diff options
Diffstat (limited to 'packages/linux/linux-ezx-2.6.21')
37 files changed, 2048 insertions, 722 deletions
diff --git a/packages/linux/linux-ezx-2.6.21/a1200/.mtn2git_empty b/packages/linux/linux-ezx-2.6.21/a1200/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/a1200/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.21/patches/defconfig-a1200 b/packages/linux/linux-ezx-2.6.21/a1200/defconfig index 36021906b7..36021906b7 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/defconfig-a1200 +++ b/packages/linux/linux-ezx-2.6.21/a1200/defconfig diff --git a/packages/linux/linux-ezx-2.6.21/a780/.mtn2git_empty b/packages/linux/linux-ezx-2.6.21/a780/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/a780/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.21/patches/defconfig-a780 b/packages/linux/linux-ezx-2.6.21/a780/defconfig index bd794af856..271b1139ab 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/defconfig-a780 +++ b/packages/linux/linux-ezx-2.6.21/a780/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21 -# Sat Jun 2 19:52:36 2007 +# Linux kernel version: 2.6.21.4 +# Fri Sep 7 09:32:15 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -198,7 +198,7 @@ CONFIG_PREEMPT=y CONFIG_NO_IDLE_HZ=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -215,9 +215,9 @@ CONFIG_ALIGNMENT_TRAP=y # # Boot options # -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 ip=169.254.1.11:169.254.1.10:169.254.1.10:255.255.255.254:ezx:usb0:off debug mem=32M@0xA0000000 mem=16M@0xAC000000" +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off debug mem=32M@0xA0000000 mem=16M@0xAC000000" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -228,6 +228,8 @@ CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 ip=169 # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats @@ -428,7 +430,7 @@ CONFIG_MTD_XIP=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_SHARP_SL is not set @@ -833,12 +835,78 @@ CONFIG_FONT_MINI_4x6=y # # Logo configuration # -# CONFIG_LOGO is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DUMMY=m +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# SoC audio support +# +CONFIG_SND_SOC=y + +# +# SoC Platforms +# + +# +# SoC Audio for the Atmel AT91 +# + +# +# SoC Audio for the Intel PXA2xx +# +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_EZX=y +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m # # HID Devices diff --git a/packages/linux/linux-ezx-2.6.21/e2/.mtn2git_empty b/packages/linux/linux-ezx-2.6.21/e2/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/e2/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.21/patches/defconfig-e2 b/packages/linux/linux-ezx-2.6.21/e2/defconfig index be512457d9..be512457d9 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/defconfig-e2 +++ b/packages/linux/linux-ezx-2.6.21/e2/defconfig diff --git a/packages/linux/linux-ezx-2.6.21/e6/.mtn2git_empty b/packages/linux/linux-ezx-2.6.21/e6/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/e6/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.21/patches/defconfig-e6 b/packages/linux/linux-ezx-2.6.21/e6/defconfig index 75ee2803d9..75ee2803d9 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/defconfig-e6 +++ b/packages/linux/linux-ezx-2.6.21/e6/defconfig diff --git a/packages/linux/linux-ezx-2.6.21/e680/.mtn2git_empty b/packages/linux/linux-ezx-2.6.21/e680/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/e680/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.21/patches/defconfig-e680 b/packages/linux/linux-ezx-2.6.21/e680/defconfig index d180351886..d180351886 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/defconfig-e680 +++ b/packages/linux/linux-ezx-2.6.21/e680/defconfig diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch index 0d2640a2e7..0bd7581965 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch @@ -1,20 +1,8 @@ -Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig -=================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-02 20:32:31.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-06-02 20:44:29.000000000 -0300 -@@ -97,6 +97,7 @@ - config PXA_EZX_A1200 - bool "Motorola A1200 GSM Phone" - select PXA27x -+ select EZX_MCI_TF - - config PXA_EZX_E6 - bool "Motorola E6 GSM Phone" Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-06-02 20:32:26.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-02 20:44:56.000000000 -0300 -@@ -13,11 +13,14 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:48:05.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:53:19.000000000 -0300 +@@ -13,6 +13,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/fb.h> @@ -23,13 +11,14 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c #include <asm/mach-types.h> #include <asm/mach/arch.h> - #include <asm/arch/pxa-regs.h> +@@ -20,12 +22,102 @@ #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> +#include <asm/arch/mmc.h> #include "generic.h" - #include "ezx.h" -@@ -25,6 +28,95 @@ + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); extern void ezx_backlight_power(int); @@ -125,7 +114,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c static struct pxafb_mode_info mode_a1200 = { .pixclock = 192308, .xres = 240, -@@ -54,6 +146,7 @@ +@@ -88,6 +180,7 @@ static void __init a1200_init(void) { set_pxa_fb_info(&a1200_fb_info); diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch new file mode 100644 index 0000000000..9bc17555cd --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch @@ -0,0 +1,53 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:44:12.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:45:56.000000000 -0300 +@@ -19,6 +19,7 @@ + #include <asm/arch/pxa-regs.h> + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> ++#include <asm/arch/ezx-pcap.h> + + #include "generic.h" + +@@ -48,7 +49,40 @@ + .pxafb_lcd_power = &ezx_lcd_power, + }; + ++/* PCAP */ ++static int __init a1200_pcap_init(void) ++{ ++ return 0; ++} ++ ++static struct pcap_platform_data a1200_pcap_platform_data = { ++ .port = 1, ++ .cs = GPIO_SPI_CE, ++ .flags = PCAP_CS_AH | PCAP_MCI_TF, ++ .clk = 1, ++ .init = a1200_pcap_init, ++}; ++ ++static struct resource a1200_pcap_resources[] = { ++ [0] = { ++ .start = IRQ_GPIO1, ++ .end = IRQ_GPIO1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device a1200_pcap_device = { ++ .name = "ezx-pcap", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(a1200_pcap_resources), ++ .resource = a1200_pcap_resources, ++ .dev = { ++ .platform_data = &a1200_pcap_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { ++ &a1200_pcap_device, + }; + + static void __init a1200_init(void) diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch index a7ca6362b0..bcac76d16c 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch @@ -1,9 +1,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-06-02 20:32:32.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-02 20:33:41.000000000 -0300 -@@ -117,6 +117,27 @@ - .exit = a1200_mci_exit, +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:54:35.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:55:00.000000000 -0300 +@@ -173,8 +173,33 @@ + }, }; +/* PCAP_TS */ @@ -23,17 +23,15 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c +struct platform_device pcap_ts_device = { + .name = "pcap-ts", + .id = -1, ++ .dev = { ++ .parent = &a1200_pcap_device.dev, ++ }, + .num_resources = ARRAY_SIZE(pcap_ts_resources), + .resource = pcap_ts_resources, +}; + - static struct pxafb_mode_info mode_a1200 = { - .pixclock = 192308, - .xres = 240, -@@ -141,6 +162,7 @@ - }; - static struct platform_device *devices[] __initdata = { + &a1200_pcap_device, + &pcap_ts_device, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch new file mode 100644 index 0000000000..1477ce48ea --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch @@ -0,0 +1,38 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:46:15.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:52:09.000000000 -0300 +@@ -219,8 +219,33 @@ + }, + }; + ++/* EMU */ ++static struct resource a780_emu_resources[] = { ++ [0] = { ++ .start = EZX_IRQ_USB4V, ++ .end = EZX_IRQ_USB4V, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = EZX_IRQ_USB1V, ++ .end = EZX_IRQ_USB1V, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device a780_emu_device = { ++ .name = "ezx-emu", ++ .id = -1, ++ .dev = { ++ .parent = &a780_pcap_device.dev, ++ }, ++ .num_resources = ARRAY_SIZE(a780_emu_resources), ++ .resource = a780_emu_resources, ++}; ++ + static struct platform_device *devices[] __initdata = { + &a780_pcap_device, ++ &a780_emu_device, + }; + + static void __init a780_init(void) diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch index b93b1b14e4..4c61a35ec2 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-06-08 18:38:47.000000000 +0200 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-08 18:38:50.000000000 +0200 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:58:07.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 20:02:00.000000000 -0300 @@ -17,6 +17,7 @@ #include <linux/mmc/host.h> #include <linux/irq.h> @@ -10,8 +10,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c #include <asm/mach-types.h> #include <asm/mach/arch.h> -@@ -214,8 +215,31 @@ - }, +@@ -319,10 +320,33 @@ + .resource = pcap_ts_resources, }; +static struct gpio_keys_button a780flip_buttons[] = { @@ -37,6 +37,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c + + static struct platform_device *devices[] __initdata = { + &a780_pcap_device, + &a780_emu_device, &pcap_ts_device, + &a780flip_device, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch index 902889abe6..9f26b3dd94 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-05-24 00:54:38.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-05-24 00:56:22.000000000 -0300 -@@ -16,18 +16,21 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:52:09.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:56:13.000000000 -0300 +@@ -16,6 +16,7 @@ #include <linux/fb.h> #include <linux/mmc/host.h> #include <linux/irq.h> @@ -10,13 +10,13 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c #include <asm/mach-types.h> #include <asm/mach/arch.h> - #include <asm/arch/pxa-regs.h> - #include <asm/arch/pxafb.h> +@@ -24,11 +25,13 @@ + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> #include <asm/arch/mmc.h> +#include <asm/arch/kbd.h> #include "generic.h" - #include "ezx.h" extern void ezx_lcd_power(int, struct fb_var_screeninfo *); extern void ezx_backlight_power(int); @@ -24,8 +24,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c #ifdef CONFIG_EZX_PCAP extern int ezx_pcap_mmcsd_power(int); -@@ -141,6 +144,55 @@ - .pxafb_lcd_power = &ezx_lcd_power, +@@ -243,6 +246,55 @@ + .resource = a780_emu_resources, }; +static unsigned char a780_keycode[] = { @@ -78,9 +78,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c +}; + static struct platform_device *devices[] __initdata = { - }; - -@@ -159,6 +211,7 @@ + &a780_pcap_device, + &a780_emu_device, +@@ -263,6 +315,7 @@ set_pxa_fb_info(&a780_fb_info); pxa_set_mci_info(&a780_mci_platform_data); diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch index 5a9a9383f7..ff7a0b3dab 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch @@ -5,8 +5,8 @@ Index: linux-2.6.21/drivers/leds/Kconfig =================================================================== ---- linux-2.6.21.orig/drivers/leds/Kconfig 2007-06-08 18:33:45.000000000 +0200 -+++ linux-2.6.21/drivers/leds/Kconfig 2007-06-08 18:39:04.000000000 +0200 +--- linux-2.6.21.orig/drivers/leds/Kconfig 2007-08-01 19:38:44.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Kconfig 2007-08-01 20:03:29.000000000 -0300 @@ -104,6 +104,13 @@ These triggers allow kernel events to drive the LEDs and can be configured via sysfs. If unsure, say Y. @@ -23,8 +23,8 @@ Index: linux-2.6.21/drivers/leds/Kconfig depends on LEDS_TRIGGERS Index: linux-2.6.21/drivers/leds/Makefile =================================================================== ---- linux-2.6.21.orig/drivers/leds/Makefile 2007-06-08 18:33:45.000000000 +0200 -+++ linux-2.6.21/drivers/leds/Makefile 2007-06-08 18:39:04.000000000 +0200 +--- linux-2.6.21.orig/drivers/leds/Makefile 2007-08-01 19:38:44.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Makefile 2007-08-01 20:03:29.000000000 -0300 @@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o obj-$(CONFIG_LEDS_H1940) += leds-h1940.o @@ -36,7 +36,7 @@ Index: linux-2.6.21/drivers/leds/Makefile Index: linux-2.6.21/drivers/leds/leds-a780.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/drivers/leds/leds-a780.c 2007-06-08 18:39:04.000000000 +0200 ++++ linux-2.6.21/drivers/leds/leds-a780.c 2007-08-01 20:03:29.000000000 -0300 @@ -0,0 +1,122 @@ +/* + * EZX Platform LED Driver for the Motorola A780 GSM Phone @@ -162,18 +162,23 @@ Index: linux-2.6.21/drivers/leds/leds-a780.c +MODULE_LICENSE("GPL"); Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-06-08 18:38:50.000000000 +0200 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-08 18:39:04.000000000 +0200 -@@ -236,10 +236,15 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 20:02:00.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 20:03:29.000000000 -0300 +@@ -341,12 +341,20 @@ }, }; +static struct platform_device a780led_device = { + .name = "a780-led", + .id = -1, ++ .dev = { ++ .parent = &a780_pcap_device.dev, ++ }, +}; static struct platform_device *devices[] __initdata = { + &a780_pcap_device, + &a780_emu_device, &pcap_ts_device, &a780flip_device, + &a780led_device, diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch index 4877bfffa5..3cf1848502 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-05-24 00:44:14.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-05-24 00:47:01.000000000 -0300 -@@ -14,11 +14,14 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 22:45:00.