summaryrefslogtreecommitdiff
path: root/packages/linux/linux-omap2-git
diff options
context:
space:
mode:
Diffstat (limited to 'packages/linux/linux-omap2-git')
-rw-r--r--packages/linux/linux-omap2-git/beagleboard/00001-mcbsp-transform.patch1160
-rw-r--r--packages/linux/linux-omap2-git/beagleboard/00002-mcbsp-omap1.patch204
-rw-r--r--packages/linux/linux-omap2-git/beagleboard/00003-mcbsp-omap3-clock.patch123
-rw-r--r--packages/linux/linux-omap2-git/beagleboard/00004-omap2-mcbsp.patch144
-rw-r--r--packages/linux/linux-omap2-git/beagleboard/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch55
-rw-r--r--packages/linux/linux-omap2-git/beagleboard/defconfig7
6 files changed, 1691 insertions, 2 deletions
diff --git a/packages/linux/linux-omap2-git/beagleboard/00001-mcbsp-transform.patch b/packages/linux/linux-omap2-git/beagleboard/00001-mcbsp-transform.patch
new file mode 100644
index 0000000000..452370bf3e
--- /dev/null
+++ b/packages/linux/linux-omap2-git/beagleboard/00001-mcbsp-transform.patch
@@ -0,0 +1,1160 @@
+From: Eduardo Valentin <eduardo.valentin@indt.org.br>
+
+This patch transform mcbsp code into a very initial
+implementation of a platform driver.
+
+It also gets ride of ifdefs on mcbsp.c code.
+To do it, a platform data structure was defined.
+
+Platform devices are located in arch/arm/plat-omap/devices.c
+
+Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
+---
+ arch/arm/plat-omap/devices.c | 45 +++
+ arch/arm/plat-omap/mcbsp.c | 660 ++++++++++++++-----------------------
+ include/asm-arm/arch-omap/mcbsp.h | 73 ++++-
+ 3 files changed, 367 insertions(+), 411 deletions(-)
+
+diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
+index 099182b..b3e0147 100644
+--- a/arch/arm/plat-omap/devices.c
++++ b/arch/arm/plat-omap/devices.c
+@@ -27,6 +27,7 @@
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/menelaus.h>
+ #include <asm/arch/dsp_common.h>
++#include <asm/arch/mcbsp.h>
+
+ #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
+
+@@ -150,6 +151,49 @@ static inline void omap_init_kp(void) {}
+ #endif
+
+ /*-------------------------------------------------------------------------*/
++#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
++
++static struct platform_device omap_mcbsp_devices[OMAP_MAX_MCBSP_COUNT];
++static int mcbsps_configured;
++
++void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
++ int size)
++{
++ int i;
++
++ if (size > OMAP_MAX_MCBSP_COUNT) {
++ printk(KERN_WARNING "Registered too many McBSPs platform_data."
++ " Using maximum (%d) available.\n",
++ OMAP_MAX_MCBSP_COUNT);
++ size = OMAP_MAX_MCBSP_COUNT;
++ }
++
++ for (i = 0; i < size; i++) {
++ struct platform_device *new_mcbsp = &omap_mcbsp_devices[i];
++ new_mcbsp->name = "omap-mcbsp";
++ new_mcbsp->id = i + 1;
++ new_mcbsp->dev.platform_data = &config[i];
++ }
++ mcbsps_configured = size;
++}
++
++static void __init omap_init_mcbsp(void)
++{
++ int i;
++
++ for (i = 0; i < mcbsps_configured; i++)
++ platform_device_register(&omap_mcbsp_devices[i]);
++}
++#else
++void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
++ int size)
++{ }
++
++static inline void __init omap_init_mcbsp(void)
++{ }
++#endif
++
++/*-------------------------------------------------------------------------*/
+
+ #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) \
+ || defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+@@ -511,6 +555,7 @@ static int __init omap_init_devices(void)
+ */
+ omap_init_dsp();
+ omap_init_kp();
++ omap_init_mcbsp();
+ omap_init_mmc();
+ omap_init_uwire();
+ omap_init_wdt();
+diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
+index 053de31..5536223 100644
+--- a/arch/arm/plat-omap/mcbsp.c
++++ b/arch/arm/plat-omap/mcbsp.c
+@@ -15,6 +15,7 @@
+ #include <linux/module.h>
+ #include <linux/init.h>
+ #include <linux/device.h>
++#include <linux/platform_device.h>
+ #include <linux/wait.h>
+ #include <linux/completion.h>
+ #include <linux/interrupt.h>
+@@ -25,83 +26,53 @@
+ #include <linux/irq.h>
+
+ #include <asm/arch/dma.h>
+-#include <asm/arch/mux.h>
+-#include <asm/arch/irqs.h>
+-#include <asm/arch/dsp_common.h>
+ #include <asm/arch/mcbsp.h>
+
+-#ifdef CONFIG_MCBSP_DEBUG
+-#define DBG(x...) printk(x)
+-#else
+-#define DBG(x...) do { } while (0)
+-#endif
+-
+-struct omap_mcbsp {
+- u32 io_base;
+- u8 id;
+- u8 free;
+- omap_mcbsp_word_length rx_word_length;
+- omap_mcbsp_word_length tx_word_length;
+-
+- omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+- /* IRQ based TX/RX */
+- int rx_irq;
+- int tx_irq;
+-
+- /* DMA stuff */
+- u8 dma_rx_sync;
+- short dma_rx_lch;
+- u8 dma_tx_sync;
+- short dma_tx_lch;
+-
+- /* Completion queues */
+- struct completion tx_irq_completion;
+- struct completion rx_irq_completion;
+- struct completion tx_dma_completion;
+- struct completion rx_dma_completion;
+-
+- /* Protect the field .free, while checking if the mcbsp is in use */
+- spinlock_t lock;
+-};
+-
+ static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
+-#ifdef CONFIG_ARCH_OMAP1
+-static struct clk *mcbsp_dsp_ck;
+-static struct clk *mcbsp_api_ck;
+-static struct clk *mcbsp_dspxor_ck;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP2
+-static struct clk *mcbsp1_ick;
+-static struct clk *mcbsp1_fck;
+-static struct clk *mcbsp2_ick;
+-static struct clk *mcbsp2_fck;
+-#endif
++
++#define omap_mcbsp_check_valid_id(id) (mcbsp[id].pdata && \
++ mcbsp[id].pdata->ops && \
++ mcbsp[id].pdata->ops->check && \
++ (mcbsp[id].pdata->ops->check(id) == 0))
+
+ static void omap_mcbsp_dump_reg(u8 id)
+ {
+- DBG("**** MCBSP%d regs ****\n", mcbsp[id].id);
+- DBG("DRR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
+- DBG("DRR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
+- DBG("DXR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
+- DBG("DXR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
+- DBG("SPCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
+- DBG("SPCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
+- DBG("RCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
+- DBG("RCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
+- DBG("XCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
