186 files changed, 0 insertions, 175788 deletions

diff --git a/packages/kexecboot/device_table-oldmmc.txt b/packages/kexecboot/device_table-oldmmc.txt
deleted file mode 100644
index 5c7097cbdb..0000000000
--- a/packages/kexecboot/device_table-oldmmc.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-#<path>	<type> <mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
-#/dev/mem    c      640      0       0       1       1       0        0        -
-#
-#type can be one of: 
-#    f	A regular file
-#    d	Directory
-#    c	Character special device file
-#    b	Block special device file
-#    p	Fifo (named pipe)
-
-/dev		d	755	0	0	-	-	-	-	-
-/dev/initctl	p	600	0	0	-	-	-	-	-
-/dev/apm_bios	c	660	0	46	10	134	-	-	-
-/dev/fb0	c	600	0	0	29	0	-	-	-
-/dev/hda	b	660	0	6	3	0	-	-	-
-/dev/hda	b	660	0	6	3	1	1	1	20
-/dev/kmem	c	640	0	15	1	2	-	-	-
-/dev/mem	c	640	0	15	1	1	-	-	-
-/dev/null	c	666	0	0	1	3	-	-	-
-/dev/ram	b	640	0	0	1	0	0	1	4
-/dev/tty	c	662	0	5	5	0	-	-	-
-/dev/tty	c	666	0	5	4	0	0	1	9
-/dev/ttyS	c	640	0	5	4	64	0	1	1
-/dev/ttySA	c	640	0	5	204	5	0	1	1
-/dev/zero	c	644	0	0	1	5	-	-	-
-/dev/mtd	c	660	0	6	90	0	0	2	8
-/dev/mtdblock	b	640	0	0	31	0	0	1	8
-/dev/console	c	662	0	5	5	1	-	-	-
-/dev/random	c	644	0	0	1	8	-	-	-
-/dev/urandom	c	644	0	0	1	9	-	-	-
-/dev/ptmx	c	644	0	0	5	2	-	-	-
-
-# mmc numbers are assigned dynamicly so if you have other dynamic assigned block devices it may be wrong
-/dev/mmcblk0	b	660	0	6	254	0	-	-	-
-/dev/mmcblk0p	b	660	0	6	254	1	1	1	7
-/dev/event0 	c	660	0	0	13	64	-	-	-
diff --git a/packages/kexecboot/files/angstrom/logo-img.h b/packages/kexecboot/files/angstrom/logo-img.h
deleted file mode 100644
index 7de37c1642..0000000000
--- a/packages/kexecboot/files/angstrom/logo-img.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* GdkPixbuf RGBA C-Source image dump 1-byte-run-length-encoded */
-
-#define LOGO_IMG_ROWSTRIDE (392)
-#define LOGO_IMG_WIDTH (98)
-#define LOGO_IMG_HEIGHT (64)
-#define LOGO_IMG_BYTES_PER_PIXEL (4) /* 3:RGB, 4:RGBA */
-#define LOGO_IMG_RLE_PIXEL_DATA ((uint8*) \
-  "\244\350\354\340\377\2\344\352\351\377\323\335\333\377\340\350\354\340" \
-  "\377\3\277\315\312\377\357\363\362\377\303\320\316\377\337\350\354\340" \
-  "\377\3\305\322\320\377\376\377\377\377\305\322\320\377\241\350\354\340" \
-  "\377\1\341\346\345\377\203\330\336\334\377\2\265\300\275\377\277\310" \
-  "\306\377\270\350\354\340\377\3\305\322\320\377\376\377\377\377\305\322" \
-  "\320\377\240\350\354\340\377\3m\202~\377dzv\377n\203\177\377\202o\204" \
-  "\177\377\2g}y\377\277\310\306\377\270\350\354\340\377\3\305\322\320\377" \
-  "\376\377\377\377\305\322\320\377\237\350\354\340\377\2\271\303\301\377" \
-  "\226\246\243\377\204\350\354\340\377\2\325\333\332\377\305\315\314\377" \
-  "\270\350\354\340\377\3\305\322\320\377\376\377\377\377\305\322\320\377" \
-  "\237\350\354\340\377\2\306\316\314\377\260\274\271\377\276\350\354\340" \
-  "\377\3\305\322\320\377\376\377\377\377\305\322\320\377\240\350\354\340" \
-  "\377\3\247\264\262\377\301\312\310\377\337\343\342\377\202\341\346\345" \
-  "\377\2\274\305\303\377\277\310\306\377\270\350\354\340\377\3\302\320" \
-  "\316\377\373\374\374\377\306\323\321\377\240\350\354\340\377\2r\207\202" \
-  "\377^vq\377\203e|w\377\2`xs\377\277\310\306\377\266\350\354\340\377\6" \
-  "\347\354\353\377\240\267\262\377\230\260\253\377\322\335\333\377\225" \
-  "\256\251\377\250\275\270\377\236\350\354\340\377\2\273\305\303\377\222" \
-  "\242\236\377\204\350\354\340\377\2\323\332\330\377\302\313\311\377\265" \
-  "\350\354\340\377\11\326\340\336\377\230\260\253\377\350\355\354\377\350" \
-  "\354\340\377\335\345\343\377\350\354\340\377\337\347\345\377\224\255" \
-  "\250\377\344\353\351\377\234\350\354\340\377\2\304\314\313\377\262\275" \
-  "\273\377\273\350\354\340\377\1\221\253\246\377\206\350\354\340\377\2" \
-  "\351\355\344\377\223\255\247\377\235\350\354\340\377\3\226\245\242\377" \
-  "\312\321\320\377\350\353\353\377\202\350\354\340\377\2\302\313\311\377" \
-  "\277\310\306\377\264\350\354\340\377\2\277\316\313\377\320\333\330\377" \
-  "\207\350\354\340\377\2\272\312\307\377\325\337\335\377\233\350\354\340" \
-  "\377\2\326\334\333\377Xql\377\204\\to\377\2Zrm\377\277\310\306\377\264" \
-  "\350\354\340\377\1\237\266\261\377\210\350\354\340\377\2\336\346\344" \
-  "\377\264\306\302\377\233\350\354\340\377\2\326\334\333\377\272\304\302" \
-  "\377\204\350\354\340\377\2\321\330\326\377\277\310\306\377\264\350\354" \
-  "\340\377\1\235\264\257\377\210\350\354\340\377\2\341\350\346\377\262" \
-  "\304\301\377\327\350\354\340\377\2\271\312\306\377\327\341\337\377\207" \
-  "\350\354\340\377\2\302\320\315\377\316\332\330\377\234\350\354\340\377" \
-  "\6\322\331\330\377o\204\200\377Vni\377Uni\377i~z\377\304\314\313\377" \
-  "\265\350\354\340\377\12\352\356\346\377\226\257\252\377\350\354\340\377" \
-  "\303\321\316\377\321\334\332\377\350\354\340\377\314\327\325\377\314" \
-  "\330\325\377\350\354\340\377\221\253\246\377\231\350\354\340\377\13\345" \
-  "\351\350\377Zrn\377\337\344\343\377\350\354\340\377o\204\200\377\276" \
-  "\307\305\377\337\344\343\377\341\346\345\377\304\315\313\377t\210\204" \
-  "\377\333\340\337\377\265\350\354\340\377\11\307\324\322\377\240\266\262" \
-  "\377\321\334\332\377\320\332\330\377\256\301\275\377\335\345\344\377" \
-  "\306\323\320\377\231\261\254\377\331\342\340\377\232\350\354\340\377" \
-  "\4\301\312\310\377\350\354\340\377\272\304\302\377\313\323\321\377\204" \
-  "\350\354\340\377\2\342\346\345\377\244\261\257\377\266\350\354\340\377" \
-  "\7\274\314\311\377\362\365\364\377\323\335\333\377\376\376\376\377\317" \
-  "\332\330\377\353\360\357\377\307\324\321\377\233\350\354\340\377\4\263" \
-  "\276\274\377\350\354\340\377\270\302\300\377\321\330\326\377\204\350" \
-  "\354\340\377\2\350\353\353\377\241\256\254\377\266\350\354\340\377\7" \
-  "\306\323\320\377\374\375\374\377\320\333\330\377\374\375\375\377\315" \
-  "\331\327\377\377\377\377\377\301\317\314\377\232\350\354\340\377\6\350" \
-  "\353\353\377`xs\377\345\351\343\377\346\352\342\377w\213\207\377\325" \
-  "\333\332\377\202\350\354\340\377\3\334\341\340\377\201\223\220\377\320" \
-  "\327\326\377\265\350\354\340\377\11\324\336\334\377\352\357\356\377\377" \
-  "\377\377\377\316\331\327\377\274\313\310\377\336\345\344\377\377\377" \
-  "\377\377\333\344\342\377\343\352\350\377\235\350\354\340\377\2\300\311" \
-  "\310\377_vr\377\202Slg\377\2Zrn\377\257\272\270\377\266\350\354\340\377" \
-  "\11\301\317\314\377\376\376\376\377\376\377\377\377\301\317\314\377\350" \
-  "\354\340\377\304\321\317\377\377\377\377\377\373\374\374\377\303\321" \
-  "\316\377\237\350\354\340\377\2\331\336\335\377\326\334\333\377\267\350" \
-  "\354\340\377\12\345\353\352\377\331\342\340\377\377\377\377\377\347\355" \
-  "\354\377\327\340\336\377\350\354\340\377\312\327\324\377\364\366\366" \
-  "\377\377\377\377\377\314\330\326\377\234\350\354\340\377\3\312\322\321" \
-  "\377m\202~\377\310\320\317\377\271\350\354\340\377\4\302\320\315\377" \
-  "\374\375\375\377\377\377\377\377\303\321\317\377\203\350\354\340\377" \
-  "\4\314\330\326\377\377\377\377\377\364\366\366\377\313\327\324\377\233" \
-  "\350\354\340\377\2\265\300\275\377\256\272\267\377\272\350\354\340\377" \
-  "\4\314\327\325\377\377\377\377\377\364\367\366\377\312\326\324\377\203" \
-  "\350\354\340\377\4\302\320\316\377\374\375\375\377\377\377\377\377\303" \
-  "\321\316\377\233\350\354\340\377\2\337\344\343\377\235\253\251\377\204" \
-  "\350\354\340\377\2\335\342\341\377\317\326\325\377\263\350\354\340\377" \
-  "\4\314\330\325\377\362\365\364\377\377\377\377\377\316\331\327\377\204" \
-  "\350\354\340\377\5\343\351\350\377\334\344\342\377\377\377\377\377\345" \
-  "\353\352\377\331\342\340\377\233\350\354\340\377\3\204\226\222\377\211" \
-  "\232\227\377\253\270\265\377\202\257\272\270\377\2\226\246\243\377\277" \
-  "\310\306\377\263\350\354\340\377\4\303\321\316\377\377\377\377\377\374" \
-  "\375\375\377\302\320\315\377\205\350\354\340\377\1\301\317\314\377\202" \
-  "\377\377\377\377\1\300\317\314\377\232\350\354\340\377\2\326\334\333" \
-  "\377|\217\213\377\204\230\247\244\377\2\206\227\224\377\277\310\306\377" \
-  "\262\350\354\340\377\10\332\343\341\377\344\352\351\377\377\377\377\377" \
-  "\335\345\343\377\342\351\347\377\350\354\340\377\350\355\354\377\276" \
-  "\315\312\377\202\350\354\340\377\4\323\335\333\377\353\360\357\377\377" \
-  "\377\377\377\325\337\335\377\232\350\354\340\377\2\343\347\347\377\321" \
-  "\330\326\377\204\350\354\340\377\2\341\345\344\377\325\333\331\377\262" \
-  "\350\354\340\377\4\301\317\314\377\372\373\373\377\377\377\377\377\301" \
-  "\317\315\377\202\350\354\340\377\2\343\352\350\377\316\331\327\377\203" \
-  "\350\354\340\377\4\307\324\321\377\377\377\377\377\365\370\367\377\305" \
-  "\323\321\377\232\350\354\340\377\1\347\352\352\377\204\350\354\340\377" \
-  "\1\237\255\252\377\255\350\354\340\377\3\305\323\320\377\207\244\236" \
-  "\377\222\254\246\377\202\235\264\257\377\5\241\267\263\377\260\302\276" \
-  "\377\321\334\332\377\324\336\334\377\223\254\247\377\202\235\264\257" \
-  "\377\3\232\262\255\377\315\331\327\377\234\263\257\377\202\235\264\257" \
-  "\377\5\227\257\252\377\325\337\335\377\321\334\332\377\254\277\273\377" \
-  "\237\266\262\377\202\235\264\257\377\3\217\252\244\377\207\244\236\377" \
-  "\327\341\337\377\223\350\354\340\377\2\326\334\333\377\272\304\302\377" \
-  "\204\350\354\340\377\2\300\311\307\377\252\266\264\377\254\350\354\340" \
-  "\377\3\312\327\324\377\223\254\247\377\235\264\257\377\202\247\274\267" \
-  "\377\5\233\262\256\377\331\342\340\377\320\333\331\377\257\302\276\377" \
-  "\251\276\271\377\202\247\274\267\377\3\242\270\263\377\315\331\327\377" \
-  "\245\272\266\377\202\247\274\267\377\5\252\276\272\377\262\303\300\377" \
-  "\320\333\331\377\330\341\337\377\231\260\253\377\202\247\274\267\377" \
-  "\3\232\262\255\377\223\254\247\377\333\344\342\377\222\350\354\340\377" \
-  "\3\350\353\353\377\304\315\313\377\255\271\266\377\204\350\353\353\377" \
-  "\2\313\323\321\377\241\256\254\377\261\350\354\340\377\4\307\324\322" \
-  "\377\377\377\377\377\366\370\370\377\306\323\321\377\203\350\354\340" \
-  "\377\2\343\352\350\377\316\331\327\377\204\350\354\340\377\4\301\320" \
-  "\315\377\374\375\374\377\377\377\377\377\301\317\314\377\226\350\354" \
-  "\340\377\4\303\314\312\377^vq\377\\so\377Zrm\377\203^vq\377\3_vr\377" \
-  "r\207\202\377\337\343\342\377\260\350\354\340\377\4\322\334\332\377\355" \
-  "\361\360\377\377\377\377\377\324\335\333\377\205\350\354\340\377\1\274" \
-  "\314\310\377\204\350\354\340\377\5\334\344\342\377\342\351\350\377\377" \
-  "\377\377\377\336\346\345\377\340\347\345\377\227\350\354\340\377\2\326" \
-  "\334\333\377\272\304\302\377\266\350\354\340\377\4\301\320\314\377\377" \
-  "\377\377\377\376\376\376\377\301\317\315\377\213\350\354\340\377\4\302" \
-  "\320\315\377\377\377\377\377\376\376\376\377\301\317\315\377\234\350" \
-  "\354\340\377\1\306\316\314\377\261\350\354\340\377\5\341\350\346\377" \
-  "\335\345\344\377\377\377\377\377\343\352\350\377\333\343\342\377\213" \
-  "\350\354\340\377\4\316\331\327\377\360\364\363\377\377\377\377\377\320" \
-  "\333\331\377\227\350\354\340\377\10\344\350\347\377f|x\377\310\320\317" \
-  "\377\350\354\340\377j\200{\377w\213\207\377o\204\200\377\345\351\350" \
-  "\377\257\350\354\340\377\4\303\320\316\377\374\375\375\377\377\377\377" \
-  "\377\303\321\316\377\215\350\354\340\377\4\312\327\325\377\377\377\377" \
-  "\377\365\370\367\377\311\325\323\377\226\350\354\340\377\10\276\307\305" \
-  "\377\300\311\310\377\350\354\340\377\301\312\310\377v\212\206\377\350" \
-  "\354\340\377\334\341\340\377\251\266\263\377\257\350\354\340\377\4\316" \
-  "\332\327\377\377\377\377\377\363\366\365\377\314\327\325\377\215\350" \
-  "\354\340\377\4\304\321\317\377\373\374\373\377\377\377\377\377\305\322" \
-  "\320\377\226\350\354\340\377\5\264\277\275\377\333\340\337\377\350\354" \
-  "\340\377\206\227\224\377\266\301\277\377\202\350\354\340\377\1\235\253" \
-  "\251\377\256\350\354\340\377\4\311\326\323\377\365\370\367\377\377\377" \
-  "\377\377\312\327\324\377\216\350\354\340\377\5\346\354\353\377\330\341" \
-  "\337\377\377\377\377\377\351\356\355\377\325\337\335\377\225\350\354" \
-  "\340\377\4\325\333\332\377\217\237\234\377\265\300\275\377]up\377\202" \
-  "\350\354\340\377\2\273\305\303\377\266\301\277\377\256\350\354\340\377" \
-  "\4\304\321\317\377\377\377\377\377\373\374\374\377\303\321\316\377\217" \
-  "\350\354\340\377\4\301\317\314\377\377\377\377\377\376\376\376\377\300" \
-  "\317\314\377\226\350\354\340\377\6\261\275\272\377\201\223\220\377\302" \
-  "\313\311\377\350\354\340\377\301\312\310\377\200\223\217\377\256\350" \
-  "\354\340\377\5\327\340\337\377\347\355\354\377\377\377\377\377\331\342" \
-  "\340\377\345\353\352\377\217\350\354\340\377\5\325\337\335\377\351\356" \
-  "\355\377\377\377\377\377\330\341\337\377\346\354\353\377\224\350\354" \
-  "\340\377\2\346\352\351\377\326\334\333\377\263\350\354\340\377\4\301" \
-  "\317\314\377\377\377\377\377\376\377\377\377\300\317\314\377\221\350" \
-  "\354\340\377\4\304\322\317\377\377\377\377\377\374\375\375\377\303\320" \
-  "\316\377\224\350\354\340\377\2\326\334\333\377\203\225\221\377\205\243" \
-  "\261\256\377\2\247\263\261\377\312\321\320\377\253\350\354\340\377\5" \
-  "\347\355\354\377\327\340\336\377\377\377\377\377\351\356\355\377\325" \
-  "\337\335\377\221\350\354\340\377\4\311\325\323\377\365\367\367\377\377" \
-  "\377\377\377\313\327\325\377\225\350\354\340\377\11w\213\207\377\204" \
-  "\226\222\377\240\256\253\377\242\257\255\377\214\234\231\377m\202~\377" \
-  "\240\256\253\377}\220\215\377\236\254\251\377\252\350\354\340\377\4\305" \
-  "\322\317\377\372\373\373\377\377\377\377\377\306\323\320\377\223\350" \
-  "\354\340\377\4\317\333\330\377\377\377\377\377\361\364\364\377\315\331" \
-  "\327\377\223\350\354\340\377\2\336\343\342\377\265\300\275\377\204\350" \
-  "\354\340\377\4\313\323\321\377\306\317\315\377\350\354\340\377\215\236" \
-  "\232\377\252\350\354\340\377\4\311\326\324\377\377\377\377\377\367\371" \
-  "\370\377\310\325\322\377\223\350\354\340\377\4\272\312\307\377\327\341" \
-  "\337\377\332\342\341\377\263\305\302\377\223\350\354\340\377\2\265\300" \
-  "\275\377\331\336\335\377\204\350\354\340\377\5\350\354\342\377\235\253" \
-  "\251\377\350\354\340\377\250\265\262\377\347\353\352\377\250\350\354" \
-  "\340\377\4\316\331\327\377\360\364\363\377\377\377\377\377\320\332\330" \
-  "\377\224\350\354\340\377\5\340\347\345\377\336\345\344\377\377\377\377" \
-  "\377\342\351\347\377\234\263\256\377\222\350\354\340\377\2\313\323\321" \
-  "\377\212\233\230\377\204\350\354\340\377\4\234\252\247\377\265\300\275" \
-  "\377\350\354\340\377\210\232\226\377\251\350\354\340\377\4\302\320\315" \
-  "\377\377\377\377\377\375\376\376\377\301\317\314\377\225\350\354\340" \
-  "\377\5\301\317\314\377\344\353\351\377\350\356\355\377\251\274\270\377" \
-  "\310\325\322\377\222\350\354\340\377\11\225\244\241\377Xql\377k\200|" \
-  "\377l\201}\377Zrn\377\206\227\224\377\350\354\340\377\272\304\302\377" \
-  "\212\233\230\377\250\350\354\340\377\5\335\345\344\377\341\350\347\377" \
-  "\377\377\377\377\340\347\346\377\336\346\344\377\225\350\354\340\377" \
-  "\5\317\332\330\377\353\357\356\377\306\324\321\377\321\333\331\377\244" \
-  "\271\265\377\223\350\354\340\377\4\340\344\344\377\273\305\303\377\271" \
-  "\303\301\377\332\337\336\377\254\350\354\340\377\4\301\320\315\377\376" \
-  "\376\376\377\377\377\377\377\302\320\315\377\227\350\354\340\377\4\306" \
-  "\324\321\377\314\330\326\377\357\363\362\377\264\306\302\377\227\350" \
-  "\354\340\377\2\311\321\317\377\277\310\306\377\251\350\354\340\377\5" \
-  "\352\356\346\377\321\334\332\377\377\377\377\377\357\363\362\377\317" \
-  "\332\330\377\227\350\354\340\377\4\305\322\317\377\351\356\355\377\276" \
-  "\315\312\377\266\307\304\377\222\350\354\340\377\2\204\226\222\377Yq" \
-  "l\377\204Slg\377\1\277\310\306\377\251\350\354\340\377\4\307\325\322" \
-  "\377\367\371\370\377\377\377\377\377\311\325\323\377\231\350\354\340" \
-  "\377\4\275\314\311\377\363\366\365\377\354\360\360\377\322\335\333\377" \
-  "\220\350\354\340\377\2\275\307\305\377\207\230\225\377\204\350\354\340" \
-  "\377\2\321\330\326\377\277\310\306\377\251\350\354\340\377\4\306\323" \
-  "\321\377\377\377\377\377\372\373\373\377\304\322\317\377\231\350\354" \
-  "\340\377\4\301\317\314\377\376\376\376\377\377\377\377\377\301\320\315" \
-  "\377\220\350\354\340\377\2\276\310\306\377\264\277\275\377\256\350\354" \
-  "\340\377\4\324\336\334\377\353\357\357\377\377\377\377\377\326\337\335" \
-  "\377\232\350\354\340\377\5\332\342\340\377\345\353\352\377\377\377\377" \
-  "\377\334\344\342\377\342\351\350\377\220\350\354\340\377\2\235\253\250" \
-  "\377\334\341\340\377\203\350\354\340\377\2\320\327\325\377\277\310\306" \
-  "\377\250\350\354\340\377\4\300\317\314\377\376\377\377\377\376\376\376" \
-  "\377\301\317\315\377\233\350\354\340\377\4\303\321\317\377\377\377\377" \
-  "\377\374\375\374\377\303\320\316\377\217\350\354\340\377\1\326\334\333" \
-  "\377\206Slg\377\1\277\310\306\377\247\350\354\340\377\5\344\352\351\377" \
-  "\332\343\341\377\377\377\377\377\347\354\353\377\330\341\337\377\233" \
-  "\350\354\340\377\4\312\327\324\377\364\366\366\377\377\377\377\377\315" \
-  "\331\326\377\217\350\354\340\377\2\326\334\333\377\265\300\275\377\204" \
-  "\350\354\340\377\2\312\322\321\377\277\310\306\377\247\350\354\340\377" \
-  "\4\302\320\316\377\374\375\375\377\377\377\377\377\303\322\317\377\235" \
-  "\350\354\340\377\4\314\330\325\377\377\377\377\377\364\367\366\377\312" \
-  "\326\324\377\275\350\354\340\377\4\315\330\325\377\377\377\377\377\364" \
-  "\366\366\377\312\327\324\377\235\350\354\340\377\4\303\321\316\377\374" \
-  "\374\374\377\377\377\377\377\303\321\316\377\224\350\354\340\377\1\257" \
-  "\272\270\377\247\350\354\340\377\4\314\330\325\377\363\366\365\377\377" \
-  "\377\377\377\313\327\325\377\236\350\354\340\377\5\343\352\350\377\314" \
-  "\330\326\377\332\342\341\377\331\342\340\377\331\341\340\377\221\350" \
-  "\354\340\377\3\331\337\336\377\230\247\244\377_vr\377\247\350\354\340" \
-  "\377\5\303\321\316\377\377\377\377\377\373\374\374\377\272\312\307\377" \
-  "\334\344\342\377\235\350\354\340\377\5\347\355\354\377\332\342\340\377" \
-  "\370\372\371\377\321\334\332\377\266\307\304\377\217\350\354\340\377" \
-  "\5\262\275\273\377s\207\203\377Uni\377s\207\203\377x\214\210\377\246" \
-  "\350\354\340\377\5\342\351\347\377\336\346\344\377\344\352\351\377\251" \
-  "\275\271\377\274\313\310\377\236\350\354\340\377\5\325\337\335\377\375" \
-  "\376\376\377\377\377\377\377\364\367\366\377\256\300\275\377\211\350" \
-  "\354\340\377\13\210\231\225\377\203\225\221\377\340\344\344\377\315\324" \
-  "\323\377\213\234\230\377Xql\377`wr\377\233\251\246\377\333\340\337\377" \
-  "\350\354\340\377\322\330\327\377\246\350\354\340\377\4\342\351\347\377" \
-  "\341\350\347\377\376\376\376\377\274\313\311\377\237\350\354\340\377" \
-  "\5\346\354\353\377\340\347\346\377\373\374\374\377\324\336\334\377\306" \
-  "\323\320\377\210\350\354\340\377\7\233\251\246\377\325\333\331\377\343" \
-  "\347\346\377Vni\377Wok\377\201\223\220\377|\217\213\377\253\350\354\340" \
-  "\377\4\346\354\353\377\335\345\343\377\355\361\360\377\321\334\332\377" \
-  "\241\350\354\340\377\3\272\312\307\377\350\355\354\377\317\331\327\377" \
-  "\210\350\354\340\377\7\253\270\265\377\255\271\266\377\270\302\300\377" \
-  "q\205\201\377u\211\205\377\272\304\302\377\225\245\242\377\253\350\354" \
-  "\340\377\3\352\356\352\377\330\341\337\377\306\323\321\377\243\350\354" \
-  "\340\377\2\321\333\331\377\314\327\326\377\211\350\354\340\377\2\267" \
-  "\301\277\377\260\274\271\377\202\350\354\340\377\4\275\307\305\377{\217" \
-  "\213\377\222\242\236\377\325\333\331\377\252\350\354\340\377\2\213\241" \
-  "\234\377\307\324\321\377\243\350\354\340\377\2\270\307\304\377\227\253" \
-  "\246\377\217\350\354\340\377\5\344\350\347\377\243\261\256\377\200\222" \
-  "\216\377\255\271\267\377\223\243\240\377\247\350\354\340\377\1\207\230" \
-  "\225\377\244\350\354\340\377\2\345\351\350\377\226\245\242\377\222\350" \
-  "\354\340\377\2\313\323\321\377w\213\207\377\247\350\354\340\377\1\347" \
-  "\352\352\377\271\350\354\340\377\1\323\332\330\377\225\350\354\340\377")
-
-
diff --git a/packages/kexecboot/files/angstrom/logo.png b/packages/kexecboot/files/angstrom/logo.png
deleted file mode 100644
index bd14069364..0000000000
--- a/packages/kexecboot/files/angstrom/logo.png
+++ /dev/null
diff --git a/packages/kexecboot/files/angstrom/qvga/logo_linux_clut224.ppm.bz2 b/packages/kexecboot/files/angstrom/qvga/logo_linux_clut224.ppm.bz2
deleted file mode 100644
index 08ae02aae3..0000000000
--- a/packages/kexecboot/files/angstrom/qvga/logo_linux_clut224.ppm.bz2
+++ /dev/null
diff --git a/packages/kexecboot/files/angstrom/vga/logo_linux_clut224.ppm.bz2 b/packages/kexecboot/files/angstrom/vga/logo_linux_clut224.ppm.bz2
deleted file mode 100644
index 3b409b0ce1..0000000000
--- a/packages/kexecboot/files/angstrom/vga/logo_linux_clut224.ppm.bz2
+++ /dev/null
diff --git a/packages/kexecboot/files/logo-img.h b/packages/kexecboot/files/logo-img.h
deleted file mode 100644
index 22a6e76307..0000000000
--- a/packages/kexecboot/files/logo-img.h
+++ /dev/null
@@ -1,271 +0,0 @@
-/* GdkPixbuf RGBA C-Source image dump 1-byte-run-length-encoded */
-
-#define LOGO_IMG_ROWSTRIDE (392)
-#define LOGO_IMG_WIDTH (98)
-#define LOGO_IMG_HEIGHT (64)
-#define LOGO_IMG_BYTES_PER_PIXEL (4) /* 3:RGB, 4:RGBA */
-#define LOGO_IMG_RLE_PIXEL_DATA ((uint8*) \
-  "\377\350\354\340\377\377\350\354\340\377\377\350\354\340\377\377\350\354" \
-  "\340\377\374\350\354\340\377\12\331\337\337\377\301\310\313\377\255\267" \
-  "\273\377\237\253\261\377\231\246\255\377\231\245\254\377\237\253\260" \
-  "\377\253\266\272\377\300\307\312\377\330\335\336\377\324\350\354\340" \
-  "\377\5\346\352\351\377\264\276\301\377\204\222\233\377gx\202\377_q{\377" \
-  "\210]oz\377\5^p{\377gx\202\377\202\220\230\377\261\273\277\377\344\350" \
-  "\347\377\316\350\354\340\377\3\321\327\331\377\213\231\240\377ct\177" \
-  "\377\220]oz\377\3bt~\377\207\225\236\377\315\324\325\377\312\350\354" \
-  "\340\377\3\332\337\340\377\205\223\234\377_q|\377\224]oz\377\3_q{\377" \
-  "\201\220\230\377\326\333\334\377\307\350\354\340\377\2\243\255\263\377" \
-  "as~\377\230]oz\377\2ar}\377\234\250\256\377\304\350\354\340\377\2\343" \
-  "\347\346\377z\212\223\377\234]oz\377\2v\206\217\377\336\343\343\377\301" \
-  "\350\354\340\377\2\321\330\332\377iz\204\377\214]oz\377\2_q}\377k{\206" \
-  "\377\202q\201\213\377\2k|\206\377`r}\377\214]oz\377\2fx\202\377\314\322" \
-  "\325\377\277\350\354\340\377\2\315\323\326\377du\200\377\211]oz\377\5" \
-  "`r}\377\203\222\231\377\256\270\274\377\325\332\333\377\351\355\345\377" \
-  "\204\350\354\340\377\5\351\355\345\377\327\333\334\377\260\272\276\377" \
-  "\206\224\233\377bs~\377\211]oz\377\2bs~\377\306\315\317\377\275\350\354" \
-  "\340\377\2\323\331\333\377du\200\377\210]oz\377\3hy\203\377\243\256\264" \
-  "\377\344\350\350\377\214\350\354\340\377\3\347\352\351\377\250\262\266" \
-  "\377iz\204\377\210]oz\377\2bs~\377\315\324\326\377\273\350\354\340\377" \
-  "\2\346\351\351\377iz\204\377\207]oz\377\3_q|\377\230\244\253\377\351" \
-  "\355\346\377\220\350\354\340\377\3\350\354\342\377\234\250\257\377`r" \
-  "}\377\207]oz\377\2fw\202\377\340\344\344\377\272\350\354\340\377\1{\213" \
-  "\224\377\207]oz\377\2j{\205\377\312\320\322\377\205\350\354\340\377\12" \
-  "\322\363\370\377\221\342\362\377f\324\355\377B\313\352\3771\306\350\377" \
-  "-\306\350\377A\312\351\377d\323\355\377\216\341\362\377\316\362\367\377" \
-  "\205\350\354\340\377\2\320\326\330\377m~\210\377\207]oz\377\1v\206\217" \
-  "\377\271\350\354\340\377\1\250\262\270\377\207]oz\377\2t\203\215\377" \
-  "\343\347\347\377\204\350\354\340\377\3\247\350\365\377E\312\351\377\32" \
-  "\276\345\377\210\25\274\344\377\3\31\276\344\377@\311\351\377\237\346" \
-  "\364\377\204\350\354\340\377\2\350\353\352\377y\207\220\377\207]oz\377" \
-  "\1\237\252\260\377\267\350\354\340\377\2\341\345\345\377ar}\377\206]" \
-  "oz\377\2r\203\214\377\351\354\350\377\203\350\354\340\377\3\314\361\370" \
-  "\377C\313\352\377\24\274\344\377\214\25\274\344\377\3\24\274\344\377" \
-  "@\312\351\377\302\360\367\377\204\350\354\340\377\1x\207\220\377\206" \
-  "]oz\377\2_q|\377\332\337\337\377\266\350\354\340\377\1\213\230\240\377" \
-  "\206]oz\377\2hy\203\377\342\347\347\377\203\350\354\340\377\2\235\344" \
-  "\363\377\34\277\345\377\220\25\274\344\377\2\31\277\345\377\222\341\362" \
-  "\377\203\350\354\340\377\2\350\354\350\377l}\206\377\206]oz\377\1\203" \
-  "\221\232\377\265\350\354\340\377\2\332\337\340\377^p{\377\205]oz\377" \
-  "\2^p{\377\307\316\321\377\203\350\354\340\377\2\214\337\361\377\27\275" \
-  "\344\377\222\25\274\344\377\2\26\275\344\377~\334\360\377\203\350\354" \
-  "\340\377\2\320\326\327\377_q|\377\206]oz\377\1\322\330\332\377\264\350" \
-  "\354\340\377\1\224\241\247\377\206]oz\377\1\222\237\246\377\203\350\354" \
-  "\340\377\2\237\345\363\377\27\275\344\377\224\25\274\344\377\2\26\275" \
-  "\344\377\224\342\362\377\203\350\354\340\377\1\234\247\256\377\206]o" \
-  "z\377\1\213\230\240\377\264\350\354\340\377\1bs~\377\205]oz\377\2ct\177" \
-  "\377\351\355\350\377\202\350\354\340\377\2\321\363\370\377\31\277\346" \
-  "\377\210\25\274\344\377\6\34\277\345\377;\310\351\377Q\317\354\377T\320" \
-  "\353\377@\311\351\377\36\277\345\377\210\25\274\344\377\2\30\276\345" \
-  "\377\310\361\370\377\203\350\354\340\377\1fw\202\377\205]oz\377\2_q|" \
-  "\377\351\354\350\377\262\350\354\340\377\1\276\306\312\377\206]oz\377" \
-  "\1\235\251\257\377\203\350\354\340\377\1D\314\352\377\207\25\274\344" \
-  "\377\3#\301\346\377\210\337\361\377\337\367\371\377\204\350\354\340\377" \
-  "\2\270\354\366\377\27\275\344\377\207\25\274\344\377\2%\301\346\377\316" \
-  "\362\370\377\203\350\354\340\377\1\247\261\266\377\206]oz\377\1\265\276" \
-  "\302\377\262\350\354\340\377\1\217\234\243\377\206]oz\377\1\341\345\345" \
-  "\377\202\350\354\340\377\2\257\352\365\377\24\274\344\377\206\25\274" \
-  "\344\377\2F\314\353\377\340\367\371\377\205\350\354\340\377\2\326\364" \
-  "\371\377.\304\347\377\207\25\274\344\377\2%\301\346\377\310\361\370\377" \
-  "\204\350\354\340\377\2\350\354\351\377^q|\377\205]oz\377\1\206\224\234" \
-  "\377\262\350\354\340\377\1hy\204\377\205]oz\377\1{\211\222\377\203\350" \
-  "\354\340\377\1G\314\353\377\206\25\274\344\377\1H\314\352\377\206\350" \
-  "\354\340\377\2\326\364\371\377.\304\347\377\207\25\274\344\377\2$\301" \
-  "\346\377\310\360\370\377\206\350\354\340\377\1\202\221\232\377\205]o" \
-  "z\377\1bt\177\377\261\350\354\340\377\1\347\352\352\377\206]oz\377\1" \
-  "\247\261\266\377\202\350\354\340\377\2\335\367\372\377\26\275\344\377" \
-  "\205\25\274\344\377\2#\301\346\377\341\370\372\377\205\350\354\340\377" \
-  "\2\327\365\371\377/\304\347\377\207\25\274\344\377\2$\301\346\377\307" \
-  "\360\367\377\203\350\354\340\377\2\250\351\365\377\317\363\371\377\202" \
-  "\350\354\340\377\1\260\271\276\377\206]oz\377\1\335\342\342\377\260\350" \
-  "\354\340\377\1\313\322\324\377\206]oz\377\1\314\323\325\377\202\350\354" \
-  "\340\377\1\234\345\363\377\206\25\274\344\377\1\212\336\361\377\205\350" \
-  "\354\340\377\2\327\365\371\377/\304\347\377\207\25\274\344\377\2$\301" \
-  "\346\377\307\360\367\377\203\350\354\340\377\3\251\351\365\377\30\276" \
-  "\345\377\217\340\362\377\202\350\354\340\377\1\326\333\335\377\206]o" \
-  "z\377\1\303\312\315\377\260\350\354\340\377\1\271\301\304\377\206]oz" \
-  "\377\1\347\352\352\377\202\350\354\340\377\1l\327\356\377\205\25\274" \
-  "\344\377\2\26\275\344\377\343\370\372\377\204\350\354\340\377\2\333\365" \
-  "\370\377/\304\350\377\207\25\274\344\377\2$\301\346\377\306\360\367\377" \
-  "\203\350\354\340\377\4\252\351\365\377\31\277\345\377\25\274\344\377" \
-  "]\322\354\377\203\350\354\340\377\206]oz\377\1\260\270\275\377\260\350" \
-  "\354\340\377\1\254\265\272\377\206]oz\377\203\350\354\340\377\1N\316" \
-  "\353\377\205\25\274\344\377\1""5\307\350\377\205\350\354\340\377\1B\312" \
-  "\352\377\207\25\274\344\377\2#\301\346\377\306\360\367\377\203\350\354" \
-  "\340\377\2\252\351\365\377\31\277\345\377\202\25\274\344\377\1@\312\352" \
-  "\377\203\350\354\340\377\1at\177\377\205]oz\377\1\241\255\262\377\260" \
-  "\350\354\340\377\1\245\257\264\377\205]oz\377\1`r}\377\203\350\354\340" \
-  "\377\1\77\311\351\377\205\25\274\344\377\1T\317\354\377\204\350\354\340" \
-  "\377\2\332\366\371\377\24\274\344\377\206\25\274\344\377\2#\301\346\377" \
-  "\305\360\367\377\203\350\354\340\377\2\253\351\365\377\31\277\345\377" \
-  "\203\25\274\344\377\1-\305\350\377\203\350\354\340\377\1j{\205\377\205" \
-  "]oz\377\1\232\247\255\377\260\350\354\340\377\1\246\260\265\377\205]" \
-  "oz\377\1as~\377\203\350\354\340\377\1>\311\351\377\205\25\274\344\377" \
-  "\1U\317\354\377\204\350\354\340\377\1\330\365\371\377\206\25\274\344" \
-  "\377\2#\301\346\377\304\357\367\377\203\350\354\340\377\2\260\353\365" \
-  "\377\31\277\345\377\204\25\274\344\377\1-\304\350\377\203\350\354\340" \
-  "\377\1j{\205\377\205]oz\377\1\233\247\255\377\260\350\354\340\377\1\254" \
-  "\265\272\377\206]oz\377\203\350\354\340\377\1N\315\353\377\205\25\274" \
-  "\344\377\1""9\307\351\377\205\350\354\340\377\1<\310\351\377\204\25\274" \
-  "\344\377\2\"\301\346\377\304\357\367\377\204\350\354\340\377\1G\313\352" \
-  "\377\205\25\274\344\377\1\77\311\351\377\203\350\354\340\377\1bt\177" \
-  "\377\205]oz\377\1\241\255\261\377\260\350\354\340\377\1\271\301\305\377" \
-  "\206]oz\377\1\350\353\352\377\202\350\354\340\377\1i\326\355\377\205" \
-  "\25\274\344\377\2\24\275\344\377\350\371\371\377\204\350\354\340\377" \
-  "\2\323\363\371\377:\310\351\377\202\24\274\344\377\2""3\306\350\377\306" \
-  "\360\367\377\205\350\354\340\377\1\33\276\345\377\205\25\274\344\377" \
-  "\1[\322\355\377\203\350\354\340\377\206]oz\377\1\260\271\275\377\260" \
-  "\350\354\340\377\1\312\322\324\377\206]oz\377\1\316\325\327\377\202\350" \
-  "\354\340\377\1\234\344\363\377\206\25\274\344\377\1\221\341\362\377\206" \
-  "\350\354\340\377\2\306\360\370\377\306\357\367\377\206\350\354\340\377" \
-  "\1\234\345\364\377\206\25\274\344\377\1\213\340\362\377\202\350\354\340" \
-  "\377\1\327\335\336\377\206]oz\377\1\302\311\314\377\260\350\354\340\377" \
-  "\1\346\351\351\377\206]oz\377\1\251\263\270\377\202\350\354\340\377\2" \
-  "\332\365\371\377\26\274\344\377\205\25\274\344\377\2&\302\347\377\347" \
-  "\371\373\377\215\350\354\340\377\1-\304\347\377\205\25\274\344\377\2" \
-  "\24\274\344\377\313\362\370\377\202\350\354\340\377\1\263\274\300\377" \
-  "\206]oz\377\1\334\341\341\377\261\350\354\340\377\1gx\202\377\205]oz" \
-  "\377\1}\214\225\377\203\350\354\340\377\1C\312\352\377\206\25\274\344" \
-  "\377\1S\320\354\377\214\350\354\340\377\1b\323\355\377\206\25\274\344" \
-  "\377\1""4\307\350\377\203\350\354\340\377\1\207\224\234\377\205]oz\377" \
-  "\1bs~\377\262\350\354\340\377\1\214\232\241\377\205]oz\377\2^p{\377\344" \
-  "\350\350\377\202\350\354\340\377\1\251\350\364\377\207\25\274\344\377" \
-  "\2W\321\354\377\350\370\370\377\210\350\354\340\377\2\351\362\352\377" \
-  "c\324\354\377\207\25\274\344\377\1\226\343\364\377\202\350\354\340\377" \
-  "\2\351\355\346\377_q|\377\205]oz\377\1\203\221\231\377\262\350\354\340" \
-  "\377\1\274\305\310\377\206]oz\377\1\242\255\263\377\203\350\354\340\377" \
-  "\1>\311\351\377\207\25\274\344\377\3-\304\350\377\236\344\363\377\347" \
-  "\371\373\377\204\350\354\340\377\3\351\365\361\377\242\346\364\3772\306" \
-  "\350\377\207\25\274\344\377\1""5\306\347\377\203\350\354\340\377\1\254" \
-  "\266\273\377\206]oz\377\1\263\274\300\377\263\350\354\340\377\1ar}\377" \
-  "\205]oz\377\2dv\201\377\350\354\342\377\202\350\354\340\377\2\311\360" \
-  "\370\377\31\276\345\377\210\25\274\344\377\6$\301\347\377I\314\353\377" \
-  "h\325\356\377j\325\355\377I\315\353\377'\302\346\377\210\25\274\344\377" \
-  "\2\30\275\345\377\271\355\366\377\203\350\354\340\377\1iz\204\377\205" \
-  "]oz\377\2_p{\377\350\353\352\377\263\350\354\340\377\1\220\235\244\377" \
-  "\206]oz\377\1\230\245\254\377\203\350\354\340\377\2\223\342\363\377\26" \
-  "\274\344\377\224\25\274\344\377\2\24\274\344\377\201\335\361\377\203" \
-  "\350\354\340\377\1\242\255\263\377\206]oz\377\1\207\225\235\377\264\350" \
-  "\354\340\377\2\327\334\336\377^p{\377\205]oz\377\2_q|\377\317\325\327" \
-  "\377\203\350\354\340\377\2z\334\360\377\26\275\344\377\222\25\274\344" \
-  "\377\2\24\274\344\377l\330\357\377\203\350\354\340\377\2\326\333\334" \
-  "\377ar}\377\206]oz\377\1\317\324\327\377\265\350\354\340\377\1\206\224" \
-  "\234\377\206]oz\377\2l|\206\377\350\354\350\377\203\350\354\340\377\2" \
-  "\217\340\361\377\33\276\345\377\220\25\274\344\377\2\32\276\345\377\201" \
-  "\335\361\377\203\350\354\340\377\2\350\354\342\377q\201\212\377\206]" \
-  "oz\377\1\177\215\226\377\266\350\354\340\377\1\335\341\342\377\207\204" \
-  "\223\232\377\1\237\253\260\377\204\350\354\340\377\3\274\356\367\377" \
-  "9\310\351\377\24\274\344\377\215\25\274\344\377\2""3\306\350\377\270" \
-  "\353\366\377\204\350\354\340\377\1\246\261\266\377\207\204\223\232\377" \
-  "\1\326\333\334\377\305\350\354\340\377\3\231\343\363\3776\307\351\377" \
-  "\27\275\344\377\210\25\274\344\377\3\26\275\344\3775\306\350\377\224" \
-  "\341\362\377\326\350\354\340\377\4\305\357\367\377\206\336\360\377S\317" \
-  "\353\3772\306\350\377\202.\303\347\377\4""2\306\350\377Q\317\353\377" \
-  "\177\335\361\377\300\357\366\377\377\350\354\340\377\317\350\354\340" \
-  "\377\1\350\366\365\377\205\350\354\340\377\1\351\361\352\377\211\350" \
-  "\354\340\377\1\351\363\356\377\303\350\354\340\377\2i\327\356\377d\323" \
-  "\355\377\214\350\354\340\377\2""4\306\350\377\234\343\363\377\203\350" \
-  "\354\340\377\2\205\336\361\377I\314\352\377\211\350\354\340\377\2F\313" \
-  "\352\377\213\337\361\377\302\350\354\340\377\2\\\324\355\377X\320\354" \
-  "\377\214\350\354\340\377\2&\303\347\377\217\337\361\377\203\350\354\340" \
-  "\377\2u\332\360\377;\310\351\377\211\350\354\340\377\2;\310\351\377\177" \
-  "\333\360\377\241\350\354\340\377\11\306\315\320\377\210\226\235\377\230" \
-  "\243\252\377\351\355\346\377\350\354\340\377\211\226\235\377\201\217" \
-  "\227\377\203\221\231\377\263\274\300\377\202\350\354\340\377\20\254\266" \
-  "\272\377\205\223\233\377\254\266\272\377\350\354\340\377\332\337\340" \
-  "\377\202\220\230\377\201\217\227\377\207\225\234\377\320\326\330\377" \
-  "\350\354\340\377\337\367\372\377g\325\355\377J\316\353\377\251\350\365" \
-  "\377\350\354\340\377\216\342\363\377\203I\313\351\377#D\314\352\377\214" \
-  "\340\362\377\350\354\340\377\\\324\355\377$\300\346\377I\313\351\377" \
-  "Z\322\354\377\330\365\371\377\350\354\340\377\263\352\365\377N\317\353" \
-  "\377^\323\355\377\330\365\371\377\350\354\340\377\301\356\367\377Q\316" \
-  "\353\377I\313\351\377\31\275\345\377\217\337\361\377\351\363\355\377" \
-  "e\325\355\377F\313\351\377*\303\347\377;\310\351\377\350\354\340\377" \
-  "\276\355\366\377R\320\353\377Z\322\354\377\317\363\371\377\350\354\340" \
-  "\377\305\361\370\377R\320\353\377I\313\351\377\35\277\345\377\177\333" \
-  "\360\377\240\350\354\340\3775\333\337\340\377_q|\377\214\231\241\377" \
-  "r\202\213\377\200\217\227\377\351\355\346\377]oz\377\214\232\242\377" \
-  "\226\243\252\377^p{\377\323\331\332\377\256\270\274\377cu\177\377\225" \
-  "\241\247\377cu\177\377\256\270\274\377\274\304\307\377_q|\377\234\250" \
-  "\257\377\205\223\232\377fw\202\377\350\354\340\377D\312\351\377/\305" \
-  "\350\377V\320\353\377\26\275\344\377\306\360\370\377^\321\354\3774\305" \
-  "\347\377R\316\353\377\25\274\344\377c\323\355\377\23\274\344\377\275" \
-  "\355\366\377\\\324\355\377/\304\347\377q\327\356\3771\306\350\377P\316" \
-  "\353\377\323\364\371\377\31\276\345\377N\316\353\3776\306\350\3773\307" \
-  "\351\377\350\354\340\377%\303\347\377F\313\352\377q\327\356\377\34\276" \
-  "\345\377\217\337\361\377t\331\357\377'\302\346\377q\326\356\377\202;" \
-  "\310\351\377\13\341\367\372\377\36\277\345\377I\315\352\377:\310\351" \
-  "\377)\304\350\377\350\354\340\3772\307\350\377@\311\351\377q\327\356" \
-  "\377#\301\346\377\177\333\360\377\240\350\354\340\377B\265\275\301\377" \
-  "hy\203\377\375\376\373\377\305\314\316\377]oz\377\346\352\352\377]oz" \
-  "\377\325\332\332\377\376\377\374\377bt\177\377\277\307\312\377\206\223" \
-  "\233\377}\215\225\377\276\306\311\377}\214\225\377\206\223\234\377\274" \
-  "\304\307\377bu\200\377\350\354\340\377\324\332\332\377]oz\377\343\354" \
-  "\355\377\25\274\344\377g\326\356\377\233\344\363\377\24\276\345\377\222" \
-  "\340\362\377^\321\354\377c\322\354\377\260\351\364\377\25\274\344\377" \
-  "\350\354\340\377\27\276\345\377\241\345\364\377\\\324\355\377X\320\354" \
-  "\377\376\377\374\377\203\335\360\3772\305\350\377\241\345\363\377\23" \
-  "\275\345\377\230\343\362\377k\330\356\377\25\274\344\377\325\365\373" \
-  "\377\25\274\344\377\251\352\365\377\376\377\374\377&\303\347\377\217" \
-  "\337\361\377^\321\354\377b\322\354\377\376\377\374\377u\332\360\377;" \
-  "\310\351\377\262\351\364\377\25\274\344\377\220\341\362\377q\333\360" \
-  "\377\25\274\344\377\325\364\370\377\16\276\345\377\245\346\364\377\376" \
-  "\377\374\377;\310\351\377\177\333\360\377\240\350\354\340\377\15\263" \
-  "\273\277\377l}\206\377\376\377\374\377\313\322\323\377]oz\377\345\351" \
-  "\351\377]oz\377\325\332\332\377\376\377\374\377bu\200\377\277\307\312" \
-  "\377\203\221\231\377bt~\377\202j{\205\377\11\215\232\241\377\274\304" \
-  "\307\377bu\200\377\350\354\340\377\325\332\332\377]oz\377\341\353\355" \
-  "\377\25\274\344\377\40\300\345\377\202'\301\346\377\17\227\342\362\377" \
-  "^\321\354\377c\322\354\377\260\351\364\377\25\274\344\377\350\354\340" \
-  "\377\32\277\345\377\240\345\364\377\\\324\355\377X\320\354\377\376\377" \
-  "\374\377\203\335\357\3772\305\350\377\234\343\362\377\24\274\344\377" \
-  "\203'\301\346\377\15\321\364\372\377\25\274\344\377\251\352\365\377\376" \
-  "\377\374\377&\303\347\377\217\337\361\377^\321\354\377c\322\354\377\376" \
-  "\377\374\377u\332\360\377;\310\351\377\260\351\364\377\25\274\344\377" \
-  "\203'\301\346\377\6\324\364\370\377\16\276\345\377\246\346\364\377\376" \
-  "\377\374\377;\310\351\377\177\333\360\377\240\350\354\340\377B\275\305" \
-  "\310\377bt\177\377\343\347\347\377\251\264\271\377du\177\377\350\354" \
-  "\351\377]oz\377\313\322\323\377\355\360\357\377`r}\377\301\311\314\377" \
-  "\206\224\234\377\215\233\242\377\352\355\355\377\352\355\354\377\362" \
-  "\365\363\377\274\304\307\377bu\200\377\350\354\340\377\325\332\332\377" \
-  "]oz\377\343\354\355\377\26\274\344\377\216\341\362\377\336\366\372\377" \
-  "\336\367\372\377\365\374\374\377^\321\354\377c\322\354\377\260\351\364" \
-  "\377\25\274\344\377\350\354\340\377\32\277\345\377\240\345\364\377\\" \
-  "\324\355\377R\316\353\377\352\372\372\377n\330\357\3777\306\350\377\240" \
-  "\345\363\377\17\276\345\377\330\365\371\377\336\366\372\377\342\367\372" \
-  "\377\350\354\340\377\26\274\344\377\226\343\363\377\352\372\372\377$" \
-  "\302\347\377\217\337\361\377^\322\355\377Q\316\353\377\352\372\372\377" \
-  "l\330\357\377;\310\351\377\260\352\365\377\25\274\344\377\317\362\370" \
-  "\377\336\366\372\377\341\367\372\377\373\376\374\377\24\277\345\377\216" \
-  "\340\362\377\352\372\372\3776\307\351\377\177\333\360\377\241\350\354" \
-  "\340\377Ax\207\220\377_q|\377`r}\377\256\270\275\377\351\355\346\377" \
-  "]oz\377ct\177\377bt~\377k{\205\377\351\355\346\377\273\303\307\377`r" \
-  "}\377dv\200\377ev\200\377\231\245\253\377\277\307\312\377ew\202\377\350" \
-  "\354\340\377\330\335\335\377^p{\377\350\354\342\377X\321\354\377\24\275" \
-  "\345\377\32\277\345\377\33\277\346\377\247\347\364\377^\322\355\377c" \
-  "\323\355\377\261\352\365\377\27\275\344\377\350\354\340\377\35\300\345" \
-  "\377\245\346\364\377_\325\356\377\27\275\344\377\32\277\345\377\24\275" \
-  "\345\377\201\335\361\377\333\367\372\377$\301\346\377\31\276\345\377" \
-  "\32\277\345\377%\302\346\377\350\354\340\377W\321\354\377\24\275\345" \
-  "\377\32\277\345\377\23\274\344\377\222\341\362\377\247\347\364\377\27" \
-  "\276\345\377\32\277\345\377\25\275\345\377\77\311\351\377\350\370\370" \
-  "\377,\303\347\377\30\276\345\377\32\277\345\377\40\301\346\377\344\370" \
-  "\372\377e\325\356\377\27\275\344\377\32\277\345\377\23\275\344\377\202" \
-  "\335\360\377\242\350\354\340\377\10\316\325\327\377\334\341\342\377\350" \
-  "\354\340\377\351\355\346\377]oz\377\255\267\273\377\312\321\323\377\351" \
-  "\355\346\377\202\350\354\340\377\1\332\337\337\377\202\311\320\322\377" \
-  "\3\341\346\346\377\350\354\340\377\327\335\336\377\202\350\354\340\377" \
-  "\1\322\330\332\377\202\350\354\340\377\1\267\354\367\377\202\260\351" \
-  "\365\377\11\347\372\373\377\330\365\371\377\332\365\371\377\350\354\340" \
-  "\377\277\356\367\377\350\354\340\377\305\357\367\377\350\356\343\377" \
-  "\333\365\371\377\202\260\351\365\377\1\300\357\367\377\202\350\354\340" \
-  "\377\4\337\367\372\377\261\351\365\377\260\351\365\377\271\354\366\377" \
-  "\202\350\354\340\377\1\267\354\367\377\202\260\351\365\377\3\351\365" \
-  "\361\377\350\354\340\377\311\361\370\377\202\260\351\365\377\6\314\362" \
-  "\370\377\350\354\340\377\345\370\372\377\263\351\365\377\260\351\365" \
-  "\377\264\353\366\377\202\350\354\340\377\1\274\354\366\377\202\260\351" \
-  "\365\377\1\343\370\372\377\245\350\354\340\377\3\351\354\345\377]oz\377" \
-  "\325\333\333\377\340\350\354\340\377\2\227\243\252\377\350\354\342\377" \
-  "\377\350\354\340\377\377\350\354\340\377\377\350\354\340\377\377\350" \
-  "\354\340\377\270\350\354\340\377")
-
-
diff --git a/packages/kexecboot/files/logo.png b/packages/kexecboot/files/logo.png
deleted file mode 100644
index d3bf8fb886..0000000000
--- a/packages/kexecboot/files/logo.png
+++ /dev/null
diff --git a/packages/kexecboot/files/qvga/logo_linux_clut224.ppm.bz2 b/packages/kexecboot/files/qvga/logo_linux_clut224.ppm.bz2
deleted file mode 100644
index ddc39a3c64..0000000000
--- a/packages/kexecboot/files/qvga/logo_linux_clut224.ppm.bz2
+++ /dev/null
diff --git a/packages/kexecboot/files/vga/logo_linux_clut224.ppm.bz2 b/packages/kexecboot/files/vga/logo_linux_clut224.ppm.bz2
deleted file mode 100644
index c3aeaac183..0000000000
--- a/packages/kexecboot/files/vga/logo_linux_clut224.ppm.bz2
+++ /dev/null
diff --git a/packages/kexecboot/initramfs-kexecboot-image.bb b/packages/kexecboot/initramfs-kexecboot-image.bb
deleted file mode 100644
index 7fc2b79d04..0000000000
--- a/packages/kexecboot/initramfs-kexecboot-image.bb
+++ /dev/null
@@ -1,21 +0,0 @@
-#initramfs image which mounts the rootfilesystem and kexecs a kernel from there
-
-ONLINE_PACKAGE_MANAGEMENT = "none"
-IMAGE_FSTYPES += " cpio.gz"
-inherit image
-
-# These devices need mmcblk* to be 254 instead of 179
-IMAGE_DEVICE_TABLES_hx4700 = "device_table-oldmmc.txt"
-IMAGE_DEVICE_TABLES_h2200 = "device_table-oldmmc.txt"
-
-export IMAGE_BASENAME = "initramfs-kexecboot-image"
-
-EXTRA_IMAGEDEPENDS = ""
-IMAGE_INSTALL = "kexecboot"
-IMAGE_LINGUAS = ""
-
-IMAGE_LOGIN_MANAGER = ""
-IMAGE_INIT_MANAGER = ""
-IMAGE_INITSCRIPTS = ""
-IMAGE_DEV_MANAGER = ""
-#ONLINE_PACKAGE_MANAGEMENT = "none"
diff --git a/packages/kexecboot/kexecboot-0.4/add-reboot-option.patch b/packages/kexecboot/kexecboot-0.4/add-reboot-option.patch
deleted file mode 100644
index 52619229fd..0000000000
--- a/packages/kexecboot/kexecboot-0.4/add-reboot-option.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/kexecboot.c
-+++ b/kexecboot.c
-@@ -536,11 +536,23 @@ int main(int argc, char **argv)
-			fread(&evt, sizeof(struct input_event), 1, f);
-		while(evt.type != EV_KEY || evt.value != 0);
-
--		if(evt.code == KEY_UP && choice >0)
--			choice--;
--		if(evt.code == KEY_DOWN && choice < bl->size-1)
--			choice++;
--	//	printf("%d %d\n",choice, evt.code);
-+		switch (evt.code) {
-+		case KEY_UP:
-+			if (choice > 0) choice--;
-+			break;
-+		case KEY_DOWN:
-+			if ( choice < (bl->size - 1) ) choice++;
-+			break;
-+		case KEY_R:
-+			/* FIXME: Should work while no boot devices is found */
-+			sync();
-+			sleep(1);
-+			/* if ( -1 == reboot(LINUX_REBOOT_CMD_RESTART) ) { */
-+			if ( -1 == reboot(RB_AUTOBOOT) ) {
-+				perror("Can't initiate reboot");
-+			}
-+			break;
-+		}
-
-	}while(evt.code != 87 && evt.code != 63);
-	fclose(f);
---- a/kexecboot.h
-+++ b/kexecboot.h
-@@ -29,6 +29,7 @@
- #include <sys/wait.h>
- #include <ctype.h>
- #include <errno.h>
-+#include <sys/reboot.h>
- #include "fb.h"
- #include "devicescan.h"
- #include "res/logo-img.h"
diff --git a/packages/kexecboot/kexecboot-0.4/add-sleep.patch b/packages/kexecboot/kexecboot-0.4/add-sleep.patch
deleted file mode 100644
index 8f41b0ef10..0000000000
--- a/packages/kexecboot/kexecboot-0.4/add-sleep.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/kexecboot.c	2009-01-24 14:11:17.000000000 +0100
-+++ b/kexecboot.c	2009-01-24 14:15:03.000000000 +0100
-@@ -427,6 +427,9 @@
-
-		DPRINTF("I'm the init-process!\n");
-
-+		/* extra delay for initializing slow SD/CF */
-+		sleep(1);
-+
-		/* Mount procfs */
-		if ( -1 == mount("proc", "/proc", "proc",
-				0, NULL) ) {
diff --git a/packages/kexecboot/kexecboot-0.4/fb-render-16bit.patch b/packages/kexecboot/kexecboot-0.4/fb-render-16bit.patch
deleted file mode 100644
index f3405e49d8..0000000000
--- a/packages/kexecboot/kexecboot-0.4/fb-render-16bit.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-Index: kexecboot-0.4/fb.c
-===================================================================
---- kexecboot-0.4.orig/fb.c	2009-01-29 22:03:34.000000000 +0000
-+++ kexecboot-0.4/fb.c	2009-01-29 22:08:22.000000000 +0000
-@@ -19,7 +19,15 @@
- 
- void fb_render(FB * fb)
- {
--	memcpy(fb->data, fb->backbuffer, fb->screensize);
-+	uint16 *source, *dest;
-+	int n = fb->screensize/2;
-+
-+	source = (uint16 *)fb->backbuffer;
-+	dest = (uint16 *)fb->data;
-+
-+	while (n--) {
-+		*dest++ = *source++;
-+	}
- }
- 
- void fb_destroy(FB * fb)
diff --git a/packages/kexecboot/kexecboot-0.4/graphical-no-devices.patch b/packages/kexecboot/kexecboot-0.4/graphical-no-devices.patch
deleted file mode 100644
index b2cb214894..0000000000
--- a/packages/kexecboot/kexecboot-0.4/graphical-no-devices.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/kexecboot.c
-+++ b/kexecboot.c
-@@ -66,8 +66,15 @@ void display_menu(FB *fb, struct bootlist *bl, int current)
-		      LOGO_IMG_WIDTH,
-		      LOGO_IMG_HEIGHT,
-		      LOGO_IMG_BYTES_PER_PIXEL, LOGO_IMG_RLE_PIXEL_DATA);
--	fb_draw_text (fb, LOGO_IMG_WIDTH + margin, margin, 0, 0, 0, &radeon_font,
--			"Make your choice by selecting\nan item with the cursor keys\nand press OK to continue");
-+	/* If no devices found print a message */
-+	if (0 == bl->size) {
-+		fb_draw_text (fb, LOGO_IMG_WIDTH + margin, margin, 0, 0, 0, &radeon_font,
-+			"No bootable devices found.\nInsert bootable device\nand press 'R' to reboot.");
-+	} else {
-+		fb_draw_text (fb, LOGO_IMG_WIDTH + margin, margin, 0, 0, 0, &radeon_font,
-+			"Make your choice by selecting\nan item with the cursor keys\nand press OK to continue.\nPress 'R' to reboot.");
-+	}
-+
-	if(current < firstslot)
-		firstslot=current;
-	if(current > firstslot + slots -1)
diff --git a/packages/kexecboot/kexecboot-0.4/kexecboot-tosa.patch b/packages/kexecboot/kexecboot-0.4/kexecboot-tosa.patch
deleted file mode 100644
index e1f4870853..0000000000
--- a/packages/kexecboot/kexecboot-0.4/kexecboot-tosa.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-Index: kexecboot-0.4/kexecboot.c
-===================================================================
---- kexecboot-0.4.orig/kexecboot.c	2009-01-29 01:30:43.000000000 +0000
-+++ kexecboot-0.4/kexecboot.c	2009-01-29 01:39:17.000000000 +0000
-@@ -416,7 +416,7 @@
- 		{"Spitz",	270},
- 
- 		{"Collie",	270},
--		{"Tosa",	270},
-+		{"SHARP Tosa",	0},
- 		{"Poodle",	270},
- 		{NULL, 0}
- 	};
-@@ -566,7 +566,9 @@
- 			break;
- 		}
- 
--	}while(evt.code != 87 && evt.code != 63);
-+	}while(evt.code != 87 && evt.code != 63 &&
-+		evt.code != KEY_SPACE && evt.code != KEY_ENTER &&
-+		evt.code != KEY_HIRAGANA && evt.code != KEY_HENKAN);
- 	fclose(f);
- 	// reset terminal
- 	tcsetattr(fileno(stdin), TCSANOW, &old);
diff --git a/packages/kexecboot/kexecboot-0.4/scan_devices-top.patch b/packages/kexecboot/kexecboot-0.4/scan_devices-top.patch
deleted file mode 100644
index 6b21d03a3d..0000000000
--- a/packages/kexecboot/kexecboot-0.4/scan_devices-top.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/kexecboot.c
-+++ b/kexecboot.c
-@@ -508,28 +508,27 @@ int main(int argc, char **argv)
-	if ((fb = fb_new(angle)) == NULL)
-		exit(-1);
-
--	bl = scan_devices();
--
--	if(!bl->size){
--		puts("No bootable device found");
--		exit(-1);
--	}
--
-	f = fopen(eventif,"r");
-	if(!f){
-	    perror(eventif);
-	    exit(3);
-	}
-
--
-	// deactivate terminal input
--
-	tcgetattr(fileno(stdin), &old);
-	new = old;
-	new.c_lflag &= ~ECHO;
- //	new.c_cflag &=~CREAD;
-	tcsetattr(fileno(stdin), TCSANOW, &new);
-
-+	bl = scan_devices();
-+/*
-+	if(!bl->size){
-+		puts("No bootable device found");
-+		exit(-1);
-+	}
-+*/
-+
-	do{
-		display_menu(fb, bl, choice);
-		do
diff --git a/packages/kexecboot/kexecboot-0.4/silent-output-hack.patch b/packages/kexecboot/kexecboot-0.4/silent-output-hack.patch
deleted file mode 100644
index abe8e84dd1..0000000000
--- a/packages/kexecboot/kexecboot-0.4/silent-output-hack.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/devicescan.c	2009-01-17 00:51:35.000000000 +0100
-+++ b/devicescan.c	2009-01-24 22:13:45.000000000 +0100
-@@ -120,14 +120,14 @@
-		    malloc((strlen(split) + strlen("/dev/") +
-			    1) * sizeof(char));
-		sprintf(device, "/dev/%s", split);
--		printf("Probing %s\n",device);
-+		/* printf("Probing %s\n",device); */
-		int fd = open(device, O_RDONLY);
-		if (fd < 0) {
-			perror(device);
-			free(device);
-			continue;
-		}
--		printf("Device %s is opened\n", device);
-+		/* printf("Device %s is opened\n", device); */
-		if (-1 == identify_fs(fd, &fstype, NULL, 0)) {
-			free(device);
-			continue;
-@@ -137,33 +137,33 @@
-			free(device);
-			continue;
-		}
--		printf("FS on device %s is %s\n", device, fstype);
-+		/* printf("FS on device %s is %s\n", device, fstype); */
-		// no unknown filesystems
-		if (contains(fstype, fl) == -1) {
-			free(device);
-			continue;
-		}
--		printf("found %s (%s)\n",device, fstype);
-+		/* printf("found %s (%s)\n",device, fstype); */
-		// mount fs
-		if (mount(device, "/mnt", fstype, MS_RDONLY, NULL)) {
--			printf("mount failed\n");
-+			/* printf("mount failed\n"); */
-			perror(device);
-			free(device);
-			continue;
-		}
--		printf("mount successful\n");
-+		/* printf("mount successful\n"); */
-		if ( (g = fopen("/mnt/zImage", "r")) )
-			kernelpath = "/mnt/zImage";
-		else if ( (g = fopen("/mnt/boot/zImage", "r")) )
-			kernelpath = "/mnt/boot/zImage";
-		else {
--			printf("%s no kernel found, umounting\n", device);
-+			/* printf("%s no kernel found, umounting\n", device); */
-			free(device);
-			umount("/mnt");
-			continue;
-		}
-		fclose(g);
--		printf("found kernel\n");
-+		/* printf("found kernel\n"); */
-		bl->list[count] = malloc(sizeof(struct boot));
-		bl->list[count]->device = device;
-		bl->list[count]->fstype = fstype;
-@@ -174,7 +174,7 @@
-			fgets(bl->list[count]->cmdline, COMMAND_LINE_SIZE,
-			      g);
-			fclose(g);
--			printf("found command line\n");
-+			/* printf("found command line\n"); */
-			bl->list[count]->cmdline[strlen(bl->list[count]->cmdline)-1] = '\0';
-		} else
-			bl->list[count]->cmdline = NULL;
---- a/kexecboot.c	2009-01-25 10:41:04.000000000 +0100
-+++ b/kexecboot.c	2009-01-24 22:13:45.000000000 +0100
-@@ -558,7 +558,7 @@
-		case KEY_R:
-			/* FIXME: Should work while no boot devices is found */
-			sync();
--			sleep(1);
-+			/* REMOVE: we sleep on boot     sleep(1); */
-			/* if ( -1 == reboot(LINUX_REBOOT_CMD_RESTART) ) { */
-			if ( -1 == reboot(RB_AUTOBOOT) ) {
-				perror("Can't initiate reboot");
diff --git a/packages/kexecboot/kexecboot-0.4/switch-cursor-off.patch b/packages/kexecboot/kexecboot-0.4/switch-cursor-off.patch
deleted file mode 100644
index 632cc6a01c..0000000000
--- a/packages/kexecboot/kexecboot-0.4/switch-cursor-off.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/kexecboot.c
-+++ b/kexecboot.c
-@@ -512,6 +512,9 @@ int main(int argc, char **argv)
-	DPRINTF("FB angle is %d, input device is %s\n", angle, eventif);
-	DPRINTF("Going to fb mode\n");
-
-+	/* Switch cursor off. NOTE: works only when master-console is tty */
-+	printf("\033[?25l\n");
-+
-	if ((fb = fb_new(angle)) == NULL)
-		exit(-1);
diff --git a/packages/kexecboot/kexecboot-cfg_0.1.bb b/packages/kexecboot/kexecboot-cfg_0.1.bb
deleted file mode 100644
index d83f6529df..0000000000
--- a/packages/kexecboot/kexecboot-cfg_0.1.bb
+++ /dev/null
@@ -1,25 +0,0 @@
-LICENSE = "GPL"
-SECTION = "base"
-DESCRIPTION = "Configuration file for kexecboot"
-
-PR = "r2"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-CMDLINE_CON = "console=ttyS0,115200n8 console=tty1 noinitrd"
-CMDLINE_CON_collie = "console=ttySA0,115200n8 console=tty1 noinitrd"
-CMDLINE_CON_qemuarm = "console=ttyAMA0,115200n8 console=tty1 noinitrd"
-
-CMDLINE_DEBUG = '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug",d)}'
-
-CMDLINE_MEM_collie = "mem=64M"
-
-CMDLINE_ROTATE_spitz = "fbcon=rotate:1"
-CMDLINE_ROTATE_akita = "fbcon=rotate:1"
-CMDLINE_ROTATE_collie = "fbcon=rotate:1"
-CMDLINE_ROTATE_poodle = "fbcon=rotate:1"
-FILES_${PN} += "/boot/*"
-
-do_install () {
-	install -d ${D}/boot
-	echo "${CMDLINE_CON} ${CMDLINE_MEM} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG}"> ${D}/boot/kernel-cmdline
-}
diff --git a/packages/kexecboot/kexecboot.inc b/packages/kexecboot/kexecboot.inc
deleted file mode 100644
index 5f3f34948e..0000000000
--- a/packages/kexecboot/kexecboot.inc
+++ /dev/null
@@ -1,39 +0,0 @@
-LICENSE = "GPL"
-
-DEPENDS = "klibc"
-RDEPENDS = "kexec-static"
-
-inherit autotools
-
-# You can create your own *-img.h by doing
-# ./make-image-header.sh <file>.png HAND
-
-SRC_URI += "file://logo-img.h \
-	    file://logo.png \
-	    "
-
-export CC=${TARGET_PREFIX}klcc
-
-# standard oe cflags don't work with klcc
-export CFLAGS = ""
-export CPPFLAGS = ""
-export LDFLAGS = ""
-
-do_configure_prepend () {
-    install -m 0644 ${WORKDIR}/logo-img.h ${S}/res/
-    install -m 0644 ${WORKDIR}/logo.png ${S}/res/
-}
-
-do_install () {
-	install -d ${D}${bindir}
-	install -m 0755 kexecboot ${D}${bindir}/
-
-	install -d ${D}/proc
-	install -d ${D}/mnt
-}
-
-FILES_${PN} += " ${bindir}/kexecboot /init /proc /mnt"
-
-pkg_postinst_${PN} () {
-	ln -sf ${bindir}/kexecboot $D/init
-}
diff --git a/packages/kexecboot/kexecboot_0.4.bb b/packages/kexecboot/kexecboot_0.4.bb
deleted file mode 100644
index c38b2b402c..0000000000
--- a/packages/kexecboot/kexecboot_0.4.bb
+++ /dev/null
@@ -1,15 +0,0 @@
-PR = "r5"
-
-SRC_URI = "http://projects.linuxtogo.org/~jay7/kexecboot-${PV}.tar.gz \
-	file://add-reboot-option.patch;patch=1 \
-	file://scan_devices-top.patch;patch=1 \
-	file://graphical-no-devices.patch;patch=1 \
-	file://switch-cursor-off.patch;patch=1 \
-	file://add-sleep.patch;patch=1 \
-	file://silent-output-hack.patch;patch=1 \
-	file://kexecboot-tosa.patch;patch=1 \
-	file://fb-render-16bit.patch;patch=1"
-
-S = "${WORKDIR}/kexecboot-${PV}"
-
-require kexecboot.inc
diff --git a/packages/kexecboot/kexecboot_0.5.bb b/packages/kexecboot/kexecboot_0.5.bb
deleted file mode 100644
index b901903a2a..0000000000
--- a/packages/kexecboot/kexecboot_0.5.bb
+++ /dev/null
@@ -1,4 +0,0 @@
-SRC_URI = "http://projects.linuxtogo.org/frs/download.php/226/kexecboot-${PV}.tar.gz \
-          "
-
-require kexecboot.inc
diff --git a/packages/kexecboot/kexecboot_git.bb b/packages/kexecboot/kexecboot_git.bb
deleted file mode 100644
index 97a3f27512..0000000000
--- a/packages/kexecboot/kexecboot_git.bb
+++ /dev/null
@@ -1,15 +0,0 @@
-PR = "r0"
-DEFAULT_PREFERENCE = "-1"
-
-SRC_URI = "git://git.linuxtogo.org/home/thesing/kexecboot.git;protocol=git "
-SRCREV = "8823a939a38a8a3287f90dee062e8ab8569f884f"
-
-# v0.5
-#tag=8823a939a38a8a3287f90dee062e8ab8569f884f
-
-# v0.4
-#tag=d7af5356df4f25203831403c69f1a263c163f31a
-
-S = "${WORKDIR}/git"
-
-require kexecboot.inc
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/asus620/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/asus620/defconfig
deleted file mode 100644
index 8a8222abad..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/asus620/defconfig
+++ /dev/null
@@ -1,1354 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:36 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-CONFIG_MACH_A620=y
-CONFIG_A620_LCD=y
-CONFIG_A620_BUTTONS=y
-CONFIG_A620_PCMCIA=y
-CONFIG_A620_TS=y
-# CONFIG_A620_FLASHFAKE is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_SSP is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_RS232_SERIAL=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_ADC_BATTERY=y
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/asus730/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/asus730/defconfig
deleted file mode 100644
index 6e79c0a8c4..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/asus730/defconfig
+++ /dev/null
@@ -1,1475 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:37 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-CONFIG_MACH_A730=y
-# CONFIG_ASUS730_WM9712 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_SSP is not set
-# CONFIG_PXA27x_VOLTAGE is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IPAQ is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCA9535=y
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-# CONFIG_SND_RECON is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/aximx50/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/aximx50/defconfig
deleted file mode 100644
index 9252c73382..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/aximx50/defconfig
+++ /dev/null
@@ -1,1337 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:37 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-CONFIG_MACH_X50=y
-CONFIG_X50_VGA=y
-CONFIG_X50_BUTTONS=y
-CONFIG_X50_TS=y
-CONFIG_DRAM_BASE=0xa8000000
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_SSP is not set
-# CONFIG_PXA27x_VOLTAGE is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/eteng500/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/eteng500/defconfig
deleted file mode 100644
index 30484181aa..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/eteng500/defconfig
+++ /dev/null
@@ -1,1326 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C2410_BOOT_ERROR_RESET=y
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-
-#
-# S3C2400 Machines
-#
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-CONFIG_PM_H1940=y
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_VSTMS is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-CONFIG_MACH_G500=y
-
-#
-# S3C2442 Machines
-#
-# CONFIG_MACH_RX1950 is not set
-# CONFIG_MACH_HTCHERMES is not set
-# CONFIG_MACH_HTC_TRINITY is not set
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=200
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_S3C2410=m
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-CONFIG_MTD_NAND_S3C2410_HWECC=y
-CONFIG_MTD_NAND_S3C2410_CLKSTOP=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_S3C2410=y
-# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
-CONFIG_TOUCHSCREEN_S3C2410_ALT=y
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-# CONFIG_SERIAL_S3C2410_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_S3C24XX=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_BACKLIGHT_S3C2410=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_S3C2440=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-CONFIG_RTC_DRV_S3C=y
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C2410_PORT is not set
-CONFIG_DEBUG_S3C2410_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/gcc4x-limits.patch b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/gcc4x-limits.patch
deleted file mode 100644
index 02f3a5da09..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/gcc4x-limits.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- linux/scripts/mod/sumversion.c.orig	2008-11-15 12:22:04.000000000 +0000
-+++ linux/scripts/mod/sumversion.c	2008-11-15 12:22:21.000000000 +0000
-@@ -7,6 +7,7 @@
- #include <ctype.h>
- #include <errno.h>
- #include <string.h>
-+#include <linux/limits.h>
- #include "modpost.h"
- 
- /*
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h1910/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h1910/defconfig
deleted file mode 100644
index f77e63cb7e..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h1910/defconfig
+++ /dev/null
@@ -1,1407 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-CONFIG_ARCH_H1900=y
-CONFIG_IPAQ_H1900_LCD=y
-CONFIG_IPAQ_H1900_BUTTONS=y
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_SSP is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_ASIC3 is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_ASIC3 is not set
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_H1910=m
-CONFIG_SND_PXA2xx_I2SOUND=m
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-CONFIG_SND_UDA1380=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-CONFIG_MMC_ASIC3=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h2200/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h2200/defconfig
deleted file mode 100644
index 22e9cb3c93..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h2200/defconfig
+++ /dev/null
@@ -1,1803 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Wed Jan 28 17:24:55 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-CONFIG_DMABOUNCE=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-CONFIG_ARCH_H2200=y
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXC550 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PCMCIA_H2200=y
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_HAMCOP=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_ATMEL=m
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_USB_ZD1201=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_CS=m
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_H2200=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-CONFIG_W1_MASTER_DS1WM=y
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-CONFIG_ADC_SAMCOP=y
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-CONFIG_SOC_HAMCOP=y
-CONFIG_SOC_SAMCOP_DMA=y
-# CONFIG_SOC_SAMCOP_DMA_DEBUG is not set
-CONFIG_SOC_MQ11XX=y
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_HAMCOP=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_BACKLIGHT_H2200=y
-CONFIG_LCD_H2200=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
-CONFIG_FB_MQ1100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_H2200=m
-CONFIG_SND_PXA2xx_I2SOUND=m
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-CONFIG_SND_UDA1380=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-CONFIG_USB_PXA2XX_GPIO=y
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-CONFIG_MMC_SAMCOP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3600/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3600/defconfig
deleted file mode 100644
index 5f6104dad5..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3600/defconfig
+++ /dev/null
@@ -1,1324 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:39 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_H3800 is not set
-CONFIG_SA1100_H3XXX=y
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA56X is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_JORNADA820 is not set
-# CONFIG_SA1100_XDA is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-# CONFIG_H3600_SLEEVE is not set
-CONFIG_SA1100_USB=m
-# CONFIG_SA1100_USB_NETLINK is not set
-# CONFIG_SA1100_USB_CHAR is not set
-CONFIG_IPAQ_H3600_LCD=y
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_MICRO=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_IPAQ_MICRO=y
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_ADC_BATTERY is not set
-CONFIG_IPAQ_MICRO_BATTERY=y
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_IPAQ_MICRO=y
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_SA1100=y
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3800/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3800/defconfig
deleted file mode 100644
index 27ed4f4415..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3800/defconfig
+++ /dev/null
@@ -1,1322 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:40 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-CONFIG_SA1100_H3800=y
-CONFIG_SA1100_H3XXX=y
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA56X is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_JORNADA820 is not set
-# CONFIG_SA1100_XDA is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-CONFIG_SA1100_USB=m
-# CONFIG_SA1100_USB_NETLINK is not set
-# CONFIG_SA1100_USB_CHAR is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_ASIC2=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ASIC2=y
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-CONFIG_ADC_ASIC2=y
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_ASIC2=y
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_SA1100=y
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-# CONFIG_MMC_ASIC1 is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3900/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3900/defconfig
deleted file mode 100644
index 6aee3f7cbb..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h3900/defconfig
+++ /dev/null
@@ -1,1443 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:40 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-CONFIG_MACH_H3900=y
-CONFIG_IPAQ_H3900_LCD=y
-CONFIG_IPAQ_H3900_BACKLIGHT=y
-CONFIG_IPAQ_H3900_BATTERY=y
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_SSP is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_ASIC2=y
-# CONFIG_KEYBOARD_ASIC3 is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ASIC2=y
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-CONFIG_ADC_ASIC2=y
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_ASIC2=y
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_ASIC3 is not set
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-CONFIG_MMC_ASIC3=y
-# CONFIG_MMC_ASIC1 is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h4000/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h4000/defconfig
deleted file mode 100644
index 563dccf631..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h4000/defconfig
+++ /dev/null
@@ -1,1569 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:40 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-CONFIG_MACH_H4000=y
-CONFIG_MACH_H4300=y
-CONFIG_IPAQ_H4000_LCD=y
-CONFIG_IPAQ_H4000_PCMCIA=y
-CONFIG_IPAQ_H4000_BT=m
-CONFIG_IPAQ_H4300_KBD=y
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SSP=y
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_ACX=m
-# CONFIG_ACX_MEM is not set
-CONFIG_ACX_CS=y
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_ASIC3 is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_RS232_SERIAL=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_ADC_BATTERY=y
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ASIC3=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_H4000=m
-CONFIG_SND_PXA2xx_I2SOUND=m
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-CONFIG_SND_UDA1380=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-CONFIG_USB_PXA2XX_GPIO=y
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-CONFIG_MMC_ASIC3=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h5000/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h5000/defconfig
deleted file mode 100644
index f4dba6c720..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/h5000/defconfig
+++ /dev/null
@@ -1,1701 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:41 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-CONFIG_DMABOUNCE=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-CONFIG_ARCH_H5400=y
-CONFIG_IPAQ_H5400_LCD=y
-CONFIG_IPAQ_H5400_BL=y
-CONFIG_IPAQ_H5400_WIFI=m
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_SSP is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IPAQ is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ACX is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-CONFIG_GPIODEV_KEYS2=y
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_H5400_BUZZER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-CONFIG_W1_MASTER_DS1WM=y
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-CONFIG_ADC_SAMCOP=y
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-# CONFIG_IPAQ_SAMCOP_FSI is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-CONFIG_SOC_SAMCOP=y
-# CONFIG_SOC_HAMCOP is not set
-CONFIG_SOC_SAMCOP_DMA=y
-# CONFIG_SOC_SAMCOP_DMA_DEBUG is not set
-CONFIG_SOC_MQ11XX=y
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_SAMCOP=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
-CONFIG_FB_MQ1100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_I2S=m
-# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
-# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
-CONFIG_SND_PXA2XX_SOC_H5000=m
-# CONFIG_SND_PXA2XX_SOC_MIOA701 is not set
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-# CONFIG_SND_SOC_WM9705 is not set
-# CONFIG_SND_SOC_WM9713 is not set
-# CONFIG_SND_SOC_WM9712 is not set
-# CONFIG_SND_SOC_UDA1380 is not set
-CONFIG_SND_SOC_AK4535=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-CONFIG_MMC_SAMCOP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcalpine/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcalpine/defconfig
deleted file mode 100644
index a0693f3a53..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcalpine/defconfig
+++ /dev/null
@@ -1,1347 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:42 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-CONFIG_MACH_HTCALPINE=y
-CONFIG_HTCALPINE_CPLD=y
-CONFIG_HTCALPINE_PHONE=m
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_SSP is not set
-# CONFIG_PXA27x_VOLTAGE is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcapache/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcapache/defconfig
deleted file mode 100644
index 86b275b5ef..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcapache/defconfig
+++ /dev/null
@@ -1,1437 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:43 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_BOARD_IRQ_MAP_SMALL=y
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-CONFIG_MACH_HTCAPACHE=y
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA27x_VOLTAGE=y
-CONFIG_PXA27x_VOLTAGE_MAX158xx=y
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_HOSTAP is not set
-CONFIG_ACX=m
-CONFIG_ACX_MEM=y
-# CONFIG_ACX_CS is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_GPIODEV_KEYS=y
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-CONFIG_ADC_AD7877=y
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-CONFIG_HTC_EGPIO=y
-CONFIG_HTC_BBKEYS=y
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_HTCAPACHE=m
-CONFIG_SND_PXA2xx_I2SOUND=m
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-CONFIG_SND_AK4641=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-CONFIG_RTC_DRV_PCF8563=m
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcbeetles/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcbeetles/defconfig
deleted file mode 100644
index 0755cb2681..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcbeetles/defconfig
+++ /dev/null
@@ -1,1354 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:43 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-CONFIG_MACH_HTCBEETLES=y
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_HTCSABLE_LCD is not set
-# CONFIG_HTCSABLE_BACKLIGHT is not set
-# CONFIG_HTCSABLE_ROM is not set
-# CONFIG_HTCSABLE_BT is not set
-# CONFIG_HTCSABLE_PHONE is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_SSP is not set
-# CONFIG_PXA27x_VOLTAGE is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_ASIC3 is not set
-CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_ASIC3 is not set
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-# CONFIG_MMC_ASIC3 is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcblueangel/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcblueangel/defconfig
deleted file mode 100644
index 233a9665a4..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcblueangel/defconfig
+++ /dev/null
@@ -1,1590 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:43 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-CONFIG_MACH_BLUEANGEL=y
-CONFIG_MACH_BLUEANGEL_LCD=y
-CONFIG_MACH_BLUEANGEL_BACKLIGHT=y
-CONFIG_MACH_BLUEANGEL_DS1WM=y
-CONFIG_MACH_BLUEANGEL_PCMCIA=y
-CONFIG_MACH_BLUEANGEL_SUSPEND=y
-CONFIG_MACH_BLUEANGEL_LEDS=y
-CONFIG_MACH_BLUEANGEL_ASIC3_LEDS=y
-CONFIG_MACH_BLUEANGEL_KEYPAD=y
-CONFIG_MACH_BLUEANGEL_POWER=y
-CONFIG_MACH_BLUEANGEL_ROM=y
-CONFIG_MACH_BLUEANGEL_DPRAM=y
-CONFIG_MACH_BLUEANGEL_PHONE=m
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-CONFIG_PXA26x=y
-CONFIG_PXA_SSP=y
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IPAQ is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_ACX=m
-# CONFIG_ACX_MEM is not set
-CONFIG_ACX_CS=y
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_ASIC3=y
-CONFIG_KEYBOARD_TSC2200=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_TSC2200=y
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-CONFIG_TIHTC=m
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-CONFIG_W1_MASTER_DS1WM=y
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-CONFIG_ADC_TSC2200_SSP=y
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-CONFIG_SOC_TSC2200=y
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ASIC3=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
-CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_I2S=m
-CONFIG_SND_PXA2XX_SOC_SSP=m
-# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
-CONFIG_SND_PXA2XX_SOC_BLUEANGEL=m
-# CONFIG_SND_PXA2XX_SOC_H5000 is not set
-# CONFIG_SND_PXA2XX_SOC_MIOA701 is not set
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-# CONFIG_SND_SOC_WM9705 is not set
-# CONFIG_SND_SOC_WM9713 is not set
-# CONFIG_SND_SOC_WM9712 is not set
-CONFIG_SND_SOC_UDA1380=m
-# CONFIG_SND_SOC_AK4535 is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-CONFIG_USB_PXA2XX_GPIO=y
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-CONFIG_MMC_ASIC3=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htchimalaya/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htchimalaya/defconfig
deleted file mode 100644
index b2a461f026..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htchimalaya/defconfig
+++ /dev/null
@@ -1,1350 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:44 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-CONFIG_MACH_HIMALAYA=y
-# CONFIG_MACH_HIMALAYA_ASIC3 is not set
-# CONFIG_MACH_HIMALAYA_ROM is not set
-# CONFIG_HIMALAYA_LEDS is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-CONFIG_PXA26x=y
-# CONFIG_PXA_SSP is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_ASIC3 is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_ASIC3 is not set
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-# CONFIG_MMC_ASIC3 is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcsable/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcsable/defconfig
deleted file mode 100644
index 0eccbe2a67..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcsable/defconfig
+++ /dev/null
@@ -1,1465 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:44 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-CONFIG_MACH_HW6900=y
-CONFIG_HTCSABLE_LCD=y
-CONFIG_HTCSABLE_BACKLIGHT=y
-# CONFIG_HTCSABLE_ROM is not set
-# CONFIG_HTCSABLE_BT is not set
-# CONFIG_HTCSABLE_PHONE is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_SSP is not set
-# CONFIG_PXA27x_VOLTAGE is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IPAQ is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_HOSTAP is not set
-CONFIG_ACX=m
-CONFIG_ACX_MEM=y
-# CONFIG_ACX_CS is not set
-CONFIG_ACX_HTCSABLE=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_ASIC3 is not set
-CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_ASIC3 is not set
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_HTCSABLE=m
-CONFIG_SND_PXA2xx_I2SOUND=m
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-CONFIG_SND_AK4641=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-CONFIG_MMC_ASIC3=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcuniversal/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcuniversal/defconfig
deleted file mode 100644
index 8ceed2bcf9..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcuniversal/defconfig
+++ /dev/null
@@ -1,1471 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:45 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-CONFIG_MACH_HTCUNIVERSAL=y
-CONFIG_HTCUNIVERSAL_CORE=y
-CONFIG_HTCUNIVERSAL_UDC=y
-CONFIG_HTCUNIVERSAL_POWER=y
-CONFIG_HTCUNIVERSAL_BACKLIGHT=y
-CONFIG_HTCUNIVERSAL_LCD=y
-CONFIG_HTCUNIVERSAL_TS2=m
-CONFIG_HTCUNIVERSAL_BUTTONS=y
-CONFIG_HTCUNIVERSAL_BLUETOOTH=m
-CONFIG_HTCUNIVERSAL_ASIC3_LEDS=y
-CONFIG_HTCUNIVERSAL_PHONE=m
-# CONFIG_HTCUNIVERSAL_MDOC_G3 is not set
-CONFIG_HTCUNIVERSAL_AK4641=m
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_SSP is not set
-# CONFIG_PXA27x_VOLTAGE is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_HOSTAP is not set
-CONFIG_ACX=m
-CONFIG_ACX_MEM=y
-# CONFIG_ACX_CS is not set
-CONFIG_ACX_HTCUNIVERSAL=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_ASIC3=y
-CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-CONFIG_W1_MASTER_DS1WM=y
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-CONFIG_HTC_ASIC3_DS1WM=y
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ASIC3=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_HTCUNIVERSAL=m
-CONFIG_SND_PXA2xx_I2SOUND=m
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-CONFIG_MMC_ASIC3=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcwallaby/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcwallaby/defconfig
deleted file mode 100644
index bee3188c64..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/htcwallaby/defconfig
+++ /dev/null
@@ -1,1322 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:45 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA56X is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_JORNADA820 is not set
-CONFIG_SA1100_XDA=y
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-CONFIG_SA1100_USB=m
-# CONFIG_SA1100_USB_NETLINK is not set
-# CONFIG_SA1100_USB_CHAR is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IPAQ is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_SA1100=y
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/hx4700/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/hx4700/defconfig
deleted file mode 100644
index d573ed3ea0..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/hx4700/defconfig
+++ /dev/null
@@ -1,1487 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Fri Jan 30 11:53:32 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-CONFIG_MACH_H4700=y
-CONFIG_HX4700_NAVPOINT=y
-CONFIG_HX4700_CORE=y
-# CONFIG_HX4700_BLUETOOTH is not set
-CONFIG_HX4700_PCMCIA=y
-CONFIG_HX4700_LCD=y
-CONFIG_HX4700_LEDS=y
-CONFIG_HX4700_POWER2=y
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X30 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXC550 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SUSPEND_SAVE_EXTRA_REGS=y
-# CONFIG_PXA27x_VOLTAGE is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IPAQ is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_ASIC3 is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-CONFIG_MOUSE_NAVPOINT=y
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_RS232_SERIAL=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_BATTERY_DS2760=y
-CONFIG_ADC_BATTERY=y
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_HTC_PASIC3 is not set
-CONFIG_HTC_EGPIO=y
-# CONFIG_HTC_BBKEYS is not set
-CONFIG_HTC_ASIC3_DS1WM=y
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ASIC3=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
-CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-CONFIG_USB_SL811_HCD=y
-CONFIG_USB_SL811_CS=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-CONFIG_USB_PXA2XX_GPIO=y
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-CONFIG_MMC_ASIC3=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/linux-2.6.git-9d20fdd58e74d4d26dc5216efaaa0f800c23dd3a.patch b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/linux-2.6.git-9d20fdd58e74d4d26dc5216efaaa0f800c23dd3a.patch
deleted file mode 100644
index f3c27d33a8..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/linux-2.6.git-9d20fdd58e74d4d26dc5216efaaa0f800c23dd3a.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-From: Bill Gatliff <bgat@billgatliff.com>
-Date: Thu, 31 May 2007 21:02:22 +0000 (+0100)
-Subject: [ARM] 4423/1: add ATAGS support
-X-Git-Tag: v2.6.23-rc1~1101^2^7~5
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=9d20fdd58e74d4d26dc5216efaaa0f800c23dd3a
-
-[ARM] 4423/1: add ATAGS support
-
-Examines the ATAGS pointer (r2) at boot, and interprets
-a nonzero value as a reference to an ATAGS structure. A
-suitable ATAGS structure replaces the kernel's command line.
-
-Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
-
-diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
-index a52da0d..024a9cf 100644
---- a/arch/arm/kernel/head-common.S
-+++ b/arch/arm/kernel/head-common.S
-@@ -20,7 +20,8 @@ __switch_data:
- 	.long	_end				@ r7
- 	.long	processor_id			@ r4
- 	.long	__machine_arch_type		@ r5
--	.long	cr_alignment			@ r6
-+	.long	__atags_pointer			@ r6
-+	.long	cr_alignment			@ r7
- 	.long	init_thread_union + THREAD_START_SP @ sp
- 
- /*
-@@ -29,6 +30,7 @@ __switch_data:
-  *
-  *  r0  = cp#15 control register
-  *  r1  = machine ID
-+ *  r2  = atags pointer
-  *  r9  = processor ID
-  */
- 	.type	__mmap_switched, %function
-@@ -47,11 +49,12 @@ __mmap_switched:
- 	strcc	fp, [r6],#4
- 	bcc	1b
- 
--	ldmia	r3, {r4, r5, r6, sp}
-+	ldmia	r3, {r4, r5, r6, r7, sp}
- 	str	r9, [r4]			@ Save processor ID
- 	str	r1, [r5]			@ Save machine type
-+	str	r2, [r6]			@ Save atags pointer
- 	bic	r4, r0, #CR_A			@ Clear 'A' bit
--	stmia	r6, {r0, r4}			@ Save control register values
-+	stmia	r7, {r0, r4}			@ Save control register values
- 	b	start_kernel
- 
- /*
-@@ -215,3 +218,34 @@ ENTRY(lookup_machine_type)
- 	bl	__lookup_machine_type
- 	mov	r0, r5
- 	ldmfd	sp!, {r4 - r6, pc}
-+
-+/* Determine validity of the r2 atags pointer.  The heuristic requires
-+ * that the pointer be aligned, in the first 16k of physical RAM and
-+ * that the ATAG_CORE marker is first and present.  Future revisions
-+ * of this function may be more lenient with the physical address and
-+ * may also be able to move the ATAGS block if necessary.
-+ *
-+ * r8  = machinfo
-+ *
-+ * Returns:
-+ *  r2 either valid atags pointer, or zero
-+ *  r5, r6 corrupted
-+ */
-+
-+	.type	__vet_atags, %function
-+__vet_atags:
-+	tst	r2, #0x3			@ aligned?
-+	bne	1f
-+
-+	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
-+	subs	r5, r5, #ATAG_CORE_SIZE
-+	bne	1f
-+	ldr	r5, [r2, #4]
-+	ldr	r6, =ATAG_CORE
-+	cmp	r5, r6
-+	bne	1f
-+
-+	mov	pc, lr				@ atag pointer is ok
-+
-+1:	mov	r2, #0
-+	mov	pc, lr
-diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
-index 41f98b4..7898cbc 100644
---- a/arch/arm/kernel/head.S
-+++ b/arch/arm/kernel/head.S
-@@ -29,6 +29,10 @@
- #define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
- #define KERNEL_RAM_PADDR	(PHYS_OFFSET + TEXT_OFFSET)
- 
-+#define ATAG_CORE 0x54410001
-+#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
-+
-+
- /*
-  * swapper_pg_dir is the virtual address of the initial page table.
-  * We place the page tables 16K below KERNEL_RAM_VADDR.  Therefore, we must
-@@ -61,7 +65,7 @@
-  *
-  * This is normally called from the decompressor code.  The requirements
-  * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
-- * r1 = machine nr.
-+ * r1 = machine nr, r2 = atags pointer.
-  *
-  * This code is mostly position independent, so if you link the kernel at
-  * 0xc0008000, you call this at __pa(0xc0008000).
-@@ -85,6 +89,7 @@ ENTRY(stext)
- 	bl	__lookup_machine_type		@ r5=machinfo
- 	movs	r8, r5				@ invalid machine (r5=0)?
- 	beq	__error_a			@ yes, error 'a'
-+	bl	__vet_atags
- 	bl	__create_page_tables
- 
- 	/*
-diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
-index 650eac1..5be2e98 100644
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -63,6 +63,8 @@ unsigned int processor_id;
- unsigned int __machine_arch_type;
- EXPORT_SYMBOL(__machine_arch_type);
- 
-+unsigned int __atags_pointer __initdata;
-+
- unsigned int system_rev;
- EXPORT_SYMBOL(system_rev);
- 
-@@ -780,7 +782,9 @@ void __init setup_arch(char **cmdline_p)
- 	if (mdesc->soft_reboot)
- 		reboot_setup("s");
- 
--	if (mdesc->boot_params)
-+	if (__atags_pointer)
-+		tags = phys_to_virt(__atags_pointer);
-+	else if (mdesc->boot_params)
- 		tags = phys_to_virt(mdesc->boot_params);
- 
- 	/*
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/looxc550/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/looxc550/defconfig
deleted file mode 100644
index 7b6cef9d9f..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/looxc550/defconfig
+++ /dev/null
@@ -1,1351 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:46 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_LOOXN560_SOUND is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-CONFIG_MACH_LOOXN560=y
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_SSP is not set
-# CONFIG_PXA27x_VOLTAGE is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_ADC_BATTERY=y
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=y
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-CONFIG_HTC_EGPIO=y
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/magician/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/magician/defconfig
deleted file mode 100644
index 1f4467cfa0..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/magician/defconfig
+++ /dev/null
@@ -1,1679 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:42 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_BOARD_IRQ_MAP_SMALL=y
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_TOSHIBA_TMIO_OHCI is not set
-# CONFIG_ARCH_ESERIES is not set
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-CONFIG_MACH_MAGICIAN=y
-CONFIG_MAGICIAN_PM=y
-CONFIG_MAGICIAN_TS=m
-CONFIG_MAGICIAN_LCD=y
-CONFIG_MAGICIAN_PHONE=m
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXN560 is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=m
-CONFIG_PXA_SUSPEND_SAVE_EXTRA_REGS=y
-CONFIG_PXA27x_VOLTAGE=m
-CONFIG_PXA27x_VOLTAGE_MAX158xx=m
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=m
-CONFIG_PXA25x_ALTERNATE_FREQS=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IPAQ is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_ADC=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_PXA_IR=y
-CONFIG_SERIAL_CORE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-CONFIG_TIHTC=m
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-CONFIG_W1_MASTER_DS1WM=y
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_BATTERY_DS2760=y
-CONFIG_ADC_BATTERY=y
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-CONFIG_ADC_ADS7846_SSP=m
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-CONFIG_HTC_PASIC3=y
-CONFIG_HTC_EGPIO=y
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_PASIC3=y
-CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HWTIMER=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_I2S=m
-CONFIG_SND_PXA2XX_SOC_SSP=m
-CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
-# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
-# CONFIG_SND_PXA2XX_SOC_H5000 is not set
-# CONFIG_SND_PXA2XX_SOC_MIOA701 is not set
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-# CONFIG_SND_SOC_WM9705 is not set
-# CONFIG_SND_SOC_WM9713 is not set
-# CONFIG_SND_SOC_WM9712 is not set
-CONFIG_SND_SOC_UDA1380=m
-# CONFIG_SND_SOC_AK4535 is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA27X_DMA is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/rx1950/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/rx1950/defconfig
deleted file mode 100644
index fc4388ebed..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/rx1950/defconfig
+++ /dev/null
@@ -1,1383 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:46 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-# CONFIG_BOARD_IRQ_MAP_BIG is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_CPU_S3C244X=y
-# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-CONFIG_PM_H1940=y
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_VSTMS is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-# CONFIG_MACH_G500 is not set
-CONFIG_CPU_S3C2442=y
-
-#
-# S3C2442 Machines
-#
-CONFIG_MACH_RX1950=y
-# CONFIG_MACH_HTCHERMES is not set
-# CONFIG_MACH_HTC_TRINITY is not set
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=200
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
-CONFIG_ATAGS_PROC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_S3C2410=m
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_S3C2410=y
-CONFIG_TOUCHSCREEN_S3C2410_DEBUG=y
-CONFIG_TOUCHSCREEN_S3C2410_ALT=y
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_S3C24XX=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_BACKLIGHT_S3C2410=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_S3C2410 is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_S3C2440=y
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-CONFIG_RTC_DRV_S3C=y
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C2410_PORT=y
-CONFIG_DEBUG_S3C2410_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/rx3000/defconfig b/packages/kexecboot/linux-kexecboot-2.6.21-hh20/rx3000/defconfig
deleted file mode 100644
index 582be18242..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.21-hh20/rx3000/defconfig
+++ /dev/null
@@ -1,1507 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh20
-# Tue Dec  2 15:36:46 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=m
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-CONFIG_PLAT_S3C24XX=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C2410_BOOT_ERROR_RESET=y
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=2
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-
-#
-# S3C2400 Machines
-#
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-CONFIG_PM_H1940=y
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_VSTMS is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-CONFIG_MACH_RX3715=y
-CONFIG_RX3000_BACKLIGHT=y
-CONFIG_RX3000_LEDS=y
-CONFIG_RX3000_BATTERY=y
-CONFIG_RX3000_BLUETOOTH=m
-CONFIG_RX3000_BUTTONS=y
-CONFIG_RX3000_SERIAL=y
-CONFIG_RX3000_TS=y
-CONFIG_RX3000_UDC=m
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-# CONFIG_MACH_G500 is not set
-
-#
-# S3C2442 Machines
-#
-# CONFIG_MACH_RX1950 is not set
-# CONFIG_MACH_HTCHERMES is not set
-# CONFIG_MACH_HTC_TRINITY is not set
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Linux As Bootloader
-#
-# CONFIG_LAB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=200
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_TXTOFFSET_DELTA=y
-CONFIG_TXTOFFSET_DELTA_VALUE=0x00090000
-CONFIG_ATAGS_PROC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_DPM_DEBUG=y
-CONFIG_PM_SYSFS_DEPRECATED=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTDRAM_ERASE_SIZE=256
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-CONFIG_MTD_NAND_S3C2410_CLKSTOP=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_HOSTAP is not set
-CONFIG_ACX=m
-CONFIG_ACX_MEM=y
-# CONFIG_ACX_CS is not set
-CONFIG_ACX_RX3000=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIODEV_KEYS is not set
-# CONFIG_GPIODEV_KEYS2 is not set
-# CONFIG_GPIODEV_DIAGONAL is not set
-CONFIG_KEYBOARD_ASIC3=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_S3C2410=y
-# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
-# CONFIG_TOUCHSCREEN_S3C2410_ALT is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_RS232_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_S3C2410=m
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-CONFIG_W1_MASTER_DS1WM=y
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_ADC_BATTERY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_ADC=y
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_TSC2200_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-CONFIG_HTC_ASIC3=y
-# CONFIG_ATI_W228x is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-CONFIG_HTC_ASIC3_DS1WM=y
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_S3C24XX is not set
-CONFIG_LEDS_ASIC3=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HWTIMER is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LEDS_TRIGGER_SHARED=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-CONFIG_BACKLIGHT_S3C2410=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_IMAGEON is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_S3C2410 is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-CONFIG_SND_S3C24XX_SOC=m
-CONFIG_SND_S3C24XX_SOC_I2S=m
-CONFIG_SND_S3C24XX_SOC_RX3000=m
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-# CONFIG_SND_SOC_WM9705 is not set
-# CONFIG_SND_SOC_WM9713 is not set
-# CONFIG_SND_SOC_WM9712 is not set
-CONFIG_SND_SOC_UDA1380=m
-# CONFIG_SND_SOC_AK4535 is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_S3C2440 is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_MMC_SAMCOP is not set
-CONFIG_MMC_ASIC3=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-CONFIG_RTC_DRV_S3C=y
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C2410_PORT is not set
-CONFIG_DEBUG_S3C2410_UART=2
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/80-kexec-atags.patch b/packages/kexecboot/linux-kexecboot-2.6.24/80-kexec-atags.patch
deleted file mode 100644
index bf97f2105b..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/80-kexec-atags.patch
+++ /dev/null
@@ -1,111 +0,0 @@
---- linux-2.6.21.5/arch/arm/kernel/setup.c.orig	2007-06-30 16:39:38.000000000 -0500
-+++ linux-2.6.21.5/arch/arm/kernel/setup.c	2007-06-30 19:02:51.000000000 -0500
-@@ -23,6 +23,7 @@
- #include <linux/cpu.h>
- #include <linux/interrupt.h>
- #include <linux/smp.h>
-+#include <linux/kexec.h>
- 
- #include <asm/cpu.h>
- #include <asm/elf.h>
-@@ -767,6 +768,23 @@
- }
- arch_initcall(customize_machine);
- 
-+#ifdef CONFIG_KEXEC
-+
-+/* Physical addr of where the boot params should be for this machine */
-+extern unsigned long kexec_boot_params_address;
-+
-+/* Physical addr of the buffer into which the boot params are copied */
-+extern unsigned long kexec_boot_params_copy;
-+
-+/* Pointer to the boot params buffer, for manipulation and display */
-+unsigned long kexec_boot_params;
-+EXPORT_SYMBOL(kexec_boot_params);
-+
-+/* The buffer itself - make sure it is sized correctly */
-+static unsigned long kexec_boot_params_buf[(KEXEC_BOOT_PARAMS_SIZE + 3) / 4];
-+
-+#endif
-+
- void __init setup_arch(char **cmdline_p)
- {
- 	struct tag *tags = (struct tag *)&init_tags;
-@@ -783,6 +801,13 @@
- 	if (mdesc->boot_params)
- 		tags = phys_to_virt(mdesc->boot_params);
- 
-+#ifdef CONFIG_KEXEC
-+	kexec_boot_params_address = mdesc->boot_params;
-+	kexec_boot_params_copy = virt_to_phys(kexec_boot_params_buf);
-+	kexec_boot_params = (unsigned long)kexec_boot_params_buf;
-+	if (mdesc->boot_params)
-+		memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
-+#endif
- 	/*
- 	 * If we have the old style parameters, convert them to
- 	 * a tag list.
---- linux-2.6.21.5/arch/arm/kernel/relocate_kernel.S.orig	2007-06-30 16:39:28.000000000 -0500
-+++ linux-2.6.21.5/arch/arm/kernel/relocate_kernel.S	2007-06-30 19:10:32.000000000 -0500
-@@ -7,6 +7,23 @@
- 	.globl relocate_new_kernel
- relocate_new_kernel:
- 
-+	/* Move boot params back to where the kernel expects them */
-+
-+	ldr	r0,kexec_boot_params_address
-+	teq	r0,#0
-+	beq	8f
-+	
-+	ldr	r1,kexec_boot_params_copy
-+	mov	r6,#KEXEC_BOOT_PARAMS_SIZE/4
-+7:
-+	ldr	r5,[r1],#4
-+	str	r5,[r0],#4
-+	subs	r6,r6,#1
-+	bne	7b
-+	
-+8:	
-+	/* Boot params moved, now go on with the kernel */
-+	
- 	ldr	r0,kexec_indirection_page
- 	ldr	r1,kexec_start_address
- 
-@@ -50,7 +67,7 @@
- 	mov lr,r1
- 	mov r0,#0
- 	ldr r1,kexec_mach_type
--	mov r2,#0
-+	ldr r2,kexec_boot_params_address
- 	mov pc,lr
- 
- 	.globl kexec_start_address
-@@ -65,6 +82,16 @@
- kexec_mach_type:
- 	.long	0x0
- 
-+	/* phy addr where new kernel will expect to find boot params */
-+	.globl kexec_boot_params_address
-+kexec_boot_params_address:
-+	.long	0x0
-+
-+	/* phy addr where old kernel put a copy of orig boot params */
-+	.globl kexec_boot_params_copy
-+kexec_boot_params_copy:
-+	.long	0x0
-+
- relocate_new_kernel_end:
- 
- 	.globl relocate_new_kernel_size
---- linux-2.6.21.5/include/asm-arm/kexec.h.orig	2007-06-30 16:41:17.000000000 -0500
-+++ linux-2.6.21.5/include/asm-arm/kexec.h	2007-06-30 19:11:22.000000000 -0500
-@@ -14,6 +14,8 @@
- 
- #define KEXEC_ARCH KEXEC_ARCH_ARM
- 
-+#define KEXEC_BOOT_PARAMS_SIZE 1536
-+
- #ifndef __ASSEMBLY__
- 
- #define MAX_NOTE_BYTES 1024
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/akita/defconfig b/packages/kexecboot/linux-kexecboot-2.6.24/akita/defconfig
deleted file mode 100644
index 3b35eda5db..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/akita/defconfig
+++ /dev/null
@@ -1,1239 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Feb  1 01:28:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_PXA_SHARPSL_25x is not set
-CONFIG_PXA_SHARPSL_27x=y
-# CONFIG_MACH_HTCUNIVERSAL is not set
-CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
-CONFIG_MACH_BORZOI=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_POWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_SHARPSL_RC=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_LCD_QVGA=y
-# CONFIG_FB_PXA_LCD_VGA is not set
-CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
-CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=m
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_SPITZ=y
-# CONFIG_LEDS_TOSA is not set
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/binutils-buildid-arm.patch b/packages/kexecboot/linux-kexecboot-2.6.24/binutils-buildid-arm.patch
deleted file mode 100644
index 68e35e89e1..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/binutils-buildid-arm.patch
+++ /dev/null
@@ -1,16 +0,0 @@
----
- arch/arm/kernel/vmlinux.lds.S |    1 +
- 1 file changed, 1 insertion(+)
-
-Index: linux-2.6.22/arch/arm/kernel/vmlinux.lds.S
-===================================================================
---- linux-2.6.22.orig/arch/arm/kernel/vmlinux.lds.S	2007-09-11 18:32:29.000000000 +0200
-+++ linux-2.6.22/arch/arm/kernel/vmlinux.lds.S	2007-09-11 18:33:42.000000000 +0200
-@@ -94,6 +94,7 @@
- 			TEXT_TEXT
- 			SCHED_TEXT
- 			LOCK_TEXT
-+			*(.note.*)
- #ifdef CONFIG_MMU
- 			*(.fixup)
- #endif
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/c7x0/defconfig b/packages/kexecboot/linux-kexecboot-2.6.24/c7x0/defconfig
deleted file mode 100644
index bc621636fa..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/c7x0/defconfig
+++ /dev/null
@@ -1,1233 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Feb  1 01:19:01 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA_SHARPSL_25x=y
-# CONFIG_PXA_SHARPSL_27x is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_POODLE is not set
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
-# CONFIG_MACH_TOSA is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SHARP_C7xx=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_POWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_CORGI=y
-# CONFIG_KEYBOARD_SPITZ is not set
-CONFIG_SHARPSL_RC=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
-CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
-CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-CONFIG_USB_PXA2XX_SMALL=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_CORGI=y
-# CONFIG_LEDS_TOSA is not set
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/connectplus-prevent-oops-HACK.patch b/packages/kexecboot/linux-kexecboot-2.6.24/connectplus-prevent-oops-HACK.patch
deleted file mode 100644
index b5439c62e7..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/connectplus-prevent-oops-HACK.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Index: linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c
-===================================================================
---- linux-2.6.21.orig/drivers/net/wireless/hostap/hostap_hw.c	2007-07-07 12:45:39.000000000 +0100
-+++ linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c	2007-07-07 12:47:30.000000000 +0100
-@@ -2666,6 +2666,12 @@
- 	iface = netdev_priv(dev);
- 	local = iface->local;
- 
-+	if(dev->base_addr == 0)
-+	{
-+		printk(KERN_DEBUG "%s: IRQ before base_addr set\n", dev->name);
-+		return IRQ_HANDLED;
-+	}
-+
- 	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
- 
- 	if (local->func->card_present && !local->func->card_present(local)) {
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/connectplus-remove-ide-HACK.patch b/packages/kexecboot/linux-kexecboot-2.6.24/connectplus-remove-ide-HACK.patch
deleted file mode 100644
index 4414b21191..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/connectplus-remove-ide-HACK.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-Index: linux-2.6.13/drivers/ide/legacy/ide-cs.c
-===================================================================
---- linux-2.6.13.orig/drivers/ide/legacy/ide-cs.c	2005-09-01 22:43:46.000000000 +0100
-+++ linux-2.6.13/drivers/ide/legacy/ide-cs.c	2005-09-01 22:45:46.000000000 +0100
-@@ -488,7 +488,6 @@
- 	PCMCIA_DEVICE_PROD_ID123("KODAK Picture Card       ", "KODAK  ", "V100K", 0x94a0d8f3, 0xe4fc3ea0, 0xe5e7eed4),
- 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
- 	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
--	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
- 	PCMCIA_DEVICE_NULL,
- };
- MODULE_DEVICE_TABLE(pcmcia, ide_ids);
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/hostap-monitor-mode.patch b/packages/kexecboot/linux-kexecboot-2.6.24/hostap-monitor-mode.patch
deleted file mode 100644
index 641fd19e50..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/hostap-monitor-mode.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-This is a patch that I've been maintaining for a few years, and I'd 
-really like to see it added to the mainstream zaurus kernel so I can 
-finally stop distributing my own.
-
-This patch only effects the card while in monitor mode, and does not 
-cause any known stability issues.
-
-http://patches.aircrack-ng.org/hostap-kernel-2.6.18.patch
-
-Rick Farina (Zero_Chaos)
-
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c	2006-09-21 01:30:18.000000000 -0400
-@@ -69,6 +69,9 @@
- 	iface = netdev_priv(dev);
- 	local = iface->local;
- 
-+	if (local->iw_mode == IW_MODE_MONITOR)
-+		goto xmit;
-+
- 	if (skb->len < ETH_HLEN) {
- 		printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
- 		       "(len=%d)\n", dev->name, skb->len);
-@@ -234,6 +237,7 @@
- 		memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN);
- 	}
- 
-+xmit:
- 	iface->stats.tx_packets++;
- 	iface->stats.tx_bytes += skb->len;
- 
-@@ -404,8 +408,6 @@
- 	}
- 
- 	if (skb->len < 24) {
--		printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
--		       "(len=%d)\n", dev->name, skb->len);
- 		ret = 0;
- 		iface->stats.tx_dropped++;
- 		goto fail;
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.orig
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.rej
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c	2006-09-21 01:30:18.000000000 -0400
-@@ -1005,6 +1005,35 @@
- 	return fid;
- }
- 
-+static int prism2_monitor_enable(struct net_device *dev)
-+{
-+	if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) {
-+		printk(KERN_DEBUG "Port type setting for monitor mode "
-+			"failed\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8),
-+			     0, NULL, NULL)) {
-+		printk(KERN_DEBUG "Could not enter testmode 0x0a\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
-+			    HFA384X_WEPFLAGS_PRIVACYINVOKED |
-+			    HFA384X_WEPFLAGS_HOSTENCRYPT |
-+			    HFA384X_WEPFLAGS_HOSTDECRYPT)) {
-+		printk(KERN_DEBUG "WEP flags setting failed\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) {
-+		printk(KERN_DEBUG "Could not set promiscuous mode\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return 0;
-+}
- 
- static int prism2_reset_port(struct net_device *dev)
- {
-@@ -1031,6 +1060,10 @@
- 			       "port\n", dev->name);
- 	}
- 
-+	if (local->iw_mode == IW_MODE_MONITOR)
-+		/* force mode 0x0a after port 0 reset */
-+		return prism2_monitor_enable(dev);
-+
- 	/* It looks like at least some STA firmware versions reset
- 	 * fragmentation threshold back to 2346 after enable command. Restore
- 	 * the configured value, if it differs from this default. */
-@@ -1466,6 +1499,10 @@
- 		return 1;
- 	}
- 
-+	if (local->iw_mode == IW_MODE_MONITOR)
-+		/* force mode 0x0a after port 0 reset */
-+		prism2_monitor_enable(dev);
-+
- 	local->hw_ready = 1;
- 	local->hw_reset_tries = 0;
- 	local->hw_resetting = 0;
-@@ -3156,6 +3193,7 @@
- 	local->func->hw_config = prism2_hw_config;
- 	local->func->hw_reset = prism2_hw_reset;
- 	local->func->hw_shutdown = prism2_hw_shutdown;
-+	local->func->monitor_enable = prism2_monitor_enable;
- 	local->func->reset_port = prism2_reset_port;
- 	local->func->schedule_reset = prism2_schedule_reset;
- #ifdef PRISM2_DOWNLOAD_SUPPORT
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_hw.c.orig
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c	2006-09-21 01:30:18.000000000 -0400
-@@ -1104,33 +1104,7 @@
- 
- 	printk(KERN_DEBUG "Enabling monitor mode\n");
- 	hostap_monitor_set_type(local);
--
--	if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
--			    HFA384X_PORTTYPE_PSEUDO_IBSS)) {
--		printk(KERN_DEBUG "Port type setting for monitor mode "
--		       "failed\n");
--		return -EOPNOTSUPP;
--	}
--
--	/* Host decrypt is needed to get the IV and ICV fields;
--	 * however, monitor mode seems to remove WEP flag from frame
--	 * control field */
--	if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
--			    HFA384X_WEPFLAGS_HOSTENCRYPT |
--			    HFA384X_WEPFLAGS_HOSTDECRYPT)) {
--		printk(KERN_DEBUG "WEP flags setting failed\n");
--		return -EOPNOTSUPP;
--	}
--
--	if (local->func->reset_port(dev) ||
--	    local->func->cmd(dev, HFA384X_CMDCODE_TEST |
--			     (HFA384X_TEST_MONITOR << 8),
--			     0, NULL, NULL)) {
--		printk(KERN_DEBUG "Setting monitor mode failed\n");
--		return -EOPNOTSUPP;
--	}
--
--	return 0;
-+	return local->func->reset_port(dev);
- }
- 
- 
-@@ -1199,7 +1173,7 @@
- 	local->iw_mode = *mode;
- 
- 	if (local->iw_mode == IW_MODE_MONITOR)
--		hostap_monitor_mode_enable(local);
-+		return hostap_monitor_mode_enable(local);
- 	else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt &&
- 		 !local->fw_encrypt_ok) {
- 		printk(KERN_DEBUG "%s: defaulting to host-based encryption as "
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c	2006-09-21 01:30:18.000000000 -0400
-@@ -331,7 +331,7 @@
- 	if (local->iw_mode == IW_MODE_REPEAT)
- 		return HFA384X_PORTTYPE_WDS;
- 	if (local->iw_mode == IW_MODE_MONITOR)
--		return HFA384X_PORTTYPE_PSEUDO_IBSS;
-+		return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/
- 	return HFA384X_PORTTYPE_HOSTAP;
- }
- 
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_main.c.orig
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c	2006-09-21 01:30:18.000000000 -0400
-@@ -48,6 +48,8 @@
- 	{ 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID },
- 	/* Samsung MagicLAN SWL-2210P */
- 	{ 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID },
-+	/* NETGEAR MA311 */
-+	{ 0x1385, 0x3872, PCI_ANY_ID, PCI_ANY_ID },
- 	{ 0 }
- };
- 
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_pci.c.orig
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c	2006-09-21 01:30:18.000000000 -0400
-@@ -101,6 +101,7 @@
- 	{ 0xc250, 0x0002 } /* EMTAC A2424i */,
- 	{ 0xd601, 0x0002 } /* Z-Com XI300 */,
- 	{ 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
-+	{ 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */,
- 	{ 0, 0}
- };
- 
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_plx.c.orig
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h	2006-09-21 01:30:18.000000000 -0400
-@@ -575,6 +575,7 @@
- 	int (*hw_config)(struct net_device *dev, int initial);
- 	void (*hw_reset)(struct net_device *dev);
- 	void (*hw_shutdown)(struct net_device *dev, int no_disable);
-+	int (*monitor_enable)(struct net_device *dev);
- 	int (*reset_port)(struct net_device *dev);
- 	void (*schedule_reset)(local_info_t *local);
- 	int (*download)(local_info_t *local,
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/hrw-hostapcard.patch b/packages/kexecboot/linux-kexecboot-2.6.24/hrw-hostapcard.patch
deleted file mode 100644
index 67fc5b7c70..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/hrw-hostapcard.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-
-From: Marcin Juszkiewicz <openembedded@haerwu.biz>
-
-Card reported by Ångström user:
-http://bugs.openembedded.net/show_bug.cgi?id=3236
-
-Socket 1:
-   product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", ""
-   manfid: 0x0156, 0x0002
-   function: 6 (network)
-
-Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz>
-Acked-by: Pavel Roskin <proski@gnu.org>
-
----
- drivers/net/wireless/hostap/hostap_cs.c |    3 +++
- 1 file changed, 3 insertions(+)
-
---- linux-2.6.24.orig/drivers/net/wireless/hostap/hostap_cs.c
-+++ linux-2.6.24/drivers/net/wireless/hostap/hostap_cs.c
-@@ -892,10 +892,13 @@ static struct pcmcia_device_id hostap_cs
- 		0xa21501a, 0x59868926, 0xc9049a39),
- 	PCMCIA_DEVICE_PROD_ID1234(
- 		"The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P",
- 		"RevA",
- 		0xa5f472c2, 0x9c05598d, 0xc9049a39, 0x57a66194),
-+	PCMCIA_DEVICE_PROD_ID123(
-+		"Wireless LAN" , "11Mbps PC Card", "Version 01.02",
-+		0x4b8870ff, 0x70e946d1, 0x4b74baa0),
- 	PCMCIA_DEVICE_NULL
- };
- MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
- 
- 
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/htcuni-acx.patch b/packages/kexecboot/linux-kexecboot-2.6.24/htcuni-acx.patch
deleted file mode 100644
index 1ccebddc8d..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/htcuni-acx.patch
+++ /dev/null
@@ -1,33527 +0,0 @@
----
- drivers/net/wireless/Kconfig                |   31 
- drivers/net/wireless/Makefile               |    2 
- drivers/net/wireless/acx/Kconfig            |  113 
- drivers/net/wireless/acx/Makefile           |   21 
- drivers/net/wireless/acx/acx.h              |   14 
- drivers/net/wireless/acx/acx_config.h       |   50 
- drivers/net/wireless/acx/acx_func.h         |  710 ++
- drivers/net/wireless/acx/acx_hw.h           |   18 
- drivers/net/wireless/acx/acx_struct.h       | 2114 ++++++++
- drivers/net/wireless/acx/common.c           | 7388 ++++++++++++++++++++++++++++
- drivers/net/wireless/acx/conv.c             |  504 +
- drivers/net/wireless/acx/cs.c               | 5703 +++++++++++++++++++++
- drivers/net/wireless/acx/htcsable_acx.c     |  118 
- drivers/net/wireless/acx/htcuniversal_acx.c |  108 
- drivers/net/wireless/acx/hx4700_acx.c       |  108 
- drivers/net/wireless/acx/ioctl.c            | 2748 ++++++++++
- drivers/net/wireless/acx/mem.c              | 5363 ++++++++++++++++++++
- drivers/net/wireless/acx/pci.c              | 4234 ++++++++++++++++
- drivers/net/wireless/acx/rx3000_acx.c       |  110 
- drivers/net/wireless/acx/setrate.c          |  213 
- drivers/net/wireless/acx/usb.c              | 1922 +++++++
- drivers/net/wireless/acx/wlan.c             |  424 +
- drivers/net/wireless/acx/wlan_compat.h      |  260 
- drivers/net/wireless/acx/wlan_hdr.h         |  497 +
- drivers/net/wireless/acx/wlan_mgmt.h        |  582 ++
- 25 files changed, 33355 insertions(+)
-
-Index: linux-2.6.23/drivers/net/wireless/acx/acx_config.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx_config.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,50 @@
-+#define ACX_RELEASE "v0.3.36"
-+
-+/*
-+ * Test out all the channels in reg domain 0x10
-+ */
-+#define ACX_ALLOW_ALLCHANNELS
-+
-+/* set to 0 if you don't want any debugging code to be compiled in */
-+/* set to 1 if you want some debugging */
-+/* set to 2 if you want extensive debug log */
-+#define ACX_DEBUG 0
-+
-+/*
-+ * Since we'll be changing channels a lot
-+#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT)
-+*/
-+#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT)
-+
-+/* assume 32bit I/O width
-+ * (16bit is also compatible with Compact Flash) */
-+#define ACX_IO_WIDTH 32
-+
-+/* Set this to 1 if you want monitor mode to use
-+ * phy header. Currently it is not useful anyway since we
-+ * don't know what useful info (if any) is in phy header.
-+ * If you want faster/smaller code, say 0 here */
-+#define WANT_PHY_HDR 0
-+
-+/* whether to do Tx descriptor cleanup in softirq (i.e. not in IRQ
-+ * handler) or not. Note that doing it later does slightly increase
-+ * system load, so still do that stuff in the IRQ handler for now,
-+ * even if that probably means worse latency */
-+#define TX_CLEANUP_IN_SOFTIRQ 0
-+
-+/* if you want very experimental 802.11 power save mode features */
-+#define POWER_SAVE_80211 0
-+
-+/* if you want very early packet fragmentation bits and pieces */
-+#define ACX_FRAGMENTATION 0
-+
-+/* Locking: */
-+/* very talkative */
-+/* #define PARANOID_LOCKING 1 */
-+/* normal (use when bug-free) */
-+#define DO_LOCKING 1
-+/* else locking is disabled! */
-+
-+/* 0 - normal mode */
-+/* 1 - development/debug: probe for IEs on modprobe */
-+#define CMD_DISCOVERY 0
-Index: linux-2.6.23/drivers/net/wireless/acx/acx_func.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx_func.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,710 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+
-+/***********************************************************************
-+** LOGGING
-+**
-+** - Avoid SHOUTING needlessly. Avoid excessive verbosity.
-+**   Gradually remove messages which are old debugging aids.
-+**
-+** - Use printk() for messages which are to be always logged.
-+**   Supply either 'acx:' or '<devname>:' prefix so that user
-+**   can figure out who's speaking among other kernel chatter.
-+**   acx: is for general issues (e.g. "acx: no firmware image!")
-+**   while <devname>: is related to a particular device
-+**   (think about multi-card setup). Double check that message
-+**   is not confusing to the average user.
-+**
-+** - use printk KERN_xxx level only if message is not a WARNING
-+**   but is INFO, ERR etc.
-+**
-+** - Use printk_ratelimited() for messages which may flood
-+**   (e.g. "rx DUP pkt!").
-+**
-+** - Use log() for messages which may be omitted (and they
-+**   _will_ be omitted in non-debug builds). Note that
-+**   message levels may be disabled at compile-time selectively,
-+**   thus select them wisely. Example: L_DEBUG is the lowest
-+**   (most likely to be compiled out) -> use for less important stuff.
-+**
-+** - Do not print important stuff with log(), or else people
-+**   will never build non-debug driver.
-+**
-+** Style:
-+** hex: capital letters, zero filled (e.g. 0x02AC)
-+** str: dont start from capitals, no trailing periods ("tx: queue is stopped")
-+*/
-+#if ACX_DEBUG > 1
-+
-+void log_fn_enter(const char *funcname);
-+void log_fn_exit(const char *funcname);
-+void log_fn_exit_v(const char *funcname, int v);
-+
-+#define FN_ENTER \
-+	do { \
-+		if (unlikely(acx_debug & L_FUNC)) { \
-+			log_fn_enter(__func__); \
-+		} \
-+	} while (0)
-+
-+#define FN_EXIT1(v) \
-+	do { \
-+		if (unlikely(acx_debug & L_FUNC)) { \
-+			log_fn_exit_v(__func__, v); \
-+		} \
-+	} while (0)
-+#define FN_EXIT0 \
-+	do { \
-+		if (unlikely(acx_debug & L_FUNC)) { \
-+			log_fn_exit(__func__); \
-+		} \
-+	} while (0)
-+
-+#else
-+
-+#define FN_ENTER
-+#define FN_EXIT1(v)
-+#define FN_EXIT0
-+
-+#endif /* ACX_DEBUG > 1 */
-+
-+
-+#if ACX_DEBUG
-+
-+#define log(chan, args...) \
-+	do { \
-+		if (acx_debug & (chan)) \
-+			printk(KERN_DEBUG args); \
-+	} while (0)
-+#define printk_ratelimited(args...) printk(args)
-+
-+#else /* Non-debug build: */
-+
-+#define log(chan, args...)
-+/* Standard way of log flood prevention */
-+#define printk_ratelimited(args...) \
-+do { \
-+	if (printk_ratelimit()) \
-+		printk(args); \
-+} while (0)
-+
-+#endif /* ACX_DEBUG */
-+
-+void acx_print_mac(const char *head, const u8 *mac, const char *tail);
-+
-+/* Optimized out to nothing in non-debug build */
-+static inline void
-+acxlog_mac(int level, const char *head, const u8 *mac, const char *tail)
-+{
-+	if (acx_debug & level) {
-+		acx_print_mac(head, mac, tail);
-+	}
-+}
-+
-+
-+/***********************************************************************
-+** MAC address helpers
-+*/
-+static inline void
-+MAC_COPY(u8 *mac, const u8 *src)
-+{
-+	*(u32*)mac = *(u32*)src;
-+	((u16*)mac)[2] = ((u16*)src)[2];
-+	/* kernel's memcpy will do the same: memcpy(dst, src, ETH_ALEN); */
-+}
-+
-+static inline void
-+MAC_FILL(u8 *mac, u8 val)
-+{
-+	memset(mac, val, ETH_ALEN);
-+}
-+
-+static inline void
-+MAC_BCAST(u8 *mac)
-+{
-+	((u16*)mac)[2] = *(u32*)mac = -1;
-+}
-+
-+static inline void
-+MAC_ZERO(u8 *mac)
-+{
-+	((u16*)mac)[2] = *(u32*)mac = 0;
-+}
-+
-+static inline int
-+mac_is_equal(const u8 *a, const u8 *b)
-+{
-+	/* can't beat this */
-+	return memcmp(a, b, ETH_ALEN) == 0;
-+}
-+
-+static inline int
-+mac_is_bcast(const u8 *mac)
-+{
-+	/* AND together 4 first bytes with sign-extended 2 last bytes
-+	** Only bcast address gives 0xffffffff. +1 gives 0 */
-+	return ( *(s32*)mac & ((s16*)mac)[2] ) + 1 == 0;
-+}
-+
-+static inline int
-+mac_is_zero(const u8 *mac)
-+{
-+	return ( *(u32*)mac | ((u16*)mac)[2] ) == 0;
-+}
-+
-+static inline int
-+mac_is_directed(const u8 *mac)
-+{
-+	return (mac[0] & 1)==0;
-+}
-+
-+static inline int
-+mac_is_mcast(const u8 *mac)
-+{
-+	return (mac[0] & 1) && !mac_is_bcast(mac);
-+}
-+
-+#define MACSTR "%02X:%02X:%02X:%02X:%02X:%02X"
-+#define MAC(bytevector) \
-+	((unsigned char *)bytevector)[0], \
-+	((unsigned char *)bytevector)[1], \
-+	((unsigned char *)bytevector)[2], \
-+	((unsigned char *)bytevector)[3], \
-+	((unsigned char *)bytevector)[4], \
-+	((unsigned char *)bytevector)[5]
-+
-+
-+/***********************************************************************
-+** Random helpers
-+*/
-+#define TO_STRING(x)	#x
-+#define STRING(x)	TO_STRING(x)
-+
-+#define CLEAR_BIT(val, mask) ((val) &= ~(mask))
-+#define SET_BIT(val, mask) ((val) |= (mask))
-+
-+/* undefined if v==0 */
-+static inline unsigned int
-+lowest_bit(u16 v)
-+{
-+	unsigned int n = 0;
-+	while (!(v & 0xf)) { v>>=4; n+=4; }
-+	while (!(v & 1)) { v>>=1; n++; }
-+	return n;
-+}
-+
-+/* undefined if v==0 */
-+static inline unsigned int
-+highest_bit(u16 v)
-+{
-+	unsigned int n = 0;
-+	while (v>0xf) { v>>=4; n+=4; }
-+	while (v>1) { v>>=1; n++; }
-+	return n;
-+}
-+
-+/* undefined if v==0 */
-+static inline int
-+has_only_one_bit(u16 v)
-+{
-+	return ((v-1) ^ v) >= v;
-+}
-+
-+
-+static inline int
-+is_hidden_essid(char *essid)
-+{
-+	return (('\0' == essid[0]) ||
-+		((' ' == essid[0]) && ('\0' == essid[1])));
-+}
-+
-+/***********************************************************************
-+** LOCKING
-+** We have adev->sem and adev->lock.
-+**
-+** We employ following naming convention in order to get locking right:
-+**
-+** acx_e_xxxx - external entry points called from process context.
-+**	It is okay to sleep. adev->sem is to be taken on entry.
-+** acx_i_xxxx - external entry points possibly called from atomic context.
-+**	Sleeping is not allowed (and thus down(sem) is not legal!)
-+** acx_s_xxxx - potentially sleeping functions. Do not ever call under lock!
-+** acx_l_xxxx - functions which expect lock to be already taken.
-+** rest       - non-sleeping functions which do not require locking
-+**		but may be run under lock
-+**
-+** A small number of local helpers do not have acx_[eisl]_ prefix.
-+** They are always close to caller and are to be reviewed locally.
-+**
-+** Theory of operation:
-+**
-+** All process-context entry points (_e_ functions) take sem
-+** immediately. IRQ handler and other 'atomic-context' entry points
-+** (_i_ functions) take lock immediately on entry, but dont take sem
-+** because that might sleep.
-+**
-+** Thus *all* code is either protected by sem or lock, or both.
-+**
-+** Code which must not run concurrently with IRQ takes lock.
-+** Such code is marked with _l_.
-+**
-+** This results in the following rules of thumb useful in code review:
-+**
-+** + If a function calls _s_ fn, it must be an _s_ itself.
-+** + You can call _l_ fn only (a) from another _l_ fn
-+**   or (b) from _s_, _e_ or _i_ fn by taking lock, calling _l_,
-+**   and dropping lock.
-+** + All IRQ code runs under lock.
-+** + Any _s_ fn is running under sem.
-+** + Code under sem can race only with IRQ code.
-+** + Code under sem+lock cannot race with anything.
-+*/
-+
-+/* These functions *must* be inline or they will break horribly on SPARC, due
-+ * to its weird semantics for save/restore flags */
-+
-+#if defined(PARANOID_LOCKING) /* Lock debugging */
-+
-+void acx_lock_debug(acx_device_t *adev, const char* where);
-+void acx_unlock_debug(acx_device_t *adev, const char* where);
-+void acx_down_debug(acx_device_t *adev, const char* where);
-+void acx_up_debug(acx_device_t *adev, const char* where);
-+void acx_lock_unhold(void);
-+void acx_sem_unhold(void);
-+
-+static inline void
-+acx_lock_helper(acx_device_t *adev, unsigned long *fp, const char* where)
-+{
-+	acx_lock_debug(adev, where);
-+	spin_lock_irqsave(&adev->lock, *fp);
-+}
-+static inline void
-+acx_unlock_helper(acx_device_t *adev, unsigned long *fp, const char* where)
-+{
-+	acx_unlock_debug(adev, where);
-+	spin_unlock_irqrestore(&adev->lock, *fp);
-+}
-+static inline void
-+acx_down_helper(acx_device_t *adev, const char* where)
-+{
-+	acx_down_debug(adev, where);
-+}
-+static inline void
-+acx_up_helper(acx_device_t *adev, const char* where)
-+{
-+	acx_up_debug(adev, where);
-+}
-+#define acx_lock(adev, flags)	acx_lock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__))
-+#define acx_unlock(adev, flags)	acx_unlock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__))
-+#define acx_sem_lock(adev)	acx_down_helper(adev, __FILE__ ":" STRING(__LINE__))
-+#define acx_sem_unlock(adev)	acx_up_helper(adev, __FILE__ ":" STRING(__LINE__))
-+
-+#elif defined(DO_LOCKING)
-+
-+#define acx_lock(adev, flags)	spin_lock_irqsave(&adev->lock, flags)
-+#define acx_unlock(adev, flags)	spin_unlock_irqrestore(&adev->lock, flags)
-+#define acx_sem_lock(adev)	down(&adev->sem)
-+#define acx_sem_unlock(adev)	up(&adev->sem)
-+#define acx_lock_unhold()	((void)0)
-+#define acx_sem_unhold()	((void)0)
-+
-+#else /* no locking! :( */
-+
-+#define acx_lock(adev, flags)	((void)0)
-+#define acx_unlock(adev, flags)	((void)0)
-+#define acx_sem_lock(adev)	((void)0)
-+#define acx_sem_unlock(adev)	((void)0)
-+#define acx_lock_unhold()	((void)0)
-+#define acx_sem_unhold()	((void)0)
-+
-+#endif
-+
-+
-+/***********************************************************************
-+*/
-+
-+/* Can race with rx path (which is not protected by sem):
-+** rx -> process_[re]assocresp() -> set_status(ASSOCIATED) -> wake_queue()
-+** Can race with tx_complete IRQ:
-+** IRQ -> acxpci_l_clean_txdesc -> acx_wake_queue
-+** Review carefully all callsites */
-+static inline void
-+acx_stop_queue(struct net_device *ndev, const char *msg)
-+{
-+	if (netif_queue_stopped(ndev))
-+		return;
-+
-+	netif_stop_queue(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: stop queue %s\n", msg);
-+}
-+
-+static inline int
-+acx_queue_stopped(struct net_device *ndev)
-+{
-+	return netif_queue_stopped(ndev);
-+}
-+
-+/*
-+static inline void
-+acx_start_queue(struct net_device *ndev, const char *msg)
-+{
-+	netif_start_queue(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: start queue %s\n", msg);
-+}
-+*/
-+
-+static inline void
-+acx_wake_queue(struct net_device *ndev, const char *msg)
-+{
-+	netif_wake_queue(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: wake queue %s\n", msg);
-+}
-+
-+static inline void
-+acx_carrier_off(struct net_device *ndev, const char *msg)
-+{
-+	netif_carrier_off(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: carrier off %s\n", msg);
-+}
-+
-+static inline void
-+acx_carrier_on(struct net_device *ndev, const char *msg)
-+{
-+	netif_carrier_on(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: carrier on %s\n", msg);
-+}
-+
-+/* This function does not need locking UNLESS you call it
-+** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can
-+** wake queue. This can race with stop_queue elsewhere. */
-+void acx_set_status(acx_device_t *adev, u16 status);
-+
-+
-+/***********************************************************************
-+** Communication with firmware
-+*/
-+#define CMD_TIMEOUT_MS(n)	(n)
-+#define ACX_CMD_TIMEOUT_DEFAULT	CMD_TIMEOUT_MS(50)
-+
-+#if ACX_DEBUG
-+
-+/* We want to log cmd names */
-+int acxpci_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr);
-+int acxmem_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr);
-+int acxusb_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr);
-+static inline int
-+acx_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr)
-+{
-+        if (IS_MEM(adev))
-+                return acxmem_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr);
-+	if (IS_PCI(adev))
-+		return acxpci_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr);
-+	return acxusb_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr);
-+}
-+#define acx_s_issue_cmd(adev,cmd,param,len) \
-+	acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,ACX_CMD_TIMEOUT_DEFAULT,#cmd)
-+#define acx_s_issue_cmd_timeo(adev,cmd,param,len,timeo) \
-+	acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,timeo,#cmd)
-+int acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* str);
-+#define acx_s_configure(adev,pdr,type) \
-+	acx_s_configure_debug(adev,pdr,type,#type)
-+int acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type, const char* str);
-+#define acx_s_interrogate(adev,pdr,type) \
-+	acx_s_interrogate_debug(adev,pdr,type,#type)
-+
-+#else
-+
-+int acxpci_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout);
-+int acxmem_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout);
-+int acxusb_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout);
-+static inline int
-+acx_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd,	void *param, unsigned len, unsigned timeout)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, timeout);
-+	if (IS_PCI(adev))
-+		return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, timeout);
-+	return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, timeout);
-+}
-+static inline int
-+acx_s_issue_cmd(acx_device_t *adev, unsigned cmd, void *param, unsigned len)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT);
-+	if (IS_PCI(adev))
-+		return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT);
-+	return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT);
-+}
-+int acx_s_configure(acx_device_t *adev, void *pdr, int type);
-+int acx_s_interrogate(acx_device_t *adev, void *pdr, int type);
-+
-+#endif
-+
-+void acx_s_cmd_start_scan(acx_device_t *adev);
-+
-+
-+/***********************************************************************
-+** Ioctls
-+*/
-+int
-+acx111pci_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra);
-+int
-+acx100pci_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra);
-+int
-+acx100mem_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra);
-+
-+
-+/***********************************************************************
-+** /proc
-+*/
-+#ifdef CONFIG_PROC_FS
-+int acx_proc_register_entries(const struct net_device *ndev);
-+int acx_proc_unregister_entries(const struct net_device *ndev);
-+#else
-+static inline int
-+acx_proc_register_entries(const struct net_device *ndev) { return OK; }
-+static inline int
-+acx_proc_unregister_entries(const struct net_device *ndev) { return OK; }
-+#endif
-+
-+
-+/***********************************************************************
-+*/
-+firmware_image_t *acx_s_read_fw(struct device *dev, const char *file, u32 *size);
-+int acxpci_s_upload_radio(acx_device_t *adev);
-+int acxmem_s_upload_radio(acx_device_t *adev);
-+
-+
-+/***********************************************************************
-+** Unsorted yet :)
-+*/
-+int acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf);
-+int acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf);
-+int acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf);
-+static inline int
-+acx_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_s_read_phy_reg(adev, reg, charbuf);
-+	if (IS_PCI(adev))
-+		return acxpci_s_read_phy_reg(adev, reg, charbuf);
-+	return acxusb_s_read_phy_reg(adev, reg, charbuf);
-+}
-+
-+int acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value);
-+int acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value);
-+int acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value);
-+static inline int
-+acx_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_s_write_phy_reg(adev, reg, value);
-+	if (IS_PCI(adev))
-+		return acxpci_s_write_phy_reg(adev, reg, value);
-+	return acxusb_s_write_phy_reg(adev, reg, value);
-+}
-+
-+tx_t* acxpci_l_alloc_tx(acx_device_t *adev);
-+tx_t* acxmem_l_alloc_tx(acx_device_t *adev);
-+tx_t* acxusb_l_alloc_tx(acx_device_t *adev);
-+static inline tx_t*
-+acx_l_alloc_tx(acx_device_t *adev)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_l_alloc_tx(adev);
-+	if (IS_PCI(adev))
-+		return acxpci_l_alloc_tx(adev);
-+	return acxusb_l_alloc_tx(adev);
-+}
-+
-+void acxusb_l_dealloc_tx(tx_t *tx_opaque);
-+void acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque);
-+static inline void
-+acx_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque)
-+{
-+#ifdef ACX_MEM
-+  acxmem_l_dealloc_tx (adev, tx_opaque);
-+#else
-+	if (IS_USB(adev))
-+		acxusb_l_dealloc_tx(tx_opaque);
-+#endif
-+}
-+
-+void* acxpci_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque);
-+void* acxmem_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque);
-+void* acxusb_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque);
-+static inline void*
-+acx_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque)
-+{
-+#if defined (ACX_MEM)
-+		return acxmem_l_get_txbuf(adev, tx_opaque);
-+#else
-+	if (IS_PCI(adev))
-+		return acxpci_l_get_txbuf(adev, tx_opaque);
-+	return acxusb_l_get_txbuf(adev, tx_opaque);
-+#endif
-+}
-+
-+void acxpci_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len);
-+void acxmem_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len);
-+void acxusb_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len);
-+static inline void
-+acx_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len)
-+{
-+#if defined (ACX_MEM)
-+		acxmem_l_tx_data(adev, tx_opaque, len);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_l_tx_data(adev, tx_opaque, len);
-+	else
-+		acxusb_l_tx_data(adev, tx_opaque, len);
-+#endif
-+}
-+
-+static inline wlan_hdr_t*
-+acx_get_wlan_hdr(acx_device_t *adev, const rxbuffer_t *rxbuf)
-+{
-+	return (wlan_hdr_t*)((u8*)&rxbuf->hdr_a3 + adev->phy_header_len);
-+}
-+
-+void acxpci_l_power_led(acx_device_t *adev, int enable);
-+int acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf);
-+unsigned int acxpci_l_clean_txdesc(acx_device_t *adev);
-+void acxpci_l_clean_txdesc_emergency(acx_device_t *adev);
-+int acxpci_s_create_hostdesc_queues(acx_device_t *adev);
-+void acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start);
-+void acxpci_free_desc_queues(acx_device_t *adev);
-+char* acxpci_s_proc_diag_output(char *p, acx_device_t *adev);
-+int acxpci_proc_eeprom_output(char *p, acx_device_t *adev);
-+void acxpci_set_interrupt_mask(acx_device_t *adev);
-+int acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm);
-+
-+void acxmem_l_power_led(acx_device_t *adev, int enable);
-+int acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf);
-+unsigned int acxmem_l_clean_txdesc(acx_device_t *adev);
-+void acxmem_l_clean_txdesc_emergency(acx_device_t *adev);
-+int acxmem_s_create_hostdesc_queues(acx_device_t *adev);
-+void acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start);
-+void acxmem_free_desc_queues(acx_device_t *adev);
-+char* acxmem_s_proc_diag_output(char *p, acx_device_t *adev);
-+int acxmem_proc_eeprom_output(char *p, acx_device_t *adev);
-+void acxmem_set_interrupt_mask(acx_device_t *adev);
-+int acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm);
-+
-+void acx_s_msleep(int ms);
-+int acx_s_init_mac(acx_device_t *adev);
-+void acx_set_reg_domain(acx_device_t *adev, unsigned char reg_dom_id);
-+void acx_set_timer(acx_device_t *adev, int timeout_us);
-+void acx_update_capabilities(acx_device_t *adev);
-+void acx_s_start(acx_device_t *adev);
-+
-+void acx_s_update_card_settings(acx_device_t *adev);
-+void acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg);
-+void acx_l_update_ratevector(acx_device_t *adev);
-+
-+void acx_init_task_scheduler(acx_device_t *adev);
-+void acx_schedule_task(acx_device_t *adev, unsigned int set_flag);
-+
-+int acx_e_ioctl_old(struct net_device *ndev, struct ifreq *ifr, int cmd);
-+
-+client_t *acx_l_sta_list_get(acx_device_t *adev, const u8 *address);
-+void acx_l_sta_list_del(acx_device_t *adev, client_t *clt);
-+
-+int acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt);
-+void acx_i_timer(unsigned long a);
-+int acx_s_complete_scan(acx_device_t *adev);
-+
-+struct sk_buff *acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf);
-+int acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb);
-+
-+u8 acx_signal_determine_quality(u8 signal, u8 noise);
-+
-+void acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf);
-+void acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc,
-+			u16 intended_rate, u8 rate100, u16 rate111, u8 error,
-+			int pkts_to_ignore);
-+
-+void acx_dump_bytes(const void *, int);
-+void acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr);
-+
-+u8 acx_rate111to100(u16);
-+
-+void acx_s_set_defaults(acx_device_t *adev);
-+
-+#if !ACX_DEBUG
-+static inline const char* acx_get_packet_type_string(u16 fc) { return ""; }
-+#else
-+const char* acx_get_packet_type_string(u16 fc);
-+#endif
-+const char* acx_cmd_status_str(unsigned int state);
-+
-+int acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev);
-+
-+void great_inquisitor(acx_device_t *adev);
-+
-+void acx_s_get_firmware_version(acx_device_t *adev);
-+void acx_display_hardware_details(acx_device_t *adev);
-+
-+int acx_e_change_mtu(struct net_device *ndev, int mtu);
-+struct net_device_stats* acx_e_get_stats(struct net_device *ndev);
-+struct iw_statistics* acx_e_get_wireless_stats(struct net_device *ndev);
-+
-+#ifdef ACX_MEM
-+int __init acxmem_e_init_module(void);
-+void __exit acxmem_e_cleanup_module(void);
-+void acxmem_e_release(struct device *dev);
-+#else
-+int __init acxpci_e_init_module(void);
-+int __init acxusb_e_init_module(void);
-+void __exit acxpci_e_cleanup_module(void);
-+void __exit acxusb_e_cleanup_module(void);
-+#endif
-+int __init acx_cs_init(void);
-+void __exit acx_cs_cleanup(void);
-Index: linux-2.6.23/drivers/net/wireless/acx/acx.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,14 @@
-+#if defined(CONFIG_ACX_MEM) && !defined(ACX_MEM)
-+#define ACX_MEM
-+#endif
-+
-+#if defined(CONFIG_ACX_CS) && !defined(ACX_MEM)
-+#define ACX_MEM
-+#endif
-+
-+#include "acx_config.h"
-+#include "wlan_compat.h"
-+#include "wlan_hdr.h"
-+#include "wlan_mgmt.h"
-+#include "acx_struct.h"
-+#include "acx_func.h"
-Index: linux-2.6.23/drivers/net/wireless/acx/acx_hw.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx_hw.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,18 @@
-+/*
-+ * Interface for ACX slave memory driver
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ *
-+ * GPL
-+ *
-+ */
-+
-+#ifndef _ACX_HW_H
-+#define _ACX_HW_H
-+
-+struct acx_hardware_data {
-+	int (*start_hw)( void );
-+	int (*stop_hw)( void );
-+};
-+
-+#endif /* _ACX_HW_H */
-Index: linux-2.6.23/drivers/net/wireless/acx/acx_struct.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx_struct.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,2114 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** Forward declarations of types
-+*/
-+typedef struct tx tx_t;
-+typedef struct acx_device acx_device_t;
-+typedef struct client client_t;
-+typedef struct rxdesc rxdesc_t;
-+typedef struct txdesc txdesc_t;
-+typedef struct rxhostdesc rxhostdesc_t;
-+typedef struct txhostdesc txhostdesc_t;
-+
-+
-+/***********************************************************************
-+** Debug / log functionality
-+*/
-+enum {
-+	L_LOCK		= (ACX_DEBUG>1)*0x0001,	/* locking debug log */
-+	L_INIT		= (ACX_DEBUG>0)*0x0002,	/* special card initialization logging */
-+	L_IRQ		= (ACX_DEBUG>0)*0x0004,	/* interrupt stuff */
-+	L_ASSOC		= (ACX_DEBUG>0)*0x0008,	/* assocation (network join) and station log */
-+	L_FUNC		= (ACX_DEBUG>1)*0x0020,	/* logging of function enter / leave */
-+	L_XFER		= (ACX_DEBUG>1)*0x0080,	/* logging of transfers and mgmt */
-+	L_DATA		= (ACX_DEBUG>1)*0x0100,	/* logging of transfer data */
-+	L_DEBUG		= (ACX_DEBUG>1)*0x0200,	/* log of debug info */
-+	L_IOCTL		= (ACX_DEBUG>0)*0x0400,	/* log ioctl calls */
-+	L_CTL		= (ACX_DEBUG>1)*0x0800,	/* log of low-level ctl commands */
-+	L_BUFR		= (ACX_DEBUG>1)*0x1000,	/* debug rx buffer mgmt (ring buffer etc.) */
-+	L_XFER_BEACON	= (ACX_DEBUG>1)*0x2000,	/* also log beacon packets */
-+	L_BUFT		= (ACX_DEBUG>1)*0x4000,	/* debug tx buffer mgmt (ring buffer etc.) */
-+	L_USBRXTX	= (ACX_DEBUG>0)*0x8000,	/* debug USB rx/tx operations */
-+	L_BUF		= L_BUFR + L_BUFT,
-+	L_ANY		= 0xffff
-+};
-+
-+#if ACX_DEBUG
-+extern unsigned int acx_debug;
-+#else
-+enum { acx_debug = 0 };
-+#endif
-+
-+
-+/***********************************************************************
-+** Random helpers
-+*/
-+#define ACX_PACKED __attribute__ ((packed))
-+
-+#define VEC_SIZE(a) (sizeof(a)/sizeof(a[0]))
-+
-+/* Use worker_queues for 2.5/2.6 kernels and queue tasks for 2.4 kernels
-+   (used for the 'bottom half' of the interrupt routine) */
-+
-+#include <linux/workqueue.h>
-+#define USE_WORKER_TASKS
-+#define WORK_STRUCT struct work_struct
-+#define SCHEDULE_WORK schedule_work
-+#define FLUSH_SCHEDULED_WORK flush_scheduled_work
-+
-+
-+/***********************************************************************
-+** Constants
-+*/
-+#define OK	0
-+#define NOT_OK	1
-+
-+/* The supported chip models */
-+#define CHIPTYPE_ACX100		1
-+#define CHIPTYPE_ACX111		2
-+
-+#define IS_ACX100(adev)	((adev)->chip_type == CHIPTYPE_ACX100)
-+#define IS_ACX111(adev)	((adev)->chip_type == CHIPTYPE_ACX111)
-+
-+/* Supported interfaces */
-+#define DEVTYPE_PCI		0
-+#define DEVTYPE_USB		1
-+#define DEVTYPE_MEM             2
-+
-+#if !defined(CONFIG_ACX_PCI) && !defined(CONFIG_ACX_USB) && !defined(CONFIG_ACX_MEM) && !defined(CONFIG_ACX_CS)
-+#error Driver must include PCI, USB, PCMCIA or memory mapped interface support. You selected none of them.
-+#endif
-+
-+#if defined(CONFIG_ACX_PCI)
-+ #if !defined(CONFIG_ACX_USB)
-+  #define IS_PCI(adev)	1
-+ #else
-+  #define IS_PCI(adev)	((adev)->dev_type == DEVTYPE_PCI)
-+ #endif
-+#else
-+ #define IS_PCI(adev)	0
-+#endif
-+
-+#if defined(CONFIG_ACX_USB)
-+ #if !defined(CONFIG_ACX_PCI)
-+  #define IS_USB(adev)	1
-+ #else
-+  #define IS_USB(adev)	((adev)->dev_type == DEVTYPE_USB)
-+ #endif
-+#else
-+ #define IS_USB(adev)	0
-+#endif
-+
-+#if defined(CONFIG_ACX_MEM) || defined(CONFIG_ACX_CS)
-+ #define IS_MEM(adev)  1
-+#else
-+ #define IS_MEM(adev)   0
-+#endif
-+
-+/* Driver defaults */
-+#define DEFAULT_DTIM_INTERVAL	10
-+/* used to be 2048, but FreeBSD driver changed it to 4096 to work properly
-+** in noisy wlans */
-+#define DEFAULT_MSDU_LIFETIME	4096
-+#define DEFAULT_RTS_THRESHOLD	2312	/* max. size: disable RTS mechanism */
-+#define DEFAULT_BEACON_INTERVAL	100
-+
-+#define ACX100_BAP_DATALEN_MAX		4096
-+#define ACX100_RID_GUESSING_MAXLEN	2048	/* I'm not really sure */
-+#define ACX100_RIDDATA_MAXLEN		ACX100_RID_GUESSING_MAXLEN
-+
-+/* Support Constants */
-+/* Radio type names, found in Win98 driver's TIACXLN.INF */
-+#define RADIO_MAXIM_0D		0x0d
-+#define RADIO_RFMD_11		0x11
-+#define RADIO_RALINK_15		0x15
-+/* used in ACX111 cards (WG311v2, WL-121, ...): */
-+#define RADIO_RADIA_16		0x16
-+/* most likely *sometimes* used in ACX111 cards: */
-+#define RADIO_UNKNOWN_17	0x17
-+/* FwRad19.bin was found in a Safecom driver; must be an ACX111 radio: */
-+#define RADIO_UNKNOWN_19	0x19
-+#define RADIO_UNKNOWN_1B	0x1b    /* radio in SafeCom SWLUT-54125 USB adapter; entirely unknown!! */
-+
-+/* Controller Commands */
-+/* can be found in table cmdTable in firmware "Rev. 1.5.0" (FW150) */
-+#define ACX1xx_CMD_RESET		0x00
-+#define ACX1xx_CMD_INTERROGATE		0x01
-+#define ACX1xx_CMD_CONFIGURE		0x02
-+#define ACX1xx_CMD_ENABLE_RX		0x03
-+#define ACX1xx_CMD_ENABLE_TX		0x04
-+#define ACX1xx_CMD_DISABLE_RX		0x05
-+#define ACX1xx_CMD_DISABLE_TX		0x06
-+#define ACX1xx_CMD_FLUSH_QUEUE		0x07
-+#define ACX1xx_CMD_SCAN			0x08
-+#define ACX1xx_CMD_STOP_SCAN		0x09
-+#define ACX1xx_CMD_CONFIG_TIM		0x0a
-+#define ACX1xx_CMD_JOIN			0x0b
-+#define ACX1xx_CMD_WEP_MGMT		0x0c
-+#ifdef OLD_FIRMWARE_VERSIONS
-+#define ACX100_CMD_HALT			0x0e	/* mapped to unknownCMD in FW150 */
-+#else
-+#define ACX1xx_CMD_MEM_READ		0x0d
-+#define ACX1xx_CMD_MEM_WRITE		0x0e
-+#endif
-+#define ACX1xx_CMD_SLEEP		0x0f
-+#define ACX1xx_CMD_WAKE			0x10
-+#define ACX1xx_CMD_UNKNOWN_11		0x11	/* mapped to unknownCMD in FW150 */
-+#define ACX100_CMD_INIT_MEMORY		0x12
-+#define ACX1FF_CMD_DISABLE_RADIO	0x12	/* new firmware? TNETW1450? */
-+#define ACX1xx_CMD_CONFIG_BEACON	0x13
-+#define ACX1xx_CMD_CONFIG_PROBE_RESPONSE	0x14
-+#define ACX1xx_CMD_CONFIG_NULL_DATA	0x15
-+#define ACX1xx_CMD_CONFIG_PROBE_REQUEST	0x16
-+#define ACX1xx_CMD_FCC_TEST		0x17
-+#define ACX1xx_CMD_RADIOINIT		0x18
-+#define ACX111_CMD_RADIOCALIB		0x19
-+#define ACX1FF_CMD_NOISE_HISTOGRAM	0x1c /* new firmware? TNETW1450? */
-+#define ACX1FF_CMD_RX_RESET		0x1d /* new firmware? TNETW1450? */
-+#define ACX1FF_CMD_LNA_CONTROL		0x20 /* new firmware? TNETW1450? */
-+#define ACX1FF_CMD_CONTROL_DBG_TRACE	0x21 /* new firmware? TNETW1450? */
-+
-+/* 'After Interrupt' Commands */
-+#define ACX_AFTER_IRQ_CMD_STOP_SCAN	0x01
-+#define ACX_AFTER_IRQ_CMD_ASSOCIATE	0x02
-+#define ACX_AFTER_IRQ_CMD_RADIO_RECALIB	0x04
-+#define ACX_AFTER_IRQ_UPDATE_CARD_CFG	0x08
-+#define ACX_AFTER_IRQ_TX_CLEANUP	0x10
-+#define ACX_AFTER_IRQ_COMPLETE_SCAN	0x20
-+#define ACX_AFTER_IRQ_RESTART_SCAN	0x40
-+
-+/***********************************************************************
-+** Tx/Rx buffer sizes and watermarks
-+**
-+** This will alloc and use DMAable buffers of
-+** WLAN_A4FR_MAXLEN_WEP_FCS * (RX_CNT + TX_CNT) bytes
-+** RX/TX_CNT=32 -> ~150k DMA buffers
-+** RX/TX_CNT=16 -> ~75k DMA buffers
-+**
-+** 2005-10-10: reduced memory usage by lowering both to 16
-+*/
-+#define RX_CNT 16
-+#define TX_CNT 16
-+
-+/* we clean up txdescs when we have N free txdesc: */
-+#define TX_CLEAN_BACKLOG (TX_CNT/4)
-+#define TX_START_CLEAN (TX_CNT - TX_CLEAN_BACKLOG)
-+#define TX_EMERG_CLEAN 2
-+/* we stop queue if we have < N free txbufs: */
-+#define TX_STOP_QUEUE 3
-+/* we start queue if we have >= N free txbufs: */
-+#define TX_START_QUEUE 5
-+
-+/***********************************************************************
-+** Interrogate/Configure cmd constants
-+**
-+** NB: length includes JUST the data part of the IE
-+** (does not include size of the (type,len) pair)
-+**
-+** TODO: seems that acx100, acx100usb, acx111 have some differences,
-+** fix code with regard to this!
-+*/
-+
-+#define DEF_IE(name, val, len) enum { ACX##name=val, ACX##name##_LEN=len }
-+
-+/* Information Elements: Network Parameters, Static Configuration Entities */
-+/* these are handled by real_cfgtable in firmware "Rev 1.5.0" (FW150) */
-+DEF_IE(1xx_IE_UNKNOWN_00		,0x0000, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(100_IE_ACX_TIMER			,0x0001, 0x10);
-+DEF_IE(1xx_IE_POWER_MGMT		,0x0002, 0x06); /* TNETW1450: length 0x18!! */
-+DEF_IE(1xx_IE_QUEUE_CONFIG		,0x0003, 0x1c);
-+DEF_IE(100_IE_BLOCK_SIZE		,0x0004, 0x02);
-+DEF_IE(1FF_IE_SLOT_TIME			,0x0004, 0x08); /* later firmware versions only? */
-+DEF_IE(1xx_IE_MEMORY_CONFIG_OPTIONS	,0x0005, 0x14);
-+DEF_IE(1FF_IE_QUEUE_HEAD		,0x0005, 0x14 /* FIXME: length? */);
-+DEF_IE(1xx_IE_RATE_FALLBACK		,0x0006, 0x01); /* TNETW1450: length 2 */
-+DEF_IE(100_IE_WEP_OPTIONS		,0x0007, 0x03);
-+DEF_IE(111_IE_RADIO_BAND		,0x0007, -1);
-+DEF_IE(1FF_IE_TIMING_CFG		,0x0007, -1);	/* later firmware versions; TNETW1450 only? */
-+DEF_IE(100_IE_SSID			,0x0008, 0x20); /* huh? */
-+DEF_IE(1xx_IE_MEMORY_MAP		,0x0008, 0x28); /* huh? TNETW1450 has length 0x40!! */
-+DEF_IE(1xx_IE_SCAN_STATUS		,0x0009, 0x04); /* mapped to cfgInvalid in FW150 */
-+DEF_IE(1xx_IE_ASSOC_ID			,0x000a, 0x02);
-+DEF_IE(1xx_IE_UNKNOWN_0B		,0x000b, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1FF_IE_TX_POWER_LEVEL_TABLE	,0x000b, 0x18); /* later firmware versions; TNETW1450 only? */
-+DEF_IE(100_IE_UNKNOWN_0C		,0x000c, -1);	/* very small implementation in FW150! */
-+/* ACX100 has an equivalent struct in the cmd mailbox directly after reset.
-+ * 0x14c seems extremely large, will trash stack on failure (memset!)
-+ * in case of small input struct --> OOPS! */
-+DEF_IE(111_IE_CONFIG_OPTIONS		,0x000c, 0x14c);
-+DEF_IE(1xx_IE_FWREV			,0x000d, 0x18);
-+DEF_IE(1xx_IE_FCS_ERROR_COUNT		,0x000e, 0x04);
-+DEF_IE(1xx_IE_MEDIUM_USAGE		,0x000f, 0x08);
-+DEF_IE(1xx_IE_RXCONFIG			,0x0010, 0x04);
-+DEF_IE(100_IE_UNKNOWN_11		,0x0011, -1);	/* NONBINARY: large implementation in FW150! link quality readings or so? */
-+DEF_IE(111_IE_QUEUE_THRESH		,0x0011, -1);
-+DEF_IE(100_IE_UNKNOWN_12		,0x0012, -1);	/* NONBINARY: VERY large implementation in FW150!! */
-+DEF_IE(111_IE_BSS_POWER_SAVE		,0x0012, /* -1 */ 2);
-+DEF_IE(1xx_IE_FIRMWARE_STATISTICS	,0x0013, 0x9c); /* TNETW1450: length 0x134!! */
-+DEF_IE(1FF_IE_RX_INTR_CONFIG		,0x0014, 0x14); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1xx_IE_FEATURE_CONFIG		,0x0015, 0x08);
-+DEF_IE(111_IE_KEY_CHOOSE		,0x0016, 0x04);	/* for rekeying. really len=4?? */
-+DEF_IE(1FF_IE_MISC_CONFIG_TABLE		,0x0017, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_WONE_CONFIG		,0x0018, -1);	/* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_TID_CONFIG		,0x001a, 0x2c); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_CALIB_ASSESSMENT		,0x001e, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_BEACON_FILTER_OPTIONS	,0x001f, 0x02); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_LOW_RSSI_THRESH_OPT	,0x0020, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_NOISE_HISTOGRAM_RESULTS	,0x0021, 0x30); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_PACKET_DETECT_THRESH	,0x0023, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_TX_CONFIG_OPTIONS		,0x0024, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_CCA_THRESHOLD		,0x0025, 0x02); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_EVENT_MASK		,0x0026, 0x08); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_DTIM_PERIOD		,0x0027, 0x02); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_ACI_CONFIG_SET		,0x0029, 0x06); /* later firmware versions; maybe TNETW1450 only? */
-+DEF_IE(1FF_IE_EEPROM_VER		,0x0030, 0x04); /* later firmware versions; maybe TNETW1450 only? */
-+DEF_IE(1xx_IE_DOT11_STATION_ID		,0x1001, 0x06);
-+DEF_IE(100_IE_DOT11_UNKNOWN_1002	,0x1002, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(111_IE_DOT11_FRAG_THRESH		,0x1002, -1);	/* mapped to cfgInvalid in FW150; TNETW1450 has length 2!! */
-+DEF_IE(100_IE_DOT11_BEACON_PERIOD	,0x1003, 0x02);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1xx_IE_DOT11_DTIM_PERIOD		,0x1004, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1FF_IE_DOT11_MAX_RX_LIFETIME	,0x1004, -1);	/* later firmware versions; maybe TNETW1450 only? */
-+DEF_IE(1xx_IE_DOT11_SHORT_RETRY_LIMIT	,0x1005, 0x01); /* TNETW1450: length 2 */
-+DEF_IE(1xx_IE_DOT11_LONG_RETRY_LIMIT	,0x1006, 0x01); /* TNETW1450: length 2 */
-+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE	,0x1007, 0x20);	/* configure default keys; TNETW1450 has length 0x24!! */
-+DEF_IE(1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME	,0x1008, 0x04);
-+DEF_IE(1xx_IE_DOT11_GROUP_ADDR		,0x1009, -1);
-+DEF_IE(1xx_IE_DOT11_CURRENT_REG_DOMAIN	,0x100a, 0x02);
-+/* It's harmless to have larger struct. Use USB case always. */
-+DEF_IE(1xx_IE_DOT11_CURRENT_ANTENNA	,0x100b, 0x02);	/* in fact len=1 for PCI */
-+DEF_IE(1xx_IE_DOT11_UNKNOWN_100C	,0x100c, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1xx_IE_DOT11_TX_POWER_LEVEL	,0x100d, 0x01); /* TNETW1450 has length 2!! */
-+DEF_IE(1xx_IE_DOT11_CURRENT_CCA_MODE	,0x100e, 0x02);	/* in fact len=1 for PCI */
-+/* USB doesn't return anything - len==0?! */
-+DEF_IE(100_IE_DOT11_ED_THRESHOLD	,0x100f, 0x04);
-+DEF_IE(1xx_IE_DOT11_WEP_DEFAULT_KEY_SET	,0x1010, 0x01);	/* set default key ID; TNETW1450: length 2 */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1011	,0x1011, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1FF_IE_DOT11_CURR_5GHZ_REGDOM	,0x1011, -1);	/* later firmware versions; maybe TNETW1450 only? */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1012	,0x1012, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1013	,0x1013, -1);	/* mapped to cfgInvalid in FW150 */
-+
-+#if 0
-+/* Experimentally obtained on acx100, fw 1.9.8.b
-+** -1 means that fw returned 'invalid IE'
-+** 0200 FC00 nnnn... are test read contents: u16 type, u16 len, data
-+** (AA are poison bytes marking bytes not written by fw)
-+**
-+** Looks like acx100 fw does not update len field (thus len=256-4=FC here)
-+** A number of IEs seem to trash type,len fields
-+** IEs marked 'huge' return gobs of data (no poison bytes remain)
-+*/
-+DEF_IE(100_IE_INVAL_00,			0x0000, -1);
-+DEF_IE(100_IE_INVAL_01,			0x0001, -1);	/* IE_ACX_TIMER, len=16 on older fw */
-+DEF_IE(100_IE_POWER_MGMT,		0x0002, 4);	/* 0200FC00 00040000 AAAAAAAA */
-+DEF_IE(100_IE_QUEUE_CONFIG,		0x0003, 28);	/* 0300FC00 48060000 9CAD0000 0101AAAA DCB00000 E4B00000 9CAA0000 00AAAAAA */
-+DEF_IE(100_IE_BLOCK_SIZE,		0x0004, 2);	/* 0400FC00 0001AAAA AAAAAAAA AAAAAAAA */
-+/* write only: */
-+DEF_IE(100_IE_MEMORY_CONFIG_OPTIONS,	0x0005, 20);
-+DEF_IE(100_IE_RATE_FALLBACK,		0x0006, 1);	/* 0600FC00 00AAAAAA AAAAAAAA AAAAAAAA */
-+/* write only: */
-+DEF_IE(100_IE_WEP_OPTIONS,		0x0007, 3);
-+DEF_IE(100_IE_MEMORY_MAP,		0x0008, 40);	/* huge: 0800FC00 30000000 6CA20000 70A20000... */
-+/* gives INVAL on read: */
-+DEF_IE(100_IE_SCAN_STATUS,		0x0009, -1);
-+DEF_IE(100_IE_ASSOC_ID,			0x000a, 2);	/* huge: 0A00FC00 00000000 01040800 00000000... */
-+DEF_IE(100_IE_INVAL_0B,			0x000b, -1);
-+/* 'command rejected': */
-+DEF_IE(100_IE_CONFIG_OPTIONS,		0x000c, -3);
-+DEF_IE(100_IE_FWREV,			0x000d, 24);	/* 0D00FC00 52657620 312E392E 382E6200 AAAAAAAA AAAAAAAA 05050201 AAAAAAAA */
-+DEF_IE(100_IE_FCS_ERROR_COUNT,		0x000e, 4);
-+DEF_IE(100_IE_MEDIUM_USAGE,		0x000f, 8);	/* E41F0000 2D780300 FCC91300 AAAAAAAA */
-+DEF_IE(100_IE_RXCONFIG,			0x0010, 4);	/* 1000FC00 00280000 AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_QUEUE_THRESH,		0x0011, 12);	/* 1100FC00 AAAAAAAA 00000000 00000000 */
-+DEF_IE(100_IE_BSS_POWER_SAVE,		0x0012, 1);	/* 1200FC00 00AAAAAA AAAAAAAA AAAAAAAA */
-+/* read only, variable len */
-+DEF_IE(100_IE_FIRMWARE_STATISTICS,	0x0013, 256); /* 0000AC00 00000000 ... */
-+DEF_IE(100_IE_INT_CONFIG,		0x0014, 20);	/* 00000000 00000000 00000000 00000000 5D74D105 00000000 AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_FEATURE_CONFIG,		0x0015, 8);	/* 1500FC00 16000000 AAAAAAAA AAAAAAAA */
-+/* returns 'invalid MAC': */
-+DEF_IE(100_IE_KEY_CHOOSE,		0x0016, -4);
-+DEF_IE(100_IE_INVAL_17,			0x0017, -1);
-+DEF_IE(100_IE_UNKNOWN_18,		0x0018, 0);	/* null len?! 1800FC00 AAAAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_UNKNOWN_19,		0x0019, 256);	/* huge: 1900FC00 9C1F00EA FEFFFFEA FEFFFFEA... */
-+DEF_IE(100_IE_INVAL_1A,			0x001A, -1);
-+
-+DEF_IE(100_IE_DOT11_INVAL_1000,			0x1000, -1);
-+DEF_IE(100_IE_DOT11_STATION_ID,			0x1001, 6);	/* huge: 0110FC00 58B10E2F 03000000 00000000... */
-+DEF_IE(100_IE_DOT11_INVAL_1002,			0x1002, -1);
-+DEF_IE(100_IE_DOT11_INVAL_1003,			0x1003, -1);
-+DEF_IE(100_IE_DOT11_INVAL_1004,			0x1004, -1);
-+DEF_IE(100_IE_DOT11_SHORT_RETRY_LIMIT,		0x1005, 1);
-+DEF_IE(100_IE_DOT11_LONG_RETRY_LIMIT,		0x1006, 1);
-+/* write only: */
-+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE,	0x1007, 32);
-+DEF_IE(100_IE_DOT11_MAX_XMIT_MSDU_LIFETIME,	0x1008, 4);	/* huge: 0810FC00 00020000 F4010000 00000000... */
-+/* undoc but returns something */
-+DEF_IE(100_IE_DOT11_GROUP_ADDR,			0x1009, 12);	/* huge: 0910FC00 00000000 00000000 00000000... */
-+DEF_IE(100_IE_DOT11_CURRENT_REG_DOMAIN,		0x100a, 1);	/* 0A10FC00 30AAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_CURRENT_ANTENNA,		0x100b, 1);	/* 0B10FC00 8FAAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_INVAL_100C,			0x100c, -1);
-+DEF_IE(100_IE_DOT11_TX_POWER_LEVEL,		0x100d, 2);	/* 00000000 0100AAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_CURRENT_CCA_MODE,		0x100e, 1);	/* 0E10FC00 0DAAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_ED_THRESHOLD,		0x100f, 4);	/* 0F10FC00 70000000 AAAAAAAA AAAAAAAA */
-+/* set default key ID  */
-+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_SET,	0x1010, 1);	/* 1010FC00 00AAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_INVAL_1011,			0x1011, -1);
-+DEF_IE(100_IE_DOT11_INVAL_1012,			0x1012, -1);
-+DEF_IE(100_IE_DOT11_INVAL_1013,			0x1013, -1);
-+DEF_IE(100_IE_DOT11_UNKNOWN_1014,		0x1014, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1015,		0x1015, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1016,		0x1016, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1017,		0x1017, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1018,		0x1018, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1019,		0x1019, 256);	/* huge */
-+#endif
-+
-+#if 0
-+/* Experimentally obtained on PCI acx111 Xterasys XN-2522g, fw 1.2.1.34
-+** -1 means that fw returned 'invalid IE'
-+** 0400 0800 nnnn... are test read contents: u16 type, u16 len, data
-+** (AA are poison bytes marking bytes not written by fw)
-+**
-+** Looks like acx111 fw reports real len!
-+*/
-+DEF_IE(111_IE_INVAL_00,			0x0000, -1);
-+DEF_IE(111_IE_INVAL_01,			0x0001, -1);
-+DEF_IE(111_IE_POWER_MGMT,		0x0002, 12);
-+/* write only, variable len: 12 + rxqueue_cnt*8 + txqueue_cnt*4: */
-+DEF_IE(111_IE_MEMORY_CONFIG,		0x0003, 24);
-+DEF_IE(111_IE_BLOCK_SIZE,		0x0004, 8); /* 04000800 AA00AAAA AAAAAAAA */
-+/* variable len: 8 + rxqueue_cnt*8 + txqueue_cnt*8: */
-+DEF_IE(111_IE_QUEUE_HEAD,		0x0005, 24);
-+DEF_IE(111_IE_RATE_FALLBACK,		0x0006, 1);
-+/* acx100 name:WEP_OPTIONS */
-+/* said to have len:1 (not true, actually returns 12 bytes): */
-+DEF_IE(111_IE_RADIO_BAND,		0x0007, 12); /* 07000C00 AAAA1F00 FF03AAAA AAAAAAAA */
-+DEF_IE(111_IE_MEMORY_MAP,		0x0008, 48);
-+/* said to have len:4, but gives INVAL on read: */
-+DEF_IE(111_IE_SCAN_STATUS,		0x0009, -1);
-+DEF_IE(111_IE_ASSOC_ID,			0x000a, 2);
-+/* write only, len is not known: */
-+DEF_IE(111_IE_UNKNOWN_0B,		0x000b, 0);
-+/* read only, variable len. I see 67 byte reads: */
-+DEF_IE(111_IE_CONFIG_OPTIONS,		0x000c, 67); /* 0C004300 01160500 ... */
-+DEF_IE(111_IE_FWREV,			0x000d, 24);
-+DEF_IE(111_IE_FCS_ERROR_COUNT,		0x000e, 4);
-+DEF_IE(111_IE_MEDIUM_USAGE,		0x000f, 8);
-+DEF_IE(111_IE_RXCONFIG,			0x0010, 4);
-+DEF_IE(111_IE_QUEUE_THRESH,		0x0011, 12);
-+DEF_IE(111_IE_BSS_POWER_SAVE,		0x0012, 1);
-+/* read only, variable len. I see 240 byte reads: */
-+DEF_IE(111_IE_FIRMWARE_STATISTICS,	0x0013, 240); /* 1300F000 00000000 ... */
-+/* said to have len=17. looks like fw pads it to 20: */
-+DEF_IE(111_IE_INT_CONFIG,		0x0014, 20); /* 14001400 00000000 00000000 00000000 00000000 00000000 */
-+DEF_IE(111_IE_FEATURE_CONFIG,		0x0015, 8);
-+/* said to be name:KEY_INDICATOR, len:4, but gives INVAL on read: */
-+DEF_IE(111_IE_KEY_CHOOSE,		0x0016, -1);
-+/* said to have len:4, but in fact returns 8: */
-+DEF_IE(111_IE_MAX_USB_XFR,		0x0017, 8); /* 17000800 00014000 00000000 */
-+DEF_IE(111_IE_INVAL_18,			0x0018, -1);
-+DEF_IE(111_IE_INVAL_19,			0x0019, -1);
-+/* undoc but returns something: */
-+/* huh, fw indicates len=20 but uses 4 more bytes in buffer??? */
-+DEF_IE(111_IE_UNKNOWN_1A,		0x001A, 20); /* 1A001400 AA00AAAA 0000020F FF030000 00020000 00000007 04000000 */
-+
-+DEF_IE(111_IE_DOT11_INVAL_1000,			0x1000, -1);
-+DEF_IE(111_IE_DOT11_STATION_ID,			0x1001, 6);
-+DEF_IE(111_IE_DOT11_FRAG_THRESH,		0x1002, 2);
-+/* acx100 only? gives INVAL on read: */
-+DEF_IE(111_IE_DOT11_BEACON_PERIOD,		0x1003, -1);
-+/* said to be MAX_RECV_MSDU_LIFETIME: */
-+DEF_IE(111_IE_DOT11_DTIM_PERIOD,		0x1004, 4);
-+DEF_IE(111_IE_DOT11_SHORT_RETRY_LIMIT,		0x1005, 1);
-+DEF_IE(111_IE_DOT11_LONG_RETRY_LIMIT,		0x1006, 1);
-+/* acx100 only? gives INVAL on read: */
-+DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_WRITE,	0x1007, -1);
-+DEF_IE(111_IE_DOT11_MAX_XMIT_MSDU_LIFETIME,	0x1008, 4);
-+/* undoc but returns something. maybe it's 2 multicast MACs to listen to? */
-+DEF_IE(111_IE_DOT11_GROUP_ADDR,			0x1009, 12); /* 09100C00 00000000 00000000 00000000 */
-+DEF_IE(111_IE_DOT11_CURRENT_REG_DOMAIN,		0x100a, 1);
-+DEF_IE(111_IE_DOT11_CURRENT_ANTENNA,		0x100b, 2);
-+DEF_IE(111_IE_DOT11_INVAL_100C,			0x100c, -1);
-+DEF_IE(111_IE_DOT11_TX_POWER_LEVEL,		0x100d, 1);
-+/* said to have len=1 but gives INVAL on read: */
-+DEF_IE(111_IE_DOT11_CURRENT_CCA_MODE,		0x100e, -1);
-+/* said to have len=4 but gives INVAL on read: */
-+DEF_IE(111_IE_DOT11_ED_THRESHOLD,		0x100f, -1);
-+/* set default key ID. write only: */
-+DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_SET,	0x1010, 1);
-+/* undoc but returns something: */
-+DEF_IE(111_IE_DOT11_UNKNOWN_1011,		0x1011, 1); /* 11100100 20 */
-+DEF_IE(111_IE_DOT11_INVAL_1012,			0x1012, -1);
-+DEF_IE(111_IE_DOT11_INVAL_1013,			0x1013, -1);
-+#endif
-+
-+
-+/***********************************************************************
-+**Information Frames Structures
-+*/
-+
-+/* Used in beacon frames and the like */
-+#define DOT11RATEBYTE_1		(1*2)
-+#define DOT11RATEBYTE_2		(2*2)
-+#define DOT11RATEBYTE_5_5	(5*2+1)
-+#define DOT11RATEBYTE_11	(11*2)
-+#define DOT11RATEBYTE_22	(22*2)
-+#define DOT11RATEBYTE_6_G	(6*2)
-+#define DOT11RATEBYTE_9_G	(9*2)
-+#define DOT11RATEBYTE_12_G	(12*2)
-+#define DOT11RATEBYTE_18_G	(18*2)
-+#define DOT11RATEBYTE_24_G	(24*2)
-+#define DOT11RATEBYTE_36_G	(36*2)
-+#define DOT11RATEBYTE_48_G	(48*2)
-+#define DOT11RATEBYTE_54_G	(54*2)
-+#define DOT11RATEBYTE_BASIC	0x80	/* flags rates included in basic rate set */
-+
-+
-+/***********************************************************************
-+** rxbuffer_t
-+**
-+** This is the format of rx data returned by acx
-+*/
-+
-+/* I've hoped it's a 802.11 PHY header, but no...
-+ * so far, I've seen on acx111:
-+ * 0000 3a00 0000 0000 IBSS Beacons
-+ * 0000 3c00 0000 0000 ESS Beacons
-+ * 0000 2700 0000 0000 Probe requests
-+ * --vda
-+ */
-+typedef struct phy_hdr {
-+	u8	unknown[4];
-+	u8	acx111_unknown[4];
-+} ACX_PACKED phy_hdr_t;
-+
-+/* seems to be a bit similar to hfa384x_rx_frame.
-+ * These fields are still not quite obvious, though.
-+ * Some seem to have different meanings... */
-+
-+#define RXBUF_HDRSIZE 12
-+#define RXBUF_BYTES_RCVD(adev, rxbuf) \
-+		((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) - (adev)->phy_header_len)
-+#define RXBUF_BYTES_USED(rxbuf) \
-+		((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) + RXBUF_HDRSIZE)
-+/* USBism */
-+#define RXBUF_IS_TXSTAT(rxbuf) (le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0x8000)
-+/*
-+mac_cnt_rcvd:
-+    12 bits: length of frame from control field to first byte of FCS
-+    3 bits: reserved
-+    1 bit: 1 = it's a tx status info, not a rx packet (USB only)
-+
-+mac_cnt_mblks:
-+    6 bits: number of memory block used to store frame in adapter memory
-+    1 bit: Traffic Indicator bit in TIM of received Beacon was set
-+
-+mac_status: 1 byte (bitmap):
-+    7 Matching BSSID
-+    6 Matching SSID
-+    5 BDCST	Address 1 field is a broadcast
-+    4 VBM	received beacon frame has more than one set bit (?!)
-+    3 TIM Set	bit representing this station is set in TIM of received beacon
-+    2 GROUP	Address 1 is a multicast
-+    1 ADDR1	Address 1 matches our MAC
-+    0 FCSGD	FSC is good
-+
-+phy_stat_baseband: 1 byte (bitmap):
-+    7 Preamble		frame had a long preamble
-+    6 PLCP Error	CRC16 error in PLCP header
-+    5 Unsup_Mod		unsupported modulation
-+    4 Selected Antenna	antenna 1 was used to receive this frame
-+    3 PBCC/CCK		frame used: 1=PBCC, 0=CCK modulation
-+    2 OFDM		frame used OFDM modulation
-+    1 TI Protection	protection frame was detected
-+    0 Reserved
-+
-+phy_plcp_signal: 1 byte:
-+    Receive PLCP Signal field from the Baseband Processor
-+
-+phy_level: 1 byte:
-+    receive AGC gain level (can be used to measure receive signal strength)
-+
-+phy_snr: 1 byte:
-+    estimated noise power of equalized receive signal
-+    at input of FEC decoder (can be used to measure receive signal quality)
-+
-+time: 4 bytes:
-+    timestamp sampled from either the Access Manager TSF counter
-+    or free-running microsecond counter when the MAC receives
-+    first byte of PLCP header.
-+*/
-+
-+typedef struct rxbuffer {
-+	u16	mac_cnt_rcvd;		/* only 12 bits are len! (0xfff) */
-+	u8	mac_cnt_mblks;
-+	u8	mac_status;
-+	u8	phy_stat_baseband;	/* bit 0x80: used LNA (Low-Noise Amplifier) */
-+	u8	phy_plcp_signal;
-+	u8	phy_level;		/* PHY stat */
-+	u8	phy_snr;		/* PHY stat */
-+	u32	time;			/* timestamp upon MAC rcv first byte */
-+/* 4-byte (acx100) or 8-byte (acx111) phy header will be here
-+** if RX_CFG1_INCLUDE_PHY_HDR is in effect:
-+**	phy_hdr_t phy			*/
-+	wlan_hdr_a3_t hdr_a3;
-+	/* maximally sized data part of wlan packet */
-+	u8	data_a3[WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN];
-+	/* can add hdr/data_a4 if needed */
-+} ACX_PACKED rxbuffer_t;
-+
-+
-+/*--- Firmware statistics ----------------------------------------------------*/
-+
-+/* define a random 100 bytes more to catch firmware versions which
-+ * provide a bigger struct */
-+#define FW_STATS_FUTURE_EXTENSION	100
-+
-+typedef struct fw_stats_tx {
-+	u32	tx_desc_of;
-+} ACX_PACKED fw_stats_tx_t;
-+
-+typedef struct fw_stats_rx {
-+	u32	rx_oom;
-+	u32	rx_hdr_of;
-+	u32	rx_hw_stuck; /* old: u32	rx_hdr_use_next */
-+	u32	rx_dropped_frame;
-+	u32	rx_frame_ptr_err;
-+	u32	rx_xfr_hint_trig;
-+	u32	rx_aci_events; /* later versions only */
-+	u32	rx_aci_resets; /* later versions only */
-+} ACX_PACKED fw_stats_rx_t;
-+
-+typedef struct fw_stats_dma {
-+	u32	rx_dma_req;
-+	u32	rx_dma_err;
-+	u32	tx_dma_req;
-+	u32	tx_dma_err;
-+} ACX_PACKED fw_stats_dma_t;
-+
-+typedef struct fw_stats_irq {
-+	u32	cmd_cplt;
-+	u32	fiq;
-+	u32	rx_hdrs;
-+	u32	rx_cmplt;
-+	u32	rx_mem_of;
-+	u32	rx_rdys;
-+	u32	irqs;
-+	u32	tx_procs;
-+	u32	decrypt_done;
-+	u32	dma_0_done;
-+	u32	dma_1_done;
-+	u32	tx_exch_complet;
-+	u32	commands;
-+	u32	rx_procs;
-+	u32	hw_pm_mode_changes;
-+	u32	host_acks;
-+	u32	pci_pm;
-+	u32	acm_wakeups;
-+} ACX_PACKED fw_stats_irq_t;
-+
-+typedef struct fw_stats_wep {
-+	u32	wep_key_count;
-+	u32	wep_default_key_count;
-+	u32	dot11_def_key_mib;
-+	u32	wep_key_not_found;
-+	u32	wep_decrypt_fail;
-+	u32	wep_pkt_decrypt;
-+	u32	wep_decrypt_irqs;
-+} ACX_PACKED fw_stats_wep_t;
-+
-+typedef struct fw_stats_pwr {
-+	u32	tx_start_ctr;
-+	u32	no_ps_tx_too_short;
-+	u32	rx_start_ctr;
-+	u32	no_ps_rx_too_short;
-+	u32	lppd_started;
-+	u32	no_lppd_too_noisy;
-+	u32	no_lppd_too_short;
-+	u32	no_lppd_matching_frame;
-+} ACX_PACKED fw_stats_pwr_t;
-+
-+typedef struct fw_stats_mic {
-+	u32 mic_rx_pkts;
-+	u32 mic_calc_fail;
-+} ACX_PACKED fw_stats_mic_t;
-+
-+typedef struct fw_stats_aes {
-+	u32 aes_enc_fail;
-+	u32 aes_dec_fail;
-+	u32 aes_enc_pkts;
-+	u32 aes_dec_pkts;
-+	u32 aes_enc_irq;
-+	u32 aes_dec_irq;
-+} ACX_PACKED fw_stats_aes_t;
-+
-+typedef struct fw_stats_event {
-+	u32 heartbeat;
-+	u32 calibration;
-+	u32 rx_mismatch;
-+	u32 rx_mem_empty;
-+	u32 rx_pool;
-+	u32 oom_late;
-+	u32 phy_tx_err;
-+	u32 tx_stuck;
-+} ACX_PACKED fw_stats_event_t;
-+
-+/* mainly for size calculation only */
-+typedef struct fw_stats {
-+	u16			type;
-+	u16			len;
-+	fw_stats_tx_t		tx;
-+	fw_stats_rx_t		rx;
-+	fw_stats_dma_t		dma;
-+	fw_stats_irq_t		irq;
-+	fw_stats_wep_t		wep;
-+	fw_stats_pwr_t		pwr;
-+	fw_stats_mic_t		mic;
-+	fw_stats_aes_t		aes;
-+	fw_stats_event_t	evt;
-+	u8			_padding[FW_STATS_FUTURE_EXTENSION];
-+} fw_stats_t;
-+
-+/* Firmware version struct */
-+
-+typedef struct fw_ver {
-+	u16	cmd;
-+	u16	size;
-+	char	fw_id[20];
-+	u32	hw_id;
-+} ACX_PACKED fw_ver_t;
-+
-+#define FW_ID_SIZE 20
-+
-+typedef struct shared_queueindicator {
-+        u32     indicator;
-+        u16     host_lock;
-+        u16     fw_lock;
-+} ACX_PACKED queueindicator_t;
-+
-+/*--- WEP stuff --------------------------------------------------------------*/
-+#define DOT11_MAX_DEFAULT_WEP_KEYS	4
-+
-+/* non-firmware struct, no packing necessary */
-+typedef struct wep_key {
-+	size_t	size; /* most often used member first */
-+	u8	index;
-+	u8	key[29];
-+	u16	strange_filler;
-+} wep_key_t;			/* size = 264 bytes (33*8) */
-+/* FIXME: We don't have size 264! Or is there 2 bytes beyond the key
-+ * (strange_filler)? */
-+
-+/* non-firmware struct, no packing necessary */
-+typedef struct key_struct {
-+	u8	addr[ETH_ALEN];	/* 0x00 */
-+	u16	filler1;	/* 0x06 */
-+	u32	filler2;	/* 0x08 */
-+	u32	index;		/* 0x0c */
-+	u16	len;		/* 0x10 */
-+	u8	key[29];	/* 0x12; is this long enough??? */
-+} key_struct_t;			/* size = 276. FIXME: where is the remaining space?? */
-+
-+
-+/*--- Client (peer) info -----------------------------------------------------*/
-+/* adev->sta_list[] is used for:
-+** accumulating and processing of scan results
-+** keeping client info in AP mode
-+** keeping AP info in STA mode (AP is the only one 'client')
-+** keeping peer info in ad-hoc mode
-+** non-firmware struct --> no packing necessary */
-+enum {
-+	CLIENT_EMPTY_SLOT_0 = 0,
-+	CLIENT_EXIST_1 = 1,
-+	CLIENT_AUTHENTICATED_2 = 2,
-+	CLIENT_ASSOCIATED_3 = 3,
-+	CLIENT_JOIN_CANDIDATE = 4
-+};
-+struct client {
-+	/* most frequent access first */
-+	u8	used;			/* misnamed, more like 'status' */
-+	struct client*	next;
-+	unsigned long	mtime;		/* last time we heard it, in jiffies */
-+	size_t	essid_len;		/* length of ESSID (without '\0') */
-+	u32	sir;			/* Standard IR */
-+	u32	snr;			/* Signal to Noise Ratio */
-+	u16	aid;			/* association ID */
-+	u16	seq;			/* from client's auth req */
-+	u16	auth_alg;		/* from client's auth req */
-+	u16	cap_info;		/* from client's assoc req */
-+	u16	rate_cap;		/* what client supports (all rates) */
-+	u16	rate_bas;		/* what client supports (basic rates) */
-+	u16	rate_cfg;		/* what is allowed (by iwconfig etc) */
-+	u16	rate_cur;		/* currently used rate mask */
-+	u8	rate_100;		/* currently used rate byte (acx100 only) */
-+	u8	address[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];	/* ad-hoc hosts can have bssid != mac */
-+	u8	channel;
-+	u8	auth_step;
-+	u8	ignore_count;
-+	u8	fallback_count;
-+	u8	stepup_count;
-+	char	essid[IW_ESSID_MAX_SIZE + 1];	/* ESSID and trailing '\0'  */
-+/* FIXME: this one is too damn big */
-+	char	challenge_text[WLAN_CHALLENGE_LEN];
-+};
-+
-+
-+/***********************************************************************
-+** Hardware structures
-+*/
-+
-+/* An opaque typesafe helper type
-+ *
-+ * Some hardware fields are actually pointers,
-+ * but they have to remain u32, since using ptr instead
-+ * (8 bytes on 64bit systems!) would disrupt the fixed descriptor
-+ * format the acx firmware expects in the non-user area.
-+ * Since we cannot cram an 8 byte ptr into 4 bytes, we need to
-+ * enforce that pointed to data remains in low memory
-+ * (address value needs to fit in 4 bytes) on 64bit systems.
-+ *
-+ * This is easy to get wrong, thus we are using a small struct
-+ * and special macros to access it. Macros will check for
-+ * attempts to overflow an acx_ptr with value > 0xffffffff.
-+ *
-+ * Attempts to use acx_ptr without macros result in compile-time errors */
-+
-+typedef struct {
-+	u32	v;
-+} ACX_PACKED acx_ptr;
-+
-+#if ACX_DEBUG
-+#define CHECK32(n) BUG_ON(sizeof(n)>4 && (long)(n)>0xffffff00)
-+#else
-+#define CHECK32(n) ((void)0)
-+#endif
-+
-+/* acx_ptr <-> integer conversion */
-+#define cpu2acx(n) ({ CHECK32(n); ((acx_ptr){ .v = cpu_to_le32(n) }); })
-+#define acx2cpu(a) (le32_to_cpu(a.v))
-+
-+/* acx_ptr <-> pointer conversion */
-+#define ptr2acx(p) ({ CHECK32(p); ((acx_ptr){ .v = cpu_to_le32((u32)(long)(p)) }); })
-+#define acx2ptr(a) ((void*)le32_to_cpu(a.v))
-+
-+/* Values for rate field (acx100 only) */
-+#define RATE100_1		10
-+#define RATE100_2		20
-+#define RATE100_5		55
-+#define RATE100_11		110
-+#define RATE100_22		220
-+/* This bit denotes use of PBCC:
-+** (PBCC encoding is usable with 11 and 22 Mbps speeds only) */
-+#define RATE100_PBCC511		0x80
-+
-+/* Bit values for rate111 field */
-+#define RATE111_1		0x0001	/* DBPSK */
-+#define RATE111_2		0x0002	/* DQPSK */
-+#define RATE111_5		0x0004	/* CCK or PBCC */
-+#define RATE111_6		0x0008	/* CCK-OFDM or OFDM */
-+#define RATE111_9		0x0010	/* CCK-OFDM or OFDM */
-+#define RATE111_11		0x0020	/* CCK or PBCC */
-+#define RATE111_12		0x0040	/* CCK-OFDM or OFDM */
-+#define RATE111_18		0x0080	/* CCK-OFDM or OFDM */
-+#define RATE111_22		0x0100	/* PBCC */
-+#define RATE111_24		0x0200	/* CCK-OFDM or OFDM */
-+#define RATE111_36		0x0400	/* CCK-OFDM or OFDM */
-+#define RATE111_48		0x0800	/* CCK-OFDM or OFDM */
-+#define RATE111_54		0x1000	/* CCK-OFDM or OFDM */
-+#define RATE111_RESERVED	0x2000
-+#define RATE111_PBCC511		0x4000  /* PBCC mod at 5.5 or 11Mbit (else CCK) */
-+#define RATE111_SHORTPRE	0x8000  /* short preamble */
-+/* Special 'try everything' value */
-+#define RATE111_ALL		0x1fff
-+/* These bits denote acx100 compatible settings */
-+#define RATE111_ACX100_COMPAT	0x0127
-+/* These bits denote 802.11b compatible settings */
-+#define RATE111_80211B_COMPAT	0x0027
-+
-+/* Descriptor Ctl field bits
-+ * init value is 0x8e, "idle" value is 0x82 (in idle tx descs)
-+ */
-+#define DESC_CTL_SHORT_PREAMBLE	0x01	/* preamble type: 0 = long; 1 = short */
-+#define DESC_CTL_FIRSTFRAG	0x02	/* this is the 1st frag of the frame */
-+#define DESC_CTL_AUTODMA	0x04
-+#define DESC_CTL_RECLAIM	0x08	/* ready to reuse */
-+#define DESC_CTL_HOSTDONE	0x20	/* host has finished processing */
-+#define DESC_CTL_ACXDONE	0x40	/* acx has finished processing */
-+/* host owns the desc [has to be released last, AFTER modifying all other desc fields!] */
-+#define DESC_CTL_HOSTOWN	0x80
-+#define	DESC_CTL_ACXDONE_HOSTOWN (DESC_CTL_ACXDONE | DESC_CTL_HOSTOWN)
-+
-+/* Descriptor Status field
-+ */
-+#define	DESC_STATUS_FULL	(1 << 31)
-+
-+/* NB: some bits may be interesting for Monitor mode tx (aka Raw tx): */
-+#define DESC_CTL2_SEQ		0x01	/* don't increase sequence field */
-+#define DESC_CTL2_FCS		0x02	/* don't add the FCS */
-+#define DESC_CTL2_MORE_FRAG	0x04
-+#define DESC_CTL2_RETRY		0x08	/* don't increase retry field */
-+#define DESC_CTL2_POWER		0x10	/* don't increase power mgmt. field */
-+#define DESC_CTL2_RTS		0x20	/* do RTS/CTS magic before sending */
-+#define DESC_CTL2_WEP		0x40	/* encrypt this frame */
-+#define DESC_CTL2_DUR		0x80	/* don't increase duration field */
-+
-+/***********************************************************************
-+** PCI structures
-+*/
-+/* IRQ Constants
-+** (outside of "#ifdef PCI" because USB (mis)uses HOST_INT_SCAN_COMPLETE) */
-+#define HOST_INT_RX_DATA	0x0001
-+#define HOST_INT_TX_COMPLETE	0x0002
-+#define HOST_INT_TX_XFER	0x0004
-+#define HOST_INT_RX_COMPLETE	0x0008
-+#define HOST_INT_DTIM		0x0010
-+#define HOST_INT_BEACON		0x0020
-+#define HOST_INT_TIMER		0x0040
-+#define HOST_INT_KEY_NOT_FOUND	0x0080
-+#define HOST_INT_IV_ICV_FAILURE	0x0100
-+#define HOST_INT_CMD_COMPLETE	0x0200
-+#define HOST_INT_INFO		0x0400
-+#define HOST_INT_OVERFLOW	0x0800
-+#define HOST_INT_PROCESS_ERROR	0x1000
-+#define HOST_INT_SCAN_COMPLETE	0x2000
-+#define HOST_INT_FCS_THRESHOLD	0x4000
-+#define HOST_INT_UNKNOWN	0x8000
-+
-+/* Outside of "#ifdef PCI" because USB needs to know sizeof()
-+** of txdesc and rxdesc: */
-+struct txdesc {
-+	acx_ptr	pNextDesc;	/* pointer to next txdesc */
-+	acx_ptr	HostMemPtr;			/* 0x04 */
-+	acx_ptr	AcxMemPtr;			/* 0x08 */
-+	u32	tx_time;			/* 0x0c */
-+	u16	total_length;		/* 0x10 */
-+	u16	Reserved;			/* 0x12 */
-+
-+/* The following 16 bytes do not change when acx100 owns the descriptor */
-+/* BUG: fw clears last byte of this area which is supposedly reserved
-+** for driver use. amd64 blew up. We dare not use it now */
-+	u32	dummy[4];
-+
-+	u8	Ctl_8;			/* 0x24, 8bit value */
-+	u8	Ctl2_8;			/* 0x25, 8bit value */
-+	u8	error;			/* 0x26 */
-+	u8	ack_failures;		/* 0x27 */
-+
-+	union {
-+	  /*
-+	   * Packing doesn't work correctly on ARM unless unions are on
-+	   * 4 byte boundaries.
-+	   */
-+	        struct {
-+	                u8	rts_failures;		/* 0x28 */
-+	                u8	rts_ok;			/* 0x29 */
-+	                u16     d1;
-+	        } ACX_PACKED rts;
-+		struct {
-+	                u16     d1;
-+			u8	rate;	/* 0x2a */
-+			u8	queue_ctrl;	/* 0x2b */
-+		} ACX_PACKED r1;
-+		struct {
-+	                u16     d1;
-+			u16	rate111;	/* 0x2a */
-+		} ACX_PACKED r2;
-+	} ACX_PACKED u;
-+	u32	queue_info;			/* 0x2c (acx100, reserved on acx111) */
-+} ACX_PACKED;		/* size : 48 = 0x30 */
-+/* NB: acx111 txdesc structure is 4 byte larger */
-+/* All these 4 extra bytes are reserved. tx alloc code takes them into account */
-+
-+struct rxdesc {
-+	acx_ptr	pNextDesc;			/* 0x00 */
-+	acx_ptr	HostMemPtr;			/* 0x04 */
-+	acx_ptr	ACXMemPtr;			/* 0x08 */
-+	u32	rx_time;			/* 0x0c */
-+	u16	total_length;		/* 0x10 */
-+	u16	WEP_length;			/* 0x12 */
-+	u32	WEP_ofs;			/* 0x14 */
-+
-+/* the following 16 bytes do not change when acx100 owns the descriptor */
-+	u8	driverWorkspace[16];		/* 0x18 */
-+
-+	u8	Ctl_8;
-+	u8	rate;
-+	u8	error;
-+	u8	SNR;				/* Signal-to-Noise Ratio */
-+	u8	RxLevel;
-+	u8	queue_ctrl;
-+	u16	unknown;
-+	u32	unknown2;
-+} ACX_PACKED;		/* size 52 = 0x34 */
-+
-+#if defined(ACX_PCI) || defined(ACX_MEM)
-+
-+/* Register I/O offsets */
-+#define ACX100_EEPROM_ID_OFFSET	0x380
-+
-+/* please add further ACX hardware register definitions only when
-+   it turns out you need them in the driver, and please try to use
-+   firmware functionality instead, since using direct I/O access instead
-+   of letting the firmware do it might confuse the firmware's state
-+   machine */
-+
-+/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION
-+** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */
-+enum {
-+	IO_ACX_SOFT_RESET = 0,
-+
-+	IO_ACX_SLV_MEM_ADDR,
-+	IO_ACX_SLV_MEM_DATA,
-+	IO_ACX_SLV_MEM_CTL,
-+	IO_ACX_SLV_END_CTL,
-+
-+	IO_ACX_FEMR,		/* Function Event Mask */
-+
-+	IO_ACX_INT_TRIG,
-+	IO_ACX_IRQ_MASK,
-+	IO_ACX_IRQ_STATUS_NON_DES,
-+	IO_ACX_IRQ_STATUS_CLEAR, /* CLEAR = clear on read */
-+	IO_ACX_IRQ_ACK,
-+	IO_ACX_HINT_TRIG,
-+
-+	IO_ACX_ENABLE,
-+
-+	IO_ACX_EEPROM_CTL,
-+	IO_ACX_EEPROM_ADDR,
-+	IO_ACX_EEPROM_DATA,
-+	IO_ACX_EEPROM_CFG,
-+
-+	IO_ACX_PHY_ADDR,
-+	IO_ACX_PHY_DATA,
-+	IO_ACX_PHY_CTL,
-+
-+	IO_ACX_GPIO_OE,
-+
-+	IO_ACX_GPIO_OUT,
-+
-+	IO_ACX_CMD_MAILBOX_OFFS,
-+	IO_ACX_INFO_MAILBOX_OFFS,
-+	IO_ACX_EEPROM_INFORMATION,
-+
-+	IO_ACX_EE_START,
-+	IO_ACX_SOR_CFG,
-+	IO_ACX_ECPU_CTRL
-+};
-+/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION
-+** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */
-+
-+/* Values for IO_ACX_INT_TRIG register: */
-+/* inform hw that rxdesc in queue needs processing */
-+#define INT_TRIG_RXPRC		0x08
-+/* inform hw that txdesc in queue needs processing */
-+#define INT_TRIG_TXPRC		0x04
-+/* ack that we received info from info mailbox */
-+#define INT_TRIG_INFOACK	0x02
-+/* inform hw that we have filled command mailbox */
-+#define INT_TRIG_CMD		0x01
-+
-+struct txhostdesc {
-+	acx_ptr	data_phy;			/* 0x00 [u8 *] */
-+	u16	data_offset;			/* 0x04 */
-+	u16	reserved;			/* 0x06 */
-+	u16	Ctl_16;	/* 16bit value, endianness!! */
-+	u16	length;			/* 0x0a */
-+	acx_ptr	desc_phy_next;		/* 0x0c [txhostdesc *] */
-+	acx_ptr	pNext;			/* 0x10 [txhostdesc *] */
-+	u32	Status;			/* 0x14, unused on Tx */
-+/* From here on you can use this area as you want (variable length, too!) */
-+	u8	*data;
-+} ACX_PACKED;
-+
-+struct rxhostdesc {
-+	acx_ptr	data_phy;			/* 0x00 [rxbuffer_t *] */
-+	u16	data_offset;			/* 0x04 */
-+	u16	reserved;			/* 0x06 */
-+	u16	Ctl_16;			/* 0x08; 16bit value, endianness!! */
-+	u16	length;			/* 0x0a */
-+	acx_ptr	desc_phy_next;		/* 0x0c [rxhostdesc_t *] */
-+	acx_ptr	pNext;			/* 0x10 [rxhostdesc_t *] */
-+	u32	Status;			/* 0x14 */
-+/* From here on you can use this area as you want (variable length, too!) */
-+	rxbuffer_t *data;
-+} ACX_PACKED;
-+
-+#endif /* ACX_PCI */
-+
-+/***********************************************************************
-+** USB structures and constants
-+*/
-+#ifdef ACX_USB
-+
-+/* Used for usb_txbuffer.desc field */
-+#define USB_TXBUF_TXDESC	0xA
-+/* Size of header (everything up to data[]) */
-+#define USB_TXBUF_HDRSIZE	14
-+typedef struct usb_txbuffer {
-+	u16	desc;
-+	u16	mpdu_len;
-+	u8	queue_index;
-+	u8	rate;
-+	u32	hostdata;
-+	u8	ctrl1;
-+	u8	ctrl2;
-+	u16	data_len;
-+	/* wlan packet content is placed here: */
-+	u8	data[WLAN_A4FR_MAXLEN_WEP_FCS];
-+} ACX_PACKED usb_txbuffer_t;
-+
-+/* USB returns either rx packets (see rxbuffer) or
-+** these "tx status" structs: */
-+typedef struct usb_txstatus {
-+	u16	mac_cnt_rcvd;		/* only 12 bits are len! (0xfff) */
-+	u8	queue_index;
-+	u8	mac_status;		/* seen 0x20 on tx failure */
-+	u32	hostdata;
-+	u8	rate;
-+	u8	ack_failures;
-+	u8	rts_failures;
-+	u8	rts_ok;
-+} ACX_PACKED usb_txstatus_t;
-+
-+typedef struct usb_tx {
-+	unsigned	busy:1;
-+	struct urb	*urb;
-+	acx_device_t	*adev;
-+	/* actual USB bulk output data block is here: */
-+	usb_txbuffer_t	bulkout;
-+} usb_tx_t;
-+
-+struct usb_rx_plain {
-+	unsigned	busy:1;
-+	struct urb	*urb;
-+	acx_device_t	*adev;
-+	rxbuffer_t	bulkin;
-+};
-+
-+typedef struct usb_rx {
-+	unsigned	busy:1;
-+	struct urb	*urb;
-+	acx_device_t	*adev;
-+	rxbuffer_t	bulkin;
-+ /* Make entire structure 4k. Report if it breaks something. */
-+	u8 padding[4*1024 - sizeof(struct usb_rx_plain)];
-+} usb_rx_t;
-+#endif /* ACX_USB */
-+
-+
-+/* Config Option structs */
-+
-+typedef struct co_antennas {
-+	u8	type;
-+	u8	len;
-+	u8	list[2];
-+} ACX_PACKED co_antennas_t;
-+
-+typedef struct co_powerlevels {
-+	u8	type;
-+	u8	len;
-+	u16	list[8];
-+} ACX_PACKED co_powerlevels_t;
-+
-+typedef struct co_datarates {
-+	u8	type;
-+	u8	len;
-+	u8	list[8];
-+} ACX_PACKED co_datarates_t;
-+
-+typedef struct co_domains {
-+	u8	type;
-+	u8	len;
-+	u8	list[6];
-+} ACX_PACKED co_domains_t;
-+
-+typedef struct co_product_id {
-+	u8	type;
-+	u8	len;
-+	u8	list[128];
-+} ACX_PACKED co_product_id_t;
-+
-+typedef struct co_manuf_id {
-+	u8	type;
-+	u8	len;
-+	u8	list[128];
-+} ACX_PACKED co_manuf_t;
-+
-+typedef struct co_fixed {
-+	char	NVSv[8];
-+/*	u16	NVS_vendor_offs;	ACX111-only */
-+/*	u16	unknown;		ACX111-only */
-+	u8	MAC[6];	/* ACX100-only */
-+	u16	probe_delay;	/* ACX100-only */
-+	u32	eof_memory;
-+	u8	dot11CCAModes;
-+	u8	dot11Diversity;
-+	u8	dot11ShortPreambleOption;
-+	u8	dot11PBCCOption;
-+	u8	dot11ChannelAgility;
-+	u8	dot11PhyType; /* FIXME: does 802.11 call it "dot11PHYType"? */
-+	u8	dot11TempType;
-+	u8	table_count;
-+} ACX_PACKED co_fixed_t;
-+
-+typedef struct acx111_ie_configoption {
-+	u16			type;
-+	u16			len;
-+/* Do not access below members directly, they are in fact variable length */
-+	co_fixed_t		fixed;
-+	co_antennas_t		antennas;
-+	co_powerlevels_t	power_levels;
-+	co_datarates_t		data_rates;
-+	co_domains_t		domains;
-+	co_product_id_t		product_id;
-+	co_manuf_t		manufacturer;
-+	u8			_padding[4];
-+} ACX_PACKED acx111_ie_configoption_t;
-+
-+
-+/***********************************************************************
-+** Main acx per-device data structure
-+*/
-+#define ACX_STATE_FW_LOADED	0x01
-+#define ACX_STATE_IFACE_UP	0x02
-+
-+/* MAC mode (BSS type) defines
-+ * Note that they shouldn't be redefined, since they are also used
-+ * during communication with firmware */
-+#define ACX_MODE_0_ADHOC	0
-+#define ACX_MODE_1_UNUSED	1
-+#define ACX_MODE_2_STA		2
-+#define ACX_MODE_3_AP		3
-+/* These are our own inventions. Sending these to firmware
-+** makes it stop emitting beacons, which is exactly what we want
-+** for these modes */
-+#define ACX_MODE_MONITOR	0xfe
-+#define ACX_MODE_OFF		0xff
-+/* 'Submode': identifies exact status of ADHOC/STA host */
-+#define ACX_STATUS_0_STOPPED		0
-+#define ACX_STATUS_1_SCANNING		1
-+#define ACX_STATUS_2_WAIT_AUTH		2
-+#define ACX_STATUS_3_AUTHENTICATED	3
-+#define ACX_STATUS_4_ASSOCIATED		4
-+
-+/* FIXME: this should be named something like struct acx_priv (typedef'd to
-+ * acx_priv_t) */
-+
-+/* non-firmware struct, no packing necessary */
-+struct acx_device {
-+	/* most frequent accesses first (dereferencing and cache line!) */
-+
-+	/*** Locking ***/
-+	/* FIXME: try to convert semaphore to more efficient mutex according
-+	   to Ingo Molnar's docs (but not before driver is in mainline or
-+		 pre-mutex Linux 2.6.10 is very outdated). */
-+	struct semaphore	sem;
-+	spinlock_t		lock;
-+#if defined(PARANOID_LOCKING) /* Lock debugging */
-+	const char		*last_sem;
-+	const char		*last_lock;
-+	unsigned long		sem_time;
-+	unsigned long		lock_time;
-+#endif
-+#ifdef ACX_MEM
-+        spinlock_t              txbuf_lock;
-+#endif
-+
-+	/*** Linux network device ***/
-+	struct net_device	*ndev;		/* pointer to linux netdevice */
-+
-+	/*** Device statistics ***/
-+	struct net_device_stats	stats;		/* net device statistics */
-+#ifdef WIRELESS_EXT
-+	struct iw_statistics	wstats;		/* wireless statistics */
-+#endif
-+	/*** Power managment ***/
-+	struct pm_dev		*pm;		/* PM crap */
-+
-+	/*** Management timer ***/
-+	struct timer_list	mgmt_timer;
-+
-+	/*** Hardware identification ***/
-+	const char		*chip_name;
-+	u8			dev_type;
-+	u8			chip_type;
-+	u8			form_factor;
-+	u8			radio_type;
-+	u8			eeprom_version;
-+
-+	/*** Config retrieved from EEPROM ***/
-+	char			cfgopt_NVSv[8];
-+	u16			cfgopt_NVS_vendor_offs;
-+	u8			cfgopt_MAC[6];
-+	u16			cfgopt_probe_delay;
-+	u32			cfgopt_eof_memory;
-+	u8			cfgopt_dot11CCAModes;
-+	u8			cfgopt_dot11Diversity;
-+	u8			cfgopt_dot11ShortPreambleOption;
-+	u8			cfgopt_dot11PBCCOption;
-+	u8			cfgopt_dot11ChannelAgility;
-+	u8			cfgopt_dot11PhyType;
-+	u8			cfgopt_dot11TempType;
-+	co_antennas_t		cfgopt_antennas;
-+	co_powerlevels_t	cfgopt_power_levels;
-+	co_datarates_t		cfgopt_data_rates;
-+	co_domains_t		cfgopt_domains;
-+	co_product_id_t		cfgopt_product_id;
-+	co_manuf_t		cfgopt_manufacturer;
-+
-+	/*** Firmware identification ***/
-+	char		firmware_version[FW_ID_SIZE+1];
-+	u32		firmware_numver;
-+	u32		firmware_id;
-+	const u16	*ie_len;
-+	const u16	*ie_len_dot11;
-+
-+	/*** Device state ***/
-+	u16		dev_state_mask;
-+	u8		led_power;		/* power LED status */
-+	u32		get_mask;		/* mask of settings to fetch from the card */
-+	u32		set_mask;		/* mask of settings to write to the card */
-+
-+	/* Barely used in USB case */
-+	u16		irq_status;
-+
-+	u8		after_interrupt_jobs;	/* mini job list for doing actions after an interrupt occurred */
-+	WORK_STRUCT	after_interrupt_task;	/* our task for after interrupt actions */
-+
-+	/*** scanning ***/
-+	u16		scan_count;		/* number of times to do channel scan */
-+	u8		scan_mode;		/* 0 == active, 1 == passive, 2 == background */
-+	u8		scan_rate;
-+	u16		scan_duration;
-+	u16		scan_probe_delay;
-+#if WIRELESS_EXT > 15
-+	struct iw_spy_data	spy_data;	/* FIXME: needs to be implemented! */
-+#endif
-+
-+	/*** Wireless network settings ***/
-+	/* copy of the device address (ifconfig hw ether) that we actually use
-+	** for 802.11; copied over from the network device's MAC address
-+	** (ifconfig) when it makes sense only */
-+	u8		dev_addr[MAX_ADDR_LEN];
-+	u8		bssid[ETH_ALEN];	/* the BSSID after having joined */
-+	u8		ap[ETH_ALEN];		/* The AP we want, FF:FF:FF:FF:FF:FF is any */
-+	u16		aid;			/* The Association ID sent from the AP / last used AID if we're an AP */
-+	u16		mode;			/* mode from iwconfig */
-+	int		monitor_type;		/* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */
-+	u16		status;			/* 802.11 association status */
-+	u8		essid_active;		/* specific ESSID active, or select any? */
-+	u8		essid_len;		/* to avoid dozens of strlen() */
-+	/* INCLUDES \0 termination for easy printf - but many places
-+	** simply want the string data memcpy'd plus a length indicator!
-+	** Keep that in mind... */
-+	char		essid[IW_ESSID_MAX_SIZE+1];
-+	/* essid we are going to use for association, in case of "essid 'any'"
-+	** and in case of hidden ESSID (use configured ESSID then) */
-+	char		essid_for_assoc[IW_ESSID_MAX_SIZE+1];
-+	char		nick[IW_ESSID_MAX_SIZE+1]; /* see essid! */
-+	u8		channel;
-+	u8		reg_dom_id;		/* reg domain setting */
-+	u16		reg_dom_chanmask;
-+	u16		auth_or_assoc_retries;
-+	u16		scan_retries;
-+	unsigned long	scan_start;		/* YES, jiffies is defined as "unsigned long" */
-+
-+	/* stations known to us (if we're an ap) */
-+	client_t	sta_list[32];		/* tab is larger than list, so that */
-+	client_t	*sta_hash_tab[64];	/* hash collisions are not likely */
-+	client_t	*ap_client;		/* this one is our AP (STA mode only) */
-+
-+	int		dup_count;
-+	int		nondup_count;
-+	unsigned long	dup_msg_expiry;
-+	u16		last_seq_ctrl;		/* duplicate packet detection */
-+
-+	/* 802.11 power save mode */
-+	u8		ps_wakeup_cfg;
-+	u8		ps_listen_interval;
-+	u8		ps_options;
-+	u8		ps_hangover_period;
-+	u32		ps_enhanced_transition_time;
-+	u32		ps_beacon_rx_time;
-+
-+	/*** PHY settings ***/
-+	u8		fallback_threshold;
-+	u8		stepup_threshold;
-+	u16		rate_basic;
-+	u16		rate_oper;
-+	u16		rate_bcast;
-+	u16		rate_bcast100;
-+	u8		rate_auto;		/* false if "iwconfig rate N" (WITHOUT 'auto'!) */
-+	u8		preamble_mode;		/* 0 == Long Preamble, 1 == Short, 2 == Auto */
-+	u8		preamble_cur;
-+
-+	u8		tx_disabled;
-+	u8		tx_level_dbm;
-+	/* u8		tx_level_val; */
-+	/* u8		tx_level_auto;		whether to do automatic power adjustment */
-+
-+	unsigned long	recalib_time_last_success;
-+	unsigned long	recalib_time_last_attempt;
-+	int		recalib_failure_count;
-+	int		recalib_msg_ratelimit;
-+	int		retry_errors_msg_ratelimit;
-+
-+	unsigned long	brange_time_last_state_change;	/* time the power LED was last changed */
-+	u8		brange_last_state;	/* last state of the LED */
-+	u8		brange_max_quality;	/* maximum quality that equates to full speed */
-+
-+	u8		sensitivity;
-+	u8		antenna;		/* antenna settings */
-+	u8		ed_threshold;		/* energy detect threshold */
-+	u8		cca;			/* clear channel assessment */
-+
-+	u16		rts_threshold;
-+	u16		frag_threshold;
-+	u32		short_retry;
-+	u32		long_retry;
-+	u16		msdu_lifetime;
-+	u16		listen_interval;	/* given in units of beacon interval */
-+	u32		beacon_interval;
-+
-+	u16		capabilities;
-+	u8		rate_supported_len;
-+	u8		rate_supported[13];
-+
-+	/*** Encryption settings (WEP) ***/
-+	u32		auth_alg;		/* used in transmit_authen1 */
-+	u8		wep_enabled;
-+	u8		wep_restricted;
-+	u8		wep_current_index;
-+	wep_key_t	wep_keys[DOT11_MAX_DEFAULT_WEP_KEYS];	/* the default WEP keys */
-+	key_struct_t	wep_key_struct[10];
-+
-+	/*** Unknown ***/
-+	u8		dtim_interval;
-+
-+#ifdef ACX_MEM
-+        u32 acx_txbuf_start;
-+        int acx_txbuf_numblocks;
-+        u32 acx_txbuf_free;                    /* addr of head of free list          */
-+        int acx_txbuf_blocks_free;             /* how many are still open            */
-+        queueindicator_t *acx_queue_indicator;
-+#endif
-+
-+	/*** Card Rx/Tx management ***/
-+	u16		rx_config_1;
-+	u16		rx_config_2;
-+	u16		memblocksize;
-+	unsigned int	tx_free;
-+	unsigned int	tx_head; /* keep as close as possible to Tx stuff below (cache line) */
-+	u16		phy_header_len;
-+
-+/*************************************************************************
-+ *** PCI/USB/... must be last or else hw agnostic code breaks horribly ***
-+ *************************************************************************/
-+
-+	/* hack to let common code compile. FIXME */
-+	dma_addr_t	rxhostdesc_startphy;
-+
-+	/*** PCI stuff ***/
-+#if defined(ACX_PCI) || defined(ACX_MEM)
-+	/* pointers to tx buffers, tx host descriptors (in host memory)
-+	** and tx descs in device memory */
-+	unsigned int	tx_tail;
-+	u8		*txbuf_start;
-+	txhostdesc_t	*txhostdesc_start;
-+	txdesc_t	*txdesc_start;	/* points to PCI-mapped memory */
-+	dma_addr_t	txbuf_startphy;
-+	dma_addr_t	txhostdesc_startphy;
-+	/* sizes of above host memory areas */
-+	unsigned int	txbuf_area_size;
-+	unsigned int	txhostdesc_area_size;
-+
-+	unsigned int	txdesc_size;	/* size of txdesc; ACX111 = ACX100 + 4 */
-+	client_t	*txc[TX_CNT];
-+	u16		txr[TX_CNT];
-+
-+	/* same for rx */
-+	unsigned int	rx_tail;
-+	rxbuffer_t	*rxbuf_start;
-+	rxhostdesc_t	*rxhostdesc_start;
-+	rxdesc_t	*rxdesc_start;
-+	/* physical addresses of above host memory areas */
-+	dma_addr_t	rxbuf_startphy;
-+	/* dma_addr_t	rxhostdesc_startphy; */
-+	unsigned int	rxbuf_area_size;
-+	unsigned int	rxhostdesc_area_size;
-+
-+	u8		need_radio_fw;
-+	u8		irqs_active;	/* whether irq sending is activated */
-+
-+	const u16	*io;		/* points to ACX100 or ACX111 PCI I/O register address set */
-+
-+#ifdef ACX_PCI
-+	struct pci_dev	*pdev;
-+#endif
-+#ifdef ACX_MEM
-+	struct device	*dev;
-+#endif
-+
-+#ifdef ACX_PCI
-+	unsigned long	membase;
-+#endif
-+#ifdef ACX_MEM
-+	volatile u32	*membase;
-+#endif
-+	unsigned long	membase2;
-+#ifdef ACX_PCI
-+	void __iomem	*iobase;
-+#endif
-+#ifdef ACX_MEM
-+	volatile u32	*iobase;
-+#endif
-+	void __iomem	*iobase2;
-+	/* command interface */
-+	u8 __iomem	*cmd_area;
-+	u8 __iomem	*info_area;
-+
-+	u16		irq_mask;		/* interrupt types to mask out (not wanted) with many IRQs activated */
-+	u16		irq_mask_off;		/* interrupt types to mask out (not wanted) with IRQs off */
-+	unsigned int	irq_loops_this_jiffy;
-+	unsigned long	irq_last_jiffies;
-+#endif
-+
-+	/*** USB stuff ***/
-+#ifdef ACX_USB
-+	struct usb_device	*usbdev;
-+
-+	rxbuffer_t	rxtruncbuf;
-+
-+	usb_tx_t	*usb_tx;
-+	usb_rx_t	*usb_rx;
-+
-+	int		bulkinep;	/* bulk-in endpoint */
-+	int		bulkoutep;	/* bulk-out endpoint */
-+	int		rxtruncsize;
-+#endif
-+
-+};
-+
-+static inline acx_device_t*
-+ndev2adev(struct net_device *ndev)
-+{
-+	return netdev_priv(ndev);
-+}
-+
-+
-+/* For use with ACX1xx_IE_RXCONFIG */
-+/*  bit     description
-+ *    13   include additional header (length etc.) *required*
-+ *		struct is defined in 'struct rxbuffer'
-+ *		is this bit acx100 only? does acx111 always put the header,
-+ *		and bit setting is irrelevant? --vda
-+ *    10   receive frames only with SSID used in last join cmd
-+ *     9   discard broadcast
-+ *     8   receive packets for multicast address 1
-+ *     7   receive packets for multicast address 0
-+ *     6   discard all multicast packets
-+ *     5   discard frames from foreign BSSID
-+ *     4   discard frames with foreign destination MAC address
-+ *     3   promiscuous mode (receive ALL frames, disable filter)
-+ *     2   include FCS
-+ *     1   include phy header
-+ *     0   ???
-+ */
-+#define RX_CFG1_INCLUDE_RXBUF_HDR	0x2000 /* ACX100 only */
-+#define RX_CFG1_FILTER_SSID		0x0400
-+#define RX_CFG1_FILTER_BCAST		0x0200
-+#define RX_CFG1_RCV_MC_ADDR1		0x0100
-+#define RX_CFG1_RCV_MC_ADDR0		0x0080
-+#define RX_CFG1_FILTER_ALL_MULTI	0x0040
-+#define RX_CFG1_FILTER_BSSID		0x0020
-+#define RX_CFG1_FILTER_MAC		0x0010
-+#define RX_CFG1_RCV_PROMISCUOUS		0x0008
-+#define RX_CFG1_INCLUDE_FCS		0x0004
-+#define RX_CFG1_INCLUDE_PHY_HDR		(WANT_PHY_HDR ? 0x0002 : 0)
-+/*  bit     description
-+ *    11   receive association requests etc.
-+ *    10   receive authentication frames
-+ *     9   receive beacon frames
-+ *     8   receive contention free packets
-+ *     7   receive control frames
-+ *     6   receive data frames
-+ *     5   receive broken frames
-+ *     4   receive management frames
-+ *     3   receive probe requests
-+ *     2   receive probe responses
-+ *     1   receive RTS/CTS/ACK frames
-+ *     0   receive other
-+ */
-+#define RX_CFG2_RCV_ASSOC_REQ		0x0800
-+#define RX_CFG2_RCV_AUTH_FRAMES		0x0400
-+#define RX_CFG2_RCV_BEACON_FRAMES	0x0200
-+#define RX_CFG2_RCV_CONTENTION_FREE	0x0100
-+#define RX_CFG2_RCV_CTRL_FRAMES		0x0080
-+#define RX_CFG2_RCV_DATA_FRAMES		0x0040
-+#define RX_CFG2_RCV_BROKEN_FRAMES	0x0020
-+#define RX_CFG2_RCV_MGMT_FRAMES		0x0010
-+#define RX_CFG2_RCV_PROBE_REQ		0x0008
-+#define RX_CFG2_RCV_PROBE_RESP		0x0004
-+#define RX_CFG2_RCV_ACK_FRAMES		0x0002
-+#define RX_CFG2_RCV_OTHER		0x0001
-+
-+/* For use with ACX1xx_IE_FEATURE_CONFIG */
-+#define FEATURE1_80MHZ_CLOCK	0x00000040L
-+#define FEATURE1_4X		0x00000020L
-+#define FEATURE1_LOW_RX		0x00000008L
-+#define FEATURE1_EXTRA_LOW_RX	0x00000001L
-+
-+#define FEATURE2_SNIFFER	0x00000080L
-+#define FEATURE2_NO_TXCRYPT	0x00000001L
-+
-+/*-- get and set mask values --*/
-+#define GETSET_LED_POWER	0x00000001L
-+#define GETSET_STATION_ID	0x00000002L
-+#define SET_TEMPLATES		0x00000004L
-+#define SET_STA_LIST		0x00000008L
-+#define GETSET_TX		0x00000010L
-+#define GETSET_RX		0x00000020L
-+#define SET_RXCONFIG		0x00000040L
-+#define GETSET_ANTENNA		0x00000080L
-+#define GETSET_SENSITIVITY	0x00000100L
-+#define GETSET_TXPOWER		0x00000200L
-+#define GETSET_ED_THRESH	0x00000400L
-+#define GETSET_CCA		0x00000800L
-+#define GETSET_POWER_80211	0x00001000L
-+#define GETSET_RETRY		0x00002000L
-+#define GETSET_REG_DOMAIN	0x00004000L
-+#define GETSET_CHANNEL		0x00008000L
-+/* Used when ESSID changes etc and we need to scan for AP anew */
-+#define GETSET_RESCAN		0x00010000L
-+#define GETSET_MODE		0x00020000L
-+#define GETSET_WEP		0x00040000L
-+#define SET_WEP_OPTIONS		0x00080000L
-+#define SET_MSDU_LIFETIME	0x00100000L
-+#define SET_RATE_FALLBACK	0x00200000L
-+
-+/* keep in sync with the above */
-+#define GETSET_ALL	(0 \
-+/* GETSET_LED_POWER */	| 0x00000001L \
-+/* GETSET_STATION_ID */	| 0x00000002L \
-+/* SET_TEMPLATES */	| 0x00000004L \
-+/* SET_STA_LIST */	| 0x00000008L \
-+/* GETSET_TX */		| 0x00000010L \
-+/* GETSET_RX */		| 0x00000020L \
-+/* SET_RXCONFIG */	| 0x00000040L \
-+/* GETSET_ANTENNA */	| 0x00000080L \
-+/* GETSET_SENSITIVITY */| 0x00000100L \
-+/* GETSET_TXPOWER */	| 0x00000200L \
-+/* GETSET_ED_THRESH */	| 0x00000400L \
-+/* GETSET_CCA */	| 0x00000800L \
-+/* GETSET_POWER_80211 */| 0x00001000L \
-+/* GETSET_RETRY */	| 0x00002000L \
-+/* GETSET_REG_DOMAIN */	| 0x00004000L \
-+/* GETSET_CHANNEL */	| 0x00008000L \
-+/* GETSET_RESCAN */	| 0x00010000L \
-+/* GETSET_MODE */	| 0x00020000L \
-+/* GETSET_WEP */	| 0x00040000L \
-+/* SET_WEP_OPTIONS */	| 0x00080000L \
-+/* SET_MSDU_LIFETIME */	| 0x00100000L \
-+/* SET_RATE_FALLBACK */	| 0x00200000L \
-+			)
-+
-+
-+/***********************************************************************
-+** Firmware loading
-+*/
-+#include <linux/firmware.h>	/* request_firmware() */
-+#include <linux/pci.h>		/* struct pci_device */
-+
-+
-+/***********************************************************************
-+*/
-+typedef struct acx100_ie_memblocksize {
-+	u16	type;
-+	u16	len;
-+	u16	size;
-+} ACX_PACKED acx100_ie_memblocksize_t;
-+
-+typedef struct acx100_ie_queueconfig {
-+	u16	type;
-+	u16	len;
-+	u32	AreaSize;
-+	u32	RxQueueStart;
-+	u8	QueueOptions;
-+	u8	NumTxQueues;
-+	u8	NumRxDesc;	 /* for USB only */
-+	u8	pad1;
-+	u32	QueueEnd;
-+	u32	HostQueueEnd; /* QueueEnd2 */
-+	u32	TxQueueStart;
-+	u8	TxQueuePri;
-+	u8	NumTxDesc;
-+	u16	pad2;
-+} ACX_PACKED acx100_ie_queueconfig_t;
-+
-+typedef struct acx111_ie_queueconfig {
-+	u16	type;
-+	u16	len;
-+	u32	tx_memory_block_address;
-+	u32	rx_memory_block_address;
-+	u32	rx1_queue_address;
-+	u32	reserved1;
-+	u32	tx1_queue_address;
-+	u8	tx1_attributes;
-+	u16	reserved2;
-+	u8	reserved3;
-+} ACX_PACKED acx111_ie_queueconfig_t;
-+
-+typedef struct acx100_ie_memconfigoption {
-+	u16	type;
-+	u16	len;
-+	u32	DMA_config;
-+	acx_ptr	pRxHostDesc;
-+	u32	rx_mem;
-+	u32	tx_mem;
-+	u16	RxBlockNum;
-+	u16	TxBlockNum;
-+} ACX_PACKED acx100_ie_memconfigoption_t;
-+
-+typedef struct acx111_ie_memoryconfig {
-+	u16	type;
-+	u16	len;
-+	u16	no_of_stations;
-+	u16	memory_block_size;
-+	u8	tx_rx_memory_block_allocation;
-+	u8	count_rx_queues;
-+	u8	count_tx_queues;
-+	u8	options;
-+	u8	fragmentation;
-+	u16	reserved1;
-+	u8	reserved2;
-+
-+	/* start of rx1 block */
-+	u8	rx_queue1_count_descs;
-+	u8	rx_queue1_reserved1;
-+	u8	rx_queue1_type; /* must be set to 7 */
-+	u8	rx_queue1_prio; /* must be set to 0 */
-+	acx_ptr	rx_queue1_host_rx_start;
-+	/* end of rx1 block */
-+
-+	/* start of tx1 block */
-+	u8	tx_queue1_count_descs;
-+	u8	tx_queue1_reserved1;
-+	u8	tx_queue1_reserved2;
-+	u8	tx_queue1_attributes;
-+	/* end of tx1 block */
-+} ACX_PACKED acx111_ie_memoryconfig_t;
-+
-+typedef struct acx_ie_memmap {
-+	u16	type;
-+	u16	len;
-+	u32	CodeStart;
-+	u32	CodeEnd;
-+	u32	WEPCacheStart;
-+	u32	WEPCacheEnd;
-+	u32	PacketTemplateStart;
-+	u32	PacketTemplateEnd;
-+	u32	QueueStart;
-+	u32	QueueEnd;
-+	u32	PoolStart;
-+	u32	PoolEnd;
-+} ACX_PACKED acx_ie_memmap_t;
-+
-+typedef struct acx111_ie_feature_config {
-+	u16	type;
-+	u16	len;
-+	u32	feature_options;
-+	u32	data_flow_options;
-+} ACX_PACKED acx111_ie_feature_config_t;
-+
-+typedef struct acx111_ie_tx_level {
-+	u16	type;
-+	u16	len;
-+	u8	level;
-+} ACX_PACKED acx111_ie_tx_level_t;
-+
-+#define PS_CFG_ENABLE		0x80
-+#define PS_CFG_PENDING		0x40 /* status flag when entering PS */
-+#define PS_CFG_WAKEUP_MODE_MASK	0x07
-+#define PS_CFG_WAKEUP_BY_HOST	0x03
-+#define PS_CFG_WAKEUP_EACH_ITVL	0x02
-+#define PS_CFG_WAKEUP_ON_DTIM	0x01
-+#define PS_CFG_WAKEUP_ALL_BEAC	0x00
-+
-+/* Enhanced PS mode: sleep until Rx Beacon w/ the STA's AID bit set
-+** in the TIM; newer firmwares only(?) */
-+#define PS_OPT_ENA_ENHANCED_PS	0x04
-+#define PS_OPT_TX_PSPOLL	0x02 /* send PSPoll frame to fetch waiting frames from AP (on frame with matching AID) */
-+#define PS_OPT_STILL_RCV_BCASTS	0x01
-+
-+typedef struct acx100_ie_powersave {
-+	u16	type;
-+	u16	len;
-+	u8	wakeup_cfg;
-+	u8	listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */
-+	u8	options;
-+	u8	hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */
-+	u16	enhanced_ps_transition_time; /* rem. wake time for Enh. PS */
-+} ACX_PACKED acx100_ie_powersave_t;
-+
-+typedef struct acx111_ie_powersave {
-+	u16	type;
-+	u16	len;
-+	u8	wakeup_cfg;
-+	u8	listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */
-+	u8	options;
-+	u8	hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */
-+	u32	beacon_rx_time;
-+	u32	enhanced_ps_transition_time; /* rem. wake time for Enh. PS */
-+} ACX_PACKED acx111_ie_powersave_t;
-+
-+
-+/***********************************************************************
-+** Commands and template structures
-+*/
-+
-+/*
-+** SCAN command structure
-+**
-+** even though acx100 scan rates match RATE100 constants,
-+** acx111 ones do not match! Therefore we do not use RATE100 #defines */
-+#define ACX_SCAN_RATE_1		10
-+#define ACX_SCAN_RATE_2		20
-+#define ACX_SCAN_RATE_5		55
-+#define ACX_SCAN_RATE_11	110
-+#define ACX_SCAN_RATE_22	220
-+#define ACX_SCAN_RATE_PBCC	0x80	/* OR with this if needed */
-+#define ACX_SCAN_OPT_ACTIVE	0x00	/* a bit mask */
-+#define ACX_SCAN_OPT_PASSIVE	0x01
-+/* Background scan: we go into Power Save mode (by transmitting
-+** NULL data frame to AP with the power mgmt bit set), do the scan,
-+** and then exit Power Save mode. A plus is that AP buffers frames
-+** for us while we do background scan. Thus we avoid frame losses.
-+** Background scan can be active or passive, just like normal one */
-+#define ACX_SCAN_OPT_BACKGROUND	0x02
-+typedef struct acx100_scan {
-+	u16	count;	/* number of scans to do, 0xffff == continuous */
-+	u16	start_chan;
-+	u16	flags;	/* channel list mask; 0x8000 == all channels? */
-+	u8	max_rate;	/* max. probe rate */
-+	u8	options;	/* bit mask, see defines above */
-+	u16	chan_duration;
-+	u16	max_probe_delay;
-+} ACX_PACKED acx100_scan_t;			/* length 0xc */
-+
-+#define ACX111_SCAN_RATE_6	0x0B
-+#define ACX111_SCAN_RATE_9	0x0F
-+#define ACX111_SCAN_RATE_12	0x0A
-+#define ACX111_SCAN_RATE_18	0x0E
-+#define ACX111_SCAN_RATE_24	0x09
-+#define ACX111_SCAN_RATE_36	0x0D
-+#define ACX111_SCAN_RATE_48	0x08
-+#define ACX111_SCAN_RATE_54	0x0C
-+#define ACX111_SCAN_OPT_5GHZ    0x04	/* else 2.4GHZ */
-+#define ACX111_SCAN_MOD_SHORTPRE 0x01	/* you can combine SHORTPRE and PBCC */
-+#define ACX111_SCAN_MOD_PBCC	0x80
-+#define ACX111_SCAN_MOD_OFDM	0x40
-+typedef struct acx111_scan {
-+	u16	count;		/* number of scans to do */
-+	u8	channel_list_select; /* 0: scan all channels, 1: from chan_list only */
-+	u16	reserved1;
-+	u8	reserved2;
-+	u8	rate;		/* rate for probe requests (if active scan) */
-+	u8	options;		/* bit mask, see defines above */
-+	u16	chan_duration;	/* min time to wait for reply on one channel (in TU) */
-+						/* (active scan only) (802.11 section 11.1.3.2.2) */
-+	u16	max_probe_delay;	/* max time to wait for reply on one channel (active scan) */
-+						/* time to listen on a channel (passive scan) */
-+	u8	modulation;
-+	u8	channel_list[26];	/* bits 7:0 first byte: channels 8:1 */
-+						/* bits 7:0 second byte: channels 16:9 */
-+						/* 26 bytes is enough to cover 802.11a */
-+} ACX_PACKED acx111_scan_t;
-+
-+
-+/*
-+** Radio calibration command structure
-+*/
-+typedef struct acx111_cmd_radiocalib {
-+/* 0x80000000 == automatic calibration by firmware, according to interval;
-+ * bits 0..3: select calibration methods to go through:
-+ * calib based on DC, AfeDC, Tx mismatch, Tx equilization */
-+	u32	methods;
-+	u32	interval;
-+} ACX_PACKED acx111_cmd_radiocalib_t;
-+
-+
-+/*
-+** Packet template structures
-+**
-+** Packet templates store contents of Beacon, Probe response, Probe request,
-+** Null data frame, and TIM data frame. Firmware automatically transmits
-+** contents of template at appropriate time:
-+** - Beacon: when configured as AP or Ad-hoc
-+** - Probe response: when configured as AP or Ad-hoc, whenever
-+**   a Probe request frame is received
-+** - Probe request: when host issues SCAN command (active)
-+** - Null data frame: when entering 802.11 power save mode
-+** - TIM data: at the end of Beacon frames (if no TIM template
-+**   is configured, then transmits default TIM)
-+** NB:
-+** - size field must be set to size of actual template
-+**   (NOT sizeof(struct) - templates are variable in length),
-+**   size field is not itself counted.
-+** - members flagged with an asterisk must be initialized with host,
-+**   rest must be zero filled.
-+** - variable length fields shown only in comments */
-+typedef struct acx_template_tim {
-+	u16	size;
-+	u8	tim_eid;	/* 00 1 TIM IE ID * */
-+	u8	len;		/* 01 1 Length * */
-+	u8	dtim_cnt;	/* 02 1 DTIM Count */
-+	u8	dtim_period;	/* 03 1 DTIM Period */
-+	u8	bitmap_ctrl;	/* 04 1 Bitmap Control * (except bit0) */
-+					/* 05 n Partial Virtual Bitmap * */
-+	u8	variable[0x100 - 1-1-1-1-1];
-+} ACX_PACKED acx_template_tim_t;
-+
-+typedef struct acx_template_probereq {
-+	u16	size;
-+	u16	fc;		/* 00 2 fc * */
-+	u16	dur;		/* 02 2 Duration */
-+	u8	da[6];	/* 04 6 Destination Address * */
-+	u8	sa[6];	/* 0A 6 Source Address * */
-+	u8	bssid[6];	/* 10 6 BSSID * */
-+	u16	seq;		/* 16 2 Sequence Control */
-+					/* 18 n SSID * */
-+					/* nn n Supported Rates * */
-+	u8	variable[0x44 - 2-2-6-6-6-2];
-+} ACX_PACKED acx_template_probereq_t;
-+
-+typedef struct acx_template_proberesp {
-+	u16	size;
-+	u16	fc;		/* 00 2 fc * (bits [15:12] and [10:8] per 802.11 section 7.1.3.1) */
-+	u16	dur;		/* 02 2 Duration */
-+	u8	da[6];	/* 04 6 Destination Address */
-+	u8	sa[6];	/* 0A 6 Source Address */
-+	u8	bssid[6];	/* 10 6 BSSID */
-+	u16	seq;		/* 16 2 Sequence Control */
-+	u8	timestamp[8];/* 18 8 Timestamp */
-+	u16	beacon_interval; /* 20 2 Beacon Interval * */
-+	u16	cap;		/* 22 2 Capability Information * */
-+					/* 24 n SSID * */
-+					/* nn n Supported Rates * */
-+					/* nn 1 DS Parameter Set * */
-+	u8	variable[0x54 - 2-2-6-6-6-2-8-2-2];
-+} ACX_PACKED acx_template_proberesp_t;
-+#define acx_template_beacon_t acx_template_proberesp_t
-+#define acx_template_beacon acx_template_proberesp
-+
-+typedef struct acx_template_nullframe {
-+	u16	size;
-+	struct wlan_hdr_a3 hdr;
-+} ACX_PACKED acx_template_nullframe_t;
-+
-+
-+/*
-+** JOIN command structure
-+**
-+** as opposed to acx100, acx111 dtim interval is AFTER rates_basic111.
-+** NOTE: took me about an hour to get !@#$%^& packing right --> struct packing is eeeeevil... */
-+typedef struct acx_joinbss {
-+	u8	bssid[ETH_ALEN];
-+	u16	beacon_interval;
-+	union {
-+		struct {
-+			u8	dtim_interval;
-+			u8	rates_basic;
-+			u8	rates_supported;
-+		  /*
-+		   * ARM compiler doesn't pack correctly unless unions
-+		   * inside structures are multiples of 4 bytes.  Ugh.
-+		   */
-+		        u8	genfrm_txrate;	/* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */
-+		} ACX_PACKED acx100;
-+		struct {
-+			u16	rates_basic;
-+			u8	dtim_interval;
-+		        u8	genfrm_txrate;	/* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */
-+		} ACX_PACKED acx111;
-+	        /*
-+		 * ARM compiler doesn't pack correctly unles unions are aligned on
-+		 * 4 byte boundaries and are multiples of 4 bytes.
-+		 */
-+	        struct {
-+		      u8 d1;
-+		      u8 d2;
-+		      u8 d3;
-+		      u8 genfrm_txrate;
-+	        } ACX_PACKED txrate;
-+	} ACX_PACKED u;
-+	u8	genfrm_mod_pre;	/* generated frame modulation/preamble:
-+						** bit7: PBCC, bit6: OFDM (else CCK/DQPSK/DBPSK)
-+						** bit5: short pre */
-+	u8	macmode;	/* BSS Type, must be one of ACX_MODE_xxx */
-+	u8	channel;
-+	u8	essid_len;
-+	char	essid[IW_ESSID_MAX_SIZE];
-+} ACX_PACKED acx_joinbss_t;
-+
-+#define JOINBSS_RATES_1		0x01
-+#define JOINBSS_RATES_2		0x02
-+#define JOINBSS_RATES_5		0x04
-+#define JOINBSS_RATES_11	0x08
-+#define JOINBSS_RATES_22	0x10
-+
-+/* Looks like missing bits are used to indicate 11g rates!
-+** (it follows from the fact that constants below match 1:1 to RATE111_nn)
-+** This was actually seen! Look at that Assoc Request sent by acx111,
-+** it _does_ contain 11g rates in basic set:
-+01:30:20.070772 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1
-+01:30:20.074425 Authentication (Open System)-1: Succesful
-+01:30:20.076539 Authentication (Open System)-2:
-+01:30:20.076620 Acknowledgment
-+01:30:20.088546 Assoc Request (xxx) [1.0* 2.0* 5.5* 6.0* 9.0* 11.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit]
-+01:30:20.122413 Assoc Response AID(1) :: Succesful
-+01:30:20.122679 Acknowledgment
-+01:30:20.173204 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1
-+*/
-+#define JOINBSS_RATES_BASIC111_1	0x0001
-+#define JOINBSS_RATES_BASIC111_2	0x0002
-+#define JOINBSS_RATES_BASIC111_5	0x0004
-+#define JOINBSS_RATES_BASIC111_11	0x0020
-+#define JOINBSS_RATES_BASIC111_22	0x0100
-+
-+
-+/***********************************************************************
-+*/
-+typedef struct mem_read_write {
-+	u16	addr;
-+	u16	type; /* 0x0 int. RAM / 0xffff MAC reg. / 0x81 PHY RAM / 0x82 PHY reg.; or maybe it's actually 0x30 for MAC? Better verify it by writing and reading back and checking whether the value holds! */
-+	u32	len;
-+	u32	data;
-+} ACX_PACKED mem_read_write_t;
-+
-+typedef struct firmware_image {
-+	u32	chksum;
-+	u32	size;
-+	u8	data[1]; /* the byte array of the actual firmware... */
-+} ACX_PACKED firmware_image_t;
-+
-+typedef struct acx_cmd_radioinit {
-+	u32	offset;
-+	u32	len;
-+} ACX_PACKED acx_cmd_radioinit_t;
-+
-+typedef struct acx100_ie_wep_options {
-+	u16	type;
-+	u16	len;
-+	u16	NumKeys;	/* max # of keys */
-+	u8	WEPOption;	/* 0 == decrypt default key only, 1 == override decrypt */
-+	u8	Pad;		/* used only for acx111 */
-+} ACX_PACKED acx100_ie_wep_options_t;
-+
-+typedef struct ie_dot11WEPDefaultKey {
-+	u16	type;
-+	u16	len;
-+	u8	action;
-+	u8	keySize;
-+	u8	defaultKeyNum;
-+	u8	key[29];	/* check this! was Key[19] */
-+} ACX_PACKED ie_dot11WEPDefaultKey_t;
-+
-+typedef struct acx111WEPDefaultKey {
-+	u8	MacAddr[ETH_ALEN];
-+	u16	action;	/* NOTE: this is a u16, NOT a u8!! */
-+	u16	reserved;
-+	u8	keySize;
-+	u8	type;
-+	u8	index;
-+	u8	defaultKeyNum;
-+	u8	counter[6];
-+	u8	key[32];	/* up to 32 bytes (for TKIP!) */
-+} ACX_PACKED acx111WEPDefaultKey_t;
-+
-+typedef struct ie_dot11WEPDefaultKeyID {
-+	u16	type;
-+	u16	len;
-+	u8	KeyID;
-+} ACX_PACKED ie_dot11WEPDefaultKeyID_t;
-+
-+typedef struct acx100_cmd_wep_mgmt {
-+	u8	MacAddr[ETH_ALEN];
-+	u16	Action;
-+	u16	KeySize;
-+	u8	Key[29]; /* 29*8 == 232bits == WEP256 */
-+} ACX_PACKED acx100_cmd_wep_mgmt_t;
-+
-+typedef struct acx_ie_generic {
-+	u16	type;
-+	u16	len;
-+	union {
-+		/* Association ID IE: just a 16bit value: */
-+		u16	aid;
-+		/* generic member for quick implementation of commands */
-+		u8	bytes[32];
-+	} ACX_PACKED m;
-+} ACX_PACKED acx_ie_generic_t;
-+
-+/***********************************************************************
-+*/
-+#define CHECK_SIZEOF(type,size) { \
-+	extern void BUG_bad_size_for_##type(void); \
-+	if (sizeof(type)!=(size)) BUG_bad_size_for_##type(); \
-+}
-+
-+static inline void
-+acx_struct_size_check(void)
-+{
-+	CHECK_SIZEOF(txdesc_t, 0x30);
-+	CHECK_SIZEOF(acx100_ie_memconfigoption_t, 24);
-+	CHECK_SIZEOF(acx100_ie_queueconfig_t, 0x20);
-+	CHECK_SIZEOF(acx_joinbss_t, 0x30);
-+	/* IEs need 4 bytes for (type,len) tuple */
-+	CHECK_SIZEOF(acx111_ie_configoption_t, ACX111_IE_CONFIG_OPTIONS_LEN + 4);
-+}
-+
-+
-+/***********************************************************************
-+** Global data
-+*/
-+extern const u8 acx_bitpos2ratebyte[];
-+extern const u8 acx_bitpos2rate100[];
-+
-+extern const u8 acx_reg_domain_ids[];
-+extern const char * const acx_reg_domain_strings[];
-+enum {
-+	acx_reg_domain_ids_len = 8
-+};
-+
-+extern const struct iw_handler_def acx_ioctl_handler_def;
-Index: linux-2.6.23/drivers/net/wireless/acx/common.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/common.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,7388 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/proc_fs.h>
-+#include <linux/if_arp.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/wireless.h>
-+#include <linux/pm.h>
-+#include <linux/vmalloc.h>
-+#include <net/iw_handler.h>
-+
-+#include "acx_hw.h"
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+static client_t *acx_l_sta_list_alloc(acx_device_t *adev);
-+static client_t *acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address);
-+
-+static int acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf);
-+static int acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf);
-+/* static int acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala); */
-+static int acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf);
-+static void acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req);
-+static void acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req);
-+static void acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req);
-+static void acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req);
-+static int acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req, const rxbuffer_t *rxbuf);
-+static int acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req);
-+static int acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req);
-+static int acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req);
-+static int acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req);
-+static int acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req);
-+static int acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason);
-+static int acx_l_transmit_authen1(acx_device_t *adev);
-+static int acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req, client_t *clt);
-+static int acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req);
-+static int acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req);
-+static int acx_l_transmit_assoc_req(acx_device_t *adev);
-+
-+
-+/***********************************************************************
-+*/
-+#if ACX_DEBUG
-+unsigned int acx_debug /* will add __read_mostly later */ = ACX_DEFAULT_MSG;
-+/* parameter is 'debug', corresponding var is acx_debug */
-+module_param_named(debug, acx_debug, uint, 0);
-+MODULE_PARM_DESC(debug, "Debug level mask (see L_xxx constants)");
-+#endif
-+
-+#ifdef MODULE_LICENSE
-+MODULE_LICENSE("Dual MPL/GPL");
-+#endif
-+/* USB had this: MODULE_AUTHOR("Martin Wawro <martin.wawro AT uni-dortmund.de>"); */
-+MODULE_AUTHOR("ACX100 Open Source Driver development team");
-+MODULE_DESCRIPTION("Driver for TI ACX1xx based wireless cards (CardBus/PCI/USB)");
-+
-+
-+/***********************************************************************
-+*/
-+/* Probably a number of acx's intermediate buffers for USB transfers,
-+** not to be confused with number of descriptors in tx/rx rings
-+** (which are not directly accessible to host in USB devices) */
-+#define USB_RX_CNT 10
-+#define USB_TX_CNT 10
-+
-+
-+/***********************************************************************
-+*/
-+
-+/* minutes to wait until next radio recalibration: */
-+#define RECALIB_PAUSE	5
-+
-+/* Please keep acx_reg_domain_ids_len in sync... */
-+const u8 acx_reg_domain_ids[acx_reg_domain_ids_len] =
-+	{ 0x10, 0x20, 0x30, 0x31, 0x32, 0x40, 0x41, 0x51 };
-+static const u16 reg_domain_channel_masks[acx_reg_domain_ids_len] =
-+#ifdef ACX_ALLOW_ALLCHANNELS
-+	{ 0x3fff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc };
-+#else
-+	{ 0x07ff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc };
-+#endif
-+const char * const
-+acx_reg_domain_strings[] = {
-+	/* 0 */	" 1-11 FCC (USA)",
-+	/* 1 */	" 1-11 DOC/IC (Canada)",
-+/* BTW: WLAN use in ETSI is regulated by ETSI standard EN 300 328-2 V1.1.2 */
-+	/* 2 */	" 1-13 ETSI (Europe)",
-+	/* 3 */	"10-11 Spain",
-+	/* 4 */	"10-13 France",
-+	/* 5 */	"   14 MKK (Japan)",
-+	/* 6 */	" 1-14 MKK1",
-+	/* 7 */	"  3-9 Israel (not all firmware versions)",
-+	NULL /* needs to remain as last entry */
-+};
-+
-+
-+
-+/***********************************************************************
-+** Debugging support
-+*/
-+#ifdef PARANOID_LOCKING
-+static unsigned max_lock_time;
-+static unsigned max_sem_time;
-+
-+void
-+acx_lock_unhold() { max_lock_time = 0; }
-+void
-+acx_sem_unhold() { max_sem_time = 0; }
-+
-+static inline const char*
-+sanitize_str(const char *s)
-+{
-+	const char* t = strrchr(s, '/');
-+	if (t) return t + 1;
-+	return s;
-+}
-+
-+void
-+acx_lock_debug(acx_device_t *adev, const char* where)
-+{
-+	unsigned int count = 100*1000*1000;
-+	where = sanitize_str(where);
-+	while (--count) {
-+		if (!spin_is_locked(&adev->lock)) break;
-+		cpu_relax();
-+	}
-+	if (!count) {
-+		printk(KERN_EMERG "LOCKUP: already taken at %s!\n", adev->last_lock);
-+		BUG();
-+	}
-+	adev->last_lock = where;
-+	rdtscl(adev->lock_time);
-+}
-+void
-+acx_unlock_debug(acx_device_t *adev, const char* where)
-+{
-+#ifdef SMP
-+	if (!spin_is_locked(&adev->lock)) {
-+		where = sanitize_str(where);
-+		printk(KERN_EMERG "STRAY UNLOCK at %s!\n", where);
-+		BUG();
-+	}
-+#endif
-+	if (acx_debug & L_LOCK) {
-+		unsigned long diff;
-+		rdtscl(diff);
-+		diff -= adev->lock_time;
-+		if (diff > max_lock_time) {
-+			where = sanitize_str(where);
-+			printk("max lock hold time %ld CPU ticks from %s "
-+				"to %s\n", diff, adev->last_lock, where);
-+			max_lock_time = diff;
-+		}
-+	}
-+}
-+void
-+acx_down_debug(acx_device_t *adev, const char* where)
-+{
-+	int sem_count;
-+	unsigned long timeout = jiffies + 5*HZ;
-+
-+	where = sanitize_str(where);
-+
-+	for (;;) {
-+		sem_count = atomic_read(&adev->sem.count);
-+		if (sem_count) break;
-+		if (time_after(jiffies, timeout))
-+			break;
-+		msleep(5);
-+	}
-+	if (!sem_count) {
-+		printk(KERN_EMERG "D STATE at %s! last sem at %s\n",
-+			where, adev->last_sem);
-+		dump_stack();
-+	}
-+	adev->last_sem = where;
-+	adev->sem_time = jiffies;
-+	down(&adev->sem);
-+	if (acx_debug & L_LOCK) {
-+		printk("%s: sem_down %d -> %d\n",
-+			where, sem_count, atomic_read(&adev->sem.count));
-+	}
-+}
-+void
-+acx_up_debug(acx_device_t *adev, const char* where)
-+{
-+	int sem_count = atomic_read(&adev->sem.count);
-+	if (sem_count) {
-+		where = sanitize_str(where);
-+		printk(KERN_EMERG "STRAY UP at %s! sem.count=%d\n", where, sem_count);
-+		dump_stack();
-+	}
-+	if (acx_debug & L_LOCK) {
-+		unsigned long diff = jiffies - adev->sem_time;
-+		if (diff > max_sem_time) {
-+			where = sanitize_str(where);
-+			printk("max sem hold time %ld jiffies from %s "
-+				"to %s\n", diff, adev->last_sem, where);
-+			max_sem_time = diff;
-+		}
-+	}
-+	up(&adev->sem);
-+	if (acx_debug & L_LOCK) {
-+		where = sanitize_str(where);
-+		printk("%s: sem_up %d -> %d\n",
-+			where, sem_count, atomic_read(&adev->sem.count));
-+	}
-+}
-+#endif /* PARANOID_LOCKING */
-+
-+
-+/***********************************************************************
-+*/
-+#if ACX_DEBUG > 1
-+
-+static int acx_debug_func_indent;
-+#define DEBUG_TSC 0
-+#define FUNC_INDENT_INCREMENT 2
-+
-+#if DEBUG_TSC
-+#define TIMESTAMP(d) unsigned long d; rdtscl(d)
-+#else
-+#define TIMESTAMP(d) unsigned long d = jiffies
-+#endif
-+
-+static const char
-+spaces[] = "          " "          "; /* Nx10 spaces */
-+
-+void
-+log_fn_enter(const char *funcname)
-+{
-+	int indent;
-+	TIMESTAMP(d);
-+
-+	indent = acx_debug_func_indent;
-+	if (indent >= sizeof(spaces))
-+		indent = sizeof(spaces)-1;
-+
-+	printk("%08ld %s==> %s\n",
-+		d % 100000000,
-+		spaces + (sizeof(spaces)-1) - indent,
-+		funcname
-+	);
-+
-+	acx_debug_func_indent += FUNC_INDENT_INCREMENT;
-+}
-+void
-+log_fn_exit(const char *funcname)
-+{
-+	int indent;
-+	TIMESTAMP(d);
-+
-+	acx_debug_func_indent -= FUNC_INDENT_INCREMENT;
-+
-+	indent = acx_debug_func_indent;
-+	if (indent >= sizeof(spaces))
-+		indent = sizeof(spaces)-1;
-+
-+	printk("%08ld %s<== %s\n",
-+		d % 100000000,
-+		spaces + (sizeof(spaces)-1) - indent,
-+		funcname
-+	);
-+}
-+void
-+log_fn_exit_v(const char *funcname, int v)
-+{
-+	int indent;
-+	TIMESTAMP(d);
-+
-+	acx_debug_func_indent -= FUNC_INDENT_INCREMENT;
-+
-+	indent = acx_debug_func_indent;
-+	if (indent >= sizeof(spaces))
-+		indent = sizeof(spaces)-1;
-+
-+	printk("%08ld %s<== %s: %08X\n",
-+		d % 100000000,
-+		spaces + (sizeof(spaces)-1) - indent,
-+		funcname,
-+		v
-+	);
-+}
-+#endif /* ACX_DEBUG > 1 */
-+
-+
-+/***********************************************************************
-+** Basically a msleep with logging
-+*/
-+void
-+acx_s_msleep(int ms)
-+{
-+	FN_ENTER;
-+	msleep(ms);
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** Not inlined: it's larger than it seems
-+*/
-+void
-+acx_print_mac(const char *head, const u8 *mac, const char *tail)
-+{
-+	printk("%s"MACSTR"%s", head, MAC(mac), tail);
-+}
-+
-+
-+/***********************************************************************
-+** acx_get_status_name
-+*/
-+static const char*
-+acx_get_status_name(u16 status)
-+{
-+	static const char * const str[] = {
-+		"STOPPED", "SCANNING", "WAIT_AUTH",
-+		"AUTHENTICATED", "ASSOCIATED", "INVALID??"
-+	};
-+	if (status > VEC_SIZE(str)-1)
-+		status = VEC_SIZE(str)-1;
-+
-+	return str[status];
-+}
-+
-+
-+/***********************************************************************
-+** acx_get_packet_type_string
-+*/
-+#if ACX_DEBUG
-+const char*
-+acx_get_packet_type_string(u16 fc)
-+{
-+	static const char * const mgmt_arr[] = {
-+		"MGMT/AssocReq", "MGMT/AssocResp", "MGMT/ReassocReq",
-+		"MGMT/ReassocResp", "MGMT/ProbeReq", "MGMT/ProbeResp",
-+		"MGMT/UNKNOWN", "MGMT/UNKNOWN", "MGMT/Beacon", "MGMT/ATIM",
-+		"MGMT/Disassoc", "MGMT/Authen", "MGMT/Deauthen"
-+	};
-+	static const char * const ctl_arr[] = {
-+		"CTL/PSPoll", "CTL/RTS", "CTL/CTS", "CTL/Ack", "CTL/CFEnd",
-+		"CTL/CFEndCFAck"
-+	};
-+	static const char * const data_arr[] = {
-+		"DATA/DataOnly", "DATA/Data CFAck", "DATA/Data CFPoll",
-+		"DATA/Data CFAck/CFPoll", "DATA/Null", "DATA/CFAck",
-+		"DATA/CFPoll", "DATA/CFAck/CFPoll"
-+	};
-+	const char *str;
-+	u8 fstype = (WF_FC_FSTYPE & fc) >> 4;
-+	u8 ctl;
-+
-+	switch (WF_FC_FTYPE & fc) {
-+	case WF_FTYPE_MGMT:
-+		if (fstype < VEC_SIZE(mgmt_arr))
-+			str = mgmt_arr[fstype];
-+		else
-+			str = "MGMT/UNKNOWN";
-+		break;
-+	case WF_FTYPE_CTL:
-+		ctl = fstype - 0x0a;
-+		if (ctl < VEC_SIZE(ctl_arr))
-+			str = ctl_arr[ctl];
-+		else
-+			str = "CTL/UNKNOWN";
-+		break;
-+	case WF_FTYPE_DATA:
-+		if (fstype < VEC_SIZE(data_arr))
-+			str = data_arr[fstype];
-+		else
-+			str = "DATA/UNKNOWN";
-+		break;
-+	default:
-+		str = "UNKNOWN";
-+		break;
-+	}
-+	return str;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_wlan_reason_str
-+*/
-+static inline const char*
-+acx_wlan_reason_str(u16 reason)
-+{
-+	static const char* const reason_str[] = {
-+	/*  0 */	"?",
-+	/*  1 */	"unspecified",
-+	/*  2 */	"prev auth is not valid",
-+	/*  3 */	"leaving BBS",
-+	/*  4 */	"due to inactivity",
-+	/*  5 */	"AP is busy",
-+	/*  6 */	"got class 2 frame from non-auth'ed STA",
-+	/*  7 */	"got class 3 frame from non-assoc'ed STA",
-+	/*  8 */	"STA has left BSS",
-+	/*  9 */	"assoc without auth is not allowed",
-+	/* 10 */	"bad power setting (802.11h)",
-+	/* 11 */	"bad channel (802.11i)",
-+	/* 12 */	"?",
-+	/* 13 */	"invalid IE",
-+	/* 14 */	"MIC failure",
-+	/* 15 */	"four-way handshake timeout",
-+	/* 16 */	"group key handshake timeout",
-+	/* 17 */	"IE is different",
-+	/* 18 */	"invalid group cipher",
-+	/* 19 */	"invalid pairwise cipher",
-+	/* 20 */	"invalid AKMP",
-+	/* 21 */	"unsupported RSN version",
-+	/* 22 */	"invalid RSN IE cap",
-+	/* 23 */	"802.1x failed",
-+	/* 24 */	"cipher suite rejected"
-+	};
-+	return reason < VEC_SIZE(reason_str) ? reason_str[reason] : "?";
-+}
-+
-+
-+/***********************************************************************
-+** acx_cmd_status_str
-+*/
-+const char*
-+acx_cmd_status_str(unsigned int state)
-+{
-+	static const char * const cmd_error_strings[] = {
-+		"Idle",
-+		"Success",
-+		"Unknown Command",
-+		"Invalid Information Element",
-+		"Channel rejected",
-+		"Channel invalid in current regulatory domain",
-+		"MAC invalid",
-+		"Command rejected (read-only information element)",
-+		"Command rejected",
-+		"Already asleep",
-+		"TX in progress",
-+		"Already awake",
-+		"Write only",
-+		"RX in progress",
-+		"Invalid parameter",
-+		"Scan in progress",
-+		"Failed"
-+	};
-+	return state < VEC_SIZE(cmd_error_strings) ?
-+			cmd_error_strings[state] : "?";
-+}
-+
-+
-+/***********************************************************************
-+** get_status_string
-+*/
-+static inline const char*
-+get_status_string(unsigned int status)
-+{
-+	/* A bit shortened, but hopefully still understandable */
-+	static const char * const status_str[] = {
-+	/* 0 */	"Successful",
-+	/* 1 */	"Unspecified failure",
-+	/* 2 */	"reserved",
-+	/* 3 */	"reserved",
-+	/* 4 */	"reserved",
-+	/* 5 */	"reserved",
-+	/* 6 */	"reserved",
-+	/* 7 */	"reserved",
-+	/* 8 */	"reserved",
-+	/* 9 */	"reserved",
-+	/*10 */	"Cannot support all requested capabilities in Capability Information field",
-+	/*11 */	"Reassoc denied (reason outside of 802.11b scope)",
-+	/*12 */	"Assoc denied (reason outside of 802.11b scope) -- maybe MAC filtering by peer?",
-+	/*13 */	"Responding station doesnt support specified auth algorithm -- maybe WEP auth Open vs. Restricted?",
-+	/*14 */	"Auth rejected: wrong transaction sequence number",
-+	/*15 */	"Auth rejected: challenge failure",
-+	/*16 */	"Auth rejected: timeout for next frame in sequence",
-+	/*17 */	"Assoc denied: too many STAs on this AP",
-+	/*18 */	"Assoc denied: requesting STA doesnt support all data rates in basic set",
-+	/*19 */	"Assoc denied: requesting STA doesnt support Short Preamble",
-+	/*20 */	"Assoc denied: requesting STA doesnt support PBCC Modulation",
-+	/*21 */	"Assoc denied: requesting STA doesnt support Channel Agility"
-+	/*22 */	"reserved",
-+	/*23 */	"reserved",
-+	/*24 */	"reserved",
-+	/*25 */	"Assoc denied: requesting STA doesnt support Short Slot Time",
-+	/*26 */	"Assoc denied: requesting STA doesnt support DSSS-OFDM"
-+	};
-+
-+	return status_str[status < VEC_SIZE(status_str) ? status : 2];
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr)
-+{
-+	if (acx_debug & L_ASSOC) {
-+		int offset = (u8*)ie_ptr - (u8*)hdr;
-+		printk("acx: unknown EID %d in mgmt frame at offset %d. IE: ",
-+				ie_ptr->eid, offset);
-+	/* IE len can be bogus, IE can extend past packet end. Oh well... */
-+		acx_dump_bytes(ie_ptr, ie_ptr->len + 2);
-+		if (acx_debug & L_DATA) {
-+			printk("frame (%s): ",
-+			acx_get_packet_type_string(le16_to_cpu(hdr->fc)));
-+			acx_dump_bytes(hdr, len);
-+		}
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#if ACX_DEBUG
-+void
-+acx_dump_bytes(const void *data, int num)
-+{
-+	const u8* ptr = (const u8*)data;
-+
-+	if (num <= 0) {
-+		printk("\n");
-+		return;
-+	}
-+
-+	while (num >= 16) {
-+		printk( "%02X %02X %02X %02X %02X %02X %02X %02X "
-+			"%02X %02X %02X %02X %02X %02X %02X %02X\n",
-+			ptr[0], ptr[1], ptr[2], ptr[3],
-+			ptr[4], ptr[5], ptr[6], ptr[7],
-+			ptr[8], ptr[9], ptr[10], ptr[11],
-+			ptr[12], ptr[13], ptr[14], ptr[15]);
-+		num -= 16;
-+		ptr += 16;
-+	}
-+	if (num > 0) {
-+		while (--num > 0)
-+			printk("%02X ", *ptr++);
-+		printk("%02X\n", *ptr);
-+	}
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_s_get_firmware_version
-+*/
-+void
-+acx_s_get_firmware_version(acx_device_t *adev)
-+{
-+	fw_ver_t fw;
-+	u8 hexarr[4] = { 0, 0, 0, 0 };
-+	int hexidx = 0, val = 0;
-+	const char *num;
-+	char c;
-+
-+	FN_ENTER;
-+
-+	memset(fw.fw_id, 'E', FW_ID_SIZE);
-+	acx_s_interrogate(adev, &fw, ACX1xx_IE_FWREV);
-+	memcpy(adev->firmware_version, fw.fw_id, FW_ID_SIZE);
-+	adev->firmware_version[FW_ID_SIZE] = '\0';
-+
-+	log(L_DEBUG, "fw_ver: fw_id='%s' hw_id=%08X\n",
-+				adev->firmware_version, fw.hw_id);
-+
-+	if (strncmp(fw.fw_id, "Rev ", 4) != 0) {
-+		printk("acx: strange firmware version string "
-+			"'%s', please report\n", adev->firmware_version);
-+		adev->firmware_numver = 0x01090407; /* assume 1.9.4.7 */
-+	} else {
-+		num = &fw.fw_id[4];
-+		while (1) {
-+			c = *num++;
-+			if ((c == '.') || (c == '\0')) {
-+				hexarr[hexidx++] = val;
-+				if ((hexidx > 3) || (c == '\0')) /* end? */
-+					break;
-+				val = 0;
-+				continue;
-+			}
-+			if ((c >= '0') && (c <= '9'))
-+				c -= '0';
-+			else
-+				c = c - 'a' + (char)10;
-+			val = val*16 + c;
-+		}
-+
-+		adev->firmware_numver = (u32)(
-+				(hexarr[0] << 24) | (hexarr[1] << 16)
-+				| (hexarr[2] << 8) | hexarr[3]);
-+		log(L_DEBUG, "firmware_numver 0x%08X\n", adev->firmware_numver);
-+	}
-+	if (IS_ACX111(adev)) {
-+		if (adev->firmware_numver == 0x00010011) {
-+			/* This one does not survive floodpinging */
-+			printk("acx: firmware '%s' is known to be buggy, "
-+				"please upgrade\n", adev->firmware_version);
-+		}
-+	}
-+
-+	adev->firmware_id = le32_to_cpu(fw.hw_id);
-+
-+	/* we're able to find out more detailed chip names now */
-+	switch (adev->firmware_id & 0xffff0000) {
-+		case 0x01010000:
-+		case 0x01020000:
-+			adev->chip_name = "TNETW1100A";
-+			break;
-+		case 0x01030000:
-+			adev->chip_name = "TNETW1100B";
-+			break;
-+		case 0x03000000:
-+		case 0x03010000:
-+			adev->chip_name = "TNETW1130";
-+			break;
-+		case 0x04030000: /* 0x04030101 is TNETW1450 */
-+			adev->chip_name = "TNETW1450";
-+			break;
-+		default:
-+			printk("acx: unknown chip ID 0x%08X, "
-+				"please report\n", adev->firmware_id);
-+			break;
-+	}
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_display_hardware_details
-+**
-+** Displays hw/fw version, radio type etc...
-+*/
-+void
-+acx_display_hardware_details(acx_device_t *adev)
-+{
-+	const char *radio_str, *form_str;
-+
-+	FN_ENTER;
-+
-+	switch (adev->radio_type) {
-+	case RADIO_MAXIM_0D:
-+		radio_str = "Maxim";
-+		break;
-+	case RADIO_RFMD_11:
-+		radio_str = "RFMD";
-+		break;
-+	case RADIO_RALINK_15:
-+		radio_str = "Ralink";
-+		break;
-+	case RADIO_RADIA_16:
-+		radio_str = "Radia";
-+		break;
-+	case RADIO_UNKNOWN_17:
-+		/* TI seems to have a radio which is
-+		 * additionally 802.11a capable, too */
-+		radio_str = "802.11a/b/g radio?! Please report";
-+		break;
-+	case RADIO_UNKNOWN_19:
-+		radio_str = "A radio used by Safecom cards?! Please report";
-+		break;
-+	case RADIO_UNKNOWN_1B:
-+		radio_str = "An unknown radio used by TNETW1450 USB adapters";
-+		break;
-+	default:
-+		radio_str = "UNKNOWN, please report radio type name!";
-+		break;
-+	}
-+
-+	switch (adev->form_factor) {
-+	case 0x00:
-+		form_str = "unspecified";
-+		break;
-+	case 0x01:
-+		form_str = "(mini-)PCI / CardBus";
-+		break;
-+	case 0x02:
-+		form_str = "USB";
-+		break;
-+	case 0x03:
-+		form_str = "Compact Flash";
-+		break;
-+	default:
-+		form_str = "UNKNOWN, please report";
-+		break;
-+	}
-+
-+	printk("acx: === chipset %s, radio type 0x%02X (%s), "
-+		"form factor 0x%02X (%s), EEPROM version 0x%02X: "
-+		"uploaded firmware '%s' ===\n",
-+		adev->chip_name, adev->radio_type, radio_str,
-+		adev->form_factor, form_str, adev->eeprom_version,
-+		adev->firmware_version);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx_e_change_mtu(struct net_device *ndev, int mtu)
-+{
-+	enum {
-+		MIN_MTU = 256,
-+		MAX_MTU = WLAN_DATA_MAXLEN - (ETH_HLEN)
-+	};
-+
-+	if (mtu < MIN_MTU || mtu > MAX_MTU)
-+		return -EINVAL;
-+
-+	ndev->mtu = mtu;
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_e_get_stats, acx_e_get_wireless_stats
-+*/
-+struct net_device_stats*
-+acx_e_get_stats(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	return &adev->stats;
-+}
-+
-+struct iw_statistics*
-+acx_e_get_wireless_stats(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	return &adev->wstats;
-+}
-+
-+
-+/***********************************************************************
-+** maps acx111 tx descr rate field to acx100 one
-+*/
-+const u8
-+acx_bitpos2rate100[] = {
-+	RATE100_1	,/* 0 */
-+	RATE100_2	,/* 1 */
-+	RATE100_5	,/* 2 */
-+	RATE100_2	,/* 3, should not happen */
-+	RATE100_2	,/* 4, should not happen */
-+	RATE100_11	,/* 5 */
-+	RATE100_2	,/* 6, should not happen */
-+	RATE100_2	,/* 7, should not happen */
-+	RATE100_22	,/* 8 */
-+	RATE100_2	,/* 9, should not happen */
-+	RATE100_2	,/* 10, should not happen */
-+	RATE100_2	,/* 11, should not happen */
-+	RATE100_2	,/* 12, should not happen */
-+	RATE100_2	,/* 13, should not happen */
-+	RATE100_2	,/* 14, should not happen */
-+	RATE100_2	,/* 15, should not happen */
-+};
-+
-+u8
-+acx_rate111to100(u16 r) {
-+	return acx_bitpos2rate100[highest_bit(r)];
-+}
-+
-+
-+/***********************************************************************
-+** Calculate level like the feb 2003 windows driver seems to do
-+*/
-+static u8
-+acx_signal_to_winlevel(u8 rawlevel)
-+{
-+	/* u8 winlevel = (u8) (0.5 + 0.625 * rawlevel); */
-+	u8 winlevel = ((4 + (rawlevel * 5)) / 8);
-+
-+	if (winlevel > 100)
-+		winlevel = 100;
-+	return winlevel;
-+}
-+
-+u8
-+acx_signal_determine_quality(u8 signal, u8 noise)
-+{
-+	int qual;
-+
-+	qual = (((signal - 30) * 100 / 70) + (100 - noise * 4)) / 2;
-+
-+	if (qual > 100)
-+		return 100;
-+	if (qual < 0)
-+		return 0;
-+	return qual;
-+}
-+
-+
-+/***********************************************************************
-+** Interrogate/configure commands
-+*/
-+
-+/* FIXME: the lengths given here probably aren't always correct.
-+ * They should be gradually replaced by proper "sizeof(acx1XX_ie_XXXX)-4",
-+ * unless the firmware actually expects a different length than the struct length */
-+static const u16
-+acx100_ie_len[] = {
-+	0,
-+	ACX100_IE_ACX_TIMER_LEN,
-+	sizeof(acx100_ie_powersave_t)-4, /* is that 6 or 8??? */
-+	ACX1xx_IE_QUEUE_CONFIG_LEN,
-+	ACX100_IE_BLOCK_SIZE_LEN,
-+	ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN,
-+	ACX1xx_IE_RATE_FALLBACK_LEN,
-+	ACX100_IE_WEP_OPTIONS_LEN,
-+	ACX1xx_IE_MEMORY_MAP_LEN, /*	ACX1xx_IE_SSID_LEN, */
-+	0,
-+	ACX1xx_IE_ASSOC_ID_LEN,
-+	0,
-+	ACX111_IE_CONFIG_OPTIONS_LEN,
-+	ACX1xx_IE_FWREV_LEN,
-+	ACX1xx_IE_FCS_ERROR_COUNT_LEN,
-+	ACX1xx_IE_MEDIUM_USAGE_LEN,
-+	ACX1xx_IE_RXCONFIG_LEN,
-+	0,
-+	0,
-+	sizeof(fw_stats_t)-4,
-+	0,
-+	ACX1xx_IE_FEATURE_CONFIG_LEN,
-+	ACX111_IE_KEY_CHOOSE_LEN,
-+	ACX1FF_IE_MISC_CONFIG_TABLE_LEN,
-+	ACX1FF_IE_WONE_CONFIG_LEN,
-+	0,
-+	ACX1FF_IE_TID_CONFIG_LEN,
-+	0,
-+	0,
-+	0,
-+	ACX1FF_IE_CALIB_ASSESSMENT_LEN,
-+	ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN,
-+	ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN,
-+	ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN,
-+	0,
-+	ACX1FF_IE_PACKET_DETECT_THRESH_LEN,
-+	ACX1FF_IE_TX_CONFIG_OPTIONS_LEN,
-+	ACX1FF_IE_CCA_THRESHOLD_LEN,
-+	ACX1FF_IE_EVENT_MASK_LEN,
-+	ACX1FF_IE_DTIM_PERIOD_LEN,
-+	0,
-+	ACX1FF_IE_ACI_CONFIG_SET_LEN,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	ACX1FF_IE_EEPROM_VER_LEN,
-+};
-+
-+static const u16
-+acx100_ie_len_dot11[] = {
-+	0,
-+	ACX1xx_IE_DOT11_STATION_ID_LEN,
-+	0,
-+	ACX100_IE_DOT11_BEACON_PERIOD_LEN,
-+	ACX1xx_IE_DOT11_DTIM_PERIOD_LEN,
-+	ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN,
-+	ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN,
-+	ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN,
-+	ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN,
-+	0,
-+	ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN,
-+	ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN,
-+	0,
-+	ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN,
-+	ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN,
-+	ACX100_IE_DOT11_ED_THRESHOLD_LEN,
-+	ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN,
-+	0,
-+	0,
-+	0,
-+};
-+
-+static const u16
-+acx111_ie_len[] = {
-+	0,
-+	ACX100_IE_ACX_TIMER_LEN,
-+	sizeof(acx111_ie_powersave_t)-4,
-+	ACX1xx_IE_QUEUE_CONFIG_LEN,
-+	ACX100_IE_BLOCK_SIZE_LEN,
-+	ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN,
-+	ACX1xx_IE_RATE_FALLBACK_LEN,
-+	ACX100_IE_WEP_OPTIONS_LEN,
-+	ACX1xx_IE_MEMORY_MAP_LEN, /*	ACX1xx_IE_SSID_LEN, */
-+	0,
-+	ACX1xx_IE_ASSOC_ID_LEN,
-+	0,
-+	ACX111_IE_CONFIG_OPTIONS_LEN,
-+	ACX1xx_IE_FWREV_LEN,
-+	ACX1xx_IE_FCS_ERROR_COUNT_LEN,
-+	ACX1xx_IE_MEDIUM_USAGE_LEN,
-+	ACX1xx_IE_RXCONFIG_LEN,
-+	0,
-+	0,
-+	sizeof(fw_stats_t)-4,
-+	0,
-+	ACX1xx_IE_FEATURE_CONFIG_LEN,
-+	ACX111_IE_KEY_CHOOSE_LEN,
-+	ACX1FF_IE_MISC_CONFIG_TABLE_LEN,
-+	ACX1FF_IE_WONE_CONFIG_LEN,
-+	0,
-+	ACX1FF_IE_TID_CONFIG_LEN,
-+	0,
-+	0,
-+	0,
-+	ACX1FF_IE_CALIB_ASSESSMENT_LEN,
-+	ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN,
-+	ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN,
-+	ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN,
-+	0,
-+	ACX1FF_IE_PACKET_DETECT_THRESH_LEN,
-+	ACX1FF_IE_TX_CONFIG_OPTIONS_LEN,
-+	ACX1FF_IE_CCA_THRESHOLD_LEN,
-+	ACX1FF_IE_EVENT_MASK_LEN,
-+	ACX1FF_IE_DTIM_PERIOD_LEN,
-+	0,
-+	ACX1FF_IE_ACI_CONFIG_SET_LEN,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	ACX1FF_IE_EEPROM_VER_LEN,
-+};
-+
-+static const u16
-+acx111_ie_len_dot11[] = {
-+	0,
-+	ACX1xx_IE_DOT11_STATION_ID_LEN,
-+	0,
-+	ACX100_IE_DOT11_BEACON_PERIOD_LEN,
-+	ACX1xx_IE_DOT11_DTIM_PERIOD_LEN,
-+	ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN,
-+	ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN,
-+	ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN,
-+	ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN,
-+	0,
-+	ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN,
-+	ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN,
-+	0,
-+	ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN,
-+	ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN,
-+	ACX100_IE_DOT11_ED_THRESHOLD_LEN,
-+	ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN,
-+	0,
-+	0,
-+	0,
-+};
-+
-+
-+#undef FUNC
-+#define FUNC "configure"
-+#if !ACX_DEBUG
-+int
-+acx_s_configure(acx_device_t *adev, void *pdr, int type)
-+{
-+#else
-+int
-+acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* typestr)
-+{
-+#endif
-+	u16 len;
-+	int res;
-+
-+	if (type < 0x1000)
-+		len = adev->ie_len[type];
-+	else
-+		len = adev->ie_len_dot11[type - 0x1000];
-+
-+	log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len);
-+	if (unlikely(!len)) {
-+		log(L_DEBUG, "zero-length type %s?!\n", typestr);
-+	}
-+
-+	((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type);
-+	((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len);
-+	res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIGURE, pdr, len + 4);
-+	if (unlikely(OK != res)) {
-+#if ACX_DEBUG
-+		printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr);
-+#else
-+		printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type);
-+#endif
-+		/* dump_stack() is already done in issue_cmd() */
-+	}
-+	return res;
-+}
-+
-+#undef FUNC
-+#define FUNC "interrogate"
-+#if !ACX_DEBUG
-+int
-+acx_s_interrogate(acx_device_t *adev, void *pdr, int type)
-+{
-+#else
-+int
-+acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type,
-+		const char* typestr)
-+{
-+#endif
-+	u16 len;
-+	int res;
-+
-+	/* FIXME: no check whether this exceeds the array yet.
-+	 * We should probably remember the number of entries... */
-+	if (type < 0x1000)
-+		len = adev->ie_len[type];
-+	else
-+		len = adev->ie_len_dot11[type-0x1000];
-+
-+	log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len);
-+
-+	((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type);
-+	((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len);
-+	res = acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, pdr, len + 4);
-+	if (unlikely(OK != res)) {
-+#if ACX_DEBUG
-+		printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr);
-+#else
-+		printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type);
-+#endif
-+		/* dump_stack() is already done in issue_cmd() */
-+	}
-+	return res;
-+}
-+
-+#if CMD_DISCOVERY
-+void
-+great_inquisitor(acx_device_t *adev)
-+{
-+	static struct {
-+		u16	type;
-+		u16	len;
-+		/* 0x200 was too large here: */
-+		u8	data[0x100 - 4];
-+	} ACX_PACKED ie;
-+	u16 type;
-+
-+	FN_ENTER;
-+
-+	/* 0..0x20, 0x1000..0x1020 */
-+	for (type = 0; type <= 0x1020; type++) {
-+		if (type == 0x21)
-+			type = 0x1000;
-+		ie.type = cpu_to_le16(type);
-+		ie.len = cpu_to_le16(sizeof(ie) - 4);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, &ie, sizeof(ie));
-+	}
-+	FN_EXIT0;
-+}
-+#endif
-+
-+
-+#ifdef CONFIG_PROC_FS
-+/***********************************************************************
-+** /proc files
-+*/
-+/***********************************************************************
-+** acx_l_proc_output
-+** Generate content for our /proc entry
-+**
-+** Arguments:
-+**	buf is a pointer to write output to
-+**	adev is the usual pointer to our private struct acx_device
-+** Returns:
-+**	number of bytes actually written to buf
-+** Side effects:
-+**	none
-+*/
-+static int
-+acx_l_proc_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	p += sprintf(p,
-+		"acx driver version:\t\t" ACX_RELEASE "\n"
-+		"Wireless extension version:\t" STRING(WIRELESS_EXT) "\n"
-+		"chip name:\t\t\t%s (0x%08X)\n"
-+		"radio type:\t\t\t0x%02X\n"
-+		"form factor:\t\t\t0x%02X\n"
-+		"EEPROM version:\t\t\t0x%02X\n"
-+		"firmware version:\t\t%s (0x%08X)\n",
-+		adev->chip_name, adev->firmware_id,
-+		adev->radio_type,
-+		adev->form_factor,
-+		adev->eeprom_version,
-+		adev->firmware_version, adev->firmware_numver);
-+
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		struct client *bss = &adev->sta_list[i];
-+		if (!bss->used) continue;
-+		p += sprintf(p, "BSS %u BSSID "MACSTR" ESSID %s channel %u "
-+			"Cap 0x%X SIR %u SNR %u\n",
-+			i, MAC(bss->bssid), (char*)bss->essid, bss->channel,
-+			bss->cap_info, bss->sir, bss->snr);
-+	}
-+	p += sprintf(p, "status:\t\t\t%u (%s)\n",
-+			adev->status, acx_get_status_name(adev->status));
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_s_proc_diag_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	unsigned long flags;
-+	unsigned int len = 0, partlen;
-+	u32 temp1, temp2;
-+	u8 *st, *st_end;
-+#ifdef __BIG_ENDIAN
-+	u8 *st2;
-+#endif
-+	fw_stats_t *fw_stats;
-+	char *part_str = NULL;
-+	fw_stats_tx_t *tx = NULL;
-+	fw_stats_rx_t *rx = NULL;
-+	fw_stats_dma_t *dma = NULL;
-+	fw_stats_irq_t *irq = NULL;
-+	fw_stats_wep_t *wep = NULL;
-+	fw_stats_pwr_t *pwr = NULL;
-+	fw_stats_mic_t *mic = NULL;
-+	fw_stats_aes_t *aes = NULL;
-+	fw_stats_event_t *evt = NULL;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+#if defined (ACX_MEM)
-+	p = acxmem_s_proc_diag_output(p, adev);
-+#else
-+	if (IS_PCI(adev))
-+		p = acxpci_s_proc_diag_output(p, adev);
-+#endif
-+
-+	p += sprintf(p,
-+		"\n"
-+		"** network status **\n"
-+		"dev_state_mask 0x%04X\n"
-+		"status %u (%s), "
-+		"mode %u, channel %u, "
-+		"reg_dom_id 0x%02X, reg_dom_chanmask 0x%04X, ",
-+		adev->dev_state_mask,
-+		adev->status, acx_get_status_name(adev->status),
-+		adev->mode, adev->channel,
-+		adev->reg_dom_id, adev->reg_dom_chanmask
-+		);
-+	p += sprintf(p,
-+		"ESSID \"%s\", essid_active %d, essid_len %d, "
-+		"essid_for_assoc \"%s\", nick \"%s\"\n"
-+		"WEP ena %d, restricted %d, idx %d\n",
-+		adev->essid, adev->essid_active, (int)adev->essid_len,
-+		adev->essid_for_assoc, adev->nick,
-+		adev->wep_enabled, adev->wep_restricted,
-+		adev->wep_current_index);
-+	p += sprintf(p, "dev_addr  "MACSTR"\n", MAC(adev->dev_addr));
-+	p += sprintf(p, "bssid     "MACSTR"\n", MAC(adev->bssid));
-+	p += sprintf(p, "ap_filter "MACSTR"\n", MAC(adev->ap));
-+
-+	p += sprintf(p,
-+		"\n"
-+		"** PHY status **\n"
-+		"tx_disabled %d, tx_level_dbm %d\n" /* "tx_level_val %d, tx_level_auto %d\n" */
-+		"sensitivity %d, antenna 0x%02X, ed_threshold %d, cca %d, preamble_mode %d\n"
-+		"rate_basic 0x%04X, rate_oper 0x%04X\n"
-+		"rts_threshold %d, frag_threshold %d, short_retry %d, long_retry %d\n"
-+		"msdu_lifetime %d, listen_interval %d, beacon_interval %d\n",
-+		adev->tx_disabled, adev->tx_level_dbm, /* adev->tx_level_val, adev->tx_level_auto, */
-+		adev->sensitivity, adev->antenna, adev->ed_threshold, adev->cca, adev->preamble_mode,
-+		adev->rate_basic, adev->rate_oper,
-+		adev->rts_threshold, adev->frag_threshold, adev->short_retry, adev->long_retry,
-+		adev->msdu_lifetime, adev->listen_interval, adev->beacon_interval);
-+
-+	acx_unlock(adev, flags);
-+
-+	p += sprintf(p,
-+		"\n"
-+		"** Firmware **\n"
-+		"NOTE: version dependent statistics layout, "
-+		"please report if you suspect wrong parsing!\n"
-+		"\n"
-+		"version \"%s\"\n", adev->firmware_version);
-+
-+	/* TODO: may replace kmalloc/memset with kzalloc once
-+	 * Linux 2.6.14 is widespread */
-+	fw_stats = kmalloc(sizeof(*fw_stats), GFP_KERNEL);
-+	if (!fw_stats) {
-+		FN_EXIT1(0);
-+		return 0;
-+	}
-+	memset(fw_stats, 0, sizeof(*fw_stats));
-+
-+	st = (u8 *)fw_stats;
-+
-+	part_str = "statistics query command";
-+
-+	if (OK != acx_s_interrogate(adev, st, ACX1xx_IE_FIRMWARE_STATISTICS))
-+		goto fw_stats_end;
-+
-+	st += sizeof(u16);
-+	len = *(u16 *)st;
-+
-+	if (len > sizeof(*fw_stats)) {
-+		p += sprintf(p,
-+			"firmware version with bigger fw_stats struct detected\n"
-+			"(%u vs. %u), please report\n", len, sizeof(fw_stats_t));
-+		if (len > sizeof(*fw_stats)) {
-+			p += sprintf(p, "struct size exceeded allocation!\n");
-+			len = sizeof(*fw_stats);
-+		}
-+	}
-+	st += sizeof(u16);
-+	st_end = st - 2*sizeof(u16) + len;
-+
-+#ifdef __BIG_ENDIAN
-+	/* let's make one bold assumption here:
-+	 * (hopefully!) *all* statistics fields are u32 only,
-+	 * thus if we need to make endianness corrections
-+	 * we can simply do them in one go, in advance */
-+	st2 = (u8 *)fw_stats;
-+	for (temp1 = 0; temp1 < len; temp1 += 4, st2 += 4)
-+		*(u32 *)st2 = le32_to_cpu(*(u32 *)st2);
-+#endif
-+
-+	part_str = "Rx/Tx";
-+
-+	/* directly at end of a struct part? --> no error! */
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	tx = (fw_stats_tx_t *)st;
-+	st += sizeof(fw_stats_tx_t);
-+	rx = (fw_stats_rx_t *)st;
-+	st += sizeof(fw_stats_rx_t);
-+	partlen = sizeof(fw_stats_tx_t) + sizeof(fw_stats_rx_t);
-+
-+	if (IS_ACX100(adev)) {
-+		/* at least ACX100 PCI F/W 1.9.8.b
-+		 * and ACX100 USB F/W 1.0.7-USB
-+		 * don't have those two fields... */
-+		st -= 2*sizeof(u32);
-+
-+		/* our parsing doesn't quite match this firmware yet,
-+		 * log failure */
-+		if (st > st_end)
-+			goto fw_stats_fail;
-+		temp1 = temp2 = 999999999;
-+	} else {
-+		if (st > st_end)
-+			goto fw_stats_fail;
-+		temp1 = rx->rx_aci_events;
-+		temp2 = rx->rx_aci_resets;
-+	}
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  tx_desc_overfl %u\n"
-+		"  rx_OutOfMem %u, rx_hdr_overfl %u, rx_hw_stuck %u\n"
-+		"  rx_dropped_frame %u, rx_frame_ptr_err %u, rx_xfr_hint_trig %u\n"
-+		"  rx_aci_events %u, rx_aci_resets %u\n",
-+		part_str,
-+		tx->tx_desc_of,
-+		rx->rx_oom,
-+		rx->rx_hdr_of,
-+		rx->rx_hw_stuck,
-+		rx->rx_dropped_frame,
-+		rx->rx_frame_ptr_err,
-+		rx->rx_xfr_hint_trig,
-+		temp1,
-+		temp2);
-+
-+	part_str = "DMA";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	dma = (fw_stats_dma_t *)st;
-+	partlen = sizeof(fw_stats_dma_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  rx_dma_req %u, rx_dma_err %u, tx_dma_req %u, tx_dma_err %u\n",
-+		part_str,
-+		dma->rx_dma_req,
-+		dma->rx_dma_err,
-+		dma->tx_dma_req,
-+		dma->tx_dma_err);
-+
-+	part_str = "IRQ";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	irq = (fw_stats_irq_t *)st;
-+	partlen = sizeof(fw_stats_irq_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  cmd_cplt %u, fiq %u\n"
-+		"  rx_hdrs %u, rx_cmplt %u, rx_mem_overfl %u, rx_rdys %u\n"
-+		"  irqs %u, tx_procs %u, decrypt_done %u\n"
-+		"  dma_0_done %u, dma_1_done %u, tx_exch_complet %u\n"
-+		"  commands %u, rx_procs %u, hw_pm_mode_changes %u\n"
-+		"  host_acks %u, pci_pm %u, acm_wakeups %u\n",
-+		part_str,
-+		irq->cmd_cplt,
-+		irq->fiq,
-+		irq->rx_hdrs,
-+		irq->rx_cmplt,
-+		irq->rx_mem_of,
-+		irq->rx_rdys,
-+		irq->irqs,
-+		irq->tx_procs,
-+		irq->decrypt_done,
-+		irq->dma_0_done,
-+		irq->dma_1_done,
-+		irq->tx_exch_complet,
-+		irq->commands,
-+		irq->rx_procs,
-+		irq->hw_pm_mode_changes,
-+		irq->host_acks,
-+		irq->pci_pm,
-+		irq->acm_wakeups);
-+
-+	part_str = "WEP";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	wep = (fw_stats_wep_t *)st;
-+	partlen = sizeof(fw_stats_wep_t);
-+	st += partlen;
-+
-+	if (
-+	    (IS_PCI(adev) && IS_ACX100(adev))
-+	||  (IS_USB(adev) && IS_ACX100(adev))
-+	||  (IS_MEM(adev) && IS_ACX100(adev))
-+	) {
-+		/* at least ACX100 PCI F/W 1.9.8.b,
-+		 * ACX100 USB F/W 1.0.7-USB
-+		 * and ACX100 Generic Slave F/W 1.10.7.K
-+		 * don't have those two fields...
-+		 */
-+		st -= 2*sizeof(u32);
-+		if (st > st_end)
-+			goto fw_stats_fail;
-+		temp1 = temp2 = 999999999;
-+	} else {
-+		if (st > st_end)
-+			goto fw_stats_fail;
-+		temp1 = wep->wep_pkt_decrypt;
-+		temp2 = wep->wep_decrypt_irqs;
-+	}
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  wep_key_count %u, wep_default_key_count %u, dot11_def_key_mib %u\n"
-+		"  wep_key_not_found %u, wep_decrypt_fail %u\n"
-+		"  wep_pkt_decrypt %u, wep_decrypt_irqs %u\n",
-+		part_str,
-+		wep->wep_key_count,
-+		wep->wep_default_key_count,
-+		wep->dot11_def_key_mib,
-+		wep->wep_key_not_found,
-+		wep->wep_decrypt_fail,
-+		temp1,
-+		temp2);
-+
-+	part_str = "power";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	pwr = (fw_stats_pwr_t *)st;
-+	partlen = sizeof(fw_stats_pwr_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  tx_start_ctr %u, no_ps_tx_too_short %u\n"
-+		"  rx_start_ctr %u, no_ps_rx_too_short %u\n"
-+		"  lppd_started %u\n"
-+		"  no_lppd_too_noisy %u, no_lppd_too_short %u, no_lppd_matching_frame %u\n",
-+		part_str,
-+		pwr->tx_start_ctr,
-+		pwr->no_ps_tx_too_short,
-+		pwr->rx_start_ctr,
-+		pwr->no_ps_rx_too_short,
-+		pwr->lppd_started,
-+		pwr->no_lppd_too_noisy,
-+		pwr->no_lppd_too_short,
-+		pwr->no_lppd_matching_frame);
-+
-+	part_str = "MIC";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	mic = (fw_stats_mic_t *)st;
-+	partlen = sizeof(fw_stats_mic_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  mic_rx_pkts %u, mic_calc_fail %u\n",
-+		part_str,
-+		mic->mic_rx_pkts,
-+		mic->mic_calc_fail);
-+
-+	part_str = "AES";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	aes = (fw_stats_aes_t *)st;
-+	partlen = sizeof(fw_stats_aes_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  aes_enc_fail %u, aes_dec_fail %u\n"
-+		"  aes_enc_pkts %u, aes_dec_pkts %u\n"
-+		"  aes_enc_irq %u, aes_dec_irq %u\n",
-+		part_str,
-+		aes->aes_enc_fail,
-+		aes->aes_dec_fail,
-+		aes->aes_enc_pkts,
-+		aes->aes_dec_pkts,
-+		aes->aes_enc_irq,
-+		aes->aes_dec_irq);
-+
-+	part_str = "event";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	evt = (fw_stats_event_t *)st;
-+	partlen = sizeof(fw_stats_event_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  heartbeat %u, calibration %u\n"
-+		"  rx_mismatch %u, rx_mem_empty %u, rx_pool %u\n"
-+		"  oom_late %u\n"
-+		"  phy_tx_err %u, tx_stuck %u\n",
-+		part_str,
-+		evt->heartbeat,
-+		evt->calibration,
-+		evt->rx_mismatch,
-+		evt->rx_mem_empty,
-+		evt->rx_pool,
-+		evt->oom_late,
-+		evt->phy_tx_err,
-+		evt->tx_stuck);
-+
-+	if (st < st_end)
-+		goto fw_stats_bigger;
-+
-+	goto fw_stats_end;
-+
-+fw_stats_fail:
-+	st -= partlen;
-+	p += sprintf(p,
-+		"failed at %s part (size %u), offset %u (struct size %u), "
-+		"please report\n", part_str, partlen,
-+		(int)st - (int)fw_stats, len);
-+
-+fw_stats_bigger:
-+	for (; st < st_end; st += 4)
-+		p += sprintf(p,
-+			"UNKN%3d: %u\n", (int)st - (int)fw_stats, *(u32 *)st);
-+
-+fw_stats_end:
-+	kfree(fw_stats);
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_s_proc_phy_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/*
-+	if (RADIO_RFMD_11 != adev->radio_type) {
-+		printk("sorry, not yet adapted for radio types "
-+			"other than RFMD, please verify "
-+			"PHY size etc. first!\n");
-+		goto end;
-+	}
-+	*/
-+
-+	/* The PHY area is only 0x80 bytes long; further pages after that
-+	 * only have some page number registers with altered value,
-+	 * all other registers remain the same. */
-+	for (i = 0; i < 0x80; i++) {
-+		acx_s_read_phy_reg(adev, i, p++);
-+	}
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+** acx_e_read_proc_XXXX
-+** Handle our /proc entry
-+**
-+** Arguments:
-+**	standard kernel read_proc interface
-+** Returns:
-+**	number of bytes written to buf
-+** Side effects:
-+**	none
-+*/
-+static int
-+acx_e_read_proc(char *buf, char **start, off_t offset, int count,
-+		     int *eof, void *data)
-+{
-+	acx_device_t *adev = (acx_device_t*)data;
-+	unsigned long flags;
-+	int length;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+	/* fill buf */
-+	length = acx_l_proc_output(buf, adev);
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+
-+	/* housekeeping */
-+	if (length <= offset + count)
-+		*eof = 1;
-+	*start = buf + offset;
-+	length -= offset;
-+	if (length > count)
-+		length = count;
-+	if (length < 0)
-+		length = 0;
-+	FN_EXIT1(length);
-+	return length;
-+}
-+
-+static char _buf[32768];
-+static int
-+acx_e_read_proc_diag(char *buf, char **start, off_t offset, int count,
-+		     int *eof, void *data)
-+{
-+	acx_device_t *adev = (acx_device_t*)data;
-+	int length;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+	/* fill buf */
-+	length = acx_s_proc_diag_output(_buf, adev);
-+	acx_sem_unlock(adev);
-+
-+	memcpy(buf, _buf + offset, count);
-+
-+	/* housekeeping */
-+	if (length <= offset + count)
-+		*eof = 1;
-+	*start = count;
-+	length -= offset;
-+	if (length > count)
-+		length = count;
-+	if (length < 0)
-+		length = 0;
-+	FN_EXIT1(length);
-+	return length;
-+}
-+
-+static int
-+acx_e_read_proc_eeprom(char *buf, char **start, off_t offset, int count,
-+		     int *eof, void *data)
-+{
-+	acx_device_t *adev = (acx_device_t*)data;
-+	int length;
-+
-+	FN_ENTER;
-+
-+	/* fill buf */
-+	length = 0;
-+#if defined (ACX_MEM)
-+		acx_sem_lock(adev);
-+		length = acxmem_proc_eeprom_output(buf, adev);
-+		acx_sem_unlock(adev);
-+#else
-+	if (IS_PCI(adev)) {
-+		acx_sem_lock(adev);
-+		length = acxpci_proc_eeprom_output(buf, adev);
-+		acx_sem_unlock(adev);
-+	}
-+#endif
-+
-+	/* housekeeping */
-+	if (length <= offset + count)
-+		*eof = 1;
-+	*start = buf + offset;
-+	length -= offset;
-+	if (length > count)
-+		length = count;
-+	if (length < 0)
-+		length = 0;
-+	FN_EXIT1(length);
-+	return length;
-+}
-+
-+static int
-+acx_e_read_proc_phy(char *buf, char **start, off_t offset, int count,
-+		     int *eof, void *data)
-+{
-+	acx_device_t *adev = (acx_device_t*)data;
-+	int length;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+	/* fill buf */
-+	length = acx_s_proc_phy_output(buf, adev);
-+	acx_sem_unlock(adev);
-+
-+	/* housekeeping */
-+	if (length <= offset + count)
-+		*eof = 1;
-+	*start = buf + offset;
-+	length -= offset;
-+	if (length > count)
-+		length = count;
-+	if (length < 0)
-+		length = 0;
-+	FN_EXIT1(length);
-+	return length;
-+}
-+
-+
-+/***********************************************************************
-+** /proc files registration
-+*/
-+static const char * const
-+proc_files[] = { "", "_diag", "_eeprom", "_phy" };
-+
-+static read_proc_t * const
-+proc_funcs[] = {
-+	acx_e_read_proc,
-+	acx_e_read_proc_diag,
-+	acx_e_read_proc_eeprom,
-+	acx_e_read_proc_phy
-+};
-+
-+static int
-+manage_proc_entries(const struct net_device *ndev, int remove)
-+{
-+	acx_device_t *adev = ndev2adev((struct net_device *)ndev);
-+	char procbuf[80];
-+	int i;
-+
-+	for (i = 0; i < VEC_SIZE(proc_files); i++)	{
-+		snprintf(procbuf, sizeof(procbuf),
-+			"driver/acx_%s%s", ndev->name, proc_files[i]);
-+		log(L_INIT, "%sing /proc entry %s\n",
-+			remove ? "remov" : "creat", procbuf);
-+		if (!remove) {
-+			if (!create_proc_read_entry(procbuf, 0, 0, proc_funcs[i], adev)) {
-+				printk("acx: cannot register /proc entry %s\n", procbuf);
-+				return NOT_OK;
-+			}
-+		} else {
-+			remove_proc_entry(procbuf, NULL);
-+		}
-+	}
-+	return OK;
-+}
-+
-+int
-+acx_proc_register_entries(const struct net_device *ndev)
-+{
-+	return manage_proc_entries(ndev, 0);
-+}
-+
-+int
-+acx_proc_unregister_entries(const struct net_device *ndev)
-+{
-+	return manage_proc_entries(ndev, 1);
-+}
-+#endif /* CONFIG_PROC_FS */
-+
-+
-+/***********************************************************************
-+** acx_cmd_join_bssid
-+**
-+** Common code for both acx100 and acx111.
-+*/
-+/* NB: does NOT match RATE100_nn but matches ACX[111]_SCAN_RATE_n */
-+static const u8
-+bitpos2genframe_txrate[] = {
-+	10,	/*  0.  1 Mbit/s */
-+	20,	/*  1.  2 Mbit/s */
-+	55,	/*  2.  5.5 Mbit/s */
-+	0x0B,	/*  3.  6 Mbit/s */
-+	0x0F,	/*  4.  9 Mbit/s */
-+	110,	/*  5. 11 Mbit/s */
-+	0x0A,	/*  6. 12 Mbit/s */
-+	0x0E,	/*  7. 18 Mbit/s */
-+	220,	/*  8. 22 Mbit/s */
-+	0x09,	/*  9. 24 Mbit/s */
-+	0x0D,	/* 10. 36 Mbit/s */
-+	0x08,	/* 11. 48 Mbit/s */
-+	0x0C,	/* 12. 54 Mbit/s */
-+	10,	/* 13.  1 Mbit/s, should never happen */
-+	10,	/* 14.  1 Mbit/s, should never happen */
-+	10,	/* 15.  1 Mbit/s, should never happen */
-+};
-+
-+/* Looks scary, eh?
-+** Actually, each one compiled into one AND and one SHIFT,
-+** 31 bytes in x86 asm (more if uints are replaced by u16/u8) */
-+static inline unsigned int
-+rate111to5bits(unsigned int rate)
-+{
-+	return (rate & 0x7)
-+	| ( (rate & RATE111_11) / (RATE111_11/JOINBSS_RATES_11) )
-+	| ( (rate & RATE111_22) / (RATE111_22/JOINBSS_RATES_22) )
-+	;
-+}
-+
-+static void
-+acx_s_cmd_join_bssid(acx_device_t *adev, const u8 *bssid)
-+{
-+	acx_joinbss_t tmp;
-+	int dtim_interval;
-+	int i;
-+
-+	if (mac_is_zero(bssid))
-+		return;
-+
-+	FN_ENTER;
-+
-+	dtim_interval =	(ACX_MODE_0_ADHOC == adev->mode) ?
-+			1 : adev->dtim_interval;
-+
-+	memset(&tmp, 0, sizeof(tmp));
-+
-+	for (i = 0; i < ETH_ALEN; i++) {
-+		tmp.bssid[i] = bssid[ETH_ALEN-1 - i];
-+	}
-+
-+	tmp.beacon_interval = cpu_to_le16(adev->beacon_interval);
-+
-+	/* Basic rate set. Control frame responses (such as ACK or CTS frames)
-+	** are sent with one of these rates */
-+	if (IS_ACX111(adev)) {
-+		/* It was experimentally determined that rates_basic
-+		** can take 11g rates as well, not only rates
-+		** defined with JOINBSS_RATES_BASIC111_nnn.
-+		** Just use RATE111_nnn constants... */
-+		tmp.u.acx111.dtim_interval = dtim_interval;
-+		tmp.u.acx111.rates_basic = cpu_to_le16(adev->rate_basic);
-+		log(L_ASSOC, "rates_basic:%04X, rates_supported:%04X\n",
-+			adev->rate_basic, adev->rate_oper);
-+	} else {
-+		tmp.u.acx100.dtim_interval = dtim_interval;
-+		tmp.u.acx100.rates_basic = rate111to5bits(adev->rate_basic);
-+		tmp.u.acx100.rates_supported = rate111to5bits(adev->rate_oper);
-+		log(L_ASSOC, "rates_basic:%04X->%02X, "
-+			"rates_supported:%04X->%02X\n",
-+			adev->rate_basic, tmp.u.acx100.rates_basic,
-+			adev->rate_oper, tmp.u.acx100.rates_supported);
-+	}
-+
-+	/* Setting up how Beacon, Probe Response, RTS, and PS-Poll frames
-+	** will be sent (rate/modulation/preamble) */
-+	tmp.u.txrate.genfrm_txrate = bitpos2genframe_txrate[lowest_bit(adev->rate_basic)];
-+	tmp.genfrm_mod_pre = 0; /* FIXME: was = adev->capab_short (which was always 0); */
-+	/* we can use short pre *if* all peers can understand it */
-+	/* FIXME #2: we need to correctly set PBCC/OFDM bits here too */
-+
-+	/* we switch fw to STA mode in MONITOR mode, it seems to be
-+	** the only mode where fw does not emit beacons by itself
-+	** but allows us to send anything (we really want to retain
-+	** ability to tx arbitrary frames in MONITOR mode)
-+	*/
-+	tmp.macmode = (adev->mode != ACX_MODE_MONITOR ? adev->mode : ACX_MODE_2_STA);
-+	tmp.channel = adev->channel;
-+	tmp.essid_len = adev->essid_len;
-+	/* NOTE: the code memcpy'd essid_len + 1 before, which is WRONG! */
-+	memcpy(tmp.essid, adev->essid, tmp.essid_len);
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_JOIN, &tmp, tmp.essid_len + 0x11);
-+
-+	log(L_ASSOC|L_DEBUG, "BSS_Type = %u\n", tmp.macmode);
-+	acxlog_mac(L_ASSOC|L_DEBUG, "JoinBSSID MAC:", adev->bssid, "\n");
-+
-+	acx_update_capabilities(adev);
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_cmd_start_scan
-+**
-+** Issue scan command to the hardware
-+**
-+** unified function for both ACX111 and ACX100
-+*/
-+static void
-+acx_s_scan_chan(acx_device_t *adev)
-+{
-+	union {
-+		acx111_scan_t acx111;
-+		acx100_scan_t acx100;
-+	} s;
-+
-+	FN_ENTER;
-+
-+	memset(&s, 0, sizeof(s));
-+
-+	/* first common positions... */
-+
-+	s.acx111.count = cpu_to_le16(adev->scan_count);
-+	s.acx111.rate = adev->scan_rate;
-+	s.acx111.options = adev->scan_mode;
-+	s.acx111.chan_duration = cpu_to_le16(adev->scan_duration);
-+	s.acx111.max_probe_delay = cpu_to_le16(adev->scan_probe_delay);
-+
-+	/* ...then differences */
-+
-+	if (IS_ACX111(adev)) {
-+		s.acx111.channel_list_select = 0; /* scan every allowed channel */
-+		/*s.acx111.channel_list_select = 1;*/ /* scan given channels */
-+		/*s.acx111.modulation = 0x40;*/ /* long preamble? OFDM? -> only for active scan */
-+		s.acx111.modulation = 0;
-+		/*s.acx111.channel_list[0] = 6;
-+		s.acx111.channel_list[1] = 4;*/
-+	} else {
-+		s.acx100.start_chan = cpu_to_le16(1);
-+		s.acx100.flags = cpu_to_le16(0x8000);
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SCAN, &s, sizeof(s));
-+	FN_EXIT0;
-+}
-+
-+
-+void
-+acx_s_cmd_start_scan(acx_device_t *adev)
-+{
-+	/* time_before check is 'just in case' thing */
-+	if (!(adev->irq_status & HOST_INT_SCAN_COMPLETE)
-+	 && time_before(jiffies, adev->scan_start + 10*HZ)
-+	) {
-+		log(L_INIT, "start_scan: seems like previous scan "
-+		"is still running. Not starting anew. Please report\n");
-+		return;
-+	}
-+
-+	log(L_INIT, "starting radio scan\n");
-+	/* remember that fw is commanded to do scan */
-+	adev->scan_start = jiffies;
-+	CLEAR_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+	/* issue it */
-+	acx_s_scan_chan(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acx111 feature config
-+*/
-+static int
-+acx111_s_get_feature_config(acx_device_t *adev,
-+		u32 *feature_options, u32 *data_flow_options)
-+{
-+	struct acx111_ie_feature_config feat;
-+
-+	if (!IS_ACX111(adev)) {
-+		return NOT_OK;
-+	}
-+
-+	memset(&feat, 0, sizeof(feat));
-+
-+	if (OK != acx_s_interrogate(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) {
-+		return NOT_OK;
-+	}
-+	log(L_DEBUG,
-+		"got Feature option:0x%X, DataFlow option: 0x%X\n",
-+		feat.feature_options,
-+		feat.data_flow_options);
-+
-+	if (feature_options)
-+		*feature_options = le32_to_cpu(feat.feature_options);
-+	if (data_flow_options)
-+		*data_flow_options = le32_to_cpu(feat.data_flow_options);
-+
-+	return OK;
-+}
-+
-+static int
-+acx111_s_set_feature_config(acx_device_t *adev,
-+	u32 feature_options, u32 data_flow_options,
-+	unsigned int mode /* 0 == remove, 1 == add, 2 == set */)
-+{
-+	struct acx111_ie_feature_config feat;
-+
-+	if (!IS_ACX111(adev)) {
-+		return NOT_OK;
-+	}
-+
-+	if ((mode < 0) || (mode > 2))
-+		return NOT_OK;
-+
-+	if (mode != 2)
-+		/* need to modify old data */
-+		acx111_s_get_feature_config(adev, &feat.feature_options, &feat.data_flow_options);
-+	else {
-+		/* need to set a completely new value */
-+		feat.feature_options = 0;
-+		feat.data_flow_options = 0;
-+	}
-+
-+	if (mode == 0) { /* remove */
-+		CLEAR_BIT(feat.feature_options, cpu_to_le32(feature_options));
-+		CLEAR_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options));
-+	} else { /* add or set */
-+		SET_BIT(feat.feature_options, cpu_to_le32(feature_options));
-+		SET_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options));
-+	}
-+
-+	log(L_DEBUG,
-+		"old: feature 0x%08X dataflow 0x%08X. mode: %u\n"
-+		"new: feature 0x%08X dataflow 0x%08X\n",
-+		feature_options, data_flow_options, mode,
-+		le32_to_cpu(feat.feature_options),
-+		le32_to_cpu(feat.data_flow_options));
-+
-+	if (OK != acx_s_configure(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) {
-+		return NOT_OK;
-+	}
-+
-+	return OK;
-+}
-+
-+static inline int
-+acx111_s_feature_off(acx_device_t *adev, u32 f, u32 d)
-+{
-+	return acx111_s_set_feature_config(adev, f, d, 0);
-+}
-+static inline int
-+acx111_s_feature_on(acx_device_t *adev, u32 f, u32 d)
-+{
-+	return acx111_s_set_feature_config(adev, f, d, 1);
-+}
-+static inline int
-+acx111_s_feature_set(acx_device_t *adev, u32 f, u32 d)
-+{
-+	return acx111_s_set_feature_config(adev, f, d, 2);
-+}
-+
-+
-+/***********************************************************************
-+** acx100_s_init_memory_pools
-+*/
-+static int
-+acx100_s_init_memory_pools(acx_device_t *adev, const acx_ie_memmap_t *mmt)
-+{
-+	acx100_ie_memblocksize_t MemoryBlockSize;
-+	acx100_ie_memconfigoption_t MemoryConfigOption;
-+	int TotalMemoryBlocks;
-+	int RxBlockNum;
-+	int TotalRxBlockSize;
-+	int TxBlockNum;
-+	int TotalTxBlockSize;
-+
-+	FN_ENTER;
-+
-+	/* Let's see if we can follow this:
-+	   first we select our memory block size (which I think is
-+	   completely arbitrary) */
-+	MemoryBlockSize.size = cpu_to_le16(adev->memblocksize);
-+
-+	/* Then we alert the card to our decision of block size */
-+	if (OK != acx_s_configure(adev, &MemoryBlockSize, ACX100_IE_BLOCK_SIZE)) {
-+		goto bad;
-+	}
-+
-+	/* We figure out how many total blocks we can create, using
-+	   the block size we chose, and the beginning and ending
-+	   memory pointers, i.e.: end-start/size */
-+	TotalMemoryBlocks = (le32_to_cpu(mmt->PoolEnd) - le32_to_cpu(mmt->PoolStart)) / adev->memblocksize;
-+
-+	log(L_DEBUG, "TotalMemoryBlocks=%u (%u bytes)\n",
-+		TotalMemoryBlocks, TotalMemoryBlocks*adev->memblocksize);
-+
-+	/* MemoryConfigOption.DMA_config bitmask:
-+			access to ACX memory is to be done:
-+	0x00080000	using PCI conf space?!
-+	0x00040000	using IO instructions?
-+	0x00000000	using memory access instructions
-+	0x00020000	using local memory block linked list (else what?)
-+	0x00010000	using host indirect descriptors (else host must access ACX memory?)
-+	*/
-+#if defined (ACX_MEM)
-+	        /*
-+	         * ACX ignores DMA_config for generic slave mode.
-+		 */
-+	        MemoryConfigOption.DMA_config = 0;
-+		/* Declare start of the Rx host pool */
-+		MemoryConfigOption.pRxHostDesc = cpu2acx(0);
-+		log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n",
-+				acx2cpu(MemoryConfigOption.pRxHostDesc),
-+				(long)adev->rxhostdesc_startphy);
-+#else
-+	if (IS_PCI(adev)) {
-+		MemoryConfigOption.DMA_config = cpu_to_le32(0x30000);
-+		/* Declare start of the Rx host pool */
-+		MemoryConfigOption.pRxHostDesc = cpu2acx(adev->rxhostdesc_startphy);
-+		log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n",
-+				acx2cpu(MemoryConfigOption.pRxHostDesc),
-+				(long)adev->rxhostdesc_startphy);
-+	} else {
-+		MemoryConfigOption.DMA_config = cpu_to_le32(0x20000);
-+	}
-+#endif
-+
-+	/* 50% of the allotment of memory blocks go to tx descriptors */
-+	TxBlockNum = TotalMemoryBlocks / 2;
-+	MemoryConfigOption.TxBlockNum = cpu_to_le16(TxBlockNum);
-+
-+	/* and 50% go to the rx descriptors */
-+	RxBlockNum = TotalMemoryBlocks - TxBlockNum;
-+	MemoryConfigOption.RxBlockNum = cpu_to_le16(RxBlockNum);
-+
-+	/* size of the tx and rx descriptor queues */
-+	TotalTxBlockSize = TxBlockNum * adev->memblocksize;
-+	TotalRxBlockSize = RxBlockNum * adev->memblocksize;
-+	log(L_DEBUG, "TxBlockNum %u RxBlockNum %u TotalTxBlockSize %u "
-+		"TotalTxBlockSize %u\n", TxBlockNum, RxBlockNum,
-+		TotalTxBlockSize, TotalRxBlockSize);
-+
-+
-+	/* align the tx descriptor queue to an alignment of 0x20 (32 bytes) */
-+	MemoryConfigOption.rx_mem =
-+		cpu_to_le32((le32_to_cpu(mmt->PoolStart) + 0x1f) & ~0x1f);
-+
-+	/* align the rx descriptor queue to units of 0x20
-+	 * and offset it by the tx descriptor queue */
-+	MemoryConfigOption.tx_mem =
-+		cpu_to_le32((le32_to_cpu(mmt->PoolStart) + TotalRxBlockSize + 0x1f) & ~0x1f);
-+	log(L_DEBUG, "rx_mem %08X rx_mem %08X\n",
-+		MemoryConfigOption.tx_mem, MemoryConfigOption.rx_mem);
-+
-+	/* alert the device to our decision */
-+	if (OK != acx_s_configure(adev, &MemoryConfigOption, ACX1xx_IE_MEMORY_CONFIG_OPTIONS)) {
-+		goto bad;
-+	}
-+
-+	/* and tell the device to kick it into gear */
-+	if (OK != acx_s_issue_cmd(adev, ACX100_CMD_INIT_MEMORY, NULL, 0)) {
-+		goto bad;
-+	}
-+#ifdef ACX_MEM
-+	/*
-+	 * slave memory interface has to manage the transmit pools for the ACX,
-+	 * so it needs to know what we chose here.
-+	 */
-+	adev->acx_txbuf_start = MemoryConfigOption.tx_mem;
-+	adev->acx_txbuf_numblocks = MemoryConfigOption.TxBlockNum;
-+#endif
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx100_s_create_dma_regions
-+**
-+** Note that this fn messes up heavily with hardware, but we cannot
-+** lock it (we need to sleep). Not a problem since IRQs can't happen
-+*/
-+static int
-+acx100_s_create_dma_regions(acx_device_t *adev)
-+{
-+	acx100_ie_queueconfig_t queueconf;
-+	acx_ie_memmap_t memmap;
-+	int res = NOT_OK;
-+	u32 tx_queue_start, rx_queue_start;
-+
-+	FN_ENTER;
-+
-+	/* read out the acx100 physical start address for the queues */
-+	if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	tx_queue_start = le32_to_cpu(memmap.QueueStart);
-+	rx_queue_start = tx_queue_start + TX_CNT * sizeof(txdesc_t);
-+
-+	log(L_DEBUG, "initializing Queue Indicator\n");
-+
-+	memset(&queueconf, 0, sizeof(queueconf));
-+
-+	/* Not needed for PCI or slave memory, so we can avoid setting them altogether */
-+	if (IS_USB(adev)) {
-+		queueconf.NumTxDesc = USB_TX_CNT;
-+		queueconf.NumRxDesc = USB_RX_CNT;
-+	}
-+
-+	/* calculate size of queues */
-+	queueconf.AreaSize = cpu_to_le32(
-+			TX_CNT * sizeof(txdesc_t) +
-+			RX_CNT * sizeof(rxdesc_t) + 8
-+			);
-+	queueconf.NumTxQueues = 1;  /* number of tx queues */
-+	/* sets the beginning of the tx descriptor queue */
-+	queueconf.TxQueueStart = memmap.QueueStart;
-+	/* done by memset: queueconf.TxQueuePri = 0; */
-+	queueconf.RxQueueStart = cpu_to_le32(rx_queue_start);
-+	queueconf.QueueOptions = 1;		/* auto reset descriptor */
-+	/* sets the end of the rx descriptor queue */
-+	queueconf.QueueEnd = cpu_to_le32(
-+			rx_queue_start + RX_CNT * sizeof(rxdesc_t)
-+			);
-+	/* sets the beginning of the next queue */
-+	queueconf.HostQueueEnd = cpu_to_le32(le32_to_cpu(queueconf.QueueEnd) + 8);
-+	if (OK != acx_s_configure(adev, &queueconf, ACX1xx_IE_QUEUE_CONFIG)) {
-+		goto fail;
-+	}
-+
-+#if defined (ACX_MEM)
-+	/* sets the beginning of the rx descriptor queue, after the tx descrs */
-+		adev->acx_queue_indicator =
-+		  (queueindicator_t *) le32_to_cpu (queueconf.QueueEnd);
-+		if (OK != acxmem_s_create_hostdesc_queues(adev))
-+			goto fail;
-+
-+		acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start);
-+#else
-+	if (IS_PCI(adev)) {
-+	/* sets the beginning of the rx descriptor queue, after the tx descrs */
-+		if (OK != acxpci_s_create_hostdesc_queues(adev))
-+			goto fail;
-+		acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start);
-+	}
-+#endif
-+
-+	if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	/*
-+	 * Have to make sure we skip past the Queue Indicator (QueueEnd) and Host Queue Indicator
-+	 * maps, each of which are 8 bytes and follow immediately after the transmit and
-+	 * receive queues.
-+	 */
-+	memmap.PoolStart = cpu_to_le32(
-+			(le32_to_cpu(memmap.QueueEnd) + 4 + 0x1f) & ~0x1f
-+			);
-+
-+	if (OK != acx_s_configure(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	if (OK != acx100_s_init_memory_pools(adev, &memmap)) {
-+		goto fail;
-+	}
-+
-+	res = OK;
-+	goto end;
-+
-+fail:
-+	acx_s_msleep(1000); /* ? */
-+#if defined (ACX_MEM)
-+		acxmem_free_desc_queues(adev);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_free_desc_queues(adev);
-+#endif
-+end:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acx111_s_create_dma_regions
-+**
-+** Note that this fn messes heavily with hardware, but we cannot
-+** lock it (we need to sleep). Not a problem since IRQs can't happen
-+*/
-+#define ACX111_PERCENT(percent) ((percent)/5)
-+
-+static int
-+acx111_s_create_dma_regions(acx_device_t *adev)
-+{
-+	struct acx111_ie_memoryconfig memconf;
-+	struct acx111_ie_queueconfig queueconf;
-+	u32 tx_queue_start, rx_queue_start;
-+
-+	FN_ENTER;
-+
-+	/* Calculate memory positions and queue sizes */
-+
-+	/* Set up our host descriptor pool + data pool */
-+#if defined (ACX_MEM)
-+		if (OK != acxmem_s_create_hostdesc_queues(adev))
-+			goto fail;
-+#else
-+	if (IS_PCI(adev)) {
-+		if (OK != acxpci_s_create_hostdesc_queues(adev))
-+			goto fail;
-+	}
-+#endif
-+
-+	memset(&memconf, 0, sizeof(memconf));
-+	/* the number of STAs (STA contexts) to support
-+	** NB: was set to 1 and everything seemed to work nevertheless... */
-+	memconf.no_of_stations = cpu_to_le16(VEC_SIZE(adev->sta_list));
-+	/* specify the memory block size. Default is 256 */
-+	memconf.memory_block_size = cpu_to_le16(adev->memblocksize);
-+	/* let's use 50%/50% for tx/rx (specify percentage, units of 5%) */
-+	memconf.tx_rx_memory_block_allocation = ACX111_PERCENT(50);
-+	/* set the count of our queues
-+	** NB: struct acx111_ie_memoryconfig shall be modified
-+	** if we ever will switch to more than one rx and/or tx queue */
-+	memconf.count_rx_queues = 1;
-+	memconf.count_tx_queues = 1;
-+	/* 0 == Busmaster Indirect Memory Organization, which is what we want
-+	 * (using linked host descs with their allocated mem).
-+	 * 2 == Generic Bus Slave */
-+	/* done by memset: memconf.options = 0; */
-+	/* let's use 25% for fragmentations and 75% for frame transfers
-+	 * (specified in units of 5%) */
-+	memconf.fragmentation = ACX111_PERCENT(75);
-+	/* Rx descriptor queue config */
-+	memconf.rx_queue1_count_descs = RX_CNT;
-+	memconf.rx_queue1_type = 7; /* must be set to 7 */
-+	/* done by memset: memconf.rx_queue1_prio = 0; low prio */
-+#if defined (ACX_MEM)
-+		memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy);
-+#else
-+	if (IS_PCI(adev)) {
-+		memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy);
-+	}
-+#endif
-+	/* Tx descriptor queue config */
-+	memconf.tx_queue1_count_descs = TX_CNT;
-+	/* done by memset: memconf.tx_queue1_attributes = 0; lowest priority */
-+
-+	/* NB1: this looks wrong: (memconf,ACX1xx_IE_QUEUE_CONFIG),
-+	** (queueconf,ACX1xx_IE_MEMORY_CONFIG_OPTIONS) look swapped, eh?
-+	** But it is actually correct wrt IE numbers.
-+	** NB2: sizeof(memconf) == 28 == 0x1c but configure(ACX1xx_IE_QUEUE_CONFIG)
-+	** writes 0x20 bytes (because same IE for acx100 uses struct acx100_ie_queueconfig
-+	** which is 4 bytes larger. what a mess. TODO: clean it up) */
-+	if (OK != acx_s_configure(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG)) {
-+		goto fail;
-+	}
-+
-+	acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS);
-+
-+	tx_queue_start = le32_to_cpu(queueconf.tx1_queue_address);
-+	rx_queue_start = le32_to_cpu(queueconf.rx1_queue_address);
-+
-+	log(L_INIT, "dump queue head (from card):\n"
-+		       "len: %u\n"
-+		       "tx_memory_block_address: %X\n"
-+		       "rx_memory_block_address: %X\n"
-+		       "tx1_queue address: %X\n"
-+		       "rx1_queue address: %X\n",
-+				le16_to_cpu(queueconf.len),
-+				le32_to_cpu(queueconf.tx_memory_block_address),
-+				le32_to_cpu(queueconf.rx_memory_block_address),
-+				tx_queue_start,
-+				rx_queue_start);
-+
-+#if defined (ACX_MEM)
-+		acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start);
-+#endif
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+#if defined (ACX_MEM)
-+		acxmem_free_desc_queues(adev);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_free_desc_queues(adev);
-+#endif
-+
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static void
-+acx_s_initialize_rx_config(acx_device_t *adev)
-+{
-+	struct {
-+		u16	id;
-+		u16	len;
-+		u16	rx_cfg1;
-+		u16	rx_cfg2;
-+	} ACX_PACKED cfg;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_OFF:
-+		adev->rx_config_1 = (u16) (0
-+			/* | RX_CFG1_INCLUDE_RXBUF_HDR	*/
-+			/* | RX_CFG1_FILTER_SSID	*/
-+			/* | RX_CFG1_FILTER_BCAST	*/
-+			/* | RX_CFG1_RCV_MC_ADDR1	*/
-+			/* | RX_CFG1_RCV_MC_ADDR0	*/
-+			/* | RX_CFG1_FILTER_ALL_MULTI	*/
-+			/* | RX_CFG1_FILTER_BSSID	*/
-+			/* | RX_CFG1_FILTER_MAC		*/
-+			/* | RX_CFG1_RCV_PROMISCUOUS	*/
-+			/* | RX_CFG1_INCLUDE_FCS	*/
-+			/* | RX_CFG1_INCLUDE_PHY_HDR	*/
-+			);
-+		adev->rx_config_2 = (u16) (0
-+			/*| RX_CFG2_RCV_ASSOC_REQ	*/
-+			/*| RX_CFG2_RCV_AUTH_FRAMES	*/
-+			/*| RX_CFG2_RCV_BEACON_FRAMES	*/
-+			/*| RX_CFG2_RCV_CONTENTION_FREE	*/
-+			/*| RX_CFG2_RCV_CTRL_FRAMES	*/
-+			/*| RX_CFG2_RCV_DATA_FRAMES	*/
-+			/*| RX_CFG2_RCV_BROKEN_FRAMES	*/
-+			/*| RX_CFG2_RCV_MGMT_FRAMES	*/
-+			/*| RX_CFG2_RCV_PROBE_REQ	*/
-+			/*| RX_CFG2_RCV_PROBE_RESP	*/
-+			/*| RX_CFG2_RCV_ACK_FRAMES	*/
-+			/*| RX_CFG2_RCV_OTHER		*/
-+			);
-+		break;
-+	case ACX_MODE_MONITOR:
-+		adev->rx_config_1 = (u16) (0
-+			/* | RX_CFG1_INCLUDE_RXBUF_HDR	*/
-+			/* | RX_CFG1_FILTER_SSID	*/
-+			/* | RX_CFG1_FILTER_BCAST	*/
-+			/* | RX_CFG1_RCV_MC_ADDR1	*/
-+			/* | RX_CFG1_RCV_MC_ADDR0	*/
-+			/* | RX_CFG1_FILTER_ALL_MULTI	*/
-+			/* | RX_CFG1_FILTER_BSSID	*/
-+			/* | RX_CFG1_FILTER_MAC		*/
-+			| RX_CFG1_RCV_PROMISCUOUS
-+			/* | RX_CFG1_INCLUDE_FCS	*/
-+			/* | RX_CFG1_INCLUDE_PHY_HDR	*/
-+			);
-+		adev->rx_config_2 = (u16) (0
-+			| RX_CFG2_RCV_ASSOC_REQ
-+			| RX_CFG2_RCV_AUTH_FRAMES
-+			| RX_CFG2_RCV_BEACON_FRAMES
-+			| RX_CFG2_RCV_CONTENTION_FREE
-+			| RX_CFG2_RCV_CTRL_FRAMES
-+			| RX_CFG2_RCV_DATA_FRAMES
-+			| RX_CFG2_RCV_BROKEN_FRAMES
-+			| RX_CFG2_RCV_MGMT_FRAMES
-+			| RX_CFG2_RCV_PROBE_REQ
-+			| RX_CFG2_RCV_PROBE_RESP
-+			| RX_CFG2_RCV_ACK_FRAMES
-+			| RX_CFG2_RCV_OTHER
-+			);
-+		break;
-+	default:
-+		adev->rx_config_1 = (u16) (0
-+			/* | RX_CFG1_INCLUDE_RXBUF_HDR	*/
-+			/* | RX_CFG1_FILTER_SSID	*/
-+			/* | RX_CFG1_FILTER_BCAST	*/
-+			/* | RX_CFG1_RCV_MC_ADDR1	*/
-+			/* | RX_CFG1_RCV_MC_ADDR0	*/
-+			/* | RX_CFG1_FILTER_ALL_MULTI	*/
-+			/* | RX_CFG1_FILTER_BSSID	*/
-+			| RX_CFG1_FILTER_MAC
-+			/* | RX_CFG1_RCV_PROMISCUOUS	*/
-+			/* | RX_CFG1_INCLUDE_FCS	*/
-+			/* | RX_CFG1_INCLUDE_PHY_HDR	*/
-+			);
-+		adev->rx_config_2 = (u16) (0
-+			| RX_CFG2_RCV_ASSOC_REQ
-+			| RX_CFG2_RCV_AUTH_FRAMES
-+			| RX_CFG2_RCV_BEACON_FRAMES
-+			| RX_CFG2_RCV_CONTENTION_FREE
-+			| RX_CFG2_RCV_CTRL_FRAMES
-+			| RX_CFG2_RCV_DATA_FRAMES
-+			/*| RX_CFG2_RCV_BROKEN_FRAMES	*/
-+			| RX_CFG2_RCV_MGMT_FRAMES
-+			| RX_CFG2_RCV_PROBE_REQ
-+			| RX_CFG2_RCV_PROBE_RESP
-+			/*| RX_CFG2_RCV_ACK_FRAMES	*/
-+			| RX_CFG2_RCV_OTHER
-+			);
-+		break;
-+	}
-+	adev->rx_config_1 |= RX_CFG1_INCLUDE_RXBUF_HDR;
-+
-+	if ((adev->rx_config_1 & RX_CFG1_INCLUDE_PHY_HDR)
-+	 || (adev->firmware_numver >= 0x02000000))
-+		adev->phy_header_len = IS_ACX111(adev) ? 8 : 4;
-+	else
-+		adev->phy_header_len = 0;
-+
-+	log(L_INIT, "setting RXconfig to %04X:%04X\n",
-+			adev->rx_config_1, adev->rx_config_2);
-+	cfg.rx_cfg1 = cpu_to_le16(adev->rx_config_1);
-+	cfg.rx_cfg2 = cpu_to_le16(adev->rx_config_2);
-+	acx_s_configure(adev, &cfg, ACX1xx_IE_RXCONFIG);
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_set_defaults
-+*/
-+void
-+acx_s_set_defaults(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	/* do it before getting settings, prevent bogus channel 0 warning */
-+	adev->channel = 1;
-+
-+	/* query some settings from the card.
-+	 * NOTE: for some settings, e.g. CCA and ED (ACX100!), an initial
-+	 * query is REQUIRED, otherwise the card won't work correctly! */
-+	adev->get_mask = GETSET_ANTENNA|GETSET_SENSITIVITY|GETSET_STATION_ID|GETSET_REG_DOMAIN;
-+	/* Only ACX100 supports ED and CCA */
-+	if (IS_ACX100(adev))
-+		adev->get_mask |= GETSET_CCA|GETSET_ED_THRESH;
-+
-+	acx_s_update_card_settings(adev);
-+
-+	acx_lock(adev, flags);
-+
-+	/* set our global interrupt mask */
-+#if defined (ACX_MEM)
-+		acxmem_set_interrupt_mask(adev);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_set_interrupt_mask(adev);
-+#endif
-+
-+	adev->led_power = 1; /* LED is active on startup */
-+	adev->brange_max_quality = 60; /* LED blink max quality is 60 */
-+	adev->brange_time_last_state_change = jiffies;
-+
-+	/* copy the MAC address we just got from the card
-+	 * into our MAC address used during current 802.11 session */
-+	MAC_COPY(adev->dev_addr, adev->ndev->dev_addr);
-+	MAC_BCAST(adev->ap);
-+
-+	adev->essid_len =
-+		snprintf(adev->essid, sizeof(adev->essid), "STA%02X%02X%02X",
-+			adev->dev_addr[3], adev->dev_addr[4], adev->dev_addr[5]);
-+	adev->essid_active = 1;
-+
-+	/* we have a nick field to waste, so why not abuse it
-+	 * to announce the driver version? ;-) */
-+	strncpy(adev->nick, "acx " ACX_RELEASE, IW_ESSID_MAX_SIZE);
-+
-+#if defined (ACX_MEM)
-+		adev->reg_dom_id = adev->cfgopt_domains.list[0];
-+#else
-+	if (IS_PCI(adev)) { /* FIXME: this should be made to apply to USB, too! */
-+		/* first regulatory domain entry in EEPROM == default reg. domain */
-+		adev->reg_dom_id = adev->cfgopt_domains.list[0];
-+	}
-+#endif
-+
-+	/* 0xffff would be better, but then we won't get a "scan complete"
-+	 * interrupt, so our current infrastructure will fail: */
-+	adev->scan_count = 1;
-+	adev->scan_mode = ACX_SCAN_OPT_ACTIVE;
-+	adev->scan_duration = 100;
-+	adev->scan_probe_delay = 200;
-+	/* reported to break scanning: adev->scan_probe_delay = adev->cfgopt_probe_delay; */
-+	adev->scan_rate = ACX_SCAN_RATE_1;
-+
-+	adev->mode = ACX_MODE_2_STA;
-+	adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM;
-+	adev->listen_interval = 100;
-+	adev->beacon_interval = DEFAULT_BEACON_INTERVAL;
-+	adev->dtim_interval = DEFAULT_DTIM_INTERVAL;
-+
-+	adev->msdu_lifetime = DEFAULT_MSDU_LIFETIME;
-+
-+	adev->rts_threshold = DEFAULT_RTS_THRESHOLD;
-+	adev->frag_threshold = 2346;
-+
-+	/* use standard default values for retry limits */
-+	adev->short_retry = 7; /* max. retries for (short) non-RTS packets */
-+	adev->long_retry = 4; /* max. retries for long (RTS) packets */
-+
-+	adev->preamble_mode = 2; /* auto */
-+	adev->fallback_threshold = 3;
-+	adev->stepup_threshold = 10;
-+	adev->rate_bcast = RATE111_1;
-+	adev->rate_bcast100 = RATE100_1;
-+	adev->rate_basic = RATE111_1 | RATE111_2;
-+	adev->rate_auto = 1;
-+	if (IS_ACX111(adev)) {
-+		adev->rate_oper = RATE111_ALL;
-+	} else {
-+		adev->rate_oper = RATE111_ACX100_COMPAT;
-+	}
-+
-+	/* Supported Rates element - the rates here are given in units of
-+	 * 500 kbit/s, plus 0x80 added. See 802.11-1999.pdf item 7.3.2.2 */
-+	acx_l_update_ratevector(adev);
-+
-+	/* set some more defaults */
-+	if (IS_ACX111(adev)) {
-+		/* 30mW (15dBm) is default, at least in my acx111 card: */
-+		adev->tx_level_dbm = 15;
-+	} else {
-+		/* don't use max. level, since it might be dangerous
-+		 * (e.g. WRT54G people experience
-+		 * excessive Tx power damage!) */
-+		adev->tx_level_dbm = 18;
-+		/*
-+		 * Lower power for the iPaq hx4700
-+		 */
-+		if (IS_MEM(adev)) {
-+			adev->tx_level_dbm = 14;
-+		}
-+	}
-+	/* adev->tx_level_auto = 1; */
-+	if (IS_ACX111(adev)) {
-+		/* start with sensitivity level 1 out of 3: */
-+		adev->sensitivity = 1;
-+	}
-+
-+/* #define ENABLE_POWER_SAVE */
-+#ifdef ENABLE_POWER_SAVE
-+	adev->ps_wakeup_cfg = PS_CFG_ENABLE | PS_CFG_WAKEUP_ALL_BEAC;
-+	adev->ps_listen_interval = 1;
-+	adev->ps_options = PS_OPT_ENA_ENHANCED_PS | PS_OPT_TX_PSPOLL | PS_OPT_STILL_RCV_BCASTS;
-+	adev->ps_hangover_period = 30;
-+	adev->ps_enhanced_transition_time = 0;
-+#else
-+	adev->ps_wakeup_cfg = 0;
-+	adev->ps_listen_interval = 0;
-+	adev->ps_options = 0;
-+	adev->ps_hangover_period = 0;
-+	adev->ps_enhanced_transition_time = 0;
-+#endif
-+
-+	/* These settings will be set in fw on ifup */
-+	adev->set_mask = 0
-+		| GETSET_RETRY
-+		| SET_MSDU_LIFETIME
-+	/* configure card to do rate fallback when in auto rate mode */
-+		| SET_RATE_FALLBACK
-+		| SET_RXCONFIG
-+		| GETSET_TXPOWER
-+	/* better re-init the antenna value we got above */
-+		| GETSET_ANTENNA
-+#if POWER_SAVE_80211
-+		| GETSET_POWER_80211
-+#endif
-+		;
-+
-+	acx_unlock(adev, flags);
-+	acx_lock_unhold(); /* hold time 844814 CPU ticks @2GHz */
-+
-+	acx_s_initialize_rx_config(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** FIXME: this should be solved in a general way for all radio types
-+** by decoding the radio firmware module,
-+** since it probably has some standard structure describing how to
-+** set the power level of the radio module which it controls.
-+** Or maybe not, since the radio module probably has a function interface
-+** instead which then manages Tx level programming :-\
-+*/
-+static int
-+acx111_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	struct acx111_ie_tx_level tx_level;
-+
-+	/* my acx111 card has two power levels in its configoptions (== EEPROM):
-+	 * 1 (30mW) [15dBm]
-+	 * 2 (10mW) [10dBm]
-+	 * For now, just assume all other acx111 cards have the same.
-+	 * FIXME: Ideally we would query it here, but we first need a
-+	 * standard way to query individual configoptions easily.
-+	 * Well, now we have proper cfgopt txpower variables, but this still
-+	 * hasn't been done yet, since it also requires dBm <-> mW conversion here... */
-+	if (level_dbm <= 12) {
-+		tx_level.level = 2; /* 10 dBm */
-+		adev->tx_level_dbm = 10;
-+	} else {
-+		tx_level.level = 1; /* 15 dBm */
-+		adev->tx_level_dbm = 15;
-+	}
-+	if (level_dbm != adev->tx_level_dbm)
-+		log(L_INIT, "acx111 firmware has specific "
-+			"power levels only: adjusted %d dBm to %d dBm!\n",
-+			level_dbm, adev->tx_level_dbm);
-+
-+	return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL);
-+}
-+
-+static int
-+acx_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	if (IS_ACX111(adev)) {
-+		return acx111_s_set_tx_level(adev, level_dbm);
-+	}
-+#if defined (ACX_MEM)
-+		return acx100mem_s_set_tx_level(adev, level_dbm);
-+#else
-+	if (IS_PCI(adev)) {
-+		return acx100pci_s_set_tx_level(adev, level_dbm);
-+	}
-+#endif
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#ifdef UNUSED
-+/* Returns the current tx level (ACX111) */
-+static u8
-+acx111_s_get_tx_level(acx_device_t *adev)
-+{
-+	struct acx111_ie_tx_level tx_level;
-+
-+	tx_level.level = 0;
-+	acx_s_interrogate(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL);
-+	return tx_level.level;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_l_rxmonitor
-+** Called from IRQ context only
-+*/
-+static void
-+acx_l_rxmonitor(acx_device_t *adev, const rxbuffer_t *rxbuf)
-+{
-+	wlansniffrm_t *msg;
-+	struct sk_buff *skb;
-+	void *datap;
-+	unsigned int skb_len;
-+	int payload_offset;
-+
-+	FN_ENTER;
-+
-+	/* we are in big luck: the acx100 doesn't modify any of the fields */
-+	/* in the 802.11 frame. just pass this packet into the PF_PACKET */
-+	/* subsystem. yeah. */
-+	payload_offset = ((u8*)acx_get_wlan_hdr(adev, rxbuf) - (u8*)rxbuf);
-+	skb_len = RXBUF_BYTES_USED(rxbuf) - payload_offset;
-+
-+	/* sanity check */
-+	if (unlikely(skb_len > WLAN_A4FR_MAXLEN_WEP)) {
-+		printk("%s: monitor mode panic: oversized frame!\n",
-+				adev->ndev->name);
-+		goto end;
-+	}
-+
-+	if (adev->ndev->type == ARPHRD_IEEE80211_PRISM)
-+		skb_len += sizeof(*msg);
-+
-+	/* allocate skb */
-+	skb = dev_alloc_skb(skb_len);
-+	if (unlikely(!skb)) {
-+		printk("%s: no memory for skb (%u bytes)\n",
-+				adev->ndev->name, skb_len);
-+		goto end;
-+	}
-+
-+	skb_put(skb, skb_len);
-+
-+	if (adev->ndev->type == ARPHRD_IEEE80211) {
-+		/* when in raw 802.11 mode, just copy frame as-is */
-+		datap = skb->data;
-+	} else if (adev->ndev->type == ARPHRD_IEEE80211_PRISM) {
-+		/* emulate prism header */
-+		msg = (wlansniffrm_t*)skb->data;
-+		datap = msg + 1;
-+
-+		msg->msgcode = WLANSNIFFFRM;
-+		msg->msglen = sizeof(*msg);
-+		strncpy(msg->devname, adev->ndev->name, sizeof(msg->devname)-1);
-+		msg->devname[sizeof(msg->devname)-1] = '\0';
-+
-+		msg->hosttime.did = WLANSNIFFFRM_hosttime;
-+		msg->hosttime.status = WLANITEM_STATUS_data_ok;
-+		msg->hosttime.len = 4;
-+		msg->hosttime.data = jiffies;
-+
-+		msg->mactime.did = WLANSNIFFFRM_mactime;
-+		msg->mactime.status = WLANITEM_STATUS_data_ok;
-+		msg->mactime.len = 4;
-+		msg->mactime.data = rxbuf->time;
-+
-+		msg->channel.did = WLANSNIFFFRM_channel;
-+		msg->channel.status = WLANITEM_STATUS_data_ok;
-+		msg->channel.len = 4;
-+		msg->channel.data = adev->channel;
-+
-+		msg->rssi.did = WLANSNIFFFRM_rssi;
-+		msg->rssi.status = WLANITEM_STATUS_no_value;
-+		msg->rssi.len = 4;
-+		msg->rssi.data = 0;
-+
-+		msg->sq.did = WLANSNIFFFRM_sq;
-+		msg->sq.status = WLANITEM_STATUS_no_value;
-+		msg->sq.len = 4;
-+		msg->sq.data = 0;
-+
-+		msg->signal.did = WLANSNIFFFRM_signal;
-+		msg->signal.status = WLANITEM_STATUS_data_ok;
-+		msg->signal.len = 4;
-+		msg->signal.data = rxbuf->phy_snr;
-+
-+		msg->noise.did = WLANSNIFFFRM_noise;
-+		msg->noise.status = WLANITEM_STATUS_data_ok;
-+		msg->noise.len = 4;
-+		msg->noise.data = rxbuf->phy_level;
-+
-+		msg->rate.did = WLANSNIFFFRM_rate;
-+		msg->rate.status = WLANITEM_STATUS_data_ok;
-+		msg->rate.len = 4;
-+		msg->rate.data = rxbuf->phy_plcp_signal / 5;
-+
-+		msg->istx.did = WLANSNIFFFRM_istx;
-+		msg->istx.status = WLANITEM_STATUS_data_ok;
-+		msg->istx.len = 4;
-+		msg->istx.data = 0;	/* tx=0: it's not a tx packet */
-+
-+		skb_len -= sizeof(*msg);
-+
-+		msg->frmlen.did = WLANSNIFFFRM_signal;
-+		msg->frmlen.status = WLANITEM_STATUS_data_ok;
-+		msg->frmlen.len = 4;
-+		msg->frmlen.data = skb_len;
-+	} else {
-+		printk("acx: unsupported netdev type %d!\n", adev->ndev->type);
-+		dev_kfree_skb(skb);
-+		return;
-+	}
-+
-+	/* sanity check (keep it here) */
-+	if (unlikely((int)skb_len < 0)) {
-+		printk("acx: skb_len=%d. Driver bug, please report\n", (int)skb_len);
-+		dev_kfree_skb(skb);
-+		return;
-+	}
-+	memcpy(datap, ((unsigned char*)rxbuf)+payload_offset, skb_len);
-+
-+	skb->dev = adev->ndev;
-+	skb->dev->last_rx = jiffies;
-+
-+	skb_reset_mac_header(skb);
-+	skb->ip_summed = CHECKSUM_NONE;
-+	skb->pkt_type = PACKET_OTHERHOST;
-+	skb->protocol = htons(ETH_P_80211_RAW);
-+	netif_rx(skb);
-+
-+	adev->stats.rx_packets++;
-+	adev->stats.rx_bytes += skb->len;
-+
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_rx_ieee802_11_frame
-+**
-+** Called from IRQ context only
-+*/
-+
-+/* All these contortions are for saner dup logging
-+**
-+** We want: (a) to know about excessive dups
-+** (b) to not spam kernel log about occasional dups
-+**
-+** 1/64 threshold was chosen by running "ping -A"
-+** It gave "rx: 59 DUPs in 2878 packets" only with 4 parallel
-+** "ping -A" streams running. */
-+/* 2005-10-11: bumped up to 1/8
-+** subtract a $smallint from dup_count in order to
-+** avoid "2 DUPs in 19 packets" messages */
-+static inline int
-+acx_l_handle_dup(acx_device_t *adev, u16 seq)
-+{
-+	if (adev->dup_count) {
-+		adev->nondup_count++;
-+		if (time_after(jiffies, adev->dup_msg_expiry)) {
-+			/* Log only if more than 1 dup in 64 packets */
-+			if (adev->nondup_count/8 < adev->dup_count-5) {
-+				printk(KERN_INFO "%s: rx: %d DUPs in "
-+					"%d packets received in 10 secs\n",
-+					adev->ndev->name,
-+					adev->dup_count,
-+					adev->nondup_count);
-+			}
-+			adev->dup_count = 0;
-+			adev->nondup_count = 0;
-+		}
-+	}
-+	if (unlikely(seq == adev->last_seq_ctrl)) {
-+		if (!adev->dup_count++)
-+			adev->dup_msg_expiry = jiffies + 10*HZ;
-+		adev->stats.rx_errors++;
-+		return 1; /* a dup */
-+	}
-+	adev->last_seq_ctrl = seq;
-+	return 0;
-+}
-+
-+static int
-+acx_l_rx_ieee802_11_frame(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	unsigned int ftype, fstype;
-+	const wlan_hdr_t *hdr;
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	/* see IEEE 802.11-1999.pdf chapter 7 "MAC frame formats" */
-+	if (unlikely((hdr->fc & WF_FC_PVERi) != 0)) {
-+		printk_ratelimited(KERN_INFO "rx: unsupported 802.11 protocol\n");
-+		goto end;
-+	}
-+
-+	ftype = hdr->fc & WF_FC_FTYPEi;
-+	fstype = hdr->fc & WF_FC_FSTYPEi;
-+
-+	switch (ftype) {
-+	/* check data frames first, for speed */
-+	case WF_FTYPE_DATAi:
-+		switch (fstype) {
-+		case WF_FSTYPE_DATAONLYi:
-+			if (acx_l_handle_dup(adev, hdr->seq))
-+				break; /* a dup, simply discard it */
-+
-+			/* TODO:
-+			if (WF_FC_FROMTODSi == (hdr->fc & WF_FC_FROMTODSi)) {
-+				result = acx_l_process_data_frame_wds(adev, rxbuf);
-+				break;
-+			}
-+			*/
-+
-+			switch (adev->mode) {
-+			case ACX_MODE_3_AP:
-+				result = acx_l_process_data_frame_master(adev, rxbuf);
-+				break;
-+			case ACX_MODE_0_ADHOC:
-+			case ACX_MODE_2_STA:
-+				result = acx_l_process_data_frame_client(adev, rxbuf);
-+				break;
-+			}
-+		case WF_FSTYPE_DATA_CFACKi:
-+		case WF_FSTYPE_DATA_CFPOLLi:
-+		case WF_FSTYPE_DATA_CFACK_CFPOLLi:
-+		case WF_FSTYPE_CFPOLLi:
-+		case WF_FSTYPE_CFACK_CFPOLLi:
-+		/*   see above.
-+			acx_process_class_frame(adev, rxbuf, 3); */
-+			break;
-+		case WF_FSTYPE_NULLi:
-+			/* acx_l_process_NULL_frame(adev, rxbuf, 3); */
-+			break;
-+		/* FIXME: same here, see above */
-+		case WF_FSTYPE_CFACKi:
-+		default:
-+			break;
-+		}
-+		break;
-+	case WF_FTYPE_MGMTi:
-+		result = acx_l_process_mgmt_frame(adev, rxbuf);
-+		break;
-+	case WF_FTYPE_CTLi:
-+		if (fstype == WF_FSTYPE_PSPOLLi)
-+			result = OK;
-+		/*   this call is irrelevant, since
-+		 *   acx_process_class_frame is a stub, so return
-+		 *   immediately instead.
-+		 * return acx_process_class_frame(adev, rxbuf, 3); */
-+		break;
-+	default:
-+		break;
-+	}
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_rxbuf
-+**
-+** NB: used by USB code also
-+*/
-+void
-+acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	struct wlan_hdr *hdr;
-+	unsigned int qual;
-+	int buf_len;
-+	u16 fc;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+	fc = le16_to_cpu(hdr->fc);
-+	/* length of frame from control field to first byte of FCS */
-+	buf_len = RXBUF_BYTES_RCVD(adev, rxbuf);
-+
-+	if ( ((WF_FC_FSTYPE & fc) != WF_FSTYPE_BEACON)
-+	  || (acx_debug & L_XFER_BEACON)
-+	) {
-+		log(L_XFER|L_DATA, "rx: %s "
-+			"time:%u len:%u signal:%u SNR:%u macstat:%02X "
-+			"phystat:%02X phyrate:%u status:%u\n",
-+			acx_get_packet_type_string(fc),
-+			le32_to_cpu(rxbuf->time),
-+			buf_len,
-+			acx_signal_to_winlevel(rxbuf->phy_level),
-+			acx_signal_to_winlevel(rxbuf->phy_snr),
-+			rxbuf->mac_status,
-+			rxbuf->phy_stat_baseband,
-+			rxbuf->phy_plcp_signal,
-+			adev->status);
-+	}
-+
-+	if (unlikely(acx_debug & L_DATA)) {
-+		printk("rx: 802.11 buf[%u]: ", buf_len);
-+		acx_dump_bytes(hdr, buf_len);
-+	}
-+
-+	/* FIXME: should check for Rx errors (rxbuf->mac_status?
-+	 * discard broken packets - but NOT for monitor!)
-+	 * and update Rx packet statistics here */
-+
-+	if (unlikely(adev->mode == ACX_MODE_MONITOR)) {
-+		acx_l_rxmonitor(adev, rxbuf);
-+	} else if (likely(buf_len >= WLAN_HDR_A3_LEN)) {
-+		acx_l_rx_ieee802_11_frame(adev, rxbuf);
-+	} else {
-+		log(L_DEBUG|L_XFER|L_DATA,
-+		       "rx: NOT receiving packet (%s): "
-+		       "size too small (%u)\n",
-+		       acx_get_packet_type_string(fc),
-+		       buf_len);
-+	}
-+
-+	/* Now check Rx quality level, AFTER processing packet.
-+	 * I tried to figure out how to map these levels to dBm
-+	 * values, but for the life of me I really didn't
-+	 * manage to get it. Either these values are not meant to
-+	 * be expressed in dBm, or it's some pretty complicated
-+	 * calculation. */
-+
-+#ifdef FROM_SCAN_SOURCE_ONLY
-+	/* only consider packets originating from the MAC
-+	 * address of the device that's managing our BSSID.
-+	 * Disable it for now, since it removes information (levels
-+	 * from different peers) and slows the Rx path. */
-+	if (adev->ap_client
-+	 && mac_is_equal(hdr->a2, adev->ap_client->address)) {
-+#endif
-+		adev->wstats.qual.level = acx_signal_to_winlevel(rxbuf->phy_level);
-+		adev->wstats.qual.noise = acx_signal_to_winlevel(rxbuf->phy_snr);
-+#ifndef OLD_QUALITY
-+		qual = acx_signal_determine_quality(adev->wstats.qual.level,
-+				adev->wstats.qual.noise);
-+#else
-+		qual = (adev->wstats.qual.noise <= 100) ?
-+				100 - adev->wstats.qual.noise : 0;
-+#endif
-+		adev->wstats.qual.qual = qual;
-+		adev->wstats.qual.updated = 7; /* all 3 indicators updated */
-+#ifdef FROM_SCAN_SOURCE_ONLY
-+	}
-+#endif
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_handle_txrate_auto
-+**
-+** Theory of operation:
-+** client->rate_cap is a bitmask of rates client is capable of.
-+** client->rate_cfg is a bitmask of allowed (configured) rates.
-+** It is set as a result of iwconfig rate N [auto]
-+** or iwpriv set_rates "N,N,N N,N,N" commands.
-+** It can be fixed (e.g. 0x0080 == 18Mbit only),
-+** auto (0x00ff == 18Mbit or any lower value),
-+** and code handles any bitmask (0x1081 == try 54Mbit,18Mbit,1Mbit _only_).
-+**
-+** client->rate_cur is a value for rate111 field in tx descriptor.
-+** It is always set to txrate_cfg sans zero or more most significant
-+** bits. This routine handles selection of new rate_cur value depending on
-+** outcome of last tx event.
-+**
-+** client->rate_100 is a precalculated rate value for acx100
-+** (we can do without it, but will need to calculate it on each tx).
-+**
-+** You cannot configure mixed usage of 5.5 and/or 11Mbit rate
-+** with PBCC and CCK modulation. Either both at CCK or both at PBCC.
-+** In theory you can implement it, but so far it is considered not worth doing.
-+**
-+** 22Mbit, of course, is PBCC always. */
-+
-+/* maps acx100 tx descr rate field to acx111 one */
-+static u16
-+rate100to111(u8 r)
-+{
-+	switch (r) {
-+	case RATE100_1:	return RATE111_1;
-+	case RATE100_2:	return RATE111_2;
-+	case RATE100_5:
-+	case (RATE100_5 | RATE100_PBCC511):	return RATE111_5;
-+	case RATE100_11:
-+	case (RATE100_11 | RATE100_PBCC511):	return RATE111_11;
-+	case RATE100_22:	return RATE111_22;
-+	default:
-+		printk("acx: unexpected acx100 txrate: %u! "
-+			"Please report\n", r);
-+		return RATE111_1;
-+	}
-+}
-+
-+
-+void
-+acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc,
-+			u16 cur, u8 rate100, u16 rate111,
-+			u8 error, int pkts_to_ignore)
-+{
-+	u16 sent_rate;
-+	int slower_rate_was_used;
-+
-+	/* vda: hmm. current code will do this:
-+	** 1. send packets at 11 Mbit, stepup++
-+	** 2. will try to send at 22Mbit. hardware will see no ACK,
-+	**    retries at 11Mbit, success. code notes that used rate
-+	**    is lower. stepup = 0, fallback++
-+	** 3. repeat step 2 fallback_count times. Fall back to
-+	**    11Mbit. go to step 1.
-+	** If stepup_count is large (say, 16) and fallback_count
-+	** is small (3), this wouldn't be too bad wrt throughput */
-+
-+	if (unlikely(!cur)) {
-+		printk("acx: BUG! ratemask is empty\n");
-+		return; /* or else we may lock up the box */
-+	}
-+
-+	/* do some preparations, i.e. calculate the one rate that was
-+	 * used to send this packet */
-+	if (IS_ACX111(adev)) {
-+		sent_rate = 1 << highest_bit(rate111 & RATE111_ALL);
-+	} else {
-+		sent_rate = rate100to111(rate100);
-+	}
-+	/* sent_rate has only one bit set now, corresponding to tx rate
-+	 * which was used by hardware to tx this particular packet */
-+
-+	/* now do the actual auto rate management */
-+	log(L_XFER, "tx: %sclient=%p/"MACSTR" used=%04X cur=%04X cfg=%04X "
-+		"__=%u/%u ^^=%u/%u\n",
-+		(txc->ignore_count > 0) ? "[IGN] " : "",
-+		txc, MAC(txc->address), sent_rate, cur, txc->rate_cfg,
-+		txc->fallback_count, adev->fallback_threshold,
-+		txc->stepup_count, adev->stepup_threshold
-+	);
-+
-+	/* we need to ignore old packets already in the tx queue since
-+	 * they use older rate bytes configured before our last rate change,
-+	 * otherwise our mechanism will get confused by interpreting old data.
-+	 * Do it after logging above */
-+	if (txc->ignore_count) {
-+		txc->ignore_count--;
-+		return;
-+	}
-+
-+	/* true only if the only nonzero bit in sent_rate is
-+	** less significant than highest nonzero bit in cur */
-+	slower_rate_was_used = ( cur > ((sent_rate<<1)-1) );
-+
-+	if (slower_rate_was_used || error) {
-+		txc->stepup_count = 0;
-+		if (++txc->fallback_count <= adev->fallback_threshold)
-+			return;
-+		txc->fallback_count = 0;
-+
-+		/* clear highest 1 bit in cur */
-+		sent_rate = RATE111_54;
-+		while (!(cur & sent_rate)) sent_rate >>= 1;
-+		CLEAR_BIT(cur, sent_rate);
-+		if (!cur) /* we can't disable all rates! */
-+			cur = sent_rate;
-+		log(L_XFER, "tx: falling back to ratemask %04X\n", cur);
-+
-+	} else { /* there was neither lower rate nor error */
-+		txc->fallback_count = 0;
-+		if (++txc->stepup_count <= adev->stepup_threshold)
-+			return;
-+		txc->stepup_count = 0;
-+
-+		/* Sanitize. Sort of not needed, but I dont trust hw that much...
-+		** what if it can report bogus tx rates sometimes? */
-+		while (!(cur & sent_rate)) sent_rate >>= 1;
-+
-+		/* try to find a higher sent_rate that isn't yet in our
-+		 * current set, but is an allowed cfg */
-+		while (1) {
-+			sent_rate <<= 1;
-+			if (sent_rate > txc->rate_cfg)
-+				/* no higher rates allowed by config */
-+				return;
-+			if (!(cur & sent_rate) && (txc->rate_cfg & sent_rate))
-+				/* found */
-+				break;
-+			/* not found, try higher one */
-+		}
-+		SET_BIT(cur, sent_rate);
-+		log(L_XFER, "tx: stepping up to ratemask %04X\n", cur);
-+	}
-+
-+	txc->rate_cur = cur;
-+	txc->ignore_count = pkts_to_ignore;
-+	/* calculate acx100 style rate byte if needed */
-+	if (IS_ACX100(adev)) {
-+		txc->rate_100 = acx_bitpos2rate100[highest_bit(cur)];
-+	}
-+}
-+
-+
-+/***********************************************************************
-+** acx_i_start_xmit
-+**
-+** Called by network core. Can be called outside of process context.
-+*/
-+int
-+acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	tx_t *tx;
-+	void *txbuf;
-+	unsigned long flags;
-+	int txresult = NOT_OK;
-+	int len;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!skb)) {
-+		/* indicate success */
-+		txresult = OK;
-+		goto end_no_unlock;
-+	}
-+	if (unlikely(!adev)) {
-+		goto end_no_unlock;
-+	}
-+
-+	acx_lock(adev, flags);
-+
-+	if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) {
-+		goto end;
-+	}
-+	if (unlikely(adev->mode == ACX_MODE_OFF)) {
-+		goto end;
-+	}
-+	if (unlikely(acx_queue_stopped(ndev))) {
-+		log(L_DEBUG, "%s: called when queue stopped\n", __func__);
-+		goto end;
-+	}
-+	if (unlikely(ACX_STATUS_4_ASSOCIATED != adev->status)) {
-+		log(L_XFER, "trying to xmit, but not associated yet: "
-+			"aborting...\n");
-+		/* silently drop the packet, since we're not connected yet */
-+		txresult = OK;
-+		/* ...but indicate an error nevertheless */
-+		adev->stats.tx_errors++;
-+		goto end;
-+	}
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (unlikely(!tx)) {
-+#ifndef ACX_MEM
-+	  /*
-+	   * generic slave interface has to make do with the tiny amount, around
-+	   * 7k, of transmit buffer space on the ACX itself.  It is likely this will
-+	   * frequently be full.
