summaryrefslogtreecommitdiff
path: root/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch
diff options
context:
space:
mode:
Diffstat (limited to 'packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch')
-rw-r--r--packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch1233
1 files changed, 1233 insertions, 0 deletions
diff --git a/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch b/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch
new file mode 100644
index 0000000000..343598902f
--- /dev/null
+++ b/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch
@@ -0,0 +1,1233 @@
+This patch adds 'board' support for the Armzone QT2410
+development board to u-boot.
+
+Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -2009,6 +2009,9 @@
+ sbc2410x_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
+
++qt2410_config : unconfig
++ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
++
+ scb9328_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
+
+Index: u-boot/board/qt2410/Makefile
+===================================================================
+--- /dev/null
++++ u-boot/board/qt2410/Makefile
+@@ -0,0 +1,47 @@
++#
++# (C) Copyright 2000, 2001, 2002
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = lib$(BOARD).a
++
++OBJS := qt2410.o flash.o
++SOBJS := lowlevel_init.o
++
++$(LIB): $(OBJS) $(SOBJS)
++ $(AR) crv $@ $(OBJS) $(SOBJS)
++
++clean:
++ rm -f $(SOBJS) $(OBJS)
++
++distclean: clean
++ rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
++
++-include .depend
++
++#########################################################################
+Index: u-boot/board/qt2410/config.mk
+===================================================================
+--- /dev/null
++++ u-boot/board/qt2410/config.mk
+@@ -0,0 +1,29 @@
++#
++# (C) Copyright 2002
++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
++#
++# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
++#
++# see http://www.samsung.com/ for more information on SAMSUNG
++#
++
++CONFIG_USB_DFU_VENDOR=0x1457
++CONFIG_USB_DFU_PRODUCT=0x511d
++CONFIG_USB_DFU_REVISION=0x0100
++
++#
++# SMDK2410 has 1 bank of 64 MB DRAM
++#
++# 3000'0000 to 3400'0000
++#
++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
++# optionally with a ramdisk at 3080'0000
++#
++# we load ourself to 33F8'0000
++#
++# download area is 3300'0000
++#
++
++
++TEXT_BASE = 0x33F80000
+Index: u-boot/board/qt2410/flash.c
+===================================================================
+--- /dev/null
++++ u-boot/board/qt2410/flash.c
+@@ -0,0 +1,435 @@
++/*
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Alex Zuepke <azu@sysgo.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++
++ulong myflush (void);
++
++
++#define FLASH_BANK_SIZE PHYS_FLASH_SIZE
++#define MAIN_SECT_SIZE 0x10000 /* 64 KB */
++
++flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
++
++
++#define CMD_READ_ARRAY 0x000000F0
++#define CMD_UNLOCK1 0x000000AA
++#define CMD_UNLOCK2 0x00000055
++#define CMD_ERASE_SETUP 0x00000080
++#define CMD_ERASE_CONFIRM 0x00000030
++#define CMD_PROGRAM 0x000000A0
++#define CMD_UNLOCK_BYPASS 0x00000020
++
++#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
++#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
++
++#define BIT_ERASE_DONE 0x00000080
++#define BIT_RDY_MASK 0x00000080
++#define BIT_PROGRAM_ERROR 0x00000020
++#define BIT_TIMEOUT 0x80000000 /* our flag */
++
++#define READY 1
++#define ERR 2
++#define TMO 4
++
