diff options
Diffstat (limited to 'packages/wpa-supplicant')
| -rw-r--r-- | packages/wpa-supplicant/files/defaults-gnutls | 8 | ||||
| -rw-r--r-- | packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls | 499 | ||||
| -rw-r--r-- | packages/wpa-supplicant/wpa-supplicant_0.5.1.bb | 25 |
3 files changed, 32 insertions, 500 deletions
diff --git a/packages/wpa-supplicant/files/defaults-gnutls b/packages/wpa-supplicant/files/defaults-gnutls new file mode 100644 index 0000000000..67c4cbddf8 --- /dev/null +++ b/packages/wpa-supplicant/files/defaults-gnutls @@ -0,0 +1,8 @@ +# Useful flags: +# -i <ifname> Interface (required, unless specified in config) +# -D <driver> Wireless Driver +# -d Debugging (-dd for more) +# -q Quiet (-qq for more) + +CONFIG="/etc/wpa_supplicant.conf" +OPTIONS="-i eth1 -D wext" diff --git a/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls b/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls index da407b5ef3..c91ffe0c84 100644 --- a/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls +++ b/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls @@ -1,502 +1,7 @@ -##### Example wpa_supplicant configuration file ############################### -# Empty lines and lines starting with # are ignored - -# NOTE! This file may contain password information and should probably be made -# readable only by root user on multiuser systems. - -# global configuration (shared by all network blocks) -# -# Interface for separate control program. If this is specified, wpa_supplicant -# will create this directory and a UNIX domain socket for listening to requests -# from external programs (CLI/GUI, etc.) for status information and -# configuration. The socket file will be named based on the interface name, so -# multiple wpa_supplicant processes can be run at the same time if more than -# one interface is used. -# /var/run/wpa_supplicant is the recommended directory for sockets and by -# default, wpa_cli will use it when trying to connect with wpa_supplicant. ctrl_interface=/var/run/wpa_supplicant - -# Access control for the control interface can be configured by setting the -# directory to allow only members of a group to use sockets. This way, it is -# possible to run wpa_supplicant as root (since it needs to change network -# configuration and open raw sockets) and still allow GUI/CLI components to be -# run as non-root users. However, since the control interface can be used to -# change the network configuration, this access needs to be protected in many -# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you -# want to allow non-root users to use the control interface, add a new group -# and change this value to match with that group. Add users that should have -# control interface access to this group. If this variable is commented out or -# not included in the configuration file, group will not be changed from the -# value it got by default when the directory or socket was created. -# -# This variable can be a group name or gid. -#ctrl_interface_group=wheel ctrl_interface_group=0 +update_config=1 -# IEEE 802.1X/EAPOL version -# wpa_supplicant was implemented based on IEEE 802-1X-REV-d8 which defines -# EAPOL version 2. However, there are many APs that do not handle the new -# version number correctly (they seem to drop the frames completely). In order -# to make wpa_supplicant interoperate with these APs, the version number is set -# to 1 by default. This configuration value can be used to set it to the new -# version (2). -eapol_version=1 - -# AP scanning/selection -# By default, wpa_supplicant requests driver to perform AP scanning and then -# uses the scan results to select a suitable AP. Another alternative is to -# allow the driver to take care of AP scanning and selection and use -# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association -# information from the driver. -# 1: wpa_supplicant initiates scanning and AP selection -# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association -# parameters (e.g., WPA IE generation); this mode can also be used with -# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with -# APs (i.e., external program needs to control association) -# 2: like 0, but associate with APs using security policy and SSID (but not -# BSSID); this can be used, e.g., with ndiswrapper and NDIS driver to -# enable operation with hidden SSIDs and optimized roaming; in this mode, -# only the first network block in the configuration file is used and this -# configuration should have explicit security policy (i.e., only one option -# in the lists) for key_mgmt, pairwise, group, proto variables -ap_scan=1 - -# EAP fast re-authentication -# By default, fast re-authentication is enabled for all EAP methods that -# support it. This variable can be used to disable fast re-authentication. -# Normally, there is no need to disable this. -fast_reauth=1 - -# network block -# -# Each network (usually AP's sharing the same SSID) is configured as a separate -# block in this configuration file. The network blocks are in preference order -# (the first match is used). -# -# network block fields: -# -# ssid: SSID (mandatory); either as an ASCII string with double quotation or -# as hex string; network name -# -# scan_ssid: -# 0 = do not scan this SSID with specific Probe Request frames (default) -# 1 = scan with SSID-specific Probe Request frames (this can be used to -# find APs that do not accept broadcast SSID or use multiple SSIDs; -# this will add latency to scanning, so enable this only when needed) -# -# bssid: BSSID (optional); if set, this network block is used only when -# associating with the AP using the configured BSSID -# -# priority: priority group (integer) -# By default, all networks will get same priority group (0). If some of the -# networks are more desirable, this field can be used to change the order in -# which wpa_supplicant goes through the networks when selecting a BSS. The -# priority groups will be iterated in decreasing priority (i.e., the larger the -# priority value, the sooner the network is matched against the scan results). -# Within each priority group, networks will be selected based on security -# policy, signal strength, etc. -# Please note that AP scanning with scan_ssid=1 is not using this priority to -# select the order for scanning. Instead, it uses the order the networks are in -# the configuration file. -# -# mode: IEEE 802.11 operation mode -# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) -# 1 = IBSS (ad-hoc, peer-to-peer) -# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) -# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has -# to be set to 2 for IBSS. WPA-None requires following network block options: -# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not -# both), and psk must also be set. -# -# proto: list of accepted protocols -# WPA = WPA/IEEE 802.11i/D3.0 -# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) -# If not set, this defaults to: WPA RSN -# -# key_mgmt: list of accepted authenticated key management protocols -# WPA-PSK = WPA pre-shared key (this requires 'psk' field) -# WPA-EAP = WPA using EAP authentication (this can use an external -# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication -# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically -# generated WEP keys -# NONE = WPA is not used; plaintext or static WEP could be used -# If not set, this defaults to: WPA-PSK WPA-EAP -# -# auth_alg: list of allowed IEEE 802.11 authentication algorithms -# OPEN = Open System authentication (required for WPA/WPA2) -# SHARED = Shared Key authentication (requires static WEP keys) -# LEAP = LEAP/Network EAP (only used with LEAP) -# If not set, automatic selection is used (Open System with LEAP enabled if -# LEAP is allowed as one of the EAP methods). -# -# pairwise: list of accepted pairwise (unicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# NONE = Use only Group Keys (deprecated, should not be included if APs support -# pairwise keys) -# If not set, this defaults to: CCMP TKIP -# -# group: list of accepted group (broadcast/multicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key -# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] -# If not set, this defaults to: CCMP TKIP WEP104 WEP40 -# -# psk: WPA preshared key; 256-bit pre-shared key -# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., -# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be -# generated using the passphrase and SSID). ASCII passphrase must be between -# 8 and 63 characters (inclusive). -# This field is not needed, if WPA-EAP is used. -# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys -# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant -# startup and reconfiguration time can be optimized by generating the PSK only -# only when the passphrase or SSID has actually changed. -# -# eapol_flags: IEEE 802.1X/EAPOL options (bit field) -# Dynamic WEP key require for non-WPA mode -# bit0 (1): require dynamically generated unicast WEP key -# bit1 (2): require dynamically generated broadcast WEP key -# (3 = require both keys; default) -# -# Following fields are only used with internal EAP implementation. -# eap: space-separated list of accepted EAP methods -# MD5 = EAP-MD5 (unsecure and does not generate keying material -> -# cannot be used with WPA; to be used as a Phase 2 method -# with EAP-PEAP or EAP-TTLS) -# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# OTP = EAP-OTP (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# GTC = EAP-GTC (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# TLS = EAP-TLS (client and server certificate) -# PEAP = EAP-PEAP (with tunnelled EAP authentication) -# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 -# authentication) -# If not set, all compiled in methods are allowed. -# -# identity: Identity string for EAP -# anonymous_identity: Anonymous identity string for EAP (to be used as the -# unencrypted identity with EAP types that support different tunnelled -# identity, e.g., EAP-TTLS) -# password: Password string for EAP -# ca_cert: File path to CA certificate file. This file can have one or more -# trusted CA certificates. If ca_cert is not included, server certificate -# will not be verified. This is insecure