-+	   */
-+		printk_ratelimited("%s: start_xmit: txdesc ring is full, "
-+			"dropping tx\n", ndev->name);
-+#endif
-+		txresult = NOT_OK;
-+		goto end;
-+	}
-+
-+	txbuf = acx_l_get_txbuf(adev, tx);
-+	if (unlikely(!txbuf)) {
-+		/* Card was removed */
-+		txresult = NOT_OK;
-+		acx_l_dealloc_tx(adev, tx);
-+		goto end;
-+	}
-+	len = acx_ether_to_txbuf(adev, txbuf, skb);
-+	if (unlikely(len < 0)) {
-+		/* Error in packet conversion */
-+		txresult = NOT_OK;
-+		acx_l_dealloc_tx(adev, tx);
-+		goto end;
-+	}
-+	acx_l_tx_data(adev, tx, len);
-+	ndev->trans_start = jiffies;
-+
-+	txresult = OK;
-+	adev->stats.tx_packets++;
-+	adev->stats.tx_bytes += skb->len;
-+
-+end:
-+	acx_unlock(adev, flags);
-+
-+end_no_unlock:
-+	if ((txresult == OK) && skb)
-+		dev_kfree_skb_any(skb);
-+
-+	FN_EXIT1(txresult);
-+	return txresult;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_update_ratevector
-+**
-+** Updates adev->rate_supported[_len] according to rate_{basic,oper}
-+*/
-+const u8
-+acx_bitpos2ratebyte[] = {
-+	DOT11RATEBYTE_1,
-+	DOT11RATEBYTE_2,
-+	DOT11RATEBYTE_5_5,
-+	DOT11RATEBYTE_6_G,
-+	DOT11RATEBYTE_9_G,
-+	DOT11RATEBYTE_11,
-+	DOT11RATEBYTE_12_G,
-+	DOT11RATEBYTE_18_G,
-+	DOT11RATEBYTE_22,
-+	DOT11RATEBYTE_24_G,
-+	DOT11RATEBYTE_36_G,
-+	DOT11RATEBYTE_48_G,
-+	DOT11RATEBYTE_54_G,
-+};
-+
-+void
-+acx_l_update_ratevector(acx_device_t *adev)
-+{
-+	u16 bcfg = adev->rate_basic;
-+	u16 ocfg = adev->rate_oper;
-+	u8 *supp = adev->rate_supported;
-+	const u8 *dot11 = acx_bitpos2ratebyte;
-+
-+	FN_ENTER;
-+
-+	while (ocfg) {
-+		if (ocfg & 1) {
-+			*supp = *dot11;
-+			if (bcfg & 1) {
-+				*supp |= 0x80;
-+			}
-+			supp++;
-+		}
-+		dot11++;
-+		ocfg >>= 1;
-+		bcfg >>= 1;
-+	}
-+	adev->rate_supported_len = supp - adev->rate_supported;
-+	if (acx_debug & L_ASSOC) {
-+		printk("new ratevector: ");
-+		acx_dump_bytes(adev->rate_supported, adev->rate_supported_len);
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_init
-+*/
-+static void
-+acx_l_sta_list_init(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+	memset(adev->sta_hash_tab, 0, sizeof(adev->sta_hash_tab));
-+	memset(adev->sta_list, 0, sizeof(adev->sta_list));
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_get_from_hash
-+*/
-+static inline client_t*
-+acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address)
-+{
-+	return adev->sta_hash_tab[address[5] % VEC_SIZE(adev->sta_hash_tab)];
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_get
-+*/
-+client_t*
-+acx_l_sta_list_get(acx_device_t *adev, const u8 *address)
-+{
-+	client_t *client;
-+	FN_ENTER;
-+	client = acx_l_sta_list_get_from_hash(adev, address);
-+	while (client) {
-+		if (mac_is_equal(address, client->address)) {
-+			client->mtime = jiffies;
-+			break;
-+		}
-+		client = client->next;
-+	}
-+	FN_EXIT0;
-+	return client;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_del
-+*/
-+void
-+acx_l_sta_list_del(acx_device_t *adev, client_t *victim)
-+{
-+	client_t *client, *next;
-+
-+	client = acx_l_sta_list_get_from_hash(adev, victim->address);
-+	next = client;
-+	/* tricky. next = client on first iteration only,
-+	** on all other iters next = client->next */
-+	while (next) {
-+		if (next == victim) {
-+			client->next = victim->next;
-+			/* Overkill */
-+			memset(victim, 0, sizeof(*victim));
-+			break;
-+		}
-+		client = next;
-+		next = client->next;
-+	}
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_alloc
-+**
-+** Never fails - will evict oldest client if needed
-+*/
-+static client_t*
-+acx_l_sta_list_alloc(acx_device_t *adev)
-+{
-+	int i;
-+	unsigned long age, oldest_age;
-+	client_t *client, *oldest;
-+
-+	FN_ENTER;
-+
-+	oldest = &adev->sta_list[0];
-+	oldest_age = 0;
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		client = &adev->sta_list[i];
-+
-+		if (!client->used) {
-+			goto found;
-+		} else {
-+			age = jiffies - client->mtime;
-+			if (oldest_age < age) {
-+				oldest_age = age;
-+				oldest = client;
-+			}
-+		}
-+	}
-+	acx_l_sta_list_del(adev, oldest);
-+	client = oldest;
-+found:
-+	memset(client, 0, sizeof(*client));
-+	FN_EXIT0;
-+	return client;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_add
-+**
-+** Never fails - will evict oldest client if needed
-+*/
-+/* In case we will reimplement it differently... */
-+#define STA_LIST_ADD_CAN_FAIL 0
-+
-+static client_t*
-+acx_l_sta_list_add(acx_device_t *adev, const u8 *address)
-+{
-+	client_t *client;
-+	int index;
-+
-+	FN_ENTER;
-+
-+	client = acx_l_sta_list_alloc(adev);
-+
-+	client->mtime = jiffies;
-+	MAC_COPY(client->address, address);
-+	client->used = CLIENT_EXIST_1;
-+	client->auth_alg = WLAN_AUTH_ALG_SHAREDKEY;
-+	client->auth_step = 1;
-+	/* give some tentative peer rate values
-+	** (needed because peer may do auth without probing us first,
-+	** thus we'll have no idea of peer's ratevector yet).
-+	** Will be overwritten by scanning or assoc code */
-+	client->rate_cap = adev->rate_basic;
-+	client->rate_cfg = adev->rate_basic;
-+	client->rate_cur = 1 << lowest_bit(adev->rate_basic);
-+
-+	index = address[5] % VEC_SIZE(adev->sta_hash_tab);
-+	client->next = adev->sta_hash_tab[index];
-+	adev->sta_hash_tab[index] = client;
-+
-+	acxlog_mac(L_ASSOC, "sta_list_add: sta=", address, "\n");
-+
-+	FN_EXIT0;
-+	return client;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_get_or_add
-+**
-+** Never fails - will evict oldest client if needed
-+*/
-+static client_t*
-+acx_l_sta_list_get_or_add(acx_device_t *adev, const u8 *address)
-+{
-+	client_t *client = acx_l_sta_list_get(adev, address);
-+	if (!client)
-+		client = acx_l_sta_list_add(adev, address);
-+	return client;
-+}
-+
-+
-+/***********************************************************************
-+** acx_set_status
-+**
-+** This function is called in many atomic regions, must not sleep
-+**
-+** This function does not need locking UNLESS you call it
-+** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can
-+** wake queue. This can race with stop_queue elsewhere.
-+** See acx_stop_queue comment. */
-+void
-+acx_set_status(acx_device_t *adev, u16 new_status)
-+{
-+#define QUEUE_OPEN_AFTER_ASSOC 1 /* this really seems to be needed now */
-+	u16 old_status = adev->status;
-+
-+	FN_ENTER;
-+
-+	log(L_ASSOC, "%s(%d):%s\n",
-+	       __func__, new_status, acx_get_status_name(new_status));
-+
-+	/* wireless_send_event never sleeps */
-+	if (ACX_STATUS_4_ASSOCIATED == new_status) {
-+		union iwreq_data wrqu;
-+
-+		wrqu.data.length = 0;
-+		wrqu.data.flags = 0;
-+		wireless_send_event(adev->ndev, SIOCGIWSCAN, &wrqu, NULL);
-+
-+		wrqu.data.length = 0;
-+		wrqu.data.flags = 0;
-+		MAC_COPY(wrqu.ap_addr.sa_data, adev->bssid);
-+		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-+		wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL);
-+	} else {
-+		union iwreq_data wrqu;
-+
-+		/* send event with empty BSSID to indicate we're not associated */
-+		MAC_ZERO(wrqu.ap_addr.sa_data);
-+		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-+		wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL);
-+	}
-+
-+	adev->status = new_status;
-+
-+	switch (new_status) {
-+	case ACX_STATUS_1_SCANNING:
-+		adev->scan_retries = 0;
-+		/* 1.0 s initial scan time */
-+		acx_set_timer(adev, 1000000);
-+		break;
-+	case ACX_STATUS_2_WAIT_AUTH:
-+	case ACX_STATUS_3_AUTHENTICATED:
-+		adev->auth_or_assoc_retries = 0;
-+		acx_set_timer(adev, 1500000); /* 1.5 s */
-+		break;
-+	}
-+
-+#if QUEUE_OPEN_AFTER_ASSOC
-+	if (new_status == ACX_STATUS_4_ASSOCIATED)	{
-+		if (old_status < ACX_STATUS_4_ASSOCIATED) {
-+			/* ah, we're newly associated now,
-+			 * so let's indicate carrier */
-+			acx_carrier_on(adev->ndev, "after association");
-+			acx_wake_queue(adev->ndev, "after association");
-+		}
-+	} else {
-+		/* not associated any more, so let's kill carrier */
-+		if (old_status >= ACX_STATUS_4_ASSOCIATED) {
-+			acx_carrier_off(adev->ndev, "after losing association");
-+			acx_stop_queue(adev->ndev, "after losing association");
-+		}
-+	}
-+#endif
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_i_timer
-+**
-+** Fires up periodically. Used to kick scan/auth/assoc if something goes wrong
-+*/
-+void
-+acx_i_timer(unsigned long address)
-+{
-+	unsigned long flags;
-+	acx_device_t *adev = (acx_device_t*)address;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	log(L_DEBUG|L_ASSOC, "%s: adev->status=%d (%s)\n",
-+		__func__, adev->status, acx_get_status_name(adev->status));
-+
-+	switch (adev->status) {
-+	case ACX_STATUS_1_SCANNING:
-+		/* was set to 0 by set_status() */
-+		if (++adev->scan_retries < 7) {
-+			acx_set_timer(adev, 1000000);
-+			/* used to interrogate for scan status.
-+			** We rely on SCAN_COMPLETE IRQ instead */
-+			log(L_ASSOC, "continuing scan (%d sec)\n",
-+					adev->scan_retries);
-+		} else {
-+			log(L_ASSOC, "stopping scan\n");
-+			/* send stop_scan cmd when we leave the interrupt context,
-+			 * and make a decision what to do next (COMPLETE_SCAN) */
-+			acx_schedule_task(adev,
-+				ACX_AFTER_IRQ_CMD_STOP_SCAN + ACX_AFTER_IRQ_COMPLETE_SCAN);
-+		}
-+		break;
-+	case ACX_STATUS_2_WAIT_AUTH:
-+		/* was set to 0 by set_status() */
-+		if (++adev->auth_or_assoc_retries < 10) {
-+			log(L_ASSOC, "resend authen1 request (attempt %d)\n",
-+					adev->auth_or_assoc_retries + 1);
-+			acx_l_transmit_authen1(adev);
-+		} else {
-+			/* time exceeded: fall back to scanning mode */
-+			log(L_ASSOC,
-+			       "authen1 request reply timeout, giving up\n");
-+			/* we are a STA, need to find AP anyhow */
-+			acx_set_status(adev, ACX_STATUS_1_SCANNING);
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN);
-+		}
-+		/* used to be 1500000, but some other driver uses 2.5s */
-+		acx_set_timer(adev, 2500000);
-+		break;
-+	case ACX_STATUS_3_AUTHENTICATED:
-+		/* was set to 0 by set_status() */
-+		if (++adev->auth_or_assoc_retries < 10) {
-+			log(L_ASSOC, "resend assoc request (attempt %d)\n",
-+					adev->auth_or_assoc_retries + 1);
-+			acx_l_transmit_assoc_req(adev);
-+		} else {
-+			/* time exceeded: give up */
-+			log(L_ASSOC,
-+				"association request reply timeout, giving up\n");
-+			/* we are a STA, need to find AP anyhow */
-+			acx_set_status(adev, ACX_STATUS_1_SCANNING);
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN);
-+		}
-+		acx_set_timer(adev, 2500000); /* see above */
-+		break;
-+	case ACX_STATUS_4_ASSOCIATED:
-+	default:
-+		break;
-+	}
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_set_timer
-+**
-+** Sets the 802.11 state management timer's timeout.
-+*/
-+void
-+acx_set_timer(acx_device_t *adev, int timeout_us)
-+{
-+	FN_ENTER;
-+
-+	log(L_DEBUG|L_IRQ, "%s(%u ms)\n", __func__, timeout_us/1000);
-+	if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) {
-+		printk("attempt to set the timer "
-+			"when the card interface is not up!\n");
-+		goto end;
-+	}
-+
-+	/* first check if the timer was already initialized, THEN modify it */
-+	if (adev->mgmt_timer.function) {
-+		mod_timer(&adev->mgmt_timer,
-+				jiffies + (timeout_us * HZ / 1000000));
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_assocresp
-+**
-+** We are an AP here
-+*/
-+static const u8
-+dot11ratebyte[] = {
-+	DOT11RATEBYTE_1,
-+	DOT11RATEBYTE_2,
-+	DOT11RATEBYTE_5_5,
-+	DOT11RATEBYTE_6_G,
-+	DOT11RATEBYTE_9_G,
-+	DOT11RATEBYTE_11,
-+	DOT11RATEBYTE_12_G,
-+	DOT11RATEBYTE_18_G,
-+	DOT11RATEBYTE_22,
-+	DOT11RATEBYTE_24_G,
-+	DOT11RATEBYTE_36_G,
-+	DOT11RATEBYTE_48_G,
-+	DOT11RATEBYTE_54_G,
-+};
-+
-+static inline int
-+find_pos(const u8 *p, int size, u8 v)
-+{
-+	int i;
-+	for (i = 0; i < size; i++)
-+		if (p[i] == v)
-+			return i;
-+	/* printk a message about strange byte? */
-+	return 0;
-+}
-+
-+static void
-+add_bits_to_ratemasks(u8* ratevec, int len, u16* brate, u16* orate)
-+{
-+	while (len--) {
-+		int n = 1 << find_pos(dot11ratebyte,
-+				sizeof(dot11ratebyte), *ratevec & 0x7f);
-+		if (*ratevec & 0x80)
-+			*brate |= n;
-+		*orate |= n;
-+		ratevec++;
-+	}
-+}
-+
-+static int
-+acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct assocresp_frame_body *body;
-+	u8 *p;
-+	const u8 *da;
-+	/* const u8 *sa; */
-+	const u8 *bssid;
-+	client_t *clt;
-+
-+	FN_ENTER;
-+
-+	/* sa = req->hdr->a1; */
-+	da = req->hdr->a2;
-+	bssid = req->hdr->a3;
-+
-+	clt = acx_l_sta_list_get(adev, da);
-+	if (!clt)
-+		goto ok;
-+
-+	/* Assoc without auth is a big no-no */
-+	/* Let's be liberal: if already assoc'ed STA sends assoc req again,
-+	** we won't be rude */
-+	if (clt->used != CLIENT_AUTHENTICATED_2
-+	 && clt->used != CLIENT_ASSOCIATED_3) {
-+		acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH);
-+		goto bad;
-+	}
-+
-+	clt->used = CLIENT_ASSOCIATED_3;
-+
-+	if (clt->aid == 0)
-+		clt->aid = ++adev->aid;
-+	clt->cap_info = ieee2host16(*(req->cap_info));
-+
-+	/* We cheat here a bit. We don't really care which rates are flagged
-+	** as basic by the client, so we stuff them in single ratemask */
-+	clt->rate_cap = 0;
-+	if (req->supp_rates)
-+		add_bits_to_ratemasks(req->supp_rates->rates,
-+			req->supp_rates->len, &clt->rate_cap, &clt->rate_cap);
-+	if (req->ext_rates)
-+		add_bits_to_ratemasks(req->ext_rates->rates,
-+			req->ext_rates->len, &clt->rate_cap, &clt->rate_cap);
-+	/* We can check that client supports all basic rates,
-+	** and deny assoc if not. But let's be liberal, right? ;) */
-+	clt->rate_cfg = clt->rate_cap & adev->rate_oper;
-+	if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper);
-+	clt->rate_cur = 1 << lowest_bit(clt->rate_cfg);
-+	if (IS_ACX100(adev))
-+		clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)];
-+	clt->fallback_count = clt->stepup_count = 0;
-+	clt->ignore_count = 16;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_ASSOCRESPi;
-+	head->dur = req->hdr->dur;
-+	MAC_COPY(head->da, da);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, bssid);
-+	head->seq = req->hdr->seq;
-+
-+	body->cap_info = host2ieee16(adev->capabilities);
-+	body->status = host2ieee16(0);
-+	body->aid = host2ieee16(clt->aid);
-+	p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len,
-+							adev->rate_supported);
-+	p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len,
-+							adev->rate_supported);
-+
-+	acx_l_tx_data(adev, tx, p - (u8*)head);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+* acx_l_transmit_reassocresp
-+
-+You may be wondering, just like me, what the hell ReAuth is.
-+In practice it was seen sent by STA when STA feels like losing connection.
-+
-+[802.11]
-+
-+5.4.2.3 Reassociation
-+
-+Association is sufficient for no-transition message delivery between
-+IEEE 802.11 stations. Additional functionality is needed to support
-+BSS-transition mobility. The additional required functionality
-+is provided by the reassociation service. Reassociation is a DSS.
-+The reassociation service is invoked to 'move' a current association
-+from one AP to another. This keeps the DS informed of the current
-+mapping between AP and STA as the station moves from BSS to BSS within
-+an ESS. Reassociation also enables changing association attributes
-+of an established association while the STA remains associated with
-+the same AP. Reassociation is always initiated by the mobile STA.
-+
-+5.4.3.1 Authentication
-+...
-+A STA may be authenticated with many other STAs at any given instant.
-+
-+5.4.3.1.1 Preauthentication
-+
-+Because the authentication process could be time-consuming (depending
-+on the authentication protocol in use), the authentication service can
-+be invoked independently of the association service. Preauthentication
-+is typically done by a STA while it is already associated with an AP
-+(with which it previously authenticated). IEEE 802.11 does not require
-+that STAs preauthenticate with APs. However, authentication is required
-+before an association can be established. If the authentication is left
-+until reassociation time, this may impact the speed with which a STA can
-+reassociate between APs, limiting BSS-transition mobility performance.
-+The use of preauthentication takes the authentication service overhead
-+out of the time-critical reassociation process.
-+
-+5.7.3 Reassociation
-+
-+For a STA to reassociate, the reassociation service causes the following
-+message to occur:
-+
-+  Reassociation request
-+
-+* Message type: Management
-+* Message subtype: Reassociation request
-+* Information items:
-+  - IEEE address of the STA
-+  - IEEE address of the AP with which the STA will reassociate
-+  - IEEE address of the AP with which the STA is currently associated
-+  - ESSID
-+* Direction of message: From STA to 'new' AP
-+
-+The address of the current AP is included for efficiency. The inclusion
-+of the current AP address facilitates MAC reassociation to be independent
-+of the DS implementation.
-+
-+  Reassociation response
-+* Message type: Management
-+* Message subtype: Reassociation response
-+* Information items:
-+  - Result of the requested reassociation. (success/failure)
-+  - If the reassociation is successful, the response shall include the AID.
-+* Direction of message: From AP to STA
-+
-+7.2.3.6 Reassociation Request frame format
-+
-+The frame body of a management frame of subtype Reassociation Request
-+contains the information shown in Table 9.
-+
-+Table 9 Reassociation Request frame body
-+Order Information
-+1 Capability information
-+2 Listen interval
-+3 Current AP address
-+4 SSID
-+5 Supported rates
-+
-+7.2.3.7 Reassociation Response frame format
-+
-+The frame body of a management frame of subtype Reassociation Response
-+contains the information shown in Table 10.
-+
-+Table 10 Reassociation Response frame body
-+Order Information
-+1 Capability information
-+2 Status code
-+3 Association ID (AID)
-+4 Supported rates
-+
-+*/
-+static int
-+acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct reassocresp_frame_body *body;
-+	u8 *p;
-+	const u8 *da;
-+	/* const u8 *sa; */
-+	const u8 *bssid;
-+	client_t *clt;
-+
-+	FN_ENTER;
-+
-+	/* sa = req->hdr->a1; */
-+	da = req->hdr->a2;
-+	bssid = req->hdr->a3;
-+
-+	/* Must be already authenticated, so it must be in the list */
-+	clt = acx_l_sta_list_get(adev, da);
-+	if (!clt)
-+		goto ok;
-+
-+	/* Assoc without auth is a big no-no */
-+	/* Already assoc'ed STAs sending ReAssoc req are ok per 802.11 */
-+	if (clt->used != CLIENT_AUTHENTICATED_2
-+	 && clt->used != CLIENT_ASSOCIATED_3) {
-+		acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH);
-+		goto bad;
-+	}
-+
-+	clt->used = CLIENT_ASSOCIATED_3;
-+	if (clt->aid == 0) {
-+		clt->aid = ++adev->aid;
-+	}
-+	if (req->cap_info)
-+		clt->cap_info = ieee2host16(*(req->cap_info));
-+
-+	/* We cheat here a bit. We don't really care which rates are flagged
-+	** as basic by the client, so we stuff them in single ratemask */
-+	clt->rate_cap = 0;
-+	if (req->supp_rates)
-+		add_bits_to_ratemasks(req->supp_rates->rates,
-+			req->supp_rates->len, &clt->rate_cap, &clt->rate_cap);
-+	if (req->ext_rates)
-+		add_bits_to_ratemasks(req->ext_rates->rates,
-+			req->ext_rates->len, &clt->rate_cap, &clt->rate_cap);
-+	/* We can check that client supports all basic rates,
-+	** and deny assoc if not. But let's be liberal, right? ;) */
-+	clt->rate_cfg = clt->rate_cap & adev->rate_oper;
-+	if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper);
-+	clt->rate_cur = 1 << lowest_bit(clt->rate_cfg);
-+	if (IS_ACX100(adev))
-+		clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)];
-+
-+	clt->fallback_count = clt->stepup_count = 0;
-+	clt->ignore_count = 16;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto ok;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto ok;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_REASSOCRESPi;
-+	head->dur = req->hdr->dur;
-+	MAC_COPY(head->da, da);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, bssid);
-+	head->seq = req->hdr->seq;
-+
-+	/* IEs: 1. caps */
-+	body->cap_info = host2ieee16(adev->capabilities);
-+	/* 2. status code */
-+	body->status = host2ieee16(0);
-+	/* 3. AID */
-+	body->aid = host2ieee16(clt->aid);
-+	/* 4. supp rates */
-+	p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len,
-+							adev->rate_supported);
-+	/* 5. ext supp rates */
-+	p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len,
-+							adev->rate_supported);
-+
-+	acx_l_tx_data(adev, tx, p - (u8*)head);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_disassoc_from_sta
-+*/
-+static void
-+acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req)
-+{
-+	const u8 *ta;
-+	client_t *clt;
-+
-+	FN_ENTER;
-+
-+	ta = req->hdr->a2;
-+	clt = acx_l_sta_list_get(adev, ta);
-+	if (!clt)
-+		goto end;
-+
-+	if (clt->used != CLIENT_ASSOCIATED_3
-+	 && clt->used != CLIENT_AUTHENTICATED_2) {
-+		/* it's disassociating, but it's
-+		** not even authenticated! Let it know that */
-+		acxlog_mac(L_ASSOC|L_XFER, "peer ", ta, "has sent disassoc "
-+			"req but it is not even auth'ed! sending deauth\n");
-+		acx_l_transmit_deauthen(adev, ta,
-+			WLAN_MGMT_REASON_CLASS2_NONAUTH);
-+		clt->used = CLIENT_EXIST_1;
-+	} else {
-+		/* mark it as auth'ed only */
-+		clt->used = CLIENT_AUTHENTICATED_2;
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_deauthen_from_sta
-+*/
-+static void
-+acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req)
-+{
-+	const wlan_hdr_t *hdr;
-+	client_t *client;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if (acx_debug & L_ASSOC) {
-+		acx_print_mac("got deauth from sta:", hdr->a2, " ");
-+		acx_print_mac("a1:", hdr->a1, " ");
-+		acx_print_mac("a3:", hdr->a3, " ");
-+		acx_print_mac("adev->addr:", adev->dev_addr, " ");
-+		acx_print_mac("adev->bssid:", adev->bssid, "\n");
-+	}
-+
-+	if (!mac_is_equal(adev->dev_addr, hdr->a1)) {
-+		goto end;
-+	}
-+
-+	client = acx_l_sta_list_get(adev, hdr->a2);
-+	if (!client) {
-+		goto end;
-+	}
-+	client->used = CLIENT_EXIST_1;
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_disassoc_from_ap
-+*/
-+static void
-+acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req)
-+{
-+	FN_ENTER;
-+
-+	if (!adev->ap_client) {
-+		/* Hrm, we aren't assoc'ed yet anyhow... */
-+		goto end;
-+	}
-+
-+	printk("%s: got disassoc frame with reason %d (%s)\n",
-+		adev->ndev->name, *req->reason,
-+		acx_wlan_reason_str(*req->reason));
-+
-+	if (mac_is_equal(adev->dev_addr, req->hdr->a1)) {
-+		acx_l_transmit_deauthen(adev, adev->bssid,
-+				WLAN_MGMT_REASON_DEAUTH_LEAVING);
-+		SET_BIT(adev->set_mask, GETSET_RESCAN);
-+		acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_deauth_from_ap
-+*/
-+static void
-+acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req)
-+{
-+	FN_ENTER;
-+
-+	if (!adev->ap_client) {
-+		/* Hrm, we aren't assoc'ed yet anyhow... */
-+		goto end;
-+	}
-+
-+	printk("%s: got deauth frame with reason %d (%s)\n",
-+		adev->ndev->name, *req->reason,
-+		acx_wlan_reason_str(*req->reason));
-+
-+	/* Chk: is ta verified to be from our AP? */
-+	if (mac_is_equal(adev->dev_addr, req->hdr->a1)) {
-+		log(L_DEBUG, "AP sent us deauth packet\n");
-+		SET_BIT(adev->set_mask, GETSET_RESCAN);
-+		acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_rx
-+**
-+** The end of the Rx path. Pulls data from a rxhostdesc into a socket
-+** buffer and feeds it to the network stack via netif_rx().
-+*/
-+static void
-+acx_l_rx(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	FN_ENTER;
-+	if (likely(adev->dev_state_mask & ACX_STATE_IFACE_UP)) {
-+		struct sk_buff *skb;
-+		skb = acx_rxbuf_to_ether(adev, rxbuf);
-+		if (likely(skb)) {
-+			netif_rx(skb);
-+			adev->ndev->last_rx = jiffies;
-+			adev->stats.rx_packets++;
-+			adev->stats.rx_bytes += skb->len;
-+		}
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_data_frame_master
-+*/
-+static int
-+acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	struct wlan_hdr *hdr;
-+	struct tx *tx;
-+	void *txbuf;
-+	int len;
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	switch (WF_FC_FROMTODSi & hdr->fc) {
-+	case 0:
-+	case WF_FC_FROMDSi:
-+		log(L_DEBUG, "ap->sta or adhoc->adhoc data frame ignored\n");
-+		goto done;
-+	case WF_FC_TODSi:
-+		break;
-+	default: /* WF_FC_FROMTODSi */
-+		log(L_DEBUG, "wds data frame ignored (TODO)\n");
-+		goto done;
-+	}
-+
-+	/* check if it is our BSSID, if not, leave */
-+	if (!mac_is_equal(adev->bssid, hdr->a1)) {
-+		goto done;
-+	}
-+
-+	if (mac_is_equal(adev->dev_addr, hdr->a3)) {
-+		/* this one is for us */
-+		acx_l_rx(adev, rxbuf);
-+	} else {
-+		if (mac_is_bcast(hdr->a3)) {
-+			/* this one is bcast, rx it too */
-+			acx_l_rx(adev, rxbuf);
-+		}
-+		tx = acx_l_alloc_tx(adev);
-+		if (!tx) {
-+			goto fail;
-+		}
-+		/* repackage, tx, and hope it someday reaches its destination */
-+		/* order is important, we do it in-place */
-+		MAC_COPY(hdr->a1, hdr->a3);
-+		MAC_COPY(hdr->a3, hdr->a2);
-+		MAC_COPY(hdr->a2, adev->bssid);
-+		/* To_DS = 0, From_DS = 1 */
-+		hdr->fc = WF_FC_FROMDSi + WF_FTYPE_DATAi;
-+
-+		txbuf = acx_l_get_txbuf(adev, tx);
-+		if (txbuf) {
-+			len = RXBUF_BYTES_RCVD(adev, rxbuf);
-+			memcpy(txbuf, hdr, len);
-+			acx_l_tx_data(adev, tx, len);
-+		} else {
-+			acx_l_dealloc_tx(adev, tx);
-+		}
-+	}
-+done:
-+	result = OK;
-+fail:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_data_frame_client
-+*/
-+static int
-+acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	const u8 *da, *bssid;
-+	const wlan_hdr_t *hdr;
-+	struct net_device *ndev = adev->ndev;
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	if (ACX_STATUS_4_ASSOCIATED != adev->status)
-+		goto drop;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	switch (WF_FC_FROMTODSi & hdr->fc) {
-+	case 0:
-+		if (adev->mode != ACX_MODE_0_ADHOC) {
-+			log(L_DEBUG, "adhoc->adhoc data frame ignored\n");
-+			goto drop;
-+		}
-+		bssid = hdr->a3;
-+		break;
-+	case WF_FC_FROMDSi:
-+		if (adev->mode != ACX_MODE_2_STA) {
-+			log(L_DEBUG, "ap->sta data frame ignored\n");
-+			goto drop;
-+		}
-+		bssid = hdr->a2;
-+		break;
-+	case WF_FC_TODSi:
-+		log(L_DEBUG, "sta->ap data frame ignored\n");
-+		goto drop;
-+	default: /* WF_FC_FROMTODSi: wds->wds */
-+		log(L_DEBUG, "wds data frame ignored (todo)\n");
-+		goto drop;
-+	}
-+
-+	da = hdr->a1;
-+
-+	if (unlikely(acx_debug & L_DEBUG)) {
-+		acx_print_mac("rx: da=", da, "");
-+		acx_print_mac(" bssid=", bssid, "");
-+		acx_print_mac(" adev->bssid=", adev->bssid, "");
-+		acx_print_mac(" adev->addr=", adev->dev_addr, "\n");
-+	}
-+
-+	/* promiscuous mode --> receive all packets */
-+	if (unlikely(ndev->flags & IFF_PROMISC))
-+		goto process;
-+
-+	/* FIRST, check if it is our BSSID */
-+	if (!mac_is_equal(adev->bssid, bssid)) {
-+		/* is not our BSSID, so bail out */
-+		goto drop;
-+	}
-+
-+	/* then, check if it is our address */
-+	if (mac_is_equal(adev->dev_addr, da)) {
-+		goto process;
-+	}
-+
-+	/* then, check if it is broadcast */
-+	if (mac_is_bcast(da)) {
-+		goto process;
-+	}
-+
-+	if (mac_is_mcast(da)) {
-+		/* unconditionally receive all multicasts */
-+		if (ndev->flags & IFF_ALLMULTI)
-+			goto process;
-+
-+		/* FIXME: need to check against the list of
-+		 * multicast addresses that are configured
-+		 * for the interface (ifconfig) */
-+		log(L_XFER, "FIXME: multicast packet, need to check "
-+			"against a list of multicast addresses "
-+			"(to be created!); accepting packet for now\n");
-+		/* for now, just accept it here */
-+		goto process;
-+	}
-+
-+	log(L_DEBUG, "rx: foreign packet, dropping\n");
-+	goto drop;
-+process:
-+	/* receive packet */
-+	acx_l_rx(adev, rxbuf);
-+
-+	result = OK;
-+drop:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_mgmt_frame
-+**
-+** Theory of operation: mgmt packet gets parsed (to make it easy
-+** to access variable-sized IEs), results stored in 'parsed'.
-+** Then we react to the packet.
-+*/
-+typedef union parsed_mgmt_req {
-+	wlan_fr_mgmt_t mgmt;
-+	wlan_fr_assocreq_t assocreq;
-+	wlan_fr_reassocreq_t reassocreq;
-+	wlan_fr_assocresp_t assocresp;
-+	wlan_fr_reassocresp_t reassocresp;
-+	wlan_fr_beacon_t beacon;
-+	wlan_fr_disassoc_t disassoc;
-+	wlan_fr_authen_t authen;
-+	wlan_fr_deauthen_t deauthen;
-+	wlan_fr_proberesp_t proberesp;
-+} parsed_mgmt_req_t;
-+
-+void BUG_excessive_stack_usage(void);
-+
-+static int
-+acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	parsed_mgmt_req_t parsed;	/* takes ~100 bytes of stack */
-+	wlan_hdr_t *hdr;
-+	int adhoc, sta_scan, sta, ap;
-+	int len;
-+
-+	if (sizeof(parsed) > 256)
-+		BUG_excessive_stack_usage();
-+
-+	FN_ENTER;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	/* Management frames never have these set */
-+	if (WF_FC_FROMTODSi & hdr->fc) {
-+		FN_EXIT1(NOT_OK);
-+		return NOT_OK;
-+	}
-+
-+	len = RXBUF_BYTES_RCVD(adev, rxbuf);
-+	if (WF_FC_ISWEPi & hdr->fc)
-+		len -= 0x10;
-+
-+	adhoc = (adev->mode == ACX_MODE_0_ADHOC);
-+	sta_scan = ((adev->mode == ACX_MODE_2_STA)
-+		 && (adev->status != ACX_STATUS_4_ASSOCIATED));
-+	sta = ((adev->mode == ACX_MODE_2_STA)
-+	    && (adev->status == ACX_STATUS_4_ASSOCIATED));
-+	ap = (adev->mode == ACX_MODE_3_AP);
-+
-+	switch (WF_FC_FSTYPEi & hdr->fc) {
-+	/* beacons first, for speed */
-+	case WF_FSTYPE_BEACONi:
-+		memset(&parsed.beacon, 0, sizeof(parsed.beacon));
-+		parsed.beacon.hdr = hdr;
-+		parsed.beacon.len = len;
-+		if (acx_debug & L_DATA) {
-+			printk("beacon len:%d fc:%04X dur:%04X seq:%04X",
-+			       len, hdr->fc, hdr->dur, hdr->seq);
-+			acx_print_mac(" a1:", hdr->a1, "");
-+			acx_print_mac(" a2:", hdr->a2, "");
-+			acx_print_mac(" a3:", hdr->a3, "\n");
-+		}
-+		wlan_mgmt_decode_beacon(&parsed.beacon);
-+		/* beacon and probe response are very similar, so... */
-+		acx_l_process_probe_response(adev, &parsed.beacon, rxbuf);
-+		break;
-+	case WF_FSTYPE_ASSOCREQi:
-+		if (!ap)
-+			break;
-+		memset(&parsed.assocreq, 0, sizeof(parsed.assocreq));
-+		parsed.assocreq.hdr = hdr;
-+		parsed.assocreq.len = len;
-+		wlan_mgmt_decode_assocreq(&parsed.assocreq);
-+		if (mac_is_equal(hdr->a1, adev->bssid)
-+		 && mac_is_equal(hdr->a3, adev->bssid)) {
-+			acx_l_transmit_assocresp(adev, &parsed.assocreq);
-+		}
-+		break;
-+	case WF_FSTYPE_REASSOCREQi:
-+		if (!ap)
-+			break;
-+		memset(&parsed.assocreq, 0, sizeof(parsed.assocreq));
-+		parsed.assocreq.hdr = hdr;
-+		parsed.assocreq.len = len;
-+		wlan_mgmt_decode_assocreq(&parsed.assocreq);
-+		/* reassocreq and assocreq are equivalent */
-+		acx_l_transmit_reassocresp(adev, &parsed.reassocreq);
-+		break;
-+	case WF_FSTYPE_ASSOCRESPi:
-+		if (!sta_scan)
-+			break;
-+		memset(&parsed.assocresp, 0, sizeof(parsed.assocresp));
-+		parsed.assocresp.hdr = hdr;
-+		parsed.assocresp.len = len;
-+		wlan_mgmt_decode_assocresp(&parsed.assocresp);
-+		acx_l_process_assocresp(adev, &parsed.assocresp);
-+		break;
-+	case WF_FSTYPE_REASSOCRESPi:
-+		if (!sta_scan)
-+			break;
-+		memset(&parsed.assocresp, 0, sizeof(parsed.assocresp));
-+		parsed.assocresp.hdr = hdr;
-+		parsed.assocresp.len = len;
-+		wlan_mgmt_decode_assocresp(&parsed.assocresp);
-+		acx_l_process_reassocresp(adev, &parsed.reassocresp);
-+		break;
-+	case WF_FSTYPE_PROBEREQi:
-+		if (ap || adhoc) {
-+			/* FIXME: since we're supposed to be an AP,
-+			** we need to return a Probe Response packet.
-+			** Currently firmware is doing it for us,
-+			** but firmware is buggy! See comment elsewhere --vda */
-+		}
-+		break;
-+	case WF_FSTYPE_PROBERESPi:
-+		memset(&parsed.proberesp, 0, sizeof(parsed.proberesp));
-+		parsed.proberesp.hdr = hdr;
-+		parsed.proberesp.len = len;
-+		wlan_mgmt_decode_proberesp(&parsed.proberesp);
-+		acx_l_process_probe_response(adev, &parsed.proberesp, rxbuf);
-+		break;
-+	case 6:
-+	case 7:
-+		/* exit */
-+		break;
-+	case WF_FSTYPE_ATIMi:
-+		/* exit */
-+		break;
-+	case WF_FSTYPE_DISASSOCi:
-+		if (!sta && !ap)
-+			break;
-+		memset(&parsed.disassoc, 0, sizeof(parsed.disassoc));
-+		parsed.disassoc.hdr = hdr;
-+		parsed.disassoc.len = len;
-+		wlan_mgmt_decode_disassoc(&parsed.disassoc);
-+		if (sta)
-+			acx_l_process_disassoc_from_ap(adev, &parsed.disassoc);
-+		else
-+			acx_l_process_disassoc_from_sta(adev, &parsed.disassoc);
-+		break;
-+	case WF_FSTYPE_AUTHENi:
-+		if (!sta_scan && !ap)
-+			break;
-+		memset(&parsed.authen, 0, sizeof(parsed.authen));
-+		parsed.authen.hdr = hdr;
-+		parsed.authen.len = len;
-+		wlan_mgmt_decode_authen(&parsed.authen);
-+		acx_l_process_authen(adev, &parsed.authen);
-+		break;
-+	case WF_FSTYPE_DEAUTHENi:
-+		if (!sta && !ap)
-+			break;
-+		memset(&parsed.deauthen, 0, sizeof(parsed.deauthen));
-+		parsed.deauthen.hdr = hdr;
-+		parsed.deauthen.len = len;
-+		wlan_mgmt_decode_deauthen(&parsed.deauthen);
-+		if (sta)
-+			acx_l_process_deauth_from_ap(adev, &parsed.deauthen);
-+		else
-+			acx_l_process_deauth_from_sta(adev, &parsed.deauthen);
-+		break;
-+	}
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+#ifdef UNUSED
-+/***********************************************************************
-+** acx_process_class_frame
-+**
-+** Called from IRQ context only
-+*/
-+static int
-+acx_process_class_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala)
-+{
-+	return OK;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_l_process_NULL_frame
-+*/
-+#ifdef BOGUS_ITS_NOT_A_NULL_FRAME_HANDLER_AT_ALL
-+static int
-+acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala)
-+{
-+	const signed char *esi;
-+	const u8 *ebx;
-+	const wlan_hdr_t *hdr;
-+	const client_t *client;
-+	int result = NOT_OK;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	switch (WF_FC_FROMTODSi & hdr->fc) {
-+	case 0:
-+		esi = hdr->a1;
-+		ebx = hdr->a2;
-+		break;
-+	case WF_FC_FROMDSi:
-+		esi = hdr->a1;
-+		ebx = hdr->a3;
-+		break;
-+	case WF_FC_TODSi:
-+		esi = hdr->a1;
-+		ebx = hdr->a2;
-+		break;
-+	default: /* WF_FC_FROMTODSi */
-+		esi = hdr->a1; /* added by me! --vda */
-+		ebx = hdr->a2;
-+	}
-+
-+	if (esi[0x0] < 0) {
-+		result = OK;
-+		goto done;
-+	}
-+
-+	client = acx_l_sta_list_get(adev, ebx);
-+	if (client)
-+		result = NOT_OK;
-+	else {
-+#ifdef IS_IT_BROKEN
-+		log(L_DEBUG|L_XFER, "<transmit_deauth 7>\n");
-+		acx_l_transmit_deauthen(adev, ebx,
-+			WLAN_MGMT_REASON_CLASS2_NONAUTH);
-+#else
-+		log(L_DEBUG, "received NULL frame from unknown client! "
-+			"We really shouldn't send deauthen here, right?\n");
-+#endif
-+		result = OK;
-+	}
-+done:
-+	return result;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_l_process_probe_response
-+*/
-+static int
-+acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req,
-+			const rxbuffer_t *rxbuf)
-+{
-+	struct client *bss;
-+	wlan_hdr_t *hdr;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if (mac_is_equal(hdr->a3, adev->dev_addr)) {
-+		log(L_ASSOC, "huh, scan found our own MAC!?\n");
-+		goto ok; /* just skip this one silently */
-+	}
-+
-+	bss = acx_l_sta_list_get_or_add(adev, hdr->a2);
-+
-+	/* NB: be careful modifying bss data! It may be one
-+	** of the already known clients (like our AP if we are a STA)
-+	** Thus do not blindly modify e.g. current ratemask! */
-+
-+	if (STA_LIST_ADD_CAN_FAIL && !bss) {
-+		/* uh oh, we found more sites/stations than we can handle with
-+		 * our current setup: pull the emergency brake and stop scanning! */
-+		acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_STOP_SCAN);
-+		/* TODO: a nice comment what below call achieves --vda */
-+		acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH);
-+		goto ok;
-+	}
-+	/* NB: get_or_add already filled bss->address = hdr->a2 */
-+	MAC_COPY(bss->bssid, hdr->a3);
-+
-+	/* copy the ESSID element */
-+	if (req->ssid && req->ssid->len <= IW_ESSID_MAX_SIZE) {
-+		bss->essid_len = req->ssid->len;
-+		memcpy(bss->essid, req->ssid->ssid, req->ssid->len);
-+		bss->essid[req->ssid->len] = '\0';
-+	} else {
-+		/* Either no ESSID IE or oversized one */
-+		printk("%s: received packet has bogus ESSID\n",
-+						    adev->ndev->name);
-+	}
-+
-+	if (req->ds_parms)
-+		bss->channel = req->ds_parms->curr_ch;
-+	if (req->cap_info)
-+		bss->cap_info = ieee2host16(*req->cap_info);
-+
-+	bss->sir = acx_signal_to_winlevel(rxbuf->phy_level);
-+	bss->snr = acx_signal_to_winlevel(rxbuf->phy_snr);
-+
-+	bss->rate_cap = 0;	/* operational mask */
-+	bss->rate_bas = 0;	/* basic mask */
-+	if (req->supp_rates)
-+		add_bits_to_ratemasks(req->supp_rates->rates,
-+			req->supp_rates->len, &bss->rate_bas, &bss->rate_cap);
-+	if (req->ext_rates)
-+		add_bits_to_ratemasks(req->ext_rates->rates,
-+			req->ext_rates->len, &bss->rate_bas, &bss->rate_cap);
-+	/* Fix up any possible bogosity - code elsewhere
-+	 * is not expecting empty masks */
-+	if (!bss->rate_cap)
-+		bss->rate_cap = adev->rate_basic;
-+	if (!bss->rate_bas)
-+		bss->rate_bas = 1 << lowest_bit(bss->rate_cap);
-+	if (!bss->rate_cur)
-+		bss->rate_cur = 1 << lowest_bit(bss->rate_bas);
-+
-+	/* People moan about this being too noisy at L_ASSOC */
-+	log(L_DEBUG,
-+		"found %s: ESSID=\"%s\" ch=%d "
-+		"BSSID="MACSTR" caps=0x%04X SIR=%d SNR=%d\n",
-+		(bss->cap_info & WF_MGMT_CAP_IBSS) ? "Ad-Hoc peer" : "AP",
-+		bss->essid, bss->channel, MAC(bss->bssid), bss->cap_info,
-+		bss->sir, bss->snr);
-+ok:
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_assocresp
-+*/
-+static int
-+acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req)
-+{
-+	const wlan_hdr_t *hdr;
-+	int res = OK;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if ((ACX_MODE_2_STA == adev->mode)
-+	 && mac_is_equal(adev->dev_addr, hdr->a1)) {
-+		u16 st = ieee2host16(*(req->status));
-+		if (WLAN_MGMT_STATUS_SUCCESS == st) {
-+			adev->aid = ieee2host16(*(req->aid));
-+			/* tell the card we are associated when
-+			** we are out of interrupt context */
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_ASSOCIATE);
-+		} else {
-+
-+			/* TODO: we shall delete peer from sta_list, and try
-+			** other candidates... */
-+
-+			printk("%s: association FAILED: peer sent "
-+				"Status Code %d (%s)\n",
-+				adev->ndev->name, st, get_status_string(st));
-+			res = NOT_OK;
-+		}
-+	}
-+
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_reassocresp
-+*/
-+static int
-+acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req)
-+{
-+	const wlan_hdr_t *hdr;
-+	int result = NOT_OK;
-+	u16 st;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if (!mac_is_equal(adev->dev_addr, hdr->a1)) {
-+		goto end;
-+	}
-+	st = ieee2host16(*(req->status));
-+	if (st == WLAN_MGMT_STATUS_SUCCESS) {
-+		acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+		result = OK;
-+	} else {
-+		printk("%s: reassociation FAILED: peer sent "
-+			"response code %d (%s)\n",
-+			adev->ndev->name, st, get_status_string(st));
-+	}
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_authen
-+**
-+** Called only in STA_SCAN or AP mode
-+*/
-+static int
-+acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req)
-+{
-+	const wlan_hdr_t *hdr;
-+	client_t *clt;
-+	wlan_ie_challenge_t *chal;
-+	u16 alg, seq, status;
-+	int ap, result;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if (acx_debug & L_ASSOC) {
-+		acx_print_mac("AUTHEN adev->addr=", adev->dev_addr, " ");
-+		acx_print_mac("a1=", hdr->a1, " ");
-+		acx_print_mac("a2=", hdr->a2, " ");
-+		acx_print_mac("a3=", hdr->a3, " ");
-+		acx_print_mac("adev->bssid=", adev->bssid, "\n");
-+	}
-+
-+	if (!mac_is_equal(adev->dev_addr, hdr->a1)
-+	 || !mac_is_equal(adev->bssid, hdr->a3)) {
-+		result = OK;
-+		goto end;
-+	}
-+
-+	alg = ieee2host16(*(req->auth_alg));
-+	seq = ieee2host16(*(req->auth_seq));
-+	status = ieee2host16(*(req->status));
-+
-+	log(L_ASSOC, "auth algorithm %d, auth sequence %d, status %d\n", alg, seq, status);
-+
-+	ap = (adev->mode == ACX_MODE_3_AP);
-+
-+	if (adev->auth_alg <= 1) {
-+		if (adev->auth_alg != alg) {
-+			log(L_ASSOC, "auth algorithm mismatch: "
-+				"our:%d peer:%d\n", adev->auth_alg, alg);
-+			result = NOT_OK;
-+			goto end;
-+		}
-+	}
-+	if (ap) {
-+		clt = acx_l_sta_list_get_or_add(adev, hdr->a2);
-+		if (STA_LIST_ADD_CAN_FAIL && !clt) {
-+			log(L_ASSOC, "could not allocate room for client\n");
-+			result = NOT_OK;
-+			goto end;
-+		}
-+	} else {
-+		clt = adev->ap_client;
-+		if (!mac_is_equal(clt->address, hdr->a2)) {
-+			printk("%s: malformed auth frame from AP?!\n",
-+					adev->ndev->name);
-+			result = NOT_OK;
-+			goto end;
-+		}
-+	}
-+
-+	/* now check which step in the authentication sequence we are
-+	 * currently in, and act accordingly */
-+	switch (seq) {
-+	case 1:
-+		if (!ap)
-+			break;
-+		acx_l_transmit_authen2(adev, req, clt);
-+		break;
-+	case 2:
-+		if (ap)
-+			break;
-+		if (status == WLAN_MGMT_STATUS_SUCCESS) {
-+			if (alg == WLAN_AUTH_ALG_OPENSYSTEM) {
-+				acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED);
-+				acx_l_transmit_assoc_req(adev);
-+			} else
-+			if (alg == WLAN_AUTH_ALG_SHAREDKEY) {
-+				acx_l_transmit_authen3(adev, req);
-+			}
-+		} else {
-+			printk("%s: auth FAILED: peer sent "
-+				"response code %d (%s), "
-+				"still waiting for authentication\n",
-+				adev->ndev->name,
-+				status,	get_status_string(status));
-+			acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH);
-+		}
-+		break;
-+	case 3:
-+		if (!ap)
-+			break;
-+		if ((clt->auth_alg != WLAN_AUTH_ALG_SHAREDKEY)
-+		 || (alg != WLAN_AUTH_ALG_SHAREDKEY)
-+		 || (clt->auth_step != 2))
-+			break;
-+		chal = req->challenge;
-+		if (!chal
-+		 || memcmp(chal->challenge, clt->challenge_text, WLAN_CHALLENGE_LEN)
-+		 || (chal->eid != WLAN_EID_CHALLENGE)
-+		 || (chal->len != WLAN_CHALLENGE_LEN)
-+		)
-+			break;
-+		acx_l_transmit_authen4(adev, req);
-+		MAC_COPY(clt->address, hdr->a2);
-+		clt->used = CLIENT_AUTHENTICATED_2;
-+		clt->auth_step = 4;
-+		clt->seq = ieee2host16(hdr->seq);
-+		break;
-+	case 4:
-+		if (ap)
-+			break;
-+		/* ok, we're through: we're authenticated. Woohoo!! */
-+		acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED);
-+		log(L_ASSOC, "Authenticated!\n");
-+		/* now that we're authenticated, request association */
-+		acx_l_transmit_assoc_req(adev);
-+		break;
-+	}
-+	result = OK;
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_gen_challenge
-+*/
-+static inline void
-+acx_gen_challenge(wlan_ie_challenge_t* d)
-+{
-+	FN_ENTER;
-+	d->eid = WLAN_EID_CHALLENGE;
-+	d->len = WLAN_CHALLENGE_LEN;
-+	get_random_bytes(d->challenge, WLAN_CHALLENGE_LEN);
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_deauthen
-+*/
-+static int
-+acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct deauthen_frame_body *body;
-+
-+	FN_ENTER;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = (WF_FTYPE_MGMTi | WF_FSTYPE_DEAUTHENi);
-+	head->dur = 0;
-+	MAC_COPY(head->da, addr);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, adev->bssid);
-+	head->seq = 0;
-+
-+	log(L_DEBUG|L_ASSOC|L_XFER,
-+		"sending deauthen to "MACSTR" for %d\n",
-+		MAC(addr), reason);
-+
-+	body->reason = host2ieee16(reason);
-+
-+	/* body is fixed size here, but beware of cutting-and-pasting this -
-+	** do not use sizeof(*body) for variable sized mgmt packets! */
-+	acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body));
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_authen1
-+*/
-+static int
-+acx_l_transmit_authen1(acx_device_t *adev)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct auth_frame_body *body;
-+
-+	FN_ENTER;
-+
-+	log(L_ASSOC, "sending authentication1 request (auth algo %d), "
-+		"awaiting response\n", adev->auth_alg);
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_AUTHENi;
-+	/* duration should be 0 instead of 0x8000 to have
-+	 * the firmware calculate the value, right? */
-+	head->dur = 0;
-+	MAC_COPY(head->da, adev->bssid);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, adev->bssid);
-+	head->seq = 0;
-+
-+	body->auth_alg = host2ieee16(adev->auth_alg);
-+	body->auth_seq = host2ieee16(1);
-+	body->status = host2ieee16(0);
-+
-+	acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_authen2
-+*/
-+static int
-+acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req,
-+		      client_t *clt)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct auth_frame_body *body;
-+	unsigned int packet_len;
-+
-+	FN_ENTER;
-+
-+	if (!clt)
-+		goto ok;
-+
-+	MAC_COPY(clt->address, req->hdr->a2);
-+#ifdef UNUSED
-+	clt->ps = ((WF_FC_PWRMGTi & req->hdr->fc) != 0);
-+#endif
-+	clt->auth_alg = ieee2host16(*(req->auth_alg));
-+	clt->auth_step = 2;
-+	clt->seq = ieee2host16(req->hdr->seq);
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_AUTHENi;
-+	head->dur = 0 /* req->hdr->dur */;
-+	MAC_COPY(head->da, req->hdr->a2);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, req->hdr->a3);
-+	head->seq = 0 /* req->hdr->seq */;
-+
-+	/* already in IEEE format, no endianness conversion */
-+	body->auth_alg = *(req->auth_alg);
-+	body->auth_seq = host2ieee16(2);
-+	body->status = host2ieee16(0);
-+
-+	packet_len = WLAN_HDR_A3_LEN + 2 + 2 + 2;
-+	if (ieee2host16(*(req->auth_alg)) == WLAN_AUTH_ALG_OPENSYSTEM) {
-+		clt->used = CLIENT_AUTHENTICATED_2;
-+	} else {	/* shared key */
-+		acx_gen_challenge(&body->challenge);
-+		memcpy(&clt->challenge_text, body->challenge.challenge, WLAN_CHALLENGE_LEN);
-+		packet_len += 2 + 2 + 2 + 1+1+WLAN_CHALLENGE_LEN;
-+	}
-+
-+	acxlog_mac(L_ASSOC|L_XFER,
-+		"transmit_auth2: BSSID=", head->bssid, "\n");
-+
-+	acx_l_tx_data(adev, tx, packet_len);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_authen3
-+*/
-+static int
-+acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct auth_frame_body *body;
-+	unsigned int packet_len;
-+
-+	FN_ENTER;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto ok;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto ok;
-+	}
-+	body = (void*)(head + 1);
-+
-+	/* add WF_FC_ISWEPi: auth step 3 needs to be encrypted */
-+	head->fc = WF_FC_ISWEPi + WF_FSTYPE_AUTHENi;
-+	/* FIXME: is this needed?? authen4 does it...
-+	 * I think it's even wrong since we shouldn't re-use old
-+	 * values but instead let the firmware calculate proper ones
-+	head->dur = req->hdr->dur;
-+	head->seq = req->hdr->seq;
-+	*/
-+	MAC_COPY(head->da, adev->bssid);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, adev->bssid);
-+
-+	/* already in IEEE format, no endianness conversion */
-+	body->auth_alg = *(req->auth_alg);
-+	body->auth_seq = host2ieee16(3);
-+	body->status = host2ieee16(0);
-+	memcpy(&body->challenge, req->challenge, req->challenge->len + 2);
-+	packet_len = WLAN_HDR_A3_LEN + 8 + req->challenge->len;
-+
-+	log(L_ASSOC|L_XFER, "transmit_authen3!\n");
-+
-+	acx_l_tx_data(adev, tx, packet_len);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_authen4
-+*/
-+static int
-+acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct auth_frame_body *body;
-+
-+	FN_ENTER;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto ok;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto ok;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_AUTHENi; /* 0xb0 */
-+	head->dur = 0 /* req->hdr->dur */;
-+	MAC_COPY(head->da, req->hdr->a2);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, req->hdr->a3);
-+	head->seq = 0 /* req->hdr->seq  */;
-+
-+	/* already in IEEE format, no endianness conversion */
-+	body->auth_alg = *(req->auth_alg);
-+	body->auth_seq = host2ieee16(4);
-+	body->status = host2ieee16(0);
-+
-+	acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_assoc_req
-+**
-+** adev->ap_client is a current candidate AP here
-+*/
-+static int
-+acx_l_transmit_assoc_req(acx_device_t *adev)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	u8 *body, *p, *prate;
-+	unsigned int packet_len;
-+	u16 cap;
-+
-+	FN_ENTER;
-+
-+	log(L_ASSOC, "sending association request, "
-+			"awaiting response. NOT ASSOCIATED YET\n");
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_ASSOCREQi;
-+	head->dur = host2ieee16(0x8000);
-+	MAC_COPY(head->da, adev->bssid);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, adev->bssid);
-+	head->seq = 0;
-+
-+	p = body;
-+	/* now start filling the AssocReq frame body */
-+
-+	/* since this assoc request will most likely only get
-+	 * sent in the STA to AP case (and not when Ad-Hoc IBSS),
-+	 * the cap combination indicated here will thus be
-+	 * WF_MGMT_CAP_ESSi *always* (no IBSS ever)
-+	 * The specs are more than non-obvious on all that:
-+	 *
-+	 * 802.11 7.3.1.4 Capability Information field
-+	** APs set the ESS subfield to 1 and the IBSS subfield to 0 within
-+	** Beacon or Probe Response management frames. STAs within an IBSS
-+	** set the ESS subfield to 0 and the IBSS subfield to 1 in transmitted
-+	** Beacon or Probe Response management frames
-+	**
-+	** APs set the Privacy subfield to 1 within transmitted Beacon,
-+	** Probe Response, Association Response, and Reassociation Response
-+	** if WEP is required for all data type frames within the BSS.
-+	** STAs within an IBSS set the Privacy subfield to 1 in Beacon
-+	** or Probe Response management frames if WEP is required
-+	** for all data type frames within the IBSS */
-+
-+	/* note that returning 0 will be refused by several APs...
-+	 * (so this indicates that you're probably supposed to
-+	 * "confirm" the ESS mode) */
-+	cap = WF_MGMT_CAP_ESSi;
-+
-+	/* this one used to be a check on wep_restricted,
-+	 * but more likely it's wep_enabled instead */
-+	if (adev->wep_enabled)
-+		SET_BIT(cap, WF_MGMT_CAP_PRIVACYi);
-+
-+	/* Probably we can just set these always, because our hw is
-+	** capable of shortpre and PBCC --vda */
-+	/* only ask for short preamble if the peer station supports it */
-+	if (adev->ap_client->cap_info & WF_MGMT_CAP_SHORT)
-+		SET_BIT(cap, WF_MGMT_CAP_SHORTi);
-+	/* only ask for PBCC support if the peer station supports it */
-+	if (adev->ap_client->cap_info & WF_MGMT_CAP_PBCC)
-+		SET_BIT(cap, WF_MGMT_CAP_PBCCi);
-+
-+	/* IEs: 1. caps */
-+	*(u16*)p = cap;	p += 2;
-+	/* 2. listen interval */
-+	*(u16*)p = host2ieee16(adev->listen_interval); p += 2;
-+	/* 3. ESSID */
-+	p = wlan_fill_ie_ssid(p,
-+			strlen(adev->essid_for_assoc), adev->essid_for_assoc);
-+	/* 4. supp rates */
-+	prate = p;
-+	p = wlan_fill_ie_rates(p,
-+			adev->rate_supported_len, adev->rate_supported);
-+	/* 5. ext supp rates */
-+	p = wlan_fill_ie_rates_ext(p,
-+			adev->rate_supported_len, adev->rate_supported);
-+
-+	if (acx_debug & L_DEBUG) {
-+		printk("association: rates element\n");
-+		acx_dump_bytes(prate, p - prate);
-+	}
-+
-+	/* calculate lengths */
-+	packet_len = WLAN_HDR_A3_LEN + (p - body);
-+
-+	log(L_ASSOC, "association: requesting caps 0x%04X, ESSID \"%s\"\n",
-+		cap, adev->essid_for_assoc);
-+
-+	acx_l_tx_data(adev, tx, packet_len);
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_disassoc
-+**
-+** FIXME: looks like incomplete implementation of a helper:
-+** acx_l_transmit_disassoc(adev, clt) - kick this client (we're an AP)
-+** acx_l_transmit_disassoc(adev, NULL) - leave BSSID (we're a STA)
-+*/
-+#ifdef BROKEN
-+int
-+acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct disassoc_frame_body *body;
-+
-+	FN_ENTER;
-+/*	if (clt != NULL) { */
-+		tx = acx_l_alloc_tx(adev);
-+		if (!tx)
-+			goto bad;
-+		head = acx_l_get_txbuf(adev, tx);
-+		if (!head) {
-+			acx_l_dealloc_tx(adev, tx);
-+			goto bad;
-+		}
-+		body = (void*)(head + 1);
-+
-+/*		clt->used = CLIENT_AUTHENTICATED_2; - not (yet?) associated */
-+
-+		head->fc = WF_FSTYPE_DISASSOCi;
-+		head->dur = 0;
-+		/* huh? It muchly depends on whether we're STA or AP...
-+		** sta->ap: da=bssid, sa=own, bssid=bssid
-+		** ap->sta: da=sta, sa=bssid, bssid=bssid. FIXME! */
-+		MAC_COPY(head->da, adev->bssid);
-+		MAC_COPY(head->sa, adev->dev_addr);
-+		MAC_COPY(head->bssid, adev->dev_addr);
-+		head->seq = 0;
-+
-+		/* "Class 3 frame received from nonassociated station." */
-+		body->reason = host2ieee16(7);
-+
-+		/* fixed size struct, ok to sizeof */
-+		acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body));
-+/*	} */
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_s_complete_scan
-+**
-+** Called either from after_interrupt_task() if:
-+** 1) there was Scan_Complete IRQ, or
-+** 2) scanning expired in timer()
-+** We need to decide which ESS or IBSS to join.
-+** Iterates thru adev->sta_list:
-+**	if adev->ap is not bcast, will join only specified
-+**	ESS or IBSS with this bssid
-+**	checks peers' caps for ESS/IBSS bit
-+**	checks peers' SSID, allows exact match or hidden SSID
-+** If station to join is chosen:
-+**	points adev->ap_client to the chosen struct client
-+**	sets adev->essid_for_assoc for future assoc attempt
-+** Auth/assoc is not yet performed
-+** Returns OK if there is no need to restart scan
-+*/
-+int
-+acx_s_complete_scan(acx_device_t *adev)
-+{
-+	struct client *bss;
-+	unsigned long flags;
-+	u16 needed_cap;
-+	int i;
-+	int idx_found = -1;
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+		needed_cap = WF_MGMT_CAP_IBSS; /* 2, we require Ad-Hoc */
-+		break;
-+	case ACX_MODE_2_STA:
-+		needed_cap = WF_MGMT_CAP_ESS; /* 1, we require Managed */
-+		break;
-+	default:
-+		printk("acx: driver bug: mode=%d in complete_scan()\n", adev->mode);
-+		dump_stack();
-+		goto end;
-+	}
-+
-+	acx_lock(adev, flags);
-+
-+	/* TODO: sta_iterator hiding implementation would be nice here... */
-+
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		bss = &adev->sta_list[i];
-+		if (!bss->used) continue;
-+
-+
-+		log(L_ASSOC, "scan table: SSID=\"%s\" CH=%d SIR=%d SNR=%d\n",
-+			bss->essid, bss->channel, bss->sir, bss->snr);
-+
-+		if (!mac_is_bcast(adev->ap))
-+			if (!mac_is_equal(bss->bssid, adev->ap))
-+				continue; /* keep looking */
-+
-+		/* broken peer with no mode flags set? */
-+		if (unlikely(!(bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)))) {
-+			printk("%s: strange peer "MACSTR" found with "
-+				"neither ESS (AP) nor IBSS (Ad-Hoc) "
-+				"capability - skipped\n",
-+				adev->ndev->name, MAC(bss->address));
-+			continue;
-+		}
-+		log(L_ASSOC, "peer_cap 0x%04X, needed_cap 0x%04X\n",
-+		       bss->cap_info, needed_cap);
-+
-+		/* does peer station support what we need? */
-+		if ((bss->cap_info & needed_cap) != needed_cap)
-+			continue; /* keep looking */
-+
-+		/* strange peer with NO basic rates?! */
-+		if (unlikely(!bss->rate_bas)) {
-+			printk("%s: strange peer "MACSTR" with empty rate set "
-+				"- skipped\n",
-+				adev->ndev->name, MAC(bss->address));
-+			continue;
-+		}
-+
-+		/* do we support all basic rates of this peer? */
-+		if ((bss->rate_bas & adev->rate_oper) != bss->rate_bas)	{
-+/* we probably need to have all rates as operational rates,
-+   even in case of an 11M-only configuration */
-+#ifdef THIS_IS_TROUBLESOME
-+			printk("%s: peer "MACSTR": incompatible basic rates "
-+				"(AP requests 0x%04X, we have 0x%04X) "
-+				"- skipped\n",
-+				adev->ndev->name, MAC(bss->address),
-+				bss->rate_bas, adev->rate_oper);
-+			continue;
-+#else
-+			printk("%s: peer "MACSTR": incompatible basic rates "
-+				"(AP requests 0x%04X, we have 0x%04X). "
-+				"Considering anyway...\n",
-+				adev->ndev->name, MAC(bss->address),
-+				bss->rate_bas, adev->rate_oper);
-+#endif
-+		}
-+
-+		if ( !(adev->reg_dom_chanmask & (1<<(bss->channel-1))) ) {
-+			printk("%s: warning: peer "MACSTR" is on channel %d "
-+				"outside of channel range of current "
-+				"regulatory domain - couldn't join "
-+				"even if other settings match. "
-+				"You might want to adapt your config\n",
-+				adev->ndev->name, MAC(bss->address),
-+				bss->channel);
-+			continue; /* keep looking */
-+		}
-+
-+		if (!adev->essid_active || !strcmp(bss->essid, adev->essid)) {
-+			log(L_ASSOC,
-+			       "found station with matching ESSID! ('%s' "
-+			       "station, '%s' config)\n",
-+			       bss->essid,
-+			       (adev->essid_active) ? adev->essid : "[any]");
-+			/* TODO: continue looking for peer with better SNR */
-+			bss->used = CLIENT_JOIN_CANDIDATE;
-+			idx_found = i;
-+
-+			/* stop searching if this station is
-+			 * on the current channel, otherwise
-+			 * keep looking for an even better match */
-+			if (bss->channel == adev->channel)
-+				break;
-+		} else
-+		if (is_hidden_essid(bss->essid)) {
-+			/* hmm, station with empty or single-space SSID:
-+			 * using hidden SSID broadcast?
-+			 */
-+			/* This behaviour is broken: which AP from zillion
-+			** of APs with hidden SSID you'd try?
-+			** We should use Probe requests to get Probe responses
-+			** and check for real SSID (are those never hidden?) */
-+			bss->used = CLIENT_JOIN_CANDIDATE;
-+			if (idx_found == -1)
-+				idx_found = i;
-+			log(L_ASSOC, "found station with empty or "
-+				"single-space (hidden) SSID, considering "
-+				"for assoc attempt\n");
-+			/* ...and keep looking for better matches */
-+		} else {
-+			log(L_ASSOC, "ESSID doesn't match! ('%s' "
-+				"station, '%s' config)\n",
-+				bss->essid,
-+				(adev->essid_active) ? adev->essid : "[any]");
-+		}
-+	}
-+
-+	/* TODO: iterate thru join candidates instead */
-+	/* TODO: rescan if not associated within some timeout */
-+	if (idx_found != -1) {
-+		char *essid_src;
-+		size_t essid_len;
-+
-+		bss = &adev->sta_list[idx_found];
-+		adev->ap_client = bss;
-+
-+		if (is_hidden_essid(bss->essid)) {
-+			/* if the ESSID of the station we found is empty
-+			 * (no broadcast), then use user-configured ESSID
-+			 * instead */
-+			essid_src = adev->essid;
-+			essid_len = adev->essid_len;
-+		} else {
-+			essid_src = bss->essid;
-+			essid_len = strlen(bss->essid);
-+		}
-+
-+		acx_update_capabilities(adev);
-+
-+		memcpy(adev->essid_for_assoc, essid_src, essid_len);
-+		adev->essid_for_assoc[essid_len] = '\0';
-+		adev->channel = bss->channel;
-+		MAC_COPY(adev->bssid, bss->bssid);
-+
-+		bss->rate_cfg = (bss->rate_cap & adev->rate_oper);
-+		bss->rate_cur = 1 << lowest_bit(bss->rate_cfg);
-+		bss->rate_100 = acx_rate111to100(bss->rate_cur);
-+
-+		acxlog_mac(L_ASSOC,
-+			"matching station found: ", adev->bssid, ", joining\n");
-+
-+		/* TODO: do we need to switch to the peer's channel first? */
-+
-+		if (ACX_MODE_0_ADHOC == adev->mode) {
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+		} else {
-+			acx_l_transmit_authen1(adev);
-+			acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH);
-+		}
-+	} else { /* idx_found == -1 */
-+		/* uh oh, no station found in range */
-+		if (ACX_MODE_0_ADHOC == adev->mode) {
-+			printk("%s: no matching station found in range, "
-+				"generating our own IBSS instead\n",
-+				adev->ndev->name);
-+			/* we do it the HostAP way: */
-+			MAC_COPY(adev->bssid, adev->dev_addr);
-+			adev->bssid[0] |= 0x02; /* 'local assigned addr' bit */
-+			/* add IBSS bit to our caps... */
-+			acx_update_capabilities(adev);
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+			/* In order to cmd_join be called below */
-+			idx_found = 0;
-+		} else {
-+			/* we shall scan again, AP can be
-+			** just temporarily powered off */
-+			log(L_ASSOC,
-+				"no matching station found in range yet\n");
-+			acx_set_status(adev, ACX_STATUS_1_SCANNING);
-+			result = NOT_OK;
-+		}
-+	}
-+
-+	acx_unlock(adev, flags);
-+
-+	if (idx_found != -1) {
-+		if (ACX_MODE_0_ADHOC == adev->mode) {
-+			/* need to update channel in beacon template */
-+			SET_BIT(adev->set_mask, SET_TEMPLATES);
-+			if (ACX_STATE_IFACE_UP & adev->dev_state_mask)
-+				acx_s_update_card_settings(adev);
-+		}
-+		/* Inform firmware on our decision to start or join BSS */
-+		acx_s_cmd_join_bssid(adev, adev->bssid);
-+	}
-+
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_read_fw
-+**
-+** Loads a firmware image
-+**
-+** Returns:
-+**  0				unable to load file
-+**  pointer to firmware		success
-+*/
-+firmware_image_t*
-+acx_s_read_fw(struct device *dev, const char *file, u32 *size)
-+{
-+	firmware_image_t *res;
-+	const struct firmware *fw_entry;
-+
-+	res = NULL;
-+	log(L_INIT, "requesting firmware image '%s'\n", file);
-+	if (!request_firmware(&fw_entry, file, dev)) {
-+		*size = 8;
-+		if (fw_entry->size >= 8)
-+			*size = 8 + le32_to_cpu(*(u32 *)(fw_entry->data + 4));
-+		if (fw_entry->size != *size) {
-+			printk("acx: firmware size does not match "
-+				"firmware header: %d != %d, "
-+				"aborting fw upload\n",
-+				(int) fw_entry->size, (int) *size);
-+			goto release_ret;
-+		}
-+		res = vmalloc(*size);
-+		if (!res) {
-+			printk("acx: no memory for firmware "
-+				"(%u bytes)\n", *size);
-+			goto release_ret;
-+		}
-+		memcpy(res, fw_entry->data, fw_entry->size);
-+release_ret:
-+		release_firmware(fw_entry);
-+		return res;
-+	}
-+	printk("acx: firmware image '%s' was not provided. "
-+		"Check your hotplug scripts\n", file);
-+
-+	/* checksum will be verified in write_fw, so don't bother here */
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_set_wepkey
-+*/
-+static void
-+acx100_s_set_wepkey(acx_device_t *adev)
-+{
-+	ie_dot11WEPDefaultKey_t dk;
-+	int i;
-+
-+	for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) {
-+		if (adev->wep_keys[i].size != 0) {
-+			log(L_INIT, "setting WEP key: %d with "
-+				"total size: %d\n", i, (int) adev->wep_keys[i].size);
-+			dk.action = 1;
-+			dk.keySize = adev->wep_keys[i].size;
-+			dk.defaultKeyNum = i;
-+			memcpy(dk.key, adev->wep_keys[i].key, dk.keySize);
-+			acx_s_configure(adev, &dk, ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE);
-+		}
-+	}
-+}
-+
-+static void
-+acx111_s_set_wepkey(acx_device_t *adev)
-+{
-+	acx111WEPDefaultKey_t dk;
-+	int i;
-+
-+	for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) {
-+		if (adev->wep_keys[i].size != 0) {
-+			log(L_INIT, "setting WEP key: %d with "
-+				"total size: %d\n", i, (int) adev->wep_keys[i].size);
-+			memset(&dk, 0, sizeof(dk));
-+			dk.action = cpu_to_le16(1); /* "add key"; yes, that's a 16bit value */
-+			dk.keySize = adev->wep_keys[i].size;
-+
-+			/* are these two lines necessary? */
-+			dk.type = 0;              /* default WEP key */
-+			dk.index = 0;             /* ignored when setting default key */
-+
-+			dk.defaultKeyNum = i;
-+			memcpy(dk.key, adev->wep_keys[i].key, dk.keySize);
-+			acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &dk, sizeof(dk));
-+		}
-+	}
-+}
-+
-+static void
-+acx_s_set_wepkey(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev))
-+		acx111_s_set_wepkey(adev);
-+	else
-+		acx100_s_set_wepkey(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acx100_s_init_wep
-+**
-+** FIXME: this should probably be moved into the new card settings
-+** management, but since we're also modifying the memory map layout here
-+** due to the WEP key space we want, we should take care...
-+*/
-+static int
-+acx100_s_init_wep(acx_device_t *adev)
-+{
-+	acx100_ie_wep_options_t options;
-+	ie_dot11WEPDefaultKeyID_t dk;
-+	acx_ie_memmap_t pt;
-+	int res = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	log(L_DEBUG, "CodeEnd:%X\n", pt.CodeEnd);
-+
-+	pt.WEPCacheStart = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4);
-+	pt.WEPCacheEnd   = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4);
-+
-+	if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	/* let's choose maximum setting: 4 default keys, plus 10 other keys: */
-+	options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10);
-+	options.WEPOption = 0x00;
-+
-+	log(L_ASSOC, "%s: writing WEP options\n", __func__);
-+	acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS);
-+
-+	acx100_s_set_wepkey(adev);
-+
-+	if (adev->wep_keys[adev->wep_current_index].size != 0) {
-+		log(L_ASSOC, "setting active default WEP key number: %d\n",
-+				adev->wep_current_index);
-+		dk.KeyID = adev->wep_current_index;
-+		acx_s_configure(adev, &dk, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET); /* 0x1010 */
-+	}
-+	/* FIXME!!! wep_key_struct is filled nowhere! But adev
-+	 * is initialized to 0, and we don't REALLY need those keys either */
-+/*		for (i = 0; i < 10; i++) {
-+		if (adev->wep_key_struct[i].len != 0) {
-+			MAC_COPY(wep_mgmt.MacAddr, adev->wep_key_struct[i].addr);
-+			wep_mgmt.KeySize = cpu_to_le16(adev->wep_key_struct[i].len);
-+			memcpy(&wep_mgmt.Key, adev->wep_key_struct[i].key, le16_to_cpu(wep_mgmt.KeySize));
-+			wep_mgmt.Action = cpu_to_le16(1);
-+			log(L_ASSOC, "writing WEP key %d (len %d)\n", i, le16_to_cpu(wep_mgmt.KeySize));
-+			if (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &wep_mgmt, sizeof(wep_mgmt))) {
-+				adev->wep_key_struct[i].index = i;
-+			}
-+		}
-+	}
-+*/
-+
-+	/* now retrieve the updated WEPCacheEnd pointer... */
-+	if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) {
-+		printk("%s: ACX1xx_IE_MEMORY_MAP read #2 FAILED\n",
-+				adev->ndev->name);
-+		goto fail;
-+	}
-+	/* ...and tell it to start allocating templates at that location */
-+	/* (no endianness conversion needed) */
-+	pt.PacketTemplateStart = pt.WEPCacheEnd;
-+
-+	if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) {
-+		printk("%s: ACX1xx_IE_MEMORY_MAP write #2 FAILED\n",
-+				adev->ndev->name);
-+		goto fail;
-+	}
-+	res = OK;
-+
-+fail:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+static int
-+acx_s_init_max_template_generic(acx_device_t *adev, unsigned int len, unsigned int cmd)
-+{
-+	int res;
-+	union {
-+		acx_template_nullframe_t null;
-+		acx_template_beacon_t b;
-+		acx_template_tim_t tim;
-+		acx_template_probereq_t preq;
-+		acx_template_proberesp_t presp;
-+	} templ;
-+
-+	memset(&templ, 0, len);
-+	templ.null.size = cpu_to_le16(len - 2);
-+	res = acx_s_issue_cmd(adev, cmd, &templ, len);
-+	return res;
-+}
-+
-+static inline int
-+acx_s_init_max_null_data_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_nullframe_t), ACX1xx_CMD_CONFIG_NULL_DATA
-+	);
-+}
-+
-+static inline int
-+acx_s_init_max_beacon_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_beacon_t), ACX1xx_CMD_CONFIG_BEACON
-+	);
-+}
-+
-+static inline int
-+acx_s_init_max_tim_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_tim_t), ACX1xx_CMD_CONFIG_TIM
-+	);
-+}
-+
-+static inline int
-+acx_s_init_max_probe_response_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_proberesp_t), ACX1xx_CMD_CONFIG_PROBE_RESPONSE
-+	);
-+}
-+
-+static inline int
-+acx_s_init_max_probe_request_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_probereq_t), ACX1xx_CMD_CONFIG_PROBE_REQUEST
-+	);
-+}
-+
-+/***********************************************************************
-+** acx_s_set_tim_template
-+**
-+** FIXME: In full blown driver we will regularly update partial virtual bitmap
-+** by calling this function
-+** (it can be done by irq handler on each DTIM irq or by timer...)
-+
-+[802.11 7.3.2.6] TIM information element:
-+- 1 EID
-+- 1 Length
-+1 1 DTIM Count
-+    indicates how many beacons (including this) appear before next DTIM
-+    (0=this one is a DTIM)
-+2 1 DTIM Period
-+    number of beacons between successive DTIMs
-+    (0=reserved, 1=all TIMs are DTIMs, 2=every other, etc)
-+3 1 Bitmap Control
-+    bit0: Traffic Indicator bit associated with Assoc ID 0 (Bcast AID?)
-+    set to 1 in TIM elements with a value of 0 in the DTIM Count field
-+    when one or more broadcast or multicast frames are buffered at the AP.
-+    bit1-7: Bitmap Offset (logically Bitmap_Offset = Bitmap_Control & 0xFE).
-+4 n Partial Virtual Bitmap
-+    Visible part of traffic-indication bitmap.
-+    Full bitmap consists of 2008 bits (251 octets) such that bit number N
-+    (0<=N<=2007) in the bitmap corresponds to bit number (N mod 8)
-+    in octet number N/8 where the low-order bit of each octet is bit0,
-+    and the high order bit is bit7.
-+    Each set bit in virtual bitmap corresponds to traffic buffered by AP
-+    for a specific station (with corresponding AID?).
-+    Partial Virtual Bitmap shows a part of bitmap which has non-zero.
-+    Bitmap Offset is a number of skipped zero octets (see above).
-+    'Missing' octets at the tail are also assumed to be zero.
-+    Example: Length=6, Bitmap_Offset=2, Partial_Virtual_Bitmap=55 55 55
-+    This means that traffic-indication bitmap is:
-+    00000000 00000000 01010101 01010101 01010101 00000000 00000000...
-+    (is bit0 in the map is always 0 and real value is in Bitmap Control bit0?)
-+*/
-+static int
-+acx_s_set_tim_template(acx_device_t *adev)
-+{
-+/* For now, configure smallish test bitmap, all zero ("no pending data") */
-+	enum { bitmap_size = 5 };
-+
-+	acx_template_tim_t t;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	memset(&t, 0, sizeof(t));
-+	t.size = 5 + bitmap_size; /* eid+len+count+period+bmap_ctrl + bmap */
-+	t.tim_eid = WLAN_EID_TIM;
-+	t.len = 3 + bitmap_size; /* count+period+bmap_ctrl + bmap */
-+	result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_TIM, &t, sizeof(t));
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_fill_beacon_or_proberesp_template
-+**
-+** For frame format info, please see 802.11-1999.pdf item 7.2.3.9 and below!!
-+**
-+** NB: we use the fact that
-+** struct acx_template_proberesp and struct acx_template_beacon are the same
-+** (well, almost...)
-+**
-+** [802.11] Beacon's body consist of these IEs:
-+** 1 Timestamp
-+** 2 Beacon interval
-+** 3 Capability information
-+** 4 SSID
-+** 5 Supported rates (up to 8 rates)
-+** 6 FH Parameter Set (frequency-hopping PHYs only)
-+** 7 DS Parameter Set (direct sequence PHYs only)
-+** 8 CF Parameter Set (only if PCF is supported)
-+** 9 IBSS Parameter Set (ad-hoc only)
-+**
-+** Beacon only:
-+** 10 TIM (AP only) (see 802.11 7.3.2.6)
-+** 11 Country Information (802.11d)
-+** 12 FH Parameters (802.11d)
-+** 13 FH Pattern Table (802.11d)
-+** ... (?!! did not yet find relevant PDF file... --vda)
-+** 19 ERP Information (extended rate PHYs)
-+** 20 Extended Supported Rates (if more than 8 rates)
-+**
-+** Proberesp only:
-+** 10 Country information (802.11d)
-+** 11 FH Parameters (802.11d)
-+** 12 FH Pattern Table (802.11d)
-+** 13-n Requested information elements (802.11d)
-+** ????
-+** 18 ERP Information (extended rate PHYs)
-+** 19 Extended Supported Rates (if more than 8 rates)
-+*/
-+static int
-+acx_fill_beacon_or_proberesp_template(acx_device_t *adev,
-+					struct acx_template_beacon *templ,
-+					u16 fc /* in host order! */)
-+{
-+	int len;
-+	u8 *p;
-+
-+	FN_ENTER;
-+
-+	memset(templ, 0, sizeof(*templ));
-+	MAC_BCAST(templ->da);
-+	MAC_COPY(templ->sa, adev->dev_addr);
-+	MAC_COPY(templ->bssid, adev->bssid);
-+
-+	templ->beacon_interval = cpu_to_le16(adev->beacon_interval);
-+	acx_update_capabilities(adev);
-+	templ->cap = cpu_to_le16(adev->capabilities);
-+
-+	p = templ->variable;
-+	p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid);
-+	p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported);
-+	p = wlan_fill_ie_ds_parms(p, adev->channel);
-+	/* NB: should go AFTER tim, but acx seem to keep tim last always */
-+	p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+		/* ATIM window */
-+		p = wlan_fill_ie_ibss_parms(p, 0); break;
-+	case ACX_MODE_3_AP:
-+		/* TIM IE is set up as separate template */
-+		break;
-+	}
-+
-+	len = p - (u8*)templ;
-+	templ->fc = cpu_to_le16(WF_FTYPE_MGMT | fc);
-+	/* - 2: do not count 'u16 size' field */
-+	templ->size = cpu_to_le16(len - 2);
-+
-+	FN_EXIT1(len);
-+	return len;
-+}
-+
-+
-+#if POWER_SAVE_80211
-+/***********************************************************************
-+** acx_s_set_null_data_template
-+*/
-+static int
-+acx_s_set_null_data_template(acx_device_t *adev)
-+{
-+	struct acx_template_nullframe b;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	/* memset(&b, 0, sizeof(b)); not needed, setting all members */
-+
-+	b.size = cpu_to_le16(sizeof(b) - 2);
-+	b.hdr.fc = WF_FTYPE_MGMTi | WF_FSTYPE_NULLi;
-+	b.hdr.dur = 0;
-+	MAC_BCAST(b.hdr.a1);
-+	MAC_COPY(b.hdr.a2, adev->dev_addr);
-+	MAC_COPY(b.hdr.a3, adev->bssid);
-+	b.hdr.seq = 0;
-+
-+	result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_NULL_DATA, &b, sizeof(b));
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_s_set_beacon_template
-+*/
-+static int
-+acx_s_set_beacon_template(acx_device_t *adev)
-+{
-+	struct acx_template_beacon bcn;
-+	int len, result;
-+
-+	FN_ENTER;
-+
-+	len = acx_fill_beacon_or_proberesp_template(adev, &bcn, WF_FSTYPE_BEACON);
-+	result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_BEACON, &bcn, len);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_set_probe_response_template
-+*/
-+static int
-+acx_s_set_probe_response_template(acx_device_t *adev)
-+{
-+	struct acx_template_proberesp pr;
-+	int len, result;
-+
-+	FN_ENTER;
-+
-+	len = acx_fill_beacon_or_proberesp_template(adev, &pr, WF_FSTYPE_PROBERESP);
-+	result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_RESPONSE, &pr, len);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_init_packet_templates()
-+**
-+** NOTE: order is very important here, to have a correct memory layout!
-+** init templates: max Probe Request (station mode), max NULL data,
-+** max Beacon, max TIM, max Probe Response.
-+*/
-+static int
-+acx_s_init_packet_templates(acx_device_t *adev)
-+{
-+	acx_ie_memmap_t mm; /* ACX100 only */
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	log(L_DEBUG|L_INIT, "initializing max packet templates\n");
-+
-+	if (OK != acx_s_init_max_probe_request_template(adev))
-+		goto failed;
-+
-+	if (OK != acx_s_init_max_null_data_template(adev))
-+		goto failed;
-+
-+	if (OK != acx_s_init_max_beacon_template(adev))
-+		goto failed;
-+
-+	if (OK != acx_s_init_max_tim_template(adev))
-+		goto failed;
-+
-+	if (OK != acx_s_init_max_probe_response_template(adev))
-+		goto failed;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111 doesn't need the memory map magic below,
-+		 * and the other templates will be set later (acx_start) */
-+		result = OK;
-+		goto success;
-+	}
-+
-+	/* ACX100 will have its TIM template set,
-+	 * and we also need to update the memory map */
-+
-+	if (OK != acx_s_set_tim_template(adev))
-+		goto failed_acx100;
-+
-+	log(L_DEBUG, "sizeof(memmap)=%d bytes\n", (int)sizeof(mm));
-+
-+	if (OK != acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP))
-+		goto failed_acx100;
-+
-+	mm.QueueStart = cpu_to_le32(le32_to_cpu(mm.PacketTemplateEnd) + 4);
-+	if (OK != acx_s_configure(adev, &mm, ACX1xx_IE_MEMORY_MAP))
-+		goto failed_acx100;
-+
-+	result = OK;
-+	goto success;
-+
-+failed_acx100:
-+	log(L_DEBUG|L_INIT,
-+		/* "cb=0x%X\n" */
-+		"ACXMemoryMap:\n"
-+		".CodeStart=0x%X\n"
-+		".CodeEnd=0x%X\n"
-+		".WEPCacheStart=0x%X\n"
-+		".WEPCacheEnd=0x%X\n"
-+		".PacketTemplateStart=0x%X\n"
-+		".PacketTemplateEnd=0x%X\n",
-+		/* len, */
-+		le32_to_cpu(mm.CodeStart),
-+		le32_to_cpu(mm.CodeEnd),
-+		le32_to_cpu(mm.WEPCacheStart),
-+		le32_to_cpu(mm.WEPCacheEnd),
-+		le32_to_cpu(mm.PacketTemplateStart),
-+		le32_to_cpu(mm.PacketTemplateEnd));
-+
-+failed:
-+	printk("%s: %s() FAILED\n", adev->ndev->name, __func__);
-+
-+success:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_s_set_probe_request_template(acx_device_t *adev)
-+{
-+	struct acx_template_probereq probereq;
-+	char *p;
-+	int res;
-+	int frame_len;
-+
-+	FN_ENTER;
-+
-+	memset(&probereq, 0, sizeof(probereq));
-+
-+	probereq.fc = WF_FTYPE_MGMTi | WF_FSTYPE_PROBEREQi;
-+	MAC_BCAST(probereq.da);
-+	MAC_COPY(probereq.sa, adev->dev_addr);
-+	MAC_BCAST(probereq.bssid);
-+
-+	p = probereq.variable;
-+	p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid);
-+	p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported);
-+	p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported);
-+	frame_len = p - (char*)&probereq;
-+	probereq.size = cpu_to_le16(frame_len - 2);
-+
-+	res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_REQUEST, &probereq, frame_len);
-+	FN_EXIT0;
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_init_mac
-+*/
-+int
-+acx_s_init_mac(acx_device_t *adev)
-+{
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	if (IS_ACX111(adev)) {
-+		adev->ie_len = acx111_ie_len;
-+		adev->ie_len_dot11 = acx111_ie_len_dot11;
-+	} else {
-+		adev->ie_len = acx100_ie_len;
-+		adev->ie_len_dot11 = acx100_ie_len_dot11;
-+	}
-+
-+#if defined (ACX_MEM)
-+		adev->memblocksize = 256; /* 256 is default */
-+		/* try to load radio for both ACX100 and ACX111, since both
-+		 * chips have at least some firmware versions making use of an
-+		 * external radio module */
-+		acxmem_s_upload_radio(adev);
-+#else
-+	if (IS_PCI(adev)) {
-+		adev->memblocksize = 256; /* 256 is default */
-+		/* try to load radio for both ACX100 and ACX111, since both
-+		 * chips have at least some firmware versions making use of an
-+		 * external radio module */
-+		acxpci_s_upload_radio(adev);
-+	} else {
-+		adev->memblocksize = 128;
-+	}
-+#endif
-+
-+	if (IS_ACX111(adev)) {
-+		/* for ACX111, the order is different from ACX100
-+		   1. init packet templates
-+		   2. create station context and create dma regions
-+		   3. init wep default keys
-+		*/
-+		if (OK != acx_s_init_packet_templates(adev))
-+			goto fail;
-+		if (OK != acx111_s_create_dma_regions(adev)) {
-+			printk("%s: acx111_create_dma_regions FAILED\n",
-+						adev->ndev->name);
-+			goto fail;
-+		}
-+	} else {
-+		if (OK != acx100_s_init_wep(adev))
-+			goto fail;
-+		if (OK != acx_s_init_packet_templates(adev))
-+			goto fail;
-+		if (OK != acx100_s_create_dma_regions(adev)) {
-+			printk("%s: acx100_create_dma_regions FAILED\n",
-+						adev->ndev->name);
-+			goto fail;
-+		}
-+	}
-+
-+	MAC_COPY(adev->ndev->dev_addr, adev->dev_addr);
-+	result = OK;
-+
-+fail:
-+	if (result)
-+		printk("acx: init_mac() FAILED\n");
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+void
-+acx_s_set_sane_reg_domain(acx_device_t *adev, int do_set)
-+{
-+	unsigned mask;
-+
-+	unsigned int i;
-+
-+	for (i = 0; i < sizeof(acx_reg_domain_ids); i++)
-+		if (acx_reg_domain_ids[i] == adev->reg_dom_id)
-+			break;
-+
-+	if (sizeof(acx_reg_domain_ids) == i) {
-+		log(L_INIT, "Invalid or unsupported regulatory domain"
-+			       " 0x%02X specified, falling back to FCC (USA)!"
-+			       " Please report if this sounds fishy!\n",
-+				adev->reg_dom_id);
-+		i = 0;
-+		adev->reg_dom_id = acx_reg_domain_ids[i];
-+
-+		/* since there was a mismatch, we need to force updating */
-+		do_set = 1;
-+	}
-+
-+	if (do_set) {
-+		acx_ie_generic_t dom;
-+		dom.m.bytes[0] = adev->reg_dom_id;
-+		acx_s_configure(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN);
-+	}
-+
-+	adev->reg_dom_chanmask = reg_domain_channel_masks[i];
-+
-+	mask = (1 << (adev->channel - 1));
-+	if (!(adev->reg_dom_chanmask & mask)) {
-+	/* hmm, need to adjust our channel to reside within domain */
-+		mask = 1;
-+		for (i = 1; i <= 14; i++) {
-+			if (adev->reg_dom_chanmask & mask) {
-+				printk("%s: adjusting selected channel from %d "
-+					"to %d due to new regulatory domain\n",
-+					adev->ndev->name, adev->channel, i);
-+				adev->channel = i;
-+				break;
-+			}
-+			mask <<= 1;
-+		}
-+	}
-+}
-+
-+
-+#if POWER_SAVE_80211
-+static void
-+acx_s_update_80211_powersave_mode(acx_device_t *adev)
-+{
-+	/* merge both structs in a union to be able to have common code */
-+	union {
-+		acx111_ie_powersave_t acx111;
-+		acx100_ie_powersave_t acx100;
-+	} pm;
-+
-+	/* change 802.11 power save mode settings */
-+	log(L_INIT, "updating 802.11 power save mode settings: "
-+		"wakeup_cfg 0x%02X, listen interval %u, "
-+		"options 0x%02X, hangover period %u, "
-+		"enhanced_ps_transition_time %u\n",
-+		adev->ps_wakeup_cfg, adev->ps_listen_interval,
-+		adev->ps_options, adev->ps_hangover_period,
-+		adev->ps_enhanced_transition_time);
-+	acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT);
-+	log(L_INIT, "Previous PS mode settings: wakeup_cfg 0x%02X, "
-+		"listen interval %u, options 0x%02X, "
-+		"hangover period %u, "
-+		"enhanced_ps_transition_time %u, beacon_rx_time %u\n",
-+		pm.acx111.wakeup_cfg,
-+		pm.acx111.listen_interval,
-+		pm.acx111.options,
-+		pm.acx111.hangover_period,
-+		IS_ACX111(adev) ?
-+			pm.acx111.enhanced_ps_transition_time
-+		      : pm.acx100.enhanced_ps_transition_time,
-+		IS_ACX111(adev) ?
-+			pm.acx111.beacon_rx_time
-+		      : (u32)-1
-+		);
-+	pm.acx111.wakeup_cfg = adev->ps_wakeup_cfg;
-+	pm.acx111.listen_interval = adev->ps_listen_interval;
-+	pm.acx111.options = adev->ps_options;
-+	pm.acx111.hangover_period = adev->ps_hangover_period;
-+	if (IS_ACX111(adev)) {
-+		pm.acx111.beacon_rx_time = cpu_to_le32(adev->ps_beacon_rx_time);
-+		pm.acx111.enhanced_ps_transition_time = cpu_to_le32(adev->ps_enhanced_transition_time);
-+	} else {
-+		pm.acx100.enhanced_ps_transition_time = cpu_to_le16(adev->ps_enhanced_transition_time);
-+	}
-+	acx_s_configure(adev, &pm, ACX1xx_IE_POWER_MGMT);
-+	acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT);
-+	log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg);
-+	acx_s_msleep(40);
-+	acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT);
-+	log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg);
-+	log(L_INIT, "power save mode change %s\n",
-+		(pm.acx111.wakeup_cfg & PS_CFG_PENDING) ? "FAILED" : "was successful");
-+	/* FIXME: maybe verify via PS_CFG_PENDING bit here
-+	 * that power save mode change was successful. */
-+	/* FIXME: we shouldn't trigger a scan immediately after
-+	 * fiddling with power save mode (since the firmware is sending
-+	 * a NULL frame then). */
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_s_update_card_settings
-+**
-+** Applies accumulated changes in various adev->xxxx members
-+** Called by ioctl commit handler, acx_start, acx_set_defaults,
-+** acx_s_after_interrupt_task (if IRQ_CMD_UPDATE_CARD_CFG),
-+*/
-+static void
-+acx111_s_sens_radio_16_17(acx_device_t *adev)
-+{
-+	u32 feature1, feature2;
-+
-+	if ((adev->sensitivity < 1) || (adev->sensitivity > 3)) {
-+		printk("%s: invalid sensitivity setting (1..3), "
-+			"setting to 1\n", adev->ndev->name);
-+		adev->sensitivity = 1;
-+	}
-+	acx111_s_get_feature_config(adev, &feature1, &feature2);
-+	CLEAR_BIT(feature1, FEATURE1_LOW_RX|FEATURE1_EXTRA_LOW_RX);
-+	if (adev->sensitivity > 1)
-+		SET_BIT(feature1, FEATURE1_LOW_RX);
-+	if (adev->sensitivity > 2)
-+		SET_BIT(feature1, FEATURE1_EXTRA_LOW_RX);
-+	acx111_s_feature_set(adev, feature1, feature2);
-+}
-+
-+
-+void
-+acx_s_update_card_settings(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+	unsigned int start_scan = 0;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X\n",
-+			adev->get_mask, adev->set_mask);
-+
-+	/* Track dependencies betweed various settings */
-+
-+	if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_WEP)) {
-+		log(L_INIT, "important setting has been changed. "
-+			"Need to update packet templates, too\n");
-+		SET_BIT(adev->set_mask, SET_TEMPLATES);
-+	}
-+	if (adev->set_mask & GETSET_CHANNEL) {
-+		/* This will actually tune RX/TX to the channel */
-+		SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX);
-+		switch (adev->mode) {
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_3_AP:
-+			/* Beacons contain channel# - update them */
-+			SET_BIT(adev->set_mask, SET_TEMPLATES);
-+		}
-+		switch (adev->mode) {
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_2_STA:
-+			start_scan = 1;
-+		}
-+	}
-+
-+	/* Apply settings */
-+
-+#ifdef WHY_SHOULD_WE_BOTHER /* imagine we were just powered off */
-+	/* send a disassoc request in case it's required */
-+	if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_CHANNEL|GETSET_WEP)) {
-+		if (ACX_MODE_2_STA == adev->mode) {
-+			if (ACX_STATUS_4_ASSOCIATED == adev->status) {
-+				log(L_ASSOC, "we were ASSOCIATED - "
-+					"sending disassoc request\n");
-+				acx_lock(adev, flags);
-+				acx_l_transmit_disassoc(adev, NULL);
-+				/* FIXME: deauth? */
-+				acx_unlock(adev, flags);
-+			}
-+			/* need to reset some other stuff as well */
-+			log(L_DEBUG, "resetting bssid\n");
-+			MAC_ZERO(adev->bssid);
-+			SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST);
-+			start_scan = 1;
-+		}
-+	}
-+#endif
-+
-+	if (adev->get_mask & GETSET_STATION_ID) {
-+		u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN];
-+		const u8 *paddr;
-+
-+		acx_s_interrogate(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID);
-+		paddr = &stationID[4];
-+		for (i = 0; i < ETH_ALEN; i++) {
-+			/* we copy the MAC address (reversed in
-+			 * the card) to the netdevice's MAC
-+			 * address, and on ifup it will be
-+			 * copied into iwadev->dev_addr */
-+			adev->ndev->dev_addr[ETH_ALEN - 1 - i] = paddr[i];
-+		}
-+		CLEAR_BIT(adev->get_mask, GETSET_STATION_ID);
-+	}
-+
-+	if (adev->get_mask & GETSET_SENSITIVITY) {
-+		if ((RADIO_RFMD_11 == adev->radio_type)
-+		|| (RADIO_MAXIM_0D == adev->radio_type)
-+		|| (RADIO_RALINK_15 == adev->radio_type)) {
-+			acx_s_read_phy_reg(adev, 0x30, &adev->sensitivity);
-+		} else {
-+			log(L_INIT, "don't know how to get sensitivity "
-+				"for radio type 0x%02X\n", adev->radio_type);
-+			adev->sensitivity = 0;
-+		}
-+		log(L_INIT, "got sensitivity value %u\n", adev->sensitivity);
-+
-+		CLEAR_BIT(adev->get_mask, GETSET_SENSITIVITY);
-+	}
-+
-+	if (adev->get_mask & GETSET_ANTENNA) {
-+		u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN];
-+
-+		memset(antenna, 0, sizeof(antenna));
-+		acx_s_interrogate(adev, antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA);
-+		adev->antenna = antenna[4];
-+		log(L_INIT, "got antenna value 0x%02X\n", adev->antenna);
-+		CLEAR_BIT(adev->get_mask, GETSET_ANTENNA);
-+	}
-+
-+	if (adev->get_mask & GETSET_ED_THRESH) {
-+		if (IS_ACX100(adev))	{
-+			u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN];
-+
-+			memset(ed_threshold, 0, sizeof(ed_threshold));
-+			acx_s_interrogate(adev, ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD);
-+			adev->ed_threshold = ed_threshold[4];
-+		} else {
-+			log(L_INIT, "acx111 doesn't support ED\n");
-+			adev->ed_threshold = 0;
-+		}
-+		log(L_INIT, "got Energy Detect (ED) threshold %u\n", adev->ed_threshold);
-+		CLEAR_BIT(adev->get_mask, GETSET_ED_THRESH);
-+	}
-+
-+	if (adev->get_mask & GETSET_CCA) {
-+		if (IS_ACX100(adev))	{
-+			u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN];
-+
-+			memset(cca, 0, sizeof(adev->cca));
-+			acx_s_interrogate(adev, cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE);
-+			adev->cca = cca[4];
-+		} else {
-+			log(L_INIT, "acx111 doesn't support CCA\n");
-+			adev->cca = 0;
-+		}
-+		log(L_INIT, "got Channel Clear Assessment (CCA) value %u\n", adev->cca);
-+		CLEAR_BIT(adev->get_mask, GETSET_CCA);
-+	}
-+
-+	if (adev->get_mask & GETSET_REG_DOMAIN) {
-+		acx_ie_generic_t dom;
-+
-+		acx_s_interrogate(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN);
-+		adev->reg_dom_id = dom.m.bytes[0];
-+		acx_s_set_sane_reg_domain(adev, 0);
-+		log(L_INIT, "got regulatory domain 0x%02X\n", adev->reg_dom_id);
-+		CLEAR_BIT(adev->get_mask, GETSET_REG_DOMAIN);
-+	}
-+
-+	if (adev->set_mask & GETSET_STATION_ID) {
-+		u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN];
-+		u8 *paddr;
-+
-+		paddr = &stationID[4];
-+		memcpy(adev->dev_addr, adev->ndev->dev_addr, ETH_ALEN);
-+		for (i = 0; i < ETH_ALEN; i++) {
-+			/* copy the MAC address we obtained when we noticed
-+			 * that the ethernet iface's MAC changed
-+			 * to the card (reversed in
-+			 * the card!) */
-+			paddr[i] = adev->dev_addr[ETH_ALEN - 1 - i];
-+		}
-+		acx_s_configure(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID);
-+		CLEAR_BIT(adev->set_mask, GETSET_STATION_ID);
-+	}
-+
-+	if (adev->set_mask & SET_TEMPLATES) {
-+		log(L_INIT, "updating packet templates\n");
-+		switch (adev->mode) {
-+		case ACX_MODE_2_STA:
-+			acx_s_set_probe_request_template(adev);
-+#if POWER_SAVE_80211
-+			acx_s_set_null_data_template(adev);
-+#endif
-+			break;
-+		case ACX_MODE_0_ADHOC:
-+			acx_s_set_probe_request_template(adev);
-+#if POWER_SAVE_80211
-+			/* maybe power save functionality is somehow possible
-+			 * for Ad-Hoc mode, too... FIXME: verify it somehow? firmware debug fields? */
-+			acx_s_set_null_data_template(adev);
-+#endif
-+			/* fall through */
-+		case ACX_MODE_3_AP:
-+			acx_s_set_beacon_template(adev);
-+			acx_s_set_tim_template(adev);
-+			/* BTW acx111 firmware would not send probe responses
-+			** if probe request does not have all basic rates flagged
-+			** by 0x80! Thus firmware does not conform to 802.11,
-+			** it should ignore 0x80 bit in ratevector from STA.
-+			** We can 'fix' it by not using this template and
-+			** sending probe responses by hand. TODO --vda */
-+			acx_s_set_probe_response_template(adev);
-+		}
-+		/* Needed if generated frames are to be emitted at different tx rate now */
-+		log(L_IRQ, "redoing cmd_join_bssid() after template cfg\n");
-+		acx_s_cmd_join_bssid(adev, adev->bssid);
-+		CLEAR_BIT(adev->set_mask, SET_TEMPLATES);
-+	}
-+	if (adev->set_mask & SET_STA_LIST) {
-+		acx_lock(adev, flags);
-+		acx_l_sta_list_init(adev);
-+		CLEAR_BIT(adev->set_mask, SET_STA_LIST);
-+		acx_unlock(adev, flags);
-+	}
-+	if (adev->set_mask & SET_RATE_FALLBACK) {
-+		u8 rate[4 + ACX1xx_IE_RATE_FALLBACK_LEN];
-+
-+		/* configure to not do fallbacks when not in auto rate mode */
-+		rate[4] = (adev->rate_auto) ? /* adev->txrate_fallback_retries */ 1 : 0;
-+		log(L_INIT, "updating Tx fallback to %u retries\n", rate[4]);
-+		acx_s_configure(adev, &rate, ACX1xx_IE_RATE_FALLBACK);
-+		CLEAR_BIT(adev->set_mask, SET_RATE_FALLBACK);
-+	}
-+	if (adev->set_mask & GETSET_TXPOWER) {
-+		log(L_INIT, "updating transmit power: %u dBm\n",
-+					adev->tx_level_dbm);
-+		acx_s_set_tx_level(adev, adev->tx_level_dbm);
-+		CLEAR_BIT(adev->set_mask, GETSET_TXPOWER);
-+	}
-+
-+	if (adev->set_mask & GETSET_SENSITIVITY) {
-+		log(L_INIT, "updating sensitivity value: %u\n",
-+					adev->sensitivity);
-+		switch (adev->radio_type) {
-+		case RADIO_RFMD_11:
-+		case RADIO_MAXIM_0D:
-+		case RADIO_RALINK_15:
-+			acx_s_write_phy_reg(adev, 0x30, adev->sensitivity);
-+			break;
-+		case RADIO_RADIA_16:
-+		case RADIO_UNKNOWN_17:
-+			acx111_s_sens_radio_16_17(adev);
-+			break;
-+		default:
-+			log(L_INIT, "don't know how to modify sensitivity "
-+				"for radio type 0x%02X\n", adev->radio_type);
-+		}
-+		CLEAR_BIT(adev->set_mask, GETSET_SENSITIVITY);
-+	}
-+
-+	if (adev->set_mask & GETSET_ANTENNA) {
-+		/* antenna */
-+		u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN];
-+
-+		memset(antenna, 0, sizeof(antenna));
-+		antenna[4] = adev->antenna;
-+		log(L_INIT, "updating antenna value: 0x%02X\n",
-+					adev->antenna);
-+		acx_s_configure(adev, &antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA);
-+		CLEAR_BIT(adev->set_mask, GETSET_ANTENNA);
-+	}
-+
-+	if (adev->set_mask & GETSET_ED_THRESH) {
-+		/* ed_threshold */
-+		log(L_INIT, "updating Energy Detect (ED) threshold: %u\n",
-+					adev->ed_threshold);
-+		if (IS_ACX100(adev)) {
-+			u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN];
-+
-+			memset(ed_threshold, 0, sizeof(ed_threshold));
-+			ed_threshold[4] = adev->ed_threshold;
-+			acx_s_configure(adev, &ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD);
-+		}
-+		else
-+			log(L_INIT, "acx111 doesn't support ED!\n");
-+		CLEAR_BIT(adev->set_mask, GETSET_ED_THRESH);
-+	}
-+
-+	if (adev->set_mask & GETSET_CCA) {
-+		/* CCA value */
-+		log(L_INIT, "updating Channel Clear Assessment "
-+				"(CCA) value: 0x%02X\n", adev->cca);
-+		if (IS_ACX100(adev))	{
-+			u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN];
-+
-+			memset(cca, 0, sizeof(cca));
-+			cca[4] = adev->cca;
-+			acx_s_configure(adev, &cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE);
-+		}
-+		else
-+			log(L_INIT, "acx111 doesn't support CCA!\n");
-+		CLEAR_BIT(adev->set_mask, GETSET_CCA);
-+	}
-+
-+	if (adev->set_mask & GETSET_LED_POWER) {
-+		/* Enable Tx */
-+		log(L_INIT, "updating power LED status: %u\n", adev->led_power);
-+
-+		acx_lock(adev, flags);
-+#if defined (ACX_MEM)
-+		acxmem_l_power_led(adev, adev->led_power);
-+#else
-+		if (IS_PCI(adev))
-+			acxpci_l_power_led(adev, adev->led_power);
-+#endif
-+		CLEAR_BIT(adev->set_mask, GETSET_LED_POWER);
-+		acx_unlock(adev, flags);
-+	}
-+
-+	if (adev->set_mask & GETSET_POWER_80211) {
-+#if POWER_SAVE_80211
-+		acx_s_update_80211_powersave_mode(adev);
-+#endif
-+		CLEAR_BIT(adev->set_mask, GETSET_POWER_80211);
-+	}
-+
-+	if (adev->set_mask & GETSET_CHANNEL) {
-+		/* channel */
-+		log(L_INIT, "updating channel to: %u\n", adev->channel);
-+		CLEAR_BIT(adev->set_mask, GETSET_CHANNEL);
-+	}
-+
-+	if (adev->set_mask & GETSET_TX) {
-+		/* set Tx */
-+		log(L_INIT, "updating: %s Tx\n",
-+				adev->tx_disabled ? "disable" : "enable");
-+		if (adev->tx_disabled)
-+			acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+		else
-+			acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1);
-+		CLEAR_BIT(adev->set_mask, GETSET_TX);
-+	}
-+
-+	if (adev->set_mask & GETSET_RX) {
-+		/* Enable Rx */
-+		log(L_INIT, "updating: enable Rx on channel: %u\n",
-+				adev->channel);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1);
-+		CLEAR_BIT(adev->set_mask, GETSET_RX);
-+	}
-+
-+	if (adev->set_mask & GETSET_RETRY) {
-+		u8 short_retry[4 + ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN];
-+		u8 long_retry[4 + ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN];
-+
-+		log(L_INIT, "updating short retry limit: %u, long retry limit: %u\n",
-+					adev->short_retry, adev->long_retry);
-+		short_retry[0x4] = adev->short_retry;
-+		long_retry[0x4] = adev->long_retry;
-+		acx_s_configure(adev, &short_retry, ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT);
-+		acx_s_configure(adev, &long_retry, ACX1xx_IE_DOT11_LONG_RETRY_LIMIT);
-+		CLEAR_BIT(adev->set_mask, GETSET_RETRY);
-+	}
-+
-+	if (adev->set_mask & SET_MSDU_LIFETIME) {
-+		u8 xmt_msdu_lifetime[4 + ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN];
-+
-+		log(L_INIT, "updating tx MSDU lifetime: %u\n",
-+					adev->msdu_lifetime);
-+		*(u32 *)&xmt_msdu_lifetime[4] = cpu_to_le32((u32)adev->msdu_lifetime);
-+		acx_s_configure(adev, &xmt_msdu_lifetime, ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME);
-+		CLEAR_BIT(adev->set_mask, SET_MSDU_LIFETIME);
-+	}
-+
-+	if (adev->set_mask & GETSET_REG_DOMAIN) {
-+		log(L_INIT, "updating regulatory domain: 0x%02X\n",
-+					adev->reg_dom_id);
-+		acx_s_set_sane_reg_domain(adev, 1);
-+		CLEAR_BIT(adev->set_mask, GETSET_REG_DOMAIN);
-+	}
-+
-+	if (adev->set_mask & GETSET_MODE) {
-+		adev->ndev->type = (adev->mode == ACX_MODE_MONITOR) ?
-+			adev->monitor_type : ARPHRD_ETHER;
-+
-+		switch (adev->mode) {
-+		case ACX_MODE_3_AP:
-+
-+			acx_lock(adev, flags);
-+			acx_l_sta_list_init(adev);
-+			adev->aid = 0;
-+			adev->ap_client = NULL;
-+			MAC_COPY(adev->bssid, adev->dev_addr);
-+			/* this basically says "we're connected" */
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+			acx_unlock(adev, flags);
-+
-+			acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER);
-+			/* start sending beacons */
-+			acx_s_cmd_join_bssid(adev, adev->bssid);
-+			break;
-+		case ACX_MODE_MONITOR:
-+			acx111_s_feature_on(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER);
-+			/* this stops beacons */
-+			acx_s_cmd_join_bssid(adev, adev->bssid);
-+			/* this basically says "we're connected" */
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+			SET_BIT(adev->set_mask, SET_RXCONFIG|SET_WEP_OPTIONS);
-+			break;
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_2_STA:
-+			acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER);
-+
-+			acx_lock(adev, flags);
-+			adev->aid = 0;
-+			adev->ap_client = NULL;
-+			acx_unlock(adev, flags);
-+
-+			/* we want to start looking for peer or AP */
-+			start_scan = 1;
-+			break;
-+		case ACX_MODE_OFF:
-+			/* TODO: disable RX/TX, stop any scanning activity etc: */
-+			/* adev->tx_disabled = 1; */
-+			/* SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX); */
-+
-+			/* This stops beacons (invalid macmode...) */
-+			acx_s_cmd_join_bssid(adev, adev->bssid);
-+			acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+			break;
-+		}
-+		CLEAR_BIT(adev->set_mask, GETSET_MODE);
-+	}
-+
-+	if (adev->set_mask & SET_RXCONFIG) {
-+		acx_s_initialize_rx_config(adev);
-+		CLEAR_BIT(adev->set_mask, SET_RXCONFIG);
-+	}
-+
-+	if (adev->set_mask & GETSET_RESCAN) {
-+		switch (adev->mode) {
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_2_STA:
-+			start_scan = 1;
-+			break;
-+		}
-+		CLEAR_BIT(adev->set_mask, GETSET_RESCAN);
-+	}
-+
-+	if (adev->set_mask & GETSET_WEP) {
-+		/* encode */
-+
-+		ie_dot11WEPDefaultKeyID_t dkey;
-+#ifdef DEBUG_WEP
-+		struct {
-+			u16 type;
-+			u16 len;
-+			u8  val;
-+		} ACX_PACKED keyindic;
-+#endif
-+		log(L_INIT, "updating WEP key settings\n");
-+
-+		acx_s_set_wepkey(adev);
-+
-+		dkey.KeyID = adev->wep_current_index;
-+		log(L_INIT, "setting WEP key %u as default\n", dkey.KeyID);
-+		acx_s_configure(adev, &dkey, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET);
-+#ifdef DEBUG_WEP
-+		keyindic.val = 3;
-+		acx_s_configure(adev, &keyindic, ACX111_IE_KEY_CHOOSE);
-+#endif
-+		start_scan = 1;
-+		CLEAR_BIT(adev->set_mask, GETSET_WEP);
-+	}
-+
-+	if (adev->set_mask & SET_WEP_OPTIONS) {
-+		acx100_ie_wep_options_t options;
-+		if (IS_ACX111(adev)) {
-+			log(L_DEBUG, "setting WEP Options for acx111 is not supported\n");
-+		} else {
-+			log(L_INIT, "setting WEP Options\n");
-+			acx100_s_init_wep(adev);
-+#if 0
-+			/* let's choose maximum setting: 4 default keys,
-+			 * plus 10 other keys: */
-+			options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10);
-+			/* don't decrypt default key only,
-+			 * don't override decryption: */
-+			options.WEPOption = 0;
-+			if (adev->mode == ACX_MODE_MONITOR) {
-+				/* don't decrypt default key only,
-+				 * override decryption mechanism: */
-+				options.WEPOption = 2;
-+			}
-+
-+			acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS);
-+#endif
-+		}
-+		CLEAR_BIT(adev->set_mask, SET_WEP_OPTIONS);
-+	}
-+
-+	/* Rescan was requested */
-+	if (start_scan) {
-+		switch (adev->mode) {
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_2_STA:
-+			/* We can avoid clearing list if join code
-+			** will be a bit more clever about not picking
-+			** 'bad' AP over and over again */
-+			acx_lock(adev, flags);
-+			adev->ap_client = NULL;
-+			acx_l_sta_list_init(adev);
-+			acx_set_status(adev, ACX_STATUS_1_SCANNING);
-+			acx_unlock(adev, flags);
-+
-+			acx_s_cmd_start_scan(adev);
-+		}
-+	}
-+
-+	/* debug, rate, and nick don't need any handling */
-+	/* what about sniffing mode?? */
-+
-+	log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X - after update\n",
-+			adev->get_mask, adev->set_mask);
-+
-+/* end: */
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_e_after_interrupt_task
-+*/
-+static int
-+acx_s_recalib_radio(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev)) {
-+		acx111_cmd_radiocalib_t cal;
-+
-+		printk("%s: recalibrating radio\n", adev->ndev->name);
-+		/* automatic recalibration, choose all methods: */
-+		cal.methods = cpu_to_le32(0x8000000f);
-+		/* automatic recalibration every 60 seconds (value in TUs)
-+		 * I wonder what the firmware default here is? */
-+		cal.interval = cpu_to_le32(58594);
-+		return acx_s_issue_cmd_timeo(adev, ACX111_CMD_RADIOCALIB,
-+			&cal, sizeof(cal), CMD_TIMEOUT_MS(100));
-+	} else {
-+		/* On ACX100, we need to recalibrate the radio
-+		 * by issuing a GETSET_TX|GETSET_RX */
-+		if (/* (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0)) &&
-+		    (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0)) && */
-+		    (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1)) &&
-+		    (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1)) )
-+			return OK;
-+		return NOT_OK;
-+	}
-+}
-+
-+static void
-+acx_s_after_interrupt_recalib(acx_device_t *adev)
-+{
-+	int res;
-+
-+	/* this helps with ACX100 at least;
-+	 * hopefully ACX111 also does a
-+	 * recalibration here */
-+
-+	/* clear flag beforehand, since we want to make sure
-+	 * it's cleared; then only set it again on specific circumstances */
-+	CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+
-+	/* better wait a bit between recalibrations to
-+	 * prevent overheating due to torturing the card
-+	 * into working too long despite high temperature
-+	 * (just a safety measure) */
-+	if (adev->recalib_time_last_success
-+	 && time_before(jiffies, adev->recalib_time_last_success
-+					+ RECALIB_PAUSE * 60 * HZ)) {
-+		if (adev->recalib_msg_ratelimit <= 4) {
-+			printk("%s: less than " STRING(RECALIB_PAUSE)
-+				" minutes since last radio recalibration, "
-+				"not recalibrating (maybe card is too hot?)\n",
-+				adev->ndev->name);
-+			adev->recalib_msg_ratelimit++;
-+			if (adev->recalib_msg_ratelimit == 5)
-+				printk("disabling above message until next recalib\n");
-+		}
-+		return;
-+	}
-+
-+	adev->recalib_msg_ratelimit = 0;
-+
-+	/* note that commands sometimes fail (card busy),
-+	 * so only clear flag if we were fully successful */
-+	res = acx_s_recalib_radio(adev);
-+	if (res == OK) {
-+		printk("%s: successfully recalibrated radio\n",
-+						adev->ndev->name);
-+		adev->recalib_time_last_success = jiffies;
-+		adev->recalib_failure_count = 0;
-+	} else {
-+		/* failed: resubmit, but only limited
-+		 * amount of times within some time range
-+		 * to prevent endless loop */
-+
-+		adev->recalib_time_last_success = 0; /* we failed */
-+
-+		/* if some time passed between last
-+		 * attempts, then reset failure retry counter
-+		 * to be able to do next recalib attempt */
-+		if (time_after(jiffies, adev->recalib_time_last_attempt + 5*HZ))
-+			adev->recalib_failure_count = 0;
-+
-+		if (adev->recalib_failure_count < 5) {
-+			/* increment inside only, for speedup of outside path */
-+			adev->recalib_failure_count++;
-+			adev->recalib_time_last_attempt = jiffies;
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+		}
-+	}
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
-+static void
-+acx_e_after_interrupt_task(struct work_struct *work)
-+{
-+	acx_device_t *adev = container_of(work, acx_device_t, after_interrupt_task);
-+#else
-+  static void
-+  acx_e_after_interrupt_task(void *data)
-+  {
-+  	struct net_device *ndev = (struct net_device*)data;
-+  	acx_device_t *adev = ndev2adev(ndev);
-+#endif
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	if (!adev->after_interrupt_jobs)
-+		goto end; /* no jobs to do */
-+
-+#if TX_CLEANUP_IN_SOFTIRQ
-+	/* can happen only on PCI */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_TX_CLEANUP) {
-+		acx_lock(adev, flags);
-+		acxpci_l_clean_txdesc(adev);
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_TX_CLEANUP);
-+		acx_unlock(adev, flags);
-+	}
-+#endif
-+	/* we see lotsa tx errors */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_RADIO_RECALIB) {
-+		acx_s_after_interrupt_recalib(adev);
-+	}
-+
-+	/* a poor interrupt code wanted to do update_card_settings() */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_UPDATE_CARD_CFG) {
-+		if (ACX_STATE_IFACE_UP & adev->dev_state_mask)
-+			acx_s_update_card_settings(adev);
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+	}
-+
-+	/* 1) we detected that no Scan_Complete IRQ came from fw, or
-+	** 2) we found too many STAs */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_STOP_SCAN) {
-+		log(L_IRQ, "sending a stop scan cmd...\n");
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_STOP_SCAN, NULL, 0);
-+		/* HACK: set the IRQ bit, since we won't get a
-+		 * scan complete IRQ any more on ACX111 (works on ACX100!),
-+		 * since _we_, not a fw, have stopped the scan */
-+		SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_STOP_SCAN);
-+	}
-+
-+	/* either fw sent Scan_Complete or we detected that
-+	** no Scan_Complete IRQ came from fw. Finish scanning,
-+	** pick join partner if any */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_COMPLETE_SCAN) {
-+		if (adev->status == ACX_STATUS_1_SCANNING) {
-+			if (OK != acx_s_complete_scan(adev)) {
-+				SET_BIT(adev->after_interrupt_jobs,
-+					ACX_AFTER_IRQ_RESTART_SCAN);
-+			}
-+		} else {
-+			/* + scan kills current join status - restore it
-+			**   (do we need it for STA?) */
-+			/* + does it happen only with active scans?
-+			**   active and passive scans? ALL scans including
-+			**   background one? */
-+			/* + was not verified that everything is restored
-+			**   (but at least we start to emit beacons again) */
-+			switch (adev->mode) {
-+			case ACX_MODE_0_ADHOC:
-+			case ACX_MODE_3_AP:
-+				log(L_IRQ, "redoing cmd_join_bssid() after scan\n");
-+				acx_s_cmd_join_bssid(adev, adev->bssid);
-+			}
-+		}
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_COMPLETE_SCAN);
-+	}
-+
-+	/* STA auth or assoc timed out, start over again */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_RESTART_SCAN) {
-+		log(L_IRQ, "sending a start_scan cmd...\n");
-+		acx_s_cmd_start_scan(adev);
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_RESTART_SCAN);
-+	}
-+
-+	/* whee, we got positive assoc response! 8) */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_ASSOCIATE) {
-+		acx_ie_generic_t pdr;
-+		/* tiny race window exists, checking that we still a STA */
-+		switch (adev->mode) {
-+		case ACX_MODE_2_STA:
-+			pdr.m.aid = cpu_to_le16(adev->aid);
-+			acx_s_configure(adev, &pdr, ACX1xx_IE_ASSOC_ID);
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+			log(L_ASSOC|L_DEBUG, "ASSOCIATED!\n");
-+			CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_ASSOCIATE);
-+		}
-+	}
-+end:
-+	acx_sem_unlock(adev);
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_schedule_task
-+**
-+** Schedule the call of the after_interrupt method after leaving
-+** the interrupt context.
-+*/
-+void
-+acx_schedule_task(acx_device_t *adev, unsigned int set_flag)
-+{
-+	SET_BIT(adev->after_interrupt_jobs, set_flag);
-+	SCHEDULE_WORK(&adev->after_interrupt_task);
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acx_init_task_scheduler(acx_device_t *adev)
-+{
-+	/* configure task scheduler */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
-+	INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task);
-+#else
-+	INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task,
-+			adev->ndev);
-+#endif
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_start
-+*/
-+void
-+acx_s_start(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+
-+	/*
-+	 * Ok, now we do everything that can possibly be done with ioctl
-+	 * calls to make sure that when it was called before the card
-+	 * was up we get the changes asked for
-+	 */
-+
-+	SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST|GETSET_WEP
-+		|GETSET_TXPOWER|GETSET_ANTENNA|GETSET_ED_THRESH|GETSET_CCA
-+		|GETSET_REG_DOMAIN|GETSET_MODE|GETSET_CHANNEL
-+		|GETSET_TX|GETSET_RX|GETSET_STATION_ID);
-+
-+	log(L_INIT, "updating initial settings on iface activation\n");
-+	acx_s_update_card_settings(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_update_capabilities
-+*/
-+void
-+acx_update_capabilities(acx_device_t *adev)
-+{
-+	u16 cap = 0;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_3_AP:
-+		SET_BIT(cap, WF_MGMT_CAP_ESS); break;
-+	case ACX_MODE_0_ADHOC:
-+		SET_BIT(cap, WF_MGMT_CAP_IBSS); break;
-+	/* other types of stations do not emit beacons */
-+	}
-+
-+	if (adev->wep_restricted) {
-+		SET_BIT(cap, WF_MGMT_CAP_PRIVACY);
-+	}
-+	if (adev->cfgopt_dot11ShortPreambleOption) {
-+		SET_BIT(cap, WF_MGMT_CAP_SHORT);
-+	}
-+	if (adev->cfgopt_dot11PBCCOption) {
-+		SET_BIT(cap, WF_MGMT_CAP_PBCC);
-+	}
-+	if (adev->cfgopt_dot11ChannelAgility) {
-+		SET_BIT(cap, WF_MGMT_CAP_AGILITY);
-+	}
-+	log(L_DEBUG, "caps updated from 0x%04X to 0x%04X\n",
-+				adev->capabilities, cap);
-+	adev->capabilities = cap;
-+}
-+
-+/***********************************************************************
-+** Common function to parse ALL configoption struct formats
-+** (ACX100 and ACX111; FIXME: how to make it work with ACX100 USB!?!?).
-+** FIXME: logging should be removed here and added to a /proc file instead
-+*/
-+void
-+acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg)
-+{
-+	const u8 *pEle;
-+	int i;
-+	int is_acx111 = IS_ACX111(adev);
-+
-+	if (acx_debug & L_DEBUG) {
-+		printk("configoption struct content:\n");
-+		acx_dump_bytes(pcfg, sizeof(*pcfg));
-+	}
-+
-+	if (( is_acx111 && (adev->eeprom_version == 5))
-+	||  (!is_acx111 && (adev->eeprom_version == 4))
-+	||  (!is_acx111 && (adev->eeprom_version == 5))) {
-+		/* these versions are known to be supported */
-+	} else {
-+		printk("unknown chip and EEPROM version combination (%s, v%d), "
-+			"don't know how to parse config options yet. "
-+			"Please report\n", is_acx111 ? "ACX111" : "ACX100",
-+			adev->eeprom_version);
-+		return;
-+	}
-+
-+	/* first custom-parse the first part which has chip-specific layout */
-+
-+	pEle = (const u8 *) pcfg;
-+
-+	pEle += 4; /* skip (type,len) header */
-+
-+	memcpy(adev->cfgopt_NVSv, pEle, sizeof(adev->cfgopt_NVSv));
-+	pEle += sizeof(adev->cfgopt_NVSv);
-+
-+	if (is_acx111) {
-+		adev->cfgopt_NVS_vendor_offs = le16_to_cpu(*(u16 *)pEle);
-+		pEle += sizeof(adev->cfgopt_NVS_vendor_offs);
-+
-+		adev->cfgopt_probe_delay = 200; /* good default value? */
-+		pEle += 2; /* FIXME: unknown, value 0x0001 */
-+	} else {
-+		memcpy(adev->cfgopt_MAC, pEle, sizeof(adev->cfgopt_MAC));
-+		pEle += sizeof(adev->cfgopt_MAC);
-+
-+		adev->cfgopt_probe_delay = le16_to_cpu(*(u16 *)pEle);
-+		pEle += sizeof(adev->cfgopt_probe_delay);
-+		if ((adev->cfgopt_probe_delay < 100) || (adev->cfgopt_probe_delay > 500)) {
-+			printk("strange probe_delay value %d, "
-+				"tweaking to 200\n", adev->cfgopt_probe_delay);
-+			adev->cfgopt_probe_delay = 200;
-+		}
-+	}
-+
-+	adev->cfgopt_eof_memory = le32_to_cpu(*(u32 *)pEle);
-+	pEle += sizeof(adev->cfgopt_eof_memory);
-+
-+	printk("NVS_vendor_offs:%04X probe_delay:%d eof_memory:%d\n",
-+		adev->cfgopt_NVS_vendor_offs,
-+		adev->cfgopt_probe_delay,
-+		adev->cfgopt_eof_memory);
-+
-+	adev->cfgopt_dot11CCAModes = *pEle++;
-+	adev->cfgopt_dot11Diversity = *pEle++;
-+	adev->cfgopt_dot11ShortPreambleOption = *pEle++;
-+	adev->cfgopt_dot11PBCCOption = *pEle++;
-+	adev->cfgopt_dot11ChannelAgility = *pEle++;
-+	adev->cfgopt_dot11PhyType = *pEle++;
-+	adev->cfgopt_dot11TempType = *pEle++;
-+	printk("CCAModes:%02X Diversity:%02X ShortPreOpt:%02X "
-+		"PBCC:%02X ChanAgil:%02X PHY:%02X Temp:%02X\n",
-+		adev->cfgopt_dot11CCAModes,
-+		adev->cfgopt_dot11Diversity,
-+		adev->cfgopt_dot11ShortPreambleOption,
-+		adev->cfgopt_dot11PBCCOption,
-+		adev->cfgopt_dot11ChannelAgility,
-+		adev->cfgopt_dot11PhyType,
-+		adev->cfgopt_dot11TempType);
-+
-+	/* then use common parsing for next part which has common layout */
-+
-+	pEle++; /* skip table_count (6) */
-+
-+	if (IS_MEM(adev) && IS_ACX100(adev))
-+	{
-+	/*
-+	   * For iPaq hx4700 Generic Slave F/W 1.10.7.K.  I'm not sure if these
-+	   * 4 extra bytes are before the dot11 things above or after, so I'm just
-+	   * going to guess after.  If someone sees these aren't reasonable numbers,
-+	   * please fix this.
-+	 * The area from which the dot11 values above are read contains:
-+	 * 04 01 01 01 00 05 01 06 00 02 01 02
-+	 * the 8 dot11 reads above take care of 8 of them, but which 8...
-+	 */
-+	pEle += 4;
-+	}
-+
-+	adev->cfgopt_antennas.type = pEle[0];
-+	adev->cfgopt_antennas.len = pEle[1];
-+	printk("AntennaID:%02X Len:%02X Data:",
-+			adev->cfgopt_antennas.type, adev->cfgopt_antennas.len);
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_antennas.list[i] = pEle[i+2];
-+		printk("%02X ", pEle[i+2]);
-+	}
-+	printk("\n");
-+
-+	pEle += pEle[1] + 2;
-+	adev->cfgopt_power_levels.type = pEle[0];
-+	adev->cfgopt_power_levels.len = pEle[1];
-+	printk("PowerLevelID:%02X Len:%02X Data:",
-+		adev->cfgopt_power_levels.type, adev->cfgopt_power_levels.len);
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_power_levels.list[i] = le16_to_cpu(*(u16 *)&pEle[i*2+2]);
-+		printk("%04X ", adev->cfgopt_power_levels.list[i]);
-+	}
-+	printk("\n");
-+
-+	pEle += pEle[1]*2 + 2;
-+	adev->cfgopt_data_rates.type = pEle[0];
-+	adev->cfgopt_data_rates.len = pEle[1];
-+	printk("DataRatesID:%02X Len:%02X Data:",
-+		adev->cfgopt_data_rates.type, adev->cfgopt_data_rates.len);
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_data_rates.list[i] = pEle[i+2];
-+		printk("%02X ", pEle[i+2]);
-+	}
-+	printk("\n");
-+
-+	pEle += pEle[1] + 2;
-+	adev->cfgopt_domains.type = pEle[0];
-+	adev->cfgopt_domains.len = pEle[1];
-+	if (IS_MEM(adev) && IS_ACX100(adev))
-+	{
-+	/*
-+	   * For iPaq hx4700 Generic Slave F/W 1.10.7.K.
-+	 * There's an extra byte between this structure and the next
-+	 * that is not accounted for with this structure's length.  It's
-+	 * most likely a bug in the firmware, but we can fix it here
-+	 * by bumping the length of this field by 1.
-+	 */
-+	adev->cfgopt_domains.len++;
-+	}
-+	printk("DomainID:%02X Len:%02X Data:",
-+			adev->cfgopt_domains.type, adev->cfgopt_domains.len);
-+	for (i = 0; i < adev->cfgopt_domains.len; i++) {
-+		adev->cfgopt_domains.list[i] = pEle[i+2];
-+		printk("%02X ", pEle[i+2]);
-+	}
-+	printk("\n");
-+
-+	pEle += adev->cfgopt_domains.len + 2;
-+
-+	adev->cfgopt_product_id.type = pEle[0];
-+	adev->cfgopt_product_id.len = pEle[1];
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_product_id.list[i] = pEle[i+2];
-+	}
-+	printk("ProductID:%02X Len:%02X Data:%.*s\n",
-+		adev->cfgopt_product_id.type, adev->cfgopt_product_id.len,
-+		adev->cfgopt_product_id.len, (char *)adev->cfgopt_product_id.list);
-+
-+	pEle += pEle[1] + 2;
-+	adev->cfgopt_manufacturer.type = pEle[0];
-+	adev->cfgopt_manufacturer.len = pEle[1];
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_manufacturer.list[i] = pEle[i+2];
-+	}
-+	printk("ManufacturerID:%02X Len:%02X Data:%.*s\n",
-+		adev->cfgopt_manufacturer.type, adev->cfgopt_manufacturer.len,
-+		adev->cfgopt_manufacturer.len, (char *)adev->cfgopt_manufacturer.list);
-+/*
-+	printk("EEPROM part:\n");
-+	for (i=0; i<58; i++) {
-+		printk("%02X =======>  0x%02X\n",
-+			i, (u8 *)adev->cfgopt_NVSv[i-2]);
-+	}
-+*/
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int __init
-+acx_e_init_module(void)
-+{
-+	int r1,r2,r3,r4;
-+
-+	acx_struct_size_check();
-+
-+	printk("acx: this driver is still EXPERIMENTAL\n"
-+		"acx: reading README file and/or Craig's HOWTO is "
-+		"recommended, visit http://acx100.sf.net in case "
-+		"of further questions/discussion\n");
-+
-+#if defined(CONFIG_ACX_PCI)
-+	r1 = acxpci_e_init_module();
-+#else
-+	r1 = -EINVAL;
-+#endif
-+#if defined(CONFIG_ACX_MEM)
-+	r2 = acxmem_e_init_module();
-+#else
-+	r2 = -EINVAL;
-+#endif
-+#if defined(CONFIG_ACX_USB)
-+	r3 = acxusb_e_init_module();
-+#else
-+	r3 = -EINVAL;
-+#endif
-+#if defined(CONFIG_ACX_CS)
-+	r4 = acx_cs_init();
-+#else
-+	r4 = -EINVAL;
-+#endif
-+	if (r2 && r1  && r3 && r4) { /* all failed! */
-+	  if (r3 || r1)
-+		return r3 ? r3 : r1;
-+	  else
-+	    return r2;
-+	}
-+	/* return success if at least one succeeded */
-+	return 0;
-+
-+}
-+
-+static void __exit
-+acx_e_cleanup_module(void)
-+{
-+#if defined(CONFIG_ACX_PCI)
-+	acxpci_e_cleanup_module();
-+#endif
-+#if defined(CONFIG_ACX_MEM)
-+	acxmem_e_cleanup_module();
-+#endif
-+#if defined(CONFIG_ACX_USB)
-+	acxusb_e_cleanup_module();
-+#endif
-+#if defined(CONFIG_ACX_CS)
-+	acx_cs_cleanup();
-+#endif
-+}
-+
-+module_init(acx_e_init_module)
-+module_exit(acx_e_cleanup_module)
-Index: linux-2.6.23/drivers/net/wireless/acx/conv.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/conv.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,504 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/skbuff.h>
-+#include <linux/if_arp.h>
-+#include <linux/etherdevice.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+** proto_is_stt
-+**
-+** Searches the 802.1h Selective Translation Table for a given
-+** protocol.
-+**
-+** prottype - protocol number (in host order) to search for.
-+**
-+** Returns:
-+**	1 - if the table is empty or a match is found.
-+**	0 - if the table is non-empty and a match is not found.
-+**
-+** Based largely on p80211conv.c of the linux-wlan-ng project
-+*/
-+static inline int
-+proto_is_stt(unsigned int proto)
-+{
-+	/* Always return found for now.  This is the behavior used by the */
-+	/* Zoom Win95 driver when 802.1h mode is selected */
-+	/* TODO: If necessary, add an actual search we'll probably
-+		 need this to match the CMAC's way of doing things.
-+		 Need to do some testing to confirm.
-+	*/
-+
-+	if (proto == 0x80f3)  /* APPLETALK */
-+		return 1;
-+
-+	return 0;
-+/*	return ((prottype == ETH_P_AARP) || (prottype == ETH_P_IPX)); */
-+}
-+
-+/* Helpers */
-+
-+static inline void
-+store_llc_snap(struct wlan_llc *llc)
-+{
-+	llc->dsap = 0xaa;	/* SNAP, see IEEE 802 */
-+	llc->ssap = 0xaa;
-+	llc->ctl = 0x03;
-+}
-+static inline int
-+llc_is_snap(const struct wlan_llc *llc)
-+{
-+	return (llc->dsap == 0xaa)
-+	&& (llc->ssap == 0xaa)
-+	&& (llc->ctl == 0x03);
-+}
-+static inline void
-+store_oui_rfc1042(struct wlan_snap *snap)
-+{
-+	snap->oui[0] = 0;
-+	snap->oui[1] = 0;
-+	snap->oui[2] = 0;
-+}
-+static inline int
-+oui_is_rfc1042(const struct wlan_snap *snap)
-+{
-+	return (snap->oui[0] == 0)
-+	&& (snap->oui[1] == 0)
-+	&& (snap->oui[2] == 0);
-+}
-+static inline void
-+store_oui_8021h(struct wlan_snap *snap)
-+{
-+	snap->oui[0] = 0;
-+	snap->oui[1] = 0;
-+	snap->oui[2] = 0xf8;
-+}
-+static inline int
-+oui_is_8021h(const struct wlan_snap *snap)
-+{
-+	return (snap->oui[0] == 0)
-+	&& (snap->oui[1] == 0)
-+	&& (snap->oui[2] == 0xf8);
-+}
-+
-+
-+/***********************************************************************
-+** acx_ether_to_txbuf
-+**
-+** Uses the contents of the ether frame to build the elements of
-+** the 802.11 frame.
-+**
-+** We don't actually set up the frame header here.  That's the
-+** MAC's job.  We're only handling conversion of DIXII or 802.3+LLC
-+** frames to something that works with 802.11.
-+**
-+** Based largely on p80211conv.c of the linux-wlan-ng project
-+*/
-+int
-+acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb)
-+{
-+	struct wlan_hdr_a3 *w_hdr;
-+	struct wlan_ethhdr *e_hdr;
-+	struct wlan_llc *e_llc;
-+	struct wlan_snap *e_snap;
-+	const u8 *a1, *a3;
-+	int header_len, payload_len = -1;
-+	/* protocol type or data length, depending on whether
-+	 * DIX or 802.3 ethernet format */
-+	u16 proto;
-+	u16 fc;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!skb->len)) {
-+		log(L_DEBUG, "zero-length skb!\n");
-+		goto end;
-+	}
-+
-+	w_hdr = (struct wlan_hdr_a3*)txbuf;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_MONITOR:
-+		/* NB: one day we might want to play with DESC_CTL2_FCS
-+		** Will need to stop doing "- WLAN_FCS_LEN" here then */
-+		if (unlikely(skb->len >= WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_FCS_LEN)) {
-+			printk("%s: can't tx oversized frame (%d bytes)\n",
-+				adev->ndev->name, skb->len);
-+			goto end;
-+		}
-+		memcpy(w_hdr, skb->data, skb->len);
-+		payload_len = skb->len;
-+		goto end;
-+	}
-+
-+	/* step 1: classify ether frame, DIX or 802.3? */
-+	e_hdr = (wlan_ethhdr_t *)skb->data;
-+	proto = ntohs(e_hdr->type);
-+	if (proto <= 1500) {
-+		log(L_DEBUG, "tx: 802.3 len: %d\n", skb->len);
-+		/* codes <= 1500 reserved for 802.3 lengths */
-+		/* it's 802.3, pass ether payload unchanged, */
-+		/* trim off ethernet header and copy payload to txdesc */
-+		header_len = WLAN_HDR_A3_LEN;
-+	} else {
-+		/* it's DIXII, time for some conversion */
-+		/* Create 802.11 packet. Header also contains llc and snap. */
-+
-+		log(L_DEBUG, "tx: DIXII len: %d\n", skb->len);
-+
-+		/* size of header is 802.11 header + llc + snap */
-+		header_len = WLAN_HDR_A3_LEN + sizeof(wlan_llc_t) + sizeof(wlan_snap_t);
-+		/* llc is located behind the 802.11 header */
-+		e_llc = (wlan_llc_t*)(w_hdr + 1);
-+		/* snap is located behind the llc */
-+		e_snap = (wlan_snap_t*)(e_llc + 1);
-+
-+		/* setup the LLC header */
-+		store_llc_snap(e_llc);
-+
-+		/* setup the SNAP header */
-+		e_snap->type = htons(proto);
-+		if (proto_is_stt(proto)) {
-+			store_oui_8021h(e_snap);
-+		} else {
-+			store_oui_rfc1042(e_snap);
-+		}
-+	}
-+	/* trim off ethernet header and copy payload to txbuf */
-+	payload_len = skb->len - sizeof(wlan_ethhdr_t);
-+	/* TODO: can we just let acx DMA payload from skb instead? */
-+	memcpy((u8*)txbuf + header_len, skb->data + sizeof(wlan_ethhdr_t), payload_len);
-+	payload_len += header_len;
-+
-+	/* Set up the 802.11 header */
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+		fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi);
-+		a1 = e_hdr->daddr;
-+		a3 = adev->bssid;
-+		break;
-+	case ACX_MODE_2_STA:
-+		fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_TODSi);
-+		a1 = adev->bssid;
-+		a3 = e_hdr->daddr;
-+		break;
-+	case ACX_MODE_3_AP:
-+		fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_FROMDSi);
-+		a1 = e_hdr->daddr;
-+		a3 = e_hdr->saddr;
-+		break;
-+	default:
-+		printk("%s: error - converting eth to wlan in unknown mode\n",
-+				adev->ndev->name);
-+		payload_len = -1;
-+		goto end;
-+	}
-+	if (adev->wep_enabled)
-+		SET_BIT(fc, WF_FC_ISWEPi);
-+
-+	w_hdr->fc = fc;
-+	w_hdr->dur = 0;
-+	MAC_COPY(w_hdr->a1, a1);
-+	MAC_COPY(w_hdr->a2, adev->dev_addr);
-+	MAC_COPY(w_hdr->a3, a3);
-+	w_hdr->seq = 0;
-+
-+#ifdef DEBUG_CONVERT
-+	if (acx_debug & L_DATA) {
-+		printk("original eth frame [%d]: ", skb->len);
-+		acx_dump_bytes(skb->data, skb->len);
-+		printk("802.11 frame [%d]: ", payload_len);
-+		acx_dump_bytes(w_hdr, payload_len);
-+	}
-+#endif
-+
-+end:
-+	FN_EXIT1(payload_len);
-+	return payload_len;
-+}
-+
-+
-+/***********************************************************************
-+** acx_rxbuf_to_ether
-+**
-+** Uses the contents of a received 802.11 frame to build an ether
-+** frame.
-+**
-+** This function extracts the src and dest address from the 802.11
-+** frame to use in the construction of the eth frame.
-+**
-+** Based largely on p80211conv.c of the linux-wlan-ng project
-+*/
-+struct sk_buff*
-+acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	struct wlan_hdr *w_hdr;
-+	struct wlan_ethhdr *e_hdr;
-+	struct wlan_llc *e_llc;
-+	struct wlan_snap *e_snap;
-+	struct sk_buff *skb;
-+	const u8 *daddr;
-+	const u8 *saddr;
-+	const u8 *e_payload;
-+	int buflen, payload_length;
-+	unsigned int payload_offset, mtu;
-+	u16 fc;
-+
-+	FN_ENTER;
-+
-+	/* This looks complex because it must handle possible
-+	** phy header in rxbuff */
-+	w_hdr = acx_get_wlan_hdr(adev, rxbuf);
-+	payload_offset = WLAN_HDR_A3_LEN; /* it is relative to w_hdr */
-+	payload_length = RXBUF_BYTES_USED(rxbuf) /* entire rxbuff... */
-+		- ((u8*)w_hdr - (u8*)rxbuf) /* minus space before 802.11 frame */
-+		- WLAN_HDR_A3_LEN; /* minus 802.11 header */
-+
-+	/* setup some vars for convenience */
-+	fc = w_hdr->fc;
-+	switch (WF_FC_FROMTODSi & fc) {
-+	case 0:
-+		daddr = w_hdr->a1;
-+		saddr = w_hdr->a2;
-+		break;
-+	case WF_FC_FROMDSi:
-+		daddr = w_hdr->a1;
-+		saddr = w_hdr->a3;
-+		break;
-+	case WF_FC_TODSi:
-+		daddr = w_hdr->a3;
-+		saddr = w_hdr->a2;
-+		break;
-+	default: /* WF_FC_FROMTODSi */
-+		payload_offset += (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN);
-+		payload_length -= (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN);
-+		daddr = w_hdr->a3;
-+		saddr = w_hdr->a4;
-+	}
-+
-+	if ((WF_FC_ISWEPi & fc) && IS_ACX100(adev)) {
-+		/* chop off the IV+ICV WEP header and footer */
-+		log(L_DATA|L_DEBUG, "rx: WEP packet, "
-+			"chopping off IV and ICV\n");
-+		payload_offset += WLAN_WEP_IV_LEN;
-+		payload_length -= WLAN_WEP_IV_LEN + WLAN_WEP_ICV_LEN;
-+	}
-+
-+	if (unlikely(payload_length < 0)) {
-+		printk("%s: rx frame too short, ignored\n", adev->ndev->name);
-+		goto ret_null;
-+	}
-+
-+	e_hdr = (wlan_ethhdr_t*) ((u8*) w_hdr + payload_offset);
-+	e_llc = (wlan_llc_t*) e_hdr;
-+	e_snap = (wlan_snap_t*) (e_llc + 1);
-+	mtu = adev->ndev->mtu;
-+	e_payload = (u8*) (e_snap + 1);
-+
-+	log(L_DATA, "rx: payload_offset %d, payload_length %d\n",
-+		payload_offset, payload_length);
-+	log(L_XFER|L_DATA,
-+		"rx: frame info: llc=%02X%02X%02X "
-+		"snap.oui=%02X%02X%02X snap.type=%04X\n",
-+		e_llc->dsap, e_llc->ssap, e_llc->ctl,
-+		e_snap->oui[0],	e_snap->oui[1], e_snap->oui[2],
-+		ntohs(e_snap->type));
-+
-+	/* Test for the various encodings */
-+	if ((payload_length >= sizeof(wlan_ethhdr_t))
-+	 && ((e_llc->dsap != 0xaa) || (e_llc->ssap != 0xaa))
-+	 && (   (mac_is_equal(daddr, e_hdr->daddr))
-+	     || (mac_is_equal(saddr, e_hdr->saddr))
-+	    )
-+	) {
-+	/* 802.3 Encapsulated: */
-+	/* wlan frame body contains complete eth frame (header+body) */
-+		log(L_DEBUG|L_DATA, "rx: 802.3 ENCAP len=%d\n", payload_length);
-+
-+		if (unlikely(payload_length > (mtu + ETH_HLEN))) {
-+			printk("%s: rx: ENCAP frame too large (%d > %d)\n",
-+				adev->ndev->name,
-+				payload_length, mtu + ETH_HLEN);
-+			goto ret_null;
-+		}
-+
-+		/* allocate space and setup host buffer */
-+		buflen = payload_length;
-+		/* Attempt to align IP header (14 bytes eth header + 2 = 16) */
-+		skb = dev_alloc_skb(buflen + 2);
-+		if (unlikely(!skb))
-+			goto no_skb;
-+		skb_reserve(skb, 2);
-+		skb_put(skb, buflen);		/* make room */
-+
-+		/* now copy the data from the 80211 frame */
-+		memcpy(skb->data, e_hdr, payload_length);
-+
-+	} else if ( (payload_length >= sizeof(wlan_llc_t)+sizeof(wlan_snap_t))
-+		 && llc_is_snap(e_llc) ) {
-+	/* wlan frame body contains: AA AA 03 ... (it's a SNAP) */
-+
-+		if ( !oui_is_rfc1042(e_snap)
-+		 || (proto_is_stt(ieee2host16(e_snap->type)) /* && (ethconv == WLAN_ETHCONV_8021h) */)) {
-+			log(L_DEBUG|L_DATA, "rx: SNAP+RFC1042 len=%d\n", payload_length);
-+	/* wlan frame body contains: AA AA 03 !(00 00 00) ... -or- */
-+	/* wlan frame body contains: AA AA 03 00 00 00 0x80f3 ... */
-+	/* build eth hdr, type = len, copy AA AA 03... as eth body */
-+			/* it's a SNAP + RFC1042 frame && protocol is in STT */
-+
-+			if (unlikely(payload_length > mtu)) {
-+				printk("%s: rx: SNAP frame too large (%d > %d)\n",
-+					adev->ndev->name,
-+					payload_length, mtu);
-+				goto ret_null;
-+			}
-+
-+			/* allocate space and setup host buffer */
-+			buflen = payload_length + ETH_HLEN;
-+			skb = dev_alloc_skb(buflen + 2);
-+			if (unlikely(!skb))
-+				goto no_skb;
-+			skb_reserve(skb, 2);
-+			skb_put(skb, buflen);		/* make room */
-+
-+			/* create 802.3 header */
-+			e_hdr = (wlan_ethhdr_t*) skb->data;
-+			MAC_COPY(e_hdr->daddr, daddr);
-+			MAC_COPY(e_hdr->saddr, saddr);
-+			e_hdr->type = htons(payload_length);
-+
-+			/* Now copy the data from the 80211 frame.
-+			   Make room in front for the eth header, and keep the
-+			   llc and snap from the 802.11 payload */
-+			memcpy(skb->data + ETH_HLEN,
-+					e_llc, payload_length);
-+
-+		} else {
-+	/* wlan frame body contains: AA AA 03 00 00 00 [type] [tail] */
-+	/* build eth hdr, type=[type], copy [tail] as eth body */
-+			log(L_DEBUG|L_DATA, "rx: 802.1h/RFC1042 len=%d\n",
-+				payload_length);
-+			/* it's an 802.1h frame (an RFC1042 && protocol is not in STT) */
-+			/* build a DIXII + RFC894 */
-+
-+			payload_length -= sizeof(wlan_llc_t) + sizeof(wlan_snap_t);
-+			if (unlikely(payload_length > mtu)) {
-+				printk("%s: rx: DIXII frame too large (%d > %d)\n",
-+					adev->ndev->name,
-+					payload_length,	mtu);
-+				goto ret_null;
-+			}
-+
-+			/* allocate space and setup host buffer */
-+			buflen = payload_length + ETH_HLEN;
-+			skb = dev_alloc_skb(buflen + 2);
-+			if (unlikely(!skb))
-+				goto no_skb;
-+			skb_reserve(skb, 2);
-+			skb_put(skb, buflen);		/* make room */
-+
-+			/* create 802.3 header */
-+			e_hdr = (wlan_ethhdr_t *) skb->data;
-+			MAC_COPY(e_hdr->daddr, daddr);
-+			MAC_COPY(e_hdr->saddr, saddr);
-+			e_hdr->type = e_snap->type;
-+
-+			/* Now copy the data from the 80211 frame.
-+			   Make room in front for the eth header, and cut off the
-+			   llc and snap from the 802.11 payload */
-+			memcpy(skb->data + ETH_HLEN,
-+					e_payload, payload_length);
-+		}
-+
-+	} else {
-+		log(L_DEBUG|L_DATA, "rx: NON-ENCAP len=%d\n", payload_length);
-+	/* build eth hdr, type=len, copy wlan body as eth body */
-+		/* any NON-ENCAP */
-+		/* it's a generic 80211+LLC or IPX 'Raw 802.3' */
-+		/* build an 802.3 frame */
-+
-+		if (unlikely(payload_length > mtu)) {
-+			printk("%s: rx: OTHER frame too large (%d > %d)\n",
-+				adev->ndev->name, payload_length, mtu);
-+			goto ret_null;
-+		}
-+
-+		/* allocate space and setup host buffer */
-+		buflen = payload_length + ETH_HLEN;
-+		skb = dev_alloc_skb(buflen + 2);
-+		if (unlikely(!skb))
-+			goto no_skb;
-+		skb_reserve(skb, 2);
-+		skb_put(skb, buflen);		/* make room */
-+
-+		/* set up the 802.3 header */
-+		e_hdr = (wlan_ethhdr_t *) skb->data;
-+		MAC_COPY(e_hdr->daddr, daddr);
-+		MAC_COPY(e_hdr->saddr, saddr);
-+		e_hdr->type = htons(payload_length);
-+
-+		/* now copy the data from the 80211 frame */
-+		memcpy(skb->data + ETH_HLEN, e_llc, payload_length);
-+	}
-+
-+	skb->dev = adev->ndev;
-+	skb->protocol = eth_type_trans(skb, adev->ndev);
-+
-+#ifdef DEBUG_CONVERT
-+	if (acx_debug & L_DATA) {
-+		int len = RXBUF_BYTES_RCVD(adev, rxbuf);
-+		printk("p802.11 frame [%d]: ", len);
-+		acx_dump_bytes(w_hdr, len);
-+		printk("eth frame [%d]: ", skb->len);
-+		acx_dump_bytes(skb->data, skb->len);
-+	}
-+#endif
-+
-+	FN_EXIT0;
-+	return skb;
-+
-+no_skb:
-+	printk("%s: rx: no memory for skb (%d bytes)\n",
-+			adev->ndev->name, buflen + 2);
-+ret_null:
-+	FN_EXIT1((int)NULL);
-+	return NULL;
-+}
-Index: linux-2.6.23/drivers/net/wireless/acx/cs.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/cs.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,5703 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+**
-+** Slave memory interface support:
-+**
-+** Todd Blumer - SDG Systems
-+** Bill Reese - HP
-+** Eric McCorkle - Shadowsun
-+**
-+** CF support, (c) Fabrice Crohas, Paul Sokolovsky
-+*/
-+#define ACX_MEM 1
-+
-+/*
-+ * non-zero makes it dump the ACX memory to the console then
-+ * panic when you cat /proc/driver/acx_wlan0_diag
-+ */
-+#define DUMP_MEM_DEFINED 1
-+
-+#define DUMP_MEM_DURING_DIAG 0
-+#define DUMP_IF_SLOW 0
-+
-+#define PATCH_AROUND_BAD_SPOTS 1
-+#define HX4700_FIRMWARE_CHECKSUM 0x0036862e
-+#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+
-+/* Linux 2.6.18+ uses <linux/utsrelease.h> */
-+#ifndef UTS_RELEASE
-+#include <linux/utsrelease.h>
-+#endif
-+
-+#include <linux/compiler.h> /* required for Lx 2.6.8 ?? */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/skbuff.h>
-+#include <linux/slab.h>
-+#include <linux/if_arp.h>
-+#include <linux/irq.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+#include <linux/netdevice.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm.h>
-+#include <linux/vmalloc.h>
-+#include <linux/delay.h>
-+#include <linux/workqueue.h>
-+#include <linux/inetdevice.h>
-+
-+#define PCMCIA_DEBUG 1
-+
-+/*
-+   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-+   you do not define PCMCIA_DEBUG at all, all the debug code will be
-+   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-+   be present but disabled -- but it can then be enabled for specific
-+   modules at load time with a 'pc_debug=#' option to insmod.
-+	
-+*/
-+#include <pcmcia/cs_types.h>
-+#include <pcmcia/cs.h>
-+#include <pcmcia/cistpl.h>
-+#include <pcmcia/cisreg.h>
-+#include <pcmcia/ds.h>
-+#include "acx.h"
-+#include "acx_hw.h"
-+
-+#ifdef PCMCIA_DEBUG
-+static int pc_debug = PCMCIA_DEBUG;
-+module_param(pc_debug, int, 0);
-+static char *version = "$Revision: 1.10 $";
-+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-+#else
-+#define DEBUG(n, args...)
-+#endif
-+
-+
-+static win_req_t memwin;
-+
-+typedef struct local_info_t {
-+        dev_node_t      node;
-+        struct net_device *ndev;
-+} local_info_t;
-+
-+static struct net_device *resume_ndev;
-+
-+
-+/***********************************************************************
-+*/
-+
-+#define CARD_EEPROM_ID_SIZE 6
-+
-+#include <asm/io.h>
-+
-+#define REG_ACX_VENDOR_ID 0x900
-+/*
-+ * This is the vendor id on the HX4700, anyway
-+ */
-+#define ACX_VENDOR_ID 0x8400104c
-+
-+typedef enum {
-+	ACX_SOFT_RESET = 0,
-+
-+	ACX_SLV_REG_ADDR,
-+	ACX_SLV_REG_DATA,
-+	ACX_SLV_REG_ADATA,
-+
-+	ACX_SLV_MEM_CP,
-+	ACX_SLV_MEM_ADDR,
-+	ACX_SLV_MEM_DATA,
-+	ACX_SLV_MEM_CTL,
-+} acxreg_t;
-+
-+/***********************************************************************
-+*/
-+static void acxmem_i_tx_timeout(struct net_device *ndev);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id);
-+#else
-+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+#endif
-+static void acxmem_i_set_multicast_list(struct net_device *ndev);
-+
-+static int acxmem_e_open(struct net_device *ndev);
-+static int acxmem_e_close(struct net_device *ndev);
-+static void acxmem_s_up(struct net_device *ndev);
-+static void acxmem_s_down(struct net_device *ndev);
-+
-+static void dump_acxmem (acx_device_t *adev, u32 start, int length);
-+static int acxmem_complete_hw_reset (acx_device_t *adev);
-+static void acxmem_s_delete_dma_regions(acx_device_t *adev);
-+
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxmem_e_suspend( struct net_device *ndev, pm_message_t state);
-+#else
-+acxmem_e_suspend( struct net_device *ndev, u32 state);
-+#endif
-+static void
-+fw_resumer(struct work_struct *notused);
-+//fw_resumer( void *data );
-+
-+static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
-+{
-+  struct net_device *ndev = ptr;
-+  acx_device_t *adev = ndev2adev(ndev);
-+
-+  /*
-+   * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes.
-+   */
-+
-+  if (NETDEV_CHANGEADDR == event) {
-+    /*
-+     * the upper layers put the new MAC address in ndev->dev_addr; we just copy
-+     * it over and update the ACX with it.
-+     */
-+    MAC_COPY(adev->dev_addr, adev->ndev->dev_addr);
-+    adev->set_mask |= GETSET_STATION_ID;
-+    acx_s_update_card_settings (adev);
-+  }
-+
-+  return 0;
-+}
-+
-+static struct notifier_block acx_netdev_notifier = {
-+        .notifier_call = acx_netdev_event,
-+};
-+
-+/***********************************************************************
-+** Register access
-+*/
-+
-+/* Pick one */
-+/* #define INLINE_IO static */
-+#define INLINE_IO static inline
-+
-+INLINE_IO u32
-+read_id_register (acx_device_t *adev)
-+{
-+  writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]);
-+  return readl (&adev->iobase[ACX_SLV_REG_DATA]);
-+}
-+
-+INLINE_IO u32
-+read_reg32(acx_device_t *adev, unsigned int offset)
-+{
-+        u32 val;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	  return readl(((u8*)adev->iobase) + addr);
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	val = readl( &adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return val;
-+}
-+
-+INLINE_IO u16
-+read_reg16(acx_device_t *adev, unsigned int offset)
-+{
-+	u16 lo;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    return readw(((u8 *) adev->iobase) + addr);
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return lo;
-+}
-+
-+INLINE_IO u8
-+read_reg8(acx_device_t *adev, unsigned int offset)
-+{
-+	u8 lo;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20)
-+	    return readb(((u8 *)adev->iobase) + addr);
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return (u8)lo;
-+}
-+
-+INLINE_IO void
-+write_reg32(acx_device_t *adev, unsigned int offset, u32 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writel(val, ((u8*)adev->iobase) + addr);
-+	    return;
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writel( val, &adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+INLINE_IO void
-+write_reg16(acx_device_t *adev, unsigned int offset, u16 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writew(val, ((u8 *)adev->iobase) + addr);
-+	    return;
-+	}
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+INLINE_IO void
-+write_reg8(acx_device_t *adev, unsigned int offset, u8 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writeb(val, ((u8 *) adev->iobase) + addr);
-+	    return;
-+	}
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+/* Handle PCI posting properly:
-+ * Make sure that writes reach the adapter in case they require to be executed
-+ * *before* the next write, by reading a random (and safely accessible) register.
-+ * This call has to be made if there is no read following (which would flush the data
-+ * to the adapter), yet the written data has to reach the adapter immediately. */
-+INLINE_IO void
-+write_flush(acx_device_t *adev)
-+{
-+	/* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */
-+	/* faster version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should also be safe): */
-+	(void) readl(adev->iobase);
-+}
-+
-+INLINE_IO void
-+set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) {
-+  u32 tmp;
-+
-+  tmp = read_reg32 (adev, offset);
-+  tmp = tmp | bits;
-+  write_reg32 (adev, offset, tmp);
-+  write_flush (adev);
-+}
-+
-+INLINE_IO void
-+clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) {
-+  u32 tmp;
-+
-+  tmp = read_reg32 (adev, offset);
-+  tmp = tmp & ~bits;
-+  write_reg32 (adev, offset, tmp);
-+  write_flush (adev);
-+}
-+
-+/*
-+ * Copy from PXA memory to the ACX memory.  This assumes both the PXA and ACX
-+ * addresses are 32 bit aligned.  Count is in bytes.
-+ */
-+INLINE_IO void
-+write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val)
-+{
-+  write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address);
-+  udelay (10);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val);
-+}
-+
-+INLINE_IO u32
-+read_slavemem32 (acx_device_t *adev, u32 slave_address)
-+{
-+  u32 val;
-+
-+  write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address);
-+  udelay (10);
-+  val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+
-+  return val;
-+}
-+
-+INLINE_IO void
-+write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val)
-+{
-+  u32 data;
-+  u32 base;
-+  int offset;
-+
-+  /*
-+   * Get the word containing the target address and the byte offset in that word.
-+   */
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+  data &= ~(0xff << offset);
-+  data |= val << offset;
-+  write_slavemem32 (adev, base, data);
-+}
-+
-+INLINE_IO u8
-+read_slavemem8 (acx_device_t *adev, u32 slave_address)
-+{
-+  u8 val;
-+  u32 base;
-+  u32 data;
-+  int offset;
-+
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+ 
-+  val = (data >> offset) & 0xff;
-+
-+  return val;
-+}
-+
-+/*
-+ * doesn't split across word boundaries
-+ */
-+INLINE_IO void
-+write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val)
-+{
-+  u32 data;
-+  u32 base;
-+  int offset;
-+
-+  /*
-+   * Get the word containing the target address and the byte offset in that word.
-+   */
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+  data &= ~(0xffff << offset);
-+  data |= val << offset;
-+  write_slavemem32 (adev, base, data);
-+}
-+
-+/*
-+ * doesn't split across word boundaries
-+ */
-+INLINE_IO u16
-+read_slavemem16 (acx_device_t *adev, u32 slave_address)
-+{
-+  u16 val;
-+  u32 base;
-+  u32 data;
-+  int offset;
-+
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+ 
-+  val = (data >> offset) & 0xffff;
-+
-+  return val;
-+}
-+
-+/*
-+ * Copy from slave memory
-+ *
-+ * TODO - rewrite using address autoincrement, handle partial words
-+ */
-+void
-+copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) {
-+  u32 tmp = 0;
-+  u8 *ptmp = (u8 *) &tmp;
-+
-+  /*
-+   * Right now I'm making the assumption that the destination is aligned, but
-+   * I'd better check.
-+   */
-+  if ((u32) destination & 3) {
-+    printk ("acx copy_from_slavemem: warning!  destination not word-aligned!\n");
-+  }
-+
-+  while (count >= 4) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source);
-+    udelay (10);
-+    *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    count -= 4;
-+    source += 4;
-+    destination += 4;
-+  }
-+
-+  /*
-+   * If the word reads above didn't satisfy the count, read one more word
-+   * and transfer a byte at a time until the request is satisfied.
-+   */
-+  if (count) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source);
-+    udelay (10);
-+    tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    while (count--) {
-+      *destination++ = *ptmp++;
-+    }
-+  }
-+}
-+
-+/*
-+ * Copy to slave memory
-+ *
-+ * TODO - rewrite using autoincrement, handle partial words
-+ */
-+void
-+copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count)
-+{
-+  u32 tmp = 0;
-+  u8* ptmp = (u8 *) &tmp;
-+  static u8 src[512];	/* make static to avoid huge stack objects */
-+
-+  /*
-+   * For now, make sure the source is word-aligned by copying it to a word-aligned
-+   * buffer.  Someday rewrite to avoid the extra copy.
-+   */
-+  if (count > sizeof (src)) {
-+    printk ("acx copy_to_slavemem: Warning! buffer overflow!\n");
-+    count = sizeof (src);
-+  }
-+  memcpy (src, source, count);
-+  source = src;
-+
-+  while (count >= 4) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source));
-+    count -= 4;
-+    source += 4;
-+    destination += 4;
-+  }
-+
-+  /*
-+   * If there are leftovers read the next word from the acx and merge in
-+   * what they want to write.
-+   */
-+  if (count) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    while (count--) {
-+      *ptmp++ = *source++;
-+    }
-+    /*
-+     * reset address in case we're currently in auto-increment mode
-+     */
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp);
-+    udelay (10);
-+  }
-+  
-+}
-+
-+/*
-+ * Block copy to slave buffers using memory block chain mode.  Copies to the ACX
-+ * transmit buffer structure with minimal intervention on our part.
-+ * Interrupts should be disabled when calling this.
-+ */
-+void
-+chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count)
-+{
-+  u32 val;
-+  u32 *data = (u32 *) source;
-+  static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS];
-+
-+  /*
-+   * Warn if the pointers don't look right.  Destination must fit in [23:5] with
-+   * zero elsewhere and source should be 32 bit aligned.
-+   * This should never happen since we're in control of both, but I want to know about
-+   * it if it does.
-+   */
-+  if ((destination & 0x00ffffe0) != destination) {
-+    printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination);
-+  }
-+  if (count > sizeof aligned_source) {
-+      printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" );
-+      count = sizeof aligned_source;
-+  }
-+  if ((u32) source & 3) {
-+    memcpy (aligned_source, source, count);
-+    data = (u32 *) aligned_source;
-+  }
-+
-+  /*
-+   * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment
-+   * SLV_MEM_CTL[5:2] = offset to data portion = 1 word
-+   */
-+  val = 2 << 16 | 1 << 2;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CTL]);
-+
-+  /*
-+   * SLV_MEM_CP[23:5] = start of 1st block
-+   * SLV_MEM_CP[3:2] = offset to memblkptr = 0
-+   */
-+  val = destination & 0x00ffffe0;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CP]);
-+
-+  /*
-+   * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5]
-+   */
-+  val = (destination & 0x00ffffe0) + (1<<2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]);
-+
-+  /*
-+   * Write the data to the slave data register, rounding up to the end
-+   * of the word containing the last byte (hence the > 0)
-+   */
-+  while (count > 0) {
-+    writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]);
-+    count -= 4;
-+  }
-+}
-+
-+
-+/*
-+ * Block copy from slave buffers using memory block chain mode.  Copies from the ACX
-+ * receive buffer structures with minimal intervention on our part.
-+ * Interrupts should be disabled when calling this.
-+ */
-+void
-+chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count)
-+{
-+  u32 val;
-+  u32 *data = (u32 *) destination;
-+  static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS];
-+  int saved_count = count;
-+
-+  /*
-+   * Warn if the pointers don't look right.  Destination must fit in [23:5] with
-+   * zero elsewhere and source should be 32 bit aligned.
-+   * Turns out the network stack sends unaligned things, so fix them before
-+   * copying to the ACX.
-+   */
-+  if ((source & 0x00ffffe0) != source) {
-+    printk ("acx chaincopy: source block 0x%04x not aligned!\n", source);
-+    dump_acxmem (adev, 0, 0x10000);
-+  }
-+  if ((u32) destination & 3) {
-+    //printk ("acx chaincopy: data destination not word aligned!\n");
-+    data = (u32 *) aligned_destination;
-+    if (count > sizeof aligned_destination) {
-+	printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" );
-+	count = sizeof aligned_destination;
-+    }
-+  }
-+
-+  /*
-+   * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment
-+   * SLV_MEM_CTL[5:2] = offset to data portion = 1 word
-+   */
-+  val = (2 << 16) | (1 << 2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CTL]);
-+
-+  /*
-+   * SLV_MEM_CP[23:5] = start of 1st block
-+   * SLV_MEM_CP[3:2] = offset to memblkptr = 0
-+   */
-+  val = source & 0x00ffffe0;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CP]);
-+
-+  /*
-+   * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5]
-+   */
-+  val = (source & 0x00ffffe0) + (1<<2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]);
-+
-+  /*
-+   * Read the data from the slave data register, rounding up to the end
-+   * of the word containing the last byte (hence the > 0)
-+   */
-+  while (count > 0) {
-+    *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]);
-+    count -= 4;
-+  }
-+
-+  /*
-+   * If the destination wasn't aligned, we would have saved it in
-+   * the aligned buffer, so copy it where it should go.
-+   */
-+  if ((u32) destination & 3) {
-+    memcpy (destination, aligned_destination, saved_count);
-+  }
-+}
-+
-+char
-+printable (char c) 
-+{
-+  return ((c >= 20) && (c < 127)) ? c : '.';
-+}
-+
-+#if DUMP_MEM_DEFINED > 0
-+static void
-+dump_acxmem (acx_device_t *adev, u32 start, int length)
-+{
-+  int i;
-+  u8 buf[16];
-+
-+  while (length > 0) {
-+    printk ("%04x ", start);
-+    copy_from_slavemem (adev, buf, start, 16);
-+    for (i = 0; (i < 16) && (i < length); i++) {
-+      printk ("%02x ", buf[i]);
-+    }
-+    for (i = 0; (i < 16) && (i < length); i++) {
-+      printk ("%c", printable (buf[i]));
-+    }
-+    printk ("\n");
-+    start += 16;
-+    length -= 16;
-+  }
-+}
-+#endif
-+
-+static void
-+enable_acx_irq(acx_device_t *adev);
-+static void
-+disable_acx_irq(acx_device_t *adev);
-+
-+/*
-+ * Return an acx pointer to the next transmit data block.
-+ */
-+u32
-+allocate_acx_txbuf_space (acx_device_t *adev, int count) {
-+  u32 block, next, last_block;
-+  int blocks_needed;
-+  unsigned long flags;
-+
-+  spin_lock_irqsave(&adev->txbuf_lock, flags);
-+  /*
-+   * Take 4 off the memory block size to account for the reserved word at the start of
-+   * the block.
-+   */
-+  blocks_needed = count / (adev->memblocksize - 4);
-+  if (count % (adev->memblocksize - 4))
-+    blocks_needed++;
-+
-+  if (blocks_needed <= adev->acx_txbuf_blocks_free) {
-+    /*
-+     * Take blocks at the head of the free list.
-+     */
-+    last_block = block = adev->acx_txbuf_free;
-+
-+    /*
-+     * Follow block pointers through the requested number of blocks both to
-+     * find the new head of the free list and to set the flags for the blocks
-+     * appropriately.
-+     */
-+    while (blocks_needed--) {
-+      /*
-+       * Keep track of the last block of the allocation
-+       */
-+      last_block = adev->acx_txbuf_free;
-+
-+      /*
-+       * Make sure the end control flag is not set.
-+       */
-+      next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff;
-+      write_slavemem32 (adev, adev->acx_txbuf_free, next);
-+
-+      /*
-+       * Update the new head of the free list
-+       */
-+      adev->acx_txbuf_free = next << 5;
-+      adev->acx_txbuf_blocks_free--;
-+
-+    }
-+
-+    /*
-+     * Flag the last block both by clearing out the next pointer
-+     * and marking the control field.
-+     */
-+    write_slavemem32 (adev, last_block, 0x02000000);
-+
-+    /*
-+     * If we're out of buffers make sure the free list pointer is NULL
-+     */
-+    if (!adev->acx_txbuf_blocks_free) {
-+      adev->acx_txbuf_free = 0;
-+    }
-+  }
-+  else {
-+    block = 0;
-+  }
-+  spin_unlock_irqrestore (&adev->txbuf_lock, flags);
-+  return block;
-+}
-+
-+/*
-+ * Return buffer space back to the pool by following the next pointers until we find
-+ * the block marked as the end.  Point the last block to the head of the free list,
-+ * then update the head of the free list to point to the newly freed memory.
-+ * This routine gets called in interrupt context, so it shouldn't block to protect
-+ * the integrity of the linked list.  The ISR already holds the lock.
-+ */
-+void
-+reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) {
-+  u32 cur, last, next;
-+  unsigned long flags;
-+
-+  spin_lock_irqsave (&adev->txbuf_lock, flags);
-+  if ((blockptr >= adev->acx_txbuf_start) &&
-+      (blockptr <= adev->acx_txbuf_start +
-+       (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) {
-+    cur = blockptr;
-+    do {
-+      last = cur;
-+      next = read_slavemem32 (adev, cur);
-+      
-+      /*
-+       * Advance to the next block in this allocation
-+       */
-+      cur = (next & 0x7ffff) << 5;
-+      
-+      /*
-+       * This block now counts as free.
-+       */
-+      adev->acx_txbuf_blocks_free++;
-+    } while (!(next & 0x02000000));
-+    
-+    /*
-+     * last now points to the last block of that allocation.  Update the pointer
-+     * in that block to point to the free list and reset the free list to the
-+     * first block of the free call.  If there were no free blocks, make sure
-+     * the new end of the list marks itself as truly the end.
-+     */
-+    if (adev->acx_txbuf_free) {
-+      write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5);
-+    }
-+    else {
-+      write_slavemem32 (adev, last, 0x02000000);
-+    }
-+    adev->acx_txbuf_free = blockptr;
-+  } 
-+  spin_unlock_irqrestore(&adev->txbuf_lock, flags);
-+}
-+
-+/*
-+ * Initialize the pieces managing the transmit buffer pool on the ACX.  The transmit
-+ * buffer is a circular queue with one 32 bit word reserved at the beginning of each
-+ * block.  The upper 13 bits are a control field, of which only 0x02000000 has any
-+ * meaning.  The lower 19 bits are the address of the next block divided by 32.
-+ */
-+void
-+init_acx_txbuf (acx_device_t *adev) {
-+  
-+  /*
-+   * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us.
-+   * All we need to do is reset the rest of the bookeeping.
-+   */
-+  
-+  adev->acx_txbuf_free = adev->acx_txbuf_start;
-+  adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks;
-+  
-+  /*
-+   * Initialization leaves the last transmit pool block without a pointer back to
-+   * the head of the list, but marked as the end of the list.  That's how we want
-+   * to see it, too, so leave it alone.  This is only ever called after a firmware
-+   * reset, so the ACX memory is in the state we want.
-+   */
-+	
-+}
-+
-+INLINE_IO int
-+adev_present(acx_device_t *adev)
-+{
-+	/* fast version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should be safe): */
-+	return readl(adev->iobase) != 0xffffffff;
-+}
-+
-+/***********************************************************************
-+*/
-+static inline txdesc_t*
-+get_txdesc(acx_device_t *adev, int index)
-+{
-+	return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size);
-+}
-+
-+static inline txdesc_t*
-+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc)
-+{
-+	return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size);
-+}
-+
-+static txhostdesc_t*
-+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return &adev->txhostdesc_start[index*2];
-+}
-+
-+static inline client_t*
-+get_txc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return adev->txc[index];
-+}
-+
-+static inline u16
-+get_txr(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	index /= adev->txdesc_size;
-+	return adev->txr[index];
-+}
-+
-+static inline void
-+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	adev->txc[index] = c;
-+	adev->txr[index] = r111;
-+}
-+
-+
-+/***********************************************************************
-+** EEPROM and PHY read/write helpers
-+*/
-+/***********************************************************************
-+** acxmem_read_eeprom_byte
-+**
-+** Function called to read an octet in the EEPROM.
-+**
-+** This function is used by acxmem_e_probe to check if the
-+** connected card is a legal one or not.
-+**
-+** Arguments:
-+**	adev		ptr to acx_device structure
-+**	addr		address to read in the EEPROM
-+**	charbuf		ptr to a char. This is where the read octet
-+**			will be stored
-+*/
-+int
-+acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf)
-+{
-+	int result;
-+	int count;
-+
-+	write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+	write_reg32(adev, IO_ACX_EEPROM_ADDR, addr);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for EEPROM read\n",
-+							adev->ndev->name);
-+			result = NOT_OK;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	*charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA);
-+	log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf);
-+	result = OK;
-+
-+fail:
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** We don't lock hw accesses here since we never r/w eeprom in IRQ
-+** Note: this function sleeps only because of GFP_KERNEL alloc
-+*/
-+#ifdef UNUSED
-+int
-+acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf)
-+{
-+	u8 *data_verify = NULL;
-+	unsigned long flags;
-+	int count, i;
-+	int result = NOT_OK;
-+	u16 gpio_orig;
-+
-+	printk("acx: WARNING! I would write to EEPROM now. "
-+		"Since I really DON'T want to unless you know "
-+		"what you're doing (THIS CODE WILL PROBABLY "
-+		"NOT WORK YET!), I will abort that now. And "
-+		"definitely make sure to make a "
-+		"/proc/driver/acx_wlan0_eeprom backup copy first!!! "
-+		"(the EEPROM content includes the PCI config header!! "
-+		"If you kill important stuff, then you WILL "
-+		"get in trouble and people DID get in trouble already)\n");
-+	return OK;
-+
-+	FN_ENTER;
-+
-+	data_verify = kmalloc(len, GFP_KERNEL);
-+	if (!data_verify) {
-+		goto end;
-+	}
-+
-+	/* first we need to enable the OE (EEPROM Output Enable) GPIO line
-+	 * to be able to write to the EEPROM.
-+	 * NOTE: an EEPROM writing success has been reported,
-+	 * but you probably have to modify GPIO_OUT, too,
-+	 * and you probably need to activate a different GPIO
-+	 * line instead! */
-+	gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE);
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1);
-+	write_flush(adev);
-+
-+	/* ok, now start writing the data out */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i));
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 1);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("WARNING, DANGER!!! "
-+					"Timeout waiting for EEPROM write\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+	}
-+
-+	/* disable EEPROM writing */
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig);
-+	write_flush(adev);
-+
-+	/* now start a verification run */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("timeout waiting for EEPROM read\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+
-+		data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA);
-+	}
-+
-+	if (0 == memcmp(charbuf, data_verify, len))
-+		result = OK; /* read data matches, success */
-+
-+end:
-+	kfree(data_verify);
-+	FN_EXIT1(result);
-+	return result;
-+}
-+#endif /* UNUSED */
-+
-+
-+/***********************************************************************
-+** acxmem_s_read_phy_reg
-+**
-+** Messing with rx/tx disabling and enabling here
-+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic
-+*/
-+int
-+acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	int result = NOT_OK;
-+	int count;
-+
-+	FN_ENTER;
-+
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			*charbuf = 0;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "count was %u\n", count);
-+	*charbuf = read_reg8(adev, IO_ACX_PHY_DATA);
-+
-+	log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg);
-+	result = OK;
-+	goto fail; /* silence compiler warning */
-+fail:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+        int count;
-+	FN_ENTER;
-+
-+	/* mprusko said that 32bit accesses result in distorted sensitivity
-+	 * on his card. Unconfirmed, looks like it's not true (most likely since we
-+	 * now properly flush writes). */
-+	write_reg32(adev, IO_ACX_PHY_DATA, value);
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 1);
-+	write_flush(adev);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg);
-+ fail:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+#define NO_AUTO_INCREMENT	1
-+
-+/***********************************************************************
-+** acxmem_s_write_fw
-+**
-+** Write the firmware image into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	1	firmware image corrupted
-+**	0	success
-+*/
-+static int
-+acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset)
-+{
-+	int len, size, checkMismatch = -1;
-+	u32 sum, v32, tmp, id;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+	write_flush(adev);
-+#endif
-+#endif
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		sum += p[0]+p[1]+p[2]+p[3];
-+		p += 4;
-+		len += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT 
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+		write_flush(adev);
-+#endif
-+		write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32);
-+		write_flush(adev);
-+#endif
-+		write_slavemem32 (adev, offset + len - 4, v32);
-+
-+		id = read_id_register (adev);
-+		
-+		/*
-+		 * check the data written
-+		 */
-+		tmp = read_slavemem32 (adev, offset + len - 4);
-+		if (checkMismatch && (tmp != v32)) {
-+		  printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n",
-+			  offset + len - 4, v32, tmp, id);
-+		  checkMismatch = 0;
-+		}
-+	}
-+	log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n",
-+			size, sum, le32_to_cpu(fw_image->chksum));
-+
-+	/* compare our checksum with the stored image checksum */
-+	return (sum != le32_to_cpu(fw_image->chksum));
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_validate_fw
-+**
-+** Compare the firmware image given with
-+** the firmware image written into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	NOT_OK	firmware image corrupted or not correctly written
-+**	OK	success
-+*/
-+static int
-+acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image,
-+				u32 offset)
-+{
-+	u32 sum, v32, w32;
-+	int len, size;
-+	int result = OK;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+	write_reg32(adev, IO_ACX_SLV_END_CTL, 0);
-+
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+#endif
-+
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		p += 4;
-+		len += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+#endif
-+		udelay(10);
-+		w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA);
-+#endif
-+		w32 = read_slavemem32 (adev, offset + len - 4);
-+
-+		if (unlikely(w32 != v32)) {
-+			printk("acx: FATAL: firmware upload: "
-+			"data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n"
-+			"I/O timing issues or defective memory, with DWL-xx0+? "
-+			"ACX_IO_WIDTH=16 may help. Please report\n",
-+				len, v32, w32);
-+			result = NOT_OK;
-+			break;
-+		}
-+
-+		sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24);
-+	}
-+
-+	/* sum control verification */
-+	if (result != NOT_OK) {
-+		if (sum != le32_to_cpu(fw_image->chksum)) {
-+			printk("acx: FATAL: firmware upload: "
-+				"checksums don't match!\n");
-+			result = NOT_OK;
-+		}
-+	}
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_upload_fw
-+**
-+** Called from acx_reset_dev
-+*/
-+static int
-+acxmem_s_upload_fw(acx_device_t *adev)
-+{
-+	firmware_image_t *fw_image = NULL;
-+	int res = NOT_OK;
-+	int try;
-+	u32 file_size;
-+	char *filename = "WLANGEN.BIN";
-+#ifdef PATCH_AROUND_BAD_SPOTS
-+	u32 offset;
-+	int i;
-+        /*
-+         * arm-linux-objdump -d patch.bin, or
-+         * od -Ax -t x4 patch.bin after finding the bounds
-+         * of the .text section with arm-linux-objdump -s patch.bin
-+         */
-+        u32 patch[] = {
-+	  0xe584c030, 0xe59fc008,
-+	  0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c,
-+	  0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a,
-+	  0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24,
-+	  0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db,
-+	  0x60ca6003, 0xbdf0750a, 0xffff0808
-+	};
-+#endif
-+
-+	FN_ENTER;
-+	/* No combined image; tell common we need the radio firmware, too */
-+	adev->need_radio_fw = 1;
-+
-+	fw_image = acx_s_read_fw(adev->dev, filename, &file_size);
-+	if (!fw_image) {
-+	  FN_EXIT1(NOT_OK);
-+	  return NOT_OK;
-+	}
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxmem_s_write_fw(adev, fw_image, 0);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res);
-+		if (OK == res) {
-+			res = acxmem_s_validate_fw(adev, fw_image, 0);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw "
-+					"(main): %d\n", res);
-+		}
-+
-+		if (OK == res) {
-+			SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED);
-+			break;
-+		}
-+		printk("acx: firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+#ifdef PATCH_AROUND_BAD_SPOTS
-+	/*
-+	 * Only want to do this if the firmware is exactly what we expect for an
-+	 * iPaq 4700; otherwise, bad things would ensue.
-+	 */
-+	if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) ||
-+	    (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) {
-+	  /*
-+	   * Put the patch after the main firmware image.  0x950c contains
-+	   * the ACX's idea of the end of the firmware.  Use that location to
-+	   * load ours (which depends on that location being 0xab58) then
-+	   * update that location to point to after ours.
-+	   */
-+
-+	  offset = read_slavemem32 (adev, 0x950c);
-+	  
-+	  log (L_DEBUG, "acx: patching in at 0x%04x\n", offset);
-+
-+	  for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) {
-+	    write_slavemem32 (adev, offset, patch[i]);
-+	    offset += sizeof(u32);
-+	  }
-+
-+	  /*
-+	   * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58
-+	   */
-+	  write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4);
-+
-+	  /*
-+	   * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74
-+	   *
-+	   * 4a00 ldr r2, [pc, #0]
-+	   * 4710 bx  r2
-+	   * .data 0xab74+1
-+	   */
-+	  write_slavemem32 (adev, 0x1f40, 0x47104a00);
-+	  write_slavemem32 (adev, 0x1f44, 0x0000ab74+1);
-+
-+	  /*
-+	   * Bump the end of the firmware up to beyond our patch.
-+	   */
-+	  write_slavemem32 (adev, 0x950c, offset);
-+	
-+	}
-+#endif
-+
-+	vfree(fw_image);
-+
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_upload_radio
-+**
-+** Uploads the appropriate radio module firmware into the card.
-+*/
-+int
-+acxmem_s_upload_radio(acx_device_t *adev)
-+{
-+	acx_ie_memmap_t mm;
-+	firmware_image_t *radio_image;
-+	acx_cmd_radioinit_t radioinit;
-+	int res = NOT_OK;
-+	int try;
-+	u32 offset;
-+	u32 size;
-+	char filename[sizeof("RADIONN.BIN")];
-+
-+	if (!adev->need_radio_fw) return OK;
-+
-+	FN_ENTER;
-+
-+	acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+	offset = le32_to_cpu(mm.CodeEnd);
-+
-+	snprintf(filename, sizeof(filename), "RADIO%02x.BIN",
-+		adev->radio_type);
-+	radio_image = acx_s_read_fw(adev->dev, filename, &size);
-+	if (!radio_image) {
-+		printk("acx: can't load radio module '%s'\n", filename);
-+		goto fail;
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0);
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxmem_s_write_fw(adev, radio_image, offset);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res);
-+		if (OK == res) {
-+			res = acxmem_s_validate_fw(adev, radio_image, offset);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res);
-+		}
-+
-+		if (OK == res)
-+			break;
-+		printk("acx: radio firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+	radioinit.offset = cpu_to_le32(offset);
-+
-+	/* no endian conversion needed, remains in card CPU area: */
-+	radioinit.len = radio_image->size;
-+
-+	vfree(radio_image);
-+
-+	if (OK != res)
-+		goto fail;
-+
-+	/* will take a moment so let's have a big timeout */
-+	acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT,
-+		&radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000));
-+
-+	res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+
-+fail:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+/***********************************************************************
-+** acxmem_l_reset_mac
-+**
-+** MAC will be reset
-+** Call context: reset_dev
-+*/
-+static void
-+acxmem_l_reset_mac(acx_device_t *adev)
-+{
-+  int count;
-+	FN_ENTER;
-+
-+	/* halt eCPU */
-+	set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1);
-+
-+	/* now do soft reset of eCPU, set bit */
-+	set_regbits (adev, IO_ACX_SOFT_RESET, 0x1);
-+	log(L_DEBUG, "%s: enable soft reset...\n", __func__);
-+
-+	/* Windows driver sleeps here for a while with this sequence */
-+	for (count = 0; count < 200; count++) {
-+	  udelay (50);
-+	}
-+
-+	/* now clear bit again: deassert eCPU reset */
-+	log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__);
-+	clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1);
-+
-+	/* now start a burst read from initial EEPROM */
-+	set_regbits (adev, IO_ACX_EE_START, 0x1);
-+
-+	/*
-+	 * Windows driver sleeps here for a while with this sequence
-+	 */
-+	for (count = 0; count < 200; count++) {
-+	  udelay (50);
-+	}
-+
-+	/* Windows driver writes 0x10000 to register 0x808 here */
-+	
-+	write_reg32 (adev, 0x808, 0x10000);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_verify_init
-+*/
-+static int
-+acxmem_s_verify_init(acx_device_t *adev)
-+{
-+	int result = NOT_OK;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	timeout = jiffies + 2*HZ;
-+	for (;;) {
-+		u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+		if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) {
-+			result = OK;
-+			write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD);
-+			break;
-+		}
-+		if (time_after(jiffies, timeout))
-+			break;
-+		/* Init may take up to ~0.5 sec total */
-+		acx_s_msleep(50);
-+	}
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** A few low-level helpers
-+**
-+** Note: these functions are not protected by lock
-+** and thus are never allowed to be called from IRQ.
-+** Also they must not race with fw upload which uses same hw regs
-+*/
-+
-+/***********************************************************************
-+** acxmem_write_cmd_type_status
-+*/
-+
-+static inline void
-+acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status)
-+{
-+  write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16));
-+  write_flush(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_read_cmd_type_status
-+*/
-+static u32
-+acxmem_read_cmd_type_status(acx_device_t *adev)
-+{
-+	u32 cmd_type, cmd_status;
-+
-+	cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area);
-+
-+	cmd_status = (cmd_type >> 16);
-+	cmd_type = (u16)cmd_type;
-+
-+	log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n",
-+		cmd_type, cmd_status,
-+		acx_cmd_status_str(cmd_status));
-+
-+	return cmd_status;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_reset_dev
-+**
-+** Arguments:
-+**	netdevice that contains the adev variable
-+** Returns:
-+**	NOT_OK on fail
-+**	OK on success
-+** Side effects:
-+**	device is hard reset
-+** Call context:
-+**	acxmem_e_probe
-+** Comment:
-+**	This resets the device using low level hardware calls
-+**	as well as uploads and verifies the firmware to the card
-+*/
-+
-+static inline void
-+init_mboxes(acx_device_t *adev)
-+{
-+	u32 cmd_offs, info_offs;
-+
-+	cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS);
-+	info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS);
-+	adev->cmd_area = (u8*) cmd_offs;
-+	adev->info_area = (u8*) info_offs;
-+	/*
-+	log(L_DEBUG, "iobase2=%p\n"
-+	*/
-+	log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n"
-+		"info_mbox_offset=%X info_area=%p\n",
-+		cmd_offs, adev->cmd_area,
-+		info_offs, adev->info_area);
-+}
-+
-+
-+static inline void
-+read_eeprom_area(acx_device_t *adev)
-+{
-+#if ACX_DEBUG > 1
-+	int offs;
-+	u8 tmp;
-+
-+	for (offs = 0x8c; offs < 0xb9; offs++)
-+		acxmem_read_eeprom_byte(adev, offs, &tmp);
-+#endif
-+}
-+
-+static int
-+acxmem_s_reset_dev(acx_device_t *adev)
-+{
-+	const char* msg = "";
-+	unsigned long flags;
-+	int result = NOT_OK;
-+	u16 hardware_info;
-+	u16 ecpu_ctrl;
-+	int count;
-+	u32 tmp;
-+
-+	FN_ENTER;
-+	/*
-+	write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0);
-+	*/
-+	/* reset the device to make sure the eCPU is stopped
-+	 * to upload the firmware correctly */
-+
-+	acx_lock(adev, flags);
-+
-+	/* Windows driver does some funny things here */
-+	/*
-+	 * clear bit 0x200 in register 0x2A0
-+	 */
-+	clear_regbits (adev, 0x2A0, 0x200);
-+
-+	/*
-+	 * Set bit 0x200 in ACX_GPIO_OUT
-+	 */
-+	set_regbits (adev, IO_ACX_GPIO_OUT, 0x200);
-+
-+	/*
-+	 * read register 0x900 until its value is 0x8400104C, sleeping
-+	 * in between reads if it's not immediate
-+	 */
-+	tmp = read_reg32 (adev, REG_ACX_VENDOR_ID);
-+	count = 500;
-+	while (count-- && (tmp != ACX_VENDOR_ID)) {
-+	  mdelay (10);
-+	  tmp = read_reg32 (adev, REG_ACX_VENDOR_ID);
-+	}
-+
-+	/* end what Windows driver does */
-+
-+	acxmem_l_reset_mac(adev);
-+
-+	ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1;
-+	if (!ecpu_ctrl) {
-+		msg = "eCPU is already running. ";
-+		goto end_unlock;
-+	}
-+
-+#ifdef WE_DONT_NEED_THAT_DO_WE
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) {
-+		/* eCPU most likely means "embedded CPU" */
-+		msg = "eCPU did not start after boot from flash. ";
-+		goto end_unlock;
-+	}
-+
-+	/* check sense on reset flags */
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) {
-+		printk("%s: eCPU did not start after boot (SOR), "
-+			"is this fatal?\n", adev->ndev->name);
-+	}
-+#endif
-+	/* scan, if any, is stopped now, setting corresponding IRQ bit */
-+	adev->irq_status |= HOST_INT_SCAN_COMPLETE;
-+
-+	acx_unlock(adev, flags);
-+	
-+	/* need to know radio type before fw load */
-+	/* Need to wait for arrival of this information in a loop,
-+	 * most probably since eCPU runs some init code from EEPROM
-+	 * (started burst read in reset_mac()) which also
-+	 * sets the radio type ID */
-+
-+	count = 0xffff;
-+	do {
-+		hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION);
-+		if (!--count) {
-+			msg = "eCPU didn't indicate radio type";
-+			goto end_fail;
-+		}
-+		cpu_relax();
-+	} while (!(hardware_info & 0xff00)); /* radio type still zero? */
-+	printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff);
-+	/* printk("DEBUG: count %d\n", count); */
-+	adev->form_factor = hardware_info & 0xff;
-+	adev->radio_type = hardware_info >> 8;
-+
-+	/* load the firmware */
-+	if (OK != acxmem_s_upload_fw(adev))
-+		goto end_fail;
-+
-+	/* acx_s_msleep(10);	this one really shouldn't be required */
-+
-+	/* now start eCPU by clearing bit */
-+	clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1);
-+	log(L_DEBUG, "booted eCPU up and waiting for completion...\n");
-+
-+	/* Windows driver clears bit 0x200 in register 0x2A0 here */
-+	clear_regbits (adev, 0x2A0, 0x200);
-+
-+	/* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */
-+	set_regbits (adev, IO_ACX_GPIO_OUT, 0x200);
-+	/* wait for eCPU bootup */
-+	if (OK != acxmem_s_verify_init(adev)) {
-+		msg = "timeout waiting for eCPU. ";
-+		goto end_fail;
-+	}
-+	log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n");
-+	init_mboxes(adev);
-+	acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0);
-+
-+	/* test that EEPROM is readable */
-+	read_eeprom_area(adev);
-+
-+	result = OK;
-+	goto end;
-+
-+/* Finish error message. Indicate which function failed */
-+end_unlock:
-+	acx_unlock(adev, flags);
-+end_fail:
-+	printk("acx: %sreset_dev() FAILED\n", msg);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_issue_cmd_timeo
-+**
-+** Sends command to fw, extract result
-+**
-+** NB: we do _not_ take lock inside, so be sure to not touch anything
-+** which may interfere with IRQ handler operation
-+**
-+** TODO: busy wait is a bit silly, so:
-+** 1) stop doing many iters - go to sleep after first
-+** 2) go to waitqueue based approach: wait, not poll!
-+*/
-+#undef FUNC
-+#define FUNC "issue_cmd"
-+
-+#if !ACX_DEBUG
-+int
-+acxmem_s_issue_cmd_timeo(
-+	acx_device_t *adev,
-+	unsigned int cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout)
-+{
-+#else
-+int
-+acxmem_s_issue_cmd_timeo_debug(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout,
-+	const char* cmdstr)
-+{
-+	unsigned long start = jiffies;
-+#endif
-+	const char *devname;
-+	unsigned counter;
-+	u16 irqtype;
-+	int i, j;
-+	u8 *p;
-+	u16 cmd_status;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	devname = adev->ndev->name;
-+	if (!devname || !devname[0] || devname[4]=='%')
-+		devname = "acx";
-+
-+	log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n",
-+		cmdstr, buflen, cmd_timeout,
-+		buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1);
-+
-+	if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) {
-+		printk("%s: "FUNC"(): firmware is not loaded yet, "
-+			"cannot execute commands!\n", devname);
-+		goto bad;
-+	}
-+
-+	if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) {
-+		printk("input buffer (len=%u):\n", buflen);
-+		acx_dump_bytes(buffer, buflen);
-+	}
-+
-+	/* wait for firmware to become idle for our command submission */
-+	timeout = HZ/5;
-+	counter = (timeout * 1000 / HZ) - 1; /* in ms */
-+	timeout += jiffies;
-+	do {
-+		cmd_status = acxmem_read_cmd_type_status(adev);
-+		/* Test for IDLE state */
-+		if (!cmd_status)
-+			break;
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	if (!counter) {
-+		/* the card doesn't get idle, we're in trouble */
-+		printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n",
-+			devname, cmd_status);
-+#if DUMP_IF_SLOW > 0
-+		dump_acxmem (adev, 0, 0x10000);
-+		panic ("not idle");
-+#endif
-+		goto bad;
-+	} else if (counter < 190) { /* if waited >10ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. "
-+			"Please report\n", 199 - counter);
-+	}
-+
-+	/* now write the parameters of the command if needed */
-+	if (buffer && buflen) {
-+		/* if it's an INTERROGATE command, just pass the length
-+		 * of parameters to read, as data */
-+#if CMD_DISCOVERY
-+		if (cmd == ACX1xx_CMD_INTERROGATE)
-+			memset_io(adev->cmd_area + 4, 0xAA, buflen);
-+#endif
-+		/*
-+		 * slave memory version
-+		 */
-+		copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, 
-+			       (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen);
-+	}
-+	/* now write the actual command type */
-+	acxmem_write_cmd_type_status(adev, cmd, 0);
-+
-+	/* clear CMD_COMPLETE bit. can be set only by IRQ handler: */
-+	adev->irq_status &= ~HOST_INT_CMD_COMPLETE;
-+
-+	/* execute command */
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD);
-+	write_flush(adev);
-+
-+	/* wait for firmware to process command */
-+
-+	/* Ensure nonzero and not too large timeout.
-+	** Also converts e.g. 100->99, 200->199
-+	** which is nice but not essential */
-+	cmd_timeout = (cmd_timeout-1) | 1;
-+	if (unlikely(cmd_timeout > 1199))
-+		cmd_timeout = 1199;
-+
-+	/* we schedule away sometimes (timeout can be large) */
-+	counter = cmd_timeout;
-+	timeout = jiffies + cmd_timeout * HZ / 1000;
-+	do {
-+		if (!adev->irqs_active) { /* IRQ disabled: poll */
-+			irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+			if (irqtype & HOST_INT_CMD_COMPLETE) {
-+				write_reg16(adev, IO_ACX_IRQ_ACK,
-+						HOST_INT_CMD_COMPLETE);
-+				break;
-+			}
-+		} else { /* Wait when IRQ will set the bit */
-+			irqtype = adev->irq_status;
-+			if (irqtype & HOST_INT_CMD_COMPLETE)
-+				break;
-+		}
-+
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	/* save state for debugging */
-+	cmd_status = acxmem_read_cmd_type_status(adev);
-+
-+	/* put the card in IDLE state */
-+	acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0);
-+
-+	if (!counter) {	/* timed out! */
-+		printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. "
-+			"irq bits:0x%04X irq_status:0x%04X timeout:%dms "
-+			"cmd_status:%d (%s)\n",
-+			devname, (adev->irqs_active) ? "waiting" : "polling",
-+			irqtype, adev->irq_status, cmd_timeout,
-+			cmd_status, acx_cmd_status_str(cmd_status));
-+		printk("%s: "FUNC"(): device irq status 0x%04x\n",
-+		       devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES));
-+		printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n",
-+		       devname,
-+		       read_reg16 (adev, IO_ACX_IRQ_MASK),
-+		       read_reg16 (adev, IO_ACX_FEMR));
-+		if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) {
-+			printk ("acxmem: firmware probably hosed - reloading\n");
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+                	{
-+				pm_message_t state;
-+				/* acxmem_e_suspend (resume_pdev, state); */
-+				acxmem_e_suspend (adev->ndev , state);
-+			}
-+#else
-+			acxmem_e_suspend (adev, 0);
-+#endif
-+			{
-+				resume_ndev = adev->ndev;
-+				fw_resumer (NULL);
-+			}
-+		}
-+
-+		goto bad;
-+	} else if (cmd_timeout - counter > 30) { /* if waited >30ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. "
-+			"count:%d. Please report\n",
-+			(adev->irqs_active) ? "waited" : "polled",
-+			cmd_timeout - counter, counter);
-+	}
-+
-+	if (1 != cmd_status) { /* it is not a 'Success' */
-+		printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). "
-+			"Took %dms of %d\n",
-+			devname, cmd_status, acx_cmd_status_str(cmd_status),
-+			cmd_timeout - counter, cmd_timeout);
-+		/* zero out result buffer
-+		 * WARNING: this will trash stack in case of illegally large input
-+		 * length! */
-+		if (buflen > 388) {
-+		  /*
-+		   * 388 is maximum command length
-+		   */
-+		  printk ("invalid length 0x%08x\n", buflen);
-+		  buflen = 388;
-+		}
-+		p = (u8 *) buffer;
-+		for (i = 0; i < buflen; i+= 16) {
-+		  printk ("%04x:", i);
-+		  for (j = 0; (j < 16) && (i+j < buflen); j++) {
-+		    printk (" %02x", *p++);
-+		  }
-+		  printk ("\n");
-+		}
-+		if (buffer && buflen)
-+			memset(buffer, 0, buflen);
-+		goto bad;
-+	}
-+
-+	/* read in result parameters if needed */
-+	if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) {
-+		copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen);
-+		if (acx_debug & L_DEBUG) {
-+			printk("output buffer (len=%u): ", buflen);
-+			acx_dump_bytes(buffer, buflen);
-+		}
-+	}
-+
-+/* ok: */
-+	log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n",
-+			 cmdstr, jiffies - start);
-+	FN_EXIT1(OK);
-+	return OK;
-+
-+bad:
-+	/* Give enough info so that callers can avoid
-+	** printing their own diagnostic messages */
-+#if ACX_DEBUG
-+	printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr);
-+#else
-+	printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd);
-+#endif
-+	dump_stack();
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#if defined(NONESSENTIAL_FEATURES)
-+typedef struct device_id {
-+	unsigned char id[6];
-+	char *descr;
-+	char *type;
-+} device_id_t;
-+
-+static const device_id_t
-+device_ids[] =
-+{
-+	{
-+		{'G', 'l', 'o', 'b', 'a', 'l'},
-+		NULL,
-+		NULL,
-+	},
-+	{
-+		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
-+		"uninitialized",
-+		"SpeedStream SS1021 or Gigafast WF721-AEX"
-+	},
-+	{
-+		{0x80, 0x81, 0x82, 0x83, 0x84, 0x85},
-+		"non-standard",
-+		"DrayTek Vigor 520"
-+	},
-+	{
-+		{'?', '?', '?', '?', '?', '?'},
-+		"non-standard",
-+		"Level One WPC-0200"
-+	},
-+	{
-+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
-+		"empty",
-+		"DWL-650+ variant"
-+	}
-+};
-+
-+static void
-+acx_show_card_eeprom_id(acx_device_t *adev)
-+{
-+	unsigned char buffer[CARD_EEPROM_ID_SIZE];
-+	int i;
-+
-+	memset(&buffer, 0, CARD_EEPROM_ID_SIZE);
-+	/* use direct EEPROM access */
-+	for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) {
-+		if (OK != acxmem_read_eeprom_byte(adev,
-+					 ACX100_EEPROM_ID_OFFSET + i,
-+					 &buffer[i])) {
-+			printk("acx: reading EEPROM FAILED\n");
-+			break;
-+		}
-+	}
-+
-+	for (i = 0; i < VEC_SIZE(device_ids); i++) {
-+		if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) {
-+			if (device_ids[i].descr) {
-+				printk("acx: EEPROM card ID string check "
-+					"found %s card ID: is this %s?\n",
-+					device_ids[i].descr, device_ids[i].type);
-+			}
-+			break;
-+		}
-+	}
-+	if (i == VEC_SIZE(device_ids)) {
-+		printk("acx: EEPROM card ID string check found "
-+			"unknown card: expected 'Global', got '%.*s\'. "
-+			"Please report\n", CARD_EEPROM_ID_SIZE, buffer);
-+	}
-+}
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+/***********************************************************************
-+** acxmem_free_desc_queues
-+**
-+** Releases the queues that have been allocated, the
-+** others have been initialised to NULL so this
-+** function can be used if only part of the queues were allocated.
-+*/
-+
-+void
-+acxmem_free_desc_queues(acx_device_t *adev)
-+{
-+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \
-+        if (ptr) { \
-+                kfree(ptr); \
-+                ptr = NULL; \
-+                size = 0; \
-+        }
-+
-+	FN_ENTER;
-+
-+	ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy);
-+
-+	adev->txdesc_start = NULL;
-+
-+	ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy);
-+
-+	adev->rxdesc_start = NULL;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_delete_dma_regions
-+*/
-+static void
-+acxmem_s_delete_dma_regions(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+	/* disable radio Tx/Rx. Shouldn't we use the firmware commands
-+	 * here instead? Or are we that much down the road that it's no
-+	 * longer possible here? */
-+	/*
-+	 * slave memory interface really doesn't like this.
-+	 */
-+	/*
-+	write_reg16(adev, IO_ACX_ENABLE, 0);
-+	*/
-+
-+	acx_s_msleep(100);
-+
-+	acx_lock(adev, flags);
-+	acxmem_free_desc_queues(adev);
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_probe
-+**
-+** Probe routine called when a PCI device w/ matching ID is found.
-+** Here's the sequence:
-+**   - Allocate the PCI resources.
-+**   - Read the PCMCIA attribute memory to make sure we have a WLAN card
-+**   - Reset the MAC
-+**   - Initialize the dev and wlan data
-+**   - Initialize the MAC
-+**
-+** pdev	- ptr to pci device structure containing info about pci configuration
-+** id	- ptr to the device id entry that matched this device
-+*/
-+static const u16
-+IO_ACX100[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_END_CTL */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x007c, /* IO_ACX_INT_TRIG */
-+	0x0098, /* IO_ACX_IRQ_MASK */
-+	0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00ac, /* IO_ACX_IRQ_ACK */
-+	0x00b0, /* IO_ACX_HINT_TRIG */
-+
-+	0x0104, /* IO_ACX_ENABLE */
-+
-+	0x0250, /* IO_ACX_EEPROM_CTL */
-+	0x0254, /* IO_ACX_EEPROM_ADDR */
-+	0x0258, /* IO_ACX_EEPROM_DATA */
-+	0x025c, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0268, /* IO_ACX_PHY_ADDR */
-+	0x026c, /* IO_ACX_PHY_DATA */
-+	0x0270, /* IO_ACX_PHY_CTL */
-+
-+	0x0290, /* IO_ACX_GPIO_OE */
-+
-+	0x0298, /* IO_ACX_GPIO_OUT */
-+
-+	0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x02ac, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x02d0, /* IO_ACX_EE_START */
-+	0x02d4, /* IO_ACX_SOR_CFG */
-+	0x02d8 /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static const u16
-+IO_ACX111[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_MEM_CP */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x00b4, /* IO_ACX_INT_TRIG */
-+	0x00d4, /* IO_ACX_IRQ_MASK */
-+	/* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */
-+	0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00e8, /* IO_ACX_IRQ_ACK */
-+	0x00ec, /* IO_ACX_HINT_TRIG */
-+
-+	0x01d0, /* IO_ACX_ENABLE */
-+
-+	0x0338, /* IO_ACX_EEPROM_CTL */
-+	0x033c, /* IO_ACX_EEPROM_ADDR */
-+	0x0340, /* IO_ACX_EEPROM_DATA */
-+	0x0344, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0350, /* IO_ACX_PHY_ADDR */
-+	0x0354, /* IO_ACX_PHY_DATA */
-+	0x0358, /* IO_ACX_PHY_CTL */
-+
-+	0x0374, /* IO_ACX_GPIO_OE */
-+
-+	0x037c, /* IO_ACX_GPIO_OUT */
-+
-+	0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x0390, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x0100, /* IO_ACX_EE_START */
-+	0x0104, /* IO_ACX_SOR_CFG */
-+	0x0108, /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static void
-+dummy_netdev_init(struct net_device *ndev) {}
-+
-+/*
-+ * Most of the acx specific pieces of hardware reset.
-+ */
-+static int
-+acxmem_complete_hw_reset (acx_device_t *adev)
-+{
-+	acx111_ie_configoption_t co;
-+
-+	/* NB: read_reg() reads may return bogus data before reset_dev(),
-+	 * since the firmware which directly controls large parts of the I/O
-+	 * registers isn't initialized yet.
-+	 * acx100 seems to be more affected than acx111 */
-+	if (OK != acxmem_s_reset_dev (adev))
-+	  return -1;
-+
-+	if (IS_ACX100(adev)) {
-+		/* ACX100: configopt struct in cmd mailbox - directly after reset */
-+		copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co));
-+	}
-+
-+	if (OK != acx_s_init_mac(adev))
-+	  return -3;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111: configopt struct needs to be queried after full init */
-+		acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS);
-+	}
-+
-+	/*
-+	 * Set up transmit buffer administration
-+	 */
-+	init_acx_txbuf (adev);
-+
-+	/*
-+	 * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor
-+	 * is 3.  It also write protects the EEPROM by writing 1<<9 to GPIO_OUT
-+	 */
-+	if (adev->form_factor == 3) {
-+	  set_regbits (adev, 0x288, 0x01000000);
-+	  set_regbits (adev, 0x298, 1<<9);
-+	}
-+
-+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */
-+	if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version))
-+	  return -2;
-+
-+	acx_s_parse_configoption(adev, &co);
-+	acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */
-+	acx_display_hardware_details(adev);
-+
-+	return 0;
-+}
-+
-+static int acx_init_netdev(struct net_device *ndev, struct device *dev, int base_addr, int addr_size, int irq)
-+{
-+	const char *chip_name;
-+	int result = -EIO;
-+	int err;
-+	u8 chip_type;
-+	acx_device_t *adev = NULL;
-+ 
-+	FN_ENTER;
-+
-+	/* FIXME: prism54 calls pci_set_mwi() here,
-+	 * should we do/support the same? */
-+
-+	/* chiptype is u8 but id->driver_data is ulong
-+	** Works for now (possible values are 1 and 2) */
-+	chip_type = CHIPTYPE_ACX100;
-+	/* acx100 and acx111 have different PCI memory regions */
-+	if (chip_type == CHIPTYPE_ACX100) {
-+		chip_name = "ACX100";
-+	} else if (chip_type == CHIPTYPE_ACX111) {
-+		chip_name = "ACX111";
-+	} else {
-+		printk("acx: unknown chip type 0x%04X\n", chip_type);
-+		goto fail_unknown_chiptype;
-+	}
-+
-+	printk("acx: found %s-based wireless network card\n", chip_name);
-+	log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug);
-+
-+
-+	dev_set_drvdata(dev, ndev);
-+
-+	ether_setup(ndev);
-+
-+	ndev->irq = irq;
-+
-+	ndev->base_addr = base_addr;
-+printk (KERN_INFO "memwinbase=%lx memwinsize=%u\n",memwin.Base,memwin.Size);
-+	if (addr_size == 0 || ndev->irq == 0)
-+		goto fail_hw_params;
-+	ndev->open = &acxmem_e_open;
-+	ndev->stop = &acxmem_e_close;
-+	//pdev->dev.release = &acxmem_e_release;
-+	ndev->hard_start_xmit = &acx_i_start_xmit;
-+	ndev->get_stats = &acx_e_get_stats;
-+#if IW_HANDLER_VERSION <= 5
-+	ndev->get_wireless_stats = &acx_e_get_wireless_stats;
-+#endif
-+	ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
-+	ndev->set_multicast_list = &acxmem_i_set_multicast_list;
-+	ndev->tx_timeout = &acxmem_i_tx_timeout;
-+	ndev->change_mtu = &acx_e_change_mtu;
-+	ndev->watchdog_timeo = 4 * HZ;
-+
-+	adev = ndev2adev(ndev);
-+	spin_lock_init(&adev->lock);	/* initial state: unlocked */
-+	spin_lock_init(&adev->txbuf_lock);
-+	/* We do not start with downed sem: we want PARANOID_LOCKING to work */
-+	sema_init(&adev->sem, 1);	/* initial state: 1 (upped) */
-+	/* since nobody can see new netdev yet, we can as well
-+	** just _presume_ that we're under sem (instead of actually taking it): */
-+	/* acx_sem_lock(adev); */
-+	adev->dev = dev;
-+	adev->ndev = ndev;
-+	adev->dev_type = DEVTYPE_MEM;
-+	adev->chip_type = chip_type;
-+	adev->chip_name = chip_name;
-+	adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111;
-+	adev->membase = (volatile u32 *) ndev->base_addr;
-+	adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size);
-+	/* to find crashes due to weird driver access
-+	 * to unconfigured interface (ifup) */
-+	adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead;
-+
-+#if defined(NONESSENTIAL_FEATURES)
-+	acx_show_card_eeprom_id(adev);
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+#ifdef SET_MODULE_OWNER
-+	SET_MODULE_OWNER(ndev);
-+#endif
-+	// need to fix that @@
-+	SET_NETDEV_DEV(ndev, dev);
-+
-+	log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq);
-+
-+	/* ok, pci setup is finished, now start initializing the card */
-+
-+	if (OK != acxmem_complete_hw_reset (adev))
-+	  goto fail_reset;
-+
-+	/*
-+	 * Set up default things for most of the card settings.
-+	 */
-+	acx_s_set_defaults(adev);
-+
-+	/* Register the card, AFTER everything else has been set up,
-+	 * since otherwise an ioctl could step on our feet due to
-+	 * firmware operations happening in parallel or uninitialized data */
-+	err = register_netdev(ndev);
-+	if (OK != err) {
-+		printk("acx: register_netdev() FAILED: %d\n", err);
-+		goto fail_register_netdev;
-+	}
-+
-+	acx_proc_register_entries(ndev);
-+
-+	/* Now we have our device, so make sure the kernel doesn't try
-+	 * to send packets even though we're not associated to a network yet */
-+	acx_stop_queue(ndev, "on probe");
-+	acx_carrier_off(ndev, "on probe");
-+
-+	/*
-+	 * Set up a default monitor type so that poor combinations of initialization
-+	 * sequences in monitor mode don't end up destroying the hardware type.
-+	 */
-+	adev->monitor_type = ARPHRD_ETHER;
-+
-+	/*
-+	 * Register to receive inetaddr notifier changes.  This will allow us to
-+	 * catch if the user changes the MAC address of the interface.
-+	 */
-+	register_netdevice_notifier(&acx_netdev_notifier);
-+
-+	/* after register_netdev() userspace may start working with dev
-+	 * (in particular, on other CPUs), we only need to up the sem */
-+	/* acx_sem_unlock(adev); */
-+
-+	printk("acx "ACX_RELEASE": net device %s, driver compiled "
-+		"against wireless extensions %d and Linux %s\n",
-+		ndev->name, WIRELESS_EXT, UTS_RELEASE);
-+
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	result = OK;
-+	goto done;
-+
-+	/* error paths: undo everything in reverse order... */
-+
-+fail_register_netdev:
-+
-+	acxmem_s_delete_dma_regions(adev);
-+
-+fail_reset:
-+fail_hw_params:
-+	free_netdev(ndev);
-+fail_unknown_chiptype:
-+
-+
-+done:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_remove
-+**
-+** Shut device down (if not hot unplugged)
-+** and deallocate PCI resources for the acx chip.
-+**
-+** pdev - ptr to PCI device structure containing info about pci configuration
-+*/
-+static int __devexit
-+acxmem_e_remove(struct pcmcia_device *link)
-+{
-+	struct net_device *ndev;
-+	acx_device_t *adev;
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	ndev = ((local_info_t*)link->priv)->ndev;
-+	if (!ndev) {
-+		log(L_DEBUG, "%s: card is unused. Skipping any release code\n",
-+			__func__);
-+		goto end;
-+	}
-+
-+	adev = ndev2adev(ndev);
-+
-+	/* If device wasn't hot unplugged... */
-+	if (adev_present(adev)) {
-+
-+		acx_sem_lock(adev);
-+
-+		/* disable both Tx and Rx to shut radio down properly */
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+
-+#ifdef REDUNDANT
-+		/* put the eCPU to sleep to save power
-+		 * Halting is not possible currently,
-+		 * since not supported by all firmware versions */
-+		acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0);
-+#endif
-+		acx_lock(adev, flags);
-+
-+		/* disable power LED to save power :-) */
-+		log(L_INIT, "switching off power LED to save power\n");
-+		acxmem_l_power_led(adev, 0);
-+
-+		/* stop our eCPU */
-+		if (IS_ACX111(adev)) {
-+			/* FIXME: does this actually keep halting the eCPU?
-+			 * I don't think so...
-+			 */
-+			acxmem_l_reset_mac(adev);
-+		} else {
-+			u16 temp;
-+
-+			/* halt eCPU */
-+			temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1;
-+			write_reg16(adev, IO_ACX_ECPU_CTRL, temp);
-+			write_flush(adev);
-+		}
-+
-+		acx_unlock(adev, flags);
-+
-+		acx_sem_unlock(adev);
-+	}
-+
-+
-+	/*
-+	 * Unregister the notifier chain
-+	 */
-+	unregister_netdevice_notifier(&acx_netdev_notifier);
-+
-+	/* unregister the device to not let the kernel
-+	 * (e.g. ioctls) access a half-deconfigured device
-+	 * NB: this will cause acxmem_e_close() to be called,
-+	 * thus we shouldn't call it under sem! */
-+	log(L_INIT, "removing device %s\n", ndev->name);
-+	unregister_netdev(ndev);
-+
-+	/* unregister_netdev ensures that no references to us left.
-+	 * For paranoid reasons we continue to follow the rules */
-+	acx_sem_lock(adev);
-+
-+	if (adev->dev_state_mask & ACX_STATE_IFACE_UP) {
-+		acxmem_s_down(ndev);
-+		CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	}
-+
-+	acx_proc_unregister_entries(ndev);
-+
-+	acxmem_s_delete_dma_regions(adev);
-+
-+	/* finally, clean up PCI bus state */
-+	if (adev->iobase) iounmap((void *)adev->iobase);
-+
-+	acx_sem_unlock(adev);
-+
-+	/* Free netdev (quite late,
-+	 * since otherwise we might get caught off-guard
-+	 * by a netdev timeout handler execution
-+	 * expecting to see a working dev...) */
-+	free_netdev(ndev);
-+
-+	printk ("e_remove done\n");
-+end:
-+	FN_EXIT0;
-+
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** TODO: PM code needs to be fixed / debugged / tested.
-+*/
-+#ifdef CONFIG_PM
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxmem_e_suspend( struct net_device *ndev, pm_message_t state)
-+#else
-+acxmem_e_suspend( struct net_device *ndev, u32 state)
-+#endif
-+{
-+	FN_ENTER;
-+	acx_device_t *adev;
-+	printk("acx: suspend handler is experimental!\n");
-+	printk("sus: dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		goto end;
-+	// @@ need to get it from link or something like that
-+	adev = ndev2adev(ndev);
-+	printk("sus: adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	netif_device_detach(adev->ndev);	/* this one cannot sleep */
-+	acxmem_s_down(adev->ndev);
-+	/* down() does not set it to 0xffff, but here we really want that */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	acxmem_s_delete_dma_regions(adev);
-+
-+	/*
-+	 * Turn the ACX chip off.
-+	 */
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+static void
-+fw_resumer(struct work_struct *notused)
-+{
-+	acx_device_t *adev;
-+	struct net_device *ndev = resume_ndev;
-+
-+	printk("acx: resume handler is experimental!\n");
-+	printk("rsm: got dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		return;
-+
-+	adev = ndev2adev(ndev);
-+	printk("rsm: got adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	/*
-+	 * Turn on the ACX.
-+	 */
-+
-+	acxmem_complete_hw_reset (adev);
-+
-+	/*
-+	 * done by acx_s_set_defaults for initial startup
-+	 */
-+	acxmem_set_interrupt_mask(adev);
-+
-+	printk ("rsm: bringing up interface\n");
-+	SET_BIT (adev->set_mask, GETSET_ALL);
-+	acxmem_s_up(ndev);
-+	printk("rsm: acx up done\n");
-+
-+	/* now even reload all card parameters as they were before suspend,
-+	 * and possibly be back in the network again already :-) 
-+	 */
-+	/* - most settings updated in acxmem_s_up()
-+	if (ACX_STATE_IFACE_UP & adev->dev_state_mask) {
-+		adev->set_mask = GETSET_ALL;
-+		acx_s_update_card_settings(adev);
-+		printk("rsm: settings updated\n");
-+	}
-+	*/
-+	netif_device_attach(ndev);
-+	printk("rsm: device attached\n");
-+
-+	acx_sem_unlock(adev);
-+}
-+
-+DECLARE_WORK( fw_resume_work, fw_resumer );
-+
-+static int
-+acxmem_e_resume(struct pcmcia_device *link)
-+{
-+	FN_ENTER;
-+
-+	//resume_pdev = pdev;
-+	schedule_work( &fw_resume_work );
-+
-+	FN_EXIT0;
-+	return OK;
-+}
-+#endif /* CONFIG_PM */
-+
-+
-+/***********************************************************************
-+** acxmem_s_up
-+**
-+** This function is called by acxmem_e_open (when ifconfig sets the device as up)
-+**
-+** Side effects:
-+** - Enables on-card interrupt requests
-+** - calls acx_s_start
-+*/
-+
-+static void
-+enable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask);
-+	write_reg16(adev, IO_ACX_FEMR, 0x8000);
-+	adev->irqs_active = 1;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxmem_s_up(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+	enable_acx_irq(adev);
-+	acx_unlock(adev, flags);
-+
-+	/* acx fw < 1.9.3.e has a hardware timer, and older drivers
-+	** used to use it. But we don't do that anymore, our OS
-+	** has reliable software timers */
-+	init_timer(&adev->mgmt_timer);
-+	adev->mgmt_timer.function = acx_i_timer;
-+	adev->mgmt_timer.data = (unsigned long)adev;
-+
-+	/* Need to set ACX_STATE_IFACE_UP first, or else
-+	** timer won't be started by acx_set_status() */
-+	SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_2_STA:
-+		/* actual scan cmd will happen in start() */
-+		acx_set_status(adev, ACX_STATUS_1_SCANNING); break;
-+	case ACX_MODE_3_AP:
-+	case ACX_MODE_MONITOR:
-+		acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break;
-+	}
-+
-+	acx_s_start(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_down
-+**
-+** This disables the netdevice
-+**
-+** Side effects:
-+** - disables on-card interrupt request
-+*/
-+
-+static void
-+disable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+
-+	/* I guess mask is not 0xffff because acx100 won't signal
-+	** cmd completion then (needed for ifup).
-+	** Someone with acx100 please confirm */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	adev->irqs_active = 0;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxmem_s_down(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	/* Disable IRQs first, so that IRQs cannot race with us */
-+	/* then wait until interrupts have finished executing on other CPUs */
-+	acx_lock(adev, flags);
-+	disable_acx_irq(adev);
-+	synchronize_irq(adev->pdev->irq);
-+	acx_unlock(adev, flags);
-+
-+	/* we really don't want to have an asynchronous tasklet disturb us
-+	** after something vital for its job has been shut down, so
-+	** end all remaining work now.
-+	**
-+	** NB: carrier_off (done by set_status below) would lead to
-+	** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK().
-+	** That's why we do FLUSH first.
-+	**
-+	** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK()
-+	** waits for acx_e_after_interrupt_task to complete if it is running
-+	** on another CPU, but acx_e_after_interrupt_task
-+	** will sleep on sem forever, because it is taken by us!
-+	** Work around that by temporary sem unlock.
-+	** This will fail miserably if we'll be hit by concurrent
-+	** iwconfig or something in between. TODO! */
-+	acx_sem_unlock(adev);
-+	FLUSH_SCHEDULED_WORK();
-+	acx_sem_lock(adev);
-+
-+	/* This is possible:
-+	** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task ->
-+	** -> set_status(ASSOCIATED) -> wake_queue()
-+	** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK
-+	** lock/unlock is just paranoia, maybe not needed */
-+	acx_lock(adev, flags);
-+	acx_stop_queue(ndev, "on ifdown");
-+	acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+	acx_unlock(adev, flags);
-+
-+	/* kernel/timer.c says it's illegal to del_timer_sync()
-+	** a timer which restarts itself. We guarantee this cannot
-+	** ever happen because acx_i_timer() never does this if
-+	** status is ACX_STATUS_0_STOPPED */
-+	del_timer_sync(&adev->mgmt_timer);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_open
-+**
-+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP
-+** from clear to set. In other words: ifconfig up.
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxmem_e_open(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_init_task_scheduler(adev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */
-+
-+#if 0
-+	/* request shared IRQ handler */
-+	if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) {
-+		printk("%s: request_irq FAILED\n", ndev->name);
-+		result = -EAGAIN;
-+		goto done;
-+	}
-+	set_irq_type (ndev->irq, IRQT_FALLING);
-+	log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq);
-+#endif
-+
-+	/* ifup device */
-+	acxmem_s_up(ndev);
-+
-+	/* We don't currently have to do anything else.
-+	 * The setup of the MAC should be subsequently completed via
-+	 * the mlme commands.
-+	 * Higher layers know we're ready from dev->start==1 and
-+	 * dev->tbusy==0.  Our rx path knows to pass up received/
-+	 * frames because of dev->flags&IFF_UP is true.
-+	 */
-+done:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_close
-+**
-+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
-+** from set to clear. I.e. called by "ifconfig DEV down"
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxmem_e_close(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* ifdown device */
-+	CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	if (netif_device_present(ndev)) {
-+		acxmem_s_down(ndev);
-+	}
-+
-+	/* disable all IRQs, release shared IRQ handler */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	free_irq(ndev->irq, ndev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */
-+
-+	/* We currently don't have to do anything else.
-+	 * Higher layers know we're not ready from dev->start==0 and
-+	 * dev->tbusy==1.  Our rx path knows to not pass up received
-+	 * frames because of dev->flags&IFF_UP is false.
-+	 */
-+	acx_sem_unlock(adev);
-+
-+	log(L_INIT, "closed device\n");
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_tx_timeout
-+**
-+** Called from network core. Must not sleep!
-+*/
-+static void
-+acxmem_i_tx_timeout(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	unsigned int tx_num_cleaned;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* clean processed tx descs, they may have been completely full */
-+	tx_num_cleaned = acxmem_l_clean_txdesc(adev);
-+
-+	/* nothing cleaned, yet (almost) no free buffers available?
-+	 * --> clean all tx descs, no matter which status!!
-+	 * Note that I strongly suspect that doing emergency cleaning
-+	 * may confuse the firmware. This is a last ditch effort to get
-+	 * ANYTHING to work again...
-+	 *
-+	 * TODO: it's best to simply reset & reinit hw from scratch...
-+	 */
-+	if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) {
-+		printk("%s: FAILED to free any of the many full tx buffers. "
-+			"Switching to emergency freeing. "
-+			"Please report!\n", ndev->name);
-+		acxmem_l_clean_txdesc_emergency(adev);
-+	}
-+
-+	if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status))
-+		acx_wake_queue(ndev, "after tx timeout");
-+
-+	/* stall may have happened due to radio drift, so recalib radio */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+
-+	/* do unimportant work last */
-+	printk("%s: tx timeout!\n", ndev->name);
-+	adev->stats.tx_errors++;
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_set_multicast_list
-+** FIXME: most likely needs refinement
-+*/
-+static void
-+acxmem_i_set_multicast_list(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* firmwares don't have allmulti capability,
-+	 * so just use promiscuous mode instead in this case. */
-+	if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
-+		SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		/* let kernel know in case *we* needed to set promiscuous */
-+		ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI);
-+	} else {
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI);
-+	}
-+
-+	/* cannot update card settings directly here, atomic context */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_l_process_rxdesc
-+**
-+** Called directly and only from the IRQ handler
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_rxbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_rxbuffer(const acx_device_t *adev)
-+{
-+	register const struct rxhostdesc *rxhostdesc;
-+	int i;
-+	/* no FN_ENTER here, we don't want that */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+	if (unlikely(!rxhostdesc)) return;
-+	for (i = 0; i < RX_CNT; i++) {
-+		if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			printk("rx: buf %d full\n", i);
-+		rxhostdesc++;
-+	}
-+}
-+#endif
-+
-+static void
-+acxmem_l_process_rxdesc(acx_device_t *adev)
-+{
-+	register rxhostdesc_t *hostdesc;
-+	register rxdesc_t *rxdesc;
-+	unsigned count, tail;
-+	u32 addr;
-+	u8 Ctl_8;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(acx_debug & L_BUFR))
-+		log_rxbuffer(adev);
-+
-+	/* First, have a loop to determine the first descriptor that's
-+	 * full, just in case there's a mismatch between our current
-+	 * rx_tail and the full descriptor we're supposed to handle. */
-+	tail = adev->rx_tail;
-+	count = RX_CNT;
-+	while (1) {
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		rxdesc = &adev->rxdesc_start[tail];
-+		/* advance tail regardless of outcome of the below test */
-+		tail = (tail + 1) % RX_CNT;
-+
-+		/*
-+		 * Unlike the PCI interface, where the ACX can write directly to
-+		 * the host descriptors, on the slave memory interface we have to
-+		 * pull these.  All we really need to do is check the Ctl_8 field
-+		 * in the rx descriptor on the ACX, which should be 0x11000000 if
-+		 * we should process it.
-+		 */
-+		Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+                if ((Ctl_8 & DESC_CTL_HOSTOWN) &&
-+		    (Ctl_8 & DESC_CTL_ACXDONE))
-+		  break;		/* found it! */
-+
-+		if (unlikely(!--count))	/* hmm, no luck: all descs empty, bail out */
-+			goto end;
-+	}
-+
-+	/* now process descriptors, starting with the first we figured out */
-+	while (1) {
-+		log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n",	tail, Ctl_8);
-+		/*
-+		 * If the ACX has CTL_RECLAIM set on this descriptor there
-+		 * is no buffer associated; it just wants us to tell it to
-+		 * reclaim the memory.
-+		 */
-+		if (!(Ctl_8 & DESC_CTL_RECLAIM)) {
-+
-+		  /*
-+		 * slave interface - pull data now
-+		 */
-+		hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length));
-+
-+		/*
-+		 * hostdesc->data is an rxbuffer_t, which includes header information,
-+		 * but the length in the data packet doesn't.  The header information
-+		 * takes up an additional 12 bytes, so add that to the length we copy.
-+		 */
-+		addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr));
-+		  if (addr) {
-+		    /*
-+		     * How can &(rxdesc->ACXMemPtr) above ever be zero?  Looks like we
-+		     * get that now and then - try to trap it for debug.
-+		     */
-+		    if (addr & 0xffff0000) {
-+		      printk("rxdesc 0x%08x\n", (u32) rxdesc);
-+		      dump_acxmem (adev, 0, 0x10000);
-+		      panic ("Bad access!");
-+		    }
-+		  chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr,
-+					   hostdesc->length +
-+					   (u32) &((rxbuffer_t *)0)->hdr_a3);
-+		acx_l_process_rxbuf(adev, hostdesc->data);
-+		  }
-+		}
-+		else {
-+		  printk ("rx reclaim only!\n");
-+		}
-+
-+		hostdesc->Status = 0;
-+
-+		/*
-+		 * Let the ACX know we're done.
-+		 */
-+		CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN);
-+                SET_BIT (Ctl_8, DESC_CTL_HOSTDONE);
-+		SET_BIT (Ctl_8, DESC_CTL_RECLAIM);
-+		write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8);
-+
-+		/*
-+		 * Now tell the ACX we've finished with the receive buffer so 
-+		 * it can finish the reclaim.
-+		 */
-+		write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC);
-+
-+		/* ok, descriptor is handled, now check the next descriptor */
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		rxdesc = &adev->rxdesc_start[tail];
-+
-+		Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+
-+		/* if next descriptor is empty, then bail out */
-+		if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE))
-+			break;
-+
-+		tail = (tail + 1) % RX_CNT;
-+	}
-+end:
-+	adev->rx_tail = tail;
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_interrupt
-+**
-+** IRQ handler (atomic context, must not sleep, blah, blah)
-+*/
-+
-+/* scan is complete. all frames now on the receive queue are valid */
-+#define INFO_SCAN_COMPLETE      0x0001
-+#define INFO_WEP_KEY_NOT_FOUND  0x0002
-+/* hw has been reset as the result of a watchdog timer timeout */
-+#define INFO_WATCH_DOG_RESET    0x0003
-+/* failed to send out NULL frame from PS mode notification to AP */
-+/* recommended action: try entering 802.11 PS mode again */
-+#define INFO_PS_FAIL            0x0004
-+/* encryption/decryption process on a packet failed */
-+#define INFO_IV_ICV_FAILURE     0x0005
-+
-+/* Info mailbox format:
-+2 bytes: type
-+2 bytes: status
-+more bytes may follow
-+    rumors say about status:
-+	0x0000 info available (set by hw)
-+	0x0001 information received (must be set by host)
-+	0x1000 info available, mailbox overflowed (messages lost) (set by hw)
-+    but in practice we've seen:
-+	0x9000 when we did not set status to 0x0001 on prev message
-+	0x1001 when we did set it
-+	0x0000 was never seen
-+    conclusion: this is really a bitfield:
-+    0x1000 is 'info available' bit
-+    'mailbox overflowed' bit is 0x8000, not 0x1000
-+    value of 0x0000 probably means that there are no messages at all
-+    P.S. I dunno how in hell hw is supposed to notice that messages are lost -
-+    it does NOT clear bit 0x0001, and this bit will probably stay forever set
-+    after we set it once. Let's hope this will be fixed in firmware someday
-+*/
-+
-+static void
-+handle_info_irq(acx_device_t *adev)
-+{
-+#if ACX_DEBUG
-+	static const char * const info_type_msg[] = {
-+		"(unknown)",
-+		"scan complete",
-+		"WEP key not found",
-+		"internal watchdog reset was done",
-+		"failed to send powersave (NULL frame) notification to AP",
-+		"encrypt/decrypt on a packet has failed",
-+		"TKIP tx keys disabled",
-+		"TKIP rx keys disabled",
-+		"TKIP rx: key ID not found",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"TKIP IV value exceeds thresh"
-+	};
-+#endif
-+	u32 info_type, info_status;
-+
-+	info_type = read_slavemem32 (adev, (u32) adev->info_area);
-+
-+	info_status = (info_type >> 16);
-+	info_type = (u16)info_type;
-+
-+	/* inform fw that we have read this info message */
-+	write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000);
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK);
-+	write_flush(adev);
-+
-+	log(L_CTL, "info_type:%04X info_status:%04X\n",
-+			info_type, info_status);
-+
-+	log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n",
-+		info_status, info_type,
-+		info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ?
-+				0 : info_type]
-+	);
-+}
-+
-+
-+static void
-+log_unusual_irq(u16 irqtype) {
-+	/*
-+	if (!printk_ratelimit())
-+		return;
-+	*/
-+
-+	printk("acx: got");
-+	if (irqtype & HOST_INT_TX_XFER) {
-+		printk(" Tx_Xfer");
-+	}
-+	if (irqtype & HOST_INT_RX_COMPLETE) {
-+		printk(" Rx_Complete");
-+	}
-+	if (irqtype & HOST_INT_DTIM) {
-+		printk(" DTIM");
-+	}
-+	if (irqtype & HOST_INT_BEACON) {
-+		printk(" Beacon");
-+	}
-+	if (irqtype & HOST_INT_TIMER) {
-+		log(L_IRQ, " Timer");
-+	}
-+	if (irqtype & HOST_INT_KEY_NOT_FOUND) {
-+		printk(" Key_Not_Found");
-+	}
-+	if (irqtype & HOST_INT_IV_ICV_FAILURE) {
-+		printk(" IV_ICV_Failure (crypto)");
-+	}
-+		/* HOST_INT_CMD_COMPLETE  */
-+		/* HOST_INT_INFO          */
-+	if (irqtype & HOST_INT_OVERFLOW) {
-+		printk(" Overflow");
-+	}
-+	if (irqtype & HOST_INT_PROCESS_ERROR) {
-+		printk(" Process_Error");
-+	}
-+		/* HOST_INT_SCAN_COMPLETE */
-+	if (irqtype & HOST_INT_FCS_THRESHOLD) {
-+		printk(" FCS_Threshold");
-+	}
-+	if (irqtype & HOST_INT_UNKNOWN) {
-+		printk(" Unknown");
-+	}
-+	printk(" IRQ(s)\n");
-+}
-+
-+
-+static void
-+update_link_quality_led(acx_device_t *adev)
-+{
-+	int qual;
-+
-+	qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise);
-+	if (qual > adev->brange_max_quality)
-+		qual = adev->brange_max_quality;
-+
-+	if (time_after(jiffies, adev->brange_time_last_state_change +
-+				(HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) {
-+		acxmem_l_power_led(adev, (adev->brange_last_state == 0));
-+		adev->brange_last_state ^= 1; /* toggle */
-+		adev->brange_time_last_state_change = jiffies;
-+	}
-+}
-+
-+
-+#define MAX_IRQLOOPS_PER_JIFFY  (20000/HZ) /* a la orinoco.c */
-+
-+static irqreturn_t
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxmem_i_interrupt(int irq, void *dev_id)
-+#else
-+acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	unsigned long flags;
-+	unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY;
-+	register u16 irqtype;
-+	u16 unmasked;
-+
-+	adev = ndev2adev((struct net_device*)dev_id);
-+
-+	/* LOCKING: can just spin_lock() since IRQs are disabled anyway.
-+	 * I am paranoid */
-+	acx_lock(adev, flags);
-+
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	if (unlikely(0xffff == unmasked)) {
-+		/* 0xffff value hints at missing hardware,
-+		 * so don't do anything.
-+		 * Not very clean, but other drivers do the same... */
-+		log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n");
-+		goto none;
-+	}
-+
-+	/* We will check only "interesting" IRQ types */
-+	irqtype = unmasked & ~adev->irq_mask;
-+	if (!irqtype) {
-+		/* We are on a shared IRQ line and it wasn't our IRQ */
-+		log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n",
-+			unmasked, adev->irq_mask);
-+		goto none;
-+	}
-+
-+	/* Done here because IRQ_NONEs taking three lines of log
-+	** drive me crazy */
-+	FN_ENTER;
-+
-+#define IRQ_ITERATE 1
-+#if IRQ_ITERATE
-+if (jiffies != adev->irq_last_jiffies) {
-+	adev->irq_loops_this_jiffy = 0;
-+	adev->irq_last_jiffies = jiffies;
-+}
-+
-+/* safety condition; we'll normally abort loop below
-+ * in case no IRQ type occurred */
-+while (likely(--irqcount)) {
-+#endif
-+	/* ACK all IRQs ASAP */
-+	write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff);
-+
-+	log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n",
-+				unmasked, adev->irq_mask, irqtype);
-+
-+	/* Handle most important IRQ types first */
-+	if (irqtype & HOST_INT_RX_DATA) {
-+		log(L_IRQ, "got Rx_Data IRQ\n");
-+		acxmem_l_process_rxdesc(adev);
-+	}
-+	if (irqtype & HOST_INT_TX_COMPLETE) {
-+		log(L_IRQ, "got Tx_Complete IRQ\n");
-+		/* don't clean up on each Tx complete, wait a bit
-+		 * unless we're going towards full, in which case
-+		 * we do it immediately, too (otherwise we might lockup
-+		 * with a full Tx buffer if we go into
-+		 * acxmem_l_clean_txdesc() at a time when we won't wakeup
-+		 * the net queue in there for some reason...) */
-+		if (adev->tx_free <= TX_START_CLEAN) {
-+#if TX_CLEANUP_IN_SOFTIRQ
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP);
-+#else
-+			acxmem_l_clean_txdesc(adev);
-+#endif
-+		}
-+	}
-+
-+	/* Less frequent ones */
-+	if (irqtype & (0
-+		| HOST_INT_CMD_COMPLETE
-+		| HOST_INT_INFO
-+		| HOST_INT_SCAN_COMPLETE
-+	)) {
-+		if (irqtype & HOST_INT_CMD_COMPLETE) {
-+			log(L_IRQ, "got Command_Complete IRQ\n");
-+			/* save the state for the running issue_cmd() */
-+			SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE);
-+		}
-+		if (irqtype & HOST_INT_INFO) {
-+			handle_info_irq(adev);
-+		}
-+		if (irqtype & HOST_INT_SCAN_COMPLETE) {
-+			log(L_IRQ, "got Scan_Complete IRQ\n");
-+			/* need to do that in process context */
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN);
-+			/* remember that fw is not scanning anymore */
-+			SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+		}
-+	}
-+
-+	/* These we just log, but either they happen rarely
-+	 * or we keep them masked out */
-+	if (irqtype & (0
-+		/* | HOST_INT_RX_DATA */
-+		/* | HOST_INT_TX_COMPLETE   */
-+		| HOST_INT_TX_XFER
-+		| HOST_INT_RX_COMPLETE
-+		| HOST_INT_DTIM
-+		| HOST_INT_BEACON
-+		| HOST_INT_TIMER
-+		| HOST_INT_KEY_NOT_FOUND
-+		| HOST_INT_IV_ICV_FAILURE
-+		/* | HOST_INT_CMD_COMPLETE  */
-+		/* | HOST_INT_INFO          */
-+		| HOST_INT_OVERFLOW
-+		| HOST_INT_PROCESS_ERROR
-+		/* | HOST_INT_SCAN_COMPLETE */
-+		| HOST_INT_FCS_THRESHOLD
-+		| HOST_INT_UNKNOWN
-+	)) {
-+		log_unusual_irq(irqtype);
-+	}
-+
-+#if IRQ_ITERATE
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	irqtype = unmasked & ~adev->irq_mask;
-+	/* Bail out if no new IRQ bits or if all are masked out */
-+	if (!irqtype)
-+		break;
-+
-+	if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) {
-+		printk(KERN_ERR "acx: too many interrupts per jiffy!\n");
-+		/* Looks like card floods us with IRQs! Try to stop that */
-+		write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+		/* This will short-circuit all future attempts to handle IRQ.
-+		 * We cant do much more... */
-+		adev->irq_mask = 0;
-+		break;
-+	}
-+}
-+#endif
-+	/* Routine to perform blink with range */
-+	if (unlikely(adev->led_power == 2))
-+		update_link_quality_led(adev);
-+
-+/* handled: */
-+	/* write_flush(adev); - not needed, last op was read anyway */
-+	acx_unlock(adev, flags);
-+	FN_EXIT0;
-+	return IRQ_HANDLED;
-+
-+none:
-+	acx_unlock(adev, flags);
-+	return IRQ_NONE;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_power_led
-+*/
-+void
-+acxmem_l_power_led(acx_device_t *adev, int enable)
-+{
-+	u16 gpio_pled =	IS_ACX111(adev) ? 0x0040 : 0x0800;
-+
-+	/* A hack. Not moving message rate limiting to adev->xxx
-+	 * (it's only a debug message after all) */
-+	static int rate_limit = 0;
-+
-+	if (rate_limit++ < 3)
-+		log(L_IOCTL, "Please report in case toggling the power "
-+				"LED doesn't work for your card!\n");
-+	if (enable)
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled);
-+	else
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled);
-+}
-+
-+
-+/***********************************************************************
-+** Ioctls
-+*/
-+
-+/***********************************************************************
-+*/
-+int
-+acx111pci_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+#if ACX_DEBUG > 1
-+	acx_device_t *adev = ndev2adev(ndev);
-+	rxdesc_t *rxdesc;
-+	txdesc_t *txdesc;
-+	rxhostdesc_t *rxhostdesc;
-+	txhostdesc_t *txhostdesc;
-+	struct acx111_ie_memoryconfig memconf;
-+	struct acx111_ie_queueconfig queueconf;
-+	unsigned long flags;
-+	int i;
-+	char memmap[0x34];
-+	char rxconfig[0x8];
-+	char fcserror[0x8];
-+	char ratefallback[0x5];
-+
-+	if ( !(acx_debug & (L_IOCTL|L_DEBUG)) )
-+		return OK;
-+	/* using printk() since we checked debug flag already */
-+
-+	acx_sem_lock(adev);
-+
-+	if (!IS_ACX111(adev)) {
-+		printk("acx111-specific function called "
-+			"with non-acx111 chip, aborting\n");
-+		goto end_ok;
-+	}
-+
-+	/* get Acx111 Memory Configuration */
-+	memset(&memconf, 0, sizeof(memconf));
-+	/* BTW, fails with 12 (Write only) error code.
-+	** Retained for easy testing of issue_cmd error handling :) */
-+	printk ("Interrogating queue config\n");
-+	acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG);
-+	printk ("done with queue config\n");
-+
-+	/* get Acx111 Queue Configuration */
-+	memset(&queueconf, 0, sizeof(queueconf));
-+	printk ("Interrogating mem config options\n");
-+	acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS);
-+	printk ("done with mem config options\n");
-+
-+	/* get Acx111 Memory Map */
-+	memset(memmap, 0, sizeof(memmap));
-+	printk ("Interrogating mem map\n");
-+	acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP);
-+	printk ("done with mem map\n");
-+
-+	/* get Acx111 Rx Config */
-+	memset(rxconfig, 0, sizeof(rxconfig));
-+	printk ("Interrogating rxconfig\n");
-+	acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG);
-+	printk ("done with queue rxconfig\n");
-+
-+	/* get Acx111 fcs error count */
-+	memset(fcserror, 0, sizeof(fcserror));
-+	printk ("Interrogating fcs err count\n");
-+	acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT);
-+	printk ("done with err count\n");
-+
-+	/* get Acx111 rate fallback */
-+	memset(ratefallback, 0, sizeof(ratefallback));
-+	printk ("Interrogating rate fallback\n");
-+	acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK);
-+	printk ("done with rate fallback\n");
-+
-+	/* force occurrence of a beacon interrupt */
-+	/* TODO: comment why is this necessary */
-+	write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON);
-+
-+	/* dump Acx111 Mem Configuration */
-+	printk("dump mem config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Number of stations: %1X\n"
-+		"Memory block size: %1X\n"
-+		"tx/rx memory block allocation: %1X\n"
-+		"count rx: %X / tx: %X queues\n"
-+		"options %1X\n"
-+		"fragmentation %1X\n"
-+		"Rx Queue 1 Count Descriptors: %X\n"
-+		"Rx Queue 1 Host Memory Start: %X\n"
-+		"Tx Queue 1 Count Descriptors: %X\n"
-+		"Tx Queue 1 Attributes: %X\n",
-+		memconf.len, (int) sizeof(memconf),
-+		memconf.no_of_stations,
-+		memconf.memory_block_size,
-+		memconf.tx_rx_memory_block_allocation,
-+		memconf.count_rx_queues, memconf.count_tx_queues,
-+		memconf.options,
-+		memconf.fragmentation,
-+		memconf.rx_queue1_count_descs,
-+	acx2cpu(memconf.rx_queue1_host_rx_start),
-+		memconf.tx_queue1_count_descs,
-+		memconf.tx_queue1_attributes);
-+
-+	/* dump Acx111 Queue Configuration */
-+	printk("dump queue head:\n"
-+		"data read: %d, struct size: %d\n"
-+		"tx_memory_block_address (from card): %X\n"
-+		"rx_memory_block_address (from card): %X\n"
-+		"rx1_queue address (from card): %X\n"
-+		"tx1_queue address (from card): %X\n"
-+		"tx1_queue attributes (from card): %X\n",
-+		queueconf.len, (int) sizeof(queueconf),
-+		queueconf.tx_memory_block_address,
-+		queueconf.rx_memory_block_address,
-+		queueconf.rx1_queue_address,
-+		queueconf.tx1_queue_address,
-+		queueconf.tx1_attributes);
-+
-+	/* dump Acx111 Mem Map */
-+	printk("dump mem map:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Code start: %X\n"
-+		"Code end: %X\n"
-+		"WEP default key start: %X\n"
-+		"WEP default key end: %X\n"
-+		"STA table start: %X\n"
-+		"STA table end: %X\n"
-+		"Packet template start: %X\n"
-+		"Packet template end: %X\n"
-+		"Queue memory start: %X\n"
-+		"Queue memory end: %X\n"
-+		"Packet memory pool start: %X\n"
-+		"Packet memory pool end: %X\n"
-+		"iobase: %p\n"
-+		"iobase2: %p\n",
-+		*((u16 *)&memmap[0x02]), (int) sizeof(memmap),
-+		*((u32 *)&memmap[0x04]),
-+		*((u32 *)&memmap[0x08]),
-+		*((u32 *)&memmap[0x0C]),
-+		*((u32 *)&memmap[0x10]),
-+		*((u32 *)&memmap[0x14]),
-+		*((u32 *)&memmap[0x18]),
-+		*((u32 *)&memmap[0x1C]),
-+		*((u32 *)&memmap[0x20]),
-+		*((u32 *)&memmap[0x24]),
-+		*((u32 *)&memmap[0x28]),
-+		*((u32 *)&memmap[0x2C]),
-+		*((u32 *)&memmap[0x30]),
-+		adev->iobase,
-+		adev->iobase2);
-+
-+	/* dump Acx111 Rx Config */
-+	printk("dump rx config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"rx config: %X\n"
-+		"rx filter config: %X\n",
-+		*((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig),
-+		*((u16 *)&rxconfig[0x04]),
-+		*((u16 *)&rxconfig[0x06]));
-+
-+	/* dump Acx111 fcs error */
-+	printk("dump fcserror:\n"
-+		"data read: %d, struct size: %d\n"
-+		"fcserrors: %X\n",
-+		*((u16 *)&fcserror[0x02]), (int) sizeof(fcserror),
-+		*((u32 *)&fcserror[0x04]));
-+
-+	/* dump Acx111 rate fallback */
-+	printk("dump rate fallback:\n"
-+		"data read: %d, struct size: %d\n"
-+		"ratefallback: %X\n",
-+		*((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback),
-+		*((u8 *)&ratefallback[0x04]));
-+
-+	/* protect against IRQ */
-+	acx_lock(adev, flags);
-+
-+	/* dump acx111 internal rx descriptor ring buffer */
-+	rxdesc = adev->rxdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump internal rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n"
-+			"RxStatus (dynamic) 0x%X\n"
-+			"Mod/Pre (dynamic) 0x%X\n",
-+			i,
-+			rxdesc,
-+			acx2cpu(rxdesc->pNextDesc),
-+			acx2cpu(rxdesc->ACXMemPtr),
-+			rxdesc->Ctl_8,
-+			rxdesc->rate,
-+			rxdesc->error,
-+			rxdesc->SNR);
-+		rxdesc++;
-+	}
-+
-+	/* dump host rx descriptor ring buffer */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxhostdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump host rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			rxhostdesc,
-+			acx2cpu(rxhostdesc->data_phy),
-+			rxhostdesc->data_offset,
-+			le16_to_cpu(rxhostdesc->Ctl_16),
-+			le16_to_cpu(rxhostdesc->length),
-+			acx2cpu(rxhostdesc->desc_phy_next),
-+			rxhostdesc->Status);
-+		rxhostdesc++;
-+	}
-+
-+	/* dump acx111 internal tx descriptor ring buffer */
-+	txdesc = adev->txdesc_start;
-+
-+	/* loop over complete transmit pool */
-+	if (txdesc) for (i = 0; i < TX_CNT; i++) {
-+		printk("\ndump internal txdesc %d:\n"
-+			"size 0x%X\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"host mem pointer (dynamic) 0x%X\n"
-+			"length (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"CTL2 (dynamic) 0x%X\n"
-+			"Status (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n",
-+			i,
-+			(int) sizeof(struct txdesc),
-+			txdesc,
-+			acx2cpu(txdesc->pNextDesc),
-+			acx2cpu(txdesc->AcxMemPtr),
-+			acx2cpu(txdesc->HostMemPtr),
-+			le16_to_cpu(txdesc->total_length),
-+			txdesc->Ctl_8,
-+			txdesc->Ctl2_8, txdesc->error,
-+			txdesc->u.r1.rate);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+
-+	/* dump host tx descriptor ring buffer */
-+
-+	txhostdesc = adev->txhostdesc_start;
-+
-+	/* loop over complete host send pool */
-+	if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) {
-+		printk("\ndump host txdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			txhostdesc,
-+			acx2cpu(txhostdesc->data_phy),
-+			txhostdesc->data_offset,
-+			le16_to_cpu(txhostdesc->Ctl_16),
-+			le16_to_cpu(txhostdesc->length),
-+			acx2cpu(txhostdesc->desc_phy_next),
-+			le32_to_cpu(txhostdesc->Status));
-+		txhostdesc++;
-+	}
-+
-+	/* write_reg16(adev, 0xb4, 0x4); */
-+
-+	acx_unlock(adev, flags);
-+end_ok:
-+
-+	acx_sem_unlock(adev);
-+#endif /* ACX_DEBUG */
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100mem_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	u16 gpio_old;
-+
-+	if (!IS_ACX100(adev)) {
-+		/* WARNING!!!
-+		 * Removing this check *might* damage
-+		 * hardware, since we're tweaking GPIOs here after all!!!
-+		 * You've been warned...
-+		 * WARNING!!! */
-+		printk("acx: sorry, setting bias level for non-acx100 "
-+			"is not supported yet\n");
-+		return OK;
-+	}
-+
-+	if (*extra > 7)	{
-+		printk("acx: invalid bias parameter, range is 0-7\n");
-+		return -EINVAL;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	/* Need to lock accesses to [IO_ACX_GPIO_OUT]:
-+	 * IRQ handler uses it to update LED */
-+	acx_lock(adev, flags);
-+	gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT);
-+	write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8));
-+	acx_unlock(adev, flags);
-+
-+	log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old);
-+	printk("%s: PHY power amplifier bias: old:%d, new:%d\n",
-+		ndev->name,
-+		(gpio_old & 0x0700) >> 8, (unsigned char)*extra);
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+/***************************************************************
-+** acxmem_l_alloc_tx
-+** Actually returns a txdesc_t* ptr
-+**
-+** FIXME: in case of fragments, should allocate multiple descrs
-+** after figuring out how many we need and whether we still have
-+** sufficiently many.
-+*/
-+tx_t*
-+acxmem_l_alloc_tx(acx_device_t *adev)
-+{
-+	struct txdesc *txdesc;
-+	unsigned head;
-+	u8 ctl8;
-+	static int txattempts = 0;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!adev->tx_free)) {
-+		printk("acx: BUG: no free txdesc left\n");
-+		/*
-+		 * Probably the ACX ignored a transmit attempt and now there's a packet
-+		 * sitting in the queue we think should be transmitting but the ACX doesn't
-+		 * know about.
-+		 * On the first pass, send the ACX a TxProc interrupt to try moving
-+		 * things along, and if that doesn't work (ie, we get called again) completely
-+		 * flush the transmit queue.
-+		 */
-+		if (txattempts < 10) {
-+		  txattempts++;
-+		  printk ("acx: trying to wake up ACX\n");
-+		  write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+		  write_flush(adev);		}
-+		else  {
-+		  txattempts = 0;
-+		  printk ("acx: flushing transmit queue.\n");
-+		  acxmem_l_clean_txdesc_emergency (adev);
-+		}
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/*
-+	 * Make a quick check to see if there is transmit buffer space on
-+	 * the ACX.  This can't guarantee there is enough space for the packet
-+	 * since we don't yet know how big it is, but it will prevent at least some
-+	 * annoyances.
-+	 */
-+	if (!adev->acx_txbuf_blocks_free) {
-+	  txdesc = NULL;
-+	  goto end;
-+	}
-+
-+	head = adev->tx_head;
-+	/*
-+	 * txdesc points to ACX memory
-+	 */
-+	txdesc = get_txdesc(adev, head);
-+	ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+
-+	/* 
-+	 * If we don't own the buffer (HOSTOWN) it is certainly not free; however,
-+	 * we may have previously thought we had enough memory to send
-+	 * a packet, allocated the buffer then gave up when we found not enough
-+	 * transmit buffer space on the ACX. In that case, HOSTOWN and
-+	 * ACXDONE will both be set.
-+	 */
-+	if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) {
-+		/* whoops, descr at current index is not free, so probably
-+		 * ring buffer already full */
-+                printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find "
-+                        "free txdesc\n", head, ctl8);
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/* Needed in case txdesc won't be eventually submitted for tx */
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN);
-+
-+	adev->tx_free--;
-+	log(L_BUFT, "tx: got desc %u, %u remain\n",
-+			head, adev->tx_free);
-+	/* Keep a few free descs between head and tail of tx ring.
-+	** It is not absolutely needed, just feels safer */
-+	if (adev->tx_free < TX_STOP_QUEUE) {
-+		log(L_BUF, "stop queue (%u tx desc left)\n",
-+				adev->tx_free);
-+		acx_stop_queue(adev->ndev, NULL);
-+	}
-+
-+	/* returning current descriptor, so advance to next free one */
-+	adev->tx_head = (head + 1) % TX_CNT;
-+end:
-+	FN_EXIT0;
-+
-+	return (tx_t*)txdesc;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_l_dealloc_tx
-+** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque);
-+ transmit descriptor.  The ACX
-+** can get confused if we skip transmit descriptors in the queue,
-+** so when we don't need a descriptor return it to its original
-+** state and move the queue head pointer back.
-+**
-+*/
-+void
-+acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque)
-+{
-+  /*
-+   * txdesc is the address of the descriptor on the ACX.
-+   */
-+  txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+  txdesc_t tmptxdesc;
-+  int index;
-+
-+  memset (&tmptxdesc, 0, sizeof(tmptxdesc));
-+  tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG;
-+  tmptxdesc.u.r1.rate = 0x0a;
-+
-+  /*
-+   * Clear out all of the transmit descriptor except for the next pointer
-+   */
-+  copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr),
-+		    (u8 *) &(tmptxdesc.HostMemPtr),
-+		    sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc));
-+  
-+  /*
-+   * This is only called immediately after we've allocated, so we should
-+   * be able to set the head back to this descriptor.
-+   */
-+  index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size;
-+  printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index);
-+  adev->tx_head = index;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void*
-+acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque)
-+{
-+	return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_tx_data
-+**
-+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx).
-+** Can be called from acx_i_start_xmit (data frames from net core).
-+**
-+** FIXME: in case of fragments, should loop over the number of
-+** pre-allocated tx descrs, properly setting up transfer data and
-+** CTL_xxx flags according to fragment number.
-+*/
-+void
-+acxmem_update_queue_indicator (acx_device_t *adev, int txqueue)
-+{
-+#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE
-+  u32 indicator;
-+  unsigned long flags;
-+  int count;
-+
-+  /*
-+   * Can't handle an interrupt while we're fiddling with the ACX's lock,
-+   * according to TI.  The ACX is supposed to hold fw_lock for at most
-+   * 500ns.
-+   */
-+  local_irq_save (flags);
-+
-+  /*
-+   * Wait for ACX to release the lock (at most 500ns).
-+   */
-+  count = 0;
-+  while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock))
-+	 && (count++ < 50)) {
-+    ndelay (10);
-+  }
-+  if (count < 50) {
-+
-+    /*
-+     * Take out the host lock - anything non-zero will work, so don't worry about
-+     * be/le
-+     */
-+    write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1);
-+
-+    /*
-+     * Avoid a race condition
-+     */
-+    count = 0;
-+    while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock))
-+	   && (count++ < 50)) {
-+      ndelay (10);
-+    }
-+
-+    if (count < 50) {
-+      /*
-+       * Mark the queue active
-+       */
-+      indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator));
-+      indicator |= cpu_to_le32 (1 << txqueue);
-+      write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator);
-+    }
-+
-+    /*
-+     * Release the host lock
-+     */
-+    write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0);
-+
-+  }
-+
-+  /*
-+   * Restore interrupts
-+   */
-+  local_irq_restore (flags);
-+#endif
-+}
-+
-+void
-+acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len)
-+{
-+  /*
-+   * txdesc is the address on the ACX
-+   */
-+	txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+	txhostdesc_t *hostdesc1, *hostdesc2;
-+	client_t *clt;
-+	u16 rate_cur;
-+	u8 Ctl_8, Ctl2_8;
-+	u32 addr;
-+
-+	FN_ENTER;
-+	/* fw doesn't tx such packets anyhow */
-+	if (unlikely(len < WLAN_HDR_A3_LEN))
-+		goto end;
-+
-+	hostdesc1 = get_txhostdesc(adev, txdesc);
-+	/* modify flag status in separate variable to be able to write it back
-+	 * in one big swoop later (also in order to have less device memory
-+	 * accesses) */
-+	Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+	Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */
-+
-+	hostdesc2 = hostdesc1 + 1;
-+
-+	/* DON'T simply set Ctl field to 0 here globally,
-+	 * it needs to maintain a consistent flag status (those are state flags!!),
-+	 * otherwise it may lead to severe disruption. Only set or reset particular
-+	 * flags at the exact moment this is needed... */
-+
-+	/* let chip do RTS/CTS handshaking before sending
-+	 * in case packet size exceeds threshold */
-+	if (len > adev->rts_threshold)
-+		SET_BIT(Ctl2_8, DESC_CTL2_RTS);
-+	else
-+		CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_3_AP:
-+		clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1);
-+		break;
-+	case ACX_MODE_2_STA:
-+		clt = adev->ap_client;
-+		break;
-+#if 0
-+/* testing was done on acx111: */
-+	case ACX_MODE_MONITOR:
-+		SET_BIT(Ctl2_8, 0
-+/* sends CTS to self before packet */
-+			+ DESC_CTL2_SEQ		/* don't increase sequence field */
-+/* not working (looks like good fcs is still added) */
-+			+ DESC_CTL2_FCS		/* don't add the FCS */
-+/* not tested */
-+			+ DESC_CTL2_MORE_FRAG
-+/* not tested */
-+			+ DESC_CTL2_RETRY	/* don't increase retry field */
-+/* not tested */
-+			+ DESC_CTL2_POWER	/* don't increase power mgmt. field */
-+/* no effect */
-+			+ DESC_CTL2_WEP		/* encrypt this frame */
-+/* not tested */
-+			+ DESC_CTL2_DUR		/* don't increase duration field */
-+			);
-+		/* fallthrough */
-+#endif
-+	default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */
-+		clt = NULL;
-+		break;
-+	}
-+
-+	rate_cur = clt ? clt->rate_cur : adev->rate_bcast;
-+	if (unlikely(!rate_cur)) {
-+		printk("acx: driver bug! bad ratemask\n");
-+		goto end;
-+	}
-+
-+	/* used in tx cleanup routine for auto rate and accounting: */
-+	put_txcr(adev, txdesc, clt, rate_cur);
-+
-+	write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len));
-+	hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN);
-+	if (IS_ACX111(adev)) {
-+		/* note that if !txdesc->do_auto, txrate->cur
-+		** has only one nonzero bit */
-+		txdesc->u.r2.rate111 = cpu_to_le16(
-+			rate_cur
-+			/* WARNING: I was never able to make it work with prism54 AP.
-+			** It was falling down to 1Mbit where shortpre is not applicable,
-+			** and not working at all at "5,11 basic rates only" setting.
-+			** I even didn't see tx packets in radio packet capture.
-+			** Disabled for now --vda */
-+			/*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */
-+			);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+			/* should add this to rate111 above as necessary */
-+			| (clt->pbcc511 ? RATE111_PBCC511 : 0)
-+#endif
-+		hostdesc1->length = cpu_to_le16(len);
-+	} else { /* ACX100 */
-+		u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100;
-+		write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+		if (clt->pbcc511) {
-+			if (n == RATE100_5 || n == RATE100_11)
-+				n |= RATE100_PBCC511;
-+		}
-+
-+		if (clt->shortpre && (clt->cur != RATE111_1))
-+			SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */
-+#endif
-+		/* set autodma and reclaim and 1st mpdu */
-+		SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG);
-+
-+#if ACX_FRAGMENTATION
-+		/* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */
-+#endif
-+		hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN);
-+
-+		/*
-+		 * Since we're not using autodma copy the packet data to the acx now.
-+		 * Even host descriptors point to the packet header, and the odd indexed
-+		 * descriptor following points to the packet data.
-+		 *
-+		 * The first step is to find free memory in the ACX transmit buffers.
-+		 * They don't necessarily map one to one with the transmit queue entries,
-+		 * so search through them starting just after the last one used.
-+		 */
-+		addr = allocate_acx_txbuf_space (adev, len);
-+		if (addr) {
-+		  chaincopy_to_slavemem (adev, addr, hostdesc1->data, len);
-+		}
-+		else {
-+		  /*
-+		   * Bummer.  We thought we might have enough room in the transmit
-+		   * buffers to send this packet, but it turns out we don't.  alloc_tx
-+		   * has already marked this transmit descriptor as HOSTOWN and ACXDONE,
-+		   * which means the ACX will hang when it gets to this descriptor unless
-+		   * we do something about it.  Having a bubble in the transmit queue just
-+		   * doesn't seem to work, so we have to reset this transmit queue entry's
-+		   * state to its original value and back up our head pointer to point
-+		   * back to this entry.
-+		   */
-+		  hostdesc1->length = 0;
-+		  hostdesc2->length = 0;
-+		  write_slavemem16 (adev, (u32) &(txdesc->total_length), 0);
-+		  write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG);
-+		  adev->tx_head  = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size;
-+		  goto end;
-+		}
-+		/*
-+		 * Tell the ACX where the packet is.
-+		 */
-+		write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr);
-+
-+	}
-+	/* don't need to clean ack/rts statistics here, already
-+	 * done on descr cleanup */
-+
-+	/* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors
-+	 * are now owned by the acx100; do this as LAST operation */
-+	CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN);
-+	/* flush writes before we release hostdesc to the adapter here */
-+	//wmb();
-+
-+	/* write back modified flags */
-+	/*
-+	 * At this point Ctl_8 should just be FIRSTFRAG
-+	 */
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8);
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8);
-+	/* unused: txdesc->tx_time = cpu_to_le32(jiffies); */
-+
-+	/*
-+	 * Update the queue indicator to say there's data on the first queue.
-+	 */
-+	acxmem_update_queue_indicator (adev, 0);
-+
-+	/* flush writes before we tell the adapter that it's its turn now */
-+	mmiowb();
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+	write_flush(adev);
-+
-+	/* log the packet content AFTER sending it,
-+	 * in order to not delay sending any further than absolutely needed
-+	 * Do separate logs for acx100/111 to have human-readable rates */
-+	if (unlikely(acx_debug & (L_XFER|L_DATA))) {
-+		u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc;
-+		if (IS_ACX111(adev))
-+			printk("tx: pkt (%s): len %d "
-+				"rate %04X%s status %u\n",
-+				acx_get_packet_type_string(le16_to_cpu(fc)), len,
-+				le16_to_cpu(txdesc->u.r2.rate111),
-+				(le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "",
-+				adev->status);
-+		else
-+			printk("tx: pkt (%s): len %d rate %03u%s status %u\n",
-+				acx_get_packet_type_string(fc), len,
-+				read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)),
-+				(Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "",
-+				adev->status);
-+
-+		if (acx_debug & L_DATA) {
-+			printk("tx: 802.11 [%d]: ", len);
-+			acx_dump_bytes(hostdesc1->data, len);
-+		}
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_clean_txdesc
-+**
-+** This function resets the txdescs' status when the ACX100
-+** signals the TX done IRQ (txdescs have been processed), starting with
-+** the pool index of the descriptor which we would use next,
-+** in order to make sure that we can be as fast as possible
-+** in filling new txdescs.
-+** Everytime we get called we know where the next packet to be cleaned is.
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_txbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_txbuffer(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+	u8 Ctl_8;
-+
-+	/* no FN_ENTER here, we don't want that */
-+	/* no locks here, since it's entirely non-critical code */
-+	txdesc = adev->txdesc_start;
-+	if (unlikely(!txdesc)) return;
-+	printk("tx: desc->Ctl8's:");
-+	for (i = 0; i < TX_CNT; i++) {
-+	  Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+		printk(" %02X", Ctl_8);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+	printk("\n");
-+}
-+#endif
-+
-+
-+static void
-+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger)
-+{
-+	const char *err = "unknown error";
-+
-+	/* hmm, should we handle this as a mask
-+	 * of *several* bits?
-+	 * For now I think only caring about
-+	 * individual bits is ok... */
-+	switch (error) {
-+	case 0x01:
-+		err = "no Tx due to error in other fragment";
-+		adev->wstats.discard.fragment++;
-+		break;
-+	case 0x02:
-+		err = "Tx aborted";
-+		adev->stats.tx_aborted_errors++;
-+		break;
-+	case 0x04:
-+		err = "Tx desc wrong parameters";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x08:
-+		err = "WEP key not found";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x10:
-+		err = "MSDU lifetime timeout? - try changing "
-+				"'iwconfig retry lifetime XXX'";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x20:
-+		err = "excessive Tx retries due to either distance "
-+			"too high or unable to Tx or Tx frame error - "
-+			"try changing 'iwconfig txpower XXX' or "
-+			"'sens'itivity or 'retry'";
-+		adev->wstats.discard.retries++;
-+		/* Tx error 0x20 also seems to occur on
-+		 * overheating, so I'm not sure whether we
-+		 * actually want to do aggressive radio recalibration,
-+		 * since people maybe won't notice then that their hardware
-+		 * is slowly getting cooked...
-+		 * Or is it still a safe long distance from utter
-+		 * radio non-functionality despite many radio recalibs
-+		 * to final destructive overheating of the hardware?
-+		 * In this case we really should do recalib here...
-+		 * I guess the only way to find out is to do a
-+		 * potentially fatal self-experiment :-\
-+		 * Or maybe only recalib in case we're using Tx
-+		 * rate auto (on errors switching to lower speed
-+		 * --> less heat?) or 802.11 power save mode?
-+		 *
-+		 * ok, just do it. */
-+		if (++adev->retry_errors_msg_ratelimit % 4 == 0) {
-+			if (adev->retry_errors_msg_ratelimit <= 20) {
-+				printk("%s: several excessive Tx "
-+					"retry errors occurred, attempting "
-+					"to recalibrate radio. Radio "
-+					"drift might be caused by increasing "
-+					"card temperature, please check the card "
-+					"before it's too late!\n",
-+					adev->ndev->name);
-+				if (adev->retry_errors_msg_ratelimit == 20)
-+					printk("disabling above message\n");
-+			}
-+
-+			acx_schedule_task(adev,	ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+		}
-+		break;
-+	case 0x40:
-+		err = "Tx buffer overflow";
-+		adev->stats.tx_fifo_errors++;
-+		break;
-+	case 0x80:
-+		err = "DMA error";
-+		adev->wstats.discard.misc++;
-+		break;
-+	}
-+	adev->stats.tx_errors++;
-+	if (adev->stats.tx_errors <= 20)
-+		printk("%s: tx error 0x%02X, buf %02u! (%s)\n",
-+				adev->ndev->name, error, finger, err);
-+	else
-+		printk("%s: tx error 0x%02X, buf %02u!\n",
-+				adev->ndev->name, error, finger);
-+}
-+
-+
-+unsigned int
-+acxmem_l_clean_txdesc(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	unsigned finger;
-+	int num_cleaned;
-+	u16 r111;
-+	u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8;
-+	u32 acxmem;
-+	txdesc_t tmptxdesc;
-+
-+	FN_ENTER;
-+
-+	/*
-+	 * Set up a template descriptor for re-initialization.  The only
-+	 * things that get set are Ctl_8 and the rate, and the rate defaults
-+	 * to 1Mbps.
-+	 */
-+	memset (&tmptxdesc, 0, sizeof (tmptxdesc));
-+	tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG;
-+	tmptxdesc.u.r1.rate = 0x0a;
-+
-+	if (unlikely(acx_debug & L_DEBUG))
-+		log_txbuffer(adev);
-+
-+	log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail);
-+
-+	/* We know first descr which is not free yet. We advance it as far
-+	** as we see correct bits set in following descs (if next desc
-+	** is NOT free, we shouldn't advance at all). We know that in
-+	** front of tx_tail may be "holes" with isolated free descs.
-+	** We will catch up when all intermediate descs will be freed also */
-+
-+	finger = adev->tx_tail;
-+	num_cleaned = 0;
-+	while (likely(finger != adev->tx_head)) {
-+		txdesc = get_txdesc(adev, finger);
-+
-+		/* If we allocated txdesc on tx path but then decided
-+		** to NOT use it, then it will be left as a free "bubble"
-+		** in the "allocated for tx" part of the ring.
-+		** We may meet it on the next ring pass here. */
-+
-+		/* stop if not marked as "tx finished" and "host owned" */
-+		Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+		if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN)
-+					!= DESC_CTL_ACXDONE_HOSTOWN) {
-+			if (unlikely(!num_cleaned)) { /* maybe remove completely */
-+				log(L_BUFT, "clean_txdesc: tail isn't free. "
-+					"tail:%d head:%d\n",
-+					adev->tx_tail, adev->tx_head);
-+			}
-+			break;
-+		}
-+
-+		/* remember desc values... */
-+		error = read_slavemem8 (adev, (u32) &(txdesc->error));
-+		ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures));
-+		rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures));
-+		rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok));
-+		r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate));
-+		r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111)));
-+
-+		/* need to check for certain error conditions before we
-+		 * clean the descriptor: we still need valid descr data here */
-+		if (unlikely(0x30 & error)) {
-+			/* only send IWEVTXDROP in case of retry or lifetime exceeded;
-+			 * all other errors mean we screwed up locally */
-+			union iwreq_data wrqu;
-+			wlan_hdr_t *hdr;
-+			txhostdesc_t *hostdesc;
-+
-+			hostdesc = get_txhostdesc(adev, txdesc);
-+			hdr = (wlan_hdr_t *)hostdesc->data;
-+			MAC_COPY(wrqu.addr.sa_data, hdr->a1);
-+			wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL);
-+		}
-+
-+		/*
-+		 * Free up the transmit data buffers
-+		 */
-+		acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+		if (acxmem) {
-+		  reclaim_acx_txbuf_space (adev, acxmem);
-+		}
-+
-+		/* ...and free the desc by clearing all the fields 
-+		   except the next pointer */
-+		copy_to_slavemem (adev,
-+				  (u32) &(txdesc->HostMemPtr), 
-+				  (u8 *) &(tmptxdesc.HostMemPtr),
-+				  sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)
-+				  );
-+
-+		adev->tx_free++;
-+		num_cleaned++;
-+
-+		if ((adev->tx_free >= TX_START_QUEUE)
-+		 && (adev->status == ACX_STATUS_4_ASSOCIATED)
-+		 && (acx_queue_stopped(adev->ndev))
-+		) {
-+			log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n",
-+					adev->tx_free);
-+			acx_wake_queue(adev->ndev, NULL);
-+		}
-+
-+		/* do error checking, rate handling and logging
-+		 * AFTER having done the work, it's faster */
-+
-+		/* do rate handling */
-+		if (adev->rate_auto) {
-+			struct client *clt = get_txc(adev, txdesc);
-+			if (clt) {
-+				u16 cur = get_txr(adev, txdesc);
-+				if (clt->rate_cur == cur) {
-+					acx_l_handle_txrate_auto(adev, clt,
-+						cur, /* intended rate */
-+						r100, r111, /* actually used rate */
-+						(error & 0x30), /* was there an error? */
-+						TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free);
-+				}
-+			}
-+		}
-+
-+		if (unlikely(error))
-+			handle_tx_error(adev, error, finger);
-+
-+		if (IS_ACX111(adev))
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n",
-+				finger, ack_failures, rts_failures, rts_ok, r111);
-+		else
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n",
-+				finger, ack_failures, rts_failures, rts_ok, r100);
-+
-+		/* update pointer for descr to be cleaned next */
-+		finger = (finger + 1) % TX_CNT;
-+	}
-+
-+	/* remember last position */
-+	adev->tx_tail = finger;
-+/* end: */
-+	FN_EXIT1(num_cleaned);
-+	return num_cleaned;
-+}
-+
-+/* clean *all* Tx descriptors, and regardless of their previous state.
-+ * Used for brute-force reset handling. */
-+void
-+acxmem_l_clean_txdesc_emergency(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+	u32 acxmem;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < TX_CNT; i++) {
-+		txdesc = get_txdesc(adev, i);
-+
-+		/* free it */
-+		write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->error), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN);
-+
-+		/*
-+		 * Clean up the memory allocated on the ACX for this transmit descriptor.
-+		 */
-+		acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+		if (acxmem) {
-+		  reclaim_acx_txbuf_space (adev, acxmem);
-+		}		
-+		
-+		write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0);
-+	}
-+
-+	adev->tx_free = TX_CNT;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_create_tx_host_desc_queue
-+*/
-+
-+static void*
-+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg)
-+{
-+	void *ptr;
-+        ptr = kmalloc (size, GFP_KERNEL);
-+	/*
-+	 * The ACX can't use the physical address, so we'll have to fake it
-+	 * later and it might be handy to have the virtual address.
-+	 */
-+	*phy = (dma_addr_t) NULL;
-+
-+	if (ptr) {
-+		log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n",
-+				msg, (int)size, ptr, (unsigned long long)*phy);
-+		memset(ptr, 0, size);
-+		return ptr;
-+	}
-+	printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n",
-+					msg, (int)size);
-+	return NULL;
-+}
-+
-+
-+/*
-+ * In the generic slave memory access mode, most of the stuff in
-+ * the txhostdesc_t is unused.  It's only here because the rest of
-+ * the ACX driver expects it to be since the PCI version uses indirect
-+ * host memory organization with DMA.  Since we're not using DMA the
-+ * only use we have for the host descriptors is to store the packets
-+ * on the way out.
-+ */
-+static int
-+acxmem_s_create_tx_host_desc_queue(acx_device_t *adev)
-+{
-+	txhostdesc_t *hostdesc;
-+	u8 *txbuf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate TX buffer */
-+	adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS;
-+
-+	adev->txbuf_start = allocate(adev, adev->txbuf_area_size,
-+				     &adev->txbuf_startphy, "txbuf_start");
-+	if (!adev->txbuf_start)
-+	  goto fail;
-+
-+	/* allocate the TX host descriptor queue pool */
-+	adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc);
-+
-+	adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size,
-+					  &adev->txhostdesc_startphy, "txhostdesc_start");
-+	if (!adev->txhostdesc_start)
-+	  goto fail;
-+
-+	/* check for proper alignment of TX host descriptor pool */
-+	if ((long) adev->txhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	hostdesc = adev->txhostdesc_start;
-+	txbuf = adev->txbuf_start;
-+
-+#if 0
-+/* Each tx buffer is accessed by hardware via
-+** txdesc -> txhostdesc(s) -> txbuffer(s).
-+** We use only one txhostdesc per txdesc, but it looks like
-+** acx111 is buggy: it accesses second txhostdesc
-+** (via hostdesc.desc_phy_next field) even if
-+** txdesc->length == hostdesc->length and thus
-+** entire packet was placed into first txhostdesc.
-+** Due to this bug acx111 hangs unless second txhostdesc
-+** has le16_to_cpu(hostdesc.length) = 3 (or larger)
-+** Storing NULL into hostdesc.desc_phy_next
-+** doesn't seem to help.
-+**
-+** Update: although it worked on Xterasys XN-2522g
-+** with len=3 trick, WG311v2 is even more bogus, doesn't work.
-+** Keeping this code (#ifdef'ed out) for documentational purposes.
-+*/
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		hostdesc_phy += sizeof(*hostdesc);
-+		if (!(i & 1)) {
-+			hostdesc->data_phy = cpu2acx(txbuf_phy);
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN);
-+			/* hostdesc->length = ... */
-+			hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+			hostdesc->pNext = ptr2acx(NULL);
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			hostdesc->data = txbuf;
-+
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS;
-+			txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS;
-+		} else {
-+			/* hostdesc->data_phy = ... */
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			/* hostdesc->Ctl_16 = ... */
-+			hostdesc->length = cpu_to_le16(3); /* bug workaround */
-+			/* hostdesc->desc_phy_next = ... */
-+			/* hostdesc->pNext = ... */
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			/* hostdesc->data = ... */
-+		}
-+		hostdesc++;
-+	}
-+#endif
-+/* We initialize two hostdescs so that they point to adjacent
-+** memory areas. Thus txbuf is really just a contiguous memory area */
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		/* ->data is a non-hardware field: */
-+		hostdesc->data = txbuf;
-+
-+		if (!(i & 1)) {
-+			txbuf += WLAN_HDR_A3_LEN;
-+		} else {
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN;
-+		}
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_tx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_create_rx_host_desc_queue
-+*/
-+/* the whole size of a data buffer (header plus data body)
-+ * plus 32 bytes safety offset at the end */
-+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32)
-+
-+static int
-+acxmem_s_create_rx_host_desc_queue(acx_device_t *adev)
-+{
-+	rxhostdesc_t *hostdesc;
-+	rxbuffer_t *rxbuf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate the RX host descriptor queue pool */
-+	adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc);
-+
-+	adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size,
-+					  &adev->rxhostdesc_startphy, "rxhostdesc_start");
-+	if (!adev->rxhostdesc_start)
-+	  goto fail;
-+
-+	/* check for proper alignment of RX host descriptor pool */
-+	if ((long) adev->rxhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	/* allocate Rx buffer pool which will be used by the acx
-+	 * to store the whole content of the received frames in it */
-+	adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE;
-+
-+	adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size,
-+				     &adev->rxbuf_startphy, "rxbuf_start");
-+	if (!adev->rxbuf_start)
-+	  goto fail;
-+
-+	rxbuf = adev->rxbuf_start;
-+	hostdesc = adev->rxhostdesc_start;
-+
-+	/* don't make any popular C programming pointer arithmetic mistakes
-+	 * here, otherwise I'll kill you...
-+	 * (and don't dare asking me why I'm warning you about that...) */
-+	for (i = 0; i < RX_CNT; i++) {
-+		hostdesc->data = rxbuf;
-+		hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE);
-+		rxbuf++;
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_rx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_create_hostdesc_queues
-+*/
-+int
-+acxmem_s_create_hostdesc_queues(acx_device_t *adev)
-+{
-+	int result;
-+	result = acxmem_s_create_tx_host_desc_queue(adev);
-+	if (OK != result) return result;
-+	result = acxmem_s_create_rx_host_desc_queue(adev);
-+	return result;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_tx_desc_queue
-+*/
-+static void
-+acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start)
-+{
-+	txdesc_t *txdesc;
-+	u32 clr;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	if (IS_ACX100(adev))
-+		adev->txdesc_size = sizeof(*txdesc);
-+	else
-+		/* the acx111 txdesc is 4 bytes larger */
-+		adev->txdesc_size = sizeof(*txdesc) + 4;
-+
-+	/*
-+	 * This refers to an ACX address, not one of ours
-+	 */
-+	adev->txdesc_start = (txdesc_t *) tx_queue_start;
-+
-+	log(L_DEBUG, "adev->txdesc_start=%p\n",
-+			adev->txdesc_start);
-+
-+	adev->tx_free = TX_CNT;
-+	/* done by memset: adev->tx_head = 0; */
-+	/* done by memset: adev->tx_tail = 0; */
-+	txdesc = adev->txdesc_start;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111 has a preinitialized Tx buffer! */
-+		/* loop over whole send pool */
-+		/* FIXME: do we have to do the hostmemptr stuff here?? */
-+		for (i = 0; i < TX_CNT; i++) {
-+			txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+			/* reserve two (hdr desc and payload desc) */
-+			txdesc = advance_txdesc(adev, txdesc, 1);
-+		}
-+	} else {
-+		/* ACX100 Tx buffer needs to be initialized by us */
-+		/* clear whole send pool. sizeof is safe here (we are acx100) */
-+
-+		/*
-+		 * adev->txdesc_start refers to device memory, so we can't write
-+		 * directly to it.
-+		 */
-+		clr = (u32) adev->txdesc_start;
-+		while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) {
-+		  write_slavemem32 (adev, clr, 0);
-+		  clr += 4;
-+		}
-+
-+		/* loop over whole send pool */
-+		for (i = 0; i < TX_CNT; i++) {
-+			log(L_DEBUG, "configure card tx descriptor: 0x%p, "
-+				"size: 0x%X\n", txdesc, adev->txdesc_size);
-+
-+			/* initialise ctl */
-+			/*
-+			 * No auto DMA here
-+			 */
-+			write_slavemem8 (adev, (u32) &(txdesc->Ctl_8),
-+					(u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG));
-+			/* done by memset(0): txdesc->Ctl2_8 = 0; */
-+
-+			/* point to next txdesc */
-+			write_slavemem32 (adev, (u32) &(txdesc->pNextDesc),
-+					  (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size));
-+
-+			/* go to the next one */
-+			/* ++ is safe here (we are acx100) */
-+			txdesc++;
-+		}
-+		/* go back to the last one */
-+		txdesc--;
-+		/* and point to the first making it a ring buffer */
-+		write_slavemem32 (adev, (u32) &(txdesc->pNextDesc),
-+				  (u32) cpu_to_le32 (tx_queue_start));
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_rx_desc_queue
-+*/
-+static void
-+acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start)
-+{
-+	rxdesc_t *rxdesc;
-+	u32 mem_offs;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* done by memset: adev->rx_tail = 0; */
-+
-+	/* ACX111 doesn't need any further config: preconfigures itself.
-+	 * Simply print ring buffer for debugging */
-+	if (IS_ACX111(adev)) {
-+		/* rxdesc_start already set here */
-+
-+		adev->rxdesc_start = (rxdesc_t *) rx_queue_start;
-+
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc);
-+			rxdesc = adev->rxdesc_start = (rxdesc_t *)
-+			  acx2cpu(rxdesc->pNextDesc);
-+		}
-+	} else {
-+		/* we didn't pre-calculate rxdesc_start in case of ACX100 */
-+		/* rxdesc_start should be right AFTER Tx pool */
-+		adev->rxdesc_start = (rxdesc_t *)
-+			((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t)));
-+		/* NB: sizeof(txdesc_t) above is valid because we know
-+		** we are in if (acx100) block. Beware of cut-n-pasting elsewhere!
-+		** acx111's txdesc is larger! */
-+
-+		mem_offs = (u32) adev->rxdesc_start;
-+		while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) {
-+		  write_slavemem32 (adev, mem_offs, 0);
-+		  mem_offs += 4;
-+		}
-+
-+		/* loop over whole receive pool */
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc);
-+			/* point to next rxdesc */
-+			write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc),
-+					  (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc)));
-+			/* go to the next one */
-+			rxdesc++;
-+		}
-+		/* go to the last one */
-+		rxdesc--;
-+
-+		/* and point to the first making it a ring buffer */
-+		write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc),
-+				  (u32) cpu_to_le32 (rx_queue_start));
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_desc_queues
-+*/
-+void
-+acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start)
-+{
-+  u32 *p;
-+  int i;
-+
-+	acxmem_create_tx_desc_queue(adev, tx_queue_start);
-+	acxmem_create_rx_desc_queue(adev, rx_queue_start);
-+	p = (u32 *) adev->acx_queue_indicator;
-+	for (i = 0; i < 4; i++) {
-+	  write_slavemem32 (adev, (u32) p, 0);
-+	  p++;
-+	}
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_proc_diag_output
-+*/
-+char*
-+acxmem_s_proc_diag_output(char *p, acx_device_t *adev)
-+{
-+	const char *rtl, *thd, *ttl;
-+	txdesc_t *txdesc;
-+	u8 Ctl_8;
-+	rxdesc_t *rxdesc;
-+	int i;
-+	u32 tmp;
-+	txdesc_t txd;
-+	u8 buf[0x200];
-+	int j, k;
-+
-+	FN_ENTER;
-+
-+#if DUMP_MEM_DURING_DIAG > 0
-+	dump_acxmem (adev, 0, 0x10000);
-+	panic ("dump finished");
-+#endif
-+	
-+	p += sprintf(p, "** Rx buf **\n");
-+	rxdesc = adev->rxdesc_start;
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		rtl = (i == adev->rx_tail) ? " [tail]" : "";
-+		Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+		if (Ctl_8 & DESC_CTL_HOSTOWN)
-+			p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl);
-+		else
-+			p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl);
-+		rxdesc++;
-+	}
-+	p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free,
-+				acx_queue_stopped(adev->ndev) ? "STOPPED" : "running");
-+	
-+	p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n",
-+		     adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free);
-+	txdesc = adev->txdesc_start;
-+	if (txdesc) {
-+	  for (i = 0; i < TX_CNT; i++) {
-+	    thd = (i == adev->tx_head) ? " [head]" : "";
-+	    ttl = (i == adev->tx_tail) ? " [tail]" : "";
-+	    copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd));
-+	    Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+	    if (Ctl_8 & DESC_CTL_ACXDONE)
-+	      p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    else if (Ctl_8 & DESC_CTL_HOSTOWN)
-+	      p += sprintf(p, "%02u available     (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    else
-+	      p += sprintf(p, "%02u busy          (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+	    if (tmp) {
-+	      p += sprintf (p, " %04x", tmp);
-+	      while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) {
-+		tmp <<= 5;
-+		p += sprintf (p, " %04x", tmp);
-+	      }
-+	    }
-+	    p += sprintf (p, "\n");
-+	    p += sprintf (p, "  %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n"
-+			     "%02x %02x %02x %02x %04x\n",
-+			  (u32) txdesc,
-+			  txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time,
-+			  txd.total_length, txd.Reserved,
-+			  txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3],
-+			  txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures,
-+			  txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl,
-+			  txd.queue_info
-+			  );
-+	    if (txd.AcxMemPtr.v) {
-+	      copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf));
-+	      for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) {
-+		p += sprintf (p, "    ");
-+		for (k = 0; (k < 16) && (j+k < txd.total_length); k++) {
-+		  p += sprintf (p, " %02x", buf[j+k+4]);
-+		}
-+		p += sprintf (p, "\n");
-+	      }
-+	    }
-+	    txdesc = advance_txdesc(adev, txdesc, 1);
-+	  }
-+	}
-+	
-+	p += sprintf(p,
-+		"\n"
-+		"** Generic slave data **\n"
-+                "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n"
-+		"txbuf_start 0x%p, txbuf_area_size %u\n"
-+		"txdesc_size %u, txdesc_start 0x%p\n"
-+		"txhostdesc_start 0x%p, txhostdesc_area_size %u\n"
-+		"txbuf start 0x%04x, txbuf size %d\n"
-+		"rxdesc_start 0x%p\n"
-+		"rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n"
-+		"rxbuf_start 0x%p, rxbuf_area_size %u\n",
-+		adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES),
-+		adev->txbuf_start, adev->txbuf_area_size,
-+		adev->txdesc_size, adev->txdesc_start,
-+		adev->txhostdesc_start, adev->txhostdesc_area_size,
-+                adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize,
-+		adev->rxdesc_start,
-+		adev->rxhostdesc_start, adev->rxhostdesc_area_size,
-+		adev->rxbuf_start, adev->rxbuf_area_size);
-+	FN_EXIT0;
-+	return p;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxmem_proc_eeprom_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < 0x400; i++) {
-+		acxmem_read_eeprom_byte(adev, i, p++);
-+	}
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acxmem_set_interrupt_mask(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev)) {
-+		adev->irq_mask = (u16) ~(0
-+				| HOST_INT_RX_DATA       
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				/* | HOST_INT_RX_COMPLETE    */
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				| HOST_INT_IV_ICV_FAILURE
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				| HOST_INT_OVERFLOW    
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				| HOST_INT_FCS_THRESHOLD
-+				| HOST_INT_UNKNOWN
-+				);
-+		/* Or else acx100 won't signal cmd completion, right? */
-+		adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */
-+	} else {
-+		adev->irq_mask = (u16) ~(0
-+				| HOST_INT_RX_DATA 
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				/* | HOST_INT_RX_COMPLETE    */
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				/* | HOST_INT_IV_ICV_FAILURE */
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				/* | HOST_INT_OVERFLOW       */
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				/* | HOST_INT_FCS_THRESHOLD  */
-+				/* | HOST_INT_BEACON_MISSED        */
-+				);
-+		adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	struct acx111_ie_tx_level tx_level;
-+
-+	/* since it can be assumed that at least the Maxim radio has a
-+	 * maximum power output of 20dBm and since it also can be
-+	 * assumed that these values drive the DAC responsible for
-+	 * setting the linear Tx level, I'd guess that these values
-+	 * should be the corresponding linear values for a dBm value,
-+	 * in other words: calculate the values from that formula:
-+	 * Y [dBm] = 10 * log (X [mW])
-+	 * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm)
-+	 * and you're done...
-+	 * Hopefully that's ok, but you never know if we're actually
-+	 * right... (especially since Windows XP doesn't seem to show
-+	 * actual Tx dBm values :-P) */
-+
-+	/* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the
-+	 * values are EXACTLY mW!!! Not sure about RFMD and others,
-+	 * though... */
-+	static const u8 dbm2val_maxim[21] = {
-+		63, 63, 63, 62,
-+		61, 61, 60, 60,
-+		59, 58, 57, 55,
-+		53, 50, 47, 43,
-+		38, 31, 23, 13,
-+		0
-+	};
-+	static const u8 dbm2val_rfmd[21] = {
-+		 0,  0,  0,  1,
-+		 2,  2,  3,  3,
-+		 4,  5,  6,  8,
-+		10, 13, 16, 20,
-+		25, 32, 41, 50,
-+		63
-+	};
-+	const u8 *table;
-+
-+	switch (adev->radio_type) {
-+	case RADIO_MAXIM_0D:
-+		table = &dbm2val_maxim[0];
-+		break;
-+	case RADIO_RFMD_11:
-+	case RADIO_RALINK_15:
-+		table = &dbm2val_rfmd[0];
-+		break;
-+	default:
-+		printk("%s: unknown/unsupported radio type, "
-+			"cannot modify tx power level yet!\n",
-+				adev->ndev->name);
-+		return NOT_OK;
-+	}
-+	/*
-+	 * The hx4700 EEPROM, at least, only supports 1 power setting.  The configure
-+	 * routine matches the PA bias with the gain, so just use its default value.
-+	 * The values are: 0x2b for the gain and 0x03 for the PA bias.  The firmware
-+	 * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim
-+	 * radio's PA bias register.  The firmware limits itself to 0 - 64 when writing to the
-+	 * gain control DAC.
-+	 *
-+	 * Physically between the ACX and the radio, higher Tx gain control DAC values result
-+	 * in less power output; 0 volts to the Maxim radio results in the highest output power
-+	 * level, which I'm assuming matches up with 0 in the Tx Gain DAC register.
-+	 *
-+	 * Although there is only the 1 power setting, one of the radio firmware functions adjusts
-+	 * the transmit power level up and down.  That function is called by the ACX FIQ handler
-+	 * under certain conditions.
-+	 */
-+	tx_level.level = 1;
-+	//return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL);
-+
-+	printk("%s: changing radio power level to %u dBm (%u)\n",
-+			adev->ndev->name, level_dbm, table[level_dbm]);
-+	acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]);
-+
-+	return 0;
-+}
-+
-+void acxmem_e_release(struct device *dev) {
-+}
-+
-+/***********************************************************************
-+** acx_cs part
-+**
-+** called by pcmcia card service
-+*/
-+
-+/*
-+   The event() function is this driver's Card Services event handler.
-+   It will be called by Card Services when an appropriate card status
-+   event is received.  The config() and release() entry points are
-+   used to configure or release a socket, in response to card
-+   insertion and ejection events.  They are invoked from the acx_cs
-+   event handler. 
-+*/
-+
-+static int acx_cs_config(struct pcmcia_device *link);
-+static void acx_cs_release(struct pcmcia_device *link);
-+
-+/*
-+   The attach() and detach() entry points are used to create and destroy
-+   "instances" of the driver, where each instance represents everything
-+   needed to manage one actual PCMCIA card.
-+*/
-+
-+static void acx_cs_detach(struct pcmcia_device *p_dev);
-+
-+/*
-+   You'll also need to prototype all the functions that will actually
-+   be used to talk to your device.  See 'pcmem_cs' for a good example
-+   of a fully self-sufficient driver; the other drivers rely more or
-+   less on other parts of the kernel.
-+*/
-+
-+/*
-+   A linked list of "instances" of the  acxnet device.  Each actual
-+   PCMCIA card corresponds to one device instance, and is described
-+   by one struct pcmcia_device structure (defined in ds.h).
-+
-+   You may not want to use a linked list for this -- for example, the
-+   memory card driver uses an array of struct pcmcia_device pointers, where minor
-+   device numbers are used to derive the corresponding array index.
-+*/
-+
-+/*
-+   A driver needs to provide a dev_node_t structure for each device
-+   on a card.  In some cases, there is only one device per card (for
-+   example, ethernet cards, modems).  In other cases, there may be
-+   many actual or logical devices (SCSI adapters, memory cards with
-+   multiple partitions).  The dev_node_t structures need to be kept
-+   in a linked list starting at the 'dev' field of a struct pcmcia_device
-+   structure.  We allocate them in the card's private data structure,
-+   because they generally shouldn't be allocated dynamically.
-+
-+   In this case, we also provide a flag to indicate if a device is
-+   "stopped" due to a power management event, or card ejection.  The
-+   device IO routines can use a flag like this to throttle IO to a
-+   card that is not ready to accept it.
-+*/
-+   
-+
-+/*======================================================================
-+  
-+  acx_attach() creates an "instance" of the driver, allocating
-+  local data structures for one device.  The device is registered
-+  with Card Services.
-+  
-+  The dev_link structure is initialized, but we don't actually
-+  configure the card at this point -- we wait until we receive a
-+  card insertion event.
-+  
-+  ======================================================================*/
-+
-+static int acx_cs_probe(struct pcmcia_device *link)
-+{
-+	local_info_t *local;
-+	struct net_device *ndev;
-+
-+	DEBUG(0, "acx_attach()\n");
-+
-+        ndev = alloc_netdev(sizeof(acx_device_t), "wlan%d", dummy_netdev_init);
-+        if (!ndev) {
-+                printk("acx: no memory for netdevice struct\n");
-+                return -ENOMEM;
-+        }
-+
-+        /* Interrupt setup */
-+        link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-+        link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-+        link->irq.Handler = acxmem_i_interrupt;
-+        link->irq.Instance = ndev;
-+
-+	/*
-+	  General socket configuration defaults can go here.  In this
-+	  client, we assume very little, and rely on the CIS for almost
-+	  everything.  In most clients, many details (i.e., number, sizes,
-+	  and attributes of IO windows) are fixed by the nature of the
-+	  device, and can be hard-wired here.
-+	*/
-+	link->conf.Attributes = CONF_ENABLE_IRQ;
-+	link->conf.IntType = INT_MEMORY_AND_IO;
-+	link->conf.Present = PRESENT_OPTION | PRESENT_COPY;
-+	
-+	/* Allocate space for private device-specific data */
-+	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
-+	if (!local) {
-+		printk(KERN_ERR "acx_cs: no memory for new device\n");
-+		return -ENOMEM;
-+	}
-+	local->ndev = ndev;
-+	
-+	link->priv = local;
-+
-+	return acx_cs_config(link);
-+} /* acx_attach */
-+
-+/*======================================================================
-+  
-+  This deletes a driver "instance".  The device is de-registered
-+  with Card Services.  If it has been released, all local data
-+  structures are freed.  Otherwise, the structures will be freed
-+  when the device is released.
-+  
-+  ======================================================================*/
-+
-+static void acx_cs_detach(struct pcmcia_device *link)
-+{
-+	DEBUG(0, "acx_detach(0x%p)\n", link);
-+
-+
-+	if ( ((local_info_t*)link->priv)->ndev ) {
-+		acxmem_e_close( ((local_info_t*)link->priv)->ndev );
-+	}
-+
-+	acx_cs_release(link);
-+
-+	((local_info_t*)link->priv)->ndev = NULL;
-+
-+	kfree(link->priv);
-+} /* acx_detach */
-+
-+/*======================================================================
-+  
-+  acx_config() is scheduled to run after a CARD_INSERTION event
-+  is received, to configure the PCMCIA socket, and to make the
-+  device available to the system.
-+  
-+  ======================================================================*/
-+
-+#define CS_CHECK(fn, ret) \
-+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-+
-+static int acx_cs_config(struct pcmcia_device *link)
-+{
-+	tuple_t tuple;
-+	cisparse_t parse;
-+	local_info_t *local = link->priv;
-+	int last_fn, last_ret;
-+	u_char buf[64];
-+	win_req_t req;
-+	memreq_t map;
-+//	int i;
-+//        acx_device_t *adev;
-+
-+//	adev = (acx_device_t *)link->priv;
-+
-+	DEBUG(0, "acx_cs_config(0x%p)\n", link);
-+
-+	/*
-+	  In this loop, we scan the CIS for configuration table entries,
-+	  each of which describes a valid card configuration, including
-+	  voltage, IO window, memory window, and interrupt settings.
-+	  
-+	  We make no assumptions about the card to be configured: we use
-+	  just the information available in the CIS.  In an ideal world,
-+	  this would work for any PCMCIA card, but it requires a complete
-+	  and accurate CIS.  In practice, a driver usually "knows" most of
-+	  these things without consulting the CIS, and most client drivers
-+	  will only use the CIS to fill in implementation-defined details.
-+	*/
-+    tuple.Attributes = 0;
-+    tuple.TupleData = (cisdata_t *)buf;
-+    tuple.TupleDataMax = sizeof(buf);
-+    tuple.TupleOffset = 0;
-+    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-+
-+    /* don't trust the CIS on this; Linksys got it wrong */
-+    //link->conf.Present = 0x63;
-+
-+    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-+        while (1) {
-+                cistpl_cftable_entry_t dflt = { 0 };
-+                cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-+                if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-+                                pcmcia_parse_tuple(link, &tuple, &parse) != 0)
-+                        goto next_entry;
-+
-+                if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
-+                if (cfg->index == 0) goto next_entry;
-+                link->conf.ConfigIndex = cfg->index;
-+
-+                /* Does this card need audio output? */
-+                if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-+                        link->conf.Attributes |= CONF_ENABLE_SPKR;
-+                        link->conf.Status = CCSR_AUDIO_ENA;
-+                }
-+
-+                /* Use power settings for Vcc and Vpp if present */
-+                /*  Note that the CIS values need to be rescaled */
-+                if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-+                        link->conf.Vpp =
-+                                cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-+                else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-+                        link->conf.Vpp =
-+                                dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-+
-+                /* Do we need to allocate an interrupt? */
-+                if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-+                        link->conf.Attributes |= CONF_ENABLE_IRQ;
-+                if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
-+                        cistpl_mem_t *mem =
-+                                (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
-+//                        req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_AM|WIN_ENABLE|WIN_USE_WAIT;
-+                      req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE|WIN_USE_WAIT;
-+                        req.Base = mem->win[0].host_addr;
-+                        req.Size = mem->win[0].len;
-+                        req.Size=0x1000;
-+                        req.AccessSpeed = 0;
-+                        if (pcmcia_request_window(&link, &req, &link->win) != 0)
-+                                goto next_entry;
-+                        map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-+                        if (pcmcia_map_mem_page(link->win, &map) != 0)
-+                                goto next_entry;
-+                        else
-+                           printk(KERN_INFO "MEMORY WINDOW FOUND!!!\n");
-+                }
-+                /* If we got this far, we're cool! */
-+                break;
-+
-+        next_entry:
-+                CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-+        }
-+
-+       if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-+                printk(KERN_INFO "requesting Irq...\n");
-+                CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-+       }
-+
-+        /*
-+          This actually configures the PCMCIA socket -- setting up
-+          the I/O windows and the interrupt mapping, and putting the
-+          card and host interface into "Memory and IO" mode.
-+        */
-+        CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
-+	DEBUG(0,"RequestConfiguration OK\n");
-+
-+
-+          memwin.Base=req.Base;
-+          memwin.Size=req.Size;
-+
-+	acx_init_netdev(local->ndev, &link->dev, memwin.Base, memwin.Size, link->irq.AssignedIRQ);
-+
-+#if 1	
-+	/*
-+	  At this point, the dev_node_t structure(s) need to be
-+	  initialized and arranged in a linked list at link->dev_node.
-+	*/
-+	strcpy(local->node.dev_name, local->ndev->name );
-+	local->node.major = local->node.minor = 0;
-+	link->dev_node = &local->node;
-+	
-+	/* Finally, report what we've done */
-+	printk(KERN_INFO "%s: index 0x%02x: ",
-+	       local->ndev->name, link->conf.ConfigIndex);
-+#endif
-+	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-+		printk("irq %d", link->irq.AssignedIRQ);
-+	if (link->io.NumPorts1)
-+		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-+		       link->io.BasePort1+link->io.NumPorts1-1);
-+	if (link->io.NumPorts2)
-+		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-+		       link->io.BasePort2+link->io.NumPorts2-1);
-+	if (link->win)
-+		printk(", mem 0x%06lx-0x%06lx\n", req.Base,
-+		       req.Base+req.Size-1);
-+	return 0;
-+
-+ cs_failed:
-+	cs_error(link, last_fn, last_ret);
-+	acx_cs_release(link);
-+	return -ENODEV;
-+} /* acx_config */
-+
-+/*======================================================================
-+  
-+  After a card is removed, acx_release() will unregister the
-+  device, and release the PCMCIA configuration.  If the device is
-+  still open, this will be postponed until it is closed.
-+  
-+  ======================================================================*/
-+
-+static void acx_cs_release(struct pcmcia_device *link)
-+{
-+	DEBUG(0, "acx_release(0x%p)\n", link);
-+	acxmem_e_remove(link);
-+	pcmcia_disable_device(link);
-+}
-+
-+static int acx_cs_suspend(struct pcmcia_device *link)
-+{
-+	local_info_t *local = link->priv;
-+
-+	pm_message_t state;
-+	acxmem_e_suspend ( local->ndev, state);
-+	/* Already done in suspend
-+	 * netif_device_detach(local->ndev); */
-+
-+	return 0;
-+}
-+
-+static int acx_cs_resume(struct pcmcia_device *link)
-+{
-+	local_info_t *local = link->priv;
-+	
-+	FN_ENTER;
-+	resume_ndev = local->ndev;
-+
-+	schedule_work( &fw_resume_work );
-+	
-+	/* Already done in suspend
-+	if (link->open) {
-+	  // do we need reset for ACX, if so what function nane is ?
-+		//reset_acx_card(local->eth_dev);
-+		netif_device_attach(local->ndev);
-+	} */
-+	
-+	FN_EXIT0;
-+	return 0;
-+}
-+
-+static struct pcmcia_device_id acx_ids[] = {
-+	PCMCIA_DEVICE_MANF_CARD(0x0097, 0x8402),
-+        PCMCIA_DEVICE_MANF_CARD(0x0250, 0xb001),
-+	PCMCIA_DEVICE_NULL,
-+};
-+MODULE_DEVICE_TABLE(pcmcia, acx_ids);
-+
-+static struct pcmcia_driver acx_driver = {
-+	.owner		= THIS_MODULE,
-+	.drv		= {
-+		.name	= "acx_cs",
-+	},
-+	.probe		= acx_cs_probe,
-+	.remove		= acx_cs_detach,
-+	.id_table = acx_ids,
-+	.suspend	= acx_cs_suspend,
-+	.resume		= acx_cs_resume,
-+};
-+
-+int acx_cs_init(void)
-+{
-+        /* return success if at least one succeeded */
-+	DEBUG(0, "acxcs_init()\n");
-+	return pcmcia_register_driver(&acx_driver);
-+}
-+
-+void acx_cs_cleanup(void)
-+{
-+	pcmcia_unregister_driver(&acx_driver);
-+}
-+
-+/*
-+    This program is free software; you can redistribute it and/or
-+    modify it under the terms of the GNU General Public License
-+    as published by the Free Software Foundation; either version 2
-+    of the License, or (at your option) any later version.
-+
-+    This program is distributed in the hope that it will be useful,
-+    but WITHOUT ANY WARRANTY; without even the implied warranty of
-+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+    GNU General Public License for more details.
-+
-+    In addition:
-+
-+    Redistribution and use in source and binary forms, with or without
-+    modification, are permitted provided that the following conditions
-+    are met:
-+
-+    1. Redistributions of source code must retain the above copyright
-+       notice, this list of conditions and the following disclaimer.
-+    2. Redistributions in binary form must reproduce the above copyright
-+       notice, this list of conditions and the following disclaimer in the
-+       documentation and/or other materials provided with the distribution.
-+    3. The name of the author may not be used to endorse or promote
-+       products derived from this software without specific prior written
-+       permission.
-+
-+    THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-+    IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+    ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-+    INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+    SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-+    STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-+    IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+    POSSIBILITY OF SUCH DAMAGE.    
-+*/
-+
-+MODULE_DESCRIPTION( "ACX Cardbus Driver" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/htcsable_acx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/htcsable_acx.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,118 @@
-+/*
-+ * WLAN (TI TNETW1100B) support in the HTC Sable
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * 28-March-2006          Todd Blumer <todd@sdgsystems.com>
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <linux/mfd/asic3_base.h>
-+#include <asm/arch/htcsable-gpio.h>
-+#include <asm/arch/htcsable-asic.h>
-+#include <asm/io.h>
-+
-+#include "acx_hw.h"
-+
-+#define WLAN_BASE	PXA_CS2_PHYS
-+
-+/*
-+off: b15 c8 d3
-+on: d3 c8 b5 b5-
-+*/
-+
-+#define GPIO_NR_HTCSABLE_ACX111 111
-+
-+static int
-+htcsable_wlan_stop( void );
-+
-+static int
-+htcsable_wlan_start( void )
-+{
-+	printk( "htcsable_wlan_start\n" );
-+
-+  /*asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_RESET, 0);*/
-+  asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_PWR_3, 1<<GPIOC_ACX_PWR_3); /* related to acx */
-+  SET_HTCSABLE_GPIO(ACX111, 1);
-+	asic3_set_gpio_out_b(&htcsable_asic3.dev, 1<<GPIOB_ACX_PWR_1, 1<<GPIOB_ACX_PWR_1);
-+	asic3_set_gpio_out_d(&htcsable_asic3.dev, 1<<GPIOD_ACX_PWR_2, 1<<GPIOD_ACX_PWR_2);
-+  mdelay(260);
-+  asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_RESET, 1<<GPIOC_ACX_RESET);
-+
-+	return 0;
-+}
-+
-+static int
-+htcsable_wlan_stop( void )
-+{
-+	printk( "htcsable_wlan_stop\n" );
-+	asic3_set_gpio_out_b(&htcsable_asic3.dev, 1<<GPIOB_ACX_PWR_1, 0);
-+	asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_RESET, 0);
-+	asic3_set_gpio_out_d(&htcsable_asic3.dev, 1<<GPIOD_ACX_PWR_2, 0);
-+  SET_HTCSABLE_GPIO(ACX111, 0); /* not necessary to power down this one? */
-+	asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_PWR_3, 0); /* not necessary to power down this one? */
-+
-+	return 0;
-+}
-+
-+static struct resource acx_resources[] = {
-+	[0] = {
-+		.start	= WLAN_BASE,
-+		.end	= WLAN_BASE + 0x20,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+//		.start	= asic3_irq_base(&htcsable_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N,
-+//		.end	= asic3_irq_base(&htcsable_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct acx_hardware_data acx_data = {
-+	.start_hw	= htcsable_wlan_start,
-+	.stop_hw	= htcsable_wlan_stop,
-+};
-+
-+static struct platform_device acx_device = {
-+	.name	= "acx-mem",
-+	.dev	= {
-+		.platform_data = &acx_data,
-+	},
-+	.num_resources	= ARRAY_SIZE( acx_resources ),
-+	.resource	= acx_resources,
-+};
-+
-+static int __init
-+htcsable_wlan_init( void )
-+{
-+	printk( "htcsable_wlan_init: acx-mem platform_device_register\n" );
-+	acx_device.resource[1].start = asic3_irq_base(&htcsable_asic3.dev) + ASIC3_GPIOB_IRQ_BASE+GPIOB_ACX_IRQ_N;
-+	acx_device.resource[1].end = asic3_irq_base(&htcsable_asic3.dev) + ASIC3_GPIOB_IRQ_BASE+GPIOB_ACX_IRQ_N;
-+	return platform_device_register( &acx_device );
-+}
-+
-+
-+static void __exit
-+htcsable_wlan_exit( void )
-+{
-+	platform_device_unregister( &acx_device );
-+}
-+
-+module_init( htcsable_wlan_init );
-+module_exit( htcsable_wlan_exit );
-+
-+MODULE_AUTHOR( "Todd Blumer <todd@sdgsystems.com>" );
-+MODULE_DESCRIPTION( "WLAN driver for HTC Sable" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/htcuniversal_acx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/htcuniversal_acx.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,108 @@
-+/*
-+ * WLAN (TI TNETW1100B) support in the HTC Universal
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * 28-March-2006          Todd Blumer <todd@sdgsystems.com>
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+#include <asm/io.h>
-+
-+#include "acx_hw.h"
-+
-+#define WLAN_BASE	PXA_CS2_PHYS
-+
-+
-+static int
-+htcuniversal_wlan_start( void )
-+{
-+	htcuniversal_egpio_enable(1<<EGPIO6_WIFI_ON);
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_PWR1_ON, 1<<GPIOC_WIFI_PWR1_ON);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_WIFI_PWR3_ON, 1<<GPIOD_WIFI_PWR3_ON);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_WIFI_PWR2_ON, 1<<GPIOD_WIFI_PWR2_ON);
-+	mdelay(100);
-+
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_RESET, 0);
-+	mdelay(100);
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_RESET, 1<<GPIOC_WIFI_RESET);
-+	mdelay(100);
-+	return 0;
-+}
-+
-+static int
-+htcuniversal_wlan_stop( void )
-+{
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_RESET, 0);
-+
-+	htcuniversal_egpio_disable(1<<EGPIO6_WIFI_ON);
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_PWR1_ON, 0);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_WIFI_PWR2_ON, 0);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_WIFI_PWR3_ON, 0);
-+	return 0;
-+}
-+
-+static struct resource acx_resources[] = {
-+	[0] = {
-+		.start	= WLAN_BASE,
-+		.end	= WLAN_BASE + 0x20,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+//		.start	= asic3_irq_base(&htcuniversal_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N,
-+//		.end	= asic3_irq_base(&htcuniversal_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct acx_hardware_data acx_data = {
-+	.start_hw	= htcuniversal_wlan_start,
-+	.stop_hw	= htcuniversal_wlan_stop,
-+};
-+
-+static struct platform_device acx_device = {
-+	.name	= "acx-mem",
-+	.dev	= {
-+		.platform_data = &acx_data,
-+	},
-+	.num_resources	= ARRAY_SIZE( acx_resources ),
-+	.resource	= acx_resources,
-+};
-+
-+static int __init
-+htcuniversal_wlan_init( void )
-+{
-+	printk( "htcuniversal_wlan_init: acx-mem platform_device_register\n" );
-+	acx_device.resource[1].start = asic3_irq_base(&htcuniversal_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N;
-+	acx_device.resource[1].end = asic3_irq_base(&htcuniversal_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N;
-+	return platform_device_register( &acx_device );
-+}
-+
-+
-+static void __exit
-+htcuniversal_wlan_exit( void )
-+{
-+	platform_device_unregister( &acx_device );
-+}
-+
-+module_init( htcuniversal_wlan_init );
-+module_exit( htcuniversal_wlan_exit );
-+
-+MODULE_AUTHOR( "Todd Blumer <todd@sdgsystems.com>" );
-+MODULE_DESCRIPTION( "WLAN driver for HTC Universal" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/hx4700_acx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/hx4700_acx.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,108 @@
-+/*
-+ * WLAN (TI TNETW1100B) support in the hx470x.
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * 28-March-2006          Todd Blumer <todd@sdgsystems.com>
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/leds.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/hx4700-gpio.h>
-+#include <asm/arch/hx4700-core.h>
-+#include <asm/io.h>
-+
-+#include "acx_hw.h"
-+
-+#define WLAN_OFFSET	0x1000000
-+#define WLAN_BASE	(PXA_CS5_PHYS+WLAN_OFFSET)
-+
-+
-+static int
-+hx4700_wlan_start( void )
-+{
-+	SET_HX4700_GPIO( WLAN_RESET_N, 0 );
-+	mdelay(5);
-+	hx4700_egpio_enable( EGPIO0_VCC_3V3_EN );
-+	mdelay(100);
-+	hx4700_egpio_enable( EGPIO7_VCC_3V3_WL_EN );
-+	mdelay(150);
-+	hx4700_egpio_enable( EGPIO1_WL_VREG_EN | EGPIO2_VCC_2V1_WL_EN |
-+                             EGPIO6_WL1V8_EN );
-+	mdelay(10);
-+	SET_HX4700_GPIO( WLAN_RESET_N, 1 );
-+	mdelay(50);
-+	led_trigger_event_shared(hx4700_radio_trig, LED_FULL);
-+	return 0;
-+}
-+
-+static int
-+hx4700_wlan_stop( void )
-+{
-+	hx4700_egpio_disable( EGPIO0_VCC_3V3_EN | EGPIO1_WL_VREG_EN |
-+                              EGPIO7_VCC_3V3_WL_EN | EGPIO2_VCC_2V1_WL_EN |
-+                              EGPIO6_WL1V8_EN );
-+	SET_HX4700_GPIO( WLAN_RESET_N, 0 );
-+	led_trigger_event_shared(hx4700_radio_trig, LED_OFF);
-+	return 0;
-+}
-+
-+static struct resource acx_resources[] = {
-+	[0] = {
-+		.start	= WLAN_BASE,
-+		.end	= WLAN_BASE + 0x20,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= HX4700_IRQ(WLAN_IRQ_N),
-+		.end	= HX4700_IRQ(WLAN_IRQ_N),
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct acx_hardware_data acx_data = {
-+	.start_hw	= hx4700_wlan_start,
-+	.stop_hw	= hx4700_wlan_stop,
-+};
-+
-+static struct platform_device acx_device = {
-+	.name	= "acx-mem",
-+	.dev	= {
-+		.platform_data = &acx_data,
-+	},
-+	.num_resources	= ARRAY_SIZE( acx_resources ),
-+	.resource	= acx_resources,
-+};
-+
-+static int __init
-+hx4700_wlan_init( void )
-+{
-+	printk( "hx4700_wlan_init: acx-mem platform_device_register\n" );
-+	return platform_device_register( &acx_device );
-+}
-+
-+
-+static void __exit
-+hx4700_wlan_exit( void )
-+{
-+	platform_device_unregister( &acx_device );
-+}
-+
-+module_init( hx4700_wlan_init );
-+module_exit( hx4700_wlan_exit );
-+
-+MODULE_AUTHOR( "Todd Blumer <todd@sdgsystems.com>" );
-+MODULE_DESCRIPTION( "WLAN driver for iPAQ hx4700" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/ioctl.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/ioctl.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,2748 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <asm/io.h>
-+/* #include <asm/uaccess.h> */ /* required for 2.4.x kernels; verify_write() */
-+#include <linux/if_arp.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+
-+/* channel frequencies
-+ * TODO: Currently, every other 802.11 driver keeps its own copy of this. In
-+ * the long run this should be integrated into ieee802_11.h or wireless.h or
-+ * whatever IEEE802.11x framework evolves */
-+static const u16 acx_channel_freq[] = {
-+	2412, 2417, 2422, 2427, 2432, 2437, 2442,
-+	2447, 2452, 2457, 2462, 2467, 2472, 2484,
-+};
-+
-+
-+/***********************************************************************
-+** acx_ioctl_commit
-+*/
-+static int
-+acx_ioctl_commit(struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+	if (ACX_STATE_IFACE_UP & adev->dev_state_mask)
-+		acx_s_update_card_settings(adev);
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_name(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	static const char * const names[] = { "IEEE 802.11b+/g+", "IEEE 802.11b+" };
-+
-+	strcpy(wrqu->name, names[IS_ACX111(adev) ? 0 : 1]);
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_freq
-+*/
-+static int
-+acx_ioctl_set_freq(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int channel = -1;
-+	unsigned int mult = 1;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (wrqu->freq.e == 0 && wrqu->freq.m <= 1000) {
-+		/* Setting by channel number */
-+		channel = wrqu->freq.m;
-+	} else {
-+		/* If setting by frequency, convert to a channel */
-+		int i;
-+
-+		for (i = 0; i < (6 - wrqu->freq.e); i++)
-+			mult *= 10;
-+
-+		for (i = 1; i <= 14; i++)
-+			if (wrqu->freq.m == acx_channel_freq[i - 1] * mult)
-+				channel = i;
-+	}
-+
-+	if (channel > 14) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	adev->channel = channel;
-+	/* hmm, the following code part is strange, but this is how
-+	 * it was being done before... */
-+	log(L_IOCTL, "Changing to channel %d\n", channel);
-+	SET_BIT(adev->set_mask, GETSET_CHANNEL);
-+
-+	result = -EINPROGRESS; /* need to call commit handler */
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static inline int
-+acx_ioctl_get_freq(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	wrqu->freq.e = 0;
-+	wrqu->freq.m = adev->channel;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_mode
-+*/
-+static int
-+acx_ioctl_set_mode(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	switch (wrqu->mode) {
-+	case IW_MODE_AUTO:
-+		adev->mode = ACX_MODE_OFF;
-+		break;
-+	case IW_MODE_MONITOR:
-+		adev->mode = ACX_MODE_MONITOR;
-+		break;
-+	case IW_MODE_ADHOC:
-+		adev->mode = ACX_MODE_0_ADHOC;
-+		break;
-+	case IW_MODE_INFRA:
-+		adev->mode = ACX_MODE_2_STA;
-+		break;
-+	case IW_MODE_MASTER:
-+		printk("acx: master mode (HostAP) is very, very "
-+			"experimental! It might work partially, but "
-+			"better get prepared for nasty surprises "
-+			"at any time\n");
-+		adev->mode = ACX_MODE_3_AP;
-+		break;
-+	case IW_MODE_REPEAT:
-+	case IW_MODE_SECOND:
-+	default:
-+		result = -EOPNOTSUPP;
-+		goto end_unlock;
-+	}
-+
-+	log(L_ASSOC, "new adev->mode=%d\n", adev->mode);
-+	SET_BIT(adev->set_mask, GETSET_MODE);
-+	result = -EINPROGRESS;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_mode(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = 0;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_OFF:
-+		wrqu->mode = IW_MODE_AUTO; break;
-+	case ACX_MODE_MONITOR:
-+		wrqu->mode = IW_MODE_MONITOR; break;
-+	case ACX_MODE_0_ADHOC:
-+		wrqu->mode = IW_MODE_ADHOC; break;
-+	case ACX_MODE_2_STA:
-+		wrqu->mode = IW_MODE_INFRA; break;
-+	case ACX_MODE_3_AP:
-+		wrqu->mode = IW_MODE_MASTER; break;
-+	default:
-+		result = -EOPNOTSUPP;
-+	}
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_set_sens(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->sens;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	adev->sensitivity = (1 == vwrq->disabled) ? 0 : vwrq->value;
-+	SET_BIT(adev->set_mask, GETSET_SENSITIVITY);
-+
-+	acx_sem_unlock(adev);
-+
-+	return -EINPROGRESS;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_sens(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->sens;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	if (IS_USB(adev))
-+		/* setting the PHY reg via fw cmd doesn't work yet */
-+		return -EOPNOTSUPP;
-+
-+	/* acx_sem_lock(adev); */
-+
-+	vwrq->value = adev->sensitivity;
-+	vwrq->disabled = (vwrq->value == 0);
-+	vwrq->fixed = 1;
-+
-+	/* acx_sem_unlock(adev); */
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_ap
-+**
-+** Sets the MAC address of the AP to associate with
-+*/
-+static int
-+acx_ioctl_set_ap(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct sockaddr *awrq = &wrqu->ap_addr;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = 0;
-+	const u8 *ap;
-+
-+	FN_ENTER;
-+	if (NULL == awrq) {
-+		result = -EFAULT;
-+		goto end;
-+	}
-+	if (ARPHRD_ETHER != awrq->sa_family) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	ap = awrq->sa_data;
-+	acxlog_mac(L_IOCTL, "set AP=", ap, "\n");
-+
-+	MAC_COPY(adev->ap, ap);
-+
-+	/* We want to start rescan in managed or ad-hoc mode,
-+	** otherwise just set adev->ap.
-+	** "iwconfig <if> ap <mac> mode managed": we must be able
-+	** to set ap _first_ and _then_ set mode */
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_2_STA:
-+		/* FIXME: if there is a convention on what zero AP means,
-+		** please add a comment about that. I don't know of any --vda */
-+		if (mac_is_zero(ap)) {
-+			/* "off" == 00:00:00:00:00:00 */
-+			MAC_BCAST(adev->ap);
-+			log(L_IOCTL, "Not reassociating\n");
-+		} else {
-+			log(L_IOCTL, "Forcing reassociation\n");
-+			SET_BIT(adev->set_mask, GETSET_RESCAN);
-+		}
-+		break;
-+	}
-+	result = -EINPROGRESS;
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_ap(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct sockaddr *awrq = &wrqu->ap_addr;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	if (ACX_STATUS_4_ASSOCIATED == adev->status) {
-+		/* as seen in Aironet driver, airo.c */
-+		MAC_COPY(awrq->sa_data, adev->bssid);
-+	} else {
-+		MAC_ZERO(awrq->sa_data);
-+	}
-+	awrq->sa_family = ARPHRD_ETHER;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_aplist
-+**
-+** Deprecated in favor of iwscan.
-+** We simply return the list of currently available stations in range,
-+** don't do a new scan.
-+*/
-+static int
-+acx_ioctl_get_aplist(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	struct sockaddr *address = (struct sockaddr *) extra;
-+	struct iw_quality qual[IW_MAX_AP];
-+	int i, cur;
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	/* we have AP list only in STA mode */
-+	if (ACX_MODE_2_STA != adev->mode) {
-+		result = -EOPNOTSUPP;
-+		goto end;
-+	}
-+
-+	cur = 0;
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		struct client *bss = &adev->sta_list[i];
-+		if (!bss->used) continue;
-+		MAC_COPY(address[cur].sa_data, bss->bssid);
-+		address[cur].sa_family = ARPHRD_ETHER;
-+		qual[cur].level = bss->sir;
-+		qual[cur].noise = bss->snr;
-+#ifndef OLD_QUALITY
-+		qual[cur].qual = acx_signal_determine_quality(qual[cur].level,
-+						    qual[cur].noise);
-+#else
-+		qual[cur].qual = (qual[cur].noise <= 100) ?
-+			       100 - qual[cur].noise : 0;
-+#endif
-+		/* no scan: level/noise/qual not updated: */
-+		qual[cur].updated = 0;
-+		cur++;
-+	}
-+	if (cur) {
-+		dwrq->flags = 1;
-+		memcpy(extra + sizeof(struct sockaddr)*cur, &qual,
-+				sizeof(struct iw_quality)*cur);
-+	}
-+	dwrq->length = cur;
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_set_scan(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* don't start scan if device is not up yet */
-+	if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) {
-+		result = -EAGAIN;
-+		goto end_unlock;
-+	}
-+
-+	/* This is NOT a rescan for new AP!
-+	** Do not use SET_BIT(GETSET_RESCAN); */
-+	acx_s_cmd_start_scan(adev);
-+	result = OK;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+/* end: */
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_scan_add_station
-+*/
-+/* helper. not sure whether it's really a _s_leeping fn */
-+static char*
-+acx_s_scan_add_station(
-+	acx_device_t *adev,
-+	char *ptr,
-+	char *end_buf,
-+	struct client *bss)
-+{
-+	struct iw_event iwe;
-+	char *ptr_rate;
-+
-+	FN_ENTER;
-+
-+	/* MAC address has to be added first */
-+	iwe.cmd = SIOCGIWAP;
-+	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-+	MAC_COPY(iwe.u.ap_addr.sa_data, bss->bssid);
-+	acxlog_mac(L_IOCTL, "scan, station address: ", bss->bssid, "\n");
-+	ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_ADDR_LEN);
-+
-+	/* Add ESSID */
-+	iwe.cmd = SIOCGIWESSID;
-+	iwe.u.data.length = bss->essid_len;
-+	iwe.u.data.flags = 1;
-+	log(L_IOCTL, "scan, essid: %s\n", bss->essid);
-+	ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid);
-+
-+	/* Add mode */
-+	iwe.cmd = SIOCGIWMODE;
-+	if (bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)) {
-+		if (bss->cap_info & WF_MGMT_CAP_ESS)
-+			iwe.u.mode = IW_MODE_MASTER;
-+		else
-+			iwe.u.mode = IW_MODE_ADHOC;
-+		log(L_IOCTL, "scan, mode: %d\n", iwe.u.mode);
-+		ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_UINT_LEN);
-+	}
-+
-+	/* Add frequency */
-+	iwe.cmd = SIOCGIWFREQ;
-+	iwe.u.freq.m = acx_channel_freq[bss->channel - 1] * 100000;
-+	iwe.u.freq.e = 1;
-+	log(L_IOCTL, "scan, frequency: %d\n", iwe.u.freq.m);
-+	ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_FREQ_LEN);
-+
-+	/* Add link quality */
-+	iwe.cmd = IWEVQUAL;
-+	/* FIXME: these values should be expressed in dBm, but we don't know
-+	 * how to calibrate it yet */
-+	iwe.u.qual.level = bss->sir;
-+	iwe.u.qual.noise = bss->snr;
-+#ifndef OLD_QUALITY
-+	iwe.u.qual.qual = acx_signal_determine_quality(iwe.u.qual.level,
-+							iwe.u.qual.noise);
-+#else
-+	iwe.u.qual.qual = (iwe.u.qual.noise <= 100) ?
-+				100 - iwe.u.qual.noise : 0;
-+#endif
-+	iwe.u.qual.updated = 7;
-+	log(L_IOCTL, "scan, link quality: %d/%d/%d\n",
-+			iwe.u.qual.level, iwe.u.qual.noise, iwe.u.qual.qual);
-+	ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_QUAL_LEN);
-+
-+	/* Add encryption */
-+	iwe.cmd = SIOCGIWENCODE;
-+	if (bss->cap_info & WF_MGMT_CAP_PRIVACY)
-+		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-+	else
-+		iwe.u.data.flags = IW_ENCODE_DISABLED;
-+	iwe.u.data.length = 0;
-+	log(L_IOCTL, "scan, encryption flags: %X\n", iwe.u.data.flags);
-+	ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid);
-+
-+	/* add rates */
-+	iwe.cmd = SIOCGIWRATE;
-+	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
-+	ptr_rate = ptr + IW_EV_LCP_LEN;
-+
-+	{
-+	u16 rate = bss->rate_cap;
-+	const u8* p = acx_bitpos2ratebyte;
-+	while (rate) {
-+		if (rate & 1) {
-+			iwe.u.bitrate.value = *p * 500000; /* units of 500kb/s */
-+			log(L_IOCTL, "scan, rate: %d\n", iwe.u.bitrate.value);
-+			ptr_rate = iwe_stream_add_value(ptr, ptr_rate, end_buf,
-+						&iwe, IW_EV_PARAM_LEN);
-+		}
-+		rate >>= 1;
-+		p++;
-+	}}
-+
-+	if ((ptr_rate - ptr) > (ptrdiff_t)IW_EV_LCP_LEN)
-+		ptr = ptr_rate;
-+
-+	/* drop remaining station data items for now */
-+
-+	FN_EXIT0;
-+	return ptr;
-+}
-+
-+
-+/***********************************************************************
-+ * acx_ioctl_get_scan
-+ */
-+static int
-+acx_ioctl_get_scan(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	char *ptr = extra;
-+	int i;
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* no scan available if device is not up yet */
-+	if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) {
-+		log(L_IOCTL, "iface not up yet\n");
-+		result = -EAGAIN;
-+		goto end_unlock;
-+	}
-+
-+#ifdef ENODATA_TO_BE_USED_AFTER_SCAN_ERROR_ONLY
-+	if (adev->bss_table_count == 0)	{
-+		/* no stations found */
-+		result = -ENODATA;
-+		goto end_unlock;
-+	}
-+#endif
-+
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		struct client *bss = &adev->sta_list[i];
-+		if (!bss->used) continue;
-+		ptr = acx_s_scan_add_station(adev, ptr,
-+			extra + IW_SCAN_MAX_DATA, bss);
-+	}
-+	dwrq->length = ptr - extra;
-+	dwrq->flags = 0;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+/* end: */
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_essid
-+*/
-+static int
-+acx_ioctl_set_essid(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->essid;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int len = dwrq->length;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (len < 0) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	log(L_IOCTL, "set ESSID '%*s', length %d, flags 0x%04X\n",
-+					len, extra, len, dwrq->flags);
-+
-+#if WIRELESS_EXT >= 21
-+	/* WE 21 gives real ESSID strlen, not +1 (trailing zero):
-+	 * see LKML "[patch] drivers/net/wireless: correct reported ssid lengths" */
-+	len += 1;
-+#endif
-+
-+	acx_sem_lock(adev);
-+
-+	/* ESSID disabled? */
-+	if (0 == dwrq->flags) {
-+		adev->essid_active = 0;
-+
-+	} else {
-+		if (len > IW_ESSID_MAX_SIZE)	{
-+			result = -E2BIG;
-+			goto end_unlock;
-+		}
-+
-+		if (len >= sizeof(adev->essid))
-+			len = sizeof(adev->essid) - 1;
-+		memcpy(adev->essid, extra, len);
-+		adev->essid[len] = '\0';
-+		/* Paranoia: just in case there is a '\0'... */
-+		adev->essid_len = strlen(adev->essid);
-+		adev->essid_active = 1;
-+	}
-+
-+	SET_BIT(adev->set_mask, GETSET_RESCAN);
-+
-+	result = -EINPROGRESS;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_essid(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->essid;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	dwrq->flags = adev->essid_active;
-+	if (adev->essid_active)	{
-+		memcpy(extra, adev->essid, adev->essid_len);
-+		extra[adev->essid_len] = '\0';
-+		dwrq->length = adev->essid_len + 1;
-+		dwrq->flags = 1;
-+	}
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_update_client_rates
-+*/
-+static void
-+acx_l_update_client_rates(acx_device_t *adev, u16 rate)
-+{
-+	int i;
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		client_t *clt = &adev->sta_list[i];
-+		if (!clt->used)	continue;
-+		clt->rate_cfg = (clt->rate_cap & rate);
-+		if (!clt->rate_cfg) {
-+			/* no compatible rates left: kick client */
-+			acxlog_mac(L_ASSOC, "client ",clt->address," kicked: "
-+				"rates are not compatible anymore\n");
-+			acx_l_sta_list_del(adev, clt);
-+			continue;
-+		}
-+		clt->rate_cur &= clt->rate_cfg;
-+		if (!clt->rate_cur) {
-+			/* current rate become invalid, choose a valid one */
-+			clt->rate_cur = 1 << lowest_bit(clt->rate_cfg);
-+		}
-+		if (IS_ACX100(adev))
-+			clt->rate_100 = acx_bitpos2rate100[highest_bit(clt->rate_cur)];
-+		clt->fallback_count = clt->stepup_count = 0;
-+		clt->ignore_count = 16;
-+	}
-+	switch (adev->mode) {
-+	case ACX_MODE_2_STA:
-+		if (adev->ap_client && !adev->ap_client->used) {
-+			/* Owwww... we kicked our AP!! :) */
-+			SET_BIT(adev->set_mask, GETSET_RESCAN);
-+		}
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+/* maps bits from acx111 rate to rate in Mbits */
-+static const unsigned int
-+acx111_rate_tbl[] = {
-+     1000000, /* 0 */
-+     2000000, /* 1 */
-+     5500000, /* 2 */
-+     6000000, /* 3 */
-+     9000000, /* 4 */
-+    11000000, /* 5 */
-+    12000000, /* 6 */
-+    18000000, /* 7 */
-+    22000000, /* 8 */
-+    24000000, /* 9 */
-+    36000000, /* 10 */
-+    48000000, /* 11 */
-+    54000000, /* 12 */
-+      500000, /* 13, should not happen */
-+      500000, /* 14, should not happen */
-+      500000, /* 15, should not happen */
-+};
-+
-+/***********************************************************************
-+ * acx_ioctl_set_rate
-+ */
-+static int
-+acx_ioctl_set_rate(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->param;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	u16 txrate_cfg = 1;
-+	unsigned long flags;
-+	int autorate;
-+	int result = -EINVAL;
-+
-+	FN_ENTER;
-+	log(L_IOCTL, "rate %d fixed 0x%X disabled 0x%X flags 0x%X\n",
-+		vwrq->value, vwrq->fixed, vwrq->disabled, vwrq->flags);
-+
-+	if ((0 == vwrq->fixed) || (1 == vwrq->fixed)) {
-+		int i = VEC_SIZE(acx111_rate_tbl)-1;
-+		if (vwrq->value == -1)
-+			/* "iwconfig rate auto" --> choose highest */
-+			vwrq->value = IS_ACX100(adev) ?	22000000 : 54000000;
-+		while (i >= 0) {
-+			if (vwrq->value == acx111_rate_tbl[i]) {
-+				txrate_cfg <<= i;
-+				i = 0;
-+				break;
-+			}
-+			i--;
-+		}
-+		if (i == -1) { /* no matching rate */
-+			result = -EINVAL;
-+			goto end;
-+		}
-+	} else {	/* rate N, N<1000 (driver specific): we don't use this */
-+		result = -EOPNOTSUPP;
-+		goto end;
-+	}
-+	/* now: only one bit is set in txrate_cfg, corresponding to
-+	** indicated rate */
-+
-+	autorate = (vwrq->fixed == 0) && (RATE111_1 != txrate_cfg);
-+	if (autorate) {
-+		/* convert 00100000 -> 00111111 */
-+		txrate_cfg = (txrate_cfg<<1)-1;
-+	}
-+
-+	if (IS_ACX100(adev)) {
-+		txrate_cfg &= RATE111_ACX100_COMPAT;
-+		if (!txrate_cfg) {
-+			result = -ENOTSUPP; /* rate is not supported by acx100 */
-+			goto end;
-+		}
-+	}
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+
-+	adev->rate_auto = autorate;
-+	adev->rate_oper = txrate_cfg;
-+	adev->rate_basic = txrate_cfg;
-+	/* only do that in auto mode, non-auto will be able to use
-+	 * one specific Tx rate only anyway */
-+	if (autorate) {
-+		/* only use 802.11b base rates, for standard 802.11b H/W
-+		 * compatibility */
-+		adev->rate_basic &= RATE111_80211B_COMPAT;
-+	}
-+	adev->rate_bcast = 1 << lowest_bit(txrate_cfg);
-+	if (IS_ACX100(adev))
-+		adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast);
-+	acx_l_update_ratevector(adev);
-+	acx_l_update_client_rates(adev, txrate_cfg);
-+
-+	/* Do/don't do tx rate fallback; beacon contents and rate */
-+	SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES);
-+	result = -EINPROGRESS;
-+
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_rate
-+*/
-+static int
-+acx_ioctl_get_rate(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->param;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	u16 rate;
-+
-+	acx_lock(adev, flags);
-+	rate = adev->rate_oper;
-+	if (adev->ap_client)
-+		rate = adev->ap_client->rate_cur;
-+	vwrq->value = acx111_rate_tbl[highest_bit(rate)];
-+	vwrq->fixed = !adev->rate_auto;
-+	vwrq->disabled = 0;
-+	acx_unlock(adev, flags);
-+
-+	return OK;
-+}
-+
-+static int
-+acx_ioctl_set_rts(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->rts;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int val = vwrq->value;
-+
-+	if (vwrq->disabled)
-+		val = 2312;
-+	if ((val < 0) || (val > 2312))
-+		return -EINVAL;
-+
-+	adev->rts_threshold = val;
-+	return OK;
-+}
-+
-+static inline int
-+acx_ioctl_get_rts(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->rts;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	vwrq->value = adev->rts_threshold;
-+	vwrq->disabled = (vwrq->value >= 2312);
-+	vwrq->fixed = 1;
-+	return OK;
-+}
-+
-+
-+#if ACX_FRAGMENTATION
-+static int
-+acx_ioctl_set_frag(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int val = vwrq->value;
-+
-+	if (vwrq->disabled)
-+		val = 32767;
-+	else
-+	if ((val < 256) || (val > 2347))
-+		return -EINVAL;
-+
-+	adev->frag_threshold = val;
-+	return OK;
-+}
-+
-+static inline int
-+acx_ioctl_get_frag(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->frag;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	vwrq->value = adev->frag_threshold;
-+	vwrq->disabled = (vwrq->value >= 2347);
-+	vwrq->fixed = 1;
-+	return OK;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_encode
-+*/
-+static int
-+acx_ioctl_set_encode(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->encoding;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int index;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "set encoding flags=0x%04X, size=%d, key: %s\n",
-+			dwrq->flags, dwrq->length, extra ? "set" : "No key");
-+
-+	acx_sem_lock(adev);
-+
-+	index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
-+
-+	if (dwrq->length > 0) {
-+		/* if index is 0 or invalid, use default key */
-+		if ((index < 0) || (index > 3))
-+			index = (int)adev->wep_current_index;
-+
-+		if (0 == (dwrq->flags & IW_ENCODE_NOKEY)) {
-+			if (dwrq->length > 29)
-+				dwrq->length = 29; /* restrict it */
-+
-+			if (dwrq->length > 13) {
-+				/* 29*8 == 232, WEP256 */
-+				adev->wep_keys[index].size = 29;
-+			} else if (dwrq->length > 5) {
-+				/* 13*8 == 104bit, WEP128 */
-+				adev->wep_keys[index].size = 13;
-+			} else if (dwrq->length > 0) {
-+				/* 5*8 == 40bit, WEP64 */
-+				adev->wep_keys[index].size = 5;
-+			} else {
-+				/* disable key */
-+				adev->wep_keys[index].size = 0;
-+			}
-+
-+			memset(adev->wep_keys[index].key, 0,
-+				sizeof(adev->wep_keys[index].key));
-+			memcpy(adev->wep_keys[index].key, extra, dwrq->length);
-+		}
-+	} else {
-+		/* set transmit key */
-+		if ((index >= 0) && (index <= 3))
-+			adev->wep_current_index = index;
-+		else if (0 == (dwrq->flags & IW_ENCODE_MODE)) {
-+			/* complain if we were not just setting
-+			 * the key mode */
-+			result = -EINVAL;
-+			goto end_unlock;
-+		}
-+	}
-+
-+	adev->wep_enabled = !(dwrq->flags & IW_ENCODE_DISABLED);
-+
-+	if (dwrq->flags & IW_ENCODE_OPEN) {
-+		adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM;
-+		adev->wep_restricted = 0;
-+
-+	} else if (dwrq->flags & IW_ENCODE_RESTRICTED) {
-+		adev->auth_alg = WLAN_AUTH_ALG_SHAREDKEY;
-+		adev->wep_restricted = 1;
-+	}
-+
-+	/* set flag to make sure the card WEP settings get updated */
-+	SET_BIT(adev->set_mask, GETSET_WEP);
-+
-+	log(L_IOCTL, "len=%d, key at 0x%p, flags=0x%X\n",
-+		dwrq->length, extra, dwrq->flags);
-+
-+	for (index = 0; index <= 3; index++) {
-+		if (adev->wep_keys[index].size) {
-+			log(L_IOCTL,	"index=%d, size=%d, key at 0x%p\n",
-+				adev->wep_keys[index].index,
-+				(int) adev->wep_keys[index].size,
-+				adev->wep_keys[index].key);
-+		}
-+	}
-+	result = -EINPROGRESS;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_encode
-+*/
-+static int
-+acx_ioctl_get_encode(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->encoding;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
-+
-+	FN_ENTER;
-+
-+	if (adev->wep_enabled == 0) {
-+		dwrq->flags = IW_ENCODE_DISABLED;
-+	} else {
-+		if ((index < 0) || (index > 3))
-+			index = (int)adev->wep_current_index;
-+
-+		dwrq->flags = (adev->wep_restricted == 1) ?
-+				IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN;
-+		dwrq->length = adev->wep_keys[index].size;
-+
-+		memcpy(extra, adev->wep_keys[index].key,
-+			      adev->wep_keys[index].size);
-+	}
-+
-+	/* set the current index */
-+	SET_BIT(dwrq->flags, index + 1);
-+
-+	log(L_IOCTL, "len=%d, key=%p, flags=0x%X\n",
-+	       dwrq->length, dwrq->pointer,
-+	       dwrq->flags);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_set_power(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->power;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = -EINPROGRESS;
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "set 802.11 powersave flags=0x%04X\n", vwrq->flags);
-+
-+	acx_sem_lock(adev);
-+
-+	if (vwrq->disabled) {
-+		CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE);
-+		SET_BIT(adev->set_mask, GETSET_POWER_80211);
-+		goto end;
-+	}
-+	if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
-+		u16 ps_timeout = (vwrq->value * 1024) / 1000;
-+
-+		if (ps_timeout > 255)
-+			ps_timeout = 255;
-+		log(L_IOCTL, "setting PS timeout value to %d time units "
-+				"due to %dus\n", ps_timeout, vwrq->value);
-+		adev->ps_hangover_period = ps_timeout;
-+	} else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) {
-+		u16 ps_periods = vwrq->value / 1000000;
-+
-+		if (ps_periods > 255)
-+			ps_periods = 255;
-+		log(L_IOCTL, "setting PS period value to %d periods "
-+				"due to %dus\n", ps_periods, vwrq->value);
-+		adev->ps_listen_interval = ps_periods;
-+		CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_MODE_MASK);
-+		SET_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_EACH_ITVL);
-+	}
-+
-+	switch (vwrq->flags & IW_POWER_MODE) {
-+		/* FIXME: are we doing the right thing here? */
-+		case IW_POWER_UNICAST_R:
-+			CLEAR_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS);
-+			break;
-+		case IW_POWER_MULTICAST_R:
-+			SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS);
-+			break;
-+		case IW_POWER_ALL_R:
-+			SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS);
-+			break;
-+		case IW_POWER_ON:
-+			break;
-+		default:
-+			log(L_IOCTL, "unknown PS mode\n");
-+			result = -EINVAL;
-+			goto end;
-+	}
-+
-+	SET_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE);
-+	SET_BIT(adev->set_mask, GETSET_POWER_80211);
-+end:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_power(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->power;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "Get 802.11 Power Save flags = 0x%04X\n", vwrq->flags);
-+	vwrq->disabled = ((adev->ps_wakeup_cfg & PS_CFG_ENABLE) == 0);
-+	if (vwrq->disabled)
-+		goto end;
-+
-+	if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
-+		vwrq->value = adev->ps_hangover_period * 1000 / 1024;
-+		vwrq->flags = IW_POWER_TIMEOUT;
-+	} else {
-+		vwrq->value = adev->ps_listen_interval * 1000000;
-+		vwrq->flags = IW_POWER_PERIOD|IW_POWER_RELATIVE;
-+	}
-+	if (adev->ps_options & PS_OPT_STILL_RCV_BCASTS)
-+		SET_BIT(vwrq->flags, IW_POWER_ALL_R);
-+	else
-+		SET_BIT(vwrq->flags, IW_POWER_UNICAST_R);
-+end:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_txpow
-+*/
-+static inline int
-+acx_ioctl_get_txpow(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->power;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	vwrq->flags = IW_TXPOW_DBM;
-+	vwrq->disabled = 0;
-+	vwrq->fixed = 1;
-+	vwrq->value = adev->tx_level_dbm;
-+
-+	log(L_IOCTL, "get txpower:%d dBm\n", adev->tx_level_dbm);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_txpow
-+*/
-+static int
-+acx_ioctl_set_txpow(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->power;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "set txpower:%d, disabled:%d, flags:0x%04X\n",
-+			vwrq->value, vwrq->disabled, vwrq->flags);
-+
-+	acx_sem_lock(adev);
-+
-+	if (vwrq->disabled != adev->tx_disabled) {
-+		SET_BIT(adev->set_mask, GETSET_TX);
-+	}
-+
-+	adev->tx_disabled = vwrq->disabled;
-+	if (vwrq->value == -1) {
-+		if (vwrq->disabled) {
-+			adev->tx_level_dbm = 0;
-+			log(L_IOCTL, "disable radio tx\n");
-+		} else {
-+			/* adev->tx_level_auto = 1; */
-+			log(L_IOCTL, "set tx power auto (NIY)\n");
-+		}
-+	} else {
-+		adev->tx_level_dbm = vwrq->value <= 20 ? vwrq->value : 20;
-+		/* adev->tx_level_auto = 0; */
-+		log(L_IOCTL, "set txpower=%d dBm\n", adev->tx_level_dbm);
-+	}
-+	SET_BIT(adev->set_mask, GETSET_TXPOWER);
-+
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_range
-+*/
-+static int
-+acx_ioctl_get_range(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	struct iw_range *range = (struct iw_range *)extra;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int i,n;
-+
-+	FN_ENTER;
-+
-+	if (!dwrq->pointer)
-+		goto end;
-+
-+	dwrq->length = sizeof(struct iw_range);
-+	memset(range, 0, sizeof(struct iw_range));
-+	n = 0;
-+	for (i = 1; i <= 14; i++) {
-+		if (adev->reg_dom_chanmask & (1 << (i - 1))) {
-+			range->freq[n].i = i;
-+			range->freq[n].m = acx_channel_freq[i - 1] * 100000;
-+			range->freq[n].e = 1; /* units are MHz */
-+			n++;
-+		}
-+	}
-+	range->num_channels = n;
-+	range->num_frequency = n;
-+
-+	range->min_rts = 0;
-+	range->max_rts = 2312;
-+
-+#if ACX_FRAGMENTATION
-+	range->min_frag = 256;
-+	range->max_frag = 2312;
-+#endif
-+
-+	range->encoding_size[0] = 5;
-+	range->encoding_size[1] = 13;
-+	range->encoding_size[2] = 29;
-+	range->num_encoding_sizes = 3;
-+	range->max_encoding_tokens = 4;
-+
-+	range->min_pmp = 0;
-+	range->max_pmp = 5000000;
-+	range->min_pmt = 0;
-+	range->max_pmt = 65535 * 1000;
-+	range->pmp_flags = IW_POWER_PERIOD;
-+	range->pmt_flags = IW_POWER_TIMEOUT;
-+	range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R;
-+
-+	if (IS_ACX100(adev)) { /* ACX100 has direct radio programming - arbitrary levels, so offer a lot */
-+		for (i = 0; i <= IW_MAX_TXPOWER - 1; i++)
-+			range->txpower[i] = 20 * i / (IW_MAX_TXPOWER - 1);
-+		range->num_txpower = IW_MAX_TXPOWER;
-+		range->txpower_capa = IW_TXPOW_DBM;
-+	}
-+	else {
-+		int count = min(IW_MAX_TXPOWER, (int)adev->cfgopt_power_levels.len);
-+		for (i = 0; i <= count; i++)
-+			range->txpower[i] = adev->cfgopt_power_levels.list[i];
-+		range->num_txpower = count;
-+		/* this list is given in mW */
-+		range->txpower_capa = IW_TXPOW_MWATT;
-+	}
-+
-+	range->we_version_compiled = WIRELESS_EXT;
-+	range->we_version_source = 0x9;
-+
-+	range->retry_capa = IW_RETRY_LIMIT;
-+	range->retry_flags = IW_RETRY_LIMIT;
-+	range->min_retry = 1;
-+	range->max_retry = 255;
-+
-+	range->r_time_flags = IW_RETRY_LIFETIME;
-+	range->min_r_time = 0;
-+	/* FIXME: lifetime ranges and orders of magnitude are strange?? */
-+	range->max_r_time = 65535;
-+
-+	if (IS_USB(adev))
-+		range->sensitivity = 0;
-+	else if (IS_ACX111(adev))
-+		range->sensitivity = 3;
-+	else
-+		range->sensitivity = 255;
-+
-+	for (i=0; i < adev->rate_supported_len; i++) {
-+		range->bitrate[i] = (adev->rate_supported[i] & ~0x80) * 500000;
-+		/* never happens, but keep it, to be safe: */
-+		if (range->bitrate[i] == 0)
-+			break;
-+	}
-+	range->num_bitrates = i;
-+
-+	range->max_qual.qual = 100;
-+	range->max_qual.level = 100;
-+	range->max_qual.noise = 100;
-+	/* TODO: better values */
-+	range->avg_qual.qual = 90;
-+	range->avg_qual.level = 80;
-+	range->avg_qual.noise = 2;
-+
-+end:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** Private functions
-+*/
-+
-+/***********************************************************************
-+** acx_ioctl_get_nick
-+*/
-+static inline int
-+acx_ioctl_get_nick(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	strcpy(extra, adev->nick);
-+	dwrq->length = strlen(extra) + 1;
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_nick
-+*/
-+static int
-+acx_ioctl_set_nick(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	if (dwrq->length > IW_ESSID_MAX_SIZE + 1) {
-+		result = -E2BIG;
-+		goto end_unlock;
-+	}
-+
-+	/* extra includes trailing \0, so it's ok */
-+	strcpy(adev->nick, extra);
-+	result = OK;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_retry
-+*/
-+static int
-+acx_ioctl_get_retry(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->retry;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned int type = vwrq->flags & IW_RETRY_TYPE;
-+	unsigned int modifier = vwrq->flags & IW_RETRY_MODIFIER;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* return the short retry number by default */
-+	if (type == IW_RETRY_LIFETIME) {
-+		vwrq->flags = IW_RETRY_LIFETIME;
-+		vwrq->value = adev->msdu_lifetime;
-+	} else if (modifier == IW_RETRY_MAX) {
-+		vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
-+		vwrq->value = adev->long_retry;
-+	} else {
-+		vwrq->flags = IW_RETRY_LIMIT;
-+		if (adev->long_retry != adev->short_retry)
-+			SET_BIT(vwrq->flags, IW_RETRY_MIN);
-+		vwrq->value = adev->short_retry;
-+	}
-+
-+	/* can't be disabled */
-+	vwrq->disabled = (u8)0;
-+	result = OK;
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_retry
-+*/
-+static int
-+acx_ioctl_set_retry(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->retry;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (!vwrq) {
-+		result = -EFAULT;
-+		goto end;
-+	}
-+	if (vwrq->disabled) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	result = -EINVAL;
-+	if (IW_RETRY_LIMIT == (vwrq->flags & IW_RETRY_TYPE)) {
-+		printk("old retry limits: short %d long %d\n",
-+				adev->short_retry, adev->long_retry);
-+		if (vwrq->flags & IW_RETRY_MAX) {
-+			adev->long_retry = vwrq->value;
-+		} else if (vwrq->flags & IW_RETRY_MIN) {
-+			adev->short_retry = vwrq->value;
-+		} else {
-+			/* no modifier: set both */
-+			adev->long_retry = vwrq->value;
-+			adev->short_retry = vwrq->value;
-+		}
-+		printk("new retry limits: short %d long %d\n",
-+				adev->short_retry, adev->long_retry);
-+		SET_BIT(adev->set_mask, GETSET_RETRY);
-+		result = -EINPROGRESS;
-+	}
-+	else if (vwrq->flags & IW_RETRY_LIFETIME) {
-+		adev->msdu_lifetime = vwrq->value;
-+		printk("new MSDU lifetime: %d\n", adev->msdu_lifetime);
-+		SET_BIT(adev->set_mask, SET_MSDU_LIFETIME);
-+		result = -EINPROGRESS;
-+	}
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/************************ private ioctls ******************************/
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_debug
-+*/
-+#if ACX_DEBUG
-+static int
-+acx_ioctl_set_debug(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	unsigned int debug_new = *((unsigned int *)extra);
-+	int result = -EINVAL;
-+
-+	log(L_ANY, "setting debug from %04X to %04X\n", acx_debug, debug_new);
-+	acx_debug = debug_new;
-+
-+	result = OK;
-+	return result;
-+
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_ioctl_list_reg_domain
-+*/
-+static int
-+acx_ioctl_list_reg_domain(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	int i = 1;
-+	const char * const *entry = acx_reg_domain_strings;
-+
-+	printk("dom# chan# domain/country\n");
-+	while (*entry)
-+		printk("%4d %s\n", i++, *entry++);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_reg_domain
-+*/
-+static int
-+acx_ioctl_set_reg_domain(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if ((*extra < 1) || ((size_t)*extra > acx_reg_domain_ids_len)) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	adev->reg_dom_id = acx_reg_domain_ids[*extra - 1];
-+	SET_BIT(adev->set_mask, GETSET_REG_DOMAIN);
-+
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_reg_domain
-+*/
-+static int
-+acx_ioctl_get_reg_domain(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int dom,i;
-+
-+	/* no locking */
-+	dom = adev->reg_dom_id;
-+
-+	for (i = 1; i <= acx_reg_domain_ids_len; i++) {
-+		if (acx_reg_domain_ids[i-1] == dom) {
-+			log(L_IOCTL, "regulatory domain is currently set "
-+				"to %d (0x%X): %s\n", i, dom,
-+				acx_reg_domain_strings[i-1]);
-+			*extra = i;
-+			break;
-+		}
-+	}
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_short_preamble
-+*/
-+static const char * const
-+preamble_modes[] = {
-+	"off",
-+	"on",
-+	"auto (peer capability dependent)",
-+	"unknown mode, error"
-+};
-+
-+static int
-+acx_ioctl_set_short_preamble(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int i;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if ((unsigned char)*extra > 2) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	adev->preamble_mode = (u8)*extra;
-+	switch (adev->preamble_mode) {
-+	case 0: /* long */
-+		adev->preamble_cur = 0;
-+		break;
-+	case 1:
-+		/* short, kick incapable peers */
-+		adev->preamble_cur = 1;
-+		for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+			client_t *clt = &adev->sta_list[i];
-+			if (!clt->used) continue;
-+			if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) {
-+				clt->used = CLIENT_EMPTY_SLOT_0;
-+			}
-+		}
-+		switch (adev->mode) {
-+		case ACX_MODE_2_STA:
-+			if (adev->ap_client && !adev->ap_client->used) {
-+				/* We kicked our AP :) */
-+				SET_BIT(adev->set_mask, GETSET_RESCAN);
-+			}
-+		}
-+		break;
-+	case 2: /* auto. short only if all peers are short-capable */
-+		adev->preamble_cur = 1;
-+		for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+			client_t *clt = &adev->sta_list[i];
-+			if (!clt->used) continue;
-+			if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) {
-+				adev->preamble_cur = 0;
-+				break;
-+			}
-+		}
-+		break;
-+	}
-+	printk("new short preamble setting: configured %s, active %s\n",
-+			preamble_modes[adev->preamble_mode],
-+			preamble_modes[adev->preamble_cur]);
-+	result = OK;
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_short_preamble
-+*/
-+static int
-+acx_ioctl_get_short_preamble(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	printk("current short preamble setting: configured %s, active %s\n",
-+			preamble_modes[adev->preamble_mode],
-+			preamble_modes[adev->preamble_cur]);
-+
-+	*extra = (char)adev->preamble_mode;
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_antenna
-+**
-+** TX and RX antenna can be set separately but this function good
-+** for testing 0-4 bits
-+*/
-+static int
-+acx_ioctl_set_antenna(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	printk("old antenna value: 0x%02X (COMBINED bit mask)\n"
-+		     "Rx antenna selection:\n"
-+		     "0x00 ant. 1\n"
-+		     "0x40 ant. 2\n"
-+		     "0x80 full diversity\n"
-+		     "0xc0 partial diversity\n"
-+		     "0x0f dwell time mask (in units of us)\n"
-+		     "Tx antenna selection:\n"
-+		     "0x00 ant. 2\n" /* yep, those ARE reversed! */
-+		     "0x20 ant. 1\n"
-+		     "new antenna value: 0x%02X\n",
-+		     adev->antenna, (u8)*extra);
-+
-+	adev->antenna = (u8)*extra;
-+	SET_BIT(adev->set_mask, GETSET_ANTENNA);
-+
-+	acx_sem_unlock(adev);
-+
-+	return -EINPROGRESS;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_antenna
-+*/
-+static int
-+acx_ioctl_get_antenna(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	/* no locking. it's pointless to lock a single load */
-+	printk("current antenna value: 0x%02X (COMBINED bit mask)\n"
-+		     "Rx antenna selection:\n"
-+		     "0x00 ant. 1\n"
-+		     "0x40 ant. 2\n"
-+		     "0x80 full diversity\n"
-+		     "0xc0 partial diversity\n"
-+		     "Tx antenna selection:\n"
-+		     "0x00 ant. 2\n" /* yep, those ARE reversed! */
-+		     "0x20 ant. 1\n", adev->antenna);
-+
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_rx_antenna
-+**
-+** 0 = antenna1; 1 = antenna2; 2 = full diversity; 3 = partial diversity
-+** Could anybody test which antenna is the external one?
-+*/
-+static int
-+acx_ioctl_set_rx_antenna(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (*extra > 3) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	printk("old antenna value: 0x%02X\n", adev->antenna);
-+
-+	acx_sem_lock(adev);
-+
-+	adev->antenna &= 0x3f;
-+	SET_BIT(adev->antenna, (*extra << 6));
-+	SET_BIT(adev->set_mask, GETSET_ANTENNA);
-+	printk("new antenna value: 0x%02X\n", adev->antenna);
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_tx_antenna
-+**
-+** Arguments: 0 == antenna2; 1 == antenna1;
-+** Could anybody test which antenna is the external one?
-+*/
-+static int
-+acx_ioctl_set_tx_antenna(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (*extra > 1) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	printk("old antenna value: 0x%02X\n", adev->antenna);
-+
-+	acx_sem_lock(adev);
-+
-+	adev->antenna &= ~0x30;
-+	SET_BIT(adev->antenna, ((*extra & 0x01) << 5));
-+	SET_BIT(adev->set_mask, GETSET_ANTENNA);
-+	printk("new antenna value: 0x%02X\n", adev->antenna);
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_wlansniff
-+**
-+** can we just remove this in favor of monitor mode? --vda
-+*/
-+static int
-+acx_ioctl_wlansniff(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned int *params = (unsigned int*)extra;
-+	unsigned int enable = (unsigned int)(params[0] > 0);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* not using printk() here, since it distorts kismet display
-+	 * when printk messages activated */
-+	log(L_IOCTL, "setting monitor to: 0x%02X\n", params[0]);
-+
-+	switch (params[0]) {
-+	case 0:
-+		/* no monitor mode. hmm, should we simply ignore it
-+		 * or go back to enabling adev->netdev->type ARPHRD_ETHER? */
-+		break;
-+	case 1:
-+		adev->monitor_type = ARPHRD_IEEE80211_PRISM;
-+		break;
-+	case 2:
-+		adev->monitor_type = ARPHRD_IEEE80211;
-+		break;
-+	}
-+
-+	if (params[0]) {
-+		adev->mode = ACX_MODE_MONITOR;
-+		SET_BIT(adev->set_mask, GETSET_MODE);
-+	}
-+
-+	if (enable) {
-+		adev->channel = params[1];
-+		SET_BIT(adev->set_mask, GETSET_RX);
-+	}
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_unknown11
-+** FIXME: looks like some sort of "iwpriv kick_sta MAC" but it's broken
-+*/
-+static int
-+acx_ioctl_unknown11(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+#ifdef BROKEN
-+	struct iw_param *vwrq = &wrqu->param;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	client_t client;
-+	int result;
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+
-+	acx_l_transmit_disassoc(adev, &client);
-+	result = OK;
-+
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+#endif
-+	return -EINVAL;
-+}
-+
-+
-+/***********************************************************************
-+** debug helper function to be able to debug various issues relatively easily
-+*/
-+static int
-+acx_ioctl_dbg_set_masks(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	const unsigned int *params = (unsigned int*)extra;
-+	int result;
-+
-+	acx_sem_lock(adev);
-+
-+	log(L_IOCTL, "setting flags in settings mask: "
-+			"get_mask %08X set_mask %08X\n"
-+			"before: get_mask %08X set_mask %08X\n",
-+			params[0], params[1],
-+			adev->get_mask, adev->set_mask);
-+	SET_BIT(adev->get_mask, params[0]);
-+	SET_BIT(adev->set_mask, params[1]);
-+	log(L_IOCTL, "after: get_mask %08X set_mask %08X\n",
-+			adev->get_mask, adev->set_mask);
-+	result = -EINPROGRESS; /* immediately call commit handler */
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+* acx_ioctl_set_rates
-+*
-+* This ioctl takes string parameter. Examples:
-+* iwpriv wlan0 SetRates "1,2"
-+*	use 1 and 2 Mbit rates, both are in basic rate set
-+* iwpriv wlan0 SetRates "1,2 5,11"
-+*	use 1,2,5.5,11 Mbit rates. 1 and 2 are basic
-+* iwpriv wlan0 SetRates "1,2 5c,11c"
-+*	same ('c' means 'CCK modulation' and it is a default for 5 and 11)
-+* iwpriv wlan0 SetRates "1,2 5p,11p"
-+*	use 1,2,5.5,11 Mbit, 1,2 are basic. 5 and 11 are using PBCC
-+* iwpriv wlan0 SetRates "1,2,5,11 22p"
-+*	use 1,2,5.5,11,22 Mbit. 1,2,5.5 and 11 are basic. 22 is using PBCC
-+*	(this is the maximum acx100 can do (modulo x4 mode))
-+* iwpriv wlan0 SetRates "1,2,5,11 22"
-+*	same. 802.11 defines only PBCC modulation
-+*	for 22 and 33 Mbit rates, so there is no ambiguity
-+* iwpriv wlan0 SetRates "1,2,5,11 6o,9o,12o,18o,24o,36o,48o,54o"
-+*	1,2,5.5 and 11 are basic. 11g OFDM rates are enabled but
-+*	they are not in basic rate set.	22 Mbit is disabled.
