summaryrefslogtreecommitdiff
path: root/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch
diff options
context:
space:
mode:
Diffstat (limited to 'packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch')
-rw-r--r--packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch2248
1 files changed, 2248 insertions, 0 deletions
diff --git a/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch b/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch
new file mode 100644
index 0000000000..7c70244b38
--- /dev/null
+++ b/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch
@@ -0,0 +1,2248 @@
+This patch adds neo1973 'board' (FIC Neo1973 phone) support to u-boot.
+Specifically, it adds support for the GTA01v3, GTA01v4, GTA01Bv2 and
+GTA01Bv3 hardware revisions.
+
+Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -2009,6 +2009,14 @@
+ sbc2410x_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
+
++gta01_config \
++gta01v3_config \
++gta01bv2_config \
++gta01bv3_config \
++gta01bv4_config \
++gta01v4_config : unconfig
++ @sh board/neo1973/gta01/split_by_variant.sh $@
++
+ qt2410_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
+
+Index: u-boot/common/main.c
+===================================================================
+--- u-boot.orig/common/main.c
++++ u-boot/common/main.c
+@@ -61,6 +61,7 @@
+ #undef DEBUG_PARSER
+
+ char console_buffer[CFG_CBSIZE]; /* console I/O buffer */
++int nobootdelay;
+
+ #ifndef CONFIG_CMDLINE_EDITING
+ static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
+@@ -376,7 +377,7 @@
+
+ debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
+
+- if (bootdelay >= 0 && s && !abortboot (bootdelay)) {
++ if (!nobootdelay && bootdelay >= 0 && s && !abortboot (bootdelay)) {
+ # ifdef CONFIG_AUTOBOOT_KEYED
+ int prev = disable_ctrlc(1); /* disable Control C checking */
+ # endif
+Index: u-boot/drivers/Makefile
+===================================================================
+--- u-boot.orig/drivers/Makefile
++++ u-boot/drivers/Makefile
+@@ -50,6 +50,7 @@
+ usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
+ videomodes.o w83c553f.o \
+ ks8695eth.o \
++ pcf50606.o \
+ pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
+ rpx_pcmcia.o \
+ fsl_i2c.o s3c2410_fb.o
+Index: u-boot/drivers/pcf50606.c
+===================================================================
+--- /dev/null
++++ u-boot/drivers/pcf50606.c
+@@ -0,0 +1,112 @@
++
++#include <common.h>
++
++#ifdef CONFIG_DRIVER_PCF50606
++
++#include <i2c.h>
++#include <pcf50606.h>
++#include <asm/atomic.h>
++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
++
++#define PCF50606_I2C_ADDR 0x08
++
++void __pcf50606_reg_write(u_int8_t reg, u_int8_t val)
++{
++ i2c_write(PCF50606_I2C_ADDR, reg, 1, &val, 1);
++}
++
++u_int8_t __pcf50606_reg_read(u_int8_t reg)
++{
++ u_int8_t tmp;
++ i2c_read(PCF50606_I2C_ADDR, reg, 1, &tmp, 1);
++ return tmp;
++}
++
++void pcf50606_reg_write(u_int8_t reg, u_int8_t val)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ __pcf50606_reg_write(reg, val);
++ local_irq_restore(flags);
++}
++
++u_int8_t pcf50606_reg_read(u_int8_t reg)
++{
++ unsigned long flags;
++ u_int8_t tmp;
++
++ local_irq_save(flags);
++ tmp = __pcf50606_reg_read(reg);
++ local_irq_restore(flags);
++
++ return tmp;
++}
++
++void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val)
++{
++ unsigned long flags;
++ u_int8_t tmp;
++
++ local_irq_save(flags);
++ tmp = __pcf50606_reg_read(reg);
++ __pcf50606_reg_write(reg, (val & mask) | (tmp & ~mask));
++ local_irq_restore(flags);
++}
++
++void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits)
++{
++ unsigned long flags;
++ u_int8_t tmp;
++
++ local_irq_save(flags);
++ tmp = pcf50606_reg_read(reg);
++ pcf50606_reg_write(reg, (tmp & ~bits));
++ local_irq_restore(flags);
++}
++
++static const u_int8_t regs_valid[] = {
++ PCF50606_REG_OOCS, PCF50606_REG_INT1M, PCF50606_REG_INT2M,
++ PCF50606_REG_INT3M, PCF50606_REG_OOCC1, PCF50606_REG_OOCC2,
++ PCF50606_REG_PSSC, PCF50606_REG_PWROKM, PCF50606_REG_DCDC1,
++ PCF50606_REG_DCDC2, PCF50606_REG_DCDC3, PCF50606_REG_DCDC4,
++ PCF50606_REG_DCDEC1, PCF50606_REG_DCDEC2, PCF50606_REG_DCUDC1,
++ PCF50606_REG_DCUDC2, PCF50606_REG_IOREGC, PCF50606_REG_D1REGC1,
++ PCF50606_REG_D2REGC1, PCF50606_REG_D3REGC1, PCF50606_REG_LPREGC1,
++ PCF50606_REG_LPREGC2, PCF50606_REG_MBCC1, PCF50606_REG_MBCC2,
++ PCF50606_REG_MBCC3, PCF50606_REG_BBCC, PCF50606_REG_ADCC1,
++ PCF50606_REG_ADCC2, PCF50606_REG_ACDC1, PCF50606_REG_BVMC,
++ PCF50606_REG_PWMC1, PCF50606_REG_LEDC1, PCF50606_REG_LEDC2,
++ PCF50606_REG_GPOC1, PCF50606_REG_GPOC2, PCF50606_REG_GPOC3,
++ PCF50606_REG_GPOC4, PCF50606_REG_GPOC5,
++};
++
++
++/* initialize PCF50606 register set */
++void pcf50606_init(void)
++{
++ unsigned long flags;
++ int i;
++
++ local_irq_save(flags);
++ for (i = 0; i < ARRAY_SIZE(regs_valid); i++) {
++ __pcf50606_reg_write(regs_valid[i],
++ pcf50606_initial_regs[regs_valid[i]]);
++ }
++ local_irq_restore(flags);
++}
++
++void pcf50606_charge_autofast(int on)
++{
++ if (on) {
++ printf("Enabling automatic fast charge\n");
++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
++ PCF50606_MBCC1_AUTOFST,
++ PCF50606_MBCC1_AUTOFST);
++ } else {
++ printf("Disabling fast charge\n");
++ pcf50606_reg_write(PCF50606_REG_MBCC1, 0x00);
++ }
++}
++
++#endif /* CONFIG DRIVER_PCF50606 */
+Index: u-boot/include/pcf50606.h
+===================================================================
+--- /dev/null
++++ u-boot/include/pcf50606.h
+@@ -0,0 +1,273 @@
++#ifndef _PCF50606_H
++#define _PCF50606_H
++
++/* Philips PCF50606 Power Managemnt Unit (PMU) driver
++ * (C) 2006-2007 by OpenMoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ */
++
++enum pfc50606_regs {
++ PCF50606_REG_ID = 0x00,
++ PCF50606_REG_OOCS = 0x01,
++ PCF50606_REG_INT1 = 0x02, /* Interrupt Status */
++ PCF50606_REG_INT2 = 0x03, /* Interrupt Status */
++ PCF50606_REG_INT3 = 0x04, /* Interrupt Status */
++ PCF50606_REG_INT1M = 0x05, /* Interrupt Mask */
++ PCF50606_REG_INT2M = 0x06, /* Interrupt Mask */
++ PCF50606_REG_INT3M = 0x07, /* Interrupt Mask */
++ PCF50606_REG_OOCC1 = 0x08,
++ PCF50606_REG_OOCC2 = 0x09,
++ PCF50606_REG_RTCSC = 0x0a, /* Second */
++ PCF50606_REG_RTCMN = 0x0b, /* Minute */
++ PCF50606_REG_RTCHR = 0x0c, /* Hour */
++ PCF50606_REG_RTCWD = 0x0d, /* Weekday */
++ PCF50606_REG_RTCDT = 0x0e, /* Day */
++ PCF50606_REG_RTCMT = 0x0f, /* Month */
++ PCF50606_REG_RTCYR = 0x10, /* Year */
++ PCF50606_REG_RTCSCA = 0x11, /* Alarm Second */
++ PCF50606_REG_RTCMNA = 0x12, /* Alarm Minute */
++ PCF50606_REG_RTCHRA = 0x13, /* Alarm Hour */
++ PCF50606_REG_RTCWDA = 0x14, /* Alarm Weekday */
++ PCF50606_REG_RTCDTA = 0x15, /* Alarm Day */
++ PCF50606_REG_RTCMTA = 0x16, /* Alarm Month */
++ PCF50606_REG_RTCYRA = 0x17, /* Alarm Year */
++ PCF50606_REG_PSSC = 0x18, /* Power sequencing */
++ PCF50606_REG_PWROKM = 0x19, /* PWROK mask */
++ PCF50606_REG_PWROKS = 0x1a, /* PWROK status */
++ PCF50606_REG_DCDC1 = 0x1b,
++ PCF50606_REG_DCDC2 = 0x1c,
++ PCF50606_REG_DCDC3 = 0x1d,
++ PCF50606_REG_DCDC4 = 0x1e,
++ PCF50606_REG_DCDEC1 = 0x1f,
++ PCF50606_REG_DCDEC2 = 0x20,
++ PCF50606_REG_DCUDC1 = 0x21,
++ PCF50606_REG_DCUDC2 = 0x22,
