diff options
Diffstat (limited to 'packages/linux')
| -rw-r--r-- | packages/linux/linux-rp-2.6.21/locomo_spi-r4.patch | 947 | ||||
| -rw-r--r-- | packages/linux/linux-rp-2.6.21/sharpsl_pm-r1.patch | 213 | ||||
| -rw-r--r-- | packages/linux/linux-rp_2.6.21.bb | 24 | ||||
| -rw-r--r-- | packages/linux/linux-x86-2.6.20/i486-defconfig | 256 | ||||
| -rw-r--r-- | packages/linux/linux-x86_2.6.20.bb | 11 | ||||
| -rw-r--r-- | packages/linux/linux.inc | 2 | ||||
| -rw-r--r-- | packages/linux/linux/sarge-at91/.mtn2git_empty | 0 | ||||
| -rw-r--r-- | packages/linux/linux/sarge-at91/2.6.21-sarge-kernel.patch | 238 | ||||
| -rw-r--r-- | packages/linux/linux/sarge-at91/2.6.21-sarge-mmc.patch | 87 | ||||
| -rw-r--r-- | packages/linux/linux/sarge-at91/2.6.21-sarge-phy.patch | 400 | ||||
| -rw-r--r-- | packages/linux/linux/sarge-at91/defconfig | 1909 | ||||
| -rw-r--r-- | packages/linux/linux_2.6.21.bb | 6 |
12 files changed, 4010 insertions, 83 deletions
diff --git a/packages/linux/linux-rp-2.6.21/locomo_spi-r4.patch b/packages/linux/linux-rp-2.6.21/locomo_spi-r4.patch new file mode 100644 index 0000000000..7ecc48f956 --- /dev/null +++ b/packages/linux/linux-rp-2.6.21/locomo_spi-r4.patch @@ -0,0 +1,947 @@ +Index: linux-2.6.21/drivers/spi/Kconfig +=================================================================== +--- linux-2.6.21.orig/drivers/spi/Kconfig 2007-04-26 05:08:32.000000000 +0200 ++++ linux-2.6.21/drivers/spi/Kconfig 2007-07-03 21:40:52.000000000 +0200 +@@ -89,6 +89,10 @@ + This enables using the Freescale iMX SPI controller in master + mode. + ++config SPI_LOCOMO ++ tristate "Locomo SPI master" ++ depends on SPI_MASTER && SHARP_LOCOMO && EXPERIMENTAL ++ + config SPI_MPC83xx + tristate "Freescale MPC83xx SPI controller" + depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL +Index: linux-2.6.21/drivers/spi/locomo_spi.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21/drivers/spi/locomo_spi.c 2007-07-03 21:40:52.000000000 +0200 +@@ -0,0 +1,873 @@ ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/stat.h> ++#include <linux/delay.h> ++#include <linux/interrupt.h> ++#include <asm/hardware/locomo.h> ++#include <linux/mmc/host.h> ++#include <linux/spi/spi.h> ++#include <linux/spi/mmc_spi.h> ++#include <linux/workqueue.h> ++#include <linux/spinlock.h> ++#include <linux/list.h> ++#include "locomo_spi.h" ++static struct locomospi_dev * spidev; ++static struct work_struct transfer_wq; ++int verbose=0; ++/* MMC_SPI functions *********************************************************/ ++ ++static int locomommcspi_init(struct device *dev, irqreturn_t (*isr)(int, void*), void *mmc) ++{ ++ int result; ++ locomo_gpio_set_irq(spidev->ldev->dev.parent, LOCOMO_GPIO_CARD_DETECT, LOCOMO_GPIO_IRQ_ON_RISE | LOCOMO_GPIO_IRQ_ON_FALL); ++ spidev->mmc_spi_isr = isr; ++ result=request_irq(IRQ_LOCOMO_CARDDETECT, locomospi_cardisr, SA_SHIRQ, "locomo-spi", mmc); ++ return result; ++} ++ ++static void locomommcspi_exit(struct device *dev, void* mmc) ++{ ++ free_irq(IRQ_LOCOMO_CARDDETECT, mmc); ++} ++ ++static int locomommcspi_getro(struct device *dev) ++{ ++ return locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_WRITE_PROTECT) > 0 ? 1 : 0; ++} ++ ++static void locomommcspi_powermode(struct device *dev, unsigned char mode) ++{ ++ if(mode == MMC_POWER_OFF && spidev->card_power != 0) ++ locomospi_power(0); ++ else if( spidev->card_power != 1) ++ locomospi_power(1); ++ ++} ++ ++static void locomommcspi_reset(void) ++{ ++ /* transmit card reset sequence, should be done from mmc_layer */ ++ locomospi_setcs(1); ++ tx("\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",10); ++ locomospi_setcs(0); ++} ++ ++ ++static struct mmc_spi_platform_data colliemmc ={ ++ .init = locomommcspi_init, ++ .exit = locomommcspi_exit, ++ .detect_delay = HZ, ++ .get_ro = locomommcspi_getro, ++ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, ++ .setpowermode = locomommcspi_powermode, ++ .reset = locomommcspi_reset, ++}; ++ ++/* Utility function **********************************************************/ ++ ++static irqreturn_t locomospi_cardisr(int irq, void *dev_id) ++{ ++ u16 r; ++ if(locomospi_carddetect()){ ++ r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ r |= 0x80; ++ locomo_writel( r, spidev->base+LOCOMO_SPIMD); ++ r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ r |= 0x40; ++ locomo_writel( r, spidev->base+LOCOMO_SPIMD); ++ /* transmit card reset sequence, should be done from mmc_layer */ ++// locomospi_setcs(1); ++ // tx("\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",10); ++// locomospi_setcs(0); ++ } else { ++ r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ r &= ~0x80; ++ locomo_writel( r, spidev->base+LOCOMO_SPIMD); ++ r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ r &= ~0x40; ++ locomo_writel( r, spidev->base+LOCOMO_SPIMD); ++ } ++ return spidev->mmc_spi_isr(irq, dev_id); ++} ++ ++static void locomospi_power(int on) ++{ ++ locomo_gpio_write(spidev->ldev->dev.parent, LOCOMO_GPIO_CARD_POWER, on); ++ spidev->card_power=on; ++ set_current_state(TASK_INTERRUPTIBLE); ++ if(on){ ++ schedule_timeout(HZ/10); ++ } else { ++ schedule_timeout(2*HZ); ++ } ++ ++} ++ ++static void locomospi_setclock(unsigned int base, unsigned int mult) ++{ ++ u16 r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ base &= 0x7; ++ mult &= 0x3; ++ r &= ~(0x7 | 0x18 | 0x40); ++ locomo_writel(r,spidev->base+LOCOMO_SPIMD); ++ r |= (base | (mult <<3) | 0x40); ++ locomo_writel(r,spidev->base+LOCOMO_SPIMD); ++ spidev->clock_base = base; ++ spidev->clock_mult = mult; ++ ++} ++// returns 1 if card ist present, 0 otherwise ++static int locomospi_carddetect() ++{ ++ return (locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_CARD_DETECT)>0)?0:1; ++} ++ ++static void locomospi_togglecs() ++{ ++ u16 r; ++ r = locomo_readl(spidev->base + LOCOMO_SPICT); ++ r ^= 0x40; // I think this is CHIPSELECTHIGH ++ locomo_writel(r, spidev->base + LOCOMO_SPICT); ++} ++ ++static void locomospi_setcs(int high) ++{ ++ u16 r; ++ r = locomo_readl(spidev->base + LOCOMO_SPICT); ++ if(high) ++ r |= 0x40; ++ else ++ r &= ~0x40; ++ locomo_writel(r, spidev->base + LOCOMO_SPICT); ++} ++ ++static void locomospi_reg_open() ++{ ++ u16 r; ++ spidev->clock_base = 4; ++ spidev->clock_mult = 0; ++ locomospi_power(1); ++ locomo_writel( 0x6c00 | (2 <<3)|4, spidev->base+LOCOMO_SPIMD); ++ if(locomospi_carddetect()){ ++ r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ r |= 0x80; ++ locomo_writel( r, spidev->base+LOCOMO_SPIMD); ++ r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ r |= 0x40; ++ locomo_writel( r, spidev->base+LOCOMO_SPIMD); ++ } ++ locomo_writel( 0x40, spidev->base+LOCOMO_SPICT); ++ r = locomo_readl(spidev->base+LOCOMO_SPICT); ++ r |= 0x80; ++ locomo_writel( r, spidev->base+LOCOMO_SPICT); ++ udelay(200); ++ r = locomo_readl(spidev->base+LOCOMO_SPICT); ++ locomo_writel(r, spidev->base+LOCOMO_SPICT); ++ r = locomo_readl(spidev->base+LOCOMO_SPICT); ++ r |= 0x1; ++ locomo_writel(r, spidev->base+LOCOMO_SPICT); ++ r = locomo_readl(spidev->base+LOCOMO_SPICT); ++ r &= ~0x40; ++ locomo_writel(r, spidev->base+LOCOMO_SPICT); ++} ++ ++static void locomospi_reg_release() ++{ ++ u16 r; ++ r = locomo_readl(spidev->base+LOCOMO_SPICT); ++ r &= ~0x80; ++ locomo_writel(r, spidev->base+LOCOMO_SPICT); ++ r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ r &= ~0x40; ++ locomo_writel(r, spidev->base+LOCOMO_SPIMD); ++ r = locomo_readl(spidev->base+LOCOMO_SPIMD); ++ r &= ~0x80; ++ locomo_writel(r, spidev->base+LOCOMO_SPIMD); ++ r = locomo_readl(spidev->base+LOCOMO_SPICT); ++ r |= 0x40; ++ locomo_writel(r, spidev->base+LOCOMO_SPICT); ++ locomospi_power(0); ++} ++ ++static int tx(const char* buffer, int size) ++{ ++ int i=0,j=0; ++// int result=0; ++ int wait; ++ if(!spidev->clock_base && !spidev->clock_mult) ++ return 0; ++ if(spidev->clock_base == 4) ++ wait = 0x10000; ++ else ++ wait = 8; ++ ++ for(i=0; i<size; i++){ ++/* if(!(locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW)){ ++ result = wait_event_interruptible(spidev->waitqueue, locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW); ++ if(result) { ++ dev_err(&spidev->sdev->dev, "received Signal. giving up tx."); ++ return i; ++ } ++ }*/ ++ for(j=0; j <= wait; j++){ ++ if(locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW) ++ break; ++ } ++ locomo_writel((u16) buffer[i], spidev->base+LOCOMO_SPITD); ++ if(verbose) ++ printk(KERN_DEBUG "locomospi: sent: char :%x\n", (u16) buffer[i]); ++ if(spidev->clock_base){ ++ for(j=0; j <= wait; j++){ ++ if(!(locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW)) ++ break; ++ } ++ } ++ } ++ if(spidev->clock_base){ ++ for(i=0; i <= wait; i++){ ++ if(locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_TEND) ++ break; ++ } ++ } ++ return j; ++} ++ ++static int rx(char* buffer, int size) ++{ ++ int i,j; ++// int result=0; ++ int wait; ++ u16 rd; ++ if(!spidev->clock_base && !spidev->clock_mult) ++ return 0; ++ if(spidev->clock_base == 4) ++ wait = 0x10000; ++ else ++ wait = 8; ++ ++ for(i=0; i<size; i++){ ++/* if(!(locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW)){ ++ result = wait_event_interruptible(spidev->waitqueue, locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW); ++ if(result) { ++ dev_err(&spidev->sdev->dev, "received Signal. giving up tx."); ++ return i; ++ } ++ }*/ ++ for(j=0; j <= wait; j++){ ++ if(locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFR) ++ break; ++ } ++ rd= locomo_readl(spidev->base+LOCOMO_SPIRD); ++ if(verbose) ++ printk(KERN_DEBUG "locomospi: received: char :%x\n", (u16) buffer[i]); ++ buffer[i]=(char) rd; ++ if(spidev->clock_base){ ++ for(j=0; j <= wait; j++){ ++ if(!(locomo_readl(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFR)) ++ break; ++ } ++ } ++ } ++ return i; ++} ++ ++/* ++static irqreturn_t locomospi_rwready(int irq, void *dev_id) ++{ ++ struct locomospi_dev* dev=(struct locomospi_dev*) dev_id; ++// dev_dbg(&spidev->sdev->dev, "IRQ: %d\n", irq); ++// printk(KERN_DEBUG "locomospi: IRQ: %d\n", irq); ++ wake_up_interruptible(&dev->waitqueue); ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t locomospi_testisr(int irq, void *dev_id) ++{ ++ char *buf=""; ++ switch(irq){ ++ case IRQ_LOCOMO_SPI_RFR: buf="RFR"; ++ break; ++ case IRQ_LOCOMO_SPI_RFW: buf="RFW"; ++ break; ++ case IRQ_LOCOMO_SPI_OVRN:buf="OVRN"; ++ break; ++ case IRQ_LOCOMO_SPI_TEND:buf="TEND"; ++ break; ++ case IRQ_LOCOMO_CARDDETECT: ++ buf="CARD_DETECT"; ++ break; ++ default: return IRQ_NONE; ++ } ++ printk(KERN_DEBUG "locomospi: IRQ: %s\n",buf); ++// dev_dbg(&spidev->sdev->dev, "IRQ: %s\n",buf); ++ return IRQ_HANDLED; ++} ++*/ ++/* sysfs attributes used for debug *******************************************/ ++ ++/* SPI registers */ ++ssize_t locomospi_showspimd(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPIMD)); ++} ++ ++ssize_t locomospi_storespimd(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIMD); ++ return count; ++} ++static DRIVER_ATTR(spimd, S_IWUSR | S_IRUGO, locomospi_showspimd, locomospi_storespimd); ++ ++ssize_t locomospi_showspict(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPICT)); ++} ++ ++ssize_t locomospi_storespict(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPICT); ++ return count; ++} ++static DRIVER_ATTR(spict, S_IWUSR | S_IRUGO, locomospi_showspict, locomospi_storespict); ++ ++ssize_t locomospi_showspist(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPIST)); ++} ++ ++ssize_t locomospi_storespist(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIST); ++ return count; ++} ++static DRIVER_ATTR(spist, S_IWUSR | S_IRUGO, locomospi_showspist, locomospi_storespist); ++ ++ssize_t locomospi_showspiis(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPIIS)); ++} ++ ++ssize_t locomospi_storespiis(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIIS); ++ return count; ++} ++static DRIVER_ATTR(spiis, S_IWUSR | S_IRUGO, locomospi_showspiis, locomospi_storespiis); ++ ++ssize_t locomospi_showspiwe(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPIWE)); ++} ++ ++ssize_t locomospi_storespiwe(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIWE); ++ return count; ++} ++static DRIVER_ATTR(spiwe, S_IWUSR | S_IRUGO, locomospi_showspiwe, locomospi_storespiwe); ++ ++ssize_t locomospi_showspiie(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPIIE)); ++} ++ ++ssize_t locomospi_storespiie(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIIE); ++ return count; ++} ++static DRIVER_ATTR(spiie, S_IWUSR | S_IRUGO, locomospi_showspiie, locomospi_storespiie); ++ ++ssize_t locomospi_showspiir(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPIIR)); ++} ++ ++ssize_t locomospi_storespiir(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIIR); ++ return count; ++} ++static DRIVER_ATTR(spiir, S_IWUSR | S_IRUGO, locomospi_showspiir, locomospi_storespiir); ++ ++ssize_t locomospi_showspitd(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPITD)); ++} ++ ++ssize_t locomospi_storespitd(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPITD); ++ return count; ++} ++static DRIVER_ATTR(spitd, S_IWUSR | S_IRUGO, locomospi_showspitd, locomospi_storespitd); ++ ++ssize_t locomospi_showspird(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPIRD)); ++} ++ ++ssize_t locomospi_storespird(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIRD); ++ return count; ++} ++static DRIVER_ATTR(spird, S_IWUSR | S_IRUGO, locomospi_showspird, locomospi_storespird); ++ ++ssize_t locomospi_showspits(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPITS)); ++} ++ ++ssize_t locomospi_storespits(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPITS); ++ return count; ++} ++static DRIVER_ATTR(spits, S_IWUSR | S_IRUGO, locomospi_showspits, locomospi_storespits); ++ ++ssize_t locomospi_showspirs(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", locomo_readl(spidev->base+LOCOMO_SPIRS)); ++} ++ ++ssize_t locomospi_storespirs(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomo_writel(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIRS); ++ return count; ++} ++static DRIVER_ATTR(spirs, S_IWUSR | S_IRUGO, locomospi_showspirs, locomospi_storespirs); ++ ++/* MMC Card status */ ++ ++ssize_t locomospi_showpower(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n", spidev->card_power); ++} ++ ++ssize_t locomospi_storepower(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomospi_power(simple_strtoul(buf, NULL, 10)); ++ return count; ++} ++static DRIVER_ATTR(cardpower, S_IWUSR | S_IRUGO, locomospi_showpower, locomospi_storepower); ++ ++ssize_t locomospi_detectcard(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n",(locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_CARD_DETECT)>0)?0:1); ++} ++static DRIVER_ATTR(carddetect, S_IRUGO, locomospi_detectcard, NULL); ++ ++ssize_t locomospi_writeprotect(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n",(locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_WRITE_PROTECT)>0)?1:0); ++} ++static DRIVER_ATTR(cardwriteprotect, S_IRUGO, locomospi_writeprotect, NULL); ++ ++ssize_t locomospi_showclockbase(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n", spidev->clock_base); ++} ++ ++ssize_t locomospi_storeclockbase(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomospi_setclock(simple_strtoul(buf, NULL, 10), spidev->clock_mult); ++ return count; ++} ++static DRIVER_ATTR(clockbase, S_IWUSR | S_IRUGO, locomospi_showclockbase, locomospi_storeclockbase); ++ ++ssize_t locomospi_showclockmult(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n", spidev->clock_mult); ++} ++ ++ssize_t locomospi_storeclockmult(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomospi_setclock(spidev->clock_base, simple_strtoul(buf, NULL, 10)); ++ return count; ++} ++static DRIVER_ATTR(clockmult, S_IWUSR | S_IRUGO, locomospi_showclockmult, locomospi_storeclockmult); ++ ++/* debug */ ++ ++ssize_t locomospi_reset(struct device_driver *drv, const char *buf, size_t count) ++{ ++ int choice = simple_strtoul(buf, NULL, 10); ++// char buff[10]; ++ switch(choice){ ++ case 0: locomospi_reg_release(); ++ locomospi_reg_open(); ++ break; ++ case 1: tx("\x40\x00\x00\x00\x00\x95",6); ++ break; ++ case 2: locomospi_setcs(1); ++ tx("\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",10); ++ locomospi_setcs(0); ++ break; ++ default: /* do nothing */; ++ } ++ return count; ++} ++static DRIVER_ATTR(reset, S_IWUSR, NULL, locomospi_reset); ++ ++ssize_t locomospi_showverbose(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n", verbose); ++} ++ ++ssize_t locomospi_storeverbose(struct device_driver *drv, const char *buf, size_t count) ++{ ++ verbose=simple_strtoul(buf, NULL, 10); ++ return count; ++} ++static DRIVER_ATTR(verbose, S_IWUSR | S_IRUGO, locomospi_showverbose, locomospi_storeverbose); ++ ++/* SPI functions *************************************************************/ ++ ++static void locomospi_do_transfer(struct work_struct *wrk) ++{ ++ struct list_head *mptr, *tptr, *mptr2; ++ struct spi_transfer *entry; ++ struct spi_message *msg; ++ ++ list_for_each_safe(mptr, mptr2, &spidev->message_list){ ++ int i; ++ msg = list_entry(mptr, struct spi_message, queue); ++ ++ msg->status = 0; ++ msg->actual_length = 0; ++ list_for_each(tptr, &msg->transfers){ ++ entry = list_entry(tptr, struct spi_transfer, transfer_list); ++ if(entry->tx_buf && entry->rx_buf){ //duplex ++ for(i=0; i< entry->len; i++){ ++ tx(((char*) entry->tx_buf)+i*sizeof(char),1); ++ rx(((char*) entry->rx_buf)+i*sizeof(char),1); ++ } ++ msg->actual_length += entry->len; ++ } else if(entry->tx_buf && !entry->rx_buf){ //write ++ tx((char*) entry->tx_buf, entry->len); ++ msg->actual_length += entry->len; ++ } else if(!entry->tx_buf && entry->rx_buf){ //read ++ rx((char*) entry->rx_buf, entry->len); ++ msg->actual_length += entry->len; ++ } else if(!entry->tx_buf && !entry->rx_buf){ //error ++ dev_err(&spidev->sdev->dev, "do_transfer: no buffers allocated\n"); ++ msg->status = -EFAULT; ++ } ++ } ++ spin_lock(&spidev->message_lock); ++ list_del(mptr); ++ spin_unlock(&spidev->message_lock); ++ msg->complete(msg->context); ++ } ++} ++ ++static int locomospi_setup(struct spi_device *spi) ++{ ++ if((spi->mode & SPI_CS_HIGH) != (spidev->spimode & SPI_CS_HIGH)) ++ locomospi_togglecs(); ++ spidev->spimode = spi->mode; ++ ++ if(spi->max_speed_hz == 0) ++ locomospi_setclock(0, 0); ++ else if(spi->max_speed_hz >= 25000000) ++ locomospi_setclock(0, 2); ++ else if(spi->max_speed_hz >= 22500000) ++ locomospi_setclock(0, 1); ++ else if(spi->max_speed_hz >= 12500000) ++ locomospi_setclock(1, 2); ++ else if(spi->max_speed_hz >= 10000000) ++ locomospi_setclock(1, 1); ++ else if(spi->max_speed_hz >= 9000000) ++ locomospi_setclock(1, 0); ++ else if(spi->max_speed_hz >= 6230000) ++ locomospi_setclock(2, 2); ++ else if(spi->max_speed_hz >= 5660000) ++ locomospi_setclock(2, 1); ++ else if(spi->max_speed_hz >= 4640000) ++ locomospi_setclock(2, 0); ++ else if(spi->max_speed_hz >= 3030000) ++ locomospi_setclock(3, 2); ++ else if(spi->max_speed_hz >= 2870000) ++ locomospi_setclock(3, 1); ++ else if(spi->max_speed_hz >= 2330000) ++ locomospi_setclock(3, 0); ++ else if(spi->max_speed_hz >= 383000) ++ locomospi_setclock(4, 2); ++ else if(spi->max_speed_hz >= 350000) ++ locomospi_setclock(4, 1); ++ else ++ locomospi_setclock(4, 0); ++ return 0; ++} ++ ++static int locomospi_transfer(struct spi_device *spi, struct spi_message *msg) ++{ ++ ++ spin_lock(&spidev->message_lock); ++ list_add_tail(&msg->queue, &spidev->message_list); ++ spin_unlock(&spidev->message_lock); ++ schedule_work(&transfer_wq); ++ return 0; ++} ++ ++static struct locomo_driver locomo_spi_driver = { ++ .drv = { ++ .name = "locomo-spi", ++ }, ++ .devid = LOCOMO_DEVID_SPI, ++ .probe = locomospi_probe, ++ .remove = locomospi_remove, ++#ifdef CONFIG_PM ++ .suspend = locomospi_suspend, ++ .resume = locomospi_resume, ++#endif ++}; ++ ++static struct spi_board_info board = { ++ .modalias = "mmc_spi", ++ .platform_data = (void*) &colliemmc, ++ .controller_data= NULL, ++ .irq = 0, ++ .max_speed_hz = 25000000, ++ .bus_num = 0, ++ .chip_select = 0, ++ .mode = 0, ++}; ++ ++#ifdef CONFIG_PM ++static int locomospi_suspend(struct locomo_dev *dev, pm_message_t state) ++{ ++ disable_irq(IRQ_LOCOMO_CARDDETECT); ++ return 0; ++} ++ ++static int locomospi_resume(struct locomo_dev *dev) ++{ ++ enable_irq(IRQ_LOCOMO_CARDDETECT); ++ return 0; ++} ++#endif ++ ++static int locomospi_probe(struct locomo_dev *dev) ++{ ++ int result=0; ++ printk(KERN_DEBUG "Collie MMC over SPI Driver\n"); ++ spidev=kmalloc(sizeof(struct locomospi_dev),GFP_KERNEL); ++ if(!spidev){ ++ return -ENOMEM; ++ } ++ spidev->ldev = dev; ++ spidev->card_power = 0; ++ spidev->spimode = 0; ++ if(!request_mem_region((unsigned long) dev->mapbase, dev->length, LOCOMO_DRIVER_NAME(dev))) { ++ dev_err(&dev->dev, " Can't aquire access to io memory\n"); ++ return -EBUSY; ++ } ++ spidev->base=(unsigned long) dev->mapbase; ++ ++ locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_CARD_POWER, 0); ++ locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_CARD_DETECT, 1); ++ locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_WRITE_PROTECT, 1); ++ ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_cardpower); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_carddetect); ++ if(result){ ++ dev_err(&dev->dev,"error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_cardwriteprotect); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spimd); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spict); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spist); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spiis); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spiwe); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spiie); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spiir); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spitd); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spird); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spits); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spirs); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_clockbase); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_clockmult); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_reset); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_verbose); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ INIT_WORK(&transfer_wq, locomospi_do_transfer); ++ INIT_LIST_HEAD(&spidev->message_list); ++ spin_lock_init(&spidev->message_lock); ++ init_waitqueue_head(&spidev->waitqueue); ++ spidev->master=spi_alloc_master(&dev->dev,0); ++ if(!spidev->master){ ++ result=-ENOMEM; ++ goto region; ++ } ++ spidev->master->bus_num = 0; ++ spidev->master->num_chipselect = 0; ++ spidev->master->setup = locomospi_setup; ++ spidev->master->transfer = locomospi_transfer; ++ spidev->sdev = spi_new_device(spidev->master, &board); ++ if(!spidev->sdev){ ++ dev_err(&dev->dev, "failed to register spi device\n"); ++ goto master; ++ } ++/* result=request_irq(IRQ_LOCOMO_SPI_RFR, locomospi_rwready, SA_SHIRQ, "locomo-spi", (void*) spidev); ++ if(result) { ++ dev_err(&dev->dev, "Could not get IRQ: RFR\n"); ++ goto regdev; ++ } ++ result=request_irq(IRQ_LOCOMO_SPI_RFW, locomospi_rwready, SA_SHIRQ, "locomo-spi", (void*) spidev); ++ if(result) { ++ dev_err(&dev->dev, "Could not get IRQ: RFW\n"); ++ goto irq1; ++ } ++ result=request_irq(IRQ_LOCOMO_SPI_OVRN, locomospi_testisr, SA_SHIRQ, "locomo-spi", (void*) spidev); ++ if(result) { ++ dev_err(&dev->dev, "Could not get IRQ: OVRN\n"); ++ goto irq2; ++ }*/ ++/* result=request_irq(IRQ_LOCOMO_SPI_TEND, locomospi_testisr, SA_SHIRQ, "locomo-spi", (void*) spidev); ++ if(result) { ++ dev_err(&dev->dev, "Could not get IRQ: TEND\n"); ++ goto irq3; ++ }*/ ++ locomospi_reg_open(); ++ spidev->workqueue = create_singlethread_workqueue("locomo-spi"); ++ if(!spidev->workqueue){ ++ dev_err(&dev->dev, "failed to create workqueue\n"); ++ goto irq3; ++ } ++ result=spi_register_master(spidev->master); ++ if(result){ ++ dev_err(&dev->dev, "failed to register spimaster\n"); ++ goto wq; ++ } ++ return 0; ++wq: ++ destroy_workqueue(spidev->workqueue); ++irq3: ++// free_irq(IRQ_LOCOMO_SPI_OVRN, (void*) spidev); ++//irq2: ++// free_irq(IRQ_LOCOMO_SPI_RFW, (void*) spidev); ++//irq1: ++// free_irq(IRQ_LOCOMO_SPI_RFR, (void*) spidev); ++//regdev: ++ spi_unregister_device(spidev->sdev); ++master: ++ spi_master_put(spidev->master); ++region: ++ release_mem_region((unsigned long) dev->mapbase, dev->length); ++ kfree(spidev); ++ return result; ++ ++} ++ ++static int locomospi_remove(struct locomo_dev *dev) ++{ ++ spi_unregister_device(spidev->sdev); ++ spi_unregister_master(spidev->master); ++ destroy_workqueue(spidev->workqueue); ++ locomospi_reg_release(); ++// free_irq(IRQ_LOCOMO_SPI_TEND, (void*) spidev); ++// free_irq(IRQ_LOCOMO_SPI_OVRN, (void*) spidev); ++// free_irq(IRQ_LOCOMO_SPI_RFW, (void*) spidev); ++// free_irq(IRQ_LOCOMO_SPI_RFR, (void*) spidev); ++ spi_master_put(spidev->master); ++ release_mem_region((unsigned long) dev->mapbase, dev->length); ++ kfree(spidev); ++ return 0; ++} ++ ++ ++ ++static int __init locomospi_init(void) ++{ ++ int ret = locomo_driver_register(&locomo_spi_driver); ++ if (ret) ++ return ret; ++ ++ ++ return 0; ++} ++ ++static void __exit locomospi_exit(void) ++{ ++ locomo_driver_unregister(&locomo_spi_driver); ++} ++ ++module_init(locomospi_init); ++module_exit(locomospi_exit); ++ ++MODULE_AUTHOR("Thomas Kunze thommy@tabao.de"); ++MODULE_DESCRIPTION("Collie mmc driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.21/drivers/spi/locomo_spi.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21/drivers/spi/locomo_spi.h 2007-07-03 21:40:52.000000000 +0200 +@@ -0,0 +1,37 @@ ++#include <asm/hardware/locomo.h> ++#ifndef __LOCOMO_SPI_H__ ++#define __LOCOMO_SPI_H__ ++#define IRQ_LOCOMO_CARDDETECT IRQ_LOCOMO_GPIO13 ++#define HIGH 1 ++#define LOW 0 ++struct locomospi_dev { ++ struct locomo_dev *ldev; ++ struct spi_master *master; ++ struct spi_device *sdev; ++ int card_power; ++ int clock_base; ++ int clock_mult; ++ unsigned long base; ++ u8 spimode; ++ wait_queue_head_t waitqueue; ++ struct workqueue_struct *workqueue; ++ struct list_head message_list; ++ spinlock_t message_lock; ++ irqreturn_t (*mmc_spi_isr)(int, void*); ++}; ++ ++ ++static irqreturn_t locomospi_cardisr(int, void*); ++static int locomospi_probe(struct locomo_dev*); ++static int locomospi_remove(struct locomo_dev*); ++static int locomospi_carddetect(void); ++static void locomospi_reg_open(void); ++static void locomospi_reg_release(void); ++static int tx(const char*, int); ++static int rx(char *, int); ++static void locomospi_togglecs(void); ++static void locomospi_power(int on); ++static int locomospi_suspend(struct locomo_dev *dev, pm_message_t state); ++static int locomospi_resume(struct locomo_dev *dev); ++static void locomospi_setcs(int high); ++#endif +Index: linux-2.6.21/drivers/spi/Makefile +=================================================================== +--- linux-2.6.21.orig/drivers/spi/Makefile 2007-04-26 05:08:32.000000000 +0200 ++++ linux-2.6.21/drivers/spi/Makefile 2007-07-03 21:41:16.000000000 +0200 +@@ -20,6 +20,7 @@ + obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o + obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o + obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o ++obj-$(CONFIG_SPI_LOCOMO) += locomo_spi.o + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) diff --git a/packages/linux/linux-rp-2.6.21/sharpsl_pm-r1.patch b/packages/linux/linux-rp-2.6.21/sharpsl_pm-r1.patch new file mode 100644 index 0000000000..9e7632fe0a --- /dev/null +++ b/packages/linux/linux-rp-2.6.21/sharpsl_pm-r1.patch @@ -0,0 +1,213 @@ +Index: linux-2.6.21/arch/arm/common/sharpsl_pm.