-+* iwpriv wlan0 SetRates "1,2,5,11 6,9,12,18,24,36,48,54"
-+*	same. OFDM is default for 11g rates except 22 and 33 Mbit,
-+*	thus 'o' is optional
-+* iwpriv wlan0 SetRates "1,2,5,11 6d,9d,12d,18d,24d,36d,48d,54d"
-+*	1,2,5.5 and 11 are basic. 11g CCK-OFDM rates are enabled
-+*	(acx111 does not support CCK-OFDM, driver will reject this cmd)
-+* iwpriv wlan0 SetRates "6,9,12 18,24,36,48,54"
-+*	6,9,12 are basic, rest of 11g rates is enabled. Using OFDM
-+*/
-+#include "setrate.c"
-+
-+/* disallow: 33Mbit (unsupported by hw) */
-+/* disallow: CCKOFDM (unsupported by hw) */
-+static int
-+acx111_supported(int mbit, int modulation, void *opaque)
-+{
-+	if (mbit==33) return -ENOTSUPP;
-+	if (modulation==DOT11_MOD_CCKOFDM) return -ENOTSUPP;
-+	return OK;
-+}
-+
-+static const u16
-+acx111mask[] = {
-+	[DOT11_RATE_1 ] = RATE111_1 ,
-+	[DOT11_RATE_2 ] = RATE111_2 ,
-+	[DOT11_RATE_5 ] = RATE111_5 ,
-+	[DOT11_RATE_11] = RATE111_11,
-+	[DOT11_RATE_22] = RATE111_22,
-+	/* [DOT11_RATE_33] = */
-+	[DOT11_RATE_6 ] = RATE111_6 ,
-+	[DOT11_RATE_9 ] = RATE111_9 ,
-+	[DOT11_RATE_12] = RATE111_12,
-+	[DOT11_RATE_18] = RATE111_18,
-+	[DOT11_RATE_24] = RATE111_24,
-+	[DOT11_RATE_36] = RATE111_36,
-+	[DOT11_RATE_48] = RATE111_48,
-+	[DOT11_RATE_54] = RATE111_54,
-+};
-+
-+static u32
-+acx111_gen_mask(int mbit, int modulation, void *opaque)
-+{
-+	/* lower 16 bits show selected 1, 2, CCK and OFDM rates */
-+	/* upper 16 bits show selected PBCC rates */
-+	u32 m = acx111mask[rate_mbit2enum(mbit)];
-+	if (modulation==DOT11_MOD_PBCC)
-+		return m<<16;
-+	return m;
-+}
-+
-+static int
-+verify_rate(u32 rate, int chip_type)
-+{
-+	/* never happens. be paranoid */
-+	if (!rate) return -EINVAL;
-+
-+	/* disallow: mixing PBCC and CCK at 5 and 11Mbit
-+	** (can be supported, but needs complicated handling in tx code) */
-+	if (( rate & ((RATE111_11+RATE111_5)<<16) )
-+	&&  ( rate & (RATE111_11+RATE111_5) )
-+	) {
-+		return -ENOTSUPP;
-+	}
-+	if (CHIPTYPE_ACX100 == chip_type) {
-+		if ( rate & ~(RATE111_ACX100_COMPAT+(RATE111_ACX100_COMPAT<<16)) )
-+			return -ENOTSUPP;
-+	}
-+	return 0;
-+}
-+
-+static int
-+acx_ioctl_set_rates(struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	int result;
-+	u32 brate = 0, orate = 0; /* basic, operational rate set */
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "set_rates %s\n", extra);
-+	result = fill_ratemasks(extra, &brate, &orate,
-+				acx111_supported, acx111_gen_mask, 0);
-+	if (result) goto end;
-+	SET_BIT(orate, brate);
-+	log(L_IOCTL, "brate %08X orate %08X\n", brate, orate);
-+
-+	result = verify_rate(brate, adev->chip_type);
-+	if (result) goto end;
-+	result = verify_rate(orate, adev->chip_type);
-+	if (result) goto end;
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+
-+	adev->rate_basic = brate;
-+	adev->rate_oper = orate;
-+	/* TODO: ideally, we shall monitor highest basic rate
-+	** which was successfully sent to every peer
-+	** (say, last we checked, everybody could hear 5.5 Mbits)
-+	** and use that for bcasts when we want to reach all peers.
-+	** For beacons, we probably shall use lowest basic rate
-+	** because we want to reach all *potential* new peers too */
-+	adev->rate_bcast = 1 << lowest_bit(brate);
-+	if (IS_ACX100(adev))
-+		adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast);
-+	adev->rate_auto = !has_only_one_bit(orate);
-+	acx_l_update_client_rates(adev, orate);
-+	/* TODO: get rid of ratevector, build it only when needed */
-+	acx_l_update_ratevector(adev);
-+
-+	/* Do/don't do tx rate fallback; beacon contents and rate */
-+	SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES);
-+	result = -EINPROGRESS;
-+
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_phy_chan_busy_percentage
-+*/
-+static int
-+acx_ioctl_get_phy_chan_busy_percentage(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	struct {
-+		u16 type;
-+		u16 len;
-+		u32 busytime;
-+		u32 totaltime;
-+	} ACX_PACKED usage;
-+	int result;
-+
-+	acx_sem_lock(adev);
-+
-+	if (OK != acx_s_interrogate(adev, &usage, ACX1xx_IE_MEDIUM_USAGE)) {
-+		result = NOT_OK;
-+		goto end_unlock;
-+	}
-+
-+	usage.busytime = le32_to_cpu(usage.busytime);
-+	usage.totaltime = le32_to_cpu(usage.totaltime);
-+	
-+	/* yes, this is supposed to be "Medium" (singular of media),
-+	   not "average"! OK, reword the message to make it obvious... */
-+	printk("%s: busy percentage of medium (since last invocation): %d%% "
-+		"(%u of %u microseconds)\n",
-+		ndev->name,
-+		usage.busytime / ((usage.totaltime / 100) + 1),
-+		usage.busytime, usage.totaltime);
-+
-+	result = OK;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_ed_threshold
-+*/
-+static inline int
-+acx_ioctl_set_ed_threshold(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	printk("old ED threshold value: %d\n", adev->ed_threshold);
-+	adev->ed_threshold = (unsigned char)*extra;
-+	printk("new ED threshold value: %d\n", (unsigned char)*extra);
-+	SET_BIT(adev->set_mask, GETSET_ED_THRESH);
-+
-+	acx_sem_unlock(adev);
-+
-+	return -EINPROGRESS;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_cca
-+*/
-+static inline int
-+acx_ioctl_set_cca(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	acx_sem_lock(adev);
-+
-+	printk("old CCA value: 0x%02X\n", adev->cca);
-+	adev->cca = (unsigned char)*extra;
-+	printk("new CCA value: 0x%02X\n", (unsigned char)*extra);
-+	SET_BIT(adev->set_mask, GETSET_CCA);
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static const char * const
-+scan_modes[] = { "active", "passive", "background" };
-+
-+static void
-+acx_print_scan_params(acx_device_t *adev, const char* head)
-+{
-+	printk("%s: %smode %d (%s), min chan time %dTU, "
-+		"max chan time %dTU, max scan rate byte: %d\n",
-+		adev->ndev->name, head,
-+		adev->scan_mode, scan_modes[adev->scan_mode],
-+		adev->scan_probe_delay, adev->scan_duration, adev->scan_rate);
-+}
-+
-+static int
-+acx_ioctl_set_scan_params(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+	const int *params = (int *)extra;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_print_scan_params(adev, "old scan parameters: ");
-+	if ((params[0] != -1) && (params[0] >= 0) && (params[0] <= 2))
-+		adev->scan_mode = params[0];
-+	if (params[1] != -1)
-+		adev->scan_probe_delay = params[1];
-+	if (params[2] != -1)
-+		adev->scan_duration = params[2];
-+	if ((params[3] != -1) && (params[3] <= 255))
-+		adev->scan_rate = params[3];
-+	acx_print_scan_params(adev, "new scan parameters: ");
-+	SET_BIT(adev->set_mask, GETSET_RESCAN);
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+static int
-+acx_ioctl_get_scan_params(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+	int *params = (int *)extra;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_print_scan_params(adev, "current scan parameters: ");
-+	params[0] = adev->scan_mode;
-+	params[1] = adev->scan_probe_delay;
-+	params[2] = adev->scan_duration;
-+	params[3] = adev->scan_rate;
-+	result = OK;
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx100_ioctl_set_led_power(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	static const char * const led_modes[] = { "off", "on", "LinkQuality" };
-+
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	acx_sem_lock(adev);
-+
-+	printk("%s: power LED status: old %d (%s), ",
-+			ndev->name,
-+			adev->led_power,
-+			led_modes[adev->led_power]);
-+	adev->led_power = extra[0];
-+	if (adev->led_power > 2) adev->led_power = 2;
-+	printk("new %d (%s)\n",
-+			adev->led_power,
-+			led_modes[adev->led_power]);
-+
-+	if (adev->led_power == 2) {
-+		printk("%s: max link quality setting: old %d, ",
-+			ndev->name, adev->brange_max_quality);
-+		if (extra[1])
-+			adev->brange_max_quality = extra[1];
-+		printk("new %d\n", adev->brange_max_quality);
-+	}
-+
-+	SET_BIT(adev->set_mask, GETSET_LED_POWER);
-+
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static inline int
-+acx100_ioctl_get_led_power(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	extra[0] = adev->led_power;
-+	if (adev->led_power == 2)
-+		extra[1] = adev->brange_max_quality;
-+	else
-+		extra[1] = -1;
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx111_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->param;
-+	if (!IS_PCI(ndev2adev(ndev)))
-+		return OK;
-+	return acx111pci_ioctl_info(ndev, info, vwrq, extra);
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx100_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->param;
-+	if (IS_USB(ndev2adev(ndev))) {
-+		printk("acx: set_phy_amp_bias() is not supported on USB\n");
-+		return OK;
-+	}
-+#ifdef ACX_MEM
-+	return acx100mem_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra);
-+#else
-+	return acx100pci_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra);
-+#endif
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static const iw_handler acx_ioctl_handler[] =
-+{
-+	acx_ioctl_commit,		/* SIOCSIWCOMMIT */
-+	acx_ioctl_get_name,		/* SIOCGIWNAME */
-+	NULL,				/* SIOCSIWNWID */
-+	NULL,				/* SIOCGIWNWID */
-+	acx_ioctl_set_freq,		/* SIOCSIWFREQ */
-+	acx_ioctl_get_freq,		/* SIOCGIWFREQ */
-+	acx_ioctl_set_mode,		/* SIOCSIWMODE */
-+	acx_ioctl_get_mode,		/* SIOCGIWMODE */
-+	acx_ioctl_set_sens,		/* SIOCSIWSENS */
-+	acx_ioctl_get_sens,		/* SIOCGIWSENS */
-+	NULL,				/* SIOCSIWRANGE */
-+	acx_ioctl_get_range,		/* SIOCGIWRANGE */
-+	NULL,				/* SIOCSIWPRIV */
-+	NULL,				/* SIOCGIWPRIV */
-+	NULL,				/* SIOCSIWSTATS */
-+	NULL,				/* SIOCGIWSTATS */
-+#if IW_HANDLER_VERSION > 4
-+	iw_handler_set_spy,		/* SIOCSIWSPY */
-+	iw_handler_get_spy,		/* SIOCGIWSPY */
-+	iw_handler_set_thrspy,		/* SIOCSIWTHRSPY */
-+	iw_handler_get_thrspy,		/* SIOCGIWTHRSPY */
-+#else /* IW_HANDLER_VERSION > 4 */
-+#ifdef WIRELESS_SPY
-+	NULL /* acx_ioctl_set_spy FIXME */,	/* SIOCSIWSPY */
-+	NULL /* acx_ioctl_get_spy */,	/* SIOCGIWSPY */
-+#else /* WSPY */
-+	NULL,				/* SIOCSIWSPY */
-+	NULL,				/* SIOCGIWSPY */
-+#endif /* WSPY */
-+	NULL,				/* [nothing] */
-+	NULL,				/* [nothing] */
-+#endif /* IW_HANDLER_VERSION > 4 */
-+	acx_ioctl_set_ap,		/* SIOCSIWAP */
-+	acx_ioctl_get_ap,		/* SIOCGIWAP */
-+	NULL,				/* [nothing] */
-+	acx_ioctl_get_aplist,		/* SIOCGIWAPLIST */
-+	acx_ioctl_set_scan,		/* SIOCSIWSCAN */
-+	acx_ioctl_get_scan,		/* SIOCGIWSCAN */
-+	acx_ioctl_set_essid,		/* SIOCSIWESSID */
-+	acx_ioctl_get_essid,		/* SIOCGIWESSID */
-+	acx_ioctl_set_nick,		/* SIOCSIWNICKN */
-+	acx_ioctl_get_nick,		/* SIOCGIWNICKN */
-+	NULL,				/* [nothing] */
-+	NULL,				/* [nothing] */
-+	acx_ioctl_set_rate,		/* SIOCSIWRATE */
-+	acx_ioctl_get_rate,		/* SIOCGIWRATE */
-+	acx_ioctl_set_rts,		/* SIOCSIWRTS */
-+	acx_ioctl_get_rts,		/* SIOCGIWRTS */
-+#if ACX_FRAGMENTATION
-+	acx_ioctl_set_frag,		/* SIOCSIWFRAG */
-+	acx_ioctl_get_frag,		/* SIOCGIWFRAG */
-+#else
-+	NULL,				/* SIOCSIWFRAG */
-+	NULL,				/* SIOCGIWFRAG */
-+#endif
-+	acx_ioctl_set_txpow,		/* SIOCSIWTXPOW */
-+	acx_ioctl_get_txpow,		/* SIOCGIWTXPOW */
-+	acx_ioctl_set_retry,		/* SIOCSIWRETRY */
-+	acx_ioctl_get_retry,		/* SIOCGIWRETRY */
-+	acx_ioctl_set_encode,		/* SIOCSIWENCODE */
-+	acx_ioctl_get_encode,		/* SIOCGIWENCODE */
-+	acx_ioctl_set_power,		/* SIOCSIWPOWER */
-+	acx_ioctl_get_power,		/* SIOCGIWPOWER */
-+};
-+
-+
-+/***********************************************************************
-+*/
-+
-+/* if you plan to reorder something, make sure to reorder all other places
-+ * accordingly! */
-+/* SET/GET convention: SETs must have even position, GETs odd */
-+#define ACX100_IOCTL SIOCIWFIRSTPRIV
-+enum {
-+	ACX100_IOCTL_DEBUG = ACX100_IOCTL,
-+	ACX100_IOCTL_GET__________UNUSED1,
-+	ACX100_IOCTL_SET_PLED,
-+	ACX100_IOCTL_GET_PLED,
-+	ACX100_IOCTL_SET_RATES,
-+	ACX100_IOCTL_LIST_DOM,
-+	ACX100_IOCTL_SET_DOM,
-+	ACX100_IOCTL_GET_DOM,
-+	ACX100_IOCTL_SET_SCAN_PARAMS,
-+	ACX100_IOCTL_GET_SCAN_PARAMS,
-+	ACX100_IOCTL_SET_PREAMB,
-+	ACX100_IOCTL_GET_PREAMB,
-+	ACX100_IOCTL_SET_ANT,
-+	ACX100_IOCTL_GET_ANT,
-+	ACX100_IOCTL_RX_ANT,
-+	ACX100_IOCTL_TX_ANT,
-+	ACX100_IOCTL_SET_PHY_AMP_BIAS,
-+	ACX100_IOCTL_GET_PHY_CHAN_BUSY,
-+	ACX100_IOCTL_SET_ED,
-+	ACX100_IOCTL_GET__________UNUSED3,
-+	ACX100_IOCTL_SET_CCA,
-+	ACX100_IOCTL_GET__________UNUSED4,
-+	ACX100_IOCTL_MONITOR,
-+	ACX100_IOCTL_TEST,
-+	ACX100_IOCTL_DBG_SET_MASKS,
-+	ACX111_IOCTL_INFO,
-+	ACX100_IOCTL_DBG_SET_IO,
-+	ACX100_IOCTL_DBG_GET_IO
-+};
-+
-+
-+static const iw_handler acx_ioctl_private_handler[] =
-+{
-+#if ACX_DEBUG
-+[ACX100_IOCTL_DEBUG		- ACX100_IOCTL] = acx_ioctl_set_debug,
-+#endif
-+[ACX100_IOCTL_SET_PLED		- ACX100_IOCTL] = acx100_ioctl_set_led_power,
-+[ACX100_IOCTL_GET_PLED		- ACX100_IOCTL] = acx100_ioctl_get_led_power,
-+[ACX100_IOCTL_SET_RATES		- ACX100_IOCTL] = acx_ioctl_set_rates,
-+[ACX100_IOCTL_LIST_DOM		- ACX100_IOCTL] = acx_ioctl_list_reg_domain,
-+[ACX100_IOCTL_SET_DOM		- ACX100_IOCTL] = acx_ioctl_set_reg_domain,
-+[ACX100_IOCTL_GET_DOM		- ACX100_IOCTL] = acx_ioctl_get_reg_domain,
-+[ACX100_IOCTL_SET_SCAN_PARAMS	- ACX100_IOCTL] = acx_ioctl_set_scan_params,
-+[ACX100_IOCTL_GET_SCAN_PARAMS	- ACX100_IOCTL] = acx_ioctl_get_scan_params,
-+[ACX100_IOCTL_SET_PREAMB	- ACX100_IOCTL] = acx_ioctl_set_short_preamble,
-+[ACX100_IOCTL_GET_PREAMB	- ACX100_IOCTL] = acx_ioctl_get_short_preamble,
-+[ACX100_IOCTL_SET_ANT		- ACX100_IOCTL] = acx_ioctl_set_antenna,
-+[ACX100_IOCTL_GET_ANT		- ACX100_IOCTL] = acx_ioctl_get_antenna,
-+[ACX100_IOCTL_RX_ANT		- ACX100_IOCTL] = acx_ioctl_set_rx_antenna,
-+[ACX100_IOCTL_TX_ANT		- ACX100_IOCTL] = acx_ioctl_set_tx_antenna,
-+[ACX100_IOCTL_SET_PHY_AMP_BIAS	- ACX100_IOCTL] = acx100_ioctl_set_phy_amp_bias,
-+[ACX100_IOCTL_GET_PHY_CHAN_BUSY	- ACX100_IOCTL] = acx_ioctl_get_phy_chan_busy_percentage,
-+[ACX100_IOCTL_SET_ED		- ACX100_IOCTL] = acx_ioctl_set_ed_threshold,
-+[ACX100_IOCTL_SET_CCA		- ACX100_IOCTL] = acx_ioctl_set_cca,
-+[ACX100_IOCTL_MONITOR		- ACX100_IOCTL] = acx_ioctl_wlansniff,
-+[ACX100_IOCTL_TEST		- ACX100_IOCTL] = acx_ioctl_unknown11,
-+[ACX100_IOCTL_DBG_SET_MASKS	- ACX100_IOCTL] = acx_ioctl_dbg_set_masks,
-+[ACX111_IOCTL_INFO		- ACX100_IOCTL] = acx111_ioctl_info,
-+};
-+
-+
-+static const struct iw_priv_args acx_ioctl_private_args[] = {
-+#if ACX_DEBUG
-+{ cmd : ACX100_IOCTL_DEBUG,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetDebug" },
-+#endif
-+{ cmd : ACX100_IOCTL_SET_PLED,
-+	set_args : IW_PRIV_TYPE_BYTE | 2,
-+	get_args : 0,
-+	name : "SetLEDPower" },
-+{ cmd : ACX100_IOCTL_GET_PLED,
-+	set_args : 0,
-+	get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2,
-+	name : "GetLEDPower" },
-+{ cmd : ACX100_IOCTL_SET_RATES,
-+	set_args : IW_PRIV_TYPE_CHAR | 256,
-+	get_args : 0,
-+	name : "SetRates" },
-+{ cmd : ACX100_IOCTL_LIST_DOM,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "ListRegDomain" },
-+{ cmd : ACX100_IOCTL_SET_DOM,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetRegDomain" },
-+{ cmd : ACX100_IOCTL_GET_DOM,
-+	set_args : 0,
-+	get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	name : "GetRegDomain" },
-+{ cmd : ACX100_IOCTL_SET_SCAN_PARAMS,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4,
-+	get_args : 0,
-+	name : "SetScanParams" },
-+{ cmd : ACX100_IOCTL_GET_SCAN_PARAMS,
-+	set_args : 0,
-+	get_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4,
-+	name : "GetScanParams" },
-+{ cmd : ACX100_IOCTL_SET_PREAMB,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetSPreamble" },
-+{ cmd : ACX100_IOCTL_GET_PREAMB,
-+	set_args : 0,
-+	get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	name : "GetSPreamble" },
-+{ cmd : ACX100_IOCTL_SET_ANT,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetAntenna" },
-+{ cmd : ACX100_IOCTL_GET_ANT,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "GetAntenna" },
-+{ cmd : ACX100_IOCTL_RX_ANT,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetRxAnt" },
-+{ cmd : ACX100_IOCTL_TX_ANT,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetTxAnt" },
-+{ cmd : ACX100_IOCTL_SET_PHY_AMP_BIAS,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetPhyAmpBias"},
-+{ cmd : ACX100_IOCTL_GET_PHY_CHAN_BUSY,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "GetPhyChanBusy" },
-+{ cmd : ACX100_IOCTL_SET_ED,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetED" },
-+{ cmd : ACX100_IOCTL_SET_CCA,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetCCA" },
-+{ cmd : ACX100_IOCTL_MONITOR,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2,
-+	get_args : 0,
-+	name : "monitor" },
-+{ cmd : ACX100_IOCTL_TEST,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "Test" },
-+{ cmd : ACX100_IOCTL_DBG_SET_MASKS,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2,
-+	get_args : 0,
-+	name : "DbgSetMasks" },
-+{ cmd : ACX111_IOCTL_INFO,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "GetAcx111Info" },
-+{ cmd : ACX100_IOCTL_DBG_SET_IO,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4,
-+	get_args : 0,
-+	name : "DbgSetIO" },
-+{ cmd : ACX100_IOCTL_DBG_GET_IO,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3,
-+	get_args : 0,
-+	name : "DbgGetIO" },
-+};
-+
-+
-+const struct iw_handler_def acx_ioctl_handler_def =
-+{
-+	.num_standard = VEC_SIZE(acx_ioctl_handler),
-+	.num_private = VEC_SIZE(acx_ioctl_private_handler),
-+	.num_private_args = VEC_SIZE(acx_ioctl_private_args),
-+	.standard = (iw_handler *) acx_ioctl_handler,
-+	.private = (iw_handler *) acx_ioctl_private_handler,
-+	.private_args = (struct iw_priv_args *) acx_ioctl_private_args,
-+#if IW_HANDLER_VERSION > 5
-+	.get_wireless_stats = acx_e_get_wireless_stats
-+#endif /* IW > 5 */
-+};
-Index: linux-2.6.23/drivers/net/wireless/acx/Kconfig
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/Kconfig	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,113 @@
-+config ACX
-+	tristate "TI acx100/acx111 802.11b/g wireless chipsets"
-+	depends on NET_RADIO && EXPERIMENTAL
-+	select FW_LOADER
-+	---help---
-+	A driver for 802.11b/g wireless cards based on
-+	Texas Instruments acx100 and acx111 chipsets.
-+
-+	This driver supports Host AP mode that allows
-+	your computer to act as an IEEE 802.11 access point.
-+	This driver is new and experimental.
-+
-+	Texas Instruments did not take part in development of this driver
-+	in any way, shape or form.
-+
-+	The driver can be compiled as a module and will be named "acx".
-+
-+config ACX_PCI
-+	bool "TI acx100/acx111 802.11b/g PCI"
-+	depends on ACX && PCI
-+	---help---
-+	Include PCI and CardBus support in acx.
-+
-+	acx chipsets need their firmware loaded at startup.
-+	You will need to provide a firmware image via hotplug.
-+
-+	Firmware may be in a form of single image 40-100kb in size
-+	(a 'combined' firmware) or two images - main image
-+	(again 40-100kb) and radio image (~10kb or less).
-+
-+	Firmware images are requested from hotplug using following names:
-+
-+	tiacx100 - main firmware image for acx100 chipset
-+	tiacx100rNN - radio acx100 firmware for radio type NN
-+	tiacx100cNN - combined acx100 firmware for radio type NN
-+	tiacx111 - main acx111 firmware
-+	tiacx111rNN - radio acx111 firmware for radio type NN
-+	tiacx111cNN - combined acx111 firmware for radio type NN
-+
-+	Driver will attempt to load combined image first.
-+	If no such image is found, it will try to load main image
-+	and radio image instead.
-+
-+	Firmware files are not covered by GPL and are not distributed
-+	with this driver for legal reasons.
-+
-+config ACX_USB
-+	bool "TI acx100/acx111 802.11b/g USB"
-+	depends on ACX && (USB=y || USB=ACX)
-+	---help---
-+	Include USB support in acx.
-+
-+	There is only one currently known device in this category,
-+	D-Link DWL-120+, but newer devices seem to be on the horizon.
-+
-+	acx chipsets need their firmware loaded at startup.
-+	You will need to provide a firmware image via hotplug.
-+
-+	Firmware for USB device is requested from hotplug
-+	by the 'tiacx100usb' name.
-+
-+	Firmware files are not covered by GPL and are not distributed
-+	with this driver for legal reasons.
-+
-+config ACX_MEM
-+	bool "TI acx100/acx111 802.11b/g memory mapped slave 16 interface"
-+	depends on ACX
-+	---help---
-+	acx chipsets need their firmware loaded at startup.
-+	You will need to provide a firmware image via hotplug.
-+
-+	Firmware for USB device is requested from hotplug
-+	by the 'tiacx100usb' name.
-+
-+	Firmware files are not covered by GPL and are not distributed
-+	with this driver for legal reasons.
-+
-+config ACX_CS
-+	bool "TI acx100/acx111 802.11b/g cardbus interface"
-+	depends on ACX
-+	---help---
-+	acx chipsets need their firmware loaded at startup.
-+	You will need to provide a firmware image via hotplug.
-+	
-+	This driver is based on memory mapped driver.
-+
-+	Firmware files are not covered by GPL and are not distributed
-+	with this driver for legal reasons.
-+
-+config ACX_HX4700
-+	tristate "ACX support for the iPAQ hx4700 using ACX_MEM"
-+	depends on HX4700_CORE && ACX_MEM
-+	---help---
-+	Include memory interface support in acx for the iPAQ hx4700.
-+
-+config ACX_HTCUNIVERSAL
-+	tristate "ACX support for the HTC Universal using ACX_MEM"
-+	depends on HTCUNIVERSAL_CORE && HTC_ASIC3 && ACX_MEM
-+	---help---
-+	Include memory interface support in acx for the HTC Universal.
-+
-+config ACX_HTCSABLE
-+	tristate "ACX support for the HTC Sable (IPAQ hw6915) using ACX_MEM"
-+	depends on MACH_HW6900 && HTC_ASIC3 && ACX_MEM
-+	---help---
-+	Include memory interface support in acx for the HTC Sable (IPAQ hw6915).
-+
-+config ACX_RX3000
-+	tristate "ACX support for the iPAQ RX3000 using ACX_MEM"
-+	depends on MACH_RX3715 && ACX_MEM && LEDS_ASIC3
-+	---help---
-+	Include memory interface support in acx for the IPAQ RX3000.
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/Makefile
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/Makefile	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,21 @@
-+#obj-m += acx.o
-+
-+#acx-obj-y += pci.o
-+#acx-obj-y += usb.o
-+
-+#acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y)
-+
-+# Use this if you have proper Kconfig integration:
-+
-+obj-$(CONFIG_ACX) += acx.o
-+obj-$(CONFIG_ACX_HX4700) += hx4700_acx.o
-+obj-$(CONFIG_ACX_HTCUNIVERSAL) += htcuniversal_acx.o
-+obj-$(CONFIG_ACX_HTCSABLE) += htcsable_acx.o
-+obj-$(CONFIG_ACX_RX3000) += rx3000_acx.o
-+#
-+acx-obj-$(CONFIG_ACX_PCI) += pci.o
-+acx-obj-$(CONFIG_ACX_USB) += usb.o
-+acx-obj-$(CONFIG_ACX_MEM) += mem.o
-+acx-obj-$(CONFIG_ACX_CS) += cs.o
-+#
-+acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y)
-Index: linux-2.6.23/drivers/net/wireless/acx/mem.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/mem.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,5363 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+**
-+** Slave memory interface support:
-+**
-+** Todd Blumer - SDG Systems
-+** Bill Reese - HP
-+** Eric McCorkle - Shadowsun
-+*/
-+#define ACX_MEM 1
-+
-+/*
-+ * non-zero makes it dump the ACX memory to the console then
-+ * panic when you cat /proc/driver/acx_wlan0_diag
-+ */
-+#define DUMP_MEM_DEFINED 1
-+
-+#define DUMP_MEM_DURING_DIAG 0
-+#define DUMP_IF_SLOW 0
-+
-+#define PATCH_AROUND_BAD_SPOTS 1
-+#define HX4700_FIRMWARE_CHECKSUM 0x0036862e
-+#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+
-+/* Linux 2.6.18+ uses <linux/utsrelease.h> */
-+#ifndef UTS_RELEASE
-+#include <linux/utsrelease.h>
-+#endif
-+
-+#include <linux/compiler.h> /* required for Lx 2.6.8 ?? */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/skbuff.h>
-+#include <linux/slab.h>
-+#include <linux/if_arp.h>
-+#include <linux/irq.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+#include <linux/netdevice.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm.h>
-+#include <linux/vmalloc.h>
-+#include <linux/delay.h>
-+#include <linux/workqueue.h>
-+#include <linux/inetdevice.h>
-+
-+#include "acx.h"
-+#include "acx_hw.h"
-+
-+/***********************************************************************
-+*/
-+
-+#define CARD_EEPROM_ID_SIZE 6
-+
-+#include <asm/io.h>
-+
-+#define REG_ACX_VENDOR_ID 0x900
-+/*
-+ * This is the vendor id on the HX4700, anyway
-+ */
-+#define ACX_VENDOR_ID 0x8400104c
-+
-+typedef enum {
-+	ACX_SOFT_RESET = 0,
-+
-+	ACX_SLV_REG_ADDR,
-+	ACX_SLV_REG_DATA,
-+	ACX_SLV_REG_ADATA,
-+
-+	ACX_SLV_MEM_CP,
-+	ACX_SLV_MEM_ADDR,
-+	ACX_SLV_MEM_DATA,
-+	ACX_SLV_MEM_CTL,
-+} acxreg_t;
-+
-+/***********************************************************************
-+*/
-+static void acxmem_i_tx_timeout(struct net_device *ndev);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id);
-+#else
-+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+#endif
-+static void acxmem_i_set_multicast_list(struct net_device *ndev);
-+
-+static int acxmem_e_open(struct net_device *ndev);
-+static int acxmem_e_close(struct net_device *ndev);
-+static void acxmem_s_up(struct net_device *ndev);
-+static void acxmem_s_down(struct net_device *ndev);
-+
-+static void dump_acxmem (acx_device_t *adev, u32 start, int length);
-+static int acxmem_complete_hw_reset (acx_device_t *adev);
-+static void acxmem_s_delete_dma_regions(acx_device_t *adev);
-+
-+static struct platform_device *resume_pdev;
-+
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxmem_e_suspend(struct platform_device *pdev, pm_message_t state);
-+#else
-+acxmem_e_suspend(struct device *pdev, u32 state);
-+#endif
-+static void
-+fw_resumer(struct work_struct *notused);
-+//fw_resumer( void *data );
-+
-+static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
-+{
-+  struct net_device *ndev = ptr;
-+  acx_device_t *adev = ndev2adev(ndev);
-+
-+  /*
-+   * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes.
-+   */
-+
-+  if (NETDEV_CHANGEADDR == event) {
-+    /*
-+     * the upper layers put the new MAC address in ndev->dev_addr; we just copy
-+     * it over and update the ACX with it.
-+     */
-+    MAC_COPY(adev->dev_addr, adev->ndev->dev_addr);
-+    adev->set_mask |= GETSET_STATION_ID;
-+    acx_s_update_card_settings (adev);
-+  }
-+
-+  return 0;
-+}
-+
-+static struct notifier_block acx_netdev_notifier = {
-+        .notifier_call = acx_netdev_event,
-+};
-+
-+/***********************************************************************
-+** Register access
-+*/
-+
-+/* Pick one */
-+/* #define INLINE_IO static */
-+#define INLINE_IO static inline
-+
-+INLINE_IO u32
-+read_id_register (acx_device_t *adev)
-+{
-+  writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]);
-+  return readl (&adev->iobase[ACX_SLV_REG_DATA]);
-+}
-+
-+INLINE_IO u32
-+read_reg32(acx_device_t *adev, unsigned int offset)
-+{
-+        u32 val;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	  return readl(((u8*)adev->iobase) + addr);
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	val = readl( &adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return val;
-+}
-+
-+INLINE_IO u16
-+read_reg16(acx_device_t *adev, unsigned int offset)
-+{
-+	u16 lo;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    return readw(((u8 *) adev->iobase) + addr);
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return lo;
-+}
-+
-+INLINE_IO u8
-+read_reg8(acx_device_t *adev, unsigned int offset)
-+{
-+	u8 lo;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20)
-+	    return readb(((u8 *)adev->iobase) + addr);
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return (u8)lo;
-+}
-+
-+INLINE_IO void
-+write_reg32(acx_device_t *adev, unsigned int offset, u32 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writel(val, ((u8*)adev->iobase) + addr);
-+	    return;
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writel( val, &adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+INLINE_IO void
-+write_reg16(acx_device_t *adev, unsigned int offset, u16 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writew(val, ((u8 *)adev->iobase) + addr);
-+	    return;
-+	}
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+INLINE_IO void
-+write_reg8(acx_device_t *adev, unsigned int offset, u8 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writeb(val, ((u8 *) adev->iobase) + addr);
-+	    return;
-+	}
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+/* Handle PCI posting properly:
-+ * Make sure that writes reach the adapter in case they require to be executed
-+ * *before* the next write, by reading a random (and safely accessible) register.
-+ * This call has to be made if there is no read following (which would flush the data
-+ * to the adapter), yet the written data has to reach the adapter immediately. */
-+INLINE_IO void
-+write_flush(acx_device_t *adev)
-+{
-+	/* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */
-+	/* faster version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should also be safe): */
-+	(void) readl(adev->iobase);
-+}
-+
-+INLINE_IO void
-+set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) {
-+  u32 tmp;
-+
-+  tmp = read_reg32 (adev, offset);
-+  tmp = tmp | bits;
-+  write_reg32 (adev, offset, tmp);
-+  write_flush (adev);
-+}
-+
-+INLINE_IO void
-+clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) {
-+  u32 tmp;
-+
-+  tmp = read_reg32 (adev, offset);
-+  tmp = tmp & ~bits;
-+  write_reg32 (adev, offset, tmp);
-+  write_flush (adev);
-+}
-+
-+/*
-+ * Copy from PXA memory to the ACX memory.  This assumes both the PXA and ACX
-+ * addresses are 32 bit aligned.  Count is in bytes.
-+ */
-+INLINE_IO void
-+write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val)
-+{
-+  write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address);
-+  udelay (10);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val);
-+}
-+
-+INLINE_IO u32
-+read_slavemem32 (acx_device_t *adev, u32 slave_address)
-+{
-+  u32 val;
-+
-+  write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address);
-+  udelay (10);
-+  val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+
-+  return val;
-+}
-+
-+INLINE_IO void
-+write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val)
-+{
-+  u32 data;
-+  u32 base;
-+  int offset;
-+
-+  /*
-+   * Get the word containing the target address and the byte offset in that word.
-+   */
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+  data &= ~(0xff << offset);
-+  data |= val << offset;
-+  write_slavemem32 (adev, base, data);
-+}
-+
-+INLINE_IO u8
-+read_slavemem8 (acx_device_t *adev, u32 slave_address)
-+{
-+  u8 val;
-+  u32 base;
-+  u32 data;
-+  int offset;
-+
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+ 
-+  val = (data >> offset) & 0xff;
-+
-+  return val;
-+}
-+
-+/*
-+ * doesn't split across word boundaries
-+ */
-+INLINE_IO void
-+write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val)
-+{
-+  u32 data;
-+  u32 base;
-+  int offset;
-+
-+  /*
-+   * Get the word containing the target address and the byte offset in that word.
-+   */
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+  data &= ~(0xffff << offset);
-+  data |= val << offset;
-+  write_slavemem32 (adev, base, data);
-+}
-+
-+/*
-+ * doesn't split across word boundaries
-+ */
-+INLINE_IO u16
-+read_slavemem16 (acx_device_t *adev, u32 slave_address)
-+{
-+  u16 val;
-+  u32 base;
-+  u32 data;
-+  int offset;
-+
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+ 
-+  val = (data >> offset) & 0xffff;
-+
-+  return val;
-+}
-+
-+/*
-+ * Copy from slave memory
-+ *
-+ * TODO - rewrite using address autoincrement, handle partial words
-+ */
-+void
-+copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) {
-+  u32 tmp = 0;
-+  u8 *ptmp = (u8 *) &tmp;
-+
-+  /*
-+   * Right now I'm making the assumption that the destination is aligned, but
-+   * I'd better check.
-+   */
-+  if ((u32) destination & 3) {
-+    printk ("acx copy_from_slavemem: warning!  destination not word-aligned!\n");
-+  }
-+
-+  while (count >= 4) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source);
-+    udelay (10);
-+    *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    count -= 4;
-+    source += 4;
-+    destination += 4;
-+  }
-+
-+  /*
-+   * If the word reads above didn't satisfy the count, read one more word
-+   * and transfer a byte at a time until the request is satisfied.
-+   */
-+  if (count) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source);
-+    udelay (10);
-+    tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    while (count--) {
-+      *destination++ = *ptmp++;
-+    }
-+  }
-+}
-+
-+/*
-+ * Copy to slave memory
-+ *
-+ * TODO - rewrite using autoincrement, handle partial words
-+ */
-+void
-+copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count)
-+{
-+  u32 tmp = 0;
-+  u8* ptmp = (u8 *) &tmp;
-+  static u8 src[512];	/* make static to avoid huge stack objects */
-+
-+  /*
-+   * For now, make sure the source is word-aligned by copying it to a word-aligned
-+   * buffer.  Someday rewrite to avoid the extra copy.
-+   */
-+  if (count > sizeof (src)) {
-+    printk ("acx copy_to_slavemem: Warning! buffer overflow!\n");
-+    count = sizeof (src);
-+  }
-+  memcpy (src, source, count);
-+  source = src;
-+
-+  while (count >= 4) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source));
-+    count -= 4;
-+    source += 4;
-+    destination += 4;
-+  }
-+
-+  /*
-+   * If there are leftovers read the next word from the acx and merge in
-+   * what they want to write.
-+   */
-+  if (count) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    while (count--) {
-+      *ptmp++ = *source++;
-+    }
-+    /*
-+     * reset address in case we're currently in auto-increment mode
-+     */
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp);
-+    udelay (10);
-+  }
-+  
-+}
-+
-+/*
-+ * Block copy to slave buffers using memory block chain mode.  Copies to the ACX
-+ * transmit buffer structure with minimal intervention on our part.
-+ * Interrupts should be disabled when calling this.
-+ */
-+void
-+chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count)
-+{
-+  u32 val;
-+  u32 *data = (u32 *) source;
-+  static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS];
-+
-+  /*
-+   * Warn if the pointers don't look right.  Destination must fit in [23:5] with
-+   * zero elsewhere and source should be 32 bit aligned.
-+   * This should never happen since we're in control of both, but I want to know about
-+   * it if it does.
-+   */
-+  if ((destination & 0x00ffffe0) != destination) {
-+    printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination);
-+  }
-+  if (count > sizeof aligned_source) {
-+      printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" );
-+      count = sizeof aligned_source;
-+  }
-+  if ((u32) source & 3) {
-+    memcpy (aligned_source, source, count);
-+    data = (u32 *) aligned_source;
-+  }
-+
-+  /*
-+   * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment
-+   * SLV_MEM_CTL[5:2] = offset to data portion = 1 word
-+   */
-+  val = 2 << 16 | 1 << 2;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CTL]);
-+
-+  /*
-+   * SLV_MEM_CP[23:5] = start of 1st block
-+   * SLV_MEM_CP[3:2] = offset to memblkptr = 0
-+   */
-+  val = destination & 0x00ffffe0;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CP]);
-+
-+  /*
-+   * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5]
-+   */
-+  val = (destination & 0x00ffffe0) + (1<<2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]);
-+
-+  /*
-+   * Write the data to the slave data register, rounding up to the end
-+   * of the word containing the last byte (hence the > 0)
-+   */
-+  while (count > 0) {
-+    writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]);
-+    count -= 4;
-+  }
-+}
-+
-+
-+/*
-+ * Block copy from slave buffers using memory block chain mode.  Copies from the ACX
-+ * receive buffer structures with minimal intervention on our part.
-+ * Interrupts should be disabled when calling this.
-+ */
-+void
-+chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count)
-+{
-+  u32 val;
-+  u32 *data = (u32 *) destination;
-+  static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS];
-+  int saved_count = count;
-+
-+  /*
-+   * Warn if the pointers don't look right.  Destination must fit in [23:5] with
-+   * zero elsewhere and source should be 32 bit aligned.
-+   * Turns out the network stack sends unaligned things, so fix them before
-+   * copying to the ACX.
-+   */
-+  if ((source & 0x00ffffe0) != source) {
-+    printk ("acx chaincopy: source block 0x%04x not aligned!\n", source);
-+    dump_acxmem (adev, 0, 0x10000);
-+  }
-+  if ((u32) destination & 3) {
-+    //printk ("acx chaincopy: data destination not word aligned!\n");
-+    data = (u32 *) aligned_destination;
-+    if (count > sizeof aligned_destination) {
-+	printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" );
-+	count = sizeof aligned_destination;
-+    }
-+  }
-+
-+  /*
-+   * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment
-+   * SLV_MEM_CTL[5:2] = offset to data portion = 1 word
-+   */
-+  val = (2 << 16) | (1 << 2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CTL]);
-+
-+  /*
-+   * SLV_MEM_CP[23:5] = start of 1st block
-+   * SLV_MEM_CP[3:2] = offset to memblkptr = 0
-+   */
-+  val = source & 0x00ffffe0;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CP]);
-+
-+  /*
-+   * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5]
-+   */
-+  val = (source & 0x00ffffe0) + (1<<2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]);
-+
-+  /*
-+   * Read the data from the slave data register, rounding up to the end
-+   * of the word containing the last byte (hence the > 0)
-+   */
-+  while (count > 0) {
-+    *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]);
-+    count -= 4;
-+  }
-+
-+  /*
-+   * If the destination wasn't aligned, we would have saved it in
-+   * the aligned buffer, so copy it where it should go.
-+   */
-+  if ((u32) destination & 3) {
-+    memcpy (destination, aligned_destination, saved_count);
-+  }
-+}
-+
-+char
-+printable (char c) 
-+{
-+  return ((c >= 20) && (c < 127)) ? c : '.';
-+}
-+
-+#if DUMP_MEM_DEFINED > 0
-+static void
-+dump_acxmem (acx_device_t *adev, u32 start, int length)
-+{
-+  int i;
-+  u8 buf[16];
-+
-+  while (length > 0) {
-+    printk ("%04x ", start);
-+    copy_from_slavemem (adev, buf, start, 16);
-+    for (i = 0; (i < 16) && (i < length); i++) {
-+      printk ("%02x ", buf[i]);
-+    }
-+    for (i = 0; (i < 16) && (i < length); i++) {
-+      printk ("%c", printable (buf[i]));
-+    }
-+    printk ("\n");
-+    start += 16;
-+    length -= 16;
-+  }
-+}
-+#endif
-+
-+static void
-+enable_acx_irq(acx_device_t *adev);
-+static void
-+disable_acx_irq(acx_device_t *adev);
-+
-+/*
-+ * Return an acx pointer to the next transmit data block.
-+ */
-+u32
-+allocate_acx_txbuf_space (acx_device_t *adev, int count) {
-+  u32 block, next, last_block;
-+  int blocks_needed;
-+  unsigned long flags;
-+
-+  spin_lock_irqsave(&adev->txbuf_lock, flags);
-+  /*
-+   * Take 4 off the memory block size to account for the reserved word at the start of
-+   * the block.
-+   */
-+  blocks_needed = count / (adev->memblocksize - 4);
-+  if (count % (adev->memblocksize - 4))
-+    blocks_needed++;
-+
-+  if (blocks_needed <= adev->acx_txbuf_blocks_free) {
-+    /*
-+     * Take blocks at the head of the free list.
-+     */
-+    last_block = block = adev->acx_txbuf_free;
-+
-+    /*
-+     * Follow block pointers through the requested number of blocks both to
-+     * find the new head of the free list and to set the flags for the blocks
-+     * appropriately.
-+     */
-+    while (blocks_needed--) {
-+      /*
-+       * Keep track of the last block of the allocation
-+       */
-+      last_block = adev->acx_txbuf_free;
-+
-+      /*
-+       * Make sure the end control flag is not set.
-+       */
-+      next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff;
-+      write_slavemem32 (adev, adev->acx_txbuf_free, next);
-+
-+      /*
-+       * Update the new head of the free list
-+       */
-+      adev->acx_txbuf_free = next << 5;
-+      adev->acx_txbuf_blocks_free--;
-+
-+    }
-+
-+    /*
-+     * Flag the last block both by clearing out the next pointer
-+     * and marking the control field.
-+     */
-+    write_slavemem32 (adev, last_block, 0x02000000);
-+
-+    /*
-+     * If we're out of buffers make sure the free list pointer is NULL
-+     */
-+    if (!adev->acx_txbuf_blocks_free) {
-+      adev->acx_txbuf_free = 0;
-+    }
-+  }
-+  else {
-+    block = 0;
-+  }
-+  spin_unlock_irqrestore (&adev->txbuf_lock, flags);
-+  return block;
-+}
-+
-+/*
-+ * Return buffer space back to the pool by following the next pointers until we find
-+ * the block marked as the end.  Point the last block to the head of the free list,
-+ * then update the head of the free list to point to the newly freed memory.
-+ * This routine gets called in interrupt context, so it shouldn't block to protect
-+ * the integrity of the linked list.  The ISR already holds the lock.
-+ */
-+void
-+reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) {
-+  u32 cur, last, next;
-+  unsigned long flags;
-+
-+  spin_lock_irqsave (&adev->txbuf_lock, flags);
-+  if ((blockptr >= adev->acx_txbuf_start) &&
-+      (blockptr <= adev->acx_txbuf_start +
-+       (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) {
-+    cur = blockptr;
-+    do {
-+      last = cur;
-+      next = read_slavemem32 (adev, cur);
-+      
-+      /*
-+       * Advance to the next block in this allocation
-+       */
-+      cur = (next & 0x7ffff) << 5;
-+      
-+      /*
-+       * This block now counts as free.
-+       */
-+      adev->acx_txbuf_blocks_free++;
-+    } while (!(next & 0x02000000));
-+    
-+    /*
-+     * last now points to the last block of that allocation.  Update the pointer
-+     * in that block to point to the free list and reset the free list to the
-+     * first block of the free call.  If there were no free blocks, make sure
-+     * the new end of the list marks itself as truly the end.
-+     */
-+    if (adev->acx_txbuf_free) {
-+      write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5);
-+    }
-+    else {
-+      write_slavemem32 (adev, last, 0x02000000);
-+    }
-+    adev->acx_txbuf_free = blockptr;
-+  } 
-+  spin_unlock_irqrestore(&adev->txbuf_lock, flags);
-+}
-+
-+/*
-+ * Initialize the pieces managing the transmit buffer pool on the ACX.  The transmit
-+ * buffer is a circular queue with one 32 bit word reserved at the beginning of each
-+ * block.  The upper 13 bits are a control field, of which only 0x02000000 has any
-+ * meaning.  The lower 19 bits are the address of the next block divided by 32.
-+ */
-+void
-+init_acx_txbuf (acx_device_t *adev) {
-+  
-+  /*
-+   * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us.
-+   * All we need to do is reset the rest of the bookeeping.
-+   */
-+  
-+  adev->acx_txbuf_free = adev->acx_txbuf_start;
-+  adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks;
-+  
-+  /*
-+   * Initialization leaves the last transmit pool block without a pointer back to
-+   * the head of the list, but marked as the end of the list.  That's how we want
-+   * to see it, too, so leave it alone.  This is only ever called after a firmware
-+   * reset, so the ACX memory is in the state we want.
-+   */
-+	
-+}
-+
-+INLINE_IO int
-+adev_present(acx_device_t *adev)
-+{
-+	/* fast version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should be safe): */
-+	return readl(adev->iobase) != 0xffffffff;
-+}
-+
-+/***********************************************************************
-+*/
-+static inline txdesc_t*
-+get_txdesc(acx_device_t *adev, int index)
-+{
-+	return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size);
-+}
-+
-+static inline txdesc_t*
-+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc)
-+{
-+	return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size);
-+}
-+
-+static txhostdesc_t*
-+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return &adev->txhostdesc_start[index*2];
-+}
-+
-+static inline client_t*
-+get_txc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return adev->txc[index];
-+}
-+
-+static inline u16
-+get_txr(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	index /= adev->txdesc_size;
-+	return adev->txr[index];
-+}
-+
-+static inline void
-+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	adev->txc[index] = c;
-+	adev->txr[index] = r111;
-+}
-+
-+
-+/***********************************************************************
-+** EEPROM and PHY read/write helpers
-+*/
-+/***********************************************************************
-+** acxmem_read_eeprom_byte
-+**
-+** Function called to read an octet in the EEPROM.
-+**
-+** This function is used by acxmem_e_probe to check if the
-+** connected card is a legal one or not.
-+**
-+** Arguments:
-+**	adev		ptr to acx_device structure
-+**	addr		address to read in the EEPROM
-+**	charbuf		ptr to a char. This is where the read octet
-+**			will be stored
-+*/
-+int
-+acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf)
-+{
-+	int result;
-+	int count;
-+
-+	write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+	write_reg32(adev, IO_ACX_EEPROM_ADDR, addr);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for EEPROM read\n",
-+							adev->ndev->name);
-+			result = NOT_OK;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	*charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA);
-+	log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf);
-+	result = OK;
-+
-+fail:
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** We don't lock hw accesses here since we never r/w eeprom in IRQ
-+** Note: this function sleeps only because of GFP_KERNEL alloc
-+*/
-+#ifdef UNUSED
-+int
-+acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf)
-+{
-+	u8 *data_verify = NULL;
-+	unsigned long flags;
-+	int count, i;
-+	int result = NOT_OK;
-+	u16 gpio_orig;
-+
-+	printk("acx: WARNING! I would write to EEPROM now. "
-+		"Since I really DON'T want to unless you know "
-+		"what you're doing (THIS CODE WILL PROBABLY "
-+		"NOT WORK YET!), I will abort that now. And "
-+		"definitely make sure to make a "
-+		"/proc/driver/acx_wlan0_eeprom backup copy first!!! "
-+		"(the EEPROM content includes the PCI config header!! "
-+		"If you kill important stuff, then you WILL "
-+		"get in trouble and people DID get in trouble already)\n");
-+	return OK;
-+
-+	FN_ENTER;
-+
-+	data_verify = kmalloc(len, GFP_KERNEL);
-+	if (!data_verify) {
-+		goto end;
-+	}
-+
-+	/* first we need to enable the OE (EEPROM Output Enable) GPIO line
-+	 * to be able to write to the EEPROM.
-+	 * NOTE: an EEPROM writing success has been reported,
-+	 * but you probably have to modify GPIO_OUT, too,
-+	 * and you probably need to activate a different GPIO
-+	 * line instead! */
-+	gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE);
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1);
-+	write_flush(adev);
-+
-+	/* ok, now start writing the data out */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i));
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 1);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("WARNING, DANGER!!! "
-+					"Timeout waiting for EEPROM write\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+	}
-+
-+	/* disable EEPROM writing */
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig);
-+	write_flush(adev);
-+
-+	/* now start a verification run */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("timeout waiting for EEPROM read\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+
-+		data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA);
-+	}
-+
-+	if (0 == memcmp(charbuf, data_verify, len))
-+		result = OK; /* read data matches, success */
-+
-+end:
-+	kfree(data_verify);
-+	FN_EXIT1(result);
-+	return result;
-+}
-+#endif /* UNUSED */
-+
-+
-+/***********************************************************************
-+** acxmem_s_read_phy_reg
-+**
-+** Messing with rx/tx disabling and enabling here
-+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic
-+*/
-+int
-+acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	int result = NOT_OK;
-+	int count;
-+
-+	FN_ENTER;
-+
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			*charbuf = 0;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "count was %u\n", count);
-+	*charbuf = read_reg8(adev, IO_ACX_PHY_DATA);
-+
-+	log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg);
-+	result = OK;
-+	goto fail; /* silence compiler warning */
-+fail:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+        int count;
-+	FN_ENTER;
-+
-+	/* mprusko said that 32bit accesses result in distorted sensitivity
-+	 * on his card. Unconfirmed, looks like it's not true (most likely since we
-+	 * now properly flush writes). */
-+	write_reg32(adev, IO_ACX_PHY_DATA, value);
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 1);
-+	write_flush(adev);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg);
-+ fail:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+#define NO_AUTO_INCREMENT	1
-+
-+/***********************************************************************
-+** acxmem_s_write_fw
-+**
-+** Write the firmware image into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	1	firmware image corrupted
-+**	0	success
-+*/
-+static int
-+acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset)
-+{
-+	int len, size, checkMismatch = -1;
-+	u32 sum, v32, tmp, id;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+	write_flush(adev);
-+#endif
-+#endif
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		sum += p[0]+p[1]+p[2]+p[3];
-+		p += 4;
-+		len += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT 
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+		write_flush(adev);
-+#endif
-+		write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32);
-+		write_flush(adev);
-+#endif
-+		write_slavemem32 (adev, offset + len - 4, v32);
-+
-+		id = read_id_register (adev);
-+		
-+		/*
-+		 * check the data written
-+		 */
-+		tmp = read_slavemem32 (adev, offset + len - 4);
-+		if (checkMismatch && (tmp != v32)) {
-+		  printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n",
-+			  offset + len - 4, v32, tmp, id);
-+		  checkMismatch = 0;
-+		}
-+	}
-+	log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n",
-+			size, sum, le32_to_cpu(fw_image->chksum));
-+
-+	/* compare our checksum with the stored image checksum */
-+	return (sum != le32_to_cpu(fw_image->chksum));
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_validate_fw
-+**
-+** Compare the firmware image given with
-+** the firmware image written into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	NOT_OK	firmware image corrupted or not correctly written
-+**	OK	success
-+*/
-+static int
-+acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image,
-+				u32 offset)
-+{
-+	u32 sum, v32, w32;
-+	int len, size;
-+	int result = OK;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+	write_reg32(adev, IO_ACX_SLV_END_CTL, 0);
-+
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+#endif
-+
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		p += 4;
-+		len += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+#endif
-+		udelay(10);
-+		w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA);
-+#endif
-+		w32 = read_slavemem32 (adev, offset + len - 4);
-+
-+		if (unlikely(w32 != v32)) {
-+			printk("acx: FATAL: firmware upload: "
-+			"data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n"
-+			"I/O timing issues or defective memory, with DWL-xx0+? "
-+			"ACX_IO_WIDTH=16 may help. Please report\n",
-+				len, v32, w32);
-+			result = NOT_OK;
-+			break;
-+		}
-+
-+		sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24);
-+	}
-+
-+	/* sum control verification */
-+	if (result != NOT_OK) {
-+		if (sum != le32_to_cpu(fw_image->chksum)) {
-+			printk("acx: FATAL: firmware upload: "
-+				"checksums don't match!\n");
-+			result = NOT_OK;
-+		}
-+	}
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_upload_fw
-+**
-+** Called from acx_reset_dev
-+*/
-+static int
-+acxmem_s_upload_fw(acx_device_t *adev)
-+{
-+	firmware_image_t *fw_image = NULL;
-+	int res = NOT_OK;
-+	int try;
-+	u32 file_size;
-+	char *filename = "WLANGEN.BIN";
-+#ifdef PATCH_AROUND_BAD_SPOTS
-+	u32 offset;
-+	int i;
-+        /*
-+         * arm-linux-objdump -d patch.bin, or
-+         * od -Ax -t x4 patch.bin after finding the bounds
-+         * of the .text section with arm-linux-objdump -s patch.bin
-+         */
-+        u32 patch[] = {
-+	  0xe584c030, 0xe59fc008,
-+	  0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c,
-+	  0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a,
-+	  0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24,
-+	  0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db,
-+	  0x60ca6003, 0xbdf0750a, 0xffff0808
-+	};
-+#endif
-+
-+	FN_ENTER;
-+	/* No combined image; tell common we need the radio firmware, too */
-+	adev->need_radio_fw = 1;
-+
-+	fw_image = acx_s_read_fw(adev->dev, filename, &file_size);
-+	if (!fw_image) {
-+	  FN_EXIT1(NOT_OK);
-+	  return NOT_OK;
-+	}
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxmem_s_write_fw(adev, fw_image, 0);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res);
-+		if (OK == res) {
-+			res = acxmem_s_validate_fw(adev, fw_image, 0);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw "
-+					"(main): %d\n", res);
-+		}
-+
-+		if (OK == res) {
-+			SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED);
-+			break;
-+		}
-+		printk("acx: firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+#ifdef PATCH_AROUND_BAD_SPOTS
-+	/*
-+	 * Only want to do this if the firmware is exactly what we expect for an
-+	 * iPaq 4700; otherwise, bad things would ensue.
-+	 */
-+	if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) ||
-+	    (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) {
-+	  /*
-+	   * Put the patch after the main firmware image.  0x950c contains
-+	   * the ACX's idea of the end of the firmware.  Use that location to
-+	   * load ours (which depends on that location being 0xab58) then
-+	   * update that location to point to after ours.
-+	   */
-+
-+	  offset = read_slavemem32 (adev, 0x950c);
-+	  
-+	  log (L_DEBUG, "acx: patching in at 0x%04x\n", offset);
-+
-+	  for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) {
-+	    write_slavemem32 (adev, offset, patch[i]);
-+	    offset += sizeof(u32);
-+	  }
-+
-+	  /*
-+	   * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58
-+	   */
-+	  write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4);
-+
-+	  /*
-+	   * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74
-+	   *
-+	   * 4a00 ldr r2, [pc, #0]
-+	   * 4710 bx  r2
-+	   * .data 0xab74+1
-+	   */
-+	  write_slavemem32 (adev, 0x1f40, 0x47104a00);
-+	  write_slavemem32 (adev, 0x1f44, 0x0000ab74+1);
-+
-+	  /*
-+	   * Bump the end of the firmware up to beyond our patch.
-+	   */
-+	  write_slavemem32 (adev, 0x950c, offset);
-+	
-+	}
-+#endif
-+
-+	vfree(fw_image);
-+
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_upload_radio
-+**
-+** Uploads the appropriate radio module firmware into the card.
-+*/
-+int
-+acxmem_s_upload_radio(acx_device_t *adev)
-+{
-+	acx_ie_memmap_t mm;
-+	firmware_image_t *radio_image;
-+	acx_cmd_radioinit_t radioinit;
-+	int res = NOT_OK;
-+	int try;
-+	u32 offset;
-+	u32 size;
-+	char filename[sizeof("RADIONN.BIN")];
-+
-+	if (!adev->need_radio_fw) return OK;
-+
-+	FN_ENTER;
-+
-+	acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+	offset = le32_to_cpu(mm.CodeEnd);
-+
-+	snprintf(filename, sizeof(filename), "RADIO%02x.BIN",
-+		adev->radio_type);
-+	radio_image = acx_s_read_fw(adev->dev, filename, &size);
-+	if (!radio_image) {
-+		printk("acx: can't load radio module '%s'\n", filename);
-+		goto fail;
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0);
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxmem_s_write_fw(adev, radio_image, offset);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res);
-+		if (OK == res) {
-+			res = acxmem_s_validate_fw(adev, radio_image, offset);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res);
-+		}
-+
-+		if (OK == res)
-+			break;
-+		printk("acx: radio firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+	radioinit.offset = cpu_to_le32(offset);
-+
-+	/* no endian conversion needed, remains in card CPU area: */
-+	radioinit.len = radio_image->size;
-+
-+	vfree(radio_image);
-+
-+	if (OK != res)
-+		goto fail;
-+
-+	/* will take a moment so let's have a big timeout */
-+	acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT,
-+		&radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000));
-+
-+	res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+
-+fail:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+/***********************************************************************
-+** acxmem_l_reset_mac
-+**
-+** MAC will be reset
-+** Call context: reset_dev
-+*/
-+static void
-+acxmem_l_reset_mac(acx_device_t *adev)
-+{
-+  int count;
-+	FN_ENTER;
-+
-+	/* halt eCPU */
-+	set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1);
-+
-+	/* now do soft reset of eCPU, set bit */
-+	set_regbits (adev, IO_ACX_SOFT_RESET, 0x1);
-+	log(L_DEBUG, "%s: enable soft reset...\n", __func__);
-+
-+	/* Windows driver sleeps here for a while with this sequence */
-+	for (count = 0; count < 200; count++) {
-+	  udelay (50);
-+	}
-+
-+	/* now clear bit again: deassert eCPU reset */
-+	log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__);
-+	clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1);
-+
-+	/* now start a burst read from initial EEPROM */
-+	set_regbits (adev, IO_ACX_EE_START, 0x1);
-+
-+	/*
-+	 * Windows driver sleeps here for a while with this sequence
-+	 */
-+	for (count = 0; count < 200; count++) {
-+	  udelay (50);
-+	}
-+
-+	/* Windows driver writes 0x10000 to register 0x808 here */
-+	
-+	write_reg32 (adev, 0x808, 0x10000);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_verify_init
-+*/
-+static int
-+acxmem_s_verify_init(acx_device_t *adev)
-+{
-+	int result = NOT_OK;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	timeout = jiffies + 2*HZ;
-+	for (;;) {
-+		u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+		if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) {
-+			result = OK;
-+			write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD);
-+			break;
-+		}
-+		if (time_after(jiffies, timeout))
-+			break;
-+		/* Init may take up to ~0.5 sec total */
-+		acx_s_msleep(50);
-+	}
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** A few low-level helpers
-+**
-+** Note: these functions are not protected by lock
-+** and thus are never allowed to be called from IRQ.
-+** Also they must not race with fw upload which uses same hw regs
-+*/
-+
-+/***********************************************************************
-+** acxmem_write_cmd_type_status
-+*/
-+
-+static inline void
-+acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status)
-+{
-+  write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16));
-+  write_flush(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_read_cmd_type_status
-+*/
-+static u32
-+acxmem_read_cmd_type_status(acx_device_t *adev)
-+{
-+	u32 cmd_type, cmd_status;
-+
-+	cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area);
-+
-+	cmd_status = (cmd_type >> 16);
-+	cmd_type = (u16)cmd_type;
-+
-+	log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n",
-+		cmd_type, cmd_status,
-+		acx_cmd_status_str(cmd_status));
-+
-+	return cmd_status;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_reset_dev
-+**
-+** Arguments:
-+**	netdevice that contains the adev variable
-+** Returns:
-+**	NOT_OK on fail
-+**	OK on success
-+** Side effects:
-+**	device is hard reset
-+** Call context:
-+**	acxmem_e_probe
-+** Comment:
-+**	This resets the device using low level hardware calls
-+**	as well as uploads and verifies the firmware to the card
-+*/
-+
-+static inline void
-+init_mboxes(acx_device_t *adev)
-+{
-+	u32 cmd_offs, info_offs;
-+
-+	cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS);
-+	info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS);
-+	adev->cmd_area = (u8*) cmd_offs;
-+	adev->info_area = (u8*) info_offs;
-+	/*
-+	log(L_DEBUG, "iobase2=%p\n"
-+	*/
-+	log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n"
-+		"info_mbox_offset=%X info_area=%p\n",
-+		cmd_offs, adev->cmd_area,
-+		info_offs, adev->info_area);
-+}
-+
-+
-+static inline void
-+read_eeprom_area(acx_device_t *adev)
-+{
-+#if ACX_DEBUG > 1
-+	int offs;
-+	u8 tmp;
-+
-+	for (offs = 0x8c; offs < 0xb9; offs++)
-+		acxmem_read_eeprom_byte(adev, offs, &tmp);
-+#endif
-+}
-+
-+static int
-+acxmem_s_reset_dev(acx_device_t *adev)
-+{
-+	const char* msg = "";
-+	unsigned long flags;
-+	int result = NOT_OK;
-+	u16 hardware_info;
-+	u16 ecpu_ctrl;
-+	int count;
-+	u32 tmp;
-+
-+	FN_ENTER;
-+	/*
-+	write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0);
-+	*/
-+	/* reset the device to make sure the eCPU is stopped
-+	 * to upload the firmware correctly */
-+
-+	acx_lock(adev, flags);
-+
-+	/* Windows driver does some funny things here */
-+	/*
-+	 * clear bit 0x200 in register 0x2A0
-+	 */
-+	clear_regbits (adev, 0x2A0, 0x200);
-+
-+	/*
-+	 * Set bit 0x200 in ACX_GPIO_OUT
-+	 */
-+	set_regbits (adev, IO_ACX_GPIO_OUT, 0x200);
-+
-+	/*
-+	 * read register 0x900 until its value is 0x8400104C, sleeping
-+	 * in between reads if it's not immediate
-+	 */
-+	tmp = read_reg32 (adev, REG_ACX_VENDOR_ID);
-+	count = 500;
-+	while (count-- && (tmp != ACX_VENDOR_ID)) {
-+	  mdelay (10);
-+	  tmp = read_reg32 (adev, REG_ACX_VENDOR_ID);
-+	}
-+
-+	/* end what Windows driver does */
-+
-+	acxmem_l_reset_mac(adev);
-+
-+	ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1;
-+	if (!ecpu_ctrl) {
-+		msg = "eCPU is already running. ";
-+		goto end_unlock;
-+	}
-+
-+#ifdef WE_DONT_NEED_THAT_DO_WE
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) {
-+		/* eCPU most likely means "embedded CPU" */
-+		msg = "eCPU did not start after boot from flash. ";
-+		goto end_unlock;
-+	}
-+
-+	/* check sense on reset flags */
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) {
-+		printk("%s: eCPU did not start after boot (SOR), "
-+			"is this fatal?\n", adev->ndev->name);
-+	}
-+#endif
-+	/* scan, if any, is stopped now, setting corresponding IRQ bit */
-+	adev->irq_status |= HOST_INT_SCAN_COMPLETE;
-+
-+	acx_unlock(adev, flags);
-+	
-+	/* need to know radio type before fw load */
-+	/* Need to wait for arrival of this information in a loop,
-+	 * most probably since eCPU runs some init code from EEPROM
-+	 * (started burst read in reset_mac()) which also
-+	 * sets the radio type ID */
-+
-+	count = 0xffff;
-+	do {
-+		hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION);
-+		if (!--count) {
-+			msg = "eCPU didn't indicate radio type";
-+			goto end_fail;
-+		}
-+		cpu_relax();
-+	} while (!(hardware_info & 0xff00)); /* radio type still zero? */
-+	printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff);
-+	/* printk("DEBUG: count %d\n", count); */
-+	adev->form_factor = hardware_info & 0xff;
-+	adev->radio_type = hardware_info >> 8;
-+
-+	/* load the firmware */
-+	if (OK != acxmem_s_upload_fw(adev))
-+		goto end_fail;
-+
-+	/* acx_s_msleep(10);	this one really shouldn't be required */
-+
-+	/* now start eCPU by clearing bit */
-+	clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1);
-+	log(L_DEBUG, "booted eCPU up and waiting for completion...\n");
-+
-+	/* Windows driver clears bit 0x200 in register 0x2A0 here */
-+	clear_regbits (adev, 0x2A0, 0x200);
-+
-+	/* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */
-+	set_regbits (adev, IO_ACX_GPIO_OUT, 0x200);
-+	/* wait for eCPU bootup */
-+	if (OK != acxmem_s_verify_init(adev)) {
-+		msg = "timeout waiting for eCPU. ";
-+		goto end_fail;
-+	}
-+	log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n");
-+	init_mboxes(adev);
-+	acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0);
-+
-+	/* test that EEPROM is readable */
-+	read_eeprom_area(adev);
-+
-+	result = OK;
-+	goto end;
-+
-+/* Finish error message. Indicate which function failed */
-+end_unlock:
-+	acx_unlock(adev, flags);
-+end_fail:
-+	printk("acx: %sreset_dev() FAILED\n", msg);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_issue_cmd_timeo
-+**
-+** Sends command to fw, extract result
-+**
-+** NB: we do _not_ take lock inside, so be sure to not touch anything
-+** which may interfere with IRQ handler operation
-+**
-+** TODO: busy wait is a bit silly, so:
-+** 1) stop doing many iters - go to sleep after first
-+** 2) go to waitqueue based approach: wait, not poll!
-+*/
-+#undef FUNC
-+#define FUNC "issue_cmd"
-+
-+#if !ACX_DEBUG
-+int
-+acxmem_s_issue_cmd_timeo(
-+	acx_device_t *adev,
-+	unsigned int cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout)
-+{
-+#else
-+int
-+acxmem_s_issue_cmd_timeo_debug(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout,
-+	const char* cmdstr)
-+{
-+	unsigned long start = jiffies;
-+#endif
-+	const char *devname;
-+	unsigned counter;
-+	u16 irqtype;
-+	int i, j;
-+	u8 *p;
-+	u16 cmd_status;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	devname = adev->ndev->name;
-+	if (!devname || !devname[0] || devname[4]=='%')
-+		devname = "acx";
-+
-+	log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n",
-+		cmdstr, buflen, cmd_timeout,
-+		buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1);
-+
-+	if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) {
-+		printk("%s: "FUNC"(): firmware is not loaded yet, "
-+			"cannot execute commands!\n", devname);
-+		goto bad;
-+	}
-+
-+	if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) {
-+		printk("input buffer (len=%u):\n", buflen);
-+		acx_dump_bytes(buffer, buflen);
-+	}
-+
-+	/* wait for firmware to become idle for our command submission */
-+	timeout = HZ/5;
-+	counter = (timeout * 1000 / HZ) - 1; /* in ms */
-+	timeout += jiffies;
-+	do {
-+		cmd_status = acxmem_read_cmd_type_status(adev);
-+		/* Test for IDLE state */
-+		if (!cmd_status)
-+			break;
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	if (!counter) {
-+		/* the card doesn't get idle, we're in trouble */
-+		printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n",
-+			devname, cmd_status);
-+#if DUMP_IF_SLOW > 0
-+		dump_acxmem (adev, 0, 0x10000);
-+		panic ("not idle");
-+#endif
-+		goto bad;
-+	} else if (counter < 190) { /* if waited >10ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. "
-+			"Please report\n", 199 - counter);
-+	}
-+
-+	/* now write the parameters of the command if needed */
-+	if (buffer && buflen) {
-+		/* if it's an INTERROGATE command, just pass the length
-+		 * of parameters to read, as data */
-+#if CMD_DISCOVERY
-+		if (cmd == ACX1xx_CMD_INTERROGATE)
-+			memset_io(adev->cmd_area + 4, 0xAA, buflen);
-+#endif
-+		/*
-+		 * slave memory version
-+		 */
-+		copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, 
-+			       (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen);
-+	}
-+	/* now write the actual command type */
-+	acxmem_write_cmd_type_status(adev, cmd, 0);
-+
-+	/* clear CMD_COMPLETE bit. can be set only by IRQ handler: */
-+	adev->irq_status &= ~HOST_INT_CMD_COMPLETE;
-+
-+	/* execute command */
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD);
-+	write_flush(adev);
-+
-+	/* wait for firmware to process command */
-+
-+	/* Ensure nonzero and not too large timeout.
-+	** Also converts e.g. 100->99, 200->199
-+	** which is nice but not essential */
-+	cmd_timeout = (cmd_timeout-1) | 1;
-+	if (unlikely(cmd_timeout > 1199))
-+		cmd_timeout = 1199;
-+
-+	/* we schedule away sometimes (timeout can be large) */
-+	counter = cmd_timeout;
-+	timeout = jiffies + cmd_timeout * HZ / 1000;
-+	do {
-+		if (!adev->irqs_active) { /* IRQ disabled: poll */
-+			irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+			if (irqtype & HOST_INT_CMD_COMPLETE) {
-+				write_reg16(adev, IO_ACX_IRQ_ACK,
-+						HOST_INT_CMD_COMPLETE);
-+				break;
-+			}
-+		} else { /* Wait when IRQ will set the bit */
-+			irqtype = adev->irq_status;
-+			if (irqtype & HOST_INT_CMD_COMPLETE)
-+				break;
-+		}
-+
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	/* save state for debugging */
-+	cmd_status = acxmem_read_cmd_type_status(adev);
-+
-+	/* put the card in IDLE state */
-+	acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0);
-+
-+	if (!counter) {	/* timed out! */
-+		printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. "
-+			"irq bits:0x%04X irq_status:0x%04X timeout:%dms "
-+			"cmd_status:%d (%s)\n",
-+			devname, (adev->irqs_active) ? "waiting" : "polling",
-+			irqtype, adev->irq_status, cmd_timeout,
-+			cmd_status, acx_cmd_status_str(cmd_status));
-+		printk("%s: "FUNC"(): device irq status 0x%04x\n",
-+		       devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES));
-+		printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n",
-+		       devname,
-+		       read_reg16 (adev, IO_ACX_IRQ_MASK),
-+		       read_reg16 (adev, IO_ACX_FEMR));
-+		if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) {
-+			printk ("acxmem: firmware probably hosed - reloading\n");
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+                	{
-+				pm_message_t state;
-+				acxmem_e_suspend (resume_pdev, state);
-+			}
-+#else
-+			acxmem_e_suspend (adev->dev, 0);
-+#endif
-+			{
-+				struct work_struct *notused;
-+				fw_resumer (notused);
-+			}
-+		}
-+
-+		goto bad;
-+	} else if (cmd_timeout - counter > 30) { /* if waited >30ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. "
-+			"count:%d. Please report\n",
-+			(adev->irqs_active) ? "waited" : "polled",
-+			cmd_timeout - counter, counter);
-+	}
-+
-+	if (1 != cmd_status) { /* it is not a 'Success' */
-+		printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). "
-+			"Took %dms of %d\n",
-+			devname, cmd_status, acx_cmd_status_str(cmd_status),
-+			cmd_timeout - counter, cmd_timeout);
-+		/* zero out result buffer
-+		 * WARNING: this will trash stack in case of illegally large input
-+		 * length! */
-+		if (buflen > 388) {
-+		  /*
-+		   * 388 is maximum command length
-+		   */
-+		  printk ("invalid length 0x%08x\n", buflen);
-+		  buflen = 388;
-+		}
-+		p = (u8 *) buffer;
-+		for (i = 0; i < buflen; i+= 16) {
-+		  printk ("%04x:", i);
-+		  for (j = 0; (j < 16) && (i+j < buflen); j++) {
-+		    printk (" %02x", *p++);
-+		  }
-+		  printk ("\n");
-+		}
-+
-+		if (buffer && buflen)
-+			memset(buffer, 0, buflen);
-+		goto bad;
-+	}
-+
-+	/* read in result parameters if needed */
-+	if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) {
-+		copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen);
-+		if (acx_debug & L_DEBUG) {
-+			printk("output buffer (len=%u): ", buflen);
-+			acx_dump_bytes(buffer, buflen);
-+		}
-+	}
-+
-+/* ok: */
-+	log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n",
-+			 cmdstr, jiffies - start);
-+	FN_EXIT1(OK);
-+	return OK;
-+
-+bad:
-+	/* Give enough info so that callers can avoid
-+	** printing their own diagnostic messages */
-+#if ACX_DEBUG
-+	printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr);
-+#else
-+	printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd);
-+#endif
-+	dump_stack();
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#if defined(NONESSENTIAL_FEATURES)
-+typedef struct device_id {
-+	unsigned char id[6];
-+	char *descr;
-+	char *type;
-+} device_id_t;
-+
-+static const device_id_t
-+device_ids[] =
-+{
-+	{
-+		{'G', 'l', 'o', 'b', 'a', 'l'},
-+		NULL,
-+		NULL,
-+	},
-+	{
-+		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
-+		"uninitialized",
-+		"SpeedStream SS1021 or Gigafast WF721-AEX"
-+	},
-+	{
-+		{0x80, 0x81, 0x82, 0x83, 0x84, 0x85},
-+		"non-standard",
-+		"DrayTek Vigor 520"
-+	},
-+	{
-+		{'?', '?', '?', '?', '?', '?'},
-+		"non-standard",
-+		"Level One WPC-0200"
-+	},
-+	{
-+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
-+		"empty",
-+		"DWL-650+ variant"
-+	}
-+};
-+
-+static void
-+acx_show_card_eeprom_id(acx_device_t *adev)
-+{
-+	unsigned char buffer[CARD_EEPROM_ID_SIZE];
-+	int i;
-+
-+	memset(&buffer, 0, CARD_EEPROM_ID_SIZE);
-+	/* use direct EEPROM access */
-+	for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) {
-+		if (OK != acxmem_read_eeprom_byte(adev,
-+					 ACX100_EEPROM_ID_OFFSET + i,
-+					 &buffer[i])) {
-+			printk("acx: reading EEPROM FAILED\n");
-+			break;
-+		}
-+	}
-+
-+	for (i = 0; i < VEC_SIZE(device_ids); i++) {
-+		if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) {
-+			if (device_ids[i].descr) {
-+				printk("acx: EEPROM card ID string check "
-+					"found %s card ID: is this %s?\n",
-+					device_ids[i].descr, device_ids[i].type);
-+			}
-+			break;
-+		}
-+	}
-+	if (i == VEC_SIZE(device_ids)) {
-+		printk("acx: EEPROM card ID string check found "
-+			"unknown card: expected 'Global', got '%.*s\'. "
-+			"Please report\n", CARD_EEPROM_ID_SIZE, buffer);
-+	}
-+}
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+/***********************************************************************
-+** acxmem_free_desc_queues
-+**
-+** Releases the queues that have been allocated, the
-+** others have been initialised to NULL so this
-+** function can be used if only part of the queues were allocated.
-+*/
-+
-+void
-+acxmem_free_desc_queues(acx_device_t *adev)
-+{
-+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \
-+        if (ptr) { \
-+                kfree(ptr); \
-+                ptr = NULL; \
-+                size = 0; \
-+        }
-+
-+	FN_ENTER;
-+
-+	ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy);
-+
-+	adev->txdesc_start = NULL;
-+
-+	ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy);
-+
-+	adev->rxdesc_start = NULL;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_delete_dma_regions
-+*/
-+static void
-+acxmem_s_delete_dma_regions(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+	/* disable radio Tx/Rx. Shouldn't we use the firmware commands
-+	 * here instead? Or are we that much down the road that it's no
-+	 * longer possible here? */
-+	/*
-+	 * slave memory interface really doesn't like this.
-+	 */
-+	/*
-+	write_reg16(adev, IO_ACX_ENABLE, 0);
-+	*/
-+
-+	acx_s_msleep(100);
-+
-+	acx_lock(adev, flags);
-+	acxmem_free_desc_queues(adev);
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_probe
-+**
-+** Probe routine called when a PCI device w/ matching ID is found.
-+** Here's the sequence:
-+**   - Allocate the PCI resources.
-+**   - Read the PCMCIA attribute memory to make sure we have a WLAN card
-+**   - Reset the MAC
-+**   - Initialize the dev and wlan data
-+**   - Initialize the MAC
-+**
-+** pdev	- ptr to pci device structure containing info about pci configuration
-+** id	- ptr to the device id entry that matched this device
-+*/
-+static const u16
-+IO_ACX100[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_END_CTL */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x007c, /* IO_ACX_INT_TRIG */
-+	0x0098, /* IO_ACX_IRQ_MASK */
-+	0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00ac, /* IO_ACX_IRQ_ACK */
-+	0x00b0, /* IO_ACX_HINT_TRIG */
-+
-+	0x0104, /* IO_ACX_ENABLE */
-+
-+	0x0250, /* IO_ACX_EEPROM_CTL */
-+	0x0254, /* IO_ACX_EEPROM_ADDR */
-+	0x0258, /* IO_ACX_EEPROM_DATA */
-+	0x025c, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0268, /* IO_ACX_PHY_ADDR */
-+	0x026c, /* IO_ACX_PHY_DATA */
-+	0x0270, /* IO_ACX_PHY_CTL */
-+
-+	0x0290, /* IO_ACX_GPIO_OE */
-+
-+	0x0298, /* IO_ACX_GPIO_OUT */
-+
-+	0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x02ac, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x02d0, /* IO_ACX_EE_START */
-+	0x02d4, /* IO_ACX_SOR_CFG */
-+	0x02d8 /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static const u16
-+IO_ACX111[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_MEM_CP */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x00b4, /* IO_ACX_INT_TRIG */
-+	0x00d4, /* IO_ACX_IRQ_MASK */
-+	/* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */
-+	0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00e8, /* IO_ACX_IRQ_ACK */
-+	0x00ec, /* IO_ACX_HINT_TRIG */
-+
-+	0x01d0, /* IO_ACX_ENABLE */
-+
-+	0x0338, /* IO_ACX_EEPROM_CTL */
-+	0x033c, /* IO_ACX_EEPROM_ADDR */
-+	0x0340, /* IO_ACX_EEPROM_DATA */
-+	0x0344, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0350, /* IO_ACX_PHY_ADDR */
-+	0x0354, /* IO_ACX_PHY_DATA */
-+	0x0358, /* IO_ACX_PHY_CTL */
-+
-+	0x0374, /* IO_ACX_GPIO_OE */
-+
-+	0x037c, /* IO_ACX_GPIO_OUT */
-+
-+	0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x0390, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x0100, /* IO_ACX_EE_START */
-+	0x0104, /* IO_ACX_SOR_CFG */
-+	0x0108, /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static void
-+dummy_netdev_init(struct net_device *ndev) {}
-+
-+/*
-+ * Most of the acx specific pieces of hardware reset.
-+ */
-+static int
-+acxmem_complete_hw_reset (acx_device_t *adev)
-+{
-+	acx111_ie_configoption_t co;
-+
-+	/* NB: read_reg() reads may return bogus data before reset_dev(),
-+	 * since the firmware which directly controls large parts of the I/O
-+	 * registers isn't initialized yet.
-+	 * acx100 seems to be more affected than acx111 */
-+	if (OK != acxmem_s_reset_dev (adev))
-+	  return -1;
-+
-+	if (IS_ACX100(adev)) {
-+		/* ACX100: configopt struct in cmd mailbox - directly after reset */
-+		copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co));
-+	}
-+
-+	if (OK != acx_s_init_mac(adev))
-+	  return -3;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111: configopt struct needs to be queried after full init */
-+		acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS);
-+	}
-+
-+	/*
-+	 * Set up transmit buffer administration
-+	 */
-+	init_acx_txbuf (adev);
-+
-+	/*
-+	 * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor
-+	 * is 3.  It also write protects the EEPROM by writing 1<<9 to GPIO_OUT
-+	 */
-+	if (adev->form_factor == 3) {
-+	  set_regbits (adev, 0x288, 0x01000000);
-+	  set_regbits (adev, 0x298, 1<<9);
-+	}
-+
-+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */
-+	if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version))
-+	  return -2;
-+
-+	acx_s_parse_configoption(adev, &co);
-+	acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */
-+	acx_display_hardware_details(adev);
-+
-+	return 0;
-+}
-+
-+static int __devinit
-+acxmem_e_probe(struct platform_device *pdev)
-+{
-+	struct acx_hardware_data *hwdata = pdev->dev.platform_data;
-+	acx_device_t *adev = NULL;
-+	struct net_device *ndev = NULL;
-+	const char *chip_name;
-+	int result = -EIO;
-+	int err;
-+	int i;
-+	unsigned long addr_size=0;
-+	u8 chip_type;
-+
-+	FN_ENTER;
-+	(void) hwdata->start_hw();
-+
-+	/* FIXME: prism54 calls pci_set_mwi() here,
-+	 * should we do/support the same? */
-+
-+	/* chiptype is u8 but id->driver_data is ulong
-+	** Works for now (possible values are 1 and 2) */
-+	chip_type = CHIPTYPE_ACX100;
-+	/* acx100 and acx111 have different PCI memory regions */
-+	if (chip_type == CHIPTYPE_ACX100) {
-+		chip_name = "ACX100";
-+	} else if (chip_type == CHIPTYPE_ACX111) {
-+		chip_name = "ACX111";
-+	} else {
-+		printk("acx: unknown chip type 0x%04X\n", chip_type);
-+		goto fail_unknown_chiptype;
-+	}
-+
-+	printk("acx: found %s-based wireless network card\n", chip_name);
-+	log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug);
-+
-+	ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init);
-+	/* (NB: memsets to 0 entire area) */
-+	if (!ndev) {
-+		printk("acx: no memory for netdevice struct\n");
-+		goto fail_alloc_netdev;
-+	}
-+
-+	platform_set_drvdata (pdev, ndev);
-+
-+	ether_setup(ndev);
-+
-+	/*
-+	 * use platform_data resources that were provided
-+	 */
-+	ndev->irq = 0;
-+	for (i=0; i<pdev->num_resources; i++) {
-+		if (pdev->resource[i].flags == IORESOURCE_IRQ) {
-+			ndev->irq = pdev->resource[i].start;
-+		}
-+		else if (pdev->resource[i].flags == IORESOURCE_MEM) {
-+			ndev->base_addr = pdev->resource[i].start;
-+			addr_size = pdev->resource[i].end - pdev->resource[i].start;
-+		}
-+	}
-+	if (addr_size == 0 || ndev->irq == 0)
-+		goto fail_hw_params;
-+	ndev->open = &acxmem_e_open;
-+	ndev->stop = &acxmem_e_close;
-+	pdev->dev.release = &acxmem_e_release;
-+	ndev->hard_start_xmit = &acx_i_start_xmit;
-+	ndev->get_stats = &acx_e_get_stats;
-+#if IW_HANDLER_VERSION <= 5
-+	ndev->get_wireless_stats = &acx_e_get_wireless_stats;
-+#endif
-+	ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
-+	ndev->set_multicast_list = &acxmem_i_set_multicast_list;
-+	ndev->tx_timeout = &acxmem_i_tx_timeout;
-+	ndev->change_mtu = &acx_e_change_mtu;
-+	ndev->watchdog_timeo = 4 * HZ;
-+
-+	adev = ndev2adev(ndev);
-+	spin_lock_init(&adev->lock);	/* initial state: unlocked */
-+	spin_lock_init(&adev->txbuf_lock);
-+	/* We do not start with downed sem: we want PARANOID_LOCKING to work */
-+	sema_init(&adev->sem, 1);	/* initial state: 1 (upped) */
-+	/* since nobody can see new netdev yet, we can as well
-+	** just _presume_ that we're under sem (instead of actually taking it): */
-+	/* acx_sem_lock(adev); */
-+	adev->dev = &pdev->dev;
-+	adev->ndev = ndev;
-+	adev->dev_type = DEVTYPE_MEM;
-+	adev->chip_type = chip_type;
-+	adev->chip_name = chip_name;
-+	adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111;
-+	adev->membase = (volatile u32 *) ndev->base_addr;
-+	adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size);
-+	/* to find crashes due to weird driver access
-+	 * to unconfigured interface (ifup) */
-+	adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead;
-+
-+#if defined(NONESSENTIAL_FEATURES)
-+	acx_show_card_eeprom_id(adev);
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+#ifdef SET_MODULE_OWNER
-+	SET_MODULE_OWNER(ndev);
-+#endif
-+	SET_NETDEV_DEV(ndev, &pdev->dev);
-+
-+	log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq);
-+
-+	/* ok, pci setup is finished, now start initializing the card */
-+
-+	if (OK != acxmem_complete_hw_reset (adev))
-+	  goto fail_reset;
-+
-+	/*
-+	 * Set up default things for most of the card settings.
-+	 */
-+	acx_s_set_defaults(adev);
-+
-+	/* Register the card, AFTER everything else has been set up,
-+	 * since otherwise an ioctl could step on our feet due to
-+	 * firmware operations happening in parallel or uninitialized data */
-+	err = register_netdev(ndev);
-+	if (OK != err) {
-+		printk("acx: register_netdev() FAILED: %d\n", err);
-+		goto fail_register_netdev;
-+	}
-+
-+	acx_proc_register_entries(ndev);
-+
-+	/* Now we have our device, so make sure the kernel doesn't try
-+	 * to send packets even though we're not associated to a network yet */
-+	acx_stop_queue(ndev, "on probe");
-+	acx_carrier_off(ndev, "on probe");
-+
-+	/*
-+	 * Set up a default monitor type so that poor combinations of initialization
-+	 * sequences in monitor mode don't end up destroying the hardware type.
-+	 */
-+	adev->monitor_type = ARPHRD_ETHER;
-+
-+	/*
-+	 * Register to receive inetaddr notifier changes.  This will allow us to
-+	 * catch if the user changes the MAC address of the interface.
-+	 */
-+	register_netdevice_notifier(&acx_netdev_notifier);
-+
-+	/* after register_netdev() userspace may start working with dev
-+	 * (in particular, on other CPUs), we only need to up the sem */
-+	/* acx_sem_unlock(adev); */
-+
-+	printk("acx "ACX_RELEASE": net device %s, driver compiled "
-+		"against wireless extensions %d and Linux %s\n",
-+		ndev->name, WIRELESS_EXT, UTS_RELEASE);
-+
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	result = OK;
-+	goto done;
-+
-+	/* error paths: undo everything in reverse order... */
-+
-+fail_register_netdev:
-+
-+	acxmem_s_delete_dma_regions(adev);
-+
-+fail_reset:
-+fail_hw_params:
-+	free_netdev(ndev);
-+fail_alloc_netdev:
-+fail_unknown_chiptype:
-+
-+
-+done:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_remove
-+**
-+** Shut device down (if not hot unplugged)
-+** and deallocate PCI resources for the acx chip.
-+**
-+** pdev - ptr to PCI device structure containing info about pci configuration
-+*/
-+static int __devexit
-+acxmem_e_remove(struct platform_device *pdev)
-+{
-+	struct acx_hardware_data *hwdata = pdev->dev.platform_data;
-+	struct net_device *ndev;
-+	acx_device_t *adev;
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	ndev = (struct net_device*) platform_get_drvdata(pdev);
-+	if (!ndev) {
-+		log(L_DEBUG, "%s: card is unused. Skipping any release code\n",
-+			__func__);
-+		goto end;
-+	}
-+
-+	adev = ndev2adev(ndev);
-+
-+	/* If device wasn't hot unplugged... */
-+	if (adev_present(adev)) {
-+
-+		acx_sem_lock(adev);
-+
-+		/* disable both Tx and Rx to shut radio down properly */
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+
-+#ifdef REDUNDANT
-+		/* put the eCPU to sleep to save power
-+		 * Halting is not possible currently,
-+		 * since not supported by all firmware versions */
-+		acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0);
-+#endif
-+		acx_lock(adev, flags);
-+
-+		/* disable power LED to save power :-) */
-+		log(L_INIT, "switching off power LED to save power\n");
-+		acxmem_l_power_led(adev, 0);
-+
-+		/* stop our eCPU */
-+		if (IS_ACX111(adev)) {
-+			/* FIXME: does this actually keep halting the eCPU?
-+			 * I don't think so...
-+			 */
-+			acxmem_l_reset_mac(adev);
-+		} else {
-+			u16 temp;
-+
-+			/* halt eCPU */
-+			temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1;
-+			write_reg16(adev, IO_ACX_ECPU_CTRL, temp);
-+			write_flush(adev);
-+		}
-+
-+		acx_unlock(adev, flags);
-+
-+		acx_sem_unlock(adev);
-+	}
-+
-+
-+	/*
-+	 * Unregister the notifier chain
-+	 */
-+	unregister_netdevice_notifier(&acx_netdev_notifier);
-+
-+	/* unregister the device to not let the kernel
-+	 * (e.g. ioctls) access a half-deconfigured device
-+	 * NB: this will cause acxmem_e_close() to be called,
-+	 * thus we shouldn't call it under sem! */
-+	log(L_INIT, "removing device %s\n", ndev->name);
-+	unregister_netdev(ndev);
-+
-+	/* unregister_netdev ensures that no references to us left.
-+	 * For paranoid reasons we continue to follow the rules */
-+	acx_sem_lock(adev);
-+
-+	if (adev->dev_state_mask & ACX_STATE_IFACE_UP) {
-+		acxmem_s_down(ndev);
-+		CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	}
-+
-+	acx_proc_unregister_entries(ndev);
-+
-+	acxmem_s_delete_dma_regions(adev);
-+
-+	/* finally, clean up PCI bus state */
-+	if (adev->iobase) iounmap((void *)adev->iobase);
-+
-+	acx_sem_unlock(adev);
-+
-+	/* Free netdev (quite late,
-+	 * since otherwise we might get caught off-guard
-+	 * by a netdev timeout handler execution
-+	 * expecting to see a working dev...) */
-+	free_netdev(ndev);
-+
-+	(void) hwdata->stop_hw();
-+
-+	printk ("e_remove done\n");
-+end:
-+	FN_EXIT0;
-+
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** TODO: PM code needs to be fixed / debugged / tested.
-+*/
-+#ifdef CONFIG_PM
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxmem_e_suspend(struct platform_device *pdev, pm_message_t state)
-+#else
-+acxmem_e_suspend(struct device *pdev, u32 state)
-+#endif
-+{
-+	struct net_device *ndev = platform_get_drvdata(pdev);
-+	acx_device_t *adev;
-+	struct acx_hardware_data *hwdata;
-+
-+	FN_ENTER;
-+	printk("acx: suspend handler is experimental!\n");
-+	printk("sus: dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		goto end;
-+
-+	adev = ndev2adev(ndev);
-+	printk("sus: adev %p\n", adev);
-+
-+	hwdata = adev->dev->platform_data;
-+
-+	acx_sem_lock(adev);
-+
-+	netif_device_detach(ndev);	/* this one cannot sleep */
-+	acxmem_s_down(ndev);
-+	/* down() does not set it to 0xffff, but here we really want that */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	acxmem_s_delete_dma_regions(adev);
-+
-+	/*
-+	 * Turn the ACX chip off.
-+	 */
-+	hwdata->stop_hw();
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+
-+static void
-+fw_resumer(struct work_struct *notused)
-+{
-+        struct platform_device *pdev = resume_pdev;
-+	struct net_device *ndev = platform_get_drvdata(pdev);
-+	acx_device_t *adev;
-+	struct acx_hardware_data *hwdata;
-+
-+	printk("acx: resume handler is experimental!\n");
-+	printk("rsm: got dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		return;
-+
-+	adev = ndev2adev(ndev);
-+	printk("rsm: got adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	hwdata = adev->dev->platform_data;
-+
-+	/*
-+	 * Turn on the ACX.
-+	 */
-+	hwdata->start_hw();
-+
-+	acxmem_complete_hw_reset (adev);
-+
-+	/*
-+	 * done by acx_s_set_defaults for initial startup
-+	 */
-+	acxmem_set_interrupt_mask(adev);
-+
-+	printk ("rsm: bringing up interface\n");
-+	SET_BIT (adev->set_mask, GETSET_ALL);
-+	acxmem_s_up(ndev);
-+	printk("rsm: acx up done\n");
-+
-+	/* now even reload all card parameters as they were before suspend,
-+	 * and possibly be back in the network again already :-) 
-+	 */
-+	/* - most settings updated in acxmem_s_up()
-+	if (ACX_STATE_IFACE_UP & adev->dev_state_mask) {
-+		adev->set_mask = GETSET_ALL;
-+		acx_s_update_card_settings(adev);
-+		printk("rsm: settings updated\n");
-+	}
-+	*/
-+	netif_device_attach(ndev);
-+	printk("rsm: device attached\n");
-+
-+	acx_sem_unlock(adev);
-+}
-+
-+DECLARE_WORK( fw_resume_work, fw_resumer );
-+
-+static int
-+acxmem_e_resume(struct platform_device *pdev)
-+{
-+	FN_ENTER;
-+
-+	resume_pdev = pdev;
-+	schedule_work( &fw_resume_work );
-+
-+	FN_EXIT0;
-+	return OK;
-+}
-+#endif /* CONFIG_PM */
-+
-+
-+/***********************************************************************
-+** acxmem_s_up
-+**
-+** This function is called by acxmem_e_open (when ifconfig sets the device as up)
-+**
-+** Side effects:
-+** - Enables on-card interrupt requests
-+** - calls acx_s_start
-+*/
-+
-+static void
-+enable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask);
-+	write_reg16(adev, IO_ACX_FEMR, 0x8000);
-+	adev->irqs_active = 1;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxmem_s_up(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+	enable_acx_irq(adev);
-+	acx_unlock(adev, flags);
-+
-+	/* acx fw < 1.9.3.e has a hardware timer, and older drivers
-+	** used to use it. But we don't do that anymore, our OS
-+	** has reliable software timers */
-+	init_timer(&adev->mgmt_timer);
-+	adev->mgmt_timer.function = acx_i_timer;
-+	adev->mgmt_timer.data = (unsigned long)adev;
-+
-+	/* Need to set ACX_STATE_IFACE_UP first, or else
-+	** timer won't be started by acx_set_status() */
-+	SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_2_STA:
-+		/* actual scan cmd will happen in start() */
-+		acx_set_status(adev, ACX_STATUS_1_SCANNING); break;
-+	case ACX_MODE_3_AP:
-+	case ACX_MODE_MONITOR:
-+		acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break;
-+	}
-+
-+	acx_s_start(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_down
-+**
-+** This disables the netdevice
-+**
-+** Side effects:
-+** - disables on-card interrupt request
-+*/
-+
-+static void
-+disable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+
-+	/* I guess mask is not 0xffff because acx100 won't signal
-+	** cmd completion then (needed for ifup).
-+	** Someone with acx100 please confirm */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	adev->irqs_active = 0;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxmem_s_down(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	/* Disable IRQs first, so that IRQs cannot race with us */
-+	/* then wait until interrupts have finished executing on other CPUs */
-+	acx_lock(adev, flags);
-+	disable_acx_irq(adev);
-+	synchronize_irq(adev->pdev->irq);
-+	acx_unlock(adev, flags);
-+
-+	/* we really don't want to have an asynchronous tasklet disturb us
-+	** after something vital for its job has been shut down, so
-+	** end all remaining work now.
-+	**
-+	** NB: carrier_off (done by set_status below) would lead to
-+	** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK().
-+	** That's why we do FLUSH first.
-+	**
-+	** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK()
-+	** waits for acx_e_after_interrupt_task to complete if it is running
-+	** on another CPU, but acx_e_after_interrupt_task
-+	** will sleep on sem forever, because it is taken by us!
-+	** Work around that by temporary sem unlock.
-+	** This will fail miserably if we'll be hit by concurrent
-+	** iwconfig or something in between. TODO! */
-+	acx_sem_unlock(adev);
-+	FLUSH_SCHEDULED_WORK();
-+	acx_sem_lock(adev);
-+
-+	/* This is possible:
-+	** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task ->
-+	** -> set_status(ASSOCIATED) -> wake_queue()
-+	** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK
-+	** lock/unlock is just paranoia, maybe not needed */
-+	acx_lock(adev, flags);
-+	acx_stop_queue(ndev, "on ifdown");
-+	acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+	acx_unlock(adev, flags);
-+
-+	/* kernel/timer.c says it's illegal to del_timer_sync()
-+	** a timer which restarts itself. We guarantee this cannot
-+	** ever happen because acx_i_timer() never does this if
-+	** status is ACX_STATUS_0_STOPPED */
-+	del_timer_sync(&adev->mgmt_timer);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_open
-+**
-+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP
-+** from clear to set. In other words: ifconfig up.
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxmem_e_open(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_init_task_scheduler(adev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */
-+
-+	/* request shared IRQ handler */
-+	if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) {
-+		printk("%s: request_irq FAILED\n", ndev->name);
-+		result = -EAGAIN;
-+		goto done;
-+	}
-+	set_irq_type (ndev->irq, IRQT_FALLING);
-+	log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq);
-+
-+	/* ifup device */
-+	acxmem_s_up(ndev);
-+
-+	/* We don't currently have to do anything else.
-+	 * The setup of the MAC should be subsequently completed via
-+	 * the mlme commands.
-+	 * Higher layers know we're ready from dev->start==1 and
-+	 * dev->tbusy==0.  Our rx path knows to pass up received/
-+	 * frames because of dev->flags&IFF_UP is true.
-+	 */
-+done:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_close
-+**
-+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
-+** from set to clear. I.e. called by "ifconfig DEV down"
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxmem_e_close(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* ifdown device */
-+	CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	if (netif_device_present(ndev)) {
-+		acxmem_s_down(ndev);
-+	}
-+
-+	/* disable all IRQs, release shared IRQ handler */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	free_irq(ndev->irq, ndev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */
-+
-+	/* We currently don't have to do anything else.
-+	 * Higher layers know we're not ready from dev->start==0 and
-+	 * dev->tbusy==1.  Our rx path knows to not pass up received
-+	 * frames because of dev->flags&IFF_UP is false.
-+	 */
-+	acx_sem_unlock(adev);
-+
-+	log(L_INIT, "closed device\n");
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_tx_timeout
-+**
-+** Called from network core. Must not sleep!
-+*/
-+static void
-+acxmem_i_tx_timeout(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	unsigned int tx_num_cleaned;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* clean processed tx descs, they may have been completely full */
-+	tx_num_cleaned = acxmem_l_clean_txdesc(adev);
-+
-+	/* nothing cleaned, yet (almost) no free buffers available?
-+	 * --> clean all tx descs, no matter which status!!
-+	 * Note that I strongly suspect that doing emergency cleaning
-+	 * may confuse the firmware. This is a last ditch effort to get
-+	 * ANYTHING to work again...
-+	 *
-+	 * TODO: it's best to simply reset & reinit hw from scratch...
-+	 */
-+	if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) {
-+		printk("%s: FAILED to free any of the many full tx buffers. "
-+			"Switching to emergency freeing. "
-+			"Please report!\n", ndev->name);
-+		acxmem_l_clean_txdesc_emergency(adev);
-+	}
-+
-+	if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status))
-+		acx_wake_queue(ndev, "after tx timeout");
-+
-+	/* stall may have happened due to radio drift, so recalib radio */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+
-+	/* do unimportant work last */
-+	printk("%s: tx timeout!\n", ndev->name);
-+	adev->stats.tx_errors++;
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_set_multicast_list
-+** FIXME: most likely needs refinement
-+*/
-+static void
-+acxmem_i_set_multicast_list(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* firmwares don't have allmulti capability,
-+	 * so just use promiscuous mode instead in this case. */
-+	if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
-+		SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		/* let kernel know in case *we* needed to set promiscuous */
-+		ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI);
-+	} else {
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI);
-+	}
-+
-+	/* cannot update card settings directly here, atomic context */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_l_process_rxdesc
-+**
-+** Called directly and only from the IRQ handler
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_rxbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_rxbuffer(const acx_device_t *adev)
-+{
-+	register const struct rxhostdesc *rxhostdesc;
-+	int i;
-+	/* no FN_ENTER here, we don't want that */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+	if (unlikely(!rxhostdesc)) return;
-+	for (i = 0; i < RX_CNT; i++) {
-+		if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			printk("rx: buf %d full\n", i);
-+		rxhostdesc++;
-+	}
-+}
-+#endif
-+
-+static void
-+acxmem_l_process_rxdesc(acx_device_t *adev)
-+{
-+	register rxhostdesc_t *hostdesc;
-+	register rxdesc_t *rxdesc;
-+	unsigned count, tail;
-+	u32 addr;
-+	u8 Ctl_8;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(acx_debug & L_BUFR))
-+		log_rxbuffer(adev);
-+
-+	/* First, have a loop to determine the first descriptor that's
-+	 * full, just in case there's a mismatch between our current
-+	 * rx_tail and the full descriptor we're supposed to handle. */
-+	tail = adev->rx_tail;
-+	count = RX_CNT;
-+	while (1) {
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		rxdesc = &adev->rxdesc_start[tail];
-+		/* advance tail regardless of outcome of the below test */
-+		tail = (tail + 1) % RX_CNT;
-+
-+		/*
-+		 * Unlike the PCI interface, where the ACX can write directly to
-+		 * the host descriptors, on the slave memory interface we have to
-+		 * pull these.  All we really need to do is check the Ctl_8 field
-+		 * in the rx descriptor on the ACX, which should be 0x11000000 if
-+		 * we should process it.
-+		 */
-+		Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+                if ((Ctl_8 & DESC_CTL_HOSTOWN) &&
-+		    (Ctl_8 & DESC_CTL_ACXDONE))
-+		  break;		/* found it! */
-+
-+		if (unlikely(!--count))	/* hmm, no luck: all descs empty, bail out */
-+			goto end;
-+	}
-+
-+	/* now process descriptors, starting with the first we figured out */
-+	while (1) {
-+		log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n",	tail, Ctl_8);
-+		/*
-+		 * If the ACX has CTL_RECLAIM set on this descriptor there
-+		 * is no buffer associated; it just wants us to tell it to
-+		 * reclaim the memory.
-+		 */
-+		if (!(Ctl_8 & DESC_CTL_RECLAIM)) {
-+
-+		  /*
-+		 * slave interface - pull data now
-+		 */
-+		hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length));
-+
-+		/*
-+		 * hostdesc->data is an rxbuffer_t, which includes header information,
-+		 * but the length in the data packet doesn't.  The header information
-+		 * takes up an additional 12 bytes, so add that to the length we copy.
-+		 */
-+		addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr));
-+		  if (addr) {
-+		    /*
-+		     * How can &(rxdesc->ACXMemPtr) above ever be zero?  Looks like we
-+		     * get that now and then - try to trap it for debug.
-+		     */
-+		    if (addr & 0xffff0000) {
-+		      printk("rxdesc 0x%08x\n", (u32) rxdesc);
-+		      dump_acxmem (adev, 0, 0x10000);
-+		      panic ("Bad access!");
-+		    }
-+		  chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr,
-+					   hostdesc->length +
-+					   (u32) &((rxbuffer_t *)0)->hdr_a3);
-+		acx_l_process_rxbuf(adev, hostdesc->data);
-+		  }
-+		}
-+		else {
-+		  printk ("rx reclaim only!\n");
-+		}
-+
-+		hostdesc->Status = 0;
-+
-+		/*
-+		 * Let the ACX know we're done.
-+		 */
-+		CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN);
-+                SET_BIT (Ctl_8, DESC_CTL_HOSTDONE);
-+		SET_BIT (Ctl_8, DESC_CTL_RECLAIM);
-+		write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8);
-+
-+		/*
-+		 * Now tell the ACX we've finished with the receive buffer so 
-+		 * it can finish the reclaim.
-+		 */
-+		write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC);
-+
-+		/* ok, descriptor is handled, now check the next descriptor */
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		rxdesc = &adev->rxdesc_start[tail];
-+
-+		Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+
-+		/* if next descriptor is empty, then bail out */
-+		if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE))
-+			break;
-+
-+		tail = (tail + 1) % RX_CNT;
-+	}
-+end:
-+	adev->rx_tail = tail;
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_interrupt
-+**
-+** IRQ handler (atomic context, must not sleep, blah, blah)
-+*/
-+
-+/* scan is complete. all frames now on the receive queue are valid */
-+#define INFO_SCAN_COMPLETE      0x0001
-+#define INFO_WEP_KEY_NOT_FOUND  0x0002
-+/* hw has been reset as the result of a watchdog timer timeout */
-+#define INFO_WATCH_DOG_RESET    0x0003
-+/* failed to send out NULL frame from PS mode notification to AP */
-+/* recommended action: try entering 802.11 PS mode again */
-+#define INFO_PS_FAIL            0x0004
-+/* encryption/decryption process on a packet failed */
-+#define INFO_IV_ICV_FAILURE     0x0005
-+
-+/* Info mailbox format:
-+2 bytes: type
-+2 bytes: status
-+more bytes may follow
-+    rumors say about status:
-+	0x0000 info available (set by hw)
-+	0x0001 information received (must be set by host)
-+	0x1000 info available, mailbox overflowed (messages lost) (set by hw)
-+    but in practice we've seen:
-+	0x9000 when we did not set status to 0x0001 on prev message
-+	0x1001 when we did set it
-+	0x0000 was never seen
-+    conclusion: this is really a bitfield:
-+    0x1000 is 'info available' bit
-+    'mailbox overflowed' bit is 0x8000, not 0x1000
-+    value of 0x0000 probably means that there are no messages at all
-+    P.S. I dunno how in hell hw is supposed to notice that messages are lost -
-+    it does NOT clear bit 0x0001, and this bit will probably stay forever set
-+    after we set it once. Let's hope this will be fixed in firmware someday
-+*/
-+
-+static void
-+handle_info_irq(acx_device_t *adev)
-+{
-+#if ACX_DEBUG
-+	static const char * const info_type_msg[] = {
-+		"(unknown)",
-+		"scan complete",
-+		"WEP key not found",
-+		"internal watchdog reset was done",
-+		"failed to send powersave (NULL frame) notification to AP",
-+		"encrypt/decrypt on a packet has failed",
-+		"TKIP tx keys disabled",
-+		"TKIP rx keys disabled",
-+		"TKIP rx: key ID not found",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"TKIP IV value exceeds thresh"
-+	};
-+#endif
-+	u32 info_type, info_status;
-+
-+	info_type = read_slavemem32 (adev, (u32) adev->info_area);
-+
-+	info_status = (info_type >> 16);
-+	info_type = (u16)info_type;
-+
-+	/* inform fw that we have read this info message */
-+	write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000);
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK);
-+	write_flush(adev);
-+
-+	log(L_CTL, "info_type:%04X info_status:%04X\n",
-+			info_type, info_status);
-+
-+	log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n",
-+		info_status, info_type,
-+		info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ?
-+				0 : info_type]
-+	);
-+}
-+
-+
-+static void
-+log_unusual_irq(u16 irqtype) {
-+	/*
-+	if (!printk_ratelimit())
-+		return;
-+	*/
-+
-+	printk("acx: got");
-+	if (irqtype & HOST_INT_TX_XFER) {
-+		printk(" Tx_Xfer");
-+	}
-+	if (irqtype & HOST_INT_RX_COMPLETE) {
-+		printk(" Rx_Complete");
-+	}
-+	if (irqtype & HOST_INT_DTIM) {
-+		printk(" DTIM");
-+	}
-+	if (irqtype & HOST_INT_BEACON) {
-+		printk(" Beacon");
-+	}
-+	if (irqtype & HOST_INT_TIMER) {
-+		log(L_IRQ, " Timer");
-+	}
-+	if (irqtype & HOST_INT_KEY_NOT_FOUND) {
-+		printk(" Key_Not_Found");
-+	}
-+	if (irqtype & HOST_INT_IV_ICV_FAILURE) {
-+		printk(" IV_ICV_Failure (crypto)");
-+	}
-+		/* HOST_INT_CMD_COMPLETE  */
-+		/* HOST_INT_INFO          */
-+	if (irqtype & HOST_INT_OVERFLOW) {
-+		printk(" Overflow");
-+	}
-+	if (irqtype & HOST_INT_PROCESS_ERROR) {
-+		printk(" Process_Error");
-+	}
-+		/* HOST_INT_SCAN_COMPLETE */
-+	if (irqtype & HOST_INT_FCS_THRESHOLD) {
-+		printk(" FCS_Threshold");
-+	}
-+	if (irqtype & HOST_INT_UNKNOWN) {
-+		printk(" Unknown");
-+	}
-+	printk(" IRQ(s)\n");
-+}
-+
-+
-+static void
-+update_link_quality_led(acx_device_t *adev)
-+{
-+	int qual;
-+
-+	qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise);
-+	if (qual > adev->brange_max_quality)
-+		qual = adev->brange_max_quality;
-+
-+	if (time_after(jiffies, adev->brange_time_last_state_change +
-+				(HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) {
-+		acxmem_l_power_led(adev, (adev->brange_last_state == 0));
-+		adev->brange_last_state ^= 1; /* toggle */
-+		adev->brange_time_last_state_change = jiffies;
-+	}
-+}
-+
-+
-+#define MAX_IRQLOOPS_PER_JIFFY  (20000/HZ) /* a la orinoco.c */
-+
-+static irqreturn_t
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxmem_i_interrupt(int irq, void *dev_id)
-+#else
-+acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	unsigned long flags;
-+	unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY;
-+	register u16 irqtype;
-+	u16 unmasked;
-+
-+	adev = ndev2adev((struct net_device*)dev_id);
-+
-+	/* LOCKING: can just spin_lock() since IRQs are disabled anyway.
-+	 * I am paranoid */
-+	acx_lock(adev, flags);
-+
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	if (unlikely(0xffff == unmasked)) {
-+		/* 0xffff value hints at missing hardware,
-+		 * so don't do anything.
-+		 * Not very clean, but other drivers do the same... */
-+		log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n");
-+		goto none;
-+	}
-+
-+	/* We will check only "interesting" IRQ types */
-+	irqtype = unmasked & ~adev->irq_mask;
-+	if (!irqtype) {
-+		/* We are on a shared IRQ line and it wasn't our IRQ */
-+		log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n",
-+			unmasked, adev->irq_mask);
-+		goto none;
-+	}
-+
-+	/* Done here because IRQ_NONEs taking three lines of log
-+	** drive me crazy */
-+	FN_ENTER;
-+
-+#define IRQ_ITERATE 1
-+#if IRQ_ITERATE
-+if (jiffies != adev->irq_last_jiffies) {
-+	adev->irq_loops_this_jiffy = 0;
-+	adev->irq_last_jiffies = jiffies;
-+}
-+
-+/* safety condition; we'll normally abort loop below
-+ * in case no IRQ type occurred */
-+while (likely(--irqcount)) {
-+#endif
-+	/* ACK all IRQs ASAP */
-+	write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff);
-+
-+	log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n",
-+				unmasked, adev->irq_mask, irqtype);
-+
-+	/* Handle most important IRQ types first */
-+	if (irqtype & HOST_INT_RX_DATA) {
-+		log(L_IRQ, "got Rx_Data IRQ\n");
-+		acxmem_l_process_rxdesc(adev);
-+	}
-+	if (irqtype & HOST_INT_TX_COMPLETE) {
-+		log(L_IRQ, "got Tx_Complete IRQ\n");
-+		/* don't clean up on each Tx complete, wait a bit
-+		 * unless we're going towards full, in which case
-+		 * we do it immediately, too (otherwise we might lockup
-+		 * with a full Tx buffer if we go into
-+		 * acxmem_l_clean_txdesc() at a time when we won't wakeup
-+		 * the net queue in there for some reason...) */
-+		if (adev->tx_free <= TX_START_CLEAN) {
-+#if TX_CLEANUP_IN_SOFTIRQ
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP);
-+#else
-+			acxmem_l_clean_txdesc(adev);
-+#endif
-+		}
-+	}
-+
-+	/* Less frequent ones */
-+	if (irqtype & (0
-+		| HOST_INT_CMD_COMPLETE
-+		| HOST_INT_INFO
-+		| HOST_INT_SCAN_COMPLETE
-+	)) {
-+		if (irqtype & HOST_INT_CMD_COMPLETE) {
-+			log(L_IRQ, "got Command_Complete IRQ\n");
-+			/* save the state for the running issue_cmd() */
-+			SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE);
-+		}
-+		if (irqtype & HOST_INT_INFO) {
-+			handle_info_irq(adev);
-+		}
-+		if (irqtype & HOST_INT_SCAN_COMPLETE) {
-+			log(L_IRQ, "got Scan_Complete IRQ\n");
-+			/* need to do that in process context */
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN);
-+			/* remember that fw is not scanning anymore */
-+			SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+		}
-+	}
-+
-+	/* These we just log, but either they happen rarely
-+	 * or we keep them masked out */
-+	if (irqtype & (0
-+		/* | HOST_INT_RX_DATA */
-+		/* | HOST_INT_TX_COMPLETE   */
-+		| HOST_INT_TX_XFER
-+		| HOST_INT_RX_COMPLETE
-+		| HOST_INT_DTIM
-+		| HOST_INT_BEACON
-+		| HOST_INT_TIMER
-+		| HOST_INT_KEY_NOT_FOUND
-+		| HOST_INT_IV_ICV_FAILURE
-+		/* | HOST_INT_CMD_COMPLETE  */
-+		/* | HOST_INT_INFO          */
-+		| HOST_INT_OVERFLOW
-+		| HOST_INT_PROCESS_ERROR
-+		/* | HOST_INT_SCAN_COMPLETE */
-+		| HOST_INT_FCS_THRESHOLD
-+		| HOST_INT_UNKNOWN
-+	)) {
-+		log_unusual_irq(irqtype);
-+	}
-+
-+#if IRQ_ITERATE
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	irqtype = unmasked & ~adev->irq_mask;
-+	/* Bail out if no new IRQ bits or if all are masked out */
-+	if (!irqtype)
-+		break;
-+
-+	if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) {
-+		printk(KERN_ERR "acx: too many interrupts per jiffy!\n");
-+		/* Looks like card floods us with IRQs! Try to stop that */
-+		write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+		/* This will short-circuit all future attempts to handle IRQ.
-+		 * We cant do much more... */
-+		adev->irq_mask = 0;
-+		break;
-+	}
-+}
-+#endif
-+	/* Routine to perform blink with range */
-+	if (unlikely(adev->led_power == 2))
-+		update_link_quality_led(adev);
-+
-+/* handled: */
-+	/* write_flush(adev); - not needed, last op was read anyway */
-+	acx_unlock(adev, flags);
-+	FN_EXIT0;
-+	return IRQ_HANDLED;
-+
-+none:
-+	acx_unlock(adev, flags);
-+	return IRQ_NONE;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_power_led
-+*/
-+void
-+acxmem_l_power_led(acx_device_t *adev, int enable)
-+{
-+	u16 gpio_pled =	IS_ACX111(adev) ? 0x0040 : 0x0800;
-+
-+	/* A hack. Not moving message rate limiting to adev->xxx
-+	 * (it's only a debug message after all) */
-+	static int rate_limit = 0;
-+
-+	if (rate_limit++ < 3)
-+		log(L_IOCTL, "Please report in case toggling the power "
-+				"LED doesn't work for your card!\n");
-+	if (enable)
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled);
-+	else
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled);
-+}
-+
-+
-+/***********************************************************************
-+** Ioctls
-+*/
-+
-+/***********************************************************************
-+*/
-+int
-+acx111pci_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+#if ACX_DEBUG > 1
-+	acx_device_t *adev = ndev2adev(ndev);
-+	rxdesc_t *rxdesc;
-+	txdesc_t *txdesc;
-+	rxhostdesc_t *rxhostdesc;
-+	txhostdesc_t *txhostdesc;
-+	struct acx111_ie_memoryconfig memconf;
-+	struct acx111_ie_queueconfig queueconf;
-+	unsigned long flags;
-+	int i;
-+	char memmap[0x34];
-+	char rxconfig[0x8];
-+	char fcserror[0x8];
-+	char ratefallback[0x5];
-+
-+	if ( !(acx_debug & (L_IOCTL|L_DEBUG)) )
-+		return OK;
-+	/* using printk() since we checked debug flag already */
-+
-+	acx_sem_lock(adev);
-+
-+	if (!IS_ACX111(adev)) {
-+		printk("acx111-specific function called "
-+			"with non-acx111 chip, aborting\n");
-+		goto end_ok;
-+	}
-+
-+	/* get Acx111 Memory Configuration */
-+	memset(&memconf, 0, sizeof(memconf));
-+	/* BTW, fails with 12 (Write only) error code.
-+	** Retained for easy testing of issue_cmd error handling :) */
-+	printk ("Interrogating queue config\n");
-+	acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG);
-+	printk ("done with queue config\n");
-+
-+	/* get Acx111 Queue Configuration */
-+	memset(&queueconf, 0, sizeof(queueconf));
-+	printk ("Interrogating mem config options\n");
-+	acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS);
-+	printk ("done with mem config options\n");
-+
-+	/* get Acx111 Memory Map */
-+	memset(memmap, 0, sizeof(memmap));
-+	printk ("Interrogating mem map\n");
-+	acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP);
-+	printk ("done with mem map\n");
-+
-+	/* get Acx111 Rx Config */
-+	memset(rxconfig, 0, sizeof(rxconfig));
-+	printk ("Interrogating rxconfig\n");
-+	acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG);
-+	printk ("done with queue rxconfig\n");
-+
-+	/* get Acx111 fcs error count */
-+	memset(fcserror, 0, sizeof(fcserror));
-+	printk ("Interrogating fcs err count\n");
-+	acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT);
-+	printk ("done with err count\n");
-+
-+	/* get Acx111 rate fallback */
-+	memset(ratefallback, 0, sizeof(ratefallback));
-+	printk ("Interrogating rate fallback\n");
-+	acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK);
-+	printk ("done with rate fallback\n");
-+
-+	/* force occurrence of a beacon interrupt */
-+	/* TODO: comment why is this necessary */
-+	write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON);
-+
-+	/* dump Acx111 Mem Configuration */
-+	printk("dump mem config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Number of stations: %1X\n"
-+		"Memory block size: %1X\n"
-+		"tx/rx memory block allocation: %1X\n"
-+		"count rx: %X / tx: %X queues\n"
-+		"options %1X\n"
-+		"fragmentation %1X\n"
-+		"Rx Queue 1 Count Descriptors: %X\n"
-+		"Rx Queue 1 Host Memory Start: %X\n"
-+		"Tx Queue 1 Count Descriptors: %X\n"
-+		"Tx Queue 1 Attributes: %X\n",
-+		memconf.len, (int) sizeof(memconf),
-+		memconf.no_of_stations,
-+		memconf.memory_block_size,
-+		memconf.tx_rx_memory_block_allocation,
-+		memconf.count_rx_queues, memconf.count_tx_queues,
-+		memconf.options,
-+		memconf.fragmentation,
-+		memconf.rx_queue1_count_descs,
-+	acx2cpu(memconf.rx_queue1_host_rx_start),
-+		memconf.tx_queue1_count_descs,
-+		memconf.tx_queue1_attributes);
-+
-+	/* dump Acx111 Queue Configuration */
-+	printk("dump queue head:\n"
-+		"data read: %d, struct size: %d\n"
-+		"tx_memory_block_address (from card): %X\n"
-+		"rx_memory_block_address (from card): %X\n"
-+		"rx1_queue address (from card): %X\n"
-+		"tx1_queue address (from card): %X\n"
-+		"tx1_queue attributes (from card): %X\n",
-+		queueconf.len, (int) sizeof(queueconf),
-+		queueconf.tx_memory_block_address,
-+		queueconf.rx_memory_block_address,
-+		queueconf.rx1_queue_address,
-+		queueconf.tx1_queue_address,
-+		queueconf.tx1_attributes);
-+
-+	/* dump Acx111 Mem Map */
-+	printk("dump mem map:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Code start: %X\n"
-+		"Code end: %X\n"
-+		"WEP default key start: %X\n"
-+		"WEP default key end: %X\n"
-+		"STA table start: %X\n"
-+		"STA table end: %X\n"
-+		"Packet template start: %X\n"
-+		"Packet template end: %X\n"
-+		"Queue memory start: %X\n"
-+		"Queue memory end: %X\n"
-+		"Packet memory pool start: %X\n"
-+		"Packet memory pool end: %X\n"
-+		"iobase: %p\n"
-+		"iobase2: %p\n",
-+		*((u16 *)&memmap[0x02]), (int) sizeof(memmap),
-+		*((u32 *)&memmap[0x04]),
-+		*((u32 *)&memmap[0x08]),
-+		*((u32 *)&memmap[0x0C]),
-+		*((u32 *)&memmap[0x10]),
-+		*((u32 *)&memmap[0x14]),
-+		*((u32 *)&memmap[0x18]),
-+		*((u32 *)&memmap[0x1C]),
-+		*((u32 *)&memmap[0x20]),
-+		*((u32 *)&memmap[0x24]),
-+		*((u32 *)&memmap[0x28]),
-+		*((u32 *)&memmap[0x2C]),
-+		*((u32 *)&memmap[0x30]),
-+		adev->iobase,
-+		adev->iobase2);
-+
-+	/* dump Acx111 Rx Config */
-+	printk("dump rx config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"rx config: %X\n"
-+		"rx filter config: %X\n",
-+		*((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig),
-+		*((u16 *)&rxconfig[0x04]),
-+		*((u16 *)&rxconfig[0x06]));
-+
-+	/* dump Acx111 fcs error */
-+	printk("dump fcserror:\n"
-+		"data read: %d, struct size: %d\n"
-+		"fcserrors: %X\n",
-+		*((u16 *)&fcserror[0x02]), (int) sizeof(fcserror),
-+		*((u32 *)&fcserror[0x04]));
-+
-+	/* dump Acx111 rate fallback */
-+	printk("dump rate fallback:\n"
-+		"data read: %d, struct size: %d\n"
-+		"ratefallback: %X\n",
-+		*((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback),
-+		*((u8 *)&ratefallback[0x04]));
-+
-+	/* protect against IRQ */
-+	acx_lock(adev, flags);
-+
-+	/* dump acx111 internal rx descriptor ring buffer */
-+	rxdesc = adev->rxdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump internal rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n"
-+			"RxStatus (dynamic) 0x%X\n"
-+			"Mod/Pre (dynamic) 0x%X\n",
-+			i,
-+			rxdesc,
-+			acx2cpu(rxdesc->pNextDesc),
-+			acx2cpu(rxdesc->ACXMemPtr),
-+			rxdesc->Ctl_8,
-+			rxdesc->rate,
-+			rxdesc->error,
-+			rxdesc->SNR);
-+		rxdesc++;
-+	}
-+
-+	/* dump host rx descriptor ring buffer */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxhostdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump host rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			rxhostdesc,
-+			acx2cpu(rxhostdesc->data_phy),
-+			rxhostdesc->data_offset,
-+			le16_to_cpu(rxhostdesc->Ctl_16),
-+			le16_to_cpu(rxhostdesc->length),
-+			acx2cpu(rxhostdesc->desc_phy_next),
-+			rxhostdesc->Status);
-+		rxhostdesc++;
-+	}
-+
-+	/* dump acx111 internal tx descriptor ring buffer */
-+	txdesc = adev->txdesc_start;
-+
-+	/* loop over complete transmit pool */
-+	if (txdesc) for (i = 0; i < TX_CNT; i++) {
-+		printk("\ndump internal txdesc %d:\n"
-+			"size 0x%X\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"host mem pointer (dynamic) 0x%X\n"
-+			"length (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"CTL2 (dynamic) 0x%X\n"
-+			"Status (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n",
-+			i,
-+			(int) sizeof(struct txdesc),
-+			txdesc,
-+			acx2cpu(txdesc->pNextDesc),
-+			acx2cpu(txdesc->AcxMemPtr),
-+			acx2cpu(txdesc->HostMemPtr),
-+			le16_to_cpu(txdesc->total_length),
-+			txdesc->Ctl_8,
-+			txdesc->Ctl2_8, txdesc->error,
-+			txdesc->u.r1.rate);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+
-+	/* dump host tx descriptor ring buffer */
-+
-+	txhostdesc = adev->txhostdesc_start;
-+
-+	/* loop over complete host send pool */
-+	if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) {
-+		printk("\ndump host txdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			txhostdesc,
-+			acx2cpu(txhostdesc->data_phy),
-+			txhostdesc->data_offset,
-+			le16_to_cpu(txhostdesc->Ctl_16),
-+			le16_to_cpu(txhostdesc->length),
-+			acx2cpu(txhostdesc->desc_phy_next),
-+			le32_to_cpu(txhostdesc->Status));
-+		txhostdesc++;
-+	}
-+
-+	/* write_reg16(adev, 0xb4, 0x4); */
-+
-+	acx_unlock(adev, flags);
-+end_ok:
-+
-+	acx_sem_unlock(adev);
-+#endif /* ACX_DEBUG */
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100mem_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	u16 gpio_old;
-+
-+	if (!IS_ACX100(adev)) {
-+		/* WARNING!!!
-+		 * Removing this check *might* damage
-+		 * hardware, since we're tweaking GPIOs here after all!!!
-+		 * You've been warned...
-+		 * WARNING!!! */
-+		printk("acx: sorry, setting bias level for non-acx100 "
-+			"is not supported yet\n");
-+		return OK;
-+	}
-+
-+	if (*extra > 7)	{
-+		printk("acx: invalid bias parameter, range is 0-7\n");
-+		return -EINVAL;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	/* Need to lock accesses to [IO_ACX_GPIO_OUT]:
-+	 * IRQ handler uses it to update LED */
-+	acx_lock(adev, flags);
-+	gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT);
-+	write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8));
-+	acx_unlock(adev, flags);
-+
-+	log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old);
-+	printk("%s: PHY power amplifier bias: old:%d, new:%d\n",
-+		ndev->name,
-+		(gpio_old & 0x0700) >> 8, (unsigned char)*extra);
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+/***************************************************************
-+** acxmem_l_alloc_tx
-+** Actually returns a txdesc_t* ptr
-+**
-+** FIXME: in case of fragments, should allocate multiple descrs
-+** after figuring out how many we need and whether we still have
-+** sufficiently many.
-+*/
-+tx_t*
-+acxmem_l_alloc_tx(acx_device_t *adev)
-+{
-+	struct txdesc *txdesc;
-+	unsigned head;
-+	u8 ctl8;
-+	static int txattempts = 0;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!adev->tx_free)) {
-+		printk("acx: BUG: no free txdesc left\n");
-+		/*
-+		 * Probably the ACX ignored a transmit attempt and now there's a packet
-+		 * sitting in the queue we think should be transmitting but the ACX doesn't
-+		 * know about.
-+		 * On the first pass, send the ACX a TxProc interrupt to try moving
-+		 * things along, and if that doesn't work (ie, we get called again) completely
-+		 * flush the transmit queue.
-+		 */
-+		if (txattempts < 10) {
-+		  txattempts++;
-+		  printk ("acx: trying to wake up ACX\n");
-+		  write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+		  write_flush(adev);		}
-+		else  {
-+		  txattempts = 0;
-+		  printk ("acx: flushing transmit queue.\n");
-+		  acxmem_l_clean_txdesc_emergency (adev);
-+		}
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/*
-+	 * Make a quick check to see if there is transmit buffer space on
-+	 * the ACX.  This can't guarantee there is enough space for the packet
-+	 * since we don't yet know how big it is, but it will prevent at least some
-+	 * annoyances.
-+	 */
-+	if (!adev->acx_txbuf_blocks_free) {
-+	  txdesc = NULL;
-+	  goto end;
-+	}
-+
-+	head = adev->tx_head;
-+	/*
-+	 * txdesc points to ACX memory
-+	 */
-+	txdesc = get_txdesc(adev, head);
-+	ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+
-+	/* 
-+	 * If we don't own the buffer (HOSTOWN) it is certainly not free; however,
-+	 * we may have previously thought we had enough memory to send
-+	 * a packet, allocated the buffer then gave up when we found not enough
-+	 * transmit buffer space on the ACX. In that case, HOSTOWN and
-+	 * ACXDONE will both be set.
-+	 */
-+	if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) {
-+		/* whoops, descr at current index is not free, so probably
-+		 * ring buffer already full */
-+                printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find "
-+                        "free txdesc\n", head, ctl8);
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/* Needed in case txdesc won't be eventually submitted for tx */
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN);
-+
-+	adev->tx_free--;
-+	log(L_BUFT, "tx: got desc %u, %u remain\n",
-+			head, adev->tx_free);
-+	/* Keep a few free descs between head and tail of tx ring.
-+	** It is not absolutely needed, just feels safer */
-+	if (adev->tx_free < TX_STOP_QUEUE) {
-+		log(L_BUF, "stop queue (%u tx desc left)\n",
-+				adev->tx_free);
-+		acx_stop_queue(adev->ndev, NULL);
-+	}
-+
-+	/* returning current descriptor, so advance to next free one */
-+	adev->tx_head = (head + 1) % TX_CNT;
-+end:
-+	FN_EXIT0;
-+
-+	return (tx_t*)txdesc;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_l_dealloc_tx
-+** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque);
-+ transmit descriptor.  The ACX
-+** can get confused if we skip transmit descriptors in the queue,
-+** so when we don't need a descriptor return it to its original
-+** state and move the queue head pointer back.
-+**
-+*/
-+void
-+acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque)
-+{
-+  /*
-+   * txdesc is the address of the descriptor on the ACX.
-+   */
-+  txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+  txdesc_t tmptxdesc;
-+  int index;
-+
-+  memset (&tmptxdesc, 0, sizeof(tmptxdesc));
-+  tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG;
-+  tmptxdesc.u.r1.rate = 0x0a;
-+
-+  /*
-+   * Clear out all of the transmit descriptor except for the next pointer
-+   */
-+  copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr),
-+		    (u8 *) &(tmptxdesc.HostMemPtr),
-+		    sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc));
-+  
-+  /*
-+   * This is only called immediately after we've allocated, so we should
-+   * be able to set the head back to this descriptor.
-+   */
-+  index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size;
-+  printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index);
-+  adev->tx_head = index;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void*
-+acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque)
-+{
-+	return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_tx_data
-+**
-+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx).
-+** Can be called from acx_i_start_xmit (data frames from net core).
-+**
-+** FIXME: in case of fragments, should loop over the number of
-+** pre-allocated tx descrs, properly setting up transfer data and
-+** CTL_xxx flags according to fragment number.
-+*/
-+void
-+acxmem_update_queue_indicator (acx_device_t *adev, int txqueue)
-+{
-+#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE
-+  u32 indicator;
-+  unsigned long flags;
-+  int count;
-+
-+  /*
-+   * Can't handle an interrupt while we're fiddling with the ACX's lock,
-+   * according to TI.  The ACX is supposed to hold fw_lock for at most
-+   * 500ns.
-+   */
-+  local_irq_save (flags);
-+
-+  /*
-+   * Wait for ACX to release the lock (at most 500ns).
-+   */
-+  count = 0;
-+  while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock))
-+	 && (count++ < 50)) {
-+    ndelay (10);
-+  }
-+  if (count < 50) {
-+
-+    /*
-+     * Take out the host lock - anything non-zero will work, so don't worry about
-+     * be/le
-+     */
-+    write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1);
-+
-+    /*
-+     * Avoid a race condition
-+     */
-+    count = 0;
-+    while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock))
-+	   && (count++ < 50)) {
-+      ndelay (10);
-+    }
-+
-+    if (count < 50) {
-+      /*
-+       * Mark the queue active
-+       */
-+      indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator));
-+      indicator |= cpu_to_le32 (1 << txqueue);
-+      write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator);
-+    }
-+
-+    /*
-+     * Release the host lock
-+     */
-+    write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0);
-+
-+  }
-+
-+  /*
-+   * Restore interrupts
-+   */
-+  local_irq_restore (flags);
-+#endif
-+}
-+
-+void
-+acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len)
-+{
-+  /*
-+   * txdesc is the address on the ACX
-+   */
-+	txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+	txhostdesc_t *hostdesc1, *hostdesc2;
-+	client_t *clt;
-+	u16 rate_cur;
-+	u8 Ctl_8, Ctl2_8;
-+	u32 addr;
-+
-+	FN_ENTER;
-+	/* fw doesn't tx such packets anyhow */
-+	if (unlikely(len < WLAN_HDR_A3_LEN))
-+		goto end;
-+
-+	hostdesc1 = get_txhostdesc(adev, txdesc);
-+	/* modify flag status in separate variable to be able to write it back
-+	 * in one big swoop later (also in order to have less device memory
-+	 * accesses) */
-+	Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+	Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */
-+
-+	hostdesc2 = hostdesc1 + 1;
-+
-+	/* DON'T simply set Ctl field to 0 here globally,
-+	 * it needs to maintain a consistent flag status (those are state flags!!),
-+	 * otherwise it may lead to severe disruption. Only set or reset particular
-+	 * flags at the exact moment this is needed... */
-+
-+	/* let chip do RTS/CTS handshaking before sending
-+	 * in case packet size exceeds threshold */
-+	if (len > adev->rts_threshold)
-+		SET_BIT(Ctl2_8, DESC_CTL2_RTS);
-+	else
-+		CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_3_AP:
-+		clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1);
-+		break;
-+	case ACX_MODE_2_STA:
-+		clt = adev->ap_client;
-+		break;
-+#if 0
-+/* testing was done on acx111: */
-+	case ACX_MODE_MONITOR:
-+		SET_BIT(Ctl2_8, 0
-+/* sends CTS to self before packet */
-+			+ DESC_CTL2_SEQ		/* don't increase sequence field */
-+/* not working (looks like good fcs is still added) */
-+			+ DESC_CTL2_FCS		/* don't add the FCS */
-+/* not tested */
-+			+ DESC_CTL2_MORE_FRAG
-+/* not tested */
-+			+ DESC_CTL2_RETRY	/* don't increase retry field */
-+/* not tested */
-+			+ DESC_CTL2_POWER	/* don't increase power mgmt. field */
-+/* no effect */
-+			+ DESC_CTL2_WEP		/* encrypt this frame */
-+/* not tested */
-+			+ DESC_CTL2_DUR		/* don't increase duration field */
-+			);
-+		/* fallthrough */
-+#endif
-+	default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */
-+		clt = NULL;
-+		break;
-+	}
-+
-+	rate_cur = clt ? clt->rate_cur : adev->rate_bcast;
-+	if (unlikely(!rate_cur)) {
-+		printk("acx: driver bug! bad ratemask\n");
-+		goto end;
-+	}
-+
-+	/* used in tx cleanup routine for auto rate and accounting: */
-+	put_txcr(adev, txdesc, clt, rate_cur);
-+
-+	write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len));
-+	hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN);
-+	if (IS_ACX111(adev)) {
-+		/* note that if !txdesc->do_auto, txrate->cur
-+		** has only one nonzero bit */
-+		txdesc->u.r2.rate111 = cpu_to_le16(
-+			rate_cur
-+			/* WARNING: I was never able to make it work with prism54 AP.
-+			** It was falling down to 1Mbit where shortpre is not applicable,
-+			** and not working at all at "5,11 basic rates only" setting.
-+			** I even didn't see tx packets in radio packet capture.
-+			** Disabled for now --vda */
-+			/*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */
-+			);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+			/* should add this to rate111 above as necessary */
-+			| (clt->pbcc511 ? RATE111_PBCC511 : 0)
-+#endif
-+		hostdesc1->length = cpu_to_le16(len);
-+	} else { /* ACX100 */
-+		u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100;
-+		write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+		if (clt->pbcc511) {
-+			if (n == RATE100_5 || n == RATE100_11)
-+				n |= RATE100_PBCC511;
-+		}
-+
-+		if (clt->shortpre && (clt->cur != RATE111_1))
-+			SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */
-+#endif
-+		/* set autodma and reclaim and 1st mpdu */
-+		SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG);
-+
-+#if ACX_FRAGMENTATION
-+		/* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */
-+#endif
-+		hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN);
-+
-+		/*
-+		 * Since we're not using autodma copy the packet data to the acx now.
-+		 * Even host descriptors point to the packet header, and the odd indexed
-+		 * descriptor following points to the packet data.
-+		 *
-+		 * The first step is to find free memory in the ACX transmit buffers.
-+		 * They don't necessarily map one to one with the transmit queue entries,
-+		 * so search through them starting just after the last one used.
-+		 */
-+		addr = allocate_acx_txbuf_space (adev, len);
-+		if (addr) {
-+		  chaincopy_to_slavemem (adev, addr, hostdesc1->data, len);
-+		}
-+		else {
-+		  /*
-+		   * Bummer.  We thought we might have enough room in the transmit
-+		   * buffers to send this packet, but it turns out we don't.  alloc_tx
-+		   * has already marked this transmit descriptor as HOSTOWN and ACXDONE,
-+		   * which means the ACX will hang when it gets to this descriptor unless
-+		   * we do something about it.  Having a bubble in the transmit queue just
-+		   * doesn't seem to work, so we have to reset this transmit queue entry's
-+		   * state to its original value and back up our head pointer to point
-+		   * back to this entry.
-+		   */
-+		  hostdesc1->length = 0;
-+		  hostdesc2->length = 0;
-+		  write_slavemem16 (adev, (u32) &(txdesc->total_length), 0);
-+		  write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG);
-+		  adev->tx_head  = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size;
-+		  goto end;
-+		}
-+		/*
-+		 * Tell the ACX where the packet is.
-+		 */
-+		write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr);
-+
-+	}
-+	/* don't need to clean ack/rts statistics here, already
-+	 * done on descr cleanup */
-+
-+	/* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors
-+	 * are now owned by the acx100; do this as LAST operation */
-+	CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN);
-+	/* flush writes before we release hostdesc to the adapter here */
-+	//wmb();
-+
-+	/* write back modified flags */
-+	/*
-+	 * At this point Ctl_8 should just be FIRSTFRAG
-+	 */
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8);
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8);
-+	/* unused: txdesc->tx_time = cpu_to_le32(jiffies); */
-+
-+	/*
-+	 * Update the queue indicator to say there's data on the first queue.
-+	 */
-+	acxmem_update_queue_indicator (adev, 0);
-+
-+	/* flush writes before we tell the adapter that it's its turn now */
-+	mmiowb();
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+	write_flush(adev);
-+
-+	/* log the packet content AFTER sending it,
-+	 * in order to not delay sending any further than absolutely needed
-+	 * Do separate logs for acx100/111 to have human-readable rates */
-+	if (unlikely(acx_debug & (L_XFER|L_DATA))) {
-+		u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc;
-+		if (IS_ACX111(adev))
-+			printk("tx: pkt (%s): len %d "
-+				"rate %04X%s status %u\n",
-+				acx_get_packet_type_string(le16_to_cpu(fc)), len,
-+				le16_to_cpu(txdesc->u.r2.rate111),
-+				(le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "",
-+				adev->status);
-+		else
-+			printk("tx: pkt (%s): len %d rate %03u%s status %u\n",
-+				acx_get_packet_type_string(fc), len,
-+				read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)),
-+				(Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "",
-+				adev->status);
-+
-+		if (acx_debug & L_DATA) {
-+			printk("tx: 802.11 [%d]: ", len);
-+			acx_dump_bytes(hostdesc1->data, len);
-+		}
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_clean_txdesc
-+**
-+** This function resets the txdescs' status when the ACX100
-+** signals the TX done IRQ (txdescs have been processed), starting with
-+** the pool index of the descriptor which we would use next,
-+** in order to make sure that we can be as fast as possible
-+** in filling new txdescs.
-+** Everytime we get called we know where the next packet to be cleaned is.
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_txbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_txbuffer(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+	u8 Ctl_8;
-+
-+	/* no FN_ENTER here, we don't want that */
-+	/* no locks here, since it's entirely non-critical code */
-+	txdesc = adev->txdesc_start;
-+	if (unlikely(!txdesc)) return;
-+	printk("tx: desc->Ctl8's:");
-+	for (i = 0; i < TX_CNT; i++) {
-+	  Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+		printk(" %02X", Ctl_8);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+	printk("\n");
-+}
-+#endif
-+
-+
-+static void
-+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger)
-+{
-+	const char *err = "unknown error";
-+
-+	/* hmm, should we handle this as a mask
-+	 * of *several* bits?
-+	 * For now I think only caring about
-+	 * individual bits is ok... */
-+	switch (error) {
-+	case 0x01:
-+		err = "no Tx due to error in other fragment";
-+		adev->wstats.discard.fragment++;
-+		break;
-+	case 0x02:
-+		err = "Tx aborted";
-+		adev->stats.tx_aborted_errors++;
-+		break;
-+	case 0x04:
-+		err = "Tx desc wrong parameters";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x08:
-+		err = "WEP key not found";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x10:
-+		err = "MSDU lifetime timeout? - try changing "
-+				"'iwconfig retry lifetime XXX'";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x20:
-+		err = "excessive Tx retries due to either distance "
-+			"too high or unable to Tx or Tx frame error - "
-+			"try changing 'iwconfig txpower XXX' or "
-+			"'sens'itivity or 'retry'";
-+		adev->wstats.discard.retries++;
-+		/* Tx error 0x20 also seems to occur on
-+		 * overheating, so I'm not sure whether we
-+		 * actually want to do aggressive radio recalibration,
-+		 * since people maybe won't notice then that their hardware
-+		 * is slowly getting cooked...
-+		 * Or is it still a safe long distance from utter
-+		 * radio non-functionality despite many radio recalibs
-+		 * to final destructive overheating of the hardware?
-+		 * In this case we really should do recalib here...
-+		 * I guess the only way to find out is to do a
-+		 * potentially fatal self-experiment :-\
-+		 * Or maybe only recalib in case we're using Tx
-+		 * rate auto (on errors switching to lower speed
-+		 * --> less heat?) or 802.11 power save mode?
-+		 *
-+		 * ok, just do it. */
-+		if (++adev->retry_errors_msg_ratelimit % 4 == 0) {
-+			if (adev->retry_errors_msg_ratelimit <= 20) {
-+				printk("%s: several excessive Tx "
-+					"retry errors occurred, attempting "
-+					"to recalibrate radio. Radio "
-+					"drift might be caused by increasing "
-+					"card temperature, please check the card "
-+					"before it's too late!\n",
-+					adev->ndev->name);
-+				if (adev->retry_errors_msg_ratelimit == 20)
-+					printk("disabling above message\n");
-+			}
-+
-+			acx_schedule_task(adev,	ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+		}
-+		break;
-+	case 0x40:
-+		err = "Tx buffer overflow";
-+		adev->stats.tx_fifo_errors++;
-+		break;
-+	case 0x80:
-+		err = "DMA error";
-+		adev->wstats.discard.misc++;
-+		break;
-+	}
-+	adev->stats.tx_errors++;
-+	if (adev->stats.tx_errors <= 20)
-+		printk("%s: tx error 0x%02X, buf %02u! (%s)\n",
-+				adev->ndev->name, error, finger, err);
-+	else
-+		printk("%s: tx error 0x%02X, buf %02u!\n",
-+				adev->ndev->name, error, finger);
-+}
-+
-+
-+unsigned int
-+acxmem_l_clean_txdesc(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	unsigned finger;
-+	int num_cleaned;
-+	u16 r111;
-+	u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8;
-+	u32 acxmem;
-+	txdesc_t tmptxdesc;
-+
-+	FN_ENTER;
-+
-+	/*
-+	 * Set up a template descriptor for re-initialization.  The only
-+	 * things that get set are Ctl_8 and the rate, and the rate defaults
-+	 * to 1Mbps.
-+	 */
-+	memset (&tmptxdesc, 0, sizeof (tmptxdesc));
-+	tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG;
-+	tmptxdesc.u.r1.rate = 0x0a;
-+
-+	if (unlikely(acx_debug & L_DEBUG))
-+		log_txbuffer(adev);
-+
-+	log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail);
-+
-+	/* We know first descr which is not free yet. We advance it as far
-+	** as we see correct bits set in following descs (if next desc
-+	** is NOT free, we shouldn't advance at all). We know that in
-+	** front of tx_tail may be "holes" with isolated free descs.
-+	** We will catch up when all intermediate descs will be freed also */
-+
-+	finger = adev->tx_tail;
-+	num_cleaned = 0;
-+	while (likely(finger != adev->tx_head)) {
-+		txdesc = get_txdesc(adev, finger);
-+
-+		/* If we allocated txdesc on tx path but then decided
-+		** to NOT use it, then it will be left as a free "bubble"
-+		** in the "allocated for tx" part of the ring.
-+		** We may meet it on the next ring pass here. */
-+
-+		/* stop if not marked as "tx finished" and "host owned" */
-+		Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+		if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN)
-+					!= DESC_CTL_ACXDONE_HOSTOWN) {
-+			if (unlikely(!num_cleaned)) { /* maybe remove completely */
-+				log(L_BUFT, "clean_txdesc: tail isn't free. "
-+					"tail:%d head:%d\n",
-+					adev->tx_tail, adev->tx_head);
-+			}
-+			break;
-+		}
-+
-+		/* remember desc values... */
-+		error = read_slavemem8 (adev, (u32) &(txdesc->error));
-+		ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures));
-+		rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures));
-+		rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok));
-+		r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate));
-+		r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111)));
-+
-+		/* need to check for certain error conditions before we
-+		 * clean the descriptor: we still need valid descr data here */
-+		if (unlikely(0x30 & error)) {
-+			/* only send IWEVTXDROP in case of retry or lifetime exceeded;
-+			 * all other errors mean we screwed up locally */
-+			union iwreq_data wrqu;
-+			wlan_hdr_t *hdr;
-+			txhostdesc_t *hostdesc;
-+
-+			hostdesc = get_txhostdesc(adev, txdesc);
-+			hdr = (wlan_hdr_t *)hostdesc->data;
-+			MAC_COPY(wrqu.addr.sa_data, hdr->a1);
-+			wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL);
-+		}
-+
-+		/*
-+		 * Free up the transmit data buffers
-+		 */
-+		acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+		if (acxmem) {
-+		  reclaim_acx_txbuf_space (adev, acxmem);
-+		}
-+
-+		/* ...and free the desc by clearing all the fields 
-+		   except the next pointer */
-+		copy_to_slavemem (adev,
-+				  (u32) &(txdesc->HostMemPtr), 
-+				  (u8 *) &(tmptxdesc.HostMemPtr),
-+				  sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)
-+				  );
-+
-+		adev->tx_free++;
-+		num_cleaned++;
-+
-+		if ((adev->tx_free >= TX_START_QUEUE)
-+		 && (adev->status == ACX_STATUS_4_ASSOCIATED)
-+		 && (acx_queue_stopped(adev->ndev))
-+		) {
-+			log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n",
-+					adev->tx_free);
-+			acx_wake_queue(adev->ndev, NULL);
-+		}
-+
-+		/* do error checking, rate handling and logging
-+		 * AFTER having done the work, it's faster */
-+
-+		/* do rate handling */
-+		if (adev->rate_auto) {
-+			struct client *clt = get_txc(adev, txdesc);
-+			if (clt) {
-+				u16 cur = get_txr(adev, txdesc);
-+				if (clt->rate_cur == cur) {
-+					acx_l_handle_txrate_auto(adev, clt,
-+						cur, /* intended rate */
-+						r100, r111, /* actually used rate */
-+						(error & 0x30), /* was there an error? */
-+						TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free);
-+				}
-+			}
-+		}
-+
-+		if (unlikely(error))
-+			handle_tx_error(adev, error, finger);
-+
-+		if (IS_ACX111(adev))
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n",
-+				finger, ack_failures, rts_failures, rts_ok, r111);
-+		else
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n",
-+				finger, ack_failures, rts_failures, rts_ok, r100);
-+
-+		/* update pointer for descr to be cleaned next */
-+		finger = (finger + 1) % TX_CNT;
-+	}
-+
-+	/* remember last position */
-+	adev->tx_tail = finger;
-+/* end: */
-+	FN_EXIT1(num_cleaned);
-+	return num_cleaned;
-+}
-+
-+/* clean *all* Tx descriptors, and regardless of their previous state.
-+ * Used for brute-force reset handling. */
-+void
-+acxmem_l_clean_txdesc_emergency(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+	u32 acxmem;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < TX_CNT; i++) {
-+		txdesc = get_txdesc(adev, i);
-+
-+		/* free it */
-+		write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->error), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN);
-+
-+		/*
-+		 * Clean up the memory allocated on the ACX for this transmit descriptor.
-+		 */
-+		acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+		if (acxmem) {
-+		  reclaim_acx_txbuf_space (adev, acxmem);
-+		}		
-+		
-+		write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0);
-+	}
-+
-+	adev->tx_free = TX_CNT;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_create_tx_host_desc_queue
-+*/
-+
-+static void*
-+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg)
-+{
-+	void *ptr;
-+        ptr = kmalloc (size, GFP_KERNEL);
-+	/*
-+	 * The ACX can't use the physical address, so we'll have to fake it
-+	 * later and it might be handy to have the virtual address.
-+	 */
-+	*phy = (dma_addr_t) NULL;
-+
-+	if (ptr) {
-+		log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n",
-+				msg, (int)size, ptr, (unsigned long long)*phy);
-+		memset(ptr, 0, size);
-+		return ptr;
-+	}
-+	printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n",
-+					msg, (int)size);
-+	return NULL;
-+}
-+
-+
-+/*
-+ * In the generic slave memory access mode, most of the stuff in
-+ * the txhostdesc_t is unused.  It's only here because the rest of
-+ * the ACX driver expects it to be since the PCI version uses indirect
-+ * host memory organization with DMA.  Since we're not using DMA the
-+ * only use we have for the host descriptors is to store the packets
-+ * on the way out.
-+ */
-+static int
-+acxmem_s_create_tx_host_desc_queue(acx_device_t *adev)
-+{
-+	txhostdesc_t *hostdesc;
-+	u8 *txbuf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate TX buffer */
-+	adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS;
-+
-+	adev->txbuf_start = allocate(adev, adev->txbuf_area_size,
-+				     &adev->txbuf_startphy, "txbuf_start");
-+	if (!adev->txbuf_start)
-+	  goto fail;
-+
-+	/* allocate the TX host descriptor queue pool */
-+	adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc);
-+
-+	adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size,
-+					  &adev->txhostdesc_startphy, "txhostdesc_start");
-+	if (!adev->txhostdesc_start)
-+	  goto fail;
-+
-+	/* check for proper alignment of TX host descriptor pool */
-+	if ((long) adev->txhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	hostdesc = adev->txhostdesc_start;
-+	txbuf = adev->txbuf_start;
-+
-+#if 0
-+/* Each tx buffer is accessed by hardware via
-+** txdesc -> txhostdesc(s) -> txbuffer(s).
-+** We use only one txhostdesc per txdesc, but it looks like
-+** acx111 is buggy: it accesses second txhostdesc
-+** (via hostdesc.desc_phy_next field) even if
-+** txdesc->length == hostdesc->length and thus
-+** entire packet was placed into first txhostdesc.
-+** Due to this bug acx111 hangs unless second txhostdesc
-+** has le16_to_cpu(hostdesc.length) = 3 (or larger)
-+** Storing NULL into hostdesc.desc_phy_next
-+** doesn't seem to help.
-+**
-+** Update: although it worked on Xterasys XN-2522g
-+** with len=3 trick, WG311v2 is even more bogus, doesn't work.
-+** Keeping this code (#ifdef'ed out) for documentational purposes.
-+*/
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		hostdesc_phy += sizeof(*hostdesc);
-+		if (!(i & 1)) {
-+			hostdesc->data_phy = cpu2acx(txbuf_phy);
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN);
-+			/* hostdesc->length = ... */
-+			hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+			hostdesc->pNext = ptr2acx(NULL);
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			hostdesc->data = txbuf;
-+
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS;
-+			txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS;
-+		} else {
-+			/* hostdesc->data_phy = ... */
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			/* hostdesc->Ctl_16 = ... */
-+			hostdesc->length = cpu_to_le16(3); /* bug workaround */
-+			/* hostdesc->desc_phy_next = ... */
-+			/* hostdesc->pNext = ... */
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			/* hostdesc->data = ... */
-+		}
-+		hostdesc++;
-+	}
-+#endif
-+/* We initialize two hostdescs so that they point to adjacent
-+** memory areas. Thus txbuf is really just a contiguous memory area */
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		/* ->data is a non-hardware field: */
-+		hostdesc->data = txbuf;
-+
-+		if (!(i & 1)) {
-+			txbuf += WLAN_HDR_A3_LEN;
-+		} else {
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN;
-+		}
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_tx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_create_rx_host_desc_queue
-+*/
-+/* the whole size of a data buffer (header plus data body)
-+ * plus 32 bytes safety offset at the end */
-+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32)
-+
-+static int
-+acxmem_s_create_rx_host_desc_queue(acx_device_t *adev)
-+{
-+	rxhostdesc_t *hostdesc;
-+	rxbuffer_t *rxbuf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate the RX host descriptor queue pool */
-+	adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc);
-+
-+	adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size,
-+					  &adev->rxhostdesc_startphy, "rxhostdesc_start");
-+	if (!adev->rxhostdesc_start)
-+	  goto fail;
-+
-+	/* check for proper alignment of RX host descriptor pool */
-+	if ((long) adev->rxhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	/* allocate Rx buffer pool which will be used by the acx
-+	 * to store the whole content of the received frames in it */
-+	adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE;
-+
-+	adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size,
-+				     &adev->rxbuf_startphy, "rxbuf_start");
-+	if (!adev->rxbuf_start)
-+	  goto fail;
-+
-+	rxbuf = adev->rxbuf_start;
-+	hostdesc = adev->rxhostdesc_start;
-+
-+	/* don't make any popular C programming pointer arithmetic mistakes
-+	 * here, otherwise I'll kill you...
-+	 * (and don't dare asking me why I'm warning you about that...) */
-+	for (i = 0; i < RX_CNT; i++) {
-+		hostdesc->data = rxbuf;
-+		hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE);
-+		rxbuf++;
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_rx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_create_hostdesc_queues
-+*/
-+int
-+acxmem_s_create_hostdesc_queues(acx_device_t *adev)
-+{
-+	int result;
-+	result = acxmem_s_create_tx_host_desc_queue(adev);
-+	if (OK != result) return result;
-+	result = acxmem_s_create_rx_host_desc_queue(adev);
-+	return result;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_tx_desc_queue
-+*/
-+static void
-+acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start)
-+{
-+	txdesc_t *txdesc;
-+	u32 clr;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	if (IS_ACX100(adev))
-+		adev->txdesc_size = sizeof(*txdesc);
-+	else
-+		/* the acx111 txdesc is 4 bytes larger */
-+		adev->txdesc_size = sizeof(*txdesc) + 4;
-+
-+	/*
-+	 * This refers to an ACX address, not one of ours
-+	 */
-+	adev->txdesc_start = (txdesc_t *) tx_queue_start;
-+
-+	log(L_DEBUG, "adev->txdesc_start=%p\n",
-+			adev->txdesc_start);
-+
-+	adev->tx_free = TX_CNT;
-+	/* done by memset: adev->tx_head = 0; */
-+	/* done by memset: adev->tx_tail = 0; */
-+	txdesc = adev->txdesc_start;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111 has a preinitialized Tx buffer! */
-+		/* loop over whole send pool */
-+		/* FIXME: do we have to do the hostmemptr stuff here?? */
-+		for (i = 0; i < TX_CNT; i++) {
-+			txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+			/* reserve two (hdr desc and payload desc) */
-+			txdesc = advance_txdesc(adev, txdesc, 1);
-+		}
-+	} else {
-+		/* ACX100 Tx buffer needs to be initialized by us */
-+		/* clear whole send pool. sizeof is safe here (we are acx100) */
-+
-+		/*
-+		 * adev->txdesc_start refers to device memory, so we can't write
-+		 * directly to it.
-+		 */
-+		clr = (u32) adev->txdesc_start;
-+		while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) {
-+		  write_slavemem32 (adev, clr, 0);
-+		  clr += 4;
-+		}
-+
-+		/* loop over whole send pool */
-+		for (i = 0; i < TX_CNT; i++) {
-+			log(L_DEBUG, "configure card tx descriptor: 0x%p, "
-+				"size: 0x%X\n", txdesc, adev->txdesc_size);
-+
-+			/* initialise ctl */
-+			/*
-+			 * No auto DMA here
-+			 */
-+			write_slavemem8 (adev, (u32) &(txdesc->Ctl_8),
-+					(u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG));
-+			/* done by memset(0): txdesc->Ctl2_8 = 0; */
-+
-+			/* point to next txdesc */
-+			write_slavemem32 (adev, (u32) &(txdesc->pNextDesc),
-+					  (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size));
-+
-+			/* go to the next one */
-+			/* ++ is safe here (we are acx100) */
-+			txdesc++;
-+		}
-+		/* go back to the last one */
-+		txdesc--;
-+		/* and point to the first making it a ring buffer */
-+		write_slavemem32 (adev, (u32) &(txdesc->pNextDesc),
-+				  (u32) cpu_to_le32 (tx_queue_start));
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_rx_desc_queue
-+*/
-+static void
-+acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start)
-+{
-+	rxdesc_t *rxdesc;
-+	u32 mem_offs;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* done by memset: adev->rx_tail = 0; */
-+
-+	/* ACX111 doesn't need any further config: preconfigures itself.
-+	 * Simply print ring buffer for debugging */
-+	if (IS_ACX111(adev)) {
-+		/* rxdesc_start already set here */
-+
-+		adev->rxdesc_start = (rxdesc_t *) rx_queue_start;
-+
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc);
-+			rxdesc = adev->rxdesc_start = (rxdesc_t *)
-+			  acx2cpu(rxdesc->pNextDesc);
-+		}
-+	} else {
-+		/* we didn't pre-calculate rxdesc_start in case of ACX100 */
-+		/* rxdesc_start should be right AFTER Tx pool */
-+		adev->rxdesc_start = (rxdesc_t *)
-+			((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t)));
-+		/* NB: sizeof(txdesc_t) above is valid because we know
-+		** we are in if (acx100) block. Beware of cut-n-pasting elsewhere!
-+		** acx111's txdesc is larger! */
-+
-+		mem_offs = (u32) adev->rxdesc_start;
-+		while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) {
-+		  write_slavemem32 (adev, mem_offs, 0);
-+		  mem_offs += 4;
-+		}
-+
-+		/* loop over whole receive pool */
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc);
-+			/* point to next rxdesc */
-+			write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc),
-+					  (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc)));
-+			/* go to the next one */
-+			rxdesc++;
-+		}
-+		/* go to the last one */
-+		rxdesc--;
-+
-+		/* and point to the first making it a ring buffer */
-+		write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc),
-+				  (u32) cpu_to_le32 (rx_queue_start));
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_desc_queues
-+*/
-+void
-+acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start)
-+{
-+  u32 *p;
-+  int i;
-+
-+	acxmem_create_tx_desc_queue(adev, tx_queue_start);
-+	acxmem_create_rx_desc_queue(adev, rx_queue_start);
-+	p = (u32 *) adev->acx_queue_indicator;
-+	for (i = 0; i < 4; i++) {
-+	  write_slavemem32 (adev, (u32) p, 0);
-+	  p++;
-+	}
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_proc_diag_output
-+*/
-+char*
-+acxmem_s_proc_diag_output(char *p, acx_device_t *adev)
-+{
-+	const char *rtl, *thd, *ttl;
-+	txdesc_t *txdesc;
-+	u8 Ctl_8;
-+	rxdesc_t *rxdesc;
-+	int i;
-+	u32 tmp;
-+	txdesc_t txd;
-+	u8 buf[0x200];
-+	int j, k;
-+
-+	FN_ENTER;
-+
-+#if DUMP_MEM_DURING_DIAG > 0
-+	dump_acxmem (adev, 0, 0x10000);
-+	panic ("dump finished");
-+#endif
-+	
-+	p += sprintf(p, "** Rx buf **\n");
-+	rxdesc = adev->rxdesc_start;
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		rtl = (i == adev->rx_tail) ? " [tail]" : "";
-+		Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+		if (Ctl_8 & DESC_CTL_HOSTOWN)
-+			p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl);
-+		else
-+			p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl);
-+		rxdesc++;
-+	}
-+	p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free,
-+				acx_queue_stopped(adev->ndev) ? "STOPPED" : "running");
-+	
-+	p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n",
-+		     adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free);
-+	txdesc = adev->txdesc_start;
-+	if (txdesc) {
-+	  for (i = 0; i < TX_CNT; i++) {
-+	    thd = (i == adev->tx_head) ? " [head]" : "";
-+	    ttl = (i == adev->tx_tail) ? " [tail]" : "";
-+	    copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd));
-+	    Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+	    if (Ctl_8 & DESC_CTL_ACXDONE)
-+	      p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    else if (Ctl_8 & DESC_CTL_HOSTOWN)
-+	      p += sprintf(p, "%02u available     (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    else
-+	      p += sprintf(p, "%02u busy          (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+	    if (tmp) {
-+	      p += sprintf (p, " %04x", tmp);
-+	      while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) {
-+		tmp <<= 5;
-+		p += sprintf (p, " %04x", tmp);
-+	      }
-+	    }
-+	    p += sprintf (p, "\n");
-+	    p += sprintf (p, "  %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n"
-+			     "%02x %02x %02x %02x %04x\n",
-+			  (u32) txdesc,
-+			  txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time,
-+			  txd.total_length, txd.Reserved,
-+			  txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3],
-+			  txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures,
-+			  txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl,
-+			  txd.queue_info
-+			  );
-+	    if (txd.AcxMemPtr.v) {
-+	      copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf));
-+	      for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) {
-+		p += sprintf (p, "    ");
-+		for (k = 0; (k < 16) && (j+k < txd.total_length); k++) {
-+		  p += sprintf (p, " %02x", buf[j+k+4]);
-+		}
-+		p += sprintf (p, "\n");
-+	      }
-+	    }
-+	    txdesc = advance_txdesc(adev, txdesc, 1);
-+	  }
-+	}
-+	
-+	p += sprintf(p,
-+		"\n"
-+		"** Generic slave data **\n"
-+                "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n"
-+		"txbuf_start 0x%p, txbuf_area_size %u\n"
-+		"txdesc_size %u, txdesc_start 0x%p\n"
-+		"txhostdesc_start 0x%p, txhostdesc_area_size %u\n"
-+		"txbuf start 0x%04x, txbuf size %d\n"
-+		"rxdesc_start 0x%p\n"
-+		"rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n"
-+		"rxbuf_start 0x%p, rxbuf_area_size %u\n",
-+		adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES),
-+		adev->txbuf_start, adev->txbuf_area_size,
-+		adev->txdesc_size, adev->txdesc_start,
-+		adev->txhostdesc_start, adev->txhostdesc_area_size,
-+                adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize,
-+		adev->rxdesc_start,
-+		adev->rxhostdesc_start, adev->rxhostdesc_area_size,
-+		adev->rxbuf_start, adev->rxbuf_area_size);
-+	FN_EXIT0;
-+	return p;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxmem_proc_eeprom_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < 0x400; i++) {
-+		acxmem_read_eeprom_byte(adev, i, p++);
-+	}
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acxmem_set_interrupt_mask(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev)) {
-+		adev->irq_mask = (u16) ~(0
-+				| HOST_INT_RX_DATA       
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				/* | HOST_INT_RX_COMPLETE    */
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				| HOST_INT_IV_ICV_FAILURE
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				| HOST_INT_OVERFLOW    
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				| HOST_INT_FCS_THRESHOLD
-+				| HOST_INT_UNKNOWN
-+				);
-+		/* Or else acx100 won't signal cmd completion, right? */
-+		adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */
-+	} else {
-+		adev->irq_mask = (u16) ~(0
-+				| HOST_INT_RX_DATA 
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				/* | HOST_INT_RX_COMPLETE    */
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				/* | HOST_INT_IV_ICV_FAILURE */
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				/* | HOST_INT_OVERFLOW       */
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				/* | HOST_INT_FCS_THRESHOLD  */
-+				/* | HOST_INT_BEACON_MISSED        */
-+				);
-+		adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	struct acx111_ie_tx_level tx_level;
-+
-+	/* since it can be assumed that at least the Maxim radio has a
-+	 * maximum power output of 20dBm and since it also can be
-+	 * assumed that these values drive the DAC responsible for
-+	 * setting the linear Tx level, I'd guess that these values
-+	 * should be the corresponding linear values for a dBm value,
-+	 * in other words: calculate the values from that formula:
-+	 * Y [dBm] = 10 * log (X [mW])
-+	 * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm)
-+	 * and you're done...
-+	 * Hopefully that's ok, but you never know if we're actually
-+	 * right... (especially since Windows XP doesn't seem to show
-+	 * actual Tx dBm values :-P) */
-+
-+	/* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the
-+	 * values are EXACTLY mW!!! Not sure about RFMD and others,
-+	 * though... */
-+	static const u8 dbm2val_maxim[21] = {
-+		63, 63, 63, 62,
-+		61, 61, 60, 60,
-+		59, 58, 57, 55,
-+		53, 50, 47, 43,
-+		38, 31, 23, 13,
-+		0
-+	};
-+	static const u8 dbm2val_rfmd[21] = {
-+		 0,  0,  0,  1,
-+		 2,  2,  3,  3,
-+		 4,  5,  6,  8,
-+		10, 13, 16, 20,
-+		25, 32, 41, 50,
-+		63
-+	};
-+	const u8 *table;
-+
-+	switch (adev->radio_type) {
-+	case RADIO_MAXIM_0D:
-+		table = &dbm2val_maxim[0];
-+		break;
-+	case RADIO_RFMD_11:
-+	case RADIO_RALINK_15:
-+		table = &dbm2val_rfmd[0];
-+		break;
-+	default:
-+		printk("%s: unknown/unsupported radio type, "
-+			"cannot modify tx power level yet!\n",
-+				adev->ndev->name);
-+		return NOT_OK;
-+	}
-+	/*
-+	 * The hx4700 EEPROM, at least, only supports 1 power setting.  The configure
-+	 * routine matches the PA bias with the gain, so just use its default value.
-+	 * The values are: 0x2b for the gain and 0x03 for the PA bias.  The firmware
-+	 * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim
-+	 * radio's PA bias register.  The firmware limits itself to 0 - 64 when writing to the
-+	 * gain control DAC.
-+	 *
-+	 * Physically between the ACX and the radio, higher Tx gain control DAC values result
-+	 * in less power output; 0 volts to the Maxim radio results in the highest output power
-+	 * level, which I'm assuming matches up with 0 in the Tx Gain DAC register.
-+	 *
-+	 * Although there is only the 1 power setting, one of the radio firmware functions adjusts
-+	 * the transmit power level up and down.  That function is called by the ACX FIQ handler
-+	 * under certain conditions.
-+	 */
-+	tx_level.level = 1;
-+	//return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL);
-+
-+	printk("%s: changing radio power level to %u dBm (%u)\n",
-+			adev->ndev->name, level_dbm, table[level_dbm]);
-+	acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]);
-+
-+	return 0;
-+}
-+
-+
-+static struct platform_driver
-+acxmem_drv_id = {
-+	.driver	     = {
-+		.name = "acx-mem",
-+	},
-+	.probe       = acxmem_e_probe,
-+	.remove      = __devexit_p(acxmem_e_remove),
-+#ifdef CONFIG_PM
-+	.suspend     = acxmem_e_suspend,
-+	.resume      = acxmem_e_resume
-+#endif /* CONFIG_PM */
-+};
-+
-+
-+/***********************************************************************
-+** acxmem_e_init_module
-+**
-+** Module initialization routine, called once at module load time
-+*/
-+int __init
-+acxmem_e_init_module(void)
-+{
-+	int res;
-+
-+	FN_ENTER;
-+
-+#if (ACX_IO_WIDTH==32)
-+	printk("acx: compiled to use 32bit I/O access. "
-+		"I/O timing issues might occur, such as "
-+		"non-working firmware upload. Report them\n");
-+#else
-+	printk("acx: compiled to use 16bit I/O access only "
-+		"(compatibility mode)\n");
-+#endif
-+
-+#ifdef __LITTLE_ENDIAN
-+#define ENDIANNESS_STRING "running on a little-endian CPU\n"
-+#else
-+#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n"
-+#endif
-+	log(L_INIT,
-+		ENDIANNESS_STRING
-+		"PCI module " ACX_RELEASE " initialized, "
-+		"waiting for cards to probe...\n"
-+	);
-+
-+	res = platform_driver_register (&acxmem_drv_id);
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_cleanup_module
-+**
-+** Called at module unload time. This is our last chance to
-+** clean up after ourselves.
-+*/
-+void __exit
-+acxmem_e_cleanup_module(void)
-+{
-+	FN_ENTER;
-+
-+	printk ("cleanup_module\n");
-+    	platform_driver_unregister( &acxmem_drv_id );
-+
-+	FN_EXIT0;
-+}
-+
-+void acxmem_e_release(struct device *dev) {
-+}
-+
-+MODULE_AUTHOR( "Todd Blumer <todd@sdgsystems.com>" );
-+MODULE_DESCRIPTION( "ACX Slave Memory Driver" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/pci.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/pci.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,4234 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+#define ACX_PCI 1
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+
-+/* Linux 2.6.18+ uses <linux/utsrelease.h> */
-+#ifndef UTS_RELEASE
-+#include <linux/utsrelease.h>
-+#endif
-+
-+#include <linux/compiler.h> /* required for Lx 2.6.8 ?? */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/skbuff.h>
-+#include <linux/slab.h>
-+#include <linux/if_arp.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+#include <linux/netdevice.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/pm.h>
-+#include <linux/vmalloc.h>
-+#include <linux/dma-mapping.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+#define PCI_TYPE		(PCI_USES_MEM | PCI_ADDR0 | PCI_NO_ACPI_WAKE)
-+#define PCI_ACX100_REGION1		0x01
-+#define PCI_ACX100_REGION1_SIZE		0x1000	/* Memory size - 4K bytes */
-+#define PCI_ACX100_REGION2		0x02
-+#define PCI_ACX100_REGION2_SIZE		0x10000 /* Memory size - 64K bytes */
-+
-+#define PCI_ACX111_REGION1		0x00
-+#define PCI_ACX111_REGION1_SIZE		0x2000	/* Memory size - 8K bytes */
-+#define PCI_ACX111_REGION2		0x01
-+#define PCI_ACX111_REGION2_SIZE		0x20000 /* Memory size - 128K bytes */
-+
-+/* Texas Instruments Vendor ID */
-+#define PCI_VENDOR_ID_TI		0x104c
-+
-+/* ACX100 22Mb/s WLAN controller */
-+#define PCI_DEVICE_ID_TI_TNETW1100A	0x8400
-+#define PCI_DEVICE_ID_TI_TNETW1100B	0x8401
-+
-+/* ACX111 54Mb/s WLAN controller */
-+#define PCI_DEVICE_ID_TI_TNETW1130	0x9066
-+
-+/* PCI Class & Sub-Class code, Network-'Other controller' */
-+#define PCI_CLASS_NETWORK_OTHERS	0x0280
-+
-+#define CARD_EEPROM_ID_SIZE 6
-+
-+#ifndef PCI_D0
-+/* From include/linux/pci.h */
-+#define PCI_D0		0
-+#define PCI_D1		1
-+#define PCI_D2		2
-+#define PCI_D3hot	3
-+#define PCI_D3cold	4
-+#define PCI_UNKNOWN	5
-+#define PCI_POWER_ERROR	-1
-+#endif
-+
-+
-+/***********************************************************************
-+*/
-+static void acxpci_i_tx_timeout(struct net_device *ndev);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id);
-+#else
-+static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+#endif
-+static void acxpci_i_set_multicast_list(struct net_device *ndev);
-+
-+static int acxpci_e_open(struct net_device *ndev);
-+static int acxpci_e_close(struct net_device *ndev);
-+static void acxpci_s_up(struct net_device *ndev);
-+static void acxpci_s_down(struct net_device *ndev);
-+
-+
-+/***********************************************************************
-+** Register access
-+*/
-+
-+/* Pick one */
-+/* #define INLINE_IO static */
-+#define INLINE_IO static inline
-+
-+INLINE_IO u32
-+read_reg32(acx_device_t *adev, unsigned int offset)
-+{
-+#if ACX_IO_WIDTH == 32
-+	return readl((u8 *)adev->iobase + adev->io[offset]);
-+#else
-+	return readw((u8 *)adev->iobase + adev->io[offset])
-+	    + (readw((u8 *)adev->iobase + adev->io[offset] + 2) << 16);
-+#endif
-+}
-+
-+INLINE_IO u16
-+read_reg16(acx_device_t *adev, unsigned int offset)
-+{
-+	return readw((u8 *)adev->iobase + adev->io[offset]);
-+}
-+
-+INLINE_IO u8
-+read_reg8(acx_device_t *adev, unsigned int offset)
-+{
-+	return readb((u8 *)adev->iobase + adev->io[offset]);
-+}
-+
-+INLINE_IO void
-+write_reg32(acx_device_t *adev, unsigned int offset, u32 val)
-+{
-+#if ACX_IO_WIDTH == 32
-+	writel(val, (u8 *)adev->iobase + adev->io[offset]);
-+#else
-+	writew(val & 0xffff, (u8 *)adev->iobase + adev->io[offset]);
-+	writew(val >> 16, (u8 *)adev->iobase + adev->io[offset] + 2);
-+#endif
-+}
-+
-+INLINE_IO void
-+write_reg16(acx_device_t *adev, unsigned int offset, u16 val)
-+{
-+	writew(val, (u8 *)adev->iobase + adev->io[offset]);
-+}
-+
-+INLINE_IO void
-+write_reg8(acx_device_t *adev, unsigned int offset, u8 val)
-+{
-+	writeb(val, (u8 *)adev->iobase + adev->io[offset]);
-+}
-+
-+/* Handle PCI posting properly:
-+ * Make sure that writes reach the adapter in case they require to be executed
-+ * *before* the next write, by reading a random (and safely accessible) register.
-+ * This call has to be made if there is no read following (which would flush the data
-+ * to the adapter), yet the written data has to reach the adapter immediately. */
-+INLINE_IO void
-+write_flush(acx_device_t *adev)
-+{
-+	/* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */
-+	/* faster version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should also be safe): */
-+	readb(adev->iobase);
-+}
-+
-+INLINE_IO int
-+adev_present(acx_device_t *adev)
-+{
-+	/* fast version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should be safe): */
-+	return readl(adev->iobase) != 0xffffffff;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static inline txdesc_t*
-+get_txdesc(acx_device_t *adev, int index)
-+{
-+	return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size);
-+}
-+
-+static inline txdesc_t*
-+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc)
-+{
-+	return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size);
-+}
-+
-+static txhostdesc_t*
-+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return &adev->txhostdesc_start[index*2];
-+}
-+
-+static inline client_t*
-+get_txc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return adev->txc[index];
-+}
-+
-+static inline u16
-+get_txr(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	index /= adev->txdesc_size;
-+	return adev->txr[index];
-+}
-+
-+static inline void
-+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	adev->txc[index] = c;
-+	adev->txr[index] = r111;
-+}
-+
-+
-+/***********************************************************************
-+** EEPROM and PHY read/write helpers
-+*/
-+/***********************************************************************
-+** acxpci_read_eeprom_byte
-+**
-+** Function called to read an octet in the EEPROM.
-+**
-+** This function is used by acxpci_e_probe to check if the
-+** connected card is a legal one or not.
-+**
-+** Arguments:
-+**	adev		ptr to acx_device structure
-+**	addr		address to read in the EEPROM
-+**	charbuf		ptr to a char. This is where the read octet
-+**			will be stored
-+*/
-+int
-+acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf)
-+{
-+	int result;
-+	int count;
-+
-+	write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+	write_reg32(adev, IO_ACX_EEPROM_ADDR, addr);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for EEPROM read\n",
-+							adev->ndev->name);
-+			result = NOT_OK;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	*charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA);
-+	log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf);
-+	result = OK;
-+
-+fail:
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** We don't lock hw accesses here since we never r/w eeprom in IRQ
-+** Note: this function sleeps only because of GFP_KERNEL alloc
-+*/
-+#ifdef UNUSED
-+int
-+acxpci_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf)
-+{
-+	u8 *data_verify = NULL;
-+	unsigned long flags;
-+	int count, i;
-+	int result = NOT_OK;
-+	u16 gpio_orig;
-+
-+	printk("acx: WARNING! I would write to EEPROM now. "
-+		"Since I really DON'T want to unless you know "
-+		"what you're doing (THIS CODE WILL PROBABLY "
-+		"NOT WORK YET!), I will abort that now. And "
-+		"definitely make sure to make a "
-+		"/proc/driver/acx_wlan0_eeprom backup copy first!!! "
-+		"(the EEPROM content includes the PCI config header!! "
-+		"If you kill important stuff, then you WILL "
-+		"get in trouble and people DID get in trouble already)\n");
-+	return OK;
-+
-+	FN_ENTER;
-+
-+	data_verify = kmalloc(len, GFP_KERNEL);
-+	if (!data_verify) {
-+		goto end;
-+	}
-+
-+	/* first we need to enable the OE (EEPROM Output Enable) GPIO line
-+	 * to be able to write to the EEPROM.
-+	 * NOTE: an EEPROM writing success has been reported,
-+	 * but you probably have to modify GPIO_OUT, too,
-+	 * and you probably need to activate a different GPIO
-+	 * line instead! */
-+	gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE);
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1);
-+	write_flush(adev);
-+
-+	/* ok, now start writing the data out */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i));
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 1);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("WARNING, DANGER!!! "
-+					"Timeout waiting for EEPROM write\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+	}
-+
-+	/* disable EEPROM writing */
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig);
-+	write_flush(adev);
-+
-+	/* now start a verification run */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("timeout waiting for EEPROM read\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+
-+		data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA);
-+	}
-+
-+	if (0 == memcmp(charbuf, data_verify, len))
-+		result = OK; /* read data matches, success */
-+
-+end:
-+	kfree(data_verify);
-+	FN_EXIT1(result);
-+	return result;
-+}
-+#endif /* UNUSED */
-+
-+
-+/***********************************************************************
-+** acxpci_s_read_phy_reg
-+**
-+** Messing with rx/tx disabling and enabling here
-+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic
-+*/
-+int
-+acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	int result = NOT_OK;
-+	int count;
-+
-+	FN_ENTER;
-+
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			*charbuf = 0;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "count was %u\n", count);
-+	*charbuf = read_reg8(adev, IO_ACX_PHY_DATA);
-+
-+	log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg);
-+	result = OK;
-+	goto fail; /* silence compiler warning */
-+fail:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+	FN_ENTER;
-+
-+	/* mprusko said that 32bit accesses result in distorted sensitivity
-+	 * on his card. Unconfirmed, looks like it's not true (most likely since we
-+	 * now properly flush writes). */
-+	write_reg32(adev, IO_ACX_PHY_DATA, value);
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 1);
-+	write_flush(adev);
-+	log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+#define NO_AUTO_INCREMENT	1
-+
-+/***********************************************************************
-+** acxpci_s_write_fw
-+**
-+** Write the firmware image into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	1	firmware image corrupted
-+**	0	success
-+*/
-+static int
-+acxpci_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset)
-+{
-+	int len, size;
-+	u32 sum, v32;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+	write_reg32(adev, IO_ACX_SLV_END_CTL, 0);
-+
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+	write_flush(adev);
-+#endif
-+
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		sum += p[0]+p[1]+p[2]+p[3];
-+		p += 4;
-+		len += 4;
-+
-+#if NO_AUTO_INCREMENT
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+		write_flush(adev);
-+#endif
-+		write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32);
-+	}
-+
-+	log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n",
-+			size, sum, le32_to_cpu(fw_image->chksum));
-+
-+	/* compare our checksum with the stored image checksum */
-+	return (sum != le32_to_cpu(fw_image->chksum));
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_validate_fw
-+**
-+** Compare the firmware image given with
-+** the firmware image written into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**   fw_image  firmware image.
-+**
-+** Returns:
-+**	NOT_OK	firmware image corrupted or not correctly written
-+**	OK	success
-+*/
-+static int
-+acxpci_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image,
-+				u32 offset)
-+{
-+	u32 sum, v32, w32;
-+	int len, size;
-+	int result = OK;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+	write_reg32(adev, IO_ACX_SLV_END_CTL, 0);
-+
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+#endif
-+
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		p += 4;
-+		len += 4;
-+
-+#if NO_AUTO_INCREMENT
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+#endif
-+		w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA);
-+
-+		if (unlikely(w32 != v32)) {
-+			printk("acx: FATAL: firmware upload: "
-+			"data parts at offset %d don't match (0x%08X vs. 0x%08X)! "
-+			"I/O timing issues or defective memory, with DWL-xx0+? "
-+			"ACX_IO_WIDTH=16 may help. Please report\n",
-+				len, v32, w32);
-+			result = NOT_OK;
-+			break;
-+		}
-+
-+		sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24);
-+	}
-+
-+	/* sum control verification */
-+	if (result != NOT_OK) {
-+		if (sum != le32_to_cpu(fw_image->chksum)) {
-+			printk("acx: FATAL: firmware upload: "
-+				"checksums don't match!\n");
-+			result = NOT_OK;
-+		}
-+	}
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_upload_fw
-+**
-+** Called from acx_reset_dev
-+*/
-+static int
-+acxpci_s_upload_fw(acx_device_t *adev)
-+{
-+	firmware_image_t *fw_image = NULL;
-+	int res = NOT_OK;
-+	int try;
-+	u32 file_size;
-+	char filename[sizeof("tiacx1NNcNN")];
-+
-+	FN_ENTER;
-+
-+	/* print exact chipset and radio ID to make sure people really get a clue on which files exactly they are supposed to provide,
-+	 * since firmware loading is the biggest enduser PITA with these chipsets.
-+	 * Not printing radio ID in 0xHEX in order to not confuse them into wrong file naming */
-+	printk(	"acx: need to load firmware for acx1%02d chipset with radio ID %02x, please provide via firmware hotplug:\n"
-+		"acx: either one file only (<c>ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate <r>adio-specific extension file)\n",
-+		IS_ACX111(adev)*11, adev->radio_type);
-+
-+	/* Try combined, then main image */
-+	adev->need_radio_fw = 0;
-+	snprintf(filename, sizeof(filename), "tiacx1%02dc%02X",
-+		IS_ACX111(adev)*11, adev->radio_type);
-+
-+	fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size);
-+	if (!fw_image) {
-+		adev->need_radio_fw = 1;
-+		filename[sizeof("tiacx1NN")-1] = '\0';
-+		fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size);
-+		if (!fw_image) {
-+			FN_EXIT1(NOT_OK);
-+			return NOT_OK;
-+		}
-+	}
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxpci_s_write_fw(adev, fw_image, 0);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (main/combined): %d\n", res);
-+		if (OK == res) {
-+			res = acxpci_s_validate_fw(adev, fw_image, 0);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw "
-+					"(main/combined): %d\n", res);
-+		}
-+
-+		if (OK == res) {
-+			SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED);
-+			break;
-+		}
-+		printk("acx: firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+	vfree(fw_image);
-+
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_upload_radio
-+**
-+** Uploads the appropriate radio module firmware into the card.
-+*/
-+int
-+acxpci_s_upload_radio(acx_device_t *adev)
-+{
-+	acx_ie_memmap_t mm;
-+	firmware_image_t *radio_image;
-+	acx_cmd_radioinit_t radioinit;
-+	int res = NOT_OK;
-+	int try;
-+	u32 offset;
-+	u32 size;
-+	char filename[sizeof("tiacx1NNrNN")];
-+
-+	if (!adev->need_radio_fw) return OK;
-+
-+	FN_ENTER;
-+
-+	acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+	offset = le32_to_cpu(mm.CodeEnd);
-+
-+	snprintf(filename, sizeof(filename), "tiacx1%02dr%02X",
-+		IS_ACX111(adev)*11,
-+		adev->radio_type);
-+	radio_image = acx_s_read_fw(&adev->pdev->dev, filename, &size);
-+	if (!radio_image) {
-+		printk("acx: can't load radio module '%s'\n", filename);
-+		goto fail;
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0);
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxpci_s_write_fw(adev, radio_image, offset);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res);
-+		if (OK == res) {
-+			res = acxpci_s_validate_fw(adev, radio_image, offset);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res);
-+		}
-+
-+		if (OK == res)
-+			break;
-+		printk("acx: radio firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+	radioinit.offset = cpu_to_le32(offset);
-+	/* no endian conversion needed, remains in card CPU area: */
-+	radioinit.len = radio_image->size;
-+
-+	vfree(radio_image);
-+
-+	if (OK != res)
-+		goto fail;
-+
-+	/* will take a moment so let's have a big timeout */
-+	acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT,
-+		&radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000));
-+
-+	res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+fail:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_l_reset_mac
-+**
-+** MAC will be reset
-+** Call context: reset_dev
-+*/
-+static void
-+acxpci_l_reset_mac(acx_device_t *adev)
-+{
-+	u16 temp;
-+
-+	FN_ENTER;
-+
-+	/* halt eCPU */
-+	temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1;
-+	write_reg16(adev, IO_ACX_ECPU_CTRL, temp);
-+
-+	/* now do soft reset of eCPU, set bit */
-+	temp = read_reg16(adev, IO_ACX_SOFT_RESET) | 0x1;
-+	log(L_DEBUG, "%s: enable soft reset...\n", __func__);
-+	write_reg16(adev, IO_ACX_SOFT_RESET, temp);
-+	write_flush(adev);
-+
-+	/* now clear bit again: deassert eCPU reset */
-+	log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__);
-+	write_reg16(adev, IO_ACX_SOFT_RESET, temp & ~0x1);
-+
-+	/* now start a burst read from initial EEPROM */
-+	temp = read_reg16(adev, IO_ACX_EE_START) | 0x1;
-+	write_reg16(adev, IO_ACX_EE_START, temp);
-+	write_flush(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_verify_init
-+*/
-+static int
-+acxpci_s_verify_init(acx_device_t *adev)
-+{
-+	int result = NOT_OK;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	timeout = jiffies + 2*HZ;
-+	for (;;) {
-+		u16 irqstat = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+		if (irqstat & HOST_INT_FCS_THRESHOLD) {
-+			result = OK;
-+			write_reg16(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD);
-+			break;
-+		}
-+		if (time_after(jiffies, timeout))
-+			break;
-+		/* Init may take up to ~0.5 sec total */
-+		acx_s_msleep(50);
-+	}
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** A few low-level helpers
-+**
-+** Note: these functions are not protected by lock
-+** and thus are never allowed to be called from IRQ.
-+** Also they must not race with fw upload which uses same hw regs
-+*/
-+
-+/***********************************************************************
-+** acxpci_write_cmd_type_status
-+*/
-+
-+static inline void
-+acxpci_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status)
-+{
-+	writel(type | (status << 16), adev->cmd_area);
-+	write_flush(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_read_cmd_type_status
-+*/
-+static u32
-+acxpci_read_cmd_type_status(acx_device_t *adev)
-+{
-+	u32 cmd_type, cmd_status;
-+
-+	cmd_type = readl(adev->cmd_area);
-+	cmd_status = (cmd_type >> 16);
-+	cmd_type = (u16)cmd_type;
-+
-+	log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n",
-+		cmd_type, cmd_status,
-+		acx_cmd_status_str(cmd_status));
-+
-+	return cmd_status;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_reset_dev
-+**
-+** Arguments:
-+**	netdevice that contains the adev variable
-+** Returns:
-+**	NOT_OK on fail
-+**	OK on success
-+** Side effects:
-+**	device is hard reset
-+** Call context:
-+**	acxpci_e_probe
-+** Comment:
-+**	This resets the device using low level hardware calls
-+**	as well as uploads and verifies the firmware to the card
-+*/
-+
-+static inline void
-+init_mboxes(acx_device_t *adev)
-+{
-+	u32 cmd_offs, info_offs;
-+
-+	cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS);
-+	info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS);
-+	adev->cmd_area = (u8 *)adev->iobase2 + cmd_offs;
-+	adev->info_area = (u8 *)adev->iobase2 + info_offs;
-+	log(L_DEBUG, "iobase2=%p\n"
-+		"cmd_mbox_offset=%X cmd_area=%p\n"
-+		"info_mbox_offset=%X info_area=%p\n",
-+		adev->iobase2,
-+		cmd_offs, adev->cmd_area,
-+		info_offs, adev->info_area);
-+}
-+
-+
-+static inline void
-+read_eeprom_area(acx_device_t *adev)
-+{
-+#if ACX_DEBUG > 1
-+	int offs;
-+	u8 tmp;
-+
-+	for (offs = 0x8c; offs < 0xb9; offs++)
-+		acxpci_read_eeprom_byte(adev, offs, &tmp);
-+#endif
-+}
-+
-+
-+static int
-+acxpci_s_reset_dev(acx_device_t *adev)
-+{
-+	const char* msg = "";
-+	unsigned long flags;
-+	int result = NOT_OK;
-+	u16 hardware_info;
-+	u16 ecpu_ctrl;
-+	int count;
-+
-+	FN_ENTER;
-+
-+	/* reset the device to make sure the eCPU is stopped
-+	 * to upload the firmware correctly */
-+
-+	acx_lock(adev, flags);
-+
-+	acxpci_l_reset_mac(adev);
-+
-+	ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1;
-+	if (!ecpu_ctrl) {
-+		msg = "eCPU is already running. ";
-+		goto end_unlock;
-+	}
-+
-+#ifdef WE_DONT_NEED_THAT_DO_WE
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) {
-+		/* eCPU most likely means "embedded CPU" */
-+		msg = "eCPU did not start after boot from flash. ";
-+		goto end_unlock;
-+	}
-+
-+	/* check sense on reset flags */
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) {
-+		printk("%s: eCPU did not start after boot (SOR), "
-+			"is this fatal?\n", adev->ndev->name);
-+	}
-+#endif
-+	/* scan, if any, is stopped now, setting corresponding IRQ bit */
-+	adev->irq_status |= HOST_INT_SCAN_COMPLETE;
-+
-+	acx_unlock(adev, flags);
-+
-+	/* need to know radio type before fw load */
-+	/* Need to wait for arrival of this information in a loop,
-+	 * most probably since eCPU runs some init code from EEPROM
-+	 * (started burst read in reset_mac()) which also
-+	 * sets the radio type ID */
-+
-+	count = 0xffff;
-+	do {
-+		hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION);
-+		if (!--count) {
-+			msg = "eCPU didn't indicate radio type";
-+			goto end_fail;
-+		}
-+		cpu_relax();
-+	} while (!(hardware_info & 0xff00)); /* radio type still zero? */
-+
-+	/* printk("DEBUG: count %d\n", count); */
-+	adev->form_factor = hardware_info & 0xff;
-+	adev->radio_type = hardware_info >> 8;
-+
-+	/* load the firmware */
-+	if (OK != acxpci_s_upload_fw(adev))
-+		goto end_fail;
-+
-+	/* acx_s_msleep(10);	this one really shouldn't be required */
-+
-+	/* now start eCPU by clearing bit */
-+	write_reg16(adev, IO_ACX_ECPU_CTRL, ecpu_ctrl & ~0x1);
-+	log(L_DEBUG, "booted eCPU up and waiting for completion...\n");
-+
-+	/* wait for eCPU bootup */
-+	if (OK != acxpci_s_verify_init(adev)) {
-+		msg = "timeout waiting for eCPU. ";
-+		goto end_fail;
-+	}
-+	log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n");
-+
-+	init_mboxes(adev);
-+	acxpci_write_cmd_type_status(adev, 0, 0);
-+
-+	/* test that EEPROM is readable */
-+	read_eeprom_area(adev);
-+
-+	result = OK;
-+	goto end;
-+
-+/* Finish error message. Indicate which function failed */
-+end_unlock:
-+	acx_unlock(adev, flags);
-+end_fail:
-+	printk("acx: %sreset_dev() FAILED\n", msg);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_issue_cmd_timeo
-+**
-+** Sends command to fw, extract result
-+**
-+** NB: we do _not_ take lock inside, so be sure to not touch anything
-+** which may interfere with IRQ handler operation
-+**
-+** TODO: busy wait is a bit silly, so:
-+** 1) stop doing many iters - go to sleep after first
-+** 2) go to waitqueue based approach: wait, not poll!
-+*/
-+#undef FUNC
-+#define FUNC "issue_cmd"
-+
-+#if !ACX_DEBUG
-+int
-+acxpci_s_issue_cmd_timeo(
-+	acx_device_t *adev,
-+	unsigned int cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout)
-+{
-+#else
-+int
-+acxpci_s_issue_cmd_timeo_debug(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout,
-+	const char* cmdstr)
-+{
-+	unsigned long start = jiffies;
-+#endif
-+	const char *devname;
-+	unsigned counter;
-+	u16 irqtype;
-+	u16 cmd_status;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	devname = adev->ndev->name;
-+	if (!devname || !devname[0] || devname[4]=='%')
-+		devname = "acx";
-+
-+	log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n",
-+		cmdstr, buflen, cmd_timeout,
-+		buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1);
-+
-+	if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) {
-+		printk("%s: "FUNC"(): firmware is not loaded yet, "
-+			"cannot execute commands!\n", devname);
-+		goto bad;
-+	}
-+
-+	if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) {
-+		printk("input buffer (len=%u):\n", buflen);
-+		acx_dump_bytes(buffer, buflen);
-+	}
-+
-+	/* wait for firmware to become idle for our command submission */
-+	timeout = HZ/5;
-+	counter = (timeout * 1000 / HZ) - 1; /* in ms */
-+	timeout += jiffies;
-+	do {
-+		cmd_status = acxpci_read_cmd_type_status(adev);
-+		/* Test for IDLE state */
-+		if (!cmd_status)
-+			break;
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	if (!counter) {
-+		/* the card doesn't get idle, we're in trouble */
-+		printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n",
-+			devname, cmd_status);
-+		goto bad;
-+	} else if (counter < 190) { /* if waited >10ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. "
-+			"Please report\n", 199 - counter);
-+	}
-+
-+	/* now write the parameters of the command if needed */
-+	if (buffer && buflen) {
-+		/* if it's an INTERROGATE command, just pass the length
-+		 * of parameters to read, as data */
-+#if CMD_DISCOVERY
-+		if (cmd == ACX1xx_CMD_INTERROGATE)
-+			memset_io(adev->cmd_area + 4, 0xAA, buflen);
-+#endif
-+		/* adev->cmd_area points to PCI device's memory, not to RAM! */
-+		memcpy_toio(adev->cmd_area + 4, buffer,
-+			(cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen);
-+	}
-+	/* now write the actual command type */
-+	acxpci_write_cmd_type_status(adev, cmd, 0);
-+	/* execute command */
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD);
-+	write_flush(adev);
-+
-+	/* wait for firmware to process command */
-+
-+	/* Ensure nonzero and not too large timeout.
-+	** Also converts e.g. 100->99, 200->199
-+	** which is nice but not essential */
-+	cmd_timeout = (cmd_timeout-1) | 1;
-+	if (unlikely(cmd_timeout > 1199))
-+		cmd_timeout = 1199;
-+	/* clear CMD_COMPLETE bit. can be set only by IRQ handler: */
-+	adev->irq_status &= ~HOST_INT_CMD_COMPLETE;
-+
-+	/* we schedule away sometimes (timeout can be large) */
-+	counter = cmd_timeout;
-+	timeout = jiffies + cmd_timeout * HZ / 1000;
-+	do {
-+		if (!adev->irqs_active) { /* IRQ disabled: poll */
-+			irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+			if (irqtype & HOST_INT_CMD_COMPLETE) {
-+				write_reg16(adev, IO_ACX_IRQ_ACK,
-+						HOST_INT_CMD_COMPLETE);
-+				break;
-+			}
-+		} else { /* Wait when IRQ will set the bit */
-+			irqtype = adev->irq_status;
-+			if (irqtype & HOST_INT_CMD_COMPLETE)
-+				break;
-+		}
-+
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	/* save state for debugging */
-+	cmd_status = acxpci_read_cmd_type_status(adev);
-+
-+	/* put the card in IDLE state */
-+	acxpci_write_cmd_type_status(adev, 0, 0);
-+
-+	if (!counter) {	/* timed out! */
-+		printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. "
-+			"irq bits:0x%04X irq_status:0x%04X timeout:%dms "
-+			"cmd_status:%d (%s)\n",
-+			devname, (adev->irqs_active) ? "waiting" : "polling",
-+			irqtype, adev->irq_status, cmd_timeout,
-+			cmd_status, acx_cmd_status_str(cmd_status));
-+		goto bad;
-+	} else if (cmd_timeout - counter > 30) { /* if waited >30ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. "
-+			"count:%d. Please report\n",
-+			(adev->irqs_active) ? "waited" : "polled",
-+			cmd_timeout - counter, counter);
-+	}
-+
-+	if (1 != cmd_status) { /* it is not a 'Success' */
-+		printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). "
-+			"Took %dms of %d\n",
-+			devname, cmd_status, acx_cmd_status_str(cmd_status),
-+			cmd_timeout - counter, cmd_timeout);
-+		/* zero out result buffer
-+		 * WARNING: this will trash stack in case of illegally large input
-+		 * length! */
-+		if (buffer && buflen)
-+			memset(buffer, 0, buflen);
-+		goto bad;
-+	}
-+
-+	/* read in result parameters if needed */
-+	if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) {
-+		/* adev->cmd_area points to PCI device's memory, not to RAM! */
-+		memcpy_fromio(buffer, adev->cmd_area + 4, buflen);
-+		if (acx_debug & L_DEBUG) {
-+			printk("output buffer (len=%u): ", buflen);
-+			acx_dump_bytes(buffer, buflen);
-+		}
-+	}
-+/* ok: */
-+	log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n",
-+			 cmdstr, jiffies - start);
-+	FN_EXIT1(OK);
-+	return OK;
-+
-+bad:
-+	/* Give enough info so that callers can avoid
-+	** printing their own diagnostic messages */
-+#if ACX_DEBUG
-+	printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr);
-+#else
-+	printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd);
-+#endif
-+	dump_stack();
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#ifdef NONESSENTIAL_FEATURES
-+typedef struct device_id {
-+	unsigned char id[6];
-+	char *descr;
-+	char *type;
-+} device_id_t;
-+
-+static const device_id_t
-+device_ids[] =
-+{
-+	{
-+		{'G', 'l', 'o', 'b', 'a', 'l'},
-+		NULL,
-+		NULL,
-+	},
-+	{
-+		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
-+		"uninitialized",
-+		"SpeedStream SS1021 or Gigafast WF721-AEX"
-+	},
-+	{
-+		{0x80, 0x81, 0x82, 0x83, 0x84, 0x85},
-+		"non-standard",
-+		"DrayTek Vigor 520"
-+	},
-+	{
-+		{'?', '?', '?', '?', '?', '?'},
-+		"non-standard",
-+		"Level One WPC-0200"
-+	},
-+	{
-+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
-+		"empty",
-+		"DWL-650+ variant"
-+	}
-+};
-+
-+static void
-+acx_show_card_eeprom_id(acx_device_t *adev)
-+{
-+	unsigned char buffer[CARD_EEPROM_ID_SIZE];
-+	int i;
-+
-+	memset(&buffer, 0, CARD_EEPROM_ID_SIZE);
-+	/* use direct EEPROM access */
-+	for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) {
-+		if (OK != acxpci_read_eeprom_byte(adev,
-+					 ACX100_EEPROM_ID_OFFSET + i,
-+					 &buffer[i])) {
-+			printk("acx: reading EEPROM FAILED\n");
-+			break;
-+		}
-+	}
-+
-+	for (i = 0; i < VEC_SIZE(device_ids); i++) {
-+		if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) {
-+			if (device_ids[i].descr) {
-+				printk("acx: EEPROM card ID string check "
-+					"found %s card ID: is this %s?\n",
-+					device_ids[i].descr, device_ids[i].type);
-+			}
-+			break;
-+		}
-+	}
-+	if (i == VEC_SIZE(device_ids)) {
-+		printk("acx: EEPROM card ID string check found "
-+			"unknown card: expected 'Global', got '%.*s\'. "
-+			"Please report\n", CARD_EEPROM_ID_SIZE, buffer);
-+	}
-+}
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+
-+/***********************************************************************
-+** acxpci_free_desc_queues
-+**
-+** Releases the queues that have been allocated, the
-+** others have been initialised to NULL so this
-+** function can be used if only part of the queues were allocated.
-+*/
-+
-+static inline void
-+free_coherent(struct pci_dev *hwdev, size_t size,
-+			void *vaddr, dma_addr_t dma_handle)
-+{
-+	dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev,
-+			size, vaddr, dma_handle);
-+}
-+
-+void
-+acxpci_free_desc_queues(acx_device_t *adev)
-+{
-+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \
-+	if (ptr) { \
-+		free_coherent(0, size, ptr, phyaddr); \
-+		ptr = NULL; \
-+		size = 0; \
-+	}
-+
-+	FN_ENTER;
-+
-+	ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy);
-+
-+	adev->txdesc_start = NULL;
-+
-+	ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy);
-+
-+	adev->rxdesc_start = NULL;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_delete_dma_regions
-+*/
-+static void
-+acxpci_s_delete_dma_regions(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+	/* disable radio Tx/Rx. Shouldn't we use the firmware commands
-+	 * here instead? Or are we that much down the road that it's no
-+	 * longer possible here? */
-+	write_reg16(adev, IO_ACX_ENABLE, 0);
-+
-+	acx_s_msleep(100);
-+
-+	acx_lock(adev, flags);
-+	acxpci_free_desc_queues(adev);
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_probe
-+**
-+** Probe routine called when a PCI device w/ matching ID is found.
-+** Here's the sequence:
-+**   - Allocate the PCI resources.
-+**   - Read the PCMCIA attribute memory to make sure we have a WLAN card
-+**   - Reset the MAC
-+**   - Initialize the dev and wlan data
-+**   - Initialize the MAC
-+**
-+** pdev	- ptr to pci device structure containing info about pci configuration
-+** id	- ptr to the device id entry that matched this device
-+*/
-+static const u16
-+IO_ACX100[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_END_CTL */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x007c, /* IO_ACX_INT_TRIG */
-+	0x0098, /* IO_ACX_IRQ_MASK */
-+	0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00ac, /* IO_ACX_IRQ_ACK */
-+	0x00b0, /* IO_ACX_HINT_TRIG */
-+
-+	0x0104, /* IO_ACX_ENABLE */
-+
-+	0x0250, /* IO_ACX_EEPROM_CTL */
-+	0x0254, /* IO_ACX_EEPROM_ADDR */
-+	0x0258, /* IO_ACX_EEPROM_DATA */
-+	0x025c, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0268, /* IO_ACX_PHY_ADDR */
-+	0x026c, /* IO_ACX_PHY_DATA */
-+	0x0270, /* IO_ACX_PHY_CTL */
-+
-+	0x0290, /* IO_ACX_GPIO_OE */
-+
-+	0x0298, /* IO_ACX_GPIO_OUT */
-+
-+	0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x02ac, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x02d0, /* IO_ACX_EE_START */
-+	0x02d4, /* IO_ACX_SOR_CFG */
-+	0x02d8 /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static const u16
-+IO_ACX111[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_END_CTL */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x00b4, /* IO_ACX_INT_TRIG */
-+	0x00d4, /* IO_ACX_IRQ_MASK */
-+	/* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */
-+	0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00e8, /* IO_ACX_IRQ_ACK */
-+	0x00ec, /* IO_ACX_HINT_TRIG */
-+
-+	0x01d0, /* IO_ACX_ENABLE */
-+
-+	0x0338, /* IO_ACX_EEPROM_CTL */
-+	0x033c, /* IO_ACX_EEPROM_ADDR */
-+	0x0340, /* IO_ACX_EEPROM_DATA */
-+	0x0344, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0350, /* IO_ACX_PHY_ADDR */
-+	0x0354, /* IO_ACX_PHY_DATA */
-+	0x0358, /* IO_ACX_PHY_CTL */
-+
-+	0x0374, /* IO_ACX_GPIO_OE */
-+
-+	0x037c, /* IO_ACX_GPIO_OUT */
-+
-+	0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x0390, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x0100, /* IO_ACX_EE_START */
-+	0x0104, /* IO_ACX_SOR_CFG */
-+	0x0108, /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static void
-+dummy_netdev_init(struct net_device *ndev) {}
-+
-+static int __devinit
-+acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-+{
-+	acx111_ie_configoption_t co;
-+	unsigned long mem_region1 = 0;
-+	unsigned long mem_region2 = 0;
-+	unsigned long mem_region1_size;
-+	unsigned long mem_region2_size;
-+	unsigned long phymem1;
-+	unsigned long phymem2;
-+	void *mem1 = NULL;
-+	void *mem2 = NULL;
-+	acx_device_t *adev = NULL;
-+	struct net_device *ndev = NULL;
-+	const char *chip_name;
-+	int result = -EIO;
-+	int err;
-+	u8 chip_type;
-+
-+	FN_ENTER;
-+
-+	/* Enable the PCI device */
-+	if (pci_enable_device(pdev)) {
-+		printk("acx: pci_enable_device() FAILED\n");
-+		result = -ENODEV;
-+		goto fail_pci_enable_device;
-+	}
-+
-+	/* enable busmastering (required for CardBus) */
-+	pci_set_master(pdev);
-+
-+	/* FIXME: prism54 calls pci_set_mwi() here,
-+	 * should we do/support the same? */
-+
-+	/* chiptype is u8 but id->driver_data is ulong
-+	** Works for now (possible values are 1 and 2) */
-+	chip_type = (u8)id->driver_data;
-+	/* acx100 and acx111 have different PCI memory regions */
-+	if (chip_type == CHIPTYPE_ACX100) {
-+		chip_name = "ACX100";
-+		mem_region1 = PCI_ACX100_REGION1;
-+		mem_region1_size  = PCI_ACX100_REGION1_SIZE;
-+
-+		mem_region2 = PCI_ACX100_REGION2;
-+		mem_region2_size  = PCI_ACX100_REGION2_SIZE;
-+	} else if (chip_type == CHIPTYPE_ACX111) {
-+		chip_name = "ACX111";
-+		mem_region1 = PCI_ACX111_REGION1;
-+		mem_region1_size  = PCI_ACX111_REGION1_SIZE;
-+
-+		mem_region2 = PCI_ACX111_REGION2;
-+		mem_region2_size  = PCI_ACX111_REGION2_SIZE;
-+	} else {
-+		printk("acx: unknown chip type 0x%04X\n", chip_type);
-+		goto fail_unknown_chiptype;
-+	}
-+
-+	/* Figure out our resources */
-+	phymem1 = pci_resource_start(pdev, mem_region1);
-+	phymem2 = pci_resource_start(pdev, mem_region2);
-+	if (!request_mem_region(phymem1, pci_resource_len(pdev, mem_region1), "acx_1")) {
-+		printk("acx: cannot reserve PCI memory region 1 (are you sure "
-+			"you have CardBus support in kernel?)\n");
-+		goto fail_request_mem_region1;
-+	}
-+	if (!request_mem_region(phymem2, pci_resource_len(pdev, mem_region2), "acx_2")) {
-+		printk("acx: cannot reserve PCI memory region 2\n");
-+		goto fail_request_mem_region2;
-+	}
-+	
-+	/* this used to be ioremap(), but ioremap_nocache()
-+	 * is much less risky, right? (and slower?)
-+	 * FIXME: we may want to go back to cached variant if it's
-+	 * certain that our code really properly handles
-+	 * cached operation (memory barriers, volatile?, ...)
-+	 * (but always keep this comment here regardless!)
-+	 * Possibly make this a driver config setting? */
-+	
-+	mem1 = ioremap_nocache(phymem1, mem_region1_size);
-+	if (!mem1) {
-+		printk("acx: ioremap() FAILED\n");
-+		goto fail_ioremap1;
-+	}
-+	mem2 = ioremap_nocache(phymem2, mem_region2_size);
-+	if (!mem2) {
-+		printk("acx: ioremap() #2 FAILED\n");
-+		goto fail_ioremap2;
-+	}
-+
-+	printk("acx: found %s-based wireless network card at %s, irq:%d, "
-+		"phymem1:0x%lX, phymem2:0x%lX, mem1:0x%p, mem1_size:%ld, "
-+		"mem2:0x%p, mem2_size:%ld\n",
-+		chip_name, pci_name(pdev), pdev->irq, phymem1, phymem2,
-+		mem1, mem_region1_size,
-+		mem2, mem_region2_size);
-+	log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug);
-+
-+	if (0 == pdev->irq) {
-+		printk("acx: can't use IRQ 0\n");
-+		goto fail_irq;
-+	}
-+
-+	ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init);
-+	/* (NB: memsets to 0 entire area) */
-+	if (!ndev) {
-+		printk("acx: no memory for netdevice struct\n");
-+		goto fail_alloc_netdev;
-+	}
-+
-+	ether_setup(ndev);
-+	ndev->open = &acxpci_e_open;
-+	ndev->stop = &acxpci_e_close;
-+	ndev->hard_start_xmit = &acx_i_start_xmit;
-+	ndev->get_stats = &acx_e_get_stats;
-+#if IW_HANDLER_VERSION <= 5
-+	ndev->get_wireless_stats = &acx_e_get_wireless_stats;
-+#endif
-+	ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
-+	ndev->set_multicast_list = &acxpci_i_set_multicast_list;
-+	ndev->tx_timeout = &acxpci_i_tx_timeout;
-+	ndev->change_mtu = &acx_e_change_mtu;
-+	ndev->watchdog_timeo = 4 * HZ;
-+	ndev->irq = pdev->irq;
-+	ndev->base_addr = pci_resource_start(pdev, 0);
-+
-+	adev = ndev2adev(ndev);
-+	spin_lock_init(&adev->lock);	/* initial state: unlocked */
-+	/* We do not start with downed sem: we want PARANOID_LOCKING to work */
-+	sema_init(&adev->sem, 1);	/* initial state: 1 (upped) */
-+	/* since nobody can see new netdev yet, we can as well
-+	** just _presume_ that we're under sem (instead of actually taking it): */
-+	/* acx_sem_lock(adev); */
-+	adev->pdev = pdev;
-+	adev->ndev = ndev;
-+	adev->dev_type = DEVTYPE_PCI;
-+	adev->chip_type = chip_type;
-+	adev->chip_name = chip_name;
-+	adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111;
-+	adev->membase = phymem1;
-+	adev->iobase = mem1;
-+	adev->membase2 = phymem2;
-+	adev->iobase2 = mem2;
-+	/* to find crashes due to weird driver access
-+	 * to unconfigured interface (ifup) */
-+	adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead;
-+
-+#ifdef NONESSENTIAL_FEATURES
-+	acx_show_card_eeprom_id(adev);
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+#ifdef SET_MODULE_OWNER
-+	SET_MODULE_OWNER(ndev);
-+#endif
-+	SET_NETDEV_DEV(ndev, &pdev->dev);
-+
-+	log(L_IRQ|L_INIT, "using IRQ %d\n", pdev->irq);
-+
-+	/* need to be able to restore PCI state after a suspend */
-+	pci_save_state(pdev);
-+	pci_set_drvdata(pdev, ndev);
-+
-+	/* ok, pci setup is finished, now start initializing the card */
-+
-+	/* NB: read_reg() reads may return bogus data before reset_dev(),
-+	 * since the firmware which directly controls large parts of the I/O
-+	 * registers isn't initialized yet.
-+	 * acx100 seems to be more affected than acx111 */
-+	if (OK != acxpci_s_reset_dev(adev))
-+		goto fail_reset;
-+
-+	if (IS_ACX100(adev)) {
-+		/* ACX100: configopt struct in cmd mailbox - directly after reset */
-+		memcpy_fromio(&co, adev->cmd_area, sizeof(co));
-+	}
-+
-+	if (OK != acx_s_init_mac(adev))
-+		goto fail_init_mac;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111: configopt struct needs to be queried after full init */
-+		acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS);
-+	}
-+
-+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */
-+	if (OK != acxpci_read_eeprom_byte(adev, 0x05, &adev->eeprom_version))
-+		goto fail_read_eeprom_version;
-+
-+	acx_s_parse_configoption(adev, &co);
-+	acx_s_set_defaults(adev);
-+	acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */
-+	acx_display_hardware_details(adev);
-+
-+	/* Register the card, AFTER everything else has been set up,
-+	 * since otherwise an ioctl could step on our feet due to
-+	 * firmware operations happening in parallel or uninitialized data */
-+	err = register_netdev(ndev);
-+	if (OK != err) {
-+		printk("acx: register_netdev() FAILED: %d\n", err);
-+		goto fail_register_netdev;
-+	}
-+
-+	acx_proc_register_entries(ndev);
-+
-+	/* Now we have our device, so make sure the kernel doesn't try
-+	 * to send packets even though we're not associated to a network yet */
-+	acx_stop_queue(ndev, "on probe");
-+	acx_carrier_off(ndev, "on probe");
-+
-+	/* after register_netdev() userspace may start working with dev
-+	 * (in particular, on other CPUs), we only need to up the sem */
-+	/* acx_sem_unlock(adev); */
-+
-+	printk("acx "ACX_RELEASE": net device %s, driver compiled "
-+		"against wireless extensions %d and Linux %s\n",
-+		ndev->name, WIRELESS_EXT, UTS_RELEASE);
-+
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	result = OK;
-+	goto done;
-+
-+	/* error paths: undo everything in reverse order... */
-+
-+fail_register_netdev:
-+
-+	acxpci_s_delete_dma_regions(adev);
-+	pci_set_drvdata(pdev, NULL);
-+
-+fail_init_mac:
-+fail_read_eeprom_version:
-+fail_reset:
-+
-+	free_netdev(ndev);
-+fail_alloc_netdev:
-+fail_irq:
-+
-+	iounmap(mem2);
-+fail_ioremap2:
-+
-+	iounmap(mem1);
-+fail_ioremap1:
-+
-+	release_mem_region(pci_resource_start(pdev, mem_region2),
-+			   pci_resource_len(pdev, mem_region2));
-+fail_request_mem_region2:
-+
-+	release_mem_region(pci_resource_start(pdev, mem_region1),
-+			   pci_resource_len(pdev, mem_region1));
-+fail_request_mem_region1:
-+fail_unknown_chiptype:
-+
-+	pci_disable_device(pdev);
-+fail_pci_enable_device:
-+
-+	pci_set_power_state(pdev, PCI_D3hot);
-+
-+done:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_remove
-+**
-+** Shut device down (if not hot unplugged)
-+** and deallocate PCI resources for the acx chip.
-+**
-+** pdev - ptr to PCI device structure containing info about pci configuration
-+*/
-+static void __devexit
-+acxpci_e_remove(struct pci_dev *pdev)
-+{
-+	struct net_device *ndev;
-+	acx_device_t *adev;
-+	unsigned long mem_region1, mem_region2;
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	ndev = (struct net_device*) pci_get_drvdata(pdev);
-+	if (!ndev) {
-+		log(L_DEBUG, "%s: card is unused. Skipping any release code\n",
-+			__func__);
-+		goto end;
-+	}
-+
-+	adev = ndev2adev(ndev);
-+
-+	/* If device wasn't hot unplugged... */
-+	if (adev_present(adev)) {
-+
-+		acx_sem_lock(adev);
-+
-+		/* disable both Tx and Rx to shut radio down properly */
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+
-+#ifdef REDUNDANT
-+		/* put the eCPU to sleep to save power
-+		 * Halting is not possible currently,
-+		 * since not supported by all firmware versions */
-+		acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0);
-+#endif
-+		acx_lock(adev, flags);
-+		/* disable power LED to save power :-) */
-+		log(L_INIT, "switching off power LED to save power\n");
-+		acxpci_l_power_led(adev, 0);
-+		/* stop our eCPU */
-+		if (IS_ACX111(adev)) {
-+			/* FIXME: does this actually keep halting the eCPU?
-+			 * I don't think so...
-+			 */
-+			acxpci_l_reset_mac(adev);
-+		} else {
-+			u16 temp;
-+			/* halt eCPU */
-+			temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1;
-+			write_reg16(adev, IO_ACX_ECPU_CTRL, temp);
-+			write_flush(adev);
-+		}
-+		acx_unlock(adev, flags);
-+
-+		acx_sem_unlock(adev);
-+	}
-+
-+	/* unregister the device to not let the kernel
-+	 * (e.g. ioctls) access a half-deconfigured device
-+	 * NB: this will cause acxpci_e_close() to be called,
-+	 * thus we shouldn't call it under sem! */
-+	log(L_INIT, "removing device %s\n", ndev->name);
-+	unregister_netdev(ndev);
-+
-+	/* unregister_netdev ensures that no references to us left.
-+	 * For paranoid reasons we continue to follow the rules */
-+	acx_sem_lock(adev);
-+
-+	if (adev->dev_state_mask & ACX_STATE_IFACE_UP) {
-+		acxpci_s_down(ndev);
-+		CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	}
-+
-+	acx_proc_unregister_entries(ndev);
-+
-+	if (IS_ACX100(adev)) {
-+		mem_region1 = PCI_ACX100_REGION1;
-+		mem_region2 = PCI_ACX100_REGION2;
-+	} else {
-+		mem_region1 = PCI_ACX111_REGION1;
-+		mem_region2 = PCI_ACX111_REGION2;
-+	}
-+
-+	/* finally, clean up PCI bus state */
-+	acxpci_s_delete_dma_regions(adev);
-+	if (adev->iobase) iounmap(adev->iobase);
-+	if (adev->iobase2) iounmap(adev->iobase2);
-+	release_mem_region(pci_resource_start(pdev, mem_region1),
-+			   pci_resource_len(pdev, mem_region1));
-+	release_mem_region(pci_resource_start(pdev, mem_region2),
-+			   pci_resource_len(pdev, mem_region2));
-+	pci_disable_device(pdev);
-+
-+	/* remove dev registration */
-+	pci_set_drvdata(pdev, NULL);
-+
-+	acx_sem_unlock(adev);
-+
-+	/* Free netdev (quite late,
-+	 * since otherwise we might get caught off-guard
-+	 * by a netdev timeout handler execution
-+	 * expecting to see a working dev...) */
-+	free_netdev(ndev);
-+
-+	/* put device into ACPI D3 mode (shutdown) */
-+	pci_set_power_state(pdev, PCI_D3hot);
-+
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** TODO: PM code needs to be fixed / debugged / tested.
-+*/
-+#ifdef CONFIG_PM
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxpci_e_suspend(struct pci_dev *pdev, pm_message_t state)
-+#else
-+acxpci_e_suspend(struct pci_dev *pdev, u32 state)
-+#endif
-+{
-+	struct net_device *ndev = pci_get_drvdata(pdev);
-+	acx_device_t *adev;
-+
-+	FN_ENTER;
-+	printk("acx: suspend handler is experimental!\n");
-+	printk("sus: dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		goto end;
-+
-+	adev = ndev2adev(ndev);
-+	printk("sus: adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	netif_device_detach(ndev);	/* this one cannot sleep */
-+	acxpci_s_down(ndev);
-+	/* down() does not set it to 0xffff, but here we really want that */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	acxpci_s_delete_dma_regions(adev);
-+	pci_save_state(pdev);
-+	pci_set_power_state(pdev, PCI_D3hot);
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+static int
-+acxpci_e_resume(struct pci_dev *pdev)
-+{
-+	struct net_device *ndev = pci_get_drvdata(pdev);
-+	acx_device_t *adev;
-+
-+	FN_ENTER;
-+
-+	printk("acx: resume handler is experimental!\n");
-+	printk("rsm: got dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		goto end;
-+
-+	adev = ndev2adev(ndev);
-+	printk("rsm: got adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	pci_set_power_state(pdev, PCI_D0);
-+	printk("rsm: power state PCI_D0 set\n");
-+	pci_restore_state(pdev);
-+	printk("rsm: PCI state restored\n");
-+
-+	if (OK != acxpci_s_reset_dev(adev))
-+		goto end_unlock;
-+	printk("rsm: device reset done\n");
-+	if (OK != acx_s_init_mac(adev))
-+		goto end_unlock;
-+	printk("rsm: init MAC done\n");
-+
-+	acxpci_s_up(ndev);
-+	printk("rsm: acx up done\n");
-+
-+	/* now even reload all card parameters as they were before suspend,
-+	 * and possibly be back in the network again already :-) */
-+	if (ACX_STATE_IFACE_UP & adev->dev_state_mask) {
-+		adev->set_mask = GETSET_ALL;
-+		acx_s_update_card_settings(adev);
-+		printk("rsm: settings updated\n");
-+	}
-+	netif_device_attach(ndev);
-+	printk("rsm: device attached\n");
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+end:
-+	/* we need to return OK here anyway, right? */
-+	FN_EXIT0;
-+	return OK;
-+}
-+#endif /* CONFIG_PM */
-+
-+
-+/***********************************************************************
-+** acxpci_s_up
-+**
-+** This function is called by acxpci_e_open (when ifconfig sets the device as up)
-+**
-+** Side effects:
-+** - Enables on-card interrupt requests
-+** - calls acx_s_start
-+*/
-+
-+static void
-+enable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask);
-+	write_reg16(adev, IO_ACX_FEMR, 0x8000);
-+	adev->irqs_active = 1;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxpci_s_up(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+	enable_acx_irq(adev);
-+	acx_unlock(adev, flags);
-+
-+	/* acx fw < 1.9.3.e has a hardware timer, and older drivers
-+	** used to use it. But we don't do that anymore, our OS
-+	** has reliable software timers */
-+	init_timer(&adev->mgmt_timer);
-+	adev->mgmt_timer.function = acx_i_timer;
-+	adev->mgmt_timer.data = (unsigned long)adev;
-+
-+	/* Need to set ACX_STATE_IFACE_UP first, or else
-+	** timer won't be started by acx_set_status() */
-+	SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_2_STA:
-+		/* actual scan cmd will happen in start() */
-+		acx_set_status(adev, ACX_STATUS_1_SCANNING); break;
-+	case ACX_MODE_3_AP:
-+	case ACX_MODE_MONITOR:
-+		acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break;
-+	}
-+
-+	acx_s_start(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_down
-+**
-+** NB: device may be already hot unplugged if called from acxpci_e_remove()
-+**
-+** Disables on-card interrupt request, stops softirq and timer, stops queue,
-+** sets status == STOPPED
-+*/
-+
-+static void
-+disable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+
-+	/* I guess mask is not 0xffff because acx100 won't signal
-+	** cmd completion then (needed for ifup).
-+	** Someone with acx100 please confirm */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	adev->irqs_active = 0;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxpci_s_down(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	/* Disable IRQs first, so that IRQs cannot race with us */
-+	/* then wait until interrupts have finished executing on other CPUs */
-+	acx_lock(adev, flags);
-+	disable_acx_irq(adev);
-+	synchronize_irq(adev->pdev->irq);
-+	acx_unlock(adev, flags);
-+
-+	/* we really don't want to have an asynchronous tasklet disturb us
-+	** after something vital for its job has been shut down, so
-+	** end all remaining work now.
-+	**
-+	** NB: carrier_off (done by set_status below) would lead to
-+	** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK().
-+	** That's why we do FLUSH first.
-+	**
-+	** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK()
-+	** waits for acx_e_after_interrupt_task to complete if it is running
-+	** on another CPU, but acx_e_after_interrupt_task
-+	** will sleep on sem forever, because it is taken by us!
-+	** Work around that by temporary sem unlock.
-+	** This will fail miserably if we'll be hit by concurrent
-+	** iwconfig or something in between. TODO! */
-+	acx_sem_unlock(adev);
-+	FLUSH_SCHEDULED_WORK();
-+	acx_sem_lock(adev);
-+
-+	/* This is possible:
-+	** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task ->
-+	** -> set_status(ASSOCIATED) -> wake_queue()
-+	** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK
-+	** lock/unlock is just paranoia, maybe not needed */
-+	acx_lock(adev, flags);
-+	acx_stop_queue(ndev, "on ifdown");
-+	acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+	acx_unlock(adev, flags);
-+
-+	/* kernel/timer.c says it's illegal to del_timer_sync()
-+	** a timer which restarts itself. We guarantee this cannot
-+	** ever happen because acx_i_timer() never does this if
-+	** status is ACX_STATUS_0_STOPPED */
-+	del_timer_sync(&adev->mgmt_timer);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_open
-+**
-+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP
-+** from clear to set. In other words: ifconfig up.
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxpci_e_open(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_init_task_scheduler(adev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */
-+
-+	/* request shared IRQ handler */
-+	if (request_irq(ndev->irq, acxpci_i_interrupt, SA_SHIRQ, ndev->name, ndev)) {
-+		printk("%s: request_irq FAILED\n", ndev->name);
-+		result = -EAGAIN;
-+		goto done;
-+	}
-+	log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq);
-+
-+	/* ifup device */
-+	acxpci_s_up(ndev);
-+
-+	/* We don't currently have to do anything else.
-+	 * The setup of the MAC should be subsequently completed via
-+	 * the mlme commands.
-+	 * Higher layers know we're ready from dev->start==1 and
-+	 * dev->tbusy==0.  Our rx path knows to pass up received/
-+	 * frames because of dev->flags&IFF_UP is true.
-+	 */
-+done:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_close
-+**
-+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
-+** from set to clear. I.e. called by "ifconfig DEV down"
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxpci_e_close(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* ifdown device */
-+	CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	if (netif_device_present(ndev)) {
-+		acxpci_s_down(ndev);
-+	}
-+
-+	/* disable all IRQs, release shared IRQ handler */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	free_irq(ndev->irq, ndev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */
-+
-+	/* We currently don't have to do anything else.
-+	 * Higher layers know we're not ready from dev->start==0 and
-+	 * dev->tbusy==1.  Our rx path knows to not pass up received
-+	 * frames because of dev->flags&IFF_UP is false.
-+	 */
-+	acx_sem_unlock(adev);
-+
-+	log(L_INIT, "closed device\n");
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_i_tx_timeout
-+**
-+** Called from network core. Must not sleep!
-+*/
-+static void
-+acxpci_i_tx_timeout(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	unsigned int tx_num_cleaned;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* clean processed tx descs, they may have been completely full */
-+	tx_num_cleaned = acxpci_l_clean_txdesc(adev);
-+
-+	/* nothing cleaned, yet (almost) no free buffers available?
-+	 * --> clean all tx descs, no matter which status!!
-+	 * Note that I strongly suspect that doing emergency cleaning
-+	 * may confuse the firmware. This is a last ditch effort to get
-+	 * ANYTHING to work again...
-+	 *
-+	 * TODO: it's best to simply reset & reinit hw from scratch...
-+	 */
-+	if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) {
-+		printk("%s: FAILED to free any of the many full tx buffers. "
-+			"Switching to emergency freeing. "
-+			"Please report!\n", ndev->name);
-+		acxpci_l_clean_txdesc_emergency(adev);
-+	}
-+
-+	if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status))
-+		acx_wake_queue(ndev, "after tx timeout");
-+
-+	/* stall may have happened due to radio drift, so recalib radio */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+
-+	/* do unimportant work last */
-+	printk("%s: tx timeout!\n", ndev->name);
-+	adev->stats.tx_errors++;
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_i_set_multicast_list
-+** FIXME: most likely needs refinement
-+*/
-+static void
-+acxpci_i_set_multicast_list(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* firmwares don't have allmulti capability,
-+	 * so just use promiscuous mode instead in this case. */
-+	if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
-+		SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		/* let kernel know in case *we* needed to set promiscuous */
-+		ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI);
-+	} else {
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI);
-+	}
-+
-+	/* cannot update card settings directly here, atomic context */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_l_process_rxdesc
-+**
-+** Called directly and only from the IRQ handler
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_rxbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_rxbuffer(const acx_device_t *adev)
-+{
-+	register const struct rxhostdesc *rxhostdesc;
-+	int i;
-+	/* no FN_ENTER here, we don't want that */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+	if (unlikely(!rxhostdesc)) return;
-+	for (i = 0; i < RX_CNT; i++) {
-+		if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			printk("rx: buf %d full\n", i);
-+		rxhostdesc++;
-+	}
-+}
-+#endif
-+
-+static void
-+acxpci_l_process_rxdesc(acx_device_t *adev)
-+{
-+	register rxhostdesc_t *hostdesc;
-+	unsigned count, tail;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(acx_debug & L_BUFR))
-+		log_rxbuffer(adev);
-+
-+	/* First, have a loop to determine the first descriptor that's
-+	 * full, just in case there's a mismatch between our current
-+	 * rx_tail and the full descriptor we're supposed to handle. */
-+	tail = adev->rx_tail;
-+	count = RX_CNT;
-+	while (1) {
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		/* advance tail regardless of outcome of the below test */
-+		tail = (tail + 1) % RX_CNT;
-+
-+		if ((hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			break;		/* found it! */
-+
-+		if (unlikely(!--count))	/* hmm, no luck: all descs empty, bail out */
-+			goto end;
-+	}
-+
-+	/* now process descriptors, starting with the first we figured out */
-+	while (1) {
-+		log(L_BUFR, "rx: tail=%u Ctl_16=%04X Status=%08X\n",
-+			tail, hostdesc->Ctl_16, hostdesc->Status);
-+
-+		acx_l_process_rxbuf(adev, hostdesc->data);
-+
-+		hostdesc->Status = 0;
-+		/* flush all writes before adapter sees CTL_HOSTOWN change */
-+		wmb();
-+		/* Host no longer owns this, needs to be LAST */
-+		CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN));
-+
-+		/* ok, descriptor is handled, now check the next descriptor */
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+
-+		/* if next descriptor is empty, then bail out */
-+		if (!(hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 || !(hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			break;
-+
-+		tail = (tail + 1) % RX_CNT;
-+	}
-+end:
-+	adev->rx_tail = tail;
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_i_interrupt
-+**
-+** IRQ handler (atomic context, must not sleep, blah, blah)
-+*/
-+
-+/* scan is complete. all frames now on the receive queue are valid */
-+#define INFO_SCAN_COMPLETE      0x0001
-+#define INFO_WEP_KEY_NOT_FOUND  0x0002
-+/* hw has been reset as the result of a watchdog timer timeout */
-+#define INFO_WATCH_DOG_RESET    0x0003
-+/* failed to send out NULL frame from PS mode notification to AP */
-+/* recommended action: try entering 802.11 PS mode again */
-+#define INFO_PS_FAIL            0x0004
-+/* encryption/decryption process on a packet failed */
-+#define INFO_IV_ICV_FAILURE     0x0005
-+
-+/* Info mailbox format:
-+2 bytes: type
-+2 bytes: status
-+more bytes may follow
-+    rumors say about status:
-+	0x0000 info available (set by hw)
-+	0x0001 information received (must be set by host)
-+	0x1000 info available, mailbox overflowed (messages lost) (set by hw)
-+    but in practice we've seen:
-+	0x9000 when we did not set status to 0x0001 on prev message
-+	0x1001 when we did set it
-+	0x0000 was never seen
-+    conclusion: this is really a bitfield:
-+    0x1000 is 'info available' bit
-+    'mailbox overflowed' bit is 0x8000, not 0x1000
-+    value of 0x0000 probably means that there are no messages at all
-+    P.S. I dunno how in hell hw is supposed to notice that messages are lost -
-+    it does NOT clear bit 0x0001, and this bit will probably stay forever set
-+    after we set it once. Let's hope this will be fixed in firmware someday
-+*/
-+
-+static void
-+handle_info_irq(acx_device_t *adev)
-+{
-+#if ACX_DEBUG
-+	static const char * const info_type_msg[] = {
-+		"(unknown)",
-+		"scan complete",
-+		"WEP key not found",
-+		"internal watchdog reset was done",
-+		"failed to send powersave (NULL frame) notification to AP",
-+		"encrypt/decrypt on a packet has failed",
-+		"TKIP tx keys disabled",
-+		"TKIP rx keys disabled",
-+		"TKIP rx: key ID not found",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"TKIP IV value exceeds thresh"
-+	};
-+#endif
-+	u32 info_type, info_status;
-+
-+	info_type = readl(adev->info_area);
-+	info_status = (info_type >> 16);
-+	info_type = (u16)info_type;
-+
-+	/* inform fw that we have read this info message */
-+	writel(info_type | 0x00010000, adev->info_area);
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK);
-+	write_flush(adev);
-+
-+	log(L_CTL, "info_type:%04X info_status:%04X\n",
-+			info_type, info_status);
-+
-+	log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n",
-+		info_status, info_type,
-+		info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ?
-+				0 : info_type]
-+	);
-+}
-+
-+
-+static void
-+log_unusual_irq(u16 irqtype) {
-+	/*
-+	if (!printk_ratelimit())
-+		return;
-+	*/
-+
-+	printk("acx: got");
-+	if (irqtype & HOST_INT_RX_DATA) {
-+		printk(" Rx_Data");
-+	}
-+		/* HOST_INT_TX_COMPLETE   */
-+	if (irqtype & HOST_INT_TX_XFER) {
-+		printk(" Tx_Xfer");
-+	}
-+		/* HOST_INT_RX_COMPLETE   */
-+	if (irqtype & HOST_INT_DTIM) {
-+		printk(" DTIM");
-+	}
-+	if (irqtype & HOST_INT_BEACON) {
-+		printk(" Beacon");
-+	}
-+	if (irqtype & HOST_INT_TIMER) {
-+		log(L_IRQ, " Timer");
-+	}
-+	if (irqtype & HOST_INT_KEY_NOT_FOUND) {
-+		printk(" Key_Not_Found");
-+	}
-+	if (irqtype & HOST_INT_IV_ICV_FAILURE) {
-+		printk(" IV_ICV_Failure (crypto)");
-+	}
-+		/* HOST_INT_CMD_COMPLETE  */
-+		/* HOST_INT_INFO          */
-+	if (irqtype & HOST_INT_OVERFLOW) {
-+		printk(" Overflow");
-+	}
-+	if (irqtype & HOST_INT_PROCESS_ERROR) {
-+		printk(" Process_Error");
-+	}
-+		/* HOST_INT_SCAN_COMPLETE */
-+	if (irqtype & HOST_INT_FCS_THRESHOLD) {
-+		printk(" FCS_Threshold");
-+	}
-+	if (irqtype & HOST_INT_UNKNOWN) {
-+		printk(" Unknown");
-+	}
-+	printk(" IRQ(s)\n");
-+}
-+
-+
-+static void
-+update_link_quality_led(acx_device_t *adev)
-+{
-+	int qual;
-+
-+	qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise);
-+	if (qual > adev->brange_max_quality)
-+		qual = adev->brange_max_quality;
-+
-+	if (time_after(jiffies, adev->brange_time_last_state_change +
-+				(HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) {
-+		acxpci_l_power_led(adev, (adev->brange_last_state == 0));
-+		adev->brange_last_state ^= 1; /* toggle */
-+		adev->brange_time_last_state_change = jiffies;
-+	}
-+}
-+
-+
-+#define MAX_IRQLOOPS_PER_JIFFY  (20000/HZ) /* a la orinoco.c */
-+
-+static irqreturn_t
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxpci_i_interrupt(int irq, void *dev_id)
-+#else
-+acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	unsigned long flags;
-+	unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY;
-+	register u16 irqtype;
-+	u16 unmasked;
-+
-+	adev = ndev2adev((struct net_device*)dev_id);
-+
-+	/* LOCKING: can just spin_lock() since IRQs are disabled anyway.
-+	 * I am paranoid */
-+	acx_lock(adev, flags);
-+
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	if (unlikely(0xffff == unmasked)) {
-+		/* 0xffff value hints at missing hardware,
-+		 * so don't do anything.
-+		 * Not very clean, but other drivers do the same... */
-+		log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n");
-+		goto none;
-+	}
-+
-+	/* We will check only "interesting" IRQ types */
-+	irqtype = unmasked & ~adev->irq_mask;
-+	if (!irqtype) {
-+		/* We are on a shared IRQ line and it wasn't our IRQ */
-+		log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n",
-+			unmasked, adev->irq_mask);
-+		goto none;
-+	}
-+
-+	/* Done here because IRQ_NONEs taking three lines of log
-+	** drive me crazy */
-+	FN_ENTER;
-+
-+#define IRQ_ITERATE 1
-+#if IRQ_ITERATE
-+if (jiffies != adev->irq_last_jiffies) {
-+	adev->irq_loops_this_jiffy = 0;
-+	adev->irq_last_jiffies = jiffies;
-+}
-+
-+/* safety condition; we'll normally abort loop below
-+ * in case no IRQ type occurred */
-+while (likely(--irqcount)) {
-+#endif
-+	/* ACK all IRQs ASAP */
-+	write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff);
-+
-+	log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n",
-+				unmasked, adev->irq_mask, irqtype);
-+
-+	/* Handle most important IRQ types first */
-+	if (irqtype & HOST_INT_RX_COMPLETE) {
-+		log(L_IRQ, "got Rx_Complete IRQ\n");
-+		acxpci_l_process_rxdesc(adev);
-+	}
-+	if (irqtype & HOST_INT_TX_COMPLETE) {
-+		log(L_IRQ, "got Tx_Complete IRQ\n");
-+		/* don't clean up on each Tx complete, wait a bit
-+		 * unless we're going towards full, in which case
-+		 * we do it immediately, too (otherwise we might lockup
-+		 * with a full Tx buffer if we go into
-+		 * acxpci_l_clean_txdesc() at a time when we won't wakeup
-+		 * the net queue in there for some reason...) */
-+		if (adev->tx_free <= TX_START_CLEAN) {
-+#if TX_CLEANUP_IN_SOFTIRQ
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP);
-+#else
-+			acxpci_l_clean_txdesc(adev);
-+#endif
-+		}
-+	}
-+
-+	/* Less frequent ones */
-+	if (irqtype & (0
-+		| HOST_INT_CMD_COMPLETE
-+		| HOST_INT_INFO
-+		| HOST_INT_SCAN_COMPLETE
-+	)) {
-+		if (irqtype & HOST_INT_CMD_COMPLETE) {
-+			log(L_IRQ, "got Command_Complete IRQ\n");
-+			/* save the state for the running issue_cmd() */
-+			SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE);
-+		}
-+		if (irqtype & HOST_INT_INFO) {
-+			handle_info_irq(adev);
-+		}
-+		if (irqtype & HOST_INT_SCAN_COMPLETE) {
-+			log(L_IRQ, "got Scan_Complete IRQ\n");
-+			/* need to do that in process context */
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN);
-+			/* remember that fw is not scanning anymore */
-+			SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+		}
-+	}
-+
-+	/* These we just log, but either they happen rarely
-+	 * or we keep them masked out */
-+	if (irqtype & (0
-+		| HOST_INT_RX_DATA
-+		/* | HOST_INT_TX_COMPLETE   */
-+		| HOST_INT_TX_XFER
-+		/* | HOST_INT_RX_COMPLETE   */
-+		| HOST_INT_DTIM
-+		| HOST_INT_BEACON
-+		| HOST_INT_TIMER
-+		| HOST_INT_KEY_NOT_FOUND
-+		| HOST_INT_IV_ICV_FAILURE
-+		/* | HOST_INT_CMD_COMPLETE  */
-+		/* | HOST_INT_INFO          */
-+		| HOST_INT_OVERFLOW
-+		| HOST_INT_PROCESS_ERROR
-+		/* | HOST_INT_SCAN_COMPLETE */
-+		| HOST_INT_FCS_THRESHOLD
-+		| HOST_INT_UNKNOWN
-+	)) {
-+		log_unusual_irq(irqtype);
-+	}
-+
-+#if IRQ_ITERATE
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	irqtype = unmasked & ~adev->irq_mask;
-+	/* Bail out if no new IRQ bits or if all are masked out */
-+	if (!irqtype)
-+		break;
-+
-+	if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) {
-+		printk(KERN_ERR "acx: too many interrupts per jiffy!\n");
-+		/* Looks like card floods us with IRQs! Try to stop that */
-+		write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+		/* This will short-circuit all future attempts to handle IRQ.
-+		 * We cant do much more... */
-+		adev->irq_mask = 0;
-+		break;
-+	}
-+}
-+#endif
-+	/* Routine to perform blink with range */
-+	if (unlikely(adev->led_power == 2))
-+		update_link_quality_led(adev);
-+
-+/* handled: */
-+	/* write_flush(adev); - not needed, last op was read anyway */
-+	acx_unlock(adev, flags);
-+	FN_EXIT0;
-+	return IRQ_HANDLED;
-+
-+none:
-+	acx_unlock(adev, flags);
-+	return IRQ_NONE;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_l_power_led
-+*/
-+void
-+acxpci_l_power_led(acx_device_t *adev, int enable)
-+{
-+	u16 gpio_pled =	IS_ACX111(adev) ? 0x0040 : 0x0800;
-+
-+	/* A hack. Not moving message rate limiting to adev->xxx
-+	 * (it's only a debug message after all) */
-+	static int rate_limit = 0;
-+
-+	if (rate_limit++ < 3)
-+		log(L_IOCTL, "Please report in case toggling the power "
-+				"LED doesn't work for your card!\n");
-+	if (enable)
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled);
-+	else
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled);
-+}
-+
-+
-+/***********************************************************************
-+** Ioctls
-+*/
-+
-+/***********************************************************************
-+*/
-+int
-+acx111pci_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+#if ACX_DEBUG > 1
-+	acx_device_t *adev = ndev2adev(ndev);
-+	rxdesc_t *rxdesc;
-+	txdesc_t *txdesc;
-+	rxhostdesc_t *rxhostdesc;
-+	txhostdesc_t *txhostdesc;
-+	struct acx111_ie_memoryconfig memconf;
-+	struct acx111_ie_queueconfig queueconf;
-+	unsigned long flags;
-+	int i;
-+	char memmap[0x34];
-+	char rxconfig[0x8];
-+	char fcserror[0x8];
-+	char ratefallback[0x5];
-+
-+	if ( !(acx_debug & (L_IOCTL|L_DEBUG)) )
-+		return OK;
-+	/* using printk() since we checked debug flag already */
-+
-+	acx_sem_lock(adev);
-+
-+	if (!IS_ACX111(adev)) {
-+		printk("acx111-specific function called "
-+			"with non-acx111 chip, aborting\n");
-+		goto end_ok;
-+	}
-+
-+	/* get Acx111 Memory Configuration */
-+	memset(&memconf, 0, sizeof(memconf));
-+	/* BTW, fails with 12 (Write only) error code.
-+	** Retained for easy testing of issue_cmd error handling :) */
-+	acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG);
-+
-+	/* get Acx111 Queue Configuration */
-+	memset(&queueconf, 0, sizeof(queueconf));
-+	acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS);
-+
-+	/* get Acx111 Memory Map */
-+	memset(memmap, 0, sizeof(memmap));
-+	acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP);
-+
-+	/* get Acx111 Rx Config */
-+	memset(rxconfig, 0, sizeof(rxconfig));
-+	acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG);
-+
-+	/* get Acx111 fcs error count */
-+	memset(fcserror, 0, sizeof(fcserror));
-+	acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT);
-+
-+	/* get Acx111 rate fallback */
-+	memset(ratefallback, 0, sizeof(ratefallback));
-+	acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK);
-+
-+	/* force occurrence of a beacon interrupt */
-+	/* TODO: comment why is this necessary */
-+	write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON);
-+
-+	/* dump Acx111 Mem Configuration */
-+	printk("dump mem config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Number of stations: %1X\n"
-+		"Memory block size: %1X\n"
-+		"tx/rx memory block allocation: %1X\n"
-+		"count rx: %X / tx: %X queues\n"
-+		"options %1X\n"
-+		"fragmentation %1X\n"
-+		"Rx Queue 1 Count Descriptors: %X\n"
-+		"Rx Queue 1 Host Memory Start: %X\n"
-+		"Tx Queue 1 Count Descriptors: %X\n"
-+		"Tx Queue 1 Attributes: %X\n",
-+		memconf.len, (int) sizeof(memconf),
-+		memconf.no_of_stations,
-+		memconf.memory_block_size,
-+		memconf.tx_rx_memory_block_allocation,
-+		memconf.count_rx_queues, memconf.count_tx_queues,
-+		memconf.options,
-+		memconf.fragmentation,
-+		memconf.rx_queue1_count_descs,
-+	acx2cpu(memconf.rx_queue1_host_rx_start),
-+		memconf.tx_queue1_count_descs,
-+		memconf.tx_queue1_attributes);
-+
-+	/* dump Acx111 Queue Configuration */
-+	printk("dump queue head:\n"
-+		"data read: %d, struct size: %d\n"
-+		"tx_memory_block_address (from card): %X\n"
-+		"rx_memory_block_address (from card): %X\n"
-+		"rx1_queue address (from card): %X\n"
-+		"tx1_queue address (from card): %X\n"
-+		"tx1_queue attributes (from card): %X\n",
-+		queueconf.len, (int) sizeof(queueconf),
-+		queueconf.tx_memory_block_address,
-+		queueconf.rx_memory_block_address,
-+		queueconf.rx1_queue_address,
-+		queueconf.tx1_queue_address,
-+		queueconf.tx1_attributes);
-+
-+	/* dump Acx111 Mem Map */
-+	printk("dump mem map:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Code start: %X\n"
-+		"Code end: %X\n"
-+		"WEP default key start: %X\n"
-+		"WEP default key end: %X\n"
-+		"STA table start: %X\n"
-+		"STA table end: %X\n"
-+		"Packet template start: %X\n"
-+		"Packet template end: %X\n"
-+		"Queue memory start: %X\n"
-+		"Queue memory end: %X\n"
-+		"Packet memory pool start: %X\n"
-+		"Packet memory pool end: %X\n"
-+		"iobase: %p\n"
-+		"iobase2: %p\n",
-+		*((u16 *)&memmap[0x02]), (int) sizeof(memmap),
-+		*((u32 *)&memmap[0x04]),
-+		*((u32 *)&memmap[0x08]),
-+		*((u32 *)&memmap[0x0C]),
-+		*((u32 *)&memmap[0x10]),
-+		*((u32 *)&memmap[0x14]),
-+		*((u32 *)&memmap[0x18]),
-+		*((u32 *)&memmap[0x1C]),
-+		*((u32 *)&memmap[0x20]),
-+		*((u32 *)&memmap[0x24]),
-+		*((u32 *)&memmap[0x28]),
-+		*((u32 *)&memmap[0x2C]),
-+		*((u32 *)&memmap[0x30]),
-+		adev->iobase,
-+		adev->iobase2);
-+
-+	/* dump Acx111 Rx Config */
-+	printk("dump rx config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"rx config: %X\n"
-+		"rx filter config: %X\n",
-+		*((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig),
-+		*((u16 *)&rxconfig[0x04]),
-+		*((u16 *)&rxconfig[0x06]));
-+
-+	/* dump Acx111 fcs error */
-+	printk("dump fcserror:\n"
-+		"data read: %d, struct size: %d\n"
-+		"fcserrors: %X\n",
-+		*((u16 *)&fcserror[0x02]), (int) sizeof(fcserror),
-+		*((u32 *)&fcserror[0x04]));
-+
-+	/* dump Acx111 rate fallback */
-+	printk("dump rate fallback:\n"
-+		"data read: %d, struct size: %d\n"
-+		"ratefallback: %X\n",
-+		*((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback),
-+		*((u8 *)&ratefallback[0x04]));
-+
-+	/* protect against IRQ */
-+	acx_lock(adev, flags);
-+
-+	/* dump acx111 internal rx descriptor ring buffer */
-+	rxdesc = adev->rxdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump internal rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n"
-+			"RxStatus (dynamic) 0x%X\n"
-+			"Mod/Pre (dynamic) 0x%X\n",
-+			i,
-+			rxdesc,
-+			acx2cpu(rxdesc->pNextDesc),
-+			acx2cpu(rxdesc->ACXMemPtr),
-+			rxdesc->Ctl_8,
-+			rxdesc->rate,
-+			rxdesc->error,
-+			rxdesc->SNR);
-+		rxdesc++;
-+	}
-+
-+	/* dump host rx descriptor ring buffer */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxhostdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump host rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			rxhostdesc,
-+			acx2cpu(rxhostdesc->data_phy),
-+			rxhostdesc->data_offset,
-+			le16_to_cpu(rxhostdesc->Ctl_16),
-+			le16_to_cpu(rxhostdesc->length),
-+			acx2cpu(rxhostdesc->desc_phy_next),
-+			rxhostdesc->Status);
-+		rxhostdesc++;
-+	}
-+
-+	/* dump acx111 internal tx descriptor ring buffer */
-+	txdesc = adev->txdesc_start;
-+
-+	/* loop over complete transmit pool */
-+	if (txdesc) for (i = 0; i < TX_CNT; i++) {
-+		printk("\ndump internal txdesc %d:\n"
-+			"size 0x%X\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"host mem pointer (dynamic) 0x%X\n"
-+			"length (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"CTL2 (dynamic) 0x%X\n"
-+			"Status (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n",
-+			i,
-+			(int) sizeof(struct txdesc),
-+			txdesc,
-+			acx2cpu(txdesc->pNextDesc),
-+			acx2cpu(txdesc->AcxMemPtr),
-+			acx2cpu(txdesc->HostMemPtr),
-+			le16_to_cpu(txdesc->total_length),
-+			txdesc->Ctl_8,
-+			txdesc->Ctl2_8, txdesc->error,
-+			txdesc->u.r1.rate);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+
-+	/* dump host tx descriptor ring buffer */
-+
-+	txhostdesc = adev->txhostdesc_start;
-+
-+	/* loop over complete host send pool */
-+	if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) {
-+		printk("\ndump host txdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			txhostdesc,
-+			acx2cpu(txhostdesc->data_phy),
-+			txhostdesc->data_offset,
-+			le16_to_cpu(txhostdesc->Ctl_16),
-+			le16_to_cpu(txhostdesc->length),
-+			acx2cpu(txhostdesc->desc_phy_next),
-+			le32_to_cpu(txhostdesc->Status));
-+		txhostdesc++;
-+	}
-+
-+	/* write_reg16(adev, 0xb4, 0x4); */
-+
-+	acx_unlock(adev, flags);
-+end_ok:
-+
-+	acx_sem_unlock(adev);
-+#endif /* ACX_DEBUG */
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100pci_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	u16 gpio_old;
-+
-+	if (!IS_ACX100(adev)) {
-+		/* WARNING!!!
-+		 * Removing this check *might* damage
-+		 * hardware, since we're tweaking GPIOs here after all!!!
-+		 * You've been warned...
-+		 * WARNING!!! */
-+		printk("acx: sorry, setting bias level for non-acx100 "
-+			"is not supported yet\n");
-+		return OK;
-+	}
-+
-+	if (*extra > 7)	{
-+		printk("acx: invalid bias parameter, range is 0-7\n");
-+		return -EINVAL;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	/* Need to lock accesses to [IO_ACX_GPIO_OUT]:
-+	 * IRQ handler uses it to update LED */
-+	acx_lock(adev, flags);
-+	gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT);
-+	write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8));
-+	acx_unlock(adev, flags);
-+
-+	log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old);
-+	printk("%s: PHY power amplifier bias: old:%d, new:%d\n",
-+		ndev->name,
-+		(gpio_old & 0x0700) >> 8, (unsigned char)*extra);
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_l_alloc_tx
-+** Actually returns a txdesc_t* ptr
-+**
-+** FIXME: in case of fragments, should allocate multiple descrs
-+** after figuring out how many we need and whether we still have
-+** sufficiently many.
-+*/
-+tx_t*
-+acxpci_l_alloc_tx(acx_device_t *adev)
-+{
-+	struct txdesc *txdesc;
-+	unsigned head;
-+	u8 ctl8;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!adev->tx_free)) {
-+		printk("acx: BUG: no free txdesc left\n");
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	head = adev->tx_head;
-+	txdesc = get_txdesc(adev, head);
-+	ctl8 = txdesc->Ctl_8;
-+
-+	/* 2005-10-11: there were several bug reports on this happening
-+	** but now cause seems to be understood & fixed */
-+	if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_ACXDONE_HOSTOWN))) {
-+		/* whoops, descr at current index is not free, so probably
-+		 * ring buffer already full */
-+		printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find "
-+			"free txdesc\n", head, ctl8);
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/* Needed in case txdesc won't be eventually submitted for tx */
-+	txdesc->Ctl_8 = DESC_CTL_ACXDONE_HOSTOWN;
-+
-+	adev->tx_free--;
-+	log(L_BUFT, "tx: got desc %u, %u remain\n",
-+			head, adev->tx_free);
-+	/* Keep a few free descs between head and tail of tx ring.
-+	** It is not absolutely needed, just feels safer */
-+	if (adev->tx_free < TX_STOP_QUEUE) {
-+		log(L_BUF, "stop queue (%u tx desc left)\n",
-+				adev->tx_free);
-+		acx_stop_queue(adev->ndev, NULL);
-+	}
-+
-+	/* returning current descriptor, so advance to next free one */
-+	adev->tx_head = (head + 1) % TX_CNT;
-+end:
-+	FN_EXIT0;
-+
-+	return (tx_t*)txdesc;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void*
-+acxpci_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque)
-+{
-+	return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_l_tx_data
-+**
-+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx).
-+** Can be called from acx_i_start_xmit (data frames from net core).
-+**
-+** FIXME: in case of fragments, should loop over the number of
-+** pre-allocated tx descrs, properly setting up transfer data and
-+** CTL_xxx flags according to fragment number.
-+*/
-+void
-+acxpci_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len)
-+{
-+	txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+	txhostdesc_t *hostdesc1, *hostdesc2;
-+	client_t *clt;
-+	u16 rate_cur;
-+	u8 Ctl_8, Ctl2_8;
-+
-+	FN_ENTER;
-+
-+	/* fw doesn't tx such packets anyhow */
-+	if (unlikely(len < WLAN_HDR_A3_LEN))
-+		goto end;
-+
-+	hostdesc1 = get_txhostdesc(adev, txdesc);
-+	/* modify flag status in separate variable to be able to write it back
-+	 * in one big swoop later (also in order to have less device memory
-+	 * accesses) */
-+	Ctl_8 = txdesc->Ctl_8;
-+	Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */
-+
-+	hostdesc2 = hostdesc1 + 1;
-+
-+	/* DON'T simply set Ctl field to 0 here globally,
-+	 * it needs to maintain a consistent flag status (those are state flags!!),
-+	 * otherwise it may lead to severe disruption. Only set or reset particular
-+	 * flags at the exact moment this is needed... */
-+
-+	/* let chip do RTS/CTS handshaking before sending
-+	 * in case packet size exceeds threshold */
-+	if (len > adev->rts_threshold)
-+		SET_BIT(Ctl2_8, DESC_CTL2_RTS);
-+	else
-+		CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_3_AP:
-+		clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1);
-+		break;
-+	case ACX_MODE_2_STA:
-+		clt = adev->ap_client;
-+		break;
-+#if 0
-+/* testing was done on acx111: */
-+	case ACX_MODE_MONITOR:
-+		SET_BIT(Ctl2_8, 0
-+/* sends CTS to self before packet */
-+			+ DESC_CTL2_SEQ		/* don't increase sequence field */
-+/* not working (looks like good fcs is still added) */
-+			+ DESC_CTL2_FCS		/* don't add the FCS */
-+/* not tested */
-+			+ DESC_CTL2_MORE_FRAG
-+/* not tested */
-+			+ DESC_CTL2_RETRY	/* don't increase retry field */
-+/* not tested */
-+			+ DESC_CTL2_POWER	/* don't increase power mgmt. field */
-+/* no effect */
-+			+ DESC_CTL2_WEP		/* encrypt this frame */
-+/* not tested */
-+			+ DESC_CTL2_DUR		/* don't increase duration field */
-+			);
-+		/* fallthrough */
-+#endif
-+	default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */
-+		clt = NULL;
-+		break;
-+	}
-+
-+	rate_cur = clt ? clt->rate_cur : adev->rate_bcast;
-+	if (unlikely(!rate_cur)) {
-+		printk("acx: driver bug! bad ratemask\n");
-+		goto end;
-+	}
-+
-+	/* used in tx cleanup routine for auto rate and accounting: */
-+	put_txcr(adev, txdesc, clt, rate_cur);
-+
-+	txdesc->total_length = cpu_to_le16(len);
-+	hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN);
-+	if (IS_ACX111(adev)) {
-+		/* note that if !txdesc->do_auto, txrate->cur
-+		** has only one nonzero bit */
-+		txdesc->u.r2.rate111 = cpu_to_le16(
-+			rate_cur
-+			/* WARNING: I was never able to make it work with prism54 AP.
-+			** It was falling down to 1Mbit where shortpre is not applicable,
-+			** and not working at all at "5,11 basic rates only" setting.
-+			** I even didn't see tx packets in radio packet capture.
-+			** Disabled for now --vda */
-+			/*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */
-+			);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+			/* should add this to rate111 above as necessary */
-+			| (clt->pbcc511 ? RATE111_PBCC511 : 0)
-+#endif
-+		hostdesc1->length = cpu_to_le16(len);
-+	} else { /* ACX100 */
-+		u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100;
-+		txdesc->u.r1.rate = rate_100;
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+		if (clt->pbcc511) {
-+			if (n == RATE100_5 || n == RATE100_11)
-+				n |= RATE100_PBCC511;
-+		}
-+
-+		if (clt->shortpre && (clt->cur != RATE111_1))
-+			SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */
-+#endif
-+		/* set autodma and reclaim and 1st mpdu */
-+		SET_BIT(Ctl_8, DESC_CTL_AUTODMA | DESC_CTL_RECLAIM | DESC_CTL_FIRSTFRAG);
-+#if ACX_FRAGMENTATION
-+		/* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */
-+#endif
-+		hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN);
-+	}
-+	/* don't need to clean ack/rts statistics here, already
-+	 * done on descr cleanup */
-+
-+	/* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors
-+	 * are now owned by the acx100; do this as LAST operation */
-+	CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN);
-+	/* flush writes before we release hostdesc to the adapter here */
-+	wmb();
-+	CLEAR_BIT(hostdesc1->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN));
-+	CLEAR_BIT(hostdesc2->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN));
-+
-+	/* write back modified flags */
-+	txdesc->Ctl2_8 = Ctl2_8;
-+	txdesc->Ctl_8 = Ctl_8;
-+	/* unused: txdesc->tx_time = cpu_to_le32(jiffies); */
-+
-+	/* flush writes before we tell the adapter that it's its turn now */
-+	mmiowb();
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+	write_flush(adev);
-+
-+	/* log the packet content AFTER sending it,
-+	 * in order to not delay sending any further than absolutely needed
-+	 * Do separate logs for acx100/111 to have human-readable rates */
-+	if (unlikely(acx_debug & (L_XFER|L_DATA))) {
-+		u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc;
-+		if (IS_ACX111(adev))
-+			printk("tx: pkt (%s): len %d "
-+				"rate %04X%s status %u\n",
-+				acx_get_packet_type_string(le16_to_cpu(fc)), len,
-+				le16_to_cpu(txdesc->u.r2.rate111),
-+				(le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "",
-+				adev->status);
-+		else
-+			printk("tx: pkt (%s): len %d rate %03u%s status %u\n",
-+				acx_get_packet_type_string(fc), len,
-+				txdesc->u.r1.rate,
-+				(Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "",
-+				adev->status);
-+
-+		if (acx_debug & L_DATA) {
-+			printk("tx: 802.11 [%d]: ", len);
-+			acx_dump_bytes(hostdesc1->data, len);
-+		}
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_l_clean_txdesc
-+**
-+** This function resets the txdescs' status when the ACX100
-+** signals the TX done IRQ (txdescs have been processed), starting with
-+** the pool index of the descriptor which we would use next,
-+** in order to make sure that we can be as fast as possible
-+** in filling new txdescs.
-+** Everytime we get called we know where the next packet to be cleaned is.
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_txbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_txbuffer(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+
-+	/* no FN_ENTER here, we don't want that */
-+	/* no locks here, since it's entirely non-critical code */
-+	txdesc = adev->txdesc_start;
-+	if (unlikely(!txdesc)) return;
-+	printk("tx: desc->Ctl8's:");
-+	for (i = 0; i < TX_CNT; i++) {
-+		printk(" %02X", txdesc->Ctl_8);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+	printk("\n");
-+}
-+#endif
-+
-+
-+static void
-+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger)
-+{
-+	const char *err = "unknown error";
-+
-+	/* hmm, should we handle this as a mask
-+	 * of *several* bits?
-+	 * For now I think only caring about
-+	 * individual bits is ok... */
-+	switch (error) {
-+	case 0x01:
-+		err = "no Tx due to error in other fragment";
-+		adev->wstats.discard.fragment++;
-+		break;
-+	case 0x02:
-+		err = "Tx aborted";
-+		adev->stats.tx_aborted_errors++;
-+		break;
-+	case 0x04:
-+		err = "Tx desc wrong parameters";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x08:
-+		err = "WEP key not found";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x10:
-+		err = "MSDU lifetime timeout? - try changing "
-+				"'iwconfig retry lifetime XXX'";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x20:
-+		err = "excessive Tx retries due to either distance "
-+			"too high or unable to Tx or Tx frame error - "
-+			"try changing 'iwconfig txpower XXX' or "
-+			"'sens'itivity or 'retry'";
-+		adev->wstats.discard.retries++;
-+		/* Tx error 0x20 also seems to occur on
-+		 * overheating, so I'm not sure whether we
-+		 * actually want to do aggressive radio recalibration,
-+		 * since people maybe won't notice then that their hardware
-+		 * is slowly getting cooked...
-+		 * Or is it still a safe long distance from utter
-+		 * radio non-functionality despite many radio recalibs
-+		 * to final destructive overheating of the hardware?
-+		 * In this case we really should do recalib here...
-+		 * I guess the only way to find out is to do a
-+		 * potentially fatal self-experiment :-\
-+		 * Or maybe only recalib in case we're using Tx
-+		 * rate auto (on errors switching to lower speed
-+		 * --> less heat?) or 802.11 power save mode?
-+		 *
-+		 * ok, just do it. */
-+		if (++adev->retry_errors_msg_ratelimit % 4 == 0) {
-+			if (adev->retry_errors_msg_ratelimit <= 20) {
-+				printk("%s: several excessive Tx "
-+					"retry errors occurred, attempting "
-+					"to recalibrate radio. Radio "
-+					"drift might be caused by increasing "
-+					"card temperature, please check the card "
-+					"before it's too late!\n",
-+					adev->ndev->name);
-+				if (adev->retry_errors_msg_ratelimit == 20)
-+					printk("disabling above message\n");
-+			}
-+
-+			acx_schedule_task(adev,	ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+		}
-+		break;
-+	case 0x40:
-+		err = "Tx buffer overflow";
-+		adev->stats.tx_fifo_errors++;
-+		break;
-+	case 0x80:
-+		/* possibly ACPI C-state powersaving related!!!
-+		 * (DMA timeout due to excessively high wakeup
-+		 * latency after C-state activation!?)
-+		 * Disable C-State powersaving and try again,
-+		 * then PLEASE REPORT, I'm VERY interested in
-+		 * whether my theory is correct that this is
-+		 * actually the problem here.
-+		 * In that case, use new Linux idle wakeup latency
-+		 * requirements kernel API to prevent this issue. */
-+		err = "DMA error";
-+		adev->wstats.discard.misc++;
-+		break;
-+	}
-+	adev->stats.tx_errors++;
-+	if (adev->stats.tx_errors <= 20)
-+		printk("%s: tx error 0x%02X, buf %02u! (%s)\n",
-+				adev->ndev->name, error, finger, err);
-+	else
-+		printk("%s: tx error 0x%02X, buf %02u!\n",
-+				adev->ndev->name, error, finger);
-+}
-+
-+
-+unsigned int
-+acxpci_l_clean_txdesc(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	unsigned finger;
-+	int num_cleaned;
-+	u16 r111;
-+	u8 error, ack_failures, rts_failures, rts_ok, r100;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(acx_debug & L_DEBUG))
-+		log_txbuffer(adev);
-+
-+	log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail);
-+
-+	/* We know first descr which is not free yet. We advance it as far
-+	** as we see correct bits set in following descs (if next desc
-+	** is NOT free, we shouldn't advance at all). We know that in
-+	** front of tx_tail may be "holes" with isolated free descs.
-+	** We will catch up when all intermediate descs will be freed also */
-+
-+	finger = adev->tx_tail;
-+	num_cleaned = 0;
-+	while (likely(finger != adev->tx_head)) {
-+		txdesc = get_txdesc(adev, finger);
-+
-+		/* If we allocated txdesc on tx path but then decided
-+		** to NOT use it, then it will be left as a free "bubble"
-+		** in the "allocated for tx" part of the ring.
-+		** We may meet it on the next ring pass here. */
-+
-+		/* stop if not marked as "tx finished" and "host owned" */
-+		if ((txdesc->Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN)
-+					!= DESC_CTL_ACXDONE_HOSTOWN) {
-+			if (unlikely(!num_cleaned)) { /* maybe remove completely */
-+				log(L_BUFT, "clean_txdesc: tail isn't free. "
-+					"tail:%d head:%d\n",
-+					adev->tx_tail, adev->tx_head);
-+			}
-+			break;
-+		}
-+
-+		/* remember desc values... */
-+		error = txdesc->error;
-+		ack_failures = txdesc->ack_failures;
-+		rts_failures = txdesc->rts_failures;
-+		rts_ok = txdesc->rts_ok;
-+		r100 = txdesc->u.r1.rate;
-+		r111 = le16_to_cpu(txdesc->u.r2.rate111);
-+
-+		/* need to check for certain error conditions before we
-+		 * clean the descriptor: we still need valid descr data here */
-+		if (unlikely(0x30 & error)) {
-+			/* only send IWEVTXDROP in case of retry or lifetime exceeded;
-+			 * all other errors mean we screwed up locally */
-+			union iwreq_data wrqu;
-+			wlan_hdr_t *hdr;
-+			txhostdesc_t *hostdesc;
-+
-+			hostdesc = get_txhostdesc(adev, txdesc);
-+			hdr = (wlan_hdr_t *)hostdesc->data;
-+			MAC_COPY(wrqu.addr.sa_data, hdr->a1);
-+			wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL);
-+		}
-+
-+		/* ...and free the desc */
-+		txdesc->error = 0;
-+		txdesc->ack_failures = 0;
-+		txdesc->rts_failures = 0;
-+		txdesc->rts_ok = 0;
-+		/* signal host owning it LAST, since ACX already knows that this
-+		** descriptor is finished since it set Ctl_8 accordingly. */
-+		txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+
-+		adev->tx_free++;
-+		num_cleaned++;
-+
-+		if ((adev->tx_free >= TX_START_QUEUE)
-+		 && (adev->status == ACX_STATUS_4_ASSOCIATED)
-+		 && (acx_queue_stopped(adev->ndev))
-+		) {
-+			log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n",
-+					adev->tx_free);
-+			acx_wake_queue(adev->ndev, NULL);
-+		}
-+
-+		/* do error checking, rate handling and logging
-+		 * AFTER having done the work, it's faster */
-+
-+		/* do rate handling */
-+		if (adev->rate_auto) {
-+			struct client *clt = get_txc(adev, txdesc);
-+			if (clt) {
-+				u16 cur = get_txr(adev, txdesc);
-+				if (clt->rate_cur == cur) {
-+					acx_l_handle_txrate_auto(adev, clt,
-+						cur, /* intended rate */
-+						r100, r111, /* actually used rate */
-+						(error & 0x30), /* was there an error? */
-+						TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free);
-+				}
-+			}
-+		}
-+
-+		if (unlikely(error))
-+			handle_tx_error(adev, error, finger);
-+
-+		if (IS_ACX111(adev))
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n",
-+				finger, ack_failures, rts_failures, rts_ok, r111);
-+		else
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n",
-+				finger, ack_failures, rts_failures, rts_ok, r100);
-+
-+		/* update pointer for descr to be cleaned next */
-+		finger = (finger + 1) % TX_CNT;
-+	}
-+
-+	/* remember last position */
-+	adev->tx_tail = finger;
-+/* end: */
-+	FN_EXIT1(num_cleaned);
-+	return num_cleaned;
-+}
-+
-+/* clean *all* Tx descriptors, and regardless of their previous state.
-+ * Used for brute-force reset handling. */
-+void
-+acxpci_l_clean_txdesc_emergency(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < TX_CNT; i++) {
-+		txdesc = get_txdesc(adev, i);
-+
-+		/* free it */
-+		txdesc->ack_failures = 0;
-+		txdesc->rts_failures = 0;
-+		txdesc->rts_ok = 0;
-+		txdesc->error = 0;
-+		txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+	}
-+
-+	adev->tx_free = TX_CNT;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_create_tx_host_desc_queue
-+*/
-+
-+static void*
-+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg)
-+{
-+	void *ptr;
-+
-+	ptr = dma_alloc_coherent(adev->pdev ? &adev->pdev->dev : NULL,
-+			size, phy, GFP_KERNEL);
-+
-+	if (ptr) {
-+		log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n",
-+				msg, (int)size, ptr, (unsigned long long)*phy);
-+		memset(ptr, 0, size);
-+		return ptr;
-+	}
-+	printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n",
-+					msg, (int)size);
-+	return NULL;
-+}
-+
-+
-+static int
-+acxpci_s_create_tx_host_desc_queue(acx_device_t *adev)
-+{
-+	txhostdesc_t *hostdesc;
-+	u8 *txbuf;
-+	dma_addr_t hostdesc_phy;
-+	dma_addr_t txbuf_phy;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate TX buffer */
-+	adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS;
-+	adev->txbuf_start = allocate(adev, adev->txbuf_area_size,
-+			&adev->txbuf_startphy, "txbuf_start");
-+	if (!adev->txbuf_start)
-+		goto fail;
-+
-+	/* allocate the TX host descriptor queue pool */
-+	adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc);
-+	adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size,
-+			&adev->txhostdesc_startphy, "txhostdesc_start");
-+	if (!adev->txhostdesc_start)
-+		goto fail;
-+	/* check for proper alignment of TX host descriptor pool */
-+	if ((long) adev->txhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	hostdesc = adev->txhostdesc_start;
-+	hostdesc_phy = adev->txhostdesc_startphy;
-+	txbuf = adev->txbuf_start;
-+	txbuf_phy = adev->txbuf_startphy;
-+
-+#if 0
-+/* Each tx buffer is accessed by hardware via
-+** txdesc -> txhostdesc(s) -> txbuffer(s).
-+** We use only one txhostdesc per txdesc, but it looks like
-+** acx111 is buggy: it accesses second txhostdesc
-+** (via hostdesc.desc_phy_next field) even if
-+** txdesc->length == hostdesc->length and thus
-+** entire packet was placed into first txhostdesc.
-+** Due to this bug acx111 hangs unless second txhostdesc
-+** has le16_to_cpu(hostdesc.length) = 3 (or larger)
-+** Storing NULL into hostdesc.desc_phy_next
-+** doesn't seem to help.
-+**
-+** Update: although it worked on Xterasys XN-2522g
-+** with len=3 trick, WG311v2 is even more bogus, doesn't work.
-+** Keeping this code (#ifdef'ed out) for documentational purposes.
-+*/
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		hostdesc_phy += sizeof(*hostdesc);
-+		if (!(i & 1)) {
-+			hostdesc->data_phy = cpu2acx(txbuf_phy);
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN);
-+			/* hostdesc->length = ... */
-+			hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+			hostdesc->pNext = ptr2acx(NULL);
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			hostdesc->data = txbuf;
-+
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS;
-+			txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS;
-+		} else {
-+			/* hostdesc->data_phy = ... */
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			/* hostdesc->Ctl_16 = ... */
-+			hostdesc->length = cpu_to_le16(3); /* bug workaround */
-+			/* hostdesc->desc_phy_next = ... */
-+			/* hostdesc->pNext = ... */
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			/* hostdesc->data = ... */
-+		}
-+		hostdesc++;
-+	}
-+#endif
-+/* We initialize two hostdescs so that they point to adjacent
-+** memory areas. Thus txbuf is really just a contiguous memory area */
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		hostdesc_phy += sizeof(*hostdesc);
-+
-+		hostdesc->data_phy = cpu2acx(txbuf_phy);
-+		/* done by memset(0): hostdesc->data_offset = 0; */
-+		/* hostdesc->reserved = ... */
-+		hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN);
-+		/* hostdesc->length = ... */
-+		hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+		/* done by memset(0): hostdesc->pNext = ptr2acx(NULL); */
-+		/* hostdesc->Status = ... */
-+		/* ->data is a non-hardware field: */
-+		hostdesc->data = txbuf;
-+
-+		if (!(i & 1)) {
-+			txbuf += WLAN_HDR_A3_LEN;
-+			txbuf_phy += WLAN_HDR_A3_LEN;
-+		} else {
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN;
-+			txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN;
-+		}
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+	hostdesc->desc_phy_next = cpu2acx(adev->txhostdesc_startphy);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_tx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_s_create_rx_host_desc_queue
-+*/
-+/* the whole size of a data buffer (header plus data body)
-+ * plus 32 bytes safety offset at the end */
-+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32)
-+
-+static int
-+acxpci_s_create_rx_host_desc_queue(acx_device_t *adev)
-+{
-+	rxhostdesc_t *hostdesc;
-+	rxbuffer_t *rxbuf;
-+	dma_addr_t hostdesc_phy;
-+	dma_addr_t rxbuf_phy;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate the RX host descriptor queue pool */
-+	adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc);
-+	adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size,
-+			&adev->rxhostdesc_startphy, "rxhostdesc_start");
-+	if (!adev->rxhostdesc_start)
-+		goto fail;
-+	/* check for proper alignment of RX host descriptor pool */
-+	if ((long) adev->rxhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	/* allocate Rx buffer pool which will be used by the acx
-+	 * to store the whole content of the received frames in it */
-+	adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE;
-+	adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size,
-+			&adev->rxbuf_startphy, "rxbuf_start");
-+	if (!adev->rxbuf_start)
-+		goto fail;
-+
-+	rxbuf = adev->rxbuf_start;
-+	rxbuf_phy = adev->rxbuf_startphy;
-+	hostdesc = adev->rxhostdesc_start;
-+	hostdesc_phy = adev->rxhostdesc_startphy;
-+
-+	/* don't make any popular C programming pointer arithmetic mistakes
-+	 * here, otherwise I'll kill you...
-+	 * (and don't dare asking me why I'm warning you about that...) */
-+	for (i = 0; i < RX_CNT; i++) {
-+		hostdesc->data = rxbuf;
-+		hostdesc->data_phy = cpu2acx(rxbuf_phy);
-+		hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE);
-+		CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN));
-+		rxbuf++;
-+		rxbuf_phy += sizeof(*rxbuf);
-+		hostdesc_phy += sizeof(*hostdesc);
-+		hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+	hostdesc->desc_phy_next = cpu2acx(adev->rxhostdesc_startphy);
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_rx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_s_create_hostdesc_queues
-+*/
-+int
-+acxpci_s_create_hostdesc_queues(acx_device_t *adev)
-+{
-+	int result;
-+	result = acxpci_s_create_tx_host_desc_queue(adev);
-+	if (OK != result) return result;
-+	result = acxpci_s_create_rx_host_desc_queue(adev);
-+	return result;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_create_tx_desc_queue
-+*/
-+static void
-+acxpci_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start)
-+{
-+	txdesc_t *txdesc;
-+	txhostdesc_t *hostdesc;
-+	dma_addr_t hostmemptr;
-+	u32 mem_offs;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	if (IS_ACX100(adev))
-+		adev->txdesc_size = sizeof(*txdesc);
-+	else
-+		/* the acx111 txdesc is 4 bytes larger */
-+		adev->txdesc_size = sizeof(*txdesc) + 4;
-+
-+	adev->txdesc_start = (txdesc_t *) (adev->iobase2 + tx_queue_start);
-+
-+	log(L_DEBUG, "adev->iobase2=%p\n"
-+			"tx_queue_start=%08X\n"
-+			"adev->txdesc_start=%p\n",
-+			adev->iobase2,
-+			tx_queue_start,
-+			adev->txdesc_start);
-+
-+	adev->tx_free = TX_CNT;
-+	/* done by memset: adev->tx_head = 0; */
-+	/* done by memset: adev->tx_tail = 0; */
-+	txdesc = adev->txdesc_start;
-+	mem_offs = tx_queue_start;
-+	hostmemptr = adev->txhostdesc_startphy;
-+	hostdesc = adev->txhostdesc_start;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111 has a preinitialized Tx buffer! */
-+		/* loop over whole send pool */
-+		/* FIXME: do we have to do the hostmemptr stuff here?? */
-+		for (i = 0; i < TX_CNT; i++) {
-+			txdesc->HostMemPtr = ptr2acx(hostmemptr);
-+			txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+			/* reserve two (hdr desc and payload desc) */
-+			hostdesc += 2;
-+			hostmemptr += 2 * sizeof(*hostdesc);
-+			txdesc = advance_txdesc(adev, txdesc, 1);
-+		}
-+	} else {
-+		/* ACX100 Tx buffer needs to be initialized by us */
-+		/* clear whole send pool. sizeof is safe here (we are acx100) */
-+		memset(adev->txdesc_start, 0, TX_CNT * sizeof(*txdesc));
-+
-+		/* loop over whole send pool */
-+		for (i = 0; i < TX_CNT; i++) {
-+			log(L_DEBUG, "configure card tx descriptor: 0x%p, "
-+				"size: 0x%X\n", txdesc, adev->txdesc_size);
-+
-+			/* pointer to hostdesc memory */
-+			txdesc->HostMemPtr = ptr2acx(hostmemptr);
-+			/* initialise ctl */
-+			txdesc->Ctl_8 = ( DESC_CTL_HOSTOWN | DESC_CTL_RECLAIM
-+					| DESC_CTL_AUTODMA | DESC_CTL_FIRSTFRAG);
-+			/* done by memset(0): txdesc->Ctl2_8 = 0; */
-+			/* point to next txdesc */
-+			txdesc->pNextDesc = cpu2acx(mem_offs + adev->txdesc_size);
-+			/* reserve two (hdr desc and payload desc) */
-+			hostdesc += 2;
-+			hostmemptr += 2 * sizeof(*hostdesc);
-+			/* go to the next one */
-+			mem_offs += adev->txdesc_size;
-+			/* ++ is safe here (we are acx100) */
-+			txdesc++;
-+		}
-+		/* go back to the last one */
-+		txdesc--;
-+		/* and point to the first making it a ring buffer */
-+		txdesc->pNextDesc = cpu2acx(tx_queue_start);
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_create_rx_desc_queue
-+*/
-+static void
-+acxpci_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start)
-+{
-+	rxdesc_t *rxdesc;
-+	u32 mem_offs;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* done by memset: adev->rx_tail = 0; */
-+
-+	/* ACX111 doesn't need any further config: preconfigures itself.
-+	 * Simply print ring buffer for debugging */
-+	if (IS_ACX111(adev)) {
-+		/* rxdesc_start already set here */
-+
-+		adev->rxdesc_start = (rxdesc_t *) ((u8 *)adev->iobase2 + rx_queue_start);
-+
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc);
-+			rxdesc = adev->rxdesc_start = (rxdesc_t *)
-+				(adev->iobase2 + acx2cpu(rxdesc->pNextDesc));
-+		}
-+	} else {
-+		/* we didn't pre-calculate rxdesc_start in case of ACX100 */
-+		/* rxdesc_start should be right AFTER Tx pool */
-+		adev->rxdesc_start = (rxdesc_t *)
-+			((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t)));
-+		/* NB: sizeof(txdesc_t) above is valid because we know
-+		** we are in if (acx100) block. Beware of cut-n-pasting elsewhere!
-+		** acx111's txdesc is larger! */
-+
-+		memset(adev->rxdesc_start, 0, RX_CNT * sizeof(*rxdesc));
-+
-+		/* loop over whole receive pool */
-+		rxdesc = adev->rxdesc_start;
-+		mem_offs = rx_queue_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc);
-+			rxdesc->Ctl_8 = DESC_CTL_RECLAIM | DESC_CTL_AUTODMA;
-+			/* point to next rxdesc */
-+			rxdesc->pNextDesc = cpu2acx(mem_offs + sizeof(*rxdesc));
-+			/* go to the next one */
-+			mem_offs += sizeof(*rxdesc);
-+			rxdesc++;
-+		}
-+		/* go to the last one */
-+		rxdesc--;
-+
-+		/* and point to the first making it a ring buffer */
-+		rxdesc->pNextDesc = cpu2acx(rx_queue_start);
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_create_desc_queues
-+*/
-+void
-+acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start)
-+{
-+	acxpci_create_tx_desc_queue(adev, tx_queue_start);
-+	acxpci_create_rx_desc_queue(adev, rx_queue_start);
-+}
-+
-+
-+/***************************************************************
-+** acxpci_s_proc_diag_output
-+*/
-+char*
-+acxpci_s_proc_diag_output(char *p, acx_device_t *adev)
-+{
-+	const char *rtl, *thd, *ttl;
-+	rxhostdesc_t *rxhostdesc;
-+	txdesc_t *txdesc;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	p += sprintf(p, "** Rx buf **\n");
-+	rxhostdesc = adev->rxhostdesc_start;
-+	if (rxhostdesc) for (i = 0; i < RX_CNT; i++) {
-+		rtl = (i == adev->rx_tail) ? " [tail]" : "";
-+		if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)) )
-+			p += sprintf(p, "%02u FULL%s\n", i, rtl);
-+		else
-+			p += sprintf(p, "%02u empty%s\n", i, rtl);
-+		rxhostdesc++;
-+	}
-+	p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free,
-+				acx_queue_stopped(adev->ndev) ? "STOPPED" : "running");
-+	txdesc = adev->txdesc_start;
-+	if (txdesc) for (i = 0; i < TX_CNT; i++) {
-+		thd = (i == adev->tx_head) ? " [head]" : "";
-+		ttl = (i == adev->tx_tail) ? " [tail]" : "";
-+		if (txdesc->Ctl_8 & DESC_CTL_ACXDONE)
-+			p += sprintf(p, "%02u free (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl);
-+		else
-+			p += sprintf(p, "%02u tx   (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+	p += sprintf(p,
-+		"\n"
-+		"** PCI data **\n"
-+		"txbuf_start %p, txbuf_area_size %u, txbuf_startphy %08llx\n"
-+		"txdesc_size %u, txdesc_start %p\n"
-+		"txhostdesc_start %p, txhostdesc_area_size %u, txhostdesc_startphy %08llx\n"
-+		"rxdesc_start %p\n"
-+		"rxhostdesc_start %p, rxhostdesc_area_size %u, rxhostdesc_startphy %08llx\n"
-+		"rxbuf_start %p, rxbuf_area_size %u, rxbuf_startphy %08llx\n",
-+		adev->txbuf_start, adev->txbuf_area_size,
-+				(unsigned long long)adev->txbuf_startphy,
-+		adev->txdesc_size, adev->txdesc_start,
-+		adev->txhostdesc_start, adev->txhostdesc_area_size,
-+				(unsigned long long)adev->txhostdesc_startphy,
-+		adev->rxdesc_start,
-+		adev->rxhostdesc_start, adev->rxhostdesc_area_size,
-+				(unsigned long long)adev->rxhostdesc_startphy,
-+		adev->rxbuf_start, adev->rxbuf_area_size,
-+				(unsigned long long)adev->rxbuf_startphy);
-+
-+	FN_EXIT0;
-+	return p;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxpci_proc_eeprom_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < 0x400; i++) {
-+		acxpci_read_eeprom_byte(adev, i, p++);
-+	}
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acxpci_set_interrupt_mask(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev)) {
-+		adev->irq_mask = (u16) ~(0
-+				/* | HOST_INT_RX_DATA        */
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				| HOST_INT_RX_COMPLETE
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				| HOST_INT_IV_ICV_FAILURE
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				/* | HOST_INT_OVERFLOW       */
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				| HOST_INT_FCS_THRESHOLD
-+				/* | HOST_INT_UNKNOWN        */
-+				);
-+		/* Or else acx100 won't signal cmd completion, right? */
-+		adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */
-+	} else {
-+		adev->irq_mask = (u16) ~(0
-+				/* | HOST_INT_RX_DATA        */
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				| HOST_INT_RX_COMPLETE
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				/* | HOST_INT_IV_ICV_FAILURE */
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				/* | HOST_INT_OVERFLOW       */
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				/* | HOST_INT_FCS_THRESHOLD  */
-+				/* | HOST_INT_UNKNOWN        */
-+				);
-+		adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	/* since it can be assumed that at least the Maxim radio has a
-+	 * maximum power output of 20dBm and since it also can be
-+	 * assumed that these values drive the DAC responsible for
-+	 * setting the linear Tx level, I'd guess that these values
-+	 * should be the corresponding linear values for a dBm value,
-+	 * in other words: calculate the values from that formula:
-+	 * Y [dBm] = 10 * log (X [mW])
-+	 * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm)
-+	 * and you're done...
-+	 * Hopefully that's ok, but you never know if we're actually
-+	 * right... (especially since Windows XP doesn't seem to show
-+	 * actual Tx dBm values :-P) */
-+
-+	/* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the
-+	 * values are EXACTLY mW!!! Not sure about RFMD and others,
-+	 * though... */
-+	static const u8 dbm2val_maxim[21] = {
-+		63, 63, 63, 62,
-+		61, 61, 60, 60,
-+		59, 58, 57, 55,
-+		53, 50, 47, 43,
-+		38, 31, 23, 13,
-+		0
-+	};
-+	static const u8 dbm2val_rfmd[21] = {
-+		 0,  0,  0,  1,
-+		 2,  2,  3,  3,
-+		 4,  5,  6,  8,
-+		10, 13, 16, 20,
-+		25, 32, 41, 50,
-+		63
-+	};
-+	const u8 *table;
-+
-+	switch (adev->radio_type) {
-+	case RADIO_MAXIM_0D:
-+		table = &dbm2val_maxim[0];
-+		break;
-+	case RADIO_RFMD_11:
-+	case RADIO_RALINK_15:
-+		table = &dbm2val_rfmd[0];
-+		break;
-+	default:
-+		printk("%s: unknown/unsupported radio type, "
-+			"cannot modify tx power level yet!\n",
-+				adev->ndev->name);
-+		return NOT_OK;
-+	}
-+	printk("%s: changing radio power level to %u dBm (%u)\n",
-+			adev->ndev->name, level_dbm, table[level_dbm]);
-+	acxpci_s_write_phy_reg(adev, 0x11, table[level_dbm]);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** Data for init_module/cleanup_module
-+*/
-+static const struct pci_device_id
-+acxpci_id_tbl[] __devinitdata = {
-+	{
-+		.vendor = PCI_VENDOR_ID_TI,
-+		.device = PCI_DEVICE_ID_TI_TNETW1100A,
-+		.subvendor = PCI_ANY_ID,
-+		.subdevice = PCI_ANY_ID,
-+		.driver_data = CHIPTYPE_ACX100,
-+	},
-+	{
-+		.vendor = PCI_VENDOR_ID_TI,
-+		.device = PCI_DEVICE_ID_TI_TNETW1100B,
-+		.subvendor = PCI_ANY_ID,
-+		.subdevice = PCI_ANY_ID,
-+		.driver_data = CHIPTYPE_ACX100,
-+	},
-+	{
-+		.vendor = PCI_VENDOR_ID_TI,
-+		.device = PCI_DEVICE_ID_TI_TNETW1130,
-+		.subvendor = PCI_ANY_ID,
-+		.subdevice = PCI_ANY_ID,
-+		.driver_data = CHIPTYPE_ACX111,
-+	},
-+	{
-+		.vendor = 0,
-+		.device = 0,
-+		.subvendor = 0,
-+		.subdevice = 0,
-+		.driver_data = 0,
-+	}
-+};
-+
-+MODULE_DEVICE_TABLE(pci, acxpci_id_tbl);
-+
-+/* FIXME: checks should be removed once driver is included in the kernel */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11)
-+/* pci_name() got introduced at start of 2.6.x,
-+ * got mandatory (slot_name member removed) in 2.6.11-bk1 */
-+#define pci_name(x) x->slot_name
-+#endif
-+
-+static struct pci_driver
-+acxpci_drv_id = {
-+	.name        = "acx_pci",
-+	.id_table    = acxpci_id_tbl,
-+	.probe       = acxpci_e_probe,
-+	.remove      = __devexit_p(acxpci_e_remove),
-+#ifdef CONFIG_PM
-+	.suspend     = acxpci_e_suspend,
-+	.resume      = acxpci_e_resume
-+#endif /* CONFIG_PM */
-+};
-+
-+
-+/***********************************************************************
-+** acxpci_e_init_module
-+**
-+** Module initialization routine, called once at module load time
-+*/
-+int __init
-+acxpci_e_init_module(void)
-+{
-+	int res;
-+
-+	FN_ENTER;
-+
-+#if (ACX_IO_WIDTH==32)
-+	printk("acx: compiled to use 32bit I/O access. "
-+		"I/O timing issues might occur, such as "
-+		"non-working firmware upload. Report them\n");
-+#else
-+	printk("acx: compiled to use 16bit I/O access only "
-+		"(compatibility mode)\n");
-+#endif
-+
-+#ifdef __LITTLE_ENDIAN
-+#define ENDIANNESS_STRING "running on a little-endian CPU\n"
-+#else
-+#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n"
-+#endif
-+	log(L_INIT,
-+		ENDIANNESS_STRING
-+		"PCI module " ACX_RELEASE " initialized, "
-+		"waiting for cards to probe...\n"
-+	);
-+
-+	res = pci_register_driver(&acxpci_drv_id);
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_cleanup_module
-+**
-+** Called at module unload time. This is our last chance to
-+** clean up after ourselves.
-+*/
-+void __exit
-+acxpci_e_cleanup_module(void)
-+{
-+	FN_ENTER;
-+
-+	pci_unregister_driver(&acxpci_drv_id);
-+
-+	FN_EXIT0;
-+}
-Index: linux-2.6.23/drivers/net/wireless/acx/rx3000_acx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/rx3000_acx.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,110 @@
-+/*
-+ * WLAN (TI TNETW1100B) support in the HP iPAQ RX3000
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ * Copyright (c) 2006 Roman Moravcik
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * Based on hx4700_acx.c
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dpm.h>
-+#include <linux/leds.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/regs-gpio.h>
-+#include <linux/mfd/asic3_base.h>
-+#include <asm/arch/rx3000.h>
-+#include <asm/arch/rx3000-asic3.h>
-+#include <asm/io.h>
-+
-+#include "acx_hw.h"
-+
-+extern struct platform_device s3c_device_asic3;
-+
-+static int rx3000_wlan_start(void)
-+{
-+	DPM_DEBUG("rx3000_acx: Turning on\n");
-+	asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3);
-+	mdelay(20);
-+	asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, ASIC3_GPC13);
-+	mdelay(20);
-+	asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, ASIC3_GPC11);
-+	mdelay(100);
-+	asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3);
-+	mdelay(20);
-+	s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_nGCS4);        
-+	mdelay(100);
-+	s3c2410_gpio_setpin(S3C2410_GPA11, 0);
-+	mdelay(50);
-+	s3c2410_gpio_setpin(S3C2410_GPA11, 1);
-+	led_trigger_event_shared(rx3000_radio_trig, LED_FULL);
-+	return 0;
-+}
-+
-+static int rx3000_wlan_stop(void)
-+{
-+	DPM_DEBUG("rx3000_acx: Turning off\n");
-+	s3c2410_gpio_setpin(S3C2410_GPA15, 1);
-+	s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_OUT);
-+	asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, 0);
-+	asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, 0);
-+	asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, 0);
-+	led_trigger_event_shared(rx3000_radio_trig, LED_OFF);
-+	return 0;
-+}
-+
-+static struct resource acx_resources[] = {
-+	[0] = {
-+		.start	= RX3000_PA_WLAN,
-+		.end	= RX3000_PA_WLAN + 0x20,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_EINT16,
-+		.end	= IRQ_EINT16,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct acx_hardware_data acx_data = {
-+	.start_hw	= rx3000_wlan_start,
-+	.stop_hw	= rx3000_wlan_stop,
-+};
-+
-+static struct platform_device acx_device = {
-+	.name	= "acx-mem",
-+	.dev	= {
-+		.platform_data = &acx_data,
-+	},
-+	.num_resources	= ARRAY_SIZE(acx_resources),
-+	.resource	= acx_resources,
-+};
-+
-+static int __init rx3000_wlan_init(void)
-+{
-+	printk("rx3000_wlan_init: acx-mem platform_device_register\n");
-+	return platform_device_register(&acx_device);
-+}
-+
-+
-+static void __exit rx3000_wlan_exit(void)
-+{
-+	platform_device_unregister(&acx_device);
-+}
-+
-+module_init(rx3000_wlan_init);
-+module_exit(rx3000_wlan_exit);
-+
-+MODULE_AUTHOR("Todd Blumer <todd@sdgsystems.com>, Roman Moravcik <roman.moravcik@gmail.com>");
-+MODULE_DESCRIPTION("WLAN driver for HP iPAQ RX3000");
-+MODULE_LICENSE("GPL");
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/setrate.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/setrate.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,213 @@
-+/* TODO: stop #including, move into wireless.c
-+ * until then, keep in sync copies in prism54/ and acx/ dirs
-+ * code+data size: less than 1k */
-+
-+enum {
-+	DOT11_RATE_1,
-+	DOT11_RATE_2,
-+	DOT11_RATE_5,
-+	DOT11_RATE_11,
-+	DOT11_RATE_22,
-+	DOT11_RATE_33,
-+	DOT11_RATE_6,
-+	DOT11_RATE_9,
-+	DOT11_RATE_12,
-+	DOT11_RATE_18,
-+	DOT11_RATE_24,
-+	DOT11_RATE_36,
-+	DOT11_RATE_48,
-+	DOT11_RATE_54
-+};
-+enum {
-+	DOT11_MOD_DBPSK,
-+	DOT11_MOD_DQPSK,
-+	DOT11_MOD_CCK,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_CCKOFDM,
-+	DOT11_MOD_PBCC
-+};
-+static const u8 ratelist[] = { 1,2,5,11,22,33,6,9,12,18,24,36,48,54 };
-+static const u8 dot11ratebyte[] = { 1*2,2*2,11,11*2,22*2,33*2,6*2,9*2,12*2,18*2,24*2,36*2,48*2,54*2 };
-+static const u8 default_modulation[] = {
-+	DOT11_MOD_DBPSK,
-+	DOT11_MOD_DQPSK,
-+	DOT11_MOD_CCK,
-+	DOT11_MOD_CCK,
-+	DOT11_MOD_PBCC,
-+	DOT11_MOD_PBCC,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM
-+};
-+
-+static /* TODO: remove 'static' when moved to wireless.c */
-+int
-+rate_mbit2enum(int n) {
-+	int i=0;
-+	while(i<sizeof(ratelist)) {
-+		if(n==ratelist[i]) return i;
-+		i++;
-+	}
-+	return -EINVAL;
-+}
-+
-+static int
-+get_modulation(int r_enum, char suffix) {
-+	if(suffix==',' || suffix==' ' || suffix=='\0') {
-+		/* could shorten default_mod by 8 bytes:
-+		if(r_enum>=DOT11_RATE_6) return DOT11_MOD_OFDM; */
-+		return default_modulation[r_enum];
-+	}
-+	if(suffix=='c') {
-+		if(r_enum<DOT11_RATE_5 || r_enum>DOT11_RATE_11) return -EINVAL;
-+		return DOT11_MOD_CCK;
-+	}
-+	if(suffix=='p') {
-+		if(r_enum<DOT11_RATE_5 || r_enum>DOT11_RATE_33) return -EINVAL;
-+		return DOT11_MOD_PBCC;
-+	}
-+	if(suffix=='o') {
-+		if(r_enum<DOT11_RATE_6) return -EINVAL;
-+		return DOT11_MOD_OFDM;
-+	}
-+	if(suffix=='d') {
-+		if(r_enum<DOT11_RATE_6) return -EINVAL;
-+		return DOT11_MOD_CCKOFDM;
-+	}
-+	return -EINVAL;
-+}
-+
-+#ifdef UNUSED
-+static int
-+fill_ratevector(const char **pstr, u8 *vector, int size,
-+		int (*supported)(int mbit, int mod, void *opaque), void *opaque, int or_mask)
-+{
-+	unsigned long rate_mbit;
-+	int rate_enum,mod;
-+	const char *str = *pstr;
-+	char c;
-+
-+	do {
-+		rate_mbit = simple_strtoul(str, (char**)&str, 10);
-+		if(rate_mbit>INT_MAX) return -EINVAL;
-+
-+		rate_enum = rate_mbit2enum(rate_mbit);
-+		if(rate_enum<0) return rate_enum;
-+
-+		c = *str;
-+		mod = get_modulation(rate_enum, c);
-+		if(mod<0) return mod;
-+
-+		if(c>='a' && c<='z') c = *++str;
-+		if(c!=',' && c!=' ' && c!='\0') return -EINVAL;
-+
-+		if(supported) {
-+			int r = supported(rate_mbit, mod, opaque);
-+			if(r) return r;
-+		}
-+
-+		*vector++ = dot11ratebyte[rate_enum] | or_mask;
-+
-+		size--;
-+		str++;
-+	} while(size>0 && c==',');
-+
-+	if(size<1) return -E2BIG;
-+	*vector=0; /* TODO: sort, remove dups? */
-+
-+	*pstr = str-1;
-+	return 0;
-+}
-+
-+static /* TODO: remove 'static' when moved to wireless.c */
-+int
-+fill_ratevectors(const char *str, u8 *brate, u8 *orate, int size,
-+		int (*supported)(int mbit, int mod, void *opaque), void *opaque)
-+{
-+	int r;
-+
-+	r = fill_ratevector(&str, brate, size, supported, opaque, 0x80);
-+	if(r) return r;
-+
-+	orate[0] = 0;
-+	if(*str==' ') {
-+		str++;
-+		r = fill_ratevector(&str, orate, size, supported, opaque, 0);
-+		if(r) return r;
-+		/* TODO: sanitize, e.g. remove/error on rates already in basic rate set? */
-+	}
-+	if(*str)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+#endif
-+
-+/* TODO: use u64 masks? */
-+
-+static int
-+fill_ratemask(const char **pstr, u32* mask,
-+		int (*supported)(int mbit, int mod,void *opaque),
-+		u32 (*gen_mask)(int mbit, int mod,void *opaque),
-+		void *opaque)
-+{
-+	unsigned long rate_mbit;
-+	int rate_enum,mod;
-+	u32 m = 0;
-+	const char *str = *pstr;
-+	char c;
-+
-+	do {
-+		rate_mbit = simple_strtoul(str, (char**)&str, 10);
-+		if(rate_mbit>INT_MAX) return -EINVAL;
-+
-+		rate_enum = rate_mbit2enum(rate_mbit);
-+		if(rate_enum<0) return rate_enum;
-+
-+		c = *str;
-+		mod = get_modulation(rate_enum, c);
-+		if(mod<0) return mod;
-+
-+		if(c>='a' && c<='z') c = *++str;
-+		if(c!=',' && c!=' ' && c!='\0') return -EINVAL;
-+
-+		if(supported) {
-+			int r = supported(rate_mbit, mod, opaque);
-+			if(r) return r;
-+		}
-+
-+		m |= gen_mask(rate_mbit, mod, opaque);
-+		str++;
-+	} while(c==',');
-+
-+	*pstr = str-1;
-+	*mask |= m;
-+	return 0;
-+}
-+
-+static /* TODO: remove 'static' when moved to wireless.c */
-+int
-+fill_ratemasks(const char *str, u32 *bmask, u32 *omask,
-+		int (*supported)(int mbit, int mod,void *opaque),
-+		u32 (*gen_mask)(int mbit, int mod,void *opaque),
-+		void *opaque)
-+{
-+	int r;
-+
-+	r = fill_ratemask(&str, bmask, supported, gen_mask, opaque);
-+	if(r) return r;
-+
-+	if(*str==' ') {
-+		str++;
-+		r = fill_ratemask(&str, omask, supported, gen_mask, opaque);
-+		if(r) return r;
-+	}
-+	if(*str)
-+		return -EINVAL;
-+	return 0;
-+}
-Index: linux-2.6.23/drivers/net/wireless/acx/usb.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/usb.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,1922 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** USB support for TI ACX100 based devices. Many parts are taken from
-+** the PCI driver.
-+**
-+** Authors:
-+**  Martin Wawro <martin.wawro AT uni-dortmund.de>
-+**  Andreas Mohr <andi AT lisas.de>
-+**
-+** LOCKING
-+** callback functions called by USB core are running in interrupt context
-+** and thus have names with _i_.
-+*/
-+#define ACX_USB 1
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/types.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/kernel.h>
-+#include <linux/usb.h>
-+#include <linux/netdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/etherdevice.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+#include <linux/vmalloc.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+/* number of endpoints of an interface */
-+#define NUM_EP(intf) (intf)->altsetting[0].desc.bNumEndpoints
-+#define EP(intf, nr) (intf)->altsetting[0].endpoint[(nr)].desc
-+#define GET_DEV(udev) usb_get_dev((udev))
-+#define PUT_DEV(udev) usb_put_dev((udev))
-+#define SET_NETDEV_OWNER(ndev, owner) /* not needed anymore ??? */
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14)
-+/* removed in 2.6.14. We will use fake value for now */
-+#define URB_ASYNC_UNLINK 0
-+#endif
-+
-+
-+/***********************************************************************
-+*/
-+/* ACX100 (TNETW1100) USB device: D-Link DWL-120+ */
-+#define ACX100_VENDOR_ID 0x2001
-+#define ACX100_PRODUCT_ID_UNBOOTED 0x3B01
-+#define ACX100_PRODUCT_ID_BOOTED 0x3B00
-+
-+/* TNETW1450 USB devices */
-+#define VENDOR_ID_DLINK		0x07b8 /* D-Link Corp. */
-+#define PRODUCT_ID_WUG2400	0xb21a /* AboCom WUG2400 or SafeCom SWLUT-54125 */
-+#define VENDOR_ID_AVM_GMBH	0x057c
-+#define PRODUCT_ID_AVM_WLAN_USB	0x5601
-+#define PRODUCT_ID_AVM_WLAN_USB_si	0x6201 /* "self install" named Version: driver kills kernel on inbound scans from fritz box ???  */
-+#define VENDOR_ID_ZCOM		0x0cde
-+#define PRODUCT_ID_ZCOM_XG750	0x0017 /* not tested yet */
-+#define VENDOR_ID_TI		0x0451
-+#define PRODUCT_ID_TI_UNKNOWN	0x60c5 /* not tested yet */
-+
-+#define ACX_USB_CTRL_TIMEOUT	5500   /* steps in ms */
-+
-+/* Buffer size for fw upload, same for both ACX100 USB and TNETW1450 */
-+#define USB_RWMEM_MAXLEN	2048
-+
-+/* The number of bulk URBs to use */
-+#define ACX_TX_URB_CNT		8
-+#define ACX_RX_URB_CNT		2
-+
-+/* Should be sent to the bulkout endpoint */
-+#define ACX_USB_REQ_UPLOAD_FW	0x10
-+#define ACX_USB_REQ_ACK_CS	0x11
-+#define ACX_USB_REQ_CMD		0x12
-+
-+/***********************************************************************
-+** Prototypes
-+*/
-+static int acxusb_e_probe(struct usb_interface *, const struct usb_device_id *);
-+static void acxusb_e_disconnect(struct usb_interface *);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+static void acxusb_i_complete_tx(struct urb *);
-+static void acxusb_i_complete_rx(struct urb *);
-+#else
-+static void acxusb_i_complete_tx(struct urb *, struct pt_regs *);
-+static void acxusb_i_complete_rx(struct urb *, struct pt_regs *);
-+#endif
-+static int acxusb_e_open(struct net_device *);
-+static int acxusb_e_close(struct net_device *);
-+static void acxusb_i_set_rx_mode(struct net_device *);
-+static int acxusb_boot(struct usb_device *, int is_tnetw1450, int *radio_type);
-+
-+static void acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx);
-+
-+static void acxusb_i_tx_timeout(struct net_device *);
-+
-+/* static void dump_device(struct usb_device *); */
-+/* static void dump_device_descriptor(struct usb_device_descriptor *); */
-+/* static void dump_config_descriptor(struct usb_config_descriptor *); */
-+
-+/***********************************************************************
-+** Module Data
-+*/
-+#define TXBUFSIZE sizeof(usb_txbuffer_t)
-+/*
-+ * Now, this is just plain lying, but the device insists in giving us
-+ * huge packets. We supply extra space after rxbuffer. Need to understand
-+ * it better...
-+ */
-+#define RXBUFSIZE (sizeof(rxbuffer_t) + \
-+		   (sizeof(usb_rx_t) - sizeof(struct usb_rx_plain)))
-+
-+static const struct usb_device_id
-+acxusb_ids[] = {
-+	{ USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_BOOTED) },
-+	{ USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_UNBOOTED) },
-+	{ USB_DEVICE(VENDOR_ID_DLINK, PRODUCT_ID_WUG2400) },
-+	{ USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB) },
-+	{ USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB_si) },
-+	{ USB_DEVICE(VENDOR_ID_ZCOM, PRODUCT_ID_ZCOM_XG750) },
-+	{ USB_DEVICE(VENDOR_ID_TI, PRODUCT_ID_TI_UNKNOWN) },
-+	{}
-+};
-+
-+MODULE_DEVICE_TABLE(usb, acxusb_ids);
-+
-+/* USB driver data structure as required by the kernel's USB core */
-+static struct usb_driver
-+acxusb_driver = {
-+	.name = "acx_usb",
-+	.probe = acxusb_e_probe,
-+	.disconnect = acxusb_e_disconnect,
-+	.id_table = acxusb_ids
-+};
-+
-+
-+/***********************************************************************
-+** USB helper
-+**
-+** ldd3 ch13 says:
-+** When the function is usb_kill_urb, the urb lifecycle is stopped. This
-+** function is usually used when the device is disconnected from the system,
-+** in the disconnect callback. For some drivers, the usb_unlink_urb function
-+** should be used to tell the USB core to stop an urb. This function does not
-+** wait for the urb to be fully stopped before returning to the caller.
-+** This is useful for stoppingthe urb while in an interrupt handler or when
-+** a spinlock is held, as waiting for a urb to fully stop requires the ability
-+** for the USB core to put the calling process to sleep. This function requires
-+** that the URB_ASYNC_UNLINK flag value be set in the urb that is being asked
-+** to be stopped in order to work properly.
-+**
-+** (URB_ASYNC_UNLINK is obsolete, usb_unlink_urb will always be
-+** asynchronous while usb_kill_urb is synchronous and should be called
-+** directly (drivers/usb/core/urb.c))
-+**
-+** In light of this, timeout is just for paranoid reasons...
-+*
-+* Actually, it's useful for debugging. If we reach timeout, we're doing
-+* something wrong with the urbs.
-+*/
-+static void
-+acxusb_unlink_urb(struct urb* urb)
-+{
-+	if (!urb)
-+		return;
-+
-+	if (urb->status == -EINPROGRESS) {
-+		int timeout = 10;
-+
-+		usb_unlink_urb(urb);
-+		while (--timeout && urb->status == -EINPROGRESS) {
-+			mdelay(1);
-+		}
-+		if (!timeout) {
-+			printk("acx_usb: urb unlink timeout!\n");
-+		}
-+	}
-+}
-+
-+
-+/***********************************************************************
-+** EEPROM and PHY read/write helpers
-+*/
-+/***********************************************************************
-+** acxusb_s_read_phy_reg
-+*/
-+int
-+acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	/* mem_read_write_t mem; */
-+
-+	FN_ENTER;
-+
-+	printk("%s doesn't seem to work yet, disabled.\n", __func__);
-+
-+	/*
-+	mem.addr = cpu_to_le16(reg);
-+	mem.type = cpu_to_le16(0x82);
-+	mem.len = cpu_to_le32(4);
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_READ, &mem, sizeof(mem));
-+	*charbuf = mem.data;
-+	log(L_DEBUG, "read radio PHY[0x%04X]=0x%02X\n", reg, *charbuf);
-+	*/
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+	mem_read_write_t mem;
-+
-+	FN_ENTER;
-+
-+	mem.addr = cpu_to_le16(reg);
-+	mem.type = cpu_to_le16(0x82);
-+	mem.len = cpu_to_le32(4);
-+	mem.data = value;
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_WRITE, &mem, sizeof(mem));
-+	log(L_DEBUG, "write radio PHY[0x%04X]=0x%02X\n", reg, value);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_s_issue_cmd_timeo
-+** Excecutes a command in the command mailbox
-+**
-+** buffer = a pointer to the data.
-+** The data must not include 4 byte command header
-+*/
-+
-+/* TODO: ideally we shall always know how much we need
-+** and this shall be 0 */
-+#define BOGUS_SAFETY_PADDING 0x40
-+
-+#undef FUNC
-+#define FUNC "issue_cmd"
-+
-+#if !ACX_DEBUG
-+int
-+acxusb_s_issue_cmd_timeo(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned timeout)
-+{
-+#else
-+int
-+acxusb_s_issue_cmd_timeo_debug(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned timeout,
-+	const char* cmdstr)
-+{
-+#endif
-+	/* USB ignores timeout param */
-+
-+	struct usb_device *usbdev;
-+	struct {
-+		u16	cmd;
-+		u16	status;
-+		u8	data[1];
-+	} ACX_PACKED *loc;
-+	const char *devname;
-+	int acklen, blocklen, inpipe, outpipe;
-+	int cmd_status;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	devname = adev->ndev->name;
-+	/* no "wlan%%d: ..." please */
-+	if (!devname || !devname[0] || devname[4]=='%')
-+		devname = "acx";
-+
-+	log(L_CTL, FUNC"(cmd:%s,buflen:%u,type:0x%04X)\n",
-+		cmdstr, buflen,
-+		buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1);
-+
-+	loc = kmalloc(buflen + 4 + BOGUS_SAFETY_PADDING, GFP_KERNEL);
-+	if (!loc) {
-+		printk("%s: "FUNC"(): no memory for data buffer\n", devname);
-+		goto bad;
-+	}
-+
-+	/* get context from acx_device */
-+	usbdev = adev->usbdev;
-+
-+	/* check which kind of command was issued */
-+	loc->cmd = cpu_to_le16(cmd);
-+	loc->status = 0;
-+
-+/* NB: buflen == frmlen + 4
-+**
-+** Interrogate: write 8 bytes: (cmd,status,rid,frmlen), then
-+**		read (cmd,status,rid,frmlen,data[frmlen]) back
-+**
-+** Configure: write (cmd,status,rid,frmlen,data[frmlen])
-+**
-+** Possibly bogus special handling of ACX1xx_IE_SCAN_STATUS removed
-+*/
-+
-+	/* now write the parameters of the command if needed */
-+	acklen = buflen + 4 + BOGUS_SAFETY_PADDING;
-+	blocklen = buflen;
-+	if (buffer && buflen) {
-+		/* if it's an INTERROGATE command, just pass the length
-+		 * of parameters to read, as data */
-+		if (cmd == ACX1xx_CMD_INTERROGATE) {
-+			blocklen = 4;
-+			acklen = buflen + 4;
-+		}
-+		memcpy(loc->data, buffer, blocklen);
-+	}
-+	blocklen += 4; /* account for cmd,status */
-+
-+	/* obtain the I/O pipes */
-+	outpipe = usb_sndctrlpipe(usbdev, 0);
-+	inpipe = usb_rcvctrlpipe(usbdev, 0);
-+	log(L_CTL, "ctrl inpipe=0x%X outpipe=0x%X\n", inpipe, outpipe);
-+	log(L_CTL, "sending USB control msg (out) (blocklen=%d)\n", blocklen);
-+	if (acx_debug & L_DATA)
-+		acx_dump_bytes(loc, blocklen);
-+
-+	result = usb_control_msg(usbdev, outpipe,
-+		ACX_USB_REQ_CMD, /* request */
-+		USB_TYPE_VENDOR|USB_DIR_OUT, /* requesttype */
-+		0, /* value */
-+		0, /* index */
-+		loc, /* dataptr */
-+		blocklen, /* size */
-+		ACX_USB_CTRL_TIMEOUT /* timeout in ms */
-+	);
-+
-+	if (result == -ENODEV) {
-+		log(L_CTL, "no device present (unplug?)\n");
-+		goto good;
-+	}
-+
-+	log(L_CTL, "wrote %d bytes\n", result);
-+	if (result < 0) {
-+		goto bad;
-+	}
-+
-+	/* check for device acknowledge */
-+	log(L_CTL, "sending USB control msg (in) (acklen=%d)\n", acklen);
-+	loc->status = 0; /* delete old status flag -> set to IDLE */
-+	/* shall we zero out the rest? */
-+	result = usb_control_msg(usbdev, inpipe,
-+		ACX_USB_REQ_CMD, /* request */
-+		USB_TYPE_VENDOR|USB_DIR_IN, /* requesttype */
-+		0, /* value */
-+		0, /* index */
-+		loc, /* dataptr */
-+		acklen, /* size */
-+		ACX_USB_CTRL_TIMEOUT /* timeout in ms */
-+	);
-+	if (result < 0) {
-+		printk("%s: "FUNC"(): USB read error %d\n", devname, result);
-+		goto bad;
-+	}
-+	if (acx_debug & L_CTL) {
-+		printk("read %d bytes: ", result);
-+		acx_dump_bytes(loc, result);
-+	}
-+
-+/*
-+   check for result==buflen+4? Was seen:
-+
-+interrogate(type:ACX100_IE_DOT11_ED_THRESHOLD,len:4)
-+issue_cmd(cmd:ACX1xx_CMD_INTERROGATE,buflen:8,type:4111)
-+ctrl inpipe=0x80000280 outpipe=0x80000200
-+sending USB control msg (out) (blocklen=8)
-+01 00 00 00 0F 10 04 00
-+wrote 8 bytes
-+sending USB control msg (in) (acklen=12) sizeof(loc->data
-+read 4 bytes <==== MUST BE 12!!
-+*/
-+
-+	cmd_status = le16_to_cpu(loc->status);
-+	if (cmd_status != 1) {
-+		printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s)\n",
-+			devname, cmd_status, acx_cmd_status_str(cmd_status));
-+		/* TODO: goto bad; ? */
-+	}
-+	if ((cmd == ACX1xx_CMD_INTERROGATE) && buffer && buflen) {
-+		memcpy(buffer, loc->data, buflen);
-+		log(L_CTL, "response frame: cmd=0x%04X status=%d\n",
-+			le16_to_cpu(loc->cmd),
-+			cmd_status);
-+	}
-+good:
-+	kfree(loc);
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	/* Give enough info so that callers can avoid
-+	** printing their own diagnostic messages */
-+#if ACX_DEBUG
-+	printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr);
-+#else
-+	printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd);
-+#endif
-+	dump_stack();
-+	kfree(loc);
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_boot()
-+** Inputs:
-+**    usbdev -> Pointer to kernel's usb_device structure
-+**
-+** Returns:
-+**  (int) Errorcode or 0 on success
-+**
-+** This function triggers the loading of the firmware image from harddisk
-+** and then uploads the firmware to the USB device. After uploading the
-+** firmware and transmitting the checksum, the device resets and appears
-+** as a new device on the USB bus (the device we can finally deal with)
-+*/
-+static inline int
-+acxusb_fw_needs_padding(firmware_image_t *fw_image, unsigned int usb_maxlen)
-+{
-+	unsigned int num_xfers = ((fw_image->size - 1) / usb_maxlen) + 1;
-+
-+	return ((num_xfers % 2) == 0);
-+}
-+
-+static int
-+acxusb_boot(struct usb_device *usbdev, int is_tnetw1450, int *radio_type)
-+{
-+	char filename[sizeof("tiacx1NNusbcRR")];
-+
-+	firmware_image_t *fw_image = NULL;
-+	char *usbbuf;
-+	unsigned int offset;
-+	unsigned int blk_len, inpipe, outpipe;
-+	u32 num_processed;
-+	u32 img_checksum, sum;
-+	u32 file_size;
-+	int result = -EIO;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* dump_device(usbdev); */
-+
-+	usbbuf = kmalloc(USB_RWMEM_MAXLEN, GFP_KERNEL);
-+	if (!usbbuf) {
-+		printk(KERN_ERR "acx: no memory for USB transfer buffer (%d bytes)\n", USB_RWMEM_MAXLEN);
-+		result = -ENOMEM;
-+		goto end;
-+	}
-+	if (is_tnetw1450) {
-+		/* Obtain the I/O pipes */
-+		outpipe = usb_sndbulkpipe(usbdev, 1);
-+		inpipe = usb_rcvbulkpipe(usbdev, 2);
-+
-+		printk(KERN_DEBUG "wait for device ready\n");
-+		for (i = 0; i <= 2; i++) {
-+			result = usb_bulk_msg(usbdev, inpipe,
-+				usbbuf,
-+				USB_RWMEM_MAXLEN,
-+				&num_processed,
-+				2000
-+				);
-+
-+			if ((*(u32 *)&usbbuf[4] == 0x40000001)
-+			&& (*(u16 *)&usbbuf[2] == 0x1)
-+			&& ((*(u16 *)usbbuf & 0x3fff) == 0)
-+			&& ((*(u16 *)usbbuf & 0xc000) == 0xc000))
-+				break;
-+			msleep(10);
-+		}
-+		if (i == 2)
-+			goto fw_end;
-+
-+		*radio_type = usbbuf[8];
-+	} else {
-+		/* Obtain the I/O pipes */
-+		outpipe = usb_sndctrlpipe(usbdev, 0);
-+		inpipe = usb_rcvctrlpipe(usbdev, 0);
-+
-+		/* FIXME: shouldn't be hardcoded */
-+		*radio_type = RADIO_MAXIM_0D;
-+	}
-+
-+	snprintf(filename, sizeof(filename), "tiacx1%02dusbc%02X",
-+				is_tnetw1450 * 11, *radio_type);
-+
-+	fw_image = acx_s_read_fw(&usbdev->dev, filename, &file_size);
-+	if (!fw_image) {
-+		result = -EIO;
-+		goto end;
-+	}
-+	log(L_INIT, "firmware size: %d bytes\n", file_size);
-+
-+	img_checksum = le32_to_cpu(fw_image->chksum);
-+
-+	if (is_tnetw1450) {
-+		u8 cmdbuf[20];
-+		const u8 *p;
-+		u8 need_padding;
-+		u32 tmplen, val;
-+
-+		memset(cmdbuf, 0, 16);
-+
-+		need_padding = acxusb_fw_needs_padding(fw_image, USB_RWMEM_MAXLEN);
-+		tmplen = need_padding ? file_size-4 : file_size-8;
-+		*(u16 *)&cmdbuf[0] = 0xc000;
-+		*(u16 *)&cmdbuf[2] = 0x000b;
-+		*(u32 *)&cmdbuf[4] = tmplen;
-+		*(u32 *)&cmdbuf[8] = file_size-8;
-+		*(u32 *)&cmdbuf[12] = img_checksum;
-+
-+		result = usb_bulk_msg(usbdev, outpipe, cmdbuf, 16, &num_processed, HZ);
-+		if (result < 0)
-+			goto fw_end;
-+
-+		p = (const u8 *)&fw_image->size;
-+
-+		/* first calculate checksum for image size part */
-+		sum = p[0]+p[1]+p[2]+p[3];
-+		p += 4;
-+
-+		/* now continue checksum for firmware data part */
-+		tmplen = le32_to_cpu(fw_image->size);
-+		for (i = 0; i < tmplen /* image size */; i++) {
-+			sum += *p++;
-+		}
-+
-+		if (sum != le32_to_cpu(fw_image->chksum)) {
-+			printk("acx: FATAL: firmware upload: "
-+				"checksums don't match! "
-+				"(0x%08x vs. 0x%08x)\n",
-+					sum, fw_image->chksum);
-+			goto fw_end;
-+		}
-+
-+		offset = 8;
-+		while (offset < file_size) {
-+			blk_len = file_size - offset;
-+			if (blk_len > USB_RWMEM_MAXLEN) {
-+				blk_len = USB_RWMEM_MAXLEN;
-+			}
-+
-+			log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n",
-+							blk_len, offset);
-+			memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len);
-+
-+			p = usbbuf;
-+			for (i = 0; i < blk_len; i += 4) {
-+				*(u32 *)p = be32_to_cpu(*(u32 *)p);
-+				p += 4;
-+			}
-+
-+			result = usb_bulk_msg(usbdev, outpipe, usbbuf, blk_len, &num_processed, HZ);
-+			if ((result < 0) || (num_processed != blk_len))
-+				goto fw_end;
-+			offset += blk_len;
-+		}
-+		if (need_padding) {
-+			printk(KERN_DEBUG "send padding\n");
-+			memset(usbbuf, 0, 4);
-+			result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ);
-+			if ((result < 0) || (num_processed != 4))
-+				goto fw_end;
-+		}
-+		printk(KERN_DEBUG "read firmware upload result\n");
-+		memset(cmdbuf, 0, 20); /* additional memset */
-+		result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000);
-+		if (result < 0)
-+			goto fw_end;
-+		if (*(u32 *)&cmdbuf[4] == 0x40000003)
-+			goto fw_end;
-+		if (*(u32 *)&cmdbuf[4])
-+			goto fw_end;
-+		if (*(u16 *)&cmdbuf[16] != 1)
-+			goto fw_end;
-+
-+		val = *(u32 *)&cmdbuf[0];
-+		if ((val & 0x3fff)
-+		||  ((val & 0xc000) != 0xc000))
-+			goto fw_end;
-+
-+		val = *(u32 *)&cmdbuf[8];
-+		if (val & 2) {
-+			result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000);
-+			if (result < 0)
-+				goto fw_end;
-+			val = *(u32 *)&cmdbuf[8];
-+		}
-+		/* yup, no "else" here! */
-+		if (val & 1) {
-+			memset(usbbuf, 0, 4);
-+			result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ);
-+			if ((result < 0) || (!num_processed))
-+				goto fw_end;
-+		}
-+
-+		printk("TNETW1450 firmware upload successful!\n");
-+		result = 0;
-+		goto end;
-+fw_end:
-+		result = -EIO;
-+		goto end;
-+	} else {
-+		/* ACX100 USB */
-+
-+		/* now upload the firmware, slice the data into blocks */
-+		offset = 8;
-+		while (offset < file_size) {
-+			blk_len = file_size - offset;
-+			if (blk_len > USB_RWMEM_MAXLEN) {
-+				blk_len = USB_RWMEM_MAXLEN;
-+			}
-+			log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n",
-+							blk_len, offset);
-+			memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len);
-+			result = usb_control_msg(usbdev, outpipe,
-+				ACX_USB_REQ_UPLOAD_FW,
-+				USB_TYPE_VENDOR|USB_DIR_OUT,
-+				(file_size - 8) & 0xffff, /* value */
-+				(file_size - 8) >> 16, /* index */
-+				usbbuf, /* dataptr */
-+				blk_len, /* size */
-+				3000 /* timeout in ms */
-+			);
-+			offset += blk_len;
-+			if (result < 0) {
-+				printk(KERN_ERR "acx: error %d during upload "
-+					"of firmware, aborting\n", result);
-+				goto end;
-+			}
-+		}
-+
-+		/* finally, send the checksum and reboot the device */
-+		/* does this trigger the reboot? */
-+		result = usb_control_msg(usbdev, outpipe,
-+			ACX_USB_REQ_UPLOAD_FW,
-+			USB_TYPE_VENDOR|USB_DIR_OUT,
-+			img_checksum & 0xffff, /* value */
-+			img_checksum >> 16, /* index */
-+			NULL, /* dataptr */
-+			0, /* size */
-+			3000 /* timeout in ms */
-+		);
-+		if (result < 0) {
-+			printk(KERN_ERR "acx: error %d during tx of checksum, "
-+					"aborting\n", result);
-+			goto end;
-+		}
-+		result = usb_control_msg(usbdev, inpipe,
-+			ACX_USB_REQ_ACK_CS,
-+			USB_TYPE_VENDOR|USB_DIR_IN,
-+			img_checksum & 0xffff, /* value */
-+			img_checksum >> 16, /* index */
-+			usbbuf, /* dataptr */
-+			8, /* size */
-+			3000 /* timeout in ms */
-+		);
-+		if (result < 0) {
-+			printk(KERN_ERR "acx: error %d during ACK of checksum, "
-+					"aborting\n", result);
-+			goto end;
-+		}
-+		if (*usbbuf != 0x10) {
-+			printk(KERN_ERR "acx: invalid checksum?\n");
-+			result = -EINVAL;
-+			goto end;
-+		}
-+		result = 0;
-+	}
-+
-+end:
-+	vfree(fw_image);
-+	kfree(usbbuf);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/* FIXME: maybe merge it with usual eeprom reading, into common code? */
-+static void
-+acxusb_s_read_eeprom_version(acx_device_t *adev)
-+{
-+	u8 eeprom_ver[0x8];
-+
-+	memset(eeprom_ver, 0, sizeof(eeprom_ver));
-+	acx_s_interrogate(adev, &eeprom_ver, ACX1FF_IE_EEPROM_VER);
-+
-+	/* FIXME: which one of those values to take? */
-+	adev->eeprom_version = eeprom_ver[5];
-+}
-+
-+
-+/*
-+ * temporary helper function to at least fill important cfgopt members with
-+ * useful replacement values until we figure out how one manages to fetch
-+ * the configoption struct in the USB device case...
-+ */
-+static int
-+acxusb_s_fill_configoption(acx_device_t *adev)
-+{
-+	adev->cfgopt_probe_delay = 200;
-+	adev->cfgopt_dot11CCAModes = 4;
-+	adev->cfgopt_dot11Diversity = 1;
-+	adev->cfgopt_dot11ShortPreambleOption = 1;
-+	adev->cfgopt_dot11PBCCOption = 1;
-+	adev->cfgopt_dot11ChannelAgility = 0;
-+	adev->cfgopt_dot11PhyType = 5;
-+	adev->cfgopt_dot11TempType = 1;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_e_probe()
-+**
-+** This function is invoked by the kernel's USB core whenever a new device is
-+** attached to the system or the module is loaded. It is presented a usb_device
-+** structure from which information regarding the device is obtained and evaluated.
-+** In case this driver is able to handle one of the offered devices, it returns
-+** a non-null pointer to a driver context and thereby claims the device.
-+*/
-+
-+static void
-+dummy_netdev_init(struct net_device *ndev) {}
-+
-+static int
-+acxusb_e_probe(struct usb_interface *intf, const struct usb_device_id *devID)
-+{
-+	struct usb_device *usbdev = interface_to_usbdev(intf);
-+	acx_device_t *adev = NULL;
-+	struct net_device *ndev = NULL;
-+	struct usb_config_descriptor *config;
-+	struct usb_endpoint_descriptor *epdesc;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+	struct usb_host_endpoint *ep;
-+#endif
-+	struct usb_interface_descriptor *ifdesc;
-+	const char* msg;
-+	int numconfigs, numfaces, numep;
-+	int result = OK;
-+	int i;
-+	int radio_type;
-+	/* this one needs to be more precise in case there appears a TNETW1450 from the same vendor */
-+	int is_tnetw1450 = (usbdev->descriptor.idVendor != ACX100_VENDOR_ID);
-+
-+	FN_ENTER;
-+
-+	if (is_tnetw1450) {
-+		/* Boot the device (i.e. upload the firmware) */
-+		acxusb_boot(usbdev, is_tnetw1450, &radio_type);
-+
-+		/* TNETW1450-based cards will continue right away with
-+		 * the same USB ID after booting */
-+	} else {
-+		/* First check if this is the "unbooted" hardware */
-+		if (usbdev->descriptor.idProduct == ACX100_PRODUCT_ID_UNBOOTED) {
-+
-+			/* Boot the device (i.e. upload the firmware) */
-+			acxusb_boot(usbdev, is_tnetw1450, &radio_type);
-+
-+			/* DWL-120+ will first boot the firmware,
-+			 * then later have a *separate* probe() run
-+			 * since its USB ID will have changed after
-+			 * firmware boot!
-+			 * Since the first probe() run has no
-+			 * other purpose than booting the firmware,
-+			 * simply return immediately.
-+			*/
-+			log(L_INIT, "finished booting, returning from probe()\n");
-+			result = OK; /* success */
-+			goto end;
-+		}
-+		else
-+		/* device not unbooted, but invalid USB ID!? */
-+		if (usbdev->descriptor.idProduct != ACX100_PRODUCT_ID_BOOTED)
-+			goto end_nodev;
-+	}
-+
-+/* Ok, so it's our device and it has already booted */
-+
-+	/* Allocate memory for a network device */
-+
-+	ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init);
-+	/* (NB: memsets to 0 entire area) */
-+	if (!ndev) {
-+		msg = "acx: no memory for netdev\n";
-+		goto end_nomem;
-+	}
-+
-+	/* Register the callbacks for the network device functions */
-+
-+	ether_setup(ndev);
-+	ndev->open = &acxusb_e_open;
-+	ndev->stop = &acxusb_e_close;
-+	ndev->hard_start_xmit = (void *)&acx_i_start_xmit;
-+	ndev->get_stats = (void *)&acx_e_get_stats;
-+#if IW_HANDLER_VERSION <= 5
-+	ndev->get_wireless_stats = (void *)&acx_e_get_wireless_stats;
-+#endif
-+	ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
-+	ndev->set_multicast_list = (void *)&acxusb_i_set_rx_mode;
-+#ifdef HAVE_TX_TIMEOUT
-+	ndev->tx_timeout = &acxusb_i_tx_timeout;
-+	ndev->watchdog_timeo = 4 * HZ;
-+#endif
-+	ndev->change_mtu = &acx_e_change_mtu;
-+	SET_MODULE_OWNER(ndev);
-+
-+	/* Setup private driver context */
-+
-+	adev = ndev2adev(ndev);
-+	adev->ndev = ndev;
-+
-+	adev->dev_type = DEVTYPE_USB;
-+	adev->radio_type = radio_type;
-+	if (is_tnetw1450) {
-+		/* well, actually it's a TNETW1450, but since it
-+		 * seems to be sufficiently similar to TNETW1130,
-+		 * I don't want to change large amounts of code now */
-+		adev->chip_type = CHIPTYPE_ACX111;
-+	} else {
-+		adev->chip_type = CHIPTYPE_ACX100;
-+	}
-+
-+	adev->usbdev = usbdev;
-+	spin_lock_init(&adev->lock);    /* initial state: unlocked */
-+	sema_init(&adev->sem, 1);       /* initial state: 1 (upped) */
-+
-+	/* Check that this is really the hardware we know about.
-+	** If not sure, at least notify the user that he
-+	** may be in trouble...
-+	*/
-+	numconfigs = (int)usbdev->descriptor.bNumConfigurations;
-+	if (numconfigs != 1)
-+		printk("acx: number of configurations is %d, "
-+			"this driver only knows how to handle 1, "
-+			"be prepared for surprises\n", numconfigs);
-+
-+	config = &usbdev->config->desc;
-+	numfaces = config->bNumInterfaces;
-+	if (numfaces != 1)
-+		printk("acx: number of interfaces is %d, "
-+			"this driver only knows how to handle 1, "
-+			"be prepared for surprises\n", numfaces);
-+
-+	ifdesc = &intf->altsetting->desc;
-+	numep = ifdesc->bNumEndpoints;
-+	log(L_DEBUG, "# of endpoints: %d\n", numep);
-+
-+	if (is_tnetw1450) {
-+		adev->bulkoutep = 1;
-+		adev->bulkinep = 2;
-+	} else {
-+		/* obtain information about the endpoint
-+		** addresses, begin with some default values
-+		*/
-+		adev->bulkoutep = 1;
-+		adev->bulkinep = 1;
-+		for (i = 0; i < numep; i++) {
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+			ep = usbdev->ep_in[i];
-+			if (!ep)
-+				continue;
-+			epdesc = &ep->desc;
-+#else
-+			epdesc = usb_epnum_to_ep_desc(usbdev, i);
-+			if (!epdesc)
-+				continue;
-+#endif
-+			if (epdesc->bmAttributes & USB_ENDPOINT_XFER_BULK) {
-+				if (epdesc->bEndpointAddress & 0x80)
-+					adev->bulkinep = epdesc->bEndpointAddress & 0xF;
-+				else
-+					adev->bulkoutep = epdesc->bEndpointAddress & 0xF;
-+			}
-+		}
-+	}
-+	log(L_DEBUG, "bulkout ep: 0x%X\n", adev->bulkoutep);
-+	log(L_DEBUG, "bulkin ep: 0x%X\n", adev->bulkinep);
-+
-+	/* already done by memset: adev->rxtruncsize = 0; */
-+	log(L_DEBUG, "TXBUFSIZE=%d RXBUFSIZE=%d\n",
-+				(int) TXBUFSIZE, (int) RXBUFSIZE);
-+
-+	/* Allocate the RX/TX containers. */
-+	adev->usb_tx = kmalloc(sizeof(usb_tx_t) * ACX_TX_URB_CNT, GFP_KERNEL);
-+	if (!adev->usb_tx) {
-+		msg = "acx: no memory for tx container";
-+		goto end_nomem;
-+	}
-+	adev->usb_rx = kmalloc(sizeof(usb_rx_t) * ACX_RX_URB_CNT, GFP_KERNEL);
-+	if (!adev->usb_rx) {
-+		msg = "acx: no memory for rx container";
-+		goto end_nomem;
-+	}
-+
-+	/* Setup URBs for bulk-in/out messages */
-+	for (i = 0; i < ACX_RX_URB_CNT; i++) {
-+		adev->usb_rx[i].urb = usb_alloc_urb(0, GFP_KERNEL);
-+		if (!adev->usb_rx[i].urb) {
-+			msg = "acx: no memory for input URB\n";
-+			goto end_nomem;
-+		}
-+		adev->usb_rx[i].urb->status = 0;
-+		adev->usb_rx[i].adev = adev;
-+		adev->usb_rx[i].busy = 0;
-+	}
-+
-+	for (i = 0; i< ACX_TX_URB_CNT; i++) {
-+		adev->usb_tx[i].urb = usb_alloc_urb(0, GFP_KERNEL);
-+		if (!adev->usb_tx[i].urb) {
-+			msg = "acx: no memory for output URB\n";
-+			goto end_nomem;
-+		}
-+		adev->usb_tx[i].urb->status = 0;
-+		adev->usb_tx[i].adev = adev;
-+		adev->usb_tx[i].busy = 0;
-+	}
-+	adev->tx_free = ACX_TX_URB_CNT;
-+
-+	usb_set_intfdata(intf, adev);
-+	SET_NETDEV_DEV(ndev, &intf->dev);
-+
-+	/* TODO: move all of fw cmds to open()? But then we won't know our MAC addr
-+	   until ifup (it's available via reading ACX1xx_IE_DOT11_STATION_ID)... */
-+
-+	/* put acx out of sleep mode and initialize it */
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+
-+	result = acx_s_init_mac(adev);
-+	if (result)
-+		goto end;
-+
-+	/* TODO: see similar code in pci.c */
-+	acxusb_s_read_eeprom_version(adev);
-+	acxusb_s_fill_configoption(adev);
-+	acx_s_set_defaults(adev);
-+	acx_s_get_firmware_version(adev);
-+	acx_display_hardware_details(adev);
-+
-+	/* Register the network device */
-+	log(L_INIT, "registering network device\n");
-+	result = register_netdev(ndev);
-+	if (result) {
-+		msg = "acx: failed to register USB network device "
-+			"(error %d)\n";
-+		goto end_nomem;
-+	}
-+
-+	acx_proc_register_entries(ndev);
-+
-+	acx_stop_queue(ndev, "on probe");
-+	acx_carrier_off(ndev, "on probe");
-+
-+	printk("acx: USB module " ACX_RELEASE " loaded successfully\n");
-+
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	/* Everything went OK, we are happy now	*/
-+	result = OK;
-+	goto end;
-+
-+end_nomem:
-+	printk(msg, result);
-+
-+	if (ndev) {
-+		if (adev->usb_rx) {
-+			for (i = 0; i < ACX_RX_URB_CNT; i++)
-+				usb_free_urb(adev->usb_rx[i].urb);
-+			kfree(adev->usb_rx);
-+		}
-+		if (adev->usb_tx) {
-+			for (i = 0; i < ACX_TX_URB_CNT; i++)
-+				usb_free_urb(adev->usb_tx[i].urb);
-+			kfree(adev->usb_tx);
-+		}
-+		free_netdev(ndev);
-+	}
-+
-+	result = -ENOMEM;
-+	goto end;
-+
-+end_nodev:
-+	/* no device we could handle, return error. */
-+	result = -EIO;
-+
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_e_disconnect()
-+**
-+** This function is invoked whenever the user pulls the plug from the USB
-+** device or the module is removed from the kernel. In these cases, the
-+** network devices have to be taken down and all allocated memory has
-+** to be freed.
-+*/
-+static void
-+acxusb_e_disconnect(struct usb_interface *intf)
-+{
-+	acx_device_t *adev = usb_get_intfdata(intf);
-+	unsigned long flags;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* No WLAN device... no sense */
-+	if (!adev)
-+		goto end;
-+
-+	/* Unregister network device
-+	 *
-+	 * If the interface is up, unregister_netdev() will take
-+	 * care of calling our close() function, which takes
-+	 * care of unlinking the urbs, sending the device to
-+	 * sleep, etc...
-+	 * This can't be called with sem or lock held because
-+	 * _close() will try to grab it as well if it's called,
-+	 * deadlocking the machine.
-+	 */
-+	unregister_netdev(adev->ndev);
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+	/* This device exists no more */
-+	usb_set_intfdata(intf, NULL);
-+	acx_proc_unregister_entries(adev->ndev);
-+
-+	/*
-+	 * Here we only free them. _close() took care of
-+	 * unlinking them.
-+	 */
-+	for (i = 0; i < ACX_RX_URB_CNT; ++i) {
-+		usb_free_urb(adev->usb_rx[i].urb);
-+	}
-+	for (i = 0; i< ACX_TX_URB_CNT; ++i) {
-+		usb_free_urb(adev->usb_tx[i].urb);
-+	}
-+
-+	/* Freeing containers */
-+	kfree(adev->usb_rx);
-+	kfree(adev->usb_tx);
-+
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+
-+	free_netdev(adev->ndev);
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_e_open()
-+** This function is called when the user sets up the network interface.
-+** It initializes a management timer, sets up the USB card and starts
-+** the network tx queue and USB receive.
-+*/
-+static int
-+acxusb_e_open(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* put the ACX100 out of sleep mode */
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+
-+	acx_init_task_scheduler(adev);
-+
-+	init_timer(&adev->mgmt_timer);
-+	adev->mgmt_timer.function = acx_i_timer;
-+	adev->mgmt_timer.data = (unsigned long)adev;
-+
-+	/* acx_s_start needs it */
-+	SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	acx_s_start(adev);
-+
-+	/* don't acx_start_queue() here, we need to associate first */
-+
-+	acx_lock(adev, flags);
-+	for (i = 0; i < ACX_RX_URB_CNT; i++) {
-+		adev->usb_rx[i].urb->status = 0;
-+	}
-+
-+	acxusb_l_poll_rx(adev, &adev->usb_rx[0]);
-+
-+	acx_unlock(adev, flags);
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT0;
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_e_close()
-+**
-+** This function stops the network functionality of the interface (invoked
-+** when the user calls ifconfig <wlan> down). The tx queue is halted and
-+** the device is marked as down. In case there were any pending USB bulk
-+** transfers, these are unlinked (asynchronously). The module in-use count
-+** is also decreased in this function.
-+*/
-+static int
-+acxusb_e_close(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	int i;
-+
-+	FN_ENTER;
-+
-+#ifdef WE_STILL_DONT_CARE_ABOUT_IT
-+	/* Transmit a disassociate frame */
-+	lock
-+	acx_l_transmit_disassoc(adev, &client);
-+	unlock
-+#endif
-+
-+	acx_sem_lock(adev);
-+
-+	CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+
-+/* Code below is remarkably similar to acxpci_s_down(). Maybe we can merge them? */
-+
-+	/* Make sure we don't get any more rx requests */
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+
-+	/*
-+	 * We must do FLUSH *without* holding sem to avoid a deadlock.
-+	 * See pci.c:acxpci_s_down() for deails.
-+	 */
-+	acx_sem_unlock(adev);
-+	FLUSH_SCHEDULED_WORK();
-+	acx_sem_lock(adev);
-+
-+	/* Power down the device */
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0);
-+
-+	/* Stop the transmit queue, mark the device as DOWN */
-+	acx_lock(adev, flags);
-+	acx_stop_queue(ndev, "on ifdown");
-+	acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+	/* stop pending rx/tx urb transfers */
-+	for (i = 0; i < ACX_TX_URB_CNT; i++) {
-+		acxusb_unlink_urb(adev->usb_tx[i].urb);
-+		adev->usb_tx[i].busy = 0;
-+	}
-+	for (i = 0; i < ACX_RX_URB_CNT; i++) {
-+		acxusb_unlink_urb(adev->usb_rx[i].urb);
-+		adev->usb_rx[i].busy = 0;
-+	}
-+	adev->tx_free = ACX_TX_URB_CNT;
-+	acx_unlock(adev, flags);
-+
-+	/* Must do this outside of lock */
-+	del_timer_sync(&adev->mgmt_timer);
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT0;
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_l_poll_rx
-+** This function (re)initiates a bulk-in USB transfer on a given urb
-+*/
-+static void
-+acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx)
-+{
-+	struct usb_device *usbdev;
-+	struct urb *rxurb;
-+	int errcode, rxnum;
-+	unsigned int inpipe;
-+
-+	FN_ENTER;
-+
-+	rxurb = rx->urb;
-+	usbdev = adev->usbdev;
-+
-+	rxnum = rx - adev->usb_rx;
-+
-+	inpipe = usb_rcvbulkpipe(usbdev, adev->bulkinep);
-+	if (unlikely(rxurb->status == -EINPROGRESS)) {
-+		printk(KERN_ERR "acx: error, rx triggered while rx urb in progress\n");
-+		/* FIXME: this is nasty, receive is being cancelled by this code
-+		 * on the other hand, this should not happen anyway...
-+		 */
-+		usb_unlink_urb(rxurb);
-+	} else
-+	if (unlikely(rxurb->status == -ECONNRESET)) {
-+		log(L_USBRXTX, "acx_usb: _poll_rx: connection reset\n");
-+		goto end;
-+	}
-+	rxurb->actual_length = 0;
-+	usb_fill_bulk_urb(rxurb, usbdev, inpipe,
-+		&rx->bulkin, /* dataptr */
-+		RXBUFSIZE, /* size */
-+		acxusb_i_complete_rx, /* handler */
-+		rx /* handler param */
-+	);
-+	rxurb->transfer_flags = URB_ASYNC_UNLINK;
-+
-+	/* ATOMIC: we may be called from complete_rx() usb callback */
-+	errcode = usb_submit_urb(rxurb, GFP_ATOMIC);
-+	/* FIXME: evaluate the error code! */
-+	log(L_USBRXTX, "SUBMIT RX (%d) inpipe=0x%X size=%d errcode=%d\n",
-+			rxnum, inpipe, (int) RXBUFSIZE, errcode);
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_i_complete_rx()
-+** Inputs:
-+**     urb -> pointer to USB request block
-+**    regs -> pointer to register-buffer for syscalls (see asm/ptrace.h)
-+**
-+** This function is invoked by USB subsystem whenever a bulk receive
-+** request returns.
-+** The received data is then committed to the network stack and the next
-+** USB receive is triggered.
-+*/
-+static void
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxusb_i_complete_rx(struct urb *urb)
-+#else
-+acxusb_i_complete_rx(struct urb *urb, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	rxbuffer_t *ptr;
-+	rxbuffer_t *inbuf;
-+	usb_rx_t *rx;
-+	unsigned long flags;
-+	int size, remsize, packetsize, rxnum;
-+
-+	FN_ENTER;
-+
-+	BUG_ON(!urb->context);
-+
-+	rx = (usb_rx_t *)urb->context;
-+	adev = rx->adev;
-+
-+	acx_lock(adev, flags);
-+
-+	/*
-+	 * Happens on disconnect or close. Don't play with the urb.
-+	 * Don't resubmit it. It will get unlinked by close()
-+	 */
-+	if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) {
-+		log(L_USBRXTX, "rx: device is down, not doing anything\n");
-+		goto end_unlock;
-+	}
-+
-+	inbuf = &rx->bulkin;
-+	size = urb->actual_length;
-+	remsize = size;
-+	rxnum = rx - adev->usb_rx;
-+
-+	log(L_USBRXTX, "RETURN RX (%d) status=%d size=%d\n",
-+				rxnum, urb->status, size);
-+
-+	/* Send the URB that's waiting. */
-+	log(L_USBRXTX, "rxnum=%d, sending=%d\n", rxnum, rxnum^1);
-+	acxusb_l_poll_rx(adev, &adev->usb_rx[rxnum^1]);
-+
-+	if (unlikely(size > sizeof(rxbuffer_t)))
-+		printk("acx_usb: rx too large: %d, please report\n", size);
-+
-+	/* check if the transfer was aborted */
-+	switch (urb->status) {
-+	case 0: /* No error */
-+		break;
-+	case -EOVERFLOW:
-+		printk(KERN_ERR "acx: rx data overrun\n");
-+		adev->rxtruncsize = 0; /* Not valid anymore. */
-+		goto end_unlock;
-+	case -ECONNRESET:
-+		adev->rxtruncsize = 0;
-+		goto end_unlock;
-+	case -ESHUTDOWN: /* rmmod */
-+		adev->rxtruncsize = 0;
-+		goto end_unlock;
-+	default:
-+		adev->rxtruncsize = 0;
-+		adev->stats.rx_errors++;
-+		printk("acx: rx error (urb status=%d)\n", urb->status);
-+		goto end_unlock;
-+	}
-+
-+	if (unlikely(!size))
-+		printk("acx: warning, encountered zerolength rx packet\n");
-+
-+	if (urb->transfer_buffer != inbuf)
-+		goto end_unlock;
-+
-+	/* check if previous frame was truncated
-+	** FIXME: this code can only handle truncation
-+	** of consecutive packets!
-+	*/
-+	ptr = inbuf;
-+	if (adev->rxtruncsize) {
-+		int tail_size;
-+
-+		ptr = &adev->rxtruncbuf;
-+		packetsize = RXBUF_BYTES_USED(ptr);
-+		if (acx_debug & L_USBRXTX) {
-+			printk("handling truncated frame (truncsize=%d size=%d "
-+					"packetsize(from trunc)=%d)\n",
-+					adev->rxtruncsize, size, packetsize);
-+			acx_dump_bytes(ptr, RXBUF_HDRSIZE);
-+			acx_dump_bytes(inbuf, RXBUF_HDRSIZE);
-+		}
-+
-+		/* bytes needed for rxtruncbuf completion: */
-+		tail_size = packetsize - adev->rxtruncsize;
-+
-+		if (size < tail_size) {
-+			/* there is not enough data to complete this packet,
-+			** simply append the stuff to the truncation buffer
-+			*/
-+			memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, size);
-+			adev->rxtruncsize += size;
-+			remsize = 0;
-+		} else {
-+			/* ok, this data completes the previously
-+			** truncated packet. copy it into a descriptor
-+			** and give it to the rest of the stack	*/
-+
-+			/* append tail to previously truncated part
-+			** NB: adev->rxtruncbuf (pointed to by ptr) can't
-+			** overflow because this is already checked before
-+			** truncation buffer was filled. See below,
-+			** "if (packetsize > sizeof(rxbuffer_t))..." code */
-+			memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, tail_size);
-+
-+			if (acx_debug & L_USBRXTX) {
-+				printk("full trailing packet + 12 bytes:\n");
-+				acx_dump_bytes(inbuf, tail_size + RXBUF_HDRSIZE);
-+			}
-+			acx_l_process_rxbuf(adev, ptr);
-+			adev->rxtruncsize = 0;
-+			ptr = (rxbuffer_t *) (((char *)inbuf) + tail_size);
-+			remsize -= tail_size;
-+		}
-+		log(L_USBRXTX, "post-merge size=%d remsize=%d\n",
-+						size, remsize);
-+	}
-+
-+	/* size = USB data block size
-+	** remsize = unprocessed USB bytes left
-+	** ptr = current pos in USB data block
-+	*/
-+	while (remsize) {
-+		if (remsize < RXBUF_HDRSIZE) {
-+			printk("acx: truncated rx header (%d bytes)!\n",
-+				remsize);
-+			if (ACX_DEBUG)
-+				acx_dump_bytes(ptr, remsize);
-+			break;
-+		}
-+
-+		packetsize = RXBUF_BYTES_USED(ptr);
-+		log(L_USBRXTX, "packet with packetsize=%d\n", packetsize);
-+
-+		if (RXBUF_IS_TXSTAT(ptr)) {
-+			/* do rate handling */
-+			usb_txstatus_t *stat = (void*)ptr;
-+			u16 client_no = (u16)stat->hostdata;
-+
-+			log(L_USBRXTX, "tx: stat: mac_cnt_rcvd:%04X "
-+			"queue_index:%02X mac_status:%02X hostdata:%08X "
-+			"rate:%u ack_failures:%02X rts_failures:%02X "
-+			"rts_ok:%02X\n",
-+			stat->mac_cnt_rcvd,
-+			stat->queue_index, stat->mac_status, stat->hostdata,
-+			stat->rate, stat->ack_failures, stat->rts_failures,
-+			stat->rts_ok);
-+
-+			if (adev->rate_auto && client_no < VEC_SIZE(adev->sta_list)) {
-+				client_t *clt = &adev->sta_list[client_no];
-+				u16 cur = stat->hostdata >> 16;
-+
-+				if (clt && clt->rate_cur == cur) {
-+					acx_l_handle_txrate_auto(adev, clt,
-+						cur, /* intended rate */
-+						stat->rate, 0, /* actually used rate */
-+						stat->mac_status, /* error? */
-+						ACX_TX_URB_CNT - adev->tx_free);
-+				}
-+			}
-+			goto next;
-+		}
-+
-+		if (packetsize > sizeof(rxbuffer_t)) {
-+			printk("acx: packet exceeds max wlan "
-+				"frame size (%d > %d). size=%d\n",
-+				packetsize, (int) sizeof(rxbuffer_t), size);
-+			if (ACX_DEBUG)
-+				acx_dump_bytes(ptr, 16);
-+			/* FIXME: put some real error-handling in here! */
-+			break;
-+		}
-+
-+		if (packetsize > remsize) {
-+			/* frame truncation handling */
-+			if (acx_debug & L_USBRXTX) {
-+				printk("need to truncate packet, "
-+					"packetsize=%d remsize=%d "
-+					"size=%d bytes:",
-+					packetsize, remsize, size);
-+				acx_dump_bytes(ptr, RXBUF_HDRSIZE);
-+			}
-+			memcpy(&adev->rxtruncbuf, ptr, remsize);
-+			adev->rxtruncsize = remsize;
-+			break;
-+		}
-+
-+		/* packetsize <= remsize */
-+		/* now handle the received data */
-+		acx_l_process_rxbuf(adev, ptr);
-+next:
-+		ptr = (rxbuffer_t *)(((char *)ptr) + packetsize);
-+		remsize -= packetsize;
-+		if ((acx_debug & L_USBRXTX) && remsize) {
-+			printk("more than one packet in buffer, "
-+						"second packet hdr:");
-+			acx_dump_bytes(ptr, RXBUF_HDRSIZE);
-+		}
-+	}
-+
-+end_unlock:
-+	acx_unlock(adev, flags);
-+/* end: */
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_i_complete_tx()
-+** Inputs:
-+**     urb -> pointer to USB request block
-+**    regs -> pointer to register-buffer for syscalls (see asm/ptrace.h)
-+**
-+** This function is invoked upon termination of a USB transfer.
-+*/
-+static void
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxusb_i_complete_tx(struct urb *urb)
-+#else
-+acxusb_i_complete_tx(struct urb *urb, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	usb_tx_t *tx;
-+	unsigned long flags;
-+	int txnum;
-+
-+	FN_ENTER;
-+
-+	BUG_ON(!urb->context);
-+
-+	tx = (usb_tx_t *)urb->context;
-+	adev = tx->adev;
-+
-+	txnum = tx - adev->usb_tx;
-+
-+	acx_lock(adev, flags);
-+
-+	/*
-+	 * If the iface isn't up, we don't have any right
-+	 * to play with them. The urb may get unlinked.
-+	 */
-+	if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) {
-+		log(L_USBRXTX, "tx: device is down, not doing anything\n");
-+		goto end_unlock;
-+	}
-+
-+	log(L_USBRXTX, "RETURN TX (%d): status=%d size=%d\n",
-+				txnum, urb->status, urb->actual_length);
-+
-+	/* handle USB transfer errors */
-+	switch (urb->status) {
-+	case 0:	/* No error */
-+		break;
-+	case -ESHUTDOWN:
-+		goto end_unlock;
-+		break;
-+	case -ECONNRESET:
-+		goto end_unlock;
-+		break;
-+		/* FIXME: real error-handling code here please */
-+	default:
-+		printk(KERN_ERR "acx: tx error, urb status=%d\n", urb->status);
-+		/* FIXME: real error-handling code here please */
-+	}
-+
-+	/* free the URB and check for more data	*/
-+	tx->busy = 0;
-+	adev->tx_free++;
-+	if ((adev->tx_free >= TX_START_QUEUE)
-+	 && (adev->status == ACX_STATUS_4_ASSOCIATED)
-+	 && (acx_queue_stopped(adev->ndev))
-+	) {
-+		log(L_BUF, "tx: wake queue (%u free txbufs)\n",
-+				adev->tx_free);
-+		acx_wake_queue(adev->ndev, NULL);
-+	}
-+
-+end_unlock:
-+	acx_unlock(adev, flags);
-+/* end: */
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxusb_l_alloc_tx
-+** Actually returns a usb_tx_t* ptr
-+*/
-+tx_t*
-+acxusb_l_alloc_tx(acx_device_t *adev)
-+{
-+	usb_tx_t *tx;
-+	unsigned head;
-+
-+	FN_ENTER;
-+
-+	head = adev->tx_head;
-+	do {
-+		head = (head + 1) % ACX_TX_URB_CNT;
-+		if (!adev->usb_tx[head].busy) {
-+			log(L_USBRXTX, "allocated tx %d\n", head);
-+			tx = &adev->usb_tx[head];
-+			tx->busy = 1;
-+			adev->tx_free--;
-+			/* Keep a few free descs between head and tail of tx ring.
-+			** It is not absolutely needed, just feels safer */
-+			if (adev->tx_free < TX_STOP_QUEUE) {
-+				log(L_BUF, "tx: stop queue "
-+					"(%u free txbufs)\n", adev->tx_free);
-+				acx_stop_queue(adev->ndev, NULL);
-+			}
-+			goto end;
-+		}
-+	} while (likely(head!=adev->tx_head));
-+	tx = NULL;
-+	printk_ratelimited("acx: tx buffers full\n");
-+end:
-+	adev->tx_head = head;
-+	FN_EXIT0;
-+	return (tx_t*)tx;
-+}
-+
-+
-+/***************************************************************
-+** Used if alloc_tx()'ed buffer needs to be cancelled without doing tx
-+*/
-+void
-+acxusb_l_dealloc_tx(tx_t *tx_opaque)
-+{
-+	usb_tx_t* tx = (usb_tx_t*)tx_opaque;
-+	tx->busy = 0;
-+}
-+
-+
-+/***************************************************************
-+*/
-+void*
-+acxusb_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque)
-+{
-+	usb_tx_t* tx = (usb_tx_t*)tx_opaque;
-+	return &tx->bulkout.data;
-+}
-+
-+
-+/***************************************************************
-+** acxusb_l_tx_data
-+**
-+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx).
-+** Can be called from acx_i_start_xmit (data frames from net core).
-+*/
-+void
-+acxusb_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int wlanpkt_len)
-+{
-+	struct usb_device *usbdev;
-+	struct urb* txurb;
-+	usb_tx_t* tx;
-+	usb_txbuffer_t* txbuf;
-+	client_t *clt;
-+	wlan_hdr_t* whdr;
-+	unsigned int outpipe;
-+	int ucode, txnum;
-+
-+	FN_ENTER;
-+
-+	tx = ((usb_tx_t *)tx_opaque);
-+	txurb = tx->urb;
-+	txbuf = &tx->bulkout;
-+	whdr = (wlan_hdr_t *)txbuf->data;
-+	txnum = tx - adev->usb_tx;
-+
-+	log(L_DEBUG, "using buf#%d free=%d len=%d\n",
-+			txnum, adev->tx_free, wlanpkt_len);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_3_AP:
-+		clt = acx_l_sta_list_get(adev, whdr->a1);
-+		break;
-+	case ACX_MODE_2_STA:
-+		clt = adev->ap_client;
-+		break;
-+	default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */
-+		clt = NULL;
-+		break;
-+	}
-+
-+	if (unlikely(clt && !clt->rate_cur)) {
-+		printk("acx: driver bug! bad ratemask\n");
-+		goto end;
-+	}
-+
-+	/* fill the USB transfer header */
-+	txbuf->desc = cpu_to_le16(USB_TXBUF_TXDESC);
-+	txbuf->mpdu_len = cpu_to_le16(wlanpkt_len);
-+	txbuf->queue_index = 1;
-+	if (clt) {
-+		txbuf->rate = clt->rate_100;
-+		txbuf->hostdata = (clt - adev->sta_list) | (clt->rate_cur << 16);
-+	} else {
-+		txbuf->rate = adev->rate_bcast100;
-+		txbuf->hostdata = ((u16)-1) | (adev->rate_bcast << 16);
-+	}
-+	txbuf->ctrl1 = DESC_CTL_FIRSTFRAG;
-+	if (1 == adev->preamble_cur)
-+		SET_BIT(txbuf->ctrl1, DESC_CTL_SHORT_PREAMBLE);
-+	txbuf->ctrl2 = 0;
-+	txbuf->data_len = cpu_to_le16(wlanpkt_len);
-+
-+	if (unlikely(acx_debug & L_DATA)) {
-+		printk("dump of bulk out urb:\n");
-+		acx_dump_bytes(txbuf, wlanpkt_len + USB_TXBUF_HDRSIZE);
-+	}
-+
-+	if (unlikely(txurb->status == -EINPROGRESS)) {
-+		printk("acx: trying to submit tx urb while already in progress\n");
-+	}
-+
-+	/* now schedule the USB transfer */
-+	usbdev = adev->usbdev;
-+	outpipe = usb_sndbulkpipe(usbdev, adev->bulkoutep);
-+
-+	usb_fill_bulk_urb(txurb, usbdev, outpipe,
-+		txbuf, /* dataptr */
-+		wlanpkt_len + USB_TXBUF_HDRSIZE, /* size */
-+		acxusb_i_complete_tx, /* handler */
-+		tx /* handler param */
-+	);
-+
-+	txurb->transfer_flags = URB_ASYNC_UNLINK|URB_ZERO_PACKET;
-+	ucode = usb_submit_urb(txurb, GFP_ATOMIC);
-+	log(L_USBRXTX, "SUBMIT TX (%d): outpipe=0x%X buf=%p txsize=%d "
-+		"rate=%u errcode=%d\n", txnum, outpipe, txbuf,
-+		wlanpkt_len + USB_TXBUF_HDRSIZE, txbuf->rate, ucode);
-+
-+	if (unlikely(ucode)) {
-+		printk(KERN_ERR "acx: submit_urb() error=%d txsize=%d\n",
-+			ucode, wlanpkt_len + USB_TXBUF_HDRSIZE);
-+
-+		/* on error, just mark the frame as done and update
-+		** the statistics
-+		*/
-+		adev->stats.tx_errors++;
-+		tx->busy = 0;
-+		adev->tx_free++;
-+		/* needed? if (adev->tx_free > TX_START_QUEUE) acx_wake_queue(...) */
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static void
-+acxusb_i_set_rx_mode(struct net_device *ndev)
-+{
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#ifdef HAVE_TX_TIMEOUT
-+static void
-+acxusb_i_tx_timeout(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+	/* unlink the URBs */
-+	for (i = 0; i < ACX_TX_URB_CNT; i++) {
-+		acxusb_unlink_urb(adev->usb_tx[i].urb);
-+		adev->usb_tx[i].busy = 0;
-+	}
-+	adev->tx_free = ACX_TX_URB_CNT;
-+	/* TODO: stats update */
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** init_module()
-+**
-+** This function is invoked upon loading of the kernel module.
-+** It registers itself at the kernel's USB subsystem.
-+**
-+** Returns: Errorcode on failure, 0 on success
-+*/
-+int __init
-+acxusb_e_init_module(void)
-+{
-+	log(L_INIT, "USB module " ACX_RELEASE " initialized, "
-+		"probing for devices...\n");
-+	return usb_register(&acxusb_driver);
-+}
-+
-+
-+
-+/***********************************************************************
-+** cleanup_module()
-+**
-+** This function is invoked as last step of the module unloading. It simply
-+** deregisters this module at the kernel's USB subsystem.
-+*/
-+void __exit
-+acxusb_e_cleanup_module()
-+{
-+	usb_deregister(&acxusb_driver);
-+}
-+
-+
-+/***********************************************************************
-+** DEBUG STUFF
-+*/
-+#if ACX_DEBUG
-+
-+#ifdef UNUSED
-+static void
-+dump_device(struct usb_device *usbdev)
-+{
-+	int i;
-+	struct usb_config_descriptor *cd;
-+
-+	printk("acx device dump:\n");
-+	printk("  devnum: %d\n", usbdev->devnum);
-+	printk("  speed: %d\n", usbdev->speed);
-+	printk("  tt: 0x%X\n", (unsigned int)(usbdev->tt));
-+	printk("  ttport: %d\n", (unsigned int)(usbdev->ttport));
-+	printk("  toggle[0]: 0x%X  toggle[1]: 0x%X\n", (unsigned int)(usbdev->toggle[0]), (unsigned int)(usbdev->toggle[1]));
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+	/* This saw a change after 2.6.10 */
-+	printk("  ep_in wMaxPacketSize: ");
-+	for (i = 0; i < 16; ++i)
-+		if (usbdev->ep_in[i] != NULL)
-+			printk("%d:%d ", i, usbdev->ep_in[i]->desc.wMaxPacketSize);
-+	printk("\n");
-+	printk("  ep_out wMaxPacketSize: ");
-+	for (i = 0; i < VEC_SIZE(usbdev->ep_out); ++i)
-+		if (usbdev->ep_out[i] != NULL)
-+			printk("%d:%d ", i, usbdev->ep_out[i]->desc.wMaxPacketSize);
-+	printk("\n");
-+#else
-+	printk("  epmaxpacketin: ");
-+	for (i = 0; i < 16; i++)
-+		printk("%d ", usbdev->epmaxpacketin[i]);
-+	printk("\n");
-+	printk("  epmaxpacketout: ");
-+	for (i = 0; i < 16; i++)
-+		printk("%d ", usbdev->epmaxpacketout[i]);
-+	printk("\n");
-+#endif
-+	printk("  parent: 0x%X\n", (unsigned int)usbdev->parent);
-+	printk("  bus: 0x%X\n", (unsigned int)usbdev->bus);
-+#ifdef NO_DATATYPE
-+	printk("  configs: ");
-+	for (i = 0; i < usbdev->descriptor.bNumConfigurations; i++)
-+		printk("0x%X ", usbdev->config[i]);
-+	printk("\n");
-+#endif
-+	printk("  actconfig: %p\n", usbdev->actconfig);
-+	dump_device_descriptor(&usbdev->descriptor);
-+
-+	cd = &usbdev->config->desc;
-+	dump_config_descriptor(cd);
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static void
-+dump_config_descriptor(struct usb_config_descriptor *cd)
-+{
-+	printk("Configuration Descriptor:\n");
-+	if (!cd) {
-+		printk("NULL\n");
-+		return;
-+	}
-+	printk("  bLength: %d (0x%X)\n", cd->bLength, cd->bLength);
-+	printk("  bDescriptorType: %d (0x%X)\n", cd->bDescriptorType, cd->bDescriptorType);
-+	printk("  bNumInterfaces: %d (0x%X)\n", cd->bNumInterfaces, cd->bNumInterfaces);
-+	printk("  bConfigurationValue: %d (0x%X)\n", cd->bConfigurationValue, cd->bConfigurationValue);
-+	printk("  iConfiguration: %d (0x%X)\n", cd->iConfiguration, cd->iConfiguration);
-+	printk("  bmAttributes: %d (0x%X)\n", cd->bmAttributes, cd->bmAttributes);
-+	/* printk("  MaxPower: %d (0x%X)\n", cd->bMaxPower, cd->bMaxPower); */
-+}
-+
-+
-+static void
-+dump_device_descriptor(struct usb_device_descriptor *dd)
-+{
-+	printk("Device Descriptor:\n");
-+	if (!dd) {
-+		printk("NULL\n");
-+		return;
-+	}
-+	printk("  bLength: %d (0x%X)\n", dd->bLength, dd->bLength);
-+	printk("  bDescriptortype: %d (0x%X)\n", dd->bDescriptorType, dd->bDescriptorType);
-+	printk("  bcdUSB: %d (0x%X)\n", dd->bcdUSB, dd->bcdUSB);
-+	printk("  bDeviceClass: %d (0x%X)\n", dd->bDeviceClass, dd->bDeviceClass);
-+	printk("  bDeviceSubClass: %d (0x%X)\n", dd->bDeviceSubClass, dd->bDeviceSubClass);
-+	printk("  bDeviceProtocol: %d (0x%X)\n", dd->bDeviceProtocol, dd->bDeviceProtocol);
-+	printk("  bMaxPacketSize0: %d (0x%X)\n", dd->bMaxPacketSize0, dd->bMaxPacketSize0);
-+	printk("  idVendor: %d (0x%X)\n", dd->idVendor, dd->idVendor);
-+	printk("  idProduct: %d (0x%X)\n", dd->idProduct, dd->idProduct);
-+	printk("  bcdDevice: %d (0x%X)\n", dd->bcdDevice, dd->bcdDevice);
-+	printk("  iManufacturer: %d (0x%X)\n", dd->iManufacturer, dd->iManufacturer);
-+	printk("  iProduct: %d (0x%X)\n", dd->iProduct, dd->iProduct);
-+	printk("  iSerialNumber: %d (0x%X)\n", dd->iSerialNumber, dd->iSerialNumber);
-+	printk("  bNumConfigurations: %d (0x%X)\n", dd->bNumConfigurations, dd->bNumConfigurations);
-+}
-+#endif /* UNUSED */
-+
-+#endif /* ACX_DEBUG */
-Index: linux-2.6.23/drivers/net/wireless/acx/wlan.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/wlan.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,424 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** This code is based on elements which are
-+** Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-+** info@linux-wlan.com
-+** http://www.linux-wlan.com
-+*/
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/types.h>
-+#include <linux/if_arp.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+#define LOG_BAD_EID(hdr,len,ie_ptr) acx_log_bad_eid(hdr, len, ((wlan_ie_t*)ie_ptr))
-+
-+#define IE_EID(ie_ptr) (((wlan_ie_t*)(ie_ptr))->eid)
-+#define IE_LEN(ie_ptr) (((wlan_ie_t*)(ie_ptr))->len)
-+#define OFFSET(hdr,off) (WLAN_HDR_A3_DATAP(hdr) + (off))
-+
-+
-+/***********************************************************************
-+** wlan_mgmt_decode_XXX
-+**
-+** Given a complete frame in f->hdr, sets the pointers in f to
-+** the areas that correspond to the parts of the frame.
-+**
-+** Assumptions:
-+**	1) f->len and f->hdr are already set
-+**	2) f->len is the length of the MAC header + data, the FCS
-+**	   is NOT included
-+**	3) all members except len and hdr are zero
-+** Arguments:
-+**	f	frame structure
-+**
-+** Returns:
-+**	nothing
-+**
-+** Side effects:
-+**	frame structure members are pointing at their
-+**	respective portions of the frame buffer.