++ PCF50606_REG_IOREGC = 0x23,
++ PCF50606_REG_D1REGC1 = 0x24,
++ PCF50606_REG_D2REGC1 = 0x25,
++ PCF50606_REG_D3REGC1 = 0x26,
++ PCF50606_REG_LPREGC1 = 0x27,
++ PCF50606_REG_LPREGC2 = 0x28,
++ PCF50606_REG_MBCC1 = 0x29,
++ PCF50606_REG_MBCC2 = 0x2a,
++ PCF50606_REG_MBCC3 = 0x2b,
++ PCF50606_REG_MBCS1 = 0x2c,
++ PCF50606_REG_BBCC = 0x2d,
++ PCF50606_REG_ADCC1 = 0x2e,
++ PCF50606_REG_ADCC2 = 0x2f,
++ PCF50606_REG_ADCS1 = 0x30,
++ PCF50606_REG_ADCS2 = 0x31,
++ PCF50606_REG_ADCS3 = 0x32,
++ PCF50606_REG_ACDC1 = 0x33,
++ PCF50606_REG_BVMC = 0x34,
++ PCF50606_REG_PWMC1 = 0x35,
++ PCF50606_REG_LEDC1 = 0x36,
++ PCF50606_REG_LEDC2 = 0x37,
++ PCF50606_REG_GPOC1 = 0x38,
++ PCF50606_REG_GPOC2 = 0x39,
++ PCF50606_REG_GPOC3 = 0x3a,
++ PCF50606_REG_GPOC4 = 0x3b,
++ PCF50606_REG_GPOC5 = 0x3c,
++ __NUM_PCF50606_REGS
++};
++
++enum pcf50606_reg_oocs {
++ PFC50606_OOCS_ONKEY = 0x01,
++ PCF50606_OOCS_EXTON = 0x02,
++ PCF50606_OOCS_PWROKRST = 0x04,
++ PCF50606_OOCS_BATOK = 0x08,
++ PCF50606_OOCS_BACKOK = 0x10,
++ PCF50606_OOCS_CHGOK = 0x20,
++ PCF50606_OOCS_TEMPOK = 0x40,
++ PCF50606_OOCS_WDTEXP = 0x80,
++};
++
++enum pcf50606_reg_oocc1 {
++ PCF50606_OOCC1_GOSTDBY = 0x01,
++ PCF50606_OOCC1_TOTRST = 0x02,
++ PCF50606_OOCC1_CLK32ON = 0x04,
++ PCF50606_OOCC1_WDTRST = 0x08,
++ PCF50606_OOCC1_RTCWAK = 0x10,
++ PCF50606_OOCC1_CHGWAK = 0x20,
++ PCF50606_OOCC1_EXTONWAK_HIGH = 0x40,
++ PCF50606_OOCC1_EXTONWAK_LOW = 0x80,
++ PCF50606_OOCC1_EXTONWAK_NO_WAKEUP = 0x3f,
++};
++
++enum pcf50606_reg_oocc2 {
++ PCF50606_OOCC2_ONKEYDB_NONE = 0x00,
++ PCF50606_OOCC2_ONKEYDB_14ms = 0x01,
++ PCF50606_OOCC2_ONKEYDB_62ms = 0x02,
++ PCF50606_OOCC2_ONKEYDB_500ms = 0x03,
++ PCF50606_OOCC2_EXTONDB_NONE = 0x00,
++ PCF50606_OOCC2_EXTONDB_14ms = 0x04,
++ PCF50606_OOCC2_EXTONDB_62ms = 0x08,
++ PCF50606_OOCC2_EXTONDB_500ms = 0x0c,
++};
++
++enum pcf50606_reg_int1 {
++ PCF50606_INT1_ONKEYR = 0x01, /* ONKEY rising edge */
++ PCF50606_INT1_ONKEYF = 0x02, /* ONKEY falling edge */
++ PCF50606_INT1_ONKEY1S = 0x04, /* OMKEY at least 1sec low */
++ PCF50606_INT1_EXTONR = 0x08, /* EXTON rising edge */
++ PCF50606_INT1_EXTONF = 0x10, /* EXTON falling edge */
++ PCF50606_INT1_SECOND = 0x40, /* RTC periodic second interrupt */
++ PCF50606_INT1_ALARM = 0x80, /* RTC alarm time is reached */
++};
++
++enum pcf50606_reg_int2 {
++ PCF50606_INT2_CHGINS = 0x01, /* Charger inserted */
++ PCF50606_INT2_CHGRM = 0x02, /* Charger removed */
++ PCF50606_INT2_CHGFOK = 0x04, /* Fast charging OK */
++ PCF50606_INT2_CHGERR = 0x08, /* Error in charging mode */
++ PCF50606_INT2_CHGFRDY = 0x10, /* Fast charge completed */
++ PCF50606_INT2_CHGPROT = 0x20, /* Charging protection interrupt */
++ PCF50606_INT2_CHGWD10S = 0x40, /* Charger watchdig expires in 10s */
++ PCF50606_INT2_CHGWDEXP = 0x80, /* Charger watchdog expires */
++};
++
++enum pcf50606_reg_int3 {
++ PCF50606_INT3_ADCRDY = 0x01, /* ADC conversion finished */
++ PCF50606_INT3_ACDINS = 0x02, /* Accessory inserted */
++ PCF50606_INT3_ACDREM = 0x04, /* Accessory removed */
++ PCF50606_INT3_TSCPRES = 0x08, /* Touch screen pressed */
++ PCF50606_INT3_LOWBAT = 0x40, /* Low battery voltage */
++ PCF50606_INT3_HIGHTMP = 0x80, /* High temperature */
++};
++
++/* used by PSSC, PWROKM, PWROKS, */
++enum pcf50606_regu {
++ PCF50606_REGU_DCD = 0x01, /* DCD in phase 2 */
++ PCF50606_REGU_DCDE = 0x02, /* DCDE in phase 2 */
++ PCF50606_REGU_DCUD = 0x04, /* DCDU in phase 2 */
++ PCF50606_REGU_IO = 0x08, /* IO in phase 2 */
++ PCF50606_REGU_D1 = 0x10, /* D1 in phase 2 */
++ PCF50606_REGU_D2 = 0x20, /* D2 in phase 2 */
++ PCF50606_REGU_D3 = 0x40, /* D3 in phase 2 */
++ PCF50606_REGU_LP = 0x80, /* LP in phase 2 */
++};
++
++enum pcf50606_reg_dcdc4 {
++ PCF50606_DCDC4_MODE_AUTO = 0x00,
++ PCF50606_DCDC4_MODE_PWM = 0x01,
++ PCF50606_DCDC4_MODE_PCF = 0x02,
++ PCF50606_DCDC4_OFF_FLOAT = 0x00,
++ PCF50606_DCDC4_OFF_BYPASS = 0x04,
++ PCF50606_DCDC4_OFF_PULLDOWN = 0x08,
++ PCF50606_DCDC4_CURLIM_500mA = 0x00,
++ PCF50606_DCDC4_CURLIM_750mA = 0x10,
++ PCF50606_DCDC4_CURLIM_1000mA = 0x20,
++ PCF50606_DCDC4_CURLIM_1250mA = 0x30,
++ PCF50606_DCDC4_TOGGLE = 0x40,
++ PCF50606_DCDC4_REGSEL_DCDC2 = 0x80,
++};
++
++enum pcf50606_reg_dcdec2 {
++ PCF50606_DCDEC2_MODE_AUTO = 0x00,
++ PCF50606_DCDEC2_MODE_PWM = 0x01,
++ PCF50606_DCDEC2_MODE_PCF = 0x02,
++ PCF50606_DCDEC2_OFF_FLOAT = 0x00,
++ PCF50606_DCDEC2_OFF_BYPASS = 0x04,
++};
++
++enum pcf50606_reg_dcudc2 {
++ PCF50606_DCUDC2_MODE_AUTO = 0x00,
++ PCF50606_DCUDC2_MODE_PWM = 0x01,
++ PCF50606_DCUDC2_MODE_PCF = 0x02,
++ PCF50606_DCUDC2_OFF_FLOAT = 0x00,
++ PCF50606_DCUDC2_OFF_BYPASS = 0x04,
++};
++
++enum pcf50606_reg_adcc1 {
++ PCF50606_ADCC1_TSCMODACT = 0x01,
++ PCF50606_ADCC1_TSCMODSTB = 0x02,
++ PCF50606_ADCC1_TRATSET = 0x04,
++ PCF50606_ADCC1_NTCSWAPE = 0x08,
++ PCF50606_ADCC1_NTCSWAOFF = 0x10,
++ PCF50606_ADCC1_EXTSYNCBREAK = 0x20,
++ /* reserved */
++ PCF50606_ADCC1_TSCINT = 0x80,
++};
++
++enum pcf50606_reg_adcc2 {
++ PCF50606_ADCC2_ADCSTART = 0x01,
++ /* see enum pcf50606_adcc2_adcmux */
++ PCF50606_ADCC2_SYNC_NONE = 0x00,
++ PCF50606_ADCC2_SYNC_TXON = 0x20,
++ PCF50606_ADCC2_SYNC_PWREN1 = 0x40,
++ PCF50606_ADCC2_SYNC_PWREN2 = 0x60,
++ PCF50606_ADCC2_RES_10BIT = 0x00,
++ PCF50606_ADCC2_RES_8BIT = 0x80,
++};
++
++#define PCF50606_ADCC2_ADCMUX_MASK (0xf << 1)
++
++#define ADCMUX_SHIFT 1
++enum pcf50606_adcc2_adcmux {
++ PCF50606_ADCMUX_BATVOLT_RES = 0x0 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_BATVOLT_SUBTR = 0x1 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_ADCIN1_RES = 0x2 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_ADCIN1_SUBTR = 0x3 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_BATTEMP = 0x4 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_ADCIN2 = 0x5 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_ADCIN3 = 0x6 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_ADCIN3_RATIO = 0x7 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_XPOS = 0x8 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_YPOS = 0x9 << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_P1 = 0xa << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_P2 = 0xb << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_BATVOLT_ADCIN1 = 0xc << ADCMUX_SHIFT,
++ PCF50606_ADCMUX_XY_SEQUENCE = 0xe << ADCMUX_SHIFT,
++ PCF50606_P1_P2_RESISTANCE = 0xf << ADCMUX_SHIFT,
++};
++
++enum pcf50606_adcs2 {
++ PCF50606_ADCS2_ADCRDY = 0x80,
++};
++
++enum pcf50606_reg_mbcc1 {
++ PCF50606_MBCC1_CHGAPE = 0x01,
++ PCF50606_MBCC1_AUTOFST = 0x02,
++#define PCF50606_MBCC1_CHGMOD_MASK 0x1c
++#define PCF50606_MBCC1_CHGMOD_SHIFT 2
++ PCF50606_MBCC1_CHGMOD_QUAL = 0x00,
++ PCF50606_MBCC1_CHGMOD_PRE = 0x04,
++ PCF50606_MBCC1_CHGMOD_TRICKLE = 0x08,
++ PCF50606_MBCC1_CHGMOD_FAST_CCCV = 0x0c,
++ PCF50606_MBCC1_CHGMOD_FAST_NOCC = 0x10,
++ PCF50606_MBCC1_CHGMOD_FAST_NOCV = 0x14,
++ PCF50606_MBCC1_CHGMOD_FAST_SW = 0x18,
++ PCF50606_MBCC1_CHGMOD_IDLE = 0x1c,
++ PCF50606_MBCC1_DETMOD_LOWCHG = 0x20,
++ PCF50606_MBCC1_DETMOD_WDRST = 0x40,
++};
++
++enum pcf50606_reg_bvmc {
++ PCF50606_BVMC_LOWBAT = 0x01,
++ PCF50606_BVMC_THRSHLD_NULL = 0x00,
++ PCF50606_BVMC_THRSHLD_2V8 = 0x02,
++ PCF50606_BVMC_THRSHLD_2V9 = 0x04,
++ PCF50606_BVMC_THRSHLD_3V = 0x08,
++ PCF50606_BVMC_THRSHLD_3V1 = 0x08,
