summaryrefslogtreecommitdiff
path: root/packages/openslug-init/openslug-init-0.10
diff options
context:
space:
mode:
Diffstat (limited to 'packages/openslug-init/openslug-init-0.10')
-rw-r--r--packages/openslug-init/openslug-init-0.10/reflash546
1 files changed, 546 insertions, 0 deletions
diff --git a/packages/openslug-init/openslug-init-0.10/reflash b/packages/openslug-init/openslug-init-0.10/reflash
index e69de29bb2..dc6ef0bbd8 100644
--- a/packages/openslug-init/openslug-init-0.10/reflash
+++ b/packages/openslug-init/openslug-init-0.10/reflash
@@ -0,0 +1,546 @@
+#!/bin/sh
+# reflash
+# ensure the flash disk is not mounted
+# save configuration files
+# update the kernel
+# update the flashdisk
+# restore the saved configuration files
+# the set of configuration files is described by
+# /etc/default/conffiles.
+#
+# /etc/default/functions contains useful utility functions
+. /etc/default/functions
+#
+# CHECKING THE ENVIRONMENT
+# ------------------------
+# basic setup. This could be parameterised to use different partitions!
+ffspart=Flashdisk
+kpart=Kernel
+#
+ffsdev="$(mtblockdev $ffspart)"
+test -n "$ffsdev" -a -b "$ffsdev" || {
+ echo "reflash: $ffspart($ffsdev): cannot find $ffspart mtd partition." >&2
+ echo " check /proc/mtd, either the partition does not exist or there is no" >&2
+ echo " corresponding block device." >&2
+ exit 1
+}
+ffssize="$(devio "<<$ffsdev" 'pr$')"
+#
+kdev="$(mtblockdev $kpart)"
+test -n "$kdev" -a -b "$kdev" || {
+ echo "reflash: $kpart($kdev): cannot find $kpart mtd partition." >&2
+ echo " check /proc/mtd, either the partition does not exist or there is no" >&2
+ echo " corresponding block device." >&2
+ exit 1
+}
+ksize="$(devio "<<$kdev" 'pr$')"
+#
+# find the device number of the flash partition then make sure it isn't
+# mounted anywhere.
+ffsno="$(devio "<<$ffsdev" prd)"
+test -n "$ffsno" -a "$ffsno" -ge 0 || {
+ echo "reflash: $ffsdev: device number $ffsno is not valid, cannot continue." >&2
+ exit 1
+}
+#
+# Make sure that Flashdisk isn't mounted on /
+if test "$(devio "<</etc/init.d/sysconfsetup" prd)" -eq "$ffsno"
+then
+ echo "reflash: $ffsdev is mounted on /, use turnup ram to reflash" >&2
+ exit 1
+fi
+#
+# CHECKING FOR INPUT (ARGUMENTS ETC)
+# ----------------------------------
+#
+# find the kernel and the new flash file system, they default to /boot/zImage
+# and /boot/rootfs.jffs2, an image file can be used to specify both images.
+ffsfile=/boot/rootfs.jffs2
+kfile=/boot/zImage
+imgfile=
+while test $# -gt 0
+do
+ case "$1" in
+ -k) shift
+ test $# -gt 0 || {
+ echo "reflash: -k: give the file containing the kernel image" >&2
+ exit 1
+ }
+ kfile="$1"
+ imgfile=
+ shift;;
+ -j) shift
+ test $# -gt 0 || {
+ echo "reflash: -j: give the file containing the root jffs2 image" >&2
+ exit 1
+ }
+ ffsfile="$1"
+ imgfile=
+ shift;;
+ -i) shift
+ test $# -gt 0 || {
+ echo "reflash: -i: give the file containing the complete flash image" >&2
+ exit 1
+ }
+ imgfile="$1"
+ shift;;
+ *) echo "reflash: usage: $0 [-k kernel -j rootfs] | -i image" >&2
+ echo " -k [$kfile]: the new compressed kernel image ('zImage')" >&2
+ echo " -j [$ffsfile]: the new root file system (jffs2)" >&2
+ echo " -i image: a complete flash image (gives both kernel and jffs2)" >&2
+ echo " The current jffs2 will be umounted if mounted." >&2
+ exit 1;;
+ esac
+done
+#
+# Perform basic checks on the input (must exist, size must be ok).
