summaryrefslogtreecommitdiff
path: root/packages/linux
diff options
context:
space:
mode:
Diffstat (limited to 'packages/linux')
-rw-r--r--packages/linux/ixp4xx-kernel/2.6.15/80-nslu2-io.patch13
-rw-r--r--packages/linux/ixp4xx-kernel/2.6.15/81-nslu2-power.patch12
-rw-r--r--packages/linux/ixp4xx-kernel/2.6.15/82-nas100d-power.patch12
-rw-r--r--packages/linux/ixp4xx-kernel_2.6.15.bb2
-rw-r--r--packages/linux/nas100d-kernel.inc243
-rw-r--r--packages/linux/nas100d-kernel/.mtn2git_empty0
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/.mtn2git_empty0
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/00-memory-h-page-shift.patch91
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch70
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/15-jffs2-endian-config.patch68
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/40-rtc-class.patch2719
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/50-nas100d-arch.patch453
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/60-nas100d-i2c.patch531
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/60-nas100d-ide.patch155
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/85-timer.patch246
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/91-maclist.patch377
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/92-nas100d-maclist.patch72
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/anonymiser.patch22
-rw-r--r--packages/linux/nas100d-kernel/2.6.15/defconfig1672
-rw-r--r--packages/linux/nas100d-kernel_2.6.15.bb34
20 files changed, 36 insertions, 6756 deletions
diff --git a/packages/linux/ixp4xx-kernel/2.6.15/80-nslu2-io.patch b/packages/linux/ixp4xx-kernel/2.6.15/80-nslu2-io.patch
index 7a5b2d51cb..a0921dffe5 100644
--- a/packages/linux/ixp4xx-kernel/2.6.15/80-nslu2-io.patch
+++ b/packages/linux/ixp4xx-kernel/2.6.15/80-nslu2-io.patch
@@ -8,9 +8,9 @@
+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-io.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,548 @@
+--- /dev/null 2005-12-25 02:27:49.000000000 +1030
++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 2006-01-15 04:11:10.000000000 +1030
+@@ -0,0 +1,555 @@
+//=============================================================================
+//
+// n2-io.c version 0.1.7
@@ -48,6 +48,8 @@
+#include <asm-arm/irq.h>
+#include <asm-arm/delay.h>
+
++#include <asm/mach-types.h>
++
+/* Set this to 1 to output lots of debug messages. */
+#define NSLU2_IO_DEBUG 0
+
@@ -505,6 +507,9 @@
+
+static int __init n2iom_init(void)
+{
++ if (!machine_is_nslu2())
++ return 0;
++
+ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
+
+ n2iom_initarch();
@@ -536,6 +541,8 @@
+
+static void __exit n2iom_exit(void)
+{
++ if (!machine_is_nslu2())
++ return 0;
+
+#ifndef CONFIG_LEDS
+ del_timer(&n2lm_rsg_timer);
diff --git a/packages/linux/ixp4xx-kernel/2.6.15/81-nslu2-power.patch b/packages/linux/ixp4xx-kernel/2.6.15/81-nslu2-power.patch
new file mode 100644
index 0000000000..ab8bdd8eae
--- /dev/null
+++ b/packages/linux/ixp4xx-kernel/2.6.15/81-nslu2-power.patch
@@ -0,0 +1,12 @@
+--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-power.c~ 2006-01-03 13:51:10.000000000 +1030
++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-power.c 2006-01-15 03:57:59.000000000 +1030
+@@ -80,6 +80,9 @@
+
+ static void __exit nslu2_power_exit(void)
+ {
++ if (!(machine_is_nslu2()))
++ return 0;
++
+ free_irq(NSLU2_RB_IRQ, NULL);
+ free_irq(NSLU2_PB_IRQ, NULL);
+ }
diff --git a/packages/linux/ixp4xx-kernel/2.6.15/82-nas100d-power.patch b/packages/linux/ixp4xx-kernel/2.6.15/82-nas100d-power.patch
new file mode 100644
index 0000000000..f02714beea
--- /dev/null
+++ b/packages/linux/ixp4xx-kernel/2.6.15/82-nas100d-power.patch
@@ -0,0 +1,12 @@
+--- linux-2.6.15/arch/arm/mach-ixp4xx/nas100d-power.c~ 2006-01-15 00:22:38.000000000 +1030
++++ linux-2.6.15/arch/arm/mach-ixp4xx/nas100d-power.c 2006-01-15 03:58:13.000000000 +1030
+@@ -58,6 +58,9 @@
+
+ static void __exit nas100d_power_exit(void)
+ {
++ if (!(machine_is_nas100d()))
++ return 0;
++
+ free_irq(NAS100D_RB_IRQ, NULL);
+ }
+
diff --git a/packages/linux/ixp4xx-kernel_2.6.15.bb b/packages/linux/ixp4xx-kernel_2.6.15.bb
index ce501ff40f..35164138f7 100644
--- a/packages/linux/ixp4xx-kernel_2.6.15.bb
+++ b/packages/linux/ixp4xx-kernel_2.6.15.bb
@@ -30,6 +30,8 @@ IXP4XX_PATCHES += "file://60-nslu2-beeper.patch;patch=1"
IXP4XX_PATCHES += "file://65-loft-config.patch;patch=1"
# IXP4XX_PATCHES += "file://75-nslu2-leds.patch;patch=1"
IXP4XX_PATCHES += "file://80-nslu2-io.patch;patch=1"
+IXP4XX_PATCHES += "file://81-nslu2-power.patch;patch=1"
+IXP4XX_PATCHES += "file://82-nas100d-power.patch;patch=1"
IXP4XX_PATCHES += "file://85-timer.patch;patch=1"
IXP4XX_PATCHES += "file://91-maclist.patch;patch=1"
IXP4XX_PATCHES += "file://92-nas100d-maclist.patch;patch=1"
diff --git a/packages/linux/nas100d-kernel.inc b/packages/linux/nas100d-kernel.inc
deleted file mode 100644
index 69e9f4d285..0000000000
--- a/packages/linux/nas100d-kernel.inc
+++ /dev/null
@@ -1,243 +0,0 @@
-# nas100d-kernel.inc
-#
-# Standard definitions for any NAS 100d Linux kernel.
-# Include this file in a .bb which specifies, at least,
-# PN,PV,PR for the desired kernel
-#
-# Define the following *before* including this file as
-# required:
-#
-# N1K_FILES - kernel-tree path of files to install
-# N1K_PATCHES - full list of patches to apply
-#
-# N1K_SUFFIX - the suffix to add after 'zImage-' in the
-# deploy/images directory - defaults to "ludeos"
-#
-# --------------------------------------------------------------
-#
-# Within this file bitbake variables local to the file are
-# named N1K_FOO
-#
-SECTION = "kernel"
-DESCRIPTION = "Linux kernel for the Iomega NAS 100d device"
-LICENSE = "GPL"
-MAINTAINER = "John Bowler <jbowler@acm.org>"
-
-DEPENDS += "devio-native"
-
-# Linux kernel source has the general form linux-X.Y.Z-patchP,
-# X.Y is the major version number, Z (which may have multiple
-# parts) is a sub-version and 'patch' is something like 'mm' or
-# 'ac' with a patch version. The original bz2 archive will be
-# in a directory/file vX.Y/linux-X.Y.Z.tar.bz2. The unpacked
-# source will be in the directory linux-X.Y.Z and this directory
-# name corresponds to the module directory (in /lib/modules).
-#
-# The corresponding .bb file should be called:
-#
-# package_X.Y.Z-patchP
-#
-# Giving PN=package PV=X.Y.Z-patchP (and PR is set in the .bb
-# file). Files, including the all important defconfig, are
-# searched for in the following directories (last one first):
-#
-# ludeos-kernel-2.6.11.2
-# nas100d-kernel/files
-# nas100d-kernel/X.Y
-# nas100d-kernel/X.Y.Z
-# nas100d-kernel/X.Y.Z-patch
-# nas100d-kernel/X.Y.Z-patchP
-# package-X.Y.Z-patchP
-#
-# This allows sharing of patch files and other useful source!
-# To share a file or patch with an earlier version put it in
-# the shared directory - e.g. to use foo.patch on 2.6.11.2 and
-# 2.6.11.4 it should be in directory nas100d-kernel/2.6.11.
-#
-# Note that when there are multiple patches the X.Y.Z-patch form
-# uses base-patch (e.g. 2.6.12-mm) whereas X.Y.Z-patchP has the
-# full form, for example 2.6.12-rc3-mm1 (in the same case).
-
-#PN=package-name
-#PV=package-version (full)
-
-# The patch has the general form (rcN|preN|acN|mmN|bkN)* with the
-# separate patch items being separated by '-' characters. The
-# rc patch is first and has the important property that it
-# requires the *preceding* kernel base version and that this
-# will be the source directory name.
-python () {
- # The patches list may be empty. This code starts with the base
- # kernel version and steps through the patches. Because the rc and
- # pre patches actually require the *preceding* kernel version the code
- # fixes that up appropriately.
- pv = bb.data.getVar("PV",d,1).split('-')
- kernel = pv[0].split('.')
- base = pv[0]
- name = [base]
- major = '.'.join(name[0].split('.')[0:2])
- minor = '.'.join(name[0].split('.')[0:3])
- patch_uri = [ None ]
- filedir = "${FILE_DIRNAME}/nas100d-kernel/%s"
- # This entry will become the last one (everything is inserted before it)
- filepath = [ filedir % "files" ]
- pref = 10
- mmac = 0
- for patch in pv[1:]:
- name.append(patch)
- pname = '-'.join(name)
- if patch[0:2] == "rc" or patch[0:3] == "pre":
- patch_uri.append("ftp://ftp.kernel.org/pub/linux/kernel/v%s/testing/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
- kernel[-1] = str(int(kernel[-1]) - 1)
- if patch[0:2] == "rc" and pref == 10:
- pref = 6
- filepath[0:0] = [ filedir % name[0] ]
- filepath[0:0] = [ filedir % (name[0] + "-rc") ]
- else:
- pref = 2
- elif patch[0:2] == "bk" or patch[0:3] == "git":
- patch_uri.append("ftp://ftp.kernel.org/pub/linux/kernel/v%s/snapshots/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
- pref = 2
- elif patch[0:2] == "ac":
- patch_uri.append("ftp://ftp.kernel.org/pub/linux/kernel/people/alan/linux-%s/%s/patch-%s" % (major, base, pname))
- mmac = 2
- filepath[0:0] = [ filedir % (name[0] + "-ac") ]
- elif patch[0:2] == "mm":
- patch_uri.append("ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/%s/%s/%s/%s.bz2;patch=1;pname=%s" % (major, base, pname, pname, pname))
- mmac = 2
- filepath[0:0] = [ filedir % (name[0] + "-mm") ]
- else:
- raise bb.build.FuncFailed("nas100d-kernel: patch %s not recognized in %s" % (patch, '-'.join(pv)))
- filepath[0:0] = [ filedir % pname ]
- base = pname
-
- base = '.'.join(kernel)
- patch_uri[0] = "ftp://ftp.kernel.org/pub/linux/kernel/v%s/linux-%s.tar.bz2" % (major, base)
- filepath[-1:-1] = [ filedir % base ]
- if base != minor:
- filepath[-1:-1] = [ filedir % minor ]
- filepath[-1:-1] = [ filedir % major ]
-
- bb.data.setVar("N1K_SRCMAJ", major, d)
- # bb.note("N1K_SRCMAJ := %s" % major)
- bb.data.setVar("N1K_SRCVER", base, d)
- # bb.note("N1K_SRCVER := %s" % base)
- bb.data.setVar("N1K_SRCURI", ' '.join(patch_uri), d)
- # bb.note("N1K_SRCURI := %s" % ' '.join(patch_uri))
- bb.data.setVar("N1K_FILESPATH", ':'.join(filepath), d)
- # bb.note("N1K_FILESPATH := %s" % ' '.join(filepath))
- bb.data.setVar("DEFAULT_PREFERENCE", pref-mmac, d)
- # bb.note("DEFAULT_PREFERENCE := %s" % (pref-mmac))
-}
-
-# FILESPATH: this list is in order last-searched-first, therefore
-# the first entry is the *latest* and/or most specific
-FILESPATH = "${N1K_FILESPATH}:${FILE_DIRNAME}/nas100d-kernel/"
-
-# The working directory will be the 'base' version (which may not be the
-# same as implied by the PV variable because it corresponds to the prior
-# minor version for rc and pre patched versions).
-S = "${WORKDIR}/linux-${N1K_SRCVER}"
-
-# N1K_FILES is a list of additional files added to the source, these are
-# put in place before the patches, so may themselves be patched. The list
-# gives the path name relative to the base of the kernel source tree, the
-# base file name is used to *find* the file.
-N1K_FILES ?= ""
-
-N1K_SRCFILES = "${@( ' '.join([ ("file://" + n2k_file.split('/')[-1]) for n2k_file in bb.data.getVar("N1K_FILES",d,1).split(None) ]) )}"
-
-# N1K_PATCHES is a list of additional patches, the list specified
-# here comes from the ludeos-2.6.11.2 kernel, typically extra
-# patches will be required and very often patches will need to
-# be removed (i.e. the default is typically not very useful!)
-N1K_PATCHES ?= ""
-
-N1K_SUFFIX ?= "ludeos"
-
-SRC_URI = "${N1K_SRCURI}"
-SRC_URI += "${N1K_SRCFILES}"
-SRC_URI += "${N1K_PATCHES}"
-SRC_URI += "file://defconfig"
-
-COMPATIBLE_HOST = 'arm.*-linux'
-
-inherit kernel
-
-ARCH = "arm"
-KERNEL_IMAGETYPE = "zImage"
-# To specify the console set KERNEL_CONSOLE in the .bb file.
-# CMDLINE_ROOT contains the boot options, CMDLINE_KERNEL_OPTIONS
-# contains the things for a specific kernel.
-# CMDLINE_KERNEL_OPTIONS ?= "reboot=s"
-CMDLINE_KERNEL_OPTIONS ?=
-CMDLINE_ROOT = "root=/dev/mtdblock2 rw rootfstype=jffs2 mem=64M@0x00000000 init=/linuxrc"
-CMDLINE_DEBUG =
-CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_KERNEL_OPTIONS} ${CMDLINE_DEBUG} ${CMDLINE_CONSOLE}"
-
-# Add the architecture compiler flags to KERNEL_CC and KERNEL_LD as
-# required. Notice that this has to be done for each separately built
-# module as well!
-KERNEL_CC += "${TARGET_CC_KERNEL_ARCH}"
-KERNEL_LD += "${TARGET_LD_KERNEL_ARCH}"
-
-# Set EXTRAVERSION and LOCALVERSION to "" so that the kernel version
-# remains pinned to the x.y.z form, also turn off the directory
-# printing which provides almost all the output of an incremental build.
-EXTRA_OEMAKE += "EXTRAVERSION="
-EXTRA_OEMAKE += "LOCALVERSION="
-EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'"
-
-# Override KERNEL_RELEASE from kernel.bbclass to match:
-KERNEL_RELEASE = "${KERNEL_VERSION}"
-
-# By putting the added files in place in a separate task before
-# do_patch it becomes possible to patch these files.
-do_unpacklocal() {
- for f in ${N1K_FILES}
- do
- s="$(basename "$f")"
- install -m 0644 "${WORKDIR}/$s" "${S}/$f"
- done
-}
-
-addtask unpacklocal before do_patch after do_unpack
-
-do_configure_prepend() {
- rm -f ${S}/.config
- echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >>'${S}/.config'
- if test '${ARCH_BYTE_SEX}' = be
- then
- echo 'CONFIG_CPU_BIG_ENDIAN=y' >>'${S}/.config'
- fi
- if test '${SLUGOS_IMAGESEX}' = big-endian
- then
- echo 'CONFIG_JFFS2_BIG_ENDIAN=y' >>'${S}/.config'
- fi
- if test '${SLUGOS_IMAGESEX}' = little-endian
- then
- echo 'CONFIG_JFFS2_LITTLE_ENDIAN=y' >>'${S}/.config'
- fi
- sed -e '/CONFIG_CPU_BIG_ENDIAN/d' -e '/CONFIG_CMDLINE=/d' \
- -e '/CONFIG_JFFS2_NATIVE_ENDIAN=/d' \
- -e '/CONFIG_JFFS2_BIG_ENDIAN=/d' \
- -e '/CONFIG_JFFS2_LITTLE_ENDIAN=/d' \
- '${WORKDIR}/defconfig' >>'${S}/.config'
- rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \
- ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch
-}
-
-do_deploy[dirs] = "${S}"
-do_deploy() {
- install -d ${DEPLOY_DIR}/images
- install -m 644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${N1K_SUFFIX}
-}
-
-addtask deploy before do_build after do_compile
-
-python () {
- # Don't build the kernel unless we're targeting an nas100d
- mach = bb.data.getVar("MACHINE", d, 1)
- if mach != 'nas100d':
- raise bb.parse.SkipPackage("LudeOS only builds for the Iomega NAS 100d")
-}
diff --git a/packages/linux/nas100d-kernel/.mtn2git_empty b/packages/linux/nas100d-kernel/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/linux/nas100d-kernel/.mtn2git_empty
+++ /dev/null
diff --git a/packages/linux/nas100d-kernel/2.6.15/.mtn2git_empty b/packages/linux/nas100d-kernel/2.6.15/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/.mtn2git_empty
+++ /dev/null
diff --git a/packages/linux/nas100d-kernel/2.6.15/00-memory-h-page-shift.patch b/packages/linux/nas100d-kernel/2.6.15/00-memory-h-page-shift.patch
deleted file mode 100644
index 30d34952d5..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/00-memory-h-page-shift.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3218/1
-
-PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error:
-
-CC [M] sound/core/memory.o
-In file included from include/asm/memory.h:27,
-from include/asm/io.h:28,
-from sound/core/memory.c:24:
-include/asm/arch/memory.h: In function `__arch_adjust_zones':
-include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use
-in this function)
-
-This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback:
-
-Russell King wrote:
-> The error you see came up on SA1100. The best solution was to move
-> the __arch_adjust_zones() function out of line. I suggest ixp4xx
-> does the same.