++ PCF50606_BVMC_THRSHLD_3V2 = 0x0a,
++ PCF50606_BVMC_THRSHLD_3V3 = 0x0c,
++ PCF50606_BVMC_THRSHLD_3V4 = 0x0e,
++ PCF50606_BVMC_DISDB = 0x10,
++};
++
++/* this is to be provided by the board implementation */
++extern const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS];
++
++void pcf50606_reg_write(u_int8_t reg, u_int8_t val);
++
++u_int8_t pcf50606_reg_read(u_int8_t reg);
++
++void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val);
++void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits);
++
++void pcf50606_init(void);
++void pcf50606_charge_autofast(int on);
++
++#endif /* _PCF50606_H */
++
+Index: u-boot/board/neo1973/common/cmd_neo1973.c
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/common/cmd_neo1973.c
+@@ -0,0 +1,99 @@
++/*
++ * (C) Copyright 2006 by OpenMoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * Boot support
++ */
++#include <common.h>
++#include <command.h>
++#include <net.h> /* for print_IPaddr */
++#include <s3c2410.h>
++
++#include "neo1973.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if (CONFIG_COMMANDS & CFG_CMD_BDI)
++
++int do_neo1973 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++ int i;
++
++ if (!strcmp(argv[1], "info")) {
++ printf("FIC Neo1973 Hardware Revision 0x%04x\n", get_board_rev());
++ } else if (!strcmp(argv[1], "power-off")) {
++ neo1973_poweroff();
++ } else if (!strcmp(argv[1], "charger") || !strcmp(argv[1], "charge")) {
++ if (argc < 3)
++ goto out_help;
++ if (!strcmp(argv[2], "status") || !strcmp(argv[2], "state")) {
++ printf("%s\n", neo1973_get_charge_status());
++ } else if (!strcmp(argv[2], "autofast")) {
++ neo1973_set_charge_mode(NEO1973_CHGCMD_AUTOFAST);
++ } else if (!strcmp(argv[2], "!autofast")) {
++ neo1973_set_charge_mode(NEO1973_CHGCMD_NO_AUTOFAST);
++ } else if (!strcmp(argv[2], "off")) {
++ neo1973_set_charge_mode(NEO1973_CHGCMD_OFF);
++ } else if (!strcmp(argv[2], "fast")) {
++ neo1973_set_charge_mode(NEO1973_CHGCMD_FAST);
++ } else
++ goto out_help;
++ } else if (!strcmp(argv[1], "backlight")) {
++ if (argc < 3)
++ goto out_help;
++ if (!strcmp(argv[2], "on"))
++ neo1973_backlight(1);
++ else
++ neo1973_backlight(0);
++ } else if (!strcmp(argv[1], "vibrator")) {
++ if (argc < 3)
++ goto out_help;
++ if (!strcmp(argv[2], "on"))
++ neo1973_vibrator(1);
++ else
++ neo1973_vibrator(0);
++ } else {
++out_help:
++ printf("Usage:\n%s\n", cmdtp->usage);
++ return 1;
++ }
++
++ return 0;
++}
++
++/* -------------------------------------------------------------------- */
++
++U_BOOT_CMD(
++ neo1973, 4, 1, do_neo1973,
++ "neo1973 - phone specific commands\n",
++ "neo1973 info - display phone informantion\n"
++ "neo1973 power-off - switch off the phone\n"
++ "neo1973 charger status - display charger status\n"
++ "neo1973 charger autofast - enable automatic fast (500mA) charging\n"
++ "neo1973 charger !autofast - disable automatic fast (500mA) charging\n"
++ "neo1973 charger fast - enable fast (500mA) charging\n"
++ "neo1973 charger off - disable charging\n"
++ "neo1973 backlight (on|off) - switch backlight on or off\n"
++ "neo1973 vibrator (on|off) - switch vibrator on or off\n"
++);
++#endif /* CFG_CMD_BDI */
+Index: u-boot/board/neo1973/common/jbt6k74.c
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/common/jbt6k74.c
+@@ -0,0 +1,420 @@
++/* u-boot driver for the tpo JBT6K74-AS LCM ASIC
++ *
++ * Copyright (C) 2006-2007 by OpenMoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++#include <common.h>
++#include <spi.h>
++#include <video_fb.h>
++#include <asm/errno.h>
++#include <s3c2410.h>
++#include "jbt6k74.h"
++
++#if 0
++#define DEBUGP(x, args...) printf("%s: " x, __FUNCTION__, ## args);
++#define DEBUGPC(x, args...) printf(x, ## args);
++#else
++#define DEBUGP(x, args...) do { } while (0)
++#define DEBUGPC(x, args...) do { } while (0)
++#endif
++
++
++enum jbt_register {
++ JBT_REG_SLEEP_IN = 0x10,
++ JBT_REG_SLEEP_OUT = 0x11,
++
++ JBT_REG_DISPLAY_OFF = 0x28,
++ JBT_REG_DISPLAY_ON = 0x29,
++
++ JBT_REG_RGB_FORMAT = 0x3a,
++ JBT_REG_QUAD_RATE = 0x3b,
++
++ JBT_REG_POWER_ON_OFF = 0xb0,
++ JBT_REG_BOOSTER_OP = 0xb1,
++ JBT_REG_BOOSTER_MODE = 0xb2,
++ JBT_REG_BOOSTER_FREQ = 0xb3,
++ JBT_REG_OPAMP_SYSCLK = 0xb4,
++ JBT_REG_VSC_VOLTAGE = 0xb5,
++ JBT_REG_VCOM_VOLTAGE = 0xb6,
++ JBT_REG_EXT_DISPL = 0xb7,
++ JBT_REG_OUTPUT_CONTROL = 0xb8,
++ JBT_REG_DCCLK_DCEV = 0xb9,
++ JBT_REG_DISPLAY_MODE1 = 0xba,
++ JBT_REG_DISPLAY_MODE2 = 0xbb,
++ JBT_REG_DISPLAY_MODE = 0xbc,
++ JBT_REG_ASW_SLEW = 0xbd,
++ JBT_REG_DUMMY_DISPLAY = 0xbe,
++ JBT_REG_DRIVE_SYSTEM = 0xbf,
++
++ JBT_REG_SLEEP_OUT_FR_A = 0xc0,
++ JBT_REG_SLEEP_OUT_FR_B = 0xc1,
++ JBT_REG_SLEEP_OUT_FR_C = 0xc2,
++ JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
++ JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
++ JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
++ JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
++
++ JBT_REG_GAMMA1_FINE_1 = 0xc7,
++ JBT_REG_GAMMA1_FINE_2 = 0xc8,
++ JBT_REG_GAMMA1_INCLINATION = 0xc9,
++ JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
++
++ JBT_REG_BLANK_CONTROL = 0xcf,
++ JBT_REG_BLANK_TH_TV = 0xd0,
++ JBT_REG_CKV_ON_OFF = 0xd1,
++ JBT_REG_CKV_1_2 = 0xd2,
++ JBT_REG_OEV_TIMING = 0xd3,
++ JBT_REG_ASW_TIMING_1 = 0xd4,
++ JBT_REG_ASW_TIMING_2 = 0xd5,
++
++ JBT_REG_HCLOCK_VGA = 0xec,
++ JBT_REG_HCLOCK_QVGA = 0xed,
++
++};
++
++static const char *jbt_state_names[] = {
++ [JBT_STATE_DEEP_STANDBY] = "deep-standby",
++ [JBT_STATE_SLEEP] = "sleep",
++ [JBT_STATE_NORMAL] = "normal",
++};
++
++#define GTA01_SCLK (1 << 7) /* GPG7 */
++#define GTA01_MOSI (1 << 6) /* GPG6 */
++#define GTA01_MISO (1 << 5) /* GPG5 */
++#define GTA01_CS (1 << 3) /* GPG3 */
++
++#define SPI_READ ((immr->GPGDAT & GTA01_MISO) != 0)
++
++#define SPI_CS(bit) if (bit) gpio->GPGDAT |= GTA01_CS; \
++ else gpio->GPGDAT &= ~GTA01_CS
++
++#define SPI_SDA(bit) if (bit) gpio->GPGDAT |= GTA01_MOSI; \
++ else gpio->GPGDAT &= ~GTA01_MOSI
++
++#define SPI_SCL(bit) if (bit) gpio->GPGDAT |= GTA01_SCLK; \
++ else gpio->GPGDAT &= ~GTA01_SCLK
++
++/* 150uS minimum clock cycle, we have two of this plus our other
++ * instructions */
++#define SPI_DELAY udelay(100) /* 200uS */
++
++
++#define JBT_TX_BUF_SIZE
++struct jbt_info {
++ enum jbt_state state;
++ u_int16_t tx_buf[4];
++ struct spi_device *spi_dev;
++};
++
++static struct jbt_info _jbt, *jbt = &_jbt;
++
++static int jbt_spi_xfer(int wordnum, int bitlen, u_int16_t *dout)
++{
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++ u_int16_t tmpdout = 0;
++ int i, j;
++
++ DEBUGP("spi_xfer: dout %08X wordnum %u bitlen %d\n",
++ *(uint *)dout, wordnum, bitlen);
++
++ SPI_CS(0);
++
++ for (i = 0; i < wordnum; i ++) {
++ tmpdout = dout[i];
++
++ for (j = 0; j < bitlen; j++) {
++ SPI_SCL(0);
++ if (tmpdout & (1 << bitlen-1)) {
++ SPI_SDA(1);
++ DEBUGPC("1");
++ } else {
++ SPI_SDA(0);
++ DEBUGPC("0");
++ }
++ SPI_DELAY;
++ SPI_SCL(1);
++ SPI_DELAY;
++ tmpdout <<= 1;
++ }
++ DEBUGPC(" ");
++ }
++ DEBUGPC("\n");
++
++ SPI_CS(1);
++
++ return 0;
++}
++
++#define JBT_COMMAND 0x000
++#define JBT_DATA 0x100
++
++static int jbt_reg_write_nodata(struct jbt_info *jbt, u_int8_t reg)
++{
++ int rc;
++
++ jbt->tx_buf[0] = JBT_COMMAND | reg;
++