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 22:53:03.000000000 -0300 +@@ -14,6 +14,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/fb.h> @@ -11,13 +11,14 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c #include <asm/mach-types.h> #include <asm/mach/arch.h> - #include <asm/arch/pxa-regs.h> +@@ -21,12 +23,102 @@ #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> +#include <asm/arch/mmc.h> #include "generic.h" - #include "ezx.h" -@@ -26,6 +29,95 @@ + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); extern void ezx_backlight_power(int); @@ -113,7 +114,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c static struct pxafb_mode_info mode_a780 = { .pixclock = 150000, .xres = 240, -@@ -66,6 +158,7 @@ +@@ -145,6 +237,7 @@ PSLR = 0x05800f00; set_pxa_fb_info(&a780_fb_info); @@ -121,15 +122,3 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */ pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT); -Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig -=================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-05-24 00:47:13.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-05-24 00:48:11.000000000 -0300 -@@ -87,6 +87,7 @@ - config PXA_EZX_A780 - bool "Motorola A780 GSM Phone" - select PXA27x -+ select EZX_MCI_TF - - config PXA_EZX_E2 - bool "Motorola E2 GSM Phone" diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch new file mode 100644 index 0000000000..35417344e0 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch @@ -0,0 +1,98 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 22:44:12.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 22:45:00.000000000 -0300 +@@ -20,6 +20,7 @@ + #include <asm/arch/pxa-regs.h> + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> ++#include <asm/arch/ezx-pcap.h> + + #include "generic.h" + +@@ -49,7 +50,85 @@ + .pxafb_lcd_power = &ezx_lcd_power, + }; + ++/* PCAP */ ++static int __init a780_pcap_init(void) ++{ ++ /* initialize PCAP registers */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1CTRL, 1); ++// ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL3); ++ ++ /* set SW1 sleep to keep SW1 1.3v in sync mode */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE10, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE11, 0); ++ ++ /* SW1 active in sync mode */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE00, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE01, 0); ++ ++ /* at SW1 -core voltage to 1.30V */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW10_DVS, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW11_DVS, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW12_DVS, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW13_DVS, 0); ++ ++ /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_LOWPWR, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_LOWPWR, 0); ++ ++ /* ++ * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 --- ++ * camera for e680 ++ */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_LOWPWR, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_LOWPWR, 0); ++ ++ /* set Vc to low power mode when AP sleep */ ++// SSP_PCAP_bit_set( SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VC_STBY); ++ ++ /* set VAUX2 to voltage 2.775V and low power mode when AP sleep */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_1, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_0, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_LOWPWR, 1); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN, 1); ++ ++// PGSR(GPIO34_TXENB) |= GPIO_bit(GPIO34_TXENB); ++ ++ return 0; ++} ++ ++static struct pcap_platform_data a780_pcap_platform_data = { ++ .port = 1, ++ .cs = GPIO_SPI_CE, ++ .flags = PCAP_MCI_TF, ++ .clk = 1, ++ .init = a780_pcap_init, ++}; ++ ++static struct resource a780_pcap_resources[] = { ++ [0] = { ++ .start = IRQ_GPIO1, ++ .end = IRQ_GPIO1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device a780_pcap_device = { ++ .name = "ezx-pcap", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(a780_pcap_resources), ++ .resource = a780_pcap_resources, ++ .dev = { ++ .platform_data = &a780_pcap_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { ++ &a780_pcap_device, + }; + + static void __init a780_init(void) diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch index a4a476ac59..7c455cfb3a 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch @@ -1,9 +1,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-06-02 20:32:48.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-02 20:33:10.000000000 -0300 -@@ -121,6 +121,27 @@ - .exit = a780_mci_exit, +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:56:13.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:58:07.000000000 -0300 +@@ -295,9 +295,34 @@ + }, }; +/* PCAP_TS */ @@ -23,17 +23,16 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c +struct platform_device pcap_ts_device = { + .name = "pcap-ts", + .id = -1, ++ .dev = { ++ .parent = &a780_pcap_device.dev, ++ }, + .num_resources = ARRAY_SIZE(pcap_ts_resources), + .resource = pcap_ts_resources, +}; + - static struct pxafb_mode_info mode_a780 = { - .pixclock = 150000, - .xres = 240, -@@ -194,6 +215,7 @@ - }; - static struct platform_device *devices[] __initdata = { + &a780_pcap_device, + &a780_emu_device, + &pcap_ts_device, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch new file mode 100644 index 0000000000..572485dde6 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch @@ -0,0 +1,38 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:53:13.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:55:54.000000000 -0300 +@@ -222,8 +222,33 @@ + }, + }; + ++/* EMU */ ++static struct resource e680_emu_resources[] = { ++ [0] = { ++ .start = EZX_IRQ_USB4V, ++ .end = EZX_IRQ_USB4V, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = EZX_IRQ_USB1V, ++ .end = EZX_IRQ_USB1V, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device e680_emu_device = { ++ .name = "ezx-emu", ++ .id = -1, ++ .dev = { ++ .parent = &e680_pcap_device.dev, ++ }, ++ .num_resources = ARRAY_SIZE(e680_emu_resources), ++ .resource = e680_emu_resources, ++}; ++ + static struct platform_device *devices[] __initdata = { + &e680_pcap_device, ++ &e680_emu_device, + }; + + static void __init e680_init(void) diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch index 2a2d9c7a72..0d2047c2c1 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-05-24 00:54:39.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-05-24 00:56:30.000000000 -0300 -@@ -15,18 +15,21 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:55:54.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:56:21.000000000 -0300 +@@ -15,6 +15,7 @@ #include <linux/fb.h> #include <linux/mmc/host.h> #include <linux/irq.h> @@ -10,13 +10,13 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c #include <asm/mach-types.h> #include <asm/mach/arch.h> - #include <asm/arch/pxa-regs.h> - #include <asm/arch/pxafb.h> +@@ -23,11 +24,13 @@ + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> #include <asm/arch/mmc.h> +#include <asm/arch/kbd.h> #include "generic.h" - #include "ezx.h" extern void ezx_lcd_power(int, struct fb_var_screeninfo *); extern void ezx_backlight_power(int); @@ -24,8 +24,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c #ifdef CONFIG_EZX_PCAP extern int ezx_pcap_mmcsd_power(int); -@@ -144,6 +147,58 @@ - .pxafb_lcd_power = &ezx_lcd_power, +@@ -246,6 +249,58 @@ + .resource = e680_emu_resources, }; +static unsigned char e680_keycode[] = { @@ -81,9 +81,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c +}; + static struct platform_device *devices[] __initdata = { - }; - -@@ -162,6 +217,7 @@ + &e680_pcap_device, + &e680_emu_device, +@@ -266,6 +321,7 @@ set_pxa_fb_info(&e680_fb_info); pxa_set_mci_info(&e680_mci_platform_data); diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch index 82dc93b611..beffb28a04 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch @@ -5,8 +5,8 @@ Index: linux-2.6.21/drivers/leds/Kconfig =================================================================== ---- linux-2.6.21.orig/drivers/leds/Kconfig 2007-06-08 18:39:04.000000000 +0200 -+++ linux-2.6.21/drivers/leds/Kconfig 2007-06-08 18:39:12.000000000 +0200 +--- linux-2.6.21.orig/drivers/leds/Kconfig 2007-08-01 20:03:29.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Kconfig 2007-08-01 20:04:02.000000000 -0300 @@ -111,6 +111,13 @@ This option enables support for the LEDs on the Motorola A780 GSM Phone. @@ -23,8 +23,8 @@ Index: linux-2.6.21/drivers/leds/Kconfig depends on LEDS_TRIGGERS Index: linux-2.6.21/drivers/leds/Makefile =================================================================== ---- linux-2.6.21.orig/drivers/leds/Makefile 2007-06-08 18:39:04.000000000 +0200 -+++ linux-2.6.21/drivers/leds/Makefile 2007-06-08 18:39:12.000000000 +0200 +--- linux-2.6.21.orig/drivers/leds/Makefile 2007-08-01 20:03:29.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Makefile 2007-08-01 20:04:02.000000000 -0300 @@ -17,6 +17,7 @@ obj-$(CONFIG_LEDS_H1940) += leds-h1940.o obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o @@ -36,8 +36,8 @@ Index: linux-2.6.21/drivers/leds/Makefile Index: linux-2.6.21/drivers/leds/leds-e680.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/drivers/leds/leds-e680.c 2007-06-08 18:39:12.000000000 +0200 -@@ -0,0 +1,309 @@ ++++ linux-2.6.21/drivers/leds/leds-e680.c 2007-08-01 20:04:02.000000000 -0300 +@@ -0,0 +1,235 @@ +/* + * EZX Platform LED Driver for the Motorola E680(i) GSM Phone + * @@ -73,147 +73,100 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c +extern int ezx_pcap_read(u_int8_t, u_int32_t *); +extern int ezx_pcap_write(u_int8_t, u_int32_t); + -+static enum led_brightness old_red; -+static enum led_brightness old_green; -+static enum led_brightness old_blue; -+ +typedef struct { -+ unsigned char ind_GPIO_red; /*Indicator Red control GPIO 46: 0 active, 1 disactive*/ -+ unsigned char ind_GPIO_green; /*Indicator Green control GPIO 47: 0 active, 1 disactive*/ -+ unsigned char pcap_LEDR_en; /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/ -+ unsigned char pcap_LEDG_en; /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/ -+ unsigned char pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/ -+ unsigned char pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/ -+ unsigned char pcap_LEDR_I; /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/ -+ unsigned char pcap_LEDG_I; /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/ -+ unsigned char pcap_SKIP_on; /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/ ++ u_int8_t ind_GPIO_red; /*Indicator Red control GPIO 46: 0 active, 1 inactive */ ++ u_int8_t ind_GPIO_green; /*Indicator Green control GPIO 47: 0 inactive, 1 active */ ++ u_int8_t pcap_LEDR_en; /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/ ++ u_int8_t pcap_LEDG_en; /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/ ++ u_int8_t pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/ ++ u_int8_t pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/ ++ u_int8_t pcap_LEDR_I; /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/ ++ u_int8_t pcap_LEDG_I; /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/ ++// u_int8_t pcap_SKIP_on; /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/ +} PCAP2_LED_REGISTER_VALUE; + +const PCAP2_LED_REGISTER_VALUE led_register_value[]= +{ -+ /* on/off pulsepower timing intensity */ -+ {0x1,0x1, 0x0,0x0, 0x0,0x0, 0x0,0x0,0x0}, /* OFF */ -+ {0x0,0x1, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* RED */ -+ {0x1,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* GREEN */ -+ {0x0,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* ORANGE = RED + GREEN */ -+ {0x1,0x1, 0x0,0x1, 0x0,0xc, 0x0,0x0,0x0}, /* BLUE */ -+ {0x0,0x1, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_RED = RED + BLUE */ -+ {0x1,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_GREEN = GREEN + BLUE */ -+ {0x0,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* WHITE = RED + GREEN + BLUE */ ++ {0x1,0x0, 0x0,0x0, 0x0,0x0, 0x1,0x0}, /* 0 OFF */ ++ ++ {0x0,0x0, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 1 RED */ ++ {0x1,0x1, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 2 GREEN */ ++ {0x0,0x1, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 3 ORANGE */ ++ {0x1,0x0, 0x0,0x1, 0x0,0xf, 0x0,0x0}, /* 4 BLUE */ ++ {0x0,0x0, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 5 MAGENTA */ ++ {0x1,0x1, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 6 CYAN */ ++ {0x0,0x1, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 7 WHITE */ +}; + -+static void e680led_led_set( enum led_brightness red, enum led_brightness green, enum led_brightness blue ) ++static void e680led_set(struct led_classdev *led_cdev, enum led_brightness value) +{ -+ unsigned int tempValue = 0; -+ unsigned int value = 0; -+ unsigned int stateIndex = 0; -+ unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl, ledg_ctrl, ledr_i, ledg_i,skip; -+ -+ printk( KERN_DEBUG "e680led_led_set: red=%d, green=%d, blue=%d", red, green, blue ); -+ stateIndex = ( ( blue << 2 ) | ( green << 1 ) | ( red ) ) & 0x7; -+ printk( KERN_DEBUG "LED stateIndex is %d", stateIndex ); -+ gpio_red = led_register_value[stateIndex].ind_GPIO_red & 0x1; -+ gpio_green = led_register_value[stateIndex].ind_GPIO_green & 0x1; -+ ledr_en = led_register_value[stateIndex].pcap_LEDR_en & 0x1; -+ ledg_en = led_register_value[stateIndex].pcap_LEDG_en & 0x1; -+ ledr_ctrl = led_register_value[stateIndex].pcap_LEDR_CTRL & 0xf; -+ ledg_ctrl = led_register_value[stateIndex].pcap_LEDG_CTRL & 0xf; -+ ledr_i = led_register_value[stateIndex].pcap_LEDR_I & 0x3; -+ ledg_i = led_register_value[stateIndex].pcap_LEDG_I & 0x3; -+ skip = led_register_value[stateIndex].pcap_SKIP_on & 0x1; -+ -+ /* disable LEDs */ -+ if( ezx_pcap_read(SSP_PCAP_ADJ_PERIPH_REGISTER,&tempValue) != SSP_PCAP_SUCCESS ) -+ { -+ printk( KERN_WARNING "LED PCAP Read Failed\n" ); -+ return; ++ unsigned int tempValue; ++ unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl, ++ ledg_ctrl, ledr_i, ledg_i, skip, t, color; ++ unsigned char t_mask[2] = { 0xc, 0xc }; ++ ++ skip = 0; ++ if (value & 128) { ++ value &= (~128); ++ skip = 1; + } -+ tempValue &= (~SSP_PCAP_LED_MASK); -+ if( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) != SSP_PCAP_SUCCESS ) -+ { -+ printk( KERN_WARNING "LED PCAP Write Failed (Clear Data)\n" ); -+ return; ++ ++ /* 7 colors - simple on */ ++ if (value <= 7) ++ color = value; ++ /* 4 colors - 11 timed on */ ++ else if (value <= 51) { ++ value -= 7; ++ color = ((value-1)%4)+1; ++ t = ((value-1)/4)+1; ++ t_mask[0] = t; ++ t_mask[1] = t; ++ } ++ /* 3 colors - 22 change color */ ++ else if (value <= 84) { ++ value -= 51; ++ color = ((value-1)%3)+5; ++ t = ((value-1)/3)+1; ++ t_mask[1] = t; ++ } ++ else if (value <= 117) { ++ value -= 84; ++ color = ((value-1)%3)+5; ++ t = ((value-1)/3)+1; ++ t_mask[0] = t; + } ++ /* 3 colors - alternate with blue */ ++ else if (value <= 120) { ++ color = value-113; ++ t_mask[0] = 0xa; ++ t_mask[1] = 0xb; ++ } ++ /* invalid value */ ++ else ++ color = 1; + -+ /* configure GPIOs as output */ -+ pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT); -+ pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT); ++ gpio_red = led_register_value[color].ind_GPIO_red; ++ gpio_green = led_register_value[color].ind_GPIO_green; ++ ledr_en = led_register_value[color].pcap_LEDR_en; ++ ledg_en = led_register_value[color].pcap_LEDG_en; ++ ledr_ctrl = led_register_value[color].pcap_LEDR_CTRL & t_mask[0]; ++ ledg_ctrl = led_register_value[color].pcap_LEDG_CTRL & t_mask[1]; ++ ledr_i = led_register_value[color].pcap_LEDR_I; ++ ledg_i = led_register_value[color].pcap_LEDG_I; + -+ //FIXME: Simplify this logic -+ if ( (gpio_green && gpio_red) ) -+ { -+ /*Disable Red & Green signal*/ -+ pxa_gpio_set_value(IND_CNTL_R_BUL, 1); /*IND_CNTL_R_BUL Low active*/ -+ PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL); -+ -+ pxa_gpio_set_value(IND_CNTL_G_BUL, 0); /*IND_CNTL_G_BUL High active*/ -+ PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL)); -+ -+ printk( KERN_DEBUG "LED GPIO Green & Red Disable\n"); -+ } else if ( gpio_green && !gpio_red ) -+ { -+ /*Green Disable, Red Enable*/ -+ pxa_gpio_set_value(IND_CNTL_R_BUL, 0); -+ PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL)); -+ -+ pxa_gpio_set_value(IND_CNTL_G_BUL, 0); -+ PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL)); -+ -+ printk( KERN_DEBUG "LED GPIO Green Disable, Red Enable\n"); -+ } else if (gpio_red && !gpio_green ) -+ { -+ /*Red Disable, Green Enable*/ -+ pxa_gpio_set_value(IND_CNTL_R_BUL, 1); -+ PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL); -+ -+ pxa_gpio_set_value(IND_CNTL_G_BUL, 1); -+ PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL); -+ printk( KERN_DEBUG "LED GPIO Red Disable, Green Enable"); -+ }else -+ { -+ /*Red & Green enable*/ -+ pxa_gpio_set_value(IND_CNTL_R_BUL, 0); -+ PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL)); -+ -+ pxa_gpio_set_value(IND_CNTL_G_BUL, 1); -+ PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL); -+ printk( KERN_DEBUG "LED GPIO Red & Green Enable\n"); -+ } ++ ezx_pcap_read(SSP_PCAP_ADJ_PERIPH_REGISTER,&tempValue); + -+ /* Write PCAP LED Peripheral Control Register*/ -+ value = ( ledr_en | (ledg_en <<1) | (ledr_ctrl <<2) | (ledg_ctrl <<6) | -+ (ledr_i << 10) | (ledg_i <<12) | (skip <<14) ) & 0x7fff; -+ tempValue |= (value <<SSP_PCAP_LED_SHIFT); -+ -+ if ( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) == SSP_PCAP_SUCCESS ) -+ { -+ printk( KERN_DEBUG "LED PCAP Write Success (0x%x :0x%x)\n",tempValue,value); -+ old_red = red; -+ old_green = green; -+ old_blue = blue; -+ return; -+ } else { -+ printk( KERN_DEBUG "LED PCAP Write Failed (State Change)\n"); -+ return; -+ } -+} ++ tempValue &= (~SSP_PCAP_LED_MASK); + -+static void e680led_red_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ printk( KERN_DEBUG "e680led_red_set: %d\n", value ); -+ e680led_led_set( 1 && value, old_green, old_blue ); -+} ++ pxa_gpio_set_value(IND_CNTL_R_BUL, gpio_red); ++ pxa_gpio_set_value(IND_CNTL_G_BUL, gpio_green); + -+static void e680led_green_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ printk( KERN_DEBUG "e680led_green_set: %d\n", value ); -+ e680led_led_set( old_red, 1 && value, old_blue ); -+} ++ /* Write PCAP LED Peripheral Control Register*/ ++ tempValue = ((ledr_en | (ledg_en << 1) | (ledr_ctrl << 2) | ++ (ledg_ctrl << 6) | (ledr_i << 10) | (ledg_i << 12) | ++ (skip << 14)) & 0x7fff) << SSP_PCAP_LED_SHIFT; + -+static void e680led_blue_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ printk( KERN_DEBUG "e680led_blue_set: %d\n", value ); -+ e680led_led_set( old_red, old_green, 1 && value ); ++ ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue); +} + +static void e680led_keypad_set(struct led_classdev *led_cdev, enum led_brightness value) @@ -238,25 +191,13 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c +#endif +} + -+static struct led_classdev e680_red_led = { -+ .name = "e680:red", -+ .default_trigger = "none", -+ .brightness_set = e680led_red_set, -+}; -+ -+static struct led_classdev e680_green_led = { -+ .name = "e680:green", ++static struct led_classdev e680_led = { ++ .name = "e680:led", + .default_trigger = "none", -+ .brightness_set = e680led_green_set, ++ .brightness_set = e680led_set, +}; + -+static struct led_classdev e680_blue_led = { -+ .name = "e680:blue", -+ .default_trigger = "none", -+ .brightness_set = e680led_blue_set, -+}; -+ -+static struct led_classdev e680_keypad_led = { ++static struct led_classdev e680_keypad = { + .name = "e680:keypad", + .default_trigger = "none", + .brightness_set = e680led_keypad_set, @@ -265,19 +206,15 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c +#ifdef CONFIG_PM +static int e680led_suspend(struct platform_device *dev, pm_message_t state) +{ -+ led_classdev_suspend(&e680_red_led); -+ led_classdev_suspend(&e680_green_led); -+ led_classdev_suspend(&e680_blue_led); -+ led_classdev_suspend(&e680_keypad_led); ++ led_classdev_suspend(&e680_led); ++ led_classdev_suspend(&e680_keypad); + return 0; +} + +static int e680led_resume(struct platform_device *dev) +{ -+ led_classdev_resume(&e680_red_led); -+ led_classdev_resume(&e680_green_led); -+ led_classdev_resume(&e680_blue_led); -+ led_classdev_resume(&e680_keypad_led); ++ led_classdev_resume(&e680_led); ++ led_classdev_resume(&e680_keypad); + return 0; +} +#endif @@ -286,35 +223,25 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c +{ + int ret; + -+ ret = led_classdev_register(&pdev->dev, &e680_red_led); -+ if (ret < 0) -+ return ret; ++ /* configure GPIOs as output */ ++ pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT); ++ pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT); + -+ ret = led_classdev_register(&pdev->dev, &e680_green_led); ++ ret = led_classdev_register(&pdev->dev, &e680_led); + if (ret < 0) -+ led_classdev_unregister(&e680_red_led); -+ -+ ret = led_classdev_register(&pdev->dev, &e680_blue_led); -+ if (ret < 0) { -+ led_classdev_unregister(&e680_red_led); -+ led_classdev_unregister(&e680_green_led); -+ } ++ return ret; + -+ ret = led_classdev_register(&pdev->dev, &e680_keypad_led); ++ ret = led_classdev_register(&pdev->dev, &e680_keypad); + if (ret < 0) { -+ led_classdev_unregister(&e680_red_led); -+ led_classdev_unregister(&e680_green_led); -+ led_classdev_unregister(&e680_blue_led); ++ led_classdev_unregister(&e680_led); + } + return ret; +} + +static int e680led_remove(struct platform_device *pdev) +{ -+ led_classdev_unregister(&e680_red_led); -+ led_classdev_unregister(&e680_green_led); -+ led_classdev_unregister(&e680_blue_led); -+ led_classdev_unregister(&e680_keypad_led); ++ led_classdev_unregister(&e680_led); ++ led_classdev_unregister(&e680_keypad); + return 0; +} + @@ -337,7 +264,6 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c + +static void __exit e680led_exit(void) +{ -+ e680led_led_set( 0, 0, 0 ); + platform_driver_unregister(&e680led_driver); +} + @@ -349,18 +275,23 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c +MODULE_LICENSE("GPL"); Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-06-08 18:38:59.000000000 +0200 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-08 18:39:12.000000000 +0200 -@@ -242,9 +242,15 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 20:02:32.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 20:04:02.000000000 -0300 +@@ -347,11 +347,20 @@ }, }; +static struct platform_device e680led_device = { + .name = "e680-led", + .id = -1, ++ .dev = { ++ .parent = &e680_pcap_device.dev, ++ }, +}; + static struct platform_device *devices[] __initdata = { + &e680_pcap_device, + &e680_emu_device, &pcap_ts_device, &e680locksw_device, + &e680led_device, diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch index 36b52a916a..a0c1ebbfbe 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-06-08 18:38:48.000000000 +0200 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-08 18:38:59.000000000 +0200 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:58:54.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 20:02:32.000000000 -0300 @@ -16,6 +16,7 @@ #include <linux/mmc/host.h> #include <linux/irq.h> @@ -10,8 +10,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c #include <asm/mach-types.h> #include <asm/mach/arch.h> -@@ -220,8 +221,30 @@ - }, +@@ -325,10 +326,32 @@ + .resource = pcap_ts_resources, }; +static struct gpio_keys_button e680locksw_buttons[] = { @@ -36,6 +36,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c +}; + static struct platform_device *devices[] __initdata = { + &e680_pcap_device, + &e680_emu_device, &pcap_ts_device, + &e680locksw_device, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch index b5bb2931f1..40b56b9b6c 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-05-24 00:43:08.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-05-24 00:48:20.000000000 -0300 -@@ -13,11 +13,14 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 22:45:27.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 22:53:10.000000000 -0300 +@@ -13,6 +13,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/fb.h> @@ -11,13 +11,14 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c #include <asm/mach-types.h> #include <asm/mach/arch.h> - #include <asm/arch/pxa-regs.h> +@@ -20,12 +22,106 @@ #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> +#include <asm/arch/mmc.h> #include "generic.h" - #include "ezx.h" -@@ -25,6 +28,99 @@ + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); extern void ezx_backlight_power(int); @@ -117,7 +118,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c static struct pxafb_mode_info mode_e680 = { .pixclock = 150000, .xres = 240, -@@ -65,6 +161,7 @@ +@@ -144,6 +240,7 @@ PSLR = 0x05800f00; set_pxa_fb_info(&e680_fb_info); @@ -125,15 +126,3 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */ pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT); -Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig -=================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-05-24 00:48:28.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-05-24 00:48:55.000000000 -0300 -@@ -83,6 +83,7 @@ - config PXA_EZX_E680 - bool "Motorola E680 GSM Phone" - select PXA27x -+ select EZX_MCI_SD - - config PXA_EZX_A780 - bool "Motorola A780 GSM Phone" diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch new file mode 100644 index 0000000000..e974be9b4e --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch @@ -0,0 +1,98 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 22:44:12.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 22:45:27.000000000 -0300 +@@ -19,6 +19,7 @@ + #include <asm/arch/pxa-regs.h> + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> ++#include <asm/arch/ezx-pcap.h> + + #include "generic.h" + +@@ -48,7 +49,85 @@ + .pxafb_lcd_power = &ezx_lcd_power, + }; + ++/* PCAP */ ++static int __init e680_pcap_init(void) ++{ ++ /* initialize PCAP registers */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1CTRL, 1); ++// ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL3); ++ ++ /* set SW1 sleep to keep SW1 1.3v in sync mode */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE10, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE11, 0); ++ ++ /* SW1 active in sync mode */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE00, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE01, 0); ++ ++ /* at SW1 -core voltage to 1.30V */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW10_DVS, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW11_DVS, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW12_DVS, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW13_DVS, 0); ++ ++ /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_LOWPWR, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_LOWPWR, 0); ++ ++ /* ++ * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 --- ++ * camera for e680 ++ */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_LOWPWR, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_LOWPWR, 0); ++ ++ /* set Vc to low power mode when AP sleep */ ++// SSP_PCAP_bit_set( SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VC_STBY); ++ ++ /* set VAUX2 to voltage 2.775V and low power mode when AP sleep */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_1, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_0, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_STBY, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_LOWPWR, 1); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN, 1); ++ ++// PGSR(GPIO34_TXENB) |= GPIO_bit(GPIO34_TXENB); ++ ++ return 0; ++} ++ ++static struct pcap_platform_data e680_pcap_platform_data = { ++ .port = 1, ++ .cs = GPIO_SPI_CE, ++ .flags = PCAP_MCI_SD, ++ .clk = 1, ++ .init = e680_pcap_init, ++}; ++ ++static struct resource e680_pcap_resources[] = { ++ [0] = { ++ .start = IRQ_GPIO1, ++ .end = IRQ_GPIO1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device e680_pcap_device = { ++ .name = "ezx-pcap", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(e680_pcap_resources), ++ .resource = e680_pcap_resources, ++ .dev = { ++ .platform_data = &e680_pcap_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { ++ &e680_pcap_device, + }; + + static void __init e680_init(void) diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch index 52f9ce34b5..7a7a1be7fd 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch @@ -1,9 +1,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-06-02 20:32:49.