diff options
Diffstat (limited to 'packages/linux')
29 files changed, 2990 insertions, 135 deletions
diff --git a/packages/linux/devkitidp-pxa255-2.6.19/.mtn2git_empty b/packages/linux/devkitidp-pxa255-2.6.19/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/devkitidp-pxa255-2.6.19/.mtn2git_empty diff --git a/packages/linux/devkitidp-pxa255-2.6.19/defconfig b/packages/linux/devkitidp-pxa255-2.6.19/defconfig new file mode 100644 index 0000000000..23bf0167f6 --- /dev/null +++ b/packages/linux/devkitidp-pxa255-2.6.19/defconfig @@ -0,0 +1,1156 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19 +# Sat Jan 6 12:58:12 2007 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +CONFIG_ARCH_PXA_IDP=y +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_PXA25x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_XSCALE_PMU=y + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +CONFIG_PCMCIA_DEBUG=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mtdparts=phys_mapped_flash:256k(boot)ro,0x1C0000(kernel),-(root)" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0000000 +CONFIG_MTD_PHYSMAP_LEN=0x4000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_IDPKBD=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_BANDWIDTH=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_TIFM_SD is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/packages/linux/devkitidp-pxa255-2.6.19/linux-2.6.19_devkitidp1.patch b/packages/linux/devkitidp-pxa255-2.6.19/linux-2.6.19_devkitidp1.patch new file mode 100644 index 0000000000..783ecaef43 --- /dev/null +++ b/packages/linux/devkitidp-pxa255-2.6.19/linux-2.6.19_devkitidp1.patch @@ -0,0 +1,1586 @@ +Index: linux-2.6.19/arch/arm/configs/pxa255-idp_defconfig +=================================================================== +--- linux-2.6.19.orig/arch/arm/configs/pxa255-idp_defconfig ++++ linux-2.6.19/arch/arm/configs/pxa255-idp_defconfig +@@ -1,14 +1,13 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.12-rc1-bk2 +-# Sun Mar 27 22:20:17 2005 ++# Linux kernel version: 2.6.13 ++# Fri Sep 2 11:36:29 2005 + # + CONFIG_ARM=y + CONFIG_MMU=y + CONFIG_UID16=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y + CONFIG_GENERIC_CALIBRATE_DELAY=y +-CONFIG_GENERIC_IOMAP=y + + # + # Code maturity level options +@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y + CONFIG_EXPERIMENTAL=y + CONFIG_CLEAN_COMPILE=y + CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 + + # + # General setup +@@ -34,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y + CONFIG_KALLSYMS=y + # CONFIG_KALLSYMS_ALL is not set + # CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_PRINTK=y ++CONFIG_BUG=y + CONFIG_BASE_FULL=y + CONFIG_FUTEX=y + CONFIG_EPOLL=y +@@ -50,11 +52,12 @@ CONFIG_BASE_SMALL=0 + # Loadable module support + # + CONFIG_MODULES=y +-# CONFIG_MODULE_UNLOAD is not set ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y + CONFIG_OBSOLETE_MODPARM=y + # CONFIG_MODVERSIONS is not set + # CONFIG_MODULE_SRCVERSION_ALL is not set +-# CONFIG_KMOD is not set ++CONFIG_KMOD=y + + # + # System Type +@@ -79,6 +82,7 @@ CONFIG_ARCH_PXA=y + # CONFIG_ARCH_VERSATILE is not set + # CONFIG_ARCH_IMX is not set + # CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_AAEC2000 is not set + + # + # Intel PXA2xx Implementations +@@ -98,7 +102,6 @@ CONFIG_CPU_32v5=y + CONFIG_CPU_ABRT_EV5T=y + CONFIG_CPU_CACHE_VIVT=y + CONFIG_CPU_TLB_V4WBI=y +-CONFIG_CPU_MINICACHE=y + + # + # Processor Features +@@ -109,16 +112,35 @@ CONFIG_XSCALE_PMU=y + # + # Bus support + # ++CONFIG_ISA_DMA_API=y + + # + # PCCARD (PCMCIA/CardBus) support + # +-# CONFIG_PCCARD is not set ++CONFIG_PCCARD=y ++CONFIG_PCMCIA_DEBUG=y ++CONFIG_PCMCIA=y ++CONFIG_PCMCIA_LOAD_CIS=y ++CONFIG_PCMCIA_IOCTL=y ++ ++# ++# PC-card bridges ++# ++# CONFIG_TCIC is not set ++CONFIG_PCMCIA_PXA2XX=y + + # + # Kernel Features + # + # CONFIG_PREEMPT is not set ++# CONFIG_NO_IDLE_HZ is not set ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y + CONFIG_LEDS=y + CONFIG_LEDS_TIMER=y + CONFIG_LEDS_CPU=y +@@ -129,7 +151,7 @@ CONFIG_ALIGNMENT_TRAP=y + # + CONFIG_ZBOOT_ROM_TEXT=0x0 + CONFIG_ZBOOT_ROM_BSS=0x0 +-CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M" ++CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mtdparts=phys_mapped_flash:256k(boot)ro,0x1C0000(kernel),-(root)" + # CONFIG_XIP_KERNEL is not set + + # +@@ -157,6 +179,67 @@ CONFIG_BINFMT_ELF=y + # CONFIG_PM is not set + + # ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_PACKET is not set ++CONFIG_UNIX=y ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_IP_TCPDIAG=y ++# CONFIG_IP_TCPDIAG_IPV6 is not set ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_BIC=y ++# CONFIG_IPV6 is not set ++# CONFIG_NETFILTER is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_NET_DIVERT is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++# CONFIG_NET_CLS_ROUTE is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++ ++# + # Device Drivers + # + +@@ -165,7 +248,7 @@ CONFIG_BINFMT_ELF=y + # + CONFIG_STANDALONE=y + CONFIG_PREVENT_FIRMWARE_BUILD=y +-# CONFIG_FW_LOADER is not set ++CONFIG_FW_LOADER=y + # CONFIG_DEBUG_DRIVER is not set + + # +@@ -176,7 +259,7 @@ CONFIG_MTD=y + # CONFIG_MTD_CONCAT is not set + CONFIG_MTD_PARTITIONS=y + # CONFIG_MTD_REDBOOT_PARTS is not set +-# CONFIG_MTD_CMDLINE_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y + # CONFIG_MTD_AFS_PARTS is not set + + # +@@ -209,6 +292,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y + CONFIG_MTD_CFI_I2=y + # CONFIG_MTD_CFI_I4 is not set + # CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_OTP is not set + CONFIG_MTD_CFI_INTELEXT=y + # CONFIG_MTD_CFI_AMDSTD is not set + # CONFIG_MTD_CFI_STAA is not set +@@ -222,10 +306,14 @@ CONFIG_MTD_CFI_UTIL=y + # Mapping drivers for chip access + # + # CONFIG_MTD_COMPLEX_MAPPINGS is not set +-# CONFIG_MTD_PHYSMAP is not set ++CONFIG_MTD_PHYSMAP=y ++CONFIG_MTD_PHYSMAP_START=0x0000000 ++CONFIG_MTD_PHYSMAP_LEN=0x4000000 ++CONFIG_MTD_PHYSMAP_BANKWIDTH=4 + # CONFIG_MTD_ARM_INTEGRATOR is not set + # CONFIG_MTD_EDB7312 is not set + # CONFIG_MTD_SHARP_SL is not set ++# CONFIG_MTD_PLATRAM is not set + + # + # Self-contained MTD device drivers +@@ -260,10 +348,10 @@ CONFIG_MTD_CFI_UTIL=y + # + # Block devices + # +-# CONFIG_BLK_DEV_FD is not set + # CONFIG_BLK_DEV_COW_COMMON is not set + # CONFIG_BLK_DEV_LOOP is not set + # CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set + # CONFIG_BLK_DEV_RAM is not set + CONFIG_BLK_DEV_RAM_COUNT=16 + CONFIG_INITRAMFS_SOURCE="" +@@ -290,9 +378,11 @@ CONFIG_BLK_DEV_IDE=y + # CONFIG_BLK_DEV_IDE_SATA is not set + CONFIG_BLK_DEV_IDEDISK=y + # CONFIG_IDEDISK_MULTI_MODE is not set ++# CONFIG_BLK_DEV_IDECS is not set + # CONFIG_BLK_DEV_IDECD is not set + # CONFIG_BLK_DEV_IDETAPE is not set + # CONFIG_BLK_DEV_IDEFLOPPY is not set ++# CONFIG_BLK_DEV_IDESCSI is not set + # CONFIG_IDE_TASK_IOCTL is not set + + # +@@ -307,89 +397,69 @@ CONFIG_BLK_DEV_IDEDISK=y + # + # SCSI device support + # +-# CONFIG_SCSI is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_PROC_FS=y + + # +-# Multi-device support (RAID and LVM) ++# SCSI support type (disk, tape, CD-ROM) + # +-# CONFIG_MD is not set ++# CONFIG_BLK_DEV_SD is not set ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set + + # +-# Fusion MPT device support ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs + # ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set + + # +-# IEEE 1394 (FireWire) support ++# SCSI Transport Attributes + # ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set + + # +-# I2O device support ++# SCSI low-level drivers + # ++# CONFIG_SCSI_SATA is not set ++# CONFIG_SCSI_DEBUG is not set + + # +-# Networking support ++# PCMCIA SCSI adapter support + # +-CONFIG_NET=y ++# CONFIG_PCMCIA_AHA152X is not set ++# CONFIG_PCMCIA_FDOMAIN is not set ++# CONFIG_PCMCIA_NINJA_SCSI is not set ++# CONFIG_PCMCIA_QLOGIC is not set ++# CONFIG_PCMCIA_SYM53C500 is not set + + # +-# Networking options ++# Multi-device support (RAID and LVM) + # +-# CONFIG_PACKET is not set +-# CONFIG_NETLINK_DEV is not set +-CONFIG_UNIX=y +-# CONFIG_NET_KEY is not set +-CONFIG_INET=y +-# CONFIG_IP_MULTICAST is not set +-# CONFIG_IP_ADVANCED_ROUTER is not set +-CONFIG_IP_PNP=y +-CONFIG_IP_PNP_DHCP=y +-# CONFIG_IP_PNP_BOOTP is not set +-# CONFIG_IP_PNP_RARP is not set +-# CONFIG_NET_IPIP is not set +-# CONFIG_NET_IPGRE is not set +-# CONFIG_ARPD is not set +-# CONFIG_SYN_COOKIES is not set +-# CONFIG_INET_AH is not set +-# CONFIG_INET_ESP is not set +-# CONFIG_INET_IPCOMP is not set +-# CONFIG_INET_TUNNEL is not set +-CONFIG_IP_TCPDIAG=y +-# CONFIG_IP_TCPDIAG_IPV6 is not set +-# CONFIG_IPV6 is not set +-# CONFIG_NETFILTER is not set ++# CONFIG_MD is not set + + # +-# SCTP Configuration (EXPERIMENTAL) ++# Fusion MPT device support + # +-# CONFIG_IP_SCTP is not set +-# CONFIG_ATM is not set +-# CONFIG_BRIDGE is not set +-# CONFIG_VLAN_8021Q is not set +-# CONFIG_DECNET is not set +-# CONFIG_LLC2 is not set +-# CONFIG_IPX is not set +-# CONFIG_ATALK is not set +-# CONFIG_X25 is not set +-# CONFIG_LAPB is not set +-# CONFIG_NET_DIVERT is not set +-# CONFIG_ECONET is not set +-# CONFIG_WAN_ROUTER is not set ++# CONFIG_FUSION is not set + + # +-# QoS and/or fair queueing ++# IEEE 1394 (FireWire) support + # +-# CONFIG_NET_SCHED is not set +-# CONFIG_NET_CLS_ROUTE is not set + + # +-# Network testing ++# I2O device support ++# ++ ++# ++# Network device support + # +-# CONFIG_NET_PKTGEN is not set +-# CONFIG_NETPOLL is not set +-# CONFIG_NET_POLL_CONTROLLER is not set +-# CONFIG_HAMRADIO is not set +-# CONFIG_IRDA is not set +-# CONFIG_BT is not set + CONFIG_NETDEVICES=y + # CONFIG_DUMMY is not set + # CONFIG_BONDING is not set +@@ -402,6 +472,7 @@ CONFIG_NETDEVICES=y + CONFIG_NET_ETHERNET=y + CONFIG_MII=y + CONFIG_SMC91X=y ++# CONFIG_DM9000 is not set + + # + # Ethernet (1000 Mbit) +@@ -421,6 +492,11 @@ CONFIG_SMC91X=y + # CONFIG_NET_RADIO is not set + + # ++# PCMCIA network device support ++# ++# CONFIG_NET_PCMCIA is not set ++ ++# + # Wan interfaces + # + # CONFIG_WAN is not set +@@ -428,6 +504,8 @@ CONFIG_SMC91X=y + # CONFIG_SLIP is not set + # CONFIG_SHAPER is not set + # CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set + + # + # ISDN subsystem +@@ -443,7 +521,7 @@ CONFIG_INPUT=y + # Userland interfaces + # + CONFIG_INPUT_MOUSEDEV=y +-CONFIG_INPUT_MOUSEDEV_PSAUX=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set + CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 + CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 + # CONFIG_INPUT_JOYDEV is not set +@@ -455,11 +533,12 @@ CONFIG_INPUT_EVDEV=y + # Input Device Drivers + # + CONFIG_INPUT_KEYBOARD=y +-CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_ATKBD is not set + # CONFIG_KEYBOARD_SUNKBD is not set + # CONFIG_KEYBOARD_LKKBD is not set + # CONFIG_KEYBOARD_XTKBD is not set + # CONFIG_KEYBOARD_NEWTON is not set ++CONFIG_KEYBOARD_IDPKBD=y + # CONFIG_INPUT_MOUSE is not set + # CONFIG_INPUT_JOYSTICK is not set + # CONFIG_INPUT_TOUCHSCREEN is not set +@@ -470,10 +549,8 @@ CONFIG_KEYBOARD_ATKBD=y + # + CONFIG_SERIO=y + # CONFIG_SERIO_SERPORT is not set +-CONFIG_SERIO_LIBPS2=y + # CONFIG_SERIO_RAW is not set + # CONFIG_GAMEPORT is not set +-CONFIG_SOUND_GAMEPORT=y + + # + # Character devices +@@ -516,18 +593,28 @@ CONFIG_LEGACY_PTY_COUNT=256 + # + # Ftape, the floppy tape device driver + # +-# CONFIG_DRM is not set ++ ++# ++# PCMCIA character devices ++# ++# CONFIG_SYNCLINK_CS is not set + # CONFIG_RAW_DRIVER is not set + + # + # TPM devices + # +-# CONFIG_TCG_TPM is not set + + # + # I2C support + # + # CONFIG_I2C is not set ++# CONFIG_I2C_SENSOR is not set ++ ++# ++# Hardware Monitoring support ++# ++CONFIG_HWMON=y ++# CONFIG_HWMON_DEBUG_CHIP is not set + + # + # Misc devices +@@ -551,10 +638,12 @@ CONFIG_FB_CFB_FILLRECT=y + CONFIG_FB_CFB_COPYAREA=y + CONFIG_FB_CFB_IMAGEBLIT=y + CONFIG_FB_SOFT_CURSOR=y ++# CONFIG_FB_MACMODES is not set + # CONFIG_FB_MODE_HELPERS is not set + # CONFIG_FB_TILEBLITTING is not set + CONFIG_FB_PXA=y + # CONFIG_FB_PXA_PARAMETERS is not set ++# CONFIG_FB_S1D13XXX is not set + # CONFIG_FB_VIRTUAL is not set + + # +@@ -563,15 +652,9 @@ CONFIG_FB_PXA=y + # CONFIG_VGA_CONSOLE is not set + CONFIG_DUMMY_CONSOLE=y + CONFIG_FRAMEBUFFER_CONSOLE=y +-CONFIG_FONTS=y ++# CONFIG_FONTS is not set + CONFIG_FONT_8x8=y + CONFIG_FONT_8x16=y +-# CONFIG_FONT_6x11 is not set +-# CONFIG_FONT_PEARL_8x8 is not set +-# CONFIG_FONT_ACORN_8x8 is not set +-# CONFIG_FONT_MINI_4x6 is not set +-# CONFIG_FONT_SUN8x16 is not set +-# CONFIG_FONT_SUN12x22 is not set + + # + # Logo configuration +@@ -592,7 +675,116 @@ CONFIG_LOGO_LINUX_CLUT224=y + # + CONFIG_USB_ARCH_HAS_HCD=y + # CONFIG_USB_ARCH_HAS_OHCI is not set +-# CONFIG_USB is not set ++CONFIG_USB=y ++CONFIG_USB_DEBUG=y ++ ++# ++# Miscellaneous USB options ++# ++# CONFIG_USB_DEVICEFS is not set ++CONFIG_USB_BANDWIDTH=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_ISP116X_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_BLUETOOTH_TTY is not set ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++CONFIG_USB_HIDINPUT=y ++# CONFIG_HID_FF is not set ++# CONFIG_USB_HIDDEV is not set ++# CONFIG_USB_AIPTEK is not set ++# CONFIG_USB_WACOM is not set ++# CONFIG_USB_ACECAD is not set ++# CONFIG_USB_KBTAB is not set ++# CONFIG_USB_POWERMATE is not set ++# CONFIG_USB_MTOUCH is not set ++# CONFIG_USB_ITMTOUCH is not set ++# CONFIG_USB_EGALAX is not set ++# CONFIG_USB_XPAD is not set ++# CONFIG_USB_ATI_REMOTE is not set ++# CONFIG_USB_KEYSPAN_REMOTE is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB Multimedia devices ++# ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Video4Linux support is needed for USB Multimedia device support ++# ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++CONFIG_USB_MON=y ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGETKIT is not set ++# CONFIG_USB_PHIDGETSERVO is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_LD is not set ++ ++# ++# USB DSL modem support ++# + + # + # USB Gadget Support +@@ -602,17 +794,23 @@ CONFIG_USB_ARCH_HAS_HCD=y + # + # MMC/SD Card support + # +-# CONFIG_MMC is not set ++CONFIG_MMC=y ++CONFIG_MMC_DEBUG=y ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_PXA=y ++# CONFIG_MMC_WBSD is not set + + # + # File systems + # + CONFIG_EXT2_FS=y + # CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set + # CONFIG_EXT3_FS is not set + # CONFIG_JBD is not set + # CONFIG_REISERFS_FS is not set + # CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set + + # + # XFS support +@@ -620,6 +818,7 @@ CONFIG_EXT2_FS=y + # CONFIG_XFS_FS is not set + # CONFIG_MINIX_FS is not set + # CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y + # CONFIG_QUOTA is not set + CONFIG_DNOTIFY=y + # CONFIG_AUTOFS_FS is not set +@@ -636,8 +835,9 @@ CONFIG_DNOTIFY=y + # + CONFIG_FAT_FS=y + CONFIG_MSDOS_FS=y +-# CONFIG_VFAT_FS is not set ++CONFIG_VFAT_FS=y + CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" + # CONFIG_NTFS_FS is not set + + # +@@ -645,7 +845,6 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437 + # + CONFIG_PROC_FS=y + CONFIG_SYSFS=y +-# CONFIG_DEVFS_FS is not set + # CONFIG_DEVPTS_FS_XATTR is not set + # CONFIG_TMPFS is not set + # CONFIG_HUGETLB_PAGE is not set +@@ -664,8 +863,7 @@ CONFIG_RAMFS=y + # CONFIG_JFFS_FS is not set + CONFIG_JFFS2_FS=y + CONFIG_JFFS2_FS_DEBUG=0 +-# CONFIG_JFFS2_FS_NAND is not set +-# CONFIG_JFFS2_FS_NOR_ECC is not set ++CONFIG_JFFS2_FS_WRITEBUFFER=y + # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set + CONFIG_JFFS2_ZLIB=y + CONFIG_JFFS2_RTIME=y +@@ -687,6 +885,7 @@ CONFIG_NFS_FS=y + # CONFIG_NFSD is not set + CONFIG_ROOT_NFS=y + CONFIG_LOCKD=y ++CONFIG_NFS_COMMON=y + CONFIG_SUNRPC=y + # CONFIG_RPCSEC_GSS_KRB5 is not set + # CONFIG_RPCSEC_GSS_SPKM3 is not set +Index: linux-2.6.19/arch/arm/mach-pxa/Kconfig +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-pxa/Kconfig ++++ linux-2.6.19/arch/arm/mach-pxa/Kconfig +@@ -21,7 +21,7 @@ config MACH_MAINSTONE + select IWMMXT + + config ARCH_PXA_IDP +- bool "Accelent Xscale IDP" ++ bool "DevKitIDP PXA255" + select PXA25x + + config PXA_SHARPSL +Index: linux-2.6.19/drivers/input/keyboard/idpkbd.c +=================================================================== +--- /dev/null ++++ linux-2.6.19/drivers/input/keyboard/idpkbd.c +@@ -0,0 +1,418 @@ ++/* ++ * DevKitIDP PXA255 matrix keyboard driver ++ * Copyright (C) 2005 BSQUARE ++ * David Plentovich <davidp@bsquare.com> ++ * ++ * Based on (2.4.x) driver/char/asi_keyboard.c - Cliff Brake ++ */ ++ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ */ ++ ++#include <linux/stddef.h> ++ ++#include <linux/input.h> ++#include <linux/module.h> ++#include <linux/init.h> ++ ++#include <linux/timer.h> ++#include <linux/sched.h> ++#include <linux/delay.h> ++ ++#include <linux/types.h> ++#include <linux/keyboard.h> ++#include <linux/kd.h> ++ ++#include <asm/irq.h> ++#include <asm/io.h> ++ ++//#include <asm/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/idp.h> ++ ++MODULE_AUTHOR("David Plentovich <davidp@bsquare.com>"); ++MODULE_DESCRIPTION("DevKitIDP PXA255 matrix keyboard driver"); ++MODULE_LICENSE("GPL"); ++ ++ ++//NOTE: Platform HW specific settings are defined in include/asm-arm/arch-pxa/idp.h ++ ++ ++// set to true to use timers to poll keyboard ++#define POLL_KEYBOARD 1 ++ ++ ++// local variables ++ ++#define FN_KEY_SCANCODE 4 //scancode returned when Fn key pressed ++#define NUMLOCK_KEY_SCANCODE 10 //scancode returned when NumLock key pressed ++ ++// keyboard matrix 14 columns by 7 rows ++static unsigned char idpkbd_keycode[(KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS)] = { \ ++ KEY_LEFTALT, KEY_GRAVE, 0, KEY_LEFTCTRL, 0, KEY_ESC, KEY_1, KEY_2, KEY_9, KEY_0, KEY_MINUS, KEY_EQUAL, 0, KEY_BACKSPACE, \ ++ 0, KEY_BACKSLASH, KEY_LEFTSHIFT, 0, 0, KEY_DELETE, 0, KEY_T, KEY_Y, KEY_U, KEY_I, KEY_ENTER, KEY_RIGHTSHIFT, KEY_DOWN, \ ++ 0, KEY_TAB, 0, 0, 0, KEY_Q, KEY_W, KEY_E, KEY_R, KEY_O, KEY_P, KEY_LEFTBRACE, 0, KEY_RIGHTBRACE, \ ++ 0, KEY_Z, 0, 0, 0, KEY_CAPSLOCK, 0, 0, KEY_K, KEY_L, KEY_SEMICOLON, KEY_APOSTROPHE, 0, KEY_UP, \ ++ 0, KEY_A, 0, 0, 0, KEY_S, KEY_D, KEY_F, KEY_G, KEY_H, KEY_J, KEY_SLASH, 0, KEY_LEFT, \ ++ 0, KEY_X, 0, 0, 0, KEY_C, KEY_V, KEY_B, KEY_N, KEY_M, KEY_COMMA, KEY_DOT, 0, KEY_SPACE, \ ++ 0, 0, 0, 0, 0, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, 0, 0, KEY_RIGHT \ ++}; ++ ++// function key keyboard matrix 14 columns by 7 rows ++//TODO: change Fn key for +/= to be shifted version of KEY_PAUSE (instead of KEY_BACK) ++static unsigned char idpkbd_fn_keycode[(KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS)] = { \ ++ 0, 0, 0, 0, 0, 0, KEY_F1, KEY_F2, KEY_F9, KEY_F10, 0, KEY_BACK, 0, 0, \ ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PAGEDOWN, \ ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PAUSE, 0, KEY_SCROLLLOCK, \ ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PRINT, KEY_SYSRQ, 0, KEY_PAGEUP, \ ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_HOME, \ ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ ++ 0, 0, 0, 0, 0, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, 0, 0, KEY_END \ ++}; ++ ++//NOTE: NUMLOCK and NumKeypad are not supported; keys are already accessable in other ways. ++ ++int idpkbd_used = 0; ++int fn_key_active = 0; ++ ++static struct input_dev * idpkbd_dev; ++ ++static int scaninterval = HZ/60; //rate to scan keyboard ++static struct timer_list scan_timer; ++ ++ ++// Note: these are not hardware dependent masks, they are ++// just simple n-bit masks based on the number of ins and outs ++// All hardware dependent matrix keyboard stuff is in portable.h ++#define KEYBD_MATRIX_INPUT_MASK ((1 << KEYBD_MATRIX_NUMBER_INPUTS)-1) ++#define KEYBD_MATRIX_OUTPUT_MASK ((1 << KEYBD_MATRIX_NUMBER_OUTPUTS)-1) ++ ++static __u16 keystate_prev[KEYBD_MATRIX_NUMBER_OUTPUTS]; ++static __u16 keystate_test[KEYBD_MATRIX_NUMBER_OUTPUTS]; ++static __u16 keystate_cur [KEYBD_MATRIX_NUMBER_OUTPUTS]; ++static int keystate_prev_active = 0; //FALSE; ++static int keystate_stable_ctr = 0; ++ ++ ++ ++/* local function definitions */ ++static void setoutput(__u16 columns) ++{ ++ #ifdef KEYBD_MATRIX_INVERT_OUTPUT_LOGIC ++ KEYBD_MATRIX_SET_OUTPUTS(~columns); ++ #else ++ KEYBD_MATRIX_SET_OUTPUTS(columns); ++ #endif ++} ++ ++static __u16 scaninput(void) ++{ ++ __u32 inputs; ++ ++ KEYBD_MATRIX_GET_INPUTS(inputs); ++ ++ #ifdef KEYBD_MATRIX_INVERT_INPUT_LOGIC ++ return (__u16)(~inputs & KEYBD_MATRIX_INPUT_MASK); ++ #else ++ return (__u16)(inputs & KEYBD_MATRIX_INPUT_MASK); ++ #endif ++} ++ ++static int dokeystatetransition(void) ++{ ++ unsigned char code; ++ int i, j; ++ __u16 keystate_xor[KEYBD_MATRIX_NUMBER_OUTPUTS]; ++ int ret_val = 0; //FALSE; ++ //int bFoundValidScancode = FALSE; ++ ++ /* iterate over columns */ ++ for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++) ++ { ++ if (keystate_cur[i] != 0) ++ ret_val = 1; //TRUE; ++ ++ keystate_xor[i] = keystate_prev[i] ^ keystate_cur[i]; ++ if (keystate_xor[i] != 0) ++ { ++ /* at least one matrix switch was changed, set backlight activity detect flag */ ++ //vpDriverGlobals->misc.BacklightActivity = 1; ++ ++ /* iterate over rows */ ++ for (j = 0; j < KEYBD_MATRIX_NUMBER_INPUTS; j++) ++ { ++ if (keystate_xor[i] & (1 << j)) ++ { ++ code = (j * KEYBD_MATRIX_NUMBER_OUTPUTS) + i; ++ /* figure out if key is pressed or released and process */ ++ ++ // support alt keymap for function keys ++ if (code == FN_KEY_SCANCODE) ++ { ++ fn_key_active = (keystate_cur[i] & (1 << j)) ? 1 : 0; ++ } ++ else ++ { ++ if (fn_key_active) ++ { ++// printk("matrix %i, key %i, up/down %i\n", code, idpkbd_fn_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0); ++ input_report_key(idpkbd_dev, idpkbd_fn_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0); ++ } ++ else ++ { ++// printk("matrix %i, key %i, up/down %i\n", code, idpkbd_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0); ++ input_report_key(idpkbd_dev, idpkbd_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0); ++ } ++ } ++ ++ } ++ } ++ input_sync(idpkbd_dev); ++ } ++ keystate_prev[i] = keystate_cur[i]; ++ } ++ ++ return ret_val; ++} ++ ++ ++// handles keyboard keypress ++#if POLL_KEYBOARD ++static void idpkbd_scan_keyboard(unsigned long dummy) ++{ ++ __u16 cs; /* column status */ ++ int i; ++// printk(KERN_INFO "%s:\n", __FUNCTION__); ++ ++#define SCAN_START 0 /* start of scan state machine */ ++#define SCAN_GETSTATE 1 /* get keyboard state */ ++#define SCAN_STAB 2 /* wait for key to stabalize */ ++ ++ /* start of keyboard scanning sequence */ ++ /* Always start with an all-column scan */ ++ setoutput( KEYBD_MATRIX_OUTPUT_MASK ); ++ udelay( KEYBD_MATRIX_SETTLING_TIME_US ); ++ cs = scaninput(); ++ ++// printk("cs = %x\n", cs); ++// printk("keystate_stable_ctr = %d\n", keystate_stable_ctr); ++// printk("keystate_pre_active = %d\n", keystate_prev_active); ++// printk("\n"); ++ ++ /* ++ * if no keys were down in previous state AND we are ++ * not in stablizing mode AND the all-column scan ++ * is 0, then keyboard is idle. ++ */ ++ ++ if ((! keystate_prev_active) && (keystate_stable_ctr == 0) && (cs == 0)) ++ goto scan_done; ++ ++ /* Get the current state of the keyboard */ ++ if (cs == 0) ++ { ++ for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++) ++ { ++ keystate_cur[i] = 0; ++ } ++ } ++ else ++ { ++ for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++) ++ { ++ setoutput ( 1 << i ); ++ udelay(KEYBD_MATRIX_SETTLING_TIME_US); ++ keystate_cur[i] = scaninput(); ++ } ++ } ++ ++ /* Handle the stablizing case first */ ++ if (keystate_stable_ctr > 0) ++ { ++ ++ /* Compare the current state against the test state */ ++ cs = 1; ++ for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++) ++ { ++ if (keystate_cur[i] != keystate_test[i]) ++ { ++ cs = 0; ++ break; ++ } ++ } ++ ++ // Are the states the same ? ++ if (cs) ++ { ++ ++ keystate_stable_ctr; ++ if (keystate_stable_ctr == KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT) ++ { ++ keystate_prev_active = dokeystatetransition(); ++ keystate_stable_ctr = 0; ++ } ++ goto scan_done; ++ } ++ else ++ { ++ keystate_stable_ctr = 0; // Clear stable counter and fall through to next stage ++ } ++ } ++ ++ // Compare the current state against the previous state ++ cs = 1; ++ for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++) ++ { ++ if (keystate_cur[i] != keystate_prev[i]) ++ { ++ cs = 0; ++ break; ++ } ++ } ++ ++ // If the states are different, begin waiting for stablizing ++ if (! cs) ++ { ++ for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++) ++ { ++ keystate_test[i] = keystate_cur[i]; ++ } ++ keystate_stable_ctr = 1; ++ } ++ ++scan_done: ++ // reload timer for next scan ++ mod_timer(&scan_timer, jiffies + scaninterval); ++} ++#else ++static void idpkbd_interrupt(int irq, void *dummy, struct pt_regs *fp) ++{ ++// printk(KERN_INFO "%s:\n", __FUNCTION__); ++ ++ input_report_key(idpkbd_dev, BTN_0, inb(IDPKBD_PORT) & 1); ++ input_sync(idpkbd_dev); ++} ++#endif ++ ++//TODO: Verify Events operation ++// handles keyboard LED and beep events ++int idpkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) ++{ ++// printk(KERN_INFO "%s:\n", __FUNCTION__); ++ ++ if (type == EV_SND && code == SND_BELL) { ++//x outb(value, IDPKBD_BELL); ++ return 0; ++ } ++ ++ if (type == EV_LED) { ++// TODO: ++ return 0; ++ } ++ ++ return -1; ++} ++ ++static int idpkbd_open(struct input_dev *dev) ++{ ++// printk(KERN_INFO "%s:\n", __FUNCTION__); ++ ++ if (idpkbd_used++) ++ return 0; ++ ++#if POLL_KEYBOARD ++ // start timer to scan matrix keyboard ++ init_timer(&scan_timer); ++ scan_timer.function = idpkbd_scan_keyboard; ++ mod_timer(&scan_timer, jiffies + scaninterval); ++#else ++ if (request_irq(IDPKBD_IRQ, idpkbd_interrupt, 0, "idpkbd", NULL)) { ++ printk(KERN_ERR "idpkbd.c: Can't allocate irq %d\n", idpkbd_irq); ++ idpkbd_used--; ++ return -EBUSY; ++ } ++#endif ++ ++ return 0; ++} ++ ++static void idpkbd_close(struct input_dev *dev) ++{ ++// printk(KERN_INFO "%s:\n", __FUNCTION__); ++ ++ if (!