-
-I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-
---- linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h~ 2005-12-30 05:18:27.000000000 +1030
-+++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h 2005-12-30 05:36:04.000000000 +1030
-@@ -16,31 +16,10 @@
-
- #ifndef __ASSEMBLY__
-
--/*
-- * Only first 64MB of memory can be accessed via PCI.
-- * We use GFP_DMA to allocate safe buffers to do map/unmap.
-- * This is really ugly and we need a better way of specifying
-- * DMA-capable regions of memory.
-- */
--static inline void __arch_adjust_zones(int node, unsigned long *zone_size,
-- unsigned long *zhole_size)
--{
-- unsigned int sz = SZ_64M >> PAGE_SHIFT;
--
-- /*
-- * Only adjust if > 64M on current system
-- */
-- if (node || (zone_size[0] <= sz))
-- return;
--
-- zone_size[1] = zone_size[0] - sz;
-- zone_size[0] = sz;
-- zhole_size[1] = zhole_size[0];
-- zhole_size[0] = 0;
--}
-+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
- #define arch_adjust_zones(node, size, holes) \
-- __arch_adjust_zones(node, size, holes)
-+ ixp4xx_adjust_zones(node, size, holes)
-
- #define ISA_DMA_THRESHOLD (SZ_64M - 1)
-
---- linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c~ 2005-12-30 05:16:03.000000000 +1030
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c 2005-12-30 05:43:55.000000000 +1030
-@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev,
- return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
- }
-
-+/*
-+ * Only first 64MB of memory can be accessed via PCI.
-+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
-+ * This is really ugly and we need a better way of specifying
-+ * DMA-capable regions of memory.
-+ */
-+void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
-+ unsigned long *zhole_size)
-+{
-+ unsigned int sz = SZ_64M >> PAGE_SHIFT;
-+
-+ /*
-+ * Only adjust if > 64M on current system
-+ */
-+ if (node || (zone_size[0] <= sz))
-+ return;
-+
-+ zone_size[1] = zone_size[0] - sz;
-+ zone_size[0] = sz;
-+ zhole_size[1] = zhole_size[0];
-+ zhole_size[0] = 0;
-+}
-+
- void __init ixp4xx_pci_preinit(void)
- {
- unsigned long processor_id;
diff --git a/packages/linux/nas100d-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch b/packages/linux/nas100d-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch
deleted file mode 100644
index 3fa0535abf..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-drivers/mtd/redboot.c: recognise a foreign byte sex partition table
-
-The RedBoot boot loader writes flash partition tables containing native
-byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an
-LE kernel from BE RedBoot) the current MTD driver fails to handle the
-partition table and therefore is unable to generate the correct partition
-map for the flash.
-
-The patch recognises that the FIS directory (the partition table) is
-byte-reversed by examining the partition table size, which is known to be
-one erase block (this is an assumption made elsewhere in redboot.c). If
-the size matches the erase block after byte swapping the value then
-byte-reversal is assumed, if not no further action is taken. The patched
-code is fail safe; should redboot.c be changed to support a partition table
-with a modified size field the test will fail and the partition table will
-be assumed to have the host byte sex.
-
-If byte-reversal is detected the patch byte swaps the remainder of the 32
-bit fields in the copy of the table; this copy is then used to set up the
-MTD partition map.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
-Modified slightly and
-Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
-Index: drivers/mtd/redboot.c
-===================================================================
-RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
-retrieving revision 1.18
-retrieving revision 1.19
-diff -u -p -r1.18 -r1.19
---- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
- i = numslots;
- break;
- }
-- if (!memcmp(buf[i].name, "FIS directory", 14))
-+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
-+ /* This is apparently the FIS directory entry for the
-+ * FIS directory itself. The FIS directory size is
-+ * one erase block; if the buf[i].size field is
-+ * swab32(erasesize) then we know we are looking at
-+ * a byte swapped FIS directory - swap all the entries!
-+ * (NOTE: this is 'size' not 'data_length'; size is
-+ * the full size of the entry.)
-+ */
-+ if (swab32(buf[i].size) == master->erasesize) {
-+ int j;
-+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
-+ /* The unsigned long fields were written with the
-+ * wrong byte sex, name and pad have no byte sex.
-+ */
-+ swab32s(&buf[j].flash_base);
-+ swab32s(&buf[j].mem_base);
-+ swab32s(&buf[j].size);
-+ swab32s(&buf[j].entry_point);
-+ swab32s(&buf[j].data_length);
-+ swab32s(&buf[j].desc_cksum);
-+ swab32s(&buf[j].file_cksum);
-+ }
-+ }
- break;
-+ }
- }
- if (i == numslots) {
- /* Didn't find it */
-
-
diff --git a/packages/linux/nas100d-kernel/2.6.15/15-jffs2-endian-config.patch b/packages/linux/nas100d-kernel/2.6.15/15-jffs2-endian-config.patch
deleted file mode 100644
index fdebb652a7..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/15-jffs2-endian-config.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- linux-2.6.15/fs/Kconfig~ 2006-01-03 13:51:10.000000000 +1030
-+++ linux-2.6.15/fs/Kconfig 2006-01-05 01:35:36.000000000 +1030
-@@ -1132,6 +1132,31 @@ config JFFS2_CMODE_SIZE
-
- endchoice
-
-+choice
-+ prompt "JFFS2 endianness"
-+ default JFFS2_NATIVE_ENDIAN
-+ depends on JFFS2_FS
-+ help
-+ You can set here the default endianness of JFFS2 from
-+ the available options. Don't touch if unsure.
-+
-+config JFFS2_NATIVE_ENDIAN
-+ bool "native endian"
-+ help
-+ Uses a native endian bytestream.
-+
-+config JFFS2_BIG_ENDIAN
-+ bool "big endian"
-+ help
-+ Uses a big endian bytestream.
-+
-+config JFFS2_LITTLE_ENDIAN
-+ bool "little endian"
-+ help
-+ Uses a little endian bytestream.
-+
-+endchoice
-+
- config CRAMFS
- tristate "Compressed ROM file system support (cramfs)"
- select ZLIB_INFLATE
---- linux-2.6.15/fs/jffs2/nodelist.h~ 2006-01-05 01:37:06.000000000 +1030
-+++ linux-2.6.15/fs/jffs2/nodelist.h 2006-01-05 01:37:54.000000000 +1030
-@@ -29,12 +29,10 @@
- #include "os-linux.h"
- #endif
-
--#define JFFS2_NATIVE_ENDIAN
--
- /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
- whatever OS we're actually running on here too. */
-
--#if defined(JFFS2_NATIVE_ENDIAN)
-+#if defined(CONFIG_JFFS2_NATIVE_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){x})
- #define cpu_to_je32(x) ((jint32_t){x})
- #define cpu_to_jemode(x) ((jmode_t){os_to_jffs2_mode(x)})
-@@ -42,7 +40,7 @@
- #define je16_to_cpu(x) ((x).v16)
- #define je32_to_cpu(x) ((x).v32)
- #define jemode_to_cpu(x) (jffs2_to_os_mode((x).m))
--#elif defined(JFFS2_BIG_ENDIAN)
-+#elif defined(CONFIG_JFFS2_BIG_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){cpu_to_be16(x)})
- #define cpu_to_je32(x) ((jint32_t){cpu_to_be32(x)})
- #define cpu_to_jemode(x) ((jmode_t){cpu_to_be32(os_to_jffs2_mode(x))})
-@@ -50,7 +48,7 @@
- #define je16_to_cpu(x) (be16_to_cpu(x.v16))
- #define je32_to_cpu(x) (be32_to_cpu(x.v32))
- #define jemode_to_cpu(x) (be32_to_cpu(jffs2_to_os_mode((x).m)))
--#elif defined(JFFS2_LITTLE_ENDIAN)
-+#elif defined(CONFIG_JFFS2_LITTLE_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){cpu_to_le16(x)})
- #define cpu_to_je32(x) ((jint32_t){cpu_to_le32(x)})
- #define cpu_to_jemode(x) ((jmode_t){cpu_to_le32(os_to_jffs2_mode(x))})
diff --git a/packages/linux/nas100d-kernel/2.6.15/40-rtc-class.patch b/packages/linux/nas100d-kernel/2.6.15/40-rtc-class.patch
deleted file mode 100644
index feea3f2f8b..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/40-rtc-class.patch
+++ /dev/null
@@ -1,2719 +0,0 @@
---- linux-nslu2.orig/include/linux/rtc.h 2006-01-03 15:31:18.000000000 +0100
-+++ linux-nslu2/include/linux/rtc.h 2006-01-03 15:34:24.000000000 +0100
-@@ -91,8 +91,81 @@ struct rtc_pll_info {
- #define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
- #define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
-
-+/* interrupt flags */
-+#define RTC_IRQF 0x80 /* any of the following is active */
-+#define RTC_PF 0x40
-+#define RTC_AF 0x20
-+#define RTC_UF 0x10
-+
- #ifdef __KERNEL__
-
-+#include <linux/device.h>
-+#include <linux/seq_file.h>
-+#include <linux/cdev.h>
-+#include <linux/poll.h>
-+
-+struct rtc_class_ops {
-+ int (*open)(struct device *);
-+ void (*release)(struct device *);
-+ int (*ioctl)(struct device *, unsigned int, unsigned long);
-+ int (*read_time)(struct device *, struct rtc_time *);
-+ int (*set_time)(struct device *, struct rtc_time *);
-+ int (*read_alarm)(struct device *, struct rtc_wkalrm *);
-+ int (*set_alarm)(struct device *, struct rtc_wkalrm *);
-+ int (*proc)(struct device *, struct seq_file *);
-+ int (*set_mmss)(struct device *, unsigned long secs);
-+ int (*irq_set_state)(struct device *, int enabled);
-+ int (*irq_set_freq)(struct device *, int freq);
-+};
-+
-+#define RTC_DEVICE_NAME_SIZE 20
-+struct rtc_task;
-+
-+struct rtc_device
-+{
-+ int id;
-+ struct module *owner;
-+ struct rw_semaphore lock;
-+ struct class_device class_dev;
-+ struct rtc_class_ops *ops;
-+ char name[RTC_DEVICE_NAME_SIZE];
-+
-+ struct cdev char_dev;
-+ struct semaphore char_sem;
-+
-+ unsigned long irq_data;
-+ spinlock_t irq_lock;
-+ wait_queue_head_t irq_queue;
-+ struct fasync_struct *async_queue;
-+
-+ spinlock_t irq_task_lock;
-+ struct rtc_task *irq_task;
-+ int irq_freq;
-+};
-+#define to_rtc_device(d) container_of(d, struct rtc_device, class_dev)
-+
-+extern struct rtc_device *rtc_device_register(char *name,
-+ struct device *dev,
-+ struct rtc_class_ops *ops,
-+ struct module *owner);
-+extern void rtc_device_unregister(struct rtc_device *rdev);
-+extern int rtc_interface_register(struct class_interface *intf);
-+
-+
-+extern int rtc_month_days(unsigned int month, unsigned int year);
-+extern int rtc_valid_tm(struct rtc_time *tm);
-+extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
-+extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
-+
-+extern int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm);
-+extern int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm);
-+extern int rtc_read_alarm(struct class_device *class_dev,
-+ struct rtc_wkalrm *alrm);
-+extern int rtc_set_alarm(struct class_device *class_dev,
-+ struct rtc_wkalrm *alrm);
-+extern void rtc_update_irq(struct class_device *class_dev,
-+ unsigned long num, unsigned long events);
-+
- typedef struct rtc_task {
- void (*func)(void *private_data);
- void *private_data;
---- linux-nslu2.orig/drivers/Kconfig 2006-01-03 15:31:19.000000000 +0100
-+++ linux-nslu2/drivers/Kconfig 2006-01-04 01:27:31.000000000 +0100
-@@ -66,4 +66,6 @@ source "drivers/infiniband/Kconfig"
-
- source "drivers/sn/Kconfig"
-
-+source "drivers/rtc/Kconfig"
-+
- endmenu
---- linux-nslu2.orig/drivers/Makefile 2006-01-03 15:33:32.000000000 +0100
-+++ linux-nslu2/drivers/Makefile 2006-01-04 01:27:31.000000000 +0100
-@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_GADGET) += usb/gadget/
- obj-$(CONFIG_GAMEPORT) += input/gameport/
- obj-$(CONFIG_INPUT) += input/
- obj-$(CONFIG_I2O) += message/
-+obj-y += rtc/
- obj-$(CONFIG_I2C) += i2c/
- obj-$(CONFIG_W1) += w1/
- obj-$(CONFIG_HWMON) += hwmon/
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/class.c 2006-01-03 15:45:19.000000000 +0100
-@@ -0,0 +1,141 @@
-+/*
-+ * RTC subsystem, base class
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * class skeleton from drivers/hwmon/hwmon.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/kdev_t.h>
-+#include <linux/idr.h>
-+
-+static DEFINE_IDR(rtc_idr);
-+static DECLARE_MUTEX(idr_lock);
-+struct class *rtc_class;
-+
-+static void rtc_device_release(struct class_device *class_dev)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+ down(&idr_lock);
-+ idr_remove(&rtc_idr, rtc->id);
-+ up(&idr_lock);
-+ kfree(rtc);
-+}
-+
-+/**
-+ * rtc_device_register - register w/ RTC class
-+ * @dev: the device to register
-+ *
-+ * rtc_device_unregister() must be called when the class device is no
-+ * longer needed.
-+ *
-+ * Returns the pointer to the new struct class device.
-+ */
-+struct rtc_device *rtc_device_register(char *name, struct device *dev,
-+ struct rtc_class_ops *ops,
-+ struct module *owner)
-+{
-+ struct rtc_device *rtc;
-+ int id, err;
-+
-+ if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+
-+ down(&idr_lock);
-+ err = idr_get_new(&rtc_idr, NULL, &id);
-+ up(&idr_lock);
-+
-+ if (err < 0)
-+ goto exit;
-+
-+ id = id & MAX_ID_MASK;
-+
-+ if ((rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL)) == NULL) {
-+ err = -ENOMEM;
-+ goto exit_idr;
-+ }
-+
-+ rtc->id = id;
-+ rtc->ops = ops;
-+ rtc->owner = owner;
-+ rtc->class_dev.dev = dev;
-+ rtc->class_dev.class = rtc_class;
-+ rtc->class_dev.release = rtc_device_release;
-+
-+ init_rwsem(&rtc->lock);
-+ spin_lock_init(&rtc->irq_lock);
-+ spin_lock_init(&rtc->irq_task_lock);
-+
-+ strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE);
-+ snprintf(rtc->class_dev.class_id, BUS_ID_SIZE, "rtc%d", id);
-+
-+ if ((err = class_device_register(&rtc->class_dev)))
-+ goto exit_kfree;
-+
-+ dev_info(dev, "rtc core: registered %s as %s\n",
-+ rtc->name, rtc->class_dev.class_id);
-+
-+ return rtc;
-+
-+exit_kfree:
-+ kfree(rtc);
-+
-+exit_idr:
-+ idr_remove(&rtc_idr, id);
-+
-+exit:
-+ return ERR_PTR(err);
-+}
-+EXPORT_SYMBOL_GPL(rtc_device_register);
-+
-+
-+/**
-+ * rtc_device_unregister - removes the previously registered RTC class device
-+ *
-+ * @rtc: the RTC class device to destroy
-+ */
-+void rtc_device_unregister(struct rtc_device *rtc)
-+{
-+ down_write(&rtc->lock);
-+ class_device_unregister(&rtc->class_dev);
-+}
-+EXPORT_SYMBOL_GPL(rtc_device_unregister);
-+
-+int rtc_interface_register(struct class_interface *intf)
-+{
-+ intf->class = rtc_class;
-+ return class_interface_register(intf);
-+}
-+EXPORT_SYMBOL_GPL(rtc_interface_register);
-+
-+static int __init rtc_init(void)
-+{
-+ rtc_class = class_create(THIS_MODULE, "rtc");
-+ if (IS_ERR(rtc_class)) {
-+ printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
-+ return PTR_ERR(rtc_class);
-+ }
-+ return 0;
-+}
-+
-+static void __exit rtc_exit(void)
-+{
-+ class_destroy(rtc_class);
-+}
-+
-+module_init(rtc_init);
-+module_exit(rtc_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towerteh.it>");
-+MODULE_DESCRIPTION("RTC class support");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/Kconfig 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,93 @@
-+#
-+# RTC class/drivers configuration
-+#
-+
-+menu "Real Time Clock"
-+
-+config RTC_CLASS
-+ tristate "RTC class"
-+ depends on EXPERIMENTAL
-+ default y
-+ help
-+ Generic RTC class support. If you say yes here, you will
-+ be allowed to plug one or more RTCs to your system. You will
-+ probably want to enable one of more of the interfaces below.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-class.
-+
-+comment "RTC interfaces"
-+ depends on RTC_CLASS
-+
-+config RTC_INTF_SYSFS
-+ tristate "sysfs"
-+ depends on RTC_CLASS && SYSFS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the sysfs
-+ interface, /sys/class/rtc/rtcX .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-sysfs.
-+
-+config RTC_INTF_PROC
-+ tristate "proc"
-+ depends on RTC_CLASS && PROC_FS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the proc
-+ interface, /proc/driver/rtc .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-proc.
-+
-+config RTC_INTF_DEV
-+ tristate "dev"
-+ depends on RTC_CLASS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the dev
-+ interface, /dev/rtc .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-dev.
-+
-+comment "RTC drivers"
-+ depends on RTC_CLASS
-+
-+config RTC_DRV_X1205
-+ tristate "Xicor/Intersil X1205 RTC chip"
-+ depends on RTC_CLASS && I2C
-+ help
-+ If you say yes here you get support for the
-+ Xicor/Intersil X1205 RTC chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-x1205.
-+
-+config RTC_DRV_DS1672
-+ tristate "Dallas/Maxim DS1672"
-+ depends on RTC_CLASS && I2C
-+ help
-+ If you say yes here you get support for the
-+ Dallas/Maxim DS1672 timekeeping chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-ds1672.
-+
-+config RTC_DRV_TEST
-+ tristate "Test driver/device"
-+ depends on RTC_CLASS
-+ help
-+ If you say yes here you get support for the
-+ RTC test driver. It's a software RTC which can be
-+ used to test the RTC subsystem APIs. It gets
-+ the time from the system clock.
-+ You want this driver only if you are doing development
-+ on the RTC subsystem. Please read the source code
-+ for further details.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-test.
