDR 00:0c:20:02:0a:5b -+#define CONFIG_NETMASK 255.255.255.0 -+#define CONFIG_IPADDR 192.168.1.100 -+#define CONFIG_SERVERIP 192.168.1.21 -+#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x100000 0x200000; bootm" -+ -+#define CONFIG_DOS_PARTITION 1 -+ -+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -+/* what's this ? it's not used anywhere */ -+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -+#endif -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CFG_LONGHELP /* undef to save memory */ -+#define CFG_PROMPT "SMDK2443 # " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+#define CFG_MAXARGS 32 /* max number of command args */ -+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -+ -+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -+ -+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -+ -+#define CFG_LOAD_ADDR 0x32000000 /* default load address */ -+ -+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -+/* it to wrap 100 times (total 1562500) to get 1 sec. */ -+#define CFG_HZ 1562500 -+ -+/* valid baudrates */ -+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -+ -+/*----------------------------------------------------------------------- -+ * Stack sizes -+ * -+ * The stack sizes are set up in start.S using the settings below -+ */ -+#define CONFIG_STACKSIZE (512*1024) /* regular stack */ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ -+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -+#endif -+ -+/* IDE/ATA config */ -+ -+#if 0 -+#define CFG_IDE_MAXBUS 1 -+#define CFG_IDE_MAXDEVICE 2 -+#define CFG_IDE_PREINIT 0 -+ -+#define CFG_ATA_BASE_ADDR -+#endif -+ -+#define CONFIG_USB_OHCI 1 -+ -+#define CONFIG_USB_DEVICE 1 -+#define CONFIG_USB_TTY 1 -+#define CFG_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ -+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ -+#define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ -+#define CONFIG_USBD_MANUFACTURER "FiWin" -+#define CONFIG_USBD_PRODUCT_NAME "S3C2443 Bootloader " U_BOOT_VERSION -+#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" -+#define CONFIG_USBD_DFU 1 -+#define CONFIG_USBD_DFU_XFER_SIZE 4096 -+#define CONFIG_USBD_DFU_INTERFACE 2 -+ -+/*----------------------------------------------------------------------- -+ * Physical Memory Map -+ */ -+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -+ -+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -+ -+#define CFG_FLASH_BASE PHYS_FLASH_1 -+ -+/*----------------------------------------------------------------------- -+ * FLASH and environment organization -+ */ -+ -+#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -+#if 0 -+#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -+#endif -+ -+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -+#ifdef CONFIG_AMD_LV800 -+#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -+#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ -+#endif -+#ifdef CONFIG_AMD_LV400 -+#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -+#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ -+#endif -+ -+/* timeout values are in ticks */ -+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ -+ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_SIZE 0x20000 /* 128k Total Size of Environment Sector */ -+#define CFG_ENV_OFFSET_OOB 1 -+#define CFG_PREBOOT_OVERRIDE 1 -+ -+#define NAND_MAX_CHIPS 1 -+#define CFG_NAND_BASE 0x4e000000 -+#define CFG_MAX_NAND_DEVICE 1 -+ -+#define CONFIG_MMC 1 -+#define CFG_MMC_BASE 0xff000000 -+ -+#define CONFIG_EXT2 1 -+ -+/* FAT driver in u-boot is broken currently */ -+#define CONFIG_FAT 1 -+#define CONFIG_SUPPORT_VFAT -+ -+#if 1 -+/* JFFS2 driver */ -+#define CONFIG_JFFS2_CMDLINE 1 -+#define CONFIG_JFFS2_NAND 1 -+#define CONFIG_JFFS2_NAND_DEV 0 -+//#define CONFIG_JFFS2_NAND_OFF 0x634000 -+//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -+#endif -+ -+/* ATAG configuration */ -+#define CONFIG_INITRD_TAG 1 -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_CMDLINE_TAG 1 -+#if 0 -+#define CONFIG_SERIAL_TAG 1 -+#define CONFIG_REVISION_TAG 1 -+#endif -+ -+ -+#if 0 -+#define CONFIG_VIDEO -+#define CONFIG_VIDEO_S3C2410 -+#define CONFIG_CFB_CONSOLE -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_VGA_AS_SINGLE_DEVICE -+ -+#define VIDEO_KBD_INIT_FCT 0 -+#define VIDEO_TSTC_FCT serial_tstc -+#define VIDEO_GETC_FCT serial_getc -+ -+#define LCD_VIDEO_ADDR 0x33d00000 -+#endif -+ -+#define CONFIG_S3C2410_NAND_BBT 1 -+//#define CONFIG_S3C2410_NAND_HWECC 1 -+ -+#define CFG_NAND_YAFFS_WRITE -+#define CFG_NAND_YAFFS1_NEW_OOB_LAYOUT -+ -+#define MTDIDS_DEFAULT "nand0=smdk2443-nand" -+#define MTPARTS_DEFAULT "smdk2443-nand:0x00100000(u-boot),0x00200000(kernel),0x00200000(update),0x00100000(splash),0x01400000(jffs2),-(temp)" -+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "smdk2443-nand" -+#define CONFIG_NAND_DYNPART -+ -+#endif /* __CONFIG_H */ -Index: u-boot/board/smdk2443/lowlevel_foo.S -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/lowlevel_foo.S -@@ -0,0 +1,82 @@ -+ -+_start: -+ b reset -+undefvec: -+ b undefvec -+swivec: -+ b swivec -+pabtvec: -+ b pabtvec -+dabtvec: -+ b dabtvec -+rsvdvec: -+ b rsvdvec -+irqvec: -+ b irqvec -+fiqvec: -+ b fiqvec -+ -+reset: -+ /* -+ * set the cpu to SVC32 mode -+ */ -+ mrs r0,cpsr -+ bic r0,r0,#0x1f -+ orr r0,r0,#0xd3 -+ msr cpsr,r0 -+ -+/* turn off the watchdog */ -+#define pWTCON 0x53000000 -+#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ -+#define INTSUBMSK 0x4A00001C -+#define CLKDIVN 0x4C000014 /* clock divisor register */ -+ -+ ldr r0, =pWTCON -+ mov r1, #0x0 -+ str r1, [r0] -+ -+ mov r1, #0xffffffff -+ ldr r0, =INTMSK -+ str r1, [r0] -+ ldr r1, =0x3ff -+ ldr r0, =INTSUBMSK -+ str r1, [r0] -+ -+ /* FCLK:HCLK:PCLK = 1:2:4 */ -+ /* default FCLK is 120 MHz ! */ -+ ldr r0, =CLKDIVN -+ mov r1, #3 -+ str r1, [r0] -+ -+ bl cpu_init_crit -+ ldr r0,=TEXT_BASE -+ mov pc, r0 -+ -+cpu_init_crit: -+ /* -+ * flush v4 I/D caches -+ */ -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ -+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ -+ -+ /* -+ * disable MMU stuff and caches -+ */ -+ mrc p15, 0, r0, c1, c0, 0 -+ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) -+ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) -+ orr r0, r0, #0x00000002 @ set bit 2 (A) Align -+ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache -+ mcr p15, 0, r0, c1, c0, 0 -+ -+ /* -+ * before relocating, we have to setup RAM timing -+ * because memory timing is board-dependend, you will -+ * find a lowlevel_init.S in your board directory. -+ */ -+ mov ip, lr -+ bl lowlevel_init -+ mov lr, ip -+ mov pc, lr -+ -Index: u-boot/board/smdk2443/lowlevel_init.S -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/lowlevel_init.S -@@ -0,0 +1,163 @@ -+/* -+ * SMDK2443 Memory Setup -+ * -+ * Copyright (C) 2007 by OpenMoko, Inc. -+ * Author: Harald Welte <laforge@openmoko.org> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+ -+#include <config.h> -+#include <version.h> -+ -+ -+/* some parameters for the board */ -+ -+/* -+ * -+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S -+ * -+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> -+ * -+ */ -+ -+#define BWSCON 0x48000000 -+ -+/* BWSCON */ -+#define DW8 (0x0) -+#define DW16 (0x1) -+#define DW32 (0x2) -+#define WAIT (0x1<<2) -+#define UBLB (0x1<<3) -+ -+#define B1_BWSCON (DW32) -+#define B2_BWSCON (DW16) -+#define B3_BWSCON (DW16 + WAIT + UBLB) -+#define B4_BWSCON (DW16) -+#define B5_BWSCON (DW16) -+#define B6_BWSCON (DW32) -+#define B7_BWSCON (DW32) -+ -+/* BANK0CON */ -+#define B0_Tacs 0x0 /* 0clk */ -+#define B0_Tcos 0x0 /* 0clk */ -+#define B0_Tacc 0x7 /* 14clk */ -+#define B0_Tcoh 0x0 /* 0clk */ -+#define B0_Tah 0x0 /* 0clk */ -+#define B0_Tacp 0x0 -+#define B0_PMC 0x0 /* normal */ -+ -+/* BANK1CON */ -+#define B1_Tacs 0x0 /* 0clk */ -+#define B1_Tcos 0x0 /* 0clk */ -+#define B1_Tacc 0x7 /* 14clk */ -+#define B1_Tcoh 0x0 /* 0clk */ -+#define B1_Tah 0x0 /* 0clk */ -+#define B1_Tacp 0x0 -+#define B1_PMC 0x0 -+ -+#define B2_Tacs 0x0 -+#define B2_Tcos 0x0 -+#define B2_Tacc 0x7 -+#define B2_Tcoh 0x0 -+#define B2_Tah 0x0 -+#define B2_Tacp 0x0 -+#define B2_PMC 0x0 -+ -+#define B3_Tacs 0x0 /* 0clk */ -+#define B3_Tcos 0x3 /* 4clk */ -+#define B3_Tacc 0x7 /* 14clk */ -+#define B3_Tcoh 0x1 /* 1clk */ -+#define B3_Tah 0x0 /* 0clk */ -+#define B3_Tacp 0x3 /* 6clk */ -+#define B3_PMC 0x0 /* normal */ -+ -+#define B4_Tacs 0x0 /* 0clk */ -+#define B4_Tcos 0x0 /* 0clk */ -+#define B4_Tacc 0x7 /* 14clk */ -+#define B4_Tcoh 0x0 /* 0clk */ -+#define B4_Tah 0x0 /* 0clk */ -+#define B4_Tacp 0x0 -+#define B4_PMC 0x0 /* normal */ -+ -+#define B5_Tacs 0x0 /* 0clk */ -+#define B5_Tcos 0x0 /* 0clk */ -+#define B5_Tacc 0x7 /* 14clk */ -+#define B5_Tcoh 0x0 /* 0clk */ -+#define B5_Tah 0x0 /* 0clk */ -+#define B5_Tacp 0x0 -+#define B5_PMC 0x0 /* normal */ -+ -+#define B6_MT 0x3 /* SDRAM */ -+#define B6_Trcd 0x1 -+#define B6_SCAN 0x1 /* 9bit */ -+ -+#define B7_MT 0x3 /* SDRAM */ -+#define B7_Trcd 0x1 /* 3clk */ -+#define B7_SCAN 0x1 /* 9bit */ -+ -+/* REFRESH parameter */ -+#define REFEN 0x1 /* Refresh enable */ -+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -+#define Trp 0x0 /* 2clk */ -+#define Trc 0x3 /* 7clk */ -+#define Tchr 0x2 /* 3clk */ -+#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ -+/**************************************/ -+ -+_TEXT_BASE: -+ .word TEXT_BASE -+ -+.globl lowlevel_init -+lowlevel_init: -+ /* memory control configuration */ -+ /* make r0 relative the current location so that it */ -+ /* reads SMRDATA out of FLASH rather than memory ! */ -+ ldr r0, =SMRDATA -+ ldr r1, _TEXT_BASE -+ sub r0, r0, r1 -+ ldr r1, =BWSCON /* Bus Width Status Controller */ -+ add r2, r0, #13*4 -+0: -+ ldr r3, [r0], #4 -+ str r3, [r1], #4 -+ cmp r2, r0 -+ bne 0b -+ -+ /* everything is fine now */ -+ mov pc, lr -+ -+ .ltorg -+/* the literal pools origin */ -+ -+SMRDATA: -+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) -+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) -+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) -+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) -+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) -+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) -+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) -+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) -+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) -+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) -+ .word 0x32 -+ .word 0x30 -+ .word 0x30 -Index: u-boot/board/smdk2443/config.mk -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/config.mk -@@ -0,0 +1,29 @@ -+# -+# (C) Copyright 2002 -+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -+# -+# SAMSUNG SMDK2443 board with S3C2443 (ARM920T) cpu -+# -+# see http://www.samsung.com/ for more information on SAMSUNG -+# -+ -+CONFIG_USB_DFU_VENDOR=0x1457 -+CONFIG_USB_DFU_PRODUCT=0x511c -+CONFIG_USB_DFU_REVISION=0x0100 -+ -+# -+# SMDK2443 has 1 bank of 64 MB DRAM -+# -+# 3000'0000 to 3400'0000 -+# -+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -+# optionally with a ramdisk at 3080'0000 -+# -+# we load ourself to 33F8'0000 -+# -+# download area is 3300'0000 -+# -+ -+ -+TEXT_BASE = 0x33F80000 -Index: u-boot/board/smdk2443/lowlevel_foo.lds -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/lowlevel_foo.lds -@@ -0,0 +1,56 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ lowlevel_foo.