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/common/sharpsl_pm.c 2007-07-03 21:42:09.000000000 +0200 ++++ linux-2.6.21/arch/arm/common/sharpsl_pm.c 2007-07-03 21:42:57.000000000 +0200 +@@ -28,10 +28,8 @@ + #include <asm/hardware.h> + #include <asm/mach-types.h> + #include <asm/irq.h> +-#include <asm/arch/pm.h> +-#include <asm/arch/pxa-regs.h> +-#include <asm/arch/sharpsl.h> + #include <asm/hardware/sharpsl_pm.h> ++#include "sharpsl_pm.h" + + /* + * Constants +@@ -153,7 +151,7 @@ + sharpsl_pm.battstat.mainbat_percent = percent; + } + +- dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, ++ dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage, + sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); + + /* If battery is low. limit backlight intensity to save power. */ +@@ -504,7 +502,7 @@ + + static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) + { +- dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); ++ dev_dbg(sharpsl_pm.dev, "Time is: %08lx\n",RCNR); + + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + /* not charging and AC-IN! */ +@@ -518,28 +516,28 @@ + + sharpsl_pm.machinfo->presuspend(); + +- PEDR = 0xffffffff; /* clear it */ ++ clear_pedr_on_pxa(); + + sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; + if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { +- RTSR &= RTSR_ALE; ++ enable_alarm_irq(); + RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; +- dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); ++ dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08lx\n",RTAR); + sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; + } else if (alarm_enable) { +- RTSR &= RTSR_ALE; ++ enable_alarm_irq(); + RTAR = alarm_time; +- dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); ++ dev_dbg(sharpsl_pm.dev, "User alarm at: %08lx\n",RTAR); + } else { + dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); + RTAR = 0; + } + +- pxa_pm_enter(state); ++ sharpsl_pm_enter(state); + + sharpsl_pm.machinfo->postsuspend(); + +- dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); ++ dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",pedr_on_pxa()); + } + + static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +@@ -572,7 +570,7 @@ + static int corgi_pxa_pm_enter(suspend_state_t state) + { + unsigned long alarm_time = RTAR; +- unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); ++ unsigned int alarm_status = get_alarm_status(); + + dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); + +@@ -633,7 +631,7 @@ + } + + temp = get_select_val(buff); +- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); ++ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); + + if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || + (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) +@@ -782,9 +780,9 @@ + + static struct pm_ops sharpsl_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, +- .prepare = pxa_pm_prepare, ++ .prepare = sharpsl_pm_prepare, + .enter = corgi_pxa_pm_enter, +- .finish = pxa_pm_finish, ++ .finish = sharpsl_pm_finish, + }; + + static int __init sharpsl_pm_probe(struct platform_device *pdev) +@@ -813,7 +811,7 @@ + apm_get_power_status = sharpsl_apm_get_power_status; + + pm_set_ops(&sharpsl_pm_ops); +- ++ printk(KERN_DEBUG "sharpsl register pm_ops\n"); + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return 0; +Index: linux-2.6.21/arch/arm/common/sharpsl_pm.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21/arch/arm/common/sharpsl_pm.h 2007-07-03 21:42:26.000000000 +0200 +@@ -0,0 +1,78 @@ ++ ++#ifdef CONFIG_ARCH_PXA ++# include <asm/arch/pm.h> ++# include <asm/arch/pxa-regs.h> ++# include <asm/arch/sharpsl.h> ++static inline void clear_pedr_on_pxa(void) ++{ ++ PEDR = 0xffffffff; /* clear it */ ++} ++ ++static inline void enable_alarm_irq(void) ++{ ++ RTSR &= RTSR_ALE; ++} ++ ++static inline int pedr_on_pxa(void) ++{ ++ return PEDR; ++} ++ ++static inline int get_alarm_status(void) ++{ ++ return ((RTSR & RTSR_ALE) != 0); ++} ++ ++static inline int sharpsl_pm_enter(suspend_state_t state) ++{ ++ return pxa_pm_enter(state); ++} ++static inline int sharpsl_pm_prepare(suspend_state_t state) ++{ ++ return pxa_pm_prepare(state); ++} ++ ++int sharpsl_pm_finish(suspend_state_t state) ++{ ++ return pxa_pm_finish(state); ++} ++#endif ++ ++#ifdef CONFIG_ARCH_SA1100 ++# include <asm/arch/SA-1100.h> ++extern int sa11x0_pm_enter(suspend_state_t state); ++ ++static inline void clear_pedr_on_pxa(void) {} ++static inline void enable_alarm_irq(void) {} ++static inline int pedr_on_pxa(void) ++{ ++ return GPLR; ++} ++ ++static inline int get_alarm_status(void) ++{ ++ return 1; ++} ++ ++static inline int sharpsl_pm_enter(suspend_state_t state) ++{ ++ return sa11x0_pm_enter(state); ++} ++ ++static inline int sharpsl_pm_prepare(suspend_state_t state) ++{ ++ switch (state) { ++ case PM_SUSPEND_MEM: ++ case PM_SUSPEND_STANDBY: ++ return 0; ++ default: ++ return -EINVAL; ++ } ++} ++ ++int sharpsl_pm_finish(suspend_state_t state) ++{ ++ return 0; ++} ++#endif ++ +Index: linux-2.6.21/arch/arm/mach-sa1100/pm.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-sa1100/pm.c 2007-04-26 05:08:32.000000000 +0200 ++++ linux-2.6.21/arch/arm/mach-sa1100/pm.c 2007-07-03 21:42:26.000000000 +0200 +@@ -54,7 +54,7 @@ + }; + + +-static int sa11x0_pm_enter(suspend_state_t state) ++int sa11x0_pm_enter(suspend_state_t state) + { + unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE]; + struct timespec delta, rtc; +@@ -128,6 +128,7 @@ + + return 0; + } ++EXPORT_SYMBOL(sa1x00_pm_enter); + + unsigned long sleep_phys_sp(void *sp) + { diff --git a/packages/linux/linux-rp_2.6.21.bb b/packages/linux/linux-rp_2.6.21.bb index 07c7e386fe..fdac72324f 100644 --- a/packages/linux/linux-rp_2.6.21.bb +++ b/packages/linux/linux-rp_2.6.21.bb @@ -1,6 +1,6 @@ require linux-rp.inc -PR = "r5" +PR = "r7" # Handy URLs # git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046 @@ -73,16 +73,20 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.21.tar.bz2 \ # (Pavel Machek's git tree has updated versions of this?) # ${JLSRC}/zaurus-lcd-2.6.11.diff.gz;patch=1 -# These patches are extracted from Pavel Machek's git tree -# (diff against vanilla kernel) SRC_URI_append_collie = "\ - ${DOSRC}/collie/mtd-sharp-flash-hack-r0.patch;patch=1 \ - ${DOSRC}/collie/collie-r0.patch;patch=1 \ - ${DOSRC}/collie/locomolcd-backlight-r0.patch;patch=1 \ - ${DOSRC}/collie/ucb1x00-touch-audio-r0.patch;patch=1 \ - file://collie-mcp-r1.patch;patch=1 \ - ${DOSRC}/collie/sa1100-udc-r0.patch;patch=1 \ -# ${DOSRC}/collie/collie-pm-r1.patch;patch=1 \ + ${TKSRC}/mtd-sharp-flash-hack-r2.patch;patch=1 \ + ${TKSRC}/ucb1x00-touch-audio-r1.patch;patch=1 \ + ${TKSRC}/mcp-sa11x0-r0.patch;patch=1 \ + ${TKSRC}/sa1100-udc-r2.patch;patch=1 \ + ${TKSRC}/mmc_spi-r4.patch;patch=1 \ + ${TKSRC}/locomo-r0.patch;patch=1 \ + ${TKSRC}/collie-kexec.patch;patch=1 \ + ${TKSRC}/locomo_spi-r4.patch;patch=1 \ + ${TKSRC}/sharpsl_pm-r2.patch;patch=1 \ + ${TKSRC}/collie_pm-r2.patch;patch=1 \ + ${TKSRC}/locomokeyb_suspendkey.patch;patch=1 \ + ${TKSRC}/pcmcia_suspend.patch;patch=1 \ + ${TKSRC}/ucb1x00_suspend.patch;patch=1 \ " SRC_URI_append_tosa = "\ diff --git a/packages/linux/linux-x86-2.6.20/i486-defconfig b/packages/linux/linux-x86-2.6.20/i486-defconfig index ed299d667d..d0c170f9eb 100644 --- a/packages/linux/linux-x86-2.6.20/i486-defconfig +++ b/packages/linux/linux-x86-2.6.20/i486-defconfig @@ -1,30 +1,21 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.20 -# Tue Feb 20 09:02:49 2007 +# Wed Jul 4 16:53:32 2007 # -CONFIG_X86_64=y -CONFIG_64BIT=y -CONFIG_X86=y -CONFIG_ZONE_DMA32=y +CONFIG_X86_32=y +CONFIG_GENERIC_TIME=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_X86=y CONFIG_MMU=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_CMPXCHG=y -CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_DMI=y -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -56,6 +47,7 @@ CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -89,7 +81,9 @@ CONFIG_STOP_MACHINE=y # Block layer # CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -107,72 +101,124 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # +CONFIG_SMP=y CONFIG_X86_PC=y -# CONFIG_X86_VSMP is not set -# CONFIG_MK8 is not set -# CONFIG_MPSC is not set +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_PARAVIRT is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +CONFIG_M686=y +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set # CONFIG_MCORE2 is not set -CONFIG_GENERIC_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 -CONFIG_X86_TSC=y +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CMPXCHG=y +CONFIG_X86_XADD=y +CONFIG_X86_L1_CACHE_SHIFT=5 +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_X86_PPRO_FENCE=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_CMPXCHG64=y