++/*-----------------------------------------------------------------------
++ */
++
++ulong flash_init (void)
++{
++ int i, j;
++ ulong size = 0;
++
++ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
++ ulong flashbase = 0;
++
++ flash_info[i].flash_id =
++#if defined(CONFIG_AMD_LV400)
++ (AMD_MANUFACT & FLASH_VENDMASK) |
++ (AMD_ID_LV400B & FLASH_TYPEMASK);
++#elif defined(CONFIG_AMD_LV800)
++ (AMD_MANUFACT & FLASH_VENDMASK) |
++ (AMD_ID_LV800B & FLASH_TYPEMASK);
++#else
++#error "Unknown flash configured"
++#endif
++ flash_info[i].size = FLASH_BANK_SIZE;
++ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
++ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
++ if (i == 0)
++ flashbase = PHYS_FLASH_1;
++ else
++ panic ("configured too many flash banks!\n");
++ for (j = 0; j < flash_info[i].sector_count; j++) {
++ if (j <= 3) {
++ /* 1st one is 16 KB */
++ if (j == 0) {
++ flash_info[i].start[j] =
++ flashbase + 0;
++ }
++
++ /* 2nd and 3rd are both 8 KB */
++ if ((j == 1) || (j == 2)) {
++ flash_info[i].start[j] =
++ flashbase + 0x4000 + (j -
++ 1) *
++ 0x2000;
++ }
++
++ /* 4th 32 KB */
++ if (j == 3) {
++ flash_info[i].start[j] =
++ flashbase + 0x8000;
++ }
++ } else {
++ flash_info[i].start[j] =
++ flashbase + (j - 3) * MAIN_SECT_SIZE;
++ }
++ }
++ size += flash_info[i].size;
++ }
++
++ flash_protect (FLAG_PROTECT_SET,
++ CFG_FLASH_BASE,
++ CFG_FLASH_BASE + monitor_flash_len - 1,
++ &flash_info[0]);
++
++#if 0
++ flash_protect (FLAG_PROTECT_SET,
++ CFG_ENV_ADDR,
++ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
++#endif
++
++ return size;
++}
++
++/*-----------------------------------------------------------------------
++ */
++void flash_print_info (flash_info_t * info)
++{
++ int i;
++
++ switch (info->flash_id & FLASH_VENDMASK) {
++ case (AMD_MANUFACT & FLASH_VENDMASK):
++ printf ("AMD: ");
++ break;
++ default:
++ printf ("Unknown Vendor ");
++ break;
++ }
++
++ switch (info->flash_id & FLASH_TYPEMASK) {
++ case (AMD_ID_LV400B & FLASH_TYPEMASK):
++ printf ("1x Amd29LV400BB (4Mbit)\n");
++ break;
++ case (AMD_ID_LV800B & FLASH_TYPEMASK):
++ printf ("1x Amd29LV800BB (8Mbit)\n");
++ break;
++ default:
++ printf ("Unknown Chip Type\n");
++ goto Done;
++ break;
++ }
++
++ printf (" Size: %ld MB in %d Sectors\n",
++ info->size >> 20, info->sector_count);
++
++ printf (" Sector Start Addresses:");
++ for (i = 0; i < info->sector_count; i++) {
++ if ((i % 5) == 0) {
++ printf ("\n ");
++ }
++ printf (" %08lX%s", info->start[i],
++ info->protect[i] ? " (RO)" : " ");
++ }
++ printf ("\n");
++
++ Done:;
++}
++
++/*-----------------------------------------------------------------------
++ */
++
++int flash_erase (flash_info_t * info, int s_first, int s_last)
++{
++ ushort result;
++ int iflag, cflag, prot, sect;
++ int rc = ERR_OK;
++ int chip;
++
++ /* first look for protection bits */
++
++ if (info->flash_id == FLASH_UNKNOWN)
++ return ERR_UNKNOWN_FLASH_TYPE;
++
++ if ((s_first < 0) || (s_first > s_last)) {
++ return ERR_INVAL;
++ }
++
++ if ((info->flash_id & FLASH_VENDMASK) !=
++ (AMD_MANUFACT & FLASH_VENDMASK)) {
++ return ERR_UNKNOWN_FLASH_VENDOR;
++ }
++
++ prot = 0;
++ for (sect = s_first; sect <= s_last; ++sect) {
++ if (info->protect[sect]) {
++ prot++;
++ }
++ }
++ if (prot)
++ return ERR_PROTECTED;
++
++ /*
++ * Disable interrupts which might cause a timeout
++ * here. Remember that our exception vectors are
++ * at address 0 in the flash, and we don't want a
++ * (ticker) exception to happen while the flash
++ * chip is in programming mode.