--idpkbd_used) { ++#if POLL_KEYBOARD ++ // stop timer ++ del_timer(&scan_timer); ++#else ++ free_irq(IDPKBD_IRQ, idpkbd_interrupt); ++#endif ++ } ++} ++ ++static int __init idpkbd_init(void) ++{ ++ int i; ++// printk(KERN_INFO "%s:\n", __FUNCTION__); ++ ++ idpkbd_dev = input_allocate_device(); ++ ++ // fill in driver information ++ idpkbd_dev->name = "DevKitIDP PXA255 matrix keyboard"; ++ idpkbd_dev->phys = "idpkdb/input0"; ++// idpkbd_dev.id.bustype = BUS_MATRIX; ++ idpkbd_dev->id.vendor = 0x0001; ++ idpkbd_dev->id.product = 0x0001; ++ idpkbd_dev->id.version = 0x0100; ++ ++ // fill in function pointers ++ idpkbd_dev->open = idpkbd_open; ++ idpkbd_dev->close = idpkbd_close; ++ idpkbd_dev->event = idpkbd_event; ++ ++ // setup available keypresses ++ idpkbd_dev->evbit[0] = BIT(EV_KEY); ++// idpkbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); ++ idpkbd_dev->keycode = idpkbd_keycode; ++ idpkbd_dev->keycodesize = sizeof(unsigned char); ++// idpkbd_dev.keycodemax = ARRAY_SIZE(idpkbd_keycode); ++ idpkbd_dev->keycodemax = ARRAY_SIZE(idpkbd_keycode) + ARRAY_SIZE(idpkbd_fn_keycode); ++ ++ for (i = 0; i < (KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS); i++) ++ { ++ if (idpkbd_keycode[i]) ++ set_bit(idpkbd_keycode[i], idpkbd_dev->keybit); ++ if (idpkbd_fn_keycode[i]) ++ set_bit(idpkbd_fn_keycode[i], idpkbd_dev->keybit); ++ } ++ ++ input_register_device(idpkbd_dev); ++ ++ printk(KERN_INFO "input: %s\n", idpkbd_dev->name); ++ return 0; ++} ++ ++static void __exit idpkbd_exit(void) ++{ ++// printk(KERN_INFO "%s:\n", __FUNCTION__); ++ ++ input_unregister_device(idpkbd_dev); ++} ++ ++module_init(idpkbd_init); ++module_exit(idpkbd_exit); ++ ++ +Index: linux-2.6.19/drivers/input/keyboard/Kconfig +=================================================================== +--- linux-2.6.19.orig/drivers/input/keyboard/Kconfig ++++ linux-2.6.19/drivers/input/keyboard/Kconfig +@@ -203,4 +203,14 @@ config KEYBOARD_OMAP + To compile this driver as a module, choose M here: the + module will be called omap-keypad. + ++config KEYBOARD_IDPKBD ++ tristate "IDP matrix scan keyboard" ++ depends on ARCH_PXA_IDP && INPUT && INPUT_KEYBOARD ++ help ++ Say Y here if you are running Linux on a DevKitIDP PXA255 and want ++ to use the attached matrix scan keyboard. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called idpkbd. ++ + endif +Index: linux-2.6.19/drivers/input/keyboard/Makefile +=================================================================== +--- linux-2.6.19.orig/drivers/input/keyboard/Makefile ++++ linux-2.6.19/drivers/input/keyboard/Makefile +@@ -4,6 +4,7 @@ + + # Each configuration option enables a list of files. + ++obj-$(CONFIG_KEYBOARD_IDPKBD) += idpkbd.o + obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o + obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o + obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o +Index: linux-2.6.19/drivers/pcmcia/Makefile +=================================================================== +--- linux-2.6.19.orig/drivers/pcmcia/Makefile ++++ linux-2.6.19/drivers/pcmcia/Makefile +@@ -68,5 +68,6 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa + + pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o + pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o ++pxa2xx_cs-$(CONFIG_ARCH_PXA_IDP) += pxa2xx_idp.o + pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o + +Index: linux-2.6.19/drivers/pcmcia/pxa2xx_idp.c +=================================================================== +--- /dev/null ++++ linux-2.6.19/drivers/pcmcia/pxa2xx_idp.c +@@ -0,0 +1,392 @@ ++/* ++ * linux/drivers/pcmcia/pxa2xx_idp.c ++ * ++ * DevKitIDP PXA255 PCMCIA specific routines. ++ * Copyright (C) 2005 BSQUARE ++ * David Plentovich <davidp@bsquare.com> ++ * ++ * Based on pxa2xx_mainstone.c - Nicolas Pitre ++ * Based on (2.4.x) driver/pcmcia/pxa/pxa_idp.c - Jeff Sutherland ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <linux/interrupt.h> ++#include <linux/device.h> ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++ ++#include <pcmcia/ss.h> ++ ++#include <asm/hardware.h> ++#include <asm/irq.h> ++ ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/idp.h> ++ ++#include "soc_common.h" ++ ++#define IDP_S0_CD_IRQ PCMCIA_S0_CD_VALID ++#define IDP_S1_CD_IRQ PCMCIA_S1_CD_VALID ++#define IDP_S0_IRQ PCMCIA_S0_RDYINT ++#define IDP_S1_IRQ PCMCIA_S1_RDYINT ++ ++static struct pcmcia_irqs irqs[] = { ++ { 0, IDP_S0_CD_IRQ, "PCMCIA0 CD" }, ++ { 1, IDP_S1_CD_IRQ, "PCMCIA1 CD" }, ++}; ++ ++ ++static int idp_pcmcia_hw_init_cnt = 0; ++ ++ ++static int idp_pcmcia_hw_init(struct soc_pcmcia_socket *skt) ++{ ++ printk("%s: socket %i\n", __FUNCTION__, skt->nr); //dcp ++ ++ if (!idp_pcmcia_hw_init_cnt++) ++ { ++ /* Set PCMCIA Socket 0 power to standby mode. ++ * PXA IDP has dedicated CPLD pins for all this stuff :-) ++ */ ++ IDP_CPLD_PCCARD_EN = PCC0_ENABLE | PCC1_ENABLE; //both slots disabled, reset NOT active ++ IDP_CPLD_PCCARD_PWR = 0; //all power to both slots off ++ ++ /* ++ * Setup default state of GPIO outputs ++ * before we enable them as outputs. ++ */ ++ GPSR(GPIO48_nPOE) = ++ GPIO_bit(GPIO48_nPOE) | ++ GPIO_bit(GPIO49_nPWE) | ++ GPIO_bit(GPIO50_nPIOR) | ++ GPIO_bit(GPIO51_nPIOW) | ++ GPIO_bit(GPIO52_nPCE_1) | ++ GPIO_bit(GPIO53_nPCE_2); ++ ++ pxa_gpio_mode(GPIO48_nPOE_MD); ++ pxa_gpio_mode(GPIO49_nPWE_MD); ++ pxa_gpio_mode(GPIO50_nPIOR_MD); ++ pxa_gpio_mode(GPIO51_nPIOW_MD); ++ pxa_gpio_mode(GPIO52_nPCE_1_MD); ++ pxa_gpio_mode(GPIO53_nPCE_2_MD); ++ pxa_gpio_mode(GPIO54_pSKTSEL_MD); ++ pxa_gpio_mode(GPIO55_nPREG_MD); ++ pxa_gpio_mode(GPIO56_nPWAIT_MD); ++ pxa_gpio_mode(GPIO57_nIOIS16_MD); ++ ++#if 0 //x ++ GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID)); ++ GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID)); ++ ++ set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID), GPIO_BOTH_EDGES); ++ set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID), GPIO_BOTH_EDGES); ++ ++ //irq's for slots: ++ GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT)); ++ GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT)); ++ ++ set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT), GPIO_FALLING_EDGE); ++ set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT), GPIO_FALLING_EDGE); ++#endif //x ++ } ++ ++#if 0 //x ++ return_val = request_irq(PCMCIA_S0_CD_VALID, init->handler, SA_INTERRUPT, "PXA PCMCIA CD0", NULL); ++ ++ if (return_val < 0) ++ return -1; ++ ++ return_val += request_irq(PCMCIA_S1_CD_VALID, init->handler, SA_INTERRUPT, "PXA PCMCIA CD1", NULL); ++ ++ if (return_val < 0) { ++ free_irq(PCMCIA_S0_CD_VALID, NULL); ++ return -1; ++ } ++ ++ return 2; ++ ++#endif //x ++ skt->irq = (skt->nr == 0) ? IDP_S0_IRQ : IDP_S1_IRQ; ++ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); ++} ++ ++static void idp_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) ++{ ++//x free_irq(PCMCIA_S0_CD_VALID, NULL); ++//x free_irq(PCMCIA_S1_CD_VALID, NULL); ++ ++ printk("%s: socket %i\n", __FUNCTION__, skt->nr); //dcp ++ ++ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); ++ ++ if (!