1 files changed, 99 insertions, 0 deletions
diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch
new file mode 100644
index 0000000000..a3a6a8249a
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch
@@ -0,0 +1,99 @@
+Index: linux-2.6.21/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.21.orig/drivers/char/ts0710_mux_usb.c	2007-09-28 23:37:33.000000000 +0200
++++ linux-2.6.21/drivers/char/ts0710_mux_usb.c	2007-09-28 23:37:45.000000000 +0200
+@@ -35,10 +35,14 @@
+ #include <linux/list.h>
+ #include <linux/errno.h>
+ #include <asm/uaccess.h>
++
++#ifdef CONFIG_PXA_EZX
+ #include <asm/hardware.h>
+ #include <asm/arch/hardware.h>
+ #include <asm/arch-pxa/pxa-regs.h>
+ #include <asm/arch-pxa/ezx.h>
++#endif
++
+ #include <linux/slab.h>
+ #include <linux/miscdevice.h>
+ #include <linux/init.h>
+@@ -341,8 +345,10 @@
+ 
+ static void wakeup_timeout(unsigned long data)
+ {
++#ifdef CONFIG_PXA_EZX
+ 	GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
+ 	bvd_dbg("wakup_timeout: send GPIO_MCU_INT_SW signal!");
++#endif
+ }
+ 
+ static void suspend_timeout(unsigned long data)
+@@ -353,10 +359,12 @@
+ 		bvd_dbg("suspend_timeout: add the suspend timer again");
+ 	} else {
+ 		unlink_urbs(&bvd_ipc->readurb_mux);
++#ifdef CONFIG_PXA_EZX
+ 		UHCRHPS3 = 0x4;
+ 		mdelay(40);
+ 		bvd_dbg("suspend_timeout: send SUSPEND signal! UHCRHPS3=0x%x",
+ 			UHCRHPS3);
++#endif
+ 	}
+ }
+ 
+@@ -404,6 +412,7 @@
+ 		bvd_ipc->writeurb_mux.transfer_buffer_length = buf_num;
+ 		bvd_dbg("ipcusb_xmit_data: copy data to write urb finished! ");
+ 
++#ifdef CONFIG_PXA_EZX
+ 		if ((UHCRHPS3 & 0x4) == 0x4) {
+ 			static int ret;
+ 			int time = 0;
+@@ -442,6 +451,7 @@
+ 					"failed! status=%d\n", ret);
+ 			bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!");
+ 		}
++#endif
+ 
+ 		sumbit_times++;
+ 		bvd_ipc->write_finished_flag = 0;
+@@ -464,12 +474,16 @@
+ 
+ static void usbipc_bh_bp_func(unsigned long param)
+ {
++#ifdef CONFIG_PXA_EZX
+ 	if ((UHCRHPS3 & 0x4) == 0x4) {
+ 		UHCRHPS3 = 0x8;
++#endif
+ 		mdelay(40);
++#ifdef CONFIG_PXA_EZX
+ 		bvd_dbg("ipcusb_softint_send_readurb: Send RESUME signal! "
+ 			"UHCRHPS3=0x%x", UHCRHPS3);
+ 	}
++#endif
+ 	if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) {
+ 		//get_halted_bit();
+ 
+@@ -735,7 +749,9 @@
+ 	printk("usb_ipc_disconnect. bvd_ipc_disconnect address: %p\n", bvd_ipc_disconnect);
+ 
+ 	//FIXME: Memory leak?
++#ifdef CONFIG_PXA_EZX
+ 	if ((UHCRHPS3 & 0x4) == 0)
++#endif
+ 	//	usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
+ 
+ 	//usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
+Index: linux-2.6.21/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.21.orig/drivers/char/Kconfig	2007-09-29 10:52:18.000000000 +0200
++++ linux-2.6.21/drivers/char/Kconfig	2007-09-29 10:52:30.000000000 +0200
+@@ -1073,7 +1073,7 @@
+ 
+ config TS0710_MUX
+ 	tristate "GSM TS 07.10 Multiplex driver"
+-	depends on EZX_BP
++	depends on EZX_BP || X86
+ 	help
+ 	  This implements the GSM 07.10 multiplex.
+