diff options
Diffstat (limited to 'packages/linux/nslu2-kernel/2.6.13')
15 files changed, 0 insertions, 5165 deletions
diff --git a/packages/linux/nslu2-kernel/2.6.13/.mtn2git_empty b/packages/linux/nslu2-kernel/2.6.13/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-copy-from.patch b/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-copy-from.patch deleted file mode 100644 index 03d94d282c..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-copy-from.patch +++ /dev/null @@ -1,39 +0,0 @@ -# This patch fixes ixp4xx_copy_from for cases where the 'from' -# pointer is odd - that would cause all the accesses to be -# misaligned in the old code. ---- linux-2.6.12.2/.pc/ixp4xx_copy_from.patch/drivers/mtd/maps/ixp4xx.c 2005-09-21 22:35:38.761014739 -0700 -+++ linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c 2005-09-23 01:27:54.696223365 -0700 -@@ -54,19 +54,23 @@ - static void ixp4xx_copy_from(struct map_info *map, void *to, - unsigned long from, ssize_t len) - { -- int i; -- u8 *dest = (u8 *) to; -- u16 *src = (u16 *) (map->map_priv_1 + from); -- u16 data; -+ if (len <= 0) -+ return; - -- for (i = 0; i < (len / 2); i++) { -- data = src[i]; -- dest[i * 2] = BYTE0(data); -- dest[i * 2 + 1] = BYTE1(data); -+ u8 *dest = (u8 *) to; -+ u8 *src = (u8 *) (map->map_priv_1 + from); -+ if (from & 1) -+ *dest++ = BYTE1(*(u16 *)(src-1)), ++src, --len; -+ -+ while (len >= 2) { -+ u16 data = *(u16 *)src; src += 2; -+ *dest++ = BYTE0(data); -+ *dest++ = BYTE1(data); -+ len -= 2; - } - -- if (len & 1) -- dest[len - 1] = BYTE0(src[i]); -+ if (len > 0) -+ *dest++ = BYTE0(*(u16 *)src); - } - - /* diff --git a/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-regs.patch b/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-regs.patch deleted file mode 100644 index 32f7e3ccb8..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-regs.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 23:37:49.000000000 -0800 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-06-17 17:51:32.569981939 -0700 -@@ -52,7 +52,7 @@ - * Expansion BUS Configuration registers - */ - #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) --#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000) -+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) - #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) - - /* diff --git a/packages/linux/nslu2-kernel/2.6.13/20-timer.patch b/packages/linux/nslu2-kernel/2.6.13/20-timer.patch deleted file mode 100644 index 356da6bb28..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/20-timer.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff -urN linux-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h ---- linux-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h 2005-09-17 12:42:45.000000000 +0200 -+++ nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h 2005-09-17 12:15:31.000000000 +0200 -@@ -9,7 +9,12 @@ - * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the - * timer register ignores the bottom 2 bits of the LATCH value. -+ * The NSLU2 has a 33.00MHz crystal, so a different FREQ is required. - */ -+#ifdef CONFIG_ARCH_NSLU2 -+#define FREQ 66000000 -+#else - #define FREQ 66666666 -+#endif - #define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) - diff --git a/packages/linux/nslu2-kernel/2.6.13/30-i2c-x1205.patch b/packages/linux/nslu2-kernel/2.6.13/30-i2c-x1205.patch deleted file mode 100644 index f05609f1e6..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/30-i2c-x1205.patch +++ /dev/null @@ -1,580 +0,0 @@ -diff -urN linux-2.6.13.1/drivers/i2c/chips/Kconfig nslu2-2.6.13.1/drivers/i2c/chips/Kconfig ---- linux-2.6.13.1/drivers/i2c/chips/Kconfig 2005-09-17 12:42:33.000000000 +0200 -+++ nslu2-2.6.13.1/drivers/i2c/chips/Kconfig 2005-09-17 13:46:42.000000000 +0200 -@@ -136,4 +136,14 @@ - This driver can also be built as a module. If so, the module - will be called max6875. - -+config SENSORS_X1205 -+ tristate "Xicor X1205 RTC chip" -+ depends on I2C && EXPERIMENTAL -+ select I2C_SENSOR -+ help -+ If you say yes here you get support for the Xicor x1205 RTC chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called x1205-rtc -+ - endmenu -diff -urN linux-2.6.13.1/drivers/i2c/chips/Makefile nslu2-2.6.13.1/drivers/i2c/chips/Makefile ---- linux-2.6.13.1/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200 -+++ nslu2-2.6.13.1/drivers/i2c/chips/Makefile 2005-09-17 13:35:39.000000000 +0200 -@@ -13,6 +13,7 @@ - obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o - obj-$(CONFIG_TPS65010) += tps65010.o -+obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o - - ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) - EXTRA_CFLAGS += -DDEBUG -diff -urN linux-2.6.13.1/drivers/i2c/chips/x1205-rtc.c nslu2-2.6.13.1/drivers/i2c/chips/x1205-rtc.c ---- linux-2.6.13.1/drivers/i2c/chips/x1205-rtc.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/drivers/i2c/chips/x1205-rtc.c 2005-09-17 13:51:03.000000000 +0200 -@@ -0,0 +1,547 @@ -+/* -+ x1205 - an 12c driver for the Xicor X1205 RTC -+ Copyright 2004 Karen Spearel -+ -+ please send all reports to: -+ kas11 at tampabay dot rr dot com -+ -+ based on linux/drivers/acron/char/pcf8583.h -+ Copyright (C) 2000 Russell King -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+*/ -+/* -+ -+ * i2c_adapter is the structure used to identify a physical i2c bus along -+ * with the access algorithms necessary to access it. -+ -+struct i2c_adapter { -+ struct module *owner; -+ unsigned int id; == is algo->id | hwdep.struct->id, for registered values see below -+ unsigned int class; -+ struct i2c_algorithm *algo; the algorithm to access the bus -+ void *algo_data; -+ -+ --- administration stuff. -+ int (*client_register)(struct i2c_client *); -+ int (*client_unregister)(struct i2c_client *); -+ -+ data fields that are valid for all devices -+ struct semaphore bus_lock; -+ struct semaphore clist_lock; -+ -+ int timeout; -+ int retries; -+ struct device dev; the adapter device -+ struct class_device class_dev; the class device -+ -+#ifdef CONFIG_PROC_FS -+ No need to set this when you initialize the adapter -+ int inode; -+#endif def CONFIG_PROC_FS -+ -+ int nr; -+ struct list_head clients; -+ struct list_head list; -+ char name[I2C_NAME_SIZE]; -+ struct completion dev_released; -+ struct completion class_dev_released; -+}; -+*/ -+ -+ -+/*========== Driver for the X1205 on the Linksys NSLU2 ==================*/ -+ -+#include <linux/init.h> -+#include <linux/i2c.h> -+#include <linux/slab.h> -+#include <linux/string.h> -+#include <linux/errno.h> -+#include <linux/bcd.h> -+#include <linux/rtc.h> -+#include <linux/fs.h> -+#include <linux/proc_fs.h> -+#include <linux/miscdevice.h> -+#include <linux/device.h> -+#include <asm/uaccess.h> -+#include <asm/system.h> -+#include <linux/moduleparam.h> -+ -+#define RTC_GETDATETIME 0 -+#define RTC_SETTIME 1 -+#define RTC_SETDATETIME 2 -+ -+#define I2C_M_WR 0 // just for consistancy -+ -+// offsets into read buf - add 2 for write buf -+#define CCR_SEC 0 -+#define CCR_MIN 1 -+#define CCR_HOUR 2 -+#define CCR_MDAY 3 -+#define CCR_MONTH 4 -+#define CCR_YEAR 5 -+#define CCR_WDAY 6 -+#define CCR_Y2K 7 -+ -+#define X1205_I2C_BUS_ADDR 0x6f // hardwired into x1205 -+#define X1205_ALM0_BASE 0x00 // Base address of the ALM0 -+#define X1205_CCR_BASE 0x30 // Base address of the CCR -+#define X1205_SR_ADDR 0x3f // Status Register -+#define X1205_SR_WEL 0x02 // Write Enable Latch bit -+#define X1205_SR_RWEL 0x04 // Register Write Enable Bit -+#define X1205_MILBIT 0x80 // this bit set in ccr.hour for 24 hr mode -+#define NOERR 0 -+#define RTC_NODATE 0 -+#define RTC_DATETOO 1 -+ -+// comment out next line is your x1205 can't do page writes -+//#define X1205PAGEWRITE 1 -+#ifdef X1205PAGEWRITE -+#define DRIVERNAME "Xicor x1205 RTC Driver v0.9.3.3" -+#else -+#define DRIVERNAME "Xicor x1205 RTC Dvr v0.9.3.3NPW" -+#endif -+ -+#define DEBUG KERN_DEBUG -+ -+ -+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base); -+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base); -+static int x1205_attach(struct i2c_adapter *adapter); -+static int x1205_detach(struct i2c_client *client); -+static int x1205_validate_tm(struct rtc_time *tm); -+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); -+static int x1205_sync_rtc(void); -+static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr); -+static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -+static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data); -+ -+static struct i2c_driver x1205_driver = { -+ .owner = THIS_MODULE, -+ .name = DRIVERNAME, -+ .id = I2C_DRIVERID_EXP0, -+ .flags = I2C_DF_NOTIFY, -+ .attach_adapter = &x1205_attach, //we don't need to probe...x1205 is hardwired @ 0x6f -+ .detach_client = &x1205_detach, -+ .command = &x1205_command, //this prolly never gets called...used internally tho -+}; -+ -+static struct i2c_client x1205_i2c_client = { -+ .flags = 0, -+ .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit -+ .adapter = NULL, // the adapter we sit on assigned in attach -+ .driver = &x1205_driver, // and our access routines -+ .usage_count = 0, // How many accesses currently to this client -+ .dev = {}, // the device structure -+ .list = {}, -+ .name = DRIVERNAME, -+ .released = {}, -+}; -+ -+static struct file_operations rtc_fops = { -+ owner: THIS_MODULE, -+ ioctl: x1205_ioctl, -+ read: x1205_read, -+}; -+ -+static struct miscdevice x1205_miscdev = { -+ .minor = RTC_MINOR, -+ .name = "rtc", -+ .fops = &rtc_fops, -+}; -+extern int (*set_rtc)(void); -+static unsigned epoch = 1900; //coresponds to year 0 -+static unsigned rtc_epoch = 2000; -+static const unsigned char days_in_mo[] = -+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; -+ -+//===================================CODE====================================== -+// in the routines that deal directly with the x1205 hardware, we use -+// rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch -+// Epoch is inited as 2000. Time is set to UT -+//============================================================================= -+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base) -+{ -+ static unsigned char addr[2] = { 0,} ; -+ unsigned char buf[8]; -+ struct i2c_msg msgs[2] = { -+ { client->addr, I2C_M_WR, 2, addr }, //msg 1 = send base address -+ { client->addr, I2C_M_RD, 8, buf }, //msg 2 = read sequential data -+ }; -+ addr[1] = reg_base; -+ if ((i2c_transfer(client->adapter, msgs, 2)) == 2) { //did we read 2 messages? -+ printk(KERN_DEBUG "raw x1205 read data - sec-%02x min-%02x hr-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", -+ buf[0],buf[1],buf[2],buf[3],buf[4],buf[5],buf[6], buf[7]); -+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); -+ tm->tm_min = BCD2BIN(buf[CCR_MIN]); -+ buf[CCR_HOUR] &= ~X1205_MILBIT; -+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); //hr is 0-23 -+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); -+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); -+ rtc_epoch = BCD2BIN(buf[CCR_Y2K]) * 100; -+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + rtc_epoch - epoch; -+ tm->tm_wday = buf[CCR_WDAY]; -+ printk(KERN_DEBUG "rtc_time output data - sec-%02d min-%02d hr-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", -+ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday,epoch, rtc_epoch); -+ } else { -+ printk(KERN_DEBUG "i2c_transfer Read Error\n"); -+ return -EIO; -+ } -+ -+ return NOERR; -+} -+// x1205pagewrite allows writing a block of registers in msg3 even though the x1205 says -+// nothing about this in its spec. -+// it needs more testing as it is possible some x1205s are actually not-completely- -+// functional x1226s and there is a reason for the multiple write to not be in the spec. -+// anyhow, it is enabled for the time being...and we even push out luck by sending 10 bytes -+ -+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base) -+{ -+ static unsigned char wel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL }; -+ static unsigned char rwel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL | X1205_SR_RWEL }; -+ static unsigned char diswe[3] = { 0, X1205_SR_ADDR, 0 }; -+ -+#ifdef X1205PAGEWRITE -+ -+ static unsigned char buf[10] = { 0, X1205_CCR_BASE, }; -+ struct i2c_msg msgs[4] = { -+ { client->addr, I2C_M_WR, 3, wel }, //msg 1 = write WEL to to ccr sr -+ { client->addr, I2C_M_WR, 3, rwel }, //msg 2 = write RWEL to ccr sr -+ { client->addr, I2C_M_WR, 10, buf }, //msg 3 = write ccr base addr +seq data -+ { client->addr, I2C_M_WR, 3, diswe }, //msg 4 = 0 to ccr sr to disable writes -+ }; -+ -+ msgs[2].len = 5; // 5 bytes + addr to set time only -+ buf [1] = reg_base; -+ buf[CCR_SEC+2] = BIN2BCD(tm->tm_sec); -+ buf[CCR_MIN+2] = BIN2BCD(tm->tm_min); -+ buf[CCR_HOUR+2] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format -+ if (datetoo == 1) { -+ buf[CCR_MDAY+2] = BIN2BCD(tm->tm_mday); -+ buf[CCR_MONTH+2] = BIN2BCD(tm->tm_mon); // input