-+*/
-+void
-+wlan_mgmt_decode_beacon(wlan_fr_beacon_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_BEACON;
-+
-+	/*-- Fixed Fields ----*/
-+	f->ts = (u64 *) OFFSET(f->hdr, WLAN_BEACON_OFF_TS);
-+	f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_BCN_INT);
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_CAPINFO);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_BEACON_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_FH_PARMS:
-+			f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_DS_PARMS:
-+			f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_CF_PARMS:
-+			f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_IBSS_PARMS:
-+			f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_TIM:
-+			f->tim = (wlan_ie_tim_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_ERP_INFO:
-+			f->erp = (wlan_ie_erp_t *) ie_ptr;
-+			break;
-+
-+		case WLAN_EID_COUNTRY:
-+		/* was seen: 07 06 47 42 20 01 0D 14 */
-+		case WLAN_EID_PWR_CONSTRAINT:
-+		/* was seen by Ashwin Mansinghka <ashwin_man@yahoo.com> from
-+		Atheros-based PCI card in AP mode using madwifi drivers: */
-+		/* 20 01 00 */
-+		case WLAN_EID_NONERP:
-+		/* was seen from WRT54GS with OpenWrt: 2F 01 07 */
-+		case WLAN_EID_UNKNOWN128:
-+		/* was seen by Jacek Jablonski <conexion2000@gmail.com> from Orinoco AP */
-+		/* 80 06 00 60 1D 2C 3B 00 */
-+		case WLAN_EID_UNKNOWN133:
-+		/* was seen by David Bronaugh <dbronaugh@linuxboxen.org> from ???? */
-+		/* 85 1E 00 00 84 12 07 00 FF 00 11 00 61 70 63 31 */
-+		/* 63 73 72 30 34 32 00 00 00 00 00 00 00 00 00 25 */
-+		case WLAN_EID_UNKNOWN223:
-+		/* was seen by Carlos Martin <carlosmn@gmail.com> from ???? */
-+		/* DF 20 01 1E 04 00 00 00 06 63 09 02 FF 0F 30 30 */
-+		/* 30 42 36 42 33 34 30 39 46 31 00 00 00 00 00 00 00 00 */
-+		case WLAN_EID_GENERIC:
-+		/* WPA: hostap code:
-+			if (pos[1] >= 4 &&
-+				pos[2] == 0x00 && pos[3] == 0x50 &&
-+				pos[4] == 0xf2 && pos[5] == 1) {
-+				wpa = pos;
-+				wpa_len = pos[1] + 2;
-+			}
-+		TI x4 mode: seen DD 04 08 00 28 00
-+		(08 00 28 is TI's OUI)
-+		last byte is probably 0/1 - disabled/enabled
-+		*/
-+		case WLAN_EID_RSN:
-+		/* hostap does something with it:
-+			rsn = pos;
-+			rsn_len = pos[1] + 2;
-+		*/
-+			break;
-+
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+
-+
-+#ifdef UNUSED
-+void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t * f)
-+{
-+	f->type = WLAN_FSTYPE_ATIM;
-+	/*-- Fixed Fields ----*/
-+	/*-- Information elements */
-+}
-+#endif /* UNUSED */
-+
-+void
-+wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t * f)
-+{
-+	f->type = WLAN_FSTYPE_DISASSOC;
-+
-+	/*-- Fixed Fields ----*/
-+	f->reason = (u16 *) OFFSET(f->hdr, WLAN_DISASSOC_OFF_REASON);
-+
-+	/*-- Information elements */
-+}
-+
-+
-+void
-+wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+
-+	f->type = WLAN_FSTYPE_ASSOCREQ;
-+
-+	/*-- Fixed Fields ----*/
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_CAP_INFO);
-+	f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_LISTEN_INT);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+
-+
-+void
-+wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t * f)
-+{
-+	f->type = WLAN_FSTYPE_ASSOCRESP;
-+
-+	/*-- Fixed Fields ----*/
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_CAP_INFO);
-+	f->status = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_STATUS);
-+	f->aid = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_AID);
-+
-+	/*-- Information elements */
-+	f->supp_rates = (wlan_ie_supp_rates_t *)
-+			OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_SUPP_RATES);
-+}
-+
-+
-+#ifdef UNUSED
-+void
-+wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_REASSOCREQ;
-+
-+	/*-- Fixed Fields ----*/
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CAP_INFO);
-+	f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_LISTEN_INT);
-+	f->curr_ap = (u8 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CURR_AP);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+
-+
-+void
-+wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t * f)
-+{
-+	f->type = WLAN_FSTYPE_REASSOCRESP;
-+
-+	/*-- Fixed Fields ----*/
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_CAP_INFO);
-+	f->status = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_STATUS);
-+	f->aid = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_AID);
-+
-+	/*-- Information elements */
-+	f->supp_rates = (wlan_ie_supp_rates_t *)
-+			OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_SUPP_RATES);
-+}
-+
-+
-+void
-+wlan_mgmt_decode_probereq(wlan_fr_probereq_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_PROBEREQ;
-+
-+	/*-- Fixed Fields ----*/
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_PROBEREQ_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+#endif /* UNUSED */
-+
-+
-+/* TODO: decoding of beacon and proberesp can be merged (similar structure) */
-+void
-+wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_PROBERESP;
-+
-+	/*-- Fixed Fields ----*/
-+	f->ts = (u64 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_TS);
-+	f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_BCN_INT);
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_CAP_INFO);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_PROBERESP_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_FH_PARMS:
-+			f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_DS_PARMS:
-+			f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_CF_PARMS:
-+			f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_IBSS_PARMS:
-+			f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr;
-+			break;
-+#ifdef DONT_DO_IT_ADD_REAL_HANDLING_INSTEAD
-+		case WLAN_EID_COUNTRY:
-+			break;
-+		...
-+#endif
-+#ifdef SENT_HERE_BY_OPENWRT
-+		/* should those be trapped or handled?? */
-+		case WLAN_EID_ERP_INFO:
-+			break;
-+		case WLAN_EID_NONERP:
-+			break;
-+		case WLAN_EID_GENERIC:
-+			break;
-+#endif
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+
-+
-+void
-+wlan_mgmt_decode_authen(wlan_fr_authen_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_AUTHEN;
-+
-+	/*-- Fixed Fields ----*/
-+	f->auth_alg = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_ALG);
-+	f->auth_seq = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_SEQ);
-+	f->status = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_STATUS);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_AUTHEN_OFF_CHALLENGE);
-+	if ((ie_ptr < end) && (IE_EID(ie_ptr) == WLAN_EID_CHALLENGE)) {
-+		f->challenge = (wlan_ie_challenge_t *) ie_ptr;
-+	}
-+}
-+
-+
-+void
-+wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t * f)
-+{
-+	f->type = WLAN_FSTYPE_DEAUTHEN;
-+
-+	/*-- Fixed Fields ----*/
-+	f->reason = (u16 *) OFFSET(f->hdr, WLAN_DEAUTHEN_OFF_REASON);
-+
-+	/*-- Information elements */
-+}
-Index: linux-2.6.23/drivers/net/wireless/acx/wlan_compat.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/wlan_compat.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,260 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** This code is based on elements which are
-+** Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-+** info@linux-wlan.com
-+** http://www.linux-wlan.com
-+*/
-+
-+/*=============================================================*/
-+/*------ Establish Platform Identity --------------------------*/
-+/*=============================================================*/
-+/* Key macros: */
-+/* WLAN_CPU_FAMILY */
-+#define WLAN_Ix86			1
-+#define WLAN_PPC			2
-+#define WLAN_Ix96			3
-+#define WLAN_ARM			4
-+#define WLAN_ALPHA			5
-+#define WLAN_MIPS			6
-+#define WLAN_HPPA			7
-+#define WLAN_SPARC			8
-+#define WLAN_SH				9
-+#define WLAN_x86_64			10
-+/* WLAN_CPU_CORE */
-+#define WLAN_I386CORE			1
-+#define WLAN_PPCCORE			2
-+#define WLAN_I296			3
-+#define WLAN_ARMCORE			4
-+#define WLAN_ALPHACORE			5
-+#define WLAN_MIPSCORE			6
-+#define WLAN_HPPACORE			7
-+/* WLAN_CPU_PART */
-+#define WLAN_I386PART			1
-+#define WLAN_MPC860			2
-+#define WLAN_MPC823			3
-+#define WLAN_I296SA			4
-+#define WLAN_PPCPART			5
-+#define WLAN_ARMPART			6
-+#define WLAN_ALPHAPART			7
-+#define WLAN_MIPSPART			8
-+#define WLAN_HPPAPART			9
-+/* WLAN_SYSARCH */
-+#define WLAN_PCAT			1
-+#define WLAN_MBX			2
-+#define WLAN_RPX			3
-+#define WLAN_LWARCH			4
-+#define WLAN_PMAC			5
-+#define WLAN_SKIFF			6
-+#define WLAN_BITSY			7
-+#define WLAN_ALPHAARCH			7
-+#define WLAN_MIPSARCH			9
-+#define WLAN_HPPAARCH			10
-+/* WLAN_HOSTIF (generally set on the command line, not detected) */
-+#define WLAN_PCMCIA			1
-+#define WLAN_ISA			2
-+#define WLAN_PCI			3
-+#define WLAN_USB			4
-+#define WLAN_PLX			5
-+
-+/* Note: the PLX HOSTIF above refers to some vendors implementations for */
-+/*       PCI.  It's a PLX chip that is a PCI to PCMCIA adapter, but it   */
-+/*       isn't a real PCMCIA host interface adapter providing all the    */
-+/*       card&socket services.                                           */
-+
-+#ifdef __powerpc__
-+#ifndef __ppc__
-+#define __ppc__
-+#endif
-+#endif
-+
-+#if (defined(CONFIG_PPC) || defined(CONFIG_8xx))
-+#ifndef __ppc__
-+#define __ppc__
-+#endif
-+#endif
-+
-+#if defined(__x86_64__)
-+ #define WLAN_CPU_FAMILY	WLAN_x86_64
-+ #define WLAN_SYSARCH		WLAN_PCAT
-+#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__)
-+ #define WLAN_CPU_FAMILY	WLAN_Ix86
-+ #define WLAN_CPU_CORE		WLAN_I386CORE
-+ #define WLAN_CPU_PART		WLAN_I386PART
-+ #define WLAN_SYSARCH		WLAN_PCAT
-+#elif defined(__ppc__)
-+ #define WLAN_CPU_FAMILY	WLAN_PPC
-+ #define WLAN_CPU_CORE		WLAN_PPCCORE
-+ #if defined(CONFIG_MBX)
-+  #define WLAN_CPU_PART		WLAN_MPC860
-+  #define WLAN_SYSARCH		WLAN_MBX
-+ #elif defined(CONFIG_RPXLITE)
-+  #define WLAN_CPU_PART		WLAN_MPC823
-+  #define WLAN_SYSARCH		WLAN_RPX
-+ #elif defined(CONFIG_RPXCLASSIC)
-+  #define WLAN_CPU_PART		WLAN_MPC860
-+  #define WLAN_SYSARCH		WLAN_RPX
-+ #else
-+  #define WLAN_CPU_PART		WLAN_PPCPART
-+  #define WLAN_SYSARCH		WLAN_PMAC
-+ #endif
-+#elif defined(__arm__)
-+ #define WLAN_CPU_FAMILY	WLAN_ARM
-+ #define WLAN_CPU_CORE		WLAN_ARMCORE
-+ #define WLAN_CPU_PART		WLAN_ARM_PART
-+ #define WLAN_SYSARCH		WLAN_SKIFF
-+#elif defined(__alpha__)
-+ #define WLAN_CPU_FAMILY	WLAN_ALPHA
-+ #define WLAN_CPU_CORE		WLAN_ALPHACORE
-+ #define WLAN_CPU_PART		WLAN_ALPHAPART
-+ #define WLAN_SYSARCH		WLAN_ALPHAARCH
-+#elif defined(__mips__)
-+ #define WLAN_CPU_FAMILY	WLAN_MIPS
-+ #define WLAN_CPU_CORE		WLAN_MIPSCORE
-+ #define WLAN_CPU_PART		WLAN_MIPSPART
-+ #define WLAN_SYSARCH		WLAN_MIPSARCH
-+#elif defined(__hppa__)
-+ #define WLAN_CPU_FAMILY	WLAN_HPPA
-+ #define WLAN_CPU_CORE		WLAN_HPPACORE
-+ #define WLAN_CPU_PART		WLAN_HPPAPART
-+ #define WLAN_SYSARCH		WLAN_HPPAARCH
-+#elif defined(__sparc__)
-+ #define WLAN_CPU_FAMILY	WLAN_SPARC
-+ #define WLAN_SYSARCH		WLAN_SPARC
-+#elif defined(__sh__)
-+ #define WLAN_CPU_FAMILY	WLAN_SH
-+ #define WLAN_SYSARCH		WLAN_SHARCH
-+ #ifndef __LITTLE_ENDIAN__
-+  #define __LITTLE_ENDIAN__
-+ #endif
-+#else
-+ #error "No CPU identified!"
-+#endif
-+
-+/*
-+   Some big endian machines implicitly do all I/O in little endian mode.
-+
-+   In particular:
-+	  Linux/PPC on PowerMacs (PCI)
-+	  Arm/Intel Xscale (PCI)
-+
-+   This may also affect PLX boards and other BE &| PPC platforms;
-+   as new ones are discovered, add them below.
-+*/
-+
-+#if ((WLAN_SYSARCH == WLAN_SKIFF) || (WLAN_SYSARCH == WLAN_PMAC))
-+#define REVERSE_ENDIAN
-+#endif
-+
-+/*=============================================================*/
-+/*------ Hardware Portability Macros --------------------------*/
-+/*=============================================================*/
-+#if (WLAN_CPU_FAMILY == WLAN_PPC)
-+#define wlan_inw(a)                     in_be16((unsigned short *)((a)+_IO_BASE))
-+#define wlan_inw_le16_to_cpu(a)         inw((a))
-+#define wlan_outw(v,a)                  out_be16((unsigned short *)((a)+_IO_BASE), (v))
-+#define wlan_outw_cpu_to_le16(v,a)      outw((v),(a))
-+#else
-+#define wlan_inw(a)                     inw((a))
-+#define wlan_inw_le16_to_cpu(a)         __cpu_to_le16(inw((a)))
-+#define wlan_outw(v,a)                  outw((v),(a))
-+#define wlan_outw_cpu_to_le16(v,a)      outw(__cpu_to_le16((v)),(a))
-+#endif
-+
-+/*=============================================================*/
-+/*------ Bit settings -----------------------------------------*/
-+/*=============================================================*/
-+#define ieee2host16(n)	__le16_to_cpu(n)
-+#define ieee2host32(n)	__le32_to_cpu(n)
-+#define host2ieee16(n)	__cpu_to_le16(n)
-+#define host2ieee32(n)	__cpu_to_le32(n)
-+
-+/* for constants */
-+#ifdef __LITTLE_ENDIAN
-+ #define IEEE16(a,n)     a = n, a##i = n,
-+#else
-+ #ifdef __BIG_ENDIAN
-+  /* shifts would produce gcc warnings. Oh well... */
-+  #define IEEE16(a,n)     a = n, a##i = ((n&0xff)*256 + ((n&0xff00)/256)),
-+ #else
-+  #error give me endianness or give me death
-+ #endif
-+#endif
-+
-+/*=============================================================*/
-+/*------ Compiler Portability Macros --------------------------*/
-+/*=============================================================*/
-+#define WLAN_PACKED	__attribute__ ((packed))
-+
-+/* Interrupt handler backwards compatibility stuff */
-+#ifndef IRQ_NONE
-+#define IRQ_NONE
-+#define IRQ_HANDLED
-+typedef void irqreturn_t;
-+#endif
-+
-+#ifndef ARPHRD_IEEE80211_PRISM
-+#define ARPHRD_IEEE80211_PRISM 802
-+#endif
-+
-+#define ETH_P_80211_RAW		(ETH_P_ECONET + 1)
-+
-+/*============================================================================*
-+ * Constants                                                                  *
-+ *============================================================================*/
-+#define WLAN_IEEE_OUI_LEN	3
-+
-+/*============================================================================*
-+ * Types                                                                      *
-+ *============================================================================*/
-+
-+/* local ether header type */
-+typedef struct wlan_ethhdr {
-+	u8	daddr[ETH_ALEN];
-+	u8	saddr[ETH_ALEN];
-+	u16	type;
-+} WLAN_PACKED wlan_ethhdr_t;
-+
-+/* local llc header type */
-+typedef struct wlan_llc {
-+	u8	dsap;
-+	u8	ssap;
-+	u8	ctl;
-+} WLAN_PACKED wlan_llc_t;
-+
-+/* local snap header type */
-+typedef struct wlan_snap {
-+	u8	oui[WLAN_IEEE_OUI_LEN];
-+	u16	type;
-+} WLAN_PACKED wlan_snap_t;
-Index: linux-2.6.23/drivers/net/wireless/acx/wlan_hdr.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/wlan_hdr.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,497 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** This code is based on elements which are
-+** Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-+** info@linux-wlan.com
-+** http://www.linux-wlan.com
-+*/
-+
-+/* mini-doc
-+
-+Here are all 11b/11g/11a rates and modulations:
-+
-+     11b 11g 11a
-+     --- --- ---
-+ 1  |B  |B  |
-+ 2  |Q  |Q  |
-+ 5.5|Cp |C p|
-+ 6  |   |Od |O
-+ 9  |   |od |o
-+11  |Cp |C p|
-+12  |   |Od |O
-+18  |   |od |o
-+22  |   |  p|
-+24  |   |Od |O
-+33  |   |  p|
-+36  |   |od |o
-+48  |   |od |o
-+54  |   |od |o
-+
-+Mandatory:
-+ B - DBPSK (Differential Binary Phase Shift Keying)
-+ Q - DQPSK (Differential Quaternary Phase Shift Keying)
-+ C - CCK (Complementary Code Keying, a form of DSSS
-+		(Direct Sequence Spread Spectrum) modulation)
-+ O - OFDM (Orthogonal Frequency Division Multiplexing)
-+Optional:
-+ o - OFDM
-+ d - CCK-OFDM (also known as DSSS-OFDM)
-+ p - PBCC (Packet Binary Convolutional Coding)
-+
-+The term CCK-OFDM may be used interchangeably with DSSS-OFDM
-+(the IEEE 802.11g-2003 standard uses the latter terminology).
-+In the CCK-OFDM, the PLCP header of the frame uses the CCK form of DSSS,
-+while the PLCP payload (the MAC frame) is modulated using OFDM.
-+
-+Basically, you must use CCK-OFDM if you have mixed 11b/11g environment,
-+or else (pure OFDM) 11b equipment may not realize that AP
-+is sending a packet and start sending its own one.
-+Sadly, looks like acx111 does not support CCK-OFDM, only pure OFDM.
-+
-+Re PBCC: avoid using it. It makes sense only if you have
-+TI "11b+" hardware. You _must_ use PBCC in order to reach 22Mbps on it.
-+
-+Preambles:
-+
-+Long preamble (at 1Mbit rate, takes 144 us):
-+    16 bytes	ones
-+     2 bytes	0xF3A0 (lsb sent first)
-+PLCP header follows (at 1Mbit also):
-+     1 byte	Signal: speed, in 0.1Mbit units, except for:
-+		33Mbit: 33 (instead of 330 - doesn't fit in octet)
-+		all CCK-OFDM rates: 30
-+     1 byte	Service
-+	0,1,4:	reserved
-+	2:	1=locked clock
-+	3:	1=PBCC
-+	5:	Length Extension (PBCC 22,33Mbit (11g only))  <-
-+	6:	Length Extension (PBCC 22,33Mbit (11g only))  <- BLACK MAGIC HERE
-+	7:	Length Extension                              <-
-+     2 bytes	Length (time needed to tx this frame)
-+		a) 5.5 Mbit/s CCK
-+		   Length = octets*8/5.5, rounded up to integer
-+		b) 11 Mbit/s CCK
-+		   Length = octets*8/11, rounded up to integer
-+		   Service bit 7:
-+			0 = rounding took less than 8/11
-+			1 = rounding took more than or equal to 8/11
-+		c) 5.5 Mbit/s PBCC
-+		   Length = (octets+1)*8/5.5, rounded up to integer
-+		d) 11 Mbit/s PBCC
-+		   Length = (octets+1)*8/11, rounded up to integer
-+		   Service bit 7:
-+			0 = rounding took less than 8/11
-+			1 = rounding took more than or equal to 8/11
-+		e) 22 Mbit/s PBCC
-+		   Length = (octets+1)*8/22, rounded up to integer
-+		   Service bits 6,7:
-+			00 = rounding took less than 8/22ths
-+			01 = rounding took 8/22...15/22ths
-+			10 = rounding took 16/22ths or more.
-+		f) 33 Mbit/s PBCC
-+		   Length = (octets+1)*8/33, rounded up to integer
-+		   Service bits 5,6,7:
-+			000 rounding took less than 8/33
-+			001 rounding took 8/33...15/33
-+			010 rounding took 16/33...23/33
-+			011 rounding took 24/33...31/33
-+			100 rounding took 32/33 or more
-+     2 bytes	CRC
-+
-+PSDU follows (up to 2346 bytes at selected rate)
-+
-+While Signal value alone is not enough to determine rate and modulation,
-+Signal+Service is always sufficient.
-+
-+Short preamble (at 1Mbit rate, takes 72 us):
-+     7 bytes	zeroes
-+     2 bytes	0x05CF (lsb sent first)
-+PLCP header follows *at 2Mbit/s*. Format is the same as in long preamble.
-+PSDU follows (up to 2346 bytes at selected rate)
-+
-+OFDM preamble is completely different, uses OFDM
-+modulation from the start and thus easily identifiable.
-+Not shown here.
-+*/
-+
-+
-+/***********************************************************************
-+** Constants
-+*/
-+
-+#define WLAN_HDR_A3_LEN			24
-+#define WLAN_HDR_A4_LEN			30
-+/* IV structure:
-+** 3 bytes: Initialization Vector (24 bits)
-+** 1 byte: 0..5: padding, must be 0; 6..7: key selector (0-3)
-+*/
-+#define WLAN_WEP_IV_LEN			4
-+/* 802.11 says 2312 but looks like 2312 is a max size of _WEPed data_ */
-+#define WLAN_DATA_MAXLEN		2304
-+#define WLAN_WEP_ICV_LEN		4
-+#define WLAN_FCS_LEN			4
-+#define WLAN_A3FR_MAXLEN		(WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN)
-+#define WLAN_A4FR_MAXLEN		(WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN)
-+#define WLAN_A3FR_MAXLEN_FCS		(WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN + 4)
-+#define WLAN_A4FR_MAXLEN_FCS		(WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + 4)
-+#define WLAN_A3FR_MAXLEN_WEP		(WLAN_A3FR_MAXLEN + 8)
-+#define WLAN_A4FR_MAXLEN_WEP		(WLAN_A4FR_MAXLEN + 8)
-+#define WLAN_A3FR_MAXLEN_WEP_FCS	(WLAN_A3FR_MAXLEN_FCS + 8)
-+#define WLAN_A4FR_MAXLEN_WEP_FCS	(WLAN_A4FR_MAXLEN_FCS + 8)
-+
-+#define WLAN_BSS_TS_LEN			8
-+#define WLAN_SSID_MAXLEN		32
-+#define WLAN_BEACON_FR_MAXLEN		(WLAN_HDR_A3_LEN + 334)
-+#define WLAN_ATIM_FR_MAXLEN		(WLAN_HDR_A3_LEN + 0)
-+#define WLAN_DISASSOC_FR_MAXLEN		(WLAN_HDR_A3_LEN + 2)
-+#define WLAN_ASSOCREQ_FR_MAXLEN		(WLAN_HDR_A3_LEN + 48)
-+#define WLAN_ASSOCRESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 16)
-+#define WLAN_REASSOCREQ_FR_MAXLEN	(WLAN_HDR_A3_LEN + 54)
-+#define WLAN_REASSOCRESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 16)
-+#define WLAN_PROBEREQ_FR_MAXLEN		(WLAN_HDR_A3_LEN + 44)
-+#define WLAN_PROBERESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 78)
-+#define WLAN_AUTHEN_FR_MAXLEN		(WLAN_HDR_A3_LEN + 261)
-+#define WLAN_DEAUTHEN_FR_MAXLEN		(WLAN_HDR_A3_LEN + 2)
-+#define WLAN_CHALLENGE_IE_LEN		130
-+#define WLAN_CHALLENGE_LEN		128
-+#define WLAN_WEP_MAXKEYLEN		13
-+#define WLAN_WEP_NKEYS			4
-+
-+/*--- Frame Control Field -------------------------------------*/
-+/* Frame Types */
-+#define WLAN_FTYPE_MGMT			0x00
-+#define WLAN_FTYPE_CTL			0x01
-+#define WLAN_FTYPE_DATA			0x02
-+
-+/* Frame subtypes */
-+/* Management */
-+#define WLAN_FSTYPE_ASSOCREQ		0x00
-+#define WLAN_FSTYPE_ASSOCRESP		0x01
-+#define WLAN_FSTYPE_REASSOCREQ		0x02
-+#define WLAN_FSTYPE_REASSOCRESP		0x03
-+#define WLAN_FSTYPE_PROBEREQ		0x04
-+#define WLAN_FSTYPE_PROBERESP		0x05
-+#define WLAN_FSTYPE_BEACON		0x08
-+#define WLAN_FSTYPE_ATIM		0x09
-+#define WLAN_FSTYPE_DISASSOC		0x0a
-+#define WLAN_FSTYPE_AUTHEN		0x0b
-+#define WLAN_FSTYPE_DEAUTHEN		0x0c
-+
-+/* Control */
-+#define WLAN_FSTYPE_PSPOLL		0x0a
-+#define WLAN_FSTYPE_RTS			0x0b
-+#define WLAN_FSTYPE_CTS			0x0c
-+#define WLAN_FSTYPE_ACK			0x0d
-+#define WLAN_FSTYPE_CFEND		0x0e
-+#define WLAN_FSTYPE_CFENDCFACK		0x0f
-+
-+/* Data */
-+#define WLAN_FSTYPE_DATAONLY		0x00
-+#define WLAN_FSTYPE_DATA_CFACK		0x01
-+#define WLAN_FSTYPE_DATA_CFPOLL		0x02
-+#define WLAN_FSTYPE_DATA_CFACK_CFPOLL	0x03
-+#define WLAN_FSTYPE_NULL		0x04
-+#define WLAN_FSTYPE_CFACK		0x05
-+#define WLAN_FSTYPE_CFPOLL		0x06
-+#define WLAN_FSTYPE_CFACK_CFPOLL	0x07
-+
-+/*--- FC Constants v. 2.0 ------------------------------------*/
-+/* Each constant is defined twice: WF_CONST is in host        */
-+/* byteorder, WF_CONSTi is in ieee byteorder.                 */
-+/* Usage:                                                     */
-+/* printf("the frame subtype is %X", WF_FC_FTYPEi & rx.fc);   */
-+/* tx.fc = WF_FTYPE_CTLi | WF_FSTYPE_RTSi;                    */
-+/*------------------------------------------------------------*/
-+
-+enum {
-+/*--- Frame Control Field -------------------------------------*/
-+/* Protocol version: always 0 for current 802.11 standards */
-+IEEE16(WF_FC_PVER,			0x0003)
-+IEEE16(WF_FC_FTYPE,			0x000c)
-+IEEE16(WF_FC_FSTYPE,			0x00f0)
-+IEEE16(WF_FC_TODS,			0x0100)
-+IEEE16(WF_FC_FROMDS,			0x0200)
-+IEEE16(WF_FC_FROMTODS,			0x0300)
-+IEEE16(WF_FC_MOREFRAG,			0x0400)
-+IEEE16(WF_FC_RETRY,			0x0800)
-+/* Indicates PS mode in which STA will be after successful completion
-+** of current frame exchange sequence. Always 0 for AP frames */
-+IEEE16(WF_FC_PWRMGT,			0x1000)
-+/* What MoreData=1 means:
-+** From AP to STA in PS mode: don't sleep yet, I have more frames for you
-+** From Contention-Free (CF) Pollable STA in response to a CF-Poll:
-+**   STA has buffered frames for transmission in response to next CF-Poll
-+** Bcast/mcast frames transmitted from AP:
-+**   when additional bcast/mcast frames remain to be transmitted by AP
-+**   during this beacon interval
-+** In all other cases MoreData=0 */
-+IEEE16(WF_FC_MOREDATA,			0x2000)
-+IEEE16(WF_FC_ISWEP,			0x4000)
-+IEEE16(WF_FC_ORDER,			0x8000)
-+
-+/* Frame Types */
-+IEEE16(WF_FTYPE_MGMT,			0x00)
-+IEEE16(WF_FTYPE_CTL,			0x04)
-+IEEE16(WF_FTYPE_DATA,			0x08)
-+
-+/* Frame subtypes */
-+/* Management */
-+IEEE16(WF_FSTYPE_ASSOCREQ,		0x00)
-+IEEE16(WF_FSTYPE_ASSOCRESP,		0x10)
-+IEEE16(WF_FSTYPE_REASSOCREQ,		0x20)
-+IEEE16(WF_FSTYPE_REASSOCRESP,		0x30)
-+IEEE16(WF_FSTYPE_PROBEREQ,		0x40)
-+IEEE16(WF_FSTYPE_PROBERESP,		0x50)
-+IEEE16(WF_FSTYPE_BEACON,		0x80)
-+IEEE16(WF_FSTYPE_ATIM,			0x90)
-+IEEE16(WF_FSTYPE_DISASSOC,		0xa0)
-+IEEE16(WF_FSTYPE_AUTHEN,		0xb0)
-+IEEE16(WF_FSTYPE_DEAUTHEN,		0xc0)
-+
-+/* Control */
-+IEEE16(WF_FSTYPE_PSPOLL,		0xa0)
-+IEEE16(WF_FSTYPE_RTS,			0xb0)
-+IEEE16(WF_FSTYPE_CTS,			0xc0)
-+IEEE16(WF_FSTYPE_ACK,			0xd0)
-+IEEE16(WF_FSTYPE_CFEND,			0xe0)
-+IEEE16(WF_FSTYPE_CFENDCFACK,		0xf0)
-+
-+/* Data */
-+IEEE16(WF_FSTYPE_DATAONLY,		0x00)
-+IEEE16(WF_FSTYPE_DATA_CFACK,		0x10)
-+IEEE16(WF_FSTYPE_DATA_CFPOLL,		0x20)
-+IEEE16(WF_FSTYPE_DATA_CFACK_CFPOLL,	0x30)
-+IEEE16(WF_FSTYPE_NULL,			0x40)
-+IEEE16(WF_FSTYPE_CFACK,			0x50)
-+IEEE16(WF_FSTYPE_CFPOLL,		0x60)
-+IEEE16(WF_FSTYPE_CFACK_CFPOLL,		0x70)
-+};
-+
-+
-+/***********************************************************************
-+** Macros
-+*/
-+
-+/*--- Duration Macros ----------------------------------------*/
-+/* Macros to get/set the bitfields of the Duration Field      */
-+/*  - the duration value is only valid when bit15 is zero     */
-+/*  - the firmware handles these values, so I'm not going     */
-+/*    to use these macros right now.                          */
-+/*------------------------------------------------------------*/
-+
-+/*--- Sequence Control  Macros -------------------------------*/
-+/* Macros to get/set the bitfields of the Sequence Control    */
-+/* Field.                                                     */
-+/*------------------------------------------------------------*/
-+#define WLAN_GET_SEQ_FRGNUM(n) ((u16)(n) & 0x000f)
-+#define WLAN_GET_SEQ_SEQNUM(n) (((u16)(n) & 0xfff0) >> 4)
-+
-+/*--- Data ptr macro -----------------------------------------*/
-+/* Creates a u8* to the data portion of a frame               */
-+/* Assumes you're passing in a ptr to the beginning of the hdr*/
-+/*------------------------------------------------------------*/
-+#define WLAN_HDR_A3_DATAP(p) (((u8*)(p)) + WLAN_HDR_A3_LEN)
-+#define WLAN_HDR_A4_DATAP(p) (((u8*)(p)) + WLAN_HDR_A4_LEN)
-+
-+
-+/***********************************************************************
-+** Types
-+*/
-+
-+/* 802.11 header type
-+**
-+** Note the following:
-+** a1 *always* is receiver's mac or bcast/mcast
-+** a2 *always* is transmitter's mac, if a2 exists
-+** seq: [0:3] frag#, [4:15] seq# - used for dup detection
-+** (dups from retries have same seq#) */
-+typedef struct wlan_hdr {
-+	u16	fc;
-+	u16	dur;
-+	u8	a1[ETH_ALEN];
-+	u8	a2[ETH_ALEN];
-+	u8	a3[ETH_ALEN];
-+	u16	seq;
-+	u8	a4[ETH_ALEN];
-+} WLAN_PACKED wlan_hdr_t;
-+
-+/* Separate structs for use if frame type is known */
-+typedef struct wlan_hdr_a3 {
-+	u16	fc;
-+	u16	dur;
-+	u8	a1[ETH_ALEN];
-+	u8	a2[ETH_ALEN];
-+	u8	a3[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED wlan_hdr_a3_t;
-+
-+typedef struct wlan_hdr_mgmt {
-+	u16	fc;
-+	u16	dur;
-+	u8	da[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED wlan_hdr_mgmt_t;
-+
-+#ifdef NOT_NEEDED_YET
-+typedef struct { /* ad-hoc peer->peer (to/from DS = 0/0) */
-+	u16	fc;
-+	u16	dur;
-+	u8	da[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED ibss;
-+typedef struct { /* ap->sta (to/from DS = 0/1) */
-+	u16	fc;
-+	u16	dur;
-+	u8	da[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED fromap;
-+typedef struct { /* sta->ap (to/from DS = 1/0) */
-+	u16	fc;
-+	u16	dur;
-+	u8	bssid[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u8	da[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED toap;
-+typedef struct { /* wds->wds (to/from DS = 1/1), the only 4addr pkt */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+	u8	ta[ETH_ALEN];
-+	u8	da[ETH_ALEN];
-+	u16	seq;
-+	u8	sa[ETH_ALEN];
-+} WLAN_PACKED wds;
-+typedef struct { /* all management packets */
-+	u16	fc;
-+	u16	dur;
-+	u8	da[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED mgmt;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+	u8	ta[ETH_ALEN];
-+} WLAN_PACKED rts;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+} WLAN_PACKED cts;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+} WLAN_PACKED ack;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	/* NB: this one holds Assoc ID in dur field: */
-+	u16	aid;
-+	u8	bssid[ETH_ALEN];
-+	u8	ta[ETH_ALEN];
-+} WLAN_PACKED pspoll;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+} WLAN_PACKED cfend;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+} WLAN_PACKED cfendcfack;
-+#endif
-+
-+/* Prism header emulation (monitor mode) */
-+typedef struct wlanitem_u32 {
-+	u32	did;
-+	u16	status;
-+	u16	len;
-+	u32	data;
-+} WLAN_PACKED wlanitem_u32_t;
-+#define WLANITEM_STATUS_data_ok			0
-+#define WLANITEM_STATUS_no_value		1
-+#define WLANITEM_STATUS_invalid_itemname	2
-+#define WLANITEM_STATUS_invalid_itemdata	3
-+#define WLANITEM_STATUS_missing_itemdata	4
-+#define WLANITEM_STATUS_incomplete_itemdata	5
-+#define WLANITEM_STATUS_invalid_msg_did		6
-+#define WLANITEM_STATUS_invalid_mib_did		7
-+#define WLANITEM_STATUS_missing_conv_func	8
-+#define WLANITEM_STATUS_string_too_long		9
-+#define WLANITEM_STATUS_data_out_of_range	10
-+#define WLANITEM_STATUS_string_too_short	11
-+#define WLANITEM_STATUS_missing_valid_func	12
-+#define WLANITEM_STATUS_unknown			13
-+#define WLANITEM_STATUS_invalid_did		14
-+#define WLANITEM_STATUS_missing_print_func	15
-+
-+#define WLAN_DEVNAMELEN_MAX	16
-+typedef struct wlansniffrm {
-+	u32		msgcode;
-+	u32		msglen;
-+	u8		devname[WLAN_DEVNAMELEN_MAX];
-+	wlanitem_u32_t	hosttime;
-+	wlanitem_u32_t	mactime;
-+	wlanitem_u32_t	channel;
-+	wlanitem_u32_t	rssi;
-+	wlanitem_u32_t	sq;
-+	wlanitem_u32_t	signal;
-+	wlanitem_u32_t	noise;
-+	wlanitem_u32_t	rate;
-+	wlanitem_u32_t	istx;	/* tx? 0:no 1:yes */
-+	wlanitem_u32_t	frmlen;
-+} WLAN_PACKED wlansniffrm_t;
-+#define WLANSNIFFFRM		0x0041
-+#define WLANSNIFFFRM_hosttime	0x1041
-+#define WLANSNIFFFRM_mactime	0x2041
-+#define WLANSNIFFFRM_channel	0x3041
-+#define WLANSNIFFFRM_rssi	0x4041
-+#define WLANSNIFFFRM_sq		0x5041
-+#define WLANSNIFFFRM_signal	0x6041
-+#define WLANSNIFFFRM_noise	0x7041
-+#define WLANSNIFFFRM_rate	0x8041
-+#define WLANSNIFFFRM_istx	0x9041
-+#define WLANSNIFFFRM_frmlen	0xA041
-Index: linux-2.6.23/drivers/net/wireless/acx/wlan_mgmt.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/wlan_mgmt.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,582 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** This code is based on elements which are
-+** Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-+** info@linux-wlan.com
-+** http://www.linux-wlan.com
-+*/
-+
-+/***********************************************************************
-+** Constants
-+*/
-+
-+/*-- Information Element IDs --------------------*/
-+#define WLAN_EID_SSID		0
-+#define WLAN_EID_SUPP_RATES	1
-+#define WLAN_EID_FH_PARMS	2
-+#define WLAN_EID_DS_PARMS	3
-+#define WLAN_EID_CF_PARMS	4
-+#define WLAN_EID_TIM		5
-+#define WLAN_EID_IBSS_PARMS	6
-+#define WLAN_EID_COUNTRY	7 /* 802.11d */
-+#define WLAN_EID_FH_HOP_PARMS	8 /* 802.11d */
-+#define WLAN_EID_FH_TABLE	9 /* 802.11d */
-+#define WLAN_EID_REQUEST	10 /* 802.11d */
-+/*-- values 11-15 reserved --*/
-+#define WLAN_EID_CHALLENGE	16
-+/*-- values 17-31 reserved for challenge text extension --*/
-+#define WLAN_EID_PWR_CONSTRAINT	32	/* 11h PowerConstraint */
-+#define WLAN_EID_ERP_INFO	42	/* was seen from WRT54GS with OpenWrt */
-+#define WLAN_EID_NONERP		47	/* was seen from WRT54GS with OpenWrt */
-+#define WLAN_EID_RSN		48
-+#define WLAN_EID_EXT_RATES	50
-+#define WLAN_EID_UNKNOWN128	128
-+#define WLAN_EID_UNKNOWN133	133
-+#define WLAN_EID_GENERIC	221	/* was seen from WRT54GS with OpenWrt */
-+#define WLAN_EID_UNKNOWN223	223
-+
-+#if 0
-+#define WLAN_EID_PWR_CAP		33	/* 11h PowerCapability */
-+#define WLAN_EID_TPC_REQUEST		34	/* 11h TPC Request */
-+#define WLAN_EID_TPC_REPORT		35	/* 11h TPC Report */
-+#define WLAN_EID_SUPP_CHANNELS		36	/* 11h Supported Channels */
-+#define WLAN_EID_CHANNEL_SWITCH		37	/* 11h ChannelSwitch */
-+#define WLAN_EID_MEASURE_REQUEST	38	/* 11h MeasurementRequest */
-+#define WLAN_EID_MEASURE_REPORT		39	/* 11h MeasurementReport */
-+#define WLAN_EID_QUIET_ID		40	/* 11h Quiet */
-+#define WLAN_EID_IBSS_DFS_ID		41	/* 11h IBSS_DFS */
-+#endif
-+
-+/*-- Reason Codes -------------------------------*/
-+#define WLAN_MGMT_REASON_RSVD			0
-+#define WLAN_MGMT_REASON_UNSPEC			1
-+#define WLAN_MGMT_REASON_PRIOR_AUTH_INVALID	2
-+#define WLAN_MGMT_REASON_DEAUTH_LEAVING		3
-+#define WLAN_MGMT_REASON_DISASSOC_INACTIVE	4
-+#define WLAN_MGMT_REASON_DISASSOC_AP_BUSY	5
-+#define WLAN_MGMT_REASON_CLASS2_NONAUTH		6
-+#define WLAN_MGMT_REASON_CLASS3_NONASSOC	7
-+#define WLAN_MGMT_REASON_DISASSOC_STA_HASLEFT	8
-+#define WLAN_MGMT_REASON_CANT_ASSOC_NONAUTH	9
-+
-+/*-- Status Codes -------------------------------*/
-+#define WLAN_MGMT_STATUS_SUCCESS		0
-+#define WLAN_MGMT_STATUS_UNSPEC_FAILURE		1
-+#define WLAN_MGMT_STATUS_CAPS_UNSUPPORTED	10
-+#define WLAN_MGMT_STATUS_REASSOC_NO_ASSOC	11
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_UNSPEC	12
-+#define WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG	13
-+#define WLAN_MGMT_STATUS_RX_AUTH_NOSEQ		14
-+#define WLAN_MGMT_STATUS_CHALLENGE_FAIL		15
-+#define WLAN_MGMT_STATUS_AUTH_TIMEOUT		16
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_BUSY	17
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_RATES	18
-+/* p80211b additions */
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOSHORT	19
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOPBCC	20
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOAGILITY	21
-+
-+/*-- Auth Algorithm Field ---------------------------*/
-+#define WLAN_AUTH_ALG_OPENSYSTEM		0
-+#define WLAN_AUTH_ALG_SHAREDKEY			1
-+
-+/*-- Management Frame Field Offsets -------------*/
-+/* Note: Not all fields are listed because of variable lengths */
-+/* Note: These offsets are from the start of the frame data */
-+
-+#define WLAN_BEACON_OFF_TS			0
-+#define WLAN_BEACON_OFF_BCN_INT			8
-+#define WLAN_BEACON_OFF_CAPINFO			10
-+#define WLAN_BEACON_OFF_SSID			12
-+
-+#define WLAN_DISASSOC_OFF_REASON		0
-+
-+#define WLAN_ASSOCREQ_OFF_CAP_INFO		0
-+#define WLAN_ASSOCREQ_OFF_LISTEN_INT		2
-+#define WLAN_ASSOCREQ_OFF_SSID			4
-+
-+#define WLAN_ASSOCRESP_OFF_CAP_INFO		0
-+#define WLAN_ASSOCRESP_OFF_STATUS		2
-+#define WLAN_ASSOCRESP_OFF_AID			4
-+#define WLAN_ASSOCRESP_OFF_SUPP_RATES		6
-+
-+#define WLAN_REASSOCREQ_OFF_CAP_INFO		0
-+#define WLAN_REASSOCREQ_OFF_LISTEN_INT		2
-+#define WLAN_REASSOCREQ_OFF_CURR_AP		4
-+#define WLAN_REASSOCREQ_OFF_SSID		10
-+
-+#define WLAN_REASSOCRESP_OFF_CAP_INFO		0
-+#define WLAN_REASSOCRESP_OFF_STATUS		2
-+#define WLAN_REASSOCRESP_OFF_AID		4
-+#define WLAN_REASSOCRESP_OFF_SUPP_RATES		6
-+
-+#define WLAN_PROBEREQ_OFF_SSID			0
-+
-+#define WLAN_PROBERESP_OFF_TS			0
-+#define WLAN_PROBERESP_OFF_BCN_INT		8
-+#define WLAN_PROBERESP_OFF_CAP_INFO		10
-+#define WLAN_PROBERESP_OFF_SSID			12
-+
-+#define WLAN_AUTHEN_OFF_AUTH_ALG		0
-+#define WLAN_AUTHEN_OFF_AUTH_SEQ		2
-+#define WLAN_AUTHEN_OFF_STATUS			4
-+#define WLAN_AUTHEN_OFF_CHALLENGE		6
-+
-+#define WLAN_DEAUTHEN_OFF_REASON		0
-+
-+enum {
-+IEEE16(WF_MGMT_CAP_ESS,		0x0001)
-+IEEE16(WF_MGMT_CAP_IBSS,	0x0002)
-+/* In (re)assoc request frames by STA:
-+** Pollable=0, PollReq=0: STA is not CF-Pollable
-+** 0 1: STA is CF-Pollable, not requesting to be placed on the CF-Polling list
-+** 1 0: STA is CF-Pollable, requesting to be placed on the CF-Polling list
-+** 1 1: STA is CF-Pollable, requesting never to be polled
-+** In beacon, proberesp, (re)assoc resp frames by AP:
-+** 0 0: No point coordinator at AP
-+** 0 1: Point coordinator at AP for delivery only (no polling)
-+** 1 0: Point coordinator at AP for delivery and polling
-+** 1 1: Reserved  */
-+IEEE16(WF_MGMT_CAP_CFPOLLABLE,	0x0004)
-+IEEE16(WF_MGMT_CAP_CFPOLLREQ,	0x0008)
-+/* 1=non-WEP data frames are disallowed */
-+IEEE16(WF_MGMT_CAP_PRIVACY,	0x0010)
-+/* In beacon,  proberesp, (re)assocresp by AP/AdHoc:
-+** 1=use of shortpre is allowed ("I can receive shortpre") */
-+IEEE16(WF_MGMT_CAP_SHORT,	0x0020)
-+IEEE16(WF_MGMT_CAP_PBCC,	0x0040)
-+IEEE16(WF_MGMT_CAP_AGILITY,	0x0080)
-+/* In (re)assoc request frames by STA:
-+** 1=short slot time implemented and enabled
-+**   NB: AP shall use long slot time beginning at the next Beacon after assoc
-+**   of STA with this bit set to 0
-+** In beacon, proberesp, (re)assoc resp frames by AP:
-+** currently used slot time value: 0/1 - long/short */
-+IEEE16(WF_MGMT_CAP_SHORTSLOT,	0x0400)
-+/* In (re)assoc request frames by STA: 1=CCK-OFDM is implemented and enabled
-+** In beacon, proberesp, (re)assoc resp frames by AP/AdHoc:
-+** 1=CCK-OFDM is allowed */
-+IEEE16(WF_MGMT_CAP_CCKOFDM,	0x2000)
-+};
-+
-+
-+/***********************************************************************
-+** Types
-+*/
-+
-+/* Information Element types */
-+
-+/* prototype structure, all IEs start with these members */
-+typedef struct wlan_ie {
-+	u8 eid;
-+	u8 len;
-+} WLAN_PACKED wlan_ie_t;
-+
-+/*-- Service Set Identity (SSID)  -----------------*/
-+typedef struct wlan_ie_ssid {
-+	u8 eid;
-+	u8 len;
-+	u8 ssid[1];	/* may be zero */
-+} WLAN_PACKED wlan_ie_ssid_t;
-+
-+/*-- Supported Rates  -----------------------------*/
-+typedef struct wlan_ie_supp_rates {
-+	u8 eid;
-+	u8 len;
-+	u8 rates[1];	/* had better be at LEAST one! */
-+} WLAN_PACKED wlan_ie_supp_rates_t;
-+
-+/*-- FH Parameter Set  ----------------------------*/
-+typedef struct wlan_ie_fh_parms {
-+	u8 eid;
-+	u8 len;
-+	u16 dwell;
-+	u8 hopset;
-+	u8 hoppattern;
-+	u8 hopindex;
-+} WLAN_PACKED wlan_ie_fh_parms_t;
-+
-+/*-- DS Parameter Set  ----------------------------*/
-+typedef struct wlan_ie_ds_parms {
-+	u8 eid;
-+	u8 len;
-+	u8 curr_ch;
-+} WLAN_PACKED wlan_ie_ds_parms_t;
-+
-+/*-- CF Parameter Set  ----------------------------*/
-+typedef struct wlan_ie_cf_parms {
-+	u8 eid;
-+	u8 len;
-+	u8 cfp_cnt;
-+	u8 cfp_period;
-+	u16 cfp_maxdur;
-+	u16 cfp_durremaining;
-+} WLAN_PACKED wlan_ie_cf_parms_t;
-+
-+/*-- TIM ------------------------------------------*/
-+typedef struct wlan_ie_tim {
-+	u8 eid;
-+	u8 len;
-+	u8 dtim_cnt;
-+	u8 dtim_period;
-+	u8 bitmap_ctl;
-+	u8 virt_bm[1];
-+} WLAN_PACKED wlan_ie_tim_t;
-+
-+/*-- IBSS Parameter Set ---------------------------*/
-+typedef struct wlan_ie_ibss_parms {
-+	u8 eid;
-+	u8 len;
-+	u16 atim_win;
-+} WLAN_PACKED wlan_ie_ibss_parms_t;
-+
-+/*-- Challenge Text  ------------------------------*/
-+typedef struct wlan_ie_challenge {
-+	u8 eid;
-+	u8 len;
-+	u8 challenge[1];
-+} WLAN_PACKED wlan_ie_challenge_t;
-+
-+/*-- ERP (42) -------------------------------------*/
-+typedef struct wlan_ie_erp {
-+	u8 eid;
-+	u8 len;
-+	/* bit 0:Non ERP present
-+	**     1:Use Protection
-+	**     2:Barker Preamble mode
-+	**     3-7:reserved */
-+	u8 erp;
-+} WLAN_PACKED wlan_ie_erp_t;
-+
-+/* Types for parsing mgmt frames */
-+
-+/* prototype structure, all mgmt frame types will start with these members */
-+typedef struct wlan_fr_mgmt {
-+	u16 type;
-+	u16 len;		/* DOES NOT include FCS */
-+	wlan_hdr_t *hdr;
-+	/* used for target specific data, skb in Linux */
-+	/*-- fixed fields -----------*/
-+	/*-- info elements ----------*/
-+} WLAN_PACKED wlan_fr_mgmt_t;
-+
-+/*-- Beacon ---------------------------------------*/
-+typedef struct wlan_fr_beacon {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u64 *ts;
-+	u16 *bcn_int;
-+	u16 *cap_info;
-+	/*-- info elements ----------*/
-+	wlan_ie_ssid_t *ssid;
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+	wlan_ie_fh_parms_t *fh_parms;
-+	wlan_ie_ds_parms_t *ds_parms;
-+	wlan_ie_cf_parms_t *cf_parms;
-+	wlan_ie_ibss_parms_t *ibss_parms;
-+	wlan_ie_tim_t *tim;	/* in beacon only, not proberesp */
-+	wlan_ie_erp_t *erp;	/* in beacon only, not proberesp */
-+} wlan_fr_beacon_t;
-+#define wlan_fr_proberesp wlan_fr_beacon
-+#define wlan_fr_proberesp_t wlan_fr_beacon_t
-+
-+/*-- IBSS ATIM ------------------------------------*/
-+typedef struct wlan_fr_ibssatim {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	/*-- info elements ----------*/
-+	/* this frame type has a null body */
-+} wlan_fr_ibssatim_t;
-+
-+/*-- Disassociation -------------------------------*/
-+typedef struct wlan_fr_disassoc {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *reason;
-+	/*-- info elements ----------*/
-+} wlan_fr_disassoc_t;
-+
-+/*-- Association Request --------------------------*/
-+typedef struct wlan_fr_assocreq {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *cap_info;
-+	u16 *listen_int;
-+	/*-- info elements ----------*/
-+	wlan_ie_ssid_t *ssid;
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_assocreq_t;
-+
-+/*-- Association Response -------------------------*/
-+typedef struct wlan_fr_assocresp {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *cap_info;
-+	u16 *status;
-+	u16 *aid;
-+	/*-- info elements ----------*/
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_assocresp_t;
-+
-+/*-- Reassociation Request ------------------------*/
-+typedef struct wlan_fr_reassocreq {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *cap_info;
-+	u16 *listen_int;
-+	u8 *curr_ap;
-+	/*-- info elements ----------*/
-+	wlan_ie_ssid_t *ssid;
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_reassocreq_t;
-+
-+/*-- Reassociation Response -----------------------*/
-+typedef struct wlan_fr_reassocresp {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *cap_info;
-+	u16 *status;
-+	u16 *aid;
-+	/*-- info elements ----------*/
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_reassocresp_t;
-+
-+/*-- Probe Request --------------------------------*/
-+typedef struct wlan_fr_probereq {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	/*-- info elements ----------*/
-+	wlan_ie_ssid_t *ssid;
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_probereq_t;
-+
-+/*-- Authentication -------------------------------*/
-+typedef struct wlan_fr_authen {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *auth_alg;
-+	u16 *auth_seq;
-+	u16 *status;
-+	/*-- info elements ----------*/
-+	wlan_ie_challenge_t *challenge;
-+} wlan_fr_authen_t;
-+
-+/*-- Deauthenication -----------------------------*/
-+typedef struct wlan_fr_deauthen {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *reason;
-+	/*-- info elements ----------*/
-+} wlan_fr_deauthen_t;
-+
-+/* Types for building mgmt frames */
-+
-+/* Warning. Several types used in below structs are
-+** in fact variable length. Use structs with such fields with caution */
-+typedef struct auth_frame_body {
-+	u16	auth_alg;
-+	u16	auth_seq;
-+	u16	status;
-+	wlan_ie_challenge_t challenge;
-+} WLAN_PACKED auth_frame_body_t;
-+
-+typedef struct assocresp_frame_body {
-+	u16	cap_info;
-+	u16	status;
-+	u16	aid;
-+	wlan_ie_supp_rates_t rates;
-+} WLAN_PACKED assocresp_frame_body_t;
-+
-+typedef struct reassocreq_frame_body {
-+	u16	cap_info;
-+	u16	listen_int;
-+	u8	current_ap[ETH_ALEN];
-+	wlan_ie_ssid_t ssid;
-+/* access to this one is disabled since ssid_t is variable length: */
-+     /* wlan_ie_supp_rates_t rates; */
-+} WLAN_PACKED reassocreq_frame_body_t;
-+
-+typedef struct reassocresp_frame_body {
-+	u16	cap_info;
-+	u16	status;
-+	u16	aid;
-+	wlan_ie_supp_rates_t rates;
-+} WLAN_PACKED reassocresp_frame_body_t;
-+
-+typedef struct deauthen_frame_body {
-+	u16	reason;
-+} WLAN_PACKED deauthen_frame_body_t;
-+
-+typedef struct disassoc_frame_body {
-+	u16	reason;
-+} WLAN_PACKED disassoc_frame_body_t;
-+
-+typedef struct probereq_frame_body {
-+	wlan_ie_ssid_t ssid;
-+	wlan_ie_supp_rates_t rates;
-+} WLAN_PACKED probereq_frame_body_t;
-+
-+typedef struct proberesp_frame_body {
-+	u8	timestamp[8];
-+	u16	beacon_int;
-+	u16	cap_info;
-+	wlan_ie_ssid_t ssid;
-+/* access to these is disabled since ssid_t is variable length: */
-+     /* wlan_ie_supp_rates_t rates; */
-+     /* fhps_t	fhps; */
-+     /* dsps_t	dsps; */
-+     /* cfps_t	cfps; */
-+} WLAN_PACKED proberesp_frame_body_t;
-+
-+
-+/***********************************************************************
-+** Functions
-+*/
-+
-+/* Helpers for parsing mgmt frames */
-+void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t *f);
-+void wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t *f);
-+void wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t *f);
-+void wlan_mgmt_decode_authen(wlan_fr_authen_t *f);
-+void wlan_mgmt_decode_beacon(wlan_fr_beacon_t *f);
-+void wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t *f);
-+void wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t *f);
-+void wlan_mgmt_decode_probereq(wlan_fr_probereq_t *f);
-+void wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t *f);
-+void wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t *f);
-+void wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t *f);
-+
-+/* Helpers for building mgmt frames */
-+static inline u8*
-+wlan_fill_ie_ssid(u8 *p, int len, const char *ssid)
-+{
-+	struct wlan_ie_ssid *ie = (void*)p;
-+	ie->eid = WLAN_EID_SSID;
-+	ie->len = len;
-+	memcpy(ie->ssid, ssid, len);
-+	return p + len + 2;
-+}
-+/* This controls whether we create 802.11g 'ext supported rates' IEs
-+** or just create overlong 'supported rates' IEs instead
-+** (non-11g compliant) */
-+#define WE_OBEY_802_11G 1
-+static inline u8*
-+wlan_fill_ie_rates(u8 *p, int len, const u8 *rates)
-+{
-+	struct wlan_ie_supp_rates *ie = (void*)p;
-+#if WE_OBEY_802_11G
-+	if (len > 8 ) len = 8;
-+#endif
-+	/* supported rates (1 to 8 octets) */
-+	ie->eid = WLAN_EID_SUPP_RATES;
-+	ie->len = len;
-+	memcpy(ie->rates, rates, len);
-+	return p + len + 2;
-+}
-+/* This one wouldn't create an IE at all if not needed */
-+static inline u8*
-+wlan_fill_ie_rates_ext(u8 *p, int len, const u8 *rates)
-+{
-+	struct wlan_ie_supp_rates *ie = (void*)p;
-+#if !WE_OBEY_802_11G
-+	return p;
-+#endif
-+	len -= 8;
-+	if (len <= 0) return p;
-+	/* ext supported rates */
-+	ie->eid = WLAN_EID_EXT_RATES;
-+	ie->len = len;
-+	memcpy(ie->rates, rates+8, len);
-+	return p + len + 2;
-+}
-+static inline u8*
-+wlan_fill_ie_ds_parms(u8 *p, int channel)
-+{
-+	struct wlan_ie_ds_parms *ie = (void*)p;
-+	ie->eid = WLAN_EID_DS_PARMS;
-+	ie->len = 1;
-+	ie->curr_ch = channel;
-+	return p + sizeof(*ie);
-+}
-+static inline u8*
-+wlan_fill_ie_ibss_parms(u8 *p, int atim_win)
-+{
-+	struct wlan_ie_ibss_parms *ie = (void*)p;
-+	ie->eid = WLAN_EID_IBSS_PARMS;
-+	ie->len = 2;
-+	ie->atim_win = atim_win;
-+	return p + sizeof(*ie);
-+}
-+static inline u8*
-+wlan_fill_ie_tim(u8 *p,	int rem, int period, int bcast,
-+		int ofs, int len, const u8 *vbm)
-+{
-+	struct wlan_ie_tim *ie = (void*)p;
-+	ie->eid = WLAN_EID_TIM;
-+	ie->len = len + 3;
-+	ie->dtim_cnt = rem;
-+	ie->dtim_period = period;
-+	ie->bitmap_ctl = ofs | (bcast!=0);
-+	if (vbm)
-+		memcpy(ie->virt_bm, vbm, len); /* min 1 byte */
-+	else
-+		ie->virt_bm[0] = 0;
-+	return p + len + 3 + 2;
-+}
-Index: linux-2.6.23/drivers/net/wireless/Kconfig
-===================================================================
---- linux-2.6.23.orig/drivers/net/wireless/Kconfig	2008-01-20 21:13:17.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/Kconfig	2008-01-20 21:15:12.000000000 +0000
-@@ -5,6 +5,36 @@
- menu "Wireless LAN"
- 	depends on !S390
- 
-+config NET_RADIO
-+	bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
-+	select WIRELESS_EXT
-+	---help---
-+	  Support for wireless LANs and everything having to do with radio,
-+	  but not with amateur radio or FM broadcasting.
-+
-+	  Saying Y here also enables the Wireless Extensions (creates
-+	  /proc/net/wireless and enables iwconfig access). The Wireless
-+	  Extension is a generic API allowing a driver to expose to the user
-+	  space configuration and statistics specific to common Wireless LANs.
-+	  The beauty of it is that a single set of tool can support all the
-+	  variations of Wireless LANs, regardless of their type (as long as
-+	  the driver supports Wireless Extension). Another advantage is that
-+	  these parameters may be changed on the fly without restarting the
-+	  driver (or Linux). If you wish to use Wireless Extensions with
-+	  wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
-+	  the tools from
-+	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-+
-+config NET_WIRELESS_RTNETLINK
-+	bool "Wireless Extension API over RtNetlink"
-+	depends on NET_RADIO
-+	---help---
-+	  Support the Wireless Extension API over the RtNetlink socket
-+	  in addition to the traditional ioctl interface (selected above).
-+
-+	  For now, few tools use this facility, but it might grow in the
-+	  future. The only downside is that it adds 4.5 kB to your kernel.
-+
- config WLAN_PRE80211
- 	bool "Wireless LAN (pre-802.11)"
- 	depends on NETDEVICES
-@@ -650,6 +680,7 @@ config P54_PCI
- 
- source "drivers/net/wireless/iwlwifi/Kconfig"
- source "drivers/net/wireless/hostap/Kconfig"
-+source "drivers/net/wireless/acx/Kconfig"
- source "drivers/net/wireless/bcm43xx/Kconfig"
- source "drivers/net/wireless/b43/Kconfig"
- source "drivers/net/wireless/b43legacy/Kconfig"
-Index: linux-2.6.23/drivers/net/wireless/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/net/wireless/Makefile	2008-01-20 21:13:17.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/Makefile	2008-01-20 21:13:40.000000000 +0000
-@@ -34,6 +34,8 @@ obj-$(CONFIG_PCMCIA_ATMEL)      += atmel
- 
- obj-$(CONFIG_PRISM54)		+= prism54/
- 
-+obj-$(CONFIG_ACX)		+= acx/
-+
- obj-$(CONFIG_HOSTAP)		+= hostap/
- obj-$(CONFIG_BCM43XX)		+= bcm43xx/
- obj-$(CONFIG_B43)		+= b43/
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/htcuni.patch b/packages/kexecboot/linux-kexecboot-2.6.24/htcuni.patch
deleted file mode 100644
index 8448c4ec06..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/htcuni.patch
+++ /dev/null
@@ -1,7920 +0,0 @@
----
- arch/arm/Kconfig                                         |    2 
- arch/arm/mach-pxa/Kconfig                                |   89 +
- arch/arm/mach-pxa/Makefile                               |    1 
- arch/arm/mach-pxa/generic.c                              |   13 
- arch/arm/mach-pxa/htcuniversal/Makefile                  |   19 
- arch/arm/mach-pxa/htcuniversal/htcuniversal.c            |  468 +++++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c     |  917 +++++++++++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h     |   65 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c |  143 +
- arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c         |   61 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c         |  135 +
- arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h         |   17 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c    |   87 +
- arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c       |  226 ++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c        |  212 ++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c      |  167 ++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h      |   16 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c         |   69 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c     |   97 +
- arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c        |  490 ++++++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c        |   71 
- arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h              |   20 
- drivers/input/keyboard/Kconfig                           |    7 
- drivers/input/keyboard/Makefile                          |    1 
- drivers/input/keyboard/asic3_keys.c                      |  131 +
- drivers/leds/Kconfig                                     |    7 
- drivers/leds/Makefile                                    |    1 
- drivers/leds/leds-asic3.c                                |  189 ++
- drivers/mfd/Kconfig                                      |   10 
- drivers/mfd/Makefile                                     |    2 
- drivers/mfd/asic3_base.c                                 | 1208 +++++++++++++++
- drivers/mfd/soc-core.c                                   |  106 +
- drivers/mfd/soc-core.h                                   |   30 
- drivers/mmc/host/Kconfig                                 |    6 
- drivers/mmc/host/Makefile                                |    1 
- drivers/mmc/host/asic3_mmc.c                             |  900 +++++++++++
- drivers/mmc/host/asic3_mmc.h                             |   25 
- drivers/serial/pxa.c                                     |   22 
- include/asm-arm/arch-pxa/clock.h                         |   27 
- include/asm-arm/arch-pxa/htcuniversal-asic.h             |  213 ++
- include/asm-arm/arch-pxa/htcuniversal-gpio.h             |  220 ++
- include/asm-arm/arch-pxa/htcuniversal-init.h             |   14 
- include/asm-arm/arch-pxa/htcuniversal.h                  |    3 
- include/asm-arm/arch-pxa/irqs.h                          |    2 
- include/asm-arm/arch-pxa/pxa-pm_ll.h                     |    6 
- include/asm-arm/arch-pxa/pxa-regs.h                      |    2 
- include/asm-arm/arch-pxa/serial.h                        |   78 
- include/asm-arm/hardware/asic3_keys.h                    |   18 
- include/asm-arm/hardware/asic3_leds.h                    |   34 
- include/asm-arm/hardware/ipaq-asic3.h                    |  602 +++++++
- include/linux/backlight.h                                |    7 
- include/linux/gpiodev.h                                  |   44 
- include/linux/input_pda.h                                |   47 
- include/linux/ioport.h                                   |    1 
- include/linux/soc/asic3_base.h                           |  104 +
- include/linux/soc/tmio_mmc.h                             |   17 
- 56 files changed, 7469 insertions(+), 1 deletion(-)
-
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/Makefile
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/Makefile	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,19 @@
-+#
-+# Makefile for HTC Universal
-+#
-+
-+snd-htcuniversal-ak4641-objs := htcuniversal_ak4641.o
-+
-+obj-$(CONFIG_MACH_HTCUNIVERSAL)		+= htcuniversal.o
-+obj-$(CONFIG_HTCUNIVERSAL_CORE)		+= htcuniversal_core.o
-+obj-$(CONFIG_HTCUNIVERSAL_POWER)	+= htcuniversal_power2.o
-+obj-$(CONFIG_HTCUNIVERSAL_LCD)		+= htcuniversal_lcd.o
-+obj-$(CONFIG_HTCUNIVERSAL_BACKLIGHT)	+= htcuniversal_bl.o
-+obj-$(CONFIG_HTCUNIVERSAL_TS2)		+= htcuniversal_ts2.o
-+obj-$(CONFIG_HTCUNIVERSAL_BUTTONS) 	+= htcuniversal_buttons.o
-+obj-$(CONFIG_HTCUNIVERSAL_BLUETOOTH)	+= htcuniversal_bt.o
-+obj-$(CONFIG_HTCUNIVERSAL_PHONE)	+= htcuniversal_phone.o
-+obj-$(CONFIG_HTCUNIVERSAL_ASIC3_LEDS)	+= htcuniversal_asic3_leds.o
-+obj-$(CONFIG_HTCUNIVERSAL_UDC)		+= htcuniversal_udc.o
-+
-+obj-$(CONFIG_HTCUNIVERSAL_AK4641)	+= htcuniversal_ak4641.o
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,468 @@
-+/*
-+ * Hardware definitions for HTC Universal
-+ *
-+ * Copyright (c) 2006 Oleg Gusev
-+ *
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/input.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+
-+#include <asm/mach/irq.h>
-+#include <asm/mach/arch.h>
-+
-+#include <asm/arch/bitfield.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/serial.h>
-+#include <asm/arch/pxa27x_keyboard.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/irda.h>
-+#include <asm/arch/ohci.h>
-+
-+#include <asm/arch/htcuniversal.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-init.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+
-+#include "../generic.h"
-+
-+#include "htcuniversal_bt.h"
-+#include "htcuniversal_phone.h"
-+#include "tsc2046_ts.h"
-+
-+/*
-+ * IRDA
-+ */
-+
-+static void htcuniversal_irda_transceiver_mode(struct device *dev, int mode)
-+{
-+ /* */
-+}
-+
-+static struct pxaficp_platform_data htcuniversal_ficp_platform_data = {
-+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE,
-+	.transceiver_mode = htcuniversal_irda_transceiver_mode,
-+};
-+
-+/*
-+ * Bluetooth - Relies on other loadable modules, like ASIC3 and Core,
-+ * so make the calls indirectly through pointers. Requires that the
-+ * htcuniversal_bt module be loaded before any attempt to use
-+ * bluetooth (obviously).
-+ */
-+
-+static struct htcuniversal_bt_funcs bt_funcs;
-+
-+static void
-+htcuniversal_bt_configure( int state )
-+{
-+	if (bt_funcs.configure != NULL)
-+		bt_funcs.configure( state );
-+}
-+
-+static struct htcuniversal_phone_funcs phone_funcs;
-+
-+static void
-+htcuniversal_phone_configure( int state )
-+{
-+	if (phone_funcs.configure != NULL)
-+		phone_funcs.configure( state );
-+}
-+
-+//void htcuniversal_ll_pm_init(void);
-+
-+extern struct platform_device htcuniversal_bl;
-+static struct platform_device htcuniversal_lcd       = { .name = "htcuniversal_lcd", };
-+//static struct platform_device htcuniversal_kbd       = { .name = "htcuniversal_kbd", };
-+static struct platform_device htcuniversal_buttons   = { .name = "htcuniversal_buttons", };
-+//static struct platform_device htcuniversal_ts        = { .name = "htcuniversal_ts", };
-+//static struct platform_device htcuniversal_bt        = { .name = "htcuniversal_bt", };
-+//static struct platform_device htcuniversal_phone        = { .name = "htcuniversal_phone", };
-+static struct platform_device htcuniversal_power        = { .name = "htcuniversal_power", };
-+static struct platform_device htcuniversal_udc       = { .name = "htcuniversal_udc", };
-+
-+static struct tsc2046_mach_info htcuniversal_ts_platform_data = {
-+       .port     = 1,
-+       .clock    = CKEN_SSP1,
-+       .pwrbit_X = 1,
-+       .pwrbit_Y = 1,
-+       .irq	 = 0  /* asic3 irq */
-+};
-+
-+static struct platform_device htcuniversal_ts        = {
-+       .name = "htcuniversal_ts",
-+       .dev  = {
-+              .platform_data = &htcuniversal_ts_platform_data,
-+       },
-+};
-+
-+
-+/* Bluetooth */
-+
-+static struct platform_device htcuniversal_bt = {
-+	.name = "htcuniversal_bt",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &bt_funcs,
-+	},
-+};
-+
-+static struct platform_device htcuniversal_phone = {
-+	.name = "htcuniversal_phone",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &phone_funcs,
-+	},
-+};
-+
-+/* PXA2xx Keys */
-+
-+static struct gpio_keys_button htcuniversal_button_table[] = {
-+	{ KEY_POWER, GPIO_NR_HTCUNIVERSAL_KEY_ON_N, 1 },
-+};
-+
-+static struct gpio_keys_platform_data htcuniversal_pxa_keys_data = {
-+	.buttons = htcuniversal_button_table,
-+	.nbuttons = ARRAY_SIZE(htcuniversal_button_table),
-+};
-+
-+static struct platform_device htcuniversal_pxa_keys = {
-+	.name = "gpio-keys",
-+	.dev = {
-+		.platform_data = &htcuniversal_pxa_keys_data,
-+	},
-+	.id = -1,
-+};
-+
-+/****************************************************************
-+ * Keyboard
-+ ****************************************************************/
-+
-+static struct pxa27x_keyboard_platform_data htcuniversal_kbd = {
-+	.nr_rows = 8,
-+	.nr_cols = 8,
-+	.keycodes = {
-+		{
-+			/* row 0 */
-+			KEY_ENTER,
-+			KEY_MINUS,
-+			KEY_ESC,
-+			KEY_1,
-+			KEY_TAB,
-+			KEY_CAPSLOCK,
-+			KEY_LEFTSHIFT,
-+			KEY_RIGHTALT,	/* Fn */
-+		}, {	/* row 1 */
-+			KEY_COMMA,
-+			KEY_EQUAL,
-+			KEY_F1,
-+			KEY_2,
-+			KEY_Q,
-+			KEY_A,
-+			KEY_Z,
-+			KEY_LEFTCTRL,
-+		}, {	/* row 2 */
-+			KEY_UP,
-+			KEY_I,
-+			KEY_F2,
-+			KEY_3,
-+			KEY_W,
-+			KEY_S,
-+			KEY_X,
-+			KEY_F6,
-+		}, {	/* row 3 */
-+			KEY_DOT,
-+			KEY_O,
-+			KEY_F3,
-+			KEY_4,
-+			KEY_E,
-+			KEY_D,
-+			KEY_C,
-+			KEY_LEFTALT,
-+		}, {	/* row 4 */
-+			KEY_F9,
-+			KEY_P,
-+			KEY_F4,
-+			KEY_5,
-+			KEY_R,
-+			KEY_F,
-+			KEY_V,
-+			KEY_SPACE,
-+		}, {	/* row 5 */
-+			KEY_RIGHT,
-+			KEY_BACKSPACE,
-+			KEY_F5,
-+			KEY_6,
-+			KEY_T,
-+			KEY_G,
-+			KEY_B,
-+			KEY_F7,
-+		}, {	/* row 6 */
-+			KEY_F9,
-+			KEY_K,
-+			KEY_9,
-+			KEY_7,
-+			KEY_Y,
-+			KEY_H,
-+			KEY_N,
-+			KEY_LEFT,
-+		}, {	/* row 7 */
-+			KEY_F10,
-+			KEY_L,
-+			KEY_0,
-+			KEY_8,
-+			KEY_U,
-+			KEY_J,
-+			KEY_M,
-+			KEY_DOWN,
-+		},
-+	},
-+	.gpio_modes = {
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD,
-+	 },
-+};
-+
-+static struct platform_device htcuniversal_pxa_keyboard = {
-+        .name   = "pxa27x-keyboard",
-+        .id     = -1,
-+	.dev	=  {
-+		.platform_data	= &htcuniversal_kbd,
-+	},
-+};
-+/* Core Hardware Functions */
-+
-+struct platform_device htcuniversal_core = {
-+	.name		= "htcuniversal_core",
-+	.id		= 0,
-+	.dev = {
-+		.platform_data = NULL,
-+	},
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+	&htcuniversal_core,
-+//	&htcuniversal_flash,
-+	&htcuniversal_pxa_keyboard,
-+	&htcuniversal_pxa_keys,
-+};
-+
-+static struct platform_device *htcuniversal_asic3_devices[] __initdata = {
-+	&htcuniversal_lcd,
-+#ifdef CONFIG_HTCUNIVERSAL_BACKLIGHT
-+	&htcuniversal_bl,
-+#endif
-+	&htcuniversal_buttons,
-+	&htcuniversal_ts,
-+	&htcuniversal_bt,
-+	&htcuniversal_phone,
-+	&htcuniversal_power,
-+	&htcuniversal_udc,
-+};
-+
-+static struct asic3_platform_data htcuniversal_asic3_platform_data = {
-+
-+   /* Setting ASIC3 GPIO registers to the below initialization states
-+    * HTC Universal asic3 information:
-+    * http://wiki.xda-developers.com/index.php?pagename=UniversalASIC3
-+    * http://wiki.xda-developers.com/index.php?pagename=ASIC3
-+    *
-+    * dir:	Direction of the GPIO pin. 0: input, 1: output.
-+    *      	If unknown, set as output to avoid power consuming floating input nodes
-+    * init:	Initial state of the GPIO bits
-+    *
-+    * These registers are configured as they are on Wince.
-+    */
-+        .gpio_a = {
-+		.dir            = (1<<GPIOA_LCD_PWR5_ON)    |
-+				  (1<<GPIOA_FLASHLIGHT)     |
-+				  (1<<GPIOA_UNKNOWN9)       |
-+				  (1<<GPIOA_SPK_PWR2_ON)    |
-+				  (1<<GPIOA_UNKNOWN4)       |
-+				  (1<<GPIOA_EARPHONE_PWR_ON)|
-+				  (1<<GPIOA_AUDIO_PWR_ON)   |
-+				  (1<<GPIOA_SPK_PWR1_ON)    |
-+				  (1<<GPIOA_I2C_EN),
-+		.init           = (1<<GPIOA_LCD_PWR5_ON)    |
-+				  (1<<GPIOA_I2C_EN),
-+		.sleep_out      = 0x0000,
-+		.batt_fault_out = 0x0000,
-+		.alt_function   = 0x0000,
-+		.sleep_conf     = 0x000c,
-+        },
-+        .gpio_b = {
-+		.dir            = 0xc142,
-+		.init           = 0x8842, // TODO: 0x0900
-+		.sleep_out      = 0x0000,
-+		.batt_fault_out = 0x0000,
-+		.alt_function   = 0x0000,
-+                .sleep_conf     = 0x000c,
-+        },
-+        .gpio_c = {
-+                .dir            = 0xc7e7,
-+                .init           = 0xc6e0, // TODO: 0x8000
-+                .sleep_out      = 0x0000,
-+                .batt_fault_out = 0x0000,
-+		.alt_function   = 0x0007, // GPIOC_LED_RED | GPIOC_LED_GREEN | GPIOC_LED_BLUE
-+                .sleep_conf     = 0x000c,
-+        },
-+        .gpio_d = {
-+		.dir            = 0xffc0,
-+		.init           = 0x7840, // TODO: 0x0000
-+		.sleep_out      = 0x0000,
-+		.batt_fault_out = 0x0000,
-+		.alt_function   = 0x0000,
-+		.sleep_conf     = 0x0008,
-+        },
-+	.bus_shift = 1,
-+	.irq_base = HTCUNIVERSAL_ASIC3_IRQ_BASE,
-+
-+	.child_platform_devs     = htcuniversal_asic3_devices,
-+	.num_child_platform_devs = ARRAY_SIZE(htcuniversal_asic3_devices),
-+};
-+
-+static struct resource htcuniversal_asic3_resources[] = {
-+	[0] = {
-+		.start	= HTCUNIVERSAL_ASIC3_GPIO_PHYS,
-+		.end	= HTCUNIVERSAL_ASIC3_GPIO_PHYS + IPAQ_ASIC3_MAP_SIZE,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= HTCUNIVERSAL_IRQ(ASIC3_EXT_INT),
-+		.end	= HTCUNIVERSAL_IRQ(ASIC3_EXT_INT),
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start  = HTCUNIVERSAL_ASIC3_MMC_PHYS,
-+		.end    = HTCUNIVERSAL_ASIC3_MMC_PHYS + IPAQ_ASIC3_MAP_SIZE,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[3] = {
-+		.start  = HTCUNIVERSAL_IRQ(ASIC3_SDIO_INT_N),
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device htcuniversal_asic3 = {
-+	.name           = "asic3",
-+	.id             = 0,
-+	.num_resources  = ARRAY_SIZE(htcuniversal_asic3_resources),
-+	.resource       = htcuniversal_asic3_resources,
-+	.dev = { .platform_data = &htcuniversal_asic3_platform_data, },
-+};
-+EXPORT_SYMBOL(htcuniversal_asic3);
-+
-+static struct pxafb_mode_info htcuniversal_lcd_modes[] = {
-+{
-+	.pixclock		= 96153,
-+	.xres			= 480,
-+	.yres			= 640,
-+	.bpp			= 16,
-+	.hsync_len		= 4,
-+	.vsync_len		= 1,
-+	.left_margin		= 20,
-+	.right_margin		= 8,
-+	.upper_margin		= 7,
-+	.lower_margin		= 8,
-+
-+//	.sync			= FB_SYNC_HOR_LOW_ACT|FB_SYNC_VERT_LOW_ACT,
-+
-+},
-+};
-+
-+static struct pxafb_mach_info sony_acx526akm = {
-+        .modes		= htcuniversal_lcd_modes,
-+        .num_modes	= ARRAY_SIZE(htcuniversal_lcd_modes),
-+
-+	/* fixme: use constants defined in pxafb.h */
-+	.lccr0			= 0x00000080,
-+	.lccr3			= 0x00400000,
-+//	.lccr4			= 0x80000000,
-+};
-+
-+static void __init htcuniversal_init_irq(void)
-+{
-+	pxa27x_init_irq();
-+}
-+
-+static struct platform_pxa_serial_funcs htcuniversal_pxa_bt_funcs = {
-+	.configure = htcuniversal_bt_configure,
-+};
-+static struct platform_pxa_serial_funcs htcuniversal_pxa_phone_funcs = {
-+	.configure = htcuniversal_phone_configure,
-+};
-+
-+/* USB OHCI */
-+
-+static int htcuniversal_ohci_init(struct device *dev)
-+{
-+	/* missing GPIO setup here */
-+
-+	/* got the value from wince */
-+	UHCHR=UHCHR_CGR;
-+
-+	return 0;
-+}
-+
-+static struct pxaohci_platform_data htcuniversal_ohci_platform_data = {
-+	.port_mode = PMM_PERPORT_MODE,
-+	.init = htcuniversal_ohci_init,
-+};
-+
-+static void __init htcuniversal_map_io(void)
-+{
-+	pxa_map_io();
-+
-+	pxa_set_btuart_info(&htcuniversal_pxa_bt_funcs);
-+	pxa_set_ffuart_info(&htcuniversal_pxa_phone_funcs);
-+}
-+
-+static void __init htcuniversal_init(void)
-+{
-+	set_pxa_fb_info(&sony_acx526akm);
-+
-+	platform_device_register(&htcuniversal_asic3);
-+	platform_add_devices(devices, ARRAY_SIZE(devices) );
-+	pxa_set_ficp_info(&htcuniversal_ficp_platform_data);
-+	pxa_set_ohci_info(&htcuniversal_ohci_platform_data);
-+}
-+
-+MACHINE_START(HTCUNIVERSAL, "HTC Universal")
-+	/* Maintainer xanadux.org */
-+	.phys_io	= 0x40000000,
-+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-+	.boot_params	= 0xa0000100,
-+	.map_io		= htcuniversal_map_io,
-+	.init_irq	= htcuniversal_init_irq,
-+	.init_machine	= htcuniversal_init,
-+	.timer		= &pxa_timer,
-+MACHINE_END
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,917 @@
-+/*
-+ * Audio support for codec Asahi Kasei AK4641
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Copyright (c) 2006 Giorgio Padrin <giorgio@mandarinlogiq.org>
-+ *
-+ * History:
-+ *
-+ * 2006-03	Written -- Giorgio Padrin
-+ * 2006-09	Test and debug on machine (HP hx4700) -- Elshin Roman <roxmail@list.ru>
-+ *
-+ * AK4641 codec device driver
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * Based on code:
-+ *   Copyright (c) 2002 Hewlett-Packard Company
-+ *   Copyright (c) 2000 Nicolas Pitre <nico@cam.org>
-+ *   Copyright (c) 2000 Lernout & Hauspie Speech Products, N.V.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License.
-+ */
-+
-+#include <sound/driver.h>
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/ioctl.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+
-+#include <sound/core.h>
-+#include <sound/control.h>
-+#include <sound/initval.h>
-+#include <sound/info.h>
-+
-+#include "htcuniversal_ak4641.h"
-+
-+/* Registers */
-+#define R_PM1		0x00
-+#define R_PM2		0x01
-+#define R_SEL1		0x02
-+#define R_SEL2		0x03
-+#define	R_MODE1		0x04
-+#define R_MODE2		0x05
-+#define R_DAC		0x06
-+#define R_MIC		0x07
-+#define REG_TIMER	0x08
-+#define REG_ALC1	0x09
-+#define REG_ALC2	0x0a
-+#define R_PGA		0x0b
-+#define R_ATTL		0x0c
-+#define R_ATTR		0x0d
-+#define REG_VOL		0x0e
-+#define R_STATUS	0x0f
-+#define REG_EQLO	0x10
-+#define REG_EQMID	0x11
-+#define REG_EQHI	0x12
-+#define REG_BTIF	0x13
-+
-+/* Register flags */
-+/* REG_PWR1 */
-+#define R_PM1_PMADC	0x01
-+#define R_PM1_PMMIC	0x02
-+#define REG_PWR1_PMAUX  0x04
-+#define REG_PWR1_PMMO   0x08
-+#define R_PM1_PMLO	0x10
-+/* unused               0x20 */
-+/* unused               0x40 */
-+#define R_PM1_PMVCM	0x80
-+
-+/* REG_PWR2 */
-+#define R_PM2_PMDAC	0x01
-+/* unused               0x02 */
-+/* unused               0x04 */
-+#define R_PM2_PMMO2	0x08
-+#define REG_PWR2_MCKAC  0x10
-+/* unused               0x20 */
-+/* unused               0x40 */
-+#define R_PM2_MCKPD	0x80
-+
-+/* REG_SEL1 */
-+#define R_SEL1_PSMO2	0x01
-+/* unused               0x02 */
-+/* unused               0x04 */
-+/* unused               0x08 */
-+#define REG_SEL1_MICM   0x10
-+#define REG_SEL1_DACM   0x20
-+#define REG_SEL1_PSMO   0x40
-+#define REG_SEL1_MOGN   0x80
-+
-+/* REG_SEL2 */
-+#define R_SEL2_PSLOR	0x01
-+#define R_SEL2_PSLOL	0x02
-+#define REG_SEL2_AUXSI  0x04
-+/* unused               0x08 */
-+#define REG_SEL2_MICL   0x10
-+#define REG_SEL2_AUXL   0x20
-+/* unused               0x40 */
-+#define R_SEL2_DACL	0x80
-+
-+/* REG_MODE1 */
-+#define REG_MODE1_DIF0  0x01
-+#define REG_MODE1_DIF1  0x02
-+/* unused               0x04 */
-+/* unused               0x08 */
-+/* unused               0x10 */
-+/* unused               0x20 */
-+/* unused               0x40 */
-+/* unused               0x80 */
-+
-+/* REG_MODE2 */
-+/* unused               0x01 */
-+#define REG_MODE2_LOOP  0x02
-+#define REG_MODE2_HPM   0x04
-+/* unused               0x08 */
-+/* unused               0x10 */
-+#define REG_MODE2_MCK0  0x20
-+#define REG_MODE2_MCK1  0x40
-+/* unused               0x80 */
-+
-+/* REG_DAC */
-+#define REG_DAC_DEM0    0x01
-+#define REG_DAC_DEM1    0x02
-+#define REG_DAC_EQ      0x04
-+/* unused               0x08 */
-+#define R_DAC_DATTC	0x10
-+#define R_DAC_SMUTE	0x20
-+#define REG_DAC_TM      0x40
-+/* unused               0x80 */
-+
-+/* REG_MIC */
-+#define R_MIC_MGAIN	0x01
-+#define R_MIC_MSEL	0x02
-+#define R_MIC_MICAD	0x04
-+#define R_MIC_MPWRI	0x08
-+#define R_MIC_MPWRE	0x10
-+#define REG_MIC_AUXAD   0x20
-+/* unused               0x40 */
-+/* unused               0x80 */
-+
-+/* REG_TIMER */
-+
-+#define REG_TIMER_LTM0  0x01
-+#define REG_TIMER_LTM1  0x02
-+#define REG_TIMER_WTM0  0x04
-+#define REG_TIMER_WTM1  0x08
-+#define REG_TIMER_ZTM0  0x10
-+#define REG_TIMER_ZTM1  0x20
-+/* unused               0x40 */
-+/* unused               0x80 */
-+
-+#define REG_ALC1_LMTH   0x01
-+#define REG_ALC1_RATT   0x02
-+#define REG_ALC1_LMAT0  0x04
-+#define REG_ALC1_LMAT1  0x08
-+#define REG_ALC1_ZELM   0x10
-+#define REG_ALC1_ALC1   0x20
-+/* unused               0x40 */
-+/* unused               0x80 */
-+
-+/* REG_ALC2 */
-+
-+/* REG_PGA */
-+
-+/* REG_ATTL */
-+
-+/* REG_ATTR */
-+
-+/* REG_VOL */
-+#define REG_VOL_ATTM	0x80
-+
-+/* REG_STATUS */
-+#define R_STATUS_DTMIC	0x01
-+
-+/* REG_EQ controls use 4 bits for each of 5 EQ levels */
-+
-+/* Bluetooth not yet implemented */
-+#define REG_BTIF_PMAD2  0x01
-+#define REG_BTIF_PMDA2  0x02
-+#define REG_BTIF_PMBIF  0x04
-+#define REG_BTIF_ADC2   0x08
-+#define REG_BTIF_DAC2   0x10
-+#define REG_BTIF_BTFMT0 0x20
-+#define REG_BTIF_BTFMT1 0x40
-+/* unused               0x80 */
-+
-+/* begin {{ I2C }} */
-+
-+static struct i2c_driver snd_ak4641_i2c_driver = {
-+	.driver = {
-+		.name = "ak4641-i2c"
-+	},
-+};
-+
-+static int snd_ak4641_i2c_init(void)
-+{
-+	return i2c_add_driver(&snd_ak4641_i2c_driver);
-+}
-+
-+static void snd_ak4641_i2c_free(void)
-+{
-+	i2c_del_driver(&snd_ak4641_i2c_driver);
-+}
-+
-+static inline int snd_ak4641_i2c_probe(struct snd_ak4641 *ak)
-+{
-+	if (ak->i2c_client.adapter == NULL) return -EINVAL;
-+	ak->i2c_client.addr = 0x12;
-+	if (i2c_smbus_xfer(ak->i2c_client.adapter, ak->i2c_client.addr,
-+			   0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
-+		return -ENODEV;
-+	else return 0;
-+}
-+
-+static int snd_ak4641_i2c_attach(struct snd_ak4641 *ak)
-+{
-+	int ret = 0;
-+	if ((ret = snd_ak4641_i2c_probe(ak)) < 0) return ret;
-+	snprintf(ak->i2c_client.name, sizeof(ak->i2c_client.name),
-+		 "ak4641-i2c at %d-%04x",
-+		 i2c_adapter_id(ak->i2c_client.adapter), ak->i2c_client.addr);
-+	return i2c_attach_client(&ak->i2c_client);
-+}
-+
-+static void snd_ak4641_i2c_detach(struct snd_ak4641 *ak)
-+{
-+	i2c_detach_client(&ak->i2c_client);
-+}
-+
-+/* end {{ I2C }} */
-+
-+
-+/* begin {{ Registers & Cache Ops }} */
-+
-+static int snd_ak4641_hwsync(struct snd_ak4641 *ak, int read, u8 reg)
-+{
-+	struct i2c_msg msgs[2];
-+	u8 buf[2];
-+	int ret;
-+
-+	snd_assert(reg < ARRAY_SIZE(ak->regs), return -EINVAL);
-+
-+	/* setup i2c msgs */
-+	msgs[0].addr = ak->i2c_client.addr;
-+	msgs[0].flags = 0;
-+	msgs[0].buf = buf;
-+	if (!read)
-+		msgs[0].len = 2;
-+	else {
-+		msgs[1].flags = I2C_M_RD;
-+		msgs[1].addr = msgs[0].addr;
-+		msgs[1].buf = msgs[0].buf + 1;
-+		msgs[0].len = 1;
-+		msgs[1].len = 1;
-+	}
-+
-+	buf[0] = reg;
-+
-+	/* regs[reg] -> buffer, on write */
-+	if (!read) buf[1] = ak->regs[reg];
-+
-+	/* i2c transfer */
-+	ret = i2c_transfer(ak->i2c_client.adapter, msgs, read ? 2 : 1);
-+	if (ret != (read ? 2 : 1)) return ret; /* transfer error */ //@@ error ret < 0, or not ?
-+
-+	/* regs[reg] <- buffer, on read */
-+	if (read) ak->regs[reg] = buf[1];
-+
-+	return 0;
-+}
-+
-+static inline int snd_ak4641_hwsync_read(struct snd_ak4641 *ak, u8 reg)
-+{
-+	return snd_ak4641_hwsync(ak, 1, reg);
-+}
-+
-+static inline int snd_ak4641_hwsync_write(struct snd_ak4641 *ak, u8 reg)
-+{
-+	return snd_ak4641_hwsync(ak, 0, reg);
-+}
-+
-+static int snd_ak4641_hwsync_read_all(struct snd_ak4641 *ak)
-+{
-+	u8 reg;
-+	for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++)
-+		if (snd_ak4641_hwsync_read(ak, reg) < 0) return -1;
-+	return 0;
-+}
-+
-+static int snd_ak4641_hwsync_write_all(struct snd_ak4641 *ak)
-+{
-+	u8 reg;
-+	for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++)
-+		if (snd_ak4641_hwsync_write(ak, reg) < 0) return -1;
-+	return 0;
-+}
-+
-+static int snd_ak4641_reg_changed(struct snd_ak4641 *ak, u8 reg)
-+{
-+	if ((reg != R_PGA && ak->powered_on) ||
-+	    (reg == R_PGA && (ak->regs[R_PM1] & R_PM1_PMMIC)))
-+ 		return snd_ak4641_hwsync_write(ak, reg);
-+	return 0;
-+}
-+
-+/* end {{ Registers & Cache Ops }}*/
-+
-+
-+static inline void snd_ak4641_lock(struct snd_ak4641 *ak)
-+{
-+	down(&ak->sem);
-+}
-+
-+static inline void snd_ak4641_unlock(struct snd_ak4641 *ak)
-+{
-+	up(&ak->sem);
-+}
-+
-+#define WRITE_MASK(i, val, mask)	(((i) & ~(mask)) | ((val) & (mask)))
-+
-+
-+/* begin {{ Controls }} */
-+
-+#define INV_RANGE(val, mask) \
-+	(~(val) & (mask))
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_actl_playback_volume_info(struct snd_kcontrol *kcontrol,
-+						struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 2;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 0xff;
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_playback_volume_get(struct snd_kcontrol *kcontrol,
-+					       struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+
-+	snd_ak4641_lock(ak);
-+	ucontrol->value.integer.value[0] = INV_RANGE(ak->regs[R_ATTL], 0xff);
-+	ucontrol->value.integer.value[1] = INV_RANGE(ak->regs[R_ATTR], 0xff);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_playback_volume_put(struct snd_kcontrol *kcontrol,
-+					       struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_ATTL] = INV_RANGE(ucontrol->value.integer.value[0], 0xff);
-+	ak->regs[R_ATTR] = INV_RANGE(ucontrol->value.integer.value[1], 0xff);
-+	snd_ak4641_reg_changed(ak, R_ATTL);
-+	snd_ak4641_reg_changed(ak, R_ATTR);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_actl_mic_gain_info(struct snd_kcontrol *kcontrol,
-+					 struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 0x7f;
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_mic_gain_get(struct snd_kcontrol *kcontrol,
-+					struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+
-+	ucontrol->value.integer.value[0] = ak->regs[R_PGA];
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_mic_gain_put(struct snd_kcontrol *kcontrol,
-+					struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_PGA] = ucontrol->value.integer.value[0];
-+	snd_ak4641_reg_changed(ak, R_PGA);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+#define ACTL(ctl_name, _name) \
-+static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, \
-+  .info = snd_ak4641_actl_ ## ctl_name ## _info, \
-+  .get = snd_ak4641_actl_ ## ctl_name ## _get, .put = snd_ak4641_actl_ ## ctl_name ## _put };
-+
-+ACTL(playback_volume, "Master Playback Volume")
-+ACTL(mic_gain, "Mic Capture Gain")
-+
-+struct snd_ak4641_uctl_bool {
-+	int (*get) (struct snd_ak4641 *uda);
-+	int (*set) (struct snd_ak4641 *uda, int on);
-+};
-+
-+static int snd_ak4641_actl_bool_info(struct snd_kcontrol *kcontrol,
-+				      struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	uinfo->count = 1;
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_bool_get(struct snd_kcontrol *kcontrol,
-+				     struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+	struct snd_ak4641_uctl_bool *uctl =
-+		(struct snd_ak4641_uctl_bool *) kcontrol->private_value;
-+
-+	ucontrol->value.integer.value[0] = uctl->get(ak);
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_bool_put(struct snd_kcontrol *kcontrol,
-+				     struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+	struct snd_ak4641_uctl_bool *uctl =
-+		(struct snd_ak4641_uctl_bool *) kcontrol->private_value;
-+
-+	return uctl->set(ak, ucontrol->value.integer.value[0]);
-+}
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_uctl_playback_switch_get(struct snd_ak4641 *ak)
-+{
-+	return (ak->regs[R_DAC] & R_DAC_SMUTE) == 0x00;
-+}
-+
-+static int snd_ak4641_uctl_playback_switch_set(struct snd_ak4641 *ak, int on)
-+{
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC],
-+				     on ? 0x00 : R_DAC_SMUTE, R_DAC_SMUTE);
-+	snd_ak4641_reg_changed(ak, R_DAC);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_uctl_mic_boost_get(struct snd_ak4641 *ak)
-+{
-+	return (ak->regs[R_MIC] & R_MIC_MGAIN) == R_MIC_MGAIN;
-+}
-+
-+static int snd_ak4641_uctl_mic_boost_set(struct snd_ak4641 *ak, int on)
-+{
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC],
-+				     on ? R_MIC_MGAIN : 0x00, R_MIC_MGAIN);
-+	snd_ak4641_reg_changed(ak, R_MIC);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_uctl_mono_out_get(struct snd_ak4641 *ak)
-+{
-+        printk("mono_out status 0x%8.8x -> 0x%8.8x\n",ak->regs[R_SEL1], ak->regs[R_SEL1] & REG_SEL1_PSMO);
-+	return (ak->regs[R_SEL1] & REG_SEL1_PSMO) == REG_SEL1_PSMO;
-+}
-+
-+static int snd_ak4641_uctl_mono_out_set(struct snd_ak4641 *ak, int on)
-+{
-+        printk("phone mic enable called. on=%d\n",on);
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? R_PM1_PMMIC : 0x00, R_PM1_PMMIC);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? REG_PWR1_PMMO : 0x00, REG_PWR1_PMMO);
-+	snd_ak4641_reg_changed(ak, R_PM1);
-+
-+	snd_ak4641_hwsync_write(ak, R_PGA);	/* mic PGA gain is reset when PMMIC = 0 */
-+
-+	/* internal mic */
-+        ak->regs[R_MIC]	= WRITE_MASK(ak->regs[R_MIC], on ? R_MIC_MPWRI : 0x0, R_MIC_MPWRI);
-+        ak->regs[R_MIC]	= WRITE_MASK(ak->regs[R_MIC],                    0x0, R_MIC_MSEL);
-+        snd_ak4641_hwsync_write(ak, R_MIC);
-+
-+//        ak->regs[REG_BTIF]	= WRITE_MASK(ak->regs[REG_BTIF], 0x0, REG_BTIF_DAC2);
-+//        snd_ak4641_hwsync_write(ak, REG_BTIF);
-+	/* */
-+//	ak->regs[REG_VOL] = WRITE_MASK(ak->regs[REG_VOL], on ? REG_VOL_ATTM : 0x00, REG_VOL_ATTM);
-+//	ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MOGN : 0x00, REG_SEL1_MOGN);
-+	ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MICM : 0x00, REG_SEL1_MICM);
-+	ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_PSMO : 0x00, REG_SEL1_PSMO);
-+	snd_ak4641_reg_changed(ak, R_SEL1);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+#define ACTL_BOOL(ctl_name, _name) \
-+static struct snd_ak4641_uctl_bool snd_ak4641_actl_ ## ctl_name ## _pvalue = \
-+{ .get = snd_ak4641_uctl_ ## ctl_name ## _get, \
-+  .set = snd_ak4641_uctl_ ## ctl_name ## _set }; \
-+static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, .info = snd_ak4641_actl_bool_info, \
-+  .get = snd_ak4641_actl_bool_get, .put = snd_ak4641_actl_bool_put, \
-+  .private_value = (unsigned long) &snd_ak4641_actl_ ## ctl_name ## _pvalue };
-+
-+ACTL_BOOL(playback_switch, "Master Playback Switch")
-+ACTL_BOOL(mic_boost, "Mic Boost (+20dB)")
-+ACTL_BOOL(mono_out, "Phone mic enable")
-+
-+static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on);
-+static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on);
-+static void snd_ak4641_select_mic(struct snd_ak4641 *ak);
-+
-+void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected)
-+{
-+	snd_ak4641_lock(ak);
-+	if (connected != ak->hp_connected) {
-+		ak->hp_connected = connected;
-+
-+		/* headphone or speaker, on playback */
-+		if (ak->playback_on) {
-+			if (connected) {
-+				snd_ak4641_headphone_on(ak, 1);
-+				snd_ak4641_speaker_on(ak, 0);
-+			} else {
-+				snd_ak4641_speaker_on(ak, 1);
-+				snd_ak4641_headphone_on(ak, 0);
-+			}
-+		}
-+
-+		/* headset or internal mic, on capture */
-+		if (ak->capture_on)
-+			snd_ak4641_select_mic(ak);
-+	}
-+	snd_ak4641_unlock(ak);
-+}
-+
-+/* end {{ Controls }} */
-+
-+
-+/* begin {{ Headphone Detected Notification }} */
-+
-+static void snd_ak4641_hp_detected_w_fn(void *p)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *)p;
-+
-+	snd_ak4641_hp_connected(ak, ak->hp_detected.detected);
-+}
-+
-+void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected)
-+{
-+	if (detected != ak->hp_detected.detected) {
-+		ak->hp_detected.detected = detected;
-+		queue_work(ak->hp_detected.wq, &ak->hp_detected.w);
-+	}
-+}
-+
-+static int snd_ak4641_hp_detected_init(struct snd_ak4641 *ak)
-+{
-+	INIT_WORK(&ak->hp_detected.w, snd_ak4641_hp_detected_w_fn);
-+	ak->hp_detected.detected = ak->hp_connected;
-+	ak->hp_detected.wq = create_singlethread_workqueue("ak4641");
-+	if (ak->hp_detected.wq) return 0;
-+	else return -1;
-+}
-+
-+static void snd_ak4641_hp_detected_free(struct snd_ak4641 *ak)
-+{
-+	destroy_workqueue(ak->hp_detected.wq);
-+}
-+
-+/* end {{ Headphone Detected Notification }} */
-+
-+
-+/* begin {{ Codec Control }} */
-+
-+static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on)
-+{
-+	if (on) {
-+		ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO);
-+		snd_ak4641_hwsync_write(ak, R_PM1);
-+		ak->headphone_out_on(1);
-+		ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2],
-+					      R_SEL2_PSLOL | R_SEL2_PSLOR,
-+					      R_SEL2_PSLOL | R_SEL2_PSLOR);
-+		snd_ak4641_hwsync_write(ak, R_SEL2);
-+	} else {
-+		ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2],
-+					      0x00, R_SEL2_PSLOL | R_SEL2_PSLOR);
-+		snd_ak4641_hwsync_write(ak, R_SEL2);
-+		ak->headphone_out_on(0);
-+		ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO);
-+		snd_ak4641_hwsync_write(ak, R_PM1);
-+	}
-+}
-+
-+static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on)
-+{
-+	if (on) {
-+		ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO);
-+		snd_ak4641_hwsync_write(ak, R_PM1);
-+		ak->speaker_out_on(1);
-+		ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2],
-+					      R_SEL2_PSLOL | R_SEL2_PSLOR,
-+					      R_SEL2_PSLOL | R_SEL2_PSLOR);
-+		snd_ak4641_hwsync_write(ak, R_SEL2);
-+	} else {
-+		ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2],
-+					      0x00, R_SEL2_PSLOL | R_SEL2_PSLOR);
-+		snd_ak4641_hwsync_write(ak, R_SEL2);
-+		ak->speaker_out_on(0);
-+		ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO);
-+		snd_ak4641_hwsync_write(ak, R_PM1);
-+	}
-+}
-+
-+static inline int snd_ak4641_power_on(struct snd_ak4641 *ak)
-+{
-+	ak->reset_pin(1);
-+	ak->power_on_chip(1);
-+	msleep(1);
-+	ak->reset_pin(0);
-+	ak->powered_on = 1;
-+	return 0;
-+}
-+
-+static inline int snd_ak4641_power_off(struct snd_ak4641 *ak)
-+{
-+	ak->powered_on = 0;
-+	ak->power_on_chip(0);
-+	return 0;
-+}
-+
-+static inline void snd_ak4641_headphone_out_on(struct snd_ak4641 *ak, int on)
-+{
-+	if (ak->headphone_out_on) ak->headphone_out_on(on);
-+}
-+
-+static inline void snd_ak4641_speaker_out_on(struct snd_ak4641 *ak, int on)
-+{
-+	if (ak->speaker_out_on) ak->speaker_out_on(on);
-+}
-+
-+static int snd_ak4641_playback_on(struct snd_ak4641 *ak)
-+{
-+	if (ak->playback_on) return 0;
-+
-+	ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2],
-+				     R_PM2_PMDAC, R_PM2_MCKPD | R_PM2_PMDAC);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO);
-+	snd_ak4641_hwsync_write(ak, R_PM2);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	if (ak->hp_connected) snd_ak4641_headphone_on(ak, 1);
-+	else snd_ak4641_speaker_on(ak, 1);
-+
-+	ak->playback_on = 1;
-+
-+	return 0;
-+}
-+
-+static int snd_ak4641_playback_off(struct snd_ak4641 *ak)
-+{
-+	if (!ak->playback_on) return 0;
-+
-+	ak->playback_on = 0;
-+
-+	if (ak->hp_connected) snd_ak4641_headphone_on(ak, 0);
-+	else snd_ak4641_speaker_on(ak, 0);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO);
-+	ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2],
-+				    (!ak->capture_on ? R_PM2_MCKPD : 0x00) | R_PM2_PMDAC,
-+				    R_PM2_MCKPD | R_PM2_PMDAC);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	snd_ak4641_hwsync_write(ak, R_PM2);
-+
-+	return 0;
-+}
-+
-+static void snd_ak4641_select_mic(struct snd_ak4641 *ak)
-+{
-+	int mic = 0;
-+	u8 r_mic;
-+
-+	if (ak->hp_connected) {
-+		/* check headset mic */
-+		ak->regs[R_MIC]	= WRITE_MASK(ak->regs[R_MIC], R_MIC_MPWRE, R_MIC_MPWRE);
-+		snd_ak4641_hwsync_write(ak, R_MIC);
-+		snd_ak4641_hwsync_read(ak, R_STATUS);
-+		mic = (ak->regs[R_STATUS] & R_STATUS_DTMIC) == R_STATUS_DTMIC;
-+
-+		printk("htcuniversal_ak4641_select_mic: mic=%d\n",mic);
-+
-+	 r_mic = WRITE_MASK(ak->regs[R_MIC],
-+			   R_MIC_MSEL | (ak->capture_on ? R_MIC_MPWRE : 0x00),
-+			   R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE);
-+	}
-+	else
-+	 r_mic = WRITE_MASK(ak->regs[R_MIC],
-+			         0x00 | (ak->capture_on ? R_MIC_MPWRI : 0x00),
-+			   R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE);
-+
-+	if (r_mic != ak->regs[R_MIC]) {
-+		ak->regs[R_MIC] = r_mic;
-+		snd_ak4641_hwsync_write(ak, R_MIC);
-+	}
-+}
-+
-+static int snd_ak4641_capture_on(struct snd_ak4641 *ak)
-+{
-+	if (ak->capture_on) return 0;
-+
-+	if (!ak->playback_on) {
-+		ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], 0x00, R_PM2_MCKPD);
-+		snd_ak4641_hwsync_write(ak, R_PM2);
-+	}
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMMIC | R_PM1_PMADC,
-+						      R_PM1_PMMIC | R_PM1_PMADC);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	snd_ak4641_hwsync_write(ak, R_PGA);	/* mic PGA gain is reset when PMMIC = 0 */
-+
-+	ak->capture_on = 1;
-+
-+	snd_ak4641_select_mic(ak);
-+
-+	msleep(47);	/* accounts for ADC init cycle, time enough for fs >= 44.1 kHz */
-+
-+	return 0;
-+}
-+
-+static int snd_ak4641_capture_off(struct snd_ak4641 *ak)
-+{
-+	if (!ak->capture_on) return 0;
-+
-+	ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC],
-+				     0x00, R_MIC_MPWRI | R_MIC_MPWRE | R_MIC_MSEL);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMMIC | R_PM1_PMADC);
-+	snd_ak4641_hwsync_write(ak, R_MIC);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	if (!ak->playback_on) {
-+		ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], R_PM2_MCKPD, R_PM2_MCKPD);
-+		snd_ak4641_hwsync_write(ak, R_PM2);
-+	}
-+
-+	ak->capture_on = 0;
-+
-+	return 0;
-+}
-+
-+int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream)
-+{
-+	snd_ak4641_lock(ak);
-+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+		ak->playback_stream_opened = 1;
-+		snd_ak4641_playback_on(ak);
-+	} else {
-+		ak->capture_stream_opened = 1;
-+		snd_ak4641_capture_on(ak);
-+	}
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream)
-+{
-+	snd_ak4641_lock(ak);
-+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+		ak->playback_stream_opened = 0;
-+		snd_ak4641_playback_off(ak);
-+	} else {
-+		ak->capture_stream_opened = 0;
-+		snd_ak4641_capture_off(ak);
-+	}
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+static int snd_ak4641_init_regs(struct snd_ak4641 *ak)
-+{
-+	snd_ak4641_hwsync_read_all(ak);
-+
-+	//@@ MEMO: add some configs
-+
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMVCM, R_PM1_PMVCM);
-+	ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC], 0x00, R_DAC_DATTC);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	snd_ak4641_hwsync_write(ak, R_DAC);
-+
-+	return 0;
-+}
-+
-+int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state)
-+{
-+	snd_ak4641_lock(ak);
-+	if (ak->playback_on) snd_ak4641_playback_off(ak);
-+	if (ak->capture_on) snd_ak4641_capture_off(ak);
-+	snd_ak4641_power_off(ak);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+int snd_ak4641_resume(struct snd_ak4641 *ak)
-+{
-+	snd_ak4641_lock(ak);
-+	snd_ak4641_power_on(ak);
-+	snd_ak4641_hwsync_write_all(ak);
-+	if (ak->playback_stream_opened) snd_ak4641_playback_on(ak);
-+	if (ak->capture_stream_opened) snd_ak4641_capture_on(ak);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+static void snd_ak4641_init_ak(struct snd_ak4641 *ak)
-+{
-+	init_MUTEX(&ak->sem);
-+	ak->i2c_client.driver = &snd_ak4641_i2c_driver;
-+}
-+
-+int snd_ak4641_activate(struct snd_ak4641 *ak)
-+{
-+	int ret = 0;
-+
-+	snd_ak4641_init_ak(ak);
-+	snd_ak4641_lock(ak);
-+	snd_ak4641_power_on(ak);
-+	if ((ret = snd_ak4641_i2c_attach(ak)) < 0)
-+		goto failed_i2c_attach;
-+	snd_ak4641_init_regs(ak);
-+	if ((ret = snd_ak4641_hp_detected_init(ak)) < 0)
-+		goto failed_hp_detected_init;
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+
-+ failed_hp_detected_init:
-+	snd_ak4641_i2c_detach(ak);
-+ failed_i2c_attach:
-+	snd_ak4641_power_off(ak);
-+	snd_ak4641_unlock(ak);
-+	return ret;
-+}
-+
-+void snd_ak4641_deactivate(struct snd_ak4641 *ak)
-+{
-+	snd_ak4641_lock(ak);
-+	snd_ak4641_hp_detected_free(ak);
-+	snd_ak4641_i2c_detach(ak);
-+	snd_ak4641_power_off(ak);
-+	snd_ak4641_unlock(ak);
-+}
-+
-+int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card)
-+{
-+	snd_ak4641_lock(ak);
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_volume, ak));
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_switch, ak));
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_gain, ak));
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_boost, ak));
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mono_out, ak));
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+/* end {{ Codec Control }} */
-+
-+
-+/* begin {{ Module }} */
-+
-+static int __init snd_ak4641_module_on_load(void)
-+{
-+	snd_ak4641_i2c_init();
-+	return 0;
-+}
-+
-+static void __exit snd_ak4641_module_on_unload(void)
-+{
-+	snd_ak4641_i2c_free();
-+}
-+
-+module_init(snd_ak4641_module_on_load);
-+module_exit(snd_ak4641_module_on_unload);
-+
-+EXPORT_SYMBOL(snd_ak4641_activate);
-+EXPORT_SYMBOL(snd_ak4641_deactivate);
-+EXPORT_SYMBOL(snd_ak4641_add_mixer_controls);
-+EXPORT_SYMBOL(snd_ak4641_open_stream);
-+EXPORT_SYMBOL(snd_ak4641_close_stream);
-+EXPORT_SYMBOL(snd_ak4641_suspend);
-+EXPORT_SYMBOL(snd_ak4641_resume);
-+EXPORT_SYMBOL(snd_ak4641_hp_connected);
-+EXPORT_SYMBOL(snd_ak4641_hp_detected);
-+
-+MODULE_AUTHOR("Giorgio Padrin");
-+MODULE_DESCRIPTION("Audio support for codec Asahi Kasei AK4641");
-+MODULE_LICENSE("GPL");
-+
-+/* end {{ Module }} */
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,65 @@
-+/*
-+ * Audio support for codec Asahi Kasei AK4641
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Copyright (c) 2006 Giorgio Padrin <giorgio@mandarinlogiq.org>
-+ */
-+
-+#ifndef __SOUND_AK4641_H
-+#define __SOUND_AK4641_H
-+
-+#include <linux/i2c.h>
-+
-+struct snd_ak4641 {
-+	struct semaphore sem;
-+
-+	u8 regs[0x14];	/* registers cache */
-+
-+	unsigned int
-+		powered_on:1,
-+		playback_on:1,
-+		playback_stream_opened:1,
-+		capture_on:1,
-+		capture_stream_opened:1;
-+
-+	unsigned int
-+		hp_connected:1;
-+
-+	/* -- configuration (to fill before activation) -- */
-+	void (*power_on_chip)(int on);
-+	void (*reset_pin)(int on);
-+	void (*headphone_out_on)(int on);
-+	void (*speaker_out_on)(int on);
-+
-+	struct i2c_client i2c_client; /* to fill .adapter */
-+	/* ----------------------------------------------- */
-+
-+	struct {
-+		int detected;
-+		struct workqueue_struct *wq;
-+		struct work_struct w;
-+	} hp_detected;
-+};
-+
-+
-+/* Note: opening, closing, suspending and resuming a stream
-+ * require the clocks (MCLK and I2S ones) running
-+ */
-+
-+/* don't forget to specify I2C adapter in i2c_client field */
-+int snd_ak4641_activate(struct snd_ak4641 *ak);
-+
-+void snd_ak4641_deactivate(struct snd_ak4641 *ak);
-+int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card);
-+int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream);
-+int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream);
-+int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state);
-+int snd_ak4641_resume(struct snd_ak4641 *ak);
-+
-+void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected); /* non atomic context */
-+void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected); /* atomic context */
-+
-+#endif /* __SOUND_AK4641_H */
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,143 @@
-+/*
-+ * LEDs support for the HP iPaq hx4700
-+ *
-+ * Copyright (c) 2006  Anton Vorontsov <cbou@mail.ru>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware/asic3_leds.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+//FIXME
-+//DEFINE_LED_TRIGGER_SHARED_GLOBAL(htcuniversal_radio_trig);
-+//EXPORT_LED_TRIGGER_SHARED(htcuniversal_radio_trig);
-+
-+static struct asic3_led htcuniversal_leds[] = {
-+	{
-+		.led_cdev  = {
-+			.name	        = "htcuniversal:red",
-+			.default_trigger = "htcuniversal-charging",
-+		},
-+		.hw_num = 2,
-+
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:green",
-+			.default_trigger = "htcuniversal-chargefull",
-+		},
-+		.hw_num = 1,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:wifi-bt",
-+			.default_trigger = "htcuniversal-radio",
-+		},
-+		.hw_num = 0,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:phonebuttons",
-+			.default_trigger = "htcuniversal-phonebuttons",
-+		},
-+		.hw_num = -1,
-+		.gpio_num = ('D'-'A')*16+GPIOD_BL_KEYP_PWR_ON,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:vibra",
-+			.default_trigger = "htcuniversal-vibra",
-+		},
-+		.hw_num = -1,
-+		.gpio_num = ('D'-'A')*16+GPIOD_VIBRA_PWR_ON,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:flashlight1",
-+			.default_trigger = "htcuniversal-flashlight1",
-+		},
-+		.hw_num = -1,
-+		.gpio_num = ('A'-'A')*16+GPIOA_FLASHLIGHT,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:kbdbacklight",
-+			.default_trigger = "htcuniversal-kbdbacklight",
-+		},
-+		.hw_num = -1,
-+		.gpio_num = ('D'-'A')*16+GPIOD_BL_KEYB_PWR_ON,
-+	},
-+};
-+
-+void htcuniversal_leds_release(struct device *dev)
-+{
-+	return;
-+}
-+
-+static
-+struct asic3_leds_machinfo htcuniversal_leds_machinfo = {
-+	.num_leds = ARRAY_SIZE(htcuniversal_leds),
-+	.leds = htcuniversal_leds,
-+	.asic3_pdev = &htcuniversal_asic3,
-+};
-+
-+static
-+struct platform_device htcuniversal_leds_pdev = {
-+	.name = "asic3-leds",
-+	.dev = {
-+		.platform_data = &htcuniversal_leds_machinfo,
-+		.release = htcuniversal_leds_release,
-+	},
-+};
-+
-+static
-+int __init htcuniversal_leds_init(void)
-+{
-+	int ret;
-+	printk("htcuniversal LEDs Driver\n");
-+//	led_trigger_register_shared("htcuniversal-radio", &htcuniversal_radio_trig);
-+
-+	ret = asic3_leds_register();
-+	if (ret) goto asic3_leds_failed;
-+
-+	ret = platform_device_register(&htcuniversal_leds_pdev);
-+	if (ret) goto platform_device_failed;
-+
-+	goto success;
-+
-+platform_device_failed:
-+	asic3_leds_unregister();
-+asic3_leds_failed:
-+//	led_trigger_unregister_shared(htcuniversal_radio_trig);
-+	printk("htcuniversal LEDs Driver failed to init");
-+success:
-+	return ret;
-+}
-+
-+static
-+void __exit htcuniversal_leds_exit(void)
-+{
-+//	led_trigger_unregister_shared(htcuniversal_radio_trig);
-+	platform_device_unregister(&htcuniversal_leds_pdev);
-+	asic3_leds_unregister();
-+	return;
-+}
-+
-+module_init(htcuniversal_leds_init);
-+module_exit(htcuniversal_leds_exit);
-+
-+MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
-+MODULE_DESCRIPTION("htcuniversal LEDs driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,61 @@
-+/*
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ * Copyright (C) 2006 Paul Sokolosvky
-+ * Based on code from older versions of htcuniversal_lcd.c
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/hardware.h>  /* for pxa-regs.h (__REG) */
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/mach-types.h>     /* machine_is_htcuniversal */
-+//#include <linux/corgi_bl.h>
-+#include <linux/backlight.h>
-+#include <linux/err.h>
-+
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#define HTCUNIVERSAL_MAX_INTENSITY 0xc7
-+
-+static void htcuniversal_set_bl_intensity(int intensity)
-+{
-+	PWM_CTRL1 = 1;            /* pre-scaler */
-+	PWM_PWDUTY1 = intensity; /* duty cycle */
-+	PWM_PERVAL1 = HTCUNIVERSAL_MAX_INTENSITY+1;      /* period */
-+
-+	if (intensity > 0) {
-+		pxa_set_cken(CKEN_PWM1, 1);
-+                asic3_set_gpio_out_d(&htcuniversal_asic3.dev,
-+                        (1<<GPIOD_FL_PWR_ON), (1<<GPIOD_FL_PWR_ON));
-+	} else {
-+		pxa_set_cken(CKEN_PWM1, 0);
-+                asic3_set_gpio_out_d(&htcuniversal_asic3.dev,
-+                        (1<<GPIOD_FL_PWR_ON), 0);
-+	}
-+}
-+
-+
-+static struct generic_bl_info htcuniversal_bl_machinfo = {
-+        .default_intensity = HTCUNIVERSAL_MAX_INTENSITY / 4,
-+        .limit_mask = 0xff,
-+        .max_intensity = HTCUNIVERSAL_MAX_INTENSITY,
-+        .set_bl_intensity = htcuniversal_set_bl_intensity,
-+};
-+
-+struct platform_device htcuniversal_bl = {
-+        .name = "corgi-bl",
-+        .dev = {
-+    		.platform_data = &htcuniversal_bl_machinfo,
-+	},
-+};
-+
-+MODULE_AUTHOR("Paul Sokolovsky <pmiscml@gmail.com>");
-+MODULE_DESCRIPTION("Backlight driver for HTC Universal");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,135 @@
-+/* Bluetooth interface driver for TI BRF6150 on HX4700
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-04-21   Todd Blumer             Created.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/arch/serial.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+#include "htcuniversal_bt.h"
-+
-+static uint use_led=1;
-+
-+static void
-+htcuniversal_bt_configure( int state )
-+{
-+	int tries;
-+
-+	printk( KERN_NOTICE "htcuniversal configure bluetooth: %d\n", state );
-+	switch (state) {
-+
-+	case PXA_UART_CFG_PRE_STARTUP:
-+		break;
-+
-+	case PXA_UART_CFG_POST_STARTUP:
-+		/* pre-serial-up hardware configuration */
-+		htcuniversal_egpio_enable(1<<EGPIO5_BT_3V3_ON);
-+		mdelay(50);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_BT_PWR_ON, 1<<GPIOC_BT_PWR_ON);
-+		mdelay(10);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_BT_RESET, 0);
-+		mdelay(10);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_BT_RESET, 1<<GPIOC_BT_RESET);
-+		mdelay(10);
-+
-+		/*
-+		 * BRF6150's RTS goes low when firmware is ready
-+		 * so check for CTS=1 (nCTS=0 -> CTS=1). Typical 150ms
-+		 */
-+		tries = 0;
-+		do {
-+			mdelay(10);
-+		} while ((BTMSR & MSR_CTS) == 0 && tries++ < 50);
-+		if (use_led) {
-+//			htcuniversal_set_led(2, 16, 16);
-+		}
-+		break;
-+
-+	case PXA_UART_CFG_PRE_SHUTDOWN:
-+		htcuniversal_egpio_disable(1<<EGPIO5_BT_3V3_ON );
-+		mdelay(50);
-+//		htcuniversal_clear_led(2);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_BT_PWR_ON, 0);
-+		break;
-+
-+	default:
-+		break;
-+	}
-+}
-+
-+
-+static int
-+htcuniversal_bt_probe( struct platform_device *dev )
-+{
-+	struct htcuniversal_bt_funcs *funcs = dev->dev.platform_data;
-+
-+	/* configure bluetooth UART */
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_RXD_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_TXD_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD );
-+
-+	funcs->configure = htcuniversal_bt_configure;
-+
-+	/* Make sure the LED is off */
-+//	htcuniversal_clear_led(2);
-+
-+	return 0;
-+}
-+
-+static int
-+htcuniversal_bt_remove( struct platform_device *dev )
-+{
-+	struct htcuniversal_bt_funcs *funcs = dev->dev.platform_data;
-+
-+	funcs->configure = NULL;
-+
-+	/* Make sure the LED is off */
-+//	htcuniversal_clear_led(2);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver bt_driver = {
-+	.driver = {
-+		.name     = "htcuniversal_bt",
-+	},
-+	.probe    = htcuniversal_bt_probe,
-+	.remove   = htcuniversal_bt_remove,
-+};
-+
-+module_param(use_led, uint, 0);
-+
-+static int __init
-+htcuniversal_bt_init( void )
-+{
-+	printk(KERN_NOTICE "htcuniversal Bluetooth Driver\n");
-+	return platform_driver_register( &bt_driver );
-+}
-+
-+static void __exit
-+htcuniversal_bt_exit( void )
-+{
-+	platform_driver_unregister( &bt_driver );
-+}
-+
-+module_init( htcuniversal_bt_init );
-+module_exit( htcuniversal_bt_exit );
-+
-+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC");
-+MODULE_DESCRIPTION("HTC Universal Bluetooth Support Driver");
-+MODULE_LICENSE("GPL");
-+
-+/* vim600: set noexpandtab sw=8 ts=8 :*/
-+
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,17 @@
-+/*
-+ * Bluetooth support file for calling bluetooth configuration functions
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-06	Todd Blumer             Initial Revision
-+ */
-+
-+#ifndef _HTCUNIVERSAL_BT_H
-+#define _HTCUNIVERSAL_BT_H
-+
-+struct htcuniversal_bt_funcs {
-+	void (*configure) ( int state );
-+};
-+
-+
-+#endif
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,87 @@
-+/*
-+ * Buttons driver for HTC Universal
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.
-+ *
-+ * Copyright (C) 2005 Pawel Kolodziejski
-+ * Copyright (C) 2003 Joshua Wise
-+ *
-+ */
-+
-+#include <linux/input.h>
-+#include <linux/input_pda.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware/asic3_keys.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+static struct asic3_keys_button asic3_buttons[] = {
-+//{KEY_SCREEN,		ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N,	1, 	"screen_cover", EV_SW},
-+//{KEY_SWITCHVIDEOMODE,	ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N,		1, 	"clamshell_rotate", EV_SW},
-+//{KEY_KBDILLUMTOGGLE,	ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR,	1, 	"night_sensor", EV_SW},
-+{SW_LID,		ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N,	1, 	"screen_cover", EV_SW},
-+{SW_TABLET_MODE,	ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N,		1, 	"clamshell_rotate", EV_SW},
-+//{SW_NIGHT_SENSOR,	ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR,	1, 	"night_sensor", EV_SW},
-+{KEY_F10,		ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_BACKLIGHT_N,	1, 	"backlight_button"},
-+{KEY_RECORD,		ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_RECORD_N,	1, 	"record_button"},
-+{KEY_CAMERA,		ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_CAMERA_N,	1, 	"camera_button"},
-+{KEY_VOLUMEDOWN,	ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_UP_N,		1, 	"volume_slider_down"},
-+{KEY_VOLUMEUP,		ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_DOWN_N,		1, 	"volume_slider_up"},
-+{KEY_KPENTER,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_OK_N,		1, 	"select"},
-+{KEY_RIGHT,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_RIGHT_N,		1, 	"right"},
-+{KEY_LEFT,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_LEFT_N,		1, 	"left"},
-+{KEY_DOWN,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_DOWN_N,		1, 	"down"},
-+{KEY_UP,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_UP_N,		1, 	"up"},
-+};
-+
-+static struct asic3_keys_platform_data asic3_keys_data = {
-+        .buttons = asic3_buttons,
-+        .nbuttons = ARRAY_SIZE(asic3_buttons),
-+        .asic3_dev = &htcuniversal_asic3.dev,
-+};
-+
-+static struct platform_device htcuniversal_keys_asic3 = {
-+        .name = "asic3-keys",
-+        .dev = { .platform_data = &asic3_keys_data, }
-+};
-+
-+static int __init htcuniversal_buttons_probe(struct platform_device *dev)
-+{
-+	platform_device_register(&htcuniversal_keys_asic3);
-+	return 0;
-+}
-+
-+static struct platform_driver htcuniversal_buttons_driver = {
-+	.driver		= {
-+	    .name       = "htcuniversal_buttons",
-+	},
-+	.probe          = htcuniversal_buttons_probe,
-+};
-+
-+static int __init htcuniversal_buttons_init(void)
-+{
-+	if (!machine_is_htcuniversal())
-+		return -ENODEV;
-+
-+	return platform_driver_register(&htcuniversal_buttons_driver);
-+}
-+
-+static void __exit htcuniversal_buttons_exit(void)
-+{
-+	platform_driver_unregister(&htcuniversal_buttons_driver);
-+}
-+
-+module_init(htcuniversal_buttons_init);
-+module_exit(htcuniversal_buttons_exit);
-+
-+MODULE_AUTHOR ("Joshua Wise, Pawel Kolodziejski, Paul Sokolosvky");
-+MODULE_DESCRIPTION ("Buttons support for HTC Universal");
-+MODULE_LICENSE ("GPL");
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,226 @@
-+/* Core Hardware driver for Hx4700 (Serial, ASIC3, EGPIOs)
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-03-29   Todd Blumer             Converted  basic structure to support hx4700
-+ * 2005-04-30	Todd Blumer		Add IRDA code from H2200
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/pm.h>
-+#include <linux/irq.h>
-+
-+#include <asm/io.h>
-+#include <asm/mach/irq.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxa-pm_ll.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+#include <linux/soc/asic3_base.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+
-+volatile u_int16_t *egpios;
-+u_int16_t egpio_reg;
-+
-+static int htc_bootloader = 0;	/* Is the stock HTC bootloader installed? */
-+
-+/*
-+ * may make sense to put egpios elsewhere, but they're here now
-+ * since they share some of the same address space with the TI WLAN
-+ *
-+ * EGPIO register is write-only
-+ */
-+
-+void
-+htcuniversal_egpio_enable( u_int16_t bits )
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	egpio_reg |= bits;
-+	*egpios = egpio_reg;
-+
-+	local_irq_restore(flags);
-+}
-+EXPORT_SYMBOL_GPL(htcuniversal_egpio_enable);
-+
-+void
-+htcuniversal_egpio_disable( u_int16_t bits )
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	egpio_reg &= ~bits;
-+	*egpios = egpio_reg;
-+
-+	local_irq_restore(flags);
-+}
-+EXPORT_SYMBOL_GPL(htcuniversal_egpio_disable);
-+
-+#ifdef CONFIG_PM
-+
-+//void htcuniversal_ll_pm_init(void);
-+
-+static int htcuniversal_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	/* Turn off external clocks here, because htcuniversal_power and asic3_mmc
-+	 * scared to do so to not hurt each other. (-5 mA) */
-+
-+
-+	/* 0x20c2 is HTC clock value
-+	 * CLOCK_CDEX_SOURCE		2
-+	 * CLOCK_CDEX_SPI		0
-+	 * CLOCK_CDEX_OWM		0
-+	 *
-+	 * CLOCK_CDEX_PWM0		0
-+	 * CLOCK_CDEX_PWM1		0
-+	 * CLOCK_CDEX_LED0		1
-+	 * CLOCK_CDEX_LED1		1
-+	 *
-+	 * CLOCK_CDEX_LED2		0
-+	 * CLOCK_CDEX_SD_HOST		0
-+	 * CLOCK_CDEX_SD_BUS		0
-+	 * CLOCK_CDEX_SMBUS		0
-+	 *
-+	 * CLOCK_CDEX_CONTROL_CX	0
-+	 * CLOCK_CDEX_EX0		1
-+	 * CLOCK_CDEX_EX1		0
-+	 * */
-+	asic3_set_clock_cdex(&htcuniversal_asic3.dev, 0xffff, CLOCK_CDEX_SOURCE1
-+	                                                     |CLOCK_CDEX_LED0
-+	                                                     |CLOCK_CDEX_LED1
-+	                                                     |CLOCK_CDEX_LED2
-+	                                                     |CLOCK_CDEX_EX0
-+	                                                     |CLOCK_CDEX_EX1);
-+
-+	*egpios = 0;	/* turn off all egpio power */
-+
-+	/* Wake up enable. */
-+	PWER =    PWER_GPIO0
-+		| PWER_GPIO1 /* reset */
-+		| PWER_GPIO9 /* USB */
-+		| PWER_GPIO10 /* AC on USB */
-+		| PWER_GPIO14 /* ASIC3 mux */
-+		| PWER_RTC;
-+	/* Wake up on falling edge. */
-+	PFER =    PWER_GPIO0
-+		| PWER_GPIO1
-+		| PWER_GPIO9
-+		| PWER_GPIO10
-+		| PWER_GPIO14;
-+
-+	/* Wake up on rising edge. */
-+	PRER =    PWER_GPIO0
-+		| PWER_GPIO1
-+		| PWER_GPIO9
-+		| PWER_GPIO10;
-+	/* 3.6864 MHz oscillator power-down enable */
-+	PCFR = PCFR_OPDE | PCFR_PI2CEN | PCFR_GPROD | PCFR_GPR_EN;
-+
-+	PGSR0 = 0x09088004;
-+	PGSR1 = 0x00020002;
-+	PGSR2 = 0x8001c000;
-+	PGSR3 = 0x00106284;
-+
-+	PSLR  = 0xcc000000;
-+
-+#if 0
-+	/*
-+	 * If we're using bootldr and not the stock HTC bootloader,
-+	 * we want to wake up periodically to see if the charge is full while
-+	 * it is suspended.  We do this with the OS timer 4 in the pxa270.
-+	 */
-+	if (!htc_bootloader) {
-+		OMCR4 = 0x4b;   /* Periodic, self-resetting, 1-second timer */
-+		OSMR4 = 5;      /* Wake up bootldr after x seconds so it can
-+				   figure out what to do with the LEDs. */
-+		OIER |= 0x10;   /* Enable interrupt source for Timer 4 */
-+		OSCR4 = 0;      /* This starts the timer */
-+	}
-+#endif
-+
-+	asic3_set_extcf_select(&htcuniversal_asic3.dev, ASIC3_EXTCF_OWM_EN, 0);
-+
-+	return 0;
-+}
-+
-+static int htcuniversal_resume(struct platform_device *dev)
-+{
-+	htcuniversal_egpio_enable(0);
-+
-+	return 0;
-+}
-+#else
-+#   define htcuniversal_suspend NULL
-+#   define htcuniversal_resume NULL
-+#endif
-+
-+static int
-+htcuniversal_core_probe( struct platform_device *dev )
-+{
-+
-+	printk( KERN_NOTICE "HTC Universal Core Hardware Driver\n" );
-+
-+	egpios = (volatile u_int16_t *)ioremap_nocache(HTCUNIVERSAL_EGPIO_BASE, sizeof *egpios );
-+	if (!egpios)
-+		return -ENODEV;
-+	else
-+	 printk( KERN_NOTICE "HTC Universal Core: egpio at phy=0x%8.8x is at virt=0x%p\n",
-+	  HTCUNIVERSAL_EGPIO_BASE, egpios );
-+
-+	printk("Using stock HTC first stage bootloader\n");
-+	htc_bootloader = 1;
-+
-+//	htcuniversal_ll_pm_init();
-+
-+	return 0;
-+}
-+
-+static int
-+htcuniversal_core_remove( struct platform_device *dev )
-+{
-+
-+	if (egpios != NULL)
-+		iounmap( (void *)egpios );
-+
-+	return 0;
-+}
-+
-+static struct platform_driver htcuniversal_core_driver = {
-+	.driver = {
-+		.name     = "htcuniversal_core",
-+	},
-+	.probe    = htcuniversal_core_probe,
-+	.remove   = htcuniversal_core_remove,
-+	.suspend  = htcuniversal_suspend,
-+	.resume   = htcuniversal_resume,
-+};
-+
-+static int __init
-+htcuniversal_core_init( void )
-+{
-+	return platform_driver_register( &htcuniversal_core_driver );
-+}
-+
-+
-+static void __exit
-+htcuniversal_core_exit( void )
-+{
-+	platform_driver_unregister( &htcuniversal_core_driver );
-+}
-+
-+module_init( htcuniversal_core_init );
-+module_exit( htcuniversal_core_exit );
-+
-+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC");
-+MODULE_DESCRIPTION("HTC Universal Core Hardware Driver");
-+MODULE_LICENSE("GPL");
-+
-+/* vim600: set noexpandtab sw=8 ts=8 :*/
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,212 @@
-+/*
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ * History:
-+ *
-+ * 2004-03-01   Eddi De Pieri      Adapted for htcuniversal using h3900_lcd.c
-+ * 2004         Shawn Anderson     Lcd hacking on htcuniversal
-+ * see h3900_lcd.c for more history.
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <asm/arch/hardware.h>  /* for pxa-regs.h (__REG) */
-+#include <linux/platform_device.h>
-+#include <asm/arch/pxa-regs.h>  /* LCCR[0,1,2,3]* */
-+#include <asm/arch/bitfield.h>  /* for pxa-regs.h (Fld, etc) */
-+#include <asm/arch/pxafb.h>     /* pxafb_mach_info, set_pxa_fb_info */
-+#include <asm/mach-types.h>     /* machine_is_htcuniversal */
-+#include <linux/lcd.h>          /* lcd_device */
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+
-+static int saved_lcdpower=-1;
-+
-+static int powerup_lcd(void)
-+{
-+	printk( KERN_INFO "htcuniversal powerup_lcd: called\n");
-+
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR1_ON, 0);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR2_ON, 0);
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_LCD_PWR3_ON, 0);
-+		asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_LCD_PWR4_ON, 0);
-+		asic3_set_gpio_out_a(&htcuniversal_asic3.dev, 1<<GPIOA_LCD_PWR5_ON, 0);
-+#if 1
-+		LCCR4|=LCCR4_PCDDIV;
-+#endif
-+		pxa_set_cken(CKEN_LCD, 0);
-+
-+		mdelay(100);
-+		asic3_set_gpio_out_a(&htcuniversal_asic3.dev, 1<<GPIOA_LCD_PWR5_ON, 1<<GPIOA_LCD_PWR5_ON);
-+		mdelay(5);
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_LCD_PWR3_ON, 1<<GPIOB_LCD_PWR3_ON);
-+		mdelay(2);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR1_ON, 1<<GPIOC_LCD_PWR1_ON);
-+		mdelay(2);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR2_ON, 1<<GPIOC_LCD_PWR2_ON);
-+		mdelay(20);
-+		asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_LCD_PWR4_ON, 1<<GPIOD_LCD_PWR4_ON);
-+		mdelay(1);
-+		pxa_set_cken(CKEN_LCD, 1);
-+
-+		SET_HTCUNIVERSAL_GPIO(LCD1,1);
-+		SET_HTCUNIVERSAL_GPIO(LCD2,1);
-+ return 0;
-+}
-+
-+static int powerdown_lcd(void)
-+{
-+	printk( KERN_INFO "htcuniversal powerdown_lcd: called\n");
-+
-+#if 1
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR2_ON, 0);
-+		mdelay(100);
-+		asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_LCD_PWR4_ON, 0);
-+		mdelay(10);
-+		asic3_set_gpio_out_a(&htcuniversal_asic3.dev, 1<<GPIOA_LCD_PWR5_ON, 0);
-+		mdelay(1);
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_LCD_PWR3_ON, 0);
-+		mdelay(1);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR1_ON, 0);
-+		pxa_set_cken(CKEN_LCD, 0);
-+
-+		SET_HTCUNIVERSAL_GPIO(LCD1,0);
-+		SET_HTCUNIVERSAL_GPIO(LCD2,0);
-+#else
-+		pxa_set_cken(CKEN_LCD, 0);
-+
-+		SET_HTCUNIVERSAL_GPIO(LCD1,0);
-+		SET_HTCUNIVERSAL_GPIO(LCD2,0);
-+
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR2_ON, 0);
-+		mdelay(100);
-+		asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_LCD_PWR4_ON, 0);
-+		mdelay(10);
-+		asic3_set_gpio_out_a(&htcuniversal_asic3.dev, 1<<GPIOA_LCD_PWR5_ON, 0);
-+		mdelay(1);
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_LCD_PWR3_ON, 0);
-+		mdelay(1);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR1_ON, 0);
-+#endif
-+ return 0;
-+}
-+
-+static int htcuniversal_lcd_set_power(struct lcd_device *lm, int power)
-+{
-+	 /* Enable or disable power to the LCD (0: on; 4: off) */
-+
-+	if ( power < 1 ) {
-+
-+	powerup_lcd();
-+
-+	} else {
-+
-+	powerdown_lcd();
-+
-+	}
-+
-+	saved_lcdpower=power;
-+
-+	return 0;
-+}
-+
-+static int htcuniversal_lcd_get_power(struct lcd_device *lm)
-+{
-+	/* Get the LCD panel power status (0: full on, 1..3: controller
-+	 * power on, flat panel power off, 4: full off) */
-+
-+	if (saved_lcdpower == -1)
-+	{
-+	 htcuniversal_lcd_set_power(lm, 4);
-+	 saved_lcdpower=4;
-+	}
-+
-+ return saved_lcdpower;
-+}
-+
-+static struct lcd_ops htcuniversal_lcd_properties =
-+{
-+	.get_power      = htcuniversal_lcd_get_power,
-+	.set_power      = htcuniversal_lcd_set_power,
-+};
-+
-+static struct lcd_device *htcuniversal_lcd_dev;
-+
-+static int htcuniversal_lcd_probe(struct platform_device * dev)
-+{
-+	htcuniversal_lcd_dev = lcd_device_register("pxa2xx-fb", &dev->dev, NULL,
-+			&htcuniversal_lcd_properties);
-+	if (IS_ERR(htcuniversal_lcd_dev)) {
-+		printk("htcuniversal_lcd_probe: error registering devices\n");
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int htcuniversal_lcd_remove(struct platform_device * dev)
-+{
-+	htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4);
-+	lcd_device_unregister(htcuniversal_lcd_dev);
-+
-+	return 0;
-+}
-+
-+static int htcuniversal_lcd_suspend(struct platform_device * dev, pm_message_t state)
-+{
-+//	printk("htcuniversal_lcd_suspend: called.\n");
-+	htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4);
-+	return 0;
-+}
-+
-+static int htcuniversal_lcd_resume(struct platform_device * dev)
-+{
-+//	printk("htcuniversal_lcd_resume: called.\n");
-+
-+	/* */
-+#if 1
-+	LCCR4|=LCCR4_PCDDIV;
-+#endif
-+
-+	htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 0);
-+	return 0;
-+}
-+
-+static struct platform_driver htcuniversal_lcd_driver = {
-+	.driver = {
-+		.name     = "htcuniversal_lcd",
-+	},
-+	.probe    = htcuniversal_lcd_probe,
-+	.remove   = htcuniversal_lcd_remove,
-+	.suspend  = htcuniversal_lcd_suspend,
-+	.resume   = htcuniversal_lcd_resume,
-+};
-+
-+static int htcuniversal_lcd_init(void)
-+{
-+	if (!machine_is_htcuniversal())
-+		return -ENODEV;
-+
-+	return platform_driver_register(&htcuniversal_lcd_driver);
-+}
-+
-+static void htcuniversal_lcd_exit(void)
-+{
-+	lcd_device_unregister(htcuniversal_lcd_dev);
-+	platform_driver_unregister(&htcuniversal_lcd_driver);
-+}
-+
-+module_init(htcuniversal_lcd_init);
-+module_exit(htcuniversal_lcd_exit);
-+
-+MODULE_AUTHOR("xanadux.org");
-+MODULE_DESCRIPTION("Framebuffer driver for HTC Universal");
-+MODULE_LICENSE("GPL");
-+
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,167 @@
-+
-+/* Phone interface driver for Qualcomm MSM6250 on HTC Universal
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-04-21   Todd Blumer             Created.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/arch/serial.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+#include "htcuniversal_phone.h"
-+
-+static void phone_reset(void)
-+{
-+	asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_RESET2, 0);
-+
-+	SET_HTCUNIVERSAL_GPIO(PHONE_RESET,0);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 0);
-+	mdelay(1);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 1<<GPIOD_BB_RESET1);
-+	mdelay(20);
-+	SET_HTCUNIVERSAL_GPIO(PHONE_RESET,1);
-+	mdelay(200);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 0);
-+}
-+
-+static void phone_off(void)
-+{
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 1<<GPIOD_BB_RESET1);
-+	mdelay(2000);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 0);
-+
-+	asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_RESET2, 1<<GPIOB_BB_RESET2);
-+	SET_HTCUNIVERSAL_GPIO(PHONE_OFF,0);
-+}
-+
-+static void
-+htcuniversal_phone_configure( int state )
-+{
-+	int tries;
-+	unsigned short statusb;
-+
-+	printk( KERN_NOTICE "htcuniversal configure phone: %d\n", state );
-+	switch (state) {
-+
-+	case PXA_UART_CFG_PRE_STARTUP:
-+		break;
-+
-+	case PXA_UART_CFG_POST_STARTUP:
-+		/* pre-serial-up hardware configuration */
-+
-+		SET_HTCUNIVERSAL_GPIO(PHONE_START,0);   /* "bootloader" */
-+		SET_HTCUNIVERSAL_GPIO(PHONE_UNKNOWN,0); /* not used     */
-+		SET_HTCUNIVERSAL_GPIO(PHONE_OFF,0);     /* PHONE_OFF    */
-+
-+		phone_reset();
-+
-+		SET_HTCUNIVERSAL_GPIO(PHONE_START,1); /* phone */
-+
-+		phone_reset();
-+
-+		asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_READY, 0);
-+		asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_UNKNOWN3, 0);
-+
-+		/*
-+		 */
-+		tries = 0;
-+		do {
-+			mdelay(10);
-+			statusb = asic3_get_gpio_status_b( &htcuniversal_asic3.dev );
-+		} while ( (statusb & (1<<GPIOB_UMTS_DCD)) == 0 && tries++ < 200);
-+
-+		printk("UMTS_DCD tries=%d of 200\n",tries);
-+
-+		tries = 0;
-+		do {
-+			SET_HTCUNIVERSAL_GPIO(PHONE_OFF,1);
-+			mdelay(10);
-+			SET_HTCUNIVERSAL_GPIO(PHONE_OFF,0);
-+			mdelay(20);
-+			statusb = asic3_get_gpio_status_b( &htcuniversal_asic3.dev );
-+		} while ( (statusb & (1<<GPIOB_BB_READY)) == 0 && tries++ < 200);
-+
-+		printk("BB_READY tries=%d of 200\n",tries);
-+
-+		break;
-+
-+	case PXA_UART_CFG_PRE_SHUTDOWN:
-+
-+			phone_off();
-+
-+		break;
-+
-+	default:
-+		break;
-+	}
-+}
-+
-+
-+static int
-+htcuniversal_phone_probe( struct platform_device *dev )
-+{
-+	struct htcuniversal_phone_funcs *funcs = dev->dev.platform_data;
-+
-+	/* configure phone UART */
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD );
-+
-+	funcs->configure = htcuniversal_phone_configure;
-+
-+	return 0;
-+}
-+
-+static int
-+htcuniversal_phone_remove( struct platform_device *dev )
-+{
-+	struct htcuniversal_phone_funcs *funcs = dev->dev.platform_data;
-+
-+	funcs->configure = NULL;
-+
-+	asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_READY, 1<<GPIOB_BB_READY);
-+	asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_UNKNOWN3, 1<<GPIOB_BB_UNKNOWN3);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver phone_driver = {
-+	.driver   = {
-+		.name     = "htcuniversal_phone",
-+	},
-+	.probe    = htcuniversal_phone_probe,
-+	.remove   = htcuniversal_phone_remove,
-+};
-+
-+static int __init
-+htcuniversal_phone_init( void )
-+{
-+	printk(KERN_NOTICE "htcuniversal Phone Driver\n");
-+	return platform_driver_register( &phone_driver );
-+}
-+
-+static void __exit
-+htcuniversal_phone_exit( void )
-+{
-+	platform_driver_unregister( &phone_driver );
-+}
-+
-+module_init( htcuniversal_phone_init );
-+module_exit( htcuniversal_phone_exit );
-+
-+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC");
-+MODULE_DESCRIPTION("HTC Universal Phone Support Driver");
-+MODULE_LICENSE("GPL");
-+
-+/* vim600: set noexpandtab sw=8 ts=8 :*/
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,16 @@
-+/*
-+ * Bluetooth support file for calling bluetooth configuration functions
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-06	Todd Blumer             Initial Revision
-+ */
-+
-+#ifndef _HTCUNIVERSAL_PHONE_H
-+#define _HTCUNIVERSAL_PHONE_H
-+
-+struct htcuniversal_phone_funcs {
-+	void (*configure) ( int state );
-+};
-+
-+#endif
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,69 @@
-+/*
-+ * MyPal 716 power management support for the original HTC IPL in DoC G3
-+ *
-+ * Use consistent with the GNU GPL is permitted, provided that this
-+ * copyright notice is preserved in its entirety in all copies and
-+ * derived works.
-+ *
-+ * Copyright (C) 2005 Pawel Kolodziejski
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/pm.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxa-pm_ll.h>
-+
-+#ifdef CONFIG_PM
-+
-+static u32 *addr_a0040000;
-+static u32 *addr_a0040004;
-+static u32 *addr_a0040008;
-+static u32 *addr_a004000c;
-+
-+static u32 save_a0040000;
-+static u32 save_a0040004;
-+static u32 save_a0040008;
-+static u32 save_a004000c;
-+
-+static void htcuniversal_pxa_ll_pm_suspend(unsigned long resume_addr)
-+{
-+	save_a0040000 = *addr_a0040000;
-+	save_a0040004 = *addr_a0040004;
-+	save_a0040008 = *addr_a0040008;
-+	save_a004000c = *addr_a004000c;
-+
-+	/* jump to PSPR */
-+	*addr_a0040000 = 0xe3a00101; // mov r0, #0x40000000
-+	*addr_a0040004 = 0xe380060f; // orr r0, r0, #0x0f000000
-+	*addr_a0040008 = 0xe3800008; // orr r0, r0, #8
-+	*addr_a004000c = 0xe590f000; // ldr pc, [r0]
-+}
-+
-+static void htcuniversal_pxa_ll_pm_resume(void)
-+{
-+	*addr_a0040000 = save_a0040000;
-+	*addr_a0040004 = save_a0040004;
-+	*addr_a0040008 = save_a0040008;
-+	*addr_a004000c = save_a004000c;
-+}
-+
-+static struct pxa_ll_pm_ops htcuniversal_ll_pm_ops = {
-+	.suspend = htcuniversal_pxa_ll_pm_suspend,
-+	.resume  = htcuniversal_pxa_ll_pm_resume,
-+};
-+
-+void htcuniversal_ll_pm_init(void) {
-+	addr_a0040000 = phys_to_virt(0xa0040000);
-+	addr_a0040004 = phys_to_virt(0xa0040004);
-+	addr_a0040008 = phys_to_virt(0xa0040008);
-+	addr_a004000c = phys_to_virt(0xa004000c);
-+
-+	pxa_pm_set_ll_ops(&htcuniversal_ll_pm_ops);
-+}
-+#endif /* CONFIG_PM */
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,97 @@
-+/*
-+ * pda_power driver for HTC Universal
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or (at
-+ * your option) any later version.
-+ *
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+#include <linux/pda_power.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+static void charge_on(int flags)
-+{
-+        asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_CHARGE_EN, 0);
-+}
-+
-+static int ac_on(void)
-+{
-+ return (GET_HTCUNIVERSAL_GPIO(POWER_DET) == 0);
-+}
-+
-+static int usb_on(void)
-+{
-+ return (GET_HTCUNIVERSAL_GPIO(USB_DET) == 0);
-+}
-+
-+static char *supplicants[] = {
-+	"ds2760-battery.0", "backup-battery"
-+};
-+
-+static struct pda_power_pdata power_pdata = {
-+	.is_ac_online	= ac_on,
-+	.is_usb_online	= usb_on,
-+	.set_charge	= charge_on,
-+	.supplied_to = supplicants,
-+	.num_supplicants = ARRAY_SIZE(supplicants),
-+};
-+
-+static struct resource power_resources[] = {
-+	[0] = {
-+		.name	= "ac",
-+		.start	= HTCUNIVERSAL_IRQ(POWER_DET),
-+		.end	= HTCUNIVERSAL_IRQ(POWER_DET),
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
-+	},
-+	[1] = {
-+		.name	= "usb",
-+		.start	= HTCUNIVERSAL_IRQ(USB_DET),
-+		.end	= HTCUNIVERSAL_IRQ(USB_DET),
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
-+	},
-+};
-+
-+static void dev_release(struct device *dev)
-+{
-+	return;
-+}
-+
-+static struct platform_device power_dev =
-+{
-+	.name		= "pda-power",
-+	.id		= -1,
-+	.resource	= power_resources,
-+	.num_resources	= ARRAY_SIZE(power_resources),
-+	.dev =
-+	 {
-+		.platform_data	= &power_pdata,
-+		.release	= dev_release,
-+	 },
-+};
-+
-+static int htcuniversal_power_init(void)
-+{
-+ return platform_device_register(&power_dev);
-+}
-+
-+static void htcuniversal_power_exit(void)
-+{
-+	platform_device_unregister(&power_dev);
-+
-+	return;
-+}
-+
-+module_init(htcuniversal_power_init);
-+module_exit(htcuniversal_power_exit);
-+
-+MODULE_DESCRIPTION("Power driver for HTC Universal");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,490 @@
-+/* Touch screen driver for the TI something-or-other
-+ *
-+ * Copyright © 2005 SDG Systems, LLC
-+ *
-+ * Based on code that was based on the SAMCOP driver.
-+ *     Copyright © 2003, 2004 Compaq Computer Corporation.
-+ *
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-+ * FITNESS FOR ANY PARTICULAR PURPOSE.
-+ *
-+ * Author:  Keith Packard <keith.packard@hp.com>
-+ *          May 2003
-+ *
-+ * Updates:
-+ *
-+ * 2004-02-11   Michael Opdenacker      Renamed names from samcop to shamcop,
-+ *                                      Goal:support HAMCOP and SAMCOP.
-+ * 2004-02-14   Michael Opdenacker      Temporary fix for device id handling
-+ *
-+ * 2005-02-18   Aric Blumer             Converted  basic structure to support hx4700
-+ *
-+ * 2005-06-07   Aric Blumer             Added tssim device handling so we can
-+ *                                      hook in the fbvncserver.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/pm.h>
-+#include <linux/delay.h>
-+#include <linux/input.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/mach/irq.h>
-+#include <asm/io.h>
-+
-+/* remove me */
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+#include <asm/mach-types.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+
-+
-+#include "tsc2046_ts.h"
-+
-+enum touchscreen_state {
-+    STATE_WAIT_FOR_TOUCH,   /* Waiting for a PEN interrupt */
-+    STATE_SAMPLING          /* Actively sampling ADC */
-+};
-+
-+struct touchscreen_data {
-+    enum touchscreen_state state;
-+    struct timer_list      timer;
-+    int                    irq;
-+    struct input_dev       *input;
-+    /* */
-+    int			port;
-+    int			clock;
-+    int			pwrbit_X;
-+    int			pwrbit_Y;
-+    int			(*pen_down)(void);
-+};
-+
-+static unsigned long poll_sample_time   = 10; /* Sample every 10 milliseconds */
-+
-+static struct touchscreen_data *ts_data;
-+
-+static int irqblock;
-+
-+module_param(poll_sample_time, ulong, 0644);
-+MODULE_PARM_DESC(poll_sample_time, "Poll sample time");
-+
-+static inline void
-+report_touchpanel(struct touchscreen_data *ts, int pressure, int x, int y)
-+{
-+    input_report_abs(ts->input, ABS_PRESSURE, pressure);
-+    input_report_abs(ts->input, ABS_X, x);
-+    input_report_abs(ts->input, ABS_Y, y);
-+    input_sync(ts->input);
-+}
-+
-+static void start_read(struct touchscreen_data *touch);
-+
-+static irqreturn_t
-+pen_isr(int irq, void *irq_desc)
-+{
-+    struct touchscreen_data *ts = ts_data;
-+
-+    if(irq == ts->irq /* && !irqblock */) {
-+        irqblock = 1;
-+
-+        /*
-+         * Disable the pen interrupt.  It's reenabled when the user lifts the
-+         * pen.
-+         */
-+        disable_irq(ts->irq);
-+
-+        if (ts->state == STATE_WAIT_FOR_TOUCH) {
-+            ts->state = STATE_SAMPLING;
-+            start_read(ts);
-+        } else {
-+            /* Shouldn't happen */
-+            printk(KERN_ERR "Unexpected ts interrupt\n");
-+        }
-+
-+    }
-+    return IRQ_HANDLED;
-+}
-+
-+static void
-+ssp_init(int port, int clock)
-+{
-+
-+    pxa_set_cken(clock, 0);
-+
-+    pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD);
-+    pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD);
-+    pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD);
-+    pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD);
-+
-+    SET_HTCUNIVERSAL_GPIO(SPI_FRM,1);
-+
-+    /* *** Set up the SPI Registers *** */
-+    SSCR0_P(port) =
-+          SSCR0_EDSS         /* Extended Data Size Select */
-+        | SSCR0_SerClkDiv(7) /* Serial Clock Rate */
-+                             /* Synchronous Serial Enable (Disable for now) */
-+        | SSCR0_Motorola     /* Motorola SPI Interface */
-+        | SSCR0_DataSize(8)  /* Data Size Select  (24-bit) */
-+        ;
-+    SSCR1_P(port) = 0;
-+    SSPSP_P(port) = 0;
-+
-+    /* Clear the Status */
-+    SSSR_P(port)  = SSSR_P(port) & 0x00fcfffc;
-+
-+    /* Now enable it */
-+    SSCR0_P(port) =
-+          SSCR0_EDSS         /* Extended Data Size Select */
-+        | SSCR0_SerClkDiv(7) /* Serial Clock Rate */
-+        | SSCR0_SSE          /* Synchronous Serial Enable */
-+        | SSCR0_Motorola     /* Motorola SPI Interface */
-+        | SSCR0_DataSize(8)  /* Data Size Select  (24-bit) */
-+        ;
-+
-+    pxa_set_cken(clock, 1);
-+}
-+
-+static void
-+start_read(struct touchscreen_data *touch)
-+{
-+    unsigned long inc = (poll_sample_time * HZ) / 1000;
-+    int i;
-+
-+    /* Write here to the serial port. We request X and Y only for now.
-+     * Then we have to wait for poll_sample_time before we read out the serial
-+     * port.  Then, when we read it out, we check to see if the pen is still
-+     * down.  If so, then we issue another request here.
-+     */
-+#define TS_SAMPLES 7
-+
-+    /*
-+     * We do four samples for each, and throw out the highest and lowest, then
-+     * average the other two.
-+     */
-+
-+    for(i = 0; i < TS_SAMPLES; i++) {
-+        while(!(SSSR_P(touch->port) & SSSR_TNF))
-+            ;
-+        /* It's not full. Write the command for X */
-+        SSDR_P(touch->port) = (TSC2046_SAMPLE_X|(touch->pwrbit_X))<<16;
-+    }
-+
-+    for(i = 0; i < TS_SAMPLES; i++) {
-+        while(!(SSSR_P(touch->port) & SSSR_TNF))
-+            ;
-+        /* It's not full. Write the command for Y */
-+        SSDR_P(touch->port)  = (TSC2046_SAMPLE_Y|(touch->pwrbit_Y))<<16;
-+    }
-+
-+    /*
-+     * Enable the timer. We should get an interrupt, but we want keep a timer
-+     * to ensure that we can detect missing data
-+     */
-+    mod_timer(&touch->timer, jiffies + inc);
-+}
-+
-+static void
-+ts_timer_callback(unsigned long data)
-+{
-+    struct touchscreen_data *ts = (struct touchscreen_data *)data;
-+    int x, a[TS_SAMPLES], y;
-+    static int oldx, oldy;
-+    int ssrval;
-+
-+    /*
-+     * Check here to see if there is anything in the SPI FIFO.  If so,
-+     * return it if there has been a change.  If not, then we have a
-+     * timeout.  Generate an erro somehow.
-+     */
-+    ssrval = SSSR_P(ts->port);
-+
-+    if(ssrval & SSSR_RNE) { /* Look at Rx Not Empty bit */
-+        int number_of_entries_in_fifo;
-+
-+        /* The FIFO is not emtpy. Good! Now make sure there are at least two
-+         * entries. (Should be two exactly.) */
-+
-+        number_of_entries_in_fifo = ((ssrval >> 12) & 0xf) + 1;
-+
-+        if(number_of_entries_in_fifo < TS_SAMPLES * 2) {
-+            /* Not ready yet. Come back later. */
-+            unsigned long inc = (poll_sample_time * HZ) / 1000;
-+            mod_timer(&ts->timer, jiffies + inc);
-+            return;
-+        }
-+
-+        if(number_of_entries_in_fifo == TS_SAMPLES * 2) {
-+            int i, j;
-+
-+            for(i = 0; i < TS_SAMPLES; i++) {
-+                a[i] = SSDR_P(ts->port);
-+            }
-+            /* Sort them (bubble) */
-+            for(j = TS_SAMPLES - 1; j > 0; j--) {
-+                for(i = 0; i < j; i++) {
-+                    if(a[i] > a[i + 1]) {
-+                        int tmp;
-+                        tmp    = a[i+1];
-+                        a[i+1] = a[i];
-+                        a[i]   = tmp;
-+                    }
-+                }
-+            }
-+
-+            /* Take the average of the middle two */
-+            /* x = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */
-+            x = a[TS_SAMPLES/2];
-+
-+            for(i = 0; i < TS_SAMPLES; i++) {
-+                a[i] = SSDR_P(ts->port);
-+            }
-+            /* Sort them (bubble) */
-+            for(j = TS_SAMPLES - 1; j > 0; j--) {
-+                for(i = 0; i < j; i++) {
-+                    if(a[i] > a[i + 1]) {
-+                        int tmp;
-+                        tmp    = a[i+1];
-+                        a[i+1] = a[i];
-+                        a[i]   = tmp;
-+                    }
-+                }
-+            }
-+
-+
-+            /* Take the average of the middle two */
-+            /* y = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */
-+            y = a[TS_SAMPLES/2];
-+        } else {
-+            /* We have an error! Too many entries. */
-+            printk(KERN_ERR "TS: Expected %d entries. Got %d\n", TS_SAMPLES*2, number_of_entries_in_fifo);
-+            /* Try to clear the FIFO */
-+            while(number_of_entries_in_fifo--) {
-+                (void)SSDR_P(ts->port);
-+            }
-+
-+            if (ts->pen_down())
-+                start_read(ts);
-+
-+            return;
-+        }
-+    } else {
-+        /* Not ready yet. Come back later. */
-+        unsigned long inc = (poll_sample_time * HZ) / 1000;
-+        mod_timer(&ts->timer, jiffies + inc);
-+        return;
-+    }
-+
-+    /*
-+     * Now we check to see if the pen is still down.  If it is, then call
-+     * start_read().
-+     */
-+    if (ts->pen_down())
-+    {
-+        /* Still down */
-+        if(oldx != x || oldy != y) {
-+            oldx = x;
-+            oldy = y;
-+            report_touchpanel(ts, 1, x, y);
-+        }
-+        start_read(ts);
-+    } else {
-+        /* Up */
-+        report_touchpanel(ts, 0, 0, 0);
-+        irqblock = 0;
-+        ts->state = STATE_WAIT_FOR_TOUCH;
-+        /* Re-enable pen down interrupt */
-+        enable_irq(ts->irq);
-+    }
-+}
-+
-+static int pen_down(void)
-+{
-+ return ( asic3_get_gpio_status_a( &htcuniversal_asic3.dev ) & (1<<GPIOA_TOUCHSCREEN_N)) == 0 ;
-+}
-+
-+static int
-+ts_probe (struct platform_device *dev)
-+{
-+    int retval;
-+    struct touchscreen_data *ts;
-+    struct tsc2046_mach_info *mach = dev->dev.platform_data;
-+
-+    printk("htcuniversal: ts_probe\n");
-+
-+    ts = ts_data = kmalloc (sizeof (*ts), GFP_KERNEL);
-+    if (ts == NULL) {
-+	printk( KERN_NOTICE "htcuniversal_ts: unable to allocate memory\n" );
-+	return -ENOMEM;
-+    }
-+    memset (ts, 0, sizeof (*ts));
-+
-+    ts->input = input_allocate_device();
-+    if (ts->input == NULL) {
-+	printk( KERN_NOTICE "htcuniversal_ts: unable to allocation touchscreen input\n" );
-+	kfree(ts);
-+	return -ENOMEM;
-+    }
-+    ts->input->evbit[0]             = BIT(EV_ABS);
-+    ts->input->absbit[0]            = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
-+    ts->input->absmin[ABS_X]        = 0;
-+    ts->input->absmax[ABS_X]        = 32767;
-+    ts->input->absmin[ABS_Y]        = 0;
-+    ts->input->absmax[ABS_Y]        = 32767;
-+    ts->input->absmin[ABS_PRESSURE] = 0;
-+    ts->input->absmax[ABS_PRESSURE] = 1;
-+
-+    ts->input->name = "htcuniversal_ts";
-+    ts->input->phys =  "touchscreen/htcuniversal_ts";
-+    ts->input->private = ts;
-+
-+    input_register_device(ts->input);
-+
-+    ts->timer.function = ts_timer_callback;
-+    ts->timer.data = (unsigned long)ts;
-+    ts->state = STATE_WAIT_FOR_TOUCH;
-+    init_timer (&ts->timer);
-+
-+    platform_set_drvdata(dev, ts);
-+
-+    ts->port=-1;
-+
-+    if (mach) {
-+        ts->port = mach->port;
-+        ts->clock = mach->clock;
-+        ts->pwrbit_X = mach->pwrbit_X;
-+        ts->pwrbit_Y = mach->pwrbit_Y;
-+
-+        /* static irq */
-+        if (mach->irq)
-+         ts->irq = mach->irq;
-+
-+        if (mach->pen_down)
-+         ts->pen_down=mach->pen_down;
-+    }
-+
-+    if (ts->port == -1)
-+    {
-+     printk("tsc2046: your device is not supported by this driver\n");
-+     return -ENODEV;
-+    }
-+
-+    /* *** Initialize the SSP interface *** */
-+    ssp_init(ts->port, ts->clock);
-+
-+    while(!(SSSR_P(ts->port) & SSSR_TNF))
-+        ;
-+    SSDR_P(ts->port) = (TSC2046_SAMPLE_X|(ts->pwrbit_X))<<16;
-+
-+    for(retval = 0; retval < 100; retval++) {
-+        if(SSSR_P(ts->port) & SSSR_RNE) {
-+            while(SSSR_P(ts->port) & SSSR_RNE) {
-+                (void)SSDR_P(ts->port);
-+            }
-+            break;
-+        }
-+        mdelay(1);
-+    }
-+
-+    if (machine_is_htcuniversal() )
-+    {
-+     ts->irq = asic3_irq_base( &htcuniversal_asic3.dev ) + ASIC3_GPIOA_IRQ_BASE + GPIOA_TOUCHSCREEN_N;
-+     ts->pen_down=pen_down;
-+    }
-+
-+    retval = request_irq(ts->irq, pen_isr, IRQF_DISABLED, "tsc2046_ts", ts);
-+    if(retval) {
-+        printk("Unable to get interrupt\n");
-+        input_unregister_device (ts->input);
-+        return -ENODEV;
-+    }
-+    set_irq_type(ts->irq, IRQ_TYPE_EDGE_FALLING);
-+
-+    return 0;
-+}
-+
-+static int
-+ts_remove (struct platform_device *dev)
-+{
-+    struct touchscreen_data *ts = platform_get_drvdata(dev);
-+
-+    input_unregister_device (ts->input);
-+    del_timer_sync (&ts->timer);
-+    free_irq (ts->irq, ts);
-+    pxa_set_cken(ts->clock, 0);
-+
-+    kfree(ts);
-+    return 0;
-+}
-+
-+static int
-+ts_suspend (struct platform_device *dev, pm_message_t state)
-+{
-+    struct touchscreen_data *ts = platform_get_drvdata(dev);
-+
-+    disable_irq(ts->irq);
-+
-+    printk("htcuniversal_ts2_suspend: called.\n");
-+    return 0;
-+}
-+
-+static int
-+ts_resume (struct platform_device *dev)
-+{
-+    struct touchscreen_data *ts = platform_get_drvdata(dev);
-+
-+    ts->state = STATE_WAIT_FOR_TOUCH;
-+    ssp_init(ts->port, ts->clock);
-+    enable_irq(ts->irq);
-+
-+    printk("htcuniversal_ts2_resume: called.\n");
-+    return 0;
-+}
-+
-+static struct platform_driver ts_driver = {
-+    .probe    = ts_probe,
-+    .remove   = ts_remove,
-+    .suspend  = ts_suspend,
-+    .resume   = ts_resume,
-+    .driver = {
-+		.name = "htcuniversal_ts",
-+	},
-+};
-+
-+
-+static int
-+ts_module_init (void)
-+{
-+    printk(KERN_NOTICE "HTC Universal Touch Screen Driver\n");
-+
-+    return platform_driver_register(&ts_driver);
-+}
-+
-+static void
-+ts_module_cleanup (void)
-+{
-+    platform_driver_unregister (&ts_driver);
-+}
-+
-+module_init(ts_module_init);
-+module_exit(ts_module_cleanup);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC");
-+MODULE_DESCRIPTION("HTC Universal Touch Screen Driver");
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,71 @@
-+
-+/*
-+ *
-+ * htcuniversal_udc.c:
-+ * htcuniversal specific code for the pxa27x usb device controller.
-+ *
-+ * Use consistent with the GNU GPL is permitted.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/udc.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+static void htcuniversal_udc_command(int cmd)
-+{
-+	switch (cmd) {
-+	case PXA2XX_UDC_CMD_DISCONNECT:
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev,
-+					   1<<GPIOB_USB_PUEN, 0);
-+//		SET_HTCUNIVERSAL_GPIO(USB_PUEN,0);
-+		break;
-+	case PXA2XX_UDC_CMD_CONNECT:
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev,
-+					   1<<GPIOB_USB_PUEN,  1<<GPIOB_USB_PUEN);
-+//		SET_HTCUNIVERSAL_GPIO(USB_PUEN,1);
-+		break;
-+	default:
-+		printk("_udc_control: unknown command!\n");
-+		break;
-+	}
-+}
-+
-+static int htcuniversal_udc_is_connected(void)
-+{
-+	return (GET_HTCUNIVERSAL_GPIO(USB_DET) != 0);
-+}
-+
-+static struct pxa2xx_udc_mach_info htcuniversal_udc_info __initdata = {
-+	.udc_is_connected = htcuniversal_udc_is_connected,
-+	.udc_command      = htcuniversal_udc_command,
-+};
-+
-+static int htcuniversal_udc_probe(struct platform_device * dev)
-+{
-+	asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_USB_PUEN, 1<<GPIOB_USB_PUEN);
-+
-+	pxa_set_udc_info(&htcuniversal_udc_info);
-+	return 0;
-+}
-+
-+static struct platform_driver htcuniversal_udc_driver = {
-+	.driver	  = {
-+		.name     = "htcuniversal_udc",
-+	},
-+	.probe    = htcuniversal_udc_probe,
-+};
-+
-+static int __init htcuniversal_udc_init(void)
-+{
-+	return platform_driver_register(&htcuniversal_udc_driver);
-+}
-+
-+module_init(htcuniversal_udc_init);
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.24/arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,20 @@
-+/*
-+ * temporary TSC2046 touchscreen hack
-+ */
-+
-+#ifndef _TSC2046_TS_H
-+#define _TSC2046_TS_H
-+
-+struct tsc2046_mach_info {
-+    int port;
-+    int clock;
-+    int pwrbit_X;
-+    int pwrbit_Y;
-+    int irq;
-+    int (*pen_down)(void);
-+};
-+
-+#define TSC2046_SAMPLE_X 0xd0
-+#define TSC2046_SAMPLE_Y 0x90
-+
-+#endif
-Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig	2008-03-10 16:08:01.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/Kconfig	2008-03-10 16:09:23.000000000 +0000
-@@ -92,6 +92,14 @@
- 	bool "Sharp PXA270 models (SL-Cxx00)"
- 	select PXA27x
- 
-+config MACH_HTCUNIVERSAL
-+	bool "HTC Universal"
-+	select PXA27x
-+	help
-+	  Say Y here if you intend to run this kernel on a
-+	  HTC Universal. Currently there is only basic support
-+	  for this PDA.
-+
- endchoice
- 
- endif
-@@ -111,6 +119,86 @@
- 
- endif
- 
-+if MACH_HTCUNIVERSAL
-+
-+menu "HTC Universal support"
-+
-+config HTCUNIVERSAL_CORE
-+        tristate "HTC Universal core"
-+        depends on MACH_HTCUNIVERSAL
-+        help
-+          This selection enables HTC Universal core support.
-+
-+config HTCUNIVERSAL_UDC
-+        bool "USB Device Controller support"
-+        depends on MACH_HTCUNIVERSAL && HTC_ASIC3 && USB_PXA27X
-+        help
-+          Enables HTC Universal specific USB detection
-+
-+config HTCUNIVERSAL_POWER
-+        tristate "HTC Universal power"
-+        depends on MACH_HTCUNIVERSAL && HTC_ASIC3
-+        help
-+          This selection enables HTC Universal power monitoring
-+	            hardware support (through ASIC3).
-+
-+config HTCUNIVERSAL_BACKLIGHT
-+	bool "HTC Universal Backlight"
-+	depends on MACH_HTCUNIVERSAL && HTC_ASIC3 && BACKLIGHT_CLASS_DEVICE
-+	help
-+	  This driver provides support for changing power and brightness
-+	  on HTC Universal LCD backlight.
-+
-+config HTCUNIVERSAL_LCD
-+	tristate "HTC Universal LCD"
-+	depends on MACH_HTCUNIVERSAL && HTC_ASIC3 && LCD_CLASS_DEVICE
-+	help
-+	  This driver provides support for changing power and brightness
-+	  on HTC Universal LCD display.
-+
-+config HTCUNIVERSAL_TS2
-+	tristate "HTC Universal Touchscreen (old)"
-+	depends on MACH_HTCUNIVERSAL && HTC_ASIC3
-+	help
-+	  Enable support for the HTC Universal Touchscreen Panel.
-+
-+config HTCUNIVERSAL_BUTTONS
-+        tristate "HTC Universal buttons support"
-+        depends on MACH_HTCUNIVERSAL && HTC_ASIC3
-+
-+config HTCUNIVERSAL_BLUETOOTH
-+	tristate "HTC Universal Bluetooth"
-+	depends on MACH_HTCUNIVERSAL && HTCUNIVERSAL_CORE && HTC_ASIC3
-+	help
-+	  Enables support for the TI BRF6150 Bluetooth Module
-+	  in the HTC Universal.
-+
-+config HTCUNIVERSAL_ASIC3_LEDS
-+	tristate "HTC Universal ASIC3 LED support"
-+	select LEDS_ASIC3
-+	depends on MACH_HTCUNIVERSAL && HTCUNIVERSAL_CORE && HTC_ASIC3
-+	---help---
-+	Support for right (colors red+green+(amber)) and left (green+blue) led
-+	Off/on hook keys LED backlight
-+	Keyboard backlight
-+	Vibra
-+	Flashlight
-+
-+config HTCUNIVERSAL_PHONE
-+	tristate "HTC Universal Phone"
-+	depends on MACH_HTCUNIVERSAL && HTCUNIVERSAL_CORE && HTC_ASIC3
-+	help
-+	  Enables support for the Qualcomm MSM6520 Phone Module
-+	  in the HTC Universal.
-+
-+config HTCUNIVERSAL_AK4641
-+	depends on SND && I2C
-+	tristate "AK4641 chipset support"
-+
-+endmenu
-+
-+endif
-+
- endmenu
- 
- config MACH_POODLE
-@@ -196,4 +284,3 @@
- 	depends on (PXA25x || PXA27x) && INPUT
- 
- endif
--
-Index: linux-2.6.24/arch/arm/mach-pxa/Makefile
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile	2008-03-10 16:08:01.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/Makefile	2008-03-10 16:09:23.000000000 +0000
-@@ -23,6 +23,7 @@
- obj-$(CONFIG_MACH_TOSA)		+= tosa.o
- obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
- obj-$(CONFIG_MACH_HX2750)	+= hx2750.o hx2750_test.o
-+obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal/
- 
- ifeq ($(CONFIG_MACH_ZYLONITE),y)
-   obj-y				+= zylonite.o
-Index: linux-2.6.24/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.24.orig/drivers/leds/Kconfig	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/drivers/leds/Kconfig	2008-03-10 16:09:23.000000000 +0000
-@@ -114,6 +114,13 @@
- 	help
- 	  This option enables support for the CM-X270 LEDs.
- 
-+config LEDS_ASIC3
-+	tristate "LED Support for the HTC ASIC3 chip"
-+	depends on LEDS_CLASS && HTC_ASIC3
-+	help
-+	  This option enables support for the LEDs connected to the
-+	  HTC ASIC3 chip.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
-Index: linux-2.6.24/drivers/leds/leds-asic3.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/leds/leds-asic3.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,189 @@
-+/*
-+ * LEDs support for HTC ASIC3 devices.
-+ *
-+ * Copyright (c) 2006  Anton Vorontsov <cbou@mail.ru>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include "leds.h"
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware/asic3_leds.h>
-+
-+#ifdef DEBUG
-+#define dbg(msg, ...) printk(msg, __VA_ARGS__)
-+#else
-+#define dbg(msg, ...)
-+#endif
-+
-+static
-+void asic3_leds_set(struct led_classdev *led_cdev, enum led_brightness b)
-+{
-+	struct asic3_led *led = container_of(led_cdev, struct asic3_led,
-+	                                     led_cdev);
-+	struct asic3_leds_machinfo *machinfo = led->machinfo;
-+	struct device *asic3_dev = &machinfo->asic3_pdev->dev;
-+
-+	dbg("%s:%s %d(%d)-%s %d\n", __FILE__, __FUNCTION__, led->hw_num,
-+	    led->gpio_num, led->led_cdev.name, b);
-+
-+	if (led->hw_num == -1) {
-+		asic3_gpio_set_value(asic3_dev, led->gpio_num, b);
-+		return;
-+	}
-+
-+	if (b == LED_OFF) {
-+		asic3_set_led(asic3_dev, led->hw_num, 0, 16, 6);
-+		asic3_set_gpio_out_c(asic3_dev, led->hw_num, 0);
-+	}
-+	else {
-+		asic3_set_gpio_out_c(asic3_dev, led->hw_num, led->hw_num);
-+		#ifdef CONFIG_LEDS_TRIGGER_HWTIMER
-+		if (led_cdev->trigger && led_cdev->trigger->is_led_supported &&
-+			       (led_cdev->trigger->is_led_supported(led_cdev) &
-+			        LED_SUPPORTS_HWTIMER)) {
-+			struct hwtimer_data *td = led_cdev->trigger_data;
-+			if (!td) return;
-+			asic3_set_led(asic3_dev, led->hw_num, td->delay_on/8,
-+					   (td->delay_on + td->delay_off)/8, 6);
-+		}
-+		else
-+		#endif
-+		asic3_set_led(asic3_dev, led->hw_num, 16, 16, 6);
-+	}
-+
-+	return;
-+}
-+
-+static
-+int asic3_leds_probe(struct platform_device *pdev)
-+{
-+	struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data;
-+	struct asic3_led *leds = machinfo->leds;
-+	int ret, i = 0;
-+
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+
-+	// Turn on clocks early, for the case if trigger would enable
-+	// led immediately after led_classdev_register().
-+	asic3_set_clock_cdex(&machinfo->asic3_pdev->dev,
-+		CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2,
-+		CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2);
-+
-+	for (i = 0; i < machinfo->num_leds; i++) {
-+		leds[i].machinfo = machinfo;
-+		leds[i].led_cdev.brightness_set = asic3_leds_set;
-+		ret = led_classdev_register(&pdev->dev, &leds[i].led_cdev);
-+		if (ret) {
-+			printk(KERN_ERR "Error: can't register %s led\n",
-+			       leds[i].led_cdev.name);
-+			goto out_err;
-+		}
-+	}
-+
-+	return 0;
-+
-+out_err:
-+	while (--i >= 0) led_classdev_unregister(&leds[i].led_cdev);
-+
-+	asic3_set_clock_cdex(&machinfo->asic3_pdev->dev,
-+		CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2,
-+		0               | 0               | 0);
-+
-+	return ret;
-+}
-+
-+static
-+int asic3_leds_remove(struct platform_device *pdev)
-+{
-+	struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data;
-+	struct asic3_led *leds = machinfo->leds;
-+	int i = 0;
-+
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+
-+	for (i = 0; i < machinfo->num_leds; i++)
-+		led_classdev_unregister(&leds[i].led_cdev);
-+
-+	asic3_set_clock_cdex(&machinfo->asic3_pdev->dev,
-+		CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2,
-+		0               | 0               | 0);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static
-+int asic3_leds_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data;
-+	struct asic3_led *leds = machinfo->leds;
-+	int i = 0;
-+
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+
-+	for (i = 0; i < machinfo->num_leds; i++)
-+		led_classdev_suspend(&leds[i].led_cdev);
-+
-+	return 0;
-+}
-+
-+static
-+int asic3_leds_resume(struct platform_device *pdev)
-+{
-+	struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data;
-+	struct asic3_led *leds = machinfo->leds;
-+	int i = 0;
-+
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+
-+	for (i = 0; i < machinfo->num_leds; i++)
-+		led_classdev_resume(&leds[i].led_cdev);
-+
-+	return 0;
-+}
-+
-+#endif
-+
-+static
-+struct platform_driver asic3_leds_driver = {
-+	.probe = asic3_leds_probe,
-+	.remove = asic3_leds_remove,
-+#ifdef CONFIG_PM
-+	.suspend = asic3_leds_suspend,
-+	.resume = asic3_leds_resume,
-+#endif
-+	.driver = {
-+		.name = "asic3-leds",
-+	},
-+};
-+
-+int asic3_leds_register(void)
-+{
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+	return platform_driver_register(&asic3_leds_driver);
-+}
-+
-+void asic3_leds_unregister(void)
-+{
-+	platform_driver_unregister(&asic3_leds_driver);
-+	return;
-+}
-+
-+EXPORT_SYMBOL_GPL(asic3_leds_register);
-+EXPORT_SYMBOL_GPL(asic3_leds_unregister);
-+
-+MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
-+MODULE_DESCRIPTION("HTC ASIC3 LEDs driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.24/drivers/mfd/Kconfig
-===================================================================
---- linux-2.6.24.orig/drivers/mfd/Kconfig	2008-03-10 16:07:51.000000000 +0000
-+++ linux-2.6.24/drivers/mfd/Kconfig	2008-03-10 16:09:23.000000000 +0000
-@@ -21,6 +21,16 @@
- 	help
- 	  Support for TI TSC2101 Touchscreen and Audio Codec
- 
-+config HTC_ASIC3
-+        tristate "HTC ASIC3 (iPAQ h1900/h3900/h4000/hx4700/rx3000) support"
-+
-+config HTC_ASIC3_DS1WM
-+       bool "Support HTC ASIC3 builtin DS1WM block"
-+       help
-+           Choose Y here if you want to include support for ASIC3's builtin
-+           W1 controller. Some devices do not use it, and yet other have
-+           separate DS1WM controller. For them, choose N.
-+
- endmenu
- 
- menu "Multimedia Capabilities Port drivers"
-Index: linux-2.6.24/drivers/mfd/Makefile
-===================================================================
---- linux-2.6.24.orig/drivers/mfd/Makefile	2008-03-10 16:07:51.000000000 +0000
-+++ linux-2.6.24/drivers/mfd/Makefile	2008-03-10 16:09:23.000000000 +0000
-@@ -2,6 +2,8 @@
- # Makefile for multifunction miscellaneous devices
- #
- 
-+obj-$(CONFIG_HTC_ASIC3)         += asic3_base.o soc-core.o
-+
- obj-$(CONFIG_MFD_SM501)		+= sm501.o
- 
- obj-$(CONFIG_MCP)		+= mcp-core.o
-Index: linux-2.6.24/drivers/mfd/asic3_base.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/mfd/asic3_base.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,1208 @@
-+/*
-+ * Driver interface to HTC "ASIC3"
-+ *
-+ * Copyright 2001 Compaq Computer Corporation.
-+ * Copyright 2004-2005 Phil Blundell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-+ * FITNESS FOR ANY PARTICULAR PURPOSE.
-+ *
-+ * Author:  Andrew Christian
-+ *          <Andrew.Christian@compaq.com>
-+ *          October 2001
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/clk.h>
-+#include <linux/ds1wm.h>
-+#include <asm/arch/clock.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+#include <linux/soc/tmio_mmc.h>
-+#include "soc-core.h"
-+
-+
-+struct asic3_data {
-+	void *mapping;
-+	unsigned int bus_shift;
-+	int irq_base;
-+	int irq_nr;
-+
-+	u16 irq_bothedge[4];
-+	struct device *dev;
-+
-+	struct platform_device *mmc_dev;
-+};
-+
-+static DEFINE_SPINLOCK(asic3_gpio_lock);
-+
-+static int asic3_remove(struct platform_device *dev);
-+
-+static inline unsigned long asic3_address(struct device *dev,
-+					  unsigned int reg)
-+{
-+	struct asic3_data *adata;
-+
-+	adata = (struct asic3_data *)dev->driver_data;
-+
-+	return (unsigned long)adata->mapping + (reg >> (2 - adata->bus_shift));
-+}
-+
-+void asic3_write_register(struct device *dev, unsigned int reg, u32 value)
-+{
-+	__raw_writew(value, asic3_address(dev, reg));
-+}
-+EXPORT_SYMBOL(asic3_write_register);
-+
-+u32 asic3_read_register(struct device *dev, unsigned int reg)
-+{
-+	return __raw_readw(asic3_address(dev, reg));
-+}
-+EXPORT_SYMBOL(asic3_read_register);
-+
-+static inline void __asic3_write_register(struct asic3_data *asic,
-+					  unsigned int reg, u32 value)
-+{
-+	__raw_writew(value, (unsigned long)asic->mapping
-+			    + (reg >> (2 - asic->bus_shift)));
-+}
-+
-+static inline u32 __asic3_read_register(struct asic3_data *asic,
-+					unsigned int reg)
-+{
-+	return __raw_readw((unsigned long)asic->mapping
-+			   + (reg >> (2 - asic->bus_shift)));
-+}
-+
-+#define ASIC3_GPIO_FN(get_fn_name, set_fn_name, REG)			\
-+u32 get_fn_name(struct device *dev)					\
-+{                                                                       \
-+	return asic3_read_register(dev, REG);				\
-+}                                                                       \
-+EXPORT_SYMBOL(get_fn_name);						\
-+									\
-+void set_fn_name(struct device *dev, u32 bits, u32 val)			\
-+{                                                                       \
-+	unsigned long flags;						\
-+									\
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);			\
-+	val |= (asic3_read_register(dev, REG) & ~bits);			\
-+	asic3_write_register(dev, REG, val);				\
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);		\
-+}                                                                       \
-+EXPORT_SYMBOL(set_fn_name);
-+
-+#define ASIC3_GPIO_REGISTER(ACTION, action, fn, FN)			\
-+	ASIC3_GPIO_FN(asic3_get_gpio_ ## action ## _ ## fn ,		\
-+		       asic3_set_gpio_ ## action ## _ ## fn ,		\
-+		       _IPAQ_ASIC3_GPIO_ ## FN ## _Base 		\
-+		       + _IPAQ_ASIC3_GPIO_ ## ACTION )
-+
-+#define ASIC3_GPIO_FUNCTIONS(fn, FN)					\
-+	ASIC3_GPIO_REGISTER(Direction, dir, fn, FN)			\
-+	ASIC3_GPIO_REGISTER(Out, out, fn, FN)				\
-+	ASIC3_GPIO_REGISTER(SleepMask, sleepmask, fn, FN)		\
-+	ASIC3_GPIO_REGISTER(SleepOut, sleepout, fn, FN)		\
-+	ASIC3_GPIO_REGISTER(BattFaultOut, battfaultout, fn, FN)	\
-+	ASIC3_GPIO_REGISTER(AltFunction, alt_fn, fn, FN)		\
-+	ASIC3_GPIO_REGISTER(SleepConf, sleepconf, fn, FN)		\
-+	ASIC3_GPIO_REGISTER(Status, status, fn, FN)
-+
-+#if 0
-+	ASIC3_GPIO_REGISTER(Mask, mask, fn, FN)
-+	ASIC3_GPIO_REGISTER(TriggerType, trigtype, fn, FN)
-+	ASIC3_GPIO_REGISTER(EdgeTrigger, rising, fn, FN)
-+	ASIC3_GPIO_REGISTER(LevelTrigger, triglevel, fn, FN)
-+	ASIC3_GPIO_REGISTER(IntStatus, intstatus, fn, FN)
-+#endif
-+
-+ASIC3_GPIO_FUNCTIONS(a, A)
-+ASIC3_GPIO_FUNCTIONS(b, B)
-+ASIC3_GPIO_FUNCTIONS(c, C)
-+ASIC3_GPIO_FUNCTIONS(d, D)
-+
-+int asic3_gpio_get_value(struct device *dev, unsigned gpio)
-+{
-+	u32 mask = ASIC3_GPIO_bit(gpio);
-+	printk("%s(%d)\n", __FUNCTION__, gpio);
-+	switch (gpio >> 4) {
-+	case _IPAQ_ASIC3_GPIO_BANK_A:
-+		return asic3_get_gpio_status_a(dev) & mask;
-+	case _IPAQ_ASIC3_GPIO_BANK_B:
-+		return asic3_get_gpio_status_b(dev) & mask;
-+	case _IPAQ_ASIC3_GPIO_BANK_C:
-+		return asic3_get_gpio_status_c(dev) & mask;
-+	case _IPAQ_ASIC3_GPIO_BANK_D:
-+		return asic3_get_gpio_status_d(dev) & mask;
-+	}
-+
-+	printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio);
-+	return 0;
-+}
-+EXPORT_SYMBOL(asic3_gpio_get_value);
-+
-+void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val)
-+{
-+	u32 mask = ASIC3_GPIO_bit(gpio);
-+	u32 bitval = 0;
-+	if (val)  bitval = mask;
-+	printk("%s(%d, %d)\n", __FUNCTION__, gpio, val);
-+
-+	switch (gpio >> 4) {
-+	case _IPAQ_ASIC3_GPIO_BANK_A:
-+		asic3_set_gpio_out_a(dev, mask, bitval);
-+		return;
-+	case _IPAQ_ASIC3_GPIO_BANK_B:
-+		asic3_set_gpio_out_b(dev, mask, bitval);
-+		return;
-+	case _IPAQ_ASIC3_GPIO_BANK_C:
-+		asic3_set_gpio_out_c(dev, mask, bitval);
-+		return;
-+	case _IPAQ_ASIC3_GPIO_BANK_D:
-+		asic3_set_gpio_out_d(dev, mask, bitval);
-+		return;
-+	}
-+
-+	printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio);
-+}
-+EXPORT_SYMBOL(asic3_gpio_set_value);
-+
-+int asic3_irq_base(struct device *dev)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+
-+	return asic->irq_base;
-+}
-+EXPORT_SYMBOL(asic3_irq_base);
-+
-+static int asic3_gpio_to_irq(struct device *dev, unsigned gpio)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	printk("%s(%d)\n", __FUNCTION__, gpio);
-+
-+	return asic->irq_base + gpio;
-+}
-+
-+void asic3_set_led(struct device *dev, int led_num, int duty_time,
-+		   int cycle_time, int timebase)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned int led_base;
-+
-+	/* it's a macro thing: see #define _IPAQ_ASIC_LED_0_Base for why you
-+	 * can't substitute led_num in the macros below...
-+	 */
-+
-+	switch (led_num) {
-+	case 0:
-+		led_base = _IPAQ_ASIC3_LED_0_Base;
-+		break;
-+	case 1:
-+		led_base = _IPAQ_ASIC3_LED_1_Base;
-+		break;
-+	case 2:
-+		led_base = _IPAQ_ASIC3_LED_2_Base;
-+		break;
-+	default:
-+		printk(KERN_ERR "%s: invalid led number %d", __FUNCTION__,
-+		       led_num);
-+		return;
-+	}
-+
-+	__asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_TimeBase,
-+			       timebase | LED_EN);
-+	__asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_PeriodTime,
-+			       cycle_time);
-+	__asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime,
-+			       0);
-+	udelay(20);     /* asic voodoo - possibly need a whole duty cycle? */
-+	__asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime,
-+			       duty_time);
-+}
-+EXPORT_SYMBOL(asic3_set_led);
-+
-+void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_clock_sel);
-+
-+void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_clock_cdex);
-+
-+static void asic3_clock_cdex_enable(struct clk *clk)
-+{
-+	struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit;
-+	unsigned long flags, val;
-+
-+	local_irq_save(flags);
-+
-+	val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX));
-+	val |= clk->ctrlbit;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val);
-+
-+	local_irq_restore(flags);
-+}
-+
-+static void asic3_clock_cdex_disable(struct clk *clk)
-+{
-+	struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit;
-+	unsigned long flags, val;
-+
-+	local_irq_save(flags);
-+
-+	val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX));
-+	val &= ~clk->ctrlbit;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val);
-+
-+	local_irq_restore(flags);
-+}
-+
-+/* base clocks */
-+
-+static struct clk clk_g = {
-+	.name		= "gclk",
-+	.rate		= 0,
-+	.parent		= NULL,
-+};
-+
-+/* clock definitions */
-+
-+static struct clk asic3_clocks[] = {
-+	{
-+		.name    = "spi",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_SPI,
-+	},
-+#ifdef CONFIG_HTC_ASIC3_DS1WM
-+	{
-+		.name    = "ds1wm",
-+		.id      = -1,
-+		.rate	 = 5000000,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_OWM,
-+	},
-+#endif
-+	{
-+		.name    = "pwm0",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_PWM0,
-+	},
-+	{
-+		.name    = "pwm1",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_PWM1,
-+	},
-+	{
-+		.name    = "led0",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_LED0,
-+	},
-+	{
-+		.name    = "led1",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_LED1,
-+	},
-+	{
-+		.name    = "led2",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_LED2,
-+	},
-+	{
-+		.name    = "smbus",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_SMBUS,
-+	},
-+	{
-+		.name    = "ex0",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_EX0,
-+	},
-+	{
-+		.name    = "ex1",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_EX1,
-+	},
-+};
-+
-+void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_extcf_select);
-+
-+void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_extcf_reset);
-+
-+void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave (&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_sdhwctrl);
-+
-+
-+#define MAX_ASIC_ISR_LOOPS    20
-+#define _IPAQ_ASIC3_GPIO_Base_INCR \
-+	(_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base)
-+
-+static inline void asic3_irq_flip_edge(struct asic3_data *asic,
-+				       u32 base, int bit)
-+{
-+	u16 edge = __asic3_read_register(asic,
-+		base + _IPAQ_ASIC3_GPIO_EdgeTrigger);
-+	edge ^= bit;
-+	__asic3_write_register(asic,
-+		base + _IPAQ_ASIC3_GPIO_EdgeTrigger, edge);
-+}
-+
-+static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
-+{
-+	int iter;
-+	struct asic3_data *asic;
-+
-+	/* Acknowledge the parrent (i.e. CPU's) IRQ */
-+	desc->chip->ack(irq);
-+
-+	asic = desc->handler_data;
-+
-+	/* printk( KERN_NOTICE "asic3_irq_demux: irq=%d\n", irq ); */
-+	for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
-+		u32 status;
-+		int bank;
-+
-+		status = __asic3_read_register(asic,
-+			IPAQ_ASIC3_OFFSET(INTR, PIntStat));
-+		/* Check all ten register bits */
-+		if ((status & 0x3ff) == 0)
-+			break;
-+
-+		/* Handle GPIO IRQs */
-+		for (bank = 0; bank < 4; bank++) {
-+			if (status & (1 << bank)) {
-+				unsigned long base, i, istat;
-+
-+				base = _IPAQ_ASIC3_GPIO_A_Base
-+				       + bank * _IPAQ_ASIC3_GPIO_Base_INCR;
-+				istat = __asic3_read_register(asic,
-+					base + _IPAQ_ASIC3_GPIO_IntStatus);
-+				/* IntStatus is write 0 to clear */
-+				/* XXX could miss interrupts! */
-+				__asic3_write_register(asic,
-+					base + _IPAQ_ASIC3_GPIO_IntStatus, 0);
-+
-+				for (i = 0; i < 16; i++) {
-+					int bit = (1 << i);
-+					unsigned int irqnr;
-+					if (!(istat & bit))
-+						continue;
-+
-+					irqnr = asic->irq_base
-+						+ (16 * bank) + i;
-+					desc = irq_desc + irqnr;
-+					desc->handle_irq(irqnr, desc);
-+					if (asic->irq_bothedge[bank] & bit) {
-+						asic3_irq_flip_edge(asic, base,
-+								    bit);
-+					}
-+				}
-+			}
-+		}
-+
-+		/* Handle remaining IRQs in the status register */
-+		{
-+			int i;
-+
-+			for (i = ASIC3_LED0_IRQ; i <= ASIC3_OWM_IRQ; i++) {
-+				/* They start at bit 4 and go up */
-+				if (status & (1 << (i - ASIC3_LED0_IRQ + 4))) {
-+					desc = irq_desc + asic->irq_base + i;
-+					desc->handle_irq(asic->irq_base + i,
-+							 desc);
-+				}
-+			}
-+		}
-+
-+	}
-+
-+	if (iter >= MAX_ASIC_ISR_LOOPS)
-+		printk(KERN_ERR "%s: interrupt processing overrun\n",
-+		       __FUNCTION__);
-+}
-+
-+static inline int asic3_irq_to_bank(struct asic3_data *asic, int irq)
-+{
-+	int n;
-+
-+	n = (irq - asic->irq_base) >> 4;
-+
-+	return (n * (_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base));
-+}
-+
-+static inline int asic3_irq_to_index(struct asic3_data *asic, int irq)
-+{
-+	return (irq - asic->irq_base) & 15;
-+}
-+
-+static void asic3_mask_gpio_irq(unsigned int irq)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	u32 val, bank, index;
-+	unsigned long flags;
-+
-+	bank = asic3_irq_to_bank(asic, irq);
-+	index = asic3_irq_to_index(asic, irq);
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask);
-+	val |= 1 << index;
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+
-+static void asic3_mask_irq(unsigned int irq)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	int regval;
-+
-+	if (irq < ASIC3_NR_GPIO_IRQS) {
-+		printk(KERN_ERR "asic3_base: gpio mask attempt, irq %d\n",
-+		       irq);
-+		return;
-+	}
-+
-+	regval = __asic3_read_register(asic,
-+		_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask);
-+
-+	switch (irq - asic->irq_base) {
-+	case ASIC3_LED0_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK0);
-+		break;
-+	case ASIC3_LED1_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK1);
-+		break;
-+	case ASIC3_LED2_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK2);
-+		break;
-+	case ASIC3_SPI_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK3);
-+		break;
-+	case ASIC3_SMBUS_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK4);
-+		break;
-+	case ASIC3_OWM_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK5);
-+		break;
-+	default:
-+		printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq);
-+		break;
-+	}
-+}
-+
-+static void asic3_unmask_gpio_irq(unsigned int irq)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	u32 val, bank, index;
-+	unsigned long flags;
-+
-+	bank = asic3_irq_to_bank(asic, irq);
-+	index = asic3_irq_to_index(asic, irq);
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask);
-+	val &= ~(1 << index);
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+
-+static void asic3_unmask_irq(unsigned int irq)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	int regval;
-+
-+	if (irq < ASIC3_NR_GPIO_IRQS) {
-+		printk(KERN_ERR "asic3_base: gpio unmask attempt, irq %d\n",
-+		       irq);
-+		return;
-+	}
-+
-+	regval = __asic3_read_register(asic,
-+		_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask);
-+
-+	switch (irq - asic->irq_base) {
-+	case ASIC3_LED0_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK0);
-+		break;
-+	case ASIC3_LED1_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK1);
-+		break;
-+	case ASIC3_LED2_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK2);
-+		break;
-+	case ASIC3_SPI_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK3);
-+		break;
-+	case ASIC3_SMBUS_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK4);
-+		break;
-+	case ASIC3_OWM_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK5);
-+		break;
-+	default:
-+		printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq);
-+		break;
-+	}
-+}
-+
-+static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	u32 bank, index;
-+	unsigned long flags;
-+	u16 trigger, level, edge, bit;
-+
-+	bank = asic3_irq_to_bank(asic, irq);
-+	index = asic3_irq_to_index(asic, irq);
-+	bit = 1<<index;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	level = __asic3_read_register(asic,
-+		bank + _IPAQ_ASIC3_GPIO_LevelTrigger);
-+	edge = __asic3_read_register(asic,
-+		bank + _IPAQ_ASIC3_GPIO_EdgeTrigger);
-+	trigger = __asic3_read_register(asic,
-+		bank + _IPAQ_ASIC3_GPIO_TriggerType);
-+	asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
-+
-+	if (type == IRQT_RISING) {
-+		trigger |= bit;
-+		edge |= bit;
-+	} else if (type == IRQT_FALLING) {
-+		trigger |= bit;
-+		edge &= ~bit;
-+	} else if (type == IRQT_BOTHEDGE) {
-+		trigger |= bit;
-+		if (asic3_gpio_get_value(asic->dev, irq - asic->irq_base))
-+			edge &= ~bit;
-+		else
-+			edge |= bit;
-+		asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
-+	} else if (type == IRQT_LOW) {
-+		trigger &= ~bit;
-+		level &= ~bit;
-+	} else if (type == IRQT_HIGH) {
-+		trigger &= ~bit;
-+		level |= bit;
-+	} else {
-+		/*
-+		 * if type == IRQT_NOEDGE, we should mask interrupts, but
-+		 * be careful to not unmask them if mask was also called.
-+		 * Probably need internal state for mask.
-+		 */
-+		printk(KERN_NOTICE "asic3: irq type not changed.\n");
-+	}
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_LevelTrigger,
-+			       level);
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_EdgeTrigger,
-+			       edge);
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_TriggerType,
-+			       trigger);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+	return 0;
-+}
-+
-+static struct irq_chip asic3_gpio_irq_chip = {
-+	.name		= "ASIC3-GPIO",
-+	.ack		= asic3_mask_gpio_irq,
-+	.mask		= asic3_mask_gpio_irq,
-+	.unmask		= asic3_unmask_gpio_irq,
-+	.set_type	= asic3_gpio_irq_type,
-+};
-+
-+static struct irq_chip asic3_irq_chip = {
-+	.name		= "ASIC3",
-+	.ack		= asic3_mask_irq,
-+	.mask		= asic3_mask_irq,
-+	.unmask		= asic3_unmask_irq,
-+};
-+
-+static void asic3_release(struct device *dev)
-+{
-+	struct platform_device *sdev = to_platform_device(dev);
-+
-+	kfree(sdev->resource);
-+	kfree(sdev);
-+}
-+
-+int asic3_register_mmc(struct device *dev)
-+{
-+	struct platform_device *sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
-+	struct tmio_mmc_hwconfig *mmc_config = kmalloc(sizeof(*mmc_config),
-+						       GFP_KERNEL);
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct asic3_data *asic = dev->driver_data;
-+	struct asic3_platform_data *asic3_pdata = dev->platform_data;
-+	struct resource *res;
-+	int rc;
-+
-+	if (sdev == NULL || mmc_config == NULL)
-+		return -ENOMEM;
-+
-+	if (asic3_pdata->tmio_mmc_hwconfig) {
-+		memcpy(mmc_config, asic3_pdata->tmio_mmc_hwconfig,
-+		       sizeof(*mmc_config));
-+	} else {
-+		memset(mmc_config, 0, sizeof(*mmc_config));
-+	}
-+	mmc_config->address_shift = asic->bus_shift;
-+
-+	sdev->id = -1;
-+	sdev->name = "asic3_mmc";
-+	sdev->dev.parent = dev;
-+	sdev->num_resources = 2;
-+	sdev->dev.platform_data = mmc_config;
-+	sdev->dev.release = asic3_release;
-+
-+	res = kzalloc(sdev->num_resources * sizeof(struct resource),
-+		      GFP_KERNEL);
-+	if (res == NULL) {
-+		kfree(sdev);
-+		kfree(mmc_config);
-+		return -ENOMEM;
-+	}
-+	sdev->resource = res;
-+
-+	res[0].start = pdev->resource[2].start;
-+	res[0].end   = pdev->resource[2].end;
-+	res[0].flags = IORESOURCE_MEM;
-+	res[1].start = res[1].end = pdev->resource[3].start;
-+	res[1].flags = IORESOURCE_IRQ;
-+
-+	rc = platform_device_register(sdev);
-+	if (rc) {
-+		printk(KERN_ERR "asic3_base: "
-+		       "Could not register asic3_mmc device\n");
-+		kfree(res);
-+		kfree(sdev);
-+		return rc;
-+	}
-+
-+	asic->mmc_dev = sdev;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(asic3_register_mmc);
-+
-+int asic3_unregister_mmc(struct device *dev)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	platform_device_unregister(asic->mmc_dev);
-+	asic->mmc_dev = 0;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(asic3_unregister_mmc);
-+
-+#ifdef CONFIG_HTC_ASIC3_DS1WM
-+/*
-+ * 	DS1WM subdevice
-+ */
-+
-+static void asic3_ds1wm_enable(struct platform_device *ds1wm_dev)
-+{
-+	struct device *dev = ds1wm_dev->dev.parent;
-+
-+	/* Turn on external clocks and the OWM clock */
-+	asic3_set_clock_cdex(dev,
-+		CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM,
-+		CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM);
-+
-+	mdelay(1);
-+
-+	asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET,
-+			      ASIC3_EXTCF_OWM_RESET);
-+	mdelay(1);
-+	asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET, 0);
-+	mdelay(1);
-+
-+	/* Clear OWM_SMB, set OWM_EN */
-+	asic3_set_extcf_select(dev,
-+		ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN,
-+		0                   | ASIC3_EXTCF_OWM_EN);
-+
-+	mdelay(1);
-+}
-+
-+static void asic3_ds1wm_disable(struct platform_device *ds1wm_dev)
-+{
-+	struct device *dev = ds1wm_dev->dev.parent;
-+
-+	asic3_set_extcf_select(dev,
-+		ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN,
-+		0                   | 0);
-+
-+	asic3_set_clock_cdex(dev,
-+		CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM,
-+		CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | 0);
-+}
-+
-+
-+static struct resource asic3_ds1wm_resources[] = {
-+	{
-+		.start = _IPAQ_ASIC3_OWM_Base,
-+		.end   = _IPAQ_ASIC3_OWM_Base + 0x14 - 1,
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.start = ASIC3_OWM_IRQ,
-+		.end   = ASIC3_OWM_IRQ,
-+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-+			 IORESOURCE_IRQ_SOC_SUBDEVICE,
-+	},
-+};
-+
-+static struct ds1wm_platform_data ds1wm_pd = {
-+	.enable = asic3_ds1wm_enable,
-+	.disable = asic3_ds1wm_disable,
-+};
-+#endif
-+
-+static struct soc_device_data asic3_blocks[] = {
-+#ifdef CONFIG_HTC_ASIC3_DS1WM
-+	{
-+		.name = "ds1wm",
-+		.res = asic3_ds1wm_resources,
-+		.num_resources = ARRAY_SIZE(asic3_ds1wm_resources),
-+		.hwconfig = &ds1wm_pd,
-+	},
-+#endif
-+};
-+
-+static int asic3_probe(struct platform_device *pdev)
-+{
-+	struct asic3_platform_data *pdata = pdev->dev.platform_data;
-+	struct asic3_data *asic;
-+	struct device *dev = &pdev->dev;
-+	unsigned long clksel;
-+	int i, rc;
-+
-+	asic = kzalloc(sizeof(struct asic3_data), GFP_KERNEL);
-+	if (!asic)
-+		return -ENOMEM;
-+
-+	platform_set_drvdata(pdev, asic);
-+	asic->dev = &pdev->dev;
-+
-+	asic->mapping = ioremap(pdev->resource[0].start, IPAQ_ASIC3_MAP_SIZE);
-+	if (!asic->mapping) {
-+		printk(KERN_ERR "asic3: couldn't ioremap ASIC3\n");
-+		kfree (asic);
-+		return -ENOMEM;
-+	}
-+
-+	if (pdata && pdata->bus_shift)
-+		asic->bus_shift = pdata->bus_shift;
-+	else
-+		asic->bus_shift = 2;
-+
-+	/* XXX: should get correct SD clock values from pdata struct  */
-+	clksel = 0;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), clksel);
-+
-+	/* Register ASIC3's clocks. */
-+	clk_g.ctrlbit = (int)asic;
-+
-+	if (clk_register(&clk_g) < 0)
-+		printk(KERN_ERR "asic3: failed to register ASIC3 gclk\n");
-+
-+	for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++) {
-+		rc = clk_register(&asic3_clocks[i]);
-+		if (rc < 0)
-+			printk(KERN_ERR "asic3: "
-+			       "failed to register clock %s (%d)\n",
-+			       asic3_clocks[i].name, rc);
-+	}
-+
-+	__asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
-+	__asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
-+	__asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
-+	__asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
-+
-+	asic3_set_gpio_sleepmask_a(dev, 0xffff, 0xffff);
-+	asic3_set_gpio_sleepmask_b(dev, 0xffff, 0xffff);
-+	asic3_set_gpio_sleepmask_c(dev, 0xffff, 0xffff);
-+	asic3_set_gpio_sleepmask_d(dev, 0xffff, 0xffff);
-+
-+	if (pdata) {
-+		asic3_set_gpio_out_a(dev, 0xffff, pdata->gpio_a.init);
-+		asic3_set_gpio_out_b(dev, 0xffff, pdata->gpio_b.init);
-+		asic3_set_gpio_out_c(dev, 0xffff, pdata->gpio_c.init);
-+		asic3_set_gpio_out_d(dev, 0xffff, pdata->gpio_d.init);
-+
-+		asic3_set_gpio_dir_a(dev, 0xffff, pdata->gpio_a.dir);
-+		asic3_set_gpio_dir_b(dev, 0xffff, pdata->gpio_b.dir);
-+		asic3_set_gpio_dir_c(dev, 0xffff, pdata->gpio_c.dir);
-+		asic3_set_gpio_dir_d(dev, 0xffff, pdata->gpio_d.dir);
-+
-+		asic3_set_gpio_sleepmask_a(dev, 0xffff,
-+					   pdata->gpio_a.sleep_mask);
-+		asic3_set_gpio_sleepmask_b(dev, 0xffff,
-+					   pdata->gpio_b.sleep_mask);
-+		asic3_set_gpio_sleepmask_c(dev, 0xffff,
-+					   pdata->gpio_c.sleep_mask);
-+		asic3_set_gpio_sleepmask_d(dev, 0xffff,
-+					   pdata->gpio_d.sleep_mask);
-+
-+		asic3_set_gpio_sleepout_a(dev, 0xffff,
-+					  pdata->gpio_a.sleep_out);
-+		asic3_set_gpio_sleepout_b(dev, 0xffff,
-+					  pdata->gpio_b.sleep_out);
-+		asic3_set_gpio_sleepout_c(dev, 0xffff,
-+					  pdata->gpio_c.sleep_out);
-+		asic3_set_gpio_sleepout_d(dev, 0xffff,
-+					  pdata->gpio_d.sleep_out);
-+
-+		asic3_set_gpio_battfaultout_a(dev, 0xffff,
-+					      pdata->gpio_a.batt_fault_out);
-+		asic3_set_gpio_battfaultout_b(dev, 0xffff,
-+					      pdata->gpio_b.batt_fault_out);
-+		asic3_set_gpio_battfaultout_c(dev, 0xffff,
-+					      pdata->gpio_c.batt_fault_out);
-+		asic3_set_gpio_battfaultout_d(dev, 0xffff,
-+					      pdata->gpio_d.batt_fault_out);
-+
-+		asic3_set_gpio_sleepconf_a(dev, 0xffff,
-+					   pdata->gpio_a.sleep_conf);
-+		asic3_set_gpio_sleepconf_b(dev, 0xffff,
-+					   pdata->gpio_b.sleep_conf);
-+		asic3_set_gpio_sleepconf_c(dev, 0xffff,
-+					   pdata->gpio_c.sleep_conf);
-+		asic3_set_gpio_sleepconf_d(dev, 0xffff,
-+					   pdata->gpio_d.sleep_conf);
-+
-+		asic3_set_gpio_alt_fn_a(dev, 0xffff,
-+					pdata->gpio_a.alt_function);
-+		asic3_set_gpio_alt_fn_b(dev, 0xffff,
-+					pdata->gpio_b.alt_function);
-+		asic3_set_gpio_alt_fn_c(dev, 0xffff,
-+					pdata->gpio_c.alt_function);
-+		asic3_set_gpio_alt_fn_d(dev, 0xffff,
-+					pdata->gpio_d.alt_function);
-+	}
-+
-+	asic->irq_nr = -1;
-+	asic->irq_base = -1;
-+
-+	if (pdev->num_resources > 1)
-+		asic->irq_nr = pdev->resource[1].start;
-+
-+	if (asic->irq_nr != -1) {
-+		unsigned int i;
-+
-+		if (!pdata->irq_base) {
-+			printk(KERN_ERR "asic3: IRQ base not specified\n");
-+			asic3_remove(pdev);
-+			return -EINVAL;
-+		}
-+
-+		asic->irq_base = pdata->irq_base;
-+
-+		/* turn on clock to IRQ controller */
-+		clksel |= CLOCK_SEL_CX;
-+		__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL),
-+				       clksel);
-+
-+		printk(KERN_INFO "asic3: using irq %d-%d on irq %d\n",
-+		       asic->irq_base, asic->irq_base + ASIC3_NR_IRQS - 1,
-+		       asic->irq_nr);
-+
-+		for (i = 0 ; i < ASIC3_NR_IRQS ; i++) {
-+			int irq = i + asic->irq_base;
-+			if (i < ASIC3_NR_GPIO_IRQS) {
-+				set_irq_chip(irq, &asic3_gpio_irq_chip);
-+				set_irq_chip_data(irq, asic);
-+				set_irq_handler(irq, handle_level_irq);
-+				set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+			} else {
-+				/* The remaining IRQs are not GPIO */
-+				set_irq_chip(irq, &asic3_irq_chip);
-+				set_irq_chip_data(irq, asic);
-+				set_irq_handler(irq, handle_level_irq);
-+				set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+			}
-+		}
-+
-+		__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask),
-+					ASIC3_INTMASK_GINTMASK);
-+
-+		set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
-+		set_irq_type(asic->irq_nr, IRQT_RISING);
-+		set_irq_data(asic->irq_nr, asic);
-+	}
-+
-+#ifdef CONFIG_HTC_ASIC3_DS1WM
-+	ds1wm_pd.bus_shift = asic->bus_shift;
-+#endif
-+
-+	pdata->gpiodev_ops.get = asic3_gpio_get_value;
-+	pdata->gpiodev_ops.set = asic3_gpio_set_value;
-+	pdata->gpiodev_ops.to_irq = asic3_gpio_to_irq;
-+
-+	soc_add_devices(pdev, asic3_blocks, ARRAY_SIZE(asic3_blocks),
-+			&pdev->resource[0],
-+			asic->bus_shift - ASIC3_DEFAULT_ADDR_SHIFT,
-+			asic->irq_base);
-+
-+	if (pdev->num_resources > 2) {
-+		int rc;
-+		rc = asic3_register_mmc(dev);
-+		if (rc) {
-+			asic3_remove(pdev);
-+			return rc;
-+		}
-+	}
-+
-+	if (pdata && pdata->num_child_platform_devs != 0)
-+		platform_add_devices(pdata->child_platform_devs,
-+				     pdata->num_child_platform_devs);
-+
-+	return 0;
-+}
-+
-+static int asic3_remove(struct platform_device *pdev)
-+{
-+	struct asic3_platform_data *pdata = pdev->dev.platform_data;
-+	struct asic3_data *asic = platform_get_drvdata(pdev);
-+	int i;
-+
-+	if (pdata && pdata->num_child_platform_devs != 0) {
-+		for (i = 0; i < pdata->num_child_platform_devs; i++) {
-+			platform_device_unregister(
-+				pdata->child_platform_devs[i]);
-+		}
-+	}
-+
-+	if (asic->irq_nr != -1) {
-+		unsigned int i;
-+
-+		for (i = 0 ; i < ASIC3_NR_IRQS ; i++) {
-+			int irq = i + asic->irq_base;
-+			set_irq_flags(irq, 0);
-+			set_irq_handler (irq, NULL);
-+			set_irq_chip (irq, NULL);
-+			set_irq_chip_data(irq, NULL);
-+		}
-+
-+		set_irq_chained_handler(asic->irq_nr, NULL);
-+	}
-+
-+	if (asic->mmc_dev)
-+		asic3_unregister_mmc(&pdev->dev);
-+
-+	for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++)
-+		clk_unregister(&asic3_clocks[i]);
-+	clk_unregister(&clk_g);
-+
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), 0);
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), 0);
-+
-+	iounmap(asic->mapping);
-+
-+	kfree(asic);
-+
-+	return 0;
-+}
-+
-+static void asic3_shutdown(struct platform_device *pdev)
-+{
-+}
-+
-+#define ASIC3_SUSPEND_CDEX_MASK \
-+	(CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2)
-+static unsigned short suspend_cdex;
-+
-+static int asic3_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct asic3_data *asic = platform_get_drvdata(pdev);
-+	suspend_cdex = __asic3_read_register(asic,
-+		_IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX);
-+	/* The LEDs are still active during suspend */
-+	__asic3_write_register(asic,
-+		_IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX,
-+		suspend_cdex & ASIC3_SUSPEND_CDEX_MASK);
-+	return 0;
-+}
-+
-+static int asic3_resume(struct platform_device *pdev)
-+{
-+	struct asic3_data *asic = platform_get_drvdata(pdev);
-+	unsigned short intmask;
-+
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX),
-+			       suspend_cdex);
-+
-+	if (asic->irq_nr != -1) {
-+		/* Toggle the interrupt mask to try to get ASIC3 to show
-+		 * the CPU an interrupt edge. For more details see the
-+		 * kernel-discuss thread around 13 June 2005 with the
-+		 * subject "asic3 suspend / resume". */
-+		intmask = __asic3_read_register(asic,
-+				IPAQ_ASIC3_OFFSET(INTR, IntMask));
-+		__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask),
-+				       intmask & ~ASIC3_INTMASK_GINTMASK);
-+		mdelay(1);
-+		__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask),
-+				       intmask | ASIC3_INTMASK_GINTMASK);
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver asic3_device_driver = {
-+	.driver		= {
-+		.name	= "asic3",
-+	},
-+	.probe		= asic3_probe,
-+	.remove		= asic3_remove,
-+	.suspend	= asic3_suspend,
-+	.resume		= asic3_resume,
-+	.shutdown	= asic3_shutdown,
-+};
-+
-+static int __init asic3_base_init(void)
-+{
-+	int retval = 0;
-+	retval = platform_driver_register(&asic3_device_driver);
-+	return retval;
-+}
-+
-+static void __exit asic3_base_exit(void)
-+{
-+	platform_driver_unregister(&asic3_device_driver);
-+}
-+
-+#ifdef MODULE
-+module_init(asic3_base_init);
-+#else	/* start early for dependencies */
-+subsys_initcall(asic3_base_init);
-+#endif
-+module_exit(asic3_base_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>");
-+MODULE_DESCRIPTION("Core driver for HTC ASIC3");
-+MODULE_SUPPORTED_DEVICE("asic3");
-Index: linux-2.6.24/drivers/mfd/soc-core.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/mfd/soc-core.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,106 @@
-+/*
-+ * drivers/soc/soc-core.c
-+ *
-+ * core SoC support
-+ * Copyright (c) 2006 Ian Molton
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file contains functionality used by many SoC type devices.
-+ *
-+ * Created: 2006-11-28
-+ *
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include "soc-core.h"
-+
-+void soc_free_devices(struct platform_device *devices, int nr_devs)
-+{
-+	struct platform_device *dev = devices;
-+	int i;
-+
-+	for (i = 0; i < nr_devs; i++) {
-+		struct resource *res = dev->resource;
-+		platform_device_unregister(dev++);
-+		kfree(res);
-+	}
-+	kfree(devices);
-+}
-+EXPORT_SYMBOL_GPL(soc_free_devices);
-+
-+#define SIGNED_SHIFT(val, shift) ((shift) >= 0 ? ((val) << (shift)) : ((val) >> -(shift)))
-+
-+struct platform_device *soc_add_devices(struct platform_device *dev,
-+					struct soc_device_data *soc, int nr_devs,
-+					struct resource *mem,
-+					int relative_addr_shift, int irq_base)
-+{
-+	struct platform_device *devices;
-+	int i, r, base;
-+
-+	devices = kzalloc(nr_devs * sizeof(struct platform_device), GFP_KERNEL);
-+	if (!devices)
-+		return NULL;
-+
-+	for (i = 0; i < nr_devs; i++) {
-+		struct platform_device *sdev = &devices[i];
-+		struct soc_device_data *blk = &soc[i];
-+		struct resource *res;
-+
-+		sdev->id = -1;
-+		sdev->name = blk->name;
-+
-+		sdev->dev.parent = &dev->dev;
-+		sdev->dev.platform_data = (void *)blk->hwconfig;
-+		sdev->num_resources = blk->num_resources;
-+
-+		/* Allocate space for the subdevice resources */
-+		res = kzalloc (blk->num_resources * sizeof (struct resource), GFP_KERNEL);
-+		if (!res)
-+			goto fail;
-+
-+		for (r = 0 ; r < blk->num_resources ; r++) {
-+			res[r].name = blk->res[r].name; // Fixme - should copy
-+
-+			/* Find out base to use */
-+			base = 0;
-+			if (blk->res[r].flags & IORESOURCE_MEM) {
-+				base = mem->start;
-+			} else if ((blk->res[r].flags & IORESOURCE_IRQ) &&
-+				(blk->res[r].flags & IORESOURCE_IRQ_MFD_SUBDEVICE)) {
-+				base = irq_base;
-+			}
-+
-+			/* Adjust resource */
-+			if (blk->res[r].flags & IORESOURCE_MEM) {
-+				res[r].parent = mem;
-+				res[r].start = base + SIGNED_SHIFT(blk->res[r].start, relative_addr_shift);
-+				res[r].end   = base + SIGNED_SHIFT(blk->res[r].end,   relative_addr_shift);
-+			} else {
-+				res[r].start = base + blk->res[r].start;
-+				res[r].end   = base + blk->res[r].end;
-+			}
-+			res[r].flags = blk->res[r].flags;
-+		}
-+
-+		sdev->resource = res;
-+		if (platform_device_register(sdev)) {
-+			kfree(res);
-+			goto fail;
-+		}
-+
-+		printk(KERN_INFO "SoC: registering %s\n", blk->name);
-+	}
-+	return devices;
-+
-+fail:
-+	soc_free_devices(devices, i + 1);
-+	return NULL;
-+}
-+EXPORT_SYMBOL_GPL(soc_add_devices);
-Index: linux-2.6.24/drivers/mfd/soc-core.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/mfd/soc-core.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,30 @@
-+/*
-+ * drivers/soc/soc-core.h
-+ *
-+ * core SoC support
-+ * Copyright (c) 2006 Ian Molton
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file contains prototypes for the functions in soc-core.c
-+ *
-+ * Created: 2006-11-28
-+ *
-+ */
-+
-+struct soc_device_data {
-+	char *name;
-+	struct resource *res;
-+	int num_resources;
-+	void *hwconfig; /* platform_data to pass to the subdevice */
-+};
-+
-+struct platform_device *soc_add_devices(struct platform_device *dev,
-+					struct soc_device_data *soc, int n_devs,
-+					struct resource *mem,
-+					int relative_addr_shift, int irq_base);
-+
-+void soc_free_devices(struct platform_device *devices, int nr_devs);
-+
-Index: linux-2.6.24/include/asm-arm/arch-pxa/clock.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/clock.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,27 @@
-+/*
-+ *  linux/include/asm-arm/arch-pxa/clock.h
-+ *
-+ *  Copyright (C) 2006 Erik Hovland
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+struct clk {
-+	struct list_head	node;
-+	struct module		*owner;
-+	struct clk		*parent;
-+	const char		*name;
-+	int			id;
-+	unsigned int		enabled;
-+	unsigned long		rate;
-+	unsigned long		ctrlbit;
-+
-+	void			(*enable)(struct clk *);
-+	void			(*disable)(struct clk *);
-+};
-+
-+
-+extern int clk_register(struct clk *clk);
-+extern void clk_unregister(struct clk *clk);
-Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-asic.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-asic.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,213 @@
-+/*
-+ * include/asm/arm/arch-pxa/htcuniversal-asic.h
-+ *
-+ * Authors: Giuseppe Zompatori <giuseppe_zompatori@yahoo.it>
-+ *
-+ * based on previews work, see below:
-+ *
-+ * include/asm/arm/arch-pxa/hx4700-asic.h
-+ *      Copyright (c) 2004 SDG Systems, LLC
-+ *
-+ */
-+
-+#ifndef _HTCUNIVERSAL_ASIC_H_
-+#define _HTCUNIVERSAL_ASIC_H_
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+
-+/* ASIC3 */
-+
-+#define HTCUNIVERSAL_ASIC3_GPIO_PHYS	PXA_CS4_PHYS
-+#define HTCUNIVERSAL_ASIC3_MMC_PHYS	PXA_CS3_PHYS
-+
-+/* TODO: some information is missing here */
-+
-+/* ASIC3 GPIO A bank */
-+
-+#define GPIOA_I2C_EN	 	 	 0	/* Output */
-+#define GPIOA_SPK_PWR1_ON	 	 1	/* Output */
-+#define GPIOA_AUDIO_PWR_ON	 	 2	/* Output */
-+#define GPIOA_EARPHONE_PWR_ON	 	 3	/* Output */
-+
-+#define GPIOA_UNKNOWN4			 4	/* Output */
-+#define GPIOA_BUTTON_BACKLIGHT_N	 5	/* Input  */
-+#define GPIOA_SPK_PWR2_ON	 	 6	/* Output */
-+#define GPIOA_BUTTON_RECORD_N		 7	/* Input  */
-+
-+#define GPIOA_BUTTON_CAMERA_N		 8	/* Input  */
-+#define GPIOA_UNKNOWN9			 9	/* Output */
-+#define GPIOA_FLASHLIGHT 		10	/* Output */
-+#define GPIOA_COVER_ROTATE_N 		11	/* Input  */
-+
-+#define GPIOA_TOUCHSCREEN_N		12	/* Input  */
-+#define GPIOA_VOL_UP_N  		13	/* Input  */
-+#define GPIOA_VOL_DOWN_N 		14	/* Input  */
-+#define GPIOA_LCD_PWR5_ON 		15	/* Output */
-+
-+/* ASIC3 GPIO B bank */
-+
-+#define GPIOB_BB_READY			 0	/* Input */
-+#define GPIOB_CODEC_PDN			 1	/* Output */
-+#define GPIOB_UNKNOWN2			 2	/* Input  */
-+#define GPIOB_BB_UNKNOWN3		 3	/* Input  */
-+
-+#define GPIOB_BT_IRQ			 4	/* Input  */
-+#define GPIOB_CLAMSHELL_N		 5	/* Input  */
-+#define GPIOB_LCD_PWR3_ON		 6	/* Output */
-+#define GPIOB_BB_ALERT			 7	/* Input  */
-+
-+#define GPIOB_BB_RESET2			 8	/* Output */
-+#define GPIOB_EARPHONE_N		 9	/* Input  */
-+#define GPIOB_MICRECORD_N		10	/* Input  */
-+#define GPIOB_NIGHT_SENSOR		11	/* Input  */
-+
-+#define GPIOB_UMTS_DCD			12	/* Input  */
-+#define GPIOB_UNKNOWN13			13	/* Input  */
-+#define GPIOB_CHARGE_EN 		14	/* Output */
-+#define GPIOB_USB_PUEN 			15	/* Output */
-+
-+/* ASIC3 GPIO C bank */
-+
-+#define GPIOC_LED_BTWIFI  	   	 0	/* Output */
-+#define GPIOC_LED_RED		   	 1	/* Output */
-+#define GPIOC_LED_GREEN			 2	/* Output */
-+#define GPIOC_BOARDID3  		 3	/* Input  */
-+
-+#define GPIOC_WIFI_IRQ_N  		 4	/* Input  */
-+#define GPIOC_WIFI_RESET  		 5	/* Output */
-+#define GPIOC_WIFI_PWR1_ON  		 6	/* Output */
-+#define GPIOC_BT_RESET  		 7	/* Output */
-+
-+#define GPIOC_UNKNOWN8  		 8	/* Output */
-+#define GPIOC_LCD_PWR1_ON		 9	/* Output */
-+#define GPIOC_LCD_PWR2_ON 		10	/* Output */
-+#define GPIOC_BOARDID2  		11	/* Input  */
-+
-+#define GPIOC_BOARDID1			12	/* Input  */
-+#define GPIOC_BOARDID0  		13	/* Input  */
-+#define GPIOC_BT_PWR_ON			14	/* Output */
-+#define GPIOC_CHARGE_ON			15	/* Output */
-+
-+/* ASIC3 GPIO D bank */
-+
-+#define GPIOD_KEY_OK_N			 0	/* Input  */
-+#define GPIOD_KEY_RIGHT_N		 1	/* Input  */
-+#define GPIOD_KEY_LEFT_N		 2	/* Input  */
-+#define GPIOD_KEY_DOWN_N		 3	/* Input  */
-+
-+#define GPIOD_KEY_UP_N  		 4	/* Input  */
-+#define GPIOD_SDIO_DET			 5	/* Input  */
-+#define GPIOD_WIFI_PWR2_ON		 6	/* Output */
-+#define GPIOD_HW_REBOOT			 7	/* Output */
-+
-+#define GPIOD_BB_RESET1			 8	/* Output */
-+#define GPIOD_UNKNOWN9			 9	/* Output */
-+#define GPIOD_VIBRA_PWR_ON		10	/* Output */
-+#define GPIOD_WIFI_PWR3_ON		11	/* Output */
-+
-+#define GPIOD_FL_PWR_ON  		12	/* Output */
-+#define GPIOD_LCD_PWR4_ON		13	/* Output */
-+#define GPIOD_BL_KEYP_PWR_ON		14	/* Output */
-+#define GPIOD_BL_KEYB_PWR_ON		15	/* Output */
-+
-+extern struct platform_device htcuniversal_asic3;
-+
-+/* ASIC3 GPIO A bank */
-+
-+#define GPIO_I2C_EN	 	 	0*16+GPIOA_I2C_EN
-+#define GPIO_SPK_PWR1_ON	 	0*16+GPIOA_SPK_PWR1_ON
-+#define GPIO_AUDIO_PWR_ON	 	0*16+GPIOA_AUDIO_PWR_ON
-+#define GPIO_EARPHONE_PWR_ON	 	0*16+GPIOA_EARPHONE_PWR_ON
-+
-+#define GPIO_UNKNOWNA4			0*16+GPIOA_UNKNOWN4
-+#define GPIO_BUTTON_BACKLIGHT_N		0*16+GPIOA_BUTTON_BACKLIGHT_N
-+#define GPIO_SPK_PWR2_ON	 	0*16+GPIOA_SPK_PWR2_ON
-+#define GPIO_BUTTON_RECORD_N		0*16+GPIOA_BUTTON_RECORD_N
-+
-+#define GPIO_BUTTON_CAMERA_N		0*16+GPIOA_BUTTON_CAMERA_N
-+#define GPIO_UNKNOWNA9			0*16+GPIOA_UNKNOWN9
-+#define GPIO_FLASHLIGHT 		0*16+GPIOA_FLASHLIGHT
-+#define GPIO_COVER_ROTATE_N 		0*16+GPIOA_COVER_ROTATE_N
-+
-+#define GPIO_TOUCHSCREEN_N		0*16+GPIOA_TOUCHSCREEN_N
-+#define GPIO_VOL_UP_N  			0*16+GPIOA_VOL_UP_N
-+#define GPIO_VOL_DOWN_N 		0*16+GPIOA_VOL_DOWN_N
-+#define GPIO_LCD_PWR5_ON 		0*16+GPIOA_LCD_PWR5_ON
-+
-+/* ASIC3 GPIO B bank */
-+
-+#define GPIO_BB_READY			1*16+GPIOB_BB_READY
-+#define GPIO_CODEC_PDN			1*16+GPIOB_CODEC_PDN
-+#define GPIO_UNKNOWNB2			1*16+GPIOB_UNKNOWN2
-+#define GPIO_BB_UNKNOWN3		1*16+GPIOB_BB_UNKNOWN3
-+
-+#define GPIO_BT_IRQ			1*16+GPIOB_BT_IRQ
-+#define GPIO_CLAMSHELL_N		1*16+GPIOB_CLAMSHELL_N
-+#define GPIO_LCD_PWR3_ON		1*16+GPIOB_LCD_PWR3_ON
-+#define GPIO_BB_ALERT			1*16+GPIOB_BB_ALERT
-+
-+#define GPIO_BB_RESET2			1*16+GPIOB_BB_RESET2
-+#define GPIO_EARPHONE_N			1*16+GPIOB_EARPHONE_N
-+#define GPIO_MICRECORD_N		1*16+GPIOB_MICRECORD_N
-+#define GPIO_NIGHT_SENSOR		1*16+GPIOB_NIGHT_SENSOR
-+
-+#define GPIO_UMTS_DCD			1*16+GPIOB_UMTS_DCD
-+#define GPIO_UNKNOWNB13			1*16+GPIOB_UNKNOWN13
-+#define GPIO_CHARGE_EN 			1*16+GPIOB_CHARGE_EN
-+#define GPIO_USB_PUEN 			1*16+GPIOB_USB_PUEN
-+
-+/* ASIC3 GPIO C bank */
-+
-+#define GPIO_LED_BTWIFI  	   	2*16+GPIOC_LED_BTWIFI
-+#define GPIO_LED_RED		   	2*16+GPIOC_LED_RED
-+#define GPIO_LED_GREEN			2*16+GPIOC_LED_GREEN
-+#define GPIO_BOARDID3  			2*16+GPIOC_BOARDID3
-+
-+#define GPIO_WIFI_IRQ_N  		2*16+GPIOC_WIFI_IRQ_N
-+#define GPIO_WIFI_RESET  		2*16+GPIOC_WIFI_RESET
-+#define GPIO_WIFI_PWR1_ON  		2*16+GPIOC_WIFI_PWR1_ON
-+#define GPIO_BT_RESET  			2*16+GPIOC_BT_RESET
-+
-+#define GPIO_UNKNOWNC8  		2*16+GPIOC_UNKNOWN8
-+#define GPIO_LCD_PWR1_ON		2*16+GPIOC_LCD_PWR1_ON
-+#define GPIO_LCD_PWR2_ON 		2*16+GPIOC_LCD_PWR2_ON
-+#define GPIO_BOARDID2  			2*16+GPIOC_BOARDID2
-+
-+#define GPIO_BOARDID1			2*16+GPIOC_BOARDID1
-+#define GPIO_BOARDID0  			2*16+GPIOC_BOARDID0
-+#define GPIO_BT_PWR_ON			2*16+GPIOC_BT_PWR_ON
-+#define GPIO_CHARGE_ON			2*16+GPIOC_CHARGE_ON
-+
-+/* ASIC3 GPIO D bank */
-+
-+#define GPIO_KEY_OK_N			3*16+GPIOD_KEY_OK_N
-+#define GPIO_KEY_RIGHT_N		3*16+GPIOD_KEY_RIGHT_N
-+#define GPIO_KEY_LEFT_N			3*16+GPIOD_KEY_LEFT_N
-+#define GPIO_KEY_DOWN_N			3*16+GPIOD_KEY_DOWN_N
-+
-+#define GPIO_KEY_UP_N  			3*16+GPIOD_KEY_UP_N
-+#define GPIO_SDIO_DET			3*16+GPIOD_SDIO_DET
-+#define GPIO_WIFI_PWR2_ON		3*16+GPIOD_WIFI_PWR2_ON
-+#define GPIO_HW_REBOOT			3*16+GPIOD_HW_REBOOT
-+
-+#define GPIO_BB_RESET1			3*16+GPIOD_BB_RESET1
-+#define GPIO_UNKNOWND9			3*16+GPIOD_UNKNOWN9
-+#define GPIO_VIBRA_PWR_ON		3*16+GPIOD_VIBRA_PWR_ON
-+#define GPIO_WIFI_PWR3_ON		3*16+GPIOD_WIFI_PWR3_ON
-+
-+#define GPIO_FL_PWR_ON  		3*16+GPIOD_FL_PWR_ON
-+#define GPIO_LCD_PWR4_ON		3*16+GPIOD_LCD_PWR4_ON
-+#define GPIO_BL_KEYP_PWR_ON		3*16+GPIOD_BL_KEYP_PWR_ON
-+#define GPIO_BL_KEYB_PWR_ON		3*16+GPIOD_BL_KEYB_PWR_ON
-+
-+#define HTCUNIVERSAL_EGPIO_BASE	PXA_CS2_PHYS+0x02000000
-+
-+#define EGPIO4_ON			 4  /* something */
-+#define EGPIO5_BT_3V3_ON		 5  /* Bluetooth related */
-+#define EGPIO6_WIFI_ON			 6  /* WLAN related*/
-+
-+extern void htcuniversal_egpio_enable( u_int16_t bits );
-+extern void htcuniversal_egpio_disable( u_int16_t bits );
-+
-+#endif /* _HTCUNIVERSAL_ASIC_H_ */
-+
-Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-gpio.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-gpio.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,220 @@
-+/*
-+ * include/asm-arm/arch-pxa/htcuniversal-gpio.h
-+ * History:
-+ *
-+ * 2004-12-10 Michael Opdenacker. Wrote down GPIO settings as identified by Jamey Hicks.
-+ *            Reused the h2200-gpio.h file as a template.
-+ */
-+
-+#ifndef _HTCUNIVERSAL_GPIO_H_
-+#define _HTCUNIVERSAL_GPIO_H_
-+
-+#include <asm/arch/pxa-regs.h>
-+
-+#define GET_HTCUNIVERSAL_GPIO(gpio) \
-+	(GPLR(GPIO_NR_HTCUNIVERSAL_ ## gpio) & GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio))
-+
-+#define SET_HTCUNIVERSAL_GPIO(gpio, setp) \
-+do { \
-+if (setp) \
-+	GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \
-+else \
-+	GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \
-+} while (0)
-+
-+#define SET_HTCUNIVERSAL_GPIO_N(gpio, setp) \
-+do { \
-+if (setp) \
-+	GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \
-+else \
-+	GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \
-+} while (0)
-+
-+#define HTCUNIVERSAL_IRQ(gpio) \
-+	IRQ_GPIO(GPIO_NR_HTCUNIVERSAL_ ## gpio)
-+
-+#define GPIO_NR_HTCUNIVERSAL_KEY_ON_N			0
-+#define GPIO_NR_HTCUNIVERSAL_GP_RST_N			1
-+
-+#define GPIO_NR_HTCUNIVERSAL_USB_DET			9
-+#define GPIO_NR_HTCUNIVERSAL_POWER_DET			10
-+
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD7			12
-+#define GPIO_NR_HTCUNIVERSAL_ASIC3_SDIO_INT_N		13
-+#define GPIO_NR_HTCUNIVERSAL_ASIC3_EXT_INT		14
-+#define GPIO_NR_HTCUNIVERSAL_CS1_N			15
-+
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD6			17
-+#define GPIO_NR_HTCUNIVERSAL_RDY			18
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_START		19
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7			22
-+#define GPIO_NR_HTCUNIVERSAL_SPI_CLK			23
-+#define GPIO_NR_HTCUNIVERSAL_SPI_FRM			24
-+#define GPIO_NR_HTCUNIVERSAL_SPI_DO			25
-+#define GPIO_NR_HTCUNIVERSAL_SPI_DI			26
-+
-+#define GPIO_NR_HTCUNIVERSAL_CODEC_ON			27
-+#define GPIO_NR_HTCUNIVERSAL_I2S_BCK			28
-+#define GPIO_NR_HTCUNIVERSAL_I2S_DIN			29
-+#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT			30
-+#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC			31
-+
-+#define GPIO_NR_HTCUNIVERSAL_RS232_ON			32
-+#define GPIO_NR_HTCUNIVERSAL_CS5_N			33
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD			34
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS		35
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7			36
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3			37
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4			38
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD			39
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6			40
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS		41
-+#define GPIO_NR_HTCUNIVERSAL_BT_RXD			42
-+#define GPIO_NR_HTCUNIVERSAL_BT_TXD			43
-+#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS		44
-+#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS		45
-+
-+#define GPIO_NR_HTCUNIVERSAL_SIR_RXD			42
-+#define GPIO_NR_HTCUNIVERSAL_SIR_TXD			43
-+
-+#define GPIO_NR_HTCUNIVERSAL_POE_N			48
-+#define GPIO_NR_HTCUNIVERSAL_PWE_N			49
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD3			50
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD2			51
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD4			52
-+
-+#define GPIO_NR_HTCUNIVERSAL_CIF_MCLK			53
-+#define GPIO_NR_HTCUNIVERSAL_CIF_PCLK			54
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD1			55
-+
-+#define GPIO_NR_HTCUNIVERSAL_LDD0			58
-+#define GPIO_NR_HTCUNIVERSAL_LDD1			59
-+#define GPIO_NR_HTCUNIVERSAL_LDD2			60
-+#define GPIO_NR_HTCUNIVERSAL_LDD3			61
-+#define GPIO_NR_HTCUNIVERSAL_LDD4			62
-+#define GPIO_NR_HTCUNIVERSAL_LDD5			63
-+#define GPIO_NR_HTCUNIVERSAL_LDD6			64
-+#define GPIO_NR_HTCUNIVERSAL_LDD7			65
-+#define GPIO_NR_HTCUNIVERSAL_LDD8			66
-+#define GPIO_NR_HTCUNIVERSAL_LDD9			67
-+#define GPIO_NR_HTCUNIVERSAL_LDD10			68
-+#define GPIO_NR_HTCUNIVERSAL_LDD11			69
-+#define GPIO_NR_HTCUNIVERSAL_LDD12			70
-+#define GPIO_NR_HTCUNIVERSAL_LDD13			71
-+#define GPIO_NR_HTCUNIVERSAL_LDD14			72
-+#define GPIO_NR_HTCUNIVERSAL_LDD15			73
-+
-+#define GPIO_NR_HTCUNIVERSAL_LFCLK_RD			74
-+#define GPIO_NR_HTCUNIVERSAL_LFCLK_A0			75
-+#define GPIO_NR_HTCUNIVERSAL_LFCLK_WR			76
-+#define GPIO_NR_HTCUNIVERSAL_LBIAS			77
-+
-+#define GPIO_NR_HTCUNIVERSAL_CS2_N			78
-+#define GPIO_NR_HTCUNIVERSAL_CS3_N			79
-+#define GPIO_NR_HTCUNIVERSAL_CS4_N			80
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD0			81
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD5			82
-+
-+#define GPIO_NR_HTCUNIVERSAL_CIF_LV			84
-+#define GPIO_NR_HTCUNIVERSAL_CIF_FV			85
-+
-+#define GPIO_NR_HTCUNIVERSAL_LCD1			86
-+#define GPIO_NR_HTCUNIVERSAL_LCD2			87
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5			90
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6			91
-+
-+#define GPIO_NR_HTCUNIVERSAL_DREQ1			97
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_RESET		98
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0			100
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1			101
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2			102
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0			103
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1			104
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2			105
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3			106
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4			107
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5			108
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UNKNOWN 		109
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_OFF			110
-+
-+#define GPIO_NR_HTCUNIVERSAL_USB_PUEN			112
-+#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK			113
-+
-+#define GPIO_NR_HTCUNIVERSAL_PWM_OUT1			115
-+
-+#define GPIO_NR_HTCUNIVERSAL_I2C_SCL			117
-+#define GPIO_NR_HTCUNIVERSAL_I2C_SDA			118
-+
-+#if 0
-+#define GPIO_NR_HTCUNIVERSAL_CPU_BATT_FAULT_N
-+#define GPIO_NR_HTCUNIVERSAL_ASIC3_RESET_N
-+#define GPIO_NR_HTCUNIVERSAL_CHARGE_EN_N
-+#define GPIO_NR_HTCUNIVERSAL_FLASH_VPEN
-+#define GPIO_NR_HTCUNIVERSAL_BATT_OFF
-+#define GPIO_NR_HTCUNIVERSAL_USB_CHARGE_RATE
-+#define GPIO_NR_HTCUNIVERSAL_BL_DETECT_N
-+#define GPIO_NR_HTCUNIVERSAL_CPU_HW_RESET_N
-+#endif
-+
-+
-+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD	(23 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD	(24 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD	(25 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD	(26 | GPIO_ALT_FN_1_IN)
-+
-+#define GPIO_NR_HTCUNIVERSAL_I2S_BCK_MD			(28 | GPIO_ALT_FN_1_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_I2S_DIN_MD			(29 | GPIO_ALT_FN_2_IN)
-+#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT_MD		(30 | GPIO_ALT_FN_1_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC_MD		(31 | GPIO_ALT_FN_1_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD		(34 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD		(35 | GPIO_ALT_FN_1_IN)
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD		(39 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD		(41 | GPIO_ALT_FN_2_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_BT_RXD_MD			(42 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_BT_TXD_MD			(43 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD		(44 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD		(45 | GPIO_ALT_FN_2_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_SIR_RXD_MD			(46 | GPIO_ALT_FN_2_IN)
-+#define GPIO_NR_HTCUNIVERSAL_SIR_TXD_MD			(47 | GPIO_ALT_FN_1_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_POE_N_MD			(48 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH)
-+#define GPIO_NR_HTCUNIVERSAL_PWE_N_MD			(49 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH)
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN0 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN1 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN2 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN3 | GPIO_ALT_FN_3_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN4 | GPIO_ALT_FN_2_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN5 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN6 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN7 | GPIO_ALT_FN_3_IN)
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT0 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT1 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT2 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT3 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT4 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT5 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT6 | GPIO_ALT_FN_1_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT7 | GPIO_ALT_FN_1_OUT)
-+
-+
-+#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK_MD		(113 | GPIO_ALT_FN_1_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_PWM1OUT_MD			(115 | GPIO_ALT_FN_3_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_I2C_SCL_MD			(117 | GPIO_ALT_FN_1_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_I2C_SDA_MD			(118 | GPIO_ALT_FN_1_OUT)
-+
-+#endif /* _HTCUNIVERSAL_GPIO_H */
-Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-init.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal-init.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,14 @@
-+/*
-+ * include/asm/arm/arch-pxa/htcuniversal-init.h
-+ *      Copyright (c) 2004 SDG Systems, LLC
-+ */
-+
-+#ifndef _HTCUNIVERSAL_INIT_H_
-+#define _HTCUNIVERSAL_INIT_H_
-+
-+/* htcuniversal initialization data should be found here
-+ * See -init.h files from other devices for details
-+ */
-+
-+#endif /* _HTCUNIVERSAL_INIT_H_ */
-+
-Index: linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/htcuniversal.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,3 @@
-+#include <asm/arch/irqs.h>
-+
-+#define HTCUNIVERSAL_ASIC3_IRQ_BASE IRQ_BOARD_START
-Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-pm_ll.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-pm_ll.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,6 @@
-+struct pxa_ll_pm_ops {
-+	void (*suspend)(unsigned long);
-+	void (*resume)(void);
-+};
-+
-+extern struct pxa_ll_pm_ops *pxa_pm_set_ll_ops(struct pxa_ll_pm_ops *new_ops);
-Index: linux-2.6.24/include/asm-arm/hardware/asic3_keys.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/hardware/asic3_keys.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,18 @@
-+#include <linux/input.h>
-+
-+struct asic3_keys_button {
-+	/* Configuration parameters */
-+	int keycode;
-+	int gpio;
-+	int active_low;
-+	char *desc;
-+	int type;
-+	/* Internal state vars - add below */
-+};
-+
-+struct asic3_keys_platform_data {
-+	struct asic3_keys_button *buttons;
-+	int nbuttons;
-+        struct input_dev *input;
-+        struct device *asic3_dev;
-+};
-Index: linux-2.6.24/include/asm-arm/hardware/asic3_leds.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/hardware/asic3_leds.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,34 @@
-+/*
-+ * LEDs support for HTC ASIC3 devices.
-+ *
-+ * Copyright (c) 2006  Anton Vorontsov <cbou@mail.ru>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+
-+struct asic3_leds_machinfo;
-+
-+struct asic3_led {
-+	struct led_classdev led_cdev;
-+	int hw_num;	/* Number of "hardware-accelerated" led */
-+	int gpio_num;	/* Number of GPIO if hw_num == -1 */
-+	struct asic3_leds_machinfo *machinfo;
-+};
-+
-+struct asic3_leds_machinfo {
-+	int num_leds;
-+	struct asic3_led *leds;
-+	struct platform_device *asic3_pdev;
-+};
-+
-+extern int asic3_leds_register(void);
-+extern void asic3_leds_unregister(void);
-+
-Index: linux-2.6.24/include/asm-arm/hardware/ipaq-asic3.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/hardware/ipaq-asic3.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,602 @@
-+/*
-+ *
-+ * Definitions for the HTC ASIC3 chip found in several handheld devices
-+ *
-+ * Copyright 2001 Compaq Computer Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-+ * FITNESS FOR ANY PARTICULAR PURPOSE.
-+ *
-+ * Author: Andrew Christian
-+ *
-+ */
-+
-+#ifndef IPAQ_ASIC3_H
-+#define IPAQ_ASIC3_H
-+
-+/****************************************************/
-+/* IPAQ, ASIC #3, replaces ASIC #1 */
-+
-+#define IPAQ_ASIC3_OFFSET(x,y) (_IPAQ_ASIC3_ ## x ## _Base + _IPAQ_ASIC3_ ## x ## _ ## y)
-+#define IPAQ_ASIC3_GPIO_OFFSET(x,y) (_IPAQ_ASIC3_GPIO_ ## x ## _Base + _IPAQ_ASIC3_GPIO_ ## y)
-+
-+
-+/* All offsets below are specified with the following address bus shift */
-+#define ASIC3_DEFAULT_ADDR_SHIFT 2
-+
-+#define _IPAQ_ASIC3_GPIO_A_Base      0x0000
-+#define _IPAQ_ASIC3_GPIO_B_Base      0x0100
-+#define _IPAQ_ASIC3_GPIO_C_Base      0x0200
-+#define _IPAQ_ASIC3_GPIO_D_Base      0x0300
-+
-+#define _IPAQ_ASIC3_GPIO_Mask          0x00    /* R/W 0:don't mask, 1:mask interrupt */
-+#define _IPAQ_ASIC3_GPIO_Direction     0x04    /* R/W 0:input, 1:output              */
-+#define _IPAQ_ASIC3_GPIO_Out           0x08    /* R/W 0:output low, 1:output high    */
-+#define _IPAQ_ASIC3_GPIO_TriggerType   0x0c    /* R/W 0:level, 1:edge                */
-+#define _IPAQ_ASIC3_GPIO_EdgeTrigger   0x10    /* R/W 0:falling, 1:rising            */
-+#define _IPAQ_ASIC3_GPIO_LevelTrigger  0x14    /* R/W 0:low, 1:high level detect     */
-+#define _IPAQ_ASIC3_GPIO_SleepMask     0x18    /* R/W 0:don't mask, 1:mask trigger in sleep mode  */
-+#define _IPAQ_ASIC3_GPIO_SleepOut      0x1c    /* R/W level 0:low, 1:high in sleep mode           */
-+#define _IPAQ_ASIC3_GPIO_BattFaultOut  0x20    /* R/W level 0:low, 1:high in batt_fault           */
-+#define _IPAQ_ASIC3_GPIO_IntStatus     0x24    /* R/W 0:none, 1:detect               */
-+#define _IPAQ_ASIC3_GPIO_AltFunction   0x28	/* R/W 0:normal control 1:LED register control */
-+#define _IPAQ_ASIC3_GPIO_SleepConf     0x2c    /* R/W bit 1: autosleep 0: disable gposlpout in normal mode, enable gposlpout in sleep mode */
-+#define _IPAQ_ASIC3_GPIO_Status        0x30    /* R   Pin status                                  */
-+
-+#define IPAQ_ASIC3_GPIO_A_MASK(_b)            IPAQ_ASIC3_GPIO( _b, u16, A, Mask )
-+#define IPAQ_ASIC3_GPIO_A_DIR(_b)             IPAQ_ASIC3_GPIO( _b, u16, A, Direction )
-+#define IPAQ_ASIC3_GPIO_A_OUT(_b)             IPAQ_ASIC3_GPIO( _b, u16, A, Out )
-+#define IPAQ_ASIC3_GPIO_A_LEVELTRI(_b)        IPAQ_ASIC3_GPIO( _b, u16, A, TriggerType )
-+#define IPAQ_ASIC3_GPIO_A_RISING(_b)          IPAQ_ASIC3_GPIO( _b, u16, A, EdgeTrigger )
-+#define IPAQ_ASIC3_GPIO_A_LEVEL(_b)           IPAQ_ASIC3_GPIO( _b, u16, A, LevelTrigger )
-+#define IPAQ_ASIC3_GPIO_A_SLEEP_MASK(_b)      IPAQ_ASIC3_GPIO( _b, u16, A, SleepMask )
-+#define IPAQ_ASIC3_GPIO_A_SLEEP_OUT(_b)       IPAQ_ASIC3_GPIO( _b, u16, A, SleepOut )
-+#define IPAQ_ASIC3_GPIO_A_BATT_FAULT_OUT(_b)  IPAQ_ASIC3_GPIO( _b, u16, A, BattFaultOut )
-+#define IPAQ_ASIC3_GPIO_A_INT_STATUS(_b)      IPAQ_ASIC3_GPIO( _b, u16, A, IntStatus )
-+#define IPAQ_ASIC3_GPIO_A_ALT_FUNCTION(_b)    IPAQ_ASIC3_GPIO( _b, u16, A, AltFunction )
-+#define IPAQ_ASIC3_GPIO_A_SLEEP_CONF(_b)      IPAQ_ASIC3_GPIO( _b, u16, A, SleepConf )
-+#define IPAQ_ASIC3_GPIO_A_STATUS(_b)          IPAQ_ASIC3_GPIO( _b, u16, A, Status )
-+
-+#define IPAQ_ASIC3_GPIO_B_MASK(_b)            IPAQ_ASIC3_GPIO( _b, u16, B, Mask )
-+#define IPAQ_ASIC3_GPIO_B_DIR(_b)             IPAQ_ASIC3_GPIO( _b, u16, B, Direction )
-+#define IPAQ_ASIC3_GPIO_B_OUT(_b)             IPAQ_ASIC3_GPIO( _b, u16, B, Out )
-+#define IPAQ_ASIC3_GPIO_B_LEVELTRI(_b)        IPAQ_ASIC3_GPIO( _b, u16, B, TriggerType )
-+#define IPAQ_ASIC3_GPIO_B_RISING(_b)          IPAQ_ASIC3_GPIO( _b, u16, B, EdgeTrigger )
-+#define IPAQ_ASIC3_GPIO_B_LEVEL(_b)           IPAQ_ASIC3_GPIO( _b, u16, B, LevelTrigger )
-+#define IPAQ_ASIC3_GPIO_B_SLEEP_MASK(_b)      IPAQ_ASIC3_GPIO( _b, u16, B, SleepMask )
-+#define IPAQ_ASIC3_GPIO_B_SLEEP_OUT(_b)       IPAQ_ASIC3_GPIO( _b, u16, B, SleepOut )
-+#define IPAQ_ASIC3_GPIO_B_BATT_FAULT_OUT(_b)  IPAQ_ASIC3_GPIO( _b, u16, B, BattFaultOut )
-+#define IPAQ_ASIC3_GPIO_B_INT_STATUS(_b)      IPAQ_ASIC3_GPIO( _b, u16, B, IntStatus )
-+#define IPAQ_ASIC3_GPIO_B_ALT_FUNCTION(_b)    IPAQ_ASIC3_GPIO( _b, u16, B, AltFunction )
-+#define IPAQ_ASIC3_GPIO_B_SLEEP_CONF(_b)      IPAQ_ASIC3_GPIO( _b, u16, B, SleepConf )
-+#define IPAQ_ASIC3_GPIO_B_STATUS(_b)          IPAQ_ASIC3_GPIO( _b, u16, B, Status )
-+
-+#define IPAQ_ASIC3_GPIO_C_MASK(_b)            IPAQ_ASIC3_GPIO( _b, u16, C, Mask )
-+#define IPAQ_ASIC3_GPIO_C_DIR(_b)             IPAQ_ASIC3_GPIO( _b, u16, C, Direction )
-+#define IPAQ_ASIC3_GPIO_C_OUT(_b)             IPAQ_ASIC3_GPIO( _b, u16, C, Out )
-+#define IPAQ_ASIC3_GPIO_C_LEVELTRI(_b)        IPAQ_ASIC3_GPIO( _b, u16, C, TriggerType )
-+#define IPAQ_ASIC3_GPIO_C_RISING(_b)          IPAQ_ASIC3_GPIO( _b, u16, C, EdgeTrigger )
-+#define IPAQ_ASIC3_GPIO_C_LEVEL(_b)           IPAQ_ASIC3_GPIO( _b, u16, C, LevelTrigger )
-+#define IPAQ_ASIC3_GPIO_C_SLEEP_MASK(_b)      IPAQ_ASIC3_GPIO( _b, u16, C, SleepMask )
-+#define IPAQ_ASIC3_GPIO_C_SLEEP_OUT(_b)       IPAQ_ASIC3_GPIO( _b, u16, C, SleepOut )
-+#define IPAQ_ASIC3_GPIO_C_BATT_FAULT_OUT(_b)  IPAQ_ASIC3_GPIO( _b, u16, C, BattFaultOut )
-+#define IPAQ_ASIC3_GPIO_C_INT_STATUS(_b)      IPAQ_ASIC3_GPIO( _b, u16, C, IntStatus )
-+#define IPAQ_ASIC3_GPIO_C_ALT_FUNCTION(_b)    IPAQ_ASIC3_GPIO( _b, u16, C, AltFunction )
-+#define IPAQ_ASIC3_GPIO_C_SLEEP_CONF(_b)      IPAQ_ASIC3_GPIO( _b, u16, C, SleepConf )
-+#define IPAQ_ASIC3_GPIO_C_STATUS(_b)          IPAQ_ASIC3_GPIO( _b, u16, C, Status )
-+
-+#define IPAQ_ASIC3_GPIO_D_MASK(_b)            IPAQ_ASIC3_GPIO( _b, u16, D, Mask )
-+#define IPAQ_ASIC3_GPIO_D_DIR(_b)             IPAQ_ASIC3_GPIO( _b, u16, D, Direction )
-+#define IPAQ_ASIC3_GPIO_D_OUT(_b)             IPAQ_ASIC3_GPIO( _b, u16, D, Out )
-+#define IPAQ_ASIC3_GPIO_D_LEVELTRI(_b)        IPAQ_ASIC3_GPIO( _b, u16, D, TriggerType )
-+#define IPAQ_ASIC3_GPIO_D_RISING(_b)          IPAQ_ASIC3_GPIO( _b, u16, D, EdgeTrigger )
-+#define IPAQ_ASIC3_GPIO_D_LEVEL(_b)           IPAQ_ASIC3_GPIO( _b, u16, D, LevelTrigger )
-+#define IPAQ_ASIC3_GPIO_D_SLEEP_MASK(_b)      IPAQ_ASIC3_GPIO( _b, u16, D, SleepMask )
-+#define IPAQ_ASIC3_GPIO_D_SLEEP_OUT(_b)       IPAQ_ASIC3_GPIO( _b, u16, D, SleepOut )
-+#define IPAQ_ASIC3_GPIO_D_BATT_FAULT_OUT(_b)  IPAQ_ASIC3_GPIO( _b, u16, D, BattFaultOut )
-+#define IPAQ_ASIC3_GPIO_D_INT_STATUS(_b)      IPAQ_ASIC3_GPIO( _b, u16, D, IntStatus )
-+#define IPAQ_ASIC3_GPIO_D_ALT_FUNCTION(_b)    IPAQ_ASIC3_GPIO( _b, u16, D, AltFunction )
-+#define IPAQ_ASIC3_GPIO_D_SLEEP_CONF(_b)      IPAQ_ASIC3_GPIO( _b, u16, D, SleepConf )
-+#define IPAQ_ASIC3_GPIO_D_STATUS(_b)          IPAQ_ASIC3_GPIO( _b, u16, D, Status )
-+
-+#define _IPAQ_ASIC3_SPI_Base		      0x0400
-+#define _IPAQ_ASIC3_SPI_Control               0x0000
-+#define _IPAQ_ASIC3_SPI_TxData                0x0004
-+#define _IPAQ_ASIC3_SPI_RxData                0x0008
-+#define _IPAQ_ASIC3_SPI_Int                   0x000c
-+#define _IPAQ_ASIC3_SPI_Status                0x0010
-+
-+#define IPAQ_ASIC3_SPI_Control(_b)            IPAQ_ASIC3( _b, u16, SPI, Control )
-+#define IPAQ_ASIC3_SPI_TxData(_b)             IPAQ_ASIC3( _b, u16, SPI, TxData )
-+#define IPAQ_ASIC3_SPI_RxData(_b)             IPAQ_ASIC3( _b, u16, SPI, RxData )
-+#define IPAQ_ASIC3_SPI_Int(_b)                IPAQ_ASIC3( _b, u16, SPI, Int )
-+#define IPAQ_ASIC3_SPI_Status(_b)             IPAQ_ASIC3( _b, u16, SPI, Status )
-+
-+#define SPI_CONTROL_SPR(clk)      ((clk) & 0x0f)  /* Clock rate */
-+
-+#define _IPAQ_ASIC3_PWM_0_Base                0x0500
-+#define _IPAQ_ASIC3_PWM_1_Base                0x0600
-+#define _IPAQ_ASIC3_PWM_TimeBase              0x0000
-+#define _IPAQ_ASIC3_PWM_PeriodTime            0x0004
-+#define _IPAQ_ASIC3_PWM_DutyTime              0x0008
-+
-+#define IPAQ_ASIC3_PWM_TimeBase(_b, x)        IPAQ_ASIC3_N( _b, u16, PWM, x, TimeBase )
-+#define IPAQ_ASIC3_PWM_PeriodTime(_b, x)      IPAQ_ASIC3_N( _b, u16, PWM, x, PeriodTime )
-+#define IPAQ_ASIC3_PWM_DutyTime(_b, x)        IPAQ_ASIC3_N( _b, u16, PWM, x, DutyTime )
-+
-+#define PWM_TIMEBASE_VALUE(x)    ((x)&0xf)   /* Low 4 bits sets time base */
-+#define PWM_TIMEBASE_ENABLE     (1 << 4)   /* Enable clock */
-+
-+#define _IPAQ_ASIC3_LED_0_Base                0x0700
-+#define _IPAQ_ASIC3_LED_1_Base                0x0800
-+#define _IPAQ_ASIC3_LED_2_Base 		      0x0900
-+#define _IPAQ_ASIC3_LED_TimeBase              0x0000    /* R/W  7 bits */
-+#define _IPAQ_ASIC3_LED_PeriodTime            0x0004    /* R/W 12 bits */
-+#define _IPAQ_ASIC3_LED_DutyTime              0x0008    /* R/W 12 bits */
-+#define _IPAQ_ASIC3_LED_AutoStopCount         0x000c    /* R/W 16 bits */
-+
-+#define IPAQ_ASIC3_LED_TimeBase(_b, x)         IPAQ_ASIC3_N( _b,  u8, LED, x, TimeBase )
-+#define IPAQ_ASIC3_LED_PeriodTime(_b, x)       IPAQ_ASIC3_N( _b, u16, LED, x, PeriodTime )
-+#define IPAQ_ASIC3_LED_DutyTime(_b, x)         IPAQ_ASIC3_N( _b, u16, LED, x, DutyTime )
-+#define IPAQ_ASIC3_LED_AutoStopCount(_b, x)    IPAQ_ASIC3_N( _b, u16, LED, x, AutoStopCount )
-+
-+/* LED TimeBase bits - match ASIC2 */
-+#define LED_TBS		0x0f		/* Low 4 bits sets time base, max = 13		*/
-+					/* Note: max = 5 on hx4700			*/
-+					/* 0: maximum time base				*/
-+					/* 1: maximum time base / 2			*/
-+					/* n: maximum time base / 2^n			*/
-+
-+#define LED_EN		(1 << 4)	/* LED ON/OFF 0:off, 1:on			*/
-+#define LED_AUTOSTOP	(1 << 5)	/* LED ON/OFF auto stop set 0:disable, 1:enable */
-+#define LED_ALWAYS	(1 << 6)	/* LED Interrupt Mask 0:No mask, 1:mask		*/
-+
-+#define _IPAQ_ASIC3_CLOCK_Base		0x0A00
-+#define _IPAQ_ASIC3_CLOCK_CDEX           0x00
-+#define _IPAQ_ASIC3_CLOCK_SEL            0x04
-+
-+#define IPAQ_ASIC3_CLOCK_CDEX(_b)         IPAQ_ASIC3( _b, u16, CLOCK, CDEX )
-+#define IPAQ_ASIC3_CLOCK_SEL(_b)          IPAQ_ASIC3( _b, u16, CLOCK, SEL )
-+
-+#define CLOCK_CDEX_SOURCE       (1 << 0)  /* 2 bits */
-+#define CLOCK_CDEX_SOURCE0      (1 << 0)
-+#define CLOCK_CDEX_SOURCE1      (1 << 1)
-+#define CLOCK_CDEX_SPI          (1 << 2)
-+#define CLOCK_CDEX_OWM          (1 << 3)
-+#define CLOCK_CDEX_PWM0         (1 << 4)
-+#define CLOCK_CDEX_PWM1         (1 << 5)
-+#define CLOCK_CDEX_LED0         (1 << 6)
-+#define CLOCK_CDEX_LED1         (1 << 7)
-+#define CLOCK_CDEX_LED2         (1 << 8)
-+
-+#define CLOCK_CDEX_SD_HOST      (1 << 9)   /* R/W: SD host clock source 24.576M/12.288M */
-+#define CLOCK_CDEX_SD_BUS       (1 << 10)  /* R/W: SD bus clock source control 24.576M/12.288M */
-+#define CLOCK_CDEX_SMBUS        (1 << 11)
-+#define CLOCK_CDEX_CONTROL_CX   (1 << 12)
-+
-+#define CLOCK_CDEX_EX0          (1 << 13)  /* R/W: 32.768 kHz crystal */
-+#define CLOCK_CDEX_EX1          (1 << 14)  /* R/W: 24.576 MHz crystal */
-+
-+#define CLOCK_SEL_SD_HCLK_SEL   (1 << 0)   /* R/W: SDIO host clock select  -  1: 24.576 Mhz, 0: 12.288 MHz */
-+#define CLOCK_SEL_SD_BCLK_SEL   (1 << 1)   /* R/W: SDIO bus clock select -  1: 24.576 MHz, 0: 12.288 MHz */
-+#define CLOCK_SEL_CX            (1 << 2)   /* R/W: INT clock source control (32.768 kHz) */
-+
-+
-+#define _IPAQ_ASIC3_INTR_Base		0x0B00
-+
-+#define _IPAQ_ASIC3_INTR_IntMask       0x00  /* Interrupt mask control */
-+#define _IPAQ_ASIC3_INTR_PIntStat      0x04  /* Peripheral interrupt status */
-+#define _IPAQ_ASIC3_INTR_IntCPS        0x08  /* Interrupt timer clock pre-scale */
-+#define _IPAQ_ASIC3_INTR_IntTBS        0x0c  /* Interrupt timer set */
-+
-+#define IPAQ_ASIC3_INTR_IntMask(_b)       IPAQ_ASIC3( _b, u8, INTR, IntMask )
-+#define IPAQ_ASIC3_INTR_PIntStat(_b)      IPAQ_ASIC3( _b, u8, INTR, PIntStat )
-+#define IPAQ_ASIC3_INTR_IntCPS(_b)        IPAQ_ASIC3( _b, u8, INTR, IntCPS )
-+#define IPAQ_ASIC3_INTR_IntTBS(_b)        IPAQ_ASIC3( _b, u16, INTR, IntTBS )
-+
-+#define ASIC3_INTMASK_GINTMASK    (1 << 0)  /* Global interrupt mask 1:enable */
-+#define ASIC3_INTMASK_GINTEL      (1 << 1)  /* 1: rising edge, 0: hi level */
-+#define ASIC3_INTMASK_MASK0       (1 << 2)
-+#define ASIC3_INTMASK_MASK1       (1 << 3)
-+#define ASIC3_INTMASK_MASK2       (1 << 4)
-+#define ASIC3_INTMASK_MASK3       (1 << 5)
-+#define ASIC3_INTMASK_MASK4       (1 << 6)
-+#define ASIC3_INTMASK_MASK5       (1 << 7)
-+
-+#define ASIC3_INTR_PERIPHERAL_A   (1 << 0)
-+#define ASIC3_INTR_PERIPHERAL_B   (1 << 1)
-+#define ASIC3_INTR_PERIPHERAL_C   (1 << 2)
-+#define ASIC3_INTR_PERIPHERAL_D   (1 << 3)
-+#define ASIC3_INTR_LED0           (1 << 4)
-+#define ASIC3_INTR_LED1           (1 << 5)
-+#define ASIC3_INTR_LED2           (1 << 6)
-+#define ASIC3_INTR_SPI            (1 << 7)
-+#define ASIC3_INTR_SMBUS          (1 << 8)
-+#define ASIC3_INTR_OWM            (1 << 9)
-+
-+#define ASIC3_INTR_CPS(x)         ((x)&0x0f)    /* 4 bits, max 14 */
-+#define ASIC3_INTR_CPS_SET        ( 1 << 4 )    /* Time base enable */
-+
-+
-+/* Basic control of the SD ASIC */
-+#define _IPAQ_ASIC3_SDHWCTRL_Base	0x0E00
-+
-+#define _IPAQ_ASIC3_SDHWCTRL_SDConf    0x00
-+#define IPAQ_ASIC3_SDHWCTRL_SDConf(_b)    IPAQ_ASIC3( _b, u8, SDHWCTRL, SDConf )
-+
-+#define ASIC3_SDHWCTRL_SUSPEND    (1 << 0)  /* 1=suspend all SD operations */
-+#define ASIC3_SDHWCTRL_CLKSEL     (1 << 1)  /* 1=SDICK, 0=HCLK */
-+#define ASIC3_SDHWCTRL_PCLR       (1 << 2)  /* All registers of SDIO cleared */
-+#define ASIC3_SDHWCTRL_LEVCD      (1 << 3)  /* Level of SD card detection: 1:high, 0:low */
-+#define ASIC3_SDHWCTRL_LEVWP      (1 << 4)  /* Level of SD card write protection: 1=low, 0=high */
-+#define ASIC3_SDHWCTRL_SDLED      (1 << 5)  /* SD card LED signal 1=enable, 0=disable */
-+#define ASIC3_SDHWCTRL_SDPWR      (1 << 6)  /* SD card power supply control 1=enable */
-+
-+
-+/* This is a pointer to an array of 12 u32 values - but only the lower 2 bytes matter */
-+/* Use it as "IPAQ_ASIC3_HWPROTECT_ARRAY[x]" */
-+
-+#define _IPAQ_ASIC3_HWPROTECT_Base	0x1000
-+#define IPAQ_ASIC3_HWPROTECT_ARRAY  ((volatile u32*)(_IPAQ_ASIC3_Base + _IPAQ_ASIC3_HWPROTECT_Base))
-+#define HWPROTECT_ARRAY_LEN 12
-+#define HWPROTECT_ARRAY_VALUES {0x4854,0x432d,0x5344,0x494f,0x2050,0x2f4e,0x3a33,0x3048,0x3830,0x3032,0x382d,0x3030}
-+
-+
-+#define _IPAQ_ASIC3_EXTCF_Base		0x1100
-+
-+#define _IPAQ_ASIC3_EXTCF_Select         0x00
-+#define _IPAQ_ASIC3_EXTCF_Reset          0x04
-+
-+#define IPAQ_ASIC3_EXTCF_Select(_b)    IPAQ_ASIC3( _b, u16, EXTCF, Select )
-+#define IPAQ_ASIC3_EXTCF_Reset(_b)     IPAQ_ASIC3( _b, u16, EXTCF, Reset )
-+
-+#define ASIC3_EXTCF_SMOD0	         (1 << 0)  /* slot number of mode 0 */
-+#define ASIC3_EXTCF_SMOD1	         (1 << 1)  /* slot number of mode 1 */
-+#define ASIC3_EXTCF_SMOD2	         (1 << 2)  /* slot number of mode 2 */
-+#define ASIC3_EXTCF_OWM_EN	         (1 << 4)  /* enable onewire module */
-+#define ASIC3_EXTCF_OWM_SMB	         (1 << 5)  /* OWM bus selection */
-+#define ASIC3_EXTCF_OWM_RESET            (1 << 6)  /* undocumented, used by OWM and CF */
-+#define ASIC3_EXTCF_CF0_SLEEP_MODE       (1 << 7)  /* CF0 sleep state control */
-+#define ASIC3_EXTCF_CF1_SLEEP_MODE       (1 << 8)  /* CF1 sleep state control */
-+#define ASIC3_EXTCF_CF0_PWAIT_EN         (1 << 10)  /* CF0 PWAIT_n control */
-+#define ASIC3_EXTCF_CF1_PWAIT_EN         (1 << 11)  /* CF1 PWAIT_n control */
-+#define ASIC3_EXTCF_CF0_BUF_EN           (1 << 12)  /* CF0 buffer control */
-+#define ASIC3_EXTCF_CF1_BUF_EN           (1 << 13)  /* CF1 buffer control */
-+#define ASIC3_EXTCF_SD_MEM_ENABLE        (1 << 14)
-+#define ASIC3_EXTCF_CF_SLEEP             (1 << 15)  /* CF sleep mode control */
-+
-+/*****************************************************************************
-+ *  The Onewire interface registers
-+ *
-+ *  OWM_CMD
-+ *  OWM_DAT
-+ *  OWM_INTR
-+ *  OWM_INTEN
-+ *  OWM_CLKDIV
-+ *
-+ *****************************************************************************/
-+
-+#define _IPAQ_ASIC3_OWM_Base		0xC00
-+
-+#define _IPAQ_ASIC3_OWM_CMD         0x00
-+#define _IPAQ_ASIC3_OWM_DAT         0x04
-+#define _IPAQ_ASIC3_OWM_INTR        0x08
-+#define _IPAQ_ASIC3_OWM_INTEN       0x0C
-+#define _IPAQ_ASIC3_OWM_CLKDIV      0x10
-+
-+#define ASIC3_OWM_CMD_ONEWR         (1 << 0)
-+#define ASIC3_OWM_CMD_SRA           (1 << 1)
-+#define ASIC3_OWM_CMD_DQO           (1 << 2)
-+#define ASIC3_OWM_CMD_DQI           (1 << 3)
-+
-+#define ASIC3_OWM_INTR_PD          (1 << 0)
-+#define ASIC3_OWM_INTR_PDR         (1 << 1)
-+#define ASIC3_OWM_INTR_TBE         (1 << 2)
-+#define ASIC3_OWM_INTR_TEMP        (1 << 3)
-+#define ASIC3_OWM_INTR_RBF         (1 << 4)
-+
-+#define ASIC3_OWM_INTEN_EPD        (1 << 0)
-+#define ASIC3_OWM_INTEN_IAS        (1 << 1)
-+#define ASIC3_OWM_INTEN_ETBE       (1 << 2)
-+#define ASIC3_OWM_INTEN_ETMT       (1 << 3)
-+#define ASIC3_OWM_INTEN_ERBF       (1 << 4)
-+
-+#define ASIC3_OWM_CLKDIV_PRE       (3 << 0) /* two bits wide at bit position 0 */
-+#define ASIC3_OWM_CLKDIV_DIV       (7 << 2) /* 3 bits wide at bit position 2 */
-+
-+
-+/*****************************************************************************
-+ *  The SD configuration registers are at a completely different location
-+ *  in memory.  They are divided into three sets of registers:
-+ *
-+ *  SD_CONFIG         Core configuration register
-+ *  SD_CTRL           Control registers for SD operations
-+ *  SDIO_CTRL         Control registers for SDIO operations
-+ *
-+ *****************************************************************************/
-+
-+#define IPAQ_ASIC3_SD_CONFIG(_b, s,x)   \
-+     (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CONFIG_Base + (_IPAQ_ASIC3_SD_CONFIG_ ## x))))
-+
-+#define _IPAQ_ASIC3_SD_CONFIG_Base            0x0400    // Assumes 32 bit addressing
-+
-+#define _IPAQ_ASIC3_SD_CONFIG_Command           0x08   /* R/W: Command */
-+#define _IPAQ_ASIC3_SD_CONFIG_Addr0             0x20   /* [9:31] SD Control Register Base Address */
-+#define _IPAQ_ASIC3_SD_CONFIG_Addr1             0x24   /* [9:31] SD Control Register Base Address */
-+#define _IPAQ_ASIC3_SD_CONFIG_IntPin            0x78   /* R/O: interrupt assigned to pin */
-+#define _IPAQ_ASIC3_SD_CONFIG_ClkStop           0x80   /* Set to 0x1f to clock SD controller, 0 otherwise. */
-+							/* at 0x82 - Gated Clock Control */
-+#define _IPAQ_ASIC3_SD_CONFIG_ClockMode         0x84   /* Control clock of SD controller */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus    0x88   /* R/0: read status of SD pins */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power1       0x90   /* Power1 - manual power control */
-+							/* Power2 is at 0x92 - auto power up after card inserted */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power3       0x94   /* auto power down when card removed */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect   0x98   /* */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Slot         0xA0   /* R/O: define support slot number */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1  0x1E0  /* Could be used for gated clock (don't use) */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk2  0x1E2  /* Could be used for gated clock (don't use) */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable  0x1E8  /* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_Status  0x1EC  /* GPIO Status Reg. */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3  0x1F0  /* Bit 1: double buffer/single buffer */
-+
-+#define IPAQ_ASIC3_SD_CONFIG_Command(_b)           IPAQ_ASIC3_SD_CONFIG(_b, u16, Command )
-+#define IPAQ_ASIC3_SD_CONFIG_Addr0(_b)             IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr0 )
-+#define IPAQ_ASIC3_SD_CONFIG_Addr1(_b)             IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr1 )
-+#define IPAQ_ASIC3_SD_CONFIG_IntPin(_b)            IPAQ_ASIC3_SD_CONFIG(_b, u8, IntPin )
-+#define IPAQ_ASIC3_SD_CONFIG_ClkStop(_b)           IPAQ_ASIC3_SD_CONFIG(_b, u8, ClkStop )
-+#define IPAQ_ASIC3_SD_CONFIG_ClockMode(_b)         IPAQ_ASIC3_SD_CONFIG(_b, u8, ClockMode )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus(_b)    IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_PinStatus )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power1(_b)       IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power1 )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power3(_b)       IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power3 )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect(_b)   IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_CardDetect )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Slot(_b)         IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Slot )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1(_b)  IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk1 )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3(_b)  IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk3 )
-+
-+#define SD_CONFIG_
-+
-+#define SD_CONFIG_COMMAND_MAE                (1<<1)    /* Memory access enable (set to 1 to access SD Controller) */
-+
-+#define SD_CONFIG_CLK_ENABLE_ALL             0x1f
-+
-+#define SD_CONFIG_POWER1_PC_33V              0x0200    /* Set for 3.3 volts */
-+#define SD_CONFIG_POWER1_PC_OFF              0x0000    /* Turn off power */
-+
-+#define SD_CONFIG_CARDDETECTMODE_CLK           ((x)&0x3) /* two bits - number of cycles for card detection */
-+
-+
-+#define _IPAQ_ASIC3_SD_CTRL_Base            0x1000
-+
-+#define IPAQ_ASIC3_SD(_b, s,x)   \
-+     (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CTRL_Base + (_IPAQ_ASIC3_SD_CTRL_ ## x))))
-+
-+#define _IPAQ_ASIC3_SD_CTRL_Cmd                  0x00
-+#define _IPAQ_ASIC3_SD_CTRL_Arg0                 0x08
-+#define _IPAQ_ASIC3_SD_CTRL_Arg1                 0x0C
-+#define _IPAQ_ASIC3_SD_CTRL_StopInternal         0x10
-+#define _IPAQ_ASIC3_SD_CTRL_TransferSectorCount  0x14
-+#define _IPAQ_ASIC3_SD_CTRL_Response0            0x18
-+#define _IPAQ_ASIC3_SD_CTRL_Response1            0x1C
-+#define _IPAQ_ASIC3_SD_CTRL_Response2            0x20
-+#define _IPAQ_ASIC3_SD_CTRL_Response3            0x24
-+#define _IPAQ_ASIC3_SD_CTRL_Response4            0x28
-+#define _IPAQ_ASIC3_SD_CTRL_Response5            0x2C
-+#define _IPAQ_ASIC3_SD_CTRL_Response6            0x30
-+#define _IPAQ_ASIC3_SD_CTRL_Response7            0x34
-+#define _IPAQ_ASIC3_SD_CTRL_CardStatus           0x38
-+#define _IPAQ_ASIC3_SD_CTRL_BufferCtrl           0x3C
-+#define _IPAQ_ASIC3_SD_CTRL_IntMaskCard          0x40
-+#define _IPAQ_ASIC3_SD_CTRL_IntMaskBuffer        0x44
-+#define _IPAQ_ASIC3_SD_CTRL_CardClockCtrl        0x48
-+#define _IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen   0x4C
-+#define _IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup   0x50
-+#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus0         0x58
-+#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus1         0x5C
-+#define _IPAQ_ASIC3_SD_CTRL_DataPort             0x60
-+#define _IPAQ_ASIC3_SD_CTRL_TransactionCtrl      0x68
-+#define _IPAQ_ASIC3_SD_CTRL_SoftwareReset        0x1C0
-+
-+#define IPAQ_ASIC3_SD_CTRL_Cmd(_b)                  IPAQ_ASIC3_SD( _b, u16, Cmd )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Arg0(_b)                 IPAQ_ASIC3_SD( _b, u16, Arg0 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Arg1(_b)                 IPAQ_ASIC3_SD( _b, u16, Arg1 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_StopInternal(_b)         IPAQ_ASIC3_SD( _b, u16, StopInternal )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_TransferSectorCount(_b)  IPAQ_ASIC3_SD( _b, u16, TransferSectorCount )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response0(_b)            IPAQ_ASIC3_SD( _b, u16, Response0 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response1(_b)            IPAQ_ASIC3_SD( _b, u16, Response1 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response2(_b)            IPAQ_ASIC3_SD( _b, u16, Response2 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response3(_b)            IPAQ_ASIC3_SD( _b, u16, Response3 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response4(_b)            IPAQ_ASIC3_SD( _b, u16, Response4 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response5(_b)            IPAQ_ASIC3_SD( _b, u16, Response5 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response6(_b)            IPAQ_ASIC3_SD( _b, u16, Response6 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response7(_b)            IPAQ_ASIC3_SD( _b, u16, Response7 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_CardStatus(_b)           IPAQ_ASIC3_SD( _b, u16, CardStatus )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_BufferCtrl(_b)           IPAQ_ASIC3_SD( _b, u16, BufferCtrl )   /* and error status*/
-+#define IPAQ_ASIC3_SD_CTRL_IntMaskCard(_b)          IPAQ_ASIC3_SD( _b, u16, IntMaskCard )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_IntMaskBuffer(_b)        IPAQ_ASIC3_SD( _b, u16, IntMaskBuffer )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_CardClockCtrl(_b)        IPAQ_ASIC3_SD( _b, u16, CardClockCtrl )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen(_b)   IPAQ_ASIC3_SD( _b, u16, MemCardXferDataLen )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup(_b)   IPAQ_ASIC3_SD( _b, u16, MemCardOptionSetup )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_ErrorStatus0(_b)         IPAQ_ASIC3_SD( _b, u16, ErrorStatus0 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_ErrorStatus1(_b)         IPAQ_ASIC3_SD( _b, u16, ErrorStatus1 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_DataPort(_b)             IPAQ_ASIC3_SD( _b, u16, DataPort )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_TransactionCtrl(_b)      IPAQ_ASIC3_SD( _b, u16, TransactionCtrl )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_SoftwareReset(_b)        IPAQ_ASIC3_SD( _b, u16, SoftwareReset )   /* */
-+
-+#define SD_CTRL_SOFTWARE_RESET_CLEAR            (1<<0)
-+
-+#define SD_CTRL_TRANSACTIONCONTROL_SET          (1<<8) // 0x0100
-+
-+#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD    (1<<15)// 0x8000
-+#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK   (1<<8) // 0x0100
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512    (1<<7) // 0x0080
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256    (1<<6) // 0x0040
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128    (1<<5) // 0x0020
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64     (1<<4) // 0x0010
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32     (1<<3) // 0x0008
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16     (1<<2) // 0x0004
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8      (1<<1) // 0x0002
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4      (1<<0) // 0x0001
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2      (0<<0) // 0x0000
-+
-+#define MEM_CARD_OPTION_REQUIRED                   0x000e
-+#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x)   (((x)&0x0f)<<4)      /* Four bits */
-+#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT      (1<<14) // 0x4000
-+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1           (1<<15) // 0x8000
-+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4           (0<<15) //~0x8000
-+
-+#define SD_CTRL_COMMAND_INDEX(x)                   ((x)&0x3f)           /* 0=CMD0, 1=CMD1, ..., 63=CMD63 */
-+#define SD_CTRL_COMMAND_TYPE_CMD                   (0 << 6)
-+#define SD_CTRL_COMMAND_TYPE_ACMD                  (1 << 6)
-+#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION        (2 << 6)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL       (0 << 8)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1       (4 << 8)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B      (5 << 8)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2       (6 << 8)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3       (7 << 8)
-+#define SD_CTRL_COMMAND_DATA_PRESENT               (1 << 11)
-+#define SD_CTRL_COMMAND_TRANSFER_READ              (1 << 12)
-+#define SD_CTRL_COMMAND_TRANSFER_WRITE             (0 << 12)
-+#define SD_CTRL_COMMAND_MULTI_BLOCK                (1 << 13)
-+#define SD_CTRL_COMMAND_SECURITY_CMD               (1 << 14)
-+
-+#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12         (1 << 0)
-+#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12     (1 << 8)
-+
-+#define SD_CTRL_CARDSTATUS_RESPONSE_END            (1 << 0)
-+#define SD_CTRL_CARDSTATUS_RW_END                  (1 << 2)
-+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0          (1 << 3)
-+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0         (1 << 4)
-+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0  (1 << 5)
-+#define SD_CTRL_CARDSTATUS_WRITE_PROTECT           (1 << 7)
-+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3          (1 << 8)
-+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3         (1 << 9)
-+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3  (1 << 10)
-+
-+#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR       (1 << 0) // 0x0001
-+#define SD_CTRL_BUFFERSTATUS_CRC_ERROR             (1 << 1) // 0x0002
-+#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR    (1 << 2) // 0x0004
-+#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT          (1 << 3) // 0x0008
-+#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW       (1 << 4) // 0x0010
-+#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW      (1 << 5) // 0x0020
-+#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT           (1 << 6) // 0x0040
-+#define SD_CTRL_BUFFERSTATUS_UNK7                  (1 << 7) // 0x0080
-+#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE    (1 << 8) // 0x0100
-+#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE   (1 << 9) // 0x0200
-+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION      (1 << 13)// 0x2000
-+#define SD_CTRL_BUFFERSTATUS_CMD_BUSY              (1 << 14)// 0x4000
-+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS        (1 << 15)// 0x8000
-+
-+#define SD_CTRL_INTMASKCARD_RESPONSE_END           (1 << 0) // 0x0001
-+#define SD_CTRL_INTMASKCARD_RW_END                 (1 << 2) // 0x0004
-+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0         (1 << 3) // 0x0008
-+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0        (1 << 4) // 0x0010
-+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5) // 0x0020
-+#define SD_CTRL_INTMASKCARD_UNK6                   (1 << 6) // 0x0040
-+#define SD_CTRL_INTMASKCARD_WRITE_PROTECT          (1 << 7) // 0x0080
-+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3         (1 << 8) // 0x0100
-+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3        (1 << 9) // 0x0200
-+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)// 0x0400
-+
-+#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR      (1 << 0) // 0x0001
-+#define SD_CTRL_INTMASKBUFFER_CRC_ERROR            (1 << 1) // 0x0002
-+#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR   (1 << 2) // 0x0004
-+#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT         (1 << 3) // 0x0008
-+#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW      (1 << 4) // 0x0010
-+#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW     (1 << 5) // 0x0020
-+#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT          (1 << 6) // 0x0040
-+#define SD_CTRL_INTMASKBUFFER_UNK7                 (1 << 7) // 0x0080
-+#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE   (1 << 8) // 0x0100
-+#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE  (1 << 9) // 0x0200
-+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION     (1 << 13)// 0x2000
-+#define SD_CTRL_INTMASKBUFFER_CMD_BUSY             (1 << 14)// 0x4000
-+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS       (1 << 15)// 0x8000
-+
-+#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR                   (1 << 0) // 0x0001
-+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2) // 0x0004
-+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12     (1 << 3) // 0x0008
-+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA          (1 << 4) // 0x0010
-+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS   (1 << 5) // 0x0020
-+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12     (1 << 8) // 0x0100
-+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12         (1 << 9) // 0x0200
-+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA              (1 << 10)// 0x0400
-+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD              (1 << 11)// 0x0800
-+
-+#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE                      (1 << 0) // 0x0001
-+#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA                    (1 << 4) // 0x0010
-+#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS                   (1 << 5) // 0x0020
-+#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY                     (1 << 6) // 0x0040
-+
-+#define _IPAQ_ASIC3_SDIO_CTRL_Base          0x1200
-+
-+#define IPAQ_ASIC3_SDIO(_b, s,x)   \
-+     (*((volatile s *) ((_b) + _IPAQ_ASIC3_SDIO_CTRL_Base + (_IPAQ_ASIC3_SDIO_CTRL_ ## x))))
-+
-+#define _IPAQ_ASIC3_SDIO_CTRL_Cmd                  0x00
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardPortSel          0x04
-+#define _IPAQ_ASIC3_SDIO_CTRL_Arg0                 0x08
-+#define _IPAQ_ASIC3_SDIO_CTRL_Arg1                 0x0C
-+#define _IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount   0x14
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response0            0x18
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response1            0x1C
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response2            0x20
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response3            0x24
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response4            0x28
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response5            0x2C
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response6            0x30
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response7            0x34
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardStatus           0x38
-+#define _IPAQ_ASIC3_SDIO_CTRL_BufferCtrl           0x3C
-+#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskCard          0x40
-+#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer        0x44
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen      0x4C
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup      0x50
-+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0         0x54
-+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1         0x58
-+#define _IPAQ_ASIC3_SDIO_CTRL_DataPort             0x60
-+#define _IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl      0x68
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl          0x6C
-+#define _IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl       0x70
-+#define _IPAQ_ASIC3_SDIO_CTRL_HostInformation      0x74
-+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl            0x78
-+#define _IPAQ_ASIC3_SDIO_CTRL_LEDCtrl              0x7C
-+#define _IPAQ_ASIC3_SDIO_CTRL_SoftwareReset        0x1C0
-+
-+#define IPAQ_ASIC3_SDIO_CTRL_Cmd(_b)                  IPAQ_ASIC3_SDIO( _b, u16, Cmd )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardPortSel(_b)          IPAQ_ASIC3_SDIO( _b, u16, CardPortSel )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Arg0(_b)                 IPAQ_ASIC3_SDIO( _b, u16, Arg0 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Arg1(_b)                 IPAQ_ASIC3_SDIO( _b, u16, Arg1 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount(_b)   IPAQ_ASIC3_SDIO( _b, u16, TransferBlockCount )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response0(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response0 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response1(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response1 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response2(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response2 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response3(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response3 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response4(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response4 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response5(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response5 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response6(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response6 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response7(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response7 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardStatus(_b)           IPAQ_ASIC3_SDIO( _b, u16, CardStatus )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_BufferCtrl(_b)           IPAQ_ASIC3_SDIO( _b, u16, BufferCtrl )   /* and error status*/
-+#define IPAQ_ASIC3_SDIO_CTRL_IntMaskCard(_b)          IPAQ_ASIC3_SDIO( _b, u16, IntMaskCard )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer(_b)        IPAQ_ASIC3_SDIO( _b, u16, IntMaskBuffer )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen(_b)      IPAQ_ASIC3_SDIO( _b, u16, CardXferDataLen )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup(_b)      IPAQ_ASIC3_SDIO( _b, u16, CardOptionSetup )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0(_b)         IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus0 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1(_b)         IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus1 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_DataPort(_b)             IPAQ_ASIC3_SDIO( _b, u16, DataPort )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl(_b)      IPAQ_ASIC3_SDIO( _b, u16, TransactionCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl(_b)          IPAQ_ASIC3_SDIO( _b, u16, CardIntCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl(_b)       IPAQ_ASIC3_SDIO( _b, u16, ClocknWaitCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_HostInformation(_b)      IPAQ_ASIC3_SDIO( _b, u16, HostInformation )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl(_b)            IPAQ_ASIC3_SDIO( _b, u16, ErrorCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_LEDCtrl(_b)              IPAQ_ASIC3_SDIO( _b, u16, LEDCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_SoftwareReset(_b)        IPAQ_ASIC3_SDIO( _b, u16, SoftwareReset )   /* */
-+
-+#define IPAQ_ASIC3_MAP_SIZE	     0x2000
-+
-+#endif
-Index: linux-2.6.24/include/linux/gpiodev.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/linux/gpiodev.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,44 @@
-+#ifndef __GPIODEV_H
-+#define __GPIODEV_H
-+
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <asm/gpio.h>
-+
-+/* Interface */
-+
-+/* This structure must be first member of device platform_data structure
-+   of a device which provides gpiodev interface. All method pointers
-+   must be non-NULL, so stubs must be used for non-implemented ones. */
-+struct gpiodev_ops {
-+        int (*get)(struct device *this, unsigned gpio_no);
-+        void (*set)(struct device *this, unsigned gpio_no, int val);
-+        int (*to_irq)(struct device *this, unsigned gpio_no);
-+};
-+
-+/* Generalized GPIO structure */
-+
-+struct gpio {
-+	struct device *gpio_dev;
-+	unsigned gpio_no;
-+};
-+
-+/* API functions */
-+
-+static inline int gpiodev_get_value(struct gpio *gpio)
-+{
-+	struct gpiodev_ops *ops = gpio->gpio_dev->platform_data;
-+	return ops->get(gpio->gpio_dev, gpio->gpio_no);
-+}
-+static inline void gpiodev_set_value(struct gpio *gpio, int val)
-+{
-+	struct gpiodev_ops *ops = gpio->gpio_dev->platform_data;
-+	ops->set(gpio->gpio_dev, gpio->gpio_no, val);
-+}
-+static inline int gpiodev_to_irq(struct gpio *gpio)
-+{
-+	struct gpiodev_ops *ops = gpio->gpio_dev->platform_data;
-+	return ops->to_irq(gpio->gpio_dev, gpio->gpio_no);
-+}
-+
-+#endif /* __GPIODEV_H */
-Index: linux-2.6.24/include/linux/input_pda.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/linux/input_pda.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,47 @@
-+#ifndef _INPUT_PDA_H
-+#define _INPUT_PDA_H
-+
-+/*
-+ * This is temporary virtual button key codes map
-+ * for keyboardless handheld computers.
-+ * Its purpose is to provide map common to all devices
-+ * and known to work with current software and its bugs
-+ * and misfeatures. Once issues with the software are
-+ * solved, codes from input.h will be used directly
-+ * (missing key definitions will be added).
-+ */
-+
-+/* Some directly usable keycodes:
-+KEY_POWER - Power/suspend button
-+KEY_ENTER - Enter/Action/Central button on joypad
-+KEY_UP
-+KEY_DOWN
-+KEY_LEFT
-+KEY_RIGHT
-+*/
-+
-+/* XXX Instead of using any values in include/linux/input.h, we have to use
-+       use values < 128 due to some munging that kdrive does to get keystrokes.
-+       When kdrive gets its key events from evdev instead of the console,
-+       we should be able to switch to using input.h values and get rid of
-+       xmodmap. */
-+
-+#define _KEY_APP1	KEY_F9		// xmodmap sees 67 + 8 = 75
-+#define _KEY_APP2	KEY_F10		// xmodmap 76
-+#define _KEY_APP3	KEY_F11		// xmodmap 95
-+#define _KEY_APP4	KEY_F12		// xmodmap 96
-+
-+#define _KEY_RECORD	KEY_RO
-+
-+/* It is highly recommended to use exactly 4 codes above for
-+   4 buttons the device has. This will ensure that console and
-+   framebuffer applications (e.g. games) will work ok on all
-+   devices. If you'd like more distinguishable names, following
-+   convenience defines are provided, suiting many devices. */
-+
-+#define _KEY_CALENDAR	_KEY_APP1
-+#define _KEY_CONTACTS	_KEY_APP2
-+#define _KEY_MAIL	_KEY_APP3
-+#define _KEY_HOMEPAGE	_KEY_APP4
-+
-+#endif
-Index: linux-2.6.24/include/linux/soc/asic3_base.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/linux/soc/asic3_base.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,104 @@
-+#include <asm/types.h>
-+#include <linux/gpiodev.h>
-+
-+/* Private API - for ASIC3 devices internal use only */
-+#define HDR_IPAQ_ASIC3_ACTION(ACTION,action,fn,FN)                  \
-+u32  asic3_get_gpio_ ## action ## _ ## fn (struct device *dev);      \
-+void asic3_set_gpio_ ## action ## _ ## fn (struct device *dev, u32 bits, u32 val);
-+
-+#define HDR_IPAQ_ASIC3_FN(fn,FN)					\
-+	HDR_IPAQ_ASIC3_ACTION ( MASK,mask,fn,FN)			\
-+	HDR_IPAQ_ASIC3_ACTION ( DIR, dir, fn, FN)			\
-+	HDR_IPAQ_ASIC3_ACTION ( OUT, out, fn, FN)			\
-+	HDR_IPAQ_ASIC3_ACTION ( LEVELTRI, trigtype, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( RISING, rising, fn, FN)			\
-+	HDR_IPAQ_ASIC3_ACTION ( LEVEL, triglevel, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( SLEEP_MASK, sleepmask, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( SLEEP_OUT, sleepout, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( BATT_FAULT_OUT, battfaultout, fn, FN)	\
-+	HDR_IPAQ_ASIC3_ACTION ( INT_STATUS, intstatus, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( ALT_FUNCTION, alt_fn, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( SLEEP_CONF, sleepconf, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( STATUS, status, fn, FN)
-+
-+/* Public API */
-+
-+#define ASIC3_GPIOA_IRQ_BASE	0
-+#define ASIC3_GPIOB_IRQ_BASE	16
-+#define ASIC3_GPIOC_IRQ_BASE	32
-+#define ASIC3_GPIOD_IRQ_BASE	48
-+#define ASIC3_LED0_IRQ		64
-+#define ASIC3_LED1_IRQ		65
-+#define ASIC3_LED2_IRQ		66
-+#define ASIC3_SPI_IRQ		67
-+#define ASIC3_SMBUS_IRQ		68
-+#define ASIC3_OWM_IRQ		69
-+
-+#define ASIC3_NR_GPIO_IRQS	64	/* 16 bits each GPIO A...D banks */
-+#define ASIC3_NR_IRQS		(ASIC3_OWM_IRQ + 1)
-+
-+extern int asic3_irq_base(struct device *dev);
-+
-+extern void asic3_write_register(struct device *dev, unsigned int reg,
-+                                 u32 value);
-+extern u32  asic3_read_register(struct device *dev, unsigned int reg);
-+
-+/* old clock api */
-+extern void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val);
-+extern u32  asic3_get_clock_cdex(struct device *dev);
-+extern void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val);
-+
-+extern void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val);
-+extern void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val);
-+extern void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val);
-+
-+extern void asic3_set_led(struct device *dev, int led_num, int duty_time,
-+                          int cycle_time, int timebase);
-+
-+extern int asic3_register_mmc(struct device *dev);
-+extern int asic3_unregister_mmc(struct device *dev);
-+
-+/* Accessors for GPIO banks */
-+HDR_IPAQ_ASIC3_FN(a, A)
-+HDR_IPAQ_ASIC3_FN(b, B)
-+HDR_IPAQ_ASIC3_FN(c, C)
-+HDR_IPAQ_ASIC3_FN(d, D)
-+
-+#define _IPAQ_ASIC3_GPIO_BANK_A      0
-+#define _IPAQ_ASIC3_GPIO_BANK_B      1
-+#define _IPAQ_ASIC3_GPIO_BANK_C      2
-+#define _IPAQ_ASIC3_GPIO_BANK_D      3
-+
-+#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf))
-+
-+extern int asic3_get_gpio_bit(struct device *dev, int gpio);
-+extern void asic3_set_gpio_bit(struct device *dev, int gpio, int val);
-+extern int asic3_gpio_get_value(struct device *dev, unsigned gpio);
-+extern void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val);
-+
-+
-+struct tmio_mmc_hwconfig;
-+
-+struct asic3_platform_data
-+{
-+	// Must be first member
-+	struct gpiodev_ops gpiodev_ops;
-+
-+	struct {
-+		u32 dir;
-+		u32 init;
-+		u32 sleep_mask;
-+		u32 sleep_out;
-+		u32 batt_fault_out;
-+		u32 sleep_conf;
-+		u32 alt_function;
-+	} gpio_a, gpio_b, gpio_c, gpio_d;
-+
-+	int irq_base;
-+	unsigned int bus_shift;
-+
-+	struct platform_device **child_platform_devs;
-+	int num_child_platform_devs;
-+
-+	struct tmio_mmc_hwconfig *tmio_mmc_hwconfig;
-+};
-Index: linux-2.6.24/include/linux/soc/tmio_mmc.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/linux/soc/tmio_mmc.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,17 @@
-+#include <linux/platform_device.h>
-+
-+#define MMC_CLOCK_DISABLED 0
-+#define MMC_CLOCK_ENABLED  1
-+
-+#define TMIO_WP_ALWAYS_RW ((void*)-1)
-+
-+struct tmio_mmc_hwconfig {
-+	void (*hwinit)(struct platform_device *sdev);
-+	void (*set_mmc_clock)(struct platform_device *sdev, int state);
-+
-+	/* NULL - use ASIC3 signal,
-+	   TMIO_WP_ALWAYS_RW - assume always R/W (e.g. miniSD)
-+	   otherwise - machine-specific handler */
-+	int (*mmc_get_ro)(struct platform_device *pdev);
-+	short address_shift;
-+};
-Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
-===================================================================
---- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h	2008-03-10 16:07:59.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h	2008-03-10 16:09:23.000000000 +0000
-@@ -2058,6 +2058,8 @@
- #define LDCMD_SOFINT	(1 << 22)
- #define LDCMD_EOFINT	(1 << 21)
- 
-+#define LCCR4_13M_PCD_EN        (1<<25)          /* 13M PCD enable */
-+#define LCCR4_PCDDIV            (1<<31)          /* PCD selection */
- 
- #define LCCR5_SOFM1	(1<<0)		/* Start Of Frame Mask for Overlay 1 (channel 1) */
- #define LCCR5_SOFM2	(1<<1)		/* Start Of Frame Mask for Overlay 2 (channel 2) */
-Index: linux-2.6.24/drivers/mmc/host/Makefile
-===================================================================
---- linux-2.6.24.orig/drivers/mmc/host/Makefile	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/drivers/mmc/host/Makefile	2008-03-10 16:09:23.000000000 +0000
-@@ -13,6 +13,7 @@
- obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
- obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
- obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
-+obj-$(CONFIG_MMC_ASIC3)         += asic3_mmc.o
- obj-$(CONFIG_MMC_OMAP)		+= omap.o
- obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
- obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
-Index: linux-2.6.24/drivers/mmc/host/asic3_mmc.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/mmc/host/asic3_mmc.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,900 @@
-+/* Note that this driver can likely be merged into the tmio driver, so
-+ * consider this code temporary.  It works, though.
-+ */
-+/*
-+ *  linux/drivers/mmc/asic3_mmc.c
-+ *
-+ *  Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ *  based on tmio_mmc.c
-+ *      Copyright (C) 2004 Ian Molton
-+ *
-+ *  Refactored to support all ASIC3 devices, 2006 Paul Sokolovsky
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Driver for the SD / SDIO cell found in:
-+ *
-+ * TC6393XB
-+ *
-+ * This driver draws mainly on scattered spec sheets, Reverse engineering
-+ * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
-+ * support).
-+ *
-+ * Supports MMC 1 bit transfers and SD 1 and 4 bit modes.
-+ *
-+ * TODO:
-+ *   Eliminate FIXMEs
-+ *   SDIO support
-+ *   Power management
-+ *   Handle MMC errors (at all)
-+ *
-+ */
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/blkdev.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/mmc/mmc.h>
-+#include <linux/mmc/host.h>
-+#include <linux/mmc/card.h>
-+//#include <linux/mmc/protocol.h>
-+#include <linux/mmc/sd.h>
-+#include <linux/scatterlist.h>
-+//#include <linux/soc-old.h>
-+#include <linux/soc/asic3_base.h>
-+#include <linux/soc/tmio_mmc.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/mach/irq.h>
-+#include <linux/clk.h>
-+#include <asm/mach-types.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include "asic3_mmc.h"
-+
-+struct asic3_mmc_host {
-+    void                    *ctl_base;
-+    struct device           *asic3_dev;       /* asic3 device */
-+    struct tmio_mmc_hwconfig *hwconfig;       /* HW config data/handlers, guaranteed != NULL */
-+    unsigned long           bus_shift;
-+    struct mmc_command      *cmd;
-+    struct mmc_request      *mrq;
-+    struct mmc_data         *data;
-+    struct mmc_host         *mmc;
-+    int                     irq;
-+    unsigned short          clock_for_sd;
-+
-+    /* I/O related stuff */
-+    struct scatterlist      *sg_ptr;
-+    unsigned int            sg_len;
-+    unsigned int            sg_off;
-+};
-+
-+static void
-+mmc_finish_request(struct asic3_mmc_host *host)
-+{
-+    struct mmc_request *mrq = host->mrq;
-+
-+    /* Write something to end the command */
-+    host->mrq  = NULL;
-+    host->cmd  = NULL;
-+    host->data = NULL;
-+
-+    mmc_request_done(host->mmc, mrq);
-+}
-+
-+
-+#define ASIC3_MMC_REG(host, block, reg) (*((volatile u16 *) ((host->ctl_base) + ((_IPAQ_ASIC3_## block ## _Base + _IPAQ_ASIC3_ ## block ## _ ## reg) >> (2 - host->bus_shift))) ))
-+
-+static void
-+mmc_start_command(struct asic3_mmc_host *host, struct mmc_command *cmd)
-+{
-+    struct mmc_data *data = host->data;
-+    int c                 = cmd->opcode;
-+
-+    DBG("Opcode: %d, base: %p\n", cmd->opcode, host->ctl_base);
-+
-+    if(cmd->opcode == MMC_STOP_TRANSMISSION) {
-+        ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12;
-+        cmd->resp[0] = cmd->opcode;
-+        cmd->resp[1] = 0;
-+        cmd->resp[2] = 0;
-+        cmd->resp[3] = 0;
-+        cmd->resp[4] = 0;
-+        return;
-+    }
-+
-+    switch(cmd->flags & 0x1f) {
-+        case MMC_RSP_NONE: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL; break;
-+        case MMC_RSP_R1:   c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1;   break;
-+        case MMC_RSP_R1B:  c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B;  break;
-+        case MMC_RSP_R2:   c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2;   break;
-+        case MMC_RSP_R3:   c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3;   break;
-+        default:
-+            DBG("Unknown response type %d\n", cmd->flags & 0x1f);
-+            break;
-+    }
-+
-+    host->cmd = cmd;
-+
-+    if(cmd->opcode == MMC_APP_CMD) {
-+        c |= APP_CMD;
-+    }
-+    if (cmd->opcode == MMC_GO_IDLE_STATE) {
-+        c |= (3 << 8); /* This was removed from ipaq-asic3.h for some reason */
-+    }
-+    if(data) {
-+        c |= SD_CTRL_COMMAND_DATA_PRESENT;
-+        if(data->blocks > 1) {
-+            ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12;
-+            c |= SD_CTRL_COMMAND_MULTI_BLOCK;
-+        }
-+        if(data->flags & MMC_DATA_READ) {
-+            c |= SD_CTRL_COMMAND_TRANSFER_READ;
-+        }
-+        /* MMC_DATA_WRITE does not require a bit to be set */
-+    }
-+
-+    /* Enable the command and data interrupts */
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~(
-+          SD_CTRL_INTMASKCARD_RESPONSE_END
-+        | SD_CTRL_INTMASKCARD_RW_END
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_0
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_0
-+#if 0
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_3
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_3
-+#endif
-+    );
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = ~(
-+          SD_CTRL_INTMASKBUFFER_UNK7
-+        | SD_CTRL_INTMASKBUFFER_CMD_BUSY
-+#if 0
-+        | SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR
-+        | SD_CTRL_INTMASKBUFFER_CRC_ERROR
-+        | SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR
-+        | SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT
-+        | SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW
-+        | SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW
-+        | SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT
-+        | SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE
-+        | SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE
-+        | SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS
-+#endif
-+    );
-+
-+    /* Send the command */
-+    ASIC3_MMC_REG(host, SD_CTRL, Arg1) = cmd->arg >> 16;
-+    ASIC3_MMC_REG(host, SD_CTRL, Arg0) = cmd->arg & 0xffff;
-+    ASIC3_MMC_REG(host, SD_CTRL, Cmd) = c;
-+}
-+
-+/* This chip always returns (at least?) as much data as you ask for.  I'm
-+ * unsure what happens if you ask for less than a block. This should be looked
-+ * into to ensure that a funny length read doesnt mess up the controller data
-+ * state machine.
-+ *
-+ * Aric: Statement above may not apply to ASIC3.
-+ *
-+ * FIXME - this chip cannot do 1 and 2 byte data requests in 4 bit mode
-+ *
-+ * Aric: Statement above may not apply to ASIC3.
-+ */
-+
-+static struct tasklet_struct mmc_data_read_tasklet;
-+
-+static void
-+mmc_data_transfer(unsigned long h)
-+{
-+    struct asic3_mmc_host *host = (struct asic3_mmc_host *)h;
-+    struct mmc_data *data = host->data;
-+    unsigned short *buf;
-+    int count;
-+    /* unsigned long flags; */
-+
-+    if(!data){
-+        printk(KERN_WARNING DRIVER_NAME ": Spurious Data IRQ\n");
-+        return;
-+    }
-+
-+    /* local_irq_save(flags); */
-+    /* buf = kmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */
-+    buf = kmap(host->sg_ptr->page);
-+    buf += host->sg_ptr->offset/2 + host->sg_off/2;
-+
-+    /*
-+     * Ensure we dont read more than one block. The chip will interrupt us
-+     * When the next block is available.
-+     */
-+    count = host->sg_ptr->length - host->sg_off;
-+    if(count > data->blksz) {
-+        count = data->blksz;
-+    }
-+
-+    DBG("count: %08x, page: %p, offset: %08x flags %08x\n",
-+        count, host->sg_ptr->page, host->sg_off, data->flags);
-+
-+    host->sg_off += count;
-+
-+    /* Transfer the data */
-+    if(data->flags & MMC_DATA_READ) {
-+        while(count > 0) {
-+            /* Read two bytes from SD/MMC controller. */
-+            *buf = ASIC3_MMC_REG(host, SD_CTRL, DataPort);
-+            buf++;
-+            count -= 2;
-+        }
-+	//flush_dcache_page(host->sg_ptr->page);
-+    } else {
-+        while(count > 0) {
-+            /* Write two bytes to SD/MMC controller. */
-+            ASIC3_MMC_REG(host, SD_CTRL, DataPort) = *buf;
-+            buf++;
-+            count -= 2;
-+        }
-+    }
-+
-+    /* kunmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */
-+    kunmap(host->sg_ptr->page);
-+    /* local_irq_restore(flags); */
-+    if(host->sg_off == host->sg_ptr->length) {
-+        host->sg_ptr++;
-+        host->sg_off = 0;
-+        --host->sg_len;
-+    }
-+
-+    return;
-+}
-+
-+static void
-+mmc_data_end_irq(struct asic3_mmc_host *host)
-+{
-+    struct mmc_data *data = host->data;
-+
-+    host->data = NULL;
-+
-+    if(!data){
-+        printk(KERN_WARNING DRIVER_NAME ": Spurious data end IRQ\n");
-+        return;
-+    }
-+
-+    if (data->error == MMC_ERR_NONE) {
-+        data->bytes_xfered = data->blocks * data->blksz;
-+    } else {
-+        data->bytes_xfered = 0;
-+    }
-+
-+    DBG("Completed data request\n");
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0;
-+
-+    /* Make sure read enable interrupt and write enable interrupt are disabled */
-+    if(data->flags & MMC_DATA_READ) {
-+        ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE;
-+    } else {
-+        ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE;
-+    }
-+
-+    mmc_finish_request(host);
-+}
-+
-+static void
-+mmc_cmd_irq(struct asic3_mmc_host *host, unsigned int buffer_stat)
-+{
-+    struct mmc_command *cmd = host->cmd;
-+    u8 *buf = (u8 *)cmd->resp;
-+    u16 data;
-+
-+    if(!host->cmd) {
-+        printk(KERN_WARNING DRIVER_NAME ": Spurious CMD irq\n");
-+        return;
-+    }
-+
-+    host->cmd = NULL;
-+    if(cmd->flags & MMC_RSP_PRESENT && cmd->flags & MMC_RSP_136) {
-+        /* R2 */
-+        buf[12] = 0xff;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response0);
-+        buf[13] = data & 0xff;
-+        buf[14] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response1);
-+        buf[15] = data & 0xff;
-+        buf[8] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response2);
-+        buf[9] = data & 0xff;
-+        buf[10] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response3);
-+        buf[11] = data & 0xff;
-+        buf[4] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response4);
-+        buf[5] = data & 0xff;
-+        buf[6] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response5);
-+        buf[7] = data & 0xff;
-+        buf[0] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response6);
-+        buf[1] = data & 0xff;
-+        buf[2] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response7);
-+        buf[3] = data & 0xff;
-+    } else if(cmd->flags & MMC_RSP_PRESENT) {
-+        /* R1, R1B, R3 */
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response0);
-+        buf[0] = data & 0xff;
-+        buf[1] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response1);
-+        buf[2] = data & 0xff;
-+        buf[3] = data >> 8;
-+    }
-+    DBG("Response: %08x %08x %08x %08x\n", cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-+
-+    if(buffer_stat & SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT) {
-+        cmd->error = MMC_ERR_TIMEOUT;
-+    } else if((buffer_stat & SD_CTRL_BUFFERSTATUS_CRC_ERROR) && (cmd->flags & MMC_RSP_CRC)) {
-+        cmd->error = MMC_ERR_BADCRC;
-+    } else if(buffer_stat &
-+                (
-+                      SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS
-+                    | SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR
-+                    | SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR
-+                    | SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW
-+                    | SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW
-+                    | SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT
-+                )
-+    ) {
-+        DBG("Buffer status ERROR 0x%04x - inside check buffer\n", buffer_stat);
-+        DBG("detail0 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0));
-+        DBG("detail1 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1));
-+        cmd->error = MMC_ERR_FAILED;
-+    }
-+
-+    if(cmd->error == MMC_ERR_NONE) {
-+        switch (cmd->opcode) {
-+            case SD_APP_SET_BUS_WIDTH:
-+                if(cmd->arg == SD_BUS_WIDTH_4) {
-+                    host->clock_for_sd = SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD;
-+                    ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) =
-+                              MEM_CARD_OPTION_REQUIRED
-+                            | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14)
-+                            | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT
-+                            | MEM_CARD_OPTION_DATA_XFR_WIDTH_4;
-+                } else {
-+                    host->clock_for_sd = 0;
-+                    ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) =
-+                              MEM_CARD_OPTION_REQUIRED
-+                            | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14)
-+                            | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT
-+                            | MEM_CARD_OPTION_DATA_XFR_WIDTH_1;
-+                }
-+                break;
-+            case MMC_SELECT_CARD:
-+                if((cmd->arg >> 16) == 0) {
-+                    /* We have been deselected. */
-+                    ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) =
-+                          MEM_CARD_OPTION_REQUIRED
-+                        | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14)
-+                        | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT
-+                        | MEM_CARD_OPTION_DATA_XFR_WIDTH_1;
-+                }
-+        }
-+    }
-+
-+    /*
-+     * If there is data to handle we enable data IRQs here, and we will
-+     * ultimatley finish the request in the mmc_data_end_irq handler.
-+     */
-+    if(host->data && (cmd->error == MMC_ERR_NONE)){
-+        if(host->data->flags & MMC_DATA_READ) {
-+            /* Enable the read enable interrupt */
-+            ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &=
-+                ~SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE;
-+        } else {
-+            /* Enable the write enable interrupt */
-+            ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &=
-+                ~SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE;
-+        }
-+    } else {
-+        /* There's no data, or we encountered an error, so finish now. */
-+        mmc_finish_request(host);
-+    }
-+
-+    return;
-+}
-+
-+static void hwinit2_irqsafe(struct asic3_mmc_host *host);
-+
-+static irqreturn_t
-+mmc_irq(int irq, void *irq_desc)
-+{
-+    struct asic3_mmc_host *host;
-+    unsigned int breg, bmask, bstatus, creg, cmask, cstatus;
-+
-+    host = irq_desc;
-+
-+    /* asic3 bstatus has errors */
-+    bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl);
-+    bmask   = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer);
-+    cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus);
-+    cmask   = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard);
-+    breg    = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS;
-+    creg    = cstatus & ~cmask & ~DONT_CARE_CARD_BITS;
-+
-+    if (!breg && !creg) {
-+        /* This occurs sometimes for no known reason.  It doesn't hurt
-+         * anything, so I don't print it.  */
-+        ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= ~breg;
-+        ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) &= ~creg;
-+        goto out;
-+    }
-+
-+    while (breg || creg) {
-+
-+        /* XXX TODO: Need to handle errors in breg here. */
-+
-+        /*
-+         * Card insert/remove.  The mmc controlling code is stateless.  That
-+         * is, it doesn't care if it was an insert or a remove.  It treats
-+         * both the same.
-+         */
-+        /* XXX Asic3 has _3 versions of these status bits, too, for a second slot, perhaps? */
-+        if (creg & (SD_CTRL_CARDSTATUS_CARD_INSERTED_0 | SD_CTRL_CARDSTATUS_CARD_REMOVED_0)) {
-+            ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &=
-+                ~(SD_CTRL_CARDSTATUS_CARD_REMOVED_0 | SD_CTRL_CARDSTATUS_CARD_INSERTED_0);
-+            if(creg & SD_CTRL_CARDSTATUS_CARD_INSERTED_0) {
-+                hwinit2_irqsafe(host);
-+            }
-+            mmc_detect_change(host->mmc,1);
-+        }
-+
-+        /* Command completion */
-+        if (creg & SD_CTRL_CARDSTATUS_RESPONSE_END) {
-+            ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &=
-+                ~(SD_CTRL_CARDSTATUS_RESPONSE_END);
-+            mmc_cmd_irq(host, bstatus);
-+        }
-+
-+        /* Data transfer */
-+        if (breg & (SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE)) {
-+            ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) &=
-+                ~(SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE);
-+	    tasklet_schedule(&mmc_data_read_tasklet);
-+        }
-+
-+        /* Data transfer completion */
-+        if (creg & SD_CTRL_CARDSTATUS_RW_END) {
-+            ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= ~(SD_CTRL_CARDSTATUS_RW_END);
-+            mmc_data_end_irq(host);
-+        }
-+
-+        /* Check status - keep going until we've handled it all */
-+        bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl);
-+        bmask   = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer);
-+        cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus);
-+        cmask   = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard);
-+        breg    = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS;
-+        creg    = cstatus & ~cmask & ~DONT_CARE_CARD_BITS;
-+    }
-+
-+out:
-+    /* Ensure all interrupt sources are cleared */
-+    ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0;
-+    return IRQ_HANDLED;
-+}
-+
-+static void
-+mmc_start_data(struct asic3_mmc_host *host, struct mmc_data *data)
-+{
-+    DBG("setup data transfer: blocksize %08x  nr_blocks %d, page: %08x, offset: %08x\n", data->blksz,
-+        data->blocks, (int)data->sg->page, data->sg->offset);
-+
-+    host->sg_len = data->sg_len;
-+    host->sg_ptr = data->sg;
-+    host->sg_off = 0;
-+    host->data   = data;
-+
-+    /* Set transfer length and blocksize */
-+    ASIC3_MMC_REG(host, SD_CTRL, TransferSectorCount) = data->blocks;
-+    ASIC3_MMC_REG(host, SD_CTRL, MemCardXferDataLen)  = data->blksz;
-+}
-+
-+/* Process requests from the MMC layer */
-+static void
-+mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+
-+    WARN_ON(host->mrq != NULL);
-+
-+    host->mrq = mrq;
-+
-+    /* If we're performing a data request we need to setup some
-+       extra information */
-+    if(mrq->data) {
-+        mmc_start_data(host, mrq->data);
-+    }
-+
-+    mmc_start_command(host, mrq->cmd);
-+}
-+
-+/* Set MMC clock / power.
-+ * Note: This controller uses a simple divider scheme therefore it cannot run
-+ * a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as MMC
-+ * wont run that fast, it has to be clocked at 12MHz which is the next slowest
-+ * setting.  This is likely not an issue because we are doing single 16-bit
-+ * writes for data I/O.
-+ */
-+static void
-+mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+    u32 clk = 0;
-+
-+    DBG("clock %uHz busmode %u powermode %u Vdd %u\n",
-+        ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-+
-+    if (ios->clock) {
-+        clk = 0x80; /* slowest by default */
-+        if(ios->clock >= 24000000 / 256) clk >>= 1;
-+        if(ios->clock >= 24000000 / 128) clk >>= 1;
-+        if(ios->clock >= 24000000 / 64)  clk >>= 1;
-+        if(ios->clock >= 24000000 / 32)  clk >>= 1;
-+        if(ios->clock >= 24000000 / 16)  clk >>= 1;
-+        if(ios->clock >= 24000000 / 8)   clk >>= 1;
-+        if(ios->clock >= 24000000 / 4)   clk >>= 1;
-+        if(ios->clock >= 24000000 / 2)   clk >>= 1;
-+        if(ios->clock >= 24000000 / 1)   clk >>= 1;
-+        if(clk == 0) { /* For fastest speed we disable the divider. */
-+            ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0;
-+        } else {
-+            ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 1;
-+        }
-+        ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+        ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) =
-+              host->clock_for_sd
-+            | SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK
-+            | clk;
-+        msleep(10);
-+    } else {
-+        ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+    }
-+
-+    switch (ios->power_mode) {
-+        case MMC_POWER_OFF:
-+            ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0;
-+            msleep(1);
-+            break;
-+        case MMC_POWER_UP:
-+            break;
-+        case MMC_POWER_ON:
-+            ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = SD_CONFIG_POWER1_PC_33V;
-+            msleep(20);
-+            break;
-+    }
-+}
-+
-+static int
-+mmc_get_ro(struct mmc_host *mmc)
-+{
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+
-+    /* Call custom handler for RO status */
-+    if(host->hwconfig->mmc_get_ro) {
-+            /* Special case for cards w/o WP lock (like miniSD) */
-+            if (host->hwconfig->mmc_get_ro == (void*)-1) {
-+		    return 0;
-+            } else {
-+		    struct platform_device *pdev = to_platform_device(mmc_dev(mmc));
-+        	    return host->hwconfig->mmc_get_ro(pdev);
-+            }
-+    }
-+
-+    /* WRITE_PROTECT is active low */
-+    return (ASIC3_MMC_REG(host, SD_CTRL, CardStatus) & SD_CTRL_CARDSTATUS_WRITE_PROTECT)?0:1;
-+}
-+
-+static struct mmc_host_ops mmc_ops = {
-+    .request        = mmc_request,
-+    .set_ios        = mmc_set_ios,
-+    .get_ro         = mmc_get_ro,
-+};
-+
-+static void
-+hwinit2_irqsafe(struct asic3_mmc_host *host)
-+{
-+    ASIC3_MMC_REG(host, SD_CONFIG, Addr1) = 0x0000;
-+    ASIC3_MMC_REG(host, SD_CONFIG, Addr0) = 0x0800;
-+
-+    ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = SD_CONFIG_CLKSTOP_ENABLE_ALL;
-+    ASIC3_MMC_REG(host, SD_CONFIG, SDHC_CardDetect) = 2;
-+    ASIC3_MMC_REG(host, SD_CONFIG, Command) = SD_CONFIG_COMMAND_MAE;
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 0; /* reset on */
-+    mdelay(2);
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 1; /* reset off */
-+    mdelay(2);
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) =
-+          MEM_CARD_OPTION_REQUIRED
-+        | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14)
-+        | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT
-+        | MEM_CARD_OPTION_DATA_XFR_WIDTH_1
-+        ;
-+    host->clock_for_sd = 0;
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0;
-+
-+    ASIC3_MMC_REG(host, SDIO_CTRL, ClocknWaitCtrl) = 0x100;
-+    /* *((unsigned short *)(((char *)host->ctl_base) + 0x938)) = 0x100; */
-+
-+    ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+
-+    mdelay(1);
-+
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~(
-+          SD_CTRL_INTMASKCARD_RESPONSE_END
-+        | SD_CTRL_INTMASKCARD_RW_END
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_0
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_0
-+#if 0
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_3
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_3
-+#endif
-+        )
-+        ; /* check */
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = 0xffff;  /* IRQs off */
-+
-+    /*
-+     * ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = SD_CTRL_TRANSACTIONCONTROL_SET;
-+     *   Wince has 0x1000
-+     */
-+    /* ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = 0x1000; */
-+
-+
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SDPWR, ASIC3_SDHWCTRL_SDPWR); /* turn on power at controller(?) */
-+
-+}
-+
-+static void
-+hwinit(struct asic3_mmc_host *host, struct platform_device *pdev)
-+{
-+    /* Call custom handler for enabling clock (if needed) */
-+    if(host->hwconfig->set_mmc_clock)
-+            host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_ENABLED);
-+
-+    /* Not sure if it must be done bit by bit, but leaving as-is */
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVCD, ASIC3_SDHWCTRL_LEVCD);
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVWP, ASIC3_SDHWCTRL_LEVWP);
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0);
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_PCLR, 0);
-+
-+    asic3_set_clock_cdex (host->asic3_dev,
-+        CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0, CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0);
-+    msleep(1);
-+
-+    asic3_set_clock_sel (host->asic3_dev,
-+        CLOCK_SEL_SD_HCLK_SEL | CLOCK_SEL_SD_BCLK_SEL,
-+	CLOCK_SEL_SD_HCLK_SEL | 0);	/* ? */
-+
-+    asic3_set_clock_cdex (host->asic3_dev,
-+        CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS,
-+	CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS);
-+    msleep(1);
-+
-+    asic3_set_extcf_select(host->asic3_dev, ASIC3_EXTCF_SD_MEM_ENABLE, ASIC3_EXTCF_SD_MEM_ENABLE);
-+
-+    /* Long Delay */
-+    if( !machine_is_h4700())
-+        msleep(500);
-+
-+    hwinit2_irqsafe(host);
-+}
-+
-+#ifdef CONFIG_PM
-+static int
-+mmc_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+    struct mmc_host *mmc = platform_get_drvdata(pdev);
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+    int ret;
-+
-+    ret = mmc_suspend_host(mmc, state);
-+
-+    if (ret) {
-+	printk(KERN_ERR DRIVER_NAME ": Could not suspend MMC host, hardware not suspended");
-+	return ret;
-+    }
-+
-+    /* disable the card insert / remove interrupt while sleeping */
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~(
-+          SD_CTRL_INTMASKCARD_RESPONSE_END
-+        | SD_CTRL_INTMASKCARD_RW_END);
-+
-+    /* disable clock */
-+    ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+    ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = 0;
-+
-+    /* power down */
-+    ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0;
-+
-+    asic3_set_clock_cdex (host->asic3_dev,
-+        CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS, 0);
-+
-+    /* disable core clock */
-+    if(host->hwconfig->set_mmc_clock)
-+        host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_DISABLED);
-+
-+    /* Put in suspend mode */
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, ASIC3_SDHWCTRL_SUSPEND);
-+    return 0;
-+}
-+
-+static int
-+mmc_resume(struct platform_device *pdev)
-+{
-+    struct mmc_host *mmc = platform_get_drvdata(pdev);
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+
-+    printk(KERN_INFO "%s: starting resume\n", DRIVER_NAME);
-+
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0);
-+    hwinit(host, pdev);
-+
-+    /* re-enable card remove / insert interrupt */
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~(
-+          SD_CTRL_INTMASKCARD_RESPONSE_END
-+        | SD_CTRL_INTMASKCARD_RW_END
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_0
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 );
-+
-+    mmc_resume_host(mmc);
-+
-+    printk(KERN_INFO "%s: finished resume\n", DRIVER_NAME);
-+    return 0;
-+}
-+#endif
-+
-+static int
-+mmc_probe(struct platform_device *pdev)
-+{
-+    struct mmc_host *mmc;
-+    struct asic3_mmc_host *host = NULL;
-+    int retval = 0;
-+    struct tmio_mmc_hwconfig *mmc_config = (struct tmio_mmc_hwconfig *)pdev->dev.platform_data;
-+
-+    /* bus_shift is mandatory */
-+    if (!mmc_config) {
-+        printk(KERN_ERR DRIVER_NAME ": Invalid configuration\n");
-+    	return -EINVAL;
-+    }
-+
-+    mmc = mmc_alloc_host(sizeof(struct asic3_mmc_host) + 128, &pdev->dev);
-+    if (!mmc) {
-+        retval = -ENOMEM;
-+        goto exceptional_return;
-+    }
-+
-+    host = mmc_priv(mmc);
-+    host->mmc = mmc;
-+    platform_set_drvdata(pdev, mmc);
-+
-+    host->ctl_base = 0;
-+    host->hwconfig = mmc_config;
-+    host->bus_shift = mmc_config->address_shift;
-+    host->asic3_dev = pdev->dev.parent;
-+    host->clock_for_sd = 0;
-+
-+    tasklet_init(&mmc_data_read_tasklet, mmc_data_transfer, (unsigned long)host);
-+
-+    host->ctl_base = ioremap_nocache ((unsigned long)pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start);
-+    if(!host->ctl_base){
-+	printk(KERN_ERR DRIVER_NAME ": Could not map ASIC3 SD controller\n");
-+        retval = -ENODEV;
-+        goto exceptional_return;
-+    }
-+
-+    printk(DRIVER_NAME ": ASIC3 MMC/SD Driver, controller at 0x%lx\n", (unsigned long)pdev->resource[0].start);
-+
-+    mmc->ops = &mmc_ops;
-+    mmc->caps = MMC_CAP_4_BIT_DATA;
-+    mmc->f_min = 46875; /* ARIC: not sure what these should be */
-+    mmc->f_max = 24000000; /* ARIC: not sure what these should be */
-+    mmc->ocr_avail = MMC_VDD_32_33;
-+
-+    hwinit(host, pdev);
-+
-+
-+    host->irq = pdev->resource[1].start;
-+
-+    retval = request_irq(host->irq, mmc_irq, 0, DRIVER_NAME, host);
-+    if(retval) {
-+        printk(KERN_ERR DRIVER_NAME ": Unable to get interrupt\n");
-+        retval = -ENODEV;
-+        goto exceptional_return;
-+    }
-+    set_irq_type(host->irq, IRQT_FALLING);
-+
-+    mmc_add_host(mmc);
-+
-+#ifdef CONFIG_PM
-+    // resume_timer.function = resume_timer_callback;
-+    // resume_timer.data = 0;
-+    // init_timer(&resume_timer);
-+#endif
-+
-+    return 0;
-+
-+exceptional_return:
-+    if (mmc) {
-+        mmc_free_host(mmc);
-+    }
-+    if(host && host->ctl_base) iounmap(host->ctl_base);
-+    return retval;
-+}
-+
-+static int
-+mmc_remove(struct platform_device *pdev)
-+{
-+    struct mmc_host *mmc = platform_get_drvdata(pdev);
-+
-+    platform_set_drvdata(pdev, NULL);
-+
-+    if (mmc) {
-+        struct asic3_mmc_host *host = mmc_priv(mmc);
-+        mmc_remove_host(mmc);
-+        free_irq(host->irq, host);
-+        /* FIXME - we might want to consider stopping the chip here... */
-+        iounmap(host->ctl_base);
-+        mmc_free_host(mmc); /* FIXME - why does this call hang? */
-+    }
-+    return 0;
-+}
-+
-+/* ------------------- device registration ----------------------- */
-+
-+static struct platform_driver mmc_asic3_driver = {
-+    .driver = {
-+	.name    = DRIVER_NAME,
-+    },
-+    .probe   = mmc_probe,
-+    .remove  = mmc_remove,
-+#ifdef CONFIG_PM
-+    .suspend = mmc_suspend,
-+    .resume  = mmc_resume,
-+#endif
-+};
-+
-+static int __init mmc_init(void)
-+{
-+    return platform_driver_register(&mmc_asic3_driver);
-+}
-+
-+static void __exit mmc_exit(void)
-+{
-+    platform_driver_unregister(&mmc_asic3_driver);
-+}
-+
-+late_initcall(mmc_init);
-+module_exit(mmc_exit);
-+
-+MODULE_DESCRIPTION("HTC ASIC3 SD/MMC driver");
-+MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC");
-+MODULE_LICENSE("GPL");
-+
-Index: linux-2.6.24/drivers/mmc/host/asic3_mmc.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/mmc/host/asic3_mmc.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,25 @@
-+#ifndef __ASIC3_MMC_H
-+#define __ASIC3_MMC_H
-+
-+#define DRIVER_NAME	"asic3_mmc"
-+
-+#ifdef CONFIG_MMC_DEBUG
-+#define DBG(x...)       printk(DRIVER_NAME ": " x)
-+#else
-+#define DBG(x...)       do { } while (0)
-+#endif
-+
-+/* Response types */
-+#define APP_CMD        0x0040
-+
-+#define SD_CONFIG_CLKSTOP_ENABLE_ALL 0x1f
-+
-+#define DONT_CARE_CARD_BITS ( \
-+      SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 \
-+    | SD_CTRL_INTMASKCARD_WRITE_PROTECT \
-+    | SD_CTRL_INTMASKCARD_UNK6 \
-+    | SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 \
-+  )
-+#define DONT_CARE_BUFFER_BITS ( SD_CTRL_INTMASKBUFFER_UNK7 | SD_CTRL_INTMASKBUFFER_CMD_BUSY )
-+
-+#endif // __ASIC3_MMC_H
-Index: linux-2.6.24/drivers/input/keyboard/asic3_keys.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/input/keyboard/asic3_keys.c	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,131 @@
-+/*
-+ * Generic buttons driver for ASIC3 SoC.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * Copyright (C) 2003 Joshua Wise
-+ * Copyright (C) 2005 Pawel Kolodziejski
-+ * Copyright (C) 2006 Paul Sokolovsky
-+ *
-+ */
-+
-+#include <linux/input.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/hardware.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <asm/hardware/asic3_keys.h>
-+
-+static irqreturn_t asic3_keys_asic_handle(int irq, void *data)
-+{
-+	struct asic3_keys_platform_data *pdata = data;
-+	int i, base_irq;
-+
-+	base_irq = asic3_irq_base(pdata->asic3_dev);
-+	for (i = 0; i < pdata->nbuttons; i++) {
-+		struct asic3_keys_button *b = &pdata->buttons[i];
-+		if ((base_irq + b->gpio) == irq) {
-+			int state = !!asic3_gpio_get_value(pdata->asic3_dev, b->gpio);
-+
-+			if (pdata->buttons[i].type == EV_SW)
-+				input_report_switch(pdata->input, pdata->buttons[i].keycode, state ^ b->active_low);
-+			else
-+				input_report_key(pdata->input, b->keycode, state ^ b->active_low);
-+			input_sync(pdata->input);
-+		}
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __devinit asic3_keys_probe(struct platform_device *pdev)
-+{
-+	struct asic3_keys_platform_data *pdata = pdev->dev.platform_data;
-+	int i, base_irq;
-+	int j, ret;
-+
-+	pdata->input = input_allocate_device();
-+
-+	base_irq = asic3_irq_base(pdata->asic3_dev);
-+
-+	for (i = 0; i < pdata->nbuttons; i++) {
-+		struct asic3_keys_button *b = &pdata->buttons[i];
-+		set_bit(b->keycode, pdata->input->keybit);
-+                ret=request_irq(base_irq + b->gpio, asic3_keys_asic_handle, SA_SAMPLE_RANDOM, b->desc, pdata);
-+                if (ret)
-+                {
-+                 printk(KERN_NOTICE "Failed to allocate asic3_keys irq=%d.\n",b->gpio);
-+
-+                 for(j=0; j<i ; j++)
-+                  free_irq(base_irq + pdata->buttons[i].gpio, NULL);
-+
-+                 input_unregister_device (pdata->input);
-+
-+                 return -ENODEV;
-+                }
-+
-+		set_irq_type(base_irq + b->gpio, IRQT_BOTHEDGE);
-+		if (pdata->buttons[i].type == EV_SW) {
-+			pdata->input->evbit[0] |= BIT(EV_SW);
-+			set_bit(b->keycode, pdata->input->swbit);
-+		} else {
-+			pdata->input->evbit[0] |= BIT(EV_KEY);
-+			set_bit(b->keycode, pdata->input->keybit);
-+		}
-+	}
-+
-+	pdata->input->name = pdev->name;
-+	input_register_device(pdata->input);
-+
-+	return 0;
-+}
-+
-+static int __devexit asic3_keys_remove(struct platform_device *pdev)
-+{
-+	struct asic3_keys_platform_data *pdata = pdev->dev.platform_data;
-+	int i, base_irq;
-+
-+	base_irq = asic3_irq_base(pdata->asic3_dev);
-+	for (i = 0; i < pdata->nbuttons; i++) {
-+		free_irq(base_irq + pdata->buttons[i].gpio, NULL);
-+	}
-+
-+	input_unregister_device(pdata->input);
-+
-+	return 0;
-+}
-+
-+
-+static struct platform_driver asic3_keys_driver = {
-+	.probe          = asic3_keys_probe,
-+        .remove         = __devexit_p(asic3_keys_remove),
-+	.driver		= {
-+	    .name       = "asic3-keys",
-+	},
-+};
-+
-+static int __init asic3_keys_init(void)
-+{
-+	return platform_driver_register(&asic3_keys_driver);
-+}
-+
-+static void __exit asic3_keys_exit(void)
-+{
-+	platform_driver_unregister(&asic3_keys_driver);
-+}
-+
-+module_init(asic3_keys_init);
-+module_exit(asic3_keys_exit);
-+
-+MODULE_AUTHOR("Joshua Wise, Pawel Kolodziejski, Paul Sokolovsky");
-+MODULE_DESCRIPTION("Buttons driver for HTC ASIC3 SoC");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.24/include/asm-arm/arch-pxa/irqs.h
-===================================================================
---- linux-2.6.24.orig/include/asm-arm/arch-pxa/irqs.h	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/irqs.h	2008-03-10 16:09:23.000000000 +0000
-@@ -182,6 +182,8 @@
-       defined(CONFIG_MACH_LOGICPD_PXA270) || \
-       defined(CONFIG_MACH_MAINSTONE)
- #define NR_IRQS			(IRQ_BOARD_END)
-+#elif defined(CONFIG_MACH_HTCUNIVERSAL)
-+#define NR_IRQS			(IRQ_BOARD_START + 96)
- #else
- #define NR_IRQS			(IRQ_BOARD_START)
- #endif
-Index: linux-2.6.24/include/asm-arm/arch-pxa/serial.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/serial.h	2008-03-10 16:09:23.000000000 +0000
-@@ -0,0 +1,78 @@
-+/*
-+ *  linux/include/asm-arm/arch-pxa/serial.h
-+ *
-+ * Author:	Nicolas Pitre
-+ * Copyright:	(C) 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <asm/arch/pxa-regs.h>
-+
-+#define BAUD_BASE	921600
-+
-+/* Standard COM flags */
-+#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-+
-+#define STD_SERIAL_PORT_DEFNS	\
-+	{	\
-+		type:			PORT_PXA,	\
-+		xmit_fifo_size:		64,		\
-+		baud_base:		BAUD_BASE,	\
-+		iomem_base:		&FFUART,	\
-+		iomem_reg_shift:	2,		\
-+		io_type:		SERIAL_IO_MEM,	\
-+		irq:			IRQ_FFUART,	\
-+		flags:			STD_COM_FLAGS,	\
-+	}, {	\
-+		type:			PORT_PXA,	\
-+		xmit_fifo_size:		64,		\
-+		baud_base:		BAUD_BASE,	\
-+		iomem_base:		&STUART,	\
-+		iomem_reg_shift:	2,		\
-+		io_type:		SERIAL_IO_MEM,	\
-+		irq:			IRQ_STUART,	\
-+		flags:			STD_COM_FLAGS,	\
-+	}, {	\
-+		type:			PORT_PXA,	\
-+		xmit_fifo_size:		64,		\
-+		baud_base:		BAUD_BASE,	\
-+		iomem_base:		&BTUART,	\
-+		iomem_reg_shift:	2,		\
-+		io_type:		SERIAL_IO_MEM,	\
-+		irq:			IRQ_BTUART,	\
-+		flags:			STD_COM_FLAGS,	\
-+	}
-+
-+#define EXTRA_SERIAL_PORT_DEFNS
-+
-+struct platform_pxa_serial_funcs {
-+
-+	/* Initialize whatever is connected to this serial port. */
-+	void (*configure)(int state);
-+#define PXA_UART_CFG_PRE_STARTUP   0
-+#define PXA_UART_CFG_POST_STARTUP  1
-+#define PXA_UART_CFG_PRE_SHUTDOWN  2
-+#define PXA_UART_CFG_POST_SHUTDOWN 3
-+
-+	/* Enable or disable the individual transmitter/receiver submodules.
-+	 * On transceivers without echo cancellation (e.g. SIR)
-+	 * transmitter always has priority; e.g. if both bits are set,
-+	 * only the transmitter is enabled. */
-+        void (*set_txrx)(int txrx);
-+#define PXA_SERIAL_TX 1
-+#define PXA_SERIAL_RX 2
-+
-+	/* Get the current state of tx/rx. */
-+	int (*get_txrx)(void);
-+
-+	int (*suspend)(struct platform_device *dev, pm_message_t state);
-+	int (*resume)(struct platform_device *dev);
-+};
-+
-+void pxa_set_ffuart_info(struct platform_pxa_serial_funcs *ffuart_funcs);
-+void pxa_set_btuart_info(struct platform_pxa_serial_funcs *btuart_funcs);
-+void pxa_set_stuart_info(struct platform_pxa_serial_funcs *stuart_funcs);
-+void pxa_set_hwuart_info(struct platform_pxa_serial_funcs *hwuart_funcs);
-Index: linux-2.6.24/drivers/serial/pxa.c
-===================================================================
---- linux-2.6.24.orig/drivers/serial/pxa.c	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/drivers/serial/pxa.c	2008-03-10 16:09:23.000000000 +0000
-@@ -47,6 +47,7 @@
- #include <asm/io.h>
- #include <asm/hardware.h>
- #include <asm/irq.h>
-+#include <asm/arch/serial.h>
- #include <asm/arch/pxa-regs.h>
- 
- 
-@@ -60,6 +61,14 @@
- 	char			*name;
- };
- 
-+
-+#define IS_METHOD(dev, method) (dev && (dev)->platform_data && ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method)
-+#define METHOD_CALL(dev, method) \
-+		((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method()
-+#define SAFE_METHOD_CALL(dev, method, args...) \
-+	if (IS_METHOD(dev, method)) \
-+		((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method(args)
-+
- static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
- {
- 	offset <<= 2;
-@@ -347,6 +356,9 @@
- 	unsigned long flags;
- 	int retval;
- 
-+	/* Perform platform-specific port initialization, if needed. */
-+	SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_STARTUP);
-+
- 	if (port->line == 3) /* HWUART */
- 		up->mcr |= UART_MCR_AFE;
- 	else
-@@ -404,6 +416,12 @@
- 	(void) serial_in(up, UART_IIR);
- 	(void) serial_in(up, UART_MSR);
- 
-+	/*
-+	 * Perform platform-specific port initialization if needed
-+	 */
-+	SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_STARTUP);
-+	SAFE_METHOD_CALL(port->dev, set_txrx, PXA_SERIAL_RX);
-+
- 	return 0;
- }
- 
-@@ -412,6 +430,8 @@
- 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
- 	unsigned long flags;
- 
-+	SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_SHUTDOWN);
-+
- 	free_irq(up->port.irq, up);
- 
- 	/*
-@@ -433,6 +453,8 @@
- 				  UART_FCR_CLEAR_RCVR |
- 				  UART_FCR_CLEAR_XMIT);
- 	serial_out(up, UART_FCR, 0);
-+
-+	SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_SHUTDOWN);
- }
- 
- static void
-Index: linux-2.6.24/arch/arm/mach-pxa/generic.c
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/generic.c	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/generic.c	2008-03-10 16:09:23.000000000 +0000
-@@ -38,6 +38,7 @@
- #include <asm/arch/mmc.h>
- #include <asm/arch/irda.h>
- #include <asm/arch/i2c.h>
-+#include <asm/arch/serial.h>
- 
- #include "devices.h"
- #include "generic.h"
-@@ -412,6 +413,18 @@
- 	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
- };
- 
-+void __init pxa_set_ffuart_info(struct platform_pxa_serial_funcs *info)
-+{
-+ 	pxa_device_ffuart.dev.platform_data = info;
-+}
-+EXPORT_SYMBOL(pxa_set_ffuart_info);
-+
-+void __init pxa_set_btuart_info(struct platform_pxa_serial_funcs *info)
-+{
-+ 	pxa_device_btuart.dev.platform_data = info;
-+}
-+EXPORT_SYMBOL(pxa_set_btuart_info);
-+
- static struct resource pxai2c_resources[] = {
- 	{
- 		.start	= 0x40301680,
-Index: linux-2.6.24/drivers/leds/Makefile
-===================================================================
---- linux-2.6.24.orig/drivers/leds/Makefile	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/drivers/leds/Makefile	2008-03-10 16:09:23.000000000 +0000
-@@ -15,6 +15,7 @@
- obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
-+obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
- obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
- obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
- obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
-Index: linux-2.6.24/drivers/input/keyboard/Kconfig
-===================================================================
---- linux-2.6.24.orig/drivers/input/keyboard/Kconfig	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/drivers/input/keyboard/Kconfig	2008-03-10 16:09:23.000000000 +0000
-@@ -293,4 +293,11 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called bf54x-keys.
- 
-+config KEYBOARD_ASIC3
-+        tristate "Buttons on ASIC3 SoC GPIOs (iPaqs, etc.)"
-+        depends on HTC_ASIC3
-+        help
-+          This enables support for the buttons attached to GPIOs of
-+          HTC ASIC3 peripheral controller.
-+
- endif
-Index: linux-2.6.24/drivers/mmc/host/Kconfig
-===================================================================
---- linux-2.6.24.orig/drivers/mmc/host/Kconfig	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/drivers/mmc/host/Kconfig	2008-03-10 16:09:59.000000000 +0000
-@@ -24,6 +24,13 @@
- 
- 	  If unsure, say N.
- 
-+config MMC_ASIC3
-+	tristate "HTC ASIC3 SD/MMC support"
-+	depends on MMC && HTC_ASIC3
-+	help
-+	  This provides support for the ASIC3 SD/MMC controller, used
-+	  in the iPAQ hx4700 and others.
-+
- config MMC_SDHCI
- 	tristate "Secure Digital Host Controller Interface support  (EXPERIMENTAL)"
- 	depends on PCI && EXPERIMENTAL
-Index: linux-2.6.24/drivers/input/keyboard/Makefile
-===================================================================
---- linux-2.6.24.orig/drivers/input/keyboard/Makefile	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/drivers/input/keyboard/Makefile	2008-03-10 16:10:28.000000000 +0000
-@@ -6,6 +6,7 @@
- 
- obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
- obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
-+obj-$(CONFIG_KEYBOARD_ASIC3)		+= asic3_keys.o
- obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
- obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
- obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/mtd-module.patch b/packages/kexecboot/linux-kexecboot-2.6.24/mtd-module.patch
deleted file mode 100644
index 4aa2f22aee..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/mtd-module.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.23/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.23/drivers/mtd/maps/Kconfig
-+++ linux-2.6.23/drivers/mtd/maps/Kconfig
-@@ -600,7 +600,7 @@
- 	default "4"
- 
- config MTD_SHARP_SL
--	bool "ROM mapped on Sharp SL Series"
-+	tristate "ROM mapped on Sharp SL Series"
- 	depends on ARCH_PXA
- 	help
- 	  This enables access to the flash chip on the Sharp SL Series of PDAs.
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/poodle-bootparams.patch b/packages/kexecboot/linux-kexecboot-2.6.24/poodle-bootparams.patch
deleted file mode 100644
index 4c22fb7960..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/poodle-bootparams.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- ../ref/linux-2.6.21.6/arch/arm/mach-pxa/poodle.c	2007-07-06 23:47:55.000000000 -0500
-+++ linux-2.6.21.6-armeb/arch/arm/mach-pxa/poodle.c	2007-08-06 23:02:50.000000000 -0500
-@@ -409,6 +409,7 @@
- 
- MACHINE_START(POODLE, "SHARP Poodle")
- 	.phys_io	= 0x40000000,
-+	.boot_params	= 0xa0000200,  /* fake boot params loc for kexec */
- 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
- 	.fixup		= fixup_poodle,
- 	.map_io		= pxa_map_io,
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/poodle/defconfig b/packages/kexecboot/linux-kexecboot-2.6.24/poodle/defconfig
deleted file mode 100644
index 6ad99c785d..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/poodle/defconfig
+++ /dev/null
@@ -1,903 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Feb  1 20:09:19 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA_SHARPSL_25x=y
-# CONFIG_PXA_SHARPSL_27x is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-CONFIG_MACH_POODLE=y
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
-# CONFIG_MACH_TOSA is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-# CONFIG_SUSPEND is not set
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_PROC_FS is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=y
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_POWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-# CONFIG_KEYBOARD_SPITZ is not set
-CONFIG_SHARPSL_RC=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_LCD_QVGA=y
-# CONFIG_FB_PXA_LCD_VGA is not set
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-CONFIG_CRAMFS=y
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/poodle_buildfixes.patch b/packages/kexecboot/linux-kexecboot-2.6.24/poodle_buildfixes.patch
deleted file mode 100644
index 2447234a0a..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/poodle_buildfixes.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-diff -up ./drivers/video/pxafb.c.helge ./drivers/video/pxafb.c
---- ./drivers/video/pxafb.c.helge	2008-01-27 13:26:44.000000000 +0100
-+++ ./drivers/video/pxafb.c	2008-01-27 13:27:39.000000000 +0100
-@@ -1194,7 +1194,7 @@ pxafb_freq_transition(struct notifier_bl
- 		if ((clkinfo->old == 13000))
- 			break;
- 
--		pcd = get_pcd(fbi->fb.var.pixclock);
-+		pcd = get_pcd(fbi, fbi->fb.var.pixclock);
- 		lccr3 = fbi->reg_lccr3;
- 		set_hsync_time(fbi, pcd);
- 		fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
-diff -up ./drivers/video/backlight/locomolcd.c.helge ./drivers/video/backlight/locomolcd.c
---- ./drivers/video/backlight/locomolcd.c.helge	2008-01-27 15:40:33.000000000 +0100
-+++ ./drivers/video/backlight/locomolcd.c	2008-01-27 15:42:26.000000000 +0100
-@@ -80,7 +80,7 @@ static void locomolcd_off(int comadj)
- 	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
- }
- 
--void locomolcd_power(int on)
-+void locomolcd_power(int on, struct fb_var_screeninfo *var_unused)
- {
- 	int comadj = sharpsl_param.comadj;
- 	unsigned long flags;
-@@ -178,7 +178,7 @@ static int locomolcd_probe(struct locomo
- 	 * from fs_initcall, which is before locomo is activated.
- 	 * We need to recall poodle_lcd_power here*/
- 	if (machine_is_poodle())
--		locomolcd_power(1);
-+		locomolcd_power(1, NULL);
- 
- 	local_irq_restore(flags);
- 
-diff -up ./arch/arm/mach-pxa/poodle.c.helge ./arch/arm/mach-pxa/poodle.c
---- ./arch/arm/mach-pxa/poodle.c.helge	2008-01-27 13:07:09.000000000 +0100
-+++ ./arch/arm/mach-pxa/poodle.c	2008-01-27 15:49:59.000000000 +0100
-@@ -48,7 +48,7 @@
- #include "devices.h"
- #include "sharpsl.h"
- 
--extern void locomolcd_power(int on);
-+extern void locomolcd_power(int on, struct fb_var_screeninfo *var_unused);
- 
- static struct resource poodle_scoop_resources[] = {
- 	[0] = {
-@@ -176,7 +176,7 @@ static void poodle_null_hsync(void)
- }
- 
- static struct corgits_machinfo  poodle_ts_machinfo = {
--	.get_hsync_len   = poodle_get_hsync_len,
-+	.get_hsync_invperiod = poodle_get_hsync_len,
- 	.put_hsync       = poodle_null_hsync,
- 	.wait_hsync      = poodle_null_hsync,
- };
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/poodle_serial_vcc.patch b/packages/kexecboot/linux-kexecboot-2.6.24/poodle_serial_vcc.patch
deleted file mode 100644
index 80d1f95104..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/poodle_serial_vcc.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/arch/arm/common/locomo.c	2007-05-06 23:42:34.000000000 +0200
-+++ a/arch/arm/common/locomo.c	2007-05-06 17:05:43.000000000 +0200
-@@ -677,7 +677,7 @@ 
- 	locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
- 
- 	/* GPIO */
--	locomo_writel(0, lchip->base + LOCOMO_GPO);
-+	locomo_writel(POODLE_LOCOMO_GPIO_232VCC_ON, lchip->base + LOCOMO_GPO);
- 	locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
- 			, lchip->base + LOCOMO_GPE);
- 	locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
-
-
---- a/drivers/serial/pxa.c	2006-06-18 03:49:35.000000000 +0200
-+++ b/drivers/serial/pxa.c	2007-05-06 17:04:48.000000000 +0200
-@@ -290,9 +290,9 @@
- 	unsigned char mcr = 0;
- 
- 	if (mctrl & TIOCM_RTS)
--		mcr |= UART_MCR_RTS;
-+		mcr &= ~UART_MCR_RTS;
- 	if (mctrl & TIOCM_DTR)
--		mcr |= UART_MCR_DTR;
-+		mcr &= ~UART_MCR_DTR;
- 	if (mctrl & TIOCM_OUT1)
- 		mcr |= UART_MCR_OUT1;
- 	if (mctrl & TIOCM_OUT2)
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/poodle_ts.patch b/packages/kexecboot/linux-kexecboot-2.6.24/poodle_ts.patch
deleted file mode 100644
index b10ee2eab8..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/poodle_ts.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Index: linux-2.6.23/arch/arm/mach-pxa/poodle.c
-===================================================================
---- linux-2.6.23.orig/arch/arm/mach-pxa/poodle.c	2008-01-25 12:10:10.000000000 -0800
-+++ linux-2.6.23/arch/arm/mach-pxa/poodle.c	2008-01-25 12:11:58.000000000 -0800
-@@ -166,7 +166,7 @@
- 	},
- };
- 
--static unsigned long poodle_get_hsync_len(void)
-+static unsigned long poodle_get_hsync_invperiod(void)
- {
- 	return 0;
- }
-@@ -176,7 +176,7 @@
- }
- 
- static struct corgits_machinfo  poodle_ts_machinfo = {
--	.get_hsync_len   = poodle_get_hsync_len,
-+	.get_hsync_invperiod   = poodle_get_hsync_invperiod,
- 	.put_hsync       = poodle_null_hsync,
- 	.wait_hsync      = poodle_null_hsync,
- };
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/pxa-resume.patch b/packages/kexecboot/linux-kexecboot-2.6.24/pxa-resume.patch
deleted file mode 100644
index 71d466e31c..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/pxa-resume.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
-
-index a941c71..039194c 100644
---- a/arch/arm/mach-pxa/pm.c
-+++ b/arch/arm/mach-pxa/pm.c
-@@ -38,34 +38,37 @@ int pxa_pm_enter(suspend_state_t state)
- 		iwmmxt_task_disable(NULL);
- #endif
- 
--	pxa_cpu_pm_fns->save(sleep_save);
-+	/* skip registers saving for standby */
-+	if (state != PM_SUSPEND_STANDBY) {
-+		pxa_cpu_pm_fns->save(sleep_save);
-+		/* before sleeping, calculate and save a checksum */
-+		for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
-+			sleep_save_checksum += sleep_save[i];
-+	}
- 
- 	/* Clear sleep reset status */
- 	RCSR = RCSR_SMR;
- 
--	/* before sleeping, calculate and save a checksum */
--	for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
--		sleep_save_checksum += sleep_save[i];
--
- 	/* *** go zzz *** */
- 	pxa_cpu_pm_fns->enter(state);
- 	cpu_init();
- 
--	/* after sleeping, validate the checksum */
--	for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
--		checksum += sleep_save[i];
-+	if (state != PM_SUSPEND_STANDBY) {
-+		/* after sleeping, validate the checksum */
-+		for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
-+			checksum += sleep_save[i];
- 
--	/* if invalid, display message and wait for a hardware reset */
--	if (checksum != sleep_save_checksum) {
-+		/* if invalid, display message and wait for a hardware reset */
-+		if (checksum != sleep_save_checksum) {
- #ifdef CONFIG_ARCH_LUBBOCK
--		LUB_HEXLED = 0xbadbadc5;
-+			LUB_HEXLED = 0xbadbadc5;
- #endif
--		while (1)
--			pxa_cpu_pm_fns->enter(state);
-+			while (1)
-+				pxa_cpu_pm_fns->enter(state);
-+		}
-+		pxa_cpu_pm_fns->restore(sleep_save);
- 	}
- 
--	pxa_cpu_pm_fns->restore(sleep_save);
--
- 	pr_debug("*** made it back from resume\n");
- 
- 	return 0;
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/pxa-serial-hack.patch b/packages/kexecboot/linux-kexecboot-2.6.24/pxa-serial-hack.patch
deleted file mode 100644
index bf20f46a05..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/pxa-serial-hack.patch
+++ /dev/null
@@ -1,90 +0,0 @@
----
- drivers/serial/8250.c        |    5 +++++
- drivers/serial/serial_core.c |    1 +
- drivers/serial/serial_cs.c   |   12 +++++++++---
- include/linux/serial_core.h  |    1 +
- 4 files changed, 16 insertions(+), 3 deletions(-)
-
-Index: linux-2.6.20/drivers/serial/8250.c
-===================================================================
---- linux-2.6.20.orig/drivers/serial/8250.c	2007-04-27 13:37:26.000000000 +0100
-+++ linux-2.6.20/drivers/serial/8250.c	2007-04-27 13:38:16.000000000 +0100
-@@ -2429,7 +2429,12 @@
- 	.driver_name		= "serial",
- 	.dev_name		= "ttyS",
- 	.major			= TTY_MAJOR,
-+#ifdef CONFIG_SERIAL_PXA
-+	.minor			= 64 + 4,
-+	.name_base		= 4,
-+#else
- 	.minor			= 64,
-+#endif
- 	.nr			= UART_NR,
- 	.cons			= SERIAL8250_CONSOLE,
- };
-Index: linux-2.6.20/drivers/serial/serial_core.c
-===================================================================
---- linux-2.6.20.orig/drivers/serial/serial_core.c	2007-02-04 18:44:54.000000000 +0000
-+++ linux-2.6.20/drivers/serial/serial_core.c	2007-04-27 13:39:39.000000000 +0100
-@@ -2068,7 +2068,8 @@
- 	printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
- 	       port->dev ? port->dev->bus_id : "",
- 	       port->dev ? ": " : "",
--	       drv->dev_name, port->line, address, port->irq, uart_type(port));
-+	       drv->dev_name, port->line + drv->name_base, address, port->irq,
-+	       uart_type(port));
- }
- 
- static void
-@@ -2183,6 +2184,7 @@
- 	normal->owner		= drv->owner;
- 	normal->driver_name	= drv->driver_name;
- 	normal->name		= drv->dev_name;
-+	normal->name_base	= drv->name_base;
- 	normal->major		= drv->major;
- 	normal->minor_start	= drv->minor;
- 	normal->type		= TTY_DRIVER_TYPE_SERIAL;
-Index: linux-2.6.20/include/linux/serial_core.h
-===================================================================
---- linux-2.6.20.orig/include/linux/serial_core.h	2007-02-04 18:44:54.000000000 +0000
-+++ linux-2.6.20/include/linux/serial_core.h	2007-04-27 13:37:27.000000000 +0100
-@@ -341,6 +341,7 @@
- 	struct module		*owner;
- 	const char		*driver_name;
- 	const char		*dev_name;
-+	int			 name_base;
- 	int			 major;
- 	int			 minor;
- 	int			 nr;
-Index: linux-2.6.20/drivers/serial/serial_cs.c
-===================================================================
---- linux-2.6.20.orig/drivers/serial/serial_cs.c	2007-02-04 18:44:54.000000000 +0000
-+++ linux-2.6.20/drivers/serial/serial_cs.c	2007-04-27 13:40:34.000000000 +0100
-@@ -390,7 +390,7 @@
- 			kio_addr_t iobase, int irq)
- {
- 	struct uart_port port;
--	int line;
-+	int line, linestart;
- 
- 	memset(&port, 0, sizeof (struct uart_port));
- 	port.iobase = iobase;
-@@ -411,10 +411,16 @@
- 		return -EINVAL;
- 	}
- 
-+#if CONFIG_SERIAL_PXA
-+	linestart = 4;
-+#else
-+	linestart = 0;
-+#endif
-+
- 	info->line[info->ndev] = line;
--	sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
-+	sprintf(info->node[info->ndev].dev_name, "ttyS%d", line+linestart);
- 	info->node[info->ndev].major = TTY_MAJOR;
--	info->node[info->ndev].minor = 0x40 + line;
-+	info->node[info->ndev].minor = 0x40 + line + linestart;
- 	if (info->ndev > 0)
- 		info->node[info->ndev - 1].next = &info->node[info->ndev];
- 	info->ndev++;
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/pxa27x-resume.patch b/packages/kexecboot/linux-kexecboot-2.6.24/pxa27x-resume.patch
deleted file mode 100644
index 6447a0b104..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/pxa27x-resume.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-List:       linux-arm-kernel
-Subject:    [PATCH] Fix PXA27x resume
-From:       Russell King - ARM Linux <linux@arm.linux.org.uk>
-Date:       2008-01-21 13:53:31
-Message-ID: 20080121135331.GC30149@flint.arm.linux.org.uk
-[Download message RAW]
-
-When PXA27x wakes up, tick_resume_oneshot() tries to set a timer
-interrupt to occur immediately.  Since PXA27x requires at least
-MIN_OSCR_DELTA, this causes us to flag an error.
-
-tick_program_event() then increments the next event time by
-min_delta_ns.  However, by the time we get back to programming
-the next event, the OSCR has incremented such that we fail again.
-We repeatedly retry, but the OSCR is too fast for us - we never
-catch up, so we never break out of the loop - resulting in us
-never apparantly resuming.
-
-Fix this by doubling min_delta_ns.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
-diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
-index ac0bbad..7b7c017 100644
---- a/arch/arm/mach-pxa/time.c
-+++ b/arch/arm/mach-pxa/time.c
-@@ -169,7 +169,7 @@ static void __init pxa_timer_init(void)
- 	ckevt_pxa_osmr0.max_delta_ns =
- 		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
- 	ckevt_pxa_osmr0.min_delta_ns =
--		clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1;
-+		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
- 
- 	cksrc_pxa_oscr0.mult =
- 		clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
-
--------------------------------------------------------------------
-List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
-FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
-Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/pxa2xx_udc-clock.patch b/packages/kexecboot/linux-kexecboot-2.6.24/pxa2xx_udc-clock.patch
deleted file mode 100644
index 14c496a31a..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/pxa2xx_udc-clock.patch
+++ /dev/null
@@ -1,221 +0,0 @@
----
- drivers/usb/gadget/pxa2xx_udc.c |   88 ++++++++++++++++++++++------------------
- drivers/usb/gadget/pxa2xx_udc.h |    4 +
- 2 files changed, 53 insertions(+), 39 deletions(-)
-
---- g26.orig/drivers/usb/gadget/pxa2xx_udc.c	2008-02-19 12:47:06.000000000 -0800
-+++ g26/drivers/usb/gadget/pxa2xx_udc.c	2008-02-19 14:07:17.000000000 -0800
-@@ -103,6 +103,12 @@ static const char ep0name [] = "ep0";
- #error "Can't configure both IXP and PXA"
- #endif
- 
-+/* IXP doesn't yet support <linux/clk.h> */
-+#define clk_get(dev,name)	NULL
-+#define clk_enable(clk)		do { } while (0)
-+#define clk_disable(clk)	do { } while (0)
-+#define clk_put(clk)		do { } while (0)
-+
- #endif
- 
- #include "pxa2xx_udc.h"
-@@ -934,20 +940,31 @@ static void udc_disable(struct pxa2xx_ud
- /* We disable the UDC -- and its 48 MHz clock -- whenever it's not
-  * in active use.
-  */
--static int pullup(struct pxa2xx_udc *udc, int is_active)
-+static int pullup(struct pxa2xx_udc *udc)
- {
--	is_active = is_active && udc->vbus && udc->pullup;
-+	int is_active = udc->vbus && udc->pullup && !udc->suspended;
- 	DMSG("%s\n", is_active ? "active" : "inactive");
--	if (is_active)
--		udc_enable(udc);
--	else {
--		if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
--			DMSG("disconnect %s\n", udc->driver
--				? udc->driver->driver.name
--				: "(no driver)");
--			stop_activity(udc, udc->driver);
-+	if (is_active) {
-+		if (!udc->active) {
-+			udc->active = 1;
-+			/* Enable clock for USB device */
-+			clk_enable(udc->clk);
-+			udc_enable(udc);
- 		}
--		udc_disable(udc);
-+	} else {
-+		if (udc->active) {
-+			if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
-+				DMSG("disconnect %s\n", udc->driver
-+					? udc->driver->driver.name
-+					: "(no driver)");
-+				stop_activity(udc, udc->driver);
-+			}
-+			udc_disable(udc);
-+			/* Disable clock for USB device */
-+			clk_disable(udc->clk);
-+			udc->active = 0;
-+		}
-+
- 	}
- 	return 0;
- }
-@@ -958,9 +975,9 @@ static int pxa2xx_udc_vbus_session(struc
- 	struct pxa2xx_udc	*udc;
- 
- 	udc = container_of(_gadget, struct pxa2xx_udc, gadget);
--	udc->vbus = is_active = (is_active != 0);
-+	udc->vbus = (is_active != 0);
- 	DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
--	pullup(udc, is_active);
-+	pullup(udc);
- 	return 0;
- }
- 
-@@ -975,9 +992,8 @@ static int pxa2xx_udc_pullup(struct usb_
- 	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
- 		return -EOPNOTSUPP;
- 
--	is_active = (is_active != 0);
--	udc->pullup = is_active;
--	pullup(udc, is_active);
-+	udc->pullup = (is_active != 0);
-+	pullup(udc);
- 	return 0;
- }
- 
-@@ -1146,11 +1162,6 @@ static void udc_disable(struct pxa2xx_ud
- 
- 	udc_clear_mask_UDCCR(UDCCR_UDE);
- 
--#ifdef	CONFIG_ARCH_PXA
--        /* Disable clock for USB device */
--	clk_disable(dev->clk);
--#endif
--
- 	ep0_idle (dev);
- 	dev->gadget.speed = USB_SPEED_UNKNOWN;
- }
-@@ -1191,11 +1202,6 @@ static void udc_enable (struct pxa2xx_ud
- {
- 	udc_clear_mask_UDCCR(UDCCR_UDE);
- 
--#ifdef	CONFIG_ARCH_PXA
--        /* Enable clock for USB device */
--	clk_enable(dev->clk);
--#endif
--
- 	/* try to clear these bits before we enable the udc */
- 	udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
- 
-@@ -1286,7 +1292,7 @@ fail:
- 	 * for set_configuration as well as eventual disconnect.
