summaryrefslogtreecommitdiff
path: root/packages/u-boot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'packages/u-boot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff')
-rw-r--r--packages/u-boot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff2286
1 files changed, 0 insertions, 2286 deletions
diff --git a/packages/u-boot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff b/packages/u-boot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff
deleted file mode 100644
index 02027b1062..0000000000
--- a/packages/u-boot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff
+++ /dev/null
@@ -1,2286 +0,0 @@
-diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
-new file mode 100644
-index 0000000..6c76ef6
---- /dev/null
-+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
-@@ -0,0 +1,183 @@
-+/*
-+ * Device Tree Souce for Buffalo KuroboxHG
-+ *
-+ * Based on sandpoint.dts
-+ *
-+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
-+ *
-+ * This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+
-+XXXX add flash parts, rtc, ??
-+
-+build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
-+
-+
-+ */
-+
-+/ {
-+ linux,phandle = <1000>;
-+ model = "KuroboxHG";
-+ compatible = "linkstation";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ cpus {
-+ linux,phandle = <2000>;
-+ #cpus = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ PowerPC,603e { /* Really 8241 */
-+ linux,phandle = <2100>;
-+ linux,boot-cpu;
-+ device_type = "cpu";
-+ reg = <0>;
-+ clock-frequency = <fdad680>; /* Fixed by bootwrapper */
-+ timebase-frequency = <1F04000>; /* Fixed by bootwrapper */
-+ bus-frequency = <0>; /* From bootloader */
-+ /* Following required by dtc but not used */
-+ i-cache-line-size = <0>;
-+ d-cache-line-size = <0>;
-+ i-cache-size = <4000>;
-+ d-cache-size = <4000>;
-+ };
-+ };
-+
-+ memory {
-+ linux,phandle = <3000>;
-+ device_type = "memory";
-+ reg = <00000000 08000000>;
-+ };
-+
-+ soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
-+ linux,phandle = <4000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ #interrupt-cells = <2>;
-+ device_type = "soc";
-+ compatible = "mpc10x";
-+ store-gathering = <0>; /* 0 == off, !0 == on */
-+ reg = <80000000 00100000>;
-+ ranges = <80000000 80000000 70000000 /* pci mem space */
-+ fc000000 fc000000 00100000 /* EUMB */
-+ fe000000 fe000000 00c00000 /* pci i/o space */
-+ fec00000 fec00000 00300000 /* pci cfg regs */
-+ fef00000 fef00000 00100000>; /* pci iack */
-+
-+ dma@80001100 {
-+ linux,phandle = <4100>;
-+ #interrupt-cells = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "dma";
-+ compatible = "fsl-dma";
-+ clock-frequency = <0>;
-+ reg = <80001100 24>;
-+ interrupts = <6 0>;
-+ interrupt-parent = <4400>;
-+ };
-+
-+ dma@80001200 {
-+ linux,phandle = <4200>;
-+ #interrupt-cells = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "dma";
-+ compatible = "fsl-dma";
-+ clock-frequency = <0>;
-+ reg = <80001200 24>;
-+ interrupts = <7 0>;
-+ interrupt-parent = <4400>;
-+ };
-+
-+ i2c@80003000 {
-+ linux,phandle = <4300>;
-+ device_type = "i2c";
-+ compatible = "fsl-i2c";
-+ clock-frequency = <0>;
-+ reg = <80003000 1000>;
-+ interrupts = <5 2>;
-+ interrupt-parent = <4400>;
-+ };
-+
-+ serial@80004500 {
-+ linux,phandle = <4511>;
-+ device_type = "serial";
-+ compatible = "ns16550";
-+ reg = <80004500 8>;
-+ clock-frequency = <7c044a8>;
-+ current-speed = <2580>;
-+ interrupts = <9 2>;
-+ interrupt-parent = <4400>;
-+ };
-+
-+ serial@80004600 {
-+ linux,phandle = <4512>;
-+ device_type = "serial";
-+ compatible = "ns16550";
-+ reg = <80004600 8>;
-+ clock-frequency = <7c044a8>;
-+ current-speed = <e100>;
-+ interrupts = <a 0>;
-+ interrupt-parent = <4400>;
-+ };
-+
-+ pic@80040000 {
-+ linux,phandle = <4400>;
-+ #interrupt-cells = <2>;
-+ #address-cells = <0>;
-+ device_type = "open-pic";
-+ compatible = "chrp,open-pic";
-+ interrupt-controller;
-+ reg = <80040000 40000>;
-+ clock-frequency = <0>; /* ??? */
-+ built-in;
-+ };
-+
-+ pci@fec00000 {
-+ linux,phandle = <4500>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ device_type = "pci";
-+ compatible = "mpc10x-pci";
-+ reg = <fec00000 400000>;
-+ ranges = <01000000 0 0 fe000000 0 00c00000
-+ 02000000 0 80000000 80000000 0 70000000>;
-+ bus-range = <0 ff>;
-+ clock-frequency = <7f28155>;
-+ interrupt-parent = <4400>;
-+ interrupt-map-mask = <f800 0 0 7>;
-+ interrupt-map = <
-+ /* IDSEL 0x11 - IRQ0 ETH */
-+ 5800 0 0 1 4400 0 1
-+ 5800 0 0 2 4400 1 1
-+ 5800 0 0 3 4400 2 1
-+ 5800 0 0 4 4400 3 1
-+ /* IDSEL 0x12 - IRQ1 IDE0 */
-+ 6000 0 0 1 4400 1 1
-+ 6000 0 0 2 4400 2 1
-+ 6000 0 0 3 4400 3 1
-+ 6000 0 0 4 4400 0 1
-+ /* IDSEL 0x13 - IRQ4 IDE1 */
-+ 6800 0 0 1 4400 3 1
-+ 6800 0 0 2 4400 0 1
-+ 6800 0 0 3 4400 1 1
-+ 6800 0 0 4 4400 2 1
-+ /* IDSEL 0x14 - IRQ3 USB2.0 */
-+ 7000 0 0 1 4400 3 1
-+ 7000 0 0 2 4400 3 1
-+ 7000 0 0 3 4400 3 1
-+ 7000 0 0 4 4400 3 1
-+ /* IDSEL 0x15 - IRQ2 fan ctrl*/
-+ 7800 0 0 1 4400 2 1
-+ 7800 0 0 2 4400 3 1
-+ 7800 0 0 3 4400 0 1
-+ 7800 0 0 4 4400 1 1
-+ >;