is 0-11 -+ buf[CCR_YEAR+2] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 -+ buf[CCR_WDAY+2] = tm->tm_wday & 7; -+ buf[CCR_Y2K+2] = BIN2BCD((rtc_epoch/100)); -+ msgs[2].len += 5; //5 more bytes to set date -+ } -+ printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", -+ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); -+ printk(KERN_DEBUG "BCD write data - sec-%02x min-%02x hour-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", -+ buf[2],buf[3],buf[4],buf[5],buf[6], buf[7], buf[8], buf[9]); -+ -+ if ((i2c_transfer(client->adapter, msgs, 4)) != 4) -+ return -EIO; -+ return NOERR; -+ -+#else //do this if page writes aren't working -+ -+ int i,xfer; -+ static unsigned char data[3] = { 0,}; -+ static unsigned char buf[8]; -+ -+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); -+ buf[CCR_MIN] = BIN2BCD(tm->tm_min); -+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format -+ if (datetoo == 1) { -+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); -+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); // input is 0-11 -+ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 -+ buf[CCR_WDAY] = tm->tm_wday & 7; -+ buf[CCR_Y2K] = BIN2BCD((rtc_epoch/100)); -+ } -+ printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", -+ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); -+ -+ xfer = i2c_master_send(client, wel, 3); -+ printk(KERN_DEBUG "wen - %x\n", xfer); -+ if (xfer != 3) -+ return -EIO; -+ -+ xfer = i2c_master_send(client, rwel, 3); -+ printk(KERN_DEBUG "wenb - %x\n", xfer); -+ if (xfer != 3) -+ return -EIO; -+ -+ for (i = 0; i < 8; i++) { -+ data[1] = i + reg_base; -+ data[2] = buf[i]; -+ xfer = i2c_master_send(client, data, 3); -+ printk(KERN_DEBUG "xfer - %d addr - %02x data - %02x\n", xfer, data[1], data[2]); -+ if (xfer != 3) -+ return -EIO; -+ }; -+ -+ xfer = i2c_master_send(client, diswe, 3); -+ printk(KERN_DEBUG "wdis - %x\n", xfer); -+ if (xfer != 3) -+ return -EIO; -+ return NOERR; -+#endif -+} -+//============================================================================= -+ -+static int x1205_attach(struct i2c_adapter *adapter) -+{ -+ struct rtc_time tm; -+ struct timespec tv; -+ int errno; -+ -+ x1205_i2c_client.adapter = adapter; -+// x1205_i2c_client.id++; -+ -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver -+ return -EIO; -+ -+ if ((errno = i2c_attach_client(&x1205_i2c_client)) != NOERR) -+ return errno; -+ -+ tv.tv_nsec = tm.tm_sec * 10000000; -+ tv.tv_sec = mktime(tm.tm_year+epoch, tm.tm_mon, tm.tm_mday, tm.tm_hour, -+ tm.tm_min, tm.tm_sec); -+ do_settimeofday(&tv); -+ set_rtc = x1205_sync_rtc; -+ -+ printk(KERN_DEBUG "%s attached on adapter %s\n",x1205_i2c_client.name, -+ x1205_i2c_client.adapter->name); //why is this name a null string? -+ -+ return NOERR; -+} -+ -+static int x1205_detach(struct i2c_client *client) -+{ -+ int errno; -+ -+ if ((errno = i2c_detach_client(client)) != 0) { -+ printk(KERN_DEBUG "i2c_detach failed - errno = %d\n", errno); -+ return errno; -+ } -+ -+ return NOERR; -+} -+ -+// make sure the rtc_time values are in bounds -+static int x1205_validate_tm(struct rtc_time *tm) -+{ -+ tm->tm_year += 1900; -+ -+ if (tm->tm_year < 1970) -+ return -EINVAL; -+ -+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) -+ return -EINVAL; -+ -+ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && -+ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) -+ return -EINVAL; -+ -+ if ((tm->tm_year -= epoch) > 255) -+ return -EINVAL; -+ -+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) -+ return -EINVAL; -+ return NOERR; -+} -+ -+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) -+{ -+ int errno, dodate = RTC_DATETOO; -+ -+ if (client == NULL || tm == NULL) -+ return -EINVAL; -+ if (!capable(CAP_SYS_TIME)) -+ return -EACCES; -+ -+ printk(KERN_DEBUG "x1205_command %d\n", cmd); -+ -+ switch (cmd) { -+ case RTC_GETDATETIME: -+ return x1205_get_datetime(client, tm, X1205_CCR_BASE); -+ -+ case RTC_SETTIME: // note fall thru -+ dodate = RTC_NODATE; -+ case RTC_SETDATETIME: -+ if ((errno = x1205_validate_tm(tm)) < NOERR) -+ return errno; -+ return x1205_set_datetime(client, tm, dodate, X1205_CCR_BASE); -+ -+ default: -+ return -EINVAL; -+ } -+} -+ -+static int x1205_sync_rtc(void) -+{ -+ struct rtc_time new_tm, old_tm; -+ unsigned long cur_secs = xtime.tv_sec; -+ -+ printk(KERN_DEBUG "x1205_sync_rtc entry\n"); -+ -+ if (x1205_command(&x1205_i2c_client, RTC_GETDATETIME, &old_tm)) -+ return 0; -+ -+// xtime.tv_nsec = old_tm.tm_sec * 10000000; //FIXME: -+ new_tm.tm_sec = cur_secs % 60; -+ cur_secs /= 60; -+ new_tm.tm_min = cur_secs % 60; -+ cur_secs /= 60; -+ new_tm.tm_hour = cur_secs % 24; -+ -+ /* -+ * avoid writing when we're going to change the day -+ * of the month. We will retry in the next minute. -+ * This basically means that if the RTC must not drift -+ * by more than 1 minute in 11 minutes. -+ */ -+ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || -+ (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) -+ return 1; -+ printk(KERN_DEBUG "x1205_sync_rtc exit\n"); -+ -+ return x1205_command(&x1205_i2c_client, RTC_SETTIME, &new_tm); -+} -+ -+static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr) -+{ -+ struct rtc_time tm; -+ -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) -+ return -EIO; -+ return copy_to_user(buf, &tm, sizeof(tm)) ? -EFAULT : NOERR; -+} -+ -+//============================================================================== -+ -+static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ struct rtc_time tm; -+ int errno; -+ -+ printk(KERN_DEBUG "ioctl = %x\n", cmd); -+ -+ switch (cmd) { -+ case RTC_RD_TIME: -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) -+ return -EIO; -+ break; -+ -+ case RTC_SET_TIME: -+ if (!capable(CAP_SYS_TIME)) -+ return -EACCES; -+ -+ if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) -+ return -EFAULT; -+ if ((errno = x1205_validate_tm(&tm)) < NOERR) -+ return errno; -+ return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_CCR_BASE); -+ -+ case RTC_ALM_SET: //FIXME: set Control Regs -+ if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) -+ return -EFAULT; -+ return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_ALM0_BASE); -+ -+ case RTC_ALM_READ: -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_ALM0_BASE)) < NOERR) -+ return -EIO; -+ break; -+ -+ case RTC_EPOCH_READ: -+ -+ return put_user (epoch, (unsigned long __user *)arg); -+ -+ case RTC_EPOCH_SET: -+ if (arg < 1900) -+ return -EINVAL; -+ -+ if (!capable(CAP_SYS_TIME)) -+ return -EACCES; -+ -+ epoch = arg; -+ return 0; -+ -+ default: -+ return -ENOTTY; -+ } -+ return copy_to_user((void __user *)arg, &tm, sizeof tm) ? -EFAULT : 0; -+ -+} -+ -+static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) -+{ -+ struct rtc_time tm; -+ int slen, errno; -+ -+ if ((errno = x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) -+ return errno; -+ -+// here we return the real year and the month as 1-12 since it is human-readable -+ slen = sprintf(buf, "rtc_time\t: %02d:%02d:%02d\nrtc_date\t: %04d-%02d-%02d\n", -+ tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year + 1900, tm.tm_mon+1, tm.tm_mday); -+ printk(KERN_DEBUG "raw rtc_time\t: %02d:%02d:%02d\nraw rtc_date\t: %04d-%02d-%02d\n", -+ tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year, tm.tm_mon, tm.tm_mday); -+ -+ if (slen <= off + len) -+ *eof = 1; -+ *start = buf + off; -+ slen -= off; -+ if (slen > len) -+ slen = len; -+ if ( slen < 0 ) -+ slen = 0; -+ -+ return slen; -+} -+ -+static int __init x1205_init(void) -+{ -+ struct rtc_time tm; -+ int errno; -+ printk(KERN_INFO "LOADED %s\n", DRIVERNAME); -+ -+ if ((errno = i2c_add_driver(&x1205_driver)) != NOERR) { -+ dev_dbg(x1205_i2c_client.dev, "x1205_init failed - errno = %d\n", errno); -+ return (errno); -+ } -+ if ((errno = misc_register(&x1205_miscdev)) != NOERR) { -+ dev_dbg(x1205_i2c_client.dev, "Register Misc Driver failed - errno = %d\n", errno); -+ i2c_del_driver(&x1205_driver); -+ return errno; -+ } -+ if (create_proc_read_entry("driver/rtc", 0, NULL, x1205_read_proc, NULL) < NOERR) -+ return -ENOMEM; -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functionality -+ return -EIO; -+ -+ return NOERR; -+} -+ -+static void __exit x1205_exit(void) -+{ -+ remove_proc_entry("driver/rtc", NULL); -+ misc_deregister(&x1205_miscdev); -+ i2c_del_driver(&x1205_driver); -+ set_rtc = NULL; -+} -+ -+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -+MODULE_DESCRIPTION("Xicor X1205-RTC Driver"); -+MODULE_LICENSE("GPL"); -+static int debug = 7; -+module_param(debug, bool, 0644); -+MODULE_PARM_DESC(debug, "Debugging enabled = 1"); -+ -+module_init(x1205_init); -+module_exit(x1205_exit); diff --git a/packages/linux/nslu2-kernel/2.6.13/40-mtd-shutdown.patch b/packages/linux/nslu2-kernel/2.6.13/40-mtd-shutdown.patch deleted file mode 100644 index e7cce4ebc0..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/40-mtd-shutdown.patch +++ /dev/null @@ -1,66 +0,0 @@ -# Ensure that the MTD is shut down on halt/reboot, otherwise the -# hardware reset hangs - ---- linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c.orig 2005-07-17 15:07:47.790388300 -0700 -+++ linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c 2005-07-17 17:00:08.082672710 -0700 -@@ -144,6 +144,52 @@ - return 0; - } - -+static void ixp4xx_flash_shutdown(struct device *_dev) -+{ -+ struct platform_device *dev = to_platform_device(_dev); -+ struct flash_platform_data *plat = dev->dev.platform_data; -+ struct ixp4xx_flash_info *info = dev_get_drvdata(&dev->dev); -+ map_word d; -+ -+ dev_set_drvdata(&dev->dev, NULL); -+ -+ if(!info) -+ return; -+ -+ /* -+ * This is required for a soft reboot to work. -+ */ -+ d.x[0] = 0xff; -+ ixp4xx_write16(&info->map, d, 0x55 * 0x2); -+ -+#if 0 -+ /* This is commented out because it seems to cause a kernel -+ * panic (at least if it isn't commented out the kernel fails -+ * to shut down). Should be investigated. -+ */ -+ if (info->mtd) { -+ del_mtd_partitions(info->mtd); -+ map_destroy(info->mtd); -+ } -+#endif -+ if (info->map.map_priv_1) -+ iounmap((void *) info->map.map_priv_1); -+ -+ if (info->partitions) -+ kfree(info->partitions); -+ -+ if (info->res) { -+ release_resource(info->res); -+ kfree(info->res); -+ } -+ -+ if (plat->exit) -+ plat->exit(); -+ -+ /* Disable flash write */ -+ *IXP4XX_EXP_CS0 &= ~IXP4XX_FLASH_WRITABLE; -+} -+ - static int ixp4xx_flash_probe(struct device *_dev) - { - struct platform_device *dev = to_platform_device(_dev); -@@ -243,6 +289,7 @@ - .bus = &platform_bus_type, - .probe = ixp4xx_flash_probe, - .remove = ixp4xx_flash_remove, -+ .shutdown = ixp4xx_flash_shutdown, - }; - - static int __init ixp4xx_flash_init(void) diff --git a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-arch.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-arch.patch deleted file mode 100644 index f49ea7f1c3..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-arch.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700 -+++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700 -@@ -37,6 +37,7 @@ - defined(CONFIG_ARCH_INTEGRATOR) || \ - defined(CONFIG_ARCH_PXA) || \ - defined(CONFIG_ARCH_IXP4XX) || \ -+ defined(CONFIG_ARCH_NSLU2) || \ - defined(CONFIG_ARCH_IXP2000) || \ - defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) ---- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S 2005-03-01 23:37:52.000000000 -0800 -+++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-06-17 17:51:32.546985425 -0700 -@@ -47,3 +47,8 @@ - orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) - #endif - -+#ifdef CONFIG_ARCH_NSLU2 -+ mov r7, #(MACH_TYPE_NSLU2 & 0xff) -+ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00) -+#endif -+ ---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700 -+++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700 -@@ -43,6 +43,12 @@ - IXDP465 Development Platform (Also known as BMP). - For more information on this platform, see <file:Documentation/arm/IXP4xx>. - -+config ARCH_NSLU2 -+ bool "NSLU2" -+ help -+ Say 'Y' here if you want your kernel to support Linksys's -+ NSLU2 NAS device. For more information on this platform, -+ see http://www.nslu2-linux.org - - # - # IXCDP1100 is the exact same HW as IXDP425, but with a different machine ---- linux-2.6.11/.pc/2.6.patch/arch/arm/tools/mach-types 2005-06-17 17:51:27.423762020 -0700 -+++ linux-2.6.11/arch/arm/tools/mach-types 2005-06-17 17:51:32.564982697 -0700 -@@ -604,7 +604,7 @@ - roverp7 MACH_ROVERP7 ROVERP7 594 - pr818s MACH_PR818S PR818S 595 - trxpro MACH_TRXPRO TRXPRO 596 --nslu2 MACH_NSLU2 NSLU2 597 -+nslu2 ARCH_NSLU2 NSLU2 597 - e400 MACH_E400 E400 598 - trab MACH_TRAB TRAB 599 - cmc_pu2 MACH_CMC_PU2 CMC_PU2 600 ---- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c 2005-03-01 23:37:30.000000000 -0800 -+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-06-17 17:51:32.566982394 -0700 -@@ -94,7 +94,11 @@ - struct resource *res; - }; - -+#ifdef CONFIG_ARCH_NSLU2 -+static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL }; -+#else - static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -+#endif - - static int ixp4xx_flash_remove(struct device *_dev) - { ---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700 -@@ -44,5 +44,6 @@ - #include "ixdp425.h" - #include "coyote.h" - #include "prpmc1100.h" -+#include "nslu2.