diff options
Diffstat (limited to 'packages/linux')
34 files changed, 4900 insertions, 15 deletions
diff --git a/packages/linux/nslu2-kernel.inc b/packages/linux/nslu2-kernel.inc index 33867b0e34..695268eb18 100644 --- a/packages/linux/nslu2-kernel.inc +++ b/packages/linux/nslu2-kernel.inc @@ -212,12 +212,13 @@ inherit kernel ARCH = "arm" KERNEL_IMAGETYPE = "zImage" # To specify the console set KERNEL_CONSOLE in the .bb file. -# CMDLINE_ROOT contains the boot options -CMDLINE_REBOOT ?= "reboot=s" +# CMDLINE_ROOT contains the boot options, CMDLINE_KERNEL_OPTIONS +# contains the things for a specific kernel. +CMDLINE_KERNEL_OPTIONS ?= "reboot=s" CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc" # Add distro specific debug (or non-debug) options to this CMDLINE_DEBUG ?= "" -CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_REBOOT} ${CMDLINE_DEBUG} ${CMDLINE_CONSOLE}" +CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_KERNEL_OPTIONS} ${CMDLINE_DEBUG} ${CMDLINE_CONSOLE}" # Add the architecture compiler flags to KERNEL_CC and KERNEL_LD as # required. Notice that this has to be done for each separately built diff --git a/packages/linux/nslu2-kernel/2.6/10-ixp4xx-copy-from.patch b/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-copy-from.patch index 03d94d282c..03d94d282c 100644 --- a/packages/linux/nslu2-kernel/2.6/10-ixp4xx-copy-from.patch +++ b/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-copy-from.patch diff --git a/packages/linux/nslu2-kernel/2.6/10-ixp4xx-regs.patch b/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-regs.patch index 32f7e3ccb8..32f7e3ccb8 100644 --- a/packages/linux/nslu2-kernel/2.6/10-ixp4xx-regs.patch +++ b/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-regs.patch diff --git a/packages/linux/nslu2-kernel/2.6/20-timer.patch b/packages/linux/nslu2-kernel/2.6.13/20-timer.patch index 356da6bb28..356da6bb28 100644 --- a/packages/linux/nslu2-kernel/2.6/20-timer.patch +++ b/packages/linux/nslu2-kernel/2.6.13/20-timer.patch diff --git a/packages/linux/nslu2-kernel/2.6/30-i2c-x1205.patch b/packages/linux/nslu2-kernel/2.6.13/30-i2c-x1205.patch index f05609f1e6..f05609f1e6 100644 --- a/packages/linux/nslu2-kernel/2.6/30-i2c-x1205.patch +++ b/packages/linux/nslu2-kernel/2.6.13/30-i2c-x1205.patch diff --git a/packages/linux/nslu2-kernel/2.6/40-mtd-shutdown.patch b/packages/linux/nslu2-kernel/2.6.13/40-mtd-shutdown.patch index e7cce4ebc0..e7cce4ebc0 100644 --- a/packages/linux/nslu2-kernel/2.6/40-mtd-shutdown.patch +++ b/packages/linux/nslu2-kernel/2.6.13/40-mtd-shutdown.patch diff --git a/packages/linux/nslu2-kernel/2.6/50-nslu2-arch.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-arch.patch index f49ea7f1c3..f49ea7f1c3 100644 --- a/packages/linux/nslu2-kernel/2.6/50-nslu2-arch.patch +++ b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-arch.patch diff --git a/packages/linux/nslu2-kernel/2.6/50-nslu2-include.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-include.patch index c69e69c53e..c69e69c53e 100644 --- a/packages/linux/nslu2-kernel/2.6/50-nslu2-include.patch +++ b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-include.patch diff --git a/packages/linux/nslu2-kernel/2.6/50-nslu2-setup.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-setup.patch index f38c0c8b3e..f38c0c8b3e 100644 --- a/packages/linux/nslu2-kernel/2.6/50-nslu2-setup.patch +++ b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-setup.patch diff --git a/packages/linux/nslu2-kernel/2.6/55-nslu2-rpbutton.patch b/packages/linux/nslu2-kernel/2.6.13/55-nslu2-rpbutton.patch index b5ce101d68..b5ce101d68 100644 --- a/packages/linux/nslu2-kernel/2.6/55-nslu2-rpbutton.patch +++ b/packages/linux/nslu2-kernel/2.6.13/55-nslu2-rpbutton.patch diff --git a/packages/linux/nslu2-kernel/2.6/70-xscale-reset.patch b/packages/linux/nslu2-kernel/2.6.13/70-xscale-reset.patch index 4e68456e20..4e68456e20 100644 --- a/packages/linux/nslu2-kernel/2.6/70-xscale-reset.patch +++ b/packages/linux/nslu2-kernel/2.6.13/70-xscale-reset.patch diff --git a/packages/linux/nslu2-kernel/2.6/90-little-endian.patch b/packages/linux/nslu2-kernel/2.6.13/90-little-endian.patch index 1fc432b5db..1fc432b5db 100644 --- a/packages/linux/nslu2-kernel/2.6/90-little-endian.patch +++ b/packages/linux/nslu2-kernel/2.6.13/90-little-endian.patch diff --git a/packages/linux/nslu2-kernel/2.6/95-nslu2-defconfig.patch b/packages/linux/nslu2-kernel/2.6.13/95-nslu2-defconfig.patch index f86830d82b..f86830d82b 100644 --- a/packages/linux/nslu2-kernel/2.6/95-nslu2-defconfig.patch +++ b/packages/linux/nslu2-kernel/2.6.13/95-nslu2-defconfig.patch diff --git a/packages/linux/nslu2-kernel/2.6/96-nslu2-le-defconfig.patch b/packages/linux/nslu2-kernel/2.6.13/96-nslu2-le-defconfig.patch index 4b6e28a878..4b6e28a878 100644 --- a/packages/linux/nslu2-kernel/2.6/96-nslu2-le-defconfig.patch +++ b/packages/linux/nslu2-kernel/2.6.13/96-nslu2-le-defconfig.patch diff --git a/packages/linux/nslu2-kernel/2.6.14/.mtn2git_empty b/packages/linux/nslu2-kernel/2.6.14/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/.mtn2git_empty diff --git a/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch b/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch new file mode 100644 index 0000000000..03d94d282c --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch @@ -0,0 +1,39 @@ +# This patch fixes ixp4xx_copy_from for cases where the 'from' +# pointer is odd - that would cause all the accesses to be +# misaligned in the old code. +--- linux-2.6.12.2/.pc/ixp4xx_copy_from.patch/drivers/mtd/maps/ixp4xx.c 2005-09-21 22:35:38.761014739 -0700 ++++ linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c 2005-09-23 01:27:54.696223365 -0700 +@@ -54,19 +54,23 @@ + static void ixp4xx_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) + { +- int i; +- u8 *dest = (u8 *) to; +- u16 *src = (u16 *) (map->map_priv_1 + from); +- u16 data; ++ if (len <= 0) ++ return; + +- for (i = 0; i < (len / 2); i++) { +- data = src[i]; +- dest[i * 2] = BYTE0(data); +- dest[i * 2 + 1] = BYTE1(data); ++ u8 *dest = (u8 *) to; ++ u8 *src = (u8 *) (map->map_priv_1 + from); ++ if (from & 1) ++ *dest++ = BYTE1(*(u16 *)(src-1)), ++src, --len; ++ ++ while (len >= 2) { ++ u16 data = *(u16 *)src; src += 2; ++ *dest++ = BYTE0(data); ++ *dest++ = BYTE1(data); ++ len -= 2; + } + +- if (len & 1) +- dest[len - 1] = BYTE0(src[i]); ++ if (len > 0) ++ *dest++ = BYTE0(*(u16 *)src); + } + + /* diff --git a/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-gpio.patch b/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-gpio.patch new file mode 100644 index 0000000000..f3f1bc3129 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-gpio.patch @@ -0,0 +1,11 @@ +--- linux-2.6.14-rc2/include/asm-arm/arch-ixp4xx/platform.h 2005-09-24 13:17:24.000000000 +0200 ++++ test3/include/asm-arm/arch-ixp4xx/platform.h 2005-09-24 16:41:17.000000000 +0200 +@@ -93,7 +93,7 @@ + + static inline void gpio_line_config(u8 line, u32 direction) + { +- if (direction == IXP4XX_GPIO_OUT) ++ if (direction == IXP4XX_GPIO_IN) + *IXP4XX_GPIO_GPOER |= (1 << line); + else + *IXP4XX_GPIO_GPOER &= ~(1 << line); diff --git a/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-ticks.patch b/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-ticks.patch new file mode 100644 index 0000000000..bd3271973b --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-ticks.patch @@ -0,0 +1,41 @@ +--- linux-2.6.14-rc2/include/asm-arm/arch-ixp4xx/timex.h 2005-09-17 12:42:45.000000000 +0200 ++++ test3/include/asm-arm/arch-ixp4xx/timex.h 2005-09-24 14:51:41.000000000 +0200 +@@ -12,4 +12,7 @@ + */ + #define FREQ 66666666 + #define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) ++#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) ++ ++extern u32 ixp4xx_ticks_per_usec; + +--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/common.c 2005-09-24 13:16:59.000000000 +0200 ++++ test3/arch/arm/mach-ixp4xx/common.c 2005-09-24 17:16:11.000000000 +0200 +@@ -239,7 +239,7 @@ + + static unsigned volatile last_jiffy_time; + +-#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) ++u32 ixp4xx_ticks_per_usec = CLOCK_TICKS_PER_USEC; + + /* IRQs are disabled before entering here from do_gettimeofday() */ + static unsigned long ixp4xx_gettimeoffset(void) +@@ -248,7 +248,7 @@ + + elapsed = *IXP4XX_OSTS - last_jiffy_time; + +- return elapsed / CLOCK_TICKS_PER_USEC; ++ return elapsed / ixp4xx_ticks_per_usec; + } + + static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +@@ -328,6 +328,10 @@ + + void __init ixp4xx_sys_init(void) + { ++ printk(KERN_INFO "%s: ticks_per_usec, std: %ld, this: %u\n", ++ __FUNCTION__, ++ CLOCK_TICKS_PER_USEC, ixp4xx_ticks_per_usec); ++ + if (cpu_is_ixp46x()) { + platform_add_devices(ixp46x_devices, + ARRAY_SIZE(ixp46x_devices)); diff --git a/packages/linux/nslu2-kernel/2.6.14/30-i2c-x1205.patch b/packages/linux/nslu2-kernel/2.6.14/30-i2c-x1205.patch new file mode 100644 index 0000000000..c212238941 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/30-i2c-x1205.patch @@ -0,0 +1,622 @@ +--- linux-2.6.14-rc2/drivers/i2c/chips/Kconfig 2005-09-24 13:17:13.000000000 +0200 ++++ test3/drivers/i2c/chips/Kconfig 2005-09-24 16:09:51.000000000 +0200 +@@ -126,4 +126,14 @@ + This driver can also be built as a module. If so, the module + will be called max6875. + ++config SENSORS_X1205 ++ tristate "Xicor X1205 RTC chip" ++ depends on I2C ++ select I2C_SENSOR ++ help ++ If you say yes here you get support for the Xicor X1205 RTC chip. ++ ++ This driver can also be built as a module. If so, the module ++ will be called x1205 ++ + endmenu +--- linux-2.6.14-rc2/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200 ++++ test3/drivers/i2c/chips/Makefile 2005-09-24 16:49:34.000000000 +0200 +@@ -13,6 +13,7 @@ + obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o + obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + obj-$(CONFIG_TPS65010) += tps65010.o ++obj-$(CONFIG_SENSORS_X1205) += x1205.o + + ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) + EXTRA_CFLAGS += -DDEBUG +diff -urN linux-2.6.14-rc2/drivers/i2c/chips/x1205.c test3/drivers/i2c/chips/x1205.c +--- linux-2.6.14-rc2/drivers/i2c/chips/x1205.c 1970-01-01 01:00:00.000000000 +0100 ++++ test3/drivers/i2c/chips/x1205.c 2005-09-24 16:11:16.000000000 +0200 +@@ -0,0 +1,522 @@ ++/* ++ * linux/drivers/i2c/chips/x1205.c ++ * ++ * x1205.c - An 12c driver for the Xicor X1205 RTC ++ * Copyright 2004 Karen Spearel ++ * Copyright 2005 Alessandro Zummo ++ * ++ * please send all reports to: ++ * kas11 at tampabay dot rr dot com ++ * a dot zummo at towertech dot it ++ * ++ * based on the other drivers in this same directory. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/i2c.h> ++#include <linux/string.h> ++#include <linux/bcd.h> ++#include <linux/rtc.h> ++#include <linux/list.h> ++ ++#include <linux/x1205.h> ++ ++#define EPOCH_1900 1900 ++#define EPOCH_1970 1970 ++ ++#define DRIVER_VERSION "0.9.5" ++#define DRIVER_NAME (x1205_driver.name) ++ ++ ++/* Addresses to scan */ ++static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END }; ++ ++/* Insmod parameters */ ++I2C_CLIENT_INSMOD; ++I2C_CLIENT_MODULE_PARM(hctosys, ++ "Set the system time from the hardware clock upon initialization"); ++ ++/* Prototypes */ ++ ++static int x1205_attach(struct i2c_adapter *adapter); ++static int x1205_detach(struct i2c_client *client); ++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); ++static int x1205_validate_client(struct i2c_client *client); ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ u8 reg_base); ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base); ++static int x1205_validate_tm(struct rtc_time *tm); ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); ++static int x1205_hctosys(struct i2c_client *client); ++ ++ ++static struct i2c_driver x1205_driver = { ++ .owner = THIS_MODULE, ++ .name = "x1205", ++ .flags = I2C_DF_NOTIFY, ++ .attach_adapter = &x1205_attach, ++ .detach_client = &x1205_detach, ++/* .command = &x1205_command,*/ ++}; ++ ++struct x1205_data { ++ struct i2c_client client; ++ struct list_head list; ++ unsigned int epoch; ++}; ++ ++ ++static const unsigned char days_in_mo[] = ++{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; ++ ++static LIST_HEAD(x1205_clients); ++ ++/* Workaround until the I2C subsytem will allow to send ++ * commands to a specific client. This function will send the command ++ * to the first client. ++ */ ++ ++int x1205_do_command(unsigned int cmd, void *arg) ++{ ++ struct list_head *walk; ++ struct list_head *tmp; ++ struct x1205_data *data; ++ ++ list_for_each_safe(walk, tmp, &x1205_clients) { ++ data = list_entry(walk, struct x1205_data, list); ++ return x1205_command(&data->client, cmd, arg); ++ } ++ ++ return -ENODEV; ++} ++ ++ ++/* ++ * in the routines that deal directly with the x1205 hardware, we use ++ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch ++ * Epoch is inited as 2000. Time is set to UT ++ */ ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ u8 reg_base) ++{ ++ static unsigned char addr[2] = { 0, }; ++ unsigned char buf[8]; ++ ++ struct i2c_msg msgs[2] = { ++ { client->addr, 0, 2, addr }, /* random read */ ++ { client->addr, I2C_M_RD, 8, buf }, ++ }; ++ ++ struct x1205_data *xdata = i2c_get_clientdata(client); ++ ++ addr[1] = reg_base; ++ ++ if ((i2c_transfer(client->adapter, msgs, 2)) == 2) { ++ /* did we read 2 messages? */ ++ ++ dev_dbg(&client->dev, ++ "%s: raw read data - sec-%02x min-%02x hr-%02x" ++ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", ++ __FUNCTION__, ++ buf[0], buf[1], buf[2], buf[3], ++ buf[4], buf[5], buf[6], buf[7]); ++ ++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); ++ tm->tm_min = BCD2BIN(buf[CCR_MIN]); ++ buf[CCR_HOUR] &= ~X1205_HR_MIL; ++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */ ++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); ++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); ++ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; ++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900; ++ tm->tm_wday = buf[CCR_WDAY]; ++ ++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ } else { ++ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++ ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base) ++{ ++ int i, err, xfer; ++ ++ static unsigned char wel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL }; ++ ++ ++ static unsigned char rwel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL | X1205_SR_RWEL }; ++ ++ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; ++ ++ static unsigned char data[3] = { 0, }; ++ static unsigned char buf[8]; ++ ++ struct x1205_data *xdata = i2c_get_clientdata(client); ++ ++ if ((err = x1205_validate_tm(tm)) < 0) ++ return err; ++ ++ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ ++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); ++ buf[CCR_MIN] = BIN2BCD(tm->tm_min); ++ ++ /* Set 24HR format */ ++ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; ++ ++ if (datetoo == X1205_DATETOO) { ++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); ++ ++ /* month, 0 - 11 */ ++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */ ++ ++ /* year, since 1900 */ ++ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch)); ++ buf[CCR_WDAY] = tm->tm_wday & 7; ++ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100); ++ } ++ ++ xfer = i2c_master_send(client, wel, 3); ++ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ xfer = i2c_master_send(client, rwel, 3); ++ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ for (i = 0; i < 8; i++) { ++ data[1] = i + reg_base; ++ data[2] = buf[i]; ++ xfer = i2c_master_send(client, data, 3); ++ ++ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n", ++ __FUNCTION__, ++ xfer, data[1], data[2]); ++ ++ if (xfer != 3) ++ return -EIO; ++ }; ++ ++ xfer = i2c_master_send(client, diswe, 3); ++ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ return 0; ++} ++ ++static int x1205_hctosys(struct i2c_client *client) ++{ ++ int err; ++ ++ struct rtc_time tm; ++ struct timespec tv; ++ ++ ++ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); ++ ++ if (err) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Unable to set the system clock\n", ++ DRIVER_NAME); ++ ++ return err; ++ ++ } ++ ++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether ++ * it stores the most close value or the value with partial seconds ++ * truncated, however it is important for x1205_sync_rtc that it be ++ * defined to store the truncated value. This is because otherwise it ++ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the ++ * sync function, and atomic reads of >32bits on ARM are not possible. ++ * So storing the most close value would slow down the sync API. So ++ * Here we have the truncated value and the best guess is to add 0.5s ++ */ ++ ++ tv.tv_nsec = NSEC_PER_SEC >> 1; ++ ++ /* WARNING: this is not the C library 'mktime' call, it is a built in ++ * inline function from include/linux/time.h. It expects (requires) ++ * the month to be in the range 1-12 ++ */ ++ ++ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1, ++ tm.tm_mday, tm.tm_hour, ++ tm.tm_min, tm.tm_sec); ++ ++ do_settimeofday(&tv); ++ ++ dev_info(&client->adapter->dev, ++ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n", ++ DRIVER_NAME, ++ tm.tm_year + EPOCH_1900, tm.tm_mon + 1, ++ tm.tm_mday, tm.tm_hour, tm.tm_min, ++ tm.tm_sec); ++ ++ return 0; ++} ++ ++static int x1205_validate_client(struct i2c_client *client) ++{ ++ int i, xfer; ++ ++ /* Probe array. We will read the register at the specified ++ * address and check if the given bits are zero. ++ */ ++ ++ const unsigned char probe_pattern[] = { ++ ++ X1205_REG_SR, 0x18, ++ X1205_REG_Y2K, 0xC6, ++ X1205_REG_DW, 0xF8, ++ X1205_REG_MO, 0xE0, ++ X1205_REG_DT, 0xC0, ++ X1205_REG_HR, 0x40, ++ X1205_REG_MN, 0x80, ++ X1205_REG_SC, 0x80, ++ X1205_REG_DTR, 0xF8, ++ X1205_REG_ATR, 0x18, ++ X1205_REG_INT, 0x18, ++ X1205_REG_0, 0xFF, ++ X1205_REG_Y2K1, 0xC6, ++ X1205_REG_DWA1, 0x78, ++ X1205_REG_MOA1, 0x60, ++ X1205_REG_DTA1, 0x40, ++ X1205_REG_HRA1, 0x40, ++ X1205_REG_Y2K0, 0xC6, ++ X1205_REG_DWA0, 0x78, ++ X1205_REG_MOA0, 0x60, ++ X1205_REG_DTA0, 0x40, ++ X1205_REG_HRA0, 0x40, ++ }; ++ ++ for (i = 0; i < sizeof(probe_pattern); i += 2) ++ { ++ unsigned char buf; ++ ++ static unsigned char addr[2]; ++ ++ struct i2c_msg msgs[2] = { ++ { client->addr, 0, 2, addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &buf }, ++ }; ++ ++ addr[0] = 0x00; ++ addr[1] = probe_pattern[i]; ++ ++ xfer = i2c_transfer(client->adapter, msgs, 2); ++ ++ if (xfer != 2) { ++ dev_dbg(&client->adapter->dev, ++ "%s: could not read register %x\n", ++ __FUNCTION__, addr[1]); ++ ++ return -EIO; ++ } ++ ++ if ((buf & probe_pattern[i+1]) != 0) { ++ dev_dbg(&client->adapter->dev, ++ "%s: register %x, pattern %d: %x\n", ++ __FUNCTION__, addr[1], i, buf); ++ ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static int x1205_attach(struct i2c_adapter *adapter) ++{ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ return i2c_probe(adapter, &addr_data, x1205_probe); ++} ++ ++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) ++{ ++ struct i2c_client *new_client; ++ struct x1205_data *xdata; ++ ++ int err = 0; ++ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) { ++ err = -ENOMEM; ++ goto exit; ++ } ++ ++ /* Fill our data structure */ ++ ++ memset(xdata, 0, sizeof(struct x1205_data)); ++ ++ xdata->epoch = 2000; ++ ++ ++ /* Prepare i2c_client structure */ ++ ++ new_client = &xdata->client; ++ i2c_set_clientdata(new_client, xdata); ++ new_client->addr = address; ++ new_client->adapter = adapter; ++ new_client->driver = &x1205_driver; ++ new_client->flags = 0; ++ ++ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE); ++ ++ ++ /* Verify the chip is really an X1205 */ ++ ++ if (kind < 0) ++ { ++ if (x1205_validate_client(new_client) < 0) { ++ err = -ENODEV; ++ goto exit_kfree; ++ } ++ } ++ ++ /* Inform the i2c layer */ ++ if ((err = i2c_attach_client(new_client))) ++ goto exit_kfree; ++ ++ list_add(&xdata->list, &x1205_clients); ++ ++ dev_info(&adapter->dev, "%s: chip found, driver " DRIVER_VERSION "\n", ++ DRIVER_NAME); ++ ++ /* If requested, se the system time */ ++ if (hctosys) ++ x1205_hctosys(new_client); ++ ++ return 0; ++ ++exit_kfree: ++ kfree(xdata); ++ ++exit: ++ return err; ++} ++ ++static int x1205_detach(struct i2c_client *client) ++{ ++ int err; ++ struct x1205_data *data = i2c_get_clientdata(client); ++ ++ dev_dbg(&client->dev, "%s\n", __FUNCTION__); ++ ++ if ((err = i2c_detach_client(client))) ++ return err; ++ ++ list_del(&data->list); ++ kfree(data); ++ return 0; ++} ++ ++/* make sure the rtc_time values are in bounds */ ++static int x1205_validate_tm(struct rtc_time *tm) ++{ ++ tm->tm_year += 1900; ++ ++ if (tm->tm_year < EPOCH_1970) ++ return -EINVAL; ++ ++ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) ++ return -EINVAL; ++ ++ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && ++ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) ++ return -EINVAL; ++ ++ if ((tm->tm_year -= EPOCH_1900) > 255) ++ return -EINVAL; ++ ++ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) ++{ ++ if (client == NULL || tm == NULL) ++ return -EINVAL; ++ ++ if (!capable(CAP_SYS_TIME)) ++ return -EACCES; ++ ++ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); ++ ++ switch (cmd) { ++ case X1205_CMD_GETDATETIME: ++ return x1205_get_datetime(client, tm, X1205_CCR_BASE); ++ ++ case X1205_CMD_SETTIME: ++ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE); ++ ++ case X1205_CMD_SETDATETIME: ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE); ++ ++ case X1205_CMD_GETALARM: ++ return x1205_get_datetime(client, tm, X1205_ALM0_BASE); ++ ++ case X1205_CMD_SETALARM: ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE); ++ ++ default: ++ return -EINVAL; ++ } ++} ++ ++ ++static int __init x1205_init(void) ++{ ++ return i2c_add_driver(&x1205_driver); ++} ++ ++static void __exit x1205_exit(void) ++{ ++ i2c_del_driver(&x1205_driver); ++} ++ ++MODULE_AUTHOR( ++ "Karen Spearel <kas11@tampabay.rr.com>, " ++ "Alessandro Zummo <a.zummo@towertech.it>"); ++MODULE_DESCRIPTION("Xicor X1205 RTC driver"); ++MODULE_LICENSE("GPL"); ++ ++EXPORT_SYMBOL_GPL(x1205_do_command); ++ ++module_init(x1205_init); ++module_exit(x1205_exit); +--- linux-2.6.14-rc2/include/linux/x1205.h 1970-01-01 01:00:00.000000000 +0100 ++++ test3/include/linux/x1205.h 2005-09-24 16:59:28.000000000 +0200 +@@ -0,0 +1,66 @@ ++ ++/* commands */ ++ ++#define X1205_CMD_GETDATETIME 0 ++#define X1205_CMD_SETTIME 1 ++#define X1205_CMD_SETDATETIME 2 ++#define X1205_CMD_GETALARM 3 ++#define X1205_CMD_SETALARM 4 ++ ++/* flags */ ++ ++#define X1205_NODATE 0 ++#define X1205_DATETOO 1 ++ ++/* offsets into read buf - add 2 for write buf */ ++ ++#define CCR_SEC 0 ++#define CCR_MIN 1 ++#define CCR_HOUR 2 ++#define CCR_MDAY 3 ++#define CCR_MONTH 4 ++#define CCR_YEAR 5 ++#define CCR_WDAY 6 ++#define CCR_Y2K 7 ++ ++#define X1205_REG_SR 0x3F /* status register */ ++#define X1205_REG_Y2K 0x37 ++#define X1205_REG_DW 0x36 ++#define X1205_REG_YR 0x35 ++#define X1205_REG_MO 0x34 ++#define X1205_REG_DT 0x33 ++#define X1205_REG_HR 0x32 ++#define X1205_REG_MN 0x31 ++#define X1205_REG_SC 0x30 ++#define X1205_REG_DTR 0x13 ++#define X1205_REG_ATR 0x12 ++#define X1205_REG_INT 0x11 ++#define X1205_REG_0 0x10 ++#define X1205_REG_Y2K1 0x0F ++#define X1205_REG_DWA1 0x0E ++#define X1205_REG_YRA1 0x0D ++#define X1205_REG_MOA1 0x0C ++#define X1205_REG_DTA1 0x0B ++#define X1205_REG_HRA1 0x0A ++#define X1205_REG_MNA1 0x09 ++#define X1205_REG_SCA1 0x08 ++#define X1205_REG_Y2K0 0x07 ++#define X1205_REG_DWA0 0x06 ++#define X1205_REG_YRA0 0x05 ++#define X1205_REG_MOA0 0x04 ++#define X1205_REG_DTA0 0x03 ++#define X1205_REG_HRA0 0x02 ++#define X1205_REG_MNA0 0x01 ++#define X1205_REG_SCA0 0x00 ++ ++#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */ ++#define X1205_CCR_BASE 0x30 /* Base address of CCR */ ++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ ++ ++#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */ ++#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */ ++ ++#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */ ++ ++extern int x1205_do_command(unsigned int cmd, void *arg); ++ diff --git a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-arch.patch b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-arch.patch new file mode 100644 index 0000000000..14c40ca955 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-arch.patch @@ -0,0 +1,73 @@ +--- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700 ++++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700 +@@ -37,6 +37,7 @@ + defined(CONFIG_ARCH_INTEGRATOR) || \ + defined(CONFIG_ARCH_PXA) || \ + defined(CONFIG_ARCH_IXP4XX) || \ ++ defined(CONFIG_MACH_NSLU2) || \ + defined(CONFIG_ARCH_IXP2000) || \ + defined(CONFIG_ARCH_LH7A40X) || \ + defined(CONFIG_ARCH_OMAP) +--- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S 2005-03-01 23:37:52.000000000 -0800 ++++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-06-17 17:51:32.546985425 -0700 +@@ -47,3 +47,8 @@ + orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) + #endif + ++#ifdef CONFIG_MACH_NSLU2 ++ mov r7, #(MACH_TYPE_NSLU2 & 0xff) ++ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00) ++#endif ++ +--- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700 ++++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700 +@@ -43,6 +43,12 @@ + IXDP465 Development Platform (Also known as BMP). + For more information on this platform, see <file:Documentation/arm/IXP4xx>. + ++config MACH_NSLU2 ++ bool "NSLU2" ++ help ++ Say 'Y' here if you want your kernel to