+- DBG("XCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
+- DBG("SRGR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
+- DBG("SRGR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
+- DBG("PCR0: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
+- DBG("***********************\n");
++ dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id);
++ dev_dbg(mcbsp[id].dev, "DRR2: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
++ dev_dbg(mcbsp[id].dev, "DRR1: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
++ dev_dbg(mcbsp[id].dev, "DXR2: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
++ dev_dbg(mcbsp[id].dev, "DXR1: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
++ dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
++ dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
++ dev_dbg(mcbsp[id].dev, "RCR2: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
++ dev_dbg(mcbsp[id].dev, "RCR1: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
++ dev_dbg(mcbsp[id].dev, "XCR2: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
++ dev_dbg(mcbsp[id].dev, "XCR1: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
++ dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
++ dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
++ dev_dbg(mcbsp[id].dev, "PCR0: 0x%04x\n",
++ OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
++ dev_dbg(mcbsp[id].dev, "***********************\n");
+ }
+
+ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
+ {
+ struct omap_mcbsp *mcbsp_tx = dev_id;
+
+- DBG("TX IRQ callback : 0x%x\n",
+- OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
++ dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
++ OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+
+ complete(&mcbsp_tx->tx_irq_completion);
+
+@@ -112,8 +83,8 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
+ {
+ struct omap_mcbsp *mcbsp_rx = dev_id;
+
+- DBG("RX IRQ callback : 0x%x\n",
+- OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
++ dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
++ OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+
+ complete(&mcbsp_rx->rx_irq_completion);
+
+@@ -124,8 +95,8 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
+ {
+ struct omap_mcbsp *mcbsp_dma_tx = data;
+
+- DBG("TX DMA callback : 0x%x\n",
+- OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
++ dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n",
++ OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+
+ /* We can free the channels */
+ omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
+@@ -138,8 +109,8 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
+ {
+ struct omap_mcbsp *mcbsp_dma_rx = data;
+
+- DBG("RX DMA callback : 0x%x\n",
+- OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
++ dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n",
++ OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+
+ /* We can free the channels */
+ omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
+@@ -156,9 +127,16 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
+ */
+ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
+ {
+- u32 io_base = mcbsp[id].io_base;
++ u32 io_base;
++
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return;
++ }
+
+- DBG("OMAP-McBSP: McBSP%d io_base: 0x%8x\n", id + 1, io_base);
++ io_base = mcbsp[id].io_base;
++ dev_dbg(mcbsp[id].dev, "Configuring McBSP%d io_base: 0x%8x\n",
++ mcbsp[id].id, io_base);
+
+ /* We write the given config */
+ OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
+@@ -175,97 +153,22 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
+ }
+ EXPORT_SYMBOL(omap_mcbsp_config);
+
+-static int omap_mcbsp_check(unsigned int id)
+-{
+- if (cpu_is_omap730()) {
+- if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+- printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
+- id + 1);
+- return -1;
+- }
+- return 0;
+- }
+-
+- if (cpu_is_omap15xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) {
+- if (id > OMAP_MAX_MCBSP_COUNT) {
+- printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
+- id + 1);
+- return -1;
+- }
+- return 0;
+- }
+-
+- return -1;
+-}
+-
+-#ifdef CONFIG_ARCH_OMAP1
+-static void omap_mcbsp_dsp_request(void)
+-{
+- if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+- int ret;
+-
+- ret = omap_dsp_request_mem();
+- if (ret < 0) {
+- printk(KERN_ERR "Could not get dsp memory: %i\n", ret);
+- return;
+- }
+-
+- clk_enable(mcbsp_dsp_ck);
+- clk_enable(mcbsp_api_ck);
+-
+- /* enable 12MHz clock to mcbsp 1 & 3 */
+- clk_enable(mcbsp_dspxor_ck);
+-
+- /*
+- * DSP external peripheral reset
+- * FIXME: This should be moved to dsp code
+- */
+- __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
+- DSP_RSTCT2);
+- }
+-}
+-
+-static void omap_mcbsp_dsp_free(void)
+-{
+- if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+- omap_dsp_release_mem();
+- clk_disable(mcbsp_dspxor_ck);
+- clk_disable(mcbsp_dsp_ck);
+- clk_disable(mcbsp_api_ck);
+- }
+-}
+-#endif
+-
+-#ifdef CONFIG_ARCH_OMAP2
+-static void omap2_mcbsp2_mux_setup(void)
+-{
+- if (cpu_is_omap2420()) {
+- omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
+- omap_cfg_reg(R14_24XX_MCBSP2_FSX);
+- omap_cfg_reg(W15_24XX_MCBSP2_DR);
+- omap_cfg_reg(V15_24XX_MCBSP2_DX);
+- omap_cfg_reg(V14_24XX_GPIO117);
+- }
+- /*
+- * Need to add MUX settings for OMAP 2430 SDP
+- */
+-}
+-#endif
+-
+ /*
+ * We can choose between IRQ based or polled IO.
+ * This needs to be called before omap_mcbsp_request().
+ */
+ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
+ {
+- if (omap_mcbsp_check(id) < 0)
+- return -EINVAL;
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
++ }
+
+ spin_lock(&mcbsp[id].lock);
+
+ if (!mcbsp[id].free) {
+- printk(KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n",
+- id + 1);
++ dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
++ mcbsp[id].id);
+ spin_unlock(&mcbsp[id].lock);
+ return -EINVAL;
+ }
+@@ -282,34 +185,20 @@ int omap_mcbsp_request(unsigned int id)
+ {
+ int err;
+
+- if (omap_mcbsp_check(id) < 0)
+- return -EINVAL;
+-
+-#ifdef CONFIG_ARCH_OMAP1
+- /*
+- * On 1510, 1610 and 1710, McBSP1 and McBSP3
+- * are DSP public peripherals.
