summaryrefslogtreecommitdiff
path: root/packages/openturbostation-init
diff options
context:
space:
mode:
Diffstat (limited to 'packages/openturbostation-init')
-rw-r--r--packages/openturbostation-init/.mtn2git_empty0
-rw-r--r--packages/openturbostation-init/files/.mtn2git_empty0
-rw-r--r--packages/openturbostation-init/files/boot/.mtn2git_empty0
-rw-r--r--packages/openturbostation-init/files/conffiles55
-rw-r--r--packages/openturbostation-init/files/functions413
-rw-r--r--packages/openturbostation-init/files/initscripts/.mtn2git_empty0
-rw-r--r--packages/openturbostation-init/files/links.conf6
-rw-r--r--packages/openturbostation-init/files/modulefunctions39
-rw-r--r--packages/openturbostation-init/files/reflash163
-rw-r--r--packages/openturbostation-init/files/sysconf793
-rw-r--r--packages/openturbostation-init/files/turnup861
-rw-r--r--packages/openturbostation-init/openprotium-init_0.10.bb148
12 files changed, 2478 insertions, 0 deletions
diff --git a/packages/openturbostation-init/.mtn2git_empty b/packages/openturbostation-init/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/openturbostation-init/.mtn2git_empty
diff --git a/packages/openturbostation-init/files/.mtn2git_empty b/packages/openturbostation-init/files/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/openturbostation-init/files/.mtn2git_empty
diff --git a/packages/openturbostation-init/files/boot/.mtn2git_empty b/packages/openturbostation-init/files/boot/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/openturbostation-init/files/boot/.mtn2git_empty
diff --git a/packages/openturbostation-init/files/conffiles b/packages/openturbostation-init/files/conffiles
new file mode 100644
index 0000000000..e1408a3227
--- /dev/null
+++ b/packages/openturbostation-init/files/conffiles
@@ -0,0 +1,55 @@
+# conffiles
+# Known SlugOS configuration files. These files are preserved on
+# a flash upgrade. Other configuration files, found from:
+#
+# /usr/lib/ipkg/*.conffiles
+# /etc/*.conf
+#
+# are preserved too with an operation of 'diff' if they have been
+# changed since /etc/.configured was created.
+#
+# Lines starting with # are comments, other lines have
+# two fields:
+#
+# operation file
+#
+# The file must *NOT* have a leading /
+#
+# operation may be:
+# ignore Do not preserve this file
+# preserve Preserve this file unconditionally
+# diff Compare file with the new version, ask if different
+#
+preserve linuxrc
+preserve etc/.configured
+preserve etc/TZ
+diff etc/default/conffiles
+diff etc/default/devpts
+preserve etc/default/rcS
+preserve etc/default/sysconf
+diff etc/default/usbd
+preserve etc/defaultdomain
+preserve etc/dropbear/dropbear_dss_host_key
+preserve etc/dropbear/dropbear_rsa_host_key
+preserve etc/ssh/ssh_host_dsa_key
+preserve etc/ssh/ssh_host_dsa_key.pub
+preserve etc/ssh/ssh_host_rsa_key
+preserve etc/ssh/ssh_host_rsa_key.pub
+preserve etc/fstab
+preserve etc/group
+preserve etc/gshadow
+preserve etc/hostname
+preserve etc/hosts
+preserve etc/localtime
+ignore etc/modules
+ignore etc/modules.conf
+preserve etc/motd
+preserve etc/network/interfaces
+preserve etc/ntp.drift
+preserve etc/passwd
+preserve etc/profile
+preserve etc/resolv.conf
+preserve etc/shadow
+preserve etc/syslog.conf
+preserve etc/timezone
+preserve root/.ssh/authorized_keys
diff --git a/packages/openturbostation-init/files/functions b/packages/openturbostation-init/files/functions
new file mode 100644
index 0000000000..2108288ab5
--- /dev/null
+++ b/packages/openturbostation-init/files/functions
@@ -0,0 +1,413 @@
+#!/bin/sh
+# . this file to load the following utility functions
+#
+# hardware
+# the 'Hardware' string from cpuinfo, or, if not found
+# try a little harder with 'machine'
+hardware(){
+ local hdw
+ hdw=`sed -n 's!^Hardware *: !!p' /proc/cpuinfo`
+ test -n "$hdw" || {
+ hdw=`sed -n 's!^machine *: !!p' /proc/cpuinfo`
+ }
+ echo $hdw
+}
+#
+# machine
+# outputs an identifier of the current machine - i.e. the board
+# slugos is running on.
+machine(){
+ case "$(hardware)" in
+ *Coyote*) echo coyote;;
+ *IXDPG425*) echo ixdpg425;;
+ *WRV54G*) echo wrv54g;;
+ *IXDP425*) echo ixdp425;;
+ *IXDP465*) echo ixdp465;;
+ *IXCDP1100*) echo ixcdp1100*;;
+ *Avila*) echo avila;;
+ *Loft*) echo loft;;
+ *NAS?100d*) echo nas100d;;
+ *NSLU2*) echo nslu2;;
+ *StorCenter*) echo storcenter;;
+ *) echo unknown;;
+ esac
+}
+#
+# single_user_ok
+# if the machine is capable of single user interaction return
+# true, else return false. The result of this function is
+# preempted by setting SULOGIN to 'yes' or 'ok' in /etc/default/rcS
+single_user_ok() {
+ # list known good machines in the 'case'
+ test "$SULOGIN" = yes -o "$SULOGIN" = ok ||
+ case "$(machine)" in
+ ixdp*|avila|loft)
+ test "$SULOGIN" != never;;
+ *) return 1;;
+ esac
+}
+#
+# load_functions "source"
+# load the functions in '/sbin/source' - relies on /sbin/source being
+# a shell script and having support for this function.
+load_functions(){
+ test -n "$1" -a -x "/sbin/$1" && . "/sbin/$1" || {
+ echo "$0: /sbin/$1: script not found" >&2
+ return 1
+ }
+}
+#
+# mtdev "name"
+# return (output) the character device name for flash parition "name"
+# /proc/mtd has the general form:
+# dev: size erasesize name
+# mtd5: 00020000 00020000 "FIS directory"
+# use this rather than hard-wiring the device because the partition
+# table can change - looking in /proc/mtd is more reliable.
+mtdev(){
+ if test $(machine) = storcenter ; then
+ sed -n 's!^mtd\([0-9][0-9]*\):[^"]*"'"$1"'"$!/dev/mtd/\1!p' /proc/mtd
+ else
+ sed -n 's!^\(mtd[0-9][0-9]*\):[^"]*"'"$1"'"$!/dev/\1!p' /proc/mtd
+ fi
+}
+#
+# mtblockdev "name"
+# as mtdev but output the name of the block (not character) device
+mtblockdev(){
+ if test "$(machine)" = storcenter ; then
+ sed -n 's!^mtd\([0-9][0-9]*\):[^"]*"'"$1"'"$!/dev/mtdblock/\1!p' /proc/mtd
+ else
+ sed -n 's!^mtd\([0-9][0-9]*\):[^"]*"'"$1"'"$!/dev/mtdblock\1!p' /proc/mtd
+ fi
+}
+#
+# mtsize "name"
+# the size of the partition as a hexadecimal value (with 0x at the front)
+mtsize(){
+ sed -n 's!^mtd[0-9][0-9]*: \([^ ]*\)[^"]*"'"$1"'"$!0x\1!p' /proc/mtd
+}
+#
+# sysvalmatch "section" "name" 'pattern' "configuration file"
+# sysvalof "section" "name" "configuration file"
+# sysval "section" "name"
+# outputs the value of the SysConf variable 'name' from section 'section',
+# if there are multiple definitions only the last is output
+# NOTE: these functions should only be used internally, add entries to 'config'
+# below if necessary. This is because 'config' does the defaulting.
+sysvalmatch(){
+ sed -n '/^\['"$1"'\]$/,/^\[.*\]$/s/^'"$2"'=\('"$3"'\)$/\1/p' "$4" | sed -n '$p'
+}
+sysvalof(){
+ sysvalmatch "$1" "$2" '.*' "$3"
+}
+sysval(){
+ test -r "$config_root/etc/default/sysconf" &&
+ sysvalof "$1" "$2" "$config_root/etc/default/sysconf"
+}
+#
+# syssection "section"
+# outputs all the values from the given section changed to the format "name value"
+# (i.e. the '=' is dropped).
+syssection(){
+ test -r "$config_root/etc/default/sysconf" &&
+ sed -n '/^\['"$1"'\]$/,/^\[.*\]$/s/^\([^=]*\)=\(.*\)$/\1 \2/p' "$config_root/etc/default/sysconf"
+}
+#
+# config "value"
+# convenience callers for specific values to avoid mis-typing in scripts
+# NOTE: this function does the defaulting, 'sysval' does not!
+# config_root: if set this will override the root where config/sysval
+# looks for /etc/default/sysconf
+config(){
+ local mac
+ mac="$(test -r /proc/net/maclist &&
+ sed -n '/^[0-9A-Za-z][0-9A-Za-z]:[0-9A-Za-z][0-9A-Za-z]:[0-9A-Za-z][0-9A-Za-z]:[0-9A-Za-z][0-9A-Za-z]:[0-9A-Za-z][0-9A-Za-z]:[0-9A-Za-z][0-9A-Za-z]$/p' /proc/net/maclist |
+ sed -n 1p)"
+ #
+ case "$1" in
+ mac) test -n "$mac" && echo "$mac";;
+ host) if test -n "$(sysval network disk_server_name)"
+ then
+ sysval network disk_server_name
+ elif test -n "$(sysval network default_server_name)"
+ then
+ sysval network default_server_name
+ elif test -n "$mac"
+ then
+ echo "$mac" | sed -n 's/^\(..\):\(..\):\(..\):\(..\):\(..\):\(..\)$/slug\1\2\3\4\5\6/p'
+ else
+ # because we want the name to remain constant:
+ echo "turbostation"
+ fi;;
+ domain) sysval network w_d_name;;
+ iface) if test -n "$(sysval network lan_interface)"
+ then
+ sysval network lan_interface
+ else
+ echo eth0
+ fi;;
+ ip) if test -n "$(sysval network ip_addr)"
+ then
+ sysval network ip_addr
+ else
+ echo 192.168.1.16
+ fi;;
+ netmask)sysval network netmask;;
+ gateway)sysval network gateway;;
+ dns) sysval network dns_server1;;
+ dns2) sysval network dns_server2;;
+ dns3) sysval network dns_server3;;
+ boot) if test -n "$(sysval network bootproto)"
+ then
+ sysval network bootproto
+ else
+ echo dhcp
+ fi;;
+ valid) test -r "$config_root/etc/default/sysconf" -a -n "$mac";;
+ *) return 1;;
+ esac
+}
+#
+# checkif "iface"
+# Validate an interface name by making sure that it exists
+# in /proc/net/dev (and is not lo). The listing outputs the
+# interface followed by a :, the check function looks for
+# something of the form '$1[a-zA-Z0-9]*:' and outputs the
+# part preceding the ':'
+checkif(){
+ sed -n '/^[ ]*lo:/d;s/^[ ]*\('"$1"'[a-zA-Z0-9]*\):.*$/\1/p;tE;d;:E;q' /proc/net/dev
+}
+#
+# checkmount "mountpoint"
+# tests an already mounted mountpoint to see whether to attempt to
+# boot with this as root. Returns success if it appears ok.