--idp_pcmcia_hw_init_cnt) ++ { ++ IDP_CPLD_PCCARD_EN = 0x03; //disable slots ++ udelay(200); ++ IDP_CPLD_PCCARD_PWR = 0; //shut off all power ++ } ++} ++ ++//x static unsigned long idp_pcmcia_status[2]; ++ ++static void idp_pcmcia_socket_state(struct soc_pcmcia_socket *skt, ++ struct pcmcia_state *state) ++{ ++ unsigned long status; ++ volatile unsigned long *stat_regs[2] = { &IDP_CPLD_PCCARD0_STATUS, &IDP_CPLD_PCCARD1_STATUS }; ++// printk("%s: socket %i\n", __FUNCTION__, skt->nr); //dcp ++ ++//x status = (skt->nr == 0) ? IDP_PCMCIA0 : IDP_PCMCIA1; ++ status = *stat_regs[skt->nr]; ++//x flip = (status ^ idp_pcmcia_status[skt->nr]) & IDP_PCMCiIA_nSTSCHG_BVD1; ++ ++#if 0 //x ++ /* ++ * Workaround for STSCHG which can't be deasserted: ++ * We therefore disable/enable corresponding IRQs ++ * as needed to avoid IRQ locks. ++ */ ++ if (flip) { ++ idp_pcmcia_status[skt->nr] = status; ++ if (status & IDP_PCMCIA_nSTSCHG_BVD1) ++ enable_irq( (skt->nr == 0) ? IDP_S0_STSCHG_IRQ ++ : IDP_S1_STSCHG_IRQ ); ++ else ++ disable_irq( (skt->nr == 0) ? IDP_S0_STSCHG_IRQ ++ : IDP_S1_STSCHG_IRQ ); ++ } ++#endif //x ++ ++//x state->detect = (status & IDP_PCMCIA_nCD) ? 0 : 1; ++ state->detect = (PCC_DETECT(skt->nr)) ? 0 : 1; // this one is gpio ++ state->ready = (status & _PCC_IRQ) ? 1 : 0; ++ state->bvd1 = (status & PCC_BVD1) ? 1 : 0; ++ state->bvd2 = (status & PCC_BVD2) ? 1 : 0; ++ state->wrprot = (status & _PCC_WRPROT) ? 1 : 0; ++ state->vs_3v = (status & PCC_VS1) ? 0 : 1; ++ state->vs_Xv = (status & PCC_VS2) ? 0 : 1; ++ ++#if 0 ++ printk("%s: Sock %u flags: %s%s%s%s%s%s%s\n",__FUNCTION__,skt->nr, ++ (state->detect) ? "DET " : "", ++ (state->ready) ? "RDY " : "", ++ (state->bvd1) ? "BVD1 " : "", ++ (state->bvd2) ? "BVD2 " : "", ++ (state->wrprot) ? "WRPROT " : "", ++ (state->vs_3v) ? "VS_3V " : "", ++ (state->vs_Xv) ? "VS_XV " : ""); ++#endif ++} ++ ++static int idp_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, ++ const socket_state_t *state) ++{ ++ /* The PXA Idp uses the Maxim MAX1602, with the following connections: ++ * ++ * Socket 0 (PCMCIA): ++ * MAX1602 PXA_IDP Register ++ * Pin Signal IDP_CPLD_PCCARD_PWR: ++ * ----- ------- ---------------------- ++ * A0VPP PCC0_PWR0 bit0 ++ * A1VPP PCC0_PWR1 bit1 ++ * A0VCC PCC0_PWR2 bit2 ++ * A1VCC PCC0_PWR3 bit3 ++ * VX VCC ++ * VY +3.3V ++ * 12IN +12V ++ * CODE +3.3V Cirrus Code, CODE = High (VY) ++ * ++ * Socket 1 (PCMCIA): ++ * MAX1602 PXA_IDP Register ++ * Pin Signal IDP_CPLD_PCCARD_PWR: ++ * ----- ------- ---------------------- ++ * A0VPP PCC1_PWR0 bit4 ++ * A1VPP PCC1_PWR1 bit5 ++ * A0VCC PCC1_PWR2 bit6 ++ * A1VCC PCC1_PWR3 bit7 ++ * VX VCC ++ * VY +3.3V ++ * 12IN +12V ++ * CODE +3.3V Cirrus Code, CODE = High (VY) ++ * ++ */ ++ ++ printk("%s: socket %i %i %i\n", __FUNCTION__, skt->nr, state->Vcc, state->Vpp); //dcp ++ ++ switch (skt->nr) { ++ case 0: ++ switch (state->Vcc) { ++ case 0: ++ IDP_CPLD_PCCARD_EN |= PCC0_ENABLE; // disable socket ++ udelay(200); ++ IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3); ++ break; ++ ++ case 33: ++ IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3); ++ IDP_CPLD_PCCARD_PWR |= PCC0_PWR3; ++ IDP_CPLD_PCCARD_EN &= ~PCC0_ENABLE; //turn it on ++ break; ++ ++ case 50: ++ IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3); ++ IDP_CPLD_PCCARD_PWR |= PCC0_PWR2; ++ IDP_CPLD_PCCARD_EN &= ~PCC0_ENABLE; ++ break; ++ ++ default: ++ printk(KERN_ERR "%s(): bad Vcc %u\n", __FUNCTION__, state->Vcc); ++ return -1; ++ } ++ ++ switch (state->Vpp) { ++ case 0: ++ IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR0 | PCC0_PWR1); ++ break; ++ ++ case 120: ++ IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR0 | PCC0_PWR1); ++ IDP_CPLD_PCCARD_PWR |= PCC0_PWR1; ++ break; ++ ++ default: ++ if(state->Vpp == state->Vcc) { ++ IDP_CPLD_PCCARD_PWR = (IDP_CPLD_PCCARD_PWR & ~(PCC0_PWR0 | PCC0_PWR1)) | PCC0_PWR0; ++ } ++ else { ++ printk(KERN_ERR "%s(): bad Vpp %u\n", __FUNCTION__, state->Vpp); ++ return -1; ++ } ++ } ++ ++ if (state->flags & SS_RESET) { ++ IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN | PCC0_RESET); ++ printk("RESET\n"); ++ } ++ else ++ IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN & ~PCC0_RESET); ++ ++ break; ++ ++ case 1: ++ switch (state->Vcc) { ++ case 0: ++ IDP_CPLD_PCCARD_EN |= PCC1_ENABLE; // disable socket ++ udelay(200); ++ IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3); ++ break; ++ ++ case 33: ++ IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3); ++ IDP_CPLD_PCCARD_PWR |= PCC1_PWR3; ++ IDP_CPLD_PCCARD_EN &= ~PCC1_ENABLE; //turn it on ++ break; ++ ++ case 50: ++ IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3); ++ IDP_CPLD_PCCARD_PWR |= PCC1_PWR2; ++ IDP_CPLD_PCCARD_EN &= ~PCC1_ENABLE; ++ break; ++ ++ default: ++ printk(KERN_ERR "%s(): bad Vcc %u\n", __FUNCTION__, state->Vcc); ++ return -1; ++ } ++ ++ switch (state->Vpp) { ++ case 0: ++ IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR0 | PCC1_PWR1); ++ break; ++ ++ case 120: ++ IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR0 | PCC1_PWR1); ++ IDP_CPLD_PCCARD_PWR |= PCC1_PWR1; ++ break; ++ ++ default: ++ if(state->Vpp == state->Vcc) { ++ IDP_CPLD_PCCARD_PWR = (IDP_CPLD_PCCARD_PWR & ~(PCC1_PWR0 | PCC1_PWR1)) | PCC1_PWR0; ++ } ++ else { ++ printk(KERN_ERR "%s(): bad Vpp %u\n", __FUNCTION__, state->Vpp); ++ return -1; ++ } ++ } ++ ++ if (state->flags & SS_RESET) { ++ IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN | PCC1_RESET); ++ printk("RESET\n"); ++ } ++ else ++ IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN & ~PCC1_RESET); ++ ++ break; ++ } ++ return 0; ++} ++ ++static void idp_pcmcia_socket_init(struct soc_pcmcia_socket *skt) ++{ ++ printk("%s: socket %i\n", __FUNCTION__, skt->nr); //dcp ++} ++ ++static void idp_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) ++{ ++ printk("%s: socket %i\n", __FUNCTION__, skt->nr); //dcp ++} ++ ++static struct pcmcia_low_level idp_pcmcia_ops = { ++ .owner = THIS_MODULE, ++ .hw_init = idp_pcmcia_hw_init, ++ .hw_shutdown = idp_pcmcia_hw_shutdown, ++ .socket_state = idp_pcmcia_socket_state, ++ .configure_socket = idp_pcmcia_configure_socket, ++ .socket_init = idp_pcmcia_socket_init, ++ .socket_suspend = idp_pcmcia_socket_suspend, ++ .nr = 2, ++}; ++ ++static struct platform_device *idp_pcmcia_device; ++ ++static int __init idp_pcmcia_init(void) ++{ ++ int ret; ++ printk("%s\n", __FUNCTION__); //dcp ++ ++ idp_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); ++ if (!idp_pcmcia_device) ++ return -ENOMEM; ++ memset(idp_pcmcia_device, 0, sizeof(*idp_pcmcia_device)); ++ idp_pcmcia_device->name = "pxa2xx-pcmcia"; ++ idp_pcmcia_device->dev.platform_data = &idp_pcmcia_ops; ++ ++ ret = platform_device_register(idp_pcmcia_device); ++ if (ret) ++ kfree(idp_pcmcia_device); ++ ++ return ret; ++} ++ ++static void __exit idp_pcmcia_exit(void) ++{ ++ printk("%s\n", __FUNCTION__); //dcp ++ /* ++ * This call is supposed to free our idp_pcmcia_device. ++ * Unfortunately platform_device don't have a free method, and ++ * we can't assume it's free of any reference at this point so we ++ * can't free it either. ++ */ ++ platform_device_unregister(idp_pcmcia_device); ++} ++ ++module_init(idp_pcmcia_init); ++module_exit(idp_pcmcia_exit); ++ ++MODULE_LICENSE("GPL"); +Index: linux-2.6.19/include/asm-arm/arch-pxa/idp.h +=================================================================== +--- linux-2.6.19.orig/include/asm-arm/arch-pxa/idp.h ++++ linux-2.6.19/include/asm-arm/arch-pxa/idp.h +@@ -179,15 +179,15 @@ + #define KEYBD_MATRIX_NUMBER_INPUTS 7 + #define KEYBD_MATRIX_NUMBER_OUTPUTS 14 + +-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE +-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE ++#undef KEYBD_MATRIX_INVERT_OUTPUT_LOGIC ++#undef KEYBD_MATRIX_INVERT_INPUT_LOGIC + +-#define KEYBD_MATRIX_SETTLING_TIME_US 100 ++#define KEYBD_MATRIX_SETTLING_TIME_US 40 + #define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2 + + #define KEYBD_MATRIX_SET_OUTPUTS(outputs) \ + {\ +- IDP_CPLD_KB_COL_LOW = outputs;\ ++ IDP_CPLD_KB_COL_LOW = outputs & 0x7f;\ + IDP_CPLD_KB_COL_HIGH = outputs >> 7;\ + } + diff --git a/packages/linux/devkitidp-pxa255-kernel_2.6.11.bb b/packages/linux/devkitidp-pxa255_2.6.19.bb index a79c90220c..500c0535d2 100644 --- a/packages/linux/devkitidp-pxa255-kernel_2.6.11.bb +++ b/packages/linux/devkitidp-pxa255_2.6.19.bb @@ -1,16 +1,15 @@ SECTION = "kernel" DESCRIPTION = "Linux kernel for the BSQUARE PXA255 DevKitIDP" LICENSE = "GPL" -PR = "r2" +PR = "r4" +DEPENDS = "u-boot" -SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.11.tar.bz2 \ - ftp://ftp.accelent.com/pxa255_idp/linux/kernel-2.6.11-rc4_idp.patch;patch=1 \ - ftp://ftp.accelent.com/pxa255_idp/linux/kernel-2.6.11_idp_leds.patch;patch=1 \ - ftp://ftp.accelent.com/pxa255_idp/linux/devkitidp-pxa255_defconfig" +SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.19.tar.bz2 \ + file://linux-2.6.19_devkitidp1.patch;patch=1 \ + file://defconfig" -S = "${WORKDIR}/linux-2.6.11" +S = "${WORKDIR}/linux-2.6.19" -COMPATIBLE_HOST = 'arm.