1 files changed, 0 insertions, 99 deletions
diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch
deleted file mode 100644
index a3a6a8249a..0000000000
--- a/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-Index: linux-2.6.21/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.21.orig/drivers/char/ts0710_mux_usb.c	2007-09-28 23:37:33.000000000 +0200
-+++ linux-2.6.21/drivers/char/ts0710_mux_usb.c	2007-09-28 23:37:45.000000000 +0200
-@@ -35,10 +35,14 @@
- #include <linux/list.h>
- #include <linux/errno.h>
- #include <asm/uaccess.h>
-+
-+#ifdef CONFIG_PXA_EZX
- #include <asm/hardware.h>
- #include <asm/arch/hardware.h>
- #include <asm/arch-pxa/pxa-regs.h>
- #include <asm/arch-pxa/ezx.h>
-+#endif
-+
- #include <linux/slab.h>
- #include <linux/miscdevice.h>
- #include <linux/init.h>
-@@ -341,8 +345,10 @@
- 
- static void wakeup_timeout(unsigned long data)
- {
-+#ifdef CONFIG_PXA_EZX
- 	GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
- 	bvd_dbg("wakup_timeout: send GPIO_MCU_INT_SW signal!");
-+#endif
- }
- 
- static void suspend_timeout(unsigned long data)
-@@ -353,10 +359,12 @@
- 		bvd_dbg("suspend_timeout: add the suspend timer again");
- 	} else {
- 		unlink_urbs(&bvd_ipc->readurb_mux);
-+#ifdef CONFIG_PXA_EZX
- 		UHCRHPS3 = 0x4;
- 		mdelay(40);
- 		bvd_dbg("suspend_timeout: send SUSPEND signal! UHCRHPS3=0x%x",
- 			UHCRHPS3);
-+#endif
- 	}
- }
- 
-@@ -404,6 +412,7 @@
- 		bvd_ipc->writeurb_mux.transfer_buffer_length = buf_num;
- 		bvd_dbg("ipcusb_xmit_data: copy data to write urb finished! ");
- 
-+#ifdef CONFIG_PXA_EZX
- 		if ((UHCRHPS3 & 0x4) == 0x4) {
- 			static int ret;
- 			int time = 0;
-@@ -442,6 +451,7 @@
- 					"failed! status=%d\n", ret);
- 			bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!");
- 		}
-+#endif
- 
- 		sumbit_times++;
- 		bvd_ipc->write_finished_flag = 0;
-@@ -464,12 +474,16 @@
- 
- static void usbipc_bh_bp_func(unsigned long param)
- {
-+#ifdef CONFIG_PXA_EZX
- 	if ((UHCRHPS3 & 0x4) == 0x4) {
- 		UHCRHPS3 = 0x8;
-+#endif
- 		mdelay(40);
-+#ifdef CONFIG_PXA_EZX
- 		bvd_dbg("ipcusb_softint_send_readurb: Send RESUME signal! "
- 			"UHCRHPS3=0x%x", UHCRHPS3);
- 	}
-+#endif
- 	if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) {
- 		//get_halted_bit();
- 
-@@ -735,7 +749,9 @@
- 	printk("usb_ipc_disconnect. bvd_ipc_disconnect address: %p\n", bvd_ipc_disconnect);
- 
- 	//FIXME: Memory leak?
-+#ifdef CONFIG_PXA_EZX
- 	if ((UHCRHPS3 & 0x4) == 0)
-+#endif
- 	//	usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
- 
- 	//usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
-Index: linux-2.6.21/drivers/char/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/char/Kconfig	2007-09-29 10:52:18.000000000 +0200
-+++ linux-2.6.21/drivers/char/Kconfig	2007-09-29 10:52:30.000000000 +0200
-@@ -1073,7 +1073,7 @@
- 
- config TS0710_MUX
- 	tristate "GSM TS 07.10 Multiplex driver"
--	depends on EZX_BP
-+	depends on EZX_BP || X86
- 	help
- 	  This implements the GSM 07.10 multiplex.
-