+checkmount(){
+ # basic test for init (the kernel will try to load this)
+ # but require a shell in bin/sh too
+ test \( -d "$1/mnt" \) -a \
+ \( -x "$1/bin/sh" -o -h "$1/bin/sh" \) -a \
+ \( -x "$1/usr/sbin/chroot" -o -h "$1/usr/sbin/chroot" -o \
+ -x "$1/sbin/chroot" -o -h "$1/sbin/chroot" \) -a \
+ \( -x "$1/sbin/init" -o -h "$1/sbin/init" -o \
+ -x "$1/etc/init" -o -h "$1/etc/init" -o \
+ -x "$1/bin/init" -o -h "$1/bin/init" \)
+}
+#
+# swivel "new root" "old root"
+# NOTE: the arguments must be paths relative to /, bad things
+# will happen if the arguments themselves start with /
+# Pivot to a new root. This does all the fancy pivot_root stuff
+# including closing streams and does a umount /proc - it doesn't
+# matter if this fails (failure codes are ignored), but if /proc
+# was mounted it must be restored by the caller on return.
+# Normally this function never returns!
+# On return 0,1,2 are connected to /dev/console - this may not
+# have been true before!
+swivel(){
+ cd "$1"
+ exec <&- >&- 2>&-
+ # This is just-in-case the called mounted /proc and was
+ # unable to close it because of the streams
+ umount /proc 2>/dev/null
+ if pivot_root . "$2"
+ then
+ # everything must move out of the old root, this process
+ # is $2/bin/sh so it must die, IO is redirected
+ # just in case - typically it will be to a device so it
+ # won't hold the old root open.
+ # the exec here is the first point at which the old root
+ # is unused - before the exec regardless of the close of
+ # 0,1,2 above ash still has *this* shell script open!
+ # (it's on fd 10).
+ # init closes all file descriptors, there's no point
+ # supplying it with fds.
+ # NOTE: this used to use $2/usr/sbin/chroot, however on
+ # linux / is already . when the command is executed
+ # therefore it is essential to use the local (new root)
+ # chroot to ensure it gets the correct shared libraries.
+ if test -x usr/sbin/chroot -o -h usr/sbin/chroot
+ then
+ chroot=usr/sbin/chroot
+ elif test -x sbin/chroot -o -h sbin/chroot
+ then
+ chroot=sbin/chroot
+ else
+ chroot=chroot
+ fi
+ #
+ exec "$chroot" . bin/sh -c "\
+ test -x sbin/init && exec sbin/init
+ test -x etc/init && exec etc/init
+ test -x bin/init && exec bin/init
+ mount -t sysfs sysfs /mnt
+ umount /mnt
+ sync;sync;sync
+ exit 1"
+ fi
+ #
+ # recovery - must restore the old root
+ cd "$2"
+ sbin/pivot_root . "$1"
+ # cd is back to $1 - either pivot_root doesn't change it and the
+ # chroot above was not executed, or pivot_root does change it and
+ # has just changed it back!
+ exec <>/dev/console >&0 2>&0
+}
+#
+# ifup "interface"
+# bring that interface up with the configured ip and other
+# information
+ifup(){
+ local ip hostname router subnet iface HOSTNAME NETMASK BROADCAST
+
+ iface="$1"
+ ip="$(config ip)"
+ hostname="$(config host)"
+ router="$(config gateway)"
+ broadcast=
+
+ if test -n "$ip"
+ then
+ # only if an ip was specified
+ subnet="$(config netmask)"
+ else
+ ip=192.168.1.77
+ fi
+
+ # First try udhcpc - note that the /boot/udhcpc.script
+ # simply records the values returned and the udhcpc
+ # is not left running so this will only work for
+ # the lease length time!
+ ifconfig "$iface" up
+ if test "$(config boot)" != static
+ then
+ test -n "$hostname" && HOSTNAME="-H $hostname"
+ # The script writes the required shell variable assignments
+ # to file descriptor 9
+ eval $(udhcpc -i "$iface" -n -q -r "$ip" $HOSTNAME -s /boot/udhcpc.script 9>&1 >/dev/null)
+ fi
+
+ test -n "$broadcast" && BROADCAST="broadcast $broadcast"
+ test -n "$subnet" && NETMASK="netmask $subnet"
+
+ if ifconfig "$iface" "$ip" $NETMASK $BROADCAST
+ then
+ for route in $router
+ do
+ route add default gw "$route" dev "$iface"
+ done
+ return 0
+ else
+ ifconfig "$iface" down
+ return 1
+ fi
+}
+#
+# ifdown "interface"
+# take the interface down
+ifdown(){
+ ifconfig "$1" down
+}
+#
+# mountflash "flash device" "flash root directory" {mount options}
+# Finds and mounts the flash file system on the given directory
+mountflash(){
+ local ffsdev ffsdir
+
+ ffsdev="$1"
+ test -n "$ffsdev" -a -b "$ffsdev" || {
+ echo "$0: unable to find flash file system to copy ($ffsdev)" >&2
+ return 1
+ }
+ shift
+
+ ffsdir="$1"
+ test -n "$ffsdir" -a -d "$ffsdir" || {
+ echo "$0: mountflash $ffsdir: not a directory (internal error)" >&2
+ return 1
+ }
+ shift
+
+ mount -t jffs2 "$@" "$ffsdev" "$ffsdir" || {
+ echo "$0: $ffsdev: unable to mount flash file system on $ffsdir" >&2
+ return 1
+ }
+ return 0
+}
+#
+# umountflash [-r] "flash device"
+# unmount any instance of the given flash device, if -r is specified a mount on
+# root is an error, otherwise a mount on root is ignored (and remains).
+umountflash(){
+ local rootok ffsno ffsdev
+ rootok=1
+ case "$1" in
+ -r) rootok=
+ shift;;
+ esac
+ #
+ # The argument is ffsdev
+ ffsdev="$1"
+ ffsno="$(devio "<<$ffsdev" prd)"
+ test -n "$ffsno" -a "$ffsno" -ge 0 || {
+ echo "$0: $ffsdev: device number $ffsno is not valid, cannot continue." >&2
+ return 1
+ }
+ #
+ # Make sure that Flashdisk isn't mounted on /
+ if test -z "$rootok" -a "$(devio "<</etc/init.d/sysconfsetup" prd)" -eq "$ffsno"
+ then
+ echo "$0: $ffsdev is mounted on /, use turnup ram" >&2
+ return 1
+ fi
+ #
+ # The function is currently always used interactively, so output
+ echo "$0: umounting any existing mount of $ffsdev" >&2
+ #
+ # check each mount point, do this last first because otherwise nested
+ # mounts of ffsdev cannot be umounted.
+ ffs_umount() {
+ local device mp type options stuff
+
+ read device mp type options stuff
+ test -z "$device" && return 0
+
+ # handle following entries first
+ ffs_umount || return 1
+
+ # handle this entry, since this is currently only used for unmounting
+ # the flash root partition we know a file which must exist...
+ case "$mp/$type" in
+ //jffs2);; # skip /
+ */jffs2)test "$(devio "<<$mp/etc/init.d/sysconfsetup" prd 2>/dev/null)" -ne "$ffsno" ||
+ umount "$mp" || {
+ echo "$0: $mp: unable to umount $ffsdev" >&2
+ return 1
+ };;
+ esac
+
+ return 0
+ }
+ #
+ ffs_umount </proc/mounts || {
+ echo "$0: umount $ffsdev from all mount points then re-run $0" >&2
+ return 1
+ }
+
+ return 0
+}
+
+#
+# uuid_by_partition
+# output a list of partitions and their UUIDs
+uuid_by_partition() {
+ blkid -c /dev/null -s UUID | sed -n 's/^\([^:]*\): .*UUID="\([^"]*\)".*$/\1 \2/p'
+}
+
+#
+# partition_of uuid
+# return the partition corresponding to the UUID
+partition_of() {
+ sed -n 's/^\([^ ]*\) '"$1"'$/\1/p'
+}
diff --git a/packages/openturbostation-init/files/initscripts/.mtn2git_empty b/packages/openturbostation-init/files/initscripts/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/openturbostation-init/files/initscripts/.mtn2git_empty
diff --git a/packages/openturbostation-init/files/links.conf b/packages/openturbostation-init/files/links.conf
new file mode 100644
index 0000000000..fdd1f3ce23
--- /dev/null
+++ b/packages/openturbostation-init/files/links.conf
@@ -0,0 +1,6 @@
+# This file does not exist. Please do not ask the debian maintainer about it.
+# You may use it to do strange and wonderful things, at your risk.
+
+# The new RTC class does not create the /dev/rtc symlink, and udev rules don't get run for built-in modules.
+# So it looks like we have to do this here for the moment, until someone comes up with a better idea ...
+L rtc rtc0
diff --git a/packages/openturbostation-init/files/modulefunctions b/packages/openturbostation-init/files/modulefunctions
new file mode 100644
index 0000000000..430e376ad8
--- /dev/null
+++ b/packages/openturbostation-init/files/modulefunctions
@@ -0,0 +1,39 @@
+#!/bin/sh
+# "." this file, then call the appropriate routines to load modules
+# you might need. This is run from /etc/rcS.d/S21loadmodules.sh
+# at boot time. Possible examples are commented out, none of which
+# are needed on openprotium since they are already in the kernel.
+
+. /etc/default/functions
+
+
+loaddiskmods(){
+ :
+# modprobe scsi_mod
+# modprobe sd_mod
+# modprobe usbcore
+# case "$(machine)" in
+# nslu2)
+# modprobe ehci-hcd
+# modprobe ohci-hcd
+# ;;
+# esac
+# modprobe usb-storage
+}
+
+loadnetmods(){
+ :
+# modprobe af_packet
+# case "$(machine)" in
+# ixdp425|nslu2|nas100d)
+# modprobe ixp4xx_mac
+# ;;
+# esac
+}
+
+loadmiscmods(){
+ :
+# modprobe ixp4xx_rng
+# modprobe i2c_dev
+}
+
diff --git a/packages/openturbostation-init/files/reflash b/packages/openturbostation-init/files/reflash
new file mode 100644
index 0000000000..f2947822f6
--- /dev/null
+++ b/packages/openturbostation-init/files/reflash
@@ -0,0 +1,163 @@
+#!/bin/sh
+#
+# Open Protium Reflash. This script will take a firmware image consisting
+# of a compressed linux kernel image, concatentated with a jffs2 root
+# filesystem image. The kernel MTD device is discovered by locating
+# the MTD partition with the tag "kernel" and the filesystem MTD device
+# is dicovered by locating the MTD partition with the tag "filesystem."
+# There is no TOC inside the firmware images so there is no direct way
+# to validate that the sizes of the parts in the firmware match the
+# existing MTD partitions. So there could be a mismatch. However, a
+# a mismatch size will be detect as this script mounts the newly laid
+# done filesystem, a mismatch guarantees this to fail. That being said
+# the script does validate the total size to prevent overwriting
+# uboot. Furthermore the script makes sure the fsdev is not in use and
+# that the various images are block aligned.
