diff options
Diffstat (limited to 'packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch')
| -rw-r--r-- | packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch | 1481 |
1 files changed, 1481 insertions, 0 deletions
diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch new file mode 100644 index 0000000000..09392ad2cf --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch @@ -0,0 +1,1481 @@ +Add support for the Samsung SMDK2440 development board + +Index: u-boot/Makefile +=================================================================== +--- u-boot.orig/Makefile ++++ u-boot/Makefile +@@ -2035,6 +2035,9 @@ + smdk2410_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 + ++smdk2440_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2440 NULL s3c24x0 ++ + SX1_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm925t sx1 + +Index: u-boot/include/configs/smdk2440.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/smdk2440.h +@@ -0,0 +1,296 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * Gary Jennejohn <gj@denx.de> ++ * David Mueller <d.mueller@elsoft.ch> ++ * ++ * Configuation settings for the SAMSUNG SMDK2440 board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#if 0 ++/* If we want to start u-boot from usb bootloader in NOR flash */ ++#define CONFIG_SKIP_RELOCATE_UBOOT 1 ++#define CONFIG_SKIP_LOWLEVEL_INIT 1 ++#else ++/* If we want to start u-boot directly from within NAND flash */ ++#define CONFIG_LL_INIT_NAND_ONLY ++#define CONFIG_S3C2410_NAND_BOOT 1 ++#define CONFIG_S3C2410_NAND_SKIP_BAD 1 ++#endif ++ ++#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2440 SoC */ ++#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2440 Board */ ++ ++/* input clock of PLL */ ++#define CONFIG_SYS_CLK_FREQ 16934400/* SMDK2440 has 16.9344MHz input clock */ ++ ++ ++#define USE_920T_MMU 1 ++#define CONFIG_USE_IRQ 1 ++//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 2048*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ ++#define CS8900_BASE 0x19000300 ++#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2440 */ ++#define CONFIG_HWFLOW 1 ++ ++/************************************************************ ++ * RTC ++ ************************************************************/ ++#define CONFIG_RTC_S3C24X0 1 ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/*********************************************************** ++ * Command definition ++ ***********************************************************/ ++#define CONFIG_COMMANDS \ ++ (CONFIG_CMD_DFL | \ ++ /*CFG_CMD_BSP | */ \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_DATE | \ ++ /*CFG_CMD_DHCP | */ \ ++ CFG_CMD_DIAG | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_EXT2 | \ ++ CFG_CMD_FAT | \ ++ /*CFG_CMD_HWFLOW | */ \ ++ /* CFG_CMD_IDE | */ \ ++ /* CFG_CMD_IRQ | */ \ ++ CFG_CMD_JFFS2 | \ ++ CFG_CMD_MMC | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_PORTIO | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_SAVES | \ ++ CFG_CMD_USB) ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 console=ttySAC2,115200 loglevel=8" ++#define CONFIG_ETHADDR 00:0c:20:02:0a:5b ++#define CONFIG_NETMASK 255.255.255.0 ++#define CONFIG_IPADDR 192.168.1.100 ++#define CONFIG_SERVERIP 192.168.1.21 ++/*#define CONFIG_BOOTFILE "elinos-lart" */ ++//#define CONFIG_BOOTCOMMAND "nand read 0x32000000 0x34000 0x200000; bootm" ++#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x100000 0x200000; bootm" ++ ++#define CONFIG_DOS_PARTITION 1 ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ ++/* what's this ? it's not used anywhere */ ++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "SMDK2440 # " /* Monitor Command Prompt */ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 32 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0x32000000 /* default load address */ ++ ++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ ++/* it to wrap 100 times (total 1562500) to get 1 sec. */ ++#define CFG_HZ 1562500 ++ ++/* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++/*----------------------------------------------------------------------- ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (512*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++/* IDE/ATA config */ ++ ++#if 0 ++#define CFG_IDE_MAXBUS 1 ++#define CFG_IDE_MAXDEVICE 2 ++#define CFG_IDE_PREINIT 0 ++ ++#define CFG_ATA_BASE_ADDR ++#endif ++ ++#define CONFIG_USB_OHCI 1 ++ ++#define CONFIG_USB_DEVICE 1 ++#define CONFIG_USB_TTY 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_USBD_VENDORID 0x1457 /* FIC */ ++#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ ++#define CONFIG_USBD_PRODUCTID_CDCACM 0x511b /* SMDK2440 CDC ACM */ ++#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc." ++#define CONFIG_USBD_PRODUCT_NAME "S3C2440 Bootloader " U_BOOT_VERSION ++#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" ++#define CONFIG_USBD_DFU 1 ++#define CONFIG_USBD_DFU_XFER_SIZE 4096 ++#define CONFIG_USBD_DFU_INTERFACE 2 ++ ++/*----------------------------------------------------------------------- ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ ++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++ ++#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/*----------------------------------------------------------------------- ++ * FLASH and environment organization ++ */ ++ ++#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ ++#if 0 ++#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ ++#endif ++ ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#ifdef CONFIG_AMD_LV800 ++#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ ++#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ ++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ ++#endif ++#ifdef CONFIG_AMD_LV400 ++#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ ++#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ ++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ ++#endif ++ ++/* timeout values are in ticks */ ++#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ ++#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_SIZE 0x20000 /* 128k Total Size of Environment Sector */ ++#define CFG_ENV_OFFSET_OOB 1 ++#define CFG_PREBOOT_OVERRIDE 1 ++ ++#define NAND_MAX_CHIPS 1 ++#define CFG_NAND_BASE 0x4e000000 ++#define CFG_MAX_NAND_DEVICE 1 ++ ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xff000000 ++ ++#define CONFIG_EXT2 1 ++ ++#define CONFIG_NEW_QT2440 0 ++ ++/* FAT driver in u-boot is broken currently */ ++#define CONFIG_FAT 1 ++#define CONFIG_SUPPORT_VFAT ++ ++#if 1 ++/* JFFS2 driver */ ++#define CONFIG_JFFS2_CMDLINE 1 ++#define CONFIG_JFFS2_NAND 1 ++#define CONFIG_JFFS2_NAND_DEV 0 ++//#define CONFIG_JFFS2_NAND_OFF 0x634000 ++//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 ++#endif ++ ++/* ATAG configuration */ ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 ++#if 0 ++#define CONFIG_SERIAL_TAG 1 ++#define