-+
-+endmenu
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/Makefile 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for RTC class/drivers.
-+#
-+
-+obj-y += utils.o
-+obj-$(CONFIG_RTC_CLASS) += rtc-core.o
-+rtc-core-y := class.o interface.o
-+obj-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
-+obj-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
-+obj-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
-+
-+obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
-+obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
-+obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
-+
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/interface.c 2006-01-03 15:34:24.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * RTC subsystem, interface functions
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/rtc.h>
-+
-+extern struct class *rtc_class;
-+
-+int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm)
-+{
-+ int err = -EINVAL;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ if (ops->read_time) {
-+ memset(tm, 0, sizeof(struct rtc_time));
-+ err = ops->read_time(class_dev->dev, tm);
-+ }
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_read_time);
-+
-+int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm)
-+{
-+ int err;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ err = rtc_valid_tm(tm);
-+ if (err == 0 && ops->set_time)
-+ err = ops->set_time(class_dev->dev, tm);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_set_time);
-+
-+int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
-+{
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+ int err = -EINVAL;
-+
-+ if (ops->read_alarm) {
-+ memset(alarm, 0, sizeof(struct rtc_wkalrm));
-+ err = ops->read_alarm(class_dev->dev, alarm);
-+ }
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_read_alarm);
-+
-+int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
-+{
-+ int err = -EINVAL;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ if (ops->set_alarm)
-+ err = ops->set_alarm(class_dev->dev, alarm);
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_set_alarm);
-+
-+void rtc_update_irq(struct class_device *class_dev,
-+ unsigned long num, unsigned long events)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock(&rtc->irq_lock);
-+ rtc->irq_data = (rtc->irq_data + (num << 8)) | events;
-+ spin_unlock(&rtc->irq_lock);
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task)
-+ rtc->irq_task->func(rtc->irq_task->private_data);
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ wake_up_interruptible(&rtc->irq_queue);
-+ kill_fasync(&rtc->async_queue, SIGIO, POLL_IN);
-+}
-+EXPORT_SYMBOL(rtc_update_irq);
-+
-+struct class_device *rtc_open(char *name)
-+{
-+ struct class_device *class_dev = NULL,
-+ *class_dev_tmp;
-+
-+ down(&rtc_class->sem);
-+ list_for_each_entry(class_dev_tmp, &rtc_class->children, node) {
-+ if (strncmp(class_dev_tmp->class_id, name, BUS_ID_SIZE) == 0) {
-+ class_dev = class_dev_tmp;
-+ break;
-+ }
-+ }
-+ up(&rtc_class->sem);
-+
-+ return class_dev;
-+}
-+EXPORT_SYMBOL(rtc_open);
-+
-+void rtc_close(struct class_device *class_dev)
-+{
-+}
-+EXPORT_SYMBOL(rtc_close);
-+
-+int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task)
-+{
-+ int retval = -EBUSY;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ if (task == NULL || task->func == NULL)
-+ return -EINVAL;
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task == NULL) {
-+ rtc->irq_task = task;
-+ retval = 0;
-+ }
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ return retval;
-+}
-+EXPORT_SYMBOL(rtc_irq_register);
-+
-+void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task == task)
-+ rtc->irq_task = NULL;
-+ spin_unlock(&rtc->irq_task_lock);
-+}
-+EXPORT_SYMBOL(rtc_irq_unregister);
-+
-+int rtc_irq_set_state(struct class_device *class_dev, struct rtc_task *task, int enabled)
-+{
-+ int err = 0;
-+ unsigned long flags;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock_irqsave(&rtc->irq_task_lock, flags);
-+ if (rtc->irq_task != task)
-+ err = -ENXIO;
-+ spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
-+
-+ if (err == 0)
-+ err = rtc->ops->irq_set_state(class_dev->dev, enabled);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_irq_set_state);
-+
-+int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int freq)
-+{
-+ int err = 0, tmp = 0;
-+ unsigned long flags;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ /* allowed range is 2-8192 */
-+ if (freq < 2 || freq > 8192)
-+ return -EINVAL;
-+
-+/* if ((freq > rtc_max_user_freq) && (!capable(CAP_SYS_RESOURCE)))
-+ return -EACCES;
-+*/
-+ /* check if freq is a power of 2 */
-+ while (freq > (1 << tmp))
-+ tmp++;
-+
-+ if (freq != (1 << tmp))
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&rtc->irq_task_lock, flags);
-+ if (rtc->irq_task != task)
-+ err = -ENXIO;
-+ spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
-+
-+ if (err == 0) {
-+ if ((err = rtc->ops->irq_set_freq(class_dev->dev, freq)) == 0)
-+ rtc->irq_freq = freq;
-+ }
-+ return err;
-+
-+}
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/utils.c 2006-01-03 15:34:24.000000000 +0100
-@@ -0,0 +1,97 @@
-+/*
-+ * RTC subsystem, utility functions
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/rtc.h>
-+
-+static const unsigned char rtc_days_in_month[] = {
-+ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-+};
-+
-+#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
-+#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
-+
-+int rtc_month_days(unsigned int month, unsigned int year)
-+{
-+ return rtc_days_in_month[month] + (LEAP_YEAR(year) && month == 1);
-+}
-+EXPORT_SYMBOL(rtc_month_days);
-+
-+/*
-+ * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
-+ */
-+void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
-+{
-+ int days, month, year;
-+
-+ days = time / 86400;
-+ time -= days * 86400;
-+
-+ tm->tm_wday = (days + 4) % 7;
-+
-+ year = 1970 + days / 365;
-+ days -= (year - 1970) * 365
-+ + LEAPS_THRU_END_OF(year - 1)
-+ - LEAPS_THRU_END_OF(1970 - 1);
-+ if (days < 0) {
-+ year -= 1;
-+ days += 365 + LEAP_YEAR(year);
-+ }
-+ tm->tm_year = year - 1900;
-+ tm->tm_yday = days + 1;
-+
-+ for (month = 0; month < 11; month++) {
-+ int newdays;
-+
-+ newdays = days - rtc_month_days(month, year);
-+ if (newdays < 0)
-+ break;
-+ days = newdays;
-+ }
-+ tm->tm_mon = month;
-+ tm->tm_mday = days + 1;
-+
-+ tm->tm_hour = time / 3600;
-+ time -= tm->tm_hour * 3600;
-+ tm->tm_min = time / 60;
-+ tm->tm_sec = time - tm->tm_min * 60;
-+}
-+EXPORT_SYMBOL(rtc_time_to_tm);
-+
-+/*
-+ * Does the rtc_time represent a valid date/time?
-+ */
-+int rtc_valid_tm(struct rtc_time *tm)
-+{
-+ if (tm->tm_year < 70 ||
-+ tm->tm_mon >= 12 ||
-+ tm->tm_mday < 1 ||
-+ tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900) ||
-+ tm->tm_hour >= 24 ||
-+ tm->tm_min >= 60 ||
-+ tm->tm_sec >= 60)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(rtc_valid_tm);
-+
-+/*
-+ * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
-+ */
-+int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
-+{
-+ *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+ return 0;
-+}
-+EXPORT_SYMBOL(rtc_tm_to_time);
---- linux-nslu2.orig/arch/arm/Kconfig 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/arch/arm/Kconfig 2006-01-04 01:27:31.000000000 +0100
-@@ -750,6 +750,8 @@ source "drivers/usb/Kconfig"
-
- source "drivers/mmc/Kconfig"
-
-+source "drivers/rtc/Kconfig"
-+
- endmenu
-
- source "fs/Kconfig"
---- linux-nslu2.orig/arch/arm/common/rtctime.c 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/arch/arm/common/rtctime.c 2006-01-04 01:27:09.000000000 +0100
-@@ -40,89 +40,6 @@ static struct rtc_ops *rtc_ops;
-
- #define rtc_epoch 1900UL
-
--static const unsigned char days_in_month[] = {
-- 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
--};
--
--#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
--#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
--
--static int month_days(unsigned int month, unsigned int year)
--{
-- return days_in_month[month] + (LEAP_YEAR(year) && month == 1);
--}
--
--/*
-- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
-- */
--void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
--{
-- int days, month, year;
--
-- days = time / 86400;
-- time -= days * 86400;
--
-- tm->tm_wday = (days + 4) % 7;
--
-- year = 1970 + days / 365;
-- days -= (year - 1970) * 365
-- + LEAPS_THRU_END_OF(year - 1)
-- - LEAPS_THRU_END_OF(1970 - 1);
-- if (days < 0) {
-- year -= 1;
-- days += 365 + LEAP_YEAR(year);
-- }
-- tm->tm_year = year - 1900;
-- tm->tm_yday = days + 1;
--
-- for (month = 0; month < 11; month++) {
-- int newdays;
--
-- newdays = days - month_days(month, year);
-- if (newdays < 0)
-- break;
-- days = newdays;
-- }
-- tm->tm_mon = month;
-- tm->tm_mday = days + 1;
--
-- tm->tm_hour = time / 3600;
-- time -= tm->tm_hour * 3600;
-- tm->tm_min = time / 60;
-- tm->tm_sec = time - tm->tm_min * 60;
--}
--EXPORT_SYMBOL(rtc_time_to_tm);
--
--/*
-- * Does the rtc_time represent a valid date/time?
-- */
--int rtc_valid_tm(struct rtc_time *tm)
--{
-- if (tm->tm_year < 70 ||
-- tm->tm_mon >= 12 ||
-- tm->tm_mday < 1 ||
-- tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) ||
-- tm->tm_hour >= 24 ||
-- tm->tm_min >= 60 ||
-- tm->tm_sec >= 60)
-- return -EINVAL;
--
-- return 0;
--}
--EXPORT_SYMBOL(rtc_valid_tm);
--
--/*
-- * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
-- */
--int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
--{
-- *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-- tm->tm_hour, tm->tm_min, tm->tm_sec);
--
-- return 0;
--}
--EXPORT_SYMBOL(rtc_tm_to_time);
--
- /*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
-@@ -141,13 +58,13 @@ void rtc_next_alarm_time(struct rtc_time
- next->tm_sec = alrm->tm_sec;
- }
-
--static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)
-+static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
- {
- memset(tm, 0, sizeof(struct rtc_time));
- return ops->read_time(tm);
- }
-
--static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
-+static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
- {
- int ret;
-
-@@ -158,7 +75,7 @@ static inline int rtc_set_time(struct rt
- return ret;
- }
-
--static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-+static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
- {
- int ret = -EINVAL;
- if (ops->read_alarm) {
-@@ -168,7 +85,7 @@ static inline int rtc_read_alarm(struct
- return ret;
- }
-
--static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-+static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
- {
- int ret = -EINVAL;
- if (ops->set_alarm)
-@@ -256,7 +173,7 @@ static int rtc_ioctl(struct inode *inode
-
- switch (cmd) {
- case RTC_ALM_READ:
-- ret = rtc_read_alarm(ops, &alrm);
-+ ret = rtc_arm_read_alarm(ops, &alrm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
-@@ -278,11 +195,11 @@ static int rtc_ioctl(struct inode *inode
- alrm.time.tm_wday = -1;
- alrm.time.tm_yday = -1;
- alrm.time.tm_isdst = -1;
-- ret = rtc_set_alarm(ops, &alrm);
-+ ret = rtc_arm_set_alarm(ops, &alrm);
- break;
-
- case RTC_RD_TIME:
-- ret = rtc_read_time(ops, &tm);
-+ ret = rtc_arm_read_time(ops, &tm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &tm, sizeof(tm));
-@@ -300,7 +217,7 @@ static int rtc_ioctl(struct inode *inode
- ret = -EFAULT;
- break;
- }
-- ret = rtc_set_time(ops, &tm);
-+ ret = rtc_arm_set_time(ops, &tm);
- break;
-
- case RTC_EPOCH_SET:
-@@ -331,11 +248,11 @@ static int rtc_ioctl(struct inode *inode
- ret = -EFAULT;
- break;
- }
-- ret = rtc_set_alarm(ops, &alrm);
-+ ret = rtc_arm_set_alarm(ops, &alrm);
- break;
-
- case RTC_WKALM_RD:
-- ret = rtc_read_alarm(ops, &alrm);
-+ ret = rtc_arm_read_alarm(ops, &alrm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &alrm, sizeof(alrm));
-@@ -425,7 +342,7 @@ static int rtc_read_proc(char *page, cha
- struct rtc_time tm;
- char *p = page;
-
-- if (rtc_read_time(ops, &tm) == 0) {
-+ if (rtc_arm_read_time(ops, &tm) == 0) {
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n"
-@@ -435,7 +352,7 @@ static int rtc_read_proc(char *page, cha
- rtc_epoch);
- }
-
-- if (rtc_read_alarm(ops, &alrm) == 0) {
-+ if (rtc_arm_read_alarm(ops, &alrm) == 0) {
- p += sprintf(p, "alrm_time\t: ");
- if ((unsigned int)alrm.time.tm_hour <= 24)
- p += sprintf(p, "%02d:", alrm.time.tm_hour);
---- linux-nslu2.orig/include/asm-arm/rtc.h 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/include/asm-arm/rtc.h 2006-01-04 01:27:09.000000000 +0100
-@@ -25,9 +25,6 @@ struct rtc_ops {
- int (*proc)(char *buf);
- };
-
--void rtc_time_to_tm(unsigned long, struct rtc_time *);
--int rtc_tm_to_time(struct rtc_time *, unsigned long *);
--int rtc_valid_tm(struct rtc_time *);
- void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *);
- void rtc_update(unsigned long, unsigned long);
- int register_rtc(struct rtc_ops *);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-sysfs.c 2006-01-04 01:27:12.000000000 +0100
-@@ -0,0 +1,125 @@
-+/*
-+ * RTC subsystem, sysfs interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+
-+/* device attributes */
-+
-+static ssize_t rtc_sysfs_show_name(struct class_device *dev, char *buf)
-+{
-+ return sprintf(buf, "%s\n", to_rtc_device(dev)->name);
-+}
-+static CLASS_DEVICE_ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL);
-+
-+static ssize_t rtc_sysfs_show_date(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ retval = sprintf(buf, "%04d-%02d-%02d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL);
-+
-+static ssize_t rtc_sysfs_show_time(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ retval = sprintf(buf, "%02d:%02d:%02d\n",
-+ tm.tm_hour, tm.tm_min, tm.tm_sec);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL);
-+
-+static ssize_t rtc_sysfs_show_since_epoch(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ unsigned long time;
-+ rtc_tm_to_time(&tm, &time);
-+ retval = sprintf(buf, "%lu\n", time);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL);
-+
-+/* insertion/removal hooks */
-+
-+static int __devinit rtc_sysfs_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ class_device_create_file(class_dev, &class_device_attr_name);
-+ class_device_create_file(class_dev, &class_device_attr_date);
-+ class_device_create_file(class_dev, &class_device_attr_time);
-+ class_device_create_file(class_dev, &class_device_attr_since_epoch);
-+ dev_info(class_dev->dev, "rtc intf: sysfs\n");
-+ return 0;
-+}
-+
-+static void rtc_sysfs_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ class_device_remove_file(class_dev, &class_device_attr_name);
-+ class_device_remove_file(class_dev, &class_device_attr_date);
-+ class_device_remove_file(class_dev, &class_device_attr_time);
-+ class_device_remove_file(class_dev, &class_device_attr_since_epoch);
-+}
-+
-+/* interface registration */
-+
-+struct class_interface rtc_sysfs_interface = {
-+ .add = &rtc_sysfs_add_device,
-+ .remove = &rtc_sysfs_remove_device,
-+};
-+
-+static int __init rtc_sysfs_init(void)
-+{
-+ return rtc_interface_register(&rtc_sysfs_interface);
-+}
-+
-+static void __exit rtc_sysfs_exit(void)
-+{
-+ class_interface_unregister(&rtc_sysfs_interface);
-+}
-+
-+module_init(rtc_sysfs_init);
-+module_exit(rtc_sysfs_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class sysfs interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-proc.c 2006-01-04 01:27:14.000000000 +0100
-@@ -0,0 +1,158 @@
-+/*
-+ * RTC subsystem, proc interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/proc_fs.h>
-+#include <linux/seq_file.h>
-+
-+static struct class_device *rtc_dev = NULL;
-+static DECLARE_MUTEX(rtc_sem);
-+
-+static int rtc_proc_show(struct seq_file *seq, void *offset)
-+{
-+ struct class_device *class_dev = seq->private;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+ struct rtc_wkalrm alrm;
-+ struct rtc_time tm;
-+
-+ if (rtc_read_time(class_dev, &tm) == 0) {
-+ seq_printf(seq,
-+ "rtc_time\t: %02d:%02d:%02d\n"
-+ "rtc_date\t: %04d-%02d-%02d\n",
-+ tm.tm_hour, tm.tm_min, tm.tm_sec,
-+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-+ }
-+
-+ if (rtc_read_alarm(class_dev, &alrm) == 0) {
-+ seq_printf(seq, "alrm_time\t: ");
-+ if ((unsigned int)alrm.time.tm_hour <= 24)
-+ seq_printf(seq, "%02d:", alrm.time.tm_hour);
-+ else
-+ seq_printf(seq, "**:");
-+ if ((unsigned int)alrm.time.tm_min <= 59)
-+ seq_printf(seq, "%02d:", alrm.time.tm_min);
-+ else
-+ seq_printf(seq, "**:");
-+ if ((unsigned int)alrm.time.tm_sec <= 59)
-+ seq_printf(seq, "%02d\n", alrm.time.tm_sec);
-+ else
-+ seq_printf(seq, "**\n");
-+
-+ seq_printf(seq, "alrm_date\t: ");
-+ if ((unsigned int)alrm.time.tm_year <= 200)
-+ seq_printf(seq, "%04d-", alrm.time.tm_year + 1900);
-+ else
-+ seq_printf(seq, "****-");
-+ if ((unsigned int)alrm.time.tm_mon <= 11)
-+ seq_printf(seq, "%02d-", alrm.time.tm_mon + 1);
-+ else
-+ seq_printf(seq, "**-");
-+ if ((unsigned int)alrm.time.tm_mday <= 31)
