diff options
Diffstat (limited to 'packages/libxine/libxine-1.0.0-beta12/full.patch')
| -rw-r--r-- | packages/libxine/libxine-1.0.0-beta12/full.patch | 5601 |
1 files changed, 0 insertions, 5601 deletions
diff --git a/packages/libxine/libxine-1.0.0-beta12/full.patch b/packages/libxine/libxine-1.0.0-beta12/full.patch deleted file mode 100644 index d36dc39417..0000000000 --- a/packages/libxine/libxine-1.0.0-beta12/full.patch +++ /dev/null @@ -1,5601 +0,0 @@ -Copyright (C) 2003, Fred Boulay <dilb@handhelds.org> -Licensed under GPL v2 - -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/autogen.sh xine-lib-1-beta12/autogen.sh -*** xine-lib-1-beta12_orig/autogen.sh Sun Mar 2 06:47:39 2003 ---- xine-lib-1-beta12/autogen.sh Sun May 18 13:32:51 2003 -*************** -*** 140,145 **** ---- 140,149 ---- - echo $_echo_n " + Running libtoolize: $_echo_c"; - libtoolize --force --copy >/dev/null 2>&1; - echo "done." -+ echo $_echo_n " + copying patched ltmain.sh solving DESTDIR issues: $_echo_c"; -+ cp -f ltmain_patched.sh ltmain.sh; -+ echo "done." -+ - } - - #-------------------- -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/configure.ac xine-lib-1-beta12/configure.ac -*** xine-lib-1-beta12_orig/configure.ac Sun May 11 13:11:06 2003 ---- xine-lib-1-beta12/configure.ac Sun May 18 15:59:50 2003 -*************** -*** 670,676 **** - dnl --------------------------------------------- - dnl freetype2 lib. - dnl --------------------------------------------- -! AC_PATH_PROG(FREETYPE_CONFIG, freetype-config, no) - if test "$FREETYPE_CONFIG" = "no" ; then - AC_MSG_RESULT([*** freetype-config not found, freetype2 support disabled ***]) - else ---- 670,676 ---- - dnl --------------------------------------------- - dnl freetype2 lib. - dnl --------------------------------------------- -! AC_PATH_PROG(FREETYPE_CONFIG, moooooooooooo_putain_de_script_freetype-config, no) - if test "$FREETYPE_CONFIG" = "no" ; then - AC_MSG_RESULT([*** freetype-config not found, freetype2 support disabled ***]) - else -*************** -*** 737,743 **** - dnl --------------------------------------------- - dnl gnome-vfs support - dnl --------------------------------------------- -! PKG_CHECK_MODULES(GNOME_VFS, gnome-vfs-2.0, - no_gnome_vfs=no, - no_gnome_vfs=yes) - AC_SUBST(GNOME_VFS_CFLAGS) ---- 737,743 ---- - dnl --------------------------------------------- - dnl gnome-vfs support - dnl --------------------------------------------- -! PKG_CHECK_MODULES(GNOME_VFS, putain_de_module_gnome-vfs-2.0, - no_gnome_vfs=no, - no_gnome_vfs=yes) - AC_SUBST(GNOME_VFS_CFLAGS) -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/ltmain_patched.sh xine-lib-1-beta12/ltmain_patched.sh -*** xine-lib-1-beta12_orig/ltmain_patched.sh Wed Dec 31 19:00:00 1969 ---- xine-lib-1-beta12/ltmain_patched.sh Sun May 18 13:31:34 2003 -*************** -*** 0 **** ---- 1,5044 ---- -+ # ltmain.sh - Provide generalized library-building support services. -+ # NOTE: Changing this file will not affect anything until you rerun configure. -+ # -+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -+ # Free Software Foundation, Inc. -+ # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -+ # -+ # This program is free software; you can redistribute it and/or modify -+ # it under the terms of the GNU General Public License as published by -+ # the Free Software Foundation; either version 2 of the License, or -+ # (at your option) any later version. -+ # -+ # This program is distributed in the hope that it will be useful, but -+ # WITHOUT ANY WARRANTY; without even the implied warranty of -+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ # General Public License for more details. -+ # -+ # You should have received a copy of the GNU General Public License -+ # along with this program; if not, write to the Free Software -+ # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ # -+ # As a special exception to the GNU General Public License, if you -+ # distribute this file as part of a program that contains a -+ # configuration script generated by Autoconf, you may include it under -+ # the same distribution terms that you use for the rest of that program. -+ -+ # Check that we have a working $echo. -+ if test "X$1" = X--no-reexec; then -+ # Discard the --no-reexec flag, and continue. -+ shift -+ elif test "X$1" = X--fallback-echo; then -+ # Avoid inline document here, it may be left over -+ : -+ elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then -+ # Yippee, $echo works! -+ : -+ else -+ # Restart under the correct shell, and then maybe $echo will work. -+ exec $SHELL "$0" --no-reexec ${1+"$@"} -+ fi -+ -+ if test "X$1" = X--fallback-echo; then -+ # used as fallback echo -+ shift -+ cat <<EOF -+ $* -+ EOF -+ exit 0 -+ fi -+ -+ # The name of this program. -+ progname=`$echo "$0" | sed 's%^.*/%%'` -+ modename="$progname" -+ -+ # Constants. -+ PROGRAM=ltmain.sh -+ PACKAGE=libtool -+ VERSION=1.4.2a -+ TIMESTAMP=" (1.922.2.79 2001/11/28 21:50:31)" -+ -+ default_mode= -+ help="Try \`$progname --help' for more information." -+ magic="%%%MAGIC variable%%%" -+ mkdir="mkdir" -+ mv="mv -f" -+ rm="rm -f" -+ -+ # Sed substitution that helps us do robust quoting. It backslashifies -+ # metacharacters that are still active within double-quoted strings. -+ Xsed='sed -e 1s/^X//' -+ sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' -+ SP2NL='tr \040 \012' -+ NL2SP='tr \015\012 \040\040' -+ -+ # NLS nuisances. -+ # Only set LANG and LC_ALL to C if already set. -+ # These must not be set unconditionally because not all systems understand -+ # e.g. LANG=C (notably SCO). -+ # We save the old values to restore during execute mode. -+ if test "${LC_ALL+set}" = set; then -+ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL -+ fi -+ if test "${LANG+set}" = set; then -+ save_LANG="$LANG"; LANG=C; export LANG -+ fi -+ -+ # Make sure IFS has a sensible default -+ : ${IFS=" "} -+ -+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then -+ echo "$modename: not configured to build any kind of library" 1>&2 -+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 -+ exit 1 -+ fi -+ -+ # Global variables. -+ mode=$default_mode -+ nonopt= -+ prev= -+ prevopt= -+ run= -+ show="$echo" -+ show_help= -+ execute_dlfiles= -+ lo2o="s/\\.lo\$/.${objext}/" -+ o2lo="s/\\.${objext}\$/.lo/" -+ -+ # Parse our command line options once, thoroughly. -+ while test $# -gt 0 -+ do -+ arg="$1" -+ shift -+ -+ case $arg in -+ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; -+ *) optarg= ;; -+ esac -+ -+ # If the previous option needs an argument, assign it. -+ if test -n "$prev"; then -+ case $prev in -+ execute_dlfiles) -+ execute_dlfiles="$execute_dlfiles $arg" -+ ;; -+ *) -+ eval "$prev=\$arg" -+ ;; -+ esac -+ -+ prev= -+ prevopt= -+ continue -+ fi -+ -+ # Have we seen a non-optional argument yet? -+ case $arg in -+ --help) -+ show_help=yes -+ ;; -+ -+ --version) -+ echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" -+ exit 0 -+ ;; -+ -+ --config) -+ sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 -+ exit 0 -+ ;; -+ -+ --debug) -+ echo "$progname: enabling shell trace mode" -+ set -x -+ ;; -+ -+ --dry-run | -n) -+ run=: -+ ;; -+ -+ --features) -+ echo "host: $host" -+ if test "$build_libtool_libs" = yes; then -+ echo "enable shared libraries" -+ else -+ echo "disable shared libraries" -+ fi -+ if test "$build_old_libs" = yes; then -+ echo "enable static libraries" -+ else -+ echo "disable static libraries" -+ fi -+ exit 0 -+ ;; -+ -+ --finish) mode="finish" ;; -+ -+ --mode) prevopt="--mode" prev=mode ;; -+ --mode=*) mode="$optarg" ;; -+ -+ --preserve-dup-deps) duplicate_deps="yes" ;; -+ -+ --quiet | --silent) -+ show=: -+ ;; -+ -+ -dlopen) -+ prevopt="-dlopen" -+ prev=execute_dlfiles -+ ;; -+ -+ -*) -+ $echo "$modename: unrecognized option \`$arg'" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ ;; -+ -+ *) -+ nonopt="$arg" -+ break -+ ;; -+ esac -+ done -+ -+ if test -n "$prevopt"; then -+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ # If this variable is set in any of the actions, the command in it -+ # will be execed at the end. This prevents here-documents from being -+ # left over by shells. -+ exec_cmd= -+ -+ if test -z "$show_help"; then -+ -+ # Infer the operation mode. -+ if test -z "$mode"; then -+ case $nonopt in -+ *cc | *++ | gcc* | *-gcc*) -+ mode=link -+ for arg -+ do -+ case $arg in -+ -c) -+ mode=compile -+ break -+ ;; -+ esac -+ done -+ ;; -+ *db | *dbx | *strace | *truss) -+ mode=execute -+ ;; -+ *install*|cp|mv) -+ mode=install -+ ;; -+ *rm) -+ mode=uninstall -+ ;; -+ *) -+ # If we have no mode, but dlfiles were specified, then do execute mode. -+ test -n "$execute_dlfiles" && mode=execute -+ -+ # Just use the default operation mode. -+ if test -z "$mode"; then -+ if test -n "$nonopt"; then -+ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 -+ else -+ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 -+ fi -+ fi -+ ;; -+ esac -+ fi -+ -+ # Only execute mode is allowed to have -dlopen flags. -+ if test -n "$execute_dlfiles" && test "$mode" != execute; then -+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ # Change the help message to a mode-specific one. -+ generic_help="$help" -+ help="Try \`$modename --help --mode=$mode' for more information." -+ -+ # These modes are in order of execution frequency so that they run quickly. -+ case $mode in -+ # libtool compile mode -+ compile) -+ modename="$modename: compile" -+ # Get the compilation command and the source file. -+ base_compile= -+ prev= -+ lastarg= -+ srcfile="$nonopt" -+ suppress_output= -+ -+ user_target=no -+ for arg -+ do -+ case $prev in -+ "") ;; -+ xcompiler) -+ # Aesthetically quote the previous argument. -+ prev= -+ lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -+ -+ case $arg in -+ # Double-quote args containing other shell metacharacters. -+ # Many Bourne shells cannot handle close brackets correctly -+ # in scan sets, so we specify it separately. -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ arg="\"$arg\"" -+ ;; -+ esac -+ -+ # Add the previous argument to base_compile. -+ if test -z "$base_compile"; then -+ base_compile="$lastarg" -+ else -+ base_compile="$base_compile $lastarg" -+ fi -+ continue -+ ;; -+ esac -+ -+ # Accept any command-line options. -+ case $arg in -+ -o) -+ if test "$user_target" != "no"; then -+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2 -+ exit 1 -+ fi -+ user_target=next -+ ;; -+ -+ -static) -+ build_old_libs=yes -+ continue -+ ;; -+ -+ -prefer-pic) -+ pic_mode=yes -+ continue -+ ;; -+ -+ -prefer-non-pic) -+ pic_mode=no -+ continue -+ ;; -+ -+ -Xcompiler) -+ prev=xcompiler -+ continue -+ ;; -+ -+ -Wc,*) -+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` -+ lastarg= -+ save_ifs="$IFS"; IFS=',' -+ for arg in $args; do -+ IFS="$save_ifs" -+ -+ # Double-quote args containing other shell metacharacters. -+ # Many Bourne shells cannot handle close brackets correctly -+ # in scan sets, so we specify it separately. -+ case $arg in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ arg="\"$arg\"" -+ ;; -+ esac -+ lastarg="$lastarg $arg" -+ done -+ IFS="$save_ifs" -+ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` -+ -+ # Add the arguments to base_compile. -+ if test -z "$base_compile"; then -+ base_compile="$lastarg" -+ else -+ base_compile="$base_compile $lastarg" -+ fi -+ continue -+ ;; -+ esac -+ -+ case $user_target in -+ next) -+ # The next one is the -o target name -+ user_target=yes -+ continue -+ ;; -+ yes) -+ # We got the output file -+ user_target=set -+ libobj="$arg" -+ continue -+ ;; -+ esac -+ -+ # Accept the current argument as the source file. -+ lastarg="$srcfile" -+ srcfile="$arg" -+ -+ # Aesthetically quote the previous argument. -+ -+ # Backslashify any backslashes, double quotes, and dollar signs. -+ # These are the only characters that are still specially -+ # interpreted inside of double-quoted scrings. -+ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` -+ -+ # Double-quote args containing other shell metacharacters. -+ # Many Bourne shells cannot handle close brackets correctly -+ # in scan sets, so we specify it separately. -+ case $lastarg in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ lastarg="\"$lastarg\"" -+ ;; -+ esac -+ -+ # Add the previous argument to base_compile. -+ if test -z "$base_compile"; then -+ base_compile="$lastarg" -+ else -+ base_compile="$base_compile $lastarg" -+ fi -+ done -+ -+ case $user_target in -+ set) -+ ;; -+ no) -+ # Get the name of the library object. -+ libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` -+ ;; -+ *) -+ $echo "$modename: you must specify a target with \`-o'" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ # Recognize several different file suffixes. -+ # If the user specifies -o file.o, it is replaced with file.lo -+ xform='[cCFSfmso]' -+ case $libobj in -+ *.ada) xform=ada ;; -+ *.adb) xform=adb ;; -+ *.ads) xform=ads ;; -+ *.asm) xform=asm ;; -+ *.c++) xform=c++ ;; -+ *.cc) xform=cc ;; -+ *.cpp) xform=cpp ;; -+ *.cxx) xform=cxx ;; -+ *.f90) xform=f90 ;; -+ *.for) xform=for ;; -+ esac -+ -+ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` -+ -+ case $libobj in -+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; -+ *) -+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ if test -z "$base_compile"; then -+ $echo "$modename: you must specify a compilation command" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ # Delete any leftover library objects. -+ if test "$build_old_libs" = yes; then -+ removelist="$obj $libobj" -+ else -+ removelist="$libobj" -+ fi -+ -+ $run $rm $removelist -+ trap "$run $rm $removelist; exit 1" 1 2 15 -+ -+ # On Cygwin there's no "real" PIC flag so we must build both object types -+ case $host_os in -+ cygwin* | mingw* | pw32* | os2*) -+ pic_mode=default -+ ;; -+ esac -+ if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then -+ # non-PIC code in shared libraries is not supported -+ pic_mode=default -+ fi -+ -+ # Calculate the filename of the output object if compiler does -+ # not support -o with -c -+ if test "$compiler_c_o" = no; then -+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} -+ lockfile="$output_obj.lock" -+ removelist="$removelist $output_obj $lockfile" -+ trap "$run $rm $removelist; exit 1" 1 2 15 -+ else -+ need_locks=no -+ lockfile= -+ fi -+ -+ # Lock this critical section if it is needed -+ # We use this script file to make the link, it avoids creating a new file -+ if test "$need_locks" = yes; then -+ until $run ln "$0" "$lockfile" 2>/dev/null; do -+ $show "Waiting for $lockfile to be removed" -+ sleep 2 -+ done -+ elif test "$need_locks" = warn; then -+ if test -f "$lockfile"; then -+ echo "\ -+ *** ERROR, $lockfile exists and contains: -+ `cat $lockfile 2>/dev/null` -+ -+ This indicates that another process is trying to use the same -+ temporary object file, and libtool could not work around it because -+ your compiler does not support \`-c' and \`-o' together. If you -+ repeat this compilation, it may succeed, by chance, but you had better -+ avoid parallel builds (make -j) in this platform, or get a better -+ compiler." -+ -+ $run $rm $removelist -+ exit 1 -+ fi -+ echo $srcfile > "$lockfile" -+ fi -+ -+ if test -n "$fix_srcfile_path"; then -+ eval srcfile=\"$fix_srcfile_path\" -+ fi -+ -+ # Only build a PIC object if we are building libtool libraries. -+ if test "$build_libtool_libs" = yes; then -+ # Without this assignment, base_compile gets emptied. -+ fbsd_hideous_sh_bug=$base_compile -+ -+ if test "$pic_mode" != no; then -+ # All platforms use -DPIC, to notify preprocessed assembler code. -+ command="$base_compile $srcfile $pic_flag -DPIC" -+ else -+ # Don't build PIC code -+ command="$base_compile $srcfile" -+ fi -+ if test "$build_old_libs" = yes; then -+ lo_libobj="$libobj" -+ dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` -+ if test "X$dir" = "X$libobj"; then -+ dir="$objdir" -+ else -+ dir="$dir/$objdir" -+ fi -+ libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` -+ -+ if test -d "$dir"; then -+ $show "$rm $libobj" -+ $run $rm $libobj -+ else -+ $show "$mkdir $dir" -+ $run $mkdir $dir -+ status=$? -+ if test $status -ne 0 && test ! -d $dir; then -+ exit $status -+ fi -+ fi -+ fi -+ if test "$compiler_o_lo" = yes; then -+ output_obj="$libobj" -+ command="$command -o $output_obj" -+ elif test "$compiler_c_o" = yes; then -+ output_obj="$obj" -+ command="$command -o $output_obj" -+ fi -+ -+ $run $rm "$output_obj" -+ $show "$command" -+ if $run eval "$command"; then : -+ else -+ test -n "$output_obj" && $run $rm $removelist -+ exit 1 -+ fi -+ -+ if test "$need_locks" = warn && -+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then -+ echo "\ -+ *** ERROR, $lockfile contains: -+ `cat $lockfile 2>/dev/null` -+ -+ but it should contain: -+ $srcfile -+ -+ This indicates that another process is trying to use the same -+ temporary object file, and libtool could not work around it because -+ your compiler does not support \`-c' and \`-o' together. If you -+ repeat this compilation, it may succeed, by chance, but you had better -+ avoid parallel builds (make -j) in this platform, or get a better -+ compiler." -+ -+ $run $rm $removelist -+ exit 1 -+ fi -+ -+ # Just move the object if needed, then go on to compile the next one -+ if test x"$output_obj" != x"$libobj"; then -+ $show "$mv $output_obj $libobj" -+ if $run $mv $output_obj $libobj; then : -+ else -+ error=$? -+ $run $rm $removelist -+ exit $error -+ fi -+ fi -+ -+ # If we have no pic_flag, then copy the object into place and finish. -+ if (test -z "$pic_flag" || test "$pic_mode" != default) && -+ test "$build_old_libs" = yes; then -+ # Rename the .lo from within objdir to obj -+ if test -f $obj; then -+ $show $rm $obj -+ $run $rm $obj -+ fi -+ -+ $show "$mv $libobj $obj" -+ if $run $mv $libobj $obj; then : -+ else -+ error=$? -+ $run $rm $removelist -+ exit $error -+ fi -+ -+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` -+ if test "X$xdir" = "X$obj"; then -+ xdir="." -+ else -+ xdir="$xdir" -+ fi -+ baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` -+ libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` -+ # Now arrange that obj and lo_libobj become the same file -+ $show "(cd $xdir && $LN_S $baseobj $libobj)" -+ if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then -+ # Unlock the critical section if it