diff options
Diffstat (limited to 'packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12')
5 files changed, 0 insertions, 2984 deletions
diff --git a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/.mtn2git_empty b/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/defconfig-ipaqsa b/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/defconfig-ipaqsa deleted file mode 100644 index f144aa6c17..0000000000 --- a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/defconfig-ipaqsa +++ /dev/null @@ -1,1505 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_ARM=y -# CONFIG_EISA is not set -# CONFIG_SBUS is not set -# CONFIG_MCA is not set -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -# CONFIG_GENERIC_BUST_SPINLOCK is not set -# CONFIG_GENERIC_ISA_DMA is not set - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -# CONFIG_OBSOLETE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_ANAKIN is not set -# CONFIG_ARCH_ARCA5K is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_OMAHA is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_MX1ADS is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_RISCSTATION is not set -CONFIG_ARCH_SA1100=y -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_AT91RM9200DK is not set -# CONFIG_MINIMAL_OOPS is not set - -# -# Linux As Bootldr support -# -# CONFIG_LAB is not set -# CONFIG_BIG_KERNEL is not set -# CONFIG_USE_DATE_CODE is not set - -# -# Archimedes/A5000 Implementations -# - -# -# Archimedes/A5000 Implementations (select only ONE) -# -# CONFIG_ARCH_ARC is not set -# CONFIG_ARCH_A5K is not set - -# -# Footbridge Implementations -# -# CONFIG_ARCH_CATS is not set -# CONFIG_ARCH_PERSONAL_SERVER is not set -# CONFIG_ARCH_EBSA285_ADDIN is not set -# CONFIG_ARCH_EBSA285_HOST is not set -# CONFIG_ARCH_NETWINDER is not set - -# -# SA11x0 Implementations -# -# CONFIG_SA1100_ACCELENT is not set -# CONFIG_SA1100_ASSABET is not set -# CONFIG_ASSABET_NEPONSET is not set -# CONFIG_SA1100_ADSBITSY is not set -# CONFIG_SA1100_BRUTUS is not set -# CONFIG_SA1100_CEP is not set -# CONFIG_SA1100_CERF is not set -CONFIG_SA1100_H3100=y -CONFIG_SA1100_H3600=y -CONFIG_SA1100_H3800=y -# CONFIG_SA1100_CONSUS is not set -# CONFIG_SA1100_EXTENEX1 is not set -# CONFIG_SA1100_FLEXANET is not set -# CONFIG_SA1100_FREEBIRD is not set -# CONFIG_SA1100_FRODO is not set -# CONFIG_SA1100_GRAPHICSCLIENT is not set -# CONFIG_SA1100_GRAPHICSMASTER is not set -# CONFIG_SA1100_HACKKIT is not set -# CONFIG_SA1100_BADGE4 is not set -# CONFIG_SA1100_JORNADA720 is not set -# CONFIG_SA1100_JORNADA56X is not set -# CONFIG_SA1100_HUW_WEBPANEL is not set -# CONFIG_SA1100_ITSY is not set -# CONFIG_SA1100_LART is not set -# CONFIG_SA1100_NANOENGINE is not set -# CONFIG_SA1100_OMNIMETER is not set -# CONFIG_SA1100_PANGOLIN is not set -# CONFIG_SA1100_PLEB is not set -# CONFIG_SA1100_PT_SYSTEM3 is not set -# CONFIG_SA1100_SHANNON is not set -# CONFIG_SA1100_SHERMAN is not set -# CONFIG_SA1100_SIMPAD is not set -# CONFIG_SA1100_SIMPUTER is not set -# CONFIG_SA1100_PFS168 is not set -# CONFIG_SA1100_VICTOR is not set -# CONFIG_SA1100_XP860 is not set -# CONFIG_SA1100_YOPY is not set -CONFIG_SA1100_USB=m -CONFIG_SA1100_USB_NETLINK=m -CONFIG_SA1100_USB_CHAR=m -CONFIG_REGISTERS=m - -# -# Intel PXA250/210 Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_ARCH_PXA_IDP is not set -# CONFIG_ARCH_PXA_CERF is not set -# CONFIG_ARCH_H3900 is not set -# CONFIG_ARCH_H1900 is not set -# CONFIG_ARCH_H5400 is not set -# CONFIG_ARCH_H2200 is not set -# CONFIG_ARCH_AXIM is not set -# CONFIG_PXA_USB is not set -# CONFIG_PXA_USB_NETLINK is not set -# CONFIG_PXA_USB_CHAR is not set - -# -# CLPS711X/EP721X Implementations -# -# CONFIG_ARCH_AUTCPU12 is not set -# CONFIG_ARCH_CDB89712 is not set -# CONFIG_ARCH_CLEP7312 is not set -# CONFIG_ARCH_EDB7211 is not set -# CONFIG_ARCH_P720T is not set -# CONFIG_ARCH_FORTUNET is not set -# CONFIG_ARCH_EP7211 is not set -# CONFIG_ARCH_EP7212 is not set -# CONFIG_ARCH_ACORN is not set -# CONFIG_FOOTBRIDGE is not set -# CONFIG_FOOTBRIDGE_HOST is not set -# CONFIG_FOOTBRIDGE_ADDIN is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -# CONFIG_CPU_26 is not set -# CONFIG_CPU_ARM610 is not set -# CONFIG_CPU_ARM710 is not set -# CONFIG_CPU_ARM720T is not set -# CONFIG_CPU_ARM920T is not set -# CONFIG_CPU_ARM922T is not set -# CONFIG_PLD is not set -# CONFIG_CPU_ARM926T is not set -# CONFIG_CPU_ARM1020 is not set -# CONFIG_CPU_ARM1026 is not set -# CONFIG_CPU_SA110 is not set -CONFIG_CPU_SA1100=y -# CONFIG_CPU_32v3 is not set -CONFIG_CPU_32v4=y -CONFIG_SA1100_IPAQ=y -# CONFIG_PXA_IPAQ is not set -CONFIG_IPAQ_HANDHELD=y - -# -# Compaq iPAQ Handheld -# -CONFIG_IPAQ_HAL=m -CONFIG_H3600_MICRO=m -CONFIG_IPAQ_HAS_ROSELLA=y -CONFIG_H3600_ASIC=m -CONFIG_H3900_ASIC_DEBUG=y -# CONFIG_H5400_ASIC is not set -# CONFIG_H1900_ASIC is not set -# CONFIG_H1900_TS is not set -CONFIG_H3600_HARDWARE=y -CONFIG_IPAQ_SLEEVE=m -CONFIG_SLEEVE_DEBUG=y -CONFIG_SLEEVE_DEBUG_VERBOSE=0 -# CONFIG_SLEEVE_IRQ_DEMUX is not set - -# -# Processor Features -# -CONFIG_DISCONTIGMEM=y - -# -# General setup -# -# CONFIG_PCI is not set -CONFIG_ISA=y -# CONFIG_ISA_DMA is not set -# CONFIG_ZBOOT_ROM is not set -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_CPU_FREQ=y -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -# CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -# CONFIG_PCMCIA_CLPS6700 is not set -CONFIG_PCMCIA_SA1100=m -# CONFIG_PCMCIA_PXA is not set -CONFIG_MERCURY_BACKPAQ=m - -# -# MMC/SD Card support -# -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_MMC_DEBUG_VERBOSE=0 -CONFIG_NET=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y - -# -# At least one math emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_FASTFPE is not set -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PM=y -CONFIG_APM=m -CONFIG_HWTIMER=m -# CONFIG_ARTHUR is not set -CONFIG_CMDLINE="keepinitrd" -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_B1 is not set -CONFIG_MTD_CFI_B2=y -CONFIG_MTD_CFI_B4=y -# CONFIG_MTD_CFI_B8 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_AMDSTD is not set -# CONFIG_MTD_SHARP is not set -# CONFIG_MTD_JEDEC is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_IPAQ=y -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_CDB89712 is not set -# CONFIG_MTD_SA1100 is not set -# CONFIG_MTD_DC21285 is not set -# CONFIG_MTD_IQ80310 is not set -# CONFIG_MTD_LUBBOCK is not set -# CONFIG_MTD_EPXA10DB is not set -# CONFIG_MTD_FORTUNET is not set -# CONFIG_MTD_AUTCPU12 is not set -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_H720X is not set -# CONFIG_MTD_IMPA7 is not set -# CONFIG_MTD_CEIVA is not set -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PCMCIA is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLKMTD=m - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_DOCPROBE is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Plug and Play configuration -# -# CONFIG_PNP is not set -# CONFIG_ISAPNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_CISS_SCSI_TAPE is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_NVRD=m - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_LVM=m -CONFIG_BLK_DEV_DM=m - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_FILTER=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_TFTP is not set -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -# CONFIG_IP_NF_MATCH_HELPER is not set -CONFIG_IP_NF_MATCH_STATE=m -# CONFIG_IP_NF_MATCH_CONNTRACK is not set -# CONFIG_IP_NF_MATCH_UNCLEAN is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -CONFIG_IP_NF_FILTER=m -# CONFIG_IP_NF_TARGET_REJECT is not set -# CONFIG_IP_NF_TARGET_MIRROR is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_NAT_LOCAL is not set -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -# CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_DSCP is not set -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -# CONFIG_IP_NF_ARPTABLES is not set -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_IPV6=m -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_IPV6_TUNNEL=m -CONFIG_IPV6_MOBILITY=m -CONFIG_IPV6_MOBILITY_MN=m -# CONFIG_IPV6_MOBILITY_HA is not set -CONFIG_IPV6_MOBILITY_DEBUG=y - -# -# IPv6: Netfilter Configuration -# -# CONFIG_IP6_NF_QUEUE is not set -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -# CONFIG_IP6_NF_MATCH_RT is not set -# CONFIG_IP6_NF_MATCH_OPTS is not set -# CONFIG_IP6_NF_MATCH_FRAG is not set -# CONFIG_IP6_NF_MATCH_HL is not set -CONFIG_IP6_NF_MATCH_MULTIPORT=m -# CONFIG_IP6_NF_MATCH_OWNER is not set -CONFIG_IP6_NF_MATCH_MARK=m -# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set -# CONFIG_IP6_NF_MATCH_AHESP is not set -# CONFIG_IP6_NF_MATCH_LENGTH is not set -# CONFIG_IP6_NF_MATCH_EUI64 is not set -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set - -# -# -# -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -CONFIG_BRIDGE=m -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_IPSEC=m - -# -# IPSec options (FreeS/WAN) -# -CONFIG_IPSEC_IPIP=y -CONFIG_IPSEC_AH=y -CONFIG_IPSEC_AUTH_HMAC_MD5=y -CONFIG_IPSEC_AUTH_HMAC_SHA1=y -CONFIG_IPSEC_ESP=y -CONFIG_IPSEC_ENC_3DES=y -CONFIG_IPSEC_IPCOMP=y -CONFIG_IPSEC_DEBUG=y - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_MYRI_SBUS is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_HERMES is not set -# CONFIG_SPECTRUM24T is not set - -# -# Wireless Pcmcia cards support -# -# CONFIG_PCMCIA_HERMES is not set -# CONFIG_AIRO_CS is not set -# CONFIG_WVLAN_CS is not set -# CONFIG_MWVLAN_CS is not set -# CONFIG_HOSTAP is not set -# CONFIG_HOSTAP_CS is not set -CONFIG_NET_WIRELESS=y -CONFIG_ATMELWLAN=y -# CONFIG_ATMELWLAN_USB_503A_RFMD