summaryrefslogtreecommitdiff
path: root/packages/ppp/ppp-gprs/peers/_gprs
diff options
context:
space:
mode:
Diffstat (limited to 'packages/ppp/ppp-gprs/peers/_gprs')
-rw-r--r--packages/ppp/ppp-gprs/peers/_gprs68
1 files changed, 68 insertions, 0 deletions
diff --git a/packages/ppp/ppp-gprs/peers/_gprs b/packages/ppp/ppp-gprs/peers/_gprs
new file mode 100644
index 0000000000..cc316951a0
--- /dev/null
+++ b/packages/ppp/ppp-gprs/peers/_gprs
@@ -0,0 +1,68 @@
+# This is generic pppd config for GPRS connection
+# To connect to specific provider, one
+# more provider-specific config
+# file is required, which will
+# usually just set chat utility params
+# to make connection and call this one.
+# (And in most cases that will be symlink
+# to a file with well-known settings).
+#
+# Usage:
+# pppd <modem_device> call gprs call <country>-<provider>
+# where /etc/ppp/peers/<country>-<provider> ends with line
+# "call _gprs"
+# Example:
+# pppd /dev/rfcomm0 call ua-life
+# Debugging PPP protocol problems:
+# pppd /dev/rfcomm0 call ua-life debug nodetach
+#
+# By default, pppd will go to
+# background once connection is
+# established. 'nodetach' option will
+# prevent this. If you want pppd to
+# even establish connection in
+# background, comment 'updetach' below.
+#
+# To finish connection, use Ctrl+C if
+# 'nodetach' was used, or
+# kill `head -1 /var/run/ppp-gprs.pid`
+# otherwise. If you are sure there is
+# only one pppd connection, you can use
+# killall pppd
+
+##
+## pppd options
+##
+
+# create /var/run/ppp-gprs.pid
+# with pid for this connection
+linkname gprs
+# Connect in foreground, but go
+# to background after that
+updetach
+
+# Treat port as a modem and use
+# reasonable speed
+modem
+crtscts
+115200
+
+# Don't do CCP (compression)
+# negotiation, some providers are
+# rumored to be buggy with this, and
+# most of the rest simply don't support.
+noccp
+# We don't request provider to auth
+# to us
+noauth
+# Don't try to make up our IP address
+noipdefault
+# We want provider to supply us with
+# IP addresses
+ipcp-accept-remote
+ipcp-accept-local
+# Ask provider for DNS and use it
+usepeerdns
+# Route all Internet traffic thru
+# this connection
+defaultroute