diff options
Diffstat (limited to 'packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES')
| -rw-r--r-- | packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES | 489 |
1 files changed, 0 insertions, 489 deletions
diff --git a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES deleted file mode 100644 index ae9d7c607c..0000000000 --- a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES +++ /dev/null @@ -1,489 +0,0 @@ -Unslung-6.x Family Release Notes - -Unslung is a replacement firmware image for the Linksys NSLU2 which is designed -to allow you to make changes to the root filesystem (including the installation -of downloadable packages) while still providing all the standard product -functionality. - -If, at any time, you have any questions concerning the installation or -operation of Unslung firmware, your first port of call should be the -NSLU2-Linux wiki at: - - http://www.nslu2-linux.org - -Specifically, check the HowTos and the Frequently Asked Questions before -posting to the mailing list or asking a question in the IRC channel -[#nslu2-general @ irc.freenode.net]. - -OK! Now that that's out of the way... - -This file is provided to give general information and usage notes for the -Unslung 6.x firmware. If you are looking for installation instructions, please -stop now and go to the README file. Follow the README instructions WORD for -WORD to keep from turning your NSLU2 into a brick. The information contained -in this file will make more sense if you have already "unslung" your NSLU2. - --------------------------------------------------------------------------------- - -These "Notes" are divided into four sections: - - 1 - GENERAL INFORMATION - 2 - IPKG PACKAGES - 3 - DIVERSION SCRIPTS - 4 - CHANGELOG - - -GENERAL INFORMATION - -As stated above, Unslung firmware is a replacement firmware image for the -Linksys NSLU2. The Unslung firmware is intended to be used for loading new -packages (giving enhanced or additional functionality) with minimal changes -to the standard user interface and firmware. The differences in the Unslung 6.x -firmware from the standard Linksys 2.3R63 firmware can be found at: - - http://www.nslu2-linux.org/wiki/Unslung/UnslungFeatures - -For more information about the Unslung firmware, including details on how to -build it from source code yourself, look at: - - http://www.nslu2-linux.org/wiki/Unslung - -There are several assumptions made in this Notes. One, you've successfully -unslung your NSLU2, and can verify the basic Linksys functionality (samba -users, groups, and shares setup with the Linksys interface). Two, that you can -get telnet or ssh shell access to your NSLU2 from any computer on the same -network as the NSLU2. Three, that you have read and understand the NSLU2-linux -community rules at: - - http://www.nslu2-linux.org/wiki/Main/HomePage - -If you understand the third assumption, then you also understand that there is -an emphasis on using and developing the NSLU2-Linux wiki. Clarifications and -further documentation is always welcomed on the wiki. - -If you are experienced with the Linux operating system, then you can make -changes directly to the root filesystem - changes which are persistent across -reboot. If you want to get involved, then check the NSLU2-linux wiki at: - - http://www.nslu2-linux.org/wiki/Main/HowToGetInvolved - - -IPKG PACKAGES - -Packages require you to be running Unslung firmware (as you may have already -guessed!) In general, ipkg packages are commonly available software packages -that have been ported to the NSLU2 - giving enhanced or additional -functionality. If you run into problems or have specific question with a -certain package, you should look on the Internet for the general documentation -about the package first. If your problem is specific to the NSLU2 port, then -check for further documentation for the corresponding package on the -NSLU2-Linux wiki at: - - http://www.nslu2-linux.org/wiki/Unslung/Packages - -When you "unsling" an external disk (check the README for instructions), -downloaded packages will be installed onto that external disk. The number of -packages that you can install is only limited by the size of the "data" -partition on the external disk. Note that you *must* *not* install any -packages before you have booted with an external "Unslung" disk. To do so will -almost certainly cause your internal jffs2 flash memory become full, and cause -you to have to reflash your NSLU2. - -Package Installation Details - - 1) Check for network connectivity to the package repository from the NSLU2 - first: "ping ipkg.nslu2-linux.org" - - - If this does not work, then please check the NSLU2 DNS settings in - the web interface (under "Administration", "LAN"). - - 3) Update the list of available packages from new feeds: "ipkg update" - - 4) Check the list of available packages for ones that you want on your - NSLU2: "ipkg list" - - 5) Install the packages: "ipkg install <package-name>" - -Most packages put their startup scripts into /opt/etc/init.d - which the -Unslung firmware automatically runs at boot. Some other packages are run from -the cron or xinetd daemons. - -You can also check the ipkg command arguments simply by typing "ipkg" at the -prompt. - - -DIVERSION SCRIPTS - -Diversion scripts are used to start packages, set