CONFIG_X86_GOOD_APIC=y -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_X86_HT=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_MTRR=y -CONFIG_SMP=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_TSC=y +CONFIG_HPET_TIMER=y +CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y -# CONFIG_NUMA is not set -CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_MCE=y +# CONFIG_X86_MCE_NONFATAL is not set +# CONFIG_X86_MCE_P4THERMAL is not set +CONFIG_VM86=y +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +# CONFIG_NOHIGHMEM is not set +CONFIG_HIGHMEM4G=y +# CONFIG_HIGHMEM64G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_NR_CPUS=8 -# CONFIG_HOTPLUG_CPU is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_HPET_TIMER=y -CONFIG_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set -CONFIG_SWIOTLB=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 +# CONFIG_HIGHPTE is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_MTRR=y +# CONFIG_EFI is not set +CONFIG_IRQBALANCE=y CONFIG_SECCOMP=y -# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_REORDER is not set -CONFIG_K8_NB=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ISA_DMA_API=y -CONFIG_GENERIC_PENDING_IRQ=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_COMPAT_VDSO=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # -# Power management options +# Power management options (ACPI, APM) # CONFIG_PM=y CONFIG_PM_LEGACY=y @@ -205,19 +251,34 @@ CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # +# APM (Advanced Power Management) BIOS Support +# +# CONFIG_APM is not set + +# # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # -# Bus options (PCI etc.) +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_MSI is not set CONFIG_HT_IRQ=y +CONFIG_ISA_DMA_API=y +# CONFIG_ISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set +CONFIG_K8_NB=y # # PCCARD (PCMCIA/CardBus) support @@ -230,11 +291,11 @@ CONFIG_HT_IRQ=y # CONFIG_HOTPLUG_PCI is not set # -# Executable file formats / Emulations +# Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_IA32_EMULATION is not set # # Networking @@ -339,6 +400,7 @@ CONFIG_IP_NF_QUEUE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -457,6 +519,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set @@ -526,6 +589,8 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -549,6 +614,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set @@ -642,17 +708,18 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set +CONFIG_PCNET32=y +# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set +CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set +CONFIG_NE2K_PCI=m # CONFIG_8139CP is not set CONFIG_8139TOO=y CONFIG_8139TOO_PIO=y @@ -662,6 +729,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set @@ -703,6 +771,29 @@ CONFIG_S2IO=m # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y # # Wan interfaces @@ -827,11 +918,18 @@ CONFIG_RTC=m # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set CONFIG_AGP=y +# CONFIG_AGP_ALI is not set +# CONFIG_AGP_ATI is not set +# CONFIG_AGP_AMD is not set CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y +# CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set +# CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set +# CONFIG_AGP_EFFICEON is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set @@ -845,6 +943,8 @@ CONFIG_DRM=y # CONFIG_DRM_SAVAGE is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set +# CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set @@ -919,6 +1019,7 @@ CONFIG_FB_VESA=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set @@ -930,6 +1031,7 @@ CONFIG_FB_VESA=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set @@ -977,6 +1079,7 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_RAWMIDI=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y @@ -1020,6 +1123,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1035,7 +1139,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set +CONFIG_SND_ENS1371=y # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set @@ -1285,13 +1389,6 @@ CONFIG_RTC_DRV_V3020=m # CONFIG_KVM is not set # -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set - -# # File systems # CONFIG_EXT2_FS=y @@ -1469,6 +1566,10 @@ CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_EARLY_PRINTK=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y +CONFIG_DOUBLEFAULT=y # # Security options @@ -1502,10 +1603,10 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m -# CONFIG_CRYPTO_TWOFISH_X86_64 is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m -# CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_AES_586 is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m @@ -1520,6 +1621,10 @@ CONFIG_CRYPTO_CRC32C=m # # Hardware crypto devices # +CONFIG_CRYPTO_DEV_PADLOCK=m +CONFIG_CRYPTO_DEV_PADLOCK_AES=m +CONFIG_CRYPTO_DEV_PADLOCK_SHA=m +CONFIG_CRYPTO_DEV_GEODE=m # # Library routines @@ -1529,7 +1634,16 @@ CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_IOMAP_COPY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +CONFIG_KTIME_SCALAR=y diff --git a/packages/linux/linux-x86_2.6.20.bb b/packages/linux/linux-x86_2.6.20.bb index ec79c94bc4..969fd55f0e 100644 --- a/packages/linux/linux-x86_2.6.20.bb +++ b/packages/linux/linux-x86_2.6.20.bb @@ -1,7 +1,7 @@ DESCRIPTION = "Linux Kernel for x86 compatible machines" SECTION = "kernel" LICENSE = "GPL" -PR = "r1" +PR = "r3" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 " @@ -29,3 +29,12 @@ do_configure_prepend_i686() { install -m 0644 ${WORKDIR}/i686-defconfig ${S}/.config } + +do_deploy() { + install -d ${DEPLOY_DIR_IMAGE} + install -m 0644 arch/i386/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME} +} + +do_deploy[dirs] = "${S}" + +addtask deploy before do_populate_staging after do_compile diff --git a/packages/linux/linux.inc b/packages/linux/linux.inc index 3ee5e227f3..1e4e58b089 100644 --- a/packages/linux/linux.inc +++ b/packages/linux/linux.inc @@ -7,6 +7,7 @@ DEPENDS_kb9202 = "u-boot-mkimage-gta01-native" DEPENDS_at32stk1000 = "u-boot-mkimage-gta01-native" DEPENDS_atngw100 = "u-boot-mkimage-gta01-native" DEPENDS_at91sam9263ek = "u-boot-mkimage-gta01-native" +DEPENDS_sarge-at91 = "u-boot-mkimage-gta01-native" inherit kernel @@ -16,6 +17,7 @@ KERNEL_IMAGETYPE_kb9202 = "uImage" KERNEL_IMAGETYPE_atngw100 = "uImage" KERNEL_IMAGETYPE_at32stk1000 = "uImage" KERNEL_IMAGETYPE_at91sam9263ek = "uImage" +KERNEL_IMAGETYPE_sarge-at91 = "uImage" # Specify the commandline for you device here: diff --git a/packages/linux/linux/sarge-at91/.mtn2git_empty b/packages/linux/linux/sarge-at91/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux/sarge-at91/.mtn2git_empty diff --git a/packages/linux/linux/sarge-at91/2.6.21-sarge-kernel.patch b/packages/linux/linux/sarge-at91/2.6.21-sarge-kernel.patch new file mode 100644 index 0000000000..7b5f408c37 --- /dev/null +++ b/packages/linux/linux/sarge-at91/2.6.21-sarge-kernel.patch @@ -0,0 +1,238 @@ +diff -Nurp ../linux-2.6.21.4/arch/arm/boot/compressed/head-at91rm9200.S ./arch/arm/boot/compressed/head-at91rm9200.S +--- ../linux-2.6.21.4/arch/arm/boot/compressed/head-at91rm9200.S 2007-06-12 22:29:12.000000000 +0200 ++++ ./arch/arm/boot/compressed/head-at91rm9200.S 2007-06-12 02:57:07.000000000 +0200 +@@ -73,6 +73,12 @@ + cmp r7, r3 + beq 99f + ++ @ AT91RM9200 ++ mov r3, #(MACH_TYPE_AT91RM9200 & 0xff) ++ orr r3, r3, #(MACH_TYPE_AT91RM9200 & 0xff00) ++ cmp r7, r3 ++ beq 99f ++ + @ Unknown board, use the AT91RM9200DK board + @ mov r7, #MACH_TYPE_AT91RM9200 + mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) +diff -Nurp ../linux-2.6.21.4/arch/arm/mach-at91/board-sarge.c ./arch/arm/mach-at91/board-sarge.c +--- ../linux-2.6.21.4/arch/arm/mach-at91/board-sarge.c 1970-01-01 01:00:00.000000000 +0100 ++++ ./arch/arm/mach-at91/board-sarge.c 2007-06-12 02:57:07.000000000 +0200 +@@ -0,0 +1,190 @@ ++/* ++ * linux/arch/arm/mach-at91/board-sarge.c ++ * ++ * Copyright (C) 2007 BlackMesaEast staff ++ * ++ * mcgregor@blackmesaeast.com.pl ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/mtd/physmap.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91rm9200_mc.h> ++ ++#include "generic.h" ++ ++ ++/* ++ * Serial port configuration. ++ * 0 .. 