+
+flimg=$1
+if [ -z "$flimg" ]; then
+ echo "Usage: reflash <image file>"
+ exit 1
+fi
+
+if [ \! -f $flimg -o \! -r $flimg ]; then
+ #
+ # not a file or not readable
+ #
+ echo "error: Image file [$flimg] not available"
+ exit 1
+fi
+
+dmesg | grep StorCenter >/dev/null 2>&1
+if [ $? -ne 0 ]; then
+ exit 0
+fi
+
+blksize=512
+mtd=/proc/mtd
+mtab=/proc/mounts
+mntdir=/tmp/fs.$$
+
+ktag=kernel
+fstag=filesystem
+
+kdev=` grep $ktag $mtd | awk -F: '{print $1}' | sed -e 's?mtd?/dev/mtdblock/?g'`
+fsdev=`grep $fstag $mtd | awk -F: '{print $1}' | sed -e 's?mtd?/dev/mtdblock/?g'`
+
+flsize=`ls -l $flimg | awk '{print $5}'`
+ksize=`grep $ktag $mtd | awk '{print "0x" $2}'`
+fssize=`grep $fstag $mtd | awk '{print "0x" $2}'`
+
+#
+# Size comes out of dc in exp notation and test wont accept a hex number
+# so dumo it in hex then use awk to convert to decimal
+#
+size=0x`dc 16 o $ksize $fssize + p`
+size=`echo $size | awk '{printf ("%d",$1)}'`
+
+#
+# Make sure we are block aligned
+#
+kblks=`dc $ksize $blksize / p`
+r=`dc $ksize $blksize % p`
+if [ $r -ne 0 ]; then
+ echo "error: Kernel partition is not block aligned."
+ exit 1
+fi
+
+#
+# Make sure we are block aligned
+#
+fsblks=`dc $fssize $blksize / p`
+r=`dc $fssize $blksize % p`
+if [ $r -ne 0 ]; then
+ echo "error: Filesystem partition is not block aligned."
+ exit 1
+fi
+
+#
+# Check to see that we have enough room
+#
+if [ $flsize -gt $size ]; then
+ echo "error: Image size is bigger then available space."
+ exit 1
+fi
+
+#
+# Is fsdev mounted?
+#
+grep $fsdev $mtab > /dev/null 2>&1
+if [ $? -eq 0 ]; then
+ echo "error: $fsdev mounted"
+ exit 1
+fi
+
+#
+# If root is a jffs2 then close enough, im out
+#
+grep jffs2 $mtab > /dev/null 2>&1
+if [ $? -eq 0 ]; then
+ echo "error: $fsdev may be mounted"
+ exit 1
+fi
+
+
+#
+# Mount fsdev and save fsdev/linuxrc
+#
+mkdir $mntdir /tmp/$$
+mount -t jffs2 $fsdev $mntdir
+if [ $? -ne 0 ]; then
+ echo "error: Unable to mount $fsdev"
+ exit 1
+fi
+echo "Preserving /linuxrc in /tmp/$$"
+cp $mntdir/linuxrc* /tmp/$$
+umount $mntdir
+
+echo "Image:"
+echo " Name : $flimg"
+echo " Length: $flsize"
+echo
+echo "Kernel:"
+echo " Device: $kdev"
+echo " Length: $ksize"
+echo " Blocks: $kblks"
+echo
+echo "Filesystem:"
+echo " Device: $fsdev"
+echo " Length: $fssize"
+echo " Blocks: $fsblks"
+echo
+echo 'Ready to flash, Continue? (yes/no)'
+read continue
+if [ "z$continue" != "zyes" ]; then
+ rm -rf $mntdir /tmp/$$
+ exit 0
+fi
+
+#
+# Lets do the flash
+#
+echo Preserving existing flash in: $flimg.sav.$$
+dd of=$flimg.sav.$$ if=$kdev bs=$blksize count=$kblks
+dd of=$flimg.sav.$$ if=$fsdev bs=$blksize count=$fsblks seek=$kblks
+
+echo Flashing new firmware....
+dd if=$flimg of=$kdev bs=$blksize count=$kblks
+dd if=$flimg of=$fsdev bs=$blksize count=$fsblks skip=$kblks
+sync
+sleep 5
+
+#
+# Mount fsdev and restore fsdev/linuxrc
+#
+mount -t jffs2 $fsdev $mntdir
+if [ $? -ne 0 ]; then
+ echo "error: Unable to re-mount $fsdev"
+ exit 1
+fi
+echo "Restoring /linuxrc"
+cp /tmp/$$/linuxrc* $mntdir
+umount $mntdir
+rm -rf $mntdir /tmp/$$
diff --git a/packages/openturbostation-init/files/sysconf b/packages/openturbostation-init/files/sysconf
new file mode 100644
index 0000000000..8866c076b8
--- /dev/null
+++ b/packages/openturbostation-init/files/sysconf
@@ -0,0 +1,793 @@
+#!/bin/sh
+# sysconf
+#
+# utility to manipulate system configuration information help
+# in a RedBoot SysConf partition
+#
+# load the utility functions (unless this is being called just
+# to load these functions!)
+test "$1" != sysconf && . /etc/default/functions
+
+# NSLU2 flash layout is non-standard.
+case "$(machine)" in
+nslu2)
+ kpart="Kernel"
+ syspart="SysConf"
+ ffspart="Flashdisk";;
+*)
+ kpart="kernel"
+ syspart="sysconfig"
+ ffspart="filesystem";;
+esac
+#
+# sysconf_valid
+# return true if the SysConf partition exists and seems to be
+# potentially valid (it starts with a reasonable length).
+sysconf_valid(){
+ local sysdev
+ sysdev="$(mtblockdev $syspart)"
+ test -n "$sysdev" -a -b "$sysdev" &&
+ devio "<<$sysdev" '!! b.10>s32768<&!'
+}
+
+#
+# sysconf_read [prefix]
+# read the $syspart partition (if present) writing the result into
+# /etc/default/sysconf, if the result is empty it will be removed.
+sysconf_read(){
+ local sysdev sedcmd mac config_root
+ config_root="$1"
+ rm -f /tmp/sysconf.new
+ sysdev="$(mtblockdev $syspart)"
+ if sysconf_valid
+ then
+ # Read the defined part of $syspart into /etc/default/sysconf.
+ # $syspart has lines of two forms:
+ #
+ # [section]
+ # name=value
+ #
+ # In practice $syspart also contains other stuff, use the command:
+ #
+ # devio '<</dev/mtd1;cpb'
+ #
+ # to examine the current settings. The badly formatted stuff
+ # is removed (to be exact, the sed script selects only lines
+ # which match one of the two above). The lan interface, which
+ # on NSLU2 defaults to ixp0, is changed to the correct value for
+ # slugos, eth0. The bootproto, which LinkSys sets to static in
+ # manufacturing, is reset to dhcp if the IP is still the
+ # original (192.168.1.77)
+ sedcmd='/^\[[^][]*\]$/p;'
+ # only do the ip_addr and lan_interface fixups on NSLU2
+ if test "$(machine)" = nslu2
+ then
+ sedcmd="$sedcmd"'
+ s/^lan_interface=ixp0$/lan_interface=eth0/;
+ /^ip_addr=192\.168\.1\.77$/,/^bootproto/s/^bootproto=static$/bootproto=dhcp/;'
+ fi
+ # always fix up the hardware addr if it is present
+ mac="$(config mac)"
+ if test -n "$mac"
+ then
+ sedcmd="$sedcmd"'
+ s/^hw_addr=.*$/hw_addr='"$mac"'/;'
+ fi
+ # and only print lines of the correct form
+ sedcmd="$sedcmd"'
+ /^[-a-zA-Z0-9_][-a-zA-Z0-9_]*=/p'
+
+ devio "<<$sysdev" cpb fb1,10 | sed -n "$sedcmd" >/tmp/sysconf.new
+ fi
+ #
+ # test the result - sysconf must be non-empty
+ if test -s /tmp/sysconf.new
+ then
+ mv /tmp/sysconf.new "$config_root/etc/default/sysconf"
+ else
+ rm -f /tmp/sysconf.new
+ return 1
+ fi
+}
+
+#
+# sysconf_default [prefix]
+# Provde a default /etc/default/sysconf when there is no $syspart partition,
+# or when it is invalid, this function will read from an existing sysconf,
+# copying the values into the new one.
+# sysconf_line tag config-tag
+# write an appropriate line if the config value is non-empty
+sysconf_line(){
+ config "$2" | {
+ local value
+ read value
+ test -n "$value" && echo "$1"="$value"
+ }
+}
+#
+sysconf_default(){
+ local config_root
+ config_root="$1"
+ { echo '[network]'
+ sysconf_line hw_addr mac
+ sysconf_line disk_server_name host
+ sysconf_line w_d_name domain
+ sysconf_line lan_interface iface
+ sysconf_line ip_addr ip
+ sysconf_line netmask netmask
+ sysconf_line gateway gateway
+ sysconf_line dns_server1 dns
+ sysconf_line dns_server2 dns2
+ sysconf_line dns_server3 dns3
+ sysconf_line bootproto boot
+ } >/tmp/sysconf.new
+ mv /tmp/sysconf.new "$config_root/etc/default/sysconf"
+}
+
+#
+# sysconf_reload [prefix]
+# read the values from /etc/default/sysconf and use these values to set
+# up the following system files:
+#
+# /etc/hostname
+# /etc/defaultdomain
+# /etc/resolv.conf
+# /etc/network/interfaces
+# /etc/motd
+#
+sysconf_reload(){
+ local config_root host domain iface boot ip netmask gateway ifname iftype
+ config_root="$1"
+ host="$(config host)"
+ test -n "$host" && echo "$host" >"$config_root/etc/hostname"
+ domain="$(config domain)"
+ test -n "$domain" && echo "$domain" >"$config_root/etc/defaultdomain"
+ #
+ # The DNS server information gives up to three nameservers,
+ # but this currently only binds in the first.
+ {
+ test -n "$domain" && echo "search $domain"
+ test -n "$(config dns)" && echo "nameserver $(config dns)"
+ test -n "$(config dns2)" && echo "nameserver $(config dns2)"
+ test -n "$(config dns3)" && echo "nameserver $(config dns3)"
+ } >"$config_root/etc/resolv.conf"
+ #
+ # Ethernet information. This goes into /etc/network/interfaces,
+ # however this is only used for static setup (and this is not
+ # the default). With dhcp the slugos udhcp script,
+ # /etc/udhcpc.d/50default, loads the values from sysconf.
+ iface="$(config iface)"
+ boot="$(config boot)"
+ # Only dhcp and static are supported at present - bootp
+ # support requires installation of appropriate packages
+ # dhcp is the fail-safe
+ case "$boot" in
+ dhcp|static) ;;
+ *) boot=dhcp;;
+ esac
+ #
+ ip="$(config ip)"
+ netmask="$(config netmask)"
+ gateway="$(config gateway)"
+ {
+ echo "# /etc/network/interfaces"
+ echo "# configuration file for ifup(8), ifdown(8)"
+ echo "#"
+ echo "# The loopback interface"
+ echo "auto lo"
+ echo "iface lo inet loopback"
+ echo "#"
+ echo "# The interface used by default during boot"
+ echo "auto $iface"
+ echo "# Automatically generated from /etc/default/sysconf"
+ echo "# address, netmask and gateway are ignored for 'dhcp'"
+ echo "# but required for 'static'"
+ echo "iface $iface inet $boot"
+ # The following are ignored for DHCP but are harmless
+ test -n "$ip" && echo " address $ip"
+ test -n "$netmask" && echo " netmask $netmask"
+ test -n "$gateway" && echo " gateway $gateway"
+ #
+ # Now read all the other ARPHRD_ETHER (type=1) interfaces
+ # and add an entry for each.
