diff options
Diffstat (limited to 'packages/linux')
14 files changed, 13308 insertions, 95 deletions
diff --git a/packages/linux/linux-omap/0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch b/packages/linux/linux-omap/0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch new file mode 100644 index 0000000000..59c15cee7d --- /dev/null +++ b/packages/linux/linux-omap/0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch @@ -0,0 +1,259 @@ +From 7a7fe8f7530bf5c7f3714acbe9a5ec8cf80c3d0c Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Tue, 4 Nov 2008 15:08:07 +0200 +Subject: [PATCH] DSS: Documentation for OMAP2/3 display subsystem + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + Documentation/arm/OMAP/DSS | 239 ++++++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 239 insertions(+), 0 deletions(-) + create mode 100644 Documentation/arm/OMAP/DSS + +diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS +new file mode 100644 +index 0000000..b0cc980 +--- /dev/null ++++ b/Documentation/arm/OMAP/DSS +@@ -0,0 +1,239 @@ ++OMAP2/3 Display Subsystem ++------------------------- ++ ++This is an almost total rewrite of the OMAP FB driver in drivers/video/omap ++(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI, ++TV-out and multiple display support. ++ ++The DSS2 driver (omap-dss module) is in arch/arm/plat-omap/dss/, and the FB, ++panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live ++currently side by side, you can choose which one to use. ++ ++Features ++-------- ++ ++Working and tested features include: ++ ++- MIPI DPI (parallel) output ++- MIPI DSI output in command mode ++- MIPI DBI (RFBI) output (not tested for a while, might've gotten broken) ++- SDI output ++- TV output ++- All pieces can be compiled as a module or inside kernel ++- Use DISPC to update any of the outputs ++- Use CPU to update RFBI or DSI output ++- OMAP DISPC planes ++- RGB16, RGB24 packed, RGB24 unpacked ++- YUV2, UYVY ++- Scaling ++- Adjusting DSS FCK to find a good pixel clock ++- Use DSI DPLL to create DSS FCK ++ ++omap-dss driver ++------------ ++ ++The DSS driver does not itself have any support for Linux framebuffer, V4L or ++such like the current ones, but it has an internal kernel API that upper level ++drivers can use. ++ ++The DSS driver models OMAP's overlays, overlay managers and displays in a ++flexible way to enable non-common multi-display configuration. In addition to ++modelling the hardware overlays, omap-dss supports virtual overlays and overlay ++managers. These can be used when updating a display with CPU or system DMA. ++ ++Panel and controller drivers ++---------------------------- ++ ++The drivers implement panel or controller specific functionality and are not ++visible to users except through omapfb driver. They register themselves to the ++DSS driver. ++ ++omapfb driver ++------------- ++ ++The omapfb driver implements arbitrary number of standard linux framebuffers. ++These framebuffers can be routed flexibly to any overlays, thus allowing very ++dynamic display architecture. ++ ++The driver exports some omapfb specific ioctls, which are compatible with the ++ioctls in the old driver. ++ ++The rest of the non standard features are exported via sysfs. Whether the final ++implementation will use sysfs, or ioctls, is still open. ++ ++V4L2 drivers ++------------ ++ ++Currently there are no V4L2 display drivers planned, but it is possible to ++implement such either to omapfb driver, or as a separate one. From omap-dss ++point of view the V4L2 drivers should be similar to framebuffer driver. ++ ++Architecture ++-------------------- ++ ++Some clarification what the different components do: ++ ++ - Framebuffer is a memory area inside OMAP's SDRAM that contains the pixel ++ data for the image. Framebuffer has width and height and color depth. ++ - Overlay defines where the pixels are read from and where they go on the ++ screen. The overlay may be smaller than framebuffer, thus displaying only ++ part of the framebuffer. The position of the overlay may be changed if ++ the overlay is smaller than the display. ++ - Overlay manager combines the overlays in to one image and feeds them to ++ display. ++ - Display is the actual physical display device. ++ ++A framebuffer can be connected to multiple overlays to show the same pixel data ++on all of the overlays. Note that in this case the overlay input sizes must be ++the same, but, in case of video overlays, the output size can be different. Any ++framebuffer can be connected to any overlay. ++ ++An overlay can be connected to one overlay manager. Also DISPC overlays can be ++connected only to DISPC overlay managers, and virtual overlays can be only ++connected to virtual overlays. ++ ++An overlay manager can be connected to one display. There are certain ++restrictions which kinds of displays an overlay manager can be connected: ++ ++ - DISPC TV overlay manager can be only connected to TV display. ++ - Virtual overlay managers can only be connected to DBI or DSI displays. ++ - DISPC LCD overlay manager can be connected to all displays, except TV ++ display. ++ ++Sysfs ++----- ++The sysfs interface is a hack, but works for testing. I don't think sysfs ++interface is the best for this in the final version, but I don't quite know ++what would be the best interfaces for these things. ++ ++In /sys/devices/platform/omapfb we have four files: framebuffers, ++overlays, managers and displays. You can read them so see the current ++setup, and change them by writing to it in the form of ++"<item-id> <opt1>:<val1> <opt2>:<val2>..." ++ ++"framebuffers" lists all framebuffers. Its format is: ++ <fb number> ++ t:<target overlay> ++ ++"overlays" lists all overlays. Its format is: ++ <overlay name> ++ t:<target manager> ++ x:<xpos> ++ y:<ypos> ++ iw:<input width, read only> ++ ih:<input height, read only> ++ w:<output width> ++ h:<output height> ++ e:<enabled> ++ ++"managers" lists all overlay managers. Its format is: ++ <manager name> ++ t:<target display> ++ ++"displays" lists all displays. Its format is: ++ <display name> ++ w:<width> ++ h:<height> ++ e:<enabled> ++ u:<update mode> ++ t:<tear sync on/off> ++ ++There is also a debug sysfs file at /sys/devices/platform/omap-dss/clk which ++shows how DSS has configured the clocks. ++ ++Examples ++-------- ++ ++In the example scripts "omapfb" is a symlink to /sys/devices/platform/omapfb/. ++ ++Default setup on OMAP3 SDP ++-------------------------- ++ ++Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI ++and TV-out are not in use. The columns from left to right are: ++framebuffers, overlays, overlay managers, displays. Framebuffers are ++handled by omapfb, and the rest by the DSS. ++ ++FB0 --- GFX -\ DVI ++FB1 --- VID1 --+- LCD ---- LCD ++FB2 --- VID2 -/ TV ----- TV ++ ++Switch from LCD to DVI ++---------------------- ++ ++dviline=`cat omapfb/displays |grep dvi` ++w=`echo $dviline | cut -d " " -f 2 | cut -d ":" -f 2` ++h=`echo $dviline | cut -d " " -f 3 | cut -d ":" -f 2` ++ ++echo "lcd e:0" > omapfb/displays ++echo "lcd t:none" > omapfb/managers ++fbset -fb /dev/fb0 -xres $w -yres $h ++# at this point you have to switch the dvi/lcd dip-switch from the omap board ++echo "lcd t:dvi" > omapfb/managers ++echo "dvi e:1" > omapfb/displays ++ ++After this the configuration looks like: ++ ++FB0 --- GFX -\ -- DVI ++FB1 --- VID1 --+- LCD -/ LCD ++FB2 --- VID2 -/ TV ----- TV ++ ++Clone GFX overlay to LCD and TV ++------------------------------- ++ ++tvline=`cat /sys/devices/platform/omapfb/displays |grep tv` ++w=`echo $tvline | cut -d " " -f 2 | cut -d ":" -f 2` ++h=`echo $tvline | cut -d " " -f 3 | cut -d ":" -f 2` ++ ++echo "1 t:none" > omapfb/framebuffers ++echo "0 t:gfx,vid1" > omapfb/framebuffers ++echo "gfx e:1" > omapfb/overlays ++echo "vid1 t:tv w:$w h:$h e:1" > omapfb/overlays ++echo "tv e:1" > omapfb/displays ++ ++After this the configuration looks like (only relevant parts shown): ++ ++FB0 +-- GFX ---- LCD ---- LCD ++ \- VID1 ---- TV ---- TV ++ ++Misc notes ++---------- ++ ++OMAP FB allocates the framebuffer memory when it starts using ++dma_alloc_writecombine(). This requires large continuous physical memory areas ++and you can pre-reserve that area with "Consistent DMA memory size" Kconfig ++option. ++ ++Using DSI DPLL to generate pixel clock it is possible produce the pixel clock ++of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. ++ ++TODO ++---- ++ ++OMAP2 not tested for some time ++- DSS2 did work on OMAP2, but I haven't been able to test it for some time. ++ ++DSS locking ++ ++Error checking ++- Lots of checks are missing or implemented just as BUG() ++ ++Rotate (external FB) ++Rotate (VRFB) ++Rotate (SMS) ++ ++System DMA update for DSI ++- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how ++ to skip the empty byte?) ++ ++Power management ++- Context saving ++ ++Resolution change ++- The x/y res of the framebuffer are not display resolutions, but the size ++ of the overlay. ++- The display resolution affects all planes on the display. ++ ++OMAP1 support ++- Not sure if needed ++ +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch b/packages/linux/linux-omap/0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch new file mode 100644 index 0000000000..febfc48c4d --- /dev/null +++ b/packages/linux/linux-omap/0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch @@ -0,0 +1,4333 @@ +From 0cd726d12358cfe8d80fc0a309bb0c0732c716f0 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Tue, 4 Nov 2008 16:52:12 +0200 +Subject: [PATCH] DSS: New display subsystem driver for OMAP2/3 + +DSI, RFBI and VENC are separate patches + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + arch/arm/plat-omap/Kconfig | 2 + + arch/arm/plat-omap/Makefile | 2 + + arch/arm/plat-omap/dss/Kconfig | 66 ++ + arch/arm/plat-omap/dss/Makefile | 6 + + arch/arm/plat-omap/dss/dispc.c | 1667 +++++++++++++++++++++++++++++ + arch/arm/plat-omap/dss/display.c | 781 ++++++++++++++ + arch/arm/plat-omap/dss/dpi.c | 303 ++++++ + arch/arm/plat-omap/dss/dss.c | 547 ++++++++++ + arch/arm/plat-omap/dss/dss.h | 240 +++++ + arch/arm/plat-omap/dss/sdi.c | 154 +++ + arch/arm/plat-omap/include/mach/display.h | 458 ++++++++ + 11 files changed, 4226 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/plat-omap/dss/Kconfig + create mode 100644 arch/arm/plat-omap/dss/Makefile + create mode 100644 arch/arm/plat-omap/dss/dispc.c + create mode 100644 arch/arm/plat-omap/dss/display.c + create mode 100644 arch/arm/plat-omap/dss/dpi.c + create mode 100644 arch/arm/plat-omap/dss/dss.c + create mode 100644 arch/arm/plat-omap/dss/dss.h + create mode 100644 arch/arm/plat-omap/dss/sdi.c + create mode 100644 arch/arm/plat-omap/include/mach/display.h + +diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig +index 960c13f..4e90667 100644 +--- a/arch/arm/plat-omap/Kconfig ++++ b/arch/arm/plat-omap/Kconfig +@@ -245,6 +245,8 @@ config OMAP_SERIAL_WAKE + to data on the serial RX line. This allows you to wake the + system from serial console. + ++source "arch/arm/plat-omap/dss/Kconfig" ++ + endmenu + + endif +diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile +index 1259846..2740497 100644 +--- a/arch/arm/plat-omap/Makefile ++++ b/arch/arm/plat-omap/Makefile +@@ -29,3 +29,5 @@ obj-$(CONFIG_OMAP_MMU_FWK) += mmu.o + # OMAP mailbox framework + obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o + ++# OMAP2/3 Display Subsystem ++obj-y += dss/ +diff --git a/arch/arm/plat-omap/dss/Kconfig b/arch/arm/plat-omap/dss/Kconfig +new file mode 100644 +index 0000000..150cd24 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/Kconfig +@@ -0,0 +1,66 @@ ++config OMAP2_DSS ++ tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" ++ depends on ARCH_OMAP2 || ARCH_OMAP3 ++ help ++ OMAP2/3 Display Subsystem support. ++ ++if OMAP2_DSS ++ ++config OMAP2_DSS_DEBUG ++ bool "Debug output" ++ default n ++ ++config OMAP2_DSS_RFBI ++ bool "RFBI support" ++ default y ++ ++config OMAP2_DSS_VENC ++ bool "VENC support" ++ default y ++ ++if ARCH_OMAP3 ++ ++config OMAP2_DSS_SDI ++ bool "SDI support" ++ default y ++ ++config OMAP2_DSS_DSI ++ bool "DSI support" ++ default y ++ ++endif ++ ++config OMAP2_DSS_USE_DSI_PLL ++ bool "Use DSI PLL for PCLK (EXPERIMENTAL)" ++ default n ++ depends on OMAP2_DSS_DSI ++ help ++ Use DSI PLL to generate pixel clock. ++ Currently only for DPI output. ++ ++config OMAP2_DSS_FAKE_VSYNC ++ bool "Fake VSYNC irq from manual update displays" ++ default n ++ help ++ If this is selected, DSI will fake a DISPC VSYNC interrupt ++ when DSI has sent a frame. ++ ++config OMAP2_DSS_MIN_FCK_PER_PCK ++ int "Minimum FCK/PCK ratio (for scaling)" ++ range 1 32 ++ default 4 ++ help ++ This can be used to adjust the minimum FCK/PCK ratio. ++ ++ With this you can make sure that DISPC FCK is at least ++ n x PCK. Video plane scaling requires higher FCK than ++ normally. ++ ++ If this is set to 1, there's no extra constraint on the ++ DISPC FCK. However, the FCK will at minimum be ++ 2xPCK (if active matrix) or 3xPCK (if passive matrix). ++ ++ Max FCK is 173MHz, so this doesn't work if your PCK ++ is very high. ++ ++endif +diff --git a/arch/arm/plat-omap/dss/Makefile b/arch/arm/plat-omap/dss/Makefile +new file mode 100644 +index 0000000..e98c6c1 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/Makefile +@@ -0,0 +1,6 @@ ++obj-$(CONFIG_OMAP2_DSS) += omap-dss.o ++omap-dss-y := dss.o display.o dispc.o dpi.o ++omap-dss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o ++omap-dss-$(CONFIG_OMAP2_DSS_VENC) += venc.o ++omap-dss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o ++omap-dss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o +diff --git a/arch/arm/plat-omap/dss/dispc.c b/arch/arm/plat-omap/dss/dispc.c +new file mode 100644 +index 0000000..8f5da2d +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dispc.c +@@ -0,0 +1,1667 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dispc.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DISPC" ++ ++#include <linux/kernel.h> ++#include <linux/dma-mapping.h> ++#include <linux/vmalloc.h> ++#include <linux/clk.h> ++#include <linux/io.h> ++#include <linux/jiffies.h> ++ ++#include <mach/sram.h> ++#include <mach/board.h> ++#include <mach/clock.h> ++ ++#include <mach/display.h> ++ ++#include "dss.h" ++ ++/* DISPC */ ++#define DISPC_BASE 0x48050400 ++ ++struct dispc_reg { u16 idx; }; ++ ++#define DISPC_REG(idx) ((const struct dispc_reg) { idx }) ++ ++/* DISPC common */ ++#define DISPC_REVISION DISPC_REG(0x0000) ++#define DISPC_SYSCONFIG DISPC_REG(0x0010) ++#define DISPC_SYSSTATUS DISPC_REG(0x0014) ++#define DISPC_IRQSTATUS DISPC_REG(0x0018) ++#define DISPC_IRQENABLE DISPC_REG(0x001C) ++#define DISPC_CONTROL DISPC_REG(0x0040) ++#define DISPC_CONFIG DISPC_REG(0x0044) ++#define DISPC_CAPABLE DISPC_REG(0x0048) ++#define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C) ++#define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050) ++#define DISPC_TRANS_COLOR0 DISPC_REG(0x0054) ++#define DISPC_TRANS_COLOR1 DISPC_REG(0x0058) ++#define DISPC_LINE_STATUS DISPC_REG(0x005C) ++#define DISPC_LINE_NUMBER DISPC_REG(0x0060) ++#define DISPC_TIMING_H DISPC_REG(0x0064) ++#define DISPC_TIMING_V DISPC_REG(0x0068) ++#define DISPC_POL_FREQ DISPC_REG(0x006C) ++#define DISPC_DIVISOR DISPC_REG(0x0070) ++#define DISPC_SIZE_DIG DISPC_REG(0x0078) ++#define DISPC_SIZE_LCD DISPC_REG(0x007C) ++ ++#define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4) ++#define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8) ++#define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC) ++ ++/* DISPC GFX plane */ ++#define DISPC_GFX_BA0 DISPC_REG(0x0080) ++#define DISPC_GFX_BA1 DISPC_REG(0x0084) ++#define DISPC_GFX_POSITION DISPC_REG(0x0088) ++#define DISPC_GFX_SIZE DISPC_REG(0x008C) ++#define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0) ++#define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4) ++#define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8) ++#define DISPC_GFX_ROW_INC DISPC_REG(0x00AC) ++#define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0) ++#define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4) ++#define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8) ++ ++/* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */ ++#define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx) ++ ++#define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000) ++#define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004) ++#define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008) ++#define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C) ++#define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010) ++#define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014) ++#define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018) ++#define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C) ++#define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020) ++#define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024) ++#define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028) ++#define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C) ++#define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030) ++ ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8) ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8) ++/* coef index i = {0, 1, 2, 3, 4} */ ++#define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4) ++ ++#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_OCP_ERR | \ ++ DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_SYNC_LOST) ++/*DISPC_IRQ_SYNC_LOST_DIGIT*/ ++ ++#define DISPC_MAX_NR_ISRS 8 ++ ++static struct { ++ omap_dispc_isr_t isr; ++ void *arg; ++ u32 mask; ++} registered_isr[DISPC_MAX_NR_ISRS]; ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dispc_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) ++ ++static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, ++ DISPC_VID_ATTRIBUTES(0), ++ DISPC_VID_ATTRIBUTES(1) }; ++ ++static struct { ++ void __iomem *base; ++ ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ struct clk *dss_54m_fck; ++ struct clk *dpll4_m4_ck; ++} dispc; ++ ++static spinlock_t dss_lock; ++ ++static inline void enable_clocks(int enable) ++{ ++ if (enable) { ++ clk_enable(dispc.dss_ick); ++ clk_enable(dispc.dss1_fck); ++ } else { ++ clk_disable(dispc.dss1_fck); ++ clk_disable(dispc.dss_ick); ++ } ++} ++ ++static inline void dispc_write_reg(const struct dispc_reg idx, u32 val) ++{ ++ __raw_writel(val, dispc.base + idx.idx); ++} ++ ++static inline u32 dispc_read_reg(const struct dispc_reg idx) ++{ ++ return __raw_readl(dispc.base + idx.idx); ++} ++ ++void dispc_go(enum omap_channel channel) ++{ ++ int bit; ++ unsigned long tmo; ++ ++ enable_clocks(1); ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 0; /* LCDENABLE */ ++ else ++ bit = 1; /* DIGITALENABLE */ ++ ++ /* if the channel is not enabled, we don't need GO */ ++ if (REG_GET(DISPC_CONTROL, bit, bit) == 0) ++ goto end; ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 5; /* GOLCD */ ++ else ++ bit = 6; /* GODIGIT */ ++ ++ tmo = jiffies + msecs_to_jiffies(200); ++ while (REG_GET(DISPC_CONTROL, bit, bit) == 1) { ++ if (time_after(jiffies, tmo)) { ++ DSSERR("timeout waiting GO flag\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ ++ DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT"); ++ ++ REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); ++end: ++ enable_clocks(0); ++} ++ ++static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value); ++} ++ ++static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value); ++} ++ ++ ++static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup, ++ int vscaleup) ++{ ++ /* Coefficients for horizontal up-sampling */ ++ const u32 coef_hup[8] = { ++ 0x00800000, ++ 0x0D7CF800, ++ 0x1E70F5FF, ++ 0x335FF5FE, ++ 0xF74949F7, ++ 0xF55F33FB, ++ 0xF5701EFE, ++ 0xF87C0DFF, ++ }; ++ ++ /* Coefficients for horizontal down-sampling */ ++ const u32 coef_hdown[8] = { ++ 0x24382400, ++ 0x28371FFE, ++ 0x2C361BFB, ++ 0x303516F9, ++ 0x11343311, ++ 0x1635300C, ++ 0x1B362C08, ++ 0x1F372804, ++ }; ++ ++ /* Coefficients for horizontal and vertical up-sampling */ ++ const u32 coef_hvup[8] = { ++ 0x00800000, ++ 0x037B02FF, ++ 0x0C6F05FE, ++ 0x205907FB, ++ 0x00404000, ++ 0x075920FE, ++ 0x056F0CFF, ++ 0x027B0300, ++ }; ++ ++ /* Coefficients for horizontal and vertical down-sampling */ ++ const u32 coef_hvdown[8] = { ++ 0x24382400, ++ 0x28391F04, ++ 0x2D381B08, ++ 0x3237170C, ++ 0x123737F7, ++ 0x173732F9, ++ 0x1B382DFB, ++ 0x1F3928FE, ++ }; ++ ++ const u32 *h_coef; ++ const u32 *hv_coef; ++ const u32 *hv_coef_mod; ++ int i; ++ ++ if (hscaleup) ++ h_coef = coef_hup; ++ else ++ h_coef = coef_hdown; ++ ++ if (vscaleup) { ++ hv_coef = coef_hvup; ++ ++ if (hscaleup) ++ hv_coef_mod = NULL; ++ else ++ hv_coef_mod = coef_hvdown; ++ } else { ++ hv_coef = coef_hvdown; ++ ++ if (hscaleup) ++ hv_coef_mod = coef_hvup; ++ else ++ hv_coef_mod = NULL; ++ } ++ ++ for (i = 0; i < 8; i++) { ++ u32 h, hv; ++ ++ h = h_coef[i]; ++ ++ hv = hv_coef[i]; ++ ++ if (hv_coef_mod) { ++ hv &= 0xffffff00; ++ hv |= (hv_coef_mod[i] & 0xff); ++ } ++ ++ _dispc_write_firh_reg(plane, i, h); ++ _dispc_write_firhv_reg(plane, i, hv); ++ } ++} ++ ++static void _dispc_setup_color_conv_coef(void) ++{ ++ const struct color_conv_coef { ++ int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; ++ int full_range; ++ } ctbl_bt601_5 = { ++ 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, ++ }; ++ ++ const struct color_conv_coef *ct; ++ ++#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) ++ ++ ct = &ctbl_bt601_5; ++ ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb)); ++ ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb)); ++ ++#undef CVAL ++ ++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11); ++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11); ++} ++ ++ ++static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) ++{ ++ const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0, ++ DISPC_VID_BA0(0), ++ DISPC_VID_BA0(1) }; ++ ++ dispc_write_reg(ba0_reg[plane], paddr); ++} ++ ++static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) ++{ ++ const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1, ++ DISPC_VID_BA1(0), ++ DISPC_VID_BA1(1) }; ++ ++ dispc_write_reg(ba1_reg[plane], paddr); ++} ++ ++static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) ++{ ++ const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION, ++ DISPC_VID_POSITION(0), ++ DISPC_VID_POSITION(1) }; ++ ++ u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); ++ dispc_write_reg(pos_reg[plane], val); ++} ++ ++static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) ++{ ++ const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE, ++ DISPC_VID_PICTURE_SIZE(0), ++ DISPC_VID_PICTURE_SIZE(1) }; ++ u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ dispc_write_reg(siz_reg[plane], val); ++} ++ ++static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) ++{ ++ u32 val; ++ const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0), ++ DISPC_VID_SIZE(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ dispc_write_reg(vsi_reg[plane-1], val); ++} ++ ++static void _dispc_set_row_inc(enum omap_plane plane, int inc) ++{ ++ const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, ++ DISPC_VID_ROW_INC(0), ++ DISPC_VID_ROW_INC(1) }; ++ ++ dispc_write_reg(ri_reg[plane], inc); ++} ++ ++static void _dispc_set_color_mode(enum omap_plane plane, ++ enum omap_color_mode color_mode) ++{ ++ u32 m = 0; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_CLUT1: ++ m = 0x0; break; ++ case OMAP_DSS_COLOR_CLUT2: ++ m = 0x1; break; ++ case OMAP_DSS_COLOR_CLUT4: ++ m = 0x2; break; ++ case OMAP_DSS_COLOR_CLUT8: ++ m = 0x3; break; ++ case OMAP_DSS_COLOR_RGB12U: ++ m = 0x4; break; ++ case OMAP_DSS_COLOR_ARGB16: ++ m = 0x5; break; ++ case OMAP_DSS_COLOR_RGB16: ++ m = 0x6; break; ++ case OMAP_DSS_COLOR_RGB24U: ++ m = 0x8; break; ++ case OMAP_DSS_COLOR_RGB24P: ++ m = 0x9; break; ++ case OMAP_DSS_COLOR_YUV2: ++ m = 0xa; break; ++ case OMAP_DSS_COLOR_UYVY: ++ m = 0xb; break; ++ case OMAP_DSS_COLOR_ARGB32: ++ m = 0xc; break; ++ case OMAP_DSS_COLOR_RGBA32: ++ m = 0xd; break; ++ case OMAP_DSS_COLOR_RGBX32: ++ m = 0xe; break; ++ default: ++ BUG(); break; ++ } ++ ++ REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1); ++} ++ ++static void _dispc_set_channel_out(enum omap_plane plane, ++ enum omap_channel channel) ++{ ++ int shift; ++ u32 val; ++ ++ switch (plane) { ++ case OMAP_DSS_GFX: ++ shift = 8; ++ break; ++ case OMAP_DSS_VIDEO1: ++ case OMAP_DSS_VIDEO2: ++ shift = 16; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, channel, shift, shift); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++static void _dispc_set_burst_size(enum omap_plane plane, ++ enum omap_burst_size burst_size) ++{ ++ int shift; ++ u32 val; ++ ++ switch (plane) { ++ case OMAP_DSS_GFX: ++ shift = 6; ++ break; ++ case OMAP_DSS_VIDEO1: ++ case OMAP_DSS_VIDEO2: ++ shift = 14; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, burst_size, shift+1, shift); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++static void _dispc_set_vid_color_conv(enum omap_plane plane, int enable) ++{ ++ u32 val; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, enable, 9, 9); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++void dispc_set_lcd_size(int width, int height) ++{ ++ u32 val; ++ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ enable_clocks(1); ++ dispc_write_reg(DISPC_SIZE_LCD, val); ++ enable_clocks(0); ++} ++ ++void dispc_set_digit_size(int width, int height) ++{ ++ u32 val; ++ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ enable_clocks(1); ++ dispc_write_reg(DISPC_SIZE_DIG, val); ++ enable_clocks(0); ++} ++ ++void dispc_setup_plane_fifo(enum omap_plane plane, int ext_mode) ++{ ++ const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, ++ DISPC_VID_FIFO_THRESHOLD(0), ++ DISPC_VID_FIFO_THRESHOLD(1) }; ++ const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, ++ DISPC_VID_FIFO_SIZE_STATUS(0), ++ DISPC_VID_FIFO_SIZE_STATUS(1) }; ++ int low, high; ++ u32 size; ++ ++ enable_clocks(1); ++ ++ if (cpu_is_omap24xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); ++ else if (cpu_is_omap34xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); ++ else ++ BUG(); ++ ++ if (ext_mode) { ++ low = size * 3 / 4; ++ high = size; ++ } else { ++ low = size / 4; ++ high = size * 3 / 4; ++ } ++ ++ if (cpu_is_omap24xx()) ++ dispc_write_reg(ftrs_reg[plane], ++ FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0)); ++ else ++ dispc_write_reg(ftrs_reg[plane], ++ FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0)); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) ++{ ++ u32 val; ++ const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0), ++ DISPC_VID_FIR(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); ++ dispc_write_reg(fir_reg[plane-1], val); ++} ++ ++static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) ++{ ++ u32 val; ++ const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0), ++ DISPC_VID_ACCU0(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); ++ dispc_write_reg(ac0_reg[plane-1], val); ++} ++ ++static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) ++{ ++ u32 val; ++ const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0), ++ DISPC_VID_ACCU1(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); ++ dispc_write_reg(ac1_reg[plane-1], val); ++} ++ ++ ++static void _dispc_set_scaling(enum omap_plane plane, ++ int orig_width, int orig_height, ++ int out_width, int out_height, ++ int ilace) ++{ ++ int fir_hinc; ++ int fir_vinc; ++ int hscaleup, vscaleup; ++ int fieldmode = 0; ++ int accu0 = 0; ++ int accu1 = 0; ++ u32 l; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ hscaleup = orig_width <= out_width; ++ vscaleup = orig_height <= out_height; ++ ++ _dispc_set_scale_coef(plane, hscaleup, vscaleup); ++ ++ if (!orig_width || orig_width == out_width) ++ fir_hinc = 0; ++ else ++ fir_hinc = 1024 * orig_width / out_width; ++ ++ if (!orig_height || orig_height == out_height) ++ fir_vinc = 0; ++ else ++ fir_vinc = 1024 * orig_height / out_height; ++ ++ _dispc_set_fir(plane, fir_hinc, fir_vinc); ++ ++ l = dispc_read_reg(dispc_reg_att[plane]); ++ l &= ~(0x0f << 5); ++ ++ l |= fir_hinc ? (1 << 5) : 0; ++ l |= fir_vinc ? (1 << 6) : 0; ++ ++ l |= hscaleup ? 0 : (1 << 7); ++ l |= vscaleup ? 0 : (1 << 8); ++ ++ dispc_write_reg(dispc_reg_att[plane], l); ++ ++ if (ilace) { ++ if (fieldmode) { ++ accu0 = fir_vinc / 2; ++ accu1 = 0; ++ } else { ++ accu0 = 0; ++ accu1 = fir_vinc / 2; ++ if (accu1 >= 1024/2) { ++ accu0 = 1024/2; ++ accu1 -= accu0; ++ } ++ } ++ } ++ ++ _dispc_set_vid_accu0(plane, 0, accu0); ++ _dispc_set_vid_accu1(plane, 0, accu1); ++} ++ ++static int _dispc_setup_plane(enum omap_plane plane, ++ enum omap_channel channel_out, ++ u32 paddr, int screen_width, ++ int pos_x, int pos_y, ++ int width, int height, ++ int out_width, int out_height, ++ enum omap_color_mode color_mode, ++ int ilace) ++{ ++ int fieldmode = 0; ++ int bpp; ++ int cconv; ++ int scaling = 0; ++ ++ if (plane == OMAP_DSS_GFX) { ++ if (width != out_width || height != out_height) ++ return -EINVAL; ++ } else { ++ /* video plane */ ++ if (width != out_width || height != out_height) ++ scaling = 1; ++ ++ if (out_width < width/2 || ++ out_width > width*8) ++ return -EINVAL; ++ ++ if (out_height < height/2 || ++ out_height > height*8) ++ return -EINVAL; ++ } ++ ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ bpp = 16; ++ cconv = 0; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ bpp = 24; ++ cconv = 0; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ bpp = 32; ++ cconv = 0; ++ break; ++ ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ BUG_ON(plane == OMAP_DSS_GFX); ++ bpp = 16; ++ cconv = 1; ++ break; ++ ++ default: ++ BUG(); ++ return 1; ++ } ++ ++ if (ilace) { ++ if (height == out_height || height > out_height) ++ fieldmode = 1; ++ } ++ ++ if (fieldmode) ++ height /= 2; ++ ++ if (ilace) ++ out_height /= 2; ++ ++ if (plane != OMAP_DSS_GFX) ++ _dispc_set_scaling(plane, width, height, ++ out_width, out_height, ++ ilace); ++ ++ /* attributes */ ++ _dispc_set_channel_out(plane, channel_out); ++ _dispc_set_color_mode(plane, color_mode); ++ if (plane != OMAP_DSS_GFX) ++ _dispc_set_vid_color_conv(plane, cconv); ++ ++ /* */ ++ ++ _dispc_set_plane_ba0(plane, paddr); ++ ++ if (fieldmode) ++ _dispc_set_plane_ba1(plane, paddr + screen_width * bpp/8); ++ else ++ _dispc_set_plane_ba1(plane, paddr); ++ ++ ++ _dispc_set_plane_pos(plane, pos_x, pos_y); ++ ++ _dispc_set_pic_size(plane, width, height); ++ ++ if (plane != OMAP_DSS_GFX) ++ _dispc_set_vid_size(plane, out_width, out_height); ++ ++ _dispc_set_row_inc(plane, ++ (screen_width - width) * bpp / 8 + ++ (fieldmode ? screen_width * bpp / 8 : 0) + ++ 1); ++ ++ return 0; ++} ++ ++static void _dispc_enable_plane(enum omap_plane plane, int enable) ++{ ++ REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0); ++} ++ ++ ++void dispc_enable_lcd_out(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); ++ enable_clocks(0); ++} ++ ++void dispc_enable_digit_out(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); ++ enable_clocks(0); ++} ++ ++void dispc_lcd_enable_signal_polarity(int act_high) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); ++ enable_clocks(0); ++} ++ ++void dispc_lcd_enable_signal(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); ++ enable_clocks(0); ++} ++ ++void dispc_pck_free_enable(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); ++ enable_clocks(0); ++} ++ ++void dispc_enable_fifohandcheck(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); ++ enable_clocks(0); ++} ++ ++ ++static inline void get_dss_clocks(void) ++{ ++ dispc.dss_ick = get_dss_ick(); ++ dispc.dss1_fck = get_dss1_fck(); ++ dispc.dss_54m_fck = get_tv_fck(); ++} ++ ++void dispc_set_lcd_display_type(enum omap_lcd_display_type type) ++{ ++ int mode; ++ ++ switch (type) { ++ case OMAP_DSS_LCD_DISPLAY_STN: ++ mode = 0; ++ break; ++ ++ case OMAP_DSS_LCD_DISPLAY_TFT: ++ mode = 1; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); ++ enable_clocks(0); ++} ++ ++void dispc_set_loadmode(enum omap_dss_load_mode mode) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); ++ enable_clocks(0); ++} ++ ++ ++void omap_dispc_set_default_color(enum omap_channel channel, u32 color) ++{ ++ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, ++ DISPC_DEFAULT_COLOR1 }; ++ ++ enable_clocks(1); ++ dispc_write_reg(def_reg[channel], color); ++ enable_clocks(0); ++} ++ ++void omap_dispc_set_trans_key(enum omap_channel ch, ++ enum omap_dss_color_key_type type, ++ u32 trans_key) ++{ ++ const struct dispc_reg tr_reg[] = { ++ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; ++ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); ++ ++ dispc_write_reg(tr_reg[ch], trans_key); ++ enable_clocks(0); ++} ++ ++void omap_dispc_enable_trans_key(enum omap_channel ch, int enable) ++{ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); ++ enable_clocks(0); ++} ++ ++void dispc_set_tft_data_lines(int data_lines) ++{ ++ int code; ++ ++ switch (data_lines) { ++ case 12: ++ code = 0; ++ break; ++ case 16: ++ code = 1; ++ break; ++ case 18: ++ code = 2; ++ break; ++ case 24: ++ code = 3; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); ++ enable_clocks(0); ++} ++ ++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode) ++{ ++ u32 l; ++ int stallmode; ++ int gpout0 = 1; ++ int gpout1; ++ ++ switch (mode) { ++ case OMAP_DSS_PARALLELMODE_BYPASS: ++ stallmode = 0; ++ gpout1 = 1; ++ break; ++ ++ case OMAP_DSS_PARALLELMODE_RFBI: ++ stallmode = 1; ++ gpout1 = 0; ++ break; ++ ++ case OMAP_DSS_PARALLELMODE_DSI: ++ stallmode = 1; ++ gpout1 = 1; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ ++ l = dispc_read_reg(DISPC_CONTROL); ++ ++ l = FLD_MOD(l, stallmode, 11, 11); ++ l = FLD_MOD(l, gpout0, 15, 15); ++ l = FLD_MOD(l, gpout1, 16, 16); ++ ++ dispc_write_reg(DISPC_CONTROL, l); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp, ++ int vsw, int vfp, int vbp) ++{ ++ u32 timing_h, timing_v; ++ ++ BUG_ON(hsw < 1 || hsw > 64); ++ BUG_ON(hfp < 1 || hfp > 256); ++ BUG_ON(hbp < 1 || hbp > 256); ++ ++ BUG_ON(vsw < 1 || vsw > 64); ++ BUG_ON(vfp < 0 || vfp > 255); ++ BUG_ON(vbp < 0 || vbp > 255); ++ ++ timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | ++ FLD_VAL(hbp-1, 27, 20); ++ ++ timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | ++ FLD_VAL(vbp, 27, 20); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_TIMING_H, timing_h); ++ dispc_write_reg(DISPC_TIMING_V, timing_v); ++ enable_clocks(0); ++} ++ ++void dispc_set_lcd_timings(struct omap_video_timings *timings) ++{ ++ _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp, ++ timings->vsw, timings->vfp, timings->vbp); ++} ++ ++void dispc_set_lcd_divisor(int lck_div, int pck_div) ++{ ++ BUG_ON(lck_div < 1); ++ BUG_ON(pck_div < 2); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_DIVISOR, ++ FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); ++ enable_clocks(0); ++} ++ ++static void dispc_get_lcd_divisor(int *lck_div, int *pck_div) ++{ ++ u32 l; ++ l = dispc_read_reg(DISPC_DIVISOR); ++ *lck_div = FLD_GET(l, 23, 16); ++ *pck_div = FLD_GET(l, 7, 0); ++} ++ ++unsigned long dispc_fclk_rate(void) ++{ ++ unsigned long r = 0; ++ ++ if (dss_get_dispc_clk_source() == 0) ++ r = clk_get_rate(dispc.dss1_fck); ++ else ++#ifdef CONFIG_OMAP2_DSS_DSI ++ r = dsi_get_dsi1_pll_rate(); ++#else ++ BUG(); ++#endif ++ return r; ++} ++ ++unsigned long dispc_pclk_rate(void) ++{ ++ int lcd, pcd; ++ unsigned long r; ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_DIVISOR); ++ ++ lcd = FLD_GET(l, 23, 16); ++ pcd = FLD_GET(l, 7, 0); ++ ++ r = dispc_fclk_rate(); ++ ++ return r / lcd / pcd; ++} ++ ++ssize_t dispc_print_clocks(char *buf, ssize_t size) ++{ ++ ssize_t l = 0; ++ int lcd, pcd; ++ ++ enable_clocks(1); ++ ++ dispc_get_lcd_divisor(&lcd, &pcd); ++ ++ l += snprintf(buf + l, size - l, "- dispc -\n"); ++ ++ l += snprintf(buf + l, size - l, "dispc fclk source = %s\n", ++ dss_get_dispc_clk_source() == 0 ? ++ "dss1_alwon_fclk" : "dsi1_pll_fclk"); ++ ++ l += snprintf(buf + l, size - l, ++ "pixel clk = %lu / %d / %d = %lu\n", ++ dispc_fclk_rate(), ++ lcd, pcd, ++ dispc_pclk_rate()); ++ ++ enable_clocks(0); ++ ++ return l; ++} ++ ++static void _dispc_set_pol_freq(int onoff, int rf, int ieo, int ipc, ++ int ihs, int ivs, int acbi, int acb) ++{ ++ u32 l = 0; ++ ++ DSSDBG("polfreq ihs %d, ivs %d, acb %d\n", ihs, ivs, acb); ++ ++ l |= FLD_VAL(onoff, 17, 17); ++ l |= FLD_VAL(rf, 16, 16); ++ l |= FLD_VAL(ieo, 15, 15); ++ l |= FLD_VAL(ipc, 14, 14); ++ l |= FLD_VAL(ihs, 13, 13); ++ l |= FLD_VAL(ivs, 12, 12); ++ l |= FLD_VAL(acbi, 11, 8); ++ l |= FLD_VAL(acb, 7, 0); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_POL_FREQ, l); ++ enable_clocks(0); ++} ++ ++void dispc_set_pol_freq(struct omap_panel *panel) ++{ ++ _dispc_set_pol_freq((panel->config & OMAP_DSS_LCD_ONOFF) != 0, ++ (panel->config & OMAP_DSS_LCD_RF) != 0, ++ (panel->config & OMAP_DSS_LCD_IEO) != 0, ++ (panel->config & OMAP_DSS_LCD_IPC) != 0, ++ (panel->config & OMAP_DSS_LCD_IHS) != 0, ++ (panel->config & OMAP_DSS_LCD_IVS) != 0, ++ panel->acbi, panel->acb); ++} ++ ++unsigned long dispc_calc_clock_div(int is_tft, int pck, int *fck_div, ++ int *lck_div, int *pck_div) ++{ ++ unsigned long prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ unsigned long pcd_min = is_tft ? 