3 = USART0 .. USART3 ++ * 4 = DBGU ++ */ ++static struct at91_uart_config __initdata sarge_uart_config = { ++ .console_tty = 0, /* ttyS0 */ ++ .nr_tty = 5, ++ .tty_map = { 4, 1, 0, 2, 3 } /* ttyS0, ..., ttyS4 */ ++}; ++ ++static void __init sarge_map_io(void) ++{ ++ /* Initialize processor: 18.432 MHz crystal */ ++ at91rm9200_initialize(18432000, AT91RM9200_PQFP); ++ ++ /* Setup the serial ports and console */ ++ at91_init_serial(&sarge_uart_config); ++} ++ ++static void __init sarge_init_irq(void) ++{ ++ at91rm9200_init_interrupts(NULL); ++} ++ ++static struct at91_eth_data __initdata sarge_eth_data = { ++ .phy_irq_pin = AT91_PIN_PB1, ++ .is_rmii = 0, ++}; ++ ++static struct at91_usbh_data __initdata sarge_usbh_data = { ++ .ports = 1, ++}; ++ ++static struct at91_udc_data __initdata sarge_udc_data = { ++ .vbus_pin = AT91_PIN_PA20, ++ .pullup_pin = AT91_PIN_PA21, ++}; ++ ++static struct at91_cf_data __initdata sarge_cf_data = { ++ .det_pin = AT91_PIN_PB24, ++ .rst_pin = AT91_PIN_PB23, ++ // .irq_pin = ... not connected ++ // .vcc_pin = ... always powered ++}; ++ ++static struct at91_mmc_data __initdata sarge_mmc_data = { ++ .det_pin = AT91_PIN_PB0, ++ .slot_b = 0, ++ .wire4 = 1, ++ .wp_pin = AT91_PIN_PB2, ++}; ++ ++ ++ ++static struct spi_board_info sarge_spi_devices[] = { ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ } ++}; ++ ++static struct mtd_partition __initdata sarge_nand_partition[] = { ++ { ++ .name = "NAND Partition 1", ++ .offset = 0, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct mtd_partition *nand_partitions(int size, int *num_partitions) ++{ ++ *num_partitions = ARRAY_SIZE(sarge_nand_partition); ++ return sarge_nand_partition; ++} ++ ++static struct at91_nand_data __initdata sarge_nand_data = { ++ .ale = 22, ++ .cle = 21, ++ .det_pin = AT91_PIN_PB22, ++ .rdy_pin = AT91_PIN_PB22, ++ // .enable_pin = ... not there ++ .partition_info = nand_partitions, ++}; ++ ++#define SARGE_FLASH_BASE AT91_CHIPSELECT_0 ++#define SARGE_FLASH_SIZE 0x200000 ++ ++static struct physmap_flash_data sarge_flash_data = { ++ .width = 2, ++}; ++ ++static struct resource sarge_flash_resource = { ++ .start = SARGE_FLASH_BASE, ++ .end = SARGE_FLASH_BASE + SARGE_FLASH_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device sarge_flash = { ++ .name = "physmap-flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &sarge_flash_data, ++ }, ++ .resource = &sarge_flash_resource, ++ .num_resources = 1, ++}; ++ ++static void __init sarge_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* Ethernet */ ++ at91_add_device_eth(&sarge_eth_data); ++ /* USB Host */ ++ at91_add_device_usbh(&sarge_usbh_data); ++ /* USB Device */ ++ at91_add_device_udc(&sarge_udc_data); ++ at91_set_multi_drive(sarge_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ ++ /* Compact Flash */ ++ at91_add_device_cf(&sarge_cf_data); ++ /* I2C */ ++ at91_add_device_i2c(); ++ /* SPI */ ++ at91_add_device_spi(sarge_spi_devices, ARRAY_SIZE(sarge_spi_devices)); ++ ++ /* MMC */ ++ at91_add_device_mmc(0, &sarge_mmc_data); ++ /* NAND */ ++ at91_add_device_nand(&sarge_nand_data); ++ /* NOR Flash */ ++ platform_device_register(&sarge_flash); ++} ++MACHINE_START(AT91RM9200, "Sarge AT91RM9200 SBC") ++ /* Maintainer: mcgregor@blackmesaeast.com.pl */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91rm9200_timer, ++ .map_io = sarge_map_io, ++ .init_irq = sarge_init_irq, ++ .init_machine = sarge_board_init, ++MACHINE_END +diff -Nurp ../linux-2.6.21.4/arch/arm/mach-at91/Kconfig ./arch/arm/mach-at91/Kconfig +--- ../linux-2.6.21.4/arch/arm/mach-at91/Kconfig 2007-06-12 22:29:12.000000000 +0200 ++++ ./arch/arm/mach-at91/Kconfig 2007-06-12 03:00:28.000000000 +0200 +@@ -90,6 +90,13 @@ config MACH_KAFA + help + Select this if you are using Sperry-Sun's KAFA board. + ++config MACH_SARGE ++ bool "Black Mesa East Sarge SBC" ++ depends on ARCH_AT91RM9200 ++ help ++ Select this if you are using BlackMesaEast Sarge PCB ++ <http://blackmesaeast.com.pl> ++ + config MACH_CHUB + bool "Promwad Chub board" + depends on ARCH_AT91RM9200 +diff -Nurp ../linux-2.6.21.4/arch/arm/mach-at91/Makefile ./arch/arm/mach-at91/Makefile +--- ../linux-2.6.21.4/arch/arm/mach-at91/Makefile 2007-06-12 22:29:12.000000000 +0200 ++++ ./arch/arm/mach-at91/Makefile 2007-06-12 03:00:47.000000000 +0200 +@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_KB9200) += board-kb920 + obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o + obj-$(CONFIG_MACH_KAFA) += board-kafa.o + obj-$(CONFIG_MACH_CHUB) += board-chub.o ++obj-$(CONFIG_MACH_SARGE) += board-sarge.o + + # AT91SAM9260 board-specific support + obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o diff --git a/packages/linux/linux/sarge-at91/2.6.21-sarge-mmc.patch b/packages/linux/linux/sarge-at91/2.6.21-sarge-mmc.patch new file mode 100644 index 0000000000..01bbaeb73e --- /dev/null +++ b/packages/linux/linux/sarge-at91/2.6.21-sarge-mmc.patch @@ -0,0 +1,87 @@ +diff -Nurp ../linux-2.6.21.4/drivers/mmc/at91_mci.c ./drivers/mmc/at91_mci.c +--- ../linux-2.6.21.4/drivers/mmc/at91_mci.c 2007-06-12 22:29:12.000000000 +0200 ++++ ./drivers/mmc/at91_mci.c 2007-06-12 03:52:55.000000000 +0200 +@@ -421,8 +421,11 @@ static unsigned int at91_mci_send_comman + if (cmd->opcode == MMC_STOP_TRANSMISSION) + cmdr |= AT91_MCI_TRCMD_STOP; + +- if (host->bus_mode == MMC_BUSMODE_OPENDRAIN) +- cmdr |= AT91_MCI_OPDCMD; ++ //if (host->bus_mode == MMC_BUSMODE_OPENDRAIN) ++ // cmdr |= AT91_MCI_OPDCMD; ++ ++ if (!(1/**machine_is_sarge*/) && host->bus_mode == MMC_BUSMODE_OPENDRAIN) ++ cmdr |= AT91_MCI_OPDCMD; + + /* + * Set the arguments and send the command +@@ -739,7 +742,13 @@ static irqreturn_t at91_mci_irq(int irq, + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); + at91mci_completed_command(host); + } else ++// at91_mci_write(host, AT91_MCI_IDR, int_status); ++ { ++ if (1 /*machine_is_sarge()*/) ++ at91_mci_write(host, AT91_MCI_IDR, (int_status & ~AT91_MCI_TXRDY) ); ++ else + at91_mci_write(host, AT91_MCI_IDR, int_status); ++ } + + return IRQ_HANDLED; + } +diff -Nurp ../linux-2.6.21.4/drivers/mmc/mmc_block.c ./drivers/mmc/mmc_block.c +--- ../linux-2.6.21.4/drivers/mmc/mmc_block.c 2007-06-07 23:27:31.000000000 +0200 ++++ ./drivers/mmc/mmc_block.c 2007-06-12 04:19:36.000000000 +0200 +@@ -256,10 +256,24 @@ static int mmc_blk_issue_rq(struct mmc_q + * this rule as they support querying the number of + * successfully written sectors. + */ +- if (rq_data_dir(req) != READ && ++// if (rq_data_dir(req) != READ && ++ if ((1/**machine_is_sarge*/)) ++ { ++ if (rq_data_dir(req) != READ) ++ brq.data.blocks = 1; ++ } ++ else if (rq_data_dir(req) != READ && ++ + !(card->host->caps & MMC_CAP_MULTIWRITE) && + !mmc_card_sd(card)) + brq.data.blocks = 1; ++ ++ ++ ++ ++ ++ ++ + + if (brq.data.blocks > 1) { + brq.data.flags |= MMC_DATA_MULTI; +diff -Nurp ../linux-2.6.21.4/drivers/mmc/mmc.c ./drivers/mmc/mmc.c +--- ../linux-2.6.21.4/drivers/mmc/mmc.c 2007-06-07 23:27:31.000000000 +0200 ++++ ./drivers/mmc/mmc.c 2007-06-12 04:10:05.000000000 +0200 +@@ -1500,12 +1500,22 @@ static void mmc_setup(struct mmc_host *h + mmc_set_ios(host); + + mmc_read_csds(host); +- ++ /* + if (host->mode == MMC_MODE_SD) { + mmc_read_scrs(host); + mmc_read_switch_caps(host); + } else + mmc_process_ext_csds(host); ++ */ ++ ++ if (!(1/*machine_is_sarge*/)) ++ { ++ if (host->mode == MMC_MODE_SD) { ++ mmc_read_scrs(host); ++ mmc_read_switch_caps(host); ++ } else ++ mmc_process_ext_csds(host); ++ } + } + + diff --git a/packages/linux/linux/sarge-at91/2.6.21-sarge-phy.patch b/packages/linux/linux/sarge-at91/2.6.21-sarge-phy.patch new file mode 100644 index 0000000000..25ce15eb94 --- /dev/null +++ b/packages/linux/linux/sarge-at91/2.6.21-sarge-phy.patch @@ -0,0 +1,400 @@ +diff -Nurp ../linux-2.6.21.4/drivers/net/arm/at91_ether.c ./drivers/net/arm/at91_ether.c +--- ../linux-2.6.21.4/drivers/net/arm/at91_ether.c 2007-06-12 22:29:12.000000000 +0200 ++++ ./drivers/net/arm/at91_ether.c 2007-06-12 03:11:16.000000000 +0200 +@@ -235,6 +235,11 @@ static irqreturn_t at91ether_phy_interru + if (!(phy & (1 << 7))) + goto done; + } ++ else if (lp->phy_type == MII_STE100P_ID) { ++ read_phy(lp->phy_address, MII_STE100P_XCSIIS_REG, &phy); /* ack interrupt in STE100P PHY */ ++ if (!(phy & 0x007F)) ++ goto done; ++ } + + update_linkspeed(dev, 0); + +@@ -303,6 +308,11 @@ static void enable_phyirq(struct net_dev + dsintr = dsintr | 0x3; /* set bits 0,1 */ + write_phy(lp->phy_address, MII_DPMICR_REG, dsintr); + } ++ else if (lp->phy_type == MII_STE100P_ID) { /* for STE100P PHY */ ++ read_phy(lp->phy_address, MII_STE100P_XIE_REG, &dsintr); ++ ++ dsintr |= 0x007F; ++ } + + disable_mdi(); + spin_unlock_irq(&lp->lock); +@@ -359,6 +369,11 @@ static void disable_phyirq(struct net_de + dsintr = dsintr & ~0x3c; /* clear bits 2..5 */ + write_phy(lp->phy_address, MII_DPMISR_REG, dsintr); + } ++ else if (lp->phy_type == MII_STE100P_ID) { /* for STE100P PHY */ ++ read_phy(lp->phy_address, MII_STE100P_XIE_REG, &dsintr); ++ dsintr &= 0xFF80; ++ write_phy(lp->phy_address, MII_STE100P_XIE_REG, dsintr); ++ } + + disable_mdi(); + spin_unlock_irq(&lp->lock); +@@ -1117,6 +1132,8 @@ static int __init at91ether_setup(unsign + printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name); + else if (phy_type == MII_LAN83C185_ID) + printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name); ++ else if (phy_type == MII_STE100P_ID) ++ printk(KERN_INFO "%s: STE100P PHY\n", dev->name); + + return 0; + } +@@ -1159,6 +1176,7 @@ static int __init at91ether_probe(struct + case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ + case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */ + case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */ ++ case MII_STE100P_ID: /* STE100P: PHY_ID1 = 0x1C04, PHY_ID2 = 0x0000 */ + detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk); + break; + } +diff -Nurp ../linux-2.6.21.4/drivers/net/arm/at91_ether.h ./drivers/net/arm/at91_ether.h +--- ../linux-2.6.21.4/drivers/net/arm/at91_ether.h 