++ */
++ cflag = icache_status ();
++ icache_disable ();
++ iflag = disable_interrupts ();
++
++ /* Start erase on unprotected sectors */
++ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
++ printf ("Erasing sector %2d ... ", sect);
++
++ /* arm simple, non interrupt dependent timer */
++ reset_timer_masked ();
++
++ if (info->protect[sect] == 0) { /* not protected */
++ vu_short *addr = (vu_short *) (info->start[sect]);
++
++ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
++ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
++ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
++
++ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
++ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
++ *addr = CMD_ERASE_CONFIRM;
++
++ /* wait until flash is ready */
++ chip = 0;
++
++ do {
++ result = *addr;
++
++ /* check timeout */
++ if (get_timer_masked () >
++ CFG_FLASH_ERASE_TOUT) {
++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
++ chip = TMO;
++ break;
++ }
++
++ if (!chip
++ && (result & 0xFFFF) & BIT_ERASE_DONE)
++ chip = READY;
++
++ if (!chip
++ && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
++ chip = ERR;
++
++ } while (!chip);
++
++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
++
++ if (chip == ERR) {
++ rc = ERR_PROG_ERROR;
++ goto outahere;
++ }
++ if (chip == TMO) {
++ rc = ERR_TIMOUT;
++ goto outahere;
++ }
++
++ printf ("ok.\n");
++ } else { /* it was protected */
++
++ printf ("protected!\n");
++ }
++ }
++
++ if (ctrlc ())
++ printf ("User Interrupt!\n");
++
++ outahere:
++ /* allow flash to settle - wait 10 ms */
++ udelay_masked (10000);
++
++ if (iflag)
++ enable_interrupts ();
++
++ if (cflag)
++ icache_enable ();
++
++ return rc;
++}
++
++/*-----------------------------------------------------------------------
++ * Copy memory to flash
++ */
++
++volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
++{
++ vu_short *addr = (vu_short *) dest;
++ ushort result;
++ int rc = ERR_OK;
++ int cflag, iflag;
++ int chip;
++
++ /*
++ * Check if Flash is (sufficiently) erased
++ */
++ result = *addr;
++ if ((result & data) != data)
++ return ERR_NOT_ERASED;
++
++
++ /*
++ * Disable interrupts which might cause a timeout
++ * here. Remember that our exception vectors are
++ * at address 0 in the flash, and we don't want a
++ * (ticker) exception to happen while the flash
++ * chip is in programming mode.
++ */
++ cflag = icache_status ();
++ icache_disable ();
++ iflag = disable_interrupts ();
++
++ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
++ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
++ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
++ *addr = CMD_PROGRAM;
++ *addr = data;
++
++ /* arm simple, non interrupt dependent timer */
++ reset_timer_masked ();
++
++ /* wait until flash is ready */
++ chip = 0;
++ do {
++ result = *addr;
++
++ /* check timeout */
++ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
++ chip = ERR | TMO;
++ break;
++ }
++ if (!chip && ((result & 0x80) == (data & 0x80)))
++ chip = READY;
++
++ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
++ result = *addr;
++
++ if ((result & 0x80) == (data & 0x80))
++ chip = READY;
++ else
++ chip = ERR;
++ }
++
++ } while (!chip);
++
++ *addr = CMD_READ_ARRAY;
++
++ if (chip == ERR || *addr != data)
++ rc = ERR_PROG_ERROR;
++
++ if (iflag)
++ enable_interrupts ();
++
++ if (cflag)
++ icache_enable ();
++
++ return rc;
++}
++
++/*-----------------------------------------------------------------------
++ * Copy memory to flash.