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -Index: u-boot/board/smdk2443/flash.c -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/flash.c -@@ -0,0 +1,433 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> -+ * Alex Zuepke <azu@sysgo.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include <common.h> -+ -+ulong myflush (void); -+ -+ -+#define FLASH_BANK_SIZE PHYS_FLASH_SIZE -+#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ -+ -+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -+ -+ -+#define CMD_READ_ARRAY 0x000000F0 -+#define CMD_UNLOCK1 0x000000AA -+#define CMD_UNLOCK2 0x00000055 -+#define CMD_ERASE_SETUP 0x00000080 -+#define CMD_ERASE_CONFIRM 0x00000030 -+#define CMD_PROGRAM 0x000000A0 -+#define CMD_UNLOCK_BYPASS 0x00000020 -+ -+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) -+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) -+ -+#define BIT_ERASE_DONE 0x00000080 -+#define BIT_RDY_MASK 0x00000080 -+#define BIT_PROGRAM_ERROR 0x00000020 -+#define BIT_TIMEOUT 0x80000000 /* our flag */ -+ -+#define READY 1 -+#define ERR 2 -+#define TMO 4 -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+ulong flash_init (void) -+{ -+ int i, j; -+ ulong size = 0; -+ -+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { -+ ulong flashbase = 0; -+ -+ flash_info[i].flash_id = -+#if defined(CONFIG_AMD_LV400) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV400B & FLASH_TYPEMASK); -+#elif defined(CONFIG_AMD_LV800) -+ (AMD_MANUFACT & FLASH_VENDMASK) | -+ (AMD_ID_LV800B & FLASH_TYPEMASK); -+#else -+#error "Unknown flash configured" -+#endif -+ flash_info[i].size = FLASH_BANK_SIZE; -+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; -+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); -+ if (i == 0) -+ flashbase = PHYS_FLASH_1; -+ else -+ panic ("configured too many flash banks!\n"); -+ for (j = 0; j < flash_info[i].sector_count; j++) { -+ if (j <= 3) { -+ /* 1st one is 16 KB */ -+ if (j == 0) { -+ flash_info[i].start[j] = -+ flashbase + 0; -+ } -+ -+ /* 2nd and 3rd are both 8 KB */ -+ if ((j == 1) || (j == 2)) { -+ flash_info[i].start[j] = -+ flashbase + 0x4000 + (j - -+ 1) * -+ 0x2000; -+ } -+ -+ /* 4th 32 KB */ -+ if (j == 3) { -+ flash_info[i].start[j] = -+ flashbase + 0x8000; -+ } -+ } else { -+ flash_info[i].start[j] = -+ flashbase + (j - 3) * MAIN_SECT_SIZE; -+ } -+ } -+ size += flash_info[i].size; -+ } -+ -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_FLASH_BASE, -+ CFG_FLASH_BASE + monitor_flash_len - 1, -+ &flash_info[0]); -+ -+ flash_protect (FLAG_PROTECT_SET, -+ CFG_ENV_ADDR, -+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); -+ -+ return size; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+void flash_print_info (flash_info_t * info) -+{ -+ int i; -+ -+ switch (info->flash_id & FLASH_VENDMASK) { -+ case (AMD_MANUFACT & FLASH_VENDMASK): -+ printf ("AMD: "); -+ break; -+ default: -+ printf ("Unknown Vendor "); -+ break; -+ } -+ -+ switch (info->flash_id & FLASH_TYPEMASK) { -+ case (AMD_ID_LV400B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV400BB (4Mbit)\n"); -+ break; -+ case (AMD_ID_LV800B & FLASH_TYPEMASK): -+ printf ("1x Amd29LV800BB (8Mbit)\n"); -+ break; -+ default: -+ printf ("Unknown Chip Type\n"); -+ goto Done; -+ break; -+ } -+ -+ printf (" Size: %ld MB in %d Sectors\n", -+ info->size >> 20, info->sector_count); -+ -+ printf (" Sector Start Addresses:"); -+ for (i = 0; i < info->sector_count; i++) { -+ if ((i % 5) == 0) { -+ printf ("\n "); -+ } -+ printf (" %08lX%s", info->start[i], -+ info->protect[i] ? " (RO)" : " "); -+ } -+ printf ("\n"); -+ -+ Done:; -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+int flash_erase (flash_info_t * info, int s_first, int s_last) -+{ -+ ushort result; -+ int iflag, cflag, prot, sect; -+ int rc = ERR_OK; -+ int chip; -+ -+ /* first look for protection bits */ -+ -+ if (info->flash_id == FLASH_UNKNOWN) -+ return ERR_UNKNOWN_FLASH_TYPE; -+ -+ if ((s_first < 0) || (s_first > s_last)) { -+ return ERR_INVAL; -+ } -+ -+ if ((info->flash_id & FLASH_VENDMASK) != -+ (AMD_MANUFACT & FLASH_VENDMASK)) { -+ return ERR_UNKNOWN_FLASH_VENDOR; -+ } -+ -+ prot = 0; -+ for (sect = s_first; sect <= s_last; ++sect) { -+ if (info->protect[sect]) { -+ prot++; -+ } -+ } -+ if (prot) -+ return ERR_PROTECTED; -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ /* Start erase on unprotected sectors */ -+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { -+ printf ("Erasing sector %2d ... ", sect); -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ if (info->protect[sect] == 0) { /* not protected */ -+ vu_short *addr = (vu_short *) (info->start[sect]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ *addr = CMD_ERASE_CONFIRM; -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > -+ CFG_FLASH_ERASE_TOUT) { -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ chip = TMO; -+ break; -+ } -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_ERASE_DONE) -+ chip = READY; -+ -+ if (!chip -+ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) -+ chip = ERR; -+ -+ } while (!chip); -+ -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ -+ if (chip == ERR) { -+ rc = ERR_PROG_ERROR; -+ goto outahere; -+ } -+ if (chip == TMO) { -+ rc = ERR_TIMOUT; -+ goto outahere; -+ } -+ -+ printf ("ok.\n"); -+ } else { /* it was protected */ -+ -+ printf ("protected!\n"); -+ } -+ } -+ -+ if (ctrlc ()) -+ printf ("User Interrupt!\n"); -+ -+ outahere: -+ /* allow flash to settle - wait 10 ms */ -+ udelay_masked (10000); -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash -+ */ -+ -+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) -+{ -+ vu_short *addr = (vu_short *) dest; -+ ushort result; -+ int rc = ERR_OK; -+ int cflag, iflag; -+ int chip; -+ -+ /* -+ * Check if Flash is (sufficiently) erased -+ */ -+ result = *addr; -+ if ((result & data) != data) -+ return ERR_NOT_ERASED; -+ -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; -+ *addr = CMD_PROGRAM; -+ *addr = data; -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ /* wait until flash is ready */ -+ chip = 0; -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { -+ chip = ERR | TMO; -+ break; -+ } -+ if (!chip && ((result & 0x80) == (data & 0x80))) -+ chip = READY; -+ -+ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { -+ result = *addr; -+ -+ if ((result & 0x80) == (data & 0x80)) -+ chip = READY; -+ else -+ chip = ERR; -+ } -+ -+ } while (!chip); -+ -+ *addr = CMD_READ_ARRAY; -+ -+ if (chip == ERR || *addr != data) -+ rc = ERR_PROG_ERROR; -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash. -+ */ -+ -+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -+{ -+ ulong cp, wp; -+ int l; -+ int i, rc; -+ ushort data; -+ -+ wp = (addr & ~1); /* get lower word aligned address */ -+ -+ /* -+ * handle unaligned start bytes -+ */ -+ if ((l = addr - wp) != 0) { -+ data = 0; -+ for (i = 0, cp = wp; i < l; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ for (; i < 2 && cnt > 0; ++i) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ ++cp; -+ } -+ for (; cnt == 0 && i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ wp += 2; -+ } -+ -+ /* -+ * handle word aligned part -+ */ -+ while (cnt >= 2) { -+ data = *((vu_short *) src); -+ if ((rc = write_hword (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 2; -+ wp += 2; -+ cnt -= 2; -+ } -+ -+ if (cnt == 0) { -+ return ERR_OK; -+ } -+ -+ /* -+ * handle unaligned tail bytes -+ */ -+ data = 0; -+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { -+ data = (data >> 8) | (*src++ << 8); -+ --cnt; -+ } -+ for (; i < 2; ++i, ++cp) { -+ data = (data >> 8) | (*(uchar *) cp << 8); -+ } -+ -+ return write_hword (info, wp, data); -+} -Index: u-boot/board/smdk2443/udc.c -=================================================================== ---- /dev/null -+++ u-boot/board/smdk2443/udc.c -@@ -0,0 +1,23 @@ -+ -+#include <common.h> -+#include <usbdcore.h> -+#include <s3c2440.h> -+ -+void udc_ctrl(enum usbd_event event, int param) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+ switch (event) { -+ case UDC_CTRL_PULLUP_ENABLE: -+ if (param) -+ gpio->GPGDAT |= (1 << 12); -+ else -+ gpio->GPGDAT &= ~(1 << 12); -+ break; -+ case UDC_CTRL_500mA_ENABLE: -+ /* IGNORE */ -+ break; -+ default: -+ break; -+ } -+} diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-strtoul.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-strtoul.patch deleted file mode 100644 index a88e94b006..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-strtoul.patch +++ /dev/null @@ -1,43 +0,0 @@ -Make simple_strtoul work with upper-case hex numbers. - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/lib_generic/vsprintf.c -=================================================================== ---- u-boot.orig/lib_generic/vsprintf.c -+++ u-boot/lib_generic/vsprintf.c -@@ -25,21 +25,22 @@ unsigned long simple_strtoul(const char - { - unsigned long result = 0,value; - -- if (*cp == '0') { -- cp++; -- if ((*cp == 'x') && isxdigit(cp[1])) { -- base = 16; -- cp++; -- } -- if (!base) { -- base = 8; -- } -- } - if (!base) { - base = 10; -+ if (*cp == '0') { -+ base = 8; -+ cp++; -+ if ((toupper(*cp) == 'X') && isxdigit(cp[1])) { -+ cp++; -+ base = 16; -+ } -+ } -+ } else if (base == 16) { -+ if (cp[0] == '0' && toupper(cp[1]) == 'X') -+ cp += 2; - } -- while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp) -- ? toupper(*cp) : *cp)-'A'+10) < base) { -+ while (isxdigit(*cp) && -+ (value = isdigit(*cp) ? *cp-'0' : toupper(*cp)-'A'+10) < base) { - result = result*base + value; - cp++; - } diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-usbtty-acm.