diff options
Diffstat (limited to 'packages/linux/linux-2.6.27')
| -rw-r--r-- | packages/linux/linux-2.6.27/boc01/013-090114-lcd.patch | 867 | ||||
| -rw-r--r-- | packages/linux/linux-2.6.27/boc01/defconfig | 2 |
2 files changed, 868 insertions, 1 deletions
diff --git a/packages/linux/linux-2.6.27/boc01/013-090114-lcd.patch b/packages/linux/linux-2.6.27/boc01/013-090114-lcd.patch new file mode 100644 index 0000000000..1ab2468ce0 --- /dev/null +++ b/packages/linux/linux-2.6.27/boc01/013-090114-lcd.patch @@ -0,0 +1,867 @@ +diff -urN linux-2.6.27.orig/drivers/video/Kconfig linux-2.6.27/drivers/video/Kconfig +--- linux-2.6.27.orig/drivers/video/Kconfig 2008-10-10 00:13:53.000000000 +0200 ++++ linux-2.6.27/drivers/video/Kconfig 2009-01-14 12:50:33.000000000 +0100 +@@ -480,6 +480,19 @@ + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. + ++config FB_NT7506 ++ tristate "Novatek 7506 Monochrome LCD board support" ++ depends on FB ++ select FB_SYS_FILLRECT ++ select FB_SYS_COPYAREA ++ select FB_SYS_IMAGEBLIT ++ select FB_SYS_FOPS ++ select FB_BACKLIGHT ++ select LCD_CLASS_DEVICE ++ help ++ This enables support for the Novatek 7506 Monochrome LCD board. ++ The board is based on the NT7506 LCD controller. ++ + config FB_ATARI + bool "Atari native chipset support" + depends on (FB = y) && ATARI +diff -urN linux-2.6.27.orig/drivers/video/Makefile linux-2.6.27/drivers/video/Makefile +--- linux-2.6.27.orig/drivers/video/Makefile 2008-10-10 00:13:53.000000000 +0200 ++++ linux-2.6.27/drivers/video/Makefile 2009-01-14 12:50:27.000000000 +0100 +@@ -31,6 +31,7 @@ + obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o + obj-$(CONFIG_FB_AM200EPD) += am200epd.o + obj-$(CONFIG_FB_ARC) += arcfb.o ++obj-$(CONFIG_FB_NT7506) += nt7506fb.o + obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o + obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o + obj-$(CONFIG_FB_PM2) += pm2fb.o +diff -urN linux-2.6.27.orig/drivers/video/nt7506fb.c linux-2.6.27/drivers/video/nt7506fb.c +--- linux-2.6.27.orig/drivers/video/nt7506fb.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.27/drivers/video/nt7506fb.c 2009-01-14 12:51:02.000000000 +0100 +@@ -0,0 +1,794 @@ ++/* ++ * linux/drivers/video/nt7506fb.c -- FB driver for NT7506 monochrome LCD board ++ * ++ * Copyright (C) 2008, CenoSYS (www.cenosys.com). ++ * ++ * Alexandre Coffignal <alexandre.coffignal@cenosys.com> ++ * Sylvain Giroudon <sylvain.giroudon@goobie.fr> ++ * Jeremy Laine <jeremy.laine@bolloretelecom.eu> ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ * Layout is based on arcfb.c by Jaya Kumar ++ * ++ * This driver was written to be used with the Novatek NT7506 LCD board. ++ * ++ * Novatek uses a set of NT7506 chips that control individual 128x128 LCD ++ * matrices. The interface between the board and the host is TTL based GPIO. ++ * ++ * General notes: ++ * - User must set tuhold. It's in microseconds. According to the 108 spec, ++ * the hold time is supposed to be at least 1 microsecond. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <linux/string.h> ++#include <linux/mm.h> ++#include <linux/slab.h> ++#include <linux/vmalloc.h> ++#include <linux/delay.h> ++#include <linux/interrupt.h> ++#include <linux/fb.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/backlight.h> ++#include <linux/lcd.h> ++#include <linux/nt7506fb.h> ++ ++#include <linux/uaccess.h> ++ ++#define DRIVER_NAME "nt7506fb" ++ ++//NT7506 Hardware ++#define LCD_RST 0x08 ++#define LCD_RSTN 0x00 ++#define LCD_BCKLIGH 0x04 ++#define LCD_BCKLIGHN 0x00 ++#define LCD_RS 0x02 ++#define LCD_RSN 0x00 ++#define LCD_ERD 0x01 ++#define LCD_ERDN 0x00 ++ ++//Base address ++#define LCD_BASE 0xf0000000 ++#define LCD_SIZE 0x2 ++ ++//NT7506 Instructions ++#define NT_ICON 0xA2 ++#define NT_PAGE_ADDR 0xB0 ++#define NT_COL_MSB 0x10 ++#define NT_COL_LSB 0x00 ++#define NT_DISP 0xAE ++#define NT_START_LINE 0x40 ++#define NT_COM0 0x44 ++#define NT_DUTY 0x48 ++#define DUTY_1_128 0x80 ++#define NT_REV_DISP 0xA6 ++#define NT_POWER 0x28 ++#define VC 0x04 ++#define VR 0x02 ++#define VF 0x01 ++#define NT_DCDC 0x64 ++#define TIME6 0x03 ++#define NT_REG_RES 0x20 ++#define RES_7_2 0x07 ++#define NT_ELEC_VOL 0x81 ++#define NT_BIAS 0x50 ++#define BIAS_1_11 0x06 ++#define NT_ADC_NOR 0xA0 ++#define NT_ADC_REV 0xA1 ++#define NT_SHL_NOR 0xC0 ++#define NT_SHL_REV 0xC8 ++#define NT_OSC 0xAB ++#define NT_RESET 0xE2 ++#define NT_DATA_DIR 0xe8 ++#define NT_FRC_PWM 0x90 ++#define PWM15 0x03 ++ ++#define ON 0x01 ++#define OFF 0x00 ++ ++#define NT_GRAY_SCALE 0x88 ++#define GRAY_WHITE_AB 0 ++#define GRAY_WHITE_CD 1 ++#define GRAY_LIGHT_AB 2 ++#define GRAY_LIGHT_CD 3 ++#define GRAY_DARK_AB 4 ++#define GRAY_DARK_CD 5 ++#define GRAY_BLACK_AB 6 ++#define GRAY_BLACK_CD 7 ++ ++// Geometric settings ++#define LCD_WIDTH 128 ++#define LCD_HEIGHT 128 ++#define LCD_NPAGES (LCD_HEIGHT/8) /* LCD pages of 8 vertical pixels */ ++ ++#define LCD_GRAYSCALE ++ ++#define DEFAULT_CONTRAST 20 ++#define DEFAULT_FPS 5 ++ ++static struct resource *lcd_mem = NULL; ++static void * _lcd_io = NULL; ++static unsigned long tuhold; ++struct fb_info *info; ++static struct timer_list fb_timer; ++static char _refresh = 0; ++static char _fps = DEFAULT_FPS; ++static char _backlight = 1; ++ ++struct nt7506fb_par { ++ atomic_t ref_count; ++ struct fb_info *info; ++ spinlock_t lock; ++ struct lcd_device *lcd_dev; ++ int contrast; ++}; ++ ++static struct fb_fix_screeninfo nt7506fb_fix __initdata = { ++ .id = DRIVER_NAME, ++ .type = FB_TYPE_PACKED_PIXELS, ++#ifdef LCD_GRAYSCALE ++ .visual = FB_VISUAL_STATIC_PSEUDOCOLOR, ++ .line_length = LCD_WIDTH / 4, ++#else ++ .visual = FB_VISUAL_MONO01, ++ .line_length = LCD_WIDTH / 8, ++#endif ++ .xpanstep = 1, ++ .ypanstep = 1, ++ .ywrapstep = 0, ++ .accel = FB_ACCEL_NONE, ++}; ++ ++static struct fb_var_screeninfo nt7506fb_var __initdata = { ++ .xres = LCD_WIDTH, ++ .yres = LCD_HEIGHT, ++ .xres_virtual = LCD_WIDTH, ++ .yres_virtual = LCD_HEIGHT, ++ .nonstd = 1, ++#ifdef LCD_GRAYSCALE ++ .bits_per_pixel = 2, ++ .grayscale = 1, ++ .red = { 0, 2, 0 }, ++ .green = { 0, 2, 0 }, ++ .blue = { 0, 2, 0 }, ++ .transp = { 0, 0, 0 }, ++#else ++ .bits_per_pixel = 1, ++#endif ++}; ++ ++ ++/* ++ * Low-level i/o primitives ++ */ ++ ++static void NT7506_init_lcd(char ael); ++ ++static void NT7506_writeb_ctl(unsigned char value) ++{ ++ unsigned short svalue; ++ char bl = _backlight ? LCD_BCKLIGH : LCD_BCKLIGHN; ++ ++ svalue=value<<8 | LCD_RSN | LCD_RST | LCD_ERDN | bl; ++ iowrite16(svalue, _lcd_io); ++ udelay(tuhold); ++ //The data on DB0/7 are latched at the falling edge of the E_RD signal ++ svalue=value<<8 | LCD_RSN | LCD_RST | LCD_ERD | bl; ++ iowrite16(svalue, _lcd_io); ++ udelay(tuhold); ++} ++ ++static void NT7506_writeb_data(unsigned char value) ++{ ++ unsigned short svalue; ++ char bl = _backlight ? LCD_BCKLIGH : LCD_BCKLIGHN; ++ ++ svalue=value<<8|LCD_RS |LCD_RST | LCD_ERD | bl ; ++ iowrite16(svalue, _lcd_io); ++ udelay(tuhold); ++ //The data on DB0/7 are latched at the falling edge of the E_RD signal ++ svalue=value<<8|LCD_RS |LCD_RST | LCD_ERDN | bl; ++ iowrite16(svalue, _lcd_io); ++ udelay(tuhold); ++} ++ ++static void NT7506_set_start_line(unsigned char y) ++{ ++ NT7506_writeb_ctl(NT_START_LINE); ++ NT7506_writeb_ctl(y); ++} ++ ++static void NT7506_set_yaddr(unsigned char y) ++{ ++ NT7506_writeb_ctl(NT_PAGE_ADDR+y); ++} ++ ++static void NT7506_set_xaddr(unsigned char x) ++{ ++ NT7506_writeb_ctl(NT_COL_MSB | (x >> 0x04)); //Send high nibble ++ NT7506_writeb_ctl(NT_COL_LSB | (x & 0x0F) ); //Send low nibble ++} ++ ++ ++/* ++ * LCD device management ++ */ ++ ++static int ++nt7506fb_lcd_get_contrast(struct lcd_device *lcd_dev) ++{ ++ struct nt7506fb_par *par = lcd_get_data(lcd_dev); ++ return par->contrast; ++} ++ ++static int ++nt7506fb_lcd_set_contrast(struct lcd_device *lcd_dev, int contrast) ++{ ++ struct nt7506fb_par *par = lcd_get_data(lcd_dev); ++ ++ par->contrast = contrast; ++ NT7506_writeb_ctl(NT_ELEC_VOL); NT7506_writeb_ctl(par->contrast); ++ ++ //printk(KERN_INFO DRIVER_NAME": contrast = %d\n", par->contrast); ++ return 0; ++} ++ ++static struct lcd_ops nt7506fb_lcd_ops = { ++ .get_contrast = nt7506fb_lcd_get_contrast, ++ .set_contrast = nt7506fb_lcd_set_contrast, ++}; ++ ++static void ++nt7506fb_lcd_init(struct nt7506fb_par *par) ++{ ++ struct fb_info *info = par->info; ++ struct lcd_device *lcd_dev; ++ ++ lcd_dev = lcd_device_register(DRIVER_NAME, info->dev, par, &nt7506fb_lcd_ops); ++ if (IS_ERR(lcd_dev)) { ++ par->lcd_dev = NULL; ++ printk(KERN_WARNING DRIVER_NAME ": LCD device