++ rc = jbt_spi_xfer(1, 9, jbt->tx_buf);
++
++ return rc;
++}
++
++
++static int jbt_reg_write(struct jbt_info *jbt, u_int8_t reg, u_int8_t data)
++{
++ int rc;
++
++ jbt->tx_buf[0] = JBT_COMMAND | reg;
++ jbt->tx_buf[1] = JBT_DATA | data;
++
++ rc = jbt_spi_xfer(2, 9, jbt->tx_buf);
++
++ return rc;
++}
++
++static int jbt_reg_write16(struct jbt_info *jbt, u_int8_t reg, u_int16_t data)
++{
++ int rc;
++
++ jbt->tx_buf[0] = JBT_COMMAND | reg;
++ jbt->tx_buf[1] = JBT_DATA | (data >> 8);
++ jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
++
++ rc = jbt_spi_xfer(3, 9, jbt->tx_buf);
++
++ return rc;
++}
++
++static int jbt_init_regs(struct jbt_info *jbt)
++{
++ int rc;
++
++ DEBUGP("entering\n");
++
++ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
++ rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
++ rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
++ rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
++ rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
++ rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
++ rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
++ rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
++ rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
++ rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x02);
++ rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
++
++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
++
++ rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
++
++ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
++ rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
++ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
++ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
++
++ rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
++ rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
++
++ rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
++ rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
++ rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
++
++#if 0
++ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
++ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
++#endif
++
++ return rc;
++}
++
++static int standby_to_sleep(struct jbt_info *jbt)
++{
++ int rc;
++
++ DEBUGP("entering\n");
++
++ /* three times command zero */
++ rc = jbt_reg_write_nodata(jbt, 0x00);
++ udelay(1000);
++ rc = jbt_reg_write_nodata(jbt, 0x00);
++ udelay(1000);
++ rc = jbt_reg_write_nodata(jbt, 0x00);
++ udelay(1000);
++
++ /* deep standby out */
++ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x17);
++
++ return rc;
++}
++
++static int sleep_to_normal(struct jbt_info *jbt)
++{
++ int rc;
++ DEBUGP("entering\n");
++
++ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
++ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
++
++ /* Quad mode off */
++ rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
++
++ /* AVDD on, XVDD on */
++ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
++
++ /* Output control */
++ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
++
++ /* Sleep mode off */
++ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
++
++ /* initialize register set */
++ rc |= jbt_init_regs(jbt);
++ return rc;
++}
++
++static int normal_to_sleep(struct jbt_info *jbt)
++{
++ int rc;
++ DEBUGP("entering\n");
++
++ rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
++ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002);
++ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
++
++ return rc;
++}
++
++static int sleep_to_standby(struct jbt_info *jbt)
++{
++ DEBUGP("entering\n");
++ return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
++}
++
++/* frontend function */
++int jbt6k74_enter_state(enum jbt_state new_state)
++{
++ int rc = -EINVAL;
++
++ DEBUGP("entering(old_state=%u, new_state=%u)\n", jbt->state, new_state);
++
++ switch (jbt->state) {
++ case JBT_STATE_DEEP_STANDBY:
++ switch (new_state) {
++ case JBT_STATE_DEEP_STANDBY:
++ rc = 0;
++ break;
++ case JBT_STATE_SLEEP:
++ rc = standby_to_sleep(jbt);
++ break;
++ case JBT_STATE_NORMAL:
++ /* first transition into sleep */
++ rc = standby_to_sleep(jbt);
++ /* then transition into normal */
++ rc |= sleep_to_normal(jbt);
++ break;
++ }
++ break;
++ case JBT_STATE_SLEEP:
++ switch (new_state) {
++ case JBT_STATE_SLEEP:
++ rc = 0;
++ break;
++ case JBT_STATE_DEEP_STANDBY:
++ rc = sleep_to_standby(jbt);
++ break;
++ case JBT_STATE_NORMAL:
++ rc = sleep_to_normal(jbt);
++ break;
++ }
++ break;
++ case JBT_STATE_NORMAL:
++ switch (new_state) {
++ case JBT_STATE_NORMAL:
++ rc = 0;
++ break;
++ case JBT_STATE_DEEP_STANDBY:
++ /* first transition into sleep */
++ rc = normal_to_sleep(jbt);
++ /* then transition into deep standby */
++ rc |= sleep_to_standby(jbt);
++ break;
++ case JBT_STATE_SLEEP:
++ rc = normal_to_sleep(jbt);
++ break;
++ }
++ break;
++ }
++
++ return rc;
++}
++
++int jbt6k74_display_onoff(int on)
++{
++ DEBUGP("entering\n");
++ if (on)
++ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
++ else
++ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
++}
++
++int jbt6k74_init(void)
++{
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++
++ /* initialize SPI for GPIO bitbang */
++ gpio->GPGCON &= 0xffff033f;
++ gpio->GPGCON |= 0x00005440;
++
++ /* get LCM out of reset */
++ gpio->GPCDAT |= (1 << 6);
++
++ /* according to data sheet: wait 50ms (Tpos of LCM). However, 50ms
++ * seems unreliable with later LCM batches, increasing to 90ms */
++ udelay(90000);
++
++ return 0;
++}
++
++void board_video_init(GraphicDevice *pGD)
++{
++ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
++
++ lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */
++
++ lcd->LCDCON2 = 0x019fc3c1;
++ lcd->LCDCON3 = 0x0039df67;
++ lcd->LCDCON4 = 0x00000007;
++ lcd->LCDCON5 = 0x0001cf09;
++ lcd->LPCSEL = 0x00000000;
++}
+Index: u-boot/board/neo1973/common/jbt6k74.h
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/common/jbt6k74.h
+@@ -0,0 +1,14 @@
++#ifndef _JBT6K74_H
++#define _JBT6K74_H
++
++enum jbt_state {
++ JBT_STATE_DEEP_STANDBY,
++ JBT_STATE_SLEEP,
++ JBT_STATE_NORMAL,
++};
++
++int jbt6k74_init(void);
++int jbt6k74_display_onoff(int on);
++int jbt6k74_enter_state(enum jbt_state new_state);
++
++#endif
+Index: u-boot/board/neo1973/common/lowlevel_init.S
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/common/lowlevel_init.S
+@@ -0,0 +1,187 @@
++/*
++ * Memory Setup stuff - taken from blob memsetup.S
++ *
++ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
++ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
++ *
++ * Modified for the FIC Neo1973 GTA01 by Harald Welte <laforge@openmoko.org>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++
++#include <config.h>
++#include <version.h>
++
++
++/* some parameters for the board */
++
++/*
++ *
++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
++ *
++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com>
++ *
++ */
++
++#define BWSCON 0x48000000
++
++/* BWSCON */
++#define DW8 (0x0)
++#define DW16 (0x1)
++#define DW32 (0x2)
++#define WAIT (0x1<<2)
++#define UBLB (0x1<<3)
++
++#define B1_BWSCON (DW32)
++#define B2_BWSCON (DW16)
++#define B3_BWSCON (DW16 + WAIT + UBLB)
++#define B4_BWSCON (DW16)