was locked -+ if test "$need_locks" != no; then -+ $run $rm "$lockfile" -+ fi -+ exit 0 -+ else -+ error=$? -+ $run $rm $removelist -+ exit $error -+ fi -+ fi -+ -+ # Allow error messages only from the first compilation. -+ suppress_output=' >/dev/null 2>&1' -+ fi -+ -+ # Only build a position-dependent object if we build old libraries. -+ if test "$build_old_libs" = yes; then -+ if test "$pic_mode" != yes; then -+ # Don't build PIC code -+ command="$base_compile $srcfile" -+ else -+ # All platforms use -DPIC, to notify preprocessed assembler code. -+ command="$base_compile $srcfile $pic_flag -DPIC" -+ fi -+ if test "$compiler_c_o" = yes; then -+ command="$command -o $obj" -+ output_obj="$obj" -+ fi -+ -+ # Suppress compiler output if we already did a PIC compilation. -+ command="$command$suppress_output" -+ $run $rm "$output_obj" -+ $show "$command" -+ if $run eval "$command"; then : -+ else -+ $run $rm $removelist -+ exit 1 -+ fi -+ -+ if test "$need_locks" = warn && -+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then -+ echo "\ -+ *** ERROR, $lockfile contains: -+ `cat $lockfile 2>/dev/null` -+ -+ but it should contain: -+ $srcfile -+ -+ This indicates that another process is trying to use the same -+ temporary object file, and libtool could not work around it because -+ your compiler does not support \`-c' and \`-o' together. If you -+ repeat this compilation, it may succeed, by chance, but you had better -+ avoid parallel builds (make -j) in this platform, or get a better -+ compiler." -+ -+ $run $rm $removelist -+ exit 1 -+ fi -+ -+ # Just move the object if needed -+ if test x"$output_obj" != x"$obj"; then -+ $show "$mv $output_obj $obj" -+ if $run $mv $output_obj $obj; then : -+ else -+ error=$? -+ $run $rm $removelist -+ exit $error -+ fi -+ fi -+ -+ # Create an invalid libtool object if no PIC, so that we do not -+ # accidentally link it into a program. -+ if test "$build_libtool_libs" != yes; then -+ $show "echo timestamp > $libobj" -+ $run eval "echo timestamp > \$libobj" || exit $? -+ else -+ # Move the .lo from within objdir -+ $show "$mv $libobj $lo_libobj" -+ if $run $mv $libobj $lo_libobj; then : -+ else -+ error=$? -+ $run $rm $removelist -+ exit $error -+ fi -+ fi -+ fi -+ -+ # Unlock the critical section if it was locked -+ if test "$need_locks" != no; then -+ $run $rm "$lockfile" -+ fi -+ -+ exit 0 -+ ;; -+ -+ # libtool link mode -+ link | relink) -+ modename="$modename: link" -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -+ # It is impossible to link a dll without this setting, and -+ # we shouldn't force the makefile maintainer to figure out -+ # which system we are compiling for in order to pass an extra -+ # flag for every libtool invokation. -+ # allow_undefined=no -+ -+ # FIXME: Unfortunately, there are problems with the above when trying -+ # to make a dll which has undefined symbols, in which case not -+ # even a static library is built. For now, we need to specify -+ # -no-undefined on the libtool link line when we can be certain -+ # that all symbols are satisfied, otherwise we get a static library. -+ allow_undefined=yes -+ ;; -+ *) -+ allow_undefined=yes -+ ;; -+ esac -+ libtool_args="$nonopt" -+ compile_command="$nonopt" -+ finalize_command="$nonopt" -+ -+ compile_rpath= -+ finalize_rpath= -+ compile_shlibpath= -+ finalize_shlibpath= -+ convenience= -+ old_convenience= -+ deplibs= -+ old_deplibs= -+ compiler_flags= -+ linker_flags= -+ dllsearchpath= -+ lib_search_path=`pwd` -+ -+ avoid_version=no -+ dlfiles= -+ dlprefiles= -+ dlself=no -+ export_dynamic=no -+ export_symbols= -+ export_symbols_regex= -+ generated= -+ libobjs= -+ ltlibs= -+ module=no -+ no_install=no -+ objs= -+ prefer_static_libs=no -+ preload=no -+ prev= -+ prevarg= -+ release= -+ rpath= -+ xrpath= -+ perm_rpath= -+ temp_rpath= -+ thread_safe=no -+ vinfo= -+ -+ # We need to know -static, to get the right output filenames. -+ for arg -+ do -+ case $arg in -+ -all-static | -static) -+ if test "X$arg" = "X-all-static"; then -+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then -+ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 -+ fi -+ if test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ else -+ if test -z "$pic_flag" && test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ fi -+ build_libtool_libs=no -+ build_old_libs=yes -+ prefer_static_libs=yes -+ break -+ ;; -+ esac -+ done -+ -+ # See if our shared archives depend on static archives. -+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes -+ -+ # Go through the arguments, transforming them on the way. -+ while test $# -gt 0; do -+ arg="$1" -+ shift -+ case $arg in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test -+ ;; -+ *) qarg=$arg ;; -+ esac -+ libtool_args="$libtool_args $qarg" -+ -+ # If the previous option needs an argument, assign it. -+ if test -n "$prev"; then -+ case $prev in -+ output) -+ compile_command="$compile_command @OUTPUT@" -+ finalize_command="$finalize_command @OUTPUT@" -+ ;; -+ esac -+ -+ case $prev in -+ dlfiles|dlprefiles) -+ if test "$preload" = no; then -+ # Add the symbol object into the linking commands. -+ compile_command="$compile_command @SYMFILE@" -+ finalize_command="$finalize_command @SYMFILE@" -+ preload=yes -+ fi -+ case $arg in -+ *.la | *.lo) ;; # We handle these cases below. -+ force) -+ if test "$dlself" = no; then -+ dlself=needless -+ export_dynamic=yes -+ fi -+ prev= -+ continue -+ ;; -+ self) -+ if test "$prev" = dlprefiles; then -+ dlself=yes -+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then -+ dlself=yes -+ else -+ dlself=needless -+ export_dynamic=yes -+ fi -+ prev= -+ continue -+ ;; -+ *) -+ if test "$prev" = dlfiles; then -+ dlfiles="$dlfiles $arg" -+ else -+ dlprefiles="$dlprefiles $arg" -+ fi -+ prev= -+ continue -+ ;; -+ esac -+ ;; -+ expsyms) -+ export_symbols="$arg" -+ if test ! -f "$arg"; then -+ $echo "$modename: symbol file \`$arg' does not exist" -+ exit 1 -+ fi -+ prev= -+ continue -+ ;; -+ expsyms_regex) -+ export_symbols_regex="$arg" -+ prev= -+ continue -+ ;; -+ release) -+ release="-$arg" -+ prev= -+ continue -+ ;; -+ rpath | xrpath) -+ # We need an absolute path. -+ case $arg in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ $echo "$modename: only absolute run-paths are allowed" 1>&2 -+ exit 1 -+ ;; -+ esac -+ if test "$prev" = rpath; then -+ case "$rpath " in -+ *" $arg "*) ;; -+ *) rpath="$rpath $arg" ;; -+ esac -+ else -+ case "$xrpath " in -+ *" $arg "*) ;; -+ *) xrpath="$xrpath $arg" ;; -+ esac -+ fi -+ prev= -+ continue -+ ;; -+ xcompiler) -+ compiler_flags="$compiler_flags $qarg" -+ prev= -+ compile_command="$compile_command $qarg" -+ finalize_command="$finalize_command $qarg" -+ continue -+ ;; -+ xlinker) -+ linker_flags="$linker_flags $qarg" -+ compiler_flags="$compiler_flags $wl$qarg" -+ prev= -+ compile_command="$compile_command $wl$qarg" -+ finalize_command="$finalize_command $wl$qarg" -+ continue -+ ;; -+ *) -+ eval "$prev=\"\$arg\"" -+ prev= -+ continue -+ ;; -+ esac -+ fi # test -n $prev -+ -+ prevarg="$arg" -+ -+ case $arg in -+ -all-static) -+ if test -n "$link_static_flag"; then -+ compile_command="$compile_command $link_static_flag" -+ finalize_command="$finalize_command $link_static_flag" -+ fi -+ continue -+ ;; -+ -+ -allow-undefined) -+ # FIXME: remove this flag sometime in the future. -+ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 -+ continue -+ ;; -+ -+ -avoid-version) -+ avoid_version=yes -+ continue -+ ;; -+ -+ -dlopen) -+ prev=dlfiles -+ continue -+ ;; -+ -+ -dlpreopen) -+ prev=dlprefiles -+ continue -+ ;; -+ -+ -export-dynamic) -+ export_dynamic=yes -+ continue -+ ;; -+ -+ -export-symbols | -export-symbols-regex) -+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -+ $echo "$modename: more than one -exported-symbols argument is not allowed" -+ exit 1 -+ fi -+ if test "X$arg" = "X-export-symbols"; then -+ prev=expsyms -+ else -+ prev=expsyms_regex -+ fi -+ continue -+ ;; -+ -+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* -+ # so, if we see these flags be careful not to treat them like -L -+ -L[A-Z][A-Z]*:*) -+ case $with_gcc/$host in -+ no/*-*-irix* | no/*-*-nonstopux*) -+ compile_command="$compile_command $arg" -+ finalize_command="$finalize_command $arg" -+ ;; -+ esac -+ continue -+ ;; -+ -+ -L*) -+ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ absdir=`cd "$dir" && pwd` -+ if test -z "$absdir"; then -+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 -+ exit 1 -+ fi -+ dir="$absdir" -+ ;; -+ esac -+ case "$deplibs " in -+ *" -L$dir "*) ;; -+ *) -+ deplibs="$deplibs -L$dir" -+ lib_search_path="$lib_search_path $dir" -+ ;; -+ esac -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -+ case :$dllsearchpath: in -+ *":$dir:"*) ;; -+ *) dllsearchpath="$dllsearchpath:$dir";; -+ esac -+ ;; -+ esac -+ continue -+ ;; -+ -+ -l*) -+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then -+ case $host in -+ *-*-cygwin* | *-*-pw32* | *-*-beos*) -+ # These systems don't actually have a C or math library (as such) -+ continue -+ ;; -+ *-*-mingw* | *-*-os2*) -+ # These systems don't actually have a C library (as such) -+ test "X$arg" = "X-lc" && continue -+ ;; -+ *-*-openbsd* | *-*-freebsd*) -+ # Do not include libc due to us having libc/libc_r. -+ test "X$arg" = "X-lc" && continue -+ ;; -+ esac -+ elif test "X$arg" = "X-lc_r"; then -+ case $host in -+ *-*-openbsd* | *-*-freebsd*) -+ # Do not include libc_r directly, use -pthread flag. -+ continue -+ ;; -+ esac -+ fi -+ deplibs="$deplibs $arg" -+ continue -+ ;; -+ -+ -module) -+ module=yes -+ continue -+ ;; -+ -+ -no-fast-install) -+ fast_install=no -+ continue -+ ;; -+ -+ -no-install) -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -+ # The PATH hackery in wrapper scripts is required on Windows -+ # in order for the loader to find any dlls it needs. -+ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 -+ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 -+ fast_install=no -+ ;; -+ *) no_install=yes ;; -+ esac -+ continue -+ ;; -+ -+ -no-undefined) -+ allow_undefined=no -+ continue -+ ;; -+ -+ -o) prev=output ;; -+ -+ -release) -+ prev=release -+ continue -+ ;; -+ -+ -rpath) -+ prev=rpath -+ continue -+ ;; -+ -+ -R) -+ prev=xrpath -+ continue -+ ;; -+ -+ -R*) -+ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ $echo "$modename: only absolute run-paths are allowed" 1>&2 -+ exit 1 -+ ;; -+ esac -+ case "$xrpath " in -+ *" $dir "*) ;; -+ *) xrpath="$xrpath $dir" ;; -+ esac -+ continue -+ ;; -+ -+ -static) -+ # The effects of -static are defined in a previous loop. -+ # We used to do the same as -all-static on platforms that -+ # didn't have a PIC flag, but the assumption that the effects -+ # would be equivalent was wrong. It would break on at least -+ # Digital Unix and AIX. -+ continue -+ ;; -+ -+ -thread-safe) -+ thread_safe=yes -+ continue -+ ;; -+ -+ -version-info) -+ prev=vinfo -+ continue -+ ;; -+ -+ -Wc,*) -+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` -+ arg= -+ save_ifs="$IFS"; IFS=',' -+ for flag in $args; do -+ IFS="$save_ifs" -+ case $flag in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ flag="\"$flag\"" -+ ;; -+ esac -+ arg="$arg $wl$flag" -+ compiler_flags="$compiler_flags $flag" -+ done -+ IFS="$save_ifs" -+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"` -+ ;; -+ -+ -Wl,*) -+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` -+ arg= -+ save_ifs="$IFS"; IFS=',' -+ for flag in $args; do -+ IFS="$save_ifs" -+ case $flag in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ flag="\"$flag\"" -+ ;; -+ esac -+ arg="$arg $wl$flag" -+ compiler_flags="$compiler_flags $wl$flag" -+ linker_flags="$linker_flags $flag" -+ done -+ IFS="$save_ifs" -+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"` -+ ;; -+ -+ -Xcompiler) -+ prev=xcompiler -+ continue -+ ;; -+ -+ -Xlinker) -+ prev=xlinker -+ continue -+ ;; -+ -+ # Some other compiler flag. -+ -* | +*) -+ # Unknown arguments in both finalize_command and compile_command need -+ # to be aesthetically quoted because they are evaled later. -+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -+ case $arg in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ arg="\"$arg\"" -+ ;; -+ esac -+ ;; -+ -+ *.lo | *.$objext) -+ # A library or standard object. -+ if test "$prev" = dlfiles; then -+ # This file was specified with -dlopen. -+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -+ dlfiles="$dlfiles $arg" -+ prev= -+ continue -+ else -+ # If libtool objects are unsupported, then we need to preload. -+ prev=dlprefiles -+ fi -+ fi -+ -+ if test "$prev" = dlprefiles; then -+ # Preload the old-style object. -+ dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` -+ prev= -+ else -+ case $arg in -+ *.lo) libobjs="$libobjs $arg" ;; -+ *) objs="$objs $arg" ;; -+ esac -+ fi -+ ;; -+ -+ *.$libext) -+ # An archive. -+ deplibs="$deplibs $arg" -+ old_deplibs="$old_deplibs $arg" -+ continue -+ ;; -+ -+ *.la) -+ # A libtool-controlled library. -+ -+ if test "$prev" = dlfiles; then -+ # This library was specified with -dlopen. -+ dlfiles="$dlfiles $arg" -+ prev= -+ elif test "$prev" = dlprefiles; then -+ # The library was specified with -dlpreopen. -+ dlprefiles="$dlprefiles $arg" -+ prev= -+ else -+ deplibs="$deplibs $arg" -+ fi -+ continue -+ ;; -+ -+ # Some other compiler argument. -+ *) -+ # Unknown arguments in both finalize_command and compile_command need -+ # to be aesthetically quoted because they are evaled later. -+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -+ case $arg in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ arg="\"$arg\"" -+ ;; -+ esac -+ ;; -+ esac # arg -+ -+ # Now actually substitute the argument into the commands. -+ if test -n "$arg"; then -+ compile_command="$compile_command $arg" -+ finalize_command="$finalize_command $arg" -+ fi -+ done # argument parsing loop -+ -+ if test -n "$prev"; then -+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then -+ eval arg=\"$export_dynamic_flag_spec\" -+ compile_command="$compile_command $arg" -+ finalize_command="$finalize_command $arg" -+ fi -+ -+ # calculate the name of the file, without its directory -+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` -+ libobjs_save="$libobjs" -+ -+ if test -n "$shlibpath_var"; then -+ # get the directories listed in $shlibpath_var -+ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` -+ else -+ shlib_search_path= -+ fi -+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" -+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" -+ -+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` -+ if test "X$output_objdir" = "X$output"; then -+ output_objdir="$objdir" -+ else -+ output_objdir="$output_objdir/$objdir" -+ fi -+ # Create the object directory. -+ if test ! -d $output_objdir; then -+ $show "$mkdir $output_objdir" -+ $run $mkdir $output_objdir -+ status=$? -+ if test $status -ne 0 && test ! -d $output_objdir; then -+ exit $status -+ fi -+ fi -+ -+ # Determine the type of output -+ case $output in -+ "") -+ $echo "$modename: you must specify an output file" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ ;; -+ *.$libext) linkmode=oldlib ;; -+ *.lo | *.$objext) linkmode=obj ;; -+ *.la) linkmode=lib ;; -+ *) linkmode=prog ;; # Anything else should be a program. -+ esac -+ -+ specialdeplibs= -+ libs= -+ # Find all interdependent deplibs by searching for libraries -+ # that are linked more than once (e.g. -la -lb -la) -+ for deplib in $deplibs; do -+ if test "X$duplicate_deps" = "Xyes" ; then -+ case "$libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ libs="$libs $deplib" -+ done -+ deplibs= -+ newdependency_libs= -+ newlib_search_path= -+ need_relink=no # whether we're linking any uninstalled libtool libraries -+ notinst_deplibs= # not-installed libtool libraries -+ notinst_path= # paths that contain not-installed libtool libraries -+ case $linkmode in -+ lib) -+ passes="conv link" -+ for file in $dlfiles $dlprefiles; do -+ case $file in -+ *.la) ;; -+ *) -+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ ;; -+ prog) -+ compile_deplibs= -+ finalize_deplibs= -+ alldeplibs=no -+ newdlfiles= -+ newdlprefiles= -+ passes="conv scan dlopen dlpreopen link" -+ ;; -+ *) passes="conv" -+ ;; -+ esac -+ for pass in $passes; do -+ if test $linkmode = prog; then -+ # Determine which files to process -+ case $pass in -+ dlopen) -+ libs="$dlfiles" -+ save_deplibs="$deplibs" # Collect dlpreopened libraries -+ deplibs= -+ ;; -+ dlpreopen) libs="$dlprefiles" ;; -+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; -+ esac -+ fi -+ for deplib in $libs; do -+ lib= -+ found=no -+ case $deplib in -+ -l*) -+ if test $linkmode = oldlib && test $linkmode = obj; then -+ $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 -+ continue -+ fi -+ if test $pass = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` -+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do -+ # Search the libtool library -+ lib="$searchdir/lib${name}.la" -+ if test -f "$lib"; then -+ found=yes -+ break -+ fi -+ done -+ if test "$found" != yes; then -+ # deplib doesn't seem to be a libtool library -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" -+ fi -+ continue -+ fi -+ ;; # -l -+ -L*) -+ case $linkmode in -+ lib) -+ deplibs="$deplib $deplibs" -+ test $pass = conv && continue -+ newdependency_libs="$deplib $newdependency_libs" -+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` -+ ;; -+ prog) -+ if test $pass = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ if test $pass = scan; then -+ deplibs="$deplib $deplibs" -+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` -+ else -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ fi -+ ;; -+ *) -+ $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 -+ ;; -+ esac # linkmode -+ continue -+ ;; # -L -+ -R*) -+ if test $pass = link; then -+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` -+ # Make sure the xrpath contains only unique directories. -+ case "$xrpath " in -+ *" $dir "*) ;; -+ *) xrpath="$xrpath $dir" ;; -+ esac -+ fi -+ deplibs="$deplib $deplibs" -+ continue -+ ;; -+ *.la) lib="$deplib" ;; -+ *.$libext) -+ if test $pass = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ case $linkmode in -+ lib) -+ if test "$deplibs_check_method" != pass_all; then -+ echo -+ echo "*** Warning: Trying to link with static lib archive $deplib." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because the file extensions .