-+ seq_printf(seq, "%02d\n", alrm.time.tm_mday);
-+ else
-+ seq_printf(seq, "**\n");
-+ seq_printf(seq, "alrm_wakeup\t: %s\n",
-+ alrm.enabled ? "yes" : "no");
-+ seq_printf(seq, "alrm_pending\t: %s\n",
-+ alrm.pending ? "yes" : "no");
-+ }
-+
-+ if (ops->proc)
-+ ops->proc(class_dev->dev, seq);
-+
-+ return 0;
-+}
-+
-+static int rtc_proc_open(struct inode *inode, struct file *file)
-+{
-+ struct class_device *class_dev = PDE(inode)->data;
-+
-+ if (!try_module_get(THIS_MODULE))
-+ return -ENODEV;
-+
-+ return single_open(file, rtc_proc_show, class_dev);
-+}
-+
-+static int rtc_proc_release(struct inode *inode, struct file *file)
-+{
-+ int res = single_release(inode, file);
-+ module_put(THIS_MODULE);
-+ return res;
-+}
-+
-+static struct file_operations rtc_proc_fops = {
-+ .open = rtc_proc_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = rtc_proc_release,
-+};
-+
-+static int rtc_proc_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ down(&rtc_sem);
-+ if (rtc_dev == NULL) {
-+ struct proc_dir_entry *ent;
-+
-+ rtc_dev = class_dev;
-+
-+ if ((ent = create_proc_entry("driver/rtc", 0, NULL))) {
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ ent->proc_fops = &rtc_proc_fops;
-+ ent->owner = rtc->owner;
-+ ent->data = class_dev;
-+
-+ dev_info(class_dev->dev, "rtc intf: proc\n");
-+ }
-+ else
-+ rtc_dev = NULL;
-+ }
-+ up(&rtc_sem);
-+
-+ return 0;
-+}
-+
-+static void rtc_proc_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ down(&rtc_sem);
-+ if (rtc_dev == class_dev) {
-+ remove_proc_entry("driver/rtc", NULL);
-+ rtc_dev = NULL;
-+ }
-+ up(&rtc_sem);
-+}
-+
-+struct class_interface rtc_proc_interface = {
-+ .add = &rtc_proc_add_device,
-+ .remove = &rtc_proc_remove_device,
-+};
-+
-+static int __init rtc_proc_init(void)
-+{
-+ return rtc_interface_register(&rtc_proc_interface);
-+}
-+
-+static void __exit rtc_proc_exit(void)
-+{
-+ class_interface_unregister(&rtc_proc_interface);
-+}
-+
-+module_init(rtc_proc_init);
-+module_exit(rtc_proc_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class proc interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-dev.c 2006-01-04 01:27:15.000000000 +0100
-@@ -0,0 +1,372 @@
-+/*
-+ * RTC subsystem, dev interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+
-+static dev_t rtc_devt;
-+
-+#define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */
-+
-+static int rtc_dev_open(struct inode *inode, struct file *file)
-+{
-+ int err;
-+ struct rtc_device *rtc = container_of(inode->i_cdev,
-+ struct rtc_device, char_dev);
-+ struct rtc_class_ops *ops = rtc->ops;
-+
-+ /* We keep the lock as long as the device is in use
-+ * and return immediately if busy
-+ */
-+ if (down_trylock(&rtc->char_sem))
-+ return -EBUSY;
-+
-+ file->private_data = &rtc->class_dev;
-+
-+ err = ops->open ? ops->open(rtc->class_dev.dev) : 0;
-+ if (err == 0) {
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ return 0;
-+ }
-+
-+ /* something has gone wrong, release the lock */
-+ up(&rtc->char_sem);
-+ return err;
-+}
-+
-+
-+static ssize_t
-+rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+
-+ DECLARE_WAITQUEUE(wait, current);
-+ unsigned long data;
-+ ssize_t ret;
-+
-+ if (count < sizeof(unsigned long))
-+ return -EINVAL;
-+
-+ add_wait_queue(&rtc->irq_queue, &wait);
-+ do {
-+ __set_current_state(TASK_INTERRUPTIBLE);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ data = rtc->irq_data;
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ if (data != 0) {
-+ ret = 0;
-+ break;
-+ }
-+ if (file->f_flags & O_NONBLOCK) {
-+ ret = -EAGAIN;
-+ break;
-+ }
-+ if (signal_pending(current)) {
-+ ret = -ERESTARTSYS;
-+ break;
-+ }
-+ schedule();
-+ } while (1);
-+ set_current_state(TASK_RUNNING);
-+ remove_wait_queue(&rtc->irq_queue, &wait);
-+
-+ if (ret == 0) {
-+ ret = put_user(data, (unsigned long __user *)buf);
-+ if (ret == 0)
-+ ret = sizeof(unsigned long);
-+ }
-+ return ret;
-+}
-+
-+static unsigned int rtc_dev_poll(struct file *file, poll_table *wait)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+ unsigned long data;
-+
-+ poll_wait(file, &rtc->irq_queue, wait);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ data = rtc->irq_data;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ return data != 0 ? POLLIN | POLLRDNORM : 0;
-+}
-+
-+static int rtc_dev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int err = 0;
-+ struct class_device *class_dev = file->private_data;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+ struct rtc_class_ops *ops = rtc->ops;
-+ struct rtc_time tm;
-+ struct rtc_wkalrm alarm;
-+ void __user *uarg = (void __user *) arg;
-+
-+ /* avoid conflicting IRQ users */
-+ if (cmd == RTC_PIE_ON || cmd == RTC_PIE_OFF || cmd == RTC_IRQP_SET) {
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task)
-+ err = -EBUSY;
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ if (err < 0)
-+ return err;
-+ }
-+
-+ /* try the driver's ioctl interface */
-+ if (ops->ioctl) {
-+ err = ops->ioctl(class_dev->dev, cmd, arg);
-+ if (err < 0 && err != -EINVAL)
-+ return err;
-+ }
-+
-+ /* if the driver does not provide the ioctl interface
-+ * or if that particular ioctl was not implemented
-+ * (-EINVAL), we will try to emulate here.
-+ */
-+
-+ switch (cmd) {
-+ case RTC_ALM_READ:
-+ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &alarm.time, sizeof(tm))))
-+ return -EFAULT;
-+ break;
-+
-+ case RTC_ALM_SET:
-+ if ((err = copy_from_user(&alarm.time, uarg, sizeof(tm))))
-+ return -EFAULT;
-+
-+ alarm.enabled = 0;
-+ alarm.pending = 0;
-+ alarm.time.tm_mday = -1;
-+ alarm.time.tm_mon = -1;
-+ alarm.time.tm_year = -1;
-+ alarm.time.tm_wday = -1;
-+ alarm.time.tm_yday = -1;
-+ alarm.time.tm_isdst = -1;
-+ err = rtc_set_alarm(class_dev, &alarm);
-+ break;
-+
-+ case RTC_RD_TIME:
-+ if ((err = rtc_read_time(class_dev, &tm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &tm, sizeof(tm))))
-+ return -EFAULT;
-+ break;
-+
-+ case RTC_SET_TIME:
-+ if (!capable(CAP_SYS_TIME))
-+ return -EACCES;
-+
-+ if ((err = copy_from_user(&tm, uarg, sizeof(tm))))
-+ return -EFAULT;
-+
-+ err = rtc_set_time(class_dev, &tm);
-+ break;
-+#if 0
-+ case RTC_EPOCH_SET:
-+#ifndef rtc_epoch
-+ /*
-+ * There were no RTC clocks before 1900.
-+ */
-+ if (arg < 1900) {
-+ err = -EINVAL;
-+ break;
-+ }
-+ if (!capable(CAP_SYS_TIME)) {
-+ err = -EACCES;
-+ break;
-+ }
-+ rtc_epoch = arg;
-+ err = 0;
-+#endif
-+ break;
-+
-+ case RTC_EPOCH_READ:
-+ err = put_user(rtc_epoch, (unsigned long __user *)uarg);
-+ break;
-+#endif
-+ case RTC_WKALM_SET:
-+ if ((err = copy_from_user(&alarm, uarg, sizeof(alarm))))
-+ return -EFAULT;
-+
-+ err = rtc_set_alarm(class_dev, &alarm);
-+ break;
-+
-+ case RTC_WKALM_RD:
-+ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &alarm, sizeof(alarm))))
-+ return -EFAULT;
-+ break;
-+
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ return err;
-+}
-+
-+static int rtc_dev_release(struct inode *inode, struct file *file)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+
-+ if (rtc->ops->release)
-+ rtc->ops->release(rtc->class_dev.dev);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ up(&rtc->char_sem);
-+ return 0;
-+}
-+
-+static int rtc_dev_fasync(int fd, struct file *file, int on)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+ return fasync_helper(fd, file, on, &rtc->async_queue);
-+}
-+
-+static struct file_operations rtc_dev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .read = rtc_dev_read,
-+ .poll = rtc_dev_poll,
-+ .ioctl = rtc_dev_ioctl,
-+ .open = rtc_dev_open,
-+ .release = rtc_dev_release,
-+ .fasync = rtc_dev_fasync,
-+};
-+
-+static ssize_t rtc_dev_show_dev(struct class_device *class_dev, char *buf)
-+{
-+ return print_dev_t(buf, class_dev->devt);
-+}
-+static CLASS_DEVICE_ATTR(dev, S_IRUGO, rtc_dev_show_dev, NULL);
-+
-+/* insertion/removal hooks */
-+
-+static int rtc_dev_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ if (rtc->id >= RTC_DEV_MAX) {
-+ dev_err(class_dev->dev, "too many RTCs\n");
-+ return -EINVAL;
-+ }
-+
-+ init_MUTEX(&rtc->char_sem);
-+ spin_lock_init(&rtc->irq_lock);
-+ init_waitqueue_head(&rtc->irq_queue);
-+
-+ cdev_init(&rtc->char_dev, &rtc_dev_fops);
-+ rtc->char_dev.owner = rtc->owner;
-+ class_dev->devt = MKDEV(MAJOR(rtc_devt), rtc->id);
-+
-+ if (cdev_add(&rtc->char_dev, class_dev->devt, 1)) {
-+ cdev_del(&rtc->char_dev);
-+
-+ dev_err(class_dev->dev,
-+ "failed to add char device %d:%d\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+
-+ class_dev->devt = MKDEV(0, 0);
-+ return -ENODEV;
-+ }
-+
-+ class_device_create_file(class_dev, &class_device_attr_dev);
-+
-+ dev_info(class_dev->dev, "rtc intf: dev (%d:%d)\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+
-+ kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
-+
-+ return 0;
-+}
-+
-+static void rtc_dev_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ class_device_remove_file(class_dev, &class_device_attr_dev);
-+
-+ if (MAJOR(class_dev->devt)) {
-+ dev_dbg(class_dev->dev, "removing char %d:%d\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+ cdev_del(&rtc->char_dev);
-+
-+ kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
-+
-+ class_dev->devt = MKDEV(0, 0);
-+ }
-+}
-+
-+/* interface registration */
-+
-+struct class_interface rtc_dev_interface = {
-+ .add = &rtc_dev_add_device,
-+ .remove = &rtc_dev_remove_device,
-+};
-+
-+static int __init rtc_dev_init(void)
-+{
-+ int err;
-+
-+ if ((err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc")) < 0) {
-+ printk(KERN_ERR "%s: failed to allocate char dev region\n",
-+ __FILE__);
-+ return err;
-+ }
-+
-+ if ((err = rtc_interface_register(&rtc_dev_interface)) < 0) {
-+ printk(KERN_ERR "%s: failed to register the interface\n",
-+ __FILE__);
-+ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-+ return err;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit rtc_dev_exit(void)
-+{
-+ class_interface_unregister(&rtc_dev_interface);
-+
-+ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-+}
-+
-+module_init(rtc_dev_init);
-+module_exit(rtc_dev_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class dev interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-x1205.c 2006-01-04 01:27:17.000000000 +0100
-@@ -0,0 +1,725 @@
-+/*
-+ * An i2c driver for the Xicor/Intersil X1205 RTC
-+ * Copyright 2004 Karen Spearel
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * please send all reports to:
-+ * kas11 at tampabay dot rr dot com
-+ * a dot zummo at towertech dot it
-+ *
-+ * based on a lot of other RTC drivers.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/string.h>
-+#include <linux/bcd.h>
-+#include <linux/rtc.h>
-+#include <linux/delay.h>
-+
-+#define DRV_VERSION "1.0.5"
-+
-+/* Addresses to scan: none. This chip is located at
-+ * 0x6f and uses a two bytes register addressing.
-+ * Two bytes need to be written to read a single register,
-+ * while most other chips just require one and take the second
-+ * one as the data to be written. To prevent corrupting
-+ * unknown chips, the user must explicitely set the probe parameter.
-+ */
-+
-+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+/* offsets into CCR area */
-+
-+#define CCR_SEC 0
-+#define CCR_MIN 1
-+#define CCR_HOUR 2
-+#define CCR_MDAY 3
-+#define CCR_MONTH 4
-+#define CCR_YEAR 5
-+#define CCR_WDAY 6
-+#define CCR_Y2K 7
-+
-+#define X1205_REG_SR 0x3F /* status register */
-+#define X1205_REG_Y2K 0x37
-+#define X1205_REG_DW 0x36
-+#define X1205_REG_YR 0x35
-+#define X1205_REG_MO 0x34
-+#define X1205_REG_DT 0x33
-+#define X1205_REG_HR 0x32
-+#define X1205_REG_MN 0x31
-+#define X1205_REG_SC 0x30
-+#define X1205_REG_DTR 0x13
-+#define X1205_REG_ATR 0x12
-+#define X1205_REG_INT 0x11
-+#define X1205_REG_0 0x10
-+#define X1205_REG_Y2K1 0x0F
-+#define X1205_REG_DWA1 0x0E
-+#define X1205_REG_YRA1 0x0D
-+#define X1205_REG_MOA1 0x0C
-+#define X1205_REG_DTA1 0x0B
-+#define X1205_REG_HRA1 0x0A
-+#define X1205_REG_MNA1 0x09
-+#define X1205_REG_SCA1 0x08
-+#define X1205_REG_Y2K0 0x07
-+#define X1205_REG_DWA0 0x06
-+#define X1205_REG_YRA0 0x05
-+#define X1205_REG_MOA0 0x04
-+#define X1205_REG_DTA0 0x03
-+#define X1205_REG_HRA0 0x02
-+#define X1205_REG_MNA0 0x01
-+#define X1205_REG_SCA0 0x00
-+
-+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF 0x01 /* Clock failure */
-+#define X1205_SR_WEL 0x02 /* Write Enable Latch */
-+#define X1205_SR_RWEL 0x04 /* Register Write Enable */
-+
-+#define X1205_DTR_DTR0 0x01
-+#define X1205_DTR_DTR1 0x02
-+#define X1205_DTR_DTR2 0x04
-+
-+#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
-+
-+/* Prototypes */
-+static int x1205_attach(struct i2c_adapter *adapter);
-+static int x1205_detach(struct i2c_client *client);
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-+
-+static struct i2c_driver x1205_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "x1205",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &x1205_attach,
-+ .detach_client = &x1205_detach,
-+};
-+
-+/*
-+ * In the routines that deal directly with the x1205 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is initialized as 2000. Time is set to UTC.
-+ */
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ unsigned char reg_base)
-+{
-+ unsigned char dt_addr[2] = { 0, reg_base };
-+
-+ unsigned char buf[8];
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, dt_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 8, buf }, /* read date */
-+ };
-+
-+ /* read date registers */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
-+ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3],
-+ buf[4], buf[5], buf[6], buf[7]);
-+
-+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
-+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
-+ tm->tm_year = BCD2BIN(buf[CCR_YEAR])
-+ + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
-+ tm->tm_wday = buf[CCR_WDAY];
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ return 0;
-+}
-+
-+static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
-+{
-+ static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, sr }, /* read status */
-+ };
-+
-+ /* read status register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base)
-+{
-+ int i, xfer;
-+ unsigned char buf[8];
-+
-+ static const unsigned char wel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL };
-+
-+ static const unsigned char rwel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL | X1205_SR_RWEL };
-+
-+ static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+
-+ dev_dbg(&client->dev,
-+ "%s: secs=%d, mins=%d, hours=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour);
-+
-+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-+
-+ /* set hour and 24hr bit */
-+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-+
-+ /* should we also set the date? */
-+ if (datetoo) {
-+ dev_dbg(&client->dev,
-+ "%s: mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+
-+ /* month, 1 - 12 */
-+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);
-+
-+ /* year, since the rtc epoch*/
-+ buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
-+ buf[CCR_WDAY] = tm->tm_wday & 0x07;
-+ buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
-+ }
-+
-+ /* this sequence is required to unlock the chip */
-+ xfer = i2c_master_send(client, wel, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ xfer = i2c_master_send(client, rwel, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ /* write register's data */
-+ for (i = 0; i < (datetoo ? 8 : 3); i++) {
-+ unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
-+
-+ xfer = i2c_master_send(client, rdata, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev,
-+ "%s: xfer=%d addr=%02x, data=%02x\n",
-+ __FUNCTION__,
-+ xfer, rdata[1], rdata[2]);
-+ return -EIO;
-+ }
-+ };
-+
-+ /* disable further writes */
-+ xfer = i2c_master_send(client, diswe, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_fix_osc(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_time tm;
-+
-+ tm.tm_hour = 0;
-+ tm.tm_min = 0;
-+ tm.tm_sec = 0;
-+
-+ if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
-+ dev_err(&client->dev,
-+ "unable to restart the clock\n");
-+
-+ return err;
-+}
-+
-+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
-+{
-+ unsigned char dtr;
-+ static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
-+ };
-+
-+ /* read dtr register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
-+
-+ *trim = 0;
-+
-+ if (dtr & X1205_DTR_DTR0)
-+ *trim += 20;
-+
-+ if (dtr & X1205_DTR_DTR1)
-+ *trim += 10;
-+
-+ if (dtr & X1205_DTR_DTR2)
-+ *trim = -*trim;
-+
-+ return 0;
-+}
-+
-+static int x1205_get_atrim(struct i2c_client *client, int *trim)
-+{
-+ s8 atr;
-+ static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, atr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
-+ };
-+
-+ /* read atr register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
-+
-+ /* atr is a two's complement value on 6 bits,
-+ * perform sign extension. The formula is
-+ * Catr = (atr * 0.25pF) + 11.00pF.