- 	 */
- 	DMSG("registered gadget driver '%s'\n", driver->driver.name);
--	pullup(dev, 1);
-+	pullup(dev);
- 	dump_state(dev);
- 	return 0;
- }
-@@ -1329,7 +1335,8 @@ int usb_gadget_unregister_driver(struct 
- 		return -EINVAL;
- 
- 	local_irq_disable();
--	pullup(dev, 0);
-+	dev->pullup = 0;
-+	pullup(dev);
- 	stop_activity(dev, driver);
- 	local_irq_enable();
- 
-@@ -2131,13 +2138,11 @@ static int __init pxa2xx_udc_probe(struc
- 	if (irq < 0)
- 		return -ENODEV;
- 
--#ifdef	CONFIG_ARCH_PXA
- 	dev->clk = clk_get(&pdev->dev, "UDCCLK");
- 	if (IS_ERR(dev->clk)) {
- 		retval = PTR_ERR(dev->clk);
- 		goto err_clk;
- 	}
--#endif
- 
- 	pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
- 		dev->has_cfr ? "" : " (!cfr)",
-@@ -2250,10 +2255,8 @@ lubbock_fail0:
- 	if (dev->mach->gpio_vbus)
- 		gpio_free(dev->mach->gpio_vbus);
-  err_gpio_vbus:
--#ifdef	CONFIG_ARCH_PXA
- 	clk_put(dev->clk);
-  err_clk:
--#endif
- 	return retval;
- }
- 
-@@ -2269,7 +2272,9 @@ static int __exit pxa2xx_udc_remove(stru
- 	if (dev->driver)
- 		return -EBUSY;
- 
--	udc_disable(dev);
-+	dev->pullup = 0;
-+	pullup(dev);
-+
- 	remove_proc_files();
- 
- 	if (dev->got_irq) {
-@@ -2289,9 +2294,7 @@ static int __exit pxa2xx_udc_remove(stru
- 	if (dev->mach->gpio_pullup)
- 		gpio_free(dev->mach->gpio_pullup);
- 
--#ifdef	CONFIG_ARCH_PXA
- 	clk_put(dev->clk);
--#endif
- 
- 	platform_set_drvdata(pdev, NULL);
- 	the_controller = NULL;
-@@ -2317,10 +2320,15 @@ static int __exit pxa2xx_udc_remove(stru
- static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
- {
- 	struct pxa2xx_udc	*udc = platform_get_drvdata(dev);
-+	unsigned long flags;
- 
- 	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
- 		WARN("USB host won't detect disconnect!\n");
--	pullup(udc, 0);
-+	udc->suspended = 1;
-+
-+	local_irq_save(flags);
-+	pullup(udc);
-+	local_irq_restore(flags);
- 
- 	return 0;
- }
-@@ -2328,8 +2336,12 @@ static int pxa2xx_udc_suspend(struct pla
- static int pxa2xx_udc_resume(struct platform_device *dev)
- {
- 	struct pxa2xx_udc	*udc = platform_get_drvdata(dev);
-+	unsigned long flags;
- 
--	pullup(udc, 1);
-+	udc->suspended = 0;
-+	local_irq_save(flags);
-+	pullup(udc);
-+	local_irq_restore(flags);
- 
- 	return 0;
- }
---- g26.orig/drivers/usb/gadget/pxa2xx_udc.h	2008-02-19 12:47:06.000000000 -0800
-+++ g26/drivers/usb/gadget/pxa2xx_udc.h	2008-02-19 12:57:42.000000000 -0800
-@@ -119,7 +119,9 @@ struct pxa2xx_udc {
- 						has_cfr : 1,
- 						req_pending : 1,
- 						req_std : 1,
--						req_config : 1;
-+						req_config : 1,
-+						suspended : 1,
-+						active : 1;
- 
- #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
- 	struct timer_list			timer;
--
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/pxa_fb_overlay.patch b/packages/kexecboot/linux-kexecboot-2.6.24/pxa_fb_overlay.patch
deleted file mode 100644
index 49c59b3275..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/pxa_fb_overlay.patch
+++ /dev/null
@@ -1,26 +0,0 @@
----
- drivers/video/pxafb.h |    4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-Index: linux-2.6.22/drivers/video/pxafb.h
-===================================================================
---- linux-2.6.22.orig/drivers/video/pxafb.h	2007-09-25 15:44:42.000000000 +0200
-+++ linux-2.6.22/drivers/video/pxafb.h	2007-09-25 15:45:07.000000000 +0200
-@@ -36,7 +36,7 @@
- 	struct fb_bitfield	transp;
- };
- 
--#ifdef CONFIG_PXA27x
-+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- /* PXA Overlay Framebuffer Support */
- struct overlayfb_info
- {
-@@ -142,7 +142,7 @@
- 	wait_queue_head_t	ctrlr_wait;
- 	struct work_struct	task;
- 
--#ifdef CONFIG_PXA27x
-+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- 	/* PXA Overlay Framebuffer Support */
- 	struct overlayfb_info  *overlay1fb;
- 	struct overlayfb_info  *overlay2fb;
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/pxafb.patch b/packages/kexecboot/linux-kexecboot-2.6.24/pxafb.patch
deleted file mode 100644
index 7fe693cd91..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/pxafb.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.23/drivers/video/pxafb.c
-===================================================================
---- linux-2.6.23.orig/drivers/video/pxafb.c	2008-01-25 16:25:21.000000000 -0800
-+++ linux-2.6.23/drivers/video/pxafb.c	2008-01-25 16:32:14.000000000 -0800
-@@ -1194,7 +1194,7 @@
- 		if ((clkinfo->old == 13000))
- 			break;
- 
--		pcd = get_pcd(fbi->fb.var.pixclock);
-+		pcd = get_pcd(fbi,fbi->fb.var.pixclock);
- 		lccr3 = fbi->reg_lccr3;
- 		set_hsync_time(fbi, pcd);
- 		fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch b/packages/kexecboot/linux-kexecboot-2.6.24/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
deleted file mode 100644
index b513ba1466..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-
-From: Petr Vandrovec <vandrove@vc.cvut.cz>
-
-Patch below adds support for using different prescaler than 16 for 16c950
-chips.  This is needed for using Fujitsu-Siemens Connect2Air compact-flash
-card, which comes (apparently) with 806kHz clocks, and so you have to
-program prescaler for division by 7, and DLAB to 1, to get 115200Bd.  
-
-To get card properly running you also have to add lines below to
-/etc/pcmcia/serial.opts so kernel knows that base speed is not 115200 but
-50400 (50400 * 16 = 806400; 806400 / 7 = 115200).  As I've found no code
-specifying baud_rate in serial_cs, I assume that specifying it in
-serial.opts is right way to do this type of things.
-
-Patch also fixes problem that for UPF_MAGIC_MULTIPLIER maximum possible
-baud rate passed to uart code was uartclk / 16 while correct value for
-these devices (and for 16c950) is uartclk / 4.
-
-Patch also fixes problem that for UPF_MAGIC_MULTIPLIER devices with
-baud_rate 19200 or 9600 spd_cust did not work correctly.  Not that such
-devices exist, but we should not ignore spd_cust, user probably knows why
-he asked for spd_cust.
-
-serial.opts:
-
-case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in
-'0279,950b-2-GPRS Modem---')
-    SERIAL_OPTS="baud_base 50400"
-    ;;
-esac
-
-Cc: David Woodhouse <dwmw2@infradead.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
----
-
- drivers/serial/8250.c |   82 +++++++++++++++++++++++++++++++++++++++-----------
- 1 file changed, 64 insertions(+), 18 deletions(-)
-
-Index: linux-2.6.21/drivers/serial/8250.c
-===================================================================
---- linux-2.6.21.orig/drivers/serial/8250.c	2007-07-01 16:59:52.000000000 +0100
-+++ linux-2.6.21/drivers/serial/8250.c	2007-07-01 17:01:21.000000000 +0100
-@@ -1964,24 +1964,58 @@ static void serial8250_shutdown(struct u
- 		serial_unlink_irq_chain(up);
- }
- 
--static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
-+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud,
-+					   unsigned int *prescaler)
- {
--	unsigned int quot;
--
--	/*
--	 * Handle magic divisors for baud rates above baud_base on
--	 * SMSC SuperIO chips.
-+        /*
-+	 * Use special handling only if user did not supply its own divider.
-+	 * spd_cust is defined in terms of baud_base, so always use default
-+	 * prescaler when spd_cust is requested.
- 	 */
--	if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
--	    baud == (port->uartclk/4))
--		quot = 0x8001;
--	else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
--		 baud == (port->uartclk/8))
--		quot = 0x8002;
--	else
--		quot = uart_get_divisor(port, baud);
- 
--	return quot;
-+	*prescaler = 16;
-+        if (baud != 38400 || (port->flags & UPF_SPD_MASK) != UPF_SPD_CUST) {
-+		unsigned int quot = port->uartclk / baud;
-+
-+		/*
-+		 * Handle magic divisors for baud rates above baud_base on
-+		 * SMSC SuperIO chips.
-+		 */
-+		if (port->flags & UPF_MAGIC_MULTIPLIER) {
-+			if (quot == 4) {
-+				return 0x8001;
-+			} else if (quot == 8) {
-+				return 0x8002;
-+			}
-+		}
-+		if (port->type == PORT_16C950) {
-+			/*
-+			 * This computes TCR value (4 to 16), not CPR value (which can
-+			 * be between 1.000 and 31.875) - chip I have uses XTAL of
-+			 * 806400Hz, and so a division by 7 is required to get 115200Bd.
-+			 * I'm leaving CPR disabled for now, until someone will
-+			 * hit even more exotic XTAL (it is needed to get 500kbps
-+			 * or 1000kbps from 18.432MHz XTAL, but I have no device
-+			 * which would benefit from doing that).
-+			 *
-+			 * If we can use divide by 16, use it.  Otherwise look for
-+			 * better prescaler, from 15 to 4.  If quotient cannot
-+			 * be divided by any integer value between 4 and 15, use 4.
-+			 */
-+			if (quot & 0x0F) {
-+				unsigned int div;
-+
-+				for (div = 15; div > 4; div--) {
-+					if (quot % div == 0) {
-+						break;
-+					}
-+				}
-+				*prescaler = div;
-+				return quot / div;
-+			}
-+		}
-+	}
-+	return uart_get_divisor(port, baud);
- }
- 
- static void
-@@ -1991,7 +2025,7 @@ serial8250_set_termios(struct uart_port 
- 	struct uart_8250_port *up = (struct uart_8250_port *)port;
- 	unsigned char cval, fcr = 0;
- 	unsigned long flags;
--	unsigned int baud, quot;
-+	unsigned int baud, quot, prescaler;
- 
- 	switch (termios->c_cflag & CSIZE) {
- 	case CS5:
-@@ -2023,8 +2057,13 @@ serial8250_set_termios(struct uart_port 
- 	/*
- 	 * Ask the core to calculate the divisor for us.
- 	 */
--	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
--	quot = serial8250_get_divisor(port, baud);
-+	if (port->type == PORT_16C950 || (port->flags & UPF_MAGIC_MULTIPLIER)) {
-+		baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
-+	} else {
-+		baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+	}
-+	quot = serial8250_get_divisor(port, baud, &prescaler);
-+
- 
- 	/*
- 	 * Oxford Semi 952 rev B workaround
-@@ -2139,6 +2178,13 @@ serial8250_set_termios(struct uart_port 
- 	serial_dl_write(up, quot);
- 
- 	/*
-+	 * Program prescaler for 16C950 chips.
-+	 */
-+	if (up->port.type == PORT_16C950) {
-+		serial_icr_write(up, UART_TCR, prescaler == 16 ? 0 : prescaler);
-+	}
-+
-+	/*
- 	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
- 	 * is written without DLAB set, this mode will be disabled.
- 	 */
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/sharpsl-rc-r1.patch b/packages/kexecboot/linux-kexecboot-2.6.24/sharpsl-rc-r1.patch
deleted file mode 100644
index bed41c55d5..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/sharpsl-rc-r1.patch
+++ /dev/null
@@ -1,527 +0,0 @@
-This patch adds support for Sharp CE-RH2 on Spitz.
-
-It is not clean enough to be upstreamed:
-- It is a bit syslog-noisy.
-- Does not support other Zaurus models.
-- Maybe split to more parts:
-  * MAX1111 driver
-  * linear input device
-  * virtual keyboard on top of linear input device
-
-Index: linux-2.6.24/arch/arm/mach-pxa/spitz.c
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/spitz.c	2008-03-10 17:05:37.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/spitz.c	2008-03-10 17:05:55.000000000 +0000
-@@ -259,6 +259,13 @@
- 	.id		= -1,
- };
- 
-+/*
-+ * Spitz Remote Control Device
-+ */
-+static struct platform_device sharpsl_rc_device = {
-+	.name		= "sharpsl-remote-control",
-+	.id		= -1,
-+};
- 
- /*
-  * Spitz LEDs
-@@ -548,6 +555,7 @@
- 	&spitzscoop_device,
- 	&spitzssp_device,
- 	&spitzkbd_device,
-+	&sharpsl_rc_device,
- 	&spitzts_device,
- 	&spitzbl_device,
- 	&spitzled_device,
-Index: linux-2.6.24/drivers/input/keyboard/Kconfig
-===================================================================
---- linux-2.6.24.orig/drivers/input/keyboard/Kconfig	2008-03-10 17:05:40.000000000 +0000
-+++ linux-2.6.24/drivers/input/keyboard/Kconfig	2008-03-10 17:05:55.000000000 +0000
-@@ -154,6 +154,17 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called spitzkbd.
- 
-+config SHARPSL_RC
-+	tristate "Sharp SL-Cxx00 Remote Control"
-+	depends on PXA_SHARPSL
-+	default y
-+	help
-+	  Say Y here to enable the remote on the Sharp Zaurus SL-Cxx00,
-+	  SL-C1000, SL-C3000 and Sl-C3100 series of PDAs.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called sharpsl_rc.
-+
- config KEYBOARD_AMIGA
- 	tristate "Amiga keyboard"
- 	depends on AMIGA
-Index: linux-2.6.24/drivers/input/keyboard/Makefile
-===================================================================
---- linux-2.6.24.orig/drivers/input/keyboard/Makefile	2008-03-10 17:05:40.000000000 +0000
-+++ linux-2.6.24/drivers/input/keyboard/Makefile	2008-03-10 17:06:17.000000000 +0000
-@@ -26,3 +26,5 @@
- obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
- obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
- obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
-+obj-$(CONFIG_SHARPSL_RC)		+= sharpsl_rc.o
-+
-Index: linux-2.6.24/drivers/input/keyboard/sharpsl_rc.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/input/keyboard/sharpsl_rc.c	2008-03-10 17:05:55.000000000 +0000
-@@ -0,0 +1,291 @@
-+/*
-+ *  Keyboard driver for Sharp Clamshell Models (SL-Cxx00)
-+ *
-+ *  Copyright (c) 2004-2005 Richard Purdie
-+ *
-+ *  Based on corgikbd.c and Sharp's RC driver
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#define DEBUG 1
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/jiffies.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+
-+#ifdef CONFIG_MACH_SPITZ
-+#include <asm/arch/spitz.h>
-+#endif
-+#ifdef CONFIG_MACH_CORGI
-+#include <asm/arch/corgi.h>
-+#endif
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/hardware/scoop.h>
-+#include <asm/arch/sharpsl.h>
-+#include <asm/hardware/sharpsl_pm.h>
-+
-+#define DPRINTK(fmt, args...) dev_dbg(data->dev, fmt "\n", ##args)
-+
-+struct remote_control_key {
-+	unsigned char min;
-+	unsigned char max;
-+	unsigned char key;
-+};
-+
-+#ifdef CONFIG_MACH_SPITZ
-+#define REMOTE_AKIN_PULLUP SPITZ_SCP2_AKIN_PULLUP
-+#define REMOTE_SCOOP_DEVICE spitzscoop2_device
-+#define REMOTE_GPIO_INT SPITZ_GPIO_AK_INT
-+#define REMOTE_IRQ_INT SPITZ_IRQ_GPIO_AK_INT
-+static struct remote_control_key remote_keys[] = {
-+	{ 25, 35, KEY_STOPCD},
-+	{ 55, 65, KEY_PLAYPAUSE},
-+	{ 85, 95, KEY_NEXTSONG},
-+	{ 115, 125, KEY_VOLUMEUP},
-+	{ 145, 155, KEY_PREVIOUSSONG},
-+	{ 180, 190, KEY_MUTE},
-+	{ 215, 225, KEY_VOLUMEDOWN},
-+};
-+#endif
-+#ifdef CONFIG_MACH_CORGI
-+#define REMOTE_AKIN_PULLUP CORGI_SCP_AKIN_PULLUP
-+#define REMOTE_SCOOP_DEVICE corgiscoop_device
-+#define REMOTE_GPIO_INT CORGI_GPIO_AK_INT
-+#define REMOTE_IRQ_INT CORGI_IRQ_GPIO_AK_INT
-+static struct remote_control_key remote_keys[] = {
-+    //These need to be fixed for the CE-RH1's values
-+	{ 25, 35, KEY_STOPCD},
-+	{ 55, 65, KEY_PLAYPAUSE},
-+	{ 85, 95, KEY_NEXTSONG},
-+	{ 115, 125, KEY_VOLUMEUP},
-+	{ 145, 155, KEY_PREVIOUSSONG},
-+	{ 180, 190, KEY_MUTE},
-+	{ 215, 225, KEY_VOLUMEDOWN},
-+};
-+#endif
-+
-+#define RELEASE_HI      230
-+#define MAX_EARPHONE    6
-+#define RC_POLL_MS      10
-+#define RC_FINISH_MS    500
-+#define WAIT_STATE      3
-+#define NOISE_THRESHOLD 100
-+
-+struct sharpsl_rc {
-+	struct input_dev *input;
-+	struct device *dev;
-+
-+	spinlock_t lock;
-+	struct timer_list rctimer;
-+	struct timer_list rctimer_finish;
-+
-+	unsigned int handling_press;
-+	unsigned int noise;
-+	unsigned int state;
-+	unsigned int last_key;
-+};
-+
-+static int get_remocon_raw(void)
-+{
-+	int i, val;
-+
-+	val = sharpsl_pm_pxa_read_max1111(MAX1111_REMCOM);
-+	for (i = 0; i < ARRAY_SIZE(remote_keys); ++i) {
-+		if (val >= remote_keys[i].min
-+			&& val <= remote_keys[i].max) {
-+			printk("get_remocon_raw: VAL=%i, KEY=%i\n", val, remote_keys[i].key);
-+			return remote_keys[i].key;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static irqreturn_t sharpsl_rc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct sharpsl_rc *data = dev_id;
-+	DPRINTK("sharpsl_rc_interrupt %d\n", irq);
-+	if (!data->handling_press) {
-+		DPRINTK("handling interrupt");
-+		data->handling_press = 1;
-+		data->noise = 0;
-+		data->state = 0;
-+		data->last_key = 0;
-+
-+		reset_scoop_gpio(&REMOTE_SCOOP_DEVICE.dev, REMOTE_AKIN_PULLUP);
-+
-+		mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS));
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static void sharpsl_rc_timer_callback(unsigned long dataPtr)
-+{
-+	struct sharpsl_rc *data = (struct sharpsl_rc *) dataPtr;
-+	int timer = 1;
-+	int key = get_remocon_raw();
-+	DPRINTK("timer callback, key: %d", key);
-+
-+	//wait for value to stabilize
-+	if (data->state < WAIT_STATE) {
-+		if (data->last_key != key) {
-+			++data->noise;
-+			if (data->noise > NOISE_THRESHOLD) {
-+				DPRINTK("too much noise, bailing");
-+				timer = 0;
-+			}
-+			data->state = 0;
-+		} else {
-+			++data->state;
-+		}
-+		data->last_key = key;
-+
-+	//stable value, send event
-+	} else if (data->state == WAIT_STATE) {
-+		data->noise = 0;
-+		//non-key returned, skip the rest of the states and bail now
-+		if (data->last_key == 0) {
-+			DPRINTK("non-key detected %d, noise: %d", data->last_key, data->noise);
-+			timer = 0;
-+		//send button press
-+		} else {
-+			DPRINTK("key press detected %d, noise %d", data->last_key, data->noise);
-+			input_report_key(data->input, data->last_key, 1);
-+		}
-+		++data->state;
-+
-+	//wait until key is released
-+	} else if (data->state < WAIT_STATE * 2) {
-+		if (key == data->last_key
-+			&& data->noise < NOISE_THRESHOLD) {
-+			data->state = WAIT_STATE + 1;
-+			++data->noise;
-+		} else {
-+			++data->state;
-+		}
-+	//key is released, send event
-+	} else {
-+		//send button release
-+		DPRINTK("release key %d", data->last_key);
-+		input_report_key(data->input, data->last_key, 0);
-+		timer = 0;
-+	}
-+	if (timer) {
-+		mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS));
-+	} else {
-+		set_scoop_gpio(&REMOTE_SCOOP_DEVICE.dev, REMOTE_AKIN_PULLUP);
-+		data->handling_press = 0;
-+	}
-+}
-+
-+static int __init sharpsl_rc_probe(struct platform_device *pdev)
-+{
-+	struct sharpsl_rc *sharpsl_rc;
-+	struct input_dev *input_dev;
-+	int i, ret;
-+
-+	dev_dbg(&pdev->dev, "sharpsl_rc_probe\n");
-+
-+	sharpsl_rc = kzalloc(sizeof(struct sharpsl_rc), GFP_KERNEL);
-+	input_dev = input_allocate_device();
-+	if (!sharpsl_rc || !input_dev) {
-+		kfree(sharpsl_rc);
-+		input_free_device(input_dev);
-+		return -ENOMEM;
-+	}
-+
-+	platform_set_drvdata(pdev, sharpsl_rc);
-+
-+	sharpsl_rc->dev = &pdev->dev;
-+	sharpsl_rc->input = input_dev;
-+	spin_lock_init(&sharpsl_rc->lock);
-+
-+	/* Init Remote Control Timer */
-+	init_timer(&sharpsl_rc->rctimer);
-+	sharpsl_rc->rctimer.function = sharpsl_rc_timer_callback;
-+	sharpsl_rc->rctimer.data = (unsigned long) sharpsl_rc;
-+
-+	input_dev->name = "Sharp Remote Control CE-RHX";
-+	input_dev->phys = "sharpsl_rc/input0";
-+	input_dev->id.bustype = BUS_HOST;
-+	input_dev->id.vendor = 0x0001;
-+	input_dev->id.product = 0x0001;
-+	input_dev->id.version = 0x0100;
-+	input_dev->cdev.dev = &pdev->dev;
-+	input_dev->private = sharpsl_rc;
-+
-+	input_dev->evbit[0] = BIT(EV_KEY);
-+
-+	for (i = 0; i <= ARRAY_SIZE(remote_keys); i++)
-+	  set_bit(remote_keys[i].key, input_dev->keybit);
-+
-+	input_register_device(sharpsl_rc->input);
-+
-+	pxa_gpio_mode(REMOTE_GPIO_INT | GPIO_IN);
-+	ret = request_irq(REMOTE_IRQ_INT,
-+					  sharpsl_rc_interrupt,
-+					  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
-+					  "sharpsl_rc",
-+					  sharpsl_rc);
-+	if (ret < 0) {
-+		dev_dbg(&pdev->dev, "Can't get IRQ: %d!\n", i);
-+		kfree(sharpsl_rc);
-+		input_free_device(input_dev);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int sharpsl_rc_remove(struct platform_device *pdev)
-+{
-+	struct sharpsl_rc *sharpsl_rc = platform_get_drvdata(pdev);
-+
-+	dev_dbg(&pdev->dev, "sharpsl_rc_remove\n");
-+
-+	free_irq(REMOTE_IRQ_INT, sharpsl_rc);
-+	del_timer_sync(&sharpsl_rc->rctimer);
-+	input_unregister_device(sharpsl_rc->input);
-+	kfree(sharpsl_rc);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver sharpsl_rc_driver = {
-+	.probe		= sharpsl_rc_probe,
-+	.remove		= sharpsl_rc_remove,
-+	.suspend	= NULL,
-+	.resume		= NULL,
-+	.driver		= {
-+		.name	= "sharpsl-remote-control",
-+	},
-+};
-+
-+static int __devinit sharpsl_rc_init(void)
-+{
-+	printk("sharpsl_rc_init\n");
-+	return platform_driver_register(&sharpsl_rc_driver);
-+}
-+
-+static void __exit sharpsl_rc_exit(void)
-+{
-+	printk("sharpsl_rc_exit\n");
-+	platform_driver_unregister(&sharpsl_rc_driver);
-+}
-+
-+module_init(sharpsl_rc_init);
-+module_exit(sharpsl_rc_exit);
-+
-+MODULE_AUTHOR("Justin Patrin <papercrane@reversefold.com>");
-+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
-+MODULE_DESCRIPTION("SharpSL Remote Control Driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.24/drivers/input/keyboard/spitzkbd.c
-===================================================================
---- linux-2.6.24.orig/drivers/input/keyboard/spitzkbd.c	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/drivers/input/keyboard/spitzkbd.c	2008-03-10 17:05:55.000000000 +0000
-@@ -19,6 +19,7 @@
- #include <linux/jiffies.h>
- #include <linux/module.h>
- #include <linux/slab.h>
-+#include <linux/kmod.h>
- 
- #include <asm/arch/spitz.h>
- #include <asm/arch/hardware.h>
-@@ -279,13 +280,21 @@
- static int sharpsl_hinge_state;
- static int hinge_count;
- 
-+void spitzkbd_handle_sharpsl_rc(void *arg) {
-+	request_module("sharpsl_rc");
-+}
-+
-+DECLARE_WORK(spitzkbd_work, spitzkbd_handle_sharpsl_rc);
-+
- static void spitzkbd_hinge_timer(unsigned long data)
- {
- 	struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
- 	unsigned long state;
- 	unsigned long flags;
-+	unsigned int headphone, remote;
- 
- 	state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB));
-+	state |= (GPLR(SPITZ_GPIO_HP_IN) & GPIO_bit(SPITZ_GPIO_HP_IN));
- 	state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT));
- 	if (state != sharpsl_hinge_state) {
- 		hinge_count = 0;
-@@ -299,9 +308,18 @@
- 
- 		input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
- 		input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
--		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
-+
-+		headphone = ((GPLR(SPITZ_GPIO_HP_IN) & GPIO_bit(SPITZ_GPIO_HP_IN)) != 0);
-+		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, headphone);
-+
-+		remote = headphone && ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) == 0);
-+		input_report_switch(spitzkbd_data->input, SW_REMOTE_INSERT, remote);
- 		input_sync(spitzkbd_data->input);
- 
-+		if (remote) {
-+			schedule_work(&spitzkbd_work);
-+		}
-+
- 		spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
- 	} else {
- 		mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
-@@ -395,6 +413,7 @@
- 	set_bit(SW_LID, input_dev->swbit);
- 	set_bit(SW_TABLET_MODE, input_dev->swbit);
- 	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
-+	set_bit(SW_REMOTE_INSERT, input_dev->swbit);
- 
- 	err = input_register_device(input_dev);
- 	if (err)
-@@ -432,9 +451,12 @@
- 	request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
- 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- 		    "Spitzkbd SWB", spitzkbd);
--	request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
-+	request_irq(SPITZ_IRQ_GPIO_HP_IN, spitzkbd_hinge_isr,
- 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- 		    "Spitzkbd HP", spitzkbd);
-+  	request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
-+ 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
-+            "Spitzkbd HP Type", spitzkbd);
- 
- 	return 0;
- 
-@@ -455,6 +477,7 @@
- 	free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
- 	free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
- 	free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
-+	free_irq(SPITZ_IRQ_GPIO_HP_IN, spitzkbd);
- 	free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd);
- 
- 	del_timer_sync(&spitzkbd->htimer);
-Index: linux-2.6.24/arch/arm/mach-pxa/sharpsl.h
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/sharpsl.h	2008-03-10 17:05:35.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/sharpsl.h	2008-03-10 17:05:55.000000000 +0000
-@@ -37,15 +37,10 @@
-  */
- #define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
- 
--/* MAX1111 Channel Definitions */
--#define MAX1111_BATT_VOLT   4u
--#define MAX1111_BATT_TEMP   2u
--#define MAX1111_ACIN_VOLT   6u
--
- extern struct battery_thresh spitz_battery_levels_acin[];
- extern struct battery_thresh spitz_battery_levels_noac[];
- void sharpsl_pm_pxa_init(void);
- void sharpsl_pm_pxa_remove(void);
--int sharpsl_pm_pxa_read_max1111(int channel);
-+
- 
- 
-Index: linux-2.6.24/arch/arm/mach-pxa/sharpsl_pm.c
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/sharpsl_pm.c	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/sharpsl_pm.c	2008-03-10 17:05:55.000000000 +0000
-@@ -135,6 +135,8 @@
- 			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
- }
- 
-+EXPORT_SYMBOL(sharpsl_pm_pxa_read_max1111);
-+
- void sharpsl_pm_pxa_init(void)
- {
- 	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
-Index: linux-2.6.24/include/asm-arm/hardware/sharpsl_pm.h
-===================================================================
---- linux-2.6.24.orig/include/asm-arm/hardware/sharpsl_pm.h	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/hardware/sharpsl_pm.h	2008-03-10 17:05:55.000000000 +0000
-@@ -104,3 +104,10 @@
- irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
- irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
- 
-+/* MAX1111 Channel Definitions */
-+#define MAX1111_REMCOM      0u
-+#define MAX1111_BATT_VOLT   4u
-+#define MAX1111_BATT_TEMP   2u
-+#define MAX1111_ACIN_VOLT   6u
-+
-+int sharpsl_pm_pxa_read_max1111(int channel);
-Index: linux-2.6.24/include/linux/input.h
-===================================================================
---- linux-2.6.24.orig/include/linux/input.h	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/include/linux/input.h	2008-03-10 17:05:55.000000000 +0000
-@@ -636,6 +636,7 @@
- #define SW_TABLET_MODE		0x01  /* set = tablet mode */
- #define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
- #define SW_RADIO		0x03  /* set = radio enabled */
-+#define SW_REMOTE_INSERT	0x04  /* set = remote */
- #define SW_MAX			0x0f
- #define SW_CNT			(SW_MAX+1)
- 
-Index: linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/spitz_pm.c	2008-03-10 17:05:40.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c	2008-03-10 17:05:55.000000000 +0000
-@@ -162,6 +162,13 @@
- 	if (resume_on_alarm && (PEDR & PWER_RTC))
- 		is_resume |= PWER_RTC;
- 
-+	printk("wakeup: PEDR: %x, PKSR: %x, HP_IN: %x, AK_INT: %x\n", PEDR, PKSR, GPIO_bit(SPITZ_GPIO_HP_IN), GPIO_bit(SPITZ_GPIO_AK_INT));
-+
-+	//remote/headphone interrupt, wakeup
-+	if (PEDR == 0 && (PKSR & 0xc0d01) != 0) {
-+		is_resume |= PWER_RTC;
-+	}
-+
- 	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
- 	return is_resume;
- }
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/sharpsl-rc-r2.patch b/packages/kexecboot/linux-kexecboot-2.6.24/sharpsl-rc-r2.patch
deleted file mode 100644
index 6fb34ec179..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/sharpsl-rc-r2.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-This patch adds support for Sharp CE-RH2 on Akita and CE-RH1 on C7x0.
-
-This patch is a bit ugly:
-- Device specific functions should be moved to platform infrastructure.
-- Maybe define generic *_scoopexp functions handling Akita x Spitz differences.
-
-Index: linux-2.6.24/drivers/input/keyboard/sharpsl_rc.c
-===================================================================
---- linux-2.6.24.orig/drivers/input/keyboard/sharpsl_rc.c	2008-03-08 19:29:02.000000000 +0000
-+++ linux-2.6.24/drivers/input/keyboard/sharpsl_rc.c	2008-03-08 22:23:35.000000000 +0000
-@@ -21,12 +21,10 @@
- #include <linux/module.h>
- #include <linux/slab.h>
- 
--#ifdef CONFIG_MACH_SPITZ
-+#include <asm/mach-types.h>
- #include <asm/arch/spitz.h>
--#endif
--#ifdef CONFIG_MACH_CORGI
-+#include <asm/arch/akita.h>
- #include <asm/arch/corgi.h>
--#endif
- 
- #include <asm/arch/hardware.h>
- #include <asm/arch/pxa-regs.h>
-@@ -42,12 +40,8 @@
- 	unsigned char key;
- };
- 
--#ifdef CONFIG_MACH_SPITZ
--#define REMOTE_AKIN_PULLUP SPITZ_SCP2_AKIN_PULLUP
--#define REMOTE_SCOOP_DEVICE spitzscoop2_device
--#define REMOTE_GPIO_INT SPITZ_GPIO_AK_INT
--#define REMOTE_IRQ_INT SPITZ_IRQ_GPIO_AK_INT
--static struct remote_control_key remote_keys[] = {
-+static struct remote_control_key remote_keys_spitz[] = {
-+	/* CE-RH2 values */
- 	{ 25, 35, KEY_STOPCD},
- 	{ 55, 65, KEY_PLAYPAUSE},
- 	{ 85, 95, KEY_NEXTSONG},
-@@ -56,23 +50,15 @@
- 	{ 180, 190, KEY_MUTE},
- 	{ 215, 225, KEY_VOLUMEDOWN},
- };
--#endif
--#ifdef CONFIG_MACH_CORGI
--#define REMOTE_AKIN_PULLUP CORGI_SCP_AKIN_PULLUP
--#define REMOTE_SCOOP_DEVICE corgiscoop_device
--#define REMOTE_GPIO_INT CORGI_GPIO_AK_INT
--#define REMOTE_IRQ_INT CORGI_IRQ_GPIO_AK_INT
--static struct remote_control_key remote_keys[] = {
--    //These need to be fixed for the CE-RH1's values
--	{ 25, 35, KEY_STOPCD},
--	{ 55, 65, KEY_PLAYPAUSE},
--	{ 85, 95, KEY_NEXTSONG},
--	{ 115, 125, KEY_VOLUMEUP},
--	{ 145, 155, KEY_PREVIOUSSONG},
--	{ 180, 190, KEY_MUTE},
--	{ 215, 225, KEY_VOLUMEDOWN},
-+static struct remote_control_key remote_keys_corgi[] = {
-+	/* CE-RH1 values */
-+	{ 27, 35, KEY_STOPCD},
-+	{ 7, 13, KEY_PLAYPAUSE},
-+	{ 77, 93, KEY_NEXTSONG},
-+	{ 115, 132, KEY_VOLUMEUP},
-+	{ 46, 58, KEY_PREVIOUSSONG},
-+	{ 170, 186, KEY_VOLUMEDOWN},
- };
--#endif
- 
- #define RELEASE_HI      230
- #define MAX_EARPHONE    6
-@@ -98,9 +84,17 @@
- static int get_remocon_raw(void)
- {
- 	int i, val;
-+	struct remote_control_key *remote_keys;
-+
-+	if (machine_is_borzoi() || machine_is_spitz() || machine_is_akita())
-+		remote_keys = remote_keys_spitz;
-+	else
-+		remote_keys = remote_keys_corgi;
- 
- 	val = sharpsl_pm_pxa_read_max1111(MAX1111_REMCOM);
--	for (i = 0; i < ARRAY_SIZE(remote_keys); ++i) {
-+	for (i = 0; i < (machine_is_borzoi() || machine_is_spitz() || machine_is_akita() ?
-+			 ARRAY_SIZE(remote_keys_spitz) : ARRAY_SIZE(remote_keys_corgi));
-+			 ++i) {
- 		if (val >= remote_keys[i].min
- 			&& val <= remote_keys[i].max) {
- 			printk("get_remocon_raw: VAL=%i, KEY=%i\n", val, remote_keys[i].key);
-@@ -121,8 +115,12 @@
- 		data->state = 0;
- 		data->last_key = 0;
- 
--		reset_scoop_gpio(&REMOTE_SCOOP_DEVICE.dev, REMOTE_AKIN_PULLUP);
--
-+		if (machine_is_borzoi() || machine_is_spitz())
-+			reset_scoop_gpio(platform_scoop_config->devs[1].dev, SPITZ_SCP2_AKIN_PULLUP);
-+		else if (machine_is_akita())
-+            		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_AKIN_PULLUP);
-+		else
-+			reset_scoop_gpio(platform_scoop_config->devs[0].dev, CORGI_SCP_AKIN_PULLUP);
- 		mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS));
- 	}
- 	return IRQ_HANDLED;
-@@ -182,7 +180,12 @@
- 	if (timer) {
- 		mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS));
- 	} else {
--		set_scoop_gpio(&REMOTE_SCOOP_DEVICE.dev, REMOTE_AKIN_PULLUP);
-+		if (machine_is_borzoi() || machine_is_spitz())
-+			set_scoop_gpio(platform_scoop_config->devs[1].dev, SPITZ_SCP2_AKIN_PULLUP);
-+		else if (machine_is_akita())
-+            		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_AKIN_PULLUP);
-+		else
-+			set_scoop_gpio(platform_scoop_config->devs[0].dev, CORGI_SCP_AKIN_PULLUP);
- 		data->handling_press = 0;
- 	}
- }
-@@ -192,6 +195,7 @@
- 	struct sharpsl_rc *sharpsl_rc;
- 	struct input_dev *input_dev;
- 	int i, ret;
-+	struct remote_control_key *remote_keys;
- 
- 	dev_dbg(&pdev->dev, "sharpsl_rc_probe\n");
- 
-@@ -225,17 +229,32 @@
- 
- 	input_dev->evbit[0] = BIT(EV_KEY);
- 
--	for (i = 0; i <= ARRAY_SIZE(remote_keys); i++)
-+	if (machine_is_borzoi() || machine_is_spitz() || machine_is_akita())
-+		remote_keys = remote_keys_spitz;
-+	else
-+		remote_keys = remote_keys_corgi;
-+	for (i = 0; i < (machine_is_borzoi() || machine_is_spitz() || machine_is_akita() ?
-+			 ARRAY_SIZE(remote_keys_spitz) : ARRAY_SIZE(remote_keys_corgi));
-+			 ++i)
- 	  set_bit(remote_keys[i].key, input_dev->keybit);
- 
- 	input_register_device(sharpsl_rc->input);
- 
--	pxa_gpio_mode(REMOTE_GPIO_INT | GPIO_IN);
--	ret = request_irq(REMOTE_IRQ_INT,
--					  sharpsl_rc_interrupt,
--					  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
--					  "sharpsl_rc",
--					  sharpsl_rc);
-+	if (machine_is_borzoi() || machine_is_spitz() || machine_is_akita()) {
-+		pxa_gpio_mode(SPITZ_GPIO_AK_INT | GPIO_IN);
-+		ret = request_irq(SPITZ_IRQ_GPIO_AK_INT,
-+				  sharpsl_rc_interrupt,
-+				  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
-+				  "sharpsl_rc",
-+				  sharpsl_rc);
-+	} else {
-+		pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN);
-+		ret = request_irq(CORGI_IRQ_GPIO_AK_INT,
-+				  sharpsl_rc_interrupt,
-+				  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
-+				  "sharpsl_rc",
-+				  sharpsl_rc);
-+	}
- 	if (ret < 0) {
- 		dev_dbg(&pdev->dev, "Can't get IRQ: %d!\n", i);
- 		kfree(sharpsl_rc);
-@@ -252,7 +271,10 @@
- 
- 	dev_dbg(&pdev->dev, "sharpsl_rc_remove\n");
- 
--	free_irq(REMOTE_IRQ_INT, sharpsl_rc);
-+	if (machine_is_borzoi() || machine_is_spitz() || machine_is_akita())
-+		free_irq(SPITZ_IRQ_GPIO_AK_INT, sharpsl_rc);
-+	else
-+		free_irq(CORGI_IRQ_GPIO_AK_INT, sharpsl_rc);
- 	del_timer_sync(&sharpsl_rc->rctimer);
- 	input_unregister_device(sharpsl_rc->input);
- 	kfree(sharpsl_rc);
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/spitz/defconfig b/packages/kexecboot/linux-kexecboot-2.6.24/spitz/defconfig
deleted file mode 100644
index eab0e478d8..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/spitz/defconfig
+++ /dev/null
@@ -1,1239 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Feb  1 20:48:10 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_PXA_SHARPSL_25x is not set
-CONFIG_PXA_SHARPSL_27x=y
-# CONFIG_MACH_HTCUNIVERSAL is not set
-CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
-CONFIG_MACH_BORZOI=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_POWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_SHARPSL_RC=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_LCD_QVGA=y
-# CONFIG_FB_PXA_LCD_VGA is not set
-CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
-CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=m
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_SPITZ=y
-# CONFIG_LEDS_TOSA is not set
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/spitz_h_rewrite.patch b/packages/kexecboot/linux-kexecboot-2.6.24/spitz_h_rewrite.patch
deleted file mode 100644
index df6d5f66c2..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/spitz_h_rewrite.patch
+++ /dev/null
@@ -1,497 +0,0 @@
-http://www.uwsg.indiana.edu/hypermail/linux/kernel/0802.1/3541.html
-
-Here is a rewrite of spitz.h, which includes comments documenting
-function of particular GPIO pins.
-
-spitz_h_rewrite.patch provides:
-- no changes in compiled code
-- partial spitz.h rewrite:
-  * organized by function
-  * describes complete GPIO pinout
-  * comments added
-  * removed defines cloning pxa-regs.h
-- prefer generic pxa-regs.h GPIO if available
-- use GPIO names instead of numbers
-
-Thanks to Trisoft for providing needed information.
-
-Index: linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/spitz_pm.c	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c	2008-02-13 13:49:22.000000000 +0000
-@@ -110,9 +110,9 @@
- 	pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH);
- 
- 	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
--	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
--	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
--	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-+	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST);
-+	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST) | PWER_RTC;
-+	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST);
- 	PKSR = 0xffffffff; // clear
- 
- 	/* nRESET_OUT Disable */
-@@ -128,7 +128,7 @@
- static void spitz_postsuspend(void)
- {
- 	pxa_gpio_mode(GPIO18_RDY_MD);
--	pxa_gpio_mode(10 | GPIO_IN);
-+	pxa_gpio_mode(SPITZ_GPIO_NC_10 | GPIO_IN);
- }
- 
- static int spitz_should_wakeup(unsigned int resume_on_alarm)
-Index: linux-2.6.24/drivers/video/pxafb.c
-===================================================================
---- linux-2.6.24.orig/drivers/video/pxafb.c	2008-02-13 13:49:04.000000000 +0000
-+++ linux-2.6.24/drivers/video/pxafb.c	2008-02-13 13:49:57.000000000 +0000
-@@ -920,7 +920,7 @@
- 		return;
-         }
- 
--	for (gpio = 58; ldd_bits > 0; gpio++, ldd_bits--) {
-+	for (gpio = GPIO58_LDD_0; ldd_bits > 0; gpio++, ldd_bits--) {
- 		pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
- 	}
- 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
-Index: linux-2.6.24/include/asm-arm/arch-pxa/akita.h
-===================================================================
---- linux-2.6.24.orig/include/asm-arm/arch-pxa/akita.h	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/akita.h	2008-02-13 13:49:22.000000000 +0000
-@@ -12,11 +12,11 @@
- /* Akita IO Expander GPIOs */
- 
- #define AKITA_IOEXP_RESERVED_7      (1 << 7)
--#define AKITA_IOEXP_IR_ON           (1 << 6)
--#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
--#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
--#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
--#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
-+#define AKITA_IOEXP_IR_ON           (1 << 6)	/* IrDA On */
-+#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)	/* Pull-Up for Remote */
-+#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)	/* Backlight Control */
-+#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)	/* Backlight On */
-+#define AKITA_IOEXP_MIC_BIAS        (1 << 2)	/* Mic Bias On */
- #define AKITA_IOEXP_RESERVED_1      (1 << 1)
- #define AKITA_IOEXP_RESERVED_0      (1 << 0)
- 
-Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
-===================================================================
---- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h	2008-02-13 13:49:07.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h	2008-02-13 13:49:22.000000000 +0000
-@@ -1334,6 +1334,7 @@
- #define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
- #define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
- #define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
-+#define GPIO104_pSKTSEL		104	/* PCMCIA Socket Select (PXA27x) */
- #define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
- #define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
- #define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
-Index: linux-2.6.24/include/asm-arm/arch-pxa/spitz.h
-===================================================================
---- linux-2.6.24.orig/include/asm-arm/arch-pxa/spitz.h	2008-02-13 13:49:01.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-pxa/spitz.h	2008-02-13 13:49:22.000000000 +0000
-@@ -1,8 +1,9 @@
- /*
-- * Hardware specific definitions for SL-Cx000 series of PDAs
-+ * Hardware specific definitions for SL-Cxx00 series of PDAs
-  *
-  * Copyright (c) 2005 Alexander Wykes
-  * Copyright (c) 2005 Richard Purdie
-+ * Copyright (c) 2008 Stanislav Brabec
-  *
-  * Based on Sharp's 2.4 kernel patches
-  *
-@@ -13,140 +14,257 @@
-  */
- #ifndef __ASM_ARCH_SPITZ_H
- #define __ASM_ARCH_SPITZ_H  1
--#endif
- 
--#include <linux/fb.h>
-+#include <asm-arm/arch-pxa/irqs.h>
-+#include <linux/platform_device.h>
- 
- /* Spitz/Akita GPIOs */
- 
--#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
--#define SPITZ_GPIO_RESET           (1)
--#define SPITZ_GPIO_nSD_DETECT      (9)
--#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
--#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
--#define SPITZ_GPIO_ADS7846_CS      (14)
--#define SPITZ_GPIO_SYNC            (16)
--#define SPITZ_GPIO_MAX1111_CS      (20)
--#define SPITZ_GPIO_FATAL_BAT       (21)
--#define SPITZ_GPIO_HSYNC           (22)
--#define SPITZ_GPIO_nSD_CLK         (32)
--#define SPITZ_GPIO_USB_DEVICE      (35)
--#define SPITZ_GPIO_USB_HOST        (37)
--#define SPITZ_GPIO_USB_CONNECT     (41)
--#define SPITZ_GPIO_LCDCON_CS       (53)
--#define SPITZ_GPIO_nPCE            (54)
--#define SPITZ_GPIO_nSD_WP          (81)
--#define SPITZ_GPIO_ON_RESET        (89)
--#define SPITZ_GPIO_BAT_COVER       (90)
--#define SPITZ_GPIO_CF_CD           (94)
--#define SPITZ_GPIO_ON_KEY          (95)
--#define SPITZ_GPIO_SWA             (97)
--#define SPITZ_GPIO_SWB             (96)
--#define SPITZ_GPIO_CHRG_FULL       (101)
--#define SPITZ_GPIO_CO              (101)
--#define SPITZ_GPIO_CF_IRQ          (105)
--#define SPITZ_GPIO_AC_IN           (115)
--#define SPITZ_GPIO_HP_IN           (116)
-+/* This list refers to all GPIO pins either in defines or in comments.
-+ *
-+ * GPIO pins not listed:
-+ * GPIO2	SYS_EN: 		System Power Enable
-+ * GPIO5-GPIO8	PWR_CAP0-PWR_CAP3:	sleep DC-DC converter power capacitors
-+ * GPIO40	not connected
-+ */
- 
--/* Spitz Only GPIOs */
- 
--#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
--#define SPITZ_GPIO_CF2_CD          (93)
-+/* Spitz/Akita System GPIO */
-+
-+#define SPITZ_GPIO_KEY_INT	   (0)	/* Key Interrupt */
-+#define SPITZ_GPIO_SYNC		  (16)	/* IOPORT Wake Up (input) */
-+#define SPITZ_GPIO_NAND_CS	  (79)	/* NAND Flash Chip Select */
-+#define SPITZ_GPIO_NC_10	  (10)	/* Not Connected (but used in kernel) */
-+/* This GPIO pin is connected:
-+ * GPIO1_RST
-+ */
- 
- 
-+/* Compact Flash Interface */
-+
-+/* Spitz/Akita Compact Flash Interface */
-+#define SPITZ_GPIO_CF_CD	  (94)	/* CF IRQ */
-+#define SPITZ_GPIO_CF_IRQ	 (105)	/* CF Ready */
-+/* These GPIO pins are connected:
-+ * GPIO48_nPOE
-+ * GPIO49_nPWE
-+ * GPIO50_nPIOR
-+ * GPIO51_nPIOW
-+ * GPIO54_nPCE_2
-+ * GPIO55_nPREG
-+ * GPIO56_nPWAIT
-+ * GPIO57_nIOIS16
-+ * GPIO80_nCS_4
-+ * GPIO85_nPCE_1
-+ * GPIO104_pSKTSEL
-+ */
-+
-+/* Spitz only Compact Flash Interface */
-+#define SPITZ_GPIO_CF2_CD	  (93)	/* CF slot1 IRQ */
-+#define SPITZ_GPIO_CF2_IRQ	 (106)	/* CF slot1 Ready */
-+/* This GPIO pin is connected:
-+ * GPIO78_nCS_2
-+ */
-+
-+
-+/* Spitz/Akita Battery, Power and Service Connector */
-+
-+#define SPITZ_GPIO_FATAL_BAT	  (21)	/* Fatal Battery */
-+#define SPITZ_GPIO_BAT_COVER	  (90)	/* Battery Cover switch */
-+#define SPITZ_GPIO_BAT_COVER2	  (15)	/* Battery Cover switch, parallel pin */
-+#define SPITZ_GPIO_CHRG_FULL	 (101)	/* Battery Full */
-+#define SPITZ_GPIO_AC_IN	 (115)	/* External Power Supply is active */
-+#define SPITZ_GPIO_ON_RESET	  (89)	/* Software Reset */
-+#define SPITZ_GPIO_SERVICE0	  (83)	/* Service Connector */
-+#define SPITZ_GPIO_SERVICE1	  (84)	/* Service Connector */
-+/* This GPIO pin is connected:
-+ * GPIO18_RDY
-+ */
-+
-+
-+/* Spitz/Akita Display Controller */
-+
-+#define SPITZ_GPIO_HSYNC	  (22)	/* Line Sync Feedback */
-+/* These GPIO pins are connected:
-+ * GPIO58_LDD_0-GPIO58_LDD_15
-+ * GPIO74_LCD_FCLK
-+ * GPIO75_LCD_LCLK
-+ * GPIO76_LCD_PCLK
-+ * GPIO77_LCD_ACBIAS
-+ */
-+
-+
-+/* Spitz/Akita SSP/SPI Bus and Devices */
-+
-+#define SPITZ_GPIO_SSP_CLK	  (19)	/* SSP bus Clock */
-+#define SPITZ_GPIO_SSP_RXD	  (86)	/* SSP bus RxD */
-+#define SPITZ_GPIO_SSP_TXD	  (87)	/* SSP bus TxD */
-+#define SPITZ_GPIO_TP_INT	  (11)	/* Touch Panel IRQ */
-+#define SPITZ_GPIO_ADS7846_CS	  (14)	/* Touch Panel Controller Chip Select */
-+#define SPITZ_GPIO_MAX1111_CS	  (20)	/* Multi Channel ADC Chip Select */
-+#define SPITZ_GPIO_LCDCON_CS	  (53)	/* LCD Controller Chip Select */
-+
-+
-+/* Spitz/Akita Supplementary USB OTG Pins */
-+
-+#define SPITZ_GPIO_USB_DEVICE	  (35)	/* USB Client power is present */
-+#define SPITZ_GPIO_USB_HOST	  (37)	/* USB OTG 5V Host power supply control */
-+#define SPITZ_GPIO_USB_CONNECT	  (41)	/* USB Host Cable is connected */
-+
-+
-+/* Spitz/Akita Audio */
-+
-+#define SPITZ_GPIO_HP_IN	 (116)	/* CPU Headphone detect */
-+#define SPITZ_GPIO_AK_INT	  (13)	/* Remote Control detect */
-+/* These GPIO AC97 pins are connected:
-+ * GPIO28_BITCLK
-+ * GPIO29_SDATA_IN
-+ * GPIO30_SDATA_OUT
-+ * GPIO31_SYNC
-+ * GPIO113_AC97_RESET_N
-+ */
-+
-+
-+/* Spitz/Akita SD Slot */
-+
-+#define SPITZ_GPIO_nSD_DETECT	  (9)	/* SD Card Presence */
-+#define SPITZ_GPIO_nSD_WP	 (81)	/* SD Write Protection */
-+/* These GPIO pins are connected:
-+ * GPIO32_MMCCLK
-+ * GPIO92_MMCDAT0
-+ * GPIO109_MMCDAT1
-+ * GPIO110_MMCDAT2
-+ * GPIO111_MMCDAT3
-+ * GPIO112_MMCCMD
-+ */
-+
-+/* Spitz/Akita I2C bus */
-+#define SPITZ_GPIO_SCL		 (117)	/* I2C SCL */
-+#define SPITZ_GPIO_SDA		 (118)	/* I2C SDA */
-+#define SPITZ_GPIO_PWR_SCL	   (3)	/* I2C SCL power */
-+#define SPITZ_GPIO_PWR_SDA	   (4)	/* I2C SDA power */
-+
-+/* audio codec pins */
-+
-+
-+/* Spitz/Akita UART ports */
-+
-+/* Fully Featured UART - connected to IOPORT connector */
-+#define SPITZ_GPIO_FFRXD	 (102)	/* IOPORT has nRXD inverted levels */
-+#define SPITZ_GPIO_FFTXD	  (99)	/* IOPORT has nTXD inverted levels */
-+#define SPITZ_GPIO_FFRTS	  (98)
-+#define SPITZ_GPIO_FFCTS	 (100)
-+#define SPITZ_GPIO_FFDTR	  (82)
-+#define SPITZ_GPIO_FFDSR	  (33)
-+
-+/* These UART GPIO pins are connected to Bluetooth
-+ * (only on Akita version with Bluetooth)
-+ * GPIO42_BTRXD
-+ * GPIO43_BTTXD
-+ * GPIO44_BTCTS
-+ * GPIO45_BTRTS
-+ */
-+
-+/* These UART GPIO pins are connected to IrDA:
-+ * GPIO46_STRXD
-+ * GPIO47_STTXD
-+ */
-+
- /* Spitz/Akita Keyboard Definitions */
- 
--#define SPITZ_KEY_STROBE_NUM         (11)
--#define SPITZ_KEY_SENSE_NUM          (7)
--#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
--#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
--#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
--#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
--#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
--#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
--#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
--#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
--
--#define SPITZ_GPIO_KEY_STROBE0       88
--#define SPITZ_GPIO_KEY_STROBE1       23
--#define SPITZ_GPIO_KEY_STROBE2       24
--#define SPITZ_GPIO_KEY_STROBE3       25
--#define SPITZ_GPIO_KEY_STROBE4       26
--#define SPITZ_GPIO_KEY_STROBE5       27
--#define SPITZ_GPIO_KEY_STROBE6       52
--#define SPITZ_GPIO_KEY_STROBE7       103
--#define SPITZ_GPIO_KEY_STROBE8       107
--#define SPITZ_GPIO_KEY_STROBE9       108
--#define SPITZ_GPIO_KEY_STROBE10      114
--
--#define SPITZ_GPIO_KEY_SENSE0        12
--#define SPITZ_GPIO_KEY_SENSE1        17
--#define SPITZ_GPIO_KEY_SENSE2        91
--#define SPITZ_GPIO_KEY_SENSE3        34
--#define SPITZ_GPIO_KEY_SENSE4        36
--#define SPITZ_GPIO_KEY_SENSE5        38
--#define SPITZ_GPIO_KEY_SENSE6        39
-+#define SPITZ_KEY_STROBE_NUM	  (11)
-+#define SPITZ_KEY_SENSE_NUM	   (7)
-+#define SPITZ_GPIO_G0_STROBE_BIT  0x0f800000
-+#define SPITZ_GPIO_G1_STROBE_BIT  0x00100000
-+#define SPITZ_GPIO_G2_STROBE_BIT  0x01000000
-+#define SPITZ_GPIO_G3_STROBE_BIT  0x00041880
-+#define SPITZ_GPIO_G0_SENSE_BIT   0x00021000
-+#define SPITZ_GPIO_G1_SENSE_BIT   0x000000d4
-+#define SPITZ_GPIO_G2_SENSE_BIT   0x08000000
-+#define SPITZ_GPIO_G3_SENSE_BIT   0x00000000
-+#define SPITZ_GPIO_KEY_STROBE0	  (88)
-+#define SPITZ_GPIO_KEY_STROBE1	  (23)
-+#define SPITZ_GPIO_KEY_STROBE2	  (24)
-+#define SPITZ_GPIO_KEY_STROBE3	  (25)
-+#define SPITZ_GPIO_KEY_STROBE4	  (26)
-+#define SPITZ_GPIO_KEY_STROBE5	  (27)
-+#define SPITZ_GPIO_KEY_STROBE6	  (52)
-+#define SPITZ_GPIO_KEY_STROBE7   (103)
-+#define SPITZ_GPIO_KEY_STROBE8   (107)
-+#define SPITZ_GPIO_KEY_STROBE9   (108)
-+#define SPITZ_GPIO_KEY_STROBE10  (114)
-+#define SPITZ_GPIO_KEY_SENSE0	  (12)
-+#define SPITZ_GPIO_KEY_SENSE1	  (17)
-+#define SPITZ_GPIO_KEY_SENSE2	  (91)
-+#define SPITZ_GPIO_KEY_SENSE3	  (34)
-+#define SPITZ_GPIO_KEY_SENSE4	  (36)
-+#define SPITZ_GPIO_KEY_SENSE5	  (38)
-+#define SPITZ_GPIO_KEY_SENSE6	  (39)
-+
-+#define SPITZ_GPIO_SWA		  (97)	/* Keyboard Interrupt A */
-+#define SPITZ_GPIO_SWB		  (96)	/* Keyboard Interrupt B */
-+#define SPITZ_GPIO_ON_KEY	  (95)	/* Power On Key */
- 
- 
--/* Spitz Scoop Device (No. 1) GPIOs */
-+/* Spitz/Akita Scoop Device (No. 1) GPIOs */
- /* Suspend States in comments */
--#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
--#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
--#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
--#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
--#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
--#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
--#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
--#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
--#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
-+#define SPITZ_SCP_LED_GREEN	SCOOP_GPCR_PA11  /* Green LED, Keep */
-+#define SPITZ_SCP_JK_B		SCOOP_GPCR_PA12  /* Fast Charge On, Keep */
-+#define SPITZ_SCP_CHRG_ON	SCOOP_GPCR_PA13  /* Charge On, Keep */
-+#define SPITZ_SCP_MUTE_L	SCOOP_GPCR_PA14  /* Extra Mute Left, Low */
-+#define SPITZ_SCP_MUTE_R	SCOOP_GPCR_PA15  /* Extra Mute Right, Low */
-+#define SPITZ_SCP_CF_POWER	SCOOP_GPCR_PA16  /* CF+SD Power Circuit, Keep */
-+#define SPITZ_SCP_LED_ORANGE	SCOOP_GPCR_PA17  /* Orange LED, Keep */
-+#define SPITZ_SCP_JK_A		SCOOP_GPCR_PA18  /* Dummy Load, Low */
-+#define SPITZ_SCP_ADC_TEMP_ON	SCOOP_GPCR_PA19  /* Battery Sensor On, Low */
- 
- #define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
--                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
--                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-+			       SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
-+			       SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
- #define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
- #define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
- #define SPITZ_SCP_SUS_SET     0
- 
- /* Spitz Scoop Device (No. 2) GPIOs */
--/* Suspend States in comments */
--#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
--#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
--#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
--#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
--#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
--#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
--#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
--#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
--#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
-+/* Suspend States in comments
-+ * Spitz only, Akita uses corresponding AKITA_IOEXP_ */
-+#define SPITZ_SCP2_IR_ON	   SCOOP_GPCR_PA11  /* IrDA On, High */
-+#define SPITZ_SCP2_AKIN_PULLUP	   SCOOP_GPCR_PA12  /* Pull-Up for Remote, Keep */
-+#define SPITZ_SCP2_RESERVED_1	   SCOOP_GPCR_PA13  /* High */
-+#define SPITZ_SCP2_RESERVED_2	   SCOOP_GPCR_PA14  /* Low */
-+#define SPITZ_SCP2_RESERVED_3	   SCOOP_GPCR_PA15  /* Low */
-+#define SPITZ_SCP2_RESERVED_4	   SCOOP_GPCR_PA16  /* Low */
-+#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Backlight Control, Low */
-+#define SPITZ_SCP2_BACKLIGHT_ON	   SCOOP_GPCR_PA18  /* Backlight On, Low */
-+#define SPITZ_SCP2_MIC_BIAS	   SCOOP_GPCR_PA19  /* Mic Bias On, Low */
- 
- #define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
--                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
--                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-+			   SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-+			   SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
- 
- #define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
- #define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
--                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-+			     SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
- #define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
- 
- 
--/* Spitz IRQ Definitions */
-+/* Spitz/Akita IRQ Definitions */
- 
--#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
--#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
--#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
--#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
--#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
--#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
--#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
--#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
--#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
-+#define SPITZ_IRQ_GPIO_KEY_INT	      IRQ_GPIO(SPITZ_GPIO_KEY_INT)
-+#define SPITZ_IRQ_GPIO_AC_IN	      IRQ_GPIO(SPITZ_GPIO_AC_IN)
-+#define SPITZ_IRQ_GPIO_AK_INT	      IRQ_GPIO(SPITZ_GPIO_AK_INT)
-+#define SPITZ_IRQ_GPIO_HP_IN	      IRQ_GPIO(SPITZ_GPIO_HP_IN)
-+#define SPITZ_IRQ_GPIO_TP_INT	      IRQ_GPIO(SPITZ_GPIO_TP_INT)
-+#define SPITZ_IRQ_GPIO_SYNC	      IRQ_GPIO(SPITZ_GPIO_SYNC)
-+#define SPITZ_IRQ_GPIO_ON_KEY	      IRQ_GPIO(SPITZ_GPIO_ON_KEY)
-+#define SPITZ_IRQ_GPIO_SWA	      IRQ_GPIO(SPITZ_GPIO_SWA)
-+#define SPITZ_IRQ_GPIO_SWB	      IRQ_GPIO(SPITZ_GPIO_SWB)
- #define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
- #define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
--#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
--#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
--#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
--#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
--#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
-+#define SPITZ_IRQ_GPIO_CF_IRQ	      IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
-+#define SPITZ_IRQ_GPIO_CF_CD	      IRQ_GPIO(SPITZ_GPIO_CF_CD)
-+#define SPITZ_IRQ_GPIO_CF2_IRQ	      IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
-+#define SPITZ_IRQ_GPIO_nSD_INT	      IRQ_GPIO(SPITZ_GPIO_nSD_INT)
- #define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
- 
- /*
-@@ -156,3 +274,5 @@
- extern struct platform_device spitzscoop2_device;
- extern struct platform_device spitzssp_device;
- extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
-+
-+#endif
-Index: linux-2.6.24/sound/arm/pxa2xx-ac97.c
-===================================================================
---- linux-2.6.24.orig/sound/arm/pxa2xx-ac97.c	2008-01-24 22:58:37.000000000 +0000
-+++ linux-2.6.24/sound/arm/pxa2xx-ac97.c	2008-02-13 13:49:22.000000000 +0000
-@@ -133,10 +133,10 @@
- #ifdef CONFIG_PXA27x
- 		/* warm reset broken on Bulverde,
- 		   so manually keep AC97 reset high */
--		pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); 
-+		pxa_gpio_mode(GPIO113_AC97_RESET_N | GPIO_OUT | GPIO_DFLT_HIGH); 
- 		udelay(10);
- 		GCR |= GCR_WARM_RST;
--		pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-+		pxa_gpio_mode(GPIO113_AC97_RESET_N_MD);
- 		udelay(500);
- #else
- 		GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN;
-@@ -335,7 +335,7 @@
- 	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
- #ifdef CONFIG_PXA27x
- 	/* Use GPIO 113 as AC97 Reset on Bulverde */
--	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-+	pxa_gpio_mode(GPIO113_AC97_RESET_N_MD);
- #endif
- 	pxa_set_cken(CKEN_AC97, 1);
- 
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/squashfs3.3.patch b/packages/kexecboot/linux-kexecboot-2.6.24/squashfs3.3.patch
deleted file mode 100644
index cb9a5c49e4..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/squashfs3.3.patch
+++ /dev/null
@@ -1,4234 +0,0 @@
-diff -x .gitignore -Nurp linux-2.6.24/fs/Kconfig linux-2.6.24-squashfs3.3/fs/Kconfig
---- linux-2.6.24/fs/Kconfig	2007-10-25 17:41:45.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/fs/Kconfig	2007-11-01 05:06:25.000000000 +0000
-@@ -1396,6 +1396,56 @@ config CRAMFS
- 
- 	  If unsure, say N.
- 
-+config SQUASHFS
-+	tristate "SquashFS 3.3 - Squashed file system support"
-+	select ZLIB_INFLATE
-+	help
-+	  Saying Y here includes support for SquashFS 3.3 (a Compressed
-+	  Read-Only File System).  Squashfs is a highly compressed read-only
-+	  filesystem for Linux.  It uses zlib compression to compress both
-+	  files, inodes and directories.  Inodes in the system are very small
-+	  and all blocks are packed to minimise data overhead. Block sizes
-+	  greater than 4K are supported up to a maximum of 1 Mbytes (default
-+	  block size 128K).  SquashFS 3.3 supports 64 bit filesystems and files
-+	  (larger than 4GB), full uid/gid information, hard links and timestamps.  
-+
-+	  Squashfs is intended for general read-only filesystem use, for
-+	  archival use (i.e. in cases where a .tar.gz file may be used), and in
-+	  embedded systems where low overhead is needed.  Further information
-+	  and filesystem tools are available from http://squashfs.sourceforge.net.
-+
-+	  If you want to compile this as a module ( = code which can be
-+	  inserted in and removed from the running kernel whenever you want),
-+	  say M here and read <file:Documentation/modules.txt>.  The module
-+	  will be called squashfs.  Note that the root file system (the one
-+	  containing the directory /) cannot be compiled as a module.
-+
-+	  If unsure, say N.
-+
-+config SQUASHFS_EMBEDDED
-+
-+	bool "Additional option for memory-constrained systems" 
-+	depends on SQUASHFS
-+	default n
-+	help
-+	  Saying Y here allows you to specify cache size.
-+
-+	  If unsure, say N.
-+
-+config SQUASHFS_FRAGMENT_CACHE_SIZE
-+	int "Number of fragments cached" if SQUASHFS_EMBEDDED
-+	depends on SQUASHFS
-+	default "3"
-+	help
-+	  By default SquashFS caches the last 3 fragments read from
-+	  the filesystem.  Increasing this amount may mean SquashFS
-+	  has to re-read fragments less often from disk, at the expense
-+	  of extra system memory.  Decreasing this amount will mean
-+	  SquashFS uses less memory at the expense of extra reads from disk.
-+
-+	  Note there must be at least one cached fragment.  Anything
-+	  much more than three will probably not make much difference.
-+
- config VXFS_FS
- 	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
- 	depends on BLOCK
-diff -x .gitignore -Nurp linux-2.6.24/fs/Makefile linux-2.6.24-squashfs3.3/fs/Makefile
---- linux-2.6.24/fs/Makefile	2007-10-25 17:41:45.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/fs/Makefile	2007-11-01 05:08:09.000000000 +0000
-@@ -72,6 +72,7 @@ obj-$(CONFIG_JBD)		+= jbd/
- obj-$(CONFIG_JBD2)		+= jbd2/
- obj-$(CONFIG_EXT2_FS)		+= ext2/
- obj-$(CONFIG_CRAMFS)		+= cramfs/
-+obj-$(CONFIG_SQUASHFS)		+= squashfs/
- obj-y				+= ramfs/
- obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
- obj-$(CONFIG_CODA_FS)		+= coda/
-diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/inode.c linux-2.6.24-squashfs3.3/fs/squashfs/inode.c
---- linux-2.6.24/fs/squashfs/inode.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/fs/squashfs/inode.c	2007-11-01 05:05:00.000000000 +0000
-@@ -0,0 +1,2192 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007
-+ * Phillip Lougher <phillip@lougher.demon.co.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * inode.c
-+ */
-+
-+#include <linux/squashfs_fs.h>
-+#include <linux/module.h>
-+#include <linux/zlib.h>
-+#include <linux/fs.h>
-+#include <linux/squashfs_fs_sb.h>
-+#include <linux/squashfs_fs_i.h>
-+#include <linux/buffer_head.h>
-+#include <linux/vfs.h>
-+#include <linux/vmalloc.h>
-+#include <linux/smp_lock.h>
-+#include <linux/exportfs.h>
-+
-+#include "squashfs.h"
-+
-+int squashfs_cached_blks;
-+
-+static void vfs_read_inode(struct inode *i);
-+static struct dentry *squashfs_get_parent(struct dentry *child);
-+static int squashfs_read_inode(struct inode *i, squashfs_inode_t inode);
-+static int squashfs_statfs(struct dentry *, struct kstatfs *);
-+static int squashfs_symlink_readpage(struct file *file, struct page *page);
-+static long long read_blocklist(struct inode *inode, int index,
-+				int readahead_blks, char *block_list,
-+				unsigned short **block_p, unsigned int *bsize);
-+static int squashfs_readpage(struct file *file, struct page *page);
-+static int squashfs_readdir(struct file *, void *, filldir_t);
-+static struct dentry *squashfs_lookup(struct inode *, struct dentry *,
-+				struct nameidata *);
-+static int squashfs_remount(struct super_block *s, int *flags, char *data);
-+static void squashfs_put_super(struct super_block *);
-+static int squashfs_get_sb(struct file_system_type *,int, const char *, void *,
-+				struct vfsmount *);
-+static struct inode *squashfs_alloc_inode(struct super_block *sb);
-+static void squashfs_destroy_inode(struct inode *inode);
-+static int init_inodecache(void);
-+static void destroy_inodecache(void);
-+
-+static struct file_system_type squashfs_fs_type = {
-+	.owner = THIS_MODULE,
-+	.name = "squashfs",
-+	.get_sb = squashfs_get_sb,
-+	.kill_sb = kill_block_super,
-+	.fs_flags = FS_REQUIRES_DEV
-+};
-+
-+static const unsigned char squashfs_filetype_table[] = {
-+	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
-+};
-+
-+static struct super_operations squashfs_super_ops = {
-+	.alloc_inode = squashfs_alloc_inode,
-+	.destroy_inode = squashfs_destroy_inode,
-+	.statfs = squashfs_statfs,
-+	.put_super = squashfs_put_super,
-+	.remount_fs = squashfs_remount
-+};
-+
-+static struct super_operations squashfs_export_super_ops = {
-+	.alloc_inode = squashfs_alloc_inode,
-+	.destroy_inode = squashfs_destroy_inode,
-+	.statfs = squashfs_statfs,
-+	.put_super = squashfs_put_super,
-+	.read_inode = vfs_read_inode
-+};
-+
-+static struct export_operations squashfs_export_ops = {
-+	.get_parent = squashfs_get_parent
-+};
-+
-+SQSH_EXTERN const struct address_space_operations squashfs_symlink_aops = {
-+	.readpage = squashfs_symlink_readpage
-+};
-+
-+SQSH_EXTERN const struct address_space_operations squashfs_aops = {
-+	.readpage = squashfs_readpage
-+};
-+
-+static const struct file_operations squashfs_dir_ops = {
-+	.read = generic_read_dir,
-+	.readdir = squashfs_readdir
-+};
-+
-+SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = {
-+	.lookup = squashfs_lookup
-+};
-+
-+
-+static struct buffer_head *get_block_length(struct super_block *s,
-+				int *cur_index, int *offset, int *c_byte)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	unsigned short temp;
-+	struct buffer_head *bh;
-+
-+	if (!(bh = sb_bread(s, *cur_index)))
-+		goto out;
-+
-+	if (msblk->devblksize - *offset == 1) {
-+		if (msblk->swap)
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+		else
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+		brelse(bh);
-+		if (!(bh = sb_bread(s, ++(*cur_index))))
-+			goto out;
-+		if (msblk->swap)
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				bh->b_data); 
-+		else
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				bh->b_data); 
-+		*c_byte = temp;
-+		*offset = 1;
-+	} else {
-+		if (msblk->swap) {
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset + 1)); 
-+		} else {
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset + 1)); 
-+		}
-+		*c_byte = temp;
-+		*offset += 2;
-+	}
-+
-+	if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) {
-+		if (*offset == msblk->devblksize) {
-+			brelse(bh);
-+			if (!(bh = sb_bread(s, ++(*cur_index))))
-+				goto out;
-+			*offset = 0;
-+		}
-+		if (*((unsigned char *) (bh->b_data + *offset)) !=
-+						SQUASHFS_MARKER_BYTE) {
-+			ERROR("Metadata block marker corrupt @ %x\n",
-+						*cur_index);
-+			brelse(bh);
-+			goto out;
-+		}
-+		(*offset)++;
-+	}
-+	return bh;
-+
-+out:
-+	return NULL;
-+}
-+
-+
-+SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer,
-+			long long index, unsigned int length,
-+			long long *next_index, int srclength)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	struct buffer_head **bh;
-+	unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1);
-+	unsigned int cur_index = index >> msblk->devblksize_log2;
-+	int bytes, avail_bytes, b = 0, k = 0;
-+	unsigned int compressed;
-+	unsigned int c_byte = length;
-+
-+	bh = kmalloc(((sblk->block_size >> msblk->devblksize_log2) + 1) *
-+								sizeof(struct buffer_head *), GFP_KERNEL);
-+	if (bh == NULL)
-+		goto read_failure;
-+
-+	if (c_byte) {
-+		bytes = msblk->devblksize - offset;
-+		compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte);
-+		c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte);
-+
-+		TRACE("Block @ 0x%llx, %scompressed size %d, src size %d\n", index,
-+					compressed ? "" : "un", (unsigned int) c_byte, srclength);
-+
-+		if (c_byte > srclength || index < 0 || (index + c_byte) > sblk->bytes_used)
-+			goto read_failure;
-+
-+		bh[0] = sb_getblk(s, cur_index);
-+		if (bh[0] == NULL)
-+			goto block_release;
-+
-+		for (b = 1; bytes < c_byte; b++) {
-+			bh[b] = sb_getblk(s, ++cur_index);
-+			if (bh[b] == NULL)
-+				goto block_release;
-+			bytes += msblk->devblksize;
-+		}
-+		ll_rw_block(READ, b, bh);
-+	} else {
-+		if (index < 0 || (index + 2) > sblk->bytes_used)
-+			goto read_failure;
-+
-+		bh[0] = get_block_length(s, &cur_index, &offset, &c_byte);
-+		if (bh[0] == NULL)
-+			goto read_failure;
-+
-+		bytes = msblk->devblksize - offset;
-+		compressed = SQUASHFS_COMPRESSED(c_byte);
-+		c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte);
-+
-+		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
-+					? "" : "un", (unsigned int) c_byte);
-+
-+		if (c_byte > srclength || (index + c_byte) > sblk->bytes_used)
-+			goto read_failure;
-+
-+		for (b = 1; bytes < c_byte; b++) {
-+			bh[b] = sb_getblk(s, ++cur_index);
-+			if (bh[b] == NULL)
-+				goto block_release;
-+			bytes += msblk->devblksize;
-+		}
-+		ll_rw_block(READ, b - 1, bh + 1);
-+	}
-+
-+	if (compressed) {
-+		int zlib_err = 0;
-+
-+		/*
-+	 	* uncompress block
-+	 	*/
-+
-+		mutex_lock(&msblk->read_data_mutex);
-+
-+		msblk->stream.next_out = buffer;
-+		msblk->stream.avail_out = srclength;
-+
-+		for (bytes = 0; k < b; k++) {
-+			avail_bytes = min(c_byte - bytes, msblk->devblksize - offset);
-+
-+			wait_on_buffer(bh[k]);
-+			if (!buffer_uptodate(bh[k]))
-+				goto release_mutex;
-+
-+			msblk->stream.next_in = bh[k]->b_data + offset;
-+			msblk->stream.avail_in = avail_bytes;
-+
-+			if (k == 0) {
-+				zlib_err = zlib_inflateInit(&msblk->stream);
-+				if (zlib_err != Z_OK) {
-+					ERROR("zlib_inflateInit returned unexpected result 0x%x,"
-+						" srclength %d\n", zlib_err, srclength);
-+					goto release_mutex;
-+				}
-+
-+				if (avail_bytes == 0) {
-+					offset = 0;
-+					brelse(bh[k]);
-+					continue;
-+				}
-+			}
-+
-+			zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH);
-+			if (zlib_err != Z_OK && zlib_err != Z_STREAM_END) {
-+				ERROR("zlib_inflate returned unexpected result 0x%x,"
-+					" srclength %d, avail_in %d, avail_out %d\n", zlib_err,
-+					srclength, msblk->stream.avail_in, msblk->stream.avail_out);
-+				goto release_mutex;
-+			}
-+
-+			bytes += avail_bytes;
-+			offset = 0;
-+			brelse(bh[k]);
-+		}
-+
-+		if (zlib_err != Z_STREAM_END)
-+			goto release_mutex;
-+
-+		zlib_err = zlib_inflateEnd(&msblk->stream);
-+		if (zlib_err != Z_OK) {
-+			ERROR("zlib_inflateEnd returned unexpected result 0x%x,"
-+				" srclength %d\n", zlib_err, srclength);
-+			goto release_mutex;
-+		}
-+		bytes = msblk->stream.total_out;
-+		mutex_unlock(&msblk->read_data_mutex);
-+	} else {
-+		int i;
-+
-+		for(i = 0; i < b; i++) {
-+			wait_on_buffer(bh[i]);
-+			if (!buffer_uptodate(bh[i]))
-+				goto block_release;
-+		}
-+
-+		for (bytes = 0; k < b; k++) {
-+			avail_bytes = min(c_byte - bytes, msblk->devblksize - offset);
-+
-+			memcpy(buffer + bytes, bh[k]->b_data + offset, avail_bytes);
-+			bytes += avail_bytes;
-+			offset = 0;
-+			brelse(bh[k]);
-+		}
-+	}
-+
-+	if (next_index)
-+		*next_index = index + c_byte + (length ? 0 :
-+				(SQUASHFS_CHECK_DATA(msblk->sblk.flags) ? 3 : 2));
-+
-+	kfree(bh);
-+	return bytes;
-+
-+release_mutex:
-+	mutex_unlock(&msblk->read_data_mutex);
-+
-+block_release:
-+	for (; k < b; k++)
-+		brelse(bh[k]);
-+
-+read_failure:
-+	ERROR("sb_bread failed reading block 0x%x\n", cur_index);
-+	kfree(bh);
-+	return 0;
-+}
-+
-+
-+SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, void *buffer,
-+				long long block, unsigned int offset,
-+				int length, long long *next_block,
-+				unsigned int *next_offset)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	int n, i, bytes, return_length = length;
-+	long long next_index;
-+
-+	TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset);
-+
-+	while (1) {
-+		for (i = 0; i < squashfs_cached_blks; i++) 
-+			if (msblk->block_cache[i].block == block)
-+				break; 
-+		
-+		mutex_lock(&msblk->block_cache_mutex);
-+
-+		if (i == squashfs_cached_blks) {
-+			/* read inode header block */
-+			if (msblk->unused_cache_blks == 0) {
-+				mutex_unlock(&msblk->block_cache_mutex);
-+				wait_event(msblk->waitq, msblk->unused_cache_blks);
-+				continue;
-+			}
-+
-+			i = msblk->next_cache;
-+			for (n = 0; n < squashfs_cached_blks; n++) {
-+				if (msblk->block_cache[i].block != SQUASHFS_USED_BLK)
-+					break;
-+				i = (i + 1) % squashfs_cached_blks;
-+			}
-+
-+			msblk->next_cache = (i + 1) % squashfs_cached_blks;
-+
-+			if (msblk->block_cache[i].block == SQUASHFS_INVALID_BLK) {
-+				msblk->block_cache[i].data = vmalloc(SQUASHFS_METADATA_SIZE);
-+				if (msblk->block_cache[i].data == NULL) {
-+					ERROR("Failed to allocate cache block\n");
-+					mutex_unlock(&msblk->block_cache_mutex);
-+					goto out;
-+				}
-+			}
-+	
-+			msblk->block_cache[i].block = SQUASHFS_USED_BLK;
-+			msblk->unused_cache_blks --;
-+			mutex_unlock(&msblk->block_cache_mutex);
-+
-+			msblk->block_cache[i].length = squashfs_read_data(s,
-+				msblk->block_cache[i].data, block, 0, &next_index,
-+				SQUASHFS_METADATA_SIZE);
-+
-+			if (msblk->block_cache[i].length == 0) {
-+				ERROR("Unable to read cache block [%llx:%x]\n", block, offset);
-+				mutex_lock(&msblk->block_cache_mutex);
-+				msblk->block_cache[i].block = SQUASHFS_INVALID_BLK;
-+				msblk->unused_cache_blks ++;
-+				smp_mb();
-+				vfree(msblk->block_cache[i].data);
-+				wake_up(&msblk->waitq);
-+				mutex_unlock(&msblk->block_cache_mutex);
-+				goto out;
-+			}
-+
-+			mutex_lock(&msblk->block_cache_mutex);
-+			msblk->block_cache[i].block = block;
-+			msblk->block_cache[i].next_index = next_index;
-+			msblk->unused_cache_blks ++;
-+			smp_mb();
-+			wake_up(&msblk->waitq);
-+			TRACE("Read cache block [%llx:%x]\n", block, offset);
-+		}
-+
-+		if (msblk->block_cache[i].block != block) {
-+			mutex_unlock(&msblk->block_cache_mutex);
-+			continue;
-+		}
-+
-+		bytes = msblk->block_cache[i].length - offset;
-+
-+		if (bytes < 1) {
-+			mutex_unlock(&msblk->block_cache_mutex);
-+			goto out;
-+		} else if (bytes >= length) {
-+			if (buffer)
-+				memcpy(buffer, msblk->block_cache[i].data + offset, length);
-+			if (msblk->block_cache[i].length - offset == length) {
-+				*next_block = msblk->block_cache[i].next_index;
-+				*next_offset = 0;
-+			} else {
-+				*next_block = block;
-+				*next_offset = offset + length;
-+			}
-+			mutex_unlock(&msblk->block_cache_mutex);
-+			goto finish;
-+		} else {
-+			if (buffer) {
-+				memcpy(buffer, msblk->block_cache[i].data + offset, bytes);
-+				buffer = (char *) buffer + bytes;
-+			}
-+			block = msblk->block_cache[i].next_index;
-+			mutex_unlock(&msblk->block_cache_mutex);
-+			length -= bytes;
-+			offset = 0;
-+		}
-+	}
-+
-+finish:
-+	return return_length;
-+out:
-+	return 0;
-+}
-+
-+
-+static int get_fragment_location(struct super_block *s, unsigned int fragment,
-+				long long *fragment_start_block,
-+				unsigned int *fragment_size)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	long long start_block =
-+		msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)];
-+	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment);
-+	struct squashfs_fragment_entry fragment_entry;
-+
-+	if (msblk->swap) {
-+		struct squashfs_fragment_entry sfragment_entry;
-+
-+		if (!squashfs_get_cached_block(s, &sfragment_entry, start_block, offset,
-+					 sizeof(sfragment_entry), &start_block, &offset))
-+			goto out;
-+		SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry);
-+	} else
-+		if (!squashfs_get_cached_block(s, &fragment_entry, start_block, offset,
-+					 sizeof(fragment_entry), &start_block, &offset))
-+			goto out;
-+
-+	*fragment_start_block = fragment_entry.start_block;
-+	*fragment_size = fragment_entry.size;
-+
-+	return 1;
-+
-+out:
-+	return 0;
-+}
-+
-+
-+SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk,
-+				struct squashfs_fragment_cache *fragment)
-+{
-+	mutex_lock(&msblk->fragment_mutex);
-+	fragment->locked --;
-+	if (fragment->locked == 0) {
-+		msblk->unused_frag_blks ++;
-+		smp_mb();
-+		wake_up(&msblk->fragment_wait_queue);
-+	}
-+	mutex_unlock(&msblk->fragment_mutex);
-+}
-+
-+
-+SQSH_EXTERN
-+struct squashfs_fragment_cache *get_cached_fragment(struct super_block *s,
-+				long long start_block, int length)
-+{
-+	int i, n;
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	while (1) {
-+		mutex_lock(&msblk->fragment_mutex);
-+
-+		for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS &&
-+				msblk->fragment[i].block != start_block; i++);
-+
-+		if (i == SQUASHFS_CACHED_FRAGMENTS) {
-+			if (msblk->unused_frag_blks == 0) {
-+				mutex_unlock(&msblk->fragment_mutex);
-+				wait_event(msblk->fragment_wait_queue, msblk->unused_frag_blks);
-+				continue;
-+			}
-+
-+			i = msblk->next_fragment;
-+			for (n = 0; n < SQUASHFS_CACHED_FRAGMENTS; n++) {
-+				if (msblk->fragment[i].locked == 0)
-+					break;
-+				i = (i + 1) % SQUASHFS_CACHED_FRAGMENTS;
-+			}
-+
-+			msblk->next_fragment = (msblk->next_fragment + 1) %
-+				SQUASHFS_CACHED_FRAGMENTS;
-+			
-+			if (msblk->fragment[i].data == NULL) {
-+				msblk->fragment[i].data = vmalloc(sblk->block_size);
-+				if (msblk->fragment[i].data == NULL) {
-+					ERROR("Failed to allocate fragment cache block\n");
-+					mutex_unlock(&msblk->fragment_mutex);
-+					goto out;
-+				}
-+			}
-+
-+			msblk->unused_frag_blks --;
-+			msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
-+			msblk->fragment[i].locked = 1;
-+			mutex_unlock(&msblk->fragment_mutex);
-+
-+			msblk->fragment[i].length = squashfs_read_data(s,
-+				msblk->fragment[i].data, start_block, length, NULL,
-+				sblk->block_size);
-+
-+			if (msblk->fragment[i].length == 0) {
-+				ERROR("Unable to read fragment cache block [%llx]\n", start_block);
-+				msblk->fragment[i].locked = 0;
-+				msblk->unused_frag_blks ++;
-+				smp_mb();
-+				wake_up(&msblk->fragment_wait_queue);
-+				goto out;
-+			}
-+
-+			mutex_lock(&msblk->fragment_mutex);
-+			msblk->fragment[i].block = start_block;
-+			TRACE("New fragment %d, start block %lld, locked %d\n",
-+				i, msblk->fragment[i].block, msblk->fragment[i].locked);
-+			mutex_unlock(&msblk->fragment_mutex);
-+			break;
-+		}
-+
-+		if (msblk->fragment[i].locked == 0)
-+			msblk->unused_frag_blks --;
-+		msblk->fragment[i].locked++;
-+		mutex_unlock(&msblk->fragment_mutex);
-+		TRACE("Got fragment %d, start block %lld, locked %d\n", i,
-+			msblk->fragment[i].block, msblk->fragment[i].locked);
-+		break;
-+	}
-+
-+	return &msblk->fragment[i];
-+
-+out:
-+	return NULL;
-+}
-+
-+
-+static void squashfs_new_inode(struct squashfs_sb_info *msblk, struct inode *i,
-+				struct squashfs_base_inode_header *inodeb)
-+{
-+	i->i_ino = inodeb->inode_number;
-+	i->i_mtime.tv_sec = inodeb->mtime;
-+	i->i_atime.tv_sec = inodeb->mtime;
-+	i->i_ctime.tv_sec = inodeb->mtime;
-+	i->i_uid = msblk->uid[inodeb->uid];
-+	i->i_mode = inodeb->mode;
-+	i->i_size = 0;
-+
-+	if (inodeb->guid == SQUASHFS_GUIDS)
-+		i->i_gid = i->i_uid;
-+	else
-+		i->i_gid = msblk->guid[inodeb->guid];
-+}
-+
-+
-+static squashfs_inode_t squashfs_inode_lookup(struct super_block *s, int ino)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	long long start = msblk->inode_lookup_table[SQUASHFS_LOOKUP_BLOCK(ino - 1)];
-+	int offset = SQUASHFS_LOOKUP_BLOCK_OFFSET(ino - 1);
-+	squashfs_inode_t inode;
-+
-+	TRACE("Entered squashfs_inode_lookup, inode_number = %d\n", ino);
-+
-+	if (msblk->swap) {
-+		squashfs_inode_t sinode;
-+
-+		if (!squashfs_get_cached_block(s, &sinode, start, offset,
-+					sizeof(sinode), &start, &offset))
-+			goto out;
-+		SQUASHFS_SWAP_INODE_T((&inode), &sinode);
-+	} else if (!squashfs_get_cached_block(s, &inode, start, offset,
-+					sizeof(inode), &start, &offset))
-+			goto out;
-+
-+	TRACE("squashfs_inode_lookup, inode = 0x%llx\n", inode);
-+
-+	return inode;
-+
-+out:
-+	return SQUASHFS_INVALID_BLK;
-+}
-+	
-+
-+static void vfs_read_inode(struct inode *i)
-+{
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	squashfs_inode_t inode = squashfs_inode_lookup(i->i_sb, i->i_ino);
-+
-+	TRACE("Entered vfs_read_inode\n");
-+
-+	if(inode != SQUASHFS_INVALID_BLK)
-+		(msblk->read_inode)(i, inode);
-+}
-+
-+
-+static struct dentry *squashfs_get_parent(struct dentry *child)
-+{
-+	struct inode *i = child->d_inode;
-+	struct inode *parent = iget(i->i_sb, SQUASHFS_I(i)->u.s2.parent_inode);
-+	struct dentry *rv;
-+
-+	TRACE("Entered squashfs_get_parent\n");
-+
-+	if(parent == NULL) {
-+		rv = ERR_PTR(-EACCES);
-+		goto out;
-+	}
-+
-+	rv = d_alloc_anon(parent);
-+	if(rv == NULL)
-+		rv = ERR_PTR(-ENOMEM);
-+
-+out:
-+	return rv;
-+}
-+
-+	
-+SQSH_EXTERN struct inode *squashfs_iget(struct super_block *s,
-+				squashfs_inode_t inode, unsigned int inode_number)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct inode *i = iget_locked(s, inode_number);
-+
-+	TRACE("Entered squashfs_iget\n");
-+
-+	if(i && (i->i_state & I_NEW)) {
-+		(msblk->read_inode)(i, inode);
-+		unlock_new_inode(i);
-+	}
-+
-+	return i;
-+}
-+
-+
-+static int squashfs_read_inode(struct inode *i, squashfs_inode_t inode)
-+{
-+	struct super_block *s = i->i_sb;
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long block = SQUASHFS_INODE_BLK(inode) + sblk->inode_table_start;
-+	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
-+	long long next_block;
-+	unsigned int next_offset;
-+	union squashfs_inode_header id, sid;
-+	struct squashfs_base_inode_header *inodeb = &id.base, *sinodeb = &sid.base;
-+
-+	TRACE("Entered squashfs_read_inode\n");
-+
-+	if (msblk->swap) {
-+		if (!squashfs_get_cached_block(s, sinodeb, block, offset,
-+					sizeof(*sinodeb), &next_block, &next_offset))
-+			goto failed_read;
-+		SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb, sizeof(*sinodeb));
-+	} else
-+		if (!squashfs_get_cached_block(s, inodeb, block, offset,
-+					sizeof(*inodeb), &next_block, &next_offset))
-+			goto failed_read;
-+
-+	squashfs_new_inode(msblk, i, inodeb);
-+
-+	switch(inodeb->inode_type) {
-+		case SQUASHFS_FILE_TYPE: {
-+			unsigned int frag_size;
-+			long long frag_blk;
-+			struct squashfs_reg_inode_header *inodep = &id.reg;
-+			struct squashfs_reg_inode_header *sinodep = &sid.reg;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, sinodep, block, offset,
-+						sizeof(*sinodep), &next_block, &next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, inodep, block, offset,
-+						sizeof(*inodep), &next_block, &next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG)
-+					if(!get_fragment_location(s, inodep->fragment, &frag_blk,
-+												&frag_size))
-+						goto failed_read;
-+				
-+			i->i_nlink = 1;
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			i->i_data.a_ops = &squashfs_aops;
-+
-+			TRACE("File inode %x:%x, start_block %llx, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_LREG_TYPE: {
-+			unsigned int frag_size;
-+			long long frag_blk;
-+			struct squashfs_lreg_inode_header *inodep = &id.lreg;
-+			struct squashfs_lreg_inode_header *sinodep = &sid.lreg;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, sinodep, block, offset,
-+						sizeof(*sinodep), &next_block, &next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, inodep, block, offset,
-+						sizeof(*inodep), &next_block, &next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG)
-+				if (!get_fragment_location(s, inodep->fragment, &frag_blk,
-+												 &frag_size))
-+					goto failed_read;
-+				
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			i->i_data.a_ops = &squashfs_aops;
-+
-+			TRACE("File inode %x:%x, start_block %llx, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_DIR_TYPE: {
-+			struct squashfs_dir_inode_header *inodep = &id.dir;
-+			struct squashfs_dir_inode_header *sinodep = &sid.dir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, sinodep, block, offset,
-+						sizeof(*sinodep), &next_block, &next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, inodep, block, offset,
-+						sizeof(*inodep), &next_block, &next_offset))
-+					goto failed_read;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops;
-+			i->i_fop = &squashfs_dir_ops;
-+			i->i_mode |= S_IFDIR;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
-+			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
-+
-+			TRACE("Directory inode %x:%x, start_block %x, offset "
-+					"%x\n", SQUASHFS_INODE_BLK(inode),
-+					offset, inodep->start_block,
-+					inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_LDIR_TYPE: {
-+			struct squashfs_ldir_inode_header *inodep = &id.ldir;
-+			struct squashfs_ldir_inode_header *sinodep = &sid.ldir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, sinodep, block, offset,
-+						sizeof(*sinodep), &next_block, &next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, inodep, block, offset,
-+						sizeof(*inodep), &next_block, &next_offset))
-+					goto failed_read;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops;
-+			i->i_fop = &squashfs_dir_ops;
-+			i->i_mode |= S_IFDIR;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
-+			SQUASHFS_I(i)->u.s2.directory_index_offset = next_offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count = inodep->i_count;
-+			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
-+
-+			TRACE("Long directory inode %x:%x, start_block %x, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_SYMLINK_TYPE: {
-+			struct squashfs_symlink_inode_header *inodep = &id.symlink;
-+			struct squashfs_symlink_inode_header *sinodep = &sid.symlink;
-+	
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, sinodep, block, offset,
-+						sizeof(*sinodep), &next_block, &next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, inodep, block, offset,
-+						sizeof(*inodep), &next_block, &next_offset))
-+					goto failed_read;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->symlink_size;
-+			i->i_op = &page_symlink_inode_operations;
-+			i->i_data.a_ops = &squashfs_symlink_aops;
-+			i->i_mode |= S_IFLNK;
-+			SQUASHFS_I(i)->start_block = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+
-+			TRACE("Symbolic link inode %x:%x, start_block %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					next_block, next_offset);
-+			break;
-+		 }
-+		 case SQUASHFS_BLKDEV_TYPE:
-+		 case SQUASHFS_CHRDEV_TYPE: {
-+			struct squashfs_dev_inode_header *inodep = &id.dev;
-+			struct squashfs_dev_inode_header *sinodep = &sid.dev;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, sinodep, block, offset,
-+						sizeof(*sinodep), &next_block, &next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, inodep, block, offset,
-+						sizeof(*inodep), &next_block, &next_offset))
-+					goto failed_read;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_mode |= (inodeb->inode_type == SQUASHFS_CHRDEV_TYPE) ?
-+					S_IFCHR : S_IFBLK;
-+			init_special_inode(i, i->i_mode, old_decode_dev(inodep->rdev));
-+
-+			TRACE("Device inode %x:%x, rdev %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset, inodep->rdev);
-+			break;
-+		 }
-+		 case SQUASHFS_FIFO_TYPE:
-+		 case SQUASHFS_SOCKET_TYPE: {
-+			struct squashfs_ipc_inode_header *inodep = &id.ipc;
-+			struct squashfs_ipc_inode_header *sinodep = &sid.ipc;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, sinodep, block, offset,
-+						sizeof(*sinodep), &next_block, &next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, inodep, block, offset,
-+						sizeof(*inodep), &next_block, &next_offset))
-+					goto failed_read;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
-+							? S_IFIFO : S_IFSOCK;
-+			init_special_inode(i, i->i_mode, 0);
-+			break;
-+		 }
-+		 default:
-+			ERROR("Unknown inode type %d in squashfs_iget!\n",
-+					inodeb->inode_type);
-+			goto failed_read1;
-+	}
-+	
-+	return 1;
-+
-+failed_read:
-+	ERROR("Unable to read inode [%llx:%x]\n", block, offset);
-+
-+failed_read1:
-+	make_bad_inode(i);
-+	return 0;
-+}
-+
-+
-+static int read_inode_lookup_table(struct super_block *s)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned int length = SQUASHFS_LOOKUP_BLOCK_BYTES(sblk->inodes);
-+
-+	TRACE("In read_inode_lookup_table, length %d\n", length);
-+
-+	/* Allocate inode lookup table */
-+	msblk->inode_lookup_table = kmalloc(length, GFP_KERNEL);
-+	if (msblk->inode_lookup_table == NULL) {
-+		ERROR("Failed to allocate inode lookup table\n");
-+		return 0;
-+	}
-+   
-+	if (!squashfs_read_data(s, (char *) msblk->inode_lookup_table,
-+			sblk->lookup_table_start, length |
-+			SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length)) {
-+		ERROR("unable to read inode lookup table\n");
-+		return 0;
-+	}
-+
-+	if (msblk->swap) {
-+		int i;
-+		long long block;
-+
-+		for (i = 0; i < SQUASHFS_LOOKUP_BLOCKS(sblk->inodes); i++) {
-+			/* XXX */
-+			SQUASHFS_SWAP_LOOKUP_BLOCKS((&block),
-+						&msblk->inode_lookup_table[i], 1);
-+			msblk->inode_lookup_table[i] = block;
-+		}
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int read_fragment_index_table(struct super_block *s)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned int length = SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments);
-+
-+	if(length == 0)
-+		return 1;
-+
-+	/* Allocate fragment index table */
-+	msblk->fragment_index = kmalloc(length, GFP_KERNEL);
-+	if (msblk->fragment_index == NULL) {
-+		ERROR("Failed to allocate fragment index table\n");
-+		return 0;
-+	}
-+   
-+	if (!squashfs_read_data(s, (char *) msblk->fragment_index,
-+			sblk->fragment_table_start, length |
-+			SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length)) {
-+		ERROR("unable to read fragment index table\n");
-+		return 0;
-+	}
-+
-+	if (msblk->swap) {
-+		int i;
-+		long long fragment;
-+
-+		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments); i++) {
-+			/* XXX */
-+			SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment),
-+						&msblk->fragment_index[i], 1);
-+			msblk->fragment_index[i] = fragment;
-+		}
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int readahead_metadata(struct super_block *s)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	int i;
-+
-+	squashfs_cached_blks = SQUASHFS_CACHED_BLKS;
-+
-+	/* Init inode_table block pointer array */
-+	msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) *
-+					squashfs_cached_blks, GFP_KERNEL);
-+	if (msblk->block_cache == NULL) {
-+		ERROR("Failed to allocate block cache\n");
-+		goto failed;
-+	}
-+
-+	for (i = 0; i < squashfs_cached_blks; i++)
-+		msblk->block_cache[i].block = SQUASHFS_INVALID_BLK;
-+
-+	msblk->next_cache = 0;
-+	msblk->unused_cache_blks = squashfs_cached_blks;
-+
-+	return 1;
-+
-+failed:
-+	return 0;
-+}
-+
-+
-+static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent)
-+{
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	msblk->read_inode = squashfs_read_inode;
-+	msblk->read_blocklist = read_blocklist;
-+	msblk->read_fragment_index_table = read_fragment_index_table;
-+
-+	if (sblk->s_major == 1) {
-+		if (!squashfs_1_0_supported(msblk)) {
-+			SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems "
-+				"are unsupported\n");
-+			SERROR("Please recompile with Squashfs 1.0 support enabled\n");
-+			return 0;
-+		}
-+	} else if (sblk->s_major == 2) {
-+		if (!squashfs_2_0_supported(msblk)) {
-+			SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems "
-+				"are unsupported\n");
-+			SERROR("Please recompile with Squashfs 2.0 support enabled\n");
-+			return 0;
-+		}
-+	} else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor >
-+			SQUASHFS_MINOR) {
-+		SERROR("Major/Minor mismatch, trying to mount newer %d.%d "
-+				"filesystem\n", sblk->s_major, sblk->s_minor);
-+		SERROR("Please update your kernel\n");
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int squashfs_fill_super(struct super_block *s, void *data, int silent)
-+{
-+	struct squashfs_sb_info *msblk;
-+	struct squashfs_super_block *sblk;
-+	int i;
-+	char b[BDEVNAME_SIZE];
-+	struct inode *root;
-+
-+	TRACE("Entered squashfs_fill_superblock\n");
-+
-+	s->s_fs_info = kzalloc(sizeof(struct squashfs_sb_info), GFP_KERNEL);
-+	if (s->s_fs_info == NULL) {
-+		ERROR("Failed to allocate superblock\n");
-+		goto failure;
-+	}
-+	msblk = s->s_fs_info;
-+
-+	msblk->stream.workspace = vmalloc(zlib_inflate_workspacesize());
-+	if (msblk->stream.workspace == NULL) {
-+		ERROR("Failed to allocate zlib workspace\n");
-+		goto failure;
-+	}
-+	sblk = &msblk->sblk;
-+	
-+	msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE);
-+	msblk->devblksize_log2 = ffz(~msblk->devblksize);
-+
-+	mutex_init(&msblk->read_data_mutex);
-+	mutex_init(&msblk->read_page_mutex);
-+	mutex_init(&msblk->block_cache_mutex);
-+	mutex_init(&msblk->fragment_mutex);
-+	mutex_init(&msblk->meta_index_mutex);
-+	
-+	init_waitqueue_head(&msblk->waitq);
-+	init_waitqueue_head(&msblk->fragment_wait_queue);
-+
-+	/* sblk->bytes_used is checked in squashfs_read_data to ensure reads are not
-+ 	 * beyond filesystem end.  As we're using squashfs_read_data to read sblk here,
-+ 	 * first set sblk->bytes_used to a useful value */
-+	sblk->bytes_used = sizeof(struct squashfs_super_block);
-+	if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START,
-+					sizeof(struct squashfs_super_block) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, sizeof(struct squashfs_super_block))) {
-+		SERROR("unable to read superblock\n");
-+		goto failed_mount;
-+	}
-+
-+	/* Check it is a SQUASHFS superblock */
-+	if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) {
-+		if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) {
-+			struct squashfs_super_block ssblk;
-+
-+			WARNING("Mounting a different endian SQUASHFS filesystem on %s\n",
-+				bdevname(s->s_bdev, b));
-+
-+			SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk);
-+			memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block));
-+			msblk->swap = 1;
-+		} else  {
-+			SERROR("Can't find a SQUASHFS superblock on %s\n",
-+							bdevname(s->s_bdev, b));
-+			goto failed_mount;
-+		}
-+	}
-+
-+	/* Check the MAJOR & MINOR versions */
-+	if(!supported_squashfs_filesystem(msblk, silent))
-+		goto failed_mount;
-+
-+	/* Check the filesystem does not extend beyond the end of the
-+	   block device */
-+	if(sblk->bytes_used < 0 || sblk->bytes_used > i_size_read(s->s_bdev->bd_inode))
-+		goto failed_mount;
-+
-+	/* Check the root inode for sanity */
-+	if (SQUASHFS_INODE_OFFSET(sblk->root_inode) > SQUASHFS_METADATA_SIZE)
-+		goto failed_mount;
-+
-+	TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b));
-+	TRACE("Inodes are %scompressed\n", SQUASHFS_UNCOMPRESSED_INODES(sblk->flags)
-+					? "un" : "");
-+	TRACE("Data is %scompressed\n", SQUASHFS_UNCOMPRESSED_DATA(sblk->flags)
-+					? "un" : "");
-+	TRACE("Check data is %spresent in the filesystem\n",
-+					SQUASHFS_CHECK_DATA(sblk->flags) ?  "" : "not ");
-+	TRACE("Filesystem size %lld bytes\n", sblk->bytes_used);
-+	TRACE("Block size %d\n", sblk->block_size);
-+	TRACE("Number of inodes %d\n", sblk->inodes);
-+	if (sblk->s_major > 1)
-+		TRACE("Number of fragments %d\n", sblk->fragments);
-+	TRACE("Number of uids %d\n", sblk->no_uids);
-+	TRACE("Number of gids %d\n", sblk->no_guids);
-+	TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start);
-+	TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start);
-+	if (sblk->s_major > 1)
-+		TRACE("sblk->fragment_table_start %llx\n", sblk->fragment_table_start);
-+	TRACE("sblk->uid_start %llx\n", sblk->uid_start);
-+
-+	s->s_maxbytes = MAX_LFS_FILESIZE;
-+	s->s_flags |= MS_RDONLY;
-+	s->s_op = &squashfs_super_ops;
-+
-+	if (readahead_metadata(s) == 0)
-+		goto failed_mount;
-+
-+	/* Allocate read_page block */
-+	msblk->read_page = vmalloc(sblk->block_size);
-+	if (msblk->read_page == NULL) {
-+		ERROR("Failed to allocate read_page block\n");
-+		goto failed_mount;
-+	}
-+
-+	/* Allocate uid and gid tables */
-+	msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) *
-+					sizeof(unsigned int), GFP_KERNEL);
-+	if (msblk->uid == NULL) {
-+		ERROR("Failed to allocate uid/gid table\n");
-+		goto failed_mount;
-+	}
-+	msblk->guid = msblk->uid + sblk->no_uids;
-+   
-+	if (msblk->swap) {
-+		unsigned int suid[sblk->no_uids + sblk->no_guids];
-+
-+		if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start,
-+					((sblk->no_uids + sblk->no_guids) *
-+					 sizeof(unsigned int)) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, (sblk->no_uids + sblk->no_guids) * sizeof(unsigned int))) {
-+			ERROR("unable to read uid/gid table\n");
-+			goto failed_mount;
-+		}
-+
-+		SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids +
-+			sblk->no_guids), (sizeof(unsigned int) * 8));
-+	} else
-+		if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start,
-+					((sblk->no_uids + sblk->no_guids) *
-+					 sizeof(unsigned int)) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, (sblk->no_uids + sblk->no_guids) * sizeof(unsigned int))) {
-+			ERROR("unable to read uid/gid table\n");
-+			goto failed_mount;
-+		}
-+
-+
-+	if (sblk->s_major == 1 && squashfs_1_0_supported(msblk))
-+		goto allocate_root;
-+
-+	msblk->fragment = kzalloc(sizeof(struct squashfs_fragment_cache) *
-+				SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL);
-+	if (msblk->fragment == NULL) {
-+		ERROR("Failed to allocate fragment block cache\n");
-+		goto failed_mount;
-+	}
-+
-+	for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) {
-+		msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
-+	}
-+
-+	msblk->next_fragment = 0;
-+	msblk->unused_frag_blks = SQUASHFS_CACHED_FRAGMENTS;
-+
-+	/* Allocate and read fragment index table */
-+	if (msblk->read_fragment_index_table(s) == 0)
-+		goto failed_mount;
-+
-+	if(sblk->s_major < 3 || sblk->lookup_table_start == SQUASHFS_INVALID_BLK)
-+		goto allocate_root;
-+
-+	/* Allocate and read inode lookup table */
-+	if (read_inode_lookup_table(s) == 0)
-+		goto failed_mount;
-+
-+	s->s_op = &squashfs_export_super_ops;
-+	s->s_export_op = &squashfs_export_ops;
-+
-+allocate_root:
-+	root = new_inode(s);
-+	if ((msblk->read_inode)(root, sblk->root_inode) == 0)
-+		goto failed_mount;
-+	insert_inode_hash(root);
-+
-+	s->s_root = d_alloc_root(root);
-+	if (s->s_root == NULL) {
-+		ERROR("Root inode create failed\n");
-+		iput(root);
-+		goto failed_mount;
-+	}
-+
-+	TRACE("Leaving squashfs_fill_super\n");
-+	return 0;
-+
-+failed_mount:
-+	kfree(msblk->inode_lookup_table);
-+	kfree(msblk->fragment_index);
-+	kfree(msblk->fragment);
-+	kfree(msblk->uid);
-+	vfree(msblk->read_page);
-+	kfree(msblk->block_cache);
-+	kfree(msblk->fragment_index_2);
-+	vfree(msblk->stream.workspace);
-+	kfree(s->s_fs_info);
-+	s->s_fs_info = NULL;
-+	return -EINVAL;
-+
-+failure:
-+	return -ENOMEM;
-+}
-+
-+
-+static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf)
-+{
-+	struct squashfs_sb_info *msblk = dentry->d_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	TRACE("Entered squashfs_statfs\n");
-+
-+	buf->f_type = SQUASHFS_MAGIC;
-+	buf->f_bsize = sblk->block_size;
-+	buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1;
-+	buf->f_bfree = buf->f_bavail = 0;
-+	buf->f_files = sblk->inodes;
-+	buf->f_ffree = 0;
-+	buf->f_namelen = SQUASHFS_NAME_LEN;
-+
-+	return 0;
-+}
-+
-+
-+static int squashfs_symlink_readpage(struct file *file, struct page *page)
-+{
-+	struct inode *inode = page->mapping->host;
-+	int index = page->index << PAGE_CACHE_SHIFT, length, bytes, avail_bytes;
-+	long long block = SQUASHFS_I(inode)->start_block;
-+	int offset = SQUASHFS_I(inode)->offset;
-+	void *pageaddr = kmap(page);
-+
-+	TRACE("Entered squashfs_symlink_readpage, page index %ld, start block "
-+				"%llx, offset %x\n", page->index,
-+				SQUASHFS_I(inode)->start_block,
-+				SQUASHFS_I(inode)->offset);
-+
-+	for (length = 0; length < index; length += bytes) {
-+		bytes = squashfs_get_cached_block(inode->i_sb, NULL, block,
-+				offset, PAGE_CACHE_SIZE, &block, &offset);
-+		if (bytes == 0) {
-+			ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset);
-+			goto skip_read;
-+		}
-+	}
-+
-+	if (length != index) {
-+		ERROR("(squashfs_symlink_readpage) length != index\n");
-+		bytes = 0;
-+		goto skip_read;
-+	}
-+
-+	avail_bytes = min_t(int, i_size_read(inode) - length, PAGE_CACHE_SIZE);
-+
-+	bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block, offset,
-+		avail_bytes, &block, &offset);
-+	if (bytes == 0)
-+		ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset);
-+
-+skip_read:
-+	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+	kunmap(page);
-+	flush_dcache_page(page);
-+	SetPageUptodate(page);
-+	unlock_page(page);
-+
-+	return 0;
-+}
-+
-+
-+struct meta_index *locate_meta_index(struct inode *inode, int index, int offset)
-+{
-+	struct meta_index *meta = NULL;
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	int i;
-+
-+	mutex_lock(&msblk->meta_index_mutex);
-+
-+	TRACE("locate_meta_index: index %d, offset %d\n", index, offset);
-+
-+	if (msblk->meta_index == NULL)
-+		goto not_allocated;
-+
-+	for (i = 0; i < SQUASHFS_META_NUMBER; i ++) {
-+		if (msblk->meta_index[i].inode_number == inode->i_ino &&
-+				msblk->meta_index[i].offset >= offset &&
-+				msblk->meta_index[i].offset <= index &&
-+				msblk->meta_index[i].locked == 0) {
-+			TRACE("locate_meta_index: entry %d, offset %d\n", i,
-+					msblk->meta_index[i].offset);
-+			meta = &msblk->meta_index[i];
-+			offset = meta->offset;
-+		}
-+	}
-+
-+	if (meta)
-+		meta->locked = 1;
-+
-+not_allocated:
-+	mutex_unlock(&msblk->meta_index_mutex);
-+
-+	return meta;
-+}
-+
-+
-+struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip)
-+{
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	struct meta_index *meta = NULL;
-+	int i;
-+
-+	mutex_lock(&msblk->meta_index_mutex);
-+
-+	TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip);
-+
-+	if (msblk->meta_index == NULL) {
-+		msblk->meta_index = kmalloc(sizeof(struct meta_index) *
-+					SQUASHFS_META_NUMBER, GFP_KERNEL);
-+		if (msblk->meta_index == NULL) {
-+			ERROR("Failed to allocate meta_index\n");
-+			goto failed;
-+		}
-+		for (i = 0; i < SQUASHFS_META_NUMBER; i++) {
-+			msblk->meta_index[i].inode_number = 0;
-+			msblk->meta_index[i].locked = 0;
-+		}
-+		msblk->next_meta_index = 0;
-+	}
-+
-+	for (i = SQUASHFS_META_NUMBER; i &&
-+			msblk->meta_index[msblk->next_meta_index].locked; i --)
-+		msblk->next_meta_index = (msblk->next_meta_index + 1) %
-+			SQUASHFS_META_NUMBER;
-+
-+	if (i == 0) {
-+		TRACE("empty_meta_index: failed!\n");
-+		goto failed;
-+	}
-+
-+	TRACE("empty_meta_index: returned meta entry %d, %p\n",
-+			msblk->next_meta_index,
-+			&msblk->meta_index[msblk->next_meta_index]);
-+
-+	meta = &msblk->meta_index[msblk->next_meta_index];
-+	msblk->next_meta_index = (msblk->next_meta_index + 1) %
-+			SQUASHFS_META_NUMBER;
-+
-+	meta->inode_number = inode->i_ino;
-+	meta->offset = offset;
-+	meta->skip = skip;
-+	meta->entries = 0;
-+	meta->locked = 1;
-+
-+failed:
-+	mutex_unlock(&msblk->meta_index_mutex);
-+	return meta;
-+}
-+
-+
-+void release_meta_index(struct inode *inode, struct meta_index *meta)
-+{
-+	meta->locked = 0;
-+	smp_mb();
-+}
-+
-+
-+static int read_block_index(struct super_block *s, int blocks, char *block_list,
-+				long long *start_block, int *offset)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	unsigned int *block_listp;
-+	int block = 0;
-+	
-+	if (msblk->swap) {
-+		char sblock_list[blocks << 2];
-+
-+		if (!squashfs_get_cached_block(s, sblock_list, *start_block,
-+				*offset, blocks << 2, start_block, offset)) {
-+			ERROR("Fail reading block list [%llx:%x]\n", *start_block, *offset);
-+			goto failure;
-+		}
-+		SQUASHFS_SWAP_INTS(((unsigned int *)block_list),
-+				((unsigned int *)sblock_list), blocks);
-+	} else {
-+		if (!squashfs_get_cached_block(s, block_list, *start_block,
-+				*offset, blocks << 2, start_block, offset)) {
-+			ERROR("Fail reading block list [%llx:%x]\n", *start_block, *offset);
-+			goto failure;
-+		}
-+	}
-+
-+	for (block_listp = (unsigned int *) block_list; blocks;
-+				block_listp++, blocks --)
-+		block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp);
-+
-+	return block;
-+
-+failure:
-+	return -1;
-+}
-+
-+
-+#define SIZE 256
-+
-+static inline int calculate_skip(int blocks) {
-+	int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES);
-+	return skip >= 7 ? 7 : skip + 1;
-+}
-+
-+
-+static int get_meta_index(struct inode *inode, int index,
-+		long long *index_block, int *index_offset,
-+		long long *data_block, char *block_list)
-+{
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int skip = calculate_skip(i_size_read(inode) >> sblk->block_log);
-+	int offset = 0;
-+	struct meta_index *meta;
-+	struct meta_entry *meta_entry;
-+	long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start;
-+	int cur_offset = SQUASHFS_I(inode)->offset;
-+	long long cur_data_block = SQUASHFS_I(inode)->start_block;
-+	int i;
-+ 
-+	index /= SQUASHFS_META_INDEXES * skip;
-+
-+	while (offset < index) {
-+		meta = locate_meta_index(inode, index, offset + 1);
-+
-+		if (meta == NULL) {
-+			meta = empty_meta_index(inode, offset + 1, skip);
-+			if (meta == NULL)
-+				goto all_done;
-+		} else {
-+			if(meta->entries == 0)
-+				goto failed;
-+			/* XXX */
-+			offset = index < meta->offset + meta->entries ? index :
-+				meta->offset + meta->entries - 1;
-+			/* XXX */
-+			meta_entry = &meta->meta_entry[offset - meta->offset];
-+			cur_index_block = meta_entry->index_block + sblk->inode_table_start;
-+			cur_offset = meta_entry->offset;
-+			cur_data_block = meta_entry->data_block;
-+			TRACE("get_meta_index: offset %d, meta->offset %d, "
-+				"meta->entries %d\n", offset, meta->offset, meta->entries);
-+			TRACE("get_meta_index: index_block 0x%llx, offset 0x%x"
-+				" data_block 0x%llx\n", cur_index_block,
-+				cur_offset, cur_data_block);
-+		}
-+
-+		for (i = meta->offset + meta->entries; i <= index &&
-+				i < meta->offset + SQUASHFS_META_ENTRIES; i++) {
-+			int blocks = skip * SQUASHFS_META_INDEXES;
-+
-+			while (blocks) {
-+				int block = blocks > (SIZE >> 2) ? (SIZE >> 2) : blocks;
-+				int res = read_block_index(inode->i_sb, block, block_list,
-+					&cur_index_block, &cur_offset);
-+
-+				if (res == -1)
-+					goto failed;
-+
-+				cur_data_block += res;
-+				blocks -= block;
-+			}
-+
-+			meta_entry = &meta->meta_entry[i - meta->offset];
-+			meta_entry->index_block = cur_index_block - sblk->inode_table_start;
-+			meta_entry->offset = cur_offset;
-+			meta_entry->data_block = cur_data_block;
-+			meta->entries ++;
-+			offset ++;
-+		}
-+
-+		TRACE("get_meta_index: meta->offset %d, meta->entries %d\n",
-+				meta->offset, meta->entries);
-+
-+		release_meta_index(inode, meta);
-+	}
-+
-+all_done:
-+	*index_block = cur_index_block;
-+	*index_offset = cur_offset;
-+	*data_block = cur_data_block;
-+
-+	return offset * SQUASHFS_META_INDEXES * skip;
-+
-+failed:
-+	release_meta_index(inode, meta);
-+	return -1;
-+}
-+
-+
-+static long long read_blocklist(struct inode *inode, int index,
-+				int readahead_blks, char *block_list,
-+				unsigned short **block_p, unsigned int *bsize)
-+{
-+	long long block_ptr;
-+	int offset;
-+	long long block;
-+	int res = get_meta_index(inode, index, &block_ptr, &offset, &block,
-+		block_list);
-+
-+	TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset"
-+		       " 0x%x, block 0x%llx\n", res, index, block_ptr, offset, block);
-+
-+	if(res == -1)
-+		goto failure;
-+
-+	index -= res;
-+
-+	while (index) {
-+		int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index;
-+		int res = read_block_index(inode->i_sb, blocks, block_list,
-+			&block_ptr, &offset);
-+		if (res == -1)
-+			goto failure;
-+		block += res;
-+		index -= blocks;
-+	}
-+
-+	if (read_block_index(inode->i_sb, 1, block_list, &block_ptr, &offset) == -1)
-+		goto failure;
-+	*bsize = *((unsigned int *) block_list);
-+
-+	return block;
-+
-+failure:
-+	return 0;
-+}
-+
-+
-+static int squashfs_readpage(struct file *file, struct page *page)
-+{
-+	struct inode *inode = page->mapping->host;
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned char *block_list = NULL;
-+	long long block;
-+	unsigned int bsize, i;
-+	int bytes;
-+	int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT);
-+ 	void *pageaddr;
-+	struct squashfs_fragment_cache *fragment = NULL;
-+	char *data_ptr = msblk->read_page;
-+	
-+	int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1;
-+	int start_index = page->index & ~mask;
-+	int end_index = start_index | mask;
-+	int file_end = i_size_read(inode) >> sblk->block_log;
-+	int sparse = 0;
-+
-+	TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n",
-+					page->index, SQUASHFS_I(inode)->start_block);
-+
-+	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
-+					PAGE_CACHE_SHIFT))
-+		goto out;
-+
-+	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
-+					|| index < file_end) {
-+		block_list = kmalloc(SIZE, GFP_KERNEL);
-+		if (block_list == NULL) {
-+			ERROR("Failed to allocate block_list\n");
-+			goto error_out;
-+		}
-+
-+		block = (msblk->read_blocklist)(inode, index, 1, block_list, NULL, &bsize);
-+		if (block == 0)
-+			goto error_out;
-+
-+		if (bsize == 0) { /* hole */
-+			bytes = index == file_end ?
-+				(i_size_read(inode) & (sblk->block_size - 1)) : sblk->block_size;
-+			sparse = 1;
-+		} else {
-+			mutex_lock(&msblk->read_page_mutex);
-+		
-+			bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block,
-+				bsize, NULL, sblk->block_size);
-+
-+			if (bytes == 0) {
-+				ERROR("Unable to read page, block %llx, size %x\n", block, bsize);
-+				mutex_unlock(&msblk->read_page_mutex);
-+				goto error_out;
-+			}
-+		}
-+	} else {
-+		fragment = get_cached_fragment(inode->i_sb,
-+					SQUASHFS_I(inode)-> u.s1.fragment_start_block,
-+					SQUASHFS_I(inode)->u.s1.fragment_size);
-+
-+		if (fragment == NULL) {
-+			ERROR("Unable to read page, block %llx, size %x\n",
-+					SQUASHFS_I(inode)->u.s1.fragment_start_block,
-+					(int) SQUASHFS_I(inode)->u.s1.fragment_size);
-+			goto error_out;
-+		}
-+		bytes = i_size_read(inode) & (sblk->block_size - 1);
-+		data_ptr = fragment->data + SQUASHFS_I(inode)->u.s1.fragment_offset;
-+	}
-+
-+	for (i = start_index; i <= end_index && bytes > 0; i++,
-+						bytes -= PAGE_CACHE_SIZE, data_ptr += PAGE_CACHE_SIZE) {
-+		struct page *push_page;
-+		int avail = sparse ? 0 : min_t(unsigned int, bytes, PAGE_CACHE_SIZE);
-+
-+		TRACE("bytes %d, i %d, available_bytes %d\n", bytes, i, avail);
-+
-+		push_page = (i == page->index) ? page :
-+			grab_cache_page_nowait(page->mapping, i);
-+
-+		if (!push_page)
-+			continue;
-+
-+		if (PageUptodate(push_page))
-+			goto skip_page;
-+
-+ 		pageaddr = kmap_atomic(push_page, KM_USER0);
-+		memcpy(pageaddr, data_ptr, avail);
-+		memset(pageaddr + avail, 0, PAGE_CACHE_SIZE - avail);
-+		kunmap_atomic(pageaddr, KM_USER0);
-+		flush_dcache_page(push_page);
-+		SetPageUptodate(push_page);
-+skip_page:
-+		unlock_page(push_page);
-+		if(i != page->index)
-+			page_cache_release(push_page);
-+	}
-+
-+	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
-+					|| index < file_end) {
-+		if (!sparse)
-+			mutex_unlock(&msblk->read_page_mutex);
-+		kfree(block_list);
-+	} else
-+		release_cached_fragment(msblk, fragment);
-+
-+	return 0;
-+
-+error_out:
-+	SetPageError(page);
-+out:
-+	pageaddr = kmap_atomic(page, KM_USER0);
-+	memset(pageaddr, 0, PAGE_CACHE_SIZE);
-+	kunmap_atomic(pageaddr, KM_USER0);
-+	flush_dcache_page(page);
-+	if (!PageError(page))
-+		SetPageUptodate(page);
-+	unlock_page(page);
-+
-+	kfree(block_list);
-+	return 0;
-+}
-+
-+
-+static int get_dir_index_using_offset(struct super_block *s,
-+				long long *next_block, unsigned int *next_offset,
-+				long long index_start, unsigned int index_offset, int i_count,
-+				long long f_pos)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	struct squashfs_dir_index index;
-+
-+	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
-+					i_count, (unsigned int) f_pos);
-+
-+	f_pos =- 3;
-+	if (f_pos == 0)
-+		goto finish;
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index sindex;
-+			squashfs_get_cached_block(s, &sindex, index_start, index_offset,
-+					sizeof(sindex), &index_start, &index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX(&index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, &index, index_start, index_offset,
-+					sizeof(index), &index_start, &index_offset);
-+
-+		if (index.index > f_pos)
-+			break;
-+
-+		squashfs_get_cached_block(s, NULL, index_start, index_offset,
-+					index.size + 1, &index_start, &index_offset);
-+
-+		length = index.index;
-+		*next_block = index.start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+
-+finish:
-+	return length + 3;
-+}
-+
-+
-+static int get_dir_index_using_name(struct super_block *s,
-+				long long *next_block, unsigned int *next_offset,
-+				long long index_start, unsigned int index_offset, int i_count,
-+				const char *name, int size)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	struct squashfs_dir_index *index;
-+	char *str;
-+
-+	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
-+
-+	str = kmalloc(sizeof(struct squashfs_dir_index) +
-+		(SQUASHFS_NAME_LEN + 1) * 2, GFP_KERNEL);
-+	if (str == NULL) {
-+		ERROR("Failed to allocate squashfs_dir_index\n");
-+		goto failure;
-+	}
-+
-+	index = (struct squashfs_dir_index *) (str + SQUASHFS_NAME_LEN + 1);
-+	strncpy(str, name, size);
-+	str[size] = '\0';
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index sindex;
-+			squashfs_get_cached_block(s, &sindex, index_start, index_offset,
-+				sizeof(sindex), &index_start, &index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX(index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, index, index_start, index_offset,
-+				sizeof(struct squashfs_dir_index), &index_start, &index_offset);
-+
-+		squashfs_get_cached_block(s, index->name, index_start, index_offset,
-+					index->size + 1, &index_start, &index_offset);
-+
-+		index->name[index->size + 1] = '\0';
-+
-+		if (strcmp(index->name, str) > 0)
-+			break;
-+
-+		length = index->index;
-+		*next_block = index->start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+	kfree(str);
-+
-+failure:
-+	return length + 3;
-+}
-+
-+		
-+static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir)
-+{
-+	struct inode *i = file->f_dentry->d_inode;
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+		sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0, dir_count;
-+	struct squashfs_dir_header dirh;
-+	struct squashfs_dir_entry *dire;
-+
-+	TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset);
-+
-+	dire = kmalloc(sizeof(struct squashfs_dir_entry) +
-+		SQUASHFS_NAME_LEN + 1, GFP_KERNEL);
-+	if (dire == NULL) {
-+		ERROR("Failed to allocate squashfs_dir_entry\n");
-+		goto finish;
-+	}
-+
-+	while(file->f_pos < 3) {
-+		char *name;
-+		int size, i_ino;
-+
-+		if(file->f_pos == 0) {
-+			name = ".";
-+			size = 1;
-+			i_ino = i->i_ino;
-+		} else {
-+			name = "..";
-+			size = 2;
-+			i_ino = SQUASHFS_I(i)->u.s2.parent_inode;
-+		}
-+		TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n",
-+				(unsigned int) dirent, name, size, (int)
-+				file->f_pos, i_ino, squashfs_filetype_table[1]);
-+
-+		if (filldir(dirent, name, size, file->f_pos, i_ino,
-+				squashfs_filetype_table[1]) < 0) {
-+				TRACE("Filldir returned less than 0\n");
-+			goto finish;
-+		}
-+		file->f_pos += size;
-+	}
-+
-+	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count, file->f_pos);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header sdirh;
-+			
-+			if (!squashfs_get_cached_block(i->i_sb, &sdirh, next_block,
-+					 next_offset, sizeof(sdirh), &next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, &dirh, next_block,
-+					next_offset, sizeof(dirh), &next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, &sdire, next_block,
-+						next_offset, sizeof(sdire), &next_block, &next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, dire, next_block,
-+						next_offset, sizeof(*dire), &next_block, &next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name, next_block,
-+						next_offset, dire->size + 1, &next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (file->f_pos >= length)
-+				continue;
-+
-+			dire->name[dire->size + 1] = '\0';
-+
-+			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n",
-+					(unsigned int) dirent, dire->name, dire->size + 1,
-+					(int) file->f_pos, dirh.start_block, dire->offset,
-+					dirh.inode_number + dire->inode_number,
-+					squashfs_filetype_table[dire->type]);
-+
-+			if (filldir(dirent, dire->name, dire->size + 1, file->f_pos,
-+					dirh.inode_number + dire->inode_number,
-+					squashfs_filetype_table[dire->type]) < 0) {
-+				TRACE("Filldir returned less than 0\n");
-+				goto finish;
-+			}
-+			file->f_pos = length;
-+		}
-+	}
-+
-+finish:
-+	kfree(dire);
-+	return 0;
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	kfree(dire);
-+	return 0;
-+}
-+
-+
-+static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry,
-+				struct nameidata *nd)
-+{
-+	const unsigned char *name = dentry->d_name.name;
-+	int len = dentry->d_name.len;
-+	struct inode *inode = NULL;
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+				sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0, dir_count;
-+	struct squashfs_dir_header dirh;
-+	struct squashfs_dir_entry *dire;
-+
-+	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
-+
-+	dire = kmalloc(sizeof(struct squashfs_dir_entry) +
-+		SQUASHFS_NAME_LEN + 1, GFP_KERNEL);
-+	if (dire == NULL) {
-+		ERROR("Failed to allocate squashfs_dir_entry\n");
-+		goto exit_lookup;
-+	}
-+
-+	if (len > SQUASHFS_NAME_LEN)
-+		goto exit_lookup;
-+
-+	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count, name, len);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header sdirh;
-+			if (!squashfs_get_cached_block(i->i_sb, &sdirh, next_block,
-+					 next_offset, sizeof(sdirh), &next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, &dirh, next_block,
-+					next_offset, sizeof(dirh), &next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, &sdire, next_block,
-+						next_offset, sizeof(sdire), &next_block, &next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, dire, next_block,
-+						next_offset, sizeof(*dire), &next_block, &next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name, next_block,
-+					next_offset, dire->size + 1, &next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (name[0] < dire->name[0])
-+				goto exit_lookup;
-+
-+			if ((len == dire->size + 1) && !strncmp(name, dire->name, len)) {
-+				squashfs_inode_t ino = SQUASHFS_MKINODE(dirh.start_block,
-+								dire->offset);
-+
-+				TRACE("calling squashfs_iget for directory entry %s, inode"
-+					"  %x:%x, %d\n", name, dirh.start_block, dire->offset,
-+					dirh.inode_number + dire->inode_number);
-+
-+				inode = squashfs_iget(i->i_sb, ino, dirh.inode_number + dire->inode_number);
-+
-+				goto exit_lookup;
-+			}
-+		}
-+	}
-+
-+exit_lookup:
-+	kfree(dire);
-+	if (inode)
-+		return d_splice_alias(inode, dentry);
-+	d_add(dentry, inode);
-+	return ERR_PTR(0);
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	goto exit_lookup;
-+}
-+
-+
-+static int squashfs_remount(struct super_block *s, int *flags, char *data)
-+{
-+	*flags |= MS_RDONLY;
-+	return 0;
-+}
-+
-+
-+static void squashfs_put_super(struct super_block *s)
-+{
-+	int i;
-+
-+	if (s->s_fs_info) {
-+		struct squashfs_sb_info *sbi = s->s_fs_info;
-+		if (sbi->block_cache)
-+			for (i = 0; i < squashfs_cached_blks; i++)
-+				if (sbi->block_cache[i].block != SQUASHFS_INVALID_BLK)
-+					vfree(sbi->block_cache[i].data);
-+		if (sbi->fragment)
-+			for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) 
-+				vfree(sbi->fragment[i].data);
-+		kfree(sbi->fragment);
-+		kfree(sbi->block_cache);
-+		vfree(sbi->read_page);
-+		kfree(sbi->uid);
-+		kfree(sbi->fragment_index);
-+		kfree(sbi->fragment_index_2);
-+		kfree(sbi->meta_index);
-+		vfree(sbi->stream.workspace);
-+		kfree(s->s_fs_info);
-+		s->s_fs_info = NULL;
-+	}
-+}
-+
-+
-+static int squashfs_get_sb(struct file_system_type *fs_type, int flags,
-+				const char *dev_name, void *data, struct vfsmount *mnt)
-+{
-+	return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super,
-+				mnt);
-+}
-+
-+
-+static int __init init_squashfs_fs(void)
-+{
-+	int err = init_inodecache();
-+	if (err)
-+		goto out;
-+
-+	printk(KERN_INFO "squashfs: version 3.3 (2007/10/31) "
-+		"Phillip Lougher\n");
-+
-+	err = register_filesystem(&squashfs_fs_type);
-+	if (err)
-+		destroy_inodecache();
-+
-+out:
-+	return err;
-+}
-+
-+
-+static void __exit exit_squashfs_fs(void)
-+{
-+	unregister_filesystem(&squashfs_fs_type);
-+	destroy_inodecache();
-+}
-+
-+
-+static struct kmem_cache * squashfs_inode_cachep;
-+
-+
-+static struct inode *squashfs_alloc_inode(struct super_block *sb)
-+{
-+	struct squashfs_inode_info *ei;
-+	ei = kmem_cache_alloc(squashfs_inode_cachep, GFP_KERNEL);
-+	return ei ? &ei->vfs_inode : NULL;
-+}
-+
-+
-+static void squashfs_destroy_inode(struct inode *inode)
-+{
-+	kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode));
-+}
-+
-+
-+static void init_once(struct kmem_cache *cachep, void *foo)
-+{
-+	struct squashfs_inode_info *ei = foo;
-+
-+	inode_init_once(&ei->vfs_inode);
-+}
-+ 
-+
-+static int __init init_inodecache(void)
-+{
-+	squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache",
-+	    sizeof(struct squashfs_inode_info), 0,
-+		SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT, init_once);
-+	if (squashfs_inode_cachep == NULL)
-+		return -ENOMEM;
-+	return 0;
-+}
-+
-+
-+static void destroy_inodecache(void)
-+{
-+	kmem_cache_destroy(squashfs_inode_cachep);
-+}
-+
-+
-+module_init(init_squashfs_fs);
-+module_exit(exit_squashfs_fs);
-+MODULE_DESCRIPTION("squashfs 3.2-r2-CVS, a compressed read-only filesystem");
-+MODULE_AUTHOR("Phillip Lougher <phillip@lougher.demon.co.uk>");
-+MODULE_LICENSE("GPL");
-diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/Makefile linux-2.6.24-squashfs3.3/fs/squashfs/Makefile
---- linux-2.6.24/fs/squashfs/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/fs/squashfs/Makefile	2005-11-20 14:31:00.000000000 +0000
-@@ -0,0 +1,7 @@
-+#
-+# Makefile for the linux squashfs routines.
-+#
-+
-+obj-$(CONFIG_SQUASHFS) += squashfs.o
-+squashfs-y += inode.o
-+squashfs-y += squashfs2_0.o
-diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/squashfs2_0.c linux-2.6.24-squashfs3.3/fs/squashfs/squashfs2_0.c
---- linux-2.6.24/fs/squashfs/squashfs2_0.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/fs/squashfs/squashfs2_0.c	2007-10-25 00:43:59.000000000 +0100
-@@ -0,0 +1,740 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007
-+ * Phillip Lougher <phillip@lougher.demon.co.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs2_0.c
-+ */
-+
-+#include <linux/squashfs_fs.h>
-+#include <linux/module.h>
-+#include <linux/zlib.h>
-+#include <linux/fs.h>
-+#include <linux/squashfs_fs_sb.h>
-+#include <linux/squashfs_fs_i.h>
-+
-+#include "squashfs.h"
-+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir);
-+static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *,
-+				struct nameidata *);
-+
-+static struct file_operations squashfs_dir_ops_2 = {
-+	.read = generic_read_dir,
-+	.readdir = squashfs_readdir_2
-+};
-+
-+static struct inode_operations squashfs_dir_inode_ops_2 = {
-+	.lookup = squashfs_lookup_2
-+};
-+
-+static unsigned char squashfs_filetype_table[] = {
-+	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
-+};
-+
-+static int read_fragment_index_table_2(struct super_block *s)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2
-+					(sblk->fragments), GFP_KERNEL))) {
-+		ERROR("Failed to allocate uid/gid table\n");
-+		return 0;
-+	}
-+   
-+	if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) &&
-+					!squashfs_read_data(s, (char *)
-+					msblk->fragment_index_2,
-+					sblk->fragment_table_start,
-+					SQUASHFS_FRAGMENT_INDEX_BYTES_2
-+					(sblk->fragments) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments))) {
-+		ERROR("unable to read fragment index table\n");
-+		return 0;
-+	}
-+
-+	if (msblk->swap) {
-+		int i;
-+		unsigned int fragment;
-+
-+		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments);
-+									i++) {
-+			SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment),
-+						&msblk->fragment_index_2[i], 1);
-+			msblk->fragment_index_2[i] = fragment;
-+		}
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int get_fragment_location_2(struct super_block *s, unsigned int fragment,
-+				long long *fragment_start_block,
-+				unsigned int *fragment_size)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	long long start_block =
-+		msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)];
-+	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment);
-+	struct squashfs_fragment_entry_2 fragment_entry;
-+
-+	if (msblk->swap) {
-+		struct squashfs_fragment_entry_2 sfragment_entry;
-+
-+		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
-+					start_block, offset,
-+					sizeof(sfragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+		SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry);
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
-+					start_block, offset,
-+					sizeof(fragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+
-+	*fragment_start_block = fragment_entry.start_block;
-+	*fragment_size = fragment_entry.size;
-+
-+	return 1;
-+
-+out:
-+	return 0;
-+}
-+
-+
-+static void squashfs_new_inode(struct squashfs_sb_info *msblk, struct inode *i,
-+		struct squashfs_base_inode_header_2 *inodeb, unsigned int ino)
-+{
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	i->i_ino = ino;
-+	i->i_mtime.tv_sec = sblk->mkfs_time;
-+	i->i_atime.tv_sec = sblk->mkfs_time;
-+	i->i_ctime.tv_sec = sblk->mkfs_time;
-+	i->i_uid = msblk->uid[inodeb->uid];
-+	i->i_mode = inodeb->mode;
-+	i->i_nlink = 1;
-+	i->i_size = 0;
-+	if (inodeb->guid == SQUASHFS_GUIDS)
-+		i->i_gid = i->i_uid;
-+	else
-+		i->i_gid = msblk->guid[inodeb->guid];
-+}
-+
-+
-+static int squashfs_read_inode_2(struct inode *i, squashfs_inode_t inode)
-+{
-+	struct super_block *s = i->i_sb;
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned int block = SQUASHFS_INODE_BLK(inode) +
-+		sblk->inode_table_start;
-+	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
-+	unsigned int ino = SQUASHFS_MK_VFS_INODE(block -
-+		sblk->inode_table_start, offset);
-+	long long next_block;
-+	unsigned int next_offset;
-+	union squashfs_inode_header_2 id, sid;
-+	struct squashfs_base_inode_header_2 *inodeb = &id.base,
-+					  *sinodeb = &sid.base;
-+
-+	TRACE("Entered squashfs_read_inode_2\n");
-+
-+	if (msblk->swap) {
-+		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
-+					offset, sizeof(*sinodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+		SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb,
-+					sizeof(*sinodeb));
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
-+					offset, sizeof(*inodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+
-+	squashfs_new_inode(msblk, i, inodeb, ino);
-+
-+	switch(inodeb->inode_type) {
-+		case SQUASHFS_FILE_TYPE: {
-+			struct squashfs_reg_inode_header_2 *inodep = &id.reg;
-+			struct squashfs_reg_inode_header_2 *sinodep = &sid.reg;
-+			long long frag_blk;
-+			unsigned int frag_size = 0;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
-+					!get_fragment_location_2(s,
-+					inodep->fragment, &frag_blk, &frag_size))
-+				goto failed_read;
-+				
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_mtime.tv_sec = inodep->mtime;
-+			i->i_atime.tv_sec = inodep->mtime;
-+			i->i_ctime.tv_sec = inodep->mtime;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			i->i_data.a_ops = &squashfs_aops;
-+
-+			TRACE("File inode %x:%x, start_block %x, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_DIR_TYPE: {
-+			struct squashfs_dir_inode_header_2 *inodep = &id.dir;
-+			struct squashfs_dir_inode_header_2 *sinodep = &sid.dir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops_2;
-+			i->i_fop = &squashfs_dir_ops_2;
-+			i->i_mode |= S_IFDIR;
-+			i->i_mtime.tv_sec = inodep->mtime;
-+			i->i_atime.tv_sec = inodep->mtime;
-+			i->i_ctime.tv_sec = inodep->mtime;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
-+			SQUASHFS_I(i)->u.s2.parent_inode = 0;
-+
-+			TRACE("Directory inode %x:%x, start_block %x, offset "
-+					"%x\n", SQUASHFS_INODE_BLK(inode),
-+					offset, inodep->start_block,
-+					inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_LDIR_TYPE: {
-+			struct squashfs_ldir_inode_header_2 *inodep = &id.ldir;
-+			struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep,
-+						sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops_2;
-+			i->i_fop = &squashfs_dir_ops_2;
-+			i->i_mode |= S_IFDIR;
-+			i->i_mtime.tv_sec = inodep->mtime;
-+			i->i_atime.tv_sec = inodep->mtime;
-+			i->i_ctime.tv_sec = inodep->mtime;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
-+			SQUASHFS_I(i)->u.s2.directory_index_offset =
-+								next_offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count =
-+								inodep->i_count;
-+			SQUASHFS_I(i)->u.s2.parent_inode = 0;
-+
-+			TRACE("Long directory inode %x:%x, start_block %x, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_SYMLINK_TYPE: {
-+			struct squashfs_symlink_inode_header_2 *inodep =
-+								&id.symlink;
-+			struct squashfs_symlink_inode_header_2 *sinodep =
-+								&sid.symlink;
-+	
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep,
-+								sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			i->i_size = inodep->symlink_size;
-+			i->i_op = &page_symlink_inode_operations;
-+			i->i_data.a_ops = &squashfs_symlink_aops;
-+			i->i_mode |= S_IFLNK;
-+			SQUASHFS_I(i)->start_block = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+
-+			TRACE("Symbolic link inode %x:%x, start_block %llx, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					next_block, next_offset);
-+			break;
-+		 }
-+		 case SQUASHFS_BLKDEV_TYPE:
-+		 case SQUASHFS_CHRDEV_TYPE: {
-+			struct squashfs_dev_inode_header_2 *inodep = &id.dev;
-+			struct squashfs_dev_inode_header_2 *sinodep = &sid.dev;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			i->i_mode |= (inodeb->inode_type ==
-+					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
-+					S_IFBLK;
-+			init_special_inode(i, i->i_mode,
-+					old_decode_dev(inodep->rdev));
-+
-+			TRACE("Device inode %x:%x, rdev %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->rdev);
-+			break;
-+		 }
-+		 case SQUASHFS_FIFO_TYPE:
-+		 case SQUASHFS_SOCKET_TYPE: {
-+
-+			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
-+							? S_IFIFO : S_IFSOCK;
-+			init_special_inode(i, i->i_mode, 0);
-+			break;
-+		 }
-+		 default:
-+			ERROR("Unknown inode type %d in squashfs_iget!\n",
-+					inodeb->inode_type);
-+			goto failed_read1;
-+	}
-+	
-+	return 1;
-+
-+failed_read:
-+	ERROR("Unable to read inode [%x:%x]\n", block, offset);
-+
-+failed_read1:
-+	return 0;
-+}
-+
-+
-+static int get_dir_index_using_offset(struct super_block *s, long long 
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				long long f_pos)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	struct squashfs_dir_index_2 index;
-+
-+	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
-+					i_count, (unsigned int) f_pos);
-+
-+	if (f_pos == 0)
-+		goto finish;
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index_2 sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) &index,
-+					index_start, index_offset,
-+					sizeof(index), &index_start,
-+					&index_offset);
-+
-+		if (index.index > f_pos)
-+			break;
-+
-+		squashfs_get_cached_block(s, NULL, index_start, index_offset,
-+					index.size + 1, &index_start,
-+					&index_offset);
-+
-+		length = index.index;
-+		*next_block = index.start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+
-+finish:
-+	return length;
-+}
-+
-+
-+static int get_dir_index_using_name(struct super_block *s, long long
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				const char *name, int size)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	struct squashfs_dir_index_2 *index;
-+	char *str;
-+
-+	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
-+
-+	if (!(str = kmalloc(sizeof(struct squashfs_dir_index) +
-+		(SQUASHFS_NAME_LEN + 1) * 2, GFP_KERNEL))) {
-+		ERROR("Failed to allocate squashfs_dir_index\n");
-+		goto failure;
-+	}
-+
-+	index = (struct squashfs_dir_index_2 *) (str + SQUASHFS_NAME_LEN + 1);
-+	strncpy(str, name, size);
-+	str[size] = '\0';
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index_2 sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) index,
-+					index_start, index_offset,
-+					sizeof(struct squashfs_dir_index_2),
-+					&index_start, &index_offset);
-+
-+		squashfs_get_cached_block(s, index->name, index_start,
-+					index_offset, index->size + 1,
-+					&index_start, &index_offset);
-+
-+		index->name[index->size + 1] = '\0';
-+
-+		if (strcmp(index->name, str) > 0)
-+			break;
-+
-+		length = index->index;
-+		*next_block = index->start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+	kfree(str);
-+failure:
-+	return length;
-+}
-+
-+		
-+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir)
-+{
-+	struct inode *i = file->f_dentry->d_inode;
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+		sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0,
-+		dir_count;
-+	struct squashfs_dir_header_2 dirh;
-+	struct squashfs_dir_entry_2 *dire;
-+
-+	TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset);
-+
-+	if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) +
-+		SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) {
-+		ERROR("Failed to allocate squashfs_dir_entry\n");
-+		goto finish;
-+	}
-+
-+	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count,
-+				file->f_pos);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header_2 sdirh;
-+			
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry_2 sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block, next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block, next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+						next_block, next_offset,
-+						dire->size + 1, &next_block,
-+						&next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (file->f_pos >= length)
-+				continue;
-+
-+			dire->name[dire->size + 1] = '\0';
-+
-+			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n",
-+					(unsigned int) dirent, dire->name,
-+					dire->size + 1, (int) file->f_pos,
-+					dirh.start_block, dire->offset,
-+					squashfs_filetype_table[dire->type]);
-+
-+			if (filldir(dirent, dire->name, dire->size + 1,
-+					file->f_pos, SQUASHFS_MK_VFS_INODE(
-+					dirh.start_block, dire->offset),
-+					squashfs_filetype_table[dire->type])
-+					< 0) {
-+				TRACE("Filldir returned less than 0\n");
-+				goto finish;
-+			}
-+			file->f_pos = length;
-+		}
-+	}
-+
-+finish:
-+	kfree(dire);
-+	return 0;
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	kfree(dire);
-+	return 0;
-+}
-+
-+
-+static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry,
-+				struct nameidata *nd)
-+{
-+	const unsigned char *name = dentry->d_name.name;
-+	int len = dentry->d_name.len;
-+	struct inode *inode = NULL;
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+				sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0,
-+				dir_count;
-+	struct squashfs_dir_header_2 dirh;
-+	struct squashfs_dir_entry_2 *dire;
-+	int sorted = sblk->s_major == 2 && sblk->s_minor >= 1;
-+
-+	TRACE("Entered squashfs_lookup_2 [%llx:%x]\n", next_block, next_offset);
-+
-+	if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) +
-+		SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) {
-+		ERROR("Failed to allocate squashfs_dir_entry\n");
-+		goto exit_loop;
-+	}
-+
-+	if (len > SQUASHFS_NAME_LEN)
-+		goto exit_loop;
-+
-+	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count, name,
-+				len);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header_2 sdirh;
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry_2 sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block,next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block,next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+					next_block, next_offset, dire->size + 1,
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (sorted && name[0] < dire->name[0])
-+				goto exit_loop;
-+
-+			if ((len == dire->size + 1) && !strncmp(name,
-+						dire->name, len)) {
-+				squashfs_inode_t ino =
-+					SQUASHFS_MKINODE(dirh.start_block,
-+					dire->offset);
-+				unsigned int inode_number = SQUASHFS_MK_VFS_INODE(dirh.start_block,
-+					dire->offset);
-+
-+				TRACE("calling squashfs_iget for directory "
-+					"entry %s, inode %x:%x, %lld\n", name,
-+					dirh.start_block, dire->offset, ino);
-+
-+				inode = squashfs_iget(i->i_sb, ino, inode_number);
-+
-+				goto exit_loop;
-+			}
-+		}
-+	}
-+
-+exit_loop:
-+	kfree(dire);
-+	d_add(dentry, inode);
-+	return ERR_PTR(0);
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	goto exit_loop;
-+}
-+
-+
-+int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	msblk->read_inode = squashfs_read_inode_2;
-+	msblk->read_fragment_index_table = read_fragment_index_table_2;
-+
-+	sblk->bytes_used = sblk->bytes_used_2;
-+	sblk->uid_start = sblk->uid_start_2;
-+	sblk->guid_start = sblk->guid_start_2;
-+	sblk->inode_table_start = sblk->inode_table_start_2;
-+	sblk->directory_table_start = sblk->directory_table_start_2;
-+	sblk->fragment_table_start = sblk->fragment_table_start_2;
-+
-+	return 1;
-+}
-diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/squashfs.h linux-2.6.24-squashfs3.3/fs/squashfs/squashfs.h
---- linux-2.6.24/fs/squashfs/squashfs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/fs/squashfs/squashfs.h	2007-08-19 04:23:16.000000000 +0100
-@@ -0,0 +1,86 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007
-+ * Phillip Lougher <phillip@lougher.demon.co.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs.h
-+ */
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+#endif
-+
-+#ifdef SQUASHFS_TRACE
-+#define TRACE(s, args...)	printk(KERN_NOTICE "SQUASHFS: "s, ## args)
-+#else
-+#define TRACE(s, args...)	{}
-+#endif
-+
-+#define ERROR(s, args...)	printk(KERN_ERR "SQUASHFS error: "s, ## args)
-+
-+#define SERROR(s, args...)	do { \
-+				if (!silent) \
-+				printk(KERN_ERR "SQUASHFS error: "s, ## args);\
-+				} while(0)
-+
-+#define WARNING(s, args...)	printk(KERN_WARNING "SQUASHFS: "s, ## args)
-+
-+static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode)
-+{
-+	return list_entry(inode, struct squashfs_inode_info, vfs_inode);
-+}
-+
-+#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY)
-+#define SQSH_EXTERN
-+extern unsigned int squashfs_read_data(struct super_block *s, char *buffer,
-+				long long index, unsigned int length,
-+				long long *next_index, int srclength);
-+extern int squashfs_get_cached_block(struct super_block *s, void *buffer,
-+				long long block, unsigned int offset,
-+				int length, long long *next_block,
-+				unsigned int *next_offset);
-+extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct
-+					squashfs_fragment_cache *fragment);
-+extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block
-+					*s, long long start_block,
-+					int length);
-+extern struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode, unsigned int inode_number);
-+extern const struct address_space_operations squashfs_symlink_aops;
-+extern const struct address_space_operations squashfs_aops;
-+extern struct inode_operations squashfs_dir_inode_ops;
-+#else
-+#define SQSH_EXTERN static
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk);
-+#else
-+static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	return 0;
-+}
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk);
-+#else
-+static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	return 0;
-+}
-+#endif
-diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs.h
---- linux-2.6.24/include/linux/squashfs_fs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs.h	2007-11-01 03:50:57.000000000 +0000
-@@ -0,0 +1,935 @@
-+#ifndef SQUASHFS_FS
-+#define SQUASHFS_FS
-+
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007
-+ * Phillip Lougher <phillip@lougher.demon.co.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs.h
-+ */
-+
-+#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#define CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#endif
-+
-+#define SQUASHFS_CACHED_FRAGMENTS	CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE	
-+#define SQUASHFS_MAJOR			3
-+#define SQUASHFS_MINOR			1
-+#define SQUASHFS_MAGIC			0x73717368
-+#define SQUASHFS_MAGIC_SWAP		0x68737173
-+#define SQUASHFS_START			0
-+
-+/* size of metadata (inode and directory) blocks */
-+#define SQUASHFS_METADATA_SIZE		8192
-+#define SQUASHFS_METADATA_LOG		13
-+
-+/* default size of data blocks */
-+#define SQUASHFS_FILE_SIZE		131072
-+#define SQUASHFS_FILE_LOG		17
-+
-+#define SQUASHFS_FILE_MAX_SIZE		1048576
-+
-+/* Max number of uids and gids */
-+#define SQUASHFS_UIDS			256
-+#define SQUASHFS_GUIDS			255
-+
-+/* Max length of filename (not 255) */
-+#define SQUASHFS_NAME_LEN		256
-+
-+#define SQUASHFS_INVALID		((long long) 0xffffffffffff)
-+#define SQUASHFS_INVALID_FRAG		((unsigned int) 0xffffffff)
-+#define SQUASHFS_INVALID_BLK		((long long) -1)
-+#define SQUASHFS_USED_BLK		((long long) -2)
-+
-+/* Filesystem flags */
-+#define SQUASHFS_NOI			0
-+#define SQUASHFS_NOD			1
-+#define SQUASHFS_CHECK			2
-+#define SQUASHFS_NOF			3
-+#define SQUASHFS_NO_FRAG		4
-+#define SQUASHFS_ALWAYS_FRAG		5
-+#define SQUASHFS_DUPLICATE		6
-+#define SQUASHFS_EXPORT			7
-+
-+#define SQUASHFS_BIT(flag, bit)		((flag >> bit) & 1)
-+
-+#define SQUASHFS_UNCOMPRESSED_INODES(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOI)
-+
-+#define SQUASHFS_UNCOMPRESSED_DATA(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOD)
-+
-+#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOF)
-+
-+#define SQUASHFS_NO_FRAGMENTS(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_NO_FRAG)
-+
-+#define SQUASHFS_ALWAYS_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_ALWAYS_FRAG)
-+
-+#define SQUASHFS_DUPLICATES(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_DUPLICATE)
-+
-+#define SQUASHFS_EXPORTABLE(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_EXPORT)
-+
-+#define SQUASHFS_CHECK_DATA(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_CHECK)
-+
-+#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \
-+		duplicate_checking, exortable)	(noi | (nod << 1) | (check_data << 2) \
-+		| (nof << 3) | (no_frag << 4) | (always_frag << 5) | \
-+		(duplicate_checking << 6) | (exportable << 7))
-+
-+/* Max number of types and file types */
-+#define SQUASHFS_DIR_TYPE		1
-+#define SQUASHFS_FILE_TYPE		2
-+#define SQUASHFS_SYMLINK_TYPE		3
-+#define SQUASHFS_BLKDEV_TYPE		4
-+#define SQUASHFS_CHRDEV_TYPE		5
-+#define SQUASHFS_FIFO_TYPE		6
-+#define SQUASHFS_SOCKET_TYPE		7
-+#define SQUASHFS_LDIR_TYPE		8
-+#define SQUASHFS_LREG_TYPE		9
-+
-+/* 1.0 filesystem type definitions */
-+#define SQUASHFS_TYPES			5
-+#define SQUASHFS_IPC_TYPE		0
-+
-+/* Flag whether block is compressed or uncompressed, bit is set if block is
-+ * uncompressed */
-+#define SQUASHFS_COMPRESSED_BIT		(1 << 15)
-+
-+#define SQUASHFS_COMPRESSED_SIZE(B)	(((B) & ~SQUASHFS_COMPRESSED_BIT) ? \
-+		(B) & ~SQUASHFS_COMPRESSED_BIT :  SQUASHFS_COMPRESSED_BIT)
-+
-+#define SQUASHFS_COMPRESSED(B)		(!((B) & SQUASHFS_COMPRESSED_BIT))
-+
-+#define SQUASHFS_COMPRESSED_BIT_BLOCK		(1 << 24)
-+
-+#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B)	((B) & \
-+	~SQUASHFS_COMPRESSED_BIT_BLOCK)
-+
-+#define SQUASHFS_COMPRESSED_BLOCK(B)	(!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK))
-+
-+/*
-+ * Inode number ops.  Inodes consist of a compressed block number, and an
-+ * uncompressed  offset within that block
-+ */
-+#define SQUASHFS_INODE_BLK(a)		((unsigned int) ((a) >> 16))
-+
-+#define SQUASHFS_INODE_OFFSET(a)	((unsigned int) ((a) & 0xffff))
-+
-+#define SQUASHFS_MKINODE(A, B)		((squashfs_inode_t)(((squashfs_inode_t) (A)\
-+					<< 16) + (B)))
-+
-+/* Compute 32 bit VFS inode number from squashfs inode number */
-+#define SQUASHFS_MK_VFS_INODE(a, b)	((unsigned int) (((a) << 8) + \
-+					((b) >> 2) + 1))
-+/* XXX */
-+
-+/* Translate between VFS mode and squashfs mode */
-+#define SQUASHFS_MODE(a)		((a) & 0xfff)
-+
-+/* fragment and fragment table defines */
-+#define SQUASHFS_FRAGMENT_BYTES(A)	((A) * sizeof(struct squashfs_fragment_entry))
-+
-+#define SQUASHFS_FRAGMENT_INDEX(A)	(SQUASHFS_FRAGMENT_BYTES(A) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A)	(SQUASHFS_FRAGMENT_BYTES(A) % \
-+						SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEXES(A)	((SQUASHFS_FRAGMENT_BYTES(A) + \
-+					SQUASHFS_METADATA_SIZE - 1) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_BYTES(A)	(SQUASHFS_FRAGMENT_INDEXES(A) *\
-+						sizeof(long long))
-+
-+/* inode lookup table defines */
-+#define SQUASHFS_LOOKUP_BYTES(A)	((A) * sizeof(squashfs_inode_t))
-+
-+#define SQUASHFS_LOOKUP_BLOCK(A)		(SQUASHFS_LOOKUP_BYTES(A) / \
-+						SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_LOOKUP_BLOCK_OFFSET(A)		(SQUASHFS_LOOKUP_BYTES(A) % \
-+						SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_LOOKUP_BLOCKS(A)	((SQUASHFS_LOOKUP_BYTES(A) + \
-+					SQUASHFS_METADATA_SIZE - 1) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_LOOKUP_BLOCK_BYTES(A)	(SQUASHFS_LOOKUP_BLOCKS(A) *\
-+					sizeof(long long))
-+
-+/* cached data constants for filesystem */
-+#define SQUASHFS_CACHED_BLKS		8
-+
-+#define SQUASHFS_MAX_FILE_SIZE_LOG	64
-+
-+#define SQUASHFS_MAX_FILE_SIZE		((long long) 1 << \
-+					(SQUASHFS_MAX_FILE_SIZE_LOG - 2))
-+
-+#define SQUASHFS_MARKER_BYTE		0xff
-+
-+/* meta index cache */
-+#define SQUASHFS_META_INDEXES	(SQUASHFS_METADATA_SIZE / sizeof(unsigned int))
-+#define SQUASHFS_META_ENTRIES	31
-+#define SQUASHFS_META_NUMBER	8
-+#define SQUASHFS_SLOTS		4
-+
-+struct meta_entry {
-+	long long		data_block;
-+	unsigned int		index_block;
-+	unsigned short		offset;
-+	unsigned short		pad;
-+};
-+
-+struct meta_index {
-+	unsigned int		inode_number;
-+	unsigned int		offset;
-+	unsigned short		entries;
-+	unsigned short		skip;
-+	unsigned short		locked;
-+	unsigned short		pad;
-+	struct meta_entry	meta_entry[SQUASHFS_META_ENTRIES];
-+};
-+
-+
-+/*
-+ * definitions for structures on disk
-+ */
-+
-+typedef long long		squashfs_block_t;
-+typedef long long		squashfs_inode_t;
-+
-+struct squashfs_super_block {
-+	unsigned int		s_magic;
-+	unsigned int		inodes;
-+	unsigned int		bytes_used_2;
-+	unsigned int		uid_start_2;
-+	unsigned int		guid_start_2;
-+	unsigned int		inode_table_start_2;
-+	unsigned int		directory_table_start_2;
-+	unsigned int		s_major:16;
-+	unsigned int		s_minor:16;
-+	unsigned int		block_size_1:16;
-+	unsigned int		block_log:16;
-+	unsigned int		flags:8;
-+	unsigned int		no_uids:8;
-+	unsigned int		no_guids:8;
-+	unsigned int		mkfs_time /* time of filesystem creation */;
-+	squashfs_inode_t	root_inode;
-+	unsigned int		block_size;
-+	unsigned int		fragments;
-+	unsigned int		fragment_table_start_2;
-+	long long		bytes_used;
-+	long long		uid_start;
-+	long long		guid_start;
-+	long long		inode_table_start;
-+	long long		directory_table_start;
-+	long long		fragment_table_start;
-+	long long		lookup_table_start;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_index {
-+	unsigned int		index;
-+	unsigned int		start_block;
-+	unsigned char		size;
-+	unsigned char		name[0];
-+} __attribute__ ((packed));
-+
-+#define SQUASHFS_BASE_INODE_HEADER		\
-+	unsigned int		inode_type:4;	\
-+	unsigned int		mode:12;	\
-+	unsigned int		uid:8;		\
-+	unsigned int		guid:8;		\
-+	unsigned int		mtime;		\
-+	unsigned int 		inode_number;
-+
-+struct squashfs_base_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	squashfs_block_t	start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	unsigned int		file_size;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_lreg_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	squashfs_block_t	start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	long long		file_size;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		start_block;
-+	unsigned int		parent_inode;
-+} __attribute__  ((packed));
-+
-+struct squashfs_ldir_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned int		file_size:27;
-+	unsigned int		offset:13;
-+	unsigned int		start_block;
-+	unsigned int		i_count:16;
-+	unsigned int		parent_inode;
-+	struct squashfs_dir_index	index[0];
-+} __attribute__  ((packed));
-+
-+union squashfs_inode_header {
-+	struct squashfs_base_inode_header	base;
-+	struct squashfs_dev_inode_header	dev;
-+	struct squashfs_symlink_inode_header	symlink;
-+	struct squashfs_reg_inode_header	reg;
-+	struct squashfs_lreg_inode_header	lreg;
-+	struct squashfs_dir_inode_header	dir;
-+	struct squashfs_ldir_inode_header	ldir;
-+	struct squashfs_ipc_inode_header	ipc;
-+};
-+	
-+struct squashfs_dir_entry {
-+	unsigned int		offset:13;
-+	unsigned int		type:3;
-+	unsigned int		size:8;
-+	int			inode_number:16;
-+	char			name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_header {
-+	unsigned int		count:8;
-+	unsigned int		start_block;
-+	unsigned int		inode_number;
-+} __attribute__ ((packed));
-+
-+struct squashfs_fragment_entry {
-+	long long		start_block;
-+	unsigned int		size;
-+	unsigned int		pending;
-+} __attribute__ ((packed));
-+
-+extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen);
-+extern int squashfs_uncompress_init(void);
-+extern int squashfs_uncompress_exit(void);
-+
-+/*
-+ * macros to convert each packed bitfield structure from little endian to big
-+ * endian and vice versa.  These are needed when creating or using a filesystem
-+ * on a machine with different byte ordering to the target architecture.
-+ *
-+ */
-+
-+#define SQUASHFS_SWAP_START \
-+	int bits;\
-+	int b_pos;\
-+	unsigned long long val;\
-+	unsigned char *s;\
-+	unsigned char *d;
-+
-+#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\
-+	SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->inodes, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\
-+	SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->s_major, d, 224, 16);\
-+	SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\
-+	SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\
-+	SQUASHFS_SWAP((s)->block_log, d, 272, 16);\
-+	SQUASHFS_SWAP((s)->flags, d, 288, 8);\
-+	SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\
-+	SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\
-+	SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\
-+	SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\
-+	SQUASHFS_SWAP((s)->block_size, d, 408, 32);\
-+	SQUASHFS_SWAP((s)->fragments, d, 440, 32);\
-+	SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\
-+	SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\
-+	SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\
-+	SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\
-+	SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\
-+	SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\
-+	SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\
-+	SQUASHFS_SWAP((s)->lookup_table_start, d, 888, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
-+	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 64, 32);
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_ipc_inode_header))\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_dev_inode_header)); \
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->rdev, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_reg_inode_header));\
-+	SQUASHFS_SWAP((s)->start_block, d, 96, 64);\
-+	SQUASHFS_SWAP((s)->fragment, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 224, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_lreg_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 128, 64);\
-+	SQUASHFS_SWAP((s)->fragment, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 224, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 256, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_dir_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 128, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 147, 13);\
-+	SQUASHFS_SWAP((s)->start_block, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_ldir_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 128, 27);\
-+	SQUASHFS_SWAP((s)->offset, d, 155, 13);\
-+	SQUASHFS_SWAP((s)->start_block, d, 168, 32);\
-+	SQUASHFS_SWAP((s)->i_count, d, 200, 16);\
-+	SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\
-+	SQUASHFS_SWAP((s)->index, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->size, d, 64, 8);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\
-+	SQUASHFS_SWAP((s)->count, d, 0, 8);\
-+	SQUASHFS_SWAP((s)->start_block, d, 8, 32);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\
-+	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
-+	SQUASHFS_SWAP((s)->type, d, 13, 3);\
-+	SQUASHFS_SWAP((s)->size, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\
-+	SQUASHFS_SWAP((s)->start_block, d, 0, 64);\
-+	SQUASHFS_SWAP((s)->size, d, 64, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_INODE_T(s, d) SQUASHFS_SWAP_LONG_LONGS(s, d, 1)
-+
-+#define SQUASHFS_SWAP_SHORTS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 2);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			16)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_INTS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 4);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			32)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 8);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			64)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * bits / 8);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			bits)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, bits);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n)
-+#define SQUASHFS_SWAP_LOOKUP_BLOCKS(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n)
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+
-+struct squashfs_base_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		type:4;
-+	unsigned int		offset:4;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		mtime;
-+	unsigned int		start_block;
-+	unsigned int		file_size:32;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+} __attribute__  ((packed));
-+
-+union squashfs_inode_header_1 {
-+	struct squashfs_base_inode_header_1	base;
-+	struct squashfs_dev_inode_header_1	dev;
-+	struct squashfs_symlink_inode_header_1	symlink;
-+	struct squashfs_reg_inode_header_1	reg;
-+	struct squashfs_dir_inode_header_1	dir;
-+	struct squashfs_ipc_inode_header_1	ipc;
-+};
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 4);\
-+	SQUASHFS_SWAP((s)->guid, d, 20, 4);
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_ipc_inode_header_1));\
-+	SQUASHFS_SWAP((s)->type, d, 24, 4);\
-+	SQUASHFS_SWAP((s)->offset, d, 28, 4);\
-+}
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_dev_inode_header_1));\
-+	SQUASHFS_SWAP((s)->rdev, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header_1));\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_reg_inode_header_1));\
-+	SQUASHFS_SWAP((s)->mtime, d, 24, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 56, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 88, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_dir_inode_header_1));\
-+	SQUASHFS_SWAP((s)->file_size, d, 24, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 43, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 56, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 88, 24);\
-+}
-+
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+
-+struct squashfs_dir_index_2 {
-+	unsigned int		index:27;
-+	unsigned int		start_block:29;
-+	unsigned char		size;
-+	unsigned char		name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_base_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		mtime;
-+	unsigned int		start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	unsigned int		file_size:32;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+} __attribute__  ((packed));
-+
-+struct squashfs_ldir_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		file_size:27;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+	unsigned int		i_count:16;
-+	struct squashfs_dir_index_2	index[0];
-+} __attribute__  ((packed));
-+
-+union squashfs_inode_header_2 {
-+	struct squashfs_base_inode_header_2	base;
-+	struct squashfs_dev_inode_header_2	dev;
-+	struct squashfs_symlink_inode_header_2	symlink;
-+	struct squashfs_reg_inode_header_2	reg;
-+	struct squashfs_dir_inode_header_2	dir;
-+	struct squashfs_ldir_inode_header_2	ldir;
-+	struct squashfs_ipc_inode_header_2	ipc;
-+};
-+	
-+struct squashfs_dir_header_2 {
-+	unsigned int		count:8;
-+	unsigned int		start_block:24;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_entry_2 {
-+	unsigned int		offset:13;
-+	unsigned int		type:3;
-+	unsigned int		size:8;
-+	char			name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_fragment_entry_2 {
-+	unsigned int		start_block;
-+	unsigned int		size;
-+} __attribute__ ((packed));
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \
-+	SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2))
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_dev_inode_header_2)); \
-+	SQUASHFS_SWAP((s)->rdev, d, 32, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header_2));\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_reg_inode_header_2));\
-+	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->fragment, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 128, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 160, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_dir_inode_header_2));\
-+	SQUASHFS_SWAP((s)->file_size, d, 32, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 51, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 96, 24);\
-+}
-+
-+#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_ldir_inode_header_2));\
-+	SQUASHFS_SWAP((s)->file_size, d, 32, 27);\
-+	SQUASHFS_SWAP((s)->offset, d, 59, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 72, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 104, 24);\
-+	SQUASHFS_SWAP((s)->i_count, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\
-+	SQUASHFS_SWAP((s)->index, d, 0, 27);\
-+	SQUASHFS_SWAP((s)->start_block, d, 27, 29);\
-+	SQUASHFS_SWAP((s)->size, d, 56, 8);\
-+}
-+#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\
-+	SQUASHFS_SWAP((s)->count, d, 0, 8);\
-+	SQUASHFS_SWAP((s)->start_block, d, 8, 24);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\
-+	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
-+	SQUASHFS_SWAP((s)->type, d, 13, 3);\
-+	SQUASHFS_SWAP((s)->size, d, 16, 8);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\
-+	SQUASHFS_SWAP((s)->start_block, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->size, d, 32, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n)
-+
-+/* fragment and fragment table defines */
-+#define SQUASHFS_FRAGMENT_BYTES_2(A)	(A * sizeof(struct squashfs_fragment_entry_2))
-+
-+#define SQUASHFS_FRAGMENT_INDEX_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) % \
-+						SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEXES_2(A)	((SQUASHFS_FRAGMENT_BYTES_2(A) + \
-+					SQUASHFS_METADATA_SIZE - 1) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A)	(SQUASHFS_FRAGMENT_INDEXES_2(A) *\
-+						sizeof(int))
-+
-+#endif
-+
-+#ifdef __KERNEL__
-+
-+/*
-+ * macros used to swap each structure entry, taking into account
-+ * bitfields and different bitfield placing conventions on differing
-+ * architectures
-+ */
-+
-+#include <asm/byteorder.h>
-+
-+#ifdef __BIG_ENDIAN
-+	/* convert from little endian to big endian */
-+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
-+		tbits, b_pos)
-+#else
-+	/* convert from big endian to little endian */ 
-+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
-+		tbits, 64 - tbits - b_pos)
-+#endif
-+
-+#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\
-+	b_pos = pos % 8;\
-+	val = 0;\
-+	s = (unsigned char *)p + (pos / 8);\
-+	d = ((unsigned char *) &val) + 7;\
-+	for(bits = 0; bits < (tbits + b_pos); bits += 8) \
-+		*d-- = *s++;\
-+	value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\
-+}
-+
-+#define SQUASHFS_MEMSET(s, d, n)	memset(s, 0, n);
-+
-+#endif
-+#endif
-diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs_i.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_i.h
---- linux-2.6.24/include/linux/squashfs_fs_i.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_i.h	2007-08-19 04:24:08.000000000 +0100
-@@ -0,0 +1,45 @@
-+#ifndef SQUASHFS_FS_I
-+#define SQUASHFS_FS_I
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007
-+ * Phillip Lougher <phillip@lougher.demon.co.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs_i.h
-+ */
-+
-+struct squashfs_inode_info {
-+	long long	start_block;
-+	unsigned int	offset;
-+	union {
-+		struct {
-+			long long	fragment_start_block;
-+			unsigned int	fragment_size;
-+			unsigned int	fragment_offset;
-+			long long	block_list_start;
-+		} s1;
-+		struct {
-+			long long	directory_index_start;
-+			unsigned int	directory_index_offset;
-+			unsigned int	directory_index_count;
-+			unsigned int	parent_inode;
-+		} s2;
-+	} u;
-+	struct inode	vfs_inode;
-+};
-+#endif
-diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs_sb.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_sb.h
---- linux-2.6.24/include/linux/squashfs_fs_sb.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_sb.h	2007-08-19 04:24:26.000000000 +0100
-@@ -0,0 +1,76 @@
-+#ifndef SQUASHFS_FS_SB
-+#define SQUASHFS_FS_SB
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007
-+ * Phillip Lougher <phillip@lougher.demon.co.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs_sb.h
-+ */
-+
-+#include <linux/squashfs_fs.h>
-+
-+struct squashfs_cache {
-+	long long	block;
-+	int		length;
-+	long long	next_index;
-+	char		*data;
-+};
-+
-+struct squashfs_fragment_cache {
-+	long long	block;
-+	int		length;
-+	unsigned int	locked;
-+	char		*data;
-+};
-+
-+struct squashfs_sb_info {
-+	struct squashfs_super_block	sblk;
-+	int			devblksize;
-+	int			devblksize_log2;
-+	int			swap;
-+	struct squashfs_cache	*block_cache;
-+	struct squashfs_fragment_cache	*fragment;
-+	int			next_cache;
-+	int			next_fragment;
-+	int			next_meta_index;
-+	unsigned int		*uid;
-+	unsigned int		*guid;
-+	long long		*fragment_index;
-+	unsigned int		*fragment_index_2;
-+	char			*read_page;
-+	struct mutex		read_data_mutex;
-+	struct mutex		read_page_mutex;
-+	struct mutex		block_cache_mutex;
-+	struct mutex		fragment_mutex;
-+	struct mutex		meta_index_mutex;
-+	wait_queue_head_t	waitq;
-+	wait_queue_head_t	fragment_wait_queue;
-+	struct meta_index	*meta_index;
-+	z_stream		stream;
-+	long long		*inode_lookup_table;
-+	int			unused_cache_blks;
-+	int			unused_frag_blks;
-+	int			(*read_inode)(struct inode *i,  squashfs_inode_t \
-+				inode);
-+	long long		(*read_blocklist)(struct inode *inode, int \
-+				index, int readahead_blks, char *block_list, \
-+				unsigned short **block_p, unsigned int *bsize);
-+	int			(*read_fragment_index_table)(struct super_block *s);
-+};
-+#endif
-diff -x .gitignore -Nurp linux-2.6.24/init/do_mounts_rd.c linux-2.6.24-squashfs3.3/init/do_mounts_rd.c
---- linux-2.6.24/init/do_mounts_rd.c	2007-10-25 17:41:49.000000000 +0100
-+++ linux-2.6.24-squashfs3.3/init/do_mounts_rd.c	2007-11-01 05:06:25.000000000 +0000
-@@ -5,6 +5,7 @@
- #include <linux/ext2_fs.h>
- #include <linux/romfs_fs.h>
- #include <linux/cramfs_fs.h>
-+#include <linux/squashfs_fs.h>
- #include <linux/initrd.h>
- #include <linux/string.h>
- 
-@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in
-  * numbers could not be found.
-  *
-  * We currently check for the following magic numbers:
-+ *      squashfs
-  * 	minix
-  * 	ext2
-  *	romfs
-@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start
- 	struct ext2_super_block *ext2sb;
- 	struct romfs_super_block *romfsb;
- 	struct cramfs_super *cramfsb;
-+	struct squashfs_super_block *squashfsb;
- 	int nblocks = -1;
- 	unsigned char *buf;
- 
-@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start
- 	ext2sb = (struct ext2_super_block *) buf;
- 	romfsb = (struct romfs_super_block *) buf;
- 	cramfsb = (struct cramfs_super *) buf;
-+	squashfsb = (struct squashfs_super_block *) buf;
- 	memset(buf, 0xe5, size);
- 
- 	/*
-@@ -101,6 +105,18 @@ identify_ramdisk_image(int fd, int start
- 		goto done;
- 	}
- 
-+	/* squashfs is at block zero too */
-+	if (squashfsb->s_magic == SQUASHFS_MAGIC) {
-+		printk(KERN_NOTICE
-+		       "RAMDISK: squashfs filesystem found at block %d\n",
-+		       start_block);
-+		if (squashfsb->s_major < 3)
-+			nblocks = (squashfsb->bytes_used_2+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
-+		else
-+			nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
-+		goto done;
-+	}
-+
- 	/*
- 	 * Read block 1 to test for minix and ext2 superblock
- 	 */
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-Allow-runtime-registration-of-regions-of-memory-that.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-Allow-runtime-registration-of-regions-of-memory-that.patch
deleted file mode 100644
index ba79b4a470..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-Allow-runtime-registration-of-regions-of-memory-that.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From d48a09b301d9a460d5ce027433e8cb8872e7b5c3 Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Fri, 4 Jan 2008 18:26:38 +0000
-Subject: [PATCH 01/64] Allow runtime registration of regions of memory that require dma bouncing.
-
----
- arch/arm/common/Kconfig           |    4 ++
- arch/arm/common/dmabounce.c       |   82 ++++++++++++++++++++++++++++++++++++-
- arch/arm/common/sa1111.c          |    2 +-
- arch/arm/mach-ixp4xx/Kconfig      |    1 +
- arch/arm/mach-ixp4xx/common-pci.c |    2 +-
- 5 files changed, 87 insertions(+), 4 deletions(-)
-
-diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
-index 3e07346..5f357fb 100644
---- a/arch/arm/common/Kconfig
-+++ b/arch/arm/common/Kconfig
-@@ -13,10 +13,14 @@ config ICST307
- config SA1111
- 	bool
- 	select DMABOUNCE
-+	select PLATFORM_DMABOUNCE
- 
- config DMABOUNCE
- 	bool
- 
-+config PLATFORM_DMABOUNCE
-+	bool
-+
- config TIMER_ACORN
- 	bool
- 
-diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
-index 52fc6a8..ed80abe 100644
---- a/arch/arm/common/dmabounce.c
-+++ b/arch/arm/common/dmabounce.c
-@@ -16,6 +16,7 @@
-  *
-  *  Copyright (C) 2002 Hewlett Packard Company.
-  *  Copyright (C) 2004 MontaVista Software, Inc.
-+ *  Copyright (C) 2007 Dmitry Baryshkov <dbaryshkov@gmail.com>
-  *
-  *  This program is free software; you can redistribute it and/or
-  *  modify it under the terms of the GNU General Public License
-@@ -24,6 +25,7 @@
- 
- #include <linux/module.h>
- #include <linux/init.h>
-+#include <linux/rwsem.h>
- #include <linux/slab.h>
- #include <linux/device.h>
- #include <linux/dma-mapping.h>
-@@ -80,6 +82,80 @@ struct dmabounce_device_info {
- 	rwlock_t lock;
- };
- 
-+struct dmabounce_check_entry {
-+	struct list_head	list;
-+	dmabounce_check		checker;
-+	void			*data;
-+};
-+
-+static struct list_head checkers = LIST_HEAD_INIT(checkers);
-+static rwlock_t checkers_lock = RW_LOCK_UNLOCKED;
-+
-+int
-+dmabounce_register_checker(dmabounce_check function, void *data)
-+{
-+	unsigned long flags;
-+	struct dmabounce_check_entry *entry =
-+		kzalloc(sizeof(struct dmabounce_check_entry), GFP_ATOMIC);
-+
-+	if (!entry)
-+		return ENOMEM;
-+
-+	INIT_LIST_HEAD(&entry->list);
-+	entry->checker = function;
-+	entry->data = data;
-+
-+	write_lock_irqsave(&checkers_lock, flags);
-+	list_add(&entry->list, &checkers);
-+	write_unlock_irqrestore(&checkers_lock, flags);
-+
-+	return 0;
-+}
-+
-+void
-+dmabounce_remove_checker(dmabounce_check function, void *data)
-+{
-+	unsigned long flags;
-+	struct list_head *pos;
-+
-+	write_lock_irqsave(&checkers_lock, flags);
-+	__list_for_each(pos, &checkers) {
-+		struct dmabounce_check_entry *entry = container_of(pos,
-+				struct dmabounce_check_entry, list);
-+		if (entry->checker == function && entry->data == data) {
-+			list_del(pos);
-+			write_unlock_irqrestore(&checkers_lock, flags);
-+			kfree(entry);
-+			return;
-+		}
-+	}
-+
-+	write_unlock_irqrestore(&checkers_lock, flags);
-+	printk(KERN_WARNING "dmabounce checker not found: %p\n", function);
-+}
-+
-+static int dma_needs_bounce(struct device *dev, dma_addr_t dma, size_t size)
-+{
-+	unsigned long flags;
-+	struct list_head *pos;
-+
-+	read_lock_irqsave(&checkers_lock, flags);
-+	__list_for_each(pos, &checkers) {
-+		struct dmabounce_check_entry *entry = container_of(pos,
-+				struct dmabounce_check_entry, list);
-+		if (entry->checker(dev, dma, size, entry->data)) {
-+			read_unlock_irqrestore(&checkers_lock, flags);
-+			return 1;
-+		}
-+	}
-+
-+	read_unlock_irqrestore(&checkers_lock, flags);
-+#ifdef CONFIG_PLATFORM_DMABOUNCE
-+	return platform_dma_needs_bounce(dev, dma, size);
-+#else
-+	return 0;
-+#endif
-+}
- #ifdef STATS
- static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr,
- 			      char *buf)
-@@ -239,7 +315,7 @@ map_single(struct device *dev, void *ptr, size_t size,
- 		struct safe_buffer *buf;
- 
- 		buf = alloc_safe_buffer(device_info, ptr, size, dir);
--		if (buf == 0) {
-+		if (buf == NULL) {
- 			dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
- 			       __func__, ptr);
- 			return 0;
-@@ -643,7 +719,6 @@ dmabounce_unregister_dev(struct device *dev)
- 		dev->bus_id, dev->bus->name);
- }
- 
--
- EXPORT_SYMBOL(dma_map_single);
- EXPORT_SYMBOL(dma_unmap_single);
- EXPORT_SYMBOL(dma_map_sg);
-@@ -653,6 +728,9 @@ EXPORT_SYMBOL(dma_sync_single_for_device);
- EXPORT_SYMBOL(dma_sync_sg);
- EXPORT_SYMBOL(dmabounce_register_dev);
- EXPORT_SYMBOL(dmabounce_unregister_dev);
-+EXPORT_SYMBOL(dmabounce_register_checker);
-+EXPORT_SYMBOL(dmabounce_remove_checker);
-+
- 
- MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>");
- MODULE_DESCRIPTION("Special dma_{map/unmap/dma_sync}_* routines for systems with limited DMA windows");
-diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
-index eb06d0b..3b8fbdd 100644
---- a/arch/arm/common/sa1111.c
-+++ b/arch/arm/common/sa1111.c
-@@ -778,7 +778,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
-  * This should only get called for sa1111_device types due to the
-  * way we configure our device dma_masks.
-  */
--int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-+int platform_dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
- {
- 	/*
- 	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
-diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
-index 61b2dfc..5870371 100644
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -161,6 +161,7 @@ comment "IXP4xx Options"
- config DMABOUNCE
- 	bool
- 	default y
-+	select PLATFORM_DMABOUNCE
- 	depends on PCI
- 
- config IXP4XX_INDIRECT_PCI
-diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
-index bf04121..ac46492 100644
---- a/arch/arm/mach-ixp4xx/common-pci.c
-+++ b/arch/arm/mach-ixp4xx/common-pci.c
-@@ -336,7 +336,7 @@ static int ixp4xx_pci_platform_notify_remove(struct device *dev)
- 	return 0;
- }
- 
--int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-+int platform_dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
- {
- 	return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
- }
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch
deleted file mode 100644
index 09f0cb946c..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 688df15bb534519e0698cc8e4a4d9234afd32105 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Fri, 7 Nov 2008 15:50:39 +0300
-Subject: [PATCH] pxa2xx-ac97: switch AC unit to correct state before probing
-
-If AC97 unit is in partially enabled state, early request_irq can trigger
-IRQ storm or even full hang up. Workaround this by forcibly switching ACLINK off
-at the start of the probe.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- sound/soc/pxa/pxa2xx-ac97.c |   30 +++++++++++++++++-------------
- 1 files changed, 17 insertions(+), 13 deletions(-)
-
-Index: linux-2.6.24/sound/soc/pxa/pxa2xx-ac97.c
-===================================================================
---- linux-2.6.24.orig/sound/soc/pxa/pxa2xx-ac97.c	2008-01-25 01:58:37.000000000 +0300
-+++ linux-2.6.24/sound/soc/pxa/pxa2xx-ac97.c	2008-11-15 20:02:45.396976363 +0300
-@@ -284,10 +284,6 @@ static int pxa2xx_ac97_probe(struct plat
- {
-	int ret;
-
--	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
--	if (ret < 0)
--		goto err;
--
-	pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
-	pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
-	pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
-@@ -296,15 +292,23 @@ static int pxa2xx_ac97_probe(struct plat
-	/* Use GPIO 113 as AC97 Reset on Bulverde */
-	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
- #endif
-+	GCR = GCR_ACLINK_OFF;
-+
-	pxa_set_cken(CKEN_AC97, 1);
-+
-+	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
-+	if (ret < 0)
-+		goto err;
-+
-+
-	return 0;
-
-- err:
--	if (CKEN & (1 << CKEN_AC97)) {
-+err:
-+/*	if (CKEN & (1 << CKEN_AC97)) {*/
-		GCR |= GCR_ACLINK_OFF;
-		free_irq(IRQ_AC97, NULL);
-		pxa_set_cken(CKEN_AC97, 0);
--	}
-+/*	}*/
-	return ret;
- }
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0002-Modify-dma_alloc_coherent-on-ARM-so-that-it-supports.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0002-Modify-dma_alloc_coherent-on-ARM-so-that-it-supports.patch
deleted file mode 100644
index a562ef921b..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0002-Modify-dma_alloc_coherent-on-ARM-so-that-it-supports.patch
+++ /dev/null
@@ -1,260 +0,0 @@
-From 8e95f90487d2fb46fd862744ddb34f47c30b0c5a Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Fri, 4 Jan 2008 18:27:50 +0000
-Subject: [PATCH 02/64] Modify dma_alloc_coherent on ARM so that it supports device local DMA.
-
----
- arch/arm/mm/consistent.c      |  125 +++++++++++++++++++++++++++++++++++++++++
- include/asm-arm/dma-mapping.h |   37 +++++++------
- 2 files changed, 145 insertions(+), 17 deletions(-)
-
-diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
-index 333a82a..3da0f94 100644
---- a/arch/arm/mm/consistent.c
-+++ b/arch/arm/mm/consistent.c
-@@ -3,6 +3,8 @@
-  *
-  *  Copyright (C) 2000-2004 Russell King
-  *
-+ *  Device local coherent memory support added by Ian Molton (spyro@f2s.com)
-+ *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-@@ -20,6 +22,7 @@
- 
- #include <asm/memory.h>
- #include <asm/cacheflush.h>
-+#include <asm/io.h>
- #include <asm/tlbflush.h>
- #include <asm/sizes.h>
- 
-@@ -35,6 +38,13 @@
- #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
- #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
- 
-+struct dma_coherent_mem {
-+	void		*virt_base;
-+	u32		device_base;
-+	int		size;
-+	int		flags;
-+	unsigned long	*bitmap;
-+};
- 
- /*
-  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
-@@ -153,6 +163,13 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
- 	unsigned long order;
- 	u64 mask = ISA_DMA_THRESHOLD, limit;
- 
-+	/* Following is a work-around (a.k.a. hack) to prevent pages
-+	 * with __GFP_COMP being passed to split_page() which cannot
-+	 * handle them.  The real problem is that this flag probably
-+	 * should be 0 on ARM as it is not supported on this
-+	 * platform--see CONFIG_HUGETLB_PAGE. */
-+	gfp &= ~(__GFP_COMP);
-+
- 	if (!consistent_pte[0]) {
- 		printk(KERN_ERR "%s: not initialised\n", __func__);
- 		dump_stack();
-@@ -160,6 +177,26 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
- 	}
- 
- 	if (dev) {
-+
-+		if (dev->dma_mem) {
-+			unsigned long flags;
-+			int pgnum;
-+			void *ret;
-+
-+			spin_lock_irqsave(&consistent_lock, flags);
-+			pgnum = bitmap_find_free_region(dev->dma_mem->bitmap,
-+						       dev->dma_mem->size,
-+						       get_order(size));
-+			spin_unlock_irqrestore(&consistent_lock, flags);
-+
-+			if (pgnum >= 0) {
-+				*handle = dev->dma_mem->device_base + (pgnum << PAGE_SHIFT);
-+				ret = dev->dma_mem->virt_base + (pgnum << PAGE_SHIFT);
-+				memset(ret, 0, size);
-+				return ret;
-+			}
-+		}
-+
- 		mask = dev->coherent_dma_mask;
- 
- 		/*
-@@ -177,6 +214,9 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
- 				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
- 			goto no_page;
- 		}
-+
-+		if (dev->dma_mem && dev->dma_mem->flags & DMA_MEMORY_EXCLUSIVE)
-+			return NULL;
- 	}
- 
- 	/*
-@@ -359,6 +399,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
- 	pte_t *ptep;
- 	int idx;
- 	u32 off;
-+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-+	unsigned long order;
- 
- 	WARN_ON(irqs_disabled());
- 
-@@ -368,6 +410,15 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
- 	}
- 
- 	size = PAGE_ALIGN(size);
-+	order = get_order(size);
-+
-+	/* What if mem is valid and the range is not? */
-+	if (mem && cpu_addr >= mem->virt_base && cpu_addr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-+		int page = (cpu_addr - mem->virt_base) >> PAGE_SHIFT;
-+
-+		bitmap_release_region(mem->bitmap, page, order);
-+		return;
-+	}
- 
- 	spin_lock_irqsave(&consistent_lock, flags);
- 	c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-@@ -437,6 +488,80 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
- }
- EXPORT_SYMBOL(dma_free_coherent);
- 
-+int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-+				dma_addr_t device_addr, size_t size, int flags)
-+{
-+	void __iomem *mem_base;
-+	int pages = size >> PAGE_SHIFT;
-+	int bitmap_size = (pages + 31)/32;
-+
-+	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-+		goto out;
-+	if (!size)
-+		goto out;
-+	if (dev->dma_mem)
-+		goto out;
-+
-+	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-+	mem_base = ioremap_nocache(bus_addr, size);
-+	if (!mem_base)
-+		goto out;
-+
-+	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-+	if (!dev->dma_mem)
-+		goto out;
-+	memset(dev->dma_mem, 0, sizeof(struct dma_coherent_mem));
-+	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-+	if (!dev->dma_mem->bitmap)
-+		goto free1_out;
-+
-+	dev->dma_mem->virt_base = mem_base;
-+	dev->dma_mem->device_base = device_addr;
-+	dev->dma_mem->size = pages;
-+	dev->dma_mem->flags = flags;
-+
-+	if (flags & DMA_MEMORY_MAP)
-+		return DMA_MEMORY_MAP;
-+
-+	return DMA_MEMORY_IO;
-+
-+ free1_out:
-+	kfree(dev->dma_mem->bitmap);
-+ out:
-+	return 0;
-+}
-+EXPORT_SYMBOL(dma_declare_coherent_memory);
-+
-+void dma_release_declared_memory(struct device *dev)
-+{
-+	struct dma_coherent_mem *mem = dev->dma_mem;
-+
-+	if (!mem)
-+		return;
-+	dev->dma_mem = NULL;
-+	kfree(mem->bitmap);
-+	kfree(mem);
-+}
-+EXPORT_SYMBOL(dma_release_declared_memory);
-+
-+void *dma_mark_declared_memory_occupied(struct device *dev,
-+					dma_addr_t device_addr, size_t size)
-+{
-+	struct dma_coherent_mem *mem = dev->dma_mem;
-+	int pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
-+	int pos, err;
-+
-+	if (!mem)
-+		return ERR_PTR(-EINVAL);
-+
-+	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-+	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-+	if (err != 0)
-+		return ERR_PTR(err);
-+	return mem->virt_base + (pos << PAGE_SHIFT);
-+}
-+EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-+
- /*
-  * Initialise the consistent memory allocation.
-  */
-diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
-index e99406a..f18ba05 100644
---- a/include/asm-arm/dma-mapping.h
-+++ b/include/asm-arm/dma-mapping.h
-@@ -7,6 +7,19 @@
- 
- #include <linux/scatterlist.h>
- 
-+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-+extern int
-+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-+                            dma_addr_t device_addr, size_t size, int flags);
-+
-+extern void
-+dma_release_declared_memory(struct device *dev);
-+
-+extern void *
-+dma_mark_declared_memory_occupied(struct device *dev,
-+                                  dma_addr_t device_addr, size_t size);
-+
-+
- /*
-  * DMA-consistent mapping functions.  These allocate/free a region of
-  * uncached, unwrite-buffered mapped memory space for use with DMA
-@@ -433,23 +446,13 @@ extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long)
-  */
- extern void dmabounce_unregister_dev(struct device *);
- 
--/**
-- * dma_needs_bounce
-- *
-- * @dev: valid struct device pointer
-- * @dma_handle: dma_handle of unbounced buffer
-- * @size: size of region being mapped
-- *
-- * Platforms that utilize the dmabounce mechanism must implement
-- * this function.
-- *
-- * The dmabounce routines call this function whenever a dma-mapping
-- * is requested to determine whether a given buffer needs to be bounced
-- * or not. The function must return 0 if the buffer is OK for
-- * DMA access and 1 if the buffer needs to be bounced.
-- *
-- */
--extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-+typedef int (*dmabounce_check)(struct device *dev, dma_addr_t dma, size_t size, void *data);
-+extern int dmabounce_register_checker(dmabounce_check, void *data);
-+extern void dmabounce_remove_checker(dmabounce_check, void *data);
-+#ifdef CONFIG_PLATFORM_DMABOUNCE
-+extern int platform_dma_needs_bounce(struct device *dev, dma_addr_t dma, size_t size, void *data);
-+#endif
-+
- #endif /* CONFIG_DMABOUNCE */
- 
- #endif /* __KERNEL__ */
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0003-Core-MFD-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0003-Core-MFD-support.patch
deleted file mode 100644
index d84a4f7835..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0003-Core-MFD-support.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From a07910753f9965842b6647f0561db125b538f5ed Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Fri, 4 Jan 2008 18:32:44 +0000
-Subject: [PATCH 03/64] Core MFD support
-
-This patch provides a common subdevice registration system for MFD type
-chips, using platfrom device.
-
-It also provides a new resource type for IRQs such that a subdevices IRQ may
-be computed based on the MFD cores IRQ handler, since many MFDs provide an IRQ
-multiplex.
----
- drivers/mfd/Kconfig      |    4 ++
- drivers/mfd/Makefile     |    2 +
- drivers/mfd/mfd-core.c   |  116 ++++++++++++++++++++++++++++++++++++++++++++++
- include/linux/ioport.h   |    1 +
- include/linux/mfd-core.h |   51 ++++++++++++++++++++
- 5 files changed, 174 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mfd/mfd-core.c
- create mode 100644 include/linux/mfd-core.h
-
-diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
-index 2571619..1205c89 100644
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -5,6 +5,10 @@
- menu "Multifunction device drivers"
- 	depends on HAS_IOMEM
- 
-+config MFD_CORE
-+	tristate
-+	default n
-+
- config MFD_SM501
- 	tristate "Support for Silicon Motion SM501"
- 	 ---help---
-diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
-index 5143209..6c20064 100644
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -4,6 +4,8 @@
- 
- obj-$(CONFIG_MFD_SM501)		+= sm501.o
- 
-+obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
-+
- obj-$(CONFIG_MCP)		+= mcp-core.o
- obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
- obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
-diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
-new file mode 100644
-index 0000000..88874e1
---- /dev/null
-+++ b/drivers/mfd/mfd-core.c
-@@ -0,0 +1,116 @@
-+/*
-+ * drivers/mfd/mfd-core.c
-+ *
-+ * core MFD support
-+ * Copyright (c) 2006 Ian Molton
-+ * Copyright (c) 2007 Dmitry Baryshkov
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/mfd-core.h>
-+
-+#define SIGNED_SHIFT(val, shift) ((shift) >= 0 ?	\
-+			((val) << (shift)) :		\
-+			((val) >> -(shift)))
-+
-+int mfd_add_devices(
-+		struct platform_device *parent,
-+		const struct mfd_cell *cells, int n_devs,
-+		struct resource *mem,
-+		int relative_addr_shift,
-+		int irq_base)
-+{
-+	int i;
-+
-+	for (i = 0; i < n_devs; i++) {
-+		struct resource *res = NULL;
-+		const struct mfd_cell *cell = cells + i;
-+		struct platform_device *pdev;
-+		int ret = -ENOMEM;
-+		int r;
-+
-+		pdev = platform_device_alloc(cell->name, -1);
-+		if (!pdev)
-+			goto fail_alloc;
-+
-+		pdev->dev.uevent_suppress = 0;
-+		pdev->dev.parent = &parent->dev;
-+
-+		ret = platform_device_add_data(pdev, &cell, sizeof(struct mfd_cell *));
-+		if (ret)
-+			goto fail_device;
-+
-+		res = kzalloc(cell->num_resources * sizeof(struct resource),
-+							GFP_KERNEL);
-+		if (!res)
-+			goto fail_device;
-+
-+		for (r = 0; r < cell->num_resources; r++) {
-+			res[r].name = cell->resources[r].name;
-+
-+			/* Find out base to use */
-+			if (cell->resources[r].flags & IORESOURCE_MEM) {
-+				res[r].parent = mem;
-+				res[r].start = mem->start +
-+					SIGNED_SHIFT(cell->resources[r].start,
-+							relative_addr_shift);
-+				res[r].end   = mem->start +
-+					SIGNED_SHIFT(cell->resources[r].end,
-+							relative_addr_shift);
-+			} else if ((cell->resources[r].flags & IORESOURCE_IRQ) &&
-+				(cell->resources[r].flags & IORESOURCE_IRQ_MFD_SUBDEVICE)) {
-+				res[r].start = irq_base +
-+					cell->resources[r].start;
-+				res[r].end   = irq_base +
-+					cell->resources[r].end;
-+			} else {
-+				res[r].start = cell->resources[r].start;
-+				res[r].end   = cell->resources[r].end;
-+			}
-+
-+			res[r].flags = cell->resources[r].flags;
-+		}
-+
-+		ret = platform_device_add_resources(pdev,
-+				res,
-+				cell->num_resources);
-+		kfree(res);
-+
-+		if (ret)
-+			goto fail_device;
-+
-+		ret = platform_device_add(pdev);
-+
-+		if (ret) {
-+			platform_device_del(pdev);
-+fail_device:
-+			platform_device_put(pdev);
-+fail_alloc:
-+			mfd_remove_devices(parent);
-+			return ret;
-+		}
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(mfd_add_devices);
-+
-+static int mfd_remove_devices_fn(struct device *dev, void *unused)
-+{
-+	platform_device_unregister(container_of(dev, struct platform_device, dev));
-+	return 0;
-+}
-+
-+void mfd_remove_devices(struct platform_device *parent)
-+{
-+	device_for_each_child(&parent->dev, NULL, mfd_remove_devices_fn);
-+}
-+EXPORT_SYMBOL(mfd_remove_devices);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov");
-diff --git a/include/linux/ioport.h b/include/linux/ioport.h
-index 6187a85..0348c71 100644
---- a/include/linux/ioport.h
-+++ b/include/linux/ioport.h
-@@ -56,6 +56,7 @@ struct resource_list {
- #define IORESOURCE_IRQ_HIGHLEVEL	(1<<2)
- #define IORESOURCE_IRQ_LOWLEVEL		(1<<3)
- #define IORESOURCE_IRQ_SHAREABLE	(1<<4)
-+#define IORESOURCE_IRQ_MFD_SUBDEVICE	(1<<5)
- 
- /* ISA PnP DMA specific bits (IORESOURCE_BITS) */
- #define IORESOURCE_DMA_TYPE_MASK	(3<<0)
-diff --git a/include/linux/mfd-core.h b/include/linux/mfd-core.h
-new file mode 100644
-index 0000000..0e9de78
---- /dev/null
-+++ b/include/linux/mfd-core.h
-@@ -0,0 +1,51 @@
-+#ifndef MFD_CORE_H
-+#define MFD_CORE_H
-+/*
-+ * drivers/mfd/mfd-core.h
-+ *
-+ * core MFD support
-+ * Copyright (c) 2006 Ian Molton
-+ * Copyright (c) 2007 Dmitry Baryshkov
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/platform_device.h>
-+
-+struct mfd_cell {
-+	const char		*name;
-+
-+	int			(*enable)(struct platform_device *dev);
-+	int			(*disable)(struct platform_device *dev);
-+	int			(*suspend)(struct platform_device *dev);
-+	int			(*resume)(struct platform_device *dev);
-+
-+	void			*driver_data; /* data passed to drivers */
-+
-+	/*
-+	 * This resources can be specified relatievly to the parent device.
-+	 * For accessing device you should use resources from device
-+	 */
-+	int			num_resources;
-+	const struct resource	*resources;
-+};
-+
-+static inline __maybe_unused struct mfd_cell *
-+mfd_get_cell(struct platform_device *pdev)
-+{
-+	return *((struct mfd_cell **)(pdev->dev.platform_data));
-+}
-+
-+extern int mfd_add_devices(
-+		struct platform_device *parent,
-+		const struct mfd_cell *cells, int n_devs,
-+		struct resource *mem,
-+		int relative_addr_shift,
-+		int irq_base);
-+
-+extern void mfd_remove_devices(struct platform_device *parent);
-+
-+#endif
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0004-Add-support-for-tc6393xb-MFD-core.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0004-Add-support-for-tc6393xb-MFD-core.patch
deleted file mode 100644
index a78c0f37f3..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0004-Add-support-for-tc6393xb-MFD-core.patch
+++ /dev/null
@@ -1,907 +0,0 @@
-From 3f56cac281fb407b7d8e574d18ee7d72aa7e7c28 Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Sat, 29 Dec 2007 15:02:30 +0000
-Subject: [PATCH 04/64] Add support for tc6393xb MFD core
-
----
- drivers/mfd/Kconfig          |    6 +
- drivers/mfd/Makefile         |    2 +
- drivers/mfd/tc6393xb.c       |  740 ++++++++++++++++++++++++++++++++++++++++++
- include/linux/mfd/tc6393xb.h |  108 ++++++
- 4 files changed, 856 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mfd/tc6393xb.c
- create mode 100644 include/linux/mfd/tc6393xb.h
-
-diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
-index 1205c89..9903d0a 100644
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -9,6 +9,12 @@ config MFD_CORE
- 	tristate
- 	default n
- 
-+config MFD_TC6393XB
-+	bool "Support Toshiba TC6393XB"
-+	select MFD_CORE
-+	help
-+	  Support for Toshiba Mobile IO Controller TC6393XB
-+
- config MFD_SM501
- 	tristate "Support for Silicon Motion SM501"
- 	 ---help---
-diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
-index 6c20064..ffd342e 100644
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -6,6 +6,8 @@ obj-$(CONFIG_MFD_SM501)		+= sm501.o
- 
- obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
- 
-+obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
-+
- obj-$(CONFIG_MCP)		+= mcp-core.o
- obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
- obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
-diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
-new file mode 100644
-index 0000000..9439f39
---- /dev/null
-+++ b/drivers/mfd/tc6393xb.c
-@@ -0,0 +1,740 @@
-+/*
-+ * Toshiba TC6393XB SoC support
-+ *
-+ * Copyright(c) 2005-2006 Chris Humbert
-+ * Copyright(c) 2005 Dirk Opfer
-+ * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
-+ * Copyright(c) 2007 Dmitry Baryshkov
-+ *
-+ * Based on code written by Sharp/Lineo for 2.4 kernels
-+ * Based on locomo.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+#include <linux/mfd/tc6393xb.h>
-+
-+struct tc6393xb_scr {
-+	u8 x00[8];
-+	u8	revid;		/* 0x08 Revision ID			*/
-+	u8 x01[0x47];
-+	u8	isr;		/* 0x50 Interrupt Status		*/
-+	u8 x02;
-+	u8	imr;		/* 0x52 Interrupt Mask			*/
-+	u8 x03;
-+	u8	irr;		/* 0x54 Interrupt Routing		*/
-+	u8 x04[0x0b];
-+	u16	gper;		/* 0x60 GP Enable			*/
-+	u8 x05[2];
-+	u16	gpi_sr[2];	/* 0x64 GPI Status			*/
-+	u16	gpi_imr[2];	/* 0x68 GPI INT Mask			*/
-+	u16	gpi_eder[2];	/* 0x6c GPI Edge Detect Enable		*/
-+	u16	gpi_lir[4];	/* 0x70 GPI Level Invert		*/
-+	u16	gpo_dsr[2];	/* 0x78 GPO Data Set			*/
-+	u16	gpo_doecr[2];	/* 0x7c GPO Data OE Control		*/
-+	u16	gp_iarcr[2];	/* 0x80 GP Internal Active Reg Control	*/
-+	u16	gp_iarlcr[2];	/* 0x84 GP Internal Active Reg Level Con*/
-+	u8	gpi_bcr[4];	/* 0x88 GPI Buffer Control		*/
-+	u16	gpa_iarcr;	/* 0x8c GPa Internal Active Reg Control	*/
-+	u8 x06[2];
-+	u16	gpa_iarlcr;	/* 0x90 GPa Internal Active Reg Level Co*/
-+	u8 x07[2];
-+	u16	gpa_bcr;	/* 0x94 GPa Buffer Control		*/
-+	u8 x08[2];
-+	u16	ccr;		/* 0x98 Clock Control			*/
-+	u16	pll2cr;		/* 0x9a PLL2 Control			*/
-+	u16	pll1cr[2];	/* 0x9c PLL1 Control			*/
-+	u8	diarcr;		/* 0xa0 Device Internal Active Reg Contr*/
-+	u8	dbocr;		/* 0xa1 Device Buffer Off Control	*/
-+	u8 x09[0x3e];
-+	u8	fer;		/* 0xe0 Function Enable			*/
-+	u8 x10[3];
-+	u16	mcr;		/* 0xe4 Mode Control			*/
-+	u8 x11[0x14];
-+	u8	config;		/* 0xfc Configuration Control		*/
-+	u8 x12[2];
-+	u8	debug;		/* 0xff Debug				*/
-+} __attribute__ ((packed));
-+
-+/*--------------------------------------------------------------------------*/
-+
-+struct tc6393xb {
-+	struct tc6393xb_scr __iomem	*scr;
-+
-+	spinlock_t			lock; /* protects RMW cycles */
-+
-+	struct {
-+		union tc6393xb_scr_fer	fer;
-+		union tc6393xb_scr_ccr	ccr;
-+		u8			gpi_bcr[4];
-+	} suspend_state;
-+
-+	struct resource			rscr;
-+	struct resource			*iomem;
-+	int				irq;
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static int tc6393xb_mmc_enable(struct platform_device *mmc) {
-+	struct platform_device		*dev	= to_platform_device(mmc->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr = tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.ck32ken = 1;
-+	iowrite16(ccr.raw, &scr->ccr);
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int tc6393xb_mmc_disable(struct platform_device *mmc) {
-+	struct platform_device		*dev	= to_platform_device(mmc->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.ck32ken = 0;
-+	iowrite16(ccr.raw, &scr->ccr);
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static int tc6393xb_nand_disable(struct platform_device *nand)
-+{
-+	return 0;
-+}
-+
-+static int tc6393xb_nand_enable(struct platform_device *nand)
-+{
-+	struct platform_device		*dev	= to_platform_device(nand->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	/* SMD buffer on */
-+	dev_dbg(&dev->dev, "SMD buffer on\n");
-+	iowrite8(0xff, scr->gpi_bcr + 1);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+int tc6393xb_lcd_set_power(struct platform_device *fb, bool on)
-+{
-+	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_fer		fer;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	fer.raw	= ioread8(&scr->fer);
-+	fer.bits.slcden = on ? 1 : 0;
-+	iowrite8(fer.raw, &scr->fer);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(tc6393xb_lcd_set_power);
-+
-+int tc6393xb_lcd_mode(struct platform_device *fb_dev,
-+					struct fb_videomode *mode) {
-+	struct tc6393xb			*tc6393xb =
-+		platform_get_drvdata(to_platform_device(fb_dev->dev.parent));
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+
-+	iowrite16(mode->pixclock,		scr->pll1cr + 0);
-+	iowrite16(mode->pixclock >> 16,		scr->pll1cr + 1);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(tc6393xb_lcd_mode);
-+
-+static int tc6393xb_ohci_disable(struct platform_device *ohci)
-+{
-+	struct platform_device		*dev	= to_platform_device(ohci->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	union tc6393xb_scr_fer		fer;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	fer.raw = ioread8(&scr->fer);
-+	fer.bits.usben = 0;
-+	iowrite8(fer.raw, &scr->fer);
-+
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.usbcken = 0;
-+	iowrite16(ccr.raw, &scr->ccr);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int tc6393xb_ohci_enable(struct platform_device *ohci)
-+{
-+	struct platform_device		*dev	= to_platform_device(ohci->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	union tc6393xb_scr_fer		fer;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.usbcken = 1;
-+	iowrite16(ccr.raw, &scr->ccr);
-+
-+	fer.raw = ioread8(&scr->fer);
-+	fer.bits.usben = 1;
-+	iowrite8(fer.raw, &scr->fer);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int tc6393xb_fb_disable(struct platform_device *fb)
-+{
-+	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	union tc6393xb_scr_fer		fer;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	/*
-+	 * FIXME: is this correct or it should be moved to other _disable?
-+	 */
-+	fer.raw	= ioread8(&scr->fer);
-+	fer.bits.slcden = 0;
-+/*	fer.bits.lcdcven = 0; */
-+	iowrite8(fer.raw, &scr->fer);
-+
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.mclksel = disable;
-+	iowrite16(ccr.raw, &scr->ccr);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int tc6393xb_fb_enable(struct platform_device *fb)
-+{
-+	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.mclksel = m48MHz;
-+	iowrite16(ccr.raw, &scr->ccr);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int tc6393xb_fb_suspend(struct platform_device *fb)
-+{
-+	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.mclksel = disable;
-+	iowrite16(ccr.raw, &scr->ccr);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int tc6393xb_fb_resume(struct platform_device *fb)
-+{
-+	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.mclksel = m48MHz;
-+	iowrite16(ccr.raw, &scr->ccr);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static struct resource tc6393xb_mmc_resources[] = {
-+	{
-+		.name	= TMIO_MMC_CONTROL,
-+		.start	= 0x800,
-+		.end	= 0x9ff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_MMC_CONFIG,
-+		.start	= 0x200,
-+		.end	= 0x2ff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_MMC_IRQ,
-+		.start	= IRQ_TC6393_MMC,
-+		.end	= IRQ_TC6393_MMC,
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE,
-+	},
-+};
-+
-+const static struct resource tc6393xb_nand_resources[] = {
-+	{
-+		.name	= TMIO_NAND_CONFIG,
-+		.start	= 0x0100,
-+		.end	= 0x01ff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_NAND_CONTROL,
-+		.start	= 0x1000,
-+		.end	= 0x1007,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_NAND_IRQ,
-+		.start	= IRQ_TC6393_NAND,
-+		.end	= IRQ_TC6393_NAND,
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE,
-+	},
-+};
-+
-+const static struct resource tc6393xb_ohci_resources[] = {
-+	{
-+		.name	= TMIO_OHCI_CONFIG,
-+		.start	= 0x0300,
-+		.end	= 0x03ff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_OHCI_CONTROL,
-+		.start	= 0x3000,
-+		.end	= 0x31ff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_OHCI_SRAM,
-+		.start	= 0x010000,
-+		.end	= 0x017fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_OHCI_SRAM_ALIAS,
-+		.start	= 0x018000,
-+		.end	= 0x01ffff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_OHCI_IRQ,
-+		.start	= IRQ_TC6393_OHCI,
-+		.end	= IRQ_TC6393_OHCI,
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE,
-+	},
-+};
-+
-+const static struct resource tc6393xb_fb_resources[] = {
-+	{
-+		.name	= TMIO_FB_CONFIG,
-+		.start	= 0x0500,
-+		.end	= 0x05ff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_FB_CONTROL,
-+		.start	= 0x5000,
-+		.end	= 0x51ff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_FB_VRAM,
-+		.start	= 0x100000,
-+		.end	= 0x1fffff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= TMIO_FB_IRQ,
-+		.start	= IRQ_TC6393_FB,
-+		.end	= IRQ_TC6393_FB,
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE,
-+	},
-+};
-+
-+static struct mfd_cell tc6393xb_cells[] = {
-+	{
-+		.name = "tmio-nand",
-+		.enable = tc6393xb_nand_enable,
-+		.disable = tc6393xb_nand_disable,
-+		.num_resources = ARRAY_SIZE(tc6393xb_nand_resources),
-+		.resources = tc6393xb_nand_resources,
-+	},
-+	{
-+		.name = "tmio-ohci",
-+		.enable = tc6393xb_ohci_enable,
-+		.disable = tc6393xb_ohci_disable,
-+		.num_resources = ARRAY_SIZE(tc6393xb_ohci_resources),
-+		.resources = tc6393xb_ohci_resources,
-+	},
-+	{
-+		.name = "tmio-fb",
-+		.enable = tc6393xb_fb_enable,
-+		.disable = tc6393xb_fb_disable,
-+		.suspend = tc6393xb_fb_suspend,
-+		.resume = tc6393xb_fb_resume,
-+		.num_resources = ARRAY_SIZE(tc6393xb_fb_resources),
-+		.resources = tc6393xb_fb_resources,
-+	},
-+	{
-+		.name = "tmio-mmc",
-+		.enable = tc6393xb_mmc_enable,
-+		.disable = tc6393xb_mmc_disable,
-+		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
-+		.resources = tc6393xb_mmc_resources,
-+	},
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static void
-+tc6393xb_irq(unsigned int irq, struct irq_desc *desc)
-+{
-+	struct platform_device		*dev	= get_irq_chip_data(irq);
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	unsigned int			isr;
-+	unsigned int			i;
-+
-+	desc->chip->ack(irq);
-+
-+	while ((isr = ioread8(&scr->isr) & ~ioread8(&scr->imr)))
-+		for (i = 0; i < TC6393XB_NR_IRQS; i++) {
-+			if (isr & (1 << i))
-+				desc_handle_irq(tcpd->irq_base + i,
-+					irq_desc + tcpd->irq_base + i);
-+		}
-+}
-+
-+static void tc6393xb_irq_ack(unsigned int irq)
-+{
-+}
-+
-+static void tc6393xb_irq_mask(unsigned int irq)
-+{
-+	struct platform_device		*dev	= get_irq_chip_data(irq);
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+	iowrite8(ioread8(&scr->imr) | (1 << (irq - tcpd->irq_base)),
-+								&scr->imr);
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+}
-+
-+static void tc6393xb_irq_unmask(unsigned int irq)
-+{
-+	struct platform_device		*dev	= get_irq_chip_data(irq);
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+	iowrite8(ioread8(&scr->imr) & ~(1 << (irq - tcpd->irq_base)),
-+								&scr->imr);
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+}
-+
-+static struct irq_chip tc6393xb_chip = {
-+	.name	= "tc6393xb",
-+	.ack	= tc6393xb_irq_ack,
-+	.mask	= tc6393xb_irq_mask,
-+	.unmask	= tc6393xb_irq_unmask,
-+};
-+
-+static void tc6393xb_attach_irq(struct platform_device *dev)
-+{
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	unsigned int			irq;
-+
-+	for (
-+			irq = tcpd->irq_base;
-+			irq <= tcpd->irq_base + TC6393XB_NR_IRQS;
-+			irq++) {
-+		set_irq_chip(irq, &tc6393xb_chip);
-+		set_irq_chip_data(irq, dev);
-+		set_irq_handler(irq, handle_edge_irq);
-+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+	}
-+
-+	set_irq_type(tc6393xb->irq, IRQT_FALLING);
-+	set_irq_chip_data(tc6393xb->irq, dev);
-+	set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq);
-+}
-+
-+static void tc6393xb_detach_irq(struct platform_device *dev)
-+{
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	unsigned int			irq;
-+
-+	set_irq_chained_handler(tc6393xb->irq, NULL);
-+	set_irq_chip_data(tc6393xb->irq, NULL);
-+
-+	for (
-+			irq = tcpd->irq_base;
-+			irq <= tcpd->irq_base + TC6393XB_NR_IRQS;
-+			irq++) {
-+		set_irq_flags(irq, 0);
-+		set_irq_chip(irq, NULL);
-+		set_irq_chip_data(irq, NULL);
-+	}
-+}
-+
-+static int tc6393xb_hw_init(struct platform_device *dev, int resume)
-+{
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	int				ret;
-+	int				i;
-+
-+	if (resume)
-+		ret = tcpd->resume(dev);
-+	else
-+		ret = tcpd->enable(dev);
-+	if (ret)
-+		return ret;
-+
-+	iowrite8(resume ?
-+		tc6393xb->suspend_state.fer.raw :
-+		0,				&scr->fer);
-+	iowrite16(tcpd->scr_pll2cr,		&scr->pll2cr);
-+	iowrite16(resume?
-+		tc6393xb->suspend_state.ccr.raw :
-+		tcpd->scr_ccr.raw,		&scr->ccr);
-+	iowrite16(tcpd->scr_mcr.raw,		&scr->mcr);
-+	iowrite16(tcpd->scr_gper,		&scr->gper);
-+	iowrite8(0,				&scr->irr);
-+	iowrite8(0xbf,				&scr->imr);
-+	iowrite16(tcpd->scr_gpo_dsr,		scr->gpo_dsr + 0);
-+	iowrite16(tcpd->scr_gpo_dsr >> 16,	scr->gpo_dsr + 1);
-+	iowrite16(tcpd->scr_gpo_doecr,		scr->gpo_doecr + 0);
-+	iowrite16(tcpd->scr_gpo_doecr >> 16,	scr->gpo_doecr + 1);
-+
-+	if (resume)
-+		for (i = 0; i < 4; i++)
-+			iowrite8(tc6393xb->suspend_state.gpi_bcr[i],
-+						scr->gpi_bcr + i);
-+
-+	return 0;
-+}
-+
-+static int __devinit tc6393xb_probe(struct platform_device *dev)
-+{
-+	struct tc6393xb_platform_data *tcpd	= dev->dev.platform_data;
-+	struct tc6393xb		*tc6393xb;
-+	struct resource		*iomem;
-+	struct resource		*rscr;
-+	int			retval;
-+
-+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+	if (!iomem)
-+		return -EINVAL;
-+
-+	tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL);
-+	if (!tc6393xb) {
-+		retval = -ENOMEM;
-+		goto err_kzalloc;
-+	}
-+
-+	spin_lock_init(&tc6393xb->lock);
-+
-+	platform_set_drvdata(dev, tc6393xb);
-+	tc6393xb->iomem	= iomem;
-+	tc6393xb->irq	= platform_get_irq(dev, 0);
-+
-+	rscr		= &tc6393xb->rscr;
-+	rscr->name	= "tc6393xb-core";
-+	rscr->start	= iomem->start;
-+	rscr->end	= iomem->start + 0xff;
-+	rscr->flags	= IORESOURCE_MEM;
-+
-+	retval = request_resource(iomem, rscr);
-+	if (retval)
-+		goto err_request_scr;
-+
-+	tc6393xb->scr	= ioremap(rscr->start, rscr->end - rscr->start + 1);
-+	if (!tc6393xb->scr) {
-+		retval = -ENOMEM;
-+		goto err_ioremap;
-+	}
-+
-+	retval = tc6393xb_hw_init(dev, 0);
-+	if (retval)
-+		goto err_hw_init;
-+
-+	printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n",
-+			ioread8(&tc6393xb->scr->revid),
-+			(unsigned long) iomem->start, tc6393xb->irq);
-+
-+	if (tc6393xb->irq)
-+		tc6393xb_attach_irq(dev);
-+
-+	tc6393xb_cells[0].driver_data = tcpd->nand_data;
-+	tc6393xb_cells[1].driver_data = NULL; /* tcpd->ohci_data; */
-+	tc6393xb_cells[2].driver_data = tcpd->fb_data;
-+
-+	retval = mfd_add_devices(dev,
-+			tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
-+			iomem, 0, tcpd->irq_base);
-+
-+	if (retval == 0)
-+		return 0;
-+
-+	if (tc6393xb->irq)
-+		tc6393xb_detach_irq(dev);
-+
-+err_hw_init:
-+	iounmap(tc6393xb->scr);
-+err_ioremap:
-+	release_resource(rscr);
-+err_request_scr:
-+	kfree(tc6393xb);
-+err_kzalloc:
-+	release_resource(iomem);
-+	return retval;
-+}
-+
-+static int __devexit tc6393xb_remove(struct platform_device *dev) {
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	int ret;
-+
-+	if (tc6393xb->irq)
-+		tc6393xb_detach_irq(dev);
-+
-+	ret = tcpd->disable(dev);
-+
-+	iounmap(tc6393xb->scr);
-+	release_resource(&tc6393xb->rscr);
-+	release_resource(tc6393xb->iomem);
-+
-+	mfd_remove_devices(dev);
-+
-+	platform_set_drvdata(dev, NULL);
-+
-+	kfree(tc6393xb);
-+
-+	return ret;
-+}
-+
-+#ifdef CONFIG_PM
-+static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr = tc6393xb->scr;
-+	int i;
-+
-+
-+	tc6393xb->suspend_state.ccr.raw		= ioread16(&scr->ccr);
-+	tc6393xb->suspend_state.fer.raw		= ioread8(&scr->fer);
-+	for (i = 0; i < 4; i++)
-+		tc6393xb->suspend_state.gpi_bcr[i] =
-+			ioread8(scr->gpi_bcr + i);
-+
-+	return tcpd->suspend(dev);
-+}
-+
-+static int tc6393xb_resume(struct platform_device *dev)
-+{
-+	return tc6393xb_hw_init(dev, 1);
-+}
-+#else
-+#define tc6393xb_suspend NULL
-+#define tc6393xb_resume NULL
-+#endif
-+
-+static struct platform_driver tc6393xb_driver = {
-+	.probe = tc6393xb_probe,
-+	.remove = __devexit_p(tc6393xb_remove),
-+	.suspend = tc6393xb_suspend,
-+	.resume = tc6393xb_resume,
-+
-+	.driver = {
-+		.name = "tc6393xb",
-+		.owner		= THIS_MODULE,
-+	},
-+};
-+
-+static int __init tc6393xb_init(void)
-+{
-+	return platform_driver_register(&tc6393xb_driver);
-+}
-+
-+static void __exit tc6393xb_exit(void)
-+{
-+	platform_driver_unregister(&tc6393xb_driver);
-+}
-+
-+module_init(tc6393xb_init);
-+module_exit(tc6393xb_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
-+MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
-diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
-new file mode 100644
-index 0000000..e699294
---- /dev/null
-+++ b/include/linux/mfd/tc6393xb.h
-@@ -0,0 +1,108 @@
-+/*
-+ * Toshiba TC6393XB SoC support
-+ *
-+ * Copyright(c) 2005-2006 Chris Humbert
-+ * Copyright(c) 2005 Dirk Opfer
-+ * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
-+ * Copyright(c) 2007 Dmitry Baryshkov
-+ *
-+ * Based on code written by Sharp/Lineo for 2.4 kernels
-+ * Based on locomo.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef TC6393XB_H
-+#define TC6393XB_H
-+
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+
-+union tc6393xb_scr_fer {
-+	u8		raw;
-+struct {
-+	unsigned	usben:1;	/* D0	USB enable		*/
-+	unsigned	lcdcven:1;	/* D1	polysylicon TFT enable	*/
-+	unsigned	slcden:1;	/* D2	SLCD enable		*/
-+} __attribute__ ((packed)) bits;
-+} __attribute__ ((packed));
-+
-+union tc6393xb_scr_ccr {
-+	u16		raw;
-+struct {
-+	unsigned	ck32ken:1;	/* D0	SD host clock enable	*/
-+	unsigned	usbcken:1;	/* D1	USB host clock enable	*/
-+	unsigned	x00:2;
-+	unsigned	sharp:1;	/* D4	??? set in Sharp's code	*/
-+	unsigned	x01:3;
-+	enum {				disable	= 0,
-+					m12MHz	= 1,
-+					m24MHz	= 2,
-+					m48MHz	= 3,
-+	}		mclksel:3;	/* D10-D8  LCD controller clock	*/
-+	unsigned	x02:1;
-+	enum {				h24MHz	= 0,
-+					h48MHz	= 1,
-+	}		hclksel:2;	/* D13-D12 host bus clock	*/
-+	unsigned	x03:2;
-+} __attribute__ ((packed)) bits;
-+} __attribute__ ((packed));
-+
-+enum pincontrol {
-+	opendrain	= 0,
-+	tristate	= 1,
-+	pushpull	= 2,
-+	/* reserved	= 3, */
-+};
-+
-+union tc6393xb_scr_mcr {
-+	u16		raw;
-+struct {
-+	enum pincontrol	rdyst:2;	/* D1-D0   HRDY control		*/
-+	unsigned	x00:1;
-+	unsigned	aren:1;		/* D3	   HRDY pull up resistance cut off */
-+	enum pincontrol	intst:2;	/* D5-D4   #HINT control	*/
-+	unsigned	x01:1;
-+	unsigned	aien:1;		/* D7      #HINT pull up resitance cut off */
-+	unsigned	x02:8;
-+} __attribute__ ((packed)) bits;
-+} __attribute__ ((packed));
-+
-+struct tc6393xb_platform_data {
-+	u16	scr_pll2cr;	/* PLL2 Control */
-+	union tc6393xb_scr_ccr	scr_ccr;	/* Clock Control */
-+	union tc6393xb_scr_mcr	scr_mcr;	/* Mode Control */
-+	u16	scr_gper;	/* GP Enable */
-+	u32	scr_gpo_doecr;	/* GPO Data OE Control */
-+	u32	scr_gpo_dsr;	/* GPO Data Set */
-+
-+	int	(*enable)(struct platform_device *dev);
-+	int	(*disable)(struct platform_device *dev);
-+	int	(*suspend)(struct platform_device *dev);
-+	int	(*resume)(struct platform_device *dev);
-+
-+	int	irq_base;	/* a base for cascaded irq */
-+
-+	struct tmio_nand_data	*nand_data;
-+	struct tmio_fb_data	*fb_data;
-+};
-+
-+extern int tc6393xb_lcd_set_power(struct platform_device *fb_dev, bool on);
-+extern int tc6393xb_lcd_mode(struct platform_device *fb_dev,
-+					struct fb_videomode *mode);
-+
-+
-+/*
-+ * Relative to irq_base
-+ */
-+#define	IRQ_TC6393_NAND		0
-+#define	IRQ_TC6393_MMC		1
-+#define	IRQ_TC6393_OHCI		2
-+#define	IRQ_TC6393_SERIAL	3
-+#define	IRQ_TC6393_FB		4
-+
-+#define	TC6393XB_NR_IRQS	8
-+
-+#endif
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0005-Add-support-for-tc6387xb-MFD-core.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0005-Add-support-for-tc6387xb-MFD-core.patch
deleted file mode 100644
index 7183e3af6d..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0005-Add-support-for-tc6387xb-MFD-core.patch
+++ /dev/null
@@ -1,249 +0,0 @@
-From a6a6faf1dbb90c950fe55a1719720457bfb5830a Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Sun, 16 Dec 2007 02:19:49 +0000
-Subject: [PATCH 05/64] Add support for tc6387xb MFD core
-
----
- drivers/mfd/Kconfig          |    6 ++
- drivers/mfd/Makefile         |    1 +
- drivers/mfd/tc6387xb.c       |  163 ++++++++++++++++++++++++++++++++++++++++++
- include/linux/mfd/tc6387xb.h |   28 +++++++
- 4 files changed, 198 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mfd/tc6387xb.c
- create mode 100644 include/linux/mfd/tc6387xb.h
-
-diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
-index 9903d0a..1575323 100644
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -9,6 +9,12 @@ config MFD_CORE
- 	tristate
- 	default n
- 
-+config MFD_TC6387XB
-+	bool "Support Toshiba TC6387XB"
-+	select MFD_CORE
-+	help
-+	  Support for Toshiba Mobile IO Controller TC6387XB
-+
- config MFD_TC6393XB
- 	bool "Support Toshiba TC6393XB"
- 	select MFD_CORE
-diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
-index ffd342e..41b2190 100644
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_MFD_SM501)		+= sm501.o
- 
- obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
- 
-+obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
- obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
- 
- obj-$(CONFIG_MCP)		+= mcp-core.o
-diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
-new file mode 100644
-index 0000000..c81fca2
---- /dev/null
-+++ b/drivers/mfd/tc6387xb.c
-@@ -0,0 +1,163 @@
-+/*
-+ * Toshiba TC6387XB support
-+ * Copyright (c) 2005 Ian Molton
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file contains TC6387XB base support.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tc6387xb.h>
-+
-+#ifdef CONFIG_PM
-+static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev);
-+
-+	if (pdata && pdata->suspend)
-+		pdata->suspend(dev);
-+
-+	return 0;
-+}
-+
-+static int tc6387xb_resume(struct platform_device *dev)
-+{
-+	struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev);
-+
-+	if (pdata && pdata->resume)
-+		pdata->resume(dev);
-+
-+	return 0;
-+}
-+#else
-+#define tc6387xb_suspend  NULL
-+#define tc6387xb_resume   NULL
-+#endif
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static int tc6387xb_mmc_enable(struct platform_device *mmc) {
-+	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
-+	struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data;
-+
-+	if(tc6387xb->enable_mmc_clock)
-+		tc6387xb->enable_mmc_clock(dev);
-+
-+	return 0;
-+}
-+
-+static int tc6387xb_mmc_disable(struct platform_device *mmc) {
-+	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
-+	struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data;
-+
-+	if(tc6387xb->disable_mmc_clock)
-+		tc6387xb->disable_mmc_clock(dev);
-+
-+	return 0;
-+}
-+
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static struct resource tc6387xb_mmc_resources[] = {
-+	{
-+		.name = TMIO_MMC_CONTROL,
-+		.start = 0x800,
-+		.end   = 0x9ff,
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.name = TMIO_MMC_CONFIG,
-+		.start = 0x200,
-+		.end   = 0x2ff,
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.name  = TMIO_MMC_IRQ,
-+		.start = 0,
-+		.end   = 0,
-+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE,
-+	},
-+};
-+
-+static struct mfd_cell tc6387xb_cells[] = {
-+	{
-+		.name = "tmio-mmc",
-+		.enable = tc6387xb_mmc_enable,
-+		.disable = tc6387xb_mmc_disable,
-+		.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
-+		.resources = tc6387xb_mmc_resources,
-+	},
-+};
-+
-+static int tc6387xb_probe(struct platform_device *dev)
-+{
-+	struct tc6387xb_platform_data *data = platform_get_drvdata(dev);
-+	struct resource *iomem;
-+	int irq;
-+
-+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+	if (!iomem)
-+		return -EINVAL;
-+
-+	irq   = platform_get_irq(dev, 0);
-+
-+	if(data && data->enable)
-+		data->enable(dev);
-+
-+	printk(KERN_INFO "Toshiba tc6393xb initialised\n");
-+
-+	return mfd_add_devices(dev, tc6387xb_cells, ARRAY_SIZE(tc6387xb_cells),
-+	                       iomem, 0, irq);
-+}
-+
-+static int tc6387xb_remove(struct platform_device *dev)
-+{
-+	struct tc6387xb_platform_data *data = platform_get_drvdata(dev);
-+
-+	if(data && data->disable)
-+		data->disable(dev);
-+
-+	return 0;
-+}
-+
-+
-+static struct platform_driver tc6387xb_platform_driver = {
-+	.driver = {
-+		.name		= "tc6387xb",
-+	},
-+	.probe		= tc6387xb_probe,
-+	.remove		= tc6387xb_remove,
-+	.suspend        = tc6387xb_suspend,
-+	.resume         = tc6387xb_resume,
-+};
-+
-+
-+static int __init tc6387xb_init(void)
-+{
-+	return platform_driver_register (&tc6387xb_platform_driver);
-+}
-+
-+static void __exit tc6387xb_exit(void)
-+{
-+	platform_driver_unregister(&tc6387xb_platform_driver);
-+}
-+
-+module_init(tc6387xb_init);
-+module_exit(tc6387xb_exit);
-+
-+MODULE_DESCRIPTION("Toshiba TC6387XB core driver");
-+MODULE_LICENSE("GPLv2");
-+MODULE_AUTHOR("Ian Molton");
-diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h
-new file mode 100644
-index 0000000..496770b
---- /dev/null
-+++ b/include/linux/mfd/tc6387xb.h
-@@ -0,0 +1,28 @@
-+/*
-+ * linux/include/asm-arm/hardware/tc6387xb.h
-+ *
-+ * This file contains the definitions for the TC6393XB
-+ *
-+ * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
-+ *
-+ * May be copied or modified under the terms of the GNU General Public
-+ * License.  See linux/COPYING for more information.
-+ *
-+ */
-+#ifndef MFD_T7L66XB_H
-+#define MFD_T7L66XB_H
-+
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+
-+struct tc6387xb_platform_data
-+{
-+	int (*enable_mmc_clock)(struct platform_device *dev);
-+	int (*disable_mmc_clock)(struct platform_device *dev);
-+	int (*enable)(struct platform_device *dev);
-+	int (*disable)(struct platform_device *dev);
-+	int (*suspend)(struct platform_device *dev);
-+	int (*resume)(struct platform_device *dev);
-+};
-+
-+#endif
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0006-Add-support-for-t7l66xb-MFD-core.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0006-Add-support-for-t7l66xb-MFD-core.patch
deleted file mode 100644
index e7aff2455b..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0006-Add-support-for-t7l66xb-MFD-core.patch
+++ /dev/null
@@ -1,653 +0,0 @@
-From 2e31fea352ca97988452f1f2c94809de2977ce40 Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Sat, 29 Dec 2007 15:08:52 +0000
-Subject: [PATCH 06/64] Add support for t7l66xb MFD core
-
----
- drivers/mfd/Kconfig         |    6 +
- drivers/mfd/Makefile        |    1 +
- drivers/mfd/t7l66xb.c       |  550 +++++++++++++++++++++++++++++++++++++++++++
- include/linux/mfd/t7l66xb.h |   45 ++++
- 4 files changed, 602 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mfd/t7l66xb.c
- create mode 100644 include/linux/mfd/t7l66xb.h
-
-diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
-index 1575323..f79a969 100644
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -9,6 +9,12 @@ config MFD_CORE
- 	tristate
- 	default n
- 
-+config MFD_T7L66XB
-+	bool "Support Toshiba T7L66XB"
-+	select MFD_CORE
-+	help
-+	  Support for Toshiba Mobile IO Controller T7L66XB
-+
- config MFD_TC6387XB
- 	bool "Support Toshiba TC6387XB"
- 	select MFD_CORE
-diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
-index 41b2190..b2037ae 100644
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_MFD_SM501)		+= sm501.o
- 
- obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
- 
-+obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o
- obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
- obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
- 
-diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
-new file mode 100644
-index 0000000..308776a
---- /dev/null
-+++ b/drivers/mfd/t7l66xb.c
-@@ -0,0 +1,550 @@
-+/*
-+ *
-+ * Toshiba T7L66XB core mfd support
-+ *
-+ * Copyright (c) 2005 Ian Molton
-+ * Copyright (c) 2007 Ian Molton
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * T7L66 features:
-+ *
-+ * Supported in this driver:
-+ * SD/MMC
-+ * SM/NAND flash controller
-+ * OHCI controller
-+ *
-+ * As yet not supported
-+ * GPIO interface (on NAND pins)
-+ * Serial interface
-+ * TFT 'interface converter'
-+ * PCMCIA interface logic
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+#include <linux/mfd/t7l66xb.h>
-+
-+union t7l66xb_dev_ctl {
-+        u8             raw;
-+struct {
-+        unsigned        usb_en:1;      /* D0   USB enable   */
-+        unsigned        mmc_en:1;      /* D1   MMC enable   */
-+} __attribute__ ((packed));
-+} __attribute__ ((packed));
-+
-+
-+struct t7l66xb_scr {
-+        u8 x00[8];
-+        u8      revid;          /* 0x08 Revision ID                     */
-+        u8 x01[57];
-+        u8      imr;            /* 0x42 Interrupt Mask                  */
-+	u8 x03[157];
-+        union t7l66xb_dev_ctl     dev_ctl; /* 0xe0 Device control       */
-+        u8      isr;            /* 0xe1 Interrupt Status                */
-+        u8 x04[14];
-+        u8      gpio_output_ctl;    /* 0xf0 */
-+        u8      gpio_output_status; /* 0xf1 */
-+        u16     gpio_input_status;  /* 0xf2 */
-+        u8 x05[4];
-+        u8      active_pullup_down_ctl; /* 0xf8 */
-+        u8 x06[7];
-+} __attribute__ ((packed));
-+
-+
-+/*--------------------------------------------------------------------------*/
-+
-+struct t7l66xb
-+{
-+	struct t7l66xb_scr __iomem     *scr;
-+	spinlock_t                      lock;
-+
-+	struct resource                 rscr;
-+	struct resource                 *iomem;
-+	int                             irq;
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static int t7l66xb_ohci_enable(struct platform_device *ohci)
-+{
-+        struct platform_device          *dev    = to_platform_device(ohci->dev.parent);
-+        struct t7l66xb                  *t7l66xb = platform_get_drvdata(dev);
-+        struct t7l66xb_scr __iomem      *scr    = t7l66xb->scr;
-+        unsigned long                   flags;
-+	union t7l66xb_dev_ctl           dev_ctl;
-+
-+        spin_lock_irqsave(&t7l66xb->lock, flags);
-+
-+        dev_ctl.raw = readb(&scr->dev_ctl);
-+        dev_ctl.usb_en = 1;
-+        writeb(dev_ctl.raw, &scr->dev_ctl);
-+
-+        spin_unlock_irqrestore(&t7l66xb->lock, flags);
-+
-+        return 0;
-+}
-+
-+static int t7l66xb_ohci_disable(struct platform_device *ohci)
-+{
-+        struct platform_device          *dev    = to_platform_device(ohci->dev.parent);
-+        struct t7l66xb                  *t7l66xb = platform_get_drvdata(dev);
-+        struct t7l66xb_scr __iomem      *scr    = t7l66xb->scr;
-+        unsigned long                   flags;
-+        union t7l66xb_dev_ctl           dev_ctl;
-+
-+        spin_lock_irqsave(&t7l66xb->lock, flags);
-+
-+        dev_ctl.raw = readb(&scr->dev_ctl);
-+        dev_ctl.usb_en = 0;
-+        writeb(dev_ctl.raw, &scr->dev_ctl);
-+
-+        spin_unlock_irqrestore(&t7l66xb->lock, flags);
-+
-+        return 0;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static int t7l66xb_mmc_enable(struct platform_device *ohci)
-+{
-+        struct platform_device          *dev    = to_platform_device(ohci->dev.parent);
-+        struct t7l66xb_platform_data   *pdata = dev->dev.platform_data;
-+        struct t7l66xb                  *t7l66xb = platform_get_drvdata(dev);
-+        struct t7l66xb_scr __iomem      *scr    = t7l66xb->scr;
-+        unsigned long                   flags;
-+	union t7l66xb_dev_ctl           dev_ctl;
-+
-+        spin_lock_irqsave(&t7l66xb->lock, flags);
-+
-+        if(pdata->enable_clk32k)
-+                pdata->enable_clk32k(dev);
-+        dev_ctl.raw = readb(&scr->dev_ctl);
-+        dev_ctl.mmc_en = 1;
-+        writeb(dev_ctl.raw, &scr->dev_ctl);
-+
-+        spin_unlock_irqrestore(&t7l66xb->lock, flags);
-+
-+        return 0;
-+}
-+
-+static int t7l66xb_mmc_disable(struct platform_device *ohci)
-+{
-+        struct platform_device          *dev    = to_platform_device(ohci->dev.parent);
-+        struct t7l66xb_platform_data   *pdata = dev->dev.platform_data;
-+        struct t7l66xb                  *t7l66xb = platform_get_drvdata(dev);
-+        struct t7l66xb_scr __iomem      *scr    = t7l66xb->scr;
-+        unsigned long                   flags;
-+        union t7l66xb_dev_ctl           dev_ctl;
-+
-+        spin_lock_irqsave(&t7l66xb->lock, flags);
-+
-+        dev_ctl.raw = readb(&scr->dev_ctl);
-+        dev_ctl.mmc_en = 0;
-+        writeb(dev_ctl.raw, &scr->dev_ctl);
-+        if(pdata->disable_clk32k)
-+                pdata->disable_clk32k(dev);
-+
-+        spin_unlock_irqrestore(&t7l66xb->lock, flags);
-+
-+        return 0;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static int t7l66xb_nand_disable(struct platform_device *nand)
-+{
-+        struct platform_device          *dev    = to_platform_device(nand->dev.parent);
-+        struct t7l66xb                  *t7l66xb = platform_get_drvdata(dev);
-+        struct t7l66xb_scr __iomem      *scr    = t7l66xb->scr;
-+        unsigned long                   flags;
-+        union t7l66xb_dev_ctl           dev_ctl;
-+
-+        spin_lock_irqsave(&t7l66xb->lock, flags);
-+
-+        dev_ctl.raw = readb(&scr->dev_ctl);
-+//        dev_ctl.nand_en = 0;
-+        writeb(dev_ctl.raw, &scr->dev_ctl);
-+
-+        spin_unlock_irqrestore(&t7l66xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int t7l66xb_nand_enable(struct platform_device *nand)
-+{
-+        struct platform_device          *dev    = to_platform_device(nand->dev.parent);
-+        struct t7l66xb                  *t7l66xb = platform_get_drvdata(dev);
-+        struct t7l66xb_scr __iomem      *scr    = t7l66xb->scr;
-+        unsigned long                   flags;
-+        union t7l66xb_dev_ctl           dev_ctl;
-+
-+        spin_lock_irqsave(&t7l66xb->lock, flags);
-+
-+        dev_ctl.raw = readb(&scr->dev_ctl);
-+ //       dev_ctl.nand_en = 1;
-+        writeb(dev_ctl.raw, &scr->dev_ctl);
-+
-+        spin_unlock_irqrestore(&t7l66xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+const static struct resource t7l66xb_mmc_resources[] = {
-+	{
-+		.name = TMIO_MMC_CONTROL,
-+		.start = 0x800,
-+		.end   = 0x9ff,
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.name = TMIO_MMC_CONFIG,
-+		.start = 0x200,
-+		.end   = 0x2ff,
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.name  = TMIO_MMC_IRQ,
-+		.start = IRQ_T7L66XB_MMC,
-+		.end   = IRQ_T7L66XB_MMC,
-+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE,
-+	},
-+};
-+
-+const static struct resource t7l66xb_ohci_resources[] = {
-+        {
-+                .name   = TMIO_OHCI_CONFIG,
-+                .start  = 0x0300,
-+                .end    = 0x03ff,
-+                .flags  = IORESOURCE_MEM,
-+        },
-+        {
-+                .name   = TMIO_OHCI_CONTROL,
-+                .start  = 0xa00,
-+                .end    = 0xbff,
-+                .flags  = IORESOURCE_MEM,
-+        },
-+        {
-+                .name   = TMIO_OHCI_SRAM,
-+                .start  = 0x01000,
-+                .end    = 0x02fff,
-+                .flags  = IORESOURCE_MEM,
-+        },
-+        {
-+                .name   = TMIO_OHCI_IRQ,
-+                .start  = IRQ_T7L66XB_OHCI,
-+                .end    = IRQ_T7L66XB_OHCI,
-+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE,
-+        },
-+};
-+
-+const static struct resource t7l66xb_nand_resources[] = {
-+        {
-+                .name   = TMIO_NAND_CONFIG,
-+                .start  = 0x0100,
-+                .end    = 0x01ff,
-+                .flags  = IORESOURCE_MEM,
-+        },
-+        {
-+                .name   = TMIO_NAND_CONTROL,
-+                .start  = 0xc00,
-+                .end    = 0xc07,
-+                .flags  = IORESOURCE_MEM,
-+        },
-+        {
-+                .name   = TMIO_NAND_IRQ,
-+                .start  = IRQ_T7L66XB_NAND,
-+                .end    = IRQ_T7L66XB_NAND,
-+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE,
-+        },
-+};
-+
-+static struct mfd_cell t7l66xb_cells[] = {
-+	{
-+		.name = "tmio-mmc",
-+		.enable = t7l66xb_mmc_enable,
-+		.disable = t7l66xb_mmc_disable,
-+		.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
-+		.resources = t7l66xb_mmc_resources,
-+	},
-+        {
-+                .name = "tmio-ohci",
-+                .enable = t7l66xb_ohci_enable,
-+                .disable = t7l66xb_ohci_disable,
-+                .num_resources = ARRAY_SIZE(t7l66xb_ohci_resources),
-+                .resources = t7l66xb_ohci_resources,
-+        },
-+        {
-+                .name = "tmio-nand",
-+                .enable = t7l66xb_nand_enable,
-+                .disable = t7l66xb_nand_disable,
-+                .num_resources = ARRAY_SIZE(t7l66xb_nand_resources),
-+                .resources = t7l66xb_nand_resources,
-+        },
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* Handle the T7L66XB interrupt mux */
-+static void t7l66xb_irq(unsigned int irq, struct irq_desc *desc)
-+{
-+	struct platform_device         *dev    = get_irq_chip_data(irq);
-+	struct t7l66xb_platform_data   *tcpd   = dev->dev.platform_data;
-+	struct t7l66xb                 *t7l66xb = platform_get_drvdata(dev);
-+	struct t7l66xb_scr __iomem     *scr    = t7l66xb->scr;
-+	unsigned int                   isr;
-+	unsigned int                   i;
-+
-+	desc->chip->ack(irq);
-+	while ((isr = readb(&scr->isr) & ~readb(&scr->imr)))
-+		for (i = 0; i < T7L66XB_NR_IRQS; i++)
-+			if (isr & (1 << i))
-+				desc_handle_irq(tcpd->irq_base + i,
-+				                irq_desc + tcpd->irq_base + i);
-+}
-+
-+static void t7l66xb_irq_mask(unsigned int irq)
-+{
-+        struct platform_device          *dev    = get_irq_chip_data(irq);
-+        struct t7l66xb_platform_data   *tcpd   = dev->dev.platform_data;
-+        struct t7l66xb                 *t7l66xb = platform_get_drvdata(dev);
-+        struct t7l66xb_scr __iomem     *scr    = t7l66xb->scr;
-+        unsigned long                   flags;
-+
-+        spin_lock_irqsave(&t7l66xb->lock, flags);
-+        iowrite8(ioread8(&scr->imr) | (1 << (irq - tcpd->irq_base)),
-+                                                                &scr->imr);
-+        spin_unlock_irqrestore(&t7l66xb->lock, flags);
-+}
-+
-+static void t7l66xb_irq_unmask(unsigned int irq)
-+{
-+        struct platform_device          *dev    = get_irq_chip_data(irq);
-+        struct t7l66xb_platform_data   *tcpd   = dev->dev.platform_data;
-+        struct t7l66xb                 *t7l66xb = platform_get_drvdata(dev);
-+        struct t7l66xb_scr __iomem     *scr    = t7l66xb->scr;
-+        unsigned long                   flags;
-+
-+        spin_lock_irqsave(&t7l66xb->lock, flags);
-+        iowrite8(ioread8(&scr->imr) & ~(1 << (irq - tcpd->irq_base)),
-+	                                                         &scr->imr);
-+        spin_unlock_irqrestore(&t7l66xb->lock, flags);
-+}
-+
-+static struct irq_chip t7l66xb_chip = {
-+	.name   = "t7l66xb",
-+	.ack	= t7l66xb_irq_mask,
-+	.mask	= t7l66xb_irq_mask,
-+	.unmask	= t7l66xb_irq_unmask,
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* Install the IRQ handler */
-+static void t7l66xb_attach_irq(struct platform_device *dev)
-+{
-+	struct t7l66xb_platform_data   *tcpd   = dev->dev.platform_data;
-+        struct t7l66xb                 *t7l66xb = platform_get_drvdata(dev);
-+        unsigned int                    irq;
-+
-+        for (
-+                        irq = tcpd->irq_base;
-+                        irq <= tcpd->irq_base + T7L66XB_NR_IRQS;
-+                        irq++) {
-+		set_irq_chip (irq, &t7l66xb_chip);
-+		set_irq_chip_data (irq, dev);
-+		set_irq_handler(irq, handle_level_irq);
-+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+	}
-+
-+	set_irq_type (t7l66xb->irq, IRQT_FALLING);
-+	set_irq_chip_data (t7l66xb->irq, dev);
-+        set_irq_chained_handler (t7l66xb->irq, t7l66xb_irq);
-+}
-+
-+static void t7l66xb_detach_irq(struct platform_device *dev)
-+{
-+        struct t7l66xb_platform_data   *tcpd   = dev->dev.platform_data;
-+        struct t7l66xb                 *t7l66xb = platform_get_drvdata(dev);
-+        unsigned int                    irq;
-+
-+        set_irq_chained_handler(t7l66xb->irq, NULL);
-+        set_irq_chip_data(t7l66xb->irq, NULL);
-+
-+        for (
-+                        irq = tcpd->irq_base;
-+                        irq <= tcpd->irq_base + T7L66XB_NR_IRQS;
-+                        irq++) {
-+                set_irq_flags(irq, 0);
-+                set_irq_chip(irq, NULL);
-+                set_irq_chip_data(irq, NULL);
-+        }
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+#ifdef CONFIG_PM
-+static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
-+
-+
-+	if (pdata && pdata->suspend)
-+		pdata->suspend(dev);
-+
-+	return 0;
-+}
-+
-+static int t7l66xb_resume(struct platform_device *dev)
-+{
-+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
-+
-+	if (pdata && pdata->resume)
-+		pdata->resume(dev);
-+
-+	return 0;
-+}
-+#else
-+#define t7l66xb_suspend NULL
-+#define t7l66xb_resume  NULL
-+#endif
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static int t7l66xb_probe(struct platform_device *dev)
-+{
-+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
-+	struct t7l66xb *t7l66xb;
-+	struct resource *iomem;
-+	struct resource *rscr;
-+	int retval = -ENOMEM;
-+	
-+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+        if (!iomem)
-+                return -EINVAL;
-+
-+	t7l66xb = kzalloc (sizeof *t7l66xb, GFP_KERNEL);
-+	if (!t7l66xb)
-+		goto err_kzalloc;
-+
-+	spin_lock_init(&t7l66xb->lock);
-+
-+	platform_set_drvdata(dev, t7l66xb);
-+	t7l66xb->iomem = iomem;
-+        t7l66xb->irq   = platform_get_irq(dev, 0);
-+
-+	rscr            = &t7l66xb->rscr;
-+        rscr->name      = "t7l66xb-core";
-+        rscr->start     = iomem->start;
-+        rscr->end       = iomem->start + 0xff;
-+        rscr->flags     = IORESOURCE_MEM;
-+
-+        if((retval = request_resource(iomem, rscr)))
-+                goto err_request_scr;
-+
-+	t7l66xb->scr   = ioremap(rscr->start, rscr->end - rscr->start + 1);
-+        if (!t7l66xb->scr) {
-+                retval = -ENOMEM;
-+                goto err_ioremap;
-+        }
-+
-+        if (pdata && pdata->enable)
-+                pdata->enable(dev);
-+
-+	writeb(0xbf, &t7l66xb->scr->imr); /* Mask all interrupts */
-+
-+	printk(KERN_INFO "%s rev %d @ 0x%08lx, irq %d\n",
-+	       dev->name,  readb(&t7l66xb->scr->revid),
-+	       (unsigned long)t7l66xb->scr, t7l66xb->irq);
-+
-+	if(t7l66xb->irq)
-+		t7l66xb_attach_irq(dev);
-+
-+	t7l66xb_cells[2].driver_data = pdata->nand_data;
-+
-+	if(!(retval = mfd_add_devices(dev, t7l66xb_cells,
-+	                              ARRAY_SIZE(t7l66xb_cells),
-+	                              iomem, 0, pdata->irq_base)))
-+		return 0;
-+
-+	if(t7l66xb->irq)
-+		t7l66xb_detach_irq(dev);
-+
-+        iounmap(t7l66xb->scr);
-+err_ioremap:
-+        release_resource(rscr);
-+err_request_scr:
-+        kfree(t7l66xb);
-+err_kzalloc:
-+        release_resource(iomem);
-+        return retval;
-+}
-+
-+static int t7l66xb_remove(struct platform_device *dev)
-+{
-+	struct t7l66xb_platform_data   *pdata   = dev->dev.platform_data;
-+        struct t7l66xb                 *t7l66xb = platform_get_drvdata(dev);
-+        int ret;
-+
-+        if (t7l66xb->irq)
-+                t7l66xb_detach_irq(dev);
-+
-+        ret = pdata->disable(dev);
-+
-+        iounmap(t7l66xb->scr);
-+        release_resource(&t7l66xb->rscr);
-+        release_resource(t7l66xb->iomem);
-+
-+        mfd_remove_devices(dev);
-+
-+        platform_set_drvdata(dev, NULL);
-+
-+        kfree(t7l66xb);
-+
-+        return ret;
-+
-+}
-+
-+static struct platform_driver t7l66xb_platform_driver = {
-+	.driver = {
-+		.name    = "t7l66xb",
-+		.owner   = THIS_MODULE,
-+	},
-+	.suspend	= t7l66xb_suspend,
-+	.resume		= t7l66xb_resume,
-+	.probe		= t7l66xb_probe,
-+	.remove		= t7l66xb_remove,
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static int __init t7l66xb_init(void)
-+{
-+	int retval = 0;
-+		
-+	retval = platform_driver_register (&t7l66xb_platform_driver);
-+	return retval;
-+}
-+
-+static void __exit t7l66xb_exit(void)
-+{
-+	platform_driver_unregister(&t7l66xb_platform_driver);
-+}
-+
-+module_init(t7l66xb_init);
-+module_exit(t7l66xb_exit);
-+
-+MODULE_DESCRIPTION("Toshiba T7L66XB core driver");
-+MODULE_LICENSE("GPLv2");
-+MODULE_AUTHOR("Ian Molton");
-+
-diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h
-new file mode 100644
-index 0000000..06b8de5
---- /dev/null
-+++ b/include/linux/mfd/t7l66xb.h
-@@ -0,0 +1,45 @@
-+/*
-+ * linux/include/asm-arm/hardware/t7l66xb.h
-+ *
-+ * This file contains the definitions for the T7L66XB
-+ *
-+ * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef _ASM_ARCH_T7L66XB_SOC
-+#define _ASM_ARCH_T7L66XB_SOC
-+
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+
-+
-+struct t7l66xb_platform_data
-+{
-+        int (*enable_clk32k)(struct platform_device *dev);
-+        int (*disable_clk32k)(struct platform_device *dev);
-+
-+	int     (*enable)(struct platform_device *dev);
-+	int     (*disable)(struct platform_device *dev);
-+	int     (*suspend)(struct platform_device *dev);
-+	int     (*resume)(struct platform_device *dev);
-+
-+	int     irq_base;       /* a base for cascaded irq */
-+
-+	struct tmio_nand_data   *nand_data;
-+};
-+
-+
-+#define T7L66XB_NAND_CNF_BASE  (0x000100)
-+#define T7L66XB_NAND_CTL_BASE  (0x001000)
-+
-+#define IRQ_T7L66XB_NAND       (3)
-+#define IRQ_T7L66XB_MMC        (1)
-+#define IRQ_T7L66XB_OHCI       (2)
-+
-+#define T7L66XB_NR_IRQS	8
-+
-+#endif
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0007-Common-headers-for-TMIO-MFD-subdevices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0007-Common-headers-for-TMIO-MFD-subdevices.patch
deleted file mode 100644
index 2f5f11400c..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0007-Common-headers-for-TMIO-MFD-subdevices.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From d6e8b347dbcce9e0e8d2204b774c1c33cfcb483e Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Sat, 29 Dec 2007 15:27:43 +0000
-Subject: [PATCH 07/64] Common headers for TMIO MFD subdevices
-
----
- include/linux/mfd/tmio.h |   62 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 62 insertions(+), 0 deletions(-)
- create mode 100644 include/linux/mfd/tmio.h
-
-diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
-new file mode 100644
-index 0000000..b42a4c3
---- /dev/null
-+++ b/include/linux/mfd/tmio.h
-@@ -0,0 +1,62 @@
-+#ifndef MFD_TMIO_H
-+#define MFD_TMIO_H
-+
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+
-+struct fb_videomode;
-+
-+/*
-+ * data for the NAND controller
-+ */
-+struct tmio_nand_data {
-+	struct nand_bbt_descr	*badblock_pattern;
-+	struct mtd_partition	*partition;
-+	unsigned int		num_partitions;
-+};
-+
-+struct tmio_fb_data {
-+	int			(*lcd_set_power)(struct platform_device *fb_dev,
-+								bool on);
-+	int			(*lcd_mode)(struct platform_device *fb_dev,
-+						struct fb_videomode *mode);
-+	int			num_modes;
-+	struct fb_videomode	*modes;
-+};
-+
-+static u32 __maybe_unused tmio_ioread32(const void __iomem *addr)
-+{
-+	return ((u32) ioread16(addr)) | (((u32) ioread16(addr + 2)) << 16);
-+}
-+
-+static u32 __maybe_unused tmio_iowrite32(u32 val, const void __iomem *addr)
-+{
-+	iowrite16(val,		addr);
-+	iowrite16(val >> 16,	addr + 2);
-+	return val;
-+}
-+
-+#define FBIO_TMIO_ACC_WRITE	0x7C639300
-+#define FBIO_TMIO_ACC_SYNC	0x7C639301
-+
-+#define TMIO_MMC_CONFIG         "tmio-mmc-config"
-+#define TMIO_MMC_CONTROL        "tmio-mmc-control"
-+#define TMIO_MMC_IRQ            "tmio-mmc"
-+
-+#define TMIO_NAND_CONFIG	"tmio-nand-config"
-+#define TMIO_NAND_CONTROL	"tmio-nand-control"
-+#define TMIO_NAND_IRQ		"tmio-nand"
-+
-+#define TMIO_FB_CONFIG		"tmio-fb-config"
-+#define TMIO_FB_CONTROL		"tmio-fb-control"
-+#define TMIO_FB_VRAM		"tmio-fb-vram"
-+#define TMIO_FB_IRQ		"tmio-fb"
-+
-+#define TMIO_OHCI_CONFIG	"tmio-ohci-config"
-+#define TMIO_OHCI_CONTROL	"tmio-ohci-control"
-+#define TMIO_OHCI_SRAM		"tmio-ohci-sram"
-+#define TMIO_OHCI_SRAM_ALIAS	"tmio-ohci-sram-alias"
-+#define TMIO_OHCI_IRQ		"tmio-ohci"
-+
-+#endif
-+
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0008-Nand-driver-for-TMIO-devices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0008-Nand-driver-for-TMIO-devices.patch
deleted file mode 100644
index 48b8000ab7..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0008-Nand-driver-for-TMIO-devices.patch
+++ /dev/null
@@ -1,608 +0,0 @@
-From 917b3997a39396f5f51418930de7b933ad053bad Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Sat, 29 Dec 2007 15:14:23 +0000
-Subject: [PATCH 08/64] Nand driver for TMIO devices
-
----
- drivers/mtd/nand/Kconfig     |    7 +
- drivers/mtd/nand/Makefile    |    1 +
- drivers/mtd/nand/tmio_nand.c |  557 ++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 565 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mtd/nand/tmio_nand.c
-
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index 246d451..43e489a 100644
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -284,6 +284,13 @@ config MTD_NAND_CM_X270
- 	depends on MTD_NAND && MACH_ARMCORE
- 
- 
-+config MTD_NAND_TMIO
-+	tristate "NAND Flash device on Toshiba Mobile IO Controller"
-+	depends on MTD_NAND && MFD_CORE
-+	help
-+	  Support for NAND flash connected to a Toshiba Mobile IO
-+	  Controller in some PDAs, including the Sharp SL6000x.
-+
- config MTD_NAND_NANDSIM
- 	tristate "Support for NAND Flash Simulator"
- 	depends on MTD_PARTITIONS
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 3ad6c01..d839ebd 100644
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
- obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
- obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
- obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
-+obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
- obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
- 
-diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
-new file mode 100644
-index 0000000..450b4ec
---- /dev/null
-+++ b/drivers/mtd/nand/tmio_nand.c
-@@ -0,0 +1,557 @@
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/nand_ecc.h>
-+#include <linux/mtd/partitions.h>
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* tmio_nfcr.mode Register Command List */
-+#define FCR_MODE_DATA		0x94	/* Data Data_Mode */
-+#define FCR_MODE_COMMAND	0x95	/* Data Command_Mode */
-+#define FCR_MODE_ADDRESS	0x96	/* Data Address_Mode */
-+
-+#define FCR_MODE_HWECC_CALC	0xB4	/* HW-ECC Data */
-+#define FCR_MODE_HWECC_RESULT	0xD4	/* HW-ECC Calculation Result Read_Mode */
-+#define FCR_MODE_HWECC_RESET	0xF4	/* HW-ECC Reset */
-+
-+#define FCR_MODE_POWER_ON	0x0C	/* Power Supply ON  to SSFDC card */
-+#define FCR_MODE_POWER_OFF	0x08	/* Power Supply OFF to SSFDC card */
-+
-+#define FCR_MODE_LED_OFF	0x00	/* LED OFF */
-+#define FCR_MODE_LED_ON		0x04	/* LED ON */
-+
-+#define FCR_MODE_EJECT_ON	0x68	/* Ejection Demand from Penguin is Advanced */
-+#define FCR_MODE_EJECT_OFF	0x08	/* Ejection Demand from Penguin is Not Advanced */
-+
-+#define FCR_MODE_LOCK		0x6C	/* Operates By Lock_Mode. Ejection Switch is Invalid */
-+#define FCR_MODE_UNLOCK		0x0C	/* Operates By UnLock_Mode.Ejection Switch is Effective */
-+
-+#define FCR_MODE_CONTROLLER_ID	0x40	/* Controller ID Read */
-+#define FCR_MODE_STANDBY	0x00	/* SSFDC card Changes Standby State */
-+
-+#define FCR_MODE_WE		0x80
-+#define FCR_MODE_ECC1		0x40
-+#define FCR_MODE_ECC0		0x20
-+#define FCR_MODE_CE		0x10
-+#define FCR_MODE_PCNT1		0x08
-+#define FCR_MODE_PCNT0		0x04
-+#define FCR_MODE_ALE		0x02
-+#define FCR_MODE_CLE		0x01
-+
-+#define FCR_STATUS_BUSY		0x80
-+
-+/*
-+  *NAND Flash Host Controller Configuration Register
-+ */
-+struct tmio_nfhccr {
-+	u8 x00[4];
-+	u16	command;	/* 0x04 Command				*/
-+	u8 x01[0x0a];
-+	u16	base[2];	/* 0x10 NAND Flash Control Reg Base Addr*/
-+	u8 x02[0x29];
-+	u8	intp;		/* 0x3d Interrupt Pin			*/
-+	u8 x03[0x0a];
-+	u8	inte;		/* 0x48 Interrupt Enable		*/
-+	u8 x04;
-+	u8	ec;		/* 0x4a Event Control			*/
-+	u8 x05;
-+	u8	icc;		/* 0x4c Internal Clock Control		*/
-+	u8 x06[0x0e];
-+	u8	eccc;		/* 0x5b ECC Control			*/
-+	u8 x07[4];
-+	u8	nftc;		/* 0x60 NAND Flash Transaction Control	*/
-+	u8	nfm;		/* 0x61 NAND Flash Monitor		*/
-+	u8	nfpsc;		/* 0x62 NAND Flash Power Supply Control	*/
-+	u8	nfdc;		/* 0x63 NAND Flash Detect Control	*/
-+	u8 x08[0x9c];
-+} __attribute__ ((packed));
-+
-+/*
-+  *NAND Flash Control Register
-+ */
-+struct tmio_nfcr {
-+union {
-+	u8	u8;		/* 0x00 Data Register			*/
-+	u16	u16;
-+	u32	u32;
-+} __attribute__ ((packed));
-+	u8	mode;		/* 0x04 Mode Register			*/
-+	u8	status;		/* 0x05 Status Register			*/
-+	u8	isr;		/* 0x06 Interrupt Status Register	*/
-+	u8	imr;		/* 0x07 Interrupt Mask Register		*/
-+} __attribute__ ((packed));
-+
-+struct tmio_nand {
-+	struct mtd_info			mtd;
-+	struct nand_chip		chip;
-+
-+	struct platform_device		*dev;
-+
-+	struct tmio_nfhccr __iomem 	*ccr;
-+	struct tmio_nfcr __iomem 	*fcr;
-+
-+	unsigned int			irq;
-+
-+	/* for tmio_nand_read_byte */
-+	u8				read;
-+	unsigned			read_good:1;
-+};
-+
-+#define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd)
-+
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+static const char *part_probes[] = { "cmdlinepart", NULL };
-+#endif
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd,
-+				   unsigned int ctrl)
-+{
-+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem *fcr = tmio->fcr;
-+	struct nand_chip *chip = mtd->priv;
-+
-+	if (ctrl & NAND_CTRL_CHANGE) {
-+		u8 mode;
-+
-+		if (ctrl & NAND_NCE) {
-+			mode = FCR_MODE_DATA;
-+
-+			if (ctrl & NAND_CLE)
-+				mode |=  FCR_MODE_CLE;
-+			else
-+				mode &= ~FCR_MODE_CLE;
-+
-+			if (ctrl & NAND_ALE)
-+				mode |=  FCR_MODE_ALE;
-+			else
-+				mode &= ~FCR_MODE_ALE;
-+		} else {
-+			mode = FCR_MODE_STANDBY;
-+		}
-+
-+		iowrite8(mode, &fcr->mode);
-+		tmio->read_good = 0;
-+	}
-+
-+	if (cmd != NAND_CMD_NONE)
-+		writeb(cmd, chip->IO_ADDR_W);
-+}
-+
-+static int tmio_nand_dev_ready(struct mtd_info *mtd)
-+{
-+	struct tmio_nand		*tmio	= mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+
-+	return !(ioread8(&fcr->status) & FCR_STATUS_BUSY);
-+}
-+
-+static irqreturn_t tmio_irq(int irq, void *__dev)
-+{
-+	struct platform_device		*dev	= __dev;
-+	struct tmio_nand		*tmio	= platform_get_drvdata(dev);
-+	struct nand_chip		*nand_chip	= &tmio->chip;
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+
-+	/* disable RDYREQ interrupt */
-+	iowrite8(0x00,	&fcr->imr);
-+
-+	if (unlikely(!waitqueue_active(&nand_chip->controller->wq)))
-+		dev_warn(&dev->dev, "spurious interrupt\n");
-+
-+	wake_up(&nand_chip->controller->wq);
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+  *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB.
-+  *This interrupt is normally disabled, but for long operations like
-+  *erase and write, we enable it to wake us up.  The irq handler
-+  *disables the interrupt.
-+ */
-+static int
-+tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip)
-+{
-+	struct tmio_nand		*tmio	= mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+	long				timeout;
-+
-+	/* enable RDYREQ interrupt */
-+	iowrite8(0x0f,	&fcr->isr);
-+	iowrite8(0x81,	&fcr->imr);
-+
-+	timeout = wait_event_timeout(nand_chip->controller->wq, tmio_nand_dev_ready(mtd),
-+			msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20));
-+
-+	if (unlikely(!tmio_nand_dev_ready(mtd))) {
-+		iowrite8(0x00,	&fcr->imr);
-+		dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n",
-+				nand_chip->state == FL_ERASING ? "erase" : "program",
-+				nand_chip->state == FL_ERASING ? 400 : 20);
-+
-+	} else if (unlikely(!timeout)) {
-+		iowrite8(0x00,	&fcr->imr);
-+		dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n");
-+	}
-+
-+	nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-+	return nand_chip->read_byte(mtd);
-+}
-+
-+/*
-+  *The TMIO controller combines two 8-bit data bytes into one 16-bit
-+  *word. This function separates them so nand_base.c works as expected,
-+  *especially its NAND_CMD_READID routines.
-+ *
-+  *To prevent stale data from being read, tmio_nand_hwcontrol() clears
-+  *tmio->read_good.
-+ */
-+static u_char tmio_nand_read_byte(struct mtd_info *mtd)
-+{
-+	struct tmio_nand		*tmio	= mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+	unsigned int			data;
-+
-+	if (tmio->read_good--)
-+		return tmio->read;
-+
-+	data		= ioread16(&fcr->u16);
-+	tmio->read	= data >> 8;
-+	return data;
-+}
-+
-+/*
-+  *The TMIO controller converts an 8-bit NAND interface to a 16-bit
-+  *bus interface, so all data reads and writes must be 16-bit wide.
-+  *Thus, we implement 16-bit versions of the read, write, and verify
-+  *buffer functions.
-+ */
-+static void
-+tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+	struct tmio_nand		*tmio	= mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+
-+	iowrite16_rep(&fcr->u16, buf, len >> 1);
-+}
-+
-+static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+	struct tmio_nand		*tmio	= mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+
-+	ioread16_rep(&fcr->u16, buf, len >> 1);
-+}
-+
-+static int
-+tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+	struct tmio_nand		*tmio	= mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+	u16				*p	= (u16 *) buf;
-+
-+	for (len >>= 1; len; len--)
-+		if (*(p++) != ioread16(&fcr->u16))
-+			return -EFAULT;
-+	return 0;
-+}
-+
-+static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+	struct tmio_nand		*tmio	= mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+
-+	iowrite8(FCR_MODE_HWECC_RESET, &fcr->mode);
-+	ioread8(&fcr->u8);	/* dummy read */
-+	iowrite8(FCR_MODE_HWECC_CALC, &fcr->mode);
-+}
-+
-+static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
-+							u_char *ecc_code)
-+{
-+	struct tmio_nand		*tmio	= mtd_to_tmio(mtd);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+	unsigned int			ecc;
-+
-+	iowrite8(FCR_MODE_HWECC_RESULT, &fcr->mode);
-+
-+	ecc = ioread16(&fcr->u16);
-+	ecc_code[1] = ecc;	/* 000-255 LP7-0 */
-+	ecc_code[0] = ecc >> 8;	/* 000-255 LP15-8 */
-+	ecc = ioread16(&fcr->u16);
-+	ecc_code[2] = ecc;	/* 000-255 CP5-0,11b */
-+	ecc_code[4] = ecc >> 8;	/* 256-511 LP7-0 */
-+	ecc = ioread16(&fcr->u16);
-+	ecc_code[3] = ecc;	/* 256-511 LP15-8 */
-+	ecc_code[5] = ecc >> 8;	/* 256-511 CP5-0,11b */
-+
-+	iowrite8(FCR_MODE_DATA, &fcr->mode);
-+	return 0;
-+}
-+
-+static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	const struct resource		*nfcr	= NULL;
-+	struct tmio_nfhccr __iomem 	*ccr	= tmio->ccr;
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+	unsigned long			base;
-+	int				i;
-+
-+	for (i = 0; i < cell->num_resources; i++)
-+		if (!strcmp((cell->resources+i)->name, TMIO_NAND_CONTROL))
-+			nfcr = &cell->resources[i];
-+
-+	if (nfcr == NULL)
-+		return -ENOMEM;
-+
-+	if (!cell->enable) {
-+		printk(KERN_ERR "null cell enable!");
-+		return -EINVAL;
-+	}
-+
-+	cell->enable(dev);
-+
-+	/* (4Ch) CLKRUN Enable    1st spcrunc */
-+	iowrite8(0x81,			&ccr->icc);
-+
-+	/* (10h)BaseAddress    0x1000 spba.spba2 */
-+	base = nfcr->start;
-+	iowrite16(base,			ccr->base + 0);
-+	iowrite16(base >> 16,		ccr->base + 1);
-+
-+	/* (04h)Command Register I/O spcmd */
-+	iowrite8(0x02,			&ccr->command);
-+
-+	/* (62h) Power Supply Control ssmpwc */
-+	/* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */
-+	iowrite8(0x02,			&ccr->nfpsc);
-+
-+	/* (63h) Detect Control ssmdtc */
-+	iowrite8(0x02,			&ccr->nfdc);
-+
-+	/* Interrupt status register clear sintst */
-+	iowrite8(0x0f,			&fcr->isr);
-+
-+	/* After power supply, Media are reset smode */
-+	iowrite8(FCR_MODE_POWER_ON,	&fcr->mode);
-+	iowrite8(FCR_MODE_COMMAND,	&fcr->mode);
-+	iowrite8(NAND_CMD_RESET,	&fcr->u8);
-+
-+	/* Standby Mode smode */
-+	iowrite8(FCR_MODE_STANDBY,	&fcr->mode);
-+
-+	mdelay(5);
-+
-+	return 0;
-+}
-+
-+static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct tmio_nfcr __iomem 	*fcr	= tmio->fcr;
-+
-+	iowrite8(FCR_MODE_POWER_OFF,	&fcr->mode);
-+	cell->disable(dev);
-+}
-+
-+static int tmio_probe(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct tmio_nand_data		*data	= cell->driver_data;
-+	struct resource			*ccr	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_NAND_CONFIG);
-+	struct resource			*fcr	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_NAND_CONTROL);
-+	int				irq	= platform_get_irq(dev, 0);
-+	struct tmio_nand		*tmio;
-+	struct mtd_info			*mtd;
-+	struct nand_chip		*nand_chip;
-+	struct mtd_partition		*parts;
-+	int				nbparts = 0;
-+	int				retval;
-+
-+	if (data == NULL) {
-+		dev_err(&dev->dev, "NULL platform data!\n");
-+		return -EINVAL;
-+	}
-+
-+	tmio = kzalloc(sizeof *tmio, GFP_KERNEL);
-+	if (!tmio) {
-+		retval = -ENOMEM;
-+		goto err_kzalloc;
-+	}
-+
-+	tmio->dev	= dev;
-+
-+	platform_set_drvdata(dev, tmio);
-+	mtd		= &tmio->mtd;
-+	nand_chip	= &tmio->chip;
-+	mtd->priv	= nand_chip;
-+	mtd->name	= "tmio-nand";
-+
-+	tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1);
-+	if (!tmio->ccr) {
-+		retval = -EIO;
-+		goto err_iomap_ccr;
-+	}
-+
-+	tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
-+	if (!tmio->fcr) {
-+		retval = -EIO;
-+		goto err_iomap_fcr;
-+	}
-+
-+	retval = tmio_hw_init(dev, tmio);
-+	if (retval)
-+		goto err_hwinit;
-+
-+	/* Set address of NAND IO lines */
-+	nand_chip->IO_ADDR_R		= tmio->fcr;
-+	nand_chip->IO_ADDR_W		= tmio->fcr;
-+
-+	/* Set address of hardware control function */
-+	nand_chip->cmd_ctrl		= tmio_nand_hwcontrol;
-+	nand_chip->dev_ready		= tmio_nand_dev_ready;
-+	nand_chip->read_byte		= tmio_nand_read_byte;
-+	nand_chip->write_buf		= tmio_nand_write_buf;
-+	nand_chip->read_buf		= tmio_nand_read_buf;
-+	nand_chip->verify_buf		= tmio_nand_verify_buf;
-+
-+	/* set eccmode using hardware ECC */
-+	nand_chip->ecc.mode		= NAND_ECC_HW;
-+	nand_chip->ecc.size 		= 512;
-+	nand_chip->ecc.bytes 		= 6;
-+	nand_chip->ecc.hwctl		= tmio_nand_enable_hwecc;
-+	nand_chip->ecc.calculate	= tmio_nand_calculate_ecc;
-+	nand_chip->ecc.correct		= nand_correct_data;
-+	nand_chip->badblock_pattern	= data->badblock_pattern;
-+
-+	/* 15 us command delay time */
-+	nand_chip->chip_delay	= 15;
-+
-+	retval = request_irq(irq, &tmio_irq,
-+				IRQF_DISABLED, dev->dev.bus_id, dev);
-+	if (retval) {
-+		dev_err(&dev->dev, "request_irq error %d\n", retval);
-+		goto err_irq;
-+	}
-+
-+	tmio->irq		= irq;
-+	nand_chip->waitfunc	= tmio_nand_wait;
-+
-+	/* Scan to find existence of the device */
-+	if (nand_scan(mtd, 1)) {
-+		retval = -ENODEV;
-+		goto err_scan;
-+	}
-+	/* Register the partitions */
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+	nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-+#endif
-+	if (nbparts <= 0) {
-+		parts	= data->partition;
-+		nbparts	= data->num_partitions;
-+	}
-+
-+	retval = add_mtd_partitions(mtd, parts, nbparts);
-+#else
-+	retval = add_mtd_device(mtd);
-+#endif
-+
-+	if (!retval)
-+		return retval;
-+
-+	nand_release(mtd);
-+
-+err_scan:
-+	if (tmio->irq)
-+		free_irq(tmio->irq, dev);
-+err_irq:
-+	tmio_hw_stop(dev, tmio);
-+err_hwinit:
-+	iounmap(tmio->fcr);
-+err_iomap_fcr:
-+	iounmap(tmio->ccr);
-+err_iomap_ccr:
-+	kfree(tmio);
-+err_kzalloc:
-+	return retval;
-+}
-+
-+static int tmio_remove(struct platform_device *dev)
-+{
-+	struct tmio_nand		*tmio	= platform_get_drvdata(dev);
-+
-+	nand_release(&tmio->mtd);
-+	if (tmio->irq)
-+		free_irq(tmio->irq, tmio);
-+	tmio_hw_stop(dev, tmio);
-+	iounmap(tmio->fcr);
-+	iounmap(tmio->ccr);
-+	kfree(tmio);
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int tmio_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+
-+	if (cell->suspend)
-+		cell->suspend(dev);
-+
-+	tmio_hw_stop(dev, platform_get_drvdata(dev));
-+	return 0;
-+}
-+
-+static int tmio_resume(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+
-+	tmio_hw_init(dev, platform_get_drvdata(dev));
-+
-+	if (cell->resume)
-+		cell->resume(dev);
-+
-+	return 0;
-+}
-+#endif
-+
-+static struct platform_driver tmio_driver = {
-+	.driver.name	= "tmio-nand",
-+	.driver.owner	= THIS_MODULE,
-+	.probe		= tmio_probe,
-+	.remove		= tmio_remove,
-+#ifdef CONFIG_PM
-+	.suspend	= tmio_suspend,
-+	.resume		= tmio_resume,
-+#endif
-+};
-+
-+static int __init tmio_init(void)
-+{
-+	return platform_driver_register(&tmio_driver);
-+}
-+
-+static void __exit tmio_exit(void)
-+{
-+	platform_driver_unregister(&tmio_driver);
-+}
-+
-+module_init(tmio_init);
-+module_exit(tmio_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Dirk Opfer, Chris Humbert, Dmitry Baryshkov");
-+MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0009-FB-driver-for-TMIO-devices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0009-FB-driver-for-TMIO-devices.patch
deleted file mode 100644
index 5fc96f8973..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0009-FB-driver-for-TMIO-devices.patch
+++ /dev/null
@@ -1,1128 +0,0 @@
-From 519d015892ab0a7cad1f6b26fcd38117171384ce Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Tue, 1 Jan 2008 21:22:23 +0000
-Subject: [PATCH 09/64] FB driver for TMIO devices
-
----
- drivers/video/Kconfig  |   22 +
- drivers/video/Makefile |    1 +
- drivers/video/tmiofb.c | 1062 ++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 1085 insertions(+), 0 deletions(-)
- create mode 100644 drivers/video/tmiofb.c
-
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 5b3dbcf..6d0df58 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -1782,6 +1782,28 @@ config FB_W100
- 
- 	  If unsure, say N.
- 
-+config FB_TMIO
-+	tristate "Toshiba Mobice IO FrameBuffer support"
-+	depends on FB && MFD_CORE
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Frame buffer driver for the Toshiba Mobile IO integrated as found
-+	  on the Sharp SL-6000 series
-+
-+	  This driver is also available as a module ( = code which can be
-+	  inserted and removed from the running kernel whenever you want). The
-+	  module will be called tmiofb. If you want to compile it as a module,
-+	  say M here and read <file:Documentation/kbuild/modules.txt>.
-+
-+	  If unsure, say N.
-+
-+config FB_TMIO_ACCELL
-+	bool "tmiofb acceleration"
-+	depends on FB_TMIO
-+	default y
-+
- config FB_S3C2410
- 	tristate "S3C2410 LCD framebuffer support"
- 	depends on FB && ARCH_S3C2410
-diff --git a/drivers/video/Makefile b/drivers/video/Makefile
-index 83e02b3..74e9384 100644
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -97,6 +97,7 @@ obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
- obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
- obj-$(CONFIG_FB_PXA)		  += pxafb.o
- obj-$(CONFIG_FB_W100)		  += w100fb.o
-+obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
- obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
- obj-$(CONFIG_FB_AU1200)		  += au1200fb.o
- obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
-diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
-new file mode 100644
-index 0000000..6b963a1
---- /dev/null
-+++ b/drivers/video/tmiofb.c
-@@ -0,0 +1,1062 @@
-+/*
-+ * Frame Buffer Device for Toshiba Mobile IO(TMIO) controller
-+ *
-+ * Copyright(C) 2005-2006 Chris Humbert
-+ * Copyright(C) 2005 Dirk Opfer
-+ *
-+ * Based on:
-+ *	drivers/video/w100fb.c
-+ *	code written by Sharp/Lineo for 2.4 kernels
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+#include <linux/fb.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+/* Why should fb driver call console functions? because acquire_console_sem() */
-+#include <linux/console.h>
-+#include <linux/uaccess.h>
-+#include <linux/vmalloc.h>
-+
-+/*
-+ * accelerator commands
-+ */
-+#define TMIOFB_ACC_CSADR(x)	(0x00000000 | ((x) & 0x001ffffe))
-+#define TMIOFB_ACC_CHPIX(x)	(0x01000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_CVPIX(x)	(0x02000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_PSADR(x)	(0x03000000 | ((x) & 0x00fffffe))
-+#define TMIOFB_ACC_PHPIX(x)	(0x04000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_PVPIX(x)	(0x05000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_PHOFS(x)	(0x06000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_PVOFS(x)	(0x07000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_POADR(x)	(0x08000000 | ((x) & 0x00fffffe))
-+#define TMIOFB_ACC_RSTR(x)	(0x09000000 | ((x) & 0x000000ff))
-+#define TMIOFB_ACC_TCLOR(x)	(0x0A000000 | ((x) & 0x0000ffff))
-+#define TMIOFB_ACC_FILL(x)	(0x0B000000 | ((x) & 0x0000ffff))
-+#define TMIOFB_ACC_DSADR(x)	(0x0C000000 | ((x) & 0x00fffffe))
-+#define TMIOFB_ACC_SSADR(x)	(0x0D000000 | ((x) & 0x00fffffe))
-+#define TMIOFB_ACC_DHPIX(x)	(0x0E000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_DVPIX(x)	(0x0F000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_SHPIX(x)	(0x10000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_SVPIX(x)	(0x11000000 | ((x) & 0x000003ff))
-+#define TMIOFB_ACC_LBINI(x)	(0x12000000 | ((x) & 0x0000ffff))
-+#define TMIOFB_ACC_LBK2(x)	(0x13000000 | ((x) & 0x0000ffff))
-+#define TMIOFB_ACC_SHBINI(x)	(0x14000000 | ((x) & 0x0000ffff))
-+#define TMIOFB_ACC_SHBK2(x)	(0x15000000 | ((x) & 0x0000ffff))
-+#define TMIOFB_ACC_SVBINI(x)	(0x16000000 | ((x) & 0x0000ffff))
-+#define TMIOFB_ACC_SVBK2(x)	(0x17000000 | ((x) & 0x0000ffff))
-+
-+#define	TMIOFB_ACC_CMGO		0x20000000
-+#define	TMIOFB_ACC_CMGO_CEND	0x00000001
-+#define	TMIOFB_ACC_CMGO_INT	0x00000002
-+#define	TMIOFB_ACC_CMGO_CMOD	0x00000010
-+#define	TMIOFB_ACC_CMGO_CDVRV	0x00000020
-+#define	TMIOFB_ACC_CMGO_CDHRV	0x00000040
-+#define	TMIOFB_ACC_CMGO_RUND	0x00008000
-+#define	TMIOFB_ACC_SCGO		0x21000000
-+#define	TMIOFB_ACC_SCGO_CEND	0x00000001
-+#define	TMIOFB_ACC_SCGO_INT	0x00000002
-+#define	TMIOFB_ACC_SCGO_ROP3	0x00000004
-+#define	TMIOFB_ACC_SCGO_TRNS	0x00000008
-+#define	TMIOFB_ACC_SCGO_DVRV	0x00000010
-+#define	TMIOFB_ACC_SCGO_DHRV	0x00000020
-+#define	TMIOFB_ACC_SCGO_SVRV	0x00000040
-+#define	TMIOFB_ACC_SCGO_SHRV	0x00000080
-+#define	TMIOFB_ACC_SCGO_DSTXY	0x00008000
-+#define	TMIOFB_ACC_SBGO		0x22000000
-+#define	TMIOFB_ACC_SBGO_CEND	0x00000001
-+#define	TMIOFB_ACC_SBGO_INT	0x00000002
-+#define	TMIOFB_ACC_SBGO_DVRV	0x00000010
-+#define	TMIOFB_ACC_SBGO_DHRV	0x00000020
-+#define	TMIOFB_ACC_SBGO_SVRV	0x00000040
-+#define	TMIOFB_ACC_SBGO_SHRV	0x00000080
-+#define	TMIOFB_ACC_SBGO_SBMD	0x00000100
-+#define	TMIOFB_ACC_FLGO		0x23000000
-+#define	TMIOFB_ACC_FLGO_CEND	0x00000001
-+#define	TMIOFB_ACC_FLGO_INT	0x00000002
-+#define	TMIOFB_ACC_FLGO_ROP3	0x00000004
-+#define	TMIOFB_ACC_LDGO		0x24000000
-+#define	TMIOFB_ACC_LDGO_CEND	0x00000001
-+#define	TMIOFB_ACC_LDGO_INT	0x00000002
-+#define	TMIOFB_ACC_LDGO_ROP3	0x00000004
-+#define	TMIOFB_ACC_LDGO_ENDPX	0x00000008
-+#define	TMIOFB_ACC_LDGO_LVRV	0x00000010
-+#define	TMIOFB_ACC_LDGO_LHRV	0x00000020
-+#define	TMIOFB_ACC_LDGO_LDMOD	0x00000040
-+
-+/* a FIFO is always allocated, even if acceleration is not used */
-+#define TMIOFB_FIFO_SIZE	512
-+
-+/*
-+ * LCD Host Controller Configuration Register
-+ *
-+ * This iomem area supports only 16-bit IO.
-+ */
-+struct tmio_lhccr {
-+	u16 x00[2];
-+	u16	cmd;		/* 0x04 Command				*/
-+	u16 x01;
-+	u16	revid;		/* 0x08 Revision ID			*/
-+	u16 x02[3];
-+	u16	basel;		/* 0x10 LCD Control Reg Base Addr Low	*/
-+	u16	baseh;		/* 0x12 LCD Control Reg Base Addr High	*/
-+	u16 x03[0x16];
-+	u16	ugcc;		/* 0x40 Unified Gated Clock Control	*/
-+	u16	gcc;		/* 0x42 Gated Clock Control		*/
-+	u16 x04[6];
-+	u16	usc;		/* 0x50 Unified Software Clear		*/
-+	u16 x05[7];
-+	u16	vramrtc;	/* 0x60 VRAM Timing Control		*/
-+				/* 0x61 VRAM Refresh Control		*/
-+	u16	vramsac;	/* 0x62 VRAM Access Control		*/
-+				/* 0x63	VRAM Status			*/
-+	u16	vrambc;		/* 0x64 VRAM Block Control		*/
-+	u16 x06[0x4d];
-+};
-+
-+/*
-+ * LCD Control Register
-+ *
-+ * This iomem area supports only 16-bit IO.
-+ */
-+struct tmio_lcr {
-+	u16	uis;	/* 0x000 Unified Interrupt Status		*/
-+	u16 x00[3];
-+	u16	vhpn;	/* 0x008 VRAM Horizontal Pixel Number		*/
-+	u16	cfsal;	/* 0x00a Command FIFO Start Address Low		*/
-+	u16	cfsah;	/* 0x00c Command FIFO Start Address High	*/
-+	u16	cfs;	/* 0x00e Command FIFO Size			*/
-+	u16	cfws;	/* 0x010 Command FIFO Writeable Size		*/
-+	u16	bbie;	/* 0x012 BitBLT Interrupt Enable		*/
-+	u16	bbisc;	/* 0x014 BitBLT Interrupt Status and Clear	*/
-+	u16	ccs;	/* 0x016 Command Count Status			*/
-+	u16	bbes;	/* 0x018 BitBLT Execution Status		*/
-+	u16 x01;
-+	u16	cmdl;	/* 0x01c Command Low				*/
-+	u16	cmdh;	/* 0x01e Command High				*/
-+	u16 x02;
-+	u16	cfc;	/* 0x022 Command FIFO Clear			*/
-+	u16	ccifc;	/* 0x024 CMOS Camera IF Control			*/
-+	u16	hwt;	/* 0x026 Hardware Test				*/
-+	u16 x03[0x6c];
-+	u16	lcdccrc;/* 0x100 LCDC Clock and Reset Control		*/
-+	u16	lcdcc;	/* 0x102 LCDC Control				*/
-+	u16	lcdcopc;/* 0x104 LCDC Output Pin Control		*/
-+	u16 x04;
-+	u16	lcdis;	/* 0x108 LCD Interrupt Status			*/
-+	u16	lcdim;	/* 0x10a LCD Interrupt Mask			*/
-+	u16	lcdie;	/* 0x10c LCD Interrupt Enable			*/
-+	u16 x05[10];
-+	u16	gdsal;	/* 0x122 Graphics Display Start Address Low	*/
-+	u16	gdsah;	/* 0x124 Graphics Display Start Address High	*/
-+	u16 x06[2];
-+	u16	vhpcl;	/* 0x12a VRAM Horizontal Pixel Count Low	*/
-+	u16	vhpch;	/* 0x12c VRAM Horizontal Pixel Count High	*/
-+	u16	gm;	/* 0x12e Graphic Mode(VRAM access enable)	*/
-+	u16 x07[8];
-+	u16	ht;	/* 0x140 Horizontal Total			*/
-+	u16	hds;	/* 0x142 Horizontal Display Start		*/
-+	u16	hss;	/* 0x144 H-Sync Start				*/
-+	u16	hse;	/* 0x146 H-Sync End				*/
-+	u16 x08[2];
-+	u16	hnp;	/* 0x14c Horizontal Number of Pixels		*/
-+	u16 x09;
-+	u16	vt;	/* 0x150 Vertical Total				*/
-+	u16	vds;	/* 0x152 Vertical Display Start			*/
-+	u16	vss;	/* 0x154 V-Sync Start				*/
-+	u16	vse;	/* 0x156 V-Sync End				*/
-+	u16 x0a[4];
-+	u16	cdln;	/* 0x160 Current Display Line Number		*/
-+	u16	iln;	/* 0x162 Interrupt Line Number			*/
-+	u16	sp;	/* 0x164 Sync Polarity				*/
-+	u16	misc;	/* 0x166 MISC(RGB565 mode)			*/
-+	u16 x0b;
-+	u16	vihss;	/* 0x16a Video Interface H-Sync Start		*/
-+	u16	vivs;	/* 0x16c Video Interface Vertical Start		*/
-+	u16	vive;	/* 0x16e Video Interface Vertical End		*/
-+	u16	vivss;	/* 0x170 Video Interface V-Sync Start		*/
-+	u16 x0c[6];
-+	u16	vccis;	/* 0x17e Video / CMOS Camera Interface Select	*/
-+	u16	vidwsal;/* 0x180 VI Data Write Start Address Low	*/
-+	u16	vidwsah;/* 0x182 VI Data Write Start Address High	*/
-+	u16	vidrsal;/* 0x184 VI Data Read Start Address Low		*/
-+	u16	vidrsah;/* 0x186 VI Data Read Start Address High	*/
-+	u16	vipddst;/* 0x188 VI Picture Data Display Start Timing	*/
-+	u16	vipddet;/* 0x186 VI Picture Data Display End Timing	*/
-+	u16	vie;	/* 0x18c Video Interface Enable			*/
-+	u16	vcs;	/* 0x18e Video/Camera Select			*/
-+	u16 x0d[2];
-+	u16	vphwc;	/* 0x194 Video Picture Horizontal Wait Count	*/
-+	u16	vphs;	/* 0x196 Video Picture Horizontal Size		*/
-+	u16	vpvwc;	/* 0x198 Video Picture Vertical Wait Count	*/
-+	u16	vpvs;	/* 0x19a Video Picture Vertical Size		*/
-+	u16 x0e[2];
-+	u16	plhpix;	/* 0x1a0 PLHPIX					*/
-+	u16	xs;	/* 0x1a2 XStart					*/
-+	u16	xckhw;	/* 0x1a4 XCK High Width				*/
-+	u16 x0f;
-+	u16	sths;	/* 0x1a8 STH Start				*/
-+	u16	vt2;	/* 0x1aa Vertical Total				*/
-+	u16	ycksw;	/* 0x1ac YCK Start Wait				*/
-+	u16	ysts;	/* 0x1ae YST Start				*/
-+	u16	ppols;	/* 0x1b0 #PPOL Start				*/
-+	u16	precw;	/* 0x1b2 PREC Width				*/
-+	u16	vclkhw;	/* 0x1b4 VCLK High Width			*/
-+	u16	oc;	/* 0x1b6 Output Control				*/
-+	u16 x10[0x24];
-+};
-+static char *mode_option __devinitdata;
-+
-+struct tmiofb_par {
-+	u32				pseudo_palette[16];
-+
-+#ifdef CONFIG_FB_TMIO_ACCELL
-+	wait_queue_head_t		wait_acc;
-+	bool				use_polling;
-+#endif
-+
-+	struct tmio_lhccr __iomem	*ccr;
-+	struct tmio_lcr __iomem		*lcr;
-+	void __iomem			*vram;
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+static irqreturn_t tmiofb_irq(int irq, void *__info);
-+
-+/*--------------------------------------------------------------------------*/
-+
-+
-+/*
-+ * Turns off the LCD controller and LCD host controller.
-+ */
-+static int tmiofb_hw_stop(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct tmio_fb_data		*data	= cell->driver_data;
-+	struct fb_info			*info	= platform_get_drvdata(dev);
-+	struct tmiofb_par		*par	= info->par;
-+	struct tmio_lhccr __iomem 	*ccr	= par->ccr;
-+	struct tmio_lcr __iomem 	*lcr	= par->lcr;
-+
-+	iowrite16(0,		&ccr->ugcc);
-+	iowrite16(0,		&lcr->gm);
-+	data->lcd_set_power(dev, 0);
-+	iowrite16(0x0010,	&lcr->lcdccrc);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Initializes the LCD host controller.
-+ */
-+static int tmiofb_hw_init(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct tmio_fb_data		*data	= cell->driver_data;
-+	struct fb_info			*info	= platform_get_drvdata(dev);
-+	struct tmiofb_par		*par	= info->par;
-+	struct tmio_lhccr __iomem 	*ccr	= par->ccr;
-+	struct tmio_lcr __iomem 	*lcr	= par->lcr;
-+	const struct resource		*nlcr	= NULL;
-+	const struct resource		*vram	= NULL;
-+	unsigned long			base;
-+	int				i;
-+
-+	for (i = 0; i < cell->num_resources; i++) {
-+		if (!strcmp((cell->resources+i)->name, TMIO_FB_CONTROL))
-+			nlcr = &cell->resources[i];
-+		if (!strcmp((cell->resources+i)->name, TMIO_FB_VRAM))
-+			vram = &cell->resources[i];
-+	}
-+
-+	if (nlcr == NULL || vram == NULL)
-+		return -EINVAL;
-+
-+	base = nlcr->start;
-+
-+	if (info->mode == NULL) {
-+		printk(KERN_ERR "tmio-fb: null info->mode\n");
-+		info->mode = data->modes;
-+	}
-+
-+	data->lcd_mode(dev, info->mode);
-+
-+	iowrite16(0x003a,	&ccr->ugcc);
-+	iowrite16(0x003a,	&ccr->gcc);
-+	iowrite16(0x3f00,	&ccr->usc);
-+
-+	data->lcd_set_power(dev, 1);
-+	mdelay(2);
-+
-+	iowrite16(0x0000,	&ccr->usc);
-+	iowrite16(base >> 16,	&ccr->baseh);
-+	iowrite16(base,	&ccr->basel);
-+	iowrite16(0x0002,	&ccr->cmd);	/* base address enable	*/
-+	iowrite16(0x40a8,	&ccr->vramrtc);	/* VRAMRC, VRAMTC	*/
-+	iowrite16(0x0018,	&ccr->vramsac);	/* VRAMSTS, VRAMAC	*/
-+	iowrite16(0x0002,	&ccr->vrambc);
-+	mdelay(2);
-+	iowrite16(0x000b,	&ccr->vrambc);
-+
-+	base = vram->start + info->screen_size;
-+	iowrite16(base >> 16,			&lcr->cfsah);
-+	iowrite16(base,				&lcr->cfsal);
-+	iowrite16(TMIOFB_FIFO_SIZE - 1,		&lcr->cfs);
-+	iowrite16(1,				&lcr->cfc);
-+	iowrite16(1,				&lcr->bbie);
-+	iowrite16(0,				&lcr->cfws);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Sets the LCD controller's output resolution and pixel clock
-+ */
-+static void tmiofb_hw_mode(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct tmio_fb_data		*data	= cell->driver_data;
-+	struct fb_info			*info	= platform_get_drvdata(dev);
-+	struct fb_videomode		*mode	= info->mode;
-+	struct tmiofb_par		*par	= info->par;
-+	struct tmio_lcr __iomem 	*lcr	= par->lcr;
-+	unsigned int			i;
-+
-+	iowrite16(0,				&lcr->gm);
-+	data->lcd_set_power(dev, 0);
-+	iowrite16(0x0010,			&lcr->lcdccrc);
-+	data->lcd_mode(dev, mode);
-+	data->lcd_set_power(dev, 1);
-+
-+	iowrite16(i = mode->xres * 2,		&lcr->vhpn);
-+	iowrite16(0,				&lcr->gdsah);
-+	iowrite16(0,				&lcr->gdsal);
-+	iowrite16(i >> 16,			&lcr->vhpch);
-+	iowrite16(i,				&lcr->vhpcl);
-+	iowrite16(i = 0,			&lcr->hss);
-+	iowrite16(i += mode->hsync_len,	&lcr->hse);
-+	iowrite16(i += mode->left_margin,	&lcr->hds);
-+	iowrite16(i += mode->xres + mode->right_margin,	&lcr->ht);
-+	iowrite16(mode->xres,			&lcr->hnp);
-+	iowrite16(i = 0,			&lcr->vss);
-+	iowrite16(i += mode->vsync_len,	&lcr->vse);
-+	iowrite16(i += mode->upper_margin,	&lcr->vds);
-+	iowrite16(i += mode->yres,		&lcr->iln);
-+	iowrite16(i += mode->lower_margin,	&lcr->vt);
-+	iowrite16(3,	/* RGB565 mode */	&lcr->misc);
-+	iowrite16(1,	/* VRAM enable */	&lcr->gm);
-+	iowrite16(0x4007,			&lcr->lcdcc);
-+	iowrite16(3,	 /* sync polarity */	&lcr->sp);
-+
-+	iowrite16(0x0010,	&lcr->lcdccrc);
-+	mdelay(5);
-+	iowrite16(0x0014,	&lcr->lcdccrc);	/* STOP_CKP */
-+	mdelay(5);
-+	iowrite16(0x0015,	&lcr->lcdccrc);	/* STOP_CKP | SOFT_RESET */
-+	iowrite16(0xfffa,	&lcr->vcs);
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+#ifdef CONFIG_FB_TMIO_ACCELL
-+static int __must_check
-+tmiofb_acc_wait(struct fb_info *info, unsigned int ccs)
-+{
-+	struct tmiofb_par		*par	= info->par;
-+	struct tmio_lcr __iomem		*lcr	= par->lcr;
-+	if (in_atomic() || par->use_polling) {
-+		int i = 0;
-+		while (ioread16(&lcr->ccs) > ccs) {
-+			udelay(1);
-+			i++;
-+			if (i > 10000) {
-+				printk(KERN_ERR "tmiofb: timeout waiting for %d\n", ccs);
-+				return -ETIMEDOUT;
-+			}
-+			tmiofb_irq(-1, info);
-+		}
-+	} else {
-+		if (!wait_event_interruptible_timeout(par->wait_acc,
-+				ioread16(&par->lcr->ccs) <= ccs, 1000)) {
-+			printk(KERN_ERR "tmiofb: timeout waiting for %d\n", ccs);
-+			return -ETIMEDOUT;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Writes an accelerator command to the accelerator's FIFO.
-+ */
-+static int
-+tmiofb_acc_write(struct fb_info *info, const u32 *cmd, unsigned int count)
-+{
-+	struct tmiofb_par		*par	= info->par;
-+	struct tmio_lcr __iomem		*lcr	= par->lcr;
-+	int ret;
-+
-+	ret = tmiofb_acc_wait(info, TMIOFB_FIFO_SIZE - count);
-+	if (ret)
-+		return ret;
-+
-+	for (; count; count--, cmd++) {
-+		iowrite16(*cmd >> 16,	&lcr->cmdh);
-+		iowrite16(*cmd,	&lcr->cmdl);
-+	}
-+
-+	return ret;
-+}
-+
-+/*
-+ * Wait for the accelerator to finish its operations before writing
-+ * to the framebuffer for consistent display output.
-+ */
-+static int tmiofb_sync(struct fb_info *fbi)
-+{
-+	struct tmiofb_par		*par	= fbi->par;
-+
-+	int ret;
-+	int i = 0;
-+
-+	ret = tmiofb_acc_wait(fbi, 0);
-+
-+	while (ioread16(&par->lcr->bbes) & 2) {	/* blit active */
-+		udelay(1);
-+		i++ ;
-+		if (i > 10000) {
-+			printk(KERN_ERR "timeout waiting for blit to end!\n");
-+			return -ETIMEDOUT;
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+static void
-+tmiofb_fillrect(struct fb_info *fbi, const struct fb_fillrect *rect)
-+{
-+	const u32 cmd [] = {
-+		TMIOFB_ACC_DSADR((rect->dy * fbi->mode->xres + rect->dx) * 2),
-+		TMIOFB_ACC_DHPIX(rect->width	- 1),
-+		TMIOFB_ACC_DVPIX(rect->height	- 1),
-+		TMIOFB_ACC_FILL(rect->color),
-+		TMIOFB_ACC_FLGO,
-+	};
-+
-+	if (fbi->state != FBINFO_STATE_RUNNING ||
-+	    fbi->flags & FBINFO_HWACCEL_DISABLED) {
-+		cfb_fillrect(fbi, rect);
-+		return;
-+	}
-+
-+	tmiofb_acc_write(fbi, cmd, ARRAY_SIZE(cmd));
-+}
-+
-+static void
-+tmiofb_copyarea(struct fb_info *fbi, const struct fb_copyarea *area)
-+{
-+	const u32 cmd [] = {
-+		TMIOFB_ACC_DSADR((area->dy * fbi->mode->xres + area->dx) * 2),
-+		TMIOFB_ACC_DHPIX(area->width	- 1),
-+		TMIOFB_ACC_DVPIX(area->height	- 1),
-+		TMIOFB_ACC_SSADR((area->sy * fbi->mode->xres + area->sx) * 2),
-+		TMIOFB_ACC_SCGO,
-+	};
-+
-+	if (fbi->state != FBINFO_STATE_RUNNING ||
-+	    fbi->flags & FBINFO_HWACCEL_DISABLED) {
-+		cfb_copyarea(fbi, area);
-+		return;
-+	}
-+
-+	tmiofb_acc_write(fbi, cmd, ARRAY_SIZE(cmd));
-+}
-+#endif
-+
-+static void tmiofb_clearscreen(struct fb_info *info)
-+{
-+	const struct fb_fillrect rect = {
-+		.dx	= 0,
-+		.dy	= 0,
-+		.width	= info->mode->xres,
-+		.height	= info->mode->yres,
-+		.color	= 0,
-+	};
-+
-+	info->fbops->fb_fillrect(info, &rect);
-+}
-+
-+static int tmiofb_vblank(struct fb_info *fbi, struct fb_vblank *vblank)
-+{
-+	struct tmiofb_par	*par	= fbi->par;
-+	struct fb_videomode	*mode	= fbi->mode;
-+	unsigned int		vcount	= ioread16(&par->lcr->cdln);
-+	unsigned int		vds	= mode->vsync_len + mode->upper_margin;
-+
-+	vblank->vcount	= vcount;
-+	vblank->flags	= FB_VBLANK_HAVE_VBLANK	| FB_VBLANK_HAVE_VCOUNT
-+						| FB_VBLANK_HAVE_VSYNC;
-+
-+	if (vcount < mode->vsync_len)
-+		vblank->flags |= FB_VBLANK_VSYNCING;
-+
-+	if (vcount < vds || vcount > vds + mode->yres)
-+		vblank->flags |= FB_VBLANK_VBLANKING;
-+
-+	return 0;
-+}
-+
-+
-+static int tmiofb_ioctl(struct fb_info *fbi,
-+		unsigned int cmd, unsigned long arg)
-+{
-+	switch (cmd) {
-+	case FBIOGET_VBLANK: {
-+		struct fb_vblank	vblank	= {0};
-+		void __user		*argp	= (void __user *) arg;
-+
-+		tmiofb_vblank(fbi, &vblank);
-+		if (copy_to_user(argp, &vblank, sizeof vblank))
-+				return -EFAULT;
-+		return 0;
-+	}
-+
-+#ifdef CONFIG_FB_TMIO_ACCELL
-+	case FBIO_TMIO_ACC_SYNC:
-+		tmiofb_sync(fbi);
-+		return 0;
-+
-+	case FBIO_TMIO_ACC_WRITE: {
-+		u32 __user	*argp	= (void __user *) arg;
-+		u32		len;
-+		u32		acc [16];
-+
-+		if (copy_from_user(&len, argp, sizeof(u32)))
-+			return -EFAULT;
-+		if (len > ARRAY_SIZE(acc))
-+			return -EINVAL;
-+		if (copy_from_user(acc, argp + 1, sizeof(u32) * len))
-+			return -EFAULT;
-+
-+		return tmiofb_acc_write(fbi, acc, len);
-+	}
-+#endif
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* Select the smallest mode that allows the desired resolution to be
-+ * displayed.  If desired, the x and y parameters can be rounded up to
-+ * match the selected mode.
-+ */
-+static struct fb_videomode*
-+tmiofb_find_mode(struct fb_info *info, struct fb_var_screeninfo *var)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(to_platform_device(info->device));
-+	struct tmio_fb_data		*data	= cell->driver_data;
-+	struct fb_videomode		*best	= NULL;
-+	int				i;
-+
-+	for (i = 0; i < data->num_modes; i++) {
-+		struct fb_videomode *mode = data->modes + i;
-+
-+		if (mode->xres >= var->xres && mode->yres >= var->yres
-+				&& (!best || (mode->xres < best->xres
-+					   && mode->yres < best->yres)))
-+			best = mode;
-+	}
-+
-+	return best;
-+}
-+
-+static int tmiofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+
-+	struct fb_videomode	*mode;
-+
-+	mode = tmiofb_find_mode(info, var);
-+	if (!mode || var->bits_per_pixel > 16)
-+		return -EINVAL;
-+
-+	fb_videomode_to_var(var, mode);
-+
-+	var->xres_virtual	= mode->xres;
-+	var->yres_virtual	= info->screen_size / (mode->xres * 2);
-+	var->xoffset		= 0;
-+	var->yoffset		= 0;
-+	var->bits_per_pixel	= 16;
-+	var->grayscale		= 0;
-+	var->red.offset		= 11;	var->red.length		= 5;
-+	var->green.offset	= 5;	var->green.length	= 6;
-+	var->blue.offset	= 0;	var->blue.length	= 5;
-+	var->transp.offset	= 0;	var->transp.length	= 0;
-+	var->nonstd		= 0;
-+	var->height		= 82;	/* mm */
-+	var->width		= 60;	/* mm */
-+	var->rotate		= 0;
-+	return 0;
-+}
-+
-+static int tmiofb_set_par(struct fb_info *info)
-+{
-+/*	struct fb_var_screeninfo	*var	= &info->var;
-+	struct fb_videomode		*mode;
-+
-+	mode = tmiofb_find_mode(info, var);
-+	if (!mode)
-+		return -EINVAL;
-+
-+	if (info->mode == mode)
-+		return 0;
-+
-+	info->mode		= mode; */
-+	info->fix.line_length	= info->mode->xres * 2;
-+
-+	tmiofb_hw_mode(to_platform_device(info->device));
-+	tmiofb_clearscreen(info);
-+	return 0;
-+}
-+
-+static int tmiofb_setcolreg(unsigned regno, unsigned red, unsigned green,
-+			   unsigned blue, unsigned transp,
-+			   struct fb_info *info)
-+{
-+	struct tmiofb_par	*par	= info->par;
-+
-+	if (regno < ARRAY_SIZE(par->pseudo_palette)) {
-+		par->pseudo_palette [regno] =
-+			((red	& 0xf800))		|
-+			((green	& 0xfc00) >>  5)	|
-+			((blue	& 0xf800) >> 11);
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+static struct fb_ops tmiofb_ops = {
-+	.owner		= THIS_MODULE,
-+
-+	.fb_ioctl	= tmiofb_ioctl,
-+	.fb_check_var	= tmiofb_check_var,
-+	.fb_set_par	= tmiofb_set_par,
-+	.fb_setcolreg	= tmiofb_setcolreg,
-+	.fb_imageblit	= cfb_imageblit,
-+#ifdef CONFIG_FB_TMIO_ACCELL
-+	.fb_sync	= tmiofb_sync,
-+	.fb_fillrect	= tmiofb_fillrect,
-+	.fb_copyarea	= tmiofb_copyarea,
-+#else
-+	.fb_fillrect	= cfb_fillrect,
-+	.fb_copyarea	= cfb_copyarea,
-+#endif
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/*
-+ * reasons for an interrupt:
-+ *	uis	bbisc	lcdis
-+ *	0100	0001		accelerator command completed
-+ * 	2000		0001	vsync start
-+ * 	2000		0002	display start
-+ * 	2000		0004	line number match(0x1ff mask???)
-+ */
-+static irqreturn_t tmiofb_irq(int irq, void *__info)
-+{
-+	struct fb_info			*info	= __info;
-+	struct tmiofb_par		*par	= info->par;
-+	struct tmio_lcr __iomem		*lcr	= par->lcr;
-+	unsigned int			bbisc	= ioread16(&lcr->bbisc);
-+
-+
-+	if (unlikely(par->use_polling && irq != -1)) {
-+		printk(KERN_INFO "tmiofb: switching to waitq\n");
-+		par->use_polling = false;
-+	}
-+
-+	iowrite16(bbisc, &lcr->bbisc);
-+
-+#ifdef CONFIG_FB_TMIO_ACCELL
-+	if (bbisc & 1)
-+		wake_up(&par->wait_acc);
-+#endif
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int tmiofb_probe(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct tmio_fb_data		*data	= cell->driver_data;
-+	struct resource			*ccr	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_FB_CONFIG);
-+	struct resource			*lcr	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_FB_CONTROL);
-+	struct resource			*vram	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_FB_VRAM);
-+	int				irq	= platform_get_irq(dev, 0);
-+	struct fb_info			*info;
-+	struct tmiofb_par		*par;
-+	int				retval;
-+
-+	if (data == NULL) {
-+		dev_err(&dev->dev, "NULL platform data!\n");
-+		return -EINVAL;
-+	}
-+
-+	info = framebuffer_alloc(sizeof(struct tmiofb_par), &dev->dev);
-+
-+	if (!info) {
-+		retval = -ENOMEM;
-+		goto err_framebuffer_alloc;
-+	}
-+
-+	par = info->par;
-+	platform_set_drvdata(dev, info);
-+
-+#ifdef CONFIG_FB_TMIO_ACCELL
-+	init_waitqueue_head(&par->wait_acc);
-+
-+	par->use_polling	= true;
-+
-+	info->flags		= FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA
-+						 | FBINFO_HWACCEL_FILLRECT;
-+#else
-+	info->flags		= FBINFO_DEFAULT;
-+#endif
-+
-+	info->fbops		= &tmiofb_ops;
-+
-+	strcpy(info->fix.id, "tmio-fb");
-+	info->fix.smem_start	= vram->start;
-+	info->fix.smem_len	= vram->end - vram->start + 1;
-+	info->fix.type		= FB_TYPE_PACKED_PIXELS;
-+	info->fix.visual	= FB_VISUAL_TRUECOLOR;
-+	info->fix.mmio_start	= lcr->start;
-+	info->fix.mmio_len	= lcr->end - lcr->start + 1;
-+	info->fix.accel		= FB_ACCEL_NONE;
-+	info->screen_size	= info->fix.smem_len - (4 * TMIOFB_FIFO_SIZE);
-+	info->pseudo_palette	= par->pseudo_palette;
-+
-+	par->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1);
-+	if (!par->ccr) {
-+		retval = -ENOMEM;
-+		goto err_ioremap_ccr;
-+	}
-+
-+	par->lcr = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+	if (!par->lcr) {
-+		retval = -ENOMEM;
-+		goto err_ioremap_lcr;
-+	}
-+
-+	par->vram = ioremap(info->fix.smem_start, info->fix.smem_len);
-+	if (!par->vram) {
-+		retval = -ENOMEM;
-+		goto err_ioremap_vram;
-+	}
-+	info->screen_base = par->vram;
-+
-+	retval = request_irq(irq, &tmiofb_irq, IRQF_DISABLED,
-+					dev->dev.bus_id, info);
-+
-+	if (retval)
-+		goto err_request_irq;
-+
-+	retval = fb_find_mode(&info->var, info, mode_option,
-+			data->modes, data->num_modes,
-+			data->modes, 16);
-+	if (!retval) {
-+		retval = -EINVAL;
-+		goto err_find_mode;
-+	}
-+
-+	retval = cell->enable(dev);
-+	if (retval)
-+		goto err_enable;
-+
-+	retval = tmiofb_hw_init(dev);
-+	if (retval)
-+		goto err_hw_init;
-+
-+/*	retval = tmiofb_set_par(info);
-+	if (retval)
-+		goto err_set_par;*/
-+
-+	retval = register_framebuffer(info);
-+	if (retval < 0)
-+		goto err_register_framebuffer;
-+
-+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
-+				info->node, info->fix.id);
-+
-+	return 0;
-+
-+err_register_framebuffer:
-+/*err_set_par:*/
-+	tmiofb_hw_stop(dev);
-+err_hw_init:
-+	cell->disable(dev);
-+err_enable:
-+err_find_mode:
-+	free_irq(irq, info);
-+err_request_irq:
-+	iounmap(par->vram);
-+err_ioremap_vram:
-+	iounmap(par->lcr);
-+err_ioremap_lcr:
-+	iounmap(par->ccr);
-+err_ioremap_ccr:
-+	platform_set_drvdata(dev, NULL);
-+	framebuffer_release(info);
-+err_framebuffer_alloc:
-+	return retval;
-+}
-+
-+static int __devexit tmiofb_remove(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct fb_info			*info	= platform_get_drvdata(dev);
-+	int				irq	= platform_get_irq(dev, 0);
-+	struct tmiofb_par		*par;
-+
-+	if (info) {
-+		par = info->par;
-+		unregister_framebuffer(info);
-+
-+		tmiofb_hw_stop(dev);
-+
-+		cell->disable(dev);
-+
-+		free_irq(irq, info);
-+
-+		iounmap(par->vram);
-+		iounmap(par->lcr);
-+		iounmap(par->ccr);
-+
-+		framebuffer_release(info);
-+		platform_set_drvdata(dev, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+#if 0
-+static void tmiofb_dump_regs(struct platform_device *dev)
-+{
-+	struct fb_info			*info	= platform_get_drvdata(dev);
-+	struct tmiofb_par		*par	= info->par;
-+	struct tmio_lhccr __iomem 	*ccr	= par->ccr;
-+	struct tmio_lcr __iomem 	*lcr	= par->lcr;
-+
-+	printk("lhccr:\n");
-+#define CCR_PR(n)	printk("\t" #n " = \t%04x\n", ioread16(&ccr->n));
-+	CCR_PR(cmd);
-+	CCR_PR(revid);
-+	CCR_PR(basel);
-+	CCR_PR(baseh);
-+	CCR_PR(ugcc);
-+	CCR_PR(gcc);
-+	CCR_PR(usc);
-+	CCR_PR(vramrtc);
-+	CCR_PR(vramsac);
-+	CCR_PR(vrambc);
-+#undef CCR_PR
-+
-+	printk("lcr: \n");
-+#define LCR_PR(n)	printk("\t" #n " = \t%04x\n", ioread16(&lcr->n));
-+	LCR_PR(uis);
-+	LCR_PR(vhpn);
-+	LCR_PR(cfsal);
-+	LCR_PR(cfsah);
-+	LCR_PR(cfs);
-+	LCR_PR(cfws);
-+	LCR_PR(bbie);
-+	LCR_PR(bbisc);
-+	LCR_PR(ccs);
-+	LCR_PR(bbes);
-+	LCR_PR(cmdl);
-+	LCR_PR(cmdh);
-+	LCR_PR(cfc);
-+	LCR_PR(ccifc);
-+	LCR_PR(hwt);
-+	LCR_PR(lcdccrc);
-+	LCR_PR(lcdcc);
-+	LCR_PR(lcdcopc);
-+	LCR_PR(lcdis);
-+	LCR_PR(lcdim);
-+	LCR_PR(lcdie);
-+	LCR_PR(gdsal);
-+	LCR_PR(gdsah);
-+	LCR_PR(vhpcl);
-+	LCR_PR(vhpch);
-+	LCR_PR(gm);
-+	LCR_PR(ht);
-+	LCR_PR(hds);
-+	LCR_PR(hss);
-+	LCR_PR(hse);
-+	LCR_PR(hnp);
-+	LCR_PR(vt);
-+	LCR_PR(vds);
-+	LCR_PR(vss);
-+	LCR_PR(vse);
-+	LCR_PR(cdln);
-+	LCR_PR(iln);
-+	LCR_PR(sp);
-+	LCR_PR(misc);
-+	LCR_PR(vihss);
-+	LCR_PR(vivs);
-+	LCR_PR(vive);
-+	LCR_PR(vivss);
-+	LCR_PR(vccis);
-+	LCR_PR(vidwsal);
-+	LCR_PR(vidwsah);
-+	LCR_PR(vidrsal);
-+	LCR_PR(vidrsah);
-+	LCR_PR(vipddst);
-+	LCR_PR(vipddet);
-+	LCR_PR(vie);
-+	LCR_PR(vcs);
-+	LCR_PR(vphwc);
-+	LCR_PR(vphs);
-+	LCR_PR(vpvwc);
-+	LCR_PR(vpvs);
-+	LCR_PR(plhpix);
-+	LCR_PR(xs);
-+	LCR_PR(xckhw);
-+	LCR_PR(sths);
-+	LCR_PR(vt2);
-+	LCR_PR(ycksw);
-+	LCR_PR(ysts);
-+	LCR_PR(ppols);
-+	LCR_PR(precw);
-+	LCR_PR(vclkhw);
-+	LCR_PR(oc);
-+#undef LCR_PR
-+}
-+#endif
-+
-+#ifdef CONFIG_PM
-+static int tmiofb_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct fb_info			*info	= platform_get_drvdata(dev);
-+	struct tmiofb_par		*par	= info->par;
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	int				retval	= 0;
-+
-+	acquire_console_sem();
-+
-+	fb_set_suspend(info, 1);
-+
-+	if (info->fbops->fb_sync)
-+		info->fbops->fb_sync(info);
-+
-+
-+	printk(KERN_INFO "tmiofb: switching to polling\n");
-+	par->use_polling = true;
-+	tmiofb_hw_stop(dev);
-+
-+	if (cell->suspend)
-+		retval = cell->suspend(dev);
-+
-+	release_console_sem();
-+
-+	return retval;
-+}
-+
-+static int tmiofb_resume(struct platform_device *dev)
-+{
-+	struct fb_info			*info	= platform_get_drvdata(dev);
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	int				retval;
-+
-+	acquire_console_sem();
-+
-+	if (cell->resume) {
-+		retval = cell->resume(dev);
-+		if (retval)
-+			return retval;
-+	}
-+
-+	tmiofb_irq(-1, info);
-+
-+	tmiofb_hw_init(dev);
-+
-+	tmiofb_hw_mode(dev);
-+
-+	fb_set_suspend(info, 0);
-+	release_console_sem();
-+	return 0;
-+}
-+#endif
-+
-+static struct platform_driver tmiofb_driver = {
-+	.driver.name	= "tmio-fb",
-+	.driver.owner	= THIS_MODULE,
-+	.probe		= tmiofb_probe,
-+	.remove		= __devexit_p(tmiofb_remove),
-+#ifdef CONFIG_PM
-+	.suspend	= tmiofb_suspend,
-+	.resume		= tmiofb_resume,
-+#endif
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+
-+#ifndef MODULE
-+static void __init tmiofb_setup(char *options)
-+{
-+	char *this_opt;
-+
-+	if (!options || !*options)
-+		return;
-+
-+	while ((this_opt = strsep(&options, ",")) != NULL) {
-+		if (!*this_opt) continue;
-+		/*
-+		 * FIXME
-+		 */
-+	}
-+}
-+#endif
-+
-+static int __init tmiofb_init(void)
-+{
-+#ifndef MODULE
-+	char *option = NULL;
-+
-+	if (fb_get_options("tmiofb", &option))
-+		return -ENODEV;
-+	tmiofb_setup(option);
-+#endif
-+	return platform_driver_register(&tmiofb_driver);
-+}
-+
-+static void __exit tmiofb_cleanup(void)
-+{
-+	platform_driver_unregister(&tmiofb_driver);
-+}
-+
-+module_init(tmiofb_init);
-+module_exit(tmiofb_cleanup);
-+
-+MODULE_DESCRIPTION("TMIO framebuffer driver");
-+MODULE_AUTHOR("Chris Humbert, Dirk Opfer, Dmitry Baryshkov");
-+MODULE_LICENSE("GPL");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0010-OHCI-driver-for-TMIO-devices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0010-OHCI-driver-for-TMIO-devices.patch
deleted file mode 100644
index f358c069d0..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0010-OHCI-driver-for-TMIO-devices.patch
+++ /dev/null
@@ -1,431 +0,0 @@
-From e5f06830bc8d3ef4792c9c0569825d0347b39852 Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Fri, 4 Jan 2008 18:43:31 +0000
-Subject: [PATCH 10/64] OHCI driver for TMIO devices
-
----
- drivers/usb/Kconfig          |    1 +
- drivers/usb/host/Kconfig     |    1 +
- drivers/usb/host/ohci-hcd.c  |    5 +
- drivers/usb/host/ohci-tmio.c |  369 ++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 376 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ohci-tmio.c
-
-diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
-index 7580aa5..8912042 100644
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -36,6 +36,7 @@ config USB_ARCH_HAS_OHCI
- 	default y if ARCH_EP93XX
- 	default y if ARCH_AT91
- 	default y if ARCH_PNX4008
-+	default y if MFD_TC6393XB
- 	# PPC:
- 	default y if STB03xxx
- 	default y if PPC_MPC52xx
-diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
-index 49a91c5..5ae3589 100644
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -101,6 +101,7 @@ config USB_OHCI_HCD
- 	depends on USB && USB_ARCH_HAS_OHCI
- 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
- 	select I2C if ARCH_PNX4008
-+	select DMABOUNCE if MFD_TC6393XB
- 	---help---
- 	  The Open Host Controller Interface (OHCI) is a standard for accessing
- 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
-diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
-index ecfe800..77abf3e 100644
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1043,6 +1043,11 @@ MODULE_LICENSE ("GPL");
- #define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
- #endif
- 
-+#ifdef CONFIG_MFD_TC6393XB
-+#include "ohci-tmio.c"
-+#define PLATFORM_DRIVER		ohci_hcd_tmio_driver
-+#endif
-+
- #ifdef CONFIG_USB_OHCI_HCD_SSB
- #include "ohci-ssb.c"
- #define SSB_OHCI_DRIVER		ssb_ohci_driver
-diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
-new file mode 100644
-index 0000000..be609f3
---- /dev/null
-+++ b/drivers/usb/host/ohci-tmio.c
-@@ -0,0 +1,369 @@
-+/*
-+ * OHCI HCD(Host Controller Driver) for USB.
-+ *
-+ *(C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
-+ *(C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
-+ *(C) Copyright 2002 Hewlett-Packard Company
-+ *
-+ * Bus glue for Toshiba Mobile IO(TMIO) Controller's OHCI core
-+ *(C) Copyright 2005 Chris Humbert <mahadri-usb@drigon.com>
-+ *
-+ * This is known to work with the following variants:
-+ *	TC6393XB revision 3	(32kB SRAM)
-+ *
-+ * The TMIO's OHCI core DMAs through a small internal buffer that
-+ * is directly addressable by the CPU.  dma_declare_coherent_memory
-+ * and DMA bounce buffers allow the higher-level OHCI host driver to
-+ * work.  However, the dma API doesn't handle dma mapping failures
-+ * well(dma_sg_map() is a prime example), so it is unusable.
-+ *
-+ * This HC pretends be a PIO-ish controller and uses the kernel's
-+ * generic allocator for the entire SRAM.  Using the USB core's
-+ * usb_operations, we provide hcd_buffer_alloc/free.  Using the OHCI's
-+ * ohci_ops, we provide memory management for OHCI's TDs and EDs.  We
-+ * internally queue a URB's TDs until enough dma memory is available
-+ * to enqueue them with the HC.
-+ *
-+ * Written from sparse documentation from Toshiba and Sharp's driver
-+ * for the 2.4 kernel,
-+ *	usb-ohci-tc6393.c(C) Copyright 2004 Lineo Solutions, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/*#include <linux/fs.h>
-+#include <linux/mount.h>
-+#include <linux/pagemap.h>
-+#include <linux/init.h>
-+#include <linux/namei.h>
-+#include <linux/sched.h>*/
-+#include <linux/platform_device.h>
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+#include <linux/dma-mapping.h>
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * USB Host Controller Configuration Register
-+ */
-+struct tmio_uhccr {
-+	u8 x00[8];
-+	u8	revid;	/* 0x08 Revision ID				*/
-+	u8 x01[7];
-+	u16	basel;	/* 0x10 USB Control Register Base Address Low	*/
-+	u16	baseh;	/* 0x12 USB Control Register Base Address High	*/
-+	u8 x02[0x2c];
-+	u8	ilme;	/* 0x40 Internal Local Memory Enable		*/
-+	u8 x03[0x0b];
-+	u16	pm;	/* 0x4c Power Management			*/
-+	u8 x04[2];
-+	u8	intc;	/* 0x50 INT Control				*/
-+	u8 x05[3];
-+	u16	lmw1l;	/* 0x54 Local Memory Window 1 LMADRS Low	*/
-+	u16	lmw1h;	/* 0x56 Local Memory Window 1 LMADRS High	*/
-+	u16	lmw1bl;	/* 0x58 Local Memory Window 1 Base Address Low	*/
-+	u16	lmw1bh;	/* 0x5A Local Memory Window 1 Base Address High	*/
-+	u16	lmw2l;	/* 0x5C Local Memory Window 2 LMADRS Low	*/
-+	u16	lmw2h;	/* 0x5E Local Memory Window 2 LMADRS High	*/
-+	u16	lmw2bl;	/* 0x60 Local Memory Window 2 Base Address Low	*/
-+	u16	lmw2bh;	/* 0x62 Local Memory Window 2 Base Address High	*/
-+	u8 x06[0x98];
-+	u8	misc;	/* 0xFC MISC					*/
-+	u8 x07[3];
-+} __attribute__((packed));
-+
-+#define UHCCR_PM_GKEN      0x0001
-+#define UHCCR_PM_CKRNEN    0x0002
-+#define UHCCR_PM_USBPW1    0x0004
-+#define UHCCR_PM_USBPW2    0x0008
-+#define UHCCR_PM_PMEE      0x0100
-+#define UHCCR_PM_PMES      0x8000
-+
-+/*-------------------------------------------------------------------------*/
-+
-+struct tmio_hcd {
-+	struct tmio_uhccr __iomem *ccr;
-+};
-+
-+#define hcd_to_tmio(hcd)	((struct tmio_hcd *)(hcd_to_ohci(hcd) + 1))
-+#define ohci_to_tmio(ohci)	((struct tmio_hcd *)(ohci + 1))
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void tmio_stop_hc(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct usb_hcd			*hcd	= platform_get_drvdata(dev);
-+	struct tmio_hcd			*tmio	= hcd_to_tmio(hcd);
-+	struct tmio_uhccr __iomem	*ccr	= tmio->ccr;
-+	u16				pm;
-+
-+	pm = UHCCR_PM_GKEN | UHCCR_PM_CKRNEN | UHCCR_PM_USBPW1 | UHCCR_PM_USBPW2;
-+	iowrite8(0,		&ccr->intc);
-+	iowrite8(0,		&ccr->ilme);
-+	iowrite16(0,		&ccr->basel);
-+	iowrite16(0,		&ccr->baseh);
-+	iowrite16(pm,	&ccr->pm);
-+
-+	cell->disable(dev);
-+}
-+
-+static void tmio_start_hc(struct platform_device *dev)
-+{
-+	struct mfd_cell			*cell	= mfd_get_cell(dev);
-+	struct usb_hcd			*hcd	= platform_get_drvdata(dev);
-+	struct tmio_hcd			*tmio	= hcd_to_tmio(hcd);
-+	struct tmio_uhccr __iomem	*ccr	= tmio->ccr;
-+	u16				pm;
-+	unsigned long			base	= hcd->rsrc_start;
-+
-+	pm = UHCCR_PM_CKRNEN | UHCCR_PM_GKEN | UHCCR_PM_PMEE | UHCCR_PM_PMES;
-+	cell->enable(dev);
-+
-+	iowrite16(pm,	&ccr->pm);
-+	iowrite16(base,		&ccr->basel);
-+	iowrite16(base >> 16,	&ccr->baseh);
-+	iowrite8(1,		&ccr->ilme);
-+	iowrite8(2,		&ccr->intc);
-+
-+	dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
-+			ioread8(&ccr->revid), hcd->rsrc_start, hcd->irq);
-+}
-+
-+static int usb_hcd_tmio_probe(const struct hc_driver *driver,
-+		struct platform_device *dev)
-+{
-+	struct resource		*config	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_CONFIG);
-+	struct resource		*regs	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_CONTROL);
-+	struct resource		*sram	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM);
-+	int			irq	= platform_get_irq(dev, 0);
-+	struct tmio_hcd		*tmio;
-+	struct ohci_hcd		*ohci;
-+	struct usb_hcd		*hcd;
-+	int			retval;
-+
-+	if (usb_disabled())
-+		return -ENODEV;
-+
-+	hcd = usb_create_hcd(driver, &dev->dev, dev->dev.bus_id);
-+	if (!hcd) {
-+		retval = -ENOMEM;
-+		goto err_usb_create_hcd;
-+	}
-+
-+	hcd->rsrc_start	= regs->start;
-+	hcd->rsrc_len	= regs->end - regs->start + 1;
-+
-+	tmio		= hcd_to_tmio(hcd);
-+
-+	tmio->ccr = ioremap(config->start, config->end - config->start + 1);
-+	if (!tmio->ccr) {
-+		retval = -ENOMEM;
-+		goto err_ioremap_ccr;
-+	}
-+
-+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs) {
-+		retval = -ENOMEM;
-+		goto err_ioremap_regs;
-+	}
-+
-+	if (dma_declare_coherent_memory(&dev->dev, sram->start,
-+				sram->start,
-+				sram->end - sram->start + 1,
-+				DMA_MEMORY_MAP) != DMA_MEMORY_MAP) {
-+		retval = -EBUSY;
-+		goto err_dma_declare;
-+	}
-+
-+	retval = dmabounce_register_dev(&dev->dev, 512, 4096);
-+	if (retval)
-+		goto err_dmabounce_register_dev;
-+
-+	tmio_start_hc(dev);
-+	ohci = hcd_to_ohci(hcd);
-+	ohci_hcd_init(ohci);
-+
-+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+
-+	if (retval == 0)
-+		return retval;
-+
-+	tmio_stop_hc(dev);
-+
-+	dmabounce_unregister_dev(&dev->dev);
-+err_dmabounce_register_dev:
-+	dma_release_declared_memory(&dev->dev);
-+err_dma_declare:
-+	iounmap(hcd->regs);
-+err_ioremap_regs:
-+	iounmap(tmio->ccr);
-+err_ioremap_ccr:
-+	usb_put_hcd(hcd);
-+err_usb_create_hcd:
-+
-+	return retval;
-+}
-+
-+static void usb_hcd_tmio_remove(struct usb_hcd *hcd, struct platform_device *dev)
-+{
-+	struct tmio_hcd		*tmio	= hcd_to_tmio(hcd);
-+
-+	usb_remove_hcd(hcd);
-+	tmio_stop_hc(dev);
-+	dmabounce_unregister_dev(&dev->dev);
-+	dma_release_declared_memory(&dev->dev);
-+	iounmap(hcd->regs);
-+	iounmap(tmio->ccr);
-+	usb_put_hcd(hcd);
-+}
-+
-+static int __devinit
-+ohci_tmio_start(struct usb_hcd *hcd)
-+{
-+	struct ohci_hcd		*ohci	= hcd_to_ohci(hcd);
-+	int			retval;
-+
-+	if ((retval = ohci_init(ohci)) < 0)
-+		return retval;
-+
-+	if ((retval = ohci_run(ohci)) < 0) {
-+		err("can't start %s", hcd->self.bus_name);
-+		ohci_stop(hcd);
-+		return retval;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct hc_driver ohci_tmio_hc_driver = {
-+	.description =		hcd_name,
-+	.product_desc =		"TMIO OHCI USB Host Controller",
-+	.hcd_priv_size =	sizeof(struct ohci_hcd) + sizeof (struct tmio_hcd),
-+
-+	/* generic hardware linkage */
-+	.irq =			ohci_irq,
-+	.flags =		HCD_USB11 | HCD_MEMORY,
-+
-+	/* basic lifecycle operations */
-+	.start =		ohci_tmio_start,
-+	.stop =			ohci_stop,
-+	.shutdown =		ohci_shutdown,
-+
-+	/* managing i/o requests and associated device resources */
-+	.urb_enqueue =		ohci_urb_enqueue,
-+	.urb_dequeue =		ohci_urb_dequeue,
-+	.endpoint_disable =	ohci_endpoint_disable,
-+
-+	/* scheduling support */
-+	.get_frame_number =	ohci_get_frame,
-+
-+	/* root hub support */
-+	.hub_status_data =	ohci_hub_status_data,
-+	.hub_control =		ohci_hub_control,
-+	.hub_irq_enable =	ohci_rhsc_enable,
-+#ifdef	CONFIG_PM
-+	.bus_suspend =		ohci_bus_suspend,
-+	.bus_resume =		ohci_bus_resume,
-+#endif
-+	.start_port_reset =	ohci_start_port_reset,
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+static struct platform_driver ohci_hcd_tmio_driver;
-+
-+static int
-+tmio_dmabounce_check(struct device *dev, dma_addr_t dma, size_t size, void *data)
-+{
-+	struct resource		*sram	= data;
-+#ifdef DEBUG
-+	printk(KERN_ERR "tmio_dmabounce_check: %08x %d\n", dma, size);
-+#endif
-+
-+	if (dev->driver != &ohci_hcd_tmio_driver.driver)
-+		return 0;
-+
-+	if (sram->start <= dma && dma + size <= sram->end)
-+		return 0;
-+
-+	return 1;
-+}
-+
-+static u64 dma_mask = DMA_32BIT_MASK;
-+
-+static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
-+{
-+	struct resource		*sram	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM);
-+
-+	dev->dev.dma_mask = &dma_mask;
-+	dev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+	dmabounce_register_checker(tmio_dmabounce_check, sram);
-+
-+	return usb_hcd_tmio_probe(&ohci_tmio_hc_driver, dev);
-+}
-+
-+static int ohci_hcd_tmio_drv_remove(struct platform_device *dev)
-+{
-+	struct usb_hcd		*hcd	= platform_get_drvdata(dev);
-+	struct resource		*sram	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM);
-+
-+	usb_hcd_tmio_remove(hcd, dev);
-+
-+	platform_set_drvdata(dev, NULL);
-+
-+	dmabounce_remove_checker(tmio_dmabounce_check, sram);
-+
-+	return 0;
-+}
-+
-+#ifdef	CONFIG_PM
-+static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct usb_hcd		*hcd	= platform_get_drvdata(dev);
-+	struct ohci_hcd		*ohci	= hcd_to_ohci(hcd);
-+
-+	if (time_before(jiffies, ohci->next_statechange))
-+		msleep(5);
-+	ohci->next_statechange = jiffies;
-+
-+	tmio_stop_hc(dev);
-+	hcd->state = HC_STATE_SUSPENDED;
-+	dev->dev.power.power_state = PMSG_SUSPEND;
-+
-+	return 0;
-+}
-+
-+static int ohci_hcd_tmio_drv_resume(struct platform_device *dev)
-+{
-+	struct usb_hcd		*hcd	= platform_get_drvdata(dev);
-+	struct ohci_hcd		*ohci	= hcd_to_ohci(hcd);
-+
-+	if (time_before(jiffies, ohci->next_statechange))
-+		msleep(5);
-+	ohci->next_statechange = jiffies;
-+
-+	tmio_start_hc(dev);
-+
-+	dev->dev.power.power_state = PMSG_ON;
-+	usb_hcd_resume_root_hub(hcd);
-+
-+	return 0;
-+}
-+#endif
-+
-+static struct platform_driver ohci_hcd_tmio_driver = {
-+	.probe		= ohci_hcd_tmio_drv_probe,
-+	.remove		= ohci_hcd_tmio_drv_remove,
-+	.shutdown	= usb_hcd_platform_shutdown,
-+#ifdef CONFIG_PM
-+	.suspend	= ohci_hcd_tmio_drv_suspend,
-+	.resume		= ohci_hcd_tmio_drv_resume,
-+#endif
-+	.driver		= {
-+		.name	= "tmio-ohci",
-+	},
-+};
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch
deleted file mode 100644
index 6ff752d1ff..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch
+++ /dev/null
@@ -1,891 +0,0 @@
-From b358a64c1fdd1eb80da57f919c893d910db95e37 Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Sat, 29 Dec 2007 15:26:19 +0000
-Subject: [PATCH 11/64] MMC driver for TMIO devices
-
----
- drivers/mmc/host/Kconfig    |    6 +
- drivers/mmc/host/Makefile   |    1 +
- drivers/mmc/host/tmio_mmc.c |  633 +++++++++++++++++++++++++++++++++++++++++++
- drivers/mmc/host/tmio_mmc.h |  205 ++++++++++++++
- 4 files changed, 845 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mmc/host/tmio_mmc.c
- create mode 100644 drivers/mmc/host/tmio_mmc.h
-
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index 5fef678..f8f9b7e 100644
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -130,3 +130,9 @@ config MMC_SPI
- 
- 	  If unsure, or if your system has no SPI master driver, say N.
- 
-+config MMC_TMIO
-+	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
-+	depends on MMC
-+	help
-+	  This provides support for the SD/MMC cell found in TC6393XB,
-+	  T7L66XB and also ipaq ASIC3
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 3877c87..7ac956b 100644
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -17,4 +17,5 @@ obj-$(CONFIG_MMC_OMAP)		+= omap.o
- obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
- obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
- obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
-+obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
- 
-diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
-new file mode 100644
-index 0000000..735c386
---- /dev/null
-+++ b/drivers/mmc/host/tmio_mmc.c
-@@ -0,0 +1,633 @@
-+/*
-+ *  linux/drivers/mmc/tmio_mmc.c
-+ *
-+ *  Copyright (C) 2004 Ian Molton
-+ *  Copyright (C) 2007 Ian Molton
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Driver for the MMC / SD / SDIO cell found in:
-+ *
-+ * TC6393XB TC6391XB TC6387XB T7L66XB
-+ *
-+ * This driver draws mainly on scattered spec sheets, Reverse engineering
-+ * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
-+ * support). (Further 4 bit support from a later datasheet).
-+ *
-+ * TODO:
-+ *   Investigate using a workqueue for PIO transfers
-+ *   Eliminate FIXMEs
-+ *   SDIO support
-+ *   Better Power management
-+ *   Handle MMC errors better
-+ *   double buffer support
-+ *
-+ */
-+#include <linux/module.h>
-+#include <linux/irq.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/mmc/mmc.h>
-+#include <linux/mmc/host.h>
-+#include <linux/mfd-core.h>
-+#include <linux/mfd/tmio.h>
-+
-+#include "tmio_mmc.h"
-+
-+/*
-+ * Fixme - documentation conflicts on what the clock values are for the
-+ * various dividers.
-+ * One document I have says that its a divisor of a 24MHz clock, another 33.
-+ * This probably depends on HCLK for a given platform, so we may need to
-+ * require HCLK be passed to us from the MFD core.
-+ *
-+ */
-+
-+static void tmio_mmc_set_clock (struct tmio_mmc_host *host, int new_clock) {
-+	struct tmio_mmc_cnf __iomem *cnf = host->cnf;
-+	struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+	u32 clk = 0, clock;
-+
-+	if (new_clock) {
-+		for(clock = 46875, clk = 0x100; new_clock >= (clock<<1); ){
-+			clock <<= 1;
-+			clk >>= 1;
-+		}
-+		if(clk & 0x1)
-+			clk = 0x20000;
-+
-+		clk >>= 2;
-+		if(clk & 0x8000) /* For full speed we disable the divider. */
-+			writeb(0, &cnf->sd_clk_mode);
-+		else
-+			writeb(1, &cnf->sd_clk_mode);
-+		clk |= 0x100;
-+	}
-+
-+	writew(clk, &ctl->sd_card_clk_ctl);
-+}
-+
-+static void tmio_mmc_clk_stop (struct tmio_mmc_host *host) {
-+	struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+
-+	writew(0x0000, &ctl->clk_and_wait_ctl);
-+	msleep(10);
-+	writew(readw(&ctl->sd_card_clk_ctl) & ~0x0100, &ctl->sd_card_clk_ctl);
-+	msleep(10);
-+}
-+
-+static void tmio_mmc_clk_start (struct tmio_mmc_host *host) {
-+	struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+
-+	writew(readw(&ctl->sd_card_clk_ctl) | 0x0100, &ctl->sd_card_clk_ctl);
-+	msleep(10);
-+	writew(0x0100, &ctl->clk_and_wait_ctl);
-+	msleep(10);
-+}
-+
-+static void reset(struct tmio_mmc_host *host) {
-+	struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+
-+	/* FIXME - should we set stop clock reg here */
-+	writew(0x0000, &ctl->reset_sd);
-+	writew(0x0000, &ctl->reset_sdio);
-+	msleep(10);
-+	writew(0x0001, &ctl->reset_sd);
-+	writew(0x0001, &ctl->reset_sdio);
-+	msleep(10);
-+}
-+
-+static void
-+tmio_mmc_finish_request(struct tmio_mmc_host *host)
-+{
-+	struct mmc_request *mrq = host->mrq;
-+
-+	host->mrq = NULL;
-+	host->cmd = NULL;
-+	host->data = NULL;
-+
-+	mmc_request_done(host->mmc, mrq);
-+}
-+
-+/* These are the bitmasks the tmio chip requires to implement the MMC response
-+ * types. Note that R1 and R6 are the same in this scheme. */
-+#define APP_CMD        0x0040
-+#define RESP_NONE      0x0300
-+#define RESP_R1        0x0400
-+#define RESP_R1B       0x0500
-+#define RESP_R2        0x0600
-+#define RESP_R3        0x0700
-+#define DATA_PRESENT   0x0800
-+#define TRANSFER_READ  0x1000
-+#define TRANSFER_MULTI 0x2000
-+#define SECURITY_CMD   0x4000
-+
-+static void
-+tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
-+{
-+        struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+	struct mmc_data *data = host->data;
-+	int c = cmd->opcode;
-+
-+	if(cmd->opcode == MMC_STOP_TRANSMISSION) {
-+		writew(0x001, &ctl->stop_internal_action);
-+		return;
-+	}
-+
-+	switch(mmc_resp_type(cmd)) {
-+		case MMC_RSP_NONE: c |= RESP_NONE; break;
-+		case MMC_RSP_R1:   c |= RESP_R1;   break;
-+		case MMC_RSP_R1B:  c |= RESP_R1B;  break;
-+		case MMC_RSP_R2:   c |= RESP_R2;   break;
-+		case MMC_RSP_R3:   c |= RESP_R3;   break;
-+		default:
-+			DBG("Unknown response type %d\n", mmc_resp_type(cmd));
-+	}
-+
-+	host->cmd = cmd;
-+
-+/* FIXME - this seems to be ok comented out but the spec suggest this bit should
-+ *         be set when issuing app commands.
-+ *	if(cmd->flags & MMC_FLAG_ACMD)
-+ *		c |= APP_CMD;
-+ */
-+	if(data) {
-+		c |= DATA_PRESENT;
-+		if(data->blocks > 1) {
-+			writew(0x100, &ctl->stop_internal_action);
-+			c |= TRANSFER_MULTI;
-+		}
-+		if(data->flags & MMC_DATA_READ)
-+			c |= TRANSFER_READ;
-+	}
-+
-+	enable_mmc_irqs(ctl, TMIO_MASK_CMD);
-+
-+	/* Fire off the command */
-+	tmio_iowrite32(cmd->arg, ctl->arg_reg);
-+	writew(c, &ctl->sd_cmd);
-+}
-+
-+/* This chip always returns (at least?) as much data as you ask for.
-+ * Im unsure what happens if you ask for less than a block. This should be
-+ * looked into to ensure that a funny length read doesnt hose the controller.
-+ *
-+ * FIXME - this chip cannot do 1 and 2 byte data requests in 4 bit mode
-+ */
-+static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) {
-+        struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+	struct mmc_data *data = host->data;
-+        unsigned short *buf;
-+        unsigned int count;
-+        unsigned long flags;
-+
-+        if(!data){
-+		DBG("Spurious PIO IRQ\n");
-+                return;
-+        }
-+
-+	buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) +
-+	      host->sg_off);
-+
-+	/* Ensure we dont read more than one block. The chip will interrupt us
-+	 * When the next block is available.
-+	 * FIXME - this is probably not true now IRQ handling is fixed
-+	 */
-+	count = host->sg_ptr->length - host->sg_off;
-+	if(count > data->blksz)
-+		count = data->blksz;
-+
-+	DBG("count: %08x offset: %08x flags %08x\n",
-+	    count, host->sg_off, data->flags);
-+
-+	/* Transfer the data */
-+	if(data->flags & MMC_DATA_READ)
-+		readsw(&ctl->sd_data_port[0], buf, count >> 1);
-+	else
-+		writesw(&ctl->sd_data_port[0], buf, count >> 1);
-+
-+	host->sg_off += count;
-+
-+	tmio_mmc_kunmap_atomic(host, &flags);
-+
-+	if(host->sg_off == host->sg_ptr->length)
-+		tmio_mmc_next_sg(host);
-+
-+	return;
-+}
-+
-+static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) {
-+	struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+	struct mmc_data *data = host->data;
-+
-+	host->data = NULL;
-+
-+	if(!data){
-+		DBG("Spurious data end IRQ\n");
-+		return;
-+	}
-+
-+	/* FIXME - return correct transfer count on errors */
-+	if (!data->error)
-+		data->bytes_xfered = data->blocks * data->blksz;
-+	else
-+		data->bytes_xfered = 0;
-+
-+	DBG("Completed data request\n");
-+
-+	/*FIXME - other drivers allow an optional stop command of any given type
-+	 *        which we dont do, as the chip can auto generate them.
-+	 *        Perhaps we can be smarter about when to use auto CMD12 and
-+	 *        only issue the auto request when we know this is the desired
-+	 *        stop command, allowing fallback to the stop command the
-+	 *        upper layers expect. For now, we do what works.
-+	 */
-+
-+	writew(0x000, &ctl->stop_internal_action);
-+
-+	if(data->flags & MMC_DATA_READ)
-+		disable_mmc_irqs(ctl, TMIO_MASK_READOP);
-+	else
-+		disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
-+
-+	tmio_mmc_finish_request(host);
-+}
-+
-+static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) {
-+	struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+	struct mmc_command *cmd = host->cmd;
-+
-+	if(!host->cmd) {
-+		DBG("Spurious CMD irq\n");
-+		return;
-+	}
-+
-+	host->cmd = NULL;
-+
-+	/* This controller is sicker than the PXA one. not only do we need to
-+	 * drop the top 8 bits of the first response word, we also need to
-+	 * modify the order of the response for short response command types.
-+	 */
-+
-+	/* FIXME - this works but readl is wrong and will break on asic3... */
-+	cmd->resp[3] = tmio_ioread32(&ctl->response[0]);
-+	cmd->resp[2] = tmio_ioread32(&ctl->response[2]);
-+	cmd->resp[1] = tmio_ioread32(&ctl->response[4]);
-+	cmd->resp[0] = tmio_ioread32(&ctl->response[6]);
-+
-+	if(cmd->flags &  MMC_RSP_136) {
-+		cmd->resp[0] = (cmd->resp[0] <<8) | (cmd->resp[1] >>24);
-+		cmd->resp[1] = (cmd->resp[1] <<8) | (cmd->resp[2] >>24);
-+		cmd->resp[2] = (cmd->resp[2] <<8) | (cmd->resp[3] >>24);
-+		cmd->resp[3] <<= 8;
-+	}
-+	else if(cmd->flags & MMC_RSP_R3) {
-+		cmd->resp[0] = cmd->resp[3];
-+	}
-+
-+	if (stat & TMIO_STAT_CMDTIMEOUT)
-+		cmd->error = -ETIMEDOUT;
-+	else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
-+		cmd->error = -EILSEQ;
-+
-+	/* If there is data to handle we enable data IRQs here, and
-+	 * we will ultimatley finish the request in the data_end handler.
-+	 * If theres no data or we encountered an error, finish now.
-+	 */
-+	if(host->data && !cmd->error){
-+		if(host->data->flags & MMC_DATA_READ)
-+			enable_mmc_irqs(ctl, TMIO_MASK_READOP);
-+		else
-+			enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
-+	}
-+	else {
-+		tmio_mmc_finish_request(host);
-+	}
-+
-+	return;
-+}
-+
-+
-+static irqreturn_t tmio_mmc_irq(int irq, void *devid)
-+{
-+	struct tmio_mmc_host *host = devid;
-+	struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+	unsigned int ireg, irq_mask, status;
-+
-+	DBG("MMC IRQ begin\n");
-+
-+	status = tmio_ioread32(ctl->status);
-+	irq_mask   = tmio_ioread32(ctl->irq_mask);
-+	ireg   = status & TMIO_MASK_IRQ & ~irq_mask;
-+
-+#ifdef CONFIG_MMC_DEBUG
-+	debug_status(status);
-+	debug_status(ireg);
-+#endif
-+	if (!ireg) {
-+		disable_mmc_irqs(ctl, status & ~irq_mask);
-+#ifdef CONFIG_MMC_DEBUG
-+		WARN("tmio_mmc: Spurious MMC irq, disabling! 0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
-+		debug_status(status);
-+#endif
-+		goto out;
-+	}
-+
-+	while (ireg) {
-+		/* Card insert / remove attempts */
-+		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)){
-+			ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE);
-+			mmc_detect_change(host->mmc,0);
-+		}
-+
-+		/* CRC and other errors */
-+/*		if (ireg & TMIO_STAT_ERR_IRQ)
-+ *			handled |= tmio_error_irq(host, irq, stat);
-+ */
-+
-+		/* Command completion */
-+			if (ireg & TMIO_MASK_CMD) {
-+			tmio_mmc_cmd_irq(host, status);
-+			ack_mmc_irqs(ctl, TMIO_MASK_CMD);
-+		}
-+
-+		/* Data transfer */
-+		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
-+			ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
-+			tmio_mmc_pio_irq(host);
-+		}
-+
-+		/* Data transfer completion */
-+		if (ireg & TMIO_STAT_DATAEND) {
-+			tmio_mmc_data_irq(host);
-+			ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
-+		}
-+
-+		/* Check status - keep going until we've handled it all */
-+		status = tmio_ioread32(ctl->status);
-+		irq_mask   = tmio_ioread32(ctl->irq_mask);
-+		ireg   = status & TMIO_MASK_IRQ & ~irq_mask;
-+
-+#ifdef CONFIG_MMC_DEBUG
-+		DBG("Status at end of loop: %08x\n", status);
-+		debug_status(status);
-+#endif
-+	}
-+	DBG("MMC IRQ end\n");
-+
-+out:
-+	return IRQ_HANDLED;
-+}
-+
-+static void tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data)
-+{
-+	struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+
-+	DBG("setup data transfer: blocksize %08x  nr_blocks %d\n",
-+	    data->blksz, data->blocks);
-+
-+	tmio_mmc_init_sg(host, data);
-+	host->data = data;
-+
-+	/* Set transfer length / blocksize */
-+	writew(data->blksz,  &ctl->sd_xfer_len);
-+        writew(data->blocks, &ctl->xfer_blk_count);
-+}
-+
-+/* Process requests from the MMC layer */
-+static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+	struct tmio_mmc_host *host = mmc_priv(mmc);
-+
-+	WARN_ON(host->mrq != NULL);
-+
-+	host->mrq = mrq;
-+
-+	/* If we're performing a data request we need to setup some
-+	   extra information */
-+	if (mrq->data)
-+		tmio_mmc_start_data(host, mrq->data);
-+
-+	tmio_mmc_start_command(host, mrq->cmd);
-+}
-+
-+/* Set MMC clock / power.
-+ * Note: This controller uses a simple divider scheme therefore it cannot
-+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
-+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
-+ * slowest setting.
-+ */
-+static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+	struct tmio_mmc_host *host = mmc_priv(mmc);
-+	struct tmio_mmc_cnf __iomem *cnf = host->cnf;
-+        struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+
-+	if(ios->clock)
-+		tmio_mmc_set_clock (host, ios->clock);
-+
-+	/* Power sequence - OFF -> ON -> UP */
-+	switch (ios->power_mode) {
-+	case MMC_POWER_OFF:
-+		writeb(0x00, &cnf->pwr_ctl[1]);  /* power down SD bus */
-+		tmio_mmc_clk_stop(host);
-+		break;
-+	case MMC_POWER_ON:
-+		writeb(0x02, &cnf->pwr_ctl[1]);  /* power up SD bus */
-+		break;
-+	case MMC_POWER_UP:
-+		tmio_mmc_clk_start(host);         /* start bus clock */
-+		break;
-+	}
-+
-+	switch (ios->bus_width) {
-+	case MMC_BUS_WIDTH_1:
-+		writew(0x80e0, &ctl->sd_mem_card_opt);
-+	break;
-+	case MMC_BUS_WIDTH_4:
-+		writew(0x00e0, &ctl->sd_mem_card_opt);
-+	break;
-+	}
-+
-+	/* Potentially we may need a 140us pause here. FIXME */
-+	udelay(140);
-+}
-+
-+static int tmio_mmc_get_ro(struct mmc_host *mmc) {
-+	struct tmio_mmc_host *host = mmc_priv(mmc);
-+        struct tmio_mmc_ctl __iomem *ctl = host->ctl;
-+
-+	return (readw(&ctl->status[0]) & TMIO_STAT_WRPROTECT)?0:1;
-+}
-+
-+static struct mmc_host_ops tmio_mmc_ops = {
-+	.request	= tmio_mmc_request,
-+	.set_ios	= tmio_mmc_set_ios,
-+	.get_ro         = tmio_mmc_get_ro,
-+};
-+
-+static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state) {
-+	struct mfd_cell	*cell	= mfd_get_cell(dev);
-+	struct mmc_host *mmc = platform_get_drvdata(dev);
-+	int ret;
-+
-+	ret = mmc_suspend_host(mmc, state);
-+
-+        /* Tell MFD core it can disable us now.*/
-+	if(!ret && cell->disable)
-+		cell->disable(dev);
-+
-+	return ret;
-+}
-+
-+static int tmio_mmc_resume(struct platform_device *dev) {
-+	struct mfd_cell	*cell	= mfd_get_cell(dev);
-+	struct mmc_host *mmc = platform_get_drvdata(dev);
-+	struct tmio_mmc_host *host = mmc_priv(mmc);
-+	struct tmio_mmc_cnf __iomem *cnf = host->cnf;
-+
-+	/* Enable the MMC/SD Control registers */
-+	writew(SDCREN, &cnf->cmd);
-+	writel(dev->resource[0].start & 0xfffe, &cnf->ctl_base);
-+
-+	/* Tell the MFD core we are ready to be enabled */
-+	if(cell->enable)
-+		cell->enable(dev);
-+
-+	mmc_resume_host(mmc);
-+
-+	return 0;
-+}
-+
-+static int __devinit tmio_mmc_probe(struct platform_device *dev)
-+{
-+	struct mfd_cell	*cell	= mfd_get_cell(dev);
-+	struct tmio_mmc_cnf __iomem *cnf;
-+	struct tmio_mmc_ctl __iomem *ctl;
-+	struct tmio_mmc_host *host;
-+	struct mmc_host *mmc;
-+	int ret = -ENOMEM;
-+
-+	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
-+	if (!mmc) {
-+		goto out;
-+	}
-+
-+	host = mmc_priv(mmc);
-+	host->mmc = mmc;
-+	platform_set_drvdata(dev, mmc); /* Used so we can de-init safely. */
-+
-+	host->cnf = cnf = ioremap((unsigned long)dev->resource[1].start,
-+	                          (unsigned long)dev->resource[1].end -
-+	                          (unsigned long)dev->resource[1].start);
-+	if(!host->cnf)
-+		goto host_free;
-+
-+	host->ctl = ctl = ioremap((unsigned long)dev->resource[0].start,
-+	                          (unsigned long)dev->resource[0].end -
-+	                          (unsigned long)dev->resource[0].start);
-+	if (!host->ctl) {
-+		goto unmap_cnf;
-+	}
-+
-+	mmc->ops = &tmio_mmc_ops;
-+	mmc->caps = MMC_CAP_4_BIT_DATA;
-+	mmc->f_min = 46875;
-+	mmc->f_max = 24000000;
-+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-+
-+	/* Enable the MMC/SD Control registers */
-+	writew(SDCREN, &cnf->cmd);
-+	writel(dev->resource[0].start & 0xfffe, &cnf->ctl_base);
-+
-+	/* Tell the MFD core we are ready to be enabled */
-+	if(cell->enable)
-+		cell->enable(dev);
-+
-+	writeb(0x01,&cnf->pwr_ctl[2]);    /* Disable SD power during suspend */
-+	writeb(0x1f, &cnf->stop_clk_ctl); /* Route clock to SDIO??? FIXME */
-+	writeb(0x0, &cnf->pwr_ctl[1]);    /* Power down SD bus*/
-+	tmio_mmc_clk_stop(host);          /* Stop bus clock */
-+	reset(host);                      /* Reset MMC HC */
-+
-+	host->irq = (unsigned long)dev->resource[2].start;
-+	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc", host);
-+	if (ret){
-+		ret = -ENODEV;
-+		DBG("Failed to allocate IRQ.\n");
-+		goto unmap_ctl;
-+	}
-+	set_irq_type(host->irq, IRQT_FALLING);
-+
-+	mmc_add_host(mmc);
-+
-+	printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
-+	     (unsigned long)host->ctl, host->irq);
-+
-+	/* Lets unmask the IRQs we want to know about */
-+	disable_mmc_irqs(ctl, TMIO_MASK_ALL);
-+	enable_mmc_irqs(ctl,  TMIO_MASK_IRQ);
-+
-+	return 0;
-+
-+unmap_ctl:
-+	iounmap(host->ctl);
-+unmap_cnf:
-+	iounmap(host->cnf);
-+host_free:
-+	mmc_free_host(mmc);
-+out:
-+	return ret;
-+}
-+
-+static int __devexit tmio_mmc_remove(struct platform_device *dev)
-+{
-+	struct mmc_host *mmc = platform_get_drvdata(dev);
-+
-+	platform_set_drvdata(dev, NULL);
-+
-+	if (mmc) {
-+		struct tmio_mmc_host *host = mmc_priv(mmc);
-+		mmc_remove_host(mmc);
-+		free_irq(host->irq, host);
-+		/* FIXME - we might want to consider stopping the chip here. */
-+		iounmap(host->ctl);
-+		iounmap(host->cnf);
-+		mmc_free_host(mmc); /* FIXME - why does this call hang ? */
-+	}
-+	return 0;
-+}
-+
-+/* ------------------- device registration ----------------------- */
-+
-+static struct platform_driver tmio_mmc_driver = {
-+	.driver = {
-+		.name = "tmio-mmc",
-+	},
-+	.probe = tmio_mmc_probe,
-+	.remove = __devexit_p(tmio_mmc_remove),
-+#ifdef CONFIG_PM
-+	.suspend = tmio_mmc_suspend,
-+	.resume = tmio_mmc_resume,
-+#endif
-+};
-+
-+
-+static int __init tmio_mmc_init(void)
-+{
-+	return platform_driver_register (&tmio_mmc_driver);
-+}
-+
-+static void __exit tmio_mmc_exit(void)
-+{
-+	platform_driver_unregister (&tmio_mmc_driver);
-+}
-+
-+module_init(tmio_mmc_init);
-+module_exit(tmio_mmc_exit);
-+
-+MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
-+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-+MODULE_LICENSE("GPLv2");
-diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
-new file mode 100644
-index 0000000..d4d9f8f
---- /dev/null
-+++ b/drivers/mmc/host/tmio_mmc.h
-@@ -0,0 +1,205 @@
-+/* Definitons for use with the tmio_mmc.c
-+ *
-+ * (c) 2005 Ian Molton <spyro@f2s.com>
-+ * (c) 2007 Ian Molton <spyro@f2s.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+struct tmio_mmc_cnf {
-+	u8 x00[4];
-+	u16	cmd;
-+	u8 x01[10];
-+	u32	ctl_base;
-+	u8 x02[41];
-+	u8	int_pin;
-+	u8 x03[2];
-+	u8	stop_clk_ctl;
-+	u8	gclk_ctl;     /* Gated Clock Control */
-+	u8	sd_clk_mode;  /* 0x42 */
-+	u8 x04;
-+	u16	pin_status;
-+	u8 x05[2];
-+	u8	pwr_ctl[3];
-+	u8 x06;
-+	u8	card_detect_mode;
-+	u8 x07[3];
-+	u8	sd_slot;
-+	u8 x08[159];
-+	u8	ext_gclk_ctl_1; /* Extended Gated Clock Control 1 */
-+	u8	ext_gclk_ctl_2; /* Extended Gated Clock Control 2 */
-+	u8 x09[7];
-+	u8	ext_gclk_ctl_3; /* Extended Gated Clock Control 3 */
-+	u8	sd_led_en_1;
-+	u8 x10[3];
-+	u8	sd_led_en_2;
-+	u8 x11;
-+} __attribute__ ((packed));
-+
-+#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-+
-+struct tmio_mmc_ctl {
-+	u16	sd_cmd;
-+	u16	x00;
-+	u16	arg_reg[2];
-+	u16	stop_internal_action;
-+	u16	xfer_blk_count;
-+	u16	response[8];
-+	u16	status[2];
-+	u16	irq_mask[2];
-+	u16	sd_card_clk_ctl;
-+	u16	sd_xfer_len;
-+	u16	sd_mem_card_opt;
-+	u16	x01;
-+	u16	sd_error_detail_status[2];
-+	u16	sd_data_port[2];
-+	u16	transaction_ctl;
-+	u16	x02[85];
-+	u16	reset_sd;
-+	u16	x03[15];
-+	u16	sdio_regs[28];
-+	u16	clk_and_wait_ctl;
-+	u16	x04[83];
-+	u16	reset_sdio;
-+	u16	x05[15];
-+} __attribute__ ((packed));
-+
-+/* Definitions for values the CTRL_STATUS register can take. */
-+#define TMIO_STAT_CMDRESPEND    0x00000001
-+#define TMIO_STAT_DATAEND       0x00000004
-+#define TMIO_STAT_CARD_REMOVE   0x00000008
-+#define TMIO_STAT_CARD_INSERT   0x00000010
-+#define TMIO_STAT_SIGSTATE      0x00000020
-+#define TMIO_STAT_WRPROTECT     0x00000080
-+#define TMIO_STAT_CARD_REMOVE_A 0x00000100
-+#define TMIO_STAT_CARD_INSERT_A 0x00000200
-+#define TMIO_STAT_SIGSTATE_A    0x00000400
-+#define TMIO_STAT_CMD_IDX_ERR   0x00010000
-+#define TMIO_STAT_CRCFAIL       0x00020000
-+#define TMIO_STAT_STOPBIT_ERR   0x00040000
-+#define TMIO_STAT_DATATIMEOUT   0x00080000
-+#define TMIO_STAT_RXOVERFLOW    0x00100000
-+#define TMIO_STAT_TXUNDERRUN    0x00200000
-+#define TMIO_STAT_CMDTIMEOUT    0x00400000
-+#define TMIO_STAT_RXRDY         0x01000000
-+#define TMIO_STAT_TXRQ          0x02000000
-+#define TMIO_STAT_ILL_FUNC      0x20000000
-+#define TMIO_STAT_CMD_BUSY      0x40000000
-+#define TMIO_STAT_ILL_ACCESS    0x80000000
-+
-+/* Define some IRQ masks */
-+/* This is the mask used at reset by the chip */
-+#define TMIO_MASK_ALL           0x837f031d
-+#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \
-+                           TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
-+#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \
-+                           TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
-+#define TMIO_MASK_CMD     (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
-+                           TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
-+#define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
-+
-+#define enable_mmc_irqs(ctl, i) \
-+	do { \
-+		u32 mask;\
-+		mask  = tmio_ioread32((ctl)->irq_mask); \
-+		mask &= ~((i) & TMIO_MASK_IRQ); \
-+		tmio_iowrite32(mask, (ctl)->irq_mask); \
-+	} while (0)
-+
-+#define disable_mmc_irqs(ctl, i) \
-+	do { \
-+		u32 mask;\
-+		mask  = tmio_ioread32((ctl)->irq_mask); \
-+		mask |= ((i) & TMIO_MASK_IRQ); \
-+		tmio_iowrite32(mask, (ctl)->irq_mask); \
-+	} while (0)
-+
-+#define ack_mmc_irqs(ctl, i) \
-+	do { \
-+		u32 mask;\
-+		mask  = tmio_ioread32((ctl)->status); \
-+		mask &= ~((i) & TMIO_MASK_IRQ); \
-+		tmio_iowrite32(mask, (ctl)->status); \
-+	} while (0)
-+
-+
-+struct tmio_mmc_host {
-+	struct tmio_mmc_cnf __iomem *cnf;
-+	struct tmio_mmc_ctl __iomem *ctl;
-+	struct mmc_command      *cmd;
-+	struct mmc_request      *mrq;
-+	struct mmc_data         *data;
-+	struct mmc_host         *mmc;
-+	int                     irq;
-+
-+	/* pio related stuff */
-+	struct scatterlist      *sg_ptr;
-+	unsigned int            sg_len;
-+	unsigned int            sg_off;
-+};
-+
-+#include <linux/scatterlist.h>
-+#include <linux/blkdev.h>
-+
-+static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
-+{
-+	host->sg_len = data->sg_len;
-+	host->sg_ptr = data->sg;
-+	host->sg_off = 0;
-+}
-+
-+static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host)
-+{
-+	host->sg_ptr++;
-+	host->sg_off = 0;
-+	return --host->sg_len;
-+}
-+
-+static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host, unsigned long *flags)
-+{
-+	struct scatterlist *sg = host->sg_ptr;
-+
-+	local_irq_save(*flags);
-+	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
-+}
-+
-+static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host, unsigned long *flags)
-+{
-+	kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ);
-+	local_irq_restore(*flags);
-+}
-+
-+#ifdef CONFIG_MMC_DEBUG
-+#define DBG(args...)    printk(args)
-+
-+void debug_status(u32 status){
-+	printk("status: %08x = ", status);
-+	if(status & TMIO_STAT_CARD_REMOVE) printk("Card_removed ");
-+	if(status & TMIO_STAT_CARD_INSERT) printk("Card_insert ");
-+	if(status & TMIO_STAT_SIGSTATE) printk("Sigstate ");
-+	if(status & TMIO_STAT_WRPROTECT) printk("Write_protect ");
-+	if(status & TMIO_STAT_CARD_REMOVE_A) printk("Card_remove_A ");
-+	if(status & TMIO_STAT_CARD_INSERT_A) printk("Card_insert_A ");
-+	if(status & TMIO_STAT_SIGSTATE_A) printk("Sigstate_A ");
-+	if(status & TMIO_STAT_CMD_IDX_ERR) printk("Cmd_IDX_Err ");
-+	if(status & TMIO_STAT_STOPBIT_ERR) printk("Stopbit_ERR ");
-+	if(status & TMIO_STAT_ILL_FUNC) printk("ILLEGAL_FUNC ");
-+	if(status & TMIO_STAT_CMD_BUSY) printk("CMD_BUSY ");
-+	if(status & TMIO_STAT_CMDRESPEND)  printk("Response_end ");
-+	if(status & TMIO_STAT_DATAEND)     printk("Data_end ");
-+	if(status & TMIO_STAT_CRCFAIL)     printk("CRC_failure ");
-+	if(status & TMIO_STAT_DATATIMEOUT) printk("Data_timeout ");
-+	if(status & TMIO_STAT_CMDTIMEOUT)  printk("Command_timeout ");
-+	if(status & TMIO_STAT_RXOVERFLOW)  printk("RX_OVF ");
-+	if(status & TMIO_STAT_TXUNDERRUN)  printk("TX_UND ");
-+	if(status & TMIO_STAT_RXRDY)       printk("RX_rdy ");
-+	if(status & TMIO_STAT_TXRQ)        printk("TX_req ");
-+	if(status & TMIO_STAT_ILL_ACCESS)  printk("ILLEGAL_ACCESS ");
-+	printk("\n");
-+}
-+#else
-+#define DBG(fmt,args...)        do { } while (0)
-+#endif
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0012-Tosa-keyboard-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0012-Tosa-keyboard-support.patch
deleted file mode 100644
index 0fa10ebd4c..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0012-Tosa-keyboard-support.patch
+++ /dev/null
@@ -1,593 +0,0 @@
-From 6d377e8f80ce421e6842ac5f42081345fbc70002 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 01:27:41 +0300
-Subject: [PATCH 12/64] Tosa keyboard support
-
-Support keyboard on tosa (Sharp Zaurus SL-6000x).