support Linksys's ++ NSLU2 NAS device. For more information on this platform, ++ see http://www.nslu2-linux.org + + # + # IXCDP1100 is the exact same HW as IXDP425, but with a different machine +--- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c 2005-03-01 23:37:30.000000000 -0800 ++++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-06-17 17:51:32.566982394 -0700 +@@ -94,7 +94,11 @@ + struct resource *res; + }; + ++#ifdef CONFIG_MACH_NSLU2 ++static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL }; ++#else + static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; ++#endif + + static int ixp4xx_flash_remove(struct device *_dev) + { +--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800 ++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700 +@@ -44,5 +44,6 @@ + #include "ixdp425.h" + #include "coyote.h" + #include "prpmc1100.h" ++#include "nslu2.h" + + #endif /* _ASM_ARCH_HARDWARE_H */ +--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800 ++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700 +@@ -93,4 +93,11 @@ + #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 + #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 + ++/* ++ * NSLU2 board IRQs ++ */ ++#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 ++#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 ++#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 ++ + #endif diff --git a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-general.patch b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-general.patch new file mode 100644 index 0000000000..b97341428b --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-general.patch @@ -0,0 +1,1181 @@ +diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/Makefile test3/arch/arm/mach-ixp4xx/Makefile +--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/Makefile 2005-09-17 12:42:02.000000000 +0200 ++++ test3/arch/arm/mach-ixp4xx/Makefile 2005-09-24 13:21:35.000000000 +0200 +@@ -8,4 +8,5 @@ + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o nslu2-rtc.o + +diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-io.c test3/arch/arm/mach-ixp4xx/nslu2-io.c +--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 01:00:00.000000000 +0100 ++++ test3/arch/arm/mach-ixp4xx/nslu2-io.c 2005-09-24 15:44:08.000000000 +0200 +@@ -0,0 +1,696 @@ ++//============================================================================= ++// ++// n2-io.c version 0.1.7 ++// Author: Karen Spearel <kas11 at tampabay.rr.com> ++// please report problems/bugs directly to the address above ++// ++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per ++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk ++// ++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, ++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT ++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER ++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. ++// ++//============================================================================= ++// GPIO Function State ++// 0 Red LED Status ++// 1 Green LED Ready = 1 ++// 2 Disk 2 LED On = 0 ++// 3 Disk 1 LED On = 0 ++// 4 Buzzer ++// 5 Power Button Pressed = 1 ++// 8 Power Down Output = 1 powers down NSLU2 ++// 12 Reset Pressed = 0 ++ ++#include <linux/config.h> ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/utsname.h> ++#include <linux/kernel.h> ++#include <linux/major.h> ++#include <linux/string.h> ++#include <linux/proc_fs.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/errno.h> ++#include <linux/fs.h> ++#include <linux/miscdevice.h> ++#include <linux/device.h> ++#include <linux/interrupt.h> ++#include <linux/moduleparam.h> ++#include <linux/timer.h> ++#include <linux/reboot.h> ++ ++#include <asm/system.h> ++#include <asm/uaccess.h> ++#include <asm/hardware.h> ++#include <asm-arm/irq.h> ++#include <asm-arm/delay.h> ++#include <asm-arm/signal.h> ++ ++/* Set this to 1 to output lots of debug messages. */ ++#define NSLU2_IO_DEBUG 0 ++ ++#if NSLU2_IO_DEBUG ++#define nslu2_io_debug(args) printk args ++#else ++#define nslu2_io_debug(args) ((void)0) ++#endif ++ ++#define VERSION "0.1.7" ++ ++#define NSLU2RB_MAJOR 60 //rbuttons ++#define NSLU2PB_MAJOR 61 //pbuttons ++#define NSLU2BZ_MAJOR 62 //buzzer ++#define NSLU2LM_MAJOR 126 ++ ++#define NSLU2_BEEP_DUR_LONG 2000 ++#define NSLU2_BEEP_DUR_MED 400 ++#define NSLU2_BEEP_DUR_SHORT 100 ++#define NSLU2_BEEP_PITCH_HIGH 250 ++#define NSLU2_BEEP_PITCH_MED 500 ++#define NSLU2_BEEP_PITCH_LOW 1000 ++#define NSLU2_LONG_DELAY 30000 ++ ++#define NSLU2_BZ_GPIO 4 ++#define NSLU2_PB_GPIO 5 ++#define NSLU2_PO_GPIO 8 //power off ++#define NSLU2_RB_GPIO 12 ++ ++#define NSLU2_PB_IRQ 22 //gpio5 ++#define NSLU2_RB_IRQ 29 //gpio12 ++ ++#define GPIO_BZ_BM 0x0010 //b0000 0000 0001 0000 ++#define GPIO_PB_BM 0x0020 //b0000 0000 0010 0000 ++#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 ++#define GPIO_RB_BM 0x1000 //b0001 0000 0000 0000 ++ ++#define RB_DELAY 50 ++#define PB_DELAY 20 ++ ++#define PWR_OFF_STR "poweroff" ++ ++ ++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe ++ ++#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible ++#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults ++#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults ++#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 ++#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies ++#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies ++#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever ++#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long ++ ++#define NSLU2LM_OFF _IOW('M',32,long) ++#define NSLU2LM_ON _IOW('M',33,long) ++#define NSLU2LM_BLINK _IOW('M',34,long) ++#define NSLU2LM_ALT _IOW('M',35,long) ++#define NSLU2LM_ALL_ON _IO('M',36) ++#define NSLU2LM_ALL_OFF _IO('M',37) ++ ++#define PHYS_LEDS 4 ++#define BLINK_DELAY 25 ++ ++// OR Masks to turn these LEDs ON ++ ++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 ++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 ++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 ++ ++// AND Masks to turn these LEDs OFF ++ ++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 ++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 ++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 ++ ++// AND Masks to turn these LEDs ON ++ ++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 ++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 ++ ++// Or Masks to turn these LEDs OFF ++ ++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 ++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 ++ ++// EOR masks for toggling LEDs on/off ++ ++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits ++#define RS_GRN_TGL 0x00000002 ++#define RS_RED_TGL 0x00000001 ++#define DISK1_TGL 0x00000008 ++#define DISK2_TGL 0x00000004 ++ ++// The LED names for switches ++ ++#define LED_RS_RED 0 ++#define LED_RS_GRN 1 ++#define LED_DISK1 2 ++#define LED_DISK2 3 ++#define LED_ALL 4 ++ ++static int nslu2_shutdown_in_progress = 0; ++ ++static unsigned long init_jiffy = 0; /* jiffies at init time */ ++static unsigned long ontime = 50; ++static unsigned long offtime = 450; ++static unsigned long bz_repeatcnt = 10; ++static unsigned long tone = 1000; ++ ++DECLARE_WAIT_QUEUE_HEAD(n2rb_waitq); ++DECLARE_WAIT_QUEUE_HEAD(n2pb_waitq); ++ ++static struct timer_list n2lm_rsg_timer; //rs green ++static struct timer_list n2lm_rsr_timer; //rs red ++static struct timer_list n2lm_d1_timer; //drive 1 ++static struct timer_list n2lm_d2_timer; //drive 2 ++static struct timer_list n2rb_timer; ++static struct timer_list n2pb_timer; ++static struct timer_list n2bz_timer; //beeper ++ ++// sysfs class ++static struct class *n2lm_class; ++ ++//================================================================================================== ++// ++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the ++// GPIO output register is xor'd with a mask corresponding to the selected led which simply ++// flips that bit. No record of what any of the other leds is doing is needed. ++// ++//================================================================================================== ++// this blinks rs green or green/yellow if rs red is on ++static void n2lm_rsg_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout ++ add_timer(&n2lm_rsg_timer); //reinit timer ++ return; ++} ++ ++// this blinks or alternates rs red green... inited wit green on/red off ++static void n2lm_rsr_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ return; ++} ++// blinks disk 1 ++static void