2 : 3; ++ unsigned long best_pck = 0; ++ int best_fd = 9, best_ld = 1, best_pd = 2; ++ int fd, ld, pd; ++ ++ for (fd = 16; fd > 0; --fd) { ++ unsigned long fck = prate / fd * 2; ++ ++ if (fck > DISPC_MAX_FCK) ++ continue; ++ ++#ifdef CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK ++ if (fck < pck * CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK) ++ continue; ++#endif ++ for (ld = 1; ld <= 255; ++ld) { ++ unsigned long lck = fck / ld; ++ ++ for (pd = pcd_min; pd <= 255; ++pd) { ++ int p = lck / pd; ++ ++ if (abs(p - pck) < abs(best_pck - pck)) { ++ best_pck = p; ++ best_fd = fd; ++ best_ld = ld; ++ best_pd = pd; ++ } ++ ++ if (p == pck) ++ goto found; ++ ++ if (p < pck) ++ break; ++ } ++ ++ if (lck / pcd_min < pck) ++ break; ++ } ++ } ++ ++found: ++ *fck_div = best_fd; ++ *lck_div = best_ld; ++ *pck_div = best_pd; ++ ++ return prate / best_fd * 2; ++} ++ ++void dispc_set_clock_div(int fck_div, int lck_div, int pck_div) ++{ ++ unsigned long prate; ++ ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ ++ clk_set_rate(dispc.dpll4_m4_ck, prate / fck_div); ++ dispc_set_lcd_divisor(lck_div, pck_div); ++ ++#ifdef DEBUG ++ { ++ unsigned long fck, lck, pck; ++ fck = prate / fck_div * 2; ++ lck = fck / lck_div; ++ pck = lck / pck_div; ++ ++ DSSDBG("dpll4_m4 = %ld\n", prate); ++ DSSDBG("fck = %ld (%d)\n", fck, fck_div); ++ DSSDBG("lck = %ld (%d)\n", lck, lck_div); ++ DSSDBG("pck = %ld (%d)\n", pck, pck_div); ++ } ++#endif ++} ++ ++int dispc_pixel_clock_valid(int pixel_clock) ++{ ++ int fck_div, lck_div, pck_div; ++ unsigned long fck; ++ ++ fck = dispc_calc_clock_div(1, pixel_clock * 1000, ++ &fck_div, &lck_div, &pck_div); ++ ++ return fck > 0; ++} ++ ++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) ++{ ++ int i; ++ int ret = -EBUSY; ++ unsigned long flags; ++ u32 new_mask = 0; ++ ++ if (isr == NULL) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&dss_lock, flags); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ if (registered_isr[i].isr == isr) { ++ ret = -EINVAL; ++ break; ++ } ++ ++ if (registered_isr[i].isr != NULL) ++ continue; ++ ++ registered_isr[i].isr = isr; ++ registered_isr[i].arg = arg; ++ registered_isr[i].mask = mask; ++ ++ enable_clocks(1); ++ new_mask = dispc_read_reg(DISPC_IRQENABLE); ++ new_mask |= mask; ++ dispc_write_reg(DISPC_IRQENABLE, new_mask); ++ enable_clocks(0); ++ ++ ret = 0; ++ break; ++ } ++ ++ spin_unlock_irqrestore(&dss_lock, flags); ++ ++ return ret; ++} ++EXPORT_SYMBOL(omap_dispc_register_isr); ++ ++int omap_dispc_unregister_isr(omap_dispc_isr_t isr) ++{ ++ int i, j; ++ unsigned long flags; ++ u32 new_mask = DISPC_IRQ_MASK_ERROR; ++ int ret = -EINVAL; ++ ++ spin_lock_irqsave(&dss_lock, flags); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ if (registered_isr[i].isr != isr) ++ continue; ++ ++ registered_isr[i].isr = NULL; ++ registered_isr[i].arg = NULL; ++ registered_isr[i].mask = 0; ++ ++ for (j = 0; j < DISPC_MAX_NR_ISRS; j++) ++ new_mask |= registered_isr[j].mask; ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_IRQENABLE, new_mask); ++ enable_clocks(0); ++ ++ ret = 0; ++ break; ++ } ++ ++ spin_unlock_irqrestore(&dss_lock, flags); ++ ++ return ret; ++} ++EXPORT_SYMBOL(omap_dispc_unregister_isr); ++ ++#ifdef DEBUG ++static void print_irq_status(u32 status) ++{ ++ if ((status & DISPC_IRQ_MASK_ERROR) == 0) ++ return; ++ ++ printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DISPC_IRQ_##x) \ ++ printk(#x " "); ++ PIS(GFX_FIFO_UNDERFLOW); ++ PIS(OCP_ERR); ++ PIS(VID1_FIFO_UNDERFLOW); ++ PIS(VID2_FIFO_UNDERFLOW); ++ PIS(SYNC_LOST); ++ PIS(SYNC_LOST_DIGIT); ++#undef PIS ++ ++ printk("\n"); ++} ++#endif ++ ++/* called from dss */ ++void dispc_irq_handler(void) ++{ ++ int i; ++ u32 irqstatus = dispc_read_reg(DISPC_IRQSTATUS); ++ static int errors; ++ ++ if (irqstatus & DISPC_IRQ_MASK_ERROR) { ++ if (printk_ratelimit()) { ++ DSSERR("dispc irq error status %04x\n", ++ irqstatus); ++ } ++ if (errors++ > 100) { ++ DSSERR("Excessive DISPC errors\n" ++ "Turning off lcd and digit\n"); ++ dispc_enable_lcd_out(0); ++ dispc_enable_digit_out(0); ++ } ++ } ++#ifdef DEBUG ++ print_irq_status(irqstatus); ++#endif ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ if (!registered_isr[i].isr) ++ continue; ++ if (registered_isr[i].mask & irqstatus) ++ registered_isr[i].isr(registered_isr[i].arg, ++ irqstatus); ++ } ++ ++ /* ack the interrupt */ ++ dispc_write_reg(DISPC_IRQSTATUS, irqstatus); ++} ++ ++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC ++void dispc_fake_vsync_irq(void) ++{ ++ u32 irqstatus = DISPC_IRQ_VSYNC; ++ int i; ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ if (!registered_isr[i].isr) ++ continue; ++ if (registered_isr[i].mask & irqstatus) ++ registered_isr[i].isr(registered_isr[i].arg, ++ irqstatus); ++ } ++} ++#endif ++ ++static void _omap_dispc_initialize_irq(void) ++{ ++ memset(registered_isr, 0, sizeof(registered_isr)); ++ ++ /* We'll handle these always */ ++ dispc_write_reg(DISPC_IRQENABLE, DISPC_IRQ_MASK_ERROR); ++} ++ ++static void _omap_dispc_initial_config(void) ++{ ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_SYSCONFIG); ++ l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */ ++ l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */ ++ l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */ ++ l = FLD_MOD(l, 1, 1, 1); /* AUTOIDLE */ ++ dispc_write_reg(DISPC_SYSCONFIG, l); ++ ++ /* FUNCGATED */ ++ REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); ++ ++ /* L3 firewall setting: enable access to OCM RAM */ ++ __raw_writel(0x402000b0, IO_ADDRESS(0x680050a0)); ++ ++ _dispc_set_burst_size(OMAP_DSS_GFX, OMAP_DSS_BURST_16x32); ++ _dispc_set_burst_size(OMAP_DSS_VIDEO1, OMAP_DSS_BURST_16x32); ++ _dispc_set_burst_size(OMAP_DSS_VIDEO2, OMAP_DSS_BURST_16x32); ++ ++ _dispc_setup_color_conv_coef(); ++ ++ dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); ++ ++ /* Set logic clock to fck, pixel clock to fck/2 for now */ ++ dispc_set_lcd_divisor(1, 2); ++} ++ ++int dispc_init(void) ++{ ++ u32 rev; ++ ++ spin_lock_init(&dss_lock); ++ ++ dispc.base = ioremap(DISPC_BASE, SZ_1K); ++ if (!dispc.base) { ++ DSSERR("can't ioremap DISPC\n"); ++ return -ENOMEM; ++ } ++ ++ get_dss_clocks(); ++ dispc.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck"); ++ if (IS_ERR(dispc.dpll4_m4_ck)) ++ DSSERR("Failed to get dpll4_m4_ck\n"); ++ ++ enable_clocks(1); ++ ++ _omap_dispc_initial_config(); ++ ++ _omap_dispc_initialize_irq(); ++ ++ rev = dispc_read_reg(DISPC_REVISION); ++ printk(KERN_INFO "OMAP DISPC rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++void dispc_exit(void) ++{ ++ clk_put(dispc.dpll4_m4_ck); ++ iounmap(dispc.base); ++} ++ ++int dispc_enable_plane(enum omap_plane plane, int enable) ++{ ++ DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); ++ ++ enable_clocks(1); ++ _dispc_enable_plane(plane, enable); ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, ++ u32 paddr, int screen_width, ++ int pos_x, int pos_y, ++ int width, int height, ++ int out_width, int out_height, ++ enum omap_color_mode color_mode, ++ int ilace) ++{ ++ int r = 0; ++ ++ DSSDBG("dispc_setup_plane %d, %x, sw %d, %d,%d, %dx%d -> " ++ "%dx%d, (ilace %d)\n", ++ plane, paddr, screen_width, pos_x, pos_y, ++ width, height, ++ out_width, out_height, ++ ilace); ++ ++ enable_clocks(1); ++ ++ r = _dispc_setup_plane(plane, channel_out, ++ paddr, screen_width, ++ pos_x, pos_y, ++ width, height, ++ out_width, out_height, ++ color_mode, ilace); ++ ++ enable_clocks(0); ++ ++ return r; ++} ++ ++static int dispc_is_intersecting(int x1, int y1, int w1, int h1, ++ int x2, int y2, int w2, int h2) ++{ ++ if (x1 >= (x2+w2)) ++ return 0; ++ ++ if ((x1+w1) <= x2) ++ return 0; ++ ++ if (y1 >= (y2+h2)) ++ return 0; ++ ++ if ((y1+h1) <= y2) ++ return 0; ++ ++ return 1; ++} ++ ++static int dispc_is_overlay_scaled(struct omap_overlay_info *pi) ++{ ++ if (pi->width != pi->out_width) ++ return 1; ++ ++ if (pi->height != pi->out_height) ++ return 1; ++ ++ return 0; ++} ++ ++/* returns the area that needs updating */ ++void dispc_setup_partial_planes(struct omap_display *display, ++ int *xi, int *yi, int *wi, int *hi) ++{ ++ struct omap_overlay_manager *mgr; ++ int i; ++ ++ int x, y, w, h; ++ ++ x = *xi; ++ y = *yi; ++ w = *wi; ++ h = *hi; ++ ++ DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n", ++ *xi, *yi, *wi, *hi); ++ ++ ++ mgr = display->manager; ++ ++ if (!mgr) { ++ DSSDBG("no manager\n"); ++ return; ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl; ++ struct omap_overlay_info *pi; ++ ovl = &mgr->overlays[i]; ++ ++ if (ovl->manager != mgr) ++ continue; ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) ++ continue; ++ ++ pi = &ovl->info; ++ ++ if (!pi->enabled) ++ continue; ++ /* ++ * If the plane is intersecting and scaled, we ++ * enlarge the update region to accomodate the ++ * whole area ++ */ ++ ++ if (dispc_is_intersecting(x, y, w, h, ++ pi->pos_x, pi->pos_y, ++ pi->out_width, pi->out_height)) { ++ if (dispc_is_overlay_scaled(pi)) { ++ ++ int x1, y1, x2, y2; ++ ++ if (x > pi->pos_x) ++ x1 = pi->pos_x; ++ else ++ x1 = x; ++ ++ if (y > pi->pos_y) ++ y1 = pi->pos_y; ++ else ++ y1 = y; ++ ++ if ((x + w) < (pi->pos_x + pi->out_width)) ++ x2 = pi->pos_x + pi->out_width; ++ else ++ x2 = x + w; ++ ++ if ((y + h) < (pi->pos_y + pi->out_height)) ++ y2 = pi->pos_y + pi->out_height; ++ else ++ y2 = y + h; ++ ++ x = x1; ++ y = y1; ++ w = x2 - x1; ++ h = y2 - y1; ++ ++ DSSDBG("Update area after enlarge due to " ++ "scaling %d, %d %dx%d\n", ++ x, y, w, h); ++ } ++ } ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl = &mgr->overlays[i]; ++ struct omap_overlay_info *pi = &ovl->info; ++ ++ int px = pi->pos_x; ++ int py = pi->pos_y; ++ int pw = pi->width; ++ int ph = pi->height; ++ int pow = pi->out_width; ++ int poh = pi->out_height; ++ u32 pa = pi->paddr; ++ int psw = pi->screen_width; ++ int bpp; ++ ++ if (ovl->manager != mgr) ++ continue; ++ ++ /* ++ * If plane is not enabled or the update region ++ * does not intersect with the plane in question, ++ * we really disable the plane from hardware ++ */ ++ ++ if (!pi->enabled || ++ !dispc_is_intersecting(x, y, w, h, ++ px, py, pow, poh)) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ switch (pi->color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ bpp = 16; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ bpp = 24; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ bpp = 32; ++ break; ++ ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ bpp = 16; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ if (x > pi->pos_x) { ++ px = 0; ++ pw -= (x - pi->pos_x); ++ pa += (x - pi->pos_x) * bpp / 8; ++ } else { ++ px = pi->pos_x - x; ++ } ++ ++ if (y > pi->pos_y) { ++ py = 0; ++ ph -= (y - pi->pos_y); ++ pa += (y - pi->pos_y) * psw * bpp / 8; ++ } else { ++ py = pi->pos_y - y; ++ } ++ ++ if (w < (px+pw)) ++ pw -= (px+pw) - (w); ++ ++ if (h < (py+ph)) ++ ph -= (py+ph) - (h); ++ ++ /* Can't scale the GFX plane */ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 || ++ dispc_is_overlay_scaled(pi) == 0) { ++ pow = pw; ++ poh = ph; ++ } ++ ++ DSSDBG("calc plane %d, %x, sw %d, %d,%d, %dx%d -> %dx%d\n", ++ ovl->id, pa, psw, px, py, pw, ph, pow, poh); ++ ++ dispc_setup_plane(ovl->id, mgr->id, ++ pa, psw, ++ px, py, ++ pw, ph, ++ pow, poh, ++ pi->color_mode, 0); ++ ++ dispc_enable_plane(ovl->id, 1); ++ } ++ ++ *xi = x; ++ *yi = y; ++ *wi = w; ++ *hi = h; ++ ++} ++ +diff --git a/arch/arm/plat-omap/dss/display.c b/arch/arm/plat-omap/dss/display.c +new file mode 100644 +index 0000000..86f7d39 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/display.c +@@ -0,0 +1,781 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/display.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DISPLAY" ++ ++#include <linux/kernel.h> ++#include <linux/io.h> ++#include <linux/device.h> ++#include <linux/err.h> ++#include <linux/delay.h> ++#include <linux/sysfs.h> ++#include <linux/clk.h> ++ ++#include <mach/display.h> ++#include <mach/clock.h> ++#include "dss.h" ++ ++#define DSS_MAX_DISPLAYS 8 ++ ++static int num_displays; ++static struct omap_display displays[DSS_MAX_DISPLAYS]; ++ ++static ssize_t show_clk(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct clk *clocks[5]; ++ int i; ++ ssize_t l, size = PAGE_SIZE; ++ ++ clocks[0] = get_dss_ick(); ++ clocks[1] = get_dss1_fck(); ++ clocks[2] = get_dss2_fck(); ++ clocks[3] = get_tv_fck(); ++ clocks[4] = get_96m_fck(); ++ ++ l = 0; ++ ++ l += snprintf(buf + l, size - l, "- dss -\n"); ++ ++ for (i = 0; i < 5; i++) { ++ l += snprintf(buf + l, size - l, "%-15s\t%lu\t%d\n", ++ clocks[i]->name, ++ clk_get_rate(clocks[i]), ++ clk_get_usecount(clocks[i])); ++ } ++ ++ l += dispc_print_clocks(buf + l, size - l); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ l += dsi_print_clocks(buf + l, size - l); ++#endif ++ return l; ++} ++ ++static DEVICE_ATTR(clk, S_IRUGO, show_clk, NULL); ++ ++int initialize_sysfs(struct device *dev) ++{ ++ int r; ++ ++ r = device_create_file(dev, &dev_attr_clk); ++ if (r) ++ DSSERR("failed to create sysfs clk file\n"); ++ ++ return r; ++} ++ ++void uninitialize_sysfs(struct device *dev) ++{ ++ device_remove_file(dev, &dev_attr_clk); ++} ++ ++void initialize_displays(struct omap_dss_platform_data *pdata) ++{ ++ int i; ++ ++ num_displays = 0; ++ ++ BUG_ON(pdata->num_displays > DSS_MAX_DISPLAYS); ++ ++ for (i = 0; i < pdata->num_displays; ++i) { ++ struct omap_display *display = &displays[i]; ++ ++ /*atomic_set(&display->ref_count, 0);*/ ++ display->ref_count = 0; ++ ++ display->hw_config = *pdata->displays[i]; ++ display->type = pdata->displays[i]->type; ++ display->name = pdata->displays[i]->name; ++ ++ switch (display->type) { ++ ++ case OMAP_DISPLAY_TYPE_DPI: ++ dpi_init_display(display); ++ break; ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ case OMAP_DISPLAY_TYPE_DBI: ++ rfbi_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_VENC ++ case OMAP_DISPLAY_TYPE_VENC: ++ venc_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ case OMAP_DISPLAY_TYPE_SDI: ++ sdi_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ case OMAP_DISPLAY_TYPE_DSI: ++ dsi_init_display(display); ++ break; ++#endif ++ ++ default: ++ DSSERR("Support for display '%s' not compiled in.\n", ++ display->name); ++ continue; ++ } ++ ++ num_displays++; ++ } ++} ++ ++static int check_overlay(struct omap_overlay *ovl, ++ struct omap_display *display) ++{ ++ struct omap_overlay_info *info; ++ int outw, outh; ++ ++ if (!display) ++ return 0; ++ ++ if (!ovl->info.enabled) ++ return 0; ++ ++ info = &ovl->info; ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { ++ outw = info->width; ++ outh = info->height; ++ } else { ++ if (info->out_width == 0) ++ outw = info->width; ++ else ++ outw = info->out_width; ++ ++ if (info->out_height == 0) ++ outh = info->height; ++ else ++ outh = info->out_height; ++ } ++ ++ if (display->x_res < info->pos_x + outw) ++ return -EINVAL; ++ ++ if (display->y_res < info->pos_y + outh) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++ ++static int omap_dss_set_manager(struct omap_overlay *ovl, ++ struct omap_overlay_manager *mgr) ++{ ++ int r; ++ ++ if (ovl->manager) { ++ DSSERR("overlay '%s' already has a manager '%s'\n", ++ ovl->name, ovl->manager->name); ++ } ++ ++ r = check_overlay(ovl, mgr->display); ++ if (r) ++ return r; ++ ++ ovl->manager = mgr; ++ ++ return 0; ++} ++ ++static int omap_dss_unset_manager(struct omap_overlay *ovl) ++{ ++ if (!ovl->manager) { ++ DSSERR("failed to detach overlay: manager not set\n"); ++ return -EINVAL; ++ } ++ ++ ovl->manager = NULL; ++ ++ return 0; ++} ++ ++static int omap_dss_set_display(struct omap_overlay_manager *mgr, ++ struct omap_display *display) ++{ ++ int i; ++ int r; ++ ++ if (display->manager) { ++ DSSERR("display '%s' already has a manager '%s'\n", ++ display->name, display->manager->name); ++ return -EINVAL; ++ } ++ ++ if ((mgr->supported_displays & display->type) == 0) { ++ DSSERR("display '%s' does not support manager '%s'\n", ++ display->name, mgr->name); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl = &mgr->overlays[i]; ++ ++ if (ovl->manager != mgr || !ovl->info.enabled) ++ continue; ++ ++ r = check_overlay(ovl, display); ++ if (r) ++ return r; ++ } ++ ++ display->manager = mgr; ++ mgr->display = display; ++ ++ return 0; ++} ++ ++static int omap_dss_unset_display(struct omap_overlay_manager *mgr) ++{ ++ if (!mgr->display) { ++ DSSERR("failed to unset display, display not set.\n"); ++ return -EINVAL; ++ } ++ ++ mgr->display->manager = NULL; ++ mgr->display = NULL; ++ ++ return 0; ++} ++ ++static int omap_dss_setup_overlay_input(struct omap_overlay *ovl, ++ u32 paddr, void *vaddr, int screen_width, ++ int width, int height, ++ enum omap_color_mode color_mode) ++{ ++ int r; ++ struct omap_overlay_info old_info; ++ ++ if ((ovl->supported_modes & color_mode) == 0) { ++ DSSERR("overlay doesn't support mode %d\n", color_mode); ++ return -EINVAL; ++ } ++ ++ old_info = ovl->info; ++ ++ ovl->info.paddr = paddr; ++ ovl->info.vaddr = vaddr; ++ ovl->info.screen_width = screen_width; ++ ++ ovl->info.width = width; ++ ovl->info.height = height; ++ ovl->info.color_mode = color_mode; ++ ++ if (ovl->manager) { ++ r = check_overlay(ovl, ovl->manager->display); ++ if (r) { ++ ovl->info = old_info; ++ return r; ++ } ++ } ++ ++ return 0; ++} ++ ++static int omap_dss_setup_overlay_output(struct omap_overlay *ovl, ++ int pos_x, int pos_y, ++ int out_width, int out_height) ++{ ++ int r; ++ struct omap_overlay_info old_info; ++ ++ old_info = ovl->info; ++ ++ ovl->info.pos_x = pos_x; ++ ovl->info.pos_y = pos_y; ++ ovl->info.out_width = out_width; ++ ovl->info.out_height = out_height; ++ ++ if (ovl->manager) { ++ r = check_overlay(ovl, ovl->manager->display); ++ if (r) { ++ ovl->info = old_info; ++ return r; ++ } ++ } ++ ++ return 0; ++} ++ ++static int omap_dss_enable_overlay(struct omap_overlay *ovl, int enable) ++{ ++ struct omap_overlay_info old_info; ++ int r; ++ ++ old_info = ovl->info; ++ ++ ovl->info.enabled = enable ? 1 : 0; ++ ++ if (ovl->manager) { ++ r = check_overlay(ovl, ovl->manager->display); ++ if (r) { ++ ovl->info = old_info; ++ return r; ++ } ++ } ++ ++ return 0; ++} ++ ++ ++static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) ++{ ++ int i; ++ int r; ++ ++ DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); ++ ++ if (!mgr->display) { ++ DSSDBG("no display, aborting apply\n"); ++ return 0; ++ } ++ ++ /* on a manual update display update() handles configuring ++ * planes */ ++ if (mgr->display->get_update_mode) { ++ enum omap_dss_update_mode mode; ++ mode = mgr->display->get_update_mode(mgr->display); ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return 0; ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ int ilace = 0; ++ int outw, outh; ++ ++ struct omap_overlay *ovl = &mgr->overlays[i]; ++ ++ if (!ovl->manager) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ if (ovl->manager != mgr) ++ continue; ++ ++ if (!ovl->info.enabled) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ if (mgr->display->type == OMAP_DISPLAY_TYPE_VENC) ++ ilace = 1; ++ ++ if (ovl->info.out_width == 0) ++ outw = ovl->info.width; ++ else ++ outw = ovl->info.out_width; ++ ++ if (ovl->info.out_height == 0) ++ outh = ovl->info.height; ++ else ++ outh = ovl->info.out_height; ++ ++ r = dispc_setup_plane(ovl->id, ovl->manager->id, ++ ovl->info.paddr, ++ ovl->info.screen_width, ++ ovl->info.pos_x, ++ ovl->info.pos_y, ++ ovl->info.width, ++ ovl->info.height, ++ outw, ++ outh, ++ ovl->info.color_mode, ++ ilace); ++ ++ if (r) { ++ DSSERR("dispc_setup_plane failed\n"); ++ return r; ++ } ++ ++ dispc_enable_plane(ovl->id, 1); ++ } ++ ++ /* XXX if autoidle is enabled, we have to wait here a bit. ++ * Otherwise if we issue GOLCD too soon after lcd enable, ++ * we get sync lost. Why? */ ++ mdelay(100); ++ ++ dispc_go(mgr->id); ++ ++ return 0; ++} ++ ++static struct omap_overlay dispc_overlays[] = { ++ { ++ .name = "gfx", ++ .id = OMAP_DSS_GFX, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ .supported_modes = OMAP_DSS_COLOR_GFX_OMAP3, ++ }, ++ { ++ .name = "vid1", ++ .id = OMAP_DSS_VIDEO1, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ .supported_modes = OMAP_DSS_COLOR_VID_OMAP3, ++ .caps = OMAP_DSS_OVL_CAP_SCALE, ++ }, ++ { ++ .name = "vid2", ++ .id = OMAP_DSS_VIDEO2, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ .supported_modes = OMAP_DSS_COLOR_VID_OMAP3, ++ .caps = OMAP_DSS_OVL_CAP_SCALE, ++ }, ++}; ++ ++static struct omap_overlay_manager dispc_overlay_managers[] = ++{ ++ [OMAP_DSS_OVL_MGR_LCD] = { ++ .name = "lcd", ++ .id = OMAP_DSS_CHANNEL_LCD, ++ .num_overlays = 3, ++ .overlays = dispc_overlays, ++ .set_display = &omap_dss_set_display, ++ .unset_display = &omap_dss_unset_display, ++ .apply = &omap_dss_mgr_apply, ++ .caps = OMAP_DSS_OVL_MGR_CAP_DISPC, ++ .supported_displays = ++ OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI | ++ OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI, ++ }, ++ [OMAP_DSS_OVL_MGR_TV] = { ++ .name = "tv", ++ .id = OMAP_DSS_CHANNEL_DIGIT, ++ .num_overlays = 3, ++ .overlays = dispc_overlays, ++ .set_display = &omap_dss_set_display, ++ .unset_display = &omap_dss_unset_display, ++ .apply = &omap_dss_mgr_apply, ++ .caps = OMAP_DSS_OVL_MGR_CAP_DISPC, ++ .supported_displays = OMAP_DISPLAY_TYPE_VENC, ++ }, ++}; ++ ++static int num_overlays = 3; ++ ++static struct omap_overlay *omap_dss_overlays[10] = { ++ &dispc_overlays[0], ++ &dispc_overlays[1], ++ &dispc_overlays[2], ++}; ++ ++static int num_overlay_managers = 2; ++ ++static struct omap_overlay_manager *omap_dss_overlay_managers[10] = { ++ &dispc_overlay_managers[0], ++ &dispc_overlay_managers[1], ++}; ++ ++ ++static void omap_dss_add_overlay(struct omap_overlay *overlay) ++{ ++ int i = num_overlays++; ++ ++ omap_dss_overlays[i] = overlay; ++} ++ ++static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) ++{ ++ int i = num_overlay_managers++; ++ omap_dss_overlay_managers[i] = manager; ++} ++ ++int omap_dss_get_num_overlays(void) ++{ ++ return num_overlays; ++} ++EXPORT_SYMBOL(omap_dss_get_num_overlays); ++ ++struct omap_overlay *omap_dss_get_overlay(int num) ++{ ++ BUG_ON(num >= num_overlays); ++ return omap_dss_overlays[num]; ++} ++EXPORT_SYMBOL(omap_dss_get_overlay); ++ ++int omap_dss_get_num_overlay_managers(void) ++{ ++ return num_overlay_managers; ++} ++EXPORT_SYMBOL(omap_dss_get_num_overlay_managers); ++ ++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num) ++{ ++ BUG_ON(num >= num_overlay_managers); ++ return omap_dss_overlay_managers[num]; ++} ++EXPORT_SYMBOL(omap_dss_get_overlay_manager); ++ ++static int ovl_mgr_apply_l4(struct omap_overlay_manager *mgr) ++{ ++ DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name); ++ ++ return 0; ++} ++ ++void initialize_overlays(void) ++{ ++ int i; ++ struct omap_overlay_manager *lcd_mgr; ++ struct omap_overlay_manager *tv_mgr; ++ struct omap_overlay_manager *def_mgr = NULL; ++ ++ lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD); ++ tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV); ++ ++ /* connect lcd manager to first non-VENC display found */ ++ for (i = 0; i < num_displays; i++) { ++ if (displays[i].type != OMAP_DISPLAY_TYPE_VENC) { ++ struct omap_display *display = &displays[i]; ++ omap_dss_set_display(lcd_mgr, display); ++ ++ def_mgr = lcd_mgr; ++ ++ break; ++ } ++ } ++ ++ /* connect tv manager to first VENC display found */ ++ for (i = 0; i < num_displays; i++) { ++ if (displays[i].type == OMAP_DISPLAY_TYPE_VENC) { ++ struct omap_display *display = &displays[i]; ++ omap_dss_set_display(tv_mgr, display); ++ ++ if (!def_mgr) ++ def_mgr = tv_mgr; ++ ++ break; ++ } ++ } ++ ++ /* connect all dispc overlays to def_mgr */ ++ if (def_mgr) { ++ for (i = 0; i < 3; i++) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ omap_dss_set_manager(ovl, def_mgr); ++ } ++ } ++ ++ /* setup L4 overlay as an example */ ++ { ++ static struct omap_overlay ovl = { ++ .name = "l4-ovl", ++ .supported_modes = OMAP_DSS_COLOR_RGB24U, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ }; ++ ++ static struct omap_overlay_manager mgr = { ++ .name = "l4", ++ .num_overlays = 1, ++ .overlays = &ovl, ++ .set_display = &omap_dss_set_display, ++ .unset_display = &omap_dss_unset_display, ++ .apply = &ovl_mgr_apply_l4, ++ .supported_displays = ++ OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI, ++ }; ++ ++ omap_dss_add_overlay(&ovl); ++ omap_dss_add_overlay_manager(&mgr); ++ omap_dss_set_manager(&ovl, &mgr); ++ } ++ ++} ++ ++ ++int omap_dss_get_num_displays(void) ++{ ++ return num_displays; ++} ++EXPORT_SYMBOL(omap_dss_get_num_displays); ++ ++struct omap_display *omap_dss_get_display(int no) ++{ ++ struct omap_display *display; ++ ++ if (no >= num_displays) ++ return NULL; ++ ++ display = &displays[no]; ++ ++ switch (display->type) { ++ case OMAP_DISPLAY_TYPE_VENC: ++ break; ++ ++ case OMAP_DISPLAY_TYPE_DPI: ++ case OMAP_DISPLAY_TYPE_SDI: ++ if (display->panel == NULL) ++ return NULL; ++ break; ++ ++ case OMAP_DISPLAY_TYPE_DBI: ++ case OMAP_DISPLAY_TYPE_DSI: ++ if (display->panel == NULL || display->ctrl == NULL) ++ return NULL; ++ break; ++ ++ default: ++ return NULL; ++ } ++ ++ if (display->panel) { ++ if (!try_module_get(display->panel->owner)) ++ goto err0; ++ ++ if (display->panel->init) ++ if (display->panel->init(display) != 0) ++ goto err1; ++ } ++ ++ if (display->ctrl) { ++ if (!try_module_get(display->ctrl->owner)) ++ goto err2; ++ ++ if (display->ctrl->init) ++ if (display->ctrl->init(display) != 0) ++ goto err3; ++ } ++ ++ display->ref_count++; ++ /* ++ if (atomic_cmpxchg(&display->ref_count, 0, 1) != 0) ++ return 0; ++*/ ++ if (display->panel) { ++ display->x_res = display->panel->x_res; ++ display->y_res = display->panel->y_res; ++ display->bpp = display->panel->bpp; ++ } ++ ++ return display; ++err3: ++ if (display->ctrl) ++ module_put(display->ctrl->owner); ++err2: ++ if (display->panel && display->panel->init) ++ display->panel->cleanup(display); ++err1: ++ if (display->panel) ++ module_put(display->panel->owner); ++err0: ++ return NULL; ++} ++EXPORT_SYMBOL(omap_dss_get_display); ++ ++void omap_dss_put_display(struct omap_display *display) ++{ ++ if (--display->ref_count > 0) ++ return; ++/* ++ if (atomic_cmpxchg(&display->ref_count, 1, 0) != 1) ++ return; ++*/ ++ if (display->ctrl) { ++ if (display->ctrl->cleanup) ++ display->ctrl->cleanup(display); ++ module_put(display->ctrl->owner); ++ } ++ ++ if (display->panel) { ++ if (display->panel->cleanup) ++ display->panel->cleanup(display); ++ module_put(display->panel->owner); ++ } ++} ++EXPORT_SYMBOL(omap_dss_put_display); ++ ++void omap_dss_register_ctrl(struct omap_ctrl *ctrl) ++{ ++ int i; ++ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->hw_config.ctrl_name && ++ strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) { ++ display->ctrl = ctrl; ++ DSSDBG("ctrl '%s' registered\n", ctrl->name); ++ } ++ } ++} ++EXPORT_SYMBOL(omap_dss_register_ctrl); ++ ++void omap_dss_register_panel(struct omap_panel *panel) ++{ ++ int i; ++ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->hw_config.panel_name && ++ strcmp(display->hw_config.panel_name, panel->name) == 0) { ++ display->panel = panel; ++ DSSDBG("panel '%s' registered\n", panel->name); ++ } ++ } ++} ++EXPORT_SYMBOL(omap_dss_register_panel); ++ ++void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl) ++{ ++ int i; ++ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->hw_config.ctrl_name && ++ strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) ++ display->ctrl = NULL; ++ } ++} ++EXPORT_SYMBOL(omap_dss_unregister_ctrl); ++ ++void omap_dss_unregister_panel(struct omap_panel *panel) ++{ ++ int i; ++ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->hw_config.panel_name && ++ strcmp(display->hw_config.panel_name, panel->name) == 0) ++ display->panel = NULL; ++ } ++} ++EXPORT_SYMBOL(omap_dss_unregister_panel); +diff --git a/arch/arm/plat-omap/dss/dpi.c b/arch/arm/plat-omap/dss/dpi.c +new file mode 100644 +index 0000000..d121b52 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dpi.c +@@ -0,0 +1,303 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dpi.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/errno.h> ++ ++#include <mach/board.h> ++#include <mach/display.h> ++#include "dss.h" ++ ++ ++static struct { ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ int update_enabled; ++} dpi; ++ ++static void dpi_set_mode(struct omap_display *display) ++{ ++ struct omap_panel *panel = display->panel; ++ int lck_div, pck_div; ++ unsigned long fck; ++ unsigned long pck; ++ int is_tft; ++ ++ dispc_set_lcd_size(display->x_res, display->y_res); ++ ++ dispc_set_lcd_timings(&panel->timings); ++ dispc_set_pol_freq(panel); ++ ++ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ { ++ struct dsi_clock_info cinfo; ++ dsi_pll_calc_pck(is_tft, ++ display->panel->timings.pixel_clock*1000, ++ &cinfo); ++ ++ dsi_pll_program(&cinfo); ++ ++ dss_select_clk_source(0, 1); ++ ++ dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div); ++ ++ fck = cinfo.dispc_fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#else ++ { ++ int fck_div; ++ fck = dispc_calc_clock_div(is_tft, ++ panel->timings.pixel_clock*1000, ++ &fck_div, &lck_div, &pck_div); ++ ++ if (fck == 0) { ++ DSSERR("Requested pixel clock is not possible\n"); ++ return; ++ } ++ ++ dispc_set_clock_div(fck_div, lck_div, pck_div); ++ } ++#endif ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ panel->timings.pixel_clock = pck; ++ DSSDBG("fck %lu, lck_div %d, pck_div %d\n", fck, lck_div, pck_div); ++#ifdef DEBUG ++ { ++ struct omap_video_timings *t; ++ int xtot, ytot; ++ unsigned long ht, vt; ++ ++ t = &display->panel->timings; ++ xtot = display->panel->x_res + t->hfp + t->hsw + t->hbp; ++ ytot = display->panel->y_res + t->vfp + t->vsw + t->vbp; ++ ++ ht = (pck * 1000) / xtot; ++ vt = (pck * 1000) / xtot / ytot; ++ ++ DSSDBG("hsync %ldHz, vsync %ldHz\n", ht, vt); ++ ++ } ++#endif ++ DSSDBG("pixel clock changed to %d\n", panel->timings.pixel_clock); ++} ++ ++ ++static int dpi_display_enable(struct omap_display *display) ++{ ++ struct omap_panel *panel = display->panel; ++ int r; ++ int is_tft; ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ return -EINVAL; ++ } ++ ++ r = panel->enable(display); ++ if (r) ++ return r; ++ ++ clk_enable(dpi.dss_ick); ++ clk_enable(dpi.dss1_fck); ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dsi_pll_init(0, 1); ++#endif ++ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); ++ dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT : ++ OMAP_DSS_LCD_DISPLAY_STN); ++ dispc_set_tft_data_lines(display->hw_config.u.dpi.data_lines); ++ ++ dpi_set_mode(display); ++ ++ mdelay(2); ++ ++ dispc_enable_lcd_out(1); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static int dpi_display_resume(struct omap_display *display); ++ ++static void dpi_display_disable(struct omap_display *display) ++{ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) ++ return; ++ ++ if (display->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ dpi_display_resume(display); ++ ++ display->panel->disable(display); ++ dispc_enable_lcd_out(0); ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dss_select_clk_source(0, 0); ++ dsi_pll_uninit(); ++#endif ++ ++ clk_disable(dpi.dss_ick); ++ clk_disable(dpi.dss1_fck); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++} ++ ++static int dpi_display_suspend(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EINVAL; ++ ++ if (display->panel->suspend) ++ display->panel->suspend(display); ++ ++ dispc_enable_lcd_out(0); ++ ++ clk_disable(dpi.dss_ick); ++ clk_disable(dpi.dss1_fck); ++ ++ display->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int dpi_display_resume(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ return -EINVAL; ++ ++ dispc_enable_lcd_out(1); ++ ++ clk_enable(dpi.dss_ick); ++ clk_enable(dpi.dss1_fck); ++ ++ if (display->panel->resume) ++ display->panel->resume(display); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static void dpi_display_set_mode(struct omap_display *display, ++ int x_res, int y_res, int bpp) ++{ ++ if (display->panel && display->panel->set_mode) ++ display->panel->set_mode(display, x_res, y_res, bpp); ++} ++ ++static void dpi_set_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ DSSDBG("dpi_set_timings\n"); ++ display->panel->timings = *timings; ++ dpi_set_mode(display); ++} ++ ++static int dpi_check_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ if (timings->hsw < 1 || timings->hsw > 64 || ++ timings->hfp < 1 || timings->hfp > 256 || ++ timings->hbp < 1 || timings->hbp > 256) { ++ return -EINVAL; ++ } ++ ++ if (timings->vsw < 1 || timings->vsw > 64 || ++ timings->vfp > 256 || timings->vbp > 256) { ++ return -EINVAL; ++ } ++ ++ if (!dispc_pixel_clock_valid(timings->pixel_clock)) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static void dpi_get_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ *timings = display->panel->timings; ++} ++ ++static int dpi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return -EINVAL; ++ ++ if (mode == OMAP_DSS_UPDATE_DISABLED) { ++ dispc_enable_lcd_out(0); ++ dpi.update_enabled = 0; ++ } else { ++ dispc_enable_lcd_out(1); ++ dpi.update_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode dpi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO : ++ OMAP_DSS_UPDATE_DISABLED; ++} ++ ++void dpi_init_display(struct omap_display *display) ++{ ++ DSSDBG("DPI init_display\n"); ++ ++ display->enable = dpi_display_enable; ++ display->disable = dpi_display_disable; ++ display->suspend = dpi_display_suspend; ++ display->resume = dpi_display_resume; ++ display->set_mode = dpi_display_set_mode; ++ display->set_timings = dpi_set_timings; ++ display->check_timings = dpi_check_timings; ++ display->get_timings = dpi_get_timings; ++ display->set_update_mode = dpi_display_set_update_mode; ++ display->get_update_mode = dpi_display_get_update_mode; ++} ++ ++int dpi_init(void) ++{ ++ dpi.dss_ick = get_dss_ick(); ++ dpi.dss1_fck = get_dss1_fck(); ++ ++ return 0; ++} ++ ++void dpi_exit(void) ++{ ++} ++ +diff --git a/arch/arm/plat-omap/dss/dss.c b/arch/arm/plat-omap/dss/dss.c +new file mode 100644 +index 0000000..da0364b +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dss.c +@@ -0,0 +1,547 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dss.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DSS" ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/io.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/delay.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++ ++#include <mach/display.h> ++#include <mach/clock.h> ++#include "dss.h" ++ ++#define DSS_BASE 0x48050000 ++ ++struct dss_reg { ++ u16 idx; ++}; ++ ++#define DSS_REG(idx) ((const struct dss_reg) { idx }) ++ ++#define DSS_REVISION DSS_REG(0x0000) ++#define DSS_SYSCONFIG DSS_REG(0x0010) ++#define DSS_SYSSTATUS DSS_REG(0x0014) ++#define DSS_IRQSTATUS DSS_REG(0x0018) ++#define DSS_CONTROL DSS_REG(0x0040) ++#define DSS_SDI_CONTROL DSS_REG(0x0044) ++#define DSS_PLL_CONTROL DSS_REG(0x0048) ++#define DSS_SDI_STATUS DSS_REG(0x005C) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) ++ ++static struct { ++ void __iomem *base; ++ ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ struct clk *dss2_fck; ++ struct clk *dss_54m_fck; ++ struct clk *dss_96m_fck; ++} dss; ++ ++static inline void dss_write_reg(const struct dss_reg idx, u32 val) ++{ ++ __raw_writel(val, dss.base + idx.idx); ++} ++ ++static inline u32 dss_read_reg(const struct dss_reg idx) ++{ ++ return __raw_readl(dss.base + idx.idx); ++} ++ ++void dss_sdi_init(int datapairs) ++{ ++ u32 l; ++ ++ BUG_ON(datapairs > 3 || datapairs < 1); ++ ++ l = dss_read_reg(DSS_SDI_CONTROL); ++ l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */ ++ l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */ ++ l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */ ++ dss_write_reg(DSS_SDI_CONTROL, l); ++ ++ l = dss_read_reg(DSS_PLL_CONTROL); ++ l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */ ++ l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */ ++ l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */ ++ dss_write_reg(DSS_PLL_CONTROL, l); ++ ++ /* Reset SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */ ++ udelay(1); /* wait 2x PCLK */ ++ ++ /* Lock SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */ ++ ++ /* Waiting for PLL lock request to complete */ ++ while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6)) ++ ; ++ ++ /* Clearing PLL_GO bit */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28); ++ ++ /* Waiting for PLL to lock */ ++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) ++ ; ++ ++ dispc_lcd_enable_signal(1); ++ ++ /* Waiting for SDI reset to complete */ ++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) ++ ; ++} ++ ++static int get_dss_clocks(void) ++{ ++ const struct { ++ struct clk **clock; ++ char *omap2_name; ++ char *omap3_name; ++ } clocks[5] = { ++ { &dss.dss_ick, "dss_ick", "dss_ick" }, /* L3 & L4 ick */ ++ { &dss.dss1_fck, "dss1_fck", "dss1_alwon_fck" }, ++ { &dss.dss2_fck, "dss2_fck", "dss2_alwon_fck" }, ++ { &dss.dss_54m_fck, "dss_54m_fck", "dss_tv_fck" }, ++ { &dss.dss_96m_fck, NULL, "dss_96m_fck" }, ++ }; ++ ++ int r = 0; ++ int i; ++ const int num_clocks = 5; ++ ++ for (i = 0; i < num_clocks; i++) ++ *clocks[i].clock = NULL; ++ ++ for (i = 0; i < num_clocks; i++) { ++ struct clk *clk; ++ const char *clk_name; ++ ++ clk_name = cpu_is_omap34xx() ? clocks[i].omap3_name ++ : clocks[i].omap2_name; ++ ++ if (!clk_name) ++ continue; ++ ++ clk = clk_get(NULL, clk_name); ++ ++ if (IS_ERR(clk)) { ++ DSSERR("can't get clock %s", clk_name); ++ r = PTR_ERR(clk); ++ goto err; ++ } ++ ++ DSSDBG("clk %s, rate %ld\n", ++ clk_name, clk_get_rate(clk)); ++ ++ *clocks[i].clock = clk; ++ } ++ ++ return 0; ++ ++err: ++ for (i = 0; i < num_clocks; i++) { ++ if (!IS_ERR(*clocks[i].clock)) ++ clk_put(*clocks[i].clock); ++ } ++ ++ return r; ++} ++ ++static void put_dss_clocks(void) ++{ ++ if (dss.dss_96m_fck) ++ clk_put(dss.dss_96m_fck); ++ clk_put(dss.dss_54m_fck); ++ clk_put(dss.dss1_fck); ++ clk_put(dss.dss2_fck); ++ clk_put(dss.dss_ick); ++} ++ ++struct clk *get_dss_ick(void) ++{ ++ return dss.dss_ick; ++} ++ ++struct clk *get_dss1_fck(void) ++{ ++ return dss.dss1_fck; ++} ++ ++struct clk *get_dss2_fck(void) ++{ ++ return dss.dss2_fck; ++} ++ ++struct clk *get_tv_fck(void) ++{ ++ return dss.dss_54m_fck; ++} ++ ++struct clk *get_96m_fck(void) ++{ ++ return dss.dss_96m_fck; ++} ++ ++static void enable_dss_clocks(void) ++{ ++ clk_enable(dss.dss_ick); ++ clk_enable(dss.dss1_fck); ++ clk_enable(dss.dss2_fck); ++ clk_enable(dss.dss_54m_fck); ++ if (dss.dss_96m_fck) ++ clk_enable(dss.dss_96m_fck); ++} ++ ++static void disable_dss_clocks(void) ++{ ++ clk_disable(dss.dss_ick); ++ clk_disable(dss.dss1_fck); ++ clk_disable(dss.dss2_fck); ++ clk_disable(dss.dss_54m_fck); ++ if (dss.dss_96m_fck) ++ clk_disable(dss.dss_96m_fck); ++} ++ ++void dss_select_clk_source(int dsi, int dispc) ++{ ++ u32 r; ++ r = dss_read_reg(DSS_CONTROL); ++ r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */ ++ r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */ ++ dss_write_reg(DSS_CONTROL, r); ++} ++ ++int dss_get_dsi_clk_source(void) ++{ ++ return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1); ++} ++ ++int dss_get_dispc_clk_source(void) ++{ ++ return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0); ++} ++ ++static irqreturn_t dss_irq_handler(int irq, void *arg) ++{ ++#ifdef CONFIG_ARCH_OMAP3 ++ u32 irqstatus; ++ ++ clk_enable(dss.dss_ick); ++ clk_enable(dss.dss1_fck); ++ ++ irqstatus = dss_read_reg(DSS_IRQSTATUS); ++ ++ if (irqstatus & (1<<0)) /* DISPC_IRQ */ ++ dispc_irq_handler(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ if (irqstatus & (1<<1)) /* DSI_IRQ */ ++ dsi_irq_handler(); ++#endif ++#else /* OMAP2 */ ++ dispc_irq_handler(); ++#endif ++ ++ clk_disable(dss.dss1_fck); ++ clk_disable(dss.dss_ick); ++ ++ return IRQ_HANDLED; ++} ++ ++ ++static int _omap_dss_reset(void) ++{ ++ int timeout = 10000; ++ int r = 0; ++ ++ /* Soft reset */ ++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1); ++ ++ while (!(dss_read_reg(DSS_SYSSTATUS) & 1)) { ++ if (!--timeout) { ++ DSSERR("soft reset failed\n"); ++ r = -ENODEV; ++ break; ++ } ++ } ++ ++ return r; ++} ++ ++void dss_set_venc_output(enum omap_dss_venc_type type) ++{ ++ int l = 0; ++ ++ if (type == OMAP_DSS_VENC_TYPE_COMPOSITE) ++ l = 0; ++ else if (type == OMAP_DSS_VENC_TYPE_SVIDEO) ++ l = 1; ++ else ++ BUG(); ++ ++ /* venc out selection. 