1 files changed, 0 insertions, 132 deletions
diff --git a/packages/linux/nas100d-kernel/2.6.14/nas100d-setup.c b/packages/linux/nas100d-kernel/2.6.14/nas100d-setup.c
deleted file mode 100644
index 0dbb0b4e69..0000000000
--- a/packages/linux/nas100d-kernel/2.6.14/nas100d-setup.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nas100d-setup.c
- *
- * NAS 100d board-setup
- *
- * based ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Maintainers: http://www.nslu2-linux.org/
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-static struct flash_platform_data nas100d_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource nas100d_flash_resource = {
-	.start			= NAS100D_FLASH_BASE,
-	.end			= NAS100D_FLASH_BASE + NAS100D_FLASH_SIZE,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device nas100d_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev.platform_data	= &nas100d_flash_data,
-	.num_resources		= 1,
-	.resource		= &nas100d_flash_resource,
-};
-
-static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
-	.sda_pin		= NAS100D_SDA_PIN,
-	.scl_pin		= NAS100D_SCL_PIN,
-};
-
-static struct platform_device nas100d_i2c_controller = {
-	.name			= "IXP4XX-I2C",
-	.id			= 0,
-	.dev.platform_data	= &nas100d_i2c_gpio_pins,
-	.num_resources		= 0,
-};
-
-static struct resource nas100d_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port nas100d_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device nas100d_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= nas100d_uart_data,
-	.num_resources		= 2,
-	.resource		= nas100d_uart_resources,
-};
-
-static struct platform_device *nas100d_devices[] __initdata = {
-	&nas100d_i2c_controller,
-	&nas100d_flash,
-	&nas100d_uart,
-};
-
-static void nas100d_power_off(void)
-{
-	/* This causes the box to drop the power and go dead. */
-
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
-}
-
-static void __init nas100d_init(void)
-{
-	ixp4xx_sys_init();
-
-	pm_power_off = nas100d_power_off;
-
-	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
-}
-
-MACHINE_START(NAS100D, "Iomega NAS 100d")
-	/* Maintainer: www.nslu2-linux.org */
-	.phys_ram	= PHYS_OFFSET,
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-	.boot_params	= 0x00000100,
-	.map_io		= ixp4xx_map_io,
-	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
-	.init_machine	= nas100d_init,
-MACHINE_END