++ */
++
++int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
++{
++ ulong cp, wp;
++ int l;
++ int i, rc;
++ ushort data;
++
++ wp = (addr & ~1); /* get lower word aligned address */
++
++ /*
++ * handle unaligned start bytes
++ */
++ if ((l = addr - wp) != 0) {
++ data = 0;
++ for (i = 0, cp = wp; i < l; ++i, ++cp) {
++ data = (data >> 8) | (*(uchar *) cp << 8);
++ }
++ for (; i < 2 && cnt > 0; ++i) {
++ data = (data >> 8) | (*src++ << 8);
++ --cnt;
++ ++cp;
++ }
++ for (; cnt == 0 && i < 2; ++i, ++cp) {
++ data = (data >> 8) | (*(uchar *) cp << 8);
++ }
++
++ if ((rc = write_hword (info, wp, data)) != 0) {
++ return (rc);
++ }
++ wp += 2;
++ }
++
++ /*
++ * handle word aligned part
++ */
++ while (cnt >= 2) {
++ data = *((vu_short *) src);
++ if ((rc = write_hword (info, wp, data)) != 0) {
++ return (rc);
++ }
++ src += 2;
++ wp += 2;
++ cnt -= 2;
++ }
++
++ if (cnt == 0) {
++ return ERR_OK;
++ }
++
++ /*
++ * handle unaligned tail bytes
++ */
++ data = 0;
++ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
++ data = (data >> 8) | (*src++ << 8);
++ --cnt;
++ }
++ for (; i < 2; ++i, ++cp) {
++ data = (data >> 8) | (*(uchar *) cp << 8);
++ }
++
++ return write_hword (info, wp, data);
++}
+Index: u-boot/board/qt2410/lowlevel_init.S
+===================================================================
+--- /dev/null
++++ u-boot/board/qt2410/lowlevel_init.S
+@@ -0,0 +1,171 @@
++/*
++ * Memory Setup stuff - taken from blob memsetup.S
++ *
++ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
++ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
++ *
++ * Modified for the Samsung SMDK2410 by
++ * (C) Copyright 2002
++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++
++#include <config.h>
++#include <version.h>
++
++
++/* some parameters for the board */
++
++/*
++ *
++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
++ *
++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com>
++ *
++ */
++
++#define BWSCON 0x48000000
++
++/* BWSCON */
++#define DW8 (0x0)
++#define DW16 (0x1)
++#define DW32 (0x2)
++#define WAIT (0x1<<2)
++#define UBLB (0x1<<3)
++
++#define B1_BWSCON (DW32)
++#define B2_BWSCON (DW16)
++#define B3_BWSCON (DW16 + WAIT + UBLB)
++#define B4_BWSCON (DW16)
++#define B5_BWSCON (DW16)
++#define B6_BWSCON (DW32)
++#define B7_BWSCON (DW32)
++
++/* BANK0CON */
++#define B0_Tacs 0x0 /* 0clk */
++#define B0_Tcos 0x0 /* 0clk */
++#define B0_Tacc 0x7 /* 14clk */
++#define B0_Tcoh 0x0 /* 0clk */
++#define B0_Tah 0x0 /* 0clk */
++#define B0_Tacp 0x0
++#define B0_PMC 0x0 /* normal */
++
++/* BANK1CON */
++#define B1_Tacs 0x0 /* 0clk */
++#define B1_Tcos 0x0 /* 0clk */
++#define B1_Tacc 0x7 /* 14clk */
++#define B1_Tcoh 0x0 /* 0clk */
++#define B1_Tah 0x0 /* 0clk */
++#define B1_Tacp 0x0
++#define B1_PMC 0x0
++
++#define B2_Tacs 0x0
++#define B2_Tcos 0x0
++#define B2_Tacc 0x7
++#define B2_Tcoh 0x0
++#define B2_Tah 0x0
++#define B2_Tacp 0x0
++#define B2_PMC 0x0
++
++#define B3_Tacs 0x0 /* 0clk */
++#define B3_Tcos 0x3 /* 4clk */
++#define B3_Tacc 0x7 /* 14clk */
++#define B3_Tcoh 0x1 /* 1clk */
++#define B3_Tah 0x0 /* 0clk */
++#define B3_Tacp 0x3 /* 6clk */
++#define B3_PMC 0x0 /* normal */
++
++#define B4_Tacs 0x0 /* 0clk */
++#define B4_Tcos 0x0 /* 0clk */
++#define B4_Tacc 0x7 /* 14clk */
