diff options
Diffstat (limited to 'packages/linux')
| -rw-r--r-- | packages/linux/linux-mainstone/.mtn2git_empty | 0 | ||||
| -rw-r--r-- | packages/linux/linux-mainstone/mainstone-keypad.patch | 7631 | ||||
| -rw-r--r-- | packages/linux/linux-mainstone/mainstone/.mtn2git_empty | 0 | ||||
| -rw-r--r-- | packages/linux/linux-mainstone/mainstone/defconfig | 1608 | ||||
| -rw-r--r-- | packages/linux/linux-mainstone_2.6.25-rc4.bb | 25 | ||||
| -rw-r--r-- | packages/linux/linux-rp-2.6.24/htcuni.patch | 205 | ||||
| -rw-r--r-- | packages/linux/linux-rp-2.6.24/sharpsl-rc-r1.patch | 42 |
7 files changed, 9388 insertions, 123 deletions
diff --git a/packages/linux/linux-mainstone/.mtn2git_empty b/packages/linux/linux-mainstone/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-mainstone/.mtn2git_empty diff --git a/packages/linux/linux-mainstone/mainstone-keypad.patch b/packages/linux/linux-mainstone/mainstone-keypad.patch new file mode 100644 index 0000000000..cad6289260 --- /dev/null +++ b/packages/linux/linux-mainstone/mainstone-keypad.patch @@ -0,0 +1,7631 @@ +diff -NbBur linux-2.6.25-rc4-orig/arch/arm/mach-pxa/devices.c linux-2.6.25-rc4/arch/arm/mach-pxa/devices.c +--- linux-2.6.25-rc4-orig/arch/arm/mach-pxa/devices.c 2008-03-08 18:25:54.000000000 +0100 ++++ linux-2.6.25-rc4/arch/arm/mach-pxa/devices.c 2008-03-08 16:22:35.000000000 +0100 +@@ -396,6 +396,31 @@ + + #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + ++static struct resource pxa27x_resource_keypad[] = { ++ [0] = { ++ .start = 0x41500000, ++ .end = 0x4150004c, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_KEYPAD, ++ .end = IRQ_KEYPAD, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device pxa27x_device_keypad = { ++ .name = "pxa27x-keypad", ++ .id = -1, ++ .resource = pxa27x_resource_keypad, ++ .num_resources = ARRAY_SIZE(pxa27x_resource_keypad), ++}; ++ ++void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info) ++{ ++ pxa_register_device(&pxa27x_device_keypad, info); ++} ++ + static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32); + + static struct resource pxa27x_resource_ohci[] = { +diff -NbBur linux-2.6.25-rc4-orig/arch/arm/mach-pxa/devices.h linux-2.6.25-rc4/arch/arm/mach-pxa/devices.h +--- linux-2.6.25-rc4-orig/arch/arm/mach-pxa/devices.h 2008-03-08 18:25:54.000000000 +0100 ++++ linux-2.6.25-rc4/arch/arm/mach-pxa/devices.h 2008-03-08 16:22:35.000000000 +0100 +@@ -14,6 +14,7 @@ + + extern struct platform_device pxa27x_device_i2c_power; + extern struct platform_device pxa27x_device_ohci; ++extern struct platform_device pxa27x_device_keypad; + + extern struct platform_device pxa25x_device_ssp; + extern struct platform_device pxa25x_device_nssp; +diff -NbBur linux-2.6.25-rc4-orig/arch/arm/mach-pxa/mainstone.c linux-2.6.25-rc4/arch/arm/mach-pxa/mainstone.c +--- linux-2.6.25-rc4-orig/arch/arm/mach-pxa/mainstone.c 2008-03-08 18:25:54.000000000 +0100 ++++ linux-2.6.25-rc4/arch/arm/mach-pxa/mainstone.c 2008-03-08 16:11:42.000000000 +0100 +@@ -46,6 +46,7 @@ + #include <asm/arch/mmc.h> + #include <asm/arch/irda.h> + #include <asm/arch/ohci.h> ++#include <asm/arch/pxa27x_keypad.h> + + #include "generic.h" + #include "devices.h" +@@ -460,6 +461,72 @@ + .init = mainstone_ohci_init, + }; + ++#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) ++static unsigned int mainstone_matrix_keys[] = { ++ KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C), ++ KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F), ++ KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I), ++ KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L), ++ KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O), ++ KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R), ++ KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U), ++ KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X), ++ KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z), ++ ++ KEY(0, 4, KEY_DOT), /* . */ ++ KEY(1, 4, KEY_CLOSE), /* @ */ ++ KEY(4, 4, KEY_SLASH), ++ KEY(5, 4, KEY_BACKSLASH), ++ KEY(0, 5, KEY_HOME), ++ KEY(1, 5, KEY_LEFTSHIFT), ++ KEY(2, 5, KEY_SPACE), ++ KEY(3, 5, KEY_SPACE), ++ KEY(4, 5, KEY_ENTER), ++ KEY(5, 5, KEY_BACKSPACE), ++ ++ KEY(0, 6, KEY_UP), ++ KEY(1, 6, KEY_DOWN), ++ KEY(2, 6, KEY_LEFT), ++ KEY(3, 6, KEY_RIGHT), ++ KEY(4, 6, KEY_SELECT), ++}; ++ ++struct pxa27x_keypad_platform_data mainstone_keypad_info = { ++ .matrix_key_rows = 6, ++ .matrix_key_cols = 7, ++ .matrix_key_map = mainstone_matrix_keys, ++ .matrix_key_map_size = ARRAY_SIZE(mainstone_matrix_keys), ++ ++ .enable_rotary0 = 1, ++ .rotary0_up_key = KEY_UP, ++ .rotary0_down_key = KEY_DOWN, ++ ++ .debounce_interval = 30, ++}; ++ ++static void __init mainstone_init_keypad(void) ++{ ++ pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN); /* MKIN0 */ ++ pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN); /* MKIN1 */ ++ pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN); /* MKIN2 */ ++ pxa_gpio_mode( 97 | GPIO_ALT_FN_3_IN); /* MKIN3 */ ++ pxa_gpio_mode( 98 | GPIO_ALT_FN_3_IN); /* MKIN4 */ ++ pxa_gpio_mode( 99 | GPIO_ALT_FN_3_IN); /* MKIN5 */ ++ pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* MKOUT0 */ ++ pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* MKOUT1 */ ++ pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* MKOUT2 */ ++ pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* MKOUT3 */ ++ pxa_gpio_mode(107 | GPIO_ALT_FN_2_OUT); /* MKOUT4 */ ++ pxa_gpio_mode(108 | GPIO_ALT_FN_2_OUT); /* MKOUT5 */ ++ pxa_gpio_mode( 93 | GPIO_ALT_FN_1_IN); /* DKIN0 */ ++ pxa_gpio_mode( 94 | GPIO_ALT_FN_1_IN); /* DKIN1 */ ++ ++ pxa_set_keypad_info(&mainstone_keypad_info); ++} ++#else ++static inline void mainstone_init_keypad(void) { } ++#endif ++ + static void __init mainstone_init(void) + { + int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ +@@ -520,6 +587,8 @@ + pxa_set_mci_info(&mainstone_mci_platform_data); + pxa_set_ficp_info(&mainstone_ficp_platform_data); + pxa_set_ohci_info(&mainstone_ohci_platform_data); ++ ++ mainstone_init_keypad(); + } + + +diff -NbBur linux-2.6.25-rc4-orig/arch/arm/mach-pxa/pxa27x.c linux-2.6.25-rc4/arch/arm/mach-pxa/pxa27x.c +--- linux-2.6.25-rc4-orig/arch/arm/mach-pxa/pxa27x.c 2008-03-08 18:25:54.000000000 +0100 ++++ linux-2.6.25-rc4/arch/arm/mach-pxa/pxa27x.c 2008-03-08 16:22:35.000000000 +0100 +@@ -151,7 +151,7 @@ + + INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev), + INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), +- INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), ++ INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), + + INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), + INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), +diff -NbBur linux-2.6.25-rc4-orig/arch/arm/mach-pxa/pxa3xx.c linux-2.6.25-rc4/arch/arm/mach-pxa/pxa3xx.c +--- linux-2.6.25-rc4-orig/arch/arm/mach-pxa/pxa3xx.c 2008-03-08 18:25:54.000000000 +0100 ++++ linux-2.6.25-rc4/arch/arm/mach-pxa/pxa3xx.c 2008-03-08 16:22:35.000000000 +0100 +@@ -185,6 +185,7 @@ + PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), + PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), + PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev), ++ PXA3xx_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), + + PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), + PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/akita.h linux-2.6.25-rc4/include/asm-arm/arch/akita.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/akita.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/akita.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,32 @@ ++/* ++ * Hardware specific definitions for SL-C1000 (Akita) ++ * ++ * Copyright (c) 2005 Richard Purdie ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++/* Akita IO Expander GPIOs */ ++ ++#define AKITA_IOEXP_RESERVED_7 (1 << 7) ++#define AKITA_IOEXP_IR_ON (1 << 6) ++#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) ++#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) ++#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) ++#define AKITA_IOEXP_MIC_BIAS (1 << 2) ++#define AKITA_IOEXP_RESERVED_1 (1 << 1) ++#define AKITA_IOEXP_RESERVED_0 (1 << 0) ++ ++/* Direction Bitfield 0=output 1=input */ ++#define AKITA_IOEXP_IO_DIR 0 ++/* Default Values */ ++#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP) ++ ++extern struct platform_device akitaioexp_device; ++ ++void akita_set_ioexp(struct device *dev, unsigned char bitmask); ++void akita_reset_ioexp(struct device *dev, unsigned char bitmask); ++ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/audio.h linux-2.6.25-rc4/include/asm-arm/arch/audio.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/audio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/audio.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,15 @@ ++#ifndef __ASM_ARCH_AUDIO_H__ ++#define __ASM_ARCH_AUDIO_H__ ++ ++#include <sound/core.h> ++#include <sound/pcm.h> ++ ++typedef struct { ++ int (*startup)(struct snd_pcm_substream *, void *); ++ void (*shutdown)(struct snd_pcm_substream *, void *); ++ void (*suspend)(void *); ++ void (*resume)(void *); ++ void *priv; ++} pxa2xx_audio_ops_t; ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/bitfield.h linux-2.6.25-rc4/include/asm-arm/arch/bitfield.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/bitfield.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/bitfield.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,113 @@ ++/* ++ * FILE bitfield.h ++ * ++ * Version 1.1 ++ * Author Copyright (c) Marc A. Viredaz, 1998 ++ * DEC Western Research Laboratory, Palo Alto, CA ++ * Date April 1998 (April 1997) ++ * System Advanced RISC Machine (ARM) ++ * Language C or ARM Assembly ++ * Purpose Definition of macros to operate on bit fields. ++ */ ++ ++ ++ ++#ifndef __BITFIELD_H ++#define __BITFIELD_H ++ ++#ifndef __ASSEMBLY__ ++#define UData(Data) ((unsigned long) (Data)) ++#else ++#define UData(Data) (Data) ++#endif ++ ++ ++/* ++ * MACRO: Fld ++ * ++ * Purpose ++ * The macro "Fld" encodes a bit field, given its size and its shift value ++ * with respect to bit 0. ++ * ++ * Note ++ * A more intuitive way to encode bit fields would have been to use their ++ * mask. However, extracting size and shift value information from a bit ++ * field's mask is cumbersome and might break the assembler (255-character ++ * line-size limit). ++ * ++ * Input ++ * Size Size of the bit field, in number of bits. ++ * Shft Shift value of the bit field with respect to bit 0. ++ * ++ * Output ++ * Fld Encoded bit field. ++ */ ++ ++#define Fld(Size, Shft) (((Size) << 16) + (Shft)) ++ ++ ++/* ++ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit ++ * ++ * Purpose ++ * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return ++ * the size, shift value, mask, aligned mask, and first bit of a ++ * bit field. ++ * ++ * Input ++ * Field Encoded bit field (using the macro "Fld"). ++ * ++ * Output ++ * FSize Size of the bit field, in number of bits. ++ * FShft Shift value of the bit field with respect to bit 0. ++ * FMsk Mask for the bit field. ++ * FAlnMsk Mask for the bit field, aligned on bit 0. ++ * F1stBit First bit of the bit field. ++ */ ++ ++#define FSize(Field) ((Field) >> 16) ++#define FShft(Field) ((Field) & 0x0000FFFF) ++#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) ++#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) ++#define F1stBit(Field) (UData (1) << FShft (Field)) ++ ++ ++/* ++ * MACRO: FInsrt ++ * ++ * Purpose ++ * The macro "FInsrt" inserts a value into a bit field by shifting the ++ * former appropriately. ++ * ++ * Input ++ * Value Bit-field value. ++ * Field Encoded bit field (using the macro "Fld"). ++ * ++ * Output ++ * FInsrt Bit-field value positioned appropriately. ++ */ ++ ++#define FInsrt(Value, Field) \ ++ (UData (Value) << FShft (Field)) ++ ++ ++/* ++ * MACRO: FExtr ++ * ++ * Purpose ++ * The macro "FExtr" extracts the value of a bit field by masking and ++ * shifting it appropriately. ++ * ++ * Input ++ * Data Data containing the bit-field to be extracted. ++ * Field Encoded bit field (using the macro "Fld"). ++ * ++ * Output ++ * FExtr Bit-field value. ++ */ ++ ++#define FExtr(Data, Field) \ ++ ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) ++ ++ ++#endif /* __BITFIELD_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/cm-x270.h linux-2.6.25-rc4/include/asm-arm/arch/cm-x270.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/cm-x270.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/cm-x270.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,50 @@ ++/* ++ * linux/include/asm/arch-pxa/cm-x270.h ++ * ++ * Copyright Compulab Ltd., 2003, 2007 ++ * Mike Rapoport <mike@compulab.co.il> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++/* CM-x270 device physical addresses */ ++#define CMX270_CS1_PHYS (PXA_CS1_PHYS) ++#define MARATHON_PHYS (PXA_CS2_PHYS) ++#define CMX270_IDE104_PHYS (PXA_CS3_PHYS) ++#define CMX270_IT8152_PHYS (PXA_CS4_PHYS) ++ ++/* Statically mapped regions */ ++#define CMX270_VIRT_BASE (0xe8000000) ++#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) ++#define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + SZ_64M) ++ ++/* GPIO related definitions */ ++#define GPIO_IT8152_IRQ (22) ++ ++#define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ) ++#define PME_IRQ IRQ_GPIO(0) ++#define CMX270_IDE_IRQ IRQ_GPIO(100) ++#define CMX270_GPIRQ1 IRQ_GPIO(101) ++#define CMX270_TOUCHIRQ IRQ_GPIO(96) ++#define CMX270_ETHIRQ IRQ_GPIO(10) ++#define CMX270_GFXIRQ IRQ_GPIO(95) ++#define CMX270_NANDIRQ IRQ_GPIO(89) ++#define CMX270_MMC_IRQ IRQ_GPIO(83) ++ ++/* PCMCIA related definitions */ ++#define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x))) ++#define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(82 - (x))) ++ ++#define PCMCIA_S0_CD_VALID IRQ_GPIO(84) ++#define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES ++ ++#define PCMCIA_S1_CD_VALID IRQ_GPIO(83) ++#define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES ++ ++#define PCMCIA_S0_RDYINT IRQ_GPIO(82) ++#define PCMCIA_S1_RDYINT IRQ_GPIO(81) ++ ++#define PCMCIA_RESET_GPIO 53 +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/colibri.h linux-2.6.25-rc4/include/asm-arm/arch/colibri.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/colibri.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/colibri.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,19 @@ ++#ifndef _COLIBRI_H_ ++#define _COLIBRI_H_ ++ ++/* physical memory regions */ ++#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ ++#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ ++#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ ++ ++/* virtual memory regions */ ++#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */ ++ ++/* size of flash */ ++#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ ++ ++/* Ethernet Controller Davicom DM9000 */ ++#define GPIO_DM9000 114 ++#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000) ++ ++#endif /* _COLIBRI_H_ */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/corgi.h linux-2.6.25-rc4/include/asm-arm/arch/corgi.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/corgi.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/corgi.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,109 @@ ++/* ++ * Hardware specific definitions for SL-C7xx series of PDAs ++ * ++ * Copyright (c) 2004-2005 Richard Purdie ++ * ++ * Based on Sharp's 2.4 kernel patches ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef __ASM_ARCH_CORGI_H ++#define __ASM_ARCH_CORGI_H 1 ++ ++ ++/* ++ * Corgi (Non Standard) GPIO Definitions ++ */ ++#define CORGI_GPIO_KEY_INT (0) /* Keyboard Interrupt */ ++#define CORGI_GPIO_AC_IN (1) /* Charger Detection */ ++#define CORGI_GPIO_WAKEUP (3) /* System wakeup notification? */ ++#define CORGI_GPIO_AK_INT (4) /* Headphone Jack Control Interrupt */ ++#define CORGI_GPIO_TP_INT (5) /* Touch Panel Interrupt */ ++#define CORGI_GPIO_nSD_WP (7) /* SD Write Protect? */ ++#define CORGI_GPIO_nSD_DETECT (9) /* MMC/SD Card Detect */ ++#define CORGI_GPIO_nSD_INT (10) /* SD Interrupt for SDIO? */ ++#define CORGI_GPIO_MAIN_BAT_LOW (11) /* Main Battery Low Notification */ ++#define CORGI_GPIO_BAT_COVER (11) /* Battery Cover Detect */ ++#define CORGI_GPIO_LED_ORANGE (13) /* Orange LED Control */ ++#define CORGI_GPIO_CF_CD (14) /* Compact Flash Card Detect */ ++#define CORGI_GPIO_CHRG_FULL (16) /* Charging Complete Notification */ ++#define CORGI_GPIO_CF_IRQ (17) /* Compact Flash Interrupt */ ++#define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */ ++#define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */ ++#define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */ ++#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */ ++#define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */ ++#define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */ ++#define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */ ++#define CORGI_GPIO_DISCHARGE_ON (42) /* Enable battery Discharge */ ++#define CORGI_GPIO_CHRG_UKN (43) /* Unknown Charging (Bypass Control?) */ ++#define CORGI_GPIO_HSYNC (44) /* LCD HSync Pulse */ ++#define CORGI_GPIO_USB_PULLUP (45) /* USB show presence to host */ ++ ++ ++/* ++ * Corgi Keyboard Definitions ++ */ ++#define CORGI_KEY_STROBE_NUM (12) ++#define CORGI_KEY_SENSE_NUM (8) ++#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc) ++#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000) ++#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26) ++#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003) ++#define CORGI_GPIO_LOW_SENSE_LSHIFT (6) ++#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a)) ++#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a)) ++#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0) ++#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000) ++#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f) ++#define CORGI_GPIO_KEY_SENSE(a) (58+(a)) ++#define CORGI_GPIO_KEY_STROBE(a) (66+(a)) ++ ++ ++/* ++ * Corgi Interrupts ++ */ ++#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0) ++#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1) ++#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3) ++#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4) ++#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5) ++#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) ++#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10) ++#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11) ++#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14) ++#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */ ++#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) ++#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */ ++ ++ ++/* ++ * Corgi SCOOP GPIOs and Config ++ */ ++#define CORGI_SCP_LED_GREEN SCOOP_GPCR_PA11 ++#define CORGI_SCP_SWA SCOOP_GPCR_PA12 /* Hinge Switch A */ ++#define CORGI_SCP_SWB SCOOP_GPCR_PA13 /* Hinge Switch B */ ++#define CORGI_SCP_MUTE_L SCOOP_GPCR_PA14 ++#define CORGI_SCP_MUTE_R SCOOP_GPCR_PA15 ++#define CORGI_SCP_AKIN_PULLUP SCOOP_GPCR_PA16 ++#define CORGI_SCP_APM_ON SCOOP_GPCR_PA17 ++#define CORGI_SCP_BACKLIGHT_CONT SCOOP_GPCR_PA18 ++#define CORGI_SCP_MIC_BIAS SCOOP_GPCR_PA19 ++ ++#define CORGI_SCOOP_IO_DIR ( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \ ++ CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \ ++ CORGI_SCP_MIC_BIAS ) ++#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R ) ++ ++ ++/* ++ * Shared data structures ++ */ ++extern struct platform_device corgiscoop_device; ++extern struct platform_device corgissp_device; ++ ++#endif /* __ASM_ARCH_CORGI_H */ ++ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/debug-macro.S linux-2.6.25-rc4/include/asm-arm/arch/debug-macro.S +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/debug-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/debug-macro.S 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,25 @@ ++/* linux/include/asm-arm/arch-pxa/debug-macro.S ++ * ++ * Debugging macro include header ++ * ++ * Copyright (C) 1994-1999 Russell King ++ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++*/ ++ ++#include "hardware.h" ++ ++ .macro addruart,rx ++ mrc p15, 0, \rx, c1, c0 ++ tst \rx, #1 @ MMU enabled? ++ moveq \rx, #0x40000000 @ physical ++ movne \rx, #io_p2v(0x40000000) @ virtual ++ orr \rx, \rx, #0x00100000 ++ .endm ++ ++#define UART_SHIFT 2 ++#include <asm/hardware/debug-8250.S> +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/dma.h linux-2.6.25-rc4/include/asm-arm/arch/dma.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/dma.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/dma.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,50 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/dma.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Jun 15, 2001 ++ * Copyright: MontaVista Software, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __ASM_ARCH_DMA_H ++#define __ASM_ARCH_DMA_H ++ ++/* ++ * Descriptor structure for PXA's DMA engine ++ * Note: this structure must always be aligned to a 16-byte boundary. ++ */ ++ ++typedef struct pxa_dma_desc { ++ volatile u32 ddadr; /* Points to the next descriptor + flags */ ++ volatile u32 dsadr; /* DSADR value for the current transfer */ ++ volatile u32 dtadr; /* DTADR value for the current transfer */ ++ volatile u32 dcmd; /* DCMD value for the current transfer */ ++} pxa_dma_desc; ++ ++typedef enum { ++ DMA_PRIO_HIGH = 0, ++ DMA_PRIO_MEDIUM = 1, ++ DMA_PRIO_LOW = 2 ++} pxa_dma_prio; ++ ++#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) ++#define HAVE_ARCH_PCI_SET_DMA_MASK 1 ++#endif ++ ++/* ++ * DMA registration ++ */ ++ ++int __init pxa_init_dma(int num_ch); ++ ++int pxa_request_dma (char *name, ++ pxa_dma_prio prio, ++ void (*irq_handler)(int, void *), ++ void *data); ++ ++void pxa_free_dma (int dma_ch); ++ ++#endif /* _ASM_ARCH_DMA_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/entry-macro.S linux-2.6.25-rc4/include/asm-arm/arch/entry-macro.S +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/entry-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/entry-macro.S 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,57 @@ ++/* ++ * include/asm-arm/arch-pxa/entry-macro.S ++ * ++ * Low-level IRQ helper macros for PXA-based platforms ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++#include <asm/hardware.h> ++#include <asm/arch/irqs.h> ++ ++ .macro disable_fiq ++ .endm ++ ++ .macro get_irqnr_preamble, base, tmp ++ .endm ++ ++ .macro arch_ret_to_user, tmp1, tmp2 ++ .endm ++ ++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ++ mrc p15, 0, \tmp, c0, c0, 0 @ CPUID ++ mov \tmp, \tmp, lsr #13 ++ and \tmp, \tmp, #0x7 @ Core G ++ cmp \tmp, #1 ++ bhi 1004f ++ ++ mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000 ++ add \base, \base, #0x00d00000 ++ ldr \irqstat, [\base, #0] @ ICIP ++ ldr \irqnr, [\base, #4] @ ICMR ++ b 1002f ++ ++1004: ++ mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2 ++ mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2 ++ ands \irqnr, \irqstat, \irqnr ++ beq 1003f ++ rsb \irqstat, \irqnr, #0 ++ and \irqstat, \irqstat, \irqnr ++ clz \irqnr, \irqstat ++ rsb \irqnr, \irqnr, #31 ++ add \irqnr, \irqnr, #32 ++ b 1001f ++1003: ++ mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP ++ mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR ++1002: ++ ands \irqnr, \irqstat, \irqnr ++ beq 1001f ++ rsb \irqstat, \irqnr, #0 ++ and \irqstat, \irqstat, \irqnr ++ clz \irqnr, \irqstat ++ rsb \irqnr, \irqnr, #31 ++1001: ++ .endm +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/gpio.h linux-2.6.25-rc4/include/asm-arm/arch/gpio.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/gpio.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,65 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/gpio.h ++ * ++ * PXA GPIO wrappers for arch-neutral GPIO calls ++ * ++ * Written by Philipp Zabel <philipp.zabel@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ */ ++ ++#ifndef __ASM_ARCH_PXA_GPIO_H ++#define __ASM_ARCH_PXA_GPIO_H ++ ++#include <asm/arch/pxa-regs.h> ++#include <asm/irq.h> ++#include <asm/hardware.h> ++ ++#include <asm-generic/gpio.h> ++ ++ ++/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). ++ * Those cases currently cause holes in the GPIO number space. ++ */ ++#define NR_BUILTIN_GPIO 128 ++ ++static inline int gpio_get_value(unsigned gpio) ++{ ++ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) ++ return GPLR(gpio) & GPIO_bit(gpio); ++ else ++ return __gpio_get_value(gpio); ++} ++ ++static inline void gpio_set_value(unsigned gpio, int value) ++{ ++ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { ++ if (value) ++ GPSR(gpio) = GPIO_bit(gpio); ++ else ++ GPCR(gpio) = GPIO_bit(gpio); ++ } else { ++ __gpio_set_value(gpio, value); ++ } ++} ++ ++#define gpio_cansleep __gpio_cansleep ++ ++#define gpio_to_irq(gpio) IRQ_GPIO(gpio) ++#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) ++ ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/hardware.h linux-2.6.25-rc4/include/asm-arm/arch/hardware.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/hardware.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/hardware.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,216 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/hardware.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Jun 15, 2001 ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_ARCH_HARDWARE_H ++#define __ASM_ARCH_HARDWARE_H ++ ++/* ++ * We requires absolute addresses. ++ */ ++#define PCIO_BASE 0 ++ ++/* ++ * Workarounds for at least 2 errata so far require this. ++ * The mapping is set in mach-pxa/generic.c. ++ */ ++#define UNCACHED_PHYS_0 0xff000000 ++#define UNCACHED_ADDR UNCACHED_PHYS_0 ++ ++/* ++ * Intel PXA2xx internal register mapping: ++ * ++ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff ++ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff ++ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff ++ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff ++ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff ++ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff ++ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff ++ * ++ * Note that not all PXA2xx chips implement all those addresses, and the ++ * kernel only maps the minimum needed range of this mapping. ++ */ ++#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) ++#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) ++ ++#ifndef __ASSEMBLY__ ++ ++# define __REG(x) (*((volatile u32 *)io_p2v(x))) ++ ++/* With indexed regs we don't want to feed the index through io_p2v() ++ especially if it is a variable, otherwise horrible code will result. */ ++# define __REG2(x,y) \ ++ (*(volatile u32 *)((u32)&__REG(x) + (y))) ++ ++# define __PREG(x) (io_v2p((u32)&(x))) ++ ++#else ++ ++# define __REG(x) io_p2v(x) ++# define __PREG(x) io_v2p(x) ++ ++#endif ++ ++#ifndef __ASSEMBLY__ ++ ++#ifdef CONFIG_PXA25x ++#define __cpu_is_pxa21x(id) \ ++ ({ \ ++ unsigned int _id = (id) >> 4 & 0xf3f; \ ++ _id == 0x212; \ ++ }) ++ ++#define __cpu_is_pxa25x(id) \ ++ ({ \ ++ unsigned int _id = (id) >> 4 & 0xfff; \ ++ _id == 0x2d0 || _id == 0x290; \ ++ }) ++#else ++#define __cpu_is_pxa21x(id) (0) ++#define __cpu_is_pxa25x(id) (0) ++#endif ++ ++#ifdef CONFIG_PXA27x ++#define __cpu_is_pxa27x(id) \ ++ ({ \ ++ unsigned int _id = (id) >> 4 & 0xfff; \ ++ _id == 0x411; \ ++ }) ++#else ++#define __cpu_is_pxa27x(id) (0) ++#endif ++ ++#ifdef CONFIG_CPU_PXA300 ++#define __cpu_is_pxa300(id) \ ++ ({ \ ++ unsigned int _id = (id) >> 4 & 0xfff; \ ++ _id == 0x688; \ ++ }) ++#else ++#define __cpu_is_pxa300(id) (0) ++#endif ++ ++#ifdef CONFIG_CPU_PXA310 ++#define __cpu_is_pxa310(id) \ ++ ({ \ ++ unsigned int _id = (id) >> 4 & 0xfff; \ ++ _id == 0x689; \ ++ }) ++#else ++#define __cpu_is_pxa310(id) (0) ++#endif ++ ++#ifdef CONFIG_CPU_PXA320 ++#define __cpu_is_pxa320(id) \ ++ ({ \ ++ unsigned int _id = (id) >> 4 & 0xfff; \ ++ _id == 0x603 || _id == 0x682; \ ++ }) ++#else ++#define __cpu_is_pxa320(id) (0) ++#endif ++ ++#define cpu_is_pxa21x() \ ++ ({ \ ++ __cpu_is_pxa21x(read_cpuid_id()); \ ++ }) ++ ++#define cpu_is_pxa25x() \ ++ ({ \ ++ __cpu_is_pxa25x(read_cpuid_id()); \ ++ }) ++ ++#define cpu_is_pxa27x() \ ++ ({ \ ++ __cpu_is_pxa27x(read_cpuid_id()); \ ++ }) ++ ++#define cpu_is_pxa300() \ ++ ({ \ ++ __cpu_is_pxa300(read_cpuid_id()); \ ++ }) ++ ++#define cpu_is_pxa310() \ ++ ({ \ ++ __cpu_is_pxa310(read_cpuid_id()); \ ++ }) ++ ++#define cpu_is_pxa320() \ ++ ({ \ ++ __cpu_is_pxa320(read_cpuid_id()); \ ++ }) ++ ++/* ++ * CPUID Core Generation Bit ++ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x ++ * == 0x3 for pxa300/pxa310/pxa320 ++ */ ++#define __cpu_is_pxa2xx(id) \ ++ ({ \ ++ unsigned int _id = (id) >> 13 & 0x7; \ ++ _id <= 0x2; \ ++ }) ++ ++#define __cpu_is_pxa3xx(id) \ ++ ({ \ ++ unsigned int _id = (id) >> 13 & 0x7; \ ++ _id == 0x3; \ ++ }) ++ ++#define cpu_is_pxa2xx() \ ++ ({ \ ++ __cpu_is_pxa2xx(read_cpuid_id()); \ ++ }) ++ ++#define cpu_is_pxa3xx() \ ++ ({ \ ++ __cpu_is_pxa3xx(read_cpuid_id()); \ ++ }) ++ ++/* ++ * Handy routine to set GPIO alternate functions ++ */ ++extern int pxa_gpio_mode( int gpio_mode ); ++ ++/* ++ * Return GPIO level, nonzero means high, zero is low ++ */ ++extern int pxa_gpio_get_value(unsigned gpio); ++ ++/* ++ * Set output GPIO level ++ */ ++extern void pxa_gpio_set_value(unsigned gpio, int value); ++ ++/* ++ * Routine to enable or disable CKEN ++ */ ++static inline void __deprecated pxa_set_cken(int clock, int enable) ++{ ++ extern void __pxa_set_cken(int clock, int enable); ++ __pxa_set_cken(clock, enable); ++} ++ ++/* ++ * return current memory and LCD clock frequency in units of 10kHz ++ */ ++extern unsigned int get_memclk_frequency_10khz(void); ++ ++#endif ++ ++#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) ++#define PCIBIOS_MIN_IO 0 ++#define PCIBIOS_MIN_MEM 0 ++#define pcibios_assign_all_busses() 1 ++#endif ++ ++#endif /* _ASM_ARCH_HARDWARE_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/i2c.h linux-2.6.25-rc4/include/asm-arm/arch/i2c.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/i2c.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/i2c.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,77 @@ ++/* ++ * i2c_pxa.h ++ * ++ * Copyright (C) 2002 Intrinsyc Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef _I2C_PXA_H_ ++#define _I2C_PXA_H_ ++ ++#if 0 ++#define DEF_TIMEOUT 3 ++#else ++/* need a longer timeout if we're dealing with the fact we may well be ++ * looking at a multi-master environment ++*/ ++#define DEF_TIMEOUT 32 ++#endif ++ ++#define BUS_ERROR (-EREMOTEIO) ++#define XFER_NAKED (-ECONNREFUSED) ++#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ ++ ++/* ICR initialize bit values ++* ++* 15. FM 0 (100 Khz operation) ++* 14. UR 0 (No unit reset) ++* 13. SADIE 0 (Disables the unit from interrupting on slave addresses ++* matching its slave address) ++* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration ++* in master mode) ++* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) ++* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) ++* 9. IRFIE 1 (Enable interrupts from full buffer received) ++* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) ++* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) ++* 6. IUE 0 (Disable unit until we change settings) ++* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) ++* 4. MA 0 (Only send stop with the ICR stop bit) ++* 3. TB 0 (We are not transmitting a byte initially) ++* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) ++* 1. STOP 0 (Do not send a STOP) ++* 0. START 0 (Do not send a START) ++* ++*/ ++#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) ++ ++/* I2C status register init values ++ * ++ * 10. BED 1 (Clear bus error detected) ++ * 9. SAD 1 (Clear slave address detected) ++ * 7. IRF 1 (Clear IDBR Receive Full) ++ * 6. ITE 1 (Clear IDBR Transmit Empty) ++ * 5. ALD 1 (Clear Arbitration Loss Detected) ++ * 4. SSD 1 (Clear Slave Stop Detected) ++ */ ++#define I2C_ISR_INIT 0x7FF /* status register init */ ++ ++struct i2c_slave_client; ++ ++struct i2c_pxa_platform_data { ++ unsigned int slave_addr; ++ struct i2c_slave_client *slave; ++ unsigned int class; ++ int use_pio; ++}; ++ ++extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); ++ ++#ifdef CONFIG_PXA27x ++extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info); ++#endif ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/idp.h linux-2.6.25-rc4/include/asm-arm/arch/idp.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/idp.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/idp.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,199 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/idp.h ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc. ++ * ++ * 2001-09-13: Cliff Brake <cbrake@accelent.com> ++ * Initial code ++ * ++ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com> ++ * <http://www.vibren.com> <http://bec-systems.com> ++ * Changes for 2.6 kernel. ++ */ ++ ++ ++/* ++ * Note: this file must be safe to include in assembly files ++ * ++ * Support for the Vibren PXA255 IDP requires rev04 or later ++ * IDP hardware. ++ */ ++ ++ ++#define IDP_FLASH_PHYS (PXA_CS0_PHYS) ++#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) ++#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS) ++#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000) ++#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000) ++#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000) ++#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000) ++ ++ ++/* ++ * virtual memory map ++ */ ++ ++#define IDP_COREVOLT_VIRT (0xf0000000) ++#define IDP_COREVOLT_SIZE (1*1024*1024) ++ ++#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE) ++#define IDP_CPLD_SIZE (1*1024*1024) ++ ++#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000 ++#error Your custom IO space is getting a bit large !! ++#endif ++ ++#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT) ++#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS) ++ ++#ifndef __ASSEMBLY__ ++# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x))) ++#else ++# define __CPLD_REG(x) CPLD_P2V(x) ++#endif ++ ++/* board level registers in the CPLD: (offsets from CPLD_VIRT) */ ++ ++#define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00) ++#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04) ++#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x08) ++#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C) ++#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10) ++#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14) ++#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18) ++#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C) ++#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20) ++#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24) ++#define _IDP_CPLD_PCCARD_PWR (IDP_CPLD_PHYS + 0x28) ++#define _IDP_CPLD_MISC_CTRL (IDP_CPLD_PHYS + 0x2C) ++#define _IDP_CPLD_LCD (IDP_CPLD_PHYS + 0x30) ++#define _IDP_CPLD_FLASH_WE (IDP_CPLD_PHYS + 0x34) ++ ++#define _IDP_CPLD_KB_ROW (IDP_CPLD_PHYS + 0x50) ++#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x54) ++#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x58) ++#define _IDP_CPLD_MISC_STATUS (IDP_CPLD_PHYS + 0x5C) ++ ++/* FPGA register virtual addresses */ ++ ++#define IDP_CPLD_REV __CPLD_REG(_IDP_CPLD_REV) ++#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR) ++#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL) ++#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH) ++#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW) ++#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN) ++#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR) ++#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE) ++#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR) ++#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE) ++#define IDP_CPLD_PCCARD_PWR __CPLD_REG(_IDP_CPLD_PCCARD_PWR) ++#define IDP_CPLD_MISC_CTRL __CPLD_REG(_IDP_CPLD_MISC_CTRL) ++#define IDP_CPLD_LCD __CPLD_REG(_IDP_CPLD_LCD) ++#define IDP_CPLD_FLASH_WE __CPLD_REG(_IDP_CPLD_FLASH_WE) ++ ++#define IDP_CPLD_KB_ROW __CPLD_REG(_IDP_CPLD_KB_ROW) ++#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS) ++#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS) ++#define IDP_CPLD_MISC_STATUS __CPLD_REG(_IDP_CPLD_MISC_STATUS) ++ ++ ++/* ++ * Bit masks for various registers ++ */ ++ ++// IDP_CPLD_PCCARD_PWR ++#define PCC0_PWR0 (1 << 0) ++#define PCC0_PWR1 (1 << 1) ++#define PCC0_PWR2 (1 << 2) ++#define PCC0_PWR3 (1 << 3) ++#define PCC1_PWR0 (1 << 4) ++#define PCC1_PWR1 (1 << 5) ++#define PCC1_PWR2 (1 << 6) ++#define PCC1_PWR3 (1 << 7) ++ ++// IDP_CPLD_PCCARD_EN ++#define PCC0_RESET (1 << 6) ++#define PCC1_RESET (1 << 7) ++#define PCC0_ENABLE (1 << 0) ++#define PCC1_ENABLE (1 << 1) ++ ++// IDP_CPLD_PCCARDx_STATUS ++#define _PCC_WRPROT (1 << 7) // 7-4 read as low true ++#define _PCC_RESET (1 << 6) ++#define _PCC_IRQ (1 << 5) ++#define _PCC_INPACK (1 << 4) ++#define PCC_BVD2 (1 << 3) ++#define PCC_BVD1 (1 << 2) ++#define PCC_VS2 (1 << 1) ++#define PCC_VS1 (1 << 0) ++ ++#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x))) ++ ++/* A listing of interrupts used by external hardware devices */ ++ ++#define TOUCH_PANEL_IRQ IRQ_GPIO(5) ++#define IDE_IRQ IRQ_GPIO(21) ++ ++#define TOUCH_PANEL_IRQ_EDGE IRQT_FALLING ++ ++#define ETHERNET_IRQ IRQ_GPIO(4) ++#define ETHERNET_IRQ_EDGE IRQT_RISING ++ ++#define IDE_IRQ_EDGE IRQT_RISING ++ ++#define PCMCIA_S0_CD_VALID IRQ_GPIO(7) ++#define PCMCIA_S0_CD_VALID_EDGE IRQT_BOTHEDGE ++ ++#define PCMCIA_S1_CD_VALID IRQ_GPIO(8) ++#define PCMCIA_S1_CD_VALID_EDGE IRQT_BOTHEDGE ++ ++#define PCMCIA_S0_RDYINT IRQ_GPIO(19) ++#define PCMCIA_S1_RDYINT IRQ_GPIO(22) ++ ++ ++/* ++ * Macros for LED Driver ++ */ ++ ++/* leds 0 = ON */ ++#define IDP_HB_LED (1<<5) ++#define IDP_BUSY_LED (1<<6) ++ ++#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED) ++ ++/* ++ * macros for MTD driver ++ */ ++ ++#define FLASH_WRITE_PROTECT_DISABLE() ((IDP_CPLD_FLASH_WE) &= ~(0x1)) ++#define FLASH_WRITE_PROTECT_ENABLE() ((IDP_CPLD_FLASH_WE) |= (0x1)) ++ ++/* ++ * macros for matrix keyboard driver ++ */ ++ ++#define KEYBD_MATRIX_NUMBER_INPUTS 7 ++#define KEYBD_MATRIX_NUMBER_OUTPUTS 14 ++ ++#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE ++#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE ++ ++#define KEYBD_MATRIX_SETTLING_TIME_US 100 ++#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2 ++ ++#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \ ++{\ ++ IDP_CPLD_KB_COL_LOW = outputs;\ ++ IDP_CPLD_KB_COL_HIGH = outputs >> 7;\ ++} ++ ++#define KEYBD_MATRIX_GET_INPUTS(inputs) \ ++{\ ++ inputs = (IDP_CPLD_KB_ROW & 0x7f);\ ++} ++ ++ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/io.h linux-2.6.25-rc4/include/asm-arm/arch/io.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/io.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/io.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,20 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/io.h ++ * ++ * Copied from asm/arch/sa1100/io.h ++ */ ++#ifndef __ASM_ARM_ARCH_IO_H ++#define __ASM_ARM_ARCH_IO_H ++ ++#include <asm/hardware.h> ++ ++#define IO_SPACE_LIMIT 0xffffffff ++ ++/* ++ * We don't actually have real ISA nor PCI buses, but there is so many ++ * drivers out there that might just work if we fake them... ++ */ ++#define __io(a) ((void __iomem *)(a)) ++#define __mem_pci(a) (a) ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/irda.h linux-2.6.25-rc4/include/asm-arm/arch/irda.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/irda.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/irda.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,17 @@ ++#ifndef ASMARM_ARCH_IRDA_H ++#define ASMARM_ARCH_IRDA_H ++ ++/* board specific transceiver capabilities */ ++ ++#define IR_OFF 1 ++#define IR_SIRMODE 2 ++#define IR_FIRMODE 4 ++ ++struct pxaficp_platform_data { ++ int transceiver_cap; ++ void (*transceiver_mode)(struct device *dev, int mode); ++}; ++ ++extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/irqs.h linux-2.6.25-rc4/include/asm-arm/arch/irqs.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/irqs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/irqs.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,257 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/irqs.