1 files changed, 0 insertions, 87 deletions
diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2-pci.c b/packages/linux/openslug-kernel-2.6.9/nslu2-pci.c
deleted file mode 100644
index 7327c65a4f..0000000000
--- a/packages/linux/openslug-kernel-2.6.9/nslu2-pci.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nslu2-pci.c
- *
- * NSLU2 board-level PCI initialization
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-// GPIO 8 is used as the power input so is not free for use as a PCI IRQ
-// However, all the common PCI setup code presumes the standard 4 PCI
-// interrupts are available.  So we compromise...we don't enable the
-// IRQ on Pin 8 but we let
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-void __init nslu2_pci_preinit(void)
-{
-	gpio_line_config(NSLU2_PCI_INTA_PIN,
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(NSLU2_PCI_INTB_PIN,
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(NSLU2_PCI_INTC_PIN,
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-//	gpio_line_config(NSLU2_PCI_INTD_PIN,
-//				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-
-	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
-	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
-	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-//	gpio_line_isr_clear(NSLU2_PCI_INTD_PIN);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
-		IRQ_NSLU2_PCI_INTA,
-		IRQ_NSLU2_PCI_INTB,
-		IRQ_NSLU2_PCI_INTC,
-//		IRQ_NSLU2_PCI_INTD
-	};
-
-	int irq = -1;
-
-	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
-		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
-		irq = pci_irq_table[(slot + pin - 2) % 3]; // ! % 4 kas11
-	}
-
-	return irq;
-}
-
-struct hw_pci __initdata nslu2_pci = {
-	.nr_controllers = 1,
-	.preinit	= nslu2_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= nslu2_map_irq,
-};
-
-int __init nslu2_pci_init(void)		//monkey see, monkey do
-{
-	if (machine_is_nslu2())
-		pci_common_init(&nslu2_pci);
-	return 0;
-}
-
-subsys_initcall(nslu2_pci_init);
-