++#define B5_BWSCON (DW16)
++#define B6_BWSCON (DW32)
++#define B7_BWSCON (DW32)
++
++/* BANK0CON */
++#define B0_Tacs 0x0 /* 0clk */
++#define B0_Tcos 0x0 /* 0clk */
++#define B0_Tacc 0x7 /* 14clk */
++#define B0_Tcoh 0x0 /* 0clk */
++#define B0_Tah 0x0 /* 0clk */
++#define B0_Tacp 0x0
++#define B0_PMC 0x0 /* normal */
++
++/* BANK1CON */
++#define B1_Tacs 0x0 /* 0clk */
++#define B1_Tcos 0x0 /* 0clk */
++#define B1_Tacc 0x7 /* 14clk */
++#define B1_Tcoh 0x0 /* 0clk */
++#define B1_Tah 0x0 /* 0clk */
++#define B1_Tacp 0x0
++#define B1_PMC 0x0
++
++#define B2_Tacs 0x0
++#define B2_Tcos 0x0
++#define B2_Tacc 0x7
++#define B2_Tcoh 0x0
++#define B2_Tah 0x0
++#define B2_Tacp 0x0
++#define B2_PMC 0x0
++
++#define B3_Tacs 0x0 /* 0clk */
++#define B3_Tcos 0x3 /* 4clk */
++#define B3_Tacc 0x7 /* 14clk */
++#define B3_Tcoh 0x1 /* 1clk */
++#define B3_Tah 0x0 /* 0clk */
++#define B3_Tacp 0x3 /* 6clk */
++#define B3_PMC 0x0 /* normal */
++
++#define B4_Tacs 0x0 /* 0clk */
++#define B4_Tcos 0x0 /* 0clk */
++#define B4_Tacc 0x7 /* 14clk */
++#define B4_Tcoh 0x0 /* 0clk */
++#define B4_Tah 0x0 /* 0clk */
++#define B4_Tacp 0x0
++#define B4_PMC 0x0 /* normal */
++
++#define B5_Tacs 0x0 /* 0clk */
++#define B5_Tcos 0x0 /* 0clk */
++#define B5_Tacc 0x7 /* 14clk */
++#define B5_Tcoh 0x0 /* 0clk */
++#define B5_Tah 0x0 /* 0clk */
++#define B5_Tacp 0x0
++#define B5_PMC 0x0 /* normal */
++
++#define B6_MT 0x3 /* SDRAM */
++#define B6_Trcd 0x1 /* 3clk */
++#if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
++#define B6_SCAN 0x1 /* 9bit */
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
++ defined(CONFIG_ARCH_GTA01B_v4)
++#define B6_SCAN 0x2 /* 10bit */
++#endif
++
++#define B7_MT 0x3 /* SDRAM */
++#define B7_Trcd 0x1 /* 3clk */
++#define B7_SCAN 0x2 /* 10bit */
++
++/* REFRESH parameter */
++#define REFEN 0x1 /* Refresh enable */
++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
++#define Trp 0x1 /* 3clk */
++#define Trc 0x3 /* 7clk */
++#define Tchr 0x2 /* 3clk */
++//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
++#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
++/**************************************/
++
++_TEXT_BASE:
++ .word TEXT_BASE
++
++.globl lowlevel_init
++lowlevel_init:
++ /* memory control configuration */
++ /* make r0 relative the current location so that it */
++ /* reads SMRDATA out of FLASH rather than memory ! */
++ adr r0, SMRDATA
++ ldr r1, =BWSCON /* Bus Width Status Controller */
++ add r2, r0, #13*4
++0:
++ ldr r3, [r0], #4
++ str r3, [r1], #4
++ cmp r2, r0
++ bne 0b
++
++ /* setup asynchronous bus mode */
++ mrc p15, 0, r1 ,c1 ,c0, 0
++ orr r1, r1, #0xc0000000
++ mcr p15, 0, r1, c1, c0, 0
++
++#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
++ /* switch on power for NAND */
++ ldr r0, =0x56000010 /* GPBCON */
++ ldr r1, [r0]
++ orr r1, r1, #0x10
++ str r1, [r0]
++
++ ldr r0, =0x56000014 /* GPBDAT */
++ ldr r1, [r0]
++ orr r1, r1, #(1 <<2)
++ str r1, [r0]
++#endif
++
++ /* everything is fine now */
++ mov pc, lr
++
++ .ltorg
++/* the literal pools origin */
++
++SMRDATA:
++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
++ .word 0xb2
++ .word 0x30
++ .word 0x30
+Index: u-boot/board/neo1973/gta01/Makefile
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/gta01/Makefile
+@@ -0,0 +1,47 @@
++#
++# (C) Copyright 2000, 2001, 2002
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = lib$(BOARD).a
++
++OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o
++SOBJS := ../common/lowlevel_init.o
++
++$(LIB): $(OBJS) $(SOBJS)
++ $(AR) crv $@ $(OBJS) $(SOBJS)
++
++clean:
++ rm -f $(SOBJS) $(OBJS)
++
++distclean: clean
++ rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
++
++-include .depend
++
++#########################################################################
+Index: u-boot/board/neo1973/gta01/config.mk
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/gta01/config.mk
+@@ -0,0 +1,34 @@
++#
++# (C) Copyright 2002
++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
++#
++# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu
++#
++# see http://www.samsung.com/ for more information on SAMSUNG
++#
++
++# GTA01v3 has 1 bank of 64 MB SDRAM
++# GTA01v4 has 1 bank of 64 MB SDRAM
++#
++# 3000'0000 to 3400'0000
++# we load ourself to 33F8'0000
++#
++# GTA01Bv2 or later has 1 bank of 128 MB SDRAM
++#
++# 3000'0000 to 3800'0000
++# we load ourself to 37F8'0000
++#
++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
++# optionally with a ramdisk at 3080'0000
++#
++# download area is 3200'0000 or 3300'0000
++
++sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
++
++ifeq ($(GTA01_BIG_RAM),y)
++# FIXME: TEXT_BASE = 0x37F80000
++TEXT_BASE = 0x33F80000
++else
++TEXT_BASE = 0x33F80000
++endif
+Index: u-boot/board/neo1973/gta01/gta01.c
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/gta01/gta01.c
+@@ -0,0 +1,422 @@
++/*
++ * (C) 2006 by OpenMoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ * based on existing S3C2410 startup code in u-boot:
++ *
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Marius Groeger <mgroeger@sysgo.de>
++ *
++ * (C) Copyright 2002
++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <s3c2410.h>
++#include <i2c.h>
++
++#include "pcf50606.h"
++
++#include "../common/neo1973.h"
++#include "../common/jbt6k74.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++/* That many seconds the power key needs to be pressed to power up */
++#define POWER_KEY_SECONDS 2
++
++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
++//#define M_MDIV 0xA1 /* Fout = 202.8MHz */
++//#define M_PDIV 0x3
++//#define M_SDIV 0x1
++#define M_MDIV 0x90 /* Fout = 202.8MHz */
++#define M_PDIV 0x7
++#define M_SDIV 0x0
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
++/* In case the debug board is attached, we cannot go beyond 200 MHz */
++#if 0
++#define M_MDIV 0x7d /* Fout = 266MHz */
++#define M_PDIV 0x1
++#define M_SDIV 0x1
++#else
++#define M_MDIV 0x90 /* Fout = 202.8MHz */
++#define M_PDIV 0x7
++#define M_SDIV 0x0
++#endif
++#elif defined(CONFIG_ARCH_GTA01B_v4)
++/* This board doesn't have bus lines at teh debug port, and we can go to 266 */
++#define M_MDIV 0x7d /* Fout = 266MHz */
++#define M_PDIV 0x1
++#define M_SDIV 0x1
++#else
++#error Please define GTA01 revision
++#endif
++
++#define U_M_MDIV 0x78
++#define U_M_PDIV 0x2
++#define U_M_SDIV 0x3
++
++unsigned int neo1973_wakeup_cause;
++extern int nobootdelay;
++
++static inline void delay (unsigned long loops)
++{
++ __asm__ volatile ("1:\n"
++ "subs %0, %1, #1\n"
++ "bne 1b":"=r" (loops):"0" (loops));
++}
++
++/*
++ * Miscellaneous platform dependent initialisations
++ */
++
++int board_init (void)
++{
++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++
++ /* to reduce PLL lock time, adjust the LOCKTIME register */
++ clk_power->LOCKTIME = 0xFFFFFF;
++
++ /* configure MPLL */
++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
++
++ /* some delay between MPLL and UPLL */
++ delay (4000);
++
++ /* configure UPLL */
++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
++
++ /* some delay between MPLL and UPLL */
++ delay (8000);
++
++ /* set up the I/O ports */
++#if defined(CONFIG_ARCH_GTA01_v3)
++ gpio->GPACON = 0x007FFFFF;