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-02 20:33:26.000000000 -0300 -@@ -124,6 +124,27 @@ - .exit = e680_mci_exit, +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:56:21.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:58:54.000000000 -0300 +@@ -301,9 +301,34 @@ + }, }; +/* PCAP_TS */ @@ -23,17 +23,16 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c +struct platform_device pcap_ts_device = { + .name = "pcap-ts", + .id = -1, ++ .dev = { ++ .parent = &e680_pcap_device.dev, ++ }, + .num_resources = ARRAY_SIZE(pcap_ts_resources), + .resource = pcap_ts_resources, +}; + - static struct pxafb_mode_info mode_e680 = { - .pixclock = 150000, - .xres = 240, -@@ -200,6 +221,7 @@ - }; - static struct platform_device *devices[] __initdata = { + &e680_pcap_device, + &e680_emu_device, + &pcap_ts_device, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch new file mode 100644 index 0000000000..4b1f39b7d2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch @@ -0,0 +1,1179 @@ +Index: linux-2.6.21/sound/soc/codecs/pcap2.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21/sound/soc/codecs/pcap2.c 2007-08-04 22:20:36.000000000 -0300 +@@ -0,0 +1,709 @@ ++/* ++ * pcap2.c -- Template Codec Audio driver ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/pm.h> ++#include <linux/platform_device.h> ++#include <sound/driver.h> ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/pcm_params.h> ++#include <sound/soc.h> ++#include <sound/soc-dapm.h> ++#include <sound/initval.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx-pcap.h> ++#include <asm/arch/ezx.h> ++#include <asm/arch/hardware.h> ++ ++#include "pcap2.h" ++ ++#define AUDIO_NAME "pcap2-codec" ++#define PCAP2_VERSION "0.1" ++ ++extern int ezx_pcap_write(u_int8_t, u_int32_t); ++extern int ezx_pcap_read(u_int8_t, u_int32_t *); ++ ++/* ++ * Debug ++ */ ++ ++#define PCAP2_DEBUG 1 ++ ++#ifdef PCAP2_DEBUG ++#define dbg(format, arg...) \ ++ printk(KERN_DEBUG AUDIO_NAME ": " format "\n" , ## arg) ++#else ++#define dbg(format, arg...) do {} while (0) ++#endif ++ ++#define err(format, arg...) \ ++ printk(KERN_ERR AUDIO_NAME ": " format "\n" , ## arg) ++#define info(format, arg...) \ ++ printk(KERN_INFO AUDIO_NAME ": " format "\n" , ## arg) ++#define warn(format, arg...) \ ++ printk(KERN_WARNING AUDIO_NAME ": " format "\n" , ## arg) ++ ++#define dump_registers() pcap2_codec_read(NULL, 13); \ ++ pcap2_codec_read(NULL, 12); \ ++ pcap2_codec_read(NULL, 11); \ ++ pcap2_codec_read(NULL, 26); ++ ++ ++ ++ ++/* ++ * write to the pcap2 codec register space ++ */ ++static int pcap2_codec_write(struct snd_soc_codec *codec, unsigned int reg, ++ unsigned int value) ++{ ++ dbg("codec_write reg=%08x, val=%08x", reg, value); ++ ezx_pcap_write(reg, value); ++ return 0; ++ ++} ++ ++static unsigned int pcap2_codec_read(struct snd_soc_codec *codec, unsigned int reg) ++{ ++ unsigned int ret; ++ ++ ezx_pcap_read(reg, &ret); ++ dbg("codec_read reg=%08x, val=%08x", reg, ret); ++ return(ret); ++ ++} ++ ++static const char *pcap2_amp_output[] = {"R L Stereo", "RL", "RL3db", "RL6db"}; ++ ++static const struct soc_enum pcap2_enum[] = { ++SOC_ENUM_SINGLE(PCAP2_OUTPUT_AMP, 19, 4, pcap2_amp_output), ++ ++}; ++ ++/* pcap2 codec non DAPM controls */ ++static const struct snd_kcontrol_new pcap2_codec_snd_controls[] = { ++SOC_SINGLE("Output gain", PCAP2_OUTPUT_AMP, 13, 15, 0), ++SOC_SINGLE("Input gain", PCAP2_INPUT_AMP, 0, 31, 0), ++SOC_SINGLE("louderspeaker sw", PCAP2_OUTPUT_AMP, 1, 1, 0), ++SOC_SINGLE("Earpiece switch", PCAP2_OUTPUT_AMP, 0, 1, 0), ++SOC_SINGLE("Earpctrl switch", PCAP2_OUTPUT_AMP, 17, 1, 0), ++SOC_SINGLE("Aright switch", PCAP2_OUTPUT_AMP, 5, 1, 0), ++SOC_SINGLE("Aleft switch", PCAP2_OUTPUT_AMP, 6, 1, 0), ++//SOC_SINGLE("AHS switch", PCAP2_INPUT_AMP, 14, 1, 0), ++//SOC_SINGLE("pga in switch", PCAP2_OUTPUT_AMP, 10, 1, 0), ++SOC_ENUM("Output mode", pcap2_enum[0]), ++}; ++ ++/* add non dapm controls */ ++static int pcap2_codec_add_controls(struct snd_soc_codec *codec) ++{ ++ int err, i; ++ dbg("pcap2_codec_add_controls"); ++ ++ for (i = 0; i < ARRAY_SIZE(pcap2_codec_snd_controls); i++) { ++ if ((err = snd_ctl_add(codec->card, ++ snd_soc_cnew(&pcap2_codec_snd_controls[i],codec, NULL))) < 0) ++ return err; ++ } ++ ++ return 0; ++} ++ ++/* pcap2 codec DAPM controls */ ++static const struct snd_soc_dapm_widget pcap2_codec_dapm_widgets[] = { ++}; ++ ++/* ++ * template codec audio interconnectiosn between sink and source. ++ */ ++static const char *audio_map[][3] = { ++ ++ ++ /* terminator */ ++ {NULL, NULL, NULL}, ++}; ++ ++static int pcap2_codec_add_widgets(struct snd_soc_codec *codec) ++{ ++ int i; ++ dbg("pcap2_codec_add_widgets"); ++ ++ for(i = 0; i < ARRAY_SIZE(pcap2_codec_dapm_widgets); i++) { ++ snd_soc_dapm_new_control(codec, &pcap2_codec_dapm_widgets[i]); ++ } ++ ++ /* set up audio path interconnects */ ++ for(i = 0; audio_map[i][0] != NULL; i++) { ++ snd_soc_dapm_connect_input(codec, audio_map[i][0], ++ audio_map[i][1], audio_map[i][2]); ++ } ++ ++ snd_soc_dapm_new_widgets(codec); ++ return 0; ++} ++ ++/* ++ * Alsa operations ++ * Only implement the required operations for your platform. ++ * These operations are specific to the codec only. ++ */ ++ ++ /* ++ * Called by ALSA when a PCM substream is opened, private data can be allocated. ++ */ ++static int pcap2mono_codec_startup(struct snd_pcm_substream *substream) ++{ ++ dbg("pcap2 codec startup"); ++ ++ return 0; ++} ++ ++/* ++ * Called by ALSA when a PCM substream is closed. Private data can be ++ * freed here. ++ */ ++static int pcap2mono_codec_shutdown(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_device *socdev = rtd->socdev; ++ struct snd_soc_codec *codec = socdev->codec; ++ ++ dbg("pcap2mono codec shutdown"); ++ ++ pcap2_codec_write(codec, PCAP2_CODEC, 0); ++ return 0; ++} ++ ++/* ++ * Called by ALSA when the hardware params are set by application. This ++ * function can also be called multiple times and can allocate buffers ++ * (using snd_pcm_lib_* ). It's non-atomic. ++ */ ++static int pcap2mono_codec_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++// u_int32_t tmp; ++ dbg("pcap2mono_codec_hw_params"); ++ ++ return 0; ++} ++ ++/* ++ * Free's resources allocated by hw_params, can be called multiple times ++ */ ++static int pcap2mono_codec_hw_free(struct snd_pcm_substream *substream) ++{ ++ dbg("pcap2mono_codec_hw_free"); ++ return 0; ++} ++ ++static int pcap2_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, ++ int clk_id, unsigned int freq, int dir) ++{ ++ ++ dbg("pcap2 set dai sysclk"); ++ return 0; ++} ++ ++static int pcap2_set_dai_pll(struct snd_soc_codec_dai *codec_dai, ++ int pll_id, unsigned int freq_in, unsigned int freq_out) ++{ ++ struct snd_soc_codec *codec = codec_dai->codec; ++ u_int32_t tmp; ++ ++ dbg("pcap2 set dai pll"); ++ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ /* ST_DAC */ ++ dbg("stereo codec not supported yet."); ++ return -ENODEV; ++ } ++ else { ++ /* MONO_DAC */ ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); ++ ++ tmp &= ~0x10000; ++ switch (pll_id) { ++ case PCAP2_PLL_AP: ++ tmp |= 0x10000; ++ break; ++ case PCAP2_PLL_BP: ++ break; ++ default: ++ return -ENODEV; ++ } ++ ++ tmp &= ~0x1c0; ++ switch (freq_in) { ++ case 13000000: ++ break; ++/* case 15M36: ++ tmp |= 0x40; ++ break; ++ case 16M8: ++ tmp |= 0x80; ++ break; ++ case 19M44: ++ tmp |= 0xc0; ++ break; ++*/ case 26000000: ++ tmp |= 0x100; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++ return 0; ++} ++ ++static int pcap2_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, ++ unsigned int fmt) ++{ ++ struct snd_soc_codec *codec = codec_dai->codec; ++ u_int32_t tmp = 0; ++ ++ dbg("pcap2_set_dai_fmt"); ++ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ /* ST_DAC */ ++ dbg("stereo codec not supported yet."); ++ return -ENODEV; ++ } ++ else { ++ /* MONO_DAC */ ++ ++ /* disable ST_DAC */ ++ pcap2_codec_write(codec, PCAP2_ST_DAC, 0); ++ ++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { ++ case SND_SOC_DAIFMT_CBM_CFM: ++ break; ++ case SND_SOC_DAIFMT_CBS_CFS: ++ tmp |= 0x2; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { ++ case SND_SOC_DAIFMT_I2S: ++ tmp |= 0x4000; ++ break; ++/* case SND_SOC_NET: ++ tmp |= 0x2000; ++ break; ++*/ case SND_SOC_DAIFMT_DSP_B: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { ++ case SND_SOC_DAIFMT_IB_IF: ++ break; ++ case SND_SOC_DAIFMT_NB_NF: ++ tmp |= 0x600; ++ break; ++ case SND_SOC_DAIFMT_IB_NF: ++ tmp |= 0x400; ++ break; ++ case SND_SOC_DAIFMT_NB_IF: ++ tmp |= 0x200; ++ break; ++ } ++ if (codec_dai->id == PCAP2_MONO_DAI) ++ /* set dai to AP */ ++ tmp |= 0x8000; ++ ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++ return 0; ++} ++ ++ ++#if 0 ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A1_CONFIG, 1); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AHS_CONFIG, 1); ++ ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ST_DAC_ST_CLK_EN, 0); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ST_DAC_ST_DAC_EN, 0); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ST_DAC_SMB_ST_DAC,1); ++ ++// dbg ("configure pcap to use ap clock"); ++// OSCC |= 0x00000008; ++// pxa_gpio_mode(AP_13MHZ_OUTPUT_PIN | GPIO_ALT_FN_3_OUT); ++ ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CLK_IN_SEL, 1); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ST_DAC_ST_DAC_CLK_IN_SEL, 1); ++ ++ ++ ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); ++ ++ ++ ++ ++ /* configure bitclk, pllclock, mode */ ++ ezx_pcap_write(PCAP2_ST_DAC, 0); ++ ++ tmp = PCAP_CDC_CLK_IN_13M0; ++ ezx_pcap_write(PCAP2_CODEC, tmp); ++ ++ /* codec 0=master 1=slave */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_SMB, 0); ++ ++ /* bitrate 0=8k 1=16k */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_FS_8K_16K, 0); ++ ++ /* clock source */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CLK_IN_SEL,1); ++ ++ /* dai select 0=neptune 1=pxa */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_DIG_AUD_IN,1); ++ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_AUDIHPF,1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_AUDOHPF,1); ++ ++ /* clock/frame inv */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CLK_INV,0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_FS_INV,0); ++ ++ /*(3) reset digital filter(DF_RESET=1) */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_DF_RESET,1); ++ ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_ADITH,0); ++ ++ /* (4) enable pcap clk(CDC_CLK_EN=1),enable CODEC(CDC_EN=1) */ ++ ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_CD_BYP,0); ++ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_CLK_EN,1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_EN,1); ++ mdelay(1); ++ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_ST_DAC_SW, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_CDC_SW, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_IN_SW, 0); ++ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_R_EN, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_L_EN, 0); ++ ++ /* set default output to louderspeaker while developing */ ++ ezx_pcap_read(SSP_PCAP_ADJ_AUD_RX_AMPS_REGISTER, &tmp); ++ tmp &= ~SSP_PCAP_MONO_PGA_MASK; ++ tmp |= PCAP_MONO_PGA_RL; ++ ezx_pcap_write(SSP_PCAP_ADJ_AUD_RX_AMPS_REGISTER, tmp); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1CTRL, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A2_EN, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A2_CONFIG, 1); ++ ++ /* set default input to handset while developing */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_MB_ON1, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A5_EN, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A5_MUX, 1); ++ ++ ++ ++ dump_registers(); ++ ++ ++ return 0; ++} ++ ++#endif ++ ++/* ++ * Starts (Triggers) audio playback or capture. ++ * Usually only needed for DMA ++ */ ++static int pcap2mono_codec_trigger(struct snd_pcm_substream *substream, int cmd) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_device *socdev = rtd->socdev; ++ struct snd_soc_codec *codec = socdev->codec; ++ u_int32_t tmp; ++ ++ dbg("pcap2mono_codec_trigger"); ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); ++ ++ ++ /* reset digital filter */ ++ tmp |= 0x800; ++ ++ /* enable codec */ ++ tmp |= 0x1000; ++ ++ /* enable codec clock */ ++ tmp |= 0x2000; ++ ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ ++ dump_registers(); ++ return 0; ++} ++ ++/* ++ * Called by ALSA when the PCM substream is prepared, can set format, sample ++ * rate, etc. This function is non atomic and can be called multiple times, ++ * it can refer to the runtime info. ++ */ ++static int pcap2mono_codec_prepare(struct snd_pcm_substream *substream) ++{ ++ dbg("pcap2mono_codec_prepare"); ++ return 0; ++} ++ ++/* ++ * Codec DAPM event handler ++ * This handles codec level DAPM events ++ */ ++static int pcap2_codec_dapm_event(struct snd_soc_codec *codec, int event) ++{ ++ switch (event) { ++ case SNDRV_CTL_POWER_D0: /* full On */ ++ /* e.g. vref/mid, osc on, */ ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIO_LOWPWR, 0); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); ++ break; ++ case SNDRV_CTL_POWER_D1: /* partial On */ ++ case SNDRV_CTL_POWER_D2: /* partial On */ ++ break; ++ case SNDRV_CTL_POWER_D3hot: /* Off, with power */ ++ /* everything off except vref/vmid, */ ++ dbg("power on pcap codec"); ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIO_LOWPWR, 0); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); ++// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); ++ break; ++ case SNDRV_CTL_POWER_D3cold: /* Off, without power */ ++ /* everything off, dac mute, inactive */ ++ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIO_LOWPWR, 1); ++ break; ++ } ++ codec->dapm_state = event; ++ return 0; ++} ++ ++/* ++ * Define codec DAI. ++ */ ++struct snd_soc_codec_dai pcap2_dai[] = { ++{ ++ .name = "PCAP2 MONO", ++ .id = 0, ++ /* playback and capture stream info */ ++ .playback = { ++ .stream_name = "mono playback", ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .capture = { ++ .stream_name = "mono capture", ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ /* codec operations */ ++ /* alsa PCM operations */ ++ .ops = { ++ .startup = pcap2mono_codec_startup, ++ .shutdown = pcap2mono_codec_shutdown, ++ .prepare = pcap2mono_codec_prepare, ++ .trigger = pcap2mono_codec_trigger, ++ .hw_params = pcap2mono_codec_hw_params, ++ .hw_free = pcap2mono_codec_hw_free,}, ++ .dai_ops = { ++// .digital_mute = pcap2_mute, ++ .set_fmt = pcap2_set_dai_fmt, ++// .set_clkdiv = pcap2_set_dai_clkdiv, ++ .set_pll = pcap2_set_dai_pll, ++ .set_sysclk = pcap2_set_dai_sysclk, ++ }, ++}, ++{ ++ .name = "PCAP2 STEREO", ++ .id = 1, ++ .playback = { ++ .stream_name = "stereo playback", ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_44100), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .ops = { ++// .startup = pcap2stereo_codec_startup, ++// .shutdown = pcap2stereo_codec_shutdown, ++// .prepare = pcap2stereo_codec_prepare, ++// .trigger = pcap2stereo_codec_trigger, ++// .hw_params = pcap2stereo_codec_hw_params, ++// .hw_free = pcap2stereo_codec_hw_free, ++ }, ++ .dai_ops = { ++// .digital_mute = pcap2_mute, ++ .set_fmt = pcap2_set_dai_fmt, ++// .set_clkdiv = pcap2_set_dai_clkdiv, ++ .set_pll = pcap2_set_dai_pll, ++ .set_sysclk = pcap2_set_dai_sysclk, ++ }, ++}, ++{ ++ .name = "PCAP2 BP", ++ .id = 2, ++ .playback = { ++ .stream_name = "baseband playback", ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = SNDRV_PCM_RATE_8000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .ops = { ++ .startup = pcap2mono_codec_startup, ++// .shutdown = pcap2mono_codec_shutdown, ++ .prepare = pcap2mono_codec_prepare, ++ .trigger = pcap2mono_codec_trigger, ++ .hw_params = pcap2mono_codec_hw_params, ++ .hw_free = pcap2mono_codec_hw_free, ++ }, ++ .dai_ops = { ++// .digital_mute = pcap2_mute, ++ .set_fmt = pcap2_set_dai_fmt, ++// .set_clkdiv = pcap2_set_dai_clkdiv, ++ .set_pll = pcap2_set_dai_pll, ++ .set_sysclk = pcap2_set_dai_sysclk, ++ }, ++}, ++}; ++EXPORT_SYMBOL_GPL(pcap2_dai); ++ ++static int pcap2_codec_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct snd_soc_device *socdev = platform_get_drvdata(pdev); ++ struct snd_soc_codec *codec = socdev->codec; ++ ++ dbg("pcap2_codec_suspend"); ++ pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3cold); ++ return 0; ++} ++ ++static int pcap2_codec_resume(struct platform_device *pdev) ++{ ++ struct snd_soc_device *socdev = platform_get_drvdata(pdev); ++ struct snd_soc_codec *codec = socdev->codec; ++ ++ dbg("pcap2_codec_resume"); ++ pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3hot); ++ pcap2_codec_dapm_event(codec, codec->suspend_dapm_state); ++ return 0; ++} ++ ++/* ++ * initialise the PCAP2 driver ++ * register the mixer and dsp interfaces with the kernel ++ */ ++static int pcap2_codec_init(struct snd_soc_device *socdev) ++{ ++ struct snd_soc_codec *codec = socdev->codec; ++ int reg, ret = 0; ++ ++ dbg("pcap2_codec_init"); ++ codec->name = "PCAP2 Audio"; ++ codec->owner = THIS_MODULE; ++ codec->read = pcap2_codec_read; ++ codec->write = pcap2_codec_write; ++ codec->dapm_event = pcap2_codec_dapm_event; ++ codec->dai = pcap2_dai; ++ codec->num_dai = ARRAY_SIZE(pcap2_dai); ++ ++ /* register pcms */ ++ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); ++ if (ret < 0) { ++ return ret; ++ } ++ /* power on device */ ++ pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3hot); ++ /* set the update bits */ ++ ++ pcap2_codec_add_controls(codec); ++ pcap2_codec_add_widgets(codec); ++ ret = snd_soc_register_card(socdev); ++ if (ret < 0) { ++ snd_soc_free_pcms(socdev); ++ snd_soc_dapm_free(socdev); ++ dbg("erro registrando\n"); ++ } ++ ++ return ret; ++} ++ ++static struct snd_soc_device *pcap2_codec_socdev; ++ ++ ++static int pcap2_codec_probe(struct platform_device *pdev) ++{ ++ struct snd_soc_device *socdev = platform_get_drvdata(pdev); ++ struct pcap2_codec_setup_data *setup; ++ struct snd_soc_codec *codec; ++ int ret = 0; ++ info("PCAP2 Audio Codec %s", PCAP2_VERSION); ++ ++ setup = socdev->codec_data; ++ codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); ++ if (codec == NULL) ++ return -ENOMEM; ++ ++ socdev->codec = codec; ++ mutex_init(&codec->mutex); ++ INIT_LIST_HEAD(&codec->dapm_widgets); ++ INIT_LIST_HEAD(&codec->dapm_paths); ++ ++ pcap2_codec_socdev = socdev; ++ ++ ret = pcap2_codec_init(socdev); ++ return ret; ++} ++ ++/* power down chip and remove */ ++static int pcap2_codec_remove(struct platform_device *pdev) ++{ ++ struct snd_soc_device *socdev = platform_get_drvdata(pdev); ++ struct snd_soc_codec *codec = socdev->codec; ++ if (codec->control_data) ++ pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3cold); ++ snd_soc_free_pcms(socdev); ++ snd_soc_dapm_free(socdev); ++ ++ kfree(codec); ++ ++ return 0; ++} ++ ++/* codec device ops */ ++struct snd_soc_codec_device soc_codec_dev_pcap2 = { ++ .probe = pcap2_codec_probe, ++ .remove = pcap2_codec_remove, ++// .suspend = pcap2_codec_suspend, ++// .resume = pcap2_codec_resume, ++}; ++ ++EXPORT_SYMBOL_GPL(soc_codec_dev_pcap2); ++ ++MODULE_DESCRIPTION("ASoC PCAP2 codec"); ++MODULE_AUTHOR("Daniel Ribeiro"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.21/sound/soc/codecs/pcap2.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21/sound/soc/codecs/pcap2.h 2007-08-04 02:06:01.000000000 -0300 +@@ -0,0 +1,31 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _PCAP2_H ++#define _PCAP2_H ++ ++/* PCAP2 register space */ ++ ++#define PCAP2_OUTPUT_AMP 0x0c ++#define PCAP2_ST_DAC 0x0d ++#define PCAP2_INPUT_AMP 0x1a ++#define PCAP2_CODEC 0x0b ++ ++#define PCAP2_MONO_DAI 0 ++#define PCAP2_STEREO_DAI 1 ++#define PCAP2_BP_DAI 2 ++ ++#define PCAP2_PLL_BP 0 ++#define PCAP2_PLL_AP 1 ++ ++//struct template_codec_setup_data { ++// unsigned short i2c_address; ++//}; ++ ++extern struct snd_soc_codec_dai pcap2_dai[]; ++extern struct snd_soc_codec_device soc_codec_dev_pcap2; ++ ++#endif +Index: linux-2.6.21/sound/soc/pxa/Kconfig +=================================================================== +--- linux-2.6.21.orig/sound/soc/pxa/Kconfig 2007-08-02 22:58:17.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/Kconfig 2007-08-02 22:58:34.000000000 -0300 +@@ -60,4 +60,13 @@ + Say Y if you want to add support for SoC audio on Sharp + Zaurus SL-C6000x models (Tosa). + ++config SND_PXA2XX_SOC_EZX ++ tristate "SoC Audio support for EZX" ++ depends on SND_PXA2XX_SOC && PXA_EZX ++ select SND_PXA2XX_SOC_SSP ++ select SND_SOC_PCAP2 ++ help ++ Say Y if you want to add support for SoC audio on ++ Motorola EZX Phones (a780/e680). ++ + endmenu +Index: linux-2.6.21/sound/soc/pxa/ezx.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21/sound/soc/pxa/ezx.c 2007-08-04 22:35:25.000000000 -0300 +@@ -0,0 +1,296 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/timer.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <sound/driver.h> ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/soc.h> ++#include <sound/soc-dapm.h> ++ ++#include <asm/mach-types.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/hardware.h> ++ ++#include "../codecs/pcap2.h" ++#include "pxa2xx-pcm.h" ++#include "pxa2xx-ssp.h" ++ ++#define GPIO_HW_ATTENUATE_A780 96 ++/* ++ * Alsa operations ++ * Only implement the required operations for your platform. ++ * These operations are specific to the machine only. ++ */ ++ ++ /* ++ * Called by ALSA when a PCM substream is opened, private data can be allocated. ++ */ ++static int ezx_machine_startup(struct snd_pcm_substream *substream) ++{ ++ printk("ezx_machine_startup\n"); ++ return 0; ++} ++ ++/* ++ * Called by ALSA when the hardware params are set by application. This ++ * function can also be called multiple times and can allocate buffers ++ * (using snd_pcm_lib_* ). It's non-atomic. ++ */ ++static int ezx_machine_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ int ret; ++ ++ ++ /* set codec DAI configuration */ ++ ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++ if(ret < 0) ++ return ret; ++ ++ /* set PLL source */ ++ ret = codec_dai->dai_ops.set_pll(codec_dai, PCAP2_PLL_AP, 13000000, -1); ++ if(ret < 0) ++ return ret; ++ ++ /* set cpu DAI configuration */ ++ ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++ if (ret < 0) ++ return ret; ++ ++ ret = cpu_dai->dai_ops.set_tristate(cpu_dai, 0); ++ if (ret < 0) ++ return ret; ++ ++ ret = cpu_dai->dai_ops.set_sysclk(cpu_dai,PXA2XX_SSP_CLK_PLL, 0, SND_SOC_CLOCK_IN); ++ if (ret < 0) ++ return ret; ++ ++ return 0; ++} ++ ++/* ++ * Free's resources allocated by hw_params, can be called multiple times ++ */ ++static int ezx_machine_hw_free(struct snd_pcm_substream *substream) ++{ ++ ++ printk("ezx_machine_hw_free\n"); ++ ++ return 0; ++} ++ ++static int ezx_machine_prepare(struct snd_pcm_substream *substream) ++{ ++ int timeout = 0; ++ while(((SSSR_P(3) & SSSR_CSS) != 0) && (timeout++ < 10000000)); ++ ++ if (timeout >= 10000000) ++ printk("clock sync timeout!\n"); ++ else ++ printk("clock sync passed %d\n", timeout); ++ ++// printk("SSCR0 %x SSCR1 %x SSTO %x SSPSP %x SSSR %x SSACD %x\n", ++// SSCR0_P(3), SSCR1_P(3), ++// SSTO_P(3), SSPSP_P(3), ++// SSSR_P(3), SSACD_P(3)); ++ return 0; ++} ++ ++/* machine Alsa PCM operations */ ++static struct snd_soc_ops ezx_ops = { ++ .startup = ezx_machine_startup, ++ .prepare = ezx_machine_prepare, ++ .hw_free = ezx_machine_hw_free, ++ .hw_params = ezx_machine_hw_params, ++}; ++ ++static int bp_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ int ret; ++ printk("bp_hw_params\n"); ++ /* set codec DAI configuration */ ++ ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++ if(ret < 0) ++ return ret; ++ ++ /* set PLL source */ ++ ret = codec_dai->dai_ops.set_pll(codec_dai, PCAP2_PLL_BP, 13000000, -1); ++ if(ret < 0) ++ return ret; ++ ++ /* set cpu DAI configuration */ ++// ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B | ++// SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++// if (ret < 0) ++// return ret; ++ ++// ret = cpu_dai->dai_ops.set_tristate(cpu_dai, 0); ++// if (ret < 0) ++// return ret; ++ ++// ret = cpu_dai->dai_ops.set_sysclk(cpu_dai,PXA2XX_SSP_CLK_PLL, 0, SND_SOC_CLOCK_IN); ++// if (ret < 0) ++// return ret; ++ ++ return 0; ++} ++ ++/* machine audio map (connections to the codec pins) */ ++static const char *audio_map[][3] = { ++ ++ {NULL, NULL, NULL}, ++}; ++ ++/* ++ * Initialise the machine audio subsystem. ++ */ ++static int ezx_machine_init(struct snd_soc_codec *codec) ++{ ++ printk("ezx machine init\n"); ++ /* mark unused codec pins as NC */ ++ ++ /* Add template specific controls */ ++ ++ /* Add template specific widgets */ ++ ++ /* Set up template specific audio path audio_map */ ++ /* synchronise subsystem */ ++ snd_soc_dapm_sync_endpoints(codec); ++ return 0; ++} ++ ++static struct snd_soc_cpu_dai bp_dai = ++{ ++ .name = "Baseband", ++ .id = 0, ++ .type = SND_SOC_DAI_PCM, ++ .playback = { ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = SNDRV_PCM_RATE_8000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .capture = { ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = SNDRV_PCM_RATE_8000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .ops = { ++// .startup = bp_startup, ++// .shutdown = bp_shutdown, ++ .hw_params = bp_hw_params, ++// .hw_free = bp_hw_free, ++ }, ++}; ++ ++/* template digital audio interface glue - connects codec <--> CPU */ ++static struct snd_soc_dai_link ezx_dai[] = { ++{ ++ .name = "PCAP2 MONO", ++ .stream_name = "mono playback", ++ .cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3], ++ .codec_dai = &pcap2_dai[PCAP2_MONO_DAI], ++ .init = ezx_machine_init, ++ .ops = &ezx_ops, ++}, ++{ ++ .name = "PCAP2 STEREO", ++ .stream_name = "stereo playback", ++ .cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3], ++ .codec_dai = &pcap2_dai[PCAP2_STEREO_DAI], ++ .init = ezx_machine_init, ++ .ops = &ezx_ops, ++}, ++{ ++ .name = "PCAP2 BP", ++ .stream_name = "BP Audio", ++ .cpu_dai = &bp_dai, ++ .codec_dai = &pcap2_dai[PCAP2_BP_DAI], ++}, ++}; ++ ++/* template audio machine driver */ ++static struct snd_soc_machine snd_soc_machine_ezx = { ++ .name = "Motorola EZX", ++// .probe ++// .remove ++// .suspend_pre ++// .resume_post ++ .dai_link = ezx_dai, ++ .num_links = ARRAY_SIZE(ezx_dai), ++}; ++ ++/* template audio private data */ ++//static struct codec_priv_setup_data template_codec_setup = { ++// .i2c_address = 0x1b, ++//}; ++ ++/* template audio subsystem */ ++static struct snd_soc_device ezx_snd_devdata = { ++ .machine = &snd_soc_machine_ezx, ++ .platform = &pxa2xx_soc_platform, ++ .codec_dev = &soc_codec_dev_pcap2, ++// .codec_data = &ezx_pcap2_setup, ++}; ++ ++static struct platform_device *ezx_snd_device; ++ ++static int __init ezx_init(void) ++{ ++ int ret; ++ printk("soc: ezx_init entered\n"); ++ ezx_snd_device = platform_device_alloc("soc-audio", -1); ++ if (!ezx_snd_device) ++ return -ENOMEM; ++ ++ platform_set_drvdata(ezx_snd_device, &ezx_snd_devdata); ++ ezx_snd_devdata.dev = &ezx_snd_device->dev; ++ ret = platform_device_add(ezx_snd_device); ++ ++ if (ret) ++ platform_device_put(ezx_snd_device); ++ ++ pxa_gpio_mode(GPIO83_SFRM3_MD); /* SFRM */ ++ pxa_gpio_mode(GPIO81_STXD3_MD); /* TXD */ ++ pxa_gpio_mode(52 | GPIO_ALT_FN_2_IN); /* SCLK */ ++ pxa_gpio_mode(GPIO89_SRXD3_MD); /* RXD */ ++ ++ ++ pxa_gpio_mode(GPIO_HW_ATTENUATE_A780 | GPIO_OUT); ++ pxa_gpio_set_value(GPIO_HW_ATTENUATE_A780, 1); ++ ++ ++ ++ ++ return ret; ++} ++ ++static void __exit ezx_exit(void) ++{ ++ platform_device_unregister(ezx_snd_device); ++} ++ ++module_init(ezx_init); ++module_exit(ezx_exit); ++ +Index: linux-2.6.21/sound/soc/codecs/Makefile +=================================================================== +--- linux-2.6.21.orig/sound/soc/codecs/Makefile 2007-08-02 22:57:48.000000000 -0300 ++++ linux-2.6.21/sound/soc/codecs/Makefile 2007-08-02 22:58:34.000000000 -0300 +@@ -2,8 +2,10 @@ + snd-soc-wm8731-objs := wm8731.o + snd-soc-wm8750-objs := wm8750.o + snd-soc-wm9712-objs := wm9712.o ++snd-soc-pcap2-objs := pcap2.o + + obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o + obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o + obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o + obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o ++obj-$(CONFIG_SND_SOC_PCAP2) += snd-soc-pcap2.o +Index: linux-2.6.21/sound/soc/codecs/Kconfig +=================================================================== +--- linux-2.6.21.orig/sound/soc/codecs/Kconfig 2007-08-02 22:57:48.000000000 -0300 ++++ linux-2.6.21/sound/soc/codecs/Kconfig 2007-08-02 22:58:34.000000000 -0300 +@@ -13,3 +13,7 @@ + config SND_SOC_WM9712 + tristate + depends on SND_SOC ++ ++config SND_SOC_PCAP2 ++ tristate ++ depends on SND_SOC && EZX_PCAP +Index: linux-2.6.21/sound/soc/pxa/Makefile +=================================================================== +--- linux-2.6.21.orig/sound/soc/pxa/Makefile 2007-08-02 22:58:17.