-+ };
-+ };
-+};
-diff --git a/arch/powerpc/configs/kuroboxhg_defconfig b/arch/powerpc/configs/kuroboxhg_defconfig
-new file mode 100644
-index 0000000..136632f
---- /dev/null
-+++ b/arch/powerpc/configs/kuroboxhg_defconfig
-@@ -0,0 +1,1577 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.19-rc2
-+# Wed Nov 1 16:56:07 2006
-+#
-+# CONFIG_PPC64 is not set
-+CONFIG_PPC32=y
-+CONFIG_PPC_MERGE=y
-+CONFIG_MMU=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_IRQ_PER_CPU=y
-+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_FIND_NEXT_BIT=y
-+CONFIG_PPC=y
-+CONFIG_EARLY_PRINTK=y
-+CONFIG_GENERIC_NVRAM=y
-+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-+CONFIG_PPC_OF=y
-+CONFIG_PPC_UDBG_16550=y
-+# CONFIG_GENERIC_TBSYNC is not set
-+CONFIG_AUDIT_ARCH=y
-+# CONFIG_DEFAULT_UIMAGE is not set
-+
-+#
-+# Processor support
-+#
-+CONFIG_CLASSIC32=y
-+# CONFIG_PPC_52xx is not set
-+# CONFIG_PPC_82xx is not set
-+# CONFIG_PPC_83xx is not set
-+# CONFIG_PPC_85xx is not set
-+# CONFIG_PPC_86xx is not set
-+# CONFIG_40x is not set
-+# CONFIG_44x is not set
-+# CONFIG_8xx is not set
-+# CONFIG_E200 is not set
-+CONFIG_6xx=y
-+CONFIG_PPC_FPU=y
-+# CONFIG_ALTIVEC is not set
-+CONFIG_PPC_STD_MMU=y
-+CONFIG_PPC_STD_MMU_32=y
-+# CONFIG_SMP is not set
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION="-kuroboxHG"
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_POSIX_MQUEUE=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+# CONFIG_RELAY is not set
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+
-+#
-+# Platform support
-+#
-+# CONFIG_PPC_MULTIPLATFORM is not set
-+CONFIG_EMBEDDED6xx=y
-+# CONFIG_APUS is not set
-+# CONFIG_PPC_CELL is not set
-+# CONFIG_PPC_CELL_NATIVE is not set
-+# CONFIG_PPC_RTAS is not set
-+# CONFIG_MMIO_NVRAM is not set
-+# CONFIG_PPC_MPC106 is not set
-+# CONFIG_PPC_970_NAP is not set
-+# CONFIG_CPU_FREQ is not set
-+# CONFIG_TAU is not set
-+# CONFIG_KATANA is not set
-+# CONFIG_WILLOW is not set
-+# CONFIG_CPCI690 is not set
-+# CONFIG_POWERPMC250 is not set
-+# CONFIG_CHESTNUT is not set
-+# CONFIG_SPRUCE is not set
-+# CONFIG_HDPU is not set
-+# CONFIG_EV64260 is not set
-+# CONFIG_LOPEC is not set
-+# CONFIG_MVME5100 is not set
-+# CONFIG_PPLUS is not set
-+# CONFIG_PRPMC750 is not set
-+# CONFIG_PRPMC800 is not set
-+# CONFIG_SANDPOINT is not set
-+CONFIG_LINKSTATION=y
-+# CONFIG_MPC7448HPC2 is not set
-+# CONFIG_RADSTONE_PPC7D is not set
-+# CONFIG_PAL4 is not set
-+# CONFIG_GEMINI is not set
-+# CONFIG_EST8260 is not set
-+# CONFIG_SBC82xx is not set
-+# CONFIG_SBS8260 is not set
-+# CONFIG_RPX8260 is not set
-+# CONFIG_TQM8260 is not set
-+# CONFIG_ADS8272 is not set
-+# CONFIG_PQ2FADS is not set
-+# CONFIG_LITE5200 is not set
-+# CONFIG_EV64360 is not set
-+CONFIG_PPC_GEN550=y
-+CONFIG_MPC10X_BRIDGE=y
-+CONFIG_MPC10X_OPENPIC=y
-+# CONFIG_MPC10X_STORE_GATHERING is not set
-+# CONFIG_WANT_EARLY_SERIAL is not set
-+CONFIG_MPIC=y
-+
-+#
-+# Kernel options
-+#
-+# CONFIG_HIGHMEM is not set
-+CONFIG_HZ_100=y
-+# CONFIG_HZ_250 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=100
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+CONFIG_ARCH_POPULATES_NODE_MAP=y
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_PROC_DEVICETREE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS1,57600 root=/dev/sdd1 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32"
-+# CONFIG_PM is not set
-+# CONFIG_SECCOMP is not set
-+CONFIG_ISA_DMA_API=y
-+
-+#
-+# Bus options
-+#
-+CONFIG_GENERIC_ISA_DMA=y
-+# CONFIG_MPIC_WEIRD is not set
-+# CONFIG_PPC_I8259 is not set
-+CONFIG_PPC_INDIRECT_PCI=y
-+CONFIG_FSL_SOC=y
-+CONFIG_PCI=y
-+CONFIG_PCI_DOMAINS=y
-+# CONFIG_PCIEPORTBUS is not set
-+# CONFIG_PCI_MULTITHREAD_PROBE is not set
-+# CONFIG_PCI_DEBUG is not set
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# PCI Hotplug Support
-+#
-+# CONFIG_HOTPLUG_PCI is not set
-+
-+#
-+# Advanced setup
-+#
-+# CONFIG_ADVANCED_OPTIONS is not set
-+
-+#
-+# Default settings for advanced configuration options are used
-+#
-+CONFIG_HIGHMEM_START=0xfe000000
-+CONFIG_LOWMEM_SIZE=0x30000000
-+CONFIG_KERNEL_START=0xc0000000
-+CONFIG_TASK_SIZE=0x80000000
-+CONFIG_BOOT_LOAD=0x00800000
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+
-+#
-+# IP: Virtual Server Configuration
-+#
-+# CONFIG_IP_VS is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+
-+#
-+# Core Netfilter Configuration
-+#
-+# CONFIG_NETFILTER_NETLINK is not set
-+CONFIG_NETFILTER_XTABLES=m
-+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-+CONFIG_NETFILTER_XT_TARGET_MARK=m
-+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-+CONFIG_NETFILTER_XT_MATCH_ESP=m
-+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-+CONFIG_NETFILTER_XT_MATCH_MAC=m
-+CONFIG_NETFILTER_XT_MATCH_MARK=m
-+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-+
-+#
-+# IP: Netfilter Configuration
-+#
-+CONFIG_IP_NF_CONNTRACK=m
-+# CONFIG_IP_NF_CT_ACCT is not set
-+# CONFIG_IP_NF_CONNTRACK_MARK is not set
-+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-+CONFIG_IP_NF_FTP=m