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ ---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700 -@@ -93,4 +93,11 @@ - #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 - #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -+/* -+ * NSLU2 board IRQs -+ */ -+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 -+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 -+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 -+ - #endif diff --git a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-include.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-include.patch deleted file mode 100644 index c69e69c53e..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-include.patch +++ /dev/null @@ -1,47 +0,0 @@ -diff -urN linux-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h ---- linux-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h 2005-09-16 18:58:05.000000000 +0200 -@@ -0,0 +1,43 @@ -+/* -+ * include/asm-arm/arch-ixp4xx/nslu2.h -+ * -+ * NSLU2 platform specific definitions -+ * -+ * Author: Mark Rakes <mrakes AT mac.com> -+ * Maintainers: http://www.nslu2-linux.org -+ * -+ * based on ixdp425.h: -+ * Copyright 2004 (c) MontaVista, Software, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -+// kas11 11-2-04 -+ -+#ifndef __ASM_ARCH_HARDWARE_H__ -+#error "Do not include this directly, instead #include <asm/hardware.h>" -+#endif -+ -+#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -+#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE -+ -+#define NSLU2_SDA_PIN 7 -+#define NSLU2_SCL_PIN 6 -+ -+/* -+ * NSLU2 PCI IRQs -+ */ -+#define NSLU2_PCI_MAX_DEV 3 -+#define NSLU2_PCI_IRQ_LINES 3 -+ -+ -+/* PCI controller GPIO to IRQ pin mappings */ -+#define NSLU2_PCI_INTA_PIN 11 -+#define NSLU2_PCI_INTB_PIN 10 -+#define NSLU2_PCI_INTC_PIN 9 -+//#define NSLU2_PCI_INTD_PIN 8 -+ -+ diff --git a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-setup.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-setup.patch deleted file mode 100644 index f38c0c8b3e..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-setup.patch +++ /dev/null @@ -1,1156 +0,0 @@ -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/Makefile nslu2-2.6.13.1/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/Makefile 2005-09-17 12:42:02.000000000 +0200 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/Makefile 2005-09-17 12:44:11.000000000 +0200 -@@ -8,4 +8,5 @@ - obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o - obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o - obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o -+obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o - -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c 2005-09-17 00:12:18.000000000 +0200 -@@ -0,0 +1,777 @@ -+//============================================================================= -+// -+// n2-io.c version 0.1.7 -+// Author: Karen Spearel <kas11 at tampabay.rr.com> -+// please report problems/bugs directly to the address above -+// -+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per -+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk -+// -+// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, -+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT -+// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER -+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. -+// -+//============================================================================= -+// GPIO Function State -+// 0 Red LED Status -+// 1 Green LED Ready = 1 -+// 2 Disk 2 LED On = 0 -+// 3 Disk 1 LED On = 0 -+// 4 Buzzer -+// 5 Power Button Pressed = 1 -+// 8 Power Down Output = 1 powers down N2 -+// 12 Reset Pressed = 0 -+//============================================================================= -+// this driver is N2 specific and is purposely designed to do the minimum -+// necessary to provide the necessary services given the limited memory resources -+// of the N2. As OpenN2 develops, addition features will be added as -+// suggested by the community. -+// -+//============================================================================= -+ -+#include <linux/config.h> -+#include <linux/version.h> -+#include <linux/module.h> -+#include <linux/utsname.h> -+#include <linux/kernel.h> -+#include <linux/major.h> -+#include <linux/string.h> -+#include <linux/proc_fs.h> -+#include <linux/slab.h> -+#include <linux/init.h> -+#include <linux/errno.h> -+#include <linux/fs.h> -+#include <linux/miscdevice.h> -+#include <linux/device.h> -+#include <linux/interrupt.h> -+#include <linux/moduleparam.h> -+#include <linux/timer.h> -+#include <linux/reboot.h> -+ -+#include <asm/system.h> -+#include <asm/uaccess.h> -+#include <asm/hardware.h> -+#include <asm-arm/irq.h> -+#include <asm-arm/delay.h> -+#include <asm-arm/signal.h> -+ -+/* Set this to 1 to output lots of debug messages. */ -+#if NSLU2_IO_DEBUG -+#define nslu2_io_debug(args) printk args -+#else -+#define nslu2_io_debug(args) ((void)0) -+#endif -+ -+#define VERSION "0.1.7" -+ -+#define N2RB_MAJOR 60 //rbuttons -+#define N2PB_MAJOR 61 //pbuttons -+#define N2BZ_MAJOR 62 //buzzer -+#define N2LM_MAJOR 126 -+ -+#define N2PB_IRQ 22 //gpio5 -+#define N2RB_IRQ 29 //gpio12 -+ -+#define N2_BEEP_DUR_LONG 2000 -+#define N2_BEEP_DUR_MED 400 -+#define N2_BEEP_DUR_SHORT 100 -+#define N2_BEEP_PITCH_HIGH 250 -+#define N2_BEEP_PITCH_MED 500 -+#define N2_BEEP_PITCH_LOW 1000 -+#define N2_LONG_DELAY 30000 -+ -+#define N2_BZ_GPIO 4 -+#define N2_PB_GPIO 5 -+#define N2_PO_GPIO 8 //power off -+#define N2_RB_GPIO 12 -+ -+#define GPIO_BZ_BM 0x0010 //b0000 0000 0001 0000 -+#define GPIO_PB_BM 0x0020 //b0000 0000 0010 0000 -+#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 -+#define GPIO_RB_BM 0x1000 //b0001 0000 0000 0000 -+ -+#define NOERR 0 -+ -+#define RB_DELAY 50 -+#define PB_DELAY 20 -+ -+#define PWR_OFF_STR "poweroff" -+ -+ -+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe -+ -+#define N2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible -+#define N2BZ_BEEP _IO('M',1) //one beep at current defaults -+#define N2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults -+#define N2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 -+#define N2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies -+#define N2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies -+#define N2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever -+#define N2BZ_COMBINED _IOW('M',8,long) //combine all params in a long -+ -+#define N2LM_OFF _IOW('M',32,long) -+#define N2LM_ON _IOW('M',33,long) -+#define N2LM_BLINK _IOW('M',34,long) -+#define N2LM_ALT _IOW('M',35,long) -+#define N2LM_ALL_ON _IO('M',36) -+#define N2LM_ALL_OFF _IO('M',37) -+ -+#define PHYS_LEDS 4 -+#define BLINK_DELAY 25 -+ -+// OR Masks to turn these LEDs ON -+ -+#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 -+#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 -+#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 -+ -+// AND Masks to turn these LEDs OFF -+ -+#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 -+#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 -+#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 -+ -+// AND Masks to turn these LEDs ON -+ -+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 -+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 -+ -+// Or Masks to turn these LEDs OFF -+ -+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 -+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 -+ -+// EOR masks for toggling LEDs on/off -+ -+#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits -+#define RS_GRN_TGL 0x00000002 -+#define RS_RED_TGL 0x00000001 -+#define DISK1_TGL 0x00000008 -+#define DISK2_TGL 0x00000004 -+ -+// The LED names for switches -+ -+#define LED_RS_RED 0 -+#define LED_RS_GRN 1 -+#define LED_DISK1 2 -+#define LED_DISK2 3 -+#define LED_ALL 4 -+ -+static unsigned long init_jiffy = 0; //jiffies at init time -+static unsigned long rb_presses = 0; //number of reset button presses -+static unsigned long ontime = 50; -+static unsigned long offtime = 450; -+static unsigned long bz_repeatcnt = 10; -+static unsigned long tone = 1000; -+ -+DECLARE_WAIT_QUEUE_HEAD(n2rb_waitq); -+DECLARE_WAIT_QUEUE_HEAD(n2pb_waitq); -+ -+static struct timer_list n2lm_rsg_timer; //rs green -+static struct timer_list n2lm_rsr_timer; //rs red -+static struct timer_list n2lm_d1_timer; //drive 1 -+static struct timer_list n2lm_d2_timer; //drive 2 -+static struct timer_list n2rb_timer; -+static struct timer_list n2pb_timer; -+static struct timer_list n2bz_timer; //beeper -+ -+// sysfs class -+static struct class *n2lm_class; -+ -+//================================================================================================== -+// -+// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the -+// GPIO output register is xor'd with a mask corresponding to the selected led which simply -+// flips that bit. No record of what any of the other leds is doing is needed. -+// -+//================================================================================================== -+// this blinks rs green or green/yellow if rs red is on -+static void n2lm_rsg_handler(unsigned long data) -+{ -+ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led -+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout -+ add_timer(&n2lm_rsg_timer); //reinit timer -+ return; -+} -+ -+// this blinks or alternates rs red green... inited wit green on/red off -+static void n2lm_rsr_handler(unsigned long data) -+{ -+ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; -+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_rsr_timer); -+ return; -+} -+// blinks disk 1 -+static void n2lm_d1_handler(unsigned long data) -+{ -+ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; -+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_d1_timer); -+ return; -+} -+// blinks disk 2 -+static void n2lm_d2_handler(unsigned long data) -+{ -+ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; -+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_d2_timer); -+ return; -+} -+ -+//================================================================================================== -+ -+static void n2lm_timer_start(unsigned long led) -+{ -+ -+ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); -+ -+ switch(led) { -+ case LED_RS_RED: -+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_rsr_timer); -+ break; -+ -+ case LED_RS_GRN: -+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_rsg_timer); -+ break; -+ -+ case LED_DISK1: -+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_d1_timer); -+ break; -+ -+ case LED_DISK2: -+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_d2_timer); -+ break; -+ -+ default: -+ break; -+ } -+ return; -+} -+ -+//================================================================================================== -+ -+static void n2lm_timer_stop(unsigned long led) -+{ -+ switch (led) { -+ case LED_RS_RED: -+ del_timer(&n2lm_rsr_timer); -+ break; -+ case LED_RS_GRN: -+ del_timer(&n2lm_rsg_timer); -+ break; -+ case LED_DISK1: -+ del_timer(&n2lm_d1_timer); -+ break; -+ case LED_DISK2: -+ del_timer(&n2lm_d2_timer); -+ break; -+ default: -+ break; -+ } -+ return; -+} -+ -+//-------------------------------------------------------------------------------------------------- -+ -+static void n2lm_timer_stop_all(void) -+{ -+ del_timer(&n2lm_rsg_timer); -+ del_timer(&n2lm_rsr_timer); -+ del_timer(&n2lm_d1_timer); -+ del_timer(&n2lm_d2_timer); -+ return; -+} -+//-------------------------------------------------------------------------------------------------- -+ -+static void n2lm_ledon(unsigned long led) -+{ -+ -+ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); -+ -+ switch (led) { -+ case LED_RS_RED: -+ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 -+ return; -+ case LED_RS_GRN: -+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 -+ return; -+ case LED_DISK1: -+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 -+ return; -+ case LED_DISK2: -+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb -+ return; -+ case LED_ALL: //all green -+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; -+ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); -+ return; -+ } -+} -+ -+//-------------------------------------------------------------------------------------------------- -+ -+static void n2lm_ledoff(unsigned long led) -+{ -+ -+ switch (led) { -+ case LED_RS_RED: -+ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe -+ return; -+ case LED_RS_GRN: -+ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd -+ return; -+ case LED_DISK1: -+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 -+ return; -+ case LED_DISK2: -+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 -+ return; -+ case LED_ALL: -+ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); -+ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); -+ } -+} -+ -+//================================================================================================== -+ -+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) -+{ -+ -+ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); -+ -+ if (led < 0 || led >= PHYS_LEDS) -+ return -EINVAL; -+ -+ switch (cmd ) { -+ case N2LM_ON: -+ n2lm_timer_stop(led); -+ n2lm_ledon(led); -+ break; -+ -+ case N2LM_OFF: -+ n2lm_timer_stop(led); -+ n2lm_ledoff(led); -+ break; -+ -+ case N2LM_BLINK: -+ n2lm_ledon(led); -+ if (led == LED_RS_RED) -+ n2lm_rsr_timer.data = RS_RED_TGL; -+ n2lm_timer_start(led); -+ break; -+ -+ case N2LM_ALT: -+ if (led == LED_RS_RED) -+ { -+ n2lm_ledon(LED_RS_GRN); -+ n2lm_ledoff(LED_RS_RED); -+ n2lm_rsr_timer.data = RS_RG_ALT; -+ n2lm_timer_start(LED_RS_RED); -+ break; -+ } else -+ return -EINVAL; -+ -+ case N2LM_ALL_ON: -+ n2lm_timer_stop_all(); -+ n2lm_ledon(LED_ALL); -+ break; -+ -+ case N2LM_ALL_OFF: -+ n2lm_timer_stop_all(); -+ n2lm_ledoff(LED_ALL); -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ -+ return NOERR; -+} -+ -+static struct file_operations n2lm_fops = { -+ .owner = THIS_MODULE, -+ .ioctl = n2lm_ioctl, -+}; -+//================================================================================================== -+// We can't do anything fancy here since the system tick rate is far below that required to -+// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until -+// I get up to speed on the timers. The saving grace is that for the normal uses, nothing -+// important should be haprepening. -+//================================================================================================== -+ -+static void n2_buzz(int tone_delay, int duration) -+{ -+ int i; -+ -+ *IXP4XX_GPIO_GPOER &= ~GPIO_BZ_BM; -+ -+ for (i = 1; i < duration; i++) { -+ *IXP4XX_GPIO_GPOUTR &= ~GPIO_BZ_BM; -+ udelay(tone_delay); -+ *IXP4XX_GPIO_GPOUTR |= GPIO_BZ_BM; -+ udelay(tone_delay); -+ } -+ *IXP4XX_GPIO_GPOER |= GPIO_BZ_BM; -+ -+ return; -+} -+//================================================================================================= -+ -+// this handles the buzzer duty cycle -+static void n2bz_handler(unsigned long data) -+{ -+ if (--bz_repeatcnt > 0) { //if just one beep left to do -+ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout -+ add_timer(&n2bz_timer); //reinit timer -+ } -+ n2_buzz(tone/2, ontime); -+ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); -+ return; -+} -+ -+//================================================================================================== -+ -+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) -+{ -+ switch (cmd) { -+ case N2BZ_BEEP: -+ n2_buzz(tone/2, ontime); -+ break; -+ -+ case N2BZ_BEEP_STOP: -+ del_timer(&n2bz_timer); -+ break; -+ -+ case N2BZ_BEEPS: -+ if (param == 0) -+ bz_repeatcnt = 0xffffffff; -+ else -+ bz_repeatcnt = param; -+ n2bz_handler(0); -+ break; -+ -+ case N2BZ_TONESET: -+ if (param >= 250 && param <= 2000) -+ tone = param; -+ break; -+ -+ case N2BZ_ONTIME: -+ if (param > 4 && param < 201) -+ ontime = param; -+ break; -+ -+ case N2BZ_SILENTTIME: -+ if (param > ontime) //enforce a reasonable duty cycle -+ offtime = param; -+ else -+ offtime = ontime; -+ break; -+ -+ case N2BZ_REPEATCNT: -+ if (param == 0) -+ bz_repeatcnt = 0xffffffff; -+ else -+ bz_repeatcnt = param; -+ break; -+ -+ case N2BZ_COMBINED: -+ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 -+ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies -+ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies -+ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 -+ break; -+ -+ default: -+ break; -+ } -+ return NOERR; -+} -+ -+static struct file_operations n2bz_fops = { -+ .owner = THIS_MODULE, -+ .ioctl = n2bz_ioctl, -+}; -+ -+//================================================================================================== -+ -+static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) -+{ -+ void *ret; -+ -+ wake_up(&n2pb_waitq); -+ remove_proc_entry(PWR_OFF_STR, NULL); //no parent -+ n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); -+ ret = create_proc_entry(PWR_OFF_STR, 0, NULL); -+ nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret)); -+ -+// WARNING: This is RUDE...it unconditionally pulls the power plug. -+// Your data will be at risk...since this is just a test system -+// I am leaving it enabled...eventually userland needs to get the -+// message, do an orderly shutdown and use an ioctl or something in -+// /proc/powerdowm to actually have us pull the plug. -+ -+ machine_power_off(); -+ -+ return IRQ_HANDLED; -+} -+ -+//================================================================================================== -+// -+//static void do_rb_timeout(unsigned long data) -+//{ -+// int i; -+// -+// for (i = 0; i < rb_presses; i++) -+// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); -+// return; -+//} -+// -+//================================================================================================== -+// does nothing -- waiting for userland to define -+// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so -+// we hang in a loop until the button is no longer pressed -+ -+struct testr { -+ int ctl; -+ long param; -+}; -+ -+static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) -+{ -+ -+ static struct testr test[] = { -+ { N2LM_ALL_OFF,0 }, -+ { N2LM_ON,0 }, -+ { N2LM_OFF,0 }, -+ { N2LM_ON,1 }, -+ { N2LM_ALL_OFF,1 }, -+ { N2LM_ON,2 }, -+ { N2LM_OFF,2 }, -+ { N2LM_ON,3 }, -+ { N2LM_OFF,3 }, -+ { N2LM_BLINK,0 }, -+ { N2LM_OFF,0 }, -+ { N2LM_BLINK,1 }, -+ { N2LM_OFF,1 }, -+ { N2LM_BLINK,2 }, -+ { N2LM_OFF,2 }, -+ { N2LM_BLINK,3 }, -+ { N2LM_OFF,3 }, -+ { N2LM_ALL_OFF,0 }, -+ { N2LM_ALT,1 }, -+ { N2LM_OFF,1 }, -+ { N2LM_ALL_ON,0 } -+ }; -+ -+ nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); -+ -+ wake_up(&n2rb_waitq); -+ while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) -+ ; //wait for button release -+ -+ if (rb_presses > 20) -+ rb_presses = 0; -+ tone = (rb_presses * 50) + 200; -+ ontime = (rb_presses*10) + 100; -+ offtime = 500 - (rb_presses*20); -+ nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone)); -+ rb_presses++; -+ -+ n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); -+ n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); -+// if (rb_presses == 0) { -+// init_jiffy = jiffies; -+// init_timer (&n2rb_timer); -+// n2rb_timer.function = do_rb_timeout; -+// }; -+// -+// if (rb_presses == 8) -+// rb_presses = 0; -+// if (rb_presses & 1) -+// n2lm_ledon(test[rb_presses]); -+// else -+// n2lm_ledoff(test[rb_presses]); -+// -+// n2rb_timer.expires = (jiffies + RB_DELAY); -+// add_timer (&n2rb_timer); -+// if (rb_presses < 5) { -+// if (rb_presses > 0) -+// n2lm_ledoff(rb_presses); -+// n2lm_ledon(++rb_presses); -+// n2lm_timer_start(rb_presses); -+// }; -+ -+ nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies)); -+ return IRQ_HANDLED; -+ -+} -+ -+//================================================================================================== -+// What to do here is majorly undetermined... -+ -+static int n2rb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -+{ -+ printk(KERN_DEBUG "Reset Button Wait\n"); -+ interruptible_sleep_on(&n2rb_waitq); -+ return copy_to_user(buffer, "reset", 5) ? -EFAULT : 5; -+ -+} -+ -+//================================================================================================== -+// What to do here is majorly undetermined... -+ -+static int n2pb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -+{ -+ printk(KERN_DEBUG "Power Button Wait\n"); -+ interruptible_sleep_on(&n2pb_waitq); -+ return copy_to_user(buffer, "poweroff", 8) ? -EFAULT : 8; -+ -+} -+ -+//-------------------------------------------------------------------------------------------------- -+ -+static struct file_operations n2rb_fops = { -+ .owner = THIS_MODULE, -+ .read = n2rb_read, -+}; -+ -+//-------------------------------------------------------------------------------------------------- -+ -+static struct file_operations n2pb_fops = { -+ .owner = THIS_MODULE, -+ .read = n2pb_read, -+}; -+ -+//================================================================================================== -+ -+static void n2iom_initarch(void) -+{ -+ printk(KERN_DEBUG "setup_interrupts - jiffies=%ld init_jiffy=%ld\n", jiffies, init_jiffy); -+ -+ *IXP4XX_GPIO_GPISR = 0x20400000; // read the 2 irqs to clr -+ gpio_line_config(N2_RB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+ gpio_line_isr_clear(N2_RB_GPIO); -+ gpio_line_config(N2_PB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_HIGH); -+ gpio_line_isr_clear(N2_PB_GPIO); -+ -+ init_timer(&n2lm_rsg_timer); -+ init_timer(&n2lm_rsr_timer); -+ init_timer(&n2lm_d1_timer); -+ init_timer(&n2lm_d2_timer); -+// init_timer(&n2rb_timer); -+// init_timer(&n2pb_timer); -+ init_timer(&n2bz_timer); -+ n2lm_rsr_timer.function = n2lm_rsr_handler; -+ n2lm_rsg_timer.function = n2lm_rsg_handler; -+ n2lm_d2_timer.function = n2lm_d2_handler; -+ n2lm_d1_timer.function = n2lm_d1_handler; -+ n2bz_timer.function = n2bz_handler; -+ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; -+ -+ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 -+ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds -+ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; -+ n2lm_ledon(LED_ALL); -+ n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_SHORT); -+ n2lm_ledoff(LED_ALL); -+// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit -+ n2lm_ledon(LED_RS_RED); -+ -+ return; -+} -+ -+//================================================================================================== -+ -+static int __init n2iom_init(void) -+{ -+ printk(KERN_INFO "OpenN2 Misc I/O Driver Version %s\n", VERSION); -+ -+ init_jiffy = jiffies; -+ printk(KERN_DEBUG "init_jiffy=%ld\n",init_jiffy); -+ n2iom_initarch(); -+ -+ n2lm_class = class_create(THIS_MODULE, "nslu2"); -+ -+ if (register_chrdev(N2RB_MAJOR, "n2_rbm", &n2pb_fops) < NOERR) { -+ printk(KERN_DEBUG "Reset Button Major %d not available\n", N2RB_MAJOR); -+ return -EBUSY; -+ } -+ else { -+ class_device_create(n2lm_class, MKDEV(N2RB_MAJOR, 0), NULL, "rbuttons"); -+ } -+ if (register_chrdev(N2PB_MAJOR, "n2_pbm", &n2rb_fops) < NOERR) { -+ printk(KERN_DEBUG "Power Button Major %d not available\n", N2PB_MAJOR); -+ return -EBUSY; -+ } -+ else { -+ class_device_create(n2lm_class, MKDEV(N2PB_MAJOR, 0), NULL, "pbuttons"); -+ } -+ if (register_chrdev(N2LM_MAJOR, "n2_ledm", &n2lm_fops) < NOERR) { -+ printk(KERN_DEBUG "Led Manager Major %d not available\n", N2LM_MAJOR); -+ return -EBUSY; -+ } -+ else { -+ class_device_create(n2lm_class, MKDEV(N2LM_MAJOR, 0), NULL, "leds"); -+ } -+ if (register_chrdev(N2BZ_MAJOR, "n2_bzm", &n2bz_fops) < NOERR) { -+ printk(KERN_DEBUG "Buzzer Major %d not available\n", N2BZ_MAJOR); -+ return -EBUSY; -+ } -+ else { -+ class_device_create(n2lm_class, MKDEV(N2BZ_MAJOR, 0), NULL, "buzzer"); -+ } -+ -+ if (request_irq(N2RB_IRQ, &n2rb_handler, SA_INTERRUPT, "n2_rb", NULL) < NOERR) { -+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", N2RB_IRQ); -+ return -EIO; -+ } -+ if (request_irq(N2PB_IRQ, &n2pb_handler, SA_INTERRUPT, "n2_pb", NULL) < NOERR) { -+ printk(KERN_DEBUG "Power Button IRQ %d not available\n", N2PB_IRQ); -+ return -EIO; -+ } -+ -+ enable_irq(N2PB_IRQ); -+ enable_irq(N2RB_IRQ); -+ return (NOERR); -+} -+ -+//================================================================================================== -+ -+static void __exit n2iom_exit(void) -+{ -+ remove_proc_entry(PWR_OFF_STR, NULL); -+ del_timer(&n2rb_timer); -+ free_irq(N2RB_IRQ,NULL); -+ unregister_chrdev(N2PB_MAJOR, "n2pb"); -+ class_device_destroy(n2lm_class, MKDEV(N2PB_MAJOR, 0)); -+ del_timer(&n2pb_timer); -+ free_irq(N2PB_IRQ, NULL); -+ unregister_chrdev(N2RB_MAJOR, "n2rb" ); -+ class_device_destroy(n2lm_class, MKDEV(N2RB_MAJOR, 0)); -+ del_timer(&n2lm_rsg_timer); -+ del_timer(&n2lm_rsr_timer); -+ del_timer(&n2lm_d1_timer); -+ del_timer(&n2lm_d2_timer); -+ unregister_chrdev(N2LM_MAJOR, "n2lm" ); -+ class_device_destroy(n2lm_class, MKDEV(N2LM_MAJOR, 0)); -+ unregister_chrdev(N2BZ_MAJOR, "n2bz"); -+ class_device_destroy(n2lm_class, MKDEV(N2BZ_MAJOR, 0)); -+ class_destroy(n2lm_class); -+} -+ -+module_init (n2iom_init); -+module_exit (n2iom_exit); -+ -+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -+MODULE_DESCRIPTION("OpenN2 Buttons/LEDs IO Driver"); -+MODULE_LICENSE("GPL"); -+static int debug = 7; -+module_param(debug, int, 0644); -+MODULE_PARM_DESC(debug, "Debugging enabled = 8"); -+ -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c 2005-09-16 22:44:38.000000000 +0200 -@@ -0,0 +1,120 @@ -+/* -+ * nslu2-part.c -+ * -+ * Maintainers: http://www.nslu2-linux.org/ -+ * Initial port: Mark Rakes <mrakes AT mac.com> -+ * -+ * "Parse" the fixed partition table of the Linksys NSLU2 and -+ * produce a Linux partition array to match. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/slab.h> -+#include <linux/init.h> -+#include <linux/vmalloc.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+ -+/* info we know about the NSLU2's flash setup: -+ * -+ * Num Partition offset size -+ * --- --------- ---------- ----------- -+ * 0 RedBoot 0x00000000 0x00040000 -+ * 1 System Configuration 0x00040000 0x00020000 -+ * 2 Kernel 0x00060000 0x00100000 -+ * 3 Ramdisk 0x00160000 0x006a0000 -+ */ -+ #define NSLU2_NUM_FLASH_PARTITIONS 4 -+ #define NSLU2_FLASH_PART0_NAME "RedBoot" -+ #define NSLU2_FLASH_PART0_OFFSET 0x00000000 -+ #define NSLU2_FLASH_PART0_SIZE 0x00040000 -+ #define NSLU2_FLASH_PART1_NAME "System Configuration" -+ #define NSLU2_FLASH_PART1_OFFSET (NSLU2_FLASH_PART0_OFFSET + NSLU2_FLASH_PART0_SIZE) -+ #define NSLU2_FLASH_PART1_SIZE 0x00020000 -+ #define NSLU2_FLASH_PART2_NAME "Kernel" -+ #define NSLU2_FLASH_PART2_OFFSET (NSLU2_FLASH_PART1_OFFSET + NSLU2_FLASH_PART1_SIZE) -+ #define NSLU2_FLASH_PART2_SIZE 0x00100000 -+ #define NSLU2_FLASH_PART3_NAME "Ramdisk" -+ #define NSLU2_FLASH_PART3_OFFSET (NSLU2_FLASH_PART2_OFFSET + NSLU2_FLASH_PART2_SIZE) -+ #define NSLU2_FLASH_PART3_SIZE 0x006a0000 -+ -+static int parse_nslu2_partitions(struct mtd_info *master, -+ struct mtd_partition **pparts, -+ unsigned long flash_start) -+{ -+ struct mtd_partition *parts; -+ int ret = 0, namelen = 0; -+ char *names; -+ -+ namelen = strlen(NSLU2_FLASH_PART0_NAME) + -+ strlen(NSLU2_FLASH_PART1_NAME) + -+ strlen(NSLU2_FLASH_PART2_NAME) + -+ strlen(NSLU2_FLASH_PART3_NAME) + -+ NSLU2_NUM_FLASH_PARTITIONS; /*4 strings + each terminator */ -+ -+ parts = kmalloc(sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen, GFP_KERNEL); -+ if (!parts) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ memset(parts, 0, sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen); -+ names = (char *)&parts[NSLU2_NUM_FLASH_PARTITIONS]; -+ -+ /* RedBoot partition */ -+ parts[0].size = NSLU2_FLASH_PART0_SIZE; -+ parts[0].offset = NSLU2_FLASH_PART0_OFFSET; -+ parts[0].name = NSLU2_FLASH_PART0_NAME; -+ parts[0].mask_flags = MTD_WRITEABLE; /* readonly */ -+ strcpy(names, NSLU2_FLASH_PART0_NAME); -+ names += strlen(names)+1; -+ /* System Configuration */ -+ parts[1].size = NSLU2_FLASH_PART1_SIZE; -+ parts[1].offset = NSLU2_FLASH_PART1_OFFSET; -+ parts[1].name = NSLU2_FLASH_PART1_NAME; -+ parts[1].mask_flags = MTD_WRITEABLE; /* readonly */ -+ strcpy(names, NSLU2_FLASH_PART1_NAME); -+ names += strlen(names)+1; -+ /* Kernel */ -+ parts[2].size = NSLU2_FLASH_PART2_SIZE; -+ parts[2].offset = NSLU2_FLASH_PART2_OFFSET; -+ parts[2].name = NSLU2_FLASH_PART2_NAME; -+ parts[2].mask_flags = MTD_WRITEABLE; /* readonly */ -+ strcpy(names, NSLU2_FLASH_PART2_NAME); -+ names += strlen(names)+1; -+ /* Ramdisk */ -+ parts[3].size = NSLU2_FLASH_PART3_SIZE; -+ parts[3].offset = NSLU2_FLASH_PART3_OFFSET; -+ parts[3].name = NSLU2_FLASH_PART3_NAME; -+ parts[3].mask_flags = MTD_WRITEABLE; /* readonly */ -+ strcpy(names, NSLU2_FLASH_PART3_NAME); -+ names += strlen(names)+1; -+ -+ ret = NSLU2_NUM_FLASH_PARTITIONS; -+ *pparts = parts; -+ out: -+ return ret; -+} -+ -+static struct mtd_part_parser nslu2_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = parse_nslu2_partitions, -+ .name = "NSLU2", -+}; -+ -+static int __init nslu2_parser_init(void) -+{ -+ return register_mtd_parser(&nslu2_parser); -+} -+ -+static void __exit nslu2_parser_exit(void) -+{ -+ deregister_mtd_parser(&nslu2_parser); -+} -+ -+module_init(nslu2_parser_init); -+module_exit(nslu2_parser_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Mark Rakes"); -+MODULE_DESCRIPTION("Parsing code for NSLU2 flash tables"); -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-09-16 22:43:54.000000000 +0200 -@@ -0,0 +1,87 @@ -+/* -+ * arch/arm/mach-ixp4xx/nslu2-pci.c -+ * -+ * NSLU2 board-level PCI initialization -+ * -+ * based on ixdp425-pci.c: -+ * Copyright (C) 2002 Intel Corporation. -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. -+ * -+ * Maintainer: http://www.nslu2-linux.org/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -+// However, all the common PCI setup code presumes the standard 4 PCI -+// interrupts are available. So we compromise...we don't enable the -+// IRQ on Pin 8 but we let -+ -+#include <linux/config.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+ -+#include <asm/mach/pci.h> -+#include <asm/irq.h> -+#include <asm/hardware.h> -+#include <asm/mach-types.h> -+ -+void __init nslu2_pci_preinit(void) -+{ -+ gpio_line_config(NSLU2_PCI_INTA_PIN, -+ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+ gpio_line_config(NSLU2_PCI_INTB_PIN, -+ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+ gpio_line_config(NSLU2_PCI_INTC_PIN, -+ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+// gpio_line_config(NSLU2_PCI_INTD_PIN, -+// IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+ -+ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); -+ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); -+ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); -+// gpio_line_isr_clear(NSLU2_PCI_INTD_PIN); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { -+ IRQ_NSLU2_PCI_INTA, -+ IRQ_NSLU2_PCI_INTB, -+ IRQ_NSLU2_PCI_INTC, -+// IRQ_NSLU2_PCI_INTD -+ }; -+ -+ int irq = -1; -+ -+ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && -+ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { -+ irq = pci_irq_table[(slot + pin - 2) % 3]; // ! % 4 kas11 -+ } -+ -+ return irq; -+} -+ -+struct hw_pci __initdata nslu2_pci = { -+ .nr_controllers = 1, -+ .preinit = nslu2_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = nslu2_map_irq, -+}; -+ -+int __init nslu2_pci_init(void) //monkey see, monkey do -+{ -+ if (machine_is_nslu2()) -+ pci_common_init(&nslu2_pci); -+ return 0; -+} -+ -+subsys_initcall(nslu2_pci_init); -+ -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-09-17 00:02:40.000000000 +0200 -@@ -0,0 +1,147 @@ -+/* -+ * arch/arm/mach-ixp4xx/nslu2-setup.c -+ * -+ * NSLU2 board-setup -+ * -+ * based ixdp425-setup.c: -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. -+ * -+ * Author: Mark Rakes <mrakes at mac.com> -+ * Maintainers: http://www.nslu2-linux.org/ -+ * -+ * Fixed missing init_time in MACHINE_START kas11 10/22/04 -+ * Changed to conform to new style __init ixdp425 kas11 10/22/04 -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+void __init nslu2_map_io(void) -+{ -+ ixp4xx_map_io(); -+} -+ -+static struct flash_platform_data nslu2_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource nslu2_flash_resource = { -+ .start = NSLU2_FLASH_BASE, -+ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device nslu2_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &nslu2_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &nslu2_flash_resource, -+}; -+ -+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { -+ .sda_pin = NSLU2_SDA_PIN, -+ .scl_pin = NSLU2_SCL_PIN, -+}; -+ -+static struct platform_device nslu2_i2c_controller = { -+ .name = "IXP4XX-I2C", -+ .id = 0, -+ .dev = { -+ .platform_data = &nslu2_i2c_gpio_pins, -+ }, -+ .num_resources = 0 -+}; -+ -+static struct resource nslu2_uart_resources[] = { -+ { -+ .start = IXP4XX_UART1_BASE_PHYS, -+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM -+ }, -+ { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM -+ } -+}; -+ -+static struct plat_serial8250_port nslu2_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART1_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART1, -+ .flags = UPF_BOOT_AUTOCONF, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ } -+}; -+ -+static struct platform_device nslu2_uart = { -+ .name = "serial8250", -+ .id = 0, -+ .dev.platform_data = nslu2_uart_data, -+ .num_resources = 2, -+ .resource = nslu2_uart_resources -+}; -+ -+static struct platform_device *nslu2_devices[] __initdata = { -+ &nslu2_i2c_controller, -+ &nslu2_flash, -+ &nslu2_uart -+}; -+ -+static void n2_power_off(void) -+{ -+ /* This causes the box to drop the power and go dead. */ -+#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 -+ *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio -+ *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed -+} -+ -+static void __init nslu2_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ pm_power_off = n2_power_off; -+ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); -+} -+ -+MACHINE_START(NSLU2, "Linksys NSLU2") -+ /* Maintainer: www.nslu2-linux.org */ -+ .phys_ram = PHYS_OFFSET, -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, -+ .boot_params = 0x00000100, -+ .map_io = nslu2_map_io, -+ .init_irq = ixp4xx_init_irq, //FIXME: all irq are off here -+ .timer = &ixp4xx_timer, -+ .init_machine = nslu2_init, -+ // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? -+MACHINE_END diff --git a/packages/linux/nslu2-kernel/2.6.13/55-nslu2-rpbutton.patch b/packages/linux/nslu2-kernel/2.6.13/55-nslu2-rpbutton.patch deleted file mode 100644 index b5ce101d68..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/55-nslu2-rpbutton.patch +++ /dev/null @@ -1,139 +0,0 @@ ---- nslu2-io.c.old 2da1d3f5c0aa0804c5769588337077ddcb35c5e9 -+++ linux-2.6.12.2/arch/arm/mach-ixp4xx/nslu2-io.c e895da638b4aae16a11fafe52ae0b063645a9a12 -@@ -158,6 +158,8 @@ - #define LED_DISK2 3 - #define LED_ALL 4 - -+static int nslu2_shutdown_in_progress = 0; -+ - static unsigned long init_jiffy = 0; //jiffies at init time - static unsigned long rb_presses = 0; //number of reset button presses - static unsigned long ontime = 50; -@@ -503,40 +505,20 @@ - static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) - { - void *ret; -- -- wake_up(&n2pb_waitq); -- remove_proc_entry(PWR_OFF_STR, NULL); //no parent -- n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); -- ret = create_proc_entry(PWR_OFF_STR, 0, NULL); -- nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret)); -- --// WARNING: This is RUDE...it unconditionally pulls the power plug. --// Your data will be at risk...since this is just a test system --// I am leaving it enabled...eventually userland needs to get the --// message, do an orderly shutdown and use an ioctl or something in --// /proc/powerdowm to actually have us pull the plug. -- -- machine_power_off(); -- -+ if (!nslu2_shutdown_in_progress++) { -+ wake_up(&n2pb_waitq); -+ remove_proc_entry(PWR_OFF_STR, NULL); //no parent -+ n2_buzz(N2_BEEP_PITCH_HIGH, N2_BEEP_DUR_SHORT); // Short, high-pitched "OK" -+ ret = create_proc_entry(PWR_OFF_STR, 0, NULL); -+ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret)); -+ kill_proc(1,SIGINT,1); // Signal init to shut down -+ } else { -+ n2_buzz(N2_BEEP_PITCH_LOW, N2_BEEP_DUR_MED); // Make a scary noise! -+ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine! -+ } - return IRQ_HANDLED; - } - --//================================================================================================== --// --//static void do_rb_timeout(unsigned long data) --//{ --// int i; --// --// for (i = 0; i < rb_presses; i++) --// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); --// return; --//} --// --//================================================================================================== --// does nothing -- waiting for userland to define --// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so --// we hang in a loop until the button is no longer pressed -- - struct testr { - int ctl; - long param; -@@ -544,72 +526,11 @@ - - static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) - { -+// This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable - -- static struct testr test[] = { -- { N2LM_ALL_OFF,0 }, -- { N2LM_ON,0 }, -- { N2LM_OFF,0 }, -- { N2LM_ON,1 }, -- { N2LM_ALL_OFF,1 }, -- { N2LM_ON,2 }, -- { N2LM_OFF,2 }, -- { N2LM_ON,3 }, -- { N2LM_OFF,3 }, -- { N2LM_BLINK,0 }, -- { N2LM_OFF,0 }, -- { N2LM_BLINK,1 }, -- { N2LM_OFF,1 }, -- { N2LM_BLINK,2 }, -- { N2LM_OFF,2 }, -- { N2LM_BLINK,3 }, -- { N2LM_OFF,3 }, -- { N2LM_ALL_OFF,0 }, -- { N2LM_ALT,1 }, -- { N2LM_OFF,1 }, -- { N2LM_ALL_ON,0 } -- }; -- -- nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); -- - wake_up(&n2rb_waitq); -- while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) -- ; //wait for button release -- -- if (rb_presses > 20) -- rb_presses = 0; -- tone = (rb_presses * 50) + 200; -- ontime = (rb_presses*10) + 100; -- offtime = 500 - (rb_presses*20); -- nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone)); -- rb_presses++; -- -- n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); -- n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); --// if (rb_presses == 0) { --// init_jiffy = jiffies; --// init_timer (&n2rb_timer); --// n2rb_timer.function = do_rb_timeout; --// }; --// --// if (rb_presses == 8) --// rb_presses = 0; --// if (rb_presses & 1) --// n2lm_ledon(test[rb_presses]); --// else --// n2lm_ledoff(test[rb_presses]); --// --// n2rb_timer.expires = (jiffies + RB_DELAY); --// add_timer (&n2rb_timer); --// if (rb_presses < 5) { --// if (rb_presses > 0) --// n2lm_ledoff(rb_presses); --// n2lm_ledon(++rb_presses); --// n2lm_timer_start(rb_presses); --// }; -- -- nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies)); -- return IRQ_HANDLED; -- -+ machine_power_off(); -+ return IRQ_HANDLED; // So we don't get a nobody cared error :-P - } - - //================================================================================================== diff --git a/packages/linux/nslu2-kernel/2.6.13/70-xscale-reset.patch b/packages/linux/nslu2-kernel/2.6.13/70-xscale-reset.patch deleted file mode 100644 index 4e68456e20..