variables or function -definitions at the time of the NSLU2 boot. The diversion mechanism allows you -to add to, or even replace the Linksys script functionality. They "divert" the -normal boot scripts to perform the needed action(s) and then can either "return -1" to continue normal factory script progress or "return 0" to abort the -diverted factory script. The diversion of startup scripts is done at the -lowest granularity, so you can just divert the rc.xinetd script and leave all -others unchanged. You are advised to use diversion scripts rather than editing -system files directly (as this will allow you to upgrade the Unslung firmware -in the future without having to make all of your changes again). - - - Note: If you do need to edit the system files directly, you can use the - "resling" script to save and load your modified system files. See - the NSLU2-Linux wiki at: - - http://www.nslu2-linux.org/wiki/Unslung/ReSling - -Diversion scripts go in the /unslung directory (you may have to create that -directory first). Note that after you have unslung to an external disk, then -the diversion scripts will be stored on that external disk (along with the rest -of the root filesystem). This means that recovering from an incorrect -diversion script is as simple as powering off, unplugging the disk, powering -on, hot-plugging the disk (note that the diversion scripts will only run if the -disk is attached at boot), and fix or remove the diversion script. - -You may divert as many or as few scripts as you like. Simply add the name of -the standard rc script into the appropriate /unslung directory and it will be -run. - -For example, I have a script /unslung/rc.local: - -#! /bin/sh -/opt/bin/do_foo -return 1 - -That will run at the beginning of the normal /etc/rc.d/rc.local, and then -the rest of the factory rc.local will be executed. If I do NOT want to run -the factory rc.local, my script would be: - -#!/bin/sh -/opt/bin/do_foo -return 0 - -That is, if the diversion script returns with something other than 0, it will -run the rest of the factory script. - -Note that any variable definitions or function declarations are allowed to -happen before the diversion script is called. This allows you to use the -variables and functions defined by the factory script. - -Also not that telnet is not enabled by default - there is an openssh package -and a dropbear package that either can replace telnet access with secure shell -access. - -OpenSSH is the simplest to install: - - - OpenSSH package details on NSLU2-Linux wiki at: - http://www.nslu2-linux.org/wiki/HowTo/UseOpenSSHForRemoteAccess - -Dropbear is preferred by some: - - - Dropbear package details on NSLU2-Linux wiki at: - http://www.nslu2-linux.org/wiki/HowTo/UseDropBearForRemoteAccess - -The rationale behind not enabling telnet by default is ensure that an Unslung -NSLU2 has the same network footprint as a stock NSLU2 with Linksys firmware. -That said, if you want to enable telnet on boot, then install the xinetd -package (which enables telnet by default). - - -CHANGELOG - -1.11: - -First public release - -1.12: - -Added a symlink to slingbox for gzip. Added flashfs (as simple utility for -preserving user files across hard disk formats during beta testing). - -1.13: - -Added LD_LIBRARY_PATH to /etc/profile (only works for telnet and ssh access, -not for serial or diversion scripts). - -1.14: - -Added Unslung Doc link to the User Guide page. - -2.3: - -Moved development to OpenEmbedded. - -2.4: - -Updated to the latest ipk binary instead of the simple script. - -2.5: - -Added the real wget (instead of using the busybox version). This is so we can -support .netrc files for commercial packages. - -2.6: - -Fixed the unsling script so it removes conflicting files on an upgrade. - -2.7: - -Began development of the -able variant. - -2.8: - -Added the patch for genesys enclosures. - -2.9: - -Reorganized the various variants into a more consistent scheme. - -2.10: - -Added the ext3flash-on-disk1 functionality. - -2.11: - -Added the README to /opt/doc. - -2.12: - -First public release of 2.x firmware. - -3.1: - -Added jffs2 functionality. - -3.2: - -Incorporated switchbox functionality. - -3.3: - -Added ramdisks for /dev and /var to reduce internal flash writes. - -3.4: - -Replaced flashfs script with new resling script. - -3.5: - -Added code to reinitialize /etc/mtab on boot. - -3.6: - -Mounted /dev and /var jffs2 directories as /dev.state and /var.state so that -they can be used for persistent changes which are used to populate the ramdisks -on the next boot. - -3.7: - -Added "Pluggable Personalities" - now runs diversion scripts from both the -internal jffs2 area and also from an external drive attached at boot time. - -3.8: - -Enabled mounting of external drives earlier in the boot process, so that the -rc, rc.sysinit, and rc.1 scripts can be diverted by external diversion scripts -on an attached drive. - -3.9: - -Moved a number of -able kernel features (such as USB devfs support) into --standard. - -3.10: - -Added support for unslung-start and unslung-stop diversion scripts, and package -shutdown scripts (K??foo). - -3.11: - -Added NFS kernel support (both client and server, and both V2 and V3 -protocols). - -3.12: - -Added basic maintenance mode support. If /.ramdisk exists in the jffs2 -filesystem, then