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-usbtty-acm.patch deleted file mode 100644 index 722a227aa6..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/uboot-usbtty-acm.patch +++ /dev/null @@ -1,1607 +0,0 @@ -This patch adds cdc_acm interoperability to u-boot usbtty. - -It was taken (almost blindly) from the Linux for Siemens SX1 project on -handhelds.org. Please don't complain to me about coding style issues -or whitespace changes in this one - HW. - -Index: u-boot/drivers/usbtty.c -=================================================================== ---- u-boot.orig/drivers/usbtty.c 2007-02-08 21:11:27.000000000 +0100 -+++ u-boot/drivers/usbtty.c 2007-02-08 21:11:55.000000000 +0100 -@@ -1,6 +1,9 @@ - /* - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments -+ * -+ * (C) Copyright 2006 -+ * Bryan O'Donoghue, bodonoghue <at> codehermit.ie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by -@@ -22,26 +25,61 @@ - - #ifdef CONFIG_USB_TTY - -+#include <asm/io.h> - #include <circbuf.h> - #include <devices.h> - #include "usbtty.h" -+#include "usb_cdc_acm.h" -+#include "usbdescriptors.h" -+#include <config.h> /* If defined, override Linux identifiers with -+ * vendor specific ones */ - - #if 0 --#define TTYDBG(fmt,args...) serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args) -+//+++ debug print into memory buffer,like kernel log -+static char* log_buf = 0x10e00000; // somewhere in RAM -+static char log_str[512]; -+#define TTYDBG(fmt,args...)\ -+ sprintf(log_str,"\n[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args);\ -+ memcpy(log_buf, log_str, strlen(log_str));\ -+ log_buf+=strlen(log_str);\ -+ strcpy(log_buf,"\n---------------------------------------------------")\ -+//--- - #else - #define TTYDBG(fmt,args...) do{}while(0) - #endif - - #if 0 --#define TTYERR(fmt,args...) serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args) -+#define TTYDBG(fmt,args...)\ -+ serial_printf("[%s] %s %d: "fmt"\n", __FILE__,__FUNCTION__,__LINE__,##args) -+#endif -+ -+#if 0 -+#define TTYERR(fmt,args...)\ -+ serial_printf("ERROR![%s] %s %d: "fmt"\n", __FILE__,__FUNCTION__,\ -+ __LINE__,##args) - #else - #define TTYERR(fmt,args...) do{}while(0) - #endif - - /* -+ * Defines -+ */ -+#define NUM_CONFIGS 1 -+#define MAX_INTERFACES 2 -+#define NUM_ENDPOINTS 3 -+#define ACM_TX_ENDPOINT 3 -+#define ACM_RX_ENDPOINT 2 -+#define GSERIAL_TX_ENDPOINT 2 -+#define GSERIAL_RX_ENDPOINT 1 -+#define NUM_ACM_INTERFACES 2 -+#define NUM_GSERIAL_INTERFACES 1 -+#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface" -+#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface" -+ -+/* - * Buffers to hold input and output data - */ --#define USBTTY_BUFFER_SIZE 256 -+#define USBTTY_BUFFER_SIZE 2048 - static circbuf_t usbtty_input; - static circbuf_t usbtty_output; - -@@ -50,157 +88,336 @@ - * Instance variables - */ - static device_t usbttydev; --static struct usb_device_instance device_instance[1]; --static struct usb_bus_instance bus_instance[1]; -+static struct usb_device_instance device_instance[1]; -+static struct usb_bus_instance bus_instance[1]; - static struct usb_configuration_instance config_instance[NUM_CONFIGS]; --static struct usb_interface_instance interface_instance[NUM_INTERFACES]; --static struct usb_alternate_instance alternate_instance[NUM_INTERFACES]; --static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1]; /* one extra for control endpoint */ -- --/* -- * Static allocation of urbs -- */ --#define RECV_ENDPOINT 1 --#define TX_ENDPOINT 2 -+static struct usb_interface_instance interface_instance[MAX_INTERFACES]; -+static struct usb_alternate_instance alternate_instance[MAX_INTERFACES]; -+/* one extra for control endpoint */ -+static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1]; - - /* - * Global flag - */ - int usbtty_configured_flag = 0; - -- - /* - * Serial number - */ - static char serial_number[16]; - -+ - /* -- * Descriptors -+ * Descriptors, Strings, Local variables. - */ -+ -+/* defined and used by usbdcore_ep0.c */ -+extern struct usb_string_descriptor **usb_strings; -+ -+/* Indicies, References */ -+static unsigned short rx_endpoint = 0; -+static unsigned short tx_endpoint = 0; -+static unsigned short interface_count = 0; -+static struct usb_string_descriptor *usbtty_string_table[STR_COUNT]; -+ -+/* USB Descriptor Strings */ - static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4}; - static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)]; - static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)]; - static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)]; - static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)]; --static u8 wstrInterface[2 + 2*(sizeof(CONFIG_USBD_INTERFACE_STR)-1)]; -- --static struct usb_string_descriptor *usbtty_string_table[] = { -- (struct usb_string_descriptor*)wstrLang, -- (struct usb_string_descriptor*)wstrManufacturer, -- (struct usb_string_descriptor*)wstrProduct, -- (struct usb_string_descriptor*)wstrSerial, -- (struct usb_string_descriptor*)wstrConfiguration, -- (struct usb_string_descriptor*)wstrInterface --}; --extern struct usb_string_descriptor **usb_strings; /* defined and used by omap1510_ep0.c */ -+static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)]; -+static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)]; - -+/* Standard USB Data Structures */ -+static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES]; -+static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS]; -+static struct usb_configuration_descriptor *configuration_descriptor = 0; - static struct usb_device_descriptor device_descriptor = { -- bLength: sizeof(struct usb_device_descriptor), -- bDescriptorType: USB_DT_DEVICE, -- bcdUSB: USB_BCD_VERSION, -- bDeviceClass: USBTTY_DEVICE_CLASS, -- bDeviceSubClass: USBTTY_DEVICE_SUBCLASS, -- bDeviceProtocol: USBTTY_DEVICE_PROTOCOL, -- bMaxPacketSize0: EP0_MAX_PACKET_SIZE, -- idVendor: CONFIG_USBD_VENDORID, -- idProduct: CONFIG_USBD_PRODUCTID, -- bcdDevice: USBTTY_BCD_DEVICE, -- iManufacturer: STR_MANUFACTURER, -- iProduct: STR_PRODUCT, -- iSerialNumber: STR_SERIAL, -- bNumConfigurations: NUM_CONFIGS -- }; --static struct usb_configuration_descriptor config_descriptors[NUM_CONFIGS] = { -- { -- bLength: sizeof(struct usb_configuration_descriptor), -- bDescriptorType: USB_DT_CONFIG, -- wTotalLength: (sizeof(struct usb_configuration_descriptor)*NUM_CONFIGS) + -- (sizeof(struct usb_interface_descriptor)*NUM_INTERFACES) + -- (sizeof(struct usb_endpoint_descriptor)*NUM_ENDPOINTS), -- bNumInterfaces: NUM_INTERFACES, -- bConfigurationValue: 1, -- iConfiguration: STR_CONFIG, -- bmAttributes: BMATTRIBUTE_SELF_POWERED | BMATTRIBUTE_RESERVED, -- bMaxPower: USBTTY_MAXPOWER -- }, --}; --static struct usb_interface_descriptor interface_descriptors[NUM_INTERFACES] = { -- { -- bLength: sizeof(struct usb_interface_descriptor), -- bDescriptorType: USB_DT_INTERFACE, -- bInterfaceNumber: 0, -- bAlternateSetting: 0, -- bNumEndpoints: NUM_ENDPOINTS, -- bInterfaceClass: USBTTY_INTERFACE_CLASS, -- bInterfaceSubClass: USBTTY_INTERFACE_SUBCLASS, -- bInterfaceProtocol: USBTTY_INTERFACE_PROTOCOL, -- iInterface: STR_INTERFACE -- }, -+ .bLength = sizeof(struct usb_device_descriptor), -+ .bDescriptorType = USB_DT_DEVICE, -+ .bcdUSB = cpu_to_le16(USB_BCD_VERSION), -+ .bDeviceSubClass = 0x00, -+ .bDeviceProtocol = 0x00, -+ .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE, -+ .idVendor = cpu_to_le16(CONFIG_USBD_VENDORID), -+ .bcdDevice = cpu_to_le16(USBTTY_BCD_DEVICE), -+ .iManufacturer = STR_MANUFACTURER, -+ .iProduct = STR_PRODUCT, -+ .iSerialNumber = STR_SERIAL, -+ .bNumConfigurations = NUM_CONFIGS - }; --static struct usb_endpoint_descriptor ep_descriptors[NUM_ENDPOINTS] = { -- { -- bLength: sizeof(struct usb_endpoint_descriptor), -- bDescriptorType: USB_DT_ENDPOINT, -- bEndpointAddress: CONFIG_USBD_SERIAL_OUT_ENDPOINT | USB_DIR_OUT, -- bmAttributes: USB_ENDPOINT_XFER_BULK, -- wMaxPacketSize: CONFIG_USBD_SERIAL_OUT_PKTSIZE, -- bInterval: 0 -- }, -- { -- bLength: sizeof(struct usb_endpoint_descriptor), -- bDescriptorType: USB_DT_ENDPOINT, -- bEndpointAddress: CONFIG_USBD_SERIAL_IN_ENDPOINT | USB_DIR_IN, -- bmAttributes: USB_ENDPOINT_XFER_BULK, -- wMaxPacketSize: CONFIG_USBD_SERIAL_IN_PKTSIZE, -- bInterval: 0 -- }, -- { -- bLength: sizeof(struct usb_endpoint_descriptor), -- bDescriptorType: USB_DT_ENDPOINT, -- bEndpointAddress: CONFIG_USBD_SERIAL_INT_ENDPOINT | USB_DIR_IN, -- bmAttributes: USB_ENDPOINT_XFER_INT, -- wMaxPacketSize: CONFIG_USBD_SERIAL_INT_PKTSIZE, -- bInterval: 0 -- }, --}; --static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS] = { -- &(ep_descriptors[0]), -- &(ep_descriptors[1]), -- &(ep_descriptors[2]), -+ -+ -+/* -+ * Static CDC ACM specific descriptors -+ */ -+ -+struct acm_config_desc { -+ struct usb_configuration_descriptor configuration_desc; -+ -+ /* Master Interface */ -+ struct usb_interface_descriptor interface_desc; -+ -+ struct usb_class_header_function_descriptor usb_class_header; -+ struct usb_class_call_management_descriptor usb_class_call_mgt; -+ struct usb_class_abstract_control_descriptor usb_class_acm; -+ struct usb_class_union_function_descriptor usb_class_union; -+ struct usb_endpoint_descriptor notification_endpoint; -+ -+ /* Slave Interface */ -+ struct usb_interface_descriptor data_class_interface; -+ struct usb_endpoint_descriptor -+ data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed)); -+} __attribute__((packed)); -+ -+static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = { -+ { -+ .configuration_desc ={ -+ .bLength = -+ sizeof(struct usb_configuration_descriptor), -+ .bDescriptorType = USB_DT_CONFIG, -+ .wTotalLength = -+ cpu_to_le16(sizeof(struct acm_config_desc)), -+ .bNumInterfaces = NUM_ACM_INTERFACES, -+ .bConfigurationValue = 1, -+ .iConfiguration = STR_CONFIG, -+ .bmAttributes = -+ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, -+ .bMaxPower = USBTTY_MAXPOWER -+ }, -+ /* Interface 1 */ -+ .interface_desc = { -+ .bLength = sizeof(struct usb_interface_descriptor), -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0, -+ .bAlternateSetting = 0, -+ .bNumEndpoints = 0x01, -+ .bInterfaceClass = -+ COMMUNICATIONS_INTERFACE_CLASS_CONTROL, -+ .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS, -+ .