is not set -CONFIG_ATMELWLAN_PCMCIA_502A=m -CONFIG_ATMELWLAN_PCMCIA_3COM=m -CONFIG_ATMELWLAN_PCMCIA_502AD=m -CONFIG_ATMELWLAN_PCMCIA_502AE=m -CONFIG_ATMELWLAN_PCMCIA_504=m - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -# CONFIG_PCMCIA_IBMTR is not set -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -# CONFIG_AIRONET4500_CS is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_NSC_FIR is not set -# CONFIG_WINBOND_FIR is not set -# CONFIG_TOSHIBA_FIR is not set -# CONFIG_SMC_IRCC_FIR is not set -# CONFIG_ALI_FIR is not set -# CONFIG_VLSI_FIR is not set -CONFIG_SA1100_FIR=m - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_IDEDISK_STROKE is not set -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=m -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -# CONFIG_BLK_DEV_ISAPNP is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_DMA_NONPCI is not set -# CONFIG_BLK_DEV_IDE_MODES is not set -# CONFIG_BLK_DEV_ATARAID is not set -# CONFIG_BLK_DEV_ATARAID_PDC is not set -# CONFIG_BLK_DEV_ATARAID_HPT is not set - -# -# SCSI support -# -CONFIG_SCSI=m - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_DEBUG_QUEUES is not set -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AHA1740 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_DMA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_NCR53C7xx is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SIM710 is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input core support -# -CONFIG_INPUT=m -CONFIG_INPUT_KEYBDEV=m -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_UINPUT=m - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_ANAKIN is not set -# CONFIG_SERIAL_ANAKIN_CONSOLE is not set -# CONFIG_SERIAL_S3C2410 is not set -# CONFIG_SERIAL_S3C2410_CONSOLE is not set -# CONFIG_SERIAL_AMBA is not set -# CONFIG_SERIAL_AMBA_CONSOLE is not set -# CONFIG_SERIAL_CLPS711X is not set -# CONFIG_SERIAL_CLPS711X_CONSOLE is not set -# CONFIG_SERIAL_21285 is not set -# CONFIG_SERIAL_21285_OLD is not set -# CONFIG_SERIAL_21285_CONSOLE is not set -# CONFIG_SERIAL_UART00 is not set -# CONFIG_SERIAL_UART00_CONSOLE is not set -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_SA1100_DEFAULT_BAUDRATE=115200 -CONFIG_SERIAL_H3800_ASIC=m -# CONFIG_SERIAL_SIR_PXA is not set -# CONFIG_SERIAL_8250 is not set -# CONFIG_SERIAL_8250_CONSOLE is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_SHARE_IRQ is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set -# CONFIG_SERIAL_8250_HUB6 is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=32 -CONFIG_NEWTONKBD=m -CONFIG_SA1100_PROFILER=m - -# -# Compaq iPAQ H3600 support -# -CONFIG_TOUCHSCREEN_H3600=m -CONFIG_H3600_BACKPAQ_FPGA=m -CONFIG_H3600_BACKPAQ_ACCEL=m -CONFIG_H3600_BACKPAQ_GASGAUGE=m -CONFIG_H3600_BACKPAQ_SRAM=m -CONFIG_H3600_BACKPAQ_AUDIO=m -CONFIG_H3600_STOWAWAY=m -CONFIG_H3800_MICROKBD=m -CONFIG_SA1100_LIRC=m -# CONFIG_H5400_BUZZER is not set -# CONFIG_H5400_FSI is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# L3 serial bus support -# -CONFIG_L3=y -CONFIG_L3_ALGOBIT=y -CONFIG_L3_BIT_SA1100_GPIO=y - -# -# Other L3 adapters -# -# CONFIG_L3_S3C2410 is not set -# CONFIG_L3_SA1111 is not set -CONFIG_L3_BACKPAQ=m -CONFIG_BIT_SA1100_GPIO=y - -# -# SPI support -# -# CONFIG_SPI is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=m -# CONFIG_PSMOUSE is not set -# CONFIG_82C710_MOUSE is not set -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -CONFIG_INPUT_SERIO=m -CONFIG_INPUT_SERPORT=m - -# -# Joysticks -# -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -# CONFIG_ACQUIRE_WDT is not set -# CONFIG_ADVANTECH_WDT is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_SC520_WDT is not set -# CONFIG_PCWATCHDOG is not set -# CONFIG_21285_WATCHDOG is not set -# CONFIG_977_WATCHDOG is not set -CONFIG_SA1100_WATCHDOG=m -# CONFIG_PXA_WATCHDOG is not set -# CONFIG_OMAHA_WATCHDOG is not set -# CONFIG_EUROTECH_WDT is not set -# CONFIG_IB700_WDT is not set -# CONFIG_WAFER_WDT is not set -# CONFIG_I810_TCO is not set -# CONFIG_MIXCOMWD is not set -# CONFIG_60XX_WDT is not set -# CONFIG_SC1200_WDT is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_W83877F_WDT is not set -# CONFIG_WDT is not set -# CONFIG_WDTPCI is not set -# CONFIG_MACHZ_WDT is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -CONFIG_SA1100_RTC=m -# CONFIG_PXA_RTC_HACK is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -# CONFIG_PCMCIA_MOBILISCAN_CS is not set -# CONFIG_AXIM_KEY_FIX is not set - -# -# Multimedia devices -# -CONFIG_MEDIA=m -CONFIG_VIDEO_DEV=m -CONFIG_V4L2_DEV=m - -# -# Video For Linux -# -CONFIG_VIDEO_PROC_FS=y -# CONFIG_I2C_PARPORT is not set - -# -# Video Adapters -# -# CONFIG_VIDEO_PMS is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_STRADIS is not set -# CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIDEO_ZORAN_BUZ is not set -# CONFIG_VIDEO_ZORAN_DC10 is not set -# CONFIG_VIDEO_ZORAN_LML33 is not set -# CONFIG_VIDEO_ZR36120 is not set -# CONFIG_VIDEO_MEYE is not set -# CONFIG_VIDEO_CYBERPRO is not set -CONFIG_VIDEO_H3600_BACKPAQ=m -# CONFIG_VIDEO_HAWKEYE is not set - -# -# Video for Linux 2 (V4L2) -# -CONFIG_VIDEO_WINNOV_CS=m - -# -# Radio Adapters -# -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set -# CONFIG_RADIO_MIROPCM20 is not set -# CONFIG_RADIO_MIROPCM20_RDS is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_ADFS_FS is not set -# CONFIG_ADFS_FS_RW is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BFS_FS is not set -CONFIG_EXT3_FS=m -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -CONFIG_CRAMFS=y -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=m -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_NTFS_FS is not set -# CONFIG_NTFS_RW is not set -# CONFIG_HPFS_FS is not set -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DRIVERFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=m -# CONFIG_SYSV_FS is not set -# CONFIG_UDF_FS is not set -# CONFIG_UDF_RW is not set -# CONFIG_UFS_FS is not set -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_ZISOFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_PC_KEYMAP=y -# CONFIG_VGA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_ACORN is not set -# CONFIG_FB_ANAKIN is not set -# CONFIG_FB_CLPS711X is not set -# CONFIG_FB_S3C2410 is not set -CONFIG_FB_SA1100=y -# CONFIG_FB_EPSON1356 is not set -# CONFIG_FB_MQ200 is not set -# CONFIG_FB_PXA is not set -# CONFIG_FB_MQ1100 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_ADVANCED=y -# CONFIG_FBCON_MFB is not set -# CONFIG_FBCON_CFB2 is not set -CONFIG_FBCON_CFB4=y -# CONFIG_FBCON_CFB8 is not set -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_CFB24 is not set -# CONFIG_FBCON_CFB32 is not set -# CONFIG_FBCON_AFB is not set -# CONFIG_FBCON_ILBM is not set -# CONFIG_FBCON_IPLAN2P2 is not set -# CONFIG_FBCON_IPLAN2P4 is not set -# CONFIG_FBCON_IPLAN2P8 is not set -# CONFIG_FBCON_MAC is not set -# CONFIG_FBCON_VGA_PLANES is not set -# CONFIG_FBCON_VGA is not set -# CONFIG_FBCON_HGA is not set -# CONFIG_FBCON_NO_LOGO is not set -CONFIG_FBCON_FONTWIDTH8_ONLY=y -CONFIG_FBCON_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set - -# -# Sound -# -CONFIG_SOUND=y -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_CMPCI is not set -# CONFIG_SOUND_EMU10K1 is not set -# CONFIG_MIDI_EMU10K1 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_ES1370 is not set -# CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ESSSOLO1 is not set -# CONFIG_SOUND_MAESTRO is not set -# CONFIG_SOUND_MAESTRO3 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_RME96XX is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_SA1100=m -CONFIG_SOUND_UDA1341=m -# CONFIG_SOUND_SA1100_MONO is not set -# CONFIG_SOUND_ASSABET_UDA1341 is not set -CONFIG_SOUND_H3600_UDA1341=m -# CONFIG_SOUND_PANGOLIN_UDA1341 is not set -# CONFIG_SOUND_SA1111_UDA1341 is not set -# CONFIG_SOUND_SA1100SSP is not set -# CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_VIDC is not set -# CONFIG_SOUND_WAVEARTIST is not set -# CONFIG_SOUND_PXA_AC97 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# Multimedia Capabilities Port drivers -# -# CONFIG_MCP is not set -# CONFIG_MCP_SA1100 is not set -# CONFIG_MCP_UCB1200 is not set -# CONFIG_MCP_UCB1200_AUDIO is not set -# CONFIG_MCP_UCB1200_TS is not set -# CONFIG_MCP_UCB1400_TS is not set - -# -# Console Switches -# -# CONFIG_SWITCHES is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_UHCI is not set -# CONFIG_USB_UHCI_ALT is not set -# CONFIG_USB_OHCI is not set -# CONFIG_USB_OHCI_SA1111 is not set -# CONFIG_USB_OHCI_H5400 is not set -# CONFIG_USB_OHCI_S3C2410 is not set -CONFIG_USB_SL811HS=m - -# -# USB Device Class drivers -# -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=m - -# -# USB Human Interface Devices (HID) -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_WACOM is not set - -# -# USB Imaging devices -# -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# -CONFIG_USB_IBMCAM=m -CONFIG_USB_OV511=m -CONFIG_USB_PWC=m -CONFIG_USB_SE401=m -CONFIG_USB_STV680=m -CONFIG_USB_VICAM=m -# CONFIG_USB_DSBR is not set -# CONFIG_USB_DABUSB is not set - -# -# USB Network adaptors -# -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_CATC is not set -CONFIG_USB_CDCETHER=m -# CONFIG_USB_USBNET is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_BRLVGER is not set - -# -# Linux As Bootldr Modules -# -# CONFIG_BIG_KERNEL is not set -# CONFIG_USE_DATE_CODE is not set -# CONFIG_YMODEM is not set -# CONFIG_LAB_DUMMY is not set -# CONFIG_LAB_CRC is not set -# CONFIG_LAB_YMODEM is not set -# CONFIG_LAB_MTD is not set -# CONFIG_LAB_COPY is not set -# CONFIG_LAB_COPY_YMODEM is not set -# CONFIG_LAB_COPY_FLASH is not set -# CONFIG_LAB_COPY_FS is not set -# CONFIG_LAB_COPY_WRAPPER is not set - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -CONFIG_BLUEZ_RFCOMM=m -CONFIG_BLUEZ_RFCOMM_TTY=y -CONFIG_BLUEZ_BNEP=m -CONFIG_BLUEZ_BNEP_MC_FILTER=y -CONFIG_BLUEZ_BNEP_PROTO_FILTER=y - -# -# Bluetooth device drivers -# -# CONFIG_BLUEZ_HCIUSB is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -CONFIG_BLUEZ_HCIUART_BCSP=y -# CONFIG_BLUEZ_HCIUART_BCSP_TXCRC is not set -# CONFIG_BLUEZ_HCIBFUSB is not set -CONFIG_BLUEZ_HCIDTL1=m -CONFIG_BLUEZ_HCIBT3C=m -CONFIG_BLUEZ_HCIBLUECARD=m -CONFIG_BLUEZ_HCIBTUART=m -# CONFIG_BLUEZ_HCIVHCI is not set - -# -# Kernel hacking -# -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_NO_PGT_CACHE is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SLAB is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_WAITQ is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set -# CONFIG_DEBUG_DC21285_PORT is not set -# CONFIG_DEBUG_CLPS711X_UART2 is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/disable-pcmcia-probe.patch b/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/disable-pcmcia-probe.patch deleted file mode 100644 index 79ba036323..0000000000 --- a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/disable-pcmcia-probe.patch +++ /dev/null @@ -1,17 +0,0 @@ - -# -# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher -# - ---- linux/drivers/pcmcia/Config.in~disable-pcmcia-probe 2003-05-13 11:18:23.000000000 +0200 -+++ linux/drivers/pcmcia/Config.in 2004-05-27 13:59:50.000000000 +0200 -@@ -15,9 +15,6 @@ - tristate 'PCMCIA/CardBus support' CONFIG_PCMCIA - if [ "$CONFIG_PCMCIA" != "n" ]; then - # yes, I really mean the following... -- if [ "$CONFIG_ISA" = "y" -o "$CONFIG_ARCH_SA1100" = "y" ]; then -- define_bool CONFIG_PCMCIA_PROBE y -- fi - if [ "$CONFIG_PCI" != "n" ]; then - bool ' CardBus support' CONFIG_CARDBUS - fi diff --git a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/ipsec.patch b/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/ipsec.patch deleted file mode 100644 index 545175b7fc..0000000000 --- a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/ipsec.patch +++ /dev/null @@ -1,1446 +0,0 @@ ---- linux/net/Makefile 3 Dec 2003 19:15:16 -0000 1.25 -+++ linux/net/Makefile 20 Feb 2003 15:50:38 -0000 1.24 -@@ -19,6 +19,7 @@ - subdir-$(CONFIG_NETFILTER) += ipv4/netfilter - subdir-$(CONFIG_UNIX) += unix - subdir-$(CONFIG_IPV6) += ipv6 -+subdir-$(CONFIG_IPSEC) += ipsec - - ifneq ($(CONFIG_IPV6),n) - ifneq ($(CONFIG_IPV6),) ---- /dev/null 2004-02-02 20:32:13.000000000 +0000 -+++ linux/include/zlib/zlib.h 2004-07-05 23:56:59.000000000 +0100 -@@ -0,0 +1,893 @@ -+/* zlib.h -- interface of the 'zlib' general purpose compression library -+ version 1.1.4, March 11th, 2002 -+ -+ Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler -+ -+ This software is provided 'as-is', without any express or implied -+ warranty. In no event will the authors be held liable for any damages -+ arising from the use of this software. -+ -+ Permission is granted to anyone to use this software for any purpose, -+ including commercial applications, and to alter it and redistribute it -+ freely, subject to the following restrictions: -+ -+ 1. The origin of this software must not be misrepresented; you must not -+ claim that you wrote the original software. If you use this software -+ in a product, an acknowledgment in the product documentation would be -+ appreciated but is not required. -+ 2. Altered source versions must be plainly marked as such, and must not be -+ misrepresented as being the original software. -+ 3. This notice may not be removed or altered from any source distribution. -+ -+ Jean-loup Gailly Mark Adler -+ jloup@gzip.org madler@alumni.caltech.edu -+ -+ -+ The data format used by the zlib library is described by RFCs (Request for -+ Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt -+ (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -+*/ -+ -+#ifndef _ZLIB_H -+#define _ZLIB_H -+ -+#include "zconf.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define ZLIB_VERSION "1.1.4" -+ -+/* -+ The 'zlib' compression library provides in-memory compression and -+ decompression functions, including integrity checks of the uncompressed -+ data. This version of the library supports only one compression method -+ (deflation) but other algorithms will be added later and will have the same -+ stream interface. -+ -+ Compression can be done in a single step if the buffers are large -+ enough (for example if an input file is mmap'ed), or can be done by -+ repeated calls of the compression function. In the latter case, the -+ application must provide more input and/or consume the output -+ (providing more output space) before each call. -+ -+ The library also supports reading and writing files in gzip (.gz) format -+ with an interface similar to that of stdio. -+ -+ The library does not install any signal handler. The decoder checks -+ the consistency of the compressed data, so the library should never -+ crash even in case of corrupted input. -+*/ -+ -+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -+typedef void (*free_func) OF((voidpf opaque, voidpf address)); -+ -+struct internal_state; -+ -+typedef struct z_stream_s { -+ Bytef *next_in; /* next input byte */ -+ uInt avail_in; /* number of bytes available at next_in */ -+ uLong total_in; /* total nb of input bytes read so far */ -+ -+ Bytef *next_out; /* next output byte should be put there */ -+ uInt avail_out; /* remaining free space at next_out */ -+ uLong total_out; /* total nb of bytes output so far */ -+ -+ const char *msg; /* last error message, NULL if no error */ -+ struct internal_state FAR *state; /* not visible by applications */ -+ -+ alloc_func zalloc; /* used to allocate the internal state */ -+ free_func zfree; /* used to free the internal state */ -+ voidpf opaque; /* private data object passed to zalloc and zfree */ -+ -+ int data_type; /* best guess about the data type: ascii or binary */ -+ uLong adler; /* adler32 value of the uncompressed data */ -+ uLong reserved; /* reserved for future use */ -+} z_stream; -+ -+typedef z_stream FAR *z_streamp; -+ -+/* -+ The application must update next_in and avail_in when avail_in has -+ dropped to zero. It must update next_out and avail_out when avail_out -+ has dropped to zero. The application must initialize zalloc, zfree and -+ opaque before calling the init function. All other fields are set by the -+ compression library and must not be updated by the application. -+ -+ The opaque value provided by the application will be passed as the first -+ parameter for calls of zalloc and zfree. This can be useful for custom -+ memory management. The compression library attaches no meaning to the -+ opaque value. -+ -+ zalloc must return Z_NULL if there is not enough memory for the object. -+ If zlib is used in a multi-threaded application, zalloc and zfree must be -+ thread safe. -+ -+ On 16-bit systems, the functions zalloc and zfree must be able to allocate -+ exactly 65536 bytes, but will not be required to allocate more than this -+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, -+ pointers returned by zalloc for objects of exactly 65536 bytes *must* -+ have their offset normalized to zero. The default allocation function -+ provided by this library ensures this (see zutil.c). To reduce memory -+ requirements and avoid any allocation of 64K objects, at the expense of -+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). -+ -+ The fields total_in and total_out can be used for statistics or -+ progress reports. After compression, total_in holds the total size of -+ the uncompressed data and may be saved for use in the decompressor -+ (particularly if the decompressor wants to decompress everything in -+ a single step). -+*/ -+ -+ /* constants */ -+ -+#define Z_NO_FLUSH 0 -+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ -+#define Z_SYNC_FLUSH 2 -+#define Z_FULL_FLUSH 3 -+#define Z_FINISH 4 -+/* Allowed flush values; see deflate() below for details */ -+ -+#define Z_OK 0 -+#define Z_STREAM_END 1 -+#define Z_NEED_DICT 2 -+#define Z_ERRNO (-1) -+#define Z_STREAM_ERROR (-2) -+#define Z_DATA_ERROR (-3) -+#define Z_MEM_ERROR (-4) -+#define Z_BUF_ERROR (-5) -+#define Z_VERSION_ERROR (-6) -+/* Return codes for the compression/decompression functions. Negative -+ * values are errors, positive values are used for special but normal events. -+ */ -+ -+#define Z_NO_COMPRESSION 0 -+#define Z_BEST_SPEED 1 -+#define Z_BEST_COMPRESSION 9 -+#define Z_DEFAULT_COMPRESSION (-1) -+/* compression levels */ -+ -+#define Z_FILTERED 1 -+#define Z_HUFFMAN_ONLY 2 -+#define Z_DEFAULT_STRATEGY 0 -+/* compression strategy; see deflateInit2() below for details */ -+ -+#define Z_BINARY 0 -+#define Z_ASCII 1 -+#define Z_UNKNOWN 2 -+/* Possible values of the data_type field */ -+ -+#define Z_DEFLATED 8 -+/* The deflate compression method (the only one supported in this version) */ -+ -+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ -+ -+#define zlib_version zlibVersion() -+/* for compatibility with versions < 1.0.2 */ -+ -+ /* basic functions */ -+ -+ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -+/* The application can compare zlibVersion and ZLIB_VERSION for consistency. -+ If the first character differs, the library code actually used is -+ not compatible with the zlib.h header file used by the application. -+ This check is automatically made by deflateInit and inflateInit. -+ */ -+ -+/* -+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); -+ -+ Initializes the internal stream state for compression. The fields -+ zalloc, zfree and