-+CONFIG_IP_NF_IRC=m
-+# CONFIG_IP_NF_NETBIOS_NS is not set
-+CONFIG_IP_NF_TFTP=m
-+# CONFIG_IP_NF_AMANDA is not set
-+# CONFIG_IP_NF_PPTP is not set
-+# CONFIG_IP_NF_H323 is not set
-+# CONFIG_IP_NF_SIP is not set
-+# CONFIG_IP_NF_QUEUE is not set
-+CONFIG_IP_NF_IPTABLES=m
-+CONFIG_IP_NF_MATCH_IPRANGE=m
-+# CONFIG_IP_NF_MATCH_TOS is not set
-+# CONFIG_IP_NF_MATCH_RECENT is not set
-+# CONFIG_IP_NF_MATCH_ECN is not set
-+# CONFIG_IP_NF_MATCH_AH is not set
-+# CONFIG_IP_NF_MATCH_TTL is not set
-+# CONFIG_IP_NF_MATCH_OWNER is not set
-+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-+CONFIG_IP_NF_FILTER=m
-+CONFIG_IP_NF_TARGET_REJECT=m
-+# CONFIG_IP_NF_TARGET_LOG is not set
-+# CONFIG_IP_NF_TARGET_ULOG is not set
-+# CONFIG_IP_NF_TARGET_TCPMSS is not set
-+CONFIG_IP_NF_NAT=m
-+CONFIG_IP_NF_NAT_NEEDED=y
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+CONFIG_IP_NF_TARGET_REDIRECT=m
-+CONFIG_IP_NF_TARGET_NETMAP=m
-+CONFIG_IP_NF_TARGET_SAME=m
-+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-+CONFIG_IP_NF_NAT_IRC=m
-+CONFIG_IP_NF_NAT_FTP=m
-+CONFIG_IP_NF_NAT_TFTP=m
-+CONFIG_IP_NF_MANGLE=m
-+CONFIG_IP_NF_TARGET_TOS=m
-+CONFIG_IP_NF_TARGET_ECN=m
-+CONFIG_IP_NF_TARGET_TTL=m
-+CONFIG_IP_NF_RAW=m
-+CONFIG_IP_NF_ARPTABLES=m
-+CONFIG_IP_NF_ARPFILTER=m
-+CONFIG_IP_NF_ARP_MANGLE=m
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+CONFIG_IEEE80211=m
-+CONFIG_IEEE80211_DEBUG=y
-+CONFIG_IEEE80211_CRYPT_WEP=m
-+CONFIG_IEEE80211_CRYPT_CCMP=m
-+CONFIG_IEEE80211_CRYPT_TKIP=m
-+CONFIG_IEEE80211_SOFTMAC=m
-+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-+CONFIG_WIRELESS_EXT=y
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=m
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+# CONFIG_MTD_CMDLINE_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_JEDECPROBE=y
-+CONFIG_MTD_GEN_PROBE=y
-+CONFIG_MTD_CFI_ADV_OPTIONS=y
-+CONFIG_MTD_CFI_NOSWAP=y
-+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-+CONFIG_MTD_CFI_GEOMETRY=y
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+# CONFIG_MTD_CFI_I2 is not set
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_OTP is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0xffc00000
-+CONFIG_MTD_PHYSMAP_LEN=0x400000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+# CONFIG_MTD_NAND is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_FD is not set
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=2
-+CONFIG_BLK_DEV_RAM_SIZE=8192
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+CONFIG_BLK_DEV_INITRD=y
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# ATA/ATAPI/MFM/RLL support
-+#
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+CONFIG_CHR_DEV_SG=y
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_3W_9XXX is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC94XX is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ARCMSR is not set
-+# CONFIG_MEGARAID_NEWGEN is not set
-+# CONFIG_MEGARAID_LEGACY is not set
-+# CONFIG_MEGARAID_SAS is not set
-+# CONFIG_SCSI_HPTIOP is not set
-+# CONFIG_SCSI_BUSLOGIC is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_EATA is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_GDTH is not set
-+# CONFIG_SCSI_IPS is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_STEX is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_IPR is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_QLA_FC is not set
-+# CONFIG_SCSI_QLA_ISCSI is not set
-+# CONFIG_SCSI_LPFC is not set
-+# CONFIG_SCSI_DC395x is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+CONFIG_ATA=y
-+# CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_SVW is not set
-+# CONFIG_ATA_PIIX is not set
-+# CONFIG_SATA_MV is not set
-+# CONFIG_SATA_NV is not set
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_PROMISE is not set
-+# CONFIG_SATA_SX4 is not set
-+# CONFIG_SATA_SIL is not set
-+# CONFIG_SATA_SIL24 is not set
-+# CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_ULI is not set
-+# CONFIG_SATA_VIA is not set
-+# CONFIG_SATA_VITESSE is not set
-+# CONFIG_PATA_ALI is not set
-+# CONFIG_PATA_AMD is not set
-+# CONFIG_PATA_ARTOP is not set
-+# CONFIG_PATA_ATIIXP is not set
-+# CONFIG_PATA_CMD64X is not set
-+# CONFIG_PATA_CS5520 is not set
-+# CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CYPRESS is not set
-+# CONFIG_PATA_EFAR is not set
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_HPT366 is not set
-+# CONFIG_PATA_HPT37X is not set
-+# CONFIG_PATA_HPT3X2N is not set
-+# CONFIG_PATA_HPT3X3 is not set
-+# CONFIG_PATA_IT821X is not set
-+# CONFIG_PATA_JMICRON is not set
-+# CONFIG_PATA_TRIFLEX is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_OLDPIIX is not set
-+# CONFIG_PATA_NETCELL is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC_OLD is not set
-+# CONFIG_PATA_RADISYS is not set
-+# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SERVERWORKS is not set
-+# CONFIG_PATA_PDC2027X is not set
-+CONFIG_PATA_SIL680=y
-+# CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_VIA is not set