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/Makefile 2007-08-02 22:58:34.000000000 -0300 +@@ -14,9 +14,10 @@ + snd-soc-poodle-objs := poodle.o + snd-soc-tosa-objs := tosa.o + snd-soc-spitz-objs := spitz.o ++snd-soc-ezx-objs := ezx.o + + obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o + obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o + obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o + obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o +- ++obj-$(CONFIG_SND_PXA2XX_SOC_EZX) += snd-soc-ezx.o +Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c +=================================================================== +--- linux-2.6.21.orig/sound/soc/pxa/pxa2xx-ssp.c 2007-08-02 22:58:17.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c 2007-08-02 22:58:34.000000000 -0300 +@@ -440,6 +440,12 @@ + case SND_SOC_DAIFMT_NB_NF: + SSPSP_P(port) |= SSPSP_SFRMP | SSPSP_FSRT; + break; ++ case SND_SOC_DAIFMT_NB_IF: ++ SSPSP_P(port) |= SSPSP_FSRT; ++ break; ++ case SND_SOC_DAIFMT_IB_NF: ++ SSPSP_P(port) |= SSPSP_SFRMP; ++ break; + case SND_SOC_DAIFMT_IB_IF: + break; + default: +Index: linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c +=================================================================== +--- linux-2.6.21.orig/sound/soc/pxa/pxa2xx-pcm.c 2007-08-02 22:57:48.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c 2007-08-04 22:46:02.000000000 -0300 +@@ -61,8 +61,9 @@ + + dcsr = DCSR(dma_ch); + DCSR(dma_ch) = dcsr & ~DCSR_STOPIRQEN; +- ++ printk("dma irq dcsr=%08x ", dcsr); + if (dcsr & DCSR_ENDINTR) { ++ printk("endintr\n"); + snd_pcm_period_elapsed(substream); + } else { + printk( KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n", +@@ -106,7 +107,8 @@ + return ret; + prtd->dma_ch = ret; + } +- ++ printk("requested dma channel %d\n", ret); ++ + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = totsize; + +@@ -153,11 +155,13 @@ + static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream) + { + struct pxa2xx_runtime_data *prtd = substream->runtime->private_data; +- ++ printk("pcm_prepare channel %d\n", prtd->dma_ch); + DCSR(prtd->dma_ch) &= ~DCSR_RUN; + DCSR(prtd->dma_ch) = 0; + DCMD(prtd->dma_ch) = 0; +- *prtd->params->drcmr = prtd->dma_ch | DRCMR_MAPVLD; ++ ++ if (prtd->params) ++ *prtd->params->drcmr = prtd->dma_ch | DRCMR_MAPVLD; + + return 0; + } +@@ -190,7 +194,7 @@ + default: + ret = -EINVAL; + } +- ++ printk("pcm_trigger ret%d, cmd%d\n", ret, cmd); + return ret; + } + diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-backlight.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-backlight.patch index 7054ef549b..c0284e3a1f 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-backlight.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-backlight.patch @@ -5,8 +5,8 @@ Index: linux-2.6.21/drivers/video/backlight/Kconfig =================================================================== ---- linux-2.6.21.orig/drivers/video/backlight/Kconfig 2007-06-02 20:03:06.000000000 -0300 -+++ linux-2.6.21/drivers/video/backlight/Kconfig 2007-06-02 20:26:49.000000000 -0300 +--- linux-2.6.21.orig/drivers/video/backlight/Kconfig 2007-08-01 19:38:48.000000000 -0300 ++++ linux-2.6.21/drivers/video/backlight/Kconfig 2007-08-01 20:00:56.000000000 -0300 @@ -63,3 +63,12 @@ help If you have a Frontpath ProGear say Y to enable the @@ -22,8 +22,8 @@ Index: linux-2.6.21/drivers/video/backlight/Kconfig + Index: linux-2.6.21/drivers/video/backlight/Makefile =================================================================== ---- linux-2.6.21.orig/drivers/video/backlight/Makefile 2007-06-02 20:03:06.000000000 -0300 -+++ linux-2.6.21/drivers/video/backlight/Makefile 2007-06-02 20:26:49.000000000 -0300 +--- linux-2.6.21.orig/drivers/video/backlight/Makefile 2007-08-01 19:38:48.000000000 -0300 ++++ linux-2.6.21/drivers/video/backlight/Makefile 2007-08-01 20:00:56.000000000 -0300 @@ -6,3 +6,4 @@ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o @@ -32,7 +32,7 @@ Index: linux-2.6.21/drivers/video/backlight/Makefile Index: linux-2.6.21/drivers/video/backlight/ezx_bl.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/drivers/video/backlight/ezx_bl.c 2007-06-02 20:26:49.000000000 -0300 ++++ linux-2.6.21/drivers/video/backlight/ezx_bl.c 2007-08-01 20:00:56.000000000 -0300 @@ -0,0 +1,142 @@ +/* + * Backlight Driver for Motorola A780 and E680(i) GSM Phones. @@ -178,9 +178,9 @@ Index: linux-2.6.21/drivers/video/backlight/ezx_bl.c +MODULE_LICENSE("GPL"); Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-06-02 20:19:44.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-02 20:26:49.000000000 -0300 -@@ -67,6 +67,12 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-08-01 19:39:02.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-08-01 20:00:56.000000000 -0300 +@@ -65,6 +65,12 @@ #endif EXPORT_SYMBOL(ezx_backlight_power); @@ -190,13 +190,13 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c + .id = -1, +}; + - /* SSP */ - struct platform_device ezxssp_device = { - .name = "ezx-ssp", -@@ -179,6 +185,7 @@ + /* OHCI Controller */ + static int ezx_ohci_init(struct device *dev) + { +@@ -121,6 +127,7 @@ + + static struct platform_device *devices[] __initdata = { &ezxbp_device, - &ezxpcap_device, - &ezxemu_device, + &ezxbacklight_device, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch index a0b3b61b12..b0ccf4835e 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-06-02 14:46:25.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-02 20:03:12.000000000 -0300 -@@ -100,9 +100,41 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-06-28 19:44:46.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-28 19:44:52.000000000 -0300 +@@ -86,8 +86,40 @@ .init = ezx_ohci_init, }; @@ -39,15 +39,14 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c + static struct platform_device *devices[] __initdata = { - &ezxssp_device, + &ezxbp_device, }; static int __init ezx_init(void) Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-02 14:48:52.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-06-02 20:03:11.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-28 19:44:29.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-06-28 19:44:52.000000000 -0300 @@ -102,6 +102,9 @@ endchoice @@ -61,7 +60,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig Index: linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c 2007-06-02 18:26:22.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c 2007-06-28 19:44:52.000000000 -0300 @@ -0,0 +1,249 @@ +/* + * BP handshake code for Motorola EZX phones @@ -314,8 +313,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c + Index: linux-2.6.21/arch/arm/mach-pxa/Makefile =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-02 14:49:50.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-06-02 20:03:11.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-28 19:44:29.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-06-28 19:44:52.000000000 -0300 @@ -24,6 +24,7 @@ obj-$(CONFIG_PXA_EZX_E2) += ezx-e2.o obj-$(CONFIG_PXA_EZX_A1200) += ezx-a1200.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-core.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-core.patch index c0e9435723..653e814fb4 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-core.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-core.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/boot/compressed/head-xscale.S =================================================================== ---- linux-2.6.21.orig/arch/arm/boot/compressed/head-xscale.S 2007-06-02 14:46:22.000000000 -0300 -+++ linux-2.6.21/arch/arm/boot/compressed/head-xscale.S 2007-06-02 14:46:25.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/boot/compressed/head-xscale.S 2007-06-28 16:51:44.000000000 -0300 ++++ linux-2.6.21/arch/arm/boot/compressed/head-xscale.S 2007-06-28 16:51:50.000000000 -0300 @@ -53,3 +53,6 @@ str r1, [r0, #0x18] #endif @@ -11,8 +11,8 @@ Index: linux-2.6.21/arch/arm/boot/compressed/head-xscale.S +#endif Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-02 14:46:22.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-06-02 14:48:52.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-28 16:51:44.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-06-28 20:54:54.000000000 -0300 @@ -37,6 +37,10 @@ bool "Keith und Koep Trizeps4 DIMM-Module" select PXA27x @@ -68,13 +68,13 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig endif Index: linux-2.6.21/arch/arm/mach-pxa/Makefile =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-02 14:46:22.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-06-02 14:49:50.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-28 16:51:44.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-06-28 20:54:54.000000000 -0300 @@ -18,6 +18,12 @@ obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o obj-$(CONFIG_MACH_TOSA) += tosa.o -+obj-$(CONFIG_PXA_EZX) += ezx.o ezx_ssp.o ++obj-$(CONFIG_PXA_EZX) += ezx.o +obj-$(CONFIG_PXA_EZX_A780) += ezx-a780.o +obj-$(CONFIG_PXA_EZX_E680) += ezx-e680.o +obj-$(CONFIG_PXA_EZX_E2) += ezx-e2.o @@ -86,8 +86,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Makefile Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-02 14:46:25.000000000 -0300 -@@ -0,0 +1,135 @@ ++++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-28 20:54:54.000000000 -0300 +@@ -0,0 +1,118 @@ +/* + * ezx.c - Common code for EZX platform. + * @@ -108,11 +108,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c +#include <asm/arch/pxafb.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/ohci.h> ++#include <asm/arch/ezx.h> + +#include "generic.h" -+#include "ezx.h" -+ -+extern int ezx_ssp_set_machinfo(struct ezxssp_machinfo *); + +/* EZX PXA Framebuffer */ +void ezx_lcd_power(int on, struct fb_var_screeninfo *var) @@ -156,18 +154,6 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c +#endif +EXPORT_SYMBOL(ezx_backlight_power); + -+/* SSP */ -+struct platform_device ezxssp_device = { -+ .name = "ezx-ssp", -+ .id = -1, -+}; -+ -+struct ezxssp_machinfo ezx_ssp_machinfo = { -+ .port = 1, -+ .cs_pcap = GPIO_SPI_CE, -+ .clk_pcap = 1, -+}; -+ +/* OHCI Controller */ +static int ezx_ohci_init(struct device *dev) +{ @@ -192,15 +178,12 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c + + +static struct platform_device *devices[] __initdata = { -+ &ezxssp_device, +}; + +static int __init ezx_init(void) +{ + CKEN = CKEN9_OSTIMER | CKEN22_MEMC; + -+ ezx_ssp_set_machinfo(&ezx_ssp_machinfo); -+ + pxa_gpio_mode(GPIO_ICL_FFRXD_MD); + pxa_gpio_mode(GPIO_ICL_FFTXD_MD); + pxa_gpio_mode(GPIO_ICL_FFCTS_MD); @@ -226,7 +209,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c Index: linux-2.6.21/include/asm-arm/arch-pxa/ezx.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/include/asm-arm/arch-pxa/ezx.h 2007-06-02 14:46:25.000000000 -0300 ++++ linux-2.6.21/include/asm-arm/arch-pxa/ezx.h 2007-06-28 16:51:50.000000000 -0300 @@ -0,0 +1,225 @@ +/* + * linux/include/asm-arm/arch-pxa/ezx.h @@ -455,8 +438,8 @@ Index: linux-2.6.21/include/asm-arm/arch-pxa/ezx.h + Index: linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h =================================================================== ---- linux-2.6.21.orig/include/asm-arm/arch-pxa/pxa-regs.h 2007-06-02 14:46:22.000000000 -0300 -+++ linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h 2007-06-02 14:46:25.000000000 -0300 +--- linux-2.6.21.orig/include/asm-arm/arch-pxa/pxa-regs.h 2007-06-28 16:51:44.000000000 -0300 ++++ linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h 2007-06-28 18:18:49.000000000 -0300 @@ -849,6 +849,8 @@ #define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ #define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ @@ -572,8 +555,8 @@ Index: linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ Index: linux-2.6.21/arch/arm/boot/compressed/head.S =================================================================== ---- linux-2.6.21.orig/arch/arm/boot/compressed/head.S 2007-06-02 14:46:22.000000000 -0300 -+++ linux-2.6.21/arch/arm/boot/compressed/head.S 2007-06-02 14:46:25.