summaryrefslogtreecommitdiff
path: root/packages/linux
diff options
context:
space:
mode:
Diffstat (limited to 'packages/linux')
-rw-r--r--packages/linux/linux-omap/musb-dma-iso-in.eml276
-rw-r--r--packages/linux/linux-omap/musb-fix-ISO-in-unlink.diff69
-rw-r--r--packages/linux/linux-omap/musb-support-high-bandwidth.patch.eml268
-rw-r--r--packages/linux/linux-omap_git.bb5
4 files changed, 344 insertions, 274 deletions
diff --git a/packages/linux/linux-omap/musb-dma-iso-in.eml b/packages/linux/linux-omap/musb-dma-iso-in.eml
index 8f0a6c5689..56fc827a5d 100644
--- a/packages/linux/linux-omap/musb-dma-iso-in.eml
+++ b/packages/linux/linux-omap/musb-dma-iso-in.eml
@@ -1,138 +1,138 @@
-Fixes blurred capture images in dma mode. Isochronous error field in
-urb and source data buffer pointer were not updated properly in dma
-mode.
-
-Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
----
-diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
-index 08e421f..a481d54 100644
---- a/drivers/usb/musb/musb_host.c
-+++ b/drivers/usb/musb/musb_host.c
-@@ -1505,10 +1505,29 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- musb_writew(hw_ep->regs, MUSB_RXCSR, val);
-
- #ifdef CONFIG_USB_INVENTRA_DMA
-+ if (usb_pipeisoc(pipe)) {
-+ struct usb_iso_packet_descriptor *d;
-+
-+ d = urb->iso_frame_desc + qh->iso_idx;
-+ d->actual_length = xfer_len;
-+
-+ /* even if there was an error, we did the dma
-+ * for iso_frame_desc->length
-+ */
-+ if (d->status != EILSEQ && d->status != -EOVERFLOW)
-+ d->status = 0;
-+
-+ if (++qh->iso_idx >= urb->number_of_packets)
-+ done = true;
-+ else
-+ done = false;
-+
-+ } else {
- /* done if urb buffer is full or short packet is recd */
- done = (urb->actual_length + xfer_len >=
- urb->transfer_buffer_length
- || dma->actual_len < qh->maxpacket);
-+ }
-
- /* send IN token for next packet, without AUTOREQ */
- if (!done) {
-@@ -1545,7 +1564,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- if (dma) {
- struct dma_controller *c;
- u16 rx_count;
-- int ret;
-+ int ret, length;
-+ dma_addr_t buf;
-
- rx_count = musb_readw(epio, MUSB_RXCOUNT);
-
-@@ -1558,6 +1578,35 @@ void musb_host_rx(struct musb *musb, u8 epnum)
-
- c = musb->dma_controller;
-
-+ if (usb_pipeisoc(pipe)) {
-+ int status = 0;
-+ struct usb_iso_packet_descriptor *d;
-+
-+ d = urb->iso_frame_desc + qh->iso_idx;
-+
-+ if (iso_err) {
-+ status = -EILSEQ;
-+ urb->error_count++;
-+ }
-+ if (rx_count > d->length) {
-+ if (status == 0) {
-+ status = -EOVERFLOW;
-+ urb->error_count++;
-+ }
-+ DBG(2, "** OVERFLOW %d into %d\n",\
-+ rx_count, d->length);
-+
-+ length = d->length;
-+ } else
-+ length = rx_count;
-+ d->status = status;
-+ buf = urb->transfer_dma + d->offset;
-+ } else {
-+ length = rx_count;
-+ buf = urb->transfer_dma +
-+ urb->actual_length;
-+ }
-+
- dma->desired_mode = 0;
- #ifdef USE_MODE1
- /* because of the issue below, mode 1 will
-@@ -1569,6 +1618,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- urb->actual_length)
- > qh->maxpacket)
- dma->desired_mode = 1;
-+ if (rx_count < hw_ep->max_packet_sz_rx) {
-+ length = rx_count;
-+ dma->bDesiredMode = 0;
-+ } else {
-+ length = urb->transfer_buffer_length;
-+ }
- #endif
-
- /* Disadvantage of using mode 1:
-@@ -1606,12 +1661,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- */
- ret = c->channel_program(
- dma, qh->maxpacket,
-- dma->desired_mode,
-- urb->transfer_dma
-- + urb->actual_length,
-- (dma->desired_mode == 0)
-- ? rx_count
-- : urb->transfer_buffer_length);
-+ dma->desired_mode, buf, length);
-
- if (!ret) {
- c->channel_release(dma);
-@@ -1628,19 +1678,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- }
- }
-
-- if (dma && usb_pipeisoc(pipe)) {
-- struct usb_iso_packet_descriptor *d;
-- int iso_stat = status;
--
-- d = urb->iso_frame_desc + qh->iso_idx;
-- d->actual_length += xfer_len;
-- if (iso_err) {
-- iso_stat = -EILSEQ;
-- urb->error_count++;
-- }
-- d->status = iso_stat;
-- }
--
- finish:
- urb->actual_length += xfer_len;
- qh->offset += xfer_len;
---
-To unsubscribe from this list: send the line "unsubscribe linux-omap" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-
+Fixes blurred capture images in dma mode. Isochronous error field in
+urb and source data buffer pointer were not updated properly in dma
+mode.