n2lm_d1_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ return; ++} ++// blinks disk 2 ++static void n2lm_d2_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_start(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); ++ ++ switch(led) { ++ case LED_RS_RED: ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ break; ++ ++ case LED_RS_GRN: ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsg_timer); ++ break; ++ ++ case LED_DISK1: ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ break; ++ ++ case LED_DISK2: ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ break; ++ ++ default: ++ break; ++ } ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_stop(unsigned long led) ++{ ++ switch (led) { ++ case LED_RS_RED: ++ del_timer(&n2lm_rsr_timer); ++ break; ++ case LED_RS_GRN: ++ del_timer(&n2lm_rsg_timer); ++ break; ++ case LED_DISK1: ++ del_timer(&n2lm_d1_timer); ++ break; ++ case LED_DISK2: ++ del_timer(&n2lm_d2_timer); ++ break; ++ default: ++ break; ++ } ++ return; ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_timer_stop_all(void) ++{ ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ return; ++} ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledon(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb ++ return; ++ case LED_ALL: //all green ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; ++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); ++ return; ++ } ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledoff(unsigned long led) ++{ ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 ++ return; ++ case LED_ALL: ++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); ++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); ++ } ++} ++ ++//================================================================================================== ++ ++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); ++ ++ if (led < 0 || led >= PHYS_LEDS) ++ return -EINVAL; ++ ++ switch (cmd ) { ++ case NSLU2LM_ON: ++ n2lm_timer_stop(led); ++ n2lm_ledon(led); ++ break; ++ ++ case NSLU2LM_OFF: ++ n2lm_timer_stop(led); ++ n2lm_ledoff(led); ++ break; ++ ++ case NSLU2LM_BLINK: ++ n2lm_ledon(led); ++ if (led == LED_RS_RED) ++ n2lm_rsr_timer.data = RS_RED_TGL; ++ n2lm_timer_start(led); ++ break; ++ ++ case NSLU2LM_ALT: ++ if (led == LED_RS_RED) ++ { ++ n2lm_ledon(LED_RS_GRN); ++ n2lm_ledoff(LED_RS_RED); ++ n2lm_rsr_timer.data = RS_RG_ALT; ++ n2lm_timer_start(LED_RS_RED); ++ break; ++ } else ++ return -EINVAL; ++ ++ case NSLU2LM_ALL_ON: ++ n2lm_timer_stop_all(); ++ n2lm_ledon(LED_ALL); ++ break; ++ ++ case NSLU2LM_ALL_OFF: ++ n2lm_timer_stop_all(); ++ n2lm_ledoff(LED_ALL); ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static struct file_operations n2lm_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2lm_ioctl, ++}; ++//================================================================================================== ++// We can't do anything fancy here since the system tick rate is far below that required to ++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until ++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing ++// important should be haprepening. ++//================================================================================================== ++ ++static void n2_buzz(int tone_delay, int duration) ++{ ++ int i; ++ ++ *IXP4XX_GPIO_GPOER &= ~GPIO_BZ_BM; ++ ++ for (i = 1; i < duration; i++) { ++ *IXP4XX_GPIO_GPOUTR &= ~GPIO_BZ_BM; ++ udelay(tone_delay); ++ *IXP4XX_GPIO_GPOUTR |= GPIO_BZ_BM; ++ udelay(tone_delay); ++ } ++ *IXP4XX_GPIO_GPOER |= GPIO_BZ_BM; ++ ++ return; ++} ++//================================================================================================= ++ ++// this handles the buzzer duty cycle ++static void n2bz_handler(unsigned long data) ++{ ++ if (--bz_repeatcnt > 0) { //if just one beep left to do ++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout ++ add_timer(&n2bz_timer); //reinit timer ++ } ++ n2_buzz(tone/2, ontime); ++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); ++ return; ++} ++ ++//================================================================================================== ++ ++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) ++{ ++ switch (cmd) { ++ case NSLU2BZ_BEEP: ++ n2_buzz(tone/2, ontime); ++ break; ++ ++ case NSLU2BZ_BEEP_STOP: ++ del_timer(&n2bz_timer); ++ break; ++ ++ case NSLU2BZ_BEEPS: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ n2bz_handler(0); ++ break; ++ ++ case NSLU2BZ_TONESET: ++ if (param >= 250 && param <= 2000) ++ tone = param; ++ break; ++ ++ case NSLU2BZ_ONTIME: ++ if (param > 4 && param < 201) ++ ontime = param; ++ break; ++ ++ case NSLU2BZ_SILENTTIME: ++ if (param > ontime) //enforce a reasonable duty cycle ++ offtime = param; ++ else ++ offtime = ontime; ++ break; ++ ++ case NSLU2BZ_REPEATCNT: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ break; ++ ++ case NSLU2BZ_COMBINED: ++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 ++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies ++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies ++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 ++ break; ++ ++ default: ++ break; ++ } ++ return 0; ++} ++ ++static struct file_operations n2bz_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2bz_ioctl, ++}; ++ ++//================================================================================================== ++ ++static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) ++{ ++ void *ret; ++ if (!nslu2_shutdown_in_progress++) { ++ wake_up(&n2pb_waitq); ++ remove_proc_entry(PWR_OFF_STR, NULL); //no parent ++ n2_buzz(NSLU2_BEEP_PITCH_HIGH, NSLU2_BEEP_DUR_SHORT); // Short, high-pitched "OK" ++ ret = create_proc_entry(PWR_OFF_STR, 0, NULL); ++ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret)); ++ kill_proc(1,SIGINT,1); // Signal init to shut down ++ } else { ++ n2_buzz(NSLU2_BEEP_PITCH_LOW, NSLU2_BEEP_DUR_MED); // Make a scary noise! ++ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine! ++ } ++ return IRQ_HANDLED; ++} ++ ++struct testr { ++ int ctl; ++ long param; ++}; ++ ++static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) ++{ ++// This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable ++ ++ wake_up(&n2rb_waitq); ++ machine_power_off(); ++ return IRQ_HANDLED; // So we don't get a nobody cared error :-P ++} ++ ++//================================================================================================== ++// What to do here is majorly undetermined... ++ ++static int n2rb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) ++{ ++ printk(KERN_DEBUG "Reset Button Wait\n"); ++ interruptible_sleep_on(&n2rb_waitq); ++ return copy_to_user(buffer, "reset", 5) ? -EFAULT : 5; ++ ++} ++ ++//================================================================================================== ++// What to do here is majorly undetermined... ++ ++static int n2pb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) ++{ ++ printk(KERN_DEBUG "Power Button Wait\n"); ++ interruptible_sleep_on(&n2pb_waitq); ++ return copy_to_user(buffer, "poweroff", 8) ? -EFAULT : 8; ++ ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static struct file_operations n2rb_fops = { ++ .owner = THIS_MODULE, ++ .read = n2rb_read, ++}; ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static struct file_operations n2pb_fops = { ++ .owner = THIS_MODULE, ++ .read = n2pb_read, ++}; ++ ++//================================================================================================== ++ ++static void n2iom_initarch(void) ++{ ++ printk(KERN_DEBUG "setup_interrupts - jiffies=%ld init_jiffy=%ld\n", jiffies, init_jiffy); ++ ++ *IXP4XX_GPIO_GPISR = 0x20400000; // read the 2 irqs to clr ++ set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); ++ set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); ++ ++ gpio_line_isr_clear(NSLU2_RB_GPIO); ++ gpio_line_isr_clear(NSLU2_PB_GPIO); ++ ++ ++ init_timer(&n2lm_rsg_timer); ++ init_timer(&n2lm_rsr_timer); ++ init_timer(&n2lm_d1_timer); ++ init_timer(&n2lm_d2_timer); ++// init_timer(&n2rb_timer); ++// init_timer(&n2pb_timer); ++ init_timer(&n2bz_timer); ++ ++ n2lm_rsr_timer.function = n2lm_rsr_handler; ++ n2lm_rsg_timer.function = n2lm_rsg_handler; ++ n2lm_d2_timer.function = n2lm_d2_handler; ++ n2lm_d1_timer.function = n2lm_d1_handler; ++ n2bz_timer.function = n2bz_handler; ++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; ++ ++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 ++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds ++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; ++ n2lm_ledon(LED_ALL); ++ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT); ++ n2lm_ledoff(LED_ALL); ++// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit ++ n2lm_ledon(LED_RS_RED); ++ ++ return; ++} ++ ++//================================================================================================== ++ ++static int __init n2iom_init(void) ++{ ++ printk(KERN_INFO "NSLU2 I/O driver %s\n", VERSION); ++ ++ init_jiffy = jiffies; ++ printk(KERN_DEBUG "init_jiffy=%ld\n",init_jiffy); ++ n2iom_initarch(); ++ ++ n2lm_class = class_create(THIS_MODULE, "nslu2"); ++ ++ if (register_chrdev(NSLU2RB_MAJOR, "n2_rbm", &n2pb_fops) < 0) { ++ printk(KERN_DEBUG "Reset Button Major %d not available\n", NSLU2RB_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2RB_MAJOR, 0), NULL, "rbuttons"); ++ } ++ if (register_chrdev(NSLU2PB_MAJOR, "n2_pbm", &n2rb_fops) < 0) { ++ printk(KERN_DEBUG "Power Button Major %d not available\n", NSLU2PB_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2PB_MAJOR, 0), NULL, "pbuttons"); ++ } ++ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) { ++ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); ++ } ++ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) { ++ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); ++ } ++ ++ if (request_irq(NSLU2_RB_IRQ, &n2rb_handler, ++ SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) { ++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", NSLU2_RB_IRQ); ++ return -EIO; ++ } ++ if (request_irq(NSLU2_PB_IRQ, &n2pb_handler, ++ SA_INTERRUPT, "NSLU2 power button", NULL) < 0) { ++ printk(KERN_DEBUG "Power Button IRQ %d not available\n", NSLU2_PB_IRQ); ++ return -EIO; ++ } ++ ++ enable_irq(NSLU2_PB_IRQ); ++ enable_irq(NSLU2_RB_IRQ); ++ ++ return 0; ++} ++ ++//================================================================================================== ++ ++static void __exit n2iom_exit(void) ++{ ++ remove_proc_entry(PWR_OFF_STR, NULL); ++ del_timer(&n2rb_timer); ++ free_irq(NSLU2_RB_IRQ,NULL); ++ unregister_chrdev(NSLU2PB_MAJOR, "n2pb"); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2PB_MAJOR, 0)); ++ del_timer(&n2pb_timer); ++ free_irq(NSLU2_PB_IRQ, NULL); ++ unregister_chrdev(NSLU2RB_MAJOR, "n2rb" ); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2RB_MAJOR, 0)); ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" ); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0)); ++ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz"); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0)); ++ class_destroy(n2lm_class); ++} ++ ++module_init (n2iom_init); ++module_exit (n2iom_exit); ++ ++MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); ++MODULE_DESCRIPTION("NSLU2 I/O driver"); ++MODULE_LICENSE("GPL"); ++static int debug = 7; ++module_param(debug, int, 0644); ++MODULE_PARM_DESC(debug, "Debugging enabled = 8"); ++ +diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-part.c test3/arch/arm/mach-ixp4xx/nslu2-part.c +--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-part.c 1970-01-01 01:00:00.000000000 +0100 ++++ test3/arch/arm/mach-ixp4xx/nslu2-part.c 2005-09-24 13:21:22.000000000 +0200 +@@ -0,0 +1,120 @@ ++/* ++ * nslu2-part.c ++ * ++ * Maintainers: http://www.nslu2-linux.org/ ++ * Initial port: Mark Rakes <mrakes AT mac.com> ++ * ++ * "Parse" the fixed partition table of the Linksys NSLU2 and ++ * produce a Linux partition array to match. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/vmalloc.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++ ++/* info we know about the NSLU2's flash setup: ++ * ++ * Num Partition offset size ++ * --- --------- ---------- ----------- ++ * 0 RedBoot 0x00000000 0x00040000 ++ * 1 System Configuration 0x00040000 0x00020000 ++ * 2 Kernel 0x00060000 0x00100000 ++ * 3 Ramdisk 0x00160000 0x006a0000 ++ */ ++ #define NSLU2_NUM_FLASH_PARTITIONS 4 ++ #define NSLU2_FLASH_PART0_NAME "RedBoot" ++ #define NSLU2_FLASH_PART0_OFFSET 0x00000000 ++ #define NSLU2_FLASH_PART0_SIZE 0x00040000 ++ #define NSLU2_FLASH_PART1_NAME "System Configuration" ++ #define NSLU2_FLASH_PART1_OFFSET (NSLU2_FLASH_PART0_OFFSET + NSLU2_FLASH_PART0_SIZE) ++ #define NSLU2_FLASH_PART1_SIZE 0x00020000 ++ #define NSLU2_FLASH_PART2_NAME "Kernel" ++ #define NSLU2_FLASH_PART2_OFFSET (NSLU2_FLASH_PART1_OFFSET + NSLU2_FLASH_PART1_SIZE) ++ #define NSLU2_FLASH_PART2_SIZE 0x00100000 ++ #define NSLU2_FLASH_PART3_NAME "Ramdisk" ++ #define NSLU2_FLASH_PART3_OFFSET (NSLU2_FLASH_PART2_OFFSET + NSLU2_FLASH_PART2_SIZE) ++ #define NSLU2_FLASH_PART3_SIZE 0x006a0000 ++ ++static int parse_nslu2_partitions(struct mtd_info *master, ++ struct mtd_partition **pparts, ++ unsigned long flash_start) ++{ ++ struct mtd_partition *parts; ++ int ret = 0, namelen = 0; ++ char *names; ++ ++ namelen = strlen(NSLU2_FLASH_PART0_NAME) + ++ strlen(NSLU2_FLASH_PART1_NAME) + ++ strlen(NSLU2_FLASH_PART2_NAME) + ++ strlen(NSLU2_FLASH_PART3_NAME) + ++ NSLU2_NUM_FLASH_PARTITIONS; /*4 strings + each terminator */ ++ ++ parts = kmalloc(sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen, GFP_KERNEL); ++ if (!parts) { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ memset(parts, 0, sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen); ++ names = (char *)&parts[NSLU2_NUM_FLASH_PARTITIONS]; ++ ++ /* RedBoot partition */ ++ parts[0].size = NSLU2_FLASH_PART0_SIZE; ++ parts[0].offset = NSLU2_FLASH_PART0_OFFSET; ++ parts[0].name = NSLU2_FLASH_PART0_NAME; ++ parts[0].mask_flags = MTD_WRITEABLE; /* readonly */ ++ strcpy(names, NSLU2_FLASH_PART0_NAME); ++ names += strlen(names)+1; ++ /* System Configuration */ ++ parts[1].size = NSLU2_FLASH_PART1_SIZE; ++ parts[1].offset = NSLU2_FLASH_PART1_OFFSET; ++ parts[1].name = NSLU2_FLASH_PART1_NAME; ++ parts[1].mask_flags = MTD_WRITEABLE; /* readonly */ ++ strcpy(names, NSLU2_FLASH_PART1_NAME); ++ names += strlen(names)+1; ++ /* Kernel */ ++ parts[2].size = NSLU2_FLASH_PART2_SIZE; ++ parts[2].offset = NSLU2_FLASH_PART2_OFFSET; ++ parts[2].name = NSLU2_FLASH_PART2_NAME; ++ parts[2].mask_flags = MTD_WRITEABLE; /* readonly */ ++ strcpy(names, NSLU2_FLASH_PART2_NAME); ++ names += strlen(names)+1; ++ /* Ramdisk */ ++ parts[3].size = NSLU2_FLASH_PART3_SIZE; ++ parts[3].offset = NSLU2_FLASH_PART3_OFFSET; ++ parts[3].name = NSLU2_FLASH_PART3_NAME; ++ parts[3].mask_flags = MTD_WRITEABLE; /* readonly */ ++ strcpy(names, NSLU2_FLASH_PART3_NAME); ++ names += strlen(names)+1; ++ ++ ret = NSLU2_NUM_FLASH_PARTITIONS; ++ *pparts = parts; ++ out: ++ return ret; ++} ++ ++static struct mtd_part_parser nslu2_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_nslu2_partitions, ++ .name = "NSLU2", ++}; ++ ++static int __init nslu2_parser_init(void) ++{ ++ return register_mtd_parser(&nslu2_parser); ++} ++ ++static void __exit nslu2_parser_exit(void) ++{ ++ deregister_mtd_parser(&nslu2_parser); ++} ++ ++module_init(nslu2_parser_init); ++module_exit(nslu2_parser_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mark Rakes"); ++MODULE_DESCRIPTION("Parsing code for NSLU2 flash tables"); +diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-pci.c test3/arch/arm/mach-ixp4xx/nslu2-pci.c +--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ test3/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-09-24 15:19:54.000000000 +0200 +@@ -0,0 +1,83 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-pci.c ++ * ++ * NSLU2 board-level PCI initialization ++ * ++ * based on ixdp425-pci.c: ++ * Copyright (C) 2002 Intel Corporation. ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Maintainer: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++// GPIO 8 is used as the power input so is not free for use as a PCI IRQ ++// However, all the common PCI setup code presumes the standard 4 PCI ++// interrupts are available. So we compromise...we don't enable the ++// IRQ on Pin 8 but we let ++ ++#include <linux/config.