*-linux' COMPATIBLE_MACHINE = "devkitidp-pxa255" inherit kernel @@ -26,13 +25,13 @@ KERNEL_IMAGETYPE = "uImage" CMDLINE = "root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mtdparts=phys_mapped_flash:256k(boot)ro,0x1C0000(kernel),-(root)" do_configure_prepend() { - install -m 0644 ${WORKDIR}/${MACHINE}_defconfig ${S}/.config + install -m 0644 ${WORKDIR}/defconfig ${S}/.config # echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config } do_deploy() { - install -d ${DEPLOY_DIR_IMAGE} - install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}-${DATETIME}.bin + install -d ${DEPLOY_DIR}/images + install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${MACHINE}-${DATETIME}.bin } do_deploy[dirs] = "${S}" diff --git a/packages/linux/ixp4xx-kernel.inc b/packages/linux/ixp4xx-kernel.inc index 2e49e912f5..a45a690955 100644 --- a/packages/linux/ixp4xx-kernel.inc +++ b/packages/linux/ixp4xx-kernel.inc @@ -177,9 +177,6 @@ EXTRA_OEMAKE += "EXTRAVERSION=" EXTRA_OEMAKE += "LOCALVERSION=" EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'" -# Override KERNEL_RELEASE from kernel.bbclass to match: -KERNEL_RELEASE = "${KERNEL_VERSION}" - # Set the correct CONFIG_CPU_xxx_ENDIAN and CONFIG_CMDLINE at the head # of the .config file and remove any settings in defconfig then append # defconfig to .config @@ -238,7 +235,7 @@ do_configure_prepend() { # The generic package only includes the generic image, the other # packages are made below (they are kernel-image packages but # with a different ARCH). -FILES_kernel-image = "/boot/${KERNEL_IMAGETYPE}-${IXP4XX_SUFFIX}-${KERNEL_RELEASE}" +FILES_kernel-image = "/boot/${KERNEL_IMAGETYPE}-${IXP4XX_SUFFIX}-${KERNEL_VERSION}" # MACHINE DEFINITIONS: one block for each machine @@ -248,12 +245,12 @@ PACKAGES += "kernel-image-nslu2" PKG_kernel-image-nslu2 = "kernel-image-${KERNEL_VERSION}" PACKAGE_ARCH_kernel-image-nslu2 = "nslu2${ARCH_BYTE_SEX}" DESCRIPTION_kernel-image-nslu2 = "Linux kernel for the LinkSys NSLU2" -FILES_kernel-image-nslu2 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_RELEASE}" +FILES_kernel-image-nslu2 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_VERSION}" pkg_postinst_kernel-image-nslu2 () { - update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_RELEASE} ${KERNEL_PRIORITY} || true + update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true } pkg_postrm_kernel-image-nslu2 () { - update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_RELEASE} || true + update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true } # The correct settings for Loft: @@ -262,12 +259,12 @@ PACKAGES += "kernel-image-loft" PKG_kernel-image-loft = "kernel-image-${KERNEL_VERSION}" PACKAGE_ARCH_kernel-image-loft = "loft${ARCH_BYTE_SEX}" DESCRIPTION_kernel-image-loft = "Linux kernel for the Giant Shoulder Inc. Loft board" -FILES_kernel-image-loft = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_RELEASE}" +FILES_kernel-image-loft = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_VERSION}" pkg_postinst_kernel-image-loft () { - update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_RELEASE} ${KERNEL_PRIORITY} || true + update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true } pkg_postrm_kernel-image-loft () { - update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_RELEASE} || true + update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true } # The correct settings for the NAS100D board: @@ -276,12 +273,12 @@ PACKAGES += "kernel-image-nas100d" PKG_kernel-image-nas100d = "kernel-image-${KERNEL_VERSION}" PACKAGE_ARCH_kernel-image-nas100d = "nas100d${ARCH_BYTE_SEX}" DESCRIPTION_kernel-image-nas100d = "Linux kernel for the IOMega NAS100D" -FILES_kernel-image-nas100d = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_RELEASE}" +FILES_kernel-image-nas100d = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_VERSION}" pkg_postinst_kernel-image-nas100d () { - update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_RELEASE} ${KERNEL_PRIORITY} || true + update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true } pkg_postrm_kernel-image-nas100d () { - update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_RELEASE} || true + update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true } # The correct settings for the DSMG600 board: @@ -290,12 +287,12 @@ PACKAGES += "kernel-image-dsmg600" PKG_kernel-image-dsmg600 = "kernel-image-${KERNEL_VERSION}" PACKAGE_ARCH_kernel-image-dsmg600 = "dsmg600${ARCH_BYTE_SEX}" DESCRIPTION_kernel-image-dsmg600 = "Linux kernel for the D-Link DSM-G600" -FILES_kernel-image-dsmg600 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_RELEASE}" +FILES_kernel-image-dsmg600 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_VERSION}" pkg_postinst_kernel-image-dsmg600 () { - update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_RELEASE} ${KERNEL_PRIORITY} || true + update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true } pkg_postrm_kernel-image-dsmg600 () { - update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_RELEASE} || true + update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true } # The correct settings for the FSG-3 board: @@ -304,12 +301,12 @@ PACKAGES += "kernel-image-fsg3" PKG_kernel-image-fsg3 = "kernel-image-${KERNEL_VERSION}" PACKAGE_ARCH_kernel-image-fsg3 = "fsg3${ARCH_BYTE_SEX}" DESCRIPTION_kernel-image-fsg3 = "Linux kernel for the Freecom FSG-3" -FILES_kernel-image-fsg3 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_RELEASE}" +FILES_kernel-image-fsg3 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_VERSION}" pkg_postinst_kernel-image-fsg3 () { - update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_RELEASE} ${KERNEL_PRIORITY} || true + update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true } pkg_postrm_kernel-image-fsg3 () { - update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_RELEASE} || true + update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true } #FIXUP: the correct instructions to copy the kernel prepended with the le fixup @@ -346,13 +343,13 @@ copy_image() { } install_image() { - copy_image '${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-'"$1"'-${KERNEL_RELEASE}' "$2" + copy_image '${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-'"$1"'-${KERNEL_VERSION}' "$2" } do_install_append() { # Overwrite the unshimmed generic image with a shimmed one (but without # any command line or machine id override). - rm -f '${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_RELEASE}' + rm -f '${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_VERISON}' install_image '${IXP4XX_SUFFIX}' # Add the machine specific images, with appropriate suffixes diff --git a/packages/linux/linux-ezx_2.6.16.13.bb b/packages/linux/linux-ezx_2.6.16.13.bb index 0f4863e125..5d13af9f83 100644 --- a/packages/linux/linux-ezx_2.6.16.13.bb +++ b/packages/linux/linux-ezx_2.6.16.13.bb @@ -103,7 +103,7 @@ do_compile_append() { do_deploy() { install -d ${DEPLOY_DIR_IMAGE} install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin - tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${MACHINE}.tgz -C ${D} lib + tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_VERSION}-${MACHINE}.tgz -C ${D} lib } do_deploy[dirs] = "${S}" diff --git a/packages/linux/linux-handhelds-2.6.inc b/packages/linux/linux-handhelds-2.6.inc index 7a15cbe315..35dd7fbb58 100644 --- a/packages/linux/linux-handhelds-2.6.inc +++ b/packages/linux/linux-handhelds-2.6.inc @@ -61,6 +61,11 @@ do_configure() { do_deploy() { install -d ${DEPLOY_DIR_IMAGE} install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME} + + #reflash.ctl is required to reflash using bootldr + # format: + # name file md5sumfile