0 = comp, 1 = svideo */ ++ REG_FLD_MOD(DSS_CONTROL, l, 6, 6); ++} ++ ++void dss_set_dac_pwrdn_bgz(int enable) ++{ ++ REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ ++} ++ ++int dss_init(void) ++{ ++ int r; ++ u32 rev; ++ ++ dss.base = ioremap(DSS_BASE, SZ_512); ++ if (!dss.base) { ++ DSSERR("can't ioremap DSS\n"); ++ r = -ENOMEM; ++ goto fail0; ++ } ++ ++ r = get_dss_clocks(); ++ if (r) ++ goto fail1; ++ ++ enable_dss_clocks(); ++ ++ _omap_dss_reset(); ++ ++ /* autoidle */ ++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0); ++ ++ /* Select DPLL */ ++ REG_FLD_MOD(DSS_CONTROL, 0, 0, 0); ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */ ++ REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */ ++ REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */ ++#endif ++ ++ r = request_irq(INT_24XX_DSS_IRQ, dss_irq_handler, ++ 0, "OMAP DSS", NULL); ++ ++ if (r < 0) { ++ DSSERR("omap2 dss: request_irq failed\n"); ++ goto fail2; ++ } ++ ++ rev = dss_read_reg(DSS_REVISION); ++ printk(KERN_INFO "OMAP DSS rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ disable_dss_clocks(); ++ return 0; ++ ++fail2: ++ disable_dss_clocks(); ++ put_dss_clocks(); ++fail1: ++ iounmap(dss.base); ++fail0: ++ return r; ++} ++ ++void dss_exit(void) ++{ ++ int c; ++ ++ free_irq(INT_24XX_DSS_IRQ, NULL); ++ ++ /* these should be removed at some point */ ++ c = clk_get_usecount(dss.dss_ick); ++ if (c > 0) { ++ DSSERR("warning: dss_ick usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(dss.dss_ick); ++ } ++ ++ c = clk_get_usecount(dss.dss1_fck); ++ if (c > 0) { ++ DSSERR("warning: dss1_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(dss.dss1_fck); ++ } ++ ++ c = clk_get_usecount(dss.dss2_fck); ++ if (c > 0) { ++ DSSERR("warning: dss2_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(dss.dss2_fck); ++ } ++ ++ c = clk_get_usecount(dss.dss_54m_fck); ++ if (c > 0) { ++ DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(dss.dss_54m_fck); ++ } ++ ++ if (dss.dss_96m_fck) { ++ c = clk_get_usecount(dss.dss_96m_fck); ++ if (c > 0) { ++ DSSERR("warning: dss_96m_fck usecount %d, disabling\n", ++ c); ++ while (c-- > 0) ++ clk_disable(dss.dss_96m_fck); ++ } ++ } ++ ++ put_dss_clocks(); ++ ++ iounmap(dss.base); ++} ++ ++ ++ ++static int omap_dss_probe(struct platform_device *pdev) ++{ ++ struct omap_dss_platform_data *pdata = pdev->dev.platform_data; ++ ++ int r; ++ ++ r = dss_init(); ++ if (r) { ++ DSSERR("Failed to initialize DSS\n"); ++ goto fail0; ++ } ++ ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ r = rfbi_init(); ++ if (r) { ++ DSSERR("Failed to initialize rfbi\n"); ++ goto fail0; ++ } ++#endif ++ ++ r = dpi_init(); ++ if (r) { ++ DSSERR("Failed to initialize dpi\n"); ++ goto fail0; ++ } ++ ++ r = dispc_init(); ++ if (r) { ++ DSSERR("Failed to initialize dispc\n"); ++ goto fail0; ++ } ++#ifdef CONFIG_OMAP2_DSS_VENC ++ r = venc_init(); ++ if (r) { ++ DSSERR("Failed to initialize venc\n"); ++ goto fail0; ++ } ++#endif ++ if (cpu_is_omap34xx()) { ++#ifdef CONFIG_OMAP2_DSS_SDI ++ r = sdi_init(); ++ if (r) { ++ DSSERR("Failed to initialize SDI\n"); ++ goto fail0; ++ } ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ r = dsi_init(); ++ if (r) { ++ DSSERR("Failed to initialize DSI\n"); ++ goto fail0; ++ } ++#endif ++ } ++ ++ initialize_displays(pdata); ++ ++ r = initialize_sysfs(&pdev->dev); ++ if (r) ++ goto fail0; ++ ++ initialize_overlays(); ++ ++ return 0; ++ ++fail0: ++ return r; ++} ++ ++static int omap_dss_remove(struct platform_device *pdev) ++{ ++ uninitialize_sysfs(&pdev->dev); ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ venc_exit(); ++#endif ++ dispc_exit(); ++ dpi_exit(); ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ rfbi_exit(); ++#endif ++ if (cpu_is_omap34xx()) { ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_exit(); ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ sdi_exit(); ++#endif ++ } ++ ++ dss_exit(); ++ ++ return 0; ++} ++ ++ ++static struct platform_driver omap_dss_driver = { ++ .probe = omap_dss_probe, ++ .remove = omap_dss_remove, ++ .driver = { ++ .name = "omap-dss", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init omap_dss_init(void) ++{ ++ return platform_driver_register(&omap_dss_driver); ++} ++ ++static void __exit omap_dss_exit(void) ++{ ++ platform_driver_unregister(&omap_dss_driver); ++} ++ ++subsys_initcall(omap_dss_init); ++module_exit(omap_dss_exit); ++ ++ ++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); ++MODULE_DESCRIPTION("OMAP2/3 Display Subsystem"); ++MODULE_LICENSE("GPL v2"); ++ +diff --git a/arch/arm/plat-omap/dss/dss.h b/arch/arm/plat-omap/dss/dss.h +new file mode 100644 +index 0000000..4df7f67 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dss.h +@@ -0,0 +1,240 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dss.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#ifndef __OMAP2_DSS_H ++#define __OMAP2_DSS_H ++ ++#ifdef CONFIG_OMAP2_DSS_DEBUG ++#define DEBUG ++#endif ++ ++#ifdef DEBUG ++#ifdef DSS_SUBSYS_NAME ++#define DSSDBG(format, ...) \ ++ printk(KERN_DEBUG "omap-dss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSDBG(format, ...) \ ++ printk(KERN_DEBUG "omap-dss: " format, ## __VA_ARGS__) ++#endif ++#else ++#define DSSDBG(format, ...) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSERR(format, ...) \ ++ printk(KERN_ERR "omap-dss " DSS_SUBSYS_NAME " error: " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSERR(format, ...) \ ++ printk(KERN_ERR "omap-dss error: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSINFO(format, ...) \ ++ printk(KERN_INFO "omap-dss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSINFO(format, ...) \ ++ printk(KERN_INFO "omap-dss: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSWARN(format, ...) \ ++ printk(KERN_WARNING "omap-dss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSWARN(format, ...) \ ++ printk(KERN_WARNING "omap-dss: " format, ## __VA_ARGS__) ++#endif ++ ++/* OMAP TRM gives bitfields as start:end, where start is the higher bit ++ number. For example 7:0 */ ++#define FLD_MASK(start, end) (((1 << (start - end + 1)) - 1) << (end)) ++#define FLD_VAL(val, start, end) (((val) << end) & FLD_MASK(start, end)) ++#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end)) ++#define FLD_MOD(orig, val, start, end) \ ++ (((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end)) ++ ++#define DISPC_MAX_FCK 173000000 ++ ++enum omap_burst_size { ++ OMAP_DSS_BURST_4x32 = 0, ++ OMAP_DSS_BURST_8x32 = 1, ++ OMAP_DSS_BURST_16x32 = 2, ++}; ++ ++enum omap_parallel_interface_mode { ++ OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */ ++ OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */ ++ OMAP_DSS_PARALLELMODE_DSI, ++}; ++ ++int initialize_sysfs(struct device *dev); ++void uninitialize_sysfs(struct device *dev); ++void initialize_displays(struct omap_dss_platform_data *pdata); ++void initialize_overlays(void); ++ ++/* DSS */ ++int dss_init(void); ++void dss_exit(void); ++ ++void dss_sdi_init(int datapairs); ++void dss_select_clk_source(int dsi, int dispc); ++int dss_get_dsi_clk_source(void); ++int dss_get_dispc_clk_source(void); ++void dss_set_venc_output(enum omap_dss_venc_type type); ++void dss_set_dac_pwrdn_bgz(int enable); ++ ++struct clk *get_dss_ick(void); ++struct clk *get_dss1_fck(void); ++struct clk *get_dss2_fck(void); ++struct clk *get_tv_fck(void); ++struct clk *get_96m_fck(void); ++ ++/* SDI */ ++int sdi_init(void); ++void sdi_exit(void); ++void sdi_init_display(struct omap_display *display); ++ ++ ++/* DSI */ ++struct dsi_clock_info { ++ /* rates that we get with dividers below */ ++ unsigned long fint; ++ unsigned long dsiphy; ++ unsigned long clkin; /* input clk for DSI PLL */ ++ unsigned long dispc_fck; /* output clk, DSI1_PLL_FCLK */ ++ unsigned long dsi_fck; /* output clk, DSI2_PLL_FCLK */ ++ unsigned long pck; /* dispc pixel clock */ ++ ++ /* dividers */ ++ int regn; ++ int regm; ++ int regm3; ++ int regm4; ++ ++ int lck_div; ++ int pck_div; ++ ++ int highfreq; ++ int use_dss2_fck; ++}; ++ ++int dsi_init(void); ++void dsi_exit(void); ++void dsi_init_display(struct omap_display *display); ++void dsi_irq_handler(void); ++unsigned long dsi_get_dsi1_pll_rate(void); ++unsigned long dsi_get_dsi2_pll_rate(void); ++int dsi_pll_calc_pck(int is_tft, unsigned long pck, ++ struct dsi_clock_info *cinfo); ++int dsi_pll_program(struct dsi_clock_info *cinfo); ++int dsi_pll_init(int enable_hsclk, int enable_hsdiv); ++void dsi_pll_uninit(void); ++ssize_t dsi_print_clocks(char *buf, ssize_t size); ++ ++/* DPI */ ++int dpi_init(void); ++void dpi_exit(void); ++void dpi_init_display(struct omap_display *display); ++ ++/* DISPC */ ++int dispc_init(void); ++void dispc_exit(void); ++void dispc_irq_handler(void); ++void dispc_fake_vsync_irq(void); ++ ++void dispc_lcd_enable_signal_polarity(int act_high); ++void dispc_lcd_enable_signal(int enable); ++void dispc_pck_free_enable(int enable); ++void dispc_enable_fifohandcheck(int enable); ++ ++void dispc_set_lcd_size(int width, int height); ++void dispc_set_digit_size(int width, int height); ++void dispc_setup_plane_fifo(enum omap_plane plane, int ext_mode); ++ ++void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr); ++void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr); ++void dispc_set_plane_pos(enum omap_plane plane, int x, int y); ++void dispc_set_plane_size(enum omap_plane plane, int width, int height); ++void dispc_set_row_inc(enum omap_plane plane, int inc); ++ ++int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, ++ u32 paddr, int screen_width, ++ int pos_x, int pos_y, ++ int width, int height, ++ int out_width, int out_height, ++ enum omap_color_mode color_mode, ++ int ilace); ++ ++void dispc_go(enum omap_channel channel); ++void dispc_enable_lcd_out(int enable); ++void dispc_enable_digit_out(int enable); ++int dispc_enable_plane(enum omap_plane plane, int enable); ++ ++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode); ++void dispc_set_tft_data_lines(int data_lines); ++void dispc_set_lcd_display_type(enum omap_lcd_display_type type); ++void dispc_set_loadmode(enum omap_dss_load_mode mode); ++ ++void dispc_set_default_color(enum omap_channel channel, u32 color); ++void dispc_set_trans_key(enum omap_channel ch, ++ enum omap_dss_color_key_type type, ++ u32 trans_key); ++void dispc_enable_trans_key(enum omap_channel ch, int enable); ++ ++void dispc_set_lcd_timings(struct omap_video_timings *timings); ++unsigned long dispc_fclk_rate(void); ++unsigned long dispc_pclk_rate(void); ++void dispc_set_pol_freq(struct omap_panel *panel); ++unsigned long dispc_calc_clock_div(int is_tft, int pck, int *fck_div, ++ int *lck_div, int *pck_div); ++void dispc_set_clock_div(int fck_div, int lck_div, int pck_div); ++void dispc_set_lcd_divisor(int lck_div, int pck_div); ++int dispc_pixel_clock_valid(int pixel_clock); ++ ++void dispc_setup_partial_planes(struct omap_display *display, ++ int *x, int *y, int *w, int *h); ++void dispc_draw_partial_planes(struct omap_display *display); ++ ++ ++ssize_t dispc_print_clocks(char *buf, ssize_t size); ++ ++/* VENC */ ++int venc_init(void); ++void venc_exit(void); ++void venc_init_display(struct omap_display *display); ++ ++/* RFBI */ ++int rfbi_init(void); ++void rfbi_exit(void); ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines); ++void rfbi_enable_rfbi(int enable); ++void rfbi_transfer_area(int width, int height, ++ void (callback)(void *data), void *data); ++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); ++unsigned long rfbi_get_max_tx_rate(void); ++void rfbi_init_display(struct omap_display *display); ++ ++#endif +diff --git a/arch/arm/plat-omap/dss/sdi.c b/arch/arm/plat-omap/dss/sdi.c +new file mode 100644 +index 0000000..3f114f2 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/sdi.c +@@ -0,0 +1,154 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/sdi.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "SDI" ++ ++#include <linux/kernel.h> ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++ ++#include <mach/board.h> ++#include <mach/display.h> ++#include "dss.h" ++ ++ ++static struct { ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ int update_enabled; ++} sdi; ++ ++static int sdi_display_enable(struct omap_display *display) ++{ ++ int fck_div, lck_div, pck_div; ++ unsigned long fck; ++ ++ struct omap_panel *panel = display->panel; ++ ++ ++ panel->enable(display); ++ ++ clk_enable(sdi.dss_ick); ++ clk_enable(sdi.dss1_fck); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); ++ dispc_set_lcd_size(display->x_res, display->y_res); ++ ++ /* 15.5.9.1.2 */ ++ panel->config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; ++ ++ dispc_set_lcd_timings(&panel->timings); ++ dispc_set_pol_freq(panel); ++ ++ fck = dispc_calc_clock_div(1, panel->timings.pixel_clock*1000, ++ &fck_div, &lck_div, &pck_div); ++ ++ if (fck == 0) { ++ DSSERR("Requested pixel clock is not possible\n"); ++ return -EINVAL; ++ } ++ ++ dispc_set_clock_div(fck_div, lck_div, pck_div); ++ ++ panel->timings.pixel_clock = fck / lck_div / pck_div / 1000; ++ ++ DSSDBG("fck %lu, lck_div %d, pck_div %d\n", fck, lck_div, pck_div); ++ DSSDBG("pixel clock changed to %d\n", panel->timings.pixel_clock); ++ ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ dispc_set_tft_data_lines(24); ++ dispc_lcd_enable_signal_polarity(1); ++ dispc_pck_free_enable(1); ++ ++ dss_sdi_init(display->hw_config.u.sdi.datapairs); ++ ++ mdelay(2); ++ ++ dispc_enable_lcd_out(1); ++ ++ return 0; ++} ++ ++static void sdi_display_disable(struct omap_display *display) ++{ ++ display->panel->disable(display); ++ dispc_enable_lcd_out(0); ++ ++ clk_disable(sdi.dss_ick); ++ clk_disable(sdi.dss1_fck); ++} ++ ++static void sdi_display_set_mode(struct omap_display *display, ++ int x_res, int y_res, int bpp) ++{ ++ if (display->ctrl && display->ctrl->set_mode) ++ display->ctrl->set_mode(display, x_res, y_res, bpp); ++ if (display->panel && display->panel->set_mode) ++ display->panel->set_mode(display, x_res, y_res, bpp); ++} ++ ++static int sdi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return -EINVAL; ++ ++ if (mode == OMAP_DSS_UPDATE_DISABLED) { ++ dispc_enable_lcd_out(0); ++ sdi.update_enabled = 0; ++ } else { ++ dispc_enable_lcd_out(1); ++ sdi.update_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode sdi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO : ++ OMAP_DSS_UPDATE_DISABLED; ++} ++ ++ ++void sdi_init_display(struct omap_display *display) ++{ ++ DSSDBG("SDI init\n"); ++ ++ display->enable = sdi_display_enable; ++ display->disable = sdi_display_disable; ++ display->set_mode = sdi_display_set_mode; ++ display->set_update_mode = sdi_display_set_update_mode; ++ display->get_update_mode = sdi_display_get_update_mode; ++} ++ ++int sdi_init(void) ++{ ++ sdi.dss_ick = get_dss_ick(); ++ sdi.dss1_fck = get_dss1_fck(); ++ ++ return 0; ++} ++ ++void sdi_exit(void) ++{ ++} +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +new file mode 100644 +index 0000000..05e78de +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -0,0 +1,458 @@ ++/* ++ * linux/include/asm-arm/arch-omap/display.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#ifndef __ASM_ARCH_OMAP_DISPLAY_H ++#define __ASM_ARCH_OMAP_DISPLAY_H ++ ++#include <asm/atomic.h> ++ ++#define DISPC_IRQ_FRAMEDONE (1 << 0) ++#define DISPC_IRQ_VSYNC (1 << 1) ++#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) ++#define DISPC_IRQ_EVSYNC_ODD (1 << 3) ++#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) ++#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) ++#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) ++#define DISPC_IRQ_GFX_END_WIN (1 << 7) ++#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) ++#define DISPC_IRQ_OCP_ERR (1 << 9) ++#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) ++#define DISPC_IRQ_VID1_END_WIN (1 << 11) ++#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) ++#define DISPC_IRQ_VID2_END_WIN (1 << 13) ++#define DISPC_IRQ_SYNC_LOST (1 << 14) ++#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) ++ ++enum omap_display_type { ++ OMAP_DISPLAY_TYPE_NONE = 0, ++ OMAP_DISPLAY_TYPE_DPI = 1 << 0, ++ OMAP_DISPLAY_TYPE_DBI = 1 << 1, ++ OMAP_DISPLAY_TYPE_SDI = 1 << 2, ++ OMAP_DISPLAY_TYPE_DSI = 1 << 3, ++ OMAP_DISPLAY_TYPE_VENC = 1 << 4, ++}; ++ ++enum omap_plane { ++ OMAP_DSS_GFX = 0, ++ OMAP_DSS_VIDEO1 = 1, ++ OMAP_DSS_VIDEO2 = 2 ++}; ++ ++enum omap_channel { ++ OMAP_DSS_CHANNEL_LCD = 0, ++ OMAP_DSS_CHANNEL_DIGIT = 1, ++}; ++ ++enum omap_color_mode { ++ OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ ++ OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ ++ OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ ++ OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ ++ OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ ++ OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ ++ OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ ++ OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ ++ OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ ++ OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ ++ OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ ++ OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ ++ OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ ++ OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ ++ ++ OMAP_DSS_COLOR_GFX_OMAP3 = ++ OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | ++ OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | ++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | ++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | ++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | ++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, ++ ++ OMAP_DSS_COLOR_VID_OMAP3 = ++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | ++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | ++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | ++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 | ++ OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, ++}; ++ ++enum omap_lcd_display_type { ++ OMAP_DSS_LCD_DISPLAY_STN, ++ OMAP_DSS_LCD_DISPLAY_TFT, ++}; ++ ++enum omap_dss_load_mode { ++ OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, ++ OMAP_DSS_LOAD_CLUT_ONLY = 1, ++ OMAP_DSS_LOAD_FRAME_ONLY = 2, ++ OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, ++}; ++ ++enum omap_dss_color_key_type { ++ OMAP_DSS_COLOR_KEY_GFX_DST = 0, ++ OMAP_DSS_COLOR_KEY_VID_SRC = 1, ++}; ++ ++enum omap_rfbi_te_mode { ++ OMAP_DSS_RFBI_TE_MODE_1 = 1, ++ OMAP_DSS_RFBI_TE_MODE_2 = 2, ++}; ++ ++enum omap_panel_config { ++ OMAP_DSS_LCD_IVS = 1<<0, ++ OMAP_DSS_LCD_IHS = 1<<1, ++ OMAP_DSS_LCD_IPC = 1<<2, ++ OMAP_DSS_LCD_IEO = 1<<3, ++ OMAP_DSS_LCD_RF = 1<<4, ++ OMAP_DSS_LCD_ONOFF = 1<<5, ++ ++ OMAP_DSS_LCD_TFT = 1<<20, ++}; ++ ++enum omap_dss_venc_type { ++ OMAP_DSS_VENC_TYPE_COMPOSITE, ++ OMAP_DSS_VENC_TYPE_SVIDEO, ++}; ++ ++struct omap_display; ++struct omap_panel; ++struct omap_ctrl; ++ ++/* RFBI */ ++ ++struct rfbi_timings { ++ int cs_on_time; ++ int cs_off_time; ++ int we_on_time; ++ int we_off_time; ++ int re_on_time; ++ int re_off_time; ++ int we_cycle_time; ++ int re_cycle_time; ++ int cs_pulse_width; ++ int access_time; ++ ++ int clk_div; ++ ++ u32 tim[5]; /* set by rfbi_convert_timings() */ ++ ++ int converted; ++}; ++ ++void omap_rfbi_write_command(const void *buf, u32 len); ++void omap_rfbi_read_data(void *buf, u32 len); ++void omap_rfbi_write_data(const void *buf, u32 len); ++void omap_rfbi_write_pixels(const void *buf, int scr_width, int x, int y, ++ int w, int h); ++int omap_rfbi_enable_te(int enable, unsigned line); ++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int extif_div); ++ ++/* DSI */ ++int dsi_vc_dcs_write(int channel, u8 *data, int len); ++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); ++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); ++int dsi_vc_set_max_rx_packet_size(int channel, u16 len); ++int dsi_vc_send_null(int channel); ++ ++/* Board specific data */ ++struct omap_display_data { ++ enum omap_display_type type; ++ ++ union { ++ struct { ++ int data_lines; ++ } dpi; ++ ++ struct { ++ int channel; ++ int data_lines; ++ } rfbi; ++ ++ struct { ++ int datapairs; ++ } sdi; ++ ++ struct { ++ int clk_lane; ++ int clk_pol; ++ int data1_lane; ++ int data1_pol; ++ int data2_lane; ++ int data2_pol; ++ } dsi; ++ ++ struct { ++ enum omap_dss_venc_type type; ++ } venc; ++ } u; ++ ++ int panel_reset_gpio; ++ int ctrl_reset_gpio; ++ ++ const char *name; /* for debug */ ++ const char *ctrl_name; ++ const char *panel_name; ++ ++ void *priv; ++ ++ /* platform specific enable/disable */ ++ int (*panel_enable)(struct omap_display *display); ++ void (*panel_disable)(struct omap_display *display); ++ int (*ctrl_enable)(struct omap_display *display); ++ void (*ctrl_disable)(struct omap_display *display); ++}; ++ ++/* Board specific data */ ++struct omap_dss_platform_data { ++ int num_displays; ++ struct omap_display_data *displays[]; ++}; ++ ++struct omap_ctrl { ++ struct module *owner; ++ ++ const char *name; ++ ++ int (*init)(struct omap_display *display); ++ void (*cleanup)(struct omap_display *display); ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ void (*setup_update)(struct omap_display *display, ++ int x, int y, int w, int h); ++ void (*set_mode)(struct omap_display *display, ++ int x_res, int y_res, int bpp); ++ ++ int (*enable_te)(struct omap_display *display, int enable); ++ ++ int (*run_test)(struct omap_display *display, int test); ++ ++ int bpp; ++ ++ struct rfbi_timings timings; ++ ++ void *priv; ++}; ++ ++struct omap_video_timings { ++ /* Unit: KHz */ ++ u32 pixel_clock; ++ /* Unit: pixel clocks */ ++ u16 hsw; /* Horizontal synchronization pulse width */ ++ /* Unit: pixel clocks */ ++ u16 hfp; /* Horizontal front porch */ ++ /* Unit: pixel clocks */ ++ u16 hbp; /* Horizontal back porch */ ++ /* Unit: line clocks */ ++ u16 vsw; /* Vertical synchronization pulse width */ ++ /* Unit: line clocks */ ++ u16 vfp; /* Vertical front porch */ ++ /* Unit: line clocks */ ++ u16 vbp; /* Vertical back porch */ ++}; ++ ++struct omap_panel { ++ struct module *owner; ++ ++ const char *name; ++ ++ int (*init)(struct omap_display *display); ++ void (*cleanup)(struct omap_display *display); ++ int (*remove)(struct omap_display *display); ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ void (*set_mode)(struct omap_display *display, ++ int x_res, int y_res, int bpp); ++ int (*run_test)(struct omap_display *display, int test); ++ ++ struct omap_video_timings timings; ++ ++ int acbi; /* ac-bias pin transitions per interrupt */ ++ /* Unit: line clocks */ ++ int acb; /* ac-bias pin frequency */ ++ ++ enum omap_panel_config config; ++ ++ int x_res, y_res; ++ int bpp; ++ ++ void *priv; ++}; ++ ++/* XXX perhaps this should be removed */ ++enum omap_dss_overlay_managers { ++ OMAP_DSS_OVL_MGR_LCD, ++ OMAP_DSS_OVL_MGR_TV, ++}; ++ ++struct omap_overlay_manager; ++ ++struct omap_overlay_info { ++ int enabled; ++ u32 paddr; ++ void *vaddr; ++ int screen_width; ++ int pos_x; ++ int pos_y; ++ int width; ++ int height; ++ int out_width; /* if 0, out_width == width */ ++ int out_height; /* if 0, out_height == height */ ++ enum omap_color_mode color_mode; ++}; ++ ++enum omap_overlay_caps { ++ OMAP_DSS_OVL_CAP_SCALE = 1 << 0, ++}; ++ ++struct omap_overlay { ++ ++ const char *name; ++ int id; ++ struct omap_overlay_manager *manager; ++ enum omap_color_mode supported_modes; ++ struct omap_overlay_info info; ++ enum omap_overlay_caps caps; ++ ++ int (*set_manager)(struct omap_overlay *ovl, ++ struct omap_overlay_manager *mgr); ++ int (*unset_manager)(struct omap_overlay *ovl); ++ ++ int (*setup_input)(struct omap_overlay *ovl, ++ u32 paddr, void *vaddr, ++ int screen_width, ++ int width, int height, ++ enum omap_color_mode color_mode); ++ int (*setup_output)(struct omap_overlay *ovl, ++ int pos_x, int pos_y, ++ int out_width, int out_height); ++ int (*enable)(struct omap_overlay *ovl, int enable); ++}; ++ ++enum omap_overlay_manager_caps { ++ OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, ++}; ++ ++struct omap_overlay_manager { ++ ++ const char *name; ++ int id; ++ enum omap_overlay_manager_caps caps; ++ struct omap_display *display; ++ int num_overlays; ++ struct omap_overlay *overlays; ++ enum omap_display_type supported_displays; ++ ++ int (*set_display)(struct omap_overlay_manager *mgr, ++ struct omap_display *display); ++ int (*unset_display)(struct omap_overlay_manager *mgr); ++ ++ int (*apply)(struct omap_overlay_manager *mgr); ++}; ++ ++enum omap_display_caps { ++ OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, ++}; ++ ++enum omap_dss_update_mode { ++ OMAP_DSS_UPDATE_DISABLED = 0, ++ OMAP_DSS_UPDATE_AUTO, ++ OMAP_DSS_UPDATE_MANUAL, ++}; ++ ++enum omap_dss_display_state { ++ OMAP_DSS_DISPLAY_DISABLED = 0, ++ OMAP_DSS_DISPLAY_ACTIVE, ++ OMAP_DSS_DISPLAY_SUSPENDED, ++}; ++ ++struct omap_display { ++ //atomic_t ref_count; ++ int ref_count; ++ ++ enum omap_display_type type; ++ const char *name; ++ ++ enum omap_display_caps caps; ++ ++ struct omap_overlay_manager *manager; ++ ++ int x_res, y_res; ++ int bpp; ++ ++ enum omap_dss_display_state state; ++ ++ struct omap_display_data hw_config; /* board specific data */ ++ struct omap_ctrl *ctrl; /* static common data */ ++ struct omap_panel *panel; /* static common data */ ++ ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ ++ void (*set_mode)(struct omap_display *display, ++ int x_res, int y_res, int bpp); ++ int (*check_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ void (*set_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ void (*get_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ int (*update)(struct omap_display *display, ++ int x, int y, int w, int h); ++ int (*sync)(struct omap_display *display); ++ ++ int (*set_update_mode)(struct omap_display *display, ++ enum omap_dss_update_mode); ++ enum omap_dss_update_mode (*get_update_mode) ++ (struct omap_display *display); ++ ++ int (*enable_te)(struct omap_display *display, int enable); ++ int (*get_te)(struct omap_display *display); ++ ++ int (*run_test)(struct omap_display *display, int test); ++}; ++ ++int omap_dss_get_num_displays(void); ++struct omap_display *omap_dss_get_display(int no); ++void omap_dss_put_display(struct omap_display *display); ++ ++void omap_dss_register_ctrl(struct omap_ctrl *ctrl); ++void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl); ++ ++void omap_dss_register_panel(struct omap_panel *panel); ++void omap_dss_unregister_panel(struct omap_panel *panel); ++ ++int omap_dss_get_num_overlay_managers(void); ++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); ++ ++int omap_dss_get_num_overlays(void); ++struct omap_overlay *omap_dss_get_overlay(int num); ++ ++typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); ++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); ++int omap_dispc_unregister_isr(omap_dispc_isr_t isr); ++ ++#endif +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0005-DSS-RFBI-support-for-OMAP2-3-DSS.patch b/packages/linux/linux-omap/0005-DSS-RFBI-support-for-OMAP2-3-DSS.patch new file mode 100644 index 0000000000..de376e6bd8 --- /dev/null +++ b/packages/linux/linux-omap/0005-DSS-RFBI-support-for-OMAP2-3-DSS.patch @@ -0,0 +1,1254 @@ +From 029f985ead9e1ea4f5d26c5ee1a234c144d2b418 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Tue, 4 Nov 2008 16:53:02 +0200 +Subject: [PATCH] DSS: RFBI support for OMAP2/3 DSS + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + arch/arm/plat-omap/dss/rfbi.c | 1234 +++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 1234 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/plat-omap/dss/rfbi.c + +diff --git a/arch/arm/plat-omap/dss/rfbi.c b/arch/arm/plat-omap/dss/rfbi.c +new file mode 100644 +index 0000000..31ddd24 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/rfbi.c +@@ -0,0 +1,1234 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/rfbi.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "RFBI" ++ ++#include <linux/kernel.h> ++#include <linux/dma-mapping.h> ++#include <linux/vmalloc.h> ++#include <linux/clk.h> ++#include <linux/io.h> ++#include <linux/delay.h> ++#include <linux/kfifo.h> ++#include <linux/ktime.h> ++ ++#include <mach/board.h> ++#include <mach/display.h> ++#include "dss.h" ++ ++/*#define MEASURE_PERF*/ ++ ++#define RFBI_BASE 0x48050800 ++ ++struct rfbi_reg { u16 idx; }; ++ ++#define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) ++ ++#define RFBI_REVISION RFBI_REG(0x0000) ++#define RFBI_SYSCONFIG RFBI_REG(0x0010) ++#define RFBI_SYSSTATUS RFBI_REG(0x0014) ++#define RFBI_CONTROL RFBI_REG(0x0040) ++#define RFBI_PIXEL_CNT RFBI_REG(0x0044) ++#define RFBI_LINE_NUMBER RFBI_REG(0x0048) ++#define RFBI_CMD RFBI_REG(0x004c) ++#define RFBI_PARAM RFBI_REG(0x0050) ++#define RFBI_DATA RFBI_REG(0x0054) ++#define RFBI_READ RFBI_REG(0x0058) ++#define RFBI_STATUS RFBI_REG(0x005c) ++ ++#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) ++#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) ++#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) ++#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) ++#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) ++#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) ++ ++#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) ++#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) ++ ++#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param)) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) ++ ++/* To work around an RFBI transfer rate limitation */ ++#define OMAP_RFBI_RATE_LIMIT 1 ++ ++enum omap_rfbi_cycleformat { ++ OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, ++ OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, ++ OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, ++ OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, ++}; ++ ++enum omap_rfbi_datatype { ++ OMAP_DSS_RFBI_DATATYPE_12 = 0, ++ OMAP_DSS_RFBI_DATATYPE_16 = 1, ++ OMAP_DSS_RFBI_DATATYPE_18 = 2, ++ OMAP_DSS_RFBI_DATATYPE_24 = 3, ++}; ++ ++enum omap_rfbi_parallelmode { ++ OMAP_DSS_RFBI_PARALLELMODE_8 = 0, ++ OMAP_DSS_RFBI_PARALLELMODE_9 = 1, ++ OMAP_DSS_RFBI_PARALLELMODE_12 = 2, ++ OMAP_DSS_RFBI_PARALLELMODE_16 = 3, ++}; ++ ++enum update_cmd { ++ RFBI_CMD_UPDATE = 0, ++ RFBI_CMD_SYNC = 1, ++}; ++ ++static int rfbi_convert_timings(struct rfbi_timings *t); ++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); ++static void process_cmd_fifo(void); ++ ++static struct { ++ void __iomem *base; ++ ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ ++ unsigned long l4_khz; ++ ++ enum omap_rfbi_datatype datatype; ++ enum omap_rfbi_parallelmode parallelmode; ++ ++ enum omap_rfbi_te_mode te_mode; ++ int te_enabled; ++ ++ void (*framedone_callback)(void *data); ++ void *framedone_callback_data; ++ ++ struct omap_display *display[2]; ++ ++ struct kfifo *cmd_fifo; ++ spinlock_t cmd_lock; ++ struct completion cmd_done; ++ atomic_t cmd_fifo_full; ++ atomic_t cmd_pending; ++#ifdef MEASURE_PERF ++ ktime_t perf_time; ++#endif ++} rfbi; ++ ++struct update_region { ++ u16 x; ++ u16 y; ++ u16 w; ++ u16 h; ++}; ++ ++struct update_param { ++ u8 rfbi_module; ++ u8 cmd; ++ ++ union { ++ struct update_region r; ++ struct completion *sync; ++ } par; ++}; ++ ++static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) ++{ ++ __raw_writel(val, rfbi.base + idx.idx); ++} ++ ++static inline u32 rfbi_read_reg(const struct rfbi_reg idx) ++{ ++ return __raw_readl(rfbi.base + idx.idx); ++} ++ ++static void rfbi_enable_clocks(int enable) ++{ ++ if (enable) { ++ clk_enable(rfbi.dss_ick); ++ clk_enable(rfbi.dss1_fck); ++ } else { ++ clk_disable(rfbi.dss1_fck); ++ clk_disable(rfbi.dss_ick); ++ } ++} ++ ++void omap_rfbi_write_command(const void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ const u8 *b = buf; ++ for (; len; len--) ++ rfbi_write_reg(RFBI_CMD, *b++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ const u16 *w = buf; ++ BUG_ON(len & 1); ++ for (; len; len -= 2) ++ rfbi_write_reg(RFBI_CMD, *w++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_command); ++ ++void omap_rfbi_read_data(void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ u8 *b = buf; ++ for (; len; len--) { ++ rfbi_write_reg(RFBI_READ, 0); ++ *b++ = rfbi_read_reg(RFBI_READ); ++ } ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ u16 *w = buf; ++ BUG_ON(len & ~1); ++ for (; len; len -= 2) { ++ rfbi_write_reg(RFBI_READ, 0); ++ *w++ = rfbi_read_reg(RFBI_READ); ++ } ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_read_data); ++ ++void omap_rfbi_write_data(const void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ const u8 *b = buf; ++ for (; len; len--) ++ rfbi_write_reg(RFBI_PARAM, *b++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ const u16 *w = buf; ++ BUG_ON(len & 1); ++ for (; len; len -= 2) ++ rfbi_write_reg(RFBI_PARAM, *w++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_data); ++ ++void omap_rfbi_write_pixels(const void *buf, int scr_width, int x, int y, ++ int w, int h) ++{ ++ int start_offset = scr_width * y + x; ++ int horiz_offset = scr_width - w; ++ int i; ++ ++ rfbi_enable_clocks(1); ++ ++ if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { ++ const u16 *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ const u8 *b = (const u8 *)pd; ++ rfbi_write_reg(RFBI_PARAM, *(b+1)); ++ rfbi_write_reg(RFBI_PARAM, *(b+0)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { ++ const u32 *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ const u8 *b = (const u8 *)pd; ++ rfbi_write_reg(RFBI_PARAM, *(b+2)); ++ rfbi_write_reg(RFBI_PARAM, *(b+1)); ++ rfbi_write_reg(RFBI_PARAM, *(b+0)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { ++ const u16 *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ rfbi_write_reg(RFBI_PARAM, *pd); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else { ++ BUG(); ++ } ++ ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_pixels); ++ ++void rfbi_transfer_area(int width, int height, ++ void (callback)(void *data), void *data) ++{ ++ u32 l; ++ ++ /*BUG_ON(callback == 0);*/ ++ BUG_ON(rfbi.framedone_callback != NULL); ++ ++ DSSDBG("rfbi_transfer_area %dx%d\n", width, height); ++ ++ dispc_set_lcd_size(width, height); ++ ++ dispc_enable_lcd_out(1); ++ ++ rfbi.framedone_callback = callback; ++ rfbi.framedone_callback_data = data; ++ ++ rfbi_enable_clocks(1); ++ ++#ifdef MEASURE_PERF ++ rfbi.perf_time = ktime_get(); ++#endif ++ rfbi_write_reg(RFBI_PIXEL_CNT, width * height); ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ l = FLD_MOD(l, 1, 0, 0); /* enable */ ++ if (!rfbi.te_enabled) ++ l = FLD_MOD(l, 1, 4, 4); /* ITE */ ++ ++ rfbi_write_reg(RFBI_CONTROL, l); ++} ++ ++static void framedone_callback(void *data, u32 mask) ++{ ++ void (*callback)(void *data); ++ ++#ifdef MEASURE_PERF ++ { ++ ktime_t t = ktime_get(); ++ t = ktime_sub(t, rfbi.perf_time); ++ DSSDBG("FRAMEDONE in %lld ns\n", ktime_to_ns(t)); ++ } ++#else ++ DSSDBG("FRAMEDONE\n"); ++#endif ++ ++ REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); ++ ++ rfbi_enable_clocks(0); ++ ++ callback = rfbi.framedone_callback; ++ rfbi.framedone_callback = NULL; ++ ++ /*callback(rfbi.framedone_callback_data);*/ ++ ++ atomic_set(&rfbi.cmd_pending, 0); ++ ++ process_cmd_fifo(); ++} ++ ++#if 1 /* VERBOSE */ ++static void rfbi_print_timings(void) ++{ ++ u32 l; ++ u32 time; ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ time = 1000000000 / rfbi.l4_khz; ++ if (l & (1 << 4)) ++ time *= 2; ++ ++ DSSDBG("Tick time %u ps\n", time); ++ l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); ++ DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " ++ "REONTIME %d, REOFFTIME %d\n", ++ l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, ++ (l >> 20) & 0x0f, (l >> 24) & 0x3f); ++ ++ l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); ++ DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " ++ "ACCESSTIME %d\n", ++ (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, ++ (l >> 22) & 0x3f); ++} ++#else ++static void rfbi_print_timings(void) {} ++#endif ++ ++ ++ ++ ++static u32 extif_clk_period; ++ ++static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) ++{ ++ int bus_tick = extif_clk_period * div; ++ return (ps + bus_tick - 1) / bus_tick * bus_tick; ++} ++ ++static int calc_reg_timing(struct rfbi_timings *t, int div) ++{ ++ t->clk_div = div; ++ ++ t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); ++ ++ t->we_on_time = round_to_extif_ticks(t->we_on_time, div); ++ t->we_off_time = round_to_extif_ticks(t->we_off_time, div); ++ t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); ++ ++ t->re_on_time = round_to_extif_ticks(t->re_on_time, div); ++ t->re_off_time = round_to_extif_ticks(t->re_off_time, div); ++ t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); ++ ++ t->access_time = round_to_extif_ticks(t->access_time, div); ++ t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); ++ t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); ++ ++ DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", ++ t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); ++ DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", ++ t->we_on_time, t->we_off_time, t->re_cycle_time, ++ t->we_cycle_time); ++ DSSDBG("[reg]rdaccess %d cspulse %d\n", ++ t->access_time, t->cs_pulse_width); ++ ++ return rfbi_convert_timings(t); ++} ++ ++static int calc_extif_timings(struct rfbi_timings *t) ++{ ++ u32 max_clk_div; ++ int div; ++ ++ rfbi_get_clk_info(&extif_clk_period, &max_clk_div); ++ for (div = 1; div <= max_clk_div; div++) { ++ if (calc_reg_timing(t, div) == 0) ++ break; ++ } ++ ++ if (div <= max_clk_div) ++ return 0; ++ ++ DSSERR("can't setup timings\n"); ++ return -1; ++} ++ ++ ++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) ++{ ++ int r; ++ ++ if (!t->converted) { ++ r = calc_extif_timings(t); ++ if (r < 0) ++ DSSERR("Failed to calc timings\n"); ++ } ++ ++ BUG_ON(!t->converted); ++ ++ rfbi_enable_clocks(1); ++ rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); ++ rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); ++ ++ /* TIMEGRANULARITY */ ++ REG_FLD_MOD(RFBI_CONFIG(rfbi_module), ++ (t->tim[2] ? 