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/boot/compressed/head.S 2007-06-28 16:51:44.000000000 -0300 ++++ linux-2.6.21/arch/arm/boot/compressed/head.S 2007-06-28 16:51:50.000000000 -0300 @@ -117,6 +117,9 @@ mov r0, r0 .endr @@ -586,8 +569,8 @@ Index: linux-2.6.21/arch/arm/boot/compressed/head.S .word start @ absolute load/run zImage address Index: linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h =================================================================== ---- linux-2.6.21.orig/include/asm-arm/arch-pxa/uncompress.h 2007-06-02 14:46:22.000000000 -0300 -+++ linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h 2007-06-02 14:46:25.000000000 -0300 +--- linux-2.6.21.orig/include/asm-arm/arch-pxa/uncompress.h 2007-06-28 16:51:44.000000000 -0300 ++++ linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h 2007-06-28 16:51:50.000000000 -0300 @@ -14,14 +14,14 @@ #define STUART ((volatile unsigned long *)0x40700000) #define HWUART ((volatile unsigned long *)0x41600000) @@ -606,155 +589,10 @@ Index: linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h } /* -Index: linux-2.6.21/arch/arm/mach-pxa/ezx_ssp.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx_ssp.c 2007-06-02 14:46:25.000000000 -0300 -@@ -0,0 +1,126 @@ -+/* -+ * SSP control code for Motorola EZX phones -+ * -+ * Copyright (c) 2007 Daniel Ribeiro <drwyrm@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/sched.h> -+#include <linux/slab.h> -+#include <linux/delay.h> -+#include <linux/platform_device.h> -+#include <asm/hardware.h> -+#include <asm/mach-types.h> -+ -+#include <asm/arch/ssp.h> -+#include <asm/arch/pxa-regs.h> -+ -+#include "ezx.h" -+ -+static DEFINE_SPINLOCK(ezx_ssp_lock); -+static struct ssp_dev ezx_ssp_dev; -+static struct ssp_state ezx_ssp_state; -+static struct ezxssp_machinfo *ssp_machinfo; -+ -+/* PCAP */ -+unsigned long ezx_ssp_pcap_putget(ulong data) -+{ -+ unsigned long flag; -+ u32 ret = 0; -+ -+ spin_lock_irqsave(&ezx_ssp_lock, flag); -+ if (ssp_machinfo->cs_pcap >= 0) -+ GPCR(ssp_machinfo->cs_pcap) = GPIO_bit(ssp_machinfo->cs_pcap); -+ -+ ssp_write_word(&ezx_ssp_dev,data); -+ ssp_read_word(&ezx_ssp_dev, &ret); -+ -+ if (ssp_machinfo->cs_pcap >= 0) -+ GPSR(ssp_machinfo->cs_pcap) = GPIO_bit(ssp_machinfo->cs_pcap); -+ spin_unlock_irqrestore(&ezx_ssp_lock, flag); -+ -+ return ret; -+} -+EXPORT_SYMBOL(ezx_ssp_pcap_putget); -+ -+void __init ezx_ssp_set_machinfo(struct ezxssp_machinfo *machinfo) -+{ -+ ssp_machinfo = machinfo; -+} -+ -+static int __init ezx_ssp_probe(struct platform_device *dev) -+{ -+ int ret; -+ /* PCAP init */ -+ pxa_gpio_mode(29|GPIO_ALT_FN_3_OUT); -+ pxa_gpio_mode(GPIO24_SFRM_MD); -+ pxa_gpio_mode(GPIO25_STXD_MD); -+ pxa_gpio_mode(GPIO26_SRXD_MD); -+ -+ /* Chip Select - Disable All */ -+ if (ssp_machinfo->cs_pcap >= 0) -+ pxa_gpio_mode(ssp_machinfo->cs_pcap | GPIO_OUT | GPIO_DFLT_HIGH); -+ -+ ret = ssp_init(&ezx_ssp_dev, ssp_machinfo->port, 0); -+ -+ if (ret) -+ printk(KERN_ERR "Unable to register SSP handler!\n"); -+ else { -+ ssp_disable(&ezx_ssp_dev); -+ ssp_config(&ezx_ssp_dev, -+ (SSCR0_Motorola | SSCR0_DataSize(16) | SSCR0_EDSS), -+ (SSCR1_TxTresh(1) | SSCR1_RxTresh(1)), -+ 0, SSCR0_SerClkDiv(ssp_machinfo->clk_pcap)); -+ ssp_enable(&ezx_ssp_dev); -+ } -+ -+ return ret; -+} -+ -+static int ezx_ssp_remove(struct platform_device *dev) -+{ -+ ssp_exit(&ezx_ssp_dev); -+ return 0; -+} -+ -+static int ezx_ssp_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ ssp_flush(&ezx_ssp_dev); -+ ssp_save_state(&ezx_ssp_dev,&ezx_ssp_state); -+ -+ return 0; -+} -+ -+static int ezx_ssp_resume(struct platform_device *dev) -+{ -+ if (ssp_machinfo->cs_pcap >= 0) -+ GPSR(ssp_machinfo->cs_pcap) = GPIO_bit(ssp_machinfo->cs_pcap); -+ ssp_restore_state(&ezx_ssp_dev,&ezx_ssp_state); -+ ssp_enable(&ezx_ssp_dev); -+ -+ return 0; -+} -+ -+static struct platform_driver ezxssp_driver = { -+ .probe = ezx_ssp_probe, -+ .remove = ezx_ssp_remove, -+ .suspend = ezx_ssp_suspend, -+ .resume = ezx_ssp_resume, -+ .driver = { -+ .name = "ezx-ssp", -+ }, -+}; -+ -+int __init ezx_ssp_init(void) -+{ -+ return platform_driver_register(&ezxssp_driver); -+} -+ -+arch_initcall(ezx_ssp_init); -Index: linux-2.6.21/arch/arm/mach-pxa/ezx.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx.h 2007-06-02 14:46:25.000000000 -0300 -@@ -0,0 +1,9 @@ -+#include <asm/arch/ezx.h> -+ -+/* SSP */ -+struct ezxssp_machinfo { -+ int port; -+ int cs_pcap; -+ int clk_pcap; -+}; -+ Index: linux-2.6.21/arch/arm/mm/init.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mm/init.c 2007-06-02 14:46:22.000000000 -0300 -+++ linux-2.6.21/arch/arm/mm/init.c 2007-06-02 14:46:25.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mm/init.c 2007-06-28 16:51:44.000000000 -0300 ++++ linux-2.6.21/arch/arm/mm/init.c 2007-06-28 16:51:50.000000000 -0300 @@ -241,6 +241,10 @@ */ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, @@ -769,7 +607,7 @@ Index: linux-2.6.21/arch/arm/mm/init.c Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-02 14:46:25.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 20:53:01.000000000 -0300 @@ -0,0 +1,88 @@ +/* + * ezx-a780.c - Code specific to A780 GSM Phone. @@ -792,9 +630,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c +#include <asm/mach/arch.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> + +#include "generic.h" -+#include "ezx.h" + +extern void ezx_lcd_power(int, struct fb_var_screeninfo *); +extern void ezx_backlight_power(int); @@ -862,7 +700,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e2.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e2.c 2007-06-02 14:46:25.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e2.c 2007-06-28 20:54:24.000000000 -0300 @@ -0,0 +1,70 @@ +/* + * ezx-e2.c - Code specific to E2 GSM Phone. @@ -884,9 +722,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e2.c +#include <asm/mach/arch.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> + +#include "generic.h" -+#include "ezx.h" + +extern void ezx_lcd_power(int, struct fb_var_screeninfo *); +extern void ezx_backlight_power(int); @@ -937,7 +775,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e2.c Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-02 14:46:25.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 20:53:29.000000000 -0300 @@ -0,0 +1,87 @@ +/* + * ezx-e680.c - Code specific to E680 GSM Phone. @@ -959,9 +797,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c +#include <asm/mach/arch.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> + +#include "generic.h" -+#include "ezx.h" + +extern void ezx_lcd_power(int, struct fb_var_screeninfo *); +extern void ezx_backlight_power(int); @@ -1029,7 +867,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-02 14:46:25.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 20:53:48.000000000 -0300 @@ -0,0 +1,70 @@ +/* + * ezx-a1200.c - Code specific to A1200 GSM Phone. @@ -1051,9 +889,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c +#include <asm/mach/arch.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> + +#include "generic.h" -+#include "ezx.h" + +extern void ezx_lcd_power(int, struct fb_var_screeninfo *); +extern void ezx_backlight_power(int); @@ -1104,7 +942,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-06-02 14:48:08.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-06-28 20:54:07.000000000 -0300 @@ -0,0 +1,70 @@ +/* + * ezx-e6.c - Code specific to E6 GSM Phone. @@ -1126,9 +964,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c +#include <asm/mach/arch.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> + +#include "generic.h" -+#include "ezx.h" + +extern void ezx_lcd_power(int, struct fb_var_screeninfo *); +extern void ezx_backlight_power(int); diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch index 94581d4531..a86be24b30 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c 2007-06-02 20:32:34.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c 2007-08-01 19:45:27.000000000 -0300 @@ -0,0 +1,215 @@ +/* + * EMU Driver for Motorola EZX phones @@ -220,19 +220,11 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c +MODULE_LICENSE("GPL"); Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-02 20:32:32.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-06-02 20:32:34.000000000 -0300 -@@ -73,6 +73,7 @@ - - endchoice - -+ - endif - - if PXA_EZX -@@ -117,6 +118,28 @@ - config EZX_MCI_TF - bool +--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-08-01 19:39:02.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-08-01 19:45:27.000000000 -0300 +@@ -108,6 +108,28 @@ + config EZX_PCAP + bool "PCAP Support" +config EZX_EMU + bool "Motorola Enchanced Mini Usb" @@ -259,50 +251,10 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig endif endmenu -Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c -=================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-06-02 20:32:28.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-02 20:32:34.000000000 -0300 -@@ -150,11 +150,35 @@ - .resource = ezxpcap_resources, - }; - -+/* EMU */ -+static struct resource ezxemu_resources[] = { -+ [0] = { -+ .start = EZX_IRQ_USB4V, -+ .end = EZX_IRQ_USB4V, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [1] = { -+ .start = EZX_IRQ_USB1V, -+ .end = EZX_IRQ_USB1V, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+struct platform_device ezxemu_device = { -+ .name = "ezx-emu", -+ .id = -1, -+ .dev = { -+ .parent = &ezxpcap_device.dev, -+ }, -+ .num_resources = ARRAY_SIZE(ezxemu_resources), -+ .resource = ezxemu_resources, -+}; - - static struct platform_device *devices[] __initdata = { - &ezxssp_device, - &ezxbp_device, - &ezxpcap_device, -+ &ezxemu_device, - }; - - /* PM */ Index: linux-2.6.21/arch/arm/mach-pxa/Makefile =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-02 20:32:28.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-06-02 20:32:34.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-08-01 19:39:02.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-08-01 19:45:27.000000000 -0300 @@ -26,6 +26,7 @@ obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o obj-$(CONFIG_EZX_BP) += ezx-bp.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch index 6af6317a6e..91d33d6500 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c 2007-06-07 21:39:37.000000000 -0300 -@@ -0,0 +1,472 @@ ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c 2007-08-01 20:14:17.000000000 -0300 +@@ -0,0 +1,498 @@ +/* Driver for Motorola PCAP2 as present in EZX phones + * + * This is both a SPI device driver for PCAP itself, as well as @@ -24,21 +24,51 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +#include <asm/hardware.h> +#include <asm/mach-types.h> + ++#include <asm/arch/ezx.h> +#include <asm/arch/ssp.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/ezx-pcap.h> +#include <asm/arch/irqs.h> +#include <asm/mach/irq.h> + -+#include "ezx.h" -+ +#if 0 +#define DEBUGP(x, args...) printk(x, ## args) +#else +#define DEBUGP(x, args...) +#endif + -+extern unsigned long ezx_ssp_pcap_putget(ulong); ++static DEFINE_SPINLOCK(ezx_ssp_lock); ++static struct ssp_dev ezx_ssp_dev; ++static struct ssp_state ezx_ssp_state; ++static struct pcap_platform_data *pcap_data; ++ ++static unsigned long ezx_ssp_pcap_putget(ulong data) ++{ ++ unsigned long flag; ++ u32 ret = 0; ++ ++ spin_lock_irqsave(&ezx_ssp_lock, flag); ++ if (pcap_data->cs >= 0) { ++ if (pcap_data->flags & PCAP_CS_AH) ++ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ else ++ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ } ++ ++ ssp_write_word(&ezx_ssp_dev,data); ++ ssp_read_word(&ezx_ssp_dev, &ret); ++ ++ if (pcap_data->cs >= 0) { ++ if(pcap_data->flags & PCAP_CS_AH) ++ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ else ++ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ } ++ ++ spin_unlock_irqrestore(&ezx_ssp_lock, flag); ++ ++ return ret; ++} + +int ezx_pcap_write(u_int8_t reg_num, u_int32_t value) +{ @@ -160,72 +190,20 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +} +EXPORT_SYMBOL_GPL(ezx_pcap_vibrator_level); + -+static int __init pcap_init(void) -+{ -+ /* initialize registers */ -+#warning FIXME: pcap_init still chip level -+ /* implement a per board pcap init reg array? */ -+ -+ ezx_pcap_write(SSP_PCAP_ADJ_MSR_REGISTER, PCAP_MASK_ALL_INTERRUPT); -+ ezx_pcap_write(SSP_PCAP_ADJ_ISR_REGISTER, PCAP_CLEAR_INTERRUPT_REGISTER); -+ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1CTRL, 1); -+// ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL3); -+ -+ /* set SW1 sleep to keep SW1 1.3v in sync mode */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE10, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE11, 0); -+ /* SW1 active in sync mode */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE00, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE01, 0); -+ /* at SW1 -core voltage to 1.30V */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW10_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW11_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW12_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW13_DVS, 0); -+ -+ /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_LOWPWR, 0); -+ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_LOWPWR, 0); -+ -+ /* when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 --- -+ * camera for e680 */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_LOWPWR, 1); -+ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_LOWPWR, 0); -+ -+ /* set Vc to low power mode when AP sleep */ -+ //SSP_PCAP_bit_set( SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VC_STBY); -+ -+ /* set VAUX2 to voltage 2.775V and low power mode when AP sleep */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_1, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_0, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_LOWPWR, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN, 1); -+ -+// PGSR(GPIO34_TXENB) |= GPIO_bit(GPIO34_TXENB); -+ -+ return 0; -+} +/* MMC/SD specific functions */ + +void ezx_pcap_mmcsd_voltage(u_int32_t bits) +{ + unsigned int tmp; + ezx_pcap_read(SSP_PCAP_ADJ_AUX_VREG_REGISTER, &tmp); -+#if defined(CONFIG_EZX_MCI_SD) -+ tmp &= 0xffffff9f; /* zero all vaux2 bits */ -+ tmp |= (bits & 0x3) << 5; -+#elif defined(CONFIG_EZX_MCI_TF) -+ tmp &= 0xfffff0ff; /* zero all vaux3 bits */ -+ tmp |= (bits & 0xf) << 8; -+#endif ++ if (pcap_data->flags & PCAP_MCI_SD) { ++ tmp &= 0xffffff9f; /* zero all vaux2 bits */ ++ tmp |= (bits & 0x3) << 5; ++ } ++ else if (pcap_data->flags & PCAP_MCI_TF) { ++ tmp &= 0xfffff0ff; /* zero all vaux3 bits */ ++ tmp |= (bits & 0xf) << 8; ++ } + ezx_pcap_write(SSP_PCAP_ADJ_AUX_VREG_REGISTER, tmp); +} +EXPORT_SYMBOL(ezx_pcap_mmcsd_voltage); @@ -234,11 +212,12 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +{ + if (on > 0) on = 1; + else on = 0; -+#if defined(CONFIG_EZX_MCI_SD) -+ return ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN, on); -+#elif defined(CONFIG_EZX_MCI_TF) -+ return ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX3_EN, on); -+#endif ++ if (pcap_data->flags & PCAP_MCI_SD) ++ return ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN, on); ++ else if (pcap_data->flags & PCAP_MCI_TF) ++ return ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX3_EN, on); ++ else ++ return -ENODEV; +} +EXPORT_SYMBOL_GPL(ezx_pcap_mmcsd_power); + @@ -397,18 +376,54 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + set_irq_flags(irq, 0); + } + ++ ssp_exit(&ezx_ssp_dev); ++ + return 0; +} + +static int __init ezx_pcap_probe(struct platform_device *pdev) +{ -+ unsigned int irq; ++ unsigned int ret, irq; + DEBUGP("ezx_pcap_probe entered\n"); + -+ pcap_init(); ++ pcap_data = pdev->dev.platform_data; ++ ++ /* configure ssp port */ ++ pxa_gpio_mode(29|GPIO_ALT_FN_3_OUT); ++ pxa_gpio_mode(GPIO24_SFRM_MD); ++ pxa_gpio_mode(GPIO25_STXD_MD); ++ pxa_gpio_mode(GPIO26_SRXD_MD); ++ ++ if (pcap_data->cs >= 0) { ++ if (pcap_data->flags & PCAP_CS_AH) ++ pxa_gpio_mode(pcap_data->cs | GPIO_OUT); ++ else ++ pxa_gpio_mode(pcap_data->cs | GPIO_OUT ++ | GPIO_DFLT_HIGH); ++ } ++ ++ ret = ssp_init(&ezx_ssp_dev, pcap_data->port, 0); ++ if (ret) { ++ printk(KERN_ERR "Unable to register SSP handler!