-+# CONFIG_PATA_WINBOND is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+# CONFIG_FUSION_SPI is not set
-+# CONFIG_FUSION_FC is not set
-+# CONFIG_FUSION_SAS is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+# CONFIG_IEEE1394 is not set
-+
-+#
-+# I2O device support
-+#
-+# CONFIG_I2O is not set
-+
-+#
-+# Macintosh device drivers
-+#
-+# CONFIG_WINDFARM is not set
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+
-+#
-+# ARCnet devices
-+#
-+# CONFIG_ARCNET is not set
-+
-+#
-+# PHY device support
-+#
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+# CONFIG_NET_ETHERNET is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+# CONFIG_E1000 is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+CONFIG_R8169=y
-+# CONFIG_R8169_NAPI is not set
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_SK98LIN is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+# CONFIG_QLA3XXX is not set
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+# CONFIG_CHELSIO_T1 is not set
-+# CONFIG_IXGB is not set
-+# CONFIG_S2IO is not set
-+# CONFIG_MYRI10GE is not set
-+
-+#
-+# Token Ring devices
-+#
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+CONFIG_NET_RADIO=y
-+# CONFIG_NET_WIRELESS_RTNETLINK is not set
-+
-+#
-+# Obsolete Wireless cards support (pre-802.11)
-+#
-+# CONFIG_STRIP is not set
-+
-+#
-+# Wireless 802.11b ISA/PCI cards support
-+#
-+# CONFIG_IPW2100 is not set
-+# CONFIG_IPW2200 is not set
-+# CONFIG_AIRO is not set
-+# CONFIG_HERMES is not set
-+# CONFIG_ATMEL is not set
-+
-+#
-+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-+#
-+# CONFIG_PRISM54 is not set
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-+# CONFIG_BCM43XX is not set
-+# CONFIG_ZD1211RW is not set
-+CONFIG_NET_WIRELESS=y
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_SHAPER is not set
-+CONFIG_NETCONSOLE=y
-+CONFIG_NETPOLL=y
-+# CONFIG_NETPOLL_RX is not set
-+# CONFIG_NETPOLL_TRAP is not set
-+CONFIG_NET_POLL_CONTROLLER=y
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Telephony Support
-+#
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+CONFIG_INPUT_MISC=y
-+CONFIG_INPUT_UINPUT=m
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+# CONFIG_SERIO_I8042 is not set
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_PCIPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_PCI=y
-+CONFIG_SERIAL_8250_NR_UARTS=4
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-+# CONFIG_SERIAL_8250_EXTENDED is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_NVRAM is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+
-+#
-+# Ftape, the floppy tape device driver
-+#
-+# CONFIG_AGP is not set
-+# CONFIG_DRM is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_TELCLOCK is not set
-+
-+#
-+# I2C support
-+#
-+CONFIG_I2C=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_I810 is not set
-+# CONFIG_I2C_PIIX4 is not set
-+CONFIG_I2C_MPC=y
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_PROSAVAGE is not set
-+# CONFIG_I2C_SAVAGE4 is not set
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+# CONFIG_I2C_VOODOO3 is not set
-+# CONFIG_I2C_PCA_ISA is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+CONFIG_SENSORS_EEPROM=m
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_M41T00 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+
-+#
-+# Hardware Monitoring support
-+#
-+CONFIG_HWMON=y
-+# CONFIG_HWMON_VID is not set
-+# CONFIG_SENSORS_ABITUGURU is not set
-+# CONFIG_SENSORS_ADM1021 is not set
-+# CONFIG_SENSORS_ADM1025 is not set
-+# CONFIG_SENSORS_ADM1026 is not set
-+# CONFIG_SENSORS_ADM1031 is not set
-+# CONFIG_SENSORS_ADM9240 is not set
-+# CONFIG_SENSORS_ASB100 is not set
-+# CONFIG_SENSORS_ATXP1 is not set
-+# CONFIG_SENSORS_DS1621 is not set
-+# CONFIG_SENSORS_F71805F is not set
-+# CONFIG_SENSORS_FSCHER is not set
-+# CONFIG_SENSORS_FSCPOS is not set
-+# CONFIG_SENSORS_GL518SM is not set
-+# CONFIG_SENSORS_GL520SM is not set
-+# CONFIG_SENSORS_IT87 is not set
-+# CONFIG_SENSORS_LM63 is not set
-+# CONFIG_SENSORS_LM75 is not set
-+# CONFIG_SENSORS_LM77 is not set
-+# CONFIG_SENSORS_LM78 is not set
-+# CONFIG_SENSORS_LM80 is not set
-+# CONFIG_SENSORS_LM83 is not set
-+# CONFIG_SENSORS_LM85 is not set
-+# CONFIG_SENSORS_LM87 is not set
-+# CONFIG_SENSORS_LM90 is not set
-+# CONFIG_SENSORS_LM92 is not set
-+# CONFIG_SENSORS_MAX1619 is not set
-+# CONFIG_SENSORS_PC87360 is not set
-+# CONFIG_SENSORS_SIS5595 is not set
-+# CONFIG_SENSORS_SMSC47M1 is not set
-+# CONFIG_SENSORS_SMSC47M192 is not set
-+# CONFIG_SENSORS_SMSC47B397 is not set
-+# CONFIG_SENSORS_VIA686A is not set
-+# CONFIG_SENSORS_VT1211 is not set
-+# CONFIG_SENSORS_VT8231 is not set
-+# CONFIG_SENSORS_W83781D is not set
-+# CONFIG_SENSORS_W83791D is not set
-+# CONFIG_SENSORS_W83792D is not set
-+# CONFIG_SENSORS_W83L785TS is not set
-+# CONFIG_SENSORS_W83627HF is not set
-+# CONFIG_SENSORS_W83627EHF is not set
-+# CONFIG_HWMON_DEBUG_CHIP is not set
-+
-+#
-+# Misc devices
-+#
-+# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+CONFIG_FIRMWARE_EDID=y