+if test -n "$imgfile"
+then
+ kfile=
+ ffsfile=
+ if test -r "$imgfile"
+ then
+ # read the partition table and from this find the offset
+ # and size of Kernel and Flashdisk partitions. The following
+ # devio command just dumps the partition table in a format
+ # similar to /proc/mtd (but it outputs decimal values!)
+ #NOTE: this uses a here document because this allows the while
+ # loop to set the variables, a pipe would put the while in
+ # a sub-shell and the variable settings would be lost. This
+ # works in ash, no guarantees about other shells!
+ while read size base name
+ do
+ case "$name" in
+ Kernel) imgksize="$size"
+ imgkoffset="$base";;
+ Flashdisk)
+ imgffssize="$size"
+ imgffsoffset="$base";;
+ esac
+ done <<EOI
+$(devio "<<$imgfile" '
+ <= $ 0x20000 -
+ $( 1
+ # 0xff byte in name[0] ends the partition table
+ $? @ 255 =
+ # output size base name
+ <= f15+
+ .= b 0xfffffff &
+ <= f4+
+ .= b
+ pf "%lu %lu "
+ <= f28-
+ cp 16
+ pn
+ <= f240+
+ $) 1')
+EOI
+ # check the result
+ test -n "$imgksize" -a "$imgksize" -gt 0 -a "$imgksize" -le "$ksize" || {
+ echo "reflash: $imgfile: bad kernel size ($imgksize, max $ksize)" >&2
+ exit 1
+ }
+ test -n "$imgffssize" -a "$imgffssize" -gt 0 -a "$imgffssize" -le "$ffssize" || {
+ echo "reflash: $imgfile: bad flashdisk size ($imgffssize, max $ffssize)" >&2
+ exit 1
+ }
+ else
+ echo "reflash: $imgfile: image file not found" >&2
+ exit 1
+ fi
+else
+ if test -r "$kfile"
+ then
+ # check the size
+ s="$(devio "<<$kfile" 'pr$')"
+ test -n "$s" -a "$s" -gt 0 -a "$s" -le "$ksize" || {
+ echo "reflash: $kfile: bad size ($s, max $ksize)" >&2
+ exit 1
+ }
+ else
+ echo "reflash: $kfile: kernel file not found" >&2
+ exit 1
+ fi
+ if test -r "$ffsfile"
+ then
+ s="$(devio "<<$ffsfile" 'pr$')"
+ test -n "$s" -a "$s" -gt 0 -a "$s" -le "$ffssize" || {
+ echo "reflash: $ffsfile: bad size ($s, max $ffssize)" >&2
+ exit 1
+ }
+ else
+ echo "reflash: $ffsfile: root file system image file not found" >&2
+ exit 1
+ fi
+fi
+#
+# INPUTS OK, UMOUNT ANY EXISTING MOUNT OF THE FLASHDISK
+# ----------------------------------------------------
+echo "reflash: umounting any existing mount of $ffsdev" >&2
+#
+# check each mount point, do this last first because otherwise nested
+# mounts of ffsdev cannot be umounted.
+ffs_umount() {
+ local device mp type options stuff
+
+ read device mp type options stuff
+ test -z "$device" && return 0
+
+ # handle following entries first
+ ffs_umount || return 1
+
+ # handle this entry
+ case "$type" in
+ jffs2) test "$(devio "<<$mp/etc/init.d/sysconfsetup" prd)" -ne "$ffsno" ||
+ umount "$mp" || {
+ echo "reflash: $mp: unable to umount $ffsdev" >&2
+ return 1
+ };;
+ esac
+
+ return 0
+}
+#
+ffs_umount </proc/mounts || {
+ echo "reflash: umount $ffsdev from all mount points then re-run reflash" >&2
+ exit 1
+}
+#
+# Everything is umounted, now remount on a temporary directory.