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/70-xscale-reset.patch +++ /dev/null @@ -1,155 +0,0 @@ ---- linux-2.6.11.2/arch/arm/mm/proc-xscale.S 2005-03-09 00:12:44.000000000 -0800 -+++ linux-2.6.11.2/arch/arm/mm/proc-xscale.S 2005-06-18 15:39:22.701222319 -0700 -@@ -137,23 +137,129 @@ - * same state as it would be if it had been reset, and branch - * to what would be the reset vector. - * -+ * This code is ixp425 specific with respect to the reset of -+ * the 'configuration register' - to be found at address -+ * 0xC40000020 'IXP425_EXP_CNFGO' -+ * - * loc: location to jump to for soft reset - */ - .align 5 - ENTRY(cpu_xscale_reset) -+ @ always branch to 0 -+ mov r0, #0 -+ -+ @ disable both FIQ and IRQ, put us into 32 bit -+ @ SVC mode (no thumb). - mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE - msr cpsr_c, r1 @ reset CPSR -- mrc p15, 0, r1, c1, c0, 0 @ ctrl register -- bic r1, r1, #0x0086 @ ........B....CA. -- bic r1, r1, #0x3900 @ ..VIZ..S........ -- mcr p15, 0, r1, c1, c0, 0 @ ctrl register -- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB -- bic r1, r1, #0x0001 @ ...............M -- mcr p15, 0, r1, c1, c0, 0 @ ctrl register -- @ CAUTION: MMU turned off from this point. We count on the pipeline -- @ already containing those two last instructions to survive. -+ -+ @ disable debug, clock and power registers are -+ @ unimplemented. -+ mcr p14, 0, r0, c10, c0, 0 @ disable debug -+ -+ @ disable the performance monitor -+ mcr p14, 0, r0, c0, c1, 0 @ PMNC (ctrl reg) -+ mcr p14, 0, r0, c4, c1, 0 @ INTEN (intrpt enable) -+ -+ @ wait for p14 to complete -+ mrc p14, 0, ip, c4, c1, 0 @ arbitrary read -+ mov ip, ip @ sync -+ -+ @ clear the PID register -+ mcr p15, 0, r0, c13, c0, 0 @ OR nothing with address! -+ -+ @ unlock the TLBs and the I/D cache locks -+ mcr p15, 0, r0, c10, c8, 1 @ data TLB unlocked -+ mcr p15, 0, r0, c10, c4, 1 @ instruction TLB unlocked -+ mcr p15, 0, r0, c9, c2, 1 @ unlock data cache -+ mcr p15, 0, r0, c9, c1, 1 @ unlock instruction cache -+ -+ @ zap the minidata cache to write through with write coalescing -+ @ disabled. -+ mov r1, #0x21 @ MD=b10, K=1 -+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer -+ mrc p15, 0, ip, c1, c0, 0 @ read of ctrl register -+ mov ip, ip @ sync -+ mcr p15, 0, r1, c1, c0, 1 @ write through, no coalesc -+ -+ @ set the control register, the MMU is enabled but everything else -+ @ is disabled at this point, r1 contains the control register flags -+ @ the process is now in little-endian mode (no matter, we aren't -+ @ going to do any <word access) -+ mov r1, #0x79 @ 00vIz0rs.b1111caM -+ orr r1, r1, #0x1000 @ I-cache enable -+ mcr p15, 0, r1, c1, c0, 0 -+ mrc p15, 0, ip, c1, c0, 0 -+ mov ip, ip @ sync to coproc -+ mov r1, #0x78 @ 00viz0rs.b1111cam -+ -+ @ and flush the I/D cache and BTB -+ mcr p15, 0, r0, c7, c7, 0 -+ -+ @ that's most of the work. The only thing which remains is to -+ @ remap the flash memory and disable the MMU. Do some setup -+ @ for this, also get ready to set the LED to red and put in -+ @ a watchdog timer. -+ -+ @ get ready to reset the configuration registers in the expansion -+ @ bus. CFGN1 disables byte swap and interrupt. -+ ldr r3, =IXP4XX_PERIPHERAL_BASE_VIRT -+ ldr r4, [r3, #IXP4XX_EXP_CFG1_OFFSET] -+ bic r4, r4, #0x13 @ -BYTE_SWAP_EN, -SW_INT? -+ str r4, [r3, #IXP4XX_EXP_CFG1_OFFSET] -+ -+ @ load the current configuration register from its -+ @ virtual address and set the MEM_MAP bit ready to map the -+ @ flash back to address 0, but don't write it yet. -+ ldr r4, [r3, #IXP4XX_EXP_CFG0_OFFSET] -+ orr r4, r4, #0x80000000 -+ -+ @ load the GPIO OUTR register address and current value, -+ @ set the low nibble to just red LED on. -+ ldr r5, =IXP4XX_GPIO_BASE_VIRT -+ ldr r6, [r5, #IXP4XX_GPIO_GPOUTR_OFFSET] -+ bic r6, r6, #0xf -+ orr r6, r6, #0xd -+ -+ @ load the watchdog timer virtual address, set the key and -+ @ the timer and start the down counter -+ ldr r7, =IXP4XX_TIMER_BASE_VIRT -+ ldr r8, =IXP4XX_WDT_KEY @ set key -+ str r8, [r7, #IXP4XX_OSWK_OFFSET] -+ mov r8, #0x1000000 @ about 0.25 seconds -+ str r8, [r7, #IXP4XX_OSWT_OFFSET] @ set timer -+ mov r8, #(IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE) -+ str r8, [r7, #IXP4XX_OSWE_OFFSET] @ enable reset -+ -+ @ invalidate the TLBs to ensure that there isn't a match for -+ @ '0' there. - mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs -- mov pc, r0 -+ mrc p15, 0, ip, c1, c0, 0 @ read of ctrl register -+ mov ip, ip @ sync -+ -+ @ remap the flash (after preloading instructions into the -+ @ I-cache) then turn off the MMU and branch to 0 when it is -+ @ off. It seems that RedBoot relies on the page tables being -+ @ set up on boot, so set the page table head register too. -+ mov r7, #0x4000 @ flash page table -+ ldr r8, =IXP4XX_GPIO_BASE_PHYS @ for led setting -+ bic r9, r6, #0xc @ disk1+disk2 led on -+ str r6, [r5, #IXP4XX_GPIO_GPOUTR_OFFSET] @ red led -+ b cache -+ -+ @ cached instructions These 8 instructions are valid in the cache -+ @ along with the associated TLB as soon as the first is executed. -+ @ They are used to effect the transition back into the flash -+ @ ROM code. -+ .align 5 -+cache: str r4, [r3, #IXP4XX_EXP_CFG0_OFFSET] @0 no memory! -+ mcr p15, 0, r7, c2, c0, 0 @1 set translation table base -+ mcr p15, 0, r1, c1, c0, 0 @2 no MMU! -+ mrc p15, 0, ip, c2, c0, 0 @3 arbitrary read of cp15 -+ str r9, [r8, #IXP4XX_GPIO_GPOUTR_OFFSET] @4 red+disk1+disk2 led -+ sub pc, r0, ip, LSR #32 @5 sync and branch to zero -+ nop @6 -+ nop @7 - - /* - * cpu_xscale_do_idle() -@@ -168,8 +274,10 @@ - .align 5 - - ENTRY(cpu_xscale_do_idle) -- mov r0, #1 -- mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE -+ @ NSLU2/ixp420: not implemented in the hardware, docs -+ @ say do not write! -+ @mov r0, #1 -+ @mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE - mov pc, lr - - /* ================================= CACHE ================================ */ diff --git a/packages/linux/nslu2-kernel/2.6.13/90-little-endian.patch b/packages/linux/nslu2-kernel/2.6.13/90-little-endian.patch deleted file mode 100644 index 1fc432b5db..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/90-little-endian.patch +++ /dev/null @@ -1,148 +0,0 @@ -diff -urpN linux-2.6.11.12/arch/arm/boot/compressed/Makefile linux-2.6.11.12-le2/arch/arm/boot/compressed/Makefile ---- linux-2.6.11.12/arch/arm/boot/compressed/Makefile 2005-06-12 04:45:37.000000000 +0200 -+++ linux-2.6.11.12-le2/arch/arm/boot/compressed/Makefile 2005-07-17 12:13:55.000000000 +0200 -@@ -56,6 +56,8 @@ endif - - ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) - OBJS += big-endian.o -+else -+OBJS += little-endian.o - endif - - # -diff -urpN linux-2.6.11.12/arch/arm/boot/compressed/little-endian.S linux-2.6.11.12-le2/arch/arm/boot/compressed/little-endian.S ---- linux-2.6.11.12/arch/arm/boot/compressed/little-endian.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.11.12-le2/arch/arm/boot/compressed/little-endian.S 2005-07-17 12:13:55.000000000 +0200 -@@ -0,0 +1,13 @@ -+/* -+ * linux/arch/arm/boot/compressed/little-endian.S -+ * -+ * Switch CPU into little endian mode. -+ * Author: Nicolas Pitre -+ */ -+ -+ .section ".start", #alloc, #execinstr -+ -+ mrc p15, 0, r0, c1, c0, 0 @ read control reg -+ bic r0, r0, #(1 << 7) @ enable little endian mode -+ mcr p15, 0, r0, c1, c0, 0 @ write control reg -+ -diff -urpN linux-2.6.11.12/arch/arm/mach-ixp4xx/common-pci.c linux-2.6.11.12-le2/arch/arm/mach-ixp4xx/common-pci.c ---- linux-2.6.11.12/arch/arm/mach-ixp4xx/common-pci.c 2005-06-12 04:45:37.000000000 +0200 -+++ linux-2.6.11.12-le2/arch/arm/mach-ixp4xx/common-pci.c 2005-07-17 12:13:55.000000000 +0200 -@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void) - #ifdef __ARMEB__ - *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; - #else -- *PCI_CSR = PCI_CSR_IC; -+ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; - #endif - - pr_debug("DONE\n"); -diff -urpN linux-2.6.11.12/drivers/mtd/maps/ixp4xx.c linux-2.6.11.12-le2/drivers/mtd/maps/ixp4xx.c ---- linux-2.6.11.12/drivers/mtd/maps/ixp4xx.c 2005-07-17 12:13:05.000000000 +0200 -+++ linux-2.6.11.12-le2/drivers/mtd/maps/ixp4xx.c 2005-07-17 12:13:55.000000000 +0200 -@@ -28,12 +28,12 @@ - #include <asm/io.h> - #include <asm/mach-types.h> - #include <asm/mach/flash.h> -- -+#include <asm/byteorder.h> - #include <asm/unaligned.h> - - #include <linux/reboot.h> - --#ifndef __ARMEB__ -+#if !defined(__ARMEB__) && !defined(CONFIG_ARCH_NSLU2) - #define BYTE0(h) ((h) & 0xFF) - #define BYTE1(h) (((h) >> 8) & 0xFF) - #else -@@ -44,6 +44,10 @@ - static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) - { - map_word val; -+ -+#ifndef __ARMEB__ -+ ofs ^= 2; -+#endif - val.x[0] = *(__u16 *) (map->map_priv_1 + ofs); - return val; - } -@@ -53,6 +57,21 @@ static map_word ixp4xx_read16(struct map - * when attached to a 16-bit wide device (such as the 28F128J3A), - * so we can't just memcpy_fromio(). - */ -+ -+#if !defined(__ARMEB__) && defined(CONFIG_MTD_REDBOOT_PARTS) -+struct fis_image_desc { -+ unsigned char name[16]; // Null terminated name -+ unsigned long flash_base; // Address within FLASH of image -+ unsigned long mem_base; // Address in memory where it executes -+ unsigned long size; // Length of image -+ unsigned long entry_point; // Execution entry point -+ unsigned long data_length; // Length of actual data -+ unsigned char _pad[256-(16+7*sizeof(unsigned long))]; -+ unsigned long desc_cksum; // Checksum over image descriptor -+ unsigned long file_cksum; // Checksum over image data -+}; -+#endif -+ - static void ixp4xx_copy_from(struct map_info *map, void *to, - unsigned long from, ssize_t len) - { -@@ -62,13 +81,34 @@ static void ixp4xx_copy_from(struct map_ - u16 data; - - for (i = 0; i < (len / 2); i++) { -- data = get_unaligned((u16*)(src + i)); -+ int j = i; -+#ifndef __ARMEB__ -+ j ^= 1; -+#endif -+ data = get_unaligned((u16*)(src + j)); - dest[i * 2] = BYTE0(data); - dest[i * 2 + 1] = BYTE1(data); - } - -+#ifndef __ARMEB__ -+ i ^= 1; -+#endif -+ - if (len & 1) - dest[len - 1] = BYTE0(get_unaligned((u16*)(src + i))); -+ -+ /* Hack: Last sector contains RedBoot FIS table in big-endian format. -+ Convert into little endian format so we can use RedBoot parser */ -+#if !defined(__ARMEB__) && defined(CONFIG_MTD_REDBOOT_PARTS) -+ if (from == 0x7e0000) { -+ struct fis_image_desc *desc = (struct fis_image_desc *)to; -+ for (i=0; i < (len/sizeof(struct fis_image_desc)); i++) { -+ desc[i].flash_base = be32_to_cpu(desc[i].flash_base); -+ desc[i].mem_base = be32_to_cpu(desc[i].mem_base); -+ desc[i].size = be32_to_cpu(desc[i].size); -+ } -+ } -+#endif - } - - /* -@@ -77,6 +117,9 @@ static void ixp4xx_copy_from(struct map_ - */ - static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) - { -+#ifndef __ARMEB__ -+ adr ^= 2; -+#endif - if (!(adr & 1)) - *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; - } -@@ -86,6 +129,9 @@ static void ixp4xx_probe_write16(struct - */ - static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) - { -+#ifndef __ARMEB__ -+ adr ^= 2; -+#endif - *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; - } - diff --git a/packages/linux/nslu2-kernel/2.6.13/95-nslu2-defconfig.patch b/packages/linux/nslu2-kernel/2.6.13/95-nslu2-defconfig.patch deleted file mode 100644 index f86830d82b..