-+# CONFIG_FB is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_BANDWIDTH is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+CONFIG_USB_EHCI_HCD=y
-+# CONFIG_USB_EHCI_SPLIT_ISO is not set
-+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=m
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Input Devices
-+#
-+# CONFIG_USB_HID is not set
-+
-+#
-+# USB HID Boot Protocol drivers
-+#
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+# CONFIG_USB_AIPTEK is not set
-+# CONFIG_USB_WACOM is not set
-+# CONFIG_USB_ACECAD is not set
-+# CONFIG_USB_KBTAB is not set
-+# CONFIG_USB_POWERMATE is not set
-+# CONFIG_USB_TOUCHSCREEN is not set
-+# CONFIG_USB_YEALINK is not set
-+# CONFIG_USB_XPAD is not set
-+# CONFIG_USB_ATI_REMOTE is not set
-+# CONFIG_USB_ATI_REMOTE2 is not set
-+# CONFIG_USB_KEYSPAN_REMOTE is not set
-+# CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+CONFIG_USB_SERIAL=y
-+CONFIG_USB_SERIAL_CONSOLE=y
-+# CONFIG_USB_SERIAL_GENERIC is not set
-+# CONFIG_USB_SERIAL_AIRCABLE is not set
-+# CONFIG_USB_SERIAL_AIRPRIME is not set
-+# CONFIG_USB_SERIAL_ARK3116 is not set
-+# CONFIG_USB_SERIAL_BELKIN is not set
-+# CONFIG_USB_SERIAL_WHITEHEAT is not set
-+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-+# CONFIG_USB_SERIAL_CP2101 is not set
-+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-+# CONFIG_USB_SERIAL_EMPEG is not set
-+CONFIG_USB_SERIAL_FTDI_SIO=y
-+# CONFIG_USB_SERIAL_FUNSOFT is not set
-+# CONFIG_USB_SERIAL_VISOR is not set
-+# CONFIG_USB_SERIAL_IPAQ is not set
-+# CONFIG_USB_SERIAL_IR is not set
-+# CONFIG_USB_SERIAL_EDGEPORT is not set
-+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-+# CONFIG_USB_SERIAL_GARMIN is not set
-+# CONFIG_USB_SERIAL_IPW is not set
-+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-+# CONFIG_USB_SERIAL_KEYSPAN is not set
-+# CONFIG_USB_SERIAL_KLSI is not set
-+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-+# CONFIG_USB_SERIAL_MCT_U232 is not set
-+# CONFIG_USB_SERIAL_MOS7840 is not set
-+# CONFIG_USB_SERIAL_NAVMAN is not set
-+# CONFIG_USB_SERIAL_PL2303 is not set
-+# CONFIG_USB_SERIAL_HP4X is not set
-+# CONFIG_USB_SERIAL_SAFE is not set
-+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-+# CONFIG_USB_SERIAL_TI is not set
-+# CONFIG_USB_SERIAL_CYBERJACK is not set
-+# CONFIG_USB_SERIAL_XIRCOM is not set
-+# CONFIG_USB_SERIAL_OPTION is not set
-+# CONFIG_USB_SERIAL_OMNINET is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+# CONFIG_MMC is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
-+# InfiniBand support
-+#
-+# CONFIG_INFINIBAND is not set
-+
-+#
-+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-+#
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+
-+#
-+# RTC drivers
-+#
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+CONFIG_RTC_DRV_RS5C372=y
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+CONFIG_FS_POSIX_ACL=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+CONFIG_ISO9660_FS=m
-+CONFIG_JOLIET=y
-+CONFIG_ZISOFS=y
-+CONFIG_ZISOFS_FS=m
-+CONFIG_UDF_FS=m
-+CONFIG_UDF_NLS=y
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=m
-+# CONFIG_NTFS_DEBUG is not set
-+# CONFIG_NTFS_RW is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+CONFIG_NFS_V3_ACL=y
-+CONFIG_NFS_V4=y
-+# CONFIG_NFS_DIRECTIO is not set
-+CONFIG_NFSD=m
-+CONFIG_NFSD_V3=y
-+# CONFIG_NFSD_V3_ACL is not set
-+# CONFIG_NFSD_V4 is not set
-+CONFIG_NFSD_TCP=y
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_EXPORTFS=m
-+CONFIG_NFS_ACL_SUPPORT=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+CONFIG_SUNRPC_GSS=y
-+CONFIG_RPCSEC_GSS_KRB5=y
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+
-+#
-+# Library routines
-+#
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+CONFIG_LIBCRC32C=m
-+CONFIG_ZLIB_INFLATE=m
-+CONFIG_ZLIB_DEFLATE=m
-+CONFIG_PLIST=y
-+
-+#
-+# Instrumentation Support
-+#
-+CONFIG_PROFILING=y
-+CONFIG_OPROFILE=m
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_RWSEMS is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_DEBUGGER is not set
-+# CONFIG_BDI_SWITCH is not set
-+# CONFIG_BOOTX_TEXT is not set
-+# CONFIG_SERIAL_TEXT_DEBUG is not set
-+# CONFIG_PPC_EARLY_DEBUG is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+CONFIG_CRYPTO_MD4=m
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_CBC is not set
-+CONFIG_CRYPTO_DES=y
-+CONFIG_CRYPTO_BLOWFISH=m
-+CONFIG_CRYPTO_TWOFISH=m
-+CONFIG_CRYPTO_TWOFISH_COMMON=m
-+CONFIG_CRYPTO_SERPENT=m
-+CONFIG_CRYPTO_AES=m
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+CONFIG_CRYPTO_DEFLATE=m
-+CONFIG_CRYPTO_MICHAEL_MIC=m
-+CONFIG_CRYPTO_CRC32C=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Hardware crypto devices
-+#
-diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
-index 234a861..c1c6748 100644
---- a/arch/powerpc/platforms/embedded6xx/Kconfig
-+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
-@@ -76,6 +76,15 @@ config PRPMC800
- Select SANDPOINT if configuring for a Motorola Sandpoint X3
- (any flavor).