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL, -+ .iInterface = STR_CTRL_INTERFACE, -+ }, -+ .usb_class_header = { -+ .bFunctionLength = -+ sizeof(struct usb_class_header_function_descriptor), -+ .bDescriptorType = CS_INTERFACE, -+ .bDescriptorSubtype = USB_ST_HEADER, -+ .bcdCDC = cpu_to_le16(110), -+ }, -+ .usb_class_call_mgt = { -+ .bFunctionLength = -+ sizeof(struct usb_class_call_management_descriptor), -+ .bDescriptorType = CS_INTERFACE, -+ .bDescriptorSubtype = USB_ST_CMF, -+ .bmCapabilities = 0x00, -+ .bDataInterface = 0x01, -+ }, -+ .usb_class_acm = { -+ .bFunctionLength = -+ sizeof(struct usb_class_abstract_control_descriptor), -+ .bDescriptorType = CS_INTERFACE, -+ .bDescriptorSubtype = USB_ST_ACMF, -+ .bmCapabilities = 0x00, -+ }, -+ .usb_class_union = { -+ .bFunctionLength = -+ sizeof(struct usb_class_union_function_descriptor), -+ .bDescriptorType = CS_INTERFACE, -+ .bDescriptorSubtype = USB_ST_UF, -+ .bMasterInterface = 0x00, -+ .bSlaveInterface0 = 0x01, -+ }, -+ .notification_endpoint = { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x01 | USB_DIR_IN, -+ .bmAttributes = USB_ENDPOINT_XFER_INT, -+ .wMaxPacketSize -+ = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ -+ /* Interface 2 */ -+ .data_class_interface = { -+ .bLength = -+ sizeof(struct usb_interface_descriptor), -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0x01, -+ .bAlternateSetting = 0x00, -+ .bNumEndpoints = 0x02, -+ .bInterfaceClass = -+ COMMUNICATIONS_INTERFACE_CLASS_DATA, -+ .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE, -+ .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE, -+ .iInterface = STR_DATA_INTERFACE, -+ }, -+ .data_endpoints = { -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x02 | USB_DIR_OUT, -+ .bmAttributes = -+ USB_ENDPOINT_XFER_BULK, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x03 | USB_DIR_IN, -+ .bmAttributes = -+ USB_ENDPOINT_XFER_BULK, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ }, -+ }, -+}; -+ -+static struct rs232_emu rs232_desc={ -+ .dter = 115200, -+ .stop_bits = 0x00, -+ .parity = 0x00, -+ .data_bits = 0x08 - }; - --/* utility function for converting char* to wide string used by USB */ --static void str2wide (char *str, u16 * wide) --{ -- int i; - -- for (i = 0; i < strlen (str) && str[i]; i++) -- wide[i] = (u16) str[i]; --} -+/* -+ * Static Generic Serial specific data -+ */ -+ -+ -+struct gserial_config_desc { -+ -+ struct usb_configuration_descriptor configuration_desc; -+ struct usb_interface_descriptor -+ interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed)); -+ struct usb_endpoint_descriptor -+ data_endpoints[NUM_ENDPOINTS] __attribute__((packed)); -+ -+} __attribute__((packed)); -+ -+static struct gserial_config_desc -+gserial_configuration_descriptors[NUM_CONFIGS] ={ -+ { -+ .configuration_desc ={ -+ .bLength = sizeof(struct usb_configuration_descriptor), -+ .bDescriptorType = USB_DT_CONFIG, -+ .wTotalLength = -+ cpu_to_le16(sizeof(struct gserial_config_desc)), -+ .bNumInterfaces = NUM_GSERIAL_INTERFACES, -+ .bConfigurationValue = 1, -+ .iConfiguration = STR_CONFIG, -+ .bmAttributes = -+ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, -+ .bMaxPower = USBTTY_MAXPOWER -+ }, -+ .interface_desc = { -+ { -+ .bLength = -+ sizeof(struct usb_interface_descriptor), -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0, -+ .bAlternateSetting = 0, -+ .bNumEndpoints = NUM_ENDPOINTS, -+ .bInterfaceClass = -+ COMMUNICATIONS_INTERFACE_CLASS_VENDOR, -+ .bInterfaceSubClass = -+ COMMUNICATIONS_NO_SUBCLASS, -+ .bInterfaceProtocol = -+ COMMUNICATIONS_NO_PROTOCOL, -+ .iInterface = STR_DATA_INTERFACE -+ }, -+ }, -+ .data_endpoints = { -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x01 | USB_DIR_OUT, -+ .bmAttributes = USB_ENDPOINT_XFER_BULK, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE), -+ .bInterval= 0xFF, -+ }, -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x02 | USB_DIR_IN, -+ .bmAttributes = USB_ENDPOINT_XFER_BULK, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ { -+ .bLength = -+ sizeof(struct usb_endpoint_descriptor), -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0x03 | USB_DIR_IN, -+ .bmAttributes = USB_ENDPOINT_XFER_INT, -+ .wMaxPacketSize = -+ cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), -+ .bInterval = 0xFF, -+ }, -+ }, -+ }, -+}; - - /* -- * Prototypes -+ * Static Function Prototypes - */ -+ - static void usbtty_init_strings (void); - static void usbtty_init_instances (void); - static void usbtty_init_endpoints (void); -- -+static void usbtty_init_terminal_type(short type); - static void usbtty_event_handler (struct usb_device_instance *device, -- usb_device_event_t event, int data); -+ usb_device_event_t event, int data); -+static int usbtty_cdc_setup(struct usb_device_request *request, -+ struct urb *urb); - static int usbtty_configured (void); -- - static int write_buffer (circbuf_t * buf); - static int fill_buffer (circbuf_t * buf); - - void usbtty_poll (void); --static void pretend_interrupts (void); - -+/* utility function for converting char* to wide string used by USB */ -+static void str2wide (char *str, u16 * wide) -+{ -+ int i; -+ for (i = 0; i < strlen (str) && str[i]; i++){ -+ #if defined(__LITTLE_ENDIAN) -+ wide[i] = (u16) str[i]; -+ #elif defined(__BIG_ENDIAN) -+ wide[i] = ((u16)(str[i])<<8); -+ #else -+ #error "__LITTLE_ENDIAN or __BIG_ENDIAN undefined" -+ #endif -+ } -+} - - /* - * Test whether a character is in the RX buffer - */ -+ - int usbtty_tstc (void) - { -+ struct usb_endpoint_instance *endpoint = -+ &endpoint_instance[rx_endpoint]; -+ -+ /* If no input data exists, allow more RX to be accepted */ -+ if(usbtty_input.size <= 0){ -+ udc_unset_nak(endpoint->endpoint_address&0x03); -+ } -+ - usbtty_poll (); - return (usbtty_input.size > 0); - } -@@ -210,15 +427,21 @@ - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -+ - int usbtty_getc (void) - { - char c; -+ struct usb_endpoint_instance *endpoint = -+ &endpoint_instance[rx_endpoint]; - - while (usbtty_input.size <= 0) { -+ udc_unset_nak(endpoint->endpoint_address&0x03); - usbtty_poll (); - } - - buf_pop (&usbtty_input, &c, 1); -+ udc_set_nak(endpoint->endpoint_address&0x03); -+ - return c; - } - -@@ -238,7 +461,6 @@ - } - } - -- - /* usbtty_puts() helper function for finding the next '\n' in a string */ - static int next_nl_pos (const char *s) - { -@@ -252,8 +474,9 @@ - } - - /* -- * Output a string to the usb client port. -+ * Output a string to the usb client port - implementing flow control - */ -+ - static void __usbtty_puts (const char *str, int len) - { - int maxlen = usbtty_output.totalsize; -@@ -261,22 +484,19 @@ - - /* break str into chunks < buffer size, if needed */ - while (len > 0) { -- space = maxlen - usbtty_output.size; -+ usbtty_poll (); - -+ space = maxlen - usbtty_output.size; - /* Empty buffer here, if needed, to ensure space... */ -- if (space <= 0) { -+ if (space) { - write_buffer (&usbtty_output); -- space = maxlen - usbtty_output.size; -- if (space <= 0) { -- space = len; /* allow old data to be overwritten. */ -- } -- } -- -- n = MIN (space, MIN (len, maxlen)); -- buf_push (&usbtty_output, str, n); -+ -+ n = MIN (space, MIN (len, maxlen)); -+ buf_push (&usbtty_output, str, n); - -- str += n; -- len -= n; -+ str += n; -+ len -= n; -+ } - } - } - -@@ -313,8 +533,10 @@ - { - int rc; - char * sn; -+ char * tt; - int snlen; - -+ /* Get serial number */ - if (!(sn = getenv("serial#"))) { - sn = "000000000000"; - } -@@ -327,6 +549,14 @@ - memcpy (serial_number, sn, snlen); - serial_number[snlen] = '\0'; - -+ /* Decide on which type of UDC device to be. -+ */ -+ -+ if(!(tt = getenv("usbtty"))) { -+ tt = "generic"; -+ } -+ usbtty_init_terminal_type(strcmp(tt,"cdc_acm")); -+ - /* prepare buffers... */ - buf_init (&usbtty_input, USBTTY_BUFFER_SIZE); - buf_init (&usbtty_output, USBTTY_BUFFER_SIZE); -@@ -337,7 +567,7 @@ - usbtty_init_strings (); - usbtty_init_instances (); - -- udc_startup_events (device_instance); /* Enable our device, initialize udc pointers */ -+ udc_startup_events (device_instance);/* Enable dev, init udc pointers */ - udc_connect (); /* Enable pullup for host detection */ - - usbtty_init_endpoints (); -@@ -362,34 +592,52 @@ - { - struct usb_string_descriptor *string; - -+ usbtty_string_table[STR_LANG] = -+ (struct usb_string_descriptor*)wstrLang; -+ - string = (struct usb_string_descriptor *) wstrManufacturer; -- string->bLength = sizeof (wstrManufacturer); -+ string->bLength = sizeof(wstrManufacturer); - string->bDescriptorType = USB_DT_STRING; - str2wide (CONFIG_USBD_MANUFACTURER, string->wData); -+ usbtty_string_table[STR_MANUFACTURER]=string; -+ - - string = (struct usb_string_descriptor *) wstrProduct; -- string->bLength = sizeof (wstrProduct); -+ string->bLength = sizeof(wstrProduct); - string->bDescriptorType = USB_DT_STRING; - str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData); -+ usbtty_string_table[STR_PRODUCT]=string; -+ - - string = (struct usb_string_descriptor *) wstrSerial; -- string->bLength = 2 + 2*strlen(serial_number); -+ string->bLength = sizeof(serial_number); - string->bDescriptorType = USB_DT_STRING; - str2wide (serial_number, string->wData); -+ usbtty_string_table[STR_SERIAL]=string; -+ - - string = (struct usb_string_descriptor *) wstrConfiguration; -- string->bLength = sizeof (wstrConfiguration); -+ string->bLength = sizeof(wstrConfiguration); - string->bDescriptorType = USB_DT_STRING; - str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData); -+ usbtty_string_table[STR_CONFIG]=string; -+ -+ -+ string = (struct usb_string_descriptor *) wstrDataInterface; -+ string->bLength = sizeof(wstrDataInterface); -+ string->bDescriptorType = USB_DT_STRING; -+ str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData); -+ usbtty_string_table[STR_DATA_INTERFACE]=string; - -- string = (struct usb_string_descriptor *) wstrInterface; -- string->bLength = sizeof (wstrInterface); -+ string = (struct usb_string_descriptor *) wstrCtrlInterface; -+ string->bLength = sizeof(wstrCtrlInterface); - string->bDescriptorType = USB_DT_STRING; -- str2wide (CONFIG_USBD_INTERFACE_STR, string->wData); -+ str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData); -+ usbtty_string_table[STR_CTRL_INTERFACE]=string; - - /* Now, initialize the string table for ep0 handling */ - usb_strings = usbtty_string_table; --} -+} - - static void usbtty_init_instances (void) - { -@@ -400,6 +648,7 @@ - device_instance->device_state = STATE_INIT; - device_instance->device_descriptor = &device_descriptor; - device_instance->event = usbtty_event_handler; -+ device_instance->cdc_recv_setup = usbtty_cdc_setup; - device_instance->bus = bus_instance; - device_instance->configurations = NUM_CONFIGS; - device_instance->configuration_instance_array = config_instance; -@@ -415,8 +664,8 @@ - /* configuration instance */ - memset (config_instance, 0, - sizeof (struct usb_configuration_instance)); -- config_instance->interfaces = NUM_INTERFACES; -- config_instance->configuration_descriptor = config_descriptors; -+ config_instance->interfaces = interface_count; -+ config_instance->configuration_descriptor = configuration_descriptor; - config_instance->interface_instance_array = interface_instance; - - /* interface instance */ -@@ -447,17 +696,22 @@ - sizeof (struct usb_endpoint_instance)); - - endpoint_instance[i].endpoint_address = -- ep_descriptors[i - 1].bEndpointAddress; -+ ep_descriptor_ptrs[i - 1]->bEndpointAddress; - -- endpoint_instance[i].rcv_packetSize = -- ep_descriptors[i - 1].wMaxPacketSize; - endpoint_instance[i].rcv_attributes = -- ep_descriptors[i - 1].bmAttributes; -+ ep_descriptor_ptrs[i - 1]->bmAttributes; -+ -+ endpoint_instance[i].rcv_packetSize = -+ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize); -+ -+ endpoint_instance[i].tx_attributes = -+ ep_descriptor_ptrs[i - 1]->bmAttributes; - - endpoint_instance[i].tx_packetSize = -- ep_descriptors[i - 1].wMaxPacketSize; -+ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize); -+ - endpoint_instance[i].tx_attributes = -- ep_descriptors[i - 1].bmAttributes; -+ ep_descriptor_ptrs[i - 1]->bmAttributes; - - urb_link_init (&endpoint_instance[i].rcv); - urb_link_init (&endpoint_instance[i].rdy); -@@ -480,13 +734,79 @@ - int i; - - bus_instance->max_endpoints = NUM_ENDPOINTS + 1; -- for (i = 0; i <= NUM_ENDPOINTS; i++) { -+ for (i = 1; i <= NUM_ENDPOINTS; i++) { - udc_setup_ep (device_instance, i, &endpoint_instance[i]); - } - } - -+/* usbtty_init_terminal_type -+ * -+ * Do some late binding for our device type. -+ */ -+static void usbtty_init_terminal_type(short type) -+{ -+ switch(type){ -+ /* CDC ACM */ -+ case 0: -+ /* Assign endpoint descriptors */ -+ ep_descriptor_ptrs[0] = -+ &acm_configuration_descriptors[0].notification_endpoint; -+ ep_descriptor_ptrs[1] = -+ &acm_configuration_descriptors[0].data_endpoints[0]; -+ ep_descriptor_ptrs[2] = -+ &acm_configuration_descriptors[0].data_endpoints[1]; -+ -+ /* Enumerate Device Descriptor */ -+ device_descriptor.bDeviceClass = -+ COMMUNICATIONS_DEVICE_CLASS; -+ device_descriptor.idProduct = -+ cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM); -+ -+ /* Assign endpoint indices */ -+ tx_endpoint = ACM_TX_ENDPOINT; -+ rx_endpoint = ACM_RX_ENDPOINT; -+ -+ /* Configuration Descriptor */ -+ configuration_descriptor = -+ (struct usb_configuration_descriptor*) -+ &acm_configuration_descriptors; -+ -+ /* Interface count */ -+ interface_count = NUM_ACM_INTERFACES; -+ break; -+ -+ /* BULK IN/OUT & Default */ -+ case 1: -+ default: -+ /* Assign endpoint descriptors */ -+ ep_descriptor_ptrs[0] = -+ &gserial_configuration_descriptors[0].data_endpoints[0]; -+ ep_descriptor_ptrs[1] = -+ &gserial_configuration_descriptors[0].data_endpoints[1]; -+ ep_descriptor_ptrs[2] = -+ &gserial_configuration_descriptors[0].data_endpoints[2]; -+ -+ /* Enumerate Device Descriptor */ -+ device_descriptor.bDeviceClass = 0xFF; -+ device_descriptor.idProduct = -+ cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL); -+ -+ /* Assign endpoint indices */ -+ tx_endpoint = GSERIAL_TX_ENDPOINT; -+ rx_endpoint = GSERIAL_RX_ENDPOINT; -+ -+ /* Configuration Descriptor */ -+ configuration_descriptor = -+ (struct usb_configuration_descriptor*) -+ &gserial_configuration_descriptors; -+ -+ /* Interface count */ -+ interface_count = NUM_GSERIAL_INTERFACES; -+ break; -+ } -+} - --/*********************************************************************************/ -+/******************************************************************************/ - - static struct urb *next_urb (struct usb_device_instance *device, - struct usb_endpoint_instance *endpoint) -@@ -522,82 +842,179 @@ - - static int write_buffer (circbuf_t * buf) - { -- if (!usbtty_configured ()) { -- return 0; -- } -+ if (!usbtty_configured ()) { -+ return 0; -+ } -+ -+ if (buf->size) { -+ -+ struct usb_endpoint_instance *endpoint = -+ &endpoint_instance[tx_endpoint]; -+ struct urb *current_urb = NULL; -+ char *dest; -+ -+ int space_avail; -+ int popnum, popped; -+ int total = 0; -+ -+ /* Break buffer into urb sized pieces, and link each to the endpoint */ -+ while (buf->size > 0) { -+ TTYDBG ("buf->size= %d",buf->size); -+ current_urb = next_urb (device_instance, endpoint); -+ if (!current_urb) { -+ TTYDBG ("current_urb is NULL, buf->size %d\n", -+ buf->size); -+ return total; -+ } -+ -+ dest = current_urb->buffer + -+ current_urb->actual_length; -+ -+ space_avail = -+ current_urb->buffer_length - -+ current_urb->actual_length; -+ TTYDBG ("space_avail= %d",space_avail); -+ popnum = MIN (space_avail, buf->size); -+ if (popnum == 0) -+ break; -+ -+ popped = buf_pop (buf, dest, popnum); -+ TTYDBG ("popped= %d, %s",popped, dest); -+ if (popped == 0) -+ break; -+ current_urb->actual_length += popped; -+ total += popped; -+ -+ /* If endpoint->last == 0, then transfers have not started on this endpoint */ -+ if (endpoint->last == 0) { -+ udc_endpoint_write (endpoint); -+ } -+ -+ } /* end while */ -+ TTYDBG (" total= %d",total); -+ return total; -+ } /* end if tx_urb */ - -- if (buf->size) { -+ return 0; -+} -+// static int write_buffer (circbuf_t * buf) -+// { -+// if (!usbtty_configured ()) { -+// return 0; -+// } -+// -+// struct usb_endpoint_instance *endpoint = -+// &endpoint_instance[tx_endpoint]; -+// struct urb *current_urb = NULL; -+// -+// current_urb = next_urb (device_instance, endpoint); -+// /* TX data still exists - send it now -+// */ -+// if(endpoint->sent < current_urb->actual_length){ -+// if(udc_endpoint_write (endpoint)){ -+// /* Write pre-empted by RX */ -+// return -1; -+// } -+// } -+// -+// if (buf->size) { -+// char *dest; -+// -+// int space_avail; -+// int popnum, popped; -+// int total = 0; -+// -+// /* Break buffer into urb sized pieces, -+// * and link each to the endpoint -+// */ -+// while (buf->size > 0) { -+// -+// if (!current_urb) { -+// TTYERR ("current_urb is NULL, buf->size %d\n", -+// buf->size); -+// return total; -+// } -+// -+// dest = (char*)current_urb->buffer + -+// current_urb->actual_length; -+// -+// space_avail = -+// current_urb->buffer_length - -+// current_urb->actual_length; -+// popnum = MIN (space_avail, buf->size); -+// if (popnum == 0) -+// break; -+// -+// popped = buf_pop (buf, dest, popnum); -+// if (popped == 0) -+// break; -+// current_urb->actual_length += popped; -+// total += popped; -+// -+// /* If endpoint->last == 0, then transfers have -+// * not started on this endpoint -+// */ -+// if (endpoint->last == 0) { -+// if(udc_endpoint_write (endpoint)){ -+// /* Write pre-empted by RX */ -+// return -1; -+// } -+// } -+// -+// }/* end while */ -+// return total; -+// } -+// -+// return 0; -+// } - -- struct usb_endpoint_instance *endpoint = -- &endpoint_instance[TX_ENDPOINT]; -- struct urb *current_urb = NULL; -- char *dest; -- -- int space_avail; -- int popnum, popped; -- int total = 0; -- -- /* Break buffer into urb sized pieces, and link each to the endpoint */ -- while (buf->size > 0) { -- current_urb = next_urb (device_instance, endpoint); -- if (!current_urb) { -- TTYERR ("current_urb is NULL, buf->size %d\n", -- buf->size); -- return total; -- } -- -- dest = current_urb->buffer + -- current_urb->actual_length; -- -- space_avail = -- current_urb->buffer_length - -- current_urb->actual_length; -- popnum = MIN (space_avail, buf->size); -- if (popnum == 0) -- break; -- -- popped = buf_pop (buf, dest, popnum); -- if (popped == 0) -- break; -- current_urb->actual_length += popped; -- total += popped; -- -- /* If endpoint->last == 0, then transfers have not started on this endpoint */ -- if (endpoint->last == 0) { -- udc_endpoint_write (endpoint); -- } -- -- } /* end while */ -- return total; -- } /* end if tx_urb */ -+static int fill_buffer (circbuf_t * buf) -+{ -+ struct usb_endpoint_instance *endpoint = -+ &endpoint_instance[rx_endpoint]; - -- return 0; --} -+ if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) { -+ unsigned int nb = endpoint->rcv_urb->actual_length; -+ char *src = (char *) endpoint->rcv_urb->buffer; - -+ buf_push (buf, src, nb); -+ endpoint->rcv_urb->actual_length = 0; -+ -+ TTYDBG ("nb= %d",nb); -+ return nb; -+ } -+ -+ return 0; -+} -+/* - static int fill_buffer (circbuf_t * buf) - { - struct usb_endpoint_instance *endpoint = -- &endpoint_instance[RECV_ENDPOINT]; -+ &endpoint_instance[rx_endpoint]; - - if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) { -- unsigned int nb = endpoint->rcv_urb->actual_length; -+ unsigned int nb = 0; - char *src = (char *) endpoint->rcv_urb->buffer; -+ unsigned int rx_avail = buf->totalsize - buf->size; - -- buf_push (buf, src, nb); -- endpoint->rcv_urb->actual_length = 0; -+ if(rx_avail >= endpoint->rcv_urb->actual_length){ - -+ nb = endpoint->rcv_urb->actual_length; -+ buf_push (buf, src, nb); -+ endpoint->rcv_urb->actual_length = 0; -+ -+ } - return nb; - } -- - return 0; - } -- -+*/ - static int usbtty_configured (void) - { - return usbtty_configured_flag; - } - --/*********************************************************************************/ -+/******************************************************************************/ - - static void usbtty_event_handler (struct usb_device_instance *device, - usb_device_event_t event, int data) -@@ -619,8 +1036,34 @@ - } - } - --/*********************************************************************************/ -+/******************************************************************************/ - -+int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb) -+{ -+ switch (request->bRequest){ -+ -+ case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */ -+ break; -+ case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */ -+ break; -+ case ACM_SET_LINE_ENCODING : /* DTE stop/parity bits -+ * per character */ -+ break; -+ case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */ -+ break; -+ case ACM_GET_LINE_ENCODING : /* request DTE