-+ */
-+ if (atr & 0x20)
-+ atr |= 0xC0;
-+
-+ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
-+
-+ *trim = (atr * 250) + 11000;
-+
-+ dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
-+
-+ return 0;
-+}
-+
-+static int x1205_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+
-+ struct rtc_time tm;
-+ struct timespec tv;
-+ unsigned char sr;
-+
-+ if ((err = x1205_get_status(client, &sr)) < 0)
-+ return err;
-+
-+ /* Don't set if we had a power failure */
-+ if (sr & X1205_SR_RTCF)
-+ return -EINVAL;
-+
-+ if ((err = x1205_get_datetime(client, &tm, X1205_CCR_BASE)) < 0)
-+ return err;
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+ * whether it stores the most close value or the value with partial
-+ * seconds truncated. However, it is important that we use it to store
-+ * the truncated value. This is because otherwise it is necessary,
-+ * in an rtc sync function, to read both xtime.tv_sec and
-+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+ * of >32bits is not possible. So storing the most close value would
-+ * slow down the sync API. So here we have the truncated value and
-+ * the best guess is to add 0.5s.
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ rtc_tm_to_time(&tm, &tv.tv_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->dev,
-+ "setting the system clock to %d-%d-%d %d:%d:%d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+struct x1205_limit
-+{
-+ unsigned char reg;
-+ unsigned char mask;
-+ unsigned char min;
-+ unsigned char max;
-+};
-+
-+static int x1205_validate_client(struct i2c_client *client)
-+{
-+ int i, xfer;
-+
-+ /* Probe array. We will read the register at the specified
-+ * address and check if the given bits are zero.
-+ */
-+ static const unsigned char probe_zero_pattern[] = {
-+ /* register, mask */
-+ X1205_REG_SR, 0x18,
-+ X1205_REG_DTR, 0xF8,
-+ X1205_REG_ATR, 0xC0,
-+ X1205_REG_INT, 0x18,
-+ X1205_REG_0, 0xFF,
-+ };
-+
-+ static const struct x1205_limit probe_limits_pattern[] = {
-+ /* register, mask, min, max */
-+ { X1205_REG_Y2K, 0xFF, 19, 20 },
-+ { X1205_REG_DW, 0xFF, 0, 6 },
-+ { X1205_REG_YR, 0xFF, 0, 99 },
-+ { X1205_REG_MO, 0xFF, 0, 12 },
-+ { X1205_REG_DT, 0xFF, 0, 31 },
-+ { X1205_REG_HR, 0x7F, 0, 23 },
-+ { X1205_REG_MN, 0xFF, 0, 59 },
-+ { X1205_REG_SC, 0xFF, 0, 59 },
-+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
-+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
-+ };
-+
-+ /* check that registers have bits a 0 where expected */
-+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
-+ unsigned char buf;
-+
-+ unsigned char addr[2] = { 0, probe_zero_pattern[i] };
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr },
-+ { client->addr, I2C_M_RD, 1, &buf },
-+ };
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+ if (xfer != 2) {
-+ dev_err(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ if ((buf & probe_zero_pattern[i+1]) != 0) {
-+ dev_err(&client->adapter->dev,
-+ "%s: register=%02x, zero pattern=%d, value=%x\n",
-+ __FUNCTION__, addr[1], i, buf);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ /* check limits (only registers with bcd values) */
-+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
-+ unsigned char reg, value;
-+
-+ unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr },
-+ { client->addr, I2C_M_RD, 1, &reg },
-+ };
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+ if (xfer != 2) {
-+ dev_err(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ value = BCD2BIN(reg & probe_limits_pattern[i].mask);
-+
-+ if (value > probe_limits_pattern[i].max ||
-+ value < probe_limits_pattern[i].min) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register=%x, lim pattern=%d, value=%d\n",
-+ __FUNCTION__, addr[1], i, value);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_rtc_read_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return x1205_get_datetime(to_i2c_client(dev),
-+ &alrm->time, X1205_ALM0_BASE);
-+}
-+
-+static int x1205_rtc_set_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return x1205_set_datetime(to_i2c_client(dev),
-+ &alrm->time, 1, X1205_ALM0_BASE);
-+}
-+
-+static int x1205_rtc_read_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return x1205_get_datetime(to_i2c_client(dev),
-+ tm, X1205_CCR_BASE);
-+}
-+
-+static int x1205_rtc_set_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return x1205_set_datetime(to_i2c_client(dev),
-+ tm, 1, X1205_CCR_BASE);
-+}
-+
-+static int x1205_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ int err;
-+
-+ struct rtc_time new_tm, old_tm;
-+
-+ if ((err = x1205_rtc_read_time(dev, &old_tm) == 0))
-+ return err;
-+
-+ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+ new_tm.tm_sec = secs % 60;
-+ secs /= 60;
-+ new_tm.tm_min = secs % 60;
-+ secs /= 60;
-+ new_tm.tm_hour = secs % 24;
-+
-+ /*
-+ * avoid writing when we're going to change the day
-+ * of the month. We will retry in the next minute.
-+ * This basically means that if the RTC must not drift
-+ * by more than 1 minute in 11 minutes.
-+ */
-+ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+ return 1;
-+
-+ return x1205_rtc_set_time(dev, &new_tm);
-+}
-+
-+static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+ int err, dtrim, atrim;
-+
-+ seq_printf(seq, "24hr\t\t: yes\n");
-+
-+ err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
-+ if (err == 0)
-+ seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
-+
-+ err = x1205_get_atrim(to_i2c_client(dev), &atrim);
-+ if (err == 0)
-+ seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
-+ atrim / 1000, atrim % 1000);
-+ return 0;
-+}
-+
-+static struct rtc_class_ops x1205_rtc_ops = {
-+ .proc = x1205_rtc_proc,
-+ .read_time = x1205_rtc_read_time,
-+ .set_time = x1205_rtc_set_time,
-+ .read_alarm = x1205_rtc_read_alarm,
-+ .set_alarm = x1205_rtc_set_alarm,
-+ .set_mmss = x1205_rtc_set_mmss,
-+};
-+
-+static ssize_t x1205_sysfs_show_atrim(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ int atrim;
-+
-+ if (x1205_get_atrim(to_i2c_client(dev), &atrim) == 0) {
-+ return sprintf(buf, "%d.%02d pF\n",
-+ atrim / 1000, atrim % 1000); }
-+ return 0;
-+}
-+static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
-+
-+static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ int dtrim;
-+
-+ if (x1205_get_dtrim(to_i2c_client(dev), &dtrim) == 0) {
-+ return sprintf(buf, "%d ppm\n", dtrim);
-+ }
-+ return 0;
-+}
-+static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
-+
-+
-+static int x1205_attach(struct i2c_adapter *adapter)
-+{
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ return i2c_probe(adapter, &addr_data, x1205_probe);
-+}
-+
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ int err = 0;
-+ unsigned char sr;
-+ struct i2c_client *client;
-+ struct rtc_device *rtc;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+ err = -ENODEV;
-+ goto exit;
-+ }
-+
-+ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ /* I2C client */
-+ client->addr = address;
-+ client->driver = &x1205_driver;
-+ client->adapter = adapter;
-+
-+ strlcpy(client->name, x1205_driver.name, I2C_NAME_SIZE);
-+
-+ /* Verify the chip is really an X1205 */
-+ if (kind < 0) {
-+ if (x1205_validate_client(client) < 0) {
-+ err = -ENODEV;
-+ goto exit_kfree;
-+ }
-+ }
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(client)))
-+ goto exit_kfree;
-+
-+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+ rtc = rtc_device_register(x1205_driver.name, &client->dev,
-+ &x1205_rtc_ops, THIS_MODULE);
-+
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&client->dev,
-+ "unable to register the class device\n");
-+ goto exit_detach;
-+ }
-+
-+ i2c_set_clientdata(client, rtc);
-+
-+ /* Check for power failures and eventualy enable the osc */
-+ if ((err = x1205_get_status(client, &sr)) == 0) {
-+ if (sr & X1205_SR_RTCF) {
-+ dev_err(&client->dev,
-+ "power failure detected, "
-+ "please set the clock\n");
-+ udelay(50);
-+ x1205_fix_osc(client);
-+ }
-+ }
-+ else
-+ dev_err(&client->dev, "couldn't read status\n");
-+
-+ /* If requested, set the system time */
-+ if (hctosys) {
-+ if ((err = x1205_hctosys(client)) < 0)
-+ dev_err(&client->dev,
-+ "unable to set the system clock\n");
-+ }
-+
-+ device_create_file(&client->dev, &dev_attr_atrim);
-+ device_create_file(&client->dev, &dev_attr_dtrim);
-+
-+ return 0;
-+
-+exit_detach:
-+ i2c_detach_client(client);
-+
-+exit_kfree:
-+ kfree(client);
-+
-+exit:
-+ return err;
-+}
-+
-+static int x1205_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_device *rtc = i2c_get_clientdata(client);
-+
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ if (rtc)
-+ rtc_device_unregister(rtc);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ kfree(client);
-+
-+ return 0;
-+}
-+
-+static int __init x1205_init(void)
-+{
-+ return i2c_add_driver(&x1205_driver);
-+}
-+
-+static void __exit x1205_exit(void)
-+{
-+ i2c_del_driver(&x1205_driver);
-+}
-+
-+MODULE_AUTHOR(
-+ "Karen Spearel <kas11@tampabay.rr.com>, "
-+ "Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(x1205_init);
-+module_exit(x1205_exit);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-test.c 2006-01-04 01:27:19.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * An RTC test device/driver
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/rtc.h>
-+#include <linux/platform_device.h>
-+
-+static int test_rtc_read_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_set_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_read_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ rtc_time_to_tm(get_seconds(), tm);
-+ return 0;
-+}
-+
-+static int test_rtc_set_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+ struct platform_device *plat_dev = to_platform_device(dev);
-+
-+ seq_printf(seq, "24hr\t\t: yes\n");
-+ seq_printf(seq, "test\t\t: yes\n");
-+ seq_printf(seq, "id\t\t: %d\n", plat_dev->id);
-+
-+ return 0;
-+}
-+
-+static int test_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ /* We do support interrupts, they're generated
-+ * using the sysfs interface.
-+ */
-+ switch (cmd) {
-+ case RTC_PIE_ON:
-+ case RTC_PIE_OFF:
-+ case RTC_UIE_ON:
-+ case RTC_UIE_OFF:
-+ case RTC_AIE_ON:
-+ case RTC_AIE_OFF:
-+ return 0;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+static struct rtc_class_ops test_rtc_ops = {
-+ .proc = test_rtc_proc,
-+ .read_time = test_rtc_read_time,
-+ .set_time = test_rtc_set_time,
-+ .read_alarm = test_rtc_read_alarm,
-+ .set_alarm = test_rtc_set_alarm,
-+ .set_mmss = test_rtc_set_mmss,
-+ .ioctl = test_rtc_ioctl,
-+};
-+
-+static ssize_t test_irq_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ return sprintf(buf, "%d\n", 42);
-+}
-+static ssize_t test_irq_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ int retval;
-+ struct platform_device *plat_dev = to_platform_device(dev);
-+ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-+
-+ retval = count;
-+ if (strncmp(buf, "tick", 4) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_PF | RTC_IRQF);
-+ else if (strncmp(buf, "alarm", 5) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_AF | RTC_IRQF);
-+ else if (strncmp(buf, "update", 6) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_UF | RTC_IRQF);
-+ else
-+ retval = -EINVAL;
-+
-+ return retval;
-+}
-+static DEVICE_ATTR(irq, S_IRUGO | S_IWUSR, test_irq_show, test_irq_store);
-+
-+static int test_probe(struct platform_device *plat_dev)
-+{
-+ int err;
-+ struct rtc_device *rtc = rtc_device_register("test", &plat_dev->dev,
-+ &test_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&plat_dev->dev,
-+ "unable to register the class device\n");
-+ return err;
-+ }
-+ device_create_file(&plat_dev->dev, &dev_attr_irq);
-+
-+ platform_set_drvdata(plat_dev, rtc);
-+
-+ return 0;
-+}
-+
-+static int test_remove(struct platform_device *plat_dev)
-+{
-+ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-+
-+ rtc_device_unregister(rtc);
-+ device_remove_file(&plat_dev->dev, &dev_attr_irq);
-+
-+ return 0;
-+}
-+
-+static void test_release(struct device * dev)
-+{
-+}
-+
-+struct platform_device test_dev_zero = {
-+ .name = "rtc-test",
-+ .id = 0,
-+ .dev.release = test_release,
-+};
-+
-+struct platform_device test_dev_one = {
-+ .name = "rtc-test",
-+ .id = 1,
-+ .dev.release = test_release,
-+};
-+
-+struct platform_driver test_drv = {
-+ .probe = test_probe,
-+ .remove = test_remove,
-+ .driver = {
-+ .name = "rtc-test",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init test_init(void)
-+{
-+ platform_device_register(&test_dev_zero);
-+ platform_device_register(&test_dev_one);
-+ platform_driver_register(&test_drv);
-+
-+ return 0;
-+}
-+
-+static void __exit test_exit(void)
-+{
-+ platform_driver_unregister(&test_drv);
-+ platform_device_unregister(&test_dev_zero);
-+ platform_device_unregister(&test_dev_one);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC test driver/device");
-+MODULE_LICENSE("GPL");
-+
-+module_init(test_init);
-+module_exit(test_exit);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-ds1672.c 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,266 @@
-+/*
-+ * An rtc/i2c driver for the Dallas DS1672
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/i2c.h>
-+#include <linux/rtc.h>
-+
-+#define DRV_VERSION "0.1"
-+
-+/* Addresses to scan: none. This chip cannot be detected. */
-+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+/* Registers */
-+
-+#define DS1672_REG_CNT_BASE 0
-+#define DS1672_REG_CONTROL 4
-+#define DS1672_REG_TRICKLE 5
-+
-+
-+/* Prototypes */
-+static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind);
-+
-+/*
-+ * In the routines that deal directly with the ds1672 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is initialized as 2000. Time is set to UTC.
-+ */
-+static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+ unsigned long time;
-+ unsigned char buf[4];
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - counters=%02x,%02x,%02x,%02x\n"
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3]);
-+
-+ time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
-+
-+ rtc_time_to_tm(time, tm);
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ return 0;
-+}
-+
-+static int ds1672_set_mmss(struct i2c_client *client, unsigned long secs)
-+{
-+ int xfer;
-+ unsigned char buf[5];
-+
-+ buf[0] = DS1672_REG_CNT_BASE;
-+ buf[1] = secs & 0x000000FF;
-+ buf[2] = (secs & 0x0000FF00) >> 8;
-+ buf[3] = (secs & 0x00FF0000) >> 16;
-+ buf[4] = (secs & 0xFF000000) >> 24;
-+
-+ xfer = i2c_master_send(client, buf, 5);
-+ if (xfer != 5) {
-+ dev_err(&client->dev, "%s: send: %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int ds1672_set_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+ unsigned long secs;
-+
-+ dev_dbg(&client->dev,
-+ "%s: secs=%d, mins=%d, hours=%d, ",
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ rtc_tm_to_time(tm, &secs);
-+
-+ return ds1672_set_mmss(client, secs);
-+}
-+
-+static int ds1672_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_time tm;
-+ struct timespec tv;
-+
-+ if ((err = ds1672_get_datetime(client, &tm)) != 0)
-+ return err;
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+ * whether it stores the most close value or the value with partial
-+ * seconds truncated. However, it is important that we use it to store
-+ * the truncated value. This is because otherwise it is necessary,
-+ * in an rtc sync function, to read both xtime.tv_sec and
-+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+ * of >32bits is not possible. So storing the most close value would
-+ * slow down the sync API. So here we have the truncated value and
-+ * the best guess is to add 0.5s.
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ rtc_tm_to_time(&tm, &tv.tv_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->dev,
-+ "setting the system clock to %d-%02d-%02d %02d:%02d:%02d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+static int ds1672_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ return ds1672_get_datetime(to_i2c_client(dev), tm);
-+}
-+
-+static int ds1672_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ return ds1672_set_datetime(to_i2c_client(dev), tm);
-+}
-+
-+static int ds1672_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ return ds1672_set_mmss(to_i2c_client(dev), secs);
-+}
-+
-+static struct rtc_class_ops ds1672_rtc_ops = {
-+ .read_time = ds1672_rtc_read_time,
-+ .set_time = ds1672_rtc_set_time,
-+ .set_mmss = ds1672_rtc_set_mmss,
-+};
-+
-+static int ds1672_attach(struct i2c_adapter *adapter)
-+{
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ return i2c_probe(adapter, &addr_data, ds1672_probe);
-+}
-+
-+static int ds1672_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_device *rtc = i2c_get_clientdata(client);
-+
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ if (rtc)
-+ rtc_device_unregister(rtc);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ kfree(client);
-+
-+ return 0;
-+}
-+
-+static struct i2c_driver ds1672_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "ds1672",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &ds1672_attach,
-+ .detach_client = &ds1672_detach,
-+};
-+
-+static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ int err = 0;
-+ struct i2c_client *client;
-+ struct rtc_device *rtc;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+ err = -ENODEV;
-+ goto exit;
-+ }
-+
-+ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ /* I2C client */
-+ client->addr = address;
-+ client->driver = &ds1672_driver;
-+ client->adapter = adapter;
-+
-+ strlcpy(client->name, ds1672_driver.name, I2C_NAME_SIZE);
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(client)))
-+ goto exit_kfree;
-+
-+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+ rtc = rtc_device_register(ds1672_driver.name, &client->dev,
-+ &ds1672_rtc_ops, THIS_MODULE);
-+
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&client->dev,
-+ "unable to register the class device\n");
-+ goto exit_detach;
-+ }
-+
-+ i2c_set_clientdata(client, rtc);
-+
-+ /* If requested, set the system time */
-+ if (hctosys) {
-+ if ((err = ds1672_hctosys(client)) < 0)
-+ dev_err(&client->dev,
-+ "unable to set the system clock\n");
-+ }
-+
-+ return 0;
-+
-+exit_detach:
-+ i2c_detach_client(client);
-+
-+exit_kfree:
-+ kfree(client);
-+
-+exit:
-+ return err;
-+}
-+
-+static int __init ds1672_init(void)
-+{
-+ return i2c_add_driver(&ds1672_driver);
-+}
-+
-+static void __exit ds1672_exit(void)
-+{
-+ i2c_del_driver(&ds1672_driver);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Dallas/Maxim DS1672 timekeeper driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(ds1672_init);
-+module_exit(ds1672_exit);
diff --git a/packages/linux/nas100d-kernel/2.6.15/50-nas100d-arch.patch b/packages/linux/nas100d-kernel/2.6.15/50-nas100d-arch.patch
deleted file mode 100644
index cb3eac2433..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/50-nas100d-arch.patch
+++ /dev/null
@@ -1,453 +0,0 @@
-http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3215/1
-
-Iomega NAS 100d (MACH_NAS100D) machine support
-
-This patch adds support for a new arm/ixp4xx machine - the Iomega NAS
-100d network attached storage product. The NAS100D is a consumer
-device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB
-of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an
-Atheros mini-PCI card.
