diff options
Diffstat (limited to 'packages/uboot/files/gta01_nand.h')
| -rw-r--r-- | packages/uboot/files/gta01_nand.h | 233 |
1 files changed, 0 insertions, 233 deletions
diff --git a/packages/uboot/files/gta01_nand.h b/packages/uboot/files/gta01_nand.h deleted file mode 100644 index 04cb743158..0000000000 --- a/packages/uboot/files/gta01_nand.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * (C) Copyright 2006 Harald Welte <hwelte@hmw-consulting.de> - * - * Configuation settings for the FIC GTA01 Linux GSM phone - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* we want to start u-boot directly from within NAND flash */ -#define CONFIG_S3C2410_NAND_BOOT 1 - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */ - - -#define USE_920T_MMU 1 -#define CONFIG_USE_IRQ 1 - -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */ -//#define CONFIG_HWFLOW 1 - -/************************************************************ - * RTC - ************************************************************/ -#define CONFIG_RTC_S3C24X0 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS (\ - CFG_CMD_BDI | \ - CFG_CMD_LOADS | \ - CFG_CMD_LAODB | \ - CFG_CMD_IMI | \ - CFG_CMD_CACHE | \ - CFG_CMD_MEMORY | \ - CFG_CMD_ENV | \ - /* CFG_CMD_IRQ | */ \ - CFG_CMD_BOOTD | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_ASKENV | \ - CFG_CMD_RUN | \ - CFG_CMD_ECHO | \ - CFG_CMD_I2C | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_DATE | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - CFG_CMD_MISC | \ - CFG_CMD_USB | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DIAG | \ - /* CFG_CMD_HWFLOW | */ \ - CFG_CMD_SAVES | \ - CFG_CMD_NAND | \ - CFG_CMD_PORTIO | \ - CFG_CMD_MMC | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - 0) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" -/*#define CONFIG_BOOTFILE "elinos-lart" */ -#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000" - -#define CONFIG_DOS_PARTITION 1 - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR 0x33000000 /* default load address */ - -/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -/* it to wrap 100 times (total 1562500) to get 1 sec. */ -#define CFG_HZ 1562500 - -/* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -#define CONFIG_USB_OHCI 1 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#if 1 -#define CFG_NO_FLASH 1 -#else -#define CFG_MAX_FLASH_SECT 1 -#define CFG_MAX_FLASH_BANKS 1 -#endif - -#define CFG_ENV_IS_IN_NAND 1 -#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ -#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */ - -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE 0x4e000000 -#define CFG_MAX_NAND_DEVICE 1 - -#define CONFIG_MMC 1 -#define CFG_MMC_BASE 0xff000000 - -/* EXT2 driver */ -#define CONFIG_EXT2 1 - -/* FAT driver in u-boot is broken currently */ -#define CONFIG_FAT 1 -#define CONFIG_SUPPORT_VFAT 1 - -/* JFFS2 driver */ -#define CONFIG_JFFS2_NAND 1 -#define CONFIG_JFFS2_NAND_DEV 0 -#define CONFIG_JFFS2_NAND_OFF 0x634000 -#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 - -/* ATAG configuration */ -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 -#if 0 -#define CONFIG_SERIAL_TAG 1 -#define CONFIG_REVISION_TAG 1 -#endif - -#define CONFIG_DRIVER_S3C24X0_I2C 1 -#define CONFIG_HARD_I2C 1 -#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50707 data sheet */ -#define CFG_I2C_SLAVE 0x7f - - -#if 0 -#define CONFIG_VIDEO -#define CONFIG_VIDEO_S3C2410 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE - -#define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc - -#define LCD_VIDEO_ADDR 0x33d00000 -#endif - -#endif /* __CONFIG_H */ |