rate, -+ * stop/parity bits */ -+ memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc)); -+ urb->actual_length = sizeof(rs232_desc); -+ -+ break; -+ default: -+ return 1; -+ } -+ return 0; -+} -+ -+/******************************************************************************/ - - /* - * Since interrupt handling has not yet been implemented, we use this function -@@ -630,36 +1073,29 @@ - void usbtty_poll (void) - { - /* New interrupts? */ -- pretend_interrupts (); -+ udc_irq(); - -- /* Write any output data to host buffer (do this before checking interrupts to avoid missing one) */ -+ /* Write any output data to host buffer -+ * (do this before checking interrupts to avoid missing one) -+ */ - if (usbtty_configured ()) { - write_buffer (&usbtty_output); - } - - /* New interrupts? */ -- pretend_interrupts (); -- -- /* Check for new data from host.. (do this after checking interrupts to get latest data) */ -+ udc_irq(); -+ -+ /* Check for new data from host.. -+ * (do this after checking interrupts to get latest data) -+ */ - if (usbtty_configured ()) { - fill_buffer (&usbtty_input); - } - - /* New interrupts? */ -- pretend_interrupts (); --} -+ udc_irq(); - --static void pretend_interrupts (void) --{ -- /* Loop while we have interrupts. -- * If we don't do this, the input chain -- * polling delay is likely to miss -- * host requests. -- */ -- while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { -- /* Handle any new IRQs */ -- omap1510_udc_irq (); -- omap1510_udc_noniso_irq (); -- } - } -+ -+ - #endif -Index: u-boot/drivers/usbtty.h -=================================================================== ---- u-boot.orig/drivers/usbtty.h 2007-02-08 21:11:27.000000000 +0100 -+++ u-boot/drivers/usbtty.h 2007-02-08 21:11:55.000000000 +0100 -@@ -2,6 +2,9 @@ - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments - * -+ * (C) Copyright 2006 -+ * Bryan O'Donoghue, bodonoghue <at> codehermit.ie, CodeHermit -+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or -@@ -21,44 +24,49 @@ - #ifndef __USB_TTY_H__ - #define __USB_TTY_H__ - -- - #include "usbdcore.h" -+#if defined(CONFIG_PPC) -+#include "usbdcore_mpc8xx.h" -+#elif defined(CONFIG_OMAP1510) - #include "usbdcore_omap1510.h" -+#endif - -+#include <config.h> -+#include <version.h> - --#define NUM_CONFIGS 1 --#define NUM_INTERFACES 1 --#define NUM_ENDPOINTS 3 -+/* If no VendorID/ProductID is defined in config.h, pretend to be Linux -+ * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */ - --#define EP0_MAX_PACKET_SIZE 64 -+#ifndef CONFIG_USBD_VENDORID -+#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */ -+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */ -+#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */ -+#define CONFIG_USBD_MANUFACTURER "Das U-Boot" -+#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION -+#endif /* CONFIG_USBD_VENDORID */ - - #define CONFIG_USBD_CONFIGURATION_STR "TTY via USB" --#define CONFIG_USBD_INTERFACE_STR "Simple Serial Data Interface - Bulk Mode" -- -- --#define CONFIG_USBD_SERIAL_OUT_ENDPOINT 2 --#define CONFIG_USBD_SERIAL_OUT_PKTSIZE 64 --#define CONFIG_USBD_SERIAL_IN_ENDPOINT 1 --#define CONFIG_USBD_SERIAL_IN_PKTSIZE 64 --#define CONFIG_USBD_SERIAL_INT_ENDPOINT 5 --#define CONFIG_USBD_SERIAL_INT_PKTSIZE 16 - -+#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT -+#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE -+#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT -+#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE -+#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT -+#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE -+#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE - - #define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS --#define USBTTY_DEVICE_SUBCLASS COMMUNICATIONS_NO_SUBCLASS --#define USBTTY_DEVICE_PROTOCOL COMMUNICATIONS_NO_PROTOCOL - --#define USBTTY_INTERFACE_CLASS 0xFF /* Vendor Specific */ --#define USBTTY_INTERFACE_SUBCLASS 0x02 --#define USBTTY_INTERFACE_PROTOCOL 0x01 -- --#define USBTTY_BCD_DEVICE 0x0 --#define USBTTY_MAXPOWER 0x0 -- --#define STR_MANUFACTURER 1 --#define STR_PRODUCT 2 --#define STR_SERIAL 3 --#define STR_CONFIG 4 --#define STR_INTERFACE 5 -+#define USBTTY_BCD_DEVICE 0x00 -+#define USBTTY_MAXPOWER 0x00 -+ -+#define STR_LANG 0x00 -+#define STR_MANUFACTURER 0x01 -+#define STR_PRODUCT 0x02 -+#define STR_SERIAL 0x03 -+#define STR_CONFIG 0x04 -+#define STR_DATA_INTERFACE 0x05 -+#define STR_CTRL_INTERFACE 0x06 -+#define STR_COUNT 0x07 - - #endif -Index: u-boot/drivers/usbdcore_omap1510.c -=================================================================== ---- u-boot.orig/drivers/usbdcore_omap1510.c 2007-02-08 21:11:27.000000000 +0100 -+++ u-boot/drivers/usbdcore_omap1510.c 2007-02-08 21:11:55.000000000 +0100 -@@ -960,7 +960,7 @@ - /* Handle general USB interrupts and dispatch according to type. - * This function implements TRM Figure 14-13. - */ --void omap1510_udc_irq (void) -+static void omap1510_udc_irq (void) - { - u16 irq_src = inw (UDC_IRQ_SRC); - int valid_irq = 0; -@@ -1000,7 +1000,7 @@ - } - - /* This function implements TRM Figure 14-26. */ --void omap1510_udc_noniso_irq (void) -+static void omap1510_udc_noniso_irq (void) - { - unsigned short epnum; - unsigned short irq_src = inw (UDC_IRQ_SRC); -@@ -1054,6 +1054,20 @@ - irq_src); - } - -+void udc_irq(void) -+{ -+ /* Loop while we have interrupts. -+ * If we don't do this, the input chain -+ * polling delay is likely to miss -+ * host requests. -+ */ -+ while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { -+ /* Handle any new IRQs */ -+ omap1510_udc_irq (); -+ omap1510_udc_noniso_irq (); -+ } -+} -+ - /* - ------------------------------------------------------------------------------- - */ -Index: u-boot/include/usb_cdc_acm.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ u-boot/include/usb_cdc_acm.h 2007-02-08 21:11:55.000000000 +0100 -@@ -0,0 +1,43 @@ -+/* -+ * (C) Copyright 2006 -+ * Bryan O'Donoghue, deckard <at> codehermit.ie, CodeHermit -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+/* ACM Control Requests */ -+#define ACM_SEND_ENCAPSULATED_COMMAND 0x00 -+#define ACM_GET_ENCAPSULATED_RESPONSE 0x01 -+#define ACM_SET_COMM_FEATURE 0x02 -+#define ACM_GET_COMM_FEATRUE 0x03 -+#define ACM_CLEAR_COMM_FEATURE 0x04 -+#define ACM_SET_LINE_ENCODING 0x20 -+#define ACM_GET_LINE_ENCODING 0x21 -+#define ACM_SET_CONTROL_LINE_STATE 0x22 -+#define ACM_SEND_BREAK 0x23 -+ -+/* ACM Notification Codes */ -+#define ACM_NETWORK_CONNECTION 0x00 -+#define ACM_RESPONSE_AVAILABLE 0x01 -+#define ACM_SERIAL_STATE 0x20 -+ -+/* Format of response expected by a ACM_GET_LINE_ENCODING request */ -+struct rs232_emu{ -+ unsigned long dter; -+ unsigned char stop_bits; -+ unsigned char parity; -+ unsigned char data_bits; -+}__attribute__((packed)); -Index: u-boot/include/usbdcore_omap1510.h -=================================================================== ---- u-boot.orig/include/usbdcore_omap1510.h 2007-02-08 21:11:27.000000000 +0100 -+++ u-boot/include/usbdcore_omap1510.h 2007-02-08 21:11:55.000000000 +0100 -@@ -161,13 +161,23 @@ - #define UDC_VBUS_CTRL (1 << 19) - #define UDC_VBUS_MODE (1 << 18) - -- --void omap1510_udc_irq(void); --void omap1510_udc_noniso_irq(void); -- -+/* OMAP Endpoint parameters */ -+#define EP0_MAX_PACKET_SIZE 64 -+#define UDC_OUT_ENDPOINT 2 -+#define UDC_OUT_PACKET_SIZE 64 -+#define UDC_IN_ENDPOINT 1 -+#define UDC_IN_PACKET_SIZE 64 -+#define UDC_INT_ENDPOINT 5 -+#define UDC_INT_PACKET_SIZE 16 -+#define UDC_BULK_PACKET_SIZE 16 -+ -+void udc_irq (void); -+/* Flow control */ -+void udc_set_nak(int epid); -+void udc_unset_nak (int epid); - - /* Higher level functions for abstracting away from specific device */ --void udc_endpoint_write(struct usb_endpoint_instance *endpoint); -+int udc_endpoint_write(struct usb_endpoint_instance *endpoint); - - int udc_init (void); - -Index: u-boot/include/usbdescriptors.h -=================================================================== ---- u-boot.orig/include/usbdescriptors.h 2007-02-08 21:11:27.000000000 +0100 -+++ u-boot/include/usbdescriptors.h 2007-02-08 21:11:55.000000000 +0100 -@@ -92,15 +92,17 @@ - #define COMMUNICATIONS_DEVICE_CLASS 0x02 - - /* c.f. CDC 4.2 Table 15 */ --#define COMMUNICATIONS_INTERFACE_CLASS 0x02 -+#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL 0x02 -+#define COMMUNICATIONS_INTERFACE_CLASS_DATA 0x0A -+#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR 0x0FF - - /* c.f. CDC 4.3 Table 16 */ --#define COMMUNICATIONS_NO_SUBCLASS 0x00 -+#define COMMUNICATIONS_NO_SUBCLASS 0x00 - #define COMMUNICATIONS_DLCM_SUBCLASS 0x01 --#define COMMUNICATIONS_ACM_SUBCLASS 0x02 --#define COMMUNICATIONS_TCM_SUBCLASS 0x03 -+#define COMMUNICATIONS_ACM_SUBCLASS 0x02 -+#define COMMUNICATIONS_TCM_SUBCLASS 0x03 - #define COMMUNICATIONS_MCCM_SUBCLASS 0x04 --#define COMMUNICATIONS_CCM_SUBCLASS 0x05 -+#define COMMUNICATIONS_CCM_SUBCLASS 0x05 - #define COMMUNICATIONS_ENCM_SUBCLASS 0x06 - #define COMMUNICATIONS_ANCM_SUBCLASS 0x07 - -@@ -110,15 +112,22 @@ - #define COMMUNICATIONS_MDLM_SUBCLASS 0x0a - #define COMMUNICATIONS_OBEX_SUBCLASS 0x0b - --/* c.f. CDC 4.6 Table 18 */ -+/* c.f. CDC 4.4 Table 17 */ -+#define COMMUNICATIONS_NO_PROTOCOL 0x00 -+#define COMMUNICATIONS_V25TER_PROTOCOL 0x01 /*Common AT Hayes compatible*/ -+ -+/* c.f. CDC 4.5 Table 18 */ - #define DATA_INTERFACE_CLASS 0x0a - -+/* c.f. CDC 4.6 No Table */ -+#define DATA_INTERFACE_SUBCLASS_NONE 0x00 /* No subclass pertinent */ -+ - /* c.f. CDC 4.7 Table 19 */ --#define COMMUNICATIONS_NO_PROTOCOL 0x00 -+#define DATA_INTERFACE_PROTOCOL_NONE 0x00 /* No class protcol required */ - - - /* c.f. CDC 5.2.3 Table 24 */ --#define CS_INTERFACE 0x24 -+#define CS_INTERFACE 0x24 - #define CS_ENDPOINT 0x25 - - /* -@@ -128,7 +137,7 @@ - * c.f. WMCD 5.3 Table 5.3 - */ - --#define USB_ST_HEADER 0x00 -+#define USB_ST_HEADER 0x00 - #define USB_ST_CMF 0x01 - #define USB_ST_ACMF 0x02 - #define USB_ST_DLMF 0x03 -@@ -137,18 +146,18 @@ - #define USB_ST_UF 0x06 - #define USB_ST_CSF 0x07 - #define USB_ST_TOMF 0x08 --#define USB_ST_USBTF 0x09 -+#define USB_ST_USBTF 0x09 - #define USB_ST_NCT 0x0a - #define USB_ST_PUF 0x0b - #define USB_ST_EUF 0x0c - #define USB_ST_MCMF 0x0d - #define USB_ST_CCMF 0x0e - #define USB_ST_ENF 0x0f --#define USB_ST_ATMNF 0x10 -+#define USB_ST_ATMNF 0x10 - - #define USB_ST_WHCM 0x11 - #define USB_ST_MDLM 0x12 --#define USB_ST_MDLMD 0x13 -+#define USB_ST_MDLMD 0x13 - #define USB_ST_DMM 