summaryrefslogtreecommitdiff
path: root/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'packages/linux/openslug-kernel-2.6.9/nslu2-setup.c')
-rw-r--r--packages/linux/openslug-kernel-2.6.9/nslu2-setup.c132
1 files changed, 0 insertions, 132 deletions
diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c b/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c
deleted file mode 100644
index 5698ea9813..0000000000
--- a/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nslu2-setup.c
- *
- * NSLU2 board-setup
- *
- * based ixdp425-setup.c:
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * Fixed missing init_time in MACHINE_START kas11 10/22/04
- * Changed to conform to new style __init ixdp425 kas11 10/22/04
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#ifdef __ARMEB__
-#define REG_OFFSET 3
-#else
-#define REG_OFFSET 0
-#endif
-
-/*
- * NSLU2 uses only one serial port
- */
-static struct uart_port nslu2_serial_ports[] = {
- {
- .membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET),
- .mapbase = (IXP4XX_UART1_BASE_PHYS),
- .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- .line = 0,
- .type = PORT_XSCALE,
- .fifosize = 32
- }
-#if 0
- , {
- .membase = (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET),
- .mapbase = (IXP4XX_UART2_BASE_PHYS),
- .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- .line = 1,
- .type = PORT_XSCALE,
- .fifosize = 32
- }
-#endif
-};
-
-void __init nslu2_map_io(void)
-{
- early_serial_setup(&nslu2_serial_ports[0]);
-#if 0
- early_serial_setup(&nslu2_serial_ports[1]);
-#endif
- ixp4xx_map_io();
-}
-
-static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-};
-
-static struct resource nslu2_flash_resource = {
- .start = NSLU2_FLASH_BASE,
- .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device nslu2_flash = {
- .name = "IXP4XX-Flash",
- .id = 0,
- .dev = {
- .platform_data = &nslu2_flash_data,
- },
- .num_resources = 1,
- .resource = &nslu2_flash_resource,
-};
-
-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
- .sda_pin = NSLU2_SDA_PIN,
- .scl_pin = NSLU2_SCL_PIN,
-};
-
-static struct platform_device nslu2_i2c_controller = {
- .name = "IXP4XX-I2C",
- .id = 0,
- .dev = {
- .platform_data = &nslu2_i2c_gpio_pins,
- },
- .num_resources = 0
-};
-
-static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_controller,
- &nslu2_flash
-};
-
-static void __init nslu2_init(void)
-{
- platform_add_devices(&nslu2_devices, ARRAY_SIZE(nslu2_devices));
-}
-
-MACHINE_START(NSLU2, "Linksys NSLU2")
- MAINTAINER("www.nslu2-linux.org")
- BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
- IXP4XX_PERIPHERAL_BASE_VIRT)
- MAPIO(nslu2_map_io)
- INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here
- INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed?
- BOOT_PARAMS(0x0100)
- INIT_MACHINE(nslu2_init)
-MACHINE_END