+ for ifname in $(test -d /sys/class/net && ls /sys/class/net)
+ do
+ if test -r "/sys/class/net/$ifname/type" -a "$ifname" != "$iface"
+ then
+ read iftype <"/sys/class/net/$ifname/type"
+ case "$iftype" in
+ 1) echo "#"
+ echo "# /sys/class/net/$ifname:"
+ echo "auto $ifname"
+ echo "iface $ifname inet dhcp";;
+ esac
+ fi
+ done
+ } >"$config_root/etc/network/interfaces"
+ #
+ # Finally rewrite /etc/motd
+ { echo "Host name: $host"
+ echo "Domain name: $domain"
+ echo "Host MAC: $(config mac)"
+ echo "Network boot method: $boot"
+ case "$boot" in
+ static) echo "Host IP address: $ip";;
+ esac
+ echo "Use 'turnup init' to reset the configuration"
+ echo "Use 'turnup preserve' to save the configuration permanently"
+ echo "Use 'turnup restore' to restore a previously saved configuration"
+ echo "Use 'turnup disk|nfs -i <device> options to initialise a non-flash root"
+ echo "Use 'turnup help' for more information"
+ } >"$config_root/etc/motd"
+}
+
+#
+# sysconf_save_conffiles <flash-directory> <dest> <list>
+# preserve the configuration files in a directory or in a CPIO archive
+# (which is *not* compressed). If <dest> is a directory the files are
+# copied, otherwise a CPIO archive is made with that name. <list> is
+# the listing file giving the preserved files and the processing option.
+sysconf_save_conffiles(){
+ local ffsdir dest list file
+ ffsdir="$1"
+ saved="$2"
+ list="$3"
+ test -n "$ffsdir" -a -r "$ffsdir/etc/default/conffiles" -a -n "$saved" -a -n "$list" || {
+ echo "sysconf_save_conffiles: invalid arguments: '$*'" >&2
+ echo " usage sysconf_save_conffiles <flash-directory> <dest> <list>" >&2
+ return 1
+ }
+ #
+ ( cd "$ffsdir"
+ find etc/*.conf $(sed 's!^/!!' usr/lib/ipkg/info/*.conffiles) ! -type d -newer etc/.configured -print |
+ sed 's/^/diff /'
+ exec sed 's/#.*$//;/^[ ]*$/d' etc/default/conffiles
+ ) | sed 's!^/*!!' |
+ awk '{ op=$1; $1=""; file[$0]=op }
+ END{ for (f in file) if (file[f] != "ignore") print file[f] f }' |
+ while read op file
+ do
+ if test -e "$ffsdir/$file"
+ then
+ echo "$op $file" >&3
+ echo "$file"
+ fi
+ done 3>"$list" | (
+ cd "$ffsdir"
+ if test -d "$saved"
+ then
+ exec cpio -p -d -m -u "$saved"
+ else
+ exec cpio -o -H crc >"$saved"
+ fi
+ )
+}
+
+#
+# sysconf_verify file
+# this is called with the name of a 'diff' file which is, indeed,
+# different and with all the std streams connected to the tty. It
+# returns a status code to say whether (0) or not (1) to copy the
+# file over.
+#
+# globals: the following must be defined in the calling context!
+# saved: the directory containing the unpacked saved files
+# ffsdir: the flash directory to which the files are being restored (/)
+#
+sysconf_verify_help() {
+ echo "Please specify how to handle this file or link, the options are as follows,"
+ echo "two character abbreviations may be used:"
+ echo
+ echo " keep: retain the old file, overwrite the new flash image file"
+ echo " upgrade: retain the new file, the old (saved) file is not used"
+ echo " diff: display the differences between the old and the new using diff -u"
+ echo " shell: temporarily start an interactive shell (sh -i), exit to continue"
+ echo " skip: ignore this file for the moment. The file is left in the directory"
+ echo " $saved and many be handled after this script has completed"
+}
+#
+sysconf_verify() {
+ local command file
+
+ # return 1 here causes the file not to be overwritten,
+ # control should never get here!
+ test -n "$sysconf_noninteractive" && {
+ echo "$0: $*: changed file cannot be handled non-interactively" >&2
+ return 1
+ }
+
+ file="$1"
+ echo "$0: $file: configuration file changed."
+ sysconf_verify_help "$file"
+ while :
+ do
+ echo -n "option: "
+ read command
+ case "$command" in
+ ke*) return 0;;
+ up*) rm "$saved/$file"
+ return 1;;
+ di*) echo "DIFF OLD($saved) NEW($ffsdir)"
+ diff -u "$saved/$file" "$ffsdir/$file";;
+ sh*) PS1="$file: " sh -i;;
+ sk*) return 1;;
+ *) sysconf_verify_help "$file";;
+ esac
+ done
+}
+# the same, but for a link
+sysconf_verify_link() {
+ local command link
+
+ # return 1 here causes the file not to be overwritten,
+ # control should never get here!
+ test -n "$sysconf_noninteractive" && {
+ echo "$0: $*: changed link cannot be handled non-interactively" >&2
+ return 1
+ }
+
+ link="$1"
+ echo "reflash: $link: configuration link changed."
+ sysconf_verify_help "$link"
+ while :
+ do
+ echo -n "option: "
+ read command
+ case "$command" in
+ ke*) return 0;;
+ up*) rm "$saved/$link"
+ return 1;;
+ di*) echo "DIFF:"
+ echo "OLD($saved): $link -> $(readlink "$saved/$link")"
+ echo "NEW($ffsdir): $link -> $(readlink "$ffsdir/$link")";;
+ sh*) PS1="$link: " sh -i;;
+ sk*) return 1;;
+ *) sysconf_verify_help "$link";;
+ esac
+ done
+}
+
+#
+# sysconf_restore_conffiles <flash-directory> <source-dir> <restore>
+# restore the configuration files from a directory. 'source-dir'
+# If <source> is a directory of files from sysconf_save_conffiles. The
+# list of files restored is written to the third argument (restore),
+# but is not required (/dev/null would be ok).
+#
+# the list of files to restore is read from stdin, along with the
+# processing option for each file (the format is as produced by
+# sysconf_save_conffiles in the 'list' output).
+sysconf_restore_conffiles(){
+ local ffsdir saved restore
+ # these are the globals used by the above function
+ ffsdir="$1"
+ saved="$2"
+ restore="$3"
+ test -n "$ffsdir" -a -r "$ffsdir/etc/default/conffiles" -a -d "$saved" -a -n "$restore" || {
+ echo "restore_conffiles: invalid arguments: '$*'" >&2
+ echo " usage sysconf_restore_conffiles <flash-directory> <source-dir> <list>" >&2
+ return 1
+ }
+ #
+ # read the list and process each given file
+ while read op file
+ do
+ # handle .configured specially (to preserve the original datestamp)
+ if test "$file" = "etc/.configured"
+ then
+ # this should definately not fail because of the test above!
+ if cp -a "$saved/$file" "$ffsdir/$file"
+ then
+ echo "$file" >&3
+ else
+ echo "sysconf_restore_conffiles: $file: timestamp copy failed (ignored)" >&2
+ fi
+ elif test -h "$saved/file" -o -h "$ffsdir/$file"
+ then
+ # new or old symbolic link
+ if test -h "$saved/$file" -a -h "$ffsdir/$file" &&
+ test "$(readlink "$saved/$file")" = "$(readlink "$ffsdir/$file")"
+ then
+ # no change
+ echo "$file" >&3
+ else
+ # assume a change regardless
+ case "$op" in
+ preserve)
+ echo "$file"
+ echo "$file" >&3;;
+ diff) # need user input
+ if sysconf_verify_link "$file" <>/dev/tty >&0 2>&0
+ then
+ echo "$file"
+ echo "$file" >&3
+ fi;;
+ esac
+ fi
+ else
+ # only overwrite if necessary
+ if test -e "$ffsdir/$file" && cmp -s "$saved/$file" "$ffsdir/$file"
+ then
+ # do not overwrite
+ echo "$file" >&3
+ elif test ! -e "$ffsdir/$file"
+ then
+ # always preserve
+ echo "$file"
+ echo "$file" >&3
+ else
+ case "$op" in
+ preserve)
+ echo "$file"
+ echo "$file" >&3;;
+ diff) # the files are different, get user input
+ if sysconf_verify "$file" <>/dev/tty >&0 2>&0
+ then
+ echo "$file"
+ echo "$file" >&3
+ fi;;
+ esac
+ fi
+ fi
+ done 3>"$restore" | (cd "$saved"; exec cpio -p -d -u "$ffsdir")
+}
+
+#
+# sysconf_test_restore <flash-directory> <source-dir>
+# return true only if the restore does not need to do an interactive
+# compare
+sysconf_test_restore(){
+ local ffsdir saved
+ # these are the globals used by the above function
+ ffsdir="$1"
+ saved="$2"
+ # this is an error case, but return 0 so that the error is
+ # detected later
+ test -n "$ffsdir" -a -r "$ffsdir/etc/default/conffiles" -a -d "$saved" ||
+ return 0
+ #
+ # read the list and check each diff file (this is just a copy of the
+ # logic above with all the work removed!)
+ while read op file
+ do
+ # handle .configured specially (to preserve the original datestamp)
+ if test "$op" != diff
+ then
+ : # no diff required
+ elif test "$file" = "etc/.configured"
+ then
+ : # special handling
+ elif test -h "$saved/file" -o -h "$ffsdir/$file"
+ then
+ # new or old symbolic link
+ if test -h "$saved/$file" -a -h "$ffsdir/$file" &&
+ test "$(readlink "$saved/$file")" = "$(readlink "$ffsdir/$file")"
+ then
+ : # no change
+ else
+ # assume a change regardless
+ return 1
+ fi
+ else
+ # only overwrite if necessary
+ if test -e "$ffsdir/$file" && cmp -s "$saved/$file" "$ffsdir/$file"
+ then
+ : # do not overwrite
+ elif test ! -e "$ffsdir/$file"
+ then
+ : # always preserve
+ else
+ # a change
+ return 1
+ fi
+ fi
+ done
+
+ return 0
+}
+
+#
+# sysconf_save
+# save the system configuration to $syspart - $syspart must exist and
+# there must be a writeable device for it.
+sysconf_save(){
+ local sysdev ffsdev ffsdir saved list size status
+ ffsdev="$(mtblockdev $ffspart)"
+ sysdev="$(mtblockdev $syspart)"
+ status=1
+ if test -n "$sysdev" -a -b "$sysdev" -a -n "$ffsdev" -a -b "$ffsdev"
+ then
+ # this will succeed silently if the flash device is on /
+ umountflash "$ffsdev" || exit 1
+ #
+ # Everything is umounted, now remount on a temporary directory.
