diff options
Diffstat (limited to 'packages/linux/linux-mtx-2-2.4.27/00-mtx-2.diff')
| -rw-r--r-- | packages/linux/linux-mtx-2-2.4.27/00-mtx-2.diff | 324 |
1 files changed, 2 insertions, 322 deletions
diff --git a/packages/linux/linux-mtx-2-2.4.27/00-mtx-2.diff b/packages/linux/linux-mtx-2-2.4.27/00-mtx-2.diff index 589446c2e9..6d1ca1c75e 100644 --- a/packages/linux/linux-mtx-2-2.4.27/00-mtx-2.diff +++ b/packages/linux/linux-mtx-2-2.4.27/00-mtx-2.diff @@ -2500,8 +2500,8 @@ diff -Nur linux-old/Documentation/Configure.help linux/Documentation/Configure.h +# +CONFIG_USBD_AU1X00_BUS=m +CONFIG_USBD_AU1X00_SCLOCK=400 -+CONFIG_AU1000_USB_DEVICE=y -+CONFIG_AU1X00_USB_DEVICE=y ++# CONFIG_AU1000_USB_DEVICE is not set ++# CONFIG_AU1X00_USB_DEVICE is not set +# CONFIG_USBD_BI_REGISTER_TRACE is not set + +# @@ -2605,326 +2605,6 @@ diff -Nur linux-old/Documentation/Configure.help linux/Documentation/Configure.h MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC."); MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550"); ---- linux/drivers/net/au1000_eth.c~00-mtx-2.diff 2006-06-10 14:01:44.602796000 +0200 -+++ linux/drivers/net/au1000_eth.c 2006-06-10 13:56:07.353719250 +0200 -@@ -6,7 +6,9 @@ - * Copyright 2002 TimeSys Corp. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com -- * -+ * Bjoern Riemer 2004 -+ * riemer@fokus.fraunhofer.de or riemer@riemer-nt.de -+ * // fixed the link beat detection with ioctls (SIOCGMIIPHY) - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it -@@ -83,7 +85,7 @@ - static int au1000_set_config(struct net_device *dev, struct ifmap *map); - static void set_rx_mode(struct net_device *); - static struct net_device_stats *au1000_get_stats(struct net_device *); --static inline void update_tx_stats(struct net_device *, u32, u32); -+static inline void update_tx_stats(struct net_device *, u32); - static inline void update_rx_stats(struct net_device *, u32); - static void au1000_timer(unsigned long); - static int au1000_ioctl(struct net_device *, struct ifreq *, int); -@@ -656,6 +658,7 @@ - ks8995m_status, - }; - -+ - #ifdef CONFIG_MIPS_BOSPORUS - struct phy_ops stub_ops = { - stub_init, -@@ -674,6 +677,7 @@ - {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0}, - {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0}, - {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1}, -+ {"Broadcom BCM5241 10/100 BaseT PHY",0x0143,0xBC31, &bcm_5201_ops,1}, - {"AMD 79C901 HomePNA PHY",0x0000,0x35c8, &am79c901_ops,0}, - {"AMD 79C874 10/100 BaseT PHY",0x0022,0x561b, &am79c874_ops,0}, - {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0}, -@@ -810,28 +814,39 @@ - int phy_found=0; - #endif - -+#if 0 -+ if (aup && aup->mii) -+ aup->mii->chip_info = NULL; -+#endif -+ -+ - /* search for total of 32 possible mii phy addresses */ - for (phy_addr = 0; phy_addr < 32; phy_addr++) { - u16 mii_status; - u16 phy_id0, phy_id1; - int i; - -- #ifdef CONFIG_BCM5222_DUAL_PHY -+#ifdef CONFIG_BCM5222_DUAL_PHY - /* Mask the already found phy, try next one */ - if (au_macs[0]->mii && au_macs[0]->mii->mii_control_reg) { - if (au_macs[0]->phy_addr == phy_addr) - continue; - } -- #endif -+#endif - - mii_status = mdio_read(dev, phy_addr, MII_STATUS); - if (mii_status == 0xffff || mii_status == 0x0000) - /* the mii is not accessable, try next one */ - continue; - -+ - phy_id0 = mdio_read(dev, phy_addr, MII_PHY_ID0); - phy_id1 = mdio_read(dev, phy_addr, MII_PHY_ID1); - -+ /*printk ("mii_probe: found PHY at address 0x%X : %04X/%04X\n", phy_addr, -+ phy_id0, phy_id1 -+ ); */ -+ - /* search our mii table for the current mii */ - for (i = 0; mii_chip_table[i].phy_id1; i++) { - if (phy_id0 == mii_chip_table[i].phy_id0 && -@@ -853,7 +868,7 @@ - // values and set indicators. We need to do - // this now since mdio_{read,write} need the - // control and data register addresses. -- #ifdef CONFIG_BCM5222_DUAL_PHY -+#ifdef CONFIG_BCM5222_DUAL_PHY - if ( mii_chip_table[i].dual_phy) { - - /* assume both phys are controlled -@@ -867,11 +882,13 @@ - aup->mii->mii_data_reg = (u32 *) - &au_macs[0]->mac->mii_data; - } -- #endif -+#endif - goto found; - } - } - } -+ return -1; -+ - found: - - #ifdef CONFIG_MIPS_BOSPORUS -@@ -1027,24 +1044,26 @@ - struct au1000_private *aup = (struct au1000_private *) dev->priv; - - if (au1000_debug > 4) -- printk(KERN_INFO "%s: reset mac, aup %x\n", -- dev->name, (unsigned)aup); -+ printk(KERN_INFO "%s: reset mac, aup %x, macid %d\n", -+ dev->name, (unsigned)aup, aup->mac_id); -+ -+ return; - - spin_lock_irqsave(&aup->lock, flags); - del_timer(&aup->timer); - hard_stop(dev); -- #ifdef CONFIG_BCM5222_DUAL_PHY -+#ifdef CONFIG_BCM5222_DUAL_PHY - if (aup->mac_id != 0) { -- #endif -+#endif - /* If BCM5222, we can't leave MAC0 in reset because then - * we can't access the dual phy for ETH1 */ - *aup->enable = MAC_EN_CLOCK_ENABLE; - au_sync_delay(2); - *aup->enable = 0; - au_sync_delay(2); -- #ifdef CONFIG_BCM5222_DUAL_PHY -+#ifdef CONFIG_BCM5222_DUAL_PHY - } -- #endif -+#endif - aup->tx_full = 0; - for (i = 0; i < NUM_RX_DMA; i++) { - /* reset control bits */ -@@ -1140,17 +1159,39 @@ - iflist[1].macen_addr = AU1550_MAC1_ENABLE; - iflist[0].irq = AU1550_MAC0_DMA_INT; - iflist[1].irq = AU1550_MAC1_DMA_INT; -+ /*printk ("***** Au1550 Ethernet *****\n");*/ - break; - #endif - default: - num_ifs = 0; - } -+ -+ { -+ unsigned long pf = au_readl(SYS_PINFUNC); -+ pf &= ~1; -+ -+ au_writel (pf, SYS_PINFUNC); -+ au_writel (0x10000, SYS_OUTPUTSET); -+ -+ } -+ -+ -+ - for(i = 0; i < num_ifs; i++) { -+ /*printk ("*** calling au1000_probe(0x%08lX, %d, %d)\n", iflist[i].base_addr, iflist[i].irq, i);*/ - dev = au1000_probe(iflist[i].base_addr, iflist[i].irq, i); -+ /*printk ("*** left au1000_probe\n");*/ -+ - iflist[i].dev = dev; -+ -+ /*printk ("*** 1\n");*/ -+ - if (dev) - found_one++; - } -+ -+ printk("Au1x Ethernet found %d ethernet devices\n", found_one); -+ - if (!found_one) - return -ENODEV; - return 0; -@@ -1194,6 +1235,7 @@ - /* Allocate the data buffers */ - aup->vaddr = (u32)dma_alloc(MAX_BUF_SIZE * - (NUM_TX_BUFFS+NUM_RX_BUFFS), &aup->dma_addr); -+ - if (!aup->vaddr) { - kfree(dev); - release_region(ioaddr, MAC_IOSIZE); -@@ -1227,6 +1269,7 @@ - setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR); - aup->mac_id = 0; - au_macs[0] = aup; -+ - } - else - if (ioaddr == iflist[1].base_addr) -@@ -1257,6 +1300,8 @@ - printk(KERN_ERR "%s: out of memory\n", dev->name); - goto err_out; - } -+ -+ aup->mii->chip_info = NULL; - aup->mii->mii_control_reg = 0; - aup->mii->mii_data_reg = 0; - -@@ -1284,6 +1329,7 @@ - aup->rx_dma_ring[i]->buff_stat = (unsigned)pDB->dma_addr; - aup->rx_db_inuse[i] = pDB; - } -+ - for (i = 0; i < NUM_TX_DMA; i++) { - pDB = GetFreeDB(aup); - if (!pDB) { -@@ -1383,12 +1429,17 @@ - aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed); - control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE; - #ifndef CONFIG_CPU_LITTLE_ENDIAN -+ /*riemer: fix for startup without cable */ -+ if (!link) -+ dev->flags &= ~IFF_RUNNING; -+ - control |= MAC_BIG_ENDIAN; - #endif - if (link && (dev->if_port == IF_PORT_100BASEFX)) { - control |= MAC_FULL_DUPLEX; - } - aup->mac->control = control; -+ aup->mac->vlan1_tag = 0x8100; /* activate vlan support */ - au_sync(); - - spin_unlock_irqrestore(&aup->lock, flags); -@@ -1541,14 +1592,11 @@ - - - static inline void --update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len) -+update_tx_stats(struct net_device *dev, u32 status) - { - struct au1000_private *aup = (struct au1000_private *) dev->priv; - struct net_device_stats *ps = &aup->stats; - -- ps->tx_packets++; -- ps->tx_bytes += pkt_len; -- - if (status & TX_FRAME_ABORTED) { - if (dev->if_port == IF_PORT_100BASEFX) { - if (status & (TX_JAB_TIMEOUT | TX_UNDERRUN)) { -@@ -1581,7 +1629,7 @@ - ptxd = aup->tx_dma_ring[aup->tx_tail]; - - while (ptxd->buff_stat & TX_T_DONE) { -- update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff); -+ update_tx_stats(dev, ptxd->status); - ptxd->buff_stat &= ~TX_T_DONE; - ptxd->len = 0; - au_sync(); -@@ -1603,6 +1651,7 @@ - static int au1000_tx(struct sk_buff *skb, struct net_device *dev) - { - struct au1000_private *aup = (struct au1000_private *) dev->priv; -+ struct net_device_stats *ps = &aup->stats; - volatile tx_dma_t *ptxd; - u32 buff_stat; - db_dest_t *pDB; -@@ -1622,7 +1671,7 @@ - return 1; - } - else if (buff_stat & TX_T_DONE) { -- update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff); -+ update_tx_stats(dev, ptxd->status); - ptxd->len = 0; - } - -@@ -1642,6 +1691,9 @@ - else - ptxd->len = skb->len; - -+ ps->tx_packets++; -+ ps->tx_bytes += ptxd->len; -+ - ptxd->buff_stat = pDB->dma_addr | TX_DMA_ENABLE; - au_sync(); - dev_kfree_skb(skb); -@@ -1840,17 +1892,35 @@ - - static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) - { -- //u16 *data = (u16 *)&rq->ifr_data; -+/* -+// This structure is used in all SIOCxMIIxxx ioctl calls -+struct mii_ioctl_data { -+ 0 u16 phy_id; -+ 1 u16 reg_num; -+ 2 u16 val_in; -+ 3 u16 val_out; -+};*/ -+ u16 *data = (u16 *)&rq->ifr_data; -+ struct au1000_private *aup = (struct au1000_private *) dev->priv; -+ //struct mii_ioctl_data *data = (struct mii_ioctl_data *) & rq->ifr_data; - - /* fixme */ - switch(cmd) { - case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */ -- //data[0] = PHY_ADDRESS; -+ case SIOCGMIIPHY: -+ if (!netif_running(dev)) -+ return -EINVAL; -+ data[0] = aup->phy_addr; - case SIOCDEVPRIVATE+1: /* Read the specified MII register. */ -- //data[3] = mdio_read(ioaddr, data[0], data[1]); -+ case SIOCGMIIREG: -+ data[3] = mdio_read(dev, data[0], data[1]); -+ //data->val_out = mdio_read(dev,data->phy_id,data->reg_num); - return 0; - case SIOCDEVPRIVATE+2: /* Write the specified MII register */ -- //mdio_write(ioaddr, data[0], data[1], data[2]); -+ case SIOCSMIIREG: -+ if (!capable(CAP_NET_ADMIN)) -+ return -EPERM; -+ mdio_write(dev, data[0], data[1],data[2]); - return 0; - default: - return -EOPNOTSUPP; --- linux-old/drivers/sound/au1550_psc.c 2004-09-19 00:07:37.000000000 +0200 +++ linux/drivers/sound/au1550_psc.c 2006-04-30 20:35:58.000000000 +0200 @@ -55,14 +55,15 @@ |