-Largely based on patches by Dirk Opfer.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/tosa.c         |   43 ++++
- drivers/input/keyboard/Kconfig   |   21 ++
- drivers/input/keyboard/Makefile  |    1 +
- drivers/input/keyboard/tosakbd.c |  415 ++++++++++++++++++++++++++++++++++++++
- include/asm-arm/arch-pxa/tosa.h  |   30 +++
- 5 files changed, 510 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/keyboard/tosakbd.c
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index 240fd04..e7e0f52 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -21,6 +21,8 @@
- #include <linux/mmc/host.h>
- #include <linux/pm.h>
- #include <linux/delay.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- 
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -253,6 +255,46 @@ static struct platform_device tosakbd_device = {
- 	.id		= -1,
- };
- 
-+static struct gpio_keys_button tosa_gpio_keys[] = {
-+	{
-+		.type	= EV_PWR,
-+		.code	= KEY_SUSPEND,
-+		.gpio	= TOSA_GPIO_ON_KEY,
-+		.desc	= "On key",
-+		.wakeup	= 1,
-+		.active_low = 1,
-+	},
-+	{
-+		.type	= EV_KEY,
-+		.code	= TOSA_KEY_RECORD,
-+		.gpio	= TOSA_GPIO_RECORD_BTN,
-+		.desc	= "Record Button",
-+		.wakeup	= 1,
-+		.active_low = 1,
-+	},
-+	{
-+		.type	= EV_KEY,
-+		.code	= TOSA_KEY_SYNC,
-+		.gpio	= TOSA_GPIO_SYNC,
-+		.desc	= "Sync Button",
-+		.wakeup	= 1,
-+		.active_low = 1,
-+	},
-+};
-+
-+static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
-+	.buttons	= tosa_gpio_keys,
-+	.nbuttons	= ARRAY_SIZE(tosa_gpio_keys),
-+};
-+
-+static struct platform_device tosa_gpio_keys_device = {
-+	.name	= "gpio-keys",
-+	.id	= -1,
-+	.dev	= {
-+		.platform_data	= &tosa_gpio_keys_platform_data,
-+	},
-+};
-+
- /*
-  * Tosa LEDs
-  */
-@@ -265,6 +307,7 @@ static struct platform_device *devices[] __initdata = {
- 	&tosascoop_device,
- 	&tosascoop_jc_device,
- 	&tosakbd_device,
-+	&tosa_gpio_keys_device,
- 	&tosaled_device,
- };
- 
-diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
-index 086d58c..0c32762 100644
---- a/drivers/input/keyboard/Kconfig
-+++ b/drivers/input/keyboard/Kconfig
-@@ -154,6 +154,27 @@ config KEYBOARD_SPITZ
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called spitzkbd.
- 
-+config KEYBOARD_TOSA
-+	tristate "Tosa keyboard"
-+	depends on MACH_TOSA
-+	default y
-+	help
-+	  Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called tosakbd.
-+
-+config KEYBOARD_TOSA_USE_EXT_KEYCODES
-+	bool "Tosa keyboard: use extended keycodes"
-+	depends on KEYBOARD_TOSA
-+	default n
-+	help
-+	  Say Y here to enable the tosa keyboard driver to generate extended
-+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-+	  by either console keyboard driver or by Kdrive keybd driver.
-+
-+	  Say Y only if you know, what you are doing!
-+
- config KEYBOARD_AMIGA
- 	tristate "Amiga keyboard"
- 	depends on AMIGA
-diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
-index e97455f..6caa065 100644
---- a/drivers/input/keyboard/Makefile
-+++ b/drivers/input/keyboard/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
- obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
- obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
- obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
-+obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
- obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
- obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
- obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
-diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
-new file mode 100644
-index 0000000..3884d1e
---- /dev/null
-+++ b/drivers/input/keyboard/tosakbd.c
-@@ -0,0 +1,415 @@
-+/*
-+ *  Keyboard driver for Sharp Tosa models (SL-6000x)
-+ *
-+ *  Copyright (c) 2005 Dirk Opfer
-+ *  Copyright (c) 2007 Dmitry Baryshkov
-+ *
-+ *  Based on xtkbd.c/locomkbd.c/corgikbd.c
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/tosa.h>
-+
-+#define KB_ROWMASK(r)		(1 << (r))
-+#define SCANCODE(r, c)		(((r)<<4) + (c) + 1)
-+#define NR_SCANCODES		SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1
-+
-+#define SCAN_INTERVAL		(HZ/10)
-+
-+#define KB_DISCHARGE_DELAY	10
-+#define KB_ACTIVATE_DELAY	10
-+
-+static unsigned int tosakbd_keycode[NR_SCANCODES] = {
-+0,
-+0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P,
-+0, 0, 0, 0, 0, 0, 0, 0,
-+KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA,
-+0, 0, 0, 0, 0, 0, 0, 0,
-+KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT,
-+0, 0, 0, 0, 0, 0, 0, 0,
-+KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK,
-+KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0,
-+KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT,
-+0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,
-+KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0,
-+0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0,
-+KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT,
-+0, 0, 0,
-+};
-+
-+struct tosakbd {
-+	unsigned int keycode[ARRAY_SIZE(tosakbd_keycode)];
-+	struct input_dev *input;
-+
-+	spinlock_t lock; /* protect kbd scanning */
-+	struct timer_list timer;
-+};
-+
-+
-+/* Helper functions for reading the keyboard matrix
-+ * Note: We should really be using pxa_gpio_mode to alter GPDR but it
-+ *       requires a function call per GPIO bit which is excessive
-+ *       when we need to access 12 bits at once, multiple times.
-+ * These functions must be called within local_irq_save()/local_irq_restore()
-+ * or similar.
-+ */
-+#define GET_ROWS_STATUS(c)	((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT)
-+
-+static inline void tosakbd_discharge_all(void)
-+{
-+	/* STROBE All HiZ */
-+	GPCR1  = TOSA_GPIO_HIGH_STROBE_BIT;
-+	GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT;
-+	GPCR2  = TOSA_GPIO_LOW_STROBE_BIT;
-+	GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT;
-+}
-+
-+static inline void tosakbd_activate_all(void)
-+{
-+	/* STROBE ALL -> High */
-+	GPSR1  = TOSA_GPIO_HIGH_STROBE_BIT;
-+	GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT;
-+	GPSR2  = TOSA_GPIO_LOW_STROBE_BIT;
-+	GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT;
-+
-+	udelay(KB_DISCHARGE_DELAY);
-+
-+	/* STATE CLEAR */
-+	GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT;
-+}
-+
-+static inline void tosakbd_activate_col(int col)
-+{
-+	if (col <= 5) {
-+		/* STROBE col -> High, not col -> HiZ */
-+		GPSR1 = TOSA_GPIO_STROBE_BIT(col);
-+		GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
-+	} else {
-+		/* STROBE col -> High, not col -> HiZ */
-+		GPSR2 = TOSA_GPIO_STROBE_BIT(col);
-+		GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
-+	}
-+}
-+
-+static inline void tosakbd_reset_col(int col)
-+{
-+	if (col <= 5) {
-+		/* STROBE col -> Low */
-+		GPCR1 = TOSA_GPIO_STROBE_BIT(col);
-+		/* STROBE col -> out, not col -> HiZ */
-+		GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
-+	} else {
-+		/* STROBE col -> Low */
-+		GPCR2 = TOSA_GPIO_STROBE_BIT(col);
-+		/* STROBE col -> out, not col -> HiZ */
-+		GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
-+	}
-+}
-+/*
-+ * The tosa keyboard only generates interrupts when a key is pressed.
-+ * So when a key is pressed, we enable a timer.  This timer scans the
-+ * keyboard, and this is how we detect when the key is released.
-+ */
-+
-+/* Scan the hardware keyboard and push any changes up through the input layer */
-+static void tosakbd_scankeyboard(struct platform_device *dev)
-+{
-+	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-+	unsigned int row, col, rowd;
-+	unsigned long flags;
-+	unsigned int num_pressed = 0;
-+
-+	spin_lock_irqsave(&tosakbd->lock, flags);
-+
-+	for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) {
-+		/*
-+		 * Discharge the output driver capacitatance
-+		 * in the keyboard matrix. (Yes it is significant..)
-+		 */
-+		tosakbd_discharge_all();
-+		udelay(KB_DISCHARGE_DELAY);
-+
-+		tosakbd_activate_col(col);
-+		udelay(KB_ACTIVATE_DELAY);
-+
-+		rowd = GET_ROWS_STATUS(col);
-+
-+		for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) {
-+			unsigned int scancode, pressed;
-+			scancode = SCANCODE(row, col);
-+			pressed = rowd & KB_ROWMASK(row);
-+
-+			if (pressed && !tosakbd->keycode[scancode])
-+				dev_warn(&dev->dev,
-+						"unhandled scancode: 0x%02x\n",
-+						scancode);
-+
-+			input_report_key(tosakbd->input,
-+					tosakbd->keycode[scancode],
-+					pressed);
-+			if (pressed)
-+				num_pressed++;
-+		}
-+
-+		tosakbd_reset_col(col);
-+	}
-+
-+	tosakbd_activate_all();
-+
-+	input_sync(tosakbd->input);
-+
-+	/* if any keys are pressed, enable the timer */
-+	if (num_pressed)
-+		mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL);
-+
-+	spin_unlock_irqrestore(&tosakbd->lock, flags);
-+}
-+
-+/*
-+ * tosa keyboard interrupt handler.
-+ */
-+static irqreturn_t tosakbd_interrupt(int irq, void *__dev)
-+{
-+	struct platform_device *dev = __dev;
-+	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-+
-+	if (!timer_pending(&tosakbd->timer)) {
-+		/** wait chattering delay **/
-+		udelay(20);
-+		tosakbd_scankeyboard(dev);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * tosa timer checking for released keys
-+ */
-+static void tosakbd_timer_callback(unsigned long __dev)
-+{
-+	struct platform_device *dev = (struct platform_device *)__dev;
-+	tosakbd_scankeyboard(dev);
-+}
-+
-+#ifdef CONFIG_PM
-+static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-+
-+	del_timer_sync(&tosakbd->timer);
-+
-+	return 0;
-+}
-+
-+static int tosakbd_resume(struct platform_device *dev)
-+{
-+	tosakbd_scankeyboard(dev);
-+
-+	return 0;
-+}
-+#else
-+#define tosakbd_suspend		NULL
-+#define tosakbd_resume		NULL
-+#endif
-+
-+static int __devinit tosakbd_probe(struct platform_device *pdev) {
-+
-+	int i;
-+	struct tosakbd *tosakbd;
-+	struct input_dev *input_dev;
-+	int error;
-+
-+	tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL);
-+	if (!tosakbd)
-+		return -ENOMEM;
-+
-+	input_dev = input_allocate_device();
-+	if (!input_dev) {
-+		kfree(tosakbd);
-+		return -ENOMEM;
-+	}
-+
-+	platform_set_drvdata(pdev, tosakbd);
-+
-+	spin_lock_init(&tosakbd->lock);
-+
-+	/* Init Keyboard rescan timer */
-+	init_timer(&tosakbd->timer);
-+	tosakbd->timer.function = tosakbd_timer_callback;
-+	tosakbd->timer.data = (unsigned long) pdev;
-+
-+	tosakbd->input = input_dev;
-+
-+	input_set_drvdata(input_dev, tosakbd);
-+	input_dev->name = "Tosa Keyboard";
-+	input_dev->phys = "tosakbd/input0";
-+	input_dev->dev.parent = &pdev->dev;
-+
-+	input_dev->id.bustype = BUS_HOST;
-+	input_dev->id.vendor = 0x0001;
-+	input_dev->id.product = 0x0001;
-+	input_dev->id.version = 0x0100;
-+
-+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
-+	input_dev->keycode = tosakbd->keycode;
-+	input_dev->keycodesize = sizeof(unsigned int);
-+	input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode);
-+
-+	memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode));
-+
-+	for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++)
-+		__set_bit(tosakbd->keycode[i], input_dev->keybit);
-+	clear_bit(0, input_dev->keybit);
-+
-+	/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
-+	for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
-+		int gpio = TOSA_GPIO_KEY_SENSE(i);
-+		int irq;
-+		error = gpio_request(gpio, "tosakbd");
-+		if (error < 0) {
-+			printk(KERN_ERR "tosakbd: failed to request GPIO %d, "
-+				" error %d\n", gpio, error);
-+			goto fail;
-+		}
-+
-+		error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i));
-+		if (error < 0) {
-+			printk(KERN_ERR "tosakbd: failed to configure input"
-+				" direction for GPIO %d, error %d\n",
-+				gpio, error);
-+			gpio_free(gpio);
-+			goto fail;
-+		}
-+
-+		irq = gpio_to_irq(gpio);
-+		if (irq < 0) {
-+			error = irq;
-+			printk(KERN_ERR "gpio-keys: Unable to get irq number"
-+				" for GPIO %d, error %d\n",
-+				gpio, error);
-+			gpio_free(gpio);
-+			goto fail;
-+		}
-+
-+		error = request_irq(irq, tosakbd_interrupt,
-+					IRQF_DISABLED | IRQF_TRIGGER_RISING,
-+					"tosakbd", pdev);
-+
-+		if (error) {
-+			printk("tosakbd: Can't get IRQ: %d: error %d!\n",
-+					irq, error);
-+			gpio_free(gpio);
-+			goto fail;
-+		}
-+	}
-+
-+	/* Set Strobe lines as outputs - set high */
-+	for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) {
-+		int gpio = TOSA_GPIO_KEY_STROBE(i);
-+		error = gpio_request(gpio, "tosakbd");
-+		if (error < 0) {
-+			printk(KERN_ERR "tosakbd: failed to request GPIO %d, "
-+				" error %d\n", gpio, error);
-+			goto fail2;
-+		}
-+
-+		error = gpio_direction_output(gpio, 1);
-+		if (error < 0) {
-+			printk(KERN_ERR "tosakbd: failed to configure input"
-+				" direction for GPIO %d, error %d\n",
-+				gpio, error);
-+			gpio_free(gpio);
-+			goto fail;
-+		}
-+
-+	}
-+
-+	error = input_register_device(input_dev);
-+	if (error) {
-+		printk(KERN_ERR "tosakbd: Unable to register input device, "
-+			"error: %d\n", error);
-+		goto fail;
-+	}
-+
-+	printk(KERN_INFO "input: Tosa Keyboard Registered\n");
-+
-+	return 0;
-+
-+fail2:
-+	while (--i >= 0)
-+		gpio_free(TOSA_GPIO_KEY_STROBE(i));
-+
-+	i = TOSA_KEY_SENSE_NUM;
-+fail:
-+	while (--i >= 0) {
-+		free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev);
-+		gpio_free(TOSA_GPIO_KEY_SENSE(i));
-+	}
-+
-+	platform_set_drvdata(pdev, NULL);
-+	input_free_device(input_dev);
-+	kfree(tosakbd);
-+
-+	return error;
-+}
-+
-+static int __devexit tosakbd_remove(struct platform_device *dev) {
-+
-+	int i;
-+	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-+
-+	for (i = 0; i < TOSA_KEY_STROBE_NUM; i++)
-+		gpio_free(TOSA_GPIO_KEY_STROBE(i));
-+
-+	for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
-+		free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev);
-+		gpio_free(TOSA_GPIO_KEY_SENSE(i));
-+	}
-+
-+	del_timer_sync(&tosakbd->timer);
-+
-+	input_unregister_device(tosakbd->input);
-+
-+	kfree(tosakbd);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver tosakbd_driver = {
-+	.probe		= tosakbd_probe,
-+	.remove		= __devexit_p(tosakbd_remove),
-+	.suspend	= tosakbd_suspend,
-+	.resume		= tosakbd_resume,
-+	.driver		= {
-+		.name	= "tosa-keyboard",
-+	},
-+};
-+
-+static int __devinit tosakbd_init(void)
-+{
-+	return platform_driver_register(&tosakbd_driver);
-+}
-+
-+static void __exit tosakbd_exit(void)
-+{
-+	platform_driver_unregister(&tosakbd_driver);
-+}
-+
-+module_init(tosakbd_init);
-+module_exit(tosakbd_exit);
-+
-+MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
-+MODULE_DESCRIPTION("Tosa Keyboard Driver");
-+MODULE_LICENSE("GPL v2");
-diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
-index c3364a2..c05e4fa 100644
---- a/include/asm-arm/arch-pxa/tosa.h
-+++ b/include/asm-arm/arch-pxa/tosa.h
-@@ -163,4 +163,34 @@
- 
- extern struct platform_device tosascoop_jc_device;
- extern struct platform_device tosascoop_device;
-+
-+#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
-+
-+
-+#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
-+#define TOSA_KEY_RECORD		KEY_YEN
-+#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
-+#define TOSA_KEY_CANCEL		KEY_ESC
-+#define TOSA_KEY_CENTER		KEY_HIRAGANA
-+#define TOSA_KEY_OK		KEY_HENKAN
-+#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
-+#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
-+#define TOSA_KEY_LIGHT		KEY_MUHENKAN
-+#define TOSA_KEY_MENU		KEY_HANJA
-+#define TOSA_KEY_FN		KEY_RIGHTALT
-+#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
-+#else
-+#define TOSA_KEY_RECORD		KEY_RECORD
-+#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
-+#define TOSA_KEY_CANCEL		KEY_CANCEL
-+#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
-+#define TOSA_KEY_OK		KEY_OK
-+#define TOSA_KEY_CALENDAR	KEY_CALENDAR
-+#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
-+#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
-+#define TOSA_KEY_MENU		KEY_MENU
-+#define TOSA_KEY_FN		KEY_FN
-+#define TOSA_KEY_MAIL		KEY_MAIL
-+#endif
-+
- #endif /* _ASM_ARCH_TOSA_H_ */
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0013-USB-gadget-pxa2xx_udc-supports-inverted-vbus.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0013-USB-gadget-pxa2xx_udc-supports-inverted-vbus.patch
deleted file mode 100644
index 082a2c72b8..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0013-USB-gadget-pxa2xx_udc-supports-inverted-vbus.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 18c1a92a09faf75ebdac7ac471c741a6622cf3e2 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 01:27:49 +0300
-Subject: [PATCH 13/64] USB: gadget: pxa2xx_udc supports inverted vbus
-
-Some boards (like e.g. Tosa) invert the VBUS-detection signal:
-it's low when a host is supplying VBUS, and high otherwise.
-Allow specifying whether gpio_vbus value is inverted.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
-Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
----
- drivers/usb/gadget/pxa2xx_udc.c   |    9 +++++++--
- include/asm-arm/mach/udc_pxa2xx.h |    2 ++
- 2 files changed, 9 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
-index 3173b39..4f7d4ef 100644
---- a/drivers/usb/gadget/pxa2xx_udc.c
-+++ b/drivers/usb/gadget/pxa2xx_udc.c
-@@ -127,8 +127,10 @@ static int is_vbus_present(void)
- {
- 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
- 
--	if (mach->gpio_vbus)
--		return gpio_get_value(mach->gpio_vbus);
-+	if (mach->gpio_vbus) {
-+		int value = gpio_get_value(mach->gpio_vbus);
-+		return mach->gpio_vbus_inverted ? !value : value;
-+	}
- 	if (mach->udc_is_connected)
- 		return mach->udc_is_connected();
- 	return 1;
-@@ -1397,6 +1399,9 @@ static irqreturn_t udc_vbus_irq(int irq, void *_dev)
- 	struct pxa2xx_udc	*dev = _dev;
- 	int			vbus = gpio_get_value(dev->mach->gpio_vbus);
- 
-+	if (dev->mach->gpio_vbus_inverted)
-+		vbus = !vbus;
-+
- 	pxa2xx_udc_vbus_session(&dev->gadget, vbus);
- 	return IRQ_HANDLED;
- }
-diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
-index ff0a957..f191e14 100644
---- a/include/asm-arm/mach/udc_pxa2xx.h
-+++ b/include/asm-arm/mach/udc_pxa2xx.h
-@@ -19,7 +19,9 @@ struct pxa2xx_udc_mach_info {
- 	 * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
- 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
- 	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
-+	 * Note that sometimes the signals go through inverters...
- 	 */
-+	bool	gpio_vbus_inverted;
- 	u16	gpio_vbus;			/* high == vbus present */
- 	u16	gpio_pullup;			/* high == pullup activated */
- };
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0014-tosa_udc_use_gpio_vbus.patch.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0014-tosa_udc_use_gpio_vbus.patch.patch
deleted file mode 100644
index 98783efea0..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0014-tosa_udc_use_gpio_vbus.patch.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 932ff38b17c7847c43e2bad01b510b64c27f9810 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 01:27:59 +0300
-Subject: [PATCH 14/64] tosa_udc_use_gpio_vbus.patch
-
-Use gpio_vbus instead of udc_is_connected for udc on tosa.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- arch/arm/mach-pxa/tosa.c |    9 ++-------
- 1 files changed, 2 insertions(+), 7 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index e7e0f52..5268e94 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -159,15 +159,10 @@ static void tosa_udc_command(int cmd)
- 	}
- }
- 
--static int tosa_udc_is_connected(void)
--{
--	return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
--}
--
--
- static struct pxa2xx_udc_mach_info udc_info __initdata = {
- 	.udc_command		= tosa_udc_command,
--	.udc_is_connected	= tosa_udc_is_connected,
-+	.gpio_vbus		= TOSA_GPIO_USB_IN,
-+	.gpio_vbus_inverted	= 1,
- };
- 
- /*
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0015-sharpsl-export-params.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0015-sharpsl-export-params.patch
deleted file mode 100644
index f8e57e8306..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0015-sharpsl-export-params.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From bba216220d17d1091413e82c9924ac5614402c05 Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Wed, 9 Jan 2008 01:28:06 +0300
-Subject: [PATCH 15/64] sharpsl export params
-
----
- arch/arm/common/sharpsl_param.c |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
-index aad4d94..d56c932 100644
---- a/arch/arm/common/sharpsl_param.c
-+++ b/arch/arm/common/sharpsl_param.c
-@@ -12,6 +12,7 @@
-  */
- 
- #include <linux/kernel.h>
-+#include <linux/module.h>
- #include <linux/string.h>
- #include <asm/mach/sharpsl_param.h>
- 
-@@ -36,6 +37,7 @@
- #define PHAD_MAGIC	MAGIC_CHG('P','H','A','D')
- 
- struct sharpsl_param_info sharpsl_param;
-+EXPORT_SYMBOL(sharpsl_param);
- 
- void sharpsl_save_param(void)
- {
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch
deleted file mode 100644
index d73de0698c..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 0fe7b491b70efafbd41185f8e95a3eada65984a1 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Mon, 28 Jan 2008 01:49:28 +0300
-Subject: [PATCH 16/64] This patch fixes the pxa25x clocks definitions to add hwuart.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/pxa25x.c |    9 ++++++++-
- 1 files changed, 8 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
-index 9732d5d..006a6e0 100644
---- a/arch/arm/mach-pxa/pxa25x.c
-+++ b/arch/arm/mach-pxa/pxa25x.c
-@@ -111,11 +111,14 @@ static const struct clkops clk_pxa25x_lcd_ops = {
-  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
-  * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
-  */
-+static struct clk pxa25x_hwuart_clk =
-+	INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
-+;
-+
- static struct clk pxa25x_clks[] = {
- 	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
- 	INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
- 	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
--	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
- 	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
- 	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
- 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
-@@ -303,6 +306,10 @@ static int __init pxa25x_init(void)
- {
- 	int ret = 0;
- 
-+	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-+	if (cpu_is_pxa25x())
-+		clks_register(&pxa25x_hwuart_clk, 1);
-+
- 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
- 		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
- 
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch
deleted file mode 100644
index 5163361da3..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch
+++ /dev/null
@@ -1,280 +0,0 @@
-From 71857e8f6c4a8d2d3eac3037f02e0c30c6fdb37e Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 01:43:28 +0300
-Subject: [PATCH 17/64] Convert pxa2xx UDC to use debugfs
-
-Use debugfs instead of /proc/driver/udc
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/usb/gadget/pxa2xx_udc.c |  100 +++++++++++++++++----------------------
- drivers/usb/gadget/pxa2xx_udc.h |   10 +++-
- 2 files changed, 51 insertions(+), 59 deletions(-)
-
-diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
-index 4f7d4ef..2900556 100644
---- a/drivers/usb/gadget/pxa2xx_udc.c
-+++ b/drivers/usb/gadget/pxa2xx_udc.c
-@@ -38,13 +38,14 @@
- #include <linux/timer.h>
- #include <linux/list.h>
- #include <linux/interrupt.h>
--#include <linux/proc_fs.h>
- #include <linux/mm.h>
- #include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/irq.h>
- #include <linux/clk.h>
- #include <linux/err.h>
-+#include <linux/seq_file.h>
-+#include <linux/debugfs.h>
- 
- #include <asm/byteorder.h>
- #include <asm/dma.h>
-@@ -993,45 +994,36 @@ static const struct usb_gadget_ops pxa2xx_udc_ops = {
- 
- /*-------------------------------------------------------------------------*/
- 
--#ifdef CONFIG_USB_GADGET_DEBUG_FILES
--
--static const char proc_node_name [] = "driver/udc";
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
- 
-+static struct pxa2xx_udc memory;
- static int
--udc_proc_read(char *page, char **start, off_t off, int count,
--		int *eof, void *_dev)
-+udc_seq_show(struct seq_file *m, void *d)
- {
--	char			*buf = page;
--	struct pxa2xx_udc	*dev = _dev;
--	char			*next = buf;
--	unsigned		size = count;
-+	struct pxa2xx_udc	*dev = m->private;
- 	unsigned long		flags;
--	int			i, t;
-+	int			i;
- 	u32			tmp;
- 
--	if (off != 0)
--		return 0;
-+
-+	BUG_ON(dev == NULL);
- 
- 	local_irq_save(flags);
- 
- 	/* basic device status */
--	t = scnprintf(next, size, DRIVER_DESC "\n"
-+	seq_printf(m, DRIVER_DESC "\n"
- 		"%s version: %s\nGadget driver: %s\nHost %s\n\n",
- 		driver_name, DRIVER_VERSION SIZE_STR "(pio)",
- 		dev->driver ? dev->driver->driver.name : "(none)",
- 		is_vbus_present() ? "full speed" : "disconnected");
--	size -= t;
--	next += t;
- 
- 	/* registers for device and ep0 */
--	t = scnprintf(next, size,
-+	seq_printf(m,
- 		"uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
- 		UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
--	size -= t;
--	next += t;
- 
- 	tmp = UDCCR;
--	t = scnprintf(next, size,
-+	seq_printf(m,
- 		"udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
- 		(tmp & UDCCR_REM) ? " rem" : "",
- 		(tmp & UDCCR_RSTIR) ? " rstir" : "",
-@@ -1041,11 +1033,9 @@ udc_proc_read(char *page, char **start, off_t off, int count,
- 		(tmp & UDCCR_RSM) ? " rsm" : "",
- 		(tmp & UDCCR_UDA) ? " uda" : "",
- 		(tmp & UDCCR_UDE) ? " ude" : "");
--	size -= t;
--	next += t;
- 
- 	tmp = UDCCS0;
--	t = scnprintf(next, size,
-+	seq_printf(m,
- 		"udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
- 		(tmp & UDCCS0_SA) ? " sa" : "",
- 		(tmp & UDCCS0_RNE) ? " rne" : "",
-@@ -1055,28 +1045,22 @@ udc_proc_read(char *page, char **start, off_t off, int count,
- 		(tmp & UDCCS0_FTF) ? " ftf" : "",
- 		(tmp & UDCCS0_IPR) ? " ipr" : "",
- 		(tmp & UDCCS0_OPR) ? " opr" : "");
--	size -= t;
--	next += t;
- 
- 	if (dev->has_cfr) {
- 		tmp = UDCCFR;
--		t = scnprintf(next, size,
-+		seq_printf(m,
- 			"udccfr %02X =%s%s\n", tmp,
- 			(tmp & UDCCFR_AREN) ? " aren" : "",
- 			(tmp & UDCCFR_ACM) ? " acm" : "");
--		size -= t;
--		next += t;
- 	}
- 
- 	if (!is_vbus_present() || !dev->driver)
- 		goto done;
- 
--	t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
-+	seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
- 		dev->stats.write.bytes, dev->stats.write.ops,
- 		dev->stats.read.bytes, dev->stats.read.ops,
- 		dev->stats.irqs);
--	size -= t;
--	next += t;
- 
- 	/* dump endpoint queues */
- 	for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
-@@ -1090,55 +1074,57 @@ udc_proc_read(char *page, char **start, off_t off, int count,
- 			if (!d)
- 				continue;
- 			tmp = *dev->ep [i].reg_udccs;
--			t = scnprintf(next, size,
-+			seq_printf(m,
- 				"%s max %d %s udccs %02x irqs %lu\n",
- 				ep->ep.name, le16_to_cpu (d->wMaxPacketSize),
- 				"pio", tmp, ep->pio_irqs);
- 			/* TODO translate all five groups of udccs bits! */
- 
- 		} else /* ep0 should only have one transfer queued */
--			t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
-+			seq_printf(m, "ep0 max 16 pio irqs %lu\n",
- 				ep->pio_irqs);
--		if (t <= 0 || t > size)
--			goto done;
--		size -= t;
--		next += t;
- 
- 		if (list_empty(&ep->queue)) {
--			t = scnprintf(next, size, "\t(nothing queued)\n");
--			if (t <= 0 || t > size)
--				goto done;
--			size -= t;
--			next += t;
-+			seq_printf(m, "\t(nothing queued)\n");
- 			continue;
- 		}
- 		list_for_each_entry(req, &ep->queue, queue) {
--			t = scnprintf(next, size,
-+			seq_printf(m,
- 					"\treq %p len %d/%d buf %p\n",
- 					&req->req, req->req.actual,
- 					req->req.length, req->req.buf);
--			if (t <= 0 || t > size)
--				goto done;
--			size -= t;
--			next += t;
- 		}
- 	}
- 
- done:
- 	local_irq_restore(flags);
--	*eof = 1;
--	return count - size;
-+	return 0;
- }
- 
--#define create_proc_files() \
--	create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
--#define remove_proc_files() \
--	remove_proc_entry(proc_node_name, NULL)
-+static int
-+udc_debugfs_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, udc_seq_show, inode->i_private);
-+}
-+
-+static const struct file_operations debug_fops = {
-+	.open		= udc_debugfs_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+	.owner		= THIS_MODULE,
-+};
-+
-+#define create_debug_files(dev) \
-+	dev->debugfs_udc = debugfs_create_file(dev->gadget.name, S_IRUGO, \
-+			NULL, dev, &debug_fops)
-+#define remove_debug_files(dev) \
-+	if (dev->debugfs_udc) debugfs_remove(dev->debugfs_udc)
- 
- #else	/* !CONFIG_USB_GADGET_DEBUG_FILES */
- 
--#define create_proc_files() do {} while (0)
--#define remove_proc_files() do {} while (0)
-+#define create_debug_files(dev) do {} while (0)
-+#define remove_debug_files(dev) do {} while (0)
- 
- #endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
- 
-@@ -2245,7 +2231,7 @@ lubbock_fail0:
- 			goto err_vbus_irq;
- 		}
- 	}
--	create_proc_files();
-+	create_debug_files(dev);
- 
- 	return 0;
- 
-@@ -2282,7 +2268,7 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
- 		return -EBUSY;
- 
- 	udc_disable(dev);
--	remove_proc_files();
-+	remove_debug_files(dev);
- 
- 	if (dev->got_irq) {
- 		free_irq(platform_get_irq(pdev, 0), dev);
-diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
-index 1db46d7..c08b1a2 100644
---- a/drivers/usb/gadget/pxa2xx_udc.h
-+++ b/drivers/usb/gadget/pxa2xx_udc.h
-@@ -129,6 +129,10 @@ struct pxa2xx_udc {
- 	struct pxa2xx_udc_mach_info		*mach;
- 	u64					dma_mask;
- 	struct pxa2xx_ep			ep [PXA_UDC_NUM_ENDPOINTS];
-+
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+	struct dentry				*debugfs_udc;
-+#endif
- };
- 
- /*-------------------------------------------------------------------------*/
-@@ -153,6 +157,8 @@ static struct pxa2xx_udc *the_controller;
- 
- #ifdef DEBUG
- 
-+static int is_vbus_present(void);
-+
- static const char *state_name[] = {
- 	"EP0_IDLE",
- 	"EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
-@@ -207,8 +213,7 @@ dump_state(struct pxa2xx_udc *dev)
- 	unsigned	i;
- 
- 	DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
--		//is_usb_connected() ? "host " : "disconnected",
--		"host ",
-+		is_vbus_present() ? "host " : "disconnected",
- 		state_name[dev->ep0state],
- 		UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
- 	dump_udccr("udccr");
-@@ -224,7 +230,7 @@ dump_state(struct pxa2xx_udc *dev)
- 	} else
- 		DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
- 
--	//if (!is_usb_connected())
--	//	return;
-+	if (!is_vbus_present())
-+		return;
- 
- 	dump_udccs0 ("udccs0");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch
deleted file mode 100644
index 7bf4ad02d6..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From b9a0fdbf333b461682d5da8b9aaa42f4de91ffcf Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Sun, 10 Feb 2008 03:29:17 +0300
-Subject: [PATCH 18/64] Fix the pxa2xx_udc to balance calls to clk_enable/clk_disable
-
-Signed-off-by: Dmitry Baryshkov dbaryshkov@gmail.com
----
- drivers/usb/gadget/pxa2xx_udc.c |   84 +++++++++++++++++++++++----------------
- drivers/usb/gadget/pxa2xx_udc.h |    6 ++-
- 2 files changed, 54 insertions(+), 36 deletions(-)
-
-diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
-index 2900556..8e32d07 100644
---- a/drivers/usb/gadget/pxa2xx_udc.c
-+++ b/drivers/usb/gadget/pxa2xx_udc.c
-@@ -680,7 +680,7 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
- 
- 	/* kickstart this i/o queue? */
- 	if (list_empty(&ep->queue) && !ep->stopped) {
--		if (ep->desc == 0 /* ep0 */) {
-+		if (ep->desc == NULL /* ep0 */) {
- 			unsigned	length = _req->length;
- 
- 			switch (dev->ep0state) {
-@@ -734,7 +734,7 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
- 	}
- 
- 	/* pio or dma irq handler advances the queue. */
--	if (likely (req != 0))
-+	if (likely (req != NULL))
- 		list_add_tail(&req->queue, &ep->queue);
- 	local_irq_restore(flags);
- 
-@@ -934,20 +934,35 @@ static void udc_disable(struct pxa2xx_udc *);
- /* We disable the UDC -- and its 48 MHz clock -- whenever it's not
-  * in active use.
-  */
--static int pullup(struct pxa2xx_udc *udc, int is_active)
-+static int pullup(struct pxa2xx_udc *udc)
- {
--	is_active = is_active && udc->vbus && udc->pullup;
-+	int is_active = udc->vbus && udc->pullup && ! udc->suspended;
- 	DMSG("%s\n", is_active ? "active" : "inactive");
--	if (is_active)
--		udc_enable(udc);
--	else {
--		if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
--			DMSG("disconnect %s\n", udc->driver
--				? udc->driver->driver.name
--				: "(no driver)");
--			stop_activity(udc, udc->driver);
-+	if (is_active) {
-+		if (!udc->active) {
-+			udc->active = 1;
-+#ifdef	CONFIG_ARCH_PXA
-+			/* Enable clock for USB device */
-+			clk_enable(udc->clk);
-+#endif
-+			udc_enable(udc);
- 		}
--		udc_disable(udc);
-+	} else {
-+		if (udc->active) {
-+			if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
-+				DMSG("disconnect %s\n", udc->driver
-+					? udc->driver->driver.name
-+					: "(no driver)");
-+				stop_activity(udc, udc->driver);
-+			}
-+			udc_disable(udc);
-+#ifdef	CONFIG_ARCH_PXA
-+			/* Disable clock for USB device */
-+			clk_disable(udc->clk);
-+#endif
-+			udc->active = 0;
-+		}
-+
- 	}
- 	return 0;
- }
-@@ -958,9 +973,9 @@ static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
- 	struct pxa2xx_udc	*udc;
- 
- 	udc = container_of(_gadget, struct pxa2xx_udc, gadget);
--	udc->vbus = is_active = (is_active != 0);
-+	udc->vbus = (is_active != 0);
- 	DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
--	pullup(udc, is_active);
-+	pullup(udc);
- 	return 0;
- }
- 
-@@ -975,9 +990,8 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
- 	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
- 		return -EOPNOTSUPP;
- 
--	is_active = (is_active != 0);
--	udc->pullup = is_active;
--	pullup(udc, is_active);
-+	udc->pullup = (is_active != 0);
-+	pullup(udc);
- 	return 0;
- }
- 
-@@ -998,7 +1012,7 @@ static const struct usb_gadget_ops pxa2xx_udc_ops = {
- 
- static struct pxa2xx_udc memory;
- static int
--udc_seq_show(struct seq_file *m, void *d)
-+udc_seq_show(struct seq_file *m, void *_d)
- {
- 	struct pxa2xx_udc	*dev = m->private;
- 	unsigned long		flags;
-@@ -1145,11 +1159,6 @@ static void udc_disable(struct pxa2xx_udc *dev)
- 
- 	udc_clear_mask_UDCCR(UDCCR_UDE);
- 
--#ifdef	CONFIG_ARCH_PXA
--        /* Disable clock for USB device */
--	clk_disable(dev->clk);
--#endif
--
- 	ep0_idle (dev);
- 	dev->gadget.speed = USB_SPEED_UNKNOWN;
- }
-@@ -1190,11 +1199,6 @@ static void udc_enable (struct pxa2xx_udc *dev)
- {
- 	udc_clear_mask_UDCCR(UDCCR_UDE);
- 
--#ifdef	CONFIG_ARCH_PXA
--        /* Enable clock for USB device */
--	clk_enable(dev->clk);
--#endif
--
- 	/* try to clear these bits before we enable the udc */
- 	udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
- 
-@@ -1285,7 +1289,7 @@ fail:
- 	 * for set_configuration as well as eventual disconnect.
- 	 */
- 	DMSG("registered gadget driver '%s'\n", driver->driver.name);
--	pullup(dev, 1);
-+	pullup(dev);
- 	dump_state(dev);
- 	return 0;
- }
-@@ -1328,7 +1332,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
- 		return -EINVAL;
- 
- 	local_irq_disable();
--	pullup(dev, 0);
-+	dev->pullup = 0;
-+	pullup(dev);
- 	stop_activity(dev, driver);
- 	local_irq_enable();
- 
-@@ -2267,7 +2272,9 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
- 	if (dev->driver)
- 		return -EBUSY;
- 
--	udc_disable(dev);
-+	dev->pullup = 0;
-+	pullup(dev);
-+
- 	remove_debug_files(dev);
- 
- 	if (dev->got_irq) {
-@@ -2315,10 +2322,15 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
- static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
- {
- 	struct pxa2xx_udc	*udc = platform_get_drvdata(dev);
-+	unsigned long flags;
- 
- 	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
- 		WARN("USB host won't detect disconnect!\n");
--	pullup(udc, 0);
-+	udc->suspended = 1;
-+
-+	local_irq_save(flags);
-+	pullup(udc);
-+	local_irq_restore(flags);
- 
- 	return 0;
- }
-@@ -2326,8 +2338,12 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
- static int pxa2xx_udc_resume(struct platform_device *dev)
- {
- 	struct pxa2xx_udc	*udc = platform_get_drvdata(dev);
-+	unsigned long flags;
- 
--	pullup(udc, 1);
-+	udc->suspended = 0;
-+	local_irq_save(flags);
-+	pullup(udc);
-+	local_irq_restore(flags);
- 
- 	return 0;
- }
-diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
-index c08b1a2..93586b2 100644
---- a/drivers/usb/gadget/pxa2xx_udc.h
-+++ b/drivers/usb/gadget/pxa2xx_udc.h
-@@ -119,7 +119,9 @@ struct pxa2xx_udc {
- 						has_cfr : 1,
- 						req_pending : 1,
- 						req_std : 1,
--						req_config : 1;
-+						req_config : 1,
-+						suspended : 1,
-+						active : 1;
- 
- #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
- 	struct timer_list			timer;
-@@ -239,7 +241,7 @@ dump_state(struct pxa2xx_udc *dev)
- 		dev->stats.read.bytes, dev->stats.read.ops);
- 
- 	for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
--		if (dev->ep [i].desc == 0)
-+		if (dev->ep [i].desc == NULL)
- 			continue;
- 		DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs);
- 	}
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0019-pxa-remove-periodic-mode-emulation-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0019-pxa-remove-periodic-mode-emulation-support.patch
deleted file mode 100644
index 4b4107d655..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0019-pxa-remove-periodic-mode-emulation-support.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From bda65817167cce5294e1d84670f36815262ed550 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk@dyn-67.arm.linux.org.uk>
-Date: Sun, 3 Feb 2008 21:58:12 +0300
-Subject: [PATCH 19/64] pxa: remove periodic mode emulation support
-
-Apparantly, the generic time subsystem can accurately emulate periodic
-mode via the one-shot support code, so we don't need our own periodic
-emulation code anymore.  Just ensure that we build support for one shot
-into the generic time subsystem.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- arch/arm/Kconfig         |    1 +
- arch/arm/mach-pxa/time.c |   61 ++++++----------------------------------------
- 2 files changed, 9 insertions(+), 53 deletions(-)
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index a04f507..1be7182 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -345,6 +345,7 @@ config ARCH_PXA
- 	select GENERIC_GPIO
- 	select GENERIC_TIME
- 	select GENERIC_CLOCKEVENTS
-+	select TICK_ONESHOT
- 	help
- 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
- 
-diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
-index fbfa192..3c4abbf 100644
---- a/arch/arm/mach-pxa/time.c
-+++ b/arch/arm/mach-pxa/time.c
-@@ -59,55 +59,17 @@ unsigned long long sched_clock(void)
- }
- 
- 
-+#define MIN_OSCR_DELTA 16
-+
- static irqreturn_t
- pxa_ost0_interrupt(int irq, void *dev_id)
- {
--	int next_match;
- 	struct clock_event_device *c = dev_id;
- 
--	if (c->mode == CLOCK_EVT_MODE_ONESHOT) {
--		/* Disarm the compare/match, signal the event. */
--		OIER &= ~OIER_E0;
--		OSSR = OSSR_M0;
--		c->event_handler(c);
--	} else if (c->mode == CLOCK_EVT_MODE_PERIODIC) {
--		/* Call the event handler as many times as necessary
--		 * to recover missed events, if any (if we update
--		 * OSMR0 and OSCR0 is still ahead of us, we've missed
--		 * the event).  As we're dealing with that, re-arm the
--		 * compare/match for the next event.
--		 *
--		 * HACK ALERT:
--		 *
--		 * There's a latency between the instruction that
--		 * writes to OSMR0 and the actual commit to the
--		 * physical hardware, because the CPU doesn't (have
--		 * to) run at bus speed, there's a write buffer
--		 * between the CPU and the bus, etc. etc.  So if the
--		 * target OSCR0 is "very close", to the OSMR0 load
--		 * value, the update to OSMR0 might not get to the
--		 * hardware in time and we'll miss that interrupt.
--		 *
--		 * To be safe, if the new OSMR0 is "very close" to the
--		 * target OSCR0 value, we call the event_handler as
--		 * though the event actually happened.  According to
--		 * Nico's comment in the previous version of this
--		 * code, experience has shown that 6 OSCR ticks is
--		 * "very close" but he went with 8.  We will use 16,
--		 * based on the results of testing on PXA270.
--		 *
--		 * To be doubly sure, we also tell clkevt via
--		 * clockevents_register_device() not to ask for
--		 * anything that might put us "very close".
--	 */
--#define MIN_OSCR_DELTA 16
--		do {
--			OSSR = OSSR_M0;
--			next_match = (OSMR0 += LATCH);
--			c->event_handler(c);
--		} while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA)
--			 && (c->mode == CLOCK_EVT_MODE_PERIODIC));
--	}
-+	/* Disarm the compare/match, signal the event. */
-+	OIER &= ~OIER_E0;
-+	OSSR = OSSR_M0;
-+	c->event_handler(c);
- 
- 	return IRQ_HANDLED;
- }
-@@ -133,14 +95,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
- 	unsigned long irqflags;
- 
- 	switch (mode) {
--	case CLOCK_EVT_MODE_PERIODIC:
--		raw_local_irq_save(irqflags);
--		OSSR = OSSR_M0;
--		OIER |= OIER_E0;
--		OSMR0 = OSCR + LATCH;
--		raw_local_irq_restore(irqflags);
--		break;
--
- 	case CLOCK_EVT_MODE_ONESHOT:
- 		raw_local_irq_save(irqflags);
- 		OIER &= ~OIER_E0;
-@@ -158,13 +112,14 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
- 		break;
- 
- 	case CLOCK_EVT_MODE_RESUME:
-+	case CLOCK_EVT_MODE_PERIODIC:
- 		break;
- 	}
- }
- 
- static struct clock_event_device ckevt_pxa_osmr0 = {
- 	.name		= "osmr0",
--	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-+	.features	= CLOCK_EVT_FEAT_ONESHOT,
- 	.shift		= 32,
- 	.rating		= 200,
- 	.cpumask	= CPU_MASK_CPU0,
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0020-Provide-dew-device-clock-backports-from-2.6.24-git.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0020-Provide-dew-device-clock-backports-from-2.6.24-git.patch
deleted file mode 100644
index 0a42bc5855..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0020-Provide-dew-device-clock-backports-from-2.6.24-git.patch
+++ /dev/null
@@ -1,257 +0,0 @@
-From ee8ca5742e0000dd2369ef4d328c2c1117276a3b Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Mon, 4 Feb 2008 02:56:28 +0300
-Subject: [PATCH 20/64] Provide dew device/clock backports from 2.6.24-git
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/Kconfig            |    1 +
- arch/arm/mach-pxa/devices.h |   12 ++++++++++++
- arch/arm/mach-pxa/pxa25x.c  |   18 ++++++++++++------
- arch/arm/mach-pxa/pxa27x.c  |   22 ++++++++++++++++------
- arch/arm/mach-pxa/pxa3xx.c  |   30 ++++++++++++++++++++++++++++++
- kernel/Makefile             |    1 +
- 6 files changed, 72 insertions(+), 12 deletions(-)
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 1be7182..10faf9c 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -367,6 +367,7 @@ config ARCH_SA1100
- 	select ARCH_DISCONTIGMEM_ENABLE
- 	select ARCH_MTD_XIP
- 	select GENERIC_GPIO
-+	select GENERIC_TIME
- 	help
- 	  Support for StrongARM 11x0 based boards.
- 
-diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
-index 94c8d5c..96c7c89 100644
---- a/arch/arm/mach-pxa/devices.h
-+++ b/arch/arm/mach-pxa/devices.h
-@@ -1,4 +1,6 @@
- extern struct platform_device pxa_device_mci;
-+extern struct platform_device pxa3xx_device_mci2;
-+extern struct platform_device pxa3xx_device_mci3;
- extern struct platform_device pxa_device_udc;
- extern struct platform_device pxa_device_fb;
- extern struct platform_device pxa_device_ffuart;
-@@ -12,3 +14,13 @@ extern struct platform_device pxa_device_rtc;
- 
- extern struct platform_device pxa27x_device_i2c_power;
- extern struct platform_device pxa27x_device_ohci;
-+
-+extern struct platform_device pxa25x_device_ssp;
-+extern struct platform_device pxa25x_device_nssp;
-+extern struct platform_device pxa25x_device_assp;
-+extern struct platform_device pxa27x_device_ssp1;
-+extern struct platform_device pxa27x_device_ssp2;
-+extern struct platform_device pxa27x_device_ssp3;
-+extern struct platform_device pxa3xx_device_ssp4;
-+
-+void __init pxa_register_device(struct platform_device *dev, void *data);
-diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
-index 006a6e0..5988d99 100644
---- a/arch/arm/mach-pxa/pxa25x.c
-+++ b/arch/arm/mach-pxa/pxa25x.c
-@@ -123,12 +123,15 @@ static struct clk pxa25x_clks[] = {
- 	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
- 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
- 	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
-+
-+	INIT_CKEN("SSPCLK",  SSP, 3686400, 0, &pxa25x_device_ssp.dev),
-+	INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
-+	INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
-+
- 	/*
- 	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
- 	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
--	INIT_CKEN("SSPCLK",  SSP,  3686400,  0, NULL),
- 	INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
--	INIT_CKEN("NSSPCLK", NSSP, 3686400,  0, NULL),
- 	*/
- 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
- };
-@@ -216,8 +219,6 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
- 
- static void pxa25x_cpu_pm_enter(suspend_state_t state)
- {
--	CKEN = 0;
--
- 	switch (state) {
- 	case PM_SUSPEND_MEM:
- 		/* set resume return address */
-@@ -239,6 +240,8 @@ static void __init pxa25x_init_pm(void)
- {
- 	pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
- }
-+#else
-+static inline void pxa25x_init_pm(void) {}
- #endif
- 
- /* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
-@@ -300,6 +303,9 @@ static struct platform_device *pxa25x_devices[] __initdata = {
- 	&pxa_device_i2s,
- 	&pxa_device_ficp,
- 	&pxa_device_rtc,
-+	&pxa25x_device_ssp,
-+	&pxa25x_device_nssp,
-+	&pxa25x_device_assp,
- };
- 
- static int __init pxa25x_init(void)
-@@ -315,9 +321,9 @@ static int __init pxa25x_init(void)
- 
- 		if ((ret = pxa_init_dma(16)))
- 			return ret;
--#ifdef CONFIG_PM
-+
- 		pxa25x_init_pm();
--#endif
-+
- 		ret = platform_add_devices(pxa25x_devices,
- 					   ARRAY_SIZE(pxa25x_devices));
- 	}
-diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
-index 8e126e6..30ca4fd 100644
---- a/arch/arm/mach-pxa/pxa27x.c
-+++ b/arch/arm/mach-pxa/pxa27x.c
-@@ -150,11 +150,12 @@ static struct clk pxa27x_clks[] = {
- 	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
- 	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
- 
-+	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
-+	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
-+	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
-+
- 	/*
- 	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
--	INIT_CKEN("SSPCLK",  SSP1, 13000000, 0, NULL),
--	INIT_CKEN("SSPCLK",  SSP2, 13000000, 0, NULL),
--	INIT_CKEN("SSPCLK",  SSP3, 13000000, 0, NULL),
- 	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
- 	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
- 	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
-@@ -304,6 +305,8 @@ static void __init pxa27x_init_pm(void)
- {
- 	pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
- }
-+#else
-+static inline void pxa27x_init_pm(void) {}
- #endif
- 
- /* PXA27x:  Various gpios can issue wakeup events.  This logic only
-@@ -423,6 +426,11 @@ struct platform_device pxa27x_device_i2c_power = {
- 	.num_resources	= ARRAY_SIZE(i2c_power_resources),
- };
- 
-+void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-+{
-+	pxa27x_device_i2c_power.dev.platform_data = info;
-+}
-+
- static struct platform_device *devices[] __initdata = {
- 	&pxa_device_mci,
- 	&pxa_device_udc,
-@@ -435,7 +443,9 @@ static struct platform_device *devices[] __initdata = {
- 	&pxa_device_ficp,
- 	&pxa_device_rtc,
- 	&pxa27x_device_i2c_power,
--	&pxa27x_device_ohci,
-+	&pxa27x_device_ssp1,
-+	&pxa27x_device_ssp2,
-+	&pxa27x_device_ssp3,
- };
- 
- static int __init pxa27x_init(void)
-@@ -446,9 +456,9 @@ static int __init pxa27x_init(void)
- 
- 		if ((ret = pxa_init_dma(32)))
- 			return ret;
--#ifdef CONFIG_PM
-+
- 		pxa27x_init_pm();
--#endif
-+
- 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
- 	}
- 	return ret;
-diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
-index 61d9c9d..ccab9da 100644
---- a/arch/arm/mach-pxa/pxa3xx.c
-+++ b/arch/arm/mach-pxa/pxa3xx.c
-@@ -189,8 +189,31 @@ static struct clk pxa3xx_clks[] = {
- 
- 	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
- 	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
-+	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
-+
-+	PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
-+	PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
-+	PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
-+	PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
-+
-+	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
-+	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-+	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
- };
- 
-+#ifdef CONFIG_PM
-+#define SLEEP_SAVE_SIZE	4
-+
-+#define ISRAM_START	0x5c000000
-+#define ISRAM_SIZE	SZ_256K
-+
-+static inline void pxa3xx_init_pm(void) {}
-+static inline void pxa3xx_init_irq_pm(void) {}
-+#else
-+static inline void pxa3xx_init_pm(void) {}
-+static inline void pxa3xx_init_irq_pm(void) {}
-+#endif
-+
- void __init pxa3xx_init_irq(void)
- {
- 	/* enable CP6 access */
-@@ -202,6 +225,7 @@ void __init pxa3xx_init_irq(void)
- 	pxa_init_irq_low();
- 	pxa_init_irq_high();
- 	pxa_init_irq_gpio(128);
-+	pxa3xx_init_irq_pm();
- }
- 
- /*
-@@ -219,6 +243,10 @@ static struct platform_device *devices[] __initdata = {
- 	&pxa_device_i2s,
- 	&pxa_device_ficp,
- 	&pxa_device_rtc,
-+	&pxa27x_device_ssp1,
-+	&pxa27x_device_ssp2,
-+	&pxa27x_device_ssp3,
-+	&pxa3xx_device_ssp4,
- };
- 
- static int __init pxa3xx_init(void)
-@@ -231,6 +259,8 @@ static int __init pxa3xx_init(void)
- 		if ((ret = pxa_init_dma(32)))
- 			return ret;
- 
-+		pxa3xx_init_pm();
-+
- 		return platform_add_devices(devices, ARRAY_SIZE(devices));
- 	}
- 	return 0;
-diff --git a/kernel/Makefile b/kernel/Makefile
-index dfa9695..6d9a87c 100644
---- a/kernel/Makefile
-+++ b/kernel/Makefile
-@@ -57,6 +57,7 @@ obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
- obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
- obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o
- obj-$(CONFIG_MARKERS) += marker.o
-+obj-$(CONFIG_LATENCYTOP) += latencytop.o
- 
- ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)
- # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0021-Add-an-empty-drivers-gpio-directory-for-gpiolib-infr.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0021-Add-an-empty-drivers-gpio-directory-for-gpiolib-infr.patch
deleted file mode 100644
index 3f8512128a..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0021-Add-an-empty-drivers-gpio-directory-for-gpiolib-infr.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From b77665c545bc260d2b93add129413e4a724d7e6e Mon Sep 17 00:00:00 2001
-From: David Brownell <dbrownell@users.sourceforge.net>
-Date: Fri, 18 Jan 2008 00:35:00 +0300
-Subject: [PATCH 21/64] Add an empty drivers/gpio directory for gpiolib infrastructure and GPIO
- expanders.  It will be populated by later patches.
-
-This won't be the only place to hold such gpio_chip code.  Many external chips
-add a few GPIOs as secondary functionality (such as MFD drivers) and platform
-code frequently needs to closely integrate GPIO and IRQ support.
-
-This is placed *early* in the build/link sequence since it's common for other
-drivers to depend on GPIOs to do their work, so they must be initialized early
-in the device_initcall() sequence.
-
-Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
-Acked-by: Jean Delvare <khali@linux-fr.org>
-Cc: Eric Miao <eric.miao@marvell.com>
-Cc: Sam Ravnborg <sam@ravnborg.org>
-Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Cc: Philipp Zabel <philipp.zabel@gmail.com>
-Cc: Russell King <rmk@arm.linux.org.uk>
-Cc: Ben Gardner <bgardner@wabtec.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
- arch/arm/Kconfig      |    2 ++
- drivers/Kconfig       |    2 ++
- drivers/Makefile      |    1 +
- drivers/gpio/Kconfig  |   32 ++++++++++++++++++++++++++++++++
- drivers/gpio/Makefile |    3 +++
- 5 files changed, 40 insertions(+), 0 deletions(-)
- create mode 100644 drivers/gpio/Kconfig
- create mode 100644 drivers/gpio/Makefile
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 10faf9c..06ca241 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1042,6 +1042,8 @@ source "drivers/i2c/Kconfig"
- 
- source "drivers/spi/Kconfig"
- 
-+source "drivers/gpio/Kconfig"
-+
- source "drivers/w1/Kconfig"
- 
- source "drivers/power/Kconfig"
-diff --git a/drivers/Kconfig b/drivers/Kconfig
-index f4076d9..90e295a 100644
---- a/drivers/Kconfig
-+++ b/drivers/Kconfig
-@@ -52,6 +52,8 @@ source "drivers/i2c/Kconfig"
- 
- source "drivers/spi/Kconfig"
- 
-+source "drivers/gpio/Kconfig"
-+
- source "drivers/w1/Kconfig"
- 
- source "drivers/power/Kconfig"
-diff --git a/drivers/Makefile b/drivers/Makefile
-index 8cb37e3..8e5101f 100644
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -5,6 +5,7 @@
- # Rewritten to use lists instead of if-statements.
- #
- 
-+obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpio/
- obj-$(CONFIG_PCI)		+= pci/
- obj-$(CONFIG_PARISC)		+= parisc/
- obj-$(CONFIG_RAPIDIO)		+= rapidio/
-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-new file mode 100644
-index 0000000..560687c
---- /dev/null
-+++ b/drivers/gpio/Kconfig
-@@ -0,0 +1,32 @@
-+#
-+# GPIO infrastructure and expanders
-+#
-+
-+config HAVE_GPIO_LIB
-+	bool
-+	help
-+	  Platforms select gpiolib if they use this infrastructure
-+	  for all their GPIOs, usually starting with ones integrated
-+	  into SOC processors.
-+
-+menu "GPIO Support"
-+	depends on HAVE_GPIO_LIB
-+
-+config DEBUG_GPIO
-+	bool "Debug GPIO calls"
-+	depends on DEBUG_KERNEL
-+	help
-+	  Say Y here to add some extra checks and diagnostics to GPIO calls.
-+	  The checks help ensure that GPIOs have been properly initialized
-+	  before they are used and that sleeping calls aren not made from
-+	  nonsleeping contexts.  They can make bitbanged serial protocols
-+	  slower.  The diagnostics help catch the type of setup errors
-+	  that are most common when setting up new platforms or boards.
-+
-+# put expanders in the right section, in alphabetical order
-+
-+comment "I2C GPIO expanders:"
-+
-+comment "SPI GPIO expanders:"
-+
-+endmenu
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-new file mode 100644
-index 0000000..cdbba6b
---- /dev/null
-+++ b/drivers/gpio/Makefile
-@@ -0,0 +1,3 @@
-+# gpio support: dedicated expander chips, etc
-+
-+ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch
deleted file mode 100644
index f39fedbbaa..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch
+++ /dev/null
@@ -1,746 +0,0 @@
-From 3a0251c01446f3a6763e4406ca5495102db63aa4 Mon Sep 17 00:00:00 2001
-From: David Brownell <dbrownell@users.sourceforge.net>
-Date: Fri, 18 Jan 2008 00:35:20 +0300
-Subject: [PATCH 22/64] Provide new implementation infrastructure that platforms may choose to use
- when implementing the GPIO programming interface.  Platforms can update their
- GPIO support to use this.  In many cases the incremental cost to access a
- non-inlined GPIO should be less than a dozen instructions, with the memory
- cost being about a page (total) of extra data and code.  The upside is:
-
-  * Providing two features which were "want to have (but OK to defer)" when
-    GPIO interfaces were first discussed in November 2006:
-
-    -	A "struct gpio_chip" to plug in GPIOs that aren't directly supported
-	by SOC platforms, but come from FPGAs or other multifunction devices
-	using conventional device registers (like UCB-1x00 or SM501 GPIOs,
-	and southbridges in PCs with more open specs than usual).
-
-    -	Full support for message-based GPIO expanders, where registers are
-	accessed through sleeping I/O calls.  Previous support for these
-	"cansleep" calls was just stubs.  (One example: the widely used
-	pcf8574 I2C chips, with 8 GPIOs each.)
-
-  * Including a non-stub implementation of the gpio_{request,free}() calls,
-    making those calls much more useful.  The diagnostic labels are also
-    recorded given DEBUG_FS, so /sys/kernel/debug/gpio can show a snapshot
-    of all GPIOs known to this infrastructure.
-
-The driver programming interfaces introduced in 2.6.21 do not change at all;
-this infrastructure is entirely below those covers.
-
-Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
-Cc: Sam Ravnborg <sam@ravnborg.org>
-Cc: Jean Delvare <khali@linux-fr.org>
-Cc: Eric Miao <eric.miao@marvell.com>
-Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Cc: Philipp Zabel <philipp.zabel@gmail.com>
-Cc: Russell King <rmk@arm.linux.org.uk>
-Cc: Ben Gardner <bgardner@wabtec.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
- drivers/gpio/Makefile      |    2 +
- drivers/gpio/gpiolib.c     |  567 ++++++++++++++++++++++++++++++++++++++++++++
- include/asm-generic/gpio.h |   98 ++++++++
- 3 files changed, 667 insertions(+), 0 deletions(-)
- create mode 100644 drivers/gpio/gpiolib.c
-
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index cdbba6b..2db28ce 100644
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -1,3 +1,5 @@
- # gpio support: dedicated expander chips, etc
- 
- ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
-+
-+obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpiolib.o
-diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
-new file mode 100644
-index 0000000..d8db2f8
---- /dev/null
-+++ b/drivers/gpio/gpiolib.c
-@@ -0,0 +1,567 @@
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/irq.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/gpio.h>
-+
-+
-+/* Optional implementation infrastructure for GPIO interfaces.
-+ *
-+ * Platforms may want to use this if they tend to use very many GPIOs
-+ * that aren't part of a System-On-Chip core; or across I2C/SPI/etc.
-+ *
-+ * When kernel footprint or instruction count is an issue, simpler
-+ * implementations may be preferred.  The GPIO programming interface
-+ * allows for inlining speed-critical get/set operations for common
-+ * cases, so that access to SOC-integrated GPIOs can sometimes cost
-+ * only an instruction or two per bit.
-+ */
-+
-+
-+/* When debugging, extend minimal trust to callers and platform code.
-+ * Also emit diagnostic messages that may help initial bringup, when
-+ * board setup or driver bugs are most common.
-+ *
-+ * Otherwise, minimize overhead in what may be bitbanging codepaths.
-+ */
-+#ifdef	DEBUG
-+#define	extra_checks	1
-+#else
-+#define	extra_checks	0
-+#endif
-+
-+/* gpio_lock prevents conflicts during gpio_desc[] table updates.
-+ * While any GPIO is requested, its gpio_chip is not removable;
-+ * each GPIO's "requested" flag serves as a lock and refcount.
-+ */
-+static DEFINE_SPINLOCK(gpio_lock);
-+
-+struct gpio_desc {
-+	struct gpio_chip	*chip;
-+	unsigned long		flags;
-+/* flag symbols are bit numbers */
-+#define FLAG_REQUESTED	0
-+#define FLAG_IS_OUT	1
-+
-+#ifdef CONFIG_DEBUG_FS
-+	const char		*label;
-+#endif
-+};
-+static struct gpio_desc gpio_desc[ARCH_NR_GPIOS];
-+
-+static inline void desc_set_label(struct gpio_desc *d, const char *label)
-+{
-+#ifdef CONFIG_DEBUG_FS
-+	d->label = label;
-+#endif
-+}
-+
-+/* Warn when drivers omit gpio_request() calls -- legal but ill-advised
-+ * when setting direction, and otherwise illegal.  Until board setup code
-+ * and drivers use explicit requests everywhere (which won't happen when
-+ * those calls have no teeth) we can't avoid autorequesting.  This nag
-+ * message should motivate switching to explicit requests...
-+ */
-+static void gpio_ensure_requested(struct gpio_desc *desc)
-+{
-+	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
-+		pr_warning("GPIO-%d autorequested\n", (int)(desc - gpio_desc));
-+		desc_set_label(desc, "[auto]");
-+	}
-+}
-+
-+/* caller holds gpio_lock *OR* gpio is marked as requested */
-+static inline struct gpio_chip *gpio_to_chip(unsigned gpio)
-+{
-+	return gpio_desc[gpio].chip;
-+}
-+
-+/**
-+ * gpiochip_add() - register a gpio_chip
-+ * @chip: the chip to register, with chip->base initialized
-+ * Context: potentially before irqs or kmalloc will work
-+ *
-+ * Returns a negative errno if the chip can't be registered, such as
-+ * because the chip->base is invalid or already associated with a
-+ * different chip.  Otherwise it returns zero as a success code.
-+ */
-+int gpiochip_add(struct gpio_chip *chip)
-+{
-+	unsigned long	flags;
-+	int		status = 0;
-+	unsigned	id;
-+
-+	/* NOTE chip->base negative is reserved to mean a request for
-+	 * dynamic allocation.  We don't currently support that.
-+	 */
-+
-+	if (chip->base < 0 || (chip->base  + chip->ngpio) >= ARCH_NR_GPIOS) {
-+		status = -EINVAL;
-+		goto fail;
-+	}
-+
-+	spin_lock_irqsave(&gpio_lock, flags);
-+
-+	/* these GPIO numbers must not be managed by another gpio_chip */
-+	for (id = chip->base; id < chip->base + chip->ngpio; id++) {
-+		if (gpio_desc[id].chip != NULL) {
-+			status = -EBUSY;
-+			break;
-+		}
-+	}
-+	if (status == 0) {
-+		for (id = chip->base; id < chip->base + chip->ngpio; id++) {
-+			gpio_desc[id].chip = chip;
-+			gpio_desc[id].flags = 0;
-+		}
-+	}
-+
-+	spin_unlock_irqrestore(&gpio_lock, flags);
-+fail:
-+	/* failures here can mean systems won't boot... */
-+	if (status)
-+		pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n",
-+			chip->base, chip->base + chip->ngpio,
-+			chip->label ? : "generic");
-+	return status;
-+}
-+EXPORT_SYMBOL_GPL(gpiochip_add);
-+
-+/**
-+ * gpiochip_remove() - unregister a gpio_chip
-+ * @chip: the chip to unregister
-+ *
-+ * A gpio_chip with any GPIOs still requested may not be removed.
-+ */
-+int gpiochip_remove(struct gpio_chip *chip)
-+{
-+	unsigned long	flags;
-+	int		status = 0;
-+	unsigned	id;
-+
-+	spin_lock_irqsave(&gpio_lock, flags);
-+
-+	for (id = chip->base; id < chip->base + chip->ngpio; id++) {
-+		if (test_bit(FLAG_REQUESTED, &gpio_desc[id].flags)) {
-+			status = -EBUSY;
-+			break;
-+		}
-+	}
-+	if (status == 0) {
-+		for (id = chip->base; id < chip->base + chip->ngpio; id++)
-+			gpio_desc[id].chip = NULL;
-+	}
-+
-+	spin_unlock_irqrestore(&gpio_lock, flags);
-+	return status;
-+}
-+EXPORT_SYMBOL_GPL(gpiochip_remove);
-+
-+
-+/* These "optional" allocation calls help prevent drivers from stomping
-+ * on each other, and help provide better diagnostics in debugfs.
-+ * They're called even less than the "set direction" calls.
-+ */
-+int gpio_request(unsigned gpio, const char *label)
-+{
-+	struct gpio_desc	*desc;
-+	int			status = -EINVAL;
-+	unsigned long		flags;
-+
-+	spin_lock_irqsave(&gpio_lock, flags);
-+
-+	if (gpio >= ARCH_NR_GPIOS)
-+		goto done;
-+	desc = &gpio_desc[gpio];
-+	if (desc->chip == NULL)
-+		goto done;
-+
-+	/* NOTE:  gpio_request() can be called in early boot,
-+	 * before IRQs are enabled.
-+	 */
-+
-+	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
-+		desc_set_label(desc, label ? : "?");
-+		status = 0;
-+	} else
-+		status = -EBUSY;
-+
-+done:
-+	if (status)
-+		pr_debug("gpio_request: gpio-%d (%s) status %d\n",
-+			gpio, label ? : "?", status);
-+	spin_unlock_irqrestore(&gpio_lock, flags);
-+	return status;
-+}
-+EXPORT_SYMBOL_GPL(gpio_request);
-+
-+void gpio_free(unsigned gpio)
-+{
-+	unsigned long		flags;
-+	struct gpio_desc	*desc;
-+
-+	if (gpio >= ARCH_NR_GPIOS) {
-+		WARN_ON(extra_checks);
-+		return;
-+	}
-+
-+	spin_lock_irqsave(&gpio_lock, flags);
-+
-+	desc = &gpio_desc[gpio];
-+	if (desc->chip && test_and_clear_bit(FLAG_REQUESTED, &desc->flags))
-+		desc_set_label(desc, NULL);
-+	else
-+		WARN_ON(extra_checks);
-+
-+	spin_unlock_irqrestore(&gpio_lock, flags);
-+}
-+EXPORT_SYMBOL_GPL(gpio_free);
-+
-+
-+/**
-+ * gpiochip_is_requested - return string iff signal was requested
-+ * @chip: controller managing the signal
-+ * @offset: of signal within controller's 0..(ngpio - 1) range
-+ *
-+ * Returns NULL if the GPIO is not currently requested, else a string.
-+ * If debugfs support is enabled, the string returned is the label passed
-+ * to gpio_request(); otherwise it is a meaningless constant.
-+ *
-+ * This function is for use by GPIO controller drivers.  The label can
-+ * help with diagnostics, and knowing that the signal is used as a GPIO
-+ * can help avoid accidentally multiplexing it to another controller.
-+ */
-+const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset)
-+{
-+	unsigned gpio = chip->base + offset;
-+
-+	if (gpio >= ARCH_NR_GPIOS || gpio_desc[gpio].chip != chip)
-+		return NULL;
-+	if (test_bit(FLAG_REQUESTED, &gpio_desc[gpio].flags) == 0)
-+		return NULL;
-+#ifdef CONFIG_DEBUG_FS
-+	return gpio_desc[gpio].label;
-+#else
-+	return "?";
-+#endif
-+}
-+EXPORT_SYMBOL_GPL(gpiochip_is_requested);
-+
-+
-+/* Drivers MUST set GPIO direction before making get/set calls.  In
-+ * some cases this is done in early boot, before IRQs are enabled.
-+ *
-+ * As a rule these aren't called more than once (except for drivers
-+ * using the open-drain emulation idiom) so these are natural places
-+ * to accumulate extra debugging checks.  Note that we can't (yet)
-+ * rely on gpio_request() having been called beforehand.
-+ */
-+
-+int gpio_direction_input(unsigned gpio)
-+{
-+	unsigned long		flags;
-+	struct gpio_chip	*chip;
-+	struct gpio_desc	*desc = &gpio_desc[gpio];
-+	int			status = -EINVAL;
-+
-+	spin_lock_irqsave(&gpio_lock, flags);
-+
-+	if (gpio >= ARCH_NR_GPIOS)
-+		goto fail;
-+	chip = desc->chip;
-+	if (!chip || !chip->get || !chip->direction_input)
-+		goto fail;
-+	gpio -= chip->base;
-+	if (gpio >= chip->ngpio)
-+		goto fail;
-+	gpio_ensure_requested(desc);
-+
-+	/* now we know the gpio is valid and chip won't vanish */
-+
-+	spin_unlock_irqrestore(&gpio_lock, flags);
-+
-+	might_sleep_if(extra_checks && chip->can_sleep);
-+
-+	status = chip->direction_input(chip, gpio);
-+	if (status == 0)
-+		clear_bit(FLAG_IS_OUT, &desc->flags);
-+	return status;
-+fail:
-+	spin_unlock_irqrestore(&gpio_lock, flags);
-+	if (status)
-+		pr_debug("%s: gpio-%d status %d\n",
-+			__FUNCTION__, gpio, status);
-+	return status;
-+}
-+EXPORT_SYMBOL_GPL(gpio_direction_input);
-+
-+int gpio_direction_output(unsigned gpio, int value)
-+{
-+	unsigned long		flags;
-+	struct gpio_chip	*chip;
-+	struct gpio_desc	*desc = &gpio_desc[gpio];
-+	int			status = -EINVAL;
-+
-+	spin_lock_irqsave(&gpio_lock, flags);
-+
-+	if (gpio >= ARCH_NR_GPIOS)
-+		goto fail;
-+	chip = desc->chip;
-+	if (!chip || !chip->set || !chip->direction_output)
-+		goto fail;
-+	gpio -= chip->base;
-+	if (gpio >= chip->ngpio)
-+		goto fail;
-+	gpio_ensure_requested(desc);
-+
-+	/* now we know the gpio is valid and chip won't vanish */
-+
-+	spin_unlock_irqrestore(&gpio_lock, flags);
-+
-+	might_sleep_if(extra_checks && chip->can_sleep);
-+
-+	status = chip->direction_output(chip, gpio, value);
-+	if (status == 0)
-+		set_bit(FLAG_IS_OUT, &desc->flags);
-+	return status;
-+fail:
-+	spin_unlock_irqrestore(&gpio_lock, flags);
-+	if (status)
-+		pr_debug("%s: gpio-%d status %d\n",
-+			__FUNCTION__, gpio, status);
-+	return status;
-+}
-+EXPORT_SYMBOL_GPL(gpio_direction_output);
-+
-+
-+/* I/O calls are only valid after configuration completed; the relevant
-+ * "is this a valid GPIO" error checks should already have been done.
-+ *
-+ * "Get" operations are often inlinable as reading a pin value register,
-+ * and masking the relevant bit in that register.
-+ *
-+ * When "set" operations are inlinable, they involve writing that mask to
-+ * one register to set a low value, or a different register to set it high.
-+ * Otherwise locking is needed, so there may be little value to inlining.
-+ *
-+ *------------------------------------------------------------------------
-+ *
-+ * IMPORTANT!!!  The hot paths -- get/set value -- assume that callers
-+ * have requested the GPIO.  That can include implicit requesting by
-+ * a direction setting call.  Marking a gpio as requested locks its chip
-+ * in memory, guaranteeing that these table lookups need no more locking
-+ * and that gpiochip_remove() will fail.
-+ *
-+ * REVISIT when debugging, consider adding some instrumentation to ensure
-+ * that the GPIO was actually requested.
-+ */
-+
-+/**
-+ * __gpio_get_value() - return a gpio's value
-+ * @gpio: gpio whose value will be returned
-+ * Context: any
-+ *
-+ * This is used directly or indirectly to implement gpio_get_value().
-+ * It returns the zero or nonzero value provided by the associated
-+ * gpio_chip.get() method; or zero if no such method is provided.
-+ */
-+int __gpio_get_value(unsigned gpio)
-+{
-+	struct gpio_chip	*chip;
-+
-+	chip = gpio_to_chip(gpio);
-+	WARN_ON(extra_checks && chip->can_sleep);
-+	return chip->get ? chip->get(chip, gpio - chip->base) : 0;
-+}
-+EXPORT_SYMBOL_GPL(__gpio_get_value);
-+
-+/**
-+ * __gpio_set_value() - assign a gpio's value
-+ * @gpio: gpio whose value will be assigned
-+ * @value: value to assign
-+ * Context: any
-+ *
-+ * This is used directly or indirectly to implement gpio_set_value().
-+ * It invokes the associated gpio_chip.set() method.
-+ */
-+void __gpio_set_value(unsigned gpio, int value)
-+{
-+	struct gpio_chip	*chip;
-+
-+	chip = gpio_to_chip(gpio);
-+	WARN_ON(extra_checks && chip->can_sleep);
-+	chip->set(chip, gpio - chip->base, value);
-+}
-+EXPORT_SYMBOL_GPL(__gpio_set_value);
-+
-+/**
-+ * __gpio_cansleep() - report whether gpio value access will sleep
-+ * @gpio: gpio in question
-+ * Context: any
-+ *
-+ * This is used directly or indirectly to implement gpio_cansleep().  It
-+ * returns nonzero if access reading or writing the GPIO value can sleep.
-+ */
-+int __gpio_cansleep(unsigned gpio)
-+{
-+	struct gpio_chip	*chip;
-+
-+	/* only call this on GPIOs that are valid! */
-+	chip = gpio_to_chip(gpio);
-+
-+	return chip->can_sleep;
-+}
-+EXPORT_SYMBOL_GPL(__gpio_cansleep);
-+
-+
-+
-+/* There's no value in making it easy to inline GPIO calls that may sleep.
-+ * Common examples include ones connected to I2C or SPI chips.
-+ */
-+
-+int gpio_get_value_cansleep(unsigned gpio)
-+{
-+	struct gpio_chip	*chip;
-+
-+	might_sleep_if(extra_checks);
-+	chip = gpio_to_chip(gpio);
-+	return chip->get(chip, gpio - chip->base);
-+}
-+EXPORT_SYMBOL_GPL(gpio_get_value_cansleep);
-+
-+void gpio_set_value_cansleep(unsigned gpio, int value)
-+{
-+	struct gpio_chip	*chip;
-+
-+	might_sleep_if(extra_checks);
-+	chip = gpio_to_chip(gpio);
-+	chip->set(chip, gpio - chip->base, value);
-+}
-+EXPORT_SYMBOL_GPL(gpio_set_value_cansleep);
-+
-+
-+#ifdef CONFIG_DEBUG_FS
-+
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+
-+
-+static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-+{
-+	unsigned		i;
-+	unsigned		gpio = chip->base;
-+	struct gpio_desc	*gdesc = &gpio_desc[gpio];
-+	int			is_out;
-+
-+	for (i = 0; i < chip->ngpio; i++, gpio++, gdesc++) {
-+		if (!test_bit(FLAG_REQUESTED, &gdesc->flags))
-+			continue;
-+
-+		is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
-+		seq_printf(s, " gpio-%-3d (%-12s) %s %s",
-+			gpio, gdesc->label,
-+			is_out ? "out" : "in ",
-+			chip->get
-+				? (chip->get(chip, i) ? "hi" : "lo")
-+				: "?  ");
-+
-+		if (!is_out) {
-+			int		irq = gpio_to_irq(gpio);
-+			struct irq_desc	*desc = irq_desc + irq;
-+
-+			/* This races with request_irq(), set_irq_type(),
-+			 * and set_irq_wake() ... but those are "rare".
-+			 *
-+			 * More significantly, trigger type flags aren't
-+			 * currently maintained by genirq.
-+			 */
-+			if (irq >= 0 && desc->action) {
-+				char *trigger;
-+
-+				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
-+				case IRQ_TYPE_NONE:
-+					trigger = "(default)";
-+					break;
-+				case IRQ_TYPE_EDGE_FALLING:
-+					trigger = "edge-falling";
-+					break;
-+				case IRQ_TYPE_EDGE_RISING:
-+					trigger = "edge-rising";
-+					break;
-+				case IRQ_TYPE_EDGE_BOTH:
-+					trigger = "edge-both";
-+					break;
-+				case IRQ_TYPE_LEVEL_HIGH:
-+					trigger = "level-high";
-+					break;
-+				case IRQ_TYPE_LEVEL_LOW:
-+					trigger = "level-low";
-+					break;
-+				default:
-+					trigger = "?trigger?";
-+					break;
-+				}
-+
-+				seq_printf(s, " irq-%d %s%s",
-+					irq, trigger,
-+					(desc->status & IRQ_WAKEUP)
-+						? " wakeup" : "");
-+			}
-+		}
-+
-+		seq_printf(s, "\n");
-+	}
-+}
-+
-+static int gpiolib_show(struct seq_file *s, void *unused)
-+{
-+	struct gpio_chip	*chip = NULL;
-+	unsigned		gpio;
-+	int			started = 0;
-+
-+	/* REVISIT this isn't locked against gpio_chip removal ... */
-+
-+	for (gpio = 0; gpio < ARCH_NR_GPIOS; gpio++) {
-+		if (chip == gpio_desc[gpio].chip)
-+			continue;
-+		chip = gpio_desc[gpio].chip;
-+		if (!chip)
-+			continue;
-+
-+		seq_printf(s, "%sGPIOs %d-%d, %s%s:\n",
-+				started ? "\n" : "",
-+				chip->base, chip->base + chip->ngpio - 1,
-+				chip->label ? : "generic",
-+				chip->can_sleep ? ", can sleep" : "");
-+		started = 1;
-+		if (chip->dbg_show)
-+			chip->dbg_show(s, chip);
-+		else
-+			gpiolib_dbg_show(s, chip);
-+	}
-+	return 0;
-+}
-+
-+static int gpiolib_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, gpiolib_show, NULL);
-+}
-+
-+static struct file_operations gpiolib_operations = {
-+	.open		= gpiolib_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+
-+static int __init gpiolib_debugfs_init(void)
-+{
-+	/* /sys/kernel/debug/gpio */
-+	(void) debugfs_create_file("gpio", S_IFREG | S_IRUGO,
-+				NULL, NULL, &gpiolib_operations);
-+	return 0;
-+}
-+subsys_initcall(gpiolib_debugfs_init);
-+
-+#endif	/* DEBUG_FS */
-diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
-index 2d0aab1..f29a502 100644
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -1,6 +1,102 @@
- #ifndef _ASM_GENERIC_GPIO_H
- #define _ASM_GENERIC_GPIO_H
- 
-+#ifdef CONFIG_HAVE_GPIO_LIB
-+
-+/* Platforms may implement their GPIO interface with library code,
-+ * at a small performance cost for non-inlined operations and some
-+ * extra memory (for code and for per-GPIO table entries).
-+ *
-+ * While the GPIO programming interface defines valid GPIO numbers
-+ * to be in the range 0..MAX_INT, this library restricts them to the
-+ * smaller range 0..ARCH_NR_GPIOS.
-+ */
-+
-+#ifndef ARCH_NR_GPIOS
-+#define ARCH_NR_GPIOS		256
-+#endif
-+
-+struct seq_file;
-+
-+/**
-+ * struct gpio_chip - abstract a GPIO controller
-+ * @label: for diagnostics
-+ * @direction_input: configures signal "offset" as input, or returns error
-+ * @get: returns value for signal "offset"; for output signals this
-+ *	returns either the value actually sensed, or zero
-+ * @direction_output: configures signal "offset" as output, or returns error
-+ * @set: assigns output value for signal "offset"
-+ * @dbg_show: optional routine to show contents in debugfs; default code
-+ *	will be used when this is omitted, but custom code can show extra
-+ *	state (such as pullup/pulldown configuration).
-+ * @base: identifies the first GPIO number handled by this chip; or, if
-+ *	negative during registration, requests dynamic ID allocation.
-+ * @ngpio: the number of GPIOs handled by this controller; the last GPIO
-+ *	handled is (base + ngpio - 1).
-+ * @can_sleep: flag must be set iff get()/set() methods sleep, as they
-+ *	must while accessing GPIO expander chips over I2C or SPI
-+ *
-+ * A gpio_chip can help platforms abstract various sources of GPIOs so
-+ * they can all be accessed through a common programing interface.
-+ * Example sources would be SOC controllers, FPGAs, multifunction
-+ * chips, dedicated GPIO expanders, and so on.
-+ *
-+ * Each chip controls a number of signals, identified in method calls
-+ * by "offset" values in the range 0..(@ngpio - 1).  When those signals
-+ * are referenced through calls like gpio_get_value(gpio), the offset
-+ * is calculated by subtracting @base from the gpio number.
-+ */
-+struct gpio_chip {
-+	char			*label;
-+
-+	int			(*direction_input)(struct gpio_chip *chip,
-+						unsigned offset);
-+	int			(*get)(struct gpio_chip *chip,
-+						unsigned offset);
-+	int			(*direction_output)(struct gpio_chip *chip,
-+						unsigned offset, int value);
-+	void			(*set)(struct gpio_chip *chip,
-+						unsigned offset, int value);
-+	void			(*dbg_show)(struct seq_file *s,
-+						struct gpio_chip *chip);
-+	int			base;
-+	u16			ngpio;
-+	unsigned		can_sleep:1;
-+};
-+
-+extern const char *gpiochip_is_requested(struct gpio_chip *chip,
-+			unsigned offset);
-+
-+/* add/remove chips */
-+extern int gpiochip_add(struct gpio_chip *chip);
-+extern int __must_check gpiochip_remove(struct gpio_chip *chip);
-+
-+
-+/* Always use the library code for GPIO management calls,
-+ * or when sleeping may be involved.
-+ */
-+extern int gpio_request(unsigned gpio, const char *label);
-+extern void gpio_free(unsigned gpio);
-+
-+extern int gpio_direction_input(unsigned gpio);
-+extern int gpio_direction_output(unsigned gpio, int value);
-+
-+extern int gpio_get_value_cansleep(unsigned gpio);
-+extern void gpio_set_value_cansleep(unsigned gpio, int value);
-+
-+
-+/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
-+ * the GPIO is constant and refers to some always-present controller,
-+ * giving direct access to chip registers and tight bitbanging loops.
-+ */
-+extern int __gpio_get_value(unsigned gpio);
-+extern void __gpio_set_value(unsigned gpio, int value);
-+
-+extern int __gpio_cansleep(unsigned gpio);
-+
-+
-+#else
-+
- /* platforms that don't directly support access to GPIOs through I2C, SPI,
-  * or other blocking infrastructure can use these wrappers.
-  */
-@@ -22,4 +118,6 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
- 	gpio_set_value(gpio, value);
- }
- 
-+#endif
-+
- #endif /* _ASM_GENERIC_GPIO_H */
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0023-This-adds-gpiolib-support-for-the-PXA-architecture.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0023-This-adds-gpiolib-support-for-the-PXA-architecture.patch
deleted file mode 100644
index 7a37be85cf..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0023-This-adds-gpiolib-support-for-the-PXA-architecture.patch
+++ /dev/null
@@ -1,498 +0,0 @@
-From 49da9bd487e54164a75503e0037a054cce697ed5 Mon Sep 17 00:00:00 2001
-From: Philipp Zabel <philipp.zabel@gmail.com>
-Date: Tue, 12 Feb 2008 04:38:12 +0300
-Subject: [PATCH 23/64] This adds gpiolib support for the PXA architecture:
-   - move all GPIO API functions from generic.c into gpio.c
-   - convert the gpio_get/set_value macros into inline functions
-
-This makes it easier to hook up GPIOs provided by external chips like
-ASICs and CPLDs.
-
-Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
-Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
-Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
-Cc: Jean Delvare <khali@linux-fr.org>
-Cc: Eric Miao <eric.miao@marvell.com>
-Cc: Sam Ravnborg <sam@ravnborg.org>
-Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Cc: Ben Gardner <bgardner@wabtec.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
- arch/arm/Kconfig                    |    1 +
- arch/arm/mach-pxa/Makefile          |    3 +-
- arch/arm/mach-pxa/generic.c         |   93 ----------------
- arch/arm/mach-pxa/generic.h         |    1 +
- arch/arm/mach-pxa/gpio.c            |  197 +++++++++++++++++++++++++++++++++++
- arch/arm/mach-pxa/irq.c             |    2 +
- include/asm-arm/arch-pxa/gpio.h     |   48 ++++-----
- include/asm-arm/arch-pxa/pxa-regs.h |   13 +++
- 8 files changed, 236 insertions(+), 122 deletions(-)
- create mode 100644 arch/arm/mach-pxa/gpio.c
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 06ca241..423e953 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -346,6 +346,7 @@ config ARCH_PXA
- 	select GENERIC_TIME
- 	select GENERIC_CLOCKEVENTS
- 	select TICK_ONESHOT
-+	select HAVE_GPIO_LIB
- 	help
- 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
- 
-diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
-index 4263527..5cb0216 100644
---- a/arch/arm/mach-pxa/Makefile
-+++ b/arch/arm/mach-pxa/Makefile
-@@ -3,7 +3,8 @@
- #
- 
- # Common support (must be linked before board specific support)
--obj-y				+= clock.o generic.o irq.o dma.o time.o
-+obj-y				+= clock.o generic.o irq.o dma.o \
-+				   time.o gpio.o
- obj-$(CONFIG_PXA25x)		+= pxa25x.o
- obj-$(CONFIG_PXA27x)		+= pxa27x.o
- obj-$(CONFIG_PXA3xx)		+= pxa3xx.o mfp.o
-diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
-index 1c34946..6c07292 100644
---- a/arch/arm/mach-pxa/generic.c
-+++ b/arch/arm/mach-pxa/generic.c
-@@ -32,7 +32,6 @@
- #include <asm/mach/map.h>
- 
- #include <asm/arch/pxa-regs.h>
--#include <asm/arch/gpio.h>
- #include <asm/arch/udc.h>
- #include <asm/arch/pxafb.h>
- #include <asm/arch/mmc.h>
-@@ -73,97 +72,6 @@ unsigned int get_memclk_frequency_10khz(void)
- EXPORT_SYMBOL(get_memclk_frequency_10khz);
- 
- /*
-- * Handy function to set GPIO alternate functions
-- */
--int pxa_last_gpio;
--
--int pxa_gpio_mode(int gpio_mode)
--{
--	unsigned long flags;
--	int gpio = gpio_mode & GPIO_MD_MASK_NR;
--	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
--	int gafr;
--
--	if (gpio > pxa_last_gpio)
--		return -EINVAL;
--
--	local_irq_save(flags);
--	if (gpio_mode & GPIO_DFLT_LOW)
--		GPCR(gpio) = GPIO_bit(gpio);
--	else if (gpio_mode & GPIO_DFLT_HIGH)
--		GPSR(gpio) = GPIO_bit(gpio);
--	if (gpio_mode & GPIO_MD_MASK_DIR)
--		GPDR(gpio) |= GPIO_bit(gpio);
--	else
--		GPDR(gpio) &= ~GPIO_bit(gpio);
--	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
--	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
--	local_irq_restore(flags);
--
--	return 0;
--}
--
--EXPORT_SYMBOL(pxa_gpio_mode);
--
--int gpio_direction_input(unsigned gpio)
--{
--	unsigned long flags;
--	u32 mask;
--
--	if (gpio > pxa_last_gpio)
--		return -EINVAL;
--
--	mask = GPIO_bit(gpio);
--	local_irq_save(flags);
--	GPDR(gpio) &= ~mask;
--	local_irq_restore(flags);
--
--	return 0;
--}
--EXPORT_SYMBOL(gpio_direction_input);
--
--int gpio_direction_output(unsigned gpio, int value)
--{
--	unsigned long flags;
--	u32 mask;
--
--	if (gpio > pxa_last_gpio)
--		return -EINVAL;
--
--	mask = GPIO_bit(gpio);
--	local_irq_save(flags);
--	if (value)
--		GPSR(gpio) = mask;
--	else
--		GPCR(gpio) = mask;
--	GPDR(gpio) |= mask;
--	local_irq_restore(flags);
--
--	return 0;
--}
--EXPORT_SYMBOL(gpio_direction_output);
--
--/*
-- * Return GPIO level
-- */
--int pxa_gpio_get_value(unsigned gpio)
--{
--	return __gpio_get_value(gpio);
--}
--
--EXPORT_SYMBOL(pxa_gpio_get_value);
--
--/*
-- * Set output GPIO level
-- */
--void pxa_gpio_set_value(unsigned gpio, int value)
--{
--	__gpio_set_value(gpio, value);
--}
--
--EXPORT_SYMBOL(pxa_gpio_set_value);
--
--/*
-  * Routine to safely enable or disable a clock in the CKEN
-  */
- void __pxa_set_cken(int clock, int enable)
-@@ -178,7 +86,6 @@ void __pxa_set_cken(int clock, int enable)
- 
- 	local_irq_restore(flags);
- }
--
- EXPORT_SYMBOL(__pxa_set_cken);
- 
- /*
-diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
-index b30f240..727a9f5 100644
---- a/arch/arm/mach-pxa/generic.h
-+++ b/arch/arm/mach-pxa/generic.h
-@@ -16,6 +16,7 @@ extern void __init pxa_init_irq_low(void);
- extern void __init pxa_init_irq_high(void);
- extern void __init pxa_init_irq_gpio(int gpio_nr);
- extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
-+extern void __init pxa_init_gpio(int gpio_nr);
- extern void __init pxa25x_init_irq(void);
- extern void __init pxa27x_init_irq(void);
- extern void __init pxa3xx_init_irq(void);
-diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
-new file mode 100644
-index 0000000..8638dd7
---- /dev/null
-+++ b/arch/arm/mach-pxa/gpio.c
-@@ -0,0 +1,197 @@
-+/*
-+ *  linux/arch/arm/mach-pxa/gpio.c
-+ *
-+ *  Generic PXA GPIO handling
-+ *
-+ *  Author:	Nicolas Pitre
-+ *  Created:	Jun 15, 2001
-+ *  Copyright:	MontaVista Software Inc.
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#include "generic.h"
-+
-+
-+struct pxa_gpio_chip {
-+	struct gpio_chip chip;
-+	void __iomem     *regbase;
-+};
-+
-+int pxa_last_gpio;
-+
-+/*
-+ * Configure pins for GPIO or other functions
-+ */
-+int pxa_gpio_mode(int gpio_mode)
-+{
-+	unsigned long flags;
-+	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-+	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-+	int gafr;
-+
-+	if (gpio > pxa_last_gpio)
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+	if (gpio_mode & GPIO_DFLT_LOW)
-+		GPCR(gpio) = GPIO_bit(gpio);
-+	else if (gpio_mode & GPIO_DFLT_HIGH)
-+		GPSR(gpio) = GPIO_bit(gpio);
-+	if (gpio_mode & GPIO_MD_MASK_DIR)
-+		GPDR(gpio) |= GPIO_bit(gpio);
-+	else
-+		GPDR(gpio) &= ~GPIO_bit(gpio);
-+	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-+	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-+	local_irq_restore(flags);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(pxa_gpio_mode);
-+
-+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+	unsigned long        flags;
-+	u32                  mask = 1 << offset;
-+	u32                  value;
-+	struct pxa_gpio_chip *pxa;
-+	void __iomem         *gpdr;
-+
-+	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-+	gpdr = pxa->regbase + GPDR_OFFSET;
-+	local_irq_save(flags);
-+	value = __raw_readl(gpdr);
-+	value &= ~mask;
-+	__raw_writel(value, gpdr);
-+	local_irq_restore(flags);
-+
-+	return 0;
-+}
-+
-+static int pxa_gpio_direction_output(struct gpio_chip *chip,
-+					unsigned offset, int value)
-+{
-+	unsigned long        flags;
-+	u32                  mask = 1 << offset;
-+	u32                  tmp;
-+	struct pxa_gpio_chip *pxa;
-+	void __iomem         *gpdr;
-+
-+	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-+	__raw_writel(mask,
-+			pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET));
-+	gpdr = pxa->regbase + GPDR_OFFSET;
-+	local_irq_save(flags);
-+	tmp = __raw_readl(gpdr);
-+	tmp |= mask;
-+	__raw_writel(tmp, gpdr);
-+	local_irq_restore(flags);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Return GPIO level
-+ */
-+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+	u32                  mask = 1 << offset;
-+	struct pxa_gpio_chip *pxa;
-+
-+	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-+	return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask;
-+}
-+
-+/*
-+ * Set output GPIO level
-+ */
-+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+	u32                  mask = 1 << offset;
-+	struct pxa_gpio_chip *pxa;
-+
-+	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-+
-+	if (value)
-+		__raw_writel(mask, pxa->regbase + GPSR_OFFSET);
-+	else
-+		__raw_writel(mask, pxa->regbase + GPCR_OFFSET);
-+}
-+
-+static struct pxa_gpio_chip pxa_gpio_chip[] = {
-+	[0] = {
-+		.regbase = GPIO0_BASE,
-+		.chip = {
-+			.label            = "gpio-0",
-+			.direction_input  = pxa_gpio_direction_input,
-+			.direction_output = pxa_gpio_direction_output,
-+			.get              = pxa_gpio_get,
-+			.set              = pxa_gpio_set,
-+			.base             = 0,
-+			.ngpio            = 32,
-+		},
-+	},
-+	[1] = {
-+		.regbase = GPIO1_BASE,
-+		.chip = {
-+			.label            = "gpio-1",
-+			.direction_input  = pxa_gpio_direction_input,
-+			.direction_output = pxa_gpio_direction_output,
-+			.get              = pxa_gpio_get,
-+			.set              = pxa_gpio_set,
-+			.base             = 32,
-+			.ngpio            = 32,
-+		},
-+	},
-+	[2] = {
-+		.regbase = GPIO2_BASE,
-+		.chip = {
-+			.label            = "gpio-2",
-+			.direction_input  = pxa_gpio_direction_input,
-+			.direction_output = pxa_gpio_direction_output,
-+			.get              = pxa_gpio_get,
-+			.set              = pxa_gpio_set,
-+			.base             = 64,
-+			.ngpio            = 32, /* 21 for PXA25x */
-+		},
-+	},
-+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-+	[3] = {
-+		.regbase = GPIO3_BASE,
-+		.chip = {
-+			.label            = "gpio-3",
-+			.direction_input  = pxa_gpio_direction_input,
-+			.direction_output = pxa_gpio_direction_output,
-+			.get              = pxa_gpio_get,
-+			.set              = pxa_gpio_set,
-+			.base             = 96,
-+			.ngpio            = 32,
-+		},
-+	},
-+#endif
-+};
-+
-+void __init pxa_init_gpio(int gpio_nr)
-+{
-+	int i;
-+
-+	/* add a GPIO chip for each register bank.
-+	 * the last PXA25x register only contains 21 GPIOs
-+	 */
-+	for (i = 0; i < gpio_nr; i += 32) {
-+		if (i+32 > gpio_nr)
-+			pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i;
-+		gpiochip_add(&pxa_gpio_chip[i/32].chip);
-+	}
-+}
-diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
-index 07acb45..d0965ef 100644
---- a/arch/arm/mach-pxa/irq.c
-+++ b/arch/arm/mach-pxa/irq.c
-@@ -310,6 +310,8 @@ void __init pxa_init_irq_gpio(int gpio_nr)
- 	/* Install handler for GPIO>=2 edge detect interrupts */
- 	set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
- 	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
-+
-+	pxa_init_gpio(gpio_nr);
- }
- 
- void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
-diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h
-index 9dbc2dc..bdbf5f9 100644
---- a/include/asm-arm/arch-pxa/gpio.h
-+++ b/include/asm-arm/arch-pxa/gpio.h
-@@ -28,43 +28,35 @@
- #include <asm/irq.h>
- #include <asm/hardware.h>
- 
--static inline int gpio_request(unsigned gpio, const char *label)
--{
--	return 0;
--}
-+#include <asm-generic/gpio.h>
- 
--static inline void gpio_free(unsigned gpio)
--{
--	return;
--}
- 
--extern int gpio_direction_input(unsigned gpio);
--extern int gpio_direction_output(unsigned gpio, int value);
-+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
-+ * Those cases currently cause holes in the GPIO number space.
-+ */
-+#define NR_BUILTIN_GPIO 128
- 
--static inline int __gpio_get_value(unsigned gpio)
-+static inline int gpio_get_value(unsigned gpio)
- {
--	return GPLR(gpio) & GPIO_bit(gpio);
-+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
-+		return GPLR(gpio) & GPIO_bit(gpio);
-+	else
-+		return __gpio_get_value(gpio);
- }
- 
--#define gpio_get_value(gpio)			\
--	(__builtin_constant_p(gpio) ?		\
--	 __gpio_get_value(gpio) :		\
--	 pxa_gpio_get_value(gpio))
--
--static inline void __gpio_set_value(unsigned gpio, int value)
-+static inline void gpio_set_value(unsigned gpio, int value)
- {
--	if (value)
--		GPSR(gpio) = GPIO_bit(gpio);
--	else
--		GPCR(gpio) = GPIO_bit(gpio);
-+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
-+		if (value)
-+			GPSR(gpio) = GPIO_bit(gpio);
-+		else
-+			GPCR(gpio) = GPIO_bit(gpio);
-+	} else {
-+		__gpio_set_value(gpio, value);
-+	}
- }
- 
--#define gpio_set_value(gpio,value)		\
--	(__builtin_constant_p(gpio) ?		\
--	 __gpio_set_value(gpio, value) :	\
--	 pxa_gpio_set_value(gpio, value))
--
--#include <asm-generic/gpio.h>			/* cansleep wrappers */
-+#define gpio_cansleep __gpio_cansleep
- 
- #define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
- #define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
-diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
-index 1bd398d..bd57417 100644
---- a/include/asm-arm/arch-pxa/pxa-regs.h
-+++ b/include/asm-arm/arch-pxa/pxa-regs.h
-@@ -1131,6 +1131,19 @@
-  * General Purpose I/O
-  */
- 
-+#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
-+#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
-+#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
-+#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
-+
-+#define GPLR_OFFSET	0x00
-+#define GPDR_OFFSET	0x0C
-+#define GPSR_OFFSET	0x18
-+#define GPCR_OFFSET	0x24
-+#define GRER_OFFSET	0x30
-+#define GFER_OFFSET	0x3C
-+#define GEDR_OFFSET	0x48
-+
- #define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
- #define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
- #define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0024-Update-Documentation-gpio.txt-primarily-to-include.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0024-Update-Documentation-gpio.txt-primarily-to-include.patch
deleted file mode 100644
index e460379de6..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0024-Update-Documentation-gpio.txt-primarily-to-include.patch
+++ /dev/null
@@ -1,238 +0,0 @@
-From 7ba82399f2d2df6114ad552999f2e1b9a19cb47a Mon Sep 17 00:00:00 2001
-From: David Brownell <dbrownell@users.sourceforge.net>
-Date: Sat, 19 Jan 2008 19:41:18 +0300
-Subject: [PATCH 24/64] Update Documentation/gpio.txt, primarily to include the new "gpiolib"
- infrastructure.
-
-Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
-Cc: Jean Delvare <khali@linux-fr.org>
-Cc: Eric Miao <eric.miao@marvell.com>
-Cc: Sam Ravnborg <sam@ravnborg.org>
-Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Cc: Philipp Zabel <philipp.zabel@gmail.com>
-Cc: Russell King <rmk@arm.linux.org.uk>
-Cc: Ben Gardner <bgardner@wabtec.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
- Documentation/gpio.txt |  133 +++++++++++++++++++++++++++++++++++++++++++----
- 1 files changed, 121 insertions(+), 12 deletions(-)
-
-diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
-index 6bc2ba2..8da724e 100644
---- a/Documentation/gpio.txt
-+++ b/Documentation/gpio.txt
-@@ -32,7 +32,7 @@ The exact capabilities of GPIOs vary between systems.  Common options:
-   - Input values are likewise readable (1, 0).  Some chips support readback
-     of pins configured as "output", which is very useful in such "wire-OR"
-     cases (to support bidirectional signaling).  GPIO controllers may have
--    input de-glitch logic, sometimes with software controls.
-+    input de-glitch/debounce logic, sometimes with software controls.
- 
-   - Inputs can often be used as IRQ signals, often edge triggered but
-     sometimes level triggered.  Such IRQs may be configurable as system
-@@ -60,10 +60,13 @@ used on a board that's wired differently.  Only least-common-denominator
- functionality can be very portable.  Other features are platform-specific,
- and that can be critical for glue logic.
- 
--Plus, this doesn't define an implementation framework, just an interface.
-+Plus, this doesn't require any implementation framework, just an interface.
- One platform might implement it as simple inline functions accessing chip
- registers; another might implement it by delegating through abstractions
--used for several very different kinds of GPIO controller.
-+used for several very different kinds of GPIO controller.  (There is some
-+optional code supporting such an implementation strategy, described later
-+in this document, but drivers acting as clients to the GPIO interface must
-+not care how it's implemented.)
- 
- That said, if the convention is supported on their platform, drivers should
- use it when possible.  Platforms should declare GENERIC_GPIO support in
-@@ -121,6 +124,11 @@ before tasking is enabled, as part of early board setup.
- For output GPIOs, the value provided becomes the initial output value.
- This helps avoid signal glitching during system startup.
- 
-+For compatibility with legacy interfaces to GPIOs, setting the direction
-+of a GPIO implicitly requests that GPIO (see below) if it has not been
-+requested already.  That compatibility may be removed in the future;
-+explicitly requesting GPIOs is strongly preferred.
-+
- Setting the direction can fail if the GPIO number is invalid, or when
- that particular GPIO can't be used in that mode.  It's generally a bad
- idea to rely on boot firmware to have set the direction correctly, since
-@@ -133,6 +141,7 @@ Spinlock-Safe GPIO access
- -------------------------
- Most GPIO controllers can be accessed with memory read/write instructions.
- That doesn't need to sleep, and can safely be done from inside IRQ handlers.
-+(That includes hardirq contexts on RT kernels.)
- 
- Use these calls to access such GPIOs:
- 
-@@ -145,7 +154,7 @@ Use these calls to access such GPIOs:
- The values are boolean, zero for low, nonzero for high.  When reading the
- value of an output pin, the value returned should be what's seen on the
- pin ... that won't always match the specified output value, because of
--issues including wire-OR and output latencies.
-+issues including open-drain signaling and output latencies.
- 
- The get/set calls have no error returns because "invalid GPIO" should have
- been reported earlier from gpio_direction_*().  However, note that not all
-@@ -170,7 +179,8 @@ get to the head of a queue to transmit a command and get its response.
- This requires sleeping, which can't be done from inside IRQ handlers.
- 
- Platforms that support this type of GPIO distinguish them from other GPIOs
--by returning nonzero from this call:
-+by returning nonzero from this call (which requires a valid GPIO number,
-+either explicitly or implicitly requested):
- 
- 	int gpio_cansleep(unsigned gpio);
- 
-@@ -209,8 +219,11 @@ before tasking is enabled, as part of early board setup.
- These calls serve two basic purposes.  One is marking the signals which
- are actually in use as GPIOs, for better diagnostics; systems may have
- several hundred potential GPIOs, but often only a dozen are used on any
--given board.  Another is to catch conflicts between drivers, reporting
--errors when drivers wrongly think they have exclusive use of that signal.
-+given board.  Another is to catch conflicts, identifying errors when
-+(a) two or more drivers wrongly think they have exclusive use of that
-+signal, or (b) something wrongly believes it's safe to remove drivers
-+needed to manage a signal that's in active use.  That is, requesting a
-+GPIO can serve as a kind of lock.
- 
- These two calls are optional because not not all current Linux platforms
- offer such functionality in their GPIO support; a valid implementation
-@@ -223,6 +236,9 @@ Note that requesting a GPIO does NOT cause it to be configured in any
- way; it just marks that GPIO as in use.  Separate code must handle any
- pin setup (e.g. controlling which pin the GPIO uses, pullup/pulldown).
- 
-+Also note that it's your responsibility to have stopped using a GPIO
-+before you free it.
-+
- 
- GPIOs mapped to IRQs
- --------------------
-@@ -238,7 +254,7 @@ map between them using calls like:
- 
- Those return either the corresponding number in the other namespace, or
- else a negative errno code if the mapping can't be done.  (For example,
--some GPIOs can't used as IRQs.)  It is an unchecked error to use a GPIO
-+some GPIOs can't be used as IRQs.)  It is an unchecked error to use a GPIO
- number that wasn't set up as an input using gpio_direction_input(), or
- to use an IRQ number that didn't originally come from gpio_to_irq().
- 
-@@ -299,17 +315,110 @@ Related to multiplexing is configuration and enabling of the pullups or
- pulldowns integrated on some platforms.  Not all platforms support them,
- or support them in the same way; and any given board might use external
- pullups (or pulldowns) so that the on-chip ones should not be used.
-+(When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.)
- 
- There are other system-specific mechanisms that are not specified here,
- like the aforementioned options for input de-glitching and wire-OR output.
- Hardware may support reading or writing GPIOs in gangs, but that's usually
- configuration dependent:  for GPIOs sharing the same bank.  (GPIOs are
- commonly grouped in banks of 16 or 32, with a given SOC having several such
--banks.)  Some systems can trigger IRQs from output GPIOs.  Code relying on
--such mechanisms will necessarily be nonportable.
-+banks.)  Some systems can trigger IRQs from output GPIOs, or read values
-+from pins not managed as GPIOs.  Code relying on such mechanisms will
-+necessarily be nonportable.
- 
--Dynamic definition of GPIOs is not currently supported; for example, as
-+Dynamic definition of GPIOs is not currently standard; for example, as
- a side effect of configuring an add-on board with some GPIO expanders.
- 
- These calls are purely for kernel space, but a userspace API could be built
--on top of it.
-+on top of them.
-+
-+
-+GPIO implementor's framework (OPTIONAL)
-+=======================================
-+As noted earlier, there is an optional implementation framework making it
-+easier for platforms to support different kinds of GPIO controller using
-+the same programming interface.
-+
-+As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file
-+will be found there.  That will list all the controllers registered through
-+this framework, and the state of the GPIOs currently in use.
-+
-+
-+Controller Drivers: gpio_chip
-+-----------------------------
-+In this framework each GPIO controller is packaged as a "struct gpio_chip"
-+with information common to each controller of that type:
-+
-+ - methods to establish GPIO direction
-+ - methods used to access GPIO values
-+ - flag saying whether calls to its methods may sleep
-+ - optional debugfs dump method (showing extra state like pullup config)
-+ - label for diagnostics
-+
-+There is also per-instance data, which may come from device.platform_data:
-+the number of its first GPIO, and how many GPIOs it exposes.
-+
-+The code implementing a gpio_chip should support multiple instances of the
-+controller, possibly using the driver model.  That code will configure each
-+gpio_chip and issue gpiochip_add().  Removing a GPIO controller should be
-+rare; use gpiochip_remove() when it is unavoidable.
-+
-+Most often a gpio_chip is part of an instance-specific structure with state
-+not exposed by the GPIO interfaces, such as addressing, power management,
-+and more.  Chips such as codecs will have complex non-GPIO state,
-+
-+Any debugfs dump method should normally ignore signals which haven't been
-+requested as GPIOs.  They can use gpiochip_is_requested(), which returns
-+either NULL or the label associated with that GPIO when it was requested.
-+
-+
-+Platform Support
-+----------------
-+To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB"
-+and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
-+three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
-+They may also want to provide a custom value for ARCH_NR_GPIOS.
-+
-+Trivial implementations of those functions can directly use framework
-+code, which always dispatches through the gpio_chip:
-+
-+  #define gpio_get_value	__gpio_get_value
-+  #define gpio_set_value	__gpio_set_value
-+  #define gpio_cansleep		__gpio_cansleep
-+
-+Fancier implementations could instead define those as inline functions with
-+logic optimizing access to specific SOC-based GPIOs.  For example, if the
-+referenced GPIO is the constant "12", getting or setting its value could
-+cost as little as two or three instructions, never sleeping.  When such an
-+optimization is not possible those calls must delegate to the framework
-+code, costing at least a few dozen instructions.  For bitbanged I/O, such
-+instruction savings can be significant.
-+
-+For SOCs, platform-specific code defines and registers gpio_chip instances
-+for each bank of on-chip GPIOs.  Those GPIOs should be numbered/labeled to
-+match chip vendor documentation, and directly match board schematics.  They
-+may well start at zero and go up to a platform-specific limit.  Such GPIOs
-+are normally integrated into platform initialization to make them always be
-+available, from arch_initcall() or earlier; they can often serve as IRQs.
-+
-+
-+Board Support
-+-------------
-+For external GPIO controllers -- such as I2C or SPI expanders, ASICs, multi
-+function devices, FPGAs or CPLDs -- most often board-specific code handles
-+registering controller devices and ensures that their drivers know what GPIO
-+numbers to use with gpiochip_add().  Their numbers often start right after
-+platform-specific GPIOs.
-+
-+For example, board setup code could create structures identifying the range
-+of GPIOs that chip will expose, and passes them to each GPIO expander chip
-+using platform_data.  Then the chip driver's probe() routine could pass that
-+data to gpiochip_add().
-+
-+Initialization order can be important.  For example, when a device relies on
-+an I2C-based GPIO, its probe() routine should only be called after that GPIO
-+becomes available.  That may mean the device should not be registered until
-+calls for that GPIO can work.  One way to address such dependencies is for
-+such gpio_chip controllers to provide setup() and teardown() callbacks to
-+board specific code; those board specific callbacks would register devices
-+once all the necessary resources are available.
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0025-Signed-off-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0025-Signed-off-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch
deleted file mode 100644
index 84d0fd3e19..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0025-Signed-off-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch
+++ /dev/null
@@ -1,434 +0,0 @@
-From 39717c1328f6aa13330eded0e0e268993cfd1eea Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Tue, 12 Feb 2008 10:39:53 +0300
-Subject: [PATCH 25/64] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
-
----
- arch/arm/mach-pxa/Makefile  |    2 +-
- arch/arm/mach-pxa/devices.c |  401 +++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 402 insertions(+), 1 deletions(-)
- create mode 100644 arch/arm/mach-pxa/devices.c
-
-diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
-index 5cb0216..f276d24 100644
---- a/arch/arm/mach-pxa/Makefile
-+++ b/arch/arm/mach-pxa/Makefile
-@@ -4,7 +4,7 @@
- 
- # Common support (must be linked before board specific support)
- obj-y				+= clock.o generic.o irq.o dma.o \
--				   time.o gpio.o
-+				   time.o gpio.o devices.o
- obj-$(CONFIG_PXA25x)		+= pxa25x.o
- obj-$(CONFIG_PXA27x)		+= pxa27x.o
- obj-$(CONFIG_PXA3xx)		+= pxa3xx.o mfp.o
-diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
-new file mode 100644
-index 0000000..928131a
---- /dev/null
-+++ b/arch/arm/mach-pxa/devices.c
-@@ -0,0 +1,401 @@
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/udc.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/mmc.h>
-+#include <asm/arch/irda.h>
-+#include <asm/arch/i2c.h>
-+#include <asm/arch/ohci.h>
-+
-+#include "devices.h"
-+
-+#ifdef CONFIG_PXA25x
-+
-+static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
-+
-+static struct resource pxa25x_resource_ssp[] = {
-+	[0] = {
-+		.start	= 0x41000000,
-+		.end	= 0x4100001f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_SSP,
-+		.end	= IRQ_SSP,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		/* DRCMR for RX */
-+		.start	= 13,
-+		.end	= 13,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		/* DRCMR for TX */
-+		.start	= 14,
-+		.end	= 14,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa25x_device_ssp = {
-+	.name		= "pxa25x-ssp",
-+	.id		= 0,
-+	.dev		= {
-+		.dma_mask = &pxa25x_ssp_dma_mask,
-+		.coherent_dma_mask = DMA_BIT_MASK(32),
-+	},
-+	.resource	= pxa25x_resource_ssp,
-+	.num_resources	= ARRAY_SIZE(pxa25x_resource_ssp),
-+};
-+
-+static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
-+
-+static struct resource pxa25x_resource_nssp[] = {
-+	[0] = {
-+		.start	= 0x41400000,
-+		.end	= 0x4140002f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_NSSP,
-+		.end	= IRQ_NSSP,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		/* DRCMR for RX */
-+		.start	= 15,
-+		.end	= 15,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		/* DRCMR for TX */
-+		.start	= 16,
-+		.end	= 16,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa25x_device_nssp = {
-+	.name		= "pxa25x-nssp",
-+	.id		= 1,
-+	.dev		= {
-+		.dma_mask = &pxa25x_nssp_dma_mask,
-+		.coherent_dma_mask = DMA_BIT_MASK(32),
-+	},
-+	.resource	= pxa25x_resource_nssp,
-+	.num_resources	= ARRAY_SIZE(pxa25x_resource_nssp),
-+};
-+
-+static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
-+
-+static struct resource pxa25x_resource_assp[] = {
-+	[0] = {
-+		.start	= 0x41500000,
-+		.end	= 0x4150002f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_ASSP,
-+		.end	= IRQ_ASSP,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		/* DRCMR for RX */
-+		.start	= 23,
-+		.end	= 23,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		/* DRCMR for TX */
-+		.start	= 24,
-+		.end	= 24,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa25x_device_assp = {
-+	/* ASSP is basically equivalent to NSSP */
-+	.name		= "pxa25x-nssp",
-+	.id		= 2,
-+	.dev		= {
-+		.dma_mask = &pxa25x_assp_dma_mask,
-+		.coherent_dma_mask = DMA_BIT_MASK(32),
-+	},
-+	.resource	= pxa25x_resource_assp,
-+	.num_resources	= ARRAY_SIZE(pxa25x_resource_assp),
-+};
-+#endif /* CONFIG_PXA25x */
-+
-+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-+
-+static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
-+
-+static struct resource pxa27x_resource_ohci[] = {
-+	[0] = {
-+		.start  = 0x4C000000,
-+		.end    = 0x4C00ff6f,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = IRQ_USBH1,
-+		.end    = IRQ_USBH1,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device pxa27x_device_ohci = {
-+	.name		= "pxa27x-ohci",
-+	.id		= -1,
-+	.dev		= {
-+		.dma_mask = &pxa27x_ohci_dma_mask,
-+		.coherent_dma_mask = DMA_BIT_MASK(32),
-+	},
-+	.num_resources  = ARRAY_SIZE(pxa27x_resource_ohci),
-+	.resource       = pxa27x_resource_ohci,
-+};
-+
-+void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
-+{
-+	pxa_register_device(&pxa27x_device_ohci, info);
-+}
-+
-+static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
-+
-+static struct resource pxa27x_resource_ssp1[] = {
-+	[0] = {
-+		.start	= 0x41000000,
-+		.end	= 0x4100003f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_SSP,
-+		.end	= IRQ_SSP,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		/* DRCMR for RX */
-+		.start	= 13,
-+		.end	= 13,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		/* DRCMR for TX */
-+		.start	= 14,
-+		.end	= 14,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa27x_device_ssp1 = {
-+	.name		= "pxa27x-ssp",
-+	.id		= 0,
-+	.dev		= {
-+		.dma_mask = &pxa27x_ssp1_dma_mask,
-+		.coherent_dma_mask = DMA_BIT_MASK(32),
-+	},
-+	.resource	= pxa27x_resource_ssp1,
-+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
-+};
-+
-+static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
-+
-+static struct resource pxa27x_resource_ssp2[] = {
-+	[0] = {
-+		.start	= 0x41700000,
-+		.end	= 0x4170003f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_SSP2,
-+		.end	= IRQ_SSP2,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		/* DRCMR for RX */
-+		.start	= 15,
-+		.end	= 15,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		/* DRCMR for TX */
-+		.start	= 16,
-+		.end	= 16,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa27x_device_ssp2 = {
-+	.name		= "pxa27x-ssp",
-+	.id		= 1,
-+	.dev		= {
-+		.dma_mask = &pxa27x_ssp2_dma_mask,
-+		.coherent_dma_mask = DMA_BIT_MASK(32),
-+	},
-+	.resource	= pxa27x_resource_ssp2,
-+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
-+};
-+
-+static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
-+
-+static struct resource pxa27x_resource_ssp3[] = {
-+	[0] = {
-+		.start	= 0x41900000,
-+		.end	= 0x4190003f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_SSP3,
-+		.end	= IRQ_SSP3,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		/* DRCMR for RX */
-+		.start	= 66,
-+		.end	= 66,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		/* DRCMR for TX */
-+		.start	= 67,
-+		.end	= 67,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa27x_device_ssp3 = {
-+	.name		= "pxa27x-ssp",
-+	.id		= 2,
-+	.dev		= {
-+		.dma_mask = &pxa27x_ssp3_dma_mask,
-+		.coherent_dma_mask = DMA_BIT_MASK(32),
-+	},
-+	.resource	= pxa27x_resource_ssp3,
-+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
-+};
-+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-+
-+#ifdef CONFIG_PXA3xx
-+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-+
-+static struct resource pxa3xx_resource_ssp4[] = {
-+	[0] = {
-+		.start	= 0x41a00000,
-+		.end	= 0x41a0003f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_SSP4,
-+		.end	= IRQ_SSP4,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		/* DRCMR for RX */
-+		.start	= 2,
-+		.end	= 2,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		/* DRCMR for TX */
-+		.start	= 3,
-+		.end	= 3,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa3xx_device_ssp4 = {
-+	/* PXA3xx SSP is basically equivalent to PXA27x */
-+	.name		= "pxa27x-ssp",
-+	.id		= 3,
-+	.dev		= {
-+		.dma_mask = &pxa3xx_ssp4_dma_mask,
-+		.coherent_dma_mask = DMA_BIT_MASK(32),
-+	},
-+	.resource	= pxa3xx_resource_ssp4,
-+	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
-+};
-+
-+static struct resource pxa3xx_resources_mci2[] = {
-+	[0] = {
-+		.start	= 0x42000000,
-+		.end	= 0x42000fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_MMC2,
-+		.end	= IRQ_MMC2,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start	= 93,
-+		.end	= 93,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		.start	= 94,
-+		.end	= 94,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa3xx_device_mci2 = {
-+	.name		= "pxa2xx-mci",
-+	.id		= 1,
-+	.dev		= {
-+		.dma_mask = &pxamci_dmamask,
-+		.coherent_dma_mask =	0xffffffff,
-+	},
-+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci2),
-+	.resource	= pxa3xx_resources_mci2,
-+};
-+
-+void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
-+{
-+	pxa_register_device(&pxa3xx_device_mci2, info);
-+}
-+
-+static struct resource pxa3xx_resources_mci3[] = {
-+	[0] = {
-+		.start	= 0x42500000,
-+		.end	= 0x42500fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_MMC3,
-+		.end	= IRQ_MMC3,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start	= 100,
-+		.end	= 100,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+	[3] = {
-+		.start	= 101,
-+		.end	= 101,
-+		.flags	= IORESOURCE_DMA,
-+	},
-+};
-+
-+struct platform_device pxa3xx_device_mci3 = {
-+	.name		= "pxa2xx-mci",
-+	.id		= 2,
-+	.dev		= {
-+		.dma_mask = &pxamci_dmamask,
-+		.coherent_dma_mask = 0xffffffff,
-+	},
-+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci3),
-+	.resource	= pxa3xx_resources_mci3,
-+};
-+
-+void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
-+{
-+	pxa_register_device(&pxa3xx_device_mci3, info);
-+}
-+
-+#endif /* CONFIG_PXA3xx */
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch
deleted file mode 100644
index e1323e4edc..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From cbe46408b666983284e8be290950d526dbc0f0a4 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:08:16 +0300
-Subject: [PATCH 26/64] I don't think we should check for IRQs when determining which one
- of power supplies to register. Better use is_{ac,usb}_online
- callbacks, this will not produce an obstacle to implement polling --
- when irqs aren't mandatory. I'll send my two pending patches to show
- the idea.
-
-For this particular issue, I think something like that should work.
-If it works for you, I'll commit that version, preserving your
-authorship, of course.
----
- drivers/power/pda_power.c |   80 ++++++++++++++++++++++++--------------------
- 1 files changed, 44 insertions(+), 36 deletions(-)
-
-diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
-index c058f28..d98622f 100644
---- a/drivers/power/pda_power.c
-+++ b/drivers/power/pda_power.c
-@@ -168,66 +168,74 @@ static int pda_power_probe(struct platform_device *pdev)
- 		pda_power_supplies[1].num_supplicants = pdata->num_supplicants;
- 	}
- 
--	ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]);
--	if (ret) {
--		dev_err(dev, "failed to register %s power supply\n",
--			pda_power_supplies[0].name);
--		goto supply0_failed;
--	}
-+	if (pdata->is_ac_online) {
-+		ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]);
-+		if (ret) {
-+			dev_err(dev, "failed to register %s power supply\n",
-+				pda_power_supplies[0].name);
-+			goto ac_supply_failed;
-+		}
- 
--	ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]);
--	if (ret) {
--		dev_err(dev, "failed to register %s power supply\n",
--			pda_power_supplies[1].name);
--		goto supply1_failed;
-+		if (ac_irq) {
-+			ret = request_irq(ac_irq->start, power_changed_isr,
-+					  get_irq_flags(ac_irq), ac_irq->name,
-+					  &pda_power_supplies[0]);
-+			if (ret) {
-+				dev_err(dev, "request ac irq failed\n");
-+				goto ac_irq_failed;
-+			}
-+		}
- 	}
- 
--	if (ac_irq) {
--		ret = request_irq(ac_irq->start, power_changed_isr,
--				  get_irq_flags(ac_irq), ac_irq->name,
--				  &pda_power_supplies[0]);
-+	if (pdata->is_usb_online) {
-+		ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]);
- 		if (ret) {
--			dev_err(dev, "request ac irq failed\n");
--			goto ac_irq_failed;
-+			dev_err(dev, "failed to register %s power supply\n",
-+				pda_power_supplies[1].name);
-+			goto usb_supply_failed;
- 		}
--	}
- 
--	if (usb_irq) {
--		ret = request_irq(usb_irq->start, power_changed_isr,
--				  get_irq_flags(usb_irq), usb_irq->name,
--				  &pda_power_supplies[1]);
--		if (ret) {
--			dev_err(dev, "request usb irq failed\n");
--			goto usb_irq_failed;
-+		if (usb_irq) {
-+			ret = request_irq(usb_irq->start, power_changed_isr,
-+					  get_irq_flags(usb_irq),
-+					  usb_irq->name,
-+					  &pda_power_supplies[1]);
-+			if (ret) {
-+				dev_err(dev, "request usb irq failed\n");
-+				goto usb_irq_failed;
-+			}
- 		}
- 	}
- 
--	goto success;
-+	return 0;
- 
- usb_irq_failed:
--	if (ac_irq)
-+	if (pdata->is_usb_online)
-+		power_supply_unregister(&pda_power_supplies[1]);
-+usb_supply_failed:
-+	if (pdata->is_ac_online && ac_irq)
- 		free_irq(ac_irq->start, &pda_power_supplies[0]);
- ac_irq_failed:
--	power_supply_unregister(&pda_power_supplies[1]);
--supply1_failed:
--	power_supply_unregister(&pda_power_supplies[0]);
--supply0_failed:
-+	if (pdata->is_ac_online)
-+		power_supply_unregister(&pda_power_supplies[0]);
-+ac_supply_failed:
- noirqs:
- wrongid:
--success:
- 	return ret;
- }
- 
- static int pda_power_remove(struct platform_device *pdev)
- {
--	if (usb_irq)
-+	if (pdata->is_usb_online && usb_irq)
- 		free_irq(usb_irq->start, &pda_power_supplies[1]);
--	if (ac_irq)
-+	if (pdata->is_ac_online && ac_irq)
- 		free_irq(ac_irq->start, &pda_power_supplies[0]);
- 	del_timer_sync(&charger_timer);
- 	del_timer_sync(&supply_timer);
--	power_supply_unregister(&pda_power_supplies[1]);
--	power_supply_unregister(&pda_power_supplies[0]);
-+	if (pdata->is_usb_online)
-+		power_supply_unregister(&pda_power_supplies[1]);
-+	if (pdata->is_ac_online)
-+		power_supply_unregister(&pda_power_supplies[0]);
- 	return 0;
- }
- 
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch
deleted file mode 100644
index 240d2d0bd9..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From e5e9808fd5ed9cb54dd9da9fb91b32c4f7e9da52 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:08:17 +0300
-Subject: [PATCH 27/64] Add LiMn (one of the most common for small non-rechargable batteries)i
- battery technology and voltage_min/_max properties support.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/power/power_supply_sysfs.c |    5 ++++-
- include/linux/power_supply.h       |    3 +++
- 2 files changed, 7 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
-index 249f61b..45d2f95 100644
---- a/drivers/power/power_supply_sysfs.c
-+++ b/drivers/power/power_supply_sysfs.c
-@@ -46,7 +46,8 @@ static ssize_t power_supply_show_property(struct device *dev,
- 		"Unspecified failure"
- 	};
- 	static char *technology_text[] = {
--		"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd"
-+		"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
-+		"LiMn"
- 	};
- 	static char *capacity_level_text[] = {
- 		"Unknown", "Critical", "Low", "Normal", "High", "Full"
-@@ -88,6 +89,8 @@ static struct device_attribute power_supply_attrs[] = {
- 	POWER_SUPPLY_ATTR(present),
- 	POWER_SUPPLY_ATTR(online),
- 	POWER_SUPPLY_ATTR(technology),
-+	POWER_SUPPLY_ATTR(voltage_max),
-+	POWER_SUPPLY_ATTR(voltage_min),
- 	POWER_SUPPLY_ATTR(voltage_max_design),
- 	POWER_SUPPLY_ATTR(voltage_min_design),
- 	POWER_SUPPLY_ATTR(voltage_now),
-diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
-index 606c095..cdbc5b8 100644
---- a/include/linux/power_supply.h
-+++ b/include/linux/power_supply.h
-@@ -54,6 +54,7 @@ enum {
- 	POWER_SUPPLY_TECHNOLOGY_LIPO,
- 	POWER_SUPPLY_TECHNOLOGY_LiFe,
- 	POWER_SUPPLY_TECHNOLOGY_NiCd,
-+	POWER_SUPPLY_TECHNOLOGY_LiMn,
- };
- 
- enum {
-@@ -72,6 +73,8 @@ enum power_supply_property {
- 	POWER_SUPPLY_PROP_PRESENT,
- 	POWER_SUPPLY_PROP_ONLINE,
- 	POWER_SUPPLY_PROP_TECHNOLOGY,
-+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
-+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
- 	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
- 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
- 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch
deleted file mode 100644
index ac5df97dff..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From df0801d2cd6a7081700c79f437d1185cbe1960a7 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:08:18 +0300
-Subject: [PATCH 28/64] Add suspend/resume/wakeup support for pda_power.
- Now with device_init_wakeup.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/power/pda_power.c |   34 ++++++++++++++++++++++++++++++++++
- 1 files changed, 34 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
-index d98622f..28360e8 100644
---- a/drivers/power/pda_power.c
-+++ b/drivers/power/pda_power.c
-@@ -207,6 +207,8 @@ static int pda_power_probe(struct platform_device *pdev)
- 		}
- 	}
- 
-+	device_init_wakeup(&pdev->dev, 1);
-+
- 	return 0;
- 
- usb_irq_failed:
-@@ -239,12 +241,44 @@ static int pda_power_remove(struct platform_device *pdev)
- 	return 0;
- }
- 
-+#ifdef CONFIG_PM
-+static int pda_power_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	if (device_may_wakeup(&pdev->dev)) {
-+		if (ac_irq)
-+			enable_irq_wake(ac_irq->start);
-+		if (usb_irq)
-+			enable_irq_wake(usb_irq->start);
-+	}
-+
-+	return 0;
-+}
-+
-+static int pda_power_resume(struct platform_device *pdev)
-+{
-+	if (device_may_wakeup(&pdev->dev)) {
-+		if (usb_irq)
-+			disable_irq_wake(usb_irq->start);
-+		if (ac_irq)
-+			disable_irq_wake(ac_irq->start);
-+	}
-+
-+	return 0;
-+}
-+#else
-+#define pda_power_suspend	NULL
-+#define pda_power_resume	NULL
-+#endif
-+
-+
- static struct platform_driver pda_power_pdrv = {
- 	.driver = {
- 		.name = "pda-power",
- 	},
- 	.probe = pda_power_probe,
- 	.remove = pda_power_remove,
-+	.suspend = pda_power_suspend,
-+	.resume = pda_power_resume,
- };
- 
- static int __init pda_power_init(void)
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0029-Support-using-VOLTAGE_-properties-for-apm-calculati.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0029-Support-using-VOLTAGE_-properties-for-apm-calculati.patch
deleted file mode 100644
index 7347fd5a00..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0029-Support-using-VOLTAGE_-properties-for-apm-calculati.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-From 57d1450b4e5f27fa78c75895dc30213bde7191bc Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:08:18 +0300
-Subject: [PATCH 29/64] Support using VOLTAGE_* properties for apm calculations. It's pretty
- dummy, but useful for batteries for which we can only get voltages.
-
----
- drivers/power/apm_power.c |   63 ++++++++++++++++++++++++++++++++++++--------
- 1 files changed, 51 insertions(+), 12 deletions(-)
-
-diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c
-index bbf3ee1..526c96e 100644
---- a/drivers/power/apm_power.c
-+++ b/drivers/power/apm_power.c
-@@ -13,6 +13,12 @@
- #include <linux/power_supply.h>
- #include <linux/apm-emulation.h>
- 
-+typedef enum {
-+	SOURCE_ENERGY,
-+	SOURCE_CHARGE,
-+	SOURCE_VOLTAGE,
-+} apm_source;
-+
- #define PSY_PROP(psy, prop, val) psy->get_property(psy, \
- 			 POWER_SUPPLY_PROP_##prop, val)
- 
-@@ -87,7 +93,7 @@ static void find_main_battery(void)
- 	}
- }
- 
--static int calculate_time(int status, int using_charge)
-+static int calculate_time(int status, apm_source source)
- {
- 	union power_supply_propval full;
- 	union power_supply_propval empty;
-@@ -106,20 +112,34 @@ static int calculate_time(int status, int using_charge)
- 			return -1;
- 	}
- 
--	if (using_charge) {
-+	switch (source) {
-+	case SOURCE_CHARGE:
- 		full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
- 		full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
- 		empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
- 		empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
- 		cur_avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
- 		cur_now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
--	} else {
-+		break;
-+	case SOURCE_ENERGY:
- 		full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
- 		full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
- 		empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
- 		empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
- 		cur_avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
- 		cur_now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
-+		break;
-+	case SOURCE_VOLTAGE:
-+		full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
-+		full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
-+		empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
-+		empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
-+		cur_avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
-+		cur_now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
-+		break;
-+	default:
-+		printk(KERN_ERR "Unsupported source: %d\n", source);
-+		return -1;
- 	}
- 
- 	if (_MPSY_PROP(full_prop, &full)) {
-@@ -146,7 +166,7 @@ static int calculate_time(int status, int using_charge)
- 		return -((cur.intval - empty.intval) * 60L) / I.intval;
- }
- 
--static int calculate_capacity(int using_charge)
-+static int calculate_capacity(apm_source source)
- {
- 	enum power_supply_property full_prop, empty_prop;
- 	enum power_supply_property full_design_prop, empty_design_prop;
-@@ -154,20 +174,33 @@ static int calculate_capacity(int using_charge)
- 	union power_supply_propval empty, full, cur;
- 	int ret;
- 
--	if (using_charge) {
-+	switch (source) {
-+	case SOURCE_CHARGE:
- 		full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
- 		empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
- 		full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
- 		empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN;
- 		now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
- 		avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
--	} else {
-+		break;
-+	case SOURCE_ENERGY:
- 		full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
- 		empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
- 		full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
- 		empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
- 		now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
- 		avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
-+	case SOURCE_VOLTAGE:
-+		full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
-+		empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
-+		full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
-+		empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
-+		now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
-+		avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
-+		break;
-+	default:
-+		printk(KERN_ERR "Unsupported source: %d\n", source);
-+		return -1;
- 	}
- 
- 	if (_MPSY_PROP(full_prop, &full)) {
-@@ -234,10 +267,12 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info)
- 		info->battery_life = capacity.intval;
- 	} else {
- 		/* try calculate using energy */
--		info->battery_life = calculate_capacity(0);
-+		info->battery_life = calculate_capacity(SOURCE_ENERGY);
- 		/* if failed try calculate using charge instead */
- 		if (info->battery_life == -1)
--			info->battery_life = calculate_capacity(1);
-+			info->battery_life = calculate_capacity(SOURCE_CHARGE);
-+		if (info->battery_life == -1)
-+			info->battery_life = calculate_capacity(SOURCE_VOLTAGE);
- 	}
- 
- 	/* charging status */
-@@ -263,18 +298,22 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info)
- 				!MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full)) {
- 			info->time = time_to_full.intval / 60;
- 		} else {
--			info->time = calculate_time(status.intval, 0);
-+			info->time = calculate_time(status.intval, SOURCE_ENERGY);
- 			if (info->time == -1)
--				info->time = calculate_time(status.intval, 1);
-+				info->time = calculate_time(status.intval, SOURCE_CHARGE);
-+			if (info->time == -1)
-+				info->time = calculate_time(status.intval, SOURCE_VOLTAGE);
- 		}
- 	} else {
- 		if (!MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty) ||
- 			      !MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty)) {
- 			info->time = time_to_empty.intval / 60;
- 		} else {
--			info->time = calculate_time(status.intval, 0);
-+			info->time = calculate_time(status.intval, SOURCE_ENERGY);
-+			if (info->time == -1)
-+				info->time = calculate_time(status.intval, SOURCE_CHARGE);
- 			if (info->time == -1)
--				info->time = calculate_time(status.intval, 1);
-+				info->time = calculate_time(status.intval, SOURCE_VOLTAGE);
- 		}
- 	}
- 
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0030-Core-driver-for-WM97xx-touchscreens.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0030-Core-driver-for-WM97xx-touchscreens.patch
deleted file mode 100644
index 1c86a39c74..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0030-Core-driver-for-WM97xx-touchscreens.patch
+++ /dev/null
@@ -1,1083 +0,0 @@
-From d3e044e0e10e6c6b75716cb927e92b4ec284132f Mon Sep 17 00:00:00 2001
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Date: Sat, 26 Jan 2008 21:14:20 +0300
-Subject: [PATCH 30/64] Core driver for WM97xx touchscreens
-
-This patch series adds support for the touchscreen controllers provided
-by Wolfson Microelectronics WM97xx series chips in both polled and
-streaming modes.
-
-These drivers have been maintained out of tree since 2003.  During that
-time the driver the primary maintainer was Liam Girdwood and a number of
-people have made contributions including Stanley Cai, Rodolfo Giometti,
-Russell King, Marc Kleine-Budde, Ian Molton, Vincent Sanders, Andrew
-Zabolotny, Graeme Gregory, Mike Arthur and myself.  Apologies to anyone
-I have omitted.
-
-Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
-Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
-Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Cc: Stanley Cai <stanley.cai@intel.com>
-Cc: Rodolfo Giometti <giometti@enneenne.com>
-Cc: Russell King <rmk@arm.linux.org.uk>
-Cc: Marc Kleine-Budde <mkl@pengutronix.de>
-Cc: Ian Molton <spyro@f2s.com>
-Cc: Vincent Sanders <vince@kyllikki.org>
-Cc: Andrew Zabolotny <zap@homelink.ru>
----
- drivers/input/touchscreen/wm97xx-core.c |  724 +++++++++++++++++++++++++++++++
- include/linux/wm97xx.h                  |  309 +++++++++++++
- 2 files changed, 1033 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/touchscreen/wm97xx-core.c
- create mode 100644 include/linux/wm97xx.h
-
-diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
-new file mode 100644
-index 0000000..27a0a99
---- /dev/null
-+++ b/drivers/input/touchscreen/wm97xx-core.c
-@@ -0,0 +1,724 @@
-+/*
-+ * wm97xx-core.c  --  Touch screen driver core for Wolfson WM9705, WM9712
-+ *                    and WM9713 AC97 Codecs.
-+ *
-+ * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro@f2s.com>
-+ *                   Andrew Zabolotny <zap@homelink.ru>
-+ *                   Russell King <rmk@arm.linux.org.uk>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ * Notes:
-+ *
-+ *  Features:
-+ *       - supports WM9705, WM9712, WM9713
-+ *       - polling mode
-+ *       - continuous mode (arch-dependent)
-+ *       - adjustable rpu/dpp settings
-+ *       - adjustable pressure current
-+ *       - adjustable sample settle delay
-+ *       - 4 and 5 wire touchscreens (5 wire is WM9712 only)
-+ *       - pen down detection
-+ *       - battery monitor
-+ *       - sample AUX adcs
-+ *       - power management
-+ *       - codec GPIO
-+ *       - codec event notification
-+ * Todo
-+ *       - Support for async sampling control for noisy LCDs.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/string.h>
-+#include <linux/proc_fs.h>
-+#include <linux/pm.h>
-+#include <linux/interrupt.h>
-+#include <linux/bitops.h>
-+#include <linux/workqueue.h>
-+#include <linux/wm97xx.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+
-+#define TS_NAME			"wm97xx"
-+#define WM_CORE_VERSION		"0.65"
-+#define DEFAULT_PRESSURE	0xb0c0
-+
-+
-+/*
-+ * Touchscreen absolute values
-+ *
-+ * These parameters are used to help the input layer discard out of
-+ * range readings and reduce jitter etc.
-+ *
-+ *   o min, max:- indicate the min and max values your touch screen returns
-+ *   o fuzz:- use a higher number to reduce jitter
-+ *
-+ * The default values correspond to Mainstone II in QVGA mode
-+ *
-+ * Please read
-+ * Documentation/input/input-programming.txt for more details.
-+ */
-+
-+static int abs_x[3] = {350, 3900, 5};
-+module_param_array(abs_x, int, NULL, 0);
-+MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz");
-+
-+static int abs_y[3] = {320, 3750, 40};
-+module_param_array(abs_y, int, NULL, 0);
-+MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz");
-+
-+static int abs_p[3] = {0, 150, 4};
-+module_param_array(abs_p, int, NULL, 0);
-+MODULE_PARM_DESC(abs_p, "Touchscreen absolute Pressure min, max, fuzz");
-+
-+/*
-+ * wm97xx IO access, all IO locking done by AC97 layer
-+ */
-+int wm97xx_reg_read(struct wm97xx *wm, u16 reg)
-+{
-+	if (wm->ac97)
-+		return wm->ac97->bus->ops->read(wm->ac97, reg);
-+	else
-+		return -1;
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_reg_read);
-+
-+void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val)
-+{
-+	/* cache digitiser registers */
-+	if (reg >= AC97_WM9713_DIG1 && reg <= AC97_WM9713_DIG3)
-+		wm->dig[(reg - AC97_WM9713_DIG1) >> 1] = val;
-+
-+	/* cache gpio regs */
-+	if (reg >= AC97_GPIO_CFG && reg <= AC97_MISC_AFE)
-+		wm->gpio[(reg - AC97_GPIO_CFG) >> 1] = val;
-+
-+	/* wm9713 irq reg */
-+	if (reg == 0x5a)
-+		wm->misc = val;
-+
-+	if (wm->ac97)
-+		wm->ac97->bus->ops->write(wm->ac97, reg, val);
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_reg_write);
-+
-+/**
-+ *	wm97xx_read_aux_adc - Read the aux adc.
-+ *	@wm: wm97xx device.
-+ *  @adcsel: codec ADC to be read
-+ *
-+ *	Reads the selected AUX ADC.
-+ */
-+
-+int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
-+{
-+	int power_adc = 0, auxval;
-+	u16 power = 0;
-+
-+	/* get codec */
-+	mutex_lock(&wm->codec_mutex);
-+
-+	/* When the touchscreen is not in use, we may have to power up
-+	 * the AUX ADC before we can use sample the AUX inputs->
-+	 */
-+	if (wm->id == WM9713_ID2 &&
-+	    (power = wm97xx_reg_read(wm, AC97_EXTENDED_MID)) & 0x8000) {
-+		power_adc = 1;
-+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, power & 0x7fff);
-+	}
-+
-+	/* Prepare the codec for AUX reading */
-+	wm->codec->aux_prepare(wm);
-+
-+	/* Turn polling mode on to read AUX ADC */
-+	wm->pen_probably_down = 1;
-+	wm->codec->poll_sample(wm, adcsel, &auxval);
-+
-+	if (power_adc)
-+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000);
-+
-+	wm->codec->dig_restore(wm);
-+
-+	wm->pen_probably_down = 0;
-+
-+	mutex_unlock(&wm->codec_mutex);
-+	return auxval & 0xfff;
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc);
-+
-+/**
-+ *	wm97xx_get_gpio - Get the status of a codec GPIO.
-+ *	@wm: wm97xx device.
-+ *      @gpio: gpio
-+ *
-+ *	Get the status of a codec GPIO pin
-+ */
-+
-+enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio)
-+{
-+	u16 status;
-+	enum wm97xx_gpio_status ret;
-+
-+	mutex_lock(&wm->codec_mutex);
-+	status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-+
-+	if (status & gpio)
-+		ret = WM97XX_GPIO_HIGH;
-+	else
-+		ret = WM97XX_GPIO_LOW;
-+
-+	mutex_unlock(&wm->codec_mutex);
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_get_gpio);
-+
-+/**
-+ *	wm97xx_set_gpio - Set the status of a codec GPIO.
-+ *	@wm: wm97xx device.
-+ *  @gpio: gpio
-+ *
-+ *
-+ *	Set the status of a codec GPIO pin
-+ */
-+
-+void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
-+				enum wm97xx_gpio_status status)
-+{
-+	u16 reg;
-+
-+	mutex_lock(&wm->codec_mutex);
-+	reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-+
-+	if (status & WM97XX_GPIO_HIGH)
-+		reg |= gpio;
-+	else
-+		reg &= ~gpio;
-+
-+	if (wm->id == WM9712_ID2)
-+		wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1);
-+	else
-+		wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg);
-+	mutex_unlock(&wm->codec_mutex);
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_set_gpio);
-+
-+/*
-+ * Codec GPIO pin configuration, this sets pin direction, polarity,
-+ * stickyness and wake up.
-+ */
-+void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
-+		   enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky,
-+		   enum wm97xx_gpio_wake wake)
-+{
-+	u16 reg;
-+
-+	mutex_lock(&wm->codec_mutex);
-+	reg = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-+
-+	if (pol == WM97XX_GPIO_POL_HIGH)
-+		reg |= gpio;
-+	else
-+		reg &= ~gpio;
-+
-+	wm97xx_reg_write(wm, AC97_GPIO_POLARITY, reg);
-+	reg = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
-+
-+	if (sticky == WM97XX_GPIO_STICKY)
-+		reg |= gpio;
-+	else
-+		reg &= ~gpio;
-+
-+	wm97xx_reg_write(wm, AC97_GPIO_STICKY, reg);
-+	reg = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
-+
-+	if (wake == WM97XX_GPIO_WAKE)
-+		reg |= gpio;
-+	else
-+		reg &= ~gpio;
-+
-+	wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, reg);
-+	reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-+
-+	if (dir == WM97XX_GPIO_IN)
-+		reg |= gpio;
-+	else
-+		reg &= ~gpio;
-+
-+	wm97xx_reg_write(wm, AC97_GPIO_CFG, reg);
-+	mutex_unlock(&wm->codec_mutex);
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
-+
-+/*
-+ * Handle a pen down interrupt.
-+ */
-+static void wm97xx_pen_irq_worker(struct work_struct *work)
-+{
-+	struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work);
-+
-+	/* do we need to enable the touch panel reader */
-+	if (wm->id == WM9705_ID2) {
-+		if (wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD) &
-+					WM97XX_PEN_DOWN)
-+			wm->pen_is_down = 1;
-+		else
-+			wm->pen_is_down = 0;
-+	} else {
-+		u16 status, pol;
-+		mutex_lock(&wm->codec_mutex);
-+		status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-+		pol = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-+
-+		if (WM97XX_GPIO_13 & pol & status) {
-+			wm->pen_is_down = 1;
-+			wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol &
-+						~WM97XX_GPIO_13);
-+		} else {
-+			wm->pen_is_down = 0;
-+			wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol |
-+					 WM97XX_GPIO_13);
-+		}
-+
-+		if (wm->id == WM9712_ID2)
-+			wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status &
-+						~WM97XX_GPIO_13) << 1);
-+		else
-+			wm97xx_reg_write(wm, AC97_GPIO_STATUS, status &
-+						~WM97XX_GPIO_13);
-+		mutex_unlock(&wm->codec_mutex);
-+	}
-+
-+	queue_delayed_work(wm->ts_workq, &wm->ts_reader, 0);
-+
-+	if (!wm->pen_is_down && wm->mach_ops && wm->mach_ops->acc_enabled)
-+		wm->mach_ops->acc_pen_up(wm);
-+	wm->mach_ops->irq_enable(wm, 1);
-+}
-+
-+/*
-+ * Codec PENDOWN irq handler
-+ *
-+ * We have to disable the codec interrupt in the handler because it can
-+ * take upto 1ms to clear the interrupt source. The interrupt is then enabled
-+ * again in the slow handler when the source has been cleared.
-+ */
-+static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
-+{
-+	struct wm97xx *wm = dev_id;
-+	wm->mach_ops->irq_enable(wm, 0);
-+	queue_work(wm->ts_workq, &wm->pen_event_work);
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * initialise pen IRQ handler and workqueue
-+ */
-+static int wm97xx_init_pen_irq(struct wm97xx *wm)
-+{
-+	u16 reg;
-+
-+	/* If an interrupt is supplied an IRQ enable operation must also be
-+	 * provided. */
-+	BUG_ON(!wm->mach_ops->irq_enable);
-+
-+	INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker);
-+
-+	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
-+			"wm97xx-pen", wm)) {
-+		dev_err(wm->dev,
-+			"Failed to register pen down interrupt, polling");
-+		wm->pen_irq = 0;
-+		return -EINVAL;
-+	}
-+
-+	/* enable PEN down on wm9712/13 */
-+	if (wm->id != WM9705_ID2) {
-+		reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
-+		wm97xx_reg_write(wm, AC97_MISC_AFE, reg & 0xfffb);
-+		reg = wm97xx_reg_read(wm, 0x5a);
-+		wm97xx_reg_write(wm, 0x5a, reg & ~0x0001);
-+	}
-+
-+	return 0;
-+}
-+
-+static int wm97xx_read_samples(struct wm97xx *wm)
-+{
-+	struct wm97xx_data data;
-+	int rc;
-+
-+	mutex_lock(&wm->codec_mutex);
-+
-+	if (wm->mach_ops && wm->mach_ops->acc_enabled)
-+		rc = wm->mach_ops->acc_pen_down(wm);
-+	else
-+		rc = wm->codec->poll_touch(wm, &data);
-+
-+	if (rc & RC_PENUP) {
-+		if (wm->pen_is_down) {
-+			wm->pen_is_down = 0;
-+			dev_dbg(wm->dev, "pen up\n");
-+			input_report_abs(wm->input_dev, ABS_PRESSURE, 0);
-+			input_sync(wm->input_dev);
-+		} else if (!(rc & RC_AGAIN)) {
-+			/* We need high frequency updates only while
-+			* pen is down, the user never will be able to
-+			* touch screen faster than a few times per
-+			* second... On the other hand, when the user
-+			* is actively working with the touchscreen we
-+			* don't want to lose the quick response. So we
-+			* will slowly increase sleep time after the
-+			* pen is up and quicky restore it to ~one task
-+			* switch when pen is down again.
-+			*/
-+			if (wm->ts_reader_interval < HZ / 10)
-+				wm->ts_reader_interval++;
-+		}
-+
-+	} else if (rc & RC_VALID) {
-+		dev_dbg(wm->dev,
-+			"pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n",
-+			data.x >> 12, data.x & 0xfff, data.y >> 12,
-+			data.y & 0xfff, data.p >> 12, data.p & 0xfff);
-+		input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff);
-+		input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff);
-+		input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff);
-+		input_sync(wm->input_dev);
-+		wm->pen_is_down = 1;
-+		wm->ts_reader_interval = wm->ts_reader_min_interval;
-+	} else if (rc & RC_PENDOWN) {
-+		dev_dbg(wm->dev, "pen down");
-+		wm->pen_is_down = 1;
-+		wm->ts_reader_interval = wm->ts_reader_min_interval;
-+	}
-+
-+	mutex_unlock(&wm->codec_mutex);
-+	return rc;
-+}
-+
-+/*
-+* The touchscreen sample reader.
-+*/
-+static void wm97xx_ts_reader(struct work_struct *work)
-+{
-+	int rc;
-+	struct wm97xx *wm = container_of(work, struct wm97xx, ts_reader.work);
-+
-+	BUG_ON(!wm->codec);
-+
-+	do {
-+		rc = wm97xx_read_samples(wm);
-+	} while (rc & RC_AGAIN);
-+
-+	if (wm->pen_is_down || !wm->pen_irq)
-+		queue_delayed_work(wm->ts_workq, &wm->ts_reader,
-+				   wm->ts_reader_interval);
-+}
-+
-+/**
-+ *	wm97xx_ts_input_open - Open the touch screen input device.
-+ *	@idev:	Input device to be opened.
-+ *
-+ *	Called by the input sub system to open a wm97xx touchscreen device.
-+ *  Starts the touchscreen thread and touch digitiser.
-+ */
-+static int wm97xx_ts_input_open(struct input_dev *idev)
-+{
-+	struct wm97xx *wm = input_get_drvdata(idev);
-+
-+	wm->ts_workq = create_singlethread_workqueue("kwm97xx");
-+	if (wm->ts_workq == NULL) {
-+		dev_err(wm->dev,
-+			"Failed to create workqueue\n");
-+		return -EINVAL;
-+	}
-+
-+	/* start digitiser */
-+	if (wm->mach_ops && wm->mach_ops->acc_enabled)
-+		wm->codec->acc_enable(wm, 1);
-+	wm->codec->dig_enable(wm, 1);
-+
-+	INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader);
-+
-+	wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1;
-+	if (wm->ts_reader_min_interval < 1)
-+		wm->ts_reader_min_interval = 1;
-+	wm->ts_reader_interval = wm->ts_reader_min_interval;
-+
-+	wm->pen_is_down = 0;
-+	if (wm->pen_irq)
-+		wm97xx_init_pen_irq(wm);
-+	else
-+		dev_err(wm->dev, "No IRQ specified\n");
-+
-+	/* If we either don't have an interrupt for pen down events or
-+	 * failed to acquire it then we need to poll.
-+	 */
-+	if (wm->pen_irq == 0)
-+		queue_delayed_work(wm->ts_workq, &wm->ts_reader,
-+				   wm->ts_reader_interval);
-+
-+	return 0;
-+}
-+
-+/**
-+ *	wm97xx_ts_input_close - Close the touch screen input device.
-+ *	@idev:	Input device to be closed.
-+ *
-+ *	Called by the input sub system to close a wm97xx touchscreen device.
-+ *  Kills the touchscreen thread and stops the touch digitiser.
-+ */
-+
-+static void wm97xx_ts_input_close(struct input_dev *idev)
-+{
-+	struct wm97xx *wm = input_get_drvdata(idev);
-+
-+	if (wm->pen_irq)
-+		free_irq(wm->pen_irq, wm);
-+
-+	wm->pen_is_down = 0;
-+
-+	/* ts_reader rearms itself so we need to explicitly stop it
-+	 * before we destroy the workqueue.
-+	 */
-+	cancel_delayed_work_sync(&wm->ts_reader);
-+	destroy_workqueue(wm->ts_workq);
-+
-+	/* stop digitiser */
-+	wm->codec->dig_enable(wm, 0);
-+	if (wm->mach_ops && wm->mach_ops->acc_enabled)
-+		wm->codec->acc_enable(wm, 0);
-+}
-+
-+static int wm97xx_probe(struct device *dev)
-+{
-+	struct wm97xx *wm;
-+	int ret = 0, id = 0;
-+
-+	wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
-+	if (!wm)
-+		return -ENOMEM;
-+	mutex_init(&wm->codec_mutex);
-+
-+	wm->dev = dev;
-+	dev->driver_data = wm;
-+	wm->ac97 = to_ac97_t(dev);
-+
-+	/* check that we have a supported codec */
-+	id = wm97xx_reg_read(wm, AC97_VENDOR_ID1);
-+	if (id != WM97XX_ID1) {
-+		dev_err(dev, "Device with vendor %04x is not a wm97xx\n", id);
-+		kfree(wm);
-+		return -ENODEV;
-+	}
-+
-+	wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2);
-+
-+	dev_info(wm->dev, "detected a wm97%02x codec", wm->id & 0xff);
-+
-+	switch (wm->id & 0xff) {
-+#ifdef CONFIG_TOUCHSCREEN_WM9705
-+	case 0x05:
-+		wm->codec = &wm9705_codec;
-+		break;
-+#endif
-+#ifdef CONFIG_TOUCHSCREEN_WM9712
-+	case 0x12:
-+		wm->codec = &wm9712_codec;
-+		break;
-+#endif
-+#ifdef CONFIG_TOUCHSCREEN_WM9713
-+	case 0x13:
-+		wm->codec = &wm9713_codec;
-+		break;
-+#endif
-+	default:
-+		dev_err(wm->dev, "Support for wm97%02x not compiled in.\n",
-+			wm->id & 0xff);
-+		kfree(wm);
-+		return -ENODEV;
-+	}
-+
-+	wm->input_dev = input_allocate_device();
-+	if (wm->input_dev == NULL) {
-+		kfree(wm);
-+		return -ENOMEM;
-+	}
-+
-+	/* set up touch configuration */
-+	wm->input_dev->name = "wm97xx touchscreen";
-+	wm->input_dev->open = wm97xx_ts_input_open;
-+	wm->input_dev->close = wm97xx_ts_input_close;
-+	set_bit(EV_ABS, wm->input_dev->evbit);
-+	set_bit(ABS_X, wm->input_dev->absbit);
-+	set_bit(ABS_Y, wm->input_dev->absbit);
-+	set_bit(ABS_PRESSURE, wm->input_dev->absbit);
-+	input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
-+			     abs_x[2], 0);
-+	input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
-+			     abs_y[2], 0);
-+	input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
-+			     abs_p[2], 0);
-+	input_set_drvdata(wm->input_dev, wm);
-+	wm->input_dev->dev.parent = dev;
-+	ret = input_register_device(wm->input_dev);
-+	if (ret < 0) {
-+		input_free_device(wm->input_dev);
-+		kfree(wm);
-+		return -ENOMEM;
-+	}
-+
-+	/* set up physical characteristics */
-+	wm->codec->phy_init(wm);
-+
-+	/* load gpio cache */
-+	wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-+	wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-+	wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
-+	wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
-+	wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-+	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-+
-+	/* register our battery device */
-+	wm->battery_dev = platform_device_alloc("wm97xx-battery", 0);
-+	if (!wm->battery_dev)
-+		goto batt_err;
-+	platform_set_drvdata(wm->battery_dev, wm);
-+	wm->battery_dev->dev.parent = dev;
-+	ret = platform_device_register(wm->battery_dev);
-+	if (ret < 0)
-+		goto batt_reg_err;
-+
-+	/* register our extended touch device (for machine specific
-+	 * extensions) */
-+	wm->touch_dev = platform_device_alloc("wm97xx-touch", 0);
-+	if (!wm->touch_dev)
-+		goto touch_err;
-+	platform_set_drvdata(wm->touch_dev, wm);
-+	wm->touch_dev->dev.parent = dev;
-+	ret = platform_device_register(wm->touch_dev);
-+	if (ret < 0)
-+		goto touch_reg_err;
-+
-+	return ret;
-+
-+ touch_reg_err:
-+	platform_device_put(wm->touch_dev);
-+ touch_err:
-+	platform_device_unregister(wm->battery_dev);
-+ batt_reg_err:
-+	platform_device_put(wm->battery_dev);
-+ batt_err:
-+	input_unregister_device(wm->input_dev);
-+	kfree(wm);
-+	return ret;
-+}
-+
-+static int wm97xx_remove(struct device *dev)
-+{
-+	struct wm97xx *wm = dev_get_drvdata(dev);
-+
-+	platform_device_unregister(wm->battery_dev);
-+	platform_device_unregister(wm->touch_dev);
-+	input_unregister_device(wm->input_dev);
-+
-+	kfree(wm);
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int wm97xx_resume(struct device *dev)
-+{
-+	struct wm97xx *wm = dev_get_drvdata(dev);
-+
-+	/* restore digitiser and gpios */
-+	if (wm->id == WM9713_ID2) {
-+		wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig[0]);
-+		wm97xx_reg_write(wm, 0x5a, wm->misc);
-+		if (wm->input_dev->users) {
-+			u16 reg;
-+			reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) & 0x7fff;
-+			wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
-+		}
-+	}
-+
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig[1]);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2]);
-+
-+	wm97xx_reg_write(wm, AC97_GPIO_CFG, wm->gpio[0]);
-+	wm97xx_reg_write(wm, AC97_GPIO_POLARITY, wm->gpio[1]);
-+	wm97xx_reg_write(wm, AC97_GPIO_STICKY, wm->gpio[2]);
-+	wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, wm->gpio[3]);
-+	wm97xx_reg_write(wm, AC97_GPIO_STATUS, wm->gpio[4]);
-+	wm97xx_reg_write(wm, AC97_MISC_AFE, wm->gpio[5]);
-+
-+	return 0;
-+}
-+
-+#else
-+#define wm97xx_resume		NULL
-+#endif
-+
-+/*
-+ * Machine specific operations
-+ */
-+int wm97xx_register_mach_ops(struct wm97xx *wm,
-+			     struct wm97xx_mach_ops *mach_ops)
-+{
-+	mutex_lock(&wm->codec_mutex);
-+	if (wm->mach_ops) {
-+		mutex_unlock(&wm->codec_mutex);
-+		return -EINVAL;
-+	}
-+	wm->mach_ops = mach_ops;
-+	mutex_unlock(&wm->codec_mutex);
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_register_mach_ops);
-+
-+void wm97xx_unregister_mach_ops(struct wm97xx *wm)
-+{
-+	mutex_lock(&wm->codec_mutex);
-+	wm->mach_ops = NULL;
-+	mutex_unlock(&wm->codec_mutex);
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
-+
-+static struct device_driver wm97xx_driver = {
-+	.name = 	"ac97",
-+	.bus = 		&ac97_bus_type,
-+	.owner = 	THIS_MODULE,
-+	.probe = 	wm97xx_probe,
-+	.remove = 	wm97xx_remove,
-+	.resume =	wm97xx_resume,
-+};
-+
-+static int __init wm97xx_init(void)
-+{
-+	return driver_register(&wm97xx_driver);
-+}
-+
-+static void __exit wm97xx_exit(void)
-+{
-+	driver_unregister(&wm97xx_driver);
-+}
-+
-+module_init(wm97xx_init);
-+module_exit(wm97xx_exit);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
-+MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
-new file mode 100644
-index 0000000..fc6e0b3
---- /dev/null
-+++ b/include/linux/wm97xx.h
-@@ -0,0 +1,309 @@
-+
-+/*
-+ * Register bits and API for Wolfson WM97xx series of codecs
-+ */
-+
-+#ifndef _LINUX_WM97XX_H
-+#define _LINUX_WM97XX_H
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/initval.h>
-+#include <linux/types.h>
-+#include <linux/list.h>
-+#include <linux/input.h>	/* Input device layer */
-+#include <linux/platform_device.h>
-+
-+/*
-+ * WM97xx AC97 Touchscreen registers
-+ */
-+#define AC97_WM97XX_DIGITISER1		0x76
-+#define AC97_WM97XX_DIGITISER2		0x78
-+#define AC97_WM97XX_DIGITISER_RD 	0x7a
-+#define AC97_WM9713_DIG1		0x74
-+#define AC97_WM9713_DIG2		AC97_WM97XX_DIGITISER1
-+#define AC97_WM9713_DIG3		AC97_WM97XX_DIGITISER2
-+
-+/*
-+ * WM97xx register bits
-+ */
-+#define WM97XX_POLL		0x8000	/* initiate a polling measurement */
-+#define WM97XX_ADCSEL_X		0x1000	/* x coord measurement */
-+#define WM97XX_ADCSEL_Y		0x2000	/* y coord measurement */
-+#define WM97XX_ADCSEL_PRES	0x3000	/* pressure measurement */
-+#define WM97XX_ADCSEL_MASK	0x7000
-+#define WM97XX_COO		0x0800	/* enable coordinate mode */
-+#define WM97XX_CTC		0x0400	/* enable continuous mode */
-+#define WM97XX_CM_RATE_93	0x0000	/* 93.75Hz continuous rate */
-+#define WM97XX_CM_RATE_187	0x0100	/* 187.5Hz continuous rate */
-+#define WM97XX_CM_RATE_375	0x0200	/* 375Hz continuous rate */
-+#define WM97XX_CM_RATE_750	0x0300	/* 750Hz continuous rate */
-+#define WM97XX_CM_RATE_8K	0x00f0	/* 8kHz continuous rate */
-+#define WM97XX_CM_RATE_12K	0x01f0	/* 12kHz continuous rate */
-+#define WM97XX_CM_RATE_24K	0x02f0	/* 24kHz continuous rate */
-+#define WM97XX_CM_RATE_48K	0x03f0	/* 48kHz continuous rate */
-+#define WM97XX_CM_RATE_MASK	0x03f0
-+#define WM97XX_RATE(i)		(((i & 3) << 8) | ((i & 4) ? 0xf0 : 0))
-+#define WM97XX_DELAY(i)		((i << 4) & 0x00f0)	/* sample delay times */
-+#define WM97XX_DELAY_MASK	0x00f0
-+#define WM97XX_SLEN		0x0008	/* slot read back enable */
-+#define WM97XX_SLT(i)		((i - 5) & 0x7)	/* panel slot (5-11) */
-+#define WM97XX_SLT_MASK		0x0007
-+#define WM97XX_PRP_DETW		0x4000	/* detect on, digitise off, wake */
-+#define WM97XX_PRP_DET		0x8000	/* detect on, digitise off, no wake */
-+#define WM97XX_PRP_DET_DIG	0xc000	/* setect on, digitise on */
-+#define WM97XX_RPR		0x2000	/* wake up on pen down */
-+#define WM97XX_PEN_DOWN		0x8000	/* pen is down */
-+#define WM97XX_ADCSRC_MASK	0x7000	/* ADC source mask */
-+
-+#define WM97XX_AUX_ID1		0x8001
-+#define WM97XX_AUX_ID2		0x8002
-+#define WM97XX_AUX_ID3		0x8003
-+#define WM97XX_AUX_ID4		0x8004
-+
-+
-+/* WM9712 Bits */
-+#define WM9712_45W		0x1000	/* set for 5-wire touchscreen */
-+#define WM9712_PDEN		0x0800	/* measure only when pen down */
-+#define WM9712_WAIT		0x0200	/* wait until adc is read before next sample */
-+#define WM9712_PIL		0x0100	/* current used for pressure measurement. set 400uA else 200uA */
-+#define WM9712_MASK_HI		0x0040	/* hi on mask pin (47) stops conversions */
-+#define WM9712_MASK_EDGE	0x0080	/* rising/falling edge on pin delays sample */
-+#define	WM9712_MASK_SYNC	0x00c0	/* rising/falling edge on mask initiates sample */
-+#define WM9712_RPU(i)		(i&0x3f)	/* internal pull up on pen detect (64k / rpu) */
-+#define WM9712_PD(i)		(0x1 << i)	/* power management */
-+
-+/* WM9712 Registers */
-+#define AC97_WM9712_POWER	0x24
-+#define AC97_WM9712_REV		0x58
-+
-+/* WM9705 Bits */
-+#define WM9705_PDEN		0x1000	/* measure only when pen is down */
-+#define WM9705_PINV		0x0800	/* inverts sense of pen down output */
-+#define WM9705_BSEN		0x0400	/* BUSY flag enable, pin47 is 1 when busy */
-+#define WM9705_BINV		0x0200	/* invert BUSY (pin47) output */
-+#define WM9705_WAIT		0x0100	/* wait until adc is read before next sample */
-+#define WM9705_PIL		0x0080	/* current used for pressure measurement. set 400uA else 200uA */
-+#define WM9705_PHIZ		0x0040	/* set PHONE and PCBEEP inputs to high impedance */
-+#define WM9705_MASK_HI		0x0010	/* hi on mask stops conversions */
-+#define WM9705_MASK_EDGE	0x0020	/* rising/falling edge on pin delays sample */
-+#define	WM9705_MASK_SYNC	0x0030	/* rising/falling edge on mask initiates sample */
-+#define WM9705_PDD(i)		(i & 0x000f)	/* pen detect comparator threshold */
-+
-+
-+/* WM9713 Bits */
-+#define WM9713_PDPOL		0x0400	/* Pen down polarity */
-+#define WM9713_POLL		0x0200	/* initiate a polling measurement */
-+#define WM9713_CTC		0x0100	/* enable continuous mode */
-+#define WM9713_ADCSEL_X		0x0002	/* X measurement */
-+#define WM9713_ADCSEL_Y		0x0004	/* Y measurement */
-+#define WM9713_ADCSEL_PRES	0x0008	/* Pressure measurement */
-+#define WM9713_COO		0x0001	/* enable coordinate mode */
-+#define WM9713_PDEN		0x0800	/* measure only when pen down */
-+#define WM9713_ADCSEL_MASK	0x00fe	/* ADC selection mask */
-+#define WM9713_WAIT		0x0200	/* coordinate wait */
-+
-+/* AUX ADC ID's */
-+#define TS_COMP1		0x0
-+#define TS_COMP2		0x1
-+#define TS_BMON			0x2
-+#define TS_WIPER		0x3
-+
-+/* ID numbers */
-+#define WM97XX_ID1		0x574d
-+#define WM9712_ID2		0x4c12
-+#define WM9705_ID2		0x4c05
-+#define WM9713_ID2		0x4c13
-+
-+/* Codec GPIO's */
-+#define WM97XX_MAX_GPIO		16
-+#define WM97XX_GPIO_1		(1 << 1)
-+#define WM97XX_GPIO_2		(1 << 2)
-+#define WM97XX_GPIO_3		(1 << 3)
-+#define WM97XX_GPIO_4		(1 << 4)
-+#define WM97XX_GPIO_5		(1 << 5)
-+#define WM97XX_GPIO_6		(1 << 6)
-+#define WM97XX_GPIO_7		(1 << 7)
-+#define WM97XX_GPIO_8		(1 << 8)
-+#define WM97XX_GPIO_9		(1 << 9)
-+#define WM97XX_GPIO_10		(1 << 10)
-+#define WM97XX_GPIO_11		(1 << 11)
-+#define WM97XX_GPIO_12		(1 << 12)
-+#define WM97XX_GPIO_13		(1 << 13)
-+#define WM97XX_GPIO_14		(1 << 14)
-+#define WM97XX_GPIO_15		(1 << 15)
-+
-+
-+#define AC97_LINK_FRAME		21	/* time in uS for AC97 link frame */
-+
-+
-+/*---------------- Return codes from sample reading functions ---------------*/
-+
-+/* More data is available; call the sample gathering function again */
-+#define RC_AGAIN			0x00000001
-+/* The returned sample is valid */
-+#define RC_VALID			0x00000002
-+/* The pen is up (the first RC_VALID without RC_PENUP means pen is down) */
-+#define RC_PENUP			0x00000004
-+/* The pen is down (RC_VALID implies RC_PENDOWN, but sometimes it is helpful
-+   to tell the handler that the pen is down but we don't know yet his coords,
-+   so the handler should not sleep or wait for pendown irq) */
-+#define RC_PENDOWN			0x00000008
-+
-+/*
-+ * The wm97xx driver provides a private API for writing platform-specific
-+ * drivers.
-+ */
-+
-+/* The structure used to return arch specific sampled data into */
-+struct wm97xx_data {
-+    int x;
-+    int y;
-+    int p;
-+};
-+
-+/*
-+ * Codec GPIO status
-+ */
-+enum wm97xx_gpio_status {
-+    WM97XX_GPIO_HIGH,
-+    WM97XX_GPIO_LOW
-+};
-+
-+/*
-+ * Codec GPIO direction
-+ */
-+enum wm97xx_gpio_dir {
-+    WM97XX_GPIO_IN,
-+    WM97XX_GPIO_OUT
-+};
-+
-+/*
-+ * Codec GPIO polarity
-+ */
-+enum wm97xx_gpio_pol {
-+    WM97XX_GPIO_POL_HIGH,
-+    WM97XX_GPIO_POL_LOW
-+};
-+
-+/*
-+ * Codec GPIO sticky
-+ */
-+enum wm97xx_gpio_sticky {
-+    WM97XX_GPIO_STICKY,
-+    WM97XX_GPIO_NOTSTICKY
-+};
-+
-+/*
-+ * Codec GPIO wake
-+ */
-+enum wm97xx_gpio_wake {
-+    WM97XX_GPIO_WAKE,
-+    WM97XX_GPIO_NOWAKE
-+};
-+
-+/*
-+ * Digitiser ioctl commands
-+ */
-+#define WM97XX_DIG_START	0x1
-+#define WM97XX_DIG_STOP		0x2
-+#define WM97XX_PHY_INIT		0x3
-+#define WM97XX_AUX_PREPARE	0x4
-+#define WM97XX_DIG_RESTORE	0x5
-+
-+struct wm97xx;
-+
-+extern struct wm97xx_codec_drv wm9705_codec;
-+extern struct wm97xx_codec_drv wm9712_codec;
-+extern struct wm97xx_codec_drv wm9713_codec;
-+
-+/*
-+ * Codec driver interface - allows mapping to WM9705/12/13 and newer codecs
-+ */
-+struct wm97xx_codec_drv {
-+	u16 id;
-+	char *name;
-+
-+	/* read 1 sample */
-+	int (*poll_sample) (struct wm97xx *, int adcsel, int *sample);
-+
-+	/* read X,Y,[P] in poll */
-+	int (*poll_touch) (struct wm97xx *, struct wm97xx_data *);
-+
-+	int (*acc_enable) (struct wm97xx *, int enable);
-+	void (*phy_init) (struct wm97xx *);
-+	void (*dig_enable) (struct wm97xx *, int enable);
-+	void (*dig_restore) (struct wm97xx *);
-+	void (*aux_prepare) (struct wm97xx *);
-+};
-+
-+
-+/* Machine specific and accelerated touch operations */
-+struct wm97xx_mach_ops {
-+
-+	/* accelerated touch readback - coords are transmited on AC97 link */
-+	int acc_enabled;
-+	void (*acc_pen_up) (struct wm97xx *);
-+	int (*acc_pen_down) (struct wm97xx *);
-+	int (*acc_startup) (struct wm97xx *);
-+	void (*acc_shutdown) (struct wm97xx *);
-+
-+	/* interrupt mask control - required for accelerated operation */
-+	void (*irq_enable) (struct wm97xx *, int enable);
-+
-+	/* pre and post sample - can be used to minimise any analog noise */
-+	void (*pre_sample) (int);  /* function to run before sampling */
-+	void (*post_sample) (int);  /* function to run after sampling */
-+};
-+
-+struct wm97xx {
-+	u16 dig[3], id, gpio[6], misc;	/* Cached codec registers */
-+	u16 dig_save[3];		/* saved during aux reading */
-+	struct wm97xx_codec_drv *codec;	/* attached codec driver*/
-+	struct input_dev *input_dev;	/* touchscreen input device */
-+	struct snd_ac97 *ac97;		/* ALSA codec access */
-+	struct device *dev;		/* ALSA device */
-+	struct platform_device *battery_dev;
-+	struct platform_device *touch_dev;
-+	struct wm97xx_mach_ops *mach_ops;
-+	struct mutex codec_mutex;
-+	struct delayed_work ts_reader;  /* Used to poll touchscreen */
-+	unsigned long ts_reader_interval; /* Current interval for timer */
-+	unsigned long ts_reader_min_interval; /* Minimum interval */
-+	unsigned int pen_irq;		/* Pen IRQ number in use */
-+	struct workqueue_struct *ts_workq;
-+	struct work_struct pen_event_work;
-+	u16 acc_slot;			/* AC97 slot used for acc touch data */
-+	u16 acc_rate;			/* acc touch data rate */
-+	unsigned pen_is_down:1;		/* Pen is down */
-+	unsigned aux_waiting:1;		/* aux measurement waiting */
-+	unsigned pen_probably_down:1;	/* used in polling mode */
-+};
-+
-+/*
-+ * Codec GPIO access (not supported on WM9705)
-+ * This can be used to set/get codec GPIO and Virtual GPIO status.
-+ */
-+enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio);
-+void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
-+			  enum wm97xx_gpio_status status);
-+void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio,
-+				     enum wm97xx_gpio_dir dir,
-+				     enum wm97xx_gpio_pol pol,
-+				     enum wm97xx_gpio_sticky sticky,
-+				     enum wm97xx_gpio_wake wake);
-+
-+/* codec AC97 IO access */
-+int wm97xx_reg_read(struct wm97xx *wm, u16 reg);
-+void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val);
-+
-+/* aux adc readback */
-+int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel);
-+
-+/* machine ops */
-+int wm97xx_register_mach_ops(struct wm97xx *, struct wm97xx_mach_ops *);
-+void wm97xx_unregister_mach_ops(struct wm97xx *);
-+
-+#endif
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0031-Add-chip-driver-for-WM9705-touchscreen.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0031-Add-chip-driver-for-WM9705-touchscreen.patch
deleted file mode 100644
index 3890795f61..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0031-Add-chip-driver-for-WM9705-touchscreen.patch
+++ /dev/null
@@ -1,383 +0,0 @@
-From 7b366ca784d0540613a43908de803e4dedc100d3 Mon Sep 17 00:00:00 2001
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Date: Sat, 26 Jan 2008 21:14:20 +0300
-Subject: [PATCH 31/64] Add chip driver for WM9705 touchscreen
-
-Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
-Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
-Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Cc: Stanley Cai <stanley.cai@intel.com>
-Cc: Rodolfo Giometti <giometti@enneenne.com>
-Cc: Russell King <rmk@arm.linux.org.uk>
-Cc: Marc Kleine-Budde <mkl@pengutronix.de>
-Cc: Ian Molton <spyro@f2s.com>
-Cc: Vince Sanders <vince@kyllikki.org>
-Cc: Andrew Zabolotny <zap@homelink.ru>
----
- drivers/input/touchscreen/wm9705.c |  352 ++++++++++++++++++++++++++++++++++++
- 1 files changed, 352 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/touchscreen/wm9705.c
-
-diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
-new file mode 100644
-index 0000000..f185104
---- /dev/null
-+++ b/drivers/input/touchscreen/wm9705.c
-@@ -0,0 +1,352 @@
-+/*
-+ * wm9705.c  --  Codec driver for Wolfson WM9705 AC97 Codec.
-+ *
-+ * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro@f2s.com>
-+ *                   Andrew Zabolotny <zap@homelink.ru>
-+ *                   Russell King <rmk@arm.linux.org.uk>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/wm97xx.h>
-+
-+#define TS_NAME			"wm97xx"
-+#define WM9705_VERSION		"0.62"
-+#define DEFAULT_PRESSURE	0xb0c0
-+
-+/*
-+ * Module parameters
-+ */
-+
-+/*
-+ * Set current used for pressure measurement.
-+ *
-+ * Set pil = 2 to use 400uA
-+ *     pil = 1 to use 200uA and
-+ *     pil = 0 to disable pressure measurement.
-+ *
-+ * This is used to increase the range of values returned by the adc
-+ * when measureing touchpanel pressure.
-+ */
-+static int pil;
-+module_param(pil, int, 0);
-+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
-+
-+/*
-+ * Set threshold for pressure measurement.
-+ *
-+ * Pen down pressure below threshold is ignored.
-+ */
-+static int pressure = DEFAULT_PRESSURE & 0xfff;
-+module_param(pressure, int, 0);
-+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
-+
-+/*
-+ * Set adc sample delay.
-+ *
-+ * For accurate touchpanel measurements, some settling time may be
-+ * required between the switch matrix applying a voltage across the
-+ * touchpanel plate and the ADC sampling the signal.
-+ *
-+ * This delay can be set by setting delay = n, where n is the array
-+ * position of the delay in the array delay_table below.
-+ * Long delays > 1ms are supported for completeness, but are not
-+ * recommended.
-+ */
-+static int delay = 4;
-+module_param(delay, int, 0);
-+MODULE_PARM_DESC(delay, "Set adc sample delay.");
-+
-+/*
-+ * Pen detect comparator threshold.
-+ *
-+ * 0 to Vmid in 15 steps, 0 = use zero power comparator with Vmid threshold
-+ * i.e. 1 =  Vmid/15 threshold
-+ *      15 =  Vmid/1 threshold
-+ *
-+ * Adjust this value if you are having problems with pen detect not
-+ * detecting any down events.
-+ */
-+static int pdd = 8;
-+module_param(pdd, int, 0);
-+MODULE_PARM_DESC(pdd, "Set pen detect comparator threshold");
-+
-+/*
-+ * Set adc mask function.
-+ *
-+ * Sources of glitch noise, such as signals driving an LCD display, may feed
-+ * through to the touch screen plates and affect measurement accuracy. In
-+ * order to minimise this, a signal may be applied to the MASK pin to delay or
-+ * synchronise the sampling.
-+ *
-+ * 0 = No delay or sync
-+ * 1 = High on pin stops conversions
-+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
-+ * 3 = Edge triggered, edge on pin starts conversion after delay param
-+ */
-+static int mask;
-+module_param(mask, int, 0);
-+MODULE_PARM_DESC(mask, "Set adc mask function.");
-+
-+/*
-+ * ADC sample delay times in uS
-+ */
-+static const int delay_table[] = {
-+	21,    /* 1 AC97 Link frames */
-+	42,    /* 2                  */
-+	84,    /* 4                  */
-+	167,   /* 8                  */
-+	333,   /* 16                 */
-+	667,   /* 32                 */
-+	1000,  /* 48                 */
-+	1333,  /* 64                 */
-+	2000,  /* 96                 */
-+	2667,  /* 128                */
-+	3333,  /* 160                */
-+	4000,  /* 192                */
-+	4667,  /* 224                */
-+	5333,  /* 256                */
-+	6000,  /* 288                */
-+	0      /* No delay, switch matrix always on */
-+};
-+
-+/*
-+ * Delay after issuing a POLL command.
-+ *
-+ * The delay is 3 AC97 link frames + the touchpanel settling delay
-+ */
-+static inline void poll_delay(int d)
-+{
-+	udelay(3 * AC97_LINK_FRAME + delay_table[d]);
-+}
-+
-+/*
-+ * set up the physical settings of the WM9705
-+ */
-+static void wm9705_phy_init(struct wm97xx *wm)
-+{
-+	u16 dig1 = 0, dig2 = WM97XX_RPR;
-+
-+	/*
-+	* mute VIDEO and AUX as they share X and Y touchscreen
-+	* inputs on the WM9705
-+	*/
-+	wm97xx_reg_write(wm, AC97_AUX, 0x8000);
-+	wm97xx_reg_write(wm, AC97_VIDEO, 0x8000);
-+
-+	/* touchpanel pressure current*/
-+	if (pil == 2) {
-+		dig2 |= WM9705_PIL;
-+		dev_dbg(wm->dev,
-+			"setting pressure measurement current to 400uA.");
-+	} else if (pil)
-+		dev_dbg(wm->dev,
-+			"setting pressure measurement current to 200uA.");
-+	if (!pil)
-+		pressure = 0;
-+
-+	/* polling mode sample settling delay */
-+	if (delay != 4) {
-+		if (delay < 0 || delay > 15) {
-+			dev_dbg(wm->dev, "supplied delay out of range.");
-+			delay = 4;
-+		}
-+	}
-+	dig1 &= 0xff0f;
-+	dig1 |= WM97XX_DELAY(delay);
-+	dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.",
-+		delay_table[delay]);
-+
-+	/* WM9705 pdd */
-+	dig2 |= (pdd & 0x000f);
-+	dev_dbg(wm->dev, "setting pdd to Vmid/%d", 1 - (pdd & 0x000f));
-+
-+	/* mask */
-+	dig2 |= ((mask & 0x3) << 4);
-+
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
-+}
-+
-+static void wm9705_dig_enable(struct wm97xx *wm, int enable)
-+{
-+	if (enable) {
-+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
-+				 wm->dig[2] | WM97XX_PRP_DET_DIG);
-+		wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
-+	} else
-+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
-+				 wm->dig[2] & ~WM97XX_PRP_DET_DIG);
-+}
-+
-+static void wm9705_aux_prepare(struct wm97xx *wm)
-+{
-+	memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG);
-+}
-+
-+static void wm9705_dig_restore(struct wm97xx *wm)
-+{
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]);
-+}
-+
-+static inline int is_pden(struct wm97xx *wm)
-+{
-+	return wm->dig[2] & WM9705_PDEN;
-+}
-+
-+/*
-+ * Read a sample from the WM9705 adc in polling mode.
-+ */
-+static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
-+{
-+	int timeout = 5 * delay;
-+
-+	if (!wm->pen_probably_down) {
-+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+		if (!(data & WM97XX_PEN_DOWN))
-+			return RC_PENUP;
-+		wm->pen_probably_down = 1;
-+	}
-+
-+	/* set up digitiser */
-+	if (adcsel & 0x8000)
-+		adcsel = ((adcsel & 0x7fff) + 3) << 12;
-+
-+	if (wm->mach_ops && wm->mach_ops->pre_sample)
-+		wm->mach_ops->pre_sample(adcsel);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
-+			 adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
-+
-+	/* wait 3 AC97 time slots + delay for conversion */
-+	poll_delay(delay);
-+
-+	/* wait for POLL to go low */
-+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
-+	       && timeout) {
-+		udelay(AC97_LINK_FRAME);
-+		timeout--;
-+	}
-+
-+	if (timeout <= 0) {
-+		/* If PDEN is set, we can get a timeout when pen goes up */
-+		if (is_pden(wm))
-+			wm->pen_probably_down = 0;
-+		else
-+			dev_dbg(wm->dev, "adc sample timeout");
-+		return RC_PENUP;
-+	}
-+
-+	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	if (wm->mach_ops && wm->mach_ops->post_sample)
-+		wm->mach_ops->post_sample(adcsel);
-+
-+	/* check we have correct sample */
-+	if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
-+		dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
-+		*sample & WM97XX_ADCSEL_MASK);
-+		return RC_PENUP;
-+	}
-+
-+	if (!(*sample & WM97XX_PEN_DOWN)) {
-+		wm->pen_probably_down = 0;
-+		return RC_PENUP;
-+	}
-+
-+	return RC_VALID;
-+}
-+
-+/*
-+ * Sample the WM9705 touchscreen in polling mode
-+ */
-+static int wm9705_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
-+{
-+	int rc;
-+
-+	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X, &data->x);
-+	if (rc != RC_VALID)
-+		return rc;
-+	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y);
-+	if (rc != RC_VALID)
-+		return rc;
-+	if (pil) {
-+		rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p);
-+		if (rc != RC_VALID)
-+			return rc;
-+	} else
-+		data->p = DEFAULT_PRESSURE;
-+
-+	return RC_VALID;
-+}
-+
-+/*
-+ * Enable WM9705 continuous mode, i.e. touch data is streamed across
-+ * an AC97 slot
-+ */
-+static int wm9705_acc_enable(struct wm97xx *wm, int enable)
-+{
-+	u16 dig1, dig2;
-+	int ret = 0;
-+
-+	dig1 = wm->dig[1];
-+	dig2 = wm->dig[2];
-+
-+	if (enable) {
-+		/* continous mode */
-+		if (wm->mach_ops->acc_startup &&
-+		    (ret = wm->mach_ops->acc_startup(wm)) < 0)
-+			return ret;
-+		dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK |
-+			  WM97XX_DELAY_MASK | WM97XX_SLT_MASK);
-+		dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN |
-+			WM97XX_DELAY(delay) |
-+			WM97XX_SLT(wm->acc_slot) |
-+			WM97XX_RATE(wm->acc_rate);
-+		if (pil)
-+			dig1 |= WM97XX_ADCSEL_PRES;
-+		dig2 |= WM9705_PDEN;
-+	} else {
-+		dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN);
-+		dig2 &= ~WM9705_PDEN;
-+		if (wm->mach_ops->acc_shutdown)
-+			wm->mach_ops->acc_shutdown(wm);
-+	}
-+
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
-+	return ret;
-+}
-+
-+struct wm97xx_codec_drv wm9705_codec = {
-+	.id = 	WM9705_ID2,
-+	.name = "wm9705",
-+	.poll_sample = wm9705_poll_sample,
-+	.poll_touch = wm9705_poll_touch,
-+	.acc_enable = wm9705_acc_enable,
-+	.phy_init = wm9705_phy_init,
-+	.dig_enable = wm9705_dig_enable,
-+	.dig_restore = wm9705_dig_restore,
-+	.aux_prepare = wm9705_aux_prepare,
-+};
-+EXPORT_SYMBOL_GPL(wm9705_codec);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
-+MODULE_DESCRIPTION("WM9705 Touch Screen Driver");
-+MODULE_LICENSE("GPL");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0032-Add-chip-driver-for-WM9712-touchscreen.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0032-Add-chip-driver-for-WM9712-touchscreen.patch
deleted file mode 100644
index 6265910a1e..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0032-Add-chip-driver-for-WM9712-touchscreen.patch
+++ /dev/null
@@ -1,492 +0,0 @@
-From b2640063b8321bdfb324c00d5f0c3366ac31696b Mon Sep 17 00:00:00 2001
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Date: Sat, 26 Jan 2008 21:14:19 +0300
-Subject: [PATCH 32/64] Add chip driver for WM9712 touchscreen
-
-Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
-Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
-Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Cc: Stanley Cai <stanley.cai@intel.com>
-Cc: Rodolfo Giometti <giometti@enneenne.com>
-Cc: Russell King <rmk@arm.linux.org.uk>
-Cc: Marc Kleine-Budde <mkl@pengutronix.de>
-Cc: Ian Molton <spyro@f2s.com>
-Cc: Vince Sanders <vince@kyllikki.org>
-Cc: Andrew Zabolotny <zap@homelink.ru>
----
- drivers/input/touchscreen/wm9712.c |  461 ++++++++++++++++++++++++++++++++++++
- 1 files changed, 461 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/touchscreen/wm9712.c
-
-diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
-new file mode 100644
-index 0000000..eaab326
---- /dev/null
-+++ b/drivers/input/touchscreen/wm9712.c
-@@ -0,0 +1,461 @@
-+/*
-+ * wm9712.c  --  Codec driver for Wolfson WM9712 AC97 Codecs.
-+ *
-+ * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro@f2s.com>
-+ *                   Andrew Zabolotny <zap@homelink.ru>
-+ *                   Russell King <rmk@arm.linux.org.uk>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/wm97xx.h>
-+
-+#define TS_NAME			"wm97xx"
-+#define WM9712_VERSION		"0.61"
-+#define DEFAULT_PRESSURE	0xb0c0
-+
-+/*
-+ * Module parameters
-+ */
-+
-+/*
-+ * Set internal pull up for pen detect.
-+ *
-+ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive)
-+ * i.e. pull up resistance = 64k Ohms / rpu.
-+ *
-+ * Adjust this value if you are having problems with pen detect not
-+ * detecting any down event.
-+ */
-+static int rpu = 8;
-+module_param(rpu, int, 0);
-+MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
-+
-+/*
-+ * Set current used for pressure measurement.
-+ *
-+ * Set pil = 2 to use 400uA
-+ *     pil = 1 to use 200uA and
-+ *     pil = 0 to disable pressure measurement.
-+ *
-+ * This is used to increase the range of values returned by the adc
-+ * when measureing touchpanel pressure.
-+ */
-+static int pil;
-+module_param(pil, int, 0);
-+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
-+
-+/*
-+ * Set threshold for pressure measurement.
-+ *
-+ * Pen down pressure below threshold is ignored.
-+ */
-+static int pressure = DEFAULT_PRESSURE & 0xfff;
-+module_param(pressure, int, 0);
-+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
-+
-+/*
-+ * Set adc sample delay.
-+ *
-+ * For accurate touchpanel measurements, some settling time may be
-+ * required between the switch matrix applying a voltage across the
-+ * touchpanel plate and the ADC sampling the signal.
-+ *
-+ * This delay can be set by setting delay = n, where n is the array
-+ * position of the delay in the array delay_table below.
-+ * Long delays > 1ms are supported for completeness, but are not
-+ * recommended.
-+ */
-+static int delay = 3;
-+module_param(delay, int, 0);
-+MODULE_PARM_DESC(delay, "Set adc sample delay.");
-+
-+/*
-+ * Set five_wire = 1 to use a 5 wire touchscreen.
-+ *
-+ * NOTE: Five wire mode does not allow for readback of pressure.
-+ */
-+static int five_wire;
-+module_param(five_wire, int, 0);
-+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
-+
-+/*
-+ * Set adc mask function.
-+ *
-+ * Sources of glitch noise, such as signals driving an LCD display, may feed
-+ * through to the touch screen plates and affect measurement accuracy. In
-+ * order to minimise this, a signal may be applied to the MASK pin to delay or
-+ * synchronise the sampling.
-+ *
-+ * 0 = No delay or sync
-+ * 1 = High on pin stops conversions
-+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
-+ * 3 = Edge triggered, edge on pin starts conversion after delay param
-+ */
-+static int mask;
-+module_param(mask, int, 0);
-+MODULE_PARM_DESC(mask, "Set adc mask function.");
-+
-+/*
-+ * Coordinate Polling Enable.
-+ *
-+ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together
-+ * for every poll.
-+ */
-+static int coord;
-+module_param(coord, int, 0);
-+MODULE_PARM_DESC(coord, "Polling coordinate mode");
-+
-+/*
-+ * ADC sample delay times in uS
-+ */
-+static const int delay_table[] = {
-+	21,    /* 1 AC97 Link frames */
-+	42,    /* 2 */
-+	84,    /* 4 */
-+	167,   /* 8 */
-+	333,   /* 16 */
-+	667,   /* 32 */
-+	1000,  /* 48 */
-+	1333,  /* 64 */
-+	2000,  /* 96 */
-+	2667,  /* 128 */
-+	3333,  /* 160 */
-+	4000,  /* 192 */
-+	4667,  /* 224 */
-+	5333,  /* 256 */
-+	6000,  /* 288 */
-+	0      /* No delay, switch matrix always on */
-+};
-+
-+/*
-+ * Delay after issuing a POLL command.
-+ *
-+ * The delay is 3 AC97 link frames + the touchpanel settling delay
-+ */
-+static inline void poll_delay(int d)
-+{
-+	udelay(3 * AC97_LINK_FRAME + delay_table[d]);
-+}
-+
-+/*
-+ * set up the physical settings of the WM9712
-+ */
-+static void wm9712_phy_init(struct wm97xx *wm)
-+{
-+	u16 dig1 = 0;
-+	u16 dig2 = WM97XX_RPR | WM9712_RPU(1);
-+
-+	/* WM9712 rpu */
-+	if (rpu) {
-+		dig2 &= 0xffc0;
-+		dig2 |= WM9712_RPU(rpu);
-+		dev_dbg(wm->dev, "setting pen detect pull-up to %d Ohms",
-+			64000 / rpu);
-+	}
-+
-+	/* touchpanel pressure current*/
-+	if (pil == 2) {
-+		dig2 |= WM9712_PIL;
-+		dev_dbg(wm->dev,
-+			"setting pressure measurement current to 400uA.");
-+	} else if (pil)
-+		dev_dbg(wm->dev,
-+			"setting pressure measurement current to 200uA.");
-+	if (!pil)
-+		pressure = 0;
-+
-+	/* WM9712 five wire */
-+	if (five_wire) {
-+		dig2 |= WM9712_45W;
-+		dev_dbg(wm->dev, "setting 5-wire touchscreen mode.");
-+	}
-+
-+	/* polling mode sample settling delay */
-+	if (delay < 0 || delay > 15) {
-+		dev_dbg(wm->dev, "supplied delay out of range.");
-+		delay = 4;
-+	}
-+	dig1 &= 0xff0f;
-+	dig1 |= WM97XX_DELAY(delay);
-+	dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.",
-+		delay_table[delay]);
-+
-+	/* mask */
-+	dig2 |= ((mask & 0x3) << 6);
-+	if (mask) {
-+		u16 reg;
-+		/* Set GPIO4 as Mask Pin*/
-+		reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
-+		wm97xx_reg_write(wm, AC97_MISC_AFE, reg | WM97XX_GPIO_4);
-+		reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-+		wm97xx_reg_write(wm, AC97_GPIO_CFG, reg | WM97XX_GPIO_4);
-+	}
-+
-+	/* wait - coord mode */
-+	if (coord)
-+		dig2 |= WM9712_WAIT;
-+
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
-+}
-+
-+static void wm9712_dig_enable(struct wm97xx *wm, int enable)
-+{
-+	u16 dig2 = wm->dig[2];
-+
-+	if (enable) {
-+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
-+				 dig2 | WM97XX_PRP_DET_DIG);
-+		wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
-+	} else
-+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
-+				 dig2 & ~WM97XX_PRP_DET_DIG);
-+}
-+
-+static void wm9712_aux_prepare(struct wm97xx *wm)
-+{
-+	memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG);
-+}
-+
-+static void wm9712_dig_restore(struct wm97xx *wm)
-+{
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]);
-+}
-+
-+static inline int is_pden(struct wm97xx *wm)
-+{
-+	return wm->dig[2] & WM9712_PDEN;
-+}
-+
-+/*
-+ * Read a sample from the WM9712 adc in polling mode.
-+ */
-+static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
-+{
-+	int timeout = 5 * delay;
-+
-+	if (!wm->pen_probably_down) {
-+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+		if (!(data & WM97XX_PEN_DOWN))
-+			return RC_PENUP;
-+		wm->pen_probably_down = 1;
-+	}
-+
-+	/* set up digitiser */
-+	if (adcsel & 0x8000)
-+		adcsel = ((adcsel & 0x7fff) + 3) << 12;
-+
-+	if (wm->mach_ops && wm->mach_ops->pre_sample)
-+		wm->mach_ops->pre_sample(adcsel);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
-+			 adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
-+
-+	/* wait 3 AC97 time slots + delay for conversion */
-+	poll_delay(delay);
-+
-+	/* wait for POLL to go low */
-+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
-+	       && timeout) {
-+		udelay(AC97_LINK_FRAME);
-+		timeout--;
-+	}
-+
-+	if (timeout <= 0) {
-+		/* If PDEN is set, we can get a timeout when pen goes up */
-+		if (is_pden(wm))
-+			wm->pen_probably_down = 0;
-+		else
-+			dev_dbg(wm->dev, "adc sample timeout");
-+		return RC_PENUP;
-+	}
-+
-+	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	if (wm->mach_ops && wm->mach_ops->post_sample)
-+		wm->mach_ops->post_sample(adcsel);
-+
-+	/* check we have correct sample */
-+	if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
-+		dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
-+		*sample & WM97XX_ADCSEL_MASK);
-+		return RC_PENUP;
-+	}
-+
-+	if (!(*sample & WM97XX_PEN_DOWN)) {
-+		wm->pen_probably_down = 0;
-+		return RC_PENUP;
-+	}
-+
-+	return RC_VALID;
-+}
-+
-+/*
-+ * Read a coord from the WM9712 adc in polling mode.
-+ */
-+static int wm9712_poll_coord(struct wm97xx *wm, struct wm97xx_data *data)
-+{
-+	int timeout = 5 * delay;
-+
-+	if (!wm->pen_probably_down) {
-+		u16 data_rd = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+		if (!(data_rd & WM97XX_PEN_DOWN))
-+			return RC_PENUP;
-+		wm->pen_probably_down = 1;
-+	}
-+
-+	/* set up digitiser */
-+	if (wm->mach_ops && wm->mach_ops->pre_sample)
-+		wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
-+
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
-+		WM97XX_COO | WM97XX_POLL | WM97XX_DELAY(delay));
-+
-+	/* wait 3 AC97 time slots + delay for conversion and read x */
-+	poll_delay(delay);
-+	data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	/* wait for POLL to go low */
-+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
-+	       && timeout) {
-+		udelay(AC97_LINK_FRAME);
-+		timeout--;
-+	}
-+
-+	if (timeout <= 0) {
-+		/* If PDEN is set, we can get a timeout when pen goes up */
-+		if (is_pden(wm))
-+			wm->pen_probably_down = 0;
-+		else
-+			dev_dbg(wm->dev, "adc sample timeout");
-+		return RC_PENUP;
-+	}
-+
-+	/* read back y data */
-+	data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	if (pil)
-+		data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	else
-+		data->p = DEFAULT_PRESSURE;
-+
-+	if (wm->mach_ops && wm->mach_ops->post_sample)
-+		wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
-+
-+	/* check we have correct sample */
-+	if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y))
-+		goto err;
-+	if (pil && !(data->p & WM97XX_ADCSEL_PRES))
-+		goto err;
-+
-+	if (!(data->x & WM97XX_PEN_DOWN)) {
-+		wm->pen_probably_down = 0;
-+		return RC_PENUP;
-+	}
-+	return RC_VALID;
-+err:
-+	return RC_PENUP;
-+}
-+
-+/*
-+ * Sample the WM9712 touchscreen in polling mode
-+ */
-+static int wm9712_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
-+{
-+	int rc;
-+
-+	if (coord) {
-+		rc = wm9712_poll_coord(wm, data);
-+		if (rc != RC_VALID)
-+			return rc;
-+	} else {
-+		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X, &data->x);
-+		if (rc != RC_VALID)
-+			return rc;
-+
-+		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y);
-+		if (rc != RC_VALID)
-+			return rc;
-+
-+		if (pil && !five_wire) {
-+			rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES,
-+						&data->p);
-+			if (rc != RC_VALID)
-+				return rc;
-+		} else
-+			data->p = DEFAULT_PRESSURE;
-+	}
-+	return RC_VALID;
-+}
-+
-+/*
-+ * Enable WM9712 continuous mode, i.e. touch data is streamed across
-+ * an AC97 slot
-+ */
-+static int wm9712_acc_enable(struct wm97xx *wm, int enable)
-+{
-+	u16 dig1, dig2;
-+	int ret = 0;
-+
-+	dig1 = wm->dig[1];
-+	dig2 = wm->dig[2];
-+
-+	if (enable) {
-+		/* continous mode */
-+		if (wm->mach_ops->acc_startup) {
-+			ret = wm->mach_ops->acc_startup(wm);
-+			if (ret < 0)
-+				return ret;
-+		}
-+		dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK |
-+			WM97XX_DELAY_MASK | WM97XX_SLT_MASK);
-+		dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN |
-+			WM97XX_DELAY(delay) |
-+			WM97XX_SLT(wm->acc_slot) |
-+			WM97XX_RATE(wm->acc_rate);
-+		if (pil)
-+			dig1 |= WM97XX_ADCSEL_PRES;
-+		dig2 |= WM9712_PDEN;
-+	} else {
-+		dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN);
-+		dig2 &= ~WM9712_PDEN;
-+		if (wm->mach_ops->acc_shutdown)
-+			wm->mach_ops->acc_shutdown(wm);
-+	}
-+
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
-+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
-+	return 0;
-+}
-+
-+struct wm97xx_codec_drv wm9712_codec = {
-+	.id = 	WM9712_ID2,
-+	.name = "wm9712",
-+	.poll_sample = wm9712_poll_sample,
-+	.poll_touch = wm9712_poll_touch,
-+	.acc_enable = wm9712_acc_enable,
-+	.phy_init = wm9712_phy_init,
-+	.dig_enable = wm9712_dig_enable,
-+	.dig_restore = wm9712_dig_restore,
-+	.aux_prepare = wm9712_aux_prepare,
-+};
-+EXPORT_SYMBOL_GPL(wm9712_codec);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
-+MODULE_DESCRIPTION("WM9712 Touch Screen Driver");
-+MODULE_LICENSE("GPL");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0033-Add-chip-driver-for-WM9713-touchscreen.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0033-Add-chip-driver-for-WM9713-touchscreen.patch
deleted file mode 100644
index a9dfa18557..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0033-Add-chip-driver-for-WM9713-touchscreen.patch
+++ /dev/null
@@ -1,490 +0,0 @@
-From 05b2a361eedb5461e902c73ebc6e30f9916b3a8a Mon Sep 17 00:00:00 2001
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Date: Sat, 26 Jan 2008 21:14:19 +0300
-Subject: [PATCH 33/64] Add chip driver for WM9713 touchscreen
-
-Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
-Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
-Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Cc: Stanley Cai <stanley.cai@intel.com>
-Cc: Rodolfo Giometti <giometti@enneenne.com>
-Cc: Russell King <rmk@arm.linux.org.uk>
-Cc: Marc Kleine-Budde <mkl@pengutronix.de>
-Cc: Ian Molton <spyro@f2s.com>
-Cc: Vince Sanders <vince@kyllikki.org>
-Cc: Andrew Zabolotny <zap@homelink.ru>
----
- drivers/input/touchscreen/wm9713.c |  459 ++++++++++++++++++++++++++++++++++++
- 1 files changed, 459 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/touchscreen/wm9713.c
-
-diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
-new file mode 100644
-index 0000000..5067e59
---- /dev/null
-+++ b/drivers/input/touchscreen/wm9713.c
-@@ -0,0 +1,459 @@
-+/*
-+ * wm9713.c  --  Codec touch driver for Wolfson WM9713 AC97 Codec.
-+ *
-+ * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro@f2s.com>
-+ *                   Andrew Zabolotny <zap@homelink.ru>
-+ *                   Russell King <rmk@arm.linux.org.uk>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/wm97xx.h>
-+
-+#define TS_NAME			"wm97xx"
-+#define WM9713_VERSION		"0.53"
-+#define DEFAULT_PRESSURE	0xb0c0
-+
-+/*
-+ * Module parameters
-+ */
-+
-+/*
-+ * Set internal pull up for pen detect.
-+ *
-+ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive)
-+ * i.e. pull up resistance = 64k Ohms / rpu.
-+ *
-+ * Adjust this value if you are having problems with pen detect not
-+ * detecting any down event.
-+ */
-+static int rpu = 8;
-+module_param(rpu, int, 0);
-+MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
-+
-+/*
-+ * Set current used for pressure measurement.
-+ *
-+ * Set pil = 2 to use 400uA
-+ *     pil = 1 to use 200uA and
-+ *     pil = 0 to disable pressure measurement.
-+ *
-+ * This is used to increase the range of values returned by the adc
-+ * when measureing touchpanel pressure.
-+ */
-+static int pil;
-+module_param(pil, int, 0);
-+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
-+
-+/*
-+ * Set threshold for pressure measurement.
-+ *
-+ * Pen down pressure below threshold is ignored.
-+ */
-+static int pressure = DEFAULT_PRESSURE & 0xfff;
-+module_param(pressure, int, 0);
-+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
-+
-+/*
-+ * Set adc sample delay.
-+ *
-+ * For accurate touchpanel measurements, some settling time may be
-+ * required between the switch matrix applying a voltage across the
-+ * touchpanel plate and the ADC sampling the signal.
-+ *
-+ * This delay can be set by setting delay = n, where n is the array
-+ * position of the delay in the array delay_table below.
-+ * Long delays > 1ms are supported for completeness, but are not
-+ * recommended.
-+ */
-+static int delay = 4;
-+module_param(delay, int, 0);
-+MODULE_PARM_DESC(delay, "Set adc sample delay.");
-+
-+/*
-+ * Set adc mask function.
-+ *
-+ * Sources of glitch noise, such as signals driving an LCD display, may feed
-+ * through to the touch screen plates and affect measurement accuracy. In
-+ * order to minimise this, a signal may be applied to the MASK pin to delay or
-+ * synchronise the sampling.
-+ *
-+ * 0 = No delay or sync
-+ * 1 = High on pin stops conversions
-+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
-+ * 3 = Edge triggered, edge on pin starts conversion after delay param
-+ */
-+static int mask;
-+module_param(mask, int, 0);
-+MODULE_PARM_DESC(mask, "Set adc mask function.");
-+
-+/*
-+ * Coordinate Polling Enable.
-+ *
-+ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together
-+ * for every poll.
-+ */
-+static int coord;
-+module_param(coord, int, 0);
-+MODULE_PARM_DESC(coord, "Polling coordinate mode");
-+
-+/*
-+ * ADC sample delay times in uS
-+ */
-+static const int delay_table[] = {
-+	21,    /* 1 AC97 Link frames */
-+	42,    /* 2 */
-+	84,    /* 4 */
-+	167,   /* 8 */
-+	333,   /* 16 */
-+	667,   /* 32 */
-+	1000,  /* 48 */
-+	1333,  /* 64 */
-+	2000,  /* 96 */
-+	2667,  /* 128 */
-+	3333,  /* 160 */
-+	4000,  /* 192 */
-+	4667,  /* 224 */
-+	5333,  /* 256 */
-+	6000,  /* 288 */
-+	0      /* No delay, switch matrix always on */
-+};
-+
-+/*
-+ * Delay after issuing a POLL command.
-+ *
-+ * The delay is 3 AC97 link frames + the touchpanel settling delay
-+ */
-+static inline void poll_delay(int d)
-+{
-+	udelay(3 * AC97_LINK_FRAME + delay_table[d]);
-+}
-+
-+/*
-+ * set up the physical settings of the WM9713
-+ */
-+static void wm9713_phy_init(struct wm97xx *wm)
-+{
-+	u16 dig1 = 0, dig2, dig3;
-+
-+	/* default values */
-+	dig2 = WM97XX_DELAY(4) | WM97XX_SLT(5);
-+	dig3 = WM9712_RPU(1);
-+
-+	/* rpu */
-+	if (rpu) {
-+		dig3 &= 0xffc0;
-+		dig3 |= WM9712_RPU(rpu);
-+		dev_info(wm->dev, "setting pen detect pull-up to %d Ohms\n",
-+			 64000 / rpu);
-+	}
-+
-+	/* touchpanel pressure */
-+	if (pil == 2) {
-+		dig3 |= WM9712_PIL;
-+		dev_info(wm->dev,
-+			 "setting pressure measurement current to 400uA.");
-+	} else if (pil)
-+		dev_info(wm->dev,
-+			 "setting pressure measurement current to 200uA.");
-+	if (!pil)
-+		pressure = 0;
-+
-+	/* sample settling delay */
-+	if (delay < 0 || delay > 15) {
-+		dev_info(wm->dev, "supplied delay out of range.");
-+		delay = 4;
-+		dev_info(wm->dev, "setting adc sample delay to %d u Secs.",
-+			 delay_table[delay]);
-+	}
-+	dig2 &= 0xff0f;
-+	dig2 |= WM97XX_DELAY(delay);
-+
-+	/* mask */
-+	dig3 |= ((mask & 0x3) << 4);
-+	if (coord)
-+		dig3 |= WM9713_WAIT;
-+
-+	wm->misc = wm97xx_reg_read(wm, 0x5a);
-+
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3);
-+	wm97xx_reg_write(wm, AC97_GPIO_STICKY, 0x0);
-+}
-+
-+static void wm9713_dig_enable(struct wm97xx *wm, int enable)
-+{
-+	u16 val;
-+
-+	if (enable) {
-+		val = wm97xx_reg_read(wm, AC97_EXTENDED_MID);
-+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, val & 0x7fff);
-+		wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] |
-+				 WM97XX_PRP_DET_DIG);
-+		wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
-+	} else {
-+		wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] &
-+					~WM97XX_PRP_DET_DIG);
-+		val = wm97xx_reg_read(wm, AC97_EXTENDED_MID);
-+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, val | 0x8000);
-+	}
-+}
-+
-+static void wm9713_dig_restore(struct wm97xx *wm)
-+{
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig_save[0]);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig_save[1]);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig_save[2]);
-+}
-+
-+static void wm9713_aux_prepare(struct wm97xx *wm)
-+{
-+	memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, 0);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, 0);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, WM97XX_PRP_DET_DIG);
-+}
-+
-+static inline int is_pden(struct wm97xx *wm)
-+{
-+	return wm->dig[2] & WM9713_PDEN;
-+}
-+
-+/*
-+ * Read a sample from the WM9713 adc in polling mode.
-+ */
-+static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
-+{
-+	u16 dig1;
-+	int timeout = 5 * delay;
-+
-+	if (!wm->pen_probably_down) {
-+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+		if (!(data & WM97XX_PEN_DOWN))
-+			return RC_PENUP;
-+		wm->pen_probably_down = 1;
-+	}
-+
-+	/* set up digitiser */
-+	if (adcsel & 0x8000)
-+		adcsel = 1 << ((adcsel & 0x7fff) + 3);
-+
-+	dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
-+	dig1 &= ~WM9713_ADCSEL_MASK;
-+
-+	if (wm->mach_ops && wm->mach_ops->pre_sample)
-+		wm->mach_ops->pre_sample(adcsel);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | adcsel | WM9713_POLL);
-+
-+	/* wait 3 AC97 time slots + delay for conversion */
-+	poll_delay(delay);
-+
-+	/* wait for POLL to go low */
-+	while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) &&
-+		timeout) {
-+		udelay(AC97_LINK_FRAME);
-+		timeout--;
-+	}
-+
-+	if (timeout <= 0) {
-+		/* If PDEN is set, we can get a timeout when pen goes up */
-+		if (is_pden(wm))
-+			wm->pen_probably_down = 0;
-+		else
-+			dev_dbg(wm->dev, "adc sample timeout");
-+		return RC_PENUP;
-+	}
-+
-+	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	if (wm->mach_ops && wm->mach_ops->post_sample)
-+		wm->mach_ops->post_sample(adcsel);
-+
-+	/* check we have correct sample */
-+	if ((*sample & WM97XX_ADCSRC_MASK) != ffs(adcsel >> 1) << 12) {
-+		dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
-+			*sample & WM97XX_ADCSRC_MASK);
-+		return RC_PENUP;
-+	}
-+
-+	if (!(*sample & WM97XX_PEN_DOWN)) {
-+		wm->pen_probably_down = 0;
-+		return RC_PENUP;
-+	}
-+
-+	return RC_VALID;
-+}
-+
-+/*
-+ * Read a coordinate from the WM9713 adc in polling mode.
-+ */
-+static int wm9713_poll_coord(struct wm97xx *wm, struct wm97xx_data *data)
-+{
-+	u16 dig1;
-+	int timeout = 5 * delay;
-+
-+	if (!wm->pen_probably_down) {
-+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+		if (!(data & WM97XX_PEN_DOWN))
-+			return RC_PENUP;
-+		wm->pen_probably_down = 1;
-+	}
-+
-+	/* set up digitiser */
-+	dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
-+	dig1 &= ~WM9713_ADCSEL_MASK;
-+	if (pil)
-+		dig1 |= WM97XX_ADCSEL_PRES;
-+
-+	if (wm->mach_ops && wm->mach_ops->pre_sample)
-+		wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG1,
-+			 dig1 | WM9713_POLL | WM9713_COO);
-+
-+	/* wait 3 AC97 time slots + delay for conversion */
-+	poll_delay(delay);
-+	data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	/* wait for POLL to go low */
-+	while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL)
-+	       && timeout) {
-+		udelay(AC97_LINK_FRAME);
-+		timeout--;
-+	}
-+
-+	if (timeout <= 0) {
-+		/* If PDEN is set, we can get a timeout when pen goes up */
-+		if (is_pden(wm))
-+			wm->pen_probably_down = 0;
-+		else
-+			dev_dbg(wm->dev, "adc sample timeout");
-+		return RC_PENUP;
-+	}
-+
-+	/* read back data */
-+	data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	if (pil)
-+		data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+	else
-+		data->p = DEFAULT_PRESSURE;
-+
-+	if (wm->mach_ops && wm->mach_ops->post_sample)
-+		wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
-+
-+	/* check we have correct sample */
-+	if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y))
-+		goto err;
-+	if (pil && !(data->p & WM97XX_ADCSEL_PRES))
-+		goto err;
-+
-+	if (!(data->x & WM97XX_PEN_DOWN)) {
-+		wm->pen_probably_down = 0;
-+		return RC_PENUP;
-+	}
-+	return RC_VALID;
-+err:
-+	return RC_PENUP;
-+}
-+
-+/*
-+ * Sample the WM9713 touchscreen in polling mode
-+ */
-+static int wm9713_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
-+{
-+	int rc;
-+
-+	if (coord) {
-+		rc = wm9713_poll_coord(wm, data);
-+		if (rc != RC_VALID)
-+			return rc;
-+	} else {
-+		rc = wm9713_poll_sample(wm, WM9713_ADCSEL_X, &data->x);
-+		if (rc != RC_VALID)
-+			return rc;
-+		rc = wm9713_poll_sample(wm, WM9713_ADCSEL_Y, &data->y);
-+		if (rc != RC_VALID)
-+			return rc;
-+		if (pil) {
-+			rc = wm9713_poll_sample(wm, WM9713_ADCSEL_PRES,
-+						&data->p);
-+			if (rc != RC_VALID)
-+				return rc;
-+		} else
-+			data->p = DEFAULT_PRESSURE;
-+	}
-+	return RC_VALID;
-+}
-+
-+/*
-+ * Enable WM9713 continuous mode, i.e. touch data is streamed across
-+ * an AC97 slot
-+ */
-+static int wm9713_acc_enable(struct wm97xx *wm, int enable)
-+{
-+	u16 dig1, dig2, dig3;
-+	int ret = 0;
-+
-+	dig1 = wm->dig[0];
-+	dig2 = wm->dig[1];
-+	dig3 = wm->dig[2];
-+
-+	if (enable) {
-+		/* continous mode */
-+		if (wm->mach_ops->acc_startup &&
-+			(ret = wm->mach_ops->acc_startup(wm)) < 0)
-+			return ret;
-+
-+		dig1 &= ~WM9713_ADCSEL_MASK;
-+		dig1 |= WM9713_CTC | WM9713_COO | WM9713_ADCSEL_X |
-+			WM9713_ADCSEL_Y;
-+		if (pil)
-+			dig1 |= WM9713_ADCSEL_PRES;
-+		dig2 &= ~(WM97XX_DELAY_MASK | WM97XX_SLT_MASK  |
-+			WM97XX_CM_RATE_MASK);
-+		dig2 |= WM97XX_SLEN | WM97XX_DELAY(delay) |
-+		WM97XX_SLT(wm->acc_slot) | WM97XX_RATE(wm->acc_rate);
-+		dig3 |= WM9713_PDEN;
-+	} else {
-+		dig1 &= ~(WM9713_CTC | WM9713_COO);
-+		dig2 &= ~WM97XX_SLEN;
-+		dig3 &= ~WM9713_PDEN;
-+		if (wm->mach_ops->acc_shutdown)
-+			wm->mach_ops->acc_shutdown(wm);
-+	}
-+
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2);
-+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3);
-+	return ret;
-+}
-+
-+struct wm97xx_codec_drv wm9713_codec = {
-+	.id = 	WM9713_ID2,
-+	.name = "wm9713",
-+	.poll_sample = wm9713_poll_sample,
-+	.poll_touch = wm9713_poll_touch,
-+	.acc_enable = wm9713_acc_enable,
-+	.phy_init = wm9713_phy_init,
-+	.dig_enable = wm9713_dig_enable,
-+	.dig_restore = wm9713_dig_restore,
-+	.aux_prepare = wm9713_aux_prepare,
-+};
-+EXPORT_SYMBOL_GPL(wm9713_codec);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
-+MODULE_DESCRIPTION("WM9713 Touch Screen Driver");
-+MODULE_LICENSE("GPL");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0034-Driver-for-WM97xx-touchscreens-in-streaming-mode-on.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0034-Driver-for-WM97xx-touchscreens-in-streaming-mode-on.patch
deleted file mode 100644
index 0391cfcd83..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0034-Driver-for-WM97xx-touchscreens-in-streaming-mode-on.patch
+++ /dev/null
@@ -1,329 +0,0 @@
-From 821604bad5ce1ef942eeb420afd9ea2c5c92875e Mon Sep 17 00:00:00 2001
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Date: Sat, 26 Jan 2008 21:14:19 +0300
-Subject: [PATCH 34/64] Driver for WM97xx touchscreens in streaming mode on Mainstone
-
-Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
-Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
-Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Cc: Stanley Cai <stanley.cai@intel.com>
-Cc: Rodolfo Giometti <giometti@enneenne.com>
-Cc: Russell King <rmk@arm.linux.org.uk>
-Cc: Marc Kleine-Budde <mkl@pengutronix.de>
-Cc: Ian Molton <spyro@f2s.com>
-Cc: Vince Sanders <vince@kyllikki.org>
-Cc: Andrew Zabolotny <zap@homelink.ru>
----
- drivers/input/touchscreen/mainstone-wm97xx.c |  298 ++++++++++++++++++++++++++
- 1 files changed, 298 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/touchscreen/mainstone-wm97xx.c
-
-diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
-new file mode 100644
-index 0000000..8e1c35d
---- /dev/null
-+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
-@@ -0,0 +1,298 @@
-+/*
-+ * mainstone-wm97xx.c  --  Mainstone Continuous Touch screen driver for
-+ *                         Wolfson WM97xx AC97 Codecs.
-+ *
-+ * Copyright 2004, 2007 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro@f2s.com>
-+ *                   Andrew Zabolotny <zap@homelink.ru>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ * Notes:
-+ *     This is a wm97xx extended touch driver to capture touch
-+ *     data in a continuous manner on the Intel XScale archictecture
-+ *
-+ *  Features:
-+ *       - codecs supported:- WM9705, WM9712, WM9713
-+ *       - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/wm97xx.h>
-+#include <linux/io.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#define VERSION		"0.13"
-+
-+struct continuous {
-+	u16 id;    /* codec id */
-+	u8 code;   /* continuous code */
-+	u8 reads;  /* number of coord reads per read cycle */
-+	u32 speed; /* number of coords per second */
-+};
-+
-+#define WM_READS(sp) ((sp / HZ) + 1)
-+
-+static const struct continuous cinfo[] = {
-+	{WM9705_ID2, 0, WM_READS(94), 94},
-+	{WM9705_ID2, 1, WM_READS(188), 188},
-+	{WM9705_ID2, 2, WM_READS(375), 375},
-+	{WM9705_ID2, 3, WM_READS(750), 750},
-+	{WM9712_ID2, 0, WM_READS(94), 94},
-+	{WM9712_ID2, 1, WM_READS(188), 188},
-+	{WM9712_ID2, 2, WM_READS(375), 375},
-+	{WM9712_ID2, 3, WM_READS(750), 750},
-+	{WM9713_ID2, 0, WM_READS(94), 94},
-+	{WM9713_ID2, 1, WM_READS(120), 120},
-+	{WM9713_ID2, 2, WM_READS(154), 154},
-+	{WM9713_ID2, 3, WM_READS(188), 188},
-+};
-+
-+/* continuous speed index */
-+static int sp_idx;
-+static u16 last, tries;
-+
-+/*
-+ * Pen sampling frequency (Hz) in continuous mode.
-+ */
-+static int cont_rate = 200;
-+module_param(cont_rate, int, 0);
-+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
-+
-+/*
-+ * Pen down detection.
-+ *
-+ * This driver can either poll or use an interrupt to indicate a pen down
-+ * event. If the irq request fails then it will fall back to polling mode.
-+ */
-+static int pen_int;
-+module_param(pen_int, int, 0);
-+MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
-+
-+/*
-+ * Pressure readback.
-+ *
-+ * Set to 1 to read back pen down pressure
-+ */
-+static int pressure;
-+module_param(pressure, int, 0);
-+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
-+
-+/*
-+ * AC97 touch data slot.
-+ *
-+ * Touch screen readback data ac97 slot
-+ */
-+static int ac97_touch_slot = 5;
-+module_param(ac97_touch_slot, int, 0);
-+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
-+
-+
-+/* flush AC97 slot 5 FIFO on pxa machines */
-+#ifdef CONFIG_PXA27x
-+static void wm97xx_acc_pen_up(struct wm97xx *wm)
-+{
-+	set_current_state(TASK_INTERRUPTIBLE);
-+	schedule_timeout(1);
-+
-+	while (MISR & (1 << 2))
-+		MODR;
-+}
-+#else
-+static void wm97xx_acc_pen_up(struct wm97xx *wm)
-+{
-+	int count = 16;
-+	set_current_state(TASK_INTERRUPTIBLE);
-+	schedule_timeout(1);
-+
-+	while (count < 16) {
-+		MODR;
-+		count--;
-+	}
-+}
-+#endif
-+
-+static int wm97xx_acc_pen_down(struct wm97xx *wm)
-+{
-+	u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
-+	int reads = 0;
-+
-+	/* data is never immediately available after pen down irq */
-+	set_current_state(TASK_INTERRUPTIBLE);
-+	schedule_timeout(1);
-+
-+	if (tries > 5) {
-+		tries = 0;
-+		return RC_PENUP;
-+	}
-+
-+	x = MODR;
-+	if (x == last) {
-+		tries++;
-+		return RC_AGAIN;
-+	}
-+	last = x;
-+	do {
-+		if (reads)
-+			x = MODR;
-+		y = MODR;
-+		if (pressure)
-+			p = MODR;
-+
-+		/* are samples valid */
-+		if ((x & 0x7000) != WM97XX_ADCSEL_X ||
-+			(y & 0x7000) != WM97XX_ADCSEL_Y ||
-+			(p & 0x7000) != WM97XX_ADCSEL_PRES)
-+			goto up;
-+
-+		/* coordinate is good */
-+		tries = 0;
-+		input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
-+		input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
-+		input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
-+		input_sync(wm->input_dev);
-+		reads++;
-+	} while (reads < cinfo[sp_idx].reads);
-+up:
-+	return RC_PENDOWN | RC_AGAIN;
-+}
-+
-+static int wm97xx_acc_startup(struct wm97xx *wm)
-+{
-+	int idx = 0;
-+
-+	/* check we have a codec */
-+	if (wm->ac97 == NULL)
-+		return -ENODEV;
-+
-+	/* Go you big red fire engine */
-+	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
-+		if (wm->id != cinfo[idx].id)
-+			continue;
-+		sp_idx = idx;
-+		if (cont_rate <= cinfo[idx].speed)
-+			break;
-+	}
-+	wm->acc_rate = cinfo[sp_idx].code;
-+	wm->acc_slot = ac97_touch_slot;
-+	dev_info(wm->dev,
-+		 "mainstone accelerated touchscreen driver, %d samples/sec\n",
-+		 cinfo[sp_idx].speed);
-+
-+	/* codec specific irq config */
-+	if (pen_int) {
-+		switch (wm->id) {
-+		case WM9705_ID2:
-+			wm->pen_irq = IRQ_GPIO(4);
-+			set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
-+			break;
-+		case WM9712_ID2:
-+		case WM9713_ID2:
-+			/* enable pen down interrupt */
-+			/* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
-+			wm->pen_irq = MAINSTONE_AC97_IRQ;
-+			wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
-+					   WM97XX_GPIO_POL_HIGH,
-+					   WM97XX_GPIO_STICKY,
-+					   WM97XX_GPIO_WAKE);
-+			wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
-+					   WM97XX_GPIO_POL_HIGH,
-+					   WM97XX_GPIO_NOTSTICKY,
-+					   WM97XX_GPIO_NOWAKE);
-+			break;
-+		default:
-+			dev_err(wm->dev,
-+				"pen down irq not supported on this device\n");
-+			pen_int = 0;
-+			break;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static void wm97xx_acc_shutdown(struct wm97xx *wm)
-+{
-+	/* codec specific deconfig */
-+	if (pen_int) {
-+		switch (wm->id & 0xffff) {
-+		case WM9705_ID2:
-+			wm->pen_irq = 0;
-+			break;
-+		case WM9712_ID2:
-+		case WM9713_ID2:
-+			/* disable interrupt */
-+			wm->pen_irq = 0;
-+			break;
-+		}
-+	}
-+}
-+
-+static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
-+{
-+	if (enable)
-+		enable_irq(wm->pen_irq);
-+	else
-+		disable_irq(wm->pen_irq);
-+}
-+
-+static struct wm97xx_mach_ops mainstone_mach_ops = {
-+	.acc_enabled = 1,
-+	.acc_pen_up = wm97xx_acc_pen_up,
-+	.acc_pen_down = wm97xx_acc_pen_down,
-+	.acc_startup = wm97xx_acc_startup,
-+	.acc_shutdown = wm97xx_acc_shutdown,
-+	.irq_enable = wm97xx_irq_enable,
-+};
-+
-+static int mainstone_wm97xx_probe(struct platform_device *pdev)
-+{
-+	struct wm97xx *wm = platform_get_drvdata(pdev);
-+	return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
-+}
-+
-+static int mainstone_wm97xx_remove(struct platform_device *pdev)
-+{
-+	struct wm97xx *wm = platform_get_drvdata(pdev);
-+	wm97xx_unregister_mach_ops(wm);
-+	return 0;
-+}
-+
-+static struct platform_driver mainstone_wm97xx_driver = {
-+	.probe = mainstone_wm97xx_probe,
-+	.remove = mainstone_wm97xx_remove,
-+	.driver = {
-+		.name = "wm97xx-touch",
-+	},
-+};
-+
-+static int __init mainstone_wm97xx_init(void)
-+{
-+	return platform_driver_register(&mainstone_wm97xx_driver);
-+}
-+
-+static void __exit mainstone_wm97xx_exit(void)
-+{
-+	platform_driver_unregister(&mainstone_wm97xx_driver);
-+}
-+
-+module_init(mainstone_wm97xx_init);
-+module_exit(mainstone_wm97xx_exit);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
-+MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
-+MODULE_LICENSE("GPL");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0035-Build-system-and-MAINTAINERS-entry-for-WM97xx-touchs.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0035-Build-system-and-MAINTAINERS-entry-for-WM97xx-touchs.patch
deleted file mode 100644
index aa0918f43e..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0035-Build-system-and-MAINTAINERS-entry-for-WM97xx-touchs.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From eba6a504393932764a33aae64021827dd2c5c70c Mon Sep 17 00:00:00 2001
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Date: Sat, 26 Jan 2008 21:14:18 +0300
-Subject: [PATCH 35/64] Build system and MAINTAINERS entry for WM97xx touchscreen drivers
-
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
----
- MAINTAINERS                        |   10 +++++++
- drivers/input/touchscreen/Kconfig  |   52 ++++++++++++++++++++++++++++++++++++
- drivers/input/touchscreen/Makefile |    7 +++++
- 3 files changed, 69 insertions(+), 0 deletions(-)
-
-diff --git a/MAINTAINERS b/MAINTAINERS
-index 2340cfb..f02851c 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -4204,6 +4204,16 @@ L:	linux-wireless@vger.kernel.org
- W:	http://oops.ghostprotocols.net:81/blog
- S:	Maintained
- 
-+WM97XX TOUCHSCREEN DRIVERS
-+P:	Mark Brown
-+M:	broonie@opensource.wolfsonmicro.com
-+P:	Liam Girdwood
-+M:	liam.girdwood@wolfsonmicro.com
-+L:	linux-input@vger.kernel.org
-+T:	git git://opensource.wolfsonmicro.com/linux-2.6-touch
-+W:	http://opensource.wolfsonmicro.com/node/7
-+S:	Supported
-+
- X.25 NETWORK LAYER
- P:	Henner Eisen
- M:	eis@baty.hanse.de
-diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
-index 90e8e92..0be05a2 100644
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -158,6 +158,58 @@ config TOUCHSCREEN_TOUCHRIGHT
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called touchright.
- 
-+config TOUCHSCREEN_WM97XX
-+	tristate "Support for WM97xx AC97 touchscreen controllers"
-+	depends on AC97_BUS
-+
-+config TOUCHSCREEN_WM9705
-+	bool "WM9705 Touchscreen interface support"
-+	depends on TOUCHSCREEN_WM97XX
-+	help
-+	  Say Y here if you have a Wolfson Microelectronics WM9705 touchscreen
-+	  controller connected to your system.
-+
-+	  If unsure, say N.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called wm9705.
-+
-+config TOUCHSCREEN_WM9712
-+	bool "WM9712 Touchscreen interface support"
-+	depends on TOUCHSCREEN_WM97XX
-+	help
-+	  Say Y here if you have a Wolfson Microelectronics WM9712 touchscreen
-+	  controller connected to your system.
-+
-+	  If unsure, say N.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called wm9712.
-+
-+config TOUCHSCREEN_WM9713
-+	bool "WM9713 Touchscreen interface support"
-+	depends on TOUCHSCREEN_WM97XX
-+	help
-+	  Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
-+	  controller connected to your system.
-+
-+	  If unsure, say N.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called wm9713.
-+
-+config TOUCHSCREEN_WM97XX_MAINSTONE
-+	tristate "WM97xx Mainstone accelerated touch"
-+	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
-+	help
-+	  Say Y here for support for streaming mode with WM97xx touchscreens
-+	  on Mainstone systems.
-+
-+	  If unsure, say N
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called mainstone-wm97xx
-+
- config TOUCHSCREEN_TOUCHWIN
- 	tristate "Touchwin serial touchscreen"
- 	select SERIO
-diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
-index 35d4097..d38156e 100644
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -4,6 +4,8 @@
- 
- # Each configuration option enables a list of files.
- 
-+wm97xx-ts-y := wm97xx-core.o
-+
- obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
- obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
- obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
-@@ -19,3 +21,8 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
- obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
- obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
- obj-$(CONFIG_TOUCHSCREEN_TSC2101)	+= tsc2101_ts.o
-+obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
-+obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
-+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)  += wm9705.o
-+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)  += wm9712.o
-+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)  += wm9713.o
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0036-Set-id-to-1-for-wm97xx-subdevices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0036-Set-id-to-1-for-wm97xx-subdevices.patch
deleted file mode 100644
index dd10b34586..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0036-Set-id-to-1-for-wm97xx-subdevices.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 9ea478cbd5473f52ca036cccc00dddad717d7861 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 30 Jan 2008 19:27:13 +0300
-Subject: [PATCH 36/64] Set id to -1 for wm97xx subdevices
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/input/touchscreen/wm97xx-core.c |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
-index 27a0a99..e066acc 100644
---- a/drivers/input/touchscreen/wm97xx-core.c
-+++ b/drivers/input/touchscreen/wm97xx-core.c
-@@ -592,7 +592,7 @@ static int wm97xx_probe(struct device *dev)
- 	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
- 
- 	/* register our battery device */
--	wm->battery_dev = platform_device_alloc("wm97xx-battery", 0);
-+	wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
- 	if (!wm->battery_dev)
- 		goto batt_err;
- 	platform_set_drvdata(wm->battery_dev, wm);
-@@ -603,7 +603,7 @@ static int wm97xx_probe(struct device *dev)
- 
- 	/* register our extended touch device (for machine specific
- 	 * extensions) */
--	wm->touch_dev = platform_device_alloc("wm97xx-touch", 0);
-+	wm->touch_dev = platform_device_alloc("wm97xx-touch", -1);
- 	if (!wm->touch_dev)
- 		goto touch_err;
- 	platform_set_drvdata(wm->touch_dev, wm);
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0037-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0037-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch
deleted file mode 100644
index 010194dd96..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0037-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From d2888c7643b07687b14a839239cbe7fc5bf565e6 Mon Sep 17 00:00:00 2001
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Date: Mon, 14 Jan 2008 23:24:26 +0300
-Subject: [PATCH 37/64] Don't lock the codec list in snd_soc_dapm_new_widgets()
-
-snd_soc_dapm_new_widgets() takes the codec lock when adding new widgets,
-causing lockdep warnings when applications later call down through ALSA
-to adjust controls.  Since widgets are only added during probe this lock
-should be unneeded so don't take it.
-
-Thanks to Dmitry Baryshkov <dbaryshkov@gmail.com> for reporting this issue.
-
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- sound/soc/soc-dapm.c |    2 --
- 1 files changed, 0 insertions(+), 2 deletions(-)
-
-diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
-index 29a546f..e46cdc5 100644
---- a/sound/soc/soc-dapm.c
-+++ b/sound/soc/soc-dapm.c
-@@ -963,7 +963,6 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec)
- {
- 	struct snd_soc_dapm_widget *w;
- 
--	mutex_lock(&codec->mutex);
- 	list_for_each_entry(w, &codec->dapm_widgets, list)
- 	{
- 		if (w->new)
-@@ -998,7 +997,6 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec)
- 	}
- 
- 	dapm_power_widgets(codec, SND_SOC_DAPM_STREAM_NOP);
--	mutex_unlock(&codec->mutex);
- 	return 0;
- }
- EXPORT_SYMBOL_GPL(snd_soc_dapm_new_widgets);
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0038-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0038-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch
deleted file mode 100644
index 7a3eb61a27..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0038-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 5bae1fab16c7b14a458aa90e5654fe3a1d8d960f Mon Sep 17 00:00:00 2001
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-Date: Sun, 20 Jan 2008 00:06:06 +0300
-Subject: [PATCH 38/64] Don't lock the codec list in snd_soc_dapm_new_widgets()
-
-On Wed, Jan 16, 2008 at 02:40:55AM +0300, Dmitry wrote:
-
-> I'm sorry, but I tested this patch only now. And I just got another
-> message from lockdep:
-
-Could you give this patch a try, please?
----
- sound/soc/soc-core.c |    7 +++++--
- 1 files changed, 5 insertions(+), 2 deletions(-)
-
-diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
-index e6a67b5..7f3ed9f 100644
---- a/sound/soc/soc-core.c
-+++ b/sound/soc/soc-core.c
-@@ -1090,7 +1090,6 @@ int snd_soc_register_card(struct snd_soc_device *socdev)
- 	struct snd_soc_machine *machine = socdev->machine;
- 	int ret = 0, i, ac97 = 0, err = 0;
- 
--	mutex_lock(&codec->mutex);
- 	for(i = 0; i < machine->num_links; i++) {
- 		if (socdev->machine->dai_link[i].init) {
- 			err = socdev->machine->dai_link[i].init(codec);
-@@ -1116,12 +1115,14 @@ int snd_soc_register_card(struct snd_soc_device *socdev)
- 		goto out;
- 	}
- 
-+	mutex_lock(&codec->mutex);
- #ifdef CONFIG_SND_SOC_AC97_BUS
- 	if (ac97) {
- 		ret = soc_ac97_dev_register(codec);
- 		if (ret < 0) {
- 			printk(KERN_ERR "asoc: AC97 device register failed\n");
- 			snd_card_free(codec->card);
-+			mutex_unlock(&codec->mutex);
- 			goto out;
- 		}
- 	}
-@@ -1134,8 +1135,10 @@ int snd_soc_register_card(struct snd_soc_device *socdev)
- 	err = device_create_file(socdev->dev, &dev_attr_codec_reg);
- 	if (err < 0)
- 		printk(KERN_WARNING "asoc: failed to add codec sysfs entries\n");
--out:
-+
- 	mutex_unlock(&codec->mutex);
-+
-+out:
- 	return ret;
- }
- EXPORT_SYMBOL_GPL(snd_soc_register_card);
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0039-Add-generic-framework-for-managing-clocks.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0039-Add-generic-framework-for-managing-clocks.patch
deleted file mode 100644
index c09c208c6a..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0039-Add-generic-framework-for-managing-clocks.patch
+++ /dev/null
@@ -1,446 +0,0 @@
-From 62c9a23cfa7181369637d0b61a8e90c83c562f03 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Mon, 4 Feb 2008 03:01:06 +0300
-Subject: [PATCH 39/64] Add generic framework for managing clocks.
-
-Provide a generic framework that platform may choose
-to support clocks api. In particular this provides
-platform-independant struct clk definition, a full
-implementation of clocks api and a set of functions
-for registering and unregistering clocks in a safe way.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- include/linux/clklib.h |   85 ++++++++++++++
- init/Kconfig           |    7 +
- kernel/Makefile        |    1 +
- kernel/clklib.c        |  295 ++++++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 388 insertions(+), 0 deletions(-)
- create mode 100644 include/linux/clklib.h
- create mode 100644 kernel/clklib.c
-
-diff --git a/include/linux/clklib.h b/include/linux/clklib.h
-new file mode 100644
-index 0000000..4bd9b4a
---- /dev/null
-+++ b/include/linux/clklib.h
-@@ -0,0 +1,85 @@
-+/*
-+ * Copyright (C) 2008 Dmitry Baryshkov
-+ *
-+ * This file is released under the GPL v2.
-+ */
-+
-+#ifndef CLKLIB_H
-+#define CLKLIB_H
-+
-+#include <linux/list.h>
-+
-+struct clk {
-+	struct list_head node;
-+	struct clk	*parent;
-+
-+	const char	*name;
-+	struct module	*owner;
-+
-+	int		users;
-+	unsigned long	rate;
-+	int		delay;
-+
-+	int (*can_get)	(struct clk *, struct device *);
-+	int (*set_parent) (struct clk *, struct clk *);
-+	int (*enable)	(struct clk *);
-+	void (*disable)	(struct clk *);
-+	unsigned long (*getrate) (struct clk*);
-+	int (*setrate)	(struct clk *, unsigned long);
-+	long (*roundrate) (struct clk *, unsigned long);
-+
-+	void		*priv;
-+};
-+
-+int clk_register(struct clk *clk);
-+void clk_unregister(struct clk *clk);
-+static void __maybe_unused clks_register(struct clk *clks, size_t num)
-+{
-+	int i;
-+	for (i = 0; i < num; i++) {
-+		clk_register(&clks[i]);
-+	}
-+}
-+
-+
-+int clk_alloc_function(const char *parent, struct clk *clk);
-+
-+struct clk_function {
-+	const char *parent;
-+	struct clk *clk;
-+};
-+
-+#define CLK_FUNC(_clock, _function, _can_get, _data, _format) \
-+	{						\
-+		.parent = _clock,			\
-+		.clk = &(struct clk) {			\
-+			.name= _function,		\
-+			.owner = THIS_MODULE,		\
-+			.can_get = _can_get,		\
-+			.priv = _data,			\
-+			.format = _format,		\
-+		},					\
-+	}
-+
-+static int __maybe_unused clk_alloc_functions(
-+		struct clk_function *funcs,
-+		int num)
-+{
-+	int i;
-+	int rc;
-+
-+	for (i = 0; i < num; i++) {
-+		rc = clk_alloc_function(funcs[i].parent, funcs[i].clk);
-+
-+		if (rc) {
-+			printk(KERN_ERR "Error allocating %s.%s function.\n",
-+					funcs[i].parent,
-+					funcs[i].clk->name);
-+			return rc;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+#endif
-diff --git a/init/Kconfig b/init/Kconfig
-index b9d11a8..05b62ba 100644
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -435,6 +435,13 @@ config CC_OPTIMIZE_FOR_SIZE
- config SYSCTL
- 	bool
- 
-+config HAVE_CLOCK_LIB
-+	bool
-+	help
-+	  Platforms select clocklib if they use this infrastructure
-+	  for managing their clocks both built into SoC and provided
-+	  by external devices.
-+
- menuconfig EMBEDDED
- 	bool "Configure standard kernel features (for small systems)"
- 	help
-diff --git a/kernel/Makefile b/kernel/Makefile
-index 6d9a87c..0b2ade7 100644
---- a/kernel/Makefile
-+++ b/kernel/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
- obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o
- obj-$(CONFIG_MARKERS) += marker.o
- obj-$(CONFIG_LATENCYTOP) += latencytop.o
-+obj-$(CONFIG_HAVE_CLOCK_LIB) += clklib.o
- 
- ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)
- # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
-diff --git a/kernel/clklib.c b/kernel/clklib.c
-new file mode 100644
-index 0000000..203af3d
---- /dev/null
-+++ b/kernel/clklib.c
-@@ -0,0 +1,295 @@
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/clklib.h>
-+#include <linux/spinlock.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+
-+static LIST_HEAD(clocks);
-+static DEFINE_SPINLOCK(clocks_lock);
-+
-+static int __clk_register(struct clk *clk)
-+{
-+	if (clk->parent &&
-+	    !try_module_get(clk->parent->owner))
-+		return -EINVAL;
-+
-+	list_add_tail(&clk->node, &clocks);
-+
-+	return 0;
-+}
-+
-+int clk_register(struct clk *clk)
-+{
-+	unsigned long flags;
-+	int rc;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	rc = __clk_register(clk);
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return rc;
-+}
-+EXPORT_SYMBOL(clk_register);
-+
-+void clk_unregister(struct clk *clk)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+	list_del(&clk->node);
-+	if (clk->parent)
-+		module_put(clk->parent->owner);
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+}
-+EXPORT_SYMBOL(clk_unregister);
-+
-+struct clk *clk_get(struct device *dev, const char *id)
-+{
-+	struct clk *p, *clk = ERR_PTR(-ENOENT);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	list_for_each_entry(p, &clocks, node) {
-+		if (strcmp(id, p->name) == 0 &&
-+		    (!p->can_get || p->can_get(p, dev)) &&
-+		    try_module_get(p->owner)) {
-+			clk = p;
-+			break;
-+		}
-+	}
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return clk;
-+}
-+EXPORT_SYMBOL(clk_get);
-+
-+void clk_put(struct clk *clk)
-+{
-+	unsigned long flags;
-+
-+	if (!clk || IS_ERR(clk))
-+		return;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	module_put(clk->owner);
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+}
-+EXPORT_SYMBOL(clk_put);
-+
-+int clk_set_parent(struct clk *clk, struct clk *parent)
-+{
-+	int rc;
-+	unsigned long flags;
-+
-+	if (!clk || IS_ERR(clk))
-+		return -EINVAL;
-+
-+	if (!clk->set_parent)
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	rc = clk->set_parent(clk, parent);
-+	if (!rc)
-+		clk->parent = parent;
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return rc;
-+}
-+EXPORT_SYMBOL(clk_set_parent);
-+
-+static int __clk_enable(struct clk *clk)
-+{
-+	int rc = 0;
-+
-+	if (clk->parent) {
-+		rc = __clk_enable(clk->parent);
-+
-+		if (rc)
-+			return rc;
-+	}
-+
-+	if (clk->users++ == 0)
-+		if (clk->enable)
-+			rc = clk->enable(clk);
-+
-+	if (clk->delay)
-+		udelay(clk->delay);
-+
-+	return rc;
-+}
-+
-+int clk_enable(struct clk *clk)
-+{
-+	unsigned long flags;
-+	int rc;
-+
-+	if (!clk || IS_ERR(clk))
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	rc = __clk_enable(clk);
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return rc;
-+}
-+EXPORT_SYMBOL(clk_enable);
-+
-+static void __clk_disable(struct clk *clk)
-+{
-+	if (clk->users <= 0) {
-+		WARN_ON(1);
-+		return;
-+	}
-+
-+	if (--clk->users == 0)
-+		if (clk->disable)
-+			clk->disable(clk);
-+
-+	if (clk->parent)
-+		__clk_disable(clk->parent);
-+}
-+
-+void clk_disable(struct clk *clk)
-+{
-+	unsigned long flags;
-+
-+	if (!clk || IS_ERR(clk))
-+		return;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	__clk_disable(clk);
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+}
-+EXPORT_SYMBOL(clk_disable);
-+
-+static unsigned long __clk_get_rate(struct clk *clk)
-+{
-+	unsigned long rate = 0;
-+
-+	for (;;) {
-+		if (rate || !clk)
-+			return rate;
-+
-+		if (clk->getrate)
-+			rate = clk->getrate(clk);
-+		else if (clk->rate)
-+			rate = clk->rate;
-+		else
-+			clk = clk->parent;
-+	}
-+}
-+
-+unsigned long clk_get_rate(struct clk *clk)
-+{
-+	unsigned long rate = 0;
-+	unsigned long flags;
-+
-+	if (!clk || IS_ERR(clk))
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	rate = __clk_get_rate(clk);
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return rate;
-+}
-+EXPORT_SYMBOL(clk_get_rate);
-+
-+long clk_round_rate(struct clk *clk, unsigned long rate)
-+{
-+	long res;
-+	unsigned long flags;
-+
-+	if (!clk || IS_ERR(clk))
-+		return -EINVAL;
-+
-+	if (!clk->roundrate)
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	res = clk->roundrate(clk, rate);
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return res;
-+}
-+EXPORT_SYMBOL(clk_round_rate);
-+
-+int clk_set_rate(struct clk *clk, unsigned long rate)
-+{
-+	int rc;
-+	unsigned long flags;
-+
-+	if (!clk || IS_ERR(clk))
-+		return -EINVAL;
-+
-+	if (!clk->setrate)
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	rc = clk->setrate(clk, rate);
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return rc;
-+}
-+EXPORT_SYMBOL(clk_set_rate);
-+
-+int clk_alloc_function(const char *parent, struct clk *clk)
-+{
-+	int rc = 0;
-+	unsigned long flags;
-+	struct clk *pclk;
-+	bool found = false;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	list_for_each_entry(pclk, &clocks, node) {
-+		if (strcmp(parent, pclk->name) == 0 &&
-+		    try_module_get(pclk->owner)) {
-+			found = true;
-+			break;
-+		}
-+	}
-+
-+	if (!found) {
-+		rc = -ENODEV;
-+		goto out;
-+	}
-+
-+	clk->parent = pclk;
-+
-+	__clk_register(clk);
-+	/*
-+	 * We locked parent owner during search
-+	 * and also in __clk_register. Free one reference
-+	 */
-+	module_put(pclk->owner);
-+
-+out:
-+	if (rc) {
-+		kfree(clk);
-+	}
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return rc;
-+}
-+EXPORT_SYMBOL(clk_alloc_function);
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0040-Clocklib-debugfs-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0040-Clocklib-debugfs-support.patch
deleted file mode 100644
index 160b274f4f..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0040-Clocklib-debugfs-support.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From cae12d96586dac77d223559d686487ea2d457a41 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Mon, 4 Feb 2008 03:01:05 +0300
-Subject: [PATCH 40/64] Clocklib debugfs support
-
-Provide /sys/kernel/debug/clock to ease debugging.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- include/linux/clklib.h |    5 +++
- kernel/clklib.c        |   68 ++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 73 insertions(+), 0 deletions(-)
-
-diff --git a/include/linux/clklib.h b/include/linux/clklib.h
-index 4bd9b4a..f916693 100644
---- a/include/linux/clklib.h
-+++ b/include/linux/clklib.h
-@@ -28,6 +28,11 @@ struct clk {
- 	int (*setrate)	(struct clk *, unsigned long);
- 	long (*roundrate) (struct clk *, unsigned long);
- 
-+	/*
-+	 * format any additional info
-+	 */
-+	int (*format)	(struct clk *, struct seq_file *);
-+
- 	void		*priv;
- };
- 
-diff --git a/kernel/clklib.c b/kernel/clklib.c
-index 203af3d..b782220 100644
---- a/kernel/clklib.c
-+++ b/kernel/clklib.c
-@@ -293,3 +293,71 @@ out:
- 	return rc;
- }
- EXPORT_SYMBOL(clk_alloc_function);
-+
-+#ifdef CONFIG_DEBUG_FS
-+
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+static void dump_clocks(struct seq_file *s, struct clk *parent, int nest)
-+{
-+	struct clk *clk;
-+	int i;
-+
-+	list_for_each_entry(clk, &clocks, node) {
-+		if (clk->parent == parent) {
-+			for (i = 0; i < nest; i++)
-+				seq_putc(s, ' ');
-+			seq_puts(s, clk->name);
-+
-+			i = nest + strlen(clk->name);
-+			if (i >= 16)
-+				i = 15;
-+			for (; i < 16; i++)
-+				seq_putc(s, ' ');
-+			seq_printf(s, "%c use=%d rate=%lu KHz",
-+				clk->set_parent ? '*' : ' ',
-+				clk->users,
-+				__clk_get_rate(clk));
-+			if (clk->format)
-+				clk->format(clk, s);
-+			seq_putc(s, '\n');
-+
-+			dump_clocks(s, clk, nest + 1);
-+		}
-+	}
-+}
-+
-+static int clocklib_show(struct seq_file *s, void *unused)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&clocks_lock, flags);
-+
-+	dump_clocks(s, NULL, 0);
-+
-+	spin_unlock_irqrestore(&clocks_lock, flags);
-+
-+	return 0;
-+}
-+
-+static int clocklib_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, clocklib_show, NULL);
-+}
-+
-+static struct file_operations clocklib_operations = {
-+	.open		= clocklib_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+
-+static int __init clocklib_debugfs_init(void)
-+{
-+	debugfs_create_file("clock", S_IFREG | S_IRUGO,
-+				NULL, NULL, &clocklib_operations);
-+	return 0;
-+}
-+subsys_initcall(clocklib_debugfs_init);
-+
-+#endif /* DEBUG_FS */
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0041-From-80a359e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0041-From-80a359e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch
deleted file mode 100644
index 9c95c67e78..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0041-From-80a359e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch
+++ /dev/null
@@ -1,593 +0,0 @@
-From 2a143b9546b01fd6c58ebaac7eb46568a17d6a41 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Tue, 12 Feb 2008 04:58:59 +0300
-Subject: [PATCH 41/64] From 80a359e60c2aec59ccf4fca0a7fd20495f82b1d2 Mon Sep 17 00:00:00 2001
- In-Reply-To: <20080207005839.GA28509@doriath.ww600.siemens.net>
- References: <20080207005839.GA28509@doriath.ww600.siemens.net>
- Date: Thu, 7 Feb 2008 03:35:08 +0300
- Subject: [PATCH 3/5] Use clocklib for ARM pxa sub-arch.
- Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
-
----
- arch/arm/Kconfig           |    1 +
- arch/arm/mach-pxa/clock.c  |  108 ++++++--------------------------------------
- arch/arm/mach-pxa/clock.h  |   58 +++++++++++++-----------
- arch/arm/mach-pxa/pxa25x.c |   64 +++++++++++++++-----------
- arch/arm/mach-pxa/pxa27x.c |   61 +++++++++++++-----------
- arch/arm/mach-pxa/pxa3xx.c |   91 +++++++++++++++++++++----------------
- 6 files changed, 169 insertions(+), 214 deletions(-)
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 423e953..47f3c73 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -347,6 +347,7 @@ config ARCH_PXA
- 	select GENERIC_CLOCKEVENTS
- 	select TICK_ONESHOT
- 	select HAVE_GPIO_LIB
-+	select HAVE_CLOCK_LIB
- 	help
- 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
- 
-diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
-index 83ef5ec..3296b02 100644
---- a/arch/arm/mach-pxa/clock.c
-+++ b/arch/arm/mach-pxa/clock.c
-@@ -8,6 +8,7 @@
- #include <linux/err.h>
- #include <linux/string.h>
- #include <linux/clk.h>
-+#include <linux/clklib.h>
- #include <linux/spinlock.h>
- #include <linux/platform_device.h>
- #include <linux/delay.h>
-@@ -19,123 +20,42 @@
- #include "generic.h"
- #include "clock.h"
- 
--static LIST_HEAD(clocks);
--static DEFINE_MUTEX(clocks_mutex);
--static DEFINE_SPINLOCK(clocks_lock);
--
--struct clk *clk_get(struct device *dev, const char *id)
--{
--	struct clk *p, *clk = ERR_PTR(-ENOENT);
--
--	mutex_lock(&clocks_mutex);
--	list_for_each_entry(p, &clocks, node) {
--		if (strcmp(id, p->name) == 0 &&
--		    (p->dev == NULL || p->dev == dev)) {
--			clk = p;
--			break;
--		}
--	}
--	mutex_unlock(&clocks_mutex);
--
--	return clk;
--}
--EXPORT_SYMBOL(clk_get);
--
--void clk_put(struct clk *clk)
-+static int clk_gpio27_enable(struct clk *clk)
- {
--}
--EXPORT_SYMBOL(clk_put);
--
--int clk_enable(struct clk *clk)
--{
--	unsigned long flags;
--
--	spin_lock_irqsave(&clocks_lock, flags);
--	if (clk->enabled++ == 0)
--		clk->ops->enable(clk);
--	spin_unlock_irqrestore(&clocks_lock, flags);
--
--	if (clk->delay)
--		udelay(clk->delay);
-+	pxa_gpio_mode(GPIO11_3_6MHz_MD);
- 
- 	return 0;
- }
--EXPORT_SYMBOL(clk_enable);
--
--void clk_disable(struct clk *clk)
--{
--	unsigned long flags;
--
--	WARN_ON(clk->enabled == 0);
--
--	spin_lock_irqsave(&clocks_lock, flags);
--	if (--clk->enabled == 0)
--		clk->ops->disable(clk);
--	spin_unlock_irqrestore(&clocks_lock, flags);
--}
--EXPORT_SYMBOL(clk_disable);
--
--unsigned long clk_get_rate(struct clk *clk)
--{
--	unsigned long rate;
--
--	rate = clk->rate;
--	if (clk->ops->getrate)
--		rate = clk->ops->getrate(clk);
--
--	return rate;
--}
--EXPORT_SYMBOL(clk_get_rate);
--
--
--static void clk_gpio27_enable(struct clk *clk)
--{
--	pxa_gpio_mode(GPIO11_3_6MHz_MD);
--}
- 
- static void clk_gpio27_disable(struct clk *clk)
- {
-+	/* FIXME: disable clock */
- }
- 
--static const struct clkops clk_gpio27_ops = {
--	.enable		= clk_gpio27_enable,
--	.disable	= clk_gpio27_disable,
--};
--
--
--void clk_cken_enable(struct clk *clk)
-+int clk_cken_enable(struct clk *clk)
- {
--	CKEN |= 1 << clk->cken;
-+	int cken = ((struct clk_cken_priv *)clk->priv)->cken;
-+	CKEN |= 1 << cken;
-+
-+	return 0;
- }
- 
- void clk_cken_disable(struct clk *clk)
- {
--	CKEN &= ~(1 << clk->cken);
-+	int cken = ((struct clk_cken_priv *)clk->priv)->cken;
-+	CKEN &= ~(1 << cken);
- }
- 
--const struct clkops clk_cken_ops = {
--	.enable		= clk_cken_enable,
--	.disable	= clk_cken_disable,
--};
--
- static struct clk common_clks[] = {
- 	{
- 		.name		= "GPIO27_CLK",
--		.ops		= &clk_gpio27_ops,
- 		.rate		= 3686400,
-+		.owner		= THIS_MODULE,
-+		.enable		= clk_gpio27_enable,
-+		.disable	= clk_gpio27_disable,
- 	},
- };
- 
--void clks_register(struct clk *clks, size_t num)
--{
--	int i;
--
--	mutex_lock(&clocks_mutex);
--	for (i = 0; i < num; i++)
--		list_add(&clks[i].node, &clocks);
--	mutex_unlock(&clocks_mutex);
--}
--
- static int __init clk_init(void)
- {
- 	clks_register(common_clks, ARRAY_SIZE(common_clks));
-diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
-index bc6b77e..5d0d067 100644
---- a/arch/arm/mach-pxa/clock.h
-+++ b/arch/arm/mach-pxa/clock.h
-@@ -1,43 +1,47 @@
--struct clk;
-+#include <linux/clklib.h>
-+#include <linux/seq_file.h>
- 
--struct clkops {
--	void			(*enable)(struct clk *);
--	void			(*disable)(struct clk *);
--	unsigned long		(*getrate)(struct clk *);
-+struct clk_cken_priv {
-+	unsigned int	cken;
- };
- 
--struct clk {
--	struct list_head	node;
--	const char		*name;
--	struct device		*dev;
--	const struct clkops	*ops;
--	unsigned long		rate;
--	unsigned int		cken;
--	unsigned int		delay;
--	unsigned int		enabled;
--};
--
--#define INIT_CKEN(_name, _cken, _rate, _delay, _dev)	\
-+#define INIT_CKEN(_name, _cken, _rate, _delay)		\
- 	{						\
- 		.name	= _name,			\
--		.dev	= _dev,				\
--		.ops	= &clk_cken_ops,		\
-+		.enable = clk_cken_enable,		\
-+		.disable = clk_cken_disable,		\
- 		.rate	= _rate,			\
--		.cken	= CKEN_##_cken,			\
- 		.delay	= _delay,			\
-+		.priv	= &(struct clk_cken_priv) {	\
-+			.cken = CKEN_##_cken,		\
-+		},					\
- 	}
- 
--#define INIT_CK(_name, _cken, _ops, _dev)		\
-+#define INIT_CK(_name, _cken, _getrate)			\
- 	{						\
- 		.name	= _name,			\
--		.dev	= _dev,				\
--		.ops	= _ops,				\
--		.cken	= CKEN_##_cken,			\
-+		.enable = clk_cken_enable,		\
-+		.disable = clk_cken_disable,		\
-+		.getrate = _getrate,			\
-+		.priv	= &(struct clk_cken_priv) {	\
-+			.cken = CKEN_##_cken,		\
-+		},					\
- 	}
- 
--extern const struct clkops clk_cken_ops;
--
--void clk_cken_enable(struct clk *clk);
-+int clk_cken_enable(struct clk *clk);
- void clk_cken_disable(struct clk *clk);
- 
- void clks_register(struct clk *clks, size_t num);
-+
-+static int __maybe_unused clk_dev_can_get(struct clk *clk, struct device *dev)
-+{
-+	return (dev == clk->priv);
-+}
-+
-+static int __maybe_unused clk_dev_format(struct clk *clk, struct seq_file *s)
-+{
-+	BUG_ON(!clk->priv);
-+	seq_puts(s, "for device ");
-+	seq_puts(s, ((struct device *)clk->priv)->bus_id);
-+	return 0;
-+}
-diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
-index 5988d99..ed3719b 100644
---- a/arch/arm/mach-pxa/pxa25x.c
-+++ b/arch/arm/mach-pxa/pxa25x.c
-@@ -100,40 +100,50 @@ static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk)
- 	return pxa25x_get_memclk_frequency_10khz() * 10000;
- }
- 
--static const struct clkops clk_pxa25x_lcd_ops = {
--	.enable		= clk_cken_enable,
--	.disable	= clk_cken_disable,
--	.getrate	= clk_pxa25x_lcd_getrate,
--};
--
- /*
-  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
-  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
-  * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
-  */
--static struct clk pxa25x_hwuart_clk =
--	INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
--;
-+static struct clk pxa25x_hwuart_clk[] = {
-+	INIT_CKEN("HWUARTCLK", HWUART, 14745600, 1),
-+	{
-+		.parent =	&pxa25x_hwuart_clk[0],
-+		.name	=	"UARTCLK",
-+		.can_get =	clk_dev_can_get,
-+		.priv	=	&pxa_device_hwuart.dev,
-+	},
-+};
- 
- static struct clk pxa25x_clks[] = {
--	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
--	INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
--	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
--	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
--	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
--	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
--	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
--
--	INIT_CKEN("SSPCLK",  SSP, 3686400, 0, &pxa25x_device_ssp.dev),
--	INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
--	INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
-+	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_getrate),
-+	INIT_CKEN("FFUARTCLK", FFUART, 14745600, 1),
-+	INIT_CKEN("BTUARTCLK", BTUART, 14745600, 1),
-+	INIT_CKEN("STUARTCLK", STUART, 14745600, 1),
-+	INIT_CKEN("UDCCLK", USB, 47923000, 5),
-+	INIT_CKEN("MMCCLK", MMC, 19169000, 0),
-+	INIT_CKEN("I2CCLK", I2C, 31949000, 0),
-+
-+	INIT_CKEN("SSP_CLK",  SSP, 3686400, 0),
-+	INIT_CKEN("NSSPCLK", NSSP, 3686400, 0),
-+	INIT_CKEN("ASSPCLK", ASSP, 3686400, 0),
- 
- 	/*
--	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
--	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
--	INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
-+	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0),
-+	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0),
-+	INIT_CKEN("I2SCLK",  I2S,  14745600, 0),
- 	*/
--	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
-+	INIT_CKEN("FICPCLK", FICP, 47923000, 0),
-+};
-+
-+static struct clk_function __initdata pxa25x_clk_funcs[] = {
-+	CLK_FUNC("FFUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_ffuart.dev, clk_dev_format),
-+	CLK_FUNC("BTUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_btuart.dev, clk_dev_format),
-+	CLK_FUNC("STUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_stuart.dev, clk_dev_format),
-+	CLK_FUNC("STUARTCLK", "SIRCLK", NULL, NULL, NULL),
-+	CLK_FUNC("SSP_CLK", "SSPCLK", clk_dev_can_get, &pxa25x_device_ssp.dev, clk_dev_format),
-+	CLK_FUNC("NSSPCLK", "SSPCLK", clk_dev_can_get, &pxa25x_device_nssp.dev, clk_dev_format),
-+	CLK_FUNC("ASSPCLK", "SSPCLK", clk_dev_can_get, &pxa25x_device_assp.dev, clk_dev_format),
- };
- 
- #ifdef CONFIG_PM
-@@ -313,11 +323,13 @@ static int __init pxa25x_init(void)
- 	int ret = 0;
- 
- 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
--	if (cpu_is_pxa25x())
--		clks_register(&pxa25x_hwuart_clk, 1);
-+	if (cpu_is_pxa25x()) {
-+		clks_register(pxa25x_hwuart_clk, ARRAY_SIZE(pxa25x_hwuart_clk));
-+	}
- 
- 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
- 		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
-+		clk_alloc_functions(pxa25x_clk_funcs, ARRAY_SIZE(pxa25x_clk_funcs));
- 
- 		if ((ret = pxa_init_dma(16)))
- 			return ret;
-diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
-index 30ca4fd..c51e7b2 100644
---- a/arch/arm/mach-pxa/pxa27x.c
-+++ b/arch/arm/mach-pxa/pxa27x.c
-@@ -126,44 +126,48 @@ static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
- 	return pxa27x_get_lcdclk_frequency_10khz() * 10000;
- }
- 
--static const struct clkops clk_pxa27x_lcd_ops = {
--	.enable		= clk_cken_enable,
--	.disable	= clk_cken_disable,
--	.getrate	= clk_pxa27x_lcd_getrate,
--};
--
- static struct clk pxa27x_clks[] = {
--	INIT_CK("LCDCLK", LCD,    &clk_pxa27x_lcd_ops, &pxa_device_fb.dev),
--	INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL),
-+	INIT_CK("LCDCLK", LCD,    &clk_pxa27x_lcd_getrate),
-+	INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_getrate),
- 
--	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
--	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
--	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
-+	INIT_CKEN("FFUARTCLK", FFUART, 14857000, 1),
-+	INIT_CKEN("BTUARTCLK", BTUART, 14857000, 1),
-+	INIT_CKEN("STUARTCLK", STUART, 14857000, 1),
- 
--	INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
--	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
--	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa_device_udc.dev),
--	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
--	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
-+	INIT_CKEN("I2SCLK",  I2S,  14682000, 0),
-+	INIT_CKEN("I2CCLK",  I2C,  32842000, 0),
-+	INIT_CKEN("UDCCLK",  USB,  48000000, 5),
-+	INIT_CKEN("MMCCLK",  MMC,  19500000, 0),
-+	INIT_CKEN("FICPCLK", FICP, 48000000, 0),
- 
--	INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev),
--	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
--	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
-+	INIT_CKEN("USBCLK", USBHOST, 48000000, 0),
-+	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0),
-+	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0),
- 
--	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
--	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
--	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
-+	INIT_CKEN("SSP1CLK", SSP1, 13000000, 0),
-+	INIT_CKEN("SSP2CLK", SSP2, 13000000, 0),
-+	INIT_CKEN("SSP3CLK", SSP3, 13000000, 0),
- 
- 	/*
--	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
--	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
--	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
--	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
--	INIT_CKEN("IMCLK",   IM,   0, 0, NULL),
--	INIT_CKEN("MEMCLK",  MEMC, 0, 0, NULL),
-+	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0),
-+	INIT_CKEN("MSLCLK",  MSL,  48000000, 0),
-+	INIT_CKEN("USIMCLK", USIM, 48000000, 0),
-+	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0),
-+	INIT_CKEN("IMCLK",   IM,   0, 0),
-+	INIT_CKEN("MEMCLK",  MEMC, 0, 0),
- 	*/
- };
- 
-+static struct clk_function __initdata pxa27x_clk_funcs[] = {
-+	CLK_FUNC("FFUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_ffuart.dev, clk_dev_format),
-+	CLK_FUNC("BTUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_btuart.dev, clk_dev_format),
-+	CLK_FUNC("STUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_stuart.dev, clk_dev_format),
-+	CLK_FUNC("STUARTCLK", "SIRCLK", NULL, NULL, NULL),
-+	CLK_FUNC("SSP1CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp1.dev, clk_dev_format),
-+	CLK_FUNC("SSP2CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp2.dev, clk_dev_format),
-+	CLK_FUNC("SSP3CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp3.dev, clk_dev_format),
-+};
-+
- #ifdef CONFIG_PM
- 
- #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-@@ -453,6 +457,7 @@ static int __init pxa27x_init(void)
- 	int ret = 0;
- 	if (cpu_is_pxa27x()) {
- 		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
-+		clk_alloc_functions(pxa27x_clk_funcs, ARRAY_SIZE(pxa27x_clk_funcs));
- 
- 		if ((ret = pxa_init_dma(32)))
- 			return ret;
-diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
-index ccab9da..0f8bbf3 100644
---- a/arch/arm/mach-pxa/pxa3xx.c
-+++ b/arch/arm/mach-pxa/pxa3xx.c
-@@ -122,27 +122,31 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
- 	return hsio_clk;
- }
- 
--static void clk_pxa3xx_cken_enable(struct clk *clk)
-+static int clk_pxa3xx_cken_enable(struct clk *clk)
- {
--	unsigned long mask = 1ul << (clk->cken & 0x1f);
-+	int cken = ((struct clk_cken_priv *)clk->priv)->cken;
-+	unsigned long mask = 1ul << (cken & 0x1f);
- 
- 	local_irq_disable();
- 
--	if (clk->cken < 32)
-+	if (cken < 32)
- 		CKENA |= mask;
- 	else
- 		CKENB |= mask;
- 
- 	local_irq_enable();
-+
-+	return 0;
- }
- 
- static void clk_pxa3xx_cken_disable(struct clk *clk)
- {
--	unsigned long mask = 1ul << (clk->cken & 0x1f);
-+	int cken = ((struct clk_cken_priv *)clk->priv)->cken;
-+	unsigned long mask = 1ul << (cken & 0x1f);
- 
- 	local_irq_disable();
- 
--	if (clk->cken < 32)
-+	if (cken < 32)
- 		CKENA &= ~mask;
- 	else
- 		CKENB &= ~mask;
-@@ -150,55 +154,63 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
- 	local_irq_enable();
- }
- 
--static const struct clkops clk_pxa3xx_cken_ops = {
--	.enable		= clk_pxa3xx_cken_enable,
--	.disable	= clk_pxa3xx_cken_disable,
--};
--
--static const struct clkops clk_pxa3xx_hsio_ops = {
--	.enable		= clk_pxa3xx_cken_enable,
--	.disable	= clk_pxa3xx_cken_disable,
--	.getrate	= clk_pxa3xx_hsio_getrate,
--};
--
--#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
-+#define PXA3xx_CKEN(_name, _cken, _rate, _delay)	\
- 	{						\
- 		.name	= _name,			\
--		.dev	= _dev,				\
--		.ops	= &clk_pxa3xx_cken_ops,		\
-+		.enable = clk_pxa3xx_cken_enable,	\
-+		.disable = clk_pxa3xx_cken_disable,	\
- 		.rate	= _rate,			\
--		.cken	= CKEN_##_cken,			\
- 		.delay	= _delay,			\
-+		.priv	= &(struct clk_cken_priv) {	\
-+			.cken = CKEN_##_cken,		\
-+		},					\
- 	}
- 
--#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
-+#define PXA3xx_CK(_name, _cken, _getrate)		\
- 	{						\
- 		.name	= _name,			\
--		.dev	= _dev,				\
--		.ops	= _ops,				\
--		.cken	= CKEN_##_cken,			\
-+		.enable = clk_pxa3xx_cken_enable,	\
-+		.disable = clk_pxa3xx_cken_disable,	\
-+		.getrate = _getrate,			\
-+		.priv	= &(struct clk_cken_priv) {	\
-+			.cken = CKEN_##_cken,		\
-+		},					\
- 	}
- 
- static struct clk pxa3xx_clks[] = {
--	PXA3xx_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
--	PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
-+	PXA3xx_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_getrate),
-+	PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_getrate),
- 
--	PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
--	PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
--	PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
-+	PXA3xx_CKEN("FFUARTCLK", FFUART, 14857000, 1),
-+	PXA3xx_CKEN("BTUARTCLK", BTUART, 14857000, 1),
-+	PXA3xx_CKEN("STUARTCLK", STUART, 14857000, 1),
- 
--	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
--	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
--	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
-+	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0),
-+	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5),
-+	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0),
- 
--	PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
--	PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
--	PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
--	PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
-+	PXA3xx_CKEN("SSP1CLK", SSP1, 13000000, 0),
-+	PXA3xx_CKEN("SSP2CLK", SSP2, 13000000, 0),
-+	PXA3xx_CKEN("SSP3CLK", SSP3, 13000000, 0),
-+	PXA3xx_CKEN("SSP4CLK", SSP4, 13000000, 0),
-+
-+	PXA3xx_CKEN("MMC1CLK", MMC1, 19500000, 0),
-+	PXA3xx_CKEN("MMC2CLK", MMC2, 19500000, 0),
-+	PXA3xx_CKEN("MMC3CLK", MMC3, 19500000, 0),
-+};
- 
--	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
--	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
--	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
-+static struct clk_function __initdata pxa3xx_clk_funcs[] = {
-+	CLK_FUNC("FFUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_ffuart.dev, clk_dev_format),
-+	CLK_FUNC("BTUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_btuart.dev, clk_dev_format),
-+	CLK_FUNC("STUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_stuart.dev, clk_dev_format),
-+	CLK_FUNC("STUARTCLK", "SIRCLK", NULL, NULL, NULL),
-+	CLK_FUNC("SSP1CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp1.dev, clk_dev_format),
-+	CLK_FUNC("SSP2CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp2.dev, clk_dev_format),
-+	CLK_FUNC("SSP3CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp3.dev, clk_dev_format),
-+	CLK_FUNC("SSP4CLK", "SSPCLK", clk_dev_can_get, &pxa3xx_device_ssp4.dev, clk_dev_format),
-+	CLK_FUNC("MMC1CLK", "MMCCLK", clk_dev_can_get, &pxa_device_mci.dev, clk_dev_format),
-+	CLK_FUNC("MMC2CLK", "MMCCLK", clk_dev_can_get, &pxa3xx_device_mci2.dev, clk_dev_format),
-+	CLK_FUNC("MMC3CLK", "MMCCLK", clk_dev_can_get, &pxa3xx_device_mci3.dev, clk_dev_format),
- };
- 
- #ifdef CONFIG_PM
-@@ -255,6 +267,7 @@ static int __init pxa3xx_init(void)
- 
- 	if (cpu_is_pxa3xx()) {
- 		clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
-+		clk_alloc_functions(pxa3xx_clk_funcs, ARRAY_SIZE(pxa3xx_clk_funcs));
- 
- 		if ((ret = pxa_init_dma(32)))
- 			return ret;
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0042-Use-correct-clock-for-IrDA-on-pxa.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0042-Use-correct-clock-for-IrDA-on-pxa.patch
deleted file mode 100644
index a605735df0..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0042-Use-correct-clock-for-IrDA-on-pxa.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 70dfe7e736467af6242c61092cb64f44d2fd50e3 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Mon, 4 Feb 2008 03:01:05 +0300
-Subject: [PATCH 42/64] Use correct clock for IrDA on pxa
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/net/irda/pxaficp_ir.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
-index 8c09344..36d2ec0 100644
---- a/drivers/net/irda/pxaficp_ir.c
-+++ b/drivers/net/irda/pxaficp_ir.c
-@@ -814,7 +814,7 @@ static int pxa_irda_probe(struct platform_device *pdev)
- 	si->dev = &pdev->dev;
- 	si->pdata = pdev->dev.platform_data;
- 
--	si->sir_clk = clk_get(&pdev->dev, "UARTCLK");
-+	si->sir_clk = clk_get(&pdev->dev, "SIRCLK");
- 	si->fir_clk = clk_get(&pdev->dev, "FICPCLK");
- 	if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) {
- 		err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk);
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch
deleted file mode 100644
index 22b8414b2d..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 3932e0f5c4c05200c030b60606ed2eb83550f4bb Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Mon, 4 Feb 2008 03:01:04 +0300
-Subject: [PATCH 43/64] Use clocklib for sa1100 sub-arch.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/Kconfig             |    1 +
- arch/arm/mach-sa1100/clock.c |   95 ++---------------------------------------
- 2 files changed, 6 insertions(+), 90 deletions(-)
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 47f3c73..fa47201 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -370,6 +370,7 @@ config ARCH_SA1100
- 	select ARCH_MTD_XIP
- 	select GENERIC_GPIO
- 	select GENERIC_TIME
-+	select HAVE_CLOCK_LIB
- 	help
- 	  Support for StrongARM 11x0 based boards.
- 
-diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
-index fc97fe5..6b3cc51 100644
---- a/arch/arm/mach-sa1100/clock.c
-+++ b/arch/arm/mach-sa1100/clock.c
-@@ -8,83 +8,13 @@
- #include <linux/err.h>
- #include <linux/string.h>
- #include <linux/clk.h>
-+#include <linux/clklib.h>
- #include <linux/spinlock.h>
- #include <linux/mutex.h>
- 
- #include <asm/hardware.h>
- 
--/*
-- * Very simple clock implementation - we only have one clock to
-- * deal with at the moment, so we only match using the "name".
-- */
--struct clk {
--	struct list_head	node;
--	unsigned long		rate;
--	const char		*name;
--	unsigned int		enabled;
--	void			(*enable)(void);
--	void			(*disable)(void);
--};
--
--static LIST_HEAD(clocks);
--static DEFINE_MUTEX(clocks_mutex);
--static DEFINE_SPINLOCK(clocks_lock);
--
--struct clk *clk_get(struct device *dev, const char *id)
--{
--	struct clk *p, *clk = ERR_PTR(-ENOENT);
--
--	mutex_lock(&clocks_mutex);
--	list_for_each_entry(p, &clocks, node) {
--		if (strcmp(id, p->name) == 0) {
--			clk = p;
--			break;
--		}
--	}
--	mutex_unlock(&clocks_mutex);
--
--	return clk;
--}
--EXPORT_SYMBOL(clk_get);
--
--void clk_put(struct clk *clk)
--{
--}
--EXPORT_SYMBOL(clk_put);
--
--int clk_enable(struct clk *clk)
--{
--	unsigned long flags;
--
--	spin_lock_irqsave(&clocks_lock, flags);
--	if (clk->enabled++ == 0)
--		clk->enable();
--	spin_unlock_irqrestore(&clocks_lock, flags);
--	return 0;
--}
--EXPORT_SYMBOL(clk_enable);
--
--void clk_disable(struct clk *clk)
--{
--	unsigned long flags;
--
--	WARN_ON(clk->enabled == 0);
--
--	spin_lock_irqsave(&clocks_lock, flags);
--	if (--clk->enabled == 0)
--		clk->disable();
--	spin_unlock_irqrestore(&clocks_lock, flags);
--}
--EXPORT_SYMBOL(clk_disable);
--
--unsigned long clk_get_rate(struct clk *clk)
--{
--	return clk->rate;
--}
--EXPORT_SYMBOL(clk_get_rate);
--
--
--static void clk_gpio27_enable(void)
-+static int clk_gpio27_enable(struct clk *clk)
- {
- 	/*
- 	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
-@@ -93,9 +23,11 @@ static void clk_gpio27_enable(void)
- 	GAFR |= GPIO_32_768kHz;
- 	GPDR |= GPIO_32_768kHz;
- 	TUCR = TUCR_3_6864MHz;
-+
-+	return 0;
- }
- 
--static void clk_gpio27_disable(void)
-+static void clk_gpio27_disable(struct clk *clk)
- {
- 	TUCR = 0;
- 	GPDR &= ~GPIO_32_768kHz;
-@@ -109,23 +41,6 @@ static struct clk clk_gpio27 = {
- 	.disable	= clk_gpio27_disable,
- };
- 
--int clk_register(struct clk *clk)
--{
--	mutex_lock(&clocks_mutex);
--	list_add(&clk->node, &clocks);
--	mutex_unlock(&clocks_mutex);
--	return 0;
--}
--EXPORT_SYMBOL(clk_register);
--
--void clk_unregister(struct clk *clk)
--{
--	mutex_lock(&clocks_mutex);
--	list_del(&clk->node);
--	mutex_unlock(&clocks_mutex);
--}
--EXPORT_SYMBOL(clk_unregister);
--
- static int __init clk_init(void)
- {
- 	clk_register(&clk_gpio27);
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0044-fix-tmio_mmc-debug-compilation.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0044-fix-tmio_mmc-debug-compilation.patch
deleted file mode 100644
index 5ca8228604..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0044-fix-tmio_mmc-debug-compilation.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 03fdebde257197c13c0d10882e16a2a888ab4e0a Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Sat, 2 Feb 2008 20:23:01 +0300
-Subject: [PATCH 44/64] fix tmio_mmc debug compilation
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/mmc/host/tmio_mmc.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
-index 735c386..b0d38e2 100644
---- a/drivers/mmc/host/tmio_mmc.c
-+++ b/drivers/mmc/host/tmio_mmc.c
-@@ -329,7 +329,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
- 	if (!ireg) {
- 		disable_mmc_irqs(ctl, status & ~irq_mask);
- #ifdef CONFIG_MMC_DEBUG
--		WARN("tmio_mmc: Spurious MMC irq, disabling! 0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
-+		printk(KERN_WARNING "tmio_mmc: Spurious MMC irq, disabling! 0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
- 		debug_status(status);
- #endif
- 		goto out;
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0045-Update-tmio_ohci.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0045-Update-tmio_ohci.patch
deleted file mode 100644
index 10f483b89d..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0045-Update-tmio_ohci.patch
+++ /dev/null
@@ -1,416 +0,0 @@
-From fe3c05491370965eb821aedc95f771b86ebab3ab Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:01:44 +0300
-Subject: [PATCH 45/64] Update tmio_ohci:
- Ports management.
- Basic support for ohci suspend/resume.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/mfd/tc6393xb.c       |   40 ++++++++
- drivers/usb/host/ohci-tmio.c |  206 +++++++++++++++++++++++++++++++++++++++---
- 2 files changed, 235 insertions(+), 11 deletions(-)
-
-diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
-index 9439f39..5d17687 100644
---- a/drivers/mfd/tc6393xb.c
-+++ b/drivers/mfd/tc6393xb.c
-@@ -224,6 +224,44 @@ static int tc6393xb_ohci_enable(struct platform_device *ohci)
- 	return 0;
- }
- 
-+static int tc6393xb_ohci_suspend(struct platform_device *ohci)
-+{
-+	struct platform_device		*dev	= to_platform_device(ohci->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.usbcken = 0;
-+	iowrite16(ccr.raw, &scr->ccr);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int tc6393xb_ohci_resume(struct platform_device *ohci)
-+{
-+	struct platform_device		*dev	= to_platform_device(ohci->dev.parent);
-+	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	union tc6393xb_scr_ccr		ccr;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	ccr.raw = ioread16(&scr->ccr);
-+	ccr.bits.usbcken = 1;
-+	iowrite16(ccr.raw, &scr->ccr);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
- static int tc6393xb_fb_disable(struct platform_device *fb)
- {
- 	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
-@@ -423,6 +461,8 @@ static struct mfd_cell tc6393xb_cells[] = {
- 		.name = "tmio-ohci",
- 		.enable = tc6393xb_ohci_enable,
- 		.disable = tc6393xb_ohci_disable,
-+		.suspend = tc6393xb_ohci_suspend,
-+		.resume = tc6393xb_ohci_resume,
- 		.num_resources = ARRAY_SIZE(tc6393xb_ohci_resources),
- 		.resources = tc6393xb_ohci_resources,
- 	},
-diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
-index be609f3..65e3cd3 100644
---- a/drivers/usb/host/ohci-tmio.c
-+++ b/drivers/usb/host/ohci-tmio.c
-@@ -75,10 +75,13 @@ struct tmio_uhccr {
- 	u8 x07[3];
- } __attribute__((packed));
- 
-+#define MAX_TMIO_OHCI_PORTS	3
-+
- #define UHCCR_PM_GKEN      0x0001
- #define UHCCR_PM_CKRNEN    0x0002
- #define UHCCR_PM_USBPW1    0x0004
- #define UHCCR_PM_USBPW2    0x0008
-+#define UHCCR_PM_USBPW3    0x0008
- #define UHCCR_PM_PMEE      0x0100
- #define UHCCR_PM_PMES      0x8000
- 
-@@ -86,44 +89,96 @@ struct tmio_uhccr {
- 
- struct tmio_hcd {
- 	struct tmio_uhccr __iomem *ccr;
-+	spinlock_t		lock; /* protects RMW cycles and disabled_ports data */
-+	bool disabled_ports[MAX_TMIO_OHCI_PORTS];
- };
- 
- #define hcd_to_tmio(hcd)	((struct tmio_hcd *)(hcd_to_ohci(hcd) + 1))
- #define ohci_to_tmio(ohci)	((struct tmio_hcd *)(ohci + 1))
- 
-+struct indexed_device_attribute{
-+	struct device_attribute dev_attr;
-+	int index;
-+};
-+#define to_indexed_dev_attr(_dev_attr) \
-+	container_of(_dev_attr, struct indexed_device_attribute, dev_attr)
-+
-+#define INDEXED_ATTR(_name, _mode, _show, _store, _index)		\
-+	{ .dev_attr = __ATTR(_name ## _index, _mode, _show, _store),	\
-+	  .index = _index }
-+
-+#define INDEXED_DEVICE_ATTR(_name, _mode, _show, _store, _index)	\
-+struct indexed_device_attribute dev_attr_##_name ## _index	\
-+	= INDEXED_ATTR(_name, _mode, _show, _store, _index)
-+
-+static bool disabled_tmio_ports[MAX_TMIO_OHCI_PORTS];
-+module_param_array(disabled_tmio_ports, bool, NULL, 0644);
-+MODULE_PARM_DESC(disabled_tmio_ports,
-+		"disable specified TC6393 usb ports (default: all enabled)");
-+
- /*-------------------------------------------------------------------------*/
- 
-+static void tmio_write_pm(struct platform_device *dev)
-+{
-+	struct usb_hcd			*hcd	= platform_get_drvdata(dev);
-+	struct tmio_hcd			*tmio	= hcd_to_tmio(hcd);
-+	struct tmio_uhccr __iomem	*ccr	= tmio->ccr;
-+	u16				pm;
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tmio->lock, flags);
-+
-+	pm = UHCCR_PM_GKEN | UHCCR_PM_CKRNEN |
-+	     UHCCR_PM_PMEE | UHCCR_PM_PMES;
-+
-+	if (tmio->disabled_ports[0])
-+		pm |= UHCCR_PM_USBPW1;
-+	if (tmio->disabled_ports[1])
-+		pm |= UHCCR_PM_USBPW2;
-+	if (tmio->disabled_ports[2])
-+		pm |= UHCCR_PM_USBPW3;
-+
-+	iowrite16(pm,		&ccr->pm);
-+	spin_unlock_irqrestore(&tmio->lock, flags);
-+}
-+
- static void tmio_stop_hc(struct platform_device *dev)
- {
- 	struct mfd_cell			*cell	= mfd_get_cell(dev);
- 	struct usb_hcd			*hcd	= platform_get_drvdata(dev);
-+	struct ohci_hcd			*ohci	= hcd_to_ohci(hcd);
- 	struct tmio_hcd			*tmio	= hcd_to_tmio(hcd);
- 	struct tmio_uhccr __iomem	*ccr	= tmio->ccr;
- 	u16				pm;
- 
--	pm = UHCCR_PM_GKEN | UHCCR_PM_CKRNEN | UHCCR_PM_USBPW1 | UHCCR_PM_USBPW2;
-+	pm = UHCCR_PM_GKEN | UHCCR_PM_CKRNEN;
-+	switch (ohci->num_ports) {
-+		default:
-+			dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports);
-+		case 3:
-+			pm |= UHCCR_PM_USBPW3;
-+		case 2:
-+			pm |= UHCCR_PM_USBPW2;
-+		case 1:
-+			pm |= UHCCR_PM_USBPW1;
-+	}
- 	iowrite8(0,		&ccr->intc);
- 	iowrite8(0,		&ccr->ilme);
- 	iowrite16(0,		&ccr->basel);
- 	iowrite16(0,		&ccr->baseh);
--	iowrite16(pm,	&ccr->pm);
-+	iowrite16(pm,		&ccr->pm);
- 
- 	cell->disable(dev);
- }
- 
- static void tmio_start_hc(struct platform_device *dev)
- {
--	struct mfd_cell			*cell	= mfd_get_cell(dev);
- 	struct usb_hcd			*hcd	= platform_get_drvdata(dev);
- 	struct tmio_hcd			*tmio	= hcd_to_tmio(hcd);
- 	struct tmio_uhccr __iomem	*ccr	= tmio->ccr;
--	u16				pm;
- 	unsigned long			base	= hcd->rsrc_start;
- 
--	pm = UHCCR_PM_CKRNEN | UHCCR_PM_GKEN | UHCCR_PM_PMEE | UHCCR_PM_PMES;
--	cell->enable(dev);
--
--	iowrite16(pm,	&ccr->pm);
-+	tmio_write_pm(dev);
- 	iowrite16(base,		&ccr->basel);
- 	iowrite16(base >> 16,	&ccr->baseh);
- 	iowrite8(1,		&ccr->ilme);
-@@ -133,9 +188,56 @@ static void tmio_start_hc(struct platform_device *dev)
- 			ioread8(&ccr->revid), hcd->rsrc_start, hcd->irq);
- }
- 
-+static ssize_t tmio_disabled_port_show(struct device *dev,
-+		struct device_attribute *attr,
-+		char *buf)
-+{
-+	struct usb_hcd		*hcd	= dev_get_drvdata(dev);
-+	struct tmio_hcd		*tmio	= hcd_to_tmio(hcd);
-+	int			index	= to_indexed_dev_attr(attr)->index;
-+	return snprintf(buf, PAGE_SIZE, "%c",
-+			tmio->disabled_ports[index-1]? 'Y': 'N');
-+}
-+
-+static ssize_t tmio_disabled_port_store(struct device *dev,
-+		struct device_attribute *attr,
-+		const char *buf, size_t count)
-+{
-+	struct usb_hcd		*hcd	= dev_get_drvdata(dev);
-+	struct tmio_hcd		*tmio	= hcd_to_tmio(hcd);
-+	int			index	= to_indexed_dev_attr(attr)->index;
-+
-+	if (!count)
-+		return -EINVAL;
-+
-+	switch (buf[0]) {
-+	case 'y': case 'Y': case '1':
-+		tmio->disabled_ports[index-1] = true;
-+		break;
-+	case 'n': case 'N': case '0':
-+		tmio->disabled_ports[index-1] = false;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	tmio_write_pm(to_platform_device(dev));
-+
-+	return 1;
-+}
-+
-+
-+static INDEXED_DEVICE_ATTR(disabled_usb_port, S_IRUGO | S_IWUSR,
-+		tmio_disabled_port_show, tmio_disabled_port_store, 1);
-+static INDEXED_DEVICE_ATTR(disabled_usb_port, S_IRUGO | S_IWUSR,
-+		tmio_disabled_port_show, tmio_disabled_port_store, 2);
-+static INDEXED_DEVICE_ATTR(disabled_usb_port, S_IRUGO | S_IWUSR,
-+		tmio_disabled_port_show, tmio_disabled_port_store, 3);
-+
- static int usb_hcd_tmio_probe(const struct hc_driver *driver,
- 		struct platform_device *dev)
- {
-+	struct mfd_cell		*cell	= mfd_get_cell(dev);
- 	struct resource		*config	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_CONFIG);
- 	struct resource		*regs	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_CONTROL);
- 	struct resource		*sram	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM);
-@@ -159,6 +261,12 @@ static int usb_hcd_tmio_probe(const struct hc_driver *driver,
- 
- 	tmio		= hcd_to_tmio(hcd);
- 
-+	spin_lock_init(&tmio->lock);
-+
-+	memcpy(tmio->disabled_ports,
-+			disabled_tmio_ports,
-+			sizeof(disabled_tmio_ports));
-+
- 	tmio->ccr = ioremap(config->start, config->end - config->start + 1);
- 	if (!tmio->ccr) {
- 		retval = -ENOMEM;
-@@ -183,17 +291,46 @@ static int usb_hcd_tmio_probe(const struct hc_driver *driver,
- 	if (retval)
- 		goto err_dmabounce_register_dev;
- 
-+	retval = cell->enable(dev);
-+	if (retval)
-+		goto err_enable;
-+
- 	tmio_start_hc(dev);
- 	ohci = hcd_to_ohci(hcd);
- 	ohci_hcd_init(ohci);
- 
- 	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+	if (retval)
-+		goto err_add_hcd;
-+
-+	switch (ohci->num_ports) {
-+		default:
-+			dev_err(&dev->dev, "Unsupported amount of ports: %d\n",
-+					ohci->num_ports);
-+		case 3:
-+			retval |= device_create_file(&dev->dev,
-+					&dev_attr_disabled_usb_port3.dev_attr);
-+		case 2:
-+			retval |= device_create_file(&dev->dev,
-+					&dev_attr_disabled_usb_port2.dev_attr);
-+		case 1:
-+			retval |= device_create_file(&dev->dev,
-+					&dev_attr_disabled_usb_port1.dev_attr);
-+	}
- 
- 	if (retval == 0)
- 		return retval;
- 
--	tmio_stop_hc(dev);
-+	device_remove_file(&dev->dev, &dev_attr_disabled_usb_port3.dev_attr);
-+	device_remove_file(&dev->dev, &dev_attr_disabled_usb_port2.dev_attr);
-+	device_remove_file(&dev->dev, &dev_attr_disabled_usb_port1.dev_attr);
-+
-+	usb_remove_hcd(hcd);
- 
-+err_add_hcd:
-+	tmio_stop_hc(dev);
-+	cell->disable(dev);
-+err_enable:
- 	dmabounce_unregister_dev(&dev->dev);
- err_dmabounce_register_dev:
- 	dma_release_declared_memory(&dev->dev);
-@@ -212,6 +349,9 @@ static void usb_hcd_tmio_remove(struct usb_hcd *hcd, struct platform_device *dev
- {
- 	struct tmio_hcd		*tmio	= hcd_to_tmio(hcd);
- 
-+	device_remove_file(&dev->dev, &dev_attr_disabled_usb_port3.dev_attr);
-+	device_remove_file(&dev->dev, &dev_attr_disabled_usb_port2.dev_attr);
-+	device_remove_file(&dev->dev, &dev_attr_disabled_usb_port1.dev_attr);
- 	usb_remove_hcd(hcd);
- 	tmio_stop_hc(dev);
- 	dmabounce_unregister_dev(&dev->dev);
-@@ -297,13 +437,22 @@ static u64 dma_mask = DMA_32BIT_MASK;
- static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
- {
- 	struct resource		*sram	= platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM);
-+	int retval;
- 
- 	dev->dev.dma_mask = &dma_mask;
- 	dev->dev.coherent_dma_mask = DMA_32BIT_MASK;
- 
-+	/* FIXME: move dmabounce checkers to tc6393xb core? */
- 	dmabounce_register_checker(tmio_dmabounce_check, sram);
- 
--	return usb_hcd_tmio_probe(&ohci_tmio_hc_driver, dev);
-+	retval = usb_hcd_tmio_probe(&ohci_tmio_hc_driver, dev);
-+
-+	if (retval == 0)
-+		return retval;
-+
-+	dmabounce_remove_checker(tmio_dmabounce_check, sram);
-+
-+	return retval;
- }
- 
- static int ohci_hcd_tmio_drv_remove(struct platform_device *dev)
-@@ -323,14 +472,31 @@ static int ohci_hcd_tmio_drv_remove(struct platform_device *dev)
- #ifdef	CONFIG_PM
- static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state)
- {
-+	struct mfd_cell		*cell	= mfd_get_cell(dev);
- 	struct usb_hcd		*hcd	= platform_get_drvdata(dev);
- 	struct ohci_hcd		*ohci	= hcd_to_ohci(hcd);
-+	struct tmio_hcd		*tmio	= hcd_to_tmio(hcd);
-+	struct tmio_uhccr __iomem *ccr	= tmio->ccr;
-+	unsigned long		flags;
-+	u8			misc;
-+	int			ret;
- 
- 	if (time_before(jiffies, ohci->next_statechange))
- 		msleep(5);
- 	ohci->next_statechange = jiffies;
- 
--	tmio_stop_hc(dev);
-+	spin_lock_irqsave(&tmio->lock, flags);
-+
-+	misc = ioread8(&ccr->misc);
-+	misc |= 1 << 3; /* USSUSP */
-+	iowrite8(misc, &ccr->misc);
-+
-+	spin_unlock_irqrestore(&tmio->lock, flags);
-+
-+	ret = cell->suspend(dev);
-+	if (ret)
-+		return ret;
-+
- 	hcd->state = HC_STATE_SUSPENDED;
- 	dev->dev.power.power_state = PMSG_SUSPEND;
- 
-@@ -339,15 +505,33 @@ static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t s
- 
- static int ohci_hcd_tmio_drv_resume(struct platform_device *dev)
- {
-+	struct mfd_cell		*cell	= mfd_get_cell(dev);
- 	struct usb_hcd		*hcd	= platform_get_drvdata(dev);
- 	struct ohci_hcd		*ohci	= hcd_to_ohci(hcd);
-+	struct tmio_hcd		*tmio	= hcd_to_tmio(hcd);
-+	struct tmio_uhccr __iomem *ccr	= tmio->ccr;
-+	unsigned long		flags;
-+	u8			misc;
-+	int			ret;
- 
- 	if (time_before(jiffies, ohci->next_statechange))
- 		msleep(5);
- 	ohci->next_statechange = jiffies;
- 
-+	ret = cell->resume(dev);
-+	if (ret)
-+		return ret;
-+
- 	tmio_start_hc(dev);
- 
-+	spin_lock_irqsave(&tmio->lock, flags);
-+
-+	misc = ioread8(&ccr->misc);
-+	misc &= ~(1 << 3); /* USSUSP */
-+	iowrite8(misc, &ccr->misc);
-+
-+	spin_unlock_irqrestore(&tmio->lock, flags);
-+
- 	dev->dev.power.power_state = PMSG_ON;
- 	usb_hcd_resume_root_hub(hcd);
- 
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0046-patch-tc6393xb-cleanup.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0046-patch-tc6393xb-cleanup.patch
deleted file mode 100644
index c4b57cb2d1..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0046-patch-tc6393xb-cleanup.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From edaab7ec86235871d8ad219a1d225ce12f67f8af Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:13:29 +0300
-Subject: [PATCH 46/64] patch tc6393xb-cleanup
-
----
- drivers/mfd/tc6393xb.c |   20 ++++++++++++--------
- 1 files changed, 12 insertions(+), 8 deletions(-)
-
-diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
-index 5d17687..dfae61d 100644
---- a/drivers/mfd/tc6393xb.c
-+++ b/drivers/mfd/tc6393xb.c
-@@ -590,16 +590,8 @@ static int tc6393xb_hw_init(struct platform_device *dev, int resume)
- 	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	int				ret;
- 	int				i;
- 
--	if (resume)
--		ret = tcpd->resume(dev);
--	else
--		ret = tcpd->enable(dev);
--	if (ret)
--		return ret;
--
- 	iowrite8(resume ?
- 		tc6393xb->suspend_state.fer.raw :
- 		0,				&scr->fer);
-@@ -664,6 +656,10 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
- 		goto err_ioremap;
- 	}
- 
-+	retval = tcpd->enable(dev);
-+	if (retval)
-+		goto err_enable;
-+
- 	retval = tc6393xb_hw_init(dev, 0);
- 	if (retval)
- 		goto err_hw_init;
-@@ -690,6 +686,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
- 		tc6393xb_detach_irq(dev);
- 
- err_hw_init:
-+	tcpd->disable(dev);
-+err_enable:
- 	iounmap(tc6393xb->scr);
- err_ioremap:
- 	release_resource(rscr);
-@@ -743,6 +741,12 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
- 
- static int tc6393xb_resume(struct platform_device *dev)
- {
-+	struct tc6393xb_platform_data	*tcpd	= dev->dev.platform_data;
-+	int ret = tcpd->resume(dev);
-+
-+	if (ret)
-+		return ret;
-+
- 	return tc6393xb_hw_init(dev, 1);
- }
- #else
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0047-tc6393xb-use-bitmasks-instead-of-bit-field-structs.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0047-tc6393xb-use-bitmasks-instead-of-bit-field-structs.patch
deleted file mode 100644
index 54e88253d1..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0047-tc6393xb-use-bitmasks-instead-of-bit-field-structs.patch
+++ /dev/null
@@ -1,412 +0,0 @@
-From c18b8e34c39ec0d395988318e6651076a748d6bd Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Tue, 12 Feb 2008 04:40:54 +0300
-Subject: [PATCH 47/64] tc6393xb: use bitmasks instead of bit-field structs
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/mfd/tc6393xb.c       |  162 ++++++++++++++++++++++++-----------------
- include/linux/mfd/tc6393xb.h |   63 +++-------------
- 2 files changed, 107 insertions(+), 118 deletions(-)
-
-diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
-index dfae61d..1a394e4 100644
---- a/drivers/mfd/tc6393xb.c
-+++ b/drivers/mfd/tc6393xb.c
-@@ -24,6 +24,31 @@
- #include <linux/mfd/tmio.h>
- #include <linux/mfd/tc6393xb.h>
- 
-+#define TC6393XB_FER_USBEN		BIT(0)	/* USB host enable */
-+#define TC6393XB_FER_LCDCVEN		BIT(1)	/* polysilicon TFT enable */
-+#define TC6393XB_FER_SLCDEN		BIT(2)	/* SLCD enable */
-+
-+enum pincontrol {
-+	opendrain	= 0,
-+	tristate	= 1,
-+	pushpull	= 2,
-+	/* reserved	= 3, */
-+};
-+
-+#define TC6393XB_MCR_RDY_MASK		(3 << 0)
-+#define TC6393XB_MCR_RDY_OPENDRAIN	(0 << 0)
-+#define TC6393XB_MCR_RDY_TRISTATE	(1 << 0)
-+#define TC6393XB_MCR_RDY_PUSHPULL	(2 << 0)
-+#define TC6393XB_MCR_RDY_UNK		BIT(2)
-+#define TC6393XB_MCR_RDY_EN		BIT(3)
-+#define TC6393XB_MCR_INT_MASK		(3 << 4)
-+#define TC6393XB_MCR_INT_OPENDRAIN	(0 << 4)
-+#define TC6393XB_MCR_INT_TRISTATE	(1 << 4)
-+#define TC6393XB_MCR_INT_PUSHPULL	(2 << 4)
-+#define TC6393XB_MCR_INT_UNK		BIT(6)
-+#define TC6393XB_MCR_INT_EN		BIT(7)
-+/* bits 8 - 16 are unknown */
-+
- struct tc6393xb_scr {
- 	u8 x00[8];
- 	u8	revid;		/* 0x08 Revision ID			*/
-@@ -74,8 +99,8 @@ struct tc6393xb {
- 	spinlock_t			lock; /* protects RMW cycles */
- 
- 	struct {
--		union tc6393xb_scr_fer	fer;
--		union tc6393xb_scr_ccr	ccr;
-+		u8			fer;
-+		u16			ccr;
- 		u8			gpi_bcr[4];
- 	} suspend_state;
- 
-@@ -90,13 +115,13 @@ static int tc6393xb_mmc_enable(struct platform_device *mmc) {
- 	struct platform_device		*dev	= to_platform_device(mmc->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr = tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
-+	u16				ccr;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.ck32ken = 1;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr |= TC6393XB_CCR_CK32K;
-+	iowrite16(ccr, &scr->ccr);
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
- 	return 0;
-@@ -106,13 +131,13 @@ static int tc6393xb_mmc_disable(struct platform_device *mmc) {
- 	struct platform_device		*dev	= to_platform_device(mmc->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
-+	u16				ccr;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.ck32ken = 0;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr &= ~TC6393XB_CCR_CK32K;
-+	iowrite16(ccr, &scr->ccr);
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
- 	return 0;
-@@ -148,14 +173,17 @@ int tc6393xb_lcd_set_power(struct platform_device *fb, bool on)
- 	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_fer		fer;
-+	u8				fer;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
- 
--	fer.raw	= ioread8(&scr->fer);
--	fer.bits.slcden = on ? 1 : 0;
--	iowrite8(fer.raw, &scr->fer);
-+	fer = ioread8(&scr->fer);
-+	if (on)
-+		fer |= TC6393XB_FER_SLCDEN;
-+	else
-+		fer &= ~TC6393XB_FER_SLCDEN;
-+	iowrite8(fer, &scr->fer);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -181,19 +209,19 @@ static int tc6393xb_ohci_disable(struct platform_device *ohci)
- 	struct platform_device		*dev	= to_platform_device(ohci->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
--	union tc6393xb_scr_fer		fer;
-+	u16				ccr;
-+	u8				fer;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
- 
--	fer.raw = ioread8(&scr->fer);
--	fer.bits.usben = 0;
--	iowrite8(fer.raw, &scr->fer);
-+	fer = ioread8(&scr->fer);
-+	fer &= ~TC6393XB_FER_USBEN;
-+	iowrite8(fer, &scr->fer);
- 
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.usbcken = 0;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr &= ~TC6393XB_CCR_USBCK;
-+	iowrite16(ccr, &scr->ccr);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -205,19 +233,19 @@ static int tc6393xb_ohci_enable(struct platform_device *ohci)
- 	struct platform_device		*dev	= to_platform_device(ohci->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
--	union tc6393xb_scr_fer		fer;
-+	u16				ccr;
-+	u8				fer;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
- 
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.usbcken = 1;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr |= TC6393XB_CCR_USBCK;
-+	iowrite16(ccr, &scr->ccr);
- 
--	fer.raw = ioread8(&scr->fer);
--	fer.bits.usben = 1;
--	iowrite8(fer.raw, &scr->fer);
-+	fer = ioread8(&scr->fer);
-+	fer |= TC6393XB_FER_USBEN;
-+	iowrite8(fer, &scr->fer);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -229,14 +257,14 @@ static int tc6393xb_ohci_suspend(struct platform_device *ohci)
- 	struct platform_device		*dev	= to_platform_device(ohci->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
-+	u16				ccr;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
- 
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.usbcken = 0;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr &= ~TC6393XB_CCR_USBCK;
-+	iowrite16(ccr, &scr->ccr);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -248,14 +276,14 @@ static int tc6393xb_ohci_resume(struct platform_device *ohci)
- 	struct platform_device		*dev	= to_platform_device(ohci->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
-+	u16				ccr;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
- 
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.usbcken = 1;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr |= TC6393XB_CCR_USBCK;
-+	iowrite16(ccr, &scr->ccr);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -267,8 +295,8 @@ static int tc6393xb_fb_disable(struct platform_device *fb)
- 	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
--	union tc6393xb_scr_fer		fer;
-+	u16				ccr;
-+	u8				fer;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
-@@ -276,14 +304,13 @@ static int tc6393xb_fb_disable(struct platform_device *fb)
- 	/*
- 	 * FIXME: is this correct or it should be moved to other _disable?
- 	 */
--	fer.raw	= ioread8(&scr->fer);
--	fer.bits.slcden = 0;
--/*	fer.bits.lcdcven = 0; */
--	iowrite8(fer.raw, &scr->fer);
-+	fer = ioread8(&scr->fer);
-+	fer &= ~TC6393XB_FER_SLCDEN;
-+	iowrite8(fer, &scr->fer);
- 
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.mclksel = disable;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr = (ccr & ~TC6393XB_CCR_MCLK_MASK) | TC6393XB_CCR_MCLK_OFF;
-+	iowrite16(ccr, &scr->ccr);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -295,14 +322,14 @@ static int tc6393xb_fb_enable(struct platform_device *fb)
- 	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
-+	u16				ccr;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
- 
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.mclksel = m48MHz;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr = (ccr & ~TC6393XB_CCR_MCLK_MASK) | TC6393XB_CCR_MCLK_48;
-+	iowrite16(ccr, &scr->ccr);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -314,14 +341,14 @@ static int tc6393xb_fb_suspend(struct platform_device *fb)
- 	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
-+	u16				ccr;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
- 
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.mclksel = disable;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr = (ccr & ~TC6393XB_CCR_MCLK_MASK) | TC6393XB_CCR_MCLK_OFF;
-+	iowrite16(ccr, &scr->ccr);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -333,14 +360,14 @@ static int tc6393xb_fb_resume(struct platform_device *fb)
- 	struct platform_device		*dev	= to_platform_device(fb->dev.parent);
- 	struct tc6393xb			*tc6393xb = platform_get_drvdata(dev);
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
--	union tc6393xb_scr_ccr		ccr;
-+	u16				ccr;
- 	unsigned long			flags;
- 
- 	spin_lock_irqsave(&tc6393xb->lock, flags);
- 
--	ccr.raw = ioread16(&scr->ccr);
--	ccr.bits.mclksel = m48MHz;
--	iowrite16(ccr.raw, &scr->ccr);
-+	ccr = ioread16(&scr->ccr);
-+	ccr = (ccr & ~TC6393XB_CCR_MCLK_MASK) | TC6393XB_CCR_MCLK_48;
-+	iowrite16(ccr, &scr->ccr);
- 
- 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
- 
-@@ -592,14 +619,15 @@ static int tc6393xb_hw_init(struct platform_device *dev, int resume)
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
- 	int				i;
- 
--	iowrite8(resume ?
--		tc6393xb->suspend_state.fer.raw :
--		0,				&scr->fer);
-+	iowrite8(resume ? tc6393xb->suspend_state.fer : 0,
-+						&scr->fer);
- 	iowrite16(tcpd->scr_pll2cr,		&scr->pll2cr);
- 	iowrite16(resume?
--		tc6393xb->suspend_state.ccr.raw :
--		tcpd->scr_ccr.raw,		&scr->ccr);
--	iowrite16(tcpd->scr_mcr.raw,		&scr->mcr);
-+		tc6393xb->suspend_state.ccr :
-+		tcpd->scr_ccr,		&scr->ccr);
-+	iowrite16(TC6393XB_MCR_RDY_OPENDRAIN | TC6393XB_MCR_RDY_UNK | TC6393XB_MCR_RDY_EN |
-+		  TC6393XB_MCR_INT_OPENDRAIN | TC6393XB_MCR_INT_UNK | TC6393XB_MCR_INT_EN |
-+		  BIT(15),		&scr->mcr);
- 	iowrite16(tcpd->scr_gper,		&scr->gper);
- 	iowrite8(0,				&scr->irr);
- 	iowrite8(0xbf,				&scr->imr);
-@@ -730,8 +758,8 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
- 	int i;
- 
- 
--	tc6393xb->suspend_state.ccr.raw		= ioread16(&scr->ccr);
--	tc6393xb->suspend_state.fer.raw		= ioread8(&scr->fer);
-+	tc6393xb->suspend_state.ccr		= ioread16(&scr->ccr);
-+	tc6393xb->suspend_state.fer		= ioread8(&scr->fer);
- 	for (i = 0; i < 4; i++)
- 		tc6393xb->suspend_state.gpi_bcr[i] =
- 			ioread8(scr->gpi_bcr + i);
-diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
-index e699294..2c69f63 100644
---- a/include/linux/mfd/tc6393xb.h
-+++ b/include/linux/mfd/tc6393xb.h
-@@ -20,60 +20,21 @@
- #include <linux/mfd-core.h>
- #include <linux/mfd/tmio.h>
- 
--union tc6393xb_scr_fer {
--	u8		raw;
--struct {
--	unsigned	usben:1;	/* D0	USB enable		*/
--	unsigned	lcdcven:1;	/* D1	polysylicon TFT enable	*/
--	unsigned	slcden:1;	/* D2	SLCD enable		*/
--} __attribute__ ((packed)) bits;
--} __attribute__ ((packed));
--
--union tc6393xb_scr_ccr {
--	u16		raw;
--struct {
--	unsigned	ck32ken:1;	/* D0	SD host clock enable	*/
--	unsigned	usbcken:1;	/* D1	USB host clock enable	*/
--	unsigned	x00:2;
--	unsigned	sharp:1;	/* D4	??? set in Sharp's code	*/
--	unsigned	x01:3;
--	enum {				disable	= 0,
--					m12MHz	= 1,
--					m24MHz	= 2,
--					m48MHz	= 3,
--	}		mclksel:3;	/* D10-D8  LCD controller clock	*/
--	unsigned	x02:1;
--	enum {				h24MHz	= 0,
--					h48MHz	= 1,
--	}		hclksel:2;	/* D13-D12 host bus clock	*/
--	unsigned	x03:2;
--} __attribute__ ((packed)) bits;
--} __attribute__ ((packed));
--
--enum pincontrol {
--	opendrain	= 0,
--	tristate	= 1,
--	pushpull	= 2,
--	/* reserved	= 3, */
--};
--
--union tc6393xb_scr_mcr {
--	u16		raw;
--struct {
--	enum pincontrol	rdyst:2;	/* D1-D0   HRDY control		*/
--	unsigned	x00:1;
--	unsigned	aren:1;		/* D3	   HRDY pull up resistance cut off */
--	enum pincontrol	intst:2;	/* D5-D4   #HINT control	*/
--	unsigned	x01:1;
--	unsigned	aien:1;		/* D7      #HINT pull up resitance cut off */
--	unsigned	x02:8;
--} __attribute__ ((packed)) bits;
--} __attribute__ ((packed));
-+#define TC6393XB_CCR_CK32K	BIT(0)
-+#define TC6393XB_CCR_USBCK	BIT(1)
-+#define TC6393XB_CCR_UNK1	BIT(4)
-+#define TC6393XB_CCR_MCLK_MASK	(7 << 8)
-+#define TC6393XB_CCR_MCLK_OFF	(0 << 8)
-+#define TC6393XB_CCR_MCLK_12	(1 << 8)
-+#define TC6393XB_CCR_MCLK_24	(2 << 8)
-+#define TC6393XB_CCR_MCLK_48	(3 << 8)
-+#define TC6393XB_CCR_HCLK_MASK	(3 << 12)
-+#define TC6393XB_CCR_HCLK_24	(0 << 12)
-+#define TC6393XB_CCR_HCLK_48	(1 << 12)
- 
- struct tc6393xb_platform_data {
- 	u16	scr_pll2cr;	/* PLL2 Control */
--	union tc6393xb_scr_ccr	scr_ccr;	/* Clock Control */
--	union tc6393xb_scr_mcr	scr_mcr;	/* Mode Control */
-+	u16	scr_ccr;	/* Clock Control */
- 	u16	scr_gper;	/* GP Enable */
- 	u32	scr_gpo_doecr;	/* GPO Data OE Control */
- 	u32	scr_gpo_dsr;	/* GPO Data Set */
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0048-tc6393xb-GPIO-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0048-tc6393xb-GPIO-support.patch
deleted file mode 100644
index ef47d6cc21..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0048-tc6393xb-GPIO-support.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From 4fb4d83c7090ea21619bb652f2ea9b5c8c0c453e Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 01:42:58 +0300
-Subject: [PATCH 48/64] tc6393xb GPIO support
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/mfd/tc6393xb.c       |  124 ++++++++++++++++++++++++++++++++++++++++--
- include/linux/mfd/tc6393xb.h |    2 +-
- 2 files changed, 119 insertions(+), 7 deletions(-)
-
-diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
-index 1a394e4..9001687 100644
---- a/drivers/mfd/tc6393xb.c
-+++ b/drivers/mfd/tc6393xb.c
-@@ -49,6 +49,8 @@ enum pincontrol {
- #define TC6393XB_MCR_INT_EN		BIT(7)
- /* bits 8 - 16 are unknown */
- 
-+#include <asm/gpio.h>
-+
- struct tc6393xb_scr {
- 	u8 x00[8];
- 	u8	revid;		/* 0x08 Revision ID			*/
-@@ -96,6 +98,8 @@ struct tc6393xb_scr {
- struct tc6393xb {
- 	struct tc6393xb_scr __iomem	*scr;
- 
-+	struct gpio_chip		gpio;
-+
- 	spinlock_t			lock; /* protects RMW cycles */
- 
- 	struct {
-@@ -513,6 +517,96 @@ static struct mfd_cell tc6393xb_cells[] = {
- 
- /*--------------------------------------------------------------------------*/
- 
-+static int tc6393xb_gpio_get(struct gpio_chip *chip,
-+		unsigned offset)
-+{
-+	struct tc6393xb			*tc6393xb = container_of(chip,
-+						struct tc6393xb, gpio);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	u32				 mask	= 1 << offset;
-+
-+	return tmio_ioread32(scr->gpo_dsr) & mask;
-+}
-+
-+static void __tc6393xb_gpio_set(struct gpio_chip *chip,
-+		unsigned offset, int value)
-+{
-+	struct tc6393xb			*tc6393xb = container_of(chip,
-+						struct tc6393xb, gpio);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	u32				dsr;
-+
-+	dsr = tmio_ioread32(scr->gpo_dsr);
-+	if (value)
-+		dsr |= (1L << offset);
-+	else
-+		dsr &= ~(1L << offset);
-+
-+	tmio_iowrite32(dsr, scr->gpo_dsr);
-+}
-+
-+static void tc6393xb_gpio_set(struct gpio_chip *chip,
-+		unsigned offset, int value)
-+{
-+	struct tc6393xb			*tc6393xb = container_of(chip,
-+						struct tc6393xb, gpio);
-+	unsigned long			flags;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	__tc6393xb_gpio_set(chip, offset, value);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+}
-+
-+static int tc6393xb_gpio_direction_input(struct gpio_chip *chip,
-+			unsigned offset)
-+{
-+	struct tc6393xb			*tc6393xb = container_of(chip,
-+						struct tc6393xb, gpio);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	unsigned long			flags;
-+	u32				doecr;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	doecr = tmio_ioread32(scr->gpo_doecr);
-+
-+	doecr &= ~(1 << offset);
-+
-+	tmio_iowrite32(doecr, scr->gpo_doecr);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int tc6393xb_gpio_direction_output(struct gpio_chip *chip,
-+			unsigned offset, int value)
-+{
-+	struct tc6393xb			*tc6393xb = container_of(chip,
-+						struct tc6393xb, gpio);
-+	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-+	unsigned long			flags;
-+	u32				doecr;
-+
-+	spin_lock_irqsave(&tc6393xb->lock, flags);
-+
-+	doecr = tmio_ioread32(scr->gpo_doecr);
-+
-+	doecr |= (1 << offset);
-+
-+	tmio_iowrite32(doecr, scr->gpo_doecr);
-+
-+	__tc6393xb_gpio_set(chip, offset, value);
-+
-+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
-+
-+	return 0;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
- static void
- tc6393xb_irq(unsigned int irq, struct irq_desc *desc)
- {
-@@ -631,10 +725,8 @@ static int tc6393xb_hw_init(struct platform_device *dev, int resume)
- 	iowrite16(tcpd->scr_gper,		&scr->gper);
- 	iowrite8(0,				&scr->irr);
- 	iowrite8(0xbf,				&scr->imr);
--	iowrite16(tcpd->scr_gpo_dsr,		scr->gpo_dsr + 0);
--	iowrite16(tcpd->scr_gpo_dsr >> 16,	scr->gpo_dsr + 1);
--	iowrite16(tcpd->scr_gpo_doecr,		scr->gpo_doecr + 0);
--	iowrite16(tcpd->scr_gpo_doecr >> 16,	scr->gpo_doecr + 1);
-+	tmio_iowrite32(tcpd->scr_gpo_dsr,	&scr->gpo_dsr);
-+	tmio_iowrite32(tcpd->scr_gpo_doecr,	&scr->gpo_doecr);
- 
- 	if (resume)
- 		for (i = 0; i < 4; i++)
-@@ -650,7 +742,7 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
- 	struct tc6393xb		*tc6393xb;
- 	struct resource		*iomem;
- 	struct resource		*rscr;
--	int			retval;
-+	int			retval, temp;
- 
- 	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
- 	if (!iomem)
-@@ -696,6 +788,18 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
- 			ioread8(&tc6393xb->scr->revid),
- 			(unsigned long) iomem->start, tc6393xb->irq);
- 
-+	tc6393xb->gpio.label = "tc6393xb";
-+	tc6393xb->gpio.base = tcpd->gpio_base;
-+	tc6393xb->gpio.ngpio = 16; /* FIXME: actually 32, but I'm not sure */
-+	tc6393xb->gpio.set = tc6393xb_gpio_set;
-+	tc6393xb->gpio.get = tc6393xb_gpio_get;
-+	tc6393xb->gpio.direction_input = tc6393xb_gpio_direction_input;
-+	tc6393xb->gpio.direction_output = tc6393xb_gpio_direction_output;
-+
-+	retval = gpiochip_add(&tc6393xb->gpio);
-+	if (retval)
-+		goto err_gpio_add;
-+
- 	if (tc6393xb->irq)
- 		tc6393xb_attach_irq(dev);
- 
-@@ -713,6 +817,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
- 	if (tc6393xb->irq)
- 		tc6393xb_detach_irq(dev);
- 
-+err_gpio_add:
-+	temp = gpiochip_remove(&tc6393xb->gpio);
- err_hw_init:
- 	tcpd->disable(dev);
- err_enable:
-@@ -734,6 +840,12 @@ static int __devexit tc6393xb_remove(struct platform_device *dev) {
- 	if (tc6393xb->irq)
- 		tc6393xb_detach_irq(dev);
- 
-+	ret = gpiochip_remove(&tc6393xb->gpio);
-+	if (ret) {
-+		dev_err(&dev->dev, "Can't remove gpio chip: %d\n", ret);
-+		return ret;
-+	}
-+
- 	ret = tcpd->disable(dev);
- 
- 	iounmap(tc6393xb->scr);
-@@ -804,7 +916,7 @@ static void __exit tc6393xb_exit(void)
- 	platform_driver_unregister(&tc6393xb_driver);
- }
- 
--module_init(tc6393xb_init);
-+subsys_initcall(tc6393xb_init);
- module_exit(tc6393xb_exit);
- 
- MODULE_LICENSE("GPL");
-diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
-index 2c69f63..97c4c7c 100644
---- a/include/linux/mfd/tc6393xb.h
-+++ b/include/linux/mfd/tc6393xb.h
-@@ -45,6 +45,7 @@ struct tc6393xb_platform_data {
- 	int	(*resume)(struct platform_device *dev);
- 
- 	int	irq_base;	/* a base for cascaded irq */
-+	int	gpio_base;
- 
- 	struct tmio_nand_data	*nand_data;
- 	struct tmio_fb_data	*fb_data;
-@@ -54,7 +55,6 @@ extern int tc6393xb_lcd_set_power(struct platform_device *fb_dev, bool on);
- extern int tc6393xb_lcd_mode(struct platform_device *fb_dev,
- 					struct fb_videomode *mode);
- 
--
- /*
-  * Relative to irq_base
-  */
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0049-platform-support-for-TMIO-on-tosa.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0049-platform-support-for-TMIO-on-tosa.patch
deleted file mode 100644
index ff1186cb71..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0049-platform-support-for-TMIO-on-tosa.patch
+++ /dev/null
@@ -1,373 +0,0 @@
-From 30588bdd5c5cdd9fbe269643f582862a76f09efb Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Tue, 12 Feb 2008 04:52:48 +0300
-Subject: [PATCH 49/64] platform support for TMIO on tosa
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/tosa.c        |  179 ++++++++++++++++++++++++++++++++++++++-
- include/asm-arm/arch-pxa/irqs.h |    1 +
- include/asm-arm/arch-pxa/tosa.h |   45 ++++++++--
- sound/soc/pxa/tosa.c            |    3 +-
- 4 files changed, 216 insertions(+), 12 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index 5268e94..e2eec0f 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -18,7 +18,13 @@
- #include <linux/major.h>
- #include <linux/fs.h>
- #include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/fb.h>
- #include <linux/mmc/host.h>
-+#include <linux/mfd/tc6393xb.h>
-+#include <linux/mfd/tmio.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
- #include <linux/pm.h>
- #include <linux/delay.h>
- #include <linux/gpio_keys.h>
-@@ -298,12 +304,183 @@ static struct platform_device tosaled_device = {
-     .id     = -1,
- };
- 
-+/*
-+ * Toshiba Mobile IO Controller
-+ */
-+static struct resource tc6393xb_resources[] = {
-+	[0] = {
-+		.start	= TOSA_LCDC_PHYS,
-+		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+
-+	[1] = {
-+		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
-+		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+
-+static int tosa_tc6393xb_enable(struct platform_device *dev)
-+{
-+
-+	reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON);
-+	reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND);
-+	reset_scoop_gpio(&tosascoop_device.dev, TOSA_SCOOP_TC6393XB_REST_IN);      /* #PCLR */
-+	pxa_gpio_mode(GPIO11_3_6MHz_MD);
-+	pxa_gpio_mode(GPIO18_RDY_MD);
-+	mdelay(1);
-+	set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND);
-+	mdelay(10);
-+	set_scoop_gpio(&tosascoop_device.dev, TOSA_SCOOP_TC6393XB_REST_IN);        /* #PCLR */
-+	set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON);
-+
-+	return 0;
-+}
-+
-+static int tosa_tc6393xb_disable(struct platform_device *dev)
-+{
-+
-+	reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON);
-+	reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND);
-+	reset_scoop_gpio(&tosascoop_device.dev, TOSA_SCOOP_TC6393XB_REST_IN);      /* #PCLR */
-+	pxa_gpio_mode(GPIO11_3_6MHz_MD|GPIO_OUT);
-+	GPSR0 = GPIO_bit(GPIO11_3_6MHz);
-+
-+	return 0;
-+}
-+
-+static int tosa_tc6393xb_resume(struct platform_device *dev)
-+{
-+
-+	pxa_gpio_mode(GPIO11_3_6MHz_MD);
-+	pxa_gpio_mode(GPIO18_RDY_MD);
-+	mdelay(1);
-+	set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND);
-+	mdelay(10);
-+	set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON);
-+	mdelay(10);
-+
-+	return 0;
-+}
-+
-+static int tosa_tc6393xb_suspend(struct platform_device *dev)
-+{
-+
-+	reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON);
-+	reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND);
-+	pxa_gpio_mode(GPIO11_3_6MHz_MD|GPIO_OUT);
-+	GPSR0 = GPIO_bit(GPIO11_3_6MHz);
-+
-+	return 0;
-+}
-+
-+static struct mtd_partition tosa_nand_partition[] = {
-+	{
-+		.name = "smf",
-+		.offset = 0,
-+		.size = 7 * 1024 * 1024,
-+	},
-+	{
-+		.name = "root",
-+		.offset = MTDPART_OFS_APPEND,
-+		.size = 28 * 1024 * 1024,
-+	},
-+	{
-+		.name = "home",
-+		.offset = MTDPART_OFS_APPEND,
-+		.size = MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+
-+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
-+	.options = 0,
-+	.offs = 4,
-+	.len = 2,
-+	.pattern = scan_ff_pattern
-+};
-+
-+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
-+	.num_partitions = ARRAY_SIZE(tosa_nand_partition),
-+	.partition = tosa_nand_partition,
-+	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
-+};
-+
-+static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
-+	{
-+		.xres = 480,
-+		.yres = 640,
-+		.pixclock = 0x002cdf00,/* PLL divisor */
-+		.left_margin = 0x004c,
-+		.right_margin = 0x005b,
-+		.upper_margin = 0x0001,
-+		.lower_margin = 0x000d,
-+		.hsync_len = 0x0002,
-+		.vsync_len = 0x0001,
-+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+		.vmode = FB_VMODE_NONINTERLACED,
-+	},{
-+		.xres = 240,
-+		.yres = 320,
-+		.pixclock = 0x00e7f203,/* PLL divisor */
-+		.left_margin = 0x0024,
-+		.right_margin = 0x002f,
-+		.upper_margin = 0x0001,
-+		.lower_margin = 0x000d,
-+		.hsync_len = 0x0002,
-+		.vsync_len = 0x0001,
-+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+		.vmode = FB_VMODE_NONINTERLACED,
-+	}
-+};
-+
-+static struct tmio_fb_data tosa_tc6393xb_fb_config = {
-+	.lcd_set_power	= tc6393xb_lcd_set_power,
-+	.lcd_mode	= tc6393xb_lcd_mode,
-+	.num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
-+	.modes		= &tosa_tc6393xb_lcd_mode[0],
-+};
-+
-+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
-+	.scr_pll2cr	= 0x0cc1,
-+	.scr_ccr = TC6393XB_CCR_UNK1 | TC6393XB_CCR_HCLK_48,
-+	.scr_gper	= 0x3300,
-+	.scr_gpo_dsr	= TOSA_TC6393XB_CARD_VCC_ON | TOSA_TC6393XB_CHARGE_OFF_JC,
-+	.scr_gpo_doecr	= TOSA_TC6393XB_GPO_OE,
-+
-+	.irq_base	= IRQ_BOARD_START,
-+
-+	.enable		= tosa_tc6393xb_enable,
-+	.disable	= tosa_tc6393xb_disable,
-+	.suspend	= tosa_tc6393xb_suspend,
-+	.resume		= tosa_tc6393xb_resume,
-+
-+	.nand_data	= &tosa_tc6393xb_nand_config,
-+	.fb_data	= &tosa_tc6393xb_fb_config,
-+};
-+
-+
-+struct platform_device tc6393xb_device = {
-+	.name	= "tc6393xb",
-+	.id	= -1,
-+	.dev	= {
-+		.platform_data	= &tosa_tc6393xb_setup,
-+	},
-+	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
-+	.resource	= tc6393xb_resources,
-+};
-+EXPORT_SYMBOL(tc6393xb_device);
-+
- static struct platform_device *devices[] __initdata = {
- 	&tosascoop_device,
- 	&tosascoop_jc_device,
- 	&tosakbd_device,
- 	&tosa_gpio_keys_device,
- 	&tosaled_device,
-+	&tc6393xb_device,
- };
- 
- static void tosa_poweroff(void)
-@@ -332,7 +509,7 @@ static void __init tosa_init(void)
- 	arm_pm_restart = tosa_restart;
- 
- 	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
--	pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
-+	pxa_gpio_mode(TOSA_GPIO_TC6393XB_INT | GPIO_IN);
- 	pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
- 
- 	/* setup sleep mode values */
-diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
-index b76ee6d..bf622d8 100644
---- a/include/asm-arm/arch-pxa/irqs.h
-+++ b/include/asm-arm/arch-pxa/irqs.h
-@@ -180,6 +180,7 @@
- #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
- #elif defined(CONFIG_ARCH_LUBBOCK) || \
-       defined(CONFIG_MACH_LOGICPD_PXA270) || \
-+      defined(CONFIG_MACH_TOSA) || \
-       defined(CONFIG_MACH_MAINSTONE)
- #define NR_IRQS			(IRQ_BOARD_END)
- #else
-diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
-index c05e4fa..1b202b2 100644
---- a/include/asm-arm/arch-pxa/tosa.h
-+++ b/include/asm-arm/arch-pxa/tosa.h
-@@ -20,11 +20,35 @@
- /* Jacket Scoop */
- #define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
- 
-+#define TC6393XB_GPIO(i)		(1 << (i))
-+/*
-+ * TC6393 GPIOs
-+ */
-+#define TOSA_TC6393XB_TG_ON  		TC6393XB_GPIO(0)
-+#define TOSA_TC6393XB_L_MUTE  		TC6393XB_GPIO(1)
-+#define TOSA_TC6393XB_BL_C20MA		TC6393XB_GPIO(3)
-+#define TOSA_TC6393XB_CARD_VCC_ON 	TC6393XB_GPIO(4)
-+#define TOSA_TC6393XB_CHARGE_OFF 		TC6393XB_GPIO(6)
-+#define TOSA_TC6393XB_CHARGE_OFF_JC 	TC6393XB_GPIO(7)
-+#define TOSA_TC6393XB_BAT0_V_ON 		TC6393XB_GPIO(9)
-+#define TOSA_TC6393XB_BAT1_V_ON 		TC6393XB_GPIO(10)
-+#define TOSA_TC6393XB_BU_CHRG_ON 		TC6393XB_GPIO(11)
-+#define TOSA_TC6393XB_BAT_SW_ON 		TC6393XB_GPIO(12)
-+#define TOSA_TC6393XB_BAT0_TH_ON 		TC6393XB_GPIO(14)
-+#define TOSA_TC6393XB_BAT1_TH_ON 		TC6393XB_GPIO(15)
-+
-+#define TOSA_TC6393XB_GPO_OE (TOSA_TC6393XB_TG_ON | TOSA_TC6393XB_L_MUTE | TOSA_TC6393XB_BL_C20MA | \
-+		TOSA_TC6393XB_CARD_VCC_ON | TOSA_TC6393XB_CHARGE_OFF | \
-+		TOSA_TC6393XB_CHARGE_OFF_JC | TOSA_TC6393XB_BAT0_V_ON | \
-+		TOSA_TC6393XB_BAT1_V_ON | TOSA_TC6393XB_BU_CHRG_ON | \
-+		TOSA_TC6393XB_BAT_SW_ON | TOSA_TC6393XB_BAT0_TH_ON | \
-+		TOSA_TC6393XB_BAT1_TH_ON)
-+
- /*
-  * SCOOP2 internal GPIOs
-  */
- #define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
--#define TOSA_SCOOP_TC6393_REST_IN	SCOOP_GPCR_PA12
-+#define TOSA_SCOOP_TC6393XB_REST_IN	SCOOP_GPCR_PA12
- #define TOSA_SCOOP_IR_POWERDWN		SCOOP_GPCR_PA13
- #define TOSA_SCOOP_SD_WP		SCOOP_GPCR_PA14
- #define TOSA_SCOOP_PWR_ON		SCOOP_GPCR_PA15
-@@ -34,11 +58,11 @@
- #define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
- 
- /* GPIO Direction   1 : output mode / 0:input mode */
--#define TOSA_SCOOP_IO_DIR     ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
-+#define TOSA_SCOOP_IO_DIR     ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393XB_REST_IN | \
- 		TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\
- 		TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
- /* GPIO out put level when init   1: Hi */
--#define TOSA_SCOOP_IO_OUT     ( TOSA_SCOOP_TC6393_REST_IN )
-+#define TOSA_SCOOP_IO_OUT     ( TOSA_SCOOP_TC6393XB_REST_IN )
- 
- /*
-  * SCOOP2 jacket GPIOs
-@@ -47,8 +71,8 @@
- #define TOSA_SCOOP_JC_NOTE_LED		SCOOP_GPCR_PA12
- #define TOSA_SCOOP_JC_CHRG_ERR_LED	SCOOP_GPCR_PA13
- #define TOSA_SCOOP_JC_USB_PULLUP	SCOOP_GPCR_PA14
--#define TOSA_SCOOP_JC_TC6393_SUSPEND	SCOOP_GPCR_PA15
--#define TOSA_SCOOP_JC_TC3693_L3V_ON	SCOOP_GPCR_PA16
-+#define TOSA_SCOOP_JC_TC6393XB_SUSPEND	SCOOP_GPCR_PA15
-+#define TOSA_SCOOP_JC_TC6393XB_L3V_ON	SCOOP_GPCR_PA16
- #define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
- #define TOSA_SCOOP_JC_WLAN_LED		SCOOP_GPCR_PA18
- #define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
-@@ -56,7 +80,7 @@
- /* GPIO Direction   1 : output mode / 0:input mode */
- #define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \
- 		TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \
--		TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
-+		TOSA_SCOOP_JC_TC6393XB_SUSPEND | TOSA_SCOOP_JC_TC6393XB_L3V_ON | \
- 		TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL )
- /* GPIO out put level when init   1: Hi */
- #define TOSA_SCOOP_JC_IO_OUT ( 0 )
-@@ -94,13 +118,13 @@
- #define TOSA_GPIO_JACKET_DETECT		(7)
- #define TOSA_GPIO_nSD_DETECT		(9)
- #define TOSA_GPIO_nSD_INT		(10)
--#define TOSA_GPIO_TC6393_CLK		(11)
-+#define TOSA_GPIO_TC6393XB_CLK		(11)
- #define TOSA_GPIO_BAT1_CRG		(12)
- #define TOSA_GPIO_CF_CD			(13)
- #define TOSA_GPIO_BAT0_CRG		(14)
--#define TOSA_GPIO_TC6393_INT		(15)
-+#define TOSA_GPIO_TC6393XB_INT		(15)
- #define TOSA_GPIO_BAT0_LOW		(17)
--#define TOSA_GPIO_TC6393_RDY		(18)
-+#define TOSA_GPIO_TC6393XB_RDY		(18)
- #define TOSA_GPIO_ON_RESET		(19)
- #define TOSA_GPIO_EAR_IN		(20)
- #define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
-@@ -147,7 +171,7 @@
- #define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
- #define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
- #define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
--#define TOSA_IRQ_GPIO_TC6393_INT    	IRQ_GPIO(TOSA_GPIO_TC6393_INT)
-+#define TOSA_IRQ_GPIO_TC6393XB_INT    	IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
- #define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
- #define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
- #define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)
-@@ -161,6 +185,7 @@
- 
- #define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
- 
-+extern struct platform_device tc6393xb_device;
- extern struct platform_device tosascoop_jc_device;
- extern struct platform_device tosascoop_device;
- 
-diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
-index 5504e30..21c51b5 100644
---- a/sound/soc/pxa/tosa.c
-+++ b/sound/soc/pxa/tosa.c
-@@ -32,7 +32,6 @@
- #include <sound/soc-dapm.h>
- 
- #include <asm/mach-types.h>
--#include <asm/hardware/tmio.h>
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/hardware.h>
- #include <asm/arch/audio.h>
-@@ -138,10 +137,12 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol,
- /* tosa dapm event handlers */
- static int tosa_hp_event(struct snd_soc_dapm_widget *w, int event)
- {
-+#if 0
- 	if (SND_SOC_DAPM_EVENT_ON(event))
- 		set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
- 	else
- 		reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
-+#endif
- 	return 0;
- }
- 
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0050-tosa-update-for-tc6393xb-gpio.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0050-tosa-update-for-tc6393xb-gpio.patch
deleted file mode 100644
index c9b5ac29d4..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0050-tosa-update-for-tc6393xb-gpio.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From f24c23ba56cdd072b332e8de3e0cff8a31e7e36a Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:03:19 +0300
-Subject: [PATCH 50/64] tosa update for tc6393xb gpio
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/tosa.c        |    6 +++++-
- include/asm-arm/arch-pxa/tosa.h |   36 ++++++++++++++++++++++++------------
- 2 files changed, 29 insertions(+), 13 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index e2eec0f..3e832dc 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -35,6 +35,7 @@
- #include <asm/mach-types.h>
- #include <asm/hardware.h>
- #include <asm/irq.h>
-+#include <asm/gpio.h>
- #include <asm/system.h>
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/irda.h>
-@@ -448,10 +449,13 @@ static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
- 	.scr_pll2cr	= 0x0cc1,
- 	.scr_ccr = TC6393XB_CCR_UNK1 | TC6393XB_CCR_HCLK_48,
- 	.scr_gper	= 0x3300,
--	.scr_gpo_dsr	= TOSA_TC6393XB_CARD_VCC_ON | TOSA_TC6393XB_CHARGE_OFF_JC,
-+	.scr_gpo_dsr	=
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_CARD_VCC_ON) |
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_CHARGE_OFF_JC),
- 	.scr_gpo_doecr	= TOSA_TC6393XB_GPO_OE,
- 
- 	.irq_base	= IRQ_BOARD_START,
-+	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
- 
- 	.enable		= tosa_tc6393xb_enable,
- 	.disable	= tosa_tc6393xb_disable,
-diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
-index 1b202b2..410fa9a 100644
---- a/include/asm-arm/arch-pxa/tosa.h
-+++ b/include/asm-arm/arch-pxa/tosa.h
-@@ -20,16 +20,21 @@
- /* Jacket Scoop */
- #define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
- 
--#define TC6393XB_GPIO(i)		(1 << (i))
- /*
-  * TC6393 GPIOs
-  */
--#define TOSA_TC6393XB_TG_ON  		TC6393XB_GPIO(0)
--#define TOSA_TC6393XB_L_MUTE  		TC6393XB_GPIO(1)
--#define TOSA_TC6393XB_BL_C20MA		TC6393XB_GPIO(3)
--#define TOSA_TC6393XB_CARD_VCC_ON 	TC6393XB_GPIO(4)
-+
-+#define TOSA_TC6393XB_GPIO_BASE		NR_BUILTIN_GPIO
-+
-+#define TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
-+#define TC6393XB_GPIO_BIT(gpio)			(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
-+
-+#define TOSA_TC6393XB_TG_ON  			TC6393XB_GPIO(0)
-+#define TOSA_TC6393XB_L_MUTE  			TC6393XB_GPIO(1)
-+#define TOSA_TC6393XB_BL_C20MA			TC6393XB_GPIO(3)
-+#define TOSA_TC6393XB_CARD_VCC_ON 		TC6393XB_GPIO(4)
- #define TOSA_TC6393XB_CHARGE_OFF 		TC6393XB_GPIO(6)
--#define TOSA_TC6393XB_CHARGE_OFF_JC 	TC6393XB_GPIO(7)
-+#define TOSA_TC6393XB_CHARGE_OFF_JC 		TC6393XB_GPIO(7)
- #define TOSA_TC6393XB_BAT0_V_ON 		TC6393XB_GPIO(9)
- #define TOSA_TC6393XB_BAT1_V_ON 		TC6393XB_GPIO(10)
- #define TOSA_TC6393XB_BU_CHRG_ON 		TC6393XB_GPIO(11)
-@@ -37,12 +42,19 @@
- #define TOSA_TC6393XB_BAT0_TH_ON 		TC6393XB_GPIO(14)
- #define TOSA_TC6393XB_BAT1_TH_ON 		TC6393XB_GPIO(15)
- 
--#define TOSA_TC6393XB_GPO_OE (TOSA_TC6393XB_TG_ON | TOSA_TC6393XB_L_MUTE | TOSA_TC6393XB_BL_C20MA | \
--		TOSA_TC6393XB_CARD_VCC_ON | TOSA_TC6393XB_CHARGE_OFF | \
--		TOSA_TC6393XB_CHARGE_OFF_JC | TOSA_TC6393XB_BAT0_V_ON | \
--		TOSA_TC6393XB_BAT1_V_ON | TOSA_TC6393XB_BU_CHRG_ON | \
--		TOSA_TC6393XB_BAT_SW_ON | TOSA_TC6393XB_BAT0_TH_ON | \
--		TOSA_TC6393XB_BAT1_TH_ON)
-+#define TOSA_TC6393XB_GPO_OE (			\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_TG_ON) |		\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_L_MUTE) |		\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_BL_C20MA) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_CARD_VCC_ON) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_CHARGE_OFF) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_CHARGE_OFF_JC) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT0_V_ON) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT1_V_ON) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_BU_CHRG_ON) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT_SW_ON) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT0_TH_ON) |	\
-+		TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT1_TH_ON))
- 
- /*
-  * SCOOP2 internal GPIOs
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0051-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0051-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch
deleted file mode 100644
index 585f1af288..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0051-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 38ef1b452cc3138157b92d02b31cad439d12d0ca Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:03:34 +0300
-Subject: [PATCH 51/64] fix sound/soc/pxa/tosa.c to new gpio api
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- sound/soc/pxa/tosa.c |   33 ++++++++++++++++++++++++++-------
- 1 files changed, 26 insertions(+), 7 deletions(-)
-
-diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
-index 21c51b5..b758de8 100644
---- a/sound/soc/pxa/tosa.c
-+++ b/sound/soc/pxa/tosa.c
-@@ -36,6 +36,7 @@
- #include <asm/arch/hardware.h>
- #include <asm/arch/audio.h>
- #include <asm/arch/tosa.h>
-+#include <asm/gpio.h>
- 
- #include "../codecs/wm9712.h"
- #include "pxa2xx-pcm.h"
-@@ -137,11 +138,11 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol,
- /* tosa dapm event handlers */
- static int tosa_hp_event(struct snd_soc_dapm_widget *w, int event)
- {
--#if 0
-+#ifdef CONFIG_MFD_TC6393XB
- 	if (SND_SOC_DAPM_EVENT_ON(event))
--		set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
-+		gpio_set_value(TOSA_TC6393XB_L_MUTE, 1);
- 	else
--		reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
-+		gpio_set_value(TOSA_TC6393XB_L_MUTE, 0);
- #endif
- 	return 0;
- }
-@@ -262,16 +263,31 @@ static int __init tosa_init(void)
- 	if (!machine_is_tosa())
- 		return -ENODEV;
- 
-+#ifdef CONFIG_MFD_TC6393XB
-+	ret = gpio_request(TOSA_TC6393XB_L_MUTE, "Headphone Jack");
-+	if (ret)
-+		return ret;
-+	gpio_direction_output(TOSA_TC6393XB_L_MUTE, 0);
-+#endif
- 	tosa_snd_device = platform_device_alloc("soc-audio", -1);
--	if (!tosa_snd_device)
--		return -ENOMEM;
-+	if (!tosa_snd_device) {
-+		ret = -ENOMEM;
-+		goto err_alloc;
-+	}
- 
- 	platform_set_drvdata(tosa_snd_device, &tosa_snd_devdata);
- 	tosa_snd_devdata.dev = &tosa_snd_device->dev;
- 	ret = platform_device_add(tosa_snd_device);
- 
--	if (ret)
--		platform_device_put(tosa_snd_device);
-+	if (!ret)
-+		return 0;
-+
-+	platform_device_put(tosa_snd_device);
-+
-+err_alloc:
-+#ifdef CONFIG_MFD_TC6393XB
-+	gpio_free(TOSA_TC6393XB_L_MUTE);
-+#endif
- 
- 	return ret;
- }
-@@ -279,6 +295,9 @@ static int __init tosa_init(void)
- static void __exit tosa_exit(void)
- {
- 	platform_device_unregister(tosa_snd_device);
-+#ifdef CONFIG_MFD_TC6393XB
-+	gpio_free(TOSA_TC6393XB_L_MUTE);
-+#endif
- }
- 
- module_init(tosa_init);
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0052-tosa-platform-backlight-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0052-tosa-platform-backlight-support.patch
deleted file mode 100644
index ef5263c18e..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0052-tosa-platform-backlight-support.patch
+++ /dev/null
@@ -1,400 +0,0 @@
-From c7537657bc33d4ee1616accd0259e160d57c5c1b Mon Sep 17 00:00:00 2001
-From: Ian Molton <spyro@f2s.com>
-Date: Wed, 9 Jan 2008 02:05:40 +0300
-Subject: [PATCH 52/64] tosa platform backlight support
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/video/backlight/Kconfig   |   10 +
- drivers/video/backlight/Makefile  |    1 +
- drivers/video/backlight/tosa_bl.c |  345 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 356 insertions(+), 0 deletions(-)
- create mode 100644 drivers/video/backlight/tosa_bl.c
-
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index 9609a6c..f47a601 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -59,6 +59,16 @@ config BACKLIGHT_CORGI
- 	  known as the Corgi backlight driver. If you have a Sharp Zaurus
- 	  SL-C7xx, SL-Cxx00 or SL-6000x say y. Most users can say n.
- 
-+config BACKLIGHT_TOSA
-+	tristate "Sharp Tosa LCD/Backlight Driver (SL-6000)"
-+	depends on BACKLIGHT_CLASS_DEVICE && MACH_TOSA
-+	default y
-+	select I2C
-+	select I2C_PXA
-+	select PXA_SSP
-+	help
-+	  If you have a Sharp Zaurus SL-6000y enable this driver.
-+
- config BACKLIGHT_LOCOMO
- 	tristate "Sharp LOCOMO LCD/Backlight Driver"
- 	depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index 965a78b..e8a6a7c 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
- 
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
-+obj-$(CONFIG_BACKLIGHT_TOSA)	+= tosa_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
- obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
- obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
-diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
-new file mode 100644
-index 0000000..11a89c6
---- /dev/null
-+++ b/drivers/video/backlight/tosa_bl.c
-@@ -0,0 +1,345 @@
-+/*
-+ *  LCD / Backlight control code for Sharp SL-6000x (tosa)
-+ *
-+ *  Copyright (c) 2005		Dirk Opfer
-+ *  Copyright (c) 2007		Dmitry Baryshkov
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/i2c.h>
-+#include <linux/backlight.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/fb.h>
-+#include <linux/mfd/tc6393xb.h>
-+
-+#include <asm/hardware/scoop.h>
-+#include <asm/mach/sharpsl_param.h>
-+#include <asm/arch/ssp.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/tosa.h>
-+#include <asm/gpio.h>
-+
-+#define	DAC_BASE	0x4e
-+#define DAC_CH1		0
-+#define DAC_CH2		1
-+
-+#define TG_REG0_VQV	0x0001
-+#define TG_REG0_COLOR	0x0002
-+#define TG_REG0_UD	0x0004
-+#define TG_REG0_LR	0x0008
-+#define COMADJ_DEFAULT 	97
-+
-+static unsigned short normal_i2c[] = { DAC_BASE, I2C_CLIENT_END };
-+I2C_CLIENT_INSMOD;
-+
-+struct tosa_bl_data {
-+	struct i2c_client	client;
-+
-+	int			comadj;
-+	spinlock_t		nssp_lock;
-+	struct ssp_dev		nssp_dev;
-+	struct ssp_state	nssp_state;
-+
-+	struct backlight_device	*bl_dev;
-+};
-+
-+static struct i2c_driver tosa_bl_driver;
-+
-+static void pxa_nssp_output(struct tosa_bl_data *data, unsigned char reg, unsigned char value)
-+{
-+	unsigned long flag;
-+	u32 dummy;
-+	u32 dat = ( ((reg << 5) & 0xe0) | (value & 0x1f) );
-+	spin_lock_irqsave(&data->nssp_lock, flag);
-+
-+	ssp_config(&data->nssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(128));
-+	ssp_enable(&data->nssp_dev);
-+
-+	ssp_write_word(&data->nssp_dev,dat);
-+
-+	/* Read null data back from device to prevent SSP overflow */
-+	ssp_read_word(&data->nssp_dev, &dummy);
-+	ssp_disable(&data->nssp_dev);
-+	spin_unlock_irqrestore(&data->nssp_lock, flag);
-+
-+}
-+
-+static void tosa_set_backlight(struct tosa_bl_data *data, int brightness)
-+{
-+	/* SetBacklightDuty */
-+	i2c_smbus_write_byte_data(&data->client, DAC_CH2, (unsigned char)brightness);
-+
-+	/* SetBacklightVR */
-+	if (brightness)
-+		gpio_set_value(TOSA_TC6393XB_BL_C20MA, 1);
-+	else
-+		gpio_set_value(TOSA_TC6393XB_BL_C20MA, 0);
-+
-+	/* bl_enable GP04=1 otherwise GP04=0*/
-+	pxa_nssp_output(data, TG_GPODR2, brightness ? 0x01 : 0x00);
-+}
-+
-+static void tosa_lcd_tg_init(struct tosa_bl_data *data)
-+{
-+	dev_dbg(&data->bl_dev->dev, "tosa_lcd_init\n");
-+
-+	/* L3V On */
-+	set_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC6393XB_L3V_ON);
-+	mdelay(60);
-+
-+	/* TG On */
-+	gpio_set_value(TOSA_TC6393XB_TG_ON, 0);
-+	mdelay(60);
-+
-+	pxa_nssp_output(data, TG_TPOSCTL,0x00);	/* delayed 0clk TCTL signal for VGA */
-+	pxa_nssp_output(data, TG_GPOSR,0x02);		/* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */
-+}
-+
-+static void tosa_lcd_tg_on(struct tosa_bl_data *data/*, const struct fb_videomode *mode*/)
-+{
-+	const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR;
-+
-+	tosa_lcd_tg_init(data);
-+
-+	dev_dbg(&data->bl_dev->dev, "tosa_lcd_on\n");
-+	pxa_nssp_output(data, TG_PNLCTL, value | (/*mode->yres == 320 ? 0 : */ TG_REG0_VQV));
-+
-+	/* TG LCD pannel power up */
-+	pxa_nssp_output(data, TG_PINICTL,0x4);
-+	mdelay(50);
-+
-+	/* TG LCD GVSS */
-+	pxa_nssp_output(data, TG_PINICTL,0x0);
-+	mdelay(50);
-+
-+	/* set common voltage */
-+	i2c_smbus_write_byte_data(&data->client, DAC_CH1, data->comadj);
-+}
-+
-+static void tosa_lcd_tg_off(struct tosa_bl_data *data)
-+{
-+	tosa_set_backlight(data, 0);
-+	dev_dbg(&data->bl_dev->dev, "tosa_lcd_off\n");
-+	/* TG LCD VHSA off */
-+	pxa_nssp_output(data, TG_PINICTL,0x4);
-+	mdelay(50);
-+
-+	/* TG LCD signal off */
-+	pxa_nssp_output(data, TG_PINICTL,0x6);
-+	mdelay(50);
-+
-+	/* TG Off */
-+	gpio_set_value(TOSA_TC6393XB_TG_ON, 1);
-+	mdelay(100);
-+
-+	/* L3V Off */
-+	reset_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC6393XB_L3V_ON);
-+}
-+
-+
-+static int tosa_bl_update_status(struct backlight_device *dev)
-+{
-+	struct backlight_properties *props = &dev->props;
-+	struct tosa_bl_data *data = dev_get_drvdata(&dev->dev);
-+	int new_power = max(props->power, props->fb_blank);
-+
-+	tosa_set_backlight(data, props->brightness);
-+
-+	if (new_power)
-+		tosa_lcd_tg_off(data);
-+	else
-+		tosa_lcd_tg_on(data);
-+
-+	return 0;
-+}
-+
-+static int tosa_bl_get_brightness(struct backlight_device *dev)
-+{
-+	struct backlight_properties *props = &dev->props;
-+
-+	return props->brightness;
-+}
-+
-+static struct backlight_ops tosa_bl_ops = {
-+	.get_brightness		= tosa_bl_get_brightness,
-+	.update_status		= tosa_bl_update_status,
-+};
-+
-+static int tosa_bl_detect_client(struct i2c_adapter *adapter, int address,
-+                        int kind)
-+{
-+	int err = 0;
-+	struct i2c_client *client;
-+	struct tosa_bl_data *data;
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA ))
-+		goto out;
-+
-+	if (!(data = kzalloc(sizeof(struct tosa_bl_data), GFP_KERNEL))) {
-+		err = -ENOMEM;
-+		goto out;
-+	}
-+
-+	client = &data->client;
-+	i2c_set_clientdata(client, data);
-+
-+	client->addr = address;
-+	client->adapter = adapter;
-+	client->driver = &tosa_bl_driver;
-+
-+	strlcpy(client->name, "tosa_bl", I2C_NAME_SIZE);
-+
-+	spin_lock_init(&data->nssp_lock);
-+	data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
-+
-+	err = gpio_request(TOSA_TC6393XB_BL_C20MA, "backlight");
-+	if (err) {
-+		dev_dbg(&data->bl_dev->dev, "Unable to request gpio!\n");
-+		goto err_gpio_bl;
-+	}
-+
-+	err = gpio_request(TOSA_TC6393XB_TG_ON, "tg");
-+	if (err) {
-+		dev_dbg(&data->bl_dev->dev, "Unable to request gpio!\n");
-+		goto err_gpio_tg;
-+	}
-+
-+	err = ssp_init(&data->nssp_dev,2,0);
-+	if (err) {
-+		dev_err(&data->bl_dev->dev, "Unable to register NSSP handler!\n");
-+		goto err_ssp_init;
-+	}
-+
-+	/* Tell the i2c layer a new client has arrived */
-+	err = i2c_attach_client(client);
-+	if (err)
-+		goto err_i2c_attach;
-+
-+	gpio_direction_output(TOSA_TC6393XB_BL_C20MA, 0);
-+	gpio_direction_output(TOSA_TC6393XB_TG_ON, 1);
-+
-+	tosa_lcd_tg_init(data);
-+
-+	data->bl_dev = backlight_device_register("tosa_bl",
-+			&client->dev, data, &tosa_bl_ops);
-+	if (err)
-+		goto err_bl_register;
-+
-+	data->bl_dev->props.brightness = 69;
-+	data->bl_dev->props.max_brightness = 255;
-+	data->bl_dev->props.power = FB_BLANK_UNBLANK;
-+	backlight_update_status(data->bl_dev);
-+
-+
-+	return 0;
-+
-+err_bl_register:
-+	tosa_set_backlight(data, 0);
-+	tosa_lcd_tg_off(data);
-+
-+	err = i2c_detach_client(client);
-+	if (err)
-+		return err;
-+err_i2c_attach:
-+	ssp_exit(&data->nssp_dev);
-+err_ssp_init:
-+	gpio_free(TOSA_TC6393XB_TG_ON);
-+err_gpio_tg:
-+	gpio_free(TOSA_TC6393XB_BL_C20MA);
-+err_gpio_bl:
-+	kfree(data);
-+out:
-+	return err;
-+}
-+
-+static int tosa_bl_detach_client(struct i2c_client *client)
-+{
-+	int err = 0;
-+	struct tosa_bl_data *data = i2c_get_clientdata(client);
-+
-+	backlight_device_unregister(data->bl_dev);
-+
-+	tosa_set_backlight(data, 0);
-+	tosa_lcd_tg_off(data);
-+
-+	/* Try to detach the client from i2c space */
-+	if ((err = i2c_detach_client(client)))
-+		return err;
-+
-+	ssp_exit(&data->nssp_dev);
-+
-+	gpio_free(TOSA_TC6393XB_TG_ON);
-+	gpio_free(TOSA_TC6393XB_BL_C20MA);
-+
-+	kfree(data);
-+
-+	return err;
-+}
-+
-+#ifdef CONFIG_PM
-+static int tosa_bl_suspend(struct i2c_client *client, pm_message_t mesg)
-+{
-+	struct tosa_bl_data *data = i2c_get_clientdata(client);
-+
-+	tosa_lcd_tg_off(data);
-+	ssp_flush(&data->nssp_dev);
-+	ssp_save_state(&data->nssp_dev,&data->nssp_state);
-+
-+	return 0;
-+}
-+
-+static int tosa_bl_resume(struct i2c_client *client)
-+{
-+	struct tosa_bl_data *data = i2c_get_clientdata(client);
-+
-+	ssp_restore_state(&data->nssp_dev,&data->nssp_state);
-+	ssp_enable(&data->nssp_dev);
-+	tosa_bl_update_status(data->bl_dev);
-+
-+	return 0;
-+}
-+#else
-+#define tosa_bl_suspend NULL
-+#define tosa_bl_resume NULL
-+#endif
-+
-+static int tosa_bl_attach_adapter(struct i2c_adapter *adapter)
-+{
-+	return i2c_probe(adapter, &addr_data, &tosa_bl_detect_client);
-+}
-+
-+static struct i2c_driver tosa_bl_driver = {
-+	.driver = {
-+		.name	= "tosa_bl",
-+	},
-+
-+	.attach_adapter	= tosa_bl_attach_adapter,
-+	.detach_client	= tosa_bl_detach_client,
-+
-+	.suspend	= tosa_bl_suspend,
-+	.resume		= tosa_bl_resume,
-+};
-+
-+static int __init tosa_bl_init(void)
-+{
-+	return i2c_add_driver(&tosa_bl_driver);
-+}
-+
-+static void __exit tosa_bl_cleanup (void)
-+{
-+	i2c_del_driver(&tosa_bl_driver);
-+}
-+
-+module_init(tosa_bl_init);
-+module_exit(tosa_bl_cleanup);
-+
-+MODULE_DESCRIPTION("Tosa LCD device");
-+MODULE_AUTHOR("Dirk Opfer, Dmitry Baryshkov");
-+MODULE_LICENSE("GPL v2");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0053-sound-soc-codecs-wm9712.c-28.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0053-sound-soc-codecs-wm9712.c-28.patch
deleted file mode 100644
index 0675342508..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0053-sound-soc-codecs-wm9712.c-28.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 47616d22f8f303dfd66cf3b9125af212194a0f3c Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 9 Jan 2008 02:08:17 +0300
-Subject: [PATCH 53/64]  sound/soc/codecs/wm9712.c |   28 ++++++++++++++++++----------
-  1 file changed, 18 insertions(+), 10 deletions(-)
-
-Index: git/sound/soc/codecs/wm9712.c
-===================================================================
----
- sound/soc/codecs/wm9712.c |   28 ++++++++++++++++++----------
- 1 files changed, 18 insertions(+), 10 deletions(-)
-
-diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
-index 986b5d5..dfb31e1 100644
---- a/sound/soc/codecs/wm9712.c
-+++ b/sound/soc/codecs/wm9712.c
-@@ -606,18 +606,26 @@ static int wm9712_dapm_event(struct snd_soc_codec *codec, int event)
- 
- static int wm9712_reset(struct snd_soc_codec *codec, int try_warm)
- {
--	if (try_warm && soc_ac97_ops.warm_reset) {
--		soc_ac97_ops.warm_reset(codec->ac97);
--		if (!(ac97_read(codec, 0) & 0x8000))
--			return 1;
--	}
-+	int retry = 3;
- 
--	soc_ac97_ops.reset(codec->ac97);
--	if (ac97_read(codec, 0) & 0x8000)
--		goto err;
--	return 0;
-+	while (retry--)
-+	{
-+		if(try_warm && soc_ac97_ops.warm_reset) {
-+			soc_ac97_ops.warm_reset(codec->ac97);
-+			if(ac97_read(codec, 0) & 0x8000)
-+				continue;
-+			else
-+				return 1;
-+		}
-+
-+		soc_ac97_ops.reset(codec->ac97);
-+		if(ac97_read(codec, 0) & 0x8000)
-+			continue;
-+		else
-+			return 0;
-+
-+	}
- 
--err:
- 	printk(KERN_ERR "WM9712 AC97 reset failed\n");
- 	return -EIO;
- }
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0054-sound-soc-codecs-wm9712.c-2.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0054-sound-soc-codecs-wm9712.c-2.patch
deleted file mode 100644
index be7300ab24..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0054-sound-soc-codecs-wm9712.c-2.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 08fbae2307163b3f0c3b704c4b00a9447752a45e Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Thu, 10 Jan 2008 17:56:58 +0300
-Subject: [PATCH 54/64]  sound/soc/codecs/wm9712.c |    2 +-
-  1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: git/sound/soc/codecs/wm9712.c
-===================================================================
----
- sound/soc/codecs/wm9712.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
-index dfb31e1..a3d9f96 100644
---- a/sound/soc/codecs/wm9712.c
-+++ b/sound/soc/codecs/wm9712.c
-@@ -647,7 +647,7 @@ static int wm9712_soc_resume(struct platform_device *pdev)
- 	int i, ret;
- 	u16 *cache = codec->reg_cache;
- 
--	ret = wm9712_reset(codec, 1);
-+	ret = wm9712_reset(codec, 0);
- 	if (ret < 0){
- 		printk(KERN_ERR "could not reset AC97 codec\n");
- 		return ret;
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0055-Add-GPIO_POWERON-to-the-list-of-devices-that-we-supp.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0055-Add-GPIO_POWERON-to-the-list-of-devices-that-we-supp.patch
deleted file mode 100644
index 5bf691cbda..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0055-Add-GPIO_POWERON-to-the-list-of-devices-that-we-supp.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From bee8b808445a53a7dbb6c15a27064f14dec410c5 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Sun, 20 Jan 2008 03:01:41 +0300
-Subject: [PATCH 55/64] Add GPIO_POWERON to the list of devices that we support resume on.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/tosa.c |    6 +++---
- 1 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index 3e832dc..d1cf3dc 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -517,9 +517,9 @@ static void __init tosa_init(void)
- 	pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
- 
- 	/* setup sleep mode values */
--	PWER  = 0x00000002;
--	PFER  = 0x00000000;
--	PRER  = 0x00000002;
-+	PWER  = BIT(TOSA_GPIO_POWERON) | BIT(TOSA_GPIO_RESET);
-+	PFER  = 0;
-+	PRER  = BIT(TOSA_GPIO_POWERON) | BIT(TOSA_GPIO_RESET);
- 	PGSR0 = 0x00000000;
- 	PGSR1 = 0x00FF0002;
- 	PGSR2 = 0x00014000;
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch
deleted file mode 100644
index 99220f9200..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From e039614a0ce6df645f8fa4cbe32e4b21fe46a288 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Sun, 20 Jan 2008 02:44:03 +0300
-Subject: [PATCH 56/64] Support resetting by asserting GPIO pin
-
-This adds support for resetting via assertion of GPIO pin.
-This e.g. is used on Sharp Zaurus SL-6000.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/gpio.c          |   43 +++++++++++++++++++++++++++++++++++++
- arch/arm/mach-pxa/pm.c            |    4 +-
- include/asm-arm/arch-pxa/system.h |   10 ++++++++
- 3 files changed, 55 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
-index 8638dd7..589da3b 100644
---- a/arch/arm/mach-pxa/gpio.c
-+++ b/arch/arm/mach-pxa/gpio.c
-@@ -19,6 +19,7 @@
- #include <asm/hardware.h>
- #include <asm/io.h>
- #include <asm/arch/pxa-regs.h>
-+#include <asm/arch/system.h>
- 
- #include "generic.h"
- 
-@@ -194,4 +195,46 @@ void __init pxa_init_gpio(int gpio_nr)
- 			pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i;
- 		gpiochip_add(&pxa_gpio_chip[i/32].chip);
- 	}
-+
-+	if (reset_gpio < gpio_nr)
-+		init_reset_gpio();
-+}
-+
-+int reset_gpio = -1;
-+static int __init reset_gpio_setup(char *str)
-+{
-+	if (get_option(&str, &reset_gpio) != 1) {
-+		printk(KERN_ERR "reset_gpio: bad value secified");
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+__setup("reset_gpio=", reset_gpio_setup);
-+
-+int init_reset_gpio(void)
-+{
-+	int rc = 0;
-+	if (reset_gpio == -1)
-+		goto out;
-+
-+	rc = gpio_request(reset_gpio, "reset generator");
-+	if (rc) {
-+		printk(KERN_ERR "Can't request reset_gpio\n");
-+		goto out;
-+	}
-+
-+	rc = gpio_direction_input(reset_gpio);
-+	if (rc) {
-+		printk(KERN_ERR "Can't configure reset_gpio for input\n");
-+		gpio_free(reset_gpio);
-+		goto out;
-+	}
-+
-+out:
-+	if (rc)
-+		reset_gpio = -1;
-+
-+	return rc;
- }
-diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
-index a941c71..64f37e5 100644
---- a/arch/arm/mach-pxa/pm.c
-+++ b/arch/arm/mach-pxa/pm.c
-@@ -40,8 +40,8 @@ int pxa_pm_enter(suspend_state_t state)
- 
- 	pxa_cpu_pm_fns->save(sleep_save);
- 
--	/* Clear sleep reset status */
--	RCSR = RCSR_SMR;
-+	/* Clear reset status */
-+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
- 
- 	/* before sleeping, calculate and save a checksum */
- 	for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
-diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
-index 1d56a3e..c075018 100644
---- a/include/asm-arm/arch-pxa/system.h
-+++ b/include/asm-arm/arch-pxa/system.h
-@@ -11,6 +11,7 @@
-  */
- 
- #include <asm/proc-fns.h>
-+#include <asm/gpio.h>
- #include "hardware.h"
- #include "pxa-regs.h"
- 
-@@ -19,12 +20,21 @@ static inline void arch_idle(void)
- 	cpu_do_idle();
- }
- 
-+extern int reset_gpio;
-+
-+int init_reset_gpio(void);
- 
- static inline void arch_reset(char mode)
- {
-+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-+
- 	if (mode == 's') {
- 		/* Jump into ROM at address 0 */
- 		cpu_reset(0);
-+	} else if (mode == 'g' && reset_gpio != -1) {
-+		/* Use GPIO reset */
-+		gpio_direction_output(reset_gpio, 0);
-+		gpio_set_value(reset_gpio, 1);
- 	} else {
- 		/* Initialize the watchdog and let it fire */
- 		OWER = OWER_WME;
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0057-Clean-up-tosa-resetting.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0057-Clean-up-tosa-resetting.patch
deleted file mode 100644
index 441e1bba75..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0057-Clean-up-tosa-resetting.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From a6f03929fa4d20cef339dbed7ef5cd1e040d0548 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Sun, 20 Jan 2008 02:48:07 +0300
-Subject: [PATCH 57/64] Clean up tosa resetting
-
-Use new gpio-assertion reset.
