diff options
Diffstat (limited to 'packages/linux/linux-omap')
| -rw-r--r-- | packages/linux/linux-omap/omap3evm/omap3evm-dss2.diff | 443 |
1 files changed, 443 insertions, 0 deletions
diff --git a/packages/linux/linux-omap/omap3evm/omap3evm-dss2.diff b/packages/linux/linux-omap/omap3evm/omap3evm-dss2.diff new file mode 100644 index 0000000000..afcebba10f --- /dev/null +++ b/packages/linux/linux-omap/omap3evm/omap3evm-dss2.diff @@ -0,0 +1,443 @@ +From: hvaibhav@ti.com +To: linux-fbdev-devel@lists.sourceforge.net, linux-omap@vger.kernel.org +Cc: Vaibhav Hiremath <hvaibhav@ti.com> +Subject: [REVIEW PATCH] Added OMAP3EVM support on Tomis FBDEV/DSS Patches +Date: Fri, 14 Nov 2008 12:02:32 +0530 + +From: Vaibhav Hiremath <hvaibhav@ti.com> + +Tested LCD, TV, DVI (480P) out on OMAP3EVM board. + +Please make sure that you change the option +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=7 and apply the +Mans Rullgard clock patches to support set_rate and round_rate API. + +Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> +--- + arch/arm/mach-omap2/board-omap3evm.c | 224 ++++++++++++++++++++++++++++++++-- + drivers/video/omap2/Kconfig | 5 + + drivers/video/omap2/Makefile | 1 + + drivers/video/omap2/panel-omap3evm.c | 110 +++++++++++++++++ + 5 files changed, 341 insertions(+), 53 deletions(-) + create mode 100644 drivers/video/omap2/panel-omap3evm.c + +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index 42ab826..e244fa7 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -37,6 +37,8 @@ + #include <mach/usb-ehci.h> + #include <mach/common.h> + #include <mach/mcspi.h> ++#include <mach/omapfb.h> ++#include <mach/display.h> + + #include "sdram-micron-mt46h32m32lf-6.h" + #include "twl4030-generic-scripts.h" +@@ -161,14 +163,215 @@ static int __init omap3_evm_i2c_init(void) + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; + } ++static struct omap_fbmem_config evm_fbmem0_config = { ++ .size = 480*720*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; + +-static struct platform_device omap3_evm_lcd_device = { +- .name = "omap3evm_lcd", +- .id = -1, ++static struct omap_fbmem_config evm_fbmem1_config = { ++ .size = 480*720*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, + }; + +-static struct omap_lcd_config omap3_evm_lcd_config __initdata = { +- .ctrl_name = "internal", ++static struct omap_fbmem_config evm_fbmem2_config = { ++ .size = 480*720*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; ++#define LCD_PANEL_LR 2 ++#define LCD_PANEL_UD 3 ++#define LCD_PANEL_INI 152 ++#define LCD_PANEL_ENABLE_GPIO 153 ++#define LCD_PANEL_QVGA 154 ++#define LCD_PANEL_RESB 155 ++ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++#define ENABLE_VPLL2_DEDICATED 0x05 ++#define ENABLE_VPLL2_DEV_GRP 0xE0 ++ ++#define TWL4030_GPIODATA_IN3 0x03 ++#define TWL4030_GPIODATA_DIR3 0x06 ++#define TWL4030_VPLL2_DEV_GRP 0x33 ++#define TWL4030_VPLL2_DEDICATED 0x36 ++ ++static int lcd_enabled; ++static int dvi_enabled; ++ ++static void __init evm_display_init(void) ++{ ++ int r; ++ r = gpio_request(LCD_PANEL_LR, "lcd_panel_lr"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_LR\n"); ++ return; ++ } ++ r = gpio_request(LCD_PANEL_UD, "lcd_panel_ud"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_UD\n"); ++ goto err_1; ++ } ++ ++ r = gpio_request(LCD_PANEL_INI, "lcd_panel_ini"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_INI\n"); ++ goto err_2; ++ } ++ r = gpio_request(LCD_PANEL_RESB, "lcd_panel_resb"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_RESB\n"); ++ goto