++#define B4_Tcoh 0x0 /* 0clk */
++#define B4_Tah 0x0 /* 0clk */
++#define B4_Tacp 0x0
++#define B4_PMC 0x0 /* normal */
++
++#define B5_Tacs 0x0 /* 0clk */
++#define B5_Tcos 0x0 /* 0clk */
++#define B5_Tacc 0x7 /* 14clk */
++#define B5_Tcoh 0x0 /* 0clk */
++#define B5_Tah 0x0 /* 0clk */
++#define B5_Tacp 0x0
++#define B5_PMC 0x0 /* normal */
++
++#define B6_MT 0x3 /* SDRAM */
++#define B6_Trcd 0x1
++#define B6_SCAN 0x1 /* 9bit */
++
++#define B7_MT 0x3 /* SDRAM */
++#define B7_Trcd 0x1 /* 3clk */
++#define B7_SCAN 0x1 /* 9bit */
++
++/* REFRESH parameter */
++#define REFEN 0x1 /* Refresh enable */
++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
++#define Trp 0x1 /* 3clk */
++#define Trc 0x3 /* 7clk */
++#define Tchr 0x2 /* 3clk */
++//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
++#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
++/**************************************/
++
++_TEXT_BASE:
++ .word TEXT_BASE
++
++.globl lowlevel_init
++lowlevel_init:
++ /* memory control configuration */
++ /* make r0 relative the current location so that it */
++ /* reads SMRDATA out of FLASH rather than memory ! */
++ adr r0, SMRDATA
++ ldr r1, =BWSCON /* Bus Width Status Controller */
++ add r2, r0, #13*4
++0:
++ ldr r3, [r0], #4
++ str r3, [r1], #4
++ cmp r2, r0
++ bne 0b
++
++ /* setup asynchronous bus mode */
++ mrc p15, 0, r1 ,c1 ,c0, 0
++ orr r1, r1, #0xc0000000
++ mcr p15, 0, r1, c1, c0, 0
++
++ /* everything is fine now */
++ mov pc, lr
++
++ .ltorg
++/* the literal pools origin */
++
++SMRDATA:
++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
++ .word 0xb2
++ .word 0x30
++ .word 0x30
+Index: u-boot/board/qt2410/qt2410.c
+===================================================================
+--- /dev/null
++++ u-boot/board/qt2410/qt2410.c
+@@ -0,0 +1,152 @@
++/*
++ * (C) 2006 by OpenMoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ * based on existing S3C2410 startup code in u-boot:
++ *
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Marius Groeger <mgroeger@sysgo.de>
++ *
++ * (C) Copyright 2002
++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <video_fb.h>
++#include <usbdcore.h>
++#include <s3c2410.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if 1
++//#define M_MDIV 0xA1 /* Fout = 202.8MHz */
++//#define M_PDIV 0x3
++//#define M_SDIV 0x1
++#define M_MDIV 0x90 /* Fout = 202.8MHz */
++#define M_PDIV 0x7
++#define M_SDIV 0x0
++#else
++#define M_MDIV 0x5c /* Fout = 150.0MHz */
++#define M_PDIV 0x4
++#define M_SDIV 0x0
++#endif
++
++#if 1
++#define U_M_MDIV 0x78
++#define U_M_PDIV 0x2
++#define U_M_SDIV 0x3
++#else
++#define U_M_MDIV 0x48
++#define U_M_PDIV 0x3
++#define U_M_SDIV 0x2
++#endif
++
++static inline void delay (unsigned long loops)
++{
++ __asm__ volatile ("1:\n"
++ "subs %0, %1, #1\n"
++ "bne 1b":"=r" (loops):"0" (loops));
++}
++
++/*
++ * Miscellaneous platform dependent initialisations
++ */
++
++int board_init (void)
++{
++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++
++ /* to reduce PLL lock time, adjust the LOCKTIME register */
++ clk_power->LOCKTIME = 0xFFFFFF;
++
++ /* configure MPLL */
++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
++
++ /* some delay between MPLL and UPLL */
++ delay (4000);
++
++ /* configure UPLL */