+
+Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+---
+diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
+index 08e421f..a481d54 100644
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -1505,10 +1505,29 @@ void musb_host_rx(struct musb *musb, u8 epnum)
+ musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+ #ifdef CONFIG_USB_INVENTRA_DMA
++ if (usb_pipeisoc(pipe)) {
++ struct usb_iso_packet_descriptor *d;
++
++ d = urb->iso_frame_desc + qh->iso_idx;
++ d->actual_length = xfer_len;
++
++ /* even if there was an error, we did the dma
++ * for iso_frame_desc->length
++ */
++ if (d->status != EILSEQ && d->status != -EOVERFLOW)
++ d->status = 0;
++
++ if (++qh->iso_idx >= urb->number_of_packets)
++ done = true;
++ else
++ done = false;
++
++ } else {
+ /* done if urb buffer is full or short packet is recd */
+ done = (urb->actual_length + xfer_len >=
+ urb->transfer_buffer_length
+ || dma->actual_len < qh->maxpacket);
++ }
+
+ /* send IN token for next packet, without AUTOREQ */
+ if (!done) {
+@@ -1545,7 +1564,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
+ if (dma) {
+ struct dma_controller *c;
+ u16 rx_count;
+- int ret;
++ int ret, length;
++ dma_addr_t buf;
+
+ rx_count = musb_readw(epio, MUSB_RXCOUNT);
+
+@@ -1558,6 +1578,35 @@ void musb_host_rx(struct musb *musb, u8 epnum)
+
+ c = musb->dma_controller;
+
++ if (usb_pipeisoc(pipe)) {
++ int status = 0;
++ struct usb_iso_packet_descriptor *d;
++
++ d = urb->iso_frame_desc + qh->iso_idx;
++
++ if (iso_err) {
++ status = -EILSEQ;
++ urb->error_count++;
++ }
++ if (rx_count > d->length) {
++ if (status == 0) {
++ status = -EOVERFLOW;
++ urb->error_count++;
++ }
++ DBG(2, "** OVERFLOW %d into %d\n",\
++ rx_count, d->length);
++
++ length = d->length;
++ } else
++ length = rx_count;
++ d->status = status;
++ buf = urb->transfer_dma + d->offset;
++ } else {
++ length = rx_count;
++ buf = urb->transfer_dma +
++ urb->actual_length;
++ }
++
+ dma->desired_mode = 0;
+ #ifdef USE_MODE1
+ /* because of the issue below, mode 1 will
+@@ -1569,6 +1618,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
+ urb->actual_length)
+ > qh->maxpacket)
+ dma->desired_mode = 1;
++ if (rx_count < hw_ep->max_packet_sz_rx) {
++ length = rx_count;
++ dma->bDesiredMode = 0;
++ } else {
++ length = urb->transfer_buffer_length;
++ }
+ #endif
+
+ /* Disadvantage of using mode 1:
+@@ -1606,12 +1661,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
+ */
+ ret = c->channel_program(
+ dma, qh->maxpacket,
+- dma->desired_mode,
+- urb->transfer_dma
+- + urb->actual_length,
+- (dma->desired_mode == 0)
+- ? rx_count
+- : urb->transfer_buffer_length);
++ dma->desired_mode, buf, length);
+
+ if (!ret) {
+ c->channel_release(dma);
+@@ -1628,19 +1678,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
+ }
+ }
+
+- if (dma && usb_pipeisoc(pipe)) {
+- struct usb_iso_packet_descriptor *d;
+- int iso_stat = status;
