diff options
Diffstat (limited to 'packages/linux/linux-ezx/e680-leds-r1.patch')
| -rw-r--r-- | packages/linux/linux-ezx/e680-leds-r1.patch | 374 |
1 files changed, 0 insertions, 374 deletions
diff --git a/packages/linux/linux-ezx/e680-leds-r1.patch b/packages/linux/linux-ezx/e680-leds-r1.patch deleted file mode 100644 index abbab2937d..0000000000 --- a/packages/linux/linux-ezx/e680-leds-r1.patch +++ /dev/null @@ -1,374 +0,0 @@ - -# -# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher -# - ---- linux-2.6.16/arch/arm/mach-pxa/ezx.c~e680-leds-r0.patch 2006-06-06 17:14:06.000000000 +0200 -+++ linux-2.6.16/arch/arm/mach-pxa/ezx.c 2006-06-06 17:23:14.000000000 +0200 -@@ -357,6 +357,17 @@ - .num_resources = ARRAY_SIZE(ezx_backlight_resources), - }; - -+#ifdef CONFIG_PXA_EZX_E680 -+/* -+ * E680 LEDs -+ */ -+static struct platform_device e680led_device = { -+ .name = "e680-led", -+ .id = -1, -+}; -+#endif -+ -+ - /* keyboard */ - - #if defined(CONFIG_PXA_EZX_V700) -@@ -766,6 +777,9 @@ - - static struct platform_device *devices[] __initdata = { - &ezx_bp_device, -+#ifdef CONFIG_PXA_EZX_E680 -+ &e680led_device, -+#endif - }; - - static void __init ---- linux-2.6.16/drivers/leds/Kconfig~e680-leds-r0.patch 2006-06-06 17:14:05.000000000 +0200 -+++ linux-2.6.16/drivers/leds/Kconfig 2006-06-06 17:23:14.000000000 +0200 -@@ -59,6 +59,13 @@ - This option enables support for the LEDs on Sharp Zaurus - SL-6000 series. - -+config LEDS_E680 -+ tristate "LED Support for the Motorola E680(i) GSM Phone" -+ depends LEDS_CLASS && PXA_EZX_E680 -+ help -+ This options enables support for the LEDs on the -+ Motorola E680(i) GSM Phone. -+ - config LEDS_TRIGGER_TIMER - tristate "LED Timer Trigger" - depends LEDS_TRIGGERS ---- linux-2.6.16/drivers/leds/Makefile~e680-leds-r0.patch 2006-06-06 17:14:05.000000000 +0200 -+++ linux-2.6.16/drivers/leds/Makefile 2006-06-06 17:23:14.000000000 +0200 -@@ -10,7 +10,8 @@ - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o - obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o - obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o -+obj-$(CONFIG_LEDS_E680) += leds-e680.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o --obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o -\ Kein Zeilenumbruch am Dateiende. -+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o ---- /dev/null 2006-06-06 16:58:36.577045136 +0200 -+++ linux-2.6.16/drivers/leds/leds-e680.c 2006-06-06 17:55:46.000000000 +0200 -@@ -0,0 +1,307 @@ -+/* -+ * EZX Platform LED Driver for the Motorola E680(i) GSM Phone -+ * -+ * Copyright 2006 Vanille-Media -+ * -+ * Author: Michael Lauer <mickey@Vanille.de> -+ * -+ * Based on the Motorola 2.4 leds-e680.c and leds-corgi.c by Richard Purdie -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/config.h> -+#include <linux/delay.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/leds.h> -+#include <asm/mach-types.h> -+#include <asm/arch/hardware.h> -+#include <asm/arch/pxa-regs.h> -+#include <asm/arch/ezx-pcap.h> -+ -+//FIXME move defines to a common header file -+#define IND_CNTL_R_BUL 46 -+#define IND_CNTL_G_BUL 47 -+#define SSP_PCAP_LED_MASK 0x000fffe0 -+#define SSP_PCAP_LED_SHIFT 5 -+#define GPIO_TC_MM_EN 99 -+ -+static enum led_brightness old_red; -+static enum led_brightness old_green; -+static enum led_brightness old_blue; -+ -+typedef struct { -+ unsigned char ind_GPIO_red; /*Indicator Red control GPIO 46: 0 active, 1 disactive*/ -+ unsigned char ind_GPIO_green; /*Indicator Green control GPIO 47: 0 active, 1 disactive*/ -+ unsigned char pcap_LEDR_en; /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/ -+ unsigned char pcap_LEDG_en; /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/ -+ unsigned char pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/ -+ unsigned char pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/ -+ unsigned char pcap_LEDR_I; /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/ -+ unsigned char pcap_LEDG_I; /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/ -+ unsigned char pcap_SKIP_on; /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/ -+} PCAP2_LED_REGISTER_VALUE; -+ -+const PCAP2_LED_REGISTER_VALUE led_register_value[]= -+{ -+ /* on/off pulsepower timing intensity */ -+ {0x1,0x1, 0x0,0x0, 0x0,0x0, 0x0,0x0,0x0}, /* OFF */ -+ {0x0,0x1, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* RED */ -+ {0x1,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* GREEN */ -+ {0x0,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* ORANGE = RED + GREEN */ -+ {0x1,0x1, 0x0,0x1, 0x0,0xc, 0x0,0x0,0x0}, /* BLUE */ -+ {0x0,0x1, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_RED = RED + BLUE */ -+ {0x1,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_GREEN = GREEN + BLUE */ -+ {0x0,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* WHITE = RED + GREEN + BLUE */ -+}; -+ -+static void e680led_led_set( enum led_brightness red, enum led_brightness green, enum led_brightness blue ) -+{ -+ printk( KERN_DEBUG "e680led_led_set: red=%d, green=%d, blue=%d", red, green, blue ); -+ unsigned int tempValue = 0; -+ unsigned int value = 0; -+ unsigned int stateIndex = 0; -+ unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl, ledg_ctrl, ledr_i, ledg_i,skip; -+ -+ stateIndex = ( ( blue << 2 ) | ( green << 1 ) | ( red ) ) & 0x7; -+ printk( KERN_DEBUG "LED stateIndex is %d", stateIndex ); -+ gpio_red = led_register_value[stateIndex].ind_GPIO_red & 0x1; -+ gpio_green = led_register_value[stateIndex].ind_GPIO_green & 0x1; -+ ledr_en = led_register_value[stateIndex].pcap_LEDR_en & 0x1; -+ ledg_en = led_register_value[stateIndex].pcap_LEDG_en & 0x1; -+ ledr_ctrl = led_register_value[stateIndex].pcap_LEDR_CTRL & 0xf; -+ ledg_ctrl = led_register_value[stateIndex].pcap_LEDG_CTRL & 0xf; -+ ledr_i = led_register_value[stateIndex].pcap_LEDR_I & 0x3; -+ ledg_i = led_register_value[stateIndex].pcap_LEDG_I & 0x3; -+ skip = led_register_value[stateIndex].pcap_SKIP_on & 0x1; -+ -+ /* disable LEDs */ -+ if( ezx_pcap_read(SSP_PCAP_ADJ_PERIPH_REGISTER,&tempValue) != SSP_PCAP_SUCCESS ) -+ { -+ printk( KERN_WARNING "LED PCAP Read Failed\n" ); -+ return; -+ } -+ tempValue &= (~SSP_PCAP_LED_MASK); -+ if( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) != SSP_PCAP_SUCCESS ) -+ { -+ printk( KERN_WARNING "LED PCAP Write Failed (Clear Data)\n" ); -+ return; -+ } -+ -+ /* configure GPIOs as output */ -+ pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT); -+ pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT); -+ -+ //FIXME: Simplify this logic -+ if ( (gpio_green && gpio_red) ) -+ { -+ /*Disable Red & Green signal*/ -+ set_GPIO(IND_CNTL_R_BUL); /*IND_CNTL_R_BUL Low active*/ -+ PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL); -+ -+ clr_GPIO(IND_CNTL_G_BUL); /*IND_CNTL_G_BUL High active*/ -+ PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL)); -+ -+ printk( KERN_DEBUG "LED GPIO Green & Red Disable\n"); -+ } else if ( gpio_green && !gpio_red ) -+ { -+ /*Green Disable, Red Enable*/ -+ clr_GPIO(IND_CNTL_R_BUL); -+ PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL)); -+ -+ clr_GPIO(IND_CNTL_G_BUL); -+ PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL)); -+ -+ printk( KERN_DEBUG "LED GPIO Green Disable, Red Enable\n"); -+ } else if (gpio_red && !gpio_green ) -+ { -+ /*Red Disable, Green Enable*/ -+ set_GPIO(IND_CNTL_R_BUL); -+ PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL); -+ -+ set_GPIO(IND_CNTL_G_BUL); -+ PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL); -+ printk( KERN_DEBUG "LED GPIO Red Disable, Green Enable"); -+ }else -+ { -+ /*Red & Green enable*/ -+ clr_GPIO(IND_CNTL_R_BUL); -+ PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL)); -+ -+ set_GPIO(IND_CNTL_G_BUL); -+ PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL); -+ printk( KERN_DEBUG "LED GPIO Red & Green Enable\n"); -+ } -+ -+ /* Write PCAP LED Peripheral Control Register*/ -+ value = ( ledr_en | (ledg_en <<1) | (ledr_ctrl <<2) | (ledg_ctrl <<6) | -+ (ledr_i << 10) | (ledg_i <<12) | (skip <<14) ) & 0x7fff; -+ tempValue |= (value <<SSP_PCAP_LED_SHIFT); -+ -+ if ( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) == SSP_PCAP_SUCCESS ) -+ { -+ printk( KERN_DEBUG "LED PCAP Write Success (0x%x :0x%x)\n",tempValue,value); -+ old_red = red; -+ old_green = green; -+ old_blue = blue; -+ return; -+ } else { -+ printk( KERN_DEBUG "LED PCAP Write Failed (State Change)\n"); -+ return; -+ } -+} -+ -+static void e680led_red_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ printk( KERN_DEBUG "e680led_red_set: %d\n", value ); -+ e680led_led_set( 1 && value, old_green, old_blue ); -+} -+ -+static void e680led_green_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ printk( KERN_DEBUG "e680led_green_set: %d\n", value ); -+ e680led_led_set( old_red, 1 && value, old_blue ); -+} -+ -+static void e680led_blue_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ printk( KERN_DEBUG "e680led_blue_set: %d\n", value ); -+ e680led_led_set( old_red, old_green, 1 && value ); -+} -+ -+static void e680led_keypad_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ /* this is not working yet, as there is something else missing */ -+#if 0 -+ printk( KERN_DEBUG "e680led_keypad_set: %d\n", value ); -+ -+ pxa_gpio_mode(GPIO_TC_MM_EN); -+ GPDR(GPIO_TC_MM_EN) |= GPIO_bit(GPIO_TC_MM_EN); -+ GPSR(GPIO_TC_MM_EN) = GPIO_bit(GPIO_TC_MM_EN); -+ -+ udelay( 100 ); -+ -+ if ( value ) { -+ GPCR(GPIO_TC_MM_EN) = GPIO_bit(GPIO_TC_MM_EN); -+ PGSR3 &= ~GPIO_bit(GPIO_TC_MM_EN); -+ } else { -+ GPSR(GPIO_TC_MM_EN) = GPIO_bit(GPIO_TC_MM_EN); -+ PGSR3 |= GPIO_bit(GPIO_TC_MM_EN); -+ } -+#endif -+} -+ -+static struct led_classdev e680_red_led = { -+ .name = "e680:red", -+ .default_trigger = "none", -+ .brightness_set = e680led_red_set, -+}; -+ -+static struct led_classdev e680_green_led = { -+ .name = "e680:green", -+ .default_trigger = "none", -+ .brightness_set = e680led_green_set, -+}; -+ -+static struct led_classdev e680_blue_led = { -+ .name = "e680:blue", -+ .default_trigger = "none", -+ .brightness_set = e680led_blue_set, -+}; -+ -+static struct led_classdev e680_keypad_led = { -+ .name = "e680:keypad", -+ .default_trigger = "none", -+ .brightness_set = e680led_keypad_set, -+}; -+ -+#ifdef CONFIG_PM -+static int e680led_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ led_classdev_suspend(&e680_red_led); -+ led_classdev_suspend(&e680_green_led); -+ led_classdev_suspend(&e680_blue_led); -+ led_classdev_suspend(&e680_keypad_led); -+ return 0; -+} -+ -+static int e680led_resume(struct platform_device *dev) -+{ -+ led_classdev_resume(&e680_red_led); -+ led_classdev_resume(&e680_green_led); -+ led_classdev_resume(&e680_blue_led); -+ led_classdev_resume(&e680_keypad_led); -+ return 0; -+} -+#endif -+ -+static int e680led_probe(struct platform_device *pdev) -+{ -+ int ret; -+ -+ ret = led_classdev_register(&pdev->dev, &e680_red_led); -+ if (ret < 0) -+ return ret; -+ -+ ret = led_classdev_register(&pdev->dev, &e680_green_led); -+ if (ret < 0) -+ led_classdev_unregister(&e680_red_led); -+ -+ ret = led_classdev_register(&pdev->dev, &e680_blue_led); -+ if (ret < 0) { -+ led_classdev_unregister(&e680_red_led); -+ led_classdev_unregister(&e680_green_led); -+ } -+ -+ ret = led_classdev_register(&pdev->dev, &e680_keypad_led); -+ if (ret < 0) { -+ led_classdev_unregister(&e680_red_led); -+ led_classdev_unregister(&e680_green_led); -+ led_classdev_unregister(&e680_blue_led); -+ } -+ return ret; -+} -+ -+static int e680led_remove(struct platform_device *pdev) -+{ -+ led_classdev_unregister(&e680_red_led); -+ led_classdev_unregister(&e680_green_led); -+ led_classdev_unregister(&e680_blue_led); -+ led_classdev_unregister(&e680_keypad_led); -+ return 0; -+} -+ -+static struct platform_driver e680led_driver = { -+ .probe = e680led_probe, -+ .remove = e680led_remove, -+#ifdef CONFIG_PM -+ .suspend = e680led_suspend, -+ .resume = e680led_resume, -+#endif -+ .driver = { -+ .name = "e680-led", -+ }, -+}; -+ -+static int __init e680led_init(void) -+{ -+ return platform_driver_register(&e680led_driver); -+} -+ -+static void __exit e680led_exit(void) -+{ -+ e680led_led_set( 0, 0, 0 ); -+ platform_driver_unregister(&e680led_driver); -+} -+ -+module_init(e680led_init); -+module_exit(e680led_exit); -+ -+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>"); -+MODULE_DESCRIPTION("Motorola E680 LED driver"); -+MODULE_LICENSE("GPL"); |