1 : 0), 4, 4); ++ ++ rfbi_print_timings(); ++ rfbi_enable_clocks(0); ++} ++ ++static int ps_to_rfbi_ticks(int time, int div) ++{ ++ unsigned long tick_ps; ++ int ret; ++ ++ /* Calculate in picosecs to yield more exact results */ ++ tick_ps = 1000000000 / (rfbi.l4_khz) * div; ++ ++ ret = (time + tick_ps - 1) / tick_ps; ++ ++ return ret; ++} ++ ++#ifdef OMAP_RFBI_RATE_LIMIT ++unsigned long rfbi_get_max_tx_rate(void) ++{ ++ unsigned long l4_rate, dss1_rate; ++ int min_l4_ticks = 0; ++ int i; ++ ++ /* According to TI this can't be calculated so make the ++ * adjustments for a couple of known frequencies and warn for ++ * others. ++ */ ++ static const struct { ++ unsigned long l4_clk; /* HZ */ ++ unsigned long dss1_clk; /* HZ */ ++ unsigned long min_l4_ticks; ++ } ftab[] = { ++ { 55, 132, 7, }, /* 7.86 MPix/s */ ++ { 110, 110, 12, }, /* 9.16 MPix/s */ ++ { 110, 132, 10, }, /* 11 Mpix/s */ ++ { 120, 120, 10, }, /* 12 Mpix/s */ ++ { 133, 133, 10, }, /* 13.3 Mpix/s */ ++ }; ++ ++ l4_rate = rfbi.l4_khz / 1000; ++ dss1_rate = clk_get_rate(rfbi.dss1_fck) / 1000000; ++ ++ for (i = 0; i < ARRAY_SIZE(ftab); i++) { ++ /* Use a window instead of an exact match, to account ++ * for different DPLL multiplier / divider pairs. ++ */ ++ if (abs(ftab[i].l4_clk - l4_rate) < 3 && ++ abs(ftab[i].dss1_clk - dss1_rate) < 3) { ++ min_l4_ticks = ftab[i].min_l4_ticks; ++ break; ++ } ++ } ++ if (i == ARRAY_SIZE(ftab)) { ++ /* Can't be sure, return anyway the maximum not ++ * rate-limited. This might cause a problem only for the ++ * tearing synchronisation. ++ */ ++ DSSERR("can't determine maximum RFBI transfer rate\n"); ++ return rfbi.l4_khz * 1000; ++ } ++ return rfbi.l4_khz * 1000 / min_l4_ticks; ++} ++#else ++int rfbi_get_max_tx_rate(void) ++{ ++ return rfbi.l4_khz * 1000; ++} ++#endif ++ ++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) ++{ ++ *clk_period = 1000000000 / rfbi.l4_khz; ++ *max_clk_div = 2; ++} ++ ++static int rfbi_convert_timings(struct rfbi_timings *t) ++{ ++ u32 l; ++ int reon, reoff, weon, weoff, cson, csoff, cs_pulse; ++ int actim, recyc, wecyc; ++ int div = t->clk_div; ++ ++ if (div <= 0 || div > 2) ++ return -1; ++ ++ /* Make sure that after conversion it still holds that: ++ * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, ++ * csoff > cson, csoff >= max(weoff, reoff), actim > reon ++ */ ++ weon = ps_to_rfbi_ticks(t->we_on_time, div); ++ weoff = ps_to_rfbi_ticks(t->we_off_time, div); ++ if (weoff <= weon) ++ weoff = weon + 1; ++ if (weon > 0x0f) ++ return -1; ++ if (weoff > 0x3f) ++ return -1; ++ ++ reon = ps_to_rfbi_ticks(t->re_on_time, div); ++ reoff = ps_to_rfbi_ticks(t->re_off_time, div); ++ if (reoff <= reon) ++ reoff = reon + 1; ++ if (reon > 0x0f) ++ return -1; ++ if (reoff > 0x3f) ++ return -1; ++ ++ cson = ps_to_rfbi_ticks(t->cs_on_time, div); ++ csoff = ps_to_rfbi_ticks(t->cs_off_time, div); ++ if (csoff <= cson) ++ csoff = cson + 1; ++ if (csoff < max(weoff, reoff)) ++ csoff = max(weoff, reoff); ++ if (cson > 0x0f) ++ return -1; ++ if (csoff > 0x3f) ++ return -1; ++ ++ l = cson; ++ l |= csoff << 4; ++ l |= weon << 10; ++ l |= weoff << 14; ++ l |= reon << 20; ++ l |= reoff << 24; ++ ++ t->tim[0] = l; ++ ++ actim = ps_to_rfbi_ticks(t->access_time, div); ++ if (actim <= reon) ++ actim = reon + 1; ++ if (actim > 0x3f) ++ return -1; ++ ++ wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); ++ if (wecyc < weoff) ++ wecyc = weoff; ++ if (wecyc > 0x3f) ++ return -1; ++ ++ recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); ++ if (recyc < reoff) ++ recyc = reoff; ++ if (recyc > 0x3f) ++ return -1; ++ ++ cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); ++ if (cs_pulse > 0x3f) ++ return -1; ++ ++ l = wecyc; ++ l |= recyc << 6; ++ l |= cs_pulse << 12; ++ l |= actim << 22; ++ ++ t->tim[1] = l; ++ ++ t->tim[2] = div - 1; ++ ++ t->converted = 1; ++ ++ return 0; ++} ++ ++/* xxx FIX module selection missing */ ++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int extif_div) ++{ ++ int hs, vs; ++ int min; ++ u32 l; ++ ++ hs = ps_to_rfbi_ticks(hs_pulse_time, 1); ++ vs = ps_to_rfbi_ticks(vs_pulse_time, 1); ++ if (hs < 2) ++ return -EDOM; ++ if (mode == OMAP_DSS_RFBI_TE_MODE_2) ++ min = 2; ++ else /* OMAP_DSS_RFBI_TE_MODE_1 */ ++ min = 4; ++ if (vs < min) ++ return -EDOM; ++ if (vs == hs) ++ return -EINVAL; ++ rfbi.te_mode = mode; ++ DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", ++ mode, hs, vs, hs_pol_inv, vs_pol_inv); ++ ++ rfbi_enable_clocks(1); ++ rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); ++ rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ if (hs_pol_inv) ++ l &= ~(1 << 21); ++ else ++ l |= 1 << 21; ++ if (vs_pol_inv) ++ l &= ~(1 << 20); ++ else ++ l |= 1 << 20; ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_rfbi_setup_te); ++ ++/* xxx FIX module selection missing */ ++int omap_rfbi_enable_te(int enable, unsigned line) ++{ ++ u32 l; ++ ++ DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); ++ if (line > (1 << 11) - 1) ++ return -EINVAL; ++ ++ rfbi_enable_clocks(1); ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ l &= ~(0x3 << 2); ++ if (enable) { ++ rfbi.te_enabled = 1; ++ l |= rfbi.te_mode << 2; ++ } else ++ rfbi.te_enabled = 0; ++ rfbi_write_reg(RFBI_CONFIG(0), l); ++ rfbi_write_reg(RFBI_LINE_NUMBER, line); ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_rfbi_enable_te); ++ ++#if 0 ++static void rfbi_enable_config(int enable1, int enable2) ++{ ++ u32 l; ++ int cs = 0; ++ ++ if (enable1) ++ cs |= 1<<0; ++ if (enable2) ++ cs |= 1<<1; ++ ++ rfbi_enable_clocks(1); ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ ++ l = FLD_MOD(l, cs, 3, 2); ++ l = FLD_MOD(l, 0, 1, 1); ++ ++ rfbi_write_reg(RFBI_CONTROL, l); ++ ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ ++ /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ ++ /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ ++ ++ l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ ++ l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ ++ l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ ++ ++ l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); ++ rfbi_write_reg(RFBI_CONFIG(0), l); ++ ++ rfbi_enable_clocks(0); ++} ++#endif ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines) ++{ ++ u32 l; ++ int cycle1 = 0, cycle2 = 0, cycle3 = 0; ++ enum omap_rfbi_cycleformat cycleformat; ++ enum omap_rfbi_datatype datatype; ++ enum omap_rfbi_parallelmode parallelmode; ++ ++ switch (bpp) { ++ case 12: ++ datatype = OMAP_DSS_RFBI_DATATYPE_12; ++ break; ++ case 16: ++ datatype = OMAP_DSS_RFBI_DATATYPE_16; ++ break; ++ case 18: ++ datatype = OMAP_DSS_RFBI_DATATYPE_18; ++ break; ++ case 24: ++ datatype = OMAP_DSS_RFBI_DATATYPE_24; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ rfbi.datatype = datatype; ++ ++ switch (lines) { ++ case 8: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; ++ break; ++ case 9: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; ++ break; ++ case 12: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; ++ break; ++ case 16: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ rfbi.parallelmode = parallelmode; ++ ++ if ((bpp % lines) == 0) { ++ switch (bpp / lines) { ++ case 1: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; ++ break; ++ case 2: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; ++ break; ++ case 3: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ } else if ((2 * bpp % lines) == 0) { ++ if ((2 * bpp / lines) == 3) ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; ++ else { ++ BUG(); ++ return 1; ++ } ++ } else { ++ BUG(); ++ return 1; ++ } ++ ++ switch (cycleformat) { ++ case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: ++ cycle1 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: ++ cycle1 = lines; ++ cycle2 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: ++ cycle1 = lines; ++ cycle2 = lines; ++ cycle3 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: ++ cycle1 = lines; ++ cycle2 = (lines / 2) | ((lines / 2) << 16); ++ cycle3 = (lines << 16); ++ break; ++ } ++ ++ rfbi_enable_clocks(1); ++ ++ REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ ++ ++ l = 0; ++ l |= FLD_VAL(parallelmode, 1, 0); ++ l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ ++ l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ ++ l |= FLD_VAL(datatype, 6, 5); ++ /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ ++ l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ ++ l |= FLD_VAL(cycleformat, 10, 9); ++ l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ ++ l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ ++ l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ ++ l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ ++ l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ ++ l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ ++ l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ ++ rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); ++ ++ rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); ++ rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); ++ rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); ++ ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ ++ l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ ++ rfbi_write_reg(RFBI_CONTROL, l); ++ ++ ++ DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", ++ bpp, lines, cycle1, cycle2, cycle3); ++ ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++ ++static int rfbi_find_display(struct omap_display *disp) ++{ ++ if (disp == rfbi.display[0]) ++ return 0; ++ ++ if (disp == rfbi.display[1]) ++ return 1; ++ ++ BUG(); ++ return -1; ++} ++ ++ ++static void signal_fifo_waiters(void) ++{ ++ if (atomic_read(&rfbi.cmd_fifo_full) > 0) { ++ /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */ ++ complete(&rfbi.cmd_done); ++ atomic_dec(&rfbi.cmd_fifo_full); ++ } ++} ++ ++/* returns 1 for async op, and 0 for sync op */ ++static int do_update(struct omap_display *display, struct update_region *upd) ++{ ++ int x = upd->x; ++ int y = upd->y; ++ int w = upd->w; ++ int h = upd->h; ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ /*display->ctrl->enable_te(display, 1); */ ++ ++ dispc_setup_partial_planes(display, &x, &y, &w, &h); ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ rfbi_transfer_area(w, h, NULL, NULL); ++ ++ return 1; ++ } else { ++ struct omap_overlay *ovl; ++ void *addr; ++ int scr_width; ++#ifdef MEASURE_PERF ++ ktime_t t1, t2; ++#endif ++ ovl = &display->manager->overlays[0]; ++ scr_width = ovl->info.screen_width; ++ addr = ovl->info.vaddr; ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++#ifdef MEASURE_PERF ++ t1 = ktime_get(); ++#endif ++ omap_rfbi_write_pixels(addr, scr_width, ++ x, y, w, h); ++#ifdef MEASURE_PERF ++ t2 = ktime_get(); ++ t1 = ktime_sub(t2, t1); ++ DSSDBG("L4 FRAMEDONE in %lld ns\n", ++ ktime_to_ns(t1)); ++#endif ++ return 0; ++ } ++} ++ ++static void process_cmd_fifo(void) ++{ ++ int len; ++ struct update_param p; ++ struct omap_display *display; ++ unsigned long flags; ++ ++ if (atomic_inc_return(&rfbi.cmd_pending) != 1) ++ return; ++ ++ while (true) { ++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); ++ ++ len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, ++ sizeof(struct update_param)); ++ if (len == 0) { ++ DSSDBG("nothing more in fifo\n"); ++ atomic_set(&rfbi.cmd_pending, 0); ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ break; ++ } ++ ++ /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ ++ ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ ++ BUG_ON(len != sizeof(struct update_param)); ++ BUG_ON(p.rfbi_module > 1); ++ ++ display = rfbi.display[p.rfbi_module]; ++ ++ if (p.cmd == RFBI_CMD_UPDATE) { ++ if (do_update(display, &p.par.r)) ++ break; /* async op */ ++ } else if (p.cmd == RFBI_CMD_SYNC) { ++ DSSDBG("Signaling SYNC done!\n"); ++ complete(p.par.sync); ++ } else ++ BUG(); ++ } ++ ++ signal_fifo_waiters(); ++} ++ ++static void rfbi_push_cmd(struct update_param *p) ++{ ++ int ret; ++ ++ while (1) { ++ unsigned long flags; ++ int available; ++ ++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); ++ available = RFBI_CMD_FIFO_LEN_BYTES - ++ __kfifo_len(rfbi.cmd_fifo); ++ ++/* DSSDBG("%d bytes left in fifo\n", available); */ ++ if (available < sizeof(struct update_param)) { ++ DSSDBG("Going to wait because FIFO FULL..\n"); ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ atomic_inc(&rfbi.cmd_fifo_full); ++ wait_for_completion(&rfbi.cmd_done); ++ /*DSSDBG("Woke up because fifo not full anymore\n");*/ ++ continue; ++ } ++ ++ ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, ++ sizeof(struct update_param)); ++/* DSSDBG("pushed %d bytes\n", ret);*/ ++ ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ ++ BUG_ON(ret != sizeof(struct update_param)); ++ ++ break; ++ } ++} ++ ++static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h) ++{ ++ struct update_param p; ++ ++ p.rfbi_module = rfbi_module; ++ p.cmd = RFBI_CMD_UPDATE; ++ ++ p.par.r.x = x; ++ p.par.r.y = y; ++ p.par.r.w = w; ++ p.par.r.h = h; ++ ++ DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h); ++ ++ rfbi_push_cmd(&p); ++ ++ process_cmd_fifo(); ++} ++ ++static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp) ++{ ++ struct update_param p; ++ ++ p.rfbi_module = rfbi_module; ++ p.cmd = RFBI_CMD_SYNC; ++ p.par.sync = sync_comp; ++ ++ rfbi_push_cmd(&p); ++ ++ DSSDBG("RFBI sync pushed to cmd fifo\n"); ++ ++ process_cmd_fifo(); ++} ++ ++int rfbi_init(void) ++{ ++ u32 rev; ++ u32 l; ++ ++ spin_lock_init(&rfbi.cmd_lock); ++ rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, ++ &rfbi.cmd_lock); ++ if (IS_ERR(rfbi.cmd_fifo)) ++ return -ENOMEM; ++ ++ init_completion(&rfbi.cmd_done); ++ atomic_set(&rfbi.cmd_fifo_full, 0); ++ atomic_set(&rfbi.cmd_pending, 0); ++ ++ rfbi.base = ioremap(RFBI_BASE, SZ_256); ++ if (!rfbi.base) { ++ DSSERR("can't ioremap RFBI\n"); ++ return -ENOMEM; ++ } ++ ++ rfbi.dss_ick = get_dss_ick(); ++ rfbi.dss1_fck = get_dss1_fck(); ++ ++ rfbi_enable_clocks(1); ++ ++ msleep(10); ++ ++ rfbi.l4_khz = clk_get_rate(rfbi.dss_ick) / 1000; ++ ++ /* Enable autoidle and smart-idle */ ++ l = rfbi_read_reg(RFBI_SYSCONFIG); ++ l |= (1 << 0) | (2 << 3); ++ rfbi_write_reg(RFBI_SYSCONFIG, l); ++ ++ rev = rfbi_read_reg(RFBI_REVISION); ++ printk(KERN_INFO "OMAP RFBI rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++ ++void rfbi_exit(void) ++{ ++ DSSDBG("rfbi_exit\n"); ++ ++ kfifo_free(rfbi.cmd_fifo); ++ ++ iounmap(rfbi.base); ++} ++ ++/* struct omap_display support */ ++static void rfbi_display_set_mode(struct omap_display *display, ++ int x_res, int y_res, int bpp) ++{ ++ display->bpp = bpp; ++ ++ dispc_set_tft_data_lines(display->bpp); ++ ++ if (rfbi_configure(display->hw_config.u.rfbi.channel, ++ display->bpp, ++ display->hw_config.u.rfbi.data_lines) != 0) { ++ DSSERR("can't configure rfbi\n"); ++ } ++ ++ display->ctrl->set_mode(display, x_res, y_res, bpp); ++} ++ ++ ++static int rfbi_display_update(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ int rfbi_module; ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ rfbi_module = rfbi_find_display(display); ++ ++ rfbi_push_update(rfbi_module, x, y, w, h); ++ ++ return 0; ++} ++ ++static int rfbi_display_sync(struct omap_display *display) ++{ ++ struct completion sync_comp; ++ int rfbi_module; ++ ++ rfbi_module = rfbi_find_display(display); ++ ++ init_completion(&sync_comp); ++ rfbi_push_sync(rfbi_module, &sync_comp); ++ DSSDBG("Waiting for SYNC to happen...\n"); ++ wait_for_completion(&sync_comp); ++ DSSDBG("Released from SYNC\n"); ++ return 0; ++} ++ ++static int rfbi_display_enable_te(struct omap_display *display, int enable) ++{ ++ display->ctrl->enable_te(display, enable); ++ return 0; ++} ++ ++static int rfbi_display_enable(struct omap_display *display) ++{ ++ int r; ++ ++ BUG_ON(display->panel == NULL || display->ctrl == NULL); ++ ++ r = omap_dispc_register_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ if (r) { ++ DSSERR("can't get FRAMEDONE irq\n"); ++ return r; ++ } ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); ++ ++ /* FIX select 16bpp as default */ ++ rfbi_configure(display->hw_config.u.rfbi.channel, ++ 16, ++ display->hw_config.u.rfbi.data_lines); ++ ++ rfbi_set_timings(display->hw_config.u.rfbi.channel, ++ &display->ctrl->timings); ++ ++ display->ctrl->enable(display); ++ ++ return 0; ++} ++ ++static void rfbi_display_disable(struct omap_display *display) ++{ ++ display->ctrl->disable(display); ++ omap_dispc_unregister_isr(framedone_callback); ++} ++ ++void rfbi_init_display(struct omap_display *display) ++{ ++ display->enable = rfbi_display_enable; ++ display->disable = rfbi_display_disable; ++ display->set_mode = rfbi_display_set_mode; ++ display->update = rfbi_display_update; ++ display->sync = rfbi_display_sync; ++ display->enable_te = rfbi_display_enable_te; ++ ++ rfbi.display[display->hw_config.u.rfbi.channel] = display; ++ ++ display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++} +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0006-DSS-TV-out-support-for-OMAP2-3-DSS.patch b/packages/linux/linux-omap/0006-DSS-TV-out-support-for-OMAP2-3-DSS.patch new file mode 100644 index 0000000000..0a28867e98 --- /dev/null +++ b/packages/linux/linux-omap/0006-DSS-TV-out-support-for-OMAP2-3-DSS.patch @@ -0,0 +1,519 @@ +From fc7030b395c21d051de16719751efc75e954c590 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Tue, 4 Nov 2008 16:53:54 +0200 +Subject: [PATCH] DSS: TV-out support for OMAP2/3 DSS + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + arch/arm/plat-omap/dss/venc.c | 499 +++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 499 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/plat-omap/dss/venc.c + +diff --git a/arch/arm/plat-omap/dss/venc.c b/arch/arm/plat-omap/dss/venc.c +new file mode 100644 +index 0000000..a9739ad +--- /dev/null ++++ b/arch/arm/plat-omap/dss/venc.c +@@ -0,0 +1,499 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/venc.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * VENC settings from TI's DSS driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "VENC" ++ ++#include <linux/kernel.h> ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++ ++#include <linux/semaphore.h> ++#include <mach/board.h> ++#include <mach/gpio.h> ++#include <mach/display.h> ++#include <mach/cpu.h> ++ ++#include "dss.h" ++ ++#define VENC_BASE 0x48050C00 ++ ++/* Venc registers */ ++#define VENC_REV_ID 0x00 ++#define VENC_STATUS 0x04 ++#define VENC_F_CONTROL 0x08 ++#define VENC_VIDOUT_CTRL 0x10 ++#define VENC_SYNC_CTRL 0x14 ++#define VENC_LLEN 0x1C ++#define VENC_FLENS 0x20 ++#define VENC_HFLTR_CTRL 0x24 ++#define VENC_CC_CARR_WSS_CARR 0x28 ++#define VENC_C_PHASE 0x2C ++#define VENC_GAIN_U 0x30 ++#define VENC_GAIN_V 0x34 ++#define VENC_GAIN_Y 0x38 ++#define VENC_BLACK_LEVEL 0x3C ++#define VENC_BLANK_LEVEL 0x40 ++#define VENC_X_COLOR 0x44 ++#define VENC_M_CONTROL 0x48 ++#define VENC_BSTAMP_WSS_DATA 0x4C ++#define VENC_S_CARR 0x50 ++#define VENC_LINE21 0x54 ++#define VENC_LN_SEL 0x58 ++#define VENC_L21__WC_CTL 0x5C ++#define VENC_HTRIGGER_VTRIGGER 0x60 ++#define VENC_SAVID__EAVID 0x64 ++#define VENC_FLEN__FAL 0x68 ++#define VENC_LAL__PHASE_RESET 0x6C ++#define VENC_HS_INT_START_STOP_X 0x70 ++#define VENC_HS_EXT_START_STOP_X 0x74 ++#define VENC_VS_INT_START_X 0x78 ++#define VENC_VS_INT_STOP_X__VS_INT_START_Y 0x7C ++#define VENC_VS_INT_STOP_Y__VS_EXT_START_X 0x80 ++#define VENC_VS_EXT_STOP_X__VS_EXT_START_Y 0x84 ++#define VENC_VS_EXT_STOP_Y 0x88 ++#define VENC_AVID_START_STOP_X 0x90 ++#define VENC_AVID_START_STOP_Y 0x94 ++#define VENC_FID_INT_START_X__FID_INT_START_Y 0xA0 ++#define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X 0xA4 ++#define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y 0xA8 ++#define VENC_TVDETGP_INT_START_STOP_X 0xB0 ++#define VENC_TVDETGP_INT_START_STOP_Y 0xB4 ++#define VENC_GEN_CTRL 0xB8 ++#define VENC_OUTPUT_CONTROL 0xC4 ++#define VENC_DAC_B__DAC_C 0xC8 ++ ++static DECLARE_MUTEX(venc_lock); ++ ++struct venc_config { ++ u32 f_control; ++ u32 vidout_ctrl; ++ u32 sync_ctrl; ++ u32 llen; ++ u32 flens; ++ u32 hfltr_ctrl; ++ u32 cc_carr_wss_carr; ++ u32 c_phase; ++ u32 gain_u; ++ u32 gain_v; ++ u32 gain_y; ++ u32 black_level; ++ u32 blank_level; ++ u32 x_color; ++ u32 m_control; ++ u32 bstamp_wss_data; ++ u32 s_carr; ++ u32 line21; ++ u32 ln_sel; ++ u32 l21__wc_ctl; ++ u32 htrigger_vtrigger; ++ u32 savid__eavid; ++ u32 flen__fal; ++ u32 lal__phase_reset; ++ u32 hs_int_start_stop_x; ++ u32 hs_ext_start_stop_x; ++ u32 vs_int_start_x; ++ u32 vs_int_stop_x__vs_int_start_y; ++ u32 vs_int_stop_y__vs_ext_start_x; ++ u32 vs_ext_stop_x__vs_ext_start_y; ++ u32 vs_ext_stop_y; ++ u32 avid_start_stop_x; ++ u32 avid_start_stop_y; ++ u32 fid_int_start_x__fid_int_start_y; ++ u32 fid_int_offset_y__fid_ext_start_x; ++ u32 fid_ext_start_y__fid_ext_offset_y; ++ u32 tvdetgp_int_start_stop_x; ++ u32 tvdetgp_int_start_stop_y; ++ u32 gen_ctrl; ++ ++ int width; ++ int height; ++}; ++ ++/* from TRM */ ++static const struct venc_config venc_config_pal_trm = { ++ .f_control = 0, ++ .vidout_ctrl = 1, ++ .sync_ctrl = 0x40, ++ .llen = 0x35F, /* 863 */ ++ .flens = 0x270, /* 624 */ ++ .hfltr_ctrl = 0, ++ .cc_carr_wss_carr = 0x2F7225ED, ++ .c_phase = 0, ++ .gain_u = 0x111, ++ .gain_v = 0x181, ++ .gain_y = 0x140, ++ .black_level = 0x3B, ++ .blank_level = 0x3B, ++ .x_color = 0x7, ++ .m_control = 0x2, ++ .bstamp_wss_data = 0x3F, ++ .s_carr = 0x2A098ACB, ++ .line21 = 0, ++ .ln_sel = 0x01290015, ++ .l21__wc_ctl = 0x0000F603, ++ .htrigger_vtrigger = 0, ++ ++ .savid__eavid = 0x06A70108, ++ .flen__fal = 0x00180270, ++ .lal__phase_reset = 0x00180270, ++ .hs_int_start_stop_x = 0x00880358, ++ .hs_ext_start_stop_x = 0x000F035F, ++ .vs_int_start_x = 0x01A70000, ++ .vs_int_stop_x__vs_int_start_y = 0x000001A7, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0000, ++ .vs_ext_stop_x__vs_ext_start_y = 0x000101AF, ++ .vs_ext_stop_y = 0x00000025, ++ .avid_start_stop_x = 0x03530083, ++ .avid_start_stop_y = 0x026C002E, ++ .fid_int_start_x__fid_int_start_y = 0x0001008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01380001, ++ ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00FF0000, ++ ++ .width = 720, ++ .height = 574, /* for some reason, this isn't 576 */ ++}; ++ ++/* from TRM */ ++static const struct venc_config venc_config_ntsc_trm = { ++ .f_control = 0, ++ .vidout_ctrl = 1, ++ .sync_ctrl = 0x8040, ++ .llen = 0x359, ++ .flens = 0x20C, ++ .hfltr_ctrl = 0, ++ .cc_carr_wss_carr = 0x043F2631, ++ .c_phase = 0, ++ .gain_u = 0x102, ++ .gain_v = 0x16C, ++ .gain_y = 0x12F, ++ .black_level = 0x43, ++ .blank_level = 0x38, ++ .x_color = 0x7, ++ .m_control = 0x1, ++ .bstamp_wss_data = 0x38, ++ .s_carr = 0x21F07C1F, ++ .line21 = 0, ++ .ln_sel = 0x01310011, ++ .l21__wc_ctl = 0x0000F003, ++ .htrigger_vtrigger = 0, ++ ++ .savid__eavid = 0x069300F4, ++ .flen__fal = 0x0016020C, ++ .lal__phase_reset = 0x00060107, ++ .hs_int_start_stop_x = 0x008E0350, ++ .hs_ext_start_stop_x = 0x000F0359, ++ .vs_int_start_x = 0x01A00000, ++ .vs_int_stop_x__vs_int_start_y = 0x020701A0, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, ++ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, ++ .vs_ext_stop_y = 0x00000006, ++ .avid_start_stop_x = 0x03480078, ++ .avid_start_stop_y = 0x02060024, ++ .fid_int_start_x__fid_int_start_y = 0x0001008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01060006, ++ ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00F90000, ++ ++ .width = 720, ++ .height = 482, ++}; ++ ++static const struct venc_config venc_config_pal_bdghi = { ++ .f_control = 0, ++ .vidout_ctrl = 0, ++ .sync_ctrl = 0, ++ .hfltr_ctrl = 0, ++ .x_color = 0, ++ .line21 = 0, ++ .ln_sel = 21, ++ .htrigger_vtrigger = 0, ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00FB0000, ++ ++ .llen = 864-1, ++ .flens = 625-1, ++ .cc_carr_wss_carr = 0x2F7625ED, ++ .c_phase = 0xDF, ++ .gain_u = 0x111, ++ .gain_v = 0x181, ++ .gain_y = 0x140, ++ .black_level = 0x3e, ++ .blank_level = 0x3e, ++ .m_control = 0<<2 | 1<<1, ++ .bstamp_wss_data = 0x42, ++ .s_carr = 0x2a098acb, ++ .l21__wc_ctl = 0<<13 | 0x16<<8 | 0<<0, ++ .savid__eavid = 0x06A70108, ++ .flen__fal = 23<<16 | 624<<0, ++ .lal__phase_reset = 2<<17 | 310<<0, ++ .hs_int_start_stop_x = 0x00920358, ++ .hs_ext_start_stop_x = 0x000F035F, ++ .vs_int_start_x = 0x1a7<<16, ++ .vs_int_stop_x__vs_int_start_y = 0x000601A7, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0036, ++ .vs_ext_stop_x__vs_ext_start_y = 0x27101af, ++ .vs_ext_stop_y = 0x05, ++ .avid_start_stop_x = 0x03530082, ++ .avid_start_stop_y = 0x0270002E, ++ .fid_int_start_x__fid_int_start_y = 0x0005008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01380005, ++ ++ .width = 720, ++ .height = 576, ++}; ++ ++static struct { ++ void __iomem *base; ++ struct clk *dss_54m_fck; ++ struct clk *dss_96m_fck; ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ const struct venc_config *config; ++} venc; ++ ++static struct omap_panel venc_panel = { ++ .name = "tv-out", ++ .x_res = 0, ++ .y_res = 0, ++ .bpp = 24, ++}; ++ ++static inline void venc_write_reg(int idx, u32 val) ++{ ++ __raw_writel(val, venc.base + idx); ++} ++ ++static inline u32 venc_read_reg(int idx) ++{ ++ u32 l = __raw_readl(venc.base + idx); ++ return l; ++} ++ ++static void venc_write_config(const struct venc_config *config) ++{ ++ DSSDBG("write venc conf\n"); ++ ++ venc_write_reg(VENC_LLEN, config->llen); ++ venc_write_reg(VENC_FLENS, config->flens); ++ venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr); ++ venc_write_reg(VENC_C_PHASE, config->c_phase); ++ venc_write_reg(VENC_GAIN_U, config->gain_u); ++ venc_write_reg(VENC_GAIN_V, config->gain_v); ++ venc_write_reg(VENC_GAIN_Y, config->gain_y); ++ venc_write_reg(VENC_BLACK_LEVEL, config->black_level); ++ venc_write_reg(VENC_BLANK_LEVEL, config->blank_level); ++ venc_write_reg(VENC_M_CONTROL, config->m_control); ++ venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data); ++ venc_write_reg(VENC_S_CARR, config->s_carr); ++ venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl); ++ venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid); ++ venc_write_reg(VENC_FLEN__FAL, config->flen__fal); ++ venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset); ++ venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x); ++ venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x); ++ venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x); ++ venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y, ++ config->vs_int_stop_x__vs_int_start_y); ++ venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X, ++ config->vs_int_stop_y__vs_ext_start_x); ++ venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y, ++ config->vs_ext_stop_x__vs_ext_start_y); ++ venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y); ++ venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x); ++ venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y); ++ venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y, ++ config->fid_int_start_x__fid_int_start_y); ++ venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X, ++ config->fid_int_offset_y__fid_ext_start_x); ++ venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y, ++ config->fid_ext_start_y__fid_ext_offset_y); ++ ++ venc_write_reg(VENC_DAC_B__DAC_C, venc_read_reg(VENC_DAC_B__DAC_C)); ++ venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl); ++ venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl); ++ venc_write_reg(VENC_X_COLOR, config->x_color); ++ venc_write_reg(VENC_LINE21, config->line21); ++ venc_write_reg(VENC_LN_SEL, config->ln_sel); ++ venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger); ++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_X, ++ config->tvdetgp_int_start_stop_x); ++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y, ++ config->tvdetgp_int_start_stop_y); ++ venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl); ++ venc_write_reg(VENC_F_CONTROL, config->f_control); ++ venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl); ++} ++ ++static void venc_reset(void) ++{ ++ int t = 1000; ++ ++ venc_write_reg(VENC_F_CONTROL, venc_read_reg(VENC_F_CONTROL) | (1<<8)); ++ while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) { ++ if (--t == 0) { ++ DSSERR("Failed to reset venc\n"); ++ return; ++ } ++ } ++} ++ ++static void venc_enable_clocks(int enable) ++{ ++ if (enable) { ++ clk_enable(venc.dss_ick); ++ clk_enable(venc.dss1_fck); ++ clk_enable(venc.dss_54m_fck); ++ clk_enable(venc.dss_96m_fck); ++ } else { ++ clk_disable(venc.dss_96m_fck); ++ clk_disable(venc.dss_54m_fck); ++ clk_disable(venc.dss1_fck); ++ clk_disable(venc.dss_ick); ++ } ++} ++ ++int venc_init(void) ++{ ++ u8 rev_id; ++ int use_pal = 1; /* XXX */ ++ ++ if (use_pal) ++ venc.config = &venc_config_pal_trm; ++ else ++ venc.config = &venc_config_ntsc_trm; ++ ++ venc_panel.x_res = venc.config->width; ++ venc_panel.y_res = venc.config->height; ++ ++ venc.base = ioremap(VENC_BASE, SZ_1K); ++ if (!venc.base) { ++ DSSERR("can't ioremap VENC\n"); ++ return -ENOMEM; ++ } ++ ++ venc.dss_ick = get_dss_ick(); ++ venc.dss1_fck = get_dss1_fck(); ++ venc.dss_54m_fck = get_tv_fck(); ++ venc.dss_96m_fck = get_96m_fck(); ++ ++ /* enable clocks */ ++ venc_enable_clocks(1); ++ ++ /* configure venc */ ++ venc_reset(); ++ venc_write_config(venc.config); ++ ++ rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff); ++ printk(KERN_INFO "OMAP VENC rev %d\n", rev_id); ++ ++ venc_enable_clocks(0); ++ ++ return 0; ++} ++ ++void venc_exit(void) ++{ ++ iounmap(venc.base); ++} ++ ++static int venc_enable_display(struct omap_display *display) ++{ ++ DSSDBG("venc_enable_display\n"); ++ ++ down(&venc_lock); ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ up(&venc_lock); ++ return -EINVAL; ++ } ++ ++ venc_enable_clocks(1); ++ ++ dss_set_venc_output(display->hw_config.u.venc.type); ++ dss_set_dac_pwrdn_bgz(1); ++ ++ venc_write_config(venc.config); ++ ++ if (display->hw_config.u.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE) { ++ if (cpu_is_omap24xx()) ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0x2); ++ else ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0xa); ++ } else { /* S-Video */ ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0xd); ++ } ++ ++ dispc_set_digit_size(venc.config->width, venc.config->height/2); ++ ++ if (display->hw_config.panel_enable) ++ display->hw_config.panel_enable(display); ++ ++ dispc_enable_digit_out(1); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ up(&venc_lock); ++ ++ return 0; ++} ++ ++static void venc_disable_display(struct omap_display *display) ++{ ++ DSSDBG("venc_disable_display\n"); ++ ++ down(&venc_lock); ++ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) { ++ up(&venc_lock); ++ return; ++ } ++ ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0); ++ dss_set_dac_pwrdn_bgz(0); ++ ++ dispc_enable_digit_out(0); ++ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ ++ venc_enable_clocks(0); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++ ++ up(&venc_lock); ++} ++ ++void venc_init_display(struct omap_display *display) ++{ ++ display->panel = &venc_panel; ++ display->enable = venc_enable_display; ++ display->disable = venc_disable_display; ++} +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0007-DSS-DSI-support-for-OMAP2-3-DSS.patch b/packages/linux/linux-omap/0007-DSS-DSI-support-for-OMAP2-3-DSS.patch new file mode 100644 index 0000000000..e1c92b289a --- /dev/null +++ b/packages/linux/linux-omap/0007-DSS-DSI-support-for-OMAP2-3-DSS.patch @@ -0,0 +1,3047 @@ +From 421c7dc28a0b9b2ee0c8514045a8ee1af7b002de Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Tue, 4 Nov 2008 15:18:25 +0200 +Subject: [PATCH] DSS: DSI support for OMAP2/3 DSS + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + arch/arm/plat-omap/dss/dsi.c | 3027 ++++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 3027 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/plat-omap/dss/dsi.c + +diff --git a/arch/arm/plat-omap/dss/dsi.c b/arch/arm/plat-omap/dss/dsi.c +new file mode 100644 +index 0000000..47e5628 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dsi.c +@@ -0,0 +1,3027 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dsi.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DSI" ++ ++#include <linux/kernel.h> ++#include <linux/io.h> ++#include <linux/clk.h> ++#include <linux/device.h> ++#include <linux/err.h> ++#include <linux/interrupt.h> ++#include <linux/delay.h> ++#include <linux/workqueue.h> ++#include <linux/mutex.h> ++ ++#include <mach/board.h> ++#include <mach/display.h> ++ ++#include "dss.h" ++ ++/*#define VERBOSE*/ ++/*#define VERBOSE_IRQ*/ ++/*#define MEASURE_PERF*/ ++ ++#define DSI_BASE 0x4804FC00 ++ ++struct dsi_reg { u16 idx; }; ++ ++#define DSI_REG(idx) ((const struct dsi_reg) { idx }) ++ ++/* DSI Protocol Engine */ ++ ++#define DSI_REVISION DSI_REG(0x0000) ++#define DSI_SYSCONFIG DSI_REG(0x0010) ++#define DSI_SYSSTATUS DSI_REG(0x0014) ++#define DSI_IRQSTATUS DSI_REG(0x0018) ++#define DSI_IRQENABLE DSI_REG(0x001C) ++#define DSI_CTRL DSI_REG(0x0040) ++#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) ++#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) ++#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) ++#define DSI_CLK_CTRL DSI_REG(0x0054) ++#define DSI_TIMING1 DSI_REG(0x0058) ++#define DSI_TIMING2 DSI_REG(0x005C) ++#define DSI_VM_TIMING1 DSI_REG(0x0060) ++#define DSI_VM_TIMING2 DSI_REG(0x0064) ++#define DSI_VM_TIMING3 DSI_REG(0x0068) ++#define DSI_CLK_TIMING DSI_REG(0x006C) ++#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) ++#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) ++#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) ++#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) ++#define DSI_VM_TIMING4 DSI_REG(0x0080) ++#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) ++#define DSI_VM_TIMING5 DSI_REG(0x0088) ++#define DSI_VM_TIMING6 DSI_REG(0x008C) ++#define DSI_VM_TIMING7 DSI_REG(0x0090) ++#define DSI_STOPCLK_TIMING DSI_REG(0x0094) ++#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) ++#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) ++#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) ++#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) ++#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) ++#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) ++#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) ++ ++/* DSIPHY_SCP */ ++ ++#define DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) ++#define DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) ++#define DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) ++#define DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) ++ ++/* DSI_PLL_CTRL_SCP */ ++ ++#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) ++#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) ++#define DSI_PLL_GO DSI_REG(0x300 + 0x0008) ++#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) ++#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dsi_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) ++ ++/* Global interrupts */ ++#define DSI_IRQ_VC0 (1 << 0) ++#define DSI_IRQ_VC1 (1 << 1) ++#define DSI_IRQ_VC2 (1 << 2) ++#define DSI_IRQ_VC3 (1 << 3) ++#define DSI_IRQ_WAKEUP (1 << 4) ++#define DSI_IRQ_RESYNC (1 << 5) ++#define DSI_IRQ_PLL_LOCK (1 << 7) ++#define DSI_IRQ_PLL_UNLOCK (1 << 8) ++#define DSI_IRQ_PLL_RECALL (1 << 9) ++#define DSI_IRQ_COMPLEXIO_ERR (1 << 10) ++#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) ++#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) ++#define DSI_IRQ_TE_TRIGGER (1 << 16) ++#define DSI_IRQ_ACK_TRIGGER (1 << 17) ++#define DSI_IRQ_SYNC_LOST (1 << 18) ++#define DSI_IRQ_LDO_POWER_GOOD (1 << 19) ++#define DSI_IRQ_TA_TIMEOUT (1 << 20) ++#define DSI_IRQ_ERROR_MASK \ ++ (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ ++ DSI_IRQ_TA_TIMEOUT) ++#define DSI_IRQ_CHANNEL_MASK 0xf ++ ++/* Virtual channel interrupts */ ++#define DSI_VC_IRQ_CS (1 << 0) ++#define DSI_VC_IRQ_ECC_CORR (1 << 1) ++#define DSI_VC_IRQ_PACKET_SENT (1 << 2) ++#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) ++#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) ++#define DSI_VC_IRQ_BTA (1 << 5) ++#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) ++#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) ++#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) ++#define DSI_VC_IRQ_ERROR_MASK \ ++ (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ ++ DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ ++ DSI_VC_IRQ_FIFO_TX_UDF) ++ ++/* ComplexIO interrupts */ ++#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) ++#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) ++#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) ++#define DSI_CIO_IRQ_ERRESC1 (1 << 5) ++#define DSI_CIO_IRQ_ERRESC2 (1 << 6) ++#define DSI_CIO_IRQ_ERRESC3 (1 << 7) ++#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) ++#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) ++#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) ++#define DSI_CIO_IRQ_STATEULPS1 (1 << 15) ++#define DSI_CIO_IRQ_STATEULPS2 (1 << 16) ++#define DSI_CIO_IRQ_STATEULPS3 (1 << 17) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) ++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) ++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) ++ ++#define DSI_DT_DCS_SHORT_WRITE_0 0x05 ++#define DSI_DT_DCS_SHORT_WRITE_1 0x15 ++#define DSI_DT_DCS_READ 0x06 ++#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 ++#define DSI_DT_NULL_PACKET 0x09 ++#define DSI_DT_DCS_LONG_WRITE 0x39 ++ ++#define DSI_DT_RX_ACK_WITH_ERR 0x02 ++#define DSI_DT_RX_DCS_LONG_READ 0x1c ++#define DSI_DT_RX_SHORT_READ_1 0x21 ++#define DSI_DT_RX_SHORT_READ_2 0x22 ++ ++#define FINT_MAX 2100000 ++#define FINT_MIN 750000 ++#define REGN_MAX (1 << 7) ++#define REGM_MAX ((1 << 11) - 1) ++#define REGM3_MAX (1 << 4) ++#define REGM4_MAX (1 << 4) ++ ++enum fifo_size { ++ DSI_FIFO_SIZE_0 = 0, ++ DSI_FIFO_SIZE_32 = 1, ++ DSI_FIFO_SIZE_64 = 2, ++ DSI_FIFO_SIZE_96 = 3, ++ DSI_FIFO_SIZE_128 = 4, ++}; ++ ++static struct ++{ ++ void __iomem *base; ++ ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ struct clk *dss2_fck; ++ ++ unsigned long dsi1_pll_fclk; /* Hz */ ++ unsigned long dsi2_pll_fclk; /* Hz */ ++ unsigned long dsiphy; /* Hz */ ++ unsigned long ddr_clk; /* Hz */ ++ ++ struct { ++ enum fifo_size fifo_size; ++ int dest_per; /* destination peripheral 0-3 */ ++ } vc[4]; ++ ++ struct mutex lock; ++ ++ struct completion bta_completion; ++ ++ spinlock_t update_lock; ++ int update_ongoing; ++ int update_syncers; ++ struct completion update_completion; ++ struct work_struct framedone_work; ++ ++ enum omap_dss_update_mode update_mode; ++ int use_te; ++ int framedone_scheduled; /* helps to catch strange framedone bugs */ ++ ++ struct { ++ struct omap_display *display; ++ int x, y, w, h; ++ int bytespp; ++ } update_region; ++ ++#ifdef MEASURE_PERF ++ ktime_t measure_time; ++ int measure_frames; ++#endif ++} dsi; ++ ++ ++static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) ++{ ++ __raw_writel(val, dsi.base + idx.idx); ++} ++ ++static inline u32 dsi_read_reg(const struct dsi_reg idx) ++{ ++ return __raw_readl(dsi.base + idx.idx); ++} ++ ++static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, ++ int value) ++{ ++ int t = 1000; ++ ++ while (REG_GET(idx, bitnum, bitnum) != value) { ++ if (--t == 0) ++ return !value; ++ } ++ ++ return value; ++} ++ ++ ++#ifdef MEASURE_PERF ++static void start_measuring(void) ++{ ++ dsi.measure_time = ktime_get(); ++} ++ ++static void end_measuring(const char *name) ++{ ++ ktime_t t; ++ u32 total_bytes; ++ u32 us; ++ const int numframes = 100; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) ++ return; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { ++ dsi.measure_frames++; ++ if (dsi.measure_frames < numframes) ++ return; ++ dsi.measure_frames = 0; ++ } ++ ++ t = ktime_get(); ++ t = ktime_sub(t, dsi.measure_time); ++ us = (u32)ktime_to_us(t); ++ if (us == 0) ++ us = 1; ++ ++ total_bytes = dsi.update_region.w * ++ dsi.update_region.h * ++ dsi.update_region.bytespp; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { ++ DSSINFO("%s update: %d frames in %u us, %u frames/sec\n", ++ name, numframes, ++ us, ++ 1000*1000 / us); ++ } else { ++ DSSINFO("%s update in %u us (%u Hz), %u bytes, %u kbytes/sec\n", ++ name, ++ us, ++ 1000*1000 / us, ++ total_bytes, ++ total_bytes * 1000 / us); ++ } ++} ++#else ++#define start_measuring() ++#define end_measuring(x) ++#endif ++ ++ ++ ++ ++static void print_irq_status(u32 status) ++{ ++#ifndef VERBOSE_IRQ ++ if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) ++ return; ++#endif ++ printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DSI_IRQ_##x) \ ++ printk(#x " "); ++#ifdef VERBOSE_IRQ ++ PIS(VC0); ++ PIS(VC1); ++ PIS(VC2); ++ PIS(VC3); ++#endif ++ PIS(WAKEUP); ++ PIS(RESYNC); ++ PIS(PLL_LOCK); ++ PIS(PLL_UNLOCK); ++ PIS(PLL_RECALL); ++ PIS(COMPLEXIO_ERR); ++ PIS(HS_TX_TIMEOUT); ++ PIS(LP_RX_TIMEOUT); ++ PIS(TE_TRIGGER); ++ PIS(ACK_TRIGGER); ++ PIS(SYNC_LOST); ++ PIS(LDO_POWER_GOOD); ++ PIS(TA_TIMEOUT); ++#undef PIS ++ ++ printk("\n"); ++} ++ ++static void print_irq_status_vc(int channel, u32 status) ++{ ++#ifndef VERBOSE_IRQ ++ if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) ++ return; ++#endif ++ printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); ++ ++#define PIS(x) \ ++ if (status & DSI_VC_IRQ_##x) \ ++ printk(#x " "); ++ PIS(CS); ++ PIS(ECC_CORR); ++#ifdef VERBOSE_IRQ ++ PIS(PACKET_SENT); ++#endif ++ PIS(FIFO_TX_OVF); ++ PIS(FIFO_RX_OVF); ++ PIS(BTA); ++ PIS(ECC_NO_CORR); ++ PIS(FIFO_TX_UDF); ++ PIS(PP_BUSY_CHANGE); ++#undef PIS ++ printk("\n"); ++} ++ ++static void print_irq_status_cio(u32 status) ++{ ++ printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DSI_CIO_IRQ_##x) \ ++ printk(#x " "); ++ PIS(ERRSYNCESC1); ++ PIS(ERRSYNCESC2); ++ PIS(ERRSYNCESC3); ++ PIS(ERRESC1); ++ PIS(ERRESC2); ++ PIS(ERRESC3); ++ PIS(ERRCONTROL1); ++ PIS(ERRCONTROL2); ++ PIS(ERRCONTROL3); ++ PIS(STATEULPS1); ++ PIS(STATEULPS2); ++ PIS(STATEULPS3); ++ PIS(ERRCONTENTIONLP0_1); ++ PIS(ERRCONTENTIONLP1_1); ++ PIS(ERRCONTENTIONLP0_2); ++ PIS(ERRCONTENTIONLP1_2); ++ PIS(ERRCONTENTIONLP0_3); ++ PIS(ERRCONTENTIONLP1_3); ++ PIS(ULPSACTIVENOT_ALL0); ++ PIS(ULPSACTIVENOT_ALL1); ++#undef PIS ++ ++ printk("\n"); ++} ++ ++static int debug_irq; ++ ++/* called from dss */ ++void dsi_irq_handler(void) ++{ ++ u32 irqstatus, vcstatus, ciostatus; ++ int i; ++ ++ irqstatus = dsi_read_reg(DSI_IRQSTATUS); ++ ++ if (irqstatus & DSI_IRQ_ERROR_MASK) { ++ DSSERR("DSI error, irqstatus %x\n", irqstatus); ++ print_irq_status(irqstatus); ++ } else if (debug_irq) { ++ print_irq_status(irqstatus); ++ } ++ ++ for (i = 0; i < 4; ++i) { ++ if ((irqstatus & (1<<i)) == 0) ++ continue; ++ ++ vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i)); ++ ++ if (vcstatus & DSI_VC_IRQ_BTA) ++ complete(&dsi.bta_completion); ++ ++ if (vcstatus & DSI_VC_IRQ_ERROR_MASK) { ++ DSSERR("DSI VC(%d) error, vc irqstatus %x\n", ++ i, vcstatus); ++ print_irq_status_vc(i, vcstatus); ++ } else if (debug_irq) { ++ print_irq_status_vc(i, vcstatus); ++ } ++ ++ dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus); ++ } ++ ++ if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) { ++ ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); ++ ++ dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus); ++ ++ DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); ++ print_irq_status_cio(ciostatus); ++ } ++ ++ dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); ++} ++ ++ ++static void _dsi_initialize_irq(void) ++{ ++ u32 l; ++ int i; ++ ++ /* disable all interrupts */ ++ dsi_write_reg(DSI_IRQENABLE, 0); ++ for (i = 0; i < 4; ++i) ++ dsi_write_reg(DSI_VC_IRQENABLE(i), 0); ++ dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0); ++ ++ /* clear interrupt status */ ++ l = dsi_read_reg(DSI_IRQSTATUS); ++ dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK); ++ ++ for (i = 0; i < 4; ++i) { ++ l = dsi_read_reg(DSI_VC_IRQSTATUS(i)); ++ dsi_write_reg(DSI_VC_IRQSTATUS(i), l); ++ } ++ ++ l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); ++ dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l); ++ ++ /* enable error irqs */ ++ l = DSI_IRQ_ERROR_MASK; ++ dsi_write_reg(DSI_IRQENABLE, l); ++ ++ l = DSI_VC_IRQ_ERROR_MASK; ++ for (i = 0; i < 4; ++i) ++ dsi_write_reg(DSI_VC_IRQENABLE(i), l); ++ ++ /* XXX zonda responds incorrectly, causing control error: ++ Exit from LP-ESC mode to LP11 uses wrong transition states on the ++ data lines LP0 and LN0. */ ++ dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, ++ -1 & (~DSI_CIO_IRQ_ERRCONTROL2)); ++} ++ ++static void dsi_vc_enable_bta_irq(int channel) ++{ ++ u32 l; ++ ++ l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); ++ l |= DSI_VC_IRQ_BTA; ++ dsi_write_reg(DSI_VC_IRQENABLE(channel), l); ++} ++ ++static void dsi_vc_disable_bta_irq(int channel) ++{ ++ u32 l; ++ ++ l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); ++ l &= ~DSI_VC_IRQ_BTA; ++ dsi_write_reg(DSI_VC_IRQENABLE(channel), l); ++} ++ ++/* DSI func clock. this could also be DSI2_PLL_FCLK */ ++static inline void enable_clocks(int enable) ++{ ++ if (enable) { ++ clk_enable(dsi.dss_ick); ++ clk_enable(dsi.dss1_fck); ++ } else { ++ clk_disable(dsi.dss1_fck); ++ clk_disable(dsi.dss_ick); ++ } ++} ++ ++/* source clock for DSI PLL. this could also be PCLKFREE */ ++static inline void dsi_enable_pll_clock(int enable) ++{ ++ if (enable) ++ clk_enable(dsi.dss2_fck); ++ else ++ clk_disable(dsi.dss2_fck); ++} ++ ++#if 1 ++ ++#ifdef DEBUG ++static void _dsi_print_reset_status(void) ++{ ++ u32 l; ++ ++ /* A dummy read using the SCP interface to any DSIPHY register is ++ * required after DSIPHY reset to complete the reset of the DSI complex ++ * I/O. */ ++ l = dsi_read_reg(DSIPHY_CFG5); ++ ++ printk(KERN_DEBUG "DSI resets: "); ++ ++ l = dsi_read_reg(DSI_PLL_STATUS); ++ printk("PLL (%d) ", FLD_GET(l, 0, 0)); ++ ++ l = dsi_read_reg(DSI_COMPLEXIO_CFG1); ++ printk("CIO (%d) ", FLD_GET(l, 29, 29)); ++ ++ l = dsi_read_reg(DSIPHY_CFG5); ++ printk("PHY (%x, %d, %d, %d)\n", ++ FLD_GET(l, 28, 26), ++ FLD_GET(l, 29, 29), ++ FLD_GET(l, 30, 30), ++ FLD_GET(l, 31, 31)); ++} ++#else ++#define _dsi_print_reset_status() ++#endif ++ ++static int _dsi_reset(void) ++{ ++ int r = 0; ++ ++ /* Soft reset */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1); ++ ++ if (wait_for_bit_change(DSI_SYSSTATUS, 0, 1) != 1) { ++ DSSERR("soft reset failed\n"); ++ r = -ENODEV; ++ } ++ ++ /* A dummy read using the SCP interface to any DSIPHY register is ++ * required after DSIPHY reset to complete the reset of the DSI complex ++ * I/O. */ ++ dsi_read_reg(DSIPHY_CFG5); ++ ++ _dsi_print_reset_status(); ++ ++ return r; ++} ++#endif ++ ++static inline int dsi_if_enable(int enable) ++{ ++ DSSDBG("dsi_if_enable(%d)\n", enable); ++ ++ enable = enable ? 1 : 0; ++ REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */ ++ ++ if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) { ++ DSSERR("Failed to set dsi_if_enable to %d\n", enable); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static unsigned long dsi_fclk_rate(void) ++{ ++ unsigned long r; ++ ++ if (dss_get_dsi_clk_source() == 0) { ++ /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */ ++ r = clk_get_rate(dsi.dss1_fck); ++ } else { ++ /* DSI FCLK source is DSI2_PLL_FCLK */ ++ r = dsi.dsi2_pll_fclk; ++ } ++ ++ return r; ++} ++ ++static int dsi_set_lp_clk_divisor(void) ++{ ++ int n; ++ unsigned long dsi_fclk; ++ unsigned long mhz; ++ ++ /* LP_CLK_DIVISOR, DSI fclk/n, should be 20MHz - 32kHz */ ++ ++ dsi_fclk = dsi_fclk_rate(); ++ ++ for (n = 1; n < (1 << 13) - 1; ++n) { ++ mhz = dsi_fclk / n; ++ if (mhz <= 20*1000*1000) ++ break; ++ } ++ ++ if (n == (1 << 13) - 1) { ++ DSSERR("DSI: Failed to find LP_CLK_DIVISOR\n"); ++ return -EINVAL; ++ } ++ ++ DSSDBG("LP_CLK_DIV %d, LP_CLK %ld\n", n, mhz); ++ ++ REG_FLD_MOD(DSI_CLK_CTRL, n, 12, 0); /* LP_CLK_DIVISOR */ ++ if (dsi_fclk > 30*1000*1000) ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 21, 21); /* LP_RX_SYNCHRO_ENABLE */ ++ ++ return 0; ++} ++ ++ ++enum dsi_pll_power_state { ++ DSI_PLL_POWER_OFF = 0x0, ++ DSI_PLL_POWER_ON_HSCLK = 0x1, ++ DSI_PLL_POWER_ON_ALL = 0x2, ++ DSI_PLL_POWER_ON_DIV = 0x3, ++}; ++ ++static int dsi_pll_power(enum dsi_pll_power_state state) ++{ ++ int t = 0; ++ ++ REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ ++ ++ /* PLL_PWR_STATUS */ ++ while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { ++ udelay(1); ++ if (t++ > 1000) { ++ DSSERR("DSI: Failed to set DSI PLL power mode to %d\n", ++ state); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++/* return 1 for exact match */ ++static int iterate_dispc_divs(int is_tft, unsigned long pck, ++ struct dsi_clock_info *cur, struct dsi_clock_info *best) ++{ ++ int pcd_min = is_tft ? 2 : 3; ++ ++ for (cur->lck_div = 1; cur->lck_div <= 255; ++cur->lck_div) { ++ unsigned long lck = cur->dispc_fck / cur->lck_div; ++ ++ for (cur->pck_div = pcd_min; cur->pck_div <= 255; ++ ++cur->pck_div) { ++ ++ cur->pck = lck / cur->pck_div; ++ ++ if (abs(cur->pck - pck) < abs(best->pck - pck)) { ++ *best = *cur; ++ /* ++ DSSDBG("best match fck %ld, pck %ld, regn %d, " ++ "regm %d, regm3 %d, ld %d, pd %d\n", ++ best->dispc_fck, ++ best->pck, ++ best->regn, best->regm, ++ best->regm3, ++ best->lck_div, best->pck_div); ++ */ ++ } ++ ++ if (cur->pck == pck) ++ return 1; ++ ++ if (cur->pck < pck) ++ break; ++ } ++ ++ if (lck / pcd_min < cur->pck) ++ break; ++ } ++ ++ return 0; ++} ++ ++int dsi_pll_calc_pck(int is_tft, unsigned long pck, ++ struct dsi_clock_info *cinfo) ++{ ++ struct dsi_clock_info cur, best; ++ ++ DSSDBG("dsi_pll_calc\n"); ++ ++ memset(&best, 0, sizeof(best)); ++ ++ memset(&cur, 0, sizeof(cur)); ++ cur.clkin = clk_get_rate(dsi.dss2_fck); ++ cur.use_dss2_fck = 1; ++ cur.highfreq = 0; ++ ++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ ++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ ++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ ++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { ++ if (cur.highfreq == 0) ++ cur.fint = cur.clkin / cur.regn; ++ else ++ cur.fint = cur.clkin / (2 * cur.regn); ++ ++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) ++ continue; ++ ++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ ++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { ++ unsigned long a, b; ++ ++ a = 2 * cur.regm * (cur.clkin/1000); ++ b = cur.regn * (cur.highfreq + 1); ++ cur.dsiphy = a / b * 1000; ++ ++ if (cur.dsiphy > 1800 * 1000 * 1000) ++ break; ++ ++ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ ++ for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; ++ ++cur.regm3) { ++ int r; ++ ++ cur.dispc_fck = cur.dsiphy / cur.regm3; ++ ++ /* this will narrow down the search a bit, ++ * but still give pixclocks below what was ++ * requested */ ++ if (cur.dispc_fck < pck) ++ break; ++ ++ if (cur.dispc_fck > DISPC_MAX_FCK) ++ continue; ++ ++#ifdef CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK ++ if (cur.dispc_fck < ++ pck * CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK) ++ continue; ++#endif ++ r = iterate_dispc_divs(is_tft, pck, ++ &cur, &best); ++ if (r == 1) ++ goto found; ++ ++ } ++ } ++ } ++found: ++ ++ /* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4 < 173MHz */ ++ /* hardcoded 48MHz for now. what should it be? */ ++ best.regm4 = best.dsiphy / (48000000); ++ if (best.regm4 > REGM4_MAX) ++ best.regm4 = REGM4_MAX; ++ best.dsi_fck = best.dsiphy / best.regm4; ++ ++ *cinfo = best; ++ ++ return 0; ++} ++ ++static int dsi_pll_calc_datafreq(unsigned long datafreq, ++ struct dsi_clock_info *cinfo) ++{ ++ struct dsi_clock_info cur, best; ++ const int use_dss2_fck = 1; ++ ++ DSSDBG("dsi_pll_calc_datarate\n"); ++ ++ memset(&best, 0, sizeof(best)); ++ ++ memset(&cur, 0, sizeof(cur)); ++ cur.use_dss2_fck = use_dss2_fck; ++ if (use_dss2_fck) { ++ cur.clkin = clk_get_rate(dsi.dss2_fck); ++ cur.highfreq = 0; ++ } else { ++ cur.clkin = dispc_pclk_rate(); ++ if (cur.clkin < 32000000) ++ cur.highfreq = 0; ++ else ++ cur.highfreq = 1; ++ } ++ ++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ ++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ ++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ ++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { ++ if (cur.highfreq == 0) ++ cur.fint = cur.clkin / cur.regn; ++ else ++ cur.fint = cur.clkin / (2 * cur.regn); ++ ++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) ++ continue; ++ ++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ ++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { ++ unsigned long a, b; ++ ++ a = 2 * cur.regm * (cur.clkin/1000); ++ b = cur.regn * (cur.highfreq + 1); ++ cur.dsiphy = a / b * 1000; ++ ++ if (cur.dsiphy > 1800 * 1000 * 1000) ++ break; ++ ++ if (abs(cur.dsiphy - datafreq) < ++ abs(best.dsiphy - datafreq)) { ++ best = cur; ++ /* DSSDBG("best %ld\n", best.dsiphy); */ ++ } ++ ++ if (cur.dsiphy == datafreq) ++ goto found; ++ } ++ } ++found: ++ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ ++ /* hardcoded 48MHz for now. what should it be? */ ++ best.regm3 = best.dsiphy / (48000000); ++ if (best.regm3 > REGM3_MAX) ++ best.regm3 = REGM3_MAX; ++ best.dispc_fck = best.dsiphy / best.regm3; ++ ++ /* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4 < 173MHz */ ++ /* hardcoded 48MHz for now. what should it be? */ ++ best.regm4 = best.dsiphy / (48000000); ++ if (best.regm4 > REGM4_MAX) ++ best.regm4 = REGM4_MAX; ++ best.dsi_fck = best.dsiphy / best.regm4; ++ ++ *cinfo = best; ++ ++ return 0; ++} ++ ++int dsi_pll_program(struct dsi_clock_info *cinfo) ++{ ++ int r = 0; ++ u32 l; ++ ++ DSSDBG("dsi_pll_program\n"); ++ ++ enable_clocks(1); ++ ++ dsi.dsiphy = cinfo->dsiphy; ++ dsi.ddr_clk = dsi.dsiphy / 4; ++ dsi.dsi1_pll_fclk = cinfo->dispc_fck; ++ dsi.dsi2_pll_fclk = cinfo->dsi_fck; ++ ++ DSSDBG("DSI Fint %ld\n", cinfo->fint); ++ ++ DSSDBG("clkin (%s) rate %ld, highfreq %d\n", ++ cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", ++ cinfo->clkin, ++ cinfo->highfreq); ++ ++ /* DSIPHY == CLKIN4DDR */ ++ DSSDBG("DSIPHY = 2 * %d / %d * %lu / %d = %lu\n", ++ cinfo->regm, ++ cinfo->regn, ++ cinfo->clkin, ++ cinfo->highfreq + 1, ++ cinfo->dsiphy); ++ ++ DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", ++ dsi.dsiphy / 1000 / 1000 / 2); ++ ++ DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk); ++ ++ DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", ++ cinfo->regm3, cinfo->dispc_fck); ++ DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", ++ cinfo->regm4, cinfo->dsi_fck); ++ ++ REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION1); ++ l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ ++ l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ ++ l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ ++ l = FLD_MOD(l, cinfo->regm3 - 1, 22, 19); /* DSI_CLOCK_DIV */ ++ l = FLD_MOD(l, cinfo->regm4 - 1, 26, 23); /* DSIPROTO_CLOCK_DIV */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION1, l); ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); ++ l = FLD_MOD(l, 7, 4, 1); /* DSI_PLL_FREQSEL */ ++ /* DSI_PLL_CLKSEL */ ++ l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, 11, 11); ++ l = FLD_MOD(l, cinfo->highfreq, 12, 12); /* DSI_PLL_HIGHFREQ */ ++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ ++ l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ ++ l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); ++ ++ REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ ++ ++ if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { ++ DSSERR("dsi pll go bit not going down.\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { ++ DSSERR("DSI: cannot lock PLL\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); ++ l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ ++ l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ ++ l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ ++ l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ ++ l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ ++ l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ ++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ ++ l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ ++ l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ ++ l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ ++ l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ ++ l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ ++ l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ ++ l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); ++ ++ DSSDBG("PLL config done\n"); ++err: ++ enable_clocks(0); ++ ++ return r; ++} ++ ++int dsi_pll_init(int enable_hsclk, int enable_hsdiv) ++{ ++ int r = 0; ++ int fck_div, lck_div, pck_div; ++ unsigned long fck; ++ enum dsi_pll_power_state pwstate; ++ ++ DSSDBG("PLL init\n"); ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ /* configure dispc fck and pixel clock to something sane */ ++ fck = dispc_calc_clock_div(1, 48 * 1000 * 1000, ++ &fck_div, &lck_div, &pck_div); ++ if (fck == 0) ++ return -EINVAL; ++ ++ dispc_set_clock_div(fck_div, lck_div, pck_div); ++ ++ /* PLL does not come out of reset without this... */ ++ dispc_pck_free_enable(1); ++ ++ if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { ++ DSSERR("DSI: PLL not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ /* ... but if left on, we get problems when planes do not ++ * fill the whole display. No idea about this XXX */ ++ dispc_pck_free_enable(0); ++ ++ if (enable_hsclk && enable_hsdiv) ++ pwstate = DSI_PLL_POWER_ON_ALL; ++ else if (enable_hsclk) ++ pwstate = DSI_PLL_POWER_ON_HSCLK; ++ else if (enable_hsdiv) ++ pwstate = DSI_PLL_POWER_ON_DIV; ++ else ++ pwstate = DSI_PLL_POWER_OFF; ++ ++ r = dsi_pll_power(pwstate); ++ ++ if (r) ++ goto err; ++ ++ enable_clocks(0); ++ ++ DSSDBG("PLL init done\n"); ++ ++ return 0; ++err: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ return r; ++} ++ ++void dsi_pll_uninit(void) ++{ ++ dsi_pll_power(DSI_PLL_POWER_OFF); ++ dsi_enable_pll_clock(0); ++ DSSDBG("PLL uninit done\n"); ++} ++ ++unsigned long dsi_get_dsi1_pll_rate(void) ++{ ++ return dsi.dsi1_pll_fclk; ++} ++ ++unsigned long dsi_get_dsi2_pll_rate(void) ++{ ++ return dsi.dsi2_pll_fclk; ++} ++ ++ssize_t dsi_print_clocks(char *buf, ssize_t size) ++{ ++ ssize_t l = 0; ++ int clksel; ++ ++ enable_clocks(1); ++ ++ clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); ++ ++ l += snprintf(buf + l, size - l, "- dsi -\n"); ++ ++ l += snprintf(buf + l, size - l, "dsi fclk source = %s\n", ++ dss_get_dsi_clk_source() == 0 ? ++ "dss1_alwon_fclk" : "dsi2_pll_fclk"); ++ ++ l += snprintf(buf + l, size - l, "dsi pll source = %s\n", ++ clksel == 0 ? ++ "dss2_alwon_fclk" : "pclkfree"); ++ ++ l += snprintf(buf + l, size - l, ++ "DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n", ++ dsi.dsiphy, dsi.ddr_clk); ++ ++ l += snprintf(buf + l, size - l, ++ "dsi1_pll_fck\t%lu (%s)\n" ++ "dsi2_pll_fck\t%lu (%s)\n", ++ dsi.dsi1_pll_fclk, ++ dss_get_dispc_clk_source() == 0 ? "off" : "on", ++ dsi.dsi2_pll_fclk, ++ dss_get_dsi_clk_source() == 0 ? "off" : "on"); ++ ++ enable_clocks(0); ++ ++ return l; ++} ++ ++ ++enum dsi_complexio_power_state { ++ DSI_COMPLEXIO_POWER_OFF = 0x0, ++ DSI_COMPLEXIO_POWER_ON = 0x1, ++ DSI_COMPLEXIO_POWER_ULPS = 0x2, ++}; ++ ++static int dsi_complexio_power(enum dsi_complexio_power_state state) ++{ ++ int t = 0; ++ ++ /* PWR_CMD */ ++ REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); ++ ++ /* PWR_STATUS */ ++ while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { ++ udelay(1); ++ if (t++ > 1000) { ++ DSSERR("DSI: failed to set complexio power state to " ++ "%d\n", state); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static void dsi_complexio_config(struct omap_display *display) ++{ ++ u32 r; ++ ++ int clk_lane = display->hw_config.u.dsi.clk_lane; ++ int data1_lane = display->hw_config.u.dsi.data1_lane; ++ int data2_lane = display->hw_config.u.dsi.data2_lane; ++ int clk_pol = display->hw_config.u.dsi.clk_pol; ++ int data1_pol = display->hw_config.u.dsi.data1_pol; ++ int data2_pol = display->hw_config.u.dsi.data2_pol; ++ ++ r = dsi_read_reg(DSI_COMPLEXIO_CFG1); ++ r = FLD_MOD(r, clk_lane, 2, 0); ++ r = FLD_MOD(r, clk_pol, 3, 3); ++ r = FLD_MOD(r, data1_lane, 6, 4); ++ r = FLD_MOD(r, data1_pol, 7, 7); ++ r = FLD_MOD(r, data2_lane, 10, 8); ++ r = FLD_MOD(r, data2_pol, 11, 11); ++ dsi_write_reg(DSI_COMPLEXIO_CFG1, r); ++ ++ /* The configuration of the DSI complex I/O (number of data lanes, ++ position, differential order) should not be changed while ++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for ++ the hardware to take into account a new configuration of the complex ++ I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to ++ follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, ++ then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set ++ DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the ++ DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the ++ DSI complex I/O configuration is unknown. */ ++ ++ /* ++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); ++ REG_FLD_MOD(DSI_CTRL, 0, 0, 0); ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); ++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); ++ */ ++} ++ ++static inline int ns2ddr(int ns) ++{ ++ /* convert time in ns to ddr ticks, rounding up */ ++ return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000; ++} ++ ++static void dsi_complexio_timings(void) ++{ ++ u32 r; ++ u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; ++ u32 tlpx_half, tclk_trail, tclk_zero; ++ u32 tclk_prepare; ++ ++ /* calculate timings */ ++ ++ /* 1 * DDR_CLK = 2 * UI */ ++ ++ /* min 40ns + 4*UI max 85ns + 6*UI */ ++ ths_prepare = ns2ddr(59) + 2; ++ ++ /* min 145ns + 10*UI */ ++ ths_prepare_ths_zero = ns2ddr(145) + 5; ++ ++ /* min max(8*UI, 60ns+4*UI) */ ++ ths_trail = max(4, ns2ddr(60) + 2); ++ ++ /* min 100ns */ ++ ths_exit = ns2ddr(100); ++ ++ /* tlpx min 50n */ ++ tlpx_half = ns2ddr(25); ++ ++ /* min 60ns */ ++ tclk_trail = ns2ddr(60); ++ ++ /* min 38ns, max 95ns */ ++ tclk_prepare = ns2ddr(38); ++ ++ /* min tclk-prepare + tclk-zero = 300ns */ ++ tclk_zero = ns2ddr(300 - 38); ++ ++#ifdef VERBOSE ++ DSSDBG("ths_prepare %d, ths_prepare_ths_zero %d\n", ++ ths_prepare, ths_prepare_ths_zero); ++ DSSDBG("ths_trail %d, ths_exit %d\n", ths_trail, ths_exit); ++ ++ ++ DSSDBG("tlpx_half %d, tclk_trail %d, tclk_zero %d\n", tlpx_half, ++ tclk_trail, tclk_zero); ++ DSSDBG("tclk_prepare %d\n", tclk_prepare); ++#endif ++ ++ /* program timings */ ++ ++ r = dsi_read_reg(DSIPHY_CFG0); ++ r = FLD_MOD(r, ths_prepare, 31, 24); ++ r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); ++ r = FLD_MOD(r, ths_trail, 15, 8); ++ r = FLD_MOD(r, ths_exit, 7, 0); ++ dsi_write_reg(DSIPHY_CFG0, r); ++ ++ r = dsi_read_reg(DSIPHY_CFG1); ++ r = FLD_MOD(r, tlpx_half, 22, 16); ++ r = FLD_MOD(r, tclk_trail, 15, 8); ++ r = FLD_MOD(r, tclk_zero, 7, 0); ++ dsi_write_reg(DSIPHY_CFG1, r); ++ ++ r = dsi_read_reg(DSIPHY_CFG2); ++ r = FLD_MOD(r, tclk_prepare, 7, 0); ++ dsi_write_reg(DSIPHY_CFG2, r); ++} ++ ++ ++static int dsi_complexio_init(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_complexio_init\n"); ++ ++ /* CIO_CLK_ICG, enable L3 clk to CIO */ ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); ++ ++ if (wait_for_bit_change(DSIPHY_CFG5, 30, 1) != 1) { ++ DSSERR("DSI: ComplexIO PHY not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ dsi_complexio_config(display); ++ ++ r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); ++ ++ if (r) ++ goto err; ++ ++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { ++ DSSERR("DSI: ComplexIO not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { ++ DSSERR("DSI: ComplexIO LDO power down.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ dsi_complexio_timings(); ++ ++ /* ++ The configuration of the DSI complex I/O (number of data lanes, ++ position, differential order) should not be changed while ++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the ++ hardware to recognize a new configuration of the complex I/O (done ++ in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow ++ this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next ++ reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] ++ LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN ++ bit to 1. If the sequence is not followed, the DSi complex I/O ++ configuration is undetermined. ++ */ ++ dsi_if_enable(1); ++ dsi_if_enable(0); ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ ++ dsi_if_enable(1); ++ dsi_if_enable(0); ++ ++ DSSDBG("CIO init done\n"); ++err: ++ return r; ++} ++ ++static void dsi_complexio_uninit(void) ++{ ++ dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); ++} ++ ++ ++ ++static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, ++ enum fifo_size size3, enum fifo_size size4) ++{ ++ u32 r = 0; ++ int add = 0; ++ int i; ++ ++ dsi.vc[0].fifo_size = size1; ++ dsi.vc[1].fifo_size = size2; ++ dsi.vc[2].fifo_size = size3; ++ dsi.vc[3].fifo_size = size4; ++ ++ for (i = 0; i < 4; i++) { ++ u8 v; ++ int size = dsi.vc[i].fifo_size; ++ ++ if (add + size > 4) { ++ DSSERR("DSI: Illegal FIFO configuration\n"); ++ BUG(); ++ } ++ ++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); ++ r |= v << (8 * i); ++ /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ ++ add += size; ++ } ++ ++ dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); ++} ++ ++static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, ++ enum fifo_size size3, enum fifo_size size4) ++{ ++ u32 r = 0; ++ int add = 0; ++ int i; ++ ++ dsi.vc[0].fifo_size = size1; ++ dsi.vc[1].fifo_size = size2; ++ dsi.vc[2].fifo_size = size3; ++ dsi.vc[3].fifo_size = size4; ++ ++ for (i = 0; i < 4; i++) { ++ u8 v; ++ int size = dsi.vc[i].fifo_size; ++ ++ if (add + size > 4) { ++ DSSERR("DSI: Illegal FIFO configuration\n"); ++ BUG(); ++ } ++ ++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); ++ r |= v << (8 * i); ++ /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ ++ add += size; ++ } ++ ++ dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); ++} ++ ++static int dsi_force_tx_stop_mode_io(void) ++{ ++ u32 r; ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { ++ DSSERR("TX_STOP bit not going down\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void dsi_vc_print_status(int channel) ++{ ++ u32 r; ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " ++ "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", ++ channel, ++ FLD_GET(r, 5, 5), ++ FLD_GET(r, 6, 6), ++ FLD_GET(r, 15, 15), ++ FLD_GET(r, 16, 16), ++ FLD_GET(r, 20, 20)); ++ ++ r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); ++ DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); ++} ++ ++static void dsi_vc_config(int channel) ++{ ++ u32 r; ++ ++ DSSDBG("dsi_vc_config %d\n", channel); ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ ++ r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ ++ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ ++ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ ++ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ ++ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ ++ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ ++ r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ ++ ++ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ ++ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ ++ ++ dsi_write_reg(DSI_VC_CTRL(channel), r); ++} ++ ++static void dsi_vc_config_vp(int channel) ++{ ++ u32 r; ++ ++ DSSDBG("dsi_vc_config_vp\n"); ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ ++ r = FLD_MOD(r, 1, 1, 1); /* SOURCE, 1 = video port */ ++ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ ++ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ ++ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ ++ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ ++ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ ++ r = FLD_MOD(r, 1, 9, 9); /* MODE_SPEED, high speed on/off */ ++ ++ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ ++ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ ++ ++ dsi_write_reg(DSI_VC_CTRL(channel), r); ++} ++ ++ ++static int dsi_vc_enable(int channel, int enable) ++{ ++ DSSDBG("dsi_vc_enable channel %d, enable %d\n", channel, enable); ++ ++ enable = enable ? 1 : 0; ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); ++ ++ if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { ++ DSSERR("Failed to set dsi_vc_enable to %d\n", enable); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void dsi_vc_enable_hs(int channel, int enable) ++{ ++ DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); ++ ++ dsi_vc_enable(channel, 0); ++ dsi_if_enable(0); ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); ++ ++ dsi_vc_enable(channel, 1); ++ dsi_if_enable(1); ++ ++ dsi_force_tx_stop_mode_io(); ++} ++ ++static void dsi_vc_flush_long_data(int channel) ++{ ++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { ++ u32 val; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", ++ (val >> 0) & 0xff, ++ (val >> 8) & 0xff, ++ (val >> 16) & 0xff, ++ (val >> 24) & 0xff); ++ } ++} ++ ++static u16 dsi_vc_flush_receive_data(int channel) ++{ ++ /* RX_FIFO_NOT_EMPTY */ ++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { ++ u32 val; ++ u8 dt; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ DSSDBG("\trawval %#08x\n", val); ++ dt = FLD_GET(val, 7, 0); ++ if (dt == DSI_DT_RX_ACK_WITH_ERR) { ++ u16 err = FLD_GET(val, 23, 8); ++ DSSERR("\tACK with ERROR: %#x\n", err); ++ if (err & (1 << 9)) ++ DSSERR("\t\tECC multibit\n"); ++ if (err & (1 << 11)) ++ DSSERR("\t\tData type not recognized\n"); ++ if (err & (1 << 12)) ++ DSSERR("\t\tInvalid VC ID\n"); ++ ++ } else if (dt == DSI_DT_RX_SHORT_READ_1) { ++ DSSDBG("\tDCS short response, 1 byte: %#x\n", ++ FLD_GET(val, 23, 8)); ++ return FLD_GET(val, 23, 8); ++ } else if (dt == DSI_DT_RX_SHORT_READ_2) { ++ DSSDBG("\tDCS short response, 2 byte: %#x\n", ++ FLD_GET(val, 23, 8)); ++ return FLD_GET(val, 23, 8); ++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { ++ DSSDBG("\tDCS long response, len %d\n", ++ FLD_GET(val, 23, 8)); ++ dsi_vc_flush_long_data(channel); ++ } else { ++ DSSERR("\tunknown datatype\n"); ++ } ++ } ++ return 0; ++} ++ ++static int dsi_vc_send_bta(int channel) ++{ ++ unsigned long tmo; ++ ++ /*DSSDBG("dsi_vc_send_bta_sync %d\n", channel); */ ++ ++ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ ++ DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); ++ dsi_vc_flush_receive_data(channel); ++ } ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ ++ ++ tmo = jiffies + msecs_to_jiffies(10); ++ while (REG_GET(DSI_VC_CTRL(channel), 6, 6) == 1) { ++ if (time_after(jiffies, tmo)) { ++ DSSERR("Failed to send BTA\n"); ++ return -EIO; ++ } ++ } ++ ++ return 0; ++} ++ ++static int dsi_vc_send_bta_sync(int channel) ++{ ++ int r = 0; ++ ++ init_completion(&dsi.bta_completion); ++ ++ dsi_vc_enable_bta_irq(channel); ++ ++ r = dsi_vc_send_bta(channel); ++ if (r) ++ goto err; ++ ++ if (wait_for_completion_timeout(&dsi.bta_completion, ++ msecs_to_jiffies(500)) == 0) { ++ DSSERR("Failed to receive BTA\n"); ++ r = -EIO; ++ goto err; ++ } ++err: ++ dsi_vc_disable_bta_irq(channel); ++ ++ return r; ++} ++ ++static inline void dsi_vc_write_long_header(int channel, u8 data_type, ++ u16 len, u8 ecc) ++{ ++ u32 val; ++ u8 data_id; ++ ++ /*data_id = data_type | channel << 6; */ ++ data_id = data_type | dsi.vc[channel].dest_per << 6; ++ ++ val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | ++ FLD_VAL(ecc, 31, 24); ++ ++ dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); ++} ++ ++static inline void dsi_vc_write_long_payload(int channel, ++ u8 b1, u8 b2, u8 b3, u8 b4) ++{ ++ u32 val; ++ ++ val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; ++ ++/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", ++ b1, b2, b3, b4, val); */ ++ ++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); ++} ++ ++static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, ++ u8 ecc) ++{ ++ /*u32 val; */ ++ int i; ++ u8 *p; ++ int r = 0; ++ u8 b1, b2, b3, b4; ++ ++ /*DSSDBG("dsi_vc_send_long, %d bytes\n", len); */ ++ ++ /* len + header */ ++ if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { ++ DSSERR("DSI: unable to send long packet: packet too long.\n"); ++ return -EINVAL; ++ } ++ ++ dsi_vc_write_long_header(channel, data_type, len, ecc); ++ ++ /*dsi_vc_print_status(0); */ ++ ++ p = data; ++ for (i = 0; i < len >> 2; i++) { ++ /*DSSDBG("\tsending full packet %d\n", i); */ ++ /*dsi_vc_print_status(0); */ ++ ++ b1 = *p++; ++ b2 = *p++; ++ b3 = *p++; ++ b4 = *p++; ++ ++ dsi_vc_write_long_payload(channel, b1, b2, b3, b4); ++ } ++ ++ i = len % 4; ++ if (i) { ++ b1 = 0; b2 = 0; b3 = 0; ++ ++ /*DSSDBG("\tsending remainder bytes %d\n", i); */ ++ ++ switch (i) { ++ case 3: ++ b1 = *p++; ++ b2 = *p++; ++ b3 = *p++; ++ break; ++ case 2: ++ b1 = *p++; ++ b2 = *p++; ++ break; ++ case 1: ++ b1 = *p++; ++ break; ++ } ++ ++ dsi_vc_write_long_payload(channel, b1, b2, b3, 0); ++ } ++ ++ return r; ++} ++ ++static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) ++{ ++ u32 r; ++ u8 data_id; ++/* ++ DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", ++ channel, ++ data_type, data & 0xff, (data >> 8) & 0xff); ++*/ ++ if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { ++ DSSERR("ERROR FIFO FULL, aborting transfer\n"); ++ return -EINVAL; ++ } ++ ++ data_id = data_type | channel << 6; ++ ++ r = (data_id << 0) | (data << 8) | (ecc << 24); ++ ++ dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); ++ ++ return 0; ++} ++ ++int dsi_vc_send_null(int channel) ++{ ++ u8 nullpkg[] = {0, 0, 0, 0}; ++ return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); ++} ++EXPORT_SYMBOL(dsi_vc_send_null); ++ ++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) ++{ ++ int r; ++ ++ BUG_ON(len == 0); ++ ++ if (len == 1) { ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, ++ data[0], 0); ++ } else if (len == 2) { ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, ++ data[0] | (data[1] << 8), 0); ++ } else { ++ /* 0x39 = DCS Long Write */ ++ r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, ++ data, len, 0); ++ } ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); ++ ++int dsi_vc_dcs_write(int channel, u8 *data, int len) ++{ ++ int r; ++ ++ r = dsi_vc_dcs_write_nosync(channel, data, len); ++ if (r) ++ return r; ++ ++ /* Some devices need time to process the msg in low power mode. ++ This also makes the write synchronous, and checks that ++ the peripheral is still alive */ ++ r = dsi_vc_send_bta_sync(channel); ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_dcs_write); ++ ++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) ++{ ++ u32 val; ++ u8 dt; ++ int debug = 0; ++ ++ if (debug) ++ DSSDBG("dsi_vc_dcs_read\n"); ++ ++ dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); ++ ++ dsi_vc_send_bta_sync(channel); ++ ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ if (debug) ++ DSSDBG("\trawval %#08x\n", val); ++ dt = FLD_GET(val, 7, 0); ++ if (dt == DSI_DT_RX_ACK_WITH_ERR) { ++ u16 err = FLD_GET(val, 23, 8); ++ DSSERR("\tACK with ERROR: %#x\n", err); ++ if (err & (1 << 9)) ++ DSSERR("\t\tECC multibit\n"); ++ if (err & (1 << 11)) ++ DSSERR("\t\tData type not recognized\n"); ++ if (err & (1 << 12)) ++ DSSERR("\t\tInvalid VC ID\n"); ++ return -1; ++ ++ } else if (dt == DSI_DT_RX_SHORT_READ_1) { ++ u8 data = FLD_GET(val, 15, 8); ++ if (debug) ++ DSSDBG("\tDCS short response, 1 byte: %#x\n", data); ++ ++ if (buflen < 1) ++ return -1; ++ ++ buf[0] = data; ++ ++ return 1; ++ } else if (dt == DSI_DT_RX_SHORT_READ_2) { ++ u16 data = FLD_GET(val, 23, 8); ++ if (debug) ++ DSSDBG("\tDCS short response, 2 byte: %#x\n", data); ++ ++ if (buflen < 2) ++ return -1; ++ ++ buf[0] = data & 0xff; ++ buf[1] = (data >> 8) & 0xff; ++ ++ return 2; ++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { ++ int x; ++ int len = FLD_GET(val, 23, 8); ++ if (debug) ++ DSSDBG("\tDCS long response, len %d\n", len); ++ ++ if (len > buflen) ++ return -1; ++ ++ x = 0; ++ while (x < len) { ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ if (debug) ++ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 " ++ "%#02x\n", ++ (val >> 0) & 0xff, ++ (val >> 8) & 0xff, ++ (val >> 16) & 0xff, ++ (val >> 24) & 0xff); ++ ++ if (x < len) ++ buf[x++] = (val >> 0) & 0xff; ++ if (x < len) ++ buf[x++] = (val >> 8) & 0xff; ++ if (x < len) ++ buf[x++] = (val >> 16) & 0xff; ++ if (x < len) ++ buf[x++] = (val >> 24) & 0xff; ++ } ++ ++ return len; ++ } else { ++ DSSERR("\tunknown datatype\n"); ++ return -1; ++ } ++} ++EXPORT_SYMBOL(dsi_vc_dcs_read); ++ ++ ++int dsi_vc_set_max_rx_packet_size(int channel, u16 len) ++{ ++ return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, ++ len, 0); ++} ++EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); ++ ++ ++static int dsi_set_lp_rx_timeout(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("LP_TX_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING2); ++ r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ ++ r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ ++ r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ ++ r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ ++ dsi_write_reg(DSI_TIMING2, r); ++ ++ DSSDBG("LP_RX_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_ta_timeout(int ns, int x8, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("TA_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ ++ r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ ++ r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ ++ r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ DSSDBG("TA_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_stop_state_counter(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("STOP_STATE_COUNTER_IO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ ++ r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ ++ r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ ++ r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ DSSDBG("STOP_STATE_COUNTER %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_hs_tx_timeout(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in TxByteClkHS */ ++ ++ fck = dsi.ddr_clk / 4; ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("HS_TX_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING2); ++ r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ ++ r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ ++ r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ ++ r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ ++ dsi_write_reg(DSI_TIMING2, r); ++ ++ DSSDBG("HS_TX_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++static int dsi_proto_config(struct omap_display *display) ++{ ++ u32 r; ++ int buswidth = 0; ++ ++ dsi_config_tx_fifo(DSI_FIFO_SIZE_128, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0); ++ ++ dsi_config_rx_fifo(DSI_FIFO_SIZE_128, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0); ++ ++ /* XXX what values for the timeouts? */ ++ dsi_set_stop_state_counter(1000, 0, 0); ++ ++ dsi_set_ta_timeout(50000, 1, 1); ++ ++ /* 3000ns * 16 */ ++ dsi_set_lp_rx_timeout(3000, 0, 1); ++ ++ /* 10000ns * 4 */ ++ dsi_set_hs_tx_timeout(10000, 1, 0); ++ ++ switch (display->bpp) { ++ case 16: ++ buswidth = 0; ++ break; ++ case 18: ++ buswidth = 1; ++ break; ++ case 24: ++ buswidth = 2; ++ break; ++ default: ++ BUG(); ++ } ++ ++ r = dsi_read_reg(DSI_CTRL); ++ r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ ++ r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ ++ r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ ++ /* XXX what should the ratio be */ ++ r = FLD_MOD(r, 0, 4, 4); /* VP_CLK_RATIO, VP_PCLK = VP_CLK/2 */ ++ r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ ++ r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ ++ r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ ++ r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ ++ r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ ++ r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ ++ r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ ++ ++ dsi_write_reg(DSI_CTRL, r); ++ ++ /* we configure vc0 for L4 communication, and ++ * vc1 for dispc */ ++ dsi_vc_config(0); ++ dsi_vc_config_vp(1); ++ ++ /* set all vc targets to peripheral 0 */ ++ dsi.vc[0].dest_per = 0; ++ dsi.vc[1].dest_per = 0; ++ dsi.vc[2].dest_per = 0; ++ dsi.vc[3].dest_per = 0; ++ ++ return 0; ++} ++ ++static void dsi_proto_timings(void) ++{ ++ int tlpx_half, tclk_zero, tclk_prepare, tclk_trail; ++ int tclk_pre, tclk_post; ++ int ddr_clk_pre, ddr_clk_post; ++ u32 r; ++ ++ r = dsi_read_reg(DSIPHY_CFG1); ++ tlpx_half = FLD_GET(r, 22, 16); ++ tclk_trail = FLD_GET(r, 15, 8); ++ tclk_zero = FLD_GET(r, 7, 0); ++ ++ r = dsi_read_reg(DSIPHY_CFG2); ++ tclk_prepare = FLD_GET(r, 7, 0); ++ ++ /* min 8*UI */ ++ tclk_pre = 4; ++ /* min 60ns + 52*UI */ ++ tclk_post = ns2ddr(60) + 26; ++ ++ ddr_clk_pre = (tclk_pre + tlpx_half*2 + tclk_zero + tclk_prepare) / 4; ++ ddr_clk_post = (tclk_post + tclk_trail) / 4; ++ ++ r = dsi_read_reg(DSI_CLK_TIMING); ++ r = FLD_MOD(r, ddr_clk_pre, 15, 8); ++ r = FLD_MOD(r, ddr_clk_post, 7, 0); ++ dsi_write_reg(DSI_CLK_TIMING, r); ++ ++#ifdef VERBOSE ++ DSSDBG("ddr_clk_pre %d, ddr_clk_post %d\n", ++ ddr_clk_pre, ++ ddr_clk_post); ++#endif ++} ++ ++ ++#define DSI_DECL_VARS \ ++ int __dsi_cb = 0; u32 __dsi_cv = 0; ++ ++#define DSI_FLUSH(ch) \ ++ if (__dsi_cb > 0) { \ ++ /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ ++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ ++ __dsi_cb = __dsi_cv = 0; \ ++ } ++ ++#define DSI_PUSH(ch, data) \ ++ do { \ ++ __dsi_cv |= (data) << (__dsi_cb * 8); \ ++ /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ ++ if (++__dsi_cb > 3) \ ++ DSI_FLUSH(ch); \ ++ } while (0) ++ ++static int dsi_update_screen_l4(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ /* Note: supports only 24bit colors in 32bit container */ ++ int first = 1; ++ int fifo_stalls = 0; ++ int max_dsi_packet_size; ++ int max_data_per_packet; ++ int max_pixels_per_packet; ++ int pixels_left; ++ int bytespp = 3; ++ int scr_width; ++ u32 *data; ++ int start_offset; ++ int horiz_inc; ++ int current_x; ++ struct omap_overlay *ovl; ++ ++ debug_irq = 0; ++ ++ DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ ovl = &display->manager->overlays[0]; ++ ++ if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) ++ return -EINVAL; ++ ++ if (display->ctrl->bpp != 24) ++ return -EINVAL; ++ ++ enable_clocks(1); ++ ++ scr_width = ovl->info.screen_width; ++ data = ovl->info.vaddr; ++ ++ start_offset = scr_width * y + x; ++ horiz_inc = scr_width - w; ++ current_x = x; ++ ++ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes ++ * in fifo */ ++ ++ /* When using CPU, max long packet size is TX buffer size */ ++ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; ++ ++ /* we seem to get better perf if we divide the tx fifo to half, ++ and while the other half is being sent, we fill the other half ++ max_dsi_packet_size /= 2; */ ++ ++ max_data_per_packet = max_dsi_packet_size - 4 - 1; ++ ++ max_pixels_per_packet = max_data_per_packet / bytespp; ++ ++ DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ pixels_left = w * h; ++ ++ DSSDBG("total pixels %d\n", pixels_left); ++ ++ data += start_offset; ++ ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = bytespp; ++ ++ start_measuring(); ++ ++ while (pixels_left > 0) { ++ /* 0x2c = write_memory_start */ ++ /* 0x3c = write_memory_continue */ ++ u8 dcs_cmd = first ? 