diff options
Diffstat (limited to 'packages/obsolete/nslu2/nslu2-kernel/2.6.14')
19 files changed, 4738 insertions, 0 deletions
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch new file mode 100644 index 0000000000..f3da2e093f --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch @@ -0,0 +1,73 @@ +--- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700 ++++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700 +@@ -38,10 +38,14 @@ + #define BYTE1(h) ((h) & 0xFF) + #endif + ++#define FLASHWORD(a) (*(__u16*)(a)) ++#define FLASHVAL(a) FLASHWORD(a) ++#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0) ++ + static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) + { + map_word val; +- val.x[0] = *(__u16 *) (map->map_priv_1 + ofs); ++ val.x[0] = FLASHVAL(map->map_priv_1 + ofs); + return val; + } + +@@ -53,19 +57,25 @@ static map_word ixp4xx_read16(struct map + static void ixp4xx_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) + { +- int i; +- u8 *dest = (u8 *) to; +- u16 *src = (u16 *) (map->map_priv_1 + from); +- u16 data; +- +- for (i = 0; i < (len / 2); i++) { +- data = src[i]; +- dest[i * 2] = BYTE0(data); +- dest[i * 2 + 1] = BYTE1(data); ++ u8 *dest, *src; ++ ++ if (len <= 0) ++ return; ++ ++ dest = (u8 *) to; ++ src = (u8 *) (map->map_priv_1 + from); ++ if (from & 1) ++ *dest++ = BYTE1(FLASHVAL(src-1)), ++src, --len; ++ ++ while (len >= 2) { ++ u16 data = FLASHVAL(src); src += 2; ++ *dest++ = BYTE0(data); ++ *dest++ = BYTE1(data); ++ len -= 2; + } + +- if (len & 1) +- dest[len - 1] = BYTE0(src[i]); ++ if (len > 0) ++ *dest++ = BYTE0(FLASHVAL(src)); + } + + /* +@@ -75,7 +85,7 @@ static void ixp4xx_copy_from(struct map_ + static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) + { + if (!(adr & 1)) +- *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; ++ FLASHSET(map->map_priv_1 + adr, d.x[0]); + } + + /* +@@ -83,7 +93,7 @@ static void ixp4xx_probe_write16(struct + */ + static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) + { +- *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; ++ FLASHSET(map->map_priv_1 + adr, d.x[0]); + } + + struct ixp4xx_flash_info { diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch new file mode 100644 index 0000000000..0b50e4e1a0 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch @@ -0,0 +1,54 @@ +--- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700 ++++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700 +@@ -22,6 +22,7 @@ + #include <linux/string.h> + #include <linux/mtd/mtd.h> + #include <linux/mtd/map.h> ++#include <linux/mtd/cfi_endian.h> + #include <linux/mtd/partitions.h> + #include <linux/ioport.h> + #include <linux/device.h> +@@ -30,17 +31,40 @@ + + #include <linux/reboot.h> + ++/* On a little-endian IXP4XX system (tested on NSLU2) an LDRH or STRH ++ * will flip the second address bit - i.e. XOR the address with 10b. ++ * This causes the cfi commands (sent to the command address, 0xAA for ++ * 16 bit flash) to fail. This is fixed here by XOR'ing the address ++ * before use with 10b. The cost of this is that the flash layout ends ++ * up with pdp-endiannes (on an LE system), however this is not a problem ++ * as the access code consistently only accesses half words - so the ++ * endianness is not determinable on stuff which is written and read ++ * consistently in the little endian world. ++ * ++ * For flash data from the big-endian world, however, the results are ++ * weird - the pdp-endianness results in the data apparently being ++ * 2-byte swapped (as in dd conv=swab). To work round this the 16 ++ * bit values are written and read using cpu_to_cfi16 and cfi16_to_cpu, ++ * by default these are no-ops, but if the MTD driver is configed with ++ * CONFIG_MTD_CFI_BE_BYTE_SWAP the macros will byte swap the data, ++ * resulting in a consistently BE view of the flash on both BE (no ++ * op) and LE systems. This config setting also causes the command ++ * data from the CFI implementation to get swapped - as is required ++ * so that this code will *unswap* it and give the correct command ++ * data to the flash. ++ */ + #ifndef __ARMEB__ + #define BYTE0(h) ((h) & 0xFF) + #define BYTE1(h) (((h) >> 8) & 0xFF) ++#define FLASHWORD(a) (*(__u16*)((u32)(a) ^ 2)) + #else + #define BYTE0(h) (((h) >> 8) & 0xFF) + #define BYTE1(h) ((h) & 0xFF) ++#define FLASHWORD(a) (*(__u16*)(a)) + #endif + +-#define FLASHWORD(a) (*(__u16*)(a)) +-#define FLASHVAL(a) FLASHWORD(a) +-#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0) ++#define FLASHVAL(a) cfi16_to_cpu(FLASHWORD(a)) ++#define FLASHSET(a,v) (FLASHWORD(a) = cpu_to_cfi16(v)) + + static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) + { diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch new file mode 100644 index 0000000000..3fa0535abf --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch @@ -0,0 +1,70 @@ +drivers/mtd/redboot.c: recognise a foreign byte sex partition table + +The RedBoot boot loader writes flash partition tables containing native +byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an +LE kernel from BE RedBoot) the current MTD driver fails to handle the +partition table and therefore is unable to generate the correct partition +map for the flash. + +The patch recognises that the FIS directory (the partition table) is +byte-reversed by examining the partition table size, which is known to be +one erase block (this is an assumption made elsewhere in redboot.c). If +the size matches the erase block after byte swapping the value then +byte-reversal is assumed, if not no further action is taken. The patched +code is fail safe; should redboot.c be changed to support a partition table +with a modified size field the test will fail and the partition table will +be assumed to have the host byte sex. + +If byte-reversal is detected the patch byte swaps the remainder of the 32 +bit fields in the copy of the table; this copy is then used to set up the +MTD partition map. + +Signed-off-by: John Bowler <jbowler@acm.org> +Signed-off-by: Andrew Morton <akpm@osdl.org> +Modified slightly and +Signed-off-by: David Woodhouse <dwmw2@infradead.org> + +Index: drivers/mtd/redboot.c +=================================================================== +RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v +retrieving revision 1.18 +retrieving revision 1.19 +diff -u -p -r1.18 -r1.19 +--- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000 +@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru + i = numslots; + break; + } +- if (!memcmp(buf[i].name, "FIS directory", 14)) ++ if (!memcmp(buf[i].name, "FIS directory", 14)) { ++ /* This is apparently the FIS directory entry for the ++ * FIS directory itself. The FIS directory size is ++ * one erase block; if the buf[i].size field is ++ * swab32(erasesize) then we know we are looking at ++ * a byte swapped FIS directory - swap all the entries! ++ * (NOTE: this is 'size' not 'data_length'; size is ++ * the full size of the entry.) ++ */ ++ if (swab32(buf[i].size) == master->erasesize) { ++ int j; ++ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) { ++ /* The unsigned long fields were written with the ++ * wrong byte sex, name and pad have no byte sex. ++ */ ++ swab32s(&buf[j].flash_base); ++ swab32s(&buf[j].mem_base); ++ swab32s(&buf[j].size); ++ swab32s(&buf[j].entry_point); ++ swab32s(&buf[j].data_length); ++ swab32s(&buf[j].desc_cksum); ++ swab32s(&buf[j].file_cksum); ++ } ++ } + break; ++ } + } + if (i == numslots) { + /* Didn't find it */ + + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch new file mode 100644 index 0000000000..6ac0807f1e --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch @@ -0,0 +1,31 @@ +# The inline caller of these APIs were changed to have +# const vaddr parameters... +--- linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h.orig 2005-09-24 17:06:19.968099976 -0700 ++++ linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h 2005-09-24 17:06:52.542149731 -0700 +@@ -113,7 +113,7 @@ + } + + static inline void +-__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count) ++__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count) + { + while (count--) + writeb(*vaddr++, bus_addr); +@@ -136,7 +136,7 @@ + } + + static inline void +-__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count) ++__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count) + { + while (count--) + writew(*vaddr++, bus_addr); +@@ -154,7 +154,7 @@ + } + + static inline void +-__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count) ++__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count) + { + while (count--) + writel(*vaddr++, bus_addr); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch new file mode 100644 index 0000000000..5813bbb7ac --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch @@ -0,0 +1,287 @@ +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:33:21.757679882 -0700 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:47:02.581331058 -0700 +@@ -80,9 +80,9 @@ __ixp4xx_iounmap(void __iomem *addr) + #define __arch_ioremap(a, s, f, x) __ixp4xx_ioremap(a, s, f, x) + #define __arch_iounmap(a) __ixp4xx_iounmap(a) + +-#define writeb(p, v) __ixp4xx_writeb(p, v) +-#define writew(p, v) __ixp4xx_writew(p, v) +-#define writel(p, v) __ixp4xx_writel(p, v) ++#define writeb(v, p) __ixp4xx_writeb(v, p) ++#define writew(v, p) __ixp4xx_writew(v, p) ++#define writel(v, p) __ixp4xx_writel(v, p) + + #define writesb(p, v, l) __ixp4xx_writesb(p, v, l) + #define writesw(p, v, l) __ixp4xx_writesw(p, v, l) +@@ -97,8 +97,9 @@ __ixp4xx_iounmap(void __iomem *addr) + #define readsl(p, v, l) __ixp4xx_readsl(p, v, l) + + static inline void +-__ixp4xx_writeb(u8 value, u32 addr) ++__ixp4xx_writeb(u8 value, volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (addr >= VMALLOC_START) { +@@ -113,15 +114,16 @@ __ixp4xx_writeb(u8 value, u32 addr) + } + + static inline void +-__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count) ++__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count) + { + while (count--) + writeb(*vaddr++, bus_addr); + } + + static inline void +-__ixp4xx_writew(u16 value, u32 addr) ++__ixp4xx_writew(u16 value, volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (addr >= VMALLOC_START) { +@@ -136,15 +138,16 @@ __ixp4xx_writew(u16 value, u32 addr) + } + + static inline void +-__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count) ++__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count) + { + while (count--) + writew(*vaddr++, bus_addr); + } + + static inline void +-__ixp4xx_writel(u32 value, u32 addr) ++__ixp4xx_writel(u32 value, volatile void __iomem *p) + { ++ u32 addr = (u32)p; + if (addr >= VMALLOC_START) { + __raw_writel(value, addr); + return; +@@ -154,15 +157,16 @@ __ixp4xx_writel(u32 value, u32 addr) + } + + static