diff options
Diffstat (limited to 'packages/linux')
-rw-r--r-- | packages/linux/nas100d-kernel/2.6.14/60-nas100d-i2c.patch | 295 |
1 files changed, 48 insertions, 247 deletions
diff --git a/packages/linux/nas100d-kernel/2.6.14/60-nas100d-i2c.patch b/packages/linux/nas100d-kernel/2.6.14/60-nas100d-i2c.patch index e5b77b48de..b4c5e3c63b 100644 --- a/packages/linux/nas100d-kernel/2.6.14/60-nas100d-i2c.patch +++ b/packages/linux/nas100d-kernel/2.6.14/60-nas100d-i2c.patch @@ -1,284 +1,85 @@ - drivers/i2c/algos/i2c-algo-bit.c | 77 +++++++++++++++++++-------------------- - drivers/i2c/busses/i2c-ixp4xx.c | 46 +++++++++++++++++++++-- - 2 files changed, 82 insertions(+), 41 deletions(-) + drivers/i2c/algos/i2c-algo-bit.c | 9 +++++++-- + drivers/i2c/busses/i2c-ixp4xx.c | 9 ++++++--- + 2 files changed, 13 insertions(+), 5 deletions(-) --- linux-nas100d.orig/drivers/i2c/busses/i2c-ixp4xx.c 2005-11-11 22:22:43.000000000 +0100 -+++ linux-nas100d/drivers/i2c/busses/i2c-ixp4xx.c 2005-11-15 00:41:39.000000000 +0100 -@@ -47,16 +47,26 @@ static inline int ixp4xx_sda_pin(void *d - - static void ixp4xx_bit_setscl(void *data, int val) - { -+#ifndef CONFIG_MACH_NAS100D - gpio_line_set(ixp4xx_scl_pin(data), 0); - gpio_line_config(ixp4xx_scl_pin(data), - val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT ); -+#else -+ gpio_line_config(ixp4xx_scl_pin(data), IXP4XX_GPIO_OUT); -+ gpio_line_set(ixp4xx_scl_pin(data), val ? 1 : 0); -+#endif - } - - static void ixp4xx_bit_setsda(void *data, int val) - { -+#ifndef CONFIG_MACH_NAS100D - gpio_line_set(ixp4xx_sda_pin(data), 0); - gpio_line_config(ixp4xx_sda_pin(data), - val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT ); -+#else -+ gpio_line_config(ixp4xx_sda_pin(data), IXP4XX_GPIO_OUT); -+ gpio_line_set(ixp4xx_sda_pin(data), val ? 1 : 0); -+#endif - } - - static int ixp4xx_bit_getscl(void *data) -@@ -65,7 +75,17 @@ static int ixp4xx_bit_getscl(void *data) ++++ linux-nas100d/drivers/i2c/busses/i2c-ixp4xx.c 2005-11-15 11:51:51.000000000 +0100 +@@ -65,7 +65,6 @@ static int ixp4xx_bit_getscl(void *data) gpio_line_config(ixp4xx_scl_pin(data), IXP4XX_GPIO_IN ); gpio_line_get(ixp4xx_scl_pin(data), &scl); - -+#ifdef CONFIG_MACH_NAS100D -+ { -+ int i; -+ for (i = 0; i <= 0x0f; i++) -+ { -+ gpio_line_get(ixp4xx_scl_pin(data), &scl); -+ if (scl == 0) -+ break; -+ } -+ } -+#endif return scl; } -@@ -76,6 +96,17 @@ static int ixp4xx_bit_getsda(void *data) +@@ -75,7 +74,6 @@ static int ixp4xx_bit_getsda(void *data) + gpio_line_config(ixp4xx_sda_pin(data), IXP4XX_GPIO_IN ); gpio_line_get(ixp4xx_sda_pin(data), &sda); - -+#ifdef CONFIG_MACH_NAS100D -+ { -+ int i; -+ for (i = 0; i <= 0x0f; i++) -+ { -+ gpio_line_get(ixp4xx_sda_pin(data), &sda); -+ if (sda == 0) -+ break; -+ } -+ } -+#endif +- return sda; } -@@ -127,17 +158,26 @@ static int ixp4xx_i2c_probe(struct devic +@@ -127,7 +125,10 @@ static int ixp4xx_i2c_probe(struct devic drv_data->algo_data.udelay = 10; drv_data->algo_data.mdelay = 10; drv_data->algo_data.timeout = 100; - +#ifdef CONFIG_MACH_NAS100D -+ drv_data->algo_data.udelay = 100; -+ drv_data->algo_data.mdelay = 100; ++ drv_data->algo_data.udelay = 200; ++ drv_data->algo_data.mdelay = 200; +#endif drv_data->adapter.id = I2C_HW_B_IXP4XX; drv_data->adapter.algo_data = &drv_data->algo_data; - drv_data->adapter.dev.parent = &plat_dev->dev; - -+#ifdef CONFIG_MACH_NAS100D -+ gpio_line_config(gpio->scl_pin, IXP4XX_GPIO_OUT); -+ gpio_line_config(gpio->sda_pin, IXP4XX_GPIO_OUT); -+ gpio_line_set(gpio->scl_pin, IXP4XX_GPIO_HIGH); -+ gpio_line_set(gpio->sda_pin, IXP4XX_GPIO_HIGH); -+#else - gpio_line_config(gpio->scl_pin, IXP4XX_GPIO_IN); - gpio_line_config(gpio->sda_pin, IXP4XX_GPIO_IN); - gpio_line_set(gpio->scl_pin, 0); - gpio_line_set(gpio->sda_pin, 0); -- -+#endif - if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) { - printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id); - ---- linux-nas100d.orig/drivers/i2c/algos/i2c-algo-bit.c 2005-11-14 14:28:20.000000000 +0100 -+++ linux-nas100d/drivers/i2c/algos/i2c-algo-bit.c 2005-11-15 08:46:27.000000000 +0100 -@@ -78,30 +78,31 @@ static inline void scllo(struct i2c_algo - */ - static inline int sclhi(struct i2c_algo_bit_data *adap) - { -- unsigned long start; -+ int i=0; -+// unsigned long start; - - setscl(adap,1); -+ udelay(adap->udelay); - - /* Not all adapters have scl sense line... */ - if (adap->getscl == NULL ) { -- udelay(adap->udelay); - return 0; +@@ -145,6 +146,8 @@ static int ixp4xx_i2c_probe(struct devic + return err; } -- start=jiffies; -+ getscl(adap); - while (! getscl(adap) ) { - /* the hw knows how to read the clock line, - * so we wait until it actually gets high. - * This is safer as some chips may hold it low - * while they are processing data internally. - */ -- if (time_after_eq(jiffies, start+adap->timeout)) { -+ setscl(adap,1); -+ getscl(adap); -+ if (i++ > 10) - return -ETIMEDOUT; -- } -- cond_resched(); - } -- DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start)); -- udelay(adap->udelay); -+// DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start)); -+// udelay(adap->udelay); - return 0; - } ++ printk(KERN_INFO "i2c: ixp4xx 0.0.3\n"); ++ + dev_set_drvdata(&plat_dev->dev, drv_data); -@@ -111,6 +112,8 @@ static void i2c_start(struct i2c_algo_bi - { - /* assert: scl, sda are high */ - DEBPROTO(printk("S ")); -+ sclhi(adap); -+ sdahi(adap); - sdalo(adap); - scllo(adap); - } -@@ -120,7 +123,7 @@ static void i2c_repstart(struct i2c_algo - /* scl, sda may not be high */ - DEBPROTO(printk(" Sr ")); - setsda(adap,1); -- sclhi(adap); -+ setscl(adap,1); - udelay(adap->udelay); - - sdalo(adap); -@@ -132,8 +135,8 @@ static void i2c_stop(struct i2c_algo_bit - { - DEBPROTO(printk("P\n")); - /* assert: scl is low */ -+ sclhi(adap); - sdalo(adap); -- sclhi(adap); - sdahi(adap); - } + return 0; +--- linux-nas100d.orig/drivers/i2c/algos/i2c-algo-bit.c 2005-11-15 11:01:31.000000000 +0100 ++++ linux-nas100d/drivers/i2c/algos/i2c-algo-bit.c 2005-11-15 11:47:33.000000000 +0100 +@@ -44,8 +44,8 @@ -@@ -154,34 +157,28 @@ static int i2c_outb(struct i2c_adapter * - struct i2c_algo_bit_data *adap = i2c_adap->algo_data; + /* module parameters: + */ +-static int i2c_debug; +-static int bit_test; /* see if the line-setting functions work */ ++static int i2c_debug=2; ++static int bit_test=1; /* see if the line-setting functions work */ - /* assert: scl is low */ -+ setscl(adap,0); - for ( i=7 ; i>=0 ; i-- ) { - sb = c & ( 1 << i ); - setsda(adap,sb); - udelay(adap->udelay); - DEBPROTO(printk(KERN_DEBUG "%d",sb!