++
++ gpio->GPBCON = 0x00005055;
++ gpio->GPBUP = 0x000007FF;
++
++ gpio->GPCCON = 0xAAAA12A8;
++ gpio->GPCUP = 0x0000FFFF;
++
++ gpio->GPDCON = 0xAAAAAAAA;
++ gpio->GPDUP = 0x0000FFFF;
++
++ gpio->GPECON = 0xAAAAAAAA;
++ gpio->GPEUP = 0x0000FFFF;
++
++ gpio->GPFCON = 0x00002AA9;
++ gpio->GPFUP = 0x000000FF;
++
++ gpio->GPGCON = 0xA846F0C0;
++ gpio->GPGUP = 0x0000AFEF;
++
++ gpio->GPHCON = 0x0008FAAA;
++ gpio->GPHUP = 0x000007FF;
++#elif defined(CONFIG_ARCH_GTA01_v4)
++ gpio->GPACON = 0x005E47FF;
++
++ gpio->GPBCON = 0x00045015;
++ gpio->GPBUP = 0x000007FF;
++ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (Flash power-up) */
++
++ gpio->GPCCON = 0xAAAA12A9;
++ gpio->GPCUP = 0x0000FFFF;
++
++ gpio->GPDCON = 0xAAAAAAAA;
++ gpio->GPDUP = 0x0000FFFF;
++
++ gpio->GPECON = 0xA02AAAAA;
++ gpio->GPEUP = 0x0000FFFF;
++
++ gpio->GPFCON = 0x0000aa09;
++ gpio->GPFUP = 0x000000FF;
++
++ gpio->GPGCON = 0xFF40F0C1;
++ gpio->GPGUP = 0x0000AFEF;
++
++ gpio->GPHCON = 0x0000FAAA;
++ gpio->GPHUP = 0x000007FF;
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
++ gpio->GPACON = 0x005E4FFF;
++
++ gpio->GPBCON = 0x00145415;
++ gpio->GPBUP = 0x000007FF;
++ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (Flash power-up) */
++
++ gpio->GPCCON = 0xAAAA12A9;
++ gpio->GPCUP = 0x0000FFFF;
++
++ gpio->GPDCON = 0xAAAAAAAA;
++ gpio->GPDUP = 0x0000FFFF;
++
++ gpio->GPECON = 0xA02AAAAA;
++ gpio->GPEUP = 0x0000FFFF;
++
++ gpio->GPFCON = 0x0000aa19;
++ gpio->GPFUP = 0x000000FF;
++ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */
++
++ gpio->GPGCON = 0xFF40F0C1;
++ gpio->GPGUP = 0x0000AFEF;
++
++ gpio->GPHCON = 0x0000FAAA;
++ gpio->GPHUP = 0x000007FF;
++#elif defined(CONFIG_ARCH_GTA01B_v4)
++ gpio->GPACON = 0x0005E0FFF;
++ gpio->GPADAT |= (1 << 16); /* Set GPA16 to high (nNAND_WP) */
++
++ gpio->GPBCON = 0x00045455;
++ gpio->GPBUP = 0x000007FF;
++ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (SD power down) */
++
++ gpio->GPCCON = 0xAAAA12A9;
++ gpio->GPCUP = 0x0000FFFF;
++
++ gpio->GPDCON = 0xAAAAAAAA;
++ gpio->GPDUP = 0x0000FFFF;
++
++ gpio->GPECON = 0xAAAAAAAA;
++ gpio->GPEUP = 0x0000FFFF;
++
++ gpio->GPFCON = 0x0000aa99;
++ gpio->GPFUP = 0x000000FF;
++ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */
++
++ gpio->GPGCON = 0xFF14F0F8;
++ gpio->GPGUP = 0x0000AFEF;
++
++ gpio->GPHCON = 0x0000FAAA;
++ gpio->GPHUP = 0x000007FF;
++#else
++#error Please define GTA01 version
++#endif
++
++ /* arch number of SMDK2410-Board */
++ gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA01;
++
++ /* adress of boot parameters */
++ gd->bd->bi_boot_params = 0x30000100;
++
++ icache_enable();
++ dcache_enable();
++
++ return 0;
++}
++
++int board_late_init(void)
++{
++ unsigned char tmp;
++ char buf[32];
++
++ /* Initialize the Power Management Unit with a safe register set */
++ pcf50606_init();
++
++ /* obtain wake-up reason, save INT1 in environment */
++ tmp = pcf50606_reg_read(PCF50606_REG_INT1);
++ sprintf(buf, "0x%02x", tmp);
++ setenv("pcf50606_int1", buf);
++
++ if (tmp & PCF50606_INT1_ALARM) {
++ /* we've been woken up by RTC alarm or charger insert, boot */
++ neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM;
++ goto continue_boot;
++ }
++ if (tmp & PCF50606_INT1_EXTONR) {
++ neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER;
++ }
++
++ if (tmp & PCF50606_INT1_ONKEYF) {
++ int seconds = 0;
++ neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY;
++ /* we've been woken up by a falling edge of the onkey */
++
++ /* we can't just setenv(bootdelay,-1) because that would
++ * accidentially become permanent if the user does saveenv */
++ if (neo1973_911_key_pressed())
++ nobootdelay = 1;
++
++ while (1) {
++ u_int8_t int1, oocs;
++
++ oocs = pcf50606_reg_read(PCF50606_REG_OOCS);
++ if (oocs & PFC50606_OOCS_ONKEY)
++ break;
++
++ int1 = pcf50606_reg_read(PCF50606_REG_INT1);
++ if (int1 & PCF50606_INT1_SECOND)
++ seconds++;
++
++ if (seconds >= POWER_KEY_SECONDS)
++ goto continue_boot;
++ }
++ /* Power off if minimum number of seconds not reached */
++ neo1973_poweroff();
++ }
++
++ /* if there's no other reason, must be regular reset */
++ neo1973_wakeup_cause = NEO1973_WAKEUP_RESET;
++
++continue_boot:
++ jbt6k74_init();
++ jbt6k74_enter_state(JBT_STATE_NORMAL);
++ jbt6k74_display_onoff(1);
++
++ /* issue a short pulse with the vibrator */
++ neo1973_vibrator(1);
++ udelay(50000);
++ neo1973_vibrator(0);
++
++ /* switch on the backlight */
++ neo1973_backlight(1);
++
++#if defined(CONFIG_ARCH_GTA01B_v4)
++ {
++ /* check if sd card is inserted, and power-up if it is */
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++ if (!(gpio->GPFDAT & (1 << 5)))
++ gpio->GPBDAT &= ~(1 << 2);
++ }
++#endif
++
++ return 0;
++}
++
++int dram_init (void)
++{
++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
++
++ return 0;
++}
++
++u_int32_t get_board_rev(void)
++{
++#if defined(CONFIG_ARCH_GTA01_v3)
++ return 0x00000130;
++#elif defined(CONFIG_ARCH_GTA01_v4)
++ return 0x00000140;
++#elif defined(CONFIG_ARCH_GTA01B_v2)
++ return 0x00000220;
++#elif defined(CONFIG_ARCH_GTA01B_v3)
++ return 0x00000230;
++#elif defined(CONFIG_ARCH_GTA01B_v4)
++ return 0x00000240;
++#endif
++}
++
++void neo1973_poweroff(void)
++{
++ serial_printf("poweroff\n");
++ udc_disconnect();
++ pcf50606_reg_write(PCF50606_REG_OOCC1, PCF50606_OOCC1_GOSTDBY);
++ /* don't return to caller */
++ while (1) ;
++}
++
++void neo1973_backlight(int on)
++{
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++ if (on)
++ gpio->GPBDAT |= 0x01;
++ else
++ gpio->GPBDAT &= ~0x01;
++}
++
++void neo1973_vibrator(int on)
++{
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++ if (on)
++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
++ gpio->GPGDAT |= (1 << 11); /* GPG11 */
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
++ gpio->GPBDAT |= (1 << 10); /* GPB10 */
++#elif defined(CONFIG_ARCH_GTA01B_v4)
++ gpio->GPBDAT |= (1 << 3); /* GPB3 */
++#endif
++ else
++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
++ gpio->GPGDAT &= ~(1 << 11); /* GPG11 */
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
++ gpio->GPBDAT &= ~(1 << 10); /* GPB10 */
++#elif defined(CONFIG_ARCH_GTA01B_v4)
++ gpio->GPBDAT &= ~(1 << 3); /* GPB3 */
++#endif
++}
++
++int neo1973_911_key_pressed(void)
++{
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++ if (gpio->GPFDAT & (1 << 6))
++ return 0;
++ return 1;
++}
++
++static const char *chgstate_names[] = {
++ [PCF50606_MBCC1_CHGMOD_QUAL] = "qualification",
++ [PCF50606_MBCC1_CHGMOD_PRE] = "pre",
++ [PCF50606_MBCC1_CHGMOD_TRICKLE] = "trickle",
++ [PCF50606_MBCC1_CHGMOD_FAST_CCCV] = "fast_cccv",
++ [PCF50606_MBCC1_CHGMOD_FAST_NOCC] = "fast_nocc",
++ [PCF50606_MBCC1_CHGMOD_FAST_NOCV] = "fast_nocv",
++ [PCF50606_MBCC1_CHGMOD_FAST_SW] = "fast_switch",
++ [PCF50606_MBCC1_CHGMOD_IDLE] = "idle",
++};
++
++const char *neo1973_get_charge_status(void)
++{
++ u_int8_t mbcc1 = pcf50606_reg_read(PCF50606_REG_MBCC1);
++ u_int8_t chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK);
++ return chgstate_names[chgmod];
++}
++
++int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd)
++{
++ switch (cmd) {
++ case NEO1973_CHGCMD_NONE:
++ break;