registration failed\n"); ++ return; ++ } ++ ++ par->lcd_dev = lcd_dev; ++ lcd_dev->props.max_contrast = 255; ++ par->contrast = DEFAULT_CONTRAST; ++ printk(KERN_INFO DRIVER_NAME ": LCD contrast management initialized\n"); ++} ++ ++static void ++nt7506fb_lcd_exit(struct nt7506fb_par *par) ++{ ++ if ( par->lcd_dev ) { ++ lcd_device_unregister(par->lcd_dev); ++ par->lcd_dev = NULL; ++ } ++} ++ ++ ++/* ++ * Backlight device management ++ */ ++ ++static int ++nt7506fb_bl_update_status(struct backlight_device *bd) ++{ ++ _refresh = 0; ++ ++ if (bd->props.power != FB_BLANK_UNBLANK || ++ bd->props.fb_blank != FB_BLANK_UNBLANK) ++ _backlight = 0; ++ else ++ _backlight = bd->props.brightness; ++ ++ _refresh = 1; ++ ++ //printk(KERN_INFO DRIVER_NAME": backlight = %d\n", _backlight); ++ return 0; ++} ++ ++static int ++nt7506fb_bl_get_brightness(struct backlight_device *bd) ++{ ++ return bd->props.brightness; ++} ++ ++static struct backlight_ops nt7506fb_bl_ops = { ++ .get_brightness = nt7506fb_bl_get_brightness, ++ .update_status = nt7506fb_bl_update_status, ++}; ++ ++ ++static void ++nt7506fb_bl_init(struct nt7506fb_par *par) ++{ ++ struct fb_info *info = par->info; ++ struct backlight_device *bd; ++ ++ bd = backlight_device_register(DRIVER_NAME, info->dev, par, &nt7506fb_bl_ops); ++ if (IS_ERR(bd)) { ++ info->bl_dev = NULL; ++ printk(KERN_WARNING DRIVER_NAME ": Backlight device registration failed\n"); ++ return; ++ } ++ ++ info->bl_dev = bd; ++ bd->props.max_brightness = 1; ++ bd->props.power = FB_BLANK_UNBLANK; ++ bd->props.brightness = 1; ++ nt7506fb_bl_update_status(bd); ++ ++ printk(KERN_INFO DRIVER_NAME ": Backlight control initialized\n"); ++} ++ ++static void ++nt7506fb_bl_exit(struct fb_info *info) ++{ ++ if ( info->bl_dev ) { ++ backlight_device_unregister(info->bl_dev); ++ info->bl_dev = NULL; ++ } ++} ++ ++ ++/* ++ * Main frame buffer operations ++ */ ++ ++static int nt7506fb_open(struct fb_info *info, int user) ++{ ++ struct nt7506fb_par *par = info->par; ++ atomic_inc(&par->ref_count); ++ return 0; ++} ++ ++static int nt7506fb_release(struct fb_info *info, int user) ++{ ++ struct nt7506fb_par *par = info->par; ++ int count = atomic_read(&par->ref_count); ++ if (!count) ++ return -EINVAL; ++ atomic_dec(&par->ref_count); ++ return 0; ++} ++ ++static int nt7506fb_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ if ( (var->vmode & FB_VMODE_YWRAP) && ++ (var->yoffset < LCD_HEIGHT) && ++ (info->var.yres <= LCD_HEIGHT) ) { ++ NT7506_set_start_line(var->yoffset); ++ info->var.yoffset = var->yoffset; ++ return 0; ++ } ++ ++ return -EINVAL; ++} ++ ++static void nt7506fb_lcd_update(struct nt7506fb_par *par) ++{ ++ unsigned char *src = (unsigned char __force *) par->info->screen_base; ++ int line_length = par->info->fix.line_length; ++ int page, x, bit; ++ unsigned char plane1, plane2; ++ unsigned