$libext of this argument makes me believe" -+ echo "*** that it is just a static archive that I should not used here." -+ else -+ echo -+ echo "*** Warning: Linking the shared library $output against the" -+ echo "*** static library $deplib is not portable!" -+ deplibs="$deplib $deplibs" -+ fi -+ continue -+ ;; -+ prog) -+ if test $pass != link; then -+ deplibs="$deplib $deplibs" -+ else -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ fi -+ continue -+ ;; -+ esac # linkmode -+ ;; # *.$libext -+ *.lo | *.$objext) -+ if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -+ # If there is no dlopen support or we're linking statically, -+ # we need to preload. -+ newdlprefiles="$newdlprefiles $deplib" -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ newdlfiles="$newdlfiles $deplib" -+ fi -+ continue -+ ;; -+ %DEPLIBS%) -+ alldeplibs=yes -+ continue -+ ;; -+ esac # case $deplib -+ if test $found = yes || test -f "$lib"; then : -+ else -+ $echo "$modename: cannot find the library \`$lib'" 1>&2 -+ exit 1 -+ fi -+ -+ # Check to see that this really is a libtool archive. -+ if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -+ else -+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -+ exit 1 -+ fi -+ -+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` -+ test "X$ladir" = "X$lib" && ladir="." -+ -+ dlname= -+ dlopen= -+ dlpreopen= -+ libdir= -+ library_names= -+ old_library= -+ # If the library was installed with an old release of libtool, -+ # it will not redefine variable installed. -+ installed=yes -+ -+ # Read the .la file -+ case $lib in -+ */* | *\\*) . $lib ;; -+ *) . ./$lib ;; -+ esac -+ -+ if test "$linkmode,$pass" = "lib,link" || -+ test "$linkmode,$pass" = "prog,scan" || -+ { test $linkmode = oldlib && test $linkmode = obj; }; then -+ # Add dl[pre]opened files of deplib -+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen" -+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" -+ fi -+ -+ if test $pass = conv; then -+ # Only check for convenience libraries -+ deplibs="$lib $deplibs" -+ if test -z "$libdir"; then -+ if test -z "$old_library"; then -+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 -+ exit 1 -+ fi -+ # It is a libtool convenience library, so add in its objects. -+ convenience="$convenience $ladir/$objdir/$old_library" -+ old_convenience="$old_convenience $ladir/$objdir/$old_library" -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ deplibs="$deplib $deplibs" -+ if test "X$duplicate_deps" = "Xyes" ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ tmp_libs="$tmp_libs $deplib" -+ done -+ elif test $linkmode != prog && test $linkmode != lib; then -+ $echo "$modename: \`$lib' is not a convenience library" 1>&2 -+ exit 1 -+ fi -+ continue -+ fi # $pass = conv -+ -+ # Get the name of the library we link against. -+ linklib= -+ for l in $old_library $library_names; do -+ linklib="$l" -+ done -+ if test -z "$linklib"; then -+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 -+ exit 1 -+ fi -+ -+ # This library was specified with -dlopen. -+ if test $pass = dlopen; then -+ if test -z "$libdir"; then -+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 -+ exit 1 -+ fi -+ if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -+ # If there is no dlname, no dlopen support or we're linking -+ # statically, we need to preload. -+ dlprefiles="$dlprefiles $lib" -+ else -+ newdlfiles="$newdlfiles $lib" -+ fi -+ continue -+ fi # $pass = dlopen -+ -+ # We need an absolute path. -+ case $ladir in -+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; -+ *) -+ abs_ladir=`cd "$ladir" && pwd` -+ if test -z "$abs_ladir"; then -+ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 -+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 -+ abs_ladir="$ladir" -+ fi -+ ;; -+ esac -+ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -+ -+ # Find the relevant object directory and library name. -+ if test "X$installed" = Xyes; then -+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then -+ $echo "$modename: warning: library \`$lib' was moved." 1>&2 -+ dir="$ladir" -+ absdir="$abs_ladir" -+ libdir="$abs_ladir" -+ else -+ dir="$libdir" -+ absdir="$libdir" -+ fi -+ else -+ dir="$ladir/$objdir" -+ absdir="$abs_ladir/$objdir" -+ # Remove this search path later -+ notinst_path="$notinst_path $abs_ladir" -+ fi # $installed = yes -+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` -+ -+ # This library was specified with -dlpreopen. -+ if test $pass = dlpreopen; then -+ if test -z "$libdir"; then -+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 -+ exit 1 -+ fi -+ # Prefer using a static library (so that no silly _DYNAMIC symbols -+ # are required to link). -+ if test -n "$old_library"; then -+ newdlprefiles="$newdlprefiles $dir/$old_library" -+ # Otherwise, use the dlname, so that lt_dlopen finds it. -+ elif test -n "$dlname"; then -+ newdlprefiles="$newdlprefiles $dir/$dlname" -+ else -+ newdlprefiles="$newdlprefiles $dir/$linklib" -+ fi -+ fi # $pass = dlpreopen -+ -+ if test -z "$libdir"; then -+ # Link the convenience library -+ if test $linkmode = lib; then -+ deplibs="$dir/$old_library $deplibs" -+ elif test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$dir/$old_library $compile_deplibs" -+ finalize_deplibs="$dir/$old_library $finalize_deplibs" -+ else -+ deplibs="$lib $deplibs" -+ fi -+ continue -+ fi -+ -+ if test $linkmode = prog && test $pass != link; then -+ newlib_search_path="$newlib_search_path $ladir" -+ deplibs="$lib $deplibs" -+ -+ linkalldeplibs=no -+ if test "$link_all_deplibs" != no || test -z "$library_names" || -+ test "$build_libtool_libs" = no; then -+ linkalldeplibs=yes -+ fi -+ -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ case $deplib in -+ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test -+ esac -+ # Need to link against all dependency_libs? -+ if test $linkalldeplibs = yes; then -+ deplibs="$deplib $deplibs" -+ else -+ # Need to hardcode shared library paths -+ # or/and link against static libraries -+ newdependency_libs="$deplib $newdependency_libs" -+ fi -+ if test "X$duplicate_deps" = "Xyes" ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ tmp_libs="$tmp_libs $deplib" -+ done # for deplib -+ continue -+ fi # $linkmode = prog... -+ -+ link_static=no # Whether the deplib will be linked statically -+ if test -n "$library_names" && -+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then -+ # Link against this shared library -+ -+ if test "$linkmode,$pass" = "prog,link" || -+ { test $linkmode = lib && test $hardcode_into_libs = yes; }; then -+ # Hardcode the library path. -+ # Skip directories that are in the system default run-time -+ # search path. -+ case " $sys_lib_dlsearch_path " in -+ *" $absdir "*) ;; -+ *) -+ case "$compile_rpath " in -+ *" $absdir "*) ;; -+ *) compile_rpath="$compile_rpath $absdir" -+ esac -+ ;; -+ esac -+ case " $sys_lib_dlsearch_path " in -+ *" $libdir "*) ;; -+ *) -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" -+ esac -+ ;; -+ esac -+ if test $linkmode = prog; then -+ # We need to hardcode the library path -+ if test -n "$shlibpath_var"; then -+ # Make sure the rpath contains only unique directories. -+ case "$temp_rpath " in -+ *" $dir "*) ;; -+ *" $absdir "*) ;; -+ *) temp_rpath="$temp_rpath $dir" ;; -+ esac -+ fi -+ fi -+ fi # $linkmode,$pass = prog,link... -+ -+ if test "$alldeplibs" = yes && -+ { test "$deplibs_check_method" = pass_all || -+ { test "$build_libtool_libs" = yes && -+ test -n "$library_names"; }; }; then -+ # We only need to search for static libraries -+ continue -+ fi -+ -+ if test "$installed" = no; then -+ notinst_deplibs="$notinst_deplibs $lib" -+ need_relink=yes -+ fi -+ -+ if test -n "$old_archive_from_expsyms_cmds"; then -+ # figure out the soname -+ set dummy $library_names -+ realname="$2" -+ shift; shift -+ libname=`eval \\$echo \"$libname_spec\"` -+ # use dlname if we got it. it's perfectly good, no? -+ if test -n "$dlname"; then -+ soname="$dlname" -+ elif test -n "$soname_spec"; then -+ # bleh windows -+ case $host in -+ *cygwin*) -+ major=`expr $current - $age` -+ versuffix="-$major" -+ ;; -+ esac -+ eval soname=\"$soname_spec\" -+ else -+ soname="$realname" -+ fi -+ -+ # Make a new name for the extract_expsyms_cmds to use -+ soroot="$soname" -+ soname=`echo $soroot | sed -e 's/^.*\///'` -+ newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" -+ -+ # If the library has no export list, then create one now -+ if test -f "$output_objdir/$soname-def"; then : -+ else -+ $show "extracting exported symbol list from \`$soname'" -+ save_ifs="$IFS"; IFS='~' -+ eval cmds=\"$extract_expsyms_cmds\" -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ fi -+ -+ # Create $newlib -+ if test -f "$output_objdir/$newlib"; then :; else -+ $show "generating import library for \`$soname'" -+ save_ifs="$IFS"; IFS='~' -+ eval cmds=\"$old_archive_from_expsyms_cmds\" -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ fi -+ # make sure the library variables are pointing to the new library -+ dir=$output_objdir -+ linklib=$newlib -+ fi # test -n $old_archive_from_expsyms_cmds -+ -+ if test $linkmode = prog || test "$mode" != relink; then -+ add_shlibpath= -+ add_dir= -+ add= -+ lib_linked=yes -+ case $hardcode_action in -+ immediate | unsupported) -+ if test "$hardcode_direct" = no; then -+ add="$dir/$linklib" -+ elif test "$hardcode_minus_L" = no; then -+ case $host in -+ *-*-sunos*) add_shlibpath="$dir" ;; -+ esac -+ add_dir="-L$dir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = no; then -+ add_shlibpath="$dir" -+ add="-l$name" -+ else -+ lib_linked=no -+ fi -+ ;; -+ relink) -+ if test "$hardcode_direct" = yes; then -+ add="$dir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then -+ add_dir="-L$dir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then -+ add_shlibpath="$dir" -+ add="-l$name" -+ else -+ lib_linked=no -+ fi -+ ;; -+ *) lib_linked=no ;; -+ esac -+ -+ if test "$lib_linked" != yes; then -+ $echo "$modename: configuration error: unsupported hardcode properties" -+ exit 1 -+ fi -+ -+ if test -n "$add_shlibpath"; then -+ case :$compile_shlibpath: in -+ *":$add_shlibpath:"*) ;; -+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; -+ esac -+ fi -+ if test $linkmode = prog; then -+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" -+ test -n "$add" && compile_deplibs="$add $compile_deplibs" -+ else -+ test -n "$add_dir" && deplibs="$add_dir $deplibs" -+ test -n "$add" && deplibs="$add $deplibs" -+ if test "$hardcode_direct" != yes && \ -+ test "$hardcode_minus_L" != yes && \ -+ test "$hardcode_shlibpath_var" = yes; then -+ case :$finalize_shlibpath: in -+ *":$libdir:"*) ;; -+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -+ esac -+ fi -+ fi -+ fi -+ -+ if test $linkmode = prog || test "$mode" = relink; then -+ add_shlibpath= -+ add_dir= -+ add= -+ # Finalize command for both is simple: just hardcode it. -+ if test "$hardcode_direct" = yes; then -+ add="$libdir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then -+ add_dir="-L$libdir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then -+ case :$finalize_shlibpath: in -+ *":$libdir:"*) ;; -+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -+ esac -+ add="-l$name" -+ else -+ # We cannot seem to hardcode it, guess we'll fake it. -+ if test "X$installed" = Xyes; then -+ add_dir="-L$libdir" -+ else -+ add_dir="-L$DESTDIR$libdir" -+ fi -+ add="-l$name" -+ fi -+ -+ if test $linkmode = prog; then -+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" -+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" -+ else -+ test -n "$add_dir" && deplibs="$add_dir $deplibs" -+ test -n "$add" && deplibs="$add $deplibs" -+ fi -+ fi -+ elif test $linkmode = prog; then -+ if test "$alldeplibs" = yes && -+ { test "$deplibs_check_method" = pass_all || -+ { test "$build_libtool_libs" = yes && -+ test -n "$library_names"; }; }; then -+ # We only need to search for static libraries -+ continue -+ fi -+ -+ # Try to link the static library -+ # Here we assume that one of hardcode_direct or hardcode_minus_L -+ # is not unsupported. This is valid on all known static and -+ # shared platforms. -+ if test "$hardcode_direct" != unsupported; then -+ test -n "$old_library" && linklib="$old_library" -+ compile_deplibs="$dir/$linklib $compile_deplibs" -+ finalize_deplibs="$dir/$linklib $finalize_deplibs" -+ else -+ compile_deplibs="-l$name -L$dir $compile_deplibs" -+ finalize_deplibs="-l$name -L$dir $finalize_deplibs" -+ fi -+ elif test "$build_libtool_libs" = yes; then -+ # Not a shared library -+ if test "$deplibs_check_method" != pass_all; then -+ # We're trying link a shared library against a static one -+ # but the system doesn't support it. -+ -+ # Just print a warning and add the library to dependency_libs so -+ # that the program can be linked against the static library. -+ echo -+ echo "*** Warning: This system can not link to static lib archive $lib." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have." -+ if test "$module" = yes; then -+ echo "*** But as you try to build a module library, libtool will still create " -+ echo "*** a static module, that should work as long as the dlopening application" -+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime." -+ if test -z "$global_symbol_pipe"; then -+ echo -+ echo "*** However, this would only work if libtool was able to extract symbol" -+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ echo "*** not find such a program. So, this module is probably useless." -+ echo "*** \`nm' from GNU binutils and a full rebuild may help." -+ fi -+ if test "$build_old_libs" = no; then -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ fi -+ else -+ convenience="$convenience $dir/$old_library" -+ old_convenience="$old_convenience $dir/$old_library" -+ deplibs="$dir/$old_library $deplibs" -+ link_static=yes -+ fi -+ fi # link shared/static library? -+ -+ if test $linkmode = lib; then -+ if test -n "$dependency_libs" && -+ { test $hardcode_into_libs != yes || test $build_old_libs = yes || -+ test $link_static = yes; }; then -+ # Extract -R from dependency_libs -+ temp_deplibs= -+ for libdir in $dependency_libs; do -+ case $libdir in -+ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` -+ case " $xrpath " in -+ *" $temp_xrpath "*) ;; -+ *) xrpath="$xrpath $temp_xrpath";; -+ esac;; -+ *) temp_deplibs="$temp_deplibs $libdir";; -+ esac -+ done -+ dependency_libs="$temp_deplibs" -+ fi -+ -+ newlib_search_path="$newlib_search_path $absdir" -+ # Link against this library -+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" -+ # ... and its dependency_libs -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ newdependency_libs="$deplib $newdependency_libs" -+ if test "X$duplicate_deps" = "Xyes" ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ tmp_libs="$tmp_libs $deplib" -+ done -+ -+ if test $link_all_deplibs != no; then -+ # Add the search paths of all dependency libraries -+ for deplib in $dependency_libs; do -+ case $deplib in -+ -L*) path="$deplib" ;; -+ *.la) -+ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` -+ test "X$dir" = "X$deplib" && dir="." -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; -+ *) -+ absdir=`cd "$dir" && pwd` -+ if test -z "$absdir"; then -+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 -+ absdir="$dir" -+ fi -+ ;; -+ esac -+ if grep "^installed=no" $deplib > /dev/null; then -+ path="-L$absdir/$objdir" -+ else -+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -+ if test -z "$libdir"; then -+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 -+ exit 1 -+ fi -+ if test "$absdir" != "$libdir"; then -+ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 -+ fi -+ path="-L$absdir" -+ fi -+ ;; -+ *) continue ;; -+ esac -+ case " $deplibs " in -+ *" $path "*) ;; -+ *) deplibs="$deplibs $path" ;; -+ esac -+ done -+ fi # link_all_deplibs != no -+ fi # linkmode = lib -+ done # for deplib in $libs -+ if test $pass = dlpreopen; then -+ # Link the dlpreopened libraries before other libraries -+ for deplib in $save_deplibs; do -+ deplibs="$deplib $deplibs" -+ done -+ fi -+ if test $pass != dlopen; then -+ test $pass != scan && dependency_libs="$newdependency_libs" -+ if test $pass != conv; then -+ # Make sure lib_search_path contains only unique directories. -+ lib_search_path= -+ for dir in $newlib_search_path; do -+ case "$lib_search_path " in -+ *" $dir "*) ;; -+ *) lib_search_path="$lib_search_path $dir" ;; -+ esac -+ done -+ newlib_search_path= -+ fi -+ -+ if test "$linkmode,$pass" != "prog,link"; then -+ vars="deplibs" -+ else -+ vars="compile_deplibs finalize_deplibs" -+ fi -+ for var in $vars dependency_libs; do -+ # Add libraries to $var in reverse order -+ eval tmp_libs=\"\$$var\" -+ new_libs= -+ for deplib in $tmp_libs; do -+ case $deplib in -+ -L*) new_libs="$deplib $new_libs" ;; -+ *) -+ case " $specialdeplibs " in -+ *" $deplib "*) new_libs="$deplib $new_libs" ;; -+ *) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) new_libs="$deplib $new_libs" ;; -+ esac -+ ;; -+ esac -+ ;; -+ esac -+ done -+ tmp_libs= -+ for deplib in $new_libs; do -+ case $deplib in -+ -L*) -+ case " $tmp_libs " in -+ *" $deplib "*) ;; -+ *) tmp_libs="$tmp_libs $deplib" ;; -+ esac -+ ;; -+ *) tmp_libs="$tmp_libs $deplib" ;; -+ esac -+ done -+ eval $var=\"$tmp_libs\" -+ done # for var -+ fi -+ if test "$pass" = "conv" && -+ { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then -+ libs="$deplibs" # reset libs -+ deplibs= -+ fi -+ done # for pass -+ if test $linkmode = prog; then -+ dlfiles="$newdlfiles" -+ dlprefiles="$newdlprefiles" -+ fi -+ -+ case $linkmode in -+ oldlib) -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 -+ fi -+ -+ if test -n "$rpath"; then -+ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 -+ fi -+ -+ if test -n "$xrpath"; then -+ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 -+ fi -+ -+ if test -n "$vinfo"; then -+ $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 -+ fi -+ -+ if test -n "$release"; then -+ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 -+ fi -+ -+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -+ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 -+ fi -+ -+ # Now set the variables for building old libraries. -+ build_libtool_libs=no -+ oldlibs="$output" -+ objs="$objs$old_deplibs" -+ ;; -+ -+ lib) -+ # Make sure we only generate libraries of the form `libNAME.la'. -+ case $outputname in -+ lib*) -+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` -+ eval libname=\"$libname_spec\" -+ ;; -+ *) -+ if test "$module" = no; then -+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ if test "$need_lib_prefix" != no; then -+ # Add the "lib" prefix for modules if required -+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` -+ eval libname=\"$libname_spec\" -+ else -+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` -+ fi -+ ;; -+ esac -+ -+ if test -n "$objs"; then -+ if test "$deplibs_check_method" != pass_all; then -+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 -+ exit 1 -+ else -+ echo -+ echo "*** Warning: Linking the shared library $output against the non-libtool" -+ echo "*** objects $objs is not portable!" -+ libobjs="$libobjs $objs" -+ fi -+ fi -+ -+ if test "$dlself" != no; then -+ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 -+ fi -+ -+ set dummy $rpath -+ if test $# -gt 2; then -+ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 -+ fi -+ install_libdir="$2" -+ -+ oldlibs= -+ if test -z "$rpath"; then -+ if test "$build_libtool_libs" = yes; then -+ # Building a libtool convenience library. -+ libext=al -+ oldlibs="$output_objdir/$libname.