+- */
+- if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+- omap_mcbsp_dsp_request();
+-#endif
+-
+-#ifdef CONFIG_ARCH_OMAP2
+- if (cpu_is_omap24xx()) {
+- if (id == OMAP_MCBSP1) {
+- clk_enable(mcbsp1_ick);
+- clk_enable(mcbsp1_fck);
+- } else {
+- clk_enable(mcbsp2_ick);
+- clk_enable(mcbsp2_fck);
+- }
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
+ }
+-#endif
++
++ if (mcbsp[id].pdata->ops->request)
++ mcbsp[id].pdata->ops->request(id);
++
++ mcbsp_clk_enable(&mcbsp[id]);
+
+ spin_lock(&mcbsp[id].lock);
+ if (!mcbsp[id].free) {
+- printk(KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n",
+- id + 1);
++ dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
++ mcbsp[id].id);
+ spin_unlock(&mcbsp[id].lock);
+ return -1;
+ }
+@@ -322,9 +211,9 @@ int omap_mcbsp_request(unsigned int id)
+ err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler,
+ 0, "McBSP", (void *) (&mcbsp[id]));
+ if (err != 0) {
+- printk(KERN_ERR "OMAP-McBSP: Unable to "
+- "request TX IRQ %d for McBSP%d\n",
+- mcbsp[id].tx_irq, mcbsp[id].id);
++ dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d "
++ "for McBSP%d\n", mcbsp[id].tx_irq,
++ mcbsp[id].id);
+ return err;
+ }
+
+@@ -333,9 +222,9 @@ int omap_mcbsp_request(unsigned int id)
+ err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler,
+ 0, "McBSP", (void *) (&mcbsp[id]));
+ if (err != 0) {
+- printk(KERN_ERR "OMAP-McBSP: Unable to "
+- "request RX IRQ %d for McBSP%d\n",
+- mcbsp[id].rx_irq, mcbsp[id].id);
++ dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d "
++ "for McBSP%d\n", mcbsp[id].rx_irq,
++ mcbsp[id].id);
+ free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+ return err;
+ }
+@@ -349,32 +238,20 @@ EXPORT_SYMBOL(omap_mcbsp_request);
+
+ void omap_mcbsp_free(unsigned int id)
+ {
+- if (omap_mcbsp_check(id) < 0)
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
+-
+-#ifdef CONFIG_ARCH_OMAP1
+- if (cpu_class_is_omap1()) {
+- if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+- omap_mcbsp_dsp_free();
+ }
+-#endif
+-
+-#ifdef CONFIG_ARCH_OMAP2
+- if (cpu_is_omap24xx()) {
+- if (id == OMAP_MCBSP1) {
+- clk_disable(mcbsp1_ick);
+- clk_disable(mcbsp1_fck);
+- } else {
+- clk_disable(mcbsp2_ick);
+- clk_disable(mcbsp2_fck);
+- }
+- }
+-#endif
++
++ if (mcbsp[id].pdata->ops->free)
++ mcbsp[id].pdata->ops->free(id);
++
++ mcbsp_clk_disable(&mcbsp[id]);
+
+ spin_lock(&mcbsp[id].lock);
+ if (mcbsp[id].free) {
+- printk(KERN_ERR "OMAP-McBSP: McBSP%d was not reserved\n",
+- id + 1);
++ dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n",
++ mcbsp[id].id);
+ spin_unlock(&mcbsp[id].lock);
+ return;
+ }
+@@ -400,8 +277,10 @@ void omap_mcbsp_start(unsigned int id)
+ u32 io_base;
+ u16 w;
+
+- if (omap_mcbsp_check(id) < 0)
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
++ }
+
+ io_base = mcbsp[id].io_base;
+
+@@ -435,8 +314,10 @@ void omap_mcbsp_stop(unsigned int id)
+ u32 io_base;
+ u16 w;
+
+- if (omap_mcbsp_check(id) < 0)
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
++ }
+
+ io_base = mcbsp[id].io_base;
+
+@@ -457,7 +338,14 @@ EXPORT_SYMBOL(omap_mcbsp_stop);
+ /* polled mcbsp i/o operations */
+ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
+ {
+- u32 base = mcbsp[id].io_base;
++ u32 base;
++
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
++ }
++
++ base = mcbsp[id].io_base;
+ writew(buf, base + OMAP_MCBSP_REG_DXR1);
+ /* if frame sync error - clear the error */
+ if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
+@@ -479,8 +367,8 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
+ (XRST),
+ base + OMAP_MCBSP_REG_SPCR2);
+ udelay(10);
+- printk(KERN_ERR
+- " Could not write to McBSP Register\n");
++ dev_err(mcbsp[id].dev, "Could not write to"
++ " McBSP%d Register\n", mcbsp[id].id);
+ return -2;
+ }
+ }
+@@ -492,7 +380,14 @@ EXPORT_SYMBOL(omap_mcbsp_pollwrite);
+
+ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
+ {
+- u32 base = mcbsp[id].io_base;
++ u32 base;
++
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
++ }
++
++ base = mcbsp[id].io_base;
+ /* if frame sync error - clear the error */
+ if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
+ /* clear error */
+@@ -513,8 +408,8 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
+ (RRST),
+ base + OMAP_MCBSP_REG_SPCR1);
+ udelay(10);
+- printk(KERN_ERR
+- " Could not read from McBSP Register\n");
++ dev_err(mcbsp[id].dev, "Could not read from"
++ " McBSP%d Register\n", mcbsp[id].id);
+ return -2;
+ }
+ }
+@@ -531,12 +426,15 @@ EXPORT_SYMBOL(omap_mcbsp_pollread);
+ void omap_mcbsp_xmit_word(unsigned int id, u32 word)
+ {
+ u32 io_base;
+- omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length;
++ omap_mcbsp_word_length word_length;
+
+- if (omap_mcbsp_check(id) < 0)
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
++ }
+
+ io_base = mcbsp[id].io_base;
++ word_length = mcbsp[id].tx_word_length;
+
+ wait_for_completion(&(mcbsp[id].tx_irq_completion));
+
+@@ -550,11 +448,14 @@ u32 omap_mcbsp_recv_word(unsigned int id)
+ {
+ u32 io_base;
+ u16 word_lsb, word_msb = 0;
+- omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length;
++ omap_mcbsp_word_length word_length;
+
+- if (omap_mcbsp_check(id) < 0)
+- return -EINVAL;
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
++ }
+
++ word_length = mcbsp[id].rx_word_length;
+ io_base = mcbsp[id].io_base;
+
+ wait_for_completion(&(mcbsp[id].rx_irq_completion));
+@@ -569,11 +470,20 @@ EXPORT_SYMBOL(omap_mcbsp_recv_word);
+
+ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
+ {
+- u32 io_base = mcbsp[id].io_base;
+- omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length;
+- omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length;
++ u32 io_base;
++ omap_mcbsp_word_length tx_word_length;
++ omap_mcbsp_word_length rx_word_length;
+ u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
+
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
++ }
++
++ io_base = mcbsp[id].io_base;
++ tx_word_length = mcbsp[id].tx_word_length;
++ rx_word_length = mcbsp[id].rx_word_length;
++
+ if (tx_word_length != rx_word_length)