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Jun 15, 2001 ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++#define PXA_IRQ(x) (x) ++ ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) ++#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ ++#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */ ++#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */ ++#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */ ++#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */ ++#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */ ++#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */ ++#endif ++ ++#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */ ++#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */ ++#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */ ++#define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */ ++#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */ ++#define IRQ_USB PXA_IRQ(11) /* USB Service */ ++#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */ ++#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */ ++#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */ ++#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */ ++#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */ ++#define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */ ++#define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */ ++#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */ ++#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */ ++#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */ ++#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */ ++#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */ ++#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/ ++#define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */ ++#define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */ ++#define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */ ++#define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */ ++#define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */ ++#define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */ ++#define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */ ++#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */ ++#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */ ++ ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) ++#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */ ++#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */ ++#endif ++ ++#ifdef CONFIG_PXA3xx ++#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */ ++#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */ ++#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */ ++#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */ ++#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */ ++#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */ ++#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */ ++#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */ ++#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */ ++#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */ ++#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */ ++#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */ ++#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ ++#endif ++ ++#define PXA_GPIO_IRQ_BASE (64) ++#define PXA_GPIO_IRQ_NUM (128) ++ ++#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) ++#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) ++ ++#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) ++#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) ++ ++/* ++ * The next 16 interrupts are for board specific purposes. Since ++ * the kernel can only run on one machine at a time, we can re-use ++ * these. If you need more, increase IRQ_BOARD_END, but keep it ++ * within sensible limits. ++ */ ++#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) ++#define IRQ_BOARD_END (IRQ_BOARD_START + 16) ++ ++#define IRQ_SA1111_START (IRQ_BOARD_END) ++#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) ++#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) ++#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) ++#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) ++#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) ++#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) ++#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) ++#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) ++#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) ++#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) ++#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) ++#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) ++#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) ++#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) ++#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) ++#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) ++#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) ++#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) ++#define IRQ_MSTXINT (IRQ_BOARD_END + 18) ++#define IRQ_MSRXINT (IRQ_BOARD_END + 19) ++#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) ++#define IRQ_TPTXINT (IRQ_BOARD_END + 21) ++#define IRQ_TPRXINT (IRQ_BOARD_END + 22) ++#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) ++#define SSPXMTINT (IRQ_BOARD_END + 24) ++#define SSPRCVINT (IRQ_BOARD_END + 25) ++#define SSPROR (IRQ_BOARD_END + 26) ++#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) ++#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) ++#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) ++#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) ++#define AUDTFSR (IRQ_BOARD_END + 36) ++#define AUDRFSR (IRQ_BOARD_END + 37) ++#define AUDTUR (IRQ_BOARD_END + 38) ++#define AUDROR (IRQ_BOARD_END + 39) ++#define AUDDTS (IRQ_BOARD_END + 40) ++#define AUDRDD (IRQ_BOARD_END + 41) ++#define AUDSTO (IRQ_BOARD_END + 42) ++#define IRQ_USBPWR (IRQ_BOARD_END + 43) ++#define IRQ_HCIM (IRQ_BOARD_END + 44) ++#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) ++#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) ++#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) ++#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) ++#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) ++#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) ++#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) ++#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) ++#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) ++#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) ++ ++#define IRQ_LOCOMO_START (IRQ_BOARD_END) ++#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) ++#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) ++#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) ++#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) ++#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) ++#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) ++#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) ++#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) ++#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) ++#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) ++#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) ++#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) ++#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) ++#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) ++#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) ++#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) ++#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) ++#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) ++#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) ++#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) ++#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20) ++#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) ++ ++/* ++ * Figure out the MAX IRQ number. ++ * ++ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. ++ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 ++ * Otherwise, we have the standard IRQs only. ++ */ ++#ifdef CONFIG_SA1111 ++#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) ++#elif defined(CONFIG_SHARP_LOCOMO) ++#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) ++#elif defined(CONFIG_ARCH_LUBBOCK) || \ ++ defined(CONFIG_MACH_LOGICPD_PXA270) || \ ++ defined(CONFIG_MACH_MAINSTONE) || \ ++ defined(CONFIG_MACH_PCM027) ++#define NR_IRQS (IRQ_BOARD_END) ++#else ++#define NR_IRQS (IRQ_BOARD_START) ++#endif ++ ++/* ++ * Board specific IRQs. Define them here. ++ * Do not surround them with ifdefs. ++ */ ++#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) ++#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) ++#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) ++#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ ++#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3) ++#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4) ++#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5) ++#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ ++#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) ++ ++#define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) ++#define LPD270_USBC_IRQ LPD270_IRQ(2) ++#define LPD270_ETHERNET_IRQ LPD270_IRQ(3) ++#define LPD270_AC97_IRQ LPD270_IRQ(4) ++ ++#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) ++#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) ++#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) ++#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) ++#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3) ++#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4) ++#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5) ++#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6) ++#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7) ++#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9) ++#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10) ++#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11) ++#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13) ++#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) ++#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) ++ ++/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ ++#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) ++#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) ++#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) ++#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) ++ ++/* phyCORE-PXA270 (PCM027) Interrupts */ ++#define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) ++#define PCM027_BTDET_IRQ PCM027_IRQ(0) ++#define PCM027_FF_RI_IRQ PCM027_IRQ(1) ++#define PCM027_MMCDET_IRQ PCM027_IRQ(2) ++#define PCM027_PM_5V_IRQ PCM027_IRQ(3) ++ ++/* ITE8152 irqs */ ++/* add IT8152 IRQs beyond BOARD_END */ ++#ifdef CONFIG_PCI_HOST_ITE8152 ++#define IT8152_IRQ(x) (IRQ_GPIO(IRQ_BOARD_END) + 1 + (x)) ++ ++/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ ++#define IT8152_LD_IRQ_COUNT 9 ++#define IT8152_LP_IRQ_COUNT 16 ++#define IT8152_PD_IRQ_COUNT 15 ++ ++/* Priorities: */ ++#define IT8152_PD_IRQ(i) IT8152_IRQ(i) ++#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) ++#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) ++ ++#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1) ++ ++#undef NR_IRQS ++#define NR_IRQS (IT8152_LAST_IRQ+1) ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/littleton.h linux-2.6.25-rc4/include/asm-arm/arch/littleton.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/littleton.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/littleton.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,6 @@ ++#ifndef __ASM_ARCH_ZYLONITE_H ++#define __ASM_ARCH_ZYLONITE_H ++ ++#define LITTLETON_ETH_PHYS 0x30000000 ++ ++#endif /* __ASM_ARCH_ZYLONITE_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/lpd270.h linux-2.6.25-rc4/include/asm-arm/arch/lpd270.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/lpd270.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/lpd270.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,38 @@ ++/* ++ * include/asm-arm/arch-pxa/lpd270.h ++ * ++ * Author: Lennert Buytenhek ++ * Created: Feb 10, 2006 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_ARCH_LPD270_H ++#define __ASM_ARCH_LPD270_H ++ ++#define LPD270_CPLD_PHYS PXA_CS2_PHYS ++#define LPD270_CPLD_VIRT 0xf0000000 ++#define LPD270_CPLD_SIZE 0x00100000 ++ ++#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) ++ ++/* CPLD registers */ ++#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) ++#define LPD270_CONTROL LPD270_CPLD_REG(0x00) ++#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) ++#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) ++#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14) ++#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20) ++#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24) ++#define LPD270_EGPIO LPD270_CPLD_REG(0x30) ++#define LPD270_INT_MASK LPD270_CPLD_REG(0x40) ++#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50) ++ ++#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ ++#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ ++#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */ ++ ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/lubbock.h linux-2.6.25-rc4/include/asm-arm/arch/lubbock.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/lubbock.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/lubbock.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,40 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/lubbock.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Jun 15, 2001 ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS ++ ++#define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS ++#define LUBBOCK_FPGA_VIRT (0xf0000000) ++#define LUB_P2V(x) ((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT) ++#define LUB_V2P(x) ((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS) ++ ++#ifndef __ASSEMBLY__ ++# define __LUB_REG(x) (*((volatile unsigned long *)LUB_P2V(x))) ++#else ++# define __LUB_REG(x) LUB_P2V(x) ++#endif ++ ++/* FPGA register virtual addresses */ ++#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000) ++#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) ++#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040) ++#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050) ++#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060) ++#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) ++#define LUB_MISC_RD __LUB_REG(LUBBOCK_FPGA_PHYS + 0x090) ++#define LUB_IRQ_MASK_EN __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0) ++#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0) ++#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100) ++ ++#ifndef __ASSEMBLY__ ++extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/magician.h linux-2.6.25-rc4/include/asm-arm/arch/magician.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/magician.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/magician.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,111 @@ ++/* ++ * GPIO and IRQ definitions for HTC Magician PDA phones ++ * ++ * Copyright (c) 2007 Philipp Zabel ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#ifndef _MAGICIAN_H_ ++#define _MAGICIAN_H_ ++ ++#include <asm/arch/pxa-regs.h> ++ ++/* ++ * PXA GPIOs ++ */ ++ ++#define GPIO0_MAGICIAN_KEY_POWER 0 ++#define GPIO9_MAGICIAN_UNKNOWN 9 ++#define GPIO10_MAGICIAN_GSM_IRQ 10 ++#define GPIO11_MAGICIAN_GSM_OUT1 11 ++#define GPIO13_MAGICIAN_CPLD_IRQ 13 ++#define GPIO18_MAGICIAN_UNKNOWN 18 ++#define GPIO22_MAGICIAN_VIBRA_EN 22 ++#define GPIO26_MAGICIAN_GSM_POWER 26 ++#define GPIO27_MAGICIAN_USBC_PUEN 27 ++#define GPIO30_MAGICIAN_nCHARGE_EN 30 ++#define GPIO37_MAGICIAN_KEY_HANGUP 37 ++#define GPIO38_MAGICIAN_KEY_CONTACTS 38 ++#define GPIO40_MAGICIAN_GSM_OUT2 40 ++#define GPIO48_MAGICIAN_UNKNOWN 48 ++#define GPIO56_MAGICIAN_UNKNOWN 56 ++#define GPIO57_MAGICIAN_CAM_RESET 57 ++#define GPIO83_MAGICIAN_nIR_EN 83 ++#define GPIO86_MAGICIAN_GSM_RESET 86 ++#define GPIO87_MAGICIAN_GSM_SELECT 87 ++#define GPIO90_MAGICIAN_KEY_CALENDAR 90 ++#define GPIO91_MAGICIAN_KEY_CAMERA 91 ++#define GPIO93_MAGICIAN_KEY_UP 93 ++#define GPIO94_MAGICIAN_KEY_DOWN 94 ++#define GPIO95_MAGICIAN_KEY_LEFT 95 ++#define GPIO96_MAGICIAN_KEY_RIGHT 96 ++#define GPIO97_MAGICIAN_KEY_ENTER 97 ++#define GPIO98_MAGICIAN_KEY_RECORD 98 ++#define GPIO99_MAGICIAN_HEADPHONE_IN 99 ++#define GPIO100_MAGICIAN_KEY_VOL_UP 100 ++#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 ++#define GPIO102_MAGICIAN_KEY_PHONE 102 ++#define GPIO103_MAGICIAN_LED_KP 103 ++#define GPIO104_MAGICIAN_LCD_POWER_1 104 ++#define GPIO105_MAGICIAN_LCD_POWER_2 105 ++#define GPIO106_MAGICIAN_LCD_POWER_3 106 ++#define GPIO107_MAGICIAN_DS1WM_IRQ 107 ++#define GPIO108_MAGICIAN_GSM_READY 108 ++#define GPIO114_MAGICIAN_UNKNOWN 114 ++#define GPIO115_MAGICIAN_nPEN_IRQ 115 ++#define GPIO116_MAGICIAN_nCAM_EN 116 ++#define GPIO119_MAGICIAN_UNKNOWN 119 ++#define GPIO120_MAGICIAN_UNKNOWN 120 ++ ++/* ++ * PXA GPIO alternate function mode & direction ++ */ ++ ++#define GPIO0_MAGICIAN_KEY_POWER_MD (0 | GPIO_IN) ++#define GPIO9_MAGICIAN_UNKNOWN_MD (9 | GPIO_IN) ++#define GPIO10_MAGICIAN_GSM_IRQ_MD (10 | GPIO_IN) ++#define GPIO11_MAGICIAN_GSM_OUT1_MD (11 | GPIO_OUT) ++#define GPIO13_MAGICIAN_CPLD_IRQ_MD (13 | GPIO_IN) ++#define GPIO18_MAGICIAN_UNKNOWN_MD (18 | GPIO_OUT) ++#define GPIO22_MAGICIAN_VIBRA_EN_MD (22 | GPIO_OUT) ++#define GPIO26_MAGICIAN_GSM_POWER_MD (26 | GPIO_OUT) ++#define GPIO27_MAGICIAN_USBC_PUEN_MD (27 | GPIO_OUT) ++#define GPIO30_MAGICIAN_nCHARGE_EN_MD (30 | GPIO_OUT) ++#define GPIO37_MAGICIAN_KEY_HANGUP_MD (37 | GPIO_OUT) ++#define GPIO38_MAGICIAN_KEY_CONTACTS_MD (38 | GPIO_OUT) ++#define GPIO40_MAGICIAN_GSM_OUT2_MD (40 | GPIO_OUT) ++#define GPIO48_MAGICIAN_UNKNOWN_MD (48 | GPIO_OUT) ++#define GPIO56_MAGICIAN_UNKNOWN_MD (56 | GPIO_OUT) ++#define GPIO57_MAGICIAN_CAM_RESET_MD (57 | GPIO_OUT) ++#define GPIO83_MAGICIAN_nIR_EN_MD (83 | GPIO_OUT) ++#define GPIO86_MAGICIAN_GSM_RESET_MD (86 | GPIO_OUT) ++#define GPIO87_MAGICIAN_GSM_SELECT_MD (87 | GPIO_OUT) ++#define GPIO90_MAGICIAN_KEY_CALENDAR_MD (90 | GPIO_OUT) ++#define GPIO91_MAGICIAN_KEY_CAMERA_MD (91 | GPIO_OUT) ++#define GPIO93_MAGICIAN_KEY_UP_MD (93 | GPIO_IN) ++#define GPIO94_MAGICIAN_KEY_DOWN_MD (94 | GPIO_IN) ++#define GPIO95_MAGICIAN_KEY_LEFT_MD (95 | GPIO_IN) ++#define GPIO96_MAGICIAN_KEY_RIGHT_MD (96 | GPIO_IN) ++#define GPIO97_MAGICIAN_KEY_ENTER_MD (97 | GPIO_IN) ++#define GPIO98_MAGICIAN_KEY_RECORD_MD (98 | GPIO_IN) ++#define GPIO99_MAGICIAN_HEADPHONE_IN_MD (99 | GPIO_IN) ++#define GPIO100_MAGICIAN_KEY_VOL_UP_MD (100 | GPIO_IN) ++#define GPIO101_MAGICIAN_KEY_VOL_DOWN_MD (101 | GPIO_IN) ++#define GPIO102_MAGICIAN_KEY_PHONE_MD (102 | GPIO_IN) ++#define GPIO103_MAGICIAN_LED_KP_MD (103 | GPIO_OUT) ++#define GPIO104_MAGICIAN_LCD_POWER_1_MD (104 | GPIO_OUT) ++#define GPIO105_MAGICIAN_LCD_POWER_2_MD (105 | GPIO_OUT) ++#define GPIO106_MAGICIAN_LCD_POWER_3_MD (106 | GPIO_OUT) ++#define GPIO107_MAGICIAN_DS1WM_IRQ_MD (107 | GPIO_IN) ++#define GPIO108_MAGICIAN_GSM_READY_MD (108 | GPIO_IN) ++#define GPIO114_MAGICIAN_UNKNOWN_MD (114 | GPIO_OUT) ++#define GPIO115_MAGICIAN_nPEN_IRQ_MD (115 | GPIO_IN) ++#define GPIO116_MAGICIAN_nCAM_EN_MD (116 | GPIO_OUT) ++#define GPIO119_MAGICIAN_UNKNOWN_MD (119 | GPIO_OUT) ++#define GPIO120_MAGICIAN_UNKNOWN_MD (120 | GPIO_OUT) ++ ++#endif /* _MAGICIAN_H_ */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/mainstone.h linux-2.6.25-rc4/include/asm-arm/arch/mainstone.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/mainstone.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/mainstone.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,120 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/mainstone.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Nov 14, 2002 ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef ASM_ARCH_MAINSTONE_H ++#define ASM_ARCH_MAINSTONE_H ++ ++#define MST_ETH_PHYS PXA_CS4_PHYS ++ ++#define MST_FPGA_PHYS PXA_CS2_PHYS ++#define MST_FPGA_VIRT (0xf0000000) ++#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT) ++#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS) ++ ++#ifndef __ASSEMBLY__ ++# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x))) ++#else ++# define __MST_REG(x) MST_P2V(x) ++#endif ++ ++/* board level registers in the FPGA */ ++ ++#define MST_LEDDAT1 __MST_REG(0x08000010) ++#define MST_LEDDAT2 __MST_REG(0x08000014) ++#define MST_LEDCTRL __MST_REG(0x08000040) ++#define MST_GPSWR __MST_REG(0x08000060) ++#define MST_MSCWR1 __MST_REG(0x08000080) ++#define MST_MSCWR2 __MST_REG(0x08000084) ++#define MST_MSCWR3 __MST_REG(0x08000088) ++#define MST_MSCRD __MST_REG(0x08000090) ++#define MST_INTMSKENA __MST_REG(0x080000c0) ++#define MST_INTSETCLR __MST_REG(0x080000d0) ++#define MST_PCMCIA0 __MST_REG(0x080000e0) ++#define MST_PCMCIA1 __MST_REG(0x080000e4) ++ ++#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */ ++#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */ ++#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */ ++#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */ ++#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */ ++#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */ ++#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */ ++#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */ ++#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */ ++ ++#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */ ++#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */ ++#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */ ++#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */ ++#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */ ++ ++#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */ ++#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */ ++#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */ ++#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */ ++#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */ ++ ++#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */ ++#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */ ++#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */ ++#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */ ++#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */ ++#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */ ++#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */ ++ ++#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */ ++#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */ ++#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */ ++ ++#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */ ++#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */ ++#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */ ++#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */ ++#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */ ++#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */ ++#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */ ++#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */ ++#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */ ++#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */ ++ ++#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */ ++#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */ ++#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */ ++#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */ ++#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */ ++#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */ ++#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */ ++#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */ ++#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */ ++#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ ++#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ ++#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */ ++#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */ ++#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */ ++ ++#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */ ++#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */ ++#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */ ++#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */ ++#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */ ++#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */ ++#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */ ++#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */ ++ ++#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */ ++#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/ ++#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */ ++#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */ ++#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */ ++#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/memory.h linux-2.6.25-rc4/include/asm-arm/arch/memory.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/memory.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/memory.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,52 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/memory.h ++ * ++ * Author: Nicolas Pitre ++ * Copyright: (C) 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_ARCH_MEMORY_H ++#define __ASM_ARCH_MEMORY_H ++ ++/* ++ * Physical DRAM offset. ++ */ ++#define PHYS_OFFSET UL(0xa0000000) ++ ++/* ++ * Virtual view <-> DMA view memory address translations ++ * virt_to_bus: Used to translate the virtual address to an ++ * address suitable to be passed to set_dma_addr ++ * bus_to_virt: Used to convert an address for DMA operations ++ * to an address that the kernel can use. ++ */ ++#define __virt_to_bus(x) __virt_to_phys(x) ++#define __bus_to_virt(x) __phys_to_virt(x) ++ ++/* ++ * The nodes are matched with the physical SDRAM banks as follows: ++ * ++ * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff ++ * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff ++ * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff ++ * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff ++ * ++ * This needs a node mem size of 26 bits. ++ */ ++#define NODE_MEM_SIZE_BITS 26 ++ ++#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) ++void cmx270_pci_adjust_zones(int node, unsigned long *size, ++ unsigned long *holes); ++ ++#define arch_adjust_zones(node, size, holes) \ ++ cmx270_pci_adjust_zones(node, size, holes) ++ ++#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) ++#endif ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/mfp.h linux-2.6.25-rc4/include/asm-arm/arch/mfp.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/mfp.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/mfp.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,311 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/mfp.h ++ * ++ * Multi-Function Pin Definitions ++ * ++ * Copyright (C) 2007 Marvell International Ltd. ++ * ++ * 2007-8-21: eric miao <eric.miao@marvell.com> ++ * initial version ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_ARCH_MFP_H ++#define __ASM_ARCH_MFP_H ++ ++#define mfp_to_gpio(m) ((m) % 128) ++ ++/* list of all the configurable MFP pins */ ++enum { ++ MFP_PIN_INVALID = -1, ++ ++ MFP_PIN_GPIO0 = 0, ++ MFP_PIN_GPIO1, ++ MFP_PIN_GPIO2, ++ MFP_PIN_GPIO3, ++ MFP_PIN_GPIO4, ++ MFP_PIN_GPIO5, ++ MFP_PIN_GPIO6, ++ MFP_PIN_GPIO7, ++ MFP_PIN_GPIO8, ++ MFP_PIN_GPIO9, ++ MFP_PIN_GPIO10, ++ MFP_PIN_GPIO11, ++ MFP_PIN_GPIO12, ++ MFP_PIN_GPIO13, ++ MFP_PIN_GPIO14, ++ MFP_PIN_GPIO15, ++ MFP_PIN_GPIO16, ++ MFP_PIN_GPIO17, ++ MFP_PIN_GPIO18, ++ MFP_PIN_GPIO19, ++ MFP_PIN_GPIO20, ++ MFP_PIN_GPIO21, ++ MFP_PIN_GPIO22, ++ MFP_PIN_GPIO23, ++ MFP_PIN_GPIO24, ++ MFP_PIN_GPIO25, ++ MFP_PIN_GPIO26, ++ MFP_PIN_GPIO27, ++ MFP_PIN_GPIO28, ++ MFP_PIN_GPIO29, ++ MFP_PIN_GPIO30, ++ MFP_PIN_GPIO31, ++ MFP_PIN_GPIO32, ++ MFP_PIN_GPIO33, ++ MFP_PIN_GPIO34, ++ MFP_PIN_GPIO35, ++ MFP_PIN_GPIO36, ++ MFP_PIN_GPIO37, ++ MFP_PIN_GPIO38, ++ MFP_PIN_GPIO39, ++ MFP_PIN_GPIO40, ++ MFP_PIN_GPIO41, ++ MFP_PIN_GPIO42, ++ MFP_PIN_GPIO43, ++ MFP_PIN_GPIO44, ++ MFP_PIN_GPIO45, ++ MFP_PIN_GPIO46, ++ MFP_PIN_GPIO47, ++ MFP_PIN_GPIO48, ++ MFP_PIN_GPIO49, ++ MFP_PIN_GPIO50, ++ MFP_PIN_GPIO51, ++ MFP_PIN_GPIO52, ++ MFP_PIN_GPIO53, ++ MFP_PIN_GPIO54, ++ MFP_PIN_GPIO55, ++ MFP_PIN_GPIO56, ++ MFP_PIN_GPIO57, ++ MFP_PIN_GPIO58, ++ MFP_PIN_GPIO59, ++ MFP_PIN_GPIO60, ++ MFP_PIN_GPIO61, ++ MFP_PIN_GPIO62, ++ MFP_PIN_GPIO63, ++ MFP_PIN_GPIO64, ++ MFP_PIN_GPIO65, ++ MFP_PIN_GPIO66, ++ MFP_PIN_GPIO67, ++ MFP_PIN_GPIO68, ++ MFP_PIN_GPIO69, ++ MFP_PIN_GPIO70, ++ MFP_PIN_GPIO71, ++ MFP_PIN_GPIO72, ++ MFP_PIN_GPIO73, ++ MFP_PIN_GPIO74, ++ MFP_PIN_GPIO75, ++ MFP_PIN_GPIO76, ++ MFP_PIN_GPIO77, ++ MFP_PIN_GPIO78, ++ MFP_PIN_GPIO79, ++ MFP_PIN_GPIO80, ++ MFP_PIN_GPIO81, ++ MFP_PIN_GPIO82, ++ MFP_PIN_GPIO83, ++ MFP_PIN_GPIO84, ++ MFP_PIN_GPIO85, ++ MFP_PIN_GPIO86, ++ MFP_PIN_GPIO87, ++ MFP_PIN_GPIO88, ++ MFP_PIN_GPIO89, ++ MFP_PIN_GPIO90, ++ MFP_PIN_GPIO91, ++ MFP_PIN_GPIO92, ++ MFP_PIN_GPIO93, ++ MFP_PIN_GPIO94, ++ MFP_PIN_GPIO95, ++ MFP_PIN_GPIO96, ++ MFP_PIN_GPIO97, ++ MFP_PIN_GPIO98, ++ MFP_PIN_GPIO99, ++ MFP_PIN_GPIO100, ++ MFP_PIN_GPIO101, ++ MFP_PIN_GPIO102, ++ MFP_PIN_GPIO103, ++ MFP_PIN_GPIO104, ++ MFP_PIN_GPIO105, ++ MFP_PIN_GPIO106, ++ MFP_PIN_GPIO107, ++ MFP_PIN_GPIO108, ++ MFP_PIN_GPIO109, ++ MFP_PIN_GPIO110, ++ MFP_PIN_GPIO111, ++ MFP_PIN_GPIO112, ++ MFP_PIN_GPIO113, ++ MFP_PIN_GPIO114, ++ MFP_PIN_GPIO115, ++ MFP_PIN_GPIO116, ++ MFP_PIN_GPIO117, ++ MFP_PIN_GPIO118, ++ MFP_PIN_GPIO119, ++ MFP_PIN_GPIO120, ++ MFP_PIN_GPIO121, ++ MFP_PIN_GPIO122, ++ MFP_PIN_GPIO123, ++ MFP_PIN_GPIO124, ++ MFP_PIN_GPIO125, ++ MFP_PIN_GPIO126, ++ MFP_PIN_GPIO127, ++ MFP_PIN_GPIO0_2, ++ MFP_PIN_GPIO1_2, ++ MFP_PIN_GPIO2_2, ++ MFP_PIN_GPIO3_2, ++ MFP_PIN_GPIO4_2, ++ MFP_PIN_GPIO5_2, ++ MFP_PIN_GPIO6_2, ++ MFP_PIN_GPIO7_2, ++ MFP_PIN_GPIO8_2, ++ MFP_PIN_GPIO9_2, ++ MFP_PIN_GPIO10_2, ++ MFP_PIN_GPIO11_2, ++ MFP_PIN_GPIO12_2, ++ MFP_PIN_GPIO13_2, ++ MFP_PIN_GPIO14_2, ++ MFP_PIN_GPIO15_2, ++ MFP_PIN_GPIO16_2, ++ MFP_PIN_GPIO17_2, ++ ++ MFP_PIN_ULPI_STP, ++ MFP_PIN_ULPI_NXT, ++ MFP_PIN_ULPI_DIR, ++ ++ MFP_PIN_nXCVREN, ++ MFP_PIN_DF_CLE_nOE, ++ MFP_PIN_DF_nADV1_ALE, ++ MFP_PIN_DF_SCLK_E, ++ MFP_PIN_DF_SCLK_S, ++ MFP_PIN_nBE0, ++ MFP_PIN_nBE1, ++ MFP_PIN_DF_nADV2_ALE, ++ MFP_PIN_DF_INT_RnB, ++ MFP_PIN_DF_nCS0, ++ MFP_PIN_DF_nCS1, ++ MFP_PIN_nLUA, ++ MFP_PIN_nLLA, ++ MFP_PIN_DF_nWE, ++ MFP_PIN_DF_ALE_nWE, ++ MFP_PIN_DF_nRE_nOE, ++ MFP_PIN_DF_ADDR0, ++ MFP_PIN_DF_ADDR1, ++ MFP_PIN_DF_ADDR2, ++ MFP_PIN_DF_ADDR3, ++ MFP_PIN_DF_IO0, ++ MFP_PIN_DF_IO1, ++ MFP_PIN_DF_IO2, ++ MFP_PIN_DF_IO3, ++ MFP_PIN_DF_IO4, ++ MFP_PIN_DF_IO5, ++ MFP_PIN_DF_IO6, ++ MFP_PIN_DF_IO7, ++ MFP_PIN_DF_IO8, ++ MFP_PIN_DF_IO9, ++ MFP_PIN_DF_IO10, ++ MFP_PIN_DF_IO11, ++ MFP_PIN_DF_IO12, ++ MFP_PIN_DF_IO13, ++ MFP_PIN_DF_IO14, ++ MFP_PIN_DF_IO15, ++ ++ MFP_PIN_MAX, ++}; ++ ++/* ++ * a possible MFP configuration is represented by a 32-bit integer ++ * ++ * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) ++ * bit 10..12 - Alternate Function Selection ++ * bit 13..15 - Drive Strength ++ * bit 16..18 - Low Power Mode State ++ * bit 19..20 - Low Power Mode Edge Detection ++ * bit 21..22 - Run Mode Pull State ++ * ++ * to facilitate the definition, the following macros are provided ++ * ++ * MFP_CFG_DEFAULT - default MFP configuration value, with ++ * alternate function = 0, ++ * drive strength = fast 3mA (MFP_DS03X) ++ * low power mode = default ++ * edge detection = none ++ * ++ * MFP_CFG - default MFPR value with alternate function ++ * MFP_CFG_DRV - default MFPR value with alternate function and ++ * pin drive strength ++ * MFP_CFG_LPM - default MFPR value with alternate function and ++ * low power mode ++ * MFP_CFG_X - default MFPR value with alternate function, ++ * pin drive strength and low power mode ++ */ ++ ++typedef unsigned long mfp_cfg_t; ++ ++#define MFP_PIN(x) ((x) & 0x3ff) ++ ++#define MFP_AF0 (0x0 << 10) ++#define MFP_AF1 (0x1 << 10) ++#define MFP_AF2 (0x2 << 10) ++#define MFP_AF3 (0x3 << 10) ++#define MFP_AF4 (0x4 << 10) ++#define MFP_AF5 (0x5 << 10) ++#define MFP_AF6 (0x6 << 10) ++#define MFP_AF7 (0x7 << 10) ++#define MFP_AF_MASK (0x7 << 10) ++#define MFP_AF(x) (((x) >> 10) & 0x7) ++ ++#define MFP_DS01X (0x0 << 13) ++#define MFP_DS02X (0x1 << 13) ++#define MFP_DS03X (0x2 << 13) ++#define MFP_DS04X (0x3 << 13) ++#define MFP_DS06X (0x4 << 13) ++#define MFP_DS08X (0x5 << 13) ++#define MFP_DS10X (0x6 << 13) ++#define MFP_DS13X (0x7 << 13) ++#define MFP_DS_MASK (0x7 << 13) ++#define MFP_DS(x) (((x) >> 13) & 0x7) ++ ++#define MFP_LPM_INPUT (0x0 << 16) ++#define MFP_LPM_DRIVE_LOW (0x1 << 16) ++#define MFP_LPM_DRIVE_HIGH (0x2 << 16) ++#define MFP_LPM_PULL_LOW (0x3 << 16) ++#define MFP_LPM_PULL_HIGH (0x4 << 16) ++#define MFP_LPM_FLOAT (0x5 << 16) ++#define MFP_LPM_STATE_MASK (0x7 << 16) ++#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) ++ ++#define MFP_LPM_EDGE_NONE (0x0 << 19) ++#define MFP_LPM_EDGE_RISE (0x1 << 19) ++#define MFP_LPM_EDGE_FALL (0x2 << 19) ++#define MFP_LPM_EDGE_BOTH (0x3 << 19) ++#define MFP_LPM_EDGE_MASK (0x3 << 19) ++#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) ++ ++#define MFP_PULL_NONE (0x0 << 21) ++#define MFP_PULL_LOW (0x1 << 21) ++#define MFP_PULL_HIGH (0x2 << 21) ++#define MFP_PULL_BOTH (0x3 << 21) ++#define MFP_PULL_MASK (0x3 << 21) ++#define MFP_PULL(x) (((x) >> 21) & 0x3) ++ ++#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\ ++ MFP_LPM_EDGE_NONE | MFP_PULL_NONE) ++ ++#define MFP_CFG(pin, af) \ ++ ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ ++ (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) ++ ++#define MFP_CFG_DRV(pin, af, drv) \ ++ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ ++ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) ++ ++#define MFP_CFG_LPM(pin, af, lpm) \ ++ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ ++ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) ++ ++#define MFP_CFG_X(pin, af, drv, lpm) \ ++ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ ++ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) ++ ++#endif /* __ASM_ARCH_MFP_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/mfp-pxa300.h linux-2.6.25-rc4/include/asm-arm/arch/mfp-pxa300.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/mfp-pxa300.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/mfp-pxa300.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,575 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/mfp-pxa300.h ++ * ++ * PXA300/PXA310 specific MFP configuration definitions ++ * ++ * Copyright (C) 2007 Marvell International Ltd. ++ * 2007-08-21: eric miao <eric.miao@marvell.com> ++ * initial version ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_ARCH_MFP_PXA300_H ++#define __ASM_ARCH_MFP_PXA300_H ++ ++#include <asm/arch/mfp.h> ++#include <asm/arch/mfp-pxa3xx.h> ++ ++/* GPIO */ ++#define GPIO46_GPIO MFP_CFG(GPIO46, AF1) ++#define GPIO49_GPIO MFP_CFG(GPIO49, AF3) ++#define GPIO50_GPIO MFP_CFG(GPIO50, AF2) ++#define GPIO51_GPIO MFP_CFG(GPIO51, AF3) ++#define GPIO52_GPIO MFP_CFG(GPIO52, AF3) ++#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) ++#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) ++#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) ++#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) ++#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) ++#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) ++ ++#ifdef CONFIG_CPU_PXA310 ++#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) ++#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) ++#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) ++#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) ++#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) ++#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) ++#endif ++ ++/* Chip Select */ ++#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) ++ ++/* AC97 */ ++#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1) ++#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1) ++#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1) ++#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1) ++#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1) ++#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3) ++#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2) ++#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3) ++#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2) ++#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1) ++#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1) ++ ++/* I2C */ ++#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH) ++#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH) ++ ++/* QCI */ ++#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X) ++#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X) ++#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X) ++#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X) ++#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X) ++#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X) ++#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X) ++#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) ++#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) ++#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) ++#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) ++#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) ++#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) ++#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) ++ ++/* KEYPAD */ ++#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) ++#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT) ++#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT) ++#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT) ++#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT) ++#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT) ++#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT) ++#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT) ++#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT) ++#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT) ++#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT) ++#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT) ++#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT) ++#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT) ++#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT) ++#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT) ++#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT) ++#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT) ++#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT) ++#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT) ++#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT) ++#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT) ++#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT) ++#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT) ++#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) ++#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) ++#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) ++#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) ++#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT) ++#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) ++#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT) ++#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) ++#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) ++#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) ++#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT) ++ ++#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT) ++#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT) ++#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT) ++#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT) ++#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT) ++#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT) ++#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT) ++#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT) ++#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT) ++#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT) ++#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT) ++#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT) ++#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT) ++#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT) ++#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT) ++#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT) ++#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) ++#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT) ++#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT) ++ ++#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) ++#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH) ++#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH) ++#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) ++#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH) ++#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH) ++#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH) ++#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH) ++#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH) ++#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) ++#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) ++#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH) ++#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH) ++#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH) ++#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH) ++#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) ++#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) ++#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) ++#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) ++#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) ++#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH) ++#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) ++#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH) ++#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH) ++ ++/* LCD */ ++#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X) ++#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X) ++#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X) ++#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X) ++#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X) ++#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X) ++#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X) ++#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X) ++#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X) ++#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X) ++#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X) ++#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X) ++#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X) ++#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X) ++#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X) ++#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X) ++#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X) ++#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X) ++#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) ++#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) ++#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) ++#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X) ++#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) ++#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) ++ ++#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X) ++#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X) ++#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X) ++ ++/* Mini-LCD */ ++#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X) ++#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X) ++#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X) ++#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X) ++#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X) ++#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X) ++#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X) ++#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X) ++#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X) ++#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X) ++#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X) ++#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X) ++#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X) ++#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X) ++#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X) ++#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X) ++#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X) ++#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X) ++#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X) ++#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X) ++ ++/* MMC1 */ ++#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) ++#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) ++#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH) ++#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH) ++#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH) ++#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH) ++#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) ++#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) ++ ++/* MMC2 */ ++#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH) ++#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH) ++#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH) ++#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH) ++#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH) ++#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH) ++#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) ++#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) ++#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) ++#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) ++#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH) ++#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH) ++ ++/* SSP1 */ ++#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1) ++#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1) ++#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6) ++#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2) ++#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5) ++#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5) ++#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1) ++#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1) ++#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7) ++#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2) ++#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2) ++#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7) ++#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5) ++#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4) ++#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5) ++#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6) ++#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1) ++#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6) ++#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6) ++#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1) ++ ++/* SSP2 */ ++#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2) ++#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2) ++#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2) ++#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2) ++#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2) ++#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6) ++#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6) ++#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2) ++#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2) ++#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2) ++#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7) ++#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5) ++#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4) ++#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2) ++#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5) ++#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5) ++#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2) ++#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7) ++#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6) ++#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4) ++#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2) ++#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2) ++#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4) ++#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7) ++ ++/* SSP3 */ ++#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW) ++#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT) ++#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW) ++#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT) ++#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW) ++#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT) ++#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW) ++#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT) ++#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW) ++#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT) ++#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW) ++#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) ++ ++/* SSP4 */ ++#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) ++#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) ++#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH) ++#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH) ++#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH) ++#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH) ++ ++/* UART1 */ ++#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT) ++#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT) ++#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT) ++#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT) ++#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT) ++#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT) ++ ++#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT) ++#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT) ++#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT) ++#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT) ++#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT) ++#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) ++ ++#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT) ++#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT) ++#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT) ++#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT) ++#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT) ++#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT) ++ ++#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT) ++#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT) ++#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT) ++#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT) ++#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT) ++#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT) ++ ++#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT) ++#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT) ++#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT) ++ ++#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT) ++#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT) ++#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT) ++ ++#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) ++#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT) ++#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT) ++#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT) ++#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT) ++#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT) ++#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT) ++#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT) ++ ++#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT) ++#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) ++#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT) ++#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT) ++#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT) ++#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT) ++#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT) ++ ++/* UART2 */ ++#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT) ++#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT) ++#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT) ++#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT) ++ ++#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT) ++#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT) ++#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT) ++#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT) ++ ++#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT) ++#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT) ++#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT) ++#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT) ++ ++#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT) ++#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT) ++#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT) ++#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT) ++ ++/* UART3 */ ++#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT) ++#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT) ++#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT) ++#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT) ++ ++#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT) ++#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT) ++#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT) ++#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT) ++ ++#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT) ++#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT) ++#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT) ++#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT) ++#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT) ++#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) ++ ++#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT) ++#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT) ++#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT) ++#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT) ++#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT) ++#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) ++ ++/* USB Host */ ++#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1) ++#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1) ++ ++/* USB P3 */ ++#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2) ++#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2) ++#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2) ++#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2) ++#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2) ++#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2) ++ ++/* PWM */ ++#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1) ++#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1) ++#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1) ++#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1) ++ ++/* CIR */ ++#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5) ++#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3) ++ ++#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5) ++#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2) ++ ++#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1) ++#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7) ++#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6) ++#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6) ++#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6) ++#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6) ++#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2) ++#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3) ++#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7) ++#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6) ++ ++#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1) ++ ++#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1) ++#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1) ++#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1) ++#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1) ++ ++#define GPIO9_SCIO MFP_CFG(GPIO9, AF1) ++#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4) ++#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1) ++ ++/* ++ * PXA300 specific MFP configurations ++ */ ++#ifdef CONFIG_CPU_PXA300 ++#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2) ++#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3) ++#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4) ++#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4) ++#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5) ++#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2) ++#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2) ++#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2) ++#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2) ++#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2) ++#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2) ++#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2) ++ ++/* U2D UTMI */ ++#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1) ++#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3) ++#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1) ++#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5) ++#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3) ++#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2) ++#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5) ++#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3) ++#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2) ++#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1) ++#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5) ++#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1) ++#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3) ++#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3) ++#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3) ++#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4) ++#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3) ++#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3) ++#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3) ++#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4) ++#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2) ++#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7) ++#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4) ++#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2) ++#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3) ++#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5) ++#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1) ++#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2) ++#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3) ++#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3) ++#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2) ++#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3) ++#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5) ++#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3) ++#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5) ++#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3) ++#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4) ++#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3) ++#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7) ++#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5) ++#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3) ++#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5) ++#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3) ++#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3) ++#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3) ++#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3) ++#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3) ++#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3) ++#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3) ++#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3) ++#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3) ++#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3) ++#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3) ++#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3) ++#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3) ++#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3) ++#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3) ++#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3) ++#endif /* CONFIG_CPU_PXA300 */ ++ ++/* ++ * PXA310 specific MFP configurations ++ */ ++#ifdef CONFIG_CPU_PXA310 ++/* USB P2 */ ++#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1) ++#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1) ++#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1) ++#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1) ++#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1) ++#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1) ++ ++/* MMC1 */ ++#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3) ++#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3) ++ ++/* MMC3 */ ++#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2) ++#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2) ++#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1) ++#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1) ++#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1) ++#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1) ++#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1) ++#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1) ++ ++/* ULPI */ ++#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1) ++#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3) ++#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3) ++#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3) ++#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3) ++#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3) ++#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3) ++#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3) ++#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) ++#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) ++ ++#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) ++#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) ++#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) ++#endif /* CONFIG_CPU_PXA310 */ ++ ++#endif /* __ASM_ARCH_MFP_PXA300_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/mfp-pxa320.h linux-2.6.25-rc4/include/asm-arm/arch/mfp-pxa320.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/mfp-pxa320.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/mfp-pxa320.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,447 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/mfp-pxa320.h ++ * ++ * PXA320 specific MFP configuration definitions ++ * ++ * Copyright (C) 2007 Marvell International Ltd. ++ * 2007-08-21: eric miao <eric.miao@marvell.com> ++ * initial version ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_ARCH_MFP_PXA320_H ++#define __ASM_ARCH_MFP_PXA320_H ++ ++#include <asm/arch/mfp.h> ++#include <asm/arch/mfp-pxa3xx.h> ++ ++/* GPIO */ ++#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) ++#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) ++#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) ++#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) ++#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) ++ ++#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) ++#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) ++#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) ++#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) ++#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) ++#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) ++#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0) ++#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0) ++#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0) ++#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0) ++#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) ++ ++/* Chip Select */ ++#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) ++ ++/* AC97 */ ++#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1) ++#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1) ++#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1) ++#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1) ++#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1) ++#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2) ++#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2) ++#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3) ++#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3) ++#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1) ++#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1) ++ ++/* I2C */ ++#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH) ++#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH) ++ ++/* QCI */ ++#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X) ++#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X) ++#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X) ++#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X) ++#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X) ++#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X) ++#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X) ++#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X) ++#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X) ++#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X) ++#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X) ++#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X) ++#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X) ++#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X) ++ ++#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5) ++ ++#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3) ++#define GPIO0_DRQ MFP_CFG(GPIO0, AF2) ++#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5) ++#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6) ++#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1) ++#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4) ++#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1) ++#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1) ++ ++#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT) ++#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT) ++#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT) ++#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT) ++ ++#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT) ++#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT) ++#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT) ++#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT) ++#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT) ++#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT) ++#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT) ++#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT) ++ ++#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT) ++#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT) ++#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT) ++#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT) ++#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT) ++#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT) ++#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT) ++#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT) ++ ++#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT) ++#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT) ++ ++#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) ++#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) ++#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) ++#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) ++#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) ++#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) ++#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) ++#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) ++ ++#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT) ++#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT) ++#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT) ++#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT) ++#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT) ++#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT) ++#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT) ++#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT) ++ ++#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH) ++#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH) ++#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) ++#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) ++#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) ++#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH) ++ ++#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) ++#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) ++#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) ++#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) ++#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) ++#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH) ++#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH) ++#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) ++ ++/* LCD */ ++#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X) ++#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X) ++#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X) ++#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X) ++#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X) ++#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X) ++#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X) ++#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X) ++#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X) ++#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X) ++#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X) ++#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X) ++#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X) ++#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X) ++#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X) ++#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X) ++#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X) ++#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X) ++#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X) ++#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X) ++#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X) ++#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X) ++#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X) ++#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X) ++#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X) ++#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X) ++ ++#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X) ++#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X) ++#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X) ++#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X) ++#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X) ++#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X) ++#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X) ++#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X) ++#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X) ++#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X) ++#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X) ++#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X) ++#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X) ++#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X) ++#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X) ++#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X) ++#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X) ++#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X) ++#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X) ++#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X) ++#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X) ++#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X) ++#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X) ++#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X) ++ ++/* MMC1 */ ++#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH) ++#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH) ++#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH) ++#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH) ++#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH) ++#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) ++#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) ++#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) ++#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) ++#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH) ++#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH) ++#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH) ++#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH) ++ ++#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH) ++#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH) ++#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH) ++#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH) ++#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) ++#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) ++ ++#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH) ++#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH) ++#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH) ++#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH) ++#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH) ++#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH) ++#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH) ++#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH) ++#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH) ++#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) ++#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH) ++#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) ++ ++/* 1-Wire */ ++#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT) ++#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) ++ ++/* SSP1 */ ++#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1) ++#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1) ++#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1) ++#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1) ++#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6) ++#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1) ++#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1) ++#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6) ++ ++/* SSP2 */ ++#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2) ++#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2) ++#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2) ++#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2) ++#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2) ++#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5) ++#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2) ++#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2) ++#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5) ++ ++#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT) ++#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW) ++#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT) ++#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW) ++#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT) ++#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW) ++#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT) ++#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW) ++#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT) ++#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW) ++#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT) ++#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW) ++ ++#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH) ++#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH) ++#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH) ++#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH) ++#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) ++#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) ++#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH) ++ ++/* UART1 */ ++#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT) ++#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT) ++#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT) ++#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT) ++#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT) ++#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT) ++#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT) ++#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT) ++#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT) ++#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT) ++#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT) ++#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT) ++#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT) ++#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT) ++#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT) ++#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT) ++#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT) ++#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT) ++#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT) ++#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT) ++#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT) ++#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT) ++#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT) ++#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT) ++#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT) ++#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT) ++#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT) ++#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT) ++ ++/* UART2 */ ++#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT) ++#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT) ++#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT) ++#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT) ++#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) ++#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) ++#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT) ++#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT) ++ ++/* UART3 */ ++#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT) ++#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT) ++#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT) ++#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT) ++#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT) ++#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT) ++#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT) ++#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) ++#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) ++#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT) ++#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT) ++#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) ++#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT) ++#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT) ++#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT) ++#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT) ++#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT) ++#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT) ++#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT) ++#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT) ++ ++ ++/* USB 2.0 UTMI */ ++#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1) ++#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3) ++#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1) ++#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5) ++#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3) ++#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2) ++#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5) ++#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3) ++#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1) ++#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5) ++#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1) ++#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3) ++#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3) ++#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3) ++#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4) ++#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3) ++#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3) ++#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3) ++ ++#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3) ++#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3) ++#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3) ++#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3) ++#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3) ++#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3) ++#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3) ++#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3) ++ ++#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3) ++#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3) ++#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3) ++#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3) ++#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3) ++#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3) ++#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3) ++#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3) ++ ++#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4) ++#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2) ++#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7) ++ ++#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4) ++#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2) ++#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4) ++#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5) ++ ++#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1) ++#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2) ++#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3) ++ ++#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3) ++#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2) ++#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3) ++ ++#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5) ++#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3) ++#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7) ++#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5) ++ ++#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4) ++#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5) ++#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7) ++ ++#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5) ++#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3) ++#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5) ++ ++/* USB Host 1.1 */ ++#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1) ++#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1) ++ ++/* USB P2 */ ++#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2) ++#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4) ++#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4) ++#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2) ++#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2) ++#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2) ++#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2) ++#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2) ++#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2) ++#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2) ++ ++/* USB P3 */ ++#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2) ++#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2) ++#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2) ++#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2) ++#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2) ++#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2) ++ ++#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6) ++#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6) ++ ++#define GPIO2_RDY MFP_CFG(GPIO2, AF1) ++#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3) ++ ++#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1) ++#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1) ++#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1) ++#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1) ++ ++#endif /* __ASM_ARCH_MFP_PXA320_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/mfp-pxa3xx.h linux-2.6.25-rc4/include/asm-arm/arch/mfp-pxa3xx.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/mfp-pxa3xx.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/mfp-pxa3xx.