+ffsdir="/tmp/flashdisk.$$"
+mkdir "$ffsdir" || {
+ echo "reflash: $ffsdir: failed to create temporary directory" >&2
+ exit 1
+}
+#
+mountflash "$ffsdir" -o ro || {
+ rmdir "$ffsdir"
+ exit 1
+}
+#
+# this is a utility function to make the cleanup easier
+errorexit() {
+ umount "$ffsdir" && rmdir "$ffsdir" ||
+ echo "reflash: $ffsdir: temporary directory cleanup failed" >&2
+ exit 1
+}
+#
+test -r "$ffsdir/etc/default/conffiles" || {
+ echo "reflash: [/initrd]/etc/default/conffiles: file not found" >&2
+ errorexit
+}
+#
+# PRESERVE EXISTING CONFIGURATION
+# -------------------------------
+echo "reflash: preserving existing configuration file" >&2
+#
+# This step produces /tmp/preserve.$$ and /tmp/cpio.$$, the former is
+# a list of the preserved configuration files together with the processing
+# option, the latter is a directory tree of the preserved files (a directory
+# tree makes the restore step easier.)
+saved=/tmp/cpio.$$
+list=/tmp/preserve.$$
+mkdir "$saved" || {
+ echo "reflash: $saved: could not create save directory" >&2
+ errorexit
+}
+#
+( cd "$ffsdir"
+ find etc/*.conf $(sed 's!^/!!' usr/lib/ipkg/info/*.conffiles) ! -type d -newer etc/.configured -print |
+ sed 's/^/diff /'
+ exec sed 's/#.*$//;/^[ ]*$/d' etc/default/conffiles
+) | sed 's!^/*!!' | awk '{ op=$1; $1=""; file[$0]=op }
+ END{ for (f in file) if (file[f] != "ignore") print file[f] f }' |
+while read op file
+do
+ if test -e "$ffsdir/$file"
+ then
+ echo "$op $file" >&3
+ echo "$file"
+ fi
+done 3>"$list" | (cd "$ffsdir"; exec cpio -p -d -m -u "$saved") || {
+ echo "reflash: $saved: copy of saved configuration files failed" >&2
+ rm -rf "$saved"
+ rm "$list"
+ errorexit
+}
+#
+# If this umount fails do not try to continue...
+umount "$ffsdir" || {
+ echo "reflash: $ffsdir: temporary mount point umount failed" >&2
+ echo " No changes have been made." >&2
+ rm -rf "$saved"
+ rm "$list"
+ exit 1
+}
+#
+# FLASH THE NEW IMAGES
+# --------------------
+echo "reflash: about to flash new images" >&2
+#
+# If the images are in separate files do this in two steps, kernel then
+# rootfs (this seems like it might be safer if the first fails). For an
+# image file use one step but still write the kernel first.
+do_devio() {
+ if test -r "$imgfile"
+ then
+ # image file case - copy the whole of the image partition,
+ # which already includes headers (etc).
+ devio "$@" "<<$imgfile" ">>$ffsdev" ">>$kdev" '
+ # kernel is at imgkoffset[imgksize]
+ ' "<= $imgkoffset" "cp $imgksize" '
+ fb #t-,255
+ ' "<>$kdev" ">>$ffsdev" '
+ # rootfs is at imgffsoffset[imgffssize]
+ ' "<= $imgffsoffset" "cp $imgffssize" '
+ fb #t-,255'
+ elif test -r "$kfile" -a -r "$ffsfile"
+ then
+ # use separate files, do this in one command to be sure
+ # that everything can be opened at the start
+ devio "$@" "<<$ffsfile" ">>$ffsdev" "<<$kfile" ">>$kdev" '
+ # kernel write length+16,0,0,0 header, then fill
+ wb $16+,4
+ fb 12,0
+ cp $
+ fb #t-,255
+ ' "<>$kfile" "<>$kdev" "<<$ffsfile" ">>$ffsdev" '
+ # rootfs, write the whole image, fill if necessary
+ cp $
+ fb #t-,255'
+ else
+ # oops, my checking was wrong...
+ echo "reflash: internal error: image files not found!" >&2
+ echo " No changes have been made." >&2
+ exit 2
+ fi
+}
+#
+echo "reflash: writing kernel to $kdev and rootfs to $ffsdev..." >&2
+do_devio
+st=$?