+ ffsdir="/tmp/flashdisk.$$"
+ mkdir "$ffsdir" || {
+ echo "$0: $ffsdir: failed to create temporary directory" >&2
+ exit 1
+ }
+ #
+ mountflash "$ffsdev" "$ffsdir" -o ro || {
+ rmdir "$ffsdir"
+ exit 1
+ }
+ # need temporary files for the cpio output and the listing
+ saved=/tmp/cpio.$$
+ list=/tmp/preserve.$$
+ rm -rf "$saved" "$list"
+ sysconf_save_conffiles "$ffsdir" "$saved" "$list" || {
+ echo "$0: $saved: archive of saved configuration files failed" >&2
+ rm -rf "$saved"
+ rm "$list"
+ umount "$ffsdir" && rmdir "$ffsdir" ||
+ echo "$0: $ffsdir: temporary directory cleanup failed" >&2
+ return 1
+ }
+ # ignore the error in this case:
+ umount "$ffsdir" && rmdir "$ffsdir" ||
+ echo "$0: $ffsdir: temporary directory cleanup failed" >&2
+ #
+ # we now have:
+ # /etc/default/sysconf the basic config
+ # /tmp/preserve.$$ the list of saved files
+ # /tmp/cpio.$$ the CPIO archive of those files
+ #
+ # make one big file with the sysconf data followed by the
+ # compressed archive in /tmp/sysconf.$$
+ { { cat /etc/default/sysconf
+ echo '[preserve]'
+ } | sed -n '1,/^\[preserve\]^/p'
+ while read op file
+ do
+ echo "$op"="$file"
+ done <"$list"
+ } >/tmp/sysconf.$$
+ size="$(devio "<</tmp/sysconf.$$" 'pr$')"
+ gzip -9 <"$saved" >>/tmp/sysconf.$$
+ #
+ # more cleanup, then try to write the new sysconf to $syspart
+ # the format is a 4 byte big-endian length then the text data
+ # if the data won't fit exit with error code 7
+ rm "$saved" "$list"
+ devio -p "<</tmp/sysconf.$$" ">>$sysdev" '
+ $( $4+ # >
+ !! 7
+ $) 0
+ wb '"$size"',4
+ cp $'
+ case $? in
+ 0) echo " done" >&2
+ status=0;;
+ 1) echo " failed" >&2
+ echo " $syspart could not be written (no changes made)" >&2;;
+ 3) echo " failed" >&2
+ echo " $syspart partially written, you may want to reset it" >&2;;
+ 7) echo " failed" >&2
+ echo " $syspart is too small: $size bytes required" >&2
+ echo " No change made" >&2;;
+ *) echo " failed" >&2
+ echo " Internal error writing $syspart" >&2;;
+ esac
+ #
+ rm -f /tmp/sysconf.$$
+ else
+ echo "sysconf save: $syspart or $ffspart partition not found" >&2
+ echo " A RedBoot partition named '$syspart' must exist in the system" >&2
+ echo " flash memory for this command to work, and there must be a" >&2
+ echo " block device to access this partition (udev will normally" >&2
+ echo " create this automatically. The flash partition contents must" >&2
+ echo " also be accessible in a partition called '$ffspart'" >&2
+ echo
+ echo " To create the $syspart partition use the 'fis create' command" >&2
+ echo " in the RedBoot boot loader, it is sufficient to make the" >&2
+ echo " partition one erase block in size unless you have substantially" >&2
+ echo " increased the size of the files listed in /etc/default/conffiles" >&2
+ fi
+
+ return $status
+}
+
+#
+# sysconf_restore [auto]
+# restore previously saved configuration information from $syspart
+sysconf_restore_error(){
+ local root
+ root="$1"
+ shift
+ # -------------------------------------------------------------------------------
+ { echo " WARNING: saved configuration files not restored"
+ test -n "$1" && echo "$*"
+ echo
+ echo "The configuration of this machine has been reinitialised using the values"
+ echo "from /etc/default/sysconf, however configuration files saved in the $syspart"
+ echo "partition have not been restored."
+ echo
+ echo "You can restore these files by correcting any reported errors then running"
+ echo
+ echo " sysconf restore"
+ echo
+ echo "from the command line. This will completely reinitialise the configuration"
+ echo "using the information in the $syspart partition."
+ } >"$root/etc/motd"
+ cat "$root/etc/motd" >&2
+}
+#
+sysconf_restore(){
+ local sysdev ffsdev ffsdir saved restore size status sysconf_noninteractive config_root
+
+ # if set this means 'do no diff' - this avoids the code above which
+ # would open /dev/tty and therefore allows this stuff to be done from
+ # an init script
+ sysconf_noninteractive=
+ test "$1" = auto && sysconf_noninteractive=1
+
+ ffsdev="$(mtblockdev $ffspart)"
+ sysdev="$(mtblockdev $syspart)"
+ status=1
+ if test -n "$sysdev" -a -b "$sysdev" -a -n "$ffsdev" -a -b "$ffsdev" &&
+ sysconf_valid
+ then
+ # this will succeed silently if the flash device is on /
+ umountflash "$ffsdev" || exit 1
+ #
+ # Everything is umounted, now remount on a temporary directory.
+ ffsdir="/tmp/flashdisk.$$"
+ config_root="$ffsdir"
+ mkdir "$ffsdir" || {
+ echo "$0: $ffsdir: failed to create temporary directory" >&2
+ exit 1
+ }
+ #
+ mountflash "$ffsdev" "$ffsdir" || {
+ rmdir "$ffsdir"
+ exit 1
+ }
+ #
+ # first restore the $syspart section
+ sysconf_read "$ffsdir" || sysconf_default "$ffsdir"
+ #
+ # now use this to regenerate the system files
+ sysconf_reload "$ffsdir"
+ #
+ # now examine the [preserve] section, if it is there restore
+ # it if possible.
+ if test -n "$(syssection preserve)"
+ then
+ # 'saved' is a directory, 'restore' is a file (which is
+ # used to detect unrestored files). The directory needs
+ # to be populated with files.
+ saved=/tmp/cpio.$$
+ restore=/tmp/restore.$$
+ rm -rf "$saved" "$restore"
+ #
+ mkdir "$saved" || {
+ sysconf_restore_error "$ffsdir" "$saved: failed to create temporary directory"
+ return 1
+ }
+ #
+ # the CPIO archive is gzip compressed after the text part
+ # of sysconf, gzip will handle the LZ stream termination
+ # correctly (and break the pipe) so we don't need to know
+ # the real length of the data
+ devio "<<$sysdev" '<=b4+.' 'cp $s-' | gunzip | (
+ cd "$saved"
+ exec cpio -i -d -m -u
+ ) || {
+ rm -rf "$saved"
+ sysconf_restore_error "$ffsdir" "$saved: cpio -i failed"
+ return 1
+ }
+ # either there must be no 'diff' files or it must
+ # be possible to interact with a real user.
+ if test -z "$sysconf_noninteractive" ||
+ syssection preserve | sysconf_test_restore "$ffsdir" "$saved"
+ then
+ #
+ # remove the 'init' motd from sysconf_reload
+ rm "$ffsdir/etc/motd"
+ #
+ # now restore from the directory, using the information in
+ # the preserve section, if this fails in a non-interactive
+ # setting the system might not reboot
+ syssection preserve |
+ sysconf_restore_conffiles "$ffsdir" "$saved" "$restore" || {
+ # there is a chance of the user cleaning this up
+#------------------------------------------------------------------------------
+ sysconf_restore_error "$ffsdir" \
+"$0: $saved: restore of saved configuration files failed.
+ The flash file system is mounted on $ffsdir.
+ The saved files are in $saved and the list of files selected for
+ restore is in $restore.
+ You should restore any required configuration from $saved, then umount
+ $ffsdir and reboot."
+ # this prevents cleanup/umount
+ return 1
+ }
+ #
+ # remove the copied files (i.e. the ones which were preserved)
+ ( cd "$saved"
+ exec rm $(cat "$restore")
+ )
+ rm "$restore"
+ #
+ # clean up, files left in $saved need to be handled by the user
+ files="$(find "$saved" ! -type d -print)"
+ if test -n "$files"
+ then
+#------------------------------------------------------------------------------
+ sysconf_restore_error "$ffsdir" \
+"$0: some saved configuration files have not been handled:
+
+$files
+
+These files can be examined in $saved and restored to
+$ffsdir if required. The saved files are in a temporary
+directory and will not be retained across a reboot - copy then elsewhere if
+you are unsure whether they are needed."
+ return 1
+ fi
+ #
+ # so this is safe now (no files, links etc)
+ rm -rf "$saved"
+ else
+ rm -rf "$saved"
+ # non-interactive and some changed diff files
+ sysconf_restore_error "$ffsdir" \
+"$0: some of the saved configuration files must be
+examined before restoration"
+ # but continue to the umount
+ fi
+ fi
+ #
+ # ignore the error in this case:
+ umount "$ffsdir" && rmdir "$ffsdir" ||
+ echo "$0: $ffsdir: temporary directory cleanup failed" >&2
+ status=0
+ else
+ echo "sysconf restore: $syspart or $ffspart partition not found" >&2
+ echo " You must have used 'sysconf save' to save configuration data" >&2
+ echo " into the $syspart partition before using this command. The command" >&2
+ echo " will restore the configuration data to the flash root partition" >&2
+ echo " named '$ffspart' - this must also be accessible." >&2
+ fi
+
+ return $status
+}
+
+#
+# sysconf_help
+# help text
+sysconf_help(){
+ # -------------------------------------------------------------------------------
+ echo "sysconf: usage: sysconf read|default|reload|save|restore" >&2
+ echo " read: the current $syspart partition is read into /etc/default/sysconf" >&2
+ echo " default: a default /etc/default/sysconf is created" >&2
+ echo " reload: system configuration files are recreated from /etc/default/sysconf" >&2
+ echo " save: /etc/default/sysconf and the files listed in /etc/default/conffiles" >&2
+ echo " are written to the $syspart partition" >&2
+ echo " restore: the configuration information in the $syspart partition saved by" >&2
+ echo " 'sysconf save' is restored" >&2
+}
+
+#
+# the real commands
+#if [ "$(machine)" = "storcenter" ]; then
+# echo "sysconf not (yet) supported on storcenter"
+# exit 0
+#fi
+sysconf_command="$1"
+test $# -gt 0 && shift
+case "$sysconf_command" in
+read) sysconf_read "$@";;
+default)sysconf_default "$@";;
+reload) sysconf_reload "$@";;
+save) sysconf_save "$@";;
+restore)sysconf_restore "$@";;
+valid) sysconf_valid "$@";;
+
+sysconf)# just load the functions
+ ;;
+
+*) # help text
+ sysconf_help "$@";;
+esac
diff --git a/packages/openturbostation-init/files/turnup b/packages/openturbostation-init/files/turnup
new file mode 100644
index 0000000000..73befd26c9
--- /dev/null
+++ b/packages/openturbostation-init/files/turnup
@@ -0,0 +1,861 @@
+#!/bin/sh
+# turnup
+# See the help block at the end for documentation.
+#
+. /etc/default/functions
+
+#
+# configuration
+# The following variables control which directories in /var end
+# up on the rootfs and which end up in a temporary file system.