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,252 @@ ++#ifndef __ASM_ARCH_MFP_PXA3XX_H ++#define __ASM_ARCH_MFP_PXA3XX_H ++ ++#define MFPR_BASE (0x40e10000) ++#define MFPR_SIZE (PAGE_SIZE) ++ ++/* MFPR register bit definitions */ ++#define MFPR_PULL_SEL (0x1 << 15) ++#define MFPR_PULLUP_EN (0x1 << 14) ++#define MFPR_PULLDOWN_EN (0x1 << 13) ++#define MFPR_SLEEP_SEL (0x1 << 9) ++#define MFPR_SLEEP_OE_N (0x1 << 7) ++#define MFPR_EDGE_CLEAR (0x1 << 6) ++#define MFPR_EDGE_FALL_EN (0x1 << 5) ++#define MFPR_EDGE_RISE_EN (0x1 << 4) ++ ++#define MFPR_SLEEP_DATA(x) ((x) << 8) ++#define MFPR_DRIVE(x) (((x) & 0x7) << 10) ++#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) ++ ++#define MFPR_EDGE_NONE (0) ++#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) ++#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) ++#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) ++ ++/* ++ * Table that determines the low power modes outputs, with actual settings ++ * used in parentheses for don't-care values. Except for the float output, ++ * the configured driven and pulled levels match, so if there is a need for ++ * non-LPM pulled output, the same configuration could probably be used. ++ * ++ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel ++ * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) ++ * ++ * Input 0 X(0) X(0) X(0) 0 ++ * Drive 0 0 0 0 X(1) 0 ++ * Drive 1 0 1 X(1) 0 0 ++ * Pull hi (1) 1 X(1) 1 0 0 ++ * Pull lo (0) 1 X(0) 0 1 0 ++ * Z (float) 1 X(0) 0 0 0 ++ */ ++#define MFPR_LPM_INPUT (0) ++#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) ++#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) ++#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) ++#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) ++#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) ++#define MFPR_LPM_MASK (0xe080) ++ ++/* ++ * The pullup and pulldown state of the MFP pin at run mode is by default ++ * determined by the selected alternate function. In case that some buggy ++ * devices need to override this default behavior, the definitions below ++ * indicates the setting of corresponding MFPR bits ++ * ++ * Definition pull_sel pullup_en pulldown_en ++ * MFPR_PULL_NONE 0 0 0 ++ * MFPR_PULL_LOW 1 0 1 ++ * MFPR_PULL_HIGH 1 1 0 ++ * MFPR_PULL_BOTH 1 1 1 ++ */ ++#define MFPR_PULL_NONE (0) ++#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) ++#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) ++#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) ++ ++/* PXA3xx common MFP configurations - processor specific ones defined ++ * in mfp-pxa300.h and mfp-pxa320.h ++ */ ++#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) ++#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) ++#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) ++#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) ++#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) ++#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) ++#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) ++#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) ++#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) ++#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) ++#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) ++#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) ++#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) ++#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) ++#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) ++#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) ++#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) ++#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) ++#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) ++#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) ++#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) ++#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) ++#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) ++#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) ++#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) ++#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) ++#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) ++#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) ++#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) ++#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) ++#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) ++#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) ++#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) ++#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) ++#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) ++#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) ++#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) ++#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) ++#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) ++#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) ++#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) ++#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) ++#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) ++#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) ++#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) ++#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) ++ ++#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) ++#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) ++ ++#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) ++#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) ++#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) ++ ++#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) ++ ++#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) ++#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) ++#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) ++#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) ++#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) ++#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) ++#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) ++#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) ++#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) ++#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) ++#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) ++#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) ++#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) ++#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) ++#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) ++#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) ++#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) ++#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) ++#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) ++#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) ++#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) ++#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) ++#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) ++#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) ++#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) ++#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) ++#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) ++#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) ++#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) ++#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) ++#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) ++#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) ++#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) ++#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) ++#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) ++#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) ++#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) ++#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) ++#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) ++#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) ++#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) ++#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) ++#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) ++#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) ++#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) ++#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) ++#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) ++#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) ++#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) ++#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) ++#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) ++#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) ++#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) ++#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) ++#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) ++#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) ++#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) ++#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) ++#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) ++#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) ++#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) ++#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) ++#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) ++#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) ++#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) ++ ++#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) ++#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) ++#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) ++#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) ++#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) ++#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) ++#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) ++ ++/* ++ * each MFP pin will have a MFPR register, since the offset of the ++ * register varies between processors, the processor specific code ++ * should initialize the pin offsets by pxa3xx_mfp_init_addr() ++ * ++ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" ++ * structure, which represents a range of MFP pins from "start" to ++ * "end", with the offset begining at "offset", to define a single ++ * pin, let "end" = -1 ++ * ++ * use ++ * ++ * MFP_ADDR_X() to define a range of pins ++ * MFP_ADDR() to define a single pin ++ * MFP_ADDR_END to signal the end of pin offset definitions ++ */ ++struct pxa3xx_mfp_addr_map { ++ unsigned int start; ++ unsigned int end; ++ unsigned long offset; ++}; ++ ++#define MFP_ADDR_X(start, end, offset) \ ++ { MFP_PIN_##start, MFP_PIN_##end, offset } ++ ++#define MFP_ADDR(pin, offset) \ ++ { MFP_PIN_##pin, -1, offset } ++ ++#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } ++ ++/* ++ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access ++ * to the MFPR register ++ */ ++unsigned long pxa3xx_mfp_read(int mfp); ++void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); ++ ++/* ++ * pxa3xx_mfp_config - configure the MFPR registers ++ * ++ * used by board specific initialization code ++ */ ++void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); ++ ++/* ++ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin ++ * index and MFPR register offset ++ * ++ * used by processor specific code ++ */ ++void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); ++void __init pxa3xx_init_mfp(void); ++#endif /* __ASM_ARCH_MFP_PXA3XX_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/mmc.h linux-2.6.25-rc4/include/asm-arm/arch/mmc.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/mmc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/mmc.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,23 @@ ++#ifndef ASMARM_ARCH_MMC_H ++#define ASMARM_ARCH_MMC_H ++ ++#include <linux/mmc/host.h> ++#include <linux/interrupt.h> ++ ++struct device; ++struct mmc_host; ++ ++struct pxamci_platform_data { ++ unsigned int ocr_mask; /* available voltages */ ++ unsigned long detect_delay; /* delay in jiffies before detecting cards after interrupt */ ++ int (*init)(struct device *, irq_handler_t , void *); ++ int (*get_ro)(struct device *); ++ void (*setpower)(struct device *, unsigned int); ++ void (*exit)(struct device *, void *); ++}; ++ ++extern void pxa_set_mci_info(struct pxamci_platform_data *info); ++extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); ++extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/mtd-xip.h linux-2.6.25-rc4/include/asm-arm/arch/mtd-xip.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/mtd-xip.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/mtd-xip.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,37 @@ ++/* ++ * MTD primitives for XIP support. Architecture specific functions ++ * ++ * Do not include this file directly. It's included from linux/mtd/xip.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Nov 2, 2004 ++ * Copyright: (C) 2004 MontaVista Software, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ ++ */ ++ ++#ifndef __ARCH_PXA_MTD_XIP_H__ ++#define __ARCH_PXA_MTD_XIP_H__ ++ ++#include <asm/arch/pxa-regs.h> ++ ++#define xip_irqpending() (ICIP & ICMR) ++ ++/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ ++#define xip_currtime() (OSCR) ++#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) ++ ++/* ++ * xip_cpu_idle() is used when waiting for a delay equal or larger than ++ * the system timer tick period. This should put the CPU into idle mode ++ * to save power and to be woken up only when some interrupts are pending. ++ * As above, this should not rely upon standard kernel code. ++ */ ++ ++#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) ++ ++#endif /* __ARCH_PXA_MTD_XIP_H__ */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/ohci.h linux-2.6.25-rc4/include/asm-arm/arch/ohci.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/ohci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/ohci.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,20 @@ ++#ifndef ASMARM_ARCH_OHCI_H ++#define ASMARM_ARCH_OHCI_H ++ ++struct device; ++ ++struct pxaohci_platform_data { ++ int (*init)(struct device *); ++ void (*exit)(struct device *); ++ ++ int port_mode; ++#define PMM_NPS_MODE 1 ++#define PMM_GLOBAL_MODE 2 ++#define PMM_PERPORT_MODE 3 ++ ++ int power_budget; ++}; ++ ++extern void pxa_set_ohci_info(struct pxaohci_platform_data *info); ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pcm027.h linux-2.6.25-rc4/include/asm-arm/arch/pcm027.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pcm027.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pcm027.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,75 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/pcm027.h ++ * ++ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> ++ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* ++ * Definitions of CPU card resources only ++ */ ++ ++/* I2C RTC */ ++#define PCM027_RTC_IRQ_GPIO 0 ++#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) ++#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING ++#define ADR_PCM027_RTC 0x51 /* I2C address */ ++ ++/* I2C EEPROM */ ++#define ADR_PCM027_EEPROM 0x54 /* I2C address */ ++ ++/* Ethernet chip (SMSC91C111) */ ++#define PCM027_ETH_IRQ_GPIO 52 ++#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) ++#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING ++#define PCM027_ETH_PHYS PXA_CS5_PHYS ++#define PCM027_ETH_SIZE (1*1024*1024) ++ ++/* CAN controller SJA1000 (unsupported yet) */ ++#define PCM027_CAN_IRQ_GPIO 114 ++#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) ++#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING ++#define PCM027_CAN_PHYS 0x22000000 ++#define PCM027_CAN_SIZE 0x100 ++ ++/* SPI GPIO expander (unsupported yet) */ ++#define PCM027_EGPIO_IRQ_GPIO 27 ++#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) ++#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING ++#define PCM027_EGPIO_CS 24 ++/* ++ * TODO: Switch this pin from dedicated usage to GPIO if ++ * more than the MAX7301 device is connected to this SPI bus ++ */ ++#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD ++ ++/* Flash memory */ ++#define PCM027_FLASH_PHYS 0x00000000 ++#define PCM027_FLASH_SIZE 0x02000000 ++ ++/* onboard LEDs connected to GPIO */ ++#define PCM027_LED_CPU 90 ++#define PCM027_LED_HEARD_BEAT 91 ++ ++/* ++ * This CPU module needs a baseboard to work. After basic initializing ++ * its own devices, it calls baseboard's init function. ++ * TODO: Add your own basebaord init function and call it from ++ * inside pcm027_init(). This example here is for the developmen board. ++ * Refer pcm990-baseboard.c ++ */ ++extern void pcm990_baseboard_init(void); +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pcm990_baseboard.h linux-2.6.25-rc4/include/asm-arm/arch/pcm990_baseboard.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pcm990_baseboard.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pcm990_baseboard.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,275 @@ ++/* ++ * include/asm-arm/arch-pxa/pcm990_baseboard.h ++ * ++ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> ++ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <asm/arch/pcm027.h> ++ ++/* ++ * definitions relevant only when the PCM-990 ++ * development base board is in use ++ */ ++ ++/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ ++#define PCM990_CTRL_INT_IRQ_GPIO 9 ++#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) ++#define PCM990_CTRL_INT_IRQ_EDGE IRQT_RISING ++#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ ++#define PCM990_CTRL_BASE 0xea000000 ++#define PCM990_CTRL_SIZE (1*1024*1024) ++ ++#define PCM990_CTRL_PWR_IRQ_GPIO 14 ++#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) ++#define PCM990_CTRL_PWR_IRQ_EDGE IRQT_RISING ++ ++/* visible CPLD (U7) registers */ ++#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ ++#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */ ++#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */ ++#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */ ++ ++#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */ ++#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */ ++#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */ ++#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */ ++ ++#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */ ++#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */ ++#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */ ++#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */ ++ ++#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */ ++#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */ ++#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */ ++#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */ ++#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */ ++ ++#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */ ++#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */ ++ ++#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */ ++#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */ ++#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */ ++#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */ ++#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */ ++ ++#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */ ++#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */ ++#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */ ++#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */ ++#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */ ++ ++#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */ ++#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */ ++#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */ ++#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */ ++#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */ ++ ++#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */ ++#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */ ++#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */ ++#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */ ++#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */ ++ ++#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */ ++#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */ ++#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */ ++#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */ ++ ++#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */ ++#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */ ++#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */ ++ ++#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */ ++#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */ ++#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */ ++#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */ ++#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */ ++ ++#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE) ++#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS) ++ ++#ifndef __ASSEMBLY__ ++# define __PCM990_CTRL_REG(x) \ ++ (*((volatile unsigned char *)PCM990_CTRL_P2V(x))) ++#else ++# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x) ++#endif ++ ++#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) ++#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) ++#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0) ++#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1) ++#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2) ++#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) ++#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4) ++#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) ++#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) ++#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) ++#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8) ++#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9) ++#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10) ++#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11) ++ ++ ++/* ++ * IDE ++ */ ++#define PCM990_IDE_IRQ_GPIO 13 ++#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) ++#define PCM990_IDE_IRQ_EDGE IRQT_RISING ++#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ ++#define PCM990_IDE_PLD_BASE 0xee000000 ++#define PCM990_IDE_PLD_SIZE (1*1024*1024) ++ ++/* visible CPLD (U6) registers */ ++#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */ ++#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */ ++#define PCM990_IDE_STBY 0x0008 /* R System StandBy */ ++ ++#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */ ++#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */ ++#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */ ++#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */ ++ ++#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */ ++#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */ ++#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */ ++#define PCM990_IDE_RDY 0x0008 /* RDY */ ++ ++#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */ ++#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */ ++#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */ ++#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */ ++ ++#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */ ++#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */ ++#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */ ++#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */ ++ ++#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE) ++#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS) ++ ++#ifndef __ASSEMBLY__ ++# define __PCM990_IDE_PLD_REG(x) \ ++ (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x))) ++#else ++# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x) ++#endif ++ ++#define PCM990_IDE0 \ ++ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0) ++#define PCM990_IDE1 \ ++ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1) ++#define PCM990_IDE2 \ ++ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2) ++#define PCM990_IDE3 \ ++ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3) ++#define PCM990_IDE4 \ ++ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4) ++ ++/* ++ * Compact Flash ++ */ ++#define PCM990_CF_IRQ_GPIO 11 ++#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) ++#define PCM990_CF_IRQ_EDGE IRQT_RISING ++ ++#define PCM990_CF_CD_GPIO 12 ++#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) ++#define PCM990_CF_CD_EDGE IRQT_RISING ++ ++#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ ++#define PCM990_CF_PLD_BASE 0xef000000 ++#define PCM990_CF_PLD_SIZE (1*1024*1024) ++#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE) ++#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS) ++ ++/* visible CPLD (U6) registers */ ++#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */ ++#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */ ++#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */ ++#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */ ++#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */ ++ ++#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */ ++#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */ ++#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */ ++ ++#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */ ++#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */ ++#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */ ++#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */ ++ ++#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */ ++#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */ ++#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */ ++#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */ ++#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */ ++ ++#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */ ++#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */ ++#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */ ++#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */ ++#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */ ++ ++#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */ ++#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */ ++#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */ ++#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */ ++#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */ ++ ++#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */ ++#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */ ++#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */ ++ ++#ifndef __ASSEMBLY__ ++# define __PCM990_CF_PLD_REG(x) \ ++ (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x))) ++#else ++# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x) ++#endif ++ ++#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0) ++#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1) ++#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2) ++#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3) ++#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4) ++#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5) ++#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6) ++ ++/* ++ * Wolfson AC97 Touch ++ */ ++#define PCM990_AC97_IRQ_GPIO 10 ++#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) ++#define PCM990_AC97_IRQ_EDGE IRQT_RISING ++ ++/* ++ * MMC phyCORE ++ */ ++#define PCM990_MMC0_IRQ_GPIO 9 ++#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) ++#define PCM990_MMC0_IRQ_EDGE IRQT_FALLING ++ ++/* ++ * USB phyCore ++ */ ++#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN) ++#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT) +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pm.h linux-2.6.25-rc4/include/asm-arm/arch/pm.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pm.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pm.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,27 @@ ++/* ++ * Copyright (c) 2005 Richard Purdie ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/suspend.h> ++ ++struct pxa_cpu_pm_fns { ++ int save_size; ++ void (*save)(unsigned long *); ++ void (*restore)(unsigned long *); ++ int (*valid)(suspend_state_t state); ++ void (*enter)(suspend_state_t state); ++}; ++ ++extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; ++ ++/* sleep.S */ ++extern void pxa25x_cpu_suspend(unsigned int); ++extern void pxa27x_cpu_suspend(unsigned int); ++extern void pxa_cpu_resume(void); ++ ++extern int pxa_pm_enter(suspend_state_t state); +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/poodle.h linux-2.6.25-rc4/include/asm-arm/arch/poodle.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/poodle.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/poodle.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,75 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/poodle.h ++ * ++ * May be copied or modified under the terms of the GNU General Public ++ * License. See linux/COPYING for more information. ++ * ++ * Based on: ++ * linux/include/asm-arm/arch-sa1100/collie.h ++ * ++ * ChangeLog: ++ * 04-06-2001 Lineo Japan, Inc. ++ * 04-16-2001 SHARP Corporation ++ * Update to 2.6 John Lenz ++ */ ++#ifndef __ASM_ARCH_POODLE_H ++#define __ASM_ARCH_POODLE_H 1 ++ ++/* ++ * GPIOs ++ */ ++/* PXA GPIOs */ ++#define POODLE_GPIO_ON_KEY (0) ++#define POODLE_GPIO_AC_IN (1) ++#define POODLE_GPIO_CO 16 ++#define POODLE_GPIO_TP_INT (5) ++#define POODLE_GPIO_WAKEUP (11) /* change battery */ ++#define POODLE_GPIO_GA_INT (10) ++#define POODLE_GPIO_IR_ON (22) ++#define POODLE_GPIO_HP_IN (4) ++#define POODLE_GPIO_CF_IRQ (17) ++#define POODLE_GPIO_CF_CD (14) ++#define POODLE_GPIO_CF_STSCHG (14) ++#define POODLE_GPIO_SD_PWR (33) ++#define POODLE_GPIO_SD_PWR1 (3) ++#define POODLE_GPIO_nSD_CLK (6) ++#define POODLE_GPIO_nSD_WP (7) ++#define POODLE_GPIO_nSD_INT (8) ++#define POODLE_GPIO_nSD_DETECT (9) ++#define POODLE_GPIO_MAIN_BAT_LOW (13) ++#define POODLE_GPIO_BAT_COVER (13) ++#define POODLE_GPIO_USB_PULLUP (20) ++#define POODLE_GPIO_ADC_TEMP_ON (21) ++#define POODLE_GPIO_BYPASS_ON (36) ++#define POODLE_GPIO_CHRG_ON (38) ++#define POODLE_GPIO_CHRG_FULL (16) ++#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ ++ ++/* PXA GPIOs */ ++#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) ++#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1) ++#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4) ++#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16) ++#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5) ++#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11) ++#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10) ++#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) ++#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14) ++#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8) ++#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) ++#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13) ++ ++/* SCOOP GPIOs */ ++#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11 ++#define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13 ++#define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18 ++#define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20 ++#define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21 ++#define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22 ++ ++#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) ++#define POODLE_SCOOP_IO_OUT ( 0 ) ++ ++extern struct platform_device poodle_locomo_device; ++ ++#endif /* __ASM_ARCH_POODLE_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa27x_keypad.h linux-2.6.25-rc4/include/asm-arm/arch/pxa27x_keypad.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa27x_keypad.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pxa27x_keypad.h 2008-03-08 16:22:35.000000000 +0100 +@@ -0,0 +1,58 @@ ++#ifndef __ASM_ARCH_PXA27x_KEYPAD_H ++#define __ASM_ARCH_PXA27x_KEYPAD_H ++ ++#include <linux/input.h> ++ ++#define MAX_MATRIX_KEY_ROWS (8) ++#define MAX_MATRIX_KEY_COLS (8) ++ ++/* pxa3xx keypad platform specific parameters ++ * ++ * NOTE: ++ * 1. direct_key_num indicates the number of keys in the direct keypad ++ * _plus_ the number of rotary-encoder sensor inputs, this can be ++ * left as 0 if only rotary encoders are enabled, the driver will ++ * automatically calculate this ++ * ++ * 2. direct_key_map is the key code map for the direct keys, if rotary ++ * encoder(s) are enabled, direct key 0/1(2/3) will be ignored ++ * ++ * 3. rotary can be either interpreted as a relative input event (e.g. ++ * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) ++ * ++ * 4. matrix key and direct key will use the same debounce_interval by ++ * default, which should be sufficient in most cases ++ */ ++struct pxa27x_keypad_platform_data { ++ ++ /* code map for the matrix keys */ ++ unsigned int matrix_key_rows; ++ unsigned int matrix_key_cols; ++ unsigned int *matrix_key_map; ++ int matrix_key_map_size; ++ ++ /* direct keys */ ++ int direct_key_num; ++ unsigned int direct_key_map[8]; ++ ++ /* rotary encoders 0 */ ++ int enable_rotary0; ++ int rotary0_rel_code; ++ int rotary0_up_key; ++ int rotary0_down_key; ++ ++ /* rotary encoders 1 */ ++ int enable_rotary1; ++ int rotary1_rel_code; ++ int rotary1_up_key; ++ int rotary1_down_key; ++ ++ /* key debounce interval */ ++ unsigned int debounce_interval; ++}; ++ ++#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) ++ ++extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); ++ ++#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa2xx-regs.h linux-2.6.25-rc4/include/asm-arm/arch/pxa2xx-regs.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa2xx-regs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pxa2xx-regs.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,84 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/pxa2xx-regs.h ++ * ++ * Taken from pxa-regs.h by Russell King ++ * ++ * Author: Nicolas Pitre ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __PXA2XX_REGS_H ++#define __PXA2XX_REGS_H ++ ++/* ++ * Memory controller ++ */ ++ ++#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ ++#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ ++#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ ++#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ ++#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ ++#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ ++#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ ++#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ ++#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ ++#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ ++#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ ++#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ ++#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ ++#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ ++#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ ++#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ ++#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ ++ ++/* ++ * More handy macros for PCMCIA ++ * ++ * Arg is socket number ++ */ ++#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ ++#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ ++#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ ++ ++/* MECR register defines */ ++#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ ++#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ ++ ++#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ ++#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ ++#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ ++#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ ++#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ ++#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ ++#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ ++#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ ++#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ ++#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ ++#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ ++#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ ++#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ ++#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ ++ ++ ++#ifdef CONFIG_PXA27x ++ ++#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ ++ ++#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ ++#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ ++#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ ++#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ ++#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ ++#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ ++#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ ++#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ ++#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ ++ ++#endif ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa2xx_spi.h linux-2.6.25-rc4/include/asm-arm/arch/pxa2xx_spi.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa2xx_spi.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pxa2xx_spi.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,44 @@ ++/* ++ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#ifndef PXA2XX_SPI_H_ ++#define PXA2XX_SPI_H_ ++ ++#define PXA2XX_CS_ASSERT (0x01) ++#define PXA2XX_CS_DEASSERT (0x02) ++ ++/* device.platform_data for SSP controller devices */ ++struct pxa2xx_spi_master { ++ u32 clock_enable; ++ u16 num_chipselect; ++ u8 enable_dma; ++}; ++ ++/* spi_board_info.controller_data for SPI slave devices, ++ * copied to spi_device.platform_data ... mostly for dma tuning ++ */ ++struct pxa2xx_spi_chip { ++ u8 tx_threshold; ++ u8 rx_threshold; ++ u8 dma_burst_size; ++ u32 timeout; ++ u8 enable_loopback; ++ void (*cs_control)(u32 command); ++}; ++ ++#endif /*PXA2XX_SPI_H_*/ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa3xx-regs.h linux-2.6.25-rc4/include/asm-arm/arch/pxa3xx-regs.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa3xx-regs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pxa3xx-regs.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,174 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h ++ * ++ * PXA3xx specific register definitions ++ * ++ * Copyright (C) 2007 Marvell International Ltd. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_ARCH_PXA3XX_REGS_H ++#define __ASM_ARCH_PXA3XX_REGS_H ++/* ++ * Service Power Management Unit (MPMU) ++ */ ++#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ ++#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ ++#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ ++#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ ++#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ ++#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ ++#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ ++#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ ++#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ ++#define PCMD(x) __REG(0x40F50110 + ((x) << 2)) ++ ++/* ++ * Slave Power Managment Unit ++ */ ++#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ ++#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ ++#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */ ++#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */ ++#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */ ++#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */ ++#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */ ++#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */ ++#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */ ++#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */ ++#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */ ++#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */ ++#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */ ++#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */ ++ ++/* ++ * Application Subsystem Configuration bits. ++ */ ++#define ASCR_RDH (1 << 31) ++#define ASCR_D1S (1 << 2) ++#define ASCR_D2S (1 << 1) ++#define ASCR_D3S (1 << 0) ++ ++/* ++ * Application Reset Status bits. ++ */ ++#define ARSR_GPR (1 << 3) ++#define ARSR_LPMR (1 << 2) ++#define ARSR_WDT (1 << 1) ++#define ARSR_HWR (1 << 0) ++ ++/* ++ * Application Subsystem Wake-Up bits. ++ */ ++#define ADXER_WRTC (1 << 31) /* RTC */ ++#define ADXER_WOST (1 << 30) /* OS Timer */ ++#define ADXER_WTSI (1 << 29) /* Touchscreen */ ++#define ADXER_WUSBH (1 << 28) /* USB host */ ++#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */ ++#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/ ++#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */ ++#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */ ++#define ADXER_WKP (1 << 21) /* Keypad */ ++#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */ ++#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */ ++#define ADXER_WOTG (1 << 16) /* USBOTG input */ ++#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */ ++#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */ ++#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */ ++#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */ ++#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */ ++#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */ ++#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */ ++#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */ ++#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */ ++#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */ ++#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */ ++#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */ ++#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */ ++#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */ ++#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */ ++#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */ ++ ++/* ++ * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320. ++ */ ++#define ADXR_L2 (1 << 8) ++#define ADXR_R5 (1 << 5) ++#define ADXR_R4 (1 << 4) ++#define ADXR_R3 (1 << 3) ++#define ADXR_R2 (1 << 2) ++#define ADXR_R1 (1 << 1) ++#define ADXR_R0 (1 << 0) ++ ++/* ++ * Values for PWRMODE CP15 register ++ */ ++#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */ ++#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */ ++#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */ ++#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */ ++#define PXA3xx_PM_S0D0C1 0x01 ++ ++/* ++ * Application Subsystem Clock ++ */ ++#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ ++#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ ++#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ ++#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ ++#define CKENB __REG(0x41340010) /* B Clock Enable Register */ ++#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ ++ ++/* ++ * Clock Enable Bit ++ */ ++#define CKEN_LCD 1 /* < LCD Clock Enable */ ++#define CKEN_USBH 2 /* < USB host clock enable */ ++#define CKEN_CAMERA 3 /* < Camera interface clock enable */ ++#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ ++#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ ++#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ ++#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ ++#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ ++#define CKEN_BOOT 11 /* < Boot rom clock enable */ ++#define CKEN_MMC1 12 /* < MMC1 Clock enable */ ++#define CKEN_MMC2 13 /* < MMC2 clock enable */ ++#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ ++#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ ++#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ ++#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ ++#define CKEN_TPM 19 /* < TPM clock enable */ ++#define CKEN_UDC 20 /* < UDC clock enable */ ++#define CKEN_BTUART 21 /* < BTUART clock enable */ ++#define CKEN_FFUART 22 /* < FFUART clock enable */ ++#define CKEN_STUART 23 /* < STUART clock enable */ ++#define CKEN_AC97 24 /* < AC97 clock enable */ ++#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ ++#define CKEN_SSP1 26 /* < SSP1 clock enable */ ++#define CKEN_SSP2 27 /* < SSP2 clock enable */ ++#define CKEN_SSP3 28 /* < SSP3 clock enable */ ++#define CKEN_SSP4 29 /* < SSP4 clock enable */ ++#define CKEN_MSL0 30 /* < MSL0 clock enable */ ++#define CKEN_PWM0 32 /* < PWM[0] clock enable */ ++#define CKEN_PWM1 33 /* < PWM[1] clock enable */ ++#define CKEN_I2C 36 /* < I2C clock enable */ ++#define CKEN_INTC 38 /* < Interrupt controller clock enable */ ++#define CKEN_GPIO 39 /* < GPIO clock enable */ ++#define CKEN_1WIRE 40 /* < 1-wire clock enable */ ++#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ ++#define CKEN_MINI_IM 48 /* < Mini-IM */ ++#define CKEN_MINI_LCD 49 /* < Mini LCD */ ++ ++#if defined(CONFIG_CPU_PXA310) ++#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ ++#define CKEN_MVED 43 /* < MVED clock enable */ ++#endif ++ ++/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ ++#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */ ++#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */ ++ ++#endif /* __ASM_ARCH_PXA3XX_REGS_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pxafb.h linux-2.6.25-rc4/include/asm-arm/arch/pxafb.