CONFIG_REVISION_TAG 1 ++#endif ++ ++ ++#if 0 ++#define CONFIG_VIDEO ++#define CONFIG_VIDEO_S3C2410 ++#define CONFIG_CFB_CONSOLE ++#define CONFIG_VIDEO_LOGO ++#define CONFIG_VGA_AS_SINGLE_DEVICE ++ ++#define VIDEO_KBD_INIT_FCT 0 ++#define VIDEO_TSTC_FCT serial_tstc ++#define VIDEO_GETC_FCT serial_getc ++ ++#define LCD_VIDEO_ADDR 0x33d00000 ++#endif ++ ++#define CONFIG_S3C2410_NAND_BBT 1 ++//#define CONFIG_S3C2410_NAND_HWECC 1 ++ ++#define CFG_NAND_YAFFS_WRITE ++#define CFG_NAND_YAFFS1_NEW_OOB_LAYOUT ++ ++#define MTDIDS_DEFAULT "nand0=smdk2440-nand" ++#define MTPARTS_DEFAULT "smdk2440-nand:0x00100000(u-boot),0x00200000(kernel),0x00200000(update),0x00100000(splash),0x01400000(jffs2),-(temp)" ++#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "smdk2440-nand" ++#define CONFIG_NAND_DYNPART ++ ++#endif /* __CONFIG_H */ +Index: u-boot/include/configs/smdk2440nand.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/smdk2440nand.h +@@ -0,0 +1,47 @@ ++/* ++ * (C) Copyright 2004 ++ * Samsung Electronics : SW.LEE <hitchcar@samsung.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ */ ++ ++#ifndef __SMDK2440_NAND_H ++#define __SMDK2440_NAND_H ++ ++#define CFG_ENV_NAND_BLOCK 8 ++ ++#if 0 //old flash ++#define NAND_OOB_SIZE (16) ++#define NAND_PAGES_IN_BLOCK (32) ++#define NAND_PAGE_SIZE (512) ++ ++#define NAND_BLOCK_SIZE (NAND_PAGE_SIZE*NAND_PAGES_IN_BLOCK) ++#define NAND_BLOCK_MASK (NAND_BLOCK_SIZE - 1) ++#define NAND_PAGE_MASK (NAND_PAGE_SIZE - 1) ++#else //new flash ++#define NAND_OOB_SIZE (64) ++#define NAND_PAGES_IN_BLOCK (64) ++#define NAND_PAGE_SIZE (2048) ++ ++#define NAND_BLOCK_SIZE (NAND_PAGE_SIZE*NAND_PAGES_IN_BLOCK) ++#define NAND_BLOCK_MASK (NAND_BLOCK_SIZE - 1) ++#define NAND_PAGE_MASK (NAND_PAGE_SIZE - 1) ++ ++#endif ++ ++ ++ ++//#define NAND_3_ADDR_CYCLE 1 ++//#define S3C24X0_16BIT_NAND 1 ++ ++#ifdef KINGFISH ++#undef S3C24X0_16BIT_NAND ++#define S3C24X0_16BIT_NAND 1 ++#endif ++ ++#endif ++ +Index: u-boot/board/smdk2440/Makefile +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/Makefile +@@ -0,0 +1,67 @@ ++# ++# (C) Copyright 2000-2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := smdk2440.o flash.o udc.o ++SOBJS := lowlevel_init.o ++ ++.PHONY: all ++ ++all: $(LIB) lowlevel_foo.bin ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++lowlevel_foo.o: lowlevel_foo.S ++ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ ++ -o lowlevel_foo.o lowlevel_foo.S ++ ++lowlevel_foo: lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds ++ $(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ ++ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo ++ ++lowlevel_foo.bin: lowlevel_foo ++ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ ++ lowlevel_foo lowlevel_foo.bin ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +Index: u-boot/board/smdk2440/config.mk +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/config.mk +@@ -0,0 +1,29 @@ ++# ++# (C) Copyright 2002 ++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++# ++# SAMSUNG SMDK2440 board with S3C2440 (ARM920T) cpu ++# ++# see http://www.samsung.com/ for more information on SAMSUNG ++# ++ ++CONFIG_USB_DFU_VENDOR=0x1457 ++CONFIG_USB_DFU_PRODUCT=0x511b ++CONFIG_USB_DFU_REVISION=0x0100 ++ ++# ++# SMDK2440 has 1 bank of 64 MB DRAM ++# ++# 3000'0000 to 3400'0000 ++# ++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 ++# optionally with a ramdisk at 3080'0000 ++# ++# we load ourself to 33F8'0000 ++# ++# download area is 3300'0000 ++# ++ ++ ++TEXT_BASE = 0x33F80000 +Index: u-boot/board/smdk2440/flash.