+ return -EINVAL;
+
+@@ -587,7 +497,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
+ udelay(10);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
+ udelay(10);
+- printk(KERN_ERR "McBSP transmitter not ready\n");
++ dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
++ "ready\n", mcbsp[id].id);
+ return -EAGAIN;
+ }
+ }
+@@ -607,7 +518,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
+ udelay(10);
+ OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
+ udelay(10);
+- printk(KERN_ERR "McBSP receiver not ready\n");
++ dev_err(mcbsp[id].dev, "McBSP%d receiver not "
++ "ready\n", mcbsp[id].id);
+ return -EAGAIN;
+ }
+ }
+@@ -623,11 +535,20 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
+
+ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
+ {
+- u32 io_base = mcbsp[id].io_base, clock_word = 0;
+- omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length;
+- omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length;
++ u32 io_base, clock_word = 0;
++ omap_mcbsp_word_length tx_word_length;
++ omap_mcbsp_word_length rx_word_length;
+ u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
+
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
++ }
++
++ io_base = mcbsp[id].io_base;
++ tx_word_length = mcbsp[id].tx_word_length;
++ rx_word_length = mcbsp[id].rx_word_length;
++
+ if (tx_word_length != rx_word_length)
+ return -EINVAL;
+
+@@ -641,7 +562,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
+ udelay(10);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
+ udelay(10);
+- printk(KERN_ERR "McBSP transmitter not ready\n");
++ dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
++ "ready\n", mcbsp[id].id);
+ return -EAGAIN;
+ }
+ }
+@@ -661,7 +583,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
+ udelay(10);
+ OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
+ udelay(10);
+- printk(KERN_ERR "McBSP receiver not ready\n");
++ dev_err(mcbsp[id].dev, "McBSP%d receiver not "
++ "ready\n", mcbsp[id].id);
+ return -EAGAIN;
+ }
+ }
+@@ -692,20 +615,24 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
+ int dest_port = 0;
+ int sync_dev = 0;
+
+- if (omap_mcbsp_check(id) < 0)
+- return -EINVAL;
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
++ }
+
+ if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX",
+ omap_mcbsp_tx_dma_callback,
+ &mcbsp[id],
+ &dma_tx_ch)) {
+- printk(KERN_ERR "OMAP-McBSP: Unable to request DMA channel for"
+- " McBSP%d TX. Trying IRQ based TX\n", id + 1);
++ dev_err(mcbsp[id].dev, " Unable to request DMA channel for "
++ "McBSP%d TX. Trying IRQ based TX\n",
++ mcbsp[id].id);
+ return -EAGAIN;
+ }
+ mcbsp[id].dma_tx_lch = dma_tx_ch;
+
+- DBG("TX DMA on channel %d\n", dma_tx_ch);
++ dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id,
++ dma_tx_ch);
+
+ init_completion(&(mcbsp[id].tx_dma_completion));
+
+@@ -713,7 +640,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
+ src_port = OMAP_DMA_PORT_TIPB;
+ dest_port = OMAP_DMA_PORT_EMIFF;
+ }
+- if (cpu_is_omap24xx())
++ if (cpu_class_is_omap2())
+ sync_dev = mcbsp[id].dma_tx_sync;
+
+ omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
+@@ -749,20 +676,24 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
+ int dest_port = 0;
+ int sync_dev = 0;
+
+- if (omap_mcbsp_check(id) < 0)
+- return -EINVAL;
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
++ return -ENODEV;
++ }
+
+ if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX",
+ omap_mcbsp_rx_dma_callback,
+ &mcbsp[id],
+ &dma_rx_ch)) {
+- printk(KERN_ERR "Unable to request DMA channel for McBSP%d RX."
+- " Trying IRQ based RX\n", id + 1);
++ dev_err(mcbsp[id].dev, "Unable to request DMA channel for "
++ "McBSP%d RX. Trying IRQ based RX\n",
++ mcbsp[id].id);
+ return -EAGAIN;
+ }
+ mcbsp[id].dma_rx_lch = dma_rx_ch;
+
+- DBG("RX DMA on channel %d\n", dma_rx_ch);
++ dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id,
++ dma_rx_ch);
+
+ init_completion(&(mcbsp[id].rx_dma_completion));
+
+@@ -770,7 +701,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
+ src_port = OMAP_DMA_PORT_TIPB;
+ dest_port = OMAP_DMA_PORT_EMIFF;
+ }
+- if (cpu_is_omap24xx())
++ if (cpu_class_is_omap2())
+ sync_dev = mcbsp[id].dma_rx_sync;
+
+ omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
+@@ -809,8 +740,10 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
+ {
+ struct omap_mcbsp_reg_cfg mcbsp_cfg;
+
+- if (omap_mcbsp_check(id) < 0)
++ if (!omap_mcbsp_check_valid_id(id)) {
++ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
++ }
+
+ memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
+
+@@ -871,182 +804,91 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
+ * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
+ * 730 has only 2 McBSP, and both of them are MPU peripherals.
+ */
+-struct omap_mcbsp_info {
+- u32 virt_base;
+- u8 dma_rx_sync, dma_tx_sync;
+- u16 rx_irq, tx_irq;
+-};
++static int __init omap_mcbsp_probe(struct platform_device *pdev)
++{
++ struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
++ int id = pdev->id - 1;
++ int ret = 0;
++ int i;
+
+-#ifdef CONFIG_ARCH_OMAP730
+-static const struct omap_mcbsp_info mcbsp_730[] = {
+- [0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
+- .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+- .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+- .rx_irq = INT_730_McBSP1RX,
+- .tx_irq = INT_730_McBSP1TX },
+- [1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
+- .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+- .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+- .rx_irq = INT_730_McBSP2RX,
+- .tx_irq = INT_730_McBSP2TX },
+-};
+-#endif
+-
+-#ifdef CONFIG_ARCH_OMAP15XX
+-static const struct omap_mcbsp_info mcbsp_1510[] = {
+- [0] = { .virt_base = OMAP1510_MCBSP1_BASE,
+- .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+- .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+- .rx_irq = INT_McBSP1RX,
+- .tx_irq = INT_McBSP1TX },
+- [1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
+- .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
+- .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