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pxafb.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pxafb.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,85 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/pxafb.h ++ * ++ * Support for the xscale frame buffer. ++ * ++ * Author: Jean-Frederic Clere ++ * Created: Sep 22, 2003 ++ * Copyright: jfclere@sinix.net ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/fb.h> ++ ++/* ++ * This structure describes the machine which we are running on. ++ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine ++ * of linux/drivers/video/pxafb.c ++ */ ++struct pxafb_mode_info { ++ u_long pixclock; ++ ++ u_short xres; ++ u_short yres; ++ ++ u_char bpp; ++ u_char hsync_len; ++ u_char left_margin; ++ u_char right_margin; ++ ++ u_char vsync_len; ++ u_char upper_margin; ++ u_char lower_margin; ++ u_char sync; ++ ++ u_int cmap_greyscale:1, ++ unused:31; ++}; ++ ++struct pxafb_mach_info { ++ struct pxafb_mode_info *modes; ++ unsigned int num_modes; ++ ++ u_int fixed_modes:1, ++ cmap_inverse:1, ++ cmap_static:1, ++ unused:29; ++ ++ /* The following should be defined in LCCR0 ++ * LCCR0_Act or LCCR0_Pas Active or Passive ++ * LCCR0_Sngl or LCCR0_Dual Single/Dual panel ++ * LCCR0_Mono or LCCR0_Color Mono/Color ++ * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode) ++ * LCCR0_DMADel(Tcpu) (optional) DMA request delay ++ * ++ * The following should not be defined in LCCR0: ++ * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM ++ * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB ++ */ ++ u_int lccr0; ++ /* The following should be defined in LCCR3 ++ * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity ++ * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type ++ * LCCR3_Acb(X) AB Bias pin frequency ++ * LCCR3_DPC (optional) Double Pixel Clock mode (untested) ++ * ++ * The following should not be defined in LCCR3 ++ * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp ++ */ ++ u_int lccr3; ++ /* The following should be defined in LCCR4 ++ * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2 ++ * ++ * All other bits in LCCR4 should be left alone. ++ */ ++ u_int lccr4; ++ void (*pxafb_backlight_power)(int); ++ void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); ++ ++}; ++void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); ++void set_pxa_fb_parent(struct device *parent_dev); ++unsigned long pxafb_get_hsync_time(struct device *dev); +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa-regs.h linux-2.6.25-rc4/include/asm-arm/arch/pxa-regs.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/pxa-regs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/pxa-regs.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,2150 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/pxa-regs.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Jun 15, 2001 ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __PXA_REGS_H ++#define __PXA_REGS_H ++ ++ ++/* ++ * PXA Chip selects ++ */ ++ ++#define PXA_CS0_PHYS 0x00000000 ++#define PXA_CS1_PHYS 0x04000000 ++#define PXA_CS2_PHYS 0x08000000 ++#define PXA_CS3_PHYS 0x0C000000 ++#define PXA_CS4_PHYS 0x10000000 ++#define PXA_CS5_PHYS 0x14000000 ++ ++ ++/* ++ * Personal Computer Memory Card International Association (PCMCIA) sockets ++ */ ++ ++#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ ++#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ ++#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ ++#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ ++#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ ++ ++#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ ++#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ ++#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ ++#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ ++ ++#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ ++#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ ++#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ ++#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ ++ ++#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ ++ (0x20000000 + (Nb)*PCMCIASp) ++#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ ++#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ ++ (_PCMCIA (Nb) + 2*PCMCIAPrtSp) ++#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ ++ (_PCMCIA (Nb) + 3*PCMCIAPrtSp) ++ ++#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ ++#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ ++#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ ++#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ ++ ++#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ ++#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ ++#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ ++#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ ++ ++ ++ ++/* ++ * DMA Controller ++ */ ++ ++#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ ++#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ ++#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ ++#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ ++#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ ++#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ ++#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ ++#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ ++#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ ++#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ ++#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ ++#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ ++#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ ++#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ ++#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ ++#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ ++ ++#define DCSR(x) __REG2(0x40000000, (x) << 2) ++ ++#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ ++#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ ++#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ ++#ifdef CONFIG_PXA27x ++#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ ++#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ ++#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ ++#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ ++#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ ++#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ ++#define DCSR_EORINTR (1 << 9) /* The end of Receive */ ++#endif ++#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ ++#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ ++#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ ++#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ ++#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ ++ ++#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ ++#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ ++ ++#define DRCMR(n) (*(((n) < 64) ? \ ++ &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ ++ &__REG2(0x40001100, ((n) & 0x3f) << 2))) ++ ++#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ ++#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ ++#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ ++#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ ++#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ ++#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ ++#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ ++#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ ++#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ ++#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ ++#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ ++#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ ++#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ ++#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ ++#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ ++#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */ ++#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */ ++#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ ++#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ ++#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ ++#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ ++#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ ++#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ ++#define DRCMR23 __REG(0x4000015c) /* Reserved */ ++#define DRCMR24 __REG(0x40000160) /* Reserved */ ++#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ ++#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ ++#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ ++#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ ++#define DRCMR29 __REG(0x40000174) /* Reserved */ ++#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ ++#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ ++#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ ++#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ ++#define DRCMR34 __REG(0x40000188) /* Reserved */ ++#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ ++#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ ++#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ ++#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ ++#define DRCMR39 __REG(0x4000019C) /* Reserved */ ++#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */ ++#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */ ++#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ ++#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ ++#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ ++ ++#define DRCMRRXSADR DRCMR2 ++#define DRCMRTXSADR DRCMR3 ++#define DRCMRRXBTRBR DRCMR4 ++#define DRCMRTXBTTHR DRCMR5 ++#define DRCMRRXFFRBR DRCMR6 ++#define DRCMRTXFFTHR DRCMR7 ++#define DRCMRRXMCDR DRCMR8 ++#define DRCMRRXMODR DRCMR9 ++#define DRCMRTXMODR DRCMR10 ++#define DRCMRRXPCDR DRCMR11 ++#define DRCMRTXPCDR DRCMR12 ++#define DRCMRRXSSDR DRCMR13 ++#define DRCMRTXSSDR DRCMR14 ++#define DRCMRRXSS2DR DRCMR15 ++#define DRCMRTXSS2DR DRCMR16 ++#define DRCMRRXICDR DRCMR17 ++#define DRCMRTXICDR DRCMR18 ++#define DRCMRRXSTRBR DRCMR19 ++#define DRCMRTXSTTHR DRCMR20 ++#define DRCMRRXMMC DRCMR21 ++#define DRCMRTXMMC DRCMR22 ++#define DRCMRRXSS3DR DRCMR66 ++#define DRCMRTXSS3DR DRCMR67 ++#define DRCMRUDC(x) DRCMR((x) + 24) ++ ++#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ ++#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ ++ ++#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ ++#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ ++#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ ++#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ ++#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ ++#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ ++#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ ++#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ ++#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ ++#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ ++#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ ++#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ ++#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ ++#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ ++#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ ++#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ ++#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ ++#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ ++#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ ++#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ ++#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ ++#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ ++#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ ++#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ ++#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ ++#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ ++#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ ++#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ ++#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ ++#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ ++#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ ++#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ ++#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ ++#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ ++#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ ++#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ ++#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ ++#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ ++#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ ++#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ ++#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ ++#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ ++#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ ++#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ ++#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ ++#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ ++#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ ++#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ ++#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ ++#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ ++#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ ++#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ ++#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ ++#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ ++#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ ++#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ ++#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ ++#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ ++#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ ++#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ ++#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ ++#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ ++#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ ++#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ ++ ++#define DDADR(x) __REG2(0x40000200, (x) << 4) ++#define DSADR(x) __REG2(0x40000204, (x) << 4) ++#define DTADR(x) __REG2(0x40000208, (x) << 4) ++#define DCMD(x) __REG2(0x4000020c, (x) << 4) ++ ++#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ ++#define DDADR_STOP (1 << 0) /* Stop (read / write) */ ++ ++#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ ++#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ ++#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ ++#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ ++#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ ++#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ ++#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ ++#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ ++#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ ++#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ ++#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ ++#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ ++#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ ++#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ ++ ++ ++/* ++ * UARTs ++ */ ++ ++/* Full Function UART (FFUART) */ ++#define FFUART FFRBR ++#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ ++#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ ++#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ ++#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ ++#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ ++#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ ++#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ ++#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ ++#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ ++#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ ++#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ ++#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ ++#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ ++ ++/* Bluetooth UART (BTUART) */ ++#define BTUART BTRBR ++#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ ++#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ ++#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ ++#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ ++#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ ++#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ ++#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ ++#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ ++#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ ++#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ ++#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ ++#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ ++#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ ++ ++/* Standard UART (STUART) */ ++#define STUART STRBR ++#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ ++#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ ++#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ ++#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ ++#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ ++#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ ++#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ ++#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ ++#define STMSR __REG(0x40700018) /* Reserved */ ++#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ ++#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ ++#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ ++#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ ++ ++/* Hardware UART (HWUART) */ ++#define HWUART HWRBR ++#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ ++#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ ++#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ ++#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ ++#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ ++#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ ++#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ ++#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ ++#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ ++#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ ++#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ ++#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ ++#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ ++#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ ++#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ ++#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ ++ ++#define IER_DMAE (1 << 7) /* DMA Requests Enable */ ++#define IER_UUE (1 << 6) /* UART Unit Enable */ ++#define IER_NRZE (1 << 5) /* NRZ coding Enable */ ++#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ ++#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ ++#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ ++#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ ++#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ ++ ++#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ ++#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ ++#define IIR_TOD (1 << 3) /* Time Out Detected */ ++#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ ++#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ ++#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ ++ ++#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ ++#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ ++#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ ++#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ ++#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ ++#define FCR_ITL_1 (0) ++#define FCR_ITL_8 (FCR_ITL1) ++#define FCR_ITL_16 (FCR_ITL2) ++#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) ++ ++#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ ++#define LCR_SB (1 << 6) /* Set Break */ ++#define LCR_STKYP (1 << 5) /* Sticky Parity */ ++#define LCR_EPS (1 << 4) /* Even Parity Select */ ++#define LCR_PEN (1 << 3) /* Parity Enable */ ++#define LCR_STB (1 << 2) /* Stop Bit */ ++#define LCR_WLS1 (1 << 1) /* Word Length Select */ ++#define LCR_WLS0 (1 << 0) /* Word Length Select */ ++ ++#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ ++#define LSR_TEMT (1 << 6) /* Transmitter Empty */ ++#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ ++#define LSR_BI (1 << 4) /* Break Interrupt */ ++#define LSR_FE (1 << 3) /* Framing Error */ ++#define LSR_PE (1 << 2) /* Parity Error */ ++#define LSR_OE (1 << 1) /* Overrun Error */ ++#define LSR_DR (1 << 0) /* Data Ready */ ++ ++#define MCR_LOOP (1 << 4) ++#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ ++#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ ++#define MCR_RTS (1 << 1) /* Request to Send */ ++#define MCR_DTR (1 << 0) /* Data Terminal Ready */ ++ ++#define MSR_DCD (1 << 7) /* Data Carrier Detect */ ++#define MSR_RI (1 << 6) /* Ring Indicator */ ++#define MSR_DSR (1 << 5) /* Data Set Ready */ ++#define MSR_CTS (1 << 4) /* Clear To Send */ ++#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ ++#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ ++#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ ++#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ ++ ++/* ++ * IrSR (Infrared Selection Register) ++ */ ++#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ ++#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ ++#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ ++#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ ++#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ ++ ++ ++/* ++ * I2C registers ++ */ ++ ++#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ ++#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ ++#define ICR __REG(0x40301690) /* I2C Control Register - ICR */ ++#define ISR __REG(0x40301698) /* I2C Status Register - ISR */ ++#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ ++ ++#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ ++#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ ++#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ ++#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ ++#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */ ++ ++#define ICR_START (1 << 0) /* start bit */ ++#define ICR_STOP (1 << 1) /* stop bit */ ++#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ ++#define ICR_TB (1 << 3) /* transfer byte bit */ ++#define ICR_MA (1 << 4) /* master abort */ ++#define ICR_SCLE (1 << 5) /* master clock enable */ ++#define ICR_IUE (1 << 6) /* unit enable */ ++#define ICR_GCD (1 << 7) /* general call disable */ ++#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ ++#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ ++#define ICR_BEIE (1 << 10) /* enable bus error ints */ ++#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ ++#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ ++#define ICR_SADIE (1 << 13) /* slave address detected int enable */ ++#define ICR_UR (1 << 14) /* unit reset */ ++ ++#define ISR_RWM (1 << 0) /* read/write mode */ ++#define ISR_ACKNAK (1 << 1) /* ack/nak status */ ++#define ISR_UB (1 << 2) /* unit busy */ ++#define ISR_IBB (1 << 3) /* bus busy */ ++#define ISR_SSD (1 << 4) /* slave stop detected */ ++#define ISR_ALD (1 << 5) /* arbitration loss detected */ ++#define ISR_ITE (1 << 6) /* tx buffer empty */ ++#define ISR_IRF (1 << 7) /* rx buffer full */ ++#define ISR_GCAD (1 << 8) /* general call address detected */ ++#define ISR_SAD (1 << 9) /* slave address detected */ ++#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ ++ ++ ++/* ++ * Serial Audio Controller ++ */ ++ ++#define SACR0 __REG(0x40400000) /* Global Control Register */ ++#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ ++#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ ++#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ ++#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ ++#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ ++#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ ++ ++#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ ++#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ ++#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ ++#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ ++#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ ++#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */ ++#define SACR0_ENB (1 << 0) /* Enable I2S Link */ ++#define SACR1_ENLBF (1 << 5) /* Enable Loopback */ ++#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */ ++#define SACR1_DREC (1 << 3) /* Disable Recording Function */ ++#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */ ++ ++#define SASR0_I2SOFF (1 << 7) /* Controller Status */ ++#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */ ++#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */ ++#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */ ++#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */ ++#define SASR0_BSY (1 << 2) /* I2S Busy */ ++#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */ ++#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */ ++ ++#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */ ++#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */ ++ ++#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */ ++#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */ ++#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ ++#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ ++ ++/* ++ * AC97 Controller registers ++ */ ++ ++#define POCR __REG(0x40500000) /* PCM Out Control Register */ ++#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ ++#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ ++ ++#define PICR __REG(0x40500004) /* PCM In Control Register */ ++#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ ++#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ ++ ++#define MCCR __REG(0x40500008) /* Mic In Control Register */ ++#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ ++#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ ++ ++#define GCR __REG(0x4050000C) /* Global Control Register */ ++#ifdef CONFIG_PXA3xx ++#define GCR_CLKBPB (1 << 31) /* Internal clock enable */ ++#endif ++#define GCR_nDMAEN (1 << 24) /* non DMA Enable */ ++#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ ++#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ ++#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ ++#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ ++#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ ++#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ ++#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ ++#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ ++#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ ++#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ ++ ++#define POSR __REG(0x40500010) /* PCM Out Status Register */ ++#define POSR_FIFOE (1 << 4) /* FIFO error */ ++#define POSR_FSR (1 << 2) /* FIFO Service Request */ ++ ++#define PISR __REG(0x40500014) /* PCM In Status Register */ ++#define PISR_FIFOE (1 << 4) /* FIFO error */ ++#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ ++#define PISR_FSR (1 << 2) /* FIFO Service Request */ ++ ++#define MCSR __REG(0x40500018) /* Mic In Status Register */ ++#define MCSR_FIFOE (1 << 4) /* FIFO error */ ++#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ ++#define MCSR_FSR (1 << 2) /* FIFO Service Request */ ++ ++#define GSR __REG(0x4050001C) /* Global Status Register */ ++#define GSR_CDONE (1 << 19) /* Command Done */ ++#define GSR_SDONE (1 << 18) /* Status Done */ ++#define GSR_RDCS (1 << 15) /* Read Completion Status */ ++#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ ++#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ ++#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ ++#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ ++#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ ++#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ ++#define GSR_PCR (1 << 8) /* Primary Codec Ready */ ++#define GSR_MCINT (1 << 7) /* Mic In Interrupt */ ++#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ ++#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ ++#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ ++#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ ++#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ ++#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ ++ ++#define CAR __REG(0x40500020) /* CODEC Access Register */ ++#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ ++ ++#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ ++#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ ++ ++#define MOCR __REG(0x40500100) /* Modem Out Control Register */ ++#define MOCR_FEIE (1 << 3) /* FIFO Error */ ++#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ ++ ++#define MICR __REG(0x40500108) /* Modem In Control Register */ ++#define MICR_FEIE (1 << 3) /* FIFO Error */ ++#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ ++ ++#define MOSR __REG(0x40500110) /* Modem Out Status Register */ ++#define MOSR_FIFOE (1 << 4) /* FIFO error */ ++#define MOSR_FSR (1 << 2) /* FIFO Service Request */ ++ ++#define MISR __REG(0x40500118) /* Modem In Status Register */ ++#define MISR_FIFOE (1 << 4) /* FIFO error */ ++#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ ++#define MISR_FSR (1 << 2) /* FIFO Service Request */ ++ ++#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ ++ ++#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ ++#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ ++#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ ++#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ ++ ++ ++/* ++ * USB Device Controller ++ * PXA25x and PXA27x USB device controller registers are different. ++ */ ++#if defined(CONFIG_PXA25x) ++ ++#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ ++#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ ++#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ ++ ++#define UDCCR __REG(0x40600000) /* UDC Control Register */ ++#define UDCCR_UDE (1 << 0) /* UDC enable */ ++#define UDCCR_UDA (1 << 1) /* UDC active */ ++#define UDCCR_RSM (1 << 2) /* Device resume */ ++#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ ++#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ ++#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ ++#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ ++#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ ++ ++#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ ++#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ ++#define UDCCS0_IPR (1 << 1) /* IN packet ready */ ++#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ ++#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ ++#define UDCCS0_SST (1 << 4) /* Sent stall */ ++#define UDCCS0_FST (1 << 5) /* Force stall */ ++#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ ++#define UDCCS0_SA (1 << 7) /* Setup active */ ++ ++/* Bulk IN - Endpoint 1,6,11 */ ++#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ ++#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ ++#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ ++ ++#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ ++#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ ++#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ ++#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ ++#define UDCCS_BI_SST (1 << 4) /* Sent stall */ ++#define UDCCS_BI_FST (1 << 5) /* Force stall */ ++#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ ++ ++/* Bulk OUT - Endpoint 2,7,12 */ ++#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ ++#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ ++#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ ++ ++#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ ++#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ ++#define UDCCS_BO_DME (1 << 3) /* DMA enable */ ++#define UDCCS_BO_SST (1 << 4) /* Sent stall */ ++#define UDCCS_BO_FST (1 << 5) /* Force stall */ ++#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ ++#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ ++ ++/* Isochronous IN - Endpoint 3,8,13 */ ++#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ ++#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ ++#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ ++ ++#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ ++#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ ++#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ ++#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ ++#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ ++ ++/* Isochronous OUT - Endpoint 4,9,14 */ ++#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ ++#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ ++#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ ++ ++#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ ++#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ ++#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ ++#define UDCCS_IO_DME (1 << 3) /* DMA enable */ ++#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ ++#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ ++ ++/* Interrupt IN - Endpoint 5,10,15 */ ++#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ ++#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ ++#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ ++ ++#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ ++#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ ++#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ ++#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ ++#define UDCCS_INT_SST (1 << 4) /* Sent stall */ ++#define UDCCS_INT_FST (1 << 5) /* Force stall */ ++#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ ++ ++#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ ++#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ ++#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ ++#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ ++#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ ++#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ ++#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ ++#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ ++#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ ++#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ ++#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ ++#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ ++#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ ++#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ ++#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ ++#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ ++#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ ++#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ ++#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ ++#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ ++#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ ++#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ ++#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ ++#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ ++ ++#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ ++ ++#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ ++#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ ++#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ ++#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ ++#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ ++#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ ++#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ ++#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ ++ ++#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ ++ ++#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ ++#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ ++#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ ++#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ ++#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ ++#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ ++#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ ++#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ ++ ++#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ ++ ++#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ ++#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ ++#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ ++#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ ++#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ ++#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ ++#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ ++#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ ++ ++#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ ++ ++#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ ++#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ ++#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ ++#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ ++#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ ++#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ ++#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ ++#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ ++ ++#elif defined(CONFIG_PXA27x) ++ ++#define UDCCR __REG(0x40600000) /* UDC Control Register */ ++#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ ++#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation ++ Protocol Port Support */ ++#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol ++ Support */ ++#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol ++ Enable */ ++#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ ++#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ ++#define UDCCR_ACN_S 11 ++#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ ++#define UDCCR_AIN_S 8 ++#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface ++ Setting Number */ ++#define UDCCR_AAISN_S 5 ++#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active ++ Configuration */ ++#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration ++ Error */ ++#define UDCCR_UDR (1 << 2) /* UDC Resume */ ++#define UDCCR_UDA (1 << 1) /* UDC Active */ ++#define UDCCR_UDE (1 << 0) /* UDC Enable */ ++ ++#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ ++#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ ++#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ ++#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ ++ ++#define UDC_INT_FIFOERROR (0x2) ++#define UDC_INT_PACKETCMP (0x1) ++ ++#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) ++#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ ++#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ ++#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ ++#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ ++#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ ++ ++#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ ++#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ ++#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) ++#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ ++#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ ++#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ ++#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ ++#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ ++ ++#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ ++#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ ++#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ ++#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt ++ Rising Edge Interrupt Enable */ ++#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt ++ Falling Edge Interrupt Enable */ ++#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge ++ Interrupt Enable */ ++#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge ++ Interrupt Enable */ ++#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge ++ Interrupt Enable */ ++#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge ++ Interrupt Enable */ ++#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge ++ Interrupt Enable */ ++#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge ++ Interrupt Enable */ ++#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising ++ Edge Interrupt Enable */ ++#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling ++ Edge Interrupt Enable */ ++#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge ++ Interrupt Enable */ ++#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge ++ Interrupt Enable */ ++ ++#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ ++ ++#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ ++#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ ++#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ ++#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ ++#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ ++#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ ++#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ ++#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ ++#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ ++#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ ++#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ ++#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ ++#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ ++#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ ++ ++#define UDCCSN(x) __REG2(0x40600100, (x) << 2) ++#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ ++#define UDCCSR0_SA (1 << 7) /* Setup Active */ ++#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ ++#define UDCCSR0_FST (1 << 5) /* Force Stall */ ++#define UDCCSR0_SST (1 << 4) /* Sent Stall */ ++#define UDCCSR0_DME (1 << 3) /* DMA Enable */ ++#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ ++#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ ++#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ ++ ++#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ ++#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ ++#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ ++#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ ++#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ ++#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ ++#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ ++#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ ++#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ ++#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ ++#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ ++#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ ++#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ ++#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ ++#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ ++#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ ++#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ ++#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ ++#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ ++#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ ++#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ ++#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ ++#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ ++ ++#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ ++#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ ++#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ ++#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ ++#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ ++#define UDCCSR_FST (1 << 5) /* Force STALL */ ++#define UDCCSR_SST (1 << 4) /* Sent STALL */ ++#define UDCCSR_DME (1 << 3) /* DMA Enable */ ++#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ ++#define UDCCSR_PC (1 << 1) /* Packet Complete */ ++#define UDCCSR_FS (1 << 0) /* FIFO needs service */ ++ ++#define UDCBCN(x) __REG2(0x40600200, (x)<<2) ++#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ ++#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ ++#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ ++#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ ++#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ ++#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ ++#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ ++#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ ++#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ ++#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ ++#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ ++#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ ++#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ ++#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ ++#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ ++#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ ++#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ ++#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ ++#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ ++#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ ++#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ ++#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ ++#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ ++#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ ++ ++#define UDCDN(x) __REG2(0x40600300, (x)<<2) ++#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) ++#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) ++#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ ++#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ ++#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ ++#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ ++#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ ++#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ ++#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ ++#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ ++#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ ++#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ ++#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ ++#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ ++#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ ++#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ ++#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ ++#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ ++#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ ++#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ ++#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ ++#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ ++#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ ++#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ ++#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ ++#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ ++ ++#define UDCCN(x) __REG2(0x40600400, (x)<<2) ++#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ ++#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ ++#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ ++#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ ++#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ ++#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ ++#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ ++#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ ++#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ ++#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ ++#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ ++#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ ++#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ ++#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ ++#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ ++#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ ++#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ ++#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ ++#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ ++#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ ++#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ ++#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ ++#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ ++ ++#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ ++#define UDCCONR_CN_S (25) ++#define UDCCONR_IN (0x07 << 22) /* Interface Number */ ++#define UDCCONR_IN_S (22) ++#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ ++#define UDCCONR_AISN_S (19) ++#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ ++#define UDCCONR_EN_S (15) ++#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ ++#define UDCCONR_ET_S (13) ++#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ ++#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ ++#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ ++#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ ++#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ ++#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ ++#define UDCCONR_MPS_S (2) ++#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ ++#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ ++ ++ ++#define UDC_INT_FIFOERROR (0x2) ++#define UDC_INT_PACKETCMP (0x1) ++ ++#define UDC_FNR_MASK (0x7ff) ++ ++#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) ++#define UDC_BCR_MASK (0x3ff) ++#endif ++ ++/* ++ * Fast Infrared Communication Port ++ */ ++ ++#define FICP __REG(0x40800000) /* Start of FICP area */ ++#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ ++#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ ++#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ ++#define ICDR __REG(0x4080000c) /* ICP Data Register */ ++#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ ++#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ ++ ++#define ICCR0_AME (1 << 7) /* Address match enable */ ++#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ ++#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ ++#define ICCR0_RXE (1 << 4) /* Receive enable */ ++#define ICCR0_TXE (1 << 3) /* Transmit enable */ ++#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ ++#define ICCR0_LBM (1 << 1) /* Loopback mode */ ++#define ICCR0_ITR (1 << 0) /* IrDA transmission */ ++ ++#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ ++#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ ++#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ ++#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ ++#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ ++#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ ++ ++#ifdef CONFIG_PXA27x ++#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ ++#endif ++#define ICSR0_FRE (1 << 5) /* Framing error */ ++#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ ++#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ ++#define ICSR0_RAB (1 << 2) /* Receiver abort */ ++#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ ++#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ ++ ++#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ ++#define ICSR1_CRE (1 << 5) /* CRC error */ ++#define ICSR1_EOF (1 << 4) /* End of frame */ ++#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ ++#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ ++#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ ++#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ ++ ++ ++/* ++ * Real Time Clock ++ */ ++ ++#define RCNR __REG(0x40900000) /* RTC Count Register */ ++#define RTAR __REG(0x40900004) /* RTC Alarm Register */ ++#define RTSR __REG(0x40900008) /* RTC Status Register */ ++#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ ++#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ ++ ++#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ ++#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ ++#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ ++#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ ++#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ ++#define RTSR_AL (1 << 0) /* RTC alarm detected */ ++ ++ ++/* ++ * OS Timer & Match Registers ++ */ ++ ++#define OSMR0 __REG(0x40A00000) /* */ ++#define OSMR1 __REG(0x40A00004) /* */ ++#define OSMR2 __REG(0x40A00008) /* */ ++#define OSMR3 __REG(0x40A0000C) /* */ ++#define OSMR4 __REG(0x40A00080) /* */ ++#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ ++#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ ++#define OMCR4 __REG(0x40A000C0) /* */ ++#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ ++#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ ++#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ ++ ++#define OSSR_M3 (1 << 3) /* Match status channel 3 */ ++#define OSSR_M2 (1 << 2) /* Match status channel 2 */ ++#define OSSR_M1 (1 << 1) /* Match status channel 1 */ ++#define OSSR_M0 (1 << 0) /* Match status channel 0 */ ++ ++#define OWER_WME (1 << 0) /* Watchdog Match Enable */ ++ ++#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ ++#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ ++#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ ++#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ ++ ++ ++/* ++ * Pulse Width Modulator ++ */ ++ ++#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ ++#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ ++#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ ++ ++#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ ++#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ ++#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ ++ ++ ++/* ++ * Interrupt Controller ++ */ ++ ++#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ ++#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ ++#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ ++#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ ++#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ ++#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ ++ ++ ++/* ++ * General Purpose I/O ++ */ ++ ++#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) ++#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) ++#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) ++#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) ++ ++#define GPLR_OFFSET 0x00 ++#define GPDR_OFFSET 0x0C ++#define GPSR_OFFSET 0x18 ++#define GPCR_OFFSET 0x24 ++#define GRER_OFFSET 0x30 ++#define GFER_OFFSET 0x3C ++#define GEDR_OFFSET 0x48 ++ ++#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ ++#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ ++#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ ++ ++#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ ++#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ ++#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ ++ ++#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ ++#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ ++#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ ++ ++#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ ++#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ ++#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ ++ ++#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ ++#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ ++#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ ++ ++#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ ++#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ ++#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ ++ ++#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ ++#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ ++#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ ++ ++#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ ++#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ ++#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ ++#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ ++#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ ++#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ ++#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ ++#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ ++ ++#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ ++#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ ++#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ ++#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ ++#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ ++#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ ++#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ ++ ++/* More handy macros. The argument is a literal GPIO number. */ ++ ++#define GPIO_bit(x) (1 << ((x) & 0x1f)) ++ ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) ++ ++/* Interrupt Controller */ ++ ++#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ ++#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ ++#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ ++#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ ++#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ ++ ++#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) ++#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) ++#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) ++#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) ++#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) ++#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) ++#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) ++#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) ++ ++#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) ++#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) ++#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) ++#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) ++#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) ++#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) ++#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) ++#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ ++ ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) ++#else ++ ++#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) ++#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) ++#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) ++#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) ++#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) ++#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) ++#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) ++#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) ++ ++#endif ++ ++ ++/* GPIO alternate function assignments */ ++ ++#define GPIO1_RST 1 /* reset */ ++#define GPIO6_MMCCLK 6 /* MMC Clock */ ++#define GPIO7_48MHz 7 /* 48 MHz clock output */ ++#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ ++#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ ++#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ ++#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ ++#define GPIO12_32KHz 12 /* 32 kHz out */ ++#define GPIO13_MBGNT 13 /* memory controller grant */ ++#define GPIO14_MBREQ 14 /* alternate bus master request */ ++#define GPIO15_nCS_1 15 /* chip select 1 */ ++#define GPIO16_PWM0 16 /* PWM0 output */ ++#define GPIO17_PWM1 17 /* PWM1 output */ ++#define GPIO18_RDY 18 /* Ext. Bus Ready */ ++#define GPIO19_DREQ1 19 /* External DMA Request */ ++#define GPIO20_DREQ0 20 /* External DMA Request */ ++#define GPIO23_SCLK 23 /* SSP clock */ ++#define GPIO24_SFRM 24 /* SSP Frame */ ++#define GPIO25_STXD 25 /* SSP transmit */ ++#define GPIO26_SRXD 26 /* SSP receive */ ++#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ ++#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ ++#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ ++#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ ++#define GPIO31_SYNC 31 /* AC97/I2S sync */ ++#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ ++#define GPIO32_SYSCLK 32 /* I2S System Clock */ ++#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ ++#define GPIO33_nCS_5 33 /* chip select 5 */ ++#define GPIO34_FFRXD 34 /* FFUART receive */ ++#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ ++#define GPIO35_FFCTS 35 /* FFUART Clear to send */ ++#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ ++#define GPIO37_FFDSR 37 /* FFUART data set ready */ ++#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ ++#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ ++#define GPIO39_FFTXD 39 /* FFUART transmit data */ ++#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ ++#define GPIO41_FFRTS 41 /* FFUART request to send */ ++#define GPIO42_BTRXD 42 /* BTUART receive data */ ++#define GPIO42_HWRXD 42 /* HWUART receive data */ ++#define GPIO43_BTTXD 43 /* BTUART transmit data */ ++#define GPIO43_HWTXD 43 /* HWUART transmit data */ ++#define GPIO44_BTCTS 44 /* BTUART clear to send */ ++#define GPIO44_HWCTS 44 /* HWUART clear to send */ ++#define GPIO45_BTRTS 45 /* BTUART request to send */ ++#define GPIO45_HWRTS 45 /* HWUART request to send */ ++#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ ++#define GPIO46_ICPRXD 46 /* ICP receive data */ ++#define GPIO46_STRXD 46 /* STD_UART receive data */ ++#define GPIO47_ICPTXD 47 /* ICP transmit data */ ++#define GPIO47_STTXD 47 /* STD_UART transmit data */ ++#define GPIO48_nPOE 48 /* Output Enable for Card Space */ ++#define GPIO49_nPWE 49 /* Write Enable for Card Space */ ++#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ ++#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ ++#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ ++#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ ++#define GPIO53_MMCCLK 53 /* MMC Clock */ ++#define GPIO54_MMCCLK 54 /* MMC Clock */ ++#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ ++#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ ++#define GPIO55_nPREG 55 /* Card Address bit 26 */ ++#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ ++#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ ++#define GPIO58_LDD_0 58 /* LCD data pin 0 */ ++#define GPIO59_LDD_1 59 /* LCD data pin 1 */ ++#define GPIO60_LDD_2 60 /* LCD data pin 2 */ ++#define GPIO61_LDD_3 61 /* LCD data pin 3 */ ++#define GPIO62_LDD_4 62 /* LCD data pin 4 */ ++#define GPIO63_LDD_5 63 /* LCD data pin 5 */ ++#define GPIO64_LDD_6 64 /* LCD data pin 6 */ ++#define GPIO65_LDD_7 65 /* LCD data pin 7 */ ++#define GPIO66_LDD_8 66 /* LCD data pin 8 */ ++#define GPIO66_MBREQ 66 /* alternate bus master req */ ++#define GPIO67_LDD_9 67 /* LCD data pin 9 */ ++#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ ++#define GPIO68_LDD_10 68 /* LCD data pin 10 */ ++#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ ++#define GPIO69_LDD_11 69 /* LCD data pin 11 */ ++#define GPIO69_MMCCLK 69 /* MMC_CLK */ ++#define GPIO70_LDD_12 70 /* LCD data pin 12 */ ++#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ ++#define GPIO71_LDD_13 71 /* LCD data pin 13 */ ++#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ ++#define GPIO72_LDD_14 72 /* LCD data pin 14 */ ++#define GPIO72_32kHz 72 /* 32 kHz clock */ ++#define GPIO73_LDD_15 73 /* LCD data pin 15 */ ++#define GPIO73_MBGNT 73 /* Memory controller grant */ ++#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ ++#define GPIO75_LCD_LCLK 75 /* LCD line clock */ ++#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ ++#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ ++#define GPIO78_nCS_2 78 /* chip select 2 */ ++#define GPIO79_nCS_3 79 /* chip select 3 */ ++#define GPIO80_nCS_4 80 /* chip select 4 */ ++#define GPIO81_NSCLK 81 /* NSSP clock */ ++#define GPIO82_NSFRM 82 /* NSSP Frame */ ++#define GPIO83_NSTXD 83 /* NSSP transmit */ ++#define GPIO84_NSRXD 84 /* NSSP receive */ ++#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ ++#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ ++#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ ++#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ ++#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ ++#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ ++#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ ++#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ ++#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ ++#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ ++#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ ++ ++/* GPIO alternate function mode & direction */ ++ ++#define GPIO_IN 0x000 ++#define GPIO_OUT 0x080 ++#define GPIO_ALT_FN_1_IN 0x100 ++#define GPIO_ALT_FN_1_OUT 0x180 ++#define GPIO_ALT_FN_2_IN 0x200 ++#define GPIO_ALT_FN_2_OUT 0x280 ++#define GPIO_ALT_FN_3_IN 0x300 ++#define GPIO_ALT_FN_3_OUT 0x380 ++#define GPIO_MD_MASK_NR 0x07f ++#define GPIO_MD_MASK_DIR 0x080 ++#define GPIO_MD_MASK_FN 0x300 ++#define GPIO_DFLT_LOW 0x400 ++#define GPIO_DFLT_HIGH 0x800 ++ ++#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) ++#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) ++#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) ++#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) ++#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) ++#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) ++#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) ++#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) ++#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) ++#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) ++#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) ++#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) ++#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) ++#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) ++#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) ++#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) ++#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) ++#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) ++#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) ++#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) ++#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) ++#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) ++#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) ++#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) ++#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) ++#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) ++#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) ++#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) ++#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) ++#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) ++#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) ++#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) ++#define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT) ++#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) ++#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) ++#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) ++#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) ++#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) ++#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) ++#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) ++#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) ++#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) ++#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) ++#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) ++#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) ++#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) ++#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) ++#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) ++#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) ++#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) ++#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) ++#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) ++#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) ++#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) ++#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) ++#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) ++#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) ++#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) ++#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) ++#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) ++#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) ++#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) ++#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) ++#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) ++#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) ++#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) ++#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) ++#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) ++#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) ++#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) ++#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) ++#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) ++#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) ++#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) ++#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) ++#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) ++#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) ++#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) ++#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) ++#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) ++#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) ++#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) ++#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) ++#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) ++#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) ++#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) ++#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) ++#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) ++#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) ++#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) ++#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) ++#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) ++#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) ++#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) ++#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) ++#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) ++#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) ++#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) ++#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) ++#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) ++#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) ++#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) ++#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) ++#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) ++#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) ++#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) ++#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) ++#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) ++#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) ++#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) ++#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) ++#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) ++#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) ++#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) ++#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) ++#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) ++#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) ++#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) ++#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) ++#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) ++#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) ++#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) ++#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) ++#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) ++#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) ++#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) ++#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) ++#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) ++#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) ++ ++/* ++ * Power Manager ++ */ ++ ++#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ ++#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ ++#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ ++#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ ++#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ ++#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ ++#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ ++#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ ++#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ ++#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ ++#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ ++#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ ++#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ ++ ++#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ ++#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */ ++#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */ ++#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */ ++#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ ++#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ ++#define PCMD(x) __REG2(0x40F00080, (x)<<2) ++#define PCMD0 __REG(0x40F00080 + 0 * 4) ++#define PCMD1 __REG(0x40F00080 + 1 * 4) ++#define PCMD2 __REG(0x40F00080 + 2 * 4) ++#define PCMD3 __REG(0x40F00080 + 3 * 4) ++#define PCMD4 __REG(0x40F00080 + 4 * 4) ++#define PCMD5 __REG(0x40F00080 + 5 * 4) ++#define PCMD6 __REG(0x40F00080 + 6 * 4) ++#define PCMD7 __REG(0x40F00080 + 7 * 4) ++#define PCMD8 __REG(0x40F00080 + 8 * 4) ++#define PCMD9 __REG(0x40F00080 + 9 * 4) ++#define PCMD10 __REG(0x40F00080 + 10 * 4) ++#define PCMD11 __REG(0x40F00080 + 11 * 4) ++#define PCMD12 __REG(0x40F00080 + 12 * 4) ++#define PCMD13 __REG(0x40F00080 + 13 * 4) ++#define PCMD14 __REG(0x40F00080 + 14 * 4) ++#define PCMD15 __REG(0x40F00080 + 15 * 4) ++#define PCMD16 __REG(0x40F00080 + 16 * 4) ++#define PCMD17 __REG(0x40F00080 + 17 * 4) ++#define PCMD18 __REG(0x40F00080 + 18 * 4) ++#define PCMD19 __REG(0x40F00080 + 19 * 4) ++#define PCMD20 __REG(0x40F00080 + 20 * 4) ++#define PCMD21 __REG(0x40F00080 + 21 * 4) ++#define PCMD22 __REG(0x40F00080 + 22 * 4) ++#define PCMD23 __REG(0x40F00080 + 23 * 4) ++#define PCMD24 __REG(0x40F00080 + 24 * 4) ++#define PCMD25 __REG(0x40F00080 + 25 * 4) ++#define PCMD26 __REG(0x40F00080 + 26 * 4) ++#define PCMD27 __REG(0x40F00080 + 27 * 4) ++#define PCMD28 __REG(0x40F00080 + 28 * 4) ++#define PCMD29 __REG(0x40F00080 + 29 * 4) ++#define PCMD30 __REG(0x40F00080 + 30 * 4) ++#define PCMD31 __REG(0x40F00080 + 31 * 4) ++ ++#define PCMD_MBC (1<<12) ++#define PCMD_DCE (1<<11) ++#define PCMD_LC (1<<10) ++/* FIXME: PCMD_SQC need be checked. */ ++#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, ++ bit 9 should be 0 all day. */ ++#define PVCR_VCSA (0x1<<14) ++#define PVCR_CommandDelay (0xf80) ++#define PCFR_PI2C_EN (0x1 << 6) ++ ++#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ ++#define PSSR_RDH (1 << 5) /* Read Disable Hold */ ++#define PSSR_PH (1 << 4) /* Peripheral Control Hold */ ++#define PSSR_STS (1 << 3) /* Standby Mode Status */ ++#define PSSR_VFS (1 << 2) /* VDD Fault Status */ ++#define PSSR_BFS (1 << 1) /* Battery Fault Status */ ++#define PSSR_SSS (1 << 0) /* Software Sleep Status */ ++ ++#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ ++ ++#define PCFR_RO (1 << 15) /* RDH Override */ ++#define PCFR_PO (1 << 14) /* PH Override */ ++#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ ++#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ ++#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ ++#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ ++#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ ++#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ ++#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ ++#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ ++#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ ++#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ ++ ++#define RCSR_GPR (1 << 3) /* GPIO Reset */ ++#define RCSR_SMR (1 << 2) /* Sleep Mode */ ++#define RCSR_WDR (1 << 1) /* Watchdog Reset */ ++#define RCSR_HWR (1 << 0) /* Hardware Reset */ ++ ++#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */ ++#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ ++#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ ++#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ ++#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ ++#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ ++#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ ++#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ ++#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ ++#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ ++#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ ++#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ ++#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ ++#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ ++#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ ++#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ ++#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ ++#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ ++ ++/* ++ * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h ++ */ ++ ++/* ++ * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h ++ */ ++ ++/* ++ * Core Clock ++ */ ++ ++#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ ++#define CKEN __REG(0x41300004) /* Clock Enable Register */ ++#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ ++#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ ++ ++#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ ++#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ ++#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ ++ ++#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ ++#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ ++#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ ++#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ ++#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ ++#define CKEN_IM (20) /* Internal Memory Clock Enable */ ++#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ ++#define CKEN_USIM (18) /* USIM Unit Clock Enable */ ++#define CKEN_MSL (17) /* MSL Unit Clock Enable */ ++#define CKEN_LCD (16) /* LCD Unit Clock Enable */ ++#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ ++#define CKEN_I2C (14) /* I2C Unit Clock Enable */ ++#define CKEN_FICP (13) /* FICP Unit Clock Enable */ ++#define CKEN_MMC (12) /* MMC Unit Clock Enable */ ++#define CKEN_USB (11) /* USB Unit Clock Enable */ ++#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ ++#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ ++#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ ++#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ ++#define CKEN_I2S (8) /* I2S Unit Clock Enable */ ++#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ ++#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ ++#define CKEN_STUART (5) /* STUART Unit Clock Enable */ ++#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ ++#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ ++#define CKEN_SSP (3) /* SSP Unit Clock Enable */ ++#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ ++#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ ++#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ ++#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ ++ ++#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ ++#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ ++ ++ ++/* ++ * LCD ++ */ ++ ++#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ ++#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ ++#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ ++#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ ++#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 3 */ ++#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ ++#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ ++#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ ++#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ ++#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ ++#define TMEDCR __REG(0x44000044) /* TMED Control Register */ ++ ++#define LCCR3_1BPP (0 << 24) ++#define LCCR3_2BPP (1 << 24) ++#define LCCR3_4BPP (2 << 24) ++#define LCCR3_8BPP (3 << 24) ++#define LCCR3_16BPP (4 << 24) ++ ++#define LCCR3_PDFOR_0 (0 << 30) ++#define LCCR3_PDFOR_1 (1 << 30) ++#define LCCR3_PDFOR_2 (2 << 30) ++#define LCCR3_PDFOR_3 (3 << 30) ++ ++#define LCCR4_PAL_FOR_0 (0 << 15) ++#define LCCR4_PAL_FOR_1 (1 << 15) ++#define LCCR4_PAL_FOR_2 (2 << 15) ++#define LCCR4_PAL_FOR_MASK (3 << 15) ++ ++#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ ++#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ ++#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */ ++#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */ ++#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */ ++#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */ ++#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */ ++#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */ ++ ++#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ ++#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ ++#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ ++#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ ++#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display */ ++ /* Select */ ++#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ ++#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ ++ ++#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ ++#define LCCR0_SFM (1 << 4) /* Start of