the jffs2 filesystem is copied into a ramdisk on boot, and run -from there. This allows for updating firmware using the web interface. - -3.13: - -Added recovery mode support. If a viable root filesystem cannot be found, then -switchbox drops into a basic recovery shell, with a telnet daemon running as -192.168.1.77 with no password. This behavior can also be forced with a -/.recovery file in the jffs2 filesystem. - -3.14: - -Added web control of maintenance mode. You have to enable maintenance mode and -reboot before the firmware upgrade page allows you to enter a filename for the -new firmware. - -3.15: - -Added confirmation dialog boxes to the maintenance mode web control. - -3.16: - -First public release of 3.x firmware. - -3.17: - -Fixed syslog issue. Added FP patches. - -3.18: - -Fixed a number of minor issues regarding file permissions. -Added support for unslinging to the data partition. - -4.1: - -Split from 3.x stream to allow parallel development. - -4.2: - -New switchbox implementation with NFS and external USB disk root filesystem -support. - -4.3: - -Enabled devfs. - -4.4: - -Changed slingbox program locations to match those of OpenSlug so that -we can use the same switchbox for both. - -4.5: - -Enabled RAID support modules and USB camera support modules. - -4.6: - -Merged unslung-standard and unslung-able, and created the oe feed for -downloadable kernel modules. Updated the unsling script to support -external rootfs. - -4.7: - -Enabled lots of traffic shaping modules. Enabled support for external -disks on sda1, sda2, sdb1 and sdb2. - -4.8: - -Made Unslung *not* create ramdisk for /var and /dev when you've -unslung to an external disk. Fixed nsswitch.conf. Updated the feed -locations. Added /dev/st devices for tape drive support. - -4.9: - -Updated the unslung script to give feedback on the rootfs transfer, -and to preserve an existing upkg database on the target disk. Added -more device nodes to support the new downloadable kernel modules. - -4.10: - -Made Unslung wait until quota checking is complete before running -package startup scripts. Simplified unsling to support disk1 and -disk2 (data partitions) only. - -4.11: - -Removed /tmp ramdisk if unslung to an external disk. Now clears /tmp -and /mnt/backup on each boot. - -4.12: - -Updated to the latest ipkg version. - -4.13: - -Added /dev/sdd and /dev/sde device nodes. -Added support for alternate rootfs under expert user control. - -4.14: - -Added audio support to the kernel. Increased the USB disk startup -wait to 10 seconds, and added the ability to divert rc.bootbin to the -startup scripts. - -4.15: - -Added /dev/dsp and updated the README and NOTES files. - -4.16: - -Added the /sbin/slingover script for migrating packages from the 3.x locations. - -4.17: - -Developer-only release booting straight from jffs2 instead of using switchbox. - -4.18: - -A number of /linuxrc fixes. Removed support for alternate rootfs under expert -user control (expert users can now just edit the /linuxrc in jffs2 directly). - -4.19: - -Removed all trace of switchbox from the firmware. This saves 128Kb of flash, -and about 1MB of RAM. - -4.20: - -First public release of 4.x firmware. - -5.1: - -Upgraded to Linksys firmware V2.3R29, but kept telnetd. - -5.2: - -Removed the ipkg link, and made unsling put it back on an external disk. - -5.3: - -Replaced maintenance mode with code to allow entry into RedBoot Upgrade Mode. - -5.4: - -Removed all maintenance mode support, and also removed support for rootfs on -jffs2 but packages on external disk (it's either all or nothing). -Removed unused /mnt/sda1, /mnt/sda2, /mnt/sdb1, and /mnt/sdb2. -Disabled the download process (superceded by upgrade mode). -Disabled the generation of the "ourtelnetrescue" user (too insecure). -Added disk auto-wait countdown to /linuxrc (courtesy of glc). - -5.5: - -First public release of 5.x firmware. - -6.0: - -First alpha release of 6.x Unslung firmware, based on Linksys V2.3R63 firmware. - -6.5: - -Unsling script now prompts for a root password to be used, additional sanity -checks added to minimize the chance of an improper unsling. User feedback -added to indicate the status (running from internal flash or booted up from -an external drive) via /etc/motd, ipkg, as well as the main web page. Improved -diagnostic messages from unsling. Added the Linksys custom code to the "mount" -code in the slingbox version of mount. - -6.6: - -Changed the code that handles the ".ext3flash" functionality so that it can -handle booting from either /dev/sda or /dev/sdb. -Cleanup of the "telnet.htm" management page. -Unsling now creates the wmtp and utmp files. -Unsling now "edits" the .../conf/passwd file instead of replacing it. -Ipkg dependencies fixed so that kernel-modules no longer need "force-install". -Support for loopback mounting ISO images (loop.o and isofs.o are now created). -The keyspan.o USB serial kernel-module is also created at build time. -README file updated to reflect the new unsling script as well as the -change in preferred port for the primary external disk. - -6.7: - -Added original "netconsole" code as a kernel module -Fixed problem with password changing from the GUI and automatic mounting of -drives and flash devices in port 1. -Remove unnecessary directory /lib/modules/2.4.22-xfs/pcmcia. |