destination + echo "${MACHINE}-kernel-${DATETIME} ${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME} - kernel" >> ${DEPLOY_DIR_IMAGE}/reflash.ctl } do_deploy[dirs] = "${S}" diff --git a/packages/linux/linux-jlime-jornada7xx_2.6.19rc6.bb b/packages/linux/linux-jlime-jornada7xx_2.6.19rc6.bb index 7fc274351a..10b3d2edac 100644 --- a/packages/linux/linux-jlime-jornada7xx_2.6.19rc6.bb +++ b/packages/linux/linux-jlime-jornada7xx_2.6.19rc6.bb @@ -20,7 +20,6 @@ KERNEL_CCSUFFIX = "-3.4.4" ARCH = "arm" KERNEL_IMAGETYPE = "zImage" -KERNEL_RELEASE = "2.6.19-rc6" FILES_kernel-image = "/boot/${KERNEL_IMAGETYPE}*" diff --git a/packages/linux/linux-omap1.inc b/packages/linux/linux-omap1.inc index 8e64156d4c..8e78ac1a5c 100644 --- a/packages/linux/linux-omap1.inc +++ b/packages/linux/linux-omap1.inc @@ -26,7 +26,7 @@ do_deploy() { install -d ${DEPLOY_DIR_IMAGE} ${OBJCOPY} -O binary -R .note -R .comment -S ${KERNEL_OUTPUT} ${S}/linux.bin gzip -f -9 ${S}/linux.bin - mkimage -A arm -O linux -T kernel -C gzip -a 0x10008000 -e 0x10008000 -n "OE" -d ${S}/linux.bin.gz ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${KERNEL_RELEASE}-${MACHINE}-${DATETIME}.bin + mkimage -A arm -O linux -T kernel -C gzip -a 0x10008000 -e 0x10008000 -n "OE" -d ${S}/linux.bin.gz ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${KERNEL_VERSION}-${MACHINE}-${DATETIME}.bin rm ${S}/linux.bin.gz fi } diff --git a/packages/linux/linux-omap1_2.6.12-rc2.bb b/packages/linux/linux-omap1_2.6.12-rc2.bb index 74d6822ff4..1b9a1b6de0 100644 --- a/packages/linux/linux-omap1_2.6.12-rc2.bb +++ b/packages/linux/linux-omap1_2.6.12-rc2.bb @@ -7,5 +7,3 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/linux-2.6.12-rc2.ta file://defconfig" S = "${WORKDIR}/linux-2.6.12-rc2" - -KERNEL_RELEASE = "2.6.12-rc2-omap1" diff --git a/packages/linux/linux-omap1_2.6.18+git.bb b/packages/linux/linux-omap1_2.6.18+git.bb index b4f368bf66..a097caa113 100644 --- a/packages/linux/linux-omap1_2.6.18+git.bb +++ b/packages/linux/linux-omap1_2.6.18+git.bb @@ -7,5 +7,3 @@ SRC_URI = "git://source.mvista.com/git/linux-omap-2.6.git;protocol=http;tag=c605 file://defconfig" S = "${WORKDIR}/git" - -KERNEL_RELEASE = "2.6.18-omap1" diff --git a/packages/linux/linux-omap1_2.6.18-omap1.bb b/packages/linux/linux-omap1_2.6.18-omap1.bb index bc1510b4a7..7c087e8cba 100644 --- a/packages/linux/linux-omap1_2.6.18-omap1.bb +++ b/packages/linux/linux-omap1_2.6.18-omap1.bb @@ -7,5 +7,3 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.18.tar.bz2 \ file://defconfig.eabi" S = "${WORKDIR}/linux-2.6.18" - -KERNEL_RELEASE = "${PV}" diff --git a/packages/linux/linux-omap1_2.6.19-omap1.bb b/packages/linux/linux-omap1_2.6.19-omap1.bb index cfe0723770..1734149180 100644 --- a/packages/linux/linux-omap1_2.6.19-omap1.bb +++ b/packages/linux/linux-omap1_2.6.19-omap1.bb @@ -8,5 +8,3 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.19.tar.bz2 \ file://defconfig.eabi" S = "${WORKDIR}/linux-2.6.19" - -KERNEL_RELEASE = "${PV}" diff --git a/packages/linux/linux-omap1_2.6.x+git.bb b/packages/linux/linux-omap1_2.6.x+git.bb index dc039b98b2..fbc0ee2ce7 100644 --- a/packages/linux/linux-omap1_2.6.x+git.bb +++ b/packages/linux/linux-omap1_2.6.x+git.bb @@ -8,5 +8,3 @@ SRC_URI = "git://source.mvista.com/git/linux-omap-2.6.git;protocol=http \ file://defconfig" S = "${WORKDIR}/git" - -KERNEL_RELEASE = "2.6.18-omap1" diff --git a/packages/linux/linux-rp.inc b/packages/linux/linux-rp.inc index a9d7fcb07f..63342d5b3f 100644 --- a/packages/linux/linux-rp.inc +++ b/packages/linux/linux-rp.inc @@ -194,7 +194,7 @@ do_deploy() { install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin rm -f ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ln -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin - tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${MACHINE}.tgz -C ${D} lib + tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_VERSION}-${MACHINE}.tgz -C ${D} lib } do_deploy[dirs] = "${S}" diff --git a/packages/linux/linux-rp_2.6.16.bb b/packages/linux/linux-rp_2.6.16.bb index f1de99d452..bd1ce2b210 100644 --- a/packages/linux/linux-rp_2.6.16.bb +++ b/packages/linux/linux-rp_2.6.16.bb @@ -154,6 +154,3 @@ SRC_URI_append_poodle = "\ ${RPSRC}/rp_poodle_hacks-r0.patch;patch=1" S = "${WORKDIR}/linux-2.6.16" - -# to get module dependencies working -KERNEL_RELEASE = "2.6.16" diff --git a/packages/linux/linux-rp_2.6.17.bb b/packages/linux/linux-rp_2.6.17.bb index fceb547e16..e16bc5d342 100644 --- a/packages/linux/linux-rp_2.6.17.bb +++ b/packages/linux/linux-rp_2.6.17.bb @@ -123,6 +123,3 @@ SRC_URI_append_tosa = "\ # ${DOSRC}/tosa-asoc-r1.patch;patch=1 " S = "${WORKDIR}/linux-2.6.17" - -# to get module dependencies working -KERNEL_RELEASE = "2.6.17" diff --git a/packages/linux/linux-rp_2.6.18.bb b/packages/linux/linux-rp_2.6.18.bb index a4d7813f53..7150881cad 100644 --- a/packages/linux/linux-rp_2.6.18.bb +++ b/packages/linux/linux-rp_2.6.18.bb @@ -105,6 +105,3 @@ SRC_URI_append_tosa = "\ # ${DOSRC}/tosa-asoc-r1.patch;patch=1 " S = "${WORKDIR}/linux-2.6.18" - -# to get module dependencies working -KERNEL_RELEASE = "2.6.18" diff --git a/packages/linux/linux-rp_2.6.19+git.bb b/packages/linux/linux-rp_2.6.19+git.bb index c0d742fffd..1c88dcc204 100644 --- a/packages/linux/linux-rp_2.6.19+git.bb +++ b/packages/linux/linux-rp_2.6.19+git.bb @@ -106,6 +106,3 @@ SRC_URI_append_tosa = "\ # ${DOSRC}/tosa-asoc-r1.patch;patch=1 " S = "${WORKDIR}/git" - -# to get module dependencies working -KERNEL_RELEASE = "2.6.19-rc4" diff --git a/packages/linux/linux-rp_2.6.19.bb b/packages/linux/linux-rp_2.6.19.bb index 41212f3c92..4bb25d4ecc 100644 --- a/packages/linux/linux-rp_2.6.19.bb +++ b/packages/linux/linux-rp_2.6.19.bb @@ -105,6 +105,3 @@ SRC_URI_append_tosa = "\ # ${DOSRC}/tosa-asoc-r1.patch;patch=1 " S = "${WORKDIR}/linux-2.6.19" - -# to get module dependencies working -KERNEL_RELEASE = "2.6.19" diff --git a/packages/linux/linux-smdk2440_2.6.19.bb b/packages/linux/linux-smdk2440_2.6.19.bb index 039e412919..6b839bddf8 100644 --- a/packages/linux/linux-smdk2440_2.6.19.bb +++ b/packages/linux/linux-smdk2440_2.6.19.bb @@ -30,7 +30,7 @@ do_deploy() { install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin rm -f ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ln -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin - tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${MACHINE}.tgz -C ${D} lib + tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_VERSION}-${MACHINE}.tgz -C ${D} lib } do_deploy[dirs] = "${S}" diff --git a/packages/linux/linux-titan-sh4_2.6.17.bb b/packages/linux/linux-titan-sh4_2.6.17.bb index 55e55929a5..5069510bfe 100644 --- a/packages/linux/linux-titan-sh4_2.6.17.bb +++ b/packages/linux/linux-titan-sh4_2.6.17.bb @@ -19,9 +19,6 @@ ARCH = "sh" KERNEL_IMAGETYPE = "zImage" KERNEL_OUTPUT = "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}" -# Fix up kernel version - sh kernels get -sh added automatically -KERNEL_RELEASE = "${KERNEL_VERSION}" - # # The linux-sh cvs tree is a "drop in source tree" and needs to be copied # over the top of the normal linux source since it only includes modified diff --git a/packages/linux/linux/progear/defconfig b/packages/linux/linux/progear/defconfig index 4b811dbc4b..1dccddab5e 100644 --- a/packages/linux/linux/progear/defconfig +++ b/packages/linux/linux/progear/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Sun Nov 26 20:58:25 2006 +# Linux kernel version: 2.6.19 +# Sat Jan 6 17:55:01 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y @@ -32,19 +32,22 @@ CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,6 +78,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -177,6 +181,7 @@ CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -205,6 +210,7 @@ CONFIG_PHYSICAL_START=0x100000 CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set # CONFIG_SOFTWARE_SUSPEND is not set # @@ -220,32 +226,25 @@ CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=m -# CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_DOCK=m +CONFIG_ACPI_PROCESSOR=m +CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 -# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_DEBUG=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set -# CONFIG_ACPI_SBS is not set +CONFIG_ACPI_SBS=m # # APM (Advanced Power