++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
++
++ /* some delay between MPLL and UPLL */
++ delay (8000);
++
++ /* set up the I/O ports */
++ gpio->GPACON = 0x007FFFFF;
++ gpio->GPBCON = 0x00044555;
++ gpio->GPBUP = 0x000007FF;
++ gpio->GPCCON = 0xAAAAAAAA;
++ gpio->GPCUP = 0x0000FFFF;
++ gpio->GPDCON = 0xAAAAAAAA;
++ gpio->GPDUP = 0x0000FFFF;
++ gpio->GPECON = 0xAAAAAAAA;
++ gpio->GPEUP = 0x0000FFFF;
++ gpio->GPFCON = 0x000055AA;
++ gpio->GPFUP = 0x000000FF;
++ gpio->GPGCON = 0xFF95FFBA;
++ //gpio->GPGUP = 0x0000FFFF;
++ gpio->GPGUP = 0x0000AFEF;
++ gpio->GPHCON = 0x0028FAAA;
++ gpio->GPHUP = 0x000007FF;
++
++ /* arch number of SMDK2410-Board */
++ gd->bd->bi_arch_number = MACH_TYPE_QT2410;
++
++ /* adress of boot parameters */
++ gd->bd->bi_boot_params = 0x30000100;
++
++ icache_enable();
++ dcache_enable();
++
++ return 0;
++}
++
++#if defined(CONFIG_USB_DEVICE)
++void udc_ctrl(enum usbd_event event, int param)
++{
++}
++#endif
++
++void board_video_init(GraphicDevice *pGD)
++{
++ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
++
++ /* FIXME: select LCM type by env variable */
++
++ /* Configuration for GTA01 LCM on QT2410 */
++ lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */
++
++ lcd->LCDCON2 = 0x019fc3c1;
++ lcd->LCDCON3 = 0x0039df67;
++ lcd->LCDCON4 = 0x00000007;
++ lcd->LCDCON5 = 0x0001cf09;
++ lcd->LPCSEL = 0x00000000;
++}
++
++int dram_init (void)
++{
++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
++
++ return 0;
++}
+Index: u-boot/board/qt2410/u-boot.lds
+===================================================================
+--- /dev/null
++++ u-boot/board/qt2410/u-boot.lds
+@@ -0,0 +1,58 @@
++/*
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++ . = 0x00000000;
++
++ . = ALIGN(4);
++ .text :
++ {
++ cpu/arm920t/start.o (.text)
++ cpu/arm920t/s3c24x0/nand_read.o (.text)
++ *(.text)
++ }
++
++ . = ALIGN(4);
++ .rodata : { *(.rodata) }
++
++ . = ALIGN(4);
++ .data : { *(.data) }
++
++ . = ALIGN(4);
++ .got : { *(.got) }
++
++ . = .;
++ __u_boot_cmd_start = .;
++ .u_boot_cmd : { *(.u_boot_cmd) }
++ __u_boot_cmd_end = .;
++
++ . = ALIGN(4);
++ __bss_start = .;
++ .bss : { *(.bss) }
++ _end = .;
++}
+Index: u-boot/include/configs/qt2410.h
+===================================================================
+--- /dev/null
++++ u-boot/include/configs/qt2410.h
+@@ -0,0 +1,287 @@
++/*
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Marius Groeger <mgroeger@sysgo.de>
++ * Gary Jennejohn <gj@denx.de>
++ * David Mueller <d.mueller@elsoft.ch>
++ *
++ * Configuation settings for the Armzone QT2410 board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#if 0
++/* If we want to start u-boot from usb bootloader in NOR flash */
++#define CONFIG_SKIP_RELOCATE_UBOOT 1
++#define CONFIG_SKIP_LOWLEVEL_INIT 1
++#else
++/* If we want to start u-boot directly from within NAND flash */
++#define CONFIG_S3C2410_NAND_BOOT 1
++#define CONFIG_S3C2410_NAND_SKIP_BAD 1
++#endif
++
++#define CFG_UBOOT_SIZE 0x40000
++
++/*
++ * High Level Configuration Options
++ * (easy to change)
++ */
++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
++#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
++#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
++
++/* input clock of PLL */