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/tosa.c |   16 +++++++---------
- 1 files changed, 7 insertions(+), 9 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index d1cf3dc..2b4aef7 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -41,6 +41,8 @@
- #include <asm/arch/irda.h>
- #include <asm/arch/mmc.h>
- #include <asm/arch/udc.h>
-+#include <asm/arch/pm.h>
-+#include <asm/arch/system.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-@@ -489,13 +491,7 @@ static struct platform_device *devices[] __initdata = {
- 
- static void tosa_poweroff(void)
- {
--	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
--
--	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
--	GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
--
--	mdelay(1000);
--	arm_machine_restart('h');
-+	arm_machine_restart('g');
- }
- 
- static void tosa_restart(char mode)
-@@ -504,7 +500,7 @@ static void tosa_restart(char mode)
- 	if((MSC0 & 0xffff0000) == 0x7ff00000)
- 		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
- 
--	tosa_poweroff();
-+	arm_machine_restart('g');
- }
- 
- static void __init tosa_init(void)
-@@ -512,7 +508,6 @@ static void __init tosa_init(void)
- 	pm_power_off = tosa_poweroff;
- 	arm_pm_restart = tosa_restart;
- 
--	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
- 	pxa_gpio_mode(TOSA_GPIO_TC6393XB_INT | GPIO_IN);
- 	pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
- 
-@@ -544,6 +539,9 @@ static void __init fixup_tosa(struct machine_desc *desc,
- 	mi->bank[0].start = 0xa0000000;
- 	mi->bank[0].node = 0;
- 	mi->bank[0].size = (64*1024*1024);
-+
-+	if (reset_gpio == -1)
-+		reset_gpio = TOSA_GPIO_ON_RESET;
- }
- 
- MACHINE_START(TOSA, "SHARP Tosa")
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0058-Fix-tosakbd-suspend.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0058-Fix-tosakbd-suspend.patch
deleted file mode 100644
index e965857dff..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0058-Fix-tosakbd-suspend.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 8b57c409802e5feef64c4bb7659570e06558c0f2 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Sun, 20 Jan 2008 02:24:43 +0300
-Subject: [PATCH 58/64] Fix tosakbd suspend
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/input/keyboard/tosakbd.c |    3 +++
- 1 files changed, 3 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
-index 3884d1e..306cbe8 100644
---- a/drivers/input/keyboard/tosakbd.c
-+++ b/drivers/input/keyboard/tosakbd.c
-@@ -210,6 +210,9 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
- 
- 	del_timer_sync(&tosakbd->timer);
- 
-+	PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT);
-+	PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT);
-+
- 	return 0;
- }
- 
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0059-patch-tosa-wakeup-test.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0059-patch-tosa-wakeup-test.patch
deleted file mode 100644
index 812b5bad41..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0059-patch-tosa-wakeup-test.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 00f6e9b946d1f653fc776d71c86a1f6a7534cd1d Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Fri, 25 Jan 2008 19:16:20 +0300
-Subject: [PATCH 59/64] patch tosa-wakeup-test
-
----
- arch/arm/mach-pxa/tosa.c |   18 +++++++++++++++++-
- 1 files changed, 17 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index 2b4aef7..7008919 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -260,12 +260,28 @@ static struct platform_device tosakbd_device = {
- };
- 
- static struct gpio_keys_button tosa_gpio_keys[] = {
-+	/*
-+	 * Two following keys are directly tied to "ON" button of tosa. Why?
-+	 * The first one can be used as a wakeup source, the second can't:
-+	 * it's outside of permitted area.
-+	 */
-+	{
-+		.type	= EV_PWR,
-+		.code	= KEY_RESERVED,
-+		.gpio	= TOSA_GPIO_POWERON,
-+		.desc	= "Poweron",
-+		.wakeup	= 1,
-+		.active_low = 1,
-+	},
- 	{
- 		.type	= EV_PWR,
- 		.code	= KEY_SUSPEND,
- 		.gpio	= TOSA_GPIO_ON_KEY,
- 		.desc	= "On key",
--		.wakeup	= 1,
-+		/*
-+		 * can't be used as wakeup
-+		 * .wakeup	= 1,
-+		 */
- 		.active_low = 1,
- 	},
- 	{
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0060-Add-support-for-power_supply-on-tosa.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0060-Add-support-for-power_supply-on-tosa.patch
deleted file mode 100644
index f7420de040..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0060-Add-support-for-power_supply-on-tosa.patch
+++ /dev/null
@@ -1,623 +0,0 @@
-From f6ec15733eb55e851c8ad19c2143d425558f6044 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Mon, 4 Feb 2008 20:11:58 +0300
-Subject: [PATCH 60/64] Add support for power_supply on tosa
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/Makefile     |    2 +-
- arch/arm/mach-pxa/tosa_power.c |   82 +++++++
- drivers/leds/leds-tosa.c       |    2 +-
- drivers/power/Kconfig          |    7 +
- drivers/power/Makefile         |    1 +
- drivers/power/tosa_battery.c   |  458 ++++++++++++++++++++++++++++++++++++++++
- 6 files changed, 550 insertions(+), 2 deletions(-)
- create mode 100644 arch/arm/mach-pxa/tosa_power.c
- create mode 100644 drivers/power/tosa_battery.c
-
-diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
-index f276d24..2b68254 100644
---- a/arch/arm/mach-pxa/Makefile
-+++ b/arch/arm/mach-pxa/Makefile
-@@ -21,7 +21,7 @@ obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o cor
- obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
- obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
- obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o
--obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-+obj-$(CONFIG_MACH_TOSA)		+= tosa.o tosa_power.o
- obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
- 
- ifeq ($(CONFIG_MACH_ZYLONITE),y)
-diff --git a/arch/arm/mach-pxa/tosa_power.c b/arch/arm/mach-pxa/tosa_power.c
-new file mode 100644
-index 0000000..61ca7dc
---- /dev/null
-+++ b/arch/arm/mach-pxa/tosa_power.c
-@@ -0,0 +1,82 @@
-+/*
-+ * Battery and Power Management code for the Sharp SL-6000x
-+ *
-+ * Copyright (c) 2005 Dirk Opfer
-+ * Copyright (c) 2008 Dmitry Baryshkov
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/power_supply.h>
-+#include <linux/pda_power.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/arch/tosa.h>
-+#include <asm/gpio.h>
-+
-+static int tosa_power_ac_online(void)
-+{
-+	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
-+}
-+
-+static char *tosa_ac_supplied_to[] = {
-+	"main-battery",
-+	"backup-battery",
-+	"jacket-battery",
-+};
-+
-+static struct pda_power_pdata tosa_power_data = {
-+	.is_ac_online		= tosa_power_ac_online,
-+	.supplied_to		= tosa_ac_supplied_to,
-+	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
-+};
-+
-+static struct resource tosa_power_resource[] = {
-+	{
-+		.name		= "ac",
-+		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
-+		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
-+		.flags		= IORESOURCE_IRQ |
-+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-+	},
-+};
-+
-+static struct platform_device tosa_power_device = {
-+	.name			= "pda-power",
-+	.id			= -1,
-+	.dev.platform_data	= &tosa_power_data,
-+	.resource		= tosa_power_resource,
-+	.num_resources		= ARRAY_SIZE(tosa_power_resource),
-+};
-+
-+static int __init tosa_power_init(void)
-+{
-+	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac");
-+	if (ret)
-+		goto err_gpio_req;
-+
-+	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
-+	if (ret)
-+		goto err_gpio_in;
-+
-+	return platform_device_register(&tosa_power_device);
-+
-+err_gpio_in:
-+	gpio_free(TOSA_GPIO_AC_IN);
-+err_gpio_req:
-+	return ret;
-+}
-+
-+static void __exit tosa_power_exit(void)
-+{
-+	platform_device_unregister(&tosa_power_device);
-+	gpio_free(TOSA_GPIO_AC_IN);
-+}
-+
-+module_init(tosa_power_init);
-+module_exit(tosa_power_exit);
-diff --git a/drivers/leds/leds-tosa.c b/drivers/leds/leds-tosa.c
-index fb2416a..b4498b5 100644
---- a/drivers/leds/leds-tosa.c
-+++ b/drivers/leds/leds-tosa.c
-@@ -46,7 +46,7 @@ static void tosaled_green_set(struct led_classdev *led_cdev,
- 
- static struct led_classdev tosa_amber_led = {
- 	.name			= "tosa:amber",
--	.default_trigger	= "sharpsl-charge",
-+	.default_trigger	= "main-battery-charging",
- 	.brightness_set		= tosaled_amber_set,
- };
- 
-diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
-index 58c806e..e3a9c37 100644
---- a/drivers/power/Kconfig
-+++ b/drivers/power/Kconfig
-@@ -49,4 +49,11 @@ config BATTERY_OLPC
- 	help
- 	  Say Y to enable support for the battery on the OLPC laptop.
- 
-+config BATTERY_TOSA
-+	tristate "Sharp SL-6000 (tosa) battery"
-+	depends on MACH_TOSA && MFD_TC6393XB
-+	help
-+	  Say Y to enable support for the battery on the Sharp Zaurus
-+	  SL-6000 (tosa) models.
-+
- endif # POWER_SUPPLY
-diff --git a/drivers/power/Makefile b/drivers/power/Makefile
-index 6413ded..1e408fa 100644
---- a/drivers/power/Makefile
-+++ b/drivers/power/Makefile
-@@ -20,3 +20,4 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
- obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
- obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
- obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
-+obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
-diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
-new file mode 100644
-index 0000000..b0fd2f2
---- /dev/null
-+++ b/drivers/power/tosa_battery.c
-@@ -0,0 +1,458 @@
-+/*
-+ * Battery and Power Management code for the Sharp SL-6000x
-+ *
-+ * Copyright (c) 2005 Dirk Opfer
-+ * Copyright (c) 2008 Dmitry Baryshkov
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/power_supply.h>
-+#include <linux/wm97xx.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/gpio.h>
-+#include <asm/arch/tosa.h>
-+
-+#define BAT_TO_VOLTS(v)		((v) * 1000000 / 414)
-+#define BU_TO_VOLTS(v)		((v) * 1000000 / 1266)
-+/*
-+ * It's pretty strange value, but that's roughly what I get from
-+ * zaurus maintainer menu
-+ */
-+//#define BAT_TO_TEMP(t)		((t) * 10000/2000)
-+#define BAT_TO_TEMP(t)			(t)
-+
-+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
-+static struct work_struct bat_work;
-+
-+struct tosa_bat {
-+	int status;
-+	struct power_supply psy;
-+	int full_chrg;
-+
-+	struct mutex work_lock; /* protects data */
-+	bool (*is_present)(struct tosa_bat *bat);
-+	int gpio_full;
-+	int gpio_charge_off;
-+	int gpio_bat;
-+	int adc_bat;
-+	int gpio_temp;
-+	int adc_temp;
-+};
-+
-+static struct tosa_bat tosa_bat_main;
-+static struct tosa_bat tosa_bat_jacket;
-+
-+static enum power_supply_property tosa_bat_main_props[] = {
-+	POWER_SUPPLY_PROP_STATUS,
-+	POWER_SUPPLY_PROP_TECHNOLOGY,
-+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
-+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-+	POWER_SUPPLY_PROP_TEMP,
-+	POWER_SUPPLY_PROP_PRESENT,
-+};
-+
-+static enum power_supply_property tosa_bat_bu_props[] = {
-+	POWER_SUPPLY_PROP_STATUS,
-+	POWER_SUPPLY_PROP_TECHNOLOGY,
-+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-+	POWER_SUPPLY_PROP_PRESENT,
-+};
-+
-+static unsigned long tosa_read_bat(struct tosa_bat *bat)
-+{
-+	unsigned long value = 0;
-+
-+	if (bat->gpio_bat < 0 || bat->adc_bat < 0)
-+		return 0;
-+
-+	mutex_lock(&bat_lock);
-+	gpio_set_value(bat->gpio_bat, 1);
-+	mdelay(5);
-+	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, bat->adc_bat);
-+	gpio_set_value(bat->gpio_bat, 0);
-+	mutex_unlock(&bat_lock);
-+	return value;
-+}
-+
-+static unsigned long tosa_read_temp(struct tosa_bat *bat)
-+{
-+	unsigned long value = 0;
-+
-+	if (bat->gpio_temp < 0 || bat->adc_temp < 0)
-+		return 0;
-+
-+	mutex_lock(&bat_lock);
-+	gpio_set_value(bat->gpio_temp, 1);
-+	mdelay(5);
-+	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, bat->adc_temp);
-+	gpio_set_value(bat->gpio_temp, 0);
-+	mutex_unlock(&bat_lock);
-+	return value;
-+}
-+
-+static int tosa_bat_get_property(struct power_supply *psy,
-+			    enum power_supply_property psp,
-+			    union power_supply_propval *val)
-+{
-+	int ret = 0;
-+	struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
-+
-+	if (bat->is_present && !bat->is_present(bat)
-+			&& psp != POWER_SUPPLY_PROP_PRESENT) {
-+		return -ENODEV;
-+	}
-+
-+	switch (psp) {
-+	case POWER_SUPPLY_PROP_STATUS:
-+		val->intval = bat->status;
-+		break;
-+	case POWER_SUPPLY_PROP_TECHNOLOGY:
-+		val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
-+		break;
-+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-+		val->intval = BAT_TO_VOLTS(tosa_read_bat(bat));
-+		break;
-+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
-+		if (bat->full_chrg == -1)
-+			val->intval = -1;
-+		else
-+			val->intval = BAT_TO_VOLTS(bat->full_chrg);
-+		break;
-+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-+		val->intval = BAT_TO_VOLTS(1551);
-+		break;
-+	case POWER_SUPPLY_PROP_TEMP:
-+		val->intval = BAT_TO_TEMP(tosa_read_temp(bat));
-+		break;
-+	case POWER_SUPPLY_PROP_PRESENT:
-+		val->intval = bat->is_present ? bat->is_present(bat) : 1;
-+		break;
-+	default:
-+		ret = -EINVAL;
-+		break;
-+	}
-+	return ret;
-+}
-+
-+static int tosa_bu_get_property(struct power_supply *psy,
-+			    enum power_supply_property psp,
-+			    union power_supply_propval *val)
-+{
-+	int ret = 0;
-+	struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
-+
-+	switch (psp) {
-+	case POWER_SUPPLY_PROP_STATUS:
-+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
-+		break;
-+	case POWER_SUPPLY_PROP_TECHNOLOGY:
-+		val->intval = POWER_SUPPLY_TECHNOLOGY_LiMn;
-+		break;
-+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-+		val->intval = 0;
-+		break;
-+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-+		val->intval = 3 * 1000000; /* 3 V */
-+		break;
-+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-+		/* I think so */
-+		val->intval = BU_TO_VOLTS(tosa_read_bat(bat));
-+		break;
-+	case POWER_SUPPLY_PROP_PRESENT:
-+		val->intval = 1;
-+		break;
-+	default:
-+		ret = -EINVAL;
-+		break;
-+	}
-+	return ret;
-+}
-+
-+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) {
-+	// FIXME
-+	return 1;
-+}
-+
-+static void tosa_bat_external_power_changed(struct power_supply *psy)
-+{
-+	schedule_work(&bat_work);
-+}
-+
-+static irqreturn_t tosa_bat_full_isr(int irq, void *data)
-+{
-+	printk(KERN_ERR "bat_full irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
-+	schedule_work(&bat_work);
-+	return IRQ_HANDLED;
-+}
-+
-+static void tosa_bat_update(struct tosa_bat *bat)
-+{
-+	int old = bat->status;
-+	struct power_supply *psy = &bat->psy;
-+
-+	mutex_lock(&bat->work_lock);
-+
-+	if (bat->is_present && !bat->is_present(bat)) {
-+		printk(KERN_DEBUG "%s not present\n", psy->name);
-+		bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
-+		bat->full_chrg = -1;
-+	} else if (power_supply_am_i_supplied(psy)) {
-+		if (gpio_get_value(bat->gpio_full)) {
-+			printk(KERN_DEBUG "%s full\n", psy->name);
-+
-+			if (old == POWER_SUPPLY_STATUS_CHARGING || bat->full_chrg == -1)
-+				bat->full_chrg = tosa_read_bat(bat);
-+
-+			gpio_set_value(bat->gpio_charge_off, 1);
-+			bat->status = POWER_SUPPLY_STATUS_FULL;
-+		} else {
-+			printk(KERN_ERR "%s charge\n", psy->name);
-+			gpio_set_value(bat->gpio_charge_off, 0);
-+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
-+		}
-+	} else {
-+		printk(KERN_ERR "%s discharge\n", psy->name);
-+		gpio_set_value(bat->gpio_charge_off, 1);
-+		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
-+	}
-+
-+	if (old != bat->status)
-+		power_supply_changed(psy);
-+
-+	mutex_unlock(&bat->work_lock);
-+}
-+
-+static void tosa_bat_work(struct work_struct *work)
-+{
-+	tosa_bat_update(&tosa_bat_main);
-+	tosa_bat_update(&tosa_bat_jacket);
-+}
-+
-+
-+static struct tosa_bat tosa_bat_main = {
-+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
-+	.full_chrg = -1,
-+	.psy = {
-+		.name		= "main-battery",
-+		.type		= POWER_SUPPLY_TYPE_BATTERY,
-+		.properties	= tosa_bat_main_props,
-+		.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
-+		.get_property	= tosa_bat_get_property,
-+		.external_power_changed = tosa_bat_external_power_changed,
-+		.use_for_apm	= 1,
-+	},
-+
-+	.gpio_full = TOSA_GPIO_BAT0_CRG,
-+	.gpio_charge_off = TOSA_TC6393XB_CHARGE_OFF,
-+	.gpio_bat = TOSA_TC6393XB_BAT0_V_ON,
-+	.adc_bat = WM97XX_AUX_ID3,
-+	.gpio_temp = TOSA_TC6393XB_BAT1_TH_ON,
-+	.adc_temp = WM97XX_AUX_ID2,
-+};
-+
-+static struct tosa_bat tosa_bat_jacket = {
-+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
-+	.full_chrg = -1,
-+	.psy = {
-+		.name		= "jacket-battery",
-+		.type		= POWER_SUPPLY_TYPE_BATTERY,
-+		.properties	= tosa_bat_main_props,
-+		.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
-+		.get_property	= tosa_bat_get_property,
-+		.external_power_changed = tosa_bat_external_power_changed,
-+//		.use_for_apm	= 1,
-+	},
-+
-+	.is_present = tosa_jacket_bat_is_present,
-+	.gpio_full = TOSA_GPIO_BAT1_CRG,
-+	.gpio_charge_off = TOSA_TC6393XB_CHARGE_OFF_JC,
-+	.gpio_bat = TOSA_TC6393XB_BAT1_V_ON,
-+	.adc_bat = WM97XX_AUX_ID3,
-+	.gpio_temp = TOSA_TC6393XB_BAT0_TH_ON,
-+	.adc_temp = WM97XX_AUX_ID2,
-+};
-+
-+static struct tosa_bat tosa_bat_bu = {
-+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
-+	.full_chrg = -1,
-+
-+	.psy = {
-+		.name		= "backup-battery",
-+		.type		= POWER_SUPPLY_TYPE_BATTERY,
-+		.properties	= tosa_bat_bu_props,
-+		.num_properties	= ARRAY_SIZE(tosa_bat_bu_props),
-+		.get_property	= tosa_bu_get_property,
-+		.external_power_changed = tosa_bat_external_power_changed,
-+	},
-+
-+	.gpio_full = -1,
-+	.gpio_charge_off = -1,
-+	.gpio_bat = TOSA_TC6393XB_BU_CHRG_ON,
-+	.adc_bat = WM97XX_AUX_ID4,
-+	.gpio_temp = -1,
-+	.adc_temp = -1,
-+};
-+
-+static struct {
-+	int gpio;
-+	char *name;
-+	bool output;
-+	int value;
-+} gpios[] = {
-+	{ TOSA_TC6393XB_CHARGE_OFF,	"main charge off",	1, 1 },
-+	{ TOSA_TC6393XB_CHARGE_OFF_JC,	"jacket charge off",	1, 1 },
-+	{ TOSA_TC6393XB_BAT_SW_ON,	"battery switch",	1, 0 },
-+	{ TOSA_TC6393XB_BAT0_V_ON,	"main battery",		1, 0 },
-+	{ TOSA_TC6393XB_BAT1_V_ON,	"jacket battery",	1, 0 },
-+	{ TOSA_TC6393XB_BAT1_TH_ON,	"main battery temp",	1, 0 },
-+	{ TOSA_TC6393XB_BAT0_TH_ON,	"jacket battery temp",	1, 0 },
-+	{ TOSA_TC6393XB_BU_CHRG_ON,	"backup battery",	1, 0 },
-+	{ TOSA_GPIO_BAT0_CRG,		"main battery full",	0, 0 },
-+	{ TOSA_GPIO_BAT1_CRG,		"jacket battery full",	0, 0 },
-+	{ TOSA_GPIO_BAT0_LOW,		"main battery low",	0, 0 },
-+	{ TOSA_GPIO_BAT1_LOW,		"jacket battery low",	0, 0 },
-+};
-+
-+#ifdef CONFIG_PM
-+static int tosa_bat_suspend(struct device *dev, pm_message_t state)
-+{
-+	/* do nothing */
-+	return 0;
-+}
-+
-+static int tosa_bat_resume(struct device *dev)
-+{
-+	schedule_work(&bat_work);
-+	return 0;
-+}
-+#else
-+#define tosa_bat_suspend NULL
-+#define tosa_bat_resume NULL
-+#endif
-+
-+static int __devinit tosa_bat_probe(struct device *dev)
-+{
-+	int ret;
-+	int i;
-+
-+	if (!machine_is_tosa())
-+		return -ENODEV;
-+
-+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
-+		ret = gpio_request(gpios[i].gpio, gpios[i].name);
-+		if (ret) {
-+			i --;
-+			goto err_gpio;
-+		}
-+
-+		if (gpios[i].output)
-+			ret = gpio_direction_output(gpios[i].gpio,
-+					gpios[i].value);
-+		else
-+			ret = gpio_direction_input(gpios[i].gpio);
-+
-+		if (ret)
-+			goto err_gpio;
-+	}
-+
-+	mutex_init(&tosa_bat_main.work_lock);
-+	mutex_init(&tosa_bat_jacket.work_lock);
-+
-+	INIT_WORK(&bat_work, tosa_bat_work);
-+
-+	ret = power_supply_register(dev, &tosa_bat_main.psy);
-+	if (ret)
-+		goto err_psy_reg_main;
-+	ret = power_supply_register(dev, &tosa_bat_jacket.psy);
-+	if (ret)
-+		goto err_psy_reg_jacket;
-+	ret = power_supply_register(dev, &tosa_bat_bu.psy);
-+	if (ret)
-+		goto err_psy_reg_bu;
-+
-+	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
-+				tosa_bat_full_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-+				"main full", &tosa_bat_main);
-+	if (ret)
-+		goto err_req_main;
-+
-+	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
-+				tosa_bat_full_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-+				"jacket full", &tosa_bat_jacket);
-+	if (!ret) {
-+		schedule_work(&bat_work);
-+		return 0;
-+	}
-+
-+	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
-+err_req_main:
-+	power_supply_unregister(&tosa_bat_bu.psy);
-+err_psy_reg_bu:
-+	power_supply_unregister(&tosa_bat_jacket.psy);
-+err_psy_reg_jacket:
-+	power_supply_unregister(&tosa_bat_main.psy);
-+err_psy_reg_main:
-+
-+	i --;
-+err_gpio:
-+	for (; i >= 0; i --)
-+		gpio_free(gpios[i].gpio);
-+
-+	return ret;
-+}
-+
-+static int __devexit tosa_bat_remove(struct device *dev)
-+{
-+	int i;
-+
-+	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
-+	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
-+
-+	power_supply_unregister(&tosa_bat_bu.psy);
-+	power_supply_unregister(&tosa_bat_jacket.psy);
-+	power_supply_unregister(&tosa_bat_main.psy);
-+
-+	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i --)
-+		gpio_free(gpios[i].gpio);
-+
-+	return 0;
-+}
-+
-+static struct device_driver tosa_bat_driver = {
-+	.name		= "wm97xx-battery",
-+	.bus		= &wm97xx_bus_type,
-+	.owner		= THIS_MODULE,
-+	.probe		= tosa_bat_probe,
-+	.remove		= __devexit_p(tosa_bat_remove),
-+	.suspend	= tosa_bat_suspend,
-+	.resume		= tosa_bat_resume,
-+};
-+
-+static int __init tosa_bat_init(void)
-+{
-+	return driver_register(&tosa_bat_driver);
-+}
-+
-+static void __exit tosa_bat_exit(void)
-+{
-+	driver_unregister(&tosa_bat_driver);
-+}
-+
-+module_init(tosa_bat_init);
-+module_exit(tosa_bat_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Dmitry Baryshkov");
-+MODULE_DESCRIPTION("Tosa battery driver");
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0061-tosa-bat-unify.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0061-tosa-bat-unify.patch
deleted file mode 100644
index 2bcede36a9..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0061-tosa-bat-unify.patch
+++ /dev/null
@@ -1,342 +0,0 @@
-From f05aa38af5bd5962ae04c4b128644e7f55451527 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Fri, 8 Feb 2008 01:14:48 +0300
-Subject: [PATCH 61/64] tosa-bat-unify
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/power/tosa_battery.c |  161 ++++++++++++++++++++---------------------
- 1 files changed, 79 insertions(+), 82 deletions(-)
-
-diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
-index b0fd2f2..008e791 100644
---- a/drivers/power/tosa_battery.c
-+++ b/drivers/power/tosa_battery.c
-@@ -21,15 +21,6 @@
- #include <asm/gpio.h>
- #include <asm/arch/tosa.h>
- 
--#define BAT_TO_VOLTS(v)		((v) * 1000000 / 414)
--#define BU_TO_VOLTS(v)		((v) * 1000000 / 1266)
--/*
-- * It's pretty strange value, but that's roughly what I get from
-- * zaurus maintainer menu
-- */
--//#define BAT_TO_TEMP(t)		((t) * 10000/2000)
--#define BAT_TO_TEMP(t)			(t)
--
- static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
- static struct work_struct bat_work;
- 
-@@ -39,37 +30,27 @@ struct tosa_bat {
- 	int full_chrg;
- 
- 	struct mutex work_lock; /* protects data */
-+
- 	bool (*is_present)(struct tosa_bat *bat);
- 	int gpio_full;
- 	int gpio_charge_off;
-+
-+	int technology;
-+
- 	int gpio_bat;
- 	int adc_bat;
-+	int adc_bat_divider;
-+	int bat_max;
-+	int bat_min;
-+
- 	int gpio_temp;
- 	int adc_temp;
-+	int adc_temp_divider;
- };
- 
- static struct tosa_bat tosa_bat_main;
- static struct tosa_bat tosa_bat_jacket;
- 
--static enum power_supply_property tosa_bat_main_props[] = {
--	POWER_SUPPLY_PROP_STATUS,
--	POWER_SUPPLY_PROP_TECHNOLOGY,
--	POWER_SUPPLY_PROP_VOLTAGE_NOW,
--	POWER_SUPPLY_PROP_VOLTAGE_MAX,
--	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
--	POWER_SUPPLY_PROP_TEMP,
--	POWER_SUPPLY_PROP_PRESENT,
--};
--
--static enum power_supply_property tosa_bat_bu_props[] = {
--	POWER_SUPPLY_PROP_STATUS,
--	POWER_SUPPLY_PROP_TECHNOLOGY,
--	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
--	POWER_SUPPLY_PROP_VOLTAGE_NOW,
--	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
--	POWER_SUPPLY_PROP_PRESENT,
--};
--
- static unsigned long tosa_read_bat(struct tosa_bat *bat)
- {
- 	unsigned long value = 0;
-@@ -83,6 +64,9 @@ static unsigned long tosa_read_bat(struct tosa_bat *bat)
- 	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, bat->adc_bat);
- 	gpio_set_value(bat->gpio_bat, 0);
- 	mutex_unlock(&bat_lock);
-+
-+	value = value * 1000000 / bat->adc_bat_divider;
-+
- 	return value;
- }
- 
-@@ -99,6 +83,9 @@ static unsigned long tosa_read_temp(struct tosa_bat *bat)
- 	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, bat->adc_temp);
- 	gpio_set_value(bat->gpio_temp, 0);
- 	mutex_unlock(&bat_lock);
-+
-+	value = value * 10000 / bat->adc_temp_divider;
-+
- 	return value;
- }
- 
-@@ -119,22 +106,25 @@ static int tosa_bat_get_property(struct power_supply *psy,
- 		val->intval = bat->status;
- 		break;
- 	case POWER_SUPPLY_PROP_TECHNOLOGY:
--		val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
-+		val->intval = bat->technology;
- 		break;
- 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
--		val->intval = BAT_TO_VOLTS(tosa_read_bat(bat));
-+		val->intval = tosa_read_bat(bat);
- 		break;
- 	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
- 		if (bat->full_chrg == -1)
--			val->intval = -1;
-+			val->intval = bat->bat_max;
- 		else
--			val->intval = BAT_TO_VOLTS(bat->full_chrg);
-+			val->intval = bat->full_chrg;
-+		break;
-+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-+		val->intval = bat->bat_max;
- 		break;
- 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
--		val->intval = BAT_TO_VOLTS(1551);
-+		val->intval = bat->bat_min;
- 		break;
- 	case POWER_SUPPLY_PROP_TEMP:
--		val->intval = BAT_TO_TEMP(tosa_read_temp(bat));
-+		val->intval = tosa_read_temp(bat);
- 		break;
- 	case POWER_SUPPLY_PROP_PRESENT:
- 		val->intval = bat->is_present ? bat->is_present(bat) : 1;
-@@ -146,40 +136,6 @@ static int tosa_bat_get_property(struct power_supply *psy,
- 	return ret;
- }
- 
--static int tosa_bu_get_property(struct power_supply *psy,
--			    enum power_supply_property psp,
--			    union power_supply_propval *val)
--{
--	int ret = 0;
--	struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
--
--	switch (psp) {
--	case POWER_SUPPLY_PROP_STATUS:
--		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
--		break;
--	case POWER_SUPPLY_PROP_TECHNOLOGY:
--		val->intval = POWER_SUPPLY_TECHNOLOGY_LiMn;
--		break;
--	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
--		val->intval = 0;
--		break;
--	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
--		val->intval = 3 * 1000000; /* 3 V */
--		break;
--	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
--		/* I think so */
--		val->intval = BU_TO_VOLTS(tosa_read_bat(bat));
--		break;
--	case POWER_SUPPLY_PROP_PRESENT:
--		val->intval = 1;
--		break;
--	default:
--		ret = -EINVAL;
--		break;
--	}
--	return ret;
--}
--
- static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) {
- 	// FIXME
- 	return 1;
-@@ -241,6 +197,25 @@ static void tosa_bat_work(struct work_struct *work)
- }
- 
- 
-+static enum power_supply_property tosa_bat_main_props[] = {
-+	POWER_SUPPLY_PROP_STATUS,
-+	POWER_SUPPLY_PROP_TECHNOLOGY,
-+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
-+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-+	POWER_SUPPLY_PROP_TEMP,
-+	POWER_SUPPLY_PROP_PRESENT,
-+};
-+
-+static enum power_supply_property tosa_bat_bu_props[] = {
-+	POWER_SUPPLY_PROP_STATUS,
-+	POWER_SUPPLY_PROP_TECHNOLOGY,
-+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-+	POWER_SUPPLY_PROP_PRESENT,
-+};
-+
- static struct tosa_bat tosa_bat_main = {
- 	.status = POWER_SUPPLY_STATUS_UNKNOWN,
- 	.full_chrg = -1,
-@@ -256,10 +231,18 @@ static struct tosa_bat tosa_bat_main = {
- 
- 	.gpio_full = TOSA_GPIO_BAT0_CRG,
- 	.gpio_charge_off = TOSA_TC6393XB_CHARGE_OFF,
-+
-+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-+
- 	.gpio_bat = TOSA_TC6393XB_BAT0_V_ON,
- 	.adc_bat = WM97XX_AUX_ID3,
-+	.adc_bat_divider = 414,
-+	.bat_max = 4310000,
-+	.bat_min = 1551 * 100000 / 414,
-+
- 	.gpio_temp = TOSA_TC6393XB_BAT1_TH_ON,
- 	.adc_temp = WM97XX_AUX_ID2,
-+	.adc_temp_divider = 10000,
- };
- 
- static struct tosa_bat tosa_bat_jacket = {
-@@ -278,10 +261,18 @@ static struct tosa_bat tosa_bat_jacket = {
- 	.is_present = tosa_jacket_bat_is_present,
- 	.gpio_full = TOSA_GPIO_BAT1_CRG,
- 	.gpio_charge_off = TOSA_TC6393XB_CHARGE_OFF_JC,
-+
-+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-+
- 	.gpio_bat = TOSA_TC6393XB_BAT1_V_ON,
- 	.adc_bat = WM97XX_AUX_ID3,
-+	.adc_bat_divider = 414,
-+	.bat_max = 4310000,
-+	.bat_min = 1551 * 100000 / 414,
-+
- 	.gpio_temp = TOSA_TC6393XB_BAT0_TH_ON,
- 	.adc_temp = WM97XX_AUX_ID2,
-+	.adc_temp_divider = 10000,
- };
- 
- static struct tosa_bat tosa_bat_bu = {
-@@ -293,16 +284,22 @@ static struct tosa_bat tosa_bat_bu = {
- 		.type		= POWER_SUPPLY_TYPE_BATTERY,
- 		.properties	= tosa_bat_bu_props,
- 		.num_properties	= ARRAY_SIZE(tosa_bat_bu_props),
--		.get_property	= tosa_bu_get_property,
-+		.get_property	= tosa_bat_get_property,
- 		.external_power_changed = tosa_bat_external_power_changed,
- 	},
- 
- 	.gpio_full = -1,
- 	.gpio_charge_off = -1,
-+
-+	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
-+
- 	.gpio_bat = TOSA_TC6393XB_BU_CHRG_ON,
- 	.adc_bat = WM97XX_AUX_ID4,
-+	.adc_bat_divider = 1266,
-+
- 	.gpio_temp = -1,
- 	.adc_temp = -1,
-+	.adc_temp_divider = -1,
- };
- 
- static struct {
-@@ -326,13 +323,14 @@ static struct {
- };
- 
- #ifdef CONFIG_PM
--static int tosa_bat_suspend(struct device *dev, pm_message_t state)
-+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
- {
- 	/* do nothing */
-+	flush_scheduled_work();
- 	return 0;
- }
- 
--static int tosa_bat_resume(struct device *dev)
-+static int tosa_bat_resume(struct platform_device *dev)
- {
- 	schedule_work(&bat_work);
- 	return 0;
-@@ -342,7 +340,7 @@ static int tosa_bat_resume(struct device *dev)
- #define tosa_bat_resume NULL
- #endif
- 
--static int __devinit tosa_bat_probe(struct device *dev)
-+static int __devinit tosa_bat_probe(struct platform_device *dev)
- {
- 	int ret;
- 	int i;
-@@ -372,13 +370,13 @@ static int __devinit tosa_bat_probe(struct device *dev)
- 
- 	INIT_WORK(&bat_work, tosa_bat_work);
- 
--	ret = power_supply_register(dev, &tosa_bat_main.psy);
-+	ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
- 	if (ret)
- 		goto err_psy_reg_main;
--	ret = power_supply_register(dev, &tosa_bat_jacket.psy);
-+	ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
- 	if (ret)
- 		goto err_psy_reg_jacket;
--	ret = power_supply_register(dev, &tosa_bat_bu.psy);
-+	ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
- 	if (ret)
- 		goto err_psy_reg_bu;
- 
-@@ -413,7 +411,7 @@ err_gpio:
- 	return ret;
- }
- 
--static int __devexit tosa_bat_remove(struct device *dev)
-+static int __devexit tosa_bat_remove(struct platform_device *dev)
- {
- 	int i;
- 
-@@ -430,10 +428,9 @@ static int __devexit tosa_bat_remove(struct device *dev)
- 	return 0;
- }
- 
--static struct device_driver tosa_bat_driver = {
--	.name		= "wm97xx-battery",
--	.bus		= &wm97xx_bus_type,
--	.owner		= THIS_MODULE,
-+static struct platform_driver tosa_bat_driver = {
-+	.driver.name	= "wm97xx-battery",
-+	.driver.owner	= THIS_MODULE,
- 	.probe		= tosa_bat_probe,
- 	.remove		= __devexit_p(tosa_bat_remove),
- 	.suspend	= tosa_bat_suspend,
-@@ -442,12 +439,12 @@ static struct device_driver tosa_bat_driver = {
- 
- static int __init tosa_bat_init(void)
- {
--	return driver_register(&tosa_bat_driver);
-+	return platform_driver_register(&tosa_bat_driver);
- }
- 
- static void __exit tosa_bat_exit(void)
- {
--	driver_unregister(&tosa_bat_driver);
-+	platform_driver_unregister(&tosa_bat_driver);
- }
- 
- module_init(tosa_bat_init);
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0062-tosa-bat-fix-charging.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0062-tosa-bat-fix-charging.patch
deleted file mode 100644
index e3a6b74772..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0062-tosa-bat-fix-charging.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 0b9f80ab540b2e51f6e86f6a1adec67761f9368d Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Fri, 8 Feb 2008 00:50:03 +0300
-Subject: [PATCH 62/64] tosa-bat-fix-charging
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/power/tosa_battery.c |   28 +++++++++++++++++++++-------
- 1 files changed, 21 insertions(+), 7 deletions(-)
-
-diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
-index 008e791..2db9116 100644
---- a/drivers/power/tosa_battery.c
-+++ b/drivers/power/tosa_battery.c
-@@ -153,39 +153,53 @@ static irqreturn_t tosa_bat_full_isr(int irq, void *data)
- 	return IRQ_HANDLED;
- }
- 
-+static char *status_text[] = {
-+	[POWER_SUPPLY_STATUS_UNKNOWN] =		"Unknown",
-+	[POWER_SUPPLY_STATUS_CHARGING] =	"Charging",
-+	[POWER_SUPPLY_STATUS_DISCHARGING] =	"Discharging",
-+	[POWER_SUPPLY_STATUS_NOT_CHARGING] =	"Not charging",
-+	[POWER_SUPPLY_STATUS_FULL] =		"Full",
-+};
-+
- static void tosa_bat_update(struct tosa_bat *bat)
- {
--	int old = bat->status;
-+	int old;
- 	struct power_supply *psy = &bat->psy;
- 
- 	mutex_lock(&bat->work_lock);
- 
-+	old = bat->status;
-+
- 	if (bat->is_present && !bat->is_present(bat)) {
--		printk(KERN_DEBUG "%s not present\n", psy->name);
-+		printk(KERN_NOTICE "%s not present\n", psy->name);
- 		bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
- 		bat->full_chrg = -1;
- 	} else if (power_supply_am_i_supplied(psy)) {
-+		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
-+			gpio_set_value(bat->gpio_charge_off, 0);
-+			mdelay(15);
-+		}
- 		if (gpio_get_value(bat->gpio_full)) {
--			printk(KERN_DEBUG "%s full\n", psy->name);
--
- 			if (old == POWER_SUPPLY_STATUS_CHARGING || bat->full_chrg == -1)
- 				bat->full_chrg = tosa_read_bat(bat);
- 
- 			gpio_set_value(bat->gpio_charge_off, 1);
- 			bat->status = POWER_SUPPLY_STATUS_FULL;
- 		} else {
--			printk(KERN_ERR "%s charge\n", psy->name);
- 			gpio_set_value(bat->gpio_charge_off, 0);
- 			bat->status = POWER_SUPPLY_STATUS_CHARGING;
- 		}
- 	} else {
--		printk(KERN_ERR "%s discharge\n", psy->name);
- 		gpio_set_value(bat->gpio_charge_off, 1);
- 		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
- 	}
- 
--	if (old != bat->status)
-+	if (old != bat->status) {
-+		printk(KERN_NOTICE "%s %s -> %s\n", psy->name,
-+				status_text[old],
-+				status_text[bat->status]);
- 		power_supply_changed(psy);
-+	}
- 
- 	mutex_unlock(&bat->work_lock);
- }
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0063-patch-tosa-bat-jacket-detect.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0063-patch-tosa-bat-jacket-detect.patch
deleted file mode 100644
index 416cae44ec..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0063-patch-tosa-bat-jacket-detect.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 4ef7289137132959e3db5a1e77580ff9db185d90 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Fri, 8 Feb 2008 01:13:54 +0300
-Subject: [PATCH 63/64] patch tosa-bat-jacket-detect
-
----
- drivers/power/tosa_battery.c |   21 +++++++++++++++------
- 1 files changed, 15 insertions(+), 6 deletions(-)
-
-diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
-index 2db9116..70beed2 100644
---- a/drivers/power/tosa_battery.c
-+++ b/drivers/power/tosa_battery.c
-@@ -137,8 +137,7 @@ static int tosa_bat_get_property(struct power_supply *psy,
- }
- 
- static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) {
--	// FIXME
--	return 1;
-+	return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
- }
- 
- static void tosa_bat_external_power_changed(struct power_supply *psy)
-@@ -146,9 +145,9 @@ static void tosa_bat_external_power_changed(struct power_supply *psy)
- 	schedule_work(&bat_work);
- }
- 
--static irqreturn_t tosa_bat_full_isr(int irq, void *data)
-+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
- {
--	printk(KERN_ERR "bat_full irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
-+	printk(KERN_ERR "bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
- 	schedule_work(&bat_work);
- 	return IRQ_HANDLED;
- }
-@@ -334,6 +333,7 @@ static struct {
- 	{ TOSA_GPIO_BAT1_CRG,		"jacket battery full",	0, 0 },
- 	{ TOSA_GPIO_BAT0_LOW,		"main battery low",	0, 0 },
- 	{ TOSA_GPIO_BAT1_LOW,		"jacket battery low",	0, 0 },
-+	{ TOSA_GPIO_JACKET_DETECT,	"jacket detect",	0, 0 },
- };
- 
- #ifdef CONFIG_PM
-@@ -395,19 +395,27 @@ static int __devinit tosa_bat_probe(struct platform_device *dev)
- 		goto err_psy_reg_bu;
- 
- 	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
--				tosa_bat_full_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-+				tosa_bat_gpio_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- 				"main full", &tosa_bat_main);
- 	if (ret)
- 		goto err_req_main;
- 
- 	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
--				tosa_bat_full_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-+				tosa_bat_gpio_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- 				"jacket full", &tosa_bat_jacket);
-+	if (ret)
-+		goto err_req_jacket;
-+
-+	ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
-+				tosa_bat_gpio_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-+				"jacket detect", &tosa_bat_jacket);
- 	if (!ret) {
- 		schedule_work(&bat_work);
- 		return 0;
- 	}
- 
-+	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
-+err_req_jacket:
- 	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
- err_req_main:
- 	power_supply_unregister(&tosa_bat_bu.psy);
-@@ -429,6 +437,7 @@ static int __devexit tosa_bat_remove(struct platform_device *dev)
- {
- 	int i;
- 
-+	free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
- 	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
- 	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
- 
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0064-Export-modes-via-sysfs.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0064-Export-modes-via-sysfs.patch
deleted file mode 100644
index eeb92cfdd5..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0064-Export-modes-via-sysfs.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From feeee5d22c00d9d1e2e06eb5610740be238749b9 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Thu, 7 Feb 2008 22:27:38 +0300
-Subject: [PATCH 64/64] Export modes via sysfs
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/video/tmiofb.c |    3 +++
- 1 files changed, 3 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
-index 6b963a1..9389a77 100644
---- a/drivers/video/tmiofb.c
-+++ b/drivers/video/tmiofb.c
-@@ -800,6 +800,9 @@ static int tmiofb_probe(struct platform_device *dev)
- 	if (retval)
- 		goto err_set_par;*/
- 
-+	fb_videomode_to_modelist(data->modes, data->num_modes,
-+				 &info->modelist);
-+
- 	retval = register_framebuffer(info);
- 	if (retval < 0)
- 		goto err_register_framebuffer;
--- 
-1.5.3.8
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0065-wm97xx-core-fixes.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0065-wm97xx-core-fixes.patch
deleted file mode 100644
index 5db0cc6ba0..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0065-wm97xx-core-fixes.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 2544412fc47dc13f4f3935cb4c2fd500d217e905 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 13 Feb 2008 02:00:15 +0300
-Subject: [PATCH] wm97xx-core fixes
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/input/touchscreen/wm97xx-core.c |    8 ++++----
- include/linux/wm97xx.h                  |    1 -
- 2 files changed, 4 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
-index 840d9ff..4cbb9e5 100644
---- a/drivers/input/touchscreen/wm97xx-core.c
-+++ b/drivers/input/touchscreen/wm97xx-core.c
-@@ -596,7 +596,7 @@ static int wm97xx_probe(struct device *dev)
- 	}
- 	platform_set_drvdata(wm->battery_dev, wm);
- 	wm->battery_dev->dev.parent = dev;
--	ret = platform_device_register(wm->battery_dev);
-+	ret = platform_device_add(wm->battery_dev);
- 	if (ret < 0)
- 		goto batt_reg_err;
- 
-@@ -609,7 +609,7 @@ static int wm97xx_probe(struct device *dev)
- 	}
- 	platform_set_drvdata(wm->touch_dev, wm);
- 	wm->touch_dev->dev.parent = dev;
--	ret = platform_device_register(wm->touch_dev);
-+	ret = platform_device_add(wm->touch_dev);
- 	if (ret < 0)
- 		goto touch_reg_err;
- 
-@@ -619,10 +619,12 @@ static int wm97xx_probe(struct device *dev)
- 	platform_device_put(wm->touch_dev);
-  touch_err:
- 	platform_device_unregister(wm->battery_dev);
-+	wm->battery_dev = NULL;
-  batt_reg_err:
- 	platform_device_put(wm->battery_dev);
-  batt_err:
- 	input_unregister_device(wm->input_dev);
-+	wm->input_dev = NULL;
- 	kfree(wm);
- 	return ret;
- }
--- 
-1.5.4.1
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0066-tmiofb_probe-should-be-__devinit.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0066-tmiofb_probe-should-be-__devinit.patch
deleted file mode 100644
index 42320be50b..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0066-tmiofb_probe-should-be-__devinit.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From b6a63ad546cc26519a342f3fdd7b1def49ca33ee Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 13 Feb 2008 02:00:14 +0300
-Subject: [PATCH] tmiofb_probe should be __devinit
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/video/tmiofb.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
-index 9389a77..958ee8a 100644
---- a/drivers/video/tmiofb.c
-+++ b/drivers/video/tmiofb.c
-@@ -704,7 +704,7 @@ static irqreturn_t tmiofb_irq(int irq, void *__info)
- 	return IRQ_HANDLED;
- }
- 
--static int tmiofb_probe(struct platform_device *dev)
-+static int __devinit tmiofb_probe(struct platform_device *dev)
- {
- 	struct mfd_cell			*cell	= mfd_get_cell(dev);
- 	struct tmio_fb_data		*data	= cell->driver_data;
--- 
-1.5.4.1
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0067-modeswitching.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0067-modeswitching.patch
deleted file mode 100644
index 42b69d9377..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0067-modeswitching.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From aded2e51a7a2113dae6431c858df1d95fb312851 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Wed, 13 Feb 2008 19:34:08 +0300
-Subject: [PATCH] modeswitching
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- arch/arm/mach-pxa/tosa.c          |   33 +++++++++++++++++++++++++++++++-
- drivers/mfd/tc6393xb.c            |    2 +-
- drivers/video/backlight/tosa_bl.c |   38 +++++++++++++++++++++++++++++++++---
- drivers/video/tmiofb.c            |    8 +++---
- include/asm-arm/arch-pxa/tosa.h   |    2 +
- include/linux/mfd/tc6393xb.h      |    2 +-
- include/linux/mfd/tmio.h          |    2 +-
- 7 files changed, 75 insertions(+), 12 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index 94c9915..6631de2 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -455,9 +455,40 @@ static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
- 	}
- };
- 
-+static DEFINE_SPINLOCK(tosa_lcd_mode_lock);
-+
-+static const struct fb_videomode *tosa_lcd_mode = &tosa_tc6393xb_lcd_mode[0];
-+
-+static int tosa_lcd_set_mode(struct platform_device *fb_dev,
-+					const struct fb_videomode *mode)
-+{
-+	int rc;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&tosa_lcd_mode_lock, flags);
-+	rc = tc6393xb_lcd_mode(fb_dev, mode);
-+	if (!rc)
-+		tosa_lcd_mode = mode;
-+	spin_unlock_irqrestore(&tosa_lcd_mode_lock, flags);
-+
-+	return rc;
-+}
-+
-+const struct fb_videomode *tosa_lcd_get_mode(void)
-+{
-+	unsigned long flags;
-+	const struct fb_videomode *mode;
-+
-+	spin_lock_irqsave(&tosa_lcd_mode_lock, flags);
-+	mode = tosa_lcd_mode;
-+	spin_unlock_irqrestore(&tosa_lcd_mode_lock, flags);
-+
-+	return mode;
-+}
-+
- static struct tmio_fb_data tosa_tc6393xb_fb_config = {
- 	.lcd_set_power	= tc6393xb_lcd_set_power,
--	.lcd_mode	= tc6393xb_lcd_mode,
-+	.lcd_mode	= tosa_lcd_set_mode,
- 	.num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
- 	.modes		= &tosa_tc6393xb_lcd_mode[0],
- };
-diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
-index 9001687..21190f3 100644
---- a/drivers/mfd/tc6393xb.c
-+++ b/drivers/mfd/tc6393xb.c
-@@ -196,7 +196,7 @@ int tc6393xb_lcd_set_power(struct platform_device *fb, bool on)
- EXPORT_SYMBOL(tc6393xb_lcd_set_power);
- 
- int tc6393xb_lcd_mode(struct platform_device *fb_dev,
--					struct fb_videomode *mode) {
-+					const struct fb_videomode *mode) {
- 	struct tc6393xb			*tc6393xb =
- 		platform_get_drvdata(to_platform_device(fb_dev->dev.parent));
- 	struct tc6393xb_scr __iomem	*scr	= tc6393xb->scr;
-diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
-index 9ef0bfb..45fc6ae 100644
---- a/drivers/video/backlight/tosa_bl.c
-+++ b/drivers/video/backlight/tosa_bl.c
-@@ -48,6 +48,9 @@ struct tosa_bl_data {
- 	struct ssp_dev		nssp_dev;
- 	struct ssp_state	nssp_state;
- 
-+	/* listen for mode changes */
-+	struct notifier_block	fb_notif;
-+
- 	struct backlight_device	*bl_dev;
- };
- 
-@@ -103,14 +106,19 @@ static void tosa_lcd_tg_init(struct tosa_bl_data *data)
- 	pxa_nssp_output(data, TG_GPOSR,0x02);		/* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */
- }
- 
--static void tosa_lcd_tg_on(struct tosa_bl_data *data/*, const struct fb_videomode *mode*/)
-+static void tosa_lcd_tg_on(struct tosa_bl_data *data)
- {
--	const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR;
-+	const struct fb_videomode *mode = tosa_lcd_get_mode();
-+
-+	int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR;
-+
-+	if (mode->yres == 640)
-+		value |= TG_REG0_VQV;
- 
- 	tosa_lcd_tg_init(data);
- 
--	dev_dbg(&data->bl_dev->dev, "tosa_lcd_on\n");
--	pxa_nssp_output(data, TG_PNLCTL, value | (/*mode->yres == 320 ? 0 : */ TG_REG0_VQV));
-+	dev_dbg(&data->bl_dev->dev, "tosa_lcd_on: %04x (%d)\n", value, mode->yres);
-+	pxa_nssp_output(data, TG_PNLCTL, value);
- 
- 	/* TG LCD pannel power up */
- 	pxa_nssp_output(data, TG_PINICTL,0x4);
-@@ -173,6 +181,20 @@ static struct backlight_ops tosa_bl_ops = {
- 	.update_status		= tosa_bl_update_status,
- };
- 
-+static int fb_notifier_callback(struct notifier_block *self,
-+				unsigned long event, void *_data)
-+{
-+	struct tosa_bl_data *bl_data =
-+		container_of(self, struct tosa_bl_data, fb_notif);
-+
-+	if (event != FB_EVENT_MODE_CHANGE && event != FB_EVENT_MODE_CHANGE_ALL)
-+		return 0;
-+
-+	tosa_bl_update_status(bl_data->bl_dev);
-+
-+	return 0;
-+}
-+
- static int tosa_bl_detect_client(struct i2c_adapter *adapter, int address,
-                         int kind)
- {
-@@ -238,9 +260,15 @@ static int tosa_bl_detect_client(struct i2c_adapter *adapter, int address,
- 	data->bl_dev->props.power = FB_BLANK_UNBLANK;
- 	backlight_update_status(data->bl_dev);
- 
-+	data->fb_notif.notifier_call = fb_notifier_callback;
-+	err = fb_register_client(&data->fb_notif);
-+	if (err)
-+		goto err_fb_register;
- 
- 	return 0;
- 
-+err_fb_register:
-+	backlight_device_unregister(data->bl_dev);
- err_bl_register:
- 	tosa_set_backlight(data, 0);
- 	tosa_lcd_tg_off(data);
-@@ -265,6 +293,8 @@ static int tosa_bl_detach_client(struct i2c_client *client)
- 	int err = 0;
- 	struct tosa_bl_data *data = i2c_get_clientdata(client);
- 
-+	fb_unregister_client(&data->fb_notif);
-+
- 	backlight_device_unregister(data->bl_dev);
- 
- 	tosa_set_backlight(data, 0);
-diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
-index 958ee8a..cc75df9 100644
---- a/drivers/video/tmiofb.c
-+++ b/drivers/video/tmiofb.c
-@@ -618,17 +618,17 @@ static int tmiofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
- 
- static int tmiofb_set_par(struct fb_info *info)
- {
--/*	struct fb_var_screeninfo	*var	= &info->var;
-+	struct fb_var_screeninfo	*var	= &info->var;
- 	struct fb_videomode		*mode;
- 
- 	mode = tmiofb_find_mode(info, var);
- 	if (!mode)
- 		return -EINVAL;
- 
--	if (info->mode == mode)
--		return 0;
-+/*	if (info->mode == mode)
-+		return 0;*/
- 
--	info->mode		= mode; */
-+	info->mode		= mode;
- 	info->fix.line_length	= info->mode->xres * 2;
- 
- 	tmiofb_hw_mode(to_platform_device(info->device));
-diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
-index 410fa9a..624c636 100644
---- a/include/asm-arm/arch-pxa/tosa.h
-+++ b/include/asm-arm/arch-pxa/tosa.h
-@@ -230,4 +230,6 @@ extern struct platform_device tosascoop_device;
- #define TOSA_KEY_MAIL		KEY_MAIL
- #endif
- 
-+const struct fb_videomode *tosa_lcd_get_mode(void);
-+
- #endif /* _ASM_ARCH_TOSA_H_ */
-diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
-index 97c4c7c..8ab9e91 100644
---- a/include/linux/mfd/tc6393xb.h
-+++ b/include/linux/mfd/tc6393xb.h
-@@ -53,7 +53,7 @@ struct tc6393xb_platform_data {
- 
- extern int tc6393xb_lcd_set_power(struct platform_device *fb_dev, bool on);
- extern int tc6393xb_lcd_mode(struct platform_device *fb_dev,
--					struct fb_videomode *mode);
-+					const struct fb_videomode *mode);
- 
- /*
-  * Relative to irq_base
-diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
-index b6d4aac..fe7ff2d 100644
---- a/include/linux/mfd/tmio.h
-+++ b/include/linux/mfd/tmio.h
-@@ -19,7 +19,7 @@ struct tmio_fb_data {
- 	int			(*lcd_set_power)(struct platform_device *fb_dev,
- 								bool on);
- 	int			(*lcd_mode)(struct platform_device *fb_dev,
--						struct fb_videomode *mode);
-+					const struct fb_videomode *mode);
- 	int			num_modes;
- 	struct fb_videomode	*modes;
- };
--- 
-1.5.4.1
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0068-Preliminary-tosa-denoiser.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0068-Preliminary-tosa-denoiser.patch
deleted file mode 100644
index e90e3751c0..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0068-Preliminary-tosa-denoiser.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From f7dad1cd9c1bd3fce5d228e0b644a51baea50cd9 Mon Sep 17 00:00:00 2001
-From: Dmitry Baryshkov <dbaryshkov@gmail.com>
-Date: Fri, 15 Feb 2008 15:35:07 +0300
-Subject: [PATCH] Preliminary tosa denoiser
-
-Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
----
- drivers/input/touchscreen/Kconfig       |   12 ++
- drivers/input/touchscreen/Makefile      |    1 +
- drivers/input/touchscreen/tosa-wm97xx.c |  182 +++++++++++++++++++++++++++++++
- 3 files changed, 195 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/touchscreen/tosa-wm97xx.c
-
-diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
-index 0be05a2..938aed2 100644
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -210,6 +210,18 @@ config TOUCHSCREEN_WM97XX_MAINSTONE
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called mainstone-wm97xx
- 
-+config TOUCHSCREEN_WM97XX_TOSA
-+	tristate "WM97xx Tosa denoiser"
-+	depends on TOUCHSCREEN_WM97XX && MACH_TOSA
-+	help
-+	  Say Y here for support for touchscreen denoising on
-+	  Sharl Zaurus SL-6000 (tosa) system.
-+
-+	  If unsure, say N
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called tosa-wm97xx
-+
- config TOUCHSCREEN_TOUCHWIN
- 	tristate "Touchwin serial touchscreen"
- 	select SERIO
-diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
-index d38156e..d86278b 100644
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
- obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
- obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
- obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
-+obj-$(CONFIG_TOUCHSCREEN_WM97XX_TOSA)	+= tosa-wm97xx.o
- wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)  += wm9705.o
- wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)  += wm9712.o
- wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)  += wm9713.o
-diff --git a/drivers/input/touchscreen/tosa-wm97xx.c b/drivers/input/touchscreen/tosa-wm97xx.c
-new file mode 100644
-index 0000000..8fd542b
---- /dev/null
-+++ b/drivers/input/touchscreen/tosa-wm97xx.c
-@@ -0,0 +1,182 @@
-+/*
-+ * tosa_ts.c  --  Touchscreen driver for Sharp SL-6000 (Tosa).
-+ *
-+ * Copyright 2008 Dmitry Baryshkov
-+ * Copyright 2006 Wolfson Microelectronics PLC.
-+ * Author: Mike Arthur
-+ *         linux@wolfsonmicro.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  Revision history
-+ *     1st Sep 2006  Initial version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/wm97xx.h>
-+#include <linux/fb.h>
-+
-+#include <asm/arch/tosa.h>
-+#include <asm/gpio.h>
-+
-+static unsigned long hsync_time = 0;
-+
-+static void calc_hsync_time(const struct fb_videomode *mode)
-+{
-+	/* The 25 and 44 'magic numbers' are from Sharp's 2.4 patches */
-+	if (mode->yres == 640) {
-+		hsync_time = 25;
-+	} else if (mode->yres == 320) {
-+		hsync_time = 44;
-+	} else {
-+		printk(KERN_ERR "unknown video mode res specified: %dx%d!", mode->xres, mode->yres);
-+		WARN_ON(1);
-+	}
-+
-+	printk(KERN_ERR "tosa-wm97xx: using %lu hsync time\n", hsync_time);
-+}
-+
-+static int fb_notifier_callback(struct notifier_block *self,
-+				unsigned long event, void *_data)
-+{
-+	if (event != FB_EVENT_MODE_CHANGE && event != FB_EVENT_MODE_CHANGE_ALL)
-+		return 0;
-+
-+	calc_hsync_time(tosa_lcd_get_mode());
-+
-+	return 0;
-+}
-+
-+static void tosa_lcd_wait_hsync(void)
-+{
-+	/* Waits for a rising edge on the VGA line */
-+	while (gpio_get_value(TOSA_GPIO_VGA_LINE) == 0);
-+	while (gpio_get_value(TOSA_GPIO_VGA_LINE) != 0);
-+}
-+
-+/* Taken from the Sharp 2.4 kernel code */
-+#define CCNT(a)     asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a))
-+#define CCNT_ON()   asm("mcr p14, 0, %0, C0, C0, 0" : : "r"(1))
-+#define CCNT_OFF()  asm("mcr p14, 0, %0, C0, C0, 0" : : "r"(0))
-+
-+/* On the Sharp SL-6000 (Tosa), due to a noisy LCD, we need to perform a wait
-+ * before sampling the Y axis of the touchscreen */
-+static void tosa_lcd_sync_on(int adcsel)
-+{
-+	unsigned long timer1 = 0, timer2 = 0, wait_time = 0;
-+	if (adcsel & WM97XX_ADCSEL_Y) {
-+		CCNT_ON();
-+		wait_time = hsync_time;
-+
-+		if (wait_time) {
-+
-+			/* wait for LCD rising edge */
-+			tosa_lcd_wait_hsync();
-+			/* get clock */
-+			CCNT(timer1);
-+			CCNT(timer2);
-+
-+			while ((timer2 - timer1) < wait_time) {
-+				CCNT(timer2);
-+			}
-+		}
-+	}
-+}
-+
-+static void tosa_lcd_sync_off(int adcsel)
-+{
-+	if (adcsel & WM97XX_ADCSEL_Y)
-+		CCNT_OFF();
-+}
-+
-+static struct wm97xx_mach_ops tosa_mach_ops = {
-+	.pre_sample =  tosa_lcd_sync_on,
-+	.post_sample = tosa_lcd_sync_off,
-+};
-+
-+static int __devinit tosa_ts_probe(struct platform_device *dev) {
-+	struct wm97xx *wm = platform_get_drvdata(dev);
-+	struct notifier_block *notif;
-+	int err = -ENOMEM;
-+
-+	notif = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
-+	if (!notif)
-+		goto err_alloc;
-+
-+	notif->notifier_call = fb_notifier_callback;
-+
-+	err = gpio_request(TOSA_GPIO_VGA_LINE, "hsync");
-+	if (err)
-+		goto err_gpio;
-+
-+	err = gpio_direction_input(TOSA_GPIO_VGA_LINE);
-+	if (err)
-+		goto err_gpio;
-+
-+	platform_set_drvdata(dev, notif);
-+
-+	err = fb_register_client(notif);
-+	if (err)
-+		goto err_register;
-+
-+	err = wm97xx_register_mach_ops(wm, &tosa_mach_ops);
-+	if (err)
-+		goto err_wm97xx;
-+
-+	calc_hsync_time(tosa_lcd_get_mode());
-+
-+	return 0;
-+
-+err_wm97xx:
-+	fb_unregister_client(notif);
-+err_register:
-+	gpio_free(TOSA_GPIO_VGA_LINE);
-+err_gpio:
-+	kfree(notif);
-+err_alloc:
-+	return err;
-+}
-+
-+
-+static int __devexit tosa_ts_remove(struct platform_device *dev) {
-+	struct wm97xx *wm = platform_get_drvdata(dev);
-+
-+	wm97xx_unregister_mach_ops(wm);
-+
-+	fb_unregister_client(platform_get_drvdata(dev));
-+	gpio_free(TOSA_GPIO_VGA_LINE);
-+	kfree(platform_get_drvdata(dev));
-+
-+	return 0;
-+}
-+
-+static struct platform_driver tosa_ts_driver = {
-+	.driver.name = "wm97xx-touch",
-+	.driver.owner = THIS_MODULE,
-+	.probe = tosa_ts_probe,
-+	.remove = __devexit_p(tosa_ts_remove),
-+};
-+
-+static int __init tosa_ts_init(void)
-+{
-+	return platform_driver_register(&tosa_ts_driver);
-+}
-+
-+static void __exit tosa_ts_exit(void)
-+{
-+	platform_driver_unregister(&tosa_ts_driver);
-+}
-+
-+module_init(tosa_ts_init);
-+module_exit(tosa_ts_exit);
-+
-+/* Module information */
-+MODULE_AUTHOR("Dmitry Baryshkov, Mike Arthur, mike@mikearthur.co.uk, www.wolfsonmicro.com");
-+MODULE_DESCRIPTION("Sharp SL6000 Tosa Touch Screen Denoiser");
-+MODULE_LICENSE("GPL");
--- 
-1.5.4.1
-
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/defconfig b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/defconfig
deleted file mode 100644
index 9513c418f9..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/defconfig
+++ /dev/null
@@ -1,1137 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Mon Dec  8 00:58:55 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_HAVE_CLOCK_LIB=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA_SHARPSL_25x=y
-# CONFIG_PXA_SHARPSL_27x is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_POODLE is not set
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
-CONFIG_MACH_TOSA=y
-CONFIG_PXA25x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 debug "
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-CONFIG_MTD_NAND_TMIO=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_POWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-# CONFIG_KEYBOARD_SPITZ is not set
-# CONFIG_SHARPSL_RC is not set
-CONFIG_KEYBOARD_TOSA=y
-# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-CONFIG_MFD_TC6393XB=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-CONFIG_FB_TMIO=y
-# CONFIG_FB_TMIO_ACCELL is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_TOSA=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA2XX_SOC_AC97=y
-CONFIG_SND_PXA2XX_SOC_TOSA=y
-
-#
-# SoC Audio support for SuperH
-#
-CONFIG_SND_SOC_WM9712=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_TMIO is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_TOSA=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tmiofb-fix-unaccel.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tmiofb-fix-unaccel.patch
deleted file mode 100644
index d611342170..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tmiofb-fix-unaccel.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-Index: linux-2.6.24/drivers/video/tmiofb.c
-===================================================================
---- linux-2.6.24.orig/drivers/video/tmiofb.c	2008-12-07 22:30:26.600128369 +0300
-+++ linux-2.6.24/drivers/video/tmiofb.c	2008-12-07 22:31:42.537112538 +0300
-@@ -689,14 +689,14 @@ static irqreturn_t tmiofb_irq(int irq, v
- 	unsigned int			bbisc	= ioread16(&lcr->bbisc);
- 
- 
-+	iowrite16(bbisc, &lcr->bbisc);
-+
-+#ifdef CONFIG_FB_TMIO_ACCELL
- 	if (unlikely(par->use_polling && irq != -1)) {
- 		printk(KERN_INFO "tmiofb: switching to waitq\n");
- 		par->use_polling = false;
- 	}
- 
--	iowrite16(bbisc, &lcr->bbisc);
--
--#ifdef CONFIG_FB_TMIO_ACCELL
- 	if (bbisc & 1)
- 		wake_up(&par->wait_acc);
- #endif
-@@ -972,8 +972,10 @@ static int tmiofb_suspend(struct platfor
- 		info->fbops->fb_sync(info);
- 
- 
-+#ifdef CONFIG_FB_TMIO_ACCELL
- 	printk(KERN_INFO "tmiofb: switching to polling\n");
- 	par->use_polling = true;
-+#endif
- 	tmiofb_hw_stop(dev);
- 
- 	if (cell->suspend)
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tosa-bl-fixup.diff b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tosa-bl-fixup.diff
deleted file mode 100644
index c4a23d1f49..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tosa-bl-fixup.diff
+++ /dev/null
@@ -1,103 +0,0 @@
-Index: linux-2.6.24/drivers/video/backlight/tosa_bl.c
-===================================================================
---- linux-2.6.24.orig/drivers/video/backlight/tosa_bl.c	2008-11-15 22:59:51.592985003 +0300
-+++ linux-2.6.24/drivers/video/backlight/tosa_bl.c	2008-11-18 04:08:13.021416618 +0300
-@@ -76,6 +76,8 @@ static void pxa_nssp_output(struct tosa_
-
- static void tosa_set_backlight(struct tosa_bl_data *data, int brightness)
- {
-+	pr_debug("tosa_set_backlight\n");
-+
-	/* SetBacklightDuty */
-	i2c_smbus_write_byte_data(&data->client, DAC_CH2, (unsigned char)brightness);
-
-@@ -91,7 +93,7 @@ static void tosa_set_backlight(struct to
-
- static void tosa_lcd_tg_init(struct tosa_bl_data *data)
- {
--	dev_dbg(&data->bl_dev->dev, "tosa_lcd_init\n");
-+	pr_debug("tosa_lcd_init\n");
-
-	/* L3V On */
-	set_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC6393XB_L3V_ON);
-@@ -116,7 +118,7 @@ static void tosa_lcd_tg_on(struct tosa_b
-
-	tosa_lcd_tg_init(data);
-
--	dev_dbg(&data->bl_dev->dev, "tosa_lcd_on: %04x (%d)\n", value, mode->yres);
-+	pr_debug("tosa_lcd_on: %04x (%d)\n", value, mode->yres);
-	pxa_nssp_output(data, TG_PNLCTL, value);
-
-	/* TG LCD pannel power up */
-@@ -129,12 +131,15 @@ static void tosa_lcd_tg_on(struct tosa_b
-
-	/* set common voltage */
-	i2c_smbus_write_byte_data(&data->client, DAC_CH1, data->comadj);
-+
-+	tosa_set_backlight(data, data->bl_dev->props.brightness);
-+
- }
-
- static void tosa_lcd_tg_off(struct tosa_bl_data *data)
- {
-	tosa_set_backlight(data, 0);
--	dev_dbg(&data->bl_dev->dev, "tosa_lcd_off\n");
-+	pr_debug("tosa_lcd_off\n");
-	/* TG LCD VHSA off */
-	pxa_nssp_output(data, TG_PINICTL,0x4);
-	mdelay(50);
-@@ -158,8 +163,6 @@ static int tosa_bl_update_status(struct
-	struct tosa_bl_data *data = dev_get_drvdata(&dev->dev);
-	int new_power = max(props->power, props->fb_blank);
-
--	tosa_set_backlight(data, props->brightness);
--
-	if (new_power)
-		tosa_lcd_tg_off(data);
-	else
-@@ -223,22 +226,26 @@ static int tosa_bl_detect_client(struct
-
-	err = gpio_request(TOSA_TC6393XB_BL_C20MA, "backlight");
-	if (err) {
--		dev_dbg(&data->bl_dev->dev, "Unable to request gpio!\n");
-+		printk(KERN_ERR "tosa-bl; Unable to request gpio!\n");
-		goto err_gpio_bl;
-	}
-
-	err = gpio_request(TOSA_TC6393XB_TG_ON, "tg");
-	if (err) {
--		dev_dbg(&data->bl_dev->dev, "Unable to request gpio!\n");
-+		printk(KERN_ERR "tosa-bl: Unable to request gpio!\n");
-		goto err_gpio_tg;
-	}
-
-	err = ssp_init(&data->nssp_dev,2,0);
-	if (err) {
--		dev_err(&data->bl_dev->dev, "Unable to register NSSP handler!\n");
-+		printk(KERN_ERR "tosa-bl: Unable to register NSSP handler!\n");
-		goto err_ssp_init;
-	}
-
-+	pxa_gpio_mode(GPIO83_NSSP_TX);
-+	pxa_gpio_mode(GPIO81_NSSP_CLK_OUT);
-+	pxa_gpio_mode(GPIO82_NSSP_FRM_OUT);
-+
-	/* Tell the i2c layer a new client has arrived */
-	err = i2c_attach_client(client);
-	if (err)
-@@ -269,7 +276,6 @@ static int tosa_bl_detect_client(struct
- err_fb_register:
-	backlight_device_unregister(data->bl_dev);
- err_bl_register:
--	tosa_set_backlight(data, 0);
-	tosa_lcd_tg_off(data);
-
-	err = i2c_detach_client(client);
-@@ -296,7 +302,6 @@ static int tosa_bl_detach_client(struct
-
-	backlight_device_unregister(data->bl_dev);
-
--	tosa_set_backlight(data, 0);
-	tosa_lcd_tg_off(data);
-
-	/* Try to detach the client from i2c space */
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/versatile-armv6.patch b/packages/kexecboot/linux-kexecboot-2.6.24/versatile-armv6.patch
deleted file mode 100644
index e2d0060ac3..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/versatile-armv6.patch
+++ /dev/null
@@ -1,19 +0,0 @@
----
- arch/arm/mm/Kconfig |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- linux-2.6.23.orig/arch/arm/mm/Kconfig
-+++ linux-2.6.23/arch/arm/mm/Kconfig
-@@ -343,11 +343,11 @@ config CPU_XSC3
- 	select IO_36
- 
- # ARMv6
- config CPU_V6
- 	bool "Support ARM V6 processor"
--	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3
-+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_VERSATILE_PB
- 	default y if ARCH_MX3
- 	select CPU_32v6
- 	select CPU_ABRT_EV6
- 	select CPU_CACHE_V6
- 	select CPU_CACHE_VIPT
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/wm8750-treble.patch b/packages/kexecboot/linux-kexecboot-2.6.24/wm8750-treble.patch
deleted file mode 100644
index 07a8d8e141..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/wm8750-treble.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.23/sound/soc/codecs/wm8750.c	2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23/sound/soc/codecs/wm8750.c	2007-11-02 16:47:35.000000000 +0100
-@@ -189,7 +189,7 @@
- SOC_ENUM("Bass Filter", wm8750_enum[1]),
- SOC_SINGLE("Bass Volume", WM8750_BASS, 0, 15, 1),
- 
--SOC_SINGLE("Treble Volume", WM8750_TREBLE, 0, 15, 0),
-+SOC_SINGLE("Treble Volume", WM8750_TREBLE, 0, 15, 1),
- SOC_ENUM("Treble Cut-off", wm8750_enum[2]),
- 
- SOC_SINGLE("3D Switch", WM8750_3D, 0, 1, 0),
diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/zylonite-boot.patch b/packages/kexecboot/linux-kexecboot-2.6.24/zylonite-boot.patch
deleted file mode 100644
index f41928eca5..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.24/zylonite-boot.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 04c42f566c68b757fdadf54e0e0f9dfe9f3f9b06 Mon Sep 17 00:00:00 2001
-From: eric miao <eric.miao@marvell.com>
-Date: Tue, 19 Jun 2007 16:42:53 +0800
-Subject: [PATCH] [PATCH] make zylonite boot
-
-1. reuse head-xscale.S for XSC3
-
-2. add a workaround for machine ID assignment, which should be done
-   by boot loader
----
- arch/arm/boot/compressed/Makefile      |    4 ++++
- arch/arm/boot/compressed/head-xscale.S |    5 +++++
- 2 files changed, 9 insertions(+)
-
-Index: linux-2.6-pxa3/arch/arm/boot/compressed/Makefile
-===================================================================
---- linux-2.6-pxa3.orig/arch/arm/boot/compressed/Makefile	2007-09-24 11:25:57.000000000 +0200
-+++ linux-2.6-pxa3/arch/arm/boot/compressed/Makefile	2007-09-24 12:26:53.000000000 +0200
-@@ -40,6 +40,10 @@
- OBJS		+= head-xscale.o
- endif
- 
-+ifeq ($(CONFIG_CPU_XSC3),y)
-+OBJS		+= head-xscale.o
-+endif
-+
- ifeq ($(CONFIG_PXA_SHARPSL),y)
- OBJS		+= head-sharpsl.o
- endif
-Index: linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S
-===================================================================
---- linux-2.6-pxa3.orig/arch/arm/boot/compressed/head-xscale.S	2007-09-24 11:42:27.000000000 +0200
-+++ linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S	2007-09-24 12:26:02.000000000 +0200
-@@ -33,6 +33,11 @@
- 		bic	r0, r0, #0x1000		@ clear Icache
- 		mcr	p15, 0, r0, c1, c0, 0
- 
-+#ifdef CONFIG_MACH_ZYLONITE
-+		mov	r7, #(MACH_TYPE_ZYLONITE & 0xff)
-+		orr	r7, r7, #(MACH_TYPE_ZYLONITE & 0xff00)
-+#endif
-+
- #ifdef CONFIG_ARCH_COTULLA_IDP
- 		mov	r7, #MACH_TYPE_COTULLA_IDP
- #endif
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/akita/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/akita/defconfig
deleted file mode 100644
index 88236013ed..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/akita/defconfig
+++ /dev/null
@@ -1,1011 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Mon Feb  2 00:27:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_PXA_SHARPSL_25x is not set
-CONFIG_PXA_SHARPSL_27x=y
-CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
-CONFIG_MACH_BORZOI=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_SHARPSL_RC=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_SPITZ=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/binutils-buildid-arm.patch b/packages/kexecboot/linux-kexecboot-2.6.26/binutils-buildid-arm.patch
deleted file mode 100644
index 68e35e89e1..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/binutils-buildid-arm.patch
+++ /dev/null
@@ -1,16 +0,0 @@
----
- arch/arm/kernel/vmlinux.lds.S |    1 +
- 1 file changed, 1 insertion(+)
-
-Index: linux-2.6.22/arch/arm/kernel/vmlinux.lds.S
-===================================================================
---- linux-2.6.22.orig/arch/arm/kernel/vmlinux.lds.S	2007-09-11 18:32:29.000000000 +0200
-+++ linux-2.6.22/arch/arm/kernel/vmlinux.lds.S	2007-09-11 18:33:42.000000000 +0200
-@@ -94,6 +94,7 @@
- 			TEXT_TEXT
- 			SCHED_TEXT
- 			LOCK_TEXT
-+			*(.note.*)
- #ifdef CONFIG_MMU
- 			*(.fixup)
- #endif
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/bootcdx86/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/bootcdx86/defconfig
deleted file mode 100644
index 1176bc70bd..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/bootcdx86/defconfig
+++ /dev/null
@@ -1,1994 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Sun Jan 20 18:34:58 2008
-#
-# CONFIG_64BIT is not set
-CONFIG_X86_32=y
-# CONFIG_X86_64 is not set
-CONFIG_X86=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DMI=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME_VSYSCALL is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-# CONFIG_ZONE_DMA32 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_AUDIT_ARCH is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-CONFIG_X86_PC=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_VSMP is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-CONFIG_M686=y
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_GENERIC_CPU is not set
-CONFIG_X86_GENERIC=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
-CONFIG_HPET_TIMER=y
-CONFIG_NR_CPUS=8
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_NONFATAL=y
-CONFIG_X86_MCE_P4THERMAL=y
-CONFIG_VM86=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_X86_PAE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MTRR=y
-# CONFIG_EFI is not set
-CONFIG_IRQBALANCE=y
-CONFIG_SECCOMP=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_KEXEC=y
-CONFIG_PHYSICAL_START=0x100000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_SMP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_SMP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_VIDEO is not set
-CONFIG_ACPI_FAN=y
-# CONFIG_ACPI_DOCK is not set
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=y
-# CONFIG_ACPI_SBS is not set
-# CONFIG_APM is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
-CONFIG_HT_IRQ=y
-CONFIG_ISA_DMA_API=y
-CONFIG_ISA=y
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SCx200 is not set
-CONFIG_K8_NB=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-# CONFIG_ISAPNP is not set
-# CONFIG_PNPBIOS is not set
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_IBM_ASM is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_CMD640=y
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_RZ1000=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-CONFIG_SCSI_DPT_I2O=m
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SEAGATE is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_LANCE=m
-CONFIG_NET_VENDOR_SMC=y
-CONFIG_WD80x3=m
-CONFIG_ULTRA=m
-CONFIG_SMC9194=m
-# CONFIG_NET_VENDOR_RACAL is not set
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=m
-CONFIG_TULIP_MWI=y
-CONFIG_TULIP_MMIO=y
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_AT1700=m
-CONFIG_DEPCA=m
-CONFIG_HP100=m
-CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
-# CONFIG_EWRK3 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_LP486E is not set
-# CONFIG_ETH16I is not set
-CONFIG_NE2000=y
-# CONFIG_ZNET is not set
-# CONFIG_SEEQ8005 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_PCNET32_NAPI=y
-CONFIG_AMD8111_ETH=m
-CONFIG_AMD8111E_NAPI=y
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_ADAPTEC_STARFIRE_NAPI=y
-CONFIG_AC3200=m
-CONFIG_APRICOT=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_FORCEDETH_NAPI=y
-CONFIG_CS89x0=m
-CONFIG_EEPRO100=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SUNDANCE=m
-CONFIG_SUNDANCE_MMIO=y
-CONFIG_TLAN=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_VIA_RHINE_NAPI=y
-CONFIG_SC92031=m
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_R8169_NAPI=y
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-CONFIG_SKY2=m
-CONFIG_SK98LIN=m
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TABLET=y
-# CONFIG_TABLET_USB_ACECAD is not set
-# CONFIG_TABLET_USB_AIPTEK is not set
-# CONFIG_TABLET_USB_GTCO is not set
-# CONFIG_TABLET_USB_KBTAB is not set
-CONFIG_TABLET_USB_WACOM=y
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-# CONFIG_MWAVE is not set
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_NSC_GPIO is not set
-# CONFIG_CS5535_GPIO is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-CONFIG_SSB=m
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-CONFIG_USB_DSBR=m
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_I810 is not set
-# CONFIG_DRM_I830 is not set
-# CONFIG_DRM_I915 is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-CONFIG_FB_UVESA=m
-# CONFIG_FB_VESA is not set
-# CONFIG_FB_EFI is not set
-# CONFIG_FB_HECUBA is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I810 is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_INTEL is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CORGI=m
-# CONFIG_BACKLIGHT_PROGEAR is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_VIDEO_SELECT=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_OHAND_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# ISA devices
-#
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_DT019X is not set
-# CONFIG_SND_ES968 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_SC6000 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_WAVEFRONT is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
-CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_LGUEST is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-# CONFIG_DELL_RBU is not set
-# CONFIG_DCDBAS is not set
-CONFIG_DMIID=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
-CONFIG_DOUBLEFAULT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_AES_586 is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/c7x0/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/c7x0/defconfig
deleted file mode 100644
index 7c48947854..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/c7x0/defconfig
+++ /dev/null
@@ -1,1010 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Mon Feb  2 00:55:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-CONFIG_PXA_SHARPSL_25x=y
-# CONFIG_PXA_SHARPSL_27x is not set
-# CONFIG_MACH_POODLE is not set
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
-# CONFIG_MACH_TOSA is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SHARP_C7xx=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_CORGI=y
-# CONFIG_KEYBOARD_SPITZ is not set
-CONFIG_SHARPSL_RC=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
-CONFIG_FB_W100=y
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_CORGI=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/collie.patch b/packages/kexecboot/linux-kexecboot-2.6.26/collie.patch
deleted file mode 100644
index 750be8ecf3..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/collie.patch
+++ /dev/null
@@ -1,2601 +0,0 @@
-Index: linux-2.6.26/arch/arm/Kconfig
-===================================================================
---- linux-2.6.26.orig/arch/arm/Kconfig	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/arch/arm/Kconfig	2008-10-17 18:15:31.391792839 +0200
-@@ -967,7 +967,7 @@
- 
- config CPU_FREQ_SA1110
- 	bool
--	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
-+	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3 || SA1100_COLLIE)
- 	default y
- 
- config CPU_FREQ_INTEGRATOR
-Index: linux-2.6.26/arch/arm/mach-sa1100/collie.c
-===================================================================
---- linux-2.6.26.orig/arch/arm/mach-sa1100/collie.c	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/arch/arm/mach-sa1100/collie.c	2008-10-17 18:15:31.391792839 +0200
-@@ -206,7 +206,7 @@
- }
- 
- static struct flash_platform_data collie_flash_data = {
--	.map_name	= "cfi_probe",
-+	.map_name	= "sharp",
- 	.set_vpp	= collie_set_vpp,
- 	.parts		= collie_partitions,
- 	.nr_parts	= ARRAY_SIZE(collie_partitions),
-Index: linux-2.6.26/arch/arm/mach-sa1100/dma.c
-===================================================================
---- linux-2.6.26.orig/arch/arm/mach-sa1100/dma.c	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/arch/arm/mach-sa1100/dma.c	2008-10-17 18:15:31.399789199 +0200
-@@ -39,7 +39,7 @@
- 
- static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
- 
--static spinlock_t dma_list_lock;
-+static  DEFINE_SPINLOCK(dma_list_lock);
- 
- 
- static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-Index: linux-2.6.26/drivers/input/keyboard/locomokbd.c
-===================================================================
---- linux-2.6.26.orig/drivers/input/keyboard/locomokbd.c	2008-10-17 18:13:16.000000000 +0200
-+++ linux-2.6.26/drivers/input/keyboard/locomokbd.c	2008-10-17 18:15:31.403791239 +0200
-@@ -272,6 +272,7 @@
- 	for (i = 0; i < LOCOMOKBD_NUMKEYS; i++)
- 		set_bit(locomokbd->keycode[i], input_dev->keybit);
- 	clear_bit(0, input_dev->keybit);
-+	locomo_writel(0, locomokbd->base + LOCOMO_KSC);
- 
- 	/* attempt to get the interrupt */
- 	err = request_irq(dev->irq[0], locomokbd_interrupt, 0, "locomokbd", locomokbd);
-Index: linux-2.6.26/drivers/mfd/Kconfig
-===================================================================
---- linux-2.6.26.orig/drivers/mfd/Kconfig	2008-10-17 18:13:21.000000000 +0200
-+++ linux-2.6.26/drivers/mfd/Kconfig	2008-10-17 18:15:31.403791239 +0200
-@@ -77,4 +77,10 @@
- 	tristate "Touchscreen interface support"
- 	depends on MCP_UCB1200 && INPUT
- 
-+config MCP_COLLIE_TS
-+	tristate "Touchscreen collie support"
-+	depends on MCP_UCB1200 && INPUT && !MCP_UCB1200_TS
-+	 ---help---
-+	  Driver for touchscreen on collie - sharp sl-5500.
-+
- endmenu
-Index: linux-2.6.26/drivers/mfd/Makefile
-===================================================================
---- linux-2.6.26.orig/drivers/mfd/Makefile	2008-10-17 18:13:21.000000000 +0200
-+++ linux-2.6.26/drivers/mfd/Makefile	2008-10-17 18:15:31.407791679 +0200
-@@ -14,7 +14,7 @@
- obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
- obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
- obj-$(CONFIG_MCP_UCB1200_TS)	+= ucb1x00-ts.o
--
-+obj-$(CONFIG_MCP_COLLIE_TS)     += collie-ts.o
- ifeq ($(CONFIG_SA1100_ASSABET),y)
- obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
- endif
-Index: linux-2.6.26/drivers/mfd/collie-ts.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26/drivers/mfd/collie-ts.c	2008-10-17 18:15:31.415790559 +0200
-@@ -0,0 +1,449 @@
-+/*
-+ *  Touchscreen driver for UCB1x00-based touchscreens
-+ *
-+ *  Copyright (C) 2001 Russell King, All Rights Reserved.
-+ *  Copyright (C) 2005 Pavel Machek
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * 21-Jan-2002 <jco@ict.es> :
-+ *
-+ * Added support for synchronous A/D mode. This mode is useful to
-+ * avoid noise induced in the touchpanel by the LCD, provided that
-+ * the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin.
-+ * It is important to note that the signal connected to the ADCSYNC
-+ * pin should provide pulses even when the LCD is blanked, otherwise
-+ * a pen touch needed to unblank the LCD will never be read.
-+ */
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/smp.h>
-+#include <linux/smp_lock.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/delay.h>
-+#include <linux/string.h>
-+#include <linux/input.h>
-+#include <linux/device.h>
-+#include <linux/freezer.h>
-+#include <linux/slab.h>
-+#include <linux/kthread.h>
-+#include <linux/semaphore.h>
-+
-+#include <asm/dma.h>
-+#include <asm/arch/collie.h>
-+#include <asm/mach-types.h>
-+
-+#include "ucb1x00.h"
-+
-+struct ucb1x00_ts {
-+	struct input_dev	*idev;
-+	struct ucb1x00		*ucb;
-+
-+	wait_queue_head_t	irq_wait;
-+	struct task_struct	*rtask;
-+	u16			x_res;
-+	u16			y_res;
-+
-+	unsigned int		adcsync:1;
-+};
-+
-+static int adcsync;
-+
-+/**********************************
-+
-+     ................
-+     .              . = 340
-+     .              .
-+     .             ^.
-+     .             ^.
-+     .             ^.
-+     .             ^.
-+     .              .
-+     .             X. = 10
-+     .  <<<<<<<<  Y .
-+     ................
-+     .   Sharp    =200
-+     .              .
-+     .  -   O    -  .
-+     .              .
-+     ................
-+
-+**********************************/
-+
-+
-+static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y)
-+{
-+	struct input_dev *idev = ts->idev;
-+
-+	input_report_abs(idev, ABS_X, x);
-+	input_report_abs(idev, ABS_Y, y);
-+	input_report_abs(idev, ABS_PRESSURE, pressure);
-+        input_report_key(idev, BTN_TOUCH, 1);
-+	input_sync(idev);
-+}
-+
-+static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts)
-+{
-+	struct input_dev *idev = ts->idev;
-+
-+	input_report_abs(idev, ABS_PRESSURE, 0);
-+        input_report_key(idev, BTN_TOUCH, 0);
-+	input_sync(idev);
-+}
-+
-+/*
-+ * Switch to interrupt mode. This set touchscreen to interrupt 
-+ * mode, so that chip is able to send interrupt.
-+ */
-+static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts)
-+{
-+	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
-+			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
-+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
-+			UCB_TS_CR_MODE_INT);
-+}
-+
-+/*
-+ * Switch to pressure mode, and read pressure.  We don't need to wait
-+ * here, since both plates are being driven.
-+ *
-+ * set_read_pressure() in sharp code
-+ */
-+static inline void ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts)
-+{
-+	ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0);
-+	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
-+			  UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW |
-+			  UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
-+
-+	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
-+			  UCB_ADC_INP_AD2 | 
-+			  UCB_ADC_SYNC_ENA);
-+	udelay(100);
-+	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
-+			  UCB_ADC_INP_AD2 | 
-+			  UCB_ADC_SYNC_ENA | UCB_ADC_START);
-+}
-+
-+/*
-+ * Switch to X position mode and measure Y plate.  We switch the plate
-+ * configuration in pressure mode, then switch to position mode.  This
-+ * gives a faster response time.  Even so, we need to wait about 55us
-+ * for things to stabilise.
-+ */
-+static inline void ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts)
-+{
-+	ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
-+	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
-+			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
-+			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
-+
-+
-+	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
-+			  UCB_ADC_INP_TSPY | UCB_ADC_SYNC_ENA);
-+	udelay(100);
-+	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
-+			  UCB_ADC_INP_TSPY | UCB_ADC_SYNC_ENA | 
-+		 	  UCB_ADC_START);
-+}
-+
-+/*
-+ * Switch to Y position mode and measure X plate.  We switch the plate
-+ * configuration in pressure mode, then switch to position mode.  This
-+ * gives a faster response time.  Even so, we need to wait about 55us
-+ * for things to stabilise.
-+ */
-+static inline void ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts)
-+{
-+	ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
-+
-+	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
-+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
-+			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
-+
-+
-+	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
-+			  UCB_ADC_INP_TSPX | UCB_ADC_SYNC_ENA);
-+	udelay(100);
-+	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr |
-+			  UCB_ADC_INP_TSPX | UCB_ADC_SYNC_ENA | 
-+			  UCB_ADC_START);
-+}
-+
-+/*
-+ * Switch to X plate resistance mode.  Set MX to ground, PX to
-+ * supply.  Measure current.
-+ */
-+static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts)
-+{
-+	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
-+			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
-+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-+	return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
-+}
-+
-+/*
-+ * Switch to Y plate resistance mode.  Set MY to ground, PY to
-+ * supply.  Measure current.
-+ */
-+static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts)
-+{
-+	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
-+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
-+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-+	return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
-+}
-+
-+/*
-+ * This is a RT kernel thread that handles the ADC accesses
-+ * (mainly so we can use semaphores in the UCB1200 core code
-+ * to serialise accesses to the ADC).
-+ */
-+static int ucb1x00_thread(void *_ts)
-+{
-+	struct ucb1x00_ts *ts = _ts;
-+	struct task_struct *tsk = current;
-+	DECLARE_WAITQUEUE(wait, tsk);
-+	int state;
-+
-+	/*
-+	 * We could run as a real-time thread.  However, thus far
-+	 * this doesn't seem to be necessary.
-+	 */
-+
-+	add_wait_queue(&ts->irq_wait, &wait);	
-+
-+	while (!kthread_should_stop()) {
-+		unsigned int data[3];
-+			
-+		for (state=0; state<3; state++) {
-+			
-+			ucb1x00_adc_enable(ts->ucb);
-+			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_ADC, UCB_FALLING);
-+			switch (state) {
-+			/* Order matters here; last measurement seems to be more noisy then the
-+			   rest, and we care about pressure least */
-+				case 2: ucb1x00_ts_read_pressure(ts);
-+					break;
-+				case 0: ucb1x00_ts_read_ypos(ts);
-+					break;
-+				case 1: ucb1x00_ts_read_xpos(ts);
-+					break;
-+			}
-+			/* wait for adc */
-+			try_to_freeze();
-+			schedule_timeout(1000 * HZ);
-+			ucb1x00_disable_irq(ts->ucb, UCB_IRQ_ADC, UCB_FALLING);
-+			data[state] = UCB_ADC_DAT(ucb1x00_reg_read(ts->ucb, UCB_ADC_DATA));
-+			ucb1x00_adc_disable(ts->ucb);
-+		}	
-+		
-+		/* If not pressed any more, try to sleep! */
-+		if (data[2] < 300) {
-+			set_task_state(tsk, TASK_INTERRUPTIBLE);
-+			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING);
-+			ucb1x00_ts_mode_int(ts);
-+			ucb1x00_disable(ts->ucb);
-+			ucb1x00_ts_event_release(ts);
-+			try_to_freeze();
-+			schedule_timeout(1000 * HZ);
-+			ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING);
-+			ucb1x00_enable(ts->ucb);
-+		} else {	
-+			ucb1x00_ts_evt_add(ts, data[2], data[1], data[0]);
-+		}
-+		ucb1x00_disable(ts->ucb);
-+		msleep(20);
-+		ucb1x00_enable(ts->ucb);
-+	}
-+
-+	remove_wait_queue(&ts->irq_wait, &wait);
-+
-+	ts->rtask = NULL;
-+	return 0;
-+}
-+
-+/*
-+ * We only detect touch screen _touches_ with this interrupt
-+ * handler, and even then we just schedule our task.
-+ */
-+static void ucb1x00_ts_irq(int idx, void *id)
-+{
-+	struct ucb1x00_ts *ts = id;
-+	wake_up(&ts->irq_wait);
-+}
-+
-+static void ucb1x00_adc_irq(int idx, void *id)
-+{
-+	struct ucb1x00_ts *ts = id;
-+	wake_up(&ts->irq_wait);
-+}
-+
-+static int ucb1x00_ts_open(struct input_dev *idev)
-+{
-+	struct ucb1x00_ts *ts = input_get_drvdata(idev);
-+	int ret = 0;
-+
-+	BUG_ON(ts->rtask);
-+
-+	init_waitqueue_head(&ts->irq_wait);
-+	
-+	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
-+	if (ret < 0)
-+		return ret;
-+	
-+	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_ADC, ucb1x00_adc_irq, ts);
-+	if (ret < 0) {
-+		ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
-+		return ret;
-+	}
-+
-+	ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING);
-+	
-+	/*
-+	 * If we do this at all, we should allow the user to
-+	 * measure and read the X and Y resistance at any time.
-+	 */
-+	ucb1x00_adc_enable(ts->ucb);
-+	ts->x_res = ucb1x00_ts_read_xres(ts);
-+	ts->y_res = ucb1x00_ts_read_yres(ts);
-+	ucb1x00_adc_disable(ts->ucb);
-+
-+	if (machine_is_collie()) {
-+		ucb1x00_io_set_dir(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
-+	}
-+
-+	ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd");
-+	if (!IS_ERR(ts->rtask)) {
-+		ret = 0;
-+	} else {
-+		ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
-+		ts->rtask = NULL;
-+		ret = -EFAULT;
-+	}
-+	
-+	return ret;
-+}
-+
-+/*
-+ * Release touchscreen resources.  Disable IRQs.
-+ */
-+static void ucb1x00_ts_close(struct input_dev *idev)
-+{
-+	struct ucb1x00_ts *ts = input_get_drvdata(idev);
-+
-+	if (ts->rtask)
-+		kthread_stop(ts->rtask);
-+
-+	ucb1x00_enable(ts->ucb);
-+	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
-+	ucb1x00_free_irq(ts->ucb, UCB_IRQ_ADC, ts);
-+	ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
-+	ucb1x00_disable(ts->ucb);
-+}
-+
-+#ifdef CONFIG_PM
-+static int ucb1x00_ts_resume(struct ucb1x00_dev *dev)
-+{
-+	struct ucb1x00_ts *ts = dev->priv;
-+
-+	if (ts->rtask != NULL) {
-+		/*
-+		 * Restart the TS thread to ensure the
-+		 * TS interrupt mode is set up again
-+		 * after sleep.
-+		 */
-+		wake_up(&ts->irq_wait);
-+	}
-+	return 0;
-+}
-+#else
-+#define ucb1x00_ts_resume NULL
-+#endif
-+
-+
-+/*
-+ * Initialisation.
-+ */
-+static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
-+{
-+	struct ucb1x00_ts *ts;
-+	struct input_dev *idev;
-+	int err;
-+
-+	ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
-+	idev = input_allocate_device();
-+	if (!ts || !idev) {
-+		err = -ENOMEM;
-+		goto fail;
-+	}
-+
-+	ts->ucb = dev->ucb;
-+	ts->idev = idev;
-+	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
-+
-+	input_set_drvdata(idev, ts);
-+	idev->name       = "Touchscreen panel";
-+	idev->id.product = ts->ucb->id;
-+	idev->open       = ucb1x00_ts_open;
-+	idev->close      = ucb1x00_ts_close;
-+
-+	__set_bit(EV_ABS, idev->evbit);
-+	__set_bit(ABS_X, idev->absbit);
-+	__set_bit(ABS_Y, idev->absbit);
-+	__set_bit(ABS_PRESSURE, idev->absbit);
-+
-+        input_set_abs_params(ts->idev, ABS_X, 0, 450, 0, 0);
-+        input_set_abs_params(ts->idev, ABS_Y, 200, 800, 0, 0);
-+        input_set_abs_params(ts->idev, ABS_PRESSURE, 400, 800, 0, 0);
-+
-+
-+	err = input_register_device(idev);
-+	if (err)
-+		goto fail;
-+
-+	dev->priv = ts;
-+
-+	return 0;
-+
-+ fail:
-+	input_free_device(idev);
-+	kfree(ts);
-+	return err;
-+}
-+
-+static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
-+{
-+	struct ucb1x00_ts *ts = dev->priv;
-+
-+	input_unregister_device(ts->idev);
-+	kfree(ts);
-+}
-+
-+static struct ucb1x00_driver ucb1x00_ts_driver = {
-+	.add		= ucb1x00_ts_add,
-+	.remove		= ucb1x00_ts_remove,
-+	.resume		= ucb1x00_ts_resume,
-+};
-+
-+static int __init ucb1x00_ts_init(void)
-+{
-+	return ucb1x00_register_driver(&ucb1x00_ts_driver);
-+}
-+
-+static void __exit ucb1x00_ts_exit(void)
-+{
-+	ucb1x00_unregister_driver(&ucb1x00_ts_driver);
-+}
-+
-+module_param(adcsync, int, 0444);
-+module_init(ucb1x00_ts_init);
-+module_exit(ucb1x00_ts_exit);
-+
-+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
-+MODULE_DESCRIPTION("UCB1x00 touchscreen driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26/drivers/mfd/ucb1x00.h
-===================================================================
---- linux-2.6.26.orig/drivers/mfd/ucb1x00.h	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/mfd/ucb1x00.h	2008-10-17 18:15:31.415790559 +0200
-@@ -34,7 +34,10 @@
- #define UCB_IE_TCLIP		(1 << 14)
- #define UCB_IE_ACLIP		(1 << 15)
- 
-+/* UCB1200 irqs */
-+#define UCB_IRQ_ADC		11
- #define UCB_IRQ_TSPX		12
-+#define UCB_IRQ_TSMX		13
- 
- #define UCB_TC_A	0x05
- #define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
-Index: linux-2.6.26/drivers/mtd/chips/Kconfig
-===================================================================
---- linux-2.6.26.orig/drivers/mtd/chips/Kconfig	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/mtd/chips/Kconfig	2008-10-17 18:15:31.419791479 +0200
-@@ -239,5 +239,13 @@
- 	  used for XIP purposes.  If you're not sure what this is all about
- 	  then say N.
- 
-+config MTD_SHARP
-+        tristate "pre-CFI Sharp chip support"
-+        depends on MTD
-+        help
-+          This option enables support for flash chips using Sharp-compatible
-+          commands, including some which are not CFI-compatible and hence
-+          cannot be used with the CONFIG_MTD_CFI_INTELxxx options.
-+
- endmenu
- 
-Index: linux-2.6.26/drivers/mtd/chips/Makefile
-===================================================================
---- linux-2.6.26.orig/drivers/mtd/chips/Makefile	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/mtd/chips/Makefile	2008-10-17 18:15:31.419791479 +0200
-@@ -12,4 +12,5 @@
- obj-$(CONFIG_MTD_JEDECPROBE)	+= jedec_probe.o
- obj-$(CONFIG_MTD_RAM)		+= map_ram.o
- obj-$(CONFIG_MTD_ROM)		+= map_rom.o
-+obj-$(CONFIG_MTD_SHARP)         += sharp.o
- obj-$(CONFIG_MTD_ABSENT)	+= map_absent.o
-Index: linux-2.6.26/drivers/mtd/chips/sharp.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26/drivers/mtd/chips/sharp.c	2008-10-17 18:15:31.423790399 +0200
-@@ -0,0 +1,645 @@
-+/*
-+ * MTD chip driver for pre-CFI Sharp flash chips
-+ *
-+ * Copyright 2000,2001 David A. Schleef <ds@schleef.org>
-+ *           2000,2001 Lineo, Inc.
-+ *
-+ * $Id: sharp.c,v 1.17 2005/11/29 14:28:28 gleixner Exp $
-+ *
-+ * Devices supported:
-+ *   LH28F016SCT Symmetrical block flash memory, 2Mx8
-+ *   LH28F008SCT Symmetrical block flash memory, 1Mx8
-+ *
-+ * Documentation:
-+ *   http://www.sharpmeg.com/datasheets/memic/flashcmp/
-+ *   http://www.sharpmeg.com/datasheets/memic/flashcmp/01symf/16m/016sctl9.pdf
-+ *   016sctl9.pdf
-+ *
-+ * Limitations:
-+ *   This driver only supports 4x1 arrangement of chips.
-+ *   Not tested on anything but PowerPC.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/sched.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/cfi.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+
-+#define CMD_RESET		0xffffffff
-+#define CMD_READ_ID		0x90909090
-+#define CMD_READ_STATUS		0x70707070
-+#define CMD_CLEAR_STATUS	0x50505050
-+#define CMD_BLOCK_ERASE_1	0x20202020
-+#define CMD_BLOCK_ERASE_2	0xd0d0d0d0
-+#define CMD_BYTE_WRITE		0x40404040
-+#define CMD_SUSPEND		0xb0b0b0b0
-+#define CMD_RESUME		0xd0d0d0d0
-+#define CMD_SET_BLOCK_LOCK_1	0x60606060
-+#define CMD_SET_BLOCK_LOCK_2	0x01010101
-+#define CMD_SET_MASTER_LOCK_1	0x60606060
-+#define CMD_SET_MASTER_LOCK_2	0xf1f1f1f1
-+#define CMD_CLEAR_BLOCK_LOCKS_1	0x60606060
-+#define CMD_CLEAR_BLOCK_LOCKS_2	0xd0d0d0d0
-+
-+#define SR_READY		0x80808080 // 1 = ready
-+#define SR_ERASE_SUSPEND	0x40404040 // 1 = block erase suspended
-+#define SR_ERROR_ERASE		0x20202020 // 1 = error in block erase or clear lock bits
-+#define SR_ERROR_WRITE		0x10101010 // 1 = error in byte write or set lock bit
-+#define	SR_VPP			0x08080808 // 1 = Vpp is low
-+#define SR_WRITE_SUSPEND	0x04040404 // 1 = byte write suspended
-+#define SR_PROTECT		0x02020202 // 1 = lock bit set
-+#define SR_RESERVED		0x01010101
-+
-+#define SR_ERRORS (SR_ERROR_ERASE|SR_ERROR_WRITE|SR_VPP|SR_PROTECT)
-+
-+#define BLOCK_MASK		0xfffe0000
-+
-+/* Configuration options */
-+
-+#define AUTOUNLOCK  /* automatically unlocks blocks before erasing */
-+
-+static struct mtd_info *sharp_probe(struct map_info *);
-+
-+static int sharp_probe_map(struct map_info *map, struct mtd_info *mtd);
-+
-+static int sharp_read(struct mtd_info *mtd, loff_t from, size_t len,
-+	size_t *retlen, u_char *buf);
-+static int sharp_write(struct mtd_info *mtd, loff_t from, size_t len,
-+	size_t *retlen, const u_char *buf);
-+static int sharp_erase(struct mtd_info *mtd, struct erase_info *instr);
-+static void sharp_sync(struct mtd_info *mtd);
-+static int sharp_suspend(struct mtd_info *mtd);
-+static void sharp_resume(struct mtd_info *mtd);
-+static void sharp_destroy(struct mtd_info *mtd);
-+
-+static int sharp_write_oneword(struct map_info *map, struct flchip *chip,
-+	unsigned long adr, __u32 datum);
-+static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip,
-+	unsigned long adr);
-+#ifdef AUTOUNLOCK
-+static inline void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip,
-+	unsigned long adr);
-+#endif
-+
-+
-+struct sharp_info{
-+	struct flchip *chip;
-+	int bogus;
-+	int chipshift;
-+	int numchips;
-+	struct flchip chips[1];
-+};
-+
-+static void sharp_destroy(struct mtd_info *mtd);
-+
-+static struct mtd_chip_driver sharp_chipdrv = {
-+	.probe		= sharp_probe,
-+	.destroy	= sharp_destroy,
-+	.name		= "sharp",
-+	.module		= THIS_MODULE
-+};
-+
-+static void sharp_udelay(unsigned long i) {
-+	if (in_interrupt()) {
-+		udelay(i);
-+	} else {
-+		schedule();
-+	}
-+}
-+
-+static struct mtd_info *sharp_probe(struct map_info *map)
-+{
-+	struct mtd_info *mtd = NULL;
-+	struct sharp_info *sharp = NULL;
-+	int width;
-+
-+	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-+	if(!mtd)
-+		return NULL;
-+
-+	sharp = kzalloc(sizeof(*sharp), GFP_KERNEL);
-+	if(!sharp) {
-+		kfree(mtd);
-+		return NULL;
-+	}
-+
-+	width = sharp_probe_map(map,mtd);
-+	if(!width){
-+		kfree(mtd);
-+		kfree(sharp);
-+		return NULL;
-+	}
-+
-+	mtd->priv = map;
-+	mtd->type = MTD_NORFLASH;
-+	mtd->erase = sharp_erase;
-+	mtd->read = sharp_read;
-+	mtd->write = sharp_write;
-+	mtd->sync = sharp_sync;
-+	mtd->suspend = sharp_suspend;
-+	mtd->resume = sharp_resume;
-+	mtd->flags = MTD_CAP_NORFLASH;
-+	mtd->writesize = 1;
-+	mtd->name = map->name;
-+
-+	sharp->chipshift = 24;
-+	sharp->numchips = 1;
-+	sharp->chips[0].start = 0;
-+	sharp->chips[0].state = FL_READY;
-+	sharp->chips[0].mutex = &sharp->chips[0]._spinlock;
-+	sharp->chips[0].word_write_time = 0;
-+	init_waitqueue_head(&sharp->chips[0].wq);
-+	spin_lock_init(&sharp->chips[0]._spinlock);
-+
-+	map->fldrv = &sharp_chipdrv;
-+	map->fldrv_priv = sharp;
-+
-+	__module_get(THIS_MODULE);
-+	return mtd;
-+}
-+
-+static inline void sharp_send_cmd(struct map_info *map, unsigned long cmd, unsigned long adr)
-+{
-+	map_word map_cmd;
-+	map_cmd.x[0] = cmd;
-+	map_write(map, map_cmd, adr);
-+}
-+
-+static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
-+{
-+	map_word tmp, read0, read4;
-+	unsigned long base = 0;
-+	int width = 4;
-+
-+	tmp = map_read(map, base+0);
-+
-+	sharp_send_cmd(map, CMD_READ_ID, base+0);
-+
-+	read0 = map_read(map, base+0);
-+	read4 = map_read(map, base+4);
-+	if (read0.x[0] == 0x00b000b0) {
-+		printk("Sharp chip, %lx, %lx, width = %d\n", read0.x[0], read4.x[0], width);
-+		/* Prints b000b0, b000b0, width = 4 on collie */
-+		switch(read4.x[0]){
-+		case 0xaaaaaaaa:
-+		case 0xa0a0a0a0:
-+			/* aa - LH28F016SCT-L95 2Mx8, 32 64k blocks*/
-+			/* a0 - LH28F016SCT-Z4  2Mx8, 32 64k blocks*/
-+			mtd->erasesize = 0x10000 * width;
-+			mtd->size = 0x200000 * width;
-+			return width;
-+		case 0xa6a6a6a6:
-+			/* a6 - LH28F008SCT-L12 1Mx8, 16 64k blocks*/
-+			/* a6 - LH28F008SCR-L85 1Mx8, 16 64k blocks*/
-+			mtd->erasesize = 0x10000 * width;
-+			mtd->size = 0x100000 * width;
-+			return width;
-+		case 0x00b000b0:
-+			/* a6 - LH28F640BFHE 8 64k * 2 chip blocks*/
-+			mtd->erasesize = 0x10000 * width / 2;
-+			mtd->size = 0x800000 * width / 2;
-+			return width;
-+		default:
-+			printk("Sort-of looks like sharp flash, 0x%08lx 0x%08lx\n",
-+				read0.x[0], read4.x[0]);
-+		}
-+	} else if ((map_read(map, base+0).x[0] == CMD_READ_ID)){
-+		/* RAM, probably */
-+		printk("Looks like RAM\n");
-+		map_write(map, tmp, base+0);
-+	}else{
-+		printk("Doesn't look like sharp flash, 0x%08lx 0x%08lx\n",
-+			read0.x[0], read4.x[0]);
-+	}
-+
-+	return 0;
-+}
-+
-+/* This function returns with the chip->mutex lock held. */
-+static int sharp_wait(struct map_info *map, struct flchip *chip)
-+{
-+	map_word status;
-+	unsigned long timeo = jiffies + HZ;
-+	DECLARE_WAITQUEUE(wait, current);
-+	int adr = 0;
-+
-+retry:
-+	spin_lock_bh(chip->mutex);
-+
-+	switch (chip->state) {
-+	case FL_READY:
-+		sharp_send_cmd(map, CMD_READ_STATUS, adr);
-+		chip->state = FL_STATUS;
-+	case FL_STATUS:
-+		status = map_read(map, adr);
-+		if ((status.x[0] & SR_READY) == SR_READY)
-+			break;
-+		spin_unlock_bh(chip->mutex);
-+		if (time_after(jiffies, timeo)) {
-+			printk("Waiting for chip to be ready timed out in erase\n");
-+			return -EIO;
-+		}
-+		sharp_udelay(1);
-+		goto retry;
-+	default:
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		add_wait_queue(&chip->wq, &wait);
-+
-+		spin_unlock_bh(chip->mutex);
-+
-+		sharp_udelay(1);
-+
-+		set_current_state(TASK_RUNNING);
-+		remove_wait_queue(&chip->wq, &wait);
-+
-+		if(signal_pending(current))
-+			return -EINTR;
-+
-+		timeo = jiffies + HZ;
-+
-+		goto retry;
-+	}
-+
-+	sharp_send_cmd(map, CMD_RESET, adr);
-+
-+	chip->state = FL_READY;
-+
-+	return 0;
-+}
-+
-+static void sharp_release(struct flchip *chip)
-+{
-+	wake_up(&chip->wq);
-+	spin_unlock_bh(chip->mutex);
-+}
-+
-+static int sharp_read(struct mtd_info *mtd, loff_t from, size_t len,
-+	size_t *retlen, u_char *buf)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct sharp_info *sharp = map->fldrv_priv;
-+	int chipnum;
-+	int ret = 0;
-+	int ofs = 0;
-+
-+	chipnum = (from >> sharp->chipshift);
-+	ofs = from & ((1 << sharp->chipshift)-1);
-+
-+	*retlen = 0;
-+
-+	while(len){
-+		unsigned long thislen;
-+
-+		if(chipnum>=sharp->numchips)
-+			break;
-+
-+		thislen = len;
-+		if(ofs+thislen >= (1<<sharp->chipshift))
-+			thislen = (1<<sharp->chipshift) - ofs;
-+
-+		ret = sharp_wait(map,&sharp->chips[chipnum]);
-+		if(ret<0)
-+			break;
-+
-+		map_copy_from(map,buf,ofs,thislen);
-+
-+		sharp_release(&sharp->chips[chipnum]);
-+
-+		*retlen += thislen;
-+		len -= thislen;
-+		buf += thislen;
-+
-+		ofs = 0;
-+		chipnum++;
-+	}
-+	return ret;
-+}
-+
-+static int sharp_write(struct mtd_info *mtd, loff_t to, size_t len,
-+	size_t *retlen, const u_char *buf)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct sharp_info *sharp = map->fldrv_priv;
-+	int ret = 0;
-+	int i,j;
-+	int chipnum;
-+	unsigned long ofs;
-+	union { u32 l; unsigned char uc[4]; } tbuf;
-+
-+	*retlen = 0;
-+
-+	while(len){
-+		tbuf.l = 0xffffffff;
-+		chipnum = to >> sharp->chipshift;
-+		ofs = to & ((1<<sharp->chipshift)-1);
-+
-+		j=0;
-+		for(i=ofs&3;i<4 && len;i++){
-+			tbuf.uc[i] = *buf;
-+			buf++;
-+			to++;
-+			len--;
-+			j++;
-+		}
-+		sharp_write_oneword(map, &sharp->chips[chipnum], ofs&~3, tbuf.l);
-+		if(ret<0)
-+			return ret;
-+		(*retlen)+=j;
-+	}
-+
-+	return 0;
-+}
-+
-+static int sharp_write_oneword(struct map_info *map, struct flchip *chip,
-+	unsigned long adr, __u32 datum)
-+{
-+	int ret;
-+	int try;
-+	int i;
-+	map_word data, status;
-+
-+	status.x[0] = 0;
-+	ret = sharp_wait(map,chip);
-+	if (ret < 0)
-+		return ret;
-+
-+	for (try=0; try<10; try++) {
-+		long timeo;
-+
-+		sharp_send_cmd(map, CMD_BYTE_WRITE, adr);
-+		/* cpu_to_le32 -> hack to fix the writel be->le conversion */
-+		data.x[0] = cpu_to_le32(datum);
-+		map_write(map, data, adr);
-+
-+		chip->state = FL_WRITING;
-+		timeo = jiffies + (HZ/2);
-+
-+		sharp_send_cmd(map, CMD_READ_STATUS, adr);
-+		for(i=0;i<100;i++){
-+			status = map_read(map, adr);
-+			if((status.x[0] & SR_READY) == SR_READY)
-+				break;
-+		}
-+#ifdef AUTOUNLOCK
-+		if (status.x[0] & SR_PROTECT) { /* lock block */
-+			sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
-+			sharp_unlock_oneblock(map,chip,adr);
-+			sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
-+			sharp_send_cmd(map, CMD_RESET, adr);
-+			continue;
-+		}
-+#endif
-+		if(i==100){
-+			printk("sharp: timed out writing\n");
-+		}
-+
-+		if (!(status.x[0] & SR_ERRORS))
-+			break;
-+
-+		printk("sharp: error writing byte at addr=%08lx status=%08lx\n", adr, status.x[0]);
-+
-+		sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
-+	}
-+	sharp_send_cmd(map, CMD_RESET, adr);
-+	chip->state = FL_READY;
-+
-+	sharp_release(chip);
-+
-+	return 0;
-+}
-+
-+static int sharp_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct sharp_info *sharp = map->fldrv_priv;
-+	unsigned long adr,len;
-+	int chipnum, ret=0;
-+
-+	if(instr->addr & (mtd->erasesize - 1))
-+		return -EINVAL;
-+	if(instr->len & (mtd->erasesize - 1))
-+		return -EINVAL;
-+	if(instr->len + instr->addr > mtd->size)
-+		return -EINVAL;
-+
-+	chipnum = instr->addr >> sharp->chipshift;
-+	adr = instr->addr & ((1<<sharp->chipshift)-1);
-+	len = instr->len;
-+
-+	while(len){
-+		ret = sharp_erase_oneblock(map, &sharp->chips[chipnum], adr);
-+		if(ret)return ret;
-+
-+		if (adr >= 0xfe0000) {
-+			adr += mtd->erasesize / 8;
-+			len -= mtd->erasesize / 8;
-+		} else {
-+			adr += mtd->erasesize;
-+			len -= mtd->erasesize;
-+		}
-+		if(adr >> sharp->chipshift){
-+			adr = 0;
-+			chipnum++;
-+			if(chipnum>=sharp->numchips)
-+				break;
-+		}
-+	}
-+
-+	instr->state = MTD_ERASE_DONE;
-+	mtd_erase_callback(instr);
-+
-+	return 0;
-+}
-+
-+static inline int sharp_do_wait_for_ready(struct map_info *map, struct flchip *chip,
-+	unsigned long adr)
-+{
-+	int ret;
-+	unsigned long timeo;
-+	map_word status;
-+	DECLARE_WAITQUEUE(wait, current);
-+
-+	sharp_send_cmd(map, CMD_READ_STATUS, adr);
-+	status = map_read(map, adr);
-+
-+	timeo = jiffies + HZ * 10;
-+
-+	while (time_before(jiffies, timeo)) {
-+		sharp_send_cmd(map, CMD_READ_STATUS, adr);
-+		status = map_read(map, adr);
-+		if ((status.x[0] & SR_READY) == SR_READY) {
-+			ret = 0;
-+			goto out;
-+		}
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		add_wait_queue(&chip->wq, &wait);
-+
-+		spin_unlock_bh(chip->mutex);
-+
-+		schedule_timeout(1);
-+		schedule();
-+
-+		spin_lock_bh(chip->mutex);
-+
-+		remove_wait_queue(&chip->wq, &wait);
-+		set_current_state(TASK_RUNNING);
-+	}
-+	ret = -ETIME;
-+out:
-+	return ret;
-+}
-+
-+static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip,
-+	unsigned long adr)
-+{
-+	int ret;
-+	map_word status;
-+
-+	ret = sharp_wait(map,chip);
-+	if (ret < 0)
-+		return ret;
-+
-+#ifdef AUTOUNLOCK
-+	/* This seems like a good place to do an unlock */
-+	sharp_unlock_oneblock(map,chip,adr);
-+#endif
-+
-+	sharp_send_cmd(map, CMD_BLOCK_ERASE_1, adr);
-+	sharp_send_cmd(map, CMD_BLOCK_ERASE_2, adr);
-+
-+	chip->state = FL_ERASING;
-+
-+	ret = sharp_do_wait_for_ready(map,chip,adr);
-+	if(ret<0) {
-+		spin_unlock_bh(chip->mutex);
-+		return ret;
-+	}
-+
-+	sharp_send_cmd(map, CMD_READ_STATUS, adr);
-+	status = map_read(map, adr);
-+
-+	if (!(status.x[0] & SR_ERRORS)) {
-+		sharp_send_cmd(map, CMD_RESET, adr);
-+		chip->state = FL_READY;
-+		spin_unlock_bh(chip->mutex);
-+		return 0;
-+	}
-+
-+	printk("sharp: error erasing block at addr=%08lx status=%08lx\n", adr, status.x[0]);
-+	sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
-+
-+	sharp_release(chip);
-+
-+	return -EIO;
-+}
-+
-+#ifdef AUTOUNLOCK
-+static inline void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip,
-+	unsigned long adr)
-+{
-+	map_word status;
-+
-+	sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_1, adr & BLOCK_MASK);
-+	sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_2, adr & BLOCK_MASK);
-+
-+	sharp_do_wait_for_ready(map,chip,adr);
-+
-+	status = map_read(map, adr);
-+
-+	if (!(status.x[0] & SR_ERRORS)) {
-+		sharp_send_cmd(map, CMD_RESET, adr);
-+		chip->state = FL_READY;
-+		return;
-+	}
-+
-+	printk("sharp: error unlocking block at addr=%08lx status=%08lx\n", adr, status.x[0]);
-+	sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
-+}
-+#endif
-+
-+static void sharp_sync(struct mtd_info *mtd)
-+{
-+}
-+
-+static int sharp_suspend(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct sharp_info *sharp = map->fldrv_priv;
-+	int i;
-+	struct flchip *chip;
-+	int ret = 0;
-+
-+	for (i = 0; !ret && i < sharp->numchips; i++) {
-+		chip = &sharp->chips[i];
-+		ret = sharp_wait(map,chip);
-+
-+		if (ret) {
-+			ret = -EAGAIN;
-+		} else {
-+			chip->state = FL_PM_SUSPENDED;
-+			spin_unlock_bh(chip->mutex);
-+		}
-+	}
-+	return ret;
-+}
-+
-+static void sharp_resume(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct sharp_info *sharp = map->fldrv_priv;
-+	int i;
-+	struct flchip *chip;
-+
-+	for (i = 0; i < sharp->numchips; i++) {
-+		chip = &sharp->chips[i];
-+
-+		spin_lock_bh(chip->mutex);
-+
-+		if (chip->state == FL_PM_SUSPENDED) {
-+			/* We need to force it back to a known state */
-+			sharp_send_cmd(map, CMD_RESET, chip->start);
-+			chip->state = FL_READY;
-+			wake_up(&chip->wq);
-+		}
-+
-+		spin_unlock_bh(chip->mutex);
-+	}
-+}
-+
-+static void sharp_destroy(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct sharp_info *sharp = map->fldrv_priv;
-+
-+	kfree(sharp);
-+}
-+
-+static int __init sharp_probe_init(void)
-+{
-+	printk("MTD Sharp chip driver <ds@lineo.com>\n");
-+
-+	register_mtd_chip_driver(&sharp_chipdrv);
-+
-+	return 0;
-+}
-+
-+static void __exit sharp_probe_exit(void)
-+{
-+	unregister_mtd_chip_driver(&sharp_chipdrv);
-+}
-+
-+module_init(sharp_probe_init);
-+module_exit(sharp_probe_exit);
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("David Schleef <ds@schleef.org>");
-+MODULE_DESCRIPTION("Old MTD chip driver for pre-CFI Sharp flash chips");
-Index: linux-2.6.26/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.26.orig/drivers/mtd/maps/Kconfig	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/mtd/maps/Kconfig	2008-10-17 18:15:31.431789839 +0200
-@@ -392,7 +392,7 @@
- 
- config MTD_SA1100
- 	tristate "CFI Flash device mapped on StrongARM SA11x0"
--	depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
-+	depends on (MTD_CFI || MTD_SHARP) && ARCH_SA1100 && MTD_PARTITIONS
- 	help
- 	  This enables access to the flash chips on most platforms based on
- 	  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
-Index: linux-2.6.26/drivers/mtd/maps/sa1100-flash.c
-===================================================================
---- linux-2.6.26.orig/drivers/mtd/maps/sa1100-flash.c	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/mtd/maps/sa1100-flash.c	2008-10-17 18:15:31.431789839 +0200
-@@ -210,6 +210,12 @@
- 		goto err;
- 	}
- 	subdev->mtd->owner = THIS_MODULE;
-+	
-+#ifdef CONFIG_SA1100_COLLIE
-+	/* collie flash starts locked */
-+//	 if (subdev->mtd->unlock)
-+//		 subdev->mtd->unlock(subdev->mtd, 0xc0000, subdev->mtd->size - 0xc0000);
-+#endif
- 
- 	printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, "
- 		"%d-bit\n", phys, subdev->mtd->size >> 20,
-Index: linux-2.6.26/drivers/net/wireless/hostap/hostap_cs.c
-===================================================================
---- linux-2.6.26.orig/drivers/net/wireless/hostap/hostap_cs.c	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/net/wireless/hostap/hostap_cs.c	2008-10-17 18:15:31.435790279 +0200
-@@ -35,7 +35,7 @@
- module_param(ignore_cis_vcc, int, 0444);
- MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry");
- 
--
-+int activar=0;
- /* struct local_info::hw_priv */
- struct hostap_cs_priv {
- 	dev_node_t node;
-@@ -499,11 +499,13 @@
- 
- 	PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
- 	p_dev->conf.IntType = INT_MEMORY_AND_IO;
--
-+	
-+	activar=0;
- 	ret = prism2_config(p_dev);
- 	if (ret) {
- 		PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
- 	}
-+	activar=1;
- 
- 	return ret;
- }
-Index: linux-2.6.26/drivers/net/wireless/hostap/hostap_hw.c
-===================================================================
---- linux-2.6.26.orig/drivers/net/wireless/hostap/hostap_hw.c	2008-10-17 18:13:21.000000000 +0200
-+++ linux-2.6.26/drivers/net/wireless/hostap/hostap_hw.c	2008-10-17 18:15:31.443789719 +0200
-@@ -54,6 +54,7 @@
- #include "hostap.h"
- #include "hostap_ap.h"
- 
-+extern int activar;
- 
- /* #define final_version */
- 
-@@ -1534,6 +1535,8 @@
- 	if (local->hw_downloading)
- 		return 1;
- 
-+	activar=1;
-+
- 	if (prism2_hw_init(dev, initial)) {
- 		return local->no_pri ? 0 : 1;
- 	}
-@@ -2665,8 +2668,15 @@
- 	int events = 0;
- 	u16 ev;
- 
--	iface = netdev_priv(dev);
--	local = iface->local;
-+
-+	// Todos los parametros de entrada son correctos (no son nulos). De momento esta es la unica forma que conozco de detectar el problema.
-+	if (!activar) {
-+		printk("hostap_hw.c: INTERRUPT BEFORE DEVICE INIT!\n");
-+		return IRQ_HANDLED;
-+	}
-+
-+ 	iface = netdev_priv(dev);
-+ 	local = iface->local;
- 
- 	if(dev->base_addr == 0)
- 	{
-Index: linux-2.6.26/drivers/net/wireless/hostap/hostap_pci.c
-===================================================================
---- linux-2.6.26.orig/drivers/net/wireless/hostap/hostap_pci.c	2008-10-17 18:13:18.000000000 +0200
-+++ linux-2.6.26/drivers/net/wireless/hostap/hostap_pci.c	2008-10-17 18:15:31.447790279 +0200
-@@ -19,6 +19,7 @@
- 
- #include "hostap_wlan.h"
- 
-+int activar=1;
- 
- static char *dev_info = "hostap_pci";
- 
-Index: linux-2.6.26/drivers/net/wireless/hostap/hostap_plx.c
-===================================================================
---- linux-2.6.26.orig/drivers/net/wireless/hostap/hostap_plx.c	2008-10-17 18:13:18.000000000 +0200
-+++ linux-2.6.26/drivers/net/wireless/hostap/hostap_plx.c	2008-10-17 18:15:31.451790719 +0200
-@@ -21,7 +21,7 @@
- #include <asm/io.h>
- 
- #include "hostap_wlan.h"
--
-+int activar=1;
- 
- static char *dev_info = "hostap_plx";
- 
-Index: linux-2.6.26/drivers/pcmcia/sa1100_generic.c
-===================================================================
---- linux-2.6.26.orig/drivers/pcmcia/sa1100_generic.c	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/pcmcia/sa1100_generic.c	2008-10-17 18:15:31.459789719 +0200
-@@ -81,13 +81,14 @@
- 	return ret;
- }
- 
--static struct device_driver sa11x0_pcmcia_driver = {
--	.probe		= sa11x0_drv_pcmcia_probe,
--	.remove		= soc_common_drv_pcmcia_remove,
--	.name		= "sa11x0-pcmcia",
--	.bus		= &platform_bus_type,
--	.suspend 	= pcmcia_socket_dev_suspend,
--	.resume 	= pcmcia_socket_dev_resume,
-+static struct platform_driver sa11x0_pcmcia_driver = {
-+	.driver 	= {
-+		.name   = "sa11x0-pcmcia",
-+		.probe	= sa11x0_drv_pcmcia_probe,
-+		.remove	= soc_common_drv_pcmcia_remove,
-+		.suspend= pcmcia_socket_dev_suspend,
-+		.resume	= pcmcia_socket_dev_resume,
-+	},
- };
- 
- /* sa11x0_pcmcia_init()
-@@ -100,7 +101,7 @@
-  */
- static int __init sa11x0_pcmcia_init(void)
- {
--	return driver_register(&sa11x0_pcmcia_driver);
-+	return platform_driver_register(&sa11x0_pcmcia_driver);
- }
- 
- /* sa11x0_pcmcia_exit()
-@@ -110,7 +111,7 @@
-  */
- static void __exit sa11x0_pcmcia_exit(void)
- {
--	driver_unregister(&sa11x0_pcmcia_driver);
-+	platform_driver_unregister(&sa11x0_pcmcia_driver);
- }
- 
- MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
-Index: linux-2.6.26/drivers/spi/Kconfig
-===================================================================
---- linux-2.6.26.orig/drivers/spi/Kconfig	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/spi/Kconfig	2008-10-17 18:15:31.463790519 +0200
-@@ -123,6 +123,10 @@
- 	  This enables using the Freescale MPC52xx Programmable Serial
- 	  Controller in master SPI mode.
- 
-+config SPI_LOCOMO
-+	tristate "Locomo SPI master"
-+	depends on SPI_MASTER && SHARP_LOCOMO && EXPERIMENTAL
-+
- config SPI_MPC83xx
- 	tristate "Freescale MPC83xx/QUICC Engine SPI controller"
- 	depends on SPI_MASTER && (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
-Index: linux-2.6.26/drivers/spi/Makefile
-===================================================================
---- linux-2.6.26.orig/drivers/spi/Makefile	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/spi/Makefile	2008-10-17 18:15:31.463790519 +0200
-@@ -28,6 +28,7 @@
- obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
- obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
- obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
-+obj-$(CONFIG_SPI_LOCOMO)                += locomo_spi.o
- # 	... add above this line ...
- 
- # SPI protocol drivers (device/link on bus)
-Index: linux-2.6.26/drivers/spi/locomo_spi.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26/drivers/spi/locomo_spi.c	2008-10-17 18:15:31.471790439 +0200
-@@ -0,0 +1,1097 @@
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/stat.h>
-+#include <linux/delay.h>
-+#include <linux/wait.h>
-+#include <linux/interrupt.h>
-+#include <asm/hardware/locomo.h>
-+#include <asm/errno.h>
-+#include <linux/mmc/host.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/mmc_spi.h>
-+#include <linux/workqueue.h>
-+#include <linux/spinlock.h>
-+#include <linux/list.h>
-+#include "locomo_spi.h"
-+static struct locomospi_dev * spidev;
-+static struct work_struct transfer_wq;
-+int  delay;
-+
-+char* transtxbuf=(char*)NULL;
-+char* transrxbuf=(char*)NULL;
-+int transfercount=0, transfersize=0;
-+static DECLARE_WAIT_QUEUE_HEAD(transferqueue);
-+/* MMC_SPI functions *********************************************************/
-+
-+static int locomommcspi_init(struct device *dev, irqreturn_t (*isr)(int, void*), void *mmc)
-+{
-+	int result;
-+	result=request_irq(IRQ_LOCOMO_CARDDETECT, isr, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "locomo-spi",  mmc);
-+	return result;
-+}
-+
-+static void locomommcspi_exit(struct device *dev, void* mmc)
-+{
-+	free_irq(IRQ_LOCOMO_CARDDETECT, mmc);
-+}
-+
-+static int locomommcspi_getro(struct device *dev)
-+{
-+	return locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_WRITE_PROT) > 0 ? 1 : 0;
-+}
-+
-+static void locomommcspi_setpower(struct device *dev, unsigned int mask)
-+{
-+	if(!mask && spidev->card_power)
-+		locomospi_power(0);
-+	else if( !spidev->card_power )
-+		locomospi_power(1);
-+
-+}
-+
-+
-+static struct mmc_spi_platform_data colliemmc ={
-+	.init 		= locomommcspi_init,
-+	.exit 		= locomommcspi_exit,
-+	.detect_delay 	= 200,
-+	.get_ro 	= locomommcspi_getro,
-+	.ocr_mask 	= MMC_VDD_32_33 | MMC_VDD_33_34,
-+	.setpower	= locomommcspi_setpower,
-+	.powerup_msecs  = 200,
-+};
-+
-+/* Utility function **********************************************************/
-+
-+static void locomospi_power(int on)
-+{
-+	locomo_gpio_write(spidev->ldev->dev.parent, LOCOMO_GPIO_CARD_POWER, on);
-+	spidev->card_power=on;
-+	printk(KERN_DEBUG "locomospi: power %d\n",on);
-+}
-+
-+static void locomospi_setclock(unsigned int div, unsigned int clock)
-+{
-+	u16 r = ioread16(spidev->base+LOCOMO_SPIMD);
-+	div &= 0x7;
-+	clock &= 0x3;
-+	if(clock != spidev->clock_base || div != spidev->clock_div){
-+		r &= ~(LOCOMO_SPI_XSEL  | LOCOMO_SPI_CLKSEL | LOCOMO_SPI_XEN);
-+		iowrite16(r,spidev->base+LOCOMO_SPIMD);
-+		r |=  (div | (clock <<3) | LOCOMO_SPI_XEN);
-+		iowrite16(r,spidev->base+LOCOMO_SPIMD);
-+		spidev->clock_div = div;
-+		spidev->clock_base = clock;
-+		udelay(300);
-+	}
-+
-+}
-+// returns 1 if card ist present, 0 otherwise
-+static int locomospi_carddetect()
-+{
-+	return (locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_CARD_DETECT)>0)?0:1;
-+}
-+
-+static void locomospi_setcs(int high)
-+{
-+	u16 r;
-+	printk(KERN_DEBUG "locomospi: cs %d\n",high);
-+	r = ioread16(spidev->base + LOCOMO_SPICT);
-+	if(high)
-+		r |= LOCOMO_SPI_CS;
-+	else
-+		r &= ~LOCOMO_SPI_CS;
-+	iowrite16(r, spidev->base + LOCOMO_SPICT);
-+}
-+
-+static void locomospi_reg_open()
-+{
-+	u16 r;
-+	spidev->clock_div = DIV_64;
-+	spidev->clock_base = CLOCK_18MHZ;
-+	locomospi_power(1);
-+	msleep(100);
-+//	iowrite16( 0xec00 | (CLOCK_18MHZ <<3)|DIV_64, spidev->base+LOCOMO_SPIMD);
-+	iowrite16( LOCOMO_SPI_MSB1ST | LOCOMO_SPI_DOSTAT | LOCOMO_SPI_RCPOL | LOCOMO_SPI_TCPOL 
-+			|(CLOCK_18MHZ <<3) | DIV_64, spidev->base+LOCOMO_SPIMD);
-+//	if(locomospi_carddetect()){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16( r, spidev->base+LOCOMO_SPIMD);
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XEN;
-+		iowrite16( r, spidev->base+LOCOMO_SPIMD);
-+//	}
-+	iowrite16( LOCOMO_SPI_CS, spidev->base+LOCOMO_SPICT);
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r |= (LOCOMO_SPI_CEN | LOCOMO_SPI_RXUEN | LOCOMO_SPI_ALIGNEN);
-+	iowrite16( r, spidev->base+LOCOMO_SPICT);
-+	udelay(200);
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r &= ~LOCOMO_SPI_CS;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+}
-+
-+static void locomospi_reg_release()
-+{
-+	u16 r;
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r &= ~LOCOMO_SPI_CEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	r = ioread16(spidev->base+LOCOMO_SPIMD);
-+	r &= ~LOCOMO_SPI_XEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+	r = ioread16(spidev->base+LOCOMO_SPIMD);
-+	r &= ~LOCOMO_SPI_XON;
-+	iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r |= LOCOMO_SPI_XEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	locomospi_power(0);
-+}
-+#if 0
-+static int txrx(const char* txbuffer, char* rxbuffer, int size)
-+{
-+	u16 r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r |= LOCOMO_SPI_ALIGNEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	printk(KERN_DEBUG "locomospi: %d bytes to prozess\n",size);
-+	/* initialize global vars for isr */
-+	transfercount=0; transfersize=size; 
-+	transtxbuf=txbuffer; transrxbuf=rxbuffer;
-+
-+	/* start transmit and go sleep  isr will wake us*/
-+	enable_irq(IRQ_LOCOMO_SPI_TEND);
-+	iowrite8(txbuffer[0], spidev->base+LOCOMO_SPITD);
-+	wait_event(transferqueue, transfercount >= transfersize);
-+	disable_irq(IRQ_LOCOMO_SPI_TEND);
-+	transrxbuf=NULL; transtxbuf=NULL;
-+	
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r &= ~LOCOMO_SPI_ALIGNEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	int i;
-+	for(i=0; i< size; i++)
-+		printk(KERN_DEBUG "locomospi: sent: %x  received: %x \n",txbuffer[i], rxbuffer[i]);
-+	
-+	
-+	return size;
-+}
-+
-+
-+static int tx(const char* txbuffer, int size)
-+{
-+	printk(KERN_DEBUG "locomospi: %d bytes to send\n",size);
-+	/* initialize global vars for isr */
-+	transfercount=0; transfersize=size; 
-+	transtxbuf=txbuffer; 
-+
-+	/* start transmit and go sleep  isr will wake us*/
-+	enable_irq(IRQ_LOCOMO_SPI_RFW);
-+	iowrite8(txbuffer[0], spidev->base+LOCOMO_SPITD);
-+	wait_event(transferqueue, transfercount >= transfersize);
-+	disable_irq(IRQ_LOCOMO_SPI_RFW);
-+	transtxbuf=NULL;
-+	
-+	int i;
-+	for(i=0; i< size; i++)
-+		printk(KERN_DEBUG "locomospi: sent: %x\n",txbuffer[i]);
-+	
-+	
-+	return size;
-+}
-+
-+static int rx(char* rxbuffer, int size)
-+{
-+	printk(KERN_DEBUG "locomospi: %d bytes to read\n",size);
-+	/* initialize global vars for isr */
-+	transfercount=0; transfersize=size; 
-+	transrxbuf=rxbuffer;
-+
-+	/* start transmit and go sleep  isr will wake us*/
-+	enable_irq(IRQ_LOCOMO_SPI_RFR);
-+	rxbuffer[0]=ioread8(spidev->base+LOCOMO_SPIRD);
-+	wait_event(transferqueue, transfercount >= transfersize);
-+	disable_irq(IRQ_LOCOMO_SPI_RFR);
-+	transrxbuf=NULL;
-+	
-+	int i;
-+	for(i=0; i< size; i++)
-+		printk(KERN_DEBUG "locomospi: received: %x \n", rxbuffer[i]);
-+	
-+	
-+	return size;
-+}
-+
-+#else
-+static int txrx(const char* txbuffer, char* rxbuffer, int size)
-+{
-+	int i=0,j=0;
-+	int wait;
-+	u16 r;
-+/*	char * txback = kmalloc(size * sizeof(char), GFP_KERNEL);
-+	memcpy(txback, txbuffer, size);	
-+*/	
-+	if(spidev->clock_div == 4)
-+		wait = 0x10000;
-+	else
-+		wait = 8;
-+	
-+//	printk(KERN_DEBUG "locomospi: txrx %d bytes to prozess\n",size);
-+	
-+//	r = ioread16(spidev->base+LOCOMO_SPICT);
-+//	r |= LOCOMO_SPI_ALIGNEN;
-+//	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	//discard first bogus byte
-+
-+	ioread8(spidev->base+LOCOMO_SPIRD);
-+	for(i=0; i<size; i++){
-+		for(j=0; j <= wait; j++){
-+			if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW)
-+				break;
-+		}
-+		iowrite8(txbuffer[i], spidev->base+LOCOMO_SPITD);
-+		ndelay(delay);
-+		
-+		for(j=0; j <= wait; j++){
-+			if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFR)
-+				break;
-+		}
-+		rxbuffer[i] = ioread8(spidev->base+LOCOMO_SPIRD);
-+		ndelay(delay);
-+	}
-+//	r = ioread16(spidev->base+LOCOMO_SPICT);
-+//	r &= ~LOCOMO_SPI_ALIGNEN;
-+//	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	
-+/*	for(j=0; j< size; j++)
-+		printk(KERN_DEBUG "locomospi: sent: %x  received: %x \n",txback[j], rxbuffer[j]);
-+	
-+	kfree(txback);	
-+*/	return i;
-+}
-+
-+static int tx(const char* buffer, int size)
-+{
-+	int i=0,j=0;
-+	int wait;
-+	u16 r;
-+	if(spidev->clock_div == 4)
-+		wait = 0x10000;
-+	else
-+		wait = 8;
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r &= ~LOCOMO_SPI_ALIGNEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+
-+//	printk(KERN_DEBUG "locomospi: tx %d bytes to transmit\n",size);
-+	for(i=0; i<size; i++){
-+		for(j=0; j <= wait; j++){
-+			if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW)
-+				break;
-+		}
-+		iowrite8(buffer[i], spidev->base+LOCOMO_SPITD);
-+		ndelay(delay);
-+	}
-+
-+	for(j=0; j <= wait; j++){
-+		if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_TEND)
-+			break;
-+	}
-+	
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r |= LOCOMO_SPI_ALIGNEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	
-+//	for(j=0; j< size; j++)
-+//		printk(KERN_DEBUG "locomospi: sent: %x \n", buffer[j]);
-+//	printk(KERN_DEBUG "locomospi: tx %d bytes transmitted\n",i);
-+	return i;
-+}
-+
-+static int rx(char* buffer, int size)
-+{
-+	int i,j;
-+	int wait;
-+	u16 r; 	
-+	printk(KERN_DEBUG "locomospi: rx %d bytes to receive\n",size);
-+	if(spidev->clock_div == 4)
-+		wait = 0x10000;
-+	else
-+		wait = 8;
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r &= ~LOCOMO_SPI_ALIGNEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+
-+	for(i=0; i<size; i++){
-+
-+		for(j=0; j <= wait; j++){
-+			if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFR)
-+				break;
-+		}
-+		buffer[i]= ioread8(spidev->base+LOCOMO_SPIRD);
-+		ndelay(delay);
-+	}
-+	
-+	r = ioread16(spidev->base+LOCOMO_SPICT);
-+	r |= LOCOMO_SPI_ALIGNEN;
-+	iowrite16(r, spidev->base+LOCOMO_SPICT);
-+	
-+	for(j=0; j< size; j++)
-+		printk(KERN_DEBUG "locomospi: received: %x \n", buffer[j]);
-+	printk(KERN_DEBUG "locomospi: rx %d bytes received\n",i);
-+	return i;
-+}
-+#endif
-+/*
-+static irqreturn_t locomospi_rwready(int irq, void *dev_id)
-+{
-+	struct locomospi_dev* dev=(struct locomospi_dev*) dev_id;
-+//	dev_dbg(&spidev->sdev->dev, "IRQ: %d\n", irq);
-+//	printk(KERN_DEBUG "locomospi: IRQ: %d\n", irq);
-+	wake_up_interruptible(&dev->waitqueue);
-+	return IRQ_HANDLED;
-+}
-+*/
-+static irqreturn_t locomospi_testisr(int irq, void *dev_id)
-+{
-+	char *buf="";
-+	switch(irq){
-+		case IRQ_LOCOMO_SPI_RFR: buf="RFR";
-+					 break;
-+		case IRQ_LOCOMO_SPI_RFW: buf="RFW";
-+					 break;
-+		case IRQ_LOCOMO_SPI_REND:buf="REND";
-+					 break;
-+		case IRQ_LOCOMO_SPI_TEND:buf="TEND";
-+					 break;
-+		case IRQ_LOCOMO_CARDDETECT:
-+					 buf="CARD_DETECT";
-+					 break;
-+		default:		return IRQ_NONE;
-+	}
-+	printk(KERN_DEBUG "locomospi: IRQ: %s\n",buf);
-+//	dev_dbg(&spidev->sdev->dev, "IRQ: %s\n",buf);
-+	return IRQ_HANDLED;
-+}
-+static irqreturn_t locomospi_txrxisr(int irq, void *dev_id)
-+{
-+	if(transfercount < transfersize){
-+		transrxbuf[transfercount++] = ioread8(spidev->base+LOCOMO_SPIRD);
-+		iowrite8(transtxbuf[transfercount], spidev->base+LOCOMO_SPITD); 		
-+	}
-+	else{
-+		/* transfer complete. wake up txrx */
-+		wake_up(&transferqueue);
-+	}
-+	return IRQ_HANDLED;	
-+}	
-+
-+static irqreturn_t locomospi_txisr(int irq, void *dev_id)
-+{
-+	if(transfercount < transfersize){
-+		iowrite8(transtxbuf[transfercount++], spidev->base+LOCOMO_SPITD); 		
-+	}
-+	else{
-+		/* transfer complete. wake up txrx */
-+		wake_up(&transferqueue);
-+	}
-+	return IRQ_HANDLED;	
-+}	
-+
-+static irqreturn_t locomospi_rxisr(int irq, void *dev_id)
-+{
-+	if(transfercount < transfersize){
-+		transrxbuf[transfercount++] = ioread8(spidev->base+LOCOMO_SPIRD);
-+	}
-+	else{
-+		/* transfer complete. wake up txrx */
-+		wake_up(&transferqueue);
-+	}
-+	return IRQ_HANDLED;	
-+}	
-+
-+static void locomospi_clock(unsigned int Hz)
-+{
-+	u16 r;
-+	printk(KERN_DEBUG "locomospi: changing clock to: %d\n", Hz);
-+	if(Hz == 0){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r &= ~LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+	}
-+	else if(Hz >= 24576000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_1, CLOCK_25MHZ);
-+		delay=41;
-+	}
-+	else if(Hz >= 22579200){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_1, CLOCK_22MHZ);
-+		delay=45;
-+	}
-+	else if(Hz >= 18432000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_1, CLOCK_18MHZ);
-+		delay=55;
-+	}
-+	else if(Hz >= 12288000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_2, CLOCK_25MHZ);
-+		delay=82;
-+	}
-+	else if(Hz >= 11289600){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_2, CLOCK_22MHZ);
-+		delay=89;
-+	}
-+	else if(Hz >= 9216000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_2, CLOCK_18MHZ);
-+		delay=110;
-+	}
-+	else if(Hz >= 6144000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_4, CLOCK_25MHZ);
-+		delay=164;
-+	}
-+	else if(Hz >= 5644800){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_4, CLOCK_22MHZ);
-+		delay=178;
-+	}
-+	else if(Hz >= 4608000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_4, CLOCK_18MHZ);
-+		delay=218;
-+	}
-+	else if(Hz >= 3072000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_8, CLOCK_25MHZ);
-+		delay=327;
-+	}
-+	else if(Hz >= 2822400){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_8, CLOCK_22MHZ);
-+		delay=355;
-+	}
-+	else if(Hz >= 2304000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_8, CLOCK_18MHZ);
-+		delay=435;
-+	}
-+	else if(Hz >= 384000){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_64, CLOCK_25MHZ);
-+		delay=2605;
-+	}
-+	else if(Hz >= 352800){
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_64, CLOCK_22MHZ);
-+		delay=2834;
-+	}
-+	else{ /* set to 288 KHz */
-+		r = ioread16(spidev->base+LOCOMO_SPIMD);
-+		r |= LOCOMO_SPI_XON;
-+		iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+		locomospi_setclock(DIV_64, CLOCK_18MHZ);
-+		delay=3473;
-+	}
-+	spidev->clock = Hz;
-+}
-+
-+/* sysfs attributes used for debug *******************************************/
-+
-+/* SPI registers */
-+ssize_t locomospi_showspimd(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIMD));
-+}
-+
-+ssize_t locomospi_storespimd(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIMD);
-+	return count;
-+}
-+static DRIVER_ATTR(spimd, S_IWUSR | S_IRUGO, locomospi_showspimd, locomospi_storespimd);
-+
-+ssize_t locomospi_showspict(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPICT));
-+}
-+
-+ssize_t locomospi_storespict(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPICT);
-+	return count;
-+}
-+static DRIVER_ATTR(spict, S_IWUSR | S_IRUGO, locomospi_showspict, locomospi_storespict);
-+
-+ssize_t locomospi_showspist(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIST));
-+}
-+
-+ssize_t locomospi_storespist(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIST);
-+	return count;
-+}
-+static DRIVER_ATTR(spist, S_IWUSR | S_IRUGO, locomospi_showspist, locomospi_storespist);
-+
-+ssize_t locomospi_showspitd(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPITD));
-+}
-+
-+ssize_t locomospi_storespitd(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPITD);
-+	return count;
-+}
-+static DRIVER_ATTR(spitd, S_IWUSR | S_IRUGO, locomospi_showspitd, locomospi_storespitd);
-+
-+ssize_t locomospi_showspird(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIRD));
-+}
-+
-+ssize_t locomospi_storespird(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIRD);
-+	return count;
-+}
-+static DRIVER_ATTR(spird, S_IWUSR | S_IRUGO, locomospi_showspird, locomospi_storespird);
-+
-+ssize_t locomospi_showspits(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPITS));
-+}
-+
-+ssize_t locomospi_storespits(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPITS);
-+	return count;
-+}
-+static DRIVER_ATTR(spits, S_IWUSR | S_IRUGO, locomospi_showspits, locomospi_storespits);
-+
-+ssize_t locomospi_showspirs(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIRS));
-+}
-+
-+ssize_t locomospi_storespirs(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIRS);
-+	return count;
-+}
-+static DRIVER_ATTR(spirs, S_IWUSR | S_IRUGO, locomospi_showspirs, locomospi_storespirs);
-+
-+/* MMC Card status */
-+
-+ssize_t locomospi_showpower(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "%d\n", spidev->card_power);
-+}
-+
-+ssize_t locomospi_storepower(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	locomospi_power(simple_strtoul(buf, NULL, 10));
-+	return count;
-+}
-+static DRIVER_ATTR(cardpower, S_IWUSR | S_IRUGO, locomospi_showpower, locomospi_storepower);
-+
-+ssize_t locomospi_detectcard(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "%d\n",(locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_CARD_DETECT)>0)?0:1);
-+}
-+static DRIVER_ATTR(carddetect, S_IRUGO, locomospi_detectcard, NULL);
-+
-+ssize_t locomospi_writeprotect(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "%d\n",(locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_WRITE_PROT)>0)?1:0);
-+}
-+static DRIVER_ATTR(cardwriteprotect, S_IRUGO, locomospi_writeprotect, NULL);
-+
-+
-+ssize_t locomospi_showclock(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "%d\n", spidev->clock);
-+}
-+
-+ssize_t locomospi_storeclock(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	locomospi_clock(simple_strtoul(buf, NULL, 10));
-+	return count;
-+}
-+static DRIVER_ATTR(clock, S_IWUSR | S_IRUGO, locomospi_showclock, locomospi_storeclock);
-+
-+/* debug */
-+ssize_t locomospi_showdelay(struct device_driver *drv, char *buf)
-+{
-+	return sprintf(buf, "%d\n", delay);
-+}
-+
-+ssize_t locomospi_storedelay(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	delay=simple_strtoul(buf,NULL,10);
-+	return count;
-+}
-+static DRIVER_ATTR(delay, S_IWUSR | S_IRUGO, locomospi_showdelay, locomospi_storedelay);
-+
-+ssize_t locomospi_reset(struct device_driver *drv, const char *buf, size_t count)
-+{
-+	int choice = simple_strtoul(buf, NULL, 10);
-+	char   buff[100];
-+	u16 r; 
-+	switch(choice){
-+		case 0: locomospi_reg_release();
-+			schedule_timeout(2*HZ);
-+			locomospi_reg_open();
-+			break;
-+		case 1: {
-+				char b1[] = "\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff";
-+				char b2[] = "\xff\x40\x00\x00\x00\x00\x95\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff";
-+				locomospi_setcs(1);
-+				txrx(b1,b1,17);
-+				locomospi_setcs(0);
-+				txrx(b2,b2,18);
-+
-+			}
-+			break;
-+		case 2: locomospi_setcs(1);
-+			txrx("\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",buff,18);
-+			locomospi_setcs(0);
-+			txrx("\xff\x40\x00\x00\x00\x00\x95\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",buff,17);
-+			break;
-+		case 3: 
-+			r = ioread16(spidev->base+LOCOMO_SPIMD);
-+			r |= LOCOMO_SPI_LOOPBACK;
-+			iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+			txrx("X",buff,1);
-+			txrx("abcdefghijklmnopqrstuvwxyz1234567890",buff,36);
-+			txrx("Y",buff,1);
-+			udelay(100);
-+			txrx("Z",buff,1);
-+			schedule_timeout(HZ);	
-+			txrx("abcdefghijklmnopqrstuvwxyz1234567890",buff,36);
-+			
-+			r = ioread16(spidev->base+LOCOMO_SPIMD);
-+			r &= ~LOCOMO_SPI_LOOPBACK;
-+			iowrite16(r, spidev->base+LOCOMO_SPIMD);
-+			break;
-+		default: /* do nothing */;
-+	}
-+	return count;
-+}
-+static DRIVER_ATTR(reset, S_IWUSR, NULL, locomospi_reset);
-+
-+typedef struct locomo_reg_entry {
-+        u32 addr;
-+        char* name;
-+} locomo_reg_entry_t;
-+#define LCM     (sizeof(locomo_regs)/sizeof(locomo_reg_entry_t))
-+static locomo_reg_entry_t locomo_regs[] =
-+{
-+/*      { addr,    name,     description } */
-+        { 0x00, "VER" },
-+        { 0x04, "ST" },
-+        { 0x08, "C32K" },
-+        { 0x0C, "ICR" },
-+        { 0x10, "MCSX0" },
-+        { 0x14, "MCSX1" },
-+        { 0x18, "MCSX2" },
-+        { 0x1C, "MCSX3" },
-+        { 0x20, "ASD" },
-+        { 0x28, "HSD" },
-+        { 0x2C, "HSC" },
-+        { 0x30, "TADC" },
-+        { 0x38, "TC" },
-+        { 0x3C, "CPSD" },
-+        { 0x40, "KIB" },
-+        { 0x44, "KSC" },
-+        { 0x48, "KCMD" },
-+        { 0x4C, "KIC" },
-+        { 0x54, "ACC" },
-+        { 0x60, "SPIMD" },
-+        { 0x64, "SPICT" },
-+        { 0x68, "SPIST" },
-+        { 0x70, "SPIIS" },
-+        { 0x74, "SPIWE" },
-+        { 0x78, "SPIIE" },
-+        { 0x7C, "SPIIR" },
-+        { 0x80, "SPITD" },
-+        { 0x84, "SPIRD" },
-+        { 0x88, "SPITS" },
-+        { 0x8C, "SPIRS" },
-+        { 0x90, "GPD" },
-+        { 0x94, "GPE" },
-+        { 0x98, "GPL" },
-+        { 0x9C, "GPO" },
-+        { 0xa0, "GRIE" },
-+        { 0xa4, "GFIE" },
-+        { 0xa8, "GIS" },
-+        { 0xac, "GWE" },
-+        { 0xb0, "GIE" },
-+        { 0xb4, "GIR" },
-+        { 0xc8, "ALC" },
-+        { 0xcc, "ALR" },
-+        { 0xd0, "PAIF" },
-+        { 0xd8, "LTC" },
-+        { 0xdc, "LTINT" },
-+        { 0xe0, "DAC" },
-+        { 0xe8, "LPT0" },
-+        { 0xec, "LPT1" },
-+        { 0xfc, "TCR" },
-+};
-+
-+static ssize_t lcm_show(struct device *dev, struct device_attribute *attr, char *buf)
-+{
-+	int base = spidev->base - LOCOMO_SPI; 
-+	char b[4000]="";
-+	char c[30];
-+	int i;
-+	for(i=0; i<LCM; i++){
-+		sprintf(c,"%s:\t\t 0x%x\n",locomo_regs[i].name, ioread16(base + locomo_regs[i].addr));
-+		strcat(b,c);
-+	}
-+	return sprintf(buf,"%s",b);
-+}
-+
-+static DRIVER_ATTR(regs, 0444, lcm_show, NULL);
-+
-+
-+/* SPI functions *************************************************************/
-+
-+static void locomospi_do_transfer(struct work_struct *wrk)
-+{
-+	struct list_head *mptr, *tptr, *mptr2;
-+	struct spi_transfer *entry;
-+	struct spi_message *msg;
-+
-+	list_for_each_safe(mptr, mptr2, &spidev->message_list){
-+		msg = list_entry(mptr, struct spi_message, queue);
-+
-+		msg->status = 0;
-+		msg->actual_length = 0;
-+		list_for_each(tptr, &msg->transfers){
-+			entry = list_entry(tptr, struct spi_transfer, transfer_list);
-+			if(entry->tx_buf && entry->rx_buf){ //duplex
-+				txrx((char*) entry->tx_buf, (char*) entry->rx_buf, entry->len);				
-+				msg->actual_length += entry->len;
-+			} else if(entry->tx_buf && !entry->rx_buf){ //write
-+				tx((char*) entry->tx_buf, entry->len);
-+				msg->actual_length += entry->len;
-+			} else if(!entry->tx_buf && entry->rx_buf){ //read
-+				rx((char*) entry->rx_buf, entry->len);
-+				msg->actual_length += entry->len;
-+			} else if(!entry->tx_buf && !entry->rx_buf){ //error
-+				dev_err(&spidev->sdev->dev, "do_transfer: no buffers allocated\n");
-+				msg->status = -EFAULT;
-+			}
-+		}
-+		spin_lock(&spidev->message_lock);
-+		list_del(mptr);
-+		spin_unlock(&spidev->message_lock);
-+		msg->complete(msg->context);
-+	}
-+}
-+
-+static int locomospi_setup(struct spi_device *spi)
-+{
-+	if((spi->mode & SPI_CS_HIGH) != (spidev->spimode & SPI_CS_HIGH)) 
-+		locomospi_setcs(spi->mode & SPI_CS_HIGH ? 1 : 0 );
-+	if(spidev->clock != spi->max_speed_hz){
-+		locomospi_clock(spi->max_speed_hz);
-+	}
-+	spidev->spimode = spi->mode;
-+
-+	return 0;
-+}
-+
-+static int locomospi_transfer(struct spi_device *spi, struct spi_message *msg)
-+{
-+
-+	spin_lock(&spidev->message_lock);
-+	list_add_tail(&msg->queue, &spidev->message_list);
-+	spin_unlock(&spidev->message_lock);
-+	schedule_work(&transfer_wq);
-+	return 0;
-+}
-+
-+static struct locomo_driver locomo_spi_driver = {
-+	.drv = {
-+		.name = "locomo-spi",
-+	},
-+	.devid	= LOCOMO_DEVID_SPI,
-+	.probe	= locomospi_probe,
-+	.remove	= locomospi_remove,
-+#ifdef CONFIG_PM
-+	.suspend = locomospi_suspend,
-+	.resume = locomospi_resume,
-+#endif
-+};
-+
-+static struct spi_board_info board = {
-+	.modalias 	= "mmc_spi",
-+	.platform_data 	= (void*) &colliemmc,
-+	.controller_data= NULL,
-+	.irq		= 0,
-+	.max_speed_hz	= 25000000,
-+	.bus_num	= 0,
-+	.chip_select	= 0,
-+	.mode		= 0,
-+};
-+
-+#ifdef CONFIG_PM
-+static int locomospi_suspend(struct locomo_dev *dev, pm_message_t state)
-+{
-+	disable_irq(IRQ_LOCOMO_CARDDETECT);
-+	return 0;
-+}
-+
-+static int locomospi_resume(struct locomo_dev *dev)
-+{
-+	enable_irq(IRQ_LOCOMO_CARDDETECT);
-+	return 0;
-+}
-+#endif
-+
-+static int locomospi_probe(struct locomo_dev *dev)
-+{
-+	int result=0;
-+	printk(KERN_DEBUG "Collie MMC over SPI Driver\n");
-+	spidev=kmalloc(sizeof(struct locomospi_dev),GFP_KERNEL);
-+	if(!spidev){
-+		return -ENOMEM;
-+	}
-+	spidev->ldev = dev;
-+	spidev->card_power = 1;
-+	spidev->spimode = 0;
-+
-+	if(!request_mem_region((unsigned long) dev->mapbase, dev->length, LOCOMO_DRIVER_NAME(dev))) {
-+		dev_err(&dev->dev, " Can't aquire access to io memory\n");
-+		return -EBUSY;
-+	}
-+	spidev->base=(unsigned long) dev->mapbase;
-+	locomospi_reg_open();
-+
-+	locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_CARD_POWER, 0);
-+	locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_CARD_DETECT, 1);
-+	locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_WRITE_PROT, 1);
-+
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_cardpower);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_carddetect);
-+	if(result){
-+		dev_err(&dev->dev,"error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_cardwriteprotect);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spimd);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spict);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spist);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spitd);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spird);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spits);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spirs);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_clock);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_delay);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_reset);
-+	if(result){
-+		dev_err(&dev->dev, "error creating driver attribute\n");
-+		goto region;
-+	}
-+	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_regs);
-+        if(result){
-+                dev_err(&dev->dev, "error creating driver attribute\n");
-+                goto region;
-+        }
-+	INIT_WORK(&transfer_wq, locomospi_do_transfer);
-+	INIT_LIST_HEAD(&spidev->message_list);
-+	spin_lock_init(&spidev->message_lock);
-+	init_waitqueue_head(&spidev->waitqueue);
-+	spidev->master=spi_alloc_master(&dev->dev,0);
-+	if(!spidev->master){
-+		result=-ENOMEM;
-+		goto region;
-+	}
-+	spidev->master->bus_num = 0;
-+	spidev->master->num_chipselect = 1;
-+	spidev->master->setup = locomospi_setup;
-+	spidev->master->transfer = locomospi_transfer;
-+	spidev->sdev = spi_new_device(spidev->master, &board);
-+	if(!spidev->sdev){
-+		dev_err(&dev->dev, "failed to register spi device\n");
-+		result = -EINVAL;
-+		goto master;
-+	}
-+/*	result=request_irq(IRQ_LOCOMO_SPI_RFR, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev);
-+	if(result) {
-+		dev_err(&dev->dev, "Could not get IRQ: RFR\n");
-+		goto regdev;
-+	}
-+	//disable_irq(IRQ_LOCOMO_SPI_RFR);
-+*//*	result=request_irq(IRQ_LOCOMO_SPI_RFW, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev);
-+	if(result) {
-+		dev_err(&dev->dev, "Could not get IRQ: RFW\n");
-+		goto irq1;
-+	}
-+	//disable_irq(IRQ_LOCOMO_SPI_RFW);
-+*//*	result=request_irq(IRQ_LOCOMO_SPI_REND, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev);
-+	if(result) {
-+		dev_err(&dev->dev, "Could not get IRQ: REND\n");
-+		goto irq2;
-+	}
-+*//*	result=request_irq(IRQ_LOCOMO_SPI_TEND, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev);
-+	if(result) {
-+		dev_err(&dev->dev, "Could not get IRQ: TEND\n");
-+		goto irq3;
-+	}
-+	//disable_irq(IRQ_LOCOMO_SPI_TEND);	
-+*/	spidev->workqueue = create_singlethread_workqueue("locomo-spi");
-+	if(!spidev->workqueue){
-+		dev_err(&dev->dev, "failed to create workqueue\n");
-+		goto irq4;
-+	}
-+	result=spi_register_master(spidev->master);
-+	if(result){
-+		dev_err(&dev->dev, "failed to register spimaster\n");
-+		goto wq;
-+	}
-+	return 0;
-+wq:
-+	destroy_workqueue(spidev->workqueue);
-+irq4:
-+//	free_irq(IRQ_LOCOMO_SPI_TEND, (void*) spidev);
-+irq3:
-+//	free_irq(IRQ_LOCOMO_SPI_REND, (void*) spidev);
-+irq2:
-+//	free_irq(IRQ_LOCOMO_SPI_RFW, (void*) spidev);
-+irq1:
-+//	free_irq(IRQ_LOCOMO_SPI_RFR, (void*) spidev);
-+regdev:
-+	spi_unregister_device(spidev->sdev);
-+master:
-+	spi_master_put(spidev->master);
-+region:
-+	release_mem_region((unsigned long) dev->mapbase, dev->length);
-+	kfree(spidev);
-+	return result;
-+
-+}
-+
-+static int locomospi_remove(struct locomo_dev *dev)
-+{
-+	spi_unregister_device(spidev->sdev);
-+	spi_unregister_master(spidev->master);
-+	destroy_workqueue(spidev->workqueue);
-+	locomospi_reg_release();
-+//	free_irq(IRQ_LOCOMO_SPI_TEND, (void*) spidev);
-+//	free_irq(IRQ_LOCOMO_SPI_REND, (void*) spidev);
-+//	free_irq(IRQ_LOCOMO_SPI_RFW, (void*) spidev);
-+//	free_irq(IRQ_LOCOMO_SPI_RFR, (void*) spidev);
-+	spi_master_put(spidev->master);
-+	release_mem_region((unsigned long) dev->mapbase, dev->length);
-+	kfree(spidev);
-+	return 0;
-+}
-+
-+
-+
-+static int __init locomospi_init(void)
-+{
-+	int ret = locomo_driver_register(&locomo_spi_driver);
-+	if (ret)
-+		return ret;
-+
-+
-+	return 0;
-+}
-+
-+static void __exit locomospi_exit(void)
-+{
-+	locomo_driver_unregister(&locomo_spi_driver);
-+}
-+
-+module_init(locomospi_init);
-+module_exit(locomospi_exit);
-+
-+MODULE_AUTHOR("Thomas Kunze thommy@tabao.de");
-+MODULE_DESCRIPTION("Collie mmc driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26/drivers/spi/locomo_spi.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26/drivers/spi/locomo_spi.h	2008-10-17 18:15:31.471790439 +0200
-@@ -0,0 +1,75 @@
-+#include <asm/hardware/locomo.h>
-+#ifndef __LOCOMO_SPI_H__
-+#define __LOCOMO_SPI_H__
-+
-+/* locomo-spi status register LOCOMO_SPIST */
-+#define LOCOMO_SPI_TEND (1 << 3)        /* Transfer end bit */
-+#define LOCOMO_SPI_REND (1 << 2)        /* Receive end bit */
-+#define LOCOMO_SPI_RFW  (1 << 1)        /* write buffer bit */
-+#define LOCOMO_SPI_RFR  (1)             /* read buffer bit */
-+
-+/* locomo-spi mode register LOCOMO_SPIMD */
-+#define LOCOMO_SPI_LOOPBACK (1 << 15)	/* loopback tx to rx 	*/
-+#define LOCOMO_SPI_MSB1ST   (1 << 14)	/* send MSB first 	*/
-+#define LOCOMO_SPI_DOSTAT   (1 << 13)	/* transmit line is idle high */
-+#define LOCOMO_SPI_TCPOL    (1 << 11) 	/* transmit CPOL (maybe affects CPHA too) */
-+#define LOCOMO_SPI_RCPOL    (1 << 10)	/* receive CPOL (maybe affects CPHA too) */
-+#define	LOCOMO_SPI_TDINV    (1 << 9)	/* invert transmit line */
-+#define LOCOMO_SPI_RDINV    (1 << 8)	/* invert receive line */
-+#define LOCOMO_SPI_XON	    (1 << 7)	/* enable spi controller clock */
-+#define LOCOMO_SPI_XEN	    (1 << 6)	/* clock bit write enable xon must be off, wait 300 us before xon->1 */ 
-+#define LOCOMO_SPI_XSEL	    0x0018 	/* clock select 		*/
-+#define CLOCK_18MHZ	    0		/* 18,432 MHz clock 	*/
-+#define CLOCK_22MHZ	    1		/* 22,5792 MHz clock	*/
-+#define CLOCK_25MHZ	    2		/* 24,576 MHz clock	*/
-+#define LOCOMO_SPI_CLKSEL   0x7	
-+#define DIV_1		    0		/* don't divide clock   */
-+#define DIV_2		    1		/* divide clock by two	*/
-+#define DIV_4		    2		/* divide clock by four */
-+#define DIV_8		    3		/* divide clock by eight*/
-+#define DIV_64		    4		/* divide clock by 64 */
-+
-+/* locomo-spi control register LOCOMO_SPICT */
-+#define LOCOMO_SPI_CRC16_7_B 	(1 << 15) 	/* 0: crc16 1: crc7 */
-+#define LOCOMO_SPI_CRCRX_TX_B	(1 << 14)
-+#define LOCOMO_SPI_CRCRESET_B	(1 << 13)
-+#define LOCOMO_SPI_CEN		(1 << 7)	/* ?? enable */
-+#define LOCOMO_SPI_CS		(1 << 6)	/* chip select */
-+#define LOCOMO_SPI_UNIT16	(1 << 5) 	/* 0: 8 bit units, 1: 16 bit unit */
-+#define LOCOMO_SPI_ALIGNEN	(1 << 2)	/* align transfer enable */
-+#define LOCOMO_SPI_RXWEN	(1 << 1)	/* continous receive */
-+#define LOCOMO_SPI_RXUEN	(1 << 0)	/* aligned receive */
-+
-+#define IRQ_LOCOMO_CARDDETECT	IRQ_LOCOMO_GPIO13
-+
-+
-+struct locomospi_dev {
-+	struct locomo_dev *ldev;
-+	struct spi_master *master;
-+	struct spi_device *sdev;
-+	int card_power;
-+	int clock_base;
-+	int clock_div;
-+	int clock;
-+	unsigned long base;
-+	u8 spimode;
-+	wait_queue_head_t waitqueue;
-+	struct workqueue_struct *workqueue;
-+	struct list_head message_list;
-+	spinlock_t message_lock;
-+};
-+
-+
-+static irqreturn_t 	locomospi_cardisr(int, void*);
-+static int 	locomospi_probe(struct locomo_dev*);
-+static int 	locomospi_remove(struct locomo_dev*);
-+static int 	locomospi_carddetect(void);
-+static void 	locomospi_reg_open(void);
-+static void	locomospi_reg_release(void);
-+static int 	tx(const char*, int);
-+static int 	rx(char *, int);
-+static void 	locomospi_power(int on);
-+static int locomospi_suspend(struct locomo_dev *dev, pm_message_t state);
-+static int locomospi_resume(struct locomo_dev *dev);
-+static void locomospi_setcs(int high);
-+#endif
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/collie/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/collie/defconfig
deleted file mode 100644
index 128fe03c51..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/collie/defconfig
+++ /dev/null
@@ -1,804 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Sat Oct 18 23:52:11 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-CONFIG_SA1100_COLLIE=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,115200n8 console=tty1 mem=64M fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_SHARP=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_PROC_FS is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_LOCOMO=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_SPI=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/collie_keymap.patch b/packages/kexecboot/linux-kexecboot-2.6.26/collie_keymap.patch
deleted file mode 100644
index 648821f577..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/collie_keymap.patch
+++ /dev/null
@@ -1,420 +0,0 @@
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
-Index: linux-2.6.26/drivers/char/defkeymap.map
-===================================================================
---- linux-2.6.26.orig/drivers/char/defkeymap.map	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/char/defkeymap.map	2008-07-24 22:09:38.663284352 +0200
-@@ -1,264 +1,170 @@
--# Default kernel keymap. This uses 7 modifier combinations.
--keymaps 0-2,4-5,8,12
--# Change the above line into
--#	keymaps 0-2,4-6,8,12
--# in case you want the entries
--#	altgr   control keycode  83 = Boot            
--#	altgr   control keycode 111 = Boot            
--# below.
--#
--# In fact AltGr is used very little, and one more keymap can
--# be saved by mapping AltGr to Alt (and adapting a few entries):
--# keycode 100 = Alt
--#
--keycode   1 = Escape           Escape          
--	alt     keycode   1 = Meta_Escape     
--keycode   2 = one              exclam          
--	alt     keycode   2 = Meta_one        
--keycode   3 = two              at               at              
--	control	keycode   3 = nul             
--	shift	control	keycode   3 = nul             
--	alt	keycode   3 = Meta_two        
--keycode   4 = three            numbersign      
--	control keycode   4 = Escape          
--	alt     keycode   4 = Meta_three      
--keycode   5 = four             dollar           dollar          
--	control keycode   5 = Control_backslash
--	alt     keycode   5 = Meta_four       
--keycode   6 = five             percent         
--	control keycode   6 = Control_bracketright
--	alt     keycode   6 = Meta_five       
--keycode   7 = six              asciicircum     
--	control keycode   7 = Control_asciicircum
--	alt     keycode   7 = Meta_six        
--keycode   8 = seven            ampersand        braceleft       
--	control keycode   8 = Control_underscore
--	alt     keycode   8 = Meta_seven      
--keycode   9 = eight            asterisk         bracketleft     
--	control keycode   9 = Delete          
--	alt     keycode   9 = Meta_eight      
--keycode  10 = nine             parenleft        bracketright    
--	alt     keycode  10 = Meta_nine       
--keycode  11 = zero             parenright       braceright      
--	alt     keycode  11 = Meta_zero       
--keycode  12 = minus            underscore       backslash       
--	control	keycode  12 = Control_underscore
--	shift	control	keycode  12 = Control_underscore
--	alt	keycode  12 = Meta_minus      
--keycode  13 = equal            plus            
--	alt     keycode  13 = Meta_equal      
--keycode  14 = Delete           Delete          
--	control keycode  14 = BackSpace
--	alt     keycode  14 = Meta_Delete     
-+# Note:
-+# The way in which the modifiers are handled are quite different
-+# than how they were handled in the 2.4.6-rmk1-np2-embedix kernel.
-+# 
-+# Here, we simply pass up Fn as Control, and the german accent key
-+# as Altgr, and simply use a proper keymap.  Said keymap is as
-+# follows.
-+# keymaps 0-2,4-5,8,12,20
-+keycode  14 = BackSpace
-+	shift   keycode  14 = BackSpace
-+	control keycode  14 = Delete
-+	shiftl  control keycode  14 = bracketleft
-+	control shiftr  keycode  14 = bracketleft
- keycode  15 = Tab              Tab             
--	alt     keycode  15 = Meta_Tab        
-+	shift   keycode  15 = backslash
-+	control keycode  15 = Caps_Lock
-+	shiftl  control keycode  15 = Caps_Lock
-+	control shiftr  keycode  15 = Caps_Lock
- keycode  16 = q               
-+	control	keycode  16 = one             
-+	shiftl	control	keycode  16 = Control_q       
-+	control	shiftr	keycode  16 = Meta_q       
- keycode  17 = w               
--keycode  18 = e
--	altgr   keycode  18 = Hex_E   
-+	control	keycode  17 = two       
-+	shiftl	control	keycode  17 = Control_w       
-+	control	shiftr	keycode  17 = Meta_w       
-+keycode  18 = e               
-+	control	keycode  18 = three       
-+	shiftl	control	keycode  18 = Control_e       
-+	control	shiftr	keycode  18 = Meta_e       
- keycode  19 = r               
-+	control	keycode  19 = four       
-+	shiftr	control	keycode  19 = Control_r       
-+	control	shiftl	keycode  19 = Meta_r       
- keycode  20 = t               
-+	control	keycode  20 = five       
-+	shiftl	control	keycode  20 = Control_t       
-+	control	shiftr	keycode  20 = Meta_t       
- keycode  21 = y               
-+	control	keycode  21 = six       
-+	shiftl	control	keycode  21 = Control_y       
-+	control	shiftr	keycode  21 = Meta_y       
- keycode  22 = u               
-+	control	keycode  22 = seven       
-+	shiftl	control	keycode  22 = Control_u       
-+	control	shiftr	keycode  22 = Meta_u       
- keycode  23 = i               
-+	control	keycode  23 = eight             
-+	shiftl	control	keycode  23 = Control_i             
-+	control	shiftr	keycode  23 = Meta_i             
- keycode  24 = o               
-+	control	keycode  24 = nine       
-+	shiftl	control	keycode  24 = Control_o       
-+	control	shiftr	keycode  24 = Meta_o       
- keycode  25 = p               
--keycode  26 = bracketleft      braceleft       
--	control keycode  26 = Escape          
--	alt     keycode  26 = Meta_bracketleft
--keycode  27 = bracketright     braceright       asciitilde      
--	control keycode  27 = Control_bracketright
--	alt     keycode  27 = Meta_bracketright
-+	control	keycode  25 = zero       
-+	shiftl	control	keycode  25 = Control_p       
-+	control	shiftr	keycode  25 = Meta_p       
- keycode  28 = Return          
--	alt     keycode  28 = Meta_Control_m  
-+	control keycode  28 = greater
-+	shiftl  control keycode  28 = braceright
-+	control shiftr  keycode  28 = braceright
- keycode  29 = Control         
--keycode  30 = a
--	altgr   keycode  30 = Hex_A
-+keycode  30 = a               
-+	control	keycode  30 = exclam       
-+	shiftl	control	keycode  30 = Control_a       
-+	control	shiftr	keycode  30 = Meta_a       
- keycode  31 = s               
--keycode  32 = d
--	altgr   keycode  32 = Hex_D   
--keycode  33 = f
--	altgr   keycode  33 = Hex_F               
-+	control	keycode  31 = at       
-+	shiftl	control	keycode  31 = Control_s       
-+	control	shiftr	keycode  31 = Meta_s       
-+keycode  32 = d               
-+	control	keycode  32 = numbersign
-+	shiftl	control	keycode  32 = Control_d       
-+	control	shiftr	keycode  32 = Meta_d       
-+keycode  33 = f               
-+	control	keycode  33 = dollar       
-+	shiftl	control	keycode  33 = Control_f       
-+	control	shiftr	keycode  33 = Meta_f       
- keycode  34 = g               
-+	control	keycode  34 = percent       
-+	shiftl	control	keycode  34 = Control_g       
-+	control	shiftr	keycode  34 = Meta_g       
- keycode  35 = h               
-+	control	keycode  35 = underscore       
-+	shiftl	control	keycode  35 = BackSpace       
-+	control	shiftr	keycode  35 = BackSpace       
- keycode  36 = j               
-+	control	keycode  36 = ampersand        
-+	shiftl	control	keycode  36 = Linefeed        
-+	control	shiftr	keycode  36 = Linefeed        
- keycode  37 = k               
-+	control	keycode  37 = asterisk       
-+	shiftl	control	keycode  37 = Control_k       
-+	control	shiftr	keycode  37 = Meta_k       
- keycode  38 = l               
--keycode  39 = semicolon        colon           
--	alt     keycode  39 = Meta_semicolon  
--keycode  40 = apostrophe       quotedbl        
--	control keycode  40 = Control_g       
--	alt     keycode  40 = Meta_apostrophe 
--keycode  41 = grave            asciitilde      
--	control keycode  41 = nul             
--	alt     keycode  41 = Meta_grave      
-+	control	keycode  38 = bracketleft       
-+	shiftl  control keycode  51 = parenleft
-+	control shiftr  keycode  51 = parenleft
-+keycode  40 = apostrophe       quotedbl
-+	control	keycode  40 = asciitilde       
-+	shiftl	control	keycode  40 = asciicircum
-+	control	shiftr	keycode  40 = asciicircum       
- keycode  42 = Shift           
--keycode  43 = backslash        bar             
--	control keycode  43 = Control_backslash
--	alt     keycode  43 = Meta_backslash  
- keycode  44 = z               
-+	control	keycode  44 = Control_z       
-+	shiftl	control	keycode  44 = Control_z       
-+	control	shiftr	keycode  44 = Meta_z       
- keycode  45 = x               
--keycode  46 = c
--	altgr   keycode  46 = Hex_C   
-+	control	keycode  45 = Control_x       
-+	shiftl	control	keycode  45 = Control_x       
-+	control	shiftr	keycode  45 = Meta_x       
-+keycode  46 = c               
-+	control	keycode  46 = Control_c       
-+	shiftl	control	keycode  46 = Control_c       
-+	control	shiftr	keycode  46 = Meta_c       
- keycode  47 = v               
--keycode  48 = b
--	altgr   keycode  48 = Hex_B
-+	control	keycode  47 = Control_v       
-+	shiftl	control	keycode  47 = Control_v       
-+	control	shiftr	keycode  47 = Meta_v       
-+## current location ##
-+keycode  48 = b               
-+	control	keycode  48 = minus       
-+	shiftl	control	keycode  48 = Control_b       
-+	control	shiftr	keycode  48 = Meta_b       
- keycode  49 = n               
-+	control	keycode  49 = plus       
-+	shiftl	control	keycode  49 = Control_n       
-+	control	shiftr	keycode  49 = Meta_n       
- keycode  50 = m               
--keycode  51 = comma            less            
--	alt     keycode  51 = Meta_comma      
--keycode  52 = period           greater         
--	control keycode  52 = Compose         
--	alt     keycode  52 = Meta_period     
--keycode  53 = slash            question        
--	control keycode  53 = Delete          
--	alt     keycode  53 = Meta_slash      
--keycode  54 = Shift           
-+	control	keycode  50 = equal       
-+	shiftl	control	keycode  50 = Control_m       
-+	control	shiftr	keycode  50 = Meta_m       
-+keycode  51 = comma
-+	shift   keycode  51 = semicolon
-+	control keycode  51 = bracketright
-+	shiftl  control keycode  51 = parenright
-+	control shiftr  keycode  51 = parenright
-+keycode  52 = period
-+	shift   keycode  52 = colon
-+	control keycode  52 = less
-+	shiftl  control keycode  52 = braceleft
-+	control shiftr  keycode  52 = braceleft
-+keycode  53 = slash
-+	shift   keycode  53 = question
-+	control	keycode  53 = Num_Lock
-+	shiftl  control keycode  53 = Num_Lock
-+	control shiftr  keycode  53 = Num_Lock
-+keycode  54 = AltGr
- keycode  55 = KP_Multiply     
- keycode  56 = Alt             
--keycode  57 = space            space           
--	control keycode  57 = nul             
--	alt     keycode  57 = Meta_space      
--keycode  58 = Caps_Lock       
--keycode  59 = F1               F11              Console_13      
--	control keycode  59 = F1              
--	alt     keycode  59 = Console_1       
--	control alt     keycode  59 = Console_1       
--keycode  60 = F2               F12              Console_14      
--	control keycode  60 = F2              
--	alt     keycode  60 = Console_2       
--	control alt     keycode  60 = Console_2       
--keycode  61 = F3               F13              Console_15      
--	control keycode  61 = F3              
--	alt     keycode  61 = Console_3       
--	control alt     keycode  61 = Console_3       
--keycode  62 = F4               F14              Console_16      
--	control keycode  62 = F4              
--	alt     keycode  62 = Console_4       
--	control alt     keycode  62 = Console_4       
--keycode  63 = F5               F15              Console_17      
--	control keycode  63 = F5              
--	alt     keycode  63 = Console_5       
--	control alt     keycode  63 = Console_5       
--keycode  64 = F6               F16              Console_18      
--	control keycode  64 = F6              
--	alt     keycode  64 = Console_6       
--	control alt     keycode  64 = Console_6       
--keycode  65 = F7               F17              Console_19      
--	control keycode  65 = F7              
--	alt     keycode  65 = Console_7       
--	control alt     keycode  65 = Console_7       
--keycode  66 = F8               F18              Console_20      
--	control keycode  66 = F8              
--	alt     keycode  66 = Console_8       
--	control alt     keycode  66 = Console_8       
--keycode  67 = F9               F19              Console_21      
--	control keycode  67 = F9              
--	alt     keycode  67 = Console_9       
--	control alt     keycode  67 = Console_9       
--keycode  68 = F10              F20              Console_22      
--	control keycode  68 = F10             
--	alt     keycode  68 = Console_10      
--	control alt     keycode  68 = Console_10      
--keycode  69 = Num_Lock
--	shift   keycode  69 = Bare_Num_Lock
--keycode  70 = Scroll_Lock      Show_Memory      Show_Registers  
--	control keycode  70 = Show_State      
--	alt     keycode  70 = Scroll_Lock     
--keycode  71 = KP_7            
--	alt     keycode  71 = Ascii_7         
--	altgr   keycode  71 = Hex_7         
--keycode  72 = KP_8            
--	alt     keycode  72 = Ascii_8         
--	altgr   keycode  72 = Hex_8         
--keycode  73 = KP_9            
--	alt     keycode  73 = Ascii_9         
--	altgr   keycode  73 = Hex_9         
--keycode  74 = KP_Subtract     
--keycode  75 = KP_4            
--	alt     keycode  75 = Ascii_4         
--	altgr   keycode  75 = Hex_4         
--keycode  76 = KP_5            
--	alt     keycode  76 = Ascii_5         
--	altgr   keycode  76 = Hex_5         
--keycode  77 = KP_6            
--	alt     keycode  77 = Ascii_6         
--	altgr   keycode  77 = Hex_6         
--keycode  78 = KP_Add          
--keycode  79 = KP_1            
--	alt     keycode  79 = Ascii_1         
--	altgr   keycode  79 = Hex_1         
--keycode  80 = KP_2            
--	alt     keycode  80 = Ascii_2         
--	altgr   keycode  80 = Hex_2         
--keycode  81 = KP_3            
--	alt     keycode  81 = Ascii_3         
--	altgr   keycode  81 = Hex_3         
--keycode  82 = KP_0            
--	alt     keycode  82 = Ascii_0         
--	altgr   keycode  82 = Hex_0         
--keycode  83 = KP_Period       
--#	altgr   control keycode  83 = Boot            
--	control alt     keycode  83 = Boot            
--keycode  84 = Last_Console    
--keycode  85 =
--keycode  86 = less             greater          bar             
--	alt     keycode  86 = Meta_less       
--keycode  87 = F11              F11              Console_23      
--	control keycode  87 = F11             
--	alt     keycode  87 = Console_11      
--	control alt     keycode  87 = Console_11      
--keycode  88 = F12              F12              Console_24      
--	control keycode  88 = F12             
--	alt     keycode  88 = Console_12      
--	control alt     keycode  88 = Console_12      
--keycode  89 =
--keycode  90 =
--keycode  91 =
--keycode  92 =
--keycode  93 =
--keycode  94 =
--keycode  95 =
--keycode  96 = KP_Enter        
--keycode  97 = Control         
--keycode  98 = KP_Divide       
-+keycode  57 = space
-+	shift   keycode  57 = bar
-+	control	keycode  57 = nul
-+	shiftl  control keycode  57 = grave
-+	control shiftr  keycode  57 = grave
-+keycode  67 = Control
-+keycode  87 = Return
- keycode  99 = Control_backslash
- 	control keycode  99 = Control_backslash
--	alt     keycode  99 = Control_backslash
- keycode 100 = AltGr           
--keycode 101 = Break           
--keycode 102 = Find            
- keycode 103 = Up              
--keycode 104 = Prior           
--	shift   keycode 104 = Scroll_Backward 
- keycode 105 = Left            
--	alt     keycode 105 = Decr_Console
- keycode 106 = Right           
--	alt     keycode 106 = Incr_Console
- keycode 107 = Select          
- keycode 108 = Down            
--keycode 109 = Next            
--	shift   keycode 109 = Scroll_Forward  
--keycode 110 = Insert          
--keycode 111 = Remove          
--#	altgr   control keycode 111 = Boot            
--	control alt     keycode 111 = Boot            
--keycode 112 = Macro           
--keycode 113 = F13             
--keycode 114 = F14             
--keycode 115 = Help            
--keycode 116 = Do              
--keycode 117 = F17             
--keycode 118 = KP_MinPlus      
--keycode 119 = Pause           
--keycode 120 =
--keycode 121 =
--keycode 122 =
--keycode 123 =
--keycode 124 =
--keycode 125 =
--keycode 126 =
--keycode 127 =
-+keycode 116  = Escape          
- string F1 = "\033[[A"
- string F2 = "\033[[B"
- string F3 = "\033[[C"
-Index: linux-2.6.26/drivers/char/Makefile
-===================================================================
---- linux-2.6.26.orig/drivers/char/Makefile	2008-07-13 23:51:29.000000000 +0200
-+++ linux-2.6.26/drivers/char/Makefile	2008-07-24 21:57:12.744280423 +0200
-@@ -127,7 +127,7 @@
- # Uncomment if you're changing the keymap and have an appropriate
- # loadkeys version for the map. By default, we'll use the shipped
- # versions.
--# GENERATE_KEYMAP := 1
-+ GENERATE_KEYMAP := 1
- 
- ifdef GENERATE_KEYMAP
- 
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/connectplus-prevent-oops-HACK.patch b/packages/kexecboot/linux-kexecboot-2.6.26/connectplus-prevent-oops-HACK.patch
deleted file mode 100644
index b5439c62e7..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/connectplus-prevent-oops-HACK.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Index: linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c
-===================================================================
---- linux-2.6.21.orig/drivers/net/wireless/hostap/hostap_hw.c	2007-07-07 12:45:39.000000000 +0100
-+++ linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c	2007-07-07 12:47:30.000000000 +0100
-@@ -2666,6 +2666,12 @@
- 	iface = netdev_priv(dev);
- 	local = iface->local;
- 
-+	if(dev->base_addr == 0)
-+	{
-+		printk(KERN_DEBUG "%s: IRQ before base_addr set\n", dev->name);
-+		return IRQ_HANDLED;
-+	}
-+
- 	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
- 
- 	if (local->func->card_present && !local->func->card_present(local)) {
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/connectplus-remove-ide-HACK.patch b/packages/kexecboot/linux-kexecboot-2.6.26/connectplus-remove-ide-HACK.patch
deleted file mode 100644
index 4414b21191..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/connectplus-remove-ide-HACK.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-Index: linux-2.6.13/drivers/ide/legacy/ide-cs.c
-===================================================================
---- linux-2.6.13.orig/drivers/ide/legacy/ide-cs.c	2005-09-01 22:43:46.000000000 +0100
-+++ linux-2.6.13/drivers/ide/legacy/ide-cs.c	2005-09-01 22:45:46.000000000 +0100
-@@ -488,7 +488,6 @@
- 	PCMCIA_DEVICE_PROD_ID123("KODAK Picture Card       ", "KODAK  ", "V100K", 0x94a0d8f3, 0xe4fc3ea0, 0xe5e7eed4),
- 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
- 	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
--	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
- 	PCMCIA_DEVICE_NULL,
- };
- MODULE_DEVICE_TABLE(pcmcia, ide_ids);
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/hostap-monitor-mode.patch b/packages/kexecboot/linux-kexecboot-2.6.26/hostap-monitor-mode.patch
deleted file mode 100644
index 641fd19e50..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/hostap-monitor-mode.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-This is a patch that I've been maintaining for a few years, and I'd 
-really like to see it added to the mainstream zaurus kernel so I can 
-finally stop distributing my own.
-
-This patch only effects the card while in monitor mode, and does not 
-cause any known stability issues.
-
-http://patches.aircrack-ng.org/hostap-kernel-2.6.18.patch
-
-Rick Farina (Zero_Chaos)
-
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c	2006-09-21 01:30:18.000000000 -0400
-@@ -69,6 +69,9 @@
- 	iface = netdev_priv(dev);
- 	local = iface->local;
- 
-+	if (local->iw_mode == IW_MODE_MONITOR)
-+		goto xmit;
-+
- 	if (skb->len < ETH_HLEN) {
- 		printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
- 		       "(len=%d)\n", dev->name, skb->len);
-@@ -234,6 +237,7 @@
- 		memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN);
- 	}
- 
-+xmit:
- 	iface->stats.tx_packets++;
- 	iface->stats.tx_bytes += skb->len;
- 
-@@ -404,8 +408,6 @@
- 	}
- 
- 	if (skb->len < 24) {
--		printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
--		       "(len=%d)\n", dev->name, skb->len);
- 		ret = 0;
- 		iface->stats.tx_dropped++;
- 		goto fail;
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.orig
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.rej
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c	2006-09-21 01:30:18.000000000 -0400
-@@ -1005,6 +1005,35 @@
- 	return fid;
- }
- 
-+static int prism2_monitor_enable(struct net_device *dev)
-+{
-+	if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) {
-+		printk(KERN_DEBUG "Port type setting for monitor mode "
-+			"failed\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8),
-+			     0, NULL, NULL)) {
-+		printk(KERN_DEBUG "Could not enter testmode 0x0a\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
-+			    HFA384X_WEPFLAGS_PRIVACYINVOKED |
-+			    HFA384X_WEPFLAGS_HOSTENCRYPT |
-+			    HFA384X_WEPFLAGS_HOSTDECRYPT)) {
-+		printk(KERN_DEBUG "WEP flags setting failed\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) {
-+		printk(KERN_DEBUG "Could not set promiscuous mode\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return 0;
-+}
- 
- static int prism2_reset_port(struct net_device *dev)
- {
-@@ -1031,6 +1060,10 @@
- 			       "port\n", dev->name);
- 	}
- 
-+	if (local->iw_mode == IW_MODE_MONITOR)
-+		/* force mode 0x0a after port 0 reset */
-+		return prism2_monitor_enable(dev);
-+
- 	/* It looks like at least some STA firmware versions reset
- 	 * fragmentation threshold back to 2346 after enable command. Restore
- 	 * the configured value, if it differs from this default. */
-@@ -1466,6 +1499,10 @@
- 		return 1;
- 	}
- 
-+	if (local->iw_mode == IW_MODE_MONITOR)
-+		/* force mode 0x0a after port 0 reset */
-+		prism2_monitor_enable(dev);
-+
- 	local->hw_ready = 1;
- 	local->hw_reset_tries = 0;
- 	local->hw_resetting = 0;
-@@ -3156,6 +3193,7 @@
- 	local->func->hw_config = prism2_hw_config;
- 	local->func->hw_reset = prism2_hw_reset;
- 	local->func->hw_shutdown = prism2_hw_shutdown;
-+	local->func->monitor_enable = prism2_monitor_enable;
- 	local->func->reset_port = prism2_reset_port;
- 	local->func->schedule_reset = prism2_schedule_reset;
- #ifdef PRISM2_DOWNLOAD_SUPPORT
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_hw.c.orig
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c	2006-09-21 01:30:18.000000000 -0400
-@@ -1104,33 +1104,7 @@
- 
- 	printk(KERN_DEBUG "Enabling monitor mode\n");
- 	hostap_monitor_set_type(local);
--
--	if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
--			    HFA384X_PORTTYPE_PSEUDO_IBSS)) {
--		printk(KERN_DEBUG "Port type setting for monitor mode "
--		       "failed\n");
--		return -EOPNOTSUPP;
--	}
--
--	/* Host decrypt is needed to get the IV and ICV fields;
--	 * however, monitor mode seems to remove WEP flag from frame
--	 * control field */
--	if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
--			    HFA384X_WEPFLAGS_HOSTENCRYPT |
--			    HFA384X_WEPFLAGS_HOSTDECRYPT)) {
--		printk(KERN_DEBUG "WEP flags setting failed\n");
--		return -EOPNOTSUPP;
--	}
--
--	if (local->func->reset_port(dev) ||
--	    local->func->cmd(dev, HFA384X_CMDCODE_TEST |
--			     (HFA384X_TEST_MONITOR << 8),
--			     0, NULL, NULL)) {
--		printk(KERN_DEBUG "Setting monitor mode failed\n");
--		return -EOPNOTSUPP;
--	}
--
--	return 0;
-+	return local->func->reset_port(dev);
- }
- 
- 
-@@ -1199,7 +1173,7 @@
- 	local->iw_mode = *mode;
- 
- 	if (local->iw_mode == IW_MODE_MONITOR)
--		hostap_monitor_mode_enable(local);
-+		return hostap_monitor_mode_enable(local);
- 	else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt &&
- 		 !local->fw_encrypt_ok) {
- 		printk(KERN_DEBUG "%s: defaulting to host-based encryption as "
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c	2006-09-21 01:30:18.000000000 -0400
-@@ -331,7 +331,7 @@
- 	if (local->iw_mode == IW_MODE_REPEAT)
- 		return HFA384X_PORTTYPE_WDS;
- 	if (local->iw_mode == IW_MODE_MONITOR)
--		return HFA384X_PORTTYPE_PSEUDO_IBSS;
-+		return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/
- 	return HFA384X_PORTTYPE_HOSTAP;
- }
- 
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_main.c.orig
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c	2006-09-21 01:30:18.000000000 -0400
-@@ -48,6 +48,8 @@
- 	{ 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID },
- 	/* Samsung MagicLAN SWL-2210P */
- 	{ 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID },
-+	/* NETGEAR MA311 */
-+	{ 0x1385, 0x3872, PCI_ANY_ID, PCI_ANY_ID },
- 	{ 0 }
- };
- 
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_pci.c.orig
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c	2006-09-21 01:30:18.000000000 -0400
-@@ -101,6 +101,7 @@
- 	{ 0xc250, 0x0002 } /* EMTAC A2424i */,
- 	{ 0xd601, 0x0002 } /* Z-Com XI300 */,
- 	{ 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
-+	{ 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */,
- 	{ 0, 0}
- };
- 
-Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_plx.c.orig
-diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h
---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h	2006-09-21 01:26:27.000000000 -0400
-+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h	2006-09-21 01:30:18.000000000 -0400
-@@ -575,6 +575,7 @@
- 	int (*hw_config)(struct net_device *dev, int initial);
- 	void (*hw_reset)(struct net_device *dev);
- 	void (*hw_shutdown)(struct net_device *dev, int no_disable);
-+	int (*monitor_enable)(struct net_device *dev);
- 	int (*reset_port)(struct net_device *dev);
- 	void (*schedule_reset)(local_info_t *local);
- 	int (*download)(local_info_t *local,
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/hrw-hostapcard.patch b/packages/kexecboot/linux-kexecboot-2.6.26/hrw-hostapcard.patch
deleted file mode 100644
index 67fc5b7c70..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/hrw-hostapcard.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-
-From: Marcin Juszkiewicz <openembedded@haerwu.biz>
-
-Card reported by Ångström user:
-http://bugs.openembedded.net/show_bug.cgi?id=3236
-
-Socket 1:
-   product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", ""
-   manfid: 0x0156, 0x0002
-   function: 6 (network)
-
-Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz>
-Acked-by: Pavel Roskin <proski@gnu.org>
-
----
- drivers/net/wireless/hostap/hostap_cs.c |    3 +++
- 1 file changed, 3 insertions(+)
-
---- linux-2.6.24.orig/drivers/net/wireless/hostap/hostap_cs.c
-+++ linux-2.6.24/drivers/net/wireless/hostap/hostap_cs.c
-@@ -892,10 +892,13 @@ static struct pcmcia_device_id hostap_cs
- 		0xa21501a, 0x59868926, 0xc9049a39),
- 	PCMCIA_DEVICE_PROD_ID1234(
- 		"The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P",
- 		"RevA",
- 		0xa5f472c2, 0x9c05598d, 0xc9049a39, 0x57a66194),
-+	PCMCIA_DEVICE_PROD_ID123(
-+		"Wireless LAN" , "11Mbps PC Card", "Version 01.02",
-+		0x4b8870ff, 0x70e946d1, 0x4b74baa0),
- 	PCMCIA_DEVICE_NULL
- };
- MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
- 
- 
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/htcuni-acx.patch b/packages/kexecboot/linux-kexecboot-2.6.26/htcuni-acx.patch
deleted file mode 100644
index 1ccebddc8d..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/htcuni-acx.patch
+++ /dev/null
@@ -1,33527 +0,0 @@
----
- drivers/net/wireless/Kconfig                |   31 
- drivers/net/wireless/Makefile               |    2 
- drivers/net/wireless/acx/Kconfig            |  113 
- drivers/net/wireless/acx/Makefile           |   21 
- drivers/net/wireless/acx/acx.h              |   14 
- drivers/net/wireless/acx/acx_config.h       |   50 
- drivers/net/wireless/acx/acx_func.h         |  710 ++
- drivers/net/wireless/acx/acx_hw.h           |   18 
- drivers/net/wireless/acx/acx_struct.h       | 2114 ++++++++
- drivers/net/wireless/acx/common.c           | 7388 ++++++++++++++++++++++++++++
- drivers/net/wireless/acx/conv.c             |  504 +
- drivers/net/wireless/acx/cs.c               | 5703 +++++++++++++++++++++
- drivers/net/wireless/acx/htcsable_acx.c     |  118 
- drivers/net/wireless/acx/htcuniversal_acx.c |  108 
- drivers/net/wireless/acx/hx4700_acx.c       |  108 
- drivers/net/wireless/acx/ioctl.c            | 2748 ++++++++++
- drivers/net/wireless/acx/mem.c              | 5363 ++++++++++++++++++++
- drivers/net/wireless/acx/pci.c              | 4234 ++++++++++++++++
- drivers/net/wireless/acx/rx3000_acx.c       |  110 
- drivers/net/wireless/acx/setrate.c          |  213 
- drivers/net/wireless/acx/usb.c              | 1922 +++++++
- drivers/net/wireless/acx/wlan.c             |  424 +
- drivers/net/wireless/acx/wlan_compat.h      |  260 
- drivers/net/wireless/acx/wlan_hdr.h         |  497 +
- drivers/net/wireless/acx/wlan_mgmt.h        |  582 ++
- 25 files changed, 33355 insertions(+)
-
-Index: linux-2.6.23/drivers/net/wireless/acx/acx_config.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx_config.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,50 @@
-+#define ACX_RELEASE "v0.3.36"
-+
-+/*
-+ * Test out all the channels in reg domain 0x10
-+ */
-+#define ACX_ALLOW_ALLCHANNELS
-+
-+/* set to 0 if you don't want any debugging code to be compiled in */
-+/* set to 1 if you want some debugging */
-+/* set to 2 if you want extensive debug log */
-+#define ACX_DEBUG 0
-+
-+/*
-+ * Since we'll be changing channels a lot
-+#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT)
-+*/
-+#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT)
-+
-+/* assume 32bit I/O width
-+ * (16bit is also compatible with Compact Flash) */
-+#define ACX_IO_WIDTH 32
-+
-+/* Set this to 1 if you want monitor mode to use
-+ * phy header. Currently it is not useful anyway since we
-+ * don't know what useful info (if any) is in phy header.
-+ * If you want faster/smaller code, say 0 here */
-+#define WANT_PHY_HDR 0
-+
-+/* whether to do Tx descriptor cleanup in softirq (i.e. not in IRQ
-+ * handler) or not. Note that doing it later does slightly increase
-+ * system load, so still do that stuff in the IRQ handler for now,
-+ * even if that probably means worse latency */
-+#define TX_CLEANUP_IN_SOFTIRQ 0
-+
-+/* if you want very experimental 802.11 power save mode features */
-+#define POWER_SAVE_80211 0
-+
-+/* if you want very early packet fragmentation bits and pieces */
-+#define ACX_FRAGMENTATION 0
-+
-+/* Locking: */
-+/* very talkative */
-+/* #define PARANOID_LOCKING 1 */
-+/* normal (use when bug-free) */
-+#define DO_LOCKING 1
-+/* else locking is disabled! */
-+
-+/* 0 - normal mode */
-+/* 1 - development/debug: probe for IEs on modprobe */
-+#define CMD_DISCOVERY 0
-Index: linux-2.6.23/drivers/net/wireless/acx/acx_func.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx_func.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,710 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+
-+/***********************************************************************
-+** LOGGING
-+**
-+** - Avoid SHOUTING needlessly. Avoid excessive verbosity.
-+**   Gradually remove messages which are old debugging aids.
-+**
-+** - Use printk() for messages which are to be always logged.
-+**   Supply either 'acx:' or '<devname>:' prefix so that user
-+**   can figure out who's speaking among other kernel chatter.
-+**   acx: is for general issues (e.g. "acx: no firmware image!")
-+**   while <devname>: is related to a particular device
-+**   (think about multi-card setup). Double check that message
-+**   is not confusing to the average user.
-+**
-+** - use printk KERN_xxx level only if message is not a WARNING
-+**   but is INFO, ERR etc.
-+**
-+** - Use printk_ratelimited() for messages which may flood
-+**   (e.g. "rx DUP pkt!").
-+**
-+** - Use log() for messages which may be omitted (and they
-+**   _will_ be omitted in non-debug builds). Note that
-+**   message levels may be disabled at compile-time selectively,
-+**   thus select them wisely. Example: L_DEBUG is the lowest
-+**   (most likely to be compiled out) -> use for less important stuff.
-+**
-+** - Do not print important stuff with log(), or else people
-+**   will never build non-debug driver.
-+**
-+** Style:
-+** hex: capital letters, zero filled (e.g. 0x02AC)
-+** str: dont start from capitals, no trailing periods ("tx: queue is stopped")
-+*/
-+#if ACX_DEBUG > 1
-+
-+void log_fn_enter(const char *funcname);
-+void log_fn_exit(const char *funcname);
-+void log_fn_exit_v(const char *funcname, int v);
-+
-+#define FN_ENTER \
-+	do { \
-+		if (unlikely(acx_debug & L_FUNC)) { \
-+			log_fn_enter(__func__); \
-+		} \
-+	} while (0)
-+
-+#define FN_EXIT1(v) \
-+	do { \
-+		if (unlikely(acx_debug & L_FUNC)) { \
-+			log_fn_exit_v(__func__, v); \
-+		} \
-+	} while (0)
-+#define FN_EXIT0 \
-+	do { \
-+		if (unlikely(acx_debug & L_FUNC)) { \
-+			log_fn_exit(__func__); \
-+		} \
-+	} while (0)
-+
-+#else
-+
-+#define FN_ENTER
-+#define FN_EXIT1(v)
-+#define FN_EXIT0
-+
-+#endif /* ACX_DEBUG > 1 */
-+
-+
-+#if ACX_DEBUG
-+
-+#define log(chan, args...) \
-+	do { \
-+		if (acx_debug & (chan)) \
-+			printk(KERN_DEBUG args); \
-+	} while (0)
-+#define printk_ratelimited(args...) printk(args)
-+
-+#else /* Non-debug build: */
-+
-+#define log(chan, args...)
-+/* Standard way of log flood prevention */
-+#define printk_ratelimited(args...) \
-+do { \
-+	if (printk_ratelimit()) \
-+		printk(args); \
-+} while (0)
-+
-+#endif /* ACX_DEBUG */
-+
-+void acx_print_mac(const char *head, const u8 *mac, const char *tail);
-+
-+/* Optimized out to nothing in non-debug build */
-+static inline void
-+acxlog_mac(int level, const char *head, const u8 *mac, const char *tail)
-+{
-+	if (acx_debug & level) {
-+		acx_print_mac(head, mac, tail);
-+	}
-+}
-+
-+
-+/***********************************************************************
-+** MAC address helpers
-+*/
-+static inline void
-+MAC_COPY(u8 *mac, const u8 *src)
-+{
-+	*(u32*)mac = *(u32*)src;
-+	((u16*)mac)[2] = ((u16*)src)[2];
-+	/* kernel's memcpy will do the same: memcpy(dst, src, ETH_ALEN); */
-+}
-+
-+static inline void
-+MAC_FILL(u8 *mac, u8 val)
-+{
-+	memset(mac, val, ETH_ALEN);
-+}
-+
-+static inline void
-+MAC_BCAST(u8 *mac)
-+{
-+	((u16*)mac)[2] = *(u32*)mac = -1;
-+}
-+
-+static inline void
-+MAC_ZERO(u8 *mac)
-+{
-+	((u16*)mac)[2] = *(u32*)mac = 0;
-+}
-+
-+static inline int
-+mac_is_equal(const u8 *a, const u8 *b)
-+{
-+	/* can't beat this */
-+	return memcmp(a, b, ETH_ALEN) == 0;
-+}
-+
-+static inline int
-+mac_is_bcast(const u8 *mac)
-+{
-+	/* AND together 4 first bytes with sign-extended 2 last bytes
-+	** Only bcast address gives 0xffffffff. +1 gives 0 */
-+	return ( *(s32*)mac & ((s16*)mac)[2] ) + 1 == 0;
-+}
-+
-+static inline int
-+mac_is_zero(const u8 *mac)
-+{
-+	return ( *(u32*)mac | ((u16*)mac)[2] ) == 0;
-+}
-+
-+static inline int
-+mac_is_directed(const u8 *mac)
-+{
-+	return (mac[0] & 1)==0;
-+}
-+
-+static inline int
-+mac_is_mcast(const u8 *mac)
-+{
-+	return (mac[0] & 1) && !mac_is_bcast(mac);
-+}
-+
-+#define MACSTR "%02X:%02X:%02X:%02X:%02X:%02X"
-+#define MAC(bytevector) \
-+	((unsigned char *)bytevector)[0], \
-+	((unsigned char *)bytevector)[1], \
-+	((unsigned char *)bytevector)[2], \
-+	((unsigned char *)bytevector)[3], \
-+	((unsigned char *)bytevector)[4], \
-+	((unsigned char *)bytevector)[5]
-+
-+
-+/***********************************************************************
-+** Random helpers
-+*/
-+#define TO_STRING(x)	#x
-+#define STRING(x)	TO_STRING(x)
-+
-+#define CLEAR_BIT(val, mask) ((val) &= ~(mask))
-+#define SET_BIT(val, mask) ((val) |= (mask))
-+
-+/* undefined if v==0 */
-+static inline unsigned int
-+lowest_bit(u16 v)
-+{
-+	unsigned int n = 0;
-+	while (!(v & 0xf)) { v>>=4; n+=4; }
-+	while (!(v & 1)) { v>>=1; n++; }
-+	return n;
-+}
-+
-+/* undefined if v==0 */
-+static inline unsigned int
-+highest_bit(u16 v)
-+{
-+	unsigned int n = 0;
-+	while (v>0xf) { v>>=4; n+=4; }
-+	while (v>1) { v>>=1; n++; }
-+	return n;
-+}
-+
-+/* undefined if v==0 */
-+static inline int
-+has_only_one_bit(u16 v)
-+{
-+	return ((v-1) ^ v) >= v;
-+}
-+
-+
-+static inline int
-+is_hidden_essid(char *essid)
-+{
-+	return (('\0' == essid[0]) ||
-+		((' ' == essid[0]) && ('\0' == essid[1])));
-+}
-+
-+/***********************************************************************
-+** LOCKING
-+** We have adev->sem and adev->lock.
-+**
-+** We employ following naming convention in order to get locking right:
-+**
-+** acx_e_xxxx - external entry points called from process context.
-+**	It is okay to sleep. adev->sem is to be taken on entry.
-+** acx_i_xxxx - external entry points possibly called from atomic context.
-+**	Sleeping is not allowed (and thus down(sem) is not legal!)
-+** acx_s_xxxx - potentially sleeping functions. Do not ever call under lock!
-+** acx_l_xxxx - functions which expect lock to be already taken.
-+** rest       - non-sleeping functions which do not require locking
-+**		but may be run under lock
-+**
-+** A small number of local helpers do not have acx_[eisl]_ prefix.
-+** They are always close to caller and are to be reviewed locally.
-+**
-+** Theory of operation:
-+**
-+** All process-context entry points (_e_ functions) take sem
-+** immediately. IRQ handler and other 'atomic-context' entry points
-+** (_i_ functions) take lock immediately on entry, but dont take sem
-+** because that might sleep.
-+**
-+** Thus *all* code is either protected by sem or lock, or both.
-+**
-+** Code which must not run concurrently with IRQ takes lock.
-+** Such code is marked with _l_.
-+**
-+** This results in the following rules of thumb useful in code review:
-+**
-+** + If a function calls _s_ fn, it must be an _s_ itself.
-+** + You can call _l_ fn only (a) from another _l_ fn
-+**   or (b) from _s_, _e_ or _i_ fn by taking lock, calling _l_,
-+**   and dropping lock.
-+** + All IRQ code runs under lock.
-+** + Any _s_ fn is running under sem.
-+** + Code under sem can race only with IRQ code.
-+** + Code under sem+lock cannot race with anything.
-+*/
-+
-+/* These functions *must* be inline or they will break horribly on SPARC, due
-+ * to its weird semantics for save/restore flags */
-+
-+#if defined(PARANOID_LOCKING) /* Lock debugging */
-+
-+void acx_lock_debug(acx_device_t *adev, const char* where);
-+void acx_unlock_debug(acx_device_t *adev, const char* where);
-+void acx_down_debug(acx_device_t *adev, const char* where);
-+void acx_up_debug(acx_device_t *adev, const char* where);
-+void acx_lock_unhold(void);
-+void acx_sem_unhold(void);
-+
-+static inline void
-+acx_lock_helper(acx_device_t *adev, unsigned long *fp, const char* where)
-+{
-+	acx_lock_debug(adev, where);
-+	spin_lock_irqsave(&adev->lock, *fp);
-+}
-+static inline void
-+acx_unlock_helper(acx_device_t *adev, unsigned long *fp, const char* where)
-+{
-+	acx_unlock_debug(adev, where);
-+	spin_unlock_irqrestore(&adev->lock, *fp);
-+}
-+static inline void
-+acx_down_helper(acx_device_t *adev, const char* where)
-+{
-+	acx_down_debug(adev, where);
-+}
-+static inline void
-+acx_up_helper(acx_device_t *adev, const char* where)
-+{
-+	acx_up_debug(adev, where);
-+}
-+#define acx_lock(adev, flags)	acx_lock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__))
-+#define acx_unlock(adev, flags)	acx_unlock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__))
-+#define acx_sem_lock(adev)	acx_down_helper(adev, __FILE__ ":" STRING(__LINE__))
-+#define acx_sem_unlock(adev)	acx_up_helper(adev, __FILE__ ":" STRING(__LINE__))
-+
-+#elif defined(DO_LOCKING)
-+
-+#define acx_lock(adev, flags)	spin_lock_irqsave(&adev->lock, flags)
-+#define acx_unlock(adev, flags)	spin_unlock_irqrestore(&adev->lock, flags)
-+#define acx_sem_lock(adev)	down(&adev->sem)
-+#define acx_sem_unlock(adev)	up(&adev->sem)
-+#define acx_lock_unhold()	((void)0)
-+#define acx_sem_unhold()	((void)0)
-+
-+#else /* no locking! :( */
-+
-+#define acx_lock(adev, flags)	((void)0)
-+#define acx_unlock(adev, flags)	((void)0)
-+#define acx_sem_lock(adev)	((void)0)
-+#define acx_sem_unlock(adev)	((void)0)
-+#define acx_lock_unhold()	((void)0)
-+#define acx_sem_unhold()	((void)0)
-+
-+#endif
-+
-+
-+/***********************************************************************
-+*/
-+
-+/* Can race with rx path (which is not protected by sem):
-+** rx -> process_[re]assocresp() -> set_status(ASSOCIATED) -> wake_queue()
-+** Can race with tx_complete IRQ:
-+** IRQ -> acxpci_l_clean_txdesc -> acx_wake_queue
-+** Review carefully all callsites */
-+static inline void
-+acx_stop_queue(struct net_device *ndev, const char *msg)
-+{
-+	if (netif_queue_stopped(ndev))
-+		return;
-+
-+	netif_stop_queue(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: stop queue %s\n", msg);
-+}
-+
-+static inline int
-+acx_queue_stopped(struct net_device *ndev)
-+{
-+	return netif_queue_stopped(ndev);
-+}
-+
-+/*
-+static inline void
-+acx_start_queue(struct net_device *ndev, const char *msg)
-+{
-+	netif_start_queue(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: start queue %s\n", msg);
-+}
-+*/
-+
-+static inline void
-+acx_wake_queue(struct net_device *ndev, const char *msg)
-+{
-+	netif_wake_queue(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: wake queue %s\n", msg);
-+}
-+
-+static inline void
-+acx_carrier_off(struct net_device *ndev, const char *msg)
-+{
-+	netif_carrier_off(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: carrier off %s\n", msg);
-+}
-+
-+static inline void
-+acx_carrier_on(struct net_device *ndev, const char *msg)
-+{
-+	netif_carrier_on(ndev);
-+	if (msg)
-+		log(L_BUFT, "tx: carrier on %s\n", msg);
-+}
-+
-+/* This function does not need locking UNLESS you call it
-+** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can
-+** wake queue. This can race with stop_queue elsewhere. */
-+void acx_set_status(acx_device_t *adev, u16 status);
-+
-+
-+/***********************************************************************
-+** Communication with firmware
-+*/
-+#define CMD_TIMEOUT_MS(n)	(n)
-+#define ACX_CMD_TIMEOUT_DEFAULT	CMD_TIMEOUT_MS(50)
-+
-+#if ACX_DEBUG
-+
-+/* We want to log cmd names */
-+int acxpci_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr);
-+int acxmem_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr);
-+int acxusb_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr);
-+static inline int
-+acx_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr)
-+{
-+        if (IS_MEM(adev))
-+                return acxmem_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr);
-+	if (IS_PCI(adev))
-+		return acxpci_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr);
-+	return acxusb_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr);
-+}
-+#define acx_s_issue_cmd(adev,cmd,param,len) \
-+	acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,ACX_CMD_TIMEOUT_DEFAULT,#cmd)
-+#define acx_s_issue_cmd_timeo(adev,cmd,param,len,timeo) \
-+	acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,timeo,#cmd)
-+int acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* str);
-+#define acx_s_configure(adev,pdr,type) \
-+	acx_s_configure_debug(adev,pdr,type,#type)
-+int acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type, const char* str);
-+#define acx_s_interrogate(adev,pdr,type) \
-+	acx_s_interrogate_debug(adev,pdr,type,#type)
-+
-+#else
-+
-+int acxpci_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout);
-+int acxmem_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout);
-+int acxusb_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout);
-+static inline int
-+acx_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd,	void *param, unsigned len, unsigned timeout)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, timeout);
-+	if (IS_PCI(adev))
-+		return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, timeout);
-+	return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, timeout);
-+}
-+static inline int
-+acx_s_issue_cmd(acx_device_t *adev, unsigned cmd, void *param, unsigned len)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT);
-+	if (IS_PCI(adev))
-+		return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT);
-+	return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT);
-+}
-+int acx_s_configure(acx_device_t *adev, void *pdr, int type);
-+int acx_s_interrogate(acx_device_t *adev, void *pdr, int type);
-+
-+#endif
-+
-+void acx_s_cmd_start_scan(acx_device_t *adev);
-+
-+
-+/***********************************************************************
-+** Ioctls
-+*/
-+int
-+acx111pci_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra);
-+int
-+acx100pci_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra);
-+int
-+acx100mem_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra);
-+
-+
-+/***********************************************************************
-+** /proc
-+*/
-+#ifdef CONFIG_PROC_FS
-+int acx_proc_register_entries(const struct net_device *ndev);
-+int acx_proc_unregister_entries(const struct net_device *ndev);
-+#else
-+static inline int
-+acx_proc_register_entries(const struct net_device *ndev) { return OK; }
-+static inline int
-+acx_proc_unregister_entries(const struct net_device *ndev) { return OK; }
-+#endif
-+
-+
-+/***********************************************************************
-+*/
-+firmware_image_t *acx_s_read_fw(struct device *dev, const char *file, u32 *size);
-+int acxpci_s_upload_radio(acx_device_t *adev);
-+int acxmem_s_upload_radio(acx_device_t *adev);
-+
-+
-+/***********************************************************************
-+** Unsorted yet :)
-+*/
-+int acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf);
-+int acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf);
-+int acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf);
-+static inline int
-+acx_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_s_read_phy_reg(adev, reg, charbuf);
-+	if (IS_PCI(adev))
-+		return acxpci_s_read_phy_reg(adev, reg, charbuf);
-+	return acxusb_s_read_phy_reg(adev, reg, charbuf);
-+}
-+
-+int acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value);
-+int acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value);
-+int acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value);
-+static inline int
-+acx_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_s_write_phy_reg(adev, reg, value);
-+	if (IS_PCI(adev))
-+		return acxpci_s_write_phy_reg(adev, reg, value);
-+	return acxusb_s_write_phy_reg(adev, reg, value);
-+}
-+
-+tx_t* acxpci_l_alloc_tx(acx_device_t *adev);
-+tx_t* acxmem_l_alloc_tx(acx_device_t *adev);
-+tx_t* acxusb_l_alloc_tx(acx_device_t *adev);
-+static inline tx_t*
-+acx_l_alloc_tx(acx_device_t *adev)
-+{
-+	if (IS_MEM(adev))
-+		return acxmem_l_alloc_tx(adev);
-+	if (IS_PCI(adev))
-+		return acxpci_l_alloc_tx(adev);
-+	return acxusb_l_alloc_tx(adev);
-+}
-+
-+void acxusb_l_dealloc_tx(tx_t *tx_opaque);
-+void acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque);
-+static inline void
-+acx_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque)
-+{
-+#ifdef ACX_MEM
-+  acxmem_l_dealloc_tx (adev, tx_opaque);
-+#else
-+	if (IS_USB(adev))
-+		acxusb_l_dealloc_tx(tx_opaque);
-+#endif
-+}
-+
-+void* acxpci_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque);
-+void* acxmem_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque);
-+void* acxusb_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque);
-+static inline void*
-+acx_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque)
-+{
-+#if defined (ACX_MEM)
-+		return acxmem_l_get_txbuf(adev, tx_opaque);
-+#else
-+	if (IS_PCI(adev))
-+		return acxpci_l_get_txbuf(adev, tx_opaque);
-+	return acxusb_l_get_txbuf(adev, tx_opaque);
-+#endif
-+}
-+
-+void acxpci_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len);
-+void acxmem_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len);
-+void acxusb_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len);
-+static inline void
-+acx_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len)
-+{
-+#if defined (ACX_MEM)
-+		acxmem_l_tx_data(adev, tx_opaque, len);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_l_tx_data(adev, tx_opaque, len);
-+	else
-+		acxusb_l_tx_data(adev, tx_opaque, len);
-+#endif
-+}
-+
-+static inline wlan_hdr_t*
-+acx_get_wlan_hdr(acx_device_t *adev, const rxbuffer_t *rxbuf)
-+{
-+	return (wlan_hdr_t*)((u8*)&rxbuf->hdr_a3 + adev->phy_header_len);
-+}
-+
-+void acxpci_l_power_led(acx_device_t *adev, int enable);
-+int acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf);
-+unsigned int acxpci_l_clean_txdesc(acx_device_t *adev);
-+void acxpci_l_clean_txdesc_emergency(acx_device_t *adev);
-+int acxpci_s_create_hostdesc_queues(acx_device_t *adev);
-+void acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start);
-+void acxpci_free_desc_queues(acx_device_t *adev);
-+char* acxpci_s_proc_diag_output(char *p, acx_device_t *adev);
-+int acxpci_proc_eeprom_output(char *p, acx_device_t *adev);
-+void acxpci_set_interrupt_mask(acx_device_t *adev);
-+int acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm);
-+
-+void acxmem_l_power_led(acx_device_t *adev, int enable);
-+int acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf);
-+unsigned int acxmem_l_clean_txdesc(acx_device_t *adev);
-+void acxmem_l_clean_txdesc_emergency(acx_device_t *adev);
-+int acxmem_s_create_hostdesc_queues(acx_device_t *adev);
-+void acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start);
-+void acxmem_free_desc_queues(acx_device_t *adev);
-+char* acxmem_s_proc_diag_output(char *p, acx_device_t *adev);
-+int acxmem_proc_eeprom_output(char *p, acx_device_t *adev);
-+void acxmem_set_interrupt_mask(acx_device_t *adev);
-+int acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm);
-+
-+void acx_s_msleep(int ms);
-+int acx_s_init_mac(acx_device_t *adev);
-+void acx_set_reg_domain(acx_device_t *adev, unsigned char reg_dom_id);
-+void acx_set_timer(acx_device_t *adev, int timeout_us);
-+void acx_update_capabilities(acx_device_t *adev);
-+void acx_s_start(acx_device_t *adev);
-+
-+void acx_s_update_card_settings(acx_device_t *adev);
-+void acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg);
-+void acx_l_update_ratevector(acx_device_t *adev);
-+
-+void acx_init_task_scheduler(acx_device_t *adev);
-+void acx_schedule_task(acx_device_t *adev, unsigned int set_flag);
-+
-+int acx_e_ioctl_old(struct net_device *ndev, struct ifreq *ifr, int cmd);
-+
-+client_t *acx_l_sta_list_get(acx_device_t *adev, const u8 *address);
-+void acx_l_sta_list_del(acx_device_t *adev, client_t *clt);
-+
-+int acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt);
-+void acx_i_timer(unsigned long a);
-+int acx_s_complete_scan(acx_device_t *adev);
-+
-+struct sk_buff *acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf);
-+int acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb);
-+
-+u8 acx_signal_determine_quality(u8 signal, u8 noise);
-+
-+void acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf);
-+void acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc,
-+			u16 intended_rate, u8 rate100, u16 rate111, u8 error,
-+			int pkts_to_ignore);
-+
-+void acx_dump_bytes(const void *, int);
-+void acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr);
-+
-+u8 acx_rate111to100(u16);
-+
-+void acx_s_set_defaults(acx_device_t *adev);
-+
-+#if !ACX_DEBUG
-+static inline const char* acx_get_packet_type_string(u16 fc) { return ""; }
-+#else
-+const char* acx_get_packet_type_string(u16 fc);
-+#endif
-+const char* acx_cmd_status_str(unsigned int state);
-+
-+int acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev);
-+
-+void great_inquisitor(acx_device_t *adev);
-+
-+void acx_s_get_firmware_version(acx_device_t *adev);
-+void acx_display_hardware_details(acx_device_t *adev);
-+
-+int acx_e_change_mtu(struct net_device *ndev, int mtu);
-+struct net_device_stats* acx_e_get_stats(struct net_device *ndev);
-+struct iw_statistics* acx_e_get_wireless_stats(struct net_device *ndev);
-+
-+#ifdef ACX_MEM
-+int __init acxmem_e_init_module(void);
-+void __exit acxmem_e_cleanup_module(void);
-+void acxmem_e_release(struct device *dev);
-+#else
-+int __init acxpci_e_init_module(void);
-+int __init acxusb_e_init_module(void);
-+void __exit acxpci_e_cleanup_module(void);
-+void __exit acxusb_e_cleanup_module(void);
-+#endif
-+int __init acx_cs_init(void);
-+void __exit acx_cs_cleanup(void);
-Index: linux-2.6.23/drivers/net/wireless/acx/acx.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,14 @@
-+#if defined(CONFIG_ACX_MEM) && !defined(ACX_MEM)
-+#define ACX_MEM
-+#endif
-+
-+#if defined(CONFIG_ACX_CS) && !defined(ACX_MEM)
-+#define ACX_MEM
-+#endif
-+
-+#include "acx_config.h"
-+#include "wlan_compat.h"
-+#include "wlan_hdr.h"
-+#include "wlan_mgmt.h"
-+#include "acx_struct.h"
-+#include "acx_func.h"
-Index: linux-2.6.23/drivers/net/wireless/acx/acx_hw.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx_hw.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,18 @@
-+/*
-+ * Interface for ACX slave memory driver
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ *
-+ * GPL
-+ *
-+ */
-+
-+#ifndef _ACX_HW_H
-+#define _ACX_HW_H
-+
-+struct acx_hardware_data {
-+	int (*start_hw)( void );
-+	int (*stop_hw)( void );
-+};
-+
-+#endif /* _ACX_HW_H */
-Index: linux-2.6.23/drivers/net/wireless/acx/acx_struct.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/acx_struct.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,2114 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** Forward declarations of types
-+*/
-+typedef struct tx tx_t;
-+typedef struct acx_device acx_device_t;
-+typedef struct client client_t;
-+typedef struct rxdesc rxdesc_t;
-+typedef struct txdesc txdesc_t;
-+typedef struct rxhostdesc rxhostdesc_t;
-+typedef struct txhostdesc txhostdesc_t;
-+
-+
-+/***********************************************************************
-+** Debug / log functionality
-+*/
-+enum {
-+	L_LOCK		= (ACX_DEBUG>1)*0x0001,	/* locking debug log */
-+	L_INIT		= (ACX_DEBUG>0)*0x0002,	/* special card initialization logging */
-+	L_IRQ		= (ACX_DEBUG>0)*0x0004,	/* interrupt stuff */
-+	L_ASSOC		= (ACX_DEBUG>0)*0x0008,	/* assocation (network join) and station log */
-+	L_FUNC		= (ACX_DEBUG>1)*0x0020,	/* logging of function enter / leave */
-+	L_XFER		= (ACX_DEBUG>1)*0x0080,	/* logging of transfers and mgmt */
-+	L_DATA		= (ACX_DEBUG>1)*0x0100,	/* logging of transfer data */
-+	L_DEBUG		= (ACX_DEBUG>1)*0x0200,	/* log of debug info */
-+	L_IOCTL		= (ACX_DEBUG>0)*0x0400,	/* log ioctl calls */
-+	L_CTL		= (ACX_DEBUG>1)*0x0800,	/* log of low-level ctl commands */
-+	L_BUFR		= (ACX_DEBUG>1)*0x1000,	/* debug rx buffer mgmt (ring buffer etc.) */
-+	L_XFER_BEACON	= (ACX_DEBUG>1)*0x2000,	/* also log beacon packets */
-+	L_BUFT		= (ACX_DEBUG>1)*0x4000,	/* debug tx buffer mgmt (ring buffer etc.) */
-+	L_USBRXTX	= (ACX_DEBUG>0)*0x8000,	/* debug USB rx/tx operations */
-+	L_BUF		= L_BUFR + L_BUFT,
-+	L_ANY		= 0xffff
-+};
-+
-+#if ACX_DEBUG
-+extern unsigned int acx_debug;
-+#else
-+enum { acx_debug = 0 };
-+#endif
-+
-+
-+/***********************************************************************
-+** Random helpers
-+*/
-+#define ACX_PACKED __attribute__ ((packed))
-+
-+#define VEC_SIZE(a) (sizeof(a)/sizeof(a[0]))
-+
-+/* Use worker_queues for 2.5/2.6 kernels and queue tasks for 2.4 kernels
-+   (used for the 'bottom half' of the interrupt routine) */
-+
-+#include <linux/workqueue.h>
-+#define USE_WORKER_TASKS
-+#define WORK_STRUCT struct work_struct
-+#define SCHEDULE_WORK schedule_work
-+#define FLUSH_SCHEDULED_WORK flush_scheduled_work
-+
-+
-+/***********************************************************************
-+** Constants
-+*/
-+#define OK	0
-+#define NOT_OK	1
-+
-+/* The supported chip models */
-+#define CHIPTYPE_ACX100		1
-+#define CHIPTYPE_ACX111		2
-+
-+#define IS_ACX100(adev)	((adev)->chip_type == CHIPTYPE_ACX100)
-+#define IS_ACX111(adev)	((adev)->chip_type == CHIPTYPE_ACX111)
-+
-+/* Supported interfaces */
-+#define DEVTYPE_PCI		0
-+#define DEVTYPE_USB		1
-+#define DEVTYPE_MEM             2
-+
-+#if !defined(CONFIG_ACX_PCI) && !defined(CONFIG_ACX_USB) && !defined(CONFIG_ACX_MEM) && !defined(CONFIG_ACX_CS)
-+#error Driver must include PCI, USB, PCMCIA or memory mapped interface support. You selected none of them.
-+#endif
-+
-+#if defined(CONFIG_ACX_PCI)
-+ #if !defined(CONFIG_ACX_USB)
-+  #define IS_PCI(adev)	1
-+ #else
-+  #define IS_PCI(adev)	((adev)->dev_type == DEVTYPE_PCI)
-+ #endif
-+#else
-+ #define IS_PCI(adev)	0
-+#endif
-+
-+#if defined(CONFIG_ACX_USB)
-+ #if !defined(CONFIG_ACX_PCI)
-+  #define IS_USB(adev)	1
-+ #else
-+  #define IS_USB(adev)	((adev)->dev_type == DEVTYPE_USB)
-+ #endif
-+#else
-+ #define IS_USB(adev)	0
-+#endif
-+
-+#if defined(CONFIG_ACX_MEM) || defined(CONFIG_ACX_CS)
-+ #define IS_MEM(adev)  1
-+#else
-+ #define IS_MEM(adev)   0
-+#endif
-+
-+/* Driver defaults */
-+#define DEFAULT_DTIM_INTERVAL	10
-+/* used to be 2048, but FreeBSD driver changed it to 4096 to work properly
-+** in noisy wlans */
-+#define DEFAULT_MSDU_LIFETIME	4096
-+#define DEFAULT_RTS_THRESHOLD	2312	/* max. size: disable RTS mechanism */
-+#define DEFAULT_BEACON_INTERVAL	100
-+
-+#define ACX100_BAP_DATALEN_MAX		4096
-+#define ACX100_RID_GUESSING_MAXLEN	2048	/* I'm not really sure */
-+#define ACX100_RIDDATA_MAXLEN		ACX100_RID_GUESSING_MAXLEN
-+
-+/* Support Constants */
-+/* Radio type names, found in Win98 driver's TIACXLN.INF */
-+#define RADIO_MAXIM_0D		0x0d
-+#define RADIO_RFMD_11		0x11
-+#define RADIO_RALINK_15		0x15
-+/* used in ACX111 cards (WG311v2, WL-121, ...): */
-+#define RADIO_RADIA_16		0x16
-+/* most likely *sometimes* used in ACX111 cards: */
-+#define RADIO_UNKNOWN_17	0x17
-+/* FwRad19.bin was found in a Safecom driver; must be an ACX111 radio: */
-+#define RADIO_UNKNOWN_19	0x19
-+#define RADIO_UNKNOWN_1B	0x1b    /* radio in SafeCom SWLUT-54125 USB adapter; entirely unknown!! */
-+
-+/* Controller Commands */
-+/* can be found in table cmdTable in firmware "Rev. 1.5.0" (FW150) */
-+#define ACX1xx_CMD_RESET		0x00
-+#define ACX1xx_CMD_INTERROGATE		0x01
-+#define ACX1xx_CMD_CONFIGURE		0x02
-+#define ACX1xx_CMD_ENABLE_RX		0x03
-+#define ACX1xx_CMD_ENABLE_TX		0x04
-+#define ACX1xx_CMD_DISABLE_RX		0x05
-+#define ACX1xx_CMD_DISABLE_TX		0x06
-+#define ACX1xx_CMD_FLUSH_QUEUE		0x07
-+#define ACX1xx_CMD_SCAN			0x08
-+#define ACX1xx_CMD_STOP_SCAN		0x09
-+#define ACX1xx_CMD_CONFIG_TIM		0x0a
-+#define ACX1xx_CMD_JOIN			0x0b
-+#define ACX1xx_CMD_WEP_MGMT		0x0c
-+#ifdef OLD_FIRMWARE_VERSIONS
-+#define ACX100_CMD_HALT			0x0e	/* mapped to unknownCMD in FW150 */
-+#else
-+#define ACX1xx_CMD_MEM_READ		0x0d
-+#define ACX1xx_CMD_MEM_WRITE		0x0e
-+#endif
-+#define ACX1xx_CMD_SLEEP		0x0f
-+#define ACX1xx_CMD_WAKE			0x10
-+#define ACX1xx_CMD_UNKNOWN_11		0x11	/* mapped to unknownCMD in FW150 */
-+#define ACX100_CMD_INIT_MEMORY		0x12
-+#define ACX1FF_CMD_DISABLE_RADIO	0x12	/* new firmware? TNETW1450? */
-+#define ACX1xx_CMD_CONFIG_BEACON	0x13
-+#define ACX1xx_CMD_CONFIG_PROBE_RESPONSE	0x14
-+#define ACX1xx_CMD_CONFIG_NULL_DATA	0x15
-+#define ACX1xx_CMD_CONFIG_PROBE_REQUEST	0x16
-+#define ACX1xx_CMD_FCC_TEST		0x17
-+#define ACX1xx_CMD_RADIOINIT		0x18
-+#define ACX111_CMD_RADIOCALIB		0x19
-+#define ACX1FF_CMD_NOISE_HISTOGRAM	0x1c /* new firmware? TNETW1450? */
-+#define ACX1FF_CMD_RX_RESET		0x1d /* new firmware? TNETW1450? */
-+#define ACX1FF_CMD_LNA_CONTROL		0x20 /* new firmware? TNETW1450? */
-+#define ACX1FF_CMD_CONTROL_DBG_TRACE	0x21 /* new firmware? TNETW1450? */
-+
-+/* 'After Interrupt' Commands */
-+#define ACX_AFTER_IRQ_CMD_STOP_SCAN	0x01
-+#define ACX_AFTER_IRQ_CMD_ASSOCIATE	0x02
-+#define ACX_AFTER_IRQ_CMD_RADIO_RECALIB	0x04
-+#define ACX_AFTER_IRQ_UPDATE_CARD_CFG	0x08
-+#define ACX_AFTER_IRQ_TX_CLEANUP	0x10
-+#define ACX_AFTER_IRQ_COMPLETE_SCAN	0x20
-+#define ACX_AFTER_IRQ_RESTART_SCAN	0x40
-+
-+/***********************************************************************
-+** Tx/Rx buffer sizes and watermarks
-+**
-+** This will alloc and use DMAable buffers of
-+** WLAN_A4FR_MAXLEN_WEP_FCS * (RX_CNT + TX_CNT) bytes
-+** RX/TX_CNT=32 -> ~150k DMA buffers
-+** RX/TX_CNT=16 -> ~75k DMA buffers
-+**
-+** 2005-10-10: reduced memory usage by lowering both to 16
-+*/
-+#define RX_CNT 16
-+#define TX_CNT 16
-+
-+/* we clean up txdescs when we have N free txdesc: */
-+#define TX_CLEAN_BACKLOG (TX_CNT/4)
-+#define TX_START_CLEAN (TX_CNT - TX_CLEAN_BACKLOG)
-+#define TX_EMERG_CLEAN 2
-+/* we stop queue if we have < N free txbufs: */
-+#define TX_STOP_QUEUE 3
-+/* we start queue if we have >= N free txbufs: */
-+#define TX_START_QUEUE 5
-+
-+/***********************************************************************
-+** Interrogate/Configure cmd constants
-+**
-+** NB: length includes JUST the data part of the IE
-+** (does not include size of the (type,len) pair)
-+**
-+** TODO: seems that acx100, acx100usb, acx111 have some differences,
-+** fix code with regard to this!
-+*/
-+
-+#define DEF_IE(name, val, len) enum { ACX##name=val, ACX##name##_LEN=len }
-+
-+/* Information Elements: Network Parameters, Static Configuration Entities */
-+/* these are handled by real_cfgtable in firmware "Rev 1.5.0" (FW150) */
-+DEF_IE(1xx_IE_UNKNOWN_00		,0x0000, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(100_IE_ACX_TIMER			,0x0001, 0x10);
-+DEF_IE(1xx_IE_POWER_MGMT		,0x0002, 0x06); /* TNETW1450: length 0x18!! */
-+DEF_IE(1xx_IE_QUEUE_CONFIG		,0x0003, 0x1c);
-+DEF_IE(100_IE_BLOCK_SIZE		,0x0004, 0x02);
-+DEF_IE(1FF_IE_SLOT_TIME			,0x0004, 0x08); /* later firmware versions only? */
-+DEF_IE(1xx_IE_MEMORY_CONFIG_OPTIONS	,0x0005, 0x14);
-+DEF_IE(1FF_IE_QUEUE_HEAD		,0x0005, 0x14 /* FIXME: length? */);
-+DEF_IE(1xx_IE_RATE_FALLBACK		,0x0006, 0x01); /* TNETW1450: length 2 */
-+DEF_IE(100_IE_WEP_OPTIONS		,0x0007, 0x03);
-+DEF_IE(111_IE_RADIO_BAND		,0x0007, -1);
-+DEF_IE(1FF_IE_TIMING_CFG		,0x0007, -1);	/* later firmware versions; TNETW1450 only? */
-+DEF_IE(100_IE_SSID			,0x0008, 0x20); /* huh? */
-+DEF_IE(1xx_IE_MEMORY_MAP		,0x0008, 0x28); /* huh? TNETW1450 has length 0x40!! */
-+DEF_IE(1xx_IE_SCAN_STATUS		,0x0009, 0x04); /* mapped to cfgInvalid in FW150 */
-+DEF_IE(1xx_IE_ASSOC_ID			,0x000a, 0x02);
-+DEF_IE(1xx_IE_UNKNOWN_0B		,0x000b, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1FF_IE_TX_POWER_LEVEL_TABLE	,0x000b, 0x18); /* later firmware versions; TNETW1450 only? */
-+DEF_IE(100_IE_UNKNOWN_0C		,0x000c, -1);	/* very small implementation in FW150! */
-+/* ACX100 has an equivalent struct in the cmd mailbox directly after reset.
-+ * 0x14c seems extremely large, will trash stack on failure (memset!)
-+ * in case of small input struct --> OOPS! */
-+DEF_IE(111_IE_CONFIG_OPTIONS		,0x000c, 0x14c);
-+DEF_IE(1xx_IE_FWREV			,0x000d, 0x18);
-+DEF_IE(1xx_IE_FCS_ERROR_COUNT		,0x000e, 0x04);
-+DEF_IE(1xx_IE_MEDIUM_USAGE		,0x000f, 0x08);
-+DEF_IE(1xx_IE_RXCONFIG			,0x0010, 0x04);
-+DEF_IE(100_IE_UNKNOWN_11		,0x0011, -1);	/* NONBINARY: large implementation in FW150! link quality readings or so? */
-+DEF_IE(111_IE_QUEUE_THRESH		,0x0011, -1);
-+DEF_IE(100_IE_UNKNOWN_12		,0x0012, -1);	/* NONBINARY: VERY large implementation in FW150!! */
-+DEF_IE(111_IE_BSS_POWER_SAVE		,0x0012, /* -1 */ 2);
-+DEF_IE(1xx_IE_FIRMWARE_STATISTICS	,0x0013, 0x9c); /* TNETW1450: length 0x134!! */
-+DEF_IE(1FF_IE_RX_INTR_CONFIG		,0x0014, 0x14); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1xx_IE_FEATURE_CONFIG		,0x0015, 0x08);
-+DEF_IE(111_IE_KEY_CHOOSE		,0x0016, 0x04);	/* for rekeying. really len=4?? */
-+DEF_IE(1FF_IE_MISC_CONFIG_TABLE		,0x0017, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_WONE_CONFIG		,0x0018, -1);	/* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_TID_CONFIG		,0x001a, 0x2c); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_CALIB_ASSESSMENT		,0x001e, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_BEACON_FILTER_OPTIONS	,0x001f, 0x02); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_LOW_RSSI_THRESH_OPT	,0x0020, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_NOISE_HISTOGRAM_RESULTS	,0x0021, 0x30); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_PACKET_DETECT_THRESH	,0x0023, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_TX_CONFIG_OPTIONS		,0x0024, 0x04); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_CCA_THRESHOLD		,0x0025, 0x02); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_EVENT_MASK		,0x0026, 0x08); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_DTIM_PERIOD		,0x0027, 0x02); /* later firmware versions, TNETW1450 only? */
-+DEF_IE(1FF_IE_ACI_CONFIG_SET		,0x0029, 0x06); /* later firmware versions; maybe TNETW1450 only? */
-+DEF_IE(1FF_IE_EEPROM_VER		,0x0030, 0x04); /* later firmware versions; maybe TNETW1450 only? */
-+DEF_IE(1xx_IE_DOT11_STATION_ID		,0x1001, 0x06);
-+DEF_IE(100_IE_DOT11_UNKNOWN_1002	,0x1002, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(111_IE_DOT11_FRAG_THRESH		,0x1002, -1);	/* mapped to cfgInvalid in FW150; TNETW1450 has length 2!! */
-+DEF_IE(100_IE_DOT11_BEACON_PERIOD	,0x1003, 0x02);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1xx_IE_DOT11_DTIM_PERIOD		,0x1004, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1FF_IE_DOT11_MAX_RX_LIFETIME	,0x1004, -1);	/* later firmware versions; maybe TNETW1450 only? */
-+DEF_IE(1xx_IE_DOT11_SHORT_RETRY_LIMIT	,0x1005, 0x01); /* TNETW1450: length 2 */
-+DEF_IE(1xx_IE_DOT11_LONG_RETRY_LIMIT	,0x1006, 0x01); /* TNETW1450: length 2 */
-+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE	,0x1007, 0x20);	/* configure default keys; TNETW1450 has length 0x24!! */
-+DEF_IE(1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME	,0x1008, 0x04);
-+DEF_IE(1xx_IE_DOT11_GROUP_ADDR		,0x1009, -1);
-+DEF_IE(1xx_IE_DOT11_CURRENT_REG_DOMAIN	,0x100a, 0x02);
-+/* It's harmless to have larger struct. Use USB case always. */
-+DEF_IE(1xx_IE_DOT11_CURRENT_ANTENNA	,0x100b, 0x02);	/* in fact len=1 for PCI */
-+DEF_IE(1xx_IE_DOT11_UNKNOWN_100C	,0x100c, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1xx_IE_DOT11_TX_POWER_LEVEL	,0x100d, 0x01); /* TNETW1450 has length 2!! */
-+DEF_IE(1xx_IE_DOT11_CURRENT_CCA_MODE	,0x100e, 0x02);	/* in fact len=1 for PCI */
-+/* USB doesn't return anything - len==0?! */
-+DEF_IE(100_IE_DOT11_ED_THRESHOLD	,0x100f, 0x04);
-+DEF_IE(1xx_IE_DOT11_WEP_DEFAULT_KEY_SET	,0x1010, 0x01);	/* set default key ID; TNETW1450: length 2 */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1011	,0x1011, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(1FF_IE_DOT11_CURR_5GHZ_REGDOM	,0x1011, -1);	/* later firmware versions; maybe TNETW1450 only? */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1012	,0x1012, -1);	/* mapped to cfgInvalid in FW150 */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1013	,0x1013, -1);	/* mapped to cfgInvalid in FW150 */
-+
-+#if 0
-+/* Experimentally obtained on acx100, fw 1.9.8.b
-+** -1 means that fw returned 'invalid IE'
-+** 0200 FC00 nnnn... are test read contents: u16 type, u16 len, data
-+** (AA are poison bytes marking bytes not written by fw)
-+**
-+** Looks like acx100 fw does not update len field (thus len=256-4=FC here)
-+** A number of IEs seem to trash type,len fields
-+** IEs marked 'huge' return gobs of data (no poison bytes remain)
-+*/
-+DEF_IE(100_IE_INVAL_00,			0x0000, -1);
-+DEF_IE(100_IE_INVAL_01,			0x0001, -1);	/* IE_ACX_TIMER, len=16 on older fw */
-+DEF_IE(100_IE_POWER_MGMT,		0x0002, 4);	/* 0200FC00 00040000 AAAAAAAA */
-+DEF_IE(100_IE_QUEUE_CONFIG,		0x0003, 28);	/* 0300FC00 48060000 9CAD0000 0101AAAA DCB00000 E4B00000 9CAA0000 00AAAAAA */
-+DEF_IE(100_IE_BLOCK_SIZE,		0x0004, 2);	/* 0400FC00 0001AAAA AAAAAAAA AAAAAAAA */
-+/* write only: */
-+DEF_IE(100_IE_MEMORY_CONFIG_OPTIONS,	0x0005, 20);
-+DEF_IE(100_IE_RATE_FALLBACK,		0x0006, 1);	/* 0600FC00 00AAAAAA AAAAAAAA AAAAAAAA */
-+/* write only: */
-+DEF_IE(100_IE_WEP_OPTIONS,		0x0007, 3);
-+DEF_IE(100_IE_MEMORY_MAP,		0x0008, 40);	/* huge: 0800FC00 30000000 6CA20000 70A20000... */
-+/* gives INVAL on read: */
-+DEF_IE(100_IE_SCAN_STATUS,		0x0009, -1);
-+DEF_IE(100_IE_ASSOC_ID,			0x000a, 2);	/* huge: 0A00FC00 00000000 01040800 00000000... */
-+DEF_IE(100_IE_INVAL_0B,			0x000b, -1);
-+/* 'command rejected': */
-+DEF_IE(100_IE_CONFIG_OPTIONS,		0x000c, -3);
-+DEF_IE(100_IE_FWREV,			0x000d, 24);	/* 0D00FC00 52657620 312E392E 382E6200 AAAAAAAA AAAAAAAA 05050201 AAAAAAAA */
-+DEF_IE(100_IE_FCS_ERROR_COUNT,		0x000e, 4);
-+DEF_IE(100_IE_MEDIUM_USAGE,		0x000f, 8);	/* E41F0000 2D780300 FCC91300 AAAAAAAA */
-+DEF_IE(100_IE_RXCONFIG,			0x0010, 4);	/* 1000FC00 00280000 AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_QUEUE_THRESH,		0x0011, 12);	/* 1100FC00 AAAAAAAA 00000000 00000000 */
-+DEF_IE(100_IE_BSS_POWER_SAVE,		0x0012, 1);	/* 1200FC00 00AAAAAA AAAAAAAA AAAAAAAA */
-+/* read only, variable len */
-+DEF_IE(100_IE_FIRMWARE_STATISTICS,	0x0013, 256); /* 0000AC00 00000000 ... */
-+DEF_IE(100_IE_INT_CONFIG,		0x0014, 20);	/* 00000000 00000000 00000000 00000000 5D74D105 00000000 AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_FEATURE_CONFIG,		0x0015, 8);	/* 1500FC00 16000000 AAAAAAAA AAAAAAAA */
-+/* returns 'invalid MAC': */
-+DEF_IE(100_IE_KEY_CHOOSE,		0x0016, -4);
-+DEF_IE(100_IE_INVAL_17,			0x0017, -1);
-+DEF_IE(100_IE_UNKNOWN_18,		0x0018, 0);	/* null len?! 1800FC00 AAAAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_UNKNOWN_19,		0x0019, 256);	/* huge: 1900FC00 9C1F00EA FEFFFFEA FEFFFFEA... */
-+DEF_IE(100_IE_INVAL_1A,			0x001A, -1);
-+
-+DEF_IE(100_IE_DOT11_INVAL_1000,			0x1000, -1);
-+DEF_IE(100_IE_DOT11_STATION_ID,			0x1001, 6);	/* huge: 0110FC00 58B10E2F 03000000 00000000... */
-+DEF_IE(100_IE_DOT11_INVAL_1002,			0x1002, -1);
-+DEF_IE(100_IE_DOT11_INVAL_1003,			0x1003, -1);
-+DEF_IE(100_IE_DOT11_INVAL_1004,			0x1004, -1);
-+DEF_IE(100_IE_DOT11_SHORT_RETRY_LIMIT,		0x1005, 1);
-+DEF_IE(100_IE_DOT11_LONG_RETRY_LIMIT,		0x1006, 1);
-+/* write only: */
-+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE,	0x1007, 32);
-+DEF_IE(100_IE_DOT11_MAX_XMIT_MSDU_LIFETIME,	0x1008, 4);	/* huge: 0810FC00 00020000 F4010000 00000000... */
-+/* undoc but returns something */
-+DEF_IE(100_IE_DOT11_GROUP_ADDR,			0x1009, 12);	/* huge: 0910FC00 00000000 00000000 00000000... */
-+DEF_IE(100_IE_DOT11_CURRENT_REG_DOMAIN,		0x100a, 1);	/* 0A10FC00 30AAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_CURRENT_ANTENNA,		0x100b, 1);	/* 0B10FC00 8FAAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_INVAL_100C,			0x100c, -1);
-+DEF_IE(100_IE_DOT11_TX_POWER_LEVEL,		0x100d, 2);	/* 00000000 0100AAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_CURRENT_CCA_MODE,		0x100e, 1);	/* 0E10FC00 0DAAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_ED_THRESHOLD,		0x100f, 4);	/* 0F10FC00 70000000 AAAAAAAA AAAAAAAA */
-+/* set default key ID  */
-+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_SET,	0x1010, 1);	/* 1010FC00 00AAAAAA AAAAAAAA AAAAAAAA */
-+DEF_IE(100_IE_DOT11_INVAL_1011,			0x1011, -1);
-+DEF_IE(100_IE_DOT11_INVAL_1012,			0x1012, -1);
-+DEF_IE(100_IE_DOT11_INVAL_1013,			0x1013, -1);
-+DEF_IE(100_IE_DOT11_UNKNOWN_1014,		0x1014, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1015,		0x1015, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1016,		0x1016, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1017,		0x1017, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1018,		0x1018, 256);	/* huge */
-+DEF_IE(100_IE_DOT11_UNKNOWN_1019,		0x1019, 256);	/* huge */
-+#endif
-+
-+#if 0
-+/* Experimentally obtained on PCI acx111 Xterasys XN-2522g, fw 1.2.1.34
-+** -1 means that fw returned 'invalid IE'
-+** 0400 0800 nnnn... are test read contents: u16 type, u16 len, data
-+** (AA are poison bytes marking bytes not written by fw)
-+**
-+** Looks like acx111 fw reports real len!
-+*/
-+DEF_IE(111_IE_INVAL_00,			0x0000, -1);
-+DEF_IE(111_IE_INVAL_01,			0x0001, -1);
-+DEF_IE(111_IE_POWER_MGMT,		0x0002, 12);
-+/* write only, variable len: 12 + rxqueue_cnt*8 + txqueue_cnt*4: */
-+DEF_IE(111_IE_MEMORY_CONFIG,		0x0003, 24);
-+DEF_IE(111_IE_BLOCK_SIZE,		0x0004, 8); /* 04000800 AA00AAAA AAAAAAAA */
-+/* variable len: 8 + rxqueue_cnt*8 + txqueue_cnt*8: */
-+DEF_IE(111_IE_QUEUE_HEAD,		0x0005, 24);
-+DEF_IE(111_IE_RATE_FALLBACK,		0x0006, 1);
-+/* acx100 name:WEP_OPTIONS */
-+/* said to have len:1 (not true, actually returns 12 bytes): */
-+DEF_IE(111_IE_RADIO_BAND,		0x0007, 12); /* 07000C00 AAAA1F00 FF03AAAA AAAAAAAA */
-+DEF_IE(111_IE_MEMORY_MAP,		0x0008, 48);
-+/* said to have len:4, but gives INVAL on read: */
-+DEF_IE(111_IE_SCAN_STATUS,		0x0009, -1);
-+DEF_IE(111_IE_ASSOC_ID,			0x000a, 2);
-+/* write only, len is not known: */
-+DEF_IE(111_IE_UNKNOWN_0B,		0x000b, 0);
-+/* read only, variable len. I see 67 byte reads: */
-+DEF_IE(111_IE_CONFIG_OPTIONS,		0x000c, 67); /* 0C004300 01160500 ... */
-+DEF_IE(111_IE_FWREV,			0x000d, 24);
-+DEF_IE(111_IE_FCS_ERROR_COUNT,		0x000e, 4);
-+DEF_IE(111_IE_MEDIUM_USAGE,		0x000f, 8);
-+DEF_IE(111_IE_RXCONFIG,			0x0010, 4);
-+DEF_IE(111_IE_QUEUE_THRESH,		0x0011, 12);
-+DEF_IE(111_IE_BSS_POWER_SAVE,		0x0012, 1);
-+/* read only, variable len. I see 240 byte reads: */
-+DEF_IE(111_IE_FIRMWARE_STATISTICS,	0x0013, 240); /* 1300F000 00000000 ... */
-+/* said to have len=17. looks like fw pads it to 20: */
-+DEF_IE(111_IE_INT_CONFIG,		0x0014, 20); /* 14001400 00000000 00000000 00000000 00000000 00000000 */
-+DEF_IE(111_IE_FEATURE_CONFIG,		0x0015, 8);
-+/* said to be name:KEY_INDICATOR, len:4, but gives INVAL on read: */
-+DEF_IE(111_IE_KEY_CHOOSE,		0x0016, -1);
-+/* said to have len:4, but in fact returns 8: */
-+DEF_IE(111_IE_MAX_USB_XFR,		0x0017, 8); /* 17000800 00014000 00000000 */
-+DEF_IE(111_IE_INVAL_18,			0x0018, -1);
-+DEF_IE(111_IE_INVAL_19,			0x0019, -1);
-+/* undoc but returns something: */
-+/* huh, fw indicates len=20 but uses 4 more bytes in buffer??? */
-+DEF_IE(111_IE_UNKNOWN_1A,		0x001A, 20); /* 1A001400 AA00AAAA 0000020F FF030000 00020000 00000007 04000000 */
-+
-+DEF_IE(111_IE_DOT11_INVAL_1000,			0x1000, -1);
-+DEF_IE(111_IE_DOT11_STATION_ID,			0x1001, 6);
-+DEF_IE(111_IE_DOT11_FRAG_THRESH,		0x1002, 2);
-+/* acx100 only? gives INVAL on read: */
-+DEF_IE(111_IE_DOT11_BEACON_PERIOD,		0x1003, -1);
-+/* said to be MAX_RECV_MSDU_LIFETIME: */
-+DEF_IE(111_IE_DOT11_DTIM_PERIOD,		0x1004, 4);
-+DEF_IE(111_IE_DOT11_SHORT_RETRY_LIMIT,		0x1005, 1);
-+DEF_IE(111_IE_DOT11_LONG_RETRY_LIMIT,		0x1006, 1);
-+/* acx100 only? gives INVAL on read: */
-+DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_WRITE,	0x1007, -1);
-+DEF_IE(111_IE_DOT11_MAX_XMIT_MSDU_LIFETIME,	0x1008, 4);
-+/* undoc but returns something. maybe it's 2 multicast MACs to listen to? */
-+DEF_IE(111_IE_DOT11_GROUP_ADDR,			0x1009, 12); /* 09100C00 00000000 00000000 00000000 */
-+DEF_IE(111_IE_DOT11_CURRENT_REG_DOMAIN,		0x100a, 1);
-+DEF_IE(111_IE_DOT11_CURRENT_ANTENNA,		0x100b, 2);
-+DEF_IE(111_IE_DOT11_INVAL_100C,			0x100c, -1);
-+DEF_IE(111_IE_DOT11_TX_POWER_LEVEL,		0x100d, 1);
-+/* said to have len=1 but gives INVAL on read: */
-+DEF_IE(111_IE_DOT11_CURRENT_CCA_MODE,		0x100e, -1);
-+/* said to have len=4 but gives INVAL on read: */
-+DEF_IE(111_IE_DOT11_ED_THRESHOLD,		0x100f, -1);
-+/* set default key ID. write only: */
-+DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_SET,	0x1010, 1);
-+/* undoc but returns something: */
-+DEF_IE(111_IE_DOT11_UNKNOWN_1011,		0x1011, 1); /* 11100100 20 */
-+DEF_IE(111_IE_DOT11_INVAL_1012,			0x1012, -1);
-+DEF_IE(111_IE_DOT11_INVAL_1013,			0x1013, -1);
-+#endif
-+
-+
-+/***********************************************************************
-+**Information Frames Structures
-+*/
-+
-+/* Used in beacon frames and the like */
-+#define DOT11RATEBYTE_1		(1*2)
-+#define DOT11RATEBYTE_2		(2*2)
-+#define DOT11RATEBYTE_5_5	(5*2+1)
-+#define DOT11RATEBYTE_11	(11*2)
-+#define DOT11RATEBYTE_22	(22*2)
-+#define DOT11RATEBYTE_6_G	(6*2)
-+#define DOT11RATEBYTE_9_G	(9*2)
-+#define DOT11RATEBYTE_12_G	(12*2)
-+#define DOT11RATEBYTE_18_G	(18*2)
-+#define DOT11RATEBYTE_24_G	(24*2)
-+#define DOT11RATEBYTE_36_G	(36*2)
-+#define DOT11RATEBYTE_48_G	(48*2)
-+#define DOT11RATEBYTE_54_G	(54*2)
-+#define DOT11RATEBYTE_BASIC	0x80	/* flags rates included in basic rate set */
-+
-+
-+/***********************************************************************
-+** rxbuffer_t
-+**
-+** This is the format of rx data returned by acx
-+*/
-+
-+/* I've hoped it's a 802.11 PHY header, but no...
-+ * so far, I've seen on acx111:
-+ * 0000 3a00 0000 0000 IBSS Beacons
-+ * 0000 3c00 0000 0000 ESS Beacons
-+ * 0000 2700 0000 0000 Probe requests
-+ * --vda
-+ */
-+typedef struct phy_hdr {
-+	u8	unknown[4];
-+	u8	acx111_unknown[4];
-+} ACX_PACKED phy_hdr_t;
-+
-+/* seems to be a bit similar to hfa384x_rx_frame.
-+ * These fields are still not quite obvious, though.
-+ * Some seem to have different meanings... */
-+
-+#define RXBUF_HDRSIZE 12
-+#define RXBUF_BYTES_RCVD(adev, rxbuf) \
-+		((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) - (adev)->phy_header_len)
-+#define RXBUF_BYTES_USED(rxbuf) \
-+		((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) + RXBUF_HDRSIZE)
-+/* USBism */
-+#define RXBUF_IS_TXSTAT(rxbuf) (le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0x8000)
-+/*
-+mac_cnt_rcvd:
-+    12 bits: length of frame from control field to first byte of FCS
-+    3 bits: reserved
-+    1 bit: 1 = it's a tx status info, not a rx packet (USB only)
-+
-+mac_cnt_mblks:
-+    6 bits: number of memory block used to store frame in adapter memory
-+    1 bit: Traffic Indicator bit in TIM of received Beacon was set
-+
-+mac_status: 1 byte (bitmap):
-+    7 Matching BSSID
-+    6 Matching SSID
-+    5 BDCST	Address 1 field is a broadcast
-+    4 VBM	received beacon frame has more than one set bit (?!)
-+    3 TIM Set	bit representing this station is set in TIM of received beacon
-+    2 GROUP	Address 1 is a multicast
-+    1 ADDR1	Address 1 matches our MAC
-+    0 FCSGD	FSC is good
-+
-+phy_stat_baseband: 1 byte (bitmap):
-+    7 Preamble		frame had a long preamble
-+    6 PLCP Error	CRC16 error in PLCP header
-+    5 Unsup_Mod		unsupported modulation
-+    4 Selected Antenna	antenna 1 was used to receive this frame
-+    3 PBCC/CCK		frame used: 1=PBCC, 0=CCK modulation
-+    2 OFDM		frame used OFDM modulation
-+    1 TI Protection	protection frame was detected
-+    0 Reserved
-+
-+phy_plcp_signal: 1 byte:
-+    Receive PLCP Signal field from the Baseband Processor
-+
-+phy_level: 1 byte:
-+    receive AGC gain level (can be used to measure receive signal strength)
-+
-+phy_snr: 1 byte:
-+    estimated noise power of equalized receive signal
-+    at input of FEC decoder (can be used to measure receive signal quality)
-+
-+time: 4 bytes:
-+    timestamp sampled from either the Access Manager TSF counter
-+    or free-running microsecond counter when the MAC receives
-+    first byte of PLCP header.
-+*/
-+
-+typedef struct rxbuffer {
-+	u16	mac_cnt_rcvd;		/* only 12 bits are len! (0xfff) */
-+	u8	mac_cnt_mblks;
-+	u8	mac_status;
-+	u8	phy_stat_baseband;	/* bit 0x80: used LNA (Low-Noise Amplifier) */
-+	u8	phy_plcp_signal;
-+	u8	phy_level;		/* PHY stat */
-+	u8	phy_snr;		/* PHY stat */
-+	u32	time;			/* timestamp upon MAC rcv first byte */
-+/* 4-byte (acx100) or 8-byte (acx111) phy header will be here
-+** if RX_CFG1_INCLUDE_PHY_HDR is in effect:
-+**	phy_hdr_t phy			*/
-+	wlan_hdr_a3_t hdr_a3;
-+	/* maximally sized data part of wlan packet */
-+	u8	data_a3[WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN];
-+	/* can add hdr/data_a4 if needed */
-+} ACX_PACKED rxbuffer_t;
-+
-+
-+/*--- Firmware statistics ----------------------------------------------------*/
-+
-+/* define a random 100 bytes more to catch firmware versions which
-+ * provide a bigger struct */
-+#define FW_STATS_FUTURE_EXTENSION	100
-+
-+typedef struct fw_stats_tx {
-+	u32	tx_desc_of;
-+} ACX_PACKED fw_stats_tx_t;
-+
-+typedef struct fw_stats_rx {
-+	u32	rx_oom;
-+	u32	rx_hdr_of;
-+	u32	rx_hw_stuck; /* old: u32	rx_hdr_use_next */
-+	u32	rx_dropped_frame;
-+	u32	rx_frame_ptr_err;
-+	u32	rx_xfr_hint_trig;
-+	u32	rx_aci_events; /* later versions only */
-+	u32	rx_aci_resets; /* later versions only */
-+} ACX_PACKED fw_stats_rx_t;
-+
-+typedef struct fw_stats_dma {
-+	u32	rx_dma_req;
-+	u32	rx_dma_err;
-+	u32	tx_dma_req;
-+	u32	tx_dma_err;
-+} ACX_PACKED fw_stats_dma_t;
-+
-+typedef struct fw_stats_irq {
-+	u32	cmd_cplt;
-+	u32	fiq;
-+	u32	rx_hdrs;
-+	u32	rx_cmplt;
-+	u32	rx_mem_of;
-+	u32	rx_rdys;
-+	u32	irqs;
-+	u32	tx_procs;
-+	u32	decrypt_done;
-+	u32	dma_0_done;
-+	u32	dma_1_done;
-+	u32	tx_exch_complet;
-+	u32	commands;
-+	u32	rx_procs;
-+	u32	hw_pm_mode_changes;
-+	u32	host_acks;
-+	u32	pci_pm;
-+	u32	acm_wakeups;
-+} ACX_PACKED fw_stats_irq_t;
-+
-+typedef struct fw_stats_wep {
-+	u32	wep_key_count;
-+	u32	wep_default_key_count;
-+	u32	dot11_def_key_mib;
-+	u32	wep_key_not_found;
-+	u32	wep_decrypt_fail;
-+	u32	wep_pkt_decrypt;
-+	u32	wep_decrypt_irqs;
-+} ACX_PACKED fw_stats_wep_t;
-+
-+typedef struct fw_stats_pwr {
-+	u32	tx_start_ctr;
-+	u32	no_ps_tx_too_short;
-+	u32	rx_start_ctr;
-+	u32	no_ps_rx_too_short;
-+	u32	lppd_started;
-+	u32	no_lppd_too_noisy;
-+	u32	no_lppd_too_short;
-+	u32	no_lppd_matching_frame;
-+} ACX_PACKED fw_stats_pwr_t;
-+
-+typedef struct fw_stats_mic {
-+	u32 mic_rx_pkts;
-+	u32 mic_calc_fail;
-+} ACX_PACKED fw_stats_mic_t;
-+
-+typedef struct fw_stats_aes {
-+	u32 aes_enc_fail;
-+	u32 aes_dec_fail;
-+	u32 aes_enc_pkts;
-+	u32 aes_dec_pkts;
-+	u32 aes_enc_irq;
-+	u32 aes_dec_irq;
-+} ACX_PACKED fw_stats_aes_t;
-+
-+typedef struct fw_stats_event {
-+	u32 heartbeat;
-+	u32 calibration;
-+	u32 rx_mismatch;
-+	u32 rx_mem_empty;
-+	u32 rx_pool;
-+	u32 oom_late;
-+	u32 phy_tx_err;
-+	u32 tx_stuck;
-+} ACX_PACKED fw_stats_event_t;
-+
-+/* mainly for size calculation only */
-+typedef struct fw_stats {
-+	u16			type;
-+	u16			len;
-+	fw_stats_tx_t		tx;
-+	fw_stats_rx_t		rx;
-+	fw_stats_dma_t		dma;
-+	fw_stats_irq_t		irq;
-+	fw_stats_wep_t		wep;
-+	fw_stats_pwr_t		pwr;
-+	fw_stats_mic_t		mic;
-+	fw_stats_aes_t		aes;
-+	fw_stats_event_t	evt;
-+	u8			_padding[FW_STATS_FUTURE_EXTENSION];
-+} fw_stats_t;
-+
-+/* Firmware version struct */
-+
-+typedef struct fw_ver {
-+	u16	cmd;
-+	u16	size;
-+	char	fw_id[20];
-+	u32	hw_id;
-+} ACX_PACKED fw_ver_t;
-+
-+#define FW_ID_SIZE 20
-+
-+typedef struct shared_queueindicator {
-+        u32     indicator;
-+        u16     host_lock;
-+        u16     fw_lock;
-+} ACX_PACKED queueindicator_t;
-+
-+/*--- WEP stuff --------------------------------------------------------------*/
-+#define DOT11_MAX_DEFAULT_WEP_KEYS	4
-+
-+/* non-firmware struct, no packing necessary */
-+typedef struct wep_key {
-+	size_t	size; /* most often used member first */
-+	u8	index;
-+	u8	key[29];
-+	u16	strange_filler;
-+} wep_key_t;			/* size = 264 bytes (33*8) */
-+/* FIXME: We don't have size 264! Or is there 2 bytes beyond the key
-+ * (strange_filler)? */
-+
-+/* non-firmware struct, no packing necessary */
-+typedef struct key_struct {
-+	u8	addr[ETH_ALEN];	/* 0x00 */
-+	u16	filler1;	/* 0x06 */
-+	u32	filler2;	/* 0x08 */
-+	u32	index;		/* 0x0c */
-+	u16	len;		/* 0x10 */
-+	u8	key[29];	/* 0x12; is this long enough??? */
-+} key_struct_t;			/* size = 276. FIXME: where is the remaining space?? */
-+
-+
-+/*--- Client (peer) info -----------------------------------------------------*/
-+/* adev->sta_list[] is used for:
-+** accumulating and processing of scan results
-+** keeping client info in AP mode
-+** keeping AP info in STA mode (AP is the only one 'client')
-+** keeping peer info in ad-hoc mode
-+** non-firmware struct --> no packing necessary */
-+enum {
-+	CLIENT_EMPTY_SLOT_0 = 0,
-+	CLIENT_EXIST_1 = 1,
-+	CLIENT_AUTHENTICATED_2 = 2,
-+	CLIENT_ASSOCIATED_3 = 3,
-+	CLIENT_JOIN_CANDIDATE = 4
-+};
-+struct client {
-+	/* most frequent access first */
-+	u8	used;			/* misnamed, more like 'status' */
-+	struct client*	next;
-+	unsigned long	mtime;		/* last time we heard it, in jiffies */
-+	size_t	essid_len;		/* length of ESSID (without '\0') */
-+	u32	sir;			/* Standard IR */
-+	u32	snr;			/* Signal to Noise Ratio */
-+	u16	aid;			/* association ID */
-+	u16	seq;			/* from client's auth req */
-+	u16	auth_alg;		/* from client's auth req */
-+	u16	cap_info;		/* from client's assoc req */
-+	u16	rate_cap;		/* what client supports (all rates) */
-+	u16	rate_bas;		/* what client supports (basic rates) */
-+	u16	rate_cfg;		/* what is allowed (by iwconfig etc) */
-+	u16	rate_cur;		/* currently used rate mask */
-+	u8	rate_100;		/* currently used rate byte (acx100 only) */
-+	u8	address[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];	/* ad-hoc hosts can have bssid != mac */
-+	u8	channel;
-+	u8	auth_step;
-+	u8	ignore_count;
-+	u8	fallback_count;
-+	u8	stepup_count;
-+	char	essid[IW_ESSID_MAX_SIZE + 1];	/* ESSID and trailing '\0'  */
-+/* FIXME: this one is too damn big */
-+	char	challenge_text[WLAN_CHALLENGE_LEN];
-+};
-+
-+
-+/***********************************************************************
-+** Hardware structures
-+*/
-+
-+/* An opaque typesafe helper type
-+ *
-+ * Some hardware fields are actually pointers,
-+ * but they have to remain u32, since using ptr instead
-+ * (8 bytes on 64bit systems!) would disrupt the fixed descriptor
-+ * format the acx firmware expects in the non-user area.
-+ * Since we cannot cram an 8 byte ptr into 4 bytes, we need to
-+ * enforce that pointed to data remains in low memory
-+ * (address value needs to fit in 4 bytes) on 64bit systems.
-+ *
-+ * This is easy to get wrong, thus we are using a small struct
-+ * and special macros to access it. Macros will check for
-+ * attempts to overflow an acx_ptr with value > 0xffffffff.
-+ *
-+ * Attempts to use acx_ptr without macros result in compile-time errors */
-+
-+typedef struct {
-+	u32	v;
-+} ACX_PACKED acx_ptr;
-+
-+#if ACX_DEBUG
-+#define CHECK32(n) BUG_ON(sizeof(n)>4 && (long)(n)>0xffffff00)
-+#else
-+#define CHECK32(n) ((void)0)
-+#endif
-+
-+/* acx_ptr <-> integer conversion */
-+#define cpu2acx(n) ({ CHECK32(n); ((acx_ptr){ .v = cpu_to_le32(n) }); })
-+#define acx2cpu(a) (le32_to_cpu(a.v))
-+
-+/* acx_ptr <-> pointer conversion */
-+#define ptr2acx(p) ({ CHECK32(p); ((acx_ptr){ .v = cpu_to_le32((u32)(long)(p)) }); })
-+#define acx2ptr(a) ((void*)le32_to_cpu(a.v))
-+
-+/* Values for rate field (acx100 only) */
-+#define RATE100_1		10
-+#define RATE100_2		20
-+#define RATE100_5		55
-+#define RATE100_11		110
-+#define RATE100_22		220
-+/* This bit denotes use of PBCC:
-+** (PBCC encoding is usable with 11 and 22 Mbps speeds only) */
-+#define RATE100_PBCC511		0x80
-+
-+/* Bit values for rate111 field */
-+#define RATE111_1		0x0001	/* DBPSK */
-+#define RATE111_2		0x0002	/* DQPSK */
-+#define RATE111_5		0x0004	/* CCK or PBCC */
-+#define RATE111_6		0x0008	/* CCK-OFDM or OFDM */
-+#define RATE111_9		0x0010	/* CCK-OFDM or OFDM */
-+#define RATE111_11		0x0020	/* CCK or PBCC */
-+#define RATE111_12		0x0040	/* CCK-OFDM or OFDM */
-+#define RATE111_18		0x0080	/* CCK-OFDM or OFDM */
-+#define RATE111_22		0x0100	/* PBCC */
-+#define RATE111_24		0x0200	/* CCK-OFDM or OFDM */
-+#define RATE111_36		0x0400	/* CCK-OFDM or OFDM */
-+#define RATE111_48		0x0800	/* CCK-OFDM or OFDM */
-+#define RATE111_54		0x1000	/* CCK-OFDM or OFDM */
-+#define RATE111_RESERVED	0x2000
-+#define RATE111_PBCC511		0x4000  /* PBCC mod at 5.5 or 11Mbit (else CCK) */
-+#define RATE111_SHORTPRE	0x8000  /* short preamble */
-+/* Special 'try everything' value */
-+#define RATE111_ALL		0x1fff
-+/* These bits denote acx100 compatible settings */
-+#define RATE111_ACX100_COMPAT	0x0127
-+/* These bits denote 802.11b compatible settings */
-+#define RATE111_80211B_COMPAT	0x0027
-+
-+/* Descriptor Ctl field bits
-+ * init value is 0x8e, "idle" value is 0x82 (in idle tx descs)
-+ */
-+#define DESC_CTL_SHORT_PREAMBLE	0x01	/* preamble type: 0 = long; 1 = short */
-+#define DESC_CTL_FIRSTFRAG	0x02	/* this is the 1st frag of the frame */
-+#define DESC_CTL_AUTODMA	0x04
-+#define DESC_CTL_RECLAIM	0x08	/* ready to reuse */
-+#define DESC_CTL_HOSTDONE	0x20	/* host has finished processing */
-+#define DESC_CTL_ACXDONE	0x40	/* acx has finished processing */
-+/* host owns the desc [has to be released last, AFTER modifying all other desc fields!] */
-+#define DESC_CTL_HOSTOWN	0x80
-+#define	DESC_CTL_ACXDONE_HOSTOWN (DESC_CTL_ACXDONE | DESC_CTL_HOSTOWN)
-+
-+/* Descriptor Status field
-+ */
-+#define	DESC_STATUS_FULL	(1 << 31)
-+
-+/* NB: some bits may be interesting for Monitor mode tx (aka Raw tx): */
-+#define DESC_CTL2_SEQ		0x01	/* don't increase sequence field */
-+#define DESC_CTL2_FCS		0x02	/* don't add the FCS */
-+#define DESC_CTL2_MORE_FRAG	0x04
-+#define DESC_CTL2_RETRY		0x08	/* don't increase retry field */
-+#define DESC_CTL2_POWER		0x10	/* don't increase power mgmt. field */
-+#define DESC_CTL2_RTS		0x20	/* do RTS/CTS magic before sending */
-+#define DESC_CTL2_WEP		0x40	/* encrypt this frame */
-+#define DESC_CTL2_DUR		0x80	/* don't increase duration field */
-+
-+/***********************************************************************
-+** PCI structures
-+*/
-+/* IRQ Constants
-+** (outside of "#ifdef PCI" because USB (mis)uses HOST_INT_SCAN_COMPLETE) */
-+#define HOST_INT_RX_DATA	0x0001
-+#define HOST_INT_TX_COMPLETE	0x0002
-+#define HOST_INT_TX_XFER	0x0004
-+#define HOST_INT_RX_COMPLETE	0x0008
-+#define HOST_INT_DTIM		0x0010
-+#define HOST_INT_BEACON		0x0020
-+#define HOST_INT_TIMER		0x0040
-+#define HOST_INT_KEY_NOT_FOUND	0x0080
-+#define HOST_INT_IV_ICV_FAILURE	0x0100
-+#define HOST_INT_CMD_COMPLETE	0x0200
-+#define HOST_INT_INFO		0x0400
-+#define HOST_INT_OVERFLOW	0x0800
-+#define HOST_INT_PROCESS_ERROR	0x1000
-+#define HOST_INT_SCAN_COMPLETE	0x2000
-+#define HOST_INT_FCS_THRESHOLD	0x4000
-+#define HOST_INT_UNKNOWN	0x8000
-+
-+/* Outside of "#ifdef PCI" because USB needs to know sizeof()
-+** of txdesc and rxdesc: */
-+struct txdesc {
-+	acx_ptr	pNextDesc;	/* pointer to next txdesc */
-+	acx_ptr	HostMemPtr;			/* 0x04 */
-+	acx_ptr	AcxMemPtr;			/* 0x08 */
-+	u32	tx_time;			/* 0x0c */
-+	u16	total_length;		/* 0x10 */
-+	u16	Reserved;			/* 0x12 */
-+
-+/* The following 16 bytes do not change when acx100 owns the descriptor */
-+/* BUG: fw clears last byte of this area which is supposedly reserved
-+** for driver use. amd64 blew up. We dare not use it now */
-+	u32	dummy[4];
-+
-+	u8	Ctl_8;			/* 0x24, 8bit value */
-+	u8	Ctl2_8;			/* 0x25, 8bit value */
-+	u8	error;			/* 0x26 */
-+	u8	ack_failures;		/* 0x27 */
-+
-+	union {
-+	  /*
-+	   * Packing doesn't work correctly on ARM unless unions are on
-+	   * 4 byte boundaries.
-+	   */
-+	        struct {
-+	                u8	rts_failures;		/* 0x28 */
-+	                u8	rts_ok;			/* 0x29 */
-+	                u16     d1;
-+	        } ACX_PACKED rts;
-+		struct {
-+	                u16     d1;
-+			u8	rate;	/* 0x2a */
-+			u8	queue_ctrl;	/* 0x2b */
-+		} ACX_PACKED r1;
-+		struct {
-+	                u16     d1;
-+			u16	rate111;	/* 0x2a */
-+		} ACX_PACKED r2;
-+	} ACX_PACKED u;
-+	u32	queue_info;			/* 0x2c (acx100, reserved on acx111) */
-+} ACX_PACKED;		/* size : 48 = 0x30 */
-+/* NB: acx111 txdesc structure is 4 byte larger */
-+/* All these 4 extra bytes are reserved. tx alloc code takes them into account */
-+
-+struct rxdesc {
-+	acx_ptr	pNextDesc;			/* 0x00 */
-+	acx_ptr	HostMemPtr;			/* 0x04 */
-+	acx_ptr	ACXMemPtr;			/* 0x08 */
-+	u32	rx_time;			/* 0x0c */
-+	u16	total_length;		/* 0x10 */
-+	u16	WEP_length;			/* 0x12 */
-+	u32	WEP_ofs;			/* 0x14 */
-+
-+/* the following 16 bytes do not change when acx100 owns the descriptor */
-+	u8	driverWorkspace[16];		/* 0x18 */
-+
-+	u8	Ctl_8;
-+	u8	rate;
-+	u8	error;
-+	u8	SNR;				/* Signal-to-Noise Ratio */
-+	u8	RxLevel;
-+	u8	queue_ctrl;
-+	u16	unknown;
-+	u32	unknown2;
-+} ACX_PACKED;		/* size 52 = 0x34 */
-+
-+#if defined(ACX_PCI) || defined(ACX_MEM)
-+
-+/* Register I/O offsets */
-+#define ACX100_EEPROM_ID_OFFSET	0x380
-+
-+/* please add further ACX hardware register definitions only when
-+   it turns out you need them in the driver, and please try to use
-+   firmware functionality instead, since using direct I/O access instead
-+   of letting the firmware do it might confuse the firmware's state
-+   machine */
-+
-+/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION
-+** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */
-+enum {
-+	IO_ACX_SOFT_RESET = 0,
-+
-+	IO_ACX_SLV_MEM_ADDR,
-+	IO_ACX_SLV_MEM_DATA,
-+	IO_ACX_SLV_MEM_CTL,
-+	IO_ACX_SLV_END_CTL,
-+
-+	IO_ACX_FEMR,		/* Function Event Mask */
-+
-+	IO_ACX_INT_TRIG,
-+	IO_ACX_IRQ_MASK,
-+	IO_ACX_IRQ_STATUS_NON_DES,
-+	IO_ACX_IRQ_STATUS_CLEAR, /* CLEAR = clear on read */
-+	IO_ACX_IRQ_ACK,
-+	IO_ACX_HINT_TRIG,
-+
-+	IO_ACX_ENABLE,
-+
-+	IO_ACX_EEPROM_CTL,
-+	IO_ACX_EEPROM_ADDR,
-+	IO_ACX_EEPROM_DATA,
-+	IO_ACX_EEPROM_CFG,
-+
-+	IO_ACX_PHY_ADDR,
-+	IO_ACX_PHY_DATA,
-+	IO_ACX_PHY_CTL,
-+
-+	IO_ACX_GPIO_OE,
-+
-+	IO_ACX_GPIO_OUT,
-+
-+	IO_ACX_CMD_MAILBOX_OFFS,
-+	IO_ACX_INFO_MAILBOX_OFFS,
-+	IO_ACX_EEPROM_INFORMATION,
-+
-+	IO_ACX_EE_START,
-+	IO_ACX_SOR_CFG,
-+	IO_ACX_ECPU_CTRL
-+};
-+/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION
-+** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */
-+
-+/* Values for IO_ACX_INT_TRIG register: */
-+/* inform hw that rxdesc in queue needs processing */
-+#define INT_TRIG_RXPRC		0x08
-+/* inform hw that txdesc in queue needs processing */
-+#define INT_TRIG_TXPRC		0x04
-+/* ack that we received info from info mailbox */
-+#define INT_TRIG_INFOACK	0x02
-+/* inform hw that we have filled command mailbox */
-+#define INT_TRIG_CMD		0x01
-+
-+struct txhostdesc {
-+	acx_ptr	data_phy;			/* 0x00 [u8 *] */
-+	u16	data_offset;			/* 0x04 */
-+	u16	reserved;			/* 0x06 */
-+	u16	Ctl_16;	/* 16bit value, endianness!! */
-+	u16	length;			/* 0x0a */
-+	acx_ptr	desc_phy_next;		/* 0x0c [txhostdesc *] */
-+	acx_ptr	pNext;			/* 0x10 [txhostdesc *] */
-+	u32	Status;			/* 0x14, unused on Tx */
-+/* From here on you can use this area as you want (variable length, too!) */
-+	u8	*data;
-+} ACX_PACKED;
-+
-+struct rxhostdesc {
-+	acx_ptr	data_phy;			/* 0x00 [rxbuffer_t *] */
-+	u16	data_offset;			/* 0x04 */
-+	u16	reserved;			/* 0x06 */
-+	u16	Ctl_16;			/* 0x08; 16bit value, endianness!! */
-+	u16	length;			/* 0x0a */
-+	acx_ptr	desc_phy_next;		/* 0x0c [rxhostdesc_t *] */
-+	acx_ptr	pNext;			/* 0x10 [rxhostdesc_t *] */
-+	u32	Status;			/* 0x14 */
-+/* From here on you can use this area as you want (variable length, too!) */
-+	rxbuffer_t *data;
-+} ACX_PACKED;
-+
-+#endif /* ACX_PCI */
-+
-+/***********************************************************************
-+** USB structures and constants
-+*/
-+#ifdef ACX_USB
-+
-+/* Used for usb_txbuffer.desc field */
-+#define USB_TXBUF_TXDESC	0xA
-+/* Size of header (everything up to data[]) */
-+#define USB_TXBUF_HDRSIZE	14
-+typedef struct usb_txbuffer {
-+	u16	desc;
-+	u16	mpdu_len;
-+	u8	queue_index;
-+	u8	rate;
-+	u32	hostdata;
-+	u8	ctrl1;
-+	u8	ctrl2;
-+	u16	data_len;
-+	/* wlan packet content is placed here: */
-+	u8	data[WLAN_A4FR_MAXLEN_WEP_FCS];
-+} ACX_PACKED usb_txbuffer_t;
-+
-+/* USB returns either rx packets (see rxbuffer) or
-+** these "tx status" structs: */
-+typedef struct usb_txstatus {
-+	u16	mac_cnt_rcvd;		/* only 12 bits are len! (0xfff) */
-+	u8	queue_index;
-+	u8	mac_status;		/* seen 0x20 on tx failure */
-+	u32	hostdata;
-+	u8	rate;
-+	u8	ack_failures;
-+	u8	rts_failures;
-+	u8	rts_ok;
-+} ACX_PACKED usb_txstatus_t;
-+
-+typedef struct usb_tx {
-+	unsigned	busy:1;
-+	struct urb	*urb;
-+	acx_device_t	*adev;
-+	/* actual USB bulk output data block is here: */
-+	usb_txbuffer_t	bulkout;
-+} usb_tx_t;
-+
-+struct usb_rx_plain {
-+	unsigned	busy:1;
-+	struct urb	*urb;
-+	acx_device_t	*adev;
-+	rxbuffer_t	bulkin;
-+};
-+
-+typedef struct usb_rx {
-+	unsigned	busy:1;
-+	struct urb	*urb;
-+	acx_device_t	*adev;
-+	rxbuffer_t	bulkin;
-+ /* Make entire structure 4k. Report if it breaks something. */
-+	u8 padding[4*1024 - sizeof(struct usb_rx_plain)];
-+} usb_rx_t;
-+#endif /* ACX_USB */
-+
-+
-+/* Config Option structs */
-+
-+typedef struct co_antennas {
-+	u8	type;
-+	u8	len;
-+	u8	list[2];
-+} ACX_PACKED co_antennas_t;
-+
-+typedef struct co_powerlevels {
-+	u8	type;
-+	u8	len;
-+	u16	list[8];
-+} ACX_PACKED co_powerlevels_t;
-+
-+typedef struct co_datarates {
-+	u8	type;
-+	u8	len;
-+	u8	list[8];
-+} ACX_PACKED co_datarates_t;
-+
-+typedef struct co_domains {
-+	u8	type;
-+	u8	len;
-+	u8	list[6];
-+} ACX_PACKED co_domains_t;
-+
-+typedef struct co_product_id {
-+	u8	type;
-+	u8	len;
-+	u8	list[128];
-+} ACX_PACKED co_product_id_t;
-+
-+typedef struct co_manuf_id {
-+	u8	type;
-+	u8	len;
-+	u8	list[128];
-+} ACX_PACKED co_manuf_t;
-+
-+typedef struct co_fixed {
-+	char	NVSv[8];
-+/*	u16	NVS_vendor_offs;	ACX111-only */
-+/*	u16	unknown;		ACX111-only */
-+	u8	MAC[6];	/* ACX100-only */
-+	u16	probe_delay;	/* ACX100-only */
-+	u32	eof_memory;
-+	u8	dot11CCAModes;
-+	u8	dot11Diversity;
-+	u8	dot11ShortPreambleOption;
-+	u8	dot11PBCCOption;
-+	u8	dot11ChannelAgility;
-+	u8	dot11PhyType; /* FIXME: does 802.11 call it "dot11PHYType"? */
-+	u8	dot11TempType;
-+	u8	table_count;
-+} ACX_PACKED co_fixed_t;
-+
-+typedef struct acx111_ie_configoption {
-+	u16			type;
-+	u16			len;
-+/* Do not access below members directly, they are in fact variable length */
-+	co_fixed_t		fixed;
-+	co_antennas_t		antennas;
-+	co_powerlevels_t	power_levels;
-+	co_datarates_t		data_rates;
-+	co_domains_t		domains;
-+	co_product_id_t		product_id;
-+	co_manuf_t		manufacturer;
-+	u8			_padding[4];
-+} ACX_PACKED acx111_ie_configoption_t;
-+
-+
-+/***********************************************************************
-+** Main acx per-device data structure
-+*/
-+#define ACX_STATE_FW_LOADED	0x01
-+#define ACX_STATE_IFACE_UP	0x02
-+
-+/* MAC mode (BSS type) defines
-+ * Note that they shouldn't be redefined, since they are also used
-+ * during communication with firmware */
-+#define ACX_MODE_0_ADHOC	0
-+#define ACX_MODE_1_UNUSED	1
-+#define ACX_MODE_2_STA		2
-+#define ACX_MODE_3_AP		3
-+/* These are our own inventions. Sending these to firmware
-+** makes it stop emitting beacons, which is exactly what we want
-+** for these modes */
-+#define ACX_MODE_MONITOR	0xfe
-+#define ACX_MODE_OFF		0xff
-+/* 'Submode': identifies exact status of ADHOC/STA host */
-+#define ACX_STATUS_0_STOPPED		0
-+#define ACX_STATUS_1_SCANNING		1
-+#define ACX_STATUS_2_WAIT_AUTH		2
-+#define ACX_STATUS_3_AUTHENTICATED	3
-+#define ACX_STATUS_4_ASSOCIATED		4
-+
-+/* FIXME: this should be named something like struct acx_priv (typedef'd to
-+ * acx_priv_t) */
-+
-+/* non-firmware struct, no packing necessary */
-+struct acx_device {
-+	/* most frequent accesses first (dereferencing and cache line!) */
-+
-+	/*** Locking ***/
-+	/* FIXME: try to convert semaphore to more efficient mutex according
-+	   to Ingo Molnar's docs (but not before driver is in mainline or
-+		 pre-mutex Linux 2.6.10 is very outdated). */
-+	struct semaphore	sem;
-+	spinlock_t		lock;
-+#if defined(PARANOID_LOCKING) /* Lock debugging */
-+	const char		*last_sem;
-+	const char		*last_lock;
-+	unsigned long		sem_time;
-+	unsigned long		lock_time;
-+#endif
-+#ifdef ACX_MEM
-+        spinlock_t              txbuf_lock;
-+#endif
-+
-+	/*** Linux network device ***/
-+	struct net_device	*ndev;		/* pointer to linux netdevice */
-+
-+	/*** Device statistics ***/
-+	struct net_device_stats	stats;		/* net device statistics */
-+#ifdef WIRELESS_EXT
-+	struct iw_statistics	wstats;		/* wireless statistics */
-+#endif
-+	/*** Power managment ***/
-+	struct pm_dev		*pm;		/* PM crap */
-+
-+	/*** Management timer ***/
-+	struct timer_list	mgmt_timer;
-+
-+	/*** Hardware identification ***/
-+	const char		*chip_name;
-+	u8			dev_type;
-+	u8			chip_type;
-+	u8			form_factor;
-+	u8			radio_type;
-+	u8			eeprom_version;
-+
-+	/*** Config retrieved from EEPROM ***/
-+	char			cfgopt_NVSv[8];
-+	u16			cfgopt_NVS_vendor_offs;
-+	u8			cfgopt_MAC[6];
-+	u16			cfgopt_probe_delay;
-+	u32			cfgopt_eof_memory;
-+	u8			cfgopt_dot11CCAModes;
-+	u8			cfgopt_dot11Diversity;
-+	u8			cfgopt_dot11ShortPreambleOption;
-+	u8			cfgopt_dot11PBCCOption;
-+	u8			cfgopt_dot11ChannelAgility;
-+	u8			cfgopt_dot11PhyType;
-+	u8			cfgopt_dot11TempType;
-+	co_antennas_t		cfgopt_antennas;
-+	co_powerlevels_t	cfgopt_power_levels;
-+	co_datarates_t		cfgopt_data_rates;
-+	co_domains_t		cfgopt_domains;
-+	co_product_id_t		cfgopt_product_id;
-+	co_manuf_t		cfgopt_manufacturer;
-+
-+	/*** Firmware identification ***/
-+	char		firmware_version[FW_ID_SIZE+1];
-+	u32		firmware_numver;
-+	u32		firmware_id;
-+	const u16	*ie_len;
-+	const u16	*ie_len_dot11;
-+
-+	/*** Device state ***/
-+	u16		dev_state_mask;
-+	u8		led_power;		/* power LED status */
-+	u32		get_mask;		/* mask of settings to fetch from the card */
-+	u32		set_mask;		/* mask of settings to write to the card */
-+
-+	/* Barely used in USB case */
-+	u16		irq_status;
-+
-+	u8		after_interrupt_jobs;	/* mini job list for doing actions after an interrupt occurred */
-+	WORK_STRUCT	after_interrupt_task;	/* our task for after interrupt actions */
-+
-+	/*** scanning ***/
-+	u16		scan_count;		/* number of times to do channel scan */
-+	u8		scan_mode;		/* 0 == active, 1 == passive, 2 == background */
-+	u8		scan_rate;
-+	u16		scan_duration;
-+	u16		scan_probe_delay;
-+#if WIRELESS_EXT > 15
-+	struct iw_spy_data	spy_data;	/* FIXME: needs to be implemented! */
-+#endif
-+
-+	/*** Wireless network settings ***/
-+	/* copy of the device address (ifconfig hw ether) that we actually use
-+	** for 802.11; copied over from the network device's MAC address
-+	** (ifconfig) when it makes sense only */
-+	u8		dev_addr[MAX_ADDR_LEN];
-+	u8		bssid[ETH_ALEN];	/* the BSSID after having joined */
-+	u8		ap[ETH_ALEN];		/* The AP we want, FF:FF:FF:FF:FF:FF is any */
-+	u16		aid;			/* The Association ID sent from the AP / last used AID if we're an AP */
-+	u16		mode;			/* mode from iwconfig */
-+	int		monitor_type;		/* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */
-+	u16		status;			/* 802.11 association status */
-+	u8		essid_active;		/* specific ESSID active, or select any? */
-+	u8		essid_len;		/* to avoid dozens of strlen() */
-+	/* INCLUDES \0 termination for easy printf - but many places
-+	** simply want the string data memcpy'd plus a length indicator!
-+	** Keep that in mind... */
-+	char		essid[IW_ESSID_MAX_SIZE+1];
-+	/* essid we are going to use for association, in case of "essid 'any'"
-+	** and in case of hidden ESSID (use configured ESSID then) */
-+	char		essid_for_assoc[IW_ESSID_MAX_SIZE+1];
-+	char		nick[IW_ESSID_MAX_SIZE+1]; /* see essid! */
-+	u8		channel;
-+	u8		reg_dom_id;		/* reg domain setting */
-+	u16		reg_dom_chanmask;
-+	u16		auth_or_assoc_retries;
-+	u16		scan_retries;
-+	unsigned long	scan_start;		/* YES, jiffies is defined as "unsigned long" */
-+
-+	/* stations known to us (if we're an ap) */
-+	client_t	sta_list[32];		/* tab is larger than list, so that */
-+	client_t	*sta_hash_tab[64];	/* hash collisions are not likely */
-+	client_t	*ap_client;		/* this one is our AP (STA mode only) */
-+
-+	int		dup_count;
-+	int		nondup_count;
-+	unsigned long	dup_msg_expiry;
-+	u16		last_seq_ctrl;		/* duplicate packet detection */
-+
-+	/* 802.11 power save mode */
-+	u8		ps_wakeup_cfg;
-+	u8		ps_listen_interval;
-+	u8		ps_options;
-+	u8		ps_hangover_period;
-+	u32		ps_enhanced_transition_time;
-+	u32		ps_beacon_rx_time;
-+
-+	/*** PHY settings ***/
-+	u8		fallback_threshold;
-+	u8		stepup_threshold;
-+	u16		rate_basic;
-+	u16		rate_oper;
-+	u16		rate_bcast;
-+	u16		rate_bcast100;
-+	u8		rate_auto;		/* false if "iwconfig rate N" (WITHOUT 'auto'!) */
-+	u8		preamble_mode;		/* 0 == Long Preamble, 1 == Short, 2 == Auto */
-+	u8		preamble_cur;
-+
-+	u8		tx_disabled;
-+	u8		tx_level_dbm;
-+	/* u8		tx_level_val; */
-+	/* u8		tx_level_auto;		whether to do automatic power adjustment */
-+
-+	unsigned long	recalib_time_last_success;
-+	unsigned long	recalib_time_last_attempt;
-+	int		recalib_failure_count;
-+	int		recalib_msg_ratelimit;
-+	int		retry_errors_msg_ratelimit;
-+
-+	unsigned long	brange_time_last_state_change;	/* time the power LED was last changed */
-+	u8		brange_last_state;	/* last state of the LED */
-+	u8		brange_max_quality;	/* maximum quality that equates to full speed */
-+
-+	u8		sensitivity;
-+	u8		antenna;		/* antenna settings */
-+	u8		ed_threshold;		/* energy detect threshold */
-+	u8		cca;			/* clear channel assessment */
-+
-+	u16		rts_threshold;
-+	u16		frag_threshold;
-+	u32		short_retry;
-+	u32		long_retry;
-+	u16		msdu_lifetime;
-+	u16		listen_interval;	/* given in units of beacon interval */
-+	u32		beacon_interval;
-+
-+	u16		capabilities;
-+	u8		rate_supported_len;
-+	u8		rate_supported[13];
-+
-+	/*** Encryption settings (WEP) ***/
-+	u32		auth_alg;		/* used in transmit_authen1 */
-+	u8		wep_enabled;
-+	u8		wep_restricted;
-+	u8		wep_current_index;
-+	wep_key_t	wep_keys[DOT11_MAX_DEFAULT_WEP_KEYS];	/* the default WEP keys */
-+	key_struct_t	wep_key_struct[10];
-+
-+	/*** Unknown ***/
-+	u8		dtim_interval;
-+
-+#ifdef ACX_MEM
-+        u32 acx_txbuf_start;
-+        int acx_txbuf_numblocks;
-+        u32 acx_txbuf_free;                    /* addr of head of free list          */
-+        int acx_txbuf_blocks_free;             /* how many are still open            */
-+        queueindicator_t *acx_queue_indicator;
-+#endif
-+
-+	/*** Card Rx/Tx management ***/
-+	u16		rx_config_1;
-+	u16		rx_config_2;
-+	u16		memblocksize;
-+	unsigned int	tx_free;
-+	unsigned int	tx_head; /* keep as close as possible to Tx stuff below (cache line) */
-+	u16		phy_header_len;
-+
-+/*************************************************************************
-+ *** PCI/USB/... must be last or else hw agnostic code breaks horribly ***
-+ *************************************************************************/
-+
-+	/* hack to let common code compile. FIXME */
-+	dma_addr_t	rxhostdesc_startphy;
-+
-+	/*** PCI stuff ***/
-+#if defined(ACX_PCI) || defined(ACX_MEM)
-+	/* pointers to tx buffers, tx host descriptors (in host memory)
-+	** and tx descs in device memory */
-+	unsigned int	tx_tail;
-+	u8		*txbuf_start;
-+	txhostdesc_t	*txhostdesc_start;
-+	txdesc_t	*txdesc_start;	/* points to PCI-mapped memory */
-+	dma_addr_t	txbuf_startphy;
-+	dma_addr_t	txhostdesc_startphy;
-+	/* sizes of above host memory areas */
-+	unsigned int	txbuf_area_size;
-+	unsigned int	txhostdesc_area_size;
-+
-+	unsigned int	txdesc_size;	/* size of txdesc; ACX111 = ACX100 + 4 */
-+	client_t	*txc[TX_CNT];
-+	u16		txr[TX_CNT];
-+
-+	/* same for rx */
-+	unsigned int	rx_tail;
-+	rxbuffer_t	*rxbuf_start;
-+	rxhostdesc_t	*rxhostdesc_start;
-+	rxdesc_t	*rxdesc_start;
-+	/* physical addresses of above host memory areas */
-+	dma_addr_t	rxbuf_startphy;
-+	/* dma_addr_t	rxhostdesc_startphy; */
-+	unsigned int	rxbuf_area_size;
-+	unsigned int	rxhostdesc_area_size;
-+
-+	u8		need_radio_fw;
-+	u8		irqs_active;	/* whether irq sending is activated */
-+
-+	const u16	*io;		/* points to ACX100 or ACX111 PCI I/O register address set */
-+
-+#ifdef ACX_PCI
-+	struct pci_dev	*pdev;
-+#endif
-+#ifdef ACX_MEM
-+	struct device	*dev;
-+#endif
-+
-+#ifdef ACX_PCI
-+	unsigned long	membase;
-+#endif
-+#ifdef ACX_MEM
-+	volatile u32	*membase;
-+#endif
-+	unsigned long	membase2;
-+#ifdef ACX_PCI
-+	void __iomem	*iobase;
-+#endif
-+#ifdef ACX_MEM
-+	volatile u32	*iobase;
-+#endif
-+	void __iomem	*iobase2;
-+	/* command interface */
-+	u8 __iomem	*cmd_area;
-+	u8 __iomem	*info_area;
-+
-+	u16		irq_mask;		/* interrupt types to mask out (not wanted) with many IRQs activated */
-+	u16		irq_mask_off;		/* interrupt types to mask out (not wanted) with IRQs off */
-+	unsigned int	irq_loops_this_jiffy;
-+	unsigned long	irq_last_jiffies;
-+#endif
-+
-+	/*** USB stuff ***/
-+#ifdef ACX_USB
-+	struct usb_device	*usbdev;
-+
-+	rxbuffer_t	rxtruncbuf;
-+
-+	usb_tx_t	*usb_tx;
-+	usb_rx_t	*usb_rx;
-+
-+	int		bulkinep;	/* bulk-in endpoint */
-+	int		bulkoutep;	/* bulk-out endpoint */
-+	int		rxtruncsize;
-+#endif
-+
-+};
-+
-+static inline acx_device_t*
-+ndev2adev(struct net_device *ndev)
-+{
-+	return netdev_priv(ndev);
-+}
-+
-+
-+/* For use with ACX1xx_IE_RXCONFIG */
-+/*  bit     description
-+ *    13   include additional header (length etc.) *required*
-+ *		struct is defined in 'struct rxbuffer'
-+ *		is this bit acx100 only? does acx111 always put the header,
-+ *		and bit setting is irrelevant? --vda
-+ *    10   receive frames only with SSID used in last join cmd
-+ *     9   discard broadcast
-+ *     8   receive packets for multicast address 1
-+ *     7   receive packets for multicast address 0
-+ *     6   discard all multicast packets
-+ *     5   discard frames from foreign BSSID
-+ *     4   discard frames with foreign destination MAC address
-+ *     3   promiscuous mode (receive ALL frames, disable filter)
-+ *     2   include FCS
-+ *     1   include phy header
-+ *     0   ???
-+ */
-+#define RX_CFG1_INCLUDE_RXBUF_HDR	0x2000 /* ACX100 only */
-+#define RX_CFG1_FILTER_SSID		0x0400
-+#define RX_CFG1_FILTER_BCAST		0x0200
-+#define RX_CFG1_RCV_MC_ADDR1		0x0100
-+#define RX_CFG1_RCV_MC_ADDR0		0x0080
-+#define RX_CFG1_FILTER_ALL_MULTI	0x0040
-+#define RX_CFG1_FILTER_BSSID		0x0020
-+#define RX_CFG1_FILTER_MAC		0x0010
-+#define RX_CFG1_RCV_PROMISCUOUS		0x0008
-+#define RX_CFG1_INCLUDE_FCS		0x0004
-+#define RX_CFG1_INCLUDE_PHY_HDR		(WANT_PHY_HDR ? 0x0002 : 0)
-+/*  bit     description
-+ *    11   receive association requests etc.
-+ *    10   receive authentication frames
-+ *     9   receive beacon frames
-+ *     8   receive contention free packets
-+ *     7   receive control frames
-+ *     6   receive data frames
-+ *     5   receive broken frames
-+ *     4   receive management frames
-+ *     3   receive probe requests
-+ *     2   receive probe responses
-+ *     1   receive RTS/CTS/ACK frames
-+ *     0   receive other
-+ */
-+#define RX_CFG2_RCV_ASSOC_REQ		0x0800
-+#define RX_CFG2_RCV_AUTH_FRAMES		0x0400
-+#define RX_CFG2_RCV_BEACON_FRAMES	0x0200
-+#define RX_CFG2_RCV_CONTENTION_FREE	0x0100
-+#define RX_CFG2_RCV_CTRL_FRAMES		0x0080
-+#define RX_CFG2_RCV_DATA_FRAMES		0x0040
-+#define RX_CFG2_RCV_BROKEN_FRAMES	0x0020
-+#define RX_CFG2_RCV_MGMT_FRAMES		0x0010
-+#define RX_CFG2_RCV_PROBE_REQ		0x0008
-+#define RX_CFG2_RCV_PROBE_RESP		0x0004
-+#define RX_CFG2_RCV_ACK_FRAMES		0x0002
-+#define RX_CFG2_RCV_OTHER		0x0001
-+
-+/* For use with ACX1xx_IE_FEATURE_CONFIG */
-+#define FEATURE1_80MHZ_CLOCK	0x00000040L
-+#define FEATURE1_4X		0x00000020L
-+#define FEATURE1_LOW_RX		0x00000008L
-+#define FEATURE1_EXTRA_LOW_RX	0x00000001L
-+
-+#define FEATURE2_SNIFFER	0x00000080L
-+#define FEATURE2_NO_TXCRYPT	0x00000001L
-+
-+/*-- get and set mask values --*/
-+#define GETSET_LED_POWER	0x00000001L
-+#define GETSET_STATION_ID	0x00000002L
-+#define SET_TEMPLATES		0x00000004L
-+#define SET_STA_LIST		0x00000008L
-+#define GETSET_TX		0x00000010L
-+#define GETSET_RX		0x00000020L
-+#define SET_RXCONFIG		0x00000040L
-+#define GETSET_ANTENNA		0x00000080L
-+#define GETSET_SENSITIVITY	0x00000100L
-+#define GETSET_TXPOWER		0x00000200L
-+#define GETSET_ED_THRESH	0x00000400L
-+#define GETSET_CCA		0x00000800L
-+#define GETSET_POWER_80211	0x00001000L
-+#define GETSET_RETRY		0x00002000L
-+#define GETSET_REG_DOMAIN	0x00004000L
-+#define GETSET_CHANNEL		0x00008000L
-+/* Used when ESSID changes etc and we need to scan for AP anew */
-+#define GETSET_RESCAN		0x00010000L
-+#define GETSET_MODE		0x00020000L
-+#define GETSET_WEP		0x00040000L
-+#define SET_WEP_OPTIONS		0x00080000L
-+#define SET_MSDU_LIFETIME	0x00100000L
-+#define SET_RATE_FALLBACK	0x00200000L
-+
-+/* keep in sync with the above */
-+#define GETSET_ALL	(0 \
-+/* GETSET_LED_POWER */	| 0x00000001L \
-+/* GETSET_STATION_ID */	| 0x00000002L \
-+/* SET_TEMPLATES */	| 0x00000004L \
-+/* SET_STA_LIST */	| 0x00000008L \
-+/* GETSET_TX */		| 0x00000010L \
-+/* GETSET_RX */		| 0x00000020L \
-+/* SET_RXCONFIG */	| 0x00000040L \
-+/* GETSET_ANTENNA */	| 0x00000080L \
-+/* GETSET_SENSITIVITY */| 0x00000100L \
-+/* GETSET_TXPOWER */	| 0x00000200L \
-+/* GETSET_ED_THRESH */	| 0x00000400L \
-+/* GETSET_CCA */	| 0x00000800L \
-+/* GETSET_POWER_80211 */| 0x00001000L \
-+/* GETSET_RETRY */	| 0x00002000L \
-+/* GETSET_REG_DOMAIN */	| 0x00004000L \
-+/* GETSET_CHANNEL */	| 0x00008000L \
-+/* GETSET_RESCAN */	| 0x00010000L \
-+/* GETSET_MODE */	| 0x00020000L \
-+/* GETSET_WEP */	| 0x00040000L \
-+/* SET_WEP_OPTIONS */	| 0x00080000L \
-+/* SET_MSDU_LIFETIME */	| 0x00100000L \
-+/* SET_RATE_FALLBACK */	| 0x00200000L \
-+			)
-+
-+
-+/***********************************************************************
-+** Firmware loading
-+*/
-+#include <linux/firmware.h>	/* request_firmware() */
-+#include <linux/pci.h>		/* struct pci_device */
-+
-+
-+/***********************************************************************
-+*/
-+typedef struct acx100_ie_memblocksize {
-+	u16	type;
-+	u16	len;
-+	u16	size;
-+} ACX_PACKED acx100_ie_memblocksize_t;
-+
-+typedef struct acx100_ie_queueconfig {
-+	u16	type;
-+	u16	len;
-+	u32	AreaSize;
-+	u32	RxQueueStart;
-+	u8	QueueOptions;
-+	u8	NumTxQueues;
-+	u8	NumRxDesc;	 /* for USB only */
-+	u8	pad1;
-+	u32	QueueEnd;
-+	u32	HostQueueEnd; /* QueueEnd2 */
-+	u32	TxQueueStart;
-+	u8	TxQueuePri;
-+	u8	NumTxDesc;
-+	u16	pad2;
-+} ACX_PACKED acx100_ie_queueconfig_t;
-+
-+typedef struct acx111_ie_queueconfig {
-+	u16	type;
-+	u16	len;
-+	u32	tx_memory_block_address;
-+	u32	rx_memory_block_address;
-+	u32	rx1_queue_address;
-+	u32	reserved1;
-+	u32	tx1_queue_address;
-+	u8	tx1_attributes;
-+	u16	reserved2;
-+	u8	reserved3;
-+} ACX_PACKED acx111_ie_queueconfig_t;
-+
-+typedef struct acx100_ie_memconfigoption {
-+	u16	type;
-+	u16	len;
-+	u32	DMA_config;
-+	acx_ptr	pRxHostDesc;
-+	u32	rx_mem;
-+	u32	tx_mem;
-+	u16	RxBlockNum;
-+	u16	TxBlockNum;
-+} ACX_PACKED acx100_ie_memconfigoption_t;
-+
-+typedef struct acx111_ie_memoryconfig {
-+	u16	type;
-+	u16	len;
-+	u16	no_of_stations;
-+	u16	memory_block_size;
-+	u8	tx_rx_memory_block_allocation;
-+	u8	count_rx_queues;
-+	u8	count_tx_queues;
-+	u8	options;
-+	u8	fragmentation;
-+	u16	reserved1;
-+	u8	reserved2;
-+
-+	/* start of rx1 block */
-+	u8	rx_queue1_count_descs;
-+	u8	rx_queue1_reserved1;
-+	u8	rx_queue1_type; /* must be set to 7 */
-+	u8	rx_queue1_prio; /* must be set to 0 */
-+	acx_ptr	rx_queue1_host_rx_start;
-+	/* end of rx1 block */
-+
-+	/* start of tx1 block */
-+	u8	tx_queue1_count_descs;
-+	u8	tx_queue1_reserved1;
-+	u8	tx_queue1_reserved2;
-+	u8	tx_queue1_attributes;
-+	/* end of tx1 block */
-+} ACX_PACKED acx111_ie_memoryconfig_t;
-+
-+typedef struct acx_ie_memmap {
-+	u16	type;
-+	u16	len;
-+	u32	CodeStart;
-+	u32	CodeEnd;
-+	u32	WEPCacheStart;
-+	u32	WEPCacheEnd;
-+	u32	PacketTemplateStart;
-+	u32	PacketTemplateEnd;
-+	u32	QueueStart;
-+	u32	QueueEnd;
-+	u32	PoolStart;
-+	u32	PoolEnd;
-+} ACX_PACKED acx_ie_memmap_t;
-+
-+typedef struct acx111_ie_feature_config {
-+	u16	type;
-+	u16	len;
-+	u32	feature_options;
-+	u32	data_flow_options;
-+} ACX_PACKED acx111_ie_feature_config_t;
-+
-+typedef struct acx111_ie_tx_level {
-+	u16	type;
-+	u16	len;
-+	u8	level;
-+} ACX_PACKED acx111_ie_tx_level_t;
-+
-+#define PS_CFG_ENABLE		0x80
-+#define PS_CFG_PENDING		0x40 /* status flag when entering PS */
-+#define PS_CFG_WAKEUP_MODE_MASK	0x07
-+#define PS_CFG_WAKEUP_BY_HOST	0x03
-+#define PS_CFG_WAKEUP_EACH_ITVL	0x02
-+#define PS_CFG_WAKEUP_ON_DTIM	0x01
-+#define PS_CFG_WAKEUP_ALL_BEAC	0x00
-+
-+/* Enhanced PS mode: sleep until Rx Beacon w/ the STA's AID bit set
-+** in the TIM; newer firmwares only(?) */
-+#define PS_OPT_ENA_ENHANCED_PS	0x04
-+#define PS_OPT_TX_PSPOLL	0x02 /* send PSPoll frame to fetch waiting frames from AP (on frame with matching AID) */
-+#define PS_OPT_STILL_RCV_BCASTS	0x01
-+
-+typedef struct acx100_ie_powersave {
-+	u16	type;
-+	u16	len;
-+	u8	wakeup_cfg;
-+	u8	listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */
-+	u8	options;
-+	u8	hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */
-+	u16	enhanced_ps_transition_time; /* rem. wake time for Enh. PS */
-+} ACX_PACKED acx100_ie_powersave_t;
-+
-+typedef struct acx111_ie_powersave {
-+	u16	type;
-+	u16	len;
-+	u8	wakeup_cfg;
-+	u8	listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */
-+	u8	options;
-+	u8	hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */
-+	u32	beacon_rx_time;
-+	u32	enhanced_ps_transition_time; /* rem. wake time for Enh. PS */
-+} ACX_PACKED acx111_ie_powersave_t;
-+
-+
-+/***********************************************************************
-+** Commands and template structures
-+*/
-+
-+/*
-+** SCAN command structure
-+**
-+** even though acx100 scan rates match RATE100 constants,
-+** acx111 ones do not match! Therefore we do not use RATE100 #defines */
-+#define ACX_SCAN_RATE_1		10
-+#define ACX_SCAN_RATE_2		20
-+#define ACX_SCAN_RATE_5		55
-+#define ACX_SCAN_RATE_11	110
-+#define ACX_SCAN_RATE_22	220
-+#define ACX_SCAN_RATE_PBCC	0x80	/* OR with this if needed */
-+#define ACX_SCAN_OPT_ACTIVE	0x00	/* a bit mask */
-+#define ACX_SCAN_OPT_PASSIVE	0x01
-+/* Background scan: we go into Power Save mode (by transmitting
-+** NULL data frame to AP with the power mgmt bit set), do the scan,
-+** and then exit Power Save mode. A plus is that AP buffers frames
-+** for us while we do background scan. Thus we avoid frame losses.
-+** Background scan can be active or passive, just like normal one */
-+#define ACX_SCAN_OPT_BACKGROUND	0x02
-+typedef struct acx100_scan {
-+	u16	count;	/* number of scans to do, 0xffff == continuous */
-+	u16	start_chan;
-+	u16	flags;	/* channel list mask; 0x8000 == all channels? */
-+	u8	max_rate;	/* max. probe rate */
-+	u8	options;	/* bit mask, see defines above */
-+	u16	chan_duration;
-+	u16	max_probe_delay;
-+} ACX_PACKED acx100_scan_t;			/* length 0xc */
-+
-+#define ACX111_SCAN_RATE_6	0x0B
-+#define ACX111_SCAN_RATE_9	0x0F
-+#define ACX111_SCAN_RATE_12	0x0A
-+#define ACX111_SCAN_RATE_18	0x0E
-+#define ACX111_SCAN_RATE_24	0x09
-+#define ACX111_SCAN_RATE_36	0x0D
-+#define ACX111_SCAN_RATE_48	0x08
-+#define ACX111_SCAN_RATE_54	0x0C
-+#define ACX111_SCAN_OPT_5GHZ    0x04	/* else 2.4GHZ */
-+#define ACX111_SCAN_MOD_SHORTPRE 0x01	/* you can combine SHORTPRE and PBCC */
-+#define ACX111_SCAN_MOD_PBCC	0x80
-+#define ACX111_SCAN_MOD_OFDM	0x40
-+typedef struct acx111_scan {
-+	u16	count;		/* number of scans to do */
-+	u8	channel_list_select; /* 0: scan all channels, 1: from chan_list only */
-+	u16	reserved1;
-+	u8	reserved2;
-+	u8	rate;		/* rate for probe requests (if active scan) */
-+	u8	options;		/* bit mask, see defines above */
-+	u16	chan_duration;	/* min time to wait for reply on one channel (in TU) */
-+						/* (active scan only) (802.11 section 11.1.3.2.2) */
-+	u16	max_probe_delay;	/* max time to wait for reply on one channel (active scan) */
-+						/* time to listen on a channel (passive scan) */
-+	u8	modulation;
-+	u8	channel_list[26];	/* bits 7:0 first byte: channels 8:1 */
-+						/* bits 7:0 second byte: channels 16:9 */
-+						/* 26 bytes is enough to cover 802.11a */
-+} ACX_PACKED acx111_scan_t;
-+
-+
-+/*
-+** Radio calibration command structure
-+*/
-+typedef struct acx111_cmd_radiocalib {
-+/* 0x80000000 == automatic calibration by firmware, according to interval;
-+ * bits 0..3: select calibration methods to go through:
-+ * calib based on DC, AfeDC, Tx mismatch, Tx equilization */
-+	u32	methods;
-+	u32	interval;
-+} ACX_PACKED acx111_cmd_radiocalib_t;
-+
-+
-+/*
-+** Packet template structures
-+**
-+** Packet templates store contents of Beacon, Probe response, Probe request,
-+** Null data frame, and TIM data frame. Firmware automatically transmits
-+** contents of template at appropriate time:
-+** - Beacon: when configured as AP or Ad-hoc
-+** - Probe response: when configured as AP or Ad-hoc, whenever
-+**   a Probe request frame is received
-+** - Probe request: when host issues SCAN command (active)
-+** - Null data frame: when entering 802.11 power save mode
-+** - TIM data: at the end of Beacon frames (if no TIM template
-+**   is configured, then transmits default TIM)
-+** NB:
-+** - size field must be set to size of actual template
-+**   (NOT sizeof(struct) - templates are variable in length),
-+**   size field is not itself counted.
-+** - members flagged with an asterisk must be initialized with host,
-+**   rest must be zero filled.
-+** - variable length fields shown only in comments */
-+typedef struct acx_template_tim {
-+	u16	size;
-+	u8	tim_eid;	/* 00 1 TIM IE ID * */
-+	u8	len;		/* 01 1 Length * */
-+	u8	dtim_cnt;	/* 02 1 DTIM Count */
-+	u8	dtim_period;	/* 03 1 DTIM Period */
-+	u8	bitmap_ctrl;	/* 04 1 Bitmap Control * (except bit0) */
-+					/* 05 n Partial Virtual Bitmap * */
-+	u8	variable[0x100 - 1-1-1-1-1];
-+} ACX_PACKED acx_template_tim_t;
-+
-+typedef struct acx_template_probereq {
-+	u16	size;
-+	u16	fc;		/* 00 2 fc * */
-+	u16	dur;		/* 02 2 Duration */
-+	u8	da[6];	/* 04 6 Destination Address * */
-+	u8	sa[6];	/* 0A 6 Source Address * */
-+	u8	bssid[6];	/* 10 6 BSSID * */
-+	u16	seq;		/* 16 2 Sequence Control */
-+					/* 18 n SSID * */
-+					/* nn n Supported Rates * */
-+	u8	variable[0x44 - 2-2-6-6-6-2];
-+} ACX_PACKED acx_template_probereq_t;
-+
-+typedef struct acx_template_proberesp {
-+	u16	size;
-+	u16	fc;		/* 00 2 fc * (bits [15:12] and [10:8] per 802.11 section 7.1.3.1) */
-+	u16	dur;		/* 02 2 Duration */
-+	u8	da[6];	/* 04 6 Destination Address */
-+	u8	sa[6];	/* 0A 6 Source Address */
-+	u8	bssid[6];	/* 10 6 BSSID */
-+	u16	seq;		/* 16 2 Sequence Control */
-+	u8	timestamp[8];/* 18 8 Timestamp */
-+	u16	beacon_interval; /* 20 2 Beacon Interval * */
-+	u16	cap;		/* 22 2 Capability Information * */
-+					/* 24 n SSID * */
-+					/* nn n Supported Rates * */
-+					/* nn 1 DS Parameter Set * */
-+	u8	variable[0x54 - 2-2-6-6-6-2-8-2-2];
-+} ACX_PACKED acx_template_proberesp_t;
-+#define acx_template_beacon_t acx_template_proberesp_t
-+#define acx_template_beacon acx_template_proberesp
-+
-+typedef struct acx_template_nullframe {
-+	u16	size;
-+	struct wlan_hdr_a3 hdr;
-+} ACX_PACKED acx_template_nullframe_t;
-+
-+
-+/*
-+** JOIN command structure
-+**
-+** as opposed to acx100, acx111 dtim interval is AFTER rates_basic111.
-+** NOTE: took me about an hour to get !@#$%^& packing right --> struct packing is eeeeevil... */
-+typedef struct acx_joinbss {
-+	u8	bssid[ETH_ALEN];
-+	u16	beacon_interval;
-+	union {
-+		struct {
-+			u8	dtim_interval;
-+			u8	rates_basic;
-+			u8	rates_supported;
-+		  /*
-+		   * ARM compiler doesn't pack correctly unless unions
-+		   * inside structures are multiples of 4 bytes.  Ugh.
-+		   */
-+		        u8	genfrm_txrate;	/* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */
-+		} ACX_PACKED acx100;
-+		struct {
-+			u16	rates_basic;
-+			u8	dtim_interval;
-+		        u8	genfrm_txrate;	/* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */
-+		} ACX_PACKED acx111;
-+	        /*
-+		 * ARM compiler doesn't pack correctly unles unions are aligned on
-+		 * 4 byte boundaries and are multiples of 4 bytes.
-+		 */
-+	        struct {
-+		      u8 d1;
-+		      u8 d2;
-+		      u8 d3;
-+		      u8 genfrm_txrate;
-+	        } ACX_PACKED txrate;
-+	} ACX_PACKED u;
-+	u8	genfrm_mod_pre;	/* generated frame modulation/preamble:
-+						** bit7: PBCC, bit6: OFDM (else CCK/DQPSK/DBPSK)
-+						** bit5: short pre */
-+	u8	macmode;	/* BSS Type, must be one of ACX_MODE_xxx */
-+	u8	channel;
-+	u8	essid_len;
-+	char	essid[IW_ESSID_MAX_SIZE];
-+} ACX_PACKED acx_joinbss_t;
-+
-+#define JOINBSS_RATES_1		0x01
-+#define JOINBSS_RATES_2		0x02
-+#define JOINBSS_RATES_5		0x04
-+#define JOINBSS_RATES_11	0x08
-+#define JOINBSS_RATES_22	0x10
-+
-+/* Looks like missing bits are used to indicate 11g rates!
-+** (it follows from the fact that constants below match 1:1 to RATE111_nn)
-+** This was actually seen! Look at that Assoc Request sent by acx111,
-+** it _does_ contain 11g rates in basic set:
-+01:30:20.070772 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1
-+01:30:20.074425 Authentication (Open System)-1: Succesful
-+01:30:20.076539 Authentication (Open System)-2:
-+01:30:20.076620 Acknowledgment
-+01:30:20.088546 Assoc Request (xxx) [1.0* 2.0* 5.5* 6.0* 9.0* 11.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit]
-+01:30:20.122413 Assoc Response AID(1) :: Succesful
-+01:30:20.122679 Acknowledgment
-+01:30:20.173204 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1
-+*/
-+#define JOINBSS_RATES_BASIC111_1	0x0001
-+#define JOINBSS_RATES_BASIC111_2	0x0002
-+#define JOINBSS_RATES_BASIC111_5	0x0004
-+#define JOINBSS_RATES_BASIC111_11	0x0020
-+#define JOINBSS_RATES_BASIC111_22	0x0100
-+
-+
-+/***********************************************************************
-+*/
-+typedef struct mem_read_write {
-+	u16	addr;
-+	u16	type; /* 0x0 int. RAM / 0xffff MAC reg. / 0x81 PHY RAM / 0x82 PHY reg.; or maybe it's actually 0x30 for MAC? Better verify it by writing and reading back and checking whether the value holds! */
-+	u32	len;
-+	u32	data;
-+} ACX_PACKED mem_read_write_t;
-+
-+typedef struct firmware_image {
-+	u32	chksum;
-+	u32	size;
-+	u8	data[1]; /* the byte array of the actual firmware... */
-+} ACX_PACKED firmware_image_t;
-+
-+typedef struct acx_cmd_radioinit {
-+	u32	offset;
-+	u32	len;
-+} ACX_PACKED acx_cmd_radioinit_t;
-+
-+typedef struct acx100_ie_wep_options {
-+	u16	type;
-+	u16	len;
-+	u16	NumKeys;	/* max # of keys */
-+	u8	WEPOption;	/* 0 == decrypt default key only, 1 == override decrypt */
-+	u8	Pad;		/* used only for acx111 */
-+} ACX_PACKED acx100_ie_wep_options_t;
-+
-+typedef struct ie_dot11WEPDefaultKey {
-+	u16	type;
-+	u16	len;
-+	u8	action;
-+	u8	keySize;
-+	u8	defaultKeyNum;
-+	u8	key[29];	/* check this! was Key[19] */
-+} ACX_PACKED ie_dot11WEPDefaultKey_t;
-+
-+typedef struct acx111WEPDefaultKey {
-+	u8	MacAddr[ETH_ALEN];
-+	u16	action;	/* NOTE: this is a u16, NOT a u8!! */
-+	u16	reserved;
-+	u8	keySize;
-+	u8	type;
-+	u8	index;
-+	u8	defaultKeyNum;
-+	u8	counter[6];
-+	u8	key[32];	/* up to 32 bytes (for TKIP!) */
-+} ACX_PACKED acx111WEPDefaultKey_t;
-+
-+typedef struct ie_dot11WEPDefaultKeyID {
-+	u16	type;
-+	u16	len;
-+	u8	KeyID;
-+} ACX_PACKED ie_dot11WEPDefaultKeyID_t;
-+
-+typedef struct acx100_cmd_wep_mgmt {
-+	u8	MacAddr[ETH_ALEN];
-+	u16	Action;
-+	u16	KeySize;
-+	u8	Key[29]; /* 29*8 == 232bits == WEP256 */
-+} ACX_PACKED acx100_cmd_wep_mgmt_t;
-+
-+typedef struct acx_ie_generic {
-+	u16	type;
-+	u16	len;
-+	union {
-+		/* Association ID IE: just a 16bit value: */
-+		u16	aid;
-+		/* generic member for quick implementation of commands */
-+		u8	bytes[32];
-+	} ACX_PACKED m;
-+} ACX_PACKED acx_ie_generic_t;
-+
-+/***********************************************************************
-+*/
-+#define CHECK_SIZEOF(type,size) { \
-+	extern void BUG_bad_size_for_##type(void); \
-+	if (sizeof(type)!=(size)) BUG_bad_size_for_##type(); \
-+}
-+
-+static inline void
-+acx_struct_size_check(void)
-+{
-+	CHECK_SIZEOF(txdesc_t, 0x30);
-+	CHECK_SIZEOF(acx100_ie_memconfigoption_t, 24);
-+	CHECK_SIZEOF(acx100_ie_queueconfig_t, 0x20);
-+	CHECK_SIZEOF(acx_joinbss_t, 0x30);
-+	/* IEs need 4 bytes for (type,len) tuple */
-+	CHECK_SIZEOF(acx111_ie_configoption_t, ACX111_IE_CONFIG_OPTIONS_LEN + 4);
-+}
-+
-+
-+/***********************************************************************
-+** Global data
-+*/
-+extern const u8 acx_bitpos2ratebyte[];
-+extern const u8 acx_bitpos2rate100[];
-+
-+extern const u8 acx_reg_domain_ids[];
-+extern const char * const acx_reg_domain_strings[];
-+enum {
-+	acx_reg_domain_ids_len = 8
-+};
-+
-+extern const struct iw_handler_def acx_ioctl_handler_def;
-Index: linux-2.6.23/drivers/net/wireless/acx/common.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/common.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,7388 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/proc_fs.h>
-+#include <linux/if_arp.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/wireless.h>
-+#include <linux/pm.h>
-+#include <linux/vmalloc.h>
-+#include <net/iw_handler.h>
-+
-+#include "acx_hw.h"
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+static client_t *acx_l_sta_list_alloc(acx_device_t *adev);
-+static client_t *acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address);
-+
-+static int acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf);
-+static int acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf);
-+/* static int acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala); */
-+static int acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf);
-+static void acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req);
-+static void acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req);
-+static void acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req);
-+static void acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req);
-+static int acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req, const rxbuffer_t *rxbuf);
-+static int acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req);
-+static int acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req);
-+static int acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req);
-+static int acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req);
-+static int acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req);
-+static int acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason);
-+static int acx_l_transmit_authen1(acx_device_t *adev);
-+static int acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req, client_t *clt);
-+static int acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req);
-+static int acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req);
-+static int acx_l_transmit_assoc_req(acx_device_t *adev);
-+
-+
-+/***********************************************************************
-+*/
-+#if ACX_DEBUG
-+unsigned int acx_debug /* will add __read_mostly later */ = ACX_DEFAULT_MSG;
-+/* parameter is 'debug', corresponding var is acx_debug */
-+module_param_named(debug, acx_debug, uint, 0);
-+MODULE_PARM_DESC(debug, "Debug level mask (see L_xxx constants)");
-+#endif
-+
-+#ifdef MODULE_LICENSE
-+MODULE_LICENSE("Dual MPL/GPL");
-+#endif
-+/* USB had this: MODULE_AUTHOR("Martin Wawro <martin.wawro AT uni-dortmund.de>"); */
-+MODULE_AUTHOR("ACX100 Open Source Driver development team");
-+MODULE_DESCRIPTION("Driver for TI ACX1xx based wireless cards (CardBus/PCI/USB)");
-+
-+
-+/***********************************************************************
-+*/
-+/* Probably a number of acx's intermediate buffers for USB transfers,
-+** not to be confused with number of descriptors in tx/rx rings
-+** (which are not directly accessible to host in USB devices) */
-+#define USB_RX_CNT 10
-+#define USB_TX_CNT 10
-+
-+
-+/***********************************************************************
-+*/
-+
-+/* minutes to wait until next radio recalibration: */
-+#define RECALIB_PAUSE	5
-+
-+/* Please keep acx_reg_domain_ids_len in sync... */
-+const u8 acx_reg_domain_ids[acx_reg_domain_ids_len] =
-+	{ 0x10, 0x20, 0x30, 0x31, 0x32, 0x40, 0x41, 0x51 };
-+static const u16 reg_domain_channel_masks[acx_reg_domain_ids_len] =
-+#ifdef ACX_ALLOW_ALLCHANNELS
-+	{ 0x3fff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc };
-+#else
-+	{ 0x07ff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc };
-+#endif
-+const char * const
-+acx_reg_domain_strings[] = {
-+	/* 0 */	" 1-11 FCC (USA)",
-+	/* 1 */	" 1-11 DOC/IC (Canada)",
-+/* BTW: WLAN use in ETSI is regulated by ETSI standard EN 300 328-2 V1.1.2 */
-+	/* 2 */	" 1-13 ETSI (Europe)",
-+	/* 3 */	"10-11 Spain",
-+	/* 4 */	"10-13 France",
-+	/* 5 */	"   14 MKK (Japan)",
-+	/* 6 */	" 1-14 MKK1",
-+	/* 7 */	"  3-9 Israel (not all firmware versions)",
-+	NULL /* needs to remain as last entry */
-+};
-+
-+
-+
-+/***********************************************************************
-+** Debugging support
-+*/
-+#ifdef PARANOID_LOCKING
-+static unsigned max_lock_time;
-+static unsigned max_sem_time;
-+
-+void
-+acx_lock_unhold() { max_lock_time = 0; }
-+void
-+acx_sem_unhold() { max_sem_time = 0; }
-+
-+static inline const char*
-+sanitize_str(const char *s)
-+{
-+	const char* t = strrchr(s, '/');
-+	if (t) return t + 1;
-+	return s;
-+}
-+
-+void
-+acx_lock_debug(acx_device_t *adev, const char* where)
-+{
-+	unsigned int count = 100*1000*1000;
-+	where = sanitize_str(where);
-+	while (--count) {
-+		if (!spin_is_locked(&adev->lock)) break;
-+		cpu_relax();
-+	}
-+	if (!count) {
-+		printk(KERN_EMERG "LOCKUP: already taken at %s!\n", adev->last_lock);
-+		BUG();
-+	}
-+	adev->last_lock = where;
-+	rdtscl(adev->lock_time);
-+}
-+void
-+acx_unlock_debug(acx_device_t *adev, const char* where)
-+{
-+#ifdef SMP
-+	if (!spin_is_locked(&adev->lock)) {
-+		where = sanitize_str(where);
-+		printk(KERN_EMERG "STRAY UNLOCK at %s!\n", where);
-+		BUG();
-+	}
-+#endif
-+	if (acx_debug & L_LOCK) {
-+		unsigned long diff;
-+		rdtscl(diff);
-+		diff -= adev->lock_time;
-+		if (diff > max_lock_time) {
-+			where = sanitize_str(where);
-+			printk("max lock hold time %ld CPU ticks from %s "
-+				"to %s\n", diff, adev->last_lock, where);
-+			max_lock_time = diff;
-+		}
-+	}
-+}
-+void
-+acx_down_debug(acx_device_t *adev, const char* where)
-+{
-+	int sem_count;
-+	unsigned long timeout = jiffies + 5*HZ;
-+
-+	where = sanitize_str(where);
-+
-+	for (;;) {
-+		sem_count = atomic_read(&adev->sem.count);
-+		if (sem_count) break;
-+		if (time_after(jiffies, timeout))
-+			break;
-+		msleep(5);
-+	}
-+	if (!sem_count) {
-+		printk(KERN_EMERG "D STATE at %s! last sem at %s\n",
-+			where, adev->last_sem);
-+		dump_stack();
-+	}
-+	adev->last_sem = where;
-+	adev->sem_time = jiffies;
-+	down(&adev->sem);
-+	if (acx_debug & L_LOCK) {
-+		printk("%s: sem_down %d -> %d\n",
-+			where, sem_count, atomic_read(&adev->sem.count));
-+	}
-+}
-+void
-+acx_up_debug(acx_device_t *adev, const char* where)
-+{
-+	int sem_count = atomic_read(&adev->sem.count);
-+	if (sem_count) {
-+		where = sanitize_str(where);
-+		printk(KERN_EMERG "STRAY UP at %s! sem.count=%d\n", where, sem_count);
-+		dump_stack();
-+	}
-+	if (acx_debug & L_LOCK) {
-+		unsigned long diff = jiffies - adev->sem_time;
-+		if (diff > max_sem_time) {
-+			where = sanitize_str(where);
-+			printk("max sem hold time %ld jiffies from %s "
-+				"to %s\n", diff, adev->last_sem, where);
-+			max_sem_time = diff;
-+		}
-+	}
-+	up(&adev->sem);
-+	if (acx_debug & L_LOCK) {
-+		where = sanitize_str(where);
-+		printk("%s: sem_up %d -> %d\n",
-+			where, sem_count, atomic_read(&adev->sem.count));
-+	}
-+}
-+#endif /* PARANOID_LOCKING */
-+
-+
-+/***********************************************************************
-+*/
-+#if ACX_DEBUG > 1
-+
-+static int acx_debug_func_indent;
-+#define DEBUG_TSC 0
-+#define FUNC_INDENT_INCREMENT 2
-+
-+#if DEBUG_TSC
-+#define TIMESTAMP(d) unsigned long d; rdtscl(d)
-+#else
-+#define TIMESTAMP(d) unsigned long d = jiffies
-+#endif
-+
-+static const char
-+spaces[] = "          " "          "; /* Nx10 spaces */
-+
-+void
-+log_fn_enter(const char *funcname)
-+{
-+	int indent;
-+	TIMESTAMP(d);
-+
-+	indent = acx_debug_func_indent;
-+	if (indent >= sizeof(spaces))
-+		indent = sizeof(spaces)-1;
-+
-+	printk("%08ld %s==> %s\n",
-+		d % 100000000,
-+		spaces + (sizeof(spaces)-1) - indent,
-+		funcname
-+	);
-+
-+	acx_debug_func_indent += FUNC_INDENT_INCREMENT;
-+}
-+void
-+log_fn_exit(const char *funcname)
-+{
-+	int indent;
-+	TIMESTAMP(d);
-+
-+	acx_debug_func_indent -= FUNC_INDENT_INCREMENT;
-+
-+	indent = acx_debug_func_indent;
-+	if (indent >= sizeof(spaces))
-+		indent = sizeof(spaces)-1;
-+
-+	printk("%08ld %s<== %s\n",
-+		d % 100000000,
-+		spaces + (sizeof(spaces)-1) - indent,
-+		funcname
-+	);
-+}
-+void
-+log_fn_exit_v(const char *funcname, int v)
-+{
-+	int indent;
-+	TIMESTAMP(d);
-+
-+	acx_debug_func_indent -= FUNC_INDENT_INCREMENT;
-+
-+	indent = acx_debug_func_indent;
-+	if (indent >= sizeof(spaces))
-+		indent = sizeof(spaces)-1;
-+
-+	printk("%08ld %s<== %s: %08X\n",
-+		d % 100000000,
-+		spaces + (sizeof(spaces)-1) - indent,
-+		funcname,
-+		v
-+	);
-+}
-+#endif /* ACX_DEBUG > 1 */
-+
-+
-+/***********************************************************************
-+** Basically a msleep with logging
-+*/
-+void
-+acx_s_msleep(int ms)
-+{
-+	FN_ENTER;
-+	msleep(ms);
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** Not inlined: it's larger than it seems
-+*/
-+void
-+acx_print_mac(const char *head, const u8 *mac, const char *tail)
-+{
-+	printk("%s"MACSTR"%s", head, MAC(mac), tail);
-+}
-+
-+
-+/***********************************************************************
-+** acx_get_status_name
-+*/
-+static const char*
-+acx_get_status_name(u16 status)
-+{
-+	static const char * const str[] = {
-+		"STOPPED", "SCANNING", "WAIT_AUTH",
-+		"AUTHENTICATED", "ASSOCIATED", "INVALID??"
-+	};
-+	if (status > VEC_SIZE(str)-1)
-+		status = VEC_SIZE(str)-1;
-+
-+	return str[status];
-+}
-+
-+
-+/***********************************************************************
-+** acx_get_packet_type_string
-+*/
-+#if ACX_DEBUG
-+const char*
-+acx_get_packet_type_string(u16 fc)
-+{
-+	static const char * const mgmt_arr[] = {
-+		"MGMT/AssocReq", "MGMT/AssocResp", "MGMT/ReassocReq",
-+		"MGMT/ReassocResp", "MGMT/ProbeReq", "MGMT/ProbeResp",
-+		"MGMT/UNKNOWN", "MGMT/UNKNOWN", "MGMT/Beacon", "MGMT/ATIM",
-+		"MGMT/Disassoc", "MGMT/Authen", "MGMT/Deauthen"
-+	};
-+	static const char * const ctl_arr[] = {
-+		"CTL/PSPoll", "CTL/RTS", "CTL/CTS", "CTL/Ack", "CTL/CFEnd",
-+		"CTL/CFEndCFAck"
-+	};
-+	static const char * const data_arr[] = {
-+		"DATA/DataOnly", "DATA/Data CFAck", "DATA/Data CFPoll",
-+		"DATA/Data CFAck/CFPoll", "DATA/Null", "DATA/CFAck",
-+		"DATA/CFPoll", "DATA/CFAck/CFPoll"
-+	};
-+	const char *str;
-+	u8 fstype = (WF_FC_FSTYPE & fc) >> 4;
-+	u8 ctl;
-+
-+	switch (WF_FC_FTYPE & fc) {
-+	case WF_FTYPE_MGMT:
-+		if (fstype < VEC_SIZE(mgmt_arr))
-+			str = mgmt_arr[fstype];
-+		else
-+			str = "MGMT/UNKNOWN";
-+		break;
-+	case WF_FTYPE_CTL:
-+		ctl = fstype - 0x0a;
-+		if (ctl < VEC_SIZE(ctl_arr))
-+			str = ctl_arr[ctl];
-+		else
-+			str = "CTL/UNKNOWN";
-+		break;
-+	case WF_FTYPE_DATA:
-+		if (fstype < VEC_SIZE(data_arr))
-+			str = data_arr[fstype];
-+		else
-+			str = "DATA/UNKNOWN";
-+		break;
-+	default:
-+		str = "UNKNOWN";
-+		break;
-+	}
-+	return str;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_wlan_reason_str
-+*/
-+static inline const char*
-+acx_wlan_reason_str(u16 reason)
-+{
-+	static const char* const reason_str[] = {
-+	/*  0 */	"?",
-+	/*  1 */	"unspecified",
-+	/*  2 */	"prev auth is not valid",
-+	/*  3 */	"leaving BBS",
-+	/*  4 */	"due to inactivity",
-+	/*  5 */	"AP is busy",
-+	/*  6 */	"got class 2 frame from non-auth'ed STA",
-+	/*  7 */	"got class 3 frame from non-assoc'ed STA",
-+	/*  8 */	"STA has left BSS",
-+	/*  9 */	"assoc without auth is not allowed",
-+	/* 10 */	"bad power setting (802.11h)",
-+	/* 11 */	"bad channel (802.11i)",
-+	/* 12 */	"?",
-+	/* 13 */	"invalid IE",
-+	/* 14 */	"MIC failure",
-+	/* 15 */	"four-way handshake timeout",
-+	/* 16 */	"group key handshake timeout",
-+	/* 17 */	"IE is different",
-+	/* 18 */	"invalid group cipher",
-+	/* 19 */	"invalid pairwise cipher",
-+	/* 20 */	"invalid AKMP",
-+	/* 21 */	"unsupported RSN version",
-+	/* 22 */	"invalid RSN IE cap",
-+	/* 23 */	"802.1x failed",
-+	/* 24 */	"cipher suite rejected"
-+	};
-+	return reason < VEC_SIZE(reason_str) ? reason_str[reason] : "?";
-+}
-+
-+
-+/***********************************************************************
-+** acx_cmd_status_str
-+*/
-+const char*
-+acx_cmd_status_str(unsigned int state)
-+{
-+	static const char * const cmd_error_strings[] = {
-+		"Idle",
-+		"Success",
-+		"Unknown Command",
-+		"Invalid Information Element",
-+		"Channel rejected",
-+		"Channel invalid in current regulatory domain",
-+		"MAC invalid",
-+		"Command rejected (read-only information element)",
-+		"Command rejected",
-+		"Already asleep",
-+		"TX in progress",
-+		"Already awake",
-+		"Write only",
-+		"RX in progress",
-+		"Invalid parameter",
-+		"Scan in progress",
-+		"Failed"
-+	};
-+	return state < VEC_SIZE(cmd_error_strings) ?
-+			cmd_error_strings[state] : "?";
-+}
-+
-+
-+/***********************************************************************
-+** get_status_string
-+*/
-+static inline const char*
-+get_status_string(unsigned int status)
-+{
-+	/* A bit shortened, but hopefully still understandable */
-+	static const char * const status_str[] = {
-+	/* 0 */	"Successful",
-+	/* 1 */	"Unspecified failure",
-+	/* 2 */	"reserved",
-+	/* 3 */	"reserved",
-+	/* 4 */	"reserved",
-+	/* 5 */	"reserved",
-+	/* 6 */	"reserved",
-+	/* 7 */	"reserved",
-+	/* 8 */	"reserved",
-+	/* 9 */	"reserved",
-+	/*10 */	"Cannot support all requested capabilities in Capability Information field",
-+	/*11 */	"Reassoc denied (reason outside of 802.11b scope)",
-+	/*12 */	"Assoc denied (reason outside of 802.11b scope) -- maybe MAC filtering by peer?",
-+	/*13 */	"Responding station doesnt support specified auth algorithm -- maybe WEP auth Open vs. Restricted?",
-+	/*14 */	"Auth rejected: wrong transaction sequence number",
-+	/*15 */	"Auth rejected: challenge failure",
-+	/*16 */	"Auth rejected: timeout for next frame in sequence",
-+	/*17 */	"Assoc denied: too many STAs on this AP",
-+	/*18 */	"Assoc denied: requesting STA doesnt support all data rates in basic set",
-+	/*19 */	"Assoc denied: requesting STA doesnt support Short Preamble",
-+	/*20 */	"Assoc denied: requesting STA doesnt support PBCC Modulation",
-+	/*21 */	"Assoc denied: requesting STA doesnt support Channel Agility"
-+	/*22 */	"reserved",
-+	/*23 */	"reserved",
-+	/*24 */	"reserved",
-+	/*25 */	"Assoc denied: requesting STA doesnt support Short Slot Time",
-+	/*26 */	"Assoc denied: requesting STA doesnt support DSSS-OFDM"
-+	};
-+
-+	return status_str[status < VEC_SIZE(status_str) ? status : 2];
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr)
-+{
-+	if (acx_debug & L_ASSOC) {
-+		int offset = (u8*)ie_ptr - (u8*)hdr;
-+		printk("acx: unknown EID %d in mgmt frame at offset %d. IE: ",
-+				ie_ptr->eid, offset);
-+	/* IE len can be bogus, IE can extend past packet end. Oh well... */
-+		acx_dump_bytes(ie_ptr, ie_ptr->len + 2);
-+		if (acx_debug & L_DATA) {
-+			printk("frame (%s): ",
-+			acx_get_packet_type_string(le16_to_cpu(hdr->fc)));
-+			acx_dump_bytes(hdr, len);
-+		}
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#if ACX_DEBUG
-+void
-+acx_dump_bytes(const void *data, int num)
-+{
-+	const u8* ptr = (const u8*)data;
-+
-+	if (num <= 0) {
-+		printk("\n");
-+		return;
-+	}
-+
-+	while (num >= 16) {
-+		printk( "%02X %02X %02X %02X %02X %02X %02X %02X "
-+			"%02X %02X %02X %02X %02X %02X %02X %02X\n",
-+			ptr[0], ptr[1], ptr[2], ptr[3],
-+			ptr[4], ptr[5], ptr[6], ptr[7],
-+			ptr[8], ptr[9], ptr[10], ptr[11],
-+			ptr[12], ptr[13], ptr[14], ptr[15]);
-+		num -= 16;
-+		ptr += 16;
-+	}
-+	if (num > 0) {
-+		while (--num > 0)
-+			printk("%02X ", *ptr++);
-+		printk("%02X\n", *ptr);
-+	}
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_s_get_firmware_version
-+*/
-+void
-+acx_s_get_firmware_version(acx_device_t *adev)
-+{
-+	fw_ver_t fw;
-+	u8 hexarr[4] = { 0, 0, 0, 0 };
-+	int hexidx = 0, val = 0;
-+	const char *num;
-+	char c;
-+
-+	FN_ENTER;
-+
-+	memset(fw.fw_id, 'E', FW_ID_SIZE);
-+	acx_s_interrogate(adev, &fw, ACX1xx_IE_FWREV);
-+	memcpy(adev->firmware_version, fw.fw_id, FW_ID_SIZE);
-+	adev->firmware_version[FW_ID_SIZE] = '\0';
-+
-+	log(L_DEBUG, "fw_ver: fw_id='%s' hw_id=%08X\n",
-+				adev->firmware_version, fw.hw_id);
-+
-+	if (strncmp(fw.fw_id, "Rev ", 4) != 0) {
-+		printk("acx: strange firmware version string "
-+			"'%s', please report\n", adev->firmware_version);
-+		adev->firmware_numver = 0x01090407; /* assume 1.9.4.7 */
-+	} else {
-+		num = &fw.fw_id[4];
-+		while (1) {
-+			c = *num++;
-+			if ((c == '.') || (c == '\0')) {
-+				hexarr[hexidx++] = val;
-+				if ((hexidx > 3) || (c == '\0')) /* end? */
-+					break;
-+				val = 0;
-+				continue;
-+			}
-+			if ((c >= '0') && (c <= '9'))
-+				c -= '0';
-+			else
-+				c = c - 'a' + (char)10;
-+			val = val*16 + c;
-+		}
-+
-+		adev->firmware_numver = (u32)(
-+				(hexarr[0] << 24) | (hexarr[1] << 16)
-+				| (hexarr[2] << 8) | hexarr[3]);
-+		log(L_DEBUG, "firmware_numver 0x%08X\n", adev->firmware_numver);
-+	}
-+	if (IS_ACX111(adev)) {
-+		if (adev->firmware_numver == 0x00010011) {
-+			/* This one does not survive floodpinging */
-+			printk("acx: firmware '%s' is known to be buggy, "
-+				"please upgrade\n", adev->firmware_version);
-+		}
-+	}
-+
-+	adev->firmware_id = le32_to_cpu(fw.hw_id);
-+
-+	/* we're able to find out more detailed chip names now */
-+	switch (adev->firmware_id & 0xffff0000) {
-+		case 0x01010000:
-+		case 0x01020000:
-+			adev->chip_name = "TNETW1100A";
-+			break;
-+		case 0x01030000:
-+			adev->chip_name = "TNETW1100B";
-+			break;
-+		case 0x03000000:
-+		case 0x03010000:
-+			adev->chip_name = "TNETW1130";
-+			break;
-+		case 0x04030000: /* 0x04030101 is TNETW1450 */
-+			adev->chip_name = "TNETW1450";
-+			break;
-+		default:
-+			printk("acx: unknown chip ID 0x%08X, "
-+				"please report\n", adev->firmware_id);
-+			break;
-+	}
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_display_hardware_details
-+**
-+** Displays hw/fw version, radio type etc...
-+*/
-+void
-+acx_display_hardware_details(acx_device_t *adev)
-+{
-+	const char *radio_str, *form_str;
-+
-+	FN_ENTER;
-+
-+	switch (adev->radio_type) {
-+	case RADIO_MAXIM_0D:
-+		radio_str = "Maxim";
-+		break;
-+	case RADIO_RFMD_11:
-+		radio_str = "RFMD";
-+		break;
-+	case RADIO_RALINK_15:
-+		radio_str = "Ralink";
-+		break;
-+	case RADIO_RADIA_16:
-+		radio_str = "Radia";
-+		break;
-+	case RADIO_UNKNOWN_17:
-+		/* TI seems to have a radio which is
-+		 * additionally 802.11a capable, too */
-+		radio_str = "802.11a/b/g radio?! Please report";
-+		break;
-+	case RADIO_UNKNOWN_19:
-+		radio_str = "A radio used by Safecom cards?! Please report";
-+		break;
-+	case RADIO_UNKNOWN_1B:
-+		radio_str = "An unknown radio used by TNETW1450 USB adapters";
-+		break;
-+	default:
-+		radio_str = "UNKNOWN, please report radio type name!";
-+		break;
-+	}
-+
-+	switch (adev->form_factor) {
-+	case 0x00:
-+		form_str = "unspecified";
-+		break;
-+	case 0x01:
-+		form_str = "(mini-)PCI / CardBus";
-+		break;
-+	case 0x02:
-+		form_str = "USB";
-+		break;
-+	case 0x03:
-+		form_str = "Compact Flash";
-+		break;
-+	default:
-+		form_str = "UNKNOWN, please report";
-+		break;
-+	}
-+
-+	printk("acx: === chipset %s, radio type 0x%02X (%s), "
-+		"form factor 0x%02X (%s), EEPROM version 0x%02X: "
-+		"uploaded firmware '%s' ===\n",
-+		adev->chip_name, adev->radio_type, radio_str,
-+		adev->form_factor, form_str, adev->eeprom_version,
-+		adev->firmware_version);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx_e_change_mtu(struct net_device *ndev, int mtu)
-+{
-+	enum {
-+		MIN_MTU = 256,
-+		MAX_MTU = WLAN_DATA_MAXLEN - (ETH_HLEN)
-+	};
-+
-+	if (mtu < MIN_MTU || mtu > MAX_MTU)
-+		return -EINVAL;
-+
-+	ndev->mtu = mtu;
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_e_get_stats, acx_e_get_wireless_stats
-+*/
-+struct net_device_stats*
-+acx_e_get_stats(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	return &adev->stats;
-+}
-+
-+struct iw_statistics*
-+acx_e_get_wireless_stats(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	return &adev->wstats;
-+}
-+
-+
-+/***********************************************************************
-+** maps acx111 tx descr rate field to acx100 one
-+*/
-+const u8
-+acx_bitpos2rate100[] = {
-+	RATE100_1	,/* 0 */
-+	RATE100_2	,/* 1 */
-+	RATE100_5	,/* 2 */
-+	RATE100_2	,/* 3, should not happen */
-+	RATE100_2	,/* 4, should not happen */
-+	RATE100_11	,/* 5 */
-+	RATE100_2	,/* 6, should not happen */
-+	RATE100_2	,/* 7, should not happen */
-+	RATE100_22	,/* 8 */
-+	RATE100_2	,/* 9, should not happen */
-+	RATE100_2	,/* 10, should not happen */
-+	RATE100_2	,/* 11, should not happen */
-+	RATE100_2	,/* 12, should not happen */
-+	RATE100_2	,/* 13, should not happen */
-+	RATE100_2	,/* 14, should not happen */
-+	RATE100_2	,/* 15, should not happen */
-+};
-+
-+u8
-+acx_rate111to100(u16 r) {
-+	return acx_bitpos2rate100[highest_bit(r)];
-+}
-+
-+
-+/***********************************************************************
-+** Calculate level like the feb 2003 windows driver seems to do
-+*/
-+static u8
-+acx_signal_to_winlevel(u8 rawlevel)
-+{
-+	/* u8 winlevel = (u8) (0.5 + 0.625 * rawlevel); */
-+	u8 winlevel = ((4 + (rawlevel * 5)) / 8);
-+
-+	if (winlevel > 100)
-+		winlevel = 100;
-+	return winlevel;
-+}
-+
-+u8
-+acx_signal_determine_quality(u8 signal, u8 noise)
-+{
-+	int qual;
-+
-+	qual = (((signal - 30) * 100 / 70) + (100 - noise * 4)) / 2;
-+
-+	if (qual > 100)
-+		return 100;
-+	if (qual < 0)
-+		return 0;
-+	return qual;
-+}
-+
-+
-+/***********************************************************************
-+** Interrogate/configure commands
-+*/
-+
-+/* FIXME: the lengths given here probably aren't always correct.
-+ * They should be gradually replaced by proper "sizeof(acx1XX_ie_XXXX)-4",
-+ * unless the firmware actually expects a different length than the struct length */
-+static const u16
-+acx100_ie_len[] = {
-+	0,
-+	ACX100_IE_ACX_TIMER_LEN,
-+	sizeof(acx100_ie_powersave_t)-4, /* is that 6 or 8??? */
-+	ACX1xx_IE_QUEUE_CONFIG_LEN,
-+	ACX100_IE_BLOCK_SIZE_LEN,
-+	ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN,
-+	ACX1xx_IE_RATE_FALLBACK_LEN,
-+	ACX100_IE_WEP_OPTIONS_LEN,
-+	ACX1xx_IE_MEMORY_MAP_LEN, /*	ACX1xx_IE_SSID_LEN, */
-+	0,
-+	ACX1xx_IE_ASSOC_ID_LEN,
-+	0,
-+	ACX111_IE_CONFIG_OPTIONS_LEN,
-+	ACX1xx_IE_FWREV_LEN,
-+	ACX1xx_IE_FCS_ERROR_COUNT_LEN,
-+	ACX1xx_IE_MEDIUM_USAGE_LEN,
-+	ACX1xx_IE_RXCONFIG_LEN,
-+	0,
-+	0,
-+	sizeof(fw_stats_t)-4,
-+	0,
-+	ACX1xx_IE_FEATURE_CONFIG_LEN,
-+	ACX111_IE_KEY_CHOOSE_LEN,
-+	ACX1FF_IE_MISC_CONFIG_TABLE_LEN,
-+	ACX1FF_IE_WONE_CONFIG_LEN,
-+	0,
-+	ACX1FF_IE_TID_CONFIG_LEN,
-+	0,
-+	0,
-+	0,
-+	ACX1FF_IE_CALIB_ASSESSMENT_LEN,
-+	ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN,
-+	ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN,
-+	ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN,
-+	0,
-+	ACX1FF_IE_PACKET_DETECT_THRESH_LEN,
-+	ACX1FF_IE_TX_CONFIG_OPTIONS_LEN,
-+	ACX1FF_IE_CCA_THRESHOLD_LEN,
-+	ACX1FF_IE_EVENT_MASK_LEN,
-+	ACX1FF_IE_DTIM_PERIOD_LEN,
-+	0,
-+	ACX1FF_IE_ACI_CONFIG_SET_LEN,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	ACX1FF_IE_EEPROM_VER_LEN,
-+};
-+
-+static const u16
-+acx100_ie_len_dot11[] = {
-+	0,
-+	ACX1xx_IE_DOT11_STATION_ID_LEN,
-+	0,
-+	ACX100_IE_DOT11_BEACON_PERIOD_LEN,
-+	ACX1xx_IE_DOT11_DTIM_PERIOD_LEN,
-+	ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN,
-+	ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN,
-+	ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN,
-+	ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN,
-+	0,
-+	ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN,
-+	ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN,
-+	0,
-+	ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN,
-+	ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN,
-+	ACX100_IE_DOT11_ED_THRESHOLD_LEN,
-+	ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN,
-+	0,
-+	0,
-+	0,
-+};
-+
-+static const u16
-+acx111_ie_len[] = {
-+	0,
-+	ACX100_IE_ACX_TIMER_LEN,
-+	sizeof(acx111_ie_powersave_t)-4,
-+	ACX1xx_IE_QUEUE_CONFIG_LEN,
-+	ACX100_IE_BLOCK_SIZE_LEN,
-+	ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN,
-+	ACX1xx_IE_RATE_FALLBACK_LEN,
-+	ACX100_IE_WEP_OPTIONS_LEN,
-+	ACX1xx_IE_MEMORY_MAP_LEN, /*	ACX1xx_IE_SSID_LEN, */
-+	0,
-+	ACX1xx_IE_ASSOC_ID_LEN,
-+	0,
-+	ACX111_IE_CONFIG_OPTIONS_LEN,
-+	ACX1xx_IE_FWREV_LEN,
-+	ACX1xx_IE_FCS_ERROR_COUNT_LEN,
-+	ACX1xx_IE_MEDIUM_USAGE_LEN,
-+	ACX1xx_IE_RXCONFIG_LEN,
-+	0,
-+	0,
-+	sizeof(fw_stats_t)-4,
-+	0,
-+	ACX1xx_IE_FEATURE_CONFIG_LEN,
-+	ACX111_IE_KEY_CHOOSE_LEN,
-+	ACX1FF_IE_MISC_CONFIG_TABLE_LEN,
-+	ACX1FF_IE_WONE_CONFIG_LEN,
-+	0,
-+	ACX1FF_IE_TID_CONFIG_LEN,
-+	0,
-+	0,
-+	0,
-+	ACX1FF_IE_CALIB_ASSESSMENT_LEN,
-+	ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN,
-+	ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN,
-+	ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN,
-+	0,
-+	ACX1FF_IE_PACKET_DETECT_THRESH_LEN,
-+	ACX1FF_IE_TX_CONFIG_OPTIONS_LEN,
-+	ACX1FF_IE_CCA_THRESHOLD_LEN,
-+	ACX1FF_IE_EVENT_MASK_LEN,
-+	ACX1FF_IE_DTIM_PERIOD_LEN,
-+	0,
-+	ACX1FF_IE_ACI_CONFIG_SET_LEN,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	ACX1FF_IE_EEPROM_VER_LEN,
-+};
-+
-+static const u16
-+acx111_ie_len_dot11[] = {
-+	0,
-+	ACX1xx_IE_DOT11_STATION_ID_LEN,
-+	0,
-+	ACX100_IE_DOT11_BEACON_PERIOD_LEN,
-+	ACX1xx_IE_DOT11_DTIM_PERIOD_LEN,
-+	ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN,
-+	ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN,
-+	ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN,
-+	ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN,
-+	0,
-+	ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN,
-+	ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN,
-+	0,
-+	ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN,
-+	ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN,
-+	ACX100_IE_DOT11_ED_THRESHOLD_LEN,
-+	ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN,
-+	0,
-+	0,
-+	0,
-+};
-+
-+
-+#undef FUNC
-+#define FUNC "configure"
-+#if !ACX_DEBUG
-+int
-+acx_s_configure(acx_device_t *adev, void *pdr, int type)
-+{
-+#else
-+int
-+acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* typestr)
-+{
-+#endif
-+	u16 len;
-+	int res;
-+
-+	if (type < 0x1000)
-+		len = adev->ie_len[type];
-+	else
-+		len = adev->ie_len_dot11[type - 0x1000];
-+
-+	log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len);
-+	if (unlikely(!len)) {
-+		log(L_DEBUG, "zero-length type %s?!\n", typestr);
-+	}
-+
-+	((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type);
-+	((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len);
-+	res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIGURE, pdr, len + 4);
-+	if (unlikely(OK != res)) {
-+#if ACX_DEBUG
-+		printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr);
-+#else
-+		printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type);
-+#endif
-+		/* dump_stack() is already done in issue_cmd() */
-+	}
-+	return res;
-+}
-+
-+#undef FUNC
-+#define FUNC "interrogate"
-+#if !ACX_DEBUG
-+int
-+acx_s_interrogate(acx_device_t *adev, void *pdr, int type)
-+{
-+#else
-+int
-+acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type,
-+		const char* typestr)
-+{
-+#endif
-+	u16 len;
-+	int res;
-+
-+	/* FIXME: no check whether this exceeds the array yet.
-+	 * We should probably remember the number of entries... */
-+	if (type < 0x1000)
-+		len = adev->ie_len[type];
-+	else
-+		len = adev->ie_len_dot11[type-0x1000];
-+
-+	log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len);
-+
-+	((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type);
-+	((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len);
-+	res = acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, pdr, len + 4);
-+	if (unlikely(OK != res)) {
-+#if ACX_DEBUG
-+		printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr);
-+#else
-+		printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type);
-+#endif
-+		/* dump_stack() is already done in issue_cmd() */
-+	}
-+	return res;
-+}
-+
-+#if CMD_DISCOVERY
-+void
-+great_inquisitor(acx_device_t *adev)
-+{
-+	static struct {
-+		u16	type;
-+		u16	len;
-+		/* 0x200 was too large here: */
-+		u8	data[0x100 - 4];
-+	} ACX_PACKED ie;
-+	u16 type;
-+
-+	FN_ENTER;
-+
-+	/* 0..0x20, 0x1000..0x1020 */
-+	for (type = 0; type <= 0x1020; type++) {
-+		if (type == 0x21)
-+			type = 0x1000;
-+		ie.type = cpu_to_le16(type);
-+		ie.len = cpu_to_le16(sizeof(ie) - 4);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, &ie, sizeof(ie));
-+	}
-+	FN_EXIT0;
-+}
-+#endif
-+
-+
-+#ifdef CONFIG_PROC_FS
-+/***********************************************************************
-+** /proc files
-+*/
-+/***********************************************************************
-+** acx_l_proc_output
-+** Generate content for our /proc entry
-+**
-+** Arguments:
-+**	buf is a pointer to write output to
-+**	adev is the usual pointer to our private struct acx_device
-+** Returns:
-+**	number of bytes actually written to buf
-+** Side effects:
-+**	none
-+*/
-+static int
-+acx_l_proc_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	p += sprintf(p,
-+		"acx driver version:\t\t" ACX_RELEASE "\n"
-+		"Wireless extension version:\t" STRING(WIRELESS_EXT) "\n"
-+		"chip name:\t\t\t%s (0x%08X)\n"
-+		"radio type:\t\t\t0x%02X\n"
-+		"form factor:\t\t\t0x%02X\n"
-+		"EEPROM version:\t\t\t0x%02X\n"
-+		"firmware version:\t\t%s (0x%08X)\n",
-+		adev->chip_name, adev->firmware_id,
-+		adev->radio_type,
-+		adev->form_factor,
-+		adev->eeprom_version,
-+		adev->firmware_version, adev->firmware_numver);
-+
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		struct client *bss = &adev->sta_list[i];
-+		if (!bss->used) continue;
-+		p += sprintf(p, "BSS %u BSSID "MACSTR" ESSID %s channel %u "
-+			"Cap 0x%X SIR %u SNR %u\n",
-+			i, MAC(bss->bssid), (char*)bss->essid, bss->channel,
-+			bss->cap_info, bss->sir, bss->snr);
-+	}
-+	p += sprintf(p, "status:\t\t\t%u (%s)\n",
-+			adev->status, acx_get_status_name(adev->status));
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_s_proc_diag_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	unsigned long flags;
-+	unsigned int len = 0, partlen;
-+	u32 temp1, temp2;
-+	u8 *st, *st_end;
-+#ifdef __BIG_ENDIAN
-+	u8 *st2;
-+#endif
-+	fw_stats_t *fw_stats;
-+	char *part_str = NULL;
-+	fw_stats_tx_t *tx = NULL;
-+	fw_stats_rx_t *rx = NULL;
-+	fw_stats_dma_t *dma = NULL;
-+	fw_stats_irq_t *irq = NULL;
-+	fw_stats_wep_t *wep = NULL;
-+	fw_stats_pwr_t *pwr = NULL;
-+	fw_stats_mic_t *mic = NULL;
-+	fw_stats_aes_t *aes = NULL;
-+	fw_stats_event_t *evt = NULL;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+#if defined (ACX_MEM)
-+	p = acxmem_s_proc_diag_output(p, adev);
-+#else
-+	if (IS_PCI(adev))
-+		p = acxpci_s_proc_diag_output(p, adev);
-+#endif
-+
-+	p += sprintf(p,
-+		"\n"
-+		"** network status **\n"
-+		"dev_state_mask 0x%04X\n"
-+		"status %u (%s), "
-+		"mode %u, channel %u, "
-+		"reg_dom_id 0x%02X, reg_dom_chanmask 0x%04X, ",
-+		adev->dev_state_mask,
-+		adev->status, acx_get_status_name(adev->status),
-+		adev->mode, adev->channel,
-+		adev->reg_dom_id, adev->reg_dom_chanmask
-+		);
-+	p += sprintf(p,
-+		"ESSID \"%s\", essid_active %d, essid_len %d, "
-+		"essid_for_assoc \"%s\", nick \"%s\"\n"
-+		"WEP ena %d, restricted %d, idx %d\n",
-+		adev->essid, adev->essid_active, (int)adev->essid_len,
-+		adev->essid_for_assoc, adev->nick,
-+		adev->wep_enabled, adev->wep_restricted,
-+		adev->wep_current_index);
-+	p += sprintf(p, "dev_addr  "MACSTR"\n", MAC(adev->dev_addr));
-+	p += sprintf(p, "bssid     "MACSTR"\n", MAC(adev->bssid));
-+	p += sprintf(p, "ap_filter "MACSTR"\n", MAC(adev->ap));
-+
-+	p += sprintf(p,
-+		"\n"
-+		"** PHY status **\n"
-+		"tx_disabled %d, tx_level_dbm %d\n" /* "tx_level_val %d, tx_level_auto %d\n" */
-+		"sensitivity %d, antenna 0x%02X, ed_threshold %d, cca %d, preamble_mode %d\n"
-+		"rate_basic 0x%04X, rate_oper 0x%04X\n"
-+		"rts_threshold %d, frag_threshold %d, short_retry %d, long_retry %d\n"
-+		"msdu_lifetime %d, listen_interval %d, beacon_interval %d\n",
-+		adev->tx_disabled, adev->tx_level_dbm, /* adev->tx_level_val, adev->tx_level_auto, */
-+		adev->sensitivity, adev->antenna, adev->ed_threshold, adev->cca, adev->preamble_mode,
-+		adev->rate_basic, adev->rate_oper,
-+		adev->rts_threshold, adev->frag_threshold, adev->short_retry, adev->long_retry,
-+		adev->msdu_lifetime, adev->listen_interval, adev->beacon_interval);
-+
-+	acx_unlock(adev, flags);
-+
-+	p += sprintf(p,
-+		"\n"
-+		"** Firmware **\n"
-+		"NOTE: version dependent statistics layout, "
-+		"please report if you suspect wrong parsing!\n"
-+		"\n"
-+		"version \"%s\"\n", adev->firmware_version);
-+
-+	/* TODO: may replace kmalloc/memset with kzalloc once
-+	 * Linux 2.6.14 is widespread */
-+	fw_stats = kmalloc(sizeof(*fw_stats), GFP_KERNEL);
-+	if (!fw_stats) {
-+		FN_EXIT1(0);
-+		return 0;
-+	}
-+	memset(fw_stats, 0, sizeof(*fw_stats));
-+
-+	st = (u8 *)fw_stats;
-+
-+	part_str = "statistics query command";
-+
-+	if (OK != acx_s_interrogate(adev, st, ACX1xx_IE_FIRMWARE_STATISTICS))
-+		goto fw_stats_end;
-+
-+	st += sizeof(u16);
-+	len = *(u16 *)st;
-+
-+	if (len > sizeof(*fw_stats)) {
-+		p += sprintf(p,
-+			"firmware version with bigger fw_stats struct detected\n"
-+			"(%u vs. %u), please report\n", len, sizeof(fw_stats_t));
-+		if (len > sizeof(*fw_stats)) {
-+			p += sprintf(p, "struct size exceeded allocation!\n");
-+			len = sizeof(*fw_stats);
-+		}
-+	}
-+	st += sizeof(u16);
-+	st_end = st - 2*sizeof(u16) + len;
-+
-+#ifdef __BIG_ENDIAN
-+	/* let's make one bold assumption here:
-+	 * (hopefully!) *all* statistics fields are u32 only,
-+	 * thus if we need to make endianness corrections
-+	 * we can simply do them in one go, in advance */
-+	st2 = (u8 *)fw_stats;
-+	for (temp1 = 0; temp1 < len; temp1 += 4, st2 += 4)
-+		*(u32 *)st2 = le32_to_cpu(*(u32 *)st2);
-+#endif
-+
-+	part_str = "Rx/Tx";
-+
-+	/* directly at end of a struct part? --> no error! */
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	tx = (fw_stats_tx_t *)st;
-+	st += sizeof(fw_stats_tx_t);
-+	rx = (fw_stats_rx_t *)st;
-+	st += sizeof(fw_stats_rx_t);
-+	partlen = sizeof(fw_stats_tx_t) + sizeof(fw_stats_rx_t);
-+
-+	if (IS_ACX100(adev)) {
-+		/* at least ACX100 PCI F/W 1.9.8.b
-+		 * and ACX100 USB F/W 1.0.7-USB
-+		 * don't have those two fields... */
-+		st -= 2*sizeof(u32);
-+
-+		/* our parsing doesn't quite match this firmware yet,
-+		 * log failure */
-+		if (st > st_end)
-+			goto fw_stats_fail;
-+		temp1 = temp2 = 999999999;
-+	} else {
-+		if (st > st_end)
-+			goto fw_stats_fail;
-+		temp1 = rx->rx_aci_events;
-+		temp2 = rx->rx_aci_resets;
-+	}
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  tx_desc_overfl %u\n"
-+		"  rx_OutOfMem %u, rx_hdr_overfl %u, rx_hw_stuck %u\n"
-+		"  rx_dropped_frame %u, rx_frame_ptr_err %u, rx_xfr_hint_trig %u\n"
-+		"  rx_aci_events %u, rx_aci_resets %u\n",
-+		part_str,
-+		tx->tx_desc_of,
-+		rx->rx_oom,
-+		rx->rx_hdr_of,
-+		rx->rx_hw_stuck,
-+		rx->rx_dropped_frame,
-+		rx->rx_frame_ptr_err,
-+		rx->rx_xfr_hint_trig,
-+		temp1,
-+		temp2);
-+
-+	part_str = "DMA";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	dma = (fw_stats_dma_t *)st;
-+	partlen = sizeof(fw_stats_dma_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  rx_dma_req %u, rx_dma_err %u, tx_dma_req %u, tx_dma_err %u\n",
-+		part_str,
-+		dma->rx_dma_req,
-+		dma->rx_dma_err,
-+		dma->tx_dma_req,
-+		dma->tx_dma_err);
-+
-+	part_str = "IRQ";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	irq = (fw_stats_irq_t *)st;
-+	partlen = sizeof(fw_stats_irq_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  cmd_cplt %u, fiq %u\n"
-+		"  rx_hdrs %u, rx_cmplt %u, rx_mem_overfl %u, rx_rdys %u\n"
-+		"  irqs %u, tx_procs %u, decrypt_done %u\n"
-+		"  dma_0_done %u, dma_1_done %u, tx_exch_complet %u\n"
-+		"  commands %u, rx_procs %u, hw_pm_mode_changes %u\n"
-+		"  host_acks %u, pci_pm %u, acm_wakeups %u\n",
-+		part_str,
-+		irq->cmd_cplt,
-+		irq->fiq,
-+		irq->rx_hdrs,
-+		irq->rx_cmplt,
-+		irq->rx_mem_of,
-+		irq->rx_rdys,
-+		irq->irqs,
-+		irq->tx_procs,
-+		irq->decrypt_done,
-+		irq->dma_0_done,
-+		irq->dma_1_done,
-+		irq->tx_exch_complet,
-+		irq->commands,
-+		irq->rx_procs,
-+		irq->hw_pm_mode_changes,
-+		irq->host_acks,
-+		irq->pci_pm,
-+		irq->acm_wakeups);
-+
-+	part_str = "WEP";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	wep = (fw_stats_wep_t *)st;
-+	partlen = sizeof(fw_stats_wep_t);
-+	st += partlen;
-+
-+	if (
-+	    (IS_PCI(adev) && IS_ACX100(adev))
-+	||  (IS_USB(adev) && IS_ACX100(adev))
-+	||  (IS_MEM(adev) && IS_ACX100(adev))
-+	) {
-+		/* at least ACX100 PCI F/W 1.9.8.b,
-+		 * ACX100 USB F/W 1.0.7-USB
-+		 * and ACX100 Generic Slave F/W 1.10.7.K
-+		 * don't have those two fields...