0x2c : 0x3c; ++ int pixels; ++ DSI_DECL_VARS; ++ first = 0; ++ ++#if 1 ++ /* using fifo not empty */ ++ /* TX_FIFO_NOT_EMPTY */ ++ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { ++ udelay(1); ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return -EIO; ++ } ++ } ++#elif 1 ++ /* using fifo emptiness */ ++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < ++ max_dsi_packet_size) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return -EIO; ++ } ++ } ++#else ++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return -EIO; ++ } ++ } ++#endif ++ pixels = min(max_pixels_per_packet, pixels_left); ++ ++ pixels_left -= pixels; ++ ++ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, ++ 1 + pixels * bytespp, 0); ++ ++ DSI_PUSH(0, dcs_cmd); ++ ++ while (pixels-- > 0) { ++ u32 pix = *data++; ++ ++ DSI_PUSH(0, (pix >> 16) & 0xff); ++ DSI_PUSH(0, (pix >> 8) & 0xff); ++ DSI_PUSH(0, (pix >> 0) & 0xff); ++ ++ current_x++; ++ if (current_x == x+w) { ++ current_x = x; ++ data += horiz_inc; ++ } ++ } ++ ++ DSI_FLUSH(0); ++ } ++ ++ end_measuring("L4"); ++ ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++#if 0 ++static void dsi_clear_screen_l4(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ int first = 1; ++ int fifo_stalls = 0; ++ int max_dsi_packet_size; ++ int max_data_per_packet; ++ int max_pixels_per_packet; ++ int pixels_left; ++ int bytespp = 3; ++ int pixnum; ++ ++ debug_irq = 0; ++ ++ DSSDBG("dsi_clear_screen_l4 (%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ if (display->ctrl->bpp != 24) ++ return -EINVAL; ++ ++ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) ++ * bytes in fifo */ ++ ++ /* When using CPU, max long packet size is TX buffer size */ ++ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; ++ ++ max_data_per_packet = max_dsi_packet_size - 4 - 1; ++ ++ max_pixels_per_packet = max_data_per_packet / bytespp; ++ ++ enable_clocks(1); ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ pixels_left = w * h; ++ ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = bytespp; ++ ++ start_measuring(); ++ ++ pixnum = 0; ++ ++ while (pixels_left > 0) { ++ /* 0x2c = write_memory_start */ ++ /* 0x3c = write_memory_continue */ ++ u8 dcs_cmd = first ? 0x2c : 0x3c; ++ int pixels; ++ DSI_DECL_VARS; ++ first = 0; ++ ++ /* TX_FIFO_NOT_EMPTY */ ++ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow\n"); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return; ++ } ++ } ++ ++ pixels = min(max_pixels_per_packet, pixels_left); ++ ++ pixels_left -= pixels; ++ ++ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, ++ 1 + pixels * bytespp, 0); ++ ++ DSI_PUSH(0, dcs_cmd); ++ ++ while (pixels-- > 0) { ++ u32 pix; ++ ++ pix = 0x000000; ++ ++ DSI_PUSH(0, (pix >> 16) & 0xff); ++ DSI_PUSH(0, (pix >> 8) & 0xff); ++ DSI_PUSH(0, (pix >> 0) & 0xff); ++ } ++ ++ DSI_FLUSH(0); ++ } ++ ++ enable_clocks(0); ++ ++ end_measuring("L4 CLEAR"); ++} ++#endif ++ ++static int dsi_wait_for_framedone(void) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ if (dsi.update_ongoing) { ++ long wait = msecs_to_jiffies(1000); ++ dsi.update_syncers++; ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ wait = wait_for_completion_timeout(&dsi.update_completion, ++ wait); ++ if (wait == 0) { ++ DSSERR("timeout waiting sync\n"); ++ return -ETIME; ++ } ++ } else { ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ } ++ ++ return 0; ++} ++ ++static void dsi_setup_update_dispc(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ int bytespp = 3; ++ ++ DSSDBG("dsi_setup_update_dispc(%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ dsi.update_region.display = display; ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = bytespp; ++ ++ enable_clocks(1); ++ ++ dispc_setup_partial_planes(display, &x, &y, &w, &h); ++ ++ dispc_set_lcd_size(w, h); ++ ++ enable_clocks(0); ++} ++ ++static void dsi_update_screen_dispc(struct omap_display *display) ++{ ++ int bytespp = 3; ++ int total_len; ++ int line_packet_len; ++ int x, y, w, h; ++ u32 l; ++ ++ x = dsi.update_region.x; ++ y = dsi.update_region.y; ++ w = dsi.update_region.w; ++ h = dsi.update_region.h; ++ ++ DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ enable_clocks(1); ++ ++ /* TODO: one packet could be longer, I think? Max is the line buffer */ ++ line_packet_len = w * bytespp + 1; /* 1 byte for DCS cmd */ ++ total_len = line_packet_len * h; ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ if (0) ++ dsi_vc_print_status(1); ++ ++ start_measuring(); ++ ++ l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ ++ dsi_write_reg(DSI_VC_TE(1), l); ++ ++ dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, line_packet_len, 0); ++ ++ if (dsi.use_te) ++ l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ ++ else ++ l = FLD_MOD(l, 1, 31, 31); /* TE_START */ ++ dsi_write_reg(DSI_VC_TE(1), l); ++ ++ dispc_enable_lcd_out(1); ++ ++ if (dsi.use_te) ++ dsi_vc_send_bta(1); ++} ++ ++static void framedone_callback(void *data, u32 mask) ++{ ++ if (dsi.framedone_scheduled) { ++ DSSERR("Framedone already scheduled. Bogus FRAMEDONE IRQ?\n"); ++ return; ++ } ++ ++ dsi.framedone_scheduled = 1; ++ ++ /* We get FRAMEDONE when DISPC has finished sending pixels and turns ++ * itself off. However, DSI still has the pixels in its buffers, and ++ * is sending the data. Thus we have to wait until we can do a new ++ * transfer or turn the clocks off. We do that in a separate work ++ * func. */ ++ schedule_work(&dsi.framedone_work); ++} ++ ++static void framedone_worker(struct work_struct *work) ++{ ++ unsigned long flags; ++ u32 l; ++ unsigned long tmo; ++ int i = 0; ++ ++ l = REG_GET(DSI_VC_TE(1), 23, 0); /* TE_SIZE */ ++ ++ /* There shouldn't be much stuff in DSI buffers, if any, so we'll ++ * just busyloop */ ++ if (l > 0) { ++ tmo = jiffies + msecs_to_jiffies(50); ++ while (REG_GET(DSI_VC_TE(1), 23, 0) > 0) { /* TE_SIZE */ ++ i++; ++ if (time_after(jiffies, tmo)) { ++ DSSERR("timeout waiting TE_SIZE to zero\n"); ++ break; ++ } ++ cpu_relax(); ++ } ++ } ++ ++ if (REG_GET(DSI_VC_TE(1), 30, 30)) ++ DSSERR("TE_EN not zero\n"); ++ ++ if (REG_GET(DSI_VC_TE(1), 31, 31)) ++ DSSERR("TE_START not zero\n"); ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ if (dsi.update_ongoing == 0) { ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ DSSERR("framedone irq without update request\n"); ++ return; ++ } ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ ++ end_measuring("DISPC"); ++ ++ DSSDBG("FRAMEDONE\n"); ++ ++#if 0 ++ if (l) ++ DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); ++#else ++ if (l > 1024*3) ++ DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); ++#endif ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ dsi.update_ongoing = 0; ++ while (dsi.update_syncers > 0) { ++ complete(&dsi.update_completion); ++ --dsi.update_syncers; ++ } ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ ++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC ++ dispc_fake_vsync_irq(); ++#endif ++ enable_clocks(0); ++ ++ dsi.framedone_scheduled = 0; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ dsi.update_ongoing = 1; ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ dsi_update_screen_dispc(dsi.update_region.display); ++ } ++} ++ ++static void dsi_start_auto_update(struct omap_display *display) ++{ ++ unsigned long flags; ++ int bytespp = 3; ++ ++ DSSDBG("starting auto update\n"); ++ ++ dsi.update_region.display = display; ++ dsi.update_region.x = 0; ++ dsi.update_region.y = 0; ++ dsi.update_region.w = display->x_res; ++ dsi.update_region.h = display->y_res; ++ dsi.update_region.bytespp = bytespp; ++ ++ enable_clocks(1); ++ ++ dispc_set_lcd_size(display->x_res, display->y_res); ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ dsi.update_ongoing = 1; ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ dsi_update_screen_dispc(display); ++} ++ ++static void dsi_stop_auto_update(void) ++{ ++ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; ++ ++ DSSDBG("waiting for display to finish.\n"); ++ dsi_wait_for_framedone(); ++ DSSDBG("done waiting\n"); ++ enable_clocks(0); ++ ++ dsi.update_mode = OMAP_DSS_UPDATE_MANUAL; ++} ++ ++static int dsi_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == dsi.update_mode) ++ return 0; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_stop_auto_update(); ++ else if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) ++ dsi_wait_for_framedone(); ++ ++ dsi.update_mode = mode; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_start_auto_update(display); ++ ++ return 0; ++} ++ ++/* Display funcs */ ++ ++static int dsi_display_enable(struct omap_display *display) ++{ ++ int r = 0; ++ struct dsi_clock_info cinfo; ++ ++ DSSDBG("dsi_display_enable\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ r = -EINVAL; ++ goto err0; ++ } ++ ++ enable_clocks(1); ++ ++ r = omap_dispc_register_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ if (r) { ++ DSSERR("can't get FRAMEDONE irq\n"); ++ goto err1; ++ } ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); ++ dispc_enable_fifohandcheck(1); ++ dispc_setup_plane_fifo(OMAP_DSS_GFX, 0); ++ dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, 0); ++ dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, 0); ++ dispc_set_tft_data_lines(display->bpp); ++ ++ { ++ struct omap_video_timings timings = { ++ .hsw = 1, ++ .hfp = 1, ++ .hbp = 1, ++ .vsw = 1, ++ .vfp = 0, ++ .vbp = 0, ++ }; ++ ++ dispc_set_lcd_timings(&timings); ++ } ++ ++ _dsi_print_reset_status(); ++ ++ r = dsi_pll_init(1, 0); ++ if (r) ++ goto err2; ++ ++ /* XXX hardcoded for 300Mbp/lane for now */ ++ r = dsi_pll_calc_datafreq(600 * 1000 * 1000, &cinfo); ++ if (r) ++ goto err3; ++ ++ r = dsi_pll_program(&cinfo); ++ if (r) ++ goto err3; ++ ++ DSSDBG("PLL OK\n"); ++ ++ r = dsi_complexio_init(display); ++ if (r) ++ goto err3; ++ ++ _dsi_print_reset_status(); ++ ++ dsi_proto_timings(); ++ dsi_set_lp_clk_divisor(); ++ ++ if (1) ++ _dsi_print_reset_status(); ++ ++ r = dsi_proto_config(display); ++ if (r) ++ goto err4; ++ ++ /* enable interface */ ++ dsi_vc_enable(0, 1); ++ dsi_vc_enable(1, 1); ++ dsi_if_enable(1); ++ dsi_force_tx_stop_mode_io(); ++ ++ ++ if (display->ctrl && display->ctrl->enable) { ++ r = display->ctrl->enable(display); ++ if (r) ++ goto err5; ++ } ++ ++ if (display->panel && display->panel->enable) { ++ r = display->panel->enable(display); ++ if (r) ++ goto err6; ++ } ++ ++ if (dsi.use_te) { ++ r = display->ctrl->enable_te(display, 1); ++ if (r) ++ goto err7; ++ } ++ ++ /* enable high-speed after initial config */ ++ dsi_vc_enable_hs(0, 1); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_start_auto_update(display); ++ ++ enable_clocks(0); ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++err7: ++ if (display->panel && display->panel->disable) ++ display->panel->disable(display); ++err6: ++ if (display->ctrl && display->ctrl->disable) ++ display->ctrl->disable(display); ++err5: ++ dsi_if_enable(0); ++err4: ++ dsi_complexio_uninit(); ++err3: ++ dsi_pll_uninit(); ++err2: ++ omap_dispc_unregister_isr(framedone_callback); ++err1: ++ enable_clocks(0); ++err0: ++ mutex_unlock(&dsi.lock); ++ DSSDBG("dsi_display_enable FAILED\n"); ++ return r; ++} ++ ++static void dsi_display_disable(struct omap_display *display) ++{ ++ DSSDBG("dsi_display_disable\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) ++ goto end; ++ ++ enable_clocks(1); ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_stop_auto_update(); ++ else if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) ++ dsi_wait_for_framedone(); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++ ++ omap_dispc_unregister_isr(framedone_callback); ++ ++ if (display->panel && display->panel->disable) ++ display->panel->disable(display); ++ if (display->ctrl && display->ctrl->disable) ++ display->ctrl->disable(display); ++ ++ /* XXX sleep a bit to make sure all DSI buffers are sent. ++ * We should check it from somewhere, fifo fullness I guess */ ++ msleep(200); ++ ++ dsi_complexio_uninit(); ++ dsi_pll_uninit(); ++ ++ enable_clocks(0); ++ ++end: ++ mutex_unlock(&dsi.lock); ++} ++ ++static int dsi_display_suspend(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EINVAL; ++ ++ if (display->panel->suspend) ++ display->panel->suspend(display); ++ ++ if (display->ctrl->suspend) ++ display->ctrl->suspend(display); ++ ++ display->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int dsi_display_resume(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ return -EINVAL; ++ ++ if (display->panel->resume) ++ display->panel->resume(display); ++ ++ if (display->ctrl->resume) ++ display->ctrl->resume(display); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static void dsi_display_set_mode(struct omap_display *display, ++ int x_res, int y_res, int bpp) ++{ ++ DSSDBG("dsi_display_set_mode %dx%d, %dbpp\n", x_res, y_res, bpp); ++} ++ ++static int dsi_display_update(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ unsigned long flags; ++ int r = 0; ++ ++ DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ mutex_lock(&dsi.lock); ++ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) ++ goto end; /* XXX return error? */ ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ ++ if (dsi.update_ongoing) { ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ DSSERR("DSI is busy\n"); ++ r = -EBUSY; ++ goto end; ++ } ++ ++ dsi.update_ongoing = 1; ++ ++ if (dsi.update_syncers > 0) ++ DSSERR("someone waiting for sync, and no update ongoing\n"); ++ ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ dsi_setup_update_dispc(display, x, y, w, h); ++ dsi_update_screen_dispc(display); ++ } else { ++ r = dsi_update_screen_l4(display, x, y, w, h); ++ if (r) ++ goto end; ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ dsi.update_ongoing = 0; ++ while (dsi.update_syncers > 0) { ++ complete(&dsi.update_completion); ++ --dsi.update_syncers; ++ } ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ } ++ ++end: ++ mutex_unlock(&dsi.lock); ++ return r; ++} ++ ++static int dsi_display_sync(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_display_sync\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) ++ goto end; ++ ++ r = dsi_wait_for_framedone(); ++ ++end: ++ mutex_unlock(&dsi.lock); ++ return r; ++} ++ ++static int dsi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ int r; ++ ++ DSSDBG("dsi_display_set_update_mode\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ r = dsi_set_update_mode(display, mode); ++ ++ mutex_unlock(&dsi.lock); ++ ++ return r; ++} ++ ++static enum omap_dss_update_mode dsi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return dsi.update_mode; ++} ++ ++static int dsi_display_enable_te(struct omap_display *display, int enable) ++{ ++ enum omap_dss_update_mode mode; ++ ++ DSSDBG("dsi_display_enable_te\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ enable_clocks(1); ++ ++ mode = dsi.update_mode; ++ ++ /* XXX perhaps suspend or something would be better here */ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_stop_auto_update(); ++ else if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) ++ dsi_wait_for_framedone(); ++ ++ dsi.use_te = enable; ++ display->ctrl->enable_te(display, enable); ++ if (enable) { ++ /* disable LP_RX_TO, so that we can receive TE. ++ * Time to wait for TE is longer than the timer allows */ ++ REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ ++ } else { ++ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ ++ } ++ ++ /* restore the old update mode */ ++ dsi_set_update_mode(display, mode); ++ ++ enable_clocks(0); ++ ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++} ++ ++static int dsi_display_get_te(struct omap_display *display) ++{ ++ return dsi.use_te; ++} ++ ++static int dsi_display_run_test(struct omap_display *display, int test_num) ++{ ++ enum omap_dss_update_mode mode; ++ int r = 0; ++ ++ DSSDBG("dsi_display_run_test %d\n", test_num); ++ ++ mutex_lock(&dsi.lock); ++ ++ enable_clocks(1); ++ ++ mode = dsi.update_mode; ++ ++ /* XXX perhaps suspend or something would be better here */ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_stop_auto_update(); ++ else if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) ++ dsi_wait_for_framedone(); ++ ++ /* run test first in low speed mode */ ++ dsi_vc_enable_hs(0, 0); ++ ++ if (display->ctrl->run_test) { ++ r = display->ctrl->run_test(display, test_num); ++ if (r) ++ goto fail; ++ } ++ ++ if (display->panel->run_test) { ++ r = display->panel->run_test(display, test_num); ++ if (r) ++ goto fail; ++ } ++ ++ /* then in high speed */ ++ dsi_vc_enable_hs(0, 1); ++ ++ if (display->ctrl->run_test) { ++ r = display->ctrl->run_test(display, test_num); ++ if (r) ++ goto fail; ++ } ++ ++ if (display->panel->run_test) ++ r = display->panel->run_test(display, test_num); ++ ++fail: ++ dsi_vc_enable_hs(0, 1); ++ ++ /* restore the old update mode */ ++ dsi_set_update_mode(display, mode); ++ ++ enable_clocks(0); ++ ++ mutex_unlock(&dsi.lock); ++ ++ return r; ++} ++ ++void dsi_init_display(struct omap_display *display) ++{ ++ DSSDBG("DSI init\n"); ++ ++ display->enable = dsi_display_enable; ++ display->disable = dsi_display_disable; ++ display->suspend = dsi_display_suspend; ++ display->resume = dsi_display_resume; ++ display->set_mode = dsi_display_set_mode; ++ display->update = dsi_display_update; ++ display->sync = dsi_display_sync; ++ display->set_update_mode = dsi_display_set_update_mode; ++ display->get_update_mode = dsi_display_get_update_mode; ++ display->enable_te = dsi_display_enable_te; ++ display->get_te = dsi_display_get_te; ++ display->run_test = dsi_display_run_test; ++ ++ display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++} ++ ++int dsi_init(void) ++{ ++ u32 rev; ++ ++ init_completion(&dsi.bta_completion); ++ INIT_WORK(&dsi.framedone_work, framedone_worker); ++ ++ init_completion(&dsi.update_completion); ++ spin_lock_init(&dsi.update_lock); ++ dsi.update_ongoing = 0; ++ dsi.update_syncers = 0; ++ ++ mutex_init(&dsi.lock); ++ ++ dsi.base = ioremap(DSI_BASE, SZ_1K); ++ if (!dsi.base) { ++ DSSERR("can't ioremap DSI\n"); ++ return -ENOMEM; ++ } ++ ++ dsi.dss_ick = get_dss_ick(); ++ dsi.dss1_fck = get_dss1_fck(); ++ dsi.dss2_fck = get_dss2_fck(); ++ ++ enable_clocks(1); ++ ++ /* Autoidle */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); ++ ++ /* ENWAKEUP */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); ++ ++ /* SIDLEMODE smart-idle */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); ++ ++ if (0) ++ _dsi_reset(); ++ ++ _dsi_initialize_irq(); ++ ++ rev = dsi_read_reg(DSI_REVISION); ++ printk(KERN_INFO "OMAP DSI rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++void dsi_exit(void) ++{ ++ iounmap(dsi.base); ++ ++ DSSDBG("omap_dsi_exit\n"); ++} ++ +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0008-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch b/packages/linux/linux-omap/0008-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch new file mode 100644 index 0000000000..76cc5c793e --- /dev/null +++ b/packages/linux/linux-omap/0008-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch @@ -0,0 +1,2821 @@ +From a993119097b63f30364ca17db4d039a401c44b4d Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Tue, 4 Nov 2008 15:12:21 +0200 +Subject: [PATCH] DSS: OMAPFB: fb driver for new display subsystem + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + arch/arm/plat-omap/fb.c | 9 +- + arch/arm/plat-omap/include/mach/omapfb.h | 7 + + drivers/video/Kconfig | 1 + + drivers/video/Makefile | 1 + + drivers/video/omap/Kconfig | 5 +- + drivers/video/omap2/Kconfig | 29 + + drivers/video/omap2/Makefile | 2 + + drivers/video/omap2/omapfb-ioctl.c | 428 ++++++++++ + drivers/video/omap2/omapfb-main.c | 1247 ++++++++++++++++++++++++++++++ + drivers/video/omap2/omapfb-sysfs.c | 833 ++++++++++++++++++++ + drivers/video/omap2/omapfb.h | 104 +++ + 11 files changed, 2663 insertions(+), 3 deletions(-) + create mode 100644 drivers/video/omap2/Kconfig + create mode 100644 drivers/video/omap2/Makefile + create mode 100644 drivers/video/omap2/omapfb-ioctl.c + create mode 100644 drivers/video/omap2/omapfb-main.c + create mode 100644 drivers/video/omap2/omapfb-sysfs.c + create mode 100644 drivers/video/omap2/omapfb.h + +diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c +index 3746222..0ba1603 100644 +--- a/arch/arm/plat-omap/fb.c ++++ b/arch/arm/plat-omap/fb.c +@@ -36,7 +36,8 @@ + #include <mach/sram.h> + #include <mach/omapfb.h> + +-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) ++#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) \ ++ || defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + + static struct omapfb_platform_data omapfb_config; + static int config_invalid; +@@ -298,14 +299,18 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart, + return reserved; + } + ++#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + void omapfb_set_ctrl_platform_data(void *data) + { + omapfb_config.ctrl_platform_data = data; + } ++#endif + + static inline int omap_init_fb(void) + { ++#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + const struct omap_lcd_config *conf; ++#endif + + if (config_invalid) + return 0; +@@ -313,6 +318,7 @@ static inline int omap_init_fb(void) + printk(KERN_ERR "Invalid FB mem configuration entries\n"); + return 0; + } ++#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); + if (conf == NULL) { + if (configured_regions) +@@ -321,6 +327,7 @@ static inline int omap_init_fb(void) + return 0; + } + omapfb_config.lcd = *conf; ++#endif + + return platform_device_register(&omap_fb_device); + } +diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h +index a3c4408..e69c0b1 100644 +--- a/arch/arm/plat-omap/include/mach/omapfb.h ++++ b/arch/arm/plat-omap/include/mach/omapfb.h +@@ -90,6 +90,13 @@ enum omapfb_color_format { + OMAPFB_COLOR_CLUT_1BPP, + OMAPFB_COLOR_RGB444, + OMAPFB_COLOR_YUY422, ++ ++ OMAPFB_COLOR_ARGB16, ++ OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ ++ OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ ++ OMAPFB_COLOR_ARGB32, ++ OMAPFB_COLOR_RGBA32, ++ OMAPFB_COLOR_RGBX32, + }; + + struct omapfb_update_window { +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index 0f13448..4b45731 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -2084,6 +2084,7 @@ config FB_METRONOME + and could also have been called by some vendors as PVI-nnnn. + + source "drivers/video/omap/Kconfig" ++source "drivers/video/omap2/Kconfig" + + source "drivers/video/backlight/Kconfig" + source "drivers/video/display/Kconfig" +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index 248bddc..4d69355 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -120,6 +120,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o + obj-$(CONFIG_FB_XILINX) += xilinxfb.o + obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o + obj-$(CONFIG_FB_OMAP) += omap/ ++obj-$(CONFIG_OMAP2_DSS) += omap2/ + obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o + obj-$(CONFIG_FB_CARMINE) += carminefb.o + +diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig +index 5ebd591..8b6c675 100644 +--- a/drivers/video/omap/Kconfig ++++ b/drivers/video/omap/Kconfig +@@ -1,6 +1,7 @@ + config FB_OMAP + tristate "OMAP frame buffer support (EXPERIMENTAL)" +- depends on FB && ARCH_OMAP ++ depends on FB && ARCH_OMAP && (OMAP2_DSS = "n") ++ + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -76,7 +77,7 @@ config FB_OMAP_BOOTLOADER_INIT + + config FB_OMAP_CONSISTENT_DMA_SIZE + int "Consistent DMA memory size (MB)" +- depends on FB_OMAP ++ depends on FB && ARCH_OMAP + range 1 14 + default 2 + help +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +new file mode 100644 +index 0000000..4b72479 +--- /dev/null ++++ b/drivers/video/omap2/Kconfig +@@ -0,0 +1,29 @@ ++config FB_OMAP2 ++ tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" ++ depends on FB && OMAP2_DSS ++ ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Frame buffer driver for OMAP2/3 based boards. ++ ++config FB_OMAP2_DEBUG ++ bool "Debug output for OMAP2/3 FB" ++ depends on FB_OMAP2 ++ ++config FB_OMAP2_FORCE_AUTO_UPDATE ++ bool "Force main display to automatic update mode" ++ depends on FB_OMAP2 ++ help ++ Forces main display to automatic update mode (if possible), ++ and also enables tearsync (if possible). By default ++ displays that support manual update are started in manual ++ update mode. ++ ++menu "OMAP2/3 Display Device Drivers" ++ depends on OMAP2_DSS ++ ++ ++endmenu ++ +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +new file mode 100644 +index 0000000..51c2e00 +--- /dev/null ++++ b/drivers/video/omap2/Makefile +@@ -0,0 +1,2 @@ ++obj-$(CONFIG_FB_OMAP2) += omapfb.o ++omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o +diff --git a/drivers/video/omap2/omapfb-ioctl.c b/drivers/video/omap2/omapfb-ioctl.c +new file mode 100644 +index 0000000..1ceb6b9 +--- /dev/null ++++ b/drivers/video/omap2/omapfb-ioctl.c +@@ -0,0 +1,428 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-ioctl.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/fb.h> ++#include <linux/device.h> ++#include <linux/uaccess.h> ++#include <linux/platform_device.h> ++ ++#include <mach/display.h> ++#include <mach/omapfb.h> ++ ++#include "omapfb.h" ++ ++static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ struct omap_overlay *ovl; ++ int r = 0; ++ ++ DBG("omapfb_setup_plane\n"); ++ ++ if (ofbi->num_overlays != 1) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ ovl = ofbi->overlays[0]; ++ ++ omapfb_lock(fbdev); ++ ++ if (display) { ++ if (pi->pos_x + pi->out_width > display->x_res || ++ pi->pos_y + pi->out_height > display->y_res) { ++ r = -EINVAL; ++ goto out; ++ } ++ } ++ ++ if (pi->enabled && !ofbi->region.size) { ++ /* ++ * This plane's memory was freed, can't enable it ++ * until it's reallocated. ++ */ ++ r = -EINVAL; ++ goto out; ++ } ++ ++ if (!ovl) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y, ++ pi->out_width, pi->out_height); ++ if (r) ++ goto out; ++ ++ ovl->enable(ovl, pi->enabled); ++ ++ if (ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ ++ if (display) { ++ if (display->sync) ++ display->sync(display); ++ ++ if (display->update) ++ display->update(display, 0, 0, ++ display->x_res, display->y_res); ++ } ++ ++out: ++ omapfb_unlock(fbdev); ++ if (r) ++ dev_err(fbdev->dev, "setup_plane failed\n"); ++ return r; ++} ++ ++static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ ++ omapfb_lock(fbdev); ++ ++ if (ofbi->num_overlays != 1) { ++ memset(pi, 0, sizeof(*pi)); ++ } else { ++ struct omap_overlay_info *ovli; ++ struct omap_overlay *ovl; ++ ++ ovl = ofbi->overlays[0]; ++ ovli = &ovl->info; ++ ++ pi->pos_x = ovli->pos_x; ++ pi->pos_y = ovli->pos_y; ++ pi->enabled = ovli->enabled; ++ pi->channel_out = 0; /* xxx */ ++ pi->mirror = 0; ++ pi->out_width = ovli->out_width; ++ pi->out_height = ovli->out_height; ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb_mem_region *rg; ++ int ret = -EINVAL; ++ ++ rg = &ofbi->region; ++ ++ omapfb_lock(fbdev); ++ if (mi->size > rg->size) { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ if (mi->type != rg->type) ++ goto out; ++ ++ ret = 0; ++out: ++ omapfb_unlock(fbdev); ++ ++ return ret; ++} ++ ++static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb_mem_region *rg; ++ ++ rg = &ofbi->region; ++ memset(mi, 0, sizeof(*mi)); ++ ++ omapfb_lock(fbdev); ++ mi->size = rg->size; ++ mi->type = rg->type; ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_update_window(struct fb_info *fbi, ++ u32 x, u32 y, u32 w, u32 h) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ ++ if (!display) ++ return 0; ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ if (x + w > display->x_res || y + h > display->y_res) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ display->update(display, x, y, w, h); ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_set_update_mode(struct fb_info *fbi, ++ enum omapfb_update_mode mode) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ enum omap_dss_update_mode um; ++ int r; ++ ++ if (!display || !display->set_update_mode) ++ return -EINVAL; ++ ++ switch (mode) { ++ case OMAPFB_UPDATE_DISABLED: ++ um = OMAP_DSS_UPDATE_DISABLED; ++ break; ++ ++ case OMAPFB_AUTO_UPDATE: ++ um = OMAP_DSS_UPDATE_AUTO; ++ break; ++ ++ case OMAPFB_MANUAL_UPDATE: ++ um = OMAP_DSS_UPDATE_MANUAL; ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ omapfb_lock(fbdev); ++ r = display->set_update_mode(display, um); ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_get_update_mode(struct fb_info *fbi, ++ enum omapfb_update_mode *mode) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ enum omap_dss_update_mode m; ++ ++ if (!display || !display->get_update_mode) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ m = display->get_update_mode(display); ++ omapfb_unlock(fbdev); ++ ++ switch (m) { ++ case OMAP_DSS_UPDATE_DISABLED: ++ *mode = OMAPFB_UPDATE_DISABLED; ++ break; ++ case OMAP_DSS_UPDATE_AUTO: ++ *mode = OMAPFB_AUTO_UPDATE; ++ break; ++ case OMAP_DSS_UPDATE_MANUAL: ++ *mode = OMAPFB_MANUAL_UPDATE; ++ break; ++ default: ++ BUG(); ++ } ++ ++ return 0; ++} ++ ++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ ++ union { ++ struct omapfb_update_window_old uwnd_o; ++ struct omapfb_update_window uwnd; ++ struct omapfb_plane_info plane_info; ++ struct omapfb_caps caps; ++ struct omapfb_mem_info mem_info; ++ enum omapfb_update_mode update_mode; ++ int test_num; ++ } p; ++ ++ int r = 0; ++ ++ DBG("ioctl %x (%d)\n", cmd, cmd & 0xff); ++ ++ switch (cmd) { ++ case OMAPFB_SYNC_GFX: ++ if (!display || !display->sync) { ++ r = -EINVAL; ++ break; ++ } ++ ++ omapfb_lock(fbdev); ++ r = display->sync(display); ++ omapfb_unlock(fbdev); ++ break; ++ ++ case OMAPFB_UPDATE_WINDOW_OLD: ++ if (!display || !display->update) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (copy_from_user(&p.uwnd_o, ++ (void __user *)arg, ++ sizeof(p.uwnd_o))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y, ++ p.uwnd_o.width, p.uwnd_o.height); ++ break; ++ ++ case OMAPFB_UPDATE_WINDOW: ++ if (!display || !display->update) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (copy_from_user(&p.uwnd, (void __user *)arg, ++ sizeof(p.uwnd))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y, ++ p.uwnd.width, p.uwnd.height); ++ break; ++ ++ case OMAPFB_SETUP_PLANE: ++ if (copy_from_user(&p.plane_info, (void __user *)arg, ++ sizeof(p.plane_info))) ++ r = -EFAULT; ++ else ++ r = omapfb_setup_plane(fbi, &p.plane_info); ++ break; ++ ++ case OMAPFB_QUERY_PLANE: ++ r = omapfb_query_plane(fbi, &p.plane_info); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.plane_info, ++ sizeof(p.plane_info))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SETUP_MEM: ++ if (copy_from_user(&p.mem_info, (void __user *)arg, ++ sizeof(p.mem_info))) ++ r = -EFAULT; ++ else ++ r = omapfb_setup_mem(fbi, &p.mem_info); ++ break; ++ ++ case OMAPFB_QUERY_MEM: ++ r = omapfb_query_mem(fbi, &p.mem_info); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.mem_info, ++ sizeof(p.mem_info))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_GET_CAPS: ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ p.caps.ctrl = display->caps; ++ ++ if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SET_UPDATE_MODE: ++ if (get_user(p.update_mode, (int __user *)arg)) ++ r = -EFAULT; ++ else ++ r = omapfb_set_update_mode(fbi, p.update_mode); ++ break; ++ ++ case OMAPFB_GET_UPDATE_MODE: ++ r = omapfb_get_update_mode(fbi, &p.update_mode); ++ if (r) ++ break; ++ if (put_user(p.update_mode, ++ (enum omapfb_update_mode __user *)arg)) ++ r = -EFAULT; ++ break; ++ ++ /* LCD and CTRL tests do the same thing for backward ++ * compatibility */ ++ case OMAPFB_LCD_TEST: ++ if (get_user(p.test_num, (int __user *)arg)) { ++ r = -EFAULT; ++ break; ++ } ++ if (!display || !display->run_test) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->run_test(display, p.test_num); ++ ++ break; ++ ++ case OMAPFB_CTRL_TEST: ++ if (get_user(p.test_num, (int __user *)arg)) { ++ r = -EFAULT; ++ break; ++ } ++ if (!display || !display->run_test) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->run_test(display, p.test_num); ++ ++ break; ++ ++ default: ++ DBG("ioctl unhandled\n"); ++ r = -EINVAL; ++ } ++ ++ return r; ++} ++ ++ +diff --git a/drivers/video/omap2/omapfb-main.c b/drivers/video/omap2/omapfb-main.c +new file mode 100644 +index 0000000..7ef7080 +--- /dev/null ++++ b/drivers/video/omap2/omapfb-main.c +@@ -0,0 +1,1247 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-main.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/fb.h> ++#include <linux/dma-mapping.h> ++#include <linux/vmalloc.