$libext $oldlibs" -+ build_libtool_libs=convenience -+ build_old_libs=yes -+ fi -+ -+ if test -n "$vinfo"; then -+ $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 -+ fi -+ -+ if test -n "$release"; then -+ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 -+ fi -+ else -+ -+ # Parse the version information argument. -+ save_ifs="$IFS"; IFS=':' -+ set dummy $vinfo 0 0 0 -+ IFS="$save_ifs" -+ -+ if test -n "$8"; then -+ $echo "$modename: too many parameters to \`-version-info'" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ current="$2" -+ revision="$3" -+ age="$4" -+ -+ # Check that each of the things are valid numbers. -+ case $current in -+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; -+ *) -+ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 -+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case $revision in -+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; -+ *) -+ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 -+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ case $age in -+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; -+ *) -+ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 -+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ if test $age -gt $current; then -+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 -+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -+ exit 1 -+ fi -+ -+ # Calculate the version variables. -+ major= -+ versuffix= -+ verstring= -+ case $version_type in -+ none) ;; -+ -+ darwin) -+ # Like Linux, but with the current version available in -+ # verstring for coding it into the library header -+ major=.`expr $current - $age` -+ versuffix="$major.$age.$revision" -+ # Darwin ld doesn't like 0 for these options... -+ minor_current=`expr $current + 1` -+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" -+ ;; -+ -+ freebsd-aout) -+ major=".$current" -+ versuffix=".$current.$revision"; -+ ;; -+ -+ freebsd-elf) -+ major=".$current" -+ versuffix=".$current"; -+ ;; -+ -+ irix | nonstopux) -+ case $version_type in -+ nonstopux) verstring_prefix=nonstopux ;; -+ *) verstring_prefix=sgi ;; -+ esac -+ verstring="$verstring_prefix$major.$revision" -+ -+ major=`expr $current - $age + 1` -+ -+ # Add in all the interfaces that we are compatible with. -+ loop=$revision -+ while test $loop != 0; do -+ iface=`expr $revision - $loop` -+ loop=`expr $loop - 1` -+ verstring="$verstring_prefix$major.$iface:$verstring" -+ done -+ -+ # Before this point, $major must not contain `.'. -+ major=.$major -+ versuffix="$major.$revision" -+ ;; -+ -+ linux) -+ major=.`expr $current - $age` -+ versuffix="$major.$age.$revision" -+ ;; -+ -+ osf) -+ major=`expr $current - $age` -+ versuffix=".$current.$age.$revision" -+ verstring="$current.$age.$revision" -+ -+ # Add in all the interfaces that we are compatible with. -+ loop=$age -+ while test $loop != 0; do -+ iface=`expr $current - $loop` -+ loop=`expr $loop - 1` -+ verstring="$verstring:${iface}.0" -+ done -+ -+ # Make executables depend on our current version. -+ verstring="$verstring:${current}.0" -+ ;; -+ -+ sunos) -+ major=".$current" -+ versuffix=".$current.$revision" -+ ;; -+ -+ windows) -+ # Use '-' rather than '.', since we only want one -+ # extension on DOS 8.3 filesystems. -+ major=`expr $current - $age` -+ versuffix="-$major" -+ ;; -+ -+ *) -+ $echo "$modename: unknown library version type \`$version_type'" 1>&2 -+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ # Clear the version info if we defaulted, and they specified a release. -+ if test -z "$vinfo" && test -n "$release"; then -+ major= -+ verstring="0.0" -+ case $version_type in -+ darwin) -+ # we can't check for "0.0" in archive_cmds due to quoting -+ # problems, so we reset it completely -+ verstring="" -+ ;; -+ *) -+ verstring="0.0" -+ ;; -+ esac -+ if test "$need_version" = no; then -+ versuffix= -+ else -+ versuffix=".0.0" -+ fi -+ fi -+ -+ # Remove version info from name if versioning should be avoided -+ if test "$avoid_version" = yes && test "$need_version" = no; then -+ major= -+ versuffix= -+ verstring="" -+ fi -+ -+ # Check to see if the archive will have undefined symbols. -+ if test "$allow_undefined" = yes; then -+ if test "$allow_undefined_flag" = unsupported; then -+ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 -+ build_libtool_libs=no -+ build_old_libs=yes -+ fi -+ else -+ # Don't allow undefined symbols. -+ allow_undefined_flag="$no_undefined_flag" -+ fi -+ fi -+ -+ if test "$mode" != relink; then -+ # Remove our outputs. -+ $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" -+ $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* -+ fi -+ -+ # Now set the variables for building old libraries. -+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then -+ oldlibs="$oldlibs $output_objdir/$libname.$libext" -+ -+ # Transform .lo files to .o files. -+ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` -+ fi -+ -+ # Eliminate all temporary directories. -+ for path in $notinst_path; do -+ lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` -+ deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` -+ dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` -+ done -+ -+ if test -n "$xrpath"; then -+ # If the user specified any rpath flags, then add them. -+ temp_xrpath= -+ for libdir in $xrpath; do -+ temp_xrpath="$temp_xrpath -R$libdir" -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" ;; -+ esac -+ done -+ if test $hardcode_into_libs != yes || test $build_old_libs = yes; then -+ dependency_libs="$temp_xrpath $dependency_libs" -+ fi -+ fi -+ -+ # Make sure dlfiles contains only unique files that won't be dlpreopened -+ old_dlfiles="$dlfiles" -+ dlfiles= -+ for lib in $old_dlfiles; do -+ case " $dlprefiles $dlfiles " in -+ *" $lib "*) ;; -+ *) dlfiles="$dlfiles $lib" ;; -+ esac -+ done -+ -+ # Make sure dlprefiles contains only unique files -+ old_dlprefiles="$dlprefiles" -+ dlprefiles= -+ for lib in $old_dlprefiles; do -+ case "$dlprefiles " in -+ *" $lib "*) ;; -+ *) dlprefiles="$dlprefiles $lib" ;; -+ esac -+ done -+ -+ if test "$build_libtool_libs" = yes; then -+ if test -n "$rpath"; then -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) -+ # these systems don't actually have a c library (as such)! -+ ;; -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # Rhapsody C library is in the System framework -+ deplibs="$deplibs -framework System" -+ ;; -+ *-*-netbsd*) -+ # Don't link with libc until the a.out ld.so is fixed. -+ ;; -+ *-*-openbsd* | *-*-freebsd*) -+ # Do not include libc due to us having libc/libc_r. -+ ;; -+ *) -+ # Add libc to deplibs on all other systems if necessary. -+ if test $build_libtool_need_lc = "yes"; then -+ deplibs="$deplibs -lc" -+ fi -+ ;; -+ esac -+ fi -+ -+ # Transform deplibs into only deplibs that can be linked in shared. -+ name_save=$name -+ libname_save=$libname -+ release_save=$release -+ versuffix_save=$versuffix -+ major_save=$major -+ # I'm not sure if I'm treating the release correctly. I think -+ # release should show up in the -l (ie -lgmp5) so we don't want to -+ # add it in twice. Is that correct? -+ release="" -+ versuffix="" -+ major="" -+ newdeplibs= -+ droppeddeps=no -+ case $deplibs_check_method in -+ pass_all) -+ # Don't check for shared/static. Everything works. -+ # This might be a little naive. We might want to check -+ # whether the library exists or not. But this is on -+ # osf3 & osf4 and I'm not really sure... Just -+ # implementing what was already the behaviour. -+ newdeplibs=$deplibs -+ ;; -+ test_compile) -+ # This code stresses the "libraries are programs" paradigm to its -+ # limits. Maybe even breaks it. We compile a program, linking it -+ # against the deplibs as a proxy for the library. Then we can check -+ # whether they linked in statically or dynamically with ldd. -+ $rm conftest.c -+ cat > conftest.c <<EOF -+ int main() { return 0; } -+ EOF -+ $rm conftest -+ $CC -o conftest conftest.c $deplibs -+ if test $? -eq 0 ; then -+ ldd_output=`ldd conftest` -+ for i in $deplibs; do -+ name="`expr $i : '-l\(.*\)'`" -+ # If $name is empty we are operating on a -L argument. -+ if test -n "$name" && test "$name" != "0"; then -+ libname=`eval \\$echo \"$libname_spec\"` -+ deplib_matches=`eval \\$echo \"$library_names_spec\"` -+ set dummy $deplib_matches -+ deplib_match=$2 -+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -+ newdeplibs="$newdeplibs $i" -+ else -+ droppeddeps=yes -+ echo -+ echo "*** Warning: dynamic linker does not accept needed library $i." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which I believe you do not have" -+ echo "*** because a test_compile did reveal that the linker did not use it for" -+ echo "*** its dynamic dependency list that programs get resolved with at runtime." -+ fi -+ else -+ newdeplibs="$newdeplibs $i" -+ fi -+ done -+ else -+ # Error occured in the first compile. Let's try to salvage -+ # the situation: Compile a separate program for each library. -+ for i in $deplibs; do -+ name="`expr $i : '-l\(.*\)'`" -+ # If $name is empty we are operating on a -L argument. -+ if test -n "$name" && test "$name" != "0"; then -+ $rm conftest -+ $CC -o conftest conftest.c $i -+ # Did it work? -+ if test $? -eq 0 ; then -+ ldd_output=`ldd conftest` -+ libname=`eval \\$echo \"$libname_spec\"` -+ deplib_matches=`eval \\$echo \"$library_names_spec\"` -+ set dummy $deplib_matches -+ deplib_match=$2 -+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -+ newdeplibs="$newdeplibs $i" -+ else -+ droppeddeps=yes -+ echo -+ echo "*** Warning: dynamic linker does not accept needed library $i." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because a test_compile did reveal that the linker did not use this one" -+ echo "*** as a dynamic dependency that programs can get resolved with at runtime." -+ fi -+ else -+ droppeddeps=yes -+ echo -+ echo "*** Warning! Library $i is needed by this library but I was not able to" -+ echo "*** make it link in! You will probably need to install it or some" -+ echo "*** library that it depends on before this library will be fully" -+ echo "*** functional. Installing it before continuing would be even better." -+ fi -+ else -+ newdeplibs="$newdeplibs $i" -+ fi -+ done -+ fi -+ ;; -+ file_magic*) -+ set dummy $deplibs_check_method -+ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` -+ for a_deplib in $deplibs; do -+ name="`expr $a_deplib : '-l\(.*\)'`" -+ # If $name is empty we are operating on a -L argument. -+ if test -n "$name" && test "$name" != "0"; then -+ libname=`eval \\$echo \"$libname_spec\"` -+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -+ for potent_lib in $potential_libs; do -+ # Follow soft links. -+ if ls -lLd "$potent_lib" 2>/dev/null \ -+ | grep " -> " >/dev/null; then -+ continue -+ fi -+ # The statement above tries to avoid entering an -+ # endless loop below, in case of cyclic links. -+ # We might still enter an endless loop, since a link -+ # loop can be closed while we follow links, -+ # but so what? -+ potlib="$potent_lib" -+ while test -h "$potlib" 2>/dev/null; do -+ potliblink=`ls -ld $potlib | sed 's/.* -> //'` -+ case $potliblink in -+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; -+ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; -+ esac -+ done -+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ -+ | sed 10q \ -+ | egrep "$file_magic_regex" > /dev/null; then -+ newdeplibs="$newdeplibs $a_deplib" -+ a_deplib="" -+ break 2 -+ fi -+ done -+ done -+ if test -n "$a_deplib" ; then -+ droppeddeps=yes -+ echo -+ echo "*** Warning: linker path does not have real file for library $a_deplib." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because I did check the linker path looking for a file starting" -+ if test -z "$potlib" ; then -+ echo "*** with $libname but no candidates were found. (...for file magic test)" -+ else -+ echo "*** with $libname and none of the candidates passed a file format test" -+ echo "*** using a file magic. Last file checked: $potlib" -+ fi -+ fi -+ else -+ # Add a -L argument. -+ newdeplibs="$newdeplibs $a_deplib" -+ fi -+ done # Gone through all deplibs. -+ ;; -+ match_pattern*) -+ set dummy $deplibs_check_method -+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` -+ for a_deplib in $deplibs; do -+ name="`expr $a_deplib : '-l\(.*\)'`" -+ # If $name is empty we are operating on a -L argument. -+ if test -n "$name" && test "$name" != "0"; then -+ libname=`eval \\$echo \"$libname_spec\"` -+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -+ for potent_lib in $potential_libs; do -+ potlib="$potent_lib" # see symlink-check below in file_magic test -+ if eval echo \"$potent_lib\" 2>/dev/null \ -+ | sed 10q \ -+ | egrep "$match_pattern_regex" > /dev/null; then -+ newdeplibs="$newdeplibs $a_deplib" -+ a_deplib="" -+ break 2 -+ fi -+ done -+ done -+ if test -n "$a_deplib" ; then -+ droppeddeps=yes -+ echo -+ echo "*** Warning: linker path does not have real file for library $a_deplib." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because I did check the linker path looking for a file starting" -+ if test -z "$potlib" ; then -+ echo "*** with $libname but no candidates were found. (...for regex pattern test)" -+ else -+ echo "*** with $libname and none of the candidates passed a file format test" -+ echo "*** using a regex pattern. Last file checked: $potlib" -+ fi -+ fi -+ else -+ # Add a -L argument. -+ newdeplibs="$newdeplibs $a_deplib" -+ fi -+ done # Gone through all deplibs. -+ ;; -+ none | unknown | *) -+ newdeplibs="" -+ if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -+ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | -+ grep . >/dev/null; then -+ echo -+ if test "X$deplibs_check_method" = "Xnone"; then -+ echo "*** Warning: inter-library dependencies are not supported in this platform." -+ else -+ echo "*** Warning: inter-library dependencies are not known to be supported." -+ fi -+ echo "*** All declared inter-library dependencies are being dropped." -+ droppeddeps=yes -+ fi -+ ;; -+ esac -+ versuffix=$versuffix_save -+ major=$major_save -+ release=$release_save -+ libname=$libname_save -+ name=$name_save -+ -+ case $host in -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # On Rhapsody replace the C library is the System framework -+ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` -+ ;; -+ esac -+ -+ if test "$droppeddeps" = yes; then -+ if test "$module" = yes; then -+ echo -+ echo "*** Warning: libtool could not satisfy all declared inter-library" -+ echo "*** dependencies of module $libname. Therefore, libtool will create" -+ echo "*** a static module, that should work as long as the dlopening" -+ echo "*** application is linked with the -dlopen flag." -+ if test -z "$global_symbol_pipe"; then -+ echo -+ echo "*** However, this would only work if libtool was able to extract symbol" -+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ echo "*** not find such a program. So, this module is probably useless." -+ echo "*** \`nm' from GNU binutils and a full rebuild may help." -+ fi -+ if test "$build_old_libs" = no; then -+ oldlibs="$output_objdir/$libname.$libext" -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ else -+ echo "*** The inter-library dependencies that have been dropped here will be" -+ echo "*** automatically added whenever a program is linked with this library" -+ echo "*** or is declared to -dlopen it." -+ -+ if test $allow_undefined = no; then -+ echo -+ echo "*** Since this library must not contain undefined symbols," -+ echo "*** because either the platform does not support them or" -+ echo "*** it was explicitly requested with -no-undefined," -+ echo "*** libtool will only create a static version of it." -+ if test "$build_old_libs" = no; then -+ oldlibs="$output_objdir/$libname.