-
-+config LINKSTATION
-+ bool "Linkstation / Kurobox(HG) from Buffalo"
-+ select MPIC
-+ select FSL_SOC
-+ select PPC_UDBG_16550 if SERIAL_8250
-+ help
-+ Select LINKSTATION if configuring for a PPC-based Linkstation
-+ (LS-1) or Kurobox(HG) from Buffalo Technologies.
-+
- config MPC7448HPC2
- bool "Freescale MPC7448HPC2(Taiga)"
- select TSI108_BRIDGE
-@@ -210,7 +219,7 @@ config PPC_GEN550
- depends on SANDPOINT || SPRUCE || PPLUS || \
- PRPMC750 || PRPMC800 || LOPEC || \
- (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
-- 83xx
-+ 83xx || LINKSTATION
- default y
-
- config FORCE
-@@ -284,13 +293,13 @@ config HARRIER
-
- config MPC10X_BRIDGE
- bool
-- depends on POWERPMC250 || LOPEC || SANDPOINT
-+ depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
- select PPC_INDIRECT_PCI
- default y
-
- config MPC10X_OPENPIC
- bool
-- depends on POWERPMC250 || LOPEC || SANDPOINT
-+ depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
- default y
-
- config MPC10X_STORE_GATHERING
-diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
-index fa499fe..1f3edc7 100644
---- a/arch/powerpc/platforms/embedded6xx/Makefile
-+++ b/arch/powerpc/platforms/embedded6xx/Makefile
-@@ -3,3 +3,4 @@ #
- #
- obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
- obj-$(CONFIG_SANDPOINT) += sandpoint.o
-+obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
-diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
-new file mode 100644
-index 0000000..30bcb5b
---- /dev/null
-+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
-@@ -0,0 +1,254 @@
-+/*
-+ * arch/powerpc/platforms/embedded6xx/linkstation.c
-+ *
-+ * Board setup routines for the Buffalo Linkstation / Kurobox Platform.
-+ *
-+ * Author: Mark A. Greer
-+ * mgreer@mvista.com
-+ *
-+ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ */
-+
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/reboot.h>
-+#include <linux/pci.h>
-+#include <linux/kdev_t.h>
-+#include <linux/major.h>
-+#include <linux/initrd.h>
-+#include <linux/console.h>
-+#include <linux/delay.h>
-+#include <linux/ide.h>
-+#include <linux/seq_file.h>
-+#include <linux/root_dev.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h> /* for linux/serial_core.h */
-+#include <linux/serial_core.h>
-+#include <linux/serial_reg.h>
-+#include <linux/serial_8250.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/system.h>
-+#include <asm/pgtable.h>
-+#include <asm/page.h>
-+#include <asm/time.h>
-+#include <asm/dma.h>
-+#include <asm/io.h>
-+#include <asm/machdep.h>
-+#include <asm/prom.h>
-+#include <asm/smp.h>
-+#include <asm/vga.h>
-+#include <asm/i8259.h>
-+#include <asm/mpic.h>
-+#include <asm/todc.h>
-+#include <asm/bootinfo.h>
-+#include <asm/mpc10x.h>
-+#include <asm/pci-bridge.h>
-+#include <asm/ppc_sys.h>
-+
-+static struct mtd_partition linkstation_physmap_partitions[] = {
-+ {
-+ .name = "mtd_firmimg",
-+ .offset = 0x000000,
-+ .size = 0x300000,
-+ },
-+ {
-+ .name = "mtd_bootcode",
-+ .offset = 0x300000,
-+ .size = 0x70000,
-+ },
-+ {
-+ .name = "mtd_status",
-+ .offset = 0x370000,
-+ .size = 0x10000,
-+ },
-+ {
-+ .name = "mtd_conf",
-+ .offset = 0x380000,
-+ .size = 0x80000,
-+ },
-+ {
-+ .name = "mtd_allflash",
-+ .offset = 0x000000,
-+ .size = 0x400000,
-+ },
-+ {
-+ .name = "mtd_data",
-+ .offset = 0x310000,
-+ .size = 0xf0000,
-+ },
-+};
-+
-+/*
-+ * Buffalo linkstation interrupt routing.