=0)); -- if (sclhi(adap)<0) { /* timed out */ -- sdahi(adap); /* we don't want to block the net */ -- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at bit #%d\n", c&0xff, i)); -- return -ETIMEDOUT; -- }; -- /* do arbitration here: -- * if ( sb && ! getsda(adap) ) -> ouch! Get out of here. -- */ -- setscl(adap, 0 ); -- udelay(adap->udelay); -+ sclhi(adap); -+ printk(" "); -+ scllo(adap); - } -- sdahi(adap); -- if (sclhi(adap)<0){ /* timeout */ -- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at ack\n", c&0xff)); -- return -ETIMEDOUT; -- }; -+ setscl(adap,0); -+ setsda(adap,1); -+ udelay(adap->udelay); -+ ack=getsda(adap); -+ sclhi(adap); - /* read ack: SDA should be pulled down by slave */ - ack=getsda(adap); /* ack: sda is pulled low ->success. */ -- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x , getsda() = %d\n", c & 0xff, ack)); -- -- DEBPROTO( printk(KERN_DEBUG "[%2.2x]",c&0xff) ); - DEBPROTO(if (0==ack){ printk(KERN_DEBUG " A ");} else printk(KERN_DEBUG " NA ") ); -- scllo(adap); -+ setsda(adap,0); -+ setscl(adap,0); -+ -+ udelay(adap->udelay); - return 0==ack; /* return 1 if device acked */ - /* assert: scl is low (sda undef) */ - } -@@ -196,14 +193,15 @@ static int i2c_inb(struct i2c_adapter *i - struct i2c_algo_bit_data *adap = i2c_adap->algo_data; + /* --- setting states on the bus with the right timing: --------------- */ - /* assert: scl is low */ -- sdahi(adap); -+ setscl(adap,0); - for (i=0;i<8;i++) { -+ getsda(adap); - if (sclhi(adap)<0) { /* timeout */ - DEB2(printk(KERN_DEBUG " i2c_inb: timeout at bit #%d\n", 7-i)); +@@ -203,6 +203,7 @@ static int i2c_inb(struct i2c_adapter *i return -ETIMEDOUT; }; -- indata *= 2; -- if ( getsda(adap) ) -+ indata = indata << 1; -+ if (getsda(adap)) + indata *= 2; ++ udelay(adap->udelay); + if ( getsda(adap) ) indata |= 0x01; scllo(adap); - } -@@ -469,16 +467,16 @@ static int bit_xfer(struct i2c_adapter * - struct i2c_msg msgs[], int num) - { - struct i2c_msg *pmsg; -- struct i2c_algo_bit_data *adap = i2c_adap->algo_data; -+// struct i2c_algo_bit_data *adap = i2c_adap->algo_data; - - int i,ret; -- unsigned short nak_ok; -+// unsigned short nak_ok; +@@ -544,6 +545,8 @@ int i2c_bit_add_bus(struct i2c_adapter * + adap->timeout = 100; /* default values, should */ + adap->retries = 3; /* be replaced by defines */ -- i2c_start(adap); -+// i2c_start(adap); - for (i=0;i<num;i++) { - pmsg = &msgs[i]; -- nak_ok = pmsg->flags & I2C_M_IGNORE_NAK; -- if (!(pmsg->flags & I2C_M_NOSTART)) { -+// nak_ok = pmsg->flags & I2C_M_IGNORE_NAK; -+/* if (!(pmsg->flags & I2C_M_NOSTART)) { - if (i) { - i2c_repstart(adap); - } -@@ -489,6 +487,7 @@ static int bit_xfer(struct i2c_adapter * - return (ret<0) ? ret : -EREMOTEIO; - } - } -+*/ - if (pmsg->flags & I2C_M_RD ) { - /* read bytes into buffer*/ - ret = readbytes(i2c_adap, pmsg); -@@ -505,7 +504,7 @@ static int bit_xfer(struct i2c_adapter * - } - } - } -- i2c_stop(adap); -+// i2c_stop(adap); - return num; ++ printk(KERN_INFO "i2c: algo-bit 0.0.3\n"); ++ + i2c_add_adapter(adap); + return 0; } +@@ -561,9 +564,11 @@ MODULE_AUTHOR("Simon G. Vogl <simon@tk.u + MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm"); + MODULE_LICENSE("GPL"); -@@ -530,6 +529,8 @@ int i2c_bit_add_bus(struct i2c_adapter * - { - struct i2c_algo_bit_data *bit_adap = adap->algo_data; ++/* + module_param(bit_test, bool, 0); + module_param(i2c_debug, int, S_IRUGO | S_IWUSR); -+ printk(KERN_INFO "i2c: nas100d 0.0.3\n"); -+ - if (bit_test) { - int ret = test_bus(bit_adap, adap->name); - if (ret<0) + MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck"); + MODULE_PARM_DESC(i2c_debug, + "debug level - 0 off; 1 normal; 2,3 more verbose; 9 bit-protocol"); ++*/ |