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/flash.c +@@ -0,0 +1,433 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Alex Zuepke <azu@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ulong myflush (void); ++ ++ ++#define FLASH_BANK_SIZE PHYS_FLASH_SIZE ++#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ ++ ++flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ++ ++ ++#define CMD_READ_ARRAY 0x000000F0 ++#define CMD_UNLOCK1 0x000000AA ++#define CMD_UNLOCK2 0x00000055 ++#define CMD_ERASE_SETUP 0x00000080 ++#define CMD_ERASE_CONFIRM 0x00000030 ++#define CMD_PROGRAM 0x000000A0 ++#define CMD_UNLOCK_BYPASS 0x00000020 ++ ++#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) ++#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) ++ ++#define BIT_ERASE_DONE 0x00000080 ++#define BIT_RDY_MASK 0x00000080 ++#define BIT_PROGRAM_ERROR 0x00000020 ++#define BIT_TIMEOUT 0x80000000 /* our flag */ ++ ++#define READY 1 ++#define ERR 2 ++#define TMO 4 ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++ulong flash_init (void) ++{ ++ int i, j; ++ ulong size = 0; ++ ++ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { ++ ulong flashbase = 0; ++ ++ flash_info[i].flash_id = ++#if defined(CONFIG_AMD_LV400) ++ (AMD_MANUFACT & FLASH_VENDMASK) | ++ (AMD_ID_LV400B & FLASH_TYPEMASK); ++#elif defined(CONFIG_AMD_LV800) ++ (AMD_MANUFACT & FLASH_VENDMASK) | ++ (AMD_ID_LV800B & FLASH_TYPEMASK); ++#else ++#error "Unknown flash configured" ++#endif ++ flash_info[i].size = FLASH_BANK_SIZE; ++ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; ++ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); ++ if (i == 0) ++ flashbase = PHYS_FLASH_1; ++ else ++ panic ("configured too many flash banks!\n"); ++ for (j = 0; j < flash_info[i].sector_count; j++) { ++ if (j <= 3) { ++ /* 1st one is 16 KB */ ++ if (j == 0) { ++ flash_info[i].start[j] = ++ flashbase + 0; ++ } ++ ++ /* 2nd and 3rd are both 8 KB */ ++ if ((j == 1) || (j == 2)) { ++ flash_info[i].start[j] = ++ flashbase + 0x4000 + (j - ++ 1) * ++ 0x2000; ++ } ++ ++ /* 4th 32 KB */ ++ if (j == 3) { ++ flash_info[i].start[j] = ++ flashbase + 0x8000; ++ } ++ } else { ++ flash_info[i].start[j] = ++ flashbase + (j - 3) * MAIN_SECT_SIZE; ++ } ++ } ++ size += flash_info[i].size; ++ } ++ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_FLASH_BASE, ++ CFG_FLASH_BASE + monitor_flash_len - 1, ++ &flash_info[0]); ++ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_ENV_ADDR, ++ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); ++ ++ return size; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++void flash_print_info (flash_info_t * info) ++{ ++ int i; ++ ++ switch (info->flash_id & FLASH_VENDMASK) { ++ case (AMD_MANUFACT & FLASH_VENDMASK): ++ printf ("AMD: "); ++ break; ++ default: ++ printf ("Unknown Vendor "); ++ break; ++ } ++ ++ switch (info->flash_id & FLASH_TYPEMASK) { ++ case (AMD_ID_LV400B & FLASH_TYPEMASK): ++ printf ("1x Amd29LV400BB (4Mbit)\n"); ++ break; ++ case (AMD_ID_LV800B & FLASH_TYPEMASK): ++ printf ("1x Amd29LV800BB (8Mbit)\n"); ++ break; ++ default: ++ printf ("Unknown Chip Type\n"); ++ goto Done; ++ break; ++ } ++ ++ printf (" Size: %ld MB in %d Sectors\n", ++ info->size >> 20, info->sector_count); ++ ++ printf (" Sector Start Addresses:"); ++ for (i = 0; i < info->sector_count; i++) { ++ if ((i % 5) == 0) { ++ printf ("\n "); ++ } ++ printf (" %08lX%s", info->start[i], ++ info->protect[i] ? " (RO)" : " "); ++ } ++ printf ("\n"); ++ ++ Done:; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++int flash_erase (flash_info_t * info, int s_first, int s_last) ++{ ++ ushort result; ++ int iflag, cflag, prot, sect; ++ int rc = ERR_OK; ++ int chip; ++ ++ /* first look for protection bits */ ++ ++ if (info->flash_id == FLASH_UNKNOWN) ++ return ERR_UNKNOWN_FLASH_TYPE; ++ ++ if ((s_first < 0) || (s_first > s_last)) { ++ return ERR_INVAL; ++ } ++ ++ if ((info->flash_id & FLASH_VENDMASK) != ++ (AMD_MANUFACT & FLASH_VENDMASK)) { ++ return ERR_UNKNOWN_FLASH_VENDOR; ++ } ++ ++ prot = 0; ++ for (sect = s_first; sect <= s_last; ++sect) { ++ if (info->protect[sect]) { ++ prot++; ++ } ++ } ++ if (prot) ++ return ERR_PROTECTED; ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ /* Start erase on unprotected sectors */ ++ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { ++ printf ("Erasing sector %2d ... ", sect); ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ if (info->protect[sect] == 0) { /* not protected */ ++ vu_short *addr = (vu_short *) (info->start[sect]); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ *addr = CMD_ERASE_CONFIRM; ++ ++ /* wait until flash is ready */ ++ chip = 0; ++ ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > ++ CFG_FLASH_ERASE_TOUT) { ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ chip = TMO; ++ break; ++ } ++ ++ if (!chip ++ && (result & 0xFFFF) & BIT_ERASE_DONE) ++ chip = READY; ++ ++ if (!chip ++ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) ++ chip = ERR; ++ ++ } while (!chip); ++ ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ ++ if (chip == ERR) { ++ rc = ERR_PROG_ERROR; ++ goto outahere; ++ } ++ if (chip == TMO) { ++ rc = ERR_TIMOUT; ++ goto outahere; ++ } ++ ++ printf ("ok.\n"); ++ } else { /* it was protected */ ++ ++ printf ("protected!\n"); ++ } ++ } ++ ++ if (ctrlc ()) ++ printf ("User Interrupt!\n"); ++ ++ outahere: ++ /* allow flash to settle - wait 10 ms */ ++ udelay_masked (10000); ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash ++ */ ++ ++volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) ++{ ++ vu_short *addr = (vu_short *) dest; ++ ushort result; ++ int rc = ERR_OK; ++ int cflag, iflag; ++ int chip; ++ ++ /* ++ * Check if Flash is (sufficiently) erased ++ */ ++ result = *addr; ++ if ((result & data) != data) ++ return ERR_NOT_ERASED; ++ ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; ++ *addr = CMD_PROGRAM; ++ *addr = data; ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ /* wait until flash is ready */ ++ chip = 0; ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { ++ chip = ERR | TMO; ++ break; ++ } ++ if (!chip && ((result & 0x80) == (data & 0x80))) ++ chip = READY; ++ ++ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { ++ result = *addr; ++ ++ if ((result & 0x80) == (data & 0x80)) ++ chip = READY; ++ else ++ chip = ERR; ++ } ++ ++ } while (!chip); ++ ++ *addr = CMD_READ_ARRAY; ++ ++ if (chip == ERR || *addr != data) ++ rc = ERR_PROG_ERROR; ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash. ++ */ ++ ++int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) ++{ ++ ulong cp, wp; ++ int l; ++ int i, rc; ++ ushort data; ++ ++ wp = (addr & ~1); /* get lower word aligned address */ ++ ++ /* ++ * handle unaligned start bytes ++ */ ++ if ((l = addr - wp) != 0) { ++ data = 0; ++ for (i = 0, cp = wp; i < l; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ for (; i < 2 && cnt > 0; ++i) { ++ data = (data >> 8) | (*src++ << 8); ++ --cnt; ++ ++cp; ++ } ++ for (; cnt == 0 && i < 2; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ ++ if ((rc = write_hword (info, wp, data)) != 0) { ++ return (rc); ++ } ++ wp += 2; ++ } ++ ++ /* ++ * handle word aligned part ++ */ ++ while (cnt >= 2) { ++ data = *((vu_short *) src); ++ if ((rc = write_hword (info, wp, data)) != 0) { ++ return (rc); ++ } ++ src += 2; ++ wp += 2; ++ cnt -= 2; ++ } ++ ++ if (cnt == 0) { ++ return ERR_OK; ++ } ++ ++ /* ++ * handle unaligned tail bytes ++ */ ++ data = 0; ++ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { ++ data = (data >> 8) | (*src++ << 8); ++ --cnt; ++ } ++ for (; i < 2; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ ++ return write_hword (info, wp, data); ++} +Index: u-boot/board/smdk2440/lowlevel_init.S +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/lowlevel_init.S +@@ -0,0 +1,167 @@ ++/* ++ * Memory Setup stuff - taken from blob memsetup.S ++ * ++ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and ++ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) ++ * ++ * Modified for the Samsung SMDK2410 by ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include <config.h> ++#include <version.h> ++ ++ ++/* some parameters for the board */ ++ ++/* ++ * ++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S ++ * ++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> ++ * ++ */ ++ ++#define BWSCON 0x48000000 ++ ++/* BWSCON */ ++#define DW8 (0x0) ++#define DW16 (0x1) ++#define DW32 (0x2) ++#define WAIT (0x1<<2) ++#define UBLB (0x1<<3) ++ ++#define B1_BWSCON (DW32) ++#define B2_BWSCON (DW16) ++#define B3_BWSCON (DW16 + WAIT + UBLB) ++#define B4_BWSCON (DW16) ++#define B5_BWSCON (DW16) ++#define B6_BWSCON (DW32) ++#define B7_BWSCON (DW32) ++ ++/* BANK0CON */ ++#define B0_Tacs 0x0 /* 0clk */ ++#define B0_Tcos 0x0 /* 0clk */ ++#define B0_Tacc 0x7 /* 14clk */ ++#define B0_Tcoh 0x0 /* 0clk */ ++#define B0_Tah 0x0 /* 0clk */ ++#define B0_Tacp 0x0 ++#define B0_PMC 0x0 /* normal */ ++ ++/* BANK1CON */ ++#define B1_Tacs 0x0 /* 0clk */ ++#define B1_Tcos 0x0 /* 0clk */ ++#define B1_Tacc 0x7 /* 14clk */ ++#define B1_Tcoh 0x0 /* 0clk */ ++#define B1_Tah 0x0 /* 0clk */ ++#define B1_Tacp 0x0 ++#define B1_PMC 0x0 ++ ++#define B2_Tacs 0x0 ++#define B2_Tcos 0x0 ++#define B2_Tacc 0x7 ++#define B2_Tcoh 0x0 ++#define B2_Tah 0x0 ++#define B2_Tacp 0x0 ++#define B2_PMC 0x0 ++ ++#define B3_Tacs 0x0 /* 0clk */ ++#define B3_Tcos 0x3 /* 4clk */ ++#define B3_Tacc 0x7 /* 14clk */ ++#define B3_Tcoh 0x1 /* 1clk */ ++#define B3_Tah 0x0 /* 0clk */ ++#define B3_Tacp 0x3 /* 6clk */ ++#define B3_PMC 0x0 /* normal */ ++ ++#define B4_Tacs 0x0 /* 0clk */ ++#define B4_Tcos 0x0 /* 0clk */ ++#define B4_Tacc 0x7 /* 14clk */ ++#define B4_Tcoh 0x0 /* 0clk */ ++#define B4_Tah 0x0 /* 0clk */ ++#define B4_Tacp 0x0 ++#define B4_PMC 0x0 /* normal */ ++ ++#define B5_Tacs 0x0 /* 0clk */ ++#define B5_Tcos 0x0 /* 0clk */ ++#define B5_Tacc 0x7 /* 14clk */ ++#define B5_Tcoh 0x0 /* 0clk */ ++#define B5_Tah 0x0 /* 0clk */ ++#define B5_Tacp 0x0 ++#define B5_PMC 0x0 /* normal */ ++ ++#define B6_MT 0x3 /* SDRAM */ ++#define B6_Trcd 0x1 ++#define B6_SCAN 0x1 /* 9bit */ ++ ++#define B7_MT 0x3 /* SDRAM */ ++#define B7_Trcd 0x1 /* 3clk */ ++#define B7_SCAN 0x1 /* 9bit */ ++ ++/* REFRESH parameter */ ++#define REFEN 0x1 /* Refresh enable */ ++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ ++#define Trp 0x0 /* 2clk */ ++#define Trc 0x3 /* 7clk */ ++#define Tchr 0x2 /* 3clk */ ++#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ ++/**************************************/ ++ ++_TEXT_BASE: ++ .word TEXT_BASE ++ ++.globl lowlevel_init ++lowlevel_init: ++ /* memory control configuration */ ++ /* make r0 relative the current location so that it */ ++ /* reads SMRDATA out of FLASH rather than memory ! */ ++ ldr r0, =SMRDATA ++ ldr r1, _TEXT_BASE ++ sub r0, r0, r1 ++ ldr r1, =BWSCON /* Bus Width Status Controller */ ++ add r2, r0, #13*4 ++0: ++ ldr r3, [r0], #4 ++ str r3, [r1], #4 ++ cmp r2, r0 ++ bne 0b ++ ++ /* everything is fine now */ ++ mov pc, lr ++ ++ .ltorg ++/* the literal pools origin */ ++ ++SMRDATA: ++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) ++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) ++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) ++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) ++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) ++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) ++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) ++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) ++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) ++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) ++ .word 0x32 ++ .word 0x30 ++ .word 0x30 +Index: u-boot/board/smdk2440/smdk2440.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/smdk2440.c +@@ -0,0 +1,152 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <s3c2440.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#define FCLK_SPEED 1 ++ ++#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ ++#define M_MDIV 0xC3 ++#define M_PDIV 0x4 ++#define M_SDIV 0x1 ++#elif FCLK_SPEED==1 /* Fout = 399.65MHz */ ++#define M_MDIV 0x6e ++#define M_PDIV 0x3 ++#define M_SDIV 0x1 ++#endif ++ ++#define USB_CLOCK 1 ++ ++#if USB_CLOCK==0 ++#define U_M_MDIV 0xA1 ++#define U_M_PDIV 0x3 ++#define U_M_SDIV 0x1 ++#elif USB_CLOCK==1 ++#define U_M_MDIV 0x3c ++#define U_M_PDIV 0x4 ++#define U_M_SDIV 0x2 ++#endif ++ ++static inline void delay (unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" ++ "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0" (loops)); ++} ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* to reduce PLL lock time, adjust the LOCKTIME register */ ++ clk_power->LOCKTIME = 0xFFFFFF; ++ ++ /* configure MPLL */ ++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (4000); ++ ++ /* configure UPLL */ ++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (8000); ++ ++ /* set up the I/O ports */ ++ gpio->GPACON = 0x007FFFFF; ++ gpio->GPBCON = 0x002a9655; ++ gpio->GPBUP = 0x000007FF; ++ gpio->GPCCON = 0xAAAAAAAA; ++ gpio->GPCUP = 0x0000FFFF; ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ gpio->GPECON = 0xAAAAAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ gpio->GPFCON = 0x000055AA; ++ gpio->GPFUP = 0x000000FF; ++ gpio->GPGCON = 0xFD95FFBA; ++ gpio->GPGUP = 0x0000FFFF; ++#ifdef CONFIG_SERIAL3 ++ gpio->GPHCON = 0x002AAAAA; ++#else ++ gpio->GPHCON = 0x002AFAAA; ++#endif ++ gpio->GPHUP = 0x000007FF; ++ ++ gpio->GPJCON = 0x2AAAAAA; ++ ++#if 0 ++ /* USB Device Part */ ++ /*GPGCON is reset for USB Device */ ++ gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */ ++ gpio->GPGUP = gpio->GPGUP | ( 1 << 12); /* Pull up disable */ ++ ++ gpio->GPGDAT |= ( 1 << 12) ; ++ gpio->GPGDAT &= ~( 1 << 12) ; ++ udelay(20000); ++ gpio->GPGDAT |= ( 1 << 12) ; ++#endif ++ ++ /* arch number of SMDK2440-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_S3C2440; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0x30000100; ++ ++ icache_enable(); ++ dcache_enable(); ++ ++ return 0; ++} ++ ++int dram_init (void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} ++ ++/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. ++ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 ++ images: 640*480*2*2 = 1228800 < 1245184. */ ++ ++unsigned int dynpart_size[] = { ++ CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; ++char *dynpart_names[] = { ++ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; ++ ++ +Index: u-boot/board/smdk2440/u-boot.lds +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/u-boot.lds +@@ -0,0 +1,58 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/arm920t/start.o (.text) ++ cpu/arm920t/s3c24x0/nand_read.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/board/smdk2440/udc.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/udc.c +@@ -0,0 +1,23 @@ ++ ++#include <common.h> ++#include <usbdcore.h> ++#include <s3c2440.h> ++ ++void udc_ctrl(enum usbd_event event, int param) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ switch (event) { ++ case UDC_CTRL_PULLUP_ENABLE: ++ if (param) ++ gpio->GPGDAT |= (1 << 12); ++ else ++ gpio->GPGDAT &= ~(1 << 12); ++ break; ++ case UDC_CTRL_500mA_ENABLE: ++ /* IGNORE */ ++ break; ++ default: ++ break; ++ } ++} +Index: u-boot/board/smdk2440/lowlevel_foo.S +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/lowlevel_foo.S +@@ -0,0 +1,82 @@ ++ ++_start: ++ b reset ++undefvec: ++ b undefvec ++swivec: ++ b swivec ++pabtvec: ++ b pabtvec ++dabtvec: ++ b dabtvec ++rsvdvec: ++ b rsvdvec ++irqvec: ++ b irqvec ++fiqvec: ++ b fiqvec ++ ++reset: ++ /* ++ * set the cpu to SVC32 mode ++ */ ++ mrs r0,cpsr ++ bic r0,r0,#0x1f ++ orr r0,r0,#0xd3 ++ msr cpsr,r0 ++ ++/* turn off the watchdog */ ++#define pWTCON 0x53000000 ++#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ ++#define INTSUBMSK 0x4A00001C ++#define CLKDIVN 0x4C000014 /* clock divisor register */ ++ ++ ldr r0, =pWTCON ++ mov r1, #0x0 ++ str r1, [r0] ++ ++ mov r1, #0xffffffff ++ ldr r0, =INTMSK ++ str r1, [r0] ++ ldr r1, =0x3ff ++ ldr r0, =INTSUBMSK ++ str r1, [r0] ++ ++ /* FCLK:HCLK:PCLK = 1:2:4 */ ++ /* default FCLK is 120 MHz ! */ ++ ldr r0, =CLKDIVN ++ mov r1, #3 ++ str r1, [r0] ++ ++ bl cpu_init_crit ++ ldr r0,=TEXT_BASE ++ mov pc, r0 ++ ++cpu_init_crit: ++ /* ++ * flush v4 I/D caches ++ */ ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ ++ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ ++ ++ /* ++ * disable MMU stuff and caches ++ */ ++ mrc p15, 0, r0, c1, c0, 0 ++ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) ++ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) ++ orr r0, r0, #0x00000002 @ set bit 2 (A) Align ++ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache ++ mcr p15, 0, r0, c1, c0, 0 ++ ++ /* ++ * before relocating, we have to setup RAM timing ++ * because memory timing is board-dependend, you will ++ * find a lowlevel_init.S in your board directory. ++ */ ++ mov ip, lr ++ bl lowlevel_init ++ mov lr, ip ++ mov pc, lr ++ +Index: u-boot/board/smdk2440/lowlevel_foo.lds +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/lowlevel_foo.lds +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ lowlevel_foo.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} |