+- .rx_irq = INT_1510_SPI_RX,
+- .tx_irq = INT_1510_SPI_TX },
+- [2] = { .virt_base = OMAP1510_MCBSP3_BASE,
+- .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+- .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+- .rx_irq = INT_McBSP3RX,
+- .tx_irq = INT_McBSP3TX },
+-};
+-#endif
+-
+-#if defined(CONFIG_ARCH_OMAP16XX)
+-static const struct omap_mcbsp_info mcbsp_1610[] = {
+- [0] = { .virt_base = OMAP1610_MCBSP1_BASE,
+- .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+- .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+- .rx_irq = INT_McBSP1RX,
+- .tx_irq = INT_McBSP1TX },
+- [1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
+- .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
+- .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
+- .rx_irq = INT_1610_McBSP2_RX,
+- .tx_irq = INT_1610_McBSP2_TX },
+- [2] = { .virt_base = OMAP1610_MCBSP3_BASE,
+- .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+- .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+- .rx_irq = INT_McBSP3RX,
+- .tx_irq = INT_McBSP3TX },
+-};
+-#endif
+-
+-#if defined(CONFIG_ARCH_OMAP24XX)
+-static const struct omap_mcbsp_info mcbsp_24xx[] = {
+- [0] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
+- .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
+- .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
+- .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
+- .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
+- },
+- [1] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
+- .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
+- .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
+- .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
+- .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
+- },
+-};
+-#endif
++ if (!pdata) {
++ dev_err(&pdev->dev, "McBSP device initialized without"
++ "platform data\n");
++ ret = -EINVAL;
++ goto exit;
++ }
+
+-static int __init omap_mcbsp_init(void)
++ dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id);
++
++ if (id >= OMAP_MAX_MCBSP_COUNT) {
++ dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id);
++ ret = -EINVAL;
++ goto exit;
++ }
++
++ spin_lock_init(&mcbsp[id].lock);
++ mcbsp[id].id = id + 1;
++ mcbsp[id].free = 1;
++ mcbsp[id].dma_tx_lch = -1;
++ mcbsp[id].dma_rx_lch = -1;
++
++ mcbsp[id].io_base = pdata->virt_base;
++ /* Default I/O is IRQ based */
++ mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
++ mcbsp[id].tx_irq = pdata->tx_irq;
++ mcbsp[id].rx_irq = pdata->rx_irq;
++ mcbsp[id].dma_rx_sync = pdata->dma_rx_sync;
++ mcbsp[id].dma_tx_sync = pdata->dma_tx_sync;
++
++ mcbsp[id].nr_clocks = ARRAY_SIZE(pdata->clocks);
++ for (i = 0; i < ARRAY_SIZE(pdata->clocks); i++)
++ mcbsp[id].clocks[i] = clk_get(&pdev->dev, pdata->clocks[i]);
++
++ mcbsp[id].pdata = pdata;
++ mcbsp[id].dev = &pdev->dev;
++ platform_set_drvdata(pdev, &mcbsp[id]);
++
++exit:
++ return ret;
++}
++
++static int omap_mcbsp_remove(struct platform_device *pdev)
+ {
+- int mcbsp_count = 0, i;
+- static const struct omap_mcbsp_info *mcbsp_info;
++ struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
+
+- printk(KERN_INFO "Initializing OMAP McBSP system\n");
++ platform_set_drvdata(pdev, NULL);
++ if (mcbsp) {
++ int i;
+
+-#ifdef CONFIG_ARCH_OMAP1
+- mcbsp_dsp_ck = clk_get(0, "dsp_ck");
+- if (IS_ERR(mcbsp_dsp_ck)) {
+- printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
+- return PTR_ERR(mcbsp_dsp_ck);
+- }
+- mcbsp_api_ck = clk_get(0, "api_ck");
+- if (IS_ERR(mcbsp_api_ck)) {
+- printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
+- return PTR_ERR(mcbsp_api_ck);
+- }
+- mcbsp_dspxor_ck = clk_get(0, "dspxor_ck");
+- if (IS_ERR(mcbsp_dspxor_ck)) {
+- printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n");
+- return PTR_ERR(mcbsp_dspxor_ck);
+- }
+-#endif
+-#ifdef CONFIG_ARCH_OMAP2
+- mcbsp1_ick = clk_get(0, "mcbsp1_ick");
+- if (IS_ERR(mcbsp1_ick)) {
+- printk(KERN_ERR "mcbsp: could not acquire "
+- "mcbsp1_ick handle.\n");
+- return PTR_ERR(mcbsp1_ick);
+- }
+- mcbsp1_fck = clk_get(0, "mcbsp1_fck");
+- if (IS_ERR(mcbsp1_fck)) {
+- printk(KERN_ERR "mcbsp: could not acquire "
+- "mcbsp1_fck handle.\n");
+- return PTR_ERR(mcbsp1_fck);
+- }
+- mcbsp2_ick = clk_get(0, "mcbsp2_ick");
+- if (IS_ERR(mcbsp2_ick)) {
+- printk(KERN_ERR "mcbsp: could not acquire "
+- "mcbsp2_ick handle.\n");
+- return PTR_ERR(mcbsp2_ick);
+- }
+- mcbsp2_fck = clk_get(0, "mcbsp2_fck");
+- if (IS_ERR(mcbsp2_fck)) {
+- printk(KERN_ERR "mcbsp: could not acquire "
+- "mcbsp2_fck handle.\n");
+- return PTR_ERR(mcbsp2_fck);
+- }
+-#endif
++ if (mcbsp->pdata && mcbsp->pdata->ops &&
++ mcbsp->pdata->ops->free)
++ mcbsp->pdata->ops->free(mcbsp->id);
+
+-#ifdef CONFIG_ARCH_OMAP730
+- if (cpu_is_omap730()) {
+- mcbsp_info = mcbsp_730;
+- mcbsp_count = ARRAY_SIZE(mcbsp_730);
+- }
+-#endif
+-#ifdef CONFIG_ARCH_OMAP15XX
+- if (cpu_is_omap15xx()) {
+- mcbsp_info = mcbsp_1510;
+- mcbsp_count = ARRAY_SIZE(mcbsp_1510);
+- }
+-#endif
+-#if defined(CONFIG_ARCH_OMAP16XX)
+- if (cpu_is_omap16xx()) {
+- mcbsp_info = mcbsp_1610;
+- mcbsp_count = ARRAY_SIZE(mcbsp_1610);
+- }
+-#endif
+-#if defined(CONFIG_ARCH_OMAP24XX)
+- if (cpu_is_omap24xx()) {
+- mcbsp_info = mcbsp_24xx;
+- mcbsp_count = ARRAY_SIZE(mcbsp_24xx);
+- omap2_mcbsp2_mux_setup();
+- }
+-#endif
+- for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
+- if (i >= mcbsp_count) {
+- mcbsp[i].io_base = 0;
+- mcbsp[i].free = 0;
+- continue;
+- }
+- mcbsp[i].id = i + 1;
+- mcbsp[i].free = 1;
+- mcbsp[i].dma_tx_lch = -1;
+- mcbsp[i].dma_rx_lch = -1;
+-
+- mcbsp[i].io_base = mcbsp_info[i].virt_base;
+- /* Default I/O is IRQ based */
+- mcbsp[i].io_type = OMAP_MCBSP_IRQ_IO;
+- mcbsp[i].tx_irq = mcbsp_info[i].tx_irq;
+- mcbsp[i].rx_irq = mcbsp_info[i].rx_irq;
+- mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync;
+- mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync;
+- spin_lock_init(&mcbsp[i].lock);
++ mcbsp_clk_disable(mcbsp);
++ mcbsp_clk_put(mcbsp);
++
++ for (i = 0; i < mcbsp->nr_clocks; i++)
++ mcbsp->clocks[i] = NULL;
++
++ mcbsp->free = 0;