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/95-nslu2-defconfig.patch +++ /dev/null @@ -1,1442 +0,0 @@ -diff -urN linux-2.6.13.1/arch/arm/configs/nslu2_defconfig nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig ---- linux-2.6.13.1/arch/arm/configs/nslu2_defconfig 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig 2005-09-17 16:45:43.000000000 +0200 -@@ -0,0 +1,1438 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.13.1 -+# Sat Sep 17 16:45:18 2005 -+# -+CONFIG_ARM=y -+CONFIG_MMU=y -+CONFIG_UID16=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_CLEAN_COMPILE=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+ -+# -+# General setup -+# -+CONFIG_LOCALVERSION="" -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+# CONFIG_POSIX_MQUEUE is not set -+CONFIG_BSD_PROCESS_ACCT=y -+# CONFIG_BSD_PROCESS_ACCT_V3 is not set -+CONFIG_SYSCTL=y -+# CONFIG_AUDIT is not set -+CONFIG_HOTPLUG=y -+CONFIG_KOBJECT_UEVENT=y -+# CONFIG_IKCONFIG is not set -+CONFIG_EMBEDDED=y -+# CONFIG_KALLSYMS is not set -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_EPOLL=y -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SHMEM=y -+CONFIG_CC_ALIGN_FUNCTIONS=0 -+CONFIG_CC_ALIGN_LABELS=0 -+CONFIG_CC_ALIGN_LOOPS=0 -+CONFIG_CC_ALIGN_JUMPS=0 -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+CONFIG_OBSOLETE_MODPARM=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+ -+# -+# System Type -+# -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_CAMELOT is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_IOP3XX is not set -+CONFIG_ARCH_IXP4XX=y -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_OMAP is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_AAEC2000 is not set -+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -+ -+# -+# Intel IXP4xx Implementation Options -+# -+ -+# -+# IXP4xx Platforms -+# -+# CONFIG_ARCH_AVILA is not set -+# CONFIG_ARCH_ADI_COYOTE is not set -+# CONFIG_ARCH_IXDP425 is not set -+# CONFIG_MACH_IXDPG425 is not set -+# CONFIG_MACH_IXDP465 is not set -+CONFIG_ARCH_NSLU2=y -+# CONFIG_ARCH_PRPMC1100 is not set -+# CONFIG_MACH_GTWX5715 is not set -+ -+# -+# IXP4xx Options -+# -+CONFIG_IXP4XX_INDIRECT_PCI=y -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_XSCALE=y -+CONFIG_CPU_32v5=y -+CONFIG_CPU_ABRT_EV5T=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_TLB_V4WBI=y -+ -+# -+# Processor Features -+# -+# CONFIG_ARM_THUMB is not set -+CONFIG_CPU_BIG_ENDIAN=y -+CONFIG_XSCALE_PMU=y -+CONFIG_DMABOUNCE=y -+ -+# -+# Bus support -+# -+CONFIG_ISA_DMA_API=y -+CONFIG_PCI=y -+CONFIG_PCI_LEGACY_PROC=y -+# CONFIG_PCI_NAMES is not set -+# CONFIG_PCI_DEBUG is not set -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_PREEMPT is not set -+# CONFIG_NO_IDLE_HZ is not set -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="root=/dev/sda2 ro rootdelay=10 rootfstype=ext2 noinitrd noirqdebug mem=32M@0x00000000 console=ttyS0,115200n8" -+# CONFIG_XIP_KERNEL is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_ARTHUR is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+CONFIG_APM=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=m -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_BOOTP=y -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+CONFIG_INET_TUNNEL=m -+CONFIG_IP_TCPDIAG=y -+# CONFIG_IP_TCPDIAG_IPV6 is not set -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_BIC=y -+ -+# -+# IP: Virtual Server Configuration -+# -+CONFIG_IP_VS=m -+CONFIG_IP_VS_DEBUG=y -+CONFIG_IP_VS_TAB_BITS=12 -+ -+# -+# IPVS transport protocol load balancing support -+# -+# CONFIG_IP_VS_PROTO_TCP is not set -+# CONFIG_IP_VS_PROTO_UDP is not set -+# CONFIG_IP_VS_PROTO_ESP is not set -+# CONFIG_IP_VS_PROTO_AH is not set -+ -+# -+# IPVS scheduler -+# -+CONFIG_IP_VS_RR=m -+CONFIG_IP_VS_WRR=m -+CONFIG_IP_VS_LC=m -+CONFIG_IP_VS_WLC=m -+CONFIG_IP_VS_LBLC=m -+CONFIG_IP_VS_LBLCR=m -+CONFIG_IP_VS_DH=m -+CONFIG_IP_VS_SH=m -+# CONFIG_IP_VS_SED is not set -+# CONFIG_IP_VS_NQ is not set -+ -+# -+# IPVS application helper -+# -+# CONFIG_IPV6 is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_BRIDGE_NETFILTER=y -+ -+# -+# IP: Netfilter Configuration -+# -+# CONFIG_IP_NF_CONNTRACK is not set -+# CONFIG_IP_NF_CONNTRACK_MARK is not set -+# CONFIG_IP_NF_QUEUE is not set -+# CONFIG_IP_NF_IPTABLES is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# Bridge: Netfilter Configuration -+# -+# CONFIG_BRIDGE_NF_EBTABLES is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+# CONFIG_ATM is not set -+CONFIG_BRIDGE=m -+CONFIG_VLAN_8021Q=m -+# CONFIG_DECNET is not set -+CONFIG_LLC=m -+# CONFIG_LLC2 is not set -+CONFIG_IPX=m -+# CONFIG_IPX_INTERN is not set -+CONFIG_ATALK=m -+CONFIG_DEV_APPLETALK=y -+CONFIG_IPDDP=m -+CONFIG_IPDDP_ENCAP=y -+CONFIG_IPDDP_DECAP=y -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_NET_DIVERT is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+CONFIG_NET_SCHED=y -+CONFIG_NET_SCH_CLK_JIFFIES=y -+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -+# CONFIG_NET_SCH_CLK_CPU is not set -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+# CONFIG_NET_SCH_HFSC is not set -+CONFIG_NET_SCH_PRIO=m -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+# CONFIG_NET_SCH_NETEM is not set -+CONFIG_NET_SCH_INGRESS=m -+CONFIG_NET_QOS=y -+CONFIG_NET_ESTIMATOR=y -+CONFIG_NET_CLS=y -+# CONFIG_NET_CLS_BASIC is not set -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_ROUTE=y -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+# CONFIG_CLS_U32_PERF is not set -+# CONFIG_NET_CLS_IND is not set -+# CONFIG_CLS_U32_MARK is not set -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+# CONFIG_NET_EMATCH is not set -+# CONFIG_NET_CLS_ACT is not set -+CONFIG_NET_CLS_POLICE=y -+ -+# -+# Network testing -+# -+CONFIG_NET_PKTGEN=m -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+CONFIG_BT=m -+CONFIG_BT_L2CAP=m -+CONFIG_BT_SCO=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+# CONFIG_BT_HIDP is not set -+ -+# -+# Bluetooth device drivers -+# -+CONFIG_BT_HCIUSB=m -+CONFIG_BT_HCIUSB_SCO=y -+# CONFIG_BT_HCIUART is not set -+# CONFIG_BT_HCIBCM203X is not set -+# CONFIG_BT_HCIBPA10X is not set -+# CONFIG_BT_HCIBFUSB is not set -+# CONFIG_BT_HCIVHCI is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+ -+# -+# Memory Technology Devices (MTD) -+# -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+CONFIG_MTD_CONCAT=y -+CONFIG_MTD_PARTITIONS=y -+CONFIG_MTD_REDBOOT_PARTS=y -+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+# CONFIG_MTD_XIP is not set -+ -+# -+# Mapping drivers for chip access -+# -+CONFIG_MTD_COMPLEX_MAPPINGS=y -+# CONFIG_MTD_PHYSMAP is not set -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+CONFIG_MTD_IXP4XX=y -+# CONFIG_MTD_EDB7312 is not set -+# CONFIG_MTD_PCI is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_PMC551 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLKMTD is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+ -+# -+# NAND Flash Device Drivers -+# -+# CONFIG_MTD_NAND is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play support -+# -+ -+# -+# Block devices -+# -+# CONFIG_BLK_CPQ_DA is not set -+# CONFIG_BLK_CPQ_CISS_DA is not set -+# CONFIG_BLK_DEV_DAC960 is not set -+# CONFIG_BLK_DEV_UMEM is not set -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_SX8 is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=10240 -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+# CONFIG_CDROM_PKTCDVD is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+CONFIG_IOSCHED_DEADLINE=y -+# CONFIG_IOSCHED_CFQ is not set -+# CONFIG_ATA_OVER_ETH is not set -+ -+# -+# ATA/ATAPI/MFM/RLL support -+# -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+CONFIG_SCSI=y -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI Transport Attributes -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -+# CONFIG_SCSI_3W_9XXX is not set -+# CONFIG_SCSI_ACARD is not set -+# CONFIG_SCSI_AACRAID is not set -+# CONFIG_SCSI_AIC7XXX is not set -+# CONFIG_SCSI_AIC7XXX_OLD is not set -+# CONFIG_SCSI_AIC79XX is not set -+# CONFIG_SCSI_DPT_I2O is not set -+# CONFIG_MEGARAID_NEWGEN is not set -+# CONFIG_MEGARAID_LEGACY is not set -+# CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_BUSLOGIC is not set -+# CONFIG_SCSI_DMX3191D is not set -+# CONFIG_SCSI_EATA is not set -+# CONFIG_SCSI_FUTURE_DOMAIN is not set -+# CONFIG_SCSI_GDTH is not set -+# CONFIG_SCSI_IPS is not set -+# CONFIG_SCSI_INITIO is not set -+# CONFIG_SCSI_INIA100 is not set -+# CONFIG_SCSI_SYM53C8XX_2 is not set -+# CONFIG_SCSI_IPR is not set -+# CONFIG_SCSI_QLOGIC_FC is not set -+# CONFIG_SCSI_QLOGIC_1280 is not set -+CONFIG_SCSI_QLA2XXX=y -+# CONFIG_SCSI_QLA21XX is not set -+# CONFIG_SCSI_QLA22XX is not set -+# CONFIG_SCSI_QLA2300 is not set -+# CONFIG_SCSI_QLA2322 is not set -+# CONFIG_SCSI_QLA6312 is not set -+# CONFIG_SCSI_QLA24XX is not set -+# CONFIG_SCSI_LPFC is not set -+# CONFIG_SCSI_DC395x is not set -+# CONFIG_SCSI_DC390T is not set -+# CONFIG_SCSI_NSP32 is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+CONFIG_MD=y -+CONFIG_BLK_DEV_MD=m -+# CONFIG_MD_LINEAR is not set -+CONFIG_MD_RAID0=m -+CONFIG_MD_RAID1=m -+# CONFIG_MD_RAID10 is not set -+CONFIG_MD_RAID5=m -+# CONFIG_MD_RAID6 is not set -+# CONFIG_MD_MULTIPATH is not set -+# CONFIG_MD_FAULTY is not set -+# CONFIG_BLK_DEV_DM is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+# CONFIG_FUSION_SPI is not set -+# CONFIG_FUSION_FC is not set -+ -+# -+# IEEE 1394 (FireWire) support -+# -+# CONFIG_IEEE1394 is not set -+ -+# -+# I2O device support -+# -+# CONFIG_I2O is not set -+ -+# -+# Network device support -+# -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+ -+# -+# ARCnet devices -+# -+# CONFIG_ARCNET is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_HAPPYMEAL is not set -+# CONFIG_SUNGEM is not set -+# CONFIG_NET_VENDOR_3COM is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+ -+# -+# Tulip family network device support -+# -+# CONFIG_NET_TULIP is not set -+# CONFIG_HP100 is not set -+CONFIG_NET_PCI=y -+# CONFIG_PCNET32 is not set -+# CONFIG_AMD8111_ETH is not set -+# CONFIG_ADAPTEC_STARFIRE is not set -+# CONFIG_B44 is not set -+# CONFIG_FORCEDETH is not set -+# CONFIG_DGRS is not set -+# CONFIG_EEPRO100 is not set -+# CONFIG_E100 is not set -+# CONFIG_FEALNX is not set -+# CONFIG_NATSEMI is not set -+# CONFIG_NE2K_PCI is not set -+# CONFIG_8139CP is not set -+# CONFIG_8139TOO is not set -+# CONFIG_SIS900 is not set -+# CONFIG_EPIC100 is not set -+# CONFIG_SUNDANCE is not set -+# CONFIG_TLAN is not set -+# CONFIG_VIA_RHINE is not set -+ -+# -+# Ethernet (1000 Mbit) -+# -+# CONFIG_ACENIC is not set -+# CONFIG_DL2K is not set -+# CONFIG_E1000 is not set -+# CONFIG_NS83820 is not set -+# CONFIG_HAMACHI is not set -+# CONFIG_YELLOWFIN is not set -+# CONFIG_R8169 is not set -+# CONFIG_SKGE is not set -+# CONFIG_SK98LIN is not set -+# CONFIG_VIA_VELOCITY is not set -+# CONFIG_TIGON3 is not set -+# CONFIG_BNX2 is not set -+ -+# -+# Ethernet (10000 Mbit) -+# -+# CONFIG_IXGB is not set -+# CONFIG_S2IO is not set -+ -+# -+# Token Ring devices -+# -+# CONFIG_TR is not set -+ -+# -+# Wireless LAN (non-hamradio) -+# -+CONFIG_NET_RADIO=y -+ -+# -+# Obsolete Wireless cards support (pre-802.11) -+# -+# CONFIG_STRIP is not set -+ -+# -+# Wireless 802.11b ISA/PCI cards support -+# -+# CONFIG_HERMES is not set -+# CONFIG_ATMEL is not set -+ -+# -+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -+# -+# CONFIG_PRISM54 is not set -+CONFIG_NET_WIRELESS=y -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+# CONFIG_FDDI is not set -+# CONFIG_HIPPI is not set -+CONFIG_PPP=m -+# CONFIG_PPP_MULTILINK is not set -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+# CONFIG_PPPOE is not set -+# CONFIG_SLIP is not set -+# CONFIG_NET_FC is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+# CONFIG_INPUT is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+# CONFIG_VT is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+CONFIG_SERIAL_8250=y -+CONFIG_SERIAL_8250_CONSOLE=y -+CONFIG_SERIAL_8250_NR_UARTS=2 -+# CONFIG_SERIAL_8250_EXTENDED is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+# CONFIG_SERIAL_JSM is not set -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+ -+# -+# IPMI -+# -+# CONFIG_IPMI_HANDLER is not set -+ -+# -+# Watchdog Cards -+# -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_IXP4XX_WATCHDOG=y -+ -+# -+# PCI-based Watchdog Cards -+# -+# CONFIG_PCIPCWATCHDOG is not set -+# CONFIG_WDTPCI is not set -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+# CONFIG_NVRAM is not set -+# CONFIG_RTC is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+# CONFIG_APPLICOM is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_DRM is not set -+# CONFIG_RAW_DRIVER is not set -+ -+# -+# TPM devices -+# -+# CONFIG_TCG_TPM is not set -+ -+# -+# I2C support -+# -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=y -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_ALI1535 is not set -+# CONFIG_I2C_ALI1563 is not set -+# CONFIG_I2C_ALI15X3 is not set -+# CONFIG_I2C_AMD756 is not set -+# CONFIG_I2C_AMD8111 is not set -+# CONFIG_I2C_I801 is not set -+# CONFIG_I2C_I810 is not set -+# CONFIG_I2C_PIIX4 is not set -+# CONFIG_I2C_IOP3XX is not set -+# CONFIG_I2C_ISA is not set -+CONFIG_I2C_IXP4XX=y -+# CONFIG_I2C_NFORCE2 is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_PROSAVAGE is not set -+# CONFIG_I2C_SAVAGE4 is not set -+# CONFIG_SCx200_ACB is not set -+# CONFIG_I2C_SIS5595 is not set -+# CONFIG_I2C_SIS630 is not set -+# CONFIG_I2C_SIS96X is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_VIA is not set -+# CONFIG_I2C_VIAPRO is not set -+# CONFIG_I2C_VOODOO3 is not set -+# CONFIG_I2C_PCA_ISA is not set -+CONFIG_I2C_SENSOR=y -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+CONFIG_SENSORS_EEPROM=y -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_RTC8564 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+CONFIG_SENSORS_X1205=y -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# Hardware Monitoring support -+# -+# CONFIG_HWMON is not set -+ -+# -+# Misc devices -+# -+ -+# -+# Multimedia devices -+# -+CONFIG_VIDEO_DEV=m -+ -+# -+# Video For Linux -+# -+ -+# -+# Video Adapters -+# -+# CONFIG_VIDEO_BT848 is not set -+# CONFIG_VIDEO_CPIA is not set -+# CONFIG_VIDEO_SAA5246A is not set -+# CONFIG_VIDEO_SAA5249 is not set -+# CONFIG_TUNER_3036 is not set -+# CONFIG_VIDEO_STRADIS is not set -+# CONFIG_VIDEO_ZORAN is not set -+# CONFIG_VIDEO_SAA7134 is not set -+# CONFIG_VIDEO_MXB is not set -+# CONFIG_VIDEO_DPC is not set -+# CONFIG_VIDEO_HEXIUM_ORION is not set -+# CONFIG_VIDEO_HEXIUM_GEMINI is not set -+# CONFIG_VIDEO_CX88 is not set -+# CONFIG_VIDEO_OVCAMCHIP is not set -+ -+# -+# Radio Adapters -+# -+# CONFIG_RADIO_GEMTEK_PCI is not set -+# CONFIG_RADIO_MAXIRADIO is not set -+# CONFIG_RADIO_MAESTRO is not set -+ -+# -+# Digital Video Broadcasting Devices -+# -+# CONFIG_DVB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_FB is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+ -+# -+# Advanced Linux Sound Architecture -+# -+CONFIG_SND=y -+CONFIG_SND_TIMER=y -+CONFIG_SND_PCM=y -+CONFIG_SND_HWDEP=y -+CONFIG_SND_RAWMIDI=y -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=y -+CONFIG_SND_PCM_OSS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+ -+# -+# Generic devices -+# -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+ -+# -+# PCI devices -+# -+# CONFIG_SND_ALI5451 is not set -+# CONFIG_SND_ATIIXP is not set -+# CONFIG_SND_ATIIXP_MODEM is not set -+# CONFIG_SND_AU8810 is not set -+# CONFIG_SND_AU8820 is not set -+# CONFIG_SND_AU8830 is not set -+# CONFIG_SND_AZT3328 is not set -+# CONFIG_SND_BT87X is not set -+# CONFIG_SND_CS46XX is not set -+# CONFIG_SND_CS4281 is not set -+# CONFIG_SND_EMU10K1 is not set -+# CONFIG_SND_EMU10K1X is not set -+# CONFIG_SND_CA0106 is not set -+# CONFIG_SND_KORG1212 is not set -+# CONFIG_SND_MIXART is not set -+# CONFIG_SND_NM256 is not set -+# CONFIG_SND_RME32 is not set -+# CONFIG_SND_RME96 is not set -+# CONFIG_SND_RME9652 is not set -+# CONFIG_SND_HDSP is not set -+# CONFIG_SND_HDSPM is not set -+# CONFIG_SND_TRIDENT is not set -+# CONFIG_SND_YMFPCI is not set -+# CONFIG_SND_ALS4000 is not set -+# CONFIG_SND_CMIPCI is not set -+# CONFIG_SND_ENS1370 is not set -+# CONFIG_SND_ENS1371 is not set -+# CONFIG_SND_ES1938 is not set -+# CONFIG_SND_ES1968 is not set -+# CONFIG_SND_MAESTRO3 is not set -+# CONFIG_SND_FM801 is not set -+# CONFIG_SND_ICE1712 is not set -+# CONFIG_SND_ICE1724 is not set -+# CONFIG_SND_INTEL8X0 is not set -+# CONFIG_SND_INTEL8X0M is not set -+# CONFIG_SND_SONICVIBES is not set -+# CONFIG_SND_VIA82XX is not set -+# CONFIG_SND_VIA82XX_MODEM is not set -+# CONFIG_SND_VX222 is not set -+# CONFIG_SND_HDA_INTEL is not set -+ -+# -+# ALSA ARM devices -+# -+ -+# -+# USB devices -+# -+CONFIG_SND_USB_AUDIO=y -+ -+# -+# Open Sound System -+# -+# CONFIG_SOUND_PRIME is not set -+ -+# -+# USB support -+# -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_BANDWIDTH is not set -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_SUSPEND is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+CONFIG_USB_EHCI_HCD=y -+# CONFIG_USB_EHCI_SPLIT_ISO is not set -+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_UHCI_HCD is not set -+# CONFIG_USB_SL811_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_AUDIO is not set -+ -+# -+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -+# -+# CONFIG_USB_MIDI is not set -+CONFIG_USB_ACM=m -+CONFIG_USB_PRINTER=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+CONFIG_USB_STORAGE_DATAFAB=y -+CONFIG_USB_STORAGE_FREECOM=y -+CONFIG_USB_STORAGE_DPCM=y -+CONFIG_USB_STORAGE_USBAT=y -+CONFIG_USB_STORAGE_SDDR09=y -+CONFIG_USB_STORAGE_SDDR55=y -+CONFIG_USB_STORAGE_JUMPSHOT=y -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=m -+ -+# -+# Input core support is needed for USB HID input layer or HIDBP support -+# -+CONFIG_USB_HIDDEV=y -+ -+# -+# USB HID Boot Protocol drivers -+# -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB Multimedia devices -+# -+# CONFIG_USB_DABUSB is not set -+# CONFIG_USB_VICAM is not set -+# CONFIG_USB_DSBR is not set -+# CONFIG_USB_IBMCAM is not set -+# CONFIG_USB_KONICAWC is not set -+# CONFIG_USB_OV511 is not set -+# CONFIG_USB_SE401 is not set -+# CONFIG_USB_SN9C102 is not set -+# CONFIG_USB_STV680 is not set -+# CONFIG_USB_PWC is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=y -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=y -+CONFIG_USB_RTL8150=y -+CONFIG_USB_USBNET=y -+ -+# -+# USB Host-to-Host Cables -+# -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_BELKIN=y -+CONFIG_USB_GENESYS=y -+CONFIG_USB_NET1080=y -+CONFIG_USB_PL2301=y -+CONFIG_USB_KC2190=y -+ -+# -+# Intelligent USB Devices/Gadgets -+# -+CONFIG_USB_ARMLINUX=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_ZAURUS=y -+CONFIG_USB_CDCETHER=y -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_AX8817X=y -+# CONFIG_USB_ZD1201 is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+# CONFIG_USB_SERIAL_AIRPRIME is not set -+CONFIG_USB_SERIAL_BELKIN=m -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP2101=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+# CONFIG_USB_SERIAL_KEYSPAN is not set -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_PL2303=m -+CONFIG_USB_SERIAL_HP4X=m -+# CONFIG_USB_SERIAL_SAFE is not set -+# CONFIG_USB_SERIAL_TI is not set -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OMNINET=m -+CONFIG_USB_EZUSB=y -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+CONFIG_USB_LCD=m -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGETKIT is not set -+# CONFIG_USB_PHIDGETSERVO is not set -+# CONFIG_USB_IDMOUSE is not set -+CONFIG_USB_SISUSBVGA=m -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+# CONFIG_USB_GADGET is not set -+ -+# -+# MMC/SD Card support -+# -+# CONFIG_MMC is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_REISERFS_FS=m -+# CONFIG_REISERFS_CHECK is not set -+# CONFIG_REISERFS_PROC_INFO is not set -+# CONFIG_REISERFS_FS_XATTR is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+ -+# -+# XFS support -+# -+# CONFIG_XFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_INOTIFY is not set -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=m -+# CONFIG_JOLIET is not set -+# CONFIG_ZISOFS is not set -+CONFIG_UDF_FS=m -+CONFIG_UDF_NLS=y -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="utf8" -+CONFIG_NTFS_FS=m -+# CONFIG_NTFS_DEBUG is not set -+# CONFIG_NTFS_RW is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_SYSFS=y -+# CONFIG_DEVPTS_FS_XATTR is not set -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_XATTR is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+# CONFIG_JFFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+# CONFIG_JFFS2_FS_WRITEBUFFER is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+CONFIG_NFS_FS=m -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+CONFIG_NFSD=m -+# CONFIG_NFSD_V3 is not set -+CONFIG_NFSD_TCP=y -+CONFIG_LOCKD=m -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=m -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+CONFIG_SMB_FS=m -+# CONFIG_SMB_NLS_DEFAULT is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=m -+CONFIG_NLS_CODEPAGE_737=m -+CONFIG_NLS_CODEPAGE_775=m -+CONFIG_NLS_CODEPAGE_850=m -+CONFIG_NLS_CODEPAGE_852=m -+CONFIG_NLS_CODEPAGE_855=m -+CONFIG_NLS_CODEPAGE_857=m -+CONFIG_NLS_CODEPAGE_860=m -+CONFIG_NLS_CODEPAGE_861=m -+CONFIG_NLS_CODEPAGE_862=m -+CONFIG_NLS_CODEPAGE_863=m -+CONFIG_NLS_CODEPAGE_864=m -+CONFIG_NLS_CODEPAGE_865=m -+CONFIG_NLS_CODEPAGE_866=m -+CONFIG_NLS_CODEPAGE_869=m -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+CONFIG_NLS_CODEPAGE_932=m -+CONFIG_NLS_CODEPAGE_949=m -+CONFIG_NLS_CODEPAGE_874=m -+CONFIG_NLS_ISO8859_8=m -+CONFIG_NLS_CODEPAGE_1250=m -+CONFIG_NLS_CODEPAGE_1251=m -+CONFIG_NLS_ASCII=m -+CONFIG_NLS_ISO8859_1=m -+CONFIG_NLS_ISO8859_2=m -+CONFIG_NLS_ISO8859_3=m -+CONFIG_NLS_ISO8859_4=m -+CONFIG_NLS_ISO8859_5=m -+CONFIG_NLS_ISO8859_6=m -+CONFIG_NLS_ISO8859_7=m -+CONFIG_NLS_ISO8859_9=m -+CONFIG_NLS_ISO8859_13=m -+CONFIG_NLS_ISO8859_14=m -+CONFIG_NLS_ISO8859_15=m -+CONFIG_NLS_KOI8_R=m -+CONFIG_NLS_KOI8_U=m -+CONFIG_NLS_UTF8=m -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_MAGIC_SYSRQ=y -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_DEBUG_SLAB is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_FS is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_DEBUG_USER is not set -+# CONFIG_DEBUG_WAITQ is not set -+CONFIG_DEBUG_ERRORS=y -+CONFIG_DEBUG_LL=y -+# CONFIG_DEBUG_ICEDCC is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+ -+# -+# Cryptographic options -+# -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_NULL=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=m -+CONFIG_CRYPTO_SHA1=m -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_DES=m -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_AES=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_ARC4=m -+CONFIG_CRYPTO_KHAZAD=m -+CONFIG_CRYPTO_ANUBIS=m -+CONFIG_CRYPTO_DEFLATE=m -+CONFIG_CRYPTO_MICHAEL_MIC=m -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_TEST=m -+ -+# -+# Hardware crypto devices -+# -+ -+# -+# Library routines -+# -+CONFIG_CRC_CCITT=m -+CONFIG_CRC32=y -+CONFIG_LIBCRC32C=m -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/nslu2-kernel/2.6.13/96-nslu2-le-defconfig.patch b/packages/linux/nslu2-kernel/2.6.13/96-nslu2-le-defconfig.patch deleted file mode 100644 index 4b6e28a878..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/96-nslu2-le-defconfig.patch +++ /dev/null @@ -1,29 +0,0 @@ -diff -urN nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig test/arch/arm/configs/nslu2_defconfig ---- nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig 2005-09-17 16:45:43.000000000 +0200 -+++ test/arch/arm/configs/nslu2_defconfig 2005-09-17 16:46:48.000000000 +0200 -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit - # Linux kernel version: 2.6.13.1 --# Sat Sep 17 16:45:18 2005 -+# Sat Sep 17 16:23:38 2005 - # - CONFIG_ARM=y - CONFIG_MMU=y -@@ -120,7 +120,7 @@ - # Processor Features - # - # CONFIG_ARM_THUMB is not set --CONFIG_CPU_BIG_ENDIAN=y -+# CONFIG_CPU_BIG_ENDIAN is not set - CONFIG_XSCALE_PMU=y - CONFIG_DMABOUNCE=y - -@@ -168,6 +168,7 @@ - # At least one emulation must be selected - # - CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set - # CONFIG_FPE_FASTFPE is not set - - # diff --git a/packages/linux/nslu2-kernel/2.6.13/defconfig b/packages/linux/nslu2-kernel/2.6.13/defconfig deleted file mode 100644 index 1124139026..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/defconfig +++ /dev/null @@ -1,1253 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.13.2 -# Fri Sep 23 02:19:35 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_BASE_FULL is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -CONFIG_ARCH_IXP4XX=y -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP4xx Implementation Options -# - -# -# IXP4xx Platforms -# -# CONFIG_ARCH_AVILA is not set -# CONFIG_ARCH_ADI_COYOTE is not set -# CONFIG_ARCH_IXDP425 is not set -# CONFIG_MACH_IXDPG425 is not set -# CONFIG_MACH_IXDP465 is not set -CONFIG_ARCH_NSLU2=y -# CONFIG_ARCH_PRPMC1100 is not set -# CONFIG_MACH_GTWX5715 is not set - -# -# IXP4xx Options -# -CONFIG_IXP4XX_INDIRECT_PCI=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y -CONFIG_DMABOUNCE=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc noirqdebug console=ttyS0,115200n8" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -# CONFIG_BT_HIDP is not set - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP4XX=y -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 -CONFIG_BLK_DEV_RAM_SIZE=10240 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP4XX_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=m -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_IOP3XX is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_IXP4XX=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_SENSORS_X1205=y -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y -CONFIG_USB_KC2190=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -# CONFIG_USB_SERIAL_KEYSPAN is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=m -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="utf8" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y |