++#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */
++
++
++#define USE_920T_MMU 1
++#define CONFIG_USE_IRQ 1
++
++/*
++ * Size of malloc() pool
++ */
++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024)
++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
++
++/*
++ * Hardware drivers
++ */
++#if 0
++#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
++#define CS8900_BASE 0x19000300
++#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
++#endif
++
++/*
++ * select serial console configuration
++ */
++#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
++#define CONFIG_HWFLOW 1
++
++/************************************************************
++ * RTC
++ ************************************************************/
++#define CONFIG_RTC_S3C24X0 1
++
++/* allow to overwrite serial and ethaddr */
++#define CONFIG_ENV_OVERWRITE
++
++#define CONFIG_BAUDRATE 115200
++
++/***********************************************************
++ * Command definition
++ ***********************************************************/
++#define CONFIG_COMMANDS (\
++ CFG_CMD_BDI | \
++ CFG_CMD_LOADS | \
++ CFG_CMD_LOADB | \
++ CFG_CMD_IMI | \
++ CFG_CMD_CACHE | \
++ CFG_CMD_MEMORY | \
++ CFG_CMD_ENV | \
++ /* CFG_CMD_IRQ | */ \
++ CFG_CMD_BOOTD | \
++ CFG_CMD_CONSOLE | \
++ CFG_CMD_BMP | \
++ CFG_CMD_ASKENV | \
++ CFG_CMD_RUN | \
++ CFG_CMD_ECHO | \
++ CFG_CMD_I2C | \
++ CFG_CMD_REGINFO | \
++ CFG_CMD_IMMAP | \
++ CFG_CMD_DATE | \
++ CFG_CMD_AUTOSCRIPT | \
++ CFG_CMD_BSP | \
++ CFG_CMD_ELF | \
++ CFG_CMD_MISC | \
++ /* CFG_CMD_USB | */ \
++ CFG_CMD_JFFS2 | \
++ CFG_CMD_DIAG | \
++ CFG_CMD_HWFLOW | \
++ CFG_CMD_SAVES | \
++ CFG_CMD_NAND | \
++ CFG_CMD_PORTIO | \
++ CFG_CMD_MMC | \
++ CFG_CMD_FAT | \
++ CFG_CMD_EXT2 | \
++ 0)
++
++#if 0
++ CFG_CMD_DHCP | \
++ CFG_CMD_PING | \
++ CFG_CMD_NET | \
++
++#endif
++
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++#define CONFIG_BOOTDELAY 3
++#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
++#define CONFIG_ETHADDR 01:ab:cd:ef:fe:dc
++#define CONFIG_NETMASK 255.255.255.0
++#define CONFIG_IPADDR 10.0.0.110
++#define CONFIG_SERVERIP 10.0.0.1
++/*#define CONFIG_BOOTFILE "elinos-lart" */
++#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000"
++
++#define CONFIG_DOS_PARTITION 1
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
++/* what's this ? it's not used anywhere */
++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
++#endif
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP /* undef to save memory */
++#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */
++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
++#define CFG_MAXARGS 64 /* max number of command args */
++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
++
++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
++
++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
++
++#define CFG_LOAD_ADDR 0x33000000 /* default load address */
++
++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
++/* it to wrap 100 times (total 1562500) to get 1 sec. */
++#define CFG_HZ 1562500
++
++/* valid baudrates */
++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
++
++/*-----------------------------------------------------------------------
++ * Stack sizes
++ *