inline void +-__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count) ++__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count) + { + while (count--) + writel(*vaddr++, bus_addr); + } + + static inline unsigned char +-__ixp4xx_readb(u32 addr) ++__ixp4xx_readb(const volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (addr >= VMALLOC_START) +@@ -177,15 +181,16 @@ __ixp4xx_readb(u32 addr) + } + + static inline void +-__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count) ++__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count) + { + while (count--) + *vaddr++ = readb(bus_addr); + } + + static inline unsigned short +-__ixp4xx_readw(u32 addr) ++__ixp4xx_readw(const volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (addr >= VMALLOC_START) +@@ -200,15 +205,16 @@ __ixp4xx_readw(u32 addr) + } + + static inline void +-__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count) ++__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count) + { + while (count--) + *vaddr++ = readw(bus_addr); + } + + static inline unsigned long +-__ixp4xx_readl(u32 addr) ++__ixp4xx_readl(const volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 data; + + if (addr >= VMALLOC_START) +@@ -221,7 +227,7 @@ __ixp4xx_readl(u32 addr) + } + + static inline void +-__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count) ++__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) + { + while (count--) + *vaddr++ = readl(bus_addr); +@@ -239,7 +245,7 @@ __ixp4xx_readsl(u32 bus_addr, u32 *vaddr + eth_copy_and_sum((s),__mem_pci(c),(l),(b)) + + static inline int +-check_signature(unsigned long bus_addr, const unsigned char *signature, ++check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature, + int length) + { + int retval = 0; +@@ -389,7 +395,7 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u + #define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ + ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) + static inline unsigned int +-__ixp4xx_ioread8(void __iomem *addr) ++__ixp4xx_ioread8(const void __iomem *addr) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -398,12 +404,12 @@ __ixp4xx_ioread8(void __iomem *addr) + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + return (unsigned int)__raw_readb(port); + #else +- return (unsigned int)__ixp4xx_readb(port); ++ return (unsigned int)__ixp4xx_readb(addr); + #endif + } + + static inline void +-__ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count) ++__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -412,12 +418,12 @@ __ixp4xx_ioread8_rep(void __iomem *addr, + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsb(addr, vaddr, count); + #else +- __ixp4xx_readsb(port, vaddr, count); ++ __ixp4xx_readsb(addr, vaddr, count); + #endif + } + + static inline unsigned int +-__ixp4xx_ioread16(void __iomem *addr) ++__ixp4xx_ioread16(const void __iomem *addr) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -426,12 +432,12 @@ __ixp4xx_ioread16(void __iomem *addr) + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le16_to_cpu(__raw_readw((u32)port)); + #else +- return (unsigned int)__ixp4xx_readw((u32)port); ++ return (unsigned int)__ixp4xx_readw(addr); + #endif + } + + static inline void +-__ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count) ++__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -440,12 +446,12 @@ __ixp4xx_ioread16_rep(void __iomem *addr + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsw(addr, vaddr, count); + #else +- __ixp4xx_readsw(port, vaddr, count); ++ __ixp4xx_readsw(addr, vaddr, count); + #endif + } + + static inline unsigned int +-__ixp4xx_ioread32(void __iomem *addr) ++__ixp4xx_ioread32(const void __iomem *addr) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -454,13 +460,13 @@ __ixp4xx_ioread32(void __iomem *addr) + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le32_to_cpu(__raw_readl((u32)port)); + #else +- return (unsigned int)__ixp4xx_readl((u32)port); ++ return (unsigned int)__ixp4xx_readl(addr); + #endif + } + } + + static inline void +-__ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count) ++__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -469,7 +475,7 @@ __ixp4xx_ioread32_rep(void __iomem *addr + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsl(addr, vaddr, count); + #else +- __ixp4xx_readsl(port, vaddr, count); ++ __ixp4xx_readsl(addr, vaddr, count); + #endif + } + +@@ -483,7 +489,7 @@ __ixp4xx_iowrite8(u8 value, void __iomem + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writeb(value, port); + #else +- __ixp4xx_writeb(value, port); ++ __ixp4xx_writeb(value, addr); + #endif + } + +@@ -497,7 +503,7 @@ __ixp4xx_iowrite8_rep(void __iomem *addr + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesb(addr, vaddr, count); + #else +- __ixp4xx_writesb(port, vaddr, count); ++ __ixp4xx_writesb(addr, vaddr, count); + #endif + } + +@@ -511,7 +517,7 @@ __ixp4xx_iowrite16(u16 value, void __iom + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writew(cpu_to_le16(value), addr); + #else +- __ixp4xx_writew(value, port); ++ __ixp4xx_writew(value, addr); + #endif + } + +@@ -525,7 +531,7 @@ __ixp4xx_iowrite16_rep(void __iomem *add + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesw(addr, vaddr, count); + #else +- __ixp4xx_writesw(port, vaddr, count); ++ __ixp4xx_writesw(addr, vaddr, count); + #endif + } + +@@ -539,7 +545,7 @@ __ixp4xx_iowrite32(u32 value, void __iom + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writel(cpu_to_le32(value), port); + #else +- __ixp4xx_writel(value, port); ++ __ixp4xx_writel(value, addr); + #endif + } + +@@ -553,7 +559,7 @@ __ixp4xx_iowrite32_rep(void __iomem *add + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesl(addr, vaddr, count); + #else +- __ixp4xx_writesl(port, vaddr, count); ++ __ixp4xx_writesl(addr, vaddr, count); + #endif + } + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch new file mode 100644 index 0000000000..4406d17857 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch @@ -0,0 +1,13 @@ +--- linux-2.6.14.1/fs/jffs2/nodelist.h.orig 2005-11-09 23:12:29.641449728 -0800 ++++ linux-2.6.14.1/fs/jffs2/nodelist.h 2005-11-09 23:13:19.228570049 -0800 +@@ -44,7 +44,9 @@ + #define D2(x) + #endif + +-#define JFFS2_NATIVE_ENDIAN ++#undef JFFS2_NATIVE_ENDIAN ++#define JFFS2_BIG_ENDIAN 1 ++#undef JFFS2_LITTLE_ENDIAN + + /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from + whatever OS we're actually running on here too. */ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch new file mode 100644 index 0000000000..3d4a03f616 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch @@ -0,0 +1,285 @@ +--- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000 +@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void) + * IXP4xx timer tick + * We use OS timer1 on the CPU for the timer tick and the timestamp + * counter as a source of real clock ticks to account for missed jiffies. ++ * ++ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second, ++ * this is significantly greater than the actual number on any ixp4xx ++ * board. Neither this nor 'LATCH' are required by this code because ++ * the only requirement is to generate HZ timer_tick calls per second. + *************************************************************************/ ++#if TICK_NSEC * HZ != 1000000000 ++ /* This will cause the jiffies to drift unnecessarily. */ ++# error CLOCK_TICK_RATE should be a multiple of HZ for this code ++#endif ++ ++/* These are the control registers for the interrupt handler, they must ++ * only be read and written by the interrupt handler and by the init ++ * method (which sets them to 0). ++ */ ++static volatile u32 last_timer_time; ++static volatile int accumulated_error; ++ ++/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset ++ * this from the board level code if required. The following variables ++ * must be *written* only by set_board_tick_rate ++ */ ++static u32 board_tick_rate; ++static u32 board_tick_per_1000; /* board_tick_rate/1000 */ ++static u32 timer_count; ++ ++/* The following symbol may be written to change the current tick rate, ++ * it is read by the interrupt handler and used to reload the timer. ++ * The 'real' value (the one in use) is 'board_tick_rate' above. ++ * NOTE: this can be tweaked to match the actual crystal on a particular ++ * machine. ++ */ ++volatile u32 ixp4xx_board_tick_rate = 66666600; ++EXPORT_SYMBOL(ixp4xx_board_tick_rate); ++ ++/* The set API may run asynchronously in the presence of interrupts, ++ * everything it does it is both atomic and complete (notice that it ++ * doesn't change any of the 'volatile' values). The mathematics in ++ * here require the following values. Changing the board tick rate ++ * implies an unknown error in the current timestamp tick count. ++ */ ++#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1 ++# error unexpected value for timer reload mask ++#endif ++static void set_board_tick_rate(u32 rate) { ++ u32 reload; ++ ++ /* Store the two effectively informational rate values, the ++ * error calculation is (rate - count*HZ) (above), and rate ++ * is changed first, this can cause a temporary error which ++ * will be corrected on the next interrupt. ++ */ ++ board_tick_rate = rate; ++ board_tick_per_1000 = (rate+500)/1000; ++ ++ /* Calculate the correct value to load into the timer countdown ++ * register, the low two bits must be b01 (to enable the timer). ++ * Select the top bits to be as close to the desired value as ++ * possible. ++ * ++ * First find the best value, regardless of the low two bits - ++ * this is the value used in the interrupt calculation even though ++ * it cannot necessarily be set into the register. ++ */ ++ timer_count = (rate + (HZ/2))/HZ; ++ ++ /* Now the timer_ticks are being generated at this rate, calculate ++ * an appropriate value for the register. This stores a 30 bit ++ * value which gives a period of 4*x+1, we want: ++ * ++ * 4*x+1 = board_tick_rate/HZ ++ * ++ * This needs to be rounded to the closest 4*HZ value: ++ * ++ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ ++ * x = (board_tick_rate+HZ) / (4*HZ); ++ */ ++ reload = (board_tick_rate + HZ) / HZ; ++ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ *IXP4XX_OSRT1 = reload; + +-static unsigned volatile last_jiffy_time; ++ /* If the clock is drifing, look in syslog: */ ++ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload); ++} + +-#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) ++/* This returns the time in timer ticks since the 'last_timer_time' ++ * recorded above. Use this to avoid arithmetic errors because of ++ * the overflow when the timer wraps. ++ */ ++static inline u32 ixp4xx_timer_delta(void) ++{ ++ return *IXP4XX_OSTS - last_timer_time; ++} + + /* IRQs are disabled before entering here from