++ case NEO1973_CHGCMD_AUTOFAST:
++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
++ PCF50606_MBCC1_AUTOFST,
++ PCF50606_MBCC1_AUTOFST);
++ break;
++ case NEO1973_CHGCMD_NO_AUTOFAST:
++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
++ PCF50606_MBCC1_AUTOFST, 0);
++ break;
++ case NEO1973_CHGCMD_OFF:
++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
++ PCF50606_MBCC1_CHGMOD_MASK,
++ PCF50606_MBCC1_CHGMOD_IDLE);
++ break;
++
++ case NEO1973_CHGCMD_FAST:
++ case NEO1973_CHGCMD_FASTER:
++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
++ PCF50606_MBCC1_CHGMOD_MASK,
++ PCF50606_MBCC1_CHGMOD_FAST_CCCV);
++ break;
++ }
++ return 0;
++}
++
+Index: u-boot/board/neo1973/gta01/pcf50606.c
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/gta01/pcf50606.c
+@@ -0,0 +1,100 @@
++
++#include <common.h>
++#include <pcf50606.h>
++
++/* initial register set for PCF50606 in Neo1973 devices */
++const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = {
++ [PCF50606_REG_OOCS] = 0x00,
++ /* gap */
++ [PCF50606_REG_INT1M] = PCF50606_INT1_SECOND,
++ [PCF50606_REG_INT2M] = 0x00,
++ [PCF50606_REG_INT3M] = PCF50606_INT3_TSCPRES,
++ [PCF50606_REG_OOCC1] = PCF50606_OOCC1_RTCWAK |
++ PCF50606_OOCC1_CHGWAK |
++ PCF50606_OOCC1_EXTONWAK_HIGH,
++ [PCF50606_REG_OOCC2] = PCF50606_OOCC2_ONKEYDB_14ms |
++ PCF50606_OOCC2_EXTONDB_14ms,
++ /* gap */
++ [PCF50606_REG_PSSC] = 0x00,
++ [PCF50606_REG_PWROKM] = 0x00,
++ /* gap */
++#if defined(CONFIG_ARCH_GTA01B_v2)
++ [PCF50606_REG_DCDC1] = 0x1e, /* GL_3V3: off */
++#elif defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
++ [PCF50606_REG_DCDC1] = 0x18, /* GL_1V5: off */
++#endif
++ [PCF50606_REG_DCDC2] = 0x00,
++ [PCF50606_REG_DCDC3] = 0x00,
++ [PCF50606_REG_DCDC4] = 0x30, /* 1.25A */
++
++ [PCF50606_REG_DCDEC1] = 0xe8, /* IO_3V3: on */
++ [PCF50606_REG_DCDEC2] = 0x00,
++
++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
++ [PCF50606_REG_DCUDC1] = 0xe3, /* CORE_1V8: 1.8V */
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
++ [PCF50606_REG_DCUDC1] = 0xe4, /* CORE_1V8: 2.1V */
++#elif defined(CONFIG_ARCH_GTA01B_v4)
++ [PCF50606_REG_DCUDC1] = 0xc4, /* CORE_1V8: 2.1V if PWREN2 = HIGH */
++#endif
++ [PCF50606_REG_DCUDC2] = 0x30, /* 1.25A current limit */
++
++#if defined(CONFIG_ARCH_GTA01_v3)
++ [PCF50606_REG_IOREGC] = 0x13, /* VTCXO_2V8: off */
++#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \
++ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
++ //see internal bug 94 [PCF50606_REG_IOREGC] = 0x18, /* CODEC_3V3: off */
++ [PCF50606_REG_IOREGC] = 0xf8, /* CODEC_3V3: on */
++#endif
++
++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
++ [PCF50606_REG_D1REGC1] = 0x15, /* VRF_3V: off */
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
++ defined(CONFIG_ARCH_GTA01B_v4)
++ [PCF50606_REG_D1REGC1] = 0x16, /* BT_3V15: off */
++#endif
++
++#if defined(CONFIG_ARCH_GTA01_v3)
++ [PCF50606_REG_D2REGC1] = 0xf8, /* SD_3V3: on */
++#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \
++ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
++ [PCF50606_REG_D2REGC1] = 0x10, /* GL_2V5: off */
++#endif
++
++#if defined(CONFIG_ARCH_GTA01_v3)
++ [PCF50606_REG_D3REGC1] = 0x18, /* CODEC_3V3: off */
++#elif defined(CONFIG_ARCH_GTA01_v4)
++ [PCF50606_REG_D3REGC1] = 0x13, /* VTXCO_2V8: off */
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
++ [PCF50606_REG_D3REGC1] = 0x00, /* USER1: off */
++#elif defined(CONFIG_ARCH_GTA01B_v4)
++ [PCF50606_REG_D3REGC1] = 0xec, /* STBY_1V8: 2.1V */
++#endif
++
++ [PCF50606_REG_LPREGC1] = 0xf8, /* LCM_3V3: on */
++ [PCF50606_REG_LPREGC2] = 0x00,
++
++ [PCF50606_REG_MBCC1] = 0x01, /* CHGAPE */
++ [PCF50606_REG_MBCC2] = 0x00, /* unlimited charging */
++ [PCF50606_REG_MBCC3] = 0x1a, /* 0.2*Ifast, 4.20V */
++ [PCF50606_REG_BBCC] = 0x1f, /* 400uA */
++ [PCF50606_REG_ADCC1] = 0x00,
++ [PCF50606_REG_ADCC2] = 0x00,
++ /* gap */
++#if defined(CONFIG_ARCH_GTA01B_v4)
++ [PCF50606_REG_ACDC1] = 0x86, /* ACD thresh 1.6V, enabled */
++#else
++ [PCF50606_REG_ACDC1] = 0x00,
++#endif
++ [PCF50606_REG_BVMC] = PCF50606_BVMC_THRSHLD_3V3,
++ [PCF50606_REG_PWMC1] = 0x00,
++ [PCF50606_REG_LEDC1] = 0x00,
++ [PCF50606_REG_LEDC2] = 0x00,
++ [PCF50606_REG_GPOC1] = 0x00,
++ [PCF50606_REG_GPOC2] = 0x00,
++ [PCF50606_REG_GPOC3] = 0x00,
++ [PCF50606_REG_GPOC4] = 0x00,
++ [PCF50606_REG_GPOC5] = 0x00,
++};
++
++
+Index: u-boot/board/neo1973/gta01/split_by_variant.sh
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/gta01/split_by_variant.sh
+@@ -0,0 +1,57 @@
++#!/bin/sh
++# ---------------------------------------------------------
++# Set the core module defines according to Core Module
++# ---------------------------------------------------------
++# ---------------------------------------------------------
++# Set up the GTA01 type define
++# ---------------------------------------------------------
++
++CFGINC=${obj}include/config.h
++CFGTMP=${obj}board/neo1973/gta01/config.tmp
++
++mkdir -p ${obj}include
++if [ "$1" == "" ]
++then
++ echo "$0:: No parameters - using GTA01Bv3 config"
++ echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC
++ echo "GTA01_BIG_RAM=y" > $CFGTMP
++else
++ case "$1" in
++ gta01v4_config)
++ echo "#define CONFIG_ARCH_GTA01_v4" > $CFGINC
++ echo "GTA01_BIG_RAM=n" > $CFGTMP
++ ;;
++
++ gta01v3_config)
++ echo "#define CONFIG_ARCH_GTA01_v3" > $CFGINC
++ echo "GTA01_BIG_RAM=n" > $CFGTMP
++ ;;
++
++ gta01bv2_config)
++ echo "#define CONFIG_ARCH_GTA01B_v2" > $CFGINC
++ echo "GTA01_BIG_RAM=y" > $CFGTMP
++ ;;
++
++ gta01bv3_config)
++ echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC
++ echo "GTA01_BIG_RAM=y" > $CFGTMP
++ ;;
++
++ gta01bv4_config)
++ echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC
++ echo "GTA01_BIG_RAM=y" > $CFGTMP
++ ;;
++
++ *)
++ echo "$0:: Unrecognised config - using GTA01Bv4 config"
++ echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC
++ echo "GTA01_BIG_RAM=y" > $CFGTMP
++ ;;
++
++ esac
++
++fi
++# ---------------------------------------------------------
++# Complete the configuration
++# ---------------------------------------------------------
++$MKCONFIG -a neo1973_gta01 arm arm920t gta01 neo1973 s3c24x0
+Index: u-boot/board/neo1973/gta01/u-boot.lds
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/gta01/u-boot.lds
+@@ -0,0 +1,58 @@
++/*
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++ . = 0x00000000;
++
++ . = ALIGN(4);
++ .text :
++ {
++ cpu/arm920t/start.o (.text)
++ cpu/arm920t/s3c24x0/nand_read.o (.text)
++ *(.text)
++ }
++
++ . = ALIGN(4);
++ .rodata : { *(.rodata) }
++
++ . = ALIGN(4);
++ .data : { *(.data) }
++
++ . = ALIGN(4);
++ .got : { *(.got) }
++
++ . = .;
++ __u_boot_cmd_start = .;
++ .u_boot_cmd : { *(.u_boot_cmd) }
++ __u_boot_cmd_end = .;
++
++ . = ALIGN(4);
++ __bss_start = .;
++ .bss : { *(.bss) }
++ _end = .;
++}
+Index: u-boot/include/configs/neo1973_gta01.h
+===================================================================
+--- /dev/null
++++ u-boot/include/configs/neo1973_gta01.h
+@@ -0,0 +1,265 @@
++/*
++ * (C) Copyright 2006 OpenMoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ * Configuation settings for the FIC Neo1973 GTA01 Linux GSM phone
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#if defined(BUILD_FOR_RAM)