+-
+- d = urb->iso_frame_desc + qh->iso_idx;
+- d->actual_length += xfer_len;
+- if (iso_err) {
+- iso_stat = -EILSEQ;
+- urb->error_count++;
+- }
+- d->status = iso_stat;
+- }
+-
+ finish:
+ urb->actual_length += xfer_len;
+ qh->offset += xfer_len;
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap/musb-fix-ISO-in-unlink.diff b/packages/linux/linux-omap/musb-fix-ISO-in-unlink.diff
new file mode 100644
index 0000000000..c93a5b06c8
--- /dev/null
+++ b/packages/linux/linux-omap/musb-fix-ISO-in-unlink.diff
@@ -0,0 +1,69 @@
+From: Ajay Kumar Gupta <ajay.gupta@ti.com>
+To: linux-omap@vger.kernel.org
+Cc: linux-usb@vger.kernel.org, felipe.balbi@nokia.com,
+ stern@rowland.harvard.edu, Ajay Kumar Gupta <ajay.gupta@ti.com>
+Subject: [PATCH v3] OMAP:MUSB: Corrects urb unlink function path
+Date: Mon, 25 Aug 2008 10:52:16 +0530
+
+Fixes kernel panic while ISO IN transfer is aborted.Replaced
+usb_hcd_unlink_urb_from_ep() from musb_giveback() to __musb_giveback()
+to make sure urb is unlinked before giveback when __musb_giveback() is
+called from musb_urb_dequeue().
+
+Acquired musb->lock() before usb_hcd_unlink_urb_from_ep() within in
+enqueue path.
+
+Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+---
+ drivers/usb/musb/musb_host.c | 7 +++++--
+ 1 files changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
+index 08e421f..4279311 100644
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -291,6 +291,7 @@ __acquires(musb->lock)
+ urb->actual_length, urb->transfer_buffer_length
+ );
+
++ usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+ spin_unlock(&musb->lock);
+ usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+ spin_lock(&musb->lock);
+@@ -353,8 +354,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+ break;
+ }
+
+- usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+-
+ qh->is_ready = 0;
+ __musb_giveback(musb, urb, status);
+ qh->is_ready = ready;
+@@ -1787,7 +1786,9 @@ static int musb_urb_enqueue(
+ */
+ qh = kzalloc(sizeof *qh, mem_flags);
+ if (!qh) {
++ spin_lock_irqsave(&musb->lock, flags);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
++ spin_unlock_irqrestore(&musb->lock, flags);
+ return -ENOMEM;
+ }
+
+@@ -1899,7 +1900,9 @@ static int musb_urb_enqueue(
+
+ done:
+ if (ret != 0) {
++ spin_lock_irqsave(&musb->lock, flags);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
++ spin_unlock_irqrestore(&musb->lock, flags);
+ kfree(qh);
+ }
+ return ret;
+--
+1.5.6
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap/musb-support-high-bandwidth.patch.eml b/packages/linux/linux-omap/musb-support-high-bandwidth.patch.eml
index 0054093603..0264a97045 100644
--- a/packages/linux/linux-omap/musb-support-high-bandwidth.patch.eml
+++ b/packages/linux/linux-omap/musb-support-high-bandwidth.patch.eml
@@ -1,134 +1,134 @@
-Enables support for camera (as creative) requiring high bandwidth
-isochronous transfer.