$libext" -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ fi -+ fi -+ fi -+ # Done checking deplibs! -+ deplibs=$newdeplibs -+ fi -+ -+ # All the library-specific variables (install_libdir is set above). -+ library_names= -+ old_library= -+ dlname= -+ -+ # Test again, we may have decided not to build it any more -+ if test "$build_libtool_libs" = yes; then -+ if test $hardcode_into_libs = yes; then -+ # Hardcode the library paths -+ hardcode_libdirs= -+ dep_rpath= -+ rpath="$finalize_rpath" -+ test "$mode" != relink && rpath="$compile_rpath$rpath" -+ for libdir in $rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ dep_rpath="$dep_rpath $flag" -+ fi -+ elif test -n "$runpath_var"; then -+ case "$perm_rpath " in -+ *" $libdir "*) ;; -+ *) perm_rpath="$perm_rpath $libdir" ;; -+ esac -+ fi -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval dep_rpath=\"$hardcode_libdir_flag_spec\" -+ fi -+ if test -n "$runpath_var" && test -n "$perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" -+ fi -+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" -+ fi -+ -+ shlibpath="$finalize_shlibpath" -+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" -+ if test -n "$shlibpath"; then -+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" -+ fi -+ -+ # Get the real and link names of the library. -+ eval library_names=\"$library_names_spec\" -+ set dummy $library_names -+ realname="$2" -+ shift; shift -+ -+ if test -n "$soname_spec"; then -+ eval soname=\"$soname_spec\" -+ else -+ soname="$realname" -+ fi -+ test -z "$dlname" && dlname=$soname -+ -+ lib="$output_objdir/$realname" -+ for link -+ do -+ linknames="$linknames $link" -+ done -+ -+ # Ensure that we have .o objects for linkers which dislike .lo -+ # (e.g. aix) in case we are running --disable-static -+ for obj in $libobjs; do -+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` -+ if test "X$xdir" = "X$obj"; then -+ xdir="." -+ else -+ xdir="$xdir" -+ fi -+ baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` -+ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` -+ if test ! -f $xdir/$oldobj; then -+ $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" -+ $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? -+ fi -+ done -+ -+ # Use standard objects if they are pic -+ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ -+ # Prepare the list of exported symbols -+ if test -z "$export_symbols"; then -+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then -+ $show "generating symbol list for \`$libname.la'" -+ export_symbols="$output_objdir/$libname.exp" -+ $run $rm $export_symbols -+ eval cmds=\"$export_symbols_cmds\" -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ if test -n "$export_symbols_regex"; then -+ $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" -+ $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -+ $show "$mv \"${export_symbols}T\" \"$export_symbols\"" -+ $run eval '$mv "${export_symbols}T" "$export_symbols"' -+ fi -+ fi -+ fi -+ -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' -+ fi -+ -+ if test -n "$convenience"; then -+ if test -n "$whole_archive_flag_spec"; then -+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -+ else -+ gentop="$output_objdir/${outputname}x" -+ $show "${rm}r $gentop" -+ $run ${rm}r "$gentop" -+ $show "mkdir $gentop" -+ $run mkdir "$gentop" -+ status=$? -+ if test $status -ne 0 && test ! -d "$gentop"; then -+ exit $status -+ fi -+ generated="$generated $gentop" -+ -+ for xlib in $convenience; do -+ # Extract the objects. -+ case $xlib in -+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -+ *) xabs=`pwd`"/$xlib" ;; -+ esac -+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -+ xdir="$gentop/$xlib" -+ -+ $show "${rm}r $xdir" -+ $run ${rm}r "$xdir" -+ $show "mkdir $xdir" -+ $run mkdir "$xdir" -+ status=$? -+ if test $status -ne 0 && test ! -d "$xdir"; then -+ exit $status -+ fi -+ $show "(cd $xdir && $AR x $xabs)" -+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? -+ -+ libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` -+ done -+ fi -+ fi -+ -+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then -+ eval flag=\"$thread_safe_flag_spec\" -+ linker_flags="$linker_flags $flag" -+ fi -+ -+ # Make a backup of the uninstalled library when relinking -+ if test "$mode" = relink; then -+ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? -+ fi -+ -+ # Do each of the archive commands. -+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -+ eval cmds=\"$archive_expsym_cmds\" -+ else -+ eval cmds=\"$archive_cmds\" -+ fi -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ -+ # Restore the uninstalled library and exit -+ if test "$mode" = relink; then -+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? -+ exit 0 -+ fi -+ -+ # Create links to the real library. -+ for linkname in $linknames; do -+ if test "$realname" != "$linkname"; then -+ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" -+ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? -+ fi -+ done -+ -+ # If -module or -export-dynamic was specified, set the dlname. -+ if test "$module" = yes || test "$export_dynamic" = yes; then -+ # On all known operating systems, these are identical. -+ dlname="$soname" -+ fi -+ fi -+ ;; -+ -+ obj) -+ if test -n "$deplibs"; then -+ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 -+ fi -+ -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 -+ fi -+ -+ if test -n "$rpath"; then -+ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 -+ fi -+ -+ if test -n "$xrpath"; then -+ $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 -+ fi -+ -+ if test -n "$vinfo"; then -+ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 -+ fi -+ -+ if test -n "$release"; then -+ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 -+ fi -+ -+ case $output in -+ *.lo) -+ if test -n "$objs$old_deplibs"; then -+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 -+ exit 1 -+ fi -+ libobj="$output" -+ obj=`$echo "X$output" | $Xsed -e "$lo2o"` -+ ;; -+ *) -+ libobj= -+ obj="$output" -+ ;; -+ esac -+ -+ # Delete the old objects. -+ $run $rm $obj $libobj -+ -+ # Objects from convenience libraries. This assumes -+ # single-version convenience libraries. Whenever we create -+ # different ones for PIC/non-PIC, this we'll have to duplicate -+ # the extraction. -+ reload_conv_objs= -+ gentop= -+ # reload_cmds runs $LD directly, so let us get rid of -+ # -Wl from whole_archive_flag_spec -+ wl= -+ -+ if test -n "$convenience"; then -+ if test -n "$whole_archive_flag_spec"; then -+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" -+ else -+ gentop="$output_objdir/${obj}x" -+ $show "${rm}r $gentop" -+ $run ${rm}r "$gentop" -+ $show "mkdir $gentop" -+ $run mkdir "$gentop" -+ status=$? -+ if test $status -ne 0 && test ! -d "$gentop"; then -+ exit $status -+ fi -+ generated="$generated $gentop" -+ -+ for xlib in $convenience; do -+ # Extract the objects. -+ case $xlib in -+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -+ *) xabs=`pwd`"/$xlib" ;; -+ esac -+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -+ xdir="$gentop/$xlib" -+ -+ $show "${rm}r $xdir" -+ $run ${rm}r "$xdir" -+ $show "mkdir $xdir" -+ $run mkdir "$xdir" -+ status=$? -+ if test $status -ne 0 && test ! -d "$xdir"; then -+ exit $status -+ fi -+ $show "(cd $xdir && $AR x $xabs)" -+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? -+ -+ reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` -+ done -+ fi -+ fi -+ -+ # Create the old-style object. -+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test -+ -+ output="$obj" -+ eval cmds=\"$reload_cmds\" -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ -+ # Exit if we aren't doing a library object file. -+ if test -z "$libobj"; then -+ if test -n "$gentop"; then -+ $show "${rm}r $gentop" -+ $run ${rm}r $gentop -+ fi -+ -+ exit 0 -+ fi -+ -+ if test "$build_libtool_libs" != yes; then -+ if test -n "$gentop"; then -+ $show "${rm}r $gentop" -+ $run ${rm}r $gentop -+ fi -+ -+ # Create an invalid libtool object if no PIC, so that we don't -+ # accidentally link it into a program. -+ $show "echo timestamp > $libobj" -+ $run eval "echo timestamp > $libobj" || exit $? -+ exit 0 -+ fi -+ -+ if test -n "$pic_flag" || test "$pic_mode" != default; then -+ # Only do commands if we really have different PIC objects. -+ reload_objs="$libobjs $reload_conv_objs" -+ output="$libobj" -+ eval cmds=\"$reload_cmds\" -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ else -+ # Just create a symlink. -+ $show $rm $libobj -+ $run $rm $libobj -+ xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` -+ if test "X$xdir" = "X$libobj"; then -+ xdir="." -+ else -+ xdir="$xdir" -+ fi -+ baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` -+ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` -+ $show "(cd $xdir && $LN_S $oldobj $baseobj)" -+ $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? -+ fi -+ -+ if test -n "$gentop"; then -+ $show "${rm}r $gentop" -+ $run ${rm}r $gentop -+ fi -+ -+ exit 0 -+ ;; -+ -+ prog) -+ case $host in -+ *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; -+ esac -+ if test -n "$vinfo"; then -+ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 -+ fi -+ -+ if test -n "$release"; then -+ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 -+ fi -+ -+ if test "$preload" = yes; then -+ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && -+ test "$dlopen_self_static" = unknown; then -+ $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." -+ fi -+ fi -+ -+ case $host in -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # On Rhapsody replace the C library is the System framework -+ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` -+ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` -+ ;; -+ esac -+ -+ compile_command="$compile_command $compile_deplibs" -+ finalize_command="$finalize_command $finalize_deplibs" -+ -+ if test -n "$rpath$xrpath"; then -+ # If the user specified any rpath flags, then add them. -+ for libdir in $rpath $xrpath; do -+ # This is the magic to use -rpath. -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" ;; -+ esac -+ done -+ fi -+ -+ # Now hardcode the library paths -+ rpath= -+ hardcode_libdirs= -+ for libdir in $compile_rpath $finalize_rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ rpath="$rpath $flag" -+ fi -+ elif test -n "$runpath_var"; then -+ case "$perm_rpath " in -+ *" $libdir "*) ;; -+ *) perm_rpath="$perm_rpath $libdir" ;; -+ esac -+ fi -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -+ case :$dllsearchpath: in -+ *":$libdir:"*) ;; -+ *) dllsearchpath="$dllsearchpath:$libdir";; -+ esac -+ ;; -+ esac -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval rpath=\" $hardcode_libdir_flag_spec\" -+ fi -+ compile_rpath="$rpath" -+ -+ rpath= -+ hardcode_libdirs= -+ for libdir in $finalize_rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ rpath="$rpath $flag" -+ fi -+ elif test -n "$runpath_var"; then -+ case "$finalize_perm_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; -+ esac -+ fi -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval rpath=\" $hardcode_libdir_flag_spec\" -+ fi -+ finalize_rpath="$rpath" -+ -+ if test -n "$libobjs" && test "$build_old_libs" = yes; then -+ # Transform all the library objects into standard objects. -+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ fi -+ -+ dlsyms= -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ if test -n "$NM" && test -n "$global_symbol_pipe"; then -+ dlsyms="${outputname}S.c" -+ else -+ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 -+ fi -+ fi -+ -+ if test -n "$dlsyms"; then -+ case $dlsyms in -+ "") ;; -+ *.c) -+ # Discover the nlist of each of the dlfiles. -+ nlist="$output_objdir/${outputname}.nm" -+ -+ $show "$rm $nlist ${nlist}S ${nlist}T" -+ $run $rm "$nlist" "${nlist}S" "${nlist}T" -+ -+ # Parse the name list into a source file. -+ $show "creating $output_objdir/$dlsyms" -+ -+ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -+ /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -+ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ -+ -+ #ifdef __cplusplus -+ extern \"C\" { -+ #endif -+ -+ /* Prevent the only kind of declaration conflicts we can make. */ -+ #define lt_preloaded_symbols some_other_symbol -+ -+ /* External symbol declarations for the compiler. */\ -+ " -+ -+ if test "$dlself" = yes; then -+ $show "generating symbol list for \`$output'" -+ -+ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" -+ -+ # Add our own program objects to the symbol list. -+ progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ for arg in $progfiles; do -+ $show "extracting global C symbols from \`$arg'" -+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" -+ done -+ -+ if test -n "$exclude_expsyms"; then -+ $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' -+ $run eval '$mv "$nlist"T "$nlist"' -+ fi -+ -+ if test -n "$export_symbols_regex"; then -+ $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' -+ $run eval '$mv "$nlist"T "$nlist"' -+ fi -+ -+ # Prepare the list of exported symbols -+ if test -z "$export_symbols"; then -+ export_symbols="$output_objdir/$output.exp" -+ $run $rm $export_symbols -+ $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' -+ else -+ $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' -+ $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' -+ $run eval 'mv "$nlist"T "$nlist"' -+ fi -+ fi -+ -+ for arg in $dlprefiles; do -+ $show "extracting global C symbols from \`$arg'" -+ name=`echo "$arg" | sed -e 's%^.*/%%'` -+ $run eval 'echo ": $name " >> "$nlist"' -+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" -+ done -+ -+ if test -z "$run"; then -+ # Make sure we have at least an empty file. -+ test -f "$nlist" || : > "$nlist" -+ -+ if test -n "$exclude_expsyms"; then -+ egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T -+ $mv "$nlist"T "$nlist" -+ fi -+ -+ # Try sorting and uniquifying the output. -+ if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then -+ : -+ else -+ grep -v "^: " < "$nlist" > "$nlist"S -+ fi -+ -+ if test -f "$nlist"S; then -+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' -+ else -+ echo '/* NONE */' >> "$output_objdir/$dlsyms" -+ fi -+ -+ $echo >> "$output_objdir/$dlsyms" "\ -+ -+ #undef lt_preloaded_symbols -+ -+ #if defined (__STDC__) && __STDC__ -+ # define lt_ptr void * -+ #else -+ # define lt_ptr char * -+ # define const -+ #endif -+ -+ /* The mapping between symbol names and symbols. */ -+ const struct { -+ const char *name; -+ lt_ptr address; -+ } -+ lt_preloaded_symbols[] = -+ {\ -+ " -+ -+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" -+ -+ $echo >> "$output_objdir/$dlsyms" "\ -+ {0, (lt_ptr) 0} -+ }; -+ -+ /* This works around a problem in FreeBSD linker */ -+ #ifdef FREEBSD_WORKAROUND -+ static const void *lt_preloaded_setup() { -+ return lt_preloaded_symbols; -+ } -+ #endif -+ -+ #ifdef __cplusplus -+ } -+ #endif\ -+ " -+ fi -+ -+ pic_flag_for_symtable= -+ case $host in -+ # compiling the symbol table file with pic_flag works around -+ # a FreeBSD bug that causes programs to crash when -lm is -+ # linked before any other PIC object. But we must not use -+ # pic_flag when linking with -static. The problem exists in -+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. -+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) -+ case "$compile_command " in -+ *" -static "*) ;; -+ *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; -+ esac;; -+ *-*-hpux*) -+ case "$compile_command " in -+ *" -static "*) ;; -+ *) pic_flag_for_symtable=" $pic_flag -DPIC";; -+ esac -+ esac -+ -+ # Now compile the dynamic symbol file. -+ $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" -+ $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? -+ -+ # Clean up the generated files. -+ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" -+ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" -+ -+ # Transform the symbol file into the correct name. -+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` -+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` -+ ;; -+ *) -+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 -+ exit 1 -+ ;; -+ esac -+ else -+ # We keep going just in case the user didn't refer to -+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe -+ # really was required. -+ -+ # Nullify the symbol file. -+ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` -+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` -+ fi -+ -+ if test $need_relink = no || test "$build_libtool_libs" != yes; then -+ # Replace the output file specification. -+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -+ link_command="$compile_command$compile_rpath" -+ -+ # We have no uninstalled library dependencies, so finalize right now. -+ $show "$link_command" -+ $run eval "$link_command" -+ status=$? -+ -+ # Delete the generated files. -+ if test -n "$dlsyms"; then -+ $show "$rm $output_objdir/${outputname}S.${objext}" -+ $run $rm "$output_objdir/${outputname}S.