opaque must be initialized before by the caller. -+ If zalloc and zfree are set to Z_NULL, deflateInit updates them to -+ use default allocation functions. -+ -+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: -+ 1 gives best speed, 9 gives best compression, 0 gives no compression at -+ all (the input data is simply copied a block at a time). -+ Z_DEFAULT_COMPRESSION requests a default compromise between speed and -+ compression (currently equivalent to level 6). -+ -+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not -+ enough memory, Z_STREAM_ERROR if level is not a valid compression level, -+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible -+ with the version assumed by the caller (ZLIB_VERSION). -+ msg is set to null if there is no error message. deflateInit does not -+ perform any compression: this will be done by deflate(). -+*/ -+ -+ -+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); -+/* -+ deflate compresses as much data as possible, and stops when the input -+ buffer becomes empty or the output buffer becomes full. It may introduce some -+ output latency (reading input without producing any output) except when -+ forced to flush. -+ -+ The detailed semantics are as follows. deflate performs one or both of the -+ following actions: -+ -+ - Compress more input starting at next_in and update next_in and avail_in -+ accordingly. If not all input can be processed (because there is not -+ enough room in the output buffer), next_in and avail_in are updated and -+ processing will resume at this point for the next call of deflate(). -+ -+ - Provide more output starting at next_out and update next_out and avail_out -+ accordingly. This action is forced if the parameter flush is non zero. -+ Forcing flush frequently degrades the compression ratio, so this parameter -+ should be set only when necessary (in interactive applications). -+ Some output may be provided even if flush is not set. -+ -+ Before the call of deflate(), the application should ensure that at least -+ one of the actions is possible, by providing more input and/or consuming -+ more output, and updating avail_in or avail_out accordingly; avail_out -+ should never be zero before the call. The application can consume the -+ compressed output when it wants, for example when the output buffer is full -+ (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK -+ and with zero avail_out, it must be called again after making room in the -+ output buffer because there might be more output pending. -+ -+ If the parameter flush is set to Z_SYNC_FLUSH, all pending output is -+ flushed to the output buffer and the output is aligned on a byte boundary, so -+ that the decompressor can get all input data available so far. (In particular -+ avail_in is zero after the call if enough output space has been provided -+ before the call.) Flushing may degrade compression for some compression -+ algorithms and so it should be used only when necessary. -+ -+ If flush is set to Z_FULL_FLUSH, all output is flushed as with -+ Z_SYNC_FLUSH, and the compression state is reset so that decompression can -+ restart from this point if previous compressed data has been damaged or if -+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade -+ the compression. -+ -+ If deflate returns with avail_out == 0, this function must be called again -+ with the same value of the flush parameter and more output space (updated -+ avail_out), until the flush is complete (deflate returns with non-zero -+ avail_out). -+ -+ If the parameter flush is set to Z_FINISH, pending input is processed, -+ pending output is flushed and deflate returns with Z_STREAM_END if there -+ was enough output space; if deflate returns with Z_OK, this function must be -+ called again with Z_FINISH and more output space (updated avail_out) but no -+ more input data, until it returns with Z_STREAM_END or an error. After -+ deflate has returned Z_STREAM_END, the only possible operations on the -+ stream are deflateReset or deflateEnd. -+ -+ Z_FINISH can be used immediately after deflateInit if all the compression -+ is to be done in a single step. In this case, avail_out must be at least -+ 0.1% larger than avail_in plus 12 bytes. If deflate does not return -+ Z_STREAM_END, then it must be called again as described above. -+ -+ deflate() sets strm->adler to the adler32 checksum of all input read -+ so far (that is, total_in bytes). -+ -+ deflate() may update data_type if it can make a good guess about -+ the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered -+ binary. This field is only for information purposes and does not affect -+ the compression algorithm in any manner. -+ -+ deflate() returns Z_OK if some progress has been made (more input -+ processed or more output produced), Z_STREAM_END if all input has been -+ consumed and all output has been produced (only when flush is set to -+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example -+ if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible -+ (for example avail_in or avail_out was zero). -+*/ -+ -+ -+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); -+/* -+ All dynamically allocated data structures for this stream are freed. -+ This function discards any unprocessed input and does not flush any -+ pending output. -+ -+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the -+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed -+ prematurely (some input or output was discarded). In the error case, -+ msg may be set but then points to a static string (which must not be -+ deallocated). -+*/ -+ -+ -+/* -+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); -+ -+ Initializes the internal stream state for decompression. The fields -+ next_in, avail_in, zalloc, zfree and opaque must be initialized before by -+ the caller. If next_in is not Z_NULL and avail_in is large enough (the exact -+ value depends on the compression method), inflateInit determines the -+ compression method from the zlib header and allocates all data structures -+ accordingly; otherwise the allocation will be deferred to the first call of -+ inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to -+ use default allocation functions. -+ -+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough -+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the -+ version assumed by the caller. msg is set to null if there is no error -+ message. inflateInit does not perform any decompression apart from reading -+ the zlib header if present: this will be done by inflate(). (So next_in and -+ avail_in may be modified, but next_out and avail_out are unchanged.) -+*/ -+ -+ -+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); -+/* -+ inflate decompresses as much data as possible, and stops when the input -+ buffer becomes empty or the output buffer becomes full. It may some -+ introduce some output latency (reading input without producing any output) -+ except when forced to flush. -+ -+ The detailed semantics are as follows. inflate performs one or both of the -+ following actions: -+ -+ - Decompress more input starting at next_in and update next_in and avail_in -+ accordingly. If not all input can be processed (because there is not -+ enough room in the output buffer), next_in is updated and processing -+ will resume at this point for the next call of inflate(). -+ -+ - Provide more output starting at next_out and update next_out and avail_out -+ accordingly. inflate() provides as much output as possible, until there -+ is no more input data or no more space in the output buffer (see below -+ about the flush parameter). -+ -+ Before the call of inflate(), the application should ensure that at least -+ one of the actions is possible, by providing more input and/or consuming -+ more output, and updating the next_* and avail_* values accordingly. -+ The application can consume the uncompressed output when it wants, for -+ example when the output buffer is full (avail_out == 0), or after each -+ call of inflate(). If inflate returns Z_OK and with zero avail_out, it -+ must be called again after making room in the output buffer because there -+ might be more output pending. -+ -+ If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much -+ output as possible to the output buffer. The flushing behavior of inflate is -+ not specified for values of the flush parameter other than Z_SYNC_FLUSH -+ and Z_FINISH, but the current implementation actually flushes as much output -+ as possible anyway. -+ -+ inflate() should normally be called until it returns Z_STREAM_END or an -+ error. However if all decompression is to be performed in a single step -+ (a single call of inflate), the parameter flush should be set to -+ Z_FINISH. In this case all pending input is processed and all pending -+ output is flushed; avail_out must be large enough to hold all the -+ uncompressed data. (The size of the uncompressed data may have been saved -+ by the compressor for this purpose.) The next operation on this stream must -+ be inflateEnd to deallocate the decompression state. The use of Z_FINISH -+ is never required, but can be used to inform inflate that a faster routine -+ may be used for the single inflate() call. -+ -+ If a preset dictionary is needed at this point (see inflateSetDictionary -+ below), inflate sets strm-adler to the adler32 checksum of the -+ dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise -+ it sets strm->adler to the adler32 checksum of all output produced -+ so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or -+ an error code as described below. At the end of the stream, inflate() -+ checks that its computed adler32 checksum