1 files changed, 0 insertions, 72 deletions
diff --git a/packages/linux/linux-openmoko-2.6.28/0005-debug-glamo-allow-slower-memory-bus.patch.patch b/packages/linux/linux-openmoko-2.6.28/0005-debug-glamo-allow-slower-memory-bus.patch.patch
deleted file mode 100644
index 39ae653fef..0000000000
--- a/packages/linux/linux-openmoko-2.6.28/0005-debug-glamo-allow-slower-memory-bus.patch.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 8c787f1c57c3b09beece662faabfab419ae5c8d6 Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Wed, 28 Jan 2009 09:58:59 +0000
-Subject: [PATCH 5/8] debug-glamo-allow-slower-memory-bus.patch
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- drivers/mfd/glamo/glamo-core.c |   34 +++++++++++++++++++++++++++++++++-
- 1 files changed, 33 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c
-index b4595a8..e6253de 100644
---- a/drivers/mfd/glamo/glamo-core.c
-+++ b/drivers/mfd/glamo/glamo-core.c
-@@ -58,6 +58,25 @@
- 
- #define GLAMO_MEM_REFRESH_COUNT 0x100
- 
-+
-+/*
-+ * Glamo internal settings
-+ *
-+ * We run the memory interface from the faster PLLB on 2.6.28 kernels and
-+ * above.  Couple of GTA02 users report trouble with memory bus when they
-+ * upgraded from 2.6.24.  So this parameter allows reversion to 2.6.24
-+ * scheme if their Glamo chip needs it.
-+ *
-+ * you can override the faster default on kernel commandline using
-+ *
-+ *   glamo3362.slow_memory=1
-+ *
-+ * for example
-+ */
-+
-+static int slow_memory = 0;
-+module_param(slow_memory, int, 0644);
-+
- struct reg_range {
- 	int start;
- 	int count;
-@@ -786,6 +805,19 @@ int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script,
- 			while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3)
- 				;
- 			break;
-+
-+		/*
-+		 * couple of people reported artefacts with 2.6.28 changes, this
-+		 * allows reversion to 2.6.24 settings
-+		 */
-+
-+		case 0x200:
-+			if (slow_memory)
-+				__reg_write(glamo, script[i].reg, 0xef0);
-+			else
-+				__reg_write(glamo, script[i].reg, 0xe03);
-+			break;
-+
- 		default:
- 			__reg_write(glamo, script[i].reg, script[i].val);
- 			break;
-@@ -848,7 +880,7 @@ static struct glamo_script glamo_init_script[] = {
- 	 * b7..b4 = 0 = no wait states on read or write
- 	 * b0 = 1 select PLL2 for Host interface, b1 = enable it
- 	 */
--	{ 0x200,	0x0e03 },
-+	{ 0x200,	0x0e03 /* this is replaced by script parser */ },
- 	{ 0x202, 	0x07ff },
- 	{ 0x212,	0x0000 },
- 	{ 0x214,	0x4000 },
--- 
-1.5.2.2
-