${objext}" -+ fi -+ -+ exit $status -+ fi -+ -+ if test -n "$shlibpath_var"; then -+ # We should set the shlibpath_var -+ rpath= -+ for dir in $temp_rpath; do -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) -+ # Absolute path. -+ rpath="$rpath$dir:" -+ ;; -+ *) -+ # Relative path: add a thisdir entry. -+ rpath="$rpath\$thisdir/$dir:" -+ ;; -+ esac -+ done -+ temp_rpath="$rpath" -+ fi -+ -+ if test -n "$compile_shlibpath$finalize_shlibpath"; then -+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" -+ fi -+ if test -n "$finalize_shlibpath"; then -+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" -+ fi -+ -+ compile_var= -+ finalize_var= -+ if test -n "$runpath_var"; then -+ if test -n "$perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " -+ fi -+ if test -n "$finalize_perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $finalize_perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " -+ fi -+ fi -+ -+ if test "$no_install" = yes; then -+ # We don't need to create a wrapper script. -+ link_command="$compile_var$compile_command$compile_rpath" -+ # Replace the output file specification. -+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -+ # Delete the old output file. -+ $run $rm $output -+ # Link the executable and exit -+ $show "$link_command" -+ $run eval "$link_command" || exit $? -+ exit 0 -+ fi -+ -+ if test "$hardcode_action" = relink; then -+ # Fast installation is not supported -+ link_command="$compile_var$compile_command$compile_rpath" -+ relink_command="$finalize_var$finalize_command$finalize_rpath" -+ -+ $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 -+ $echo "$modename: \`$output' will be relinked during installation" 1>&2 -+ else -+ if test "$fast_install" != no; then -+ link_command="$finalize_var$compile_command$finalize_rpath" -+ if test "$fast_install" = yes; then -+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` -+ else -+ # fast_install is set to needless -+ relink_command= -+ fi -+ else -+ link_command="$compile_var$compile_command$compile_rpath" -+ relink_command="$finalize_var$finalize_command$finalize_rpath" -+ fi -+ fi -+ -+ # Replace the output file specification. -+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` -+ -+ # Delete the old output files. -+ $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname -+ -+ $show "$link_command" -+ $run eval "$link_command" || exit $? -+ -+ # Now create the wrapper script. -+ $show "creating $output" -+ -+ # Quote the relink command for shipping. -+ if test -n "$relink_command"; then -+ # Preserve any variables that may affect compiler behavior -+ for var in $variables_saved_for_relink; do -+ if eval test -z \"\${$var+set}\"; then -+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" -+ elif eval var_value=\$$var; test -z "$var_value"; then -+ relink_command="$var=; export $var; $relink_command" -+ else -+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` -+ relink_command="$var=\"$var_value\"; export $var; $relink_command" -+ fi -+ done -+ relink_command="(cd `pwd`; $relink_command)" -+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` -+ fi -+ -+ # Quote $echo for shipping. -+ if test "X$echo" = "X$SHELL $0 --fallback-echo"; then -+ case $0 in -+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; -+ *) qecho="$SHELL `pwd`/$0 --fallback-echo";; -+ esac -+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` -+ else -+ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` -+ fi -+ -+ # Only actually do things if our run command is non-null. -+ if test -z "$run"; then -+ # win32 will think the script is a binary if it has -+ # a .exe suffix, so we strip it off here. -+ case $output in -+ *.exe) output=`echo $output|sed 's,.exe$,,'` ;; -+ esac -+ # test for cygwin because mv fails w/o .exe extensions -+ case $host in -+ *cygwin*) exeext=.exe ;; -+ *) exeext= ;; -+ esac -+ $rm $output -+ trap "$rm $output; exit 1" 1 2 15 -+ -+ $echo > $output "\ -+ #! $SHELL -+ -+ # $output - temporary wrapper script for $objdir/$outputname -+ # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -+ # -+ # The $output program cannot be directly executed until all the libtool -+ # libraries that it depends on are installed. -+ # -+ # This wrapper script should never be moved out of the build directory. -+ # If it is, it will not operate correctly. -+ -+ # Sed substitution that helps us do robust quoting. It backslashifies -+ # metacharacters that are still active within double-quoted strings. -+ Xsed='sed -e 1s/^X//' -+ sed_quote_subst='$sed_quote_subst' -+ -+ # The HP-UX ksh and POSIX shell print the target directory to stdout -+ # if CDPATH is set. -+ if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi -+ -+ relink_command=\"$relink_command\" -+ -+ # This environment variable determines our operation mode. -+ if test \"\$libtool_install_magic\" = \"$magic\"; then -+ # install mode needs the following variable: -+ notinst_deplibs='$notinst_deplibs' -+ else -+ # When we are sourced in execute mode, \$file and \$echo are already set. -+ if test \"\$libtool_execute_magic\" != \"$magic\"; then -+ echo=\"$qecho\" -+ file=\"\$0\" -+ # Make sure echo works. -+ if test \"X\$1\" = X--no-reexec; then -+ # Discard the --no-reexec flag, and continue. -+ shift -+ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then -+ # Yippee, \$echo works! -+ : -+ else -+ # Restart under the correct shell, and then maybe \$echo will work. -+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} -+ fi -+ fi\ -+ " -+ $echo >> $output "\ -+ -+ # Find the directory that this script lives in. -+ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` -+ test \"x\$thisdir\" = \"x\$file\" && thisdir=. -+ -+ # Follow symbolic links until we get to the real thisdir. -+ file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` -+ while test -n \"\$file\"; do -+ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` -+ -+ # If there was a directory component, then change thisdir. -+ if test \"x\$destdir\" != \"x\$file\"; then -+ case \"\$destdir\" in -+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; -+ *) thisdir=\"\$thisdir/\$destdir\" ;; -+ esac -+ fi -+ -+ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` -+ file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` -+ done -+ -+ # Try to get the absolute directory name. -+ absdir=\`cd \"\$thisdir\" && pwd\` -+ test -n \"\$absdir\" && thisdir=\"\$absdir\" -+ " -+ -+ if test "$fast_install" = yes; then -+ echo >> $output "\ -+ program=lt-'$outputname'$exeext -+ progdir=\"\$thisdir/$objdir\" -+ -+ if test ! -f \"\$progdir/\$program\" || \\ -+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ -+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then -+ -+ file=\"\$\$-\$program\" -+ -+ if test ! -d \"\$progdir\"; then -+ $mkdir \"\$progdir\" -+ else -+ $rm \"\$progdir/\$file\" -+ fi" -+ -+ echo >> $output "\ -+ -+ # relink executable if necessary -+ if test -n \"\$relink_command\"; then -+ if relink_command_output=\`eval \$relink_command 2>&1\`; then : -+ else -+ $echo \"\$relink_command_output\" >&2 -+ $rm \"\$progdir/\$file\" -+ exit 1 -+ fi -+ fi -+ -+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || -+ { $rm \"\$progdir/\$program\"; -+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } -+ $rm \"\$progdir/\$file\" -+ fi" -+ else -+ echo >> $output "\ -+ program='$outputname' -+ progdir=\"\$thisdir/$objdir\" -+ " -+ fi -+ -+ echo >> $output "\ -+ -+ if test -f \"\$progdir/\$program\"; then" -+ -+ # Export our shlibpath_var if we have one. -+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -+ $echo >> $output "\ -+ # Add our own library path to $shlibpath_var -+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" -+ -+ # Some systems cannot cope with colon-terminated $shlibpath_var -+ # The second colon is a workaround for a bug in BeOS R4 sed -+ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` -+ -+ export $shlibpath_var -+ " -+ fi -+ -+ # fixup the dll searchpath if we need to. -+ if test -n "$dllsearchpath"; then -+ $echo >> $output "\ -+ # Add the dll search path components to the executable PATH -+ PATH=$dllsearchpath:\$PATH -+ " -+ fi -+ -+ $echo >> $output "\ -+ if test \"\$libtool_execute_magic\" != \"$magic\"; then -+ # Run the actual program with our arguments. -+ " -+ case $host in -+ # win32 systems need to use the prog path for dll -+ # lookup to work -+ *-*-cygwin* | *-*-pw32*) -+ $echo >> $output "\ -+ exec \$progdir/\$program \${1+\"\$@\"} -+ " -+ ;; -+ -+ # Backslashes separate directories on plain windows -+ *-*-mingw | *-*-os2*) -+ $echo >> $output "\ -+ exec \$progdir\\\\\$program \${1+\"\$@\"} -+ " -+ ;; -+ -+ *) -+ $echo >> $output "\ -+ # Export the path to the program. -+ PATH=\"\$progdir:\$PATH\" -+ export PATH -+ -+ exec \$program \${1+\"\$@\"} -+ " -+ ;; -+ esac -+ $echo >> $output "\ -+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" -+ exit 1 -+ fi -+ else -+ # The program doesn't exist. -+ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 -+ \$echo \"This script is just a wrapper for \$program.\" 1>&2 -+ echo \"See the $PACKAGE documentation for more information.\" 1>&2 -+ exit 1 -+ fi -+ fi\ -+ " -+ chmod +x $output -+ fi -+ exit 0 -+ ;; -+ esac -+ -+ # See if we need to build an old-fashioned archive. -+ for oldlib in $oldlibs; do -+ -+ if test "$build_libtool_libs" = convenience; then -+ oldobjs="$libobjs_save" -+ addlibs="$convenience" -+ build_libtool_libs=no -+ else -+ if test "$build_libtool_libs" = module; then -+ oldobjs="$libobjs_save" -+ build_libtool_libs=no -+ else -+ oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` -+ fi -+ addlibs="$old_convenience" -+ fi -+ -+ if test -n "$addlibs"; then -+ gentop="$output_objdir/${outputname}x" -+ $show "${rm}r $gentop" -+ $run ${rm}r "$gentop" -+ $show "mkdir $gentop" -+ $run mkdir "$gentop" -+ status=$? -+ if test $status -ne 0 && test ! -d "$gentop"; then -+ exit $status -+ fi -+ generated="$generated $gentop" -+ -+ # Add in members from convenience archives. -+ for xlib in $addlibs; do -+ # Extract the objects. -+ case $xlib in -+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -+ *) xabs=`pwd`"/$xlib" ;; -+ esac -+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -+ xdir="$gentop/$xlib" -+ -+ $show "${rm}r $xdir" -+ $run ${rm}r "$xdir" -+ $show "mkdir $xdir" -+ $run mkdir "$xdir" -+ status=$? -+ if test $status -ne 0 && test ! -d "$xdir"; then -+ exit $status -+ fi -+ $show "(cd $xdir && $AR x $xabs)" -+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? -+ -+ oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` -+ done -+ fi -+ -+ # Do each command in the archive commands. -+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then -+ eval cmds=\"$old_archive_from_new_cmds\" -+ else -+ # Ensure that we have .o objects in place in case we decided -+ # not to build a shared library, and have fallen back to building -+ # static libs even though --disable-static was passed! -+ for oldobj in $oldobjs; do -+ if test ! -f $oldobj; then -+ xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` -+ if test "X$xdir" = "X$oldobj"; then -+ xdir="." -+ else -+ xdir="$xdir" -+ fi -+ baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` -+ obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` -+ $show "(cd $xdir && ${LN_S} $obj $baseobj)" -+ $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? -+ fi -+ done -+ -+ eval cmds=\"$old_archive_cmds\" -+ fi -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ done -+ -+ if test -n "$generated"; then -+ $show "${rm}r$generated" -+ $run ${rm}r$generated -+ fi -+ -+ # Now create the libtool archive. -+ case $output in -+ *.la) -+ old_library= -+ test "$build_old_libs" = yes && old_library="$libname.$libext" -+ $show "creating $output" -+ -+ # Preserve any variables that may affect compiler behavior -+ for var in $variables_saved_for_relink; do -+ if eval test -z \"\${$var+set}\"; then -+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" -+ elif eval var_value=\$$var; test -z "$var_value"; then -+ relink_command="$var=; export $var; $relink_command" -+ else -+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` -+ relink_command="$var=\"$var_value\"; export $var; $relink_command" -+ fi -+ done -+ # Quote the link command for shipping. -+ relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args)" -+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` -+ -+ # Only create the output if not a dry run. -+ if test -z "$run"; then -+ for installed in no yes; do -+ if test "$installed" = yes; then -+ if test -z "$install_libdir"; then -+ break -+ fi -+ output="$output_objdir/$outputname"i -+ # Replace all uninstalled libtool libraries with the installed ones -+ newdependency_libs= -+ for deplib in $dependency_libs; do -+ case $deplib in -+ *.la) -+ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` -+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -+ if test -z "$libdir"; then -+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 -+ exit 1 -+ fi -+ newdependency_libs="$newdependency_libs $libdir/$name" -+ ;; -+ *) newdependency_libs="$newdependency_libs $deplib" ;; -+ esac -+ done -+ dependency_libs="$newdependency_libs" -+ newdlfiles= -+ for lib in $dlfiles; do -+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` -+ if test -z "$libdir"; then -+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -+ exit 1 -+ fi -+ newdlfiles="$newdlfiles $libdir/$name" -+ done -+ dlfiles="$newdlfiles" -+ newdlprefiles= -+ for lib in $dlprefiles; do -+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` -+ if test -z "$libdir"; then -+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -+ exit 1 -+ fi -+ newdlprefiles="$newdlprefiles $libdir/$name" -+ done -+ dlprefiles="$newdlprefiles" -+ fi -+ $rm $output -+ # place dlname in correct position for cygwin -+ tdlname=$dlname -+ case $host,$output,$installed,$module,$dlname in -+ *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; -+ esac -+ $echo > $output "\ -+ # $outputname - a libtool library file -+ # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -+ # -+ # Please DO NOT delete this file! -+ # It is necessary for linking the library. -+ -+ # The name that we can dlopen(3). -+ dlname='$tdlname' -+ -+ # Names of this library. -+ library_names='$library_names' -+ -+ # The name of the static archive. -+ old_library='$old_library' -+ -+ # Libraries that this one depends upon. -+ dependency_libs='$dependency_libs' -+ -+ # Version information for $libname. -+ current=$current -+ age=$age -+ revision=$revision -+ -+ # Is this an already installed library? -+ installed=$installed -+ -+ # Files to dlopen/dlpreopen -+ dlopen='$dlfiles' -+ dlpreopen='$dlprefiles' -+ -+ # Directory that this library needs to be installed in: -+ libdir='$install_libdir'" -+ if test "$installed" = no && test $need_relink = yes; then -+ $echo >> $output "\ -+ relink_command=\"$relink_command\"" -+ fi -+ done -+ fi -+ -+ # Do a symbolic link so that the libtool archive can be found in -+ # LD_LIBRARY_PATH before the program is installed. -+ $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" -+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? -+ ;; -+ esac -+ exit 0 -+ ;; -+ -+ # libtool install mode -+ install) -+ modename="$modename: install" -+ -+ # There may be an optional sh(1) argument at the beginning of -+ # install_prog (especially on Windows NT). -+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || -+ # Allow the use of GNU shtool's install command. -+ $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then -+ # Aesthetically quote it. -+ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` -+ case $arg in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) -+ arg="\"$arg\"" -+ ;; -+ esac -+ install_prog="$arg " -+ arg="$1" -+ shift -+ else -+ install_prog= -+ arg="$nonopt" -+ fi -+ -+ # The real first argument should be the name of the installation program. -+ # Aesthetically quote it. -+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -+ case $arg in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) -+ arg="\"$arg\"" -+ ;; -+ esac -+ install_prog="$install_prog$arg" -+ -+ # We need to accept at least all the BSD install flags. -+ dest= -+ files= -+ opts= -+ prev= -+ install_type= -+ isdir=no -+ stripme= -+ for arg -+ do -+ if test -n "$dest"; then -+ files="$files $dest" -+ dest="$arg" -+ continue -+ fi -+ -+ case $arg in -+ -d) isdir=yes ;; -+ -f) prev="-f" ;; -+ -g) prev="-g" ;; -+ -m) prev="-m" ;; -+ -o) prev="-o" ;; -+ -s) -+ stripme=" -s" -+ continue -+ ;; -+ -*) ;; -+ -+ *) -+ # If the previous option needed an argument, then skip it. -+ if test -n "$prev"; then -+ prev= -+ else -+ dest="$arg" -+ continue -+ fi -+ ;; -+ esac -+ -+ # Aesthetically quote the argument. -+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -+ case $arg in -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) -+ arg="\"$arg\"" -+ ;; -+ esac -+ install_prog="$install_prog $arg" -+ done -+ -+ if test -z "$install_prog"; then -+ $echo "$modename: you must specify an install program" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ if test -n "$prev"; then -+ $echo "$modename: the \`$prev' option requires an argument" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ if test -z "$files"; then -+ if test -z "$dest"; then -+ $echo "$modename: no file or destination specified" 1>&2 -+ else -+ $echo "$modename: you must specify a destination" 1>&2 -+ fi -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ # Strip any trailing slash from the destination. -+ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` -+ -+ # Check to see that the destination is a directory. -+ test -d "$dest" && isdir=yes -+ if test "$isdir" = yes; then -+ destdir="$dest" -+ destname= -+ else -+ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` -+ test "X$destdir" = "X$dest" && destdir=. -+ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` -+ -+ # Not a directory, so check to see that there is only one file specified. -+ set dummy $files -+ if test $# -gt 2; then -+ $echo "$modename: \`$dest' is not a directory" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ fi -+ case $destdir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ for file in $files; do -+ case $file in -+ *.lo) ;; -+ *) -+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ ;; -+ esac -+ -+ # This variable tells wrapper scripts just to set variables rather -+ # than running their programs. -+ libtool_install_magic="$magic" -+ -+ staticlibs= -+ future_libdirs= -+ current_libdirs= -+ for file in $files; do -+ -+ # Do each installation. -+ case $file in -+ *.$libext) -+ # Do the static libraries later. -+ staticlibs="$staticlibs $file" -+ ;; -+ -+ *.la) -+ # Check to see that this really is a libtool archive. -+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -+ else -+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ library_names= -+ old_library= -+ relink_command= -+ # If there is no directory component, then add one. -+ case $file in -+ */* | *\\*) . $file ;; -+ *) . ./$file ;; -+ esac -+ -+ # Add the libdir to current_libdirs if it is the destination. -+ DESTDIR= -+ if test "X$destdir" = "X$libdir"; then -+ case "$current_libdirs " in -+ *" $libdir "*) ;; -+ *) current_libdirs="$current_libdirs $libdir" ;; -+ esac -+ else -+ case "$destdir" in -+ *"$libdir") -+ DESTDIR=`$echo "$destdir" | sed -e 's!'"$libdir"'$!!'` -+ if test "X$destdir" != "X$DESTDIR$libdir"; then -+ DESTDIR= -+ fi -+ ;; -+ esac -+ # Note the libdir as a future libdir. -+ case "$future_libdirs " in -+ *" $libdir "*) ;; -+ *) future_libdirs="$future_libdirs $libdir" ;; -+ esac -+ fi -+ -+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ -+ test "X$dir" = "X$file/" && dir= -+ dir="$dir$objdir" -+ -+ if test -n "$relink_command"; then -+ $echo "$modename: warning: relinking \`$file'" 1>&2 -+ export DESTDIR -+ $show "$relink_command" -+ if $run eval "$relink_command"; then : -+ else -+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 -+ continue -+ fi -+ fi -+ unset DESTDIR -+ -+ # See the names of the shared library. -+ set dummy $library_names -+ if test -n "$2"; then -+ realname="$2" -+ shift -+ shift -+ -+ srcname="$realname" -+ test -n "$relink_command" && srcname="$realname"T -+ -+ # Install the shared library and build the symlinks. -+ $show "$install_prog $dir/$srcname $destdir/$realname" -+ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? -+ if test -n "$stripme" && test -n "$striplib"; then -+ $show "$striplib $destdir/$realname" -+ $run eval "$striplib $destdir/$realname" || exit $? -+ fi -+ -+ if test $# -gt 0; then -+ # Delete the old symlinks, and create new ones. -+ for linkname -+ do -+ if test "$linkname" != "$realname"; then -+ $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" -+ $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" -+ fi -+ done -+ fi -+ -+ # Do each command in the postinstall commands. -+ lib="$destdir/$realname" -+ eval cmds=\"$postinstall_cmds\" -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ fi -+ -+ # Install the pseudo-library for information purposes. -+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -+ instname="$dir/$name"i -+ $show "$install_prog $instname $destdir/$name" -+ $run eval "$install_prog $instname $destdir/$name" || exit $? -+ -+ # Maybe install the static library, too. -+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" -+ ;; -+ -+ *.lo) -+ # Install (i.e. copy) a libtool object. -+ -+ # Figure out destination file name, if it wasn't already specified. -+ if test -n "$destname"; then -+ destfile="$destdir/$destname" -+ else -+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -+ destfile="$destdir/$destfile" -+ fi -+ -+ # Deduce the name of the destination old-style object file. -+ case $destfile in -+ *.lo) -+ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` -+ ;; -+ *.