++ * The stack sizes are set up in start.S using the settings below
++ */
++#define CONFIG_STACKSIZE (128*1024) /* regular stack */
++#ifdef CONFIG_USE_IRQ
++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
++#endif
++
++#define CONFIG_USB_OHCI 1
++
++#define CONFIG_USB_DEVICE 1
++#define CONFIG_USB_TTY 1
++#define CFG_CONSOLE_IS_IN_ENV 1
++#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */
++#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */
++#define CONFIG_USBD_PRODUCTID_CDCACM 0x511d /* CDC ACM */
++#define CONFIG_USBD_MANUFACTURER "Armzone"
++#define CONFIG_USBD_PRODUCT_NAME "QT2410 Bootloader " U_BOOT_VERSION
++#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0"
++#define CONFIG_USBD_DFU 1
++#define CONFIG_USBD_DFU_XFER_SIZE 0x4000
++
++/*-----------------------------------------------------------------------
++ * Physical Memory Map
++ */
++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
++#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
++
++#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
++
++#define CFG_FLASH_BASE PHYS_FLASH_1
++
++/*-----------------------------------------------------------------------
++ * FLASH and environment organization
++ */
++
++#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
++
++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
++#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
++#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
++
++/* timeout values are in ticks */
++#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
++#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
++
++#define CFG_ENV_IS_IN_NAND 1
++#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
++#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */
++
++#define NAND_MAX_CHIPS 1
++#define CFG_NAND_BASE 0x4e000000
++#define CFG_MAX_NAND_DEVICE 1
++
++#define CONFIG_MMC 1
++#define CFG_MMC_BASE 0xff000000
++
++#define CONFIG_EXT2 1
++
++/* FAT driver in u-boot is broken currently */
++#define CONFIG_FAT 1
++#define CONFIG_SUPPORT_VFAT
++
++#if 1
++/* JFFS2 driver */
++#define CONFIG_JFFS2_CMDLINE 1
++#define CONFIG_JFFS2_NAND 1
++#define CONFIG_JFFS2_NAND_DEV 0
++//#define CONFIG_JFFS2_NAND_OFF 0x634000
++//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000
++#endif
++
++/* ATAG configuration */
++#define CONFIG_INITRD_TAG 1
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_CMDLINE_TAG 1
++
++#define CONFIG_DRIVER_S3C24X0_I2C 1
++#define CONFIG_HARD_I2C 1
++#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */
++#define CFG_I2C_SLAVE 0x7f
++
++#define CONFIG_VIDEO
++#define CONFIG_VIDEO_S3C2410
++#define CONFIG_CFB_CONSOLE
++#define CONFIG_VIDEO_LOGO
++#define CONFIG_SPLASH_SCREEN
++#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */
++#define CONFIG_VIDEO_BMP_GZIP
++#define CONFIG_VGA_AS_SINGLE_DEVICE
++#define CONFIG_UNZIP
++
++#define VIDEO_KBD_INIT_FCT 0
++#define VIDEO_TSTC_FCT serial_tstc
++#define VIDEO_GETC_FCT serial_getc
++
++#define LCD_VIDEO_ADDR 0x33d00000
++
++#define CONFIG_S3C2410_NAND_BBT 1
++
++#define MTDIDS_DEFAULT "nand0=qt2410-nand"
++#define MTPARTS_DEFAULT "qt2410-nand:192k(u-boot),8k(u-boot_env),2M(kernel),2M(splash),-(jffs2)"
++
++#endif /* __CONFIG_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 17:48:57 +0000