is equal to that saved by the -+ compressor and returns Z_STREAM_END only if the checksum is correct. -+ -+ inflate() returns Z_OK if some progress has been made (more input processed -+ or more output produced), Z_STREAM_END if the end of the compressed data has -+ been reached and all uncompressed output has been produced, Z_NEED_DICT if a -+ preset dictionary is needed at this point, Z_DATA_ERROR if the input data was -+ corrupted (input stream not conforming to the zlib format or incorrect -+ adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent -+ (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not -+ enough memory, Z_BUF_ERROR if no progress is possible or if there was not -+ enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR -+ case, the application may then call inflateSync to look for a good -+ compression block. -+*/ -+ -+ -+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); -+/* -+ All dynamically allocated data structures for this stream are freed. -+ This function discards any unprocessed input and does not flush any -+ pending output. -+ -+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state -+ was inconsistent. In the error case, msg may be set but then points to a -+ static string (which must not be deallocated). -+*/ -+ -+ /* Advanced functions */ -+ -+/* -+ The following functions are needed only in some special applications. -+*/ -+ -+/* -+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, -+ int level, -+ int method, -+ int windowBits, -+ int memLevel, -+ int strategy)); -+ -+ This is another version of deflateInit with more compression options. The -+ fields next_in, zalloc, zfree and opaque must be initialized before by -+ the caller. -+ -+ The method parameter is the compression method. It must be Z_DEFLATED in -+ this version of the library. -+ -+ The windowBits parameter is the base two logarithm of the window size -+ (the size of the history buffer). It should be in the range 8..15 for this -+ version of the library. Larger values of this parameter result in better -+ compression at the expense of memory usage. The default value is 15 if -+ deflateInit is used instead. -+ -+ The memLevel parameter specifies how much memory should be allocated -+ for the internal compression state. memLevel=1 uses minimum memory but -+ is slow and reduces compression ratio; memLevel=9 uses maximum memory -+ for optimal speed. The default value is 8. See zconf.h for total memory -+ usage as a function of windowBits and memLevel. -+ -+ The strategy parameter is used to tune the compression algorithm. Use the -+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a -+ filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no -+ string match). Filtered data consists mostly of small values with a -+ somewhat random distribution. In this case, the compression algorithm is -+ tuned to compress them better. The effect of Z_FILTERED is to force more -+ Huffman coding and less string matching; it is somewhat intermediate -+ between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects -+ the compression ratio but not the correctness of the compressed output even -+ if it is not set appropriately. -+ -+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough -+ memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid -+ method). msg is set to null if there is no error message. deflateInit2 does -+ not perform any compression: this will be done by deflate(). -+*/ -+ -+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, -+ const Bytef *dictionary, -+ uInt dictLength)); -+/* -+ Initializes the compression dictionary from the given byte sequence -+ without producing any compressed output. This function must be called -+ immediately after deflateInit, deflateInit2 or deflateReset, before any -+ call of deflate. The compressor and decompressor must use exactly the same -+ dictionary (see inflateSetDictionary). -+ -+ The dictionary should consist of strings (byte sequences) that are likely -+ to be encountered later in the data to be compressed, with the most commonly -+ used strings preferably put towards the end of the dictionary. Using a -+ dictionary is most useful when the data to be compressed is short and can be -+ predicted with good accuracy; the data can then be compressed better than -+ with the default empty dictionary. -+ -+ Depending on the size of the compression data structures selected by -+ deflateInit or deflateInit2, a part of the dictionary may in effect be -+ discarded, for example if the dictionary is larger than the window size in -+ deflate or deflate2. Thus the strings most likely to be useful should be -+ put at the end of the dictionary, not at the front. -+ -+ Upon return of this function, strm->adler is set to the Adler32 value -+ of the dictionary; the decompressor may later use this value to determine -+ which dictionary has been used by the compressor. (The Adler32 value -+ applies to the whole dictionary even if only a subset of the dictionary is -+ actually used by the compressor.) -+ -+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a -+ parameter is invalid (such as NULL dictionary) or the stream state is -+ inconsistent (for example if deflate has already been called for this stream -+ or if the compression method is bsort). deflateSetDictionary does not -+ perform any compression: this will be done by deflate(). -+*/ -+ -+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, -+ z_streamp source)); -+/* -+ Sets the destination stream as a complete copy of the source stream. -+ -+ This function can be useful when several compression strategies will be -+ tried, for example when there are several ways of pre-processing the input -+ data with a filter. The streams that will be discarded should then be freed -+ by calling deflateEnd. Note that deflateCopy duplicates the internal -+ compression state which can be quite large, so this strategy is slow and -+ can consume lots of memory. -+ -+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not -+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent -+ (such as zalloc being NULL). msg is left unchanged in both source and -+ destination. -+*/ -+ -+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); -+/* -+ This function is equivalent to deflateEnd followed by deflateInit, -+ but does not free and reallocate all the internal compression state. -+ The stream will keep the same compression level and any other attributes -+ that may have been set by deflateInit2. -+ -+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source -+ stream state was inconsistent (such as zalloc or state being NULL). -+*/ -+ -+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, -+ int level, -+ int strategy)); -+/* -+ Dynamically update the compression level and compression strategy. The -+ interpretation of level and strategy is as in deflateInit2. This can be -+ used to switch between compression and straight copy of the input data, or -+ to switch to a different kind of input data requiring a different -+ strategy. If the compression level is changed, the input available so far -+ is compressed with the old level (and may be flushed); the new level will -+ take effect only at the next call of deflate(). -+ -+ Before the call of deflateParams, the stream state must be set as for -+ a call of deflate(), since the currently available input may have to -+ be compressed and flushed. In particular, strm->avail_out must be non-zero. -+ -+ deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source -+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR -+ if strm->avail_out was zero. -+*/ -+ -+/* -+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, -+ int windowBits)); -+ -+ This is another version of inflateInit with an extra parameter. The -+ fields next_in, avail_in, zalloc, zfree and opaque must be initialized -+ before by the caller. -+ -+ The windowBits parameter is the base two logarithm of the maximum window -+ size (the size of the history buffer). It should be in the range 8..15 for -+ this version of the library. The default value is 15 if inflateInit is used -+ instead. If a compressed stream with a larger window size is given as -+ input, inflate() will return with the error code Z_DATA_ERROR instead of -+ trying to allocate a larger window. -+ -+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough -+ memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative -+ memLevel). msg is set to null if there is no error message. inflateInit2 -+ does not perform any decompression apart from reading the zlib header if -+ present: this will be done by inflate(). (So next_in and avail_in may be -+ modified, but next_out and avail_out are unchanged.) -+*/ -+ -+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, -+ const Bytef *dictionary, -+ uInt dictLength)); -+/* -+ Initializes the decompression dictionary from the given uncompressed byte -+ sequence. This function must be called immediately after a call of inflate -+ if this call returned Z_NEED_DICT. The dictionary chosen by the compressor -+ can be determined from the Adler32 value returned by this call of -+ inflate. The compressor and decompressor must use exactly the same -+ dictionary (see deflateSetDictionary). -+ -+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a -+ parameter is invalid (such as NULL dictionary) or the stream state is -+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the -+ expected one (incorrect Adler32 value). inflateSetDictionary does not -+ perform any decompression: this will be done by subsequent calls of -+ inflate(). -+*/ -+ -+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); -+/* -+ Skips