$objext) -+ staticdest="$destfile" -+ destfile= -+ ;; -+ *) -+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ # Install the libtool object if requested. -+ if test -n "$destfile"; then -+ $show "$install_prog $file $destfile" -+ $run eval "$install_prog $file $destfile" || exit $? -+ fi -+ -+ # Install the old object if enabled. -+ if test "$build_old_libs" = yes; then -+ # Deduce the name of the old-style object file. -+ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` -+ -+ $show "$install_prog $staticobj $staticdest" -+ $run eval "$install_prog \$staticobj \$staticdest" || exit $? -+ fi -+ exit 0 -+ ;; -+ -+ *) -+ # Figure out destination file name, if it wasn't already specified. -+ if test -n "$destname"; then -+ destfile="$destdir/$destname" -+ else -+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -+ destfile="$destdir/$destfile" -+ fi -+ -+ # Do a test to see if this is really a libtool program. -+ case $host in -+ *cygwin*|*mingw*) -+ wrapper=`echo $file | sed -e 's,.exe$,,'` -+ ;; -+ *) -+ wrapper=$file -+ ;; -+ esac -+ if (sed -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then -+ notinst_deplibs= -+ relink_command= -+ -+ # If there is no directory component, then add one. -+ case $file in -+ */* | *\\*) . $wrapper ;; -+ *) . ./$wrapper ;; -+ esac -+ -+ # Check the variables that should have been set. -+ if test -z "$notinst_deplibs"; then -+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 -+ exit 1 -+ fi -+ -+ finalize=yes -+ for lib in $notinst_deplibs; do -+ # Check to see that each library is installed. -+ libdir= -+ if test -f "$lib"; then -+ # If there is no directory component, then add one. -+ case $lib in -+ */* | *\\*) . $lib ;; -+ *) . ./$lib ;; -+ esac -+ fi -+ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test -+ if test -n "$libdir" && test ! -f "$libfile"; then -+ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 -+ finalize=no -+ fi -+ done -+ -+ relink_command= -+ # If there is no directory component, then add one. -+ case $file in -+ */* | *\\*) . $wrapper ;; -+ *) . ./$wrapper ;; -+ esac -+ -+ outputname= -+ if test "$fast_install" = no && test -n "$relink_command"; then -+ if test "$finalize" = yes && test -z "$run"; then -+ tmpdir="/tmp" -+ test -n "$TMPDIR" && tmpdir="$TMPDIR" -+ tmpdir="$tmpdir/libtool-$$" -+ if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : -+ else -+ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 -+ continue -+ fi -+ file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -+ outputname="$tmpdir/$file" -+ # Replace the output file specification. -+ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` -+ -+ $show "$relink_command" -+ if $run eval "$relink_command"; then : -+ else -+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 -+ ${rm}r "$tmpdir" -+ continue -+ fi -+ file="$outputname" -+ else -+ $echo "$modename: warning: cannot relink \`$file'" 1>&2 -+ fi -+ else -+ # Install the binary that we compiled earlier. -+ file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` -+ fi -+ fi -+ -+ # remove .exe since cygwin /usr/bin/install will append another -+ # one anyways -+ case $install_prog,$host in -+ /usr/bin/install*,*cygwin*) -+ case $file:$destfile in -+ *.exe:*.exe) -+ # this is ok -+ ;; -+ *.exe:*) -+ destfile=$destfile.exe -+ ;; -+ *:*.exe) -+ destfile=`echo $destfile | sed -e 's,.exe$,,'` -+ ;; -+ esac -+ ;; -+ esac -+ $show "$install_prog$stripme $file $destfile" -+ $run eval "$install_prog\$stripme \$file \$destfile" || exit $? -+ test -n "$outputname" && ${rm}r "$tmpdir" -+ ;; -+ esac -+ done -+ -+ for file in $staticlibs; do -+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -+ -+ # Set up the ranlib parameters. -+ oldlib="$destdir/$name" -+ -+ $show "$install_prog $file $oldlib" -+ $run eval "$install_prog \$file \$oldlib" || exit $? -+ -+ if test -n "$stripme" && test -n "$striplib"; then -+ $show "$old_striplib $oldlib" -+ $run eval "$old_striplib $oldlib" || exit $? -+ fi -+ -+ # Do each command in the postinstall commands. -+ eval cmds=\"$old_postinstall_cmds\" -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || exit $? -+ done -+ IFS="$save_ifs" -+ done -+ -+ if test -n "$future_libdirs"; then -+ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 -+ fi -+ -+ if test -n "$current_libdirs"; then -+ # Maybe just do a dry run. -+ test -n "$run" && current_libdirs=" -n$current_libdirs" -+ exec_cmd='$SHELL $0 --finish$current_libdirs' -+ else -+ exit 0 -+ fi -+ ;; -+ -+ # libtool finish mode -+ finish) -+ modename="$modename: finish" -+ libdirs="$nonopt" -+ admincmds= -+ -+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then -+ for dir -+ do -+ libdirs="$libdirs $dir" -+ done -+ -+ for libdir in $libdirs; do -+ if test -n "$finish_cmds"; then -+ # Do each command in the finish commands. -+ eval cmds=\"$finish_cmds\" -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" || admincmds="$admincmds -+ $cmd" -+ done -+ IFS="$save_ifs" -+ fi -+ if test -n "$finish_eval"; then -+ # Do the single finish_eval. -+ eval cmds=\"$finish_eval\" -+ $run eval "$cmds" || admincmds="$admincmds -+ $cmds" -+ fi -+ done -+ fi -+ -+ # Exit here if they wanted silent mode. -+ test "$show" = ":" && exit 0 -+ -+ echo "----------------------------------------------------------------------" -+ echo "Libraries have been installed in:" -+ for libdir in $libdirs; do -+ echo " $libdir" -+ done -+ echo -+ echo "If you ever happen to want to link against installed libraries" -+ echo "in a given directory, LIBDIR, you must either use libtool, and" -+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'" -+ echo "flag during linking and do at least one of the following:" -+ if test -n "$shlibpath_var"; then -+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable" -+ echo " during execution" -+ fi -+ if test -n "$runpath_var"; then -+ echo " - add LIBDIR to the \`$runpath_var' environment variable" -+ echo " during linking" -+ fi -+ if test -n "$hardcode_libdir_flag_spec"; then -+ libdir=LIBDIR -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ -+ echo " - use the \`$flag' linker flag" -+ fi -+ if test -n "$admincmds"; then -+ echo " - have your system administrator run these commands:$admincmds" -+ fi -+ if test -f /etc/ld.so.conf; then -+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" -+ fi -+ echo -+ echo "See any operating system documentation about shared libraries for" -+ echo "more information, such as the ld(1) and ld.so(8) manual pages." -+ echo "----------------------------------------------------------------------" -+ exit 0 -+ ;; -+ -+ # libtool execute mode -+ execute) -+ modename="$modename: execute" -+ -+ # The first argument is the command name. -+ cmd="$nonopt" -+ if test -z "$cmd"; then -+ $echo "$modename: you must specify a COMMAND" 1>&2 -+ $echo "$help" -+ exit 1 -+ fi -+ -+ # Handle -dlopen flags immediately. -+ for file in $execute_dlfiles; do -+ if test ! -f "$file"; then -+ $echo "$modename: \`$file' is not a file" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ dir= -+ case $file in -+ *.la) -+ # Check to see that this really is a libtool archive. -+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -+ else -+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ # Read the libtool library. -+ dlname= -+ library_names= -+ -+ # If there is no directory component, then add one. -+ case $file in -+ */* | *\\*) . $file ;; -+ *) . ./$file ;; -+ esac -+ -+ # Skip this library if it cannot be dlopened. -+ if test -z "$dlname"; then -+ # Warn if it was a shared library. -+ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" -+ continue -+ fi -+ -+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -+ test "X$dir" = "X$file" && dir=. -+ -+ if test -f "$dir/$objdir/$dlname"; then -+ dir="$dir/$objdir" -+ else -+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 -+ exit 1 -+ fi -+ ;; -+ -+ *.lo) -+ # Just add the directory containing the .lo file. -+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -+ test "X$dir" = "X$file" && dir=. -+ ;; -+ -+ *) -+ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 -+ continue -+ ;; -+ esac -+ -+ # Get the absolute pathname. -+ absdir=`cd "$dir" && pwd` -+ test -n "$absdir" && dir="$absdir" -+ -+ # Now add the directory to shlibpath_var. -+ if eval "test -z \"\$$shlibpath_var\""; then -+ eval "$shlibpath_var=\"\$dir\"" -+ else -+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" -+ fi -+ done -+ -+ # This variable tells wrapper scripts just to set shlibpath_var -+ # rather than running their programs. -+ libtool_execute_magic="$magic" -+ -+ # Check if any of the arguments is a wrapper script. -+ args= -+ for file -+ do -+ case $file in -+ -*) ;; -+ *) -+ # Do a test to see if this is really a libtool program. -+ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -+ # If there is no directory component, then add one. -+ case $file in -+ */* | *\\*) . $file ;; -+ *) . ./$file ;; -+ esac -+ -+ # Transform arg to wrapped name. -+ file="$progdir/$program" -+ fi -+ ;; -+ esac -+ # Quote arguments (to preserve shell metacharacters). -+ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` -+ args="$args \"$file\"" -+ done -+ -+ if test -z "$run"; then -+ if test -n "$shlibpath_var"; then -+ # Export the shlibpath_var. -+ eval "export $shlibpath_var" -+ fi -+ -+ # Restore saved enviroment variables -+ if test "${save_LC_ALL+set}" = set; then -+ LC_ALL="$save_LC_ALL"; export LC_ALL -+ fi -+ if test "${save_LANG+set}" = set; then -+ LANG="$save_LANG"; export LANG -+ fi -+ -+ # Now prepare to actually exec the command. -+ exec_cmd="\$cmd$args" -+ else -+ # Display what would be done. -+ if test -n "$shlibpath_var"; then -+ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" -+ $echo "export $shlibpath_var" -+ fi -+ $echo "$cmd$args" -+ exit 0 -+ fi -+ ;; -+ -+ # libtool clean and uninstall mode -+ clean | uninstall) -+ modename="$modename: $mode" -+ rm="$nonopt" -+ files= -+ rmforce= -+ exit_status=0 -+ -+ # This variable tells wrapper scripts just to set variables rather -+ # than running their programs. -+ libtool_install_magic="$magic" -+ -+ for arg -+ do -+ case $arg in -+ -f) rm="$rm $arg"; rmforce=yes ;; -+ -*) rm="$rm $arg" ;; -+ *) files="$files $arg" ;; -+ esac -+ done -+ -+ if test -z "$rm"; then -+ $echo "$modename: you must specify an RM program" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ fi -+ -+ rmdirs= -+ -+ for file in $files; do -+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -+ if test "X$dir" = "X$file"; then -+ dir=. -+ objdir="$objdir" -+ else -+ objdir="$dir/$objdir" -+ fi -+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -+ test $mode = uninstall && objdir="$dir" -+ -+ # Remember objdir for removal later, being careful to avoid duplicates -+ if test $mode = clean; then -+ case " $rmdirs " in -+ *" $objdir "*) ;; -+ *) rmdirs="$rmdirs $objdir" ;; -+ esac -+ fi -+ -+ # Don't error if the file doesn't exist and rm -f was used. -+ if (test -L "$file") >/dev/null 2>&1 \ -+ || (test -h "$file") >/dev/null 2>&1 \ -+ || test -f "$file"; then -+ : -+ elif test -d "$file"; then -+ exit_status=1 -+ continue -+ elif test "$rmforce" = yes; then -+ continue -+ fi -+ -+ rmfiles="$file" -+ -+ case $name in -+ *.la) -+ # Possibly a libtool archive, so verify it. -+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -+ . $dir/$name -+ -+ # Delete the libtool libraries and symlinks. -+ for n in $library_names; do -+ rmfiles="$rmfiles $objdir/$n" -+ done -+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" -+ test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" -+ -+ if test $mode = uninstall; then -+ if test -n "$library_names"; then -+ # Do each command in the postuninstall commands. -+ eval cmds=\"$postuninstall_cmds\" -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" -+ if test $? != 0 && test "$rmforce" != yes; then -+ exit_status=1 -+ fi -+ done -+ IFS="$save_ifs" -+ fi -+ -+ if test -n "$old_library"; then -+ # Do each command in the old_postuninstall commands. -+ eval cmds=\"$old_postuninstall_cmds\" -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ $show "$cmd" -+ $run eval "$cmd" -+ if test $? != 0 && test "$rmforce" != yes; then -+ exit_status=1 -+ fi -+ done -+ IFS="$save_ifs" -+ fi -+ # FIXME: should reinstall the best remaining shared library. -+ fi -+ fi -+ ;; -+ -+ *.lo) -+ if test "$build_old_libs" = yes; then -+ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` -+ rmfiles="$rmfiles $dir/$oldobj" -+ fi -+ ;; -+ -+ *) -+ # Do a test to see if this is a libtool program. -+ if test $mode = clean && -+ (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -+ relink_command= -+ . $dir/$file -+ -+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" -+ if test "$fast_install" = yes && test -n "$relink_command"; then -+ rmfiles="$rmfiles $objdir/lt-$name" -+ fi -+ fi -+ ;; -+ esac -+ $show "$rm $rmfiles" -+ $run $rm $rmfiles || exit_status=1 -+ done -+ -+ # Try to remove the ${objdir}s in the directories where we deleted files -+ for dir in $rmdirs; do -+ if test -d "$dir"; then -+ $show "rmdir $dir" -+ $run rmdir $dir >/dev/null 2>&1 -+ fi -+ done -+ -+ exit $exit_status -+ ;; -+ -+ "") -+ $echo "$modename: you must specify a MODE" 1>&2 -+ $echo "$generic_help" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ if test -z "$exec_cmd"; then -+ $echo "$modename: invalid operation mode \`$mode'" 1>&2 -+ $echo "$generic_help" 1>&2 -+ exit 1 -+ fi -+ fi # test -z "$show_help" -+ -+ if test -n "$exec_cmd"; then -+ eval exec $exec_cmd -+ exit 1 -+ fi -+ -+ # We need to display help for each of the modes. -+ case $mode in -+ "") $echo \ -+ "Usage: $modename [OPTION]... [MODE-ARG]... -+ -+ Provide generalized library-building support services. -+ -+ --config show all configuration variables -+ --debug enable verbose shell tracing -+ -n, --dry-run display commands without modifying any files -+ --features display basic configuration information and exit -+ --finish same as \`--mode=finish' -+ --help display this help message and exit -+ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] -+ --quiet same as \`--silent' -+ --silent don't print informational messages -+ --version print version information -+ -+ MODE must be one of the following: -+ -+ clean remove files from the build directory -+ compile compile a source file into a libtool object -+ execute automatically set library path, then run a program -+ finish complete the installation of libtool libraries -+ install install libraries or executables -+ link create a library or an executable -+ uninstall remove libraries from an installed directory -+ -+ MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -+ a more detailed description of MODE." -+ exit 0 -+ ;; -+ -+ clean) -+ $echo \ -+ "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... -+ -+ Remove files from the build directory. -+ -+ RM is the name of the program to use to delete files associated with each FILE -+ (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -+ to RM. -+ -+ If FILE is a libtool library, object or program, all the files associated -+ with it are deleted. Otherwise, only FILE itself is deleted using RM." -+ ;; -+ -+ compile) -+ $echo \ -+ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE -+ -+ Compile a source file into a libtool library object. -+ -+ This mode accepts the following additional options: -+ -+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE -+ -prefer-pic try to building PIC objects only -+ -prefer-non-pic try to building non-PIC objects only -+ -static always build a \`.o' file suitable for static linking -+ -+ COMPILE-COMMAND is a command to be used in creating a \`standard' object file -+ from the given SOURCEFILE. -+ -+ The output file name is determined by removing the directory component from -+ SOURCEFILE, then substituting the C source code suffix \`.c' with the -+ library object suffix, \`.lo'." -+ ;; -+ -+ execute) -+ $echo \ -+ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... -+ -+ Automatically set library path, then run a program. -+ -+ This mode accepts the following additional options: -+ -+ -dlopen FILE add the directory containing FILE to the library path -+ -+ This mode sets the library path environment variable according to \`-dlopen' -+ flags. -+ -+ If any of the ARGS are libtool executable wrappers, then they are translated -+ into their corresponding uninstalled binary, and any of their required library -+ directories are added to the library path. -+ -+ Then, COMMAND is executed, with ARGS as arguments." -+ ;; -+ -+ finish) -+ $echo \ -+ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... -+ -+ Complete the installation of libtool libraries. -+ -+ Each LIBDIR is a directory that contains libtool libraries. -+ -+ The commands that this mode executes may require superuser privileges. Use -+ the \`--dry-run' option if you just want to see what would be executed." -+ ;; -+ -+ install) -+ $echo \ -+ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... -+ -+ Install executables or libraries. -+ -+ INSTALL-COMMAND is the installation command. The first component should be -+ either the \`install' or \`cp' program. -+ -+ The rest of the components are interpreted as arguments to that command (only -+ BSD-compatible install options are recognized)." -+ ;; -+ -+ link) -+ $echo \ -+ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... -+ -+ Link object files or libraries together to form another library, or to -+ create an executable program. -+ -+ LINK-COMMAND is a command using the C compiler that you would use to create -+ a program from several object files. -+ -+ The following