Management) BIOS Support # -CONFIG_APM=m -# CONFIG_APM_IGNORE_USER_SUSPEND is not set -# CONFIG_APM_DO_ENABLE is not set -# CONFIG_APM_CPU_IDLE is not set -# CONFIG_APM_DISPLAY_BLANK is not set -CONFIG_APM_RTC_IS_GMT=y -# CONFIG_APM_ALLOW_INTS is not set -# CONFIG_APM_REAL_MODE_POWER_OFF is not set +# CONFIG_APM is not set # # CPU Frequency scaling @@ -297,6 +296,7 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_MSI is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set @@ -349,6 +349,9 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -367,9 +370,11 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -555,15 +560,88 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_IBM_ASM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_MSI_LAPTOP is not set + +# # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +CONFIG_BLK_DEV_ALI15X3=y +# CONFIG_WDC_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # @@ -585,12 +663,13 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -603,12 +682,13 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set @@ -618,10 +698,11 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -638,6 +719,11 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_PCMCIA_SYM53C500 is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -714,6 +800,7 @@ CONFIG_R8169_NAPI=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -821,6 +908,7 @@ CONFIG_PCMCIA_PCNET=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -845,6 +933,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -855,6 +944,9 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ELO is not set CONFIG_TOUCHSCREEN_MTOUCH=m # CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_WISTRON_BTNS is not set @@ -1019,6 +1111,7 @@ CONFIG_I2C_ALI15X3=m # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -1031,6 +1124,7 @@ CONFIG_HWMON=m # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set @@ -1057,6 +1151,7 @@ CONFIG_HWMON=m # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -1068,15 +1163,9 @@ CONFIG_HWMON=m # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# -# CONFIG_IBM_ASM is not set - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -1088,20 +1177,66 @@ CONFIG_VIDEO_V4L2=y # Graphics support # # CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +CONFIG_FB_VESA=y +# CONFIG_FB_VESA_STD is not set +CONFIG_FB_VESA_TNG=y +CONFIG_FB_VESA_DEFAULT_MODE="1024x768@60" +CONFIG_VIDEO_SELECT=y +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_DEVICE=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_DEVICE=y +CONFIG_BACKLIGHT_PROGEAR=y # # Sound @@ -1198,6 +1333,7 @@ CONFIG_SND_ALI5451=m # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set # # USB devices @@ -1262,12 +1398,14 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1304,12 +1442,14 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET_MII=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set CONFIG_USB_NET_CDC_SUBSET=m # CONFIG_USB_ALI_M5632 is not set @@ -1334,6 +1474,7 @@ CONFIG_USB_NET_ZAURUS=m # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -1341,11 +1482,12 @@ CONFIG_USB_NET_ZAURUS=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1392,6 +1534,7 @@ CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # # RTC interfaces @@ -1442,6 +1585,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1458,6 +1602,7 @@ CONFIG_XFS_FS=m # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1496,8 +1641,10 @@ CONFIG_NTFS_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -1598,6 +1745,7 @@ CONFIG_NLS_UTF8=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set @@ -1605,6 +1753,7 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_FS is not set # CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_EARLY_PRINTK=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y @@ -1620,18 +1769,25 @@ CONFIG_DOUBLEFAULT=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_TWOFISH_586 is not set CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_586=m @@ -1642,6 +1798,7 @@ CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZF is not set CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m @@ -1659,6 +1816,7 @@ CONFIG_CRC_CCITT=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y +CONFIG_DYN_PAGEFLAGS=y CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y diff --git a/packages/linux/linux_2.6.19-rc6.bb b/packages/linux/linux_2.6.19-rc6.bb deleted file mode 100644 index 59186ef579..0000000000 --- a/packages/linux/linux_2.6.19-rc6.bb +++ /dev/null @@ -1,26 +0,0 @@ -DESCRIPTION = "Linux Kernel" -SECTION = "kernel" -LICENSE = "GPL" -PV = "2.6.18+2.6.19-rc6" -PR = "r1" - -SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.18.tar.bz2 \ - ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/patch-2.6.19-rc1.bz2;patch=1 \ - ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/incr/patch-2.6.19-rc1-rc2.bz2;patch=1 \ - ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/incr/patch-2.6.19-rc2-rc3.bz2;patch=1 \ - ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/incr/patch-2.6.19-rc3-rc4.bz2;patch=1 \ - ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/incr/patch-2.6.19-rc4-rc5.bz2;patch=1 \ - ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/incr/patch-2.6.19-rc5-rc6.bz2;patch=1 \ - file://defconfig" - -S = "${WORKDIR}/linux-2.6.18" - -inherit kernel - -KERNEL_IMAGETYPE = "bzImage" - -do_configure_prepend() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config -} - -KERNEL_RELEASE = "2.6.19-rc6" diff --git a/packages/linux/linux_2.6.19.bb b/packages/linux/linux_2.6.19.bb new file mode 100644 index 0000000000..8e9346c473 --- /dev/null +++ b/packages/linux/linux_2.6.19.bb @@ -0,0 +1,20 @@ +DESCRIPTION = "Linux Kernel" +SECTION = "kernel" +LICENSE = "GPL" + +SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.19.tar.bz2 \ + file://defconfig" + +SRC_URI_append_progear = " \ + file://progear_bl-r5.patch;patch=1 \ + " + +S = "${WORKDIR}/linux-2.6.19" + +inherit kernel + +KERNEL_IMAGETYPE = "bzImage" + +do_configure_prepend() { + install -m 0644 ${WORKDIR}/defconfig ${S}/.config +} diff --git a/packages/linux/mx21ads-kernel_2.6.19rc6.bb b/packages/linux/mx21ads-kernel_2.6.19rc6.bb index 09dc45f3bd..f218904c43 100644 --- a/packages/linux/mx21ads-kernel_2.6.19rc6.bb +++ b/packages/linux/mx21ads-kernel_2.6.19rc6.bb @@ -22,10 +22,6 @@ ARCH = "arm" KERNEL_IMAGETYPE = "zImage" RPROVIDES_kernel-image += "hostap-modules" -# to get module dependencies working -KERNEL_RELEASE = "2.6.19-rc6" - - #CMDLINE_ROOT = "root=/dev/mtdblock4 rootfstype=jffs2 mem=32M@0x00000000" #CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_CONSOLE}" diff --git a/packages/linux/mx31ads-kernel_2.6.19rc6.bb b/packages/linux/mx31ads-kernel_2.6.19rc6.bb index c6f76fee6f..2081693d68 100644 --- a/packages/linux/mx31ads-kernel_2.6.19rc6.bb +++ b/packages/linux/mx31ads-kernel_2.6.19rc6.bb @@ -22,10 +22,6 @@ ARCH = "arm" KERNEL_IMAGETYPE = "zImage" RPROVIDES_kernel-image += "hostap-modules" -# to get module dependencies working -KERNEL_RELEASE = "2.6.19-rc6" - - #CMDLINE_ROOT = "root=/dev/mtdblock4 rootfstype=jffs2 mem=32M@0x00000000" #CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_CONSOLE}" diff --git a/packages/linux/nslu2-kernel.inc b/packages/linux/nslu2-kernel.inc index e5ed21f0a1..129d5e4403 100644 --- a/packages/linux/nslu2-kernel.inc +++ b/packages/linux/nslu2-kernel.inc @@ -178,9 +178,6 @@ EXTRA_OEMAKE += "EXTRAVERSION=" EXTRA_OEMAKE += "LOCALVERSION=" EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'" -# Override KERNEL_RELEASE from kernel.bbclass to match: -KERNEL_RELEASE = "${KERNEL_VERSION}" - addtask unpacklocal before do_patch after do_unpack # NOTE: in MM kernel builds the config options (oldconfig, menuconfig diff --git a/packages/linux/xanadux-un-2.6_2.6.12.bb b/packages/linux/xanadux-un-2.6_2.6.12.bb index 219a467b69..a82e0abd3e 100644 --- a/packages/linux/xanadux-un-2.6_2.6.12.bb +++ b/packages/linux/xanadux-un-2.6_2.6.12.bb @@ -23,7 +23,7 @@ do_configure() { do_deploy() { install -d ${DEPLOY_DIR_IMAGE} install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin - tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${MACHINE}.tgz -C ${D} lib + tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_VERSION}-${MACHINE}.tgz -C ${D} lib } do_deploy[dirs] = "${S}" |