do_gettimeofday() */ + static unsigned long ixp4xx_gettimeoffset(void) + { +- u32 elapsed; +- +- elapsed = *IXP4XX_OSTS - last_jiffy_time; ++ /* Return the offset of the current time from the last time ++ * timer tick in microseconds. This is only used for the ++ * gettimeofday call. ++ * ++ * The result of this API is at most about 20000 (for a 50Hz ++ * HZ - 20000 uS/tick), the input delta is at most about ++ * 1.3M - 21 bits. ++ */ ++ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */ ++ /* return delta * 1000000 / board_tick_rate; */ ++ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000; ++} + +- return elapsed / CLOCK_TICKS_PER_USEC; ++/* This is the correct adjustment to the counter to compensate for an ++ * error iff timer_count-1 <= exact_count <= timer_count+1 ++ */ ++static inline int adjustment(int error) { ++ if (error >= HZ) ++ return 1; ++ else if (error <= -HZ) ++ return -1; ++ return 0; + } + + static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) + { ++ u32 rate; ++ u32 count; ++ int error; ++ + write_seqlock(&xtime_lock); + + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; + ++ /* If the board tick rate has been changed update the cached ++ * value. ++ */ ++ if (ixp4xx_board_tick_rate != board_tick_rate) { ++ set_board_tick_rate(ixp4xx_board_tick_rate); ++ accumulated_error = 0; ++ } ++ + /* + * Catch up with the real idea of time ++ * ++ * board_tick_rate: actual ixp4xx ticks/second, read-only ++ * accumulated_error: aggregate error/tick * HZ, read/write ++ * timer_count: best ixp4xx ticks per timer_tick, read-only + */ +- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) { ++ rate = board_tick_rate; ++ error = accumulated_error; ++ count = timer_count; ++ do { ++ u32 adjusted_count = count + adjustment(error); ++ if (ixp4xx_timer_delta() < adjusted_count) ++ break; + timer_tick(regs); +- last_jiffy_time += LATCH; +- } ++ last_timer_time += adjusted_count; ++ error += rate - adjusted_count*HZ; ++ } while (1); ++ accumulated_error = error; + + write_sequnlock(&xtime_lock); + +@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq + .handler = ixp4xx_timer_interrupt, + }; + ++u32 ixp4xx_get_board_tick_rate(void) { ++ return board_tick_rate; ++} ++ ++EXPORT_SYMBOL(ixp4xx_get_board_tick_rate); ++ ++void ixp4xx_set_board_tick_rate(u32 rate) { ++ ixp4xx_board_tick_rate = rate; ++} ++ ++EXPORT_SYMBOL(ixp4xx_set_board_tick_rate); ++ + static void __init ixp4xx_timer_init(void) + { + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; + + /* Setup the Timer counter value */ +- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ set_board_tick_rate(ixp4xx_board_tick_rate); + + /* Reset time-stamp counter */ + *IXP4XX_OSTS = 0; +- last_jiffy_time = 0; ++ last_timer_time = 0; ++ accumulated_error = 0; + + /* Connect the interrupt handler and enable the interrupt */ + setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); +@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void) + ARRAY_SIZE(ixp46x_devices)); + } + } +- +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 +@@ -119,6 +119,11 @@ static void nslu2_power_off(void) + + static void __init nslu2_init(void) + { ++ /* The NSLU2 has a 33MHz crystal on board - 1.01% different ++ * from the typical value. ++ */ ++ ixp4xx_set_board_tick_rate(66000000); ++ + ixp4xx_sys_init(); + + pm_power_off = nslu2_power_off; +--- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 +@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input + } + + if (value > 20 && value < 32767) +- count = (NSLU2_FREQ / (value*4)) - 1; ++ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1; + + spin_lock_irqsave(&beep_lock, flags); + +--- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 +@@ -38,11 +38,6 @@ + #define NSLU2_PCI_INTD_PIN 8 + + +-/* NSLU2 Timer */ +-#define NSLU2_FREQ 66000000 +-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) +- + /* GPIO */ + + #define NSLU2_GPIO0 0 +--- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000 +@@ -6,10 +6,23 @@ + #include <asm/hardware.h> + + /* +- * We use IXP425 General purpose timer for our timer needs, it runs at +- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the +- * timer register ignores the bottom 2 bits of the LATCH value. ++ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and ++ * is the number of internal counts per timer interrupt. Thus ++ * CLOCK_TICK_RATE is LATCH*HZ. ++ * ++ * The actual values of these numbers do not matter, because they ++ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed ++ * point number), so the value here gives a LATCH of 1 and pretty ++ * much guarantees to flush out any off-by-one errors. ++ * ++ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of ++ * HZ, this is checked in the ixp4xx/common.c code. + */ +-#define FREQ 66666666 +-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) ++#define CLOCK_TICK_RATE HZ + ++/* The following allow the exact board tick rate to be set and ++ * discovered. The value should be exactly twice the frequency ++ * (in Hz) of the onboard crystal. ++ */ ++extern u32 ixp4xx_get_board_tick_rate(void); ++extern void ixp4xx_set_board_tick_rate(u32 new_rate); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch new file mode 100644 index 0000000000..3ae5178cff --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch @@ -0,0 +1,32 @@ +--- linux-2.6.14-rc5/include/linux/spinlock_up.h 2005-10-26 08:37:20.164248408 -0700 ++++ patched/include/linux/spinlock_up.h 2005-10-26 12:15:13.458898975 -0700 +@@ -47,6 +47,14 @@ static inline void __raw_spin_unlock(raw + lock->slock = 1; + } + ++#else /* DEBUG_SPINLOCK */ ++#define __raw_spin_is_locked(lock) ((void)(lock), 0) ++/* for sched.c and kernel_lock.c: */ ++# define __raw_spin_lock(lock) do { (void)(lock); } while (0) ++# define __raw_spin_unlock(lock) do { (void)(lock); } while (0) ++# define __raw_spin_trylock(lock) ({ (void)(lock); 1; }) ++#endif /* DEBUG_SPINLOCK */ ++ + /* + * Read-write spinlocks. No debug version. + */ +@@ -57,14 +65,6 @@ static inline void __raw_spin_unlock(raw + #define __raw_read_unlock(lock) do { (void)(lock); } while (0) + #define __raw_write_unlock(lock) do { (void)(lock); } while (0) + +-#else /* DEBUG_SPINLOCK */ +-#define __raw_spin_is_locked(lock) ((void)(lock), 0) +-/* for sched.c and kernel_lock.c: */ +-# define __raw_spin_lock(lock) do { (void)(lock); } while (0) +-# define __raw_spin_unlock(lock) do { (void)(lock); } while (0) +-# define __raw_spin_trylock(lock) ({ (void)(lock); 1; }) +-#endif /* DEBUG_SPINLOCK */ +- + #define __raw_read_can_lock(lock) (((void)(lock), 1)) + #define __raw_write_can_lock(lock) (((void)(lock), 1)) + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch new file mode 100644 index 0000000000..93e070518c --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch @@ -0,0 +1,11 @@ +--- linux-2.6.14-rc5/net/ipv4/route.c 2005-10-26 08:37:20.752285410 -0700 ++++ patched/net/ipv4/route.c 2005-10-26 12:17:00.761651111 -0700 +@@ -231,7 +231,7 @@ static spinlock_t *rt_hash_locks; + spin_lock_init(&rt_hash_locks[i]); \ + } + #else +-# define rt_hash_lock_addr(slot) NULL ++# define rt_hash_lock_addr(slot) ((spinlock_t*)NULL) + # define rt_hash_lock_init() + #endif + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch new file mode 100644 index 0000000000..1e775ba8b8 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch @@ -0,0 +1,714 @@ +diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Kconfig test9/drivers/i2c/chips/Kconfig +--- linux-2.6.14-rc3/drivers/i2c/chips/Kconfig 2005-10-01 13:46:50.000000000 +0200 ++++ test9/drivers/i2c/chips/Kconfig 2005-10-03 16:10:22.000000000 +0200 +@@ -126,4 +126,13 @@ + This driver can also be built as a module. If so, the module + will be called max6875. + ++config SENSORS_X1205 ++ tristate "Xicor X1205 RTC chip" ++ depends on I2C ++ help ++ If you say yes here you get support for the Xicor X1205 RTC chip. ++ ++ This driver can also be built as a module. If so, the module ++ will be called x1205 ++ + endmenu +diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Makefile test9/drivers/i2c/chips/Makefile +--- linux-2.6.14-rc3/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200 ++++ test9/drivers/i2c/chips/Makefile 2005-10-01 15:30:06.000000000 +0200 +@@ -13,6 +13,7 @@ + obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o + obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + obj-$(CONFIG_TPS65010) += tps65010.o ++obj-$(CONFIG_SENSORS_X1205) += x1205.o + + ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) + EXTRA_CFLAGS += -DDEBUG +diff -urN linux-2.6.14-rc3/drivers/i2c/chips/x1205.c test9/drivers/i2c/chips/x1205.c +--- linux-2.6.14-rc3/drivers/i2c/chips/x1205.c 1970-01-01 01:00:00.000000000 +0100 ++++ test9/drivers/i2c/chips/x1205.c 2005-10-03 16:02:57.000000000 +0200 +@@ -0,0 +1,612 @@ ++/* ++ * linux/drivers/i2c/chips/x1205.c ++ * ++ * x1205.c - An 12c driver for the Xicor X1205 RTC ++ * Copyright 2004 Karen Spearel ++ * Copyright 2005 Alessandro Zummo ++ * ++ * please send all reports to: ++ * kas11 at tampabay dot rr dot com ++ * a dot zummo at towertech dot it ++ * ++ * based on the other drivers in this same directory. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/i2c.h> ++#include <linux/string.h> ++#include <linux/bcd.h> ++#include <linux/rtc.h> ++#include <linux/list.h> ++ ++#include <linux/x1205.h> ++ ++#define EPOCH_1900 1900 ++#define EPOCH_1970 1970 ++ ++#define DRIVER_VERSION "0.9.6" ++#define DRIVER_NAME (x1205_driver.name) ++ ++ ++/* Addresses to scan */ ++static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END }; ++ ++/* Insmod parameters */ ++I2C_CLIENT_INSMOD; ++I2C_CLIENT_MODULE_PARM(hctosys, ++ "Set the system time from the hardware clock upon initialization"); ++ ++/* Prototypes */ ++ ++static int x1205_attach(struct i2c_adapter *adapter); ++static int x1205_detach(struct i2c_client *client); ++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); ++static int x1205_validate_client(struct i2c_client *client); ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ u8 reg_base); ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base); ++static int x1205_validate_tm(struct rtc_time *tm); ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); ++static int x1205_hctosys(struct i2c_client *client); ++ ++ ++static struct i2c_driver x1205_driver = { ++ .owner = THIS_MODULE, ++ .name = "x1205", ++ .flags = I2C_DF_NOTIFY, ++ .attach_adapter = &x1205_attach, ++ .detach_client = &x1205_detach, ++/* .command = &x1205_command,*/ ++}; ++ ++struct x1205_data { ++ struct i2c_client client; ++ struct list_head list; ++ unsigned int epoch; ++}; ++ ++ ++static const unsigned char days_in_mo[] = ++{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; ++ ++static LIST_HEAD(x1205_clients); ++ ++/* Workaround until the I2C subsytem will allow to send ++ * commands to a specific client. This function will send the command ++ * to the first client. ++ */ ++ ++int x1205_do_command(unsigned int cmd, void *arg) ++{ ++ struct list_head *walk; ++ struct list_head *tmp; ++ struct x1205_data *data; ++ ++ list_for_each_safe(walk, tmp, &x1205_clients) { ++ data = list_entry(walk, struct x1205_data, list); ++ return x1205_command(&data->client, cmd, arg); ++ } ++ ++ return -ENODEV; ++} ++ ++ ++/* ++ * in the routines that deal directly with the x1205 hardware, we use ++ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch ++ * Epoch is inited as 2000. Time is set to UT ++ */ ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ u8 reg_base) ++{ ++ static unsigned char dt_addr[] = { 0, }; ++ static unsigned char sr_addr[] = { 0, }; ++ ++ unsigned char buf[8], sr; ++ ++ struct i2c_msg msgs[] = { ++ { client->addr, 0, 2, sr_addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &sr }, ++ { client->addr, 0, 2, dt_addr }, /* random read */ ++ { client->addr, I2C_M_RD, 8, buf }, ++ }; ++ ++ struct x1205_data *xdata = i2c_get_clientdata(client); ++ ++ dt_addr[1] = reg_base; ++ sr_addr[1] = X1205_REG_SR; ++ ++ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) == ++ ARRAY_SIZE(msgs)) { ++ /* did we read the correct number of messages? */ ++ ++ /* check for battery failure */ ++ if (sr & X1205_SR_RTCF) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Clock had a power failure, you must set the date.