err_3; ++ } ++ r = gpio_request(LCD_PANEL_QVGA, "lcd_panel_qvga"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_QVGA\n"); ++ goto err_4; ++ } ++ ++ gpio_direction_output(LCD_PANEL_LR, 0); ++ gpio_direction_output(LCD_PANEL_UD, 0); ++ gpio_direction_output(LCD_PANEL_INI, 0); ++ gpio_direction_output(LCD_PANEL_RESB, 0); ++ gpio_direction_output(LCD_PANEL_QVGA, 0); ++ ++#define TWL_LED_LEDEN 0x00 ++#define TWL_PWMA_PWMAON 0x00 ++#define TWL_PWMA_PWMAOFF 0x01 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); ++ ++ gpio_direction_output(LCD_PANEL_RESB, 1); ++ gpio_direction_output(LCD_PANEL_INI, 1); ++ gpio_direction_output(LCD_PANEL_QVGA, 0); ++ gpio_direction_output(LCD_PANEL_LR, 1); ++ gpio_direction_output(LCD_PANEL_UD, 1); ++ ++ return; ++ ++err_4: ++ gpio_free(LCD_PANEL_RESB); ++err_3: ++ gpio_free(LCD_PANEL_INI); ++err_2: ++ gpio_free(LCD_PANEL_UD); ++err_1: ++ gpio_free(LCD_PANEL_LR); ++ ++} ++ ++static int panel_enable_lcd(struct omap_display *display) ++{ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ if (system_rev > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); ++ } ++ gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); ++ lcd_enabled = 1; ++ return 0; ++} ++ ++static void panel_disable_lcd(struct omap_display *display) ++{ ++ if (system_rev > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 1); ++ lcd_enabled = 0; ++} ++ ++static struct omap_display_data evm_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd", ++ .panel_name = "panel-evm", ++ .u.dpi.data_lines = 16, ++ .panel_enable = panel_enable_lcd, ++ .panel_disable = panel_disable_lcd, ++}; ++ ++static int panel_enable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ return 0; ++} ++ ++static void panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_display_data evm_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = panel_enable_tv, ++ .panel_disable = panel_disable_tv, ++}; ++ ++ ++static int panel_enable_dvi(struct omap_display *display) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, ++ TWL4030_GPIODATA_IN3); ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, ++ TWL4030_GPIODATA_DIR3); ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void panel_disable_dvi(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, ++ TWL4030_GPIODATA_IN3); ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, ++ TWL4030_GPIODATA_DIR3); ++ dvi_enabled = 0; ++} ++ ++ ++static struct omap_display_data evm_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-dvi", ++ .u.dpi.data_lines = 24, ++ .panel_enable = panel_enable_dvi, ++ .panel_disable = panel_disable_dvi, ++}; ++ ++static struct omap_dss_platform_data evm_dss_data = { ++ .num_displays = 3, ++ .displays = { ++ &evm_display_data, ++ &evm_display_data_dvi, ++ &evm_display_data_tv, ++ } ++}; ++static struct platform_device evm_dss_device = { ++ .name = "omap-dss", ++ .id = -1, ++ .dev = { ++ .platform_data = &evm_dss_data, ++ }, + }; + + static void ads7846_dev_init(void) +@@ -227,11 +430,13 @@ static void __init omap3_evm_init_irq(void) + + static struct omap_board_config_kernel omap3_evm_config[] __initdata = { + { OMAP_TAG_UART, &omap3_evm_uart_config }, +- { OMAP_TAG_LCD, &omap3_evm_lcd_config }, ++ { OMAP_TAG_FBMEM, &evm_fbmem0_config }, ++ { OMAP_TAG_FBMEM, &evm_fbmem1_config }, ++ { OMAP_TAG_FBMEM, &evm_fbmem2_config }, + }; + + static struct platform_device *omap3_evm_devices[] __initdata = { +- &omap3_evm_lcd_device, ++ &evm_dss_device, + &omap3evm_smc911x_device, + }; + +@@ -250,8 +455,6 @@ static void __init