-
-Work on porting the latest 2.6.x kernel to this device is being done by
-the NSLU2-Linux project (the same team who maintains the port to the
-Linksys NSLU2 device). In particular, the majority of this patch was
-authored by Alessandro Zummo, based on the work done for MACH_NSLU2
-support by the NSLU2-Linux core team of developers.
-
-MACH_NAS100D (as implemented by this patch) can be enabled in jumbo
-ixp4xx kernels without any affect on the other machines supported by
-that kernel.
-
-This patch applies cleanly against 2.6.15-rc7 and should be trivial to
-apply to later kernel versions. It does not depend upon any other
-patches.
-
-Modified files (and number of lines inserted):
-arch/arm/mach-ixp4xx/Kconfig | 8
-arch/arm/mach-ixp4xx/Makefile | 1
-include/asm-arm/arch-ixp4xx/hardware.h | 1
-include/asm-arm/arch-ixp4xx/irqs.h | 9
-include/asm-arm/arch-ixp4xx/nas100d.h | 75
-arch/arm/mach-ixp4xx/nas100d-pci.c | 77
-arch/arm/mach-ixp4xx/nas100d-power.c | 69
-arch/arm/mach-ixp4xx/nas100d-setup.c | 133
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
-
---- linux-2.6.15-rc7/arch/arm/mach-ixp4xx/Kconfig 2005-12-27 22:29:00.000000000 +0100
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/Kconfig 2005-12-27 22:29:52.000000000 +0100
-@@ -71,6 +71,14 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_NAS100D
-+ bool
-+ prompt "NAS100D"
-+ help
-+ Say 'Y' here if you want your kernel to support Iomega's
-+ NAS 100d device. For more information on this platform,
-+ see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
-+
- #
- # Avila and IXDP share the same source for now. Will change in future
- #
---- linux-2.6.15-rc7/arch/arm/mach-ixp4xx/Makefile 2005-12-27 22:29:00.000000000 +0100
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/Makefile 2005-12-27 22:30:37.000000000 +0100
-@@ -9,4 +9,5 @@ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-+obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o
-
---- linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/hardware.h 2005-12-27 22:29:18.000000000 +0100
-+++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/hardware.h 2005-12-27 22:31:08.000000000 +0100
-@@ -45,5 +45,6 @@ extern unsigned int processor_id;
- #include "coyote.h"
- #include "prpmc1100.h"
- #include "nslu2.h"
-+#include "nas100d.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/irqs.h 2005-12-27 22:29:18.000000000 +0100
-+++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/irqs.h 2005-12-27 22:29:52.000000000 +0100
-@@ -100,4 +100,13 @@
- #define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
- #define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
-
-+/*
-+ * NAS100D board IRQs
-+ */
-+#define IRQ_NAS100D_PCI_INTA IRQ_IXP4XX_GPIO11
-+#define IRQ_NAS100D_PCI_INTB IRQ_IXP4XX_GPIO10
-+#define IRQ_NAS100D_PCI_INTC IRQ_IXP4XX_GPIO9
-+#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8
-+#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7
-+
- #endif
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/nas100d.h 2005-11-12 14:24:14.000000000 +0100
-@@ -0,0 +1,75 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/nas100d.h
-+ *
-+ * NAS100D platform specific definitions
-+ *
-+ * Copyright (c) 2005 Tower Technologies
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on ixdp425.h:
-+ * Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define NAS100D_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
-+#define NAS100D_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
-+
-+#define NAS100D_SDA_PIN 6
-+#define NAS100D_SCL_PIN 5
-+
-+/*
-+ * NAS100D PCI IRQs
-+ */
-+#define NAS100D_PCI_MAX_DEV 3
-+#define NAS100D_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define NAS100D_PCI_INTA_PIN 11
-+#define NAS100D_PCI_INTB_PIN 10
-+#define NAS100D_PCI_INTC_PIN 9
-+#define NAS100D_PCI_INTD_PIN 8
-+#define NAS100D_PCI_INTE_PIN 7
-+
-+/* GPIO */
-+
-+#define NAS100D_GPIO0 0
-+#define NAS100D_GPIO1 1
-+#define NAS100D_GPIO2 2
-+#define NAS100D_GPIO3 3
-+#define NAS100D_GPIO4 4
-+#define NAS100D_GPIO5 5
-+#define NAS100D_GPIO6 6
-+#define NAS100D_GPIO7 7
-+#define NAS100D_GPIO8 8
-+#define NAS100D_GPIO9 9
-+#define NAS100D_GPIO10 10
-+#define NAS100D_GPIO11 11
-+#define NAS100D_GPIO12 12
-+#define NAS100D_GPIO13 13
-+#define NAS100D_GPIO14 14
-+#define NAS100D_GPIO15 15
-+
-+
-+/* Buttons */
-+
-+#define NAS100D_PB_GPIO NAS100D_GPIO14
-+#define NAS100D_RB_GPIO NAS100D_GPIO4
-+#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */
-+
-+#define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14
-+#define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4
-+
-+/*
-+#define NAS100D_PB_BM (1L << NAS100D_PB_GPIO)
-+#define NAS100D_PO_BM (1L << NAS100D_PO_GPIO)
-+#define NAS100D_RB_BM (1L << NAS100D_RB_GPIO)
-+*/
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/nas100d-pci.c 2005-11-12 14:24:14.000000000 +0100
-@@ -0,0 +1,77 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nas100d-pci.c
-+ *
-+ * NAS 100d board-level PCI initialization
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init nas100d_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
-+ set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
-+ set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
-+
-+ gpio_line_isr_clear(NAS100D_PCI_INTA_PIN);
-+ gpio_line_isr_clear(NAS100D_PCI_INTB_PIN);
-+ gpio_line_isr_clear(NAS100D_PCI_INTC_PIN);
-+ gpio_line_isr_clear(NAS100D_PCI_INTD_PIN);
-+ gpio_line_isr_clear(NAS100D_PCI_INTE_PIN);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] =
-+ {
-+ { IRQ_NAS100D_PCI_INTA, -1, -1 },
-+ { IRQ_NAS100D_PCI_INTB, -1, -1 },
-+ { IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE },
-+ };
-+
-+ int irq = -1;
-+
-+ if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES)
-+ irq = pci_irq_table[slot-1][pin-1];
-+
-+ return irq;
-+}
-+
-+struct hw_pci __initdata nas100d_pci = {
-+ .nr_controllers = 1,
-+ .preinit = nas100d_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = nas100d_map_irq,
-+};
-+
-+int __init nas100d_pci_init(void)
-+{
-+ if (machine_is_nas100d())
-+ pci_common_init(&nas100d_pci);
-+
-+ return 0;
-+}
-+
-+subsys_initcall(nas100d_pci_init);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/nas100d-power.c 2005-11-12 14:24:14.000000000 +0100
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nas100d-power.c
-+ *
-+ * NAS 100d Power/Reset driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nas100d-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/mach-types.h>
-+
-+extern void ctrl_alt_del(void);
-+
-+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* Signal init to do the ctrlaltdel action, this will bypass init if
-+ * it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init nas100d_power_init(void)
-+{
-+ if (!(machine_is_nas100d()))
-+ return 0;
-+
-+ set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
-+
-+ gpio_line_isr_clear(NAS100D_RB_GPIO);
-+
-+ if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
-+ SA_INTERRUPT, "NAS100D reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ NAS100D_RB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit nas100d_power_exit(void)
-+{
-+ free_irq(NAS100D_RB_IRQ, NULL);
-+}
-+
-+module_init(nas100d_power_init);
-+module_exit(nas100d_power_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NAS100D Power/Reset driver");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/nas100d-setup.c 2005-11-12 14:24:14.000000000 +0100
-@@ -0,0 +1,133 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nas100d-setup.c
-+ *
-+ * NAS 100d board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data nas100d_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource nas100d_flash_resource = {
-+ .start = NAS100D_FLASH_BASE,
-+ .end = NAS100D_FLASH_BASE + NAS100D_FLASH_SIZE,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device nas100d_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &nas100d_flash_data,
-+ .num_resources = 1,
-+ .resource = &nas100d_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
-+ .sda_pin = NAS100D_SDA_PIN,
-+ .scl_pin = NAS100D_SCL_PIN,
-+};
-+
-+static struct platform_device nas100d_i2c_controller = {
-+ .name = "IXP4XX-I2C",
-+ .id = 0,
-+ .dev.platform_data = &nas100d_i2c_gpio_pins,
-+ .num_resources = 0,
-+};
-+
-+static struct resource nas100d_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port nas100d_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device nas100d_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = nas100d_uart_data,
-+ .num_resources = 2,
-+ .resource = nas100d_uart_resources,
-+};
-+
-+static struct platform_device *nas100d_devices[] __initdata = {
-+ &nas100d_i2c_controller,
-+ &nas100d_flash,
-+ &nas100d_uart,
-+};
-+
-+static void nas100d_power_off(void)
-+{
-+ /* This causes the box to drop the power and go dead. */
-+
-+ /* enable the pwr cntl gpio */
-+ gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+ /* do the deed */
-+ gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+static void __init nas100d_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pm_power_off = nas100d_power_off;
-+
-+ platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
-+}
-+
-+MACHINE_START(NAS100D, "Iomega NAS 100d")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_ram = PHYS_OFFSET,
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+ .boot_params = 0x00000100,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .init_machine = nas100d_init,
-+MACHINE_END
diff --git a/packages/linux/nas100d-kernel/2.6.15/60-nas100d-i2c.patch b/packages/linux/nas100d-kernel/2.6.15/60-nas100d-i2c.patch
deleted file mode 100644
index 5dfed57c0e..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/60-nas100d-i2c.patch
+++ /dev/null
@@ -1,531 +0,0 @@
- drivers/i2c/chips/Kconfig | 9
- drivers/i2c/chips/Makefile | 1
- drivers/i2c/chips/pcf8563.c | 466 ++++++++++++++++++++++++++++++++++++++++++++
- include/linux/pcf8563.h | 27 ++
- 4 files changed, 503 insertions(+)
-
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nas100d/drivers/i2c/chips/pcf8563.c 2005-11-22 17:32:35.000000000 +0100
-@@ -0,0 +1,466 @@
-+/*
-+ * pcf8563.c - An i2c driver for the Philips PCF8563 RTC
-+ * Copyright 2005 Tower Technologies
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * based on the other drivers in this same directory.
-+ *
-+ * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/string.h>
-+#include <linux/bcd.h>
-+#include <linux/rtc.h>
-+#include <linux/list.h>
-+
-+#include <linux/pcf8563.h>
-+
-+#define DRV_VERSION "0.3.4"
-+
-+/* Addresses to scan */
-+static unsigned short normal_i2c[] = { 0x51, I2C_CLIENT_END };
-+
-+/* Module parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+#define PCF8563_REG_ST1 0x00 /* status */
-+#define PCF8563_REG_ST2 0x01
-+
-+#define PCF8563_REG_SC 0x02 /* datetime */
-+#define PCF8563_REG_MN 0x03
-+#define PCF8563_REG_HR 0x04
-+#define PCF8563_REG_DM 0x05
-+#define PCF8563_REG_DW 0x06
-+#define PCF8563_REG_MO 0x07
-+#define PCF8563_REG_YR 0x08
-+
-+#define PCF8563_REG_AMN 0x09 /* alarm */
-+#define PCF8563_REG_AHR 0x0A
-+#define PCF8563_REG_ADM 0x0B
-+#define PCF8563_REG_ADW 0x0C
-+
-+#define PCF8563_REG_CLKO 0x0D /* clock out */
-+#define PCF8563_REG_TMRC 0x0E /* timer control */
-+#define PCF8563_REG_TMR 0x0F /* timer */
-+
-+#define PCF8563_SC_LV 0x80 /* low voltage */
-+#define PCF8563_MO_C 0x80 /* century */
-+
-+/* Prototypes */
-+static int pcf8563_attach(struct i2c_adapter *adapter);
-+static int pcf8563_detach(struct i2c_client *client);
-+static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
-+static int pcf8563_command(struct i2c_client *client, unsigned int cmd,
-+ void *arg);
-+
-+static struct i2c_driver pcf8563_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "pcf8563",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &pcf8563_attach,
-+ .detach_client = &pcf8563_detach,
-+};
-+
-+struct pcf8563_data {
-+ struct i2c_client client;
-+ struct list_head list;
-+};
-+
-+static const unsigned char days_in_mo[] =
-+ { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-+
-+static LIST_HEAD(pcf8563_clients);
-+
-+/* Workaround until the I2C subsytem will allow to send
-+ * commands to a specific client. This function will send the command
-+ * to the first client.
-+ */
-+int pcf8563_do_command(unsigned int cmd, void *arg)
-+{
-+ struct list_head *walk;
-+ struct list_head *tmp;
-+ struct pcf8563_data *data;
-+
-+ list_for_each_safe(walk, tmp, &pcf8563_clients) {
-+ data = list_entry(walk, struct pcf8563_data, list);
-+ return pcf8563_command(&data->client, cmd, arg);
-+ }
-+
-+ return -ENODEV;
-+}
-+
-+#define is_leap(year) \
-+ ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-+
-+/* make sure the rtc_time values are in bounds */
-+
-+static int pcf8563_validate_tm(struct rtc_time *tm)
-+{
-+ int year = tm->tm_year + 1900;
-+
-+ if ((tm->tm_year < 70) || (tm->tm_year > 255))
-+ return -EINVAL;
-+
-+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-+ return -EINVAL;
-+
-+ if (tm->tm_mday > days_in_mo[tm->tm_mon]
-+ + ((tm->tm_mon == 1) && is_leap(year)))
-+ return -EINVAL;
-+
-+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+/*
-+ * In the routines that deal directly with the pcf8563 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
-+ */
-+static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+ unsigned char buf[13];
-+ unsigned char addr = PCF8563_REG_ST1;
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 1, &addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 13, buf }, /* read status + date */
-+ };
-+
-+ /* read registers */
-+ if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ if (buf[PCF8563_REG_SC] & PCF8563_SC_LV)
-+ dev_info(&client->dev,
-+ "low voltage detected, date/time is not reliable.\n");
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
-+ "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3],
-+ buf[4], buf[5], buf[6], buf[7],
-+ buf[8]);
-+
-+
-+ tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F);
-+ tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F);
-+ tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
-+ tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F);
-+ tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
-+ tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
-+ tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR])
-+ + (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 100 : 0);
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ if (pcf8563_validate_tm(tm) < 0) {
-+ dev_err(&client->dev, "retrieved date/time is not valid.\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo)
-+{
-+ int i, err;
-+ unsigned char buf[9];
-+
-+ /* check if all values in the tm struct are correct */
-+ if ((err = pcf8563_validate_tm(tm)) < 0)
-+ return err;
-+
-+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ /* hours, minutes and seconds */
-+ buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec);
-+ buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min);
-+ buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour);
-+
-+ /* should we also set the date? */
-+ if (datetoo) {
-+ buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday);
-+
-+ /* month, 1 - 12 */
-+ buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1);
-+
-+ /* year and century */
-+ buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100);
-+ if (tm->tm_year / 100)
-+ buf[PCF8563_REG_MO] |= PCF8563_MO_C;
-+
-+ buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;
-+ }
-+
-+ /* write register's data */
-+ for (i = 0; i < (datetoo ? 7 : 3); i++) {
-+ unsigned char data[2] = { PCF8563_REG_SC + i,
-+ buf[PCF8563_REG_SC + i] };
-+
-+ err = i2c_master_send(client, data, sizeof(data));
-+ if (err != sizeof(data)) {
-+ dev_err(&client->dev,
-+ "%s: err=%d addr=%02x, data=%02x\n",
-+ __FUNCTION__, err, data[0], data[1]);
-+ return -EIO;
-+ }
-+ };
-+
-+ return 0;
-+}
-+
-+static int pcf8563_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+
-+ struct rtc_time tm;
-+ struct timespec tv;
-+
-+ err = pcf8563_command(client, PCF8563_CMD_GETDATETIME, &tm);
-+
-+ if (err) {
-+ dev_err(&client->dev,
-+ "Unable to set the system clock\n");
-+ return err;
-+ }
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+ * whether it stores the most close value or the value with partial
-+ * seconds truncated. However, it is important that we use it to store
-+ * the truncated value. This is because otherwise it is necessary,
-+ * in an rtc sync function, to read both xtime.tv_sec and
-+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+ * of >32bits is not possible. So storing the most close value would
-+ * slow down the sync API. So here we have the truncated value and
-+ * the best guess is to add 0.5s.