+case "$st" in
+0) ;;
+1) echo "reflash: flash of new images failed, no changes have been made" >&2
+ rm -rf "$saved"
+ rm "$list"
+ exit 1;;
+3) echo "reflash: WARNING: partial flash, the system is unbootable" >&2
+ echo " Reflash from RedBoot or correct the problem here." >&2
+ exit 3;;
+*) echo "reflash($st): internal error" >&2
+ exit $st;;
+esac
+echo " ... done" >&2
+#
+# verify - this just produces a warning
+echo "reflash: verifying new flash image..." >&2
+do_devio -v || {
+ echo "reflash: WARNING: flash image verification failed" >&2
+ echo " The system is probably unbootable." >&2
+ echo " System configuration files will be restored but this may fail" >&2
+ echo " Starting a shell for user recovery (exit to continue)" >&2
+ PS1='badflash$ ' sh -i <>/dev/tty >&0 2>&0
+}
+echo " ... done" >&2
+#
+# RESTORE THE OLD CONFIGURATION
+# -----------------------------
+echo "reflash: restoring saved configuration files" >&2
+#
+# the file /etc/.configured is the datestamp file used to ensure that
+# changed configuration files can be recognised. It is created by
+# /etc/rcS.d/S99finish on first boot (if it does not exist). We need
+# a timestamp earlier than any files we create so touch it here, this
+# also acts as a test on the mounted file system
+mountflash "$ffsdir" && :>"$ffsdir/etc/.configured" || {
+ rmdir "$ffsdir"
+ echo "reflash: mount of new flash root file system failed" >&2
+ if test -d "$ffsdir/etc"
+ then
+ echo " The file system does not seem to be writeable." >&2
+ echo " The mounted file system is in $ffsdir" >&2
+ fi
+ echo " WARNING: the kernel and root file system have been reflashed," >&2
+ echo " HOWEVER the new root file system seems to be unuseable." >&2
+ echo " Saved configuration files are in $saved" >&2
+ echo " The list of saved configuration files is in $list" >&2
+ echo " You should determine the reason for the failed mount, mount the new" >&2
+ echo " file system and restore the configuration from $saved - it's just a" >&2
+ echo " matter of copying the saved files where required." >&2
+ exit 1
+}
+#
+# verify file
+# this is called with the name of a 'diff' file which is, indeed,
+# different and with all the std streams connected to the tty. It
+# returns a status code to say whether (0) or not (1) to copy the
+# file over.
+#
+verify_help() {
+ echo "Please specify how to handle this file or link, the options are as follows,"
+ echo "two character abbreviations may be used:"
+ echo
+ echo " keep: retain the old file, overwrite the new flash image file"
+ echo " upgrade: retain the new file, the old (saved) file is not used"
+ echo " diff: display the differences between the old and the new using diff -u"
+ echo " shell: temporarily start an interactive shell (sh -i), exit to continue"
+ echo " skip: ignore this file for the moment. The file is left in the directory"
+ echo " $saved and many be handled after this script has completed"
+}
+#
+verify() {
+ local command file
+
+ file="$1"
+ echo "reflash: $file: configuration file changed."
+ verify_help "$file"
+ while :
+ do
+ echo -n "option: "
+ read command
+ case "$command" in
+ ke*) return 0;;
+ up*) rm "$saved/$file"
+ return 1;;
+ di*) echo "DIFF OLD($saved) NEW($ffsdir)"
+ diff -u "$saved/$file" "$ffsdir/$file";;
+ sh*) PS1="$file: " sh -i;;
+ sk*) return 1;;
+ *) verify_help "$file";;
+ esac
+ done
+}
+# the same, but for a link
+verify_link() {
+ local command link
+
+ link="$1"
+ echo "reflash: $link: configuration link changed."