\n", ++ DRIVER_NAME); ++ ++ return -EINVAL; ++ } ++ ++ dev_dbg(&client->dev, ++ "%s: raw read data - sec-%02x min-%02x hr-%02x" ++ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", ++ __FUNCTION__, ++ buf[0], buf[1], buf[2], buf[3], ++ buf[4], buf[5], buf[6], buf[7]); ++ ++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); ++ tm->tm_min = BCD2BIN(buf[CCR_MIN]); ++ buf[CCR_HOUR] &= ~X1205_HR_MIL; ++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */ ++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); ++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); ++ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; ++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900; ++ tm->tm_wday = buf[CCR_WDAY]; ++ ++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ } else { ++ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++ ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base) ++{ ++ int i, err, xfer; ++ ++ static unsigned char wel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL }; ++ ++ ++ static unsigned char rwel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL | X1205_SR_RWEL }; ++ ++ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; ++ ++ static unsigned char data[3] = { 0, }; ++ static unsigned char buf[8]; ++ ++ struct x1205_data *xdata = i2c_get_clientdata(client); ++ ++ if ((err = x1205_validate_tm(tm)) < 0) ++ return err; ++ ++ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ ++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); ++ buf[CCR_MIN] = BIN2BCD(tm->tm_min); ++ ++ /* Set 24HR format */ ++ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; ++ ++ if (datetoo == X1205_DATETOO) { ++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); ++ ++ /* month, 0 - 11 */ ++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */ ++ ++ /* year, since 1900 */ ++ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch)); ++ buf[CCR_WDAY] = tm->tm_wday & 7; ++ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100); ++ } ++ ++ xfer = i2c_master_send(client, wel, 3); ++ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ xfer = i2c_master_send(client, rwel, 3); ++ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ for (i = 0; i < 8; i++) { ++ data[1] = i + reg_base; ++ data[2] = buf[i]; ++ xfer = i2c_master_send(client, data, 3); ++ ++ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n", ++ __FUNCTION__, ++ xfer, data[1], data[2]); ++ ++ if (xfer != 3) ++ return -EIO; ++ }; ++ ++ xfer = i2c_master_send(client, diswe, 3); ++ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ return 0; ++} ++ ++static int x1205_hctosys(struct i2c_client *client) ++{ ++ int err; ++ ++ struct rtc_time tm; ++ struct timespec tv; ++ ++ ++ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); ++ ++ if (err) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Unable to set the system clock\n", ++ DRIVER_NAME); ++ ++ return err; ++ ++ } ++ ++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether ++ * it stores the most close value or the value with partial seconds ++ * truncated, however it is important for x1205_sync_rtc that it be ++ * defined to store the truncated value. This is because otherwise it ++ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the ++ * sync function, and atomic reads of >32bits on ARM are not possible. ++ * So storing the most close value would slow down the sync API. So ++ * Here we have the truncated value and the best guess is to add 0.5s ++ */ ++ ++ tv.tv_nsec = NSEC_PER_SEC >> 1; ++ ++ /* WARNING: this is not the C library 'mktime' call, it is a built in ++ * inline function from include/linux/time.h. It expects (requires) ++ * the month to be in the range 1-12 ++ */ ++ ++ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1, ++ tm.tm_mday, tm.tm_hour, ++ tm.tm_min, tm.tm_sec); ++ ++ do_settimeofday(&tv); ++ ++ dev_info(&client->adapter->dev, ++ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n", ++ DRIVER_NAME, ++ tm.tm_year + EPOCH_1900, tm.tm_mon + 1, ++ tm.tm_mday, tm.tm_hour, tm.tm_min, ++ tm.tm_sec); ++ ++ return 0; ++} ++ ++struct x1205_limit ++{ ++ unsigned char reg; ++ unsigned char mask; ++ unsigned char min; ++ unsigned char max; ++}; ++ ++static int x1205_validate_client(struct i2c_client *client) ++{ ++ int i, xfer; ++ ++ /* Probe array. We will read the register at the specified ++ * address and check if the given bits are zero. ++ */ ++ ++ const unsigned char probe_zero_pattern[] = { ++ ++ X1205_REG_SR, 0x18, ++ X1205_REG_Y2K, 0xC6, ++ X1205_REG_DW, 0xF8, ++ X1205_REG_MO, 0xE0, ++ X1205_REG_DT, 0xC0, ++ X1205_REG_HR, 0x40, ++ X1205_REG_MN, 0x80, ++ X1205_REG_SC, 0x80, ++ X1205_REG_DTR, 0xF8, ++ X1205_REG_ATR, 0xC0, ++ X1205_REG_INT, 0x18, ++ X1205_REG_0, 0xFF, ++ X1205_REG_Y2K1, 0xC6, ++ X1205_REG_DWA1, 0x78, ++ X1205_REG_MOA1, 0x60, ++ X1205_REG_DTA1, 0x40, ++ X1205_REG_HRA1, 0x40, ++ X1205_REG_Y2K0, 0xC6, ++ X1205_REG_DWA0, 0x78, ++ X1205_REG_MOA0, 0x60, ++ X1205_REG_DTA0, 0x40, ++ X1205_REG_HRA0, 0x40, ++ }; ++ ++ const struct x1205_limit probe_limits_pattern[] = { ++ /* register, mask, min, max */ ++ { X1205_REG_Y2K, 0xFF, 19, 20 }, ++ { X1205_REG_DW, 0xFF, 0, 6 }, ++ { X1205_REG_YR, 0xFF, 0, 99 }, ++ { X1205_REG_MO, 0xFF, 0, 12 }, ++ { X1205_REG_DT, 0xFF, 0, 31 }, ++ { X1205_REG_HR, 0x7F, 0, 23 }, ++ { X1205_REG_MN, 0xFF, 0, 59 }, ++ { X1205_REG_SC, 0xFF, 0, 59 }, ++ { X1205_REG_Y2K1, 0xFF, 19, 20 }, ++ { X1205_REG_DWA1, 0x7F, 0, 6 }, ++ { X1205_REG_MOA1, 0x7F, 0, 12 }, ++ { X1205_REG_DTA1, 0x7F, 0, 31 }, ++ { X1205_REG_HRA1, 0x7F, 0, 23 }, ++ { X1205_REG_MNA1, 0x7F, 0, 59 }, ++ { X1205_REG_SCA1, 0x7F, 0, 59 }, ++ { X1205_REG_Y2K0, 0xFF, 19, 20 }, ++ { X1205_REG_DWA0, 0x7F, 0, 6 }, ++ { X1205_REG_MOA0, 0x7F, 0, 12 }, ++ { X1205_REG_DTA0, 0x7F, 0, 31 }, ++ { X1205_REG_HRA0, 0x7F, 0, 23 }, ++ { X1205_REG_MNA0, 0x7F, 0, 59 }, ++ { X1205_REG_SCA0, 0x7F, 0, 59 }, ++ }; ++ ++ /* check that registers have bits a 0 where expected */ ++ ++ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) ++ { ++ unsigned char buf; ++ ++ static unsigned char addr[2]; ++ ++ struct i2c_msg msgs[2] = { ++ { client->addr, 0, 2, addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &buf }, ++ }; ++ ++ addr[0] = 0x00; ++ addr[1] = probe_zero_pattern[i]; ++ ++ xfer = i2c_transfer(client->adapter, msgs, 2); ++ ++ if (xfer != 2) { ++ dev_dbg(&client->adapter->dev, ++ "%s: could not read register %x\n", ++ __FUNCTION__, addr[1]); ++ ++ return -EIO; ++ } ++ ++ if ((buf & probe_zero_pattern[i+1]) != 0) { ++ dev_dbg(&client->adapter->dev, ++ "%s: register %x, zero pattern %d: %x\n", ++ __FUNCTION__, addr[1], i, buf); ++ ++ return -ENODEV; ++ } ++ } ++ ++ /* check limits */ ++ ++ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) ++ { ++ unsigned char buf, val; ++ ++ static unsigned char addr[2]; ++ ++ struct i2c_msg msgs[2] = { ++ { client->addr, 0, 2, addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &buf }, ++ }; ++ ++ addr[0] = 0x00; ++ addr[1] = probe_limits_pattern[i].reg; ++ ++ xfer = i2c_transfer(client->adapter, msgs, 2); ++ ++ if (xfer != 2) { ++ dev_dbg(&client->adapter->dev, ++ "%s: could not read register %x\n", ++ __FUNCTION__, addr[1]); ++ ++ return -EIO; ++ } ++ ++ val = BCD2BIN(buf & probe_limits_pattern[i].mask); ++ ++ if (val > probe_limits_pattern[i].max || ++ val < probe_limits_pattern[i].min) { ++ dev_dbg(&client->adapter->dev, ++ "%s: register %x, lim pattern %d: %d\n", ++ __FUNCTION__, addr[1], i, val); ++ ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static int x1205_attach(struct i2c_adapter *adapter) ++{ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ return i2c_probe(adapter, &addr_data, x1205_probe); ++} ++ ++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) ++{ ++ struct i2c_client *new_client; ++ struct x1205_data *xdata; ++ ++ int err = 0; ++ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) { ++ err = -ENOMEM; ++ goto exit; ++ } ++ ++ /* Fill our data structure */ ++ ++ memset(xdata, 0, sizeof(struct x1205_data)); ++ ++ xdata->epoch = 2000; ++ ++ ++ /* Prepare i2c_client structure */ ++ ++ new_client = &xdata->client; ++ i2c_set_clientdata(new_client, xdata); ++ new_client->addr = address; ++ new_client->adapter = adapter; ++ new_client->driver = &x1205_driver; ++ new_client->flags = 0; ++ ++ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE); ++ ++ ++ /* Verify the chip is really an X1205 */ ++ ++ if (kind < 0) ++ { ++ if (x1205_validate_client(new_client) < 0) { ++ err = -ENODEV; ++ goto exit_kfree; ++ } ++ } ++ ++ /* Inform the i2c layer */ ++ if ((err = i2c_attach_client(new_client))) ++ goto exit_kfree; ++ ++ list_add(&xdata->list, &x1205_clients); ++ ++ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n", ++ DRIVER_NAME); ++ ++ /* If requested, se the system time */ ++ if (hctosys) ++ x1205_hctosys(new_client); ++ ++ return 0; ++ ++exit_kfree: ++ kfree(xdata); ++ ++exit: ++ return err; ++} ++ ++static int x1205_detach(struct i2c_client *client) ++{ ++ int err; ++ struct x1205_data *data = i2c_get_clientdata(client); ++ ++ dev_dbg(&client->dev, "%s\n", __FUNCTION__); ++ ++ if ((err = i2c_detach_client(client))) ++ return err; ++ ++ list_del(&data->list); ++ kfree(data); ++ return 0; ++} ++ ++/* make sure the rtc_time values are in bounds */ ++static int x1205_validate_tm(struct rtc_time *tm) ++{ ++ tm->tm_year += 1900; ++ ++ if (tm->tm_year < EPOCH_1970) ++ return -EINVAL; ++ ++ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) ++ return -EINVAL; ++ ++ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && ++ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) ++ return -EINVAL; ++ ++ if ((tm->tm_year -= EPOCH_1900) > 255) ++ return -EINVAL; ++ ++ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) ++{ ++ if (client == NULL || tm == NULL) ++ return -EINVAL; ++ ++ if (!capable(CAP_SYS_TIME)) ++ return -EACCES; ++ ++ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); ++ ++ switch (cmd) { ++ case X1205_CMD_GETDATETIME: ++ return x1205_get_datetime(client, tm, X1205_CCR_BASE); ++ ++ case X1205_CMD_SETTIME: ++ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE); ++ ++ case X1205_CMD_SETDATETIME: ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE); ++ ++ case X1205_CMD_GETALARM: ++ return x1205_get_datetime(client, tm, X1205_ALM0_BASE); ++ ++ case X1205_CMD_SETALARM: ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE); ++ ++ default: ++ return -EINVAL; ++ } ++} ++ ++ ++static int __init x1205_init(void) ++{ ++ return i2c_add_driver(&x1205_driver); ++} ++ ++static void __exit x1205_exit(void) ++{ ++ i2c_del_driver(&x1205_driver); ++} ++ ++MODULE_AUTHOR( ++ "Karen Spearel <kas11@tampabay.rr.com>, " ++ "Alessandro Zummo <a.zummo@towertech.it>"); ++MODULE_DESCRIPTION("Xicor X1205 RTC driver"); ++MODULE_LICENSE("GPL"); ++ ++EXPORT_SYMBOL_GPL(x1205_do_command); ++ ++module_init(x1205_init); ++module_exit(x1205_exit); +--- linux-2.6.14-rc3/include/linux/x1205.h 1970-01-01 01:00:00.000000000 +0100 ++++ test9/include/linux/x1205.h 2005-10-03 15:38:21.000000000 +0200 +@@ -0,0 +1,67 @@ ++ ++/* commands */ ++ ++#define X1205_CMD_GETDATETIME 0 ++#define X1205_CMD_SETTIME 1 ++#define X1205_CMD_SETDATETIME 2 ++#define X1205_CMD_GETALARM 3 ++#define X1205_CMD_SETALARM 4 ++ ++/* flags */ ++ ++#define X1205_NODATE 0 ++#define X1205_DATETOO 1 ++ ++/* offsets into read buf - add 2 for write buf */ ++ ++#define CCR_SEC 0 ++#define CCR_MIN 1 ++#define CCR_HOUR 2 ++#define CCR_MDAY 3 ++#define CCR_MONTH 4 ++#define CCR_YEAR 5 ++#define CCR_WDAY 6 ++#define CCR_Y2K 7 ++ ++#define X1205_REG_SR 0x3F /* status register */ ++#define X1205_REG_Y2K 0x37 ++#define X1205_REG_DW 0x36 ++#define X1205_REG_YR 0x35 ++#define X1205_REG_MO 0x34 ++#define X1205_REG_DT 0x33 ++#define X1205_REG_HR 0x32 ++#define X1205_REG_MN 0x31 ++#define X1205_REG_SC 0x30 ++#define X1205_REG_DTR 0x13 ++#define X1205_REG_ATR 0x12 ++#define X1205_REG_INT 0x11 ++#define X1205_REG_0 0x10 ++#define X1205_REG_Y2K1 0x0F ++#define X1205_REG_DWA1 0x0E ++#define X1205_REG_YRA1 0x0D ++#define X1205_REG_MOA1 0x0C ++#define X1205_REG_DTA1 0x0B ++#define X1205_REG_HRA1 0x0A ++#define X1205_REG_MNA1 0x09 ++#define X1205_REG_SCA1 0x08 ++#define X1205_REG_Y2K0 0x07 ++#define X1205_REG_DWA0 0x06 ++#define X1205_REG_YRA0 0x05 ++#define X1205_REG_MOA0 0x04 ++#define X1205_REG_DTA0 0x03 ++#define X1205_REG_HRA0 0x02 ++#define X1205_REG_MNA0 0x01 ++#define X1205_REG_SCA0 0x00 ++ ++#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */ ++#define X1205_CCR_BASE 0x30 /* Base address of CCR */ ++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ ++ ++#define X1205_SR_RTCF 0x01 ++#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */ ++#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */ ++ ++#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */ ++ ++extern int x1205_do_command(unsigned int cmd, void *arg); ++ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch new file mode 100644 index 0000000000..038c71c3b3 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch @@ -0,0 +1,461 @@ +--- linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Option + + comment "IXP4xx Platforms" + ++# This entry is placed on top because otherwise it would have ++# been shown as a submenu. ++config MACH_NSLU2 ++ bool ++ prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) ++ help ++ Say 'Y' here if you want your kernel to support Linksys's ++ NSLU2 NAS device. For more information on this platform, ++ see http://www.nslu2-linux.org ++ + config ARCH_AVILA + bool "Avila" + help +--- linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o + +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,77 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-pci.c ++ * ++ * NSLU2 board-level PCI initialization ++ * ++ * based on ixdp425-pci.c: ++ * Copyright (C) 2002 Intel Corporation. ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Maintainer: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/config.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++ ++#include <asm/mach/pci.h> ++#include <asm/mach-types.h> ++ ++void __init nslu2_pci_preinit(void) ++{ ++ set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); ++ set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); ++ set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); ++ ++ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); ++ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); ++ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); ++ ++ /* INTD is not configured as GPIO is used ++ * for the power input button. ++ */ ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { ++ IRQ_NSLU2_PCI_INTA, ++ IRQ_NSLU2_PCI_INTB, ++ IRQ_NSLU2_PCI_INTC, ++ }; ++ ++ int irq = -1; ++ ++ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && ++ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { ++ irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; ++ } ++ ++ return irq; ++} ++ ++struct hw_pci __initdata nslu2_pci = { ++ .nr_controllers = 1, ++ .preinit = nslu2_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = nslu2_map_irq, ++}; ++ ++int __init nslu2_pci_init(void) /* monkey see, monkey do */ ++{ ++ if (machine_is_nslu2()) ++ pci_common_init(&nslu2_pci); ++ ++ return 0; ++} ++ ++subsys_initcall(nslu2_pci_init); +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,92 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-power.c ++ * ++ * NSLU2 Power/Reset driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/reboot.h> ++#include <linux/interrupt.h> ++ ++#include <asm/mach-types.h> ++ ++extern void ctrl_alt_del(void); ++ ++static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ /* Signal init to do the ctrlaltdel action, this will bypass init if ++ * it hasn't started and do a kernel_restart. ++ */ ++ ctrl_alt_del(); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ /* This is the paper-clip reset, it shuts the machine down directly. ++ */ ++ machine_power_off(); ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init nslu2_power_init(void) ++{ ++ if (!(machine_is_nslu2())) ++ return 0; ++ ++ *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ ++ ++ set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); ++ set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); ++ ++ gpio_line_isr_clear(NSLU2_RB_GPIO); ++ gpio_line_isr_clear(NSLU2_PB_GPIO); ++ ++ if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, ++ SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) { ++ ++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", ++ NSLU2_RB_IRQ); ++ ++ return -EIO; ++ } ++ ++ if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler, ++ SA_INTERRUPT, "NSLU2 power button", NULL) < 0) { ++ ++ printk(KERN_DEBUG "Power Button IRQ %d not available\n", ++ NSLU2_PB_IRQ); ++ ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void __exit nslu2_power_exit(void) ++{ ++ free_irq(NSLU2_RB_IRQ, NULL); ++ free_irq(NSLU2_PB_IRQ, NULL); ++} ++ ++module_init(nslu2_power_init); ++module_exit(nslu2_power_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); ++MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); ++MODULE_LICENSE("GPL"); +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,134 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-setup.c ++ * ++ * NSLU2 board-setup ++ * ++ * based ixdp425-setup.c: ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Author: Mark Rakes <mrakes at mac.com> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * Fixed missing init_time in MACHINE_START kas11 10/22/04 ++ * Changed to conform to new style __init ixdp425 kas11 10/22/04 ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/serial.h> ++#include <linux/serial_8250.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data nslu2_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource nslu2_flash_resource = { ++ .start = NSLU2_FLASH_BASE, ++ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device nslu2_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev.platform_data = &nslu2_flash_data, ++ .num_resources = 1, ++ .resource = &nslu2_flash_resource, ++}; ++ ++static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { ++ .sda_pin = NSLU2_SDA_PIN, ++ .scl_pin = NSLU2_SCL_PIN, ++}; ++ ++static struct platform_device nslu2_i2c_controller = { ++ .name = "IXP4XX-I2C", ++ .id = 0, ++ .dev.platform_data = &nslu2_i2c_gpio_pins, ++ .num_resources = 0, ++}; ++ ++static struct resource nslu2_uart_resources[] = { ++ { ++ .start = IXP4XX_UART1_BASE_PHYS, ++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct plat_serial8250_port nslu2_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART1_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART1, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { } ++}; ++ ++static struct platform_device nslu2_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev.platform_data = nslu2_uart_data, ++ .num_resources = 2, ++ .resource = nslu2_uart_resources, ++}; ++ ++static struct platform_device *nslu2_devices[] __initdata = { ++ &nslu2_i2c_controller, ++ &nslu2_flash, ++ &nslu2_uart, ++}; ++ ++static void nslu2_power_off(void) ++{ ++ /* This causes the box to drop the power and go dead. */ ++ ++ /* enable the pwr cntl gpio */ ++ gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); ++ ++ /* do the deed */ ++ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); ++} ++ ++static void __init nslu2_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ pm_power_off = nslu2_power_off; ++ ++ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); ++} ++ ++MACHINE_START(NSLU2, "Linksys NSLU2") ++ /* Maintainer: www.nslu2-linux.org */ ++ .phys_ram = PHYS_OFFSET, ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, ++ .boot_params = 0x00000100, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .init_machine = nslu2_init, ++MACHINE_END +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000 +@@ -44,5 +44,6 @@ extern unsigned int processor_id; + #include "ixdp425.h" + #include "coyote.h" + #include "prpmc1100.h" ++#include "nslu2.h" + + #endif /* _ASM_ARCH_HARDWARE_H */ +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000 +@@ -93,4 +93,11 @@ + #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 + #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 + ++/* ++ * NSLU2 board IRQs ++ */ ++#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 ++#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 ++#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 ++ + #endif +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,96 @@ ++/* ++ * include/asm-arm/arch-ixp4xx/nslu2.h ++ * ++ * NSLU2 platform specific definitions ++ * ++ * Author: Mark Rakes <mrakes AT mac.com> ++ * Maintainers: http://www.nslu2-linux.org ++ * ++ * based on ixdp425.h: ++ * Copyright 2004 (c) MontaVista, Software, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#ifndef __ASM_ARCH_HARDWARE_H__ ++#error "Do not include this directly, instead #include <asm/hardware.h>" ++#endif ++ ++#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS ++#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE ++ ++#define NSLU2_SDA_PIN 7 ++#define NSLU2_SCL_PIN 6 ++ ++/* ++ * NSLU2 PCI IRQs ++ */ ++#define NSLU2_PCI_MAX_DEV 3 ++#define NSLU2_PCI_IRQ_LINES 3 ++ ++ ++/* PCI controller GPIO to IRQ pin mappings */ ++#define NSLU2_PCI_INTA_PIN 11 ++#define NSLU2_PCI_INTB_PIN 10 ++#define NSLU2_PCI_INTC_PIN 9 ++#define NSLU2_PCI_INTD_PIN 8 ++ ++ ++/* NSLU2 Timer */ ++#define NSLU2_FREQ 66000000 ++#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) ++#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) ++ ++/* GPIO */ ++ ++#define NSLU2_GPIO0 0 ++#define NSLU2_GPIO1 1 ++#define NSLU2_GPIO2 2 ++#define NSLU2_GPIO3 3 ++#define NSLU2_GPIO4 4 ++#define NSLU2_GPIO5 5 ++#define NSLU2_GPIO6 6 ++#define NSLU2_GPIO7 7 ++#define NSLU2_GPIO8 8 ++#define NSLU2_GPIO9 9 ++#define NSLU2_GPIO10 10 ++#define NSLU2_GPIO11 11 ++#define NSLU2_GPIO12 12 ++#define NSLU2_GPIO13 13 ++#define NSLU2_GPIO14 14 ++#define NSLU2_GPIO15 15 ++ ++/* Buttons */ ++ ++#define NSLU2_PB_GPIO NSLU2_GPIO5 ++#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */ ++#define NSLU2_RB_GPIO NSLU2_GPIO12 ++ ++#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5 ++#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12 ++ ++#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO) ++#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO) ++#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO) ++ ++/* Buzzer */ ++ ++#define NSLU2_GPIO_BUZZ 4 ++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) ++/* LEDs */ ++ ++#define NSLU2_LED_RED NSLU2_GPIO0 ++#define NSLU2_LED_GRN NSLU2_GPIO1 ++ ++#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED) ++#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN) ++ ++#define NSLU2_LED_DISK1 NSLU2_GPIO2 ++#define NSLU2_LED_DISK2 NSLU2_GPIO3 ++ ++#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2) ++#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3) ++ ++ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch new file mode 100644 index 0000000000..be1f696940 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch @@ -0,0 +1,125 @@ +--- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.171472071 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:23:52.923187955 -0700 +@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o + +--- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:19:43.443489188 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:23:52.923187955 -0700 +@@ -0,0 +1,113 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-rtc.c ++ * ++ * NSLU2 RTC driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on x1205-rtc.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/time.h> ++#include <linux/rtc.h> ++#include <linux/init.h> ++ ++#include <linux/x1205.h> ++ ++#include <asm/rtc.h> ++#include <asm/mach-types.h> ++ ++extern int (*set_rtc)(void); ++ ++static int nslu2_set_rtc(void) ++{ ++ struct rtc_time new_tm, old_tm; ++ unsigned long cur_secs = xtime.tv_sec; ++ ++ if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm)) ++ return 0; ++ ++ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */ ++ new_tm.tm_sec = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_min = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_hour = cur_secs % 24; ++ ++ /* ++ * avoid writing when we're going to change the day ++ * of the month. We will retry in the next minute. ++ * This basically means that if the RTC must not drift ++ * by more than 1 minute in 11 minutes. ++ */ ++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || ++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) ++ return 1; ++ ++ return x1205_do_command(X1205_CMD_SETTIME, &new_tm); ++} ++ ++static int rtc_read_alarm(struct rtc_wkalrm *alrm) ++{ ++ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time); ++} ++ ++static int rtc_set_alarm(struct rtc_wkalrm *alrm) ++{ ++ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time); ++} ++ ++static int rtc_read_time(struct rtc_time *tm) ++{ ++ return x1205_do_command(X1205_CMD_GETDATETIME, tm); ++} ++ ++static int rtc_set_time(struct rtc_time *tm) ++{ ++ return x1205_do_command(X1205_CMD_SETDATETIME, tm); ++} ++ ++static struct rtc_ops rtc_ops = { ++ .owner = THIS_MODULE, ++ .read_time = rtc_read_time, ++ .set_time = rtc_set_time, ++ .read_alarm = rtc_read_alarm, ++ .set_alarm = rtc_set_alarm, ++}; ++ ++static int __init nslu2_rtc_init(void) ++{ ++ int ret; ++ ++ if (!(machine_is_nslu2())) ++ return 0; ++ ++ printk(KERN_INFO "NSLU2: rtc\n"); ++ ++ if ((ret = register_rtc(&rtc_ops)) != 0) ++ return ret; ++ ++ set_rtc = nslu2_set_rtc; ++ ++ return 0; ++} ++ ++static void __exit nslu2_rtc_exit(void) ++{ ++ set_rtc = NULL; ++ ++ unregister_rtc(&rtc_ops); ++} ++ ++module_init(nslu2_rtc_init); ++module_exit(nslu2_rtc_exit); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch new file mode 100644 index 0000000000..e8a037385b --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch @@ -0,0 +1,175 @@ +--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Kconfig 2005-08-28 16:41:01.000000000 -0700 ++++ linux-2.6.13/drivers/input/misc/Kconfig 2005-10-26 15:24:01.199708764 -0700 +@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP + tristate "M68k Beeper support" + depends on M68K + ++config INPUT_NSLU2_BEEPER ++ tristate "NSLU2 Beeper support" ++ depends on MACH_NSLU2 ++ help ++ Say Y here if you want the embedded beeper on the LinkSys NSLU2 ++ to be used for bells and whistles. ++ ++ If unsure, say Y. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called nslu2spkr. ++ + config INPUT_UINPUT + tristate "User level driver support" + help +--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Makefile 2005-08-28 16:41:01.000000000 -0700 ++++ linux-2.6.13/drivers/input/misc/Makefile 2005-10-26 15:24:01.199708764 -0700 +@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp + obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o + obj-$(CONFIG_INPUT_UINPUT) += uinput.o + obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o ++obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o +--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/nslu2spkr.c 2005-10-26 15:19:43.711506053 -0700 ++++ linux-2.6.13/drivers/input/misc/nslu2spkr.c 2005-10-26 15:24:01.199708764 -0700 +@@ -0,0 +1,144 @@ ++/* ++ * drivers/input/misc/nslu2spkr.c ++ * ++ * NSLU2 Beeper driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/input.h> ++#include <linux/delay.h> ++ ++#include <asm/hardware.h> ++#include <asm/irq.h> ++ ++static unsigned int beep_on_startup = 1; ++module_param(beep_on_startup, bool, 0); ++MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup"); ++ ++DEFINE_SPINLOCK(beep_lock); ++ ++static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) ++{ ++ unsigned int count = 0; ++ unsigned long flags; ++ ++ if (type != EV_SND) ++ return -1; ++ ++ switch (code) { ++ case SND_BELL: ++ if (value) value = 1000; ++ case SND_TONE: ++ break; ++ default: ++ return -1; ++ } ++ ++ if (value > 20 && value < 32767) ++ count = (NSLU2_FREQ / (value*4)) - 1; ++ ++ spin_lock_irqsave(&beep_lock, flags); ++ ++ if (count) { ++ ++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT); ++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW); ++ ++ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ ++ } else { ++ ++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN); ++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH); ++ ++ *IXP4XX_OSRT2 = 0; ++ } ++ ++ spin_unlock_irqrestore(&beep_lock, flags); ++ ++ return 0; ++} ++ ++static struct input_dev nslu2_spkr_dev = { ++ .phys = "ixp420/gpio4", ++ .name = "NSLU2 Beeper", ++ .evbit[0] = BIT(EV_SND), ++ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE), ++ .event = nslu2_spkr_event, ++ .id = { ++ .bustype = BUS_HOST, ++ .vendor = 0x001f, ++ .product = 0x0001, ++ .version = 0x0100 ++ } ++}; ++ ++static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ /* clear interrupt */ ++ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND; ++ ++ /* flip the beeper output */ ++ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM; ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init nslu2_spkr_init(void) ++{ ++ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler, ++ SA_INTERRUPT | SA_TIMER, "NSLU2 beeper", NULL < 0)) { ++ ++ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n", ++ IRQ_IXP4XX_TIMER2); ++ ++ return -EIO; ++ } ++ ++ input_register_device(&nslu2_spkr_dev); ++ ++ /* do a little beep to tell the world we are alive */ ++ if (beep_on_startup) ++ { ++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440); ++ msleep(120); ++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0); ++ } ++ ++ printk(KERN_INFO "NSLU2: beeper\n"); ++ return 0; ++} ++ ++static void __exit nslu2_spkr_exit(void) ++{ ++ input_unregister_device(&nslu2_spkr_dev); ++ ++ disable_irq(IRQ_IXP4XX_TIMER2); ++ ++ /* turn it off */ ++ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0); ++ ++ free_irq(IRQ_IXP4XX_TIMER2, NULL); ++} ++ ++module_init(nslu2_spkr_init); ++module_exit(nslu2_spkr_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); ++MODULE_DESCRIPTION("NSLU2 Beeper driver"); ++MODULE_LICENSE("GPL"); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch new file mode 100644 index 0000000000..d3d200e4c4 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch @@ -0,0 +1,560 @@ +--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.443489188 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:08.652177718 -0700 +@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o + +--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:19:43.979522918 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:24:08.652177718 -0700 +@@ -0,0 +1,548 @@ ++//============================================================================= ++// ++// n2-io.c version 0.1.7 ++// Author: Karen Spearel <kas11 at tampabay.rr.com> ++// please