-+		 */
-+		st -= 2*sizeof(u32);
-+		if (st > st_end)
-+			goto fw_stats_fail;
-+		temp1 = temp2 = 999999999;
-+	} else {
-+		if (st > st_end)
-+			goto fw_stats_fail;
-+		temp1 = wep->wep_pkt_decrypt;
-+		temp2 = wep->wep_decrypt_irqs;
-+	}
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  wep_key_count %u, wep_default_key_count %u, dot11_def_key_mib %u\n"
-+		"  wep_key_not_found %u, wep_decrypt_fail %u\n"
-+		"  wep_pkt_decrypt %u, wep_decrypt_irqs %u\n",
-+		part_str,
-+		wep->wep_key_count,
-+		wep->wep_default_key_count,
-+		wep->dot11_def_key_mib,
-+		wep->wep_key_not_found,
-+		wep->wep_decrypt_fail,
-+		temp1,
-+		temp2);
-+
-+	part_str = "power";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	pwr = (fw_stats_pwr_t *)st;
-+	partlen = sizeof(fw_stats_pwr_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  tx_start_ctr %u, no_ps_tx_too_short %u\n"
-+		"  rx_start_ctr %u, no_ps_rx_too_short %u\n"
-+		"  lppd_started %u\n"
-+		"  no_lppd_too_noisy %u, no_lppd_too_short %u, no_lppd_matching_frame %u\n",
-+		part_str,
-+		pwr->tx_start_ctr,
-+		pwr->no_ps_tx_too_short,
-+		pwr->rx_start_ctr,
-+		pwr->no_ps_rx_too_short,
-+		pwr->lppd_started,
-+		pwr->no_lppd_too_noisy,
-+		pwr->no_lppd_too_short,
-+		pwr->no_lppd_matching_frame);
-+
-+	part_str = "MIC";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	mic = (fw_stats_mic_t *)st;
-+	partlen = sizeof(fw_stats_mic_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  mic_rx_pkts %u, mic_calc_fail %u\n",
-+		part_str,
-+		mic->mic_rx_pkts,
-+		mic->mic_calc_fail);
-+
-+	part_str = "AES";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	aes = (fw_stats_aes_t *)st;
-+	partlen = sizeof(fw_stats_aes_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  aes_enc_fail %u, aes_dec_fail %u\n"
-+		"  aes_enc_pkts %u, aes_dec_pkts %u\n"
-+		"  aes_enc_irq %u, aes_dec_irq %u\n",
-+		part_str,
-+		aes->aes_enc_fail,
-+		aes->aes_dec_fail,
-+		aes->aes_enc_pkts,
-+		aes->aes_dec_pkts,
-+		aes->aes_enc_irq,
-+		aes->aes_dec_irq);
-+
-+	part_str = "event";
-+
-+	if (st == st_end)
-+		goto fw_stats_end;
-+
-+	evt = (fw_stats_event_t *)st;
-+	partlen = sizeof(fw_stats_event_t);
-+	st += partlen;
-+
-+	if (st > st_end)
-+		goto fw_stats_fail;
-+
-+	p += sprintf(p,
-+		"%s:\n"
-+		"  heartbeat %u, calibration %u\n"
-+		"  rx_mismatch %u, rx_mem_empty %u, rx_pool %u\n"
-+		"  oom_late %u\n"
-+		"  phy_tx_err %u, tx_stuck %u\n",
-+		part_str,
-+		evt->heartbeat,
-+		evt->calibration,
-+		evt->rx_mismatch,
-+		evt->rx_mem_empty,
-+		evt->rx_pool,
-+		evt->oom_late,
-+		evt->phy_tx_err,
-+		evt->tx_stuck);
-+
-+	if (st < st_end)
-+		goto fw_stats_bigger;
-+
-+	goto fw_stats_end;
-+
-+fw_stats_fail:
-+	st -= partlen;
-+	p += sprintf(p,
-+		"failed at %s part (size %u), offset %u (struct size %u), "
-+		"please report\n", part_str, partlen,
-+		(int)st - (int)fw_stats, len);
-+
-+fw_stats_bigger:
-+	for (; st < st_end; st += 4)
-+		p += sprintf(p,
-+			"UNKN%3d: %u\n", (int)st - (int)fw_stats, *(u32 *)st);
-+
-+fw_stats_end:
-+	kfree(fw_stats);
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_s_proc_phy_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/*
-+	if (RADIO_RFMD_11 != adev->radio_type) {
-+		printk("sorry, not yet adapted for radio types "
-+			"other than RFMD, please verify "
-+			"PHY size etc. first!\n");
-+		goto end;
-+	}
-+	*/
-+
-+	/* The PHY area is only 0x80 bytes long; further pages after that
-+	 * only have some page number registers with altered value,
-+	 * all other registers remain the same. */
-+	for (i = 0; i < 0x80; i++) {
-+		acx_s_read_phy_reg(adev, i, p++);
-+	}
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+** acx_e_read_proc_XXXX
-+** Handle our /proc entry
-+**
-+** Arguments:
-+**	standard kernel read_proc interface
-+** Returns:
-+**	number of bytes written to buf
-+** Side effects:
-+**	none
-+*/
-+static int
-+acx_e_read_proc(char *buf, char **start, off_t offset, int count,
-+		     int *eof, void *data)
-+{
-+	acx_device_t *adev = (acx_device_t*)data;
-+	unsigned long flags;
-+	int length;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+	/* fill buf */
-+	length = acx_l_proc_output(buf, adev);
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+
-+	/* housekeeping */
-+	if (length <= offset + count)
-+		*eof = 1;
-+	*start = buf + offset;
-+	length -= offset;
-+	if (length > count)
-+		length = count;
-+	if (length < 0)
-+		length = 0;
-+	FN_EXIT1(length);
-+	return length;
-+}
-+
-+static char _buf[32768];
-+static int
-+acx_e_read_proc_diag(char *buf, char **start, off_t offset, int count,
-+		     int *eof, void *data)
-+{
-+	acx_device_t *adev = (acx_device_t*)data;
-+	int length;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+	/* fill buf */
-+	length = acx_s_proc_diag_output(_buf, adev);
-+	acx_sem_unlock(adev);
-+
-+	memcpy(buf, _buf + offset, count);
-+
-+	/* housekeeping */
-+	if (length <= offset + count)
-+		*eof = 1;
-+	*start = count;
-+	length -= offset;
-+	if (length > count)
-+		length = count;
-+	if (length < 0)
-+		length = 0;
-+	FN_EXIT1(length);
-+	return length;
-+}
-+
-+static int
-+acx_e_read_proc_eeprom(char *buf, char **start, off_t offset, int count,
-+		     int *eof, void *data)
-+{
-+	acx_device_t *adev = (acx_device_t*)data;
-+	int length;
-+
-+	FN_ENTER;
-+
-+	/* fill buf */
-+	length = 0;
-+#if defined (ACX_MEM)
-+		acx_sem_lock(adev);
-+		length = acxmem_proc_eeprom_output(buf, adev);
-+		acx_sem_unlock(adev);
-+#else
-+	if (IS_PCI(adev)) {
-+		acx_sem_lock(adev);
-+		length = acxpci_proc_eeprom_output(buf, adev);
-+		acx_sem_unlock(adev);
-+	}
-+#endif
-+
-+	/* housekeeping */
-+	if (length <= offset + count)
-+		*eof = 1;
-+	*start = buf + offset;
-+	length -= offset;
-+	if (length > count)
-+		length = count;
-+	if (length < 0)
-+		length = 0;
-+	FN_EXIT1(length);
-+	return length;
-+}
-+
-+static int
-+acx_e_read_proc_phy(char *buf, char **start, off_t offset, int count,
-+		     int *eof, void *data)
-+{
-+	acx_device_t *adev = (acx_device_t*)data;
-+	int length;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+	/* fill buf */
-+	length = acx_s_proc_phy_output(buf, adev);
-+	acx_sem_unlock(adev);
-+
-+	/* housekeeping */
-+	if (length <= offset + count)
-+		*eof = 1;
-+	*start = buf + offset;
-+	length -= offset;
-+	if (length > count)
-+		length = count;
-+	if (length < 0)
-+		length = 0;
-+	FN_EXIT1(length);
-+	return length;
-+}
-+
-+
-+/***********************************************************************
-+** /proc files registration
-+*/
-+static const char * const
-+proc_files[] = { "", "_diag", "_eeprom", "_phy" };
-+
-+static read_proc_t * const
-+proc_funcs[] = {
-+	acx_e_read_proc,
-+	acx_e_read_proc_diag,
-+	acx_e_read_proc_eeprom,
-+	acx_e_read_proc_phy
-+};
-+
-+static int
-+manage_proc_entries(const struct net_device *ndev, int remove)
-+{
-+	acx_device_t *adev = ndev2adev((struct net_device *)ndev);
-+	char procbuf[80];
-+	int i;
-+
-+	for (i = 0; i < VEC_SIZE(proc_files); i++)	{
-+		snprintf(procbuf, sizeof(procbuf),
-+			"driver/acx_%s%s", ndev->name, proc_files[i]);
-+		log(L_INIT, "%sing /proc entry %s\n",
-+			remove ? "remov" : "creat", procbuf);
-+		if (!remove) {
-+			if (!create_proc_read_entry(procbuf, 0, 0, proc_funcs[i], adev)) {
-+				printk("acx: cannot register /proc entry %s\n", procbuf);
-+				return NOT_OK;
-+			}
-+		} else {
-+			remove_proc_entry(procbuf, NULL);
-+		}
-+	}
-+	return OK;
-+}
-+
-+int
-+acx_proc_register_entries(const struct net_device *ndev)
-+{
-+	return manage_proc_entries(ndev, 0);
-+}
-+
-+int
-+acx_proc_unregister_entries(const struct net_device *ndev)
-+{
-+	return manage_proc_entries(ndev, 1);
-+}
-+#endif /* CONFIG_PROC_FS */
-+
-+
-+/***********************************************************************
-+** acx_cmd_join_bssid
-+**
-+** Common code for both acx100 and acx111.
-+*/
-+/* NB: does NOT match RATE100_nn but matches ACX[111]_SCAN_RATE_n */
-+static const u8
-+bitpos2genframe_txrate[] = {
-+	10,	/*  0.  1 Mbit/s */
-+	20,	/*  1.  2 Mbit/s */
-+	55,	/*  2.  5.5 Mbit/s */
-+	0x0B,	/*  3.  6 Mbit/s */
-+	0x0F,	/*  4.  9 Mbit/s */
-+	110,	/*  5. 11 Mbit/s */
-+	0x0A,	/*  6. 12 Mbit/s */
-+	0x0E,	/*  7. 18 Mbit/s */
-+	220,	/*  8. 22 Mbit/s */
-+	0x09,	/*  9. 24 Mbit/s */
-+	0x0D,	/* 10. 36 Mbit/s */
-+	0x08,	/* 11. 48 Mbit/s */
-+	0x0C,	/* 12. 54 Mbit/s */
-+	10,	/* 13.  1 Mbit/s, should never happen */
-+	10,	/* 14.  1 Mbit/s, should never happen */
-+	10,	/* 15.  1 Mbit/s, should never happen */
-+};
-+
-+/* Looks scary, eh?
-+** Actually, each one compiled into one AND and one SHIFT,
-+** 31 bytes in x86 asm (more if uints are replaced by u16/u8) */
-+static inline unsigned int
-+rate111to5bits(unsigned int rate)
-+{
-+	return (rate & 0x7)
-+	| ( (rate & RATE111_11) / (RATE111_11/JOINBSS_RATES_11) )
-+	| ( (rate & RATE111_22) / (RATE111_22/JOINBSS_RATES_22) )
-+	;
-+}
-+
-+static void
-+acx_s_cmd_join_bssid(acx_device_t *adev, const u8 *bssid)
-+{
-+	acx_joinbss_t tmp;
-+	int dtim_interval;
-+	int i;
-+
-+	if (mac_is_zero(bssid))
-+		return;
-+
-+	FN_ENTER;
-+
-+	dtim_interval =	(ACX_MODE_0_ADHOC == adev->mode) ?
-+			1 : adev->dtim_interval;
-+
-+	memset(&tmp, 0, sizeof(tmp));
-+
-+	for (i = 0; i < ETH_ALEN; i++) {
-+		tmp.bssid[i] = bssid[ETH_ALEN-1 - i];
-+	}
-+
-+	tmp.beacon_interval = cpu_to_le16(adev->beacon_interval);
-+
-+	/* Basic rate set. Control frame responses (such as ACK or CTS frames)
-+	** are sent with one of these rates */
-+	if (IS_ACX111(adev)) {
-+		/* It was experimentally determined that rates_basic
-+		** can take 11g rates as well, not only rates
-+		** defined with JOINBSS_RATES_BASIC111_nnn.
-+		** Just use RATE111_nnn constants... */
-+		tmp.u.acx111.dtim_interval = dtim_interval;
-+		tmp.u.acx111.rates_basic = cpu_to_le16(adev->rate_basic);
-+		log(L_ASSOC, "rates_basic:%04X, rates_supported:%04X\n",
-+			adev->rate_basic, adev->rate_oper);
-+	} else {
-+		tmp.u.acx100.dtim_interval = dtim_interval;
-+		tmp.u.acx100.rates_basic = rate111to5bits(adev->rate_basic);
-+		tmp.u.acx100.rates_supported = rate111to5bits(adev->rate_oper);
-+		log(L_ASSOC, "rates_basic:%04X->%02X, "
-+			"rates_supported:%04X->%02X\n",
-+			adev->rate_basic, tmp.u.acx100.rates_basic,
-+			adev->rate_oper, tmp.u.acx100.rates_supported);
-+	}
-+
-+	/* Setting up how Beacon, Probe Response, RTS, and PS-Poll frames
-+	** will be sent (rate/modulation/preamble) */
-+	tmp.u.txrate.genfrm_txrate = bitpos2genframe_txrate[lowest_bit(adev->rate_basic)];
-+	tmp.genfrm_mod_pre = 0; /* FIXME: was = adev->capab_short (which was always 0); */
-+	/* we can use short pre *if* all peers can understand it */
-+	/* FIXME #2: we need to correctly set PBCC/OFDM bits here too */
-+
-+	/* we switch fw to STA mode in MONITOR mode, it seems to be
-+	** the only mode where fw does not emit beacons by itself
-+	** but allows us to send anything (we really want to retain
-+	** ability to tx arbitrary frames in MONITOR mode)
-+	*/
-+	tmp.macmode = (adev->mode != ACX_MODE_MONITOR ? adev->mode : ACX_MODE_2_STA);
-+	tmp.channel = adev->channel;
-+	tmp.essid_len = adev->essid_len;
-+	/* NOTE: the code memcpy'd essid_len + 1 before, which is WRONG! */
-+	memcpy(tmp.essid, adev->essid, tmp.essid_len);
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_JOIN, &tmp, tmp.essid_len + 0x11);
-+
-+	log(L_ASSOC|L_DEBUG, "BSS_Type = %u\n", tmp.macmode);
-+	acxlog_mac(L_ASSOC|L_DEBUG, "JoinBSSID MAC:", adev->bssid, "\n");
-+
-+	acx_update_capabilities(adev);
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_cmd_start_scan
-+**
-+** Issue scan command to the hardware
-+**
-+** unified function for both ACX111 and ACX100
-+*/
-+static void
-+acx_s_scan_chan(acx_device_t *adev)
-+{
-+	union {
-+		acx111_scan_t acx111;
-+		acx100_scan_t acx100;
-+	} s;
-+
-+	FN_ENTER;
-+
-+	memset(&s, 0, sizeof(s));
-+
-+	/* first common positions... */
-+
-+	s.acx111.count = cpu_to_le16(adev->scan_count);
-+	s.acx111.rate = adev->scan_rate;
-+	s.acx111.options = adev->scan_mode;
-+	s.acx111.chan_duration = cpu_to_le16(adev->scan_duration);
-+	s.acx111.max_probe_delay = cpu_to_le16(adev->scan_probe_delay);
-+
-+	/* ...then differences */
-+
-+	if (IS_ACX111(adev)) {
-+		s.acx111.channel_list_select = 0; /* scan every allowed channel */
-+		/*s.acx111.channel_list_select = 1;*/ /* scan given channels */
-+		/*s.acx111.modulation = 0x40;*/ /* long preamble? OFDM? -> only for active scan */
-+		s.acx111.modulation = 0;
-+		/*s.acx111.channel_list[0] = 6;
-+		s.acx111.channel_list[1] = 4;*/
-+	} else {
-+		s.acx100.start_chan = cpu_to_le16(1);
-+		s.acx100.flags = cpu_to_le16(0x8000);
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SCAN, &s, sizeof(s));
-+	FN_EXIT0;
-+}
-+
-+
-+void
-+acx_s_cmd_start_scan(acx_device_t *adev)
-+{
-+	/* time_before check is 'just in case' thing */
-+	if (!(adev->irq_status & HOST_INT_SCAN_COMPLETE)
-+	 && time_before(jiffies, adev->scan_start + 10*HZ)
-+	) {
-+		log(L_INIT, "start_scan: seems like previous scan "
-+		"is still running. Not starting anew. Please report\n");
-+		return;
-+	}
-+
-+	log(L_INIT, "starting radio scan\n");
-+	/* remember that fw is commanded to do scan */
-+	adev->scan_start = jiffies;
-+	CLEAR_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+	/* issue it */
-+	acx_s_scan_chan(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acx111 feature config
-+*/
-+static int
-+acx111_s_get_feature_config(acx_device_t *adev,
-+		u32 *feature_options, u32 *data_flow_options)
-+{
-+	struct acx111_ie_feature_config feat;
-+
-+	if (!IS_ACX111(adev)) {
-+		return NOT_OK;
-+	}
-+
-+	memset(&feat, 0, sizeof(feat));
-+
-+	if (OK != acx_s_interrogate(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) {
-+		return NOT_OK;
-+	}
-+	log(L_DEBUG,
-+		"got Feature option:0x%X, DataFlow option: 0x%X\n",
-+		feat.feature_options,
-+		feat.data_flow_options);
-+
-+	if (feature_options)
-+		*feature_options = le32_to_cpu(feat.feature_options);
-+	if (data_flow_options)
-+		*data_flow_options = le32_to_cpu(feat.data_flow_options);
-+
-+	return OK;
-+}
-+
-+static int
-+acx111_s_set_feature_config(acx_device_t *adev,
-+	u32 feature_options, u32 data_flow_options,
-+	unsigned int mode /* 0 == remove, 1 == add, 2 == set */)
-+{
-+	struct acx111_ie_feature_config feat;
-+
-+	if (!IS_ACX111(adev)) {
-+		return NOT_OK;
-+	}
-+
-+	if ((mode < 0) || (mode > 2))
-+		return NOT_OK;
-+
-+	if (mode != 2)
-+		/* need to modify old data */
-+		acx111_s_get_feature_config(adev, &feat.feature_options, &feat.data_flow_options);
-+	else {
-+		/* need to set a completely new value */
-+		feat.feature_options = 0;
-+		feat.data_flow_options = 0;
-+	}
-+
-+	if (mode == 0) { /* remove */
-+		CLEAR_BIT(feat.feature_options, cpu_to_le32(feature_options));
-+		CLEAR_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options));
-+	} else { /* add or set */
-+		SET_BIT(feat.feature_options, cpu_to_le32(feature_options));
-+		SET_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options));
-+	}
-+
-+	log(L_DEBUG,
-+		"old: feature 0x%08X dataflow 0x%08X. mode: %u\n"
-+		"new: feature 0x%08X dataflow 0x%08X\n",
-+		feature_options, data_flow_options, mode,
-+		le32_to_cpu(feat.feature_options),
-+		le32_to_cpu(feat.data_flow_options));
-+
-+	if (OK != acx_s_configure(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) {
-+		return NOT_OK;
-+	}
-+
-+	return OK;
-+}
-+
-+static inline int
-+acx111_s_feature_off(acx_device_t *adev, u32 f, u32 d)
-+{
-+	return acx111_s_set_feature_config(adev, f, d, 0);
-+}
-+static inline int
-+acx111_s_feature_on(acx_device_t *adev, u32 f, u32 d)
-+{
-+	return acx111_s_set_feature_config(adev, f, d, 1);
-+}
-+static inline int
-+acx111_s_feature_set(acx_device_t *adev, u32 f, u32 d)
-+{
-+	return acx111_s_set_feature_config(adev, f, d, 2);
-+}
-+
-+
-+/***********************************************************************
-+** acx100_s_init_memory_pools
-+*/
-+static int
-+acx100_s_init_memory_pools(acx_device_t *adev, const acx_ie_memmap_t *mmt)
-+{
-+	acx100_ie_memblocksize_t MemoryBlockSize;
-+	acx100_ie_memconfigoption_t MemoryConfigOption;
-+	int TotalMemoryBlocks;
-+	int RxBlockNum;
-+	int TotalRxBlockSize;
-+	int TxBlockNum;
-+	int TotalTxBlockSize;
-+
-+	FN_ENTER;
-+
-+	/* Let's see if we can follow this:
-+	   first we select our memory block size (which I think is
-+	   completely arbitrary) */
-+	MemoryBlockSize.size = cpu_to_le16(adev->memblocksize);
-+
-+	/* Then we alert the card to our decision of block size */
-+	if (OK != acx_s_configure(adev, &MemoryBlockSize, ACX100_IE_BLOCK_SIZE)) {
-+		goto bad;
-+	}
-+
-+	/* We figure out how many total blocks we can create, using
-+	   the block size we chose, and the beginning and ending
-+	   memory pointers, i.e.: end-start/size */
-+	TotalMemoryBlocks = (le32_to_cpu(mmt->PoolEnd) - le32_to_cpu(mmt->PoolStart)) / adev->memblocksize;
-+
-+	log(L_DEBUG, "TotalMemoryBlocks=%u (%u bytes)\n",
-+		TotalMemoryBlocks, TotalMemoryBlocks*adev->memblocksize);
-+
-+	/* MemoryConfigOption.DMA_config bitmask:
-+			access to ACX memory is to be done:
-+	0x00080000	using PCI conf space?!
-+	0x00040000	using IO instructions?
-+	0x00000000	using memory access instructions
-+	0x00020000	using local memory block linked list (else what?)
-+	0x00010000	using host indirect descriptors (else host must access ACX memory?)
-+	*/
-+#if defined (ACX_MEM)
-+	        /*
-+	         * ACX ignores DMA_config for generic slave mode.
-+		 */
-+	        MemoryConfigOption.DMA_config = 0;
-+		/* Declare start of the Rx host pool */
-+		MemoryConfigOption.pRxHostDesc = cpu2acx(0);
-+		log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n",
-+				acx2cpu(MemoryConfigOption.pRxHostDesc),
-+				(long)adev->rxhostdesc_startphy);
-+#else
-+	if (IS_PCI(adev)) {
-+		MemoryConfigOption.DMA_config = cpu_to_le32(0x30000);
-+		/* Declare start of the Rx host pool */
-+		MemoryConfigOption.pRxHostDesc = cpu2acx(adev->rxhostdesc_startphy);
-+		log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n",
-+				acx2cpu(MemoryConfigOption.pRxHostDesc),
-+				(long)adev->rxhostdesc_startphy);
-+	} else {
-+		MemoryConfigOption.DMA_config = cpu_to_le32(0x20000);
-+	}
-+#endif
-+
-+	/* 50% of the allotment of memory blocks go to tx descriptors */
-+	TxBlockNum = TotalMemoryBlocks / 2;
-+	MemoryConfigOption.TxBlockNum = cpu_to_le16(TxBlockNum);
-+
-+	/* and 50% go to the rx descriptors */
-+	RxBlockNum = TotalMemoryBlocks - TxBlockNum;
-+	MemoryConfigOption.RxBlockNum = cpu_to_le16(RxBlockNum);
-+
-+	/* size of the tx and rx descriptor queues */
-+	TotalTxBlockSize = TxBlockNum * adev->memblocksize;
-+	TotalRxBlockSize = RxBlockNum * adev->memblocksize;
-+	log(L_DEBUG, "TxBlockNum %u RxBlockNum %u TotalTxBlockSize %u "
-+		"TotalTxBlockSize %u\n", TxBlockNum, RxBlockNum,
-+		TotalTxBlockSize, TotalRxBlockSize);
-+
-+
-+	/* align the tx descriptor queue to an alignment of 0x20 (32 bytes) */
-+	MemoryConfigOption.rx_mem =
-+		cpu_to_le32((le32_to_cpu(mmt->PoolStart) + 0x1f) & ~0x1f);
-+
-+	/* align the rx descriptor queue to units of 0x20
-+	 * and offset it by the tx descriptor queue */
-+	MemoryConfigOption.tx_mem =
-+		cpu_to_le32((le32_to_cpu(mmt->PoolStart) + TotalRxBlockSize + 0x1f) & ~0x1f);
-+	log(L_DEBUG, "rx_mem %08X rx_mem %08X\n",
-+		MemoryConfigOption.tx_mem, MemoryConfigOption.rx_mem);
-+
-+	/* alert the device to our decision */
-+	if (OK != acx_s_configure(adev, &MemoryConfigOption, ACX1xx_IE_MEMORY_CONFIG_OPTIONS)) {
-+		goto bad;
-+	}
-+
-+	/* and tell the device to kick it into gear */
-+	if (OK != acx_s_issue_cmd(adev, ACX100_CMD_INIT_MEMORY, NULL, 0)) {
-+		goto bad;
-+	}
-+#ifdef ACX_MEM
-+	/*
-+	 * slave memory interface has to manage the transmit pools for the ACX,
-+	 * so it needs to know what we chose here.
-+	 */
-+	adev->acx_txbuf_start = MemoryConfigOption.tx_mem;
-+	adev->acx_txbuf_numblocks = MemoryConfigOption.TxBlockNum;
-+#endif
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx100_s_create_dma_regions
-+**
-+** Note that this fn messes up heavily with hardware, but we cannot
-+** lock it (we need to sleep). Not a problem since IRQs can't happen
-+*/
-+static int
-+acx100_s_create_dma_regions(acx_device_t *adev)
-+{
-+	acx100_ie_queueconfig_t queueconf;
-+	acx_ie_memmap_t memmap;
-+	int res = NOT_OK;
-+	u32 tx_queue_start, rx_queue_start;
-+
-+	FN_ENTER;
-+
-+	/* read out the acx100 physical start address for the queues */
-+	if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	tx_queue_start = le32_to_cpu(memmap.QueueStart);
-+	rx_queue_start = tx_queue_start + TX_CNT * sizeof(txdesc_t);
-+
-+	log(L_DEBUG, "initializing Queue Indicator\n");
-+
-+	memset(&queueconf, 0, sizeof(queueconf));
-+
-+	/* Not needed for PCI or slave memory, so we can avoid setting them altogether */
-+	if (IS_USB(adev)) {
-+		queueconf.NumTxDesc = USB_TX_CNT;
-+		queueconf.NumRxDesc = USB_RX_CNT;
-+	}
-+
-+	/* calculate size of queues */
-+	queueconf.AreaSize = cpu_to_le32(
-+			TX_CNT * sizeof(txdesc_t) +
-+			RX_CNT * sizeof(rxdesc_t) + 8
-+			);
-+	queueconf.NumTxQueues = 1;  /* number of tx queues */
-+	/* sets the beginning of the tx descriptor queue */
-+	queueconf.TxQueueStart = memmap.QueueStart;
-+	/* done by memset: queueconf.TxQueuePri = 0; */
-+	queueconf.RxQueueStart = cpu_to_le32(rx_queue_start);
-+	queueconf.QueueOptions = 1;		/* auto reset descriptor */
-+	/* sets the end of the rx descriptor queue */
-+	queueconf.QueueEnd = cpu_to_le32(
-+			rx_queue_start + RX_CNT * sizeof(rxdesc_t)
-+			);
-+	/* sets the beginning of the next queue */
-+	queueconf.HostQueueEnd = cpu_to_le32(le32_to_cpu(queueconf.QueueEnd) + 8);
-+	if (OK != acx_s_configure(adev, &queueconf, ACX1xx_IE_QUEUE_CONFIG)) {
-+		goto fail;
-+	}
-+
-+#if defined (ACX_MEM)
-+	/* sets the beginning of the rx descriptor queue, after the tx descrs */
-+		adev->acx_queue_indicator =
-+		  (queueindicator_t *) le32_to_cpu (queueconf.QueueEnd);
-+		if (OK != acxmem_s_create_hostdesc_queues(adev))
-+			goto fail;
-+
-+		acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start);
-+#else
-+	if (IS_PCI(adev)) {
-+	/* sets the beginning of the rx descriptor queue, after the tx descrs */
-+		if (OK != acxpci_s_create_hostdesc_queues(adev))
-+			goto fail;
-+		acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start);
-+	}
-+#endif
-+
-+	if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	/*
-+	 * Have to make sure we skip past the Queue Indicator (QueueEnd) and Host Queue Indicator
-+	 * maps, each of which are 8 bytes and follow immediately after the transmit and
-+	 * receive queues.
-+	 */
-+	memmap.PoolStart = cpu_to_le32(
-+			(le32_to_cpu(memmap.QueueEnd) + 4 + 0x1f) & ~0x1f
-+			);
-+
-+	if (OK != acx_s_configure(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	if (OK != acx100_s_init_memory_pools(adev, &memmap)) {
-+		goto fail;
-+	}
-+
-+	res = OK;
-+	goto end;
-+
-+fail:
-+	acx_s_msleep(1000); /* ? */
-+#if defined (ACX_MEM)
-+		acxmem_free_desc_queues(adev);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_free_desc_queues(adev);
-+#endif
-+end:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acx111_s_create_dma_regions
-+**
-+** Note that this fn messes heavily with hardware, but we cannot
-+** lock it (we need to sleep). Not a problem since IRQs can't happen
-+*/
-+#define ACX111_PERCENT(percent) ((percent)/5)
-+
-+static int
-+acx111_s_create_dma_regions(acx_device_t *adev)
-+{
-+	struct acx111_ie_memoryconfig memconf;
-+	struct acx111_ie_queueconfig queueconf;
-+	u32 tx_queue_start, rx_queue_start;
-+
-+	FN_ENTER;
-+
-+	/* Calculate memory positions and queue sizes */
-+
-+	/* Set up our host descriptor pool + data pool */
-+#if defined (ACX_MEM)
-+		if (OK != acxmem_s_create_hostdesc_queues(adev))
-+			goto fail;
-+#else
-+	if (IS_PCI(adev)) {
-+		if (OK != acxpci_s_create_hostdesc_queues(adev))
-+			goto fail;
-+	}
-+#endif
-+
-+	memset(&memconf, 0, sizeof(memconf));
-+	/* the number of STAs (STA contexts) to support
-+	** NB: was set to 1 and everything seemed to work nevertheless... */
-+	memconf.no_of_stations = cpu_to_le16(VEC_SIZE(adev->sta_list));
-+	/* specify the memory block size. Default is 256 */
-+	memconf.memory_block_size = cpu_to_le16(adev->memblocksize);
-+	/* let's use 50%/50% for tx/rx (specify percentage, units of 5%) */
-+	memconf.tx_rx_memory_block_allocation = ACX111_PERCENT(50);
-+	/* set the count of our queues
-+	** NB: struct acx111_ie_memoryconfig shall be modified
-+	** if we ever will switch to more than one rx and/or tx queue */
-+	memconf.count_rx_queues = 1;
-+	memconf.count_tx_queues = 1;
-+	/* 0 == Busmaster Indirect Memory Organization, which is what we want
-+	 * (using linked host descs with their allocated mem).
-+	 * 2 == Generic Bus Slave */
-+	/* done by memset: memconf.options = 0; */
-+	/* let's use 25% for fragmentations and 75% for frame transfers
-+	 * (specified in units of 5%) */
-+	memconf.fragmentation = ACX111_PERCENT(75);
-+	/* Rx descriptor queue config */
-+	memconf.rx_queue1_count_descs = RX_CNT;
-+	memconf.rx_queue1_type = 7; /* must be set to 7 */
-+	/* done by memset: memconf.rx_queue1_prio = 0; low prio */
-+#if defined (ACX_MEM)
-+		memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy);
-+#else
-+	if (IS_PCI(adev)) {
-+		memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy);
-+	}
-+#endif
-+	/* Tx descriptor queue config */
-+	memconf.tx_queue1_count_descs = TX_CNT;
-+	/* done by memset: memconf.tx_queue1_attributes = 0; lowest priority */
-+
-+	/* NB1: this looks wrong: (memconf,ACX1xx_IE_QUEUE_CONFIG),
-+	** (queueconf,ACX1xx_IE_MEMORY_CONFIG_OPTIONS) look swapped, eh?
-+	** But it is actually correct wrt IE numbers.
-+	** NB2: sizeof(memconf) == 28 == 0x1c but configure(ACX1xx_IE_QUEUE_CONFIG)
-+	** writes 0x20 bytes (because same IE for acx100 uses struct acx100_ie_queueconfig
-+	** which is 4 bytes larger. what a mess. TODO: clean it up) */
-+	if (OK != acx_s_configure(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG)) {
-+		goto fail;
-+	}
-+
-+	acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS);
-+
-+	tx_queue_start = le32_to_cpu(queueconf.tx1_queue_address);
-+	rx_queue_start = le32_to_cpu(queueconf.rx1_queue_address);
-+
-+	log(L_INIT, "dump queue head (from card):\n"
-+		       "len: %u\n"
-+		       "tx_memory_block_address: %X\n"
-+		       "rx_memory_block_address: %X\n"
-+		       "tx1_queue address: %X\n"
-+		       "rx1_queue address: %X\n",
-+				le16_to_cpu(queueconf.len),
-+				le32_to_cpu(queueconf.tx_memory_block_address),
-+				le32_to_cpu(queueconf.rx_memory_block_address),
-+				tx_queue_start,
-+				rx_queue_start);
-+
-+#if defined (ACX_MEM)
-+		acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start);
-+#endif
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+#if defined (ACX_MEM)
-+		acxmem_free_desc_queues(adev);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_free_desc_queues(adev);
-+#endif
-+
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static void
-+acx_s_initialize_rx_config(acx_device_t *adev)
-+{
-+	struct {
-+		u16	id;
-+		u16	len;
-+		u16	rx_cfg1;
-+		u16	rx_cfg2;
-+	} ACX_PACKED cfg;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_OFF:
-+		adev->rx_config_1 = (u16) (0
-+			/* | RX_CFG1_INCLUDE_RXBUF_HDR	*/
-+			/* | RX_CFG1_FILTER_SSID	*/
-+			/* | RX_CFG1_FILTER_BCAST	*/
-+			/* | RX_CFG1_RCV_MC_ADDR1	*/
-+			/* | RX_CFG1_RCV_MC_ADDR0	*/
-+			/* | RX_CFG1_FILTER_ALL_MULTI	*/
-+			/* | RX_CFG1_FILTER_BSSID	*/
-+			/* | RX_CFG1_FILTER_MAC		*/
-+			/* | RX_CFG1_RCV_PROMISCUOUS	*/
-+			/* | RX_CFG1_INCLUDE_FCS	*/
-+			/* | RX_CFG1_INCLUDE_PHY_HDR	*/
-+			);
-+		adev->rx_config_2 = (u16) (0
-+			/*| RX_CFG2_RCV_ASSOC_REQ	*/
-+			/*| RX_CFG2_RCV_AUTH_FRAMES	*/
-+			/*| RX_CFG2_RCV_BEACON_FRAMES	*/
-+			/*| RX_CFG2_RCV_CONTENTION_FREE	*/
-+			/*| RX_CFG2_RCV_CTRL_FRAMES	*/
-+			/*| RX_CFG2_RCV_DATA_FRAMES	*/
-+			/*| RX_CFG2_RCV_BROKEN_FRAMES	*/
-+			/*| RX_CFG2_RCV_MGMT_FRAMES	*/
-+			/*| RX_CFG2_RCV_PROBE_REQ	*/
-+			/*| RX_CFG2_RCV_PROBE_RESP	*/
-+			/*| RX_CFG2_RCV_ACK_FRAMES	*/
-+			/*| RX_CFG2_RCV_OTHER		*/
-+			);
-+		break;
-+	case ACX_MODE_MONITOR:
-+		adev->rx_config_1 = (u16) (0
-+			/* | RX_CFG1_INCLUDE_RXBUF_HDR	*/
-+			/* | RX_CFG1_FILTER_SSID	*/
-+			/* | RX_CFG1_FILTER_BCAST	*/
-+			/* | RX_CFG1_RCV_MC_ADDR1	*/
-+			/* | RX_CFG1_RCV_MC_ADDR0	*/
-+			/* | RX_CFG1_FILTER_ALL_MULTI	*/
-+			/* | RX_CFG1_FILTER_BSSID	*/
-+			/* | RX_CFG1_FILTER_MAC		*/
-+			| RX_CFG1_RCV_PROMISCUOUS
-+			/* | RX_CFG1_INCLUDE_FCS	*/
-+			/* | RX_CFG1_INCLUDE_PHY_HDR	*/
-+			);
-+		adev->rx_config_2 = (u16) (0
-+			| RX_CFG2_RCV_ASSOC_REQ
-+			| RX_CFG2_RCV_AUTH_FRAMES
-+			| RX_CFG2_RCV_BEACON_FRAMES
-+			| RX_CFG2_RCV_CONTENTION_FREE
-+			| RX_CFG2_RCV_CTRL_FRAMES
-+			| RX_CFG2_RCV_DATA_FRAMES
-+			| RX_CFG2_RCV_BROKEN_FRAMES
-+			| RX_CFG2_RCV_MGMT_FRAMES
-+			| RX_CFG2_RCV_PROBE_REQ
-+			| RX_CFG2_RCV_PROBE_RESP
-+			| RX_CFG2_RCV_ACK_FRAMES
-+			| RX_CFG2_RCV_OTHER
-+			);
-+		break;
-+	default:
-+		adev->rx_config_1 = (u16) (0
-+			/* | RX_CFG1_INCLUDE_RXBUF_HDR	*/
-+			/* | RX_CFG1_FILTER_SSID	*/
-+			/* | RX_CFG1_FILTER_BCAST	*/
-+			/* | RX_CFG1_RCV_MC_ADDR1	*/
-+			/* | RX_CFG1_RCV_MC_ADDR0	*/
-+			/* | RX_CFG1_FILTER_ALL_MULTI	*/
-+			/* | RX_CFG1_FILTER_BSSID	*/
-+			| RX_CFG1_FILTER_MAC
-+			/* | RX_CFG1_RCV_PROMISCUOUS	*/
-+			/* | RX_CFG1_INCLUDE_FCS	*/
-+			/* | RX_CFG1_INCLUDE_PHY_HDR	*/
-+			);
-+		adev->rx_config_2 = (u16) (0
-+			| RX_CFG2_RCV_ASSOC_REQ
-+			| RX_CFG2_RCV_AUTH_FRAMES
-+			| RX_CFG2_RCV_BEACON_FRAMES
-+			| RX_CFG2_RCV_CONTENTION_FREE
-+			| RX_CFG2_RCV_CTRL_FRAMES
-+			| RX_CFG2_RCV_DATA_FRAMES
-+			/*| RX_CFG2_RCV_BROKEN_FRAMES	*/
-+			| RX_CFG2_RCV_MGMT_FRAMES
-+			| RX_CFG2_RCV_PROBE_REQ
-+			| RX_CFG2_RCV_PROBE_RESP
-+			/*| RX_CFG2_RCV_ACK_FRAMES	*/
-+			| RX_CFG2_RCV_OTHER
-+			);
-+		break;
-+	}
-+	adev->rx_config_1 |= RX_CFG1_INCLUDE_RXBUF_HDR;
-+
-+	if ((adev->rx_config_1 & RX_CFG1_INCLUDE_PHY_HDR)
-+	 || (adev->firmware_numver >= 0x02000000))
-+		adev->phy_header_len = IS_ACX111(adev) ? 8 : 4;
-+	else
-+		adev->phy_header_len = 0;
-+
-+	log(L_INIT, "setting RXconfig to %04X:%04X\n",
-+			adev->rx_config_1, adev->rx_config_2);
-+	cfg.rx_cfg1 = cpu_to_le16(adev->rx_config_1);
-+	cfg.rx_cfg2 = cpu_to_le16(adev->rx_config_2);
-+	acx_s_configure(adev, &cfg, ACX1xx_IE_RXCONFIG);
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_set_defaults
-+*/
-+void
-+acx_s_set_defaults(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	/* do it before getting settings, prevent bogus channel 0 warning */
-+	adev->channel = 1;
-+
-+	/* query some settings from the card.
-+	 * NOTE: for some settings, e.g. CCA and ED (ACX100!), an initial
-+	 * query is REQUIRED, otherwise the card won't work correctly! */
-+	adev->get_mask = GETSET_ANTENNA|GETSET_SENSITIVITY|GETSET_STATION_ID|GETSET_REG_DOMAIN;
-+	/* Only ACX100 supports ED and CCA */
-+	if (IS_ACX100(adev))
-+		adev->get_mask |= GETSET_CCA|GETSET_ED_THRESH;
-+
-+	acx_s_update_card_settings(adev);
-+
-+	acx_lock(adev, flags);
-+
-+	/* set our global interrupt mask */
-+#if defined (ACX_MEM)
-+		acxmem_set_interrupt_mask(adev);
-+#else
-+	if (IS_PCI(adev))
-+		acxpci_set_interrupt_mask(adev);
-+#endif
-+
-+	adev->led_power = 1; /* LED is active on startup */
-+	adev->brange_max_quality = 60; /* LED blink max quality is 60 */
-+	adev->brange_time_last_state_change = jiffies;
-+
-+	/* copy the MAC address we just got from the card
-+	 * into our MAC address used during current 802.11 session */
-+	MAC_COPY(adev->dev_addr, adev->ndev->dev_addr);
-+	MAC_BCAST(adev->ap);
-+
-+	adev->essid_len =
-+		snprintf(adev->essid, sizeof(adev->essid), "STA%02X%02X%02X",
-+			adev->dev_addr[3], adev->dev_addr[4], adev->dev_addr[5]);
-+	adev->essid_active = 1;
-+
-+	/* we have a nick field to waste, so why not abuse it
-+	 * to announce the driver version? ;-) */
-+	strncpy(adev->nick, "acx " ACX_RELEASE, IW_ESSID_MAX_SIZE);
-+
-+#if defined (ACX_MEM)
-+		adev->reg_dom_id = adev->cfgopt_domains.list[0];
-+#else
-+	if (IS_PCI(adev)) { /* FIXME: this should be made to apply to USB, too! */
-+		/* first regulatory domain entry in EEPROM == default reg. domain */
-+		adev->reg_dom_id = adev->cfgopt_domains.list[0];
-+	}
-+#endif
-+
-+	/* 0xffff would be better, but then we won't get a "scan complete"
-+	 * interrupt, so our current infrastructure will fail: */
-+	adev->scan_count = 1;
-+	adev->scan_mode = ACX_SCAN_OPT_ACTIVE;
-+	adev->scan_duration = 100;
-+	adev->scan_probe_delay = 200;
-+	/* reported to break scanning: adev->scan_probe_delay = adev->cfgopt_probe_delay; */
-+	adev->scan_rate = ACX_SCAN_RATE_1;
-+
-+	adev->mode = ACX_MODE_2_STA;
-+	adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM;
-+	adev->listen_interval = 100;
-+	adev->beacon_interval = DEFAULT_BEACON_INTERVAL;
-+	adev->dtim_interval = DEFAULT_DTIM_INTERVAL;
-+
-+	adev->msdu_lifetime = DEFAULT_MSDU_LIFETIME;
-+
-+	adev->rts_threshold = DEFAULT_RTS_THRESHOLD;
-+	adev->frag_threshold = 2346;
-+
-+	/* use standard default values for retry limits */
-+	adev->short_retry = 7; /* max. retries for (short) non-RTS packets */
-+	adev->long_retry = 4; /* max. retries for long (RTS) packets */
-+
-+	adev->preamble_mode = 2; /* auto */
-+	adev->fallback_threshold = 3;
-+	adev->stepup_threshold = 10;
-+	adev->rate_bcast = RATE111_1;
-+	adev->rate_bcast100 = RATE100_1;
-+	adev->rate_basic = RATE111_1 | RATE111_2;
-+	adev->rate_auto = 1;
-+	if (IS_ACX111(adev)) {
-+		adev->rate_oper = RATE111_ALL;
-+	} else {
-+		adev->rate_oper = RATE111_ACX100_COMPAT;
-+	}
-+
-+	/* Supported Rates element - the rates here are given in units of
-+	 * 500 kbit/s, plus 0x80 added. See 802.11-1999.pdf item 7.3.2.2 */
-+	acx_l_update_ratevector(adev);
-+
-+	/* set some more defaults */
-+	if (IS_ACX111(adev)) {
-+		/* 30mW (15dBm) is default, at least in my acx111 card: */
-+		adev->tx_level_dbm = 15;
-+	} else {
-+		/* don't use max. level, since it might be dangerous
-+		 * (e.g. WRT54G people experience
-+		 * excessive Tx power damage!) */
-+		adev->tx_level_dbm = 18;
-+		/*
-+		 * Lower power for the iPaq hx4700
-+		 */
-+		if (IS_MEM(adev)) {
-+			adev->tx_level_dbm = 14;
-+		}
-+	}
-+	/* adev->tx_level_auto = 1; */
-+	if (IS_ACX111(adev)) {
-+		/* start with sensitivity level 1 out of 3: */
-+		adev->sensitivity = 1;
-+	}
-+
-+/* #define ENABLE_POWER_SAVE */
-+#ifdef ENABLE_POWER_SAVE
-+	adev->ps_wakeup_cfg = PS_CFG_ENABLE | PS_CFG_WAKEUP_ALL_BEAC;
-+	adev->ps_listen_interval = 1;
-+	adev->ps_options = PS_OPT_ENA_ENHANCED_PS | PS_OPT_TX_PSPOLL | PS_OPT_STILL_RCV_BCASTS;
-+	adev->ps_hangover_period = 30;
-+	adev->ps_enhanced_transition_time = 0;
-+#else
-+	adev->ps_wakeup_cfg = 0;
-+	adev->ps_listen_interval = 0;
-+	adev->ps_options = 0;
-+	adev->ps_hangover_period = 0;
-+	adev->ps_enhanced_transition_time = 0;
-+#endif
-+
-+	/* These settings will be set in fw on ifup */
-+	adev->set_mask = 0
-+		| GETSET_RETRY
-+		| SET_MSDU_LIFETIME
-+	/* configure card to do rate fallback when in auto rate mode */
-+		| SET_RATE_FALLBACK
-+		| SET_RXCONFIG
-+		| GETSET_TXPOWER
-+	/* better re-init the antenna value we got above */
-+		| GETSET_ANTENNA
-+#if POWER_SAVE_80211
-+		| GETSET_POWER_80211
-+#endif
-+		;
-+
-+	acx_unlock(adev, flags);
-+	acx_lock_unhold(); /* hold time 844814 CPU ticks @2GHz */
-+
-+	acx_s_initialize_rx_config(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** FIXME: this should be solved in a general way for all radio types
-+** by decoding the radio firmware module,
-+** since it probably has some standard structure describing how to
-+** set the power level of the radio module which it controls.
-+** Or maybe not, since the radio module probably has a function interface
-+** instead which then manages Tx level programming :-\
-+*/
-+static int
-+acx111_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	struct acx111_ie_tx_level tx_level;
-+
-+	/* my acx111 card has two power levels in its configoptions (== EEPROM):
-+	 * 1 (30mW) [15dBm]
-+	 * 2 (10mW) [10dBm]
-+	 * For now, just assume all other acx111 cards have the same.
-+	 * FIXME: Ideally we would query it here, but we first need a
-+	 * standard way to query individual configoptions easily.
-+	 * Well, now we have proper cfgopt txpower variables, but this still
-+	 * hasn't been done yet, since it also requires dBm <-> mW conversion here... */
-+	if (level_dbm <= 12) {
-+		tx_level.level = 2; /* 10 dBm */
-+		adev->tx_level_dbm = 10;
-+	} else {
-+		tx_level.level = 1; /* 15 dBm */
-+		adev->tx_level_dbm = 15;
-+	}
-+	if (level_dbm != adev->tx_level_dbm)
-+		log(L_INIT, "acx111 firmware has specific "
-+			"power levels only: adjusted %d dBm to %d dBm!\n",
-+			level_dbm, adev->tx_level_dbm);
-+
-+	return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL);
-+}
-+
-+static int
-+acx_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	if (IS_ACX111(adev)) {
-+		return acx111_s_set_tx_level(adev, level_dbm);
-+	}
-+#if defined (ACX_MEM)
-+		return acx100mem_s_set_tx_level(adev, level_dbm);
-+#else
-+	if (IS_PCI(adev)) {
-+		return acx100pci_s_set_tx_level(adev, level_dbm);
-+	}
-+#endif
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#ifdef UNUSED
-+/* Returns the current tx level (ACX111) */
-+static u8
-+acx111_s_get_tx_level(acx_device_t *adev)
-+{
-+	struct acx111_ie_tx_level tx_level;
-+
-+	tx_level.level = 0;
-+	acx_s_interrogate(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL);
-+	return tx_level.level;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_l_rxmonitor
-+** Called from IRQ context only
-+*/
-+static void
-+acx_l_rxmonitor(acx_device_t *adev, const rxbuffer_t *rxbuf)
-+{
-+	wlansniffrm_t *msg;
-+	struct sk_buff *skb;
-+	void *datap;
-+	unsigned int skb_len;
-+	int payload_offset;
-+
-+	FN_ENTER;
-+
-+	/* we are in big luck: the acx100 doesn't modify any of the fields */
-+	/* in the 802.11 frame. just pass this packet into the PF_PACKET */
-+	/* subsystem. yeah. */
-+	payload_offset = ((u8*)acx_get_wlan_hdr(adev, rxbuf) - (u8*)rxbuf);
-+	skb_len = RXBUF_BYTES_USED(rxbuf) - payload_offset;
-+
-+	/* sanity check */
-+	if (unlikely(skb_len > WLAN_A4FR_MAXLEN_WEP)) {
-+		printk("%s: monitor mode panic: oversized frame!\n",
-+				adev->ndev->name);
-+		goto end;
-+	}
-+
-+	if (adev->ndev->type == ARPHRD_IEEE80211_PRISM)
-+		skb_len += sizeof(*msg);
-+
-+	/* allocate skb */
-+	skb = dev_alloc_skb(skb_len);
-+	if (unlikely(!skb)) {
-+		printk("%s: no memory for skb (%u bytes)\n",
-+				adev->ndev->name, skb_len);
-+		goto end;
-+	}
-+
-+	skb_put(skb, skb_len);
-+
-+	if (adev->ndev->type == ARPHRD_IEEE80211) {
-+		/* when in raw 802.11 mode, just copy frame as-is */
-+		datap = skb->data;
-+	} else if (adev->ndev->type == ARPHRD_IEEE80211_PRISM) {
-+		/* emulate prism header */
-+		msg = (wlansniffrm_t*)skb->data;
-+		datap = msg + 1;
-+
-+		msg->msgcode = WLANSNIFFFRM;
-+		msg->msglen = sizeof(*msg);
-+		strncpy(msg->devname, adev->ndev->name, sizeof(msg->devname)-1);
-+		msg->devname[sizeof(msg->devname)-1] = '\0';
-+
-+		msg->hosttime.did = WLANSNIFFFRM_hosttime;
-+		msg->hosttime.status = WLANITEM_STATUS_data_ok;
-+		msg->hosttime.len = 4;
-+		msg->hosttime.data = jiffies;
-+
-+		msg->mactime.did = WLANSNIFFFRM_mactime;
-+		msg->mactime.status = WLANITEM_STATUS_data_ok;
-+		msg->mactime.len = 4;
-+		msg->mactime.data = rxbuf->time;
-+
-+		msg->channel.did = WLANSNIFFFRM_channel;
-+		msg->channel.status = WLANITEM_STATUS_data_ok;
-+		msg->channel.len = 4;
-+		msg->channel.data = adev->channel;
-+
-+		msg->rssi.did = WLANSNIFFFRM_rssi;
-+		msg->rssi.status = WLANITEM_STATUS_no_value;
-+		msg->rssi.len = 4;
-+		msg->rssi.data = 0;
-+
-+		msg->sq.did = WLANSNIFFFRM_sq;
-+		msg->sq.status = WLANITEM_STATUS_no_value;
-+		msg->sq.len = 4;
-+		msg->sq.data = 0;
-+
-+		msg->signal.did = WLANSNIFFFRM_signal;
-+		msg->signal.status = WLANITEM_STATUS_data_ok;
-+		msg->signal.len = 4;
-+		msg->signal.data = rxbuf->phy_snr;
-+
-+		msg->noise.did = WLANSNIFFFRM_noise;
-+		msg->noise.status = WLANITEM_STATUS_data_ok;
-+		msg->noise.len = 4;
-+		msg->noise.data = rxbuf->phy_level;
-+
-+		msg->rate.did = WLANSNIFFFRM_rate;
-+		msg->rate.status = WLANITEM_STATUS_data_ok;
-+		msg->rate.len = 4;
-+		msg->rate.data = rxbuf->phy_plcp_signal / 5;
-+
-+		msg->istx.did = WLANSNIFFFRM_istx;
-+		msg->istx.status = WLANITEM_STATUS_data_ok;
-+		msg->istx.len = 4;
-+		msg->istx.data = 0;	/* tx=0: it's not a tx packet */
-+
-+		skb_len -= sizeof(*msg);
-+
-+		msg->frmlen.did = WLANSNIFFFRM_signal;
-+		msg->frmlen.status = WLANITEM_STATUS_data_ok;
-+		msg->frmlen.len = 4;
-+		msg->frmlen.data = skb_len;
-+	} else {
-+		printk("acx: unsupported netdev type %d!\n", adev->ndev->type);
-+		dev_kfree_skb(skb);
-+		return;
-+	}
-+
-+	/* sanity check (keep it here) */
-+	if (unlikely((int)skb_len < 0)) {
-+		printk("acx: skb_len=%d. Driver bug, please report\n", (int)skb_len);
-+		dev_kfree_skb(skb);
-+		return;
-+	}
-+	memcpy(datap, ((unsigned char*)rxbuf)+payload_offset, skb_len);
-+
-+	skb->dev = adev->ndev;
-+	skb->dev->last_rx = jiffies;
-+
-+	skb_reset_mac_header(skb);
-+	skb->ip_summed = CHECKSUM_NONE;
-+	skb->pkt_type = PACKET_OTHERHOST;
-+	skb->protocol = htons(ETH_P_80211_RAW);
-+	netif_rx(skb);
-+
-+	adev->stats.rx_packets++;
-+	adev->stats.rx_bytes += skb->len;
-+
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_rx_ieee802_11_frame
-+**
-+** Called from IRQ context only
-+*/
-+
-+/* All these contortions are for saner dup logging
-+**
-+** We want: (a) to know about excessive dups
-+** (b) to not spam kernel log about occasional dups
-+**
-+** 1/64 threshold was chosen by running "ping -A"
-+** It gave "rx: 59 DUPs in 2878 packets" only with 4 parallel
-+** "ping -A" streams running. */
-+/* 2005-10-11: bumped up to 1/8
-+** subtract a $smallint from dup_count in order to
-+** avoid "2 DUPs in 19 packets" messages */
-+static inline int
-+acx_l_handle_dup(acx_device_t *adev, u16 seq)
-+{
-+	if (adev->dup_count) {
-+		adev->nondup_count++;
-+		if (time_after(jiffies, adev->dup_msg_expiry)) {
-+			/* Log only if more than 1 dup in 64 packets */
-+			if (adev->nondup_count/8 < adev->dup_count-5) {
-+				printk(KERN_INFO "%s: rx: %d DUPs in "
-+					"%d packets received in 10 secs\n",
-+					adev->ndev->name,
-+					adev->dup_count,
-+					adev->nondup_count);
-+			}
-+			adev->dup_count = 0;
-+			adev->nondup_count = 0;
-+		}
-+	}
-+	if (unlikely(seq == adev->last_seq_ctrl)) {
-+		if (!adev->dup_count++)
-+			adev->dup_msg_expiry = jiffies + 10*HZ;
-+		adev->stats.rx_errors++;
-+		return 1; /* a dup */
-+	}
-+	adev->last_seq_ctrl = seq;
-+	return 0;
-+}
-+
-+static int
-+acx_l_rx_ieee802_11_frame(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	unsigned int ftype, fstype;
-+	const wlan_hdr_t *hdr;
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	/* see IEEE 802.11-1999.pdf chapter 7 "MAC frame formats" */
-+	if (unlikely((hdr->fc & WF_FC_PVERi) != 0)) {
-+		printk_ratelimited(KERN_INFO "rx: unsupported 802.11 protocol\n");
-+		goto end;
-+	}
-+
-+	ftype = hdr->fc & WF_FC_FTYPEi;
-+	fstype = hdr->fc & WF_FC_FSTYPEi;
-+
-+	switch (ftype) {
-+	/* check data frames first, for speed */
-+	case WF_FTYPE_DATAi:
-+		switch (fstype) {
-+		case WF_FSTYPE_DATAONLYi:
-+			if (acx_l_handle_dup(adev, hdr->seq))
-+				break; /* a dup, simply discard it */
-+
-+			/* TODO:
-+			if (WF_FC_FROMTODSi == (hdr->fc & WF_FC_FROMTODSi)) {
-+				result = acx_l_process_data_frame_wds(adev, rxbuf);
-+				break;
-+			}
-+			*/
-+
-+			switch (adev->mode) {
-+			case ACX_MODE_3_AP:
-+				result = acx_l_process_data_frame_master(adev, rxbuf);
-+				break;
-+			case ACX_MODE_0_ADHOC:
-+			case ACX_MODE_2_STA:
-+				result = acx_l_process_data_frame_client(adev, rxbuf);
-+				break;
-+			}
-+		case WF_FSTYPE_DATA_CFACKi:
-+		case WF_FSTYPE_DATA_CFPOLLi:
-+		case WF_FSTYPE_DATA_CFACK_CFPOLLi:
-+		case WF_FSTYPE_CFPOLLi:
-+		case WF_FSTYPE_CFACK_CFPOLLi:
-+		/*   see above.
-+			acx_process_class_frame(adev, rxbuf, 3); */
-+			break;
-+		case WF_FSTYPE_NULLi:
-+			/* acx_l_process_NULL_frame(adev, rxbuf, 3); */
-+			break;
-+		/* FIXME: same here, see above */
-+		case WF_FSTYPE_CFACKi:
-+		default:
-+			break;
-+		}
-+		break;
-+	case WF_FTYPE_MGMTi:
-+		result = acx_l_process_mgmt_frame(adev, rxbuf);
-+		break;
-+	case WF_FTYPE_CTLi:
-+		if (fstype == WF_FSTYPE_PSPOLLi)
-+			result = OK;
-+		/*   this call is irrelevant, since
-+		 *   acx_process_class_frame is a stub, so return
-+		 *   immediately instead.
-+		 * return acx_process_class_frame(adev, rxbuf, 3); */
-+		break;
-+	default:
-+		break;
-+	}
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_rxbuf
-+**
-+** NB: used by USB code also
-+*/
-+void
-+acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	struct wlan_hdr *hdr;
-+	unsigned int qual;
-+	int buf_len;
-+	u16 fc;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+	fc = le16_to_cpu(hdr->fc);
-+	/* length of frame from control field to first byte of FCS */
-+	buf_len = RXBUF_BYTES_RCVD(adev, rxbuf);
-+
-+	if ( ((WF_FC_FSTYPE & fc) != WF_FSTYPE_BEACON)
-+	  || (acx_debug & L_XFER_BEACON)
-+	) {
-+		log(L_XFER|L_DATA, "rx: %s "
-+			"time:%u len:%u signal:%u SNR:%u macstat:%02X "
-+			"phystat:%02X phyrate:%u status:%u\n",
-+			acx_get_packet_type_string(fc),
-+			le32_to_cpu(rxbuf->time),
-+			buf_len,
-+			acx_signal_to_winlevel(rxbuf->phy_level),
-+			acx_signal_to_winlevel(rxbuf->phy_snr),
-+			rxbuf->mac_status,
-+			rxbuf->phy_stat_baseband,
-+			rxbuf->phy_plcp_signal,
-+			adev->status);
-+	}
-+
-+	if (unlikely(acx_debug & L_DATA)) {
-+		printk("rx: 802.11 buf[%u]: ", buf_len);
-+		acx_dump_bytes(hdr, buf_len);
-+	}
-+
-+	/* FIXME: should check for Rx errors (rxbuf->mac_status?
-+	 * discard broken packets - but NOT for monitor!)
-+	 * and update Rx packet statistics here */
-+
-+	if (unlikely(adev->mode == ACX_MODE_MONITOR)) {
-+		acx_l_rxmonitor(adev, rxbuf);
-+	} else if (likely(buf_len >= WLAN_HDR_A3_LEN)) {
-+		acx_l_rx_ieee802_11_frame(adev, rxbuf);
-+	} else {
-+		log(L_DEBUG|L_XFER|L_DATA,
-+		       "rx: NOT receiving packet (%s): "
-+		       "size too small (%u)\n",
-+		       acx_get_packet_type_string(fc),
-+		       buf_len);
-+	}
-+
-+	/* Now check Rx quality level, AFTER processing packet.
-+	 * I tried to figure out how to map these levels to dBm
-+	 * values, but for the life of me I really didn't
-+	 * manage to get it. Either these values are not meant to
-+	 * be expressed in dBm, or it's some pretty complicated
-+	 * calculation. */
-+
-+#ifdef FROM_SCAN_SOURCE_ONLY
-+	/* only consider packets originating from the MAC
-+	 * address of the device that's managing our BSSID.
-+	 * Disable it for now, since it removes information (levels
-+	 * from different peers) and slows the Rx path. */
-+	if (adev->ap_client
-+	 && mac_is_equal(hdr->a2, adev->ap_client->address)) {
-+#endif
-+		adev->wstats.qual.level = acx_signal_to_winlevel(rxbuf->phy_level);
-+		adev->wstats.qual.noise = acx_signal_to_winlevel(rxbuf->phy_snr);
-+#ifndef OLD_QUALITY
-+		qual = acx_signal_determine_quality(adev->wstats.qual.level,
-+				adev->wstats.qual.noise);
-+#else
-+		qual = (adev->wstats.qual.noise <= 100) ?
-+				100 - adev->wstats.qual.noise : 0;
-+#endif
-+		adev->wstats.qual.qual = qual;
-+		adev->wstats.qual.updated = 7; /* all 3 indicators updated */
-+#ifdef FROM_SCAN_SOURCE_ONLY
-+	}
-+#endif
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_handle_txrate_auto
-+**
-+** Theory of operation:
-+** client->rate_cap is a bitmask of rates client is capable of.
-+** client->rate_cfg is a bitmask of allowed (configured) rates.
-+** It is set as a result of iwconfig rate N [auto]
-+** or iwpriv set_rates "N,N,N N,N,N" commands.
-+** It can be fixed (e.g. 0x0080 == 18Mbit only),
-+** auto (0x00ff == 18Mbit or any lower value),
-+** and code handles any bitmask (0x1081 == try 54Mbit,18Mbit,1Mbit _only_).
-+**
-+** client->rate_cur is a value for rate111 field in tx descriptor.
-+** It is always set to txrate_cfg sans zero or more most significant
-+** bits. This routine handles selection of new rate_cur value depending on
-+** outcome of last tx event.
-+**
-+** client->rate_100 is a precalculated rate value for acx100
-+** (we can do without it, but will need to calculate it on each tx).
-+**
-+** You cannot configure mixed usage of 5.5 and/or 11Mbit rate
-+** with PBCC and CCK modulation. Either both at CCK or both at PBCC.
-+** In theory you can implement it, but so far it is considered not worth doing.
-+**
-+** 22Mbit, of course, is PBCC always. */
-+
-+/* maps acx100 tx descr rate field to acx111 one */
-+static u16
-+rate100to111(u8 r)
-+{
-+	switch (r) {
-+	case RATE100_1:	return RATE111_1;
-+	case RATE100_2:	return RATE111_2;
-+	case RATE100_5:
-+	case (RATE100_5 | RATE100_PBCC511):	return RATE111_5;
-+	case RATE100_11:
-+	case (RATE100_11 | RATE100_PBCC511):	return RATE111_11;
-+	case RATE100_22:	return RATE111_22;
-+	default:
-+		printk("acx: unexpected acx100 txrate: %u! "
-+			"Please report\n", r);
-+		return RATE111_1;
-+	}
-+}
-+
-+
-+void
-+acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc,
-+			u16 cur, u8 rate100, u16 rate111,
-+			u8 error, int pkts_to_ignore)
-+{
-+	u16 sent_rate;
-+	int slower_rate_was_used;
-+
-+	/* vda: hmm. current code will do this:
-+	** 1. send packets at 11 Mbit, stepup++
-+	** 2. will try to send at 22Mbit. hardware will see no ACK,
-+	**    retries at 11Mbit, success. code notes that used rate
-+	**    is lower. stepup = 0, fallback++
-+	** 3. repeat step 2 fallback_count times. Fall back to
-+	**    11Mbit. go to step 1.
-+	** If stepup_count is large (say, 16) and fallback_count
-+	** is small (3), this wouldn't be too bad wrt throughput */
-+
-+	if (unlikely(!cur)) {
-+		printk("acx: BUG! ratemask is empty\n");
-+		return; /* or else we may lock up the box */
-+	}
-+
-+	/* do some preparations, i.e. calculate the one rate that was
-+	 * used to send this packet */
-+	if (IS_ACX111(adev)) {
-+		sent_rate = 1 << highest_bit(rate111 & RATE111_ALL);
-+	} else {
-+		sent_rate = rate100to111(rate100);
-+	}
-+	/* sent_rate has only one bit set now, corresponding to tx rate
-+	 * which was used by hardware to tx this particular packet */
-+
-+	/* now do the actual auto rate management */
-+	log(L_XFER, "tx: %sclient=%p/"MACSTR" used=%04X cur=%04X cfg=%04X "
-+		"__=%u/%u ^^=%u/%u\n",
-+		(txc->ignore_count > 0) ? "[IGN] " : "",
-+		txc, MAC(txc->address), sent_rate, cur, txc->rate_cfg,
-+		txc->fallback_count, adev->fallback_threshold,
-+		txc->stepup_count, adev->stepup_threshold
-+	);
-+
-+	/* we need to ignore old packets already in the tx queue since
-+	 * they use older rate bytes configured before our last rate change,
-+	 * otherwise our mechanism will get confused by interpreting old data.
-+	 * Do it after logging above */
-+	if (txc->ignore_count) {
-+		txc->ignore_count--;
-+		return;
-+	}
-+
-+	/* true only if the only nonzero bit in sent_rate is
-+	** less significant than highest nonzero bit in cur */
-+	slower_rate_was_used = ( cur > ((sent_rate<<1)-1) );
-+
-+	if (slower_rate_was_used || error) {
-+		txc->stepup_count = 0;
-+		if (++txc->fallback_count <= adev->fallback_threshold)
-+			return;
-+		txc->fallback_count = 0;
-+
-+		/* clear highest 1 bit in cur */
-+		sent_rate = RATE111_54;
-+		while (!(cur & sent_rate)) sent_rate >>= 1;
-+		CLEAR_BIT(cur, sent_rate);
-+		if (!cur) /* we can't disable all rates! */
-+			cur = sent_rate;
-+		log(L_XFER, "tx: falling back to ratemask %04X\n", cur);
-+
-+	} else { /* there was neither lower rate nor error */
-+		txc->fallback_count = 0;
-+		if (++txc->stepup_count <= adev->stepup_threshold)
-+			return;
-+		txc->stepup_count = 0;
-+
-+		/* Sanitize. Sort of not needed, but I dont trust hw that much...
-+		** what if it can report bogus tx rates sometimes? */
-+		while (!(cur & sent_rate)) sent_rate >>= 1;
-+
-+		/* try to find a higher sent_rate that isn't yet in our
-+		 * current set, but is an allowed cfg */
-+		while (1) {
-+			sent_rate <<= 1;
-+			if (sent_rate > txc->rate_cfg)
-+				/* no higher rates allowed by config */
-+				return;
-+			if (!(cur & sent_rate) && (txc->rate_cfg & sent_rate))
-+				/* found */
-+				break;
-+			/* not found, try higher one */
-+		}
-+		SET_BIT(cur, sent_rate);
-+		log(L_XFER, "tx: stepping up to ratemask %04X\n", cur);
-+	}
-+
-+	txc->rate_cur = cur;
-+	txc->ignore_count = pkts_to_ignore;
-+	/* calculate acx100 style rate byte if needed */
-+	if (IS_ACX100(adev)) {
-+		txc->rate_100 = acx_bitpos2rate100[highest_bit(cur)];
-+	}
-+}
-+
-+
-+/***********************************************************************
-+** acx_i_start_xmit
-+**
-+** Called by network core. Can be called outside of process context.
-+*/
-+int
-+acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	tx_t *tx;
-+	void *txbuf;
-+	unsigned long flags;
-+	int txresult = NOT_OK;
-+	int len;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!skb)) {
-+		/* indicate success */
-+		txresult = OK;
-+		goto end_no_unlock;
-+	}
-+	if (unlikely(!adev)) {
-+		goto end_no_unlock;
-+	}
-+
-+	acx_lock(adev, flags);
-+
-+	if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) {
-+		goto end;
-+	}
-+	if (unlikely(adev->mode == ACX_MODE_OFF)) {
-+		goto end;
-+	}
-+	if (unlikely(acx_queue_stopped(ndev))) {
-+		log(L_DEBUG, "%s: called when queue stopped\n", __func__);
-+		goto end;
-+	}
-+	if (unlikely(ACX_STATUS_4_ASSOCIATED != adev->status)) {
-+		log(L_XFER, "trying to xmit, but not associated yet: "
-+			"aborting...\n");
-+		/* silently drop the packet, since we're not connected yet */
-+		txresult = OK;
-+		/* ...but indicate an error nevertheless */
-+		adev->stats.tx_errors++;
-+		goto end;
-+	}
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (unlikely(!tx)) {
-+#ifndef ACX_MEM
-+	  /*
-+	   * generic slave interface has to make do with the tiny amount, around
-+	   * 7k, of transmit buffer space on the ACX itself.  It is likely this will
-+	   * frequently be full.
-+	   */
-+		printk_ratelimited("%s: start_xmit: txdesc ring is full, "
-+			"dropping tx\n", ndev->name);
-+#endif
-+		txresult = NOT_OK;
-+		goto end;
-+	}
-+
-+	txbuf = acx_l_get_txbuf(adev, tx);
-+	if (unlikely(!txbuf)) {
-+		/* Card was removed */
-+		txresult = NOT_OK;
-+		acx_l_dealloc_tx(adev, tx);
-+		goto end;
-+	}
-+	len = acx_ether_to_txbuf(adev, txbuf, skb);
-+	if (unlikely(len < 0)) {
-+		/* Error in packet conversion */
-+		txresult = NOT_OK;
-+		acx_l_dealloc_tx(adev, tx);
-+		goto end;
-+	}
-+	acx_l_tx_data(adev, tx, len);
-+	ndev->trans_start = jiffies;
-+
-+	txresult = OK;
-+	adev->stats.tx_packets++;
-+	adev->stats.tx_bytes += skb->len;
-+
-+end:
-+	acx_unlock(adev, flags);
-+
-+end_no_unlock:
-+	if ((txresult == OK) && skb)
-+		dev_kfree_skb_any(skb);
-+
-+	FN_EXIT1(txresult);
-+	return txresult;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_update_ratevector
-+**
-+** Updates adev->rate_supported[_len] according to rate_{basic,oper}
-+*/
-+const u8
-+acx_bitpos2ratebyte[] = {
-+	DOT11RATEBYTE_1,
-+	DOT11RATEBYTE_2,
-+	DOT11RATEBYTE_5_5,
-+	DOT11RATEBYTE_6_G,
-+	DOT11RATEBYTE_9_G,
-+	DOT11RATEBYTE_11,
-+	DOT11RATEBYTE_12_G,
-+	DOT11RATEBYTE_18_G,
-+	DOT11RATEBYTE_22,
-+	DOT11RATEBYTE_24_G,
-+	DOT11RATEBYTE_36_G,
-+	DOT11RATEBYTE_48_G,
-+	DOT11RATEBYTE_54_G,
-+};
-+
-+void
-+acx_l_update_ratevector(acx_device_t *adev)
-+{
-+	u16 bcfg = adev->rate_basic;
-+	u16 ocfg = adev->rate_oper;
-+	u8 *supp = adev->rate_supported;
-+	const u8 *dot11 = acx_bitpos2ratebyte;
-+
-+	FN_ENTER;
-+
-+	while (ocfg) {
-+		if (ocfg & 1) {
-+			*supp = *dot11;
-+			if (bcfg & 1) {
-+				*supp |= 0x80;
-+			}
-+			supp++;
-+		}
-+		dot11++;
-+		ocfg >>= 1;
-+		bcfg >>= 1;
-+	}
-+	adev->rate_supported_len = supp - adev->rate_supported;
-+	if (acx_debug & L_ASSOC) {
-+		printk("new ratevector: ");
-+		acx_dump_bytes(adev->rate_supported, adev->rate_supported_len);
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_init
-+*/
-+static void
-+acx_l_sta_list_init(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+	memset(adev->sta_hash_tab, 0, sizeof(adev->sta_hash_tab));
-+	memset(adev->sta_list, 0, sizeof(adev->sta_list));
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_get_from_hash
-+*/
-+static inline client_t*
-+acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address)
-+{
-+	return adev->sta_hash_tab[address[5] % VEC_SIZE(adev->sta_hash_tab)];
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_get
-+*/
-+client_t*
-+acx_l_sta_list_get(acx_device_t *adev, const u8 *address)
-+{
-+	client_t *client;
-+	FN_ENTER;
-+	client = acx_l_sta_list_get_from_hash(adev, address);
-+	while (client) {
-+		if (mac_is_equal(address, client->address)) {
-+			client->mtime = jiffies;
-+			break;
-+		}
-+		client = client->next;
-+	}
-+	FN_EXIT0;
-+	return client;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_del
-+*/
-+void
-+acx_l_sta_list_del(acx_device_t *adev, client_t *victim)
-+{
-+	client_t *client, *next;
-+
-+	client = acx_l_sta_list_get_from_hash(adev, victim->address);
-+	next = client;
-+	/* tricky. next = client on first iteration only,
-+	** on all other iters next = client->next */
-+	while (next) {
-+		if (next == victim) {
-+			client->next = victim->next;
-+			/* Overkill */
-+			memset(victim, 0, sizeof(*victim));
-+			break;
-+		}
-+		client = next;
-+		next = client->next;
-+	}
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_alloc
-+**
-+** Never fails - will evict oldest client if needed
-+*/
-+static client_t*
-+acx_l_sta_list_alloc(acx_device_t *adev)
-+{
-+	int i;
-+	unsigned long age, oldest_age;
-+	client_t *client, *oldest;
-+
-+	FN_ENTER;
-+
-+	oldest = &adev->sta_list[0];
-+	oldest_age = 0;
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		client = &adev->sta_list[i];
-+
-+		if (!client->used) {
-+			goto found;
-+		} else {
-+			age = jiffies - client->mtime;
-+			if (oldest_age < age) {
-+				oldest_age = age;
-+				oldest = client;
-+			}
-+		}
-+	}
-+	acx_l_sta_list_del(adev, oldest);
-+	client = oldest;
-+found:
-+	memset(client, 0, sizeof(*client));
-+	FN_EXIT0;
-+	return client;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_add
-+**
-+** Never fails - will evict oldest client if needed
-+*/
-+/* In case we will reimplement it differently... */
-+#define STA_LIST_ADD_CAN_FAIL 0
-+
-+static client_t*
-+acx_l_sta_list_add(acx_device_t *adev, const u8 *address)
-+{
-+	client_t *client;
-+	int index;
-+
-+	FN_ENTER;
-+
-+	client = acx_l_sta_list_alloc(adev);
-+
-+	client->mtime = jiffies;
-+	MAC_COPY(client->address, address);
-+	client->used = CLIENT_EXIST_1;
-+	client->auth_alg = WLAN_AUTH_ALG_SHAREDKEY;
-+	client->auth_step = 1;
-+	/* give some tentative peer rate values
-+	** (needed because peer may do auth without probing us first,
-+	** thus we'll have no idea of peer's ratevector yet).
-+	** Will be overwritten by scanning or assoc code */
-+	client->rate_cap = adev->rate_basic;
-+	client->rate_cfg = adev->rate_basic;
-+	client->rate_cur = 1 << lowest_bit(adev->rate_basic);
-+
-+	index = address[5] % VEC_SIZE(adev->sta_hash_tab);
-+	client->next = adev->sta_hash_tab[index];
-+	adev->sta_hash_tab[index] = client;
-+
-+	acxlog_mac(L_ASSOC, "sta_list_add: sta=", address, "\n");
-+
-+	FN_EXIT0;
-+	return client;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_sta_list_get_or_add
-+**
-+** Never fails - will evict oldest client if needed
-+*/
-+static client_t*
-+acx_l_sta_list_get_or_add(acx_device_t *adev, const u8 *address)
-+{
-+	client_t *client = acx_l_sta_list_get(adev, address);
-+	if (!client)
-+		client = acx_l_sta_list_add(adev, address);
-+	return client;
-+}
-+
-+
-+/***********************************************************************
-+** acx_set_status
-+**
-+** This function is called in many atomic regions, must not sleep
-+**
-+** This function does not need locking UNLESS you call it
-+** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can
-+** wake queue. This can race with stop_queue elsewhere.
-+** See acx_stop_queue comment. */
-+void
-+acx_set_status(acx_device_t *adev, u16 new_status)
-+{
-+#define QUEUE_OPEN_AFTER_ASSOC 1 /* this really seems to be needed now */
-+	u16 old_status = adev->status;
-+
-+	FN_ENTER;
-+
-+	log(L_ASSOC, "%s(%d):%s\n",
-+	       __func__, new_status, acx_get_status_name(new_status));
-+
-+	/* wireless_send_event never sleeps */
-+	if (ACX_STATUS_4_ASSOCIATED == new_status) {
-+		union iwreq_data wrqu;
-+
-+		wrqu.data.length = 0;
-+		wrqu.data.flags = 0;
-+		wireless_send_event(adev->ndev, SIOCGIWSCAN, &wrqu, NULL);
-+
-+		wrqu.data.length = 0;
-+		wrqu.data.flags = 0;
-+		MAC_COPY(wrqu.ap_addr.sa_data, adev->bssid);
-+		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-+		wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL);
-+	} else {
-+		union iwreq_data wrqu;
-+
-+		/* send event with empty BSSID to indicate we're not associated */
-+		MAC_ZERO(wrqu.ap_addr.sa_data);
-+		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-+		wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL);
-+	}
-+
-+	adev->status = new_status;
-+
-+	switch (new_status) {
-+	case ACX_STATUS_1_SCANNING:
-+		adev->scan_retries = 0;
-+		/* 1.0 s initial scan time */
-+		acx_set_timer(adev, 1000000);
-+		break;
-+	case ACX_STATUS_2_WAIT_AUTH:
-+	case ACX_STATUS_3_AUTHENTICATED:
-+		adev->auth_or_assoc_retries = 0;
-+		acx_set_timer(adev, 1500000); /* 1.5 s */
-+		break;
-+	}
-+
-+#if QUEUE_OPEN_AFTER_ASSOC
-+	if (new_status == ACX_STATUS_4_ASSOCIATED)	{
-+		if (old_status < ACX_STATUS_4_ASSOCIATED) {
-+			/* ah, we're newly associated now,
-+			 * so let's indicate carrier */
-+			acx_carrier_on(adev->ndev, "after association");
-+			acx_wake_queue(adev->ndev, "after association");
-+		}
-+	} else {
-+		/* not associated any more, so let's kill carrier */
-+		if (old_status >= ACX_STATUS_4_ASSOCIATED) {
-+			acx_carrier_off(adev->ndev, "after losing association");
-+			acx_stop_queue(adev->ndev, "after losing association");
-+		}
-+	}
-+#endif
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_i_timer
-+**
-+** Fires up periodically. Used to kick scan/auth/assoc if something goes wrong
-+*/
-+void
-+acx_i_timer(unsigned long address)
-+{
-+	unsigned long flags;
-+	acx_device_t *adev = (acx_device_t*)address;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	log(L_DEBUG|L_ASSOC, "%s: adev->status=%d (%s)\n",
-+		__func__, adev->status, acx_get_status_name(adev->status));
-+
-+	switch (adev->status) {
-+	case ACX_STATUS_1_SCANNING:
-+		/* was set to 0 by set_status() */
-+		if (++adev->scan_retries < 7) {
-+			acx_set_timer(adev, 1000000);
-+			/* used to interrogate for scan status.
-+			** We rely on SCAN_COMPLETE IRQ instead */
-+			log(L_ASSOC, "continuing scan (%d sec)\n",
-+					adev->scan_retries);
-+		} else {
-+			log(L_ASSOC, "stopping scan\n");
-+			/* send stop_scan cmd when we leave the interrupt context,
-+			 * and make a decision what to do next (COMPLETE_SCAN) */
-+			acx_schedule_task(adev,
-+				ACX_AFTER_IRQ_CMD_STOP_SCAN + ACX_AFTER_IRQ_COMPLETE_SCAN);
-+		}
-+		break;
-+	case ACX_STATUS_2_WAIT_AUTH:
-+		/* was set to 0 by set_status() */
-+		if (++adev->auth_or_assoc_retries < 10) {
-+			log(L_ASSOC, "resend authen1 request (attempt %d)\n",
-+					adev->auth_or_assoc_retries + 1);
-+			acx_l_transmit_authen1(adev);
-+		} else {
-+			/* time exceeded: fall back to scanning mode */
-+			log(L_ASSOC,
-+			       "authen1 request reply timeout, giving up\n");
-+			/* we are a STA, need to find AP anyhow */
-+			acx_set_status(adev, ACX_STATUS_1_SCANNING);
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN);
-+		}
-+		/* used to be 1500000, but some other driver uses 2.5s */
-+		acx_set_timer(adev, 2500000);
-+		break;
-+	case ACX_STATUS_3_AUTHENTICATED:
-+		/* was set to 0 by set_status() */
-+		if (++adev->auth_or_assoc_retries < 10) {
-+			log(L_ASSOC, "resend assoc request (attempt %d)\n",
-+					adev->auth_or_assoc_retries + 1);
-+			acx_l_transmit_assoc_req(adev);
-+		} else {
-+			/* time exceeded: give up */
-+			log(L_ASSOC,
-+				"association request reply timeout, giving up\n");
-+			/* we are a STA, need to find AP anyhow */
-+			acx_set_status(adev, ACX_STATUS_1_SCANNING);
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN);
-+		}
-+		acx_set_timer(adev, 2500000); /* see above */
-+		break;
-+	case ACX_STATUS_4_ASSOCIATED:
-+	default:
-+		break;
-+	}
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_set_timer
-+**
-+** Sets the 802.11 state management timer's timeout.
-+*/
-+void
-+acx_set_timer(acx_device_t *adev, int timeout_us)
-+{
-+	FN_ENTER;
-+
-+	log(L_DEBUG|L_IRQ, "%s(%u ms)\n", __func__, timeout_us/1000);
-+	if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) {
-+		printk("attempt to set the timer "
-+			"when the card interface is not up!\n");
-+		goto end;
-+	}
-+
-+	/* first check if the timer was already initialized, THEN modify it */
-+	if (adev->mgmt_timer.function) {
-+		mod_timer(&adev->mgmt_timer,
-+				jiffies + (timeout_us * HZ / 1000000));
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_assocresp
-+**
-+** We are an AP here
-+*/
-+static const u8
-+dot11ratebyte[] = {
-+	DOT11RATEBYTE_1,
-+	DOT11RATEBYTE_2,
-+	DOT11RATEBYTE_5_5,
-+	DOT11RATEBYTE_6_G,
-+	DOT11RATEBYTE_9_G,
-+	DOT11RATEBYTE_11,
-+	DOT11RATEBYTE_12_G,
-+	DOT11RATEBYTE_18_G,
-+	DOT11RATEBYTE_22,
-+	DOT11RATEBYTE_24_G,
-+	DOT11RATEBYTE_36_G,
-+	DOT11RATEBYTE_48_G,
-+	DOT11RATEBYTE_54_G,
-+};
-+
-+static inline int
-+find_pos(const u8 *p, int size, u8 v)
-+{
-+	int i;
-+	for (i = 0; i < size; i++)
-+		if (p[i] == v)
-+			return i;
-+	/* printk a message about strange byte? */
-+	return 0;
-+}
-+
-+static void
-+add_bits_to_ratemasks(u8* ratevec, int len, u16* brate, u16* orate)
-+{
-+	while (len--) {
-+		int n = 1 << find_pos(dot11ratebyte,
-+				sizeof(dot11ratebyte), *ratevec & 0x7f);
-+		if (*ratevec & 0x80)
-+			*brate |= n;
-+		*orate |= n;
-+		ratevec++;
-+	}
-+}
-+
-+static int
-+acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct assocresp_frame_body *body;
-+	u8 *p;
-+	const u8 *da;
-+	/* const u8 *sa; */
-+	const u8 *bssid;
-+	client_t *clt;
-+
-+	FN_ENTER;
-+
-+	/* sa = req->hdr->a1; */
-+	da = req->hdr->a2;
-+	bssid = req->hdr->a3;
-+
-+	clt = acx_l_sta_list_get(adev, da);
-+	if (!clt)
-+		goto ok;
-+
-+	/* Assoc without auth is a big no-no */
-+	/* Let's be liberal: if already assoc'ed STA sends assoc req again,
-+	** we won't be rude */
-+	if (clt->used != CLIENT_AUTHENTICATED_2
-+	 && clt->used != CLIENT_ASSOCIATED_3) {
-+		acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH);
-+		goto bad;
-+	}
-+
-+	clt->used = CLIENT_ASSOCIATED_3;
-+
-+	if (clt->aid == 0)
-+		clt->aid = ++adev->aid;
-+	clt->cap_info = ieee2host16(*(req->cap_info));
-+
-+	/* We cheat here a bit. We don't really care which rates are flagged
-+	** as basic by the client, so we stuff them in single ratemask */
-+	clt->rate_cap = 0;
-+	if (req->supp_rates)
-+		add_bits_to_ratemasks(req->supp_rates->rates,
-+			req->supp_rates->len, &clt->rate_cap, &clt->rate_cap);
-+	if (req->ext_rates)
-+		add_bits_to_ratemasks(req->ext_rates->rates,
-+			req->ext_rates->len, &clt->rate_cap, &clt->rate_cap);
-+	/* We can check that client supports all basic rates,
-+	** and deny assoc if not. But let's be liberal, right? ;) */
-+	clt->rate_cfg = clt->rate_cap & adev->rate_oper;
-+	if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper);
-+	clt->rate_cur = 1 << lowest_bit(clt->rate_cfg);
-+	if (IS_ACX100(adev))
-+		clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)];
-+	clt->fallback_count = clt->stepup_count = 0;
-+	clt->ignore_count = 16;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_ASSOCRESPi;
-+	head->dur = req->hdr->dur;
-+	MAC_COPY(head->da, da);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, bssid);
-+	head->seq = req->hdr->seq;
-+
-+	body->cap_info = host2ieee16(adev->capabilities);
-+	body->status = host2ieee16(0);
-+	body->aid = host2ieee16(clt->aid);
-+	p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len,
-+							adev->rate_supported);
-+	p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len,
-+							adev->rate_supported);
-+
-+	acx_l_tx_data(adev, tx, p - (u8*)head);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+* acx_l_transmit_reassocresp
-+
-+You may be wondering, just like me, what the hell ReAuth is.
-+In practice it was seen sent by STA when STA feels like losing connection.
-+
-+[802.11]
-+
-+5.4.2.3 Reassociation
-+
-+Association is sufficient for no-transition message delivery between
-+IEEE 802.11 stations. Additional functionality is needed to support
-+BSS-transition mobility. The additional required functionality
-+is provided by the reassociation service. Reassociation is a DSS.
-+The reassociation service is invoked to 'move' a current association
-+from one AP to another. This keeps the DS informed of the current
-+mapping between AP and STA as the station moves from BSS to BSS within
-+an ESS. Reassociation also enables changing association attributes
-+of an established association while the STA remains associated with
-+the same AP. Reassociation is always initiated by the mobile STA.
-+
-+5.4.3.1 Authentication
-+...
-+A STA may be authenticated with many other STAs at any given instant.
-+
-+5.4.3.1.1 Preauthentication
-+
-+Because the authentication process could be time-consuming (depending
-+on the authentication protocol in use), the authentication service can
-+be invoked independently of the association service. Preauthentication
-+is typically done by a STA while it is already associated with an AP
-+(with which it previously authenticated). IEEE 802.11 does not require
-+that STAs preauthenticate with APs. However, authentication is required
-+before an association can be established. If the authentication is left
-+until reassociation time, this may impact the speed with which a STA can
-+reassociate between APs, limiting BSS-transition mobility performance.
-+The use of preauthentication takes the authentication service overhead
-+out of the time-critical reassociation process.
-+
-+5.7.3 Reassociation
-+
-+For a STA to reassociate, the reassociation service causes the following
-+message to occur:
-+
-+  Reassociation request
-+
-+* Message type: Management
-+* Message subtype: Reassociation request
-+* Information items:
-+  - IEEE address of the STA
-+  - IEEE address of the AP with which the STA will reassociate
-+  - IEEE address of the AP with which the STA is currently associated
-+  - ESSID
-+* Direction of message: From STA to 'new' AP
-+
-+The address of the current AP is included for efficiency. The inclusion
-+of the current AP address facilitates MAC reassociation to be independent
-+of the DS implementation.
-+
-+  Reassociation response
-+* Message type: Management
-+* Message subtype: Reassociation response
-+* Information items:
-+  - Result of the requested reassociation. (success/failure)
-+  - If the reassociation is successful, the response shall include the AID.
-+* Direction of message: From AP to STA
-+
-+7.2.3.6 Reassociation Request frame format
-+
-+The frame body of a management frame of subtype Reassociation Request
-+contains the information shown in Table 9.
-+
-+Table 9 Reassociation Request frame body
-+Order Information
-+1 Capability information
-+2 Listen interval
-+3 Current AP address
-+4 SSID
-+5 Supported rates
-+
-+7.2.3.7 Reassociation Response frame format
-+
-+The frame body of a management frame of subtype Reassociation Response
-+contains the information shown in Table 10.
-+
-+Table 10 Reassociation Response frame body
-+Order Information
-+1 Capability information
-+2 Status code
-+3 Association ID (AID)
-+4 Supported rates
-+
-+*/
-+static int
-+acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct reassocresp_frame_body *body;
-+	u8 *p;
-+	const u8 *da;
-+	/* const u8 *sa; */
-+	const u8 *bssid;
-+	client_t *clt;
-+
-+	FN_ENTER;
-+
-+	/* sa = req->hdr->a1; */
-+	da = req->hdr->a2;
-+	bssid = req->hdr->a3;
-+
-+	/* Must be already authenticated, so it must be in the list */
-+	clt = acx_l_sta_list_get(adev, da);
-+	if (!clt)
-+		goto ok;
-+
-+	/* Assoc without auth is a big no-no */
-+	/* Already assoc'ed STAs sending ReAssoc req are ok per 802.11 */
-+	if (clt->used != CLIENT_AUTHENTICATED_2
-+	 && clt->used != CLIENT_ASSOCIATED_3) {
-+		acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH);
-+		goto bad;
-+	}
-+
-+	clt->used = CLIENT_ASSOCIATED_3;
-+	if (clt->aid == 0) {
-+		clt->aid = ++adev->aid;
-+	}
-+	if (req->cap_info)
-+		clt->cap_info = ieee2host16(*(req->cap_info));
-+
-+	/* We cheat here a bit. We don't really care which rates are flagged
-+	** as basic by the client, so we stuff them in single ratemask */
-+	clt->rate_cap = 0;
-+	if (req->supp_rates)
-+		add_bits_to_ratemasks(req->supp_rates->rates,
-+			req->supp_rates->len, &clt->rate_cap, &clt->rate_cap);
-+	if (req->ext_rates)
-+		add_bits_to_ratemasks(req->ext_rates->rates,
-+			req->ext_rates->len, &clt->rate_cap, &clt->rate_cap);
-+	/* We can check that client supports all basic rates,
-+	** and deny assoc if not. But let's be liberal, right? ;) */
-+	clt->rate_cfg = clt->rate_cap & adev->rate_oper;
-+	if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper);
-+	clt->rate_cur = 1 << lowest_bit(clt->rate_cfg);
-+	if (IS_ACX100(adev))
-+		clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)];
-+
-+	clt->fallback_count = clt->stepup_count = 0;
-+	clt->ignore_count = 16;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto ok;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto ok;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_REASSOCRESPi;
-+	head->dur = req->hdr->dur;
-+	MAC_COPY(head->da, da);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, bssid);
-+	head->seq = req->hdr->seq;
-+
-+	/* IEs: 1. caps */
-+	body->cap_info = host2ieee16(adev->capabilities);
-+	/* 2. status code */
-+	body->status = host2ieee16(0);
-+	/* 3. AID */
-+	body->aid = host2ieee16(clt->aid);
-+	/* 4. supp rates */
-+	p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len,
-+							adev->rate_supported);
-+	/* 5. ext supp rates */
-+	p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len,
-+							adev->rate_supported);
-+
-+	acx_l_tx_data(adev, tx, p - (u8*)head);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_disassoc_from_sta
-+*/
-+static void
-+acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req)
-+{
-+	const u8 *ta;
-+	client_t *clt;
-+
-+	FN_ENTER;
-+
-+	ta = req->hdr->a2;
-+	clt = acx_l_sta_list_get(adev, ta);
-+	if (!clt)
-+		goto end;
-+
-+	if (clt->used != CLIENT_ASSOCIATED_3
-+	 && clt->used != CLIENT_AUTHENTICATED_2) {
-+		/* it's disassociating, but it's
-+		** not even authenticated! Let it know that */
-+		acxlog_mac(L_ASSOC|L_XFER, "peer ", ta, "has sent disassoc "
-+			"req but it is not even auth'ed! sending deauth\n");
-+		acx_l_transmit_deauthen(adev, ta,
-+			WLAN_MGMT_REASON_CLASS2_NONAUTH);
-+		clt->used = CLIENT_EXIST_1;
-+	} else {
-+		/* mark it as auth'ed only */
-+		clt->used = CLIENT_AUTHENTICATED_2;
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_deauthen_from_sta
-+*/
-+static void
-+acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req)
-+{
-+	const wlan_hdr_t *hdr;
-+	client_t *client;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if (acx_debug & L_ASSOC) {
-+		acx_print_mac("got deauth from sta:", hdr->a2, " ");
-+		acx_print_mac("a1:", hdr->a1, " ");
-+		acx_print_mac("a3:", hdr->a3, " ");
-+		acx_print_mac("adev->addr:", adev->dev_addr, " ");
-+		acx_print_mac("adev->bssid:", adev->bssid, "\n");
-+	}
-+
-+	if (!mac_is_equal(adev->dev_addr, hdr->a1)) {
-+		goto end;
-+	}
-+
-+	client = acx_l_sta_list_get(adev, hdr->a2);
-+	if (!client) {
-+		goto end;
-+	}
-+	client->used = CLIENT_EXIST_1;
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_disassoc_from_ap
-+*/
-+static void
-+acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req)
-+{
-+	FN_ENTER;
-+
-+	if (!adev->ap_client) {
-+		/* Hrm, we aren't assoc'ed yet anyhow... */
-+		goto end;
-+	}
-+
-+	printk("%s: got disassoc frame with reason %d (%s)\n",
-+		adev->ndev->name, *req->reason,
-+		acx_wlan_reason_str(*req->reason));
-+
-+	if (mac_is_equal(adev->dev_addr, req->hdr->a1)) {
-+		acx_l_transmit_deauthen(adev, adev->bssid,
-+				WLAN_MGMT_REASON_DEAUTH_LEAVING);
-+		SET_BIT(adev->set_mask, GETSET_RESCAN);
-+		acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_deauth_from_ap
-+*/
-+static void
-+acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req)
-+{
-+	FN_ENTER;
-+
-+	if (!adev->ap_client) {
-+		/* Hrm, we aren't assoc'ed yet anyhow... */
-+		goto end;
-+	}
-+
-+	printk("%s: got deauth frame with reason %d (%s)\n",
-+		adev->ndev->name, *req->reason,
-+		acx_wlan_reason_str(*req->reason));
-+
-+	/* Chk: is ta verified to be from our AP? */
-+	if (mac_is_equal(adev->dev_addr, req->hdr->a1)) {
-+		log(L_DEBUG, "AP sent us deauth packet\n");
-+		SET_BIT(adev->set_mask, GETSET_RESCAN);
-+		acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_rx
-+**
-+** The end of the Rx path. Pulls data from a rxhostdesc into a socket
-+** buffer and feeds it to the network stack via netif_rx().
-+*/
-+static void
-+acx_l_rx(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	FN_ENTER;
-+	if (likely(adev->dev_state_mask & ACX_STATE_IFACE_UP)) {
-+		struct sk_buff *skb;
-+		skb = acx_rxbuf_to_ether(adev, rxbuf);
-+		if (likely(skb)) {
-+			netif_rx(skb);
-+			adev->ndev->last_rx = jiffies;
-+			adev->stats.rx_packets++;
-+			adev->stats.rx_bytes += skb->len;
-+		}
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_data_frame_master
-+*/
-+static int
-+acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	struct wlan_hdr *hdr;
-+	struct tx *tx;
-+	void *txbuf;
-+	int len;
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	switch (WF_FC_FROMTODSi & hdr->fc) {
-+	case 0:
-+	case WF_FC_FROMDSi:
-+		log(L_DEBUG, "ap->sta or adhoc->adhoc data frame ignored\n");
-+		goto done;
-+	case WF_FC_TODSi:
-+		break;
-+	default: /* WF_FC_FROMTODSi */
-+		log(L_DEBUG, "wds data frame ignored (TODO)\n");
-+		goto done;
-+	}
-+
-+	/* check if it is our BSSID, if not, leave */
-+	if (!mac_is_equal(adev->bssid, hdr->a1)) {
-+		goto done;
-+	}
-+
-+	if (mac_is_equal(adev->dev_addr, hdr->a3)) {
-+		/* this one is for us */
-+		acx_l_rx(adev, rxbuf);
-+	} else {
-+		if (mac_is_bcast(hdr->a3)) {
-+			/* this one is bcast, rx it too */
-+			acx_l_rx(adev, rxbuf);
-+		}
-+		tx = acx_l_alloc_tx(adev);
-+		if (!tx) {
-+			goto fail;
-+		}
-+		/* repackage, tx, and hope it someday reaches its destination */
-+		/* order is important, we do it in-place */
-+		MAC_COPY(hdr->a1, hdr->a3);
-+		MAC_COPY(hdr->a3, hdr->a2);
-+		MAC_COPY(hdr->a2, adev->bssid);
-+		/* To_DS = 0, From_DS = 1 */
-+		hdr->fc = WF_FC_FROMDSi + WF_FTYPE_DATAi;
-+
-+		txbuf = acx_l_get_txbuf(adev, tx);
-+		if (txbuf) {
-+			len = RXBUF_BYTES_RCVD(adev, rxbuf);
-+			memcpy(txbuf, hdr, len);
-+			acx_l_tx_data(adev, tx, len);
-+		} else {
-+			acx_l_dealloc_tx(adev, tx);
-+		}
-+	}
-+done:
-+	result = OK;
-+fail:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_data_frame_client
-+*/
-+static int
-+acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	const u8 *da, *bssid;
-+	const wlan_hdr_t *hdr;
-+	struct net_device *ndev = adev->ndev;
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	if (ACX_STATUS_4_ASSOCIATED != adev->status)
-+		goto drop;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	switch (WF_FC_FROMTODSi & hdr->fc) {
-+	case 0:
-+		if (adev->mode != ACX_MODE_0_ADHOC) {
-+			log(L_DEBUG, "adhoc->adhoc data frame ignored\n");
-+			goto drop;
-+		}
-+		bssid = hdr->a3;
-+		break;
-+	case WF_FC_FROMDSi:
-+		if (adev->mode != ACX_MODE_2_STA) {
-+			log(L_DEBUG, "ap->sta data frame ignored\n");
-+			goto drop;
-+		}
-+		bssid = hdr->a2;
-+		break;
-+	case WF_FC_TODSi:
-+		log(L_DEBUG, "sta->ap data frame ignored\n");
-+		goto drop;
-+	default: /* WF_FC_FROMTODSi: wds->wds */
-+		log(L_DEBUG, "wds data frame ignored (todo)\n");
-+		goto drop;
-+	}
-+
-+	da = hdr->a1;
-+
-+	if (unlikely(acx_debug & L_DEBUG)) {
-+		acx_print_mac("rx: da=", da, "");
-+		acx_print_mac(" bssid=", bssid, "");
-+		acx_print_mac(" adev->bssid=", adev->bssid, "");
-+		acx_print_mac(" adev->addr=", adev->dev_addr, "\n");
-+	}
-+
-+	/* promiscuous mode --> receive all packets */
-+	if (unlikely(ndev->flags & IFF_PROMISC))
-+		goto process;
-+
-+	/* FIRST, check if it is our BSSID */
-+	if (!mac_is_equal(adev->bssid, bssid)) {
-+		/* is not our BSSID, so bail out */
-+		goto drop;
-+	}
-+
-+	/* then, check if it is our address */
-+	if (mac_is_equal(adev->dev_addr, da)) {
-+		goto process;
-+	}
-+
-+	/* then, check if it is broadcast */
-+	if (mac_is_bcast(da)) {
-+		goto process;
-+	}
-+
-+	if (mac_is_mcast(da)) {
-+		/* unconditionally receive all multicasts */
-+		if (ndev->flags & IFF_ALLMULTI)
-+			goto process;
-+
-+		/* FIXME: need to check against the list of
-+		 * multicast addresses that are configured
-+		 * for the interface (ifconfig) */
-+		log(L_XFER, "FIXME: multicast packet, need to check "
-+			"against a list of multicast addresses "
-+			"(to be created!); accepting packet for now\n");
-+		/* for now, just accept it here */
-+		goto process;
-+	}
-+
-+	log(L_DEBUG, "rx: foreign packet, dropping\n");
-+	goto drop;
-+process:
-+	/* receive packet */
-+	acx_l_rx(adev, rxbuf);
-+
-+	result = OK;
-+drop:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_mgmt_frame
-+**
-+** Theory of operation: mgmt packet gets parsed (to make it easy
-+** to access variable-sized IEs), results stored in 'parsed'.
-+** Then we react to the packet.
-+*/
-+typedef union parsed_mgmt_req {
-+	wlan_fr_mgmt_t mgmt;
-+	wlan_fr_assocreq_t assocreq;
-+	wlan_fr_reassocreq_t reassocreq;
-+	wlan_fr_assocresp_t assocresp;
-+	wlan_fr_reassocresp_t reassocresp;
-+	wlan_fr_beacon_t beacon;
-+	wlan_fr_disassoc_t disassoc;
-+	wlan_fr_authen_t authen;
-+	wlan_fr_deauthen_t deauthen;
-+	wlan_fr_proberesp_t proberesp;
-+} parsed_mgmt_req_t;
-+
-+void BUG_excessive_stack_usage(void);
-+
-+static int
-+acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	parsed_mgmt_req_t parsed;	/* takes ~100 bytes of stack */
-+	wlan_hdr_t *hdr;
-+	int adhoc, sta_scan, sta, ap;
-+	int len;
-+
-+	if (sizeof(parsed) > 256)
-+		BUG_excessive_stack_usage();
-+
-+	FN_ENTER;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	/* Management frames never have these set */
-+	if (WF_FC_FROMTODSi & hdr->fc) {
-+		FN_EXIT1(NOT_OK);
-+		return NOT_OK;
-+	}
-+
-+	len = RXBUF_BYTES_RCVD(adev, rxbuf);
-+	if (WF_FC_ISWEPi & hdr->fc)
-+		len -= 0x10;
-+
-+	adhoc = (adev->mode == ACX_MODE_0_ADHOC);
-+	sta_scan = ((adev->mode == ACX_MODE_2_STA)
-+		 && (adev->status != ACX_STATUS_4_ASSOCIATED));
-+	sta = ((adev->mode == ACX_MODE_2_STA)
-+	    && (adev->status == ACX_STATUS_4_ASSOCIATED));
-+	ap = (adev->mode == ACX_MODE_3_AP);
-+
-+	switch (WF_FC_FSTYPEi & hdr->fc) {
-+	/* beacons first, for speed */
-+	case WF_FSTYPE_BEACONi:
-+		memset(&parsed.beacon, 0, sizeof(parsed.beacon));
-+		parsed.beacon.hdr = hdr;
-+		parsed.beacon.len = len;
-+		if (acx_debug & L_DATA) {
-+			printk("beacon len:%d fc:%04X dur:%04X seq:%04X",
-+			       len, hdr->fc, hdr->dur, hdr->seq);
-+			acx_print_mac(" a1:", hdr->a1, "");
-+			acx_print_mac(" a2:", hdr->a2, "");
-+			acx_print_mac(" a3:", hdr->a3, "\n");
-+		}
-+		wlan_mgmt_decode_beacon(&parsed.beacon);
-+		/* beacon and probe response are very similar, so... */
-+		acx_l_process_probe_response(adev, &parsed.beacon, rxbuf);
-+		break;
-+	case WF_FSTYPE_ASSOCREQi:
-+		if (!ap)
-+			break;
-+		memset(&parsed.assocreq, 0, sizeof(parsed.assocreq));
-+		parsed.assocreq.hdr = hdr;
-+		parsed.assocreq.len = len;
-+		wlan_mgmt_decode_assocreq(&parsed.assocreq);
-+		if (mac_is_equal(hdr->a1, adev->bssid)
-+		 && mac_is_equal(hdr->a3, adev->bssid)) {
-+			acx_l_transmit_assocresp(adev, &parsed.assocreq);
-+		}
-+		break;
-+	case WF_FSTYPE_REASSOCREQi:
-+		if (!ap)
-+			break;
-+		memset(&parsed.assocreq, 0, sizeof(parsed.assocreq));
-+		parsed.assocreq.hdr = hdr;
-+		parsed.assocreq.len = len;
-+		wlan_mgmt_decode_assocreq(&parsed.assocreq);
-+		/* reassocreq and assocreq are equivalent */
-+		acx_l_transmit_reassocresp(adev, &parsed.reassocreq);
-+		break;
-+	case WF_FSTYPE_ASSOCRESPi:
-+		if (!sta_scan)
-+			break;
-+		memset(&parsed.assocresp, 0, sizeof(parsed.assocresp));
-+		parsed.assocresp.hdr = hdr;
-+		parsed.assocresp.len = len;
-+		wlan_mgmt_decode_assocresp(&parsed.assocresp);
-+		acx_l_process_assocresp(adev, &parsed.assocresp);
-+		break;
-+	case WF_FSTYPE_REASSOCRESPi:
-+		if (!sta_scan)
-+			break;
-+		memset(&parsed.assocresp, 0, sizeof(parsed.assocresp));
-+		parsed.assocresp.hdr = hdr;
-+		parsed.assocresp.len = len;
-+		wlan_mgmt_decode_assocresp(&parsed.assocresp);
-+		acx_l_process_reassocresp(adev, &parsed.reassocresp);
-+		break;
-+	case WF_FSTYPE_PROBEREQi:
-+		if (ap || adhoc) {
-+			/* FIXME: since we're supposed to be an AP,
-+			** we need to return a Probe Response packet.
-+			** Currently firmware is doing it for us,
-+			** but firmware is buggy! See comment elsewhere --vda */
-+		}
-+		break;
-+	case WF_FSTYPE_PROBERESPi:
-+		memset(&parsed.proberesp, 0, sizeof(parsed.proberesp));
-+		parsed.proberesp.hdr = hdr;
-+		parsed.proberesp.len = len;
-+		wlan_mgmt_decode_proberesp(&parsed.proberesp);
-+		acx_l_process_probe_response(adev, &parsed.proberesp, rxbuf);
-+		break;
-+	case 6:
-+	case 7:
-+		/* exit */
-+		break;
-+	case WF_FSTYPE_ATIMi:
-+		/* exit */
-+		break;
-+	case WF_FSTYPE_DISASSOCi:
-+		if (!sta && !ap)
-+			break;
-+		memset(&parsed.disassoc, 0, sizeof(parsed.disassoc));
-+		parsed.disassoc.hdr = hdr;
-+		parsed.disassoc.len = len;
-+		wlan_mgmt_decode_disassoc(&parsed.disassoc);
-+		if (sta)
-+			acx_l_process_disassoc_from_ap(adev, &parsed.disassoc);
-+		else
-+			acx_l_process_disassoc_from_sta(adev, &parsed.disassoc);
-+		break;
-+	case WF_FSTYPE_AUTHENi:
-+		if (!sta_scan && !ap)
-+			break;
-+		memset(&parsed.authen, 0, sizeof(parsed.authen));
-+		parsed.authen.hdr = hdr;
-+		parsed.authen.len = len;
-+		wlan_mgmt_decode_authen(&parsed.authen);
-+		acx_l_process_authen(adev, &parsed.authen);
-+		break;
-+	case WF_FSTYPE_DEAUTHENi:
-+		if (!sta && !ap)
-+			break;
-+		memset(&parsed.deauthen, 0, sizeof(parsed.deauthen));
-+		parsed.deauthen.hdr = hdr;
-+		parsed.deauthen.len = len;
-+		wlan_mgmt_decode_deauthen(&parsed.deauthen);
-+		if (sta)
-+			acx_l_process_deauth_from_ap(adev, &parsed.deauthen);
-+		else
-+			acx_l_process_deauth_from_sta(adev, &parsed.deauthen);
-+		break;
-+	}
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+#ifdef UNUSED
-+/***********************************************************************
-+** acx_process_class_frame
-+**
-+** Called from IRQ context only
-+*/
-+static int
-+acx_process_class_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala)
-+{
-+	return OK;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_l_process_NULL_frame
-+*/
-+#ifdef BOGUS_ITS_NOT_A_NULL_FRAME_HANDLER_AT_ALL
-+static int
-+acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala)
-+{
-+	const signed char *esi;
-+	const u8 *ebx;
-+	const wlan_hdr_t *hdr;
-+	const client_t *client;
-+	int result = NOT_OK;
-+
-+	hdr = acx_get_wlan_hdr(adev, rxbuf);
-+
-+	switch (WF_FC_FROMTODSi & hdr->fc) {
-+	case 0:
-+		esi = hdr->a1;
-+		ebx = hdr->a2;
-+		break;
-+	case WF_FC_FROMDSi:
-+		esi = hdr->a1;
-+		ebx = hdr->a3;
-+		break;
-+	case WF_FC_TODSi:
-+		esi = hdr->a1;
-+		ebx = hdr->a2;
-+		break;
-+	default: /* WF_FC_FROMTODSi */
-+		esi = hdr->a1; /* added by me! --vda */
-+		ebx = hdr->a2;
-+	}
-+
-+	if (esi[0x0] < 0) {
-+		result = OK;
-+		goto done;
-+	}
-+
-+	client = acx_l_sta_list_get(adev, ebx);
-+	if (client)
-+		result = NOT_OK;
-+	else {
-+#ifdef IS_IT_BROKEN
-+		log(L_DEBUG|L_XFER, "<transmit_deauth 7>\n");
-+		acx_l_transmit_deauthen(adev, ebx,
-+			WLAN_MGMT_REASON_CLASS2_NONAUTH);
-+#else
-+		log(L_DEBUG, "received NULL frame from unknown client! "
-+			"We really shouldn't send deauthen here, right?\n");
-+#endif
-+		result = OK;
-+	}
-+done:
-+	return result;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_l_process_probe_response
-+*/
-+static int
-+acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req,
-+			const rxbuffer_t *rxbuf)
-+{
-+	struct client *bss;
-+	wlan_hdr_t *hdr;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if (mac_is_equal(hdr->a3, adev->dev_addr)) {
-+		log(L_ASSOC, "huh, scan found our own MAC!?\n");
-+		goto ok; /* just skip this one silently */
-+	}
-+
-+	bss = acx_l_sta_list_get_or_add(adev, hdr->a2);
-+
-+	/* NB: be careful modifying bss data! It may be one
-+	** of the already known clients (like our AP if we are a STA)
-+	** Thus do not blindly modify e.g. current ratemask! */
-+
-+	if (STA_LIST_ADD_CAN_FAIL && !bss) {
-+		/* uh oh, we found more sites/stations than we can handle with
-+		 * our current setup: pull the emergency brake and stop scanning! */
-+		acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_STOP_SCAN);
-+		/* TODO: a nice comment what below call achieves --vda */
-+		acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH);
-+		goto ok;
-+	}
-+	/* NB: get_or_add already filled bss->address = hdr->a2 */
-+	MAC_COPY(bss->bssid, hdr->a3);
-+
-+	/* copy the ESSID element */
-+	if (req->ssid && req->ssid->len <= IW_ESSID_MAX_SIZE) {
-+		bss->essid_len = req->ssid->len;
-+		memcpy(bss->essid, req->ssid->ssid, req->ssid->len);
-+		bss->essid[req->ssid->len] = '\0';
-+	} else {
-+		/* Either no ESSID IE or oversized one */
-+		printk("%s: received packet has bogus ESSID\n",
-+						    adev->ndev->name);
-+	}
-+
-+	if (req->ds_parms)
-+		bss->channel = req->ds_parms->curr_ch;
-+	if (req->cap_info)
-+		bss->cap_info = ieee2host16(*req->cap_info);
-+
-+	bss->sir = acx_signal_to_winlevel(rxbuf->phy_level);
-+	bss->snr = acx_signal_to_winlevel(rxbuf->phy_snr);
-+
-+	bss->rate_cap = 0;	/* operational mask */
-+	bss->rate_bas = 0;	/* basic mask */
-+	if (req->supp_rates)
-+		add_bits_to_ratemasks(req->supp_rates->rates,
-+			req->supp_rates->len, &bss->rate_bas, &bss->rate_cap);
-+	if (req->ext_rates)
-+		add_bits_to_ratemasks(req->ext_rates->rates,
-+			req->ext_rates->len, &bss->rate_bas, &bss->rate_cap);
-+	/* Fix up any possible bogosity - code elsewhere
-+	 * is not expecting empty masks */
-+	if (!bss->rate_cap)
-+		bss->rate_cap = adev->rate_basic;
-+	if (!bss->rate_bas)
-+		bss->rate_bas = 1 << lowest_bit(bss->rate_cap);
-+	if (!bss->rate_cur)
-+		bss->rate_cur = 1 << lowest_bit(bss->rate_bas);
-+
-+	/* People moan about this being too noisy at L_ASSOC */
-+	log(L_DEBUG,
-+		"found %s: ESSID=\"%s\" ch=%d "
-+		"BSSID="MACSTR" caps=0x%04X SIR=%d SNR=%d\n",
-+		(bss->cap_info & WF_MGMT_CAP_IBSS) ? "Ad-Hoc peer" : "AP",
-+		bss->essid, bss->channel, MAC(bss->bssid), bss->cap_info,
-+		bss->sir, bss->snr);
-+ok:
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_assocresp
-+*/
-+static int
-+acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req)
-+{
-+	const wlan_hdr_t *hdr;
-+	int res = OK;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if ((ACX_MODE_2_STA == adev->mode)
-+	 && mac_is_equal(adev->dev_addr, hdr->a1)) {
-+		u16 st = ieee2host16(*(req->status));
-+		if (WLAN_MGMT_STATUS_SUCCESS == st) {
-+			adev->aid = ieee2host16(*(req->aid));
-+			/* tell the card we are associated when
-+			** we are out of interrupt context */
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_ASSOCIATE);
-+		} else {
-+
-+			/* TODO: we shall delete peer from sta_list, and try
-+			** other candidates... */
-+
-+			printk("%s: association FAILED: peer sent "
-+				"Status Code %d (%s)\n",
-+				adev->ndev->name, st, get_status_string(st));
-+			res = NOT_OK;
-+		}
-+	}
-+
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_reassocresp
-+*/
-+static int
-+acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req)
-+{
-+	const wlan_hdr_t *hdr;
-+	int result = NOT_OK;
-+	u16 st;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if (!mac_is_equal(adev->dev_addr, hdr->a1)) {
-+		goto end;
-+	}
-+	st = ieee2host16(*(req->status));
-+	if (st == WLAN_MGMT_STATUS_SUCCESS) {
-+		acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+		result = OK;
-+	} else {
-+		printk("%s: reassociation FAILED: peer sent "
-+			"response code %d (%s)\n",
-+			adev->ndev->name, st, get_status_string(st));
-+	}
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_process_authen
-+**
-+** Called only in STA_SCAN or AP mode
-+*/
-+static int
-+acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req)
-+{
-+	const wlan_hdr_t *hdr;
-+	client_t *clt;
-+	wlan_ie_challenge_t *chal;
-+	u16 alg, seq, status;
-+	int ap, result;
-+
-+	FN_ENTER;
-+
-+	hdr = req->hdr;
-+
-+	if (acx_debug & L_ASSOC) {
-+		acx_print_mac("AUTHEN adev->addr=", adev->dev_addr, " ");
-+		acx_print_mac("a1=", hdr->a1, " ");
-+		acx_print_mac("a2=", hdr->a2, " ");
-+		acx_print_mac("a3=", hdr->a3, " ");
-+		acx_print_mac("adev->bssid=", adev->bssid, "\n");
-+	}
-+
-+	if (!mac_is_equal(adev->dev_addr, hdr->a1)
-+	 || !mac_is_equal(adev->bssid, hdr->a3)) {
-+		result = OK;
-+		goto end;
-+	}
-+
-+	alg = ieee2host16(*(req->auth_alg));
-+	seq = ieee2host16(*(req->auth_seq));
-+	status = ieee2host16(*(req->status));
-+
-+	log(L_ASSOC, "auth algorithm %d, auth sequence %d, status %d\n", alg, seq, status);
-+
-+	ap = (adev->mode == ACX_MODE_3_AP);
-+
-+	if (adev->auth_alg <= 1) {
-+		if (adev->auth_alg != alg) {
-+			log(L_ASSOC, "auth algorithm mismatch: "
-+				"our:%d peer:%d\n", adev->auth_alg, alg);
-+			result = NOT_OK;
-+			goto end;
-+		}
-+	}
-+	if (ap) {
-+		clt = acx_l_sta_list_get_or_add(adev, hdr->a2);
-+		if (STA_LIST_ADD_CAN_FAIL && !clt) {
-+			log(L_ASSOC, "could not allocate room for client\n");
-+			result = NOT_OK;
-+			goto end;
-+		}
-+	} else {
-+		clt = adev->ap_client;
-+		if (!mac_is_equal(clt->address, hdr->a2)) {
-+			printk("%s: malformed auth frame from AP?!\n",
-+					adev->ndev->name);
-+			result = NOT_OK;
-+			goto end;
-+		}
-+	}
-+
-+	/* now check which step in the authentication sequence we are
-+	 * currently in, and act accordingly */
-+	switch (seq) {
-+	case 1:
-+		if (!ap)
-+			break;
-+		acx_l_transmit_authen2(adev, req, clt);
-+		break;
-+	case 2:
-+		if (ap)
-+			break;
-+		if (status == WLAN_MGMT_STATUS_SUCCESS) {
-+			if (alg == WLAN_AUTH_ALG_OPENSYSTEM) {
-+				acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED);
-+				acx_l_transmit_assoc_req(adev);
-+			} else
-+			if (alg == WLAN_AUTH_ALG_SHAREDKEY) {
-+				acx_l_transmit_authen3(adev, req);
-+			}
-+		} else {
-+			printk("%s: auth FAILED: peer sent "
-+				"response code %d (%s), "
-+				"still waiting for authentication\n",
-+				adev->ndev->name,
-+				status,	get_status_string(status));
-+			acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH);
-+		}
-+		break;
-+	case 3:
-+		if (!ap)
-+			break;
-+		if ((clt->auth_alg != WLAN_AUTH_ALG_SHAREDKEY)
-+		 || (alg != WLAN_AUTH_ALG_SHAREDKEY)
-+		 || (clt->auth_step != 2))
-+			break;
-+		chal = req->challenge;
-+		if (!chal
-+		 || memcmp(chal->challenge, clt->challenge_text, WLAN_CHALLENGE_LEN)
-+		 || (chal->eid != WLAN_EID_CHALLENGE)
-+		 || (chal->len != WLAN_CHALLENGE_LEN)
-+		)
-+			break;
-+		acx_l_transmit_authen4(adev, req);
-+		MAC_COPY(clt->address, hdr->a2);
-+		clt->used = CLIENT_AUTHENTICATED_2;
-+		clt->auth_step = 4;
-+		clt->seq = ieee2host16(hdr->seq);
-+		break;
-+	case 4:
-+		if (ap)
-+			break;
-+		/* ok, we're through: we're authenticated. Woohoo!! */
-+		acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED);
-+		log(L_ASSOC, "Authenticated!\n");
-+		/* now that we're authenticated, request association */
-+		acx_l_transmit_assoc_req(adev);
-+		break;
-+	}
-+	result = OK;
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_gen_challenge
-+*/
-+static inline void
-+acx_gen_challenge(wlan_ie_challenge_t* d)
-+{
-+	FN_ENTER;
-+	d->eid = WLAN_EID_CHALLENGE;
-+	d->len = WLAN_CHALLENGE_LEN;
-+	get_random_bytes(d->challenge, WLAN_CHALLENGE_LEN);
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_deauthen
-+*/
-+static int
-+acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct deauthen_frame_body *body;
-+
-+	FN_ENTER;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = (WF_FTYPE_MGMTi | WF_FSTYPE_DEAUTHENi);
-+	head->dur = 0;
-+	MAC_COPY(head->da, addr);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, adev->bssid);
-+	head->seq = 0;
-+
-+	log(L_DEBUG|L_ASSOC|L_XFER,
-+		"sending deauthen to "MACSTR" for %d\n",
-+		MAC(addr), reason);
-+
-+	body->reason = host2ieee16(reason);
-+
-+	/* body is fixed size here, but beware of cutting-and-pasting this -
-+	** do not use sizeof(*body) for variable sized mgmt packets! */
-+	acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body));
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_authen1
-+*/
-+static int
-+acx_l_transmit_authen1(acx_device_t *adev)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct auth_frame_body *body;
-+
-+	FN_ENTER;
-+
-+	log(L_ASSOC, "sending authentication1 request (auth algo %d), "
-+		"awaiting response\n", adev->auth_alg);
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_AUTHENi;
-+	/* duration should be 0 instead of 0x8000 to have
-+	 * the firmware calculate the value, right? */
-+	head->dur = 0;
-+	MAC_COPY(head->da, adev->bssid);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, adev->bssid);
-+	head->seq = 0;
-+
-+	body->auth_alg = host2ieee16(adev->auth_alg);
-+	body->auth_seq = host2ieee16(1);
-+	body->status = host2ieee16(0);
-+
-+	acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_authen2
-+*/
-+static int
-+acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req,
-+		      client_t *clt)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct auth_frame_body *body;
-+	unsigned int packet_len;
-+
-+	FN_ENTER;
-+
-+	if (!clt)
-+		goto ok;
-+
-+	MAC_COPY(clt->address, req->hdr->a2);
-+#ifdef UNUSED
-+	clt->ps = ((WF_FC_PWRMGTi & req->hdr->fc) != 0);
-+#endif
-+	clt->auth_alg = ieee2host16(*(req->auth_alg));
-+	clt->auth_step = 2;
-+	clt->seq = ieee2host16(req->hdr->seq);
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_AUTHENi;
-+	head->dur = 0 /* req->hdr->dur */;
-+	MAC_COPY(head->da, req->hdr->a2);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, req->hdr->a3);
-+	head->seq = 0 /* req->hdr->seq */;
-+
-+	/* already in IEEE format, no endianness conversion */
-+	body->auth_alg = *(req->auth_alg);
-+	body->auth_seq = host2ieee16(2);
-+	body->status = host2ieee16(0);
-+
-+	packet_len = WLAN_HDR_A3_LEN + 2 + 2 + 2;
-+	if (ieee2host16(*(req->auth_alg)) == WLAN_AUTH_ALG_OPENSYSTEM) {
-+		clt->used = CLIENT_AUTHENTICATED_2;
-+	} else {	/* shared key */
-+		acx_gen_challenge(&body->challenge);
-+		memcpy(&clt->challenge_text, body->challenge.challenge, WLAN_CHALLENGE_LEN);
-+		packet_len += 2 + 2 + 2 + 1+1+WLAN_CHALLENGE_LEN;
-+	}
-+
-+	acxlog_mac(L_ASSOC|L_XFER,
-+		"transmit_auth2: BSSID=", head->bssid, "\n");
-+
-+	acx_l_tx_data(adev, tx, packet_len);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_authen3
-+*/
-+static int
-+acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct auth_frame_body *body;
-+	unsigned int packet_len;
-+
-+	FN_ENTER;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto ok;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto ok;
-+	}
-+	body = (void*)(head + 1);
-+
-+	/* add WF_FC_ISWEPi: auth step 3 needs to be encrypted */
-+	head->fc = WF_FC_ISWEPi + WF_FSTYPE_AUTHENi;
-+	/* FIXME: is this needed?? authen4 does it...
-+	 * I think it's even wrong since we shouldn't re-use old
-+	 * values but instead let the firmware calculate proper ones
-+	head->dur = req->hdr->dur;
-+	head->seq = req->hdr->seq;
-+	*/
-+	MAC_COPY(head->da, adev->bssid);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, adev->bssid);
-+
-+	/* already in IEEE format, no endianness conversion */
-+	body->auth_alg = *(req->auth_alg);
-+	body->auth_seq = host2ieee16(3);
-+	body->status = host2ieee16(0);
-+	memcpy(&body->challenge, req->challenge, req->challenge->len + 2);
-+	packet_len = WLAN_HDR_A3_LEN + 8 + req->challenge->len;
-+
-+	log(L_ASSOC|L_XFER, "transmit_authen3!\n");
-+
-+	acx_l_tx_data(adev, tx, packet_len);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_authen4
-+*/
-+static int
-+acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct auth_frame_body *body;
-+
-+	FN_ENTER;
-+
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto ok;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto ok;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_AUTHENi; /* 0xb0 */
-+	head->dur = 0 /* req->hdr->dur */;
-+	MAC_COPY(head->da, req->hdr->a2);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, req->hdr->a3);
-+	head->seq = 0 /* req->hdr->seq  */;
-+
-+	/* already in IEEE format, no endianness conversion */
-+	body->auth_alg = *(req->auth_alg);
-+	body->auth_seq = host2ieee16(4);
-+	body->status = host2ieee16(0);
-+
-+	acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2);
-+ok:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_assoc_req
-+**
-+** adev->ap_client is a current candidate AP here
-+*/
-+static int
-+acx_l_transmit_assoc_req(acx_device_t *adev)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	u8 *body, *p, *prate;
-+	unsigned int packet_len;
-+	u16 cap;
-+
-+	FN_ENTER;
-+
-+	log(L_ASSOC, "sending association request, "
-+			"awaiting response. NOT ASSOCIATED YET\n");
-+	tx = acx_l_alloc_tx(adev);
-+	if (!tx)
-+		goto bad;
-+	head = acx_l_get_txbuf(adev, tx);
-+	if (!head) {
-+		acx_l_dealloc_tx(adev, tx);
-+		goto bad;
-+	}
-+	body = (void*)(head + 1);
-+
-+	head->fc = WF_FSTYPE_ASSOCREQi;
-+	head->dur = host2ieee16(0x8000);
-+	MAC_COPY(head->da, adev->bssid);
-+	MAC_COPY(head->sa, adev->dev_addr);
-+	MAC_COPY(head->bssid, adev->bssid);
-+	head->seq = 0;
-+
-+	p = body;
-+	/* now start filling the AssocReq frame body */
-+
-+	/* since this assoc request will most likely only get
-+	 * sent in the STA to AP case (and not when Ad-Hoc IBSS),
-+	 * the cap combination indicated here will thus be
-+	 * WF_MGMT_CAP_ESSi *always* (no IBSS ever)
-+	 * The specs are more than non-obvious on all that:
-+	 *
-+	 * 802.11 7.3.1.4 Capability Information field
-+	** APs set the ESS subfield to 1 and the IBSS subfield to 0 within
-+	** Beacon or Probe Response management frames. STAs within an IBSS
-+	** set the ESS subfield to 0 and the IBSS subfield to 1 in transmitted
-+	** Beacon or Probe Response management frames
-+	**
-+	** APs set the Privacy subfield to 1 within transmitted Beacon,
-+	** Probe Response, Association Response, and Reassociation Response
-+	** if WEP is required for all data type frames within the BSS.
-+	** STAs within an IBSS set the Privacy subfield to 1 in Beacon
-+	** or Probe Response management frames if WEP is required
-+	** for all data type frames within the IBSS */
-+
-+	/* note that returning 0 will be refused by several APs...
-+	 * (so this indicates that you're probably supposed to
-+	 * "confirm" the ESS mode) */
-+	cap = WF_MGMT_CAP_ESSi;
-+
-+	/* this one used to be a check on wep_restricted,
-+	 * but more likely it's wep_enabled instead */
-+	if (adev->wep_enabled)
-+		SET_BIT(cap, WF_MGMT_CAP_PRIVACYi);
-+
-+	/* Probably we can just set these always, because our hw is
-+	** capable of shortpre and PBCC --vda */
-+	/* only ask for short preamble if the peer station supports it */
-+	if (adev->ap_client->cap_info & WF_MGMT_CAP_SHORT)
-+		SET_BIT(cap, WF_MGMT_CAP_SHORTi);
-+	/* only ask for PBCC support if the peer station supports it */
-+	if (adev->ap_client->cap_info & WF_MGMT_CAP_PBCC)
-+		SET_BIT(cap, WF_MGMT_CAP_PBCCi);
-+
-+	/* IEs: 1. caps */
-+	*(u16*)p = cap;	p += 2;
-+	/* 2. listen interval */
-+	*(u16*)p = host2ieee16(adev->listen_interval); p += 2;
-+	/* 3. ESSID */
-+	p = wlan_fill_ie_ssid(p,
-+			strlen(adev->essid_for_assoc), adev->essid_for_assoc);
-+	/* 4. supp rates */
-+	prate = p;
-+	p = wlan_fill_ie_rates(p,
-+			adev->rate_supported_len, adev->rate_supported);
-+	/* 5. ext supp rates */
-+	p = wlan_fill_ie_rates_ext(p,
-+			adev->rate_supported_len, adev->rate_supported);
-+
-+	if (acx_debug & L_DEBUG) {
-+		printk("association: rates element\n");
-+		acx_dump_bytes(prate, p - prate);
-+	}
-+
-+	/* calculate lengths */
-+	packet_len = WLAN_HDR_A3_LEN + (p - body);
-+
-+	log(L_ASSOC, "association: requesting caps 0x%04X, ESSID \"%s\"\n",
-+		cap, adev->essid_for_assoc);
-+
-+	acx_l_tx_data(adev, tx, packet_len);
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_transmit_disassoc
-+**
-+** FIXME: looks like incomplete implementation of a helper:
-+** acx_l_transmit_disassoc(adev, clt) - kick this client (we're an AP)
-+** acx_l_transmit_disassoc(adev, NULL) - leave BSSID (we're a STA)
-+*/
-+#ifdef BROKEN
-+int
-+acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt)
-+{
-+	struct tx *tx;
-+	struct wlan_hdr_mgmt *head;
-+	struct disassoc_frame_body *body;
-+
-+	FN_ENTER;
-+/*	if (clt != NULL) { */
-+		tx = acx_l_alloc_tx(adev);
-+		if (!tx)
-+			goto bad;
-+		head = acx_l_get_txbuf(adev, tx);
-+		if (!head) {
-+			acx_l_dealloc_tx(adev, tx);
-+			goto bad;
-+		}
-+		body = (void*)(head + 1);
-+
-+/*		clt->used = CLIENT_AUTHENTICATED_2; - not (yet?) associated */
-+
-+		head->fc = WF_FSTYPE_DISASSOCi;
-+		head->dur = 0;
-+		/* huh? It muchly depends on whether we're STA or AP...
-+		** sta->ap: da=bssid, sa=own, bssid=bssid
-+		** ap->sta: da=sta, sa=bssid, bssid=bssid. FIXME! */
-+		MAC_COPY(head->da, adev->bssid);
-+		MAC_COPY(head->sa, adev->dev_addr);
-+		MAC_COPY(head->bssid, adev->dev_addr);
-+		head->seq = 0;
-+
-+		/* "Class 3 frame received from nonassociated station." */
-+		body->reason = host2ieee16(7);
-+
-+		/* fixed size struct, ok to sizeof */
-+		acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body));
-+/*	} */
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_s_complete_scan
-+**
-+** Called either from after_interrupt_task() if:
-+** 1) there was Scan_Complete IRQ, or
-+** 2) scanning expired in timer()
-+** We need to decide which ESS or IBSS to join.
-+** Iterates thru adev->sta_list:
-+**	if adev->ap is not bcast, will join only specified
-+**	ESS or IBSS with this bssid
-+**	checks peers' caps for ESS/IBSS bit
-+**	checks peers' SSID, allows exact match or hidden SSID
-+** If station to join is chosen:
-+**	points adev->ap_client to the chosen struct client
-+**	sets adev->essid_for_assoc for future assoc attempt
-+** Auth/assoc is not yet performed
-+** Returns OK if there is no need to restart scan
-+*/
-+int
-+acx_s_complete_scan(acx_device_t *adev)
-+{
-+	struct client *bss;
-+	unsigned long flags;
-+	u16 needed_cap;
-+	int i;
-+	int idx_found = -1;
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+		needed_cap = WF_MGMT_CAP_IBSS; /* 2, we require Ad-Hoc */
-+		break;
-+	case ACX_MODE_2_STA:
-+		needed_cap = WF_MGMT_CAP_ESS; /* 1, we require Managed */
-+		break;
-+	default:
-+		printk("acx: driver bug: mode=%d in complete_scan()\n", adev->mode);
-+		dump_stack();
-+		goto end;
-+	}
-+
-+	acx_lock(adev, flags);
-+
-+	/* TODO: sta_iterator hiding implementation would be nice here... */
-+
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		bss = &adev->sta_list[i];
-+		if (!bss->used) continue;
-+
-+
-+		log(L_ASSOC, "scan table: SSID=\"%s\" CH=%d SIR=%d SNR=%d\n",
-+			bss->essid, bss->channel, bss->sir, bss->snr);
-+
-+		if (!mac_is_bcast(adev->ap))
-+			if (!mac_is_equal(bss->bssid, adev->ap))
-+				continue; /* keep looking */
-+
-+		/* broken peer with no mode flags set? */
-+		if (unlikely(!(bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)))) {
-+			printk("%s: strange peer "MACSTR" found with "
-+				"neither ESS (AP) nor IBSS (Ad-Hoc) "
-+				"capability - skipped\n",
-+				adev->ndev->name, MAC(bss->address));
-+			continue;
-+		}
-+		log(L_ASSOC, "peer_cap 0x%04X, needed_cap 0x%04X\n",
-+		       bss->cap_info, needed_cap);
-+
-+		/* does peer station support what we need? */
-+		if ((bss->cap_info & needed_cap) != needed_cap)
-+			continue; /* keep looking */
-+
-+		/* strange peer with NO basic rates?! */
-+		if (unlikely(!bss->rate_bas)) {
-+			printk("%s: strange peer "MACSTR" with empty rate set "
-+				"- skipped\n",
-+				adev->ndev->name, MAC(bss->address));
-+			continue;
-+		}
-+
-+		/* do we support all basic rates of this peer? */
-+		if ((bss->rate_bas & adev->rate_oper) != bss->rate_bas)	{
-+/* we probably need to have all rates as operational rates,
-+   even in case of an 11M-only configuration */
-+#ifdef THIS_IS_TROUBLESOME
-+			printk("%s: peer "MACSTR": incompatible basic rates "
-+				"(AP requests 0x%04X, we have 0x%04X) "
-+				"- skipped\n",
-+				adev->ndev->name, MAC(bss->address),
-+				bss->rate_bas, adev->rate_oper);
-+			continue;
-+#else
-+			printk("%s: peer "MACSTR": incompatible basic rates "
-+				"(AP requests 0x%04X, we have 0x%04X). "
-+				"Considering anyway...\n",
-+				adev->ndev->name, MAC(bss->address),
-+				bss->rate_bas, adev->rate_oper);
-+#endif
-+		}
-+
-+		if ( !(adev->reg_dom_chanmask & (1<<(bss->channel-1))) ) {
-+			printk("%s: warning: peer "MACSTR" is on channel %d "
-+				"outside of channel range of current "
-+				"regulatory domain - couldn't join "
-+				"even if other settings match. "
-+				"You might want to adapt your config\n",
-+				adev->ndev->name, MAC(bss->address),
-+				bss->channel);
-+			continue; /* keep looking */
-+		}
-+
-+		if (!adev->essid_active || !strcmp(bss->essid, adev->essid)) {
-+			log(L_ASSOC,
-+			       "found station with matching ESSID! ('%s' "
-+			       "station, '%s' config)\n",
-+			       bss->essid,
-+			       (adev->essid_active) ? adev->essid : "[any]");
-+			/* TODO: continue looking for peer with better SNR */
-+			bss->used = CLIENT_JOIN_CANDIDATE;
-+			idx_found = i;
-+
-+			/* stop searching if this station is
-+			 * on the current channel, otherwise
-+			 * keep looking for an even better match */
-+			if (bss->channel == adev->channel)
-+				break;
-+		} else
-+		if (is_hidden_essid(bss->essid)) {
-+			/* hmm, station with empty or single-space SSID:
-+			 * using hidden SSID broadcast?
-+			 */
-+			/* This behaviour is broken: which AP from zillion
-+			** of APs with hidden SSID you'd try?
-+			** We should use Probe requests to get Probe responses
-+			** and check for real SSID (are those never hidden?) */
-+			bss->used = CLIENT_JOIN_CANDIDATE;
-+			if (idx_found == -1)
-+				idx_found = i;
-+			log(L_ASSOC, "found station with empty or "
-+				"single-space (hidden) SSID, considering "
-+				"for assoc attempt\n");
-+			/* ...and keep looking for better matches */
-+		} else {
-+			log(L_ASSOC, "ESSID doesn't match! ('%s' "
-+				"station, '%s' config)\n",
-+				bss->essid,
-+				(adev->essid_active) ? adev->essid : "[any]");
-+		}
-+	}
-+
-+	/* TODO: iterate thru join candidates instead */
-+	/* TODO: rescan if not associated within some timeout */
-+	if (idx_found != -1) {
-+		char *essid_src;
-+		size_t essid_len;
-+
-+		bss = &adev->sta_list[idx_found];
-+		adev->ap_client = bss;
-+
-+		if (is_hidden_essid(bss->essid)) {
-+			/* if the ESSID of the station we found is empty
-+			 * (no broadcast), then use user-configured ESSID
-+			 * instead */
-+			essid_src = adev->essid;
-+			essid_len = adev->essid_len;
-+		} else {
-+			essid_src = bss->essid;
-+			essid_len = strlen(bss->essid);
-+		}
-+
-+		acx_update_capabilities(adev);
-+
-+		memcpy(adev->essid_for_assoc, essid_src, essid_len);
-+		adev->essid_for_assoc[essid_len] = '\0';
-+		adev->channel = bss->channel;
-+		MAC_COPY(adev->bssid, bss->bssid);
-+
-+		bss->rate_cfg = (bss->rate_cap & adev->rate_oper);
-+		bss->rate_cur = 1 << lowest_bit(bss->rate_cfg);
-+		bss->rate_100 = acx_rate111to100(bss->rate_cur);
-+
-+		acxlog_mac(L_ASSOC,
-+			"matching station found: ", adev->bssid, ", joining\n");
-+
-+		/* TODO: do we need to switch to the peer's channel first? */
-+
-+		if (ACX_MODE_0_ADHOC == adev->mode) {
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+		} else {
-+			acx_l_transmit_authen1(adev);
-+			acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH);
-+		}
-+	} else { /* idx_found == -1 */
-+		/* uh oh, no station found in range */
-+		if (ACX_MODE_0_ADHOC == adev->mode) {
-+			printk("%s: no matching station found in range, "
-+				"generating our own IBSS instead\n",
-+				adev->ndev->name);
-+			/* we do it the HostAP way: */
-+			MAC_COPY(adev->bssid, adev->dev_addr);
-+			adev->bssid[0] |= 0x02; /* 'local assigned addr' bit */
-+			/* add IBSS bit to our caps... */
-+			acx_update_capabilities(adev);
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+			/* In order to cmd_join be called below */
-+			idx_found = 0;
-+		} else {
-+			/* we shall scan again, AP can be
-+			** just temporarily powered off */
-+			log(L_ASSOC,
-+				"no matching station found in range yet\n");
-+			acx_set_status(adev, ACX_STATUS_1_SCANNING);
-+			result = NOT_OK;
-+		}
-+	}
-+
-+	acx_unlock(adev, flags);
-+
-+	if (idx_found != -1) {
-+		if (ACX_MODE_0_ADHOC == adev->mode) {
-+			/* need to update channel in beacon template */
-+			SET_BIT(adev->set_mask, SET_TEMPLATES);
-+			if (ACX_STATE_IFACE_UP & adev->dev_state_mask)
-+				acx_s_update_card_settings(adev);
-+		}
-+		/* Inform firmware on our decision to start or join BSS */
-+		acx_s_cmd_join_bssid(adev, adev->bssid);
-+	}
-+
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_read_fw
-+**
-+** Loads a firmware image
-+**
-+** Returns:
-+**  0				unable to load file
-+**  pointer to firmware		success
-+*/
-+firmware_image_t*
-+acx_s_read_fw(struct device *dev, const char *file, u32 *size)
-+{
-+	firmware_image_t *res;
-+	const struct firmware *fw_entry;
-+
-+	res = NULL;
-+	log(L_INIT, "requesting firmware image '%s'\n", file);
-+	if (!request_firmware(&fw_entry, file, dev)) {
-+		*size = 8;
-+		if (fw_entry->size >= 8)
-+			*size = 8 + le32_to_cpu(*(u32 *)(fw_entry->data + 4));
-+		if (fw_entry->size != *size) {
-+			printk("acx: firmware size does not match "
-+				"firmware header: %d != %d, "
-+				"aborting fw upload\n",
-+				(int) fw_entry->size, (int) *size);
-+			goto release_ret;
-+		}
-+		res = vmalloc(*size);
-+		if (!res) {
-+			printk("acx: no memory for firmware "
-+				"(%u bytes)\n", *size);
-+			goto release_ret;
-+		}
-+		memcpy(res, fw_entry->data, fw_entry->size);
-+release_ret:
-+		release_firmware(fw_entry);
-+		return res;
-+	}
-+	printk("acx: firmware image '%s' was not provided. "
-+		"Check your hotplug scripts\n", file);
-+
-+	/* checksum will be verified in write_fw, so don't bother here */
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_set_wepkey
-+*/
-+static void
-+acx100_s_set_wepkey(acx_device_t *adev)
-+{
-+	ie_dot11WEPDefaultKey_t dk;
-+	int i;
-+
-+	for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) {
-+		if (adev->wep_keys[i].size != 0) {
-+			log(L_INIT, "setting WEP key: %d with "
-+				"total size: %d\n", i, (int) adev->wep_keys[i].size);
-+			dk.action = 1;
-+			dk.keySize = adev->wep_keys[i].size;
-+			dk.defaultKeyNum = i;
-+			memcpy(dk.key, adev->wep_keys[i].key, dk.keySize);
-+			acx_s_configure(adev, &dk, ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE);
-+		}
-+	}
-+}
-+
-+static void
-+acx111_s_set_wepkey(acx_device_t *adev)
-+{
-+	acx111WEPDefaultKey_t dk;
-+	int i;
-+
-+	for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) {
-+		if (adev->wep_keys[i].size != 0) {
-+			log(L_INIT, "setting WEP key: %d with "
-+				"total size: %d\n", i, (int) adev->wep_keys[i].size);
-+			memset(&dk, 0, sizeof(dk));
-+			dk.action = cpu_to_le16(1); /* "add key"; yes, that's a 16bit value */
-+			dk.keySize = adev->wep_keys[i].size;
-+
-+			/* are these two lines necessary? */
-+			dk.type = 0;              /* default WEP key */
-+			dk.index = 0;             /* ignored when setting default key */
-+
-+			dk.defaultKeyNum = i;
-+			memcpy(dk.key, adev->wep_keys[i].key, dk.keySize);
-+			acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &dk, sizeof(dk));
-+		}
-+	}
-+}
-+
-+static void
-+acx_s_set_wepkey(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev))
-+		acx111_s_set_wepkey(adev);
-+	else
-+		acx100_s_set_wepkey(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acx100_s_init_wep
-+**
-+** FIXME: this should probably be moved into the new card settings
-+** management, but since we're also modifying the memory map layout here
-+** due to the WEP key space we want, we should take care...
-+*/
-+static int
-+acx100_s_init_wep(acx_device_t *adev)
-+{
-+	acx100_ie_wep_options_t options;
-+	ie_dot11WEPDefaultKeyID_t dk;
-+	acx_ie_memmap_t pt;
-+	int res = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	log(L_DEBUG, "CodeEnd:%X\n", pt.CodeEnd);
-+
-+	pt.WEPCacheStart = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4);
-+	pt.WEPCacheEnd   = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4);
-+
-+	if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) {
-+		goto fail;
-+	}
-+
-+	/* let's choose maximum setting: 4 default keys, plus 10 other keys: */
-+	options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10);
-+	options.WEPOption = 0x00;
-+
-+	log(L_ASSOC, "%s: writing WEP options\n", __func__);
-+	acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS);
-+
-+	acx100_s_set_wepkey(adev);
-+
-+	if (adev->wep_keys[adev->wep_current_index].size != 0) {
-+		log(L_ASSOC, "setting active default WEP key number: %d\n",
-+				adev->wep_current_index);
-+		dk.KeyID = adev->wep_current_index;
-+		acx_s_configure(adev, &dk, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET); /* 0x1010 */
-+	}
-+	/* FIXME!!! wep_key_struct is filled nowhere! But adev
-+	 * is initialized to 0, and we don't REALLY need those keys either */
-+/*		for (i = 0; i < 10; i++) {
-+		if (adev->wep_key_struct[i].len != 0) {
-+			MAC_COPY(wep_mgmt.MacAddr, adev->wep_key_struct[i].addr);
-+			wep_mgmt.KeySize = cpu_to_le16(adev->wep_key_struct[i].len);
-+			memcpy(&wep_mgmt.Key, adev->wep_key_struct[i].key, le16_to_cpu(wep_mgmt.KeySize));
-+			wep_mgmt.Action = cpu_to_le16(1);
-+			log(L_ASSOC, "writing WEP key %d (len %d)\n", i, le16_to_cpu(wep_mgmt.KeySize));
-+			if (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &wep_mgmt, sizeof(wep_mgmt))) {
-+				adev->wep_key_struct[i].index = i;
-+			}
-+		}
-+	}
-+*/
-+
-+	/* now retrieve the updated WEPCacheEnd pointer... */
-+	if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) {
-+		printk("%s: ACX1xx_IE_MEMORY_MAP read #2 FAILED\n",
-+				adev->ndev->name);
-+		goto fail;
-+	}
-+	/* ...and tell it to start allocating templates at that location */
-+	/* (no endianness conversion needed) */
-+	pt.PacketTemplateStart = pt.WEPCacheEnd;
-+
-+	if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) {
-+		printk("%s: ACX1xx_IE_MEMORY_MAP write #2 FAILED\n",
-+				adev->ndev->name);
-+		goto fail;
-+	}
-+	res = OK;
-+
-+fail:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+static int
-+acx_s_init_max_template_generic(acx_device_t *adev, unsigned int len, unsigned int cmd)
-+{
-+	int res;
-+	union {
-+		acx_template_nullframe_t null;
-+		acx_template_beacon_t b;
-+		acx_template_tim_t tim;
-+		acx_template_probereq_t preq;
-+		acx_template_proberesp_t presp;
-+	} templ;
-+
-+	memset(&templ, 0, len);
-+	templ.null.size = cpu_to_le16(len - 2);
-+	res = acx_s_issue_cmd(adev, cmd, &templ, len);
-+	return res;
-+}
-+
-+static inline int
-+acx_s_init_max_null_data_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_nullframe_t), ACX1xx_CMD_CONFIG_NULL_DATA
-+	);
-+}
-+
-+static inline int
-+acx_s_init_max_beacon_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_beacon_t), ACX1xx_CMD_CONFIG_BEACON
-+	);
-+}
-+
-+static inline int
-+acx_s_init_max_tim_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_tim_t), ACX1xx_CMD_CONFIG_TIM
-+	);
-+}
-+
-+static inline int
-+acx_s_init_max_probe_response_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_proberesp_t), ACX1xx_CMD_CONFIG_PROBE_RESPONSE
-+	);
-+}
-+
-+static inline int
-+acx_s_init_max_probe_request_template(acx_device_t *adev)
-+{
-+	return acx_s_init_max_template_generic(
-+		adev, sizeof(acx_template_probereq_t), ACX1xx_CMD_CONFIG_PROBE_REQUEST
-+	);
-+}
-+
-+/***********************************************************************
-+** acx_s_set_tim_template
-+**
-+** FIXME: In full blown driver we will regularly update partial virtual bitmap
-+** by calling this function
-+** (it can be done by irq handler on each DTIM irq or by timer...)
-+
-+[802.11 7.3.2.6] TIM information element:
-+- 1 EID
-+- 1 Length
-+1 1 DTIM Count
-+    indicates how many beacons (including this) appear before next DTIM
-+    (0=this one is a DTIM)
-+2 1 DTIM Period
-+    number of beacons between successive DTIMs
-+    (0=reserved, 1=all TIMs are DTIMs, 2=every other, etc)
-+3 1 Bitmap Control
-+    bit0: Traffic Indicator bit associated with Assoc ID 0 (Bcast AID?)
-+    set to 1 in TIM elements with a value of 0 in the DTIM Count field
-+    when one or more broadcast or multicast frames are buffered at the AP.
-+    bit1-7: Bitmap Offset (logically Bitmap_Offset = Bitmap_Control & 0xFE).
-+4 n Partial Virtual Bitmap
-+    Visible part of traffic-indication bitmap.
-+    Full bitmap consists of 2008 bits (251 octets) such that bit number N
-+    (0<=N<=2007) in the bitmap corresponds to bit number (N mod 8)
-+    in octet number N/8 where the low-order bit of each octet is bit0,
-+    and the high order bit is bit7.
-+    Each set bit in virtual bitmap corresponds to traffic buffered by AP
-+    for a specific station (with corresponding AID?).
-+    Partial Virtual Bitmap shows a part of bitmap which has non-zero.
-+    Bitmap Offset is a number of skipped zero octets (see above).
-+    'Missing' octets at the tail are also assumed to be zero.
-+    Example: Length=6, Bitmap_Offset=2, Partial_Virtual_Bitmap=55 55 55
-+    This means that traffic-indication bitmap is:
-+    00000000 00000000 01010101 01010101 01010101 00000000 00000000...
-+    (is bit0 in the map is always 0 and real value is in Bitmap Control bit0?)
-+*/
-+static int
-+acx_s_set_tim_template(acx_device_t *adev)
-+{
-+/* For now, configure smallish test bitmap, all zero ("no pending data") */
-+	enum { bitmap_size = 5 };
-+
-+	acx_template_tim_t t;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	memset(&t, 0, sizeof(t));
-+	t.size = 5 + bitmap_size; /* eid+len+count+period+bmap_ctrl + bmap */
-+	t.tim_eid = WLAN_EID_TIM;
-+	t.len = 3 + bitmap_size; /* count+period+bmap_ctrl + bmap */
-+	result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_TIM, &t, sizeof(t));
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_fill_beacon_or_proberesp_template
-+**
-+** For frame format info, please see 802.11-1999.pdf item 7.2.3.9 and below!!
-+**
-+** NB: we use the fact that
-+** struct acx_template_proberesp and struct acx_template_beacon are the same
-+** (well, almost...)
-+**
-+** [802.11] Beacon's body consist of these IEs:
-+** 1 Timestamp
-+** 2 Beacon interval
-+** 3 Capability information
-+** 4 SSID
-+** 5 Supported rates (up to 8 rates)
-+** 6 FH Parameter Set (frequency-hopping PHYs only)
-+** 7 DS Parameter Set (direct sequence PHYs only)
-+** 8 CF Parameter Set (only if PCF is supported)
-+** 9 IBSS Parameter Set (ad-hoc only)
-+**
-+** Beacon only:
-+** 10 TIM (AP only) (see 802.11 7.3.2.6)
-+** 11 Country Information (802.11d)
-+** 12 FH Parameters (802.11d)
-+** 13 FH Pattern Table (802.11d)
-+** ... (?!! did not yet find relevant PDF file... --vda)
-+** 19 ERP Information (extended rate PHYs)
-+** 20 Extended Supported Rates (if more than 8 rates)
-+**
-+** Proberesp only:
-+** 10 Country information (802.11d)
-+** 11 FH Parameters (802.11d)
-+** 12 FH Pattern Table (802.11d)
-+** 13-n Requested information elements (802.11d)
-+** ????
-+** 18 ERP Information (extended rate PHYs)
-+** 19 Extended Supported Rates (if more than 8 rates)
-+*/
-+static int
-+acx_fill_beacon_or_proberesp_template(acx_device_t *adev,
-+					struct acx_template_beacon *templ,
-+					u16 fc /* in host order! */)
-+{
-+	int len;
-+	u8 *p;
-+
-+	FN_ENTER;
-+
-+	memset(templ, 0, sizeof(*templ));
-+	MAC_BCAST(templ->da);
-+	MAC_COPY(templ->sa, adev->dev_addr);
-+	MAC_COPY(templ->bssid, adev->bssid);
-+
-+	templ->beacon_interval = cpu_to_le16(adev->beacon_interval);
-+	acx_update_capabilities(adev);
-+	templ->cap = cpu_to_le16(adev->capabilities);
-+
-+	p = templ->variable;
-+	p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid);
-+	p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported);
-+	p = wlan_fill_ie_ds_parms(p, adev->channel);
-+	/* NB: should go AFTER tim, but acx seem to keep tim last always */
-+	p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+		/* ATIM window */
-+		p = wlan_fill_ie_ibss_parms(p, 0); break;
-+	case ACX_MODE_3_AP:
-+		/* TIM IE is set up as separate template */
-+		break;
-+	}
-+
-+	len = p - (u8*)templ;
-+	templ->fc = cpu_to_le16(WF_FTYPE_MGMT | fc);
-+	/* - 2: do not count 'u16 size' field */
-+	templ->size = cpu_to_le16(len - 2);
-+
-+	FN_EXIT1(len);
-+	return len;
-+}
-+
-+
-+#if POWER_SAVE_80211
-+/***********************************************************************
-+** acx_s_set_null_data_template
-+*/
-+static int
-+acx_s_set_null_data_template(acx_device_t *adev)
-+{
-+	struct acx_template_nullframe b;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	/* memset(&b, 0, sizeof(b)); not needed, setting all members */
-+
-+	b.size = cpu_to_le16(sizeof(b) - 2);
-+	b.hdr.fc = WF_FTYPE_MGMTi | WF_FSTYPE_NULLi;
-+	b.hdr.dur = 0;
-+	MAC_BCAST(b.hdr.a1);
-+	MAC_COPY(b.hdr.a2, adev->dev_addr);
-+	MAC_COPY(b.hdr.a3, adev->bssid);
-+	b.hdr.seq = 0;
-+
-+	result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_NULL_DATA, &b, sizeof(b));
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_s_set_beacon_template
-+*/
-+static int
-+acx_s_set_beacon_template(acx_device_t *adev)
-+{
-+	struct acx_template_beacon bcn;
-+	int len, result;
-+
-+	FN_ENTER;
-+
-+	len = acx_fill_beacon_or_proberesp_template(adev, &bcn, WF_FSTYPE_BEACON);
-+	result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_BEACON, &bcn, len);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_set_probe_response_template
-+*/
-+static int
-+acx_s_set_probe_response_template(acx_device_t *adev)
-+{
-+	struct acx_template_proberesp pr;
-+	int len, result;
-+
-+	FN_ENTER;
-+
-+	len = acx_fill_beacon_or_proberesp_template(adev, &pr, WF_FSTYPE_PROBERESP);
-+	result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_RESPONSE, &pr, len);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_init_packet_templates()
-+**
-+** NOTE: order is very important here, to have a correct memory layout!
-+** init templates: max Probe Request (station mode), max NULL data,
-+** max Beacon, max TIM, max Probe Response.
-+*/
-+static int
-+acx_s_init_packet_templates(acx_device_t *adev)
-+{
-+	acx_ie_memmap_t mm; /* ACX100 only */
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	log(L_DEBUG|L_INIT, "initializing max packet templates\n");
-+
-+	if (OK != acx_s_init_max_probe_request_template(adev))
-+		goto failed;
-+
-+	if (OK != acx_s_init_max_null_data_template(adev))
-+		goto failed;
-+
-+	if (OK != acx_s_init_max_beacon_template(adev))
-+		goto failed;
-+
-+	if (OK != acx_s_init_max_tim_template(adev))
-+		goto failed;
-+
-+	if (OK != acx_s_init_max_probe_response_template(adev))
-+		goto failed;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111 doesn't need the memory map magic below,
-+		 * and the other templates will be set later (acx_start) */
-+		result = OK;
-+		goto success;
-+	}
-+
-+	/* ACX100 will have its TIM template set,
-+	 * and we also need to update the memory map */
-+
-+	if (OK != acx_s_set_tim_template(adev))
-+		goto failed_acx100;
-+
-+	log(L_DEBUG, "sizeof(memmap)=%d bytes\n", (int)sizeof(mm));
-+
-+	if (OK != acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP))
-+		goto failed_acx100;
-+
-+	mm.QueueStart = cpu_to_le32(le32_to_cpu(mm.PacketTemplateEnd) + 4);
-+	if (OK != acx_s_configure(adev, &mm, ACX1xx_IE_MEMORY_MAP))
-+		goto failed_acx100;
-+
-+	result = OK;
-+	goto success;
-+
-+failed_acx100:
-+	log(L_DEBUG|L_INIT,
-+		/* "cb=0x%X\n" */
-+		"ACXMemoryMap:\n"
-+		".CodeStart=0x%X\n"
-+		".CodeEnd=0x%X\n"
-+		".WEPCacheStart=0x%X\n"
-+		".WEPCacheEnd=0x%X\n"
-+		".PacketTemplateStart=0x%X\n"
-+		".PacketTemplateEnd=0x%X\n",
-+		/* len, */
-+		le32_to_cpu(mm.CodeStart),
-+		le32_to_cpu(mm.CodeEnd),
-+		le32_to_cpu(mm.WEPCacheStart),
-+		le32_to_cpu(mm.WEPCacheEnd),
-+		le32_to_cpu(mm.PacketTemplateStart),
-+		le32_to_cpu(mm.PacketTemplateEnd));
-+
-+failed:
-+	printk("%s: %s() FAILED\n", adev->ndev->name, __func__);
-+
-+success:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_s_set_probe_request_template(acx_device_t *adev)
-+{
-+	struct acx_template_probereq probereq;
-+	char *p;
-+	int res;
-+	int frame_len;
-+
-+	FN_ENTER;
-+
-+	memset(&probereq, 0, sizeof(probereq));
-+
-+	probereq.fc = WF_FTYPE_MGMTi | WF_FSTYPE_PROBEREQi;
-+	MAC_BCAST(probereq.da);
-+	MAC_COPY(probereq.sa, adev->dev_addr);
-+	MAC_BCAST(probereq.bssid);
-+
-+	p = probereq.variable;
-+	p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid);
-+	p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported);
-+	p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported);
-+	frame_len = p - (char*)&probereq;
-+	probereq.size = cpu_to_le16(frame_len - 2);
-+
-+	res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_REQUEST, &probereq, frame_len);
-+	FN_EXIT0;
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_init_mac
-+*/
-+int
-+acx_s_init_mac(acx_device_t *adev)
-+{
-+	int result = NOT_OK;
-+
-+	FN_ENTER;
-+
-+	if (IS_ACX111(adev)) {
-+		adev->ie_len = acx111_ie_len;
-+		adev->ie_len_dot11 = acx111_ie_len_dot11;
-+	} else {
-+		adev->ie_len = acx100_ie_len;
-+		adev->ie_len_dot11 = acx100_ie_len_dot11;
-+	}
-+
-+#if defined (ACX_MEM)
-+		adev->memblocksize = 256; /* 256 is default */
-+		/* try to load radio for both ACX100 and ACX111, since both
-+		 * chips have at least some firmware versions making use of an
-+		 * external radio module */
-+		acxmem_s_upload_radio(adev);
-+#else
-+	if (IS_PCI(adev)) {
-+		adev->memblocksize = 256; /* 256 is default */
-+		/* try to load radio for both ACX100 and ACX111, since both
-+		 * chips have at least some firmware versions making use of an
-+		 * external radio module */
-+		acxpci_s_upload_radio(adev);
-+	} else {
-+		adev->memblocksize = 128;
-+	}
-+#endif
-+
-+	if (IS_ACX111(adev)) {
-+		/* for ACX111, the order is different from ACX100
-+		   1. init packet templates
-+		   2. create station context and create dma regions
-+		   3. init wep default keys
-+		*/
-+		if (OK != acx_s_init_packet_templates(adev))
-+			goto fail;
-+		if (OK != acx111_s_create_dma_regions(adev)) {
-+			printk("%s: acx111_create_dma_regions FAILED\n",
-+						adev->ndev->name);
-+			goto fail;
-+		}
-+	} else {
-+		if (OK != acx100_s_init_wep(adev))
-+			goto fail;
-+		if (OK != acx_s_init_packet_templates(adev))
-+			goto fail;
-+		if (OK != acx100_s_create_dma_regions(adev)) {
-+			printk("%s: acx100_create_dma_regions FAILED\n",
-+						adev->ndev->name);
-+			goto fail;
-+		}
-+	}
-+
-+	MAC_COPY(adev->ndev->dev_addr, adev->dev_addr);
-+	result = OK;
-+
-+fail:
-+	if (result)
-+		printk("acx: init_mac() FAILED\n");
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+void
-+acx_s_set_sane_reg_domain(acx_device_t *adev, int do_set)
-+{
-+	unsigned mask;
-+
-+	unsigned int i;
-+
-+	for (i = 0; i < sizeof(acx_reg_domain_ids); i++)
-+		if (acx_reg_domain_ids[i] == adev->reg_dom_id)
-+			break;
-+
-+	if (sizeof(acx_reg_domain_ids) == i) {
-+		log(L_INIT, "Invalid or unsupported regulatory domain"
-+			       " 0x%02X specified, falling back to FCC (USA)!"
-+			       " Please report if this sounds fishy!\n",
-+				adev->reg_dom_id);
-+		i = 0;
-+		adev->reg_dom_id = acx_reg_domain_ids[i];
-+
-+		/* since there was a mismatch, we need to force updating */
-+		do_set = 1;
-+	}
-+
-+	if (do_set) {
-+		acx_ie_generic_t dom;
-+		dom.m.bytes[0] = adev->reg_dom_id;
-+		acx_s_configure(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN);
-+	}
-+
-+	adev->reg_dom_chanmask = reg_domain_channel_masks[i];
-+
-+	mask = (1 << (adev->channel - 1));
-+	if (!(adev->reg_dom_chanmask & mask)) {
-+	/* hmm, need to adjust our channel to reside within domain */
-+		mask = 1;
-+		for (i = 1; i <= 14; i++) {
-+			if (adev->reg_dom_chanmask & mask) {
-+				printk("%s: adjusting selected channel from %d "
-+					"to %d due to new regulatory domain\n",
-+					adev->ndev->name, adev->channel, i);
-+				adev->channel = i;
-+				break;
-+			}
-+			mask <<= 1;
-+		}
-+	}
-+}
-+
-+
-+#if POWER_SAVE_80211
-+static void
-+acx_s_update_80211_powersave_mode(acx_device_t *adev)
-+{
-+	/* merge both structs in a union to be able to have common code */
-+	union {
-+		acx111_ie_powersave_t acx111;
-+		acx100_ie_powersave_t acx100;
-+	} pm;
-+
-+	/* change 802.11 power save mode settings */
-+	log(L_INIT, "updating 802.11 power save mode settings: "
-+		"wakeup_cfg 0x%02X, listen interval %u, "
-+		"options 0x%02X, hangover period %u, "
-+		"enhanced_ps_transition_time %u\n",
-+		adev->ps_wakeup_cfg, adev->ps_listen_interval,
-+		adev->ps_options, adev->ps_hangover_period,
-+		adev->ps_enhanced_transition_time);
-+	acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT);
-+	log(L_INIT, "Previous PS mode settings: wakeup_cfg 0x%02X, "
-+		"listen interval %u, options 0x%02X, "
-+		"hangover period %u, "
-+		"enhanced_ps_transition_time %u, beacon_rx_time %u\n",
-+		pm.acx111.wakeup_cfg,
-+		pm.acx111.listen_interval,
-+		pm.acx111.options,
-+		pm.acx111.hangover_period,
-+		IS_ACX111(adev) ?
-+			pm.acx111.enhanced_ps_transition_time
-+		      : pm.acx100.enhanced_ps_transition_time,
-+		IS_ACX111(adev) ?
-+			pm.acx111.beacon_rx_time
-+		      : (u32)-1
-+		);
-+	pm.acx111.wakeup_cfg = adev->ps_wakeup_cfg;
-+	pm.acx111.listen_interval = adev->ps_listen_interval;
-+	pm.acx111.options = adev->ps_options;
-+	pm.acx111.hangover_period = adev->ps_hangover_period;
-+	if (IS_ACX111(adev)) {
-+		pm.acx111.beacon_rx_time = cpu_to_le32(adev->ps_beacon_rx_time);
-+		pm.acx111.enhanced_ps_transition_time = cpu_to_le32(adev->ps_enhanced_transition_time);
-+	} else {
-+		pm.acx100.enhanced_ps_transition_time = cpu_to_le16(adev->ps_enhanced_transition_time);
-+	}
-+	acx_s_configure(adev, &pm, ACX1xx_IE_POWER_MGMT);
-+	acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT);
-+	log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg);
-+	acx_s_msleep(40);
-+	acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT);
-+	log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg);
-+	log(L_INIT, "power save mode change %s\n",
-+		(pm.acx111.wakeup_cfg & PS_CFG_PENDING) ? "FAILED" : "was successful");
-+	/* FIXME: maybe verify via PS_CFG_PENDING bit here
-+	 * that power save mode change was successful. */
-+	/* FIXME: we shouldn't trigger a scan immediately after
-+	 * fiddling with power save mode (since the firmware is sending
-+	 * a NULL frame then). */
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_s_update_card_settings
-+**
-+** Applies accumulated changes in various adev->xxxx members
-+** Called by ioctl commit handler, acx_start, acx_set_defaults,
-+** acx_s_after_interrupt_task (if IRQ_CMD_UPDATE_CARD_CFG),
-+*/
-+static void
-+acx111_s_sens_radio_16_17(acx_device_t *adev)
-+{
-+	u32 feature1, feature2;
-+
-+	if ((adev->sensitivity < 1) || (adev->sensitivity > 3)) {
-+		printk("%s: invalid sensitivity setting (1..3), "
-+			"setting to 1\n", adev->ndev->name);
-+		adev->sensitivity = 1;
-+	}
-+	acx111_s_get_feature_config(adev, &feature1, &feature2);
-+	CLEAR_BIT(feature1, FEATURE1_LOW_RX|FEATURE1_EXTRA_LOW_RX);
-+	if (adev->sensitivity > 1)
-+		SET_BIT(feature1, FEATURE1_LOW_RX);
-+	if (adev->sensitivity > 2)
-+		SET_BIT(feature1, FEATURE1_EXTRA_LOW_RX);
-+	acx111_s_feature_set(adev, feature1, feature2);
-+}
-+
-+
-+void
-+acx_s_update_card_settings(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+	unsigned int start_scan = 0;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X\n",
-+			adev->get_mask, adev->set_mask);
-+
-+	/* Track dependencies betweed various settings */
-+
-+	if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_WEP)) {
-+		log(L_INIT, "important setting has been changed. "
-+			"Need to update packet templates, too\n");
-+		SET_BIT(adev->set_mask, SET_TEMPLATES);
-+	}
-+	if (adev->set_mask & GETSET_CHANNEL) {
-+		/* This will actually tune RX/TX to the channel */
-+		SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX);
-+		switch (adev->mode) {
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_3_AP:
-+			/* Beacons contain channel# - update them */
-+			SET_BIT(adev->set_mask, SET_TEMPLATES);
-+		}
-+		switch (adev->mode) {
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_2_STA:
-+			start_scan = 1;
-+		}
-+	}
-+
-+	/* Apply settings */
-+
-+#ifdef WHY_SHOULD_WE_BOTHER /* imagine we were just powered off */
-+	/* send a disassoc request in case it's required */
-+	if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_CHANNEL|GETSET_WEP)) {
-+		if (ACX_MODE_2_STA == adev->mode) {
-+			if (ACX_STATUS_4_ASSOCIATED == adev->status) {
-+				log(L_ASSOC, "we were ASSOCIATED - "
-+					"sending disassoc request\n");
-+				acx_lock(adev, flags);
-+				acx_l_transmit_disassoc(adev, NULL);
-+				/* FIXME: deauth? */
-+				acx_unlock(adev, flags);
-+			}
-+			/* need to reset some other stuff as well */
-+			log(L_DEBUG, "resetting bssid\n");
-+			MAC_ZERO(adev->bssid);
-+			SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST);
-+			start_scan = 1;
-+		}
-+	}
-+#endif
-+
-+	if (adev->get_mask & GETSET_STATION_ID) {
-+		u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN];
-+		const u8 *paddr;
-+
-+		acx_s_interrogate(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID);
-+		paddr = &stationID[4];
-+		for (i = 0; i < ETH_ALEN; i++) {
-+			/* we copy the MAC address (reversed in
-+			 * the card) to the netdevice's MAC
-+			 * address, and on ifup it will be
-+			 * copied into iwadev->dev_addr */
-+			adev->ndev->dev_addr[ETH_ALEN - 1 - i] = paddr[i];
-+		}
-+		CLEAR_BIT(adev->get_mask, GETSET_STATION_ID);
-+	}
-+
-+	if (adev->get_mask & GETSET_SENSITIVITY) {
-+		if ((RADIO_RFMD_11 == adev->radio_type)
-+		|| (RADIO_MAXIM_0D == adev->radio_type)
-+		|| (RADIO_RALINK_15 == adev->radio_type)) {
-+			acx_s_read_phy_reg(adev, 0x30, &adev->sensitivity);
-+		} else {
-+			log(L_INIT, "don't know how to get sensitivity "
-+				"for radio type 0x%02X\n", adev->radio_type);
-+			adev->sensitivity = 0;
-+		}
-+		log(L_INIT, "got sensitivity value %u\n", adev->sensitivity);
-+
-+		CLEAR_BIT(adev->get_mask, GETSET_SENSITIVITY);
-+	}
-+
-+	if (adev->get_mask & GETSET_ANTENNA) {
-+		u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN];
-+
-+		memset(antenna, 0, sizeof(antenna));
-+		acx_s_interrogate(adev, antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA);
-+		adev->antenna = antenna[4];
-+		log(L_INIT, "got antenna value 0x%02X\n", adev->antenna);
-+		CLEAR_BIT(adev->get_mask, GETSET_ANTENNA);
-+	}
-+
-+	if (adev->get_mask & GETSET_ED_THRESH) {
-+		if (IS_ACX100(adev))	{
-+			u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN];
-+
-+			memset(ed_threshold, 0, sizeof(ed_threshold));
-+			acx_s_interrogate(adev, ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD);
-+			adev->ed_threshold = ed_threshold[4];
-+		} else {
-+			log(L_INIT, "acx111 doesn't support ED\n");
-+			adev->ed_threshold = 0;
-+		}
-+		log(L_INIT, "got Energy Detect (ED) threshold %u\n", adev->ed_threshold);
-+		CLEAR_BIT(adev->get_mask, GETSET_ED_THRESH);
-+	}
-+
-+	if (adev->get_mask & GETSET_CCA) {
-+		if (IS_ACX100(adev))	{
-+			u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN];
-+
-+			memset(cca, 0, sizeof(adev->cca));
-+			acx_s_interrogate(adev, cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE);
-+			adev->cca = cca[4];
-+		} else {
-+			log(L_INIT, "acx111 doesn't support CCA\n");
-+			adev->cca = 0;
-+		}
-+		log(L_INIT, "got Channel Clear Assessment (CCA) value %u\n", adev->cca);
-+		CLEAR_BIT(adev->get_mask, GETSET_CCA);
-+	}
-+
-+	if (adev->get_mask & GETSET_REG_DOMAIN) {
-+		acx_ie_generic_t dom;
-+
-+		acx_s_interrogate(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN);
-+		adev->reg_dom_id = dom.m.bytes[0];
-+		acx_s_set_sane_reg_domain(adev, 0);
-+		log(L_INIT, "got regulatory domain 0x%02X\n", adev->reg_dom_id);
-+		CLEAR_BIT(adev->get_mask, GETSET_REG_DOMAIN);
-+	}
-+
-+	if (adev->set_mask & GETSET_STATION_ID) {
-+		u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN];
-+		u8 *paddr;
-+
-+		paddr = &stationID[4];
-+		memcpy(adev->dev_addr, adev->ndev->dev_addr, ETH_ALEN);
-+		for (i = 0; i < ETH_ALEN; i++) {
-+			/* copy the MAC address we obtained when we noticed
-+			 * that the ethernet iface's MAC changed
-+			 * to the card (reversed in
-+			 * the card!) */
-+			paddr[i] = adev->dev_addr[ETH_ALEN - 1 - i];
-+		}
-+		acx_s_configure(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID);
-+		CLEAR_BIT(adev->set_mask, GETSET_STATION_ID);
-+	}
-+
-+	if (adev->set_mask & SET_TEMPLATES) {
-+		log(L_INIT, "updating packet templates\n");
-+		switch (adev->mode) {
-+		case ACX_MODE_2_STA:
-+			acx_s_set_probe_request_template(adev);
-+#if POWER_SAVE_80211
-+			acx_s_set_null_data_template(adev);
-+#endif
-+			break;
-+		case ACX_MODE_0_ADHOC:
-+			acx_s_set_probe_request_template(adev);
-+#if POWER_SAVE_80211
-+			/* maybe power save functionality is somehow possible
-+			 * for Ad-Hoc mode, too... FIXME: verify it somehow? firmware debug fields? */
-+			acx_s_set_null_data_template(adev);
-+#endif
-+			/* fall through */
-+		case ACX_MODE_3_AP:
-+			acx_s_set_beacon_template(adev);
-+			acx_s_set_tim_template(adev);
-+			/* BTW acx111 firmware would not send probe responses
-+			** if probe request does not have all basic rates flagged
-+			** by 0x80! Thus firmware does not conform to 802.11,
-+			** it should ignore 0x80 bit in ratevector from STA.
-+			** We can 'fix' it by not using this template and
-+			** sending probe responses by hand. TODO --vda */
-+			acx_s_set_probe_response_template(adev);
-+		}
-+		/* Needed if generated frames are to be emitted at different tx rate now */
-+		log(L_IRQ, "redoing cmd_join_bssid() after template cfg\n");
-+		acx_s_cmd_join_bssid(adev, adev->bssid);
-+		CLEAR_BIT(adev->set_mask, SET_TEMPLATES);
-+	}
-+	if (adev->set_mask & SET_STA_LIST) {
-+		acx_lock(adev, flags);
-+		acx_l_sta_list_init(adev);
-+		CLEAR_BIT(adev->set_mask, SET_STA_LIST);
-+		acx_unlock(adev, flags);
-+	}
-+	if (adev->set_mask & SET_RATE_FALLBACK) {
-+		u8 rate[4 + ACX1xx_IE_RATE_FALLBACK_LEN];
-+
-+		/* configure to not do fallbacks when not in auto rate mode */
-+		rate[4] = (adev->rate_auto) ? /* adev->txrate_fallback_retries */ 1 : 0;
-+		log(L_INIT, "updating Tx fallback to %u retries\n", rate[4]);
-+		acx_s_configure(adev, &rate, ACX1xx_IE_RATE_FALLBACK);
-+		CLEAR_BIT(adev->set_mask, SET_RATE_FALLBACK);
-+	}
-+	if (adev->set_mask & GETSET_TXPOWER) {
-+		log(L_INIT, "updating transmit power: %u dBm\n",
-+					adev->tx_level_dbm);
-+		acx_s_set_tx_level(adev, adev->tx_level_dbm);
-+		CLEAR_BIT(adev->set_mask, GETSET_TXPOWER);
-+	}
-+
-+	if (adev->set_mask & GETSET_SENSITIVITY) {
-+		log(L_INIT, "updating sensitivity value: %u\n",
-+					adev->sensitivity);
-+		switch (adev->radio_type) {
-+		case RADIO_RFMD_11:
-+		case RADIO_MAXIM_0D:
-+		case RADIO_RALINK_15:
-+			acx_s_write_phy_reg(adev, 0x30, adev->sensitivity);
-+			break;
-+		case RADIO_RADIA_16:
-+		case RADIO_UNKNOWN_17:
-+			acx111_s_sens_radio_16_17(adev);
-+			break;
-+		default:
-+			log(L_INIT, "don't know how to modify sensitivity "
-+				"for radio type 0x%02X\n", adev->radio_type);
-+		}
-+		CLEAR_BIT(adev->set_mask, GETSET_SENSITIVITY);
-+	}
-+
-+	if (adev->set_mask & GETSET_ANTENNA) {
-+		/* antenna */
-+		u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN];
-+
-+		memset(antenna, 0, sizeof(antenna));
-+		antenna[4] = adev->antenna;
-+		log(L_INIT, "updating antenna value: 0x%02X\n",
-+					adev->antenna);
-+		acx_s_configure(adev, &antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA);
-+		CLEAR_BIT(adev->set_mask, GETSET_ANTENNA);
-+	}
-+
-+	if (adev->set_mask & GETSET_ED_THRESH) {
-+		/* ed_threshold */
-+		log(L_INIT, "updating Energy Detect (ED) threshold: %u\n",
-+					adev->ed_threshold);
-+		if (IS_ACX100(adev)) {
-+			u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN];
-+
-+			memset(ed_threshold, 0, sizeof(ed_threshold));
-+			ed_threshold[4] = adev->ed_threshold;
-+			acx_s_configure(adev, &ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD);
-+		}
-+		else
-+			log(L_INIT, "acx111 doesn't support ED!\n");
-+		CLEAR_BIT(adev->set_mask, GETSET_ED_THRESH);
-+	}
-+
-+	if (adev->set_mask & GETSET_CCA) {
-+		/* CCA value */
-+		log(L_INIT, "updating Channel Clear Assessment "
-+				"(CCA) value: 0x%02X\n", adev->cca);
-+		if (IS_ACX100(adev))	{
-+			u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN];
-+
-+			memset(cca, 0, sizeof(cca));
-+			cca[4] = adev->cca;
-+			acx_s_configure(adev, &cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE);
-+		}
-+		else
-+			log(L_INIT, "acx111 doesn't support CCA!\n");
-+		CLEAR_BIT(adev->set_mask, GETSET_CCA);
-+	}
-+
-+	if (adev->set_mask & GETSET_LED_POWER) {
-+		/* Enable Tx */
-+		log(L_INIT, "updating power LED status: %u\n", adev->led_power);
-+
-+		acx_lock(adev, flags);
-+#if defined (ACX_MEM)
-+		acxmem_l_power_led(adev, adev->led_power);
-+#else
-+		if (IS_PCI(adev))
-+			acxpci_l_power_led(adev, adev->led_power);
-+#endif
-+		CLEAR_BIT(adev->set_mask, GETSET_LED_POWER);
-+		acx_unlock(adev, flags);
-+	}
-+
-+	if (adev->set_mask & GETSET_POWER_80211) {
-+#if POWER_SAVE_80211
-+		acx_s_update_80211_powersave_mode(adev);
-+#endif
-+		CLEAR_BIT(adev->set_mask, GETSET_POWER_80211);
-+	}
-+
-+	if (adev->set_mask & GETSET_CHANNEL) {
-+		/* channel */
-+		log(L_INIT, "updating channel to: %u\n", adev->channel);
-+		CLEAR_BIT(adev->set_mask, GETSET_CHANNEL);
-+	}
-+
-+	if (adev->set_mask & GETSET_TX) {
-+		/* set Tx */
-+		log(L_INIT, "updating: %s Tx\n",
-+				adev->tx_disabled ? "disable" : "enable");
-+		if (adev->tx_disabled)
-+			acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+		else
-+			acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1);
-+		CLEAR_BIT(adev->set_mask, GETSET_TX);
-+	}
-+
-+	if (adev->set_mask & GETSET_RX) {
-+		/* Enable Rx */
-+		log(L_INIT, "updating: enable Rx on channel: %u\n",
-+				adev->channel);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1);
-+		CLEAR_BIT(adev->set_mask, GETSET_RX);
-+	}
-+
-+	if (adev->set_mask & GETSET_RETRY) {
-+		u8 short_retry[4 + ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN];
-+		u8 long_retry[4 + ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN];
-+
-+		log(L_INIT, "updating short retry limit: %u, long retry limit: %u\n",
-+					adev->short_retry, adev->long_retry);
-+		short_retry[0x4] = adev->short_retry;
-+		long_retry[0x4] = adev->long_retry;
-+		acx_s_configure(adev, &short_retry, ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT);
-+		acx_s_configure(adev, &long_retry, ACX1xx_IE_DOT11_LONG_RETRY_LIMIT);
-+		CLEAR_BIT(adev->set_mask, GETSET_RETRY);
-+	}
-+
-+	if (adev->set_mask & SET_MSDU_LIFETIME) {
-+		u8 xmt_msdu_lifetime[4 + ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN];
-+
-+		log(L_INIT, "updating tx MSDU lifetime: %u\n",
-+					adev->msdu_lifetime);
-+		*(u32 *)&xmt_msdu_lifetime[4] = cpu_to_le32((u32)adev->msdu_lifetime);
-+		acx_s_configure(adev, &xmt_msdu_lifetime, ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME);
-+		CLEAR_BIT(adev->set_mask, SET_MSDU_LIFETIME);
-+	}
-+
-+	if (adev->set_mask & GETSET_REG_DOMAIN) {
-+		log(L_INIT, "updating regulatory domain: 0x%02X\n",
-+					adev->reg_dom_id);
-+		acx_s_set_sane_reg_domain(adev, 1);
-+		CLEAR_BIT(adev->set_mask, GETSET_REG_DOMAIN);
-+	}
-+
-+	if (adev->set_mask & GETSET_MODE) {
-+		adev->ndev->type = (adev->mode == ACX_MODE_MONITOR) ?
-+			adev->monitor_type : ARPHRD_ETHER;
-+
-+		switch (adev->mode) {
-+		case ACX_MODE_3_AP:
-+
-+			acx_lock(adev, flags);
-+			acx_l_sta_list_init(adev);
-+			adev->aid = 0;
-+			adev->ap_client = NULL;
-+			MAC_COPY(adev->bssid, adev->dev_addr);
-+			/* this basically says "we're connected" */
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+			acx_unlock(adev, flags);
-+
-+			acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER);
-+			/* start sending beacons */
-+			acx_s_cmd_join_bssid(adev, adev->bssid);
-+			break;
-+		case ACX_MODE_MONITOR:
-+			acx111_s_feature_on(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER);
-+			/* this stops beacons */
-+			acx_s_cmd_join_bssid(adev, adev->bssid);
-+			/* this basically says "we're connected" */
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+			SET_BIT(adev->set_mask, SET_RXCONFIG|SET_WEP_OPTIONS);
-+			break;
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_2_STA:
-+			acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER);
-+
-+			acx_lock(adev, flags);
-+			adev->aid = 0;
-+			adev->ap_client = NULL;
-+			acx_unlock(adev, flags);
-+
-+			/* we want to start looking for peer or AP */
-+			start_scan = 1;
-+			break;
-+		case ACX_MODE_OFF:
-+			/* TODO: disable RX/TX, stop any scanning activity etc: */
-+			/* adev->tx_disabled = 1; */
-+			/* SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX); */
-+
-+			/* This stops beacons (invalid macmode...) */
-+			acx_s_cmd_join_bssid(adev, adev->bssid);
-+			acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+			break;
-+		}
-+		CLEAR_BIT(adev->set_mask, GETSET_MODE);
-+	}
-+
-+	if (adev->set_mask & SET_RXCONFIG) {
-+		acx_s_initialize_rx_config(adev);
-+		CLEAR_BIT(adev->set_mask, SET_RXCONFIG);
-+	}
-+
-+	if (adev->set_mask & GETSET_RESCAN) {
-+		switch (adev->mode) {
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_2_STA:
-+			start_scan = 1;
-+			break;
-+		}
-+		CLEAR_BIT(adev->set_mask, GETSET_RESCAN);
-+	}
-+
-+	if (adev->set_mask & GETSET_WEP) {
-+		/* encode */
-+
-+		ie_dot11WEPDefaultKeyID_t dkey;
-+#ifdef DEBUG_WEP
-+		struct {
-+			u16 type;
-+			u16 len;
-+			u8  val;
-+		} ACX_PACKED keyindic;
-+#endif
-+		log(L_INIT, "updating WEP key settings\n");
-+
-+		acx_s_set_wepkey(adev);
-+
-+		dkey.KeyID = adev->wep_current_index;
-+		log(L_INIT, "setting WEP key %u as default\n", dkey.KeyID);
-+		acx_s_configure(adev, &dkey, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET);
-+#ifdef DEBUG_WEP
-+		keyindic.val = 3;
-+		acx_s_configure(adev, &keyindic, ACX111_IE_KEY_CHOOSE);
-+#endif
-+		start_scan = 1;
-+		CLEAR_BIT(adev->set_mask, GETSET_WEP);
-+	}
-+
-+	if (adev->set_mask & SET_WEP_OPTIONS) {
-+		acx100_ie_wep_options_t options;
-+		if (IS_ACX111(adev)) {
-+			log(L_DEBUG, "setting WEP Options for acx111 is not supported\n");
-+		} else {
-+			log(L_INIT, "setting WEP Options\n");
-+			acx100_s_init_wep(adev);
-+#if 0
-+			/* let's choose maximum setting: 4 default keys,
-+			 * plus 10 other keys: */
-+			options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10);
-+			/* don't decrypt default key only,
-+			 * don't override decryption: */
-+			options.WEPOption = 0;
-+			if (adev->mode == ACX_MODE_MONITOR) {
-+				/* don't decrypt default key only,
-+				 * override decryption mechanism: */
-+				options.WEPOption = 2;
-+			}
-+
-+			acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS);
-+#endif
-+		}
-+		CLEAR_BIT(adev->set_mask, SET_WEP_OPTIONS);
-+	}
-+
-+	/* Rescan was requested */
-+	if (start_scan) {
-+		switch (adev->mode) {
-+		case ACX_MODE_0_ADHOC:
-+		case ACX_MODE_2_STA:
-+			/* We can avoid clearing list if join code
-+			** will be a bit more clever about not picking
-+			** 'bad' AP over and over again */
-+			acx_lock(adev, flags);
-+			adev->ap_client = NULL;
-+			acx_l_sta_list_init(adev);
-+			acx_set_status(adev, ACX_STATUS_1_SCANNING);
-+			acx_unlock(adev, flags);
-+
-+			acx_s_cmd_start_scan(adev);
-+		}
-+	}
-+
-+	/* debug, rate, and nick don't need any handling */
-+	/* what about sniffing mode?? */
-+
-+	log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X - after update\n",
-+			adev->get_mask, adev->set_mask);
-+
-+/* end: */
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_e_after_interrupt_task
-+*/
-+static int
-+acx_s_recalib_radio(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev)) {
-+		acx111_cmd_radiocalib_t cal;
-+
-+		printk("%s: recalibrating radio\n", adev->ndev->name);
-+		/* automatic recalibration, choose all methods: */
-+		cal.methods = cpu_to_le32(0x8000000f);
-+		/* automatic recalibration every 60 seconds (value in TUs)
-+		 * I wonder what the firmware default here is? */
-+		cal.interval = cpu_to_le32(58594);
-+		return acx_s_issue_cmd_timeo(adev, ACX111_CMD_RADIOCALIB,
-+			&cal, sizeof(cal), CMD_TIMEOUT_MS(100));
-+	} else {
-+		/* On ACX100, we need to recalibrate the radio
-+		 * by issuing a GETSET_TX|GETSET_RX */
-+		if (/* (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0)) &&
-+		    (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0)) && */
-+		    (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1)) &&
-+		    (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1)) )
-+			return OK;
-+		return NOT_OK;
-+	}
-+}
-+
-+static void
-+acx_s_after_interrupt_recalib(acx_device_t *adev)
-+{
-+	int res;
-+
-+	/* this helps with ACX100 at least;
-+	 * hopefully ACX111 also does a
-+	 * recalibration here */
-+
-+	/* clear flag beforehand, since we want to make sure
-+	 * it's cleared; then only set it again on specific circumstances */
-+	CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+
-+	/* better wait a bit between recalibrations to
-+	 * prevent overheating due to torturing the card
-+	 * into working too long despite high temperature
-+	 * (just a safety measure) */
-+	if (adev->recalib_time_last_success
-+	 && time_before(jiffies, adev->recalib_time_last_success
-+					+ RECALIB_PAUSE * 60 * HZ)) {
-+		if (adev->recalib_msg_ratelimit <= 4) {
-+			printk("%s: less than " STRING(RECALIB_PAUSE)
-+				" minutes since last radio recalibration, "
-+				"not recalibrating (maybe card is too hot?)\n",
-+				adev->ndev->name);
-+			adev->recalib_msg_ratelimit++;
-+			if (adev->recalib_msg_ratelimit == 5)
-+				printk("disabling above message until next recalib\n");
-+		}
-+		return;
-+	}
-+
-+	adev->recalib_msg_ratelimit = 0;
-+
-+	/* note that commands sometimes fail (card busy),
-+	 * so only clear flag if we were fully successful */
-+	res = acx_s_recalib_radio(adev);
-+	if (res == OK) {
-+		printk("%s: successfully recalibrated radio\n",
-+						adev->ndev->name);
-+		adev->recalib_time_last_success = jiffies;
-+		adev->recalib_failure_count = 0;
-+	} else {
-+		/* failed: resubmit, but only limited
-+		 * amount of times within some time range
-+		 * to prevent endless loop */
-+
-+		adev->recalib_time_last_success = 0; /* we failed */
-+
-+		/* if some time passed between last
-+		 * attempts, then reset failure retry counter
-+		 * to be able to do next recalib attempt */
-+		if (time_after(jiffies, adev->recalib_time_last_attempt + 5*HZ))
-+			adev->recalib_failure_count = 0;
-+
-+		if (adev->recalib_failure_count < 5) {
-+			/* increment inside only, for speedup of outside path */
-+			adev->recalib_failure_count++;
-+			adev->recalib_time_last_attempt = jiffies;
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+		}
-+	}
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
-+static void
-+acx_e_after_interrupt_task(struct work_struct *work)
-+{
-+	acx_device_t *adev = container_of(work, acx_device_t, after_interrupt_task);
-+#else
-+  static void
-+  acx_e_after_interrupt_task(void *data)
-+  {
-+  	struct net_device *ndev = (struct net_device*)data;
-+  	acx_device_t *adev = ndev2adev(ndev);
-+#endif
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	if (!adev->after_interrupt_jobs)
-+		goto end; /* no jobs to do */
-+
-+#if TX_CLEANUP_IN_SOFTIRQ
-+	/* can happen only on PCI */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_TX_CLEANUP) {
-+		acx_lock(adev, flags);
-+		acxpci_l_clean_txdesc(adev);
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_TX_CLEANUP);
-+		acx_unlock(adev, flags);
-+	}
-+#endif
-+	/* we see lotsa tx errors */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_RADIO_RECALIB) {
-+		acx_s_after_interrupt_recalib(adev);
-+	}
-+
-+	/* a poor interrupt code wanted to do update_card_settings() */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_UPDATE_CARD_CFG) {
-+		if (ACX_STATE_IFACE_UP & adev->dev_state_mask)
-+			acx_s_update_card_settings(adev);
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+	}
-+
-+	/* 1) we detected that no Scan_Complete IRQ came from fw, or
-+	** 2) we found too many STAs */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_STOP_SCAN) {
-+		log(L_IRQ, "sending a stop scan cmd...\n");
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_STOP_SCAN, NULL, 0);
-+		/* HACK: set the IRQ bit, since we won't get a
-+		 * scan complete IRQ any more on ACX111 (works on ACX100!),
-+		 * since _we_, not a fw, have stopped the scan */
-+		SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_STOP_SCAN);
-+	}
-+
-+	/* either fw sent Scan_Complete or we detected that
-+	** no Scan_Complete IRQ came from fw. Finish scanning,
-+	** pick join partner if any */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_COMPLETE_SCAN) {
-+		if (adev->status == ACX_STATUS_1_SCANNING) {
-+			if (OK != acx_s_complete_scan(adev)) {
-+				SET_BIT(adev->after_interrupt_jobs,
-+					ACX_AFTER_IRQ_RESTART_SCAN);
-+			}
-+		} else {
-+			/* + scan kills current join status - restore it
-+			**   (do we need it for STA?) */
-+			/* + does it happen only with active scans?
-+			**   active and passive scans? ALL scans including
-+			**   background one? */
-+			/* + was not verified that everything is restored
-+			**   (but at least we start to emit beacons again) */
-+			switch (adev->mode) {
-+			case ACX_MODE_0_ADHOC:
-+			case ACX_MODE_3_AP:
-+				log(L_IRQ, "redoing cmd_join_bssid() after scan\n");
-+				acx_s_cmd_join_bssid(adev, adev->bssid);
-+			}
-+		}
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_COMPLETE_SCAN);
-+	}
-+
-+	/* STA auth or assoc timed out, start over again */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_RESTART_SCAN) {
-+		log(L_IRQ, "sending a start_scan cmd...\n");
-+		acx_s_cmd_start_scan(adev);
-+		CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_RESTART_SCAN);
-+	}
-+
-+	/* whee, we got positive assoc response! 8) */
-+	if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_ASSOCIATE) {
-+		acx_ie_generic_t pdr;
-+		/* tiny race window exists, checking that we still a STA */
-+		switch (adev->mode) {
-+		case ACX_MODE_2_STA:
-+			pdr.m.aid = cpu_to_le16(adev->aid);
-+			acx_s_configure(adev, &pdr, ACX1xx_IE_ASSOC_ID);
-+			acx_set_status(adev, ACX_STATUS_4_ASSOCIATED);
-+			log(L_ASSOC|L_DEBUG, "ASSOCIATED!\n");
-+			CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_ASSOCIATE);
-+		}
-+	}
-+end:
-+	acx_sem_unlock(adev);
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_schedule_task
-+**
-+** Schedule the call of the after_interrupt method after leaving
-+** the interrupt context.
-+*/
-+void
-+acx_schedule_task(acx_device_t *adev, unsigned int set_flag)
-+{
-+	SET_BIT(adev->after_interrupt_jobs, set_flag);
-+	SCHEDULE_WORK(&adev->after_interrupt_task);
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acx_init_task_scheduler(acx_device_t *adev)
-+{
-+	/* configure task scheduler */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
-+	INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task);
-+#else
-+	INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task,
-+			adev->ndev);
-+#endif
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_start
-+*/
-+void
-+acx_s_start(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+
-+	/*
-+	 * Ok, now we do everything that can possibly be done with ioctl
-+	 * calls to make sure that when it was called before the card
-+	 * was up we get the changes asked for
-+	 */
-+
-+	SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST|GETSET_WEP
-+		|GETSET_TXPOWER|GETSET_ANTENNA|GETSET_ED_THRESH|GETSET_CCA
-+		|GETSET_REG_DOMAIN|GETSET_MODE|GETSET_CHANNEL
-+		|GETSET_TX|GETSET_RX|GETSET_STATION_ID);
-+
-+	log(L_INIT, "updating initial settings on iface activation\n");
-+	acx_s_update_card_settings(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_update_capabilities
-+*/
-+void
-+acx_update_capabilities(acx_device_t *adev)
-+{
-+	u16 cap = 0;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_3_AP:
-+		SET_BIT(cap, WF_MGMT_CAP_ESS); break;
-+	case ACX_MODE_0_ADHOC:
-+		SET_BIT(cap, WF_MGMT_CAP_IBSS); break;
-+	/* other types of stations do not emit beacons */
-+	}
-+
-+	if (adev->wep_restricted) {
-+		SET_BIT(cap, WF_MGMT_CAP_PRIVACY);
-+	}
-+	if (adev->cfgopt_dot11ShortPreambleOption) {
-+		SET_BIT(cap, WF_MGMT_CAP_SHORT);
-+	}
-+	if (adev->cfgopt_dot11PBCCOption) {
-+		SET_BIT(cap, WF_MGMT_CAP_PBCC);
-+	}
-+	if (adev->cfgopt_dot11ChannelAgility) {
-+		SET_BIT(cap, WF_MGMT_CAP_AGILITY);
-+	}
-+	log(L_DEBUG, "caps updated from 0x%04X to 0x%04X\n",
-+				adev->capabilities, cap);
-+	adev->capabilities = cap;
-+}
-+
-+/***********************************************************************
-+** Common function to parse ALL configoption struct formats
-+** (ACX100 and ACX111; FIXME: how to make it work with ACX100 USB!?!?).
-+** FIXME: logging should be removed here and added to a /proc file instead
-+*/
-+void
-+acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg)
-+{
-+	const u8 *pEle;
-+	int i;
-+	int is_acx111 = IS_ACX111(adev);
-+
-+	if (acx_debug & L_DEBUG) {
-+		printk("configoption struct content:\n");
-+		acx_dump_bytes(pcfg, sizeof(*pcfg));
-+	}
-+
-+	if (( is_acx111 && (adev->eeprom_version == 5))
-+	||  (!is_acx111 && (adev->eeprom_version == 4))
-+	||  (!is_acx111 && (adev->eeprom_version == 5))) {
-+		/* these versions are known to be supported */
-+	} else {
-+		printk("unknown chip and EEPROM version combination (%s, v%d), "
-+			"don't know how to parse config options yet. "
-+			"Please report\n", is_acx111 ? "ACX111" : "ACX100",
-+			adev->eeprom_version);
-+		return;
-+	}
-+
-+	/* first custom-parse the first part which has chip-specific layout */
-+
-+	pEle = (const u8 *) pcfg;
-+
-+	pEle += 4; /* skip (type,len) header */
-+
-+	memcpy(adev->cfgopt_NVSv, pEle, sizeof(adev->cfgopt_NVSv));
-+	pEle += sizeof(adev->cfgopt_NVSv);
-+
-+	if (is_acx111) {
-+		adev->cfgopt_NVS_vendor_offs = le16_to_cpu(*(u16 *)pEle);
-+		pEle += sizeof(adev->cfgopt_NVS_vendor_offs);
-+
-+		adev->cfgopt_probe_delay = 200; /* good default value? */
-+		pEle += 2; /* FIXME: unknown, value 0x0001 */
-+	} else {
-+		memcpy(adev->cfgopt_MAC, pEle, sizeof(adev->cfgopt_MAC));
-+		pEle += sizeof(adev->cfgopt_MAC);
-+
-+		adev->cfgopt_probe_delay = le16_to_cpu(*(u16 *)pEle);
-+		pEle += sizeof(adev->cfgopt_probe_delay);
-+		if ((adev->cfgopt_probe_delay < 100) || (adev->cfgopt_probe_delay > 500)) {
-+			printk("strange probe_delay value %d, "
-+				"tweaking to 200\n", adev->cfgopt_probe_delay);
-+			adev->cfgopt_probe_delay = 200;
-+		}
-+	}
-+
-+	adev->cfgopt_eof_memory = le32_to_cpu(*(u32 *)pEle);
-+	pEle += sizeof(adev->cfgopt_eof_memory);
-+
-+	printk("NVS_vendor_offs:%04X probe_delay:%d eof_memory:%d\n",
-+		adev->cfgopt_NVS_vendor_offs,
-+		adev->cfgopt_probe_delay,
-+		adev->cfgopt_eof_memory);
-+
-+	adev->cfgopt_dot11CCAModes = *pEle++;
-+	adev->cfgopt_dot11Diversity = *pEle++;
-+	adev->cfgopt_dot11ShortPreambleOption = *pEle++;
-+	adev->cfgopt_dot11PBCCOption = *pEle++;
-+	adev->cfgopt_dot11ChannelAgility = *pEle++;
-+	adev->cfgopt_dot11PhyType = *pEle++;
-+	adev->cfgopt_dot11TempType = *pEle++;
-+	printk("CCAModes:%02X Diversity:%02X ShortPreOpt:%02X "
-+		"PBCC:%02X ChanAgil:%02X PHY:%02X Temp:%02X\n",
-+		adev->cfgopt_dot11CCAModes,
-+		adev->cfgopt_dot11Diversity,
-+		adev->cfgopt_dot11ShortPreambleOption,
-+		adev->cfgopt_dot11PBCCOption,
-+		adev->cfgopt_dot11ChannelAgility,
-+		adev->cfgopt_dot11PhyType,
-+		adev->cfgopt_dot11TempType);
-+
-+	/* then use common parsing for next part which has common layout */
-+
-+	pEle++; /* skip table_count (6) */
-+
-+	if (IS_MEM(adev) && IS_ACX100(adev))
-+	{
-+	/*
-+	   * For iPaq hx4700 Generic Slave F/W 1.10.7.K.  I'm not sure if these
-+	   * 4 extra bytes are before the dot11 things above or after, so I'm just
-+	   * going to guess after.  If someone sees these aren't reasonable numbers,
-+	   * please fix this.
-+	 * The area from which the dot11 values above are read contains:
-+	 * 04 01 01 01 00 05 01 06 00 02 01 02
-+	 * the 8 dot11 reads above take care of 8 of them, but which 8...
-+	 */
-+	pEle += 4;
-+	}
-+
-+	adev->cfgopt_antennas.type = pEle[0];
-+	adev->cfgopt_antennas.len = pEle[1];
-+	printk("AntennaID:%02X Len:%02X Data:",
-+			adev->cfgopt_antennas.type, adev->cfgopt_antennas.len);
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_antennas.list[i] = pEle[i+2];
-+		printk("%02X ", pEle[i+2]);
-+	}
-+	printk("\n");
-+
-+	pEle += pEle[1] + 2;
-+	adev->cfgopt_power_levels.type = pEle[0];
-+	adev->cfgopt_power_levels.len = pEle[1];
-+	printk("PowerLevelID:%02X Len:%02X Data:",
-+		adev->cfgopt_power_levels.type, adev->cfgopt_power_levels.len);
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_power_levels.list[i] = le16_to_cpu(*(u16 *)&pEle[i*2+2]);
-+		printk("%04X ", adev->cfgopt_power_levels.list[i]);
-+	}
-+	printk("\n");
-+
-+	pEle += pEle[1]*2 + 2;
-+	adev->cfgopt_data_rates.type = pEle[0];
-+	adev->cfgopt_data_rates.len = pEle[1];
-+	printk("DataRatesID:%02X Len:%02X Data:",
-+		adev->cfgopt_data_rates.type, adev->cfgopt_data_rates.len);
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_data_rates.list[i] = pEle[i+2];
-+		printk("%02X ", pEle[i+2]);
-+	}
-+	printk("\n");
-+
-+	pEle += pEle[1] + 2;
-+	adev->cfgopt_domains.type = pEle[0];
-+	adev->cfgopt_domains.len = pEle[1];
-+	if (IS_MEM(adev) && IS_ACX100(adev))
-+	{
-+	/*
-+	   * For iPaq hx4700 Generic Slave F/W 1.10.7.K.
-+	 * There's an extra byte between this structure and the next
-+	 * that is not accounted for with this structure's length.  It's
-+	 * most likely a bug in the firmware, but we can fix it here
-+	 * by bumping the length of this field by 1.
-+	 */
-+	adev->cfgopt_domains.len++;
-+	}
-+	printk("DomainID:%02X Len:%02X Data:",
-+			adev->cfgopt_domains.type, adev->cfgopt_domains.len);
-+	for (i = 0; i < adev->cfgopt_domains.len; i++) {
-+		adev->cfgopt_domains.list[i] = pEle[i+2];
-+		printk("%02X ", pEle[i+2]);
-+	}
-+	printk("\n");
-+
-+	pEle += adev->cfgopt_domains.len + 2;
-+
-+	adev->cfgopt_product_id.type = pEle[0];
-+	adev->cfgopt_product_id.len = pEle[1];
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_product_id.list[i] = pEle[i+2];
-+	}
-+	printk("ProductID:%02X Len:%02X Data:%.*s\n",
-+		adev->cfgopt_product_id.type, adev->cfgopt_product_id.len,
-+		adev->cfgopt_product_id.len, (char *)adev->cfgopt_product_id.list);
-+
-+	pEle += pEle[1] + 2;
-+	adev->cfgopt_manufacturer.type = pEle[0];
-+	adev->cfgopt_manufacturer.len = pEle[1];
-+	for (i = 0; i < pEle[1]; i++) {
-+		adev->cfgopt_manufacturer.list[i] = pEle[i+2];
-+	}
-+	printk("ManufacturerID:%02X Len:%02X Data:%.*s\n",
-+		adev->cfgopt_manufacturer.type, adev->cfgopt_manufacturer.len,
-+		adev->cfgopt_manufacturer.len, (char *)adev->cfgopt_manufacturer.list);
-+/*
-+	printk("EEPROM part:\n");
-+	for (i=0; i<58; i++) {
-+		printk("%02X =======>  0x%02X\n",
-+			i, (u8 *)adev->cfgopt_NVSv[i-2]);
-+	}
-+*/
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int __init
-+acx_e_init_module(void)
-+{
-+	int r1,r2,r3,r4;
-+
-+	acx_struct_size_check();
-+
-+	printk("acx: this driver is still EXPERIMENTAL\n"
-+		"acx: reading README file and/or Craig's HOWTO is "
-+		"recommended, visit http://acx100.sf.net in case "
-+		"of further questions/discussion\n");
-+
-+#if defined(CONFIG_ACX_PCI)
-+	r1 = acxpci_e_init_module();
-+#else
-+	r1 = -EINVAL;
-+#endif
-+#if defined(CONFIG_ACX_MEM)
-+	r2 = acxmem_e_init_module();
-+#else
-+	r2 = -EINVAL;
-+#endif
-+#if defined(CONFIG_ACX_USB)
-+	r3 = acxusb_e_init_module();
-+#else
-+	r3 = -EINVAL;
-+#endif
-+#if defined(CONFIG_ACX_CS)
-+	r4 = acx_cs_init();
-+#else
-+	r4 = -EINVAL;
-+#endif
-+	if (r2 && r1  && r3 && r4) { /* all failed! */
-+	  if (r3 || r1)
-+		return r3 ? r3 : r1;
-+	  else
-+	    return r2;
-+	}
-+	/* return success if at least one succeeded */
-+	return 0;
-+
-+}
-+
-+static void __exit
-+acx_e_cleanup_module(void)
-+{
-+#if defined(CONFIG_ACX_PCI)
-+	acxpci_e_cleanup_module();
-+#endif
-+#if defined(CONFIG_ACX_MEM)
-+	acxmem_e_cleanup_module();
-+#endif
-+#if defined(CONFIG_ACX_USB)
-+	acxusb_e_cleanup_module();
-+#endif
-+#if defined(CONFIG_ACX_CS)
-+	acx_cs_cleanup();
-+#endif
-+}
-+
-+module_init(acx_e_init_module)
-+module_exit(acx_e_cleanup_module)
-Index: linux-2.6.23/drivers/net/wireless/acx/conv.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/conv.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,504 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/skbuff.h>
-+#include <linux/if_arp.h>
-+#include <linux/etherdevice.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+** proto_is_stt
-+**
-+** Searches the 802.1h Selective Translation Table for a given
-+** protocol.
-+**
-+** prottype - protocol number (in host order) to search for.
-+**
-+** Returns:
-+**	1 - if the table is empty or a match is found.
-+**	0 - if the table is non-empty and a match is not found.
-+**
-+** Based largely on p80211conv.c of the linux-wlan-ng project
-+*/
-+static inline int
-+proto_is_stt(unsigned int proto)
-+{
-+	/* Always return found for now.  This is the behavior used by the */
-+	/* Zoom Win95 driver when 802.1h mode is selected */
-+	/* TODO: If necessary, add an actual search we'll probably
-+		 need this to match the CMAC's way of doing things.
-+		 Need to do some testing to confirm.
-+	*/
-+
-+	if (proto == 0x80f3)  /* APPLETALK */
-+		return 1;
-+
-+	return 0;
-+/*	return ((prottype == ETH_P_AARP) || (prottype == ETH_P_IPX)); */
-+}
-+
-+/* Helpers */
-+
-+static inline void
-+store_llc_snap(struct wlan_llc *llc)
-+{
-+	llc->dsap = 0xaa;	/* SNAP, see IEEE 802 */
-+	llc->ssap = 0xaa;
-+	llc->ctl = 0x03;
-+}
-+static inline int
-+llc_is_snap(const struct wlan_llc *llc)
-+{
-+	return (llc->dsap == 0xaa)
-+	&& (llc->ssap == 0xaa)
-+	&& (llc->ctl == 0x03);
-+}
-+static inline void
-+store_oui_rfc1042(struct wlan_snap *snap)
-+{
-+	snap->oui[0] = 0;
-+	snap->oui[1] = 0;
-+	snap->oui[2] = 0;
-+}
-+static inline int
-+oui_is_rfc1042(const struct wlan_snap *snap)
-+{
-+	return (snap->oui[0] == 0)
-+	&& (snap->oui[1] == 0)
-+	&& (snap->oui[2] == 0);
-+}
-+static inline void
-+store_oui_8021h(struct wlan_snap *snap)
-+{
-+	snap->oui[0] = 0;
-+	snap->oui[1] = 0;
-+	snap->oui[2] = 0xf8;
-+}
-+static inline int
-+oui_is_8021h(const struct wlan_snap *snap)
-+{
-+	return (snap->oui[0] == 0)
-+	&& (snap->oui[1] == 0)
-+	&& (snap->oui[2] == 0xf8);
-+}
-+
-+
-+/***********************************************************************
-+** acx_ether_to_txbuf
-+**
-+** Uses the contents of the ether frame to build the elements of
-+** the 802.11 frame.
-+**
-+** We don't actually set up the frame header here.  That's the
-+** MAC's job.  We're only handling conversion of DIXII or 802.3+LLC
-+** frames to something that works with 802.11.
-+**
-+** Based largely on p80211conv.c of the linux-wlan-ng project
-+*/
-+int
-+acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb)
-+{
-+	struct wlan_hdr_a3 *w_hdr;
-+	struct wlan_ethhdr *e_hdr;
-+	struct wlan_llc *e_llc;
-+	struct wlan_snap *e_snap;
-+	const u8 *a1, *a3;
-+	int header_len, payload_len = -1;
-+	/* protocol type or data length, depending on whether
-+	 * DIX or 802.3 ethernet format */
-+	u16 proto;
-+	u16 fc;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!skb->len)) {
-+		log(L_DEBUG, "zero-length skb!\n");
-+		goto end;
-+	}
-+
-+	w_hdr = (struct wlan_hdr_a3*)txbuf;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_MONITOR:
-+		/* NB: one day we might want to play with DESC_CTL2_FCS
-+		** Will need to stop doing "- WLAN_FCS_LEN" here then */
-+		if (unlikely(skb->len >= WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_FCS_LEN)) {
-+			printk("%s: can't tx oversized frame (%d bytes)\n",
-+				adev->ndev->name, skb->len);
-+			goto end;
-+		}
-+		memcpy(w_hdr, skb->data, skb->len);
-+		payload_len = skb->len;
-+		goto end;
-+	}
-+
-+	/* step 1: classify ether frame, DIX or 802.3? */
-+	e_hdr = (wlan_ethhdr_t *)skb->data;
-+	proto = ntohs(e_hdr->type);
-+	if (proto <= 1500) {
-+		log(L_DEBUG, "tx: 802.3 len: %d\n", skb->len);
-+		/* codes <= 1500 reserved for 802.3 lengths */
-+		/* it's 802.3, pass ether payload unchanged, */
-+		/* trim off ethernet header and copy payload to txdesc */
-+		header_len = WLAN_HDR_A3_LEN;
-+	} else {
-+		/* it's DIXII, time for some conversion */
-+		/* Create 802.11 packet. Header also contains llc and snap. */
-+
-+		log(L_DEBUG, "tx: DIXII len: %d\n", skb->len);
-+
-+		/* size of header is 802.11 header + llc + snap */
-+		header_len = WLAN_HDR_A3_LEN + sizeof(wlan_llc_t) + sizeof(wlan_snap_t);
-+		/* llc is located behind the 802.11 header */
-+		e_llc = (wlan_llc_t*)(w_hdr + 1);
-+		/* snap is located behind the llc */
-+		e_snap = (wlan_snap_t*)(e_llc + 1);
-+
-+		/* setup the LLC header */
-+		store_llc_snap(e_llc);
-+
-+		/* setup the SNAP header */
-+		e_snap->type = htons(proto);
-+		if (proto_is_stt(proto)) {
-+			store_oui_8021h(e_snap);
-+		} else {
-+			store_oui_rfc1042(e_snap);
-+		}
-+	}
-+	/* trim off ethernet header and copy payload to txbuf */
-+	payload_len = skb->len - sizeof(wlan_ethhdr_t);
-+	/* TODO: can we just let acx DMA payload from skb instead? */
-+	memcpy((u8*)txbuf + header_len, skb->data + sizeof(wlan_ethhdr_t), payload_len);
-+	payload_len += header_len;
-+
-+	/* Set up the 802.11 header */
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+		fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi);
-+		a1 = e_hdr->daddr;
-+		a3 = adev->bssid;
-+		break;
-+	case ACX_MODE_2_STA:
-+		fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_TODSi);
-+		a1 = adev->bssid;
-+		a3 = e_hdr->daddr;
-+		break;
-+	case ACX_MODE_3_AP:
-+		fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_FROMDSi);
-+		a1 = e_hdr->daddr;
-+		a3 = e_hdr->saddr;
-+		break;
-+	default:
-+		printk("%s: error - converting eth to wlan in unknown mode\n",
-+				adev->ndev->name);
-+		payload_len = -1;
-+		goto end;
-+	}
-+	if (adev->wep_enabled)
-+		SET_BIT(fc, WF_FC_ISWEPi);
-+
-+	w_hdr->fc = fc;
-+	w_hdr->dur = 0;
-+	MAC_COPY(w_hdr->a1, a1);
-+	MAC_COPY(w_hdr->a2, adev->dev_addr);
-+	MAC_COPY(w_hdr->a3, a3);
-+	w_hdr->seq = 0;
-+
-+#ifdef DEBUG_CONVERT
-+	if (acx_debug & L_DATA) {
-+		printk("original eth frame [%d]: ", skb->len);
-+		acx_dump_bytes(skb->data, skb->len);
-+		printk("802.11 frame [%d]: ", payload_len);
-+		acx_dump_bytes(w_hdr, payload_len);
-+	}
-+#endif
-+
-+end:
-+	FN_EXIT1(payload_len);
-+	return payload_len;
-+}
-+
-+
-+/***********************************************************************
-+** acx_rxbuf_to_ether
-+**
-+** Uses the contents of a received 802.11 frame to build an ether
-+** frame.
-+**
-+** This function extracts the src and dest address from the 802.11
-+** frame to use in the construction of the eth frame.
-+**
-+** Based largely on p80211conv.c of the linux-wlan-ng project
-+*/
-+struct sk_buff*
-+acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf)
-+{
-+	struct wlan_hdr *w_hdr;
-+	struct wlan_ethhdr *e_hdr;
-+	struct wlan_llc *e_llc;
-+	struct wlan_snap *e_snap;
-+	struct sk_buff *skb;
-+	const u8 *daddr;
-+	const u8 *saddr;
-+	const u8 *e_payload;
-+	int buflen, payload_length;
-+	unsigned int payload_offset, mtu;
-+	u16 fc;
-+
-+	FN_ENTER;
-+
-+	/* This looks complex because it must handle possible
-+	** phy header in rxbuff */
-+	w_hdr = acx_get_wlan_hdr(adev, rxbuf);
-+	payload_offset = WLAN_HDR_A3_LEN; /* it is relative to w_hdr */
-+	payload_length = RXBUF_BYTES_USED(rxbuf) /* entire rxbuff... */
-+		- ((u8*)w_hdr - (u8*)rxbuf) /* minus space before 802.11 frame */
-+		- WLAN_HDR_A3_LEN; /* minus 802.11 header */
-+
-+	/* setup some vars for convenience */
-+	fc = w_hdr->fc;
-+	switch (WF_FC_FROMTODSi & fc) {
-+	case 0:
-+		daddr = w_hdr->a1;
-+		saddr = w_hdr->a2;
-+		break;
-+	case WF_FC_FROMDSi:
-+		daddr = w_hdr->a1;
-+		saddr = w_hdr->a3;
-+		break;
-+	case WF_FC_TODSi:
-+		daddr = w_hdr->a3;
-+		saddr = w_hdr->a2;
-+		break;
-+	default: /* WF_FC_FROMTODSi */
-+		payload_offset += (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN);
-+		payload_length -= (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN);
-+		daddr = w_hdr->a3;
-+		saddr = w_hdr->a4;
-+	}
-+
-+	if ((WF_FC_ISWEPi & fc) && IS_ACX100(adev)) {
-+		/* chop off the IV+ICV WEP header and footer */
-+		log(L_DATA|L_DEBUG, "rx: WEP packet, "
-+			"chopping off IV and ICV\n");
-+		payload_offset += WLAN_WEP_IV_LEN;
-+		payload_length -= WLAN_WEP_IV_LEN + WLAN_WEP_ICV_LEN;
-+	}
-+
-+	if (unlikely(payload_length < 0)) {
-+		printk("%s: rx frame too short, ignored\n", adev->ndev->name);
-+		goto ret_null;
-+	}
-+
-+	e_hdr = (wlan_ethhdr_t*) ((u8*) w_hdr + payload_offset);
-+	e_llc = (wlan_llc_t*) e_hdr;
-+	e_snap = (wlan_snap_t*) (e_llc + 1);
-+	mtu = adev->ndev->mtu;
-+	e_payload = (u8*) (e_snap + 1);
-+
-+	log(L_DATA, "rx: payload_offset %d, payload_length %d\n",
-+		payload_offset, payload_length);
-+	log(L_XFER|L_DATA,
-+		"rx: frame info: llc=%02X%02X%02X "
-+		"snap.oui=%02X%02X%02X snap.type=%04X\n",
-+		e_llc->dsap, e_llc->ssap, e_llc->ctl,
-+		e_snap->oui[0],	e_snap->oui[1], e_snap->oui[2],
-+		ntohs(e_snap->type));
-+
-+	/* Test for the various encodings */
-+	if ((payload_length >= sizeof(wlan_ethhdr_t))
-+	 && ((e_llc->dsap != 0xaa) || (e_llc->ssap != 0xaa))
-+	 && (   (mac_is_equal(daddr, e_hdr->daddr))
-+	     || (mac_is_equal(saddr, e_hdr->saddr))
-+	    )
-+	) {
-+	/* 802.3 Encapsulated: */
-+	/* wlan frame body contains complete eth frame (header+body) */
-+		log(L_DEBUG|L_DATA, "rx: 802.3 ENCAP len=%d\n", payload_length);
-+
-+		if (unlikely(payload_length > (mtu + ETH_HLEN))) {
-+			printk("%s: rx: ENCAP frame too large (%d > %d)\n",
-+				adev->ndev->name,
-+				payload_length, mtu + ETH_HLEN);
-+			goto ret_null;
-+		}
-+
-+		/* allocate space and setup host buffer */
-+		buflen = payload_length;
-+		/* Attempt to align IP header (14 bytes eth header + 2 = 16) */
-+		skb = dev_alloc_skb(buflen + 2);
-+		if (unlikely(!skb))
-+			goto no_skb;
-+		skb_reserve(skb, 2);
-+		skb_put(skb, buflen);		/* make room */
-+
-+		/* now copy the data from the 80211 frame */
-+		memcpy(skb->data, e_hdr, payload_length);
-+
-+	} else if ( (payload_length >= sizeof(wlan_llc_t)+sizeof(wlan_snap_t))
-+		 && llc_is_snap(e_llc) ) {
-+	/* wlan frame body contains: AA AA 03 ... (it's a SNAP) */
-+
-+		if ( !oui_is_rfc1042(e_snap)
-+		 || (proto_is_stt(ieee2host16(e_snap->type)) /* && (ethconv == WLAN_ETHCONV_8021h) */)) {
-+			log(L_DEBUG|L_DATA, "rx: SNAP+RFC1042 len=%d\n", payload_length);
-+	/* wlan frame body contains: AA AA 03 !(00 00 00) ... -or- */
-+	/* wlan frame body contains: AA AA 03 00 00 00 0x80f3 ... */
-+	/* build eth hdr, type = len, copy AA AA 03... as eth body */
-+			/* it's a SNAP + RFC1042 frame && protocol is in STT */
-+
-+			if (unlikely(payload_length > mtu)) {
-+				printk("%s: rx: SNAP frame too large (%d > %d)\n",
-+					adev->ndev->name,
-+					payload_length, mtu);
-+				goto ret_null;
-+			}
-+
-+			/* allocate space and setup host buffer */
-+			buflen = payload_length + ETH_HLEN;
-+			skb = dev_alloc_skb(buflen + 2);
-+			if (unlikely(!skb))
-+				goto no_skb;
-+			skb_reserve(skb, 2);
-+			skb_put(skb, buflen);		/* make room */
-+
-+			/* create 802.3 header */
-+			e_hdr = (wlan_ethhdr_t*) skb->data;
-+			MAC_COPY(e_hdr->daddr, daddr);
-+			MAC_COPY(e_hdr->saddr, saddr);
-+			e_hdr->type = htons(payload_length);
-+
-+			/* Now copy the data from the 80211 frame.
-+			   Make room in front for the eth header, and keep the
-+			   llc and snap from the 802.11 payload */
-+			memcpy(skb->data + ETH_HLEN,
-+					e_llc, payload_length);
-+
-+		} else {
-+	/* wlan frame body contains: AA AA 03 00 00 00 [type] [tail] */
-+	/* build eth hdr, type=[type], copy [tail] as eth body */
-+			log(L_DEBUG|L_DATA, "rx: 802.1h/RFC1042 len=%d\n",
-+				payload_length);
-+			/* it's an 802.1h frame (an RFC1042 && protocol is not in STT) */
-+			/* build a DIXII + RFC894 */
-+
-+			payload_length -= sizeof(wlan_llc_t) + sizeof(wlan_snap_t);
-+			if (unlikely(payload_length > mtu)) {
-+				printk("%s: rx: DIXII frame too large (%d > %d)\n",
-+					adev->ndev->name,
-+					payload_length,	mtu);
-+				goto ret_null;
-+			}
-+
-+			/* allocate space and setup host buffer */
-+			buflen = payload_length + ETH_HLEN;
-+			skb = dev_alloc_skb(buflen + 2);
-+			if (unlikely(!skb))
-+				goto no_skb;
-+			skb_reserve(skb, 2);
-+			skb_put(skb, buflen);		/* make room */
-+
-+			/* create 802.3 header */
-+			e_hdr = (wlan_ethhdr_t *) skb->data;
-+			MAC_COPY(e_hdr->daddr, daddr);
-+			MAC_COPY(e_hdr->saddr, saddr);
-+			e_hdr->type = e_snap->type;
-+
-+			/* Now copy the data from the 80211 frame.
-+			   Make room in front for the eth header, and cut off the
-+			   llc and snap from the 802.11 payload */
-+			memcpy(skb->data + ETH_HLEN,
-+					e_payload, payload_length);
-+		}
-+
-+	} else {
-+		log(L_DEBUG|L_DATA, "rx: NON-ENCAP len=%d\n", payload_length);
-+	/* build eth hdr, type=len, copy wlan body as eth body */
-+		/* any NON-ENCAP */
-+		/* it's a generic 80211+LLC or IPX 'Raw 802.3' */
-+		/* build an 802.3 frame */
-+
-+		if (unlikely(payload_length > mtu)) {
-+			printk("%s: rx: OTHER frame too large (%d > %d)\n",
-+				adev->ndev->name, payload_length, mtu);
-+			goto ret_null;
-+		}
-+
-+		/* allocate space and setup host buffer */
-+		buflen = payload_length + ETH_HLEN;
-+		skb = dev_alloc_skb(buflen + 2);
-+		if (unlikely(!skb))
-+			goto no_skb;
-+		skb_reserve(skb, 2);
-+		skb_put(skb, buflen);		/* make room */
-+
-+		/* set up the 802.3 header */
-+		e_hdr = (wlan_ethhdr_t *) skb->data;
-+		MAC_COPY(e_hdr->daddr, daddr);
-+		MAC_COPY(e_hdr->saddr, saddr);
-+		e_hdr->type = htons(payload_length);
-+
-+		/* now copy the data from the 80211 frame */
-+		memcpy(skb->data + ETH_HLEN, e_llc, payload_length);
-+	}
-+
-+	skb->dev = adev->ndev;
-+	skb->protocol = eth_type_trans(skb, adev->ndev);
-+
-+#ifdef DEBUG_CONVERT
-+	if (acx_debug & L_DATA) {
-+		int len = RXBUF_BYTES_RCVD(adev, rxbuf);
-+		printk("p802.11 frame [%d]: ", len);
-+		acx_dump_bytes(w_hdr, len);
-+		printk("eth frame [%d]: ", skb->len);
-+		acx_dump_bytes(skb->data, skb->len);
-+	}
-+#endif
-+
-+	FN_EXIT0;
-+	return skb;
-+
-+no_skb:
-+	printk("%s: rx: no memory for skb (%d bytes)\n",
-+			adev->ndev->name, buflen + 2);
-+ret_null:
-+	FN_EXIT1((int)NULL);
-+	return NULL;
-+}
-Index: linux-2.6.23/drivers/net/wireless/acx/cs.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/cs.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,5703 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+**
-+** Slave memory interface support:
-+**
-+** Todd Blumer - SDG Systems
-+** Bill Reese - HP
-+** Eric McCorkle - Shadowsun
-+**
-+** CF support, (c) Fabrice Crohas, Paul Sokolovsky
-+*/
-+#define ACX_MEM 1
-+
-+/*
-+ * non-zero makes it dump the ACX memory to the console then
-+ * panic when you cat /proc/driver/acx_wlan0_diag
-+ */
-+#define DUMP_MEM_DEFINED 1
-+
-+#define DUMP_MEM_DURING_DIAG 0
-+#define DUMP_IF_SLOW 0
-+
-+#define PATCH_AROUND_BAD_SPOTS 1
-+#define HX4700_FIRMWARE_CHECKSUM 0x0036862e
-+#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+
-+/* Linux 2.6.18+ uses <linux/utsrelease.h> */
-+#ifndef UTS_RELEASE
-+#include <linux/utsrelease.h>
-+#endif
-+
-+#include <linux/compiler.h> /* required for Lx 2.6.8 ?? */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/skbuff.h>
-+#include <linux/slab.h>
-+#include <linux/if_arp.h>
-+#include <linux/irq.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+#include <linux/netdevice.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm.h>
-+#include <linux/vmalloc.h>
-+#include <linux/delay.h>
-+#include <linux/workqueue.h>
-+#include <linux/inetdevice.h>
-+
-+#define PCMCIA_DEBUG 1
-+
-+/*
-+   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-+   you do not define PCMCIA_DEBUG at all, all the debug code will be
-+   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-+   be present but disabled -- but it can then be enabled for specific
-+   modules at load time with a 'pc_debug=#' option to insmod.
-+	
-+*/
-+#include <pcmcia/cs_types.h>
-+#include <pcmcia/cs.h>
-+#include <pcmcia/cistpl.h>
-+#include <pcmcia/cisreg.h>
-+#include <pcmcia/ds.h>
-+#include "acx.h"
-+#include "acx_hw.h"
-+
-+#ifdef PCMCIA_DEBUG
-+static int pc_debug = PCMCIA_DEBUG;
-+module_param(pc_debug, int, 0);
-+static char *version = "$Revision: 1.10 $";
-+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-+#else
-+#define DEBUG(n, args...)
-+#endif
-+
-+
-+static win_req_t memwin;
-+
-+typedef struct local_info_t {
-+        dev_node_t      node;
-+        struct net_device *ndev;
-+} local_info_t;
-+
-+static struct net_device *resume_ndev;
-+
-+
-+/***********************************************************************
-+*/
-+
-+#define CARD_EEPROM_ID_SIZE 6
-+
-+#include <asm/io.h>
-+
-+#define REG_ACX_VENDOR_ID 0x900
-+/*
-+ * This is the vendor id on the HX4700, anyway
-+ */
-+#define ACX_VENDOR_ID 0x8400104c
-+
-+typedef enum {
-+	ACX_SOFT_RESET = 0,
-+
-+	ACX_SLV_REG_ADDR,
-+	ACX_SLV_REG_DATA,
-+	ACX_SLV_REG_ADATA,
-+
-+	ACX_SLV_MEM_CP,
-+	ACX_SLV_MEM_ADDR,
-+	ACX_SLV_MEM_DATA,
-+	ACX_SLV_MEM_CTL,
-+} acxreg_t;
-+
-+/***********************************************************************
-+*/
-+static void acxmem_i_tx_timeout(struct net_device *ndev);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id);
-+#else
-+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+#endif
-+static void acxmem_i_set_multicast_list(struct net_device *ndev);
-+
-+static int acxmem_e_open(struct net_device *ndev);
-+static int acxmem_e_close(struct net_device *ndev);
-+static void acxmem_s_up(struct net_device *ndev);
-+static void acxmem_s_down(struct net_device *ndev);
-+
-+static void dump_acxmem (acx_device_t *adev, u32 start, int length);
-+static int acxmem_complete_hw_reset (acx_device_t *adev);
-+static void acxmem_s_delete_dma_regions(acx_device_t *adev);
-+
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxmem_e_suspend( struct net_device *ndev, pm_message_t state);
-+#else
-+acxmem_e_suspend( struct net_device *ndev, u32 state);
-+#endif
-+static void
-+fw_resumer(struct work_struct *notused);
-+//fw_resumer( void *data );
-+
-+static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
-+{
-+  struct net_device *ndev = ptr;
-+  acx_device_t *adev = ndev2adev(ndev);
-+
-+  /*
-+   * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes.
-+   */
-+
-+  if (NETDEV_CHANGEADDR == event) {
-+    /*
-+     * the upper layers put the new MAC address in ndev->dev_addr; we just copy
-+     * it over and update the ACX with it.
-+     */
-+    MAC_COPY(adev->dev_addr, adev->ndev->dev_addr);
-+    adev->set_mask |= GETSET_STATION_ID;
-+    acx_s_update_card_settings (adev);
-+  }
-+
-+  return 0;
-+}
-+
-+static struct notifier_block acx_netdev_notifier = {
-+        .notifier_call = acx_netdev_event,
-+};
-+
-+/***********************************************************************
-+** Register access
-+*/
-+
-+/* Pick one */
-+/* #define INLINE_IO static */
-+#define INLINE_IO static inline
-+
-+INLINE_IO u32
-+read_id_register (acx_device_t *adev)
-+{
-+  writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]);
-+  return readl (&adev->iobase[ACX_SLV_REG_DATA]);
-+}
-+
-+INLINE_IO u32
-+read_reg32(acx_device_t *adev, unsigned int offset)
-+{
-+        u32 val;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	  return readl(((u8*)adev->iobase) + addr);
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	val = readl( &adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return val;
-+}
-+
-+INLINE_IO u16
-+read_reg16(acx_device_t *adev, unsigned int offset)
-+{
-+	u16 lo;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    return readw(((u8 *) adev->iobase) + addr);
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return lo;
-+}
-+
-+INLINE_IO u8
-+read_reg8(acx_device_t *adev, unsigned int offset)
-+{
-+	u8 lo;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20)
-+	    return readb(((u8 *)adev->iobase) + addr);
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return (u8)lo;
-+}
-+
-+INLINE_IO void
-+write_reg32(acx_device_t *adev, unsigned int offset, u32 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writel(val, ((u8*)adev->iobase) + addr);
-+	    return;
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writel( val, &adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+INLINE_IO void
-+write_reg16(acx_device_t *adev, unsigned int offset, u16 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writew(val, ((u8 *)adev->iobase) + addr);
-+	    return;
-+	}
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+INLINE_IO void
-+write_reg8(acx_device_t *adev, unsigned int offset, u8 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writeb(val, ((u8 *) adev->iobase) + addr);
-+	    return;
-+	}
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+/* Handle PCI posting properly:
-+ * Make sure that writes reach the adapter in case they require to be executed
-+ * *before* the next write, by reading a random (and safely accessible) register.
-+ * This call has to be made if there is no read following (which would flush the data
-+ * to the adapter), yet the written data has to reach the adapter immediately. */
-+INLINE_IO void
-+write_flush(acx_device_t *adev)
-+{
-+	/* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */
-+	/* faster version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should also be safe): */
-+	(void) readl(adev->iobase);
-+}
-+
-+INLINE_IO void
-+set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) {
-+  u32 tmp;
-+
-+  tmp = read_reg32 (adev, offset);
-+  tmp = tmp | bits;
-+  write_reg32 (adev, offset, tmp);
-+  write_flush (adev);
-+}
-+
-+INLINE_IO void
-+clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) {
-+  u32 tmp;
-+
-+  tmp = read_reg32 (adev, offset);
-+  tmp = tmp & ~bits;
-+  write_reg32 (adev, offset, tmp);
-+  write_flush (adev);
-+}
-+
-+/*
-+ * Copy from PXA memory to the ACX memory.  This assumes both the PXA and ACX
-+ * addresses are 32 bit aligned.  Count is in bytes.
-+ */
-+INLINE_IO void
-+write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val)
-+{
-+  write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address);
-+  udelay (10);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val);
-+}
-+
-+INLINE_IO u32
-+read_slavemem32 (acx_device_t *adev, u32 slave_address)
-+{
-+  u32 val;
-+
-+  write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address);
-+  udelay (10);
-+  val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+
-+  return val;
-+}
-+
-+INLINE_IO void
-+write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val)
-+{
-+  u32 data;
-+  u32 base;
-+  int offset;
-+
-+  /*
-+   * Get the word containing the target address and the byte offset in that word.
-+   */
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+  data &= ~(0xff << offset);
-+  data |= val << offset;
-+  write_slavemem32 (adev, base, data);
-+}
-+
-+INLINE_IO u8
-+read_slavemem8 (acx_device_t *adev, u32 slave_address)
-+{
-+  u8 val;
-+  u32 base;
-+  u32 data;
-+  int offset;
-+
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+ 
-+  val = (data >> offset) & 0xff;
-+
-+  return val;
-+}
-+
-+/*
-+ * doesn't split across word boundaries
-+ */
-+INLINE_IO void
-+write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val)
-+{
-+  u32 data;
-+  u32 base;
-+  int offset;
-+
-+  /*
-+   * Get the word containing the target address and the byte offset in that word.
-+   */
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+  data &= ~(0xffff << offset);
-+  data |= val << offset;
-+  write_slavemem32 (adev, base, data);
-+}
-+
-+/*
-+ * doesn't split across word boundaries
-+ */
-+INLINE_IO u16
-+read_slavemem16 (acx_device_t *adev, u32 slave_address)
-+{
-+  u16 val;
-+  u32 base;
-+  u32 data;
-+  int offset;
-+
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+ 
-+  val = (data >> offset) & 0xffff;
-+
-+  return val;
-+}
-+
-+/*
-+ * Copy from slave memory
-+ *
-+ * TODO - rewrite using address autoincrement, handle partial words
-+ */
-+void
-+copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) {
-+  u32 tmp = 0;
-+  u8 *ptmp = (u8 *) &tmp;
-+
-+  /*
-+   * Right now I'm making the assumption that the destination is aligned, but
-+   * I'd better check.
-+   */
-+  if ((u32) destination & 3) {
-+    printk ("acx copy_from_slavemem: warning!  destination not word-aligned!\n");
-+  }
-+
-+  while (count >= 4) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source);
-+    udelay (10);
-+    *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    count -= 4;
-+    source += 4;
-+    destination += 4;
-+  }
-+
-+  /*
-+   * If the word reads above didn't satisfy the count, read one more word
-+   * and transfer a byte at a time until the request is satisfied.
-+   */
-+  if (count) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source);
-+    udelay (10);
-+    tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    while (count--) {
-+      *destination++ = *ptmp++;
-+    }
-+  }
-+}
-+
-+/*
-+ * Copy to slave memory
-+ *
-+ * TODO - rewrite using autoincrement, handle partial words
-+ */
-+void
-+copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count)
-+{
-+  u32 tmp = 0;
-+  u8* ptmp = (u8 *) &tmp;
-+  static u8 src[512];	/* make static to avoid huge stack objects */
-+
-+  /*
-+   * For now, make sure the source is word-aligned by copying it to a word-aligned
-+   * buffer.  Someday rewrite to avoid the extra copy.
-+   */
-+  if (count > sizeof (src)) {
-+    printk ("acx copy_to_slavemem: Warning! buffer overflow!\n");
-+    count = sizeof (src);
-+  }
-+  memcpy (src, source, count);
-+  source = src;
-+
-+  while (count >= 4) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source));
-+    count -= 4;
-+    source += 4;
-+    destination += 4;
-+  }
-+
-+  /*
-+   * If there are leftovers read the next word from the acx and merge in
-+   * what they want to write.
-+   */
-+  if (count) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    while (count--) {
-+      *ptmp++ = *source++;
-+    }
-+    /*
-+     * reset address in case we're currently in auto-increment mode
-+     */
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp);
-+    udelay (10);
-+  }
-+  
-+}
-+
-+/*
-+ * Block copy to slave buffers using memory block chain mode.  Copies to the ACX
-+ * transmit buffer structure with minimal intervention on our part.
-+ * Interrupts should be disabled when calling this.
-+ */
-+void
-+chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count)
-+{
-+  u32 val;
-+  u32 *data = (u32 *) source;
-+  static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS];
-+
-+  /*
-+   * Warn if the pointers don't look right.  Destination must fit in [23:5] with
-+   * zero elsewhere and source should be 32 bit aligned.
-+   * This should never happen since we're in control of both, but I want to know about
-+   * it if it does.
-+   */
-+  if ((destination & 0x00ffffe0) != destination) {
-+    printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination);
-+  }
-+  if (count > sizeof aligned_source) {
-+      printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" );
-+      count = sizeof aligned_source;
-+  }
-+  if ((u32) source & 3) {
-+    memcpy (aligned_source, source, count);
-+    data = (u32 *) aligned_source;
-+  }
-+
-+  /*
-+   * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment
-+   * SLV_MEM_CTL[5:2] = offset to data portion = 1 word
-+   */
-+  val = 2 << 16 | 1 << 2;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CTL]);
-+
-+  /*
-+   * SLV_MEM_CP[23:5] = start of 1st block
-+   * SLV_MEM_CP[3:2] = offset to memblkptr = 0
-+   */
-+  val = destination & 0x00ffffe0;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CP]);
-+
-+  /*
-+   * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5]
-+   */
-+  val = (destination & 0x00ffffe0) + (1<<2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]);
-+
-+  /*
-+   * Write the data to the slave data register, rounding up to the end
-+   * of the word containing the last byte (hence the > 0)
-+   */
-+  while (count > 0) {
-+    writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]);
-+    count -= 4;
-+  }
-+}
-+
-+
-+/*
-+ * Block copy from slave buffers using memory block chain mode.  Copies from the ACX
-+ * receive buffer structures with minimal intervention on our part.
-+ * Interrupts should be disabled when calling this.
-+ */
-+void
-+chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count)
-+{
-+  u32 val;
-+  u32 *data = (u32 *) destination;
-+  static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS];
-+  int saved_count = count;
-+
-+  /*
-+   * Warn if the pointers don't look right.  Destination must fit in [23:5] with
-+   * zero elsewhere and source should be 32 bit aligned.
-+   * Turns out the network stack sends unaligned things, so fix them before
-+   * copying to the ACX.
-+   */
-+  if ((source & 0x00ffffe0) != source) {
-+    printk ("acx chaincopy: source block 0x%04x not aligned!\n", source);
-+    dump_acxmem (adev, 0, 0x10000);
-+  }
-+  if ((u32) destination & 3) {
-+    //printk ("acx chaincopy: data destination not word aligned!\n");
-+    data = (u32 *) aligned_destination;
-+    if (count > sizeof aligned_destination) {
-+	printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" );
-+	count = sizeof aligned_destination;
-+    }
-+  }
-+
-+  /*
-+   * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment
-+   * SLV_MEM_CTL[5:2] = offset to data portion = 1 word
-+   */
-+  val = (2 << 16) | (1 << 2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CTL]);
-+
-+  /*
-+   * SLV_MEM_CP[23:5] = start of 1st block
-+   * SLV_MEM_CP[3:2] = offset to memblkptr = 0
-+   */
-+  val = source & 0x00ffffe0;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CP]);
-+
-+  /*
-+   * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5]
-+   */
-+  val = (source & 0x00ffffe0) + (1<<2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]);
-+
-+  /*
-+   * Read the data from the slave data register, rounding up to the end
-+   * of the word containing the last byte (hence the > 0)
-+   */
-+  while (count > 0) {
-+    *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]);
-+    count -= 4;
-+  }
-+
-+  /*
-+   * If the destination wasn't aligned, we would have saved it in
-+   * the aligned buffer, so copy it where it should go.
-+   */
-+  if ((u32) destination & 3) {
-+    memcpy (destination, aligned_destination, saved_count);
-+  }
-+}
-+
-+char
-+printable (char c) 
-+{
-+  return ((c >= 20) && (c < 127)) ? c : '.';
-+}
-+
-+#if DUMP_MEM_DEFINED > 0
-+static void
-+dump_acxmem (acx_device_t *adev, u32 start, int length)
-+{
-+  int i;
-+  u8 buf[16];
-+
-+  while (length > 0) {
-+    printk ("%04x ", start);
-+    copy_from_slavemem (adev, buf, start, 16);
-+    for (i = 0; (i < 16) && (i < length); i++) {
-+      printk ("%02x ", buf[i]);
-+    }
-+    for (i = 0; (i < 16) && (i < length); i++) {
-+      printk ("%c", printable (buf[i]));
-+    }
-+    printk ("\n");
-+    start += 16;
-+    length -= 16;
-+  }
-+}
-+#endif
-+
-+static void
-+enable_acx_irq(acx_device_t *adev);
-+static void
-+disable_acx_irq(acx_device_t *adev);
-+
-+/*
-+ * Return an acx pointer to the next transmit data block.
-+ */
-+u32
-+allocate_acx_txbuf_space (acx_device_t *adev, int count) {
-+  u32 block, next, last_block;
-+  int blocks_needed;
-+  unsigned long flags;
-+
-+  spin_lock_irqsave(&adev->txbuf_lock, flags);
-+  /*
-+   * Take 4 off the memory block size to account for the reserved word at the start of
-+   * the block.
-+   */
-+  blocks_needed = count / (adev->memblocksize - 4);
-+  if (count % (adev->memblocksize - 4))
-+    blocks_needed++;
-+
-+  if (blocks_needed <= adev->acx_txbuf_blocks_free) {
-+    /*
-+     * Take blocks at the head of the free list.
-+     */
-+    last_block = block = adev->acx_txbuf_free;
-+
-+    /*
-+     * Follow block pointers through the requested number of blocks both to
-+     * find the new head of the free list and to set the flags for the blocks
-+     * appropriately.
-+     */
-+    while (blocks_needed--) {
-+      /*
-+       * Keep track of the last block of the allocation
-+       */
-+      last_block = adev->acx_txbuf_free;
-+
-+      /*
-+       * Make sure the end control flag is not set.
-+       */
-+      next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff;
-+      write_slavemem32 (adev, adev->acx_txbuf_free, next);
-+
-+      /*
-+       * Update the new head of the free list
-+       */
-+      adev->acx_txbuf_free = next << 5;
-+      adev->acx_txbuf_blocks_free--;
-+
-+    }
-+
-+    /*
-+     * Flag the last block both by clearing out the next pointer
-+     * and marking the control field.
-+     */
-+    write_slavemem32 (adev, last_block, 0x02000000);
-+
-+    /*
-+     * If we're out of buffers make sure the free list pointer is NULL
-+     */
-+    if (!adev->acx_txbuf_blocks_free) {
-+      adev->acx_txbuf_free = 0;
-+    }
-+  }
-+  else {
-+    block = 0;
-+  }
-+  spin_unlock_irqrestore (&adev->txbuf_lock, flags);
-+  return block;
-+}
-+
-+/*
-+ * Return buffer space back to the pool by following the next pointers until we find
-+ * the block marked as the end.  Point the last block to the head of the free list,
-+ * then update the head of the free list to point to the newly freed memory.
-+ * This routine gets called in interrupt context, so it shouldn't block to protect
-+ * the integrity of the linked list.  The ISR already holds the lock.
-+ */
-+void
-+reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) {
-+  u32 cur, last, next;
-+  unsigned long flags;
-+
-+  spin_lock_irqsave (&adev->txbuf_lock, flags);
-+  if ((blockptr >= adev->acx_txbuf_start) &&
-+      (blockptr <= adev->acx_txbuf_start +
-+       (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) {
-+    cur = blockptr;
-+    do {
-+      last = cur;
-+      next = read_slavemem32 (adev, cur);
-+      
-+      /*
-+       * Advance to the next block in this allocation
-+       */
-+      cur = (next & 0x7ffff) << 5;
-+      
-+      /*
-+       * This block now counts as free.
-+       */
-+      adev->acx_txbuf_blocks_free++;
-+    } while (!(next & 0x02000000));
-+    
-+    /*
-+     * last now points to the last block of that allocation.  Update the pointer
-+     * in that block to point to the free list and reset the free list to the
-+     * first block of the free call.  If there were no free blocks, make sure
-+     * the new end of the list marks itself as truly the end.
-+     */
-+    if (adev->acx_txbuf_free) {
-+      write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5);
-+    }
-+    else {
-+      write_slavemem32 (adev, last, 0x02000000);
-+    }
-+    adev->acx_txbuf_free = blockptr;
-+  } 
-+  spin_unlock_irqrestore(&adev->txbuf_lock, flags);
-+}
-+
-+/*
-+ * Initialize the pieces managing the transmit buffer pool on the ACX.  The transmit
-+ * buffer is a circular queue with one 32 bit word reserved at the beginning of each
-+ * block.  The upper 13 bits are a control field, of which only 0x02000000 has any
-+ * meaning.  The lower 19 bits are the address of the next block divided by 32.
-+ */
-+void
-+init_acx_txbuf (acx_device_t *adev) {
-+  
-+  /*
-+   * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us.
-+   * All we need to do is reset the rest of the bookeeping.
-+   */
-+  
-+  adev->acx_txbuf_free = adev->acx_txbuf_start;
-+  adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks;
-+  
-+  /*
-+   * Initialization leaves the last transmit pool block without a pointer back to
-+   * the head of the list, but marked as the end of the list.  That's how we want
-+   * to see it, too, so leave it alone.  This is only ever called after a firmware
-+   * reset, so the ACX memory is in the state we want.
-+   */
-+	
-+}
-+
-+INLINE_IO int
-+adev_present(acx_device_t *adev)
-+{
-+	/* fast version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should be safe): */
-+	return readl(adev->iobase) != 0xffffffff;
-+}
-+
-+/***********************************************************************
-+*/
-+static inline txdesc_t*
-+get_txdesc(acx_device_t *adev, int index)
-+{
-+	return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size);
-+}
-+
-+static inline txdesc_t*
-+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc)
-+{
-+	return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size);
-+}
-+
-+static txhostdesc_t*
-+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return &adev->txhostdesc_start[index*2];
-+}
-+
-+static inline client_t*
-+get_txc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return adev->txc[index];
-+}
-+
-+static inline u16
-+get_txr(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	index /= adev->txdesc_size;
-+	return adev->txr[index];
-+}
-+
-+static inline void
-+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	adev->txc[index] = c;
-+	adev->txr[index] = r111;
-+}
-+
-+
-+/***********************************************************************
-+** EEPROM and PHY read/write helpers
-+*/
-+/***********************************************************************
-+** acxmem_read_eeprom_byte
-+**
-+** Function called to read an octet in the EEPROM.
-+**
-+** This function is used by acxmem_e_probe to check if the
-+** connected card is a legal one or not.
-+**
-+** Arguments:
-+**	adev		ptr to acx_device structure
-+**	addr		address to read in the EEPROM
-+**	charbuf		ptr to a char. This is where the read octet
-+**			will be stored
-+*/
-+int
-+acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf)
-+{
-+	int result;
-+	int count;
-+
-+	write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+	write_reg32(adev, IO_ACX_EEPROM_ADDR, addr);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for EEPROM read\n",
-+							adev->ndev->name);
-+			result = NOT_OK;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	*charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA);
-+	log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf);
-+	result = OK;
-+
-+fail:
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** We don't lock hw accesses here since we never r/w eeprom in IRQ
-+** Note: this function sleeps only because of GFP_KERNEL alloc
-+*/
-+#ifdef UNUSED
-+int
-+acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf)
-+{
-+	u8 *data_verify = NULL;
-+	unsigned long flags;
-+	int count, i;
-+	int result = NOT_OK;
-+	u16 gpio_orig;
-+
-+	printk("acx: WARNING! I would write to EEPROM now. "
-+		"Since I really DON'T want to unless you know "
-+		"what you're doing (THIS CODE WILL PROBABLY "
-+		"NOT WORK YET!), I will abort that now. And "
-+		"definitely make sure to make a "
-+		"/proc/driver/acx_wlan0_eeprom backup copy first!!! "
-+		"(the EEPROM content includes the PCI config header!! "
-+		"If you kill important stuff, then you WILL "
-+		"get in trouble and people DID get in trouble already)\n");
-+	return OK;
-+
-+	FN_ENTER;
-+
-+	data_verify = kmalloc(len, GFP_KERNEL);
-+	if (!data_verify) {
-+		goto end;
-+	}
-+
-+	/* first we need to enable the OE (EEPROM Output Enable) GPIO line
-+	 * to be able to write to the EEPROM.
-+	 * NOTE: an EEPROM writing success has been reported,
-+	 * but you probably have to modify GPIO_OUT, too,
-+	 * and you probably need to activate a different GPIO
-+	 * line instead! */
-+	gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE);
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1);
-+	write_flush(adev);
-+
-+	/* ok, now start writing the data out */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i));
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 1);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("WARNING, DANGER!!! "
-+					"Timeout waiting for EEPROM write\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+	}
-+
-+	/* disable EEPROM writing */
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig);
-+	write_flush(adev);
-+
-+	/* now start a verification run */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("timeout waiting for EEPROM read\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+
-+		data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA);
-+	}
-+
-+	if (0 == memcmp(charbuf, data_verify, len))
-+		result = OK; /* read data matches, success */
-+
-+end:
-+	kfree(data_verify);
-+	FN_EXIT1(result);
-+	return result;
-+}
-+#endif /* UNUSED */
-+
-+
-+/***********************************************************************
-+** acxmem_s_read_phy_reg
-+**
-+** Messing with rx/tx disabling and enabling here
-+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic
-+*/
-+int
-+acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	int result = NOT_OK;
-+	int count;
-+
-+	FN_ENTER;
-+
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			*charbuf = 0;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "count was %u\n", count);
-+	*charbuf = read_reg8(adev, IO_ACX_PHY_DATA);
-+
-+	log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg);
-+	result = OK;
-+	goto fail; /* silence compiler warning */
-+fail:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+        int count;
-+	FN_ENTER;
-+
-+	/* mprusko said that 32bit accesses result in distorted sensitivity
-+	 * on his card. Unconfirmed, looks like it's not true (most likely since we
-+	 * now properly flush writes). */
-+	write_reg32(adev, IO_ACX_PHY_DATA, value);
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 1);
-+	write_flush(adev);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg);
-+ fail:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+#define NO_AUTO_INCREMENT	1
-+
-+/***********************************************************************
-+** acxmem_s_write_fw
-+**
-+** Write the firmware image into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	1	firmware image corrupted
-+**	0	success
-+*/
-+static int
-+acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset)
-+{
-+	int len, size, checkMismatch = -1;
-+	u32 sum, v32, tmp, id;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+	write_flush(adev);
-+#endif
-+#endif
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		sum += p[0]+p[1]+p[2]+p[3];
-+		p += 4;
-+		len += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT 
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+		write_flush(adev);
-+#endif
-+		write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32);
-+		write_flush(adev);
-+#endif
-+		write_slavemem32 (adev, offset + len - 4, v32);
-+
-+		id = read_id_register (adev);
-+		
-+		/*
-+		 * check the data written
-+		 */
-+		tmp = read_slavemem32 (adev, offset + len - 4);
-+		if (checkMismatch && (tmp != v32)) {
-+		  printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n",
-+			  offset + len - 4, v32, tmp, id);
-+		  checkMismatch = 0;
-+		}
-+	}
-+	log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n",
-+			size, sum, le32_to_cpu(fw_image->chksum));
-+
-+	/* compare our checksum with the stored image checksum */
-+	return (sum != le32_to_cpu(fw_image->chksum));
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_validate_fw
-+**
-+** Compare the firmware image given with
-+** the firmware image written into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	NOT_OK	firmware image corrupted or not correctly written
-+**	OK	success
-+*/
-+static int
-+acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image,
-+				u32 offset)
-+{
-+	u32 sum, v32, w32;
-+	int len, size;
-+	int result = OK;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+	write_reg32(adev, IO_ACX_SLV_END_CTL, 0);
-+
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+#endif
-+
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		p += 4;
-+		len += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+#endif
-+		udelay(10);
-+		w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA);
-+#endif
-+		w32 = read_slavemem32 (adev, offset + len - 4);
-+
-+		if (unlikely(w32 != v32)) {
-+			printk("acx: FATAL: firmware upload: "
-+			"data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n"
-+			"I/O timing issues or defective memory, with DWL-xx0+? "
-+			"ACX_IO_WIDTH=16 may help. Please report\n",
-+				len, v32, w32);
-+			result = NOT_OK;
-+			break;
-+		}
-+
-+		sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24);
-+	}
-+
-+	/* sum control verification */
-+	if (result != NOT_OK) {
-+		if (sum != le32_to_cpu(fw_image->chksum)) {
-+			printk("acx: FATAL: firmware upload: "
-+				"checksums don't match!\n");
-+			result = NOT_OK;
-+		}
-+	}
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_upload_fw
-+**
-+** Called from acx_reset_dev
-+*/
-+static int
-+acxmem_s_upload_fw(acx_device_t *adev)
-+{
-+	firmware_image_t *fw_image = NULL;
-+	int res = NOT_OK;
-+	int try;
-+	u32 file_size;
-+	char *filename = "WLANGEN.BIN";
-+#ifdef PATCH_AROUND_BAD_SPOTS
-+	u32 offset;
-+	int i;
-+        /*
-+         * arm-linux-objdump -d patch.bin, or
-+         * od -Ax -t x4 patch.bin after finding the bounds
-+         * of the .text section with arm-linux-objdump -s patch.bin
-+         */
-+        u32 patch[] = {
-+	  0xe584c030, 0xe59fc008,
-+	  0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c,
-+	  0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a,
-+	  0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24,
-+	  0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db,
-+	  0x60ca6003, 0xbdf0750a, 0xffff0808
-+	};
-+#endif
-+
-+	FN_ENTER;
-+	/* No combined image; tell common we need the radio firmware, too */
-+	adev->need_radio_fw = 1;
-+
-+	fw_image = acx_s_read_fw(adev->dev, filename, &file_size);
-+	if (!fw_image) {
-+	  FN_EXIT1(NOT_OK);
-+	  return NOT_OK;
-+	}
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxmem_s_write_fw(adev, fw_image, 0);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res);
-+		if (OK == res) {
-+			res = acxmem_s_validate_fw(adev, fw_image, 0);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw "
-+					"(main): %d\n", res);
-+		}
-+
-+		if (OK == res) {
-+			SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED);
-+			break;
-+		}
-+		printk("acx: firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+#ifdef PATCH_AROUND_BAD_SPOTS
-+	/*
-+	 * Only want to do this if the firmware is exactly what we expect for an
-+	 * iPaq 4700; otherwise, bad things would ensue.
-+	 */
-+	if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) ||
-+	    (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) {
-+	  /*
-+	   * Put the patch after the main firmware image.  0x950c contains
-+	   * the ACX's idea of the end of the firmware.  Use that location to
-+	   * load ours (which depends on that location being 0xab58) then
-+	   * update that location to point to after ours.
-+	   */
-+
-+	  offset = read_slavemem32 (adev, 0x950c);
-+	  
-+	  log (L_DEBUG, "acx: patching in at 0x%04x\n", offset);
-+
-+	  for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) {
-+	    write_slavemem32 (adev, offset, patch[i]);
-+	    offset += sizeof(u32);
-+	  }
-+
-+	  /*
-+	   * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58
-+	   */
-+	  write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4);
-+
-+	  /*
-+	   * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74
-+	   *
-+	   * 4a00 ldr r2, [pc, #0]
-+	   * 4710 bx  r2
-+	   * .data 0xab74+1
-+	   */
-+	  write_slavemem32 (adev, 0x1f40, 0x47104a00);
-+	  write_slavemem32 (adev, 0x1f44, 0x0000ab74+1);
-+
-+	  /*
-+	   * Bump the end of the firmware up to beyond our patch.
-+	   */
-+	  write_slavemem32 (adev, 0x950c, offset);
-+	
-+	}
-+#endif
-+
-+	vfree(fw_image);
-+
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_upload_radio
-+**
-+** Uploads the appropriate radio module firmware into the card.
-+*/
-+int
-+acxmem_s_upload_radio(acx_device_t *adev)
-+{
-+	acx_ie_memmap_t mm;
-+	firmware_image_t *radio_image;
-+	acx_cmd_radioinit_t radioinit;
-+	int res = NOT_OK;
-+	int try;
-+	u32 offset;
-+	u32 size;
-+	char filename[sizeof("RADIONN.BIN")];
-+
-+	if (!adev->need_radio_fw) return OK;
-+
-+	FN_ENTER;
-+
-+	acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+	offset = le32_to_cpu(mm.CodeEnd);
-+
-+	snprintf(filename, sizeof(filename), "RADIO%02x.BIN",
-+		adev->radio_type);
-+	radio_image = acx_s_read_fw(adev->dev, filename, &size);
-+	if (!radio_image) {
-+		printk("acx: can't load radio module '%s'\n", filename);
-+		goto fail;
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0);
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxmem_s_write_fw(adev, radio_image, offset);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res);
-+		if (OK == res) {
-+			res = acxmem_s_validate_fw(adev, radio_image, offset);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res);
-+		}
-+
-+		if (OK == res)
-+			break;
-+		printk("acx: radio firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+	radioinit.offset = cpu_to_le32(offset);
-+
-+	/* no endian conversion needed, remains in card CPU area: */
-+	radioinit.len = radio_image->size;
-+
-+	vfree(radio_image);
-+
-+	if (OK != res)
-+		goto fail;
-+
-+	/* will take a moment so let's have a big timeout */
-+	acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT,
-+		&radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000));
-+
-+	res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+
-+fail:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+/***********************************************************************
-+** acxmem_l_reset_mac
-+**
-+** MAC will be reset
-+** Call context: reset_dev
-+*/
-+static void
-+acxmem_l_reset_mac(acx_device_t *adev)
-+{
-+  int count;
-+	FN_ENTER;
-+
-+	/* halt eCPU */
-+	set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1);
-+
-+	/* now do soft reset of eCPU, set bit */
-+	set_regbits (adev, IO_ACX_SOFT_RESET, 0x1);
-+	log(L_DEBUG, "%s: enable soft reset...\n", __func__);
-+
-+	/* Windows driver sleeps here for a while with this sequence */
-+	for (count = 0; count < 200; count++) {
-+	  udelay (50);
-+	}
-+
-+	/* now clear bit again: deassert eCPU reset */
-+	log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__);
-+	clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1);
-+
-+	/* now start a burst read from initial EEPROM */
-+	set_regbits (adev, IO_ACX_EE_START, 0x1);
-+
-+	/*
-+	 * Windows driver sleeps here for a while with this sequence
-+	 */
-+	for (count = 0; count < 200; count++) {
-+	  udelay (50);
-+	}
-+
-+	/* Windows driver writes 0x10000 to register 0x808 here */
-+	
-+	write_reg32 (adev, 0x808, 0x10000);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_verify_init
-+*/
-+static int
-+acxmem_s_verify_init(acx_device_t *adev)
-+{
-+	int result = NOT_OK;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	timeout = jiffies + 2*HZ;
-+	for (;;) {
-+		u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+		if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) {
-+			result = OK;
-+			write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD);
-+			break;
-+		}
-+		if (time_after(jiffies, timeout))
-+			break;
-+		/* Init may take up to ~0.5 sec total */
-+		acx_s_msleep(50);
-+	}
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** A few low-level helpers
-+**
-+** Note: these functions are not protected by lock
-+** and thus are never allowed to be called from IRQ.
-+** Also they must not race with fw upload which uses same hw regs
-+*/
-+
-+/***********************************************************************
-+** acxmem_write_cmd_type_status
-+*/
-+
-+static inline void
-+acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status)
-+{
-+  write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16));
-+  write_flush(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_read_cmd_type_status
-+*/
-+static u32
-+acxmem_read_cmd_type_status(acx_device_t *adev)
-+{
-+	u32 cmd_type, cmd_status;
-+
-+	cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area);
-+
-+	cmd_status = (cmd_type >> 16);
-+	cmd_type = (u16)cmd_type;
-+
-+	log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n",
-+		cmd_type, cmd_status,
-+		acx_cmd_status_str(cmd_status));
-+
-+	return cmd_status;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_reset_dev
-+**
-+** Arguments:
-+**	netdevice that contains the adev variable
-+** Returns:
-+**	NOT_OK on fail
-+**	OK on success
-+** Side effects:
-+**	device is hard reset
-+** Call context:
-+**	acxmem_e_probe
-+** Comment:
-+**	This resets the device using low level hardware calls
-+**	as well as uploads and verifies the firmware to the card
-+*/
-+
-+static inline void
-+init_mboxes(acx_device_t *adev)
-+{
-+	u32 cmd_offs, info_offs;
-+
-+	cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS);
-+	info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS);
-+	adev->cmd_area = (u8*) cmd_offs;
-+	adev->info_area = (u8*) info_offs;
-+	/*
-+	log(L_DEBUG, "iobase2=%p\n"
-+	*/
-+	log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n"
-+		"info_mbox_offset=%X info_area=%p\n",
-+		cmd_offs, adev->cmd_area,
-+		info_offs, adev->info_area);
-+}
-+
-+
-+static inline void
-+read_eeprom_area(acx_device_t *adev)
-+{
-+#if ACX_DEBUG > 1
-+	int offs;
-+	u8 tmp;
-+
-+	for (offs = 0x8c; offs < 0xb9; offs++)
-+		acxmem_read_eeprom_byte(adev, offs, &tmp);
-+#endif
-+}
-+
-+static int
-+acxmem_s_reset_dev(acx_device_t *adev)
-+{
-+	const char* msg = "";
-+	unsigned long flags;
-+	int result = NOT_OK;
-+	u16 hardware_info;
-+	u16 ecpu_ctrl;
-+	int count;
-+	u32 tmp;
-+
-+	FN_ENTER;
-+	/*
-+	write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0);
-+	*/
-+	/* reset the device to make sure the eCPU is stopped
-+	 * to upload the firmware correctly */
-+
-+	acx_lock(adev, flags);
-+
-+	/* Windows driver does some funny things here */
-+	/*
-+	 * clear bit 0x200 in register 0x2A0
-+	 */
-+	clear_regbits (adev, 0x2A0, 0x200);
-+
-+	/*
-+	 * Set bit 0x200 in ACX_GPIO_OUT
-+	 */
-+	set_regbits (adev, IO_ACX_GPIO_OUT, 0x200);
-+
-+	/*
-+	 * read register 0x900 until its value is 0x8400104C, sleeping
-+	 * in between reads if it's not immediate
-+	 */
-+	tmp = read_reg32 (adev, REG_ACX_VENDOR_ID);
-+	count = 500;
-+	while (count-- && (tmp != ACX_VENDOR_ID)) {
-+	  mdelay (10);
-+	  tmp = read_reg32 (adev, REG_ACX_VENDOR_ID);
-+	}
-+
-+	/* end what Windows driver does */
-+
-+	acxmem_l_reset_mac(adev);
-+
-+	ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1;
-+	if (!ecpu_ctrl) {
-+		msg = "eCPU is already running. ";
-+		goto end_unlock;
-+	}
-+
-+#ifdef WE_DONT_NEED_THAT_DO_WE
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) {
-+		/* eCPU most likely means "embedded CPU" */
-+		msg = "eCPU did not start after boot from flash. ";
-+		goto end_unlock;
-+	}
-+
-+	/* check sense on reset flags */
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) {
-+		printk("%s: eCPU did not start after boot (SOR), "
-+			"is this fatal?\n", adev->ndev->name);
-+	}
-+#endif
-+	/* scan, if any, is stopped now, setting corresponding IRQ bit */
-+	adev->irq_status |= HOST_INT_SCAN_COMPLETE;
-+
-+	acx_unlock(adev, flags);
-+	
-+	/* need to know radio type before fw load */
-+	/* Need to wait for arrival of this information in a loop,
-+	 * most probably since eCPU runs some init code from EEPROM
-+	 * (started burst read in reset_mac()) which also
-+	 * sets the radio type ID */
-+
-+	count = 0xffff;
-+	do {
-+		hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION);
-+		if (!--count) {
-+			msg = "eCPU didn't indicate radio type";
-+			goto end_fail;
-+		}
-+		cpu_relax();
-+	} while (!(hardware_info & 0xff00)); /* radio type still zero? */
-+	printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff);
-+	/* printk("DEBUG: count %d\n", count); */
-+	adev->form_factor = hardware_info & 0xff;
-+	adev->radio_type = hardware_info >> 8;
-+
-+	/* load the firmware */
-+	if (OK != acxmem_s_upload_fw(adev))
-+		goto end_fail;
-+
-+	/* acx_s_msleep(10);	this one really shouldn't be required */
-+
-+	/* now start eCPU by clearing bit */
-+	clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1);
-+	log(L_DEBUG, "booted eCPU up and waiting for completion...\n");
-+
-+	/* Windows driver clears bit 0x200 in register 0x2A0 here */
-+	clear_regbits (adev, 0x2A0, 0x200);
-+
-+	/* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */
-+	set_regbits (adev, IO_ACX_GPIO_OUT, 0x200);
-+	/* wait for eCPU bootup */
-+	if (OK != acxmem_s_verify_init(adev)) {
-+		msg = "timeout waiting for eCPU. ";
-+		goto end_fail;
-+	}
-+	log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n");
-+	init_mboxes(adev);
-+	acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0);
-+
-+	/* test that EEPROM is readable */
-+	read_eeprom_area(adev);
-+
-+	result = OK;
-+	goto end;
-+
-+/* Finish error message. Indicate which function failed */
-+end_unlock:
-+	acx_unlock(adev, flags);
-+end_fail:
-+	printk("acx: %sreset_dev() FAILED\n", msg);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_issue_cmd_timeo
-+**
-+** Sends command to fw, extract result
-+**
-+** NB: we do _not_ take lock inside, so be sure to not touch anything
-+** which may interfere with IRQ handler operation
-+**
-+** TODO: busy wait is a bit silly, so:
-+** 1) stop doing many iters - go to sleep after first
-+** 2) go to waitqueue based approach: wait, not poll!
-+*/
-+#undef FUNC
-+#define FUNC "issue_cmd"
-+
-+#if !ACX_DEBUG
-+int
-+acxmem_s_issue_cmd_timeo(
-+	acx_device_t *adev,
-+	unsigned int cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout)
-+{
-+#else
-+int
-+acxmem_s_issue_cmd_timeo_debug(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout,
-+	const char* cmdstr)
-+{
-+	unsigned long start = jiffies;
-+#endif
-+	const char *devname;
-+	unsigned counter;
-+	u16 irqtype;
-+	int i, j;
-+	u8 *p;
-+	u16 cmd_status;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	devname = adev->ndev->name;
-+	if (!devname || !devname[0] || devname[4]=='%')
-+		devname = "acx";
-+
-+	log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n",
-+		cmdstr, buflen, cmd_timeout,
-+		buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1);
-+
-+	if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) {
-+		printk("%s: "FUNC"(): firmware is not loaded yet, "
-+			"cannot execute commands!\n", devname);
-+		goto bad;
-+	}
-+
-+	if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) {
-+		printk("input buffer (len=%u):\n", buflen);
-+		acx_dump_bytes(buffer, buflen);
-+	}
-+
-+	/* wait for firmware to become idle for our command submission */
-+	timeout = HZ/5;
-+	counter = (timeout * 1000 / HZ) - 1; /* in ms */
-+	timeout += jiffies;
-+	do {
-+		cmd_status = acxmem_read_cmd_type_status(adev);
-+		/* Test for IDLE state */
-+		if (!cmd_status)
-+			break;
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	if (!counter) {
-+		/* the card doesn't get idle, we're in trouble */
-+		printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n",
-+			devname, cmd_status);
-+#if DUMP_IF_SLOW > 0
-+		dump_acxmem (adev, 0, 0x10000);
-+		panic ("not idle");
-+#endif
-+		goto bad;
-+	} else if (counter < 190) { /* if waited >10ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. "
-+			"Please report\n", 199 - counter);
-+	}
-+
-+	/* now write the parameters of the command if needed */
-+	if (buffer && buflen) {
-+		/* if it's an INTERROGATE command, just pass the length
-+		 * of parameters to read, as data */
-+#if CMD_DISCOVERY
-+		if (cmd == ACX1xx_CMD_INTERROGATE)
-+			memset_io(adev->cmd_area + 4, 0xAA, buflen);
-+#endif
-+		/*
-+		 * slave memory version
-+		 */
-+		copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, 
-+			       (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen);
-+	}
-+	/* now write the actual command type */
-+	acxmem_write_cmd_type_status(adev, cmd, 0);
-+
-+	/* clear CMD_COMPLETE bit. can be set only by IRQ handler: */
-+	adev->irq_status &= ~HOST_INT_CMD_COMPLETE;
-+
-+	/* execute command */
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD);
-+	write_flush(adev);
-+
-+	/* wait for firmware to process command */
-+
-+	/* Ensure nonzero and not too large timeout.
-+	** Also converts e.g. 100->99, 200->199
-+	** which is nice but not essential */
-+	cmd_timeout = (cmd_timeout-1) | 1;
-+	if (unlikely(cmd_timeout > 1199))
-+		cmd_timeout = 1199;
-+
-+	/* we schedule away sometimes (timeout can be large) */
-+	counter = cmd_timeout;
-+	timeout = jiffies + cmd_timeout * HZ / 1000;
-+	do {
-+		if (!adev->irqs_active) { /* IRQ disabled: poll */
-+			irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+			if (irqtype & HOST_INT_CMD_COMPLETE) {
-+				write_reg16(adev, IO_ACX_IRQ_ACK,
-+						HOST_INT_CMD_COMPLETE);
-+				break;
-+			}
-+		} else { /* Wait when IRQ will set the bit */
-+			irqtype = adev->irq_status;
-+			if (irqtype & HOST_INT_CMD_COMPLETE)
-+				break;
-+		}
-+
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	/* save state for debugging */
-+	cmd_status = acxmem_read_cmd_type_status(adev);
-+
-+	/* put the card in IDLE state */
-+	acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0);
-+
-+	if (!counter) {	/* timed out! */
-+		printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. "
-+			"irq bits:0x%04X irq_status:0x%04X timeout:%dms "
-+			"cmd_status:%d (%s)\n",
-+			devname, (adev->irqs_active) ? "waiting" : "polling",
-+			irqtype, adev->irq_status, cmd_timeout,
-+			cmd_status, acx_cmd_status_str(cmd_status));
-+		printk("%s: "FUNC"(): device irq status 0x%04x\n",
-+		       devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES));
-+		printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n",
-+		       devname,
-+		       read_reg16 (adev, IO_ACX_IRQ_MASK),
-+		       read_reg16 (adev, IO_ACX_FEMR));
-+		if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) {
-+			printk ("acxmem: firmware probably hosed - reloading\n");
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+                	{
-+				pm_message_t state;
-+				/* acxmem_e_suspend (resume_pdev, state); */
-+				acxmem_e_suspend (adev->ndev , state);
-+			}
-+#else
-+			acxmem_e_suspend (adev, 0);
-+#endif
-+			{
-+				resume_ndev = adev->ndev;
-+				fw_resumer (NULL);
-+			}
-+		}
-+
-+		goto bad;
-+	} else if (cmd_timeout - counter > 30) { /* if waited >30ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. "
-+			"count:%d. Please report\n",
-+			(adev->irqs_active) ? "waited" : "polled",
-+			cmd_timeout - counter, counter);
-+	}
-+
-+	if (1 != cmd_status) { /* it is not a 'Success' */
-+		printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). "
-+			"Took %dms of %d\n",
-+			devname, cmd_status, acx_cmd_status_str(cmd_status),
-+			cmd_timeout - counter, cmd_timeout);
-+		/* zero out result buffer
-+		 * WARNING: this will trash stack in case of illegally large input
-+		 * length! */
-+		if (buflen > 388) {
-+		  /*
-+		   * 388 is maximum command length
-+		   */
-+		  printk ("invalid length 0x%08x\n", buflen);
-+		  buflen = 388;
-+		}
-+		p = (u8 *) buffer;
-+		for (i = 0; i < buflen; i+= 16) {
-+		  printk ("%04x:", i);
-+		  for (j = 0; (j < 16) && (i+j < buflen); j++) {
-+		    printk (" %02x", *p++);
-+		  }
-+		  printk ("\n");
-+		}
-+		if (buffer && buflen)
-+			memset(buffer, 0, buflen);
-+		goto bad;
-+	}
-+
-+	/* read in result parameters if needed */
-+	if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) {
-+		copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen);
-+		if (acx_debug & L_DEBUG) {
-+			printk("output buffer (len=%u): ", buflen);
-+			acx_dump_bytes(buffer, buflen);
-+		}
-+	}
-+
-+/* ok: */
-+	log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n",
-+			 cmdstr, jiffies - start);
-+	FN_EXIT1(OK);
-+	return OK;
-+
-+bad:
-+	/* Give enough info so that callers can avoid
-+	** printing their own diagnostic messages */
-+#if ACX_DEBUG
-+	printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr);
-+#else
-+	printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd);
-+#endif
-+	dump_stack();
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#if defined(NONESSENTIAL_FEATURES)
-+typedef struct device_id {
-+	unsigned char id[6];
-+	char *descr;
-+	char *type;
-+} device_id_t;
-+
-+static const device_id_t
-+device_ids[] =
-+{
-+	{
-+		{'G', 'l', 'o', 'b', 'a', 'l'},
-+		NULL,
-+		NULL,
-+	},
-+	{
-+		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
-+		"uninitialized",
-+		"SpeedStream SS1021 or Gigafast WF721-AEX"
-+	},
-+	{
-+		{0x80, 0x81, 0x82, 0x83, 0x84, 0x85},
-+		"non-standard",
-+		"DrayTek Vigor 520"
-+	},
-+	{
-+		{'?', '?', '?', '?', '?', '?'},
-+		"non-standard",
-+		"Level One WPC-0200"
-+	},
-+	{
-+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
-+		"empty",
-+		"DWL-650+ variant"
-+	}
-+};
-+
-+static void
-+acx_show_card_eeprom_id(acx_device_t *adev)
-+{
-+	unsigned char buffer[CARD_EEPROM_ID_SIZE];
-+	int i;
-+
-+	memset(&buffer, 0, CARD_EEPROM_ID_SIZE);
-+	/* use direct EEPROM access */
-+	for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) {
-+		if (OK != acxmem_read_eeprom_byte(adev,
-+					 ACX100_EEPROM_ID_OFFSET + i,
-+					 &buffer[i])) {
-+			printk("acx: reading EEPROM FAILED\n");
-+			break;
-+		}
-+	}
-+
-+	for (i = 0; i < VEC_SIZE(device_ids); i++) {
-+		if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) {
-+			if (device_ids[i].descr) {
-+				printk("acx: EEPROM card ID string check "
-+					"found %s card ID: is this %s?\n",
-+					device_ids[i].descr, device_ids[i].type);
-+			}
-+			break;
-+		}
-+	}
-+	if (i == VEC_SIZE(device_ids)) {
-+		printk("acx: EEPROM card ID string check found "
-+			"unknown card: expected 'Global', got '%.*s\'. "
-+			"Please report\n", CARD_EEPROM_ID_SIZE, buffer);
-+	}
-+}
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+/***********************************************************************
-+** acxmem_free_desc_queues
-+**
-+** Releases the queues that have been allocated, the
-+** others have been initialised to NULL so this
-+** function can be used if only part of the queues were allocated.
-+*/
-+
-+void
-+acxmem_free_desc_queues(acx_device_t *adev)
-+{
-+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \
-+        if (ptr) { \
-+                kfree(ptr); \
-+                ptr = NULL; \
-+                size = 0; \
-+        }
-+
-+	FN_ENTER;
-+
-+	ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy);
-+
-+	adev->txdesc_start = NULL;
-+
-+	ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy);
-+
-+	adev->rxdesc_start = NULL;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_delete_dma_regions
-+*/
-+static void
-+acxmem_s_delete_dma_regions(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+	/* disable radio Tx/Rx. Shouldn't we use the firmware commands
-+	 * here instead? Or are we that much down the road that it's no
-+	 * longer possible here? */
-+	/*
-+	 * slave memory interface really doesn't like this.
-+	 */
-+	/*
-+	write_reg16(adev, IO_ACX_ENABLE, 0);
-+	*/
-+
-+	acx_s_msleep(100);
-+
-+	acx_lock(adev, flags);
-+	acxmem_free_desc_queues(adev);
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_probe
-+**
-+** Probe routine called when a PCI device w/ matching ID is found.
-+** Here's the sequence:
-+**   - Allocate the PCI resources.
-+**   - Read the PCMCIA attribute memory to make sure we have a WLAN card
-+**   - Reset the MAC
-+**   - Initialize the dev and wlan data
-+**   - Initialize the MAC
-+**
-+** pdev	- ptr to pci device structure containing info about pci configuration
-+** id	- ptr to the device id entry that matched this device
-+*/
-+static const u16
-+IO_ACX100[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_END_CTL */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x007c, /* IO_ACX_INT_TRIG */
-+	0x0098, /* IO_ACX_IRQ_MASK */
-+	0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00ac, /* IO_ACX_IRQ_ACK */
-+	0x00b0, /* IO_ACX_HINT_TRIG */
-+
-+	0x0104, /* IO_ACX_ENABLE */
-+
-+	0x0250, /* IO_ACX_EEPROM_CTL */
-+	0x0254, /* IO_ACX_EEPROM_ADDR */
-+	0x0258, /* IO_ACX_EEPROM_DATA */
-+	0x025c, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0268, /* IO_ACX_PHY_ADDR */
-+	0x026c, /* IO_ACX_PHY_DATA */
-+	0x0270, /* IO_ACX_PHY_CTL */
-+
-+	0x0290, /* IO_ACX_GPIO_OE */
-+
-+	0x0298, /* IO_ACX_GPIO_OUT */
-+
-+	0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x02ac, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x02d0, /* IO_ACX_EE_START */
-+	0x02d4, /* IO_ACX_SOR_CFG */
-+	0x02d8 /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static const u16
-+IO_ACX111[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_MEM_CP */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x00b4, /* IO_ACX_INT_TRIG */
-+	0x00d4, /* IO_ACX_IRQ_MASK */
-+	/* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */
-+	0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00e8, /* IO_ACX_IRQ_ACK */
-+	0x00ec, /* IO_ACX_HINT_TRIG */
-+
-+	0x01d0, /* IO_ACX_ENABLE */
-+
-+	0x0338, /* IO_ACX_EEPROM_CTL */
-+	0x033c, /* IO_ACX_EEPROM_ADDR */
-+	0x0340, /* IO_ACX_EEPROM_DATA */
-+	0x0344, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0350, /* IO_ACX_PHY_ADDR */
-+	0x0354, /* IO_ACX_PHY_DATA */
-+	0x0358, /* IO_ACX_PHY_CTL */
-+
-+	0x0374, /* IO_ACX_GPIO_OE */
-+
-+	0x037c, /* IO_ACX_GPIO_OUT */
-+
-+	0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x0390, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x0100, /* IO_ACX_EE_START */
-+	0x0104, /* IO_ACX_SOR_CFG */
-+	0x0108, /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static void
-+dummy_netdev_init(struct net_device *ndev) {}
-+
-+/*
-+ * Most of the acx specific pieces of hardware reset.
-+ */
-+static int
-+acxmem_complete_hw_reset (acx_device_t *adev)
-+{
-+	acx111_ie_configoption_t co;
-+
-+	/* NB: read_reg() reads may return bogus data before reset_dev(),
-+	 * since the firmware which directly controls large parts of the I/O
-+	 * registers isn't initialized yet.
-+	 * acx100 seems to be more affected than acx111 */
-+	if (OK != acxmem_s_reset_dev (adev))
-+	  return -1;
-+
-+	if (IS_ACX100(adev)) {
-+		/* ACX100: configopt struct in cmd mailbox - directly after reset */
-+		copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co));
-+	}
-+
-+	if (OK != acx_s_init_mac(adev))
-+	  return -3;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111: configopt struct needs to be queried after full init */
-+		acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS);
-+	}
-+
-+	/*
-+	 * Set up transmit buffer administration
-+	 */
-+	init_acx_txbuf (adev);
-+
-+	/*
-+	 * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor
-+	 * is 3.  It also write protects the EEPROM by writing 1<<9 to GPIO_OUT
-+	 */
-+	if (adev->form_factor == 3) {
-+	  set_regbits (adev, 0x288, 0x01000000);
-+	  set_regbits (adev, 0x298, 1<<9);
-+	}
-+
-+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */
-+	if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version))
-+	  return -2;
-+
-+	acx_s_parse_configoption(adev, &co);
-+	acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */
-+	acx_display_hardware_details(adev);
-+
-+	return 0;
-+}
-+
-+static int acx_init_netdev(struct net_device *ndev, struct device *dev, int base_addr, int addr_size, int irq)
-+{
-+	const char *chip_name;
-+	int result = -EIO;
-+	int err;
-+	u8 chip_type;
-+	acx_device_t *adev = NULL;
-+ 
-+	FN_ENTER;
-+
-+	/* FIXME: prism54 calls pci_set_mwi() here,
-+	 * should we do/support the same? */
-+
-+	/* chiptype is u8 but id->driver_data is ulong
-+	** Works for now (possible values are 1 and 2) */
-+	chip_type = CHIPTYPE_ACX100;
-+	/* acx100 and acx111 have different PCI memory regions */
-+	if (chip_type == CHIPTYPE_ACX100) {
-+		chip_name = "ACX100";
-+	} else if (chip_type == CHIPTYPE_ACX111) {
-+		chip_name = "ACX111";
-+	} else {
-+		printk("acx: unknown chip type 0x%04X\n", chip_type);
-+		goto fail_unknown_chiptype;
-+	}
-+
-+	printk("acx: found %s-based wireless network card\n", chip_name);
-+	log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug);
-+
-+
-+	dev_set_drvdata(dev, ndev);
-+
-+	ether_setup(ndev);
-+
-+	ndev->irq = irq;
-+
-+	ndev->base_addr = base_addr;
-+printk (KERN_INFO "memwinbase=%lx memwinsize=%u\n",memwin.Base,memwin.Size);
-+	if (addr_size == 0 || ndev->irq == 0)
-+		goto fail_hw_params;
-+	ndev->open = &acxmem_e_open;
-+	ndev->stop = &acxmem_e_close;
-+	//pdev->dev.release = &acxmem_e_release;
-+	ndev->hard_start_xmit = &acx_i_start_xmit;
-+	ndev->get_stats = &acx_e_get_stats;
-+#if IW_HANDLER_VERSION <= 5
-+	ndev->get_wireless_stats = &acx_e_get_wireless_stats;
-+#endif
-+	ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
-+	ndev->set_multicast_list = &acxmem_i_set_multicast_list;
-+	ndev->tx_timeout = &acxmem_i_tx_timeout;
-+	ndev->change_mtu = &acx_e_change_mtu;
-+	ndev->watchdog_timeo = 4 * HZ;
-+
-+	adev = ndev2adev(ndev);
-+	spin_lock_init(&adev->lock);	/* initial state: unlocked */
-+	spin_lock_init(&adev->txbuf_lock);
-+	/* We do not start with downed sem: we want PARANOID_LOCKING to work */
-+	sema_init(&adev->sem, 1);	/* initial state: 1 (upped) */
-+	/* since nobody can see new netdev yet, we can as well
-+	** just _presume_ that we're under sem (instead of actually taking it): */
-+	/* acx_sem_lock(adev); */
-+	adev->dev = dev;
-+	adev->ndev = ndev;
-+	adev->dev_type = DEVTYPE_MEM;
-+	adev->chip_type = chip_type;
-+	adev->chip_name = chip_name;
-+	adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111;
-+	adev->membase = (volatile u32 *) ndev->base_addr;
-+	adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size);
-+	/* to find crashes due to weird driver access
-+	 * to unconfigured interface (ifup) */
-+	adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead;
-+
-+#if defined(NONESSENTIAL_FEATURES)
-+	acx_show_card_eeprom_id(adev);
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+#ifdef SET_MODULE_OWNER
-+	SET_MODULE_OWNER(ndev);
-+#endif
-+	// need to fix that @@
-+	SET_NETDEV_DEV(ndev, dev);
-+
-+	log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq);
-+
-+	/* ok, pci setup is finished, now start initializing the card */
-+
-+	if (OK != acxmem_complete_hw_reset (adev))
-+	  goto fail_reset;
-+
-+	/*
-+	 * Set up default things for most of the card settings.
-+	 */
-+	acx_s_set_defaults(adev);
-+
-+	/* Register the card, AFTER everything else has been set up,
-+	 * since otherwise an ioctl could step on our feet due to
-+	 * firmware operations happening in parallel or uninitialized data */
-+	err = register_netdev(ndev);
-+	if (OK != err) {
-+		printk("acx: register_netdev() FAILED: %d\n", err);
-+		goto fail_register_netdev;
-+	}
-+
-+	acx_proc_register_entries(ndev);
-+
-+	/* Now we have our device, so make sure the kernel doesn't try
-+	 * to send packets even though we're not associated to a network yet */
-+	acx_stop_queue(ndev, "on probe");
-+	acx_carrier_off(ndev, "on probe");
-+
-+	/*
-+	 * Set up a default monitor type so that poor combinations of initialization
-+	 * sequences in monitor mode don't end up destroying the hardware type.
-+	 */
-+	adev->monitor_type = ARPHRD_ETHER;
-+
-+	/*
-+	 * Register to receive inetaddr notifier changes.  This will allow us to
-+	 * catch if the user changes the MAC address of the interface.
-+	 */
-+	register_netdevice_notifier(&acx_netdev_notifier);
-+
-+	/* after register_netdev() userspace may start working with dev
-+	 * (in particular, on other CPUs), we only need to up the sem */
-+	/* acx_sem_unlock(adev); */
-+
-+	printk("acx "ACX_RELEASE": net device %s, driver compiled "
-+		"against wireless extensions %d and Linux %s\n",
-+		ndev->name, WIRELESS_EXT, UTS_RELEASE);
-+
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	result = OK;
-+	goto done;
-+
-+	/* error paths: undo everything in reverse order... */
-+
-+fail_register_netdev:
-+
-+	acxmem_s_delete_dma_regions(adev);
-+
-+fail_reset:
-+fail_hw_params:
-+	free_netdev(ndev);
-+fail_unknown_chiptype:
-+
-+
-+done:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_remove
-+**
-+** Shut device down (if not hot unplugged)
-+** and deallocate PCI resources for the acx chip.
-+**
-+** pdev - ptr to PCI device structure containing info about pci configuration
-+*/
-+static int __devexit
-+acxmem_e_remove(struct pcmcia_device *link)
-+{
-+	struct net_device *ndev;
-+	acx_device_t *adev;
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	ndev = ((local_info_t*)link->priv)->ndev;
-+	if (!ndev) {
-+		log(L_DEBUG, "%s: card is unused. Skipping any release code\n",
-+			__func__);
-+		goto end;
-+	}
-+
-+	adev = ndev2adev(ndev);
-+
-+	/* If device wasn't hot unplugged... */
-+	if (adev_present(adev)) {
-+
-+		acx_sem_lock(adev);
-+
-+		/* disable both Tx and Rx to shut radio down properly */
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+
-+#ifdef REDUNDANT
-+		/* put the eCPU to sleep to save power
-+		 * Halting is not possible currently,
-+		 * since not supported by all firmware versions */
-+		acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0);
-+#endif
-+		acx_lock(adev, flags);
-+
-+		/* disable power LED to save power :-) */
-+		log(L_INIT, "switching off power LED to save power\n");
-+		acxmem_l_power_led(adev, 0);
-+
-+		/* stop our eCPU */
-+		if (IS_ACX111(adev)) {
-+			/* FIXME: does this actually keep halting the eCPU?
-+			 * I don't think so...
-+			 */
-+			acxmem_l_reset_mac(adev);
-+		} else {
-+			u16 temp;
-+
-+			/* halt eCPU */
-+			temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1;
-+			write_reg16(adev, IO_ACX_ECPU_CTRL, temp);
-+			write_flush(adev);
-+		}
-+
-+		acx_unlock(adev, flags);
-+
-+		acx_sem_unlock(adev);
-+	}
-+
-+
-+	/*
-+	 * Unregister the notifier chain
-+	 */
-+	unregister_netdevice_notifier(&acx_netdev_notifier);
-+
-+	/* unregister the device to not let the kernel
-+	 * (e.g. ioctls) access a half-deconfigured device
-+	 * NB: this will cause acxmem_e_close() to be called,
-+	 * thus we shouldn't call it under sem! */
-+	log(L_INIT, "removing device %s\n", ndev->name);
-+	unregister_netdev(ndev);
-+
-+	/* unregister_netdev ensures that no references to us left.
-+	 * For paranoid reasons we continue to follow the rules */
-+	acx_sem_lock(adev);
-+
-+	if (adev->dev_state_mask & ACX_STATE_IFACE_UP) {
-+		acxmem_s_down(ndev);
-+		CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	}
-+
-+	acx_proc_unregister_entries(ndev);
-+
-+	acxmem_s_delete_dma_regions(adev);
-+
-+	/* finally, clean up PCI bus state */
-+	if (adev->iobase) iounmap((void *)adev->iobase);
-+
-+	acx_sem_unlock(adev);
-+
-+	/* Free netdev (quite late,
-+	 * since otherwise we might get caught off-guard
-+	 * by a netdev timeout handler execution
-+	 * expecting to see a working dev...) */
-+	free_netdev(ndev);
-+
-+	printk ("e_remove done\n");
-+end:
-+	FN_EXIT0;
-+
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** TODO: PM code needs to be fixed / debugged / tested.
-+*/
-+#ifdef CONFIG_PM
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxmem_e_suspend( struct net_device *ndev, pm_message_t state)
-+#else
-+acxmem_e_suspend( struct net_device *ndev, u32 state)
-+#endif
-+{
-+	FN_ENTER;
-+	acx_device_t *adev;
-+	printk("acx: suspend handler is experimental!\n");
-+	printk("sus: dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		goto end;
-+	// @@ need to get it from link or something like that
-+	adev = ndev2adev(ndev);
-+	printk("sus: adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	netif_device_detach(adev->ndev);	/* this one cannot sleep */
-+	acxmem_s_down(adev->ndev);
-+	/* down() does not set it to 0xffff, but here we really want that */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	acxmem_s_delete_dma_regions(adev);
-+
-+	/*
-+	 * Turn the ACX chip off.
-+	 */
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+static void
-+fw_resumer(struct work_struct *notused)
-+{
-+	acx_device_t *adev;
-+	struct net_device *ndev = resume_ndev;
-+
-+	printk("acx: resume handler is experimental!\n");
-+	printk("rsm: got dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		return;
-+
-+	adev = ndev2adev(ndev);
-+	printk("rsm: got adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	/*
-+	 * Turn on the ACX.
-+	 */
-+
-+	acxmem_complete_hw_reset (adev);
-+
-+	/*
-+	 * done by acx_s_set_defaults for initial startup
-+	 */
-+	acxmem_set_interrupt_mask(adev);
-+
-+	printk ("rsm: bringing up interface\n");
-+	SET_BIT (adev->set_mask, GETSET_ALL);
-+	acxmem_s_up(ndev);
-+	printk("rsm: acx up done\n");
-+
-+	/* now even reload all card parameters as they were before suspend,
-+	 * and possibly be back in the network again already :-) 
-+	 */
-+	/* - most settings updated in acxmem_s_up()
-+	if (ACX_STATE_IFACE_UP & adev->dev_state_mask) {
-+		adev->set_mask = GETSET_ALL;
-+		acx_s_update_card_settings(adev);
-+		printk("rsm: settings updated\n");
-+	}
-+	*/
-+	netif_device_attach(ndev);
-+	printk("rsm: device attached\n");
-+
-+	acx_sem_unlock(adev);
-+}
-+
-+DECLARE_WORK( fw_resume_work, fw_resumer );
-+
-+static int
-+acxmem_e_resume(struct pcmcia_device *link)
-+{
-+	FN_ENTER;
-+
-+	//resume_pdev = pdev;
-+	schedule_work( &fw_resume_work );
-+
-+	FN_EXIT0;
-+	return OK;
-+}
-+#endif /* CONFIG_PM */
-+
-+
-+/***********************************************************************
-+** acxmem_s_up
-+**
-+** This function is called by acxmem_e_open (when ifconfig sets the device as up)
-+**
-+** Side effects:
-+** - Enables on-card interrupt requests
-+** - calls acx_s_start
-+*/
-+
-+static void
-+enable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask);
-+	write_reg16(adev, IO_ACX_FEMR, 0x8000);
-+	adev->irqs_active = 1;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxmem_s_up(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+	enable_acx_irq(adev);
-+	acx_unlock(adev, flags);
-+
-+	/* acx fw < 1.9.3.e has a hardware timer, and older drivers
-+	** used to use it. But we don't do that anymore, our OS
-+	** has reliable software timers */
-+	init_timer(&adev->mgmt_timer);
-+	adev->mgmt_timer.function = acx_i_timer;
-+	adev->mgmt_timer.data = (unsigned long)adev;
-+
-+	/* Need to set ACX_STATE_IFACE_UP first, or else
-+	** timer won't be started by acx_set_status() */
-+	SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_2_STA:
-+		/* actual scan cmd will happen in start() */
-+		acx_set_status(adev, ACX_STATUS_1_SCANNING); break;
-+	case ACX_MODE_3_AP:
-+	case ACX_MODE_MONITOR:
-+		acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break;
-+	}
-+
-+	acx_s_start(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_down
-+**
-+** This disables the netdevice
-+**
-+** Side effects:
-+** - disables on-card interrupt request
-+*/
-+
-+static void
-+disable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+
-+	/* I guess mask is not 0xffff because acx100 won't signal
-+	** cmd completion then (needed for ifup).
-+	** Someone with acx100 please confirm */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	adev->irqs_active = 0;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxmem_s_down(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	/* Disable IRQs first, so that IRQs cannot race with us */
-+	/* then wait until interrupts have finished executing on other CPUs */
-+	acx_lock(adev, flags);
-+	disable_acx_irq(adev);
-+	synchronize_irq(adev->pdev->irq);
-+	acx_unlock(adev, flags);
-+
-+	/* we really don't want to have an asynchronous tasklet disturb us
-+	** after something vital for its job has been shut down, so
-+	** end all remaining work now.
-+	**
-+	** NB: carrier_off (done by set_status below) would lead to
-+	** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK().
-+	** That's why we do FLUSH first.
-+	**
-+	** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK()
-+	** waits for acx_e_after_interrupt_task to complete if it is running
-+	** on another CPU, but acx_e_after_interrupt_task
-+	** will sleep on sem forever, because it is taken by us!
-+	** Work around that by temporary sem unlock.
-+	** This will fail miserably if we'll be hit by concurrent
-+	** iwconfig or something in between. TODO! */
-+	acx_sem_unlock(adev);
-+	FLUSH_SCHEDULED_WORK();
-+	acx_sem_lock(adev);
-+
-+	/* This is possible:
-+	** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task ->
-+	** -> set_status(ASSOCIATED) -> wake_queue()
-+	** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK
-+	** lock/unlock is just paranoia, maybe not needed */
-+	acx_lock(adev, flags);
-+	acx_stop_queue(ndev, "on ifdown");
-+	acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+	acx_unlock(adev, flags);
-+
-+	/* kernel/timer.c says it's illegal to del_timer_sync()
-+	** a timer which restarts itself. We guarantee this cannot
-+	** ever happen because acx_i_timer() never does this if
-+	** status is ACX_STATUS_0_STOPPED */
-+	del_timer_sync(&adev->mgmt_timer);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_open
-+**
-+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP
-+** from clear to set. In other words: ifconfig up.
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxmem_e_open(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_init_task_scheduler(adev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */
-+
-+#if 0
-+	/* request shared IRQ handler */
-+	if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) {
-+		printk("%s: request_irq FAILED\n", ndev->name);
-+		result = -EAGAIN;
-+		goto done;
-+	}
-+	set_irq_type (ndev->irq, IRQT_FALLING);
-+	log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq);
-+#endif
-+
-+	/* ifup device */
-+	acxmem_s_up(ndev);
-+
-+	/* We don't currently have to do anything else.
-+	 * The setup of the MAC should be subsequently completed via
-+	 * the mlme commands.
-+	 * Higher layers know we're ready from dev->start==1 and
-+	 * dev->tbusy==0.  Our rx path knows to pass up received/
-+	 * frames because of dev->flags&IFF_UP is true.
-+	 */
-+done:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_close
-+**
-+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
-+** from set to clear. I.e. called by "ifconfig DEV down"
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxmem_e_close(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* ifdown device */
-+	CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	if (netif_device_present(ndev)) {
-+		acxmem_s_down(ndev);
-+	}
-+
-+	/* disable all IRQs, release shared IRQ handler */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	free_irq(ndev->irq, ndev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */
-+
-+	/* We currently don't have to do anything else.
-+	 * Higher layers know we're not ready from dev->start==0 and
-+	 * dev->tbusy==1.  Our rx path knows to not pass up received
-+	 * frames because of dev->flags&IFF_UP is false.
-+	 */
-+	acx_sem_unlock(adev);
-+
-+	log(L_INIT, "closed device\n");
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_tx_timeout
-+**
-+** Called from network core. Must not sleep!
-+*/
-+static void
-+acxmem_i_tx_timeout(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	unsigned int tx_num_cleaned;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* clean processed tx descs, they may have been completely full */
-+	tx_num_cleaned = acxmem_l_clean_txdesc(adev);
-+
-+	/* nothing cleaned, yet (almost) no free buffers available?
-+	 * --> clean all tx descs, no matter which status!!
-+	 * Note that I strongly suspect that doing emergency cleaning
-+	 * may confuse the firmware. This is a last ditch effort to get
-+	 * ANYTHING to work again...
-+	 *
-+	 * TODO: it's best to simply reset & reinit hw from scratch...
-+	 */
-+	if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) {
-+		printk("%s: FAILED to free any of the many full tx buffers. "
-+			"Switching to emergency freeing. "
-+			"Please report!\n", ndev->name);
-+		acxmem_l_clean_txdesc_emergency(adev);
-+	}
-+
-+	if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status))
-+		acx_wake_queue(ndev, "after tx timeout");
-+
-+	/* stall may have happened due to radio drift, so recalib radio */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+
-+	/* do unimportant work last */
-+	printk("%s: tx timeout!\n", ndev->name);
-+	adev->stats.tx_errors++;
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_set_multicast_list
-+** FIXME: most likely needs refinement
-+*/
-+static void
-+acxmem_i_set_multicast_list(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* firmwares don't have allmulti capability,
-+	 * so just use promiscuous mode instead in this case. */
-+	if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
-+		SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		/* let kernel know in case *we* needed to set promiscuous */
-+		ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI);
-+	} else {
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI);
-+	}
-+
-+	/* cannot update card settings directly here, atomic context */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_l_process_rxdesc
-+**
-+** Called directly and only from the IRQ handler
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_rxbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_rxbuffer(const acx_device_t *adev)
-+{
-+	register const struct rxhostdesc *rxhostdesc;
-+	int i;
-+	/* no FN_ENTER here, we don't want that */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+	if (unlikely(!rxhostdesc)) return;
-+	for (i = 0; i < RX_CNT; i++) {
-+		if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			printk("rx: buf %d full\n", i);
-+		rxhostdesc++;
-+	}
-+}
-+#endif
-+
-+static void
-+acxmem_l_process_rxdesc(acx_device_t *adev)
-+{
-+	register rxhostdesc_t *hostdesc;
-+	register rxdesc_t *rxdesc;
-+	unsigned count, tail;
-+	u32 addr;
-+	u8 Ctl_8;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(acx_debug & L_BUFR))
-+		log_rxbuffer(adev);
-+
-+	/* First, have a loop to determine the first descriptor that's
-+	 * full, just in case there's a mismatch between our current
-+	 * rx_tail and the full descriptor we're supposed to handle. */
-+	tail = adev->rx_tail;
-+	count = RX_CNT;
-+	while (1) {
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		rxdesc = &adev->rxdesc_start[tail];
-+		/* advance tail regardless of outcome of the below test */
-+		tail = (tail + 1) % RX_CNT;
-+
-+		/*
-+		 * Unlike the PCI interface, where the ACX can write directly to
-+		 * the host descriptors, on the slave memory interface we have to
-+		 * pull these.  All we really need to do is check the Ctl_8 field
-+		 * in the rx descriptor on the ACX, which should be 0x11000000 if
-+		 * we should process it.
-+		 */
-+		Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+                if ((Ctl_8 & DESC_CTL_HOSTOWN) &&
-+		    (Ctl_8 & DESC_CTL_ACXDONE))
-+		  break;		/* found it! */
-+
-+		if (unlikely(!--count))	/* hmm, no luck: all descs empty, bail out */
-+			goto end;
-+	}
-+
-+	/* now process descriptors, starting with the first we figured out */
-+	while (1) {
-+		log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n",	tail, Ctl_8);
-+		/*
-+		 * If the ACX has CTL_RECLAIM set on this descriptor there
-+		 * is no buffer associated; it just wants us to tell it to
-+		 * reclaim the memory.
-+		 */
-+		if (!(Ctl_8 & DESC_CTL_RECLAIM)) {
-+
-+		  /*
-+		 * slave interface - pull data now
-+		 */
-+		hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length));
-+
-+		/*
-+		 * hostdesc->data is an rxbuffer_t, which includes header information,
-+		 * but the length in the data packet doesn't.  The header information
-+		 * takes up an additional 12 bytes, so add that to the length we copy.
-+		 */
-+		addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr));
-+		  if (addr) {
-+		    /*
-+		     * How can &(rxdesc->ACXMemPtr) above ever be zero?  Looks like we
-+		     * get that now and then - try to trap it for debug.
-+		     */
-+		    if (addr & 0xffff0000) {
-+		      printk("rxdesc 0x%08x\n", (u32) rxdesc);
-+		      dump_acxmem (adev, 0, 0x10000);
-+		      panic ("Bad access!");
-+		    }
-+		  chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr,
-+					   hostdesc->length +
-+					   (u32) &((rxbuffer_t *)0)->hdr_a3);
-+		acx_l_process_rxbuf(adev, hostdesc->data);
-+		  }
-+		}
-+		else {
-+		  printk ("rx reclaim only!\n");
-+		}
-+
-+		hostdesc->Status = 0;
-+
-+		/*
-+		 * Let the ACX know we're done.
-+		 */
-+		CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN);
-+                SET_BIT (Ctl_8, DESC_CTL_HOSTDONE);
-+		SET_BIT (Ctl_8, DESC_CTL_RECLAIM);
-+		write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8);
-+
-+		/*
-+		 * Now tell the ACX we've finished with the receive buffer so 
-+		 * it can finish the reclaim.
-+		 */
-+		write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC);
-+
-+		/* ok, descriptor is handled, now check the next descriptor */
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		rxdesc = &adev->rxdesc_start[tail];
-+
-+		Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+
-+		/* if next descriptor is empty, then bail out */
-+		if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE))
-+			break;
-+
-+		tail = (tail + 1) % RX_CNT;
-+	}
-+end:
-+	adev->rx_tail = tail;
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_interrupt
-+**
-+** IRQ handler (atomic context, must not sleep, blah, blah)
-+*/
-+
-+/* scan is complete. all frames now on the receive queue are valid */
-+#define INFO_SCAN_COMPLETE      0x0001
-+#define INFO_WEP_KEY_NOT_FOUND  0x0002
-+/* hw has been reset as the result of a watchdog timer timeout */
-+#define INFO_WATCH_DOG_RESET    0x0003
-+/* failed to send out NULL frame from PS mode notification to AP */
-+/* recommended action: try entering 802.11 PS mode again */
-+#define INFO_PS_FAIL            0x0004
-+/* encryption/decryption process on a packet failed */
-+#define INFO_IV_ICV_FAILURE     0x0005
-+
-+/* Info mailbox format:
-+2 bytes: type
-+2 bytes: status
-+more bytes may follow
-+    rumors say about status:
-+	0x0000 info available (set by hw)
-+	0x0001 information received (must be set by host)
-+	0x1000 info available, mailbox overflowed (messages lost) (set by hw)
-+    but in practice we've seen:
-+	0x9000 when we did not set status to 0x0001 on prev message
-+	0x1001 when we did set it
-+	0x0000 was never seen
-+    conclusion: this is really a bitfield:
-+    0x1000 is 'info available' bit
-+    'mailbox overflowed' bit is 0x8000, not 0x1000
-+    value of 0x0000 probably means that there are no messages at all
-+    P.S. I dunno how in hell hw is supposed to notice that messages are lost -
-+    it does NOT clear bit 0x0001, and this bit will probably stay forever set
-+    after we set it once. Let's hope this will be fixed in firmware someday
-+*/
-+
-+static void
-+handle_info_irq(acx_device_t *adev)
-+{
-+#if ACX_DEBUG
-+	static const char * const info_type_msg[] = {
-+		"(unknown)",
-+		"scan complete",
-+		"WEP key not found",
-+		"internal watchdog reset was done",
-+		"failed to send powersave (NULL frame) notification to AP",
-+		"encrypt/decrypt on a packet has failed",
-+		"TKIP tx keys disabled",
-+		"TKIP rx keys disabled",
-+		"TKIP rx: key ID not found",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"TKIP IV value exceeds thresh"
-+	};
-+#endif
-+	u32 info_type, info_status;
-+
-+	info_type = read_slavemem32 (adev, (u32) adev->info_area);
-+
-+	info_status = (info_type >> 16);
-+	info_type = (u16)info_type;
-+
-+	/* inform fw that we have read this info message */
-+	write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000);
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK);
-+	write_flush(adev);
-+
-+	log(L_CTL, "info_type:%04X info_status:%04X\n",
-+			info_type, info_status);
-+
-+	log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n",
-+		info_status, info_type,
-+		info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ?
-+				0 : info_type]
-+	);
-+}
-+
-+
-+static void
-+log_unusual_irq(u16 irqtype) {
-+	/*
-+	if (!printk_ratelimit())
-+		return;
-+	*/
-+
-+	printk("acx: got");
-+	if (irqtype & HOST_INT_TX_XFER) {
-+		printk(" Tx_Xfer");
-+	}
-+	if (irqtype & HOST_INT_RX_COMPLETE) {
-+		printk(" Rx_Complete");
-+	}
-+	if (irqtype & HOST_INT_DTIM) {
-+		printk(" DTIM");
-+	}
-+	if (irqtype & HOST_INT_BEACON) {
-+		printk(" Beacon");
-+	}
-+	if (irqtype & HOST_INT_TIMER) {
-+		log(L_IRQ, " Timer");
-+	}
-+	if (irqtype & HOST_INT_KEY_NOT_FOUND) {
-+		printk(" Key_Not_Found");
-+	}
-+	if (irqtype & HOST_INT_IV_ICV_FAILURE) {
-+		printk(" IV_ICV_Failure (crypto)");
-+	}
-+		/* HOST_INT_CMD_COMPLETE  */
-+		/* HOST_INT_INFO          */
-+	if (irqtype & HOST_INT_OVERFLOW) {
-+		printk(" Overflow");
-+	}
-+	if (irqtype & HOST_INT_PROCESS_ERROR) {
-+		printk(" Process_Error");
-+	}
-+		/* HOST_INT_SCAN_COMPLETE */
-+	if (irqtype & HOST_INT_FCS_THRESHOLD) {
-+		printk(" FCS_Threshold");
-+	}
-+	if (irqtype & HOST_INT_UNKNOWN) {
-+		printk(" Unknown");
-+	}
-+	printk(" IRQ(s)\n");
-+}
-+
-+
-+static void
-+update_link_quality_led(acx_device_t *adev)
-+{
-+	int qual;
-+
-+	qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise);
-+	if (qual > adev->brange_max_quality)
-+		qual = adev->brange_max_quality;
-+
-+	if (time_after(jiffies, adev->brange_time_last_state_change +
-+				(HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) {
-+		acxmem_l_power_led(adev, (adev->brange_last_state == 0));
-+		adev->brange_last_state ^= 1; /* toggle */
-+		adev->brange_time_last_state_change = jiffies;
-+	}
-+}
-+
-+
-+#define MAX_IRQLOOPS_PER_JIFFY  (20000/HZ) /* a la orinoco.c */
-+
-+static irqreturn_t
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxmem_i_interrupt(int irq, void *dev_id)
-+#else
-+acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	unsigned long flags;
-+	unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY;
-+	register u16 irqtype;
-+	u16 unmasked;
-+
-+	adev = ndev2adev((struct net_device*)dev_id);
-+
-+	/* LOCKING: can just spin_lock() since IRQs are disabled anyway.
-+	 * I am paranoid */
-+	acx_lock(adev, flags);
-+
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	if (unlikely(0xffff == unmasked)) {
-+		/* 0xffff value hints at missing hardware,
-+		 * so don't do anything.
-+		 * Not very clean, but other drivers do the same... */
-+		log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n");
-+		goto none;
-+	}
-+
-+	/* We will check only "interesting" IRQ types */
-+	irqtype = unmasked & ~adev->irq_mask;
-+	if (!irqtype) {
-+		/* We are on a shared IRQ line and it wasn't our IRQ */
-+		log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n",
-+			unmasked, adev->irq_mask);
-+		goto none;
-+	}
-+
-+	/* Done here because IRQ_NONEs taking three lines of log
-+	** drive me crazy */
-+	FN_ENTER;
-+
-+#define IRQ_ITERATE 1
-+#if IRQ_ITERATE
-+if (jiffies != adev->irq_last_jiffies) {
-+	adev->irq_loops_this_jiffy = 0;
-+	adev->irq_last_jiffies = jiffies;
-+}
-+
-+/* safety condition; we'll normally abort loop below
-+ * in case no IRQ type occurred */
-+while (likely(--irqcount)) {
-+#endif
-+	/* ACK all IRQs ASAP */
-+	write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff);
-+
-+	log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n",
-+				unmasked, adev->irq_mask, irqtype);
-+
-+	/* Handle most important IRQ types first */
-+	if (irqtype & HOST_INT_RX_DATA) {
-+		log(L_IRQ, "got Rx_Data IRQ\n");
-+		acxmem_l_process_rxdesc(adev);
-+	}
-+	if (irqtype & HOST_INT_TX_COMPLETE) {
-+		log(L_IRQ, "got Tx_Complete IRQ\n");
-+		/* don't clean up on each Tx complete, wait a bit
-+		 * unless we're going towards full, in which case
-+		 * we do it immediately, too (otherwise we might lockup
-+		 * with a full Tx buffer if we go into
-+		 * acxmem_l_clean_txdesc() at a time when we won't wakeup
-+		 * the net queue in there for some reason...) */
-+		if (adev->tx_free <= TX_START_CLEAN) {
-+#if TX_CLEANUP_IN_SOFTIRQ
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP);
-+#else
-+			acxmem_l_clean_txdesc(adev);
-+#endif
-+		}
-+	}
-+
-+	/* Less frequent ones */
-+	if (irqtype & (0
-+		| HOST_INT_CMD_COMPLETE
-+		| HOST_INT_INFO
-+		| HOST_INT_SCAN_COMPLETE
-+	)) {
-+		if (irqtype & HOST_INT_CMD_COMPLETE) {
-+			log(L_IRQ, "got Command_Complete IRQ\n");
-+			/* save the state for the running issue_cmd() */
-+			SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE);
-+		}
-+		if (irqtype & HOST_INT_INFO) {
-+			handle_info_irq(adev);
-+		}
-+		if (irqtype & HOST_INT_SCAN_COMPLETE) {
-+			log(L_IRQ, "got Scan_Complete IRQ\n");
-+			/* need to do that in process context */
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN);
-+			/* remember that fw is not scanning anymore */
-+			SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+		}
-+	}
-+
-+	/* These we just log, but either they happen rarely
-+	 * or we keep them masked out */
-+	if (irqtype & (0
-+		/* | HOST_INT_RX_DATA */
-+		/* | HOST_INT_TX_COMPLETE   */
-+		| HOST_INT_TX_XFER
-+		| HOST_INT_RX_COMPLETE
-+		| HOST_INT_DTIM
-+		| HOST_INT_BEACON
-+		| HOST_INT_TIMER
-+		| HOST_INT_KEY_NOT_FOUND
-+		| HOST_INT_IV_ICV_FAILURE
-+		/* | HOST_INT_CMD_COMPLETE  */
-+		/* | HOST_INT_INFO          */
-+		| HOST_INT_OVERFLOW
-+		| HOST_INT_PROCESS_ERROR
-+		/* | HOST_INT_SCAN_COMPLETE */
-+		| HOST_INT_FCS_THRESHOLD
-+		| HOST_INT_UNKNOWN
-+	)) {
-+		log_unusual_irq(irqtype);
-+	}
-+
-+#if IRQ_ITERATE
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	irqtype = unmasked & ~adev->irq_mask;
-+	/* Bail out if no new IRQ bits or if all are masked out */
-+	if (!irqtype)
-+		break;
-+
-+	if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) {
-+		printk(KERN_ERR "acx: too many interrupts per jiffy!\n");
-+		/* Looks like card floods us with IRQs! Try to stop that */
-+		write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+		/* This will short-circuit all future attempts to handle IRQ.
-+		 * We cant do much more... */
-+		adev->irq_mask = 0;
-+		break;
-+	}
-+}
-+#endif
-+	/* Routine to perform blink with range */
-+	if (unlikely(adev->led_power == 2))
-+		update_link_quality_led(adev);
-+
-+/* handled: */
-+	/* write_flush(adev); - not needed, last op was read anyway */
-+	acx_unlock(adev, flags);
-+	FN_EXIT0;
-+	return IRQ_HANDLED;
-+
-+none:
-+	acx_unlock(adev, flags);
-+	return IRQ_NONE;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_power_led
-+*/
-+void
-+acxmem_l_power_led(acx_device_t *adev, int enable)
-+{
-+	u16 gpio_pled =	IS_ACX111(adev) ? 0x0040 : 0x0800;
-+
-+	/* A hack. Not moving message rate limiting to adev->xxx
-+	 * (it's only a debug message after all) */
-+	static int rate_limit = 0;
-+
-+	if (rate_limit++ < 3)
-+		log(L_IOCTL, "Please report in case toggling the power "
-+				"LED doesn't work for your card!\n");
-+	if (enable)
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled);
-+	else
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled);
-+}
-+
-+
-+/***********************************************************************
-+** Ioctls
-+*/
-+
-+/***********************************************************************
-+*/
-+int
-+acx111pci_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+#if ACX_DEBUG > 1
-+	acx_device_t *adev = ndev2adev(ndev);
-+	rxdesc_t *rxdesc;
-+	txdesc_t *txdesc;
-+	rxhostdesc_t *rxhostdesc;
-+	txhostdesc_t *txhostdesc;
-+	struct acx111_ie_memoryconfig memconf;
-+	struct acx111_ie_queueconfig queueconf;
-+	unsigned long flags;
-+	int i;
-+	char memmap[0x34];
-+	char rxconfig[0x8];
-+	char fcserror[0x8];
-+	char ratefallback[0x5];
-+
-+	if ( !(acx_debug & (L_IOCTL|L_DEBUG)) )
-+		return OK;
-+	/* using printk() since we checked debug flag already */
-+
-+	acx_sem_lock(adev);
-+
-+	if (!IS_ACX111(adev)) {
-+		printk("acx111-specific function called "
-+			"with non-acx111 chip, aborting\n");
-+		goto end_ok;
-+	}
-+
-+	/* get Acx111 Memory Configuration */
-+	memset(&memconf, 0, sizeof(memconf));
-+	/* BTW, fails with 12 (Write only) error code.
-+	** Retained for easy testing of issue_cmd error handling :) */
-+	printk ("Interrogating queue config\n");
-+	acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG);
-+	printk ("done with queue config\n");
-+
-+	/* get Acx111 Queue Configuration */
-+	memset(&queueconf, 0, sizeof(queueconf));
-+	printk ("Interrogating mem config options\n");
-+	acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS);
-+	printk ("done with mem config options\n");
-+
-+	/* get Acx111 Memory Map */
-+	memset(memmap, 0, sizeof(memmap));
-+	printk ("Interrogating mem map\n");
-+	acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP);
-+	printk ("done with mem map\n");
-+
-+	/* get Acx111 Rx Config */
-+	memset(rxconfig, 0, sizeof(rxconfig));
-+	printk ("Interrogating rxconfig\n");
-+	acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG);
-+	printk ("done with queue rxconfig\n");
-+
-+	/* get Acx111 fcs error count */
-+	memset(fcserror, 0, sizeof(fcserror));
-+	printk ("Interrogating fcs err count\n");
-+	acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT);
-+	printk ("done with err count\n");
-+
-+	/* get Acx111 rate fallback */
-+	memset(ratefallback, 0, sizeof(ratefallback));
-+	printk ("Interrogating rate fallback\n");
-+	acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK);
-+	printk ("done with rate fallback\n");
-+
-+	/* force occurrence of a beacon interrupt */
-+	/* TODO: comment why is this necessary */
-+	write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON);
-+
-+	/* dump Acx111 Mem Configuration */
-+	printk("dump mem config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Number of stations: %1X\n"
-+		"Memory block size: %1X\n"
-+		"tx/rx memory block allocation: %1X\n"
-+		"count rx: %X / tx: %X queues\n"
-+		"options %1X\n"
-+		"fragmentation %1X\n"
-+		"Rx Queue 1 Count Descriptors: %X\n"
-+		"Rx Queue 1 Host Memory Start: %X\n"
-+		"Tx Queue 1 Count Descriptors: %X\n"
-+		"Tx Queue 1 Attributes: %X\n",
-+		memconf.len, (int) sizeof(memconf),
-+		memconf.no_of_stations,
-+		memconf.memory_block_size,
-+		memconf.tx_rx_memory_block_allocation,
-+		memconf.count_rx_queues, memconf.count_tx_queues,
-+		memconf.options,
-+		memconf.fragmentation,
-+		memconf.rx_queue1_count_descs,
-+	acx2cpu(memconf.rx_queue1_host_rx_start),
-+		memconf.tx_queue1_count_descs,
-+		memconf.tx_queue1_attributes);
-+
-+	/* dump Acx111 Queue Configuration */
-+	printk("dump queue head:\n"
-+		"data read: %d, struct size: %d\n"
-+		"tx_memory_block_address (from card): %X\n"
-+		"rx_memory_block_address (from card): %X\n"
-+		"rx1_queue address (from card): %X\n"
-+		"tx1_queue address (from card): %X\n"
-+		"tx1_queue attributes (from card): %X\n",
-+		queueconf.len, (int) sizeof(queueconf),
-+		queueconf.tx_memory_block_address,
-+		queueconf.rx_memory_block_address,
-+		queueconf.rx1_queue_address,
-+		queueconf.tx1_queue_address,
-+		queueconf.tx1_attributes);
-+
-+	/* dump Acx111 Mem Map */
-+	printk("dump mem map:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Code start: %X\n"
-+		"Code end: %X\n"
-+		"WEP default key start: %X\n"
-+		"WEP default key end: %X\n"
-+		"STA table start: %X\n"
-+		"STA table end: %X\n"
-+		"Packet template start: %X\n"
-+		"Packet template end: %X\n"
-+		"Queue memory start: %X\n"
-+		"Queue memory end: %X\n"
-+		"Packet memory pool start: %X\n"
-+		"Packet memory pool end: %X\n"
-+		"iobase: %p\n"
-+		"iobase2: %p\n",
-+		*((u16 *)&memmap[0x02]), (int) sizeof(memmap),
-+		*((u32 *)&memmap[0x04]),
-+		*((u32 *)&memmap[0x08]),
-+		*((u32 *)&memmap[0x0C]),
-+		*((u32 *)&memmap[0x10]),
-+		*((u32 *)&memmap[0x14]),
-+		*((u32 *)&memmap[0x18]),
-+		*((u32 *)&memmap[0x1C]),
-+		*((u32 *)&memmap[0x20]),
-+		*((u32 *)&memmap[0x24]),
-+		*((u32 *)&memmap[0x28]),
-+		*((u32 *)&memmap[0x2C]),
-+		*((u32 *)&memmap[0x30]),
-+		adev->iobase,
-+		adev->iobase2);
-+
-+	/* dump Acx111 Rx Config */
-+	printk("dump rx config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"rx config: %X\n"
-+		"rx filter config: %X\n",
-+		*((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig),
-+		*((u16 *)&rxconfig[0x04]),
-+		*((u16 *)&rxconfig[0x06]));
-+
-+	/* dump Acx111 fcs error */
-+	printk("dump fcserror:\n"
-+		"data read: %d, struct size: %d\n"
-+		"fcserrors: %X\n",
-+		*((u16 *)&fcserror[0x02]), (int) sizeof(fcserror),
-+		*((u32 *)&fcserror[0x04]));
-+
-+	/* dump Acx111 rate fallback */
-+	printk("dump rate fallback:\n"
-+		"data read: %d, struct size: %d\n"
-+		"ratefallback: %X\n",
-+		*((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback),
-+		*((u8 *)&ratefallback[0x04]));
-+
-+	/* protect against IRQ */
-+	acx_lock(adev, flags);
-+
-+	/* dump acx111 internal rx descriptor ring buffer */
-+	rxdesc = adev->rxdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump internal rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n"
-+			"RxStatus (dynamic) 0x%X\n"
-+			"Mod/Pre (dynamic) 0x%X\n",
-+			i,
-+			rxdesc,
-+			acx2cpu(rxdesc->pNextDesc),
-+			acx2cpu(rxdesc->ACXMemPtr),
-+			rxdesc->Ctl_8,
-+			rxdesc->rate,
-+			rxdesc->error,
-+			rxdesc->SNR);
-+		rxdesc++;
-+	}
-+
-+	/* dump host rx descriptor ring buffer */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxhostdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump host rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			rxhostdesc,
-+			acx2cpu(rxhostdesc->data_phy),
-+			rxhostdesc->data_offset,
-+			le16_to_cpu(rxhostdesc->Ctl_16),
-+			le16_to_cpu(rxhostdesc->length),
-+			acx2cpu(rxhostdesc->desc_phy_next),
-+			rxhostdesc->Status);
-+		rxhostdesc++;
-+	}
-+
-+	/* dump acx111 internal tx descriptor ring buffer */
-+	txdesc = adev->txdesc_start;
-+
-+	/* loop over complete transmit pool */
-+	if (txdesc) for (i = 0; i < TX_CNT; i++) {
-+		printk("\ndump internal txdesc %d:\n"
-+			"size 0x%X\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"host mem pointer (dynamic) 0x%X\n"
-+			"length (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"CTL2 (dynamic) 0x%X\n"
-+			"Status (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n",
-+			i,
-+			(int) sizeof(struct txdesc),
-+			txdesc,
-+			acx2cpu(txdesc->pNextDesc),
-+			acx2cpu(txdesc->AcxMemPtr),
-+			acx2cpu(txdesc->HostMemPtr),
-+			le16_to_cpu(txdesc->total_length),
-+			txdesc->Ctl_8,
-+			txdesc->Ctl2_8, txdesc->error,
-+			txdesc->u.r1.rate);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+
-+	/* dump host tx descriptor ring buffer */
-+
-+	txhostdesc = adev->txhostdesc_start;
-+
-+	/* loop over complete host send pool */
-+	if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) {
-+		printk("\ndump host txdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			txhostdesc,
-+			acx2cpu(txhostdesc->data_phy),
-+			txhostdesc->data_offset,
-+			le16_to_cpu(txhostdesc->Ctl_16),
-+			le16_to_cpu(txhostdesc->length),
-+			acx2cpu(txhostdesc->desc_phy_next),
-+			le32_to_cpu(txhostdesc->Status));
-+		txhostdesc++;
-+	}
-+
-+	/* write_reg16(adev, 0xb4, 0x4); */
-+
-+	acx_unlock(adev, flags);
-+end_ok:
-+
-+	acx_sem_unlock(adev);
-+#endif /* ACX_DEBUG */
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100mem_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	u16 gpio_old;
-+
-+	if (!IS_ACX100(adev)) {
-+		/* WARNING!!!
-+		 * Removing this check *might* damage
-+		 * hardware, since we're tweaking GPIOs here after all!!!
-+		 * You've been warned...
-+		 * WARNING!!! */
-+		printk("acx: sorry, setting bias level for non-acx100 "
-+			"is not supported yet\n");
-+		return OK;
-+	}
-+
-+	if (*extra > 7)	{
-+		printk("acx: invalid bias parameter, range is 0-7\n");
-+		return -EINVAL;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	/* Need to lock accesses to [IO_ACX_GPIO_OUT]:
-+	 * IRQ handler uses it to update LED */
-+	acx_lock(adev, flags);
-+	gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT);
-+	write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8));
-+	acx_unlock(adev, flags);
-+
-+	log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old);
-+	printk("%s: PHY power amplifier bias: old:%d, new:%d\n",
-+		ndev->name,
-+		(gpio_old & 0x0700) >> 8, (unsigned char)*extra);
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+/***************************************************************
-+** acxmem_l_alloc_tx
-+** Actually returns a txdesc_t* ptr
-+**
-+** FIXME: in case of fragments, should allocate multiple descrs
-+** after figuring out how many we need and whether we still have
-+** sufficiently many.
-+*/
-+tx_t*
-+acxmem_l_alloc_tx(acx_device_t *adev)
-+{
-+	struct txdesc *txdesc;
-+	unsigned head;
-+	u8 ctl8;
-+	static int txattempts = 0;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!adev->tx_free)) {
-+		printk("acx: BUG: no free txdesc left\n");
-+		/*
-+		 * Probably the ACX ignored a transmit attempt and now there's a packet
-+		 * sitting in the queue we think should be transmitting but the ACX doesn't
-+		 * know about.
-+		 * On the first pass, send the ACX a TxProc interrupt to try moving
-+		 * things along, and if that doesn't work (ie, we get called again) completely
-+		 * flush the transmit queue.
-+		 */
-+		if (txattempts < 10) {
-+		  txattempts++;
-+		  printk ("acx: trying to wake up ACX\n");
-+		  write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+		  write_flush(adev);		}
-+		else  {
-+		  txattempts = 0;
-+		  printk ("acx: flushing transmit queue.\n");
-+		  acxmem_l_clean_txdesc_emergency (adev);
-+		}
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/*
-+	 * Make a quick check to see if there is transmit buffer space on
-+	 * the ACX.  This can't guarantee there is enough space for the packet
-+	 * since we don't yet know how big it is, but it will prevent at least some
-+	 * annoyances.
-+	 */
-+	if (!adev->acx_txbuf_blocks_free) {
-+	  txdesc = NULL;
-+	  goto end;
-+	}
-+
-+	head = adev->tx_head;
-+	/*
-+	 * txdesc points to ACX memory
-+	 */
-+	txdesc = get_txdesc(adev, head);
-+	ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+
-+	/* 
-+	 * If we don't own the buffer (HOSTOWN) it is certainly not free; however,
-+	 * we may have previously thought we had enough memory to send
-+	 * a packet, allocated the buffer then gave up when we found not enough
-+	 * transmit buffer space on the ACX. In that case, HOSTOWN and
-+	 * ACXDONE will both be set.
-+	 */
-+	if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) {
-+		/* whoops, descr at current index is not free, so probably
-+		 * ring buffer already full */
-+                printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find "
-+                        "free txdesc\n", head, ctl8);
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/* Needed in case txdesc won't be eventually submitted for tx */
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN);
-+
-+	adev->tx_free--;
-+	log(L_BUFT, "tx: got desc %u, %u remain\n",
-+			head, adev->tx_free);
-+	/* Keep a few free descs between head and tail of tx ring.
-+	** It is not absolutely needed, just feels safer */
-+	if (adev->tx_free < TX_STOP_QUEUE) {
-+		log(L_BUF, "stop queue (%u tx desc left)\n",
-+				adev->tx_free);
-+		acx_stop_queue(adev->ndev, NULL);
-+	}
-+
-+	/* returning current descriptor, so advance to next free one */
-+	adev->tx_head = (head + 1) % TX_CNT;
-+end:
-+	FN_EXIT0;
-+
-+	return (tx_t*)txdesc;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_l_dealloc_tx
-+** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque);
-+ transmit descriptor.  The ACX
-+** can get confused if we skip transmit descriptors in the queue,
-+** so when we don't need a descriptor return it to its original
-+** state and move the queue head pointer back.
-+**
-+*/
-+void
-+acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque)
-+{
-+  /*
-+   * txdesc is the address of the descriptor on the ACX.
-+   */
-+  txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+  txdesc_t tmptxdesc;
-+  int index;
-+
-+  memset (&tmptxdesc, 0, sizeof(tmptxdesc));
-+  tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG;
-+  tmptxdesc.u.r1.rate = 0x0a;
-+
-+  /*
-+   * Clear out all of the transmit descriptor except for the next pointer
-+   */
-+  copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr),
-+		    (u8 *) &(tmptxdesc.HostMemPtr),
-+		    sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc));
-+  
-+  /*
-+   * This is only called immediately after we've allocated, so we should
-+   * be able to set the head back to this descriptor.
-+   */
-+  index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size;
-+  printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index);
-+  adev->tx_head = index;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void*
-+acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque)
-+{
-+	return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_tx_data
-+**
-+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx).
-+** Can be called from acx_i_start_xmit (data frames from net core).
-+**
-+** FIXME: in case of fragments, should loop over the number of
-+** pre-allocated tx descrs, properly setting up transfer data and
-+** CTL_xxx flags according to fragment number.
-+*/
-+void
-+acxmem_update_queue_indicator (acx_device_t *adev, int txqueue)
-+{
-+#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE
-+  u32 indicator;
-+  unsigned long flags;
-+  int count;
-+
-+  /*
-+   * Can't handle an interrupt while we're fiddling with the ACX's lock,
-+   * according to TI.  The ACX is supposed to hold fw_lock for at most
-+   * 500ns.
-+   */
-+  local_irq_save (flags);
-+
-+  /*
-+   * Wait for ACX to release the lock (at most 500ns).
-+   */
-+  count = 0;
-+  while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock))
-+	 && (count++ < 50)) {
-+    ndelay (10);
-+  }
-+  if (count < 50) {
-+
-+    /*
-+     * Take out the host lock - anything non-zero will work, so don't worry about
-+     * be/le
-+     */
-+    write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1);
-+
-+    /*
-+     * Avoid a race condition
-+     */
-+    count = 0;
-+    while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock))
-+	   && (count++ < 50)) {
-+      ndelay (10);
-+    }
-+
-+    if (count < 50) {
-+      /*
-+       * Mark the queue active
-+       */
-+      indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator));
-+      indicator |= cpu_to_le32 (1 << txqueue);
-+      write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator);
-+    }
-+
-+    /*
-+     * Release the host lock
-+     */
-+    write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0);
-+
-+  }
-+
-+  /*
-+   * Restore interrupts
-+   */
-+  local_irq_restore (flags);
-+#endif
-+}
-+
-+void
-+acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len)
-+{
-+  /*
-+   * txdesc is the address on the ACX
-+   */
-+	txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+	txhostdesc_t *hostdesc1, *hostdesc2;
-+	client_t *clt;
-+	u16 rate_cur;
-+	u8 Ctl_8, Ctl2_8;
-+	u32 addr;
-+
-+	FN_ENTER;
-+	/* fw doesn't tx such packets anyhow */
-+	if (unlikely(len < WLAN_HDR_A3_LEN))
-+		goto end;
-+
-+	hostdesc1 = get_txhostdesc(adev, txdesc);
-+	/* modify flag status in separate variable to be able to write it back
-+	 * in one big swoop later (also in order to have less device memory
-+	 * accesses) */
-+	Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+	Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */
-+
-+	hostdesc2 = hostdesc1 + 1;
-+
-+	/* DON'T simply set Ctl field to 0 here globally,
-+	 * it needs to maintain a consistent flag status (those are state flags!!),
-+	 * otherwise it may lead to severe disruption. Only set or reset particular
-+	 * flags at the exact moment this is needed... */
-+
-+	/* let chip do RTS/CTS handshaking before sending
-+	 * in case packet size exceeds threshold */
-+	if (len > adev->rts_threshold)
-+		SET_BIT(Ctl2_8, DESC_CTL2_RTS);
-+	else
-+		CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_3_AP:
-+		clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1);
-+		break;
-+	case ACX_MODE_2_STA:
-+		clt = adev->ap_client;
-+		break;
-+#if 0
-+/* testing was done on acx111: */
-+	case ACX_MODE_MONITOR:
-+		SET_BIT(Ctl2_8, 0
-+/* sends CTS to self before packet */
-+			+ DESC_CTL2_SEQ		/* don't increase sequence field */
-+/* not working (looks like good fcs is still added) */
-+			+ DESC_CTL2_FCS		/* don't add the FCS */
-+/* not tested */
-+			+ DESC_CTL2_MORE_FRAG
-+/* not tested */
-+			+ DESC_CTL2_RETRY	/* don't increase retry field */
-+/* not tested */
-+			+ DESC_CTL2_POWER	/* don't increase power mgmt. field */
-+/* no effect */
-+			+ DESC_CTL2_WEP		/* encrypt this frame */
-+/* not tested */
-+			+ DESC_CTL2_DUR		/* don't increase duration field */
-+			);
-+		/* fallthrough */
-+#endif
-+	default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */
-+		clt = NULL;
-+		break;
-+	}
-+
-+	rate_cur = clt ? clt->rate_cur : adev->rate_bcast;
-+	if (unlikely(!rate_cur)) {
-+		printk("acx: driver bug! bad ratemask\n");
-+		goto end;
-+	}
-+
-+	/* used in tx cleanup routine for auto rate and accounting: */
-+	put_txcr(adev, txdesc, clt, rate_cur);
-+
-+	write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len));
-+	hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN);
-+	if (IS_ACX111(adev)) {
-+		/* note that if !txdesc->do_auto, txrate->cur
-+		** has only one nonzero bit */
-+		txdesc->u.r2.rate111 = cpu_to_le16(
-+			rate_cur
-+			/* WARNING: I was never able to make it work with prism54 AP.
-+			** It was falling down to 1Mbit where shortpre is not applicable,
-+			** and not working at all at "5,11 basic rates only" setting.
-+			** I even didn't see tx packets in radio packet capture.
-+			** Disabled for now --vda */
-+			/*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */
-+			);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+			/* should add this to rate111 above as necessary */
-+			| (clt->pbcc511 ? RATE111_PBCC511 : 0)
-+#endif
-+		hostdesc1->length = cpu_to_le16(len);
-+	} else { /* ACX100 */
-+		u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100;
-+		write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+		if (clt->pbcc511) {
-+			if (n == RATE100_5 || n == RATE100_11)
-+				n |= RATE100_PBCC511;
-+		}
-+
-+		if (clt->shortpre && (clt->cur != RATE111_1))
-+			SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */
-+#endif
-+		/* set autodma and reclaim and 1st mpdu */
-+		SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG);
-+
-+#if ACX_FRAGMENTATION
-+		/* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */
-+#endif
-+		hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN);
-+
-+		/*
-+		 * Since we're not using autodma copy the packet data to the acx now.
-+		 * Even host descriptors point to the packet header, and the odd indexed
-+		 * descriptor following points to the packet data.
-+		 *
-+		 * The first step is to find free memory in the ACX transmit buffers.
-+		 * They don't necessarily map one to one with the transmit queue entries,
-+		 * so search through them starting just after the last one used.
-+		 */
-+		addr = allocate_acx_txbuf_space (adev, len);
-+		if (addr) {
-+		  chaincopy_to_slavemem (adev, addr, hostdesc1->data, len);
-+		}
-+		else {
-+		  /*
-+		   * Bummer.  We thought we might have enough room in the transmit
-+		   * buffers to send this packet, but it turns out we don't.  alloc_tx
-+		   * has already marked this transmit descriptor as HOSTOWN and ACXDONE,
-+		   * which means the ACX will hang when it gets to this descriptor unless
-+		   * we do something about it.  Having a bubble in the transmit queue just
-+		   * doesn't seem to work, so we have to reset this transmit queue entry's
-+		   * state to its original value and back up our head pointer to point
-+		   * back to this entry.
-+		   */
-+		  hostdesc1->length = 0;
-+		  hostdesc2->length = 0;
-+		  write_slavemem16 (adev, (u32) &(txdesc->total_length), 0);
-+		  write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG);
-+		  adev->tx_head  = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size;
-+		  goto end;
-+		}
-+		/*
-+		 * Tell the ACX where the packet is.
-+		 */
-+		write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr);
-+
-+	}
-+	/* don't need to clean ack/rts statistics here, already
-+	 * done on descr cleanup */
-+
-+	/* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors
-+	 * are now owned by the acx100; do this as LAST operation */
-+	CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN);
-+	/* flush writes before we release hostdesc to the adapter here */
-+	//wmb();
-+
-+	/* write back modified flags */
-+	/*
-+	 * At this point Ctl_8 should just be FIRSTFRAG
-+	 */
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8);
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8);
-+	/* unused: txdesc->tx_time = cpu_to_le32(jiffies); */
-+
-+	/*
-+	 * Update the queue indicator to say there's data on the first queue.
-+	 */
-+	acxmem_update_queue_indicator (adev, 0);
-+
-+	/* flush writes before we tell the adapter that it's its turn now */
-+	mmiowb();
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+	write_flush(adev);
-+
-+	/* log the packet content AFTER sending it,
-+	 * in order to not delay sending any further than absolutely needed
-+	 * Do separate logs for acx100/111 to have human-readable rates */
-+	if (unlikely(acx_debug & (L_XFER|L_DATA))) {
-+		u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc;
-+		if (IS_ACX111(adev))
-+			printk("tx: pkt (%s): len %d "
-+				"rate %04X%s status %u\n",
-+				acx_get_packet_type_string(le16_to_cpu(fc)), len,
-+				le16_to_cpu(txdesc->u.r2.rate111),
-+				(le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "",
-+				adev->status);
-+		else
-+			printk("tx: pkt (%s): len %d rate %03u%s status %u\n",
-+				acx_get_packet_type_string(fc), len,
-+				read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)),
-+				(Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "",
-+				adev->status);
-+
-+		if (acx_debug & L_DATA) {
-+			printk("tx: 802.11 [%d]: ", len);
-+			acx_dump_bytes(hostdesc1->data, len);
-+		}
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_clean_txdesc
-+**
-+** This function resets the txdescs' status when the ACX100
-+** signals the TX done IRQ (txdescs have been processed), starting with
-+** the pool index of the descriptor which we would use next,
-+** in order to make sure that we can be as fast as possible
-+** in filling new txdescs.
-+** Everytime we get called we know where the next packet to be cleaned is.
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_txbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_txbuffer(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+	u8 Ctl_8;
-+
-+	/* no FN_ENTER here, we don't want that */
-+	/* no locks here, since it's entirely non-critical code */
-+	txdesc = adev->txdesc_start;
-+	if (unlikely(!txdesc)) return;
-+	printk("tx: desc->Ctl8's:");
-+	for (i = 0; i < TX_CNT; i++) {
-+	  Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+		printk(" %02X", Ctl_8);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+	printk("\n");
-+}
-+#endif
-+
-+
-+static void
-+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger)
-+{
-+	const char *err = "unknown error";
-+
-+	/* hmm, should we handle this as a mask
-+	 * of *several* bits?
-+	 * For now I think only caring about
-+	 * individual bits is ok... */
-+	switch (error) {
-+	case 0x01:
-+		err = "no Tx due to error in other fragment";
-+		adev->wstats.discard.fragment++;
-+		break;
-+	case 0x02:
-+		err = "Tx aborted";
-+		adev->stats.tx_aborted_errors++;
-+		break;
-+	case 0x04:
-+		err = "Tx desc wrong parameters";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x08:
-+		err = "WEP key not found";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x10:
-+		err = "MSDU lifetime timeout? - try changing "
-+				"'iwconfig retry lifetime XXX'";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x20:
-+		err = "excessive Tx retries due to either distance "
-+			"too high or unable to Tx or Tx frame error - "
-+			"try changing 'iwconfig txpower XXX' or "
-+			"'sens'itivity or 'retry'";
-+		adev->wstats.discard.retries++;
-+		/* Tx error 0x20 also seems to occur on
-+		 * overheating, so I'm not sure whether we
-+		 * actually want to do aggressive radio recalibration,
-+		 * since people maybe won't notice then that their hardware
-+		 * is slowly getting cooked...
-+		 * Or is it still a safe long distance from utter
-+		 * radio non-functionality despite many radio recalibs
-+		 * to final destructive overheating of the hardware?
-+		 * In this case we really should do recalib here...
-+		 * I guess the only way to find out is to do a
-+		 * potentially fatal self-experiment :-\
-+		 * Or maybe only recalib in case we're using Tx
-+		 * rate auto (on errors switching to lower speed
-+		 * --> less heat?) or 802.11 power save mode?
-+		 *
-+		 * ok, just do it. */
-+		if (++adev->retry_errors_msg_ratelimit % 4 == 0) {
-+			if (adev->retry_errors_msg_ratelimit <= 20) {
-+				printk("%s: several excessive Tx "
-+					"retry errors occurred, attempting "
-+					"to recalibrate radio. Radio "
-+					"drift might be caused by increasing "
-+					"card temperature, please check the card "
-+					"before it's too late!\n",
-+					adev->ndev->name);
-+				if (adev->retry_errors_msg_ratelimit == 20)
-+					printk("disabling above message\n");
-+			}
-+
-+			acx_schedule_task(adev,	ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+		}
-+		break;
-+	case 0x40:
-+		err = "Tx buffer overflow";
-+		adev->stats.tx_fifo_errors++;
-+		break;
-+	case 0x80:
-+		err = "DMA error";
-+		adev->wstats.discard.misc++;
-+		break;
-+	}
-+	adev->stats.tx_errors++;
-+	if (adev->stats.tx_errors <= 20)
-+		printk("%s: tx error 0x%02X, buf %02u! (%s)\n",
-+				adev->ndev->name, error, finger, err);
-+	else
-+		printk("%s: tx error 0x%02X, buf %02u!\n",
-+				adev->ndev->name, error, finger);
-+}
-+
-+
-+unsigned int
-+acxmem_l_clean_txdesc(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	unsigned finger;
-+	int num_cleaned;
-+	u16 r111;
-+	u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8;
-+	u32 acxmem;
-+	txdesc_t tmptxdesc;
-+
-+	FN_ENTER;
-+
-+	/*
-+	 * Set up a template descriptor for re-initialization.  The only
-+	 * things that get set are Ctl_8 and the rate, and the rate defaults
-+	 * to 1Mbps.
-+	 */
-+	memset (&tmptxdesc, 0, sizeof (tmptxdesc));
-+	tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG;
-+	tmptxdesc.u.r1.rate = 0x0a;
-+
-+	if (unlikely(acx_debug & L_DEBUG))
-+		log_txbuffer(adev);
-+
-+	log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail);
-+
-+	/* We know first descr which is not free yet. We advance it as far
-+	** as we see correct bits set in following descs (if next desc
-+	** is NOT free, we shouldn't advance at all). We know that in
-+	** front of tx_tail may be "holes" with isolated free descs.
-+	** We will catch up when all intermediate descs will be freed also */
-+
-+	finger = adev->tx_tail;
-+	num_cleaned = 0;
-+	while (likely(finger != adev->tx_head)) {
-+		txdesc = get_txdesc(adev, finger);
-+
-+		/* If we allocated txdesc on tx path but then decided
-+		** to NOT use it, then it will be left as a free "bubble"
-+		** in the "allocated for tx" part of the ring.
-+		** We may meet it on the next ring pass here. */
-+
-+		/* stop if not marked as "tx finished" and "host owned" */
-+		Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+		if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN)
-+					!= DESC_CTL_ACXDONE_HOSTOWN) {
-+			if (unlikely(!num_cleaned)) { /* maybe remove completely */
-+				log(L_BUFT, "clean_txdesc: tail isn't free. "
-+					"tail:%d head:%d\n",
-+					adev->tx_tail, adev->tx_head);
-+			}
-+			break;
-+		}
-+
-+		/* remember desc values... */
-+		error = read_slavemem8 (adev, (u32) &(txdesc->error));
-+		ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures));
-+		rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures));
-+		rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok));
-+		r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate));
-+		r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111)));
-+
-+		/* need to check for certain error conditions before we
-+		 * clean the descriptor: we still need valid descr data here */
-+		if (unlikely(0x30 & error)) {
-+			/* only send IWEVTXDROP in case of retry or lifetime exceeded;
-+			 * all other errors mean we screwed up locally */
-+			union iwreq_data wrqu;
-+			wlan_hdr_t *hdr;
-+			txhostdesc_t *hostdesc;
-+
-+			hostdesc = get_txhostdesc(adev, txdesc);
-+			hdr = (wlan_hdr_t *)hostdesc->data;
-+			MAC_COPY(wrqu.addr.sa_data, hdr->a1);
-+			wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL);
-+		}
-+
-+		/*
-+		 * Free up the transmit data buffers
-+		 */
-+		acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+		if (acxmem) {
-+		  reclaim_acx_txbuf_space (adev, acxmem);
-+		}
-+
-+		/* ...and free the desc by clearing all the fields 
-+		   except the next pointer */
-+		copy_to_slavemem (adev,
-+				  (u32) &(txdesc->HostMemPtr), 
-+				  (u8 *) &(tmptxdesc.HostMemPtr),
-+				  sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)
-+				  );
-+
-+		adev->tx_free++;
-+		num_cleaned++;
-+
-+		if ((adev->tx_free >= TX_START_QUEUE)
-+		 && (adev->status == ACX_STATUS_4_ASSOCIATED)
-+		 && (acx_queue_stopped(adev->ndev))
-+		) {
-+			log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n",
-+					adev->tx_free);
-+			acx_wake_queue(adev->ndev, NULL);
-+		}
-+
-+		/* do error checking, rate handling and logging
-+		 * AFTER having done the work, it's faster */
-+
-+		/* do rate handling */
-+		if (adev->rate_auto) {
-+			struct client *clt = get_txc(adev, txdesc);
-+			if (clt) {
-+				u16 cur = get_txr(adev, txdesc);
-+				if (clt->rate_cur == cur) {
-+					acx_l_handle_txrate_auto(adev, clt,
-+						cur, /* intended rate */
-+						r100, r111, /* actually used rate */
-+						(error & 0x30), /* was there an error? */
-+						TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free);
-+				}
-+			}
-+		}
-+
-+		if (unlikely(error))
-+			handle_tx_error(adev, error, finger);
-+
-+		if (IS_ACX111(adev))
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n",
-+				finger, ack_failures, rts_failures, rts_ok, r111);
-+		else
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n",
-+				finger, ack_failures, rts_failures, rts_ok, r100);
-+
-+		/* update pointer for descr to be cleaned next */
-+		finger = (finger + 1) % TX_CNT;
-+	}
-+
-+	/* remember last position */
-+	adev->tx_tail = finger;
-+/* end: */
-+	FN_EXIT1(num_cleaned);
-+	return num_cleaned;
-+}
-+
-+/* clean *all* Tx descriptors, and regardless of their previous state.
-+ * Used for brute-force reset handling. */
-+void
-+acxmem_l_clean_txdesc_emergency(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+	u32 acxmem;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < TX_CNT; i++) {
-+		txdesc = get_txdesc(adev, i);
-+
-+		/* free it */
-+		write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->error), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN);
-+
-+		/*
-+		 * Clean up the memory allocated on the ACX for this transmit descriptor.
-+		 */
-+		acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+		if (acxmem) {
-+		  reclaim_acx_txbuf_space (adev, acxmem);
-+		}		
-+		
-+		write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0);
-+	}
-+
-+	adev->tx_free = TX_CNT;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_create_tx_host_desc_queue
-+*/
-+
-+static void*
-+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg)
-+{
-+	void *ptr;
-+        ptr = kmalloc (size, GFP_KERNEL);
-+	/*
-+	 * The ACX can't use the physical address, so we'll have to fake it
-+	 * later and it might be handy to have the virtual address.
-+	 */
-+	*phy = (dma_addr_t) NULL;
-+
-+	if (ptr) {
-+		log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n",
-+				msg, (int)size, ptr, (unsigned long long)*phy);
-+		memset(ptr, 0, size);
-+		return ptr;
-+	}
-+	printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n",
-+					msg, (int)size);
-+	return NULL;
-+}
-+
-+
-+/*
-+ * In the generic slave memory access mode, most of the stuff in
-+ * the txhostdesc_t is unused.  It's only here because the rest of
-+ * the ACX driver expects it to be since the PCI version uses indirect
-+ * host memory organization with DMA.  Since we're not using DMA the
-+ * only use we have for the host descriptors is to store the packets
-+ * on the way out.
-+ */
-+static int
-+acxmem_s_create_tx_host_desc_queue(acx_device_t *adev)
-+{
-+	txhostdesc_t *hostdesc;
-+	u8 *txbuf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate TX buffer */
-+	adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS;
-+
-+	adev->txbuf_start = allocate(adev, adev->txbuf_area_size,
-+				     &adev->txbuf_startphy, "txbuf_start");
-+	if (!adev->txbuf_start)
-+	  goto fail;
-+
-+	/* allocate the TX host descriptor queue pool */
-+	adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc);
-+
-+	adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size,
-+					  &adev->txhostdesc_startphy, "txhostdesc_start");
-+	if (!adev->txhostdesc_start)
-+	  goto fail;
-+
-+	/* check for proper alignment of TX host descriptor pool */
-+	if ((long) adev->txhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	hostdesc = adev->txhostdesc_start;
-+	txbuf = adev->txbuf_start;
-+
-+#if 0
-+/* Each tx buffer is accessed by hardware via
-+** txdesc -> txhostdesc(s) -> txbuffer(s).
-+** We use only one txhostdesc per txdesc, but it looks like
-+** acx111 is buggy: it accesses second txhostdesc
-+** (via hostdesc.desc_phy_next field) even if
-+** txdesc->length == hostdesc->length and thus
-+** entire packet was placed into first txhostdesc.
-+** Due to this bug acx111 hangs unless second txhostdesc
-+** has le16_to_cpu(hostdesc.length) = 3 (or larger)
-+** Storing NULL into hostdesc.desc_phy_next
-+** doesn't seem to help.
-+**
-+** Update: although it worked on Xterasys XN-2522g
-+** with len=3 trick, WG311v2 is even more bogus, doesn't work.
-+** Keeping this code (#ifdef'ed out) for documentational purposes.
-+*/
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		hostdesc_phy += sizeof(*hostdesc);
-+		if (!(i & 1)) {
-+			hostdesc->data_phy = cpu2acx(txbuf_phy);
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN);
-+			/* hostdesc->length = ... */
-+			hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+			hostdesc->pNext = ptr2acx(NULL);
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			hostdesc->data = txbuf;
-+
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS;
-+			txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS;
-+		} else {
-+			/* hostdesc->data_phy = ... */
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			/* hostdesc->Ctl_16 = ... */
-+			hostdesc->length = cpu_to_le16(3); /* bug workaround */
-+			/* hostdesc->desc_phy_next = ... */
-+			/* hostdesc->pNext = ... */
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			/* hostdesc->data = ... */
-+		}
-+		hostdesc++;
-+	}
-+#endif
-+/* We initialize two hostdescs so that they point to adjacent
-+** memory areas. Thus txbuf is really just a contiguous memory area */
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		/* ->data is a non-hardware field: */
-+		hostdesc->data = txbuf;
-+
-+		if (!(i & 1)) {
-+			txbuf += WLAN_HDR_A3_LEN;
-+		} else {
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN;
-+		}
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_tx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_create_rx_host_desc_queue
-+*/
-+/* the whole size of a data buffer (header plus data body)
-+ * plus 32 bytes safety offset at the end */
-+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32)
-+
-+static int
-+acxmem_s_create_rx_host_desc_queue(acx_device_t *adev)
-+{
-+	rxhostdesc_t *hostdesc;
-+	rxbuffer_t *rxbuf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate the RX host descriptor queue pool */
-+	adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc);
-+
-+	adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size,
-+					  &adev->rxhostdesc_startphy, "rxhostdesc_start");
-+	if (!adev->rxhostdesc_start)
-+	  goto fail;
-+
-+	/* check for proper alignment of RX host descriptor pool */
-+	if ((long) adev->rxhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	/* allocate Rx buffer pool which will be used by the acx
-+	 * to store the whole content of the received frames in it */
-+	adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE;
-+
-+	adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size,
-+				     &adev->rxbuf_startphy, "rxbuf_start");
-+	if (!adev->rxbuf_start)
-+	  goto fail;
-+
-+	rxbuf = adev->rxbuf_start;
-+	hostdesc = adev->rxhostdesc_start;
-+
-+	/* don't make any popular C programming pointer arithmetic mistakes
-+	 * here, otherwise I'll kill you...
-+	 * (and don't dare asking me why I'm warning you about that...) */
-+	for (i = 0; i < RX_CNT; i++) {
-+		hostdesc->data = rxbuf;
-+		hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE);
-+		rxbuf++;
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_rx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_create_hostdesc_queues
-+*/
-+int
-+acxmem_s_create_hostdesc_queues(acx_device_t *adev)
-+{
-+	int result;
-+	result = acxmem_s_create_tx_host_desc_queue(adev);
-+	if (OK != result) return result;
-+	result = acxmem_s_create_rx_host_desc_queue(adev);
-+	return result;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_tx_desc_queue
-+*/
-+static void
-+acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start)
-+{
-+	txdesc_t *txdesc;
-+	u32 clr;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	if (IS_ACX100(adev))
-+		adev->txdesc_size = sizeof(*txdesc);
-+	else
-+		/* the acx111 txdesc is 4 bytes larger */
-+		adev->txdesc_size = sizeof(*txdesc) + 4;
-+
-+	/*
-+	 * This refers to an ACX address, not one of ours
-+	 */
-+	adev->txdesc_start = (txdesc_t *) tx_queue_start;
-+
-+	log(L_DEBUG, "adev->txdesc_start=%p\n",
-+			adev->txdesc_start);
-+
-+	adev->tx_free = TX_CNT;
-+	/* done by memset: adev->tx_head = 0; */
-+	/* done by memset: adev->tx_tail = 0; */
-+	txdesc = adev->txdesc_start;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111 has a preinitialized Tx buffer! */
-+		/* loop over whole send pool */
-+		/* FIXME: do we have to do the hostmemptr stuff here?? */
-+		for (i = 0; i < TX_CNT; i++) {
-+			txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+			/* reserve two (hdr desc and payload desc) */
-+			txdesc = advance_txdesc(adev, txdesc, 1);
-+		}
-+	} else {
-+		/* ACX100 Tx buffer needs to be initialized by us */
-+		/* clear whole send pool. sizeof is safe here (we are acx100) */
-+
-+		/*
-+		 * adev->txdesc_start refers to device memory, so we can't write
-+		 * directly to it.
-+		 */
-+		clr = (u32) adev->txdesc_start;
-+		while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) {
-+		  write_slavemem32 (adev, clr, 0);
-+		  clr += 4;
-+		}
-+
-+		/* loop over whole send pool */
-+		for (i = 0; i < TX_CNT; i++) {
-+			log(L_DEBUG, "configure card tx descriptor: 0x%p, "
-+				"size: 0x%X\n", txdesc, adev->txdesc_size);
-+
-+			/* initialise ctl */
-+			/*
-+			 * No auto DMA here
-+			 */
-+			write_slavemem8 (adev, (u32) &(txdesc->Ctl_8),
-+					(u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG));
-+			/* done by memset(0): txdesc->Ctl2_8 = 0; */
-+
-+			/* point to next txdesc */
-+			write_slavemem32 (adev, (u32) &(txdesc->pNextDesc),
-+					  (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size));
-+
-+			/* go to the next one */
-+			/* ++ is safe here (we are acx100) */
-+			txdesc++;
-+		}
-+		/* go back to the last one */
-+		txdesc--;
-+		/* and point to the first making it a ring buffer */
-+		write_slavemem32 (adev, (u32) &(txdesc->pNextDesc),
-+				  (u32) cpu_to_le32 (tx_queue_start));
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_rx_desc_queue
-+*/
-+static void
-+acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start)
-+{
-+	rxdesc_t *rxdesc;
-+	u32 mem_offs;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* done by memset: adev->rx_tail = 0; */
-+
-+	/* ACX111 doesn't need any further config: preconfigures itself.
-+	 * Simply print ring buffer for debugging */
-+	if (IS_ACX111(adev)) {
-+		/* rxdesc_start already set here */
-+
-+		adev->rxdesc_start = (rxdesc_t *) rx_queue_start;
-+
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc);
-+			rxdesc = adev->rxdesc_start = (rxdesc_t *)
-+			  acx2cpu(rxdesc->pNextDesc);
-+		}
-+	} else {
-+		/* we didn't pre-calculate rxdesc_start in case of ACX100 */
-+		/* rxdesc_start should be right AFTER Tx pool */
-+		adev->rxdesc_start = (rxdesc_t *)
-+			((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t)));
-+		/* NB: sizeof(txdesc_t) above is valid because we know
-+		** we are in if (acx100) block. Beware of cut-n-pasting elsewhere!
-+		** acx111's txdesc is larger! */
-+
-+		mem_offs = (u32) adev->rxdesc_start;
-+		while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) {
-+		  write_slavemem32 (adev, mem_offs, 0);
-+		  mem_offs += 4;
-+		}
-+
-+		/* loop over whole receive pool */
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc);
-+			/* point to next rxdesc */
-+			write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc),
-+					  (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc)));
-+			/* go to the next one */
-+			rxdesc++;
-+		}
-+		/* go to the last one */
-+		rxdesc--;
-+
-+		/* and point to the first making it a ring buffer */
-+		write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc),
-+				  (u32) cpu_to_le32 (rx_queue_start));
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_desc_queues
-+*/
-+void
-+acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start)
-+{
-+  u32 *p;
-+  int i;
-+
-+	acxmem_create_tx_desc_queue(adev, tx_queue_start);
-+	acxmem_create_rx_desc_queue(adev, rx_queue_start);
-+	p = (u32 *) adev->acx_queue_indicator;
-+	for (i = 0; i < 4; i++) {
-+	  write_slavemem32 (adev, (u32) p, 0);
-+	  p++;
-+	}
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_proc_diag_output
-+*/
-+char*
-+acxmem_s_proc_diag_output(char *p, acx_device_t *adev)
-+{
-+	const char *rtl, *thd, *ttl;
-+	txdesc_t *txdesc;
-+	u8 Ctl_8;
-+	rxdesc_t *rxdesc;
-+	int i;
-+	u32 tmp;
-+	txdesc_t txd;
-+	u8 buf[0x200];
-+	int j, k;
-+
-+	FN_ENTER;
-+
-+#if DUMP_MEM_DURING_DIAG > 0
-+	dump_acxmem (adev, 0, 0x10000);
-+	panic ("dump finished");
-+#endif
-+	
-+	p += sprintf(p, "** Rx buf **\n");
-+	rxdesc = adev->rxdesc_start;
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		rtl = (i == adev->rx_tail) ? " [tail]" : "";
-+		Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+		if (Ctl_8 & DESC_CTL_HOSTOWN)
-+			p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl);
-+		else
-+			p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl);
-+		rxdesc++;
-+	}
-+	p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free,
-+				acx_queue_stopped(adev->ndev) ? "STOPPED" : "running");
-+	
-+	p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n",
-+		     adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free);
-+	txdesc = adev->txdesc_start;
-+	if (txdesc) {
-+	  for (i = 0; i < TX_CNT; i++) {
-+	    thd = (i == adev->tx_head) ? " [head]" : "";
-+	    ttl = (i == adev->tx_tail) ? " [tail]" : "";
-+	    copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd));
-+	    Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+	    if (Ctl_8 & DESC_CTL_ACXDONE)
-+	      p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    else if (Ctl_8 & DESC_CTL_HOSTOWN)
-+	      p += sprintf(p, "%02u available     (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    else
-+	      p += sprintf(p, "%02u busy          (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+	    if (tmp) {
-+	      p += sprintf (p, " %04x", tmp);
-+	      while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) {
-+		tmp <<= 5;
-+		p += sprintf (p, " %04x", tmp);
-+	      }
-+	    }
-+	    p += sprintf (p, "\n");
-+	    p += sprintf (p, "  %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n"
-+			     "%02x %02x %02x %02x %04x\n",
-+			  (u32) txdesc,
-+			  txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time,
-+			  txd.total_length, txd.Reserved,
-+			  txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3],
-+			  txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures,
-+			  txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl,
-+			  txd.queue_info
-+			  );
-+	    if (txd.AcxMemPtr.v) {
-+	      copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf));
-+	      for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) {
-+		p += sprintf (p, "    ");
-+		for (k = 0; (k < 16) && (j+k < txd.total_length); k++) {
-+		  p += sprintf (p, " %02x", buf[j+k+4]);
-+		}
-+		p += sprintf (p, "\n");
-+	      }
-+	    }
-+	    txdesc = advance_txdesc(adev, txdesc, 1);
-+	  }
-+	}
-+	
-+	p += sprintf(p,
-+		"\n"
-+		"** Generic slave data **\n"
-+                "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n"
-+		"txbuf_start 0x%p, txbuf_area_size %u\n"
-+		"txdesc_size %u, txdesc_start 0x%p\n"
-+		"txhostdesc_start 0x%p, txhostdesc_area_size %u\n"
-+		"txbuf start 0x%04x, txbuf size %d\n"
-+		"rxdesc_start 0x%p\n"
-+		"rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n"
-+		"rxbuf_start 0x%p, rxbuf_area_size %u\n",
-+		adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES),
-+		adev->txbuf_start, adev->txbuf_area_size,
-+		adev->txdesc_size, adev->txdesc_start,
-+		adev->txhostdesc_start, adev->txhostdesc_area_size,
-+                adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize,
-+		adev->rxdesc_start,
-+		adev->rxhostdesc_start, adev->rxhostdesc_area_size,
-+		adev->rxbuf_start, adev->rxbuf_area_size);
-+	FN_EXIT0;
-+	return p;