++ mcbsp->dev = NULL;
+ }
+
+ return 0;
+ }
+
+-arch_initcall(omap_mcbsp_init);
++static struct platform_driver omap_mcbsp_driver = {
++ .probe = omap_mcbsp_probe,
++ .remove = omap_mcbsp_remove,
++ .driver = {
++ .name = "omap-mcbsp",
++ },
++};
++
++int __init omap_mcbsp_init(void)
++{
++ /* Register the McBSP driver */
++ return platform_driver_register(&omap_mcbsp_driver);
++}
++
++
+diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
+index b53c3b2..aa47421 100644
+--- a/include/asm-arm/arch-omap/mcbsp.h
++++ b/include/asm-arm/arch-omap/mcbsp.h
+@@ -24,7 +24,11 @@
+ #ifndef __ASM_ARCH_OMAP_MCBSP_H
+ #define __ASM_ARCH_OMAP_MCBSP_H
+
++#include <linux/completion.h>
++#include <linux/spinlock.h>
++
+ #include <asm/hardware.h>
++#include <asm/arch/clock.h>
+
+ #define OMAP730_MCBSP1_BASE 0xfffb1000
+ #define OMAP730_MCBSP2_BASE 0xfffb1800
+@@ -40,6 +44,9 @@
+ #define OMAP24XX_MCBSP1_BASE 0x48074000
+ #define OMAP24XX_MCBSP2_BASE 0x48076000
+
++#define OMAP34XX_MCBSP1_BASE 0x48074000
++#define OMAP34XX_MCBSP2_BASE 0x49022000
++
+ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+
+ #define OMAP_MCBSP_REG_DRR2 0x00
+@@ -74,7 +81,8 @@
+ #define OMAP_MCBSP_REG_XCERG 0x3A
+ #define OMAP_MCBSP_REG_XCERH 0x3C
+
+-#define OMAP_MAX_MCBSP_COUNT 3
++#define OMAP_MAX_MCBSP_COUNT 3
++#define MAX_MCBSP_CLOCKS 3
+
+ #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
+ #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
+@@ -117,7 +125,8 @@
+ #define OMAP_MCBSP_REG_XCERG 0x74
+ #define OMAP_MCBSP_REG_XCERH 0x78
+
+-#define OMAP_MAX_MCBSP_COUNT 2
++#define OMAP_MAX_MCBSP_COUNT 2
++#define MAX_MCBSP_CLOCKS 2
+
+ #define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
+ #define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
+@@ -298,6 +307,66 @@ struct omap_mcbsp_spi_cfg {
+ omap_mcbsp_word_length word_length;
+ };
+
++/* Platform specific configuration */
++struct omap_mcbsp_ops {
++ void (*request)(unsigned int);
++ void (*free)(unsigned int);
++ int (*check)(unsigned int);
++};
++
++struct omap_mcbsp_platform_data {
++ u32 virt_base;
++ u8 dma_rx_sync, dma_tx_sync;
++ u16 rx_irq, tx_irq;
++ struct omap_mcbsp_ops *ops;
++ char const *clocks[MAX_MCBSP_CLOCKS];
++};
++
++struct omap_mcbsp {
++ struct device *dev;
++ u32 io_base;
++ u8 id;
++ u8 free;
++ omap_mcbsp_word_length rx_word_length;
++ omap_mcbsp_word_length tx_word_length;
++
++ omap_mcbsp_io_type_t io_type; /* IRQ or poll */
++ /* IRQ based TX/RX */
++ int rx_irq;
++ int tx_irq;
++
++ /* DMA stuff */
++ u8 dma_rx_sync;
++ short dma_rx_lch;
++ u8 dma_tx_sync;
++ short dma_tx_lch;
++
++ /* Completion queues */
++ struct completion tx_irq_completion;
++ struct completion rx_irq_completion;
++ struct completion tx_dma_completion;
++ struct completion rx_dma_completion;
++
++ /* Protect the field .free, while checking if the mcbsp is in use */
++ spinlock_t lock;
++ struct omap_mcbsp_platform_data *pdata;
++ int nr_clocks;
++ struct clk *clocks[MAX_MCBSP_CLOCKS];
++};
++
++#define __mcbsp_clk_op(mcbsp, op) \
++ do { \
++ int i; \
++ for (i = 0; i < mcbsp->nr_clocks; i++) \
++ clk_##op(mcbsp->clocks[i]); \
++ } while (0)
++#define mcbsp_clk_enable(mcbsp) __mcbsp_clk_op((mcbsp), enable)
++#define mcbsp_clk_disable(mcbsp) __mcbsp_clk_op((mcbsp), disable)
++#define mcbsp_clk_put(mcbsp) __mcbsp_clk_op((mcbsp), put)
++
++int omap_mcbsp_init(void);
++void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
++ int size);
+ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+ int omap_mcbsp_request(unsigned int id);
+ void omap_mcbsp_free(unsigned int id);
+--
+1.5.5.1.67.gbdb8.dirty
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap2-git/beagleboard/00002-mcbsp-omap1.patch b/packages/linux/linux-omap2-git/beagleboard/00002-mcbsp-omap1.patch
new file mode 100644
index 0000000000..76246a9fae
--- /dev/null
+++ b/packages/linux/linux-omap2-git/beagleboard/00002-mcbsp-omap1.patch
@@ -0,0 +1,204 @@
+From: Eduardo Valentin <eduardo.valentin@indt.org.br>
+
+This patch adds support for mach-omap1 based on current
+mcbsp platform driver.
+
+Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
+---
+ arch/arm/mach-omap1/Makefile | 2 +
+ arch/arm/mach-omap1/mcbsp.c | 165 ++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 167 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-omap1/mcbsp.c
+
+diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
+index 6ebf23b..09246a7 100644
+--- a/arch/arm/mach-omap1/Makefile
++++ b/arch/arm/mach-omap1/Makefile
+@@ -5,6 +5,8 @@
+ # Common support
+ obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
+
++obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
++
+ obj-$(CONFIG_OMAP_MPU_TIMER) += time.o
+ obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
+
+diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
+new file mode 100644
+index 0000000..f30624a
+--- /dev/null
++++ b/arch/arm/mach-omap1/mcbsp.c
+@@ -0,0 +1,165 @@
++/*
++ * linux/arch/arm/mach-omap1/mcbsp.c
++ *
++ * Copyright (C) 2008 Instituto Nokia de Tecnologia
++ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Multichannel mode not supported.
++ */
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++
++#include <asm/arch/dma.h>
++#include <asm/arch/mux.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/mcbsp.h>
++#include <asm/arch/dsp_common.h>
++
++#define DPS_RSTCT2_PER_EN (1 << 0)
++#define DSP_RSTCT2_WD_PER_EN (1 << 1)
++
++static int omap1_mcbsp_check(unsigned int id)
++{
++ /* REVISIT: Check correctly for number of registered McBSPs */
++ if (cpu_is_omap730()) {
++ if (id > OMAP_MAX_MCBSP_COUNT - 2) {
++ printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
++ id + 1);
++ return -ENODEV;
++ }
++ return 0;
++ }
++
++ if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
++ if (id > OMAP_MAX_MCBSP_COUNT - 1) {
++ printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
++ id + 1);
++ return -ENODEV;
++ }
++ return 0;
++ }
++
++ return -ENODEV;
++}
++
++static void omap1_mcbsp_request(unsigned int id)
++{
++ /*
++ * On 1510, 1610 and 1710, McBSP1 and McBSP3
++ * are DSP public peripherals.