2007-06-12 22:29:12.000000000 +0200 ++++ ./drivers/net/arm/at91_ether.h 2007-06-12 03:07:54.000000000 +0200 +@@ -29,6 +29,15 @@ + #define MII_ISINTS_REG 19 + #define MII_LEDCTRL_REG 20 + ++/* STE100P specific registers */ ++#define MII_STE100P_XCSIIS_REG 0x11 ++#define MII_STE100P_XIE_REG 0x12 ++#define MII_XCR_REG 0x00 ++#define MII_XCR_ISOLATE 0x0400 ++ ++/* STE100P PHY */ ++#define MII_STE100P_ID 0x1c040010 ++ + /* Realtek RTL8201 PHY */ + #define MII_RTL8201_ID 0x00008200 + +diff -Nurp ../linux-2.6.21.4/drivers/net/phy/Kconfig ./drivers/net/phy/Kconfig +--- ../linux-2.6.21.4/drivers/net/phy/Kconfig 2007-06-07 23:27:31.000000000 +0200 ++++ ./drivers/net/phy/Kconfig 2007-06-12 03:12:16.000000000 +0200 +@@ -62,6 +62,12 @@ config BROADCOM_PHY + ---help--- + Currently supports the BCM5411, BCM5421 and BCM5461 PHYs. + ++config STE100P_PHY ++ tristate "Drivers for the STE100P PHY" ++ depends on PHYLIB ++ ---help--- ++ Currently supports the ste100p ++ + config FIXED_PHY + tristate "Drivers for PHY emulation on fixed speed/link" + depends on PHYLIB +diff -Nurp ../linux-2.6.21.4/drivers/net/phy/Makefile ./drivers/net/phy/Makefile +--- ../linux-2.6.21.4/drivers/net/phy/Makefile 2007-06-07 23:27:31.000000000 +0200 ++++ ./drivers/net/phy/Makefile 2007-06-12 03:12:29.000000000 +0200 +@@ -12,3 +12,4 @@ obj-$(CONFIG_SMSC_PHY) += smsc.o + obj-$(CONFIG_VITESSE_PHY) += vitesse.o + obj-$(CONFIG_BROADCOM_PHY) += broadcom.o + obj-$(CONFIG_FIXED_PHY) += fixed.o ++obj-$(CONFIG_STE100P_PHY) += ste100p.o +diff -Nurp ../linux-2.6.21.4/drivers/net/phy/ste100p.c ./drivers/net/phy/ste100p.c +--- ../linux-2.6.21.4/drivers/net/phy/ste100p.c 1970-01-01 01:00:00.000000000 +0100 ++++ ./drivers/net/phy/ste100p.c 2007-06-12 02:52:31.000000000 +0200 +@@ -0,0 +1,297 @@ ++/* ++ * drivers/net/phy/ste100p.c ++ * ++ * Driver for STE100P PHYs ++ * ++ * Author: Grzegorz Rajtar mcgregor@blackmesaeast.com.pl ++ * ++ * Copyright (c) 2007 Black Mesa East ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/string.h> ++#include <linux/errno.h> ++#include <linux/unistd.h> ++#include <linux/slab.h> ++#include <linux/interrupt.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/skbuff.h> ++#include <linux/spinlock.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/mii.h> ++#include <linux/ethtool.h> ++#include <linux/phy.h> ++ ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/uaccess.h> ++ ++/* Control register and bitmasks*/ ++#define MII_STE100P_XCR_REG 0x00 ++#define MII_STE100P_XCR_RESET 1 << 15 ++#define MII_STE100P_XCR_LOOPBACK 1 << 14 ++#define MII_STE100P_XCR_SPEED 1 << 13 ++#define MII_STE100P_XCR_AN 1 << 12 ++#define MII_STE100P_XCR_PWRDN 1 << 11 ++#define MII_STE100P_XCR_ISOLATE 1 << 10 ++#define MII_STE100P_XCR_RSTRT_AN 1 << 9 ++#define MII_STE100P_XCR_FULL_DUP 1 << 8 ++#define MII_STE100P_XCR_COLLEN 1 << 7 ++ ++ ++/* Iinterrupt register and bitmasks */ ++#define MII_STE100P_XIE_REG 0x12 ++#define MII_STE100P_XIE_ANCE 1 << 6 ++#define MII_STE100P_XIE_RFE 1 << 5 ++#define MII_STE100P_XIE_LDE 1 << 4 ++#define MII_STE100P_XIE_ANAE 1 << 3 ++#define MII_STE100P_XIE_PDFE 1 << 2 ++#define MII_STE100P_XIE_ANPE 1 << 1 ++#define MII_STE100P_XIE_REFE 1 ++#define MII_STE100P_XIE_ALL \ ++(MII_STE100P_XIE_ANCE | MII_STE100P_XIE_RFE | MII_STE100P_XIE_LDE | \ ++ MII_STE100P_XIE_ANAE | MII_STE100P_XIE_PDFE | MII_STE100P_XIE_ANPE | MII_STE100P_XIE_REFE) ++ ++/* Iinterrupt status register and bitmasks */ ++#define MII_STE100P_XCSIIS_REG 0x11 ++#define MII_STE100P_XCSIIS_SPEED 1 << 9 ++#define MII_STE100P_XCSIIS_DUPLEX 1 << 8 ++#define MII_STE100P_XCSIIS_PAUSE 1 << 7 ++#define MII_STE100P_XCSIIS_ANC 1 << 6 ++#define MII_STE100P_XCSIIS_RFD 1 << 5 ++#define MII_STE100P_XCSIIS_LS 1 << 4 ++#define MII_STE100P_XCSIIS_ANAR 1 << 3 ++#define MII_STE100P_XCSIIS_PDF 1 << 2 ++#define MII_STE100P_XCSIIS_ANPR 1 << 1 ++#define MII_STE100P_XCSIIS_REF 1 ++ ++/* 100-TX register and bitmasks*/ ++#define MII_STE100P_100CTR_REG 0x13 ++#define MII_STE100P_100CTR_DISERR 1 << 13 ++#define MII_STE100P_100CTR_ANC 1 << 12 ++#define MII_STE100P_100CTR_ENRLB 1 << 9 ++#define MII_STE100P_100CTR_ENDCR 1 << 8 ++#define MII_STE100P_100CTR_ENRZI 1 << 7 ++#define MII_STE100P_100CTR_EN4B5B 1 << 6 ++#define MII_STE100P_100CTR_ISOTX 1 << 5 ++#define MII_STE100P_100CTR_CMODE_MASK 0x001C ++#define MII_STE100P_100CTR_DISMLT 1 << 1 ++#define MII_STE100P_100CTR_DISCRM 1 ++ ++/* Auto-negotiation register and bitmasks*/ ++#define MII_STE100P_ANA_REG 0x04 ++#define MII_STE100P_ANA_NXTPG 1 << 15 ++#define MII_STE100P_ANA_RF 1 << 13 ++#define MII_STE100P_ANA_FC 1 << 10 ++#define MII_STE100P_ANA_T4 1 << 9 ++#define MII_STE100P_ANA_TXF 1 << 8 ++#define MII_STE100P_ANA_TXH 1 << 7 ++#define MII_STE100P_ANA_10F 1 << 6 ++#define MII_STE100P_ANA_10H 1 << 5 ++#define MII_STE100P_ANA_SF 0x0000 ++#define MII_STE100P_ANA_SF_MASK 0x000F ++ ++/* PHY chip ID regs */ ++#define MII_STE100P_PID1_REG 0x02 ++#define MII_STE100P_PID2_REG 0x03 ++ ++#define MII_STE100P_PHYID_VAL 0x1C040000 ++#define MII_STE100P_PHYID_MASK 0xFFFF0000 ++ ++ ++ ++MODULE_DESCRIPTION("STE100P PHY driver"); ++MODULE_AUTHOR("Grzegorz Rajtar <mcgregor@blackmesaeast.com.pl>"); ++MODULE_LICENSE("GPL"); ++ ++static int ste100p_config_intr(struct phy_device *phydev) ++{ ++ int temp; ++ temp = phy_read(phydev, MII_STE100P_XIE_REG); ++ ++ if(PHY_INTERRUPT_ENABLED == phydev->interrupts ) ++ temp |= MII_STE100P_XIE_ALL; ++ else ++ { ++ temp &= ~(MII_STE100P_XIE_ALL); ++ //clear interrupt status register ++ phy_read(phydev, MII_STE100P_XCSIIS_REG); ++ } ++ ++ temp = phy_write(phydev, MII_STE100P_XIE_REG, temp); ++ ++ return temp; ++} ++ ++static int ste100p_config_aneg(struct phy_device *phydev) ++{ ++ int err; ++ ++ int temp = phy_read(phydev, MII_STE100P_XCR_REG); ++ int temp2; ++ ++ /* Isolate the PHY */ ++ ++ err = phy_write(phydev, MII_STE100P_XCR_REG, temp | MII_STE100P_XCR_ISOLATE); ++ ++ //read for isolate latch ++ temp = phy_read(phydev, MII_STE100P_XCR_REG); ++ ++ if (err < 0) ++ return err; ++ ++ /* Set the Auto_negotiation Advertisement Register */ ++ /* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */ ++ err = phy_write(phydev, MII_STE100P_ANA_REG, ++ MII_STE100P_ANA_NXTPG | MII_STE100P_ANA_TXF | MII_STE100P_ANA_TXH | ++ MII_STE100P_ANA_10F | MII_STE100P_ANA_10H | MII_STE100P_ANA_SF); ++ ++ if (err < 0) ++ return err; ++ ++ err = phy_write(phydev, MII_STE100P_XCR_REG, ++ temp | MII_STE100P_XCR_AN /*| MII_STE100P_XCR_SPEED */ | MII_STE100P_XCR_FULL_DUP); ++ ++ if (err < 0) ++ return err; ++ ++ /* Restart auto negotiation */ ++ ++ err = phy_write(phydev, MII_STE100P_XCR_REG, ++ (temp | MII_STE100P_XCR_AN | MII_STE100P_XCR_RSTRT_AN) & (~MII_STE100P_XCR_ISOLATE)); ++ ++ //read for isolate latch ++ phy_read(phydev, MII_STE100P_XCR_REG); ++ ++ if (err < 0) ++ return err; ++ ++ /* Configure the new settings */ ++ err = genphy_config_aneg(phydev); ++ ++ if (err < 0) ++ return err; ++ ++ return 0; ++} ++ ++static int ste100p_config_init(struct phy_device *phydev) ++{ ++ int err; ++ int temp; ++ int temp_xcr; ++ ++ /* Isolate the PHY */ ++ ++ temp_xcr = phy_read(phydev, MII_STE100P_XCR_REG); ++ ++ err = phy_write(phydev, MII_STE100P_XCR_REG, ++ ((temp_xcr | MII_STE100P_XCR_ISOLATE) & (~MII_STE100P_XCR_AN))); ++ ++ //read for isolate latch ++ temp_xcr = phy_read(phydev, MII_STE100P_XCR_REG); ++ ++ err = phy_write(phydev, MII_STE100P_XCR_REG, ++ temp_xcr & (~MII_STE100P_XCR_ISOLATE)); ++ ++ //read for isolate latch ++ phy_read(phydev, MII_STE100P_XCR_REG); ++ ++ if (err < 0) ++ return err; ++ ++ temp = phy_read(phydev, MII_STE100P_ANA_REG); ++ ++ err = phy_write(phydev, MII_STE100P_ANA_REG, temp ++ | MII_STE100P_ANA_FC | MII_STE100P_ANA_TXF ++ | MII_STE100P_ANA_TXH | MII_STE100P_ANA_10F | MII_STE100P_ANA_10H); ++ ++ if (err < 0) ++ return err; ++ ++ /* Reconnect the PHY, and enable Autonegotiation */ ++ err = phy_write(phydev, MII_STE100P_XCR_REG, (temp_xcr | MII_STE100P_XCR_AN ++ | MII_STE100P_XCR_RSTRT_AN) & (~MII_STE100P_XCR_ISOLATE)); ++ ++ //read for isolate latch ++ phy_read(phydev, MII_STE100P_XCR_REG); ++ ++ if (err < 0) ++ return err; ++ ++ return 0; ++} ++ ++static int ste100p_ack_interrupt(struct phy_device *phydev) ++{ ++ int intmask = 1; ++ int rep = 0; ++ ++ //clear multiple interrupts; ++ do ++ { ++ intmask = phy_read(phydev, MII_STE100P_XCSIIS_REG); ++ rep++; ++ } while ((intmask & MII_STE100P_XIE_ALL) != 0 && rep < 25); ++ ++ return 0; ++} ++ ++ ++static int ste100p_suspend(struct phy_device *phydev) ++{ ++ int temp = phy_read(phydev, MII_STE100P_XCR_REG); ++ temp = phy_write(phydev, MII_STE100P_XCR_REG, temp | MII_STE100P_XCR_PWRDN); ++ //read for latch XCR REG ++ phy_read(phydev, MII_STE100P_XCR_REG); ++ return temp; ++} ++ ++static int ste100p_resume(struct phy_device *phydev) ++{ ++ int temp; ++ temp = phy_write(phydev, MII_STE100P_XCR_REG, temp & (~MII_STE100P_XCR_PWRDN)); ++ //read for latch XCR REG ++ phy_read(phydev, MII_STE100P_XCR_REG); ++ return temp; ++} ++ ++static struct phy_driver ste100p_driver = { ++ .phy_id = MII_STE100P_PHYID_VAL, ++ .name = "STE100P", ++ .phy_id_mask = MII_STE100P_PHYID_MASK, ++ .features = PHY_BASIC_FEATURES, ++ .flags = PHY_HAS_INTERRUPT, ++ .config_init = &ste100p_config_init, ++ .config_intr = &ste100p_config_intr, ++ .config_aneg = &ste100p_config_aneg, ++ .suspend = &ste100p_suspend, ++ .resume = &ste100p_resume, ++ .ack_interrupt = &ste100p_ack_interrupt, ++ .read_status = &genphy_read_status, ++ .driver = { .owner = THIS_MODULE,}, ++}; ++ ++static int __init ste100p_init(void) ++{ ++ return phy_driver_register(&ste100p_driver); ++} ++ ++static void __exit ste100p_exit(void) ++{ ++ phy_driver_unregister(&ste100p_driver); ++} ++ ++module_init(ste100p_init); ++module_exit(ste100p_exit); diff --git a/packages/linux/linux/sarge-at91/defconfig b/packages/linux/linux/sarge-at91/defconfig new file mode 100644 index 0000000000..36d48a7b49 --- /dev/null +++ b/packages/linux/linux/sarge-at91/defconfig @@ -0,0 +1,1909 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.21.4 +# Wed Jun 13 02:03:51 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set + +# +# AT91RM9200 Board Type +# +# CONFIG_MACH_ONEARM is not set +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_KAFA is not set +CONFIG_MACH_SARGE=y +# CONFIG_MACH_CHUB is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_ATMEL_TCLIB=y +CONFIG_AT91_SLOW_CLOCK=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 root=fe01 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +CONFIG_PM_DEBUG=y +# CONFIG_DISABLE_CONSOLE_SUSPEND is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +CONFIG_ARPD=y +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +# CONFIG_IPV6_ROUTE_INFO is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_DECNET=m +CONFIG_DECNET_ROUTER=y +CONFIG_LLC=m +CONFIG_LLC2=m +CONFIG_IPX=m +CONFIG_IPX_INTERN=y +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +CONFIG_LAPB=m +CONFIG_ECONET=m +CONFIG_ECONET_AUNUDP=y +CONFIG_ECONET_NATIVE=y +CONFIG_WAN_ROUTER=m + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +CONFIG_DONGLE=y +# CONFIG_ESI_DONGLE is not set +# CONFIG_ACTISYS_DONGLE is not set +# CONFIG_TEKRAM_DONGLE is not set +# CONFIG_TOIM3232_DONGLE is not set +# CONFIG_LITELINK_DONGLE is not set +# CONFIG_MA600_DONGLE is not set +# CONFIG_GIRBIL_DONGLE is not set +# CONFIG_MCP2120_DONGLE is not set +# CONFIG_OLD_BELKIN_DONGLE is not set +# CONFIG_ACT200L_DONGLE is not set + +# +# Old SIR device drivers +# +CONFIG_IRPORT_SIR=m + +# +# Old Serial dongle support +# +# CONFIG_DONGLE_OLD is not set + +# +# FIR device drivers +# +CONFIG_USB_IRDA=m +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_CMTP=m +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y +CONFIG_FIB_RULES=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_M25P80=y +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +CONFIG_PARPORT=m +# CONFIG_PARPORT_PC is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_IDEDISK is not set +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECS=m +CONFIG_BLK_DEV_IDECD=m +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=m +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=m +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +CONFIG_STE100P_PHY=m +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +CONFIG_NET_WIRELESS_RTNETLINK=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +CONFIG_STRIP=m +CONFIG_PCMCIA_WAVELAN=m +CONFIG_PCMCIA_NETWAVE=m + +# +# Wireless 802.11 Frequency Hopping cards support +# +CONFIG_PCMCIA_RAYCS=m + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +CONFIG_ATMEL=m + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_AIRO_CS=m +CONFIG_PCMCIA_ATMEL=m +CONFIG_PCMCIA_WL3501=m +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_CS=m +# CONFIG_ZD1211RW is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=m +CONFIG_PCMCIA_3C574=m +CONFIG_PCMCIA_FMVJ18X=m +CONFIG_PCMCIA_PCNET=m +CONFIG_PCMCIA_NMCLAN=m +CONFIG_PCMCIA_SMC91C92=m +CONFIG_PCMCIA_XIRC2PS=m +CONFIG_PCMCIA_AXNET=m + +# +# Wan interfaces +# +CONFIG_WAN=y +# CONFIG_HDLC is not set +# CONFIG_DLCI is not set +# CONFIG_WAN_ROUTER_DRIVERS is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +# CONFIG_SLIP_SMART is not set +# CONFIG_SLIP_MODE_SLIP6 is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +CONFIG_ISDN=m + +# +# Old ISDN4Linux +# +CONFIG_ISDN_I4L=m +# CONFIG_ISDN_PPP is not set +# CONFIG_ISDN_AUDIO is not set + +# +# ISDN feature submodules +# +# CONFIG_ISDN_DRV_LOOP is not set +# CONFIG_ISDN_DIVERSION is not set + +# +# ISDN4Linux hardware drivers +# + +# +# Passive cards +# +# CONFIG_ISDN_DRV_HISAX is not set + +# +# Active cards +# + +# +# Siemens Gigaset +# +# CONFIG_ISDN_DRV_GIGASET is not set + +# +# CAPI subsystem +# +CONFIG_ISDN_CAPI=m +# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set +CONFIG_CAPI_TRACE=y +# CONFIG_ISDN_CAPI_MIDDLEWARE is not set +CONFIG_ISDN_CAPI_CAPI20=m +CONFIG_ISDN_CAPI_CAPIDRV=m + +# +# CAPI hardware drivers +# + +# +# Active AVM cards +# +# CONFIG_CAPI_AVM is not set + +# +# Active Eicon DIVA Server cards +# +# CONFIG_CAPI_EICON is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_PRINTER=m +# CONFIG_LP_CONSOLE is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set + +# +# IPMI +# +CONFIG_IPMI_HANDLER=m +# CONFIG_IPMI_PANIC_EVENT is not set +# CONFIG_IPMI_DEVICE_INTERFACE is not set +# CONFIG_IPMI_SI is not set +# CONFIG_IPMI_WATCHDOG is not set +# CONFIG_IPMI_POWEROFF is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +CONFIG_CARDMAN_4000=m +CONFIG_CARDMAN_4040=m +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_AT91_SPI is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=y +CONFIG_I2C_AT91_CLOCKRATE=100000 +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=m +CONFIG_SENSORS_DS1374=m +CONFIG_SENSORS_EEPROM=m +CONFIG_SENSORS_PCF8574=m +CONFIG_SENSORS_PCA9539=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_MAX6875=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ATMEL is not set +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_BUTTERFLY is not set +CONFIG_SPI_AT91=y +CONFIG_SPI_AT91_MANUAL_CS=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=m + +# +# Dallas's 1-wire bus +# +CONFIG_W1=m + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +CONFIG_W1_MASTER_DS2482=m + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2433=m +# CONFIG_W1_SLAVE_DS2433_CRC is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +CONFIG_SENSORS_DS1621=m +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +# CONFIG_LEDS_CLASS is not set + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y + +# +# Video Capture Adapters +# + +# +# Video Capture Adapters +# +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_BWQCAM is not set +# CONFIG_VIDEO_CQCAM is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set + +# +# V4L USB devices +# +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set + +# +# Radio Adapters +# +# CONFIG_USB_DSBR is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D15605 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_VX_LIB=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_MTS64 is not set +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +# CONFIG_SND_PORTMAN2X4 is not set + +# +# ALSA ARM devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m + +# +# PCMCIA devices +# +CONFIG_SND_VXPOCKET=m +CONFIG_SND_PDAUDIOCF=m + +# +# SoC audio support +# +CONFIG_SND_SOC=m + +# +# SoC Platforms +# + +# +# SoC Audio for the Atmel AT91 +# +CONFIG_SND_AT91_SOC=m + +# +# SoC Audio for the Intel PXA2xx +# + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +CONFIG_OBSOLETE_OSS=y +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_SOUND_TVMIXER=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE_DEBUG=y +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_STORAGE_ALAUDA=y +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=m +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +# CONFIG_USB_FILE_STORAGE is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_AT91=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_AT91RM9200=y +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=y +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_QFMT_V1=y +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +CONFIG_MINIX_SUBPARTITION=y +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_2=m +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_DEBUG_KOBJECT=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/packages/linux/linux_2.6.21.bb b/packages/linux/linux_2.6.21.bb index 41d0a414ea..fda06caaf1 100644 --- a/packages/linux/linux_2.6.21.bb +++ b/packages/linux/linux_2.6.21.bb @@ -2,7 +2,7 @@ require linux.inc DEFAULT_PREFERENCE_at91sam9263ek = "-1" -PR = "r3" +PR = "r4" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ file://defconfig \ @@ -17,4 +17,8 @@ SRC_URI_append_simpad = "\ " SRC_URI_append_kb9202 = " http://maxim.org.za/AT91RM9200/2.6/2.6.21-at91.patch.gz;patch=1 " SRC_URI_append_at91sam9263ek = " http://maxim.org.za/AT91RM9200/2.6/2.6.21-at91.patch.gz;patch=1 " +SRC_URI_append_sarge-at91 = " http://maxim.org.za/AT91RM9200/2.6/2.6.21-at91.patch.gz;patch=1 \ + file://2.6.21-sarge-kernel.patch;patch=1 \ + file://2.6.21-sarge-phy.patch;patch=1 \ + file://2.6.21-sarge-mmc.patch;patch=1" |