diff options
Diffstat (limited to 'packages/linux/openslug-kernel-2.6.9/nslu2-setup.c')
-rw-r--r-- | packages/linux/openslug-kernel-2.6.9/nslu2-setup.c | 132 |
1 files changed, 0 insertions, 132 deletions
diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c b/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c deleted file mode 100644 index 5698ea9813..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-setup.c - * - * NSLU2 board-setup - * - * based ixdp425-setup.c: - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Author: Mark Rakes <mrakes at mac.com> - * Maintainers: http://www.nslu2-linux.org/ - * - * Fixed missing init_time in MACHINE_START kas11 10/22/04 - * Changed to conform to new style __init ixdp425 kas11 10/22/04 - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -#ifdef __ARMEB__ -#define REG_OFFSET 3 -#else -#define REG_OFFSET 0 -#endif - -/* - * NSLU2 uses only one serial port - */ -static struct uart_port nslu2_serial_ports[] = { - { - .membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART1_BASE_PHYS), - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 0, - .type = PORT_XSCALE, - .fifosize = 32 - } -#if 0 - , { - .membase = (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART2_BASE_PHYS), - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 1, - .type = PORT_XSCALE, - .fifosize = 32 - } -#endif -}; - -void __init nslu2_map_io(void) -{ - early_serial_setup(&nslu2_serial_ports[0]); -#if 0 - early_serial_setup(&nslu2_serial_ports[1]); -#endif - ixp4xx_map_io(); -} - -static struct flash_platform_data nslu2_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource nslu2_flash_resource = { - .start = NSLU2_FLASH_BASE, - .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nslu2_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &nslu2_flash_data, - }, - .num_resources = 1, - .resource = &nslu2_flash_resource, -}; - -static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { - .sda_pin = NSLU2_SDA_PIN, - .scl_pin = NSLU2_SCL_PIN, -}; - -static struct platform_device nslu2_i2c_controller = { - .name = "IXP4XX-I2C", - .id = 0, - .dev = { - .platform_data = &nslu2_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, - &nslu2_flash -}; - -static void __init nslu2_init(void) -{ - platform_add_devices(&nslu2_devices, ARRAY_SIZE(nslu2_devices)); -} - -MACHINE_START(NSLU2, "Linksys NSLU2") - MAINTAINER("www.nslu2-linux.org") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(nslu2_map_io) - INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here - INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? - BOOT_PARAMS(0x0100) - INIT_MACHINE(nslu2_init) -MACHINE_END |