-+ */
-+
-+void __init linkstation_pcibios_fixup(void)
-+{
-+ struct pci_dev *dev = NULL;
-+
-+ for_each_pci_dev(dev)
-+ pci_read_irq_line(dev);
-+}
-+
-+static int __init add_bridge(struct device_node *dev)
-+{
-+ int len;
-+ struct pci_controller *hose;
-+ int *bus_range;
-+
-+ printk("Adding PCI host bridge %s\n", dev->full_name);
-+
-+ bus_range = (int *) get_property(dev, "bus-range", &len);
-+ if (bus_range == NULL || len < 2 * sizeof(int))
-+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
-+ " bus 0\n", dev->full_name);
-+
-+ hose = pcibios_alloc_controller();
-+ if (hose == NULL)
-+ return -ENOMEM;
-+ hose->first_busno = bus_range ? bus_range[0] : 0;
-+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
-+ hose->arch_data = dev;
-+ setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
-+
-+ /* Interpret the "ranges" property */
-+ /* This also maps the I/O region and sets isa_io/mem_base */
-+ pci_process_bridge_OF_ranges(hose, dev, 1);
-+
-+ return 0;
-+}
-+
-+static void __init linkstation_setup_arch(void)
-+{
-+ struct device_node *np;
-+#ifdef CONFIG_MTD_PHYSMAP
-+ physmap_set_partitions(linkstation_physmap_partitions,
-+ ARRAY_SIZE(linkstation_physmap_partitions));
-+#endif
-+
-+#ifdef CONFIG_BLK_DEV_INITRD
-+ if (initrd_start)
-+ ROOT_DEV = Root_RAM0;
-+ else
-+#endif
-+#ifdef CONFIG_ROOT_NFS
-+ ROOT_DEV = Root_NFS;
-+#else
-+ ROOT_DEV = Root_HDA1;
-+#endif
-+
-+ /* Lookup PCI host bridges */
-+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
-+ add_bridge(np);
-+
-+ ppc_md.pci_swizzle = common_swizzle;
-+
-+ printk(KERN_INFO "BUFFALO Network Attached Storage Series\n");
-+ printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n");
-+}
-+
-+/*
-+ * Interrupt setup and service. Interrrupts on the linkstation come
-+ * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
-+ */
-+static void __init linkstation_init_IRQ(void)
-+{
-+ struct mpic *mpic;
-+ struct device_node *dnp;
-+ void *prop;
-+ int size;
-+ phys_addr_t paddr;
-+
-+ dnp = of_find_node_by_type(NULL, "open-pic");
-+ if (dnp == NULL)
-+ return;
-+
-+ prop = (struct device_node *)get_property(dnp, "reg", &size);
-+ paddr = (phys_addr_t)of_translate_address(dnp, prop);
-+
-+ mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC ");
-+ BUG_ON(mpic == NULL);
-+
-+ /* PCI IRQs */
-+ mpic_assign_isu(mpic, 0, paddr + 0x10200);
-+
-+ /* I2C */
-+ mpic_assign_isu(mpic, 1, paddr + 0x11000);
-+
-+ /* ttyS0, ttyS1 */
-+ mpic_assign_isu(mpic, 2, paddr + 0x11100);
-+
-+ mpic_init(mpic);
-+}
-+
-+extern void avr_uart_configure(void);
-+extern void avr_uart_send(const char);
-+
-+static void linkstation_restart(char *cmd)
-+{
-+ local_irq_disable();
-+
-+ /* Reset system via AVR */
-+ avr_uart_configure();
-+ /* Send reboot command */
-+ avr_uart_send('C');
-+
-+ for(;;) /* Spin until reset happens */
-+ avr_uart_send('G'); /* "kick" */
-+}
-+
-+static void linkstation_power_off(void)
-+{
-+ local_irq_disable();
-+
-+ avr_uart_configure();
-+ /* send shutdown command */
-+ avr_uart_send('E');
-+
-+ for(;;) /* Spin until power-off happens */
-+ avr_uart_send('G'); /* "kick" */
-+ /* NOTREACHED */
-+}
-+
-+static void linkstation_halt(void)
-+{
-+ linkstation_power_off();
-+ /* NOTREACHED */
-+}
-+
-+static void linkstation_show_cpuinfo(struct seq_file *m)
-+{
-+ seq_printf(m, "vendor\t\t: Buffalo Technology\n");
-+ seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n");
-+}
-+
-+static int __init linkstation_probe(void)
-+{
-+ unsigned long root;
-+
-+ root = of_get_flat_dt_root();
-+
-+ if (!of_flat_dt_is_compatible(root, "linkstation"))
-+ return 0;
-+ return 1;
-+}
-+
-+define_machine(linkstation){
-+ .name = "Buffalo Linkstation",
-+ .probe = linkstation_probe,
-+ .setup_arch = linkstation_setup_arch,
-+ .init_IRQ = linkstation_init_IRQ,
-+ .show_cpuinfo = linkstation_show_cpuinfo,
-+ .pcibios_fixup = linkstation_pcibios_fixup,
-+ .get_irq = mpic_get_irq,
-+ .restart = linkstation_restart,
-+ .power_off = linkstation_power_off,
-+ .halt = linkstation_halt,
-+ .calibrate_decr = generic_calibrate_decr,
-+};
-diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c
-new file mode 100644
-index 0000000..b640115
---- /dev/null
-+++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c
-@@ -0,0 +1,131 @@
-+#include <linux/workqueue.h>
-+#include <linux/string.h>
-+#include <linux/delay.h>
-+#include <linux/serial_reg.h>
-+#include <linux/serial_8250.h>
-+#include <asm/io.h>
-+#include <asm/mpc10x.h>
-+#include <asm/ppc_sys.h>
-+#include <asm/prom.h>
-+#include <asm/termbits.h>
-+
-+static void __iomem *avr_addr;
-+static unsigned long avr_clock;
-+
-+static struct work_struct wd_work;
-+
-+static void wd_stop(void *unused)
-+{