char *ptr; ++ unsigned char xshift; ++ ++ if ( info->var.bits_per_pixel == 1 ) { ++ ++ for (page = 0; page < LCD_NPAGES; page++) { ++ NT7506_set_yaddr(page); ++ NT7506_set_xaddr(0); ++ for (x = 0; x < LCD_WIDTH; x++) { ++ xshift = 7 - (x % 8); ++ plane1 = plane2 = 0; ++ ptr = src + (page * 8 * line_length + x / 8); ++ for (bit = 0; bit < 8; ptr += line_length, bit++) { ++ plane1 |= (((*ptr) >> xshift) & 1) << bit; ++ } ++ NT7506_writeb_data(plane1); ++ NT7506_writeb_data(plane2); ++ } ++ NT7506_writeb_data((unsigned char)0); ++ } ++ ++ } else { ++ ++ for (page = 0; page < LCD_NPAGES; page++) { ++ NT7506_set_yaddr(page); ++ NT7506_set_xaddr(0); ++ for (x = 0; x < LCD_WIDTH; x++) { ++ xshift = (3 - (x % 4)) << 1; ++ plane1 = plane2 = 0; ++ ptr = src + (page * 8 * line_length + x / 4); ++ for (bit = 0; bit < 8; ptr += line_length, bit++) { ++ plane1 |= (((*ptr) >> (xshift + 1)) & 1) << bit; ++ plane2 |= (((*ptr) >> xshift) & 1) << bit; ++ } ++ NT7506_writeb_data(plane1); ++ NT7506_writeb_data(plane2); ++ } ++ NT7506_writeb_data((unsigned char)0); ++ } ++ ++ } ++} ++ ++static void nt7506fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) ++{ ++ sys_fillrect(info, rect); ++} ++ ++ ++ ++static void nt7506fb_copyarea(struct fb_info *info, ++ const struct fb_copyarea *area) ++{ ++ sys_copyarea(info, area); ++} ++ ++ ++static void nt7506fb_imageblit(struct fb_info *info, const struct fb_image *image) ++{ ++ sys_imageblit(info, image); ++} ++ ++ ++/* ++ * this is the access path from userspace. they can seek and write to ++ * the fb. it's inefficient for them to do anything less than 128*8 ++ * writes since we update the lcd in each write() anyway. ++ */ ++static ssize_t nt7506fb_write(struct fb_info *info, const char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ unsigned long p = *ppos; ++ unsigned int fbmemlength; ++ int err = 0; ++ ++ fbmemlength = (info->var.xres * info->var.yres)/8; ++ ++ if ( p > fbmemlength ) { ++ return -EFBIG; ++ } ++ ++ if ( (count + p) > fbmemlength ) { ++ count = fbmemlength - p; ++ err = -ENOSPC; ++ } ++ ++ if ( count ) { ++ char *base_addr = (char __force *) info->screen_base; ++ if ( copy_from_user(base_addr + p, buf, count) ) ++ err = -EFAULT; ++ } ++ ++ if ( !err ) ++ *ppos += count; ++ ++ return err ? err : count; ++} ++ ++ ++static int nt7506fb_mmap(struct fb_info *info, struct vm_area_struct *vma) ++{ ++ unsigned long off; ++ unsigned long start; ++ u32 len; ++ ++ if (vma->vm_end - vma->vm_start == 0) ++ return 0; ++ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) ++ return -EINVAL; ++ off = vma->vm_pgoff << PAGE_SHIFT; ++ start = info->fix.smem_start; ++ len = info->fix.smem_len; ++ if (off >= len) ++ { ++ return -EINVAL; ++ ++ } ++ if ((vma->vm_end - vma->vm_start + off) > len) ++ { ++ return -EINVAL; ++ } ++ off += start; ++ vma->vm_pgoff = off >> PAGE_SHIFT; ++ if (remap_pfn_range(vma, vma->vm_start, virt_to_phys((void *)info->fix.smem_start) >> PAGE_SHIFT, ++ info->fix.smem_len, vma->vm_page_prot)) ++ ++ { ++ return -EAGAIN; ++ } ++ return 0; ++ ++} ++ ++ ++static int nt7506fb_ioctl(struct fb_info *info, ++ unsigned int cmd, unsigned long arg) ++{ ++ unsigned char frame_rate; ++ ++ switch ( cmd ) { ++ case FBIO_FRAMERATE: ++ if (get_user(frame_rate, (unsigned char *)arg)) ++ return -EFAULT; ++ printk(KERN_INFO "fb%d: framerate=%d Hz\n", info->node, frame_rate); ++ _fps = frame_rate; ++ return 0; ++ ++ default: ++ return -EINVAL; ++ } ++} ++ ++ ++static struct fb_ops nt7506fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_open = nt7506fb_open, ++ .fb_read = fb_sys_read, ++ .fb_write = nt7506fb_write, ++ .fb_release = nt7506fb_release, ++ .fb_pan_display = nt7506fb_pan_display, ++ .fb_fillrect = nt7506fb_fillrect, ++ .fb_copyarea = nt7506fb_copyarea, ++ .fb_imageblit = nt7506fb_imageblit, ++ .fb_ioctl = nt7506fb_ioctl, ++ .fb_mmap = nt7506fb_mmap, ++}; ++ ++ ++static void ++nt7506fb_refresh(unsigned long ignore_me) ++{ ++ struct nt7506fb_par *par = info->par; ++ if ( _refresh ) { ++ nt7506fb_lcd_update(par); ++ } ++ ++ fb_timer.expires = jiffies + (HZ/_fps); ++ add_timer(&fb_timer); ++} ++ ++static int __init ++nt7506fb_probe(struct platform_device *dev) ++{ ++ int retval = -ENOMEM; ++ struct nt7506fb_par *par; ++ static unsigned char *videomemory; ++ static int videomemorysize; ++ int i; ++ ++ NT7506_init_lcd(DEFAULT_CONTRAST); ++ ++ videomemorysize = LCD_WIDTH * LCD_HEIGHT / 4; ++ ++ if (!(videomemory = kmalloc(videomemorysize,GFP_ATOMIC))) ++ goto failout; ++ memset(videomemory, 0, videomemorysize); ++ ++ info = framebuffer_alloc(sizeof(struct nt7506fb_par), &dev->dev); ++ ++ if (!info) ++ goto out_alloc; ++ info->screen_base = (char __iomem *)videomemory; ++ info->fbops = &nt7506fb_ops; ++ ++ info->var = nt7506fb_var; ++ info->fix = nt7506fb_fix; ++ info->fix.smem_start = (unsigned long)videomemory; ++ info->fix.smem_len = videomemorysize; ++ ++ par = info->par; ++ par->info = info; ++ ++ info->flags = FBINFO_FLAG_DEFAULT; ++ spin_lock_init(&par->lock); ++ platform_set_drvdata(dev, info); ++ ++#ifdef LCD_GRAYSCALE ++ /* Allocate cmap */ ++ retval = fb_alloc_cmap(&info->cmap, 4, 0); ++ if (retval < 0) { ++ printk(KERN_ERR "fb%d: Failed to allocate colormap\n", info->node); ++ goto out_register; ++ } ++ ++ /* Set cmap */ ++ for (i = 0; i < 4; i++) ++ info->cmap.red[i] = (((4*i)+1)*(0xFFFF))/16; ++ memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*4); ++ memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*4); ++#endif ++ ++ /* Register framebuffer */ ++ retval = register_framebuffer(info); ++ if (retval < 0) ++ goto out_register; ++ ++ init_timer(&fb_timer); ++ fb_timer.function = nt7506fb_refresh; ++ fb_timer.expires = jiffies + (HZ / _fps); ++ add_timer(&fb_timer); ++ ++ printk(KERN_INFO ++ "fb%d: nt7506 frame buffer device, using %dK of video memory\n", ++ info->node, videomemorysize >> 10); ++ ++ /* Initialize backlight and contrast control (do not abort driver if it fails) */ ++ nt7506fb_bl_init(par); ++ nt7506fb_lcd_init(par); ++ ++ return 0; ++ ++out_register: ++ framebuffer_release(info); ++out_alloc: ++ vfree(videomemory); ++failout: ++ return retval; ++} ++ ++static int nt7506fb_remove(struct platform_device *dev) ++{ ++ struct fb_info *info = platform_get_drvdata(dev); ++ ++ if (info) { ++ nt7506fb_lcd_exit(info->par); ++ nt7506fb_bl_exit(info); ++ unregister_framebuffer(info); ++ vfree((void __force *)info->screen_base); ++ framebuffer_release(info); ++ } ++ return 0; ++} ++ ++static struct platform_driver nt7506fb_driver = { ++ .probe = nt7506fb_probe, ++ .remove = nt7506fb_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ }, ++}; ++ ++static struct platform_device *nt7506fb_device; ++ ++static int __init nt7506fb_init(void) ++{ ++ int ret; ++ ++ ++ if (!(lcd_mem = request_mem_region(LCD_BASE, LCD_SIZE, "mpc8313-lcd"))) ++ return -ENOMEM; ++ ++ if (!(_lcd_io = ioremap(LCD_BASE, LCD_SIZE))) ++ { ++ release_mem_region(LCD_BASE, LCD_SIZE); ++ lcd_mem = NULL; ++ return -ENOMEM; ++ } ++ ret = platform_driver_register(&nt7506fb_driver); ++ ++ if (!ret) { ++ nt7506fb_device = platform_device_alloc(DRIVER_NAME, 0); ++ if (nt7506fb_device) ++ { ++ ret = platform_device_add(nt7506fb_device); ++ } ++ else ++ { ++ ret = -ENOMEM; ++ } ++ if (ret) ++ { ++ platform_device_put(nt7506fb_device); ++ platform_driver_unregister(&nt7506fb_driver); ++ } ++ ++ } ++ ++ ++ return ret; ++ ++} ++ ++ ++static void NT7506_init_lcd(char ael) ++{ ++ /* this resets the lcd*/ ++ char bl = _backlight ? LCD_BCKLIGH : LCD_BCKLIGHN; ++ ++ iowrite16(LCD_RSTN | LCD_ERD | bl, _lcd_io); ++ udelay(100); ++ iowrite16(LCD_RST| LCD_ERD | bl, _lcd_io); ++ udelay(200); ++ /* Soft reset*/ ++ NT7506_writeb_ctl(NT_RESET); ++ /* Disable ICON display*/ ++ NT7506_writeb_ctl(NT_ICON|OFF); ++ /* Sets the duty ratio 1/128*/ ++ NT7506_writeb_ctl(NT_DUTY); NT7506_writeb_ctl(DUTY_1_128); ++ /* Sets reverse direction between RAM column address and segment driver*/ ++ NT7506_writeb_ctl(NT_ADC_REV); ++ NT7506_writeb_ctl(NT_SHL_NOR); ++ /* Enales the built in Oscillator circuit.*/ ++ NT7506_writeb_ctl(NT_OSC); ++ /* Set Initial row to 0*/ ++ NT7506_writeb_ctl(NT_COM0); NT7506_writeb_ctl(0); ++ /* Sets DC-DC*/ ++ NT7506_writeb_ctl(NT_DCDC|TIME6); ++ /* Selects resistance ratio of the internal resistor*/ ++ NT7506_writeb_ctl(NT_REG_RES|RES_7_2); ++ /* set Reference Voltage mode*/ ++ NT7506_writeb_ctl(NT_ELEC_VOL); NT7506_writeb_ctl(ael); ++ /* Selects LCD bias ratio*/ ++ NT7506_writeb_ctl(NT_BIAS|BIAS_1_11); ++ ++ NT7506_writeb_ctl(NT_DATA_DIR); NT7506_writeb_ctl(0); ++ NT7506_writeb_ctl(NT_FRC_PWM|PWM15); ++ ++#ifdef LCD_GRAYSCALE ++ /* Feed grayscale palette */ ++ NT7506_writeb_ctl(NT_GRAY_SCALE | GRAY_WHITE_AB); ++ NT7506_writeb_ctl(0x00); ++ NT7506_writeb_ctl(NT_GRAY_SCALE | GRAY_WHITE_CD); ++ NT7506_writeb_ctl(0x00); ++ NT7506_writeb_ctl(NT_GRAY_SCALE | GRAY_LIGHT_AB); ++ NT7506_writeb_ctl(0x55); ++ NT7506_writeb_ctl(NT_GRAY_SCALE | GRAY_LIGHT_CD); ++ NT7506_writeb_ctl(0x55); ++ NT7506_writeb_ctl(NT_GRAY_SCALE | GRAY_DARK_AB); ++ NT7506_writeb_ctl(0xAA); ++ NT7506_writeb_ctl(NT_GRAY_SCALE | GRAY_DARK_CD); ++ NT7506_writeb_ctl(0xAA); ++ NT7506_writeb_ctl(NT_GRAY_SCALE | GRAY_BLACK_AB); ++ NT7506_writeb_ctl(0xFF); ++ NT7506_writeb_ctl(NT_GRAY_SCALE | GRAY_BLACK_CD); ++ NT7506_writeb_ctl(0xFF); ++#endif ++ ++ /* Select power circuit functions */ ++ NT7506_writeb_ctl(NT_POWER|VC); ++ udelay(5000); ++ NT7506_writeb_ctl(NT_POWER|VC|VR); ++ udelay(5000); ++ NT7506_writeb_ctl(NT_POWER|VC|VR|VF); ++ udelay(5000); ++ /* Reverses the display status on LCD panel */ ++ NT7506_writeb_ctl(NT_REV_DISP|OFF); ++ /* Forces the whole LCD points to be turned on regardless of the contents of the display data RAM*/ ++ NT7506_writeb_ctl(NT_DISP|ON); ++ /* Set Initial Start Line Address */ ++ NT7506_writeb_ctl(NT_START_LINE); NT7506_writeb_ctl(0x00); ++ _refresh=1; ++} ++ ++static void __exit nt7506fb_exit(void) ++{ ++ if (lcd_mem) ++ release_mem_region(LCD_BASE, LCD_SIZE); ++ lcd_mem = NULL; ++ platform_device_unregister(nt7506fb_device); ++ platform_driver_unregister(&nt7506fb_driver); ++} ++ ++module_param(tuhold, ulong, 0); ++MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to NT7506 board"); ++ ++module_init(nt7506fb_init); ++module_exit(nt7506fb_exit); ++ ++MODULE_DESCRIPTION("fbdev driver for Novatek NT7506 monochrome LCD board"); ++MODULE_AUTHOR("Alexandre Coffignal"); ++MODULE_LICENSE("GPL"); ++ +diff -urN linux-2.6.27.orig/include/linux/nt7506fb.h linux-2.6.27/include/linux/nt7506fb.h +--- linux-2.6.27.orig/include/linux/nt7506fb.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.27/include/linux/nt7506fb.h 2009-01-14 12:51:12.000000000 +0100 +@@ -0,0 +1,31 @@ ++ ++/* ++ * (C) Copyright 2008 ++ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++ ++#ifndef __LINUX_NT7506FB_H__ ++#define __LINUX_NT7506FB_H__ ++ ++#define FBIO_FRAMERATE _IOR('f', 1, char) ++ ++#endif diff --git a/packages/linux/linux-2.6.27/boc01/defconfig b/packages/linux/linux-2.6.27/boc01/defconfig index 60bf9b9000..0874015d95 100644 --- a/packages/linux/linux-2.6.27/boc01/defconfig +++ b/packages/linux/linux-2.6.27/boc01/defconfig @@ -1312,7 +1312,7 @@ CONFIG_FB_BACKLIGHT=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set -CONFIG_FB_NOVA=y +CONFIG_FB_NT7506=y # CONFIG_FB_OF is not set # CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set |