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++ ++#include <asm/mach/pci.h> ++#include <asm/irq.h> ++#include <asm/hardware.h> ++#include <asm/mach-types.h> ++ ++void __init nslu2_pci_preinit(void) ++{ ++ set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); ++ set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); ++ set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); ++ ++ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); ++ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); ++ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); ++ ++ /* INTD is not configured. Unused? */ ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { ++ IRQ_NSLU2_PCI_INTA, ++ IRQ_NSLU2_PCI_INTB, ++ IRQ_NSLU2_PCI_INTC, ++ }; ++ ++ int irq = -1; ++ ++ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && ++ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { ++ irq = pci_irq_table[ ++ (slot + pin - 2) % 3]; ++ } ++ ++ return irq; ++} ++ ++struct hw_pci __initdata nslu2_pci = { ++ .nr_controllers = 1, ++ .preinit = nslu2_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = nslu2_map_irq, ++}; ++ ++int __init nslu2_pci_init(void) /* monkey see, monkey do */ ++{ ++ if (machine_is_nslu2()) ++ pci_common_init(&nslu2_pci); ++ ++ return 0; ++} ++ ++subsys_initcall(nslu2_pci_init); +diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-rtc.c test3/arch/arm/mach-ixp4xx/nslu2-rtc.c +--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-rtc.c 1970-01-01 01:00:00.000000000 +0100 ++++ test3/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-09-24 17:35:55.000000000 +0200 +@@ -0,0 +1,108 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-rtc.c ++ * ++ * NSL2 RTC driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on x1205-rtc.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/time.h> ++#include <linux/rtc.h> ++#include <linux/init.h> ++ ++#include <linux/x1205.h> ++ ++#include <asm/rtc.h> ++ ++ ++extern int (*set_rtc)(void); ++ ++static int nslu2_set_rtc(void) ++{ ++ struct rtc_time new_tm, old_tm; ++ unsigned long cur_secs = xtime.tv_sec; ++ ++ if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm)) ++ return 0; ++ ++ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */ ++ new_tm.tm_sec = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_min = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_hour = cur_secs % 24; ++ ++ /* ++ * avoid writing when we're going to change the day ++ * of the month. We will retry in the next minute. ++ * This basically means that if the RTC must not drift ++ * by more than 1 minute in 11 minutes. ++ */ ++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || ++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) ++ return 1; ++ ++ return x1205_do_command(X1205_CMD_SETTIME, &new_tm); ++} ++ ++static int rtc_read_alarm(struct rtc_wkalrm *alrm) ++{ ++ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time); ++} ++ ++static inline int rtc_set_alarm(struct rtc_wkalrm *alrm) ++{ ++ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time); ++} ++ ++static int rtc_read_time(struct rtc_time *tm) ++{ ++ return x1205_do_command(X1205_CMD_GETDATETIME, tm); ++} ++ ++static int rtc_set_time(struct rtc_time *tm) ++{ ++ return x1205_do_command(X1205_CMD_SETDATETIME, tm); ++} ++ ++static struct rtc_ops rtc_ops = { ++ .owner = THIS_MODULE, ++ .read_time = rtc_read_time, ++ .set_time = rtc_set_time, ++ .read_alarm = rtc_read_alarm, ++ .set_alarm = rtc_set_alarm, ++}; ++ ++static int __init nslu2_rtc_init(void) ++{ ++ int ret = register_rtc(&rtc_ops); ++ ++ if (ret) ++ return ret; ++ ++ set_rtc = nslu2_set_rtc; ++ ++ return 0; ++} ++ ++static void __exit nslu2_rtc_exit(void) ++{ ++ set_rtc = NULL; ++ ++ unregister_rtc(&rtc_ops); ++} ++ ++module_init(nslu2_rtc_init); ++module_exit(nslu2_rtc_exit); +diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-setup.c test3/arch/arm/mach-ixp4xx/nslu2-setup.c +--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ test3/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-09-24 17:27:31.000000000 +0200 +@@ -0,0 +1,145 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-setup.c ++ * ++ * NSLU2 board-setup ++ * ++ * based ixdp425-setup.c: ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Author: Mark Rakes <mrakes at mac.com> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * Fixed missing init_time in MACHINE_START kas11 10/22/04 ++ * Changed to conform to new style __init ixdp425 kas11 10/22/04 ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/serial.h> ++#include <linux/tty.h> ++#include <linux/serial_8250.h> ++ ++#include <asm/types.h> ++#include <asm/setup.h> ++#include <asm/memory.h> ++#include <asm/hardware.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data nslu2_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource nslu2_flash_resource = { ++ .start = NSLU2_FLASH_BASE, ++ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device nslu2_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &nslu2_flash_data, ++ }, ++ .num_resources = 1, ++ .resource = &nslu2_flash_resource, ++}; ++ ++static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { ++ .sda_pin = NSLU2_SDA_PIN, ++ .scl_pin = NSLU2_SCL_PIN, ++}; ++ ++static struct platform_device nslu2_i2c_controller = { ++ .name = "IXP4XX-I2C", ++ .id = 0, ++ .dev = { ++ .platform_data = &nslu2_i2c_gpio_pins, ++ }, ++ .num_resources = 0 ++}; ++ ++static struct resource nslu2_uart_resources[] = { ++ { ++ .start = IXP4XX_UART1_BASE_PHYS, ++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM ++ }, ++ { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM ++ } ++}; ++ ++static struct plat_serial8250_port nslu2_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART1_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART1, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { } ++}; ++ ++static struct platform_device nslu2_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev.platform_data = nslu2_uart_data, ++ .num_resources = 2, ++ .resource = nslu2_uart_resources ++}; ++ ++static struct platform_device *nslu2_devices[] __initdata = { ++ &nslu2_i2c_controller, ++ &nslu2_flash, ++ &nslu2_uart ++}; ++ ++static void n2_power_off(void) ++{ ++ /* This causes the box to drop the power and go dead. */ ++#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 ++ *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; /* enable the pwr cntl gpio */ ++ *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; /* do the deed */ ++} ++ ++static void __init nslu2_init(void) ++{ ++ /* NSLU2 has a 33.00 MHZ crystal, we need to cope with that */ ++ ixp4xx_ticks_per_usec = NSLU2_CLOCK_TICKS_PER_USEC; ++ ++ ixp4xx_sys_init(); ++ ++ pm_power_off = n2_power_off; ++ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); ++} ++ ++MACHINE_START(NSLU2, "Linksys NSLU2") ++ /* Maintainer: www.nslu2-linux.org */ ++ .phys_ram = PHYS_OFFSET, ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, ++ .boot_params = 0x00000100, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, /* FIXME: all irq are off here */ ++ .timer = &ixp4xx_timer, ++ .init_machine = nslu2_init, ++MACHINE_END diff --git a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-include.patch b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-include.patch new file mode 100644 index 0000000000..ab6ac36a93 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-include.patch @@ -0,0 +1,51 @@ +--- linux-2.6.14-rc2/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 01:00:00.000000000 +0100 ++++ test3/include/asm-arm/arch-ixp4xx/nslu2.h 2005-09-24 17:46:04.000000000 +0200 +@@ -0,0 +1,48 @@ ++/* ++ * include/asm-arm/arch-ixp4xx/nslu2.h ++ * ++ * NSLU2 platform specific definitions ++ * ++ * Author: Mark Rakes <mrakes AT mac.com> ++ * Maintainers: http://www.nslu2-linux.org ++ * ++ * based on ixdp425.h: ++ * Copyright 2004 (c) MontaVista, Software, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++// GPIO 8 is used as the power input so is not free for use as a PCI IRQ ++// kas11 11-2-04 ++ ++#ifndef __ASM_ARCH_HARDWARE_H__ ++#error "Do not include this directly, instead #include <asm/hardware.h>" ++#endif ++ ++#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS ++#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE ++ ++#define NSLU2_SDA_PIN 7 ++#define NSLU2_SCL_PIN 6 ++ ++/* ++ * NSLU2 PCI IRQs ++ */ ++#define NSLU2_PCI_MAX_DEV 3 ++#define NSLU2_PCI_IRQ_LINES 3 ++ ++ ++/* PCI controller GPIO to IRQ pin mappings */ ++#define NSLU2_PCI_INTA_PIN 11 ++#define NSLU2_PCI_INTB_PIN 10 ++#define NSLU2_PCI_INTC_PIN 9 ++#define NSLU2_PCI_INTD_PIN 8 ++ ++ ++/* NSLU2 Timer */ ++#define NSLU2_FREQ 66000000 ++#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) ++#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) ++ diff --git a/packages/linux/nslu2-kernel/2.6.14/defconfig b/packages/linux/nslu2-kernel/2.6.14/defconfig new file mode 100644 index 0000000000..553eb6c48e --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/defconfig @@ -0,0 +1,1256 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc2 +# Sat Sep 24 16:05:23 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +CONFIG_MACH_NSLU2=y +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=m +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_IOP3XX is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_X1205=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/nslu2-kernel_2.6.12.2.bb b/packages/linux/nslu2-kernel_2.6.12.2.bb index 7e1a6f293d..ef2f1f6b2c 100644 --- a/packages/linux/nslu2-kernel_2.6.12.2.bb +++ b/packages/linux/nslu2-kernel_2.6.12.2.bb @@ -1,5 +1,15 @@ # Kernel for NSLU2 -PR = "r17" +# +# Increment PR_CONFIG for changes to the nslu2-kernel specific +# defconfig (do *NOT* increment anything in here for changes +# to other kernel configs!) +PR_CONFIG = "0" +# +# Increment the number below (i.e. the digits after PR) when +# making changes within this file or for changes to the patches +# applied to the kernel. +PR = "r17.