+INRAM_MEMSTICK="/var/cache /var/lock /var/log /var/run /var/tmp /var/lib/ipkg"
+INRAM_NFS="/var/cache /var/lock /var/run /var/tmp"
+INRAM_DISK=""
+
+#
+# force: override certain checks
+force=
+
+#
+# pfile: the uuid/partition file
+pfile=/etc/uuid_by_partition
+
+#
+# fstype new
+# The type of the file system mounted on "new" Outputs the last
+# piece of information found, which should be the one for the
+# currently visible mount!
+fstype() {
+ local cwd dev mp type options pass freq result
+ cwd="$(cd "$1"; /bin/pwd)"
+ result=
+ while read dev mp type options pass freq
+ do
+ case "$mp" in
+ "$cwd") result="$type";;
+ esac
+ done </proc/mounts
+ echo "$result"
+}
+
+#
+# fsoptions arguments
+# Collapses the mount (-o) options into a single list which is
+# printed on stdout. Accepts an arbitrary list of options and
+# just joins them together.
+fsoptions() {
+ local options
+ options=
+ while test $# -gt 1
+ do
+ case "$1" in
+ -t) shift;;
+ -o) if test -n "$2"
+ then
+ if test -n "$options"
+ then
+ options="$options,$2"
+ else
+ options="$2"
+ fi
+ fi
+ shift;;
+ esac
+ shift
+ done
+ if test -n "$options"
+ then
+ echo "$options"
+ else
+ echo defaults
+ fi
+}
+
+#
+# get_flash <directory> {mount options}
+# mount the flash device, writeable, on the given directory
+get_flash() {
+ local ffsdir ffsdev
+
+ ffsdir="$1"
+ shift
+ test -n "$ffsdir" -a -d "$ffsdir" || {
+ echo "$0: $ffsdir: internal error, flash mount point not a directory" >&2
+ return 1
+ }
+
+ case "$(machine)" in
+ nslu2) ffsdev="$(mtblockdev Flashdisk)";;
+ *) ffsdev="$(mtblockdev filesystem)";;
+ esac
+ umountflash "$ffsdev" &&
+ mountflash "$ffsdev" "$ffsdir" "$@"
+}
+
+#
+# check_rootfs [-i] <root fs directory>
+# Make sure the candidate rootfs is empty
+# Environment: rootdev=device or NFS root path
+check_rootfs() {
+ local fcount
+
+ case "$1" in
+ -i) shift
+ case "$force" in
+ -f) return 0;;
+ esac
+
+ fcount="$(find "$1" ! -type d -print | wc -l)"
+ test "$fcount" -eq 0 && return 0
+
+ echo "turnup: $rootdev: partition contains existing files, specify -f to overwrite" >&2
+ return 1;;
+ *) checkmount "$1" && return 0
+
+ echo "turnup: $rootdev: partition does not seem to be a valid root partition" >&2
+ echo " The partition must contain a full operating system. To ensure that" >&2
+ echo " this is the case it is checked for the following, all of which must" >&2
+ echo " exist for the bootstrap to work:" >&2
+ echo
+ echo " 1) A directory /mnt." >&2
+ echo " 2) A command line interpreter program in /bin/sh." >&2
+ echo " 3) The program chroot in /sbin or /usr/sbin." >&2
+ echo " 4) The program init in /sbin, /etc or /bin." >&2
+ echo
+ echo " One or more of these items is missing. Mount $rootdev on /mnt" >&2
+ echo " and examine its contents. You can use turnup disk|nfs -i -f" >&2
+ echo " to copy this operating system onto the disk, but it may overwrite" >&2
+ echo " files on the disk." >&2
+ return 1;;
+ esac
+}
+
+#
+# copy_rootfs old new
+# Make a copy of the given root file system, copying only the
+# directories needed. The root must be the flash file system
+copy_rootfs() {
+ local old new
+ old="$1"
+ new="$2"
+ test -d "$old" -a -d "$new" || {
+ echo "turnup: rootfs: copy $old $new: not a directory" >&2
+ return 1
+ }
+ #
+ # There are no problem file names in the flash file system, so
+ # it is possible to use -print, not -print0. The following
+ # files and directories are not copied:
+ #
+ # /dev/*
+ # /boot, /boot/*
+ # /linuxrc*
+ # /var/*
+ echo "turnup: copying root file system" >&2
+ ( cd "$1"
+ find . -mount -print |
+ sed '\@^./dev/@d;\@^./boot/@d;\@^./boot$@d;\@^./linuxrc@d;\@^./var/@d' |
+ cpio -p -d -m -u "$2"
+ ) || {
+ echo "turnup: rootfs: cpio $old $new failed" >&2
+ return 1
+ }
+ echo "done" >&2
+}
+
+#
+# setup_dev new device_table
+# In flash file systems /dev is in ramfs, in disk systems /dev
+# can be populated permanently. This is done by creating a
+# single entry '.noram' in /dev - the devices init script will
+# then populate the directory without overmounting it. The
+# devices in the passed in device table are also created, but
+# note that this is insufficient, /etc/init.d/devices must
+# also run.
+setup_dev() {
+ test -n "$1" -a -d "$1"/dev -a -r "$2" || {
+ echo "turnup: setup_dev($1,$2): expected a directory and a file" >&2
+ return 1
+ }
+ echo "turnup: initialising dev file system" >&2
+ # init tries to open the following devices:
+ # /dev/console
+ # /dev/tty0
+ # /dev/null
+ # syslog, and maybe other things, only work if fd 1 is valid, therefore
+ # we must create these devices here...
+ makedevs --root="$1" --devtable="$2"
+ :>"$1"/dev/.noram
+ return 0
+}
+
+#
+# setup_bootdev new device_table
+# As above but actually uses the supplied device table - this is possible if
+# the table is just used for boot because the extra setup is not required.
+setup_bootdev() {
+ test -n "$1" -a -d "$1"/dev -a -r "$2" || {
+ echo "turnup: setup_bootdev($1,$2): expected a directory and a file" >&2
+ return 1
+ }
+ # NOTE: this fails silently with 0 return code(!) when a directory
+ # does not exist yet things are created within it.
+ makedevs -r "$1" -D "$2"
+}
+
+#
+# setup_var new type
+# Populates /var.
+# Removes the /var tmpfs entry from /etc/fstab.
+# Creates links from /var into /media/ram for NFS and Memstick.
+setup_var() {
+ local ram_targets directory
+
+ test -n "$1" -a -d "$1"/var || {
+ echo "turnup: setup_var($1,$2): expected a directory" >&2
+ return 1
+ }
+ case "$2" in
+ disk|nfs|memstick);;
+ *) echo "turnup: setup_var($1,$2): expected 'disk', 'nfs' or 'memstick'" >&2
+ return 1;;
+ esac
+ #
+ # populate /var, there is a shell script to do this, but it uses
+ # absolute path names
+ chroot "$1" /bin/busybox sh /etc/init.d/populate-volatile.sh || {
+ echo "turnup: /var: could not populate directory" >&2
+ return 1
+ }
+
+ case "$2" in
+ disk) ram_targets="$INRAM_DISK";;
+ nfs) ram_targets="$INRAM_NFS";;
+ memstick)
+ ram_targets="$INRAM_MEMSTICK";;
+ esac
+
+ for directory in $ram_targets
+ do
+ rm -rf "$1/$directory"
+ ln -s "/media/ram/$directory" "$1/$directory"
+ done
+ # the startup link is left for the moment, this seems safer
+ #rm "$1"/etc/rc?.d/[KS]??populate-var.sh
+ # remove the /var tmpfs entry from the new /etc/fstab
+ sed -i '\@[ ]/var[ ][ ]*tmpfs[ ]@d' "$1"/etc/fstab
+ echo "turnup: tmpfs will no longer be mounted on /var" >&2
+ #
+ # Previous versions of turnup removed populate-var.sh from the
+ # startup links, this one doesn't, so /var can be made back into
+ # a tmpfs just by a change to /etc/fstab.
+ return 0
+}
+
+#
+# setup_syslog new
+# Moves the syslog to a file - appropriate for disk and nfs types, not
+# otherwise.
+setup_syslog() {
+ test -n "$1" -a -d "$1"/etc || {
+ echo "turnup: setup_syslog($1): expected a directory" >&2
+ return 1
+ }
+ #
+ # if the syslog is to the buffer redirect it to a file
+ if egrep -q '^DESTINATION="buffer"' "$1"/etc/syslog.conf
+ then
+ if cp "$1"/etc/syslog.conf "$1"/etc/syslog.conf.sav
+ then
+ # the busybox syslog will fail with ROTATESIZE and ROTATEGENS
+ sed -i 's!DESTINATION="buffer"!DESTINATION="file"!
+ /^ROTATESIZE=/d
+ /^ROTATEGENS=/d' "$1"/etc/syslog.conf
+ echo "turnup: /etc/syslog.conf: changed to file buffering" >&2
+ echo " Old (buffer) version in /etc/syslog.conf.sav" >&2
+ echo " Log messages will be in /var/log/messages" >&2
+ else
+ echo "turnup: /etc/syslog.conf: failed to make a copy" >&2
+ echo " syslog will log to a buffer" >&2
+ fi
+ fi
+ return 0
+}
+
+#
+# setup_rootfs type new device_table
+# Populates the /dev and /var directories, alters the startup to
+# not mount or populate them further. Does the right thing according
+# to the given $type
+setup_rootfs() {
+ local type new table
+ type="$1"
+ new="$2"
+ table="$3"
+
+ test -n "$new" -a -d "$new" -a -f "$table" || {
+ echo "turnup: setup_rootfs($type,$new,$table): expected a directory and a file" >&2
+ return 1
+ }
+
+ case "$type" in
+ flash) return 0;;
+ disk) setup_dev "$new" "$table" &&
+ setup_var "$new" "$type" &&
+ setup_syslog "$new";;
+ memstick)
+ setup_bootdev "$new" "$table" &&
+ setup_var "$new" "$type" ;;
+ nfs) setup_dev "$new" "$table" &&
+ setup_var "$new" "$type" &&
+ setup_syslog "$new";;
+ *) echo "turnup: setup_rootfs: $type: unknown rootfs type" >&2
+ return 1;;
+ esac
+ # return code of last setup function
+}
+
+#
+# setup_fstab new fsdev fstype fsoptions
+# Alters the /etc/fstab entry for / to refer to the correct device and
+# have the correct type and options. Essential for checkroot to remount
+# / with the correct options. Writes the initial uuid file.
+# bad, since sed won't fail even if it changes nothing.