+ verify_help "$link"
+ while :
+ do
+ echo -n "option: "
+ read command
+ case "$command" in
+ ke*) return 0;;
+ up*) rm "$saved/$link"
+ return 1;;
+ di*) echo "DIFF:"
+ echo "OLD($saved): $link -> $(readlink "$saved/$link")"
+ echo "NEW($ffsdir): $link -> $(readlink "$ffsdir/$link")";;
+ sh*) PS1="$link: " sh -i;;
+ sk*) return 1;;
+ *) verify_help "$link";;
+ esac
+ done
+}
+#
+while read op file
+do
+ # handle .configured specially (to preserve the original datestamp)
+ if test "$file" = "etc/.configured"
+ then
+ # this should definately not fail because of the test above!
+ if cp -a "$saved/$file" "$ffsdir/$file"
+ then
+ echo "$file" >&3
+ else
+ echo "reflash: $file: timestamp copy failed (ignored)" >&2
+ fi
+ elif test -h "$saved/file" -o -h "$ffsdir/$file"
+ then
+ # new or old symbolic link
+ if test -h "$saved/$file" -a -h "$ffsdir/$file" &&
+ test "$(readlink "$saved/$file")" = "$(readlink "$ffsdir/$file")"
+ then
+ # no change
+ echo "$file" >&3
+ else
+ # assume a change regardless
+ case "$op" in
+ preserve)
+ echo "$file"
+ echo "$file" >&3;;
+ diff) # need user input
+ if verify_link "$file" <>/dev/tty >&0 2>&0
+ then
+ echo "$file"
+ echo "$file" >&3
+ fi;;
+ esac
+ fi
+ else
+ # only overwrite if necessary
+ if test -e "$ffsdir/$file" && cmp -s "$saved/$file" "$ffsdir/$file"
+ then
+ # do not overwrite
+ echo "$file" >&3
+ elif test ! -e "$ffsdir/$file"
+ then
+ # always preserve
+ echo "$file"
+ echo "$file" >&3
+ else
+ case "$op" in
+ preserve)
+ echo "$file"
+ echo "$file" >&3;;
+ diff) # the files are different, get user input
+ if verify "$file" <>/dev/tty >&0 2>&0
+ then
+ echo "$file"
+ echo "$file" >&3
+ fi;;
+ esac
+ fi
+ fi
+done <"$list" 3>/tmp/restore.$$ | (cd "$saved"; exec cpio -p -d -u "$ffsdir") || {
+ echo "reflash: $saved: restore of saved configuration files failed" >&2
+ echo " The new flash file system is mounted on $ffsdir" >&2
+ echo " The saved files are in $saved and the list in $list, the list of" >&2
+ echo " files selected for restore is in /tmp/restore.$$" >&2
+ echo " You should restore any required configuration from $saved," >&2
+ echo " then umount $ffsdir and reboot." >&2
+ exit 1
+}
+#
+# remove the copied files (i.e. the ones which were preserved)
+( cd "$saved"
+ exec rm $(cat /tmp/restore.$$)
+)
+rm /tmp/restore.$$
+#
+# clean up, files left in $saved need to be handled by the user
+files="$(find "$saved" ! -type d -print)"
+if test -n "$files"
+then
+ echo "reflash: the following saved configuration files remain:" >&2
+ echo "$files" >&2
+ echo "The full list of preserved files is in $list. To alter the" >&2
+ echo "new root file system use the command:" >&2
+ echo "" >&2
+ echo " mount -t jffs2 $ffsdev /mnt" >&2
+ echo "" >&2
+ echo "The saved files are in the temporary directory, they will not" >&2
+ echo "be retained across a system boot. Copy them elsewhere if you" >&2
+ echo "are unsure whether they are needed" >&2
+else
+ rm -rf "$saved"
+ rm "$list"
+fi
+#
+# now the final umount
+if umount "$ffsdir"
+then
+ rmdir "$ffsdir"
+ echo "reflash: system upgrade complete. Reboot to continue." >&2
+ exit 0
+else
+ echo "reflash: $ffsdir: temporary mount point umount failed" >&2
+ echo " ALL changes have been made successfully, however the umount of" >&2
+ echo " the new root file system has failed. You should determine the" >&2
+ echo " cause of the failure, umount $ffsdir, then reboot the system (this" >&2
+ echo " will use the upgraded kernel and root file system)" >&2
+ exit 1
+fi
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 04:56:52 +0000