${PR_CONFIG}" + include nslu2-kernel.inc # N2K_EXTRA_PATCHES - list of patches to apply (can include @@ -25,5 +35,4 @@ N2K_PATCHES = "\ file://timer.patch;patch=1 \ file://nslu2-io_rpbutton.patch;patch=1 \ file://disk_led_blinking.patch;patch=1 \ - file://thumb-swi.patch;patch=1 \ " diff --git a/packages/linux/nslu2-kernel_2.6.12.bb b/packages/linux/nslu2-kernel_2.6.12.bb index a8fa808d3a..73adf4aab0 100644 --- a/packages/linux/nslu2-kernel_2.6.12.bb +++ b/packages/linux/nslu2-kernel_2.6.12.bb @@ -1,5 +1,15 @@ # Kernel for NSLU2 -PR = "r3" +# +# Increment PR_CONFIG for changes to the nslu2-kernel specific +# defconfig (do *NOT* increment anything in here for changes +# to other kernel configs!) +PR_CONFIG = "0" +# +# Increment the number below (i.e. the digits after PR) when +# making changes within this file or for changes to the patches +# applied to the kernel. +PR = "r3.${PR_CONFIG}" + include nslu2-kernel.inc # N2K_EXTRA_PATCHES - list of patches to apply (can include diff --git a/packages/linux/nslu2-kernel_2.6.13.2.bb b/packages/linux/nslu2-kernel_2.6.13.2.bb index 8b2beb76a8..5dcb1a2e9c 100644 --- a/packages/linux/nslu2-kernel_2.6.13.2.bb +++ b/packages/linux/nslu2-kernel_2.6.13.2.bb @@ -1,5 +1,15 @@ # Kernel for NSLU2 -PR = "r0" +# +# Increment PR_CONFIG for changes to the nslu2-kernel specific +# defconfig (do *NOT* increment anything in here for changes +# to other kernel configs!) +PR_CONFIG = "0" +# +# Increment the number below (i.e. the digits after PR) when +# making changes within this file or for changes to the patches +# applied to the kernel. +PR = "r1.${PR_CONFIG}" + include nslu2-kernel.inc # N2K_EXTRA_PATCHES - list of patches to apply (can include @@ -22,7 +32,6 @@ N2K_PATCHES = "\ file://50-nslu2-setup.patch;patch=1 \ file://55-nslu2-rpbutton.patch;patch=1 \ file://anonymiser.patch;patch=1 \ - file://thumb-swi.patch;patch=1 \ " -CMDLINE_REBOOT = "" +CMDLINE_KERNEL_OPTIONS = "" diff --git a/packages/linux/nslu2-kernel_2.6.14-rc2.bb b/packages/linux/nslu2-kernel_2.6.14-rc2.bb index 8b2beb76a8..601003e0cf 100644 --- a/packages/linux/nslu2-kernel_2.6.14-rc2.bb +++ b/packages/linux/nslu2-kernel_2.6.14-rc2.bb @@ -1,5 +1,15 @@ # Kernel for NSLU2 -PR = "r0" +# +# Increment PR_CONFIG for changes to the nslu2-kernel specific +# defconfig (do *NOT* increment anything in here for changes +# to other kernel configs!) +PR_CONFIG = "0" +# +# Increment the number below (i.e. the digits after PR) when +# making changes within this file or for changes to the patches +# applied to the kernel. +PR = "r0.${PR_CONFIG}" + include nslu2-kernel.inc # N2K_EXTRA_PATCHES - list of patches to apply (can include @@ -15,14 +25,17 @@ N2K_FILES = "" N2K_PATCHES = "\ file://10-ixp4xx-copy-from.patch;patch=1 \ - file://20-timer.patch;patch=1 \ + file://10-ixp4xx-gpio.patch;patch=1 \ + file://10-ixp4xx-ticks.patch;patch=1 \ file://30-i2c-x1205.patch;patch=1 \ file://50-nslu2-arch.patch;patch=1 \ + file://50-nslu2-general.patch;patch=1 \ file://50-nslu2-include.patch;patch=1 \ - file://50-nslu2-setup.patch;patch=1 \ - file://55-nslu2-rpbutton.patch;patch=1 \ file://anonymiser.patch;patch=1 \ - file://thumb-swi.patch;patch=1 \ " -CMDLINE_REBOOT = "" +# These options get added to the kernel command line, only put things +# specific to the bootstrap of *this* kernel in here - DISTRO specfic +# config must be in CMDLINE_ROOT (see the full definition of CMDLINE +# in nslu2-kernel.inc) +CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1" diff --git a/packages/linux/openslug-kernel-2.6.14-rc2/.mtn2git_empty b/packages/linux/openslug-kernel-2.6.14-rc2/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/openslug-kernel-2.6.14-rc2/.mtn2git_empty diff --git a/packages/linux/openslug-kernel-2.6.14-rc2/README b/packages/linux/openslug-kernel-2.6.14-rc2/README new file mode 100644 index 0000000000..45bc76579e --- /dev/null +++ b/packages/linux/openslug-kernel-2.6.14-rc2/README @@ -0,0 +1,10 @@ +This directory contains *ONLY* the configuration for an openslug variant of +nslu2-kernel. + +If patches are needed to the kernel they should go into a sub-directory of +nslu2-kernel and they should also almost certainly be added to the nslu2-kernel +.bb files. + +See nslu2-kernel.inc for more information about where things come from, +there is a tree of directories for the patches and files to avoid duplicating +files! diff --git a/packages/linux/openslug-kernel-2.6.14-rc2/defconfig b/packages/linux/openslug-kernel-2.6.14-rc2/defconfig new file mode 100644 index 0000000000..422534267c --- /dev/null +++ b/packages/linux/openslug-kernel-2.6.14-rc2/defconfig @@ -0,0 +1,1542 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc2 +# Sat Sep 24 16:19:17 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +CONFIG_MACH_NSLU2=y +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_PHYSDEV=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=m +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=m + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=m +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_IOP3XX is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_X1205=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +CONFIG_VIDEO_BT848=m +# CONFIG_VIDEO_SAA6588 is not set +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_TUNER_3036=m +CONFIG_VIDEO_STRADIS=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_DPC=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_OVCAMCHIP=m + +# +# Radio Adapters +# +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_VIDEO_VIDEOBUF=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_BUF=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA ARM devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_W9968CF is not set +# CONFIG_USB_PWC is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/openslug-kernel_2.6.12.2.bb b/packages/linux/openslug-kernel_2.6.12.2.bb index 0da5f2ecc7..36010dd40e 100644 --- a/packages/linux/openslug-kernel_2.6.12.2.bb +++ b/packages/linux/openslug-kernel_2.6.12.2.bb @@ -3,3 +3,6 @@ # The only purpose to this is to allow the openslug kernel to # have an openslug specific defconfig - in openslug-kernel-${PV} include nslu2-kernel_${PV}.bb +# Increment the following if the openslug-kernel defconfig is +# changed. +PR_CONFIG = "1" diff --git a/packages/linux/openslug-kernel_2.6.12.bb b/packages/linux/openslug-kernel_2.6.12.bb index 0da5f2ecc7..36010dd40e 100644 --- a/packages/linux/openslug-kernel_2.6.12.bb +++ b/packages/linux/openslug-kernel_2.6.12.bb @@ -3,3 +3,6 @@ # The only purpose to this is to allow the openslug kernel to # have an openslug specific defconfig - in openslug-kernel-${PV} include nslu2-kernel_${PV}.bb +# Increment the following if the openslug-kernel defconfig is +# changed. +PR_CONFIG = "1" diff --git a/packages/linux/openslug-kernel_2.6.13.2.bb b/packages/linux/openslug-kernel_2.6.13.2.bb index 0da5f2ecc7..36010dd40e 100644 --- a/packages/linux/openslug-kernel_2.6.13.2.bb +++ b/packages/linux/openslug-kernel_2.6.13.2.bb @@ -3,3 +3,6 @@ # The only purpose to this is to allow the openslug kernel to # have an openslug specific defconfig - in openslug-kernel-${PV} include nslu2-kernel_${PV}.bb +# Increment the following if the openslug-kernel defconfig is +# changed. +PR_CONFIG = "1" diff --git a/packages/linux/openslug-kernel_2.6.14-rc2.bb b/packages/linux/openslug-kernel_2.6.14-rc2.bb new file mode 100644 index 0000000000..36010dd40e --- /dev/null +++ b/packages/linux/openslug-kernel_2.6.14-rc2.bb @@ -0,0 +1,8 @@ +# OpenSlug Kernel for NSLU2 +# +# The only purpose to this is to allow the openslug kernel to +# have an openslug specific defconfig - in openslug-kernel-${PV} +include nslu2-kernel_${PV}.bb +# Increment the following if the openslug-kernel defconfig is +# changed. +PR_CONFIG = "1" |