+setup_fstab() {
+ sed -i '\@^[^ ]*[ ][ ]*/[ ]@s@^.*$@'"$2 / $3 $4 1 1"'@' "$1"/etc/fstab
+ egrep -q "^$2 / $3 $4 1 1\$" "$1"/etc/fstab || {
+ echo "turnup: /etc/fstab: root(/) entry not changed" >&2
+ echo " you probably need to check the options in /etc/fstab" >&2
+ echo " to ensure that the root partition is mounted correctly" >&2
+ return 1
+ }
+ #
+ # build $pfile
+ uuid_by_partition >"$1""$pfile" ||
+ echo "turnup: $pfile: blkid failed (ignored)" >&2
+ return 0
+}
+
+#
+# boot_rootfs <boot type> <flash file system> <sleep time> (<device> <uuid>|<nfsroot>) [options]
+# Change the flash partition (not the current root!) to boot off
+# the new root file system
+boot_rootfs() {
+ local type ffs sleep device uuid opt
+
+ type="$1"
+ ffs="$2"
+ sleep="$3"
+ device="$4"
+ uuid=
+
+ # test this first as the test does not depend on the correctness
+ # of the other arguments
+ test -n "$ffs" -a -d "$ffs" || {
+ echo "turnup: boot_rootfs($type, $ffs, $device): expected directory" >&2
+ return 1
+ }
+ test -x "$ffs"/boot/"$type" || {
+ echo "turnup: boot_rootfs($type, $ffs, $device): invalid boot type $type" >&2
+ return 1
+ }
+ shift
+ shift
+
+ case "$type" in
+ disk) test -n "$device" -a -b "$device" || {
+ echo "turnup: boot_rootfs($ffs, $type, $device): expected block device" >&2
+ return 1
+ }
+ uuid="$3"
+ shift 3;;
+ nfs) shift 2;;
+ flash) ;;
+ ram) ;;
+ *) echo "turnup: boot_rootfs($type, $ffs, $device): unknown type" >&2
+ return 1;;
+ esac
+
+ #
+ # The /linuxrc records the correct options to mount the device,
+ # since we have already mounted if correctly with these options
+ # we can be sure (maybe) that the boot will work. If not /boot/disk
+ # falls back to flash.
+ #
+ # This modifies the boot process, until this point no harm has been
+ # done to the system, but at this point the boot rootfs will change
+ rm -f "$ffs"/linuxrc.new || {
+ echo "turnup: boot_rootfs: failed to remove $ffs/linuxrc.new" >&2
+ return 1
+ }
+ case "$type" in
+ flash) ln -s "boot/flash" "$ffs"/linuxrc.new || {
+ echo "turnup: boot_rootfs: failed to create $ffs/linuxrc.new" >&2
+ return 1
+ };;
+ ram) { echo '#!/bin/sh'
+ echo 'rm -f /linuxrc.new'
+ echo 'ln -s boot/flash /linuxrc.new'
+ echo 'mv /linuxrc.new /linuxrc'
+ echo 'exec /boot/ram /dev/ram0'
+ echo 'exec /boot/flash'
+ } >"$ffs"/linuxrc.new &&
+ chmod 744 "$ffs"/linuxrc.new || {
+ echo "turnup: boot_rootfs: failed to write $ffs/linuxrc.new" >&2
+ return 1
+ };;
+ *) { echo '#!/bin/sh'
+ test "$sleep" -gt 0 && echo -n "sleep='$sleep' "
+ test -n "$uuid" && echo -n "UUID='$uuid' "
+ echo -n "exec '/boot/$type' '$device'"
+ for opt in "$@"
+ do
+ echo -n " '$opt'"
+ done
+ echo
+ echo 'exec /boot/flash'
+ } >"$ffs"/linuxrc.new &&
+ chmod 744 "$ffs"/linuxrc.new || {
+ echo "turnup: boot_rootfs: failed to write $ffs/linuxrc.new" >&2
+ return 1
+ };;
+ esac
+ rm -f "$ffs"/linuxrc.sav || {
+ echo "turnup: boot_rootfs: failed to remove $ffs/linuxrc.sav" >&2
+ return 1
+ }
+ ln "$ffs"/linuxrc "$ffs"/linuxrc.sav || {
+ echo "turnup: boot_rootfs: failed to save /linuxrc.sav" >&2
+ return 1
+ }
+ mv -f "$ffs"/linuxrc.new "$ffs"/linuxrc || {
+ echo "turnup: boot_rootfs: failed to install new /linuxrc" >&2
+ return 1
+ }
+ return 0
+}
+
+#
+# disk [-m] [-i] [-s<time>] <device> {options}
+# Carefully copy the flash file system to the named device.
+disk() {
+ local setup_type sleep init device uuid new ffs fst fso
+
+ setup_type=disk
+ sleep=0
+ init=
+ while test $# -gt 0
+ do
+ case "$1" in
+ -f) force="$1"
+ shift;;
+ -m) setup_type=memstick
+ shift;;
+ -i) init="$1"
+ shift;;
+ -s*) sleep="${1#-s}"
+ sleep="${sleep:-10}"
+ shift;;
+ *) break;;
+ esac
+ done
+
+ device="$1"
+ test -n "$device" -a -b "$device" || {
+ echo "turnup disk: $device: block device required" >&2
+ return 1
+ }
+ shift
+
+ # find the uuid if available
+ uuid="$(blkid -c /dev/null -s UUID -o value "$device")"
+ # XXX nasty hack - using the UUID fails on storcenter, for now,
+ # probably due to various devfs problems. fix later.
+ if [ $(machine) = storcenter ]; then
+ uuid=
+ fi
+
+ # make temporary directories for the mount points
+ new="/tmp/rootfs.$$"
+ ffs="/tmp/flashdisk.$$"
+ mkdir "$new" "$ffs" || {
+ echo "turnup: disk: failed to create temporary directories" >&2
+ return 1
+ }
+
+ # make sure we can get to the flash file system first
+ get_flash "$ffs" || {
+ rmdir "$new" "$ffs"
+ return 1
+ }
+
+ # Now mount the device with the given options, note that specifying
+ # read only is *not* an option, this is important because the boot/disk
+ # script needs a rw file system
+ status=1
+ fst=
+ fso="$(fsoptions "$@")"
+ if if test -n "$uuid"
+ then
+ mount "$@" -U "$uuid" "$new"
+ else
+ mount "$@" "$device" "$new"
+ fi
+ then
+ fst="$(fstype "$new")"
+ umount "$new" ||
+ echo "turnup disk: $device($new): umount does not seem to work" >&2
+ fi
+
+ if test -n "$fst" &&
+ if test -n "$uuid"
+ then
+ mount -t "$fst" -o "$fso" -U "$uuid" "$new"
+ else
+ mount -t "$fst" -o "$fso" "$device" "$new"
+ fi
+ then
+ if rootdev="$device" check_rootfs $init "$new" && {
+ test -z "$init" || {
+ copy_rootfs "$ffs" "$new" &&
+ setup_rootfs "$setup_type" "$new" "$ffs"/etc/device_table
+ }
+ }
+ then
+ setup_fstab "$new" "$device" "$fst" "$fso"
+ status=0
+ fi
+
+ # clean up the disk. It is worrying if this umount fails!
+ umount "$new" || test "$force" = "-f" || {
+ echo "turnup disk: $device: umount failed" >&2
+ echo " you must unmount this device cleanly yourself, then use" >&2
+ if test -z "$init"
+ then
+ echo " turnup with the -f option to boot from the device" >&2
+ else
+ echo " turnup without the -i option to boot from the device" >&2
+ fi
+ status=1
+ }
+
+ # if everything went ok boot from this disk
+ if test $status -eq 0
+ then
+ # memsticks boot like disks, so ignore the -m
+ boot_rootfs disk "$ffs" "$sleep" "$device" "$uuid" -t "$fst" -o "$fso"
+ fi
+ else
+ echo "turnup disk: $device($*): unable to mount device on $new" >&2
+ # If it worked first time
+ if test -n "$fst"
+ then
+ echo " options used: -t $fst -o $fso [error in this script]" >&2
+ test -n "$uuid" &&
+ echo " uuid: $uuid (passed with -U)" >&2
+ fi
+ fi
+
+ # clean up the flash file system
+ umount "$ffs"
+ rmdir "$new" "$ffs"
+ return $status
+}
+
+#
+# boot_reset <type>
+# Resets the boot type to flash or ram, as appropriate
+boot_reset() {
+ local ffs typ status
+
+ case "$1" in
+ flash|ram)type="$1"
+ shift;;
+ *) echo "turnup: boot_reset($1): invalid type" >&2
+ return 1;;
+ esac
+
+ ffs="/tmp/flashdisk.$$"
+ mkdir "$ffs" || {
+ echo "turnup: $1: failed to create temporary directory" >&2
+ return 1
+ }
+
+ get_flash "$ffs" || {
+ rmdir "$ffs"
+ return 1
+ }
+
+ # now try to set the /linuxrc appropriately
+ boot_rootfs "$type" "$ffs"
+ status=$?
+
+ # clean up
+ umount "$ffs"
+ rmdir "$ffs"
+ return $status
+}
+
+#
+# nfs [-i] <root partition> {options}
+# Copy the flash file system to the given NFS root partition.
+nfs() {
+ local init nfsroot new ffs
+
+ init=
+ while test $# -gt 0
+ do
+ case "$1" in
+ -i) init="$1"
+ shift;;
+ -f) force="$1"
+ shift;;
+ *) break;;
+ esac
+ done
+
+ nfsroot="$1"
+ test -n "$nfsroot" || {
+ echo "turnup nfs: $nfsroot: NFS root file system required" >&2
+ return 1
+ }
+ shift
+
+ # make temporary directories for the mount points
+ new="/tmp/rootfs.$$"
+ ffs="/tmp/flashdisk.$$"
+ mkdir "$new" "$ffs" || {
+ echo "turnup nfs: failed to create temporary directories" >&2
+ return 1
+ }
+
+ # make sure we can get to the flash file system first
+ get_flash "$ffs" || {
+ rmdir "$new" "$ffs"
+ return 1
+ }
+
+ # Now mount the device with the given options, note that specifying
+ # read only is *not* an option, this is important because the boot/disk
+ # script needs a rw file system
+ status=1
+ fst=
+ # These settings for for NFS, something better will probably have to
+ # be done to support other network file systems.
+ nfsopt="nolock,noatime,hard,intr,rsize=1024,wsize=1024"
+ fso="$(fsoptions -o "$nfsopt" "$@")"
+ if mount -o "$nfsopt" "$@" "$nfsroot" "$new"
+ then
+ fst="$(fstype "$new")"
+ umount "$new" ||
+ echo "turnup nfs: $nfsroot($new): umount does not seem to work" >&2
+ fi
+
+ if test -n "$fst" && mount -t "$fst" -o "$fso" "$nfsroot" "$new"
+ then
+ if :>"$new"/ttt && test -O "$new"/ttt && rm "$new"/ttt
+ then
+ if rootdev="$nfsroot" check_rootfs $init "$new" && {
+ test -z "$init" || {
+ copy_rootfs "$ffs" "$new" &&
+ setup_rootfs nfs "$new" "$ffs"/etc/device_table
+ }
+ }
+ then
+ setup_fstab "$new" "$nfsroot" "$fst" "$fso"
+ status=0
+ fi
+ else
+ echo "turnup nfs: $nfsroot: partition must be exported no_root_squash" >&2
+ fi
+
+ # clean up the disk. It is worrying if this umount fails!
+ umount "$new" || test "$force" = "-f" || {
+ echo "turnup nfs: $nfsroot: umount failed" >&2
+ if test $status -eq 0
+ then
+ echo " you must unmount this partition cleanly yourself, then use" >&2
+ if test -z "$init"
+ then
+ echo " turnup with the -f option to boot from the NFS root" >&2
+ else
+ echo " turnup without the -i option to boot from the NFS root" >&2
+ fi
+ status=1
+ fi
+ }
+
+ # if everything went ok boot from this disk
+ if test $status -eq 0
+ then
+ # the options used are exactly those which worked before.