omap3_evm_init(void) + omap3_evm_i2c_init(); + + platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); +- omap_board_config = omap3_evm_config; +- omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + + spi_register_board_info(omap3evm_spi_board_info, + ARRAY_SIZE(omap3evm_spi_board_info)); +@@ -262,10 +465,13 @@ static void __init omap3_evm_init(void) + usb_ehci_init(); + omap3evm_flash_init(); + ads7846_dev_init(); ++ evm_display_init(); + } + + static void __init omap3_evm_map_io(void) + { ++ omap_board_config = omap3_evm_config; ++ omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + omap2_set_globals_343x(); + omap2_map_common_io(); + } +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +index 95691ad..8211ffd 100644 +--- a/drivers/video/omap2/Kconfig ++++ b/drivers/video/omap2/Kconfig +@@ -51,4 +51,9 @@ config PANEL_SDP3430 + help + SDP3430 LCD + ++config PANEL_OMAP3EVM ++ tristate "OMAP3EVM Panel" ++ depends on OMAP2_DSS ++ help ++ OMAP3EVM LCD Panel + endmenu +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +index 73ab1c0..668e8c6 100644 +--- a/drivers/video/omap2/Makefile ++++ b/drivers/video/omap2/Makefile +@@ -3,3 +3,4 @@ omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o + + obj-$(CONFIG_PANEL_DVI) += panel-dvi.o + obj-$(CONFIG_PANEL_SDP3430) += panel-sdp3430.o ++obj-$(CONFIG_PANEL_OMAP3EVM) += panel-omap3evm.o +diff --git a/drivers/video/omap2/panel-omap3evm.c b/drivers/video/omap2/panel-omap3evm.c +new file mode 100644 +index 0000000..4a00b02 +--- /dev/null ++++ b/drivers/video/omap2/panel-omap3evm.c +@@ -0,0 +1,110 @@ ++/* ++ * LCD panel support for the TI OMAP3EVM board ++ * ++ * Copyright (C) 2008 Texas Instruments, Inc. ++ * Author: Vaibhav Hiremath <hvaibhav@ti.com> ++ * ++ * Derived from drivers/video/omap2/panel-sdp3430.c ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++ ++#include <mach/display.h> ++ ++static int omap3evm_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static void omap3evm_panel_cleanup(struct omap_display *display) ++{ ++} ++ ++static int omap3evm_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void omap3evm_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++} ++ ++static int omap3evm_panel_suspend(struct omap_display *display) ++{ ++ omap3evm_panel_disable(display); ++ return 0; ++} ++ ++static int omap3evm_panel_resume(struct omap_display *display) ++{ ++ return omap3evm_panel_enable(display); ++} ++ ++static struct omap_panel omap3evm_panel = { ++ .owner = THIS_MODULE, ++ .name = "panel-evm", ++ .init = omap3evm_panel_init, ++ .cleanup = omap3evm_panel_cleanup, ++ .enable = omap3evm_panel_enable, ++ .disable = omap3evm_panel_disable, ++ .suspend = omap3evm_panel_suspend, ++ .resume = omap3evm_panel_resume, ++ /*.set_mode = omap3evm_set_mode, */ ++ ++ .timings = { ++ .pixel_clock = 26000, ++ ++ .hsw = 4, ++ .hfp = 4, ++ .hbp = 40, ++ ++ .vsw = 2, ++ .vfp = 2, ++ .vbp = 7, ++ }, ++ ++ .acb = 0x28, ++ ++ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC, ++ ++ .x_res = 480, ++ .y_res = 640, ++ .bpp = 18, ++}; ++ ++ ++static int __init omap3evm_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&omap3evm_panel); ++ return 0; ++} ++ ++static void __exit omap3evm_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&omap3evm_panel); ++} ++ ++module_init(omap3evm_panel_drv_init); ++module_exit(omap3evm_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.5.6 + +-- +To unsubscribe from this list: send the line "unsubscribe linux-omap" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html + |