report problems/bugs directly to the address above ++// ++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per ++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk ++// ++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, ++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT ++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER ++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. ++// ++//============================================================================= ++// GPIO Function State ++// 0 Red LED Status ++// 1 Green LED Ready = 1 ++// 2 Disk 2 LED On = 0 ++// 3 Disk 1 LED On = 0 ++// 4 Buzzer ++// 5 Power Button Pressed = 1 ++// 8 Power Down Output = 1 powers down NSLU2 ++// 12 Reset Pressed = 0 ++ ++#include <linux/config.h> ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/proc_fs.h> ++#include <linux/device.h> ++#include <linux/reboot.h> ++ ++#include <asm/uaccess.h> ++#include <asm-arm/irq.h> ++#include <asm-arm/delay.h> ++ ++/* Set this to 1 to output lots of debug messages. */ ++#define NSLU2_IO_DEBUG 0 ++ ++#if NSLU2_IO_DEBUG ++#define nslu2_io_debug(args) printk args ++#else ++#define nslu2_io_debug(args) ((void)0) ++#endif ++ ++#define VERSION "0.1.7" ++ ++#define NSLU2BZ_MAJOR 62 //buzzer ++#define NSLU2LM_MAJOR 126 ++ ++ ++#define NSLU2_BEEP_DUR_LONG 2000 ++#define NSLU2_BEEP_DUR_MED 400 ++#define NSLU2_BEEP_DUR_SHORT 100 ++#define NSLU2_BEEP_PITCH_HIGH 250 ++#define NSLU2_BEEP_PITCH_MED 500 ++#define NSLU2_BEEP_PITCH_LOW 1000 ++#define NSLU2_LONG_DELAY 30000 ++ ++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) ++ ++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe ++ ++#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible ++#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults ++#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults ++#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 ++#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies ++#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies ++#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever ++#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long ++ ++#define NSLU2LM_OFF _IOW('M',32,long) ++#define NSLU2LM_ON _IOW('M',33,long) ++#define NSLU2LM_BLINK _IOW('M',34,long) ++#define NSLU2LM_ALT _IOW('M',35,long) ++#define NSLU2LM_ALL_ON _IO('M',36) ++#define NSLU2LM_ALL_OFF _IO('M',37) ++ ++#define PHYS_LEDS 4 ++#define BLINK_DELAY 25 ++ ++// OR Masks to turn these LEDs ON ++ ++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 ++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 ++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 ++ ++// AND Masks to turn these LEDs OFF ++ ++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 ++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 ++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 ++ ++// AND Masks to turn these LEDs ON ++ ++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 ++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 ++ ++// Or Masks to turn these LEDs OFF ++ ++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 ++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 ++ ++// EOR masks for toggling LEDs on/off ++ ++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits ++#define RS_GRN_TGL 0x00000002 ++#define RS_RED_TGL 0x00000001 ++#define DISK1_TGL 0x00000008 ++#define DISK2_TGL 0x00000004 ++ ++// The LED names for switches ++ ++#define LED_RS_RED 0 ++#define LED_RS_GRN 1 ++#define LED_DISK1 2 ++#define LED_DISK2 3 ++#define LED_ALL 4 ++ ++static unsigned long ontime = 50; ++static unsigned long offtime = 450; ++static unsigned long bz_repeatcnt = 10; ++static unsigned long tone = 1000; ++ ++static struct timer_list n2lm_rsg_timer; //rs green ++static struct timer_list n2lm_rsr_timer; //rs red ++static struct timer_list n2lm_d1_timer; //drive 1 ++static struct timer_list n2lm_d2_timer; //drive 2 ++static struct timer_list n2bz_timer; //beeper ++ ++// sysfs class ++static struct class *n2lm_class; ++ ++//================================================================================================== ++// ++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the ++// GPIO output register is xor'd with a mask corresponding to the selected led which simply ++// flips that bit. No record of what any of the other leds is doing is needed. ++// ++//================================================================================================== ++// this blinks rs green or green/yellow if rs red is on ++#ifndef CONFIG_LEDS ++static void n2lm_rsg_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout ++ add_timer(&n2lm_rsg_timer); //reinit timer ++ return; ++} ++ ++// this blinks or alternates rs red green... inited wit green on/red off ++static void n2lm_rsr_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ return; ++} ++// blinks disk 1 ++static void n2lm_d1_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ return; ++} ++// blinks disk 2 ++static void n2lm_d2_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_start(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); ++ ++ switch(led) { ++ case LED_RS_RED: ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ break; ++ ++ case LED_RS_GRN: ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsg_timer); ++ break; ++ ++ case LED_DISK1: ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ break; ++ ++ case LED_DISK2: ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ break; ++ ++ default: ++ break; ++ } ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_stop(unsigned long led) ++{ ++ switch (led) { ++ case LED_RS_RED: ++ del_timer(&n2lm_rsr_timer); ++ break; ++ case LED_RS_GRN: ++ del_timer(&n2lm_rsg_timer); ++ break; ++ case LED_DISK1: ++ del_timer(&n2lm_d1_timer); ++ break; ++ case LED_DISK2: ++ del_timer(&n2lm_d2_timer); ++ break; ++ default: ++ break; ++ } ++ return; ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_timer_stop_all(void) ++{ ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ return; ++} ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledon(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb ++ return; ++ case LED_ALL: //all green ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; ++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); ++ return; ++ } ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledoff(unsigned long led) ++{ ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 ++ return; ++ case LED_ALL: ++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); ++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); ++ } ++} ++ ++//================================================================================================== ++ ++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); ++ ++ if (led < 0 || led >= PHYS_LEDS) ++ return -EINVAL; ++ ++ switch (cmd ) { ++ case NSLU2LM_ON: ++ n2lm_timer_stop(led); ++ n2lm_ledon(led); ++ break; ++ ++ case NSLU2LM_OFF: ++ n2lm_timer_stop(led); ++ n2lm_ledoff(led); ++ break; ++ ++ case NSLU2LM_BLINK: ++ n2lm_ledon(led); ++ if (led == LED_RS_RED) ++ n2lm_rsr_timer.data = RS_RED_TGL; ++ n2lm_timer_start(led); ++ break; ++ ++ case NSLU2LM_ALT: ++ if (led == LED_RS_RED) ++ { ++ n2lm_ledon(LED_RS_GRN); ++ n2lm_ledoff(LED_RS_RED); ++ n2lm_rsr_timer.data = RS_RG_ALT; ++ n2lm_timer_start(LED_RS_RED); ++ break; ++ } else ++ return -EINVAL; ++ ++ case NSLU2LM_ALL_ON: ++ n2lm_timer_stop_all(); ++ n2lm_ledon(LED_ALL); ++ break; ++ ++ case NSLU2LM_ALL_OFF: ++ n2lm_timer_stop_all(); ++ n2lm_ledoff(LED_ALL); ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static struct file_operations n2lm_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2lm_ioctl, ++}; ++#endif ++//================================================================================================== ++// We can't do anything fancy here since the system tick rate is far below that required to ++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until ++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing ++// important should be haprepening. ++//================================================================================================== ++ ++static void n2_buzz(int tone_delay, int duration) ++{ ++ int i; ++ ++ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM; ++ ++ for (i = 1; i < duration; i++) { ++ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM; ++ udelay(tone_delay); ++ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM; ++ udelay(tone_delay); ++ } ++ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM; ++ ++ return; ++} ++//================================================================================================= ++ ++// this handles the buzzer duty cycle ++static void n2bz_handler(unsigned long data) ++{ ++ if (--bz_repeatcnt > 0) { //if just one beep left to do ++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout ++ add_timer(&n2bz_timer); //reinit timer ++ } ++ n2_buzz(tone/2, ontime); ++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); ++ return; ++} ++ ++//================================================================================================== ++ ++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) ++{ ++ switch (cmd) { ++ case NSLU2BZ_BEEP: ++ n2_buzz(tone/2, ontime); ++ break; ++ ++ case NSLU2BZ_BEEP_STOP: ++ del_timer(&n2bz_timer); ++ break; ++ ++ case NSLU2BZ_BEEPS: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ n2bz_handler(0); ++ break; ++ ++ case NSLU2BZ_TONESET: ++ if (param >= 250 && param <= 2000) ++ tone = param; ++ break; ++ ++ case NSLU2BZ_ONTIME: ++ if (param > 4 && param < 201) ++ ontime = param; ++ break; ++ ++ case NSLU2BZ_SILENTTIME: ++ if (param > ontime) //enforce a reasonable duty cycle ++ offtime = param; ++ else ++ offtime = ontime; ++ break; ++ ++ case NSLU2BZ_REPEATCNT: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ break; ++ ++ case NSLU2BZ_COMBINED: ++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 ++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies ++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies ++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 ++ break; ++ ++ default: ++ break; ++ } ++ return 0; ++} ++ ++static struct file_operations n2bz_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2bz_ioctl, ++}; ++ ++static void n2iom_initarch(void) ++{ ++#ifndef CONFIG_LEDS ++ init_timer(&n2lm_rsg_timer); ++ init_timer(&n2lm_rsr_timer); ++ init_timer(&n2lm_d1_timer); ++ init_timer(&n2lm_d2_timer); ++ ++ n2lm_rsr_timer.function = n2lm_rsr_handler; ++ n2lm_rsg_timer.function = n2lm_rsg_handler; ++ n2lm_d2_timer.function = n2lm_d2_handler; ++ n2lm_d1_timer.function = n2lm_d1_handler; ++#endif ++ ++ init_timer(&n2bz_timer); ++ n2bz_timer.function = n2bz_handler; ++ ++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; ++ ++#ifndef