components of LINK-COMMAND are treated specially: -+ -+ -all-static do not do any dynamic linking at all -+ -avoid-version do not add a version suffix if possible -+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -+ -export-symbols SYMFILE -+ try to export only the symbols listed in SYMFILE -+ -export-symbols-regex REGEX -+ try to export only the symbols matching REGEX -+ -LLIBDIR search LIBDIR for required installed libraries -+ -lNAME OUTPUT-FILE requires the installed library libNAME -+ -module build a library that can dlopened -+ -no-fast-install disable the fast-install mode -+ -no-install link a not-installable executable -+ -no-undefined declare that a library does not refer to external symbols -+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -+ -release RELEASE specify package release information -+ -rpath LIBDIR the created library will eventually be installed in LIBDIR -+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -+ -static do not do any dynamic linking of libtool libraries -+ -version-info CURRENT[:REVISION[:AGE]] -+ specify library version info [each variable defaults to 0] -+ -+ All other options (arguments beginning with \`-') are ignored. -+ -+ Every other argument is treated as a filename. Files ending in \`.la' are -+ treated as uninstalled libtool libraries, other files are standard or library -+ object files. -+ -+ If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -+ only library objects (\`.lo' files) may be specified, and \`-rpath' is -+ required, except when creating a convenience library. -+ -+ If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -+ using \`ar' and \`ranlib', or on Windows using \`lib'. -+ -+ If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -+ is created, otherwise an executable program is created." -+ ;; -+ -+ uninstall) -+ $echo \ -+ "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... -+ -+ Remove libraries from an installation directory. -+ -+ RM is the name of the program to use to delete files associated with each FILE -+ (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -+ to RM. -+ -+ If FILE is a libtool library, all the files associated with it are deleted. -+ Otherwise, only FILE itself is deleted using RM." -+ ;; -+ -+ *) -+ $echo "$modename: invalid operation mode \`$mode'" 1>&2 -+ $echo "$help" 1>&2 -+ exit 1 -+ ;; -+ esac -+ -+ echo -+ $echo "Try \`$modename --help' for more information about other modes." -+ -+ exit 0 -+ -+ # Local Variables: -+ # mode:shell-script -+ # sh-indentation:2 -+ # End: -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/m4/vorbis.m4 xine-lib-1-beta12/m4/vorbis.m4 -*** xine-lib-1-beta12_orig/m4/vorbis.m4 Mon Nov 26 16:07:49 2001 ---- xine-lib-1-beta12/m4/vorbis.m4 Sun May 18 14:52:51 2003 -*************** -*** 18,24 **** - VORBIS_LIBDIR="-L$vorbis_prefix/lib" - fi - -! VORBIS_LIBS="$VORBIS_LIBDIR -lvorbis -lm" - VORBISFILE_LIBS="-lvorbisfile" - VORBISENC_LIBS="-lvorbisenc" - ---- 18,24 ---- - VORBIS_LIBDIR="-L$vorbis_prefix/lib" - fi - -! VORBIS_LIBS="$VORBIS_LIBDIR -lvorbisidec -lm" - VORBISFILE_LIBS="-lvorbisfile" - VORBISENC_LIBS="-lvorbisenc" - -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/demuxers/Makefile.am xine-lib-1-beta12/src/demuxers/Makefile.am -*** xine-lib-1-beta12_orig/src/demuxers/Makefile.am Thu May 1 15:46:11 2003 ---- xine-lib-1-beta12/src/demuxers/Makefile.am Sun May 18 14:43:33 2003 -*************** -*** 1,4 **** -! AM_CFLAGS = $(THEORA_CFLAGS) $(OGG_CFLAGS) @ANSI_FLAGS@ - - LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic - ---- 1,4 ---- -! AM_CFLAGS = $(THEORA_CFLAGS) $(VORBIS_CFLAGS) $(OGG_CFLAGS) @ANSI_FLAGS@ - - LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic - -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/Makefile.am xine-lib-1-beta12/src/libffmpeg/libavcodec/Makefile.am -*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/Makefile.am Sat May 10 09:04:37 2003 ---- xine-lib-1-beta12/src/libffmpeg/libavcodec/Makefile.am Sun May 18 13:36:25 2003 -*************** -*** 10,18 **** - ppc/dsputil_altivec.c ppc/fft_altivec.c ppc/Makefile.am ppc/mpegvideo_ppc.c \ - ppc/dsputil_altivec.h ppc/idct_altivec.c - -! AM_CFLAGS = $(LIBFFMPEG_CFLAGS) -DCONFIG_RISKY - ASFLAGS = - - LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic - - noinst_LTLIBRARIES = libavcodec.la ---- 10,25 ---- - ppc/dsputil_altivec.c ppc/fft_altivec.c ppc/Makefile.am ppc/mpegvideo_ppc.c \ - ppc/dsputil_altivec.h ppc/idct_altivec.c - -! #AM_CFLAGS = $(LIBFFMPEG_CFLAGS) -DCONFIG_RISKY - ASFLAGS = - -+ if HAVE_ARMV4L -+ AM_CFLAGS = -DARCH_ARMV4L $(LIBFFMPEG_CFLAGS) -+ else -+ AM_CFLAGS = $(LIBFFMPEG_CFLAGS) -+ endif -+ -+ - LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic - - noinst_LTLIBRARIES = libavcodec.la -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/Makefile.am xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/Makefile.am -*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/Makefile.am Wed Oct 9 01:13:39 2002 ---- xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/Makefile.am Sun May 18 13:38:26 2003 -*************** -*** 9,22 **** - - noinst_LTLIBRARIES = libavcodec_armv4l.la - -! libavcodec_armv4l_src = dsputil_arm.c jrevdct_arm.S - libavcodec_armv4l_dummy = libavcodec_armv4l_dummy.c - EXTRA_DIST = $(libavcodec_armv4l_src) $(libavcodec_armv4l_dummy) - -! #if HAVE_ARMV4L -! #armv4l_modules = $(libavcodec_armv4l_src) -! #endif -! armv4l_modules = - - libavcodec_armv4l_la_SOURCES = $(armv4l_modules) $(libavcodec_armv4l_dummy) - ---- 9,22 ---- - - noinst_LTLIBRARIES = libavcodec_armv4l.la - -! libavcodec_armv4l_src = mpegvideo_arm.c dsputil_arm.c jrevdct_arm.S - libavcodec_armv4l_dummy = libavcodec_armv4l_dummy.c - EXTRA_DIST = $(libavcodec_armv4l_src) $(libavcodec_armv4l_dummy) - -! if HAVE_ARMV4L -! armv4l_modules = $(libavcodec_armv4l_src) -! endif -! #armv4l_modules = - - libavcodec_armv4l_la_SOURCES = $(armv4l_modules) $(libavcodec_armv4l_dummy) - -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/dsputil_arm.c xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/dsputil_arm.c -*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/dsputil_arm.c Fri Mar 28 16:38:06 2003 ---- xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/dsputil_arm.c Wed Jul 2 19:51:29 2003 -*************** -*** 48,53 **** ---- 48,54 ---- - if(idct_algo==FF_IDCT_AUTO || idct_algo==FF_IDCT_ARM){ - c->idct_put= arm_idct_put; - c->idct_add= arm_idct_add; -+ /* c->idct = j_rev_dct_ARM; */ - c->idct_permutation_type= FF_LIBMPEG2_IDCT_PERM;/* FF_NO_IDCT_PERM */ - } - } -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/mpegvideo_arm.c xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/mpegvideo_arm.c -*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/mpegvideo_arm.c Wed Dec 31 19:00:00 1969 ---- xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/mpegvideo_arm.c Sun May 18 13:44:55 2003 -*************** -*** 0 **** ---- 1,26 ---- -+ /* -+ * Copyright (c) 2002 Michael Niedermayer -+ * -+ * This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU Lesser General Public -+ * License as published by the Free Software Foundation; either -+ * version 2 of the License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * Lesser General Public License for more details. -+ * -+ * You should have received a copy of the GNU Lesser General Public -+ * License along with this library; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ */ -+ -+ #include "../dsputil.h" -+ #include "../mpegvideo.h" -+ #include "../avcodec.h" -+ -+ void MPV_common_init_armv4l(MpegEncContext *s) -+ { -+ } -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/dsputil.h xine-lib-1-beta12/src/libffmpeg/libavcodec/dsputil.h -*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/dsputil.h Sat May 10 09:04:38 2003 ---- xine-lib-1-beta12/src/libffmpeg/libavcodec/dsputil.h Sun May 18 13:45:56 2003 -*************** -*** 48,53 **** ---- 48,54 ---- - void ff_jpeg_fdct_islow (DCTELEM *data); - - void j_rev_dct (DCTELEM *data); -+ void j_rev_dct_ARM (DCTELEM *data); - - void ff_fdct_mmx(DCTELEM *block); - -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/xine_decoder.c xine-lib-1-beta12/src/libffmpeg/xine_decoder.c -*** xine-lib-1-beta12_orig/src/libffmpeg/xine_decoder.c Sat May 10 09:04:37 2003 ---- xine-lib-1-beta12/src/libffmpeg/xine_decoder.c Mon May 19 18:59:11 2003 -*************** -*** 334,340 **** - this->pp_available = 0; - break; - } -! - /* Detect what cpu accel we have */ - cpu_caps = xine_mm_accel(); - this->pp_flags = PP_FORMAT_420; ---- 334,344 ---- - this->pp_available = 0; - break; - } -! -! #if 0 -! this->pp_available = 0; /* remove post processing shit, probably a bug in the functions checking the quality value!!*/ -! #endif /* if 0 */ -! - /* Detect what cpu accel we have */ - cpu_caps = xine_mm_accel(); - this->pp_flags = PP_FORMAT_420; -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libvorbis/xine_decoder.c xine-lib-1-beta12/src/libvorbis/xine_decoder.c -*** xine-lib-1-beta12_orig/src/libvorbis/xine_decoder.c Thu May 1 17:39:28 2003 ---- xine-lib-1-beta12/src/libvorbis/xine_decoder.c Sun May 18 13:49:30 2003 -*************** -*** 205,211 **** - - } else if (this->output_open) { - -! float **pcm; - int samples; - - if(vorbis_synthesis(&this->vb,op)==0) ---- 205,211 ---- - - } else if (this->output_open) { - -! int **pcm; - int samples; - - if(vorbis_synthesis(&this->vb,op)==0) -*************** -*** 227,235 **** - interleave */ - for(i=0;i<this->vi.channels;i++){ - ogg_int16_t *ptr=audio_buffer->mem+i; -! float *mono=pcm[i]; - for(j=0;j<bout;j++){ -! int val=mono[j]*32767.f; - /* might as well guard against clipping */ - if(val>32767){ - val=32767; ---- 227,235 ---- - interleave */ - for(i=0;i<this->vi.channels;i++){ - ogg_int16_t *ptr=audio_buffer->mem+i; -! int *mono=pcm[i]; - for(j=0;j<bout;j++){ -! int val=mono[j]>>9; - /* might as well guard against clipping */ - if(val>32767){ - val=32767; -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/xine-engine/audio_decoder.c xine-lib-1-beta12/src/xine-engine/audio_decoder.c -*** xine-lib-1-beta12_orig/src/xine-engine/audio_decoder.c Sun Apr 6 19:15:05 2003 ---- xine-lib-1-beta12/src/xine-engine/audio_decoder.c Sun May 18 14:16:05 2003 -*************** -*** 354,360 **** - - pthread_attr_t pth_attrs; - struct sched_param pth_params; -! int err; - - if (stream->audio_out == NULL) { - stream->audio_fifo = NULL; ---- 354,360 ---- - - pthread_attr_t pth_attrs; - struct sched_param pth_params; -! int err, num_audio_buffers, size_audio_buffers; - - if (stream->audio_out == NULL) { - stream->audio_fifo = NULL; -*************** -*** 368,374 **** ---- 368,399 ---- - * We provide buffers of 8k size instead of 2k for demuxers sending - * larger chunks. - */ -+ /* changed the allocation method for the buffer, using the same trick as for the video part, -+ i.e. it will give better possibilities to customize the size. - stream->audio_fifo = fifo_buffer_new (230, 8192); -+ */ -+ -+ num_audio_buffers = stream->xine->config->register_num (stream->xine->config, -+ "audio.num_buffers", -+ 50, -+ "number of audio buffers to allocate (higher values mean smoother playback but higher latency)", -+ NULL, 20, -+ NULL, NULL); -+ -+ -+ size_audio_buffers = stream->xine->config->register_num (stream->xine->config, -+ "audio.size_buffers", -+ 8192, -+ "size of the audio buffers to allocate", -+ NULL, 20, -+ NULL, NULL); -+ -+ -+ /* LOGGING INFO ABOUT THE CURRENT SIZE OF THE BUFFERS: */ -+ fprintf (stderr, "************************* %s:function %s, number of buffers:%d (%d B) [default:50 (400 kB)]\n", __FILE__, __FUNCTION__, num_audio_buffers, num_audio_buffers*size_audio_buffers); -+ stream->audio_fifo = fifo_buffer_new (num_audio_buffers, size_audio_buffers); -+ -+ - stream->audio_channel_user = -1; - stream->audio_channel_auto = -1; - stream->audio_track_map_entries = 0; -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/xine-engine/audio_out.c xine-lib-1-beta12/src/xine-engine/audio_out.c -*** xine-lib-1-beta12_orig/src/xine-engine/audio_out.c Fri Apr 25 18:06:27 2003 ---- xine-lib-1-beta12/src/xine-engine/audio_out.c Sun May 18 14:29:29 2003 -*************** -*** 89,98 **** ---- 89,103 ---- - #define LOG_RESAMPLE_SYNC - */ - -+ /* -+ REPLACED BY CONFIG ENTRIES - #define NUM_AUDIO_BUFFERS 32 - #define AUDIO_BUF_SIZE 32768 - - #define ZERO_BUF_SIZE 5000 -+ */ -+ -+ static int iNumAudioBuffers, iAudioBufSize, iZeroBufSize; - - /* By adding gap errors (difference between reported and expected - * sound card clock) into metronom's vpts_offset we can use its -*************** -*** 117,123 **** ---- 122,133 ---- - * buffers may be dropped or gaps filled with silence. - */ - #define SYNC_TIME_INVERVAL (1 * 90000) -+ -+ /* -+ REPLACED BY CONFIG_ENTRIES - #define SYNC_BUF_INTERVAL NUM_AUDIO_BUFFERS / 2 -+ */ -+ - #define SYNC_GAP_RATE 4 - - /* Alternative for metronom feedback: fix sound card clock drift -*************** -*** 430,440 **** - } - - while (num_frames > 0 && !this->discard_buffers) { -! if (num_frames > ZERO_BUF_SIZE) { - pthread_mutex_lock( &this->driver_lock ); - if(this->driver_open) { -! this->driver->write(this->driver, this->zero_space, ZERO_BUF_SIZE); -! num_frames -= ZERO_BUF_SIZE; - } else - num_frames = 0; - pthread_mutex_unlock( &this->driver_lock ); ---- 440,450 ---- - } - - while (num_frames > 0 && !this->discard_buffers) { -! if (num_frames > iZeroBufSize) { - pthread_mutex_lock( &this->driver_lock ); - if(this->driver_open) { -! this->driver->write(this->driver, this->zero_space, iZeroBufSize); -! num_frames -= iZeroBufSize; - } else - num_frames = 0; - pthread_mutex_unlock( &this->driver_lock ); -*************** -*** 1059,1065 **** - */ - } else if ( abs(gap) < AO_MAX_GAP && abs(gap) > this->gap_tolerance && - cur_time > (last_sync_time + SYNC_TIME_INVERVAL) && -! bufs_since_sync >= SYNC_BUF_INTERVAL && - !this->resample_sync_method ) { - xine_stream_t *stream; - #ifdef LOG ---- 1069,1075 ---- - */ - } else if ( abs(gap) < AO_MAX_GAP && abs(gap) > this->gap_tolerance && - cur_time > (last_sync_time + SYNC_TIME_INVERVAL) && -! bufs_since_sync >= (iNumAudioBuffers/2) && - !this->resample_sync_method ) { - xine_stream_t *stream; - #ifdef LOG -*************** -*** 1786,1791 **** ---- 1796,1826 ---- - static char *resample_modes[] = {"auto", "off", "on", NULL}; - static char *av_sync_methods[] = {"metronom_feedback", "resample", NULL}; - -+ -+ -+ iNumAudioBuffers = config->register_num (config, -+ "audio.out_num_audio_buf", -+ 16, -+ "number of audio buffer on the output side", -+ NULL, 20, -+ NULL, NULL); -+ -+ iAudioBufSize = config->register_num (config, -+ "audio.out_size_audio_buf", -+ 8192, -+ "size of the audio buffers to allocate on the output side", -+ NULL, 20, -+ NULL, NULL); -+ -+ iZeroBufSize = config->register_num (config, -+ "audio.out_size_zero_buf", -+ 2048, -+ "size of the zero buffers to allocate on the output side", -+ NULL, 20, -+ NULL, NULL); -+ -+ -+ - this = xine_xmalloc (sizeof (aos_t)) ; - - this->driver = driver; -*************** -*** 1813,1819 **** - this->audio_paused = 0; - this->flush_audio_driver = 0; - this->discard_buffers = 0; -! this->zero_space = xine_xmalloc (ZERO_BUF_SIZE * 2 * 6); - if (!grab_only) - this->gap_tolerance = driver->get_gap_tolerance (this->driver); - ---- 1848,1854 ---- - this->audio_paused = 0; - this->flush_audio_driver = 0; - this->discard_buffers = 0; -! this->zero_space = xine_xmalloc (iZeroBufSize * 2 * 6); - if (!grab_only) - this->gap_tolerance = driver->get_gap_tolerance (this->driver); - -*************** -*** 1871,1883 **** - this->free_fifo = fifo_new (); - this->out_fifo = fifo_new (); - -! for (i=0; i<NUM_AUDIO_BUFFERS; i++) { - - audio_buffer_t *buf; - - buf = (audio_buffer_t *) xine_xmalloc (sizeof (audio_buffer_t)); -! buf->mem = xine_xmalloc (AUDIO_BUF_SIZE); -! buf->mem_size = AUDIO_BUF_SIZE; - buf->extra_info = malloc(sizeof(extra_info_t)); - - fifo_append (this->free_fifo, buf); ---- 1906,1919 ---- - this->free_fifo = fifo_new (); - this->out_fifo = fifo_new (); - -! -! for (i=0; i<iNumAudioBuffers; i++) { - - audio_buffer_t *buf; - - buf = (audio_buffer_t *) xine_xmalloc (sizeof (audio_buffer_t)); -! buf->mem = xine_xmalloc (iAudioBufSize); -! buf->mem_size = iAudioBufSize; - buf->extra_info = malloc(sizeof(extra_info_t)); - - fifo_append (this->free_fifo, buf); -*************** -*** 1889,1896 **** - audio_buffer_t *buf; - - buf = (audio_buffer_t *) xine_xmalloc (sizeof (audio_buffer_t)); -! buf->mem = xine_xmalloc (4*AUDIO_BUF_SIZE); -! buf->mem_size = 4*AUDIO_BUF_SIZE; - buf->extra_info = malloc(sizeof(extra_info_t)); - - this->frame_buf[i] = buf; ---- 1925,1932 ---- - audio_buffer_t *buf; - - buf = (audio_buffer_t *) xine_xmalloc (sizeof (audio_buffer_t)); -! buf->mem = xine_xmalloc (4*iAudioBufSize); -! buf->mem_size = 4*iAudioBufSize; - buf->extra_info = malloc(sizeof(extra_info_t)); - - this->frame_buf[i] = buf; -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/xine-engine/video_overlay.h xine-lib-1-beta12/src/xine-engine/video_overlay.h -*** xine-lib-1-beta12_orig/src/xine-engine/video_overlay.h Wed Nov 20 08:51:36 2002 ---- xine-lib-1-beta12/src/xine-engine/video_overlay.h Sun May 18 14:39:47 2003 -*************** -*** 32,40 **** - #define CLUT_Y_CR_CB_INIT(_y,_cr,_cb) { (_cb), (_cr), (_y) } - #endif - -! #define MAX_OBJECTS 50 -! #define MAX_EVENTS 50 -! #define MAX_SHOWING 5 - - #define OVERLAY_EVENT_NULL 0 - #define OVERLAY_EVENT_SHOW 1 ---- 32,40 ---- - #define CLUT_Y_CR_CB_INIT(_y,_cr,_cb) { (_cb), (_cr), (_y) } - #endif - -! #define MAX_OBJECTS 3 -! #define MAX_EVENTS 3 -! #define MAX_SHOWING 3 - - #define OVERLAY_EVENT_NULL 0 - #define OVERLAY_EVENT_SHOW 1 -diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/xine-engine/xine.c xine-lib-1-beta12/src/xine-engine/xine.c -*** xine-lib-1-beta12_orig/src/xine-engine/xine.c Sat Apr 26 10:43:33 2003 ---- xine-lib-1-beta12/src/xine-engine/xine.c Sat Aug 9 16:44:20 2003 -*************** -*** 1209,1214 **** ---- 1209,1218 ---- - static char *demux_strategies[] = {"default", "reverse", "content", - "extension", NULL}; - -+ /* specific information: who did compile that: */ -+ printf("\n/!\\ This is xine-lib 1.0beta12 compiled by buildroot and patched by Dilb (don't forget to give this information when reporting a bug) /!\\\n"); -+ -+ - /* initialize color conversion tables and functions */ - init_yuv_conversion(); - |