frame mask */ ++#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ ++#define LCCR0_EFM (1 << 6) /* End of Frame mask */ ++#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ ++#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ ++#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ ++#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome */ ++ /* display mode) */ ++#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ ++ /* display */ ++#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ ++ /* display */ ++#define LCCR0_DIS (1 << 10) /* LCD Disable */ ++#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ ++#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ ++#define LCCR0_PDD_S 12 ++#define LCCR0_BM (1 << 20) /* Branch mask */ ++#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ ++#define LCCR0_LCDT (1 << 22) /* LCD panel type */ ++#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ ++#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ ++#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ ++#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ ++ ++#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ ++#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ ++ (((Pixel) - 1) << FShft (LCCR1_PPL)) ++ ++#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ ++#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ ++ /* pulse Width [1..64 Tpix] */ \ ++ (((Tpix) - 1) << FShft (LCCR1_HSW)) ++ ++#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ ++ /* count - 1 [Tpix] */ ++#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ ++ /* [1..256 Tpix] */ \ ++ (((Tpix) - 1) << FShft (LCCR1_ELW)) ++ ++#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ ++ /* Wait count - 1 [Tpix] */ ++#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ ++ /* [1..256 Tpix] */ \ ++ (((Tpix) - 1) << FShft (LCCR1_BLW)) ++ ++ ++#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ ++#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ ++ (((Line) - 1) << FShft (LCCR2_LPP)) ++ ++#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ ++ /* Width - 1 [Tln] (L_FCLK) */ ++#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ ++ /* Width [1..64 Tln] */ \ ++ (((Tln) - 1) << FShft (LCCR2_VSW)) ++ ++#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ ++ /* count [Tln] */ ++#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ ++ /* [0..255 Tln] */ \ ++ ((Tln) << FShft (LCCR2_EFW)) ++ ++#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ ++ /* Wait count [Tln] */ ++#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ ++ /* [0..255 Tln] */ \ ++ ((Tln) << FShft (LCCR2_BFW)) ++ ++#if 0 ++#define LCCR3_PCD (0xff) /* Pixel clock divisor */ ++#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */ ++#define LCCR3_ACB_S 8 ++#endif ++ ++#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ ++#define LCCR3_API_S 16 ++#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ ++#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ ++#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ ++#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ ++#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ ++ ++#define LCCR3_OEP (1 << 23) /* Output Enable Polarity (L_BIAS, */ ++ /* active display mode) */ ++#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ ++#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ ++ ++#if 0 ++#define LCCR3_BPP (7 << 24) /* bits per pixel */ ++#define LCCR3_BPP_S 24 ++#endif ++#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ ++ ++ ++#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ ++#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ ++ (((Div) << FShft (LCCR3_PCD))) ++ ++ ++#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ ++#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ ++ (((Bpp) << FShft (LCCR3_BPP))) ++ ++#define LCCR3_ACB Fld (8, 8) /* AC Bias */ ++#define LCCR3_Acb(Acb) /* BAC Bias */ \ ++ (((Acb) << FShft (LCCR3_ACB))) ++ ++#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ ++ /* pulse active High */ ++#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ ++ ++#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ ++ /* active High */ ++#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ ++ /* active Low */ ++ ++#define LCSR_LDD (1 << 0) /* LCD Disable Done */ ++#define LCSR_SOF (1 << 1) /* Start of frame */ ++#define LCSR_BER (1 << 2) /* Bus error */ ++#define LCSR_ABC (1 << 3) /* AC Bias count */ ++#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ ++#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ ++#define LCSR_OU (1 << 6) /* output FIFO underrun */ ++#define LCSR_QD (1 << 7) /* quick disable */ ++#define LCSR_EOF (1 << 8) /* end of frame */ ++#define LCSR_BS (1 << 9) /* branch status */ ++#define LCSR_SINT (1 << 10) /* subsequent interrupt */ ++ ++#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ ++ ++#define LCSR_LDD (1 << 0) /* LCD Disable Done */ ++#define LCSR_SOF (1 << 1) /* Start of frame */ ++#define LCSR_BER (1 << 2) /* Bus error */ ++#define LCSR_ABC (1 << 3) /* AC Bias count */ ++#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ ++#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ ++#define LCSR_OU (1 << 6) /* output FIFO underrun */ ++#define LCSR_QD (1 << 7) /* quick disable */ ++#define LCSR_EOF (1 << 8) /* end of frame */ ++#define LCSR_BS (1 << 9) /* branch status */ ++#define LCSR_SINT (1 << 10) /* subsequent interrupt */ ++ ++#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ ++ ++#ifdef CONFIG_PXA27x ++ ++/* ++ * Keypad ++ */ ++#define KPC __REG(0x41500000) /* Keypad Interface Control register */ ++#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ ++#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */ ++#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */ ++#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ ++#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ ++#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ ++#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ ++#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ ++#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ ++ ++#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ ++#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ ++#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ ++#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ ++#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ ++#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ ++#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ ++#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ ++#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ ++#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ ++#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ ++#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ ++#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7) ++#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ ++#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ ++#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ ++#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ ++#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ ++#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ ++#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ ++#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ ++#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ ++ ++#define KPDK_DKP (0x1 << 31) ++#define KPDK_DK7 (0x1 << 7) ++#define KPDK_DK6 (0x1 << 6) ++#define KPDK_DK5 (0x1 << 5) ++#define KPDK_DK4 (0x1 << 4) ++#define KPDK_DK3 (0x1 << 3) ++#define KPDK_DK2 (0x1 << 2) ++#define KPDK_DK1 (0x1 << 1) ++#define KPDK_DK0 (0x1 << 0) ++ ++#define KPREC_OF1 (0x1 << 31) ++#define kPREC_UF1 (0x1 << 30) ++#define KPREC_OF0 (0x1 << 15) ++#define KPREC_UF0 (0x1 << 14) ++ ++#define KPMK_MKP (0x1 << 31) ++#define KPAS_SO (0x1 << 31) ++#define KPASMKPx_SO (0x1 << 31) ++ ++/* Camera Interface */ ++#define CICR0 __REG(0x50000000) ++#define CICR1 __REG(0x50000004) ++#define CICR2 __REG(0x50000008) ++#define CICR3 __REG(0x5000000C) ++#define CICR4 __REG(0x50000010) ++#define CISR __REG(0x50000014) ++#define CIFR __REG(0x50000018) ++#define CITOR __REG(0x5000001C) ++#define CIBR0 __REG(0x50000028) ++#define CIBR1 __REG(0x50000030) ++#define CIBR2 __REG(0x50000038) ++ ++#define CICR0_DMAEN (1 << 31) /* DMA request enable */ ++#define CICR0_PAR_EN (1 << 30) /* Parity enable */ ++#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ ++#define CICR0_ENB (1 << 28) /* Camera interface enable */ ++#define CICR0_DIS (1 << 27) /* Camera interface disable */ ++#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ ++#define CICR0_TOM (1 << 9) /* Time-out mask */ ++#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ ++#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ ++#define CICR0_EOLM (1 << 6) /* End-of-line mask */ ++#define CICR0_PERRM (1 << 5) /* Parity-error mask */ ++#define CICR0_QDM (1 << 4) /* Quick-disable mask */ ++#define CICR0_CDM (1 << 3) /* Disable-done mask */ ++#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ ++#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ ++#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ ++ ++#define CICR1_TBIT (1 << 31) /* Transparency bit */ ++#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */ ++#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ ++#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ ++#define CICR1_RGB_F (1 << 11) /* RGB format */ ++#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ ++#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ ++#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ ++#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ ++#define CICR1_DW (0x7 << 0) /* Data width mask */ ++ ++#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock ++ wait count mask */ ++#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock ++ wait count mask */ ++#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ ++#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock ++ wait count mask */ ++#define CICR2_FSW (0x7 << 0) /* Frame stabilization ++ wait count mask */ ++ ++#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock ++ wait count mask */ ++#define CICR3_EFW (0xff << 16) /* End-of-frame line clock ++ wait count mask */ ++#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ ++#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock ++ wait count mask */ ++#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */ ++ ++#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ ++#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ ++#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ ++#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ ++#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ ++#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ ++#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ ++#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ ++ ++#define CISR_FTO (1 << 15) /* FIFO time-out */ ++#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ ++#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ ++#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ ++#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ ++#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ ++#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ ++#define CISR_EOL (1 << 8) /* End of line */ ++#define CISR_PAR_ERR (1 << 7) /* Parity error */ ++#define CISR_CQD (1 << 6) /* Camera interface quick disable */ ++#define CISR_CDD (1 << 5) /* Camera interface disable done */ ++#define CISR_SOF (1 << 4) /* Start of frame */ ++#define CISR_EOF (1 << 3) /* End of frame */ ++#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ ++#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ ++#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ ++ ++#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ ++#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ ++#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ ++#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ ++#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ ++#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ ++#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ ++#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ ++ ++#define SRAM_SIZE 0x40000 /* 4x64K */ ++ ++#define SRAM_MEM_PHYS 0x5C000000 ++ ++#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ ++#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ ++ ++#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ ++#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ ++#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ ++#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ ++ ++#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ ++#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ ++#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ ++#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ ++ ++#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ ++#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ ++#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ ++#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ ++ ++#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ ++#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ ++#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ ++#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ ++ ++#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ ++#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ ++#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ ++#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ ++ ++#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ ++ ++#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ ++#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ ++#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ ++ ++#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ ++#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ ++#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ ++ ++#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ ++#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ ++#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ ++ ++#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ ++#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ ++#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ ++ ++#endif ++ ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) ++/* ++ * UHC: USB Host Controller (OHCI-like) register definitions ++ */ ++#define UHC_BASE_PHYS (0x4C000000) ++#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ ++#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ ++#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ ++#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ ++#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ ++#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ ++#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ ++#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ ++#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ ++#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ ++#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ ++#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ ++#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ ++#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ ++#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ ++#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ ++#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ ++#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ ++ ++#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ ++#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ ++ ++#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ ++#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ ++#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ ++#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ ++#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ ++ ++#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ ++#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ ++#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ ++#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ ++#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ ++#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ ++#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ ++#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ ++#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ ++#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ ++ ++#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ ++#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ ++#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ ++#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ ++#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ ++#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ ++#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ ++#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ ++#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ ++#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ ++#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ ++#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ ++ ++#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ ++#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ ++#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ ++#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ ++#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ ++#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort ++ Interrupt Enable*/ ++#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ ++#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ ++ ++#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ ++ ++#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ ++ ++/* PWRMODE register M field values */ ++ ++#define PWRMODE_IDLE 0x1 ++#define PWRMODE_STANDBY 0x2 ++#define PWRMODE_SLEEP 0x3 ++#define PWRMODE_DEEPSLEEP 0x7 ++ ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/regs-ssp.h linux-2.6.25-rc4/include/asm-arm/arch/regs-ssp.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/regs-ssp.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/regs-ssp.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,113 @@ ++#ifndef __ASM_ARCH_REGS_SSP_H ++#define __ASM_ARCH_REGS_SSP_H ++ ++/* ++ * SSP Serial Port Registers ++ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. ++ * PXA255, PXA26x and PXA27x have extra ports, registers and bits. ++ */ ++ ++#define SSCR0 (0x00) /* SSP Control Register 0 */ ++#define SSCR1 (0x04) /* SSP Control Register 1 */ ++#define SSSR (0x08) /* SSP Status Register */ ++#define SSITR (0x0C) /* SSP Interrupt Test Register */ ++#define SSDR (0x10) /* SSP Data Write/Data Read Register */ ++ ++#define SSTO (0x28) /* SSP Time Out Register */ ++#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */ ++#define SSTSA (0x30) /* SSP Tx Timeslot Active */ ++#define SSRSA (0x34) /* SSP Rx Timeslot Active */ ++#define SSTSS (0x38) /* SSP Timeslot Status */ ++#define SSACD (0x3C) /* SSP Audio Clock Divider */ ++ ++/* Common PXA2xx bits first */ ++#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ ++#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ ++#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ ++#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ ++#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ ++#define SSCR0_National (0x2 << 4) /* National Microwire */ ++#define SSCR0_ECS (1 << 6) /* External clock select */ ++#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ ++#if defined(CONFIG_PXA25x) ++#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ ++#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ ++#elif defined(CONFIG_PXA27x) ++#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ ++#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ ++#define SSCR0_EDSS (1 << 20) /* Extended data size select */ ++#define SSCR0_NCS (1 << 21) /* Network clock select */ ++#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ ++#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ ++#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ ++#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ ++#define SSCR0_ADC (1 << 30) /* Audio clock select */ ++#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ ++#endif ++ ++#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ ++#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ ++#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ ++#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ ++#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ ++#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ ++#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ ++#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ ++#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ ++#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ ++ ++#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ ++#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ ++#define SSSR_BSY (1 << 4) /* SSP Busy */ ++#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ ++#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ ++#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ ++ ++#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ ++#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ ++#define SSCR0_NCS (1 << 21) /* Network Clock Select */ ++#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ ++ ++/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ ++#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ ++#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ ++#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ ++#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ ++#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ ++#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ ++#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ ++#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ ++#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ ++#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ ++#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ ++#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ ++#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ ++#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ ++#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ ++#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ ++#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ ++#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ ++#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ ++ ++#define SSSR_BCE (1 << 23) /* Bit Count Error */ ++#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ ++#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ ++#define SSSR_EOC (1 << 20) /* End Of Chain */ ++#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ ++#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ ++ ++#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ ++#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ ++#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ ++#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ ++#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ ++#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ ++#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ ++#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ ++#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ ++ ++#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ ++#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ ++#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ ++ ++#endif /* __ASM_ARCH_REGS_SSP_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/sharpsl.h linux-2.6.25-rc4/include/asm-arm/arch/sharpsl.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/sharpsl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/sharpsl.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,34 @@ ++/* ++ * SharpSL SSP Driver ++ */ ++ ++unsigned long corgi_ssp_ads7846_putget(unsigned long); ++unsigned long corgi_ssp_ads7846_get(void); ++void corgi_ssp_ads7846_put(unsigned long data); ++void corgi_ssp_ads7846_lock(void); ++void corgi_ssp_ads7846_unlock(void); ++void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data); ++void corgi_ssp_blduty_set(int duty); ++int corgi_ssp_max1111_get(unsigned long data); ++ ++/* ++ * SharpSL Touchscreen Driver ++ */ ++ ++struct corgits_machinfo { ++ unsigned long (*get_hsync_invperiod)(void); ++ void (*put_hsync)(void); ++ void (*wait_hsync)(void); ++}; ++ ++ ++/* ++ * SharpSL Backlight ++ */ ++extern void corgibl_limit_intensity(int limit); ++ ++ ++/* ++ * SharpSL Battery/PM Driver ++ */ ++extern void sharpsl_battery_kick(void); +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/spitz.h linux-2.6.25-rc4/include/asm-arm/arch/spitz.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/spitz.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/spitz.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,158 @@ ++/* ++ * Hardware specific definitions for SL-Cx000 series of PDAs ++ * ++ * Copyright (c) 2005 Alexander Wykes ++ * Copyright (c) 2005 Richard Purdie ++ * ++ * Based on Sharp's 2.4 kernel patches ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef __ASM_ARCH_SPITZ_H ++#define __ASM_ARCH_SPITZ_H 1 ++#endif ++ ++#include <linux/fb.h> ++ ++/* Spitz/Akita GPIOs */ ++ ++#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ ++#define SPITZ_GPIO_RESET (1) ++#define SPITZ_GPIO_nSD_DETECT (9) ++#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */ ++#define SPITZ_GPIO_AK_INT (13) /* Remote Control */ ++#define SPITZ_GPIO_ADS7846_CS (14) ++#define SPITZ_GPIO_SYNC (16) ++#define SPITZ_GPIO_MAX1111_CS (20) ++#define SPITZ_GPIO_FATAL_BAT (21) ++#define SPITZ_GPIO_HSYNC (22) ++#define SPITZ_GPIO_nSD_CLK (32) ++#define SPITZ_GPIO_USB_DEVICE (35) ++#define SPITZ_GPIO_USB_HOST (37) ++#define SPITZ_GPIO_USB_CONNECT (41) ++#define SPITZ_GPIO_LCDCON_CS (53) ++#define SPITZ_GPIO_nPCE (54) ++#define SPITZ_GPIO_nSD_WP (81) ++#define SPITZ_GPIO_ON_RESET (89) ++#define SPITZ_GPIO_BAT_COVER (90) ++#define SPITZ_GPIO_CF_CD (94) ++#define SPITZ_GPIO_ON_KEY (95) ++#define SPITZ_GPIO_SWA (97) ++#define SPITZ_GPIO_SWB (96) ++#define SPITZ_GPIO_CHRG_FULL (101) ++#define SPITZ_GPIO_CO (101) ++#define SPITZ_GPIO_CF_IRQ (105) ++#define SPITZ_GPIO_AC_IN (115) ++#define SPITZ_GPIO_HP_IN (116) ++ ++/* Spitz Only GPIOs */ ++ ++#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ ++#define SPITZ_GPIO_CF2_CD (93) ++ ++ ++/* Spitz/Akita Keyboard Definitions */ ++ ++#define SPITZ_KEY_STROBE_NUM (11) ++#define SPITZ_KEY_SENSE_NUM (7) ++#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 ++#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 ++#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 ++#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 ++#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 ++#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 ++#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 ++#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 ++ ++#define SPITZ_GPIO_KEY_STROBE0 88 ++#define SPITZ_GPIO_KEY_STROBE1 23 ++#define SPITZ_GPIO_KEY_STROBE2 24 ++#define SPITZ_GPIO_KEY_STROBE3 25 ++#define SPITZ_GPIO_KEY_STROBE4 26 ++#define SPITZ_GPIO_KEY_STROBE5 27 ++#define SPITZ_GPIO_KEY_STROBE6 52 ++#define SPITZ_GPIO_KEY_STROBE7 103 ++#define SPITZ_GPIO_KEY_STROBE8 107 ++#define SPITZ_GPIO_KEY_STROBE9 108 ++#define SPITZ_GPIO_KEY_STROBE10 114 ++ ++#define SPITZ_GPIO_KEY_SENSE0 12 ++#define SPITZ_GPIO_KEY_SENSE1 17 ++#define SPITZ_GPIO_KEY_SENSE2 91 ++#define SPITZ_GPIO_KEY_SENSE3 34 ++#define SPITZ_GPIO_KEY_SENSE4 36 ++#define SPITZ_GPIO_KEY_SENSE5 38 ++#define SPITZ_GPIO_KEY_SENSE6 39 ++ ++ ++/* Spitz Scoop Device (No. 1) GPIOs */ ++/* Suspend States in comments */ ++#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */ ++#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */ ++#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */ ++#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */ ++#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */ ++#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */ ++#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */ ++#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ ++#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ ++ ++#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ ++ SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ ++ SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) ++#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) ++#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) ++#define SPITZ_SCP_SUS_SET 0 ++ ++/* Spitz Scoop Device (No. 2) GPIOs */ ++/* Suspend States in comments */ ++#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ ++#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */ ++#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ ++#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ ++#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ ++#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ ++#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */ ++#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ ++#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ ++ ++#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ ++ SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ ++ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) ++ ++#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) ++#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ ++ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) ++#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) ++ ++ ++/* Spitz IRQ Definitions */ ++ ++#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) ++#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) ++#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) ++#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) ++#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) ++#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) ++#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) ++#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) ++#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) ++#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) ++#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) ++#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) ++#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) ++#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) ++#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) ++#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) ++#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) ++ ++/* ++ * Shared data structures ++ */ ++extern struct platform_device spitzscoop_device; ++extern struct platform_device spitzscoop2_device; ++extern struct platform_device spitzssp_device; ++extern struct sharpsl_charger_machinfo spitz_pm_machinfo; +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/ssp.h linux-2.6.25-rc4/include/asm-arm/arch/ssp.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/ssp.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/ssp.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,83 @@ ++/* ++ * ssp.h ++ * ++ * Copyright (C) 2003 Russell King, All Rights Reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This driver supports the following PXA CPU/SSP ports:- ++ * ++ * PXA250 SSP ++ * PXA255 SSP, NSSP ++ * PXA26x SSP, NSSP, ASSP ++ * PXA27x SSP1, SSP2, SSP3 ++ * PXA3xx SSP1, SSP2, SSP3, SSP4 ++ */ ++ ++#ifndef __ASM_ARCH_SSP_H ++#define __ASM_ARCH_SSP_H ++ ++#include <linux/list.h> ++ ++enum pxa_ssp_type { ++ SSP_UNDEFINED = 0, ++ PXA25x_SSP, /* pxa 210, 250, 255, 26x */ ++ PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ ++ PXA27x_SSP, ++}; ++ ++struct ssp_device { ++ struct platform_device *pdev; ++ struct list_head node; ++ ++ struct clk *clk; ++ void __iomem *mmio_base; ++ unsigned long phys_base; ++ ++ const char *label; ++ int port_id; ++ int type; ++ int use_count; ++ int irq; ++ int drcmr_rx; ++ int drcmr_tx; ++}; ++ ++/* ++ * SSP initialisation flags ++ */ ++#define SSP_NO_IRQ 0x1 /* don't register an irq handler in SSP driver */ ++ ++struct ssp_state { ++ u32 cr0; ++ u32 cr1; ++ u32 to; ++ u32 psp; ++}; ++ ++struct ssp_dev { ++ struct ssp_device *ssp; ++ u32 port; ++ u32 mode; ++ u32 flags; ++ u32 psp_flags; ++ u32 speed; ++ int irq; ++}; ++ ++int ssp_write_word(struct ssp_dev *dev, u32 data); ++int ssp_read_word(struct ssp_dev *dev, u32 *data); ++int ssp_flush(struct ssp_dev *dev); ++void ssp_enable(struct ssp_dev *dev); ++void ssp_disable(struct ssp_dev *dev); ++void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp); ++void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp); ++int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); ++int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); ++void ssp_exit(struct ssp_dev *dev); ++ ++struct ssp_device *ssp_request(int port, const char *label); ++void ssp_free(struct ssp_device *); ++#endif /* __ASM_ARCH_SSP_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/system.h linux-2.6.25-rc4/include/asm-arm/arch/system.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/system.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/system.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,35 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/system.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Jun 15, 2001 ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <asm/proc-fns.h> ++#include "hardware.h" ++#include "pxa-regs.h" ++ ++static inline void arch_idle(void) ++{ ++ cpu_do_idle(); ++} ++ ++ ++static inline void arch_reset(char mode) ++{ ++ if (mode == 's') { ++ /* Jump into ROM at address 0 */ ++ cpu_reset(0); ++ } else { ++ /* Initialize the watchdog and let it fire */ ++ OWER = OWER_WME; ++ OSSR = OSSR_M3; ++ OSMR3 = OSCR + 368640; /* ... in 100 ms */ ++ } ++} ++ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/timex.h linux-2.6.25-rc4/include/asm-arm/arch/timex.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/timex.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/timex.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,26 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/timex.h ++ * ++ * Author: Nicolas Pitre ++ * Created: Jun 15, 2001 ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++#if defined(CONFIG_PXA25x) ++/* PXA250/210 timer base */ ++#define CLOCK_TICK_RATE 3686400 ++#elif defined(CONFIG_PXA27x) ++/* PXA27x timer base */ ++#ifdef CONFIG_MACH_MAINSTONE ++#define CLOCK_TICK_RATE 3249600 ++#else ++#define CLOCK_TICK_RATE 3250000 ++#endif ++#else ++#define CLOCK_TICK_RATE 3250000 ++#endif +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/tosa.h linux-2.6.25-rc4/include/asm-arm/arch/tosa.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/tosa.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/tosa.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,196 @@ ++/* ++ * Hardware specific definitions for Sharp SL-C6000x series of PDAs ++ * ++ * Copyright (c) 2005 Dirk Opfer ++ * ++ * Based on Sharp's 2.4 kernel patches ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef _ASM_ARCH_TOSA_H_ ++#define _ASM_ARCH_TOSA_H_ 1 ++ ++/* TOSA Chip selects */ ++#define TOSA_LCDC_PHYS PXA_CS4_PHYS ++/* Internel Scoop */ ++#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000) ++/* Jacket Scoop */ ++#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) ++ ++/* ++ * SCOOP2 internal GPIOs ++ */ ++#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 ++#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 ++#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13 ++#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14 ++#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15 ++#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 ++#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 ++#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 ++#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 ++ ++/* GPIO Direction 1 : output mode / 0:input mode */ ++#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ ++ TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\ ++ TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) ++/* GPIO out put level when init 1: Hi */ ++#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) ++ ++/* ++ * SCOOP2 jacket GPIOs ++ */ ++#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 ++#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 ++#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 ++#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14 ++#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 ++#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 ++#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 ++#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18 ++#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 ++ ++/* GPIO Direction 1 : output mode / 0:input mode */ ++#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ ++ TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \ ++ TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ ++ TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) ++/* GPIO out put level when init 1: Hi */ ++#define TOSA_SCOOP_JC_IO_OUT ( 0 ) ++ ++/* ++ * Timing Generator ++ */ ++#define TG_PNLCTL 0x00 ++#define TG_TPOSCTL 0x01 ++#define TG_DUTYCTL 0x02 ++#define TG_GPOSR 0x03 ++#define TG_GPODR1 0x04 ++#define TG_GPODR2 0x05 ++#define TG_PINICTL 0x06 ++#define TG_HPOSCTL 0x07 ++ ++/* ++ * LED ++ */ ++#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11 ++#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12 ++#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13 ++#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18 ++ ++ ++/* ++ * PXA GPIOs ++ */ ++#define TOSA_GPIO_POWERON (0) ++#define TOSA_GPIO_RESET (1) ++#define TOSA_GPIO_AC_IN (2) ++#define TOSA_GPIO_RECORD_BTN (3) ++#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */ ++#define TOSA_GPIO_USB_IN (5) ++#define TOSA_GPIO_JACKET_DETECT (7) ++#define TOSA_GPIO_nSD_DETECT (9) ++#define TOSA_GPIO_nSD_INT (10) ++#define TOSA_GPIO_TC6393_CLK (11) ++#define TOSA_GPIO_BAT1_CRG (12) ++#define TOSA_GPIO_CF_CD (13) ++#define TOSA_GPIO_BAT0_CRG (14) ++#define TOSA_GPIO_TC6393_INT (15) ++#define TOSA_GPIO_BAT0_LOW (17) ++#define TOSA_GPIO_TC6393_RDY (18) ++#define TOSA_GPIO_ON_RESET (19) ++#define TOSA_GPIO_EAR_IN (20) ++#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ ++#define TOSA_GPIO_ON_KEY (22) ++#define TOSA_GPIO_VGA_LINE (27) ++#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ ++#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ ++#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ ++#define TOSA_GPIO_TG_SPI_SCLK (81) ++#define TOSA_GPIO_TG_SPI_CS (82) ++#define TOSA_GPIO_TG_SPI_MOSI (83) ++#define TOSA_GPIO_BAT1_LOW (84) ++ ++#define TOSA_GPIO_HP_IN GPIO_EAR_IN ++ ++#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW ++ ++#define TOSA_KEY_STROBE_NUM (11) ++#define TOSA_KEY_SENSE_NUM (7) ++ ++#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000) ++#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f) ++#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0) ++#define TOSA_GPIO_ALL_SENSE_RSHIFT (5) ++#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a)) ++#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a)) ++#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000) ++#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff) ++#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00) ++#define TOSA_GPIO_KEY_SENSE(a) (69+(a)) ++#define TOSA_GPIO_KEY_STROBE(a) (58+(a)) ++ ++/* ++ * Interrupts ++ */ ++#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) ++#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) ++#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) ++#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) ++#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) ++#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) ++#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) ++#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) ++#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) ++#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) ++#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) ++#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) ++#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) ++#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) ++#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) ++#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) ++#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) ++#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) ++#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) ++#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) ++#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) ++#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) ++ ++#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) ++ ++extern struct platform_device tosascoop_jc_device; ++extern struct platform_device tosascoop_device; ++ ++#define TOSA_KEY_SYNC KEY_102ND /* ??? */ ++ ++ ++#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES ++#define TOSA_KEY_RECORD KEY_YEN ++#define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA ++#define TOSA_KEY_CANCEL KEY_ESC ++#define TOSA_KEY_CENTER KEY_HIRAGANA ++#define TOSA_KEY_OK KEY_HENKAN ++#define TOSA_KEY_CALENDAR KEY_KATAKANAHIRAGANA ++#define TOSA_KEY_HOMEPAGE KEY_HANGEUL ++#define TOSA_KEY_LIGHT KEY_MUHENKAN ++#define TOSA_KEY_MENU KEY_HANJA ++#define TOSA_KEY_FN KEY_RIGHTALT ++#define TOSA_KEY_MAIL KEY_ZENKAKUHANKAKU ++#else ++#define TOSA_KEY_RECORD KEY_RECORD ++#define TOSA_KEY_ADDRESSBOOK KEY_ADDRESSBOOK ++#define TOSA_KEY_CANCEL KEY_CANCEL ++#define TOSA_KEY_CENTER KEY_SELECT /* ??? */ ++#define TOSA_KEY_OK KEY_OK ++#define TOSA_KEY_CALENDAR KEY_CALENDAR ++#define TOSA_KEY_HOMEPAGE KEY_HOMEPAGE ++#define TOSA_KEY_LIGHT KEY_KBDILLUMTOGGLE ++#define TOSA_KEY_MENU KEY_MENU ++#define TOSA_KEY_FN KEY_FN ++#define TOSA_KEY_MAIL KEY_MAIL ++#endif ++ ++#endif /* _ASM_ARCH_TOSA_H_ */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/trizeps4.h linux-2.6.25-rc4/include/asm-arm/arch/trizeps4.