-+ const char string[] = "AAAAFFFFJJJJ>>>>VVVV>>>>ZZZZVVVVKKKK";
-+ int i = 0, rescue = 8;
-+ int len = strlen(string);
-+
-+ while (rescue--) {
-+ int j;
-+ char lsr = in_8(avr_addr + UART_LSR);
-+
-+ if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) {
-+ for (j = 0; j < 16 && i < len; j++, i++)
-+ out_8(avr_addr + UART_TX, string[i]);
-+ if (i == len) {
-+ /* Read "OK" back: 4ms for the last "KKKK"
-+ plus a couple bytes back */
-+ msleep(7);
-+ printk("linkstation: disarming the AVR watchdog: ");
-+ while (in_8(avr_addr + UART_LSR) & UART_LSR_DR)
-+ printk("%c", in_8(avr_addr + UART_RX));
-+ break;
-+ }
-+ }
-+ msleep(17);
-+ }
-+ printk("\n");
-+}
-+
-+#define AVR_QUOT(clock) ((clock) + 8 * 9600) / (16 * 9600)
-+
-+void avr_uart_configure(void)
-+{
-+ unsigned char cval = UART_LCR_WLEN8;
-+ unsigned int quot = AVR_QUOT(avr_clock);
-+
-+ if (!avr_addr || !avr_clock)
-+ return;
-+
-+ out_8(avr_addr + UART_LCR, cval); /* initialise UART */
-+ out_8(avr_addr + UART_MCR, 0);
-+ out_8(avr_addr + UART_IER, 0);
-+
-+ cval |= UART_LCR_STOP | UART_LCR_PARITY | UART_LCR_EPAR;
-+
-+ out_8(avr_addr + UART_LCR, cval); /* Set character format */
-+
-+ out_8(avr_addr + UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
-+ out_8(avr_addr + UART_DLL, quot & 0xff); /* LS of divisor */
-+ out_8(avr_addr + UART_DLM, quot >> 8); /* MS of divisor */
-+ out_8(avr_addr + UART_LCR, cval); /* reset DLAB */
-+ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */
-+}
-+
-+void avr_uart_send(const char c)
-+{
-+ if (!avr_addr || !avr_clock)
-+ return;
-+
-+ out_8(avr_addr + UART_TX, c);
-+ out_8(avr_addr + UART_TX, c);
-+ out_8(avr_addr + UART_TX, c);
-+ out_8(avr_addr + UART_TX, c);
-+}
-+
-+static void __init ls_uart_init(void)
-+{
-+ local_irq_disable();
-+
-+#ifndef CONFIG_SERIAL_8250
-+ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */
-+ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO |
-+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); /* clear FIFOs */
-+ out_8(avr_addr + UART_FCR, 0);
-+ out_8(avr_addr + UART_IER, 0);
-+
-+ /* Clear up interrupts */
-+ (void) in_8(avr_addr + UART_LSR);
-+ (void) in_8(avr_addr + UART_RX);
-+ (void) in_8(avr_addr + UART_IIR);
-+ (void) in_8(avr_addr + UART_MSR);
-+#endif
-+ avr_uart_configure();
-+
-+ local_irq_enable();
-+}
-+
-+static int __init ls_uarts_init(void)
-+{
-+ struct device_node *avr;
-+ phys_addr_t phys_addr;
-+ int len;
-+
-+ avr = of_find_node_by_path("/soc10x/serial@80004500");
-+ if (!avr)
-+ return -EINVAL;
-+
-+ avr_clock = *(u32*)get_property(avr, "clock-frequency", &len);
-+ phys_addr = ((u32*)get_property(avr, "reg", &len))[0];
-+
-+ if (!avr_clock || !phys_addr)
-+ return -EINVAL;
-+
-+ avr_addr = ioremap(phys_addr, 32);
-+ if (!avr_addr)
-+ return -EFAULT;
-+
-+ ls_uart_init();
-+
-+ INIT_WORK(&wd_work, wd_stop, NULL);
-+ schedule_work(&wd_work);
-+
-+ return 0;
-+}
-+
-+late_initcall(ls_uarts_init);
-diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
-index f1c7575..25cd8de 100644
---- a/drivers/net/r8169.c
-+++ b/drivers/net/r8169.c
-@@ -1396,41 +1396,6 @@ static void rtl8169_netpoll(struct net_d
- }
- #endif
-
--static void __rtl8169_set_mac_addr(struct net_device *dev, void __iomem *ioaddr)
--{
-- unsigned int i, j;
--
-- RTL_W8(Cfg9346, Cfg9346_Unlock);
-- for (i = 0; i < 2; i++) {
-- __le32 l = 0;
--
-- for (j = 0; j < 4; j++) {
-- l <<= 8;
-- l |= dev->dev_addr[4*i + j];
-- }
-- RTL_W32(MAC0 + 4*i, cpu_to_be32(l));
-- }
-- RTL_W8(Cfg9346, Cfg9346_Lock);
--}
--
--static int rtl8169_set_mac_addr(struct net_device *dev, void *p)
--{
-- struct rtl8169_private *tp = netdev_priv(dev);
-- struct sockaddr *addr = p;
--
-- if (!is_valid_ether_addr(addr->sa_data))
-- return -EINVAL;
--
-- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
--
-- if (netif_running(dev)) {
-- spin_lock_irq(&tp->lock);
-- __rtl8169_set_mac_addr(dev, tp->mmio_addr);
-- spin_unlock_irq(&tp->lock);
-- }
-- return 0;
--}
--
- static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
- void __iomem *ioaddr)
- {
-@@ -1680,7 +1645,6 @@ rtl8169_init_one(struct pci_dev *pdev, c
- dev->stop = rtl8169_close;
- dev->tx_timeout = rtl8169_tx_timeout;
- dev->set_multicast_list = rtl8169_set_rx_mode;
-- dev->set_mac_address = rtl8169_set_mac_addr;
- dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
- dev->irq = pdev->irq;
- dev->base_addr = (unsigned long) ioaddr;
-@@ -1928,8 +1892,6 @@ rtl8169_hw_start(struct net_device *dev)
- /* Enable all known interrupts by setting the interrupt mask. */
- RTL_W16(IntrMask, rtl8169_intr_mask);
-
-- __rtl8169_set_mac_addr(dev, ioaddr);
--
- netif_start_queue(dev);
- }
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 18:11:50 +0000