invalid compressed data until a full flush point (see above the -+ description of deflate with Z_FULL_FLUSH) can be found, or until all -+ available input is skipped. No output is provided. -+ -+ inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR -+ if no more input was provided, Z_DATA_ERROR if no flush point has been found, -+ or Z_STREAM_ERROR if the stream structure was inconsistent. In the success -+ case, the application may save the current current value of total_in which -+ indicates where valid compressed data was found. In the error case, the -+ application may repeatedly call inflateSync, providing more input each time, -+ until success or end of the input data. -+*/ -+ -+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -+/* -+ This function is equivalent to inflateEnd followed by inflateInit, -+ but does not free and reallocate all the internal decompression state. -+ The stream will keep attributes that may have been set by inflateInit2. -+ -+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source -+ stream state was inconsistent (such as zalloc or state being NULL). -+*/ -+ -+ -+ /* utility functions */ -+ -+/* -+ The following utility functions are implemented on top of the -+ basic stream-oriented functions. To simplify the interface, some -+ default options are assumed (compression level and memory usage, -+ standard memory allocation functions). The source code of these -+ utility functions can easily be modified if you need special options. -+*/ -+ -+ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, -+ const Bytef *source, uLong sourceLen)); -+/* -+ Compresses the source buffer into the destination buffer. sourceLen is -+ the byte length of the source buffer. Upon entry, destLen is the total -+ size of the destination buffer, which must be at least 0.1% larger than -+ sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the -+ compressed buffer. -+ This function can be used to compress a whole file at once if the -+ input file is mmap'ed. -+ compress returns Z_OK if success, Z_MEM_ERROR if there was not -+ enough memory, Z_BUF_ERROR if there was not enough room in the output -+ buffer. -+*/ -+ -+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, -+ const Bytef *source, uLong sourceLen, -+ int level)); -+/* -+ Compresses the source buffer into the destination buffer. The level -+ parameter has the same meaning as in deflateInit. sourceLen is the byte -+ length of the source buffer. Upon entry, destLen is the total size of the -+ destination buffer, which must be at least 0.1% larger than sourceLen plus -+ 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. -+ -+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough -+ memory, Z_BUF_ERROR if there was not enough room in the output buffer, -+ Z_STREAM_ERROR if the level parameter is invalid. -+*/ -+ -+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, -+ const Bytef *source, uLong sourceLen)); -+/* -+ Decompresses the source buffer into the destination buffer. sourceLen is -+ the byte length of the source buffer. Upon entry, destLen is the total -+ size of the destination buffer, which must be large enough to hold the -+ entire uncompressed data. (The size of the uncompressed data must have -+ been saved previously by the compressor and transmitted to the decompressor -+ by some mechanism outside the scope of this compression library.) -+ Upon exit, destLen is the actual size of the compressed buffer. -+ This function can be used to decompress a whole file at once if the -+ input file is mmap'ed. -+ -+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not -+ enough memory, Z_BUF_ERROR if there was not enough room in the output -+ buffer, or Z_DATA_ERROR if the input data was corrupted. -+*/ -+ -+ -+typedef voidp gzFile; -+ -+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); -+/* -+ Opens a gzip (.gz) file for reading or writing. The mode parameter -+ is as in fopen ("rb" or "wb") but can also include a compression level -+ ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for -+ Huffman only compression as in "wb1h". (See the description -+ of deflateInit2 for more information about the strategy parameter.) -+ -+ gzopen can be used to read a file which is not in gzip format; in this -+ case gzread will directly read from the file without decompression. -+ -+ gzopen returns NULL if the file could not be opened or if there was -+ insufficient memory to allocate the (de)compression state; errno -+ can be checked to distinguish the two cases (if errno is zero, the -+ zlib error is Z_MEM_ERROR). */ -+ -+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -+/* -+ gzdopen() associates a gzFile with the file descriptor fd. File -+ descriptors are obtained from calls like open, dup, creat, pipe or -+ fileno (in the file has been previously opened with fopen). -+ The mode parameter is as in gzopen. -+ The next call of gzclose on the returned gzFile will also close the -+ file descriptor fd, just like fclose(fdopen(fd), mode) closes the file -+ descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). -+ gzdopen returns NULL if there was insufficient memory to allocate -+ the (de)compression state. -+*/ -+ -+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -+/* -+ Dynamically update the compression level or strategy. See the description -+ of deflateInit2 for the meaning of these parameters. -+ gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not -+ opened for writing. -+*/ -+ -+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -+/* -+ Reads the given number of uncompressed bytes from the compressed file. -+ If the input file was not in gzip format, gzread copies the given number -+ of bytes into the buffer. -+ gzread returns the number of uncompressed bytes actually read (0 for -+ end of file, -1 for error). */ -+ -+ZEXTERN int ZEXPORT gzwrite OF((gzFile file, -+ const voidp buf, unsigned len)); -+/* -+ Writes the given number of uncompressed bytes into the compressed file. -+ gzwrite returns the number of uncompressed bytes actually written -+ (0 in case of error). -+*/ -+ -+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); -+/* -+ Converts, formats, and writes the args to the compressed file under -+ control of the format string, as in fprintf. gzprintf returns the number of -+ uncompressed bytes actually written (0 in case of error). -+*/ -+ -+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -+/* -+ Writes the given null-terminated string to the compressed file, excluding -+ the terminating null character. -+ gzputs returns the number of characters written, or -1 in case of error. -+*/ -+ -+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -+/* -+ Reads bytes from the compressed file until len-1 characters are read, or -+ a newline character is read and transferred to buf, or an end-of-file -+ condition is encountered. The string is then terminated with a null -+ character. -+ gzgets returns buf, or Z_NULL in case of error. -+*/ -+ -+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -+/* -+ Writes c, converted to an unsigned char, into the compressed file. -+ gzputc returns the value that was written, or -1 in case of error. -+*/ -+ -+ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -+/* -+ Reads one byte from the compressed file. gzgetc returns this byte -+ or -1 in case of end of file or error. -+*/ -+ -+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -+/* -+ Flushes all pending output into the compressed file. The parameter -+ flush is as in the deflate() function. The return value is the zlib -+ error number (see function gzerror below). gzflush returns Z_OK if -+ the flush parameter is Z_FINISH and all output could be flushed. -+ gzflush should be called only when strictly necessary because it can -+ degrade compression. -+*/ -+ -+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, -+ z_off_t offset, int whence)); -+/* -+ Sets the starting position for the next gzread or gzwrite on the -+ given compressed file. The offset represents a number of bytes in the -+ uncompressed data stream. The whence parameter is defined as in lseek(2); -+ the value SEEK_END is not supported. -+ If the file is opened for reading, this function is emulated but can be -+ extremely slow. If the file is opened for writing, only forward seeks are -+ supported; gzseek then compresses a sequence of zeroes up to the new -+ starting position. -+ -+ gzseek returns the resulting offset location as measured in bytes from -+ the beginning of the uncompressed stream, or -1 in case of error, in -+ particular if the file is opened for writing and the new starting position -+ would be before the current position. -+*/ -+ -+ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -+/* -+ Rewinds the given file. This function is supported only for reading. -+ -+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -+*/ -+ -+ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); -+/* -+ Returns the starting position for the next gzread or gzwrite on the -+ given compressed file. This position represents a number of bytes in the -+ uncompressed data stream. -+ -+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -+*/ -+ -+ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -+/* -+ Returns 1 when EOF has previously been detected reading the given -+ input stream, otherwise zero. -+*/ -+ -+ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -+/* -+ Flushes all pending output if necessary, closes the compressed file -+ and deallocates all the (de)compression state. The return value is the zlib -+ error number (see function gzerror below). -+*/ -+ -+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -+/* -+ Returns the error message for the last error which occurred on the -+ given compressed file. errnum is set to zlib error number. If an -+ error occurred in the file system and not in the compression library, -+ errnum is set to Z_ERRNO and the application may consult errno -+ to get the exact error code. -+*/ -+ -+ /* checksum functions */ -+ -+/* -+ These functions are not related to compression but are exported -+ anyway because they might be useful in applications using the -+ compression library. -+*/ -+ -+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -+ -+/* -+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and -+ return the updated checksum. If buf is NULL, this function returns -+ the required initial value for the checksum. -+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed -+ much faster. Usage example: -+ -+ uLong adler = adler32(0L, Z_NULL, 0); -+ -+ while (read_buffer(buffer, length) != EOF) { -+ adler = adler32(adler, buffer, length); -+ } -+ if (adler != original_adler) error(); -+*/ -+ -+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -+/* -+ Update a running crc with the bytes buf[0..len-1] and return the updated -+ crc. If buf is NULL, this function returns the required initial value -+ for the crc. Pre- and post-conditioning (one's complement) is performed -+ within this function so it shouldn't be done by the application. -+ Usage example: -+ -+ uLong crc = crc32(0L, Z_NULL, 0); -+ -+ while (read_buffer(buffer, length) != EOF) { -+ crc = crc32(crc, buffer, length); -+ } -+ if (crc != original_crc) error(); -+*/ -+ -+ -+ /* various hacks, don't look :) */ -+ -+/* deflateInit and inflateInit are macros to allow checking the zlib version -+ * and the compiler's view of z_stream: -+ */ -+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, -+ const char *version, int stream_size)); -+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, -+ const char *version, int stream_size)); -+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, -+ int windowBits, int memLevel, -+ int strategy, const char *version, -+ int stream_size)); -+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, -+ const char *version, int stream_size)); -+#define deflateInit(strm, level) \ -+ deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) -+#define inflateInit(strm) \ -+ inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) -+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ -+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ -+ (strategy), ZLIB_VERSION, sizeof(z_stream)) -+#define inflateInit2(strm, windowBits) \ -+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) -+ -+ -+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL) -+ struct internal_state {int dummy;}; /* hack for buggy compilers */ -+#endif -+ -+ZEXTERN const char * ZEXPORT zError OF((int err)); -+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); -+ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _ZLIB_H */ ---- /dev/null 2004-02-02 20:32:13.000000000 +0000 -+++ linux/include/zlib/zutil.h 2004-07-05 23:59:30.000000000 +0100 -@@ -0,0 +1,225 @@ -+/* zutil.h -- internal interface and configuration of the compression library -+ * Copyright (C) 1995-2002 Jean-loup Gailly. -+ * For conditions of distribution and use, see copyright notice in zlib.h -+ */ -+ -+/* WARNING: this file should *not* be used by applications. It is -+ part of the implementation of the compression library and is -+ subject to change. Applications should only use zlib.h. -+ */ -+ -+/* @(#) $Id: zutil.h,v 1.1 2004/07/05 22:59:30 pb Exp $ */ -+ -+#ifndef _Z_UTIL_H -+#define _Z_UTIL_H -+ -+#include "zlib.h" -+ -+#include <linux/string.h> -+#define HAVE_MEMCPY -+ -+#if 0 // #ifdef STDC -+# include <stddef.h> -+# include <string.h> -+# include <stdlib.h> -+#endif -+#ifndef __KERNEL__ -+#ifdef NO_ERRNO_H -+ extern int errno; -+#else -+# include <errno.h> -+#endif -+#endif -+ -+#ifndef local -+# define local static -+#endif -+/* compile with -Dlocal if your debugger can't find static symbols */ -+ -+typedef unsigned char uch; -+typedef uch FAR uchf; -+typedef unsigned short ush; -+typedef ush FAR ushf; -+typedef unsigned long ulg; -+ -+extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ -+/* (size given to avoid silly warnings with Visual C++) */ -+ -+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] -+ -+#define ERR_RETURN(strm,err) \ -+ return (strm->msg = ERR_MSG(err), (err)) -+/* To be used only when the state is known to be valid */ -+ -+ /* common constants */ -+ -+#ifndef DEF_WBITS -+# define DEF_WBITS MAX_WBITS -+#endif -+/* default windowBits for decompression. MAX_WBITS is for compression only */ -+ -+#if MAX_MEM_LEVEL >= 8 -+# define DEF_MEM_LEVEL 8 -+#else -+# define DEF_MEM_LEVEL MAX_MEM_LEVEL -+#endif -+/* default memLevel */ -+ -+#define STORED_BLOCK 0 -+#define STATIC_TREES 1 -+#define DYN_TREES 2 -+/* The three kinds of block type */ -+ -+#define MIN_MATCH 3 -+#define MAX_MATCH 258 -+/* The minimum and maximum match lengths */ -+ -+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ -+ -+ /* target dependencies */ -+ -+#ifdef MSDOS -+# define OS_CODE 0x00 -+# if defined(__TURBOC__) || defined(__BORLANDC__) -+# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) -+ /* Allow compilation with ANSI keywords only enabled */ -+ void _Cdecl farfree( void *block ); -+ void *_Cdecl farmalloc( unsigned long nbytes ); -+# else -+# include <alloc.h> -+# endif -+# else /* MSC or DJGPP */ -+# include <malloc.h> -+# endif -+#endif -+ -+#ifdef OS2 -+# define OS_CODE 0x06 -+#endif -+ -+#ifdef WIN32 /* Window 95 & Windows NT */ -+# define OS_CODE 0x0b -+#endif -+ -+#if defined(VAXC) || defined(VMS) -+# define OS_CODE 0x02 -+# define F_OPEN(name, mode) \ -+ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") -+#endif -+ -+#ifdef AMIGA -+# define OS_CODE 0x01 -+#endif -+ -+#if defined(ATARI) || defined(atarist) -+# define OS_CODE 0x05 -+#endif -+ -+#if defined(MACOS) || defined(TARGET_OS_MAC) -+# define OS_CODE 0x07 -+# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os -+# include <unix.h> /* for fdopen */ -+# else -+# ifndef fdopen -+# define fdopen(fd,mode) NULL /* No fdopen() */ -+# endif -+# endif -+#endif -+ -+#ifdef __50SERIES /* Prime/PRIMOS */ -+# define OS_CODE 0x0F -+#endif -+ -+#ifdef TOPS20 -+# define OS_CODE 0x0a -+#endif -+ -+#if defined(_BEOS_) || defined(RISCOS) -+# define fdopen(fd,mode) NULL /* No fdopen() */ -+#endif -+ -+#if (defined(_MSC_VER) && (_MSC_VER > 600)) -+# define fdopen(fd,type) _fdopen(fd,type) -+#endif -+ -+ -+ /* Common defaults */ -+ -+#ifndef OS_CODE -+# define OS_CODE 0x03 /* assume Unix */ -+#endif -+ -+#ifndef F_OPEN -+# define F_OPEN(name, mode) fopen((name), (mode)) -+#endif -+ -+ /* functions */ -+ -+#ifdef HAVE_STRERROR -+ extern char *strerror OF((int)); -+# define zstrerror(errnum) strerror(errnum) -+#else -+# define zstrerror(errnum) "" -+#endif -+ -+#if defined(pyr) -+# define NO_MEMCPY -+#endif -+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) -+ /* Use our own functions for small and medium model with MSC <= 5.0. -+ * You may have to use the same strategy for Borland C (untested). -+ * The __SC__ check is for Symantec. -+ */ -+# define NO_MEMCPY -+#endif -+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) -+# define HAVE_MEMCPY -+#endif -+#ifdef HAVE_MEMCPY -+# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ -+# define zmemcpy _fmemcpy -+# define zmemcmp _fmemcmp -+# define zmemzero(dest, len) _fmemset(dest, 0, len) -+# else -+# define zmemcpy memcpy -+# define zmemcmp memcmp -+# define zmemzero(dest, len) memset(dest, 0, len) -+# endif -+#else -+ extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); -+ extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); -+ extern void zmemzero OF((Bytef* dest, uInt len)); -+#endif -+ -+/* Diagnostic functions */ -+#ifdef DEBUG -+# include <stdio.h> -+ extern int z_verbose; -+ extern void z_error OF((char *m)); -+# define Assert(cond,msg) {if(!(cond)) z_error(msg);} -+# define Trace(x) {if (z_verbose>=0) fprintf x ;} -+# define Tracev(x) {if (z_verbose>0) fprintf x ;} -+# define Tracevv(x) {if (z_verbose>1) fprintf x ;} -+# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} -+# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} -+#else -+# define Assert(cond,msg) -+# define Trace(x) -+# define Tracev(x) -+# define Tracevv(x) -+# define Tracec(c,x) -+# define Tracecv(c,x) -+#endif -+ -+ -+typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf, -+ uInt len)); -+voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); -+void zcfree OF((voidpf opaque, voidpf ptr)); -+ -+#define ZALLOC(strm, items, size) \ -+ (*((strm)->zalloc))((strm)->opaque, (items), (size)) -+#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) -+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} -+ -+#endif /* _Z_UTIL_H */ ---- /dev/null 2004-02-02 20:32:13.000000000 +0000 -+++ linux/include/zconf.h 2004-07-04 15:38:31.000000000 +0100 -@@ -0,0 +1,309 @@ -+/* zconf.h -- configuration of the zlib compression library -+ * Copyright (C) 1995-2002 Jean-loup Gailly. -+ * For conditions of distribution and use, see copyright notice in zlib.h -+ */ -+ -+/* @(#) $Id: zconf.h,v 1.2 2004/02/22 06:48:23 mcr Exp $ */ -+ -+#ifndef _ZCONF_H -+#define _ZCONF_H -+ -+/* -+ * If you *really* need a unique prefix for all types and library functions, -+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. -+ */ -+#ifdef IPCOMP_PREFIX -+# define deflateInit_ ipcomp_deflateInit_ -+# define deflate ipcomp_deflate -+# define deflateEnd ipcomp_deflateEnd -+# define inflateInit_ ipcomp_inflateInit_ -+# define inflate ipcomp_inflate -+# define