1 files changed, 0 insertions, 144 deletions
diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c
deleted file mode 100644
index 358c58f22e..0000000000
--- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nslu2-setup.c
- *
- * NSLU2 board-setup
- *
- * based ixdp425-setup.c:
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * Fixed missing init_time in MACHINE_START kas11 10/22/04
- * Changed to conform to new style __init ixdp425 kas11 10/22/04 
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#ifdef	__ARMEB__
-#define	REG_OFFSET	3
-#else
-#define	REG_OFFSET	0
-#endif
-
-/*
- * NSLU2 uses only one serial port
- */
-static struct uart_port nslu2_serial_ports[] = {
-	{
-		.membase	= (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET),
-		.mapbase	= (IXP4XX_UART1_BASE_PHYS),
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-		.line		= 0,
-		.type		= PORT_XSCALE,
-		.fifosize	= 32
-	}
-#if 0
-	, {
-		.membase	= (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET),
-		.mapbase	= (IXP4XX_UART2_BASE_PHYS),
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-		.line		= 1,
-		.type		= PORT_XSCALE,
-		.fifosize	= 32
-	}
-#endif
-};
-
-void __init nslu2_map_io(void)
-{
-	early_serial_setup(&nslu2_serial_ports[0]);
-#if 0
-	early_serial_setup(&nslu2_serial_ports[1]);
-#endif
-	ixp4xx_map_io();
-}
-
-static struct flash_platform_data nslu2_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource nslu2_flash_resource = {
-	.start		= NSLU2_FLASH_BASE,
-	.end		= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nslu2_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &nslu2_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nslu2_flash_resource,
-};
-
-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-	.sda_pin	= NSLU2_SDA_PIN,
-	.scl_pin	= NSLU2_SCL_PIN,
-};
-
-static struct platform_device nslu2_i2c_controller = {
-	.name		= "IXP4XX-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &nslu2_i2c_gpio_pins,
-	},
-	.num_resources	= 0
-};
-
-static struct platform_device *nslu2_devices[] __initdata = {
-	&nslu2_i2c_controller,
-	&nslu2_flash
-};
-
-static void n2_power_off(void)
-{
-	/* This causes the box to drop the power and go dead. */
-#define GPIO_PO_BM		0x0100  //b0000 0001 0000 0000
-	*IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM;	// enable the pwr cntl gpio
-	*IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM;	// do the deed
-}
-
-static void __init nslu2_init(void)
-{
-	/* Need power off to work. */
-	pm_power_off = n2_power_off;
-	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-}
-
-MACHINE_START(NSLU2, "Linksys NSLU2")
-	MAINTAINER("www.nslu2-linux.org")
-	BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
-		IXP4XX_PERIPHERAL_BASE_VIRT)
-	MAPIO(nslu2_map_io)
-	INITIRQ(ixp4xx_init_irq)	//FIXME: all irq are off here
-	.timer          = &ixp4xx_timer,
-	// INITTIME(ixp4xx_init_time)	//this was missing in 2.6.7 code ...soft reboot needed?
-	BOOT_PARAMS(0x0100)
-	INIT_MACHINE(nslu2_init)
-MACHINE_END