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++ ++#include <mach/display.h> ++#include <mach/omapfb.h> ++ ++#include "omapfb.h" ++ ++#define MODULE_NAME "omapfb" ++ ++#ifdef DEBUG ++static void fill_fb(void *addr, struct fb_info *fbi) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ ++ const short w = var->xres_virtual; ++ const short h = var->yres_virtual; ++ ++ int y, x; ++ u8 *p = addr; ++ ++ for (y = 0; y < h; y++) { ++ for (x = 0; x < w; x++) { ++ if (var->bits_per_pixel == 16) { ++ u16 *pw = (u16 *)p; ++ ++ if (x == 20 || x == w - 20 || ++ y == 20 || y == h - 20) ++ *pw = 0xffff; ++ else if (x == y || w - x == h - y) ++ *pw = ((1<<5)-1)<<11; ++ else if (w - x == y || x == h - y) ++ *pw = ((1<<6)-1)<<5; ++ else { ++ int t = x / (w/3); ++ if (t == 0) ++ *pw = y % 32; ++ else if (t == 1) ++ *pw = (y % 64) << 5; ++ else if (t == 2) ++ *pw = (y % 32) << 11; ++ } ++ } else if (var->bits_per_pixel == 24) { ++ u8 *pb = (u8 *)p; ++ ++ int r = 0, g = 0, b = 0; ++ ++ if (x == 20 || x == w - 20 || ++ y == 20 || y == h - 20) ++ r = g = b = 0xff; ++ else if (x == y || w - x == h - y) ++ r = 0xff; ++ else if (w - x == y || x == h - y) ++ g = 0xff; ++ else { ++ int q = x / (w / 3); ++ u8 base = 255 - (y % 256); ++ if (q == 0) ++ r = base; ++ else if (q == 1) ++ g = base; ++ else if (q == 2) ++ b = base; ++ } ++ ++ pb[0] = b; ++ pb[1] = g; ++ pb[2] = r; ++ ++ } else if (var->bits_per_pixel == 32) { ++ u32 *pd = (u32 *)p; ++ ++ if (x == 20 || x == w - 20 || ++ y == 20 || y == h - 20) ++ *pd = 0xffffff; ++ else if (x == y || w - x == h - y) ++ *pd = 0xff0000; ++ else if (w - x == y || x == h - y) ++ *pd = 0x00ff00; ++ else { ++ u8 base = 255 - (y % 256); ++ *pd = base << ((x / (w/3)) << 3); ++ } ++ } ++ ++ p += var->bits_per_pixel >> 3; ++ } ++ } ++} ++#endif ++ ++static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var) ++{ ++ switch (var->nonstd) { ++ case 0: ++ break; ++ case OMAPFB_COLOR_YUV422: ++ return OMAP_DSS_COLOR_YUV2; ++ ++ case OMAPFB_COLOR_YUY422: ++ return OMAP_DSS_COLOR_UYVY; ++ ++ case OMAPFB_COLOR_ARGB16: ++ return OMAP_DSS_COLOR_ARGB16; ++ ++ case OMAPFB_COLOR_ARGB32: ++ return OMAP_DSS_COLOR_ARGB32; ++ ++ case OMAPFB_COLOR_RGBA32: ++ return OMAP_DSS_COLOR_RGBA32; ++ ++ case OMAPFB_COLOR_RGBX32: ++ return OMAP_DSS_COLOR_RGBX32; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ switch (var->bits_per_pixel) { ++ case 1: ++ return OMAP_DSS_COLOR_CLUT1; ++ case 2: ++ return OMAP_DSS_COLOR_CLUT2; ++ case 4: ++ return OMAP_DSS_COLOR_CLUT4; ++ case 8: ++ return OMAP_DSS_COLOR_CLUT8; ++ case 12: ++ return OMAP_DSS_COLOR_RGB12U; ++ case 16: ++ return OMAP_DSS_COLOR_RGB16; ++ case 24: ++ return OMAP_DSS_COLOR_RGB24P; ++ case 32: ++ return OMAP_DSS_COLOR_RGB24U; ++ default: ++ return -EINVAL; ++ } ++ ++ return -EINVAL; ++} ++ ++static void set_fb_fix(struct fb_info *fbi) ++{ ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct omapfb_mem_region *rg = &FB2OFB(fbi)->region; ++ ++ DBG("set_fb_fix\n"); ++ ++ /* used by open/write in fbmem.c */ ++ fbi->screen_base = (char __iomem *)rg->vaddr; ++ ++ /* used by mmap in fbmem.c */ ++ fix->smem_start = rg->paddr; ++ fix->smem_len = rg->size; ++ ++ fix->type = FB_TYPE_PACKED_PIXELS; ++ ++ if (var->nonstd) ++ fix->visual = FB_VISUAL_PSEUDOCOLOR; ++ else { ++ switch (var->bits_per_pixel) { ++ case 32: ++ case 24: ++ case 16: ++ case 12: ++ fix->visual = FB_VISUAL_TRUECOLOR; ++ /* 12bpp is stored in 16 bits */ ++ break; ++ case 1: ++ case 2: ++ case 4: ++ case 8: ++ fix->visual = FB_VISUAL_PSEUDOCOLOR; ++ break; ++ } ++ } ++ ++ fix->accel = FB_ACCEL_NONE; ++ fix->line_length = (var->xres_virtual * var->bits_per_pixel) >> 3; ++} ++ ++/* check new var and possibly modify it to be ok */ ++static int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omap_display *display = fb2display(fbi); ++ unsigned long max_frame_size; ++ unsigned long line_size; ++ int xres_min, xres_max; ++ int yres_min, yres_max; ++ enum omap_color_mode mode = 0; ++ struct omap_overlay *ovl; ++ ++ DBG("check_fb_var %d\n", ofbi->id); ++ ++ if (ofbi->num_overlays == 0) { ++ dev_err(ofbi->fbdev->dev, "no overlays, aborting\n"); ++ return -EINVAL; ++ } ++ ++ /* XXX: uses the first overlay */ ++ ovl = ofbi->overlays[0]; ++ ++ /* if we are using non standard mode, fix the bpp first */ ++ switch (var->nonstd) { ++ case 0: ++ break; ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUY422: ++ case OMAPFB_COLOR_ARGB16: ++ var->bits_per_pixel = 16; ++ break; ++ case OMAPFB_COLOR_ARGB32: ++ case OMAPFB_COLOR_RGBA32: ++ case OMAPFB_COLOR_RGBX32: ++ var->bits_per_pixel = 32; ++ break; ++ default: ++ DBG("invalid nonstd mode\n"); ++ return -EINVAL; ++ } ++ ++ mode = fb_mode_to_dss_mode(var); ++ if (mode < 0) { ++ DBG("cannot convert var to omap dss mode\n"); ++ return -EINVAL; ++ } ++ ++ if ((ovl->supported_modes & mode) == 0) { ++ DBG("invalid mode\n"); ++ return -EINVAL; ++ } ++ ++ xres_min = OMAPFB_PLANE_XRES_MIN; ++ xres_max = (display ? display->x_res : 2048) - ovl->info.pos_x; ++ yres_min = OMAPFB_PLANE_YRES_MIN; ++ yres_max = (display ? display->y_res : 2048) - ovl->info.pos_y; ++ ++ if (var->xres < xres_min) ++ var->xres = xres_min; ++ if (var->yres < yres_min) ++ var->yres = yres_min; ++ if (var->xres_virtual < var->xres) ++ var->xres_virtual = var->xres; ++ if (var->yres_virtual < var->yres) ++ var->yres_virtual = var->yres; ++ max_frame_size = ofbi->region.size; ++ line_size = (var->xres_virtual * var->bits_per_pixel) >> 3; ++ ++ if (line_size * var->yres_virtual > max_frame_size) { ++ /* Try to keep yres_virtual first */ ++ line_size = max_frame_size / var->yres_virtual; ++ var->xres_virtual = line_size * 8 / var->bits_per_pixel; ++ if (var->xres_virtual < var->xres) { ++ /* Still doesn't fit. Shrink yres_virtual too */ ++ var->xres_virtual = var->xres; ++ line_size = var->xres * var->bits_per_pixel / 8; ++ var->yres_virtual = max_frame_size / line_size; ++ } ++ /* Recheck this, as the virtual size changed. */ ++ if (var->xres_virtual < var->xres) ++ var->xres = var->xres_virtual; ++ if (var->yres_virtual < var->yres) ++ var->yres = var->yres_virtual; ++ if (var->xres < xres_min || var->yres < yres_min) { ++ DBG("Cannot fit FB to memory\n"); ++ return -EINVAL; ++ } ++ } ++ if (var->xres + var->xoffset > var->xres_virtual) ++ var->xoffset = var->xres_virtual - var->xres; ++ if (var->yres + var->yoffset > var->yres_virtual) ++ var->yoffset = var->yres_virtual - var->yres; ++ ++ if (var->bits_per_pixel == 16) { ++ var->red.offset = 11; var->red.length = 5; ++ var->red.msb_right = 0; ++ var->green.offset = 5; var->green.length = 6; ++ var->green.msb_right = 0; ++ var->blue.offset = 0; var->blue.length = 5; ++ var->blue.msb_right = 0; ++ } else if (var->bits_per_pixel == 24) { ++ var->red.offset = 16; var->red.length = 8; ++ var->red.msb_right = 0; ++ var->green.offset = 8; var->green.length = 8; ++ var->green.msb_right = 0; ++ var->blue.offset = 0; var->blue.length = 8; ++ var->blue.msb_right = 0; ++ var->transp.offset = 0; var->transp.length = 0; ++ } else if (var->bits_per_pixel == 32) { ++ var->red.offset = 16; var->red.length = 8; ++ var->red.msb_right = 0; ++ var->green.offset = 8; var->green.length = 8; ++ var->green.msb_right = 0; ++ var->blue.offset = 0; var->blue.length = 8; ++ var->blue.msb_right = 0; ++ var->transp.offset = 0; var->transp.length = 0; ++ } else { ++ DBG("failed to setup fb color mask\n"); ++ return -EINVAL; ++ } ++ ++ DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n", ++ var->xres, var->yres, ++ var->xres_virtual, var->yres_virtual); ++ ++ var->height = -1; ++ var->width = -1; ++ var->grayscale = 0; ++ ++ if (display && display->check_timings) { ++ struct omap_video_timings timings; ++ timings.pixel_clock = PICOS2KHZ(var->pixclock); ++ timings.hfp = var->left_margin; ++ timings.hbp = var->right_margin; ++ timings.vfp = var->upper_margin; ++ timings.vbp = var->lower_margin; ++ timings.hsw = var->hsync_len; ++ timings.vsw = var->vsync_len; ++ ++ if (display->check_timings(display, &timings)) { ++ DBG("illegal video timings\n"); ++ return -EINVAL; ++ } ++ ++ /* pixclock in ps, the rest in pixclock */ ++ var->pixclock = KHZ2PICOS(timings.pixel_clock); ++ var->left_margin = timings.hfp; ++ var->right_margin = timings.hbp; ++ var->upper_margin = timings.vfp; ++ var->lower_margin = timings.vbp; ++ var->hsync_len = timings.hsw; ++ var->vsync_len = timings.vsw; ++ } ++ ++ /* TODO: get these from panel->config */ ++ var->vmode = FB_VMODE_NONINTERLACED; ++ var->sync = 0; ++ ++ return 0; ++} ++ ++/* ++ * --------------------------------------------------------------------------- ++ * fbdev framework callbacks ++ * --------------------------------------------------------------------------- ++ */ ++static int omapfb_open(struct fb_info *fbi, int user) ++{ ++ return 0; ++} ++ ++static int omapfb_release(struct fb_info *fbi, int user) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ ++ DBG("Closing fb with plane index %d\n", ofbi->id); ++ ++ omapfb_lock(fbdev); ++#if 1 ++ if (display) { ++ /* XXX Is this really needed ? */ ++ if (display->sync) ++ display->sync(display); ++ ++ if (display->update) ++ display->update(display, ++ 0, 0, ++ display->x_res, display->y_res); ++ } ++#endif ++ ++ if (display && display->sync) ++ display->sync(display); ++ ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++/* setup overlay according to the fb */ ++int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, ++ int posx, int posy, int outw, int outh) ++{ ++ int r = 0; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_var_screeninfo *var = &fbi->var; ++ enum omap_color_mode mode = 0; ++ int offset; ++ u32 data_start_p; ++ void *data_start_v; ++ ++ DBG("setup_overlay %d\n", ofbi->id); ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 && ++ (outw != var->xres || outh != var->yres)) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ offset = ((var->yoffset * var->xres_virtual + ++ var->xoffset) * var->bits_per_pixel) >> 3; ++ ++ data_start_p = ofbi->region.paddr + offset; ++ data_start_v = ofbi->region.vaddr + offset; ++ ++ mode = fb_mode_to_dss_mode(var); ++ ++ if (mode == -EINVAL) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ r = ovl->setup_input(ovl, ++ data_start_p, data_start_v, ++ var->xres_virtual, ++ var->xres, var->yres, ++ mode); ++ ++ if (r) ++ goto err; ++ ++ r = ovl->setup_output(ovl, ++ posx, posy, ++ outw, outh); ++ ++ if (r) ++ goto err; ++ ++ return 0; ++ ++err: ++ DBG("setup_overlay failed\n"); ++ return r; ++} ++ ++/* apply var to the overlay */ ++int omapfb_apply_changes(struct fb_info *fbi, int init) ++{ ++ int r = 0; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_var_screeninfo *var = &fbi->var; ++ /*struct omap_display *display = fb2display(fbi);*/ ++ struct omap_overlay *ovl; ++ int posx, posy; ++ int outw, outh; ++ int i; ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ ovl = ofbi->overlays[i]; ++ ++ DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); ++ ++ if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { ++ outw = var->xres; ++ outh = var->yres; ++ } else { ++ outw = ovl->info.out_width; ++ outh = ovl->info.out_height; ++ } ++ ++ if (init) { ++ posx = 0; ++ posy = 0; ++ } else { ++ posx = ovl->info.pos_x; ++ posy = ovl->info.pos_y; ++ } ++ ++ r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh); ++ if (r) ++ goto err; ++ ++ /* disabled for now. if the display has changed, var ++ * still contains the old timings. */ ++#if 0 ++ if (display && display->set_timings) { ++ struct omap_video_timings timings; ++ timings.pixel_clock = PICOS2KHZ(var->pixclock); ++ timings.hfp = var->left_margin; ++ timings.hbp = var->right_margin; ++ timings.vfp = var->upper_margin; ++ timings.vbp = var->lower_margin; ++ timings.hsw = var->hsync_len; ++ timings.vsw = var->vsync_len; ++ ++ display->set_timings(display, &timings); ++ } ++#endif ++ if (!init && ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ } ++ return 0; ++err: ++ DBG("apply_changes failed\n"); ++ return r; ++} ++ ++/* checks var and eventually tweaks it to something supported, ++ * DO NOT MODIFY PAR */ ++static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) ++{ ++ int r; ++ ++ DBG("check_var(%d)\n", FB2OFB(fbi)->id); ++ ++ r = check_fb_var(fbi, var); ++ ++ return r; ++} ++ ++/* set the video mode according to info->var */ ++static int omapfb_set_par(struct fb_info *fbi) ++{ ++ int r; ++ ++ DBG("set_par(%d)\n", FB2OFB(fbi)->id); ++ ++ set_fb_fix(fbi); ++ r = omapfb_apply_changes(fbi, 0); ++ ++ return r; ++} ++ ++static void omapfb_rotate(struct fb_info *fbi, int rotate) ++{ ++ DBG("rotate(%d)\n", FB2OFB(fbi)->id); ++ return; ++} ++ ++static int omapfb_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *fbi) ++{ ++ DBG("pan_display(%d)\n", FB2OFB(fbi)->id); ++ return 0; ++} ++ ++static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb_mem_region *rg = &ofbi->region; ++ ++ return dma_mmap_writecombine(fbdev->dev, vma, ++ rg->vaddr, ++ rg->paddr, ++ rg->size); ++} ++ ++/* Store a single color palette entry into a pseudo palette or the hardware ++ * palette if one is available. For now we support only 16bpp and thus store ++ * the entry only to the pseudo palette. ++ */ ++static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, ++ u_int blue, u_int transp, int update_hw_pal) ++{ ++ /*struct omapfb_info *ofbi = FB2OFB(fbi);*/ ++ /*struct omapfb2_device *fbdev = ofbi->fbdev;*/ ++ struct fb_var_screeninfo *var = &fbi->var; ++ int r = 0; ++ ++ enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */ ++ ++ /*switch (plane->color_mode) {*/ ++ switch (mode) { ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUV420: ++ case OMAPFB_COLOR_YUY422: ++ r = -EINVAL; ++ break; ++ case OMAPFB_COLOR_CLUT_8BPP: ++ case OMAPFB_COLOR_CLUT_4BPP: ++ case OMAPFB_COLOR_CLUT_2BPP: ++ case OMAPFB_COLOR_CLUT_1BPP: ++ /* ++ if (fbdev->ctrl->setcolreg) ++ r = fbdev->ctrl->setcolreg(regno, red, green, blue, ++ transp, update_hw_pal); ++ */ ++ /* Fallthrough */ ++ r = -EINVAL; ++ break; ++ case OMAPFB_COLOR_RGB565: ++ case OMAPFB_COLOR_RGB444: ++ case OMAPFB_COLOR_RGB24P: ++ case OMAPFB_COLOR_RGB24U: ++ if (r != 0) ++ break; ++ ++ if (regno < 0) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (regno < 16) { ++ u16 pal; ++ pal = ((red >> (16 - var->red.length)) << ++ var->red.offset) | ++ ((green >> (16 - var->green.length)) << ++ var->green.offset) | ++ (blue >> (16 - var->blue.length)); ++ ((u32 *)(fbi->pseudo_palette))[regno] = pal; ++ } ++ break; ++ default: ++ BUG(); ++ } ++ return r; ++} ++ ++static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, ++ u_int transp, struct fb_info *info) ++{ ++ DBG("setcolreg\n"); ++ ++ return _setcolreg(info, regno, red, green, blue, transp, 1); ++} ++ ++static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) ++{ ++ int count, index, r; ++ u16 *red, *green, *blue, *transp; ++ u16 trans = 0xffff; ++ ++ DBG("setcmap\n"); ++ ++ red = cmap->red; ++ green = cmap->green; ++ blue = cmap->blue; ++ transp = cmap->transp; ++ index = cmap->start; ++ ++ for (count = 0; count < cmap->len; count++) { ++ if (transp) ++ trans = *transp++; ++ r = _setcolreg(info, index++, *red++, *green++, *blue++, trans, ++ count == cmap->len - 1); ++ if (r != 0) ++ return r; ++ } ++ ++ return 0; ++} ++ ++static int omapfb_blank(int blank, struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ int do_update = 0; ++ int r = 0; ++ ++ omapfb_lock(fbdev); ++ ++ switch (blank) { ++ case VESA_NO_BLANKING: ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) { ++ r = -EINVAL; ++ goto exit; ++ } ++ ++ if (display->resume) ++ r = display->resume(display); ++ ++ if (r == 0 && display->get_update_mode && ++ display->get_update_mode(display) == ++ OMAP_DSS_UPDATE_MANUAL) ++ do_update = 1; ++ ++ break; ++ ++ case VESA_POWERDOWN: ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) { ++ r = -EINVAL; ++ goto exit; ++ } ++ ++ if (display->suspend) ++ r = display->suspend(display); ++ ++ break; ++ ++ default: ++ r = -EINVAL; ++ } ++ ++exit: ++ omapfb_unlock(fbdev); ++ ++ if (r == 0 && do_update && display->update) ++ r = display->update(display, ++ 0, 0, ++ display->x_res, display->y_res); ++ ++ return r; ++} ++ ++static struct fb_ops omapfb_ops = { ++ .owner = THIS_MODULE, ++ .fb_open = omapfb_open, ++ .fb_release = omapfb_release, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++ .fb_blank = omapfb_blank, ++ .fb_ioctl = omapfb_ioctl, ++ .fb_check_var = omapfb_check_var, ++ .fb_set_par = omapfb_set_par, ++ .fb_rotate = omapfb_rotate, ++ .fb_pan_display = omapfb_pan_display, ++ .fb_mmap = omapfb_mmap, ++ .fb_setcolreg = omapfb_setcolreg, ++ .fb_setcmap = omapfb_setcmap, ++}; ++ ++static int omapfb_free_fbmem(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ DBG("free fbmem\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ struct omapfb_mem_region *rg; ++ ++ rg = &ofbi->region; ++ ++ if (rg->alloc) { ++ dma_free_writecombine(fbdev->dev, rg->size, ++ rg->vaddr, rg->paddr); ++ } ++ ++ rg->vaddr = NULL; ++ rg->paddr = 0; ++ rg->alloc = 0; ++ } ++ ++ fbdev->num_fbs = 0; ++ ++ return 0; ++} ++ ++static int omapfb_allocate_fbmem(struct omapfb2_device *fbdev) ++{ ++ int i; ++ struct omapfb_mem_desc *plat_mem_desc; ++ struct omapfb_platform_data *pdata = fbdev->dev->platform_data; ++ ++ plat_mem_desc = &pdata->mem_desc; ++ ++ DBG("omapfb: setup mem regions, %d regions\n", ++ plat_mem_desc->region_cnt); ++ ++ for (i = 0; i < plat_mem_desc->region_cnt; i++) { ++ struct omapfb_mem_region *plat_rg; ++ struct omapfb_mem_region *rg; ++ struct omapfb_info *ofb_info = FB2OFB(fbdev->fbs[i]); ++ ++ plat_rg = &plat_mem_desc->region[i]; ++ rg = &ofb_info->region; ++ ++ memset(rg, 0, sizeof(*rg)); ++ ++ DBG("platform region%d phys %08x virt %p size=%lu\n", ++ i, ++ plat_rg->paddr, ++ plat_rg->vaddr, ++ plat_rg->size); ++ ++ if (plat_rg->paddr == 0) { ++ u32 paddr; ++ void *vaddr; ++ ++ vaddr = dma_alloc_writecombine(fbdev->dev, ++ plat_rg->size, ++ &paddr, GFP_KERNEL); ++ ++ if (vaddr == NULL) { ++ dev_err(fbdev->dev, ++ "failed to allocate framebuffer\n"); ++ return -ENOMEM; ++ } ++ ++ rg->paddr = paddr; ++ rg->vaddr = vaddr; ++ rg->size = plat_rg->size; ++ rg->alloc = 1; ++ } else { ++ dev_err(fbdev->dev, ++ "Using preallocated fb not supported\n"); ++ return -EINVAL; ++ } ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofb_info = FB2OFB(fbdev->fbs[i]); ++ struct omapfb_mem_region *rg; ++ rg = &ofb_info->region; ++ ++ DBG("region%d phys %08x virt %p size=%lu\n", ++ i, ++ rg->paddr, ++ rg->vaddr, ++ rg->size); ++ } ++ ++ return 0; ++} ++ ++/* initialize fb_info, var, fix to something sane based on the display */ ++static int fbinfo_init(struct omapfb2_device *fbdev, struct fb_info *fbi) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ struct omap_display *display = fb2display(fbi); ++ int r = 0; ++ ++ if (!display) { ++ dev_err(fbdev->dev, "cannot fbinfo_init, no display\n"); ++ return -EINVAL; ++ } ++ ++ fbi->fbops = &omapfb_ops; ++ fbi->flags = FBINFO_FLAG_DEFAULT; ++ fbi->pseudo_palette = fbdev->pseudo_palette; ++ ++ strncpy(fix->id, MODULE_NAME, sizeof(fix->id)); ++ ++ var->xres = display->x_res; ++ var->yres = display->y_res; ++ var->xres_virtual = var->xres; ++ var->yres_virtual = var->yres; ++ /* var->rotate = def_rotate; */ ++ ++ var->nonstd = 0; ++ ++ switch (display->bpp) { ++ case 16: ++ var->bits_per_pixel = 16; ++ break; ++ case 18: ++ var->bits_per_pixel = 16; ++ break; ++ case 24: ++ var->bits_per_pixel = 32; ++ break; ++ default: ++ dev_err(fbdev->dev, "illegal display bpp\n"); ++ return -EINVAL; ++ } ++ ++ if (display->get_timings) { ++ struct omap_video_timings timings; ++ display->get_timings(display, &timings); ++ ++ /* pixclock in ps, the rest in pixclock */ ++ var->pixclock = KHZ2PICOS(timings.pixel_clock); ++ var->left_margin = timings.hfp; ++ var->right_margin = timings.hbp; ++ var->upper_margin = timings.vfp; ++ var->lower_margin = timings.vbp; ++ var->hsync_len = timings.hsw; ++ var->vsync_len = timings.vsw; ++ } else { ++ var->pixclock = 0; ++ var->left_margin = 0; ++ var->right_margin = 0; ++ var->upper_margin = 0; ++ var->lower_margin = 0; ++ var->hsync_len = 0; ++ var->vsync_len = 0; ++ } ++ ++ r = check_fb_var(fbi, var); ++ if (r) ++ goto err; ++ ++ set_fb_fix(fbi); ++ ++#ifdef DEBUG ++ fill_fb(FB2OFB(fbi)->region.vaddr, fbi); ++#endif ++err: ++ return r; ++} ++ ++static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi) ++{ ++ fb_dealloc_cmap(&fbi->cmap); ++} ++ ++ ++static void omapfb_free_resources(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ DBG("free_resources\n"); ++ ++ if (fbdev == NULL) ++ return; ++ ++ for (i = 0; i < fbdev->num_fbs; i++) ++ unregister_framebuffer(fbdev->fbs[i]); ++ ++ /* free the reserved fbmem */ ++ omapfb_free_fbmem(fbdev); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ fbinfo_cleanup(fbdev, fbdev->fbs[i]); ++ framebuffer_release(fbdev->fbs[i]); ++ } ++ ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED) ++ fbdev->displays[i]->disable(fbdev->displays[i]); ++ ++ omap_dss_put_display(fbdev->displays[i]); ++ } ++ ++ dev_set_drvdata(fbdev->dev, NULL); ++ kfree(fbdev); ++} ++ ++static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) ++{ ++ int r; ++ int i; ++ struct omapfb_mem_desc *plat_mem_desc; ++ struct omapfb_platform_data *pdata = fbdev->dev->platform_data; ++ ++ plat_mem_desc = &pdata->mem_desc; ++ ++ fbdev->num_fbs = 0; ++ ++ DBG("create %d framebuffers\n", plat_mem_desc->region_cnt); ++ ++ /* allocate fb_infos */ ++ for (i = 0; i < plat_mem_desc->region_cnt; i++) { ++ struct fb_info *fbi; ++ struct omapfb_info *ofbi; ++ ++ fbi = framebuffer_alloc(sizeof(struct omapfb_info), ++ fbdev->dev); ++ ++ if (fbi == NULL) { ++ dev_err(fbdev->dev, ++ "unable to allocate memory for plane info\n"); ++ return -ENOMEM; ++ } ++ ++ fbdev->fbs[i] = fbi; ++ ++ ofbi = FB2OFB(fbi); ++ ofbi->fbdev = fbdev; ++ /* XXX here we presume we have enough overlays */ ++ ofbi->overlays[0] = fbdev->overlays[i]; ++ ofbi->num_overlays = 1; ++ ofbi->id = i; ++ fbdev->num_fbs++; ++ } ++ ++ DBG("fb_infos allocated\n"); ++ ++ /* allocate fb memories */ ++ r = omapfb_allocate_fbmem(fbdev); ++ if (r) { ++ dev_err(fbdev->dev, "failed to allocate fbmem\n"); ++ return r; ++ } ++ ++ DBG("fbmems allocated\n"); ++ ++ /* setup fb_infos */ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = fbinfo_init(fbdev, fbdev->fbs[i]); ++ if (r) { ++ dev_err(fbdev->dev, "failed to setup fb_info\n"); ++ return r; ++ } ++ } ++ ++ DBG("fb_infos initialized\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = register_framebuffer(fbdev->fbs[i]); ++ if (r != 0) { ++ dev_err(fbdev->dev, ++ "registering framebuffer %d failed\n", i); ++ return r; ++ } ++ } ++ ++ DBG("framebuffers registered\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = omapfb_apply_changes(fbdev->fbs[i], 1); ++ if (r) ++ dev_err(fbdev->dev, "failed to change mode\n"); ++ } ++ ++ /* Enable the first framebuffer that has overlay that is connected ++ * to display. Usually this would be the GFX plane. */ ++ r = 0; ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ int t; ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ struct omap_overlay *ovl = ofbi->overlays[t]; ++ if (ovl->manager && ovl->manager->display) { ++ ovl->enable(ovl, 1); ++ r = 1; ++ break; ++ } ++ } ++ ++ if (r) ++ break; ++ } ++ ++ DBG("create_framebuffers done\n"); ++ ++ return 0; ++} ++ ++static int omapfb_probe(struct platform_device *pdev) ++{ ++ struct omapfb2_device *fbdev = NULL; ++ int r = 0; ++ int i, t; ++ struct omap_overlay *ovl; ++ struct omap_display *def_display; ++ ++ DBG("omapfb_probe\n"); ++ ++ if (pdev->num_resources != 0) { ++ dev_err(&pdev->dev, "probed for an unknown device\n"); ++ r = -ENODEV; ++ goto err0; ++ } ++ ++ if (pdev->dev.platform_data == NULL) { ++ dev_err(&pdev->dev, "missing platform data\n"); ++ r = -ENOENT; ++ goto err0; ++ } ++ ++ fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL); ++ if (fbdev == NULL) { ++ r = -ENOMEM; ++ goto err0; ++ } ++ ++ mutex_init(&fbdev->mtx); ++ ++ fbdev->dev = &pdev->dev; ++ platform_set_drvdata(pdev, fbdev); ++ ++ fbdev->num_displays = 0; ++ t = omap_dss_get_num_displays(); ++ for (i = 0; i < t; i++) { ++ struct omap_display *display; ++ display = omap_dss_get_display(i); ++ if (!display) { ++ dev_err(&pdev->dev, "can't get display %d\n", i); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ fbdev->displays[fbdev->num_displays++] = display; ++ } ++ ++ if (fbdev->num_displays == 0) { ++ dev_err(&pdev->dev, "no displays\n"); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ fbdev->num_overlays = omap_dss_get_num_overlays(); ++ for (i = 0; i < fbdev->num_overlays; i++) ++ fbdev->overlays[i] = omap_dss_get_overlay(i); ++ ++ fbdev->num_managers = omap_dss_get_num_overlay_managers(); ++ for (i = 0; i < fbdev->num_managers; i++) ++ fbdev->managers[i] = omap_dss_get_overlay_manager(i); ++ ++ ++ /* gfx overlay should be the default one. find a display ++ * connected to that, and use it as default display */ ++ ovl = omap_dss_get_overlay(0); ++ if (ovl->manager && ovl->manager->display) { ++ def_display = ovl->manager->display; ++ } else { ++ dev_err(&pdev->dev, "cannot find default display\n"); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ r = omapfb_create_framebuffers(fbdev); ++ if (r) ++ goto cleanup; ++ ++ for (i = 0; i < fbdev->num_managers; i++) { ++ struct omap_overlay_manager *mgr; ++ mgr = fbdev->managers[i]; ++ r = mgr->apply(mgr); ++ if (r) { ++ dev_err(fbdev->dev, "failed to apply dispc config\n"); ++ goto cleanup; ++ } ++ } ++ ++ DBG("mgr->apply'ed\n"); ++ ++ r = def_display->enable(def_display); ++ if (r) { ++ dev_err(fbdev->dev, "Failed to enable display '%s'\n", ++ def_display->name); ++ goto cleanup; ++ } ++ ++ /* set the update mode */ ++ if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { ++#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_AUTO); ++ if (def_display->enable_te) ++ def_display->enable_te(def_display, 1); ++#else ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_MANUAL); ++ if (def_display->enable_te) ++ def_display->enable_te(def_display, 0); ++#endif ++ } else { ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_AUTO); ++ } ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ struct omap_display *display = fbdev->displays[i]; ++ ++ if (display->update) ++ display->update(display, ++ 0, 0, ++ display->x_res, display->y_res); ++ } ++ ++ DBG("display->updated\n"); ++ ++ omapfb_create_sysfs(fbdev); ++ DBG("sysfs created\n"); ++ ++ return 0; ++ ++cleanup: ++ omapfb_free_resources(fbdev); ++err0: ++ dev_err(&pdev->dev, "failed to setup omapfb\n"); ++ return r; ++} ++ ++static int omapfb_remove(struct platform_device *pdev) ++{ ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ++ /* FIXME: wait till completion of pending events */ ++ ++ omapfb_remove_sysfs(fbdev); ++ ++ omapfb_free_resources(fbdev); ++ ++ return 0; ++} ++ ++static struct platform_driver omapfb_driver = { ++ .probe = omapfb_probe, ++ .remove = omapfb_remove, ++ .driver = { ++ .name = "omapfb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init omapfb_init(void) ++{ ++ DBG("omapfb_init\n"); ++ ++ if (platform_driver_register(&omapfb_driver)) { ++ printk(KERN_ERR "failed to register omapfb driver\n"); ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++ ++static void __exit omapfb_exit(void) ++{ ++ DBG("omapfb_exit\n"); ++ platform_driver_unregister(&omapfb_driver); ++} ++ ++/* late_initcall to let panel/ctrl drivers loaded first. ++ * I guess better option would be a more dynamic approach, ++ * so that omapfb reacts to new panels when they are loaded */ ++late_initcall(omapfb_init); ++/*module_init(omapfb_init);*/ ++module_exit(omapfb_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); ++MODULE_DESCRIPTION("OMAP2/3 Framebuffer"); ++MODULE_LICENSE("GPL v2"); +diff --git a/drivers/video/omap2/omapfb-sysfs.c b/drivers/video/omap2/omapfb-sysfs.c +new file mode 100644 +index 0000000..e01edd1 +--- /dev/null ++++ b/drivers/video/omap2/omapfb-sysfs.c +@@ -0,0 +1,833 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-sysfs.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/fb.h> ++#include <linux/sysfs.h> ++#include <linux/device.h> ++#include <linux/uaccess.h> ++#include <linux/platform_device.h> ++ ++#include <mach/display.h> ++#include <mach/omapfb.h> ++ ++#include "omapfb.h" ++ ++static int omapfb_attach_framebuffer(struct fb_info *fbi, ++ struct omap_overlay *ovl) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ int i, t; ++ int r; ++ ++ if (ofbi->num_overlays >= OMAPFB_MAX_OVL_PER_FB) { ++ dev_err(fbdev->dev, "fb has max number of overlays already\n"); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i] == ovl) { ++ dev_err(fbdev->dev, "fb already attached to overlay\n"); ++ return -EINVAL; ++ } ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]); ++ for (t = 0; t < ofbi2->num_overlays; t++) { ++ if (ofbi2->overlays[t] == ovl) { ++ dev_err(fbdev->dev, "overlay already in use\n"); ++ return -EINVAL; ++ } ++ } ++ } ++ ++ ofbi->overlays[ofbi->num_overlays++] = ovl; ++ ++/* ++ if (ovl->manager && ovl->manager->display) ++ omapfb_adjust_fb(fbi, ovl, 0, 0); ++*/ ++ r = omapfb_apply_changes(fbi, 1); ++ if (r) ++ return r; ++ ++ if (ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ ++ return 0; ++} ++ ++static int omapfb_detach_framebuffer(struct fb_info *fbi, ++ struct omap_overlay *ovl) ++{ ++ int i; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i] == ovl) ++ break; ++ } ++ ++ if (i == ofbi->num_overlays) { ++ dev_err(fbdev->dev, "cannot detach fb, overlay not attached\n"); ++ return -EINVAL; ++ } ++ ++ ovl->enable(ovl, 0); ++ ++ if (ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ ++ for (i = i + 1; i < ofbi->num_overlays; i++) ++ ofbi->overlays[i-1] = ofbi->overlays[i]; ++ ++ ofbi->num_overlays--; ++ ++ return 0; ++} ++ ++ ++static ssize_t show_framebuffers(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ssize_t l = 0, size = PAGE_SIZE; ++ int i, t; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ ++ l += snprintf(buf + l, size - l, "%d t:", ofbi->id); ++ ++ if (ofbi->num_overlays == 0) ++ l += snprintf(buf + l, size - l, "none"); ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ struct omap_overlay *ovl; ++ ovl = ofbi->overlays[t]; ++ ++ l += snprintf(buf + l, size - l, "%s%s", ++ t == 0 ? "" : ",", ++ ovl->name); ++ } ++ ++ l += snprintf(buf + l, size - l, "\n"); ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static struct omap_overlay *find_overlay_by_name(struct omapfb2_device *fbdev, ++ char *name) ++{ ++ int i; ++ ++ for (i = 0; i < fbdev->num_overlays; i++) ++ if (strcmp(name, fbdev->overlays[i]->name) == 0) ++ return fbdev->overlays[i]; ++ ++ return NULL; ++} ++ ++static struct omap_display *find_display_by_name(struct omapfb2_device *fbdev, ++ char *name) ++{ ++ int i; ++ ++ for (i = 0; i < fbdev->num_displays; i++) ++ if (strcmp(name, fbdev->displays[i]->name) == 0) ++ return fbdev->displays[i]; ++ ++ return NULL; ++} ++ ++static struct omap_overlay_manager *find_manager_by_name( ++ struct omapfb2_device *fbdev, ++ char *name) ++{ ++ int i; ++ ++ for (i = 0; i < fbdev->num_managers; i++) ++ if (strcmp(name, fbdev->managers[i]->name) == 0) ++ return fbdev->managers[i]; ++ ++ return NULL; ++} ++ ++static int parse_overlays(struct omapfb2_device *fbdev, char *str, ++ struct omap_overlay *ovls[]) ++{ ++ int num_ovls = 0; ++ int s, e = 0; ++ char ovlname[10]; ++ ++ while (1) { ++ struct omap_overlay *ovl; ++ ++ s = e; ++ ++ while (e < strlen(str) && str[e] != ',') ++ e++; ++ ++ strncpy(ovlname, str + s, e - s); ++ ovlname[e-s] = 0; ++ ++ DBG("searching for '%s'\n", ovlname); ++ ovl = find_overlay_by_name(fbdev, ovlname); ++ ++ if (ovl) { ++ DBG("found an overlay\n"); ++ ovls[num_ovls] = ovl; ++ num_ovls++; ++ } else { ++ DBG("unknown overlay %s\n", str); ++ return 0; ++ } ++ ++ if (e == strlen(str)) ++ break; ++ ++ e++; ++ } ++ ++ return num_ovls; ++} ++ ++static ssize_t store_framebuffers(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ int idx; ++ char fbname[3]; ++ unsigned long fbnum; ++ char ovlnames[40]; ++ int num_ovls = 0; ++ struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB]; ++ struct fb_info *fbi; ++ struct omapfb_info *ofbi; ++ int r, i; ++ ++ idx = 0; ++ while (idx < count && buf[idx] != ' ') ++ ++idx; ++ ++ if (idx == count) ++ return -EINVAL; ++ ++ if (idx >= sizeof(fbname)) ++ return -EINVAL; ++ ++ strncpy(fbname, buf, idx); ++ fbname[idx] = 0; ++ idx++; ++ ++ if (strict_strtoul(fbname, 10, &fbnum)) ++ return -EINVAL; ++ ++ r = sscanf(buf + idx, "t:%39s", ovlnames); ++ ++ if (r != 1) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ omapfb_lock(fbdev); ++ ++ if (fbnum >= fbdev->num_fbs) { ++ dev_err(dev, "fb not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ fbi = fbdev->fbs[fbnum]; ++ ofbi = FB2OFB(fbi); ++ ++ if (strcmp(ovlnames, "none") == 0) { ++ num_ovls = 0; ++ } else { ++ num_ovls = parse_overlays(fbdev, ovlnames, ovls); ++ ++ if (num_ovls == 0) { ++ dev_err(dev, "overlays not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ } ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ r = omapfb_detach_framebuffer(fbi, ofbi->overlays[i]); ++ if (r) { ++ dev_err(dev, "detach failed\n"); ++ goto err; ++ } ++ } ++ ++ if (num_ovls > 0) { ++ for (i = 0; i < num_ovls; i++) { ++ r = omapfb_attach_framebuffer(fbi, ovls[i]); ++ if (r) { ++ dev_err(dev, "attach failed\n"); ++ goto err; ++ } ++ } ++ } ++ ++ omapfb_unlock(fbdev); ++ return count; ++ ++err: ++ omapfb_unlock(fbdev); ++ return r; ++} ++ ++static ssize_t show_overlays(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ssize_t l = 0, size = PAGE_SIZE; ++ int i, mgr_num; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < fbdev->num_overlays; i++) { ++ struct omap_overlay *ovl; ++ struct omap_overlay_manager *mgr; ++ ++ ovl = fbdev->overlays[i]; ++ mgr = ovl->manager; ++ ++ for (mgr_num = 0; mgr_num < fbdev->num_managers; mgr_num++) ++ if (fbdev->managers[mgr_num] == mgr) ++ break; ++ ++ l += snprintf(buf + l, size - l, ++ "%s t:%s x:%d y:%d iw:%d ih:%d w: %d h: %d e:%d\n", ++ ovl->name, ++ mgr ? mgr->name : "none", ++ ovl->info.pos_x, ++ ovl->info.pos_y, ++ ovl->info.width, ++ ovl->info.height, ++ ovl->info.out_width, ++ ovl->info.out_height, ++ ovl->info.enabled); ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static ssize_t store_overlays(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ int idx; ++ struct omap_overlay *ovl = NULL; ++ struct omap_overlay_manager *mgr; ++ int r; ++ char ovlname[10]; ++ int posx, posy, outw, outh; ++ int enabled; ++ ++ idx = 0; ++ while (idx < count && buf[idx] != ' ') ++ ++idx; ++ ++ if (idx == count) ++ return -EINVAL; ++ ++ if (idx >= sizeof(ovlname)) ++ return -EINVAL; ++ ++ strncpy(ovlname, buf, idx); ++ ovlname[idx] = 0; ++ idx++; ++ ++ omapfb_lock(fbdev); ++ ++ ovl = find_overlay_by_name(fbdev, ovlname); ++ ++ if (!ovl) { ++ dev_err(dev, "ovl not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ DBG("ovl %s found\n", ovl->name); ++ ++ mgr = ovl->manager; ++ ++ posx = ovl->info.pos_x; ++ posy = ovl->info.pos_y; ++ outw = ovl->info.out_width; ++ outh = ovl->info.out_height; ++ enabled = ovl->info.enabled; ++ ++ while (idx < count) { ++ char c; ++ int val; ++ int len; ++ char sval[10]; ++ ++ r = sscanf(buf + idx, "%c:%d%n", &c, &val, &len); ++ ++ if (r != 2) { ++ val = 0; ++ ++ r = sscanf(buf + idx, "%c:%9s%n", &c, sval, &len); ++ ++ if (r != 2) { ++ dev_err(dev, "sscanf failed, aborting\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ } else { ++ sval[0] = 0; ++ } ++ ++ switch (c) { ++ case 't': ++ if (strcmp(sval, "none") == 0) { ++ mgr = NULL; ++ } else { ++ mgr = find_manager_by_name(fbdev, sval); ++ ++ if (mgr == NULL) { ++ dev_err(dev, "no such manager\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ DBG("manager %s found\n", mgr->name); ++ } ++ ++ break; ++ ++ case 'x': ++ posx = val; ++ break; ++ ++ case 'y': ++ posy = val; ++ break; ++ ++ case 'w': ++ if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) ++ outw = val; ++ break; ++ ++ case 'h': ++ if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) ++ outh = val; ++ break; ++ ++ case 'e': ++ enabled = val; ++ break; ++ ++ default: ++ dev_err(dev, "unknown option %c\n", c); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ idx += len + 1; ++ } ++ ++ r = ovl->setup_output(ovl, posx, posy, outw, outh); ++ ++ if (r) { ++ dev_err(dev, "setup overlay failed\n"); ++ goto err; ++ } ++ ++ if (mgr != ovl->manager) { ++ /* detach old manager */ ++ if (ovl->manager) { ++ r = ovl->unset_manager(ovl); ++ if (r) { ++ dev_err(dev, "detach failed\n"); ++ goto err; ++ } ++ } ++ ++ if (mgr) { ++ r = ovl->set_manager(ovl, mgr); ++ if (r) { ++ dev_err(dev, "Failed to attach overlay\n"); ++ goto err; ++ } ++ } ++ } ++ ++ r = ovl->enable(ovl, enabled); ++ ++ if (r) { ++ dev_err(dev, "enable overlay failed\n"); ++ goto err; ++ } ++ ++ if (mgr) { ++ r = mgr->apply(mgr); ++ if (r) { ++ dev_err(dev, "failed to apply dispc config\n"); ++ goto err; ++ } ++ } else { ++ ovl->enable(ovl, 0); ++ } ++ ++ if (mgr && mgr->display && mgr->display->update) ++ mgr->display->update(mgr->display, ++ 0, 0, ++ mgr->display->x_res, mgr->display->y_res); ++ ++ omapfb_unlock(fbdev); ++ return count; ++ ++err: ++ omapfb_unlock(fbdev); ++ return r; ++} ++ ++static ssize_t show_managers(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ssize_t l = 0, size = PAGE_SIZE; ++ int i; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < fbdev->num_managers; i++) { ++ struct omap_display *display; ++ struct omap_overlay_manager *mgr; ++ ++ mgr = fbdev->managers[i]; ++ display = mgr->display; ++ ++ l += snprintf(buf + l, size - l, "%s t:%s\n", ++ mgr->name, display ? display->name : "none"); ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static ssize_t store_managers(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ int idx; ++ struct omap_overlay_manager *mgr; ++ struct omap_display *display; ++ char mgrname[10]; ++ char displayname[10]; ++ int r; ++ ++ idx = 0; ++ while (idx < count && buf[idx] != ' ') ++ ++idx; ++ ++ if (idx == count) ++ return -EINVAL; ++ ++ if (idx >= sizeof(mgrname)) ++ return -EINVAL; ++ ++ strncpy(mgrname, buf, idx); ++ mgrname[idx] = 0; ++ idx++; ++ ++ omapfb_lock(fbdev); ++ ++ mgr = find_manager_by_name(fbdev, mgrname); ++ ++ if (!mgr) { ++ dev_err(dev, "manager not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ r = sscanf(buf + idx, "t:%9s", displayname); ++ ++ if (r != 1) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ if (strcmp(displayname, "none") == 0) { ++ display = NULL; ++ } else { ++ display = find_display_by_name(fbdev, displayname); ++ ++ if (!display) { ++ dev_err(dev, "display not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ } ++ ++ if (mgr->display) { ++ r = mgr->unset_display(mgr); ++ if (r) { ++ dev_err(dev, "failed to unset display\n"); ++ goto err; ++ } ++ } ++ ++ if (display) { ++ r = mgr->set_display(mgr, display); ++ if (r) { ++ dev_err(dev, "failed to set manager\n"); ++ goto err; ++ } ++ ++ r = mgr->apply(mgr); ++ if (r) { ++ dev_err(dev, "failed to apply dispc config\n"); ++ goto err; ++ } ++ } ++ ++ omapfb_unlock(fbdev); ++ return count; ++ ++err: ++ omapfb_unlock(fbdev); ++ return r; ++} ++ ++static ssize_t show_displays(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ssize_t l = 0, size = PAGE_SIZE; ++ int i; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ struct omap_display *display; ++ enum omap_dss_update_mode mode = -1; ++ int te = 0; ++ ++ display = fbdev->displays[i]; ++ ++ if (display->get_update_mode) ++ mode = display->get_update_mode(display); ++ ++ if (display->get_te) ++ te = display->get_te(display); ++ ++ l += snprintf(buf + l, size - l, ++ "%s w:%d h:%d e:%d u:%d t:%d\n", ++ display->name, ++ display->x_res, ++ display->y_res, ++ display->state != OMAP_DSS_DISPLAY_DISABLED, ++ mode, te); ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static ssize_t store_displays(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ int idx; ++ int enable, width, height; ++ enum omap_dss_update_mode mode; ++ struct omap_display *display = NULL; ++ int r; ++ char displayname[10]; ++ int te; ++ ++ idx = 0; ++ while (idx < count && buf[idx] != ' ') ++ ++idx; ++ ++ if (idx == count) ++ return -EINVAL; ++ ++ if (idx >= sizeof(displayname)) ++ return -EINVAL; ++ ++ strncpy(displayname, buf, idx); ++ displayname[idx] = 0; ++ idx++; ++ ++ omapfb_lock(fbdev); ++ ++ display = find_display_by_name(fbdev, displayname); ++ ++ if (!display) { ++ dev_err(dev, "display not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ width = display->x_res; ++ height = display->y_res; ++ enable = display->state != OMAP_DSS_DISPLAY_DISABLED; ++ if (display->get_update_mode) ++ mode = display->get_update_mode(display); ++ else ++ mode = 0; ++ ++ if (display->get_te) ++ te = display->get_te(display); ++ else ++ te = 0; ++ ++ while (idx < count) { ++ char c; ++ int val; ++ int len; ++ ++ r = sscanf(buf + idx, "%c:%d%n", &c, &val, &len); ++ ++ if (r != 2) { ++ dev_err(dev, "sscanf failed, aborting\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ switch (c) { ++ case 'w': ++ width = val; ++ break; ++ ++ case 'h': ++ height = val; ++ break; ++ ++ case 'e': ++ enable = val; ++ break; ++ ++ case 'u': ++ mode = val; ++ break; ++ ++ case 't': ++ te = val; ++ break; ++ ++ default: ++ dev_err(dev, "unknown option %c\n", c); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ idx += len + 1; ++ } ++ ++ /* XXX: setmode */ ++ if (enable != (display->state != OMAP_DSS_DISPLAY_DISABLED)) { ++ if (enable) { ++ r = display->enable(display); ++ if (r) ++ dev_err(dev, "failed to enable display\n"); ++ } else { ++ display->disable(display); ++ } ++ } ++ ++ if (display->set_update_mode && display->get_update_mode) { ++ if (mode != display->get_update_mode(display)) ++ display->set_update_mode(display, mode); ++ } ++ ++ if (display->enable_te && display->get_te) { ++ if (te != display->get_te(display)) ++ display->enable_te(display, te); ++ } ++ ++ omapfb_unlock(fbdev); ++ return count; ++ ++err: ++ omapfb_unlock(fbdev); ++ return r; ++} ++ ++ ++static DEVICE_ATTR(framebuffers, S_IRUGO | S_IWUSR, ++ show_framebuffers, store_framebuffers); ++static DEVICE_ATTR(overlays, S_IRUGO | S_IWUSR, ++ show_overlays, store_overlays); ++static DEVICE_ATTR(managers, S_IRUGO | S_IWUSR, ++ show_managers, store_managers); ++static DEVICE_ATTR(displays, S_IRUGO | S_IWUSR, ++ show_displays, store_displays); ++ ++static struct attribute *omapfb_attrs[] = { ++ &dev_attr_framebuffers.attr, ++ &dev_attr_overlays.attr, ++ &dev_attr_managers.attr, ++ &dev_attr_displays.attr, ++ NULL, ++}; ++ ++static struct attribute_group omapfb_attr_group = { ++ .attrs = omapfb_attrs, ++}; ++ ++void omapfb_create_sysfs(struct omapfb2_device *fbdev) ++{ ++ int r; ++ ++ r = sysfs_create_group(&fbdev->dev->kobj, &omapfb_attr_group); ++ if (r) ++ dev_err(fbdev->dev, "failed to create sysfs clk file\n"); ++} ++ ++void omapfb_remove_sysfs(struct omapfb2_device *fbdev) ++{ ++ sysfs_remove_group(&fbdev->dev->kobj, &omapfb_attr_group); ++} ++ +diff --git a/drivers/video/omap2/omapfb.h b/drivers/video/omap2/omapfb.h +new file mode 100644 +index 0000000..04ca444 +--- /dev/null ++++ b/drivers/video/omap2/omapfb.h +@@ -0,0 +1,104 @@ ++/* ++ * linux/drivers/video/omap2/omapfb.