0x14 - #define USB_ST_OBEX 0x15 - #define USB_ST_CS 0x16 -@@ -312,7 +321,8 @@ - u8 bDescriptorType; - u8 bDescriptorSubtype; /* 0x06 */ - u8 bMasterInterface; -- u8 bSlaveInterface0[0]; -+ //u8 bSlaveInterface0[0]; -+ u8 bSlaveInterface0; - } __attribute__ ((packed)); - - struct usb_class_country_selection_descriptor { -Index: u-boot/include/usbdcore.h -=================================================================== ---- u-boot.orig/include/usbdcore.h 2007-02-08 21:11:27.000000000 +0100 -+++ u-boot/include/usbdcore.h 2007-02-08 21:11:55.000000000 +0100 -@@ -576,6 +576,9 @@ - - void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data); - -+ /* Do cdc device specific control requests */ -+ int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb); -+ - /* bus interface */ - struct usb_bus_instance *bus; /* which bus interface driver */ - -Index: u-boot/drivers/usbdcore_ep0.c -=================================================================== ---- u-boot.orig/drivers/usbdcore_ep0.c 2007-02-08 21:12:05.000000000 +0100 -+++ u-boot/drivers/usbdcore_ep0.c 2007-02-08 21:12:08.000000000 +0100 -@@ -223,7 +223,6 @@ - - case USB_DESCRIPTOR_TYPE_CONFIGURATION: - { -- int bNumInterface; - struct usb_configuration_descriptor - *configuration_descriptor; - struct usb_device_descriptor *device_descriptor; -@@ -256,105 +255,6 @@ - usb_configuration_descriptor), - max); - -- -- /* iterate across interfaces for specified configuration */ -- dbg_ep0 (0, "bNumInterfaces: %d", -- configuration_descriptor->bNumInterfaces); -- for (bNumInterface = 0; -- bNumInterface < -- configuration_descriptor->bNumInterfaces; -- bNumInterface++) { -- -- int bAlternateSetting; -- struct usb_interface_instance -- *interface_instance; -- -- dbg_ep0 (3, "[%d] bNumInterfaces: %d", -- bNumInterface, -- configuration_descriptor->bNumInterfaces); -- -- if (! (interface_instance = usbd_device_interface_instance (device, -- port, index, bNumInterface))) -- { -- dbg_ep0 (3, "[%d] interface_instance NULL", -- bNumInterface); -- return -1; -- } -- /* iterate across interface alternates */ -- for (bAlternateSetting = 0; -- bAlternateSetting < interface_instance->alternates; -- bAlternateSetting++) { -- /*int class; */ -- int bNumEndpoint; -- struct usb_interface_descriptor *interface_descriptor; -- -- struct usb_alternate_instance *alternate_instance; -- -- dbg_ep0 (3, "[%d:%d] alternates: %d", -- bNumInterface, -- bAlternateSetting, -- interface_instance->alternates); -- -- if (! (alternate_instance = usbd_device_alternate_instance (device, port, index, bNumInterface, bAlternateSetting))) { -- dbg_ep0 (3, "[%d] alternate_instance NULL", -- bNumInterface); -- return -1; -- } -- /* copy descriptor for this interface */ -- copy_config (urb, alternate_instance->interface_descriptor, -- sizeof (struct usb_interface_descriptor), -- max); -- -- /*dbg_ep0(3, "[%d:%d] classes: %d endpoints: %d", bNumInterface, bAlternateSetting, */ -- /* alternate_instance->classes, alternate_instance->endpoints); */ -- -- /* iterate across classes for this alternate interface */ --#if 0 -- for (class = 0; -- class < alternate_instance->classes; -- class++) { -- struct usb_class_descriptor *class_descriptor; -- /*dbg_ep0(3, "[%d:%d:%d] classes: %d", bNumInterface, bAlternateSetting, */ -- /* class, alternate_instance->classes); */ -- if (!(class_descriptor = usbd_device_class_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, class))) { -- dbg_ep0 (3, "[%d] class NULL", -- class); -- return -1; -- } -- /* copy descriptor for this class */ -- copy_config (urb, class_descriptor, -- sizeof (struct usb_class_descriptor), -- max); -- } --#endif -- -- /* iterate across endpoints for this alternate interface */ -- interface_descriptor = alternate_instance->interface_descriptor; -- for (bNumEndpoint = 0; -- bNumEndpoint < alternate_instance->endpoints; -- bNumEndpoint++) { -- struct usb_endpoint_descriptor *endpoint_descriptor; -- dbg_ep0 (3, "[%d:%d:%d] endpoint: %d", -- bNumInterface, -- bAlternateSetting, -- bNumEndpoint, -- interface_descriptor-> -- bNumEndpoints); -- if (!(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, bNumEndpoint))) { -- dbg_ep0 (3, "[%d] endpoint NULL", -- bNumEndpoint); -- return -1; -- } -- /* copy descriptor for this endpoint */ -- copy_config (urb, endpoint_descriptor, -- sizeof (struct usb_endpoint_descriptor), -- max); -- } -- } -- } -- dbg_ep0 (3, "lengths: %d %d", -- le16_to_cpu (configuration_descriptor->wTotalLength), -- urb->actual_length); - } - break; - -@@ -363,6 +263,7 @@ - struct usb_string_descriptor *string_descriptor; - - if (!(string_descriptor = usbd_get_string (index))) { -+ dbg_ep0(0, "Invalid string index %u\n", index); - return -1; - } - /*dbg_ep0(3, "string_descriptor: %p", string_descriptor); */ -@@ -495,6 +396,8 @@ - - /* handle USB Standard Request (c.f. USB Spec table 9-2) */ - if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) { -+ if (device->device_state <= STATE_CONFIGURED) -+ return device->cdc_recv_setup(request, urb); - dbg_ep0 (1, "non standard request: %x", - request->bmRequestType & USB_REQ_TYPE_MASK); - return -1; /* Stall here */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/unbusy-i2c.patch b/packages/uboot/u-boot-mkimage-gta01-native/unbusy-i2c.patch deleted file mode 100644 index 680b301620..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/unbusy-i2c.patch +++ /dev/null @@ -1,88 +0,0 @@ -board/neo1973/gta01/gta01.c: added logic to detect pending PMU interrupts -board/neo1973/gta01/gta01.c (neo1973_new_second, neo1973_on_key_pressed): only - poll PMU if there is a pending interrupt -board/neo1973/gta01/pcf50606.c (pcf50606_initial_regs): cleared (unmasked) - SECONDM in INT1M - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/board/neo1973/gta01/gta01.c -=================================================================== ---- u-boot.orig/board/neo1973/gta01/gta01.c -+++ u-boot/board/neo1973/gta01/gta01.c -@@ -375,19 +375,60 @@ - #endif - } - -+static int pwr_int_pending(void) -+{ -+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ -+#if defined(CONFIG_ARCH_GTA01B_v4) -+ return !(gpio->GPGDAT & (1 << 1)); /* EINT9/GPG1 */ -+#else -+ return !(gpio->GPGDAT & (1 << 8)); /* EINT16/GPG8 */ -+#endif /* !CONFIG_ARCH_GTA01B_v4 */ -+} -+ -+static int have_int1(uint8_t mask) -+{ -+ static uint8_t pending = 0; -+ -+ if (pwr_int_pending()) { -+ /* -+ * We retrieve all interupts, so that we clear any stray ones -+ * in INT2 and INT3. -+ */ -+ uint8_t int1,int2,int3; -+ -+ int1 = pcf50606_reg_read(PCF50606_REG_INT1); -+ int2 = pcf50606_reg_read(PCF50606_REG_INT2); -+ int3 = pcf50606_reg_read(PCF50606_REG_INT3); -+ pending |= int1; -+ } -+ if (!(pending & mask)) -+ return 0; -+ pending &= ~mask; -+ return 1; -+} -+ - int neo1973_new_second(void) - { -- return pcf50606_reg_read(PCF50606_REG_INT1) & PCF50606_INT1_SECOND; -+ return have_int1(PCF50606_INT1_SECOND); - } - - int neo1973_on_key_pressed(void) - { -- return !(pcf50606_reg_read(PCF50606_REG_OOCS) & PFC50606_OOCS_ONKEY); -+ static int pressed = -1; -+ -+ if (pressed == -1 || -+ have_int1(PCF50606_INT1_ONKEYF | PCF50606_INT1_ONKEYR)) { -+ pressed = !(pcf50606_reg_read(PCF50606_REG_OOCS) & -+ PFC50606_OOCS_ONKEY); -+} -+ return pressed; - } - - int neo1973_aux_key_pressed(void) - { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); -+ - if (gpio->GPFDAT & (1 << 6)) - return 0; - return 1; -Index: u-boot/board/neo1973/gta01/pcf50606.c -=================================================================== ---- u-boot.orig/board/neo1973/gta01/pcf50606.c -+++ u-boot/board/neo1973/gta01/pcf50606.c -@@ -6,7 +6,7 @@ - const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = { - [PCF50606_REG_OOCS] = 0x00, - /* gap */ -- [PCF50606_REG_INT1M] = PCF50606_INT1_SECOND, -+ [PCF50606_REG_INT1M] = 0x00, - [PCF50606_REG_INT2M] = 0x00, - [PCF50606_REG_INT3M] = PCF50606_INT3_TSCPRES, - [PCF50606_REG_OOCC1] = PCF50606_OOCC1_RTCWAK | diff --git a/packages/uboot/u-boot-mkimage-gta01-native/usbdcore-multiple_configs.patch b/packages/uboot/u-boot-mkimage-gta01-native/usbdcore-multiple_configs.patch deleted file mode 100644 index 339289699a..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/usbdcore-multiple_configs.patch +++ /dev/null @@ -1,63 +0,0 @@ -This patch fixes bugs in usbdcore*.c related to the use of devices -with multiple configurations. - -The original code made mistakes about the meaning of configuration value and -configuration index, and the resulting off-by-one errors resulted in: - -* SET_CONFIGURATION always selected the first configuration, no matter what - wValue is being passed. -* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first - configuration (index 0). - -Signed-off-by: Harald Welte <laforge@openmoko.org> - -Index: u-boot/drivers/usbdcore_ep0.c -=================================================================== ---- u-boot.orig/drivers/usbdcore_ep0.c 2007-03-14 20:29:05.000000000 +0100 -+++ u-boot/drivers/usbdcore_ep0.c 2007-03-14 20:29:06.000000000 +0100 -@@ -233,8 +233,8 @@ - return -1; - } - /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */ -- if (index > device_descriptor->bNumConfigurations) { -- dbg_ep0 (0, "index too large: %d > %d", index, -+ if (index >= device_descriptor->bNumConfigurations) { -+ dbg_ep0 (0, "index too large: %d >= %d", index, - device_descriptor-> - bNumConfigurations); - return -1; -@@ -593,13 +593,8 @@ - - case USB_REQ_SET_CONFIGURATION: - /* c.f. 9.4.7 - the top half of wValue is reserved */ -- /* */ -- if ((device->configuration = -- le16_to_cpu (request->wValue) & 0x7f) != 0) { -- /* c.f. 9.4.7 - zero is the default or addressed state, in our case this */ -- /* is the same is configuration zero */ -- device->configuration = 0; /* TBR - ?????? */ -- } -+ device->configuration = le16_to_cpu(request->wValue) & 0xff; -+ - /* reset interface and alternate settings */ - device->interface = device->alternate = 0; - -Index: u-boot/drivers/usbdcore.c -=================================================================== ---- u-boot.orig/drivers/usbdcore.c 2007-03-14 20:29:05.000000000 +0100 -+++ u-boot/drivers/usbdcore.c 2007-03-14 20:37:37.000000000 +0100 -@@ -147,12 +147,9 @@ - static struct usb_configuration_instance *usbd_device_configuration_instance (struct usb_device_instance *device, - unsigned int port, unsigned int configuration) - { -- /* XXX */ -- configuration = configuration ? configuration - 1 : 0; -- -- if (configuration >= device->configurations) { -+ if (configuration >= device->configurations) - return NULL; -- } -+ - return device->configuration_instance_array + configuration; - } - diff --git a/packages/uboot/u-boot-mkimage-gta01-native/wakeup-reason-nand-only.patch b/packages/uboot/u-boot-mkimage-gta01-native/wakeup-reason-nand-only.patch deleted file mode 100644 index 132a9f8da5..