and the CA file should always be -# configured. -# client_cert: File path to client certificate file (PEM/DER) -# private_key: File path to client private key file (PEM/DER/PFX) -# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be -# commented out. Both the private key and certificate will be read from -# the PKCS#12 file in this case. -# private_key_passwd: Password for private key file -# dh_file: File path to DH/DSA parameters file (in PEM format) -# This is an optional configuration file for setting parameters for an -# ephemeral DH key exchange. In most cases, the default RSA -# authentication does not use this configuration. However, it is possible -# setup RSA to use ephemeral DH key exchange. In addition, ciphers with -# DSA keys always use ephemeral DH keys. This can be used to achieve -# forward secrecy. If the file is in DSA parameters format, it will be -# automatically converted into DH params. -# subject_match: Substring to be matched against the subject of the -# authentication server certificate. If this string is set, the server -# sertificate is only accepted if it contains this string in the subject. -# The subject string is in following format: -# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com -# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters -# (string with field-value pairs, e.g., "peapver=0" or -# "peapver=1 peaplabel=1") -# 'peapver' can be used to force which PEAP version (0 or 1) is used. -# 'peaplabel=1' can be used to force new label, "client PEAP encryption", -# to be used during key derivation when PEAPv1 or newer. Most existing -# PEAPv1 implementation seem to be using the old label, "client EAP -# encryption", and wpa_supplicant is now using that as the default value. -# Some servers, e.g., Radiator, may require peaplabel=1 configuration to -# interoperate with PEAPv1; see eap_testing.txt for more details. -# 'peap_outer_success=0' can be used to terminate PEAP authentication on -# tunneled EAP-Success. This is required with some RADIUS servers that -# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., -# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) -# sim_min_num_chal=3 can be used to configure EAP-SIM to require three -# challenges (by default, it accepts 2 or 3) -# phase2: Phase2 (inner authentication with TLS tunnel) parameters -# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or -# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) -# Following certificate/private key fields are used in inner Phase2 -# authentication when using EAP-TTLS or EAP-PEAP. -# ca_cert2: File path to CA certificate file. This file can have one or more -# trusted CA certificates. If ca_cert2 is not included, server -# certificate will not be verified. This is insecure and the CA file -# should always be configured. -# client_cert2: File path to client certificate file -# private_key2: File path to client private key file -# private_key2_passwd: Password for private key file -# dh_file2: File path to DH/DSA parameters file (in PEM format) -# subject_match2: Substring to be matched against the subject of the -# authentication server certificate. -# -# EAP-PSK variables: -# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format -# nai: user NAI -# server_nai: authentication server NAI -# -# EAP-FAST variables: -# pac_file: File path for the PAC entries. wpa_supplicant will need to be able -# to create this file and write updates to it when PAC is being -# provisioned or refreshed. -# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST -# credentials (PAC) -# -# wpa_supplicant supports number of "EAP workarounds" to work around -# interoperability issues with incorrectly behaving authentication servers. -# These are enabled by default because some of the issues are present in large -# number of authentication servers. Strict EAP conformance mode can be -# configured by disabling workarounds with eap_workaround=0. - -# Example blocks: - -# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers -network={ - ssid="simple" - psk="very secret passphrase" - priority=5 -} - -# Same as previous, but request SSID-specific scanning (for APs that reject -# broadcast SSID) -network={ - ssid="second ssid" - scan_ssid=1 - psk="very secret passphrase" - priority=2 -} - -# Only WPA-PSK is used. Any valid cipher combination is accepted. -network={ - ssid="example" - proto=WPA - key_mgmt=WPA-PSK - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb - priority=2 -} - -# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 -# or WEP40 as the group cipher will not be accepted. -network={ - ssid="example" - proto=RSN - key_mgmt=WPA-EAP - pairwise=CCMP TKIP - group=CCMP TKIP - eap=TLS - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - priority=1 -} - -# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel -# (e.g., Radiator) -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=PEAP - identity="user@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - phase1="peaplabel=1" - phase2="auth=MSCHAPV2" - priority=10 -} - -# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the -# unencrypted use. Real identity is sent only within an encrypted TLS tunnel. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - priority=2 -} - -# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted -# use. Real identity is sent only within an encrypted TLS tunnel. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - phase2="auth=MSCHAPV2" -} - -# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner -# authentication. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - # Phase1 / outer authentication - anonymous_identity="anonymous@example.com" - ca_cert="/etc/cert/ca.pem" - # Phase 2 / inner authentication - phase2="autheap=TLS" - ca_cert2="/etc/cert/ca2.pem" - client_cert2="/etc/cer/user.pem" - private_key2="/etc/cer/user.prv" - private_key2_passwd="password" - priority=2 -} - -# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and -# group cipher. -network={ - ssid="example" - bssid=00:11:22:33:44:55 - proto=WPA RSN - key_mgmt=WPA-PSK WPA-EAP - pairwise=CCMP - group=CCMP - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb -} - -# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP -# and all valid ciphers. -network={ - ssid=00010203 - psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f -} - - -# EAP-SIM with a GSM SIM or USIM -network={ - ssid="eap-sim-test" - key_mgmt=WPA-EAP - eap=SIM - pin="1234" - pcsc="" -} - - -# EAP-PSK -network={ - ssid="eap-psk-test" - key_mgmt=WPA-EAP - eap=PSK - identity="eap_psk_user" - eappsk=06b4be19da289f475aa46a33cb793029 - nai="eap_psk_user@example.com" - server_nai="as@example.com" -} - - -# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using -# EAP-TLS for authentication and key generation; require both unicast and -# broadcast WEP keys. -network={ - ssid="1x-test" - key_mgmt=IEEE8021X - eap=TLS - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - eapol_flags=3 -} - - -# LEAP with dynamic WEP keys -network={ - ssid="leap-example" - key_mgmt=IEEE8021X - eap=LEAP - identity="user" - password="foobar" -} - -# EAP-FAST with WPA (WPA or WPA2) -network={ - ssid="eap-fast-test" - key_mgmt=WPA-EAP - eap=FAST - anonymous_identity="FAST-000102030405" - identity="username" - password="password" - phase1="fast_provisioning=1" - pac_file="/etc/wpa_supplicant.eap-fast-pac" -} - -# Plaintext connection (no WPA, no IEEE 802.1X) -network={ - ssid="plaintext-test" - key_mgmt=NONE -} - - -# Shared WEP key connection (no WPA, no IEEE 802.1X) -network={ - ssid="static-wep-test" - key_mgmt=NONE - wep_key0="abcde" - wep_key1=0102030405 - wep_key2="1234567890123" - wep_tx_keyidx=0 - priority=5 -} - - -# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key -# IEEE 802.11 authentication -network={ - ssid="static-wep-test2" - key_mgmt=NONE - wep_key0="abcde" - wep_key1=0102030405 - wep_key2="1234567890123" - wep_tx_keyidx=0 - priority=5 - auth_alg=SHARED -} - - -# IBSS/ad-hoc network with WPA-None/TKIP. -network={ - ssid="test adhoc" - mode=1 - proto=WPA - key_mgmt=WPA-NONE - pairwise=NONE - group=TKIP - psk="secret passphrase" -} - - -# Catch all example that allows more or less all configuration modes network={ - ssid="example" - scan_ssid=1 - key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 - psk="very secret passphrase" - eap=TTLS PEAP TLS - identity="user@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - phase1="peaplabel=0" + key_mgmt=NONE } diff --git a/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb b/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb index 05d82cd892..67e5c421ca 100644 --- a/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb +++ b/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb @@ -4,13 +4,26 @@ LICENSE = "GPL" MAINTAINER = "Holger Schurig" HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/" DEPENDS = "gnutls" +PR = "r1" SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \ file://defconfig-gnutls \ + file://init.sh \ + file://defaults-gnutls \ file://wpa_supplicant.conf-gnutls" S = "${WORKDIR}/wpa_supplicant-${PV}" +PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli" +FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase" +FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli" + +RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli" + +INITSCRIPT_NAME = "wpa" +INITSCRIPT_PARAMS = "defaults 10" +inherit update-rc.d + do_configure () { install -m 0755 ${WORKDIR}/defconfig-gnutls .config } @@ -25,9 +38,15 @@ do_install () { install -m755 wpa_passphrase ${D}${sbindir} install -m755 wpa_cli ${D}${sbindir} - install -d ${D}${sysconfdir} - install -m644 ${WORKDIR}/wpa_supplicant.conf-gnutls ${D}${sysconfdir}/wpa_supplicant.conf + install -d ${D}${localstatedir}/run/wpa_supplicant install -d ${D}${docdir}/wpa_supplicant - install -m644 README ${D}${docdir}/wpa_supplicant + install -m644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant + + install -d ${D}${sysconfdir}/init.d + install -m700 ${WORKDIR}/init.sh ${D}${sysconfdir}/init.d/wpa + + install -d ${D}${sysconfdir}/default + install -m600 ${WORKDIR}/defaults-gnutls ${D}${sysconfdir}/default/wpa + install -m600 ${WORKDIR}/wpa_supplicant.conf-gnutls ${D}${sysconfdir}/wpa_supplicant.conf } |