diff options
Diffstat (limited to 'packages')
4 files changed, 174 insertions, 29 deletions
diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-io.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-io.c index a15a305439..8e3ca894c4 100644 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-io.c +++ b/packages/linux/openslug-kernel-2.6.11.2/nslu2-io.c @@ -47,6 +47,7 @@ #include <linux/interrupt.h> #include <linux/moduleparam.h> #include <linux/timer.h> +#include <linux/reboot.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -298,10 +299,10 @@ static void n2lm_ledon(unsigned long led) *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 return; case LED_DISK1: - *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffffb + *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 return; case LED_DISK2: - *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffff7 + *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb return; case LED_ALL: //all green *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; @@ -323,10 +324,10 @@ static void n2lm_ledoff(unsigned long led) *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd return; case LED_DISK1: - *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000004 + *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 return; case LED_DISK2: - *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000008 + *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 return; case LED_ALL: *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); @@ -512,8 +513,7 @@ static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) // message, do an orderly shutdown and use an ioctl or something in // /proc/powerdowm to actually have us pull the plug. - *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio - *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed + machine_power_off(); return IRQ_HANDLED; } @@ -543,27 +543,27 @@ static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) { static struct testr test[] = { - N2LM_ALL_OFF,0, - N2LM_ON,0, - N2LM_OFF,0, - N2LM_ON,1, - N2LM_ALL_OFF,1, - N2LM_ON,2, - N2LM_OFF,2, - N2LM_ON,3, - N2LM_OFF,3, - N2LM_BLINK,0, - N2LM_OFF,0, - N2LM_BLINK,1, - N2LM_OFF,1, - N2LM_BLINK,2, - N2LM_OFF,2, - N2LM_BLINK,3, - N2LM_OFF,3, - N2LM_ALL_OFF,0, - N2LM_ALT,1, - N2LM_OFF,1, - N2LM_ALL_ON,0 + { N2LM_ALL_OFF,0 }, + { N2LM_ON,0 }, + { N2LM_OFF,0 }, + { N2LM_ON,1 }, + { N2LM_ALL_OFF,1 }, + { N2LM_ON,2 }, + { N2LM_OFF,2 }, + { N2LM_ON,3 }, + { N2LM_OFF,3 }, + { N2LM_BLINK,0 }, + { N2LM_OFF,0 }, + { N2LM_BLINK,1 }, + { N2LM_OFF,1 }, + { N2LM_BLINK,2 }, + { N2LM_OFF,2 }, + { N2LM_BLINK,3 }, + { N2LM_OFF,3 }, + { N2LM_ALL_OFF,0 }, + { N2LM_ALT,1 }, + { N2LM_OFF,1 }, + { N2LM_ALL_ON,0 } }; nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c index e69de29bb2..358c58f22e 100644 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c +++ b/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c @@ -0,0 +1,144 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-setup.c + * + * NSLU2 board-setup + * + * based ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Author: Mark Rakes <mrakes at mac.com> + * Maintainers: http://www.nslu2-linux.org/ + * + * Fixed missing init_time in MACHINE_START kas11 10/22/04 + * Changed to conform to new style __init ixdp425 kas11 10/22/04 + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#ifdef __ARMEB__ +#define REG_OFFSET 3 +#else +#define REG_OFFSET 0 +#endif + +/* + * NSLU2 uses only one serial port + */ +static struct uart_port nslu2_serial_ports[] = { + { + .membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET), + .mapbase = (IXP4XX_UART1_BASE_PHYS), + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + .line = 0, + .type = PORT_XSCALE, + .fifosize = 32 + } +#if 0 + , { + .membase = (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET), + .mapbase = (IXP4XX_UART2_BASE_PHYS), + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + .line = 1, + .type = PORT_XSCALE, + .fifosize = 32 + } +#endif +}; + +void __init nslu2_map_io(void) +{ + early_serial_setup(&nslu2_serial_ports[0]); +#if 0 + early_serial_setup(&nslu2_serial_ports[1]); +#endif + ixp4xx_map_io(); +} + +static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nslu2_flash_resource = { + .start = NSLU2_FLASH_BASE, + .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nslu2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &nslu2_flash_data, + }, + .num_resources = 1, + .resource = &nslu2_flash_resource, +}; + +static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { + .sda_pin = NSLU2_SDA_PIN, + .scl_pin = NSLU2_SCL_PIN, +}; + +static struct platform_device nslu2_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev = { + .platform_data = &nslu2_i2c_gpio_pins, + }, + .num_resources = 0 +}; + +static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash +}; + +static void n2_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ +#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 + *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio + *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed +} + +static void __init nslu2_init(void) +{ + /* Need power off to work. */ + pm_power_off = n2_power_off; + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); +} + +MACHINE_START(NSLU2, "Linksys NSLU2") + MAINTAINER("www.nslu2-linux.org") + BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, + IXP4XX_PERIPHERAL_BASE_VIRT) + MAPIO(nslu2_map_io) + INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here + .timer = &ixp4xx_timer, + // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? + BOOT_PARAMS(0x0100) + INIT_MACHINE(nslu2_init) +MACHINE_END diff --git a/packages/linux/openslug-kernel-2.6.11.2/xscale-reset.patch b/packages/linux/openslug-kernel-2.6.11.2/xscale-reset.patch new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/openslug-kernel-2.6.11.2/xscale-reset.patch diff --git a/packages/linux/openslug-kernel_2.6.11.2.bb b/packages/linux/openslug-kernel_2.6.11.2.bb index b604e27ad8..476bea31b8 100644 --- a/packages/linux/openslug-kernel_2.6.11.2.bb +++ b/packages/linux/openslug-kernel_2.6.11.2.bb @@ -2,7 +2,7 @@ SECTION = "kernel" DESCRIPTION = "Linux kernel for the Linksys NSLU2 device" LICENSE = "GPL" MAINTAINER = "Chris Larson <kergoth@handhelds.org>" -PR = "r11" +PR = "r12" KERNEL_SUFFIX = "openslug" @@ -11,6 +11,7 @@ SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.11.2.tar.bz2 \ file://usbnet.patch;patch=1 \ file://ixp4xx_copy_from.patch;patch=1 \ file://anonymiser.patch;patch=1 \ + file://xscale-reset.patch;patch=1 \ file://defconfig \ file://x1205-rtc.c \ file://nslu2-io.c \ @@ -27,7 +28,7 @@ inherit kernel ARCH = "arm" KERNEL_IMAGETYPE = "zImage" CMDLINE_CONSOLE ?= "ttyS0,115200n8" -CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc" +CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc reboot=s" #CMDLINE_ROOT ?= "root=/dev/ram0 rw rootfstype=ext2,jffs2 initrd=0x01000000,10M init=/linuxrc mem=32M@0x00000000" CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_CONSOLE}" |