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ /* WARNING: this is not the C library 'mktime' call, it is a built in
-+ * inline function from include/linux/time.h. It expects (requires)
-+ * the month to be in the range 1-12
-+ */
-+
-+ tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour,
-+ tm.tm_min, tm.tm_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->dev,
-+ "setting the system clock to %d-%d-%d %d:%d:%d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+struct pcf8563_limit
-+{
-+ unsigned char reg;
-+ unsigned char mask;
-+ unsigned char min;
-+ unsigned char max;
-+};
-+
-+static int pcf8563_validate_client(struct i2c_client *client)
-+{
-+ int i, xfer;
-+
-+ static const struct pcf8563_limit probe_limits_pattern[] = {
-+ /* register, mask, min, max */
-+ { PCF8563_REG_SC, 0x7F, 0, 59 },
-+ { PCF8563_REG_MN, 0x7F, 0, 59 },
-+ { PCF8563_REG_HR, 0x3F, 0, 23 },
-+ { PCF8563_REG_DM, 0x3F, 0, 31 },
-+ { PCF8563_REG_MO, 0x1F, 0, 12 },
-+ { PCF8563_REG_YR, 0xFF, 0, 99 },
-+ };
-+
-+ /* check limits (only registers with bcd values) */
-+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
-+ unsigned char addr, buf, value;
-+
-+ addr = probe_limits_pattern[i].reg;
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, &addr },
-+ { client->addr, I2C_M_RD, 1, &buf },
-+ };
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+ if (xfer != 2) {
-+ dev_err(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, probe_limits_pattern[i].reg);
-+
-+ return -EIO;
-+ }
-+
-+ value = BCD2BIN(buf & probe_limits_pattern[i].mask);
-+
-+ if (value > probe_limits_pattern[i].max ||
-+ value < probe_limits_pattern[i].min) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register=%x, lim pattern=%d, value=%d\n",
-+ __FUNCTION__, probe_limits_pattern[i].reg, i, value);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int pcf8563_attach(struct i2c_adapter *adapter)
-+{
-+ return i2c_probe(adapter, &addr_data, pcf8563_probe);
-+}
-+
-+static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ struct i2c_client *client;
-+ struct pcf8563_data *data;
-+
-+ int err = 0;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+ err = -ENODEV;
-+ goto exit;
-+ }
-+
-+ if (!(data = kzalloc(sizeof(struct pcf8563_data), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ client = &data->client;
-+ client->addr = address;
-+ client->driver = &pcf8563_driver;
-+ client->adapter = adapter;
-+
-+ strlcpy(client->name, pcf8563_driver.name, I2C_NAME_SIZE);
-+
-+ i2c_set_clientdata(client, data);
-+
-+ /* Verify the chip is really an PCF8563 */
-+ if (kind < 0) {
-+ if (pcf8563_validate_client(client) < 0) {
-+ err = -ENODEV;
-+ goto exit_kfree;
-+ }
-+ }
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(client)))
-+ goto exit_kfree;
-+
-+ list_add(&data->list, &pcf8563_clients);
-+
-+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+ /* If requested, set the system time */
-+ if (hctosys)
-+ pcf8563_hctosys(client);
-+
-+ return 0;
-+
-+exit_kfree:
-+ kfree(data);
-+
-+exit:
-+ return err;
-+}
-+
-+static int pcf8563_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct pcf8563_data *data = i2c_get_clientdata(client);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ list_del(&data->list);
-+
-+ kfree(data);
-+
-+ return 0;
-+}
-+
-+static int pcf8563_command(struct i2c_client *client, unsigned int cmd,
-+ void *param)
-+{
-+ if (param == NULL)
-+ return -EINVAL;
-+
-+ if (!capable(CAP_SYS_TIME))
-+ return -EACCES;
-+
-+ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
-+
-+ switch (cmd) {
-+ case PCF8563_CMD_GETDATETIME:
-+ return pcf8563_get_datetime(client, param);
-+
-+ case PCF8563_CMD_SETTIME:
-+ return pcf8563_set_datetime(client, param, 0);
-+
-+ case PCF8563_CMD_SETDATETIME:
-+ return pcf8563_set_datetime(client, param, 1);
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+static int __init pcf8563_init(void)
-+{
-+ return i2c_add_driver(&pcf8563_driver);
-+}
-+
-+static void __exit pcf8563_exit(void)
-+{
-+ i2c_del_driver(&pcf8563_driver);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Philips PCF8563 RTC driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+EXPORT_SYMBOL_GPL(pcf8563_do_command);
-+
-+module_init(pcf8563_init);
-+module_exit(pcf8563_exit);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nas100d/include/linux/pcf8563.h 2005-11-22 01:36:46.000000000 +0100
-@@ -0,0 +1,27 @@
-+/*
-+ * pcf8563.h - defines for drivers/i2c/chips/pcf8563.c
-+ * Copyright 2005 Tower Technologies
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef __LINUX_PCF8563_H__
-+#define __LINUX_PCF8563_H__
-+
-+/* commands */
-+
-+#define PCF8563_CMD_GETDATETIME 0
-+#define PCF8563_CMD_SETTIME 1
-+#define PCF8563_CMD_SETDATETIME 2
-+#define PCF8563_CMD_GETALARM 3
-+#define PCF8563_CMD_SETALARM 4
-+
-+extern int pcf8563_do_command(unsigned int cmd, void *arg);
-+
-+#endif /* __LINUX_PCF8563_H__ */
---- linux-nas100d.orig/drivers/i2c/chips/Kconfig 2005-11-21 22:01:31.000000000 +0100
-+++ linux-nas100d/drivers/i2c/chips/Kconfig 2005-11-22 01:36:46.000000000 +0100
-@@ -135,4 +135,13 @@ config RTC_X1205_I2C
- This driver can also be built as a module. If so, the module
- will be called x1205.
-
-+config RTC_PCF8563_I2C
-+ tristate "Philips PCF8563 RTC"
-+ depends on I2C && EXPERIMENTAL
-+ help
-+ If you say yes here you get support for the Philips PCF8563
-+ Real Time Clock chip. This chip is used by the Iomega NAS100D.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called pcf8563.
- endmenu
---- linux-nas100d.orig/drivers/i2c/chips/Makefile 2005-11-21 22:01:31.000000000 +0100
-+++ linux-nas100d/drivers/i2c/chips/Makefile 2005-11-22 01:36:46.000000000 +0100
-@@ -14,6 +14,7 @@ obj-$(CONFIG_SENSORS_RTC8564) += rtc8564
- obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
- obj-$(CONFIG_TPS65010) += tps65010.o
- obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
-+obj-$(CONFIG_RTC_PCF8563_I2C) += pcf8563.o
-
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
diff --git a/packages/linux/nas100d-kernel/2.6.15/60-nas100d-ide.patch b/packages/linux/nas100d-kernel/2.6.15/60-nas100d-ide.patch
deleted file mode 100644
index fea83fbec7..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/60-nas100d-ide.patch
+++ /dev/null
@@ -1,155 +0,0 @@
- drivers/ide/pci/aec62xx.c | 67 +++++++++++++++++++++++++++++++++++++++++++---
- drivers/ide/setup-pci.c | 12 +++++++-
- 2 files changed, 75 insertions(+), 4 deletions(-)
-
---- linux-nas100d.orig/drivers/ide/pci/aec62xx.c 2005-11-21 20:49:50.000000000 +0100
-+++ linux-nas100d/drivers/ide/pci/aec62xx.c 2005-11-21 22:15:21.000000000 +0100
-@@ -145,6 +145,16 @@ static int aec6210_tune_chipset (ide_dri
- unsigned long flags;
-
- local_irq_save(flags);
-+
-+#ifdef CONFIG_MACH_NAS100D
-+ printk(KERN_INFO "aec62xx: nas100d tuning\n");
-+ pci_write_config_word(hwif->pci_dev, PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MASTER);
-+ pci_write_config_byte(hwif->pci_dev, PCI_LATENCY_TIMER, 0x80);
-+ /* Enable burst mode & force 2 ports enable */
-+ pci_read_config_byte(hwif->pci_dev, 0x4a, &tmp0);
-+ pci_write_config_byte(hwif->pci_dev, 0x4a, tmp0 | 0x80);
-+#endif
-+
- /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
- pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
- tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev));
-@@ -206,9 +216,17 @@ static int config_chipset_for_dma (ide_d
- {
- u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive));
-
-+#ifdef CONFIG_MACH_NAS100D
-+ ide_hwif_t *hwif= HWIF(drive);
-+ u8 unit = (drive->select.b.unit & 0x01);
-+#endif
- if (!(speed))
- return 0;
-
-+#ifdef CONFIG_MACH_NAS100D
-+ outb((inb(hwif->dma_base+2) & ~(1<<(5+unit))), hwif->dma_base+2);
-+#endif
-+
- (void) aec62xx_tune_chipset(drive, speed);
- return ide_dma_enable(drive);
- }
-@@ -299,6 +317,14 @@ static unsigned int __devinit init_chips
- {
- int bus_speed = system_bus_clock();
-
-+#ifdef CONFIG_MACH_NAS100D
-+ /* enable both ports */
-+ byte tmp;
-+ printk(KERN_INFO "%s: nas100d ports enable\n", name);
-+ pci_read_config_byte(dev, 0x4a, &tmp);
-+ pci_write_config_byte(dev, 0x4a, tmp | 0x06);
-+#endif
-+
- if (dev->resource[PCI_ROM_RESOURCE].start) {
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
-@@ -312,12 +338,35 @@ static unsigned int __devinit init_chips
- return dev->irq;
- }
-
-+#ifdef CONFIG_MACH_NAS100D
-+static void nas100d_insw (unsigned long port, u16 *addr, u32 count)
-+{
-+ while (count--)
-+ *addr++ = __cpu_to_le16(inw(port));
-+}
-+
-+static void nas100d_outw (u16 val, unsigned long port)
-+{
-+ u32 n, byte_enables, data;
-+ n = port % 4;
-+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-+ data = val << (8*n);
-+ ixp4xx_pci_write(port, byte_enables | NP_CMD_IOWRITE, __le16_to_cpu(data));
-+}
-+#endif
-+
- static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
- {
- hwif->autodma = 0;
- hwif->tuneproc = &aec62xx_tune_drive;
- hwif->speedproc = &aec62xx_tune_chipset;
-
-+#ifdef CONFIG_MACH_NAS100D
-+ printk(KERN_INFO "aec62xx: enabling nas100d iops\n");
-+ hwif->OUTW = nas100d_outw;
-+ hwif->INSW = nas100d_insw;
-+#endif
-+
- if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
- hwif->serialized = hwif->channel;
- hwif->no_dsc = 1;
-@@ -360,11 +409,18 @@ static void __devinit init_dma_aec62xx(i
- } else {
- u8 ata66 = 0;
- pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
-- if (!(hwif->udma_four))
-+ if (!(hwif->udma_four))
- hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1;
- }
-
- ide_setup_dma(hwif, dmabase, 8);
-+#ifdef CONFIG_MACH_NAS100D
-+ {
-+ u8 dma_stat = hwif->INB(hwif->dma_status);
-+ dma_stat |= (1 << 4);
-+ hwif->OUTB(dma_stat, hwif->dma_status);
-+ }
-+#endif
- }
-
- static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d)
-@@ -427,6 +483,9 @@ static ide_pci_device_t aec62xx_chipsets
- .init_dma = init_dma_aec62xx,
- .channels = 2,
- .autodma = AUTODMA,
-+#ifdef CONFIG_MACH_NAS100D
-+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
-+#endif
- .bootable = OFF_BOARD,
- },{ /* 4 */
- .name = "AEC6X80R",
-@@ -454,6 +513,8 @@ static int __devinit aec62xx_init_one(st
- {
- ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data];
-
-+ printk(KERN_INFO "aec62xx: using config %lx\n", id->driver_data);
-+
- return d->init_setup(dev, d);
- }
-
---- linux-nas100d.orig/drivers/ide/setup-pci.c 2005-11-21 20:49:50.000000000 +0100
-+++ linux-nas100d/drivers/ide/setup-pci.c 2005-11-21 22:01:22.000000000 +0100
-@@ -602,10 +602,20 @@ void ide_pci_setup_ports(struct pci_dev
- if ((d->flags & IDEPCI_FLAG_FORCE_PDC) &&
- (secondpdc++==1) && (port==1))
- goto controller_ok;
--
-+
- if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
- (tmp & e->mask) != e->val))
-+#ifdef CONFIG_MACH_NAS100D
-+ {
-+ pci_write_config_byte(dev, e->reg, tmp & ~0x01);
-+#endif
- continue; /* port not enabled */
-+#ifdef CONFIG_MACH_NAS100D
-+ }
-+ else
-+ pci_write_config_byte(dev, e->reg, tmp & ~0x01);
-+#endif
-+
- controller_ok:
-
- if (d->channels <= port)
diff --git a/packages/linux/nas100d-kernel/2.6.15/85-timer.patch b/packages/linux/nas100d-kernel/2.6.15/85-timer.patch
deleted file mode 100644
index e83120ca75..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/85-timer.patch
+++ /dev/null
@@ -1,246 +0,0 @@
---- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp
- * counter as a source of real clock ticks to account for missed jiffies.
-+ *
-+ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
-+ * this is significantly greater than the actual number on any ixp4xx
-+ * board. Neither this nor 'LATCH' are required by this code because
-+ * the only requirement is to generate HZ timer_tick calls per second.
- *************************************************************************/
-+#if TICK_NSEC * HZ != 1000000000
-+ /* This will cause the jiffies to drift unnecessarily. */
-+# error CLOCK_TICK_RATE should be a multiple of HZ for this code
-+#endif
-+
-+/* These are the control registers for the interrupt handler, they must
-+ * only be read and written by the interrupt handler and by the init
-+ * method (which sets them to 0).
-+ */
-+static volatile u32 last_timer_time;
-+static volatile int accumulated_error;
-+
-+/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
-+ * this from the board level code if required. The following variables
-+ * must be *written* only by set_board_tick_rate
-+ */
-+static u32 board_tick_rate;
-+static u32 board_tick_per_1000; /* board_tick_rate/1000 */
-+static u32 timer_count;
-+
-+/* The following symbol may be written to change the current tick rate,
-+ * it is read by the interrupt handler and used to reload the timer.
-+ * The 'real' value (the one in use) is 'board_tick_rate' above.
-+ * NOTE: this can be tweaked to match the actual crystal on a particular
-+ * machine.
-+ */
-+volatile u32 ixp4xx_board_tick_rate = 66666600;
-+EXPORT_SYMBOL(ixp4xx_board_tick_rate);
-+
-+/* The set API may run asynchronously in the presence of interrupts,
-+ * everything it does it is both atomic and complete (notice that it
-+ * doesn't change any of the 'volatile' values). The mathematics in
-+ * here require the following values. Changing the board tick rate
-+ * implies an unknown error in the current timestamp tick count.
-+ */
-+#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
-+# error unexpected value for timer reload mask
-+#endif
-+static void set_board_tick_rate(u32 rate) {
-+ u32 reload;
-+
-+ /* Store the two effectively informational rate values, the
-+ * error calculation is (rate - count*HZ) (above), and rate
-+ * is changed first, this can cause a temporary error which
-+ * will be corrected on the next interrupt.
-+ */
-+ board_tick_rate = rate;
-+ board_tick_per_1000 = (rate+500)/1000;
-+
-+ /* Calculate the correct value to load into the timer countdown
-+ * register, the low two bits must be b01 (to enable the timer).
-+ * Select the top bits to be as close to the desired value as
-+ * possible.
-+ *
-+ * First find the best value, regardless of the low two bits -
-+ * this is the value used in the interrupt calculation even though
-+ * it cannot necessarily be set into the register.
-+ */
-+ timer_count = (rate + (HZ/2))/HZ;
-+
-+ /* Now the timer_ticks are being generated at this rate, calculate
-+ * an appropriate value for the register. This stores a 30 bit
-+ * value which gives a period of 4*x+1, we want:
-+ *
-+ * 4*x+1 = board_tick_rate/HZ
-+ *
-+ * This needs to be rounded to the closest 4*HZ value:
-+ *
-+ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
-+ * x = (board_tick_rate+HZ) / (4*HZ);
-+ */
-+ reload = (board_tick_rate + HZ) / HZ;
-+ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ *IXP4XX_OSRT1 = reload;
-
--static unsigned volatile last_jiffy_time;
-+ /* If the clock is drifing, look in syslog: */
-+ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
-+}
-
--#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+/* This returns the time in timer ticks since the 'last_timer_time'
-+ * recorded above. Use this to avoid arithmetic errors because of
-+ * the overflow when the timer wraps.
-+ */
-+static inline u32 ixp4xx_timer_delta(void)
-+{
-+ return *IXP4XX_OSTS - last_timer_time;
-+}
-
- /* IRQs are disabled before entering here from do_gettimeofday() */
- static unsigned long ixp4xx_gettimeoffset(void)
- {
-- u32 elapsed;
--
-- elapsed = *IXP4XX_OSTS - last_jiffy_time;
-+ /* Return the offset of the current time from the last time
-+ * timer tick in microseconds. This is only used for the
-+ * gettimeofday call.
-+ *
-+ * The result of this API is at most about 20000 (for a 50Hz
-+ * HZ - 20000 uS/tick), the input delta is at most about
-+ * 1.3M - 21 bits.
-+ */
-+ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
-+ /* return delta * 1000000 / board_tick_rate; */
-+ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
-+}
-
-- return elapsed / CLOCK_TICKS_PER_USEC;
-+/* This is the correct adjustment to the counter to compensate for an
-+ * error iff timer_count-1 <= exact_count <= timer_count+1
-+ */
-+static inline int adjustment(int error) {
-+ if (error >= HZ)
-+ return 1;
-+ else if (error <= -HZ)
-+ return -1;
-+ return 0;
- }
-
- static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
-+ u32 rate;
-+ u32 count;
-+ int error;
-+
- write_seqlock(&xtime_lock);
-
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-+ /* If the board tick rate has been changed update the cached
-+ * value.
-+ */
-+ if (ixp4xx_board_tick_rate != board_tick_rate) {
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-+ accumulated_error = 0;
-+ }
-+
- /*
- * Catch up with the real idea of time
-+ *
-+ * board_tick_rate: actual ixp4xx ticks/second, read-only
-+ * accumulated_error: aggregate error/tick * HZ, read/write
-+ * timer_count: best ixp4xx ticks per timer_tick, read-only
- */
-- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
-+ rate = board_tick_rate;
-+ error = accumulated_error;
-+ count = timer_count;
-+ do {
-+ u32 adjusted_count = count + adjustment(error);
-+ if (ixp4xx_timer_delta() < adjusted_count)
-+ break;
- timer_tick(regs);
-- last_jiffy_time += LATCH;
-- }
-+ last_timer_time += adjusted_count;
-+ error += rate - adjusted_count*HZ;
-+ } while (1);
-+ accumulated_error = error;
-
- write_sequnlock(&xtime_lock);
-
-@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
- .handler = ixp4xx_timer_interrupt,
- };
-
-+u32 ixp4xx_get_board_tick_rate(void) {
-+ return board_tick_rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
-+
-+void ixp4xx_set_board_tick_rate(u32 rate) {
-+ ixp4xx_board_tick_rate = rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
-+
- static void __init ixp4xx_timer_init(void)
- {
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
- /* Setup the Timer counter value */
-- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-
- /* Reset time-stamp counter */
- *IXP4XX_OSTS = 0;
-- last_jiffy_time = 0;
-+ last_timer_time = 0;
-+ accumulated_error = 0;
-
- /* Connect the interrupt handler and enable the interrupt */
- setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
- ARRAY_SIZE(ixp46x_devices));
- }
- }
--
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-@@ -6,10 +6,23 @@
- #include <asm/hardware.h>
-
- /*
-- * We use IXP425 General purpose timer for our timer needs, it runs at
-- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
-- * timer register ignores the bottom 2 bits of the LATCH value.