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native/wakeup-reason-nand-only.patch +++ /dev/null @@ -1,68 +0,0 @@ -This patch should get rid of spurious poweroff after booting from RAM. -Experimental. - -cpu/arm920t/start.S: record in global variable "booted_from_nand" whether we - booted from NAND or not -board/neo1973/neo1973.c (board_late_init): if booted from RAM, assume that - wakeup cause was "reset", and skip poweroff check - -- Werner Almesberger <werner@openmoko.org> - -Index: u-boot/board/neo1973/gta01/gta01.c -=================================================================== ---- u-boot.orig/board/neo1973/gta01/gta01.c -+++ u-boot/board/neo1973/gta01/gta01.c -@@ -226,12 +226,16 @@ - - int board_late_init(void) - { -+ extern unsigned char booted_from_nand; - unsigned char tmp; - char buf[32]; - - /* Initialize the Power Management Unit with a safe register set */ - pcf50606_init(); - -+ if (!booted_from_nand) -+ goto woken_by_reset; -+ - /* obtain wake-up reason, save INT1 in environment */ - tmp = pcf50606_reg_read(PCF50606_REG_INT1); - sprintf(buf, "0x%02x", tmp); -@@ -274,6 +278,7 @@ - neo1973_poweroff(); - } - -+woken_by_reset: - /* if there's no other reason, must be regular reset */ - neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; - -Index: u-boot/cpu/arm920t/start.S -=================================================================== ---- u-boot.orig/cpu/arm920t/start.S -+++ u-boot/cpu/arm920t/start.S -@@ -77,6 +77,14 @@ - ************************************************************************* - */ - -+#ifdef CONFIG_S3C2410_NAND_BOOT -+.globl booted_from_nand -+booted_from_nand: -+ .word 0 -+_booted_from_nand: -+ .word booted_from_nand -+#endif /* CONFIG_S3C2410_NAND_BOOT */ -+ - _TEXT_BASE: - .word TEXT_BASE - -@@ -281,6 +289,9 @@ - #endif - 1: b 1b - done_nand_read: -+ ldr r0, _booted_from_nand -+ mov r1, #1 -+ strb r1, [r0] - #endif /* CONFIG_S3C2410_NAND_BOOT */ - done_relocate: - #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native_oe.bb b/packages/uboot/u-boot-mkimage-gta01-native_oe.bb deleted file mode 100644 index 65c413c8d7..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native_oe.bb +++ /dev/null @@ -1,82 +0,0 @@ -require uboot-gta01_svn.bb - -PV = "1.2.0+git9912121f7ed804ea58fd62f3f230b5dcfc357d88svn2238" - -SRC_URI = "git://www.denx.de/git/u-boot.git/;protocol=git;tag=9912121f7ed804ea58fd62f3f230b5dcfc357d88 \ -file://uboot-machtypes.patch;patch=1 \ -file://ext2load_hex.patch;patch=1 \ -file://uboot-mokoversion.patch;patch=1 \ -file://uboot-s3c2410-warnings-fix.patch;patch=1 \ -file://uboot-strtoul.patch;patch=1 \ -file://uboot-cramfs_but_no_jffs2.patch;patch=1 \ -file://nand-read_write_oob.patch;patch=1 \ -file://uboot-arm920t-gd_in_irq.patch;patch=1 \ -file://uboot-arm920_s3c2410_irq_demux.patch;patch=1 \ -file://uboot-s3c2410-nand.patch;patch=1 \ -file://uboot-cmd_s3c2410.patch;patch=1 \ -file://uboot-s3c2410-mmc.patch;patch=1 \ -file://env_nand_oob.patch;patch=1 \ -file://dynenv-harden.patch;patch=1 \ -file://uboot-s3c2410_fb.patch;patch=1 \ -file://uboot-20061030-qt2410.patch;patch=1 \ -file://uboot-20061030-neo1973.patch;patch=1 \ -file://uboot-s3c2410-misccr-definitions.patch;patch=1 \ -file://boot-from-ram-reloc.patch;patch=1 \ -file://boot-from-ram-and-nand.patch;patch=1 \ -file://wakeup-reason-nand-only.patch;patch=1 \ -file://uboot-neo1973-resume.patch;patch=1 \ -file://nand-dynamic_partitions.patch;patch=1 \ -file://uboot-s3c2410-norelocate_irqvec_cpy.patch;patch=1 \ -file://uboot-usbtty-acm.patch;patch=1 \ -file://uboot-s3c2410_udc.patch;patch=1 \ -file://bbt-create-optional.patch;patch=1 \ -file://nand-createbbt.patch;patch=1 \ -file://dontask.patch;patch=1 \ -file://nand-badisbad.patch;patch=1 \ -file://uboot-bbt-quiet.patch;patch=1 \ -file://raise-limits.patch;patch=1 \ -file://splashimage-command.patch;patch=1 \ -file://cmd-unzip.patch;patch=1 \ -file://enable-splash-bmp.patch;patch=1 \ -file://preboot-override.patch;patch=1 \ -file://lowlevel_foo.patch;patch=1 \ -file://default-env.patch;patch=1 \ -file://console-ansi.patch;patch=1 \ -file://boot-menu.patch;patch=1 \ -file://uboot-dfu.patch;patch=1 \ -file://uboot-neo1973-defaultenv.patch;patch=1 \ -file://uboot-nand-markbad-reallybad.patch;patch=1 \ -file://usbdcore-multiple_configs.patch;patch=1 \ -file://neo1973-chargefast.patch;patch=1 \ -file://uboot-s3c2440.patch;patch=1 \ -file://uboot-smdk2440.patch;patch=1 \ -file://uboot-hxd8.patch;patch=1 \ -file://uboot-license.patch;patch=1 \ -file://uboot-gta02.patch;patch=1 \ -file://uboot-s3c2443.patch;patch=1 \ -file://uboot-smdk2443.patch;patch=1 \ -file://unbusy-i2c.patch;patch=1 \ -" - -PROVIDES = "" -TARGET_LDFLAGS = "" - -do_quilt() { -: -} - -do_compile () { - chmod +x board/neo1973/gta01/split_by_variant.sh - oe_runmake gta01bv3_config - oe_runmake clean - oe_runmake tools -} - -do_deploy () { - install -m 0755 tools/mkimage ${STAGING_BINDIR_NATIVE}/uboot-mkimage -} - -do_deploy[dirs] = "${S}" -addtask deploy before do_package after do_install - - diff --git a/packages/uboot/u-boot-mkimage-gta01-native_svn.bb b/packages/uboot/u-boot-mkimage-gta01-native_svn.bb deleted file mode 100644 index 90b3bbef5a..0000000000 --- a/packages/uboot/u-boot-mkimage-gta01-native_svn.bb +++ /dev/null @@ -1,20 +0,0 @@ -require uboot-gta01_svn.bb - -DEFAULT_PREFERENCE = "-1" - -PROVIDES = "" -TARGET_LDFLAGS = "" - -do_compile () { - chmod +x board/neo1973/gta01/split_by_variant.sh - oe_runmake gta01bv3_config - oe_runmake clean - oe_runmake tools -} - -do_deploy () { - install -m 0755 tools/mkimage ${STAGING_BINDIR_NATIVE}/uboot-mkimage -} - -do_deploy[dirs] = "${S}" -addtask deploy before do_package after do_install diff --git a/packages/uboot/uboot-gta01_svn.bb b/packages/uboot/uboot-gta01_svn.bb index d026efccc1..2cf50c78bd 100644 --- a/packages/uboot/uboot-gta01_svn.bb +++ b/packages/uboot/uboot-gta01_svn.bb @@ -4,55 +4,79 @@ LICENSE = "GPL" SECTION = "bootloader" PRIORITY = "optional" PV = "1.2.0+svn${SRCDATE}" -PR = "r3" +PR = "r10" PROVIDES = "virtual/bootloader" S = "${WORKDIR}/git" SRC_URI = "git://www.denx.de/git/u-boot.git/;protocol=git \ svn://svn.openmoko.org/trunk/src/target/u-boot;module=patches;proto=http \ - file://fix-arm920t-eabi.patch;patch=1" + file://uboot-eabi-fix-HACK.patch \ + file://uboot-20070311-tools_makefile_ln_sf.patch;patch=1 \ +" EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}" TARGET_LDFLAGS = "" -UBOOT_MACHINES = "gta01v3 gta01v4 gta01bv2 gta01bv3" +UBOOT_MACHINES = "gta01bv2 gta01bv3 gta01bv4 smdk2440 hxd8 qt2410 gta02v1" do_quilt() { - mv ${WORKDIR}/patches ${S}/patches - cd ${S} - quilt push -av + mv ${WORKDIR}/patches ${S}/patches && cd ${S} && quilt push -av rm -Rf patches .pc } +do_svnrev() { + FILE=${S}/tools/setlocalversion + OLDFILE=$FILE.old + NEWFILE=$FILE.new + cp $FILE $OLDFILE + LINES=`cat $OLDFILE | wc -l` + LINES_WE_WANT=$(($LINES-1)) + LASTLINE=`cat $OLDFILE | tail -n 1` + cat $OLDFILE | head -n $LINES_WE_WANT > $NEWFILE + echo ${LASTLINE}_${PR} >> $NEWFILE + rm $FILE && mv $NEWFILE $FILE +} + +do_configure_prepend() { + find . -name "*.mk" -exec sed -i 's,-mabi=apcs-gnu,,' {} \; + find . -name "Makefile" -exec sed -i 's,-mabi=apcs-gnu,,' {} \; + cat ${WORKDIR}/uboot-eabi-fix-HACK.patch |patch -p1 +} + do_compile () { - chmod +x board/neo1973/split_by_variant.sh - for type in ram nand + chmod +x board/neo1973/gta*/split_by_variant.sh + for mach in ${UBOOT_MACHINES} do - for mach in ${UBOOT_MACHINES} - do - oe_runmake ${mach}_config - oe_runmake clean - if [ ${type} == "ram" ]; then - echo 'PLATFORM_RELFLAGS += -DBUILD_FOR_RAM' >> board/neo1973/config.tmp - fi - oe_runmake all - mv u-boot.bin u-boot_${mach}_${type}.bin - done + oe_runmake ${mach}_config + oe_runmake clean + oe_runmake all + oe_runmake u-boot.udfu + if [ -f u-boot.udfu ]; then + mv u-boot.udfu u-boot_${mach}.bin + else + mv u-boot.bin u-boot_${mach}.bin + fi + if [ -f board/${mach}/lowlevel_foo.bin ]; then + mv board/${mach}/lowlevel_foo.bin lowlevel_foo_${mach}.bin + fi done } do_deploy () { install -d ${DEPLOY_DIR_IMAGE} - for type in nand ram + for mach in ${UBOOT_MACHINES} do - for mach in ${UBOOT_MACHINES} - do - install ${S}/u-boot_${mach}_${type}.bin ${DEPLOY_DIR_IMAGE}/u-boot_${type}-${mach}-${DATETIME}.bin - done + install ${S}/u-boot_${mach}.bin \ + ${DEPLOY_DIR_IMAGE}/u-boot-${mach}-${PR}.bin + if [ -f ${S}/lowlevel_foo_${mach}.bin ]; then + install ${S}/lowlevel_foo_${mach}.bin \ + ${DEPLOY_DIR_IMAGE}/lowlevel_foo-${mach}-${PR}.bin + fi done install -m 0755 tools/mkimage ${STAGING_BINDIR_NATIVE}/uboot-mkimage } do_deploy[dirs] = "${S}" -addtask deploy before do_build after do_compile +addtask deploy before do_package after do_install addtask quilt before do_patch after do_unpack +addtask svnrev before do_patch after do_quilt diff --git a/packages/uboot/uboot-qt2410_0.0+cvs20061030.bb b/packages/uboot/uboot-qt2410_0.0+cvs20061030.bb deleted file mode 100644 index 102030f147..0000000000 --- a/packages/uboot/uboot-qt2410_0.0+cvs20061030.bb +++ /dev/null @@ -1,41 +0,0 @@ -DESCRIPTION = "U-boot bootloader w/ armzone qt2410 support" -SECTION = "bootloader" -PRIORITY = "optional" -LICENSE = "GPL" -SRCDATE := "${PV}" -PR = "r0" - -PROVIDES = "virtual/bootloader" -S = "${WORKDIR}/git" - -SRC_URI = "git://www.denx.de/git/u-boot.git/;protocol=git \ - file://u-boot-20061030-qt2410-gta01.patch;patch=1 \ - file://qt2410_*.h" - -EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}" -TARGET_LDFLAGS = "" -UBOOT_MACHINE = "qt2410_config" - -inherit base - -do_compile () { - for type in nand ram - do - install -m 0644 ${WORKDIR}/qt2410_${type}.h include/configs/qt2410.h - oe_runmake ${UBOOT_MACHINE} - oe_runmake all - mv u-boot.bin u-boot_$type.bin - done -} - -do_deploy () { - install -d ${DEPLOY_DIR_IMAGE} - for type in nand ram - do - install ${S}/u-boot_$type.bin ${DEPLOY_DIR_IMAGE}/u-boot_$type-${MACHINE}-${DATETIME}.bin - done - install -m 0755 tools/mkimage ${STAGING_BINDIR}/uboot-mkimage -} - -do_deploy[dirs] = "${S}" -addtask deploy before do_build after do_compile |