-
-Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
----
- drivers/usb/musb/musb_core.c | 18 +++++++++---------
- drivers/usb/musb/musb_host.c | 32 +++++++++++++++++++++-----------
- 2 files changed, 30 insertions(+), 20 deletions(-)
-
-diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
-index c939f81..9914f70 100644
---- a/drivers/usb/musb/musb_core.c
-+++ b/drivers/usb/musb/musb_core.c
-@@ -1063,17 +1063,17 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
- { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
- { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, },
- { .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 512, },
--{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
-+{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 64, },
- { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
--{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
-+{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 64, },
- { .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 512, },
--{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 512, },
--{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 512, },
--{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 512, },
--{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 512, },
--{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 512, },
--{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 512, },
--{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 512, },
-+{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
-+{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
-+{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 256, },
-+{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
-+{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 256, },
-+{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 256, },
-+{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 4096, },
- { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
- { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
- };
-diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
-index 08e421f..84173df 100644
---- a/drivers/usb/musb/musb_host.c
-+++ b/drivers/usb/musb/musb_host.c
-@@ -1443,6 +1443,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- /* packet error reported later */
- iso_err = true;
- }
-+ } else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
-+ DBG(3, "end %d Highbandwidth incomplete ISO packet received\n"
-+ , epnum);
-+ status = -EPROTO;
- }
-
- /* faults abort the transfer */
-@@ -1595,7 +1599,13 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- val &= ~MUSB_RXCSR_H_AUTOREQ;
- else
- val |= MUSB_RXCSR_H_AUTOREQ;
-- val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
-+
-+ if (qh->maxpacket & ~0x7ff)
-+ /* Autoclear doesn't work in high bandwidth iso */
-+ val |= MUSB_RXCSR_DMAENAB;
-+ else
-+ val |= MUSB_RXCSR_AUTOCLEAR
-+ | MUSB_RXCSR_DMAENAB;
-
- musb_writew(epio, MUSB_RXCSR,
- MUSB_RXCSR_H_WZC_BITS | val);
-@@ -1666,6 +1676,7 @@ static int musb_schedule(
- int best_end, epnum;
- struct musb_hw_ep *hw_ep = NULL;
- struct list_head *head = NULL;
-+ u16 maxpacket;
-
- /* use fixed hardware for control and bulk */
- switch (qh->type) {
-@@ -1708,6 +1719,13 @@ static int musb_schedule(
- best_diff = 4096;
- best_end = -1;
-
-+ if (qh->maxpacket & (1<<11))
-+ maxpacket = 2 * (qh->maxpacket & 0x7ff);
-+ else if (qh->maxpacket & (1<<12))
-+ maxpacket = 3 * (qh->maxpacket & 0x7ff);
-+ else
-+ maxpacket = (qh->maxpacket & 0x7ff);
-+
- for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
- int diff;
-
-@@ -1718,9 +1736,9 @@ static int musb_schedule(
- continue;
-
- if (is_in)
-- diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
-+ diff = hw_ep->max_packet_sz_rx - maxpacket;
- else
-- diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
-+ diff = hw_ep->max_packet_sz_tx - maxpacket;
-
- if (diff > 0 && best_diff > diff) {
- best_diff = diff;
-@@ -1797,13 +1815,6 @@ static int musb_urb_enqueue(
- qh->is_ready = 1;
-
- qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
--
-- /* no high bandwidth support yet */
-- if (qh->maxpacket & ~0x7ff) {
-- ret = -EMSGSIZE;
-- goto done;
-- }
--
- qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-
-@@ -1897,7 +1908,6 @@ static int musb_urb_enqueue(
- }
- spin_unlock_irqrestore(&musb->lock, flags);
-
--done:
- if (ret != 0) {
- usb_hcd_unlink_urb_from_ep(hcd, urb);
- kfree(qh);
---
-1.5.6
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-omap" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-
+Enables support for camera (as creative) requiring high bandwidth
+isochronous transfer.