\n"); ++ return ret; ++ } ++ ++ ssp_disable(&ezx_ssp_dev); ++ ssp_config(&ezx_ssp_dev, ++ (SSCR0_Motorola | SSCR0_DataSize(16) | SSCR0_EDSS), ++ (SSCR1_TxTresh(1) | SSCR1_RxTresh(1)), ++ 0, SSCR0_SerClkDiv(pcap_data->clk)); ++ ssp_enable(&ezx_ssp_dev); ++ ++ /* mask/ack all PCAP interrupts */ ++ ezx_pcap_write(SSP_PCAP_ADJ_MSR_REGISTER, PCAP_MASK_ALL_INTERRUPT); ++ ezx_pcap_write(SSP_PCAP_ADJ_ISR_REGISTER, PCAP_CLEAR_INTERRUPT_REGISTER); ++ ++ if (pcap_data->init) ++ pcap_data->init(); + -+ set_irq_type(IRQ_GPIO1, IRQT_RISING); + /* set up interrupt demultiplexing code for PCAP2 irqs */ ++ set_irq_type(IRQ_GPIO1, IRQT_RISING); + for (irq = EZX_IRQ(0); irq <= EZX_IRQ(6); irq++) { + set_irq_chip(irq, &pcap_chip); + set_irq_handler(irq, handle_edge_irq); @@ -417,19 +432,30 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + set_irq_chained_handler(IRQ_GPIO1, pcap_irq_demux_handler); + + printk("ezx-pcap: ssp driver registered\n"); -+ -+ return 0; ++ return ret; +} + +static int ezx_pcap_suspend(struct platform_device *dev, pm_message_t state) +{ + DEBUGP("pcap suspend!\n"); ++ ssp_flush(&ezx_ssp_dev); ++ ssp_save_state(&ezx_ssp_dev, &ezx_ssp_state); + return 0; +} + +static int ezx_pcap_resume(struct platform_device *dev) +{ + DEBUGP("pcap resume!\n"); ++ ++ if (pcap_data->cs >= 0) { ++ if (pcap_data->flags & PCAP_CS_AH) ++ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ else ++ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ } ++ ssp_restore_state(&ezx_ssp_dev,&ezx_ssp_state); ++ ssp_enable(&ezx_ssp_dev); ++ + /* ack all irqs */ + ezx_pcap_write(SSP_PCAP_ADJ_ISR_REGISTER, PCAP_CLEAR_INTERRUPT_REGISTER); + return 0; @@ -478,8 +504,21 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c Index: linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h 2007-06-03 11:14:40.000000000 -0300 -@@ -0,0 +1,665 @@ ++++ linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h 2007-06-29 01:07:18.000000000 -0300 +@@ -0,0 +1,678 @@ ++struct pcap_platform_data { ++ int port; ++ int cs; ++ int clk; ++ int flags; ++ int (*init)(void); ++}; ++ ++#define PCAP_CS_AH 0x1 ++#define PCAP_MCI_SD 0x2 ++#define PCAP_MCI_TF 0x4 ++ ++ +/* (c) Copyright Motorola Beijing 2002 all rights reserved. + + Project Name : EZX @@ -1147,8 +1186,8 @@ Index: linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h +#endif Index: linux-2.6.21/include/asm-arm/arch-pxa/irqs.h =================================================================== ---- linux-2.6.21.orig/include/asm-arm/arch-pxa/irqs.h 2007-06-03 02:17:12.000000000 -0300 -+++ linux-2.6.21/include/asm-arm/arch-pxa/irqs.h 2007-06-03 11:14:40.000000000 -0300 +--- linux-2.6.21.orig/include/asm-arm/arch-pxa/irqs.h 2007-06-29 01:06:37.000000000 -0300 ++++ linux-2.6.21/include/asm-arm/arch-pxa/irqs.h 2007-06-29 01:07:18.000000000 -0300 @@ -176,7 +176,8 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ @@ -1173,65 +1212,24 @@ Index: linux-2.6.21/include/asm-arm/arch-pxa/irqs.h +#define EZX_IRQ_ADCDONE EZX_IRQ(4) +#define EZX_IRQ_TS EZX_IRQ(5) /* TS touch */ +#define EZX_IRQ_ADCDONE2 EZX_IRQ(6) /* TS x/y ADC ready */ -Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c -=================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-06-03 11:14:40.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-09 14:57:44.000000000 -0300 -@@ -131,11 +131,30 @@ - .resource = ezxbp_resources, - }; - -+/* PCAP */ -+static struct resource ezxpcap_resources[] = { -+ [0] = { -+ .start = IRQ_GPIO1, -+ .end = IRQ_GPIO1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+struct platform_device ezxpcap_device = { -+ .name = "ezx-pcap", -+ .id = -1, -+ .dev = { -+ .parent = &ezxssp_device.dev, -+ }, -+ .num_resources = ARRAY_SIZE(ezxpcap_resources), -+ .resource = ezxpcap_resources, -+}; - - - static struct platform_device *devices[] __initdata = { - &ezxssp_device, - &ezxbp_device, -+ &ezxpcap_device, - }; - - /* PM */ Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-03 11:14:40.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-06-09 14:57:46.000000000 -0300 -@@ -105,6 +105,15 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-29 01:07:18.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-08-01 20:14:28.000000000 -0300 +@@ -105,6 +105,9 @@ config EZX_BP bool "BP Control code for EZX Platform" +config EZX_PCAP + bool "PCAP Support" + -+config EZX_MCI_SD -+ bool -+ -+config EZX_MCI_TF -+ bool -+ endif endmenu Index: linux-2.6.21/arch/arm/mach-pxa/Makefile =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-03 11:14:40.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-06-09 14:57:44.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-29 01:07:18.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-08-01 20:14:28.000000000 -0300 @@ -25,6 +25,7 @@ obj-$(CONFIG_PXA_EZX_A1200) += ezx-a1200.o obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-pm.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-pm.patch index 85b6f5c15d..ff3413f062 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-pm.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-pm.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/pxa27x.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/pxa27x.c 2007-05-08 16:29:23.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/pxa27x.c 2007-05-08 16:29:36.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/pxa27x.c 2007-06-28 19:44:28.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/pxa27x.c 2007-06-28 19:44:58.000000000 -0300 @@ -22,6 +22,10 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/ohci.h> @@ -29,8 +29,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/pxa27x.c } Index: linux-2.6.21/arch/arm/mach-pxa/pm.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/pm.c 2007-05-08 16:29:23.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/pm.c 2007-05-08 16:29:36.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/pm.c 2007-06-28 19:44:28.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/pm.c 2007-06-28 19:44:58.000000000 -0300 @@ -24,6 +24,10 @@ #include <asm/arch/lubbock.h> #include <asm/mach/time.h> @@ -58,17 +58,17 @@ Index: linux-2.6.21/arch/arm/mach-pxa/pm.c RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-05-08 16:29:36.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-05-08 16:32:56.000000000 -0300 -@@ -18,6 +18,7 @@ - #include <asm/arch/pxafb.h> +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-06-28 19:44:52.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-28 19:44:58.000000000 -0300 +@@ -19,6 +19,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/ohci.h> + #include <asm/arch/ezx.h> +#include <asm/arch/system.h> #include "generic.h" - #include "ezx.h" -@@ -137,8 +138,69 @@ + +@@ -122,8 +123,69 @@ &ezxbp_device, }; @@ -137,4 +137,4 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c + CKEN = CKEN9_OSTIMER | CKEN22_MEMC; - ezx_ssp_set_machinfo(&ezx_ssp_machinfo); + pxa_gpio_mode(GPIO_ICL_FFRXD_MD); diff --git a/packages/linux/linux-ezx-2.6.21/patches/index.html b/packages/linux/linux-ezx-2.6.21/patches/index.html new file mode 100644 index 0000000000..4d57380e0c --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/index.html @@ -0,0 +1,60 @@ +<html><head><title>Revision 2047: /trunk/src/kernel-2.6/patches</title></head> +<body> + <h2>Revision 2047: /trunk/src/kernel-2.6/patches</h2> + <ul> + <li><a href="../">..</a></li> + <li><a href="Makefile.OpenEZX">Makefile.OpenEZX</a></li> + <li><a href="a1200-mci.patch">a1200-mci.patch</a></li> + <li><a href="a1200-pcap.patch">a1200-pcap.patch</a></li> + <li><a href="a1200-ts.patch">a1200-ts.patch</a></li> + <li><a href="a780-emu.patch">a780-emu.patch</a></li> + <li><a href="a780-flip.patch">a780-flip.patch</a></li> + <li><a href="a780-kbd.patch">a780-kbd.patch</a></li> + <li><a href="a780-leds.patch">a780-leds.patch</a></li> + <li><a href="a780-mci.patch">a780-mci.patch</a></li> + <li><a href="a780-pcap.patch">a780-pcap.patch</a></li> + <li><a href="a780-ts.patch">a780-ts.patch</a></li> + <li><a href="a780-vibrator.patch">a780-vibrator.patch</a></li> + <li><a href="asoc-pxa-ssp.patch">asoc-pxa-ssp.patch</a></li> + <li><a href="defconfig-a1200">defconfig-a1200</a></li> + <li><a href="defconfig-a780">defconfig-a780</a></li> + <li><a href="defconfig-e2">defconfig-e2</a></li> + <li><a href="defconfig-e6">defconfig-e6</a></li> + <li><a href="defconfig-e680">defconfig-e680</a></li> + <li><a href="dmesg-a780.log">dmesg-a780.log</a></li> + <li><a href="e680-emu.patch">e680-emu.patch</a></li> + <li><a href="e680-kbd.patch">e680-kbd.patch</a></li> + <li><a href="e680-leds.patch">e680-leds.patch</a></li> + <li><a href="e680-locksw.patch">e680-locksw.patch</a></li> + <li><a href="e680-mci.patch">e680-mci.patch</a></li> + <li><a href="e680-pcap.patch">e680-pcap.patch</a></li> + <li><a href="e680-ts.patch">e680-ts.patch</a></li> + <li><a href="ezx-asoc.patch">ezx-asoc.patch</a></li> + <li><a href="ezx-backlight.patch">ezx-backlight.patch</a></li> + <li><a href="ezx-bp.patch">ezx-bp.patch</a></li> + <li><a href="ezx-core.patch">ezx-core.patch</a></li> + <li><a href="ezx-emu.patch">ezx-emu.patch</a></li> + <li><a href="ezx-enable-stuart.patch">ezx-enable-stuart.patch</a></li> + <li><a href="ezx-mtd-map.patch">ezx-mtd-map.patch</a></li> + <li><a href="ezx-pcap.patch">ezx-pcap.patch</a></li> + <li><a href="ezx-pm.patch">ezx-pm.patch</a></li> + <li><a href="ezx-serial-bug-workaround.patch">ezx-serial-bug-workaround.patch</a></li> + <li><a href="mux-fix-init-errorpath.patch">mux-fix-init-errorpath.patch</a></li> + <li><a href="mux-fix-makefile.patch">mux-fix-makefile.patch</a></li> + <li><a href="mux-fix-tty-driver.patch">mux-fix-tty-driver.patch</a></li> + <li><a href="mux-fix.patch">mux-fix.patch</a></li> + <li><a href="mux-ifdef-ezx-features.patch">mux-ifdef-ezx-features.patch</a></li> + <li><a href="mux-linux-2.6.21-fix.patch">mux-linux-2.6.21-fix.patch</a></li> + <li><a href="mux-remove-flipbuffers.patch">mux-remove-flipbuffers.patch</a></li> + <li><a href="mux-remove-get_halted_bit.patch">mux-remove-get_halted_bit.patch</a></li> + <li><a href="mux-remove-usbh_finished_resume.patch">mux-remove-usbh_finished_resume.patch</a></li> + <li><a href="mux_cli.patch">mux_cli.patch</a></li> + <li><a href="mux_debug.patch">mux_debug.patch</a></li> + <li><a href="patch-2.6.21.4">patch-2.6.21.4</a></li> + <li><a href="pcap-ts.patch">pcap-ts.patch</a></li> + <li><a href="pxa-kbd.patch">pxa-kbd.patch</a></li> + <li><a href="pxa27x-udc-support.2.patch">pxa27x-udc-support.2.patch</a></li> + <li><a href="series">series</a></li> + </ul> + <hr noshade><em>Powered by <a href="http://subversion.tigris.org/">Subversion</a> version 1.1.4 (r13838).</em> +</body></html>
\ No newline at end of file diff --git a/packages/linux/linux-ezx-2.6.21/patches/series b/packages/linux/linux-ezx-2.6.21/patches/series index 5580b74bf8..ecdc30b5fe 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/series +++ b/packages/linux/linux-ezx-2.6.21/patches/series @@ -20,10 +20,11 @@ ezx-pm.patch ezx-pcap.patch # ezx-pcap TODO: -# implement a per board init reg array -# move mmc functions to the ezx-phone.c mmc init # move vibrator level function to the vibrator driver +a780-pcap.patch +e680-pcap.patch +a1200-pcap.patch a780-mci.patch e680-mci.patch @@ -36,6 +37,9 @@ ezx-emu.patch # userspace interface for controling emu # read adc to find which accessory is plugged +a780-emu.patch +e680-emu.patch + ezx-mtd-map.patch # ezx-mtd-map TODO: # at least the original partition should go on the ezx-phone.c file @@ -89,5 +93,5 @@ mux-linux-2.6.21-fix.patch # pxa-ohci, ts0710_mux, ts0710_mux_usb, ezx-bp # incomplete -#asoc-pxa-ssp.patch -#ezx-asoc.patch +asoc-pxa-ssp.patch +ezx-asoc.patch diff --git a/packages/linux/linux-ezx-2.6.21/rokre2/.mtn2git_empty b/packages/linux/linux-ezx-2.6.21/rokre2/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/rokre2/.mtn2git_empty |