CONFIG_LEDS ++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 ++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds ++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; ++ n2lm_ledon(LED_ALL); ++ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT); ++ n2lm_ledoff(LED_ALL); ++ ++ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit ++ n2lm_ledon(LED_RS_RED); ++#endif ++ ++ return; ++} ++ ++//================================================================================================== ++ ++static int __init n2iom_init(void) ++{ ++ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION); ++ ++ n2iom_initarch(); ++ ++ n2lm_class = class_create(THIS_MODULE, "nslu2"); ++ ++#ifndef CONFIG_LEDS ++ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) { ++ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); ++ } ++#endif ++ ++ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) { ++ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); ++ } ++ ++ return 0; ++} ++ ++//================================================================================================== ++ ++static void __exit n2iom_exit(void) ++{ ++ ++#ifndef CONFIG_LEDS ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ ++ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" ); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0)); ++#endif ++ ++ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz"); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0)); ++ ++ class_destroy(n2lm_class); ++} ++ ++module_init(n2iom_init); ++module_exit(n2iom_exit); ++ ++MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); ++MODULE_DESCRIPTION("NSLU2 I/O driver"); ++MODULE_LICENSE("GPL"); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch new file mode 100644 index 0000000000..2701c012f3 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch @@ -0,0 +1,267 @@ +--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/Kconfig 2005-10-26 15:19:34.490925838 -0700 ++++ linux-2.6.13/arch/arm/Kconfig 2005-10-26 15:24:18.628805508 -0700 +@@ -389,7 +389,8 @@ config LEDS + ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ + ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ +- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE ++ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ++ MACH_NSLU2 + help + If you say Y here, the LEDs on your machine will be used + to provide useful information about your current system status. +@@ -403,7 +404,7 @@ config LEDS + + config LEDS_TIMER + bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ +- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2 + depends on LEDS + default y if ARCH_EBSA110 + help +@@ -419,7 +420,8 @@ config LEDS_TIMER + + config LEDS_CPU + bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ +- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \ ++ || MACH_NSLU2 + depends on LEDS + help + If you say Y here, the red LED will be used to give a good real +--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.979522918 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:18.632805759 -0700 +@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote- + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o + obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o + ++leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o ++obj-$(CONFIG_LEDS) += $(leds-y) ++ ++ +--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:19:44.251540035 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:24:18.632805759 -0700 +@@ -0,0 +1,223 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-leds.c ++ * ++ * NSLU2 LEDs driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * and arch/arm/mach-footbridge/netwinder-leds.c ++ * Copyright (C) 1998-1999 Russell King ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/spinlock.h> ++#include <linux/notifier.h> ++ ++#include <asm/hardware.h> ++#include <asm/leds.h> ++#include <asm/mach-types.h> ++#include <asm/system.h> ++ ++#define LED_STATE_ENABLED 0x01 ++#define LED_STATE_CLAIMED 0x02 ++#define LED_STATE_IDLE 0x04 ++ ++static unsigned char led_state; ++static unsigned int hw_led_state; ++ ++static const unsigned long idle_seq[4] = { ++ ++ NSLU2_LED_GRN_BM, 0, ++ NSLU2_LED_GRN_BM, 0, ++}; ++ ++static const unsigned long busy_seq[4] = { ++ ++ NSLU2_LED_GRN_BM, 0, ++ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0, ++}; ++ ++static unsigned char led_count = 0; ++ ++static DEFINE_SPINLOCK(leds_lock); ++extern spinlock_t gpio_lock; ++ ++static void nslu2_leds_event(led_event_t evt) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&leds_lock, flags); ++ ++ switch (evt) { ++ case led_start: ++ /* Let's rock! Red led on, all others off. Remember ++ * that disk1/disk2 works inverted. On the NSLU2, the ++ * interface starts in a claimed state. XXX ++ */ ++ led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED; ++ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM ++ | NSLU2_LED_RED_BM; ++ break; ++ ++ case led_stop: ++ led_state &= ~LED_STATE_ENABLED; ++ break; ++ ++ case led_claim: ++ /* The user claimed the interface, red and green off */ ++ led_state |= LED_STATE_CLAIMED; ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_release: ++ /* The user released the interface, preserve the last ++ * status of the leds, except red/green. ++ */ ++ led_state &= ~LED_STATE_CLAIMED; ++ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C; ++ break; ++ ++#ifdef CONFIG_LEDS_TIMER ++ case led_timer: ++ /* Pulse green led */ ++ if (!(led_state & LED_STATE_CLAIMED)) ++ { ++ /* clear red and green bits */ ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ ++ /* copy the right sequence in */ ++ if (led_state & LED_STATE_IDLE) ++ hw_led_state |= idle_seq[led_count % 4]; ++ else ++ hw_led_state |= busy_seq[led_count % 4]; ++ ++ led_count++; ++ } ++ break; ++#endif ++ ++#ifdef CONFIG_LEDS_CPU ++ ++ case led_idle_start: ++ led_state |= LED_STATE_IDLE; ++#ifndef CONFIG_LEDS_TIMER ++ /* green on, red off */ ++ hw_led_state |= NSLU2_LED_GRN_BM; ++ hw_led_state &= ~NSLU2_LED_RED_BM; ++#endif ++ break; ++ ++ case led_idle_end: ++ led_state &= ~LED_STATE_IDLE; ++#ifndef CONFIG_LEDS_TIMER ++ /* green on, red on -> amber on */ ++ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM; ++#endif ++ break; ++#endif ++ ++ case led_halted: ++ if (!(led_state & LED_STATE_CLAIMED)) ++ hw_led_state |= NSLU2_LED_RED_BM; ++ break; ++ ++ /* leds */ ++ ++ case led_green_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= NSLU2_LED_GRN_BM; ++ break; ++ ++ case led_green_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~NSLU2_LED_GRN_BM; ++ break; ++ ++ case led_amber_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_amber_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_red_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= NSLU2_LED_RED_BM; ++ break; ++ ++ case led_red_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~NSLU2_LED_RED_BM; ++ break; ++ ++ default: ++ break; ++ } ++ ++ spin_unlock_irqrestore(&leds_lock, flags); ++ ++ if (led_state & LED_STATE_ENABLED) { ++ spin_lock_irqsave(&gpio_lock, flags); ++ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state; ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ } ++} ++ ++static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event, ++ void *ptr) ++{ ++ leds_event(led_green_off); ++ leds_event(led_red_on); ++ ++ return NOTIFY_DONE; ++} ++ ++static struct notifier_block nslu2_leds_panic_block = { ++ .notifier_call = nslu2_leds_panic_event, ++}; ++ ++static int __init nslu2_leds_init(void) ++{ ++ if (!(machine_is_nslu2())) ++ return 0; ++ ++ printk(KERN_INFO "NSLU2: leds\n"); ++ ++ /* register panic notifier */ ++ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block); ++ ++ /* enable gpio 0-3 */ ++ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT); ++ ++ leds_event = nslu2_leds_event; ++ ++ /* this will also initialize the leds to the ++ * default state. ++ */ ++ ++ leds_event(led_start); ++ ++ return 0; ++} ++ ++module_init(nslu2_leds_init); ++ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch new file mode 100644 index 0000000000..1a37b13a79 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch @@ -0,0 +1,11 @@ +--- linux-2.6.13/.pc/90-ixp4xx-pci-le.patch/arch/arm/mach-ixp4xx/common-pci.c 2005-08-28 16:41:01.000000000 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/common-pci.c 2005-10-26 15:24:30.337542292 -0700 +@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void) + #ifdef __ARMEB__ + *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; + #else +- *PCI_CSR = PCI_CSR_IC; ++ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; + #endif + + pr_debug("DONE\n"); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch new file mode 100644 index 0000000000..ab80672135 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch @@ -0,0 +1,13 @@ +*** linux-2.6.13/drivers/usb/net/pegasus.h.orig Mon Aug 29 01:41:01 2005 +--- linux-2.6.13/drivers/usb/net/pegasus.h Sat Oct 22 20:51:29 2005 +*************** +*** 181,186 **** +--- 181,188 ---- + DEFAULT_GPIO_RESET ) + PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, + DEFAULT_GPIO_RESET | PEGASUS_II ) ++ PEGASUS_DEV( "Philips CPWUE01/00 USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004, ++ DEFAULT_GPIO_RESET | PEGASUS_II ) + PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet", + VENDOR_ADMTEK, 0x8511, + DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig new file mode 100644 index 0000000000..83b25213ac --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig @@ -0,0 +1,1556 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14 +# Mon Nov 28 18:53:25 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +CONFIG_MACH_NSLU2=y +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_PHYSDEV=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=m +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MACLIST=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=m + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=m +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_IOP3XX is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_X1205=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +CONFIG_VIDEO_BT848=m +# CONFIG_VIDEO_SAA6588 is not set +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_TUNER_3036=m +CONFIG_VIDEO_STRADIS=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_DPC=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_OVCAMCHIP=m + +# +# Radio Adapters +# +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_VIDEO_VIDEOBUF=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_BUF=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA ARM devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_PWC=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y |