++ */
++ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
++ omap_dsp_request_mem();
++ /*
++ * DSP external peripheral reset
++ * FIXME: This should be moved to dsp code
++ */
++ __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
++ DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
++ }
++}
++
++static void omap1_mcbsp_free(unsigned int id)
++{
++ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
++ omap_dsp_release_mem();
++}
++
++static struct omap_mcbsp_ops omap1_mcbsp_ops = {
++ .check = omap1_mcbsp_check,
++ .request = omap1_mcbsp_request,
++ .free = omap1_mcbsp_free,
++};
++
++static struct omap_mcbsp_platform_data omap1_mcbsp_pdata[] = {
++#ifdef CONFIG_ARCH_OMAP730
++ {
++ .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
++ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
++ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
++ .rx_irq = INT_730_McBSP1RX,
++ .tx_irq = INT_730_McBSP1TX,
++ .ops = &omap1_mcbsp_ops,
++ },
++ {
++ .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
++ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
++ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
++ .rx_irq = INT_730_McBSP2RX,
++ .tx_irq = INT_730_McBSP2TX
++ .ops = &omap1_mcbsp_ops,
++ },
++#endif
++#ifdef CONFIG_ARCH_OMAP15XX
++ {
++ .virt_base = OMAP1510_MCBSP1_BASE,
++ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
++ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
++ .rx_irq = INT_McBSP1RX,
++ .tx_irq = INT_McBSP1TX,
++ .ops = &omap1_mcbsp_ops,
++ .clocks = { "dsp_ck", "api_ck", "dspxor_ck" },
++ },
++ {
++ .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
++ .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
++ .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
++ .rx_irq = INT_1510_SPI_RX,
++ .tx_irq = INT_1510_SPI_TX,
++ .ops = &omap1_mcbsp_ops,
++ },
++ {
++ .virt_base = OMAP1510_MCBSP3_BASE,
++ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
++ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
++ .rx_irq = INT_McBSP3RX,
++ .tx_irq = INT_McBSP3TX,
++ .ops = &omap1_mcbsp_ops,
++ .clocks = { "dsp_ck", "api_ck", "dspxor_ck" },
++ },
++#endif
++#ifdef CONFIG_ARCH_OMAP16XX
++ {
++ .virt_base = OMAP1610_MCBSP1_BASE,
++ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
++ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
++ .rx_irq = INT_McBSP1RX,
++ .tx_irq = INT_McBSP1TX,
++ .ops = &omap1_mcbsp_ops,
++ .clocks = { "dsp_ck", "api_ck", "dspxor_ck" },
++ },
++ {
++ .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
++ .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
++ .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
++ .rx_irq = INT_1610_McBSP2_RX,
++ .tx_irq = INT_1610_McBSP2_TX,
++ .ops = &omap1_mcbsp_ops,
++ },
++ {
++ .virt_base = OMAP1610_MCBSP3_BASE,
++ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
++ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
++ .rx_irq = INT_McBSP3RX,
++ .tx_irq = INT_McBSP3TX,
++ .ops = &omap1_mcbsp_ops,
++ .clocks = { "dsp_ck", "api_ck", "dspxor_ck" },
++ },
++#endif
++};
++#define mcbsp_count ARRAY_SIZE(omap1_mcbsp_pdata)
++
++int __init omap1_mcbsp_init(void)
++{
++ omap_mcbsp_register_board_cfg(omap1_mcbsp_pdata, mcbsp_count);
++
++ return omap_mcbsp_init();
++}
++arch_initcall(omap1_mcbsp_init);
+--
+1.5.5.1.67.gbdb8.dirty
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap2-git/beagleboard/00003-mcbsp-omap3-clock.patch b/packages/linux/linux-omap2-git/beagleboard/00003-mcbsp-omap3-clock.patch
new file mode 100644
index 0000000000..6d1e7d3f71
--- /dev/null
+++ b/packages/linux/linux-omap2-git/beagleboard/00003-mcbsp-omap3-clock.patch
@@ -0,0 +1,123 @@
+From: Eduardo Valentin <eduardo.valentin@indt.org.br>
+
+This patch fix the clock definition for mcbsps on clock34xx.h.
+Device identification must be done using .id field, not
+only name field.
+
+Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
+---
+ arch/arm/mach-omap2/clock34xx.h | 30 ++++++++++++++++++++----------
+ 1 files changed, 20 insertions(+), 10 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
+index 85afe1e..3fea82e 100644
+--- a/arch/arm/mach-omap2/clock34xx.h
++++ b/arch/arm/mach-omap2/clock34xx.h
+@@ -1480,7 +1480,8 @@ static const struct clksel mcbsp_15_clksel[] = {
+ };
+
+ static struct clk mcbsp5_fck = {
+- .name = "mcbsp5_fck",
++ .name = "mcbsp_fck",
++ .id = 5,
+ .init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
+@@ -1493,7 +1494,8 @@ static struct clk mcbsp5_fck = {
+ };
+
+ static struct clk mcbsp1_fck = {
+- .name = "mcbsp1_fck",
++ .name = "mcbsp_fck",
++ .id = 1,
+ .init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
+@@ -1941,7 +1943,8 @@ static struct clk gpt10_ick = {
+ };
+
+ static struct clk mcbsp5_ick = {
+- .name = "mcbsp5_ick",
++ .name = "mcbsp_ick",
++ .id = 5,
+ .parent = &core_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
+@@ -1951,7 +1954,8 @@ static struct clk mcbsp5_ick = {
+ };
+
+ static struct clk mcbsp1_ick = {
+- .name = "mcbsp1_ick",
++ .name = "mcbsp_ick",
++ .id = 1,
+ .parent = &core_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
+@@ -2754,7 +2758,8 @@ static struct clk gpt2_ick = {
+ };
+
+ static struct clk mcbsp2_ick = {
+- .name = "mcbsp2_ick",
++ .name = "mcbsp_ick",
++ .id = 2,
+ .parent = &per_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+ .enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
+@@ -2764,7 +2769,8 @@ static struct clk mcbsp2_ick = {
+ };
+
+ static struct clk mcbsp3_ick = {
+- .name = "mcbsp3_ick",
++ .name = "mcbsp_ick",
++ .id = 3,
+ .parent = &per_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+ .enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
+@@ -2774,7 +2780,8 @@ static struct clk mcbsp3_ick = {
+ };
+
+ static struct clk mcbsp4_ick = {
+- .name = "mcbsp4_ick",
++ .name = "mcbsp_ick",
++ .id = 4,
+ .parent = &per_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+ .enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
+@@ -2790,7 +2797,8 @@ static const struct clksel mcbsp_234_clksel[] = {
+ };
+
+ static struct clk mcbsp2_fck = {
+- .name = "mcbsp2_fck",
++ .name = "mcbsp_fck",
++ .id = 2,
+ .init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
+@@ -2803,7 +2811,8 @@ static struct clk mcbsp2_fck = {
+ };
+
+ static struct clk mcbsp3_fck = {
+- .name = "mcbsp3_fck",
++ .name = "mcbsp_fck",
++ .id = 3,
+ .init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
+@@ -2816,7 +2825,8 @@ static struct clk mcbsp3_fck = {
+ };
+
+ static struct clk mcbsp4_fck = {
+- .name = "mcbsp4_fck",
++ .name = "mcbsp_fck",
++ .id = 4,
+ .init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
+--
+1.5.5.1.67.gbdb8.dirty
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap2-git/beagleboard/00004-omap2-mcbsp.patch b/packages/linux/linux-omap2-git/beagleboard/00004-omap2-mcbsp.patch
new file mode 100644
index 0000000000..f31604d658
--- /dev/null
+++ b/packages/linux/linux-omap2-git/beagleboard/00004-omap2-mcbsp.patch
@@ -0,0 +1,144 @@
+From: Eduardo Valentin <eduardo.valentin@indt.org.br>
+
+This patch adds support for mach-omap2 based on current
+mcbsp platform driver.