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ ++#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ ++ ++#ifdef CONFIG_FB_OMAP2_DEBUG ++#define DEBUG ++#endif ++ ++#ifdef DEBUG ++#define DBG(format, ...) printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par)) ++ ++/* max number of overlays to which a framebuffer data can be direct */ ++#define OMAPFB_MAX_OVL_PER_FB 3 ++ ++/* appended to fb_info */ ++struct omapfb_info { ++ int id; ++ struct omapfb_mem_region region; ++ int num_overlays; ++ struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; ++ struct omapfb2_device *fbdev; ++}; ++ ++struct omapfb2_device { ++ struct device *dev; ++ struct mutex mtx; ++ ++ u32 pseudo_palette[17]; ++ ++ int state; ++ ++ int num_fbs; ++ struct fb_info *fbs[10]; ++ ++ int num_displays; ++ struct omap_display *displays[10]; ++ int num_overlays; ++ struct omap_overlay *overlays[10]; ++ int num_managers; ++ struct omap_overlay_manager *managers[10]; ++}; ++ ++int omapfb_apply_changes(struct fb_info *fbi, int init); ++int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, ++ int posx, int posy, int outw, int outh); ++ ++void omapfb_create_sysfs(struct omapfb2_device *fbdev); ++void omapfb_remove_sysfs(struct omapfb2_device *fbdev); ++ ++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg); ++ ++/* find the display connected to this fb, if any */ ++static inline struct omap_display *fb2display(struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int i; ++ ++ /* XXX: returns the display connected to first attached overlay */ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->manager) ++ return ofbi->overlays[i]->manager->display; ++ } ++ ++ return NULL; ++} ++ ++static inline void omapfb_lock(struct omapfb2_device *fbdev) ++{ ++ mutex_lock(&fbdev->mtx); ++} ++ ++static inline void omapfb_unlock(struct omapfb2_device *fbdev) ++{ ++ mutex_unlock(&fbdev->mtx); ++} ++ ++ ++#endif +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0009-DSS-Add-generic-DVI-panel.patch b/packages/linux/linux-omap/0009-DSS-Add-generic-DVI-panel.patch new file mode 100644 index 0000000000..26a7999abe --- /dev/null +++ b/packages/linux/linux-omap/0009-DSS-Add-generic-DVI-panel.patch @@ -0,0 +1,189 @@ +From e62e58fbb6adfb288da56c949bdb6211c695a263 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Mon, 20 Oct 2008 13:12:33 +0300 +Subject: [PATCH] DSS: Add generic DVI panel + +For some reason we can't allocate enough mem for 1280x1024x24bpp, even if +there should be enough continuous mem. So 1280x1024 mode defaults to +16bpp for now. + +You also need DSI PLL to generate pix clock for 1280x1024. + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + drivers/video/omap2/Kconfig | 20 +++++++ + drivers/video/omap2/Makefile | 2 + + drivers/video/omap2/panel-dvi.c | 121 +++++++++++++++++++++++++++++++++++++++ + 3 files changed, 143 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/omap2/panel-dvi.c + +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +index 4b72479..4584e1b 100644 +--- a/drivers/video/omap2/Kconfig ++++ b/drivers/video/omap2/Kconfig +@@ -24,6 +24,26 @@ config FB_OMAP2_FORCE_AUTO_UPDATE + menu "OMAP2/3 Display Device Drivers" + depends on OMAP2_DSS + ++config PANEL_DVI ++ tristate "DVI Panel" ++ help ++ DVI output, for Beagle and OMAP3 SDP ++ ++choice ++ prompt "Default DVI Mode" ++ depends on PANEL_DVI ++ default PANEL_DVI_HIGHRES ++ ++config PANEL_DVI_LOWRES ++ bool "800 x 600 @ 60" ++ ++config PANEL_DVI_HIGHRES ++ bool "1024 x 768 @ 60" ++ ++config PANEL_DVI_VERYHIGHRES ++ bool "1280 x 1024 @ 57" ++ ++endchoice + + endmenu + +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +index 51c2e00..7c75340 100644 +--- a/drivers/video/omap2/Makefile ++++ b/drivers/video/omap2/Makefile +@@ -1,2 +1,4 @@ + obj-$(CONFIG_FB_OMAP2) += omapfb.o + omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o ++ ++obj-$(CONFIG_PANEL_DVI) += panel-dvi.o +diff --git a/drivers/video/omap2/panel-dvi.c b/drivers/video/omap2/panel-dvi.c +new file mode 100644 +index 0000000..2d053df +--- /dev/null ++++ b/drivers/video/omap2/panel-dvi.c +@@ -0,0 +1,121 @@ ++/* ++ * DVI panel support ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++ ++#include <mach/display.h> ++ ++static int dvi_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static int dvi_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void dvi_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++} ++ ++static struct omap_panel dvi_panel = { ++ .owner = THIS_MODULE, ++ .name = "panel-dvi", ++ .init = dvi_panel_init, ++ /*.remove = dvi_cleanup, */ ++ .enable = dvi_panel_enable, ++ .disable = dvi_panel_disable, ++ /*.set_mode = dvi_set_mode, */ ++ ++#if defined(CONFIG_PANEL_DVI_LOWRES) ++ .timings = { ++ /* 800 x 600 @ 60 Hz Reduced blanking VESA CVT 0.48M3-R */ ++ .pixel_clock = 35500, ++ .hfp = 48, ++ .hsw = 32, ++ .hbp = 80, ++ .vfp = 3, ++ .vsw = 4, ++ .vbp = 11, ++ }, ++ ++ .x_res = 800, ++ .y_res = 600, ++ .bpp = 24, ++#elif defined(CONFIG_PANEL_DVI_HIGHRES) ++ .timings = { ++ /* 1024 x 768 @ 60 Hz Reduced blanking */ ++ .pixel_clock = 56000, ++ .hfp = 48, ++ .hsw = 32, ++ .hbp = 80, ++ .vfp = 3, ++ .vsw = 4, ++ .vbp = 15, ++ }, ++ ++ .x_res = 1024, ++ .y_res = 768, ++ .bpp = 24, ++#elif defined(CONFIG_PANEL_DVI_VERYHIGHRES) ++ .timings = { ++ /* 1280 x 1024 @ 57 Hz Reduced blanking */ ++ .pixel_clock = 86500, ++ .hfp = 48, ++ .hsw = 32, ++ .hbp = 80, ++ .vfp = 3, ++ .vsw = 4, ++ .vbp = 15, ++ }, ++ ++ .x_res = 1280, ++ .y_res = 1024, ++ .bpp = 16, ++#else ++#error Undefined default mode ++#endif ++ ++ .config = OMAP_DSS_LCD_TFT, ++}; ++ ++ ++static int __init dvi_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&dvi_panel); ++ return 0; ++} ++ ++static void __exit dvi_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&dvi_panel); ++} ++ ++module_init(dvi_panel_drv_init); ++module_exit(dvi_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0010-DSS-support-for-Beagle-Board.patch b/packages/linux/linux-omap/0010-DSS-support-for-Beagle-Board.patch new file mode 100644 index 0000000000..ee93a32dde --- /dev/null +++ b/packages/linux/linux-omap/0010-DSS-support-for-Beagle-Board.patch @@ -0,0 +1,182 @@ +From 25b99d79100db8142de061954704fdabd76672d2 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Mon, 29 Sep 2008 17:03:36 +0300 +Subject: [PATCH] DSS: support for Beagle Board + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + arch/arm/mach-omap2/board-omap3beagle.c | 121 +++++++++++++++++++++++++++---- + 1 files changed, 108 insertions(+), 13 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index ce6c7b4..a6fe63d 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -42,6 +42,8 @@ + #include <mach/gpmc.h> + #include <mach/nand.h> + #include <mach/mux.h> ++#include <mach/omapfb.h> ++#include <mach/display.h> + + #include "twl4030-generic-scripts.h" + +@@ -186,15 +188,6 @@ static void __init omap3_beagle_init_irq(void) + omap_gpio_init(); + } + +-static struct platform_device omap3_beagle_lcd_device = { +- .name = "omap3beagle_lcd", +- .id = -1, +-}; +- +-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { +- .ctrl_name = "internal", +-}; +- + static struct gpio_led gpio_leds[] = { + { + .name = "beagleboard::usr0", +@@ -248,13 +241,114 @@ static struct platform_device keys_gpio = { + }, + }; + ++/* DSS */ ++ ++static int beagle_enable_dvi(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 1); ++ ++ return 0; ++} ++ ++static void beagle_disable_dvi(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 0); ++} ++ ++static struct omap_display_data beagle_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-dvi", ++ .u.dpi.data_lines = 24, ++ .panel_reset_gpio = 170, ++ .panel_enable = beagle_enable_dvi, ++ .panel_disable = beagle_disable_dvi, ++}; ++ ++ ++static int panel_enable_tv(struct omap_display *display) ++{ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ ++ return 0; ++} ++ ++static void panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_display_data beagle_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = panel_enable_tv, ++ .panel_disable = panel_disable_tv, ++}; ++ ++static struct omap_dss_platform_data beagle_dss_data = { ++ .num_displays = 2, ++ .displays = { ++ &beagle_display_data_dvi, ++ &beagle_display_data_tv, ++ } ++}; ++ ++static struct platform_device beagle_dss_device = { ++ .name = "omap-dss", ++ .id = -1, ++ .dev = { ++ .platform_data = &beagle_dss_data, ++ }, ++}; ++ ++static void __init beagle_display_init(void) ++{ ++ int r; ++ ++ r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset GPIO"); ++ if(r < 0) { ++ printk(KERN_ERR "Unable to get DVI reset GPIO\n"); ++ } ++} ++ ++static struct omap_fbmem_config beagle_fbmem0_config = { ++ .size = 1024*768*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; ++ ++static struct omap_fbmem_config beagle_fbmem1_config = { ++ .size = 1024*768*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; ++ ++static struct omap_fbmem_config beagle_fbmem2_config = { ++ .size = 1024*768*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; ++ ++ + static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { + { OMAP_TAG_UART, &omap3_beagle_uart_config }, +- { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, ++ { OMAP_TAG_FBMEM, &beagle_fbmem0_config }, ++ { OMAP_TAG_FBMEM, &beagle_fbmem1_config }, ++ { OMAP_TAG_FBMEM, &beagle_fbmem2_config }, + }; + + static struct platform_device *omap3_beagle_devices[] __initdata = { +- &omap3_beagle_lcd_device, ++ &beagle_dss_device, + &leds_gpio, + &keys_gpio, + }; +@@ -302,8 +396,6 @@ static void __init omap3_beagle_init(void) + omap3_beagle_i2c_init(); + platform_add_devices(omap3_beagle_devices, + ARRAY_SIZE(omap3_beagle_devices)); +- omap_board_config = omap3_beagle_config; +- omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); + omap_serial_init(); + + omap_cfg_reg(AH8_34XX_GPIO29); +@@ -319,10 +411,13 @@ static void __init omap3_beagle_init(void) + usb_musb_init(); + usb_ehci_init(); + omap3beagle_flash_init(); ++ beagle_display_init(); + } + + static void __init omap3_beagle_map_io(void) + { ++ omap_board_config = omap3_beagle_config; ++ omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); + omap2_set_globals_343x(); + omap2_map_common_io(); + } +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0011-DSS-support-for-OMAP3-SDP-board.patch b/packages/linux/linux-omap/0011-DSS-support-for-OMAP3-SDP-board.patch new file mode 100644 index 0000000000..1e23a192b1 --- /dev/null +++ b/packages/linux/linux-omap/0011-DSS-support-for-OMAP3-SDP-board.patch @@ -0,0 +1,441 @@ +From 69302d06679f25f940f5ee3cb8c51c1becf46e52 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Date: Mon, 20 Oct 2008 13:13:15 +0300 +Subject: [PATCH] DSS: support for OMAP3 SDP board + +Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> +--- + arch/arm/mach-omap2/board-3430sdp.c | 234 +++++++++++++++++++++++++++++++++-- + drivers/video/omap2/Kconfig | 7 +- + drivers/video/omap2/Makefile | 1 + + drivers/video/omap2/panel-sdp3430.c | 110 ++++++++++++++++ + 4 files changed, 340 insertions(+), 12 deletions(-) + create mode 100644 drivers/video/omap2/panel-sdp3430.c + +diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c +index 8773698..b910bc6 100644 +--- a/arch/arm/mach-omap2/board-3430sdp.c ++++ b/arch/arm/mach-omap2/board-3430sdp.c +@@ -40,6 +40,8 @@ + #include <mach/keypad.h> + #include <mach/dma.h> + #include <mach/gpmc.h> ++#include <mach/omapfb.h> ++#include <mach/display.h> + + #include <asm/io.h> + #include <asm/delay.h> +@@ -239,14 +241,224 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { + }, + }; + +-static struct platform_device sdp3430_lcd_device = { +- .name = "sdp2430_lcd", +- .id = -1, ++static struct omap_fbmem_config sdp3430_fbmem0_config = { ++ .size = 1024*768*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; ++ ++static struct omap_fbmem_config sdp3430_fbmem1_config = { ++ .size = 640*480*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, + }; + ++static struct omap_fbmem_config sdp3430_fbmem2_config = { ++ .size = 640*480*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; ++ ++ ++#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 ++#define SDP2430_LCD_PANEL_ENABLE_GPIO 154 ++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24 ++#define SDP3430_LCD_PANEL_ENABLE_GPIO 28 ++ ++#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER ++#define ENABLE_VAUX2_DEDICATED 0x09 ++#define ENABLE_VAUX2_DEV_GRP 0x20 ++#define ENABLE_VAUX3_DEDICATED 0x03 ++#define ENABLE_VAUX3_DEV_GRP 0x20 ++ ++#define ENABLE_VPLL2_DEDICATED 0x05 ++#define ENABLE_VPLL2_DEV_GRP 0xE0 ++#define TWL4030_VPLL2_DEV_GRP 0x33 ++#define TWL4030_VPLL2_DEDICATED 0x36 ++ ++#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) ++ ++static unsigned backlight_gpio; ++static unsigned enable_gpio; ++static int lcd_enabled; ++static int dvi_enabled; ++ ++static void __init display_init(void) ++{ ++ int r; ++ ++ enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; ++ backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; ++ ++ r = gpio_request(enable_gpio, "OMAP SDP LCD Reset GPIO"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD reset GPIO\n"); ++ goto err0; ++ } ++ ++ r = gpio_request(backlight_gpio, "OMAP SDP LCD Backlight GPIO"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD backlight GPIO\n"); ++ goto err1; ++ } ++ ++ gpio_direction_output(enable_gpio, 0); ++ gpio_direction_output(backlight_gpio, 0); ++ ++ return; ++err1: ++ gpio_free(enable_gpio); ++err0: ++ return; ++} ++ ++ ++static int panel_enable_lcd(struct omap_display *display) ++{ ++ u8 ded_val, ded_reg; ++ u8 grp_val, grp_reg; ++ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ ++ if (system_rev > OMAP3430_REV_ES1_0) { ++ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED, ++ TWL4030_VPLL2_DEDICATED); ++ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ ++ ded_reg = TWL4030_VAUX3_DEDICATED; ++ ded_val = ENABLE_VAUX3_DEDICATED; ++ grp_reg = TWL4030_VAUX3_DEV_GRP; ++ grp_val = ENABLE_VAUX3_DEV_GRP; ++ ++ gpio_direction_output(enable_gpio, 1); ++ gpio_direction_output(backlight_gpio, 1); ++ ++ if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg)) ++ return -EIO; ++ if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg)) ++ return -EIO; ++ ++ lcd_enabled = 1; ++ ++ return 0; ++} ++ ++static void panel_disable_lcd(struct omap_display *display) ++{ ++ lcd_enabled = 0; ++ ++ gpio_direction_output(enable_gpio, 0); ++ gpio_direction_output(backlight_gpio, 0); ++ ++ if (system_rev > OMAP3430_REV_ES1_0) { ++ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED); ++ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP); ++ mdelay(4); ++ } ++} ++ ++static struct omap_display_data sdp_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd", ++ .panel_name = "panel-sdp3430", ++ .u.dpi.data_lines = 16, ++ .panel_enable = panel_enable_lcd, ++ .panel_disable = panel_disable_lcd, ++}; ++ ++static int panel_enable_dvi(struct omap_display *display) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ ++ if (system_rev > OMAP3430_REV_ES1_0) { ++ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED, ++ TWL4030_VPLL2_DEDICATED); ++ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void panel_disable_dvi(struct omap_display *display) ++{ ++ dvi_enabled = 0; ++ ++ if (system_rev > OMAP3430_REV_ES1_0) { ++ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED); ++ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP); ++ mdelay(4); ++ } ++} ++ ++ ++static struct omap_display_data sdp_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-dvi", ++ .u.dpi.data_lines = 24, ++ .panel_enable = panel_enable_dvi, ++ .panel_disable = panel_disable_dvi, ++}; ++ ++static int panel_enable_tv(struct omap_display *display) ++{ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ ++ return 0; ++} ++ ++static void panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_display_data sdp_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = panel_enable_tv, ++ .panel_disable = panel_disable_tv, ++}; ++ ++static struct omap_dss_platform_data sdp3430_dss_data = { ++ .num_displays = 3, ++ .displays = { ++ &sdp_display_data, ++ &sdp_display_data_dvi, ++ &sdp_display_data_tv, ++ } ++}; ++ ++static struct platform_device sdp3430_dss_device = { ++ .name = "omap-dss", ++ .id = -1, ++ .dev = { ++ .platform_data = &sdp3430_dss_data, ++ }, ++}; ++ ++ + static struct platform_device *sdp3430_devices[] __initdata = { + &sdp3430_smc91x_device, +- &sdp3430_lcd_device, ++ &sdp3430_dss_device, + }; + + static inline void __init sdp3430_init_smc91x(void) +@@ -293,13 +505,11 @@ static struct omap_uart_config sdp3430_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), + }; + +-static struct omap_lcd_config sdp3430_lcd_config __initdata = { +- .ctrl_name = "internal", +-}; +- + static struct omap_board_config_kernel sdp3430_config[] __initdata = { + { OMAP_TAG_UART, &sdp3430_uart_config }, +- { OMAP_TAG_LCD, &sdp3430_lcd_config }, ++ { OMAP_TAG_FBMEM, &sdp3430_fbmem0_config }, ++ { OMAP_TAG_FBMEM, &sdp3430_fbmem1_config }, ++ { OMAP_TAG_FBMEM, &sdp3430_fbmem2_config }, + }; + + static int sdp3430_batt_table[] = { +@@ -450,8 +660,6 @@ static void __init omap_3430sdp_init(void) + { + omap3430_i2c_init(); + platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); +- omap_board_config = sdp3430_config; +- omap_board_config_size = ARRAY_SIZE(sdp3430_config); + if (system_rev > OMAP3430_REV_ES1_0) + ts_gpio = OMAP34XX_TS_GPIO_IRQ_SDPV2; + else +@@ -466,10 +674,14 @@ static void __init omap_3430sdp_init(void) + usb_musb_init(); + usb_ehci_init(); + hsmmc_init(); ++ display_init(); + } + + static void __init omap_3430sdp_map_io(void) + { ++ omap_board_config = sdp3430_config; ++ omap_board_config_size = ARRAY_SIZE(sdp3430_config); ++ + omap2_set_globals_343x(); + omap2_map_common_io(); + } +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +index 4584e1b..95691ad 100644 +--- a/drivers/video/omap2/Kconfig ++++ b/drivers/video/omap2/Kconfig +@@ -45,5 +45,10 @@ config PANEL_DVI_VERYHIGHRES + + endchoice + +-endmenu ++config PANEL_SDP3430 ++ tristate "SDP3430 Panel" ++ depends on OMAP2_DSS ++ help ++ SDP3430 LCD + ++endmenu +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +index 7c75340..73ab1c0 100644 +--- a/drivers/video/omap2/Makefile ++++ b/drivers/video/omap2/Makefile +@@ -2,3 +2,4 @@ obj-$(CONFIG_FB_OMAP2) += omapfb.o + omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o + + obj-$(CONFIG_PANEL_DVI) += panel-dvi.o ++obj-$(CONFIG_PANEL_SDP3430) += panel-sdp3430.o +diff --git a/drivers/video/omap2/panel-sdp3430.c b/drivers/video/omap2/panel-sdp3430.c +new file mode 100644 +index 0000000..40fe6f2 +--- /dev/null ++++ b/drivers/video/omap2/panel-sdp3430.c +@@ -0,0 +1,110 @@ ++/* ++ * LCD panel support for the TI 3430SDP board ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Derived from drivers/video/omap/lcd_2430sdp.c ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++ ++#include <mach/display.h> ++ ++static int sdp3430_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static void sdp3430_panel_cleanup(struct omap_display *display) ++{ ++} ++ ++static int sdp3430_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void sdp3430_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++} ++ ++static int sdp3430_panel_suspend(struct omap_display *display) ++{ ++ sdp3430_panel_disable(display); ++ return 0; ++} ++ ++static int sdp3430_panel_resume(struct omap_display *display) ++{ ++ return sdp3430_panel_enable(display); ++} ++ ++static struct omap_panel sdp3430_panel = { ++ .owner = THIS_MODULE, ++ .name = "panel-sdp3430", ++ .init = sdp3430_panel_init, ++ .cleanup = sdp3430_panel_cleanup, ++ .enable = sdp3430_panel_enable, ++ .disable = sdp3430_panel_disable, ++ .suspend = sdp3430_panel_suspend, ++ .resume = sdp3430_panel_resume, ++ /*.set_mode = sdp3430_set_mode, */ ++ ++ .timings = { ++ .pixel_clock = 19200, ++ ++ .hsw = 4, ++ .hfp = 4, ++ .hbp = 40, ++ ++ .vsw = 2, ++ .vfp = 1, ++ .vbp = 1, ++ }, ++ ++ .acb = 0x28, ++ ++ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC, ++ ++ .x_res = 480, ++ .y_res = 640, ++ .bpp = 16, ++}; ++ ++ ++static int __init sdp3430_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&sdp3430_panel); ++ return 0; ++} ++ ++static void __exit sdp3430_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&sdp3430_panel); ++} ++ ++module_init(sdp3430_panel_drv_init); ++module_exit(sdp3430_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/beagleboard/defconfig b/packages/linux/linux-omap/beagleboard/defconfig index 1344060446..56dea7e122 100644 --- a/packages/linux/linux-omap/beagleboard/defconfig +++ b/packages/linux/linux-omap/beagleboard/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-omap1 -# Sun Oct 26 10:27:59 2008 +# Linux kernel version: 2.6.28-rc3-omap1 +# Sat Nov 8 08:59:05 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -80,6 +79,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -89,15 +89,9 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,6 +124,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -170,7 +165,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set # # TI OMAP Implementations @@ -203,6 +198,14 @@ CONFIG_OMAP_DM_TIMER=y # CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_DSS_DEBUG=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 CONFIG_ARCH_OMAP34XX=y CONFIG_ARCH_OMAP3430=y @@ -267,26 +270,30 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=128 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_LEDS=y CONFIG_ALIGNMENT_TRAP=y @@ -301,7 +308,7 @@ CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y # -# CPU Frequency scaling +# CPU Power Management # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y @@ -318,6 +325,7 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -335,6 +343,8 @@ CONFIG_NEON=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=y @@ -342,9 +352,12 @@ CONFIG_BINFMT_MISC=y # Power management options # CONFIG_PM=y -# CONFIG_PM_DEBUG is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -416,6 +429,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -459,12 +473,11 @@ CONFIG_BT_HCIBPA10X=y # CONFIG_BT_HCIH4P is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y CONFIG_CFG80211=y CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=y @@ -473,10 +486,13 @@ CONFIG_MAC80211=y # Rate control algorithm selection # CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set @@ -570,6 +586,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set @@ -686,6 +703,7 @@ CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m # CONFIG_LIBERTAS_SDIO is not set # CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set CONFIG_USB_ZD1201=m CONFIG_USB_NET_RNDIS_WLAN=m CONFIG_RTL8187=m @@ -701,14 +719,13 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set CONFIG_RT2X00=m -CONFIG_RT2X00_LIB=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y -CONFIG_RT2500USB=m -CONFIG_RT2500USB_LEDS=y -CONFIG_RT73USB=m -CONFIG_RT73USB_LEDS=y # CONFIG_RT2X00_DEBUG is not set # @@ -722,6 +739,7 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_CDCETHER=y CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SMSC95XX is not set CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m @@ -790,6 +808,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -984,6 +1003,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1006,6 +1026,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_TSC210X is not set CONFIG_SENSORS_OMAP34XX=y # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -1040,6 +1062,9 @@ CONFIG_TWL4030_POWER=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -1081,6 +1106,7 @@ CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_MSP3400=m CONFIG_VIDEO_CS53L32A=m @@ -1093,8 +1119,8 @@ CONFIG_VIDEO_CX2341X=m # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_AU0828 is not set +# CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y @@ -1123,12 +1149,10 @@ CONFIG_USB_PWC=m CONFIG_USB_ZR364XX=m # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_TEA5761 is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_TTPCI_EEPROM is not set @@ -1158,11 +1182,12 @@ CONFIG_DVB_USB_OPERA1=m CONFIG_DVB_USB_AF9005=m CONFIG_DVB_USB_AF9005_REMOTE=m # CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set # CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_CINERGYT2=m -# CONFIG_DVB_CINERGYT2_TUNING is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -1186,6 +1211,8 @@ CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_MT312=m CONFIG_DVB_S5H1420=m +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set CONFIG_DVB_STV0299=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m @@ -1193,6 +1220,8 @@ CONFIG_DVB_VES1X93=m CONFIG_DVB_TUNER_ITD1000=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TUA6100=m +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1245,6 +1274,13 @@ CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_LNBP21=m # CONFIG_DVB_ISL6405 is not set CONFIG_DVB_ISL6421=m +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set # CONFIG_DAB is not set # @@ -1255,6 +1291,7 @@ CONFIG_DVB_ISL6421=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1275,11 +1312,19 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -CONFIG_FB_OMAP=y -CONFIG_FB_OMAP_VIDEO_MODE="1024x768@60" -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set -# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=8 +# CONFIG_FB_METRONOME is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_DVI=y +# CONFIG_PANEL_DVI_LOWRES is not set +CONFIG_PANEL_DVI_HIGHRES=y +# CONFIG_PANEL_DVI_VERYHIGHRES is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1307,6 +1352,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1331,11 +1377,6 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_ARM=y -# CONFIG_SND_OMAP_AIC23 is not set -# CONFIG_SND_OMAP_TSC2101 is not set -# CONFIG_SND_SX1 is not set -# CONFIG_SND_OMAP_TSC2102 is not set -# CONFIG_SND_OMAP24XX_EAC is not set CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=y @@ -1343,9 +1384,7 @@ CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_MCBSP=y -CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y -CONFIG_SND_SOC_TWL4030=y +# CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1356,9 +1395,36 @@ CONFIG_HID_DEBUG=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1378,6 +1444,8 @@ CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1389,6 +1457,7 @@ CONFIG_USB_MON=y # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y @@ -1411,6 +1480,7 @@ CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1507,6 +1577,7 @@ CONFIG_USB_SERIAL_DEBUG=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m @@ -1523,23 +1594,27 @@ CONFIG_USB_LED=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y -# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -1556,7 +1631,7 @@ CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y @@ -1564,11 +1639,13 @@ CONFIG_SDIO_UART=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set CONFIG_MMC_OMAP_HS=y CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1588,6 +1665,7 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1629,17 +1707,21 @@ CONFIG_RTC_DRV_TWL4030=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1669,11 +1751,13 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1718,6 +1802,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1772,6 +1857,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1852,7 +1938,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -1884,15 +1970,23 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1906,6 +2000,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -1916,10 +2011,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1993,14 +2090,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/packages/linux/linux-omap/fix-clkrate-programming.diff b/packages/linux/linux-omap/fix-clkrate-programming.diff new file mode 100644 index 0000000000..10369d4200 --- /dev/null +++ b/packages/linux/linux-omap/fix-clkrate-programming.diff @@ -0,0 +1,57 @@ +From: Paul Walmsley <paul@pwsan.com> +Date: Fri, 17 Oct 2008 22:18:42 +0000 (-0600) +Subject: OMAP3 clock: fix non-CORE DPLL rate assignment bugs +X-Git-Tag: v2.6.27-omap1~8 +X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftmlind%2Flinux-omap-2.6.git;a=commitdiff_plain;h=2ac1da8c787f73f067e717408e631501ba60aabc + +OMAP3 clock: fix non-CORE DPLL rate assignment bugs + +Commit 8b1f0bd44fe490ec631230c8c040753a2bda8caa introduced a bug that +caused non-CORE DPLL rates to be incorrectly set on boot in +omap3_noncore_dpll_enable(). Debugged by Tomi Valkeinen +<tomi.valkeinen@nokia.com> - thanks Tomi. + +Also fix omap3_noncore_dpll_set_rate() to assign clk->rate after a +DPLL reprogram. + +Tested on 3430SDP. + +Signed-off-by: Paul Walmsley <paul@pwsan.com> +Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com> +Cc: Rick Bronson <rick@efn.org> +Cc: Timo Kokkonen <timo.t.kokkonen@nokia.com> +Cc: Sakari Poussa <sakari.poussa@nokia.com> +Signed-off-by: Tony Lindgren <tony@atomide.com> +--- + +diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c +index df258f7..cc43f4f 100644 +--- a/arch/arm/mach-omap2/clock34xx.c ++++ b/arch/arm/mach-omap2/clock34xx.c +@@ -271,7 +271,6 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) + static int omap3_noncore_dpll_enable(struct clk *clk) + { + int r; +- long rate; + struct dpll_data *dd; + + if (clk == &dpll3_ck) +@@ -287,7 +286,7 @@ static int omap3_noncore_dpll_enable(struct clk *clk) + r = _omap3_noncore_dpll_lock(clk); + + if (!r) +- clk->rate = rate; ++ clk->rate = omap2_get_dpll_rate(clk); + + return r; + } +@@ -430,6 +429,9 @@ static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) + ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, + dd->last_rounded_n, freqsel); + ++ if (!ret) ++ clk->rate = rate; ++ + } + + omap3_dpll_recalc(clk); diff --git a/packages/linux/linux-omap/mru-add-clk-get-parent.diff b/packages/linux/linux-omap/mru-add-clk-get-parent.diff index 64944a5e47..4488b311a0 100644 --- a/packages/linux/linux-omap/mru-add-clk-get-parent.diff +++ b/packages/linux/linux-omap/mru-add-clk-get-parent.diff @@ -1,20 +1,21 @@ +From 2414b5ac7596904dd8951619316b63d644f544db Mon Sep 17 00:00:00 2001 From: Mans Rullgard <mans@mansr.com> -Date: Fri, 29 Aug 2008 01:51:36 +0000 (+0100) -Subject: OMAP: Add clk_get_parent() for OMAP2/3 -X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=08d1f1947a5a970b2fe6e4dfeeb70286b9379056 - -OMAP: Add clk_get_parent() for OMAP2/3 - -This makes clk_get_parent() work on OMAP2/3. +Date: Tue, 22 Jul 2008 01:58:18 +0100 +Subject: [PATCH] ARM: OMAP: add clk_get_parent() for OMAP2/3 Signed-off-by: Mans Rullgard <mans@mansr.com> --- + arch/arm/mach-omap2/clock.c | 5 +++++ + arch/arm/mach-omap2/clock.h | 1 + + arch/arm/mach-omap2/clock24xx.c | 1 + + arch/arm/mach-omap2/clock34xx.c | 1 + + 4 files changed, 8 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c -index 5f48e14..aae0d2e 100644 +index c3af24e..9e502a0 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c -@@ -831,6 +831,11 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) +@@ -817,6 +817,11 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) return 0; } @@ -27,7 +28,7 @@ index 5f48e14..aae0d2e 100644 /** diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h -index 3fa2e26..2916879 100644 +index bcb0c03..a5183d0 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -29,6 +29,7 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate); @@ -39,10 +40,10 @@ index 3fa2e26..2916879 100644 #ifdef CONFIG_OMAP_RESET_CLOCKS void omap2_clk_disable_unused(struct clk *clk); diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c -index c26d9d8..f91bd57 100644 +index a54f10f..4382e60 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c -@@ -423,6 +423,7 @@ static struct clk_functions omap2_clk_functions = { +@@ -416,6 +416,7 @@ static struct clk_functions omap2_clk_functions = { .clk_round_rate = omap2_clk_round_rate, .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, @@ -51,10 +52,10 @@ index c26d9d8..f91bd57 100644 #ifdef CONFIG_CPU_FREQ .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c -index 152d095..2196edd 100644 +index cc43f4f..2a1a6b1 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c -@@ -606,6 +606,7 @@ static struct clk_functions omap2_clk_functions = { +@@ -635,6 +635,7 @@ static struct clk_functions omap2_clk_functions = { .clk_round_rate = omap2_clk_round_rate, .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, @@ -62,3 +63,6 @@ index 152d095..2196edd 100644 .clk_disable_unused = omap2_clk_disable_unused, }; +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/mru-make-dpll4-m4-ck-programmable.diff b/packages/linux/linux-omap/mru-make-dpll4-m4-ck-programmable.diff index 0a535c5d52..85f9cc3129 100644 --- a/packages/linux/linux-omap/mru-make-dpll4-m4-ck-programmable.diff +++ b/packages/linux/linux-omap/mru-make-dpll4-m4-ck-programmable.diff @@ -1,22 +1,20 @@ +From 38e48da3c27d38b05bed4572930240e73e4dfb22 Mon Sep 17 00:00:00 2001 From: Mans Rullgard <mans@mansr.com> -Date: Fri, 29 Aug 2008 01:52:42 +0000 (+0100) -Subject: OMAP: Make dpll4_m4_ck programmable with clk_set_rate() -X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=feab5b628c06619196044c15d9d2a113df173eee - -OMAP: Make dpll4_m4_ck programmable with clk_set_rate() +Date: Tue, 22 Jul 2008 01:31:11 +0100 +Subject: [PATCH] ARM: OMAP: make dpll4_m4_ck programmable with clk_set_rate() Filling the set_rate and round_rate fields of dpll4_m4_ck makes this clock programmable through clk_set_rate(). This is needed to give omapfb control over the dss1_alwon_fck rate. - -Signed-off-by: Mans Rullgard <mans@mansr.com> --- + arch/arm/mach-omap2/clock34xx.h | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h -index 41f91f8..9c8e0c8 100644 +index 08789c8..1032577 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h -@@ -877,6 +877,8 @@ static struct clk dpll4_m4_ck = { +@@ -821,6 +821,8 @@ static struct clk dpll4_m4_ck = { PARENT_CONTROLS_CLOCK, .clkdm = { .name = "dpll4_clkdm" }, .recalc = &omap2_clksel_recalc, @@ -25,3 +23,6 @@ index 41f91f8..9c8e0c8 100644 }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap_git.bb b/packages/linux/linux-omap_git.bb index 2462484dd3..72684249b9 100644 --- a/packages/linux/linux-omap_git.bb +++ b/packages/linux/linux-omap_git.bb @@ -6,18 +6,17 @@ KERNEL_IMAGETYPE = "uImage" COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm" -SRCREV = "2a3408be17f287fdb5809c9b6c68e7ad96d25b74" +SRCREV = "f7429fd378a29cf6947c2613e0fd6e6e36165167" -#PV = "2.6.26+2.6.27-rc7+${PR}+gitr${SRCREV}" -PV = "2.6.27+${PR}+gitr${SRCREV}" -PR = "r4" +PV = "2.6.27+2.6.28-rc3+${PR}+gitr${SRCREV}" +#PV = "2.6.27+${PR}+gitr${SRCREV}" +PR = "r0" SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \ file://defconfig" SRC_URI_append = " \ file://no-empty-flash-warnings.patch;patch=1 \ - file://oprofile-0.9.3.armv7.diff;patch=1 \ file://no-cortex-deadlock.patch;patch=1 \ file://read_die_ids.patch;patch=1 \ file://fix-install.patch;patch=1 \ @@ -30,12 +29,19 @@ SRC_URI_append = " \ file://mru-improve-pixclock-config.diff;patch=1 \ file://mru-make-video-timings-selectable.diff;patch=1 \ file://mru-enable-overlay-optimalization.diff;patch=1 \ - file://musb-fix-ISO-in-unlink.diff;patch=1 \ file://musb-fix-multiple-bulk-transfers.diff;patch=1 \ file://musb-fix-endpoints.diff;patch=1 \ file://dvb-fix-dma.diff;patch=1 \ file://0001-Removed-resolution-check-that-prevents-scaling-when.patch;patch=1 \ file://0001-Implement-downsampling-with-debugs.patch;patch=1 \ + file://0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch;patch=1 \ + file://0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch;patch=1 \ + file://0005-DSS-RFBI-support-for-OMAP2-3-DSS.patch;patch=1 \ + file://0006-DSS-TV-out-support-for-OMAP2-3-DSS.patch;patch=1 \ + file://0007-DSS-DSI-support-for-OMAP2-3-DSS.patch;patch=1 \ + file://0008-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch;patch=1 \ + file://0009-DSS-Add-generic-DVI-panel.patch;patch=1 \ + file://0010-DSS-support-for-Beagle-Board.patch;patch=1 \ " |