-+ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
-+ * is the number of internal counts per timer interrupt. Thus
-+ * CLOCK_TICK_RATE is LATCH*HZ.
-+ *
-+ * The actual values of these numbers do not matter, because they
-+ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
-+ * point number), so the value here gives a LATCH of 1 and pretty
-+ * much guarantees to flush out any off-by-one errors.
-+ *
-+ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
-+ * HZ, this is checked in the ixp4xx/common.c code.
- */
--#define FREQ 66666666
--#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define CLOCK_TICK_RATE HZ
-
-+/* The following allow the exact board tick rate to be set and
-+ * discovered. The value should be exactly twice the frequency
-+ * (in Hz) of the onboard crystal.
-+ */
-+extern u32 ixp4xx_get_board_tick_rate(void);
-+extern void ixp4xx_set_board_tick_rate(u32 new_rate);
diff --git a/packages/linux/nas100d-kernel/2.6.15/91-maclist.patch b/packages/linux/nas100d-kernel/2.6.15/91-maclist.patch
deleted file mode 100644
index 27af1ea639..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/91-maclist.patch
+++ /dev/null
@@ -1,377 +0,0 @@
---- linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,23 @@
-+#ifndef _MACLIST_H
-+#define _MACLIST_H 1
-+/*
-+ * Interfaces to the MAC repository
-+ */
-+/*
-+ * Add a single entry, returns 0 on success else an error
-+ * code. Must *not* be called from an interrupt handler.
-+ */
-+extern int maclist_add(const u8 id_to_add[6]);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+extern int maclist_count(void);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+extern int maclist_read(u8 (*buffer_for_id)[6], int index_of_id_to_return);
-+
-+#endif /*_MACLIST_H*/
---- linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,314 @@
-+/*
-+ * drivers/net/maclist.c
-+ *
-+ * a simple driver to remember ethernet MAC values
-+ *
-+ * Some Ethernet hardware implementations have no built-in
-+ * storage for allocated MAC values - an example is the Intel
-+ * IXP420 chip which has support for Ethernet but no defined
-+ * way of storing allocated MAC values. With such hardware
-+ * different board level implementations store the allocated
-+ * MAC (or MACs) in different ways. Rather than put board
-+ * level code into a specific Ethernet driver this driver
-+ * provides a generally accessible repository for the MACs
-+ * which can be written by board level code and read by the
-+ * driver.
-+ *
-+ * The implementation also allows user level programs to
-+ * access the MAC information in /proc/net/maclist. This is
-+ * useful as it allows user space code to use the MAC if it
-+ * is not used by a built-in driver.
-+ *
-+ * Copyright (C) 2005 John Bowler
-+ * Author: John Bowler <jbowler@acm.org>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * External interfaces:
-+ * Interfaces to linux kernel (and modules)
-+ * maclist_add: add a single MAC
-+ * maclist_count: total number of MACs stored
-+ * maclist_read: read a MAC 0..(maclist_count-1)
-+ */
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/etherdevice.h>
-+#include <linux/proc_fs.h>
-+#include <linux/errno.h>
-+
-+#include <net/maclist.h>
-+
-+#define MACLIST_NAME "maclist"
-+
-+MODULE_AUTHOR("John Bowler <jbowler@acm.org>");
-+MODULE_DESCRIPTION("MAC list repository");
-+MODULE_LICENSE("GPL");
-+
-+typedef struct maclist_entry {
-+ struct maclist_entry *next; /* Linked list, first first */
-+ u8 id[6]; /* 6 byte Ethernet MAC */
-+} maclist_entry_t;
-+
-+/* Access to this list is possible at any time - entries in
-+ * the list are never destroyed. Modification of the list is
-+ * safe only from the init code (i.e. modification must be
-+ * single threaded), but read from an interrupt at the same
-+ * time is possible and safe.
-+ */
-+static maclist_entry_t *maclist_list = 0;
-+
-+/*
-+ * External interfaces.
-+ *
-+ * Add a single entry, returns 0 on success else an error
-+ * code. Must be single threaded.
-+ */
-+int maclist_add(const u8 new_id[6]) {
-+ maclist_entry_t *new_entry, **tail;
-+
-+ if (new_id == 0 || !is_valid_ether_addr(new_id)) {
-+ printk(KERN_ERR MACLIST_NAME ": invalid ethernet address\n");
-+ return -EINVAL;
-+ }
-+ new_entry = kmalloc(sizeof *new_entry, GFP_KERNEL);
-+ if (new_entry == 0)
-+ return -ENOMEM;
-+ new_entry->next = 0;
-+ memcpy(new_entry->id, new_id, sizeof new_entry->id);
-+
-+ tail = &maclist_list;
-+ while (*tail != 0)
-+ tail = &(*tail)->next;
-+ *tail = new_entry;
-+ return 0;
-+}
-+EXPORT_SYMBOL(maclist_add);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+int maclist_count(void) {
-+ maclist_entry_t *tail = maclist_list;
-+ int count = 0;
-+
-+ while (tail != 0) {
-+ tail = tail->next;
-+ ++count;
-+ }
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(maclist_count);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+int maclist_read(u8 (*id)[6], int n) {
-+ maclist_entry_t *entry = maclist_list;
-+
-+ while (n > 0 && entry != 0) {
-+ --n;
-+ entry = entry->next;
-+ }
-+
-+ if (n == 0 && entry != 0) {
-+ memcpy(id, entry->id, sizeof *id);
-+ return 0;
-+ }
-+
-+ printk(KERN_ERR MACLIST_NAME ": id does not exist\n");
-+ return -EINVAL;
-+}
-+EXPORT_SYMBOL(maclist_read);
-+
-+/*
-+ * Parameter parsing. The option string is a list of MAC
-+ * addresses, comma separated. (The parsing really should
-+ * be somewhere central...)
-+ */
-+static int __init maclist_setup(char *param) {
-+ int bytes = 0, seen_a_digit = 0;
-+ u8 id[6];
-+
-+ memset(id, 0, sizeof id);
-+
-+ if (param) do {
-+ int digit = -1;
-+ switch (*param) {
-+ case '0': digit = 0; break;
-+ case '1': digit = 1; break;
-+ case '2': digit = 2; break;
-+ case '3': digit = 3; break;
-+ case '4': digit = 4; break;
-+ case '5': digit = 5; break;
-+ case '6': digit = 6; break;
-+ case '7': digit = 7; break;
-+ case '8': digit = 8; break;
-+ case '9': digit = 9; break;
-+ case 'a': case 'A': digit = 10; break;
-+ case 'b': case 'B': digit = 11; break;
-+ case 'c': case 'C': digit = 12; break;
-+ case 'd': case 'D': digit = 13; break;
-+ case 'e': case 'E': digit = 14; break;
-+ case 'f': case 'F': digit = 15; break;
-+ case ':':
-+ if (seen_a_digit)
-+ bytes = (bytes+1) & ~1;
-+ else
-+ bytes += 2; /* i.e. ff::ff is ff:00:ff */
-+ seen_a_digit = 0;
-+ break;
-+ case 0:
-+ if (bytes == 0) /* nothing new seen so far */
-+ return 0;
-+ /*fall through*/
-+ case ',': case ';':
-+ if (bytes > 0)
-+ bytes = 12; /* i.e. all trailing bytes 0 */
-+ break;
-+ default:
-+ printk(KERN_ERR MACLIST_NAME ": invalid character <%c[%d]>\n",
-+ *param, *param);
-+ return -EINVAL;
-+ }
-+
-+ if (digit >= 0) {
-+ id[bytes>>1] = (id[bytes>>1] << 4) + digit; break;
-+ ++bytes;
-+ seen_a_digit = 1;
-+ }
-+
-+ if (bytes >= 12) {
-+ int rc = maclist_add(id);
-+ if (rc)
-+ return rc;
-+ bytes = 0;
-+ seen_a_digit = 0;
-+ memset(id, 0, sizeof id);
-+ if (*param == 0)
-+ return 0;
-+ }
-+ ++param;
-+ } while (1);
-+
-+ return 0;
-+}
-+
-+/*
-+ * procfs support, if compiled in.
-+ */
-+#ifdef CONFIG_PROC_FS
-+/*
-+ * Character device read
-+ */
-+static int maclist_getchar(off_t n) {
-+ static char xdigit[16] = "0123456789abcdef";
-+ maclist_entry_t *head = maclist_list;
-+ int b;
-+
-+ do {
-+ if (head == 0)
-+ return -1;
-+ if (n < 18)
-+ break;
-+ head = head->next;
-+ n -= 18;
-+ } while (1);
-+
-+ if (n == 17)
-+ return '\n';
-+
-+ b = n/3;
-+ switch (n - b*3) {
-+ case 0: return xdigit[head->id[b] >> 4];
-+ case 1: return xdigit[head->id[b] & 0xf];
-+ default: return ':';
-+ }
-+}
-+
-+/*
-+ * The extensively undocumented proc_read_t callback is implemented here.
-+ * Go look in fs/proc/generic.c:
-+ *
-+ * Prototype:
-+ * int f(char *buffer, char **start, off_t offset,
-+ * int count, int *peof, void *dat)
-+ *
-+ * Assume that the buffer is "count" bytes in size.
-+ *
-+ * 2) Set *start = an address within the buffer.
-+ * Put the data of the requested offset at *start.
-+ * Return the number of bytes of data placed there.
-+ * If this number is greater than zero and you
-+ * didn't signal eof and the reader is prepared to
-+ * take more data you will be called again with the
-+ * requested offset advanced by the number of bytes
-+ * absorbed.
-+ */
-+static int maclist_proc_read(char *buffer, char **start, off_t offset,
-+ int count, int *peof, void *dat) {
-+ int total;
-+
-+ *start = buffer;
-+ total = 0;
-+
-+ while (total < count) {
-+ int ch = maclist_getchar(offset++);
-+ if (ch == -1) {
-+ *peof = 1;
-+ break;
-+ }
-+ *buffer++ = ch;
-+ ++total;
-+ }
-+
-+ return total;
-+}
-+#endif
-+
-+/*
-+ * Finally, the init/exit functions.
-+ */
-+static void __exit maclist_exit(void)
-+{
-+ maclist_entry_t *list;
-+
-+ remove_proc_entry(MACLIST_NAME, proc_net);
-+
-+ list = maclist_list;
-+ maclist_list = 0;
-+
-+ while (list != 0) {
-+ maclist_entry_t *head = list;
-+ list = head->next;
-+ kfree(head);
-+ }
-+}
-+
-+#ifdef MODULE
-+static char ids[256];
-+module_param_string(ids, ids, sizeof ids, 0);
-+MODULE_PARM_DESC(ids, "comma separated list of MAC ids\n");
-+#else
-+__setup("maclist_ids=", maclist_setup);
-+#endif
-+
-+static int __init maclist_init(void)
-+{
-+# ifdef MODULE
-+ if (ids[0])
-+ maclist_setup(ids);
-+# endif
-+
-+ /* Ignore failure, the module will still work. */
-+ (void)create_proc_read_entry(MACLIST_NAME, S_IRUGO, proc_net, maclist_proc_read, NULL);
-+
-+ return 0;
-+}
-+
-+module_init(maclist_init);
-+module_exit(maclist_exit);
---- linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -70,6 +70,7 @@ obj-$(CONFIG_RIONET) += rionet.o
- # end link order section
- #
-
-+obj-$(CONFIG_MACLIST) += maclist.o
- obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_PHYLIB) += phy/
-
---- linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -166,6 +166,21 @@ config NET_ETHERNET
- kernel: saying N will just cause the configurator to skip all
- the questions about Ethernet network cards. If unsure, say N.
-
-+config MACLIST
-+ tristate "Ethernet MAC repository"
-+ depends on NET_ETHERNET
-+ help
-+ Some ethernet controllers have no built-in way of obtaining an
-+ appropriate Ethernet MAC address. Such controllers have to be
-+ initialised in a board-specific way, depending on how the allocated
-+ MAC is stored. The MAC repository provides a set of APIs and a
-+ proc entry (/proc/net/maclist) to store MAC values from the board
-+ so that such drivers can obtain a MAC address without board-specific
-+ code. You do not need to enable this device - it will be selected
-+ automatically by any device which requires it. It is only useful
-+ to enable it manually when building a device driver independently
-+ of the kernel build.
-+
- config MII
- tristate "Generic Media Independent Interface device support"
- depends on NET_ETHERNET
diff --git a/packages/linux/nas100d-kernel/2.6.15/92-nas100d-maclist.patch b/packages/linux/nas100d-kernel/2.6.15/92-nas100d-maclist.patch
deleted file mode 100644
index 3143850b22..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/92-nas100d-maclist.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -74,6 +74,7 @@ comment "IXP4xx Platforms"
- config MACH_NAS100D
- bool
- prompt "NAS100D"
-+ select MACLIST
- help
- Say 'Y' here if you want your kernel to support Iomega's
- NAS 100d device. For more information on this platform,
---- linux-2.6.15/arch/arm/mach-ixp4xx/nas100d-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nas100d-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -14,11 +14,14 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/mtd/mtd.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-
-+#include <net/maclist.h>
-+
- static struct flash_platform_data nas100d_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-@@ -110,8 +113,44 @@
- gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
-+/*
-+ * When the RedBoot config partition is added the MAC address is read from
-+ * it.
-+ */
-+void flash_add(struct mtd_info *mtd) {
-+ if (strcmp(mtd->name, "RedBoot config") == 0) {
-+ size_t retlen;
-+ u_char mac[6];
-+
-+ /* The MAC is at a known offset... */
-+ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) {
-+ printk(KERN_INFO "NAS100D MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+ maclist_add(mac);
-+ } else {
-+ printk(KERN_ERR "NAS100D MAC: read failed\n");
-+ }
-+ }
-+}
-+
-+/*
-+ * Nothing to do on remove at present.
-+ */
-+void flash_remove(struct mtd_info *mtd) {
-+}
-+
-+struct mtd_notifier flash_notifier = {
-+ .add = flash_add,
-+ .remove = flash_remove,
-+};
-+
- static void __init nas100d_init(void)
- {
-+ /* The flash has an ethernet MAC embedded in it which we need,
-+ * that is all this notifier does.
-+ */
-+ register_mtd_user(&flash_notifier);
-+
- ixp4xx_sys_init();
-
- pm_power_off = nas100d_power_off;
diff --git a/packages/linux/nas100d-kernel/2.6.15/anonymiser.patch b/packages/linux/nas100d-kernel/2.6.15/anonymiser.patch
deleted file mode 100644
index 3384b15fe2..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/anonymiser.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- linux-2.6.11.2/scripts/mkcompile_h.orig 2005-05-07 05:27:02.440000000 +0000
-+++ linux-2.6.11.2/scripts/mkcompile_h 2005-05-07 05:28:30.360000000 +0000
-@@ -43,16 +43,9 @@
- echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
-
- echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
-- echo \#define LINUX_COMPILE_BY \"`whoami`\"
-- echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
--
-- if [ -x /bin/dnsdomainname ]; then
-- echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname | $UTS_TRUNCATE`\"
-- elif [ -x /bin/domainname ]; then
-- echo \#define LINUX_COMPILE_DOMAIN \"`domainname | $UTS_TRUNCATE`\"
-- else
-- echo \#define LINUX_COMPILE_DOMAIN
-- fi
-+ echo \#define LINUX_COMPILE_BY \"openslug\"
-+ echo \#define LINUX_COMPILE_HOST \"openslug.org\"
-+ echo \#define LINUX_COMPILE_DOMAIN \"openslug.org\"
-
- echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | tail -n 1`\"
- ) > .tmpcompile
diff --git a/packages/linux/nas100d-kernel/2.6.15/defconfig b/packages/linux/nas100d-kernel/2.6.15/defconfig
deleted file mode 100644
index 3f7bbe9aa5..0000000000
--- a/packages/linux/nas100d-kernel/2.6.15/defconfig
+++ /dev/null
@@ -1,1672 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Sun Nov 13 02:06:49 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_MACH_NSLU2 is not set
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-CONFIG_MACH_NAS100D=y
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=jffs2 mem=64M@0x00000000 init=/linuxrc pcf8563.hctosys=1 console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=m
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=n
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MACLIST=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-CONFIG_RTC_PCF8563_I2C=y
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-# CONFIG_VIDEO_SAA7134_ALSA is not set
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_CLASS=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_NATIVE_ENDIAN is not set
-CONFIG_JFFS2_BIG_ENDIAN=y
-# CONFIG_JFFS2_LITTLE_ENDIAN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/packages/linux/nas100d-kernel_2.6.15.bb b/packages/linux/nas100d-kernel_2.6.15.bb
deleted file mode 100644
index 092f5ffc31..0000000000
--- a/packages/linux/nas100d-kernel_2.6.15.bb
+++ /dev/null
@@ -1,34 +0,0 @@
-# Kernel for Iomega NAS 100d
-#
-# Increment PR_CONFIG for changes to the nas100d-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r2.${PR_CONFIG}"
-
-include nas100d-kernel.inc
-
-# N1K_PATCHES - full list of patches to apply
-N1K_PATCHES = "\
- file://00-memory-h-page-shift.patch;patch=1 \
- file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
- file://15-jffs2-endian-config.patch;patch=1 \
- file://40-rtc-class.patch;patch=1 \
- file://50-nas100d-arch.patch;patch=1 \
- file://60-nas100d-ide.patch;patch=1 \
- file://60-nas100d-i2c.patch;patch=1 \
- file://85-timer.patch;patch=1 \
- file://91-maclist.patch;patch=1 \
- file://92-nas100d-maclist.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nas100d-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "pcf8563.hctosys=1"