+ boot_rootfs nfs "$ffs" 0 "$nfsroot" -t nfs -o "$fso"
+ fi
+ else
+ echo "turnup nfs: $nfsroot($*): unable to mount device on $new" >&2
+ # If it worked first time
+ if test -n "$fst"
+ then
+ echo " options obtained: -t $fst -o $fso" >&2
+ fi
+ fi
+
+ # clean up the flash file system
+ umount "$ffs"
+ rmdir "$new" "$ffs"
+ return $status
+}
+
+#
+# read_one 'prompt' 'group' 'name'
+# read a single value
+read_one() {
+ local n o
+ o="$(sysval "$2" "$3")"
+ echo -n "$1 [$o]: " >/dev/tty
+ read n </dev/tty
+ test -z "$n" && n="$o"
+ eval "$3='$n'"
+}
+
+#
+# init_network
+# Change the network initialisation
+init_network() {
+ # fix the root password
+ echo "Please enter a new password for 'root'." >/dev/tty
+ echo "The password must be non-empty for ssh login to succeed!" >/dev/tty
+ passwd
+ # now the network configuration
+ read_one "Host name" network disk_server_name
+ read_one "Domain name" network w_d_name
+ read_one "Boot protocol (dhcp|static)" network bootproto
+ case "$bootproto" in
+ static) read_one "IP address" network ip_addr
+ read_one "IP netmask" network netmask
+ read_one "IP gateway" network gateway
+ read_one "First DNS server" network dns_server1
+ read_one "Second DNS server" network dns_server2
+ read_one "Third DNS server" network dns_server3
+ echo "$ip_addr $disk_server_name" >> /etc/hosts
+ ;;
+ dhcp) sed -i -e "s/localhost\$/localhost $disk_server_name/" /etc/hosts
+ ;;
+ *) bootproto=dhcp;;
+ esac
+ #
+ # The other stuff which cannot be changed
+ hw_addr="$(config mac)"
+ lan_interface="$(config iface)"
+ #
+ # Write this out to a new sysconf
+ { echo "[network]"
+ echo "hw_addr=$hw_addr"
+ echo "lan_interface=$lan_interface"
+ test -n "$disk_server_name" && echo "disk_server_name=$disk_server_name"
+ test -n "$w_d_name" && echo "w_d_name=$w_d_name"
+ echo "bootproto=$bootproto"
+ case "$bootproto" in
+ static) echo "ip_addr=$ip_addr"
+ test -n "$netmask" && echo "netmask=$netmask"
+ test -n "$gateway" && echo "gateway=$gateway"
+ test -n "$dns_server1" && echo "dns_server1=$dns_server1"
+ test -n "$dns_server2" && echo "dns_server2=$dns_server2"
+ test -n "$dns_server3" && echo "dns_server3=$dns_server3"
+ ;;
+ esac
+ } >/etc/default/sysconf
+ #
+ # And reload the result
+ sysconf reload
+ #
+ # The remove the spurious 'init' motd
+ rm /etc/motd
+}
+
+#
+# Basic command switch (this should be the only thing in this
+# script which actually does anything!)
+case "$1" in
+init) shift
+ if init_network "$@"
+ then
+ echo "turnup init: you must reboot for the changes to take effect" >&2
+ echo " You may want to run 'turnup preserve' to save these settings," >&2
+ echo " after making any additional configuration changes which you" >&2
+ echo " require." >&2
+ else
+ exit 1
+ fi;;
+disk) shift
+ disk "$@";;
+memstick)
+ shift
+ disk -m "$@" -o noatime;;
+nfs) shift
+ nfs "$@";;
+flash) boot_reset flash;;
+ram) boot_reset ram;;
+preserve)
+ shift
+ sysconf save "$@";;
+restore)
+ shift
+ sysconf restore "$@";;
+*) echo "\
+usage: turnup command [options]
+ commands:
+ help
+ output this help
+ init
+ correct errors in network information
+ initialise network information when DHCP is not available
+ change network information
+ disk [-i] [-s<seconds>] <device>|<uuid> [mount options]
+ With -i make <device> a bootable file system then (with or
+ without -i) arrange for the next reboot to use that device.
+ The device must already be formatted as a file system, with
+ -i it must be completely empty, without it must contain an
+ apparently bootable file system. -s (for example -s5)
+ specifies a delay in seconds to wait at boot time before
+ mounting the device.
+ memstick [-i] <device>|<uuid> [mount options]
+ Behaves as disk however options appropriate to a flash memory
+ stick are automatically added
+ nfs [-i] <nfs mount path> [mount options]
+ <nfs mount path> must be a mountable NFS file system. With
+ -i the partition must be empty and is initialised with a
+ bootable file system. Without -i the partition must already
+ contain a bootable file system. In either case the NFS
+ partition must be available to be mounted without root id
+ sqashing (i.e. root must be root) and it will be selected
+ as the root file system for subsequent reboots.
+ A default set of -o options are provided, additional options
+ may be given on the command line (multiple -o options will
+ be combined into a single -o).
+ flash
+ Revert to booting from the flash disk on next reboot.
+ ram
+ Boot (once) into a ramdisk, subsequent boots will be to
+ the flash file system.
+ preserve
+ Save the system configuration to the SysConf partition, you
+ will need to create the SysConf partition from the boot loader
+ before using this if SysConf does not already exist. This
+ just runs 'sysconf save'.
+ restore
+ Restore a previously saved system configuration. This just
+ runs 'sysconf restore'.
+ disk formatting:
+ The argument to 'nfs' or 'disk' must be an empty partition
+ of sufficient size to hold the root file system (at least
+ 16MByte but more is recommended to allow package installation).
+ An appropriate ext3 partition can be made using the command:
+
+ mke2fs -j <device> # for example: /dev/sda1
+
+ An appropriate NFS partition can be emptied using 'rm', but
+ must be set up (exported) on the NFS server." >&2
+ exit 0;;
+esac
+# Exit with return code from command.
diff --git a/packages/openturbostation-init/openprotium-init_0.10.bb b/packages/openturbostation-init/openprotium-init_0.10.bb
new file mode 100644
index 0000000000..91a690224d
--- /dev/null
+++ b/packages/openturbostation-init/openprotium-init_0.10.bb
@@ -0,0 +1,148 @@
+DESCRIPTION = "Turbostation initial boot and config"
+SECTION = "base"
+PRIORITY = "required"
+LICENSE = "GPL"
+DEPENDS = "base-files devio"
+RDEPENDS = "busybox devio"
+PR = "r71"
+
+SRC_URI = "file://boot/flash \
+ file://boot/disk \
+ file://boot/nfs \
+ file://boot/network \
+ file://boot/udhcpc.script \
+ file://initscripts/fixfstab \
+ file://initscripts/syslog.buffer \
+ file://initscripts/syslog.file \
+ file://initscripts/syslog.network \
+ file://initscripts/rmrecovery \
+ file://initscripts/sysconfsetup \
+ file://initscripts/umountinitrd.sh \
+ file://initscripts/loadmodules.sh \
+ file://functions \
+ file://modulefunctions \
+ file://conffiles \
+ file://sysconf \
+ file://turnup \
+ file://reflash \
+ file://links.conf \
+ "
+
+SBINPROGS = ""
+USRSBINPROGS = ""
+CPROGS = "${USRSBINPROGS} ${SBINPROGS}"
+SCRIPTS = "turnup reflash sysconf"
+BOOTSCRIPTS = "flash disk nfs network udhcpc.script"
+INITSCRIPTS = "syslog.buffer syslog.file syslog.network \
+ rmrecovery sysconfsetup umountinitrd.sh \
+ fixfstab loadmodules.sh"
+
+# This just makes things easier...
+
+S="${WORKDIR}"
+
+do_compile() {
+ set -ex
+ for p in ${CPROGS}
+ do
+ ${CC} ${CFLAGS} -o $p $p.c
+ done
+ set +ex
+}
+
+do_install() {
+ set -ex
+
+ # Directories
+ install -d ${D}${sysconfdir} \
+ ${D}${sysconfdir}/default \
+ ${D}${sysconfdir}/init.d \
+ ${D}${sysconfdir}/modutils \
+ ${D}${sysconfdir}/udev \
+ ${D}${sbindir} \
+ ${D}${base_sbindir} \
+ ${D}/initrd \
+ ${D}/boot
+
+ # linuxrc
+ rm -f ${D}/linuxrc
+ ln -s boot/flash ${D}/linuxrc
+
+ # C programs
+ for p in ${USRSBINPROGS}
+ do
+ install -m 0755 $p ${D}${sbindir}/$p
+ done
+ for p in ${SBINPROGS}
+ do
+ install -m 0755 $p ${D}${base_sbindir}/$p
+ done
+
+ # Shell scripts
+ for p in ${SCRIPTS}
+ do
+ install -m 0755 $p ${D}${base_sbindir}/$p
+ done
+
+ #
+ # Init scripts
+ install -m 0644 functions ${D}${sysconfdir}/default
+ install -m 0644 modulefunctions ${D}${sysconfdir}/default
+ for s in ${INITSCRIPTS}
+ do
+ install -m 0755 initscripts/$s ${D}${sysconfdir}/init.d/
+ done
+
+ #
+ # Udev configuration files
+ install -m 0644 links.conf ${D}${sysconfdir}/udev
+
+ #
+ # Boot scripts
+ for p in ${BOOTSCRIPTS}
+ do
+ install -m 0755 boot/$p ${D}/boot
+ done
+
+ # Configuration files
+ install -m 0644 conffiles ${D}${sysconfdir}/default
+
+ set +ex
+}
+
+# If the package is installed on an NSLU2 $D will be empty, in that
+# case it is normal to run 'start' and 'stop', but because the conf
+# files installed don't actually start or stop anything this is
+# unnecessary, so the package postfoo handling is simplified here.
+#NB: do not use '08' (etc) for the first argument after start/stop,
+# the value is interpreted as an octal number if there is a leading
+# zero.
+pkg_postinst_openturbostation-init() {
+ opt=
+ test -n "$D" && opt="-r $D"
+ update-rc.d $opt hwclock.sh start 8 S . start 45 0 6 .
+ update-rc.d $opt umountinitrd.sh start 9 S .
+ update-rc.d $opt fixfstab start 10 S .
+ update-rc.d $opt syslog.buffer start 11 S . start 49 0 6 .
+ update-rc.d $opt sysconfsetup start 12 S .
+ update-rc.d $opt loadmodules.sh start 21 S .
+ update-rc.d $opt syslog.file start 39 S . start 47 0 6 .
+ update-rc.d $opt syslog.network start 44 S . start 39 0 6 .
+ update-rc.d $opt rmrecovery start 99 1 2 3 4 5 .
+}
+
+pkg_postrm_openturbostation-init() {
+ opt=
+ test -n "$D" && opt="-r $D"
+ for s in ${INITSCRIPTS}
+ do
+ update-rc.d $opt "$s" remove
+ done
+}
+
+PACKAGES = "${PN}"
+FILES_${PN} = "/"
+
+# It is bad to overwrite /linuxrc as it puts the system back to
+# a flash boot (and the flash has potentially not been upgraded!)
+CONFFILES_${PN} = "/linuxrc ${sysconfdir}/default/conffiles"
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 04:27:02 +0000