++/* If we want to start u-boot from inside RAM */
++#define CONFIG_SKIP_RELOCATE_UBOOT 1
++#define CONFIG_SKIP_LOWLEVEL_INIT 1
++#else
++/* we want to start u-boot directly from within NAND flash */
++#define CONFIG_S3C2410_NAND_BOOT 1
++#define CONFIG_S3C2410_NAND_SKIP_BAD 1
++#endif
++
++#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */
++
++/*
++ * High Level Configuration Options
++ * (easy to change)
++ */
++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
++#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
++#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
++
++/* input clock of PLL */
++#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */
++
++
++#define USE_920T_MMU 1
++#define CONFIG_USE_IRQ 1
++
++/*
++ * Size of malloc() pool
++ */
++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
++
++/*
++ * Hardware drivers
++ */
++
++/*
++ * select serial console configuration
++ */
++#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */
++
++/************************************************************
++ * RTC
++ ************************************************************/
++#define CONFIG_RTC_S3C24X0 1
++
++/* allow to overwrite serial and ethaddr */
++#define CONFIG_ENV_OVERWRITE
++
++#define CONFIG_BAUDRATE 115200
++
++/***********************************************************
++ * Command definition
++ ***********************************************************/
++#define CONFIG_COMMANDS (\
++ CFG_CMD_BDI | \
++ CFG_CMD_LOADS | \
++ CFG_CMD_LAODB | \
++ CFG_CMD_IMI | \
++ CFG_CMD_CACHE | \
++ CFG_CMD_MEMORY | \
++ CFG_CMD_ENV | \
++ /* CFG_CMD_IRQ | */ \
++ CFG_CMD_BOOTD | \
++ CFG_CMD_CONSOLE | \
++ CFG_CMD_ASKENV | \
++ CFG_CMD_RUN | \
++ CFG_CMD_ECHO | \
++ CFG_CMD_I2C | \
++ CFG_CMD_REGINFO | \
++ CFG_CMD_IMMAP | \
++ CFG_CMD_DATE | \
++ CFG_CMD_AUTOSCRIPT | \
++ CFG_CMD_BSP | \
++ CFG_CMD_ELF | \
++ CFG_CMD_MISC | \
++ /* CFG_CMD_USB | */ \
++ /* CFG_CMD_JFFS2 | */ \
++ CFG_CMD_DIAG | \
++ /* CFG_CMD_HWFLOW | */ \
++ CFG_CMD_SAVES | \
++ CFG_CMD_NAND | \
++ CFG_CMD_PORTIO | \
++ CFG_CMD_MMC | \
++ CFG_CMD_FAT | \
++ CFG_CMD_EXT2 | \
++ 0)
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++#define CONFIG_BOOTDELAY 3
++#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
++#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x34000 0x200000; bootm 0x32000000"
++
++#define CONFIG_DOS_PARTITION 1
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
++/* what's this ? it's not used anywhere */
++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
++#endif
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP /* undef to save memory */
++#if defined(CONFIG_ARCH_GTA01_v3)
++#define CFG_PROMPT "GTA01v3 # " /* Monitor Command Prompt */
++#elif defined(CONFIG_ARCH_GTA01_v4)
++#define CFG_PROMPT "GTA01v4 # " /* Monitor Command Prompt */
++#elif defined(CONFIG_ARCH_GTA01B_v2)
++#define CFG_PROMPT "GTA01Bv2 # " /* Monitor Command Prompt */
++#elif defined(CONFIG_ARCH_GTA01B_v3)
++#define CFG_PROMPT "GTA01Bv3 # " /* Monitor Command Prompt */
++#elif defined(CONFIG_ARCH_GTA01B_v4)
++#define CFG_PROMPT "GTA01Bv4 # " /* Monitor Command Prompt */
++#endif
++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
++#define CFG_MAXARGS 16 /* max number of command args */
++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
++
++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
++
++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
++
++#define CFG_LOAD_ADDR 0x33000000 /* default load address */
++
++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
++/* it to wrap 100 times (total 1562500) to get 1 sec. */
++#define CFG_HZ 1562500
++
++/* valid baudrates */
++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
++
++/*-----------------------------------------------------------------------
++ * Stack sizes
++ *
++ * The stack sizes are set up in start.S using the settings below
++ */
++#define CONFIG_STACKSIZE (128*1024) /* regular stack */
++#ifdef CONFIG_USE_IRQ
++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
++#endif
++
++#if 0
++#define CONFIG_USB_OHCI 1
++#endif
++
++/*-----------------------------------------------------------------------
++ * Physical Memory Map
++ */
++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
++ defined(CONFIG_ARCH_GTA01B_v4)
++#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
++#else
++#error Please define GTA01 variant
++#endif
++#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
++
++/*-----------------------------------------------------------------------
++ * FLASH and environment organization
++ */
++
++/* No NOR flash in this device */
++#define CFG_NO_FLASH 1
++
++#define CFG_ENV_IS_IN_NAND 1
++#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
++#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */
++
++#define NAND_MAX_CHIPS 1
++#define CFG_NAND_BASE 0x4e000000
++#define CFG_MAX_NAND_DEVICE 1
++
++#define CONFIG_MMC 1
++#define CFG_MMC_BASE 0xff000000
++
++/* EXT2 driver */
++#define CONFIG_EXT2 1
++
++#define CONFIG_FAT 1
++#define CONFIG_SUPPORT_VFAT
++
++#if 0
++/* JFFS2 driver */
++#define CONFIG_JFFS2_CMDLINE 1
++#define CONFIG_JFFS2_NAND 1
++#define CONFIG_JFFS2_NAND_DEV 0
++#define CONFIG_JFFS2_NAND_OFF 0x634000
++#define CONFIG_JFFS2_NAND_SIZE 0x39cc000
++#endif
++
++/* ATAG configuration */
++#define CONFIG_INITRD_TAG 1
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_CMDLINE_TAG 1
++#define CONFIG_REVISION_TAG 1
++#if 0
++#define CONFIG_SERIAL_TAG 1
++#endif
++
++#define CONFIG_DRIVER_S3C24X0_I2C 1
++#define CONFIG_HARD_I2C 1
++#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */
++#define CFG_I2C_SLAVE 0x7f
++
++/* we have a board_late_init() function */
++#define BOARD_LATE_INIT 1
++
++#if 1
++#define CONFIG_VIDEO
++#define CONFIG_VIDEO_S3C2410
++#define CONFIG_CFB_CONSOLE
++#define CONFIG_VIDEO_LOGO
++#define CONFIG_VGA_AS_SINGLE_DEVICE
++
++#define VIDEO_KBD_INIT_FCT 0
++#define VIDEO_TSTC_FCT serial_tstc
++#define VIDEO_GETC_FCT serial_getc
++
++#define LCD_VIDEO_ADDR 0x33d00000
++#endif
++
++#define CONFIG_S3C2410_NAND_BBT 1
++#define CONFIG_S3C2410_NAND_HWECC 1
++
++#define CONFIG_DRIVER_PCF50606 1
++
++#endif /* __CONFIG_H */
+Index: u-boot/board/neo1973/common/neo1973.h
+===================================================================
+--- /dev/null
++++ u-boot/board/neo1973/common/neo1973.h
+@@ -0,0 +1,32 @@
++#ifndef _NEO1973_H
++#define _NEO1973_H
++
++enum wakeup_reason {
++ NEO1973_WAKEUP_NONE,
++ NEO1973_WAKEUP_RESET,
++ NEO1973_WAKEUP_POWER_KEY,
++ NEO1973_WAKEUP_CHARGER,
++ NEO1973_WAKEUP_ALARM,
++};
++
++enum neo1973_charger_cmd {
++ NEO1973_CHGCMD_NONE,
++ NEO1973_CHGCMD_AUTOFAST,
++ NEO1973_CHGCMD_NO_AUTOFAST,
++ NEO1973_CHGCMD_OFF,
++ NEO1973_CHGCMD_FAST,
++ NEO1973_CHGCMD_FASTER,
++};
++
++extern unsigned int neo1973_wakeup_cause;
++
++void neo1973_poweroff(void);
++void neo1973_backlight(int on);
++void neo1973_vibrator(int on);
++
++int neo1973_911_key_pressed(void);
++
++const char *neo1973_get_charge_status(void);
++int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd);
++
++#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 07:22:28 +0000