+
+Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+---
+ drivers/usb/musb/musb_core.c | 18 +++++++++---------
+ drivers/usb/musb/musb_host.c | 32 +++++++++++++++++++++-----------
+ 2 files changed, 30 insertions(+), 20 deletions(-)
+
+diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
+index c939f81..9914f70 100644
+--- a/drivers/usb/musb/musb_core.c
++++ b/drivers/usb/musb/musb_core.c
+@@ -1063,17 +1063,17 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
+ { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 512, },
+-{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
++{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 64, },
+ { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
+-{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
++{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 64, },
+ { .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 512, },
+-{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 512, },
+-{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 512, },
+-{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 512, },
+-{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 512, },
+-{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 512, },
+-{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 512, },
+-{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 512, },
++{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
++{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
++{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 256, },
++{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
++{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 256, },
++{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 256, },
++{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 4096, },
+ { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+ { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+ };
+diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
+index 08e421f..84173df 100644
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -1443,6 +1443,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
+ /* packet error reported later */
+ iso_err = true;
+ }
++ } else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
++ DBG(3, "end %d Highbandwidth incomplete ISO packet received\n"
++ , epnum);
++ status = -EPROTO;
+ }
+
+ /* faults abort the transfer */
+@@ -1595,7 +1599,13 @@ void musb_host_rx(struct musb *musb, u8 epnum)
+ val &= ~MUSB_RXCSR_H_AUTOREQ;
+ else
+ val |= MUSB_RXCSR_H_AUTOREQ;
+- val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
++
++ if (qh->maxpacket & ~0x7ff)
++ /* Autoclear doesn't work in high bandwidth iso */
++ val |= MUSB_RXCSR_DMAENAB;
++ else
++ val |= MUSB_RXCSR_AUTOCLEAR
++ | MUSB_RXCSR_DMAENAB;
+
+ musb_writew(epio, MUSB_RXCSR,
+ MUSB_RXCSR_H_WZC_BITS | val);
+@@ -1666,6 +1676,7 @@ static int musb_schedule(
+ int best_end, epnum;
+ struct musb_hw_ep *hw_ep = NULL;
+ struct list_head *head = NULL;
++ u16 maxpacket;
+
+ /* use fixed hardware for control and bulk */
+ switch (qh->type) {
+@@ -1708,6 +1719,13 @@ static int musb_schedule(
+ best_diff = 4096;
+ best_end = -1;
+
++ if (qh->maxpacket & (1<<11))
++ maxpacket = 2 * (qh->maxpacket & 0x7ff);
++ else if (qh->maxpacket & (1<<12))
++ maxpacket = 3 * (qh->maxpacket & 0x7ff);
++ else
++ maxpacket = (qh->maxpacket & 0x7ff);
++
+ for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+ int diff;
+
+@@ -1718,9 +1736,9 @@ static int musb_schedule(
+ continue;
+
+ if (is_in)
+- diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
++ diff = hw_ep->max_packet_sz_rx - maxpacket;
+ else
+- diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
++ diff = hw_ep->max_packet_sz_tx - maxpacket;
+
+ if (diff > 0 && best_diff > diff) {
+ best_diff = diff;
+@@ -1797,13 +1815,6 @@ static int musb_urb_enqueue(
+ qh->is_ready = 1;
+
+ qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+-
+- /* no high bandwidth support yet */
+- if (qh->maxpacket & ~0x7ff) {
+- ret = -EMSGSIZE;
+- goto done;
+- }
+-
+ qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+@@ -1897,7 +1908,6 @@ static int musb_urb_enqueue(
+ }
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+-done:
+ if (ret != 0) {
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ kfree(qh);
+--
+1.5.6
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap_git.bb b/packages/linux/linux-omap_git.bb
index d9e6c53bf4..54a73b308c 100644
--- a/packages/linux/linux-omap_git.bb
+++ b/packages/linux/linux-omap_git.bb
@@ -8,8 +8,8 @@ COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|
SRCREV = "e1c49d7d22af768188e2a54c167ed79919361e55"
-PV = "2.6.26+2.6.27-rc6+${PR}+git${SRCREV}"
-PR = "r8"
+PV = "2.6.26+2.6.27-rc7+${PR}+git${SRCREV}"
+PR = "r9"
SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \
file://defconfig"
@@ -30,6 +30,7 @@ SRC_URI_append = " \
file://mru-improve-pixclock-config.diff;patch=1 \
file://mru-make-video-timings-selectable.diff;patch=1 \
file://mru-enable-overlay-optimalization.diff;patch=1 \
+ file://musb-fix-ISO-in-unlink.diff;patch=1 \
"
temporarely-disabled = " \