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/trizeps4.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/trizeps4.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,106 @@ ++/************************************************************************ ++ * Include file for TRIZEPS4 SoM and ConXS eval-board ++ * Copyright (c) Jürgen Schindele ++ * 2006 ++ ************************************************************************/ ++ ++/* ++ * Includes/Defines ++ */ ++#ifndef _TRIPEPS4_H_ ++#define _TRIPEPS4_H_ ++ ++/* physical memory regions */ ++#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ ++#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */ ++#define TRIZEPS4_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ ++#define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */ ++#define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */ ++ ++#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */ ++#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */ ++#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/ ++#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/ ++#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/ ++ ++/* virtual memory regions */ ++#define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */ ++ ++#define TRIZEPS4_PIC_VIRT 0xF0100000 /* not used */ ++#define TRIZEPS4_CFSR_VIRT 0xF0100000 ++#define TRIZEPS4_BOCR_VIRT 0xF0200000 ++#define TRIZEPS4_DICR_VIRT 0xF0300000 ++#define TRIZEPS4_IRCR_VIRT 0xF0400000 ++#define TRIZEPS4_UPSR_VIRT 0xF0500000 ++ ++/* size of flash */ ++#define TRIZEPS4_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ ++ ++/* Ethernet Controller Davicom DM9000 */ ++#define GPIO_DM9000 101 ++#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000) ++ ++/* UCB1400 audio / TS-controller */ ++#define GPIO_UCB1400 1 ++#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400) ++ ++/* PCMCIA socket Compact Flash */ ++#define GPIO_PCD 11 /* PCMCIA Card Detect */ ++#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD) ++#define GPIO_PRDY 13 /* READY / nINT */ ++#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY) ++ ++/* MMC socket */ ++#define GPIO_MMC_DET 12 ++#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) ++ ++/* LEDS using tx2 / rx2 */ ++#define GPIO_SYS_BUSY_LED 46 ++#define GPIO_HEARTBEAT_LED 47 ++ ++/* Off-module PIC on ConXS board */ ++#define GPIO_PIC 0 ++#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) ++ ++#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT) ++#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS) ++ ++#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT) ++#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS) ++ ++#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT) ++#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS) ++ ++#ifndef __ASSEMBLY__ ++#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000))) ++#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000))) ++#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000))) ++#else ++#define ConXS_CFSR CFSR_P2V(0x0C000000) ++#define ConXS_BCR BCR_P2V(0x0E000000) ++#define ConXS_DCR DCR_P2V(0x0F800000) ++#endif ++ ++#define ConXS_CFSR_BVD_MASK 0x0003 ++#define ConXS_CFSR_BVD1 (1 << 0) ++#define ConXS_CFSR_BVD2 (1 << 1) ++#define ConXS_CFSR_VS_MASK 0x000C ++#define ConXS_CFSR_VS1 (1 << 2) ++#define ConXS_CFSR_VS2 (1 << 3) ++#define ConXS_CFSR_VS_5V (0x3 << 2) ++#define ConXS_CFSR_VS_3V3 0x0 ++ ++#define ConXS_BCR_S0_POW_EN0 (1 << 0) ++#define ConXS_BCR_S0_POW_EN1 (1 << 1) ++#define ConXS_BCR_L_DISP (1 << 4) ++#define ConXS_BCR_CF_BUF_EN (1 << 5) ++#define ConXS_BCR_CF_RESET (1 << 7) ++#define ConXS_BCR_S0_VCC_3V3 0x1 ++#define ConXS_BCR_S0_VCC_5V0 0x2 ++#define ConXS_BCR_S0_VPP_12V 0x4 ++#define ConXS_BCR_S0_VPP_3V3 0x8 ++ ++#define ConXS_IRCR_MODE (1 << 0) ++#define ConXS_IRCR_SD (1 << 1) ++ ++#endif /* _TRIPEPS4_H_ */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/udc.h linux-2.6.25-rc4/include/asm-arm/arch/udc.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/udc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/udc.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,8 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/udc.h ++ * ++ */ ++#include <asm/mach/udc_pxa2xx.h> ++ ++extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); ++ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/uncompress.h linux-2.6.25-rc4/include/asm-arm/arch/uncompress.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/uncompress.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/uncompress.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,40 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/uncompress.h ++ * ++ * Author: Nicolas Pitre ++ * Copyright: (C) 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/serial_reg.h> ++#include <asm/arch/pxa-regs.h> ++ ++#define __REG(x) ((volatile unsigned long *)x) ++ ++#define UART FFUART ++ ++ ++static inline void putc(char c) ++{ ++ if (!(UART[UART_IER] & IER_UUE)) ++ return; ++ while (!(UART[UART_LSR] & LSR_TDRQ)) ++ barrier(); ++ UART[UART_TX] = c; ++} ++ ++/* ++ * This does not append a newline ++ */ ++static inline void flush(void) ++{ ++} ++ ++/* ++ * nothing to do ++ */ ++#define arch_decomp_setup() ++#define arch_decomp_wdog() +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/vmalloc.h linux-2.6.25-rc4/include/asm-arm/arch/vmalloc.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/vmalloc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/vmalloc.h 2008-02-26 01:20:20.000000000 +0100 +@@ -0,0 +1,11 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/vmalloc.h ++ * ++ * Author: Nicolas Pitre ++ * Copyright: (C) 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#define VMALLOC_END (0xe8000000) +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch/zylonite.h linux-2.6.25-rc4/include/asm-arm/arch/zylonite.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch/zylonite.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch/zylonite.h 2008-03-08 16:11:19.000000000 +0100 +@@ -0,0 +1,44 @@ ++#ifndef __ASM_ARCH_ZYLONITE_H ++#define __ASM_ARCH_ZYLONITE_H ++ ++#define ZYLONITE_ETH_PHYS 0x14000000 ++ ++#define EXT_GPIO(x) (128 + (x)) ++ ++/* the following variables are processor specific and initialized ++ * by the corresponding zylonite_pxa3xx_init() ++ */ ++struct platform_mmc_slot { ++ int gpio_cd; ++ int gpio_wp; ++}; ++ ++extern struct platform_mmc_slot zylonite_mmc_slot[]; ++ ++extern int gpio_backlight; ++extern int gpio_eth_irq; ++ ++extern int lcd_id; ++extern int lcd_orientation; ++ ++#ifdef CONFIG_CPU_PXA300 ++extern void zylonite_pxa300_init(void); ++#else ++static inline void zylonite_pxa300_init(void) ++{ ++ if (cpu_is_pxa300() || cpu_is_pxa310()) ++ panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__); ++} ++#endif ++ ++#ifdef CONFIG_CPU_PXA320 ++extern void zylonite_pxa320_init(void); ++#else ++static inline void zylonite_pxa320_init(void) ++{ ++ if (cpu_is_pxa320()) ++ panic("%s: PXA320 not supported\n", __FUNCTION__); ++} ++#endif ++ ++#endif /* __ASM_ARCH_ZYLONITE_H */ +diff -NbBur linux-2.6.25-rc4-orig/include/asm-arm/arch-pxa/pxa27x_keypad.h linux-2.6.25-rc4/include/asm-arm/arch-pxa/pxa27x_keypad.h +--- linux-2.6.25-rc4-orig/include/asm-arm/arch-pxa/pxa27x_keypad.h 2008-03-08 18:26:06.000000000 +0100 ++++ linux-2.6.25-rc4/include/asm-arm/arch-pxa/pxa27x_keypad.h 2008-03-08 16:22:35.000000000 +0100 +@@ -53,4 +53,6 @@ + + #define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) + ++extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); ++ + #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ + diff --git a/packages/linux/linux-mainstone/mainstone/.mtn2git_empty b/packages/linux/linux-mainstone/mainstone/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-mainstone/mainstone/.mtn2git_empty diff --git a/packages/linux/linux-mainstone/mainstone/defconfig b/packages/linux/linux-mainstone/mainstone/defconfig new file mode 100644 index 0000000000..cbea28d485 --- /dev/null +++ b/packages/linux/linux-mainstone/mainstone/defconfig @@ -0,0 +1,1608 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc4 +# Sat Mar 8 18:03:28 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +CONFIG_MACH_MAINSTONE=y +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=m + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mem=64M console=ttyS0 debug " +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +# CONFIG_IPV6_ROUTE_INFO is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +# CONFIG_IRLAN is not set +# CONFIG_IRNET is not set +# CONFIG_IRCOMM is not set +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_PXA_FICP is not set +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +# CONFIG_BT_L2CAP is not set +# CONFIG_BT_SCO is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_IDE_PROC_FS is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_PCMCIA_RAYCS=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +# CONFIG_LIBERTAS_CS is not set +# CONFIG_LIBERTAS_SDIO is not set +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_ATMEL=m +CONFIG_PCMCIA_ATMEL=m +CONFIG_AIRO_CS=m +CONFIG_PCMCIA_WL3501=m +CONFIG_USB_ZD1201=m +# CONFIG_USB_NET_RNDIS_WLAN is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_CS=m + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_APMPOWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_UCB1400=y +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +CONFIG_CARDMAN_4000=m +CONFIG_CARDMAN_4040=m +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# +CONFIG_I2C_GPIO=m +CONFIG_I2C_PXA=y +CONFIG_I2C_PXA_SLAVE=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +CONFIG_W1_SLAVE_DS2760=y +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=y +CONFIG_APM_POWER=y +CONFIG_BATTERY_DS2760=y +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=y +CONFIG_SND_PXA2XX_AC97=y + +# +# SPI devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +CONFIG_USB_GADGET_DUMMY_HCD=y +CONFIG_USB_DUMMY_HCD=m +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=m +# CONFIG_MMC_SPI is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +CONFIG_LEDS_GPIO=m + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-mainstone_2.6.25-rc4.bb b/packages/linux/linux-mainstone_2.6.25-rc4.bb new file mode 100644 index 0000000000..fd5c30e37f --- /dev/null +++ b/packages/linux/linux-mainstone_2.6.25-rc4.bb @@ -0,0 +1,25 @@ +require linux.inc + +SECTION = "kernel" +DESCRIPTION = "Linux kernel for the Mainstone (PXA270 ref design)" +LICENSE = "GPL" +PR = "r0" + +SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2 \ + ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/patch-2.6.25-rc4.bz2;patch=1 \ + file://mainstone-keypad.patch;patch=1 \ + file://defconfig" + +S = "${WORKDIR}/linux-2.6.24" + +COMPATIBLE_HOST = 'arm.*-linux' + +ARCH = "arm" + +CMDLINE_CONSOLE ?= "ttyS0,115200n8" +#CMDLINE_ROOT = "root=/dev/slug rootfstype=ext2,jffs2 initrd=0x01000000,10M mem=32M@0x00000000" +#CMDLINE_ROOT = "root=/dev/ram0 rw rootfstype=ext2,jffs2 initrd=0x01000000,10M init=/linuxrc mem=32M@0x00000000" +CMDLINE_ROOT = "root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mem=64M" +CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_CONSOLE}" + +COMPATIBLE_MACHINE = "mainstone" diff --git a/packages/linux/linux-rp-2.6.24/htcuni.patch b/packages/linux/linux-rp-2.6.24/htcuni.patch index aa08ca4691..8448c4ec06 100644 --- a/packages/linux/linux-rp-2.6.24/htcuni.patch +++ b/packages/linux/linux-rp-2.6.24/htcuni.patch @@ -60,7 +60,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/Makefile =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/Makefile 2008-02-24 02:40:56.640036018 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/Makefile 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,19 @@ +# +# Makefile for HTC Universal @@ -84,7 +84,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/Makefile Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal.c 2008-02-24 02:40:56.644036684 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,468 @@ +/* + * Hardware definitions for HTC Universal @@ -557,7 +557,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c 2008-02-24 02:40:56.644036684 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,917 @@ +/* + * Audio support for codec Asahi Kasei AK4641 @@ -1479,7 +1479,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h 2008-02-24 02:40:56.644036684 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,65 @@ +/* + * Audio support for codec Asahi Kasei AK4641 @@ -1549,7 +1549,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c 2008-02-24 02:40:56.644036684 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,143 @@ +/* + * LEDs support for the HP iPaq hx4700 @@ -1697,7 +1697,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c 2008-02-24 02:40:56.644036684 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,61 @@ +/* + * Use consistent with the GNU GPL is permitted, @@ -1763,7 +1763,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c 2008-02-24 02:40:56.644036684 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,135 @@ +/* Bluetooth interface driver for TI BRF6150 on HX4700 + * @@ -1903,7 +1903,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h 2008-02-24 02:40:56.644036684 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,17 @@ +/* + * Bluetooth support file for calling bluetooth configuration functions @@ -1925,7 +1925,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c 2008-02-24 02:40:56.644036684 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,87 @@ +/* + * Buttons driver for HTC Universal @@ -2017,7 +2017,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,226 @@ +/* Core Hardware driver for Hx4700 (Serial, ASIC3, EGPIOs) + * @@ -2248,7 +2248,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,212 @@ +/* + * Use consistent with the GNU GPL is permitted, @@ -2465,7 +2465,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,167 @@ + +/* Phone interface driver for Qualcomm MSM6250 on HTC Universal @@ -2637,7 +2637,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,16 @@ +/* + * Bluetooth support file for calling bluetooth configuration functions @@ -2658,7 +2658,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,69 @@ +/* + * MyPal 716 power management support for the original HTC IPL in DoC G3 @@ -2732,7 +2732,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,97 @@ +/* + * pda_power driver for HTC Universal @@ -2834,7 +2834,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,490 @@ +/* Touch screen driver for the TI something-or-other + * @@ -3329,7 +3329,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,71 @@ + +/* @@ -3405,7 +3405,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h 2008-02-24 02:40:56.648035744 +0300 ++++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,20 @@ +/* + * temporary TSC2046 touchscreen hack @@ -3429,9 +3429,9 @@ Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h +#endif Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig =================================================================== ---- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig 2008-02-24 02:40:23.789035215 +0300 -+++ linux-2.6.24/arch/arm/mach-pxa/Kconfig 2008-02-24 02:40:56.652035294 +0300 -@@ -92,6 +92,14 @@ config PXA_SHARPSL_27x +--- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig 2008-03-10 16:08:01.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-pxa/Kconfig 2008-03-10 16:09:23.000000000 +0000 +@@ -92,6 +92,14 @@ bool "Sharp PXA270 models (SL-Cxx00)" select PXA27x @@ -3446,7 +3446,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig endchoice endif -@@ -111,6 +119,86 @@ endchoice +@@ -111,6 +119,86 @@ endif @@ -3533,17 +3533,17 @@ Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig endmenu config MACH_POODLE -@@ -196,4 +284,3 @@ config PXA_KEYS +@@ -196,4 +284,3 @@ depends on (PXA25x || PXA27x) && INPUT endif - Index: linux-2.6.24/arch/arm/mach-pxa/Makefile =================================================================== ---- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile 2008-02-24 02:40:23.797034872 +0300 -+++ linux-2.6.24/arch/arm/mach-pxa/Makefile 2008-02-24 02:40:56.652035294 +0300 -@@ -23,6 +23,7 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o co - obj-$(CONFIG_MACH_TOSA) += tosa.o tosa_power.o +--- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile 2008-03-10 16:08:01.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-pxa/Makefile 2008-03-10 16:09:23.000000000 +0000 +@@ -23,6 +23,7 @@ + obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_HX2750) += hx2750.o hx2750_test.o +obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal/ @@ -3552,9 +3552,9 @@ Index: linux-2.6.24/arch/arm/mach-pxa/Makefile obj-y += zylonite.o Index: linux-2.6.24/drivers/leds/Kconfig =================================================================== ---- linux-2.6.24.orig/drivers/leds/Kconfig 2008-02-24 02:40:23.817034852 +0300 -+++ linux-2.6.24/drivers/leds/Kconfig 2008-02-24 02:40:56.652035294 +0300 -@@ -114,6 +114,13 @@ config LEDS_CM_X270 +--- linux-2.6.24.orig/drivers/leds/Kconfig 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/drivers/leds/Kconfig 2008-03-10 16:09:23.000000000 +0000 +@@ -114,6 +114,13 @@ help This option enables support for the CM-X270 LEDs. @@ -3571,7 +3571,7 @@ Index: linux-2.6.24/drivers/leds/Kconfig Index: linux-2.6.24/drivers/leds/leds-asic3.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/drivers/leds/leds-asic3.c 2008-02-24 02:40:56.652035294 +0300 ++++ linux-2.6.24/drivers/leds/leds-asic3.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,189 @@ +/* + * LEDs support for HTC ASIC3 devices. @@ -3764,9 +3764,9 @@ Index: linux-2.6.24/drivers/leds/leds-asic3.c +MODULE_LICENSE("GPL"); Index: linux-2.6.24/drivers/mfd/Kconfig =================================================================== ---- linux-2.6.24.orig/drivers/mfd/Kconfig 2008-02-24 02:40:23.841034801 +0300 -+++ linux-2.6.24/drivers/mfd/Kconfig 2008-02-24 02:40:56.652035294 +0300 -@@ -43,6 +43,16 @@ config MFD_TSC2101 +--- linux-2.6.24.orig/drivers/mfd/Kconfig 2008-03-10 16:07:51.000000000 +0000 ++++ linux-2.6.24/drivers/mfd/Kconfig 2008-03-10 16:09:23.000000000 +0000 +@@ -21,6 +21,16 @@ help Support for TI TSC2101 Touchscreen and Audio Codec @@ -3785,8 +3785,8 @@ Index: linux-2.6.24/drivers/mfd/Kconfig menu "Multimedia Capabilities Port drivers" Index: linux-2.6.24/drivers/mfd/Makefile =================================================================== ---- linux-2.6.24.orig/drivers/mfd/Makefile 2008-02-24 02:40:23.849034737 +0300 -+++ linux-2.6.24/drivers/mfd/Makefile 2008-02-24 02:40:56.652035294 +0300 +--- linux-2.6.24.orig/drivers/mfd/Makefile 2008-03-10 16:07:51.000000000 +0000 ++++ linux-2.6.24/drivers/mfd/Makefile 2008-03-10 16:09:23.000000000 +0000 @@ -2,6 +2,8 @@ # Makefile for multifunction miscellaneous devices # @@ -3795,11 +3795,11 @@ Index: linux-2.6.24/drivers/mfd/Makefile + obj-$(CONFIG_MFD_SM501) += sm501.o - obj-$(CONFIG_MFD_CORE) += mfd-core.o + obj-$(CONFIG_MCP) += mcp-core.o Index: linux-2.6.24/drivers/mfd/asic3_base.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/drivers/mfd/asic3_base.c 2008-02-24 02:40:56.652035294 +0300 ++++ linux-2.6.24/drivers/mfd/asic3_base.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,1208 @@ +/* + * Driver interface to HTC "ASIC3" @@ -5012,7 +5012,7 @@ Index: linux-2.6.24/drivers/mfd/asic3_base.c Index: linux-2.6.24/drivers/mfd/soc-core.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/drivers/mfd/soc-core.c 2008-02-24 02:40:56.652035294 +0300 ++++ linux-2.6.24/drivers/mfd/soc-core.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,106 @@ +/* + * drivers/soc/soc-core.c @@ -5123,7 +5123,7 @@ Index: linux-2.6.24/drivers/mfd/soc-core.c Index: linux-2.6.24/drivers/mfd/soc-core.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/drivers/mfd/soc-core.h 2008-02-24 02:40:56.652035294 +0300 ++++ linux-2.6.24/drivers/mfd/soc-core.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,30 @@ +/* + * drivers/soc/soc-core.h @@ -5158,7 +5158,7 @@ Index: linux-2.6.24/drivers/mfd/soc-core.h Index: linux-2.6.24/include/asm-arm/arch-pxa/clock.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/clock.h 2008-02-24 02:40:56.656035541 +0300 ++++ linux-2.6.24/include/asm-arm/arch-pxa/clock.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,27 @@ +/* + * linux/include/asm-arm/arch-pxa/clock.h @@ -5190,7 +5190,7 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/clock.h Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-asic.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-asic.h 2008-02-24 02:40:56.656035541 +0300 ++++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-asic.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,213 @@ +/* + * include/asm/arm/arch-pxa/htcuniversal-asic.h @@ -5408,7 +5408,7 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-asic.h Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-gpio.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-gpio.h 2008-02-24 02:40:56.656035541 +0300 ++++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-gpio.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,220 @@ +/* + * include/asm-arm/arch-pxa/htcuniversal-gpio.h @@ -5633,7 +5633,7 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-gpio.h Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-init.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-init.h 2008-02-24 02:40:56.656035541 +0300 ++++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-init.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,14 @@ +/* + * include/asm/arm/arch-pxa/htcuniversal-init.h @@ -5652,7 +5652,7 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-init.h Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal.h 2008-02-24 02:40:56.656035541 +0300 ++++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,3 @@ +#include <asm/arch/irqs.h> + @@ -5660,7 +5660,7 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal.h Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-pm_ll.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-pm_ll.h 2008-02-24 02:40:56.656035541 +0300 ++++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-pm_ll.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,6 @@ +struct pxa_ll_pm_ops { + void (*suspend)(unsigned long); @@ -5671,7 +5671,7 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-pm_ll.h Index: linux-2.6.24/include/asm-arm/hardware/asic3_keys.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/hardware/asic3_keys.h 2008-02-24 02:40:56.660035858 +0300 ++++ linux-2.6.24/include/asm-arm/hardware/asic3_keys.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,18 @@ +#include <linux/input.h> + @@ -5694,7 +5694,7 @@ Index: linux-2.6.24/include/asm-arm/hardware/asic3_keys.h Index: linux-2.6.24/include/asm-arm/hardware/asic3_leds.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/hardware/asic3_leds.h 2008-02-24 02:40:56.660035858 +0300 ++++ linux-2.6.24/include/asm-arm/hardware/asic3_leds.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,34 @@ +/* + * LEDs support for HTC ASIC3 devices. @@ -5733,7 +5733,7 @@ Index: linux-2.6.24/include/asm-arm/hardware/asic3_leds.h Index: linux-2.6.24/include/asm-arm/hardware/ipaq-asic3.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/hardware/ipaq-asic3.h 2008-02-24 02:40:56.660035858 +0300 ++++ linux-2.6.24/include/asm-arm/hardware/ipaq-asic3.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,602 @@ +/* + * @@ -6340,7 +6340,7 @@ Index: linux-2.6.24/include/asm-arm/hardware/ipaq-asic3.h Index: linux-2.6.24/include/linux/gpiodev.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/linux/gpiodev.h 2008-02-24 02:40:56.660035858 +0300 ++++ linux-2.6.24/include/linux/gpiodev.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,44 @@ +#ifndef __GPIODEV_H +#define __GPIODEV_H @@ -6389,7 +6389,7 @@ Index: linux-2.6.24/include/linux/gpiodev.h Index: linux-2.6.24/include/linux/input_pda.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/linux/input_pda.h 2008-02-24 02:40:56.660035858 +0300 ++++ linux-2.6.24/include/linux/input_pda.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,47 @@ +#ifndef _INPUT_PDA_H +#define _INPUT_PDA_H @@ -6441,7 +6441,7 @@ Index: linux-2.6.24/include/linux/input_pda.h Index: linux-2.6.24/include/linux/soc/asic3_base.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/linux/soc/asic3_base.h 2008-02-24 02:40:56.660035858 +0300 ++++ linux-2.6.24/include/linux/soc/asic3_base.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,104 @@ +#include <asm/types.h> +#include <linux/gpiodev.h> @@ -6550,7 +6550,7 @@ Index: linux-2.6.24/include/linux/soc/asic3_base.h Index: linux-2.6.24/include/linux/soc/tmio_mmc.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/linux/soc/tmio_mmc.h 2008-02-24 02:40:56.660035858 +0300 ++++ linux-2.6.24/include/linux/soc/tmio_mmc.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,17 @@ +#include <linux/platform_device.h> + @@ -6571,8 +6571,8 @@ Index: linux-2.6.24/include/linux/soc/tmio_mmc.h +}; Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h =================================================================== ---- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h 2008-02-24 02:40:23.965046594 +0300 -+++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h 2008-02-24 02:40:56.664035757 +0300 +--- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h 2008-03-10 16:07:59.000000000 +0000 ++++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h 2008-03-10 16:09:23.000000000 +0000 @@ -2058,6 +2058,8 @@ #define LDCMD_SOFINT (1 << 22) #define LDCMD_EOFINT (1 << 21) @@ -6584,9 +6584,9 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h #define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ Index: linux-2.6.24/drivers/mmc/host/Makefile =================================================================== ---- linux-2.6.24.orig/drivers/mmc/host/Makefile 2008-02-24 02:40:23.885035847 +0300 -+++ linux-2.6.24/drivers/mmc/host/Makefile 2008-02-24 02:40:56.664035757 +0300 -@@ -13,6 +13,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o +--- linux-2.6.24.orig/drivers/mmc/host/Makefile 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/drivers/mmc/host/Makefile 2008-03-10 16:09:23.000000000 +0000 +@@ -13,6 +13,7 @@ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o @@ -6597,7 +6597,7 @@ Index: linux-2.6.24/drivers/mmc/host/Makefile Index: linux-2.6.24/drivers/mmc/host/asic3_mmc.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/drivers/mmc/host/asic3_mmc.c 2008-02-24 02:40:56.664035757 +0300 ++++ linux-2.6.24/drivers/mmc/host/asic3_mmc.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,900 @@ +/* Note that this driver can likely be merged into the tmio driver, so + * consider this code temporary. It works, though. @@ -7502,7 +7502,7 @@ Index: linux-2.6.24/drivers/mmc/host/asic3_mmc.c Index: linux-2.6.24/drivers/mmc/host/asic3_mmc.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/drivers/mmc/host/asic3_mmc.h 2008-02-24 02:40:56.664035757 +0300 ++++ linux-2.6.24/drivers/mmc/host/asic3_mmc.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,25 @@ +#ifndef __ASIC3_MMC_H +#define __ASIC3_MMC_H @@ -7529,22 +7529,10 @@ Index: linux-2.6.24/drivers/mmc/host/asic3_mmc.h +#define DONT_CARE_BUFFER_BITS ( SD_CTRL_INTMASKBUFFER_UNK7 | SD_CTRL_INTMASKBUFFER_CMD_BUSY ) + +#endif // __ASIC3_MMC_H -Index: linux-2.6.24/drivers/input/keyboard/Makefile -=================================================================== ---- linux-2.6.24.orig/drivers/input/keyboard/Makefile 2008-02-24 02:40:23.905037294 +0300 -+++ linux-2.6.24/drivers/input/keyboard/Makefile 2008-02-24 02:40:56.664035757 +0300 -@@ -16,6 +16,7 @@ obj-$(CONFIG_KEYBOARD_STOWAWAY) += stow - obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o - obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o - obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o -+obj-$(CONFIG_KEYBOARD_ASIC3) += asic3_keys.o - obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o - obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o - obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o Index: linux-2.6.24/drivers/input/keyboard/asic3_keys.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/drivers/input/keyboard/asic3_keys.c 2008-02-24 02:40:56.668036144 +0300 ++++ linux-2.6.24/drivers/input/keyboard/asic3_keys.c 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,131 @@ +/* + * Generic buttons driver for ASIC3 SoC. @@ -7679,10 +7667,10 @@ Index: linux-2.6.24/drivers/input/keyboard/asic3_keys.c +MODULE_LICENSE("GPL"); Index: linux-2.6.24/include/asm-arm/arch-pxa/irqs.h =================================================================== ---- linux-2.6.24.orig/include/asm-arm/arch-pxa/irqs.h 2008-02-24 02:40:23.973034657 +0300 -+++ linux-2.6.24/include/asm-arm/arch-pxa/irqs.h 2008-02-24 02:40:56.668036144 +0300 -@@ -183,6 +183,8 @@ - defined(CONFIG_MACH_TOSA) || \ +--- linux-2.6.24.orig/include/asm-arm/arch-pxa/irqs.h 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/include/asm-arm/arch-pxa/irqs.h 2008-03-10 16:09:23.000000000 +0000 +@@ -182,6 +182,8 @@ + defined(CONFIG_MACH_LOGICPD_PXA270) || \ defined(CONFIG_MACH_MAINSTONE) #define NR_IRQS (IRQ_BOARD_END) +#elif defined(CONFIG_MACH_HTCUNIVERSAL) @@ -7693,7 +7681,7 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/irqs.h Index: linux-2.6.24/include/asm-arm/arch-pxa/serial.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/serial.h 2008-02-24 02:40:56.668036144 +0300 ++++ linux-2.6.24/include/asm-arm/arch-pxa/serial.h 2008-03-10 16:09:23.000000000 +0000 @@ -0,0 +1,78 @@ +/* + * linux/include/asm-arm/arch-pxa/serial.h @@ -7775,8 +7763,8 @@ Index: linux-2.6.24/include/asm-arm/arch-pxa/serial.h +void pxa_set_hwuart_info(struct platform_pxa_serial_funcs *hwuart_funcs); Index: linux-2.6.24/drivers/serial/pxa.c =================================================================== ---- linux-2.6.24.orig/drivers/serial/pxa.c 2008-02-24 02:40:23.925046354 +0300 -+++ linux-2.6.24/drivers/serial/pxa.c 2008-02-24 02:40:56.668036144 +0300 +--- linux-2.6.24.orig/drivers/serial/pxa.c 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/drivers/serial/pxa.c 2008-03-10 16:09:23.000000000 +0000 @@ -47,6 +47,7 @@ #include <asm/io.h> #include <asm/hardware.h> @@ -7785,7 +7773,7 @@ Index: linux-2.6.24/drivers/serial/pxa.c #include <asm/arch/pxa-regs.h> -@@ -60,6 +61,14 @@ struct uart_pxa_port { +@@ -60,6 +61,14 @@ char *name; }; @@ -7800,7 +7788,7 @@ Index: linux-2.6.24/drivers/serial/pxa.c static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) { offset <<= 2; -@@ -347,6 +356,9 @@ static int serial_pxa_startup(struct uar +@@ -347,6 +356,9 @@ unsigned long flags; int retval; @@ -7810,7 +7798,7 @@ Index: linux-2.6.24/drivers/serial/pxa.c if (port->line == 3) /* HWUART */ up->mcr |= UART_MCR_AFE; else -@@ -404,6 +416,12 @@ static int serial_pxa_startup(struct uar +@@ -404,6 +416,12 @@ (void) serial_in(up, UART_IIR); (void) serial_in(up, UART_MSR); @@ -7823,7 +7811,7 @@ Index: linux-2.6.24/drivers/serial/pxa.c return 0; } -@@ -412,6 +430,8 @@ static void serial_pxa_shutdown(struct u +@@ -412,6 +430,8 @@ struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned long flags; @@ -7832,7 +7820,7 @@ Index: linux-2.6.24/drivers/serial/pxa.c free_irq(up->port.irq, up); /* -@@ -433,6 +453,8 @@ static void serial_pxa_shutdown(struct u +@@ -433,6 +453,8 @@ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_out(up, UART_FCR, 0); @@ -7843,8 +7831,8 @@ Index: linux-2.6.24/drivers/serial/pxa.c static void Index: linux-2.6.24/arch/arm/mach-pxa/generic.c =================================================================== ---- linux-2.6.24.orig/arch/arm/mach-pxa/generic.c 2008-02-24 02:40:23.809034497 +0300 -+++ linux-2.6.24/arch/arm/mach-pxa/generic.c 2008-02-24 02:40:56.668036144 +0300 +--- linux-2.6.24.orig/arch/arm/mach-pxa/generic.c 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-pxa/generic.c 2008-03-10 16:09:23.000000000 +0000 @@ -38,6 +38,7 @@ #include <asm/arch/mmc.h> #include <asm/arch/irda.h> @@ -7853,7 +7841,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/generic.c #include "devices.h" #include "generic.h" -@@ -412,6 +413,18 @@ struct platform_device pxa_device_hwuart +@@ -412,6 +413,18 @@ .num_resources = ARRAY_SIZE(pxa_resource_hwuart), }; @@ -7874,9 +7862,9 @@ Index: linux-2.6.24/arch/arm/mach-pxa/generic.c .start = 0x40301680, Index: linux-2.6.24/drivers/leds/Makefile =================================================================== ---- linux-2.6.24.orig/drivers/leds/Makefile 2008-02-24 02:40:23.833034725 +0300 -+++ linux-2.6.24/drivers/leds/Makefile 2008-02-24 02:40:56.668036144 +0300 -@@ -15,6 +15,7 @@ obj-$(CONFIG_LEDS_AMS_DELTA) += leds-am +--- linux-2.6.24.orig/drivers/leds/Makefile 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/drivers/leds/Makefile 2008-03-10 16:09:23.000000000 +0000 +@@ -15,6 +15,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o obj-$(CONFIG_LEDS_H1940) += leds-h1940.o @@ -7886,9 +7874,9 @@ Index: linux-2.6.24/drivers/leds/Makefile obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o Index: linux-2.6.24/drivers/input/keyboard/Kconfig =================================================================== ---- linux-2.6.24.orig/drivers/input/keyboard/Kconfig 2008-02-24 02:40:23.917037268 +0300 -+++ linux-2.6.24/drivers/input/keyboard/Kconfig 2008-02-24 02:40:56.676035032 +0300 -@@ -314,4 +314,11 @@ config KEYBOARD_BFIN +--- linux-2.6.24.orig/drivers/input/keyboard/Kconfig 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/drivers/input/keyboard/Kconfig 2008-03-10 16:09:23.000000000 +0000 +@@ -293,4 +293,11 @@ To compile this driver as a module, choose M here: the module will be called bf54x-keys. @@ -7902,16 +7890,31 @@ Index: linux-2.6.24/drivers/input/keyboard/Kconfig endif Index: linux-2.6.24/drivers/mmc/host/Kconfig =================================================================== ---- linux-2.6.24.orig/drivers/mmc/host/Kconfig 2008-02-24 02:41:04.868035778 +0300 -+++ linux-2.6.24/drivers/mmc/host/Kconfig 2008-02-24 02:41:46.328053402 +0300 -@@ -136,3 +136,10 @@ config MMC_TMIO - help - This provides support for the SD/MMC cell found in TC6393XB, - T7L66XB and also ipaq ASIC3 -+ +--- linux-2.6.24.orig/drivers/mmc/host/Kconfig 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/drivers/mmc/host/Kconfig 2008-03-10 16:09:59.000000000 +0000 +@@ -24,6 +24,13 @@ + + If unsure, say N. + +config MMC_ASIC3 + tristate "HTC ASIC3 SD/MMC support" + depends on MMC && HTC_ASIC3 + help + This provides support for the ASIC3 SD/MMC controller, used + in the iPAQ hx4700 and others. ++ + config MMC_SDHCI + tristate "Secure Digital Host Controller Interface support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL +Index: linux-2.6.24/drivers/input/keyboard/Makefile +=================================================================== +--- linux-2.6.24.orig/drivers/input/keyboard/Makefile 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/drivers/input/keyboard/Makefile 2008-03-10 16:10:28.000000000 +0000 +@@ -6,6 +6,7 @@ + + obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o + obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o ++obj-$(CONFIG_KEYBOARD_ASIC3) += asic3_keys.o + obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o + obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o + obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o diff --git a/packages/linux/linux-rp-2.6.24/sharpsl-rc-r1.patch b/packages/linux/linux-rp-2.6.24/sharpsl-rc-r1.patch index 453010a197..32a94c7cea 100644 --- a/packages/linux/linux-rp-2.6.24/sharpsl-rc-r1.patch +++ b/packages/linux/linux-rp-2.6.24/sharpsl-rc-r1.patch @@ -1,7 +1,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/spitz.c =================================================================== ---- linux-2.6.24.orig/arch/arm/mach-pxa/spitz.c 2008-01-27 02:10:17.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/spitz.c 2008-01-27 02:10:52.000000000 +0000 +--- linux-2.6.24.orig/arch/arm/mach-pxa/spitz.c 2008-03-10 17:05:37.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-pxa/spitz.c 2008-03-10 17:05:55.000000000 +0000 @@ -259,6 +259,13 @@ .id = -1, }; @@ -26,8 +26,8 @@ Index: linux-2.6.24/arch/arm/mach-pxa/spitz.c &spitzled_device, Index: linux-2.6.24/drivers/input/keyboard/Kconfig =================================================================== ---- linux-2.6.24.orig/drivers/input/keyboard/Kconfig 2008-01-27 02:10:20.000000000 +0000 -+++ linux-2.6.24/drivers/input/keyboard/Kconfig 2008-01-27 02:10:52.000000000 +0000 +--- linux-2.6.24.orig/drivers/input/keyboard/Kconfig 2008-03-10 17:05:40.000000000 +0000 ++++ linux-2.6.24/drivers/input/keyboard/Kconfig 2008-03-10 17:05:55.000000000 +0000 @@ -154,6 +154,17 @@ To compile this driver as a module, choose M here: the module will be called spitzkbd. @@ -48,20 +48,18 @@ Index: linux-2.6.24/drivers/input/keyboard/Kconfig depends on AMIGA Index: linux-2.6.24/drivers/input/keyboard/Makefile =================================================================== ---- linux-2.6.24.orig/drivers/input/keyboard/Makefile 2008-01-27 02:10:20.000000000 +0000 -+++ linux-2.6.24/drivers/input/keyboard/Makefile 2008-01-27 02:11:43.000000000 +0000 -@@ -15,6 +15,7 @@ - obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o - obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o - obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +--- linux-2.6.24.orig/drivers/input/keyboard/Makefile 2008-03-10 17:05:40.000000000 +0000 ++++ linux-2.6.24/drivers/input/keyboard/Makefile 2008-03-10 17:06:17.000000000 +0000 +@@ -26,3 +26,5 @@ + obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o + obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o + obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o +obj-$(CONFIG_SHARPSL_RC) += sharpsl_rc.o - obj-$(CONFIG_KEYBOARD_ASIC3) += asic3_keys.o - obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o - obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o ++ Index: linux-2.6.24/drivers/input/keyboard/sharpsl_rc.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24/drivers/input/keyboard/sharpsl_rc.c 2008-01-27 02:10:52.000000000 +0000 ++++ linux-2.6.24/drivers/input/keyboard/sharpsl_rc.c 2008-03-10 17:05:55.000000000 +0000 @@ -0,0 +1,291 @@ +/* + * Keyboard driver for Sharp Clamshell Models (SL-Cxx00) @@ -357,7 +355,7 @@ Index: linux-2.6.24/drivers/input/keyboard/sharpsl_rc.c Index: linux-2.6.24/drivers/input/keyboard/spitzkbd.c =================================================================== --- linux-2.6.24.orig/drivers/input/keyboard/spitzkbd.c 2008-01-24 22:58:37.000000000 +0000 -+++ linux-2.6.24/drivers/input/keyboard/spitzkbd.c 2008-01-27 02:10:52.000000000 +0000 ++++ linux-2.6.24/drivers/input/keyboard/spitzkbd.c 2008-03-10 17:05:55.000000000 +0000 @@ -19,6 +19,7 @@ #include <linux/jiffies.h> #include <linux/module.h> @@ -440,8 +438,8 @@ Index: linux-2.6.24/drivers/input/keyboard/spitzkbd.c del_timer_sync(&spitzkbd->htimer); Index: linux-2.6.24/arch/arm/mach-pxa/sharpsl.h =================================================================== ---- linux-2.6.24.orig/arch/arm/mach-pxa/sharpsl.h 2008-01-27 02:10:15.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/sharpsl.h 2008-01-27 02:10:52.000000000 +0000 +--- linux-2.6.24.orig/arch/arm/mach-pxa/sharpsl.h 2008-03-10 17:05:35.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-pxa/sharpsl.h 2008-03-10 17:05:55.000000000 +0000 @@ -37,15 +37,10 @@ */ #define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) @@ -462,7 +460,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/sharpsl.h Index: linux-2.6.24/arch/arm/mach-pxa/sharpsl_pm.c =================================================================== --- linux-2.6.24.orig/arch/arm/mach-pxa/sharpsl_pm.c 2008-01-24 22:58:37.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/sharpsl_pm.c 2008-01-27 02:10:52.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-pxa/sharpsl_pm.c 2008-03-10 17:05:55.000000000 +0000 @@ -135,6 +135,8 @@ | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); } @@ -475,7 +473,7 @@ Index: linux-2.6.24/arch/arm/mach-pxa/sharpsl_pm.c Index: linux-2.6.24/include/asm-arm/hardware/sharpsl_pm.h =================================================================== --- linux-2.6.24.orig/include/asm-arm/hardware/sharpsl_pm.h 2008-01-24 22:58:37.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/hardware/sharpsl_pm.h 2008-01-27 02:10:52.000000000 +0000 ++++ linux-2.6.24/include/asm-arm/hardware/sharpsl_pm.h 2008-03-10 17:05:55.000000000 +0000 @@ -104,3 +104,10 @@ irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id); irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id); @@ -490,7 +488,7 @@ Index: linux-2.6.24/include/asm-arm/hardware/sharpsl_pm.h Index: linux-2.6.24/include/linux/input.h =================================================================== --- linux-2.6.24.orig/include/linux/input.h 2008-01-24 22:58:37.000000000 +0000 -+++ linux-2.6.24/include/linux/input.h 2008-01-27 02:10:52.000000000 +0000 ++++ linux-2.6.24/include/linux/input.h 2008-03-10 17:05:55.000000000 +0000 @@ -636,6 +636,7 @@ #define SW_TABLET_MODE 0x01 /* set = tablet mode */ #define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ @@ -501,8 +499,8 @@ Index: linux-2.6.24/include/linux/input.h Index: linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c =================================================================== ---- linux-2.6.24.orig/arch/arm/mach-pxa/spitz_pm.c 2008-01-24 22:58:37.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c 2008-01-27 02:10:52.000000000 +0000 +--- linux-2.6.24.orig/arch/arm/mach-pxa/spitz_pm.c 2008-03-10 17:05:40.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c 2008-03-10 17:05:55.000000000 +0000 @@ -162,6 +162,13 @@ if (resume_on_alarm && (PEDR & PWER_RTC)) is_resume |= PWER_RTC; |