+
+Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
+---
+ arch/arm/mach-omap2/Makefile | 2 +
+ arch/arm/mach-omap2/mcbsp.c | 105 ++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 107 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-omap2/mcbsp.c
+
+diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
+index 552664c..84fa698 100644
+--- a/arch/arm/mach-omap2/Makefile
++++ b/arch/arm/mach-omap2/Makefile
+@@ -7,6 +7,8 @@ obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
+ devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
+ clockdomain.o
+
++obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
++
+ # Functions loaded to SRAM
+ obj-$(CONFIG_ARCH_OMAP2) += sram24xx.o
+
+diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
+new file mode 100644
+index 0000000..e2ee8f7
+--- /dev/null
++++ b/arch/arm/mach-omap2/mcbsp.c
+@@ -0,0 +1,105 @@
++/*
++ * linux/arch/arm/mach-omap2/mcbsp.c
++ *
++ * Copyright (C) 2008 Instituto Nokia de Tecnologia
++ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Multichannel mode not supported.
++ */
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++
++#include <asm/arch/dma.h>
++#include <asm/arch/mux.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/mcbsp.h>
++
++static void omap2_mcbsp2_mux_setup(void)
++{
++ omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
++ omap_cfg_reg(R14_24XX_MCBSP2_FSX);
++ omap_cfg_reg(W15_24XX_MCBSP2_DR);
++ omap_cfg_reg(V15_24XX_MCBSP2_DX);
++ omap_cfg_reg(V14_24XX_GPIO117);
++ /*
++ * TODO: Need to add MUX settings for OMAP 2430 SDP
++ */
++}
++
++static void omap2_mcbsp_request(unsigned int id)
++{
++ if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
++ omap2_mcbsp2_mux_setup();
++}
++
++static int omap2_mcbsp_check(unsigned int id)
++{
++ if (id > OMAP_MAX_MCBSP_COUNT - 1) {
++ printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
++ return -ENODEV;
++ }
++ return 0;
++}
++
++static struct omap_mcbsp_ops omap2_mcbsp_ops = {
++ .request = omap2_mcbsp_request,
++ .check = omap2_mcbsp_check,
++};
++
++static struct omap_mcbsp_platform_data omap2_mcbsp_pdata[] = {
++#ifdef CONFIG_ARCH_OMAP24XX
++ {
++ .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
++ .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
++ .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
++ .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
++ .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
++ .ops = &omap2_mcbsp_ops,
++ .clocks = { "mcbsp_ick", "mcbsp_fck" },
++ },
++ {
++ .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
++ .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
++ .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
++ .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
++ .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
++ .ops = &omap2_mcbsp_ops,
++ .clocks = { "mcbsp_ick", "mcbsp_fck" },
++ },
++#endif
++#ifdef CONFIG_ARCH_OMAP34XX
++ {
++ .virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
++ .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
++ .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
++ .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
++ .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
++ .ops = &omap2_mcbsp_ops,
++ .clocks = { "mcbsp_ick", "mcbsp_fck" },
++ },
++ {
++ .virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
++ .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
++ .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
++ .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
++ .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
++ .ops = &omap2_mcbsp_ops,
++ .clocks = { "mcbsp_ick", "mcbsp_fck" },
++ },
++#endif
++};
++#define mcbsp_count ARRAY_SIZE(omap2_mcbsp_pdata)
++
++int __init omap2_mcbsp_init(void)
++{
++ omap_mcbsp_register_board_cfg(omap2_mcbsp_pdata, mcbsp_count);
++
++ return omap_mcbsp_init();
++}
++arch_initcall(omap2_mcbsp_init);
+--
+1.5.5.1.67.gbdb8.dirty
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap2-git/beagleboard/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch b/packages/linux/linux-omap2-git/beagleboard/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch
new file mode 100644
index 0000000000..6e31ead2bd
--- /dev/null
+++ b/packages/linux/linux-omap2-git/beagleboard/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch
@@ -0,0 +1,55 @@
+From a1dbb6dd28e9815a307b87b8d96dcf371d6cfd58 Mon Sep 17 00:00:00 2001
+From: Jarkko Nikula <jarkko.nikula@nokia.com>
+Date: Mon, 19 May 2008 13:24:41 +0300
+Subject: [PATCH] ASoC: OMAP: Add basic support for OMAP34xx in McBSP DAI driver
+
+This adds support for OMAP34xx McBSP port 1 and 2.
+
+Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
+---
+ sound/soc/omap/omap-mcbsp.c | 20 +++++++++++++++++++-
+ 1 files changed, 19 insertions(+), 1 deletions(-)
+
+diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
+index 40d87e6..8e6ec9d 100644
+--- a/sound/soc/omap/omap-mcbsp.c
++++ b/sound/soc/omap/omap-mcbsp.c
+@@ -99,6 +99,21 @@ static const unsigned long omap2420_mcbsp_port[][2] = {
+ static const int omap2420_dma_reqs[][2] = {};
+ static const unsigned long omap2420_mcbsp_port[][2] = {};
+ #endif
++#if defined(CONFIG_ARCH_OMAP34XX)
++static const int omap34xx_dma_reqs[][2] = {
++ { OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX },
++ { OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX },
++};
++static const unsigned long omap34xx_mcbsp_port[][2] = {
++ { OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR2,
++ OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR2 },
++ { OMAP34XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR2,
++ OMAP34XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR2 },
++};
++#else
++static const int omap34xx_dma_reqs[][2] = {};
++static const unsigned long omap34xx_mcbsp_port[][2] = {};
++#endif
+
+ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream)
+ {
+@@ -169,9 +184,12 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
+ } else if (cpu_is_omap2420()) {
+ dma = omap2420_dma_reqs[bus_id][substream->stream];
+ port = omap2420_mcbsp_port[bus_id][substream->stream];
++ } else if (cpu_is_omap343x()) {
++ dma = omap34xx_dma_reqs[bus_id][substream->stream];
++ port = omap34xx_mcbsp_port[bus_id][substream->stream];
+ } else {
+ /*
+- * TODO: Add support for 2430 and 3430
++ * TODO: Add support for 2430
+ */
+ return -ENODEV;
+ }
+--
+1.5.5.1
+
diff --git a/packages/linux/linux-omap2-git/beagleboard/defconfig b/packages/linux/linux-omap2-git/beagleboard/defconfig
index b383a09913..5b8f07209f 100644
--- a/packages/linux/linux-omap2-git/beagleboard/defconfig
+++ b/packages/linux/linux-omap2-git/beagleboard/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc3-omap1
-# Tue May 20 18:41:26 2008
+# Tue May 20 19:38:20 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,7 +179,9 @@ CONFIG_OMAP_BOOT_TAG=y
CONFIG_OMAP_BOOT_REASON=y
# CONFIG_OMAP_COMPONENT_VERSION is not set
# CONFIG_OMAP_GPIO_SWITCH is not set
-# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MMU_FWK is not set
# CONFIG_OMAP_MBOX_FWK is not set
@@ -190,6 +192,7 @@ CONFIG_OMAP_DM_TIMER=y
# CONFIG_OMAP_LL_DEBUG_UART1 is not set
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y