inflateEnd ipcomp_inflateEnd -+# define deflateInit2_ ipcomp_deflateInit2_ -+# define deflateSetDictionary ipcomp_deflateSetDictionary -+# define deflateCopy ipcomp_deflateCopy -+# define deflateReset ipcomp_deflateReset -+# define deflateParams ipcomp_deflateParams -+# define inflateInit2_ ipcomp_inflateInit2_ -+# define inflateSetDictionary ipcomp_inflateSetDictionary -+# define inflateSync ipcomp_inflateSync -+# define inflateSyncPoint ipcomp_inflateSyncPoint -+# define inflateReset ipcomp_inflateReset -+# define compress ipcomp_compress -+# define compress2 ipcomp_compress2 -+# define uncompress ipcomp_uncompress -+# define adler32 ipcomp_adler32 -+# define crc32 ipcomp_crc32 -+# define get_crc_table ipcomp_get_crc_table -+/* SSS: these also need to be prefixed to avoid clash with ppp_deflate and ext2compression */ -+# define inflate_blocks ipcomp_deflate_blocks -+# define inflate_blocks_free ipcomp_deflate_blocks_free -+# define inflate_blocks_new ipcomp_inflate_blocks_new -+# define inflate_blocks_reset ipcomp_inflate_blocks_reset -+# define inflate_blocks_sync_point ipcomp_inflate_blocks_sync_point -+# define inflate_set_dictionary ipcomp_inflate_set_dictionary -+# define inflate_codes ipcomp_inflate_codes -+# define inflate_codes_free ipcomp_inflate_codes_free -+# define inflate_codes_new ipcomp_inflate_codes_new -+# define inflate_fast ipcomp_inflate_fast -+# define inflate_trees_bits ipcomp_inflate_trees_bits -+# define inflate_trees_dynamic ipcomp_inflate_trees_dynamic -+# define inflate_trees_fixed ipcomp_inflate_trees_fixed -+# define inflate_flush ipcomp_inflate_flush -+# define inflate_mask ipcomp_inflate_mask -+# define _dist_code _ipcomp_dist_code -+# define _length_code _ipcomp_length_code -+# define _tr_align _ipcomp_tr_align -+# define _tr_flush_block _ipcomp_tr_flush_block -+# define _tr_init _ipcomp_tr_init -+# define _tr_stored_block _ipcomp_tr_stored_block -+# define _tr_tally _ipcomp_tr_tally -+# define zError ipcomp_zError -+# define z_errmsg ipcomp_z_errmsg -+# define zlibVersion ipcomp_zlibVersion -+# define match_init ipcomp_match_init -+# define longest_match ipcomp_longest_match -+#endif -+ -+#ifdef Z_PREFIX -+# define Byte z_Byte -+# define uInt z_uInt -+# define uLong z_uLong -+# define Bytef z_Bytef -+# define charf z_charf -+# define intf z_intf -+# define uIntf z_uIntf -+# define uLongf z_uLongf -+# define voidpf z_voidpf -+# define voidp z_voidp -+#endif -+ -+#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) -+# define WIN32 -+#endif -+#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386) -+# ifndef __32BIT__ -+# define __32BIT__ -+# endif -+#endif -+#if defined(__MSDOS__) && !defined(MSDOS) -+# define MSDOS -+#endif -+ -+/* -+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more -+ * than 64k bytes at a time (needed on systems with 16-bit int). -+ */ -+#if defined(MSDOS) && !defined(__32BIT__) -+# define MAXSEG_64K -+#endif -+#ifdef MSDOS -+# define UNALIGNED_OK -+#endif -+ -+#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC) -+# define STDC -+#endif -+#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__) -+# ifndef STDC -+# define STDC -+# endif -+#endif -+ -+#ifndef STDC -+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -+# define const -+# endif -+#endif -+ -+/* Some Mac compilers merge all .h files incorrectly: */ -+#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__) -+# define NO_DUMMY_DECL -+#endif -+ -+/* Old Borland C incorrectly complains about missing returns: */ -+#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500) -+# define NEED_DUMMY_RETURN -+#endif -+ -+ -+/* Maximum value for memLevel in deflateInit2 */ -+#ifndef MAX_MEM_LEVEL -+# ifdef MAXSEG_64K -+# define MAX_MEM_LEVEL 8 -+# else -+# define MAX_MEM_LEVEL 9 -+# endif -+#endif -+ -+/* Maximum value for windowBits in deflateInit2 and inflateInit2. -+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files -+ * created by gzip. (Files created by minigzip can still be extracted by -+ * gzip.) -+ */ -+#ifndef MAX_WBITS -+# define MAX_WBITS 15 /* 32K LZ77 window */ -+#endif -+ -+/* The memory requirements for deflate are (in bytes): -+ (1 << (windowBits+2)) + (1 << (memLevel+9)) -+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) -+ plus a few kilobytes for small objects. For example, if you want to reduce -+ the default memory requirements from 256K to 128K, compile with -+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" -+ Of course this will generally degrade compression (there's no free lunch). -+ -+ The memory requirements for inflate are (in bytes) 1 << windowBits -+ that is, 32K for windowBits=15 (default value) plus a few kilobytes -+ for small objects. -+*/ -+ -+ /* Type declarations */ -+ -+#ifndef OF /* function prototypes */ -+# ifdef STDC -+# define OF(args) args -+# else -+# define OF(args) () -+# endif -+#endif -+ -+/* The following definitions for FAR are needed only for MSDOS mixed -+ * model programming (small or medium model with some far allocations). -+ * This was tested only with MSC; for other MSDOS compilers you may have -+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, -+ * just define FAR to be empty. -+ */ -+#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__) -+ /* MSC small or medium model */ -+# define SMALL_MEDIUM -+# ifdef _MSC_VER -+# define FAR _far -+# else -+# define FAR far -+# endif -+#endif -+#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__)) -+# ifndef __32BIT__ -+# define SMALL_MEDIUM -+# define FAR _far -+# endif -+#endif -+ -+/* Compile with -DZLIB_DLL for Windows DLL support */ -+#if defined(ZLIB_DLL) -+# if defined(_WINDOWS) || defined(WINDOWS) -+# ifdef FAR -+# undef FAR -+# endif -+# include <windows.h> -+# define ZEXPORT WINAPI -+# ifdef WIN32 -+# define ZEXPORTVA WINAPIV -+# else -+# define ZEXPORTVA FAR _cdecl _export -+# endif -+# endif -+# if defined (__BORLANDC__) -+# if (__BORLANDC__ >= 0x0500) && defined (WIN32) -+# include <windows.h> -+# define ZEXPORT __declspec(dllexport) WINAPI -+# define ZEXPORTRVA __declspec(dllexport) WINAPIV -+# else -+# if defined (_Windows) && defined (__DLL__) -+# define ZEXPORT _export -+# define ZEXPORTVA _export -+# endif -+# endif -+# endif -+#endif -+ -+#if defined (__BEOS__) -+# if defined (ZLIB_DLL) -+# define ZEXTERN extern __declspec(dllexport) -+# else -+# define ZEXTERN extern __declspec(dllimport) -+# endif -+#endif -+ -+#ifndef ZEXPORT -+# define ZEXPORT -+#endif -+#ifndef ZEXPORTVA -+# define ZEXPORTVA -+#endif -+#ifndef ZEXTERN -+# define ZEXTERN extern -+#endif -+ -+#ifndef FAR -+# define FAR -+#endif -+ -+#if !defined(MACOS) && !defined(TARGET_OS_MAC) -+typedef unsigned char Byte; /* 8 bits */ -+#endif -+typedef unsigned int uInt; /* 16 bits or more */ -+typedef unsigned long uLong; /* 32 bits or more */ -+ -+#ifdef SMALL_MEDIUM -+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -+# define Bytef Byte FAR -+#else -+ typedef Byte FAR Bytef; -+#endif -+typedef char FAR charf; -+typedef int FAR intf; -+typedef uInt FAR uIntf; -+typedef uLong FAR uLongf; -+ -+#ifdef STDC -+ typedef void FAR *voidpf; -+ typedef void *voidp; -+#else -+ typedef Byte FAR *voidpf; -+ typedef Byte *voidp; -+#endif -+ -+#ifdef HAVE_UNISTD_H -+# include <sys/types.h> /* for off_t */ -+# include <unistd.h> /* for SEEK_* and off_t */ -+# define z_off_t off_t -+#endif -+#ifndef SEEK_SET -+# define SEEK_SET 0 /* Seek from beginning of file. */ -+# define SEEK_CUR 1 /* Seek from current position. */ -+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -+#endif -+#ifndef z_off_t -+# define z_off_t long -+#endif -+ -+/* MVS linker does not support external names larger than 8 bytes */ -+#if defined(__MVS__) -+# pragma map(deflateInit_,"DEIN") -+# pragma map(deflateInit2_,"DEIN2") -+# pragma map(deflateEnd,"DEEND") -+# pragma map(inflateInit_,"ININ") -+# pragma map(inflateInit2_,"ININ2") -+# pragma map(inflateEnd,"INEND") -+# pragma map(inflateSync,"INSY") -+# pragma map(inflateSetDictionary,"INSEDI") -+# pragma map(inflate_blocks,"INBL") -+# pragma map(inflate_blocks_new,"INBLNE") -+# pragma map(inflate_blocks_free,"INBLFR") -+# pragma map(inflate_blocks_reset,"INBLRE") -+# pragma map(inflate_codes_free,"INCOFR") -+# pragma map(inflate_codes,"INCO") -+# pragma map(inflate_fast,"INFA") -+# pragma map(inflate_flush,"INFLU") -+# pragma map(inflate_mask,"INMA") -+# pragma map(inflate_set_dictionary,"INSEDI2") -+# pragma map(ipcomp_inflate_copyright,"INCOPY") -+# pragma map(inflate_trees_bits,"INTRBI") -+# pragma map(inflate_trees_dynamic,"INTRDY") -+# pragma map(inflate_trees_fixed,"INTRFI") -+# pragma map(inflate_trees_free,"INTRFR") -+#endif -+ -+#endif /* _ZCONF_H */ diff --git a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/mkdep.patch b/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/mkdep.patch deleted file mode 100644 index 4daeaa11be..0000000000 --- a/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/mkdep.patch +++ /dev/null @@ -1,16 +0,0 @@ - -# -# Made by http://www.mn-logistik.de/unsupported/pxa250/patcher -# - ---- linux/Makefile~mkdep 2003-12-19 09:36:51.000000000 -0800 -+++ linux/Makefile 2003-12-19 09:57:44.000000000 -0800 -@@ -458,7 +458,7 @@ - - dep-files: scripts/mkdep archdep include/linux/version.h - scripts/mkdep -- init/*.c > .depend -- scripts/mkdep -- `find $(FINDHPATH) -name SCCS -prune -o -follow -name \*.h ! -name modversions.h -print` > .hdepend -+ $(foreach, dir, $(FINDHPATH), scripts/mkdep -- `find $(dir) -name SCCS -prune -o -follow -name \*.h ! -name modversions.h -print` >> .hdepend) - $(MAKE) $(patsubst %,_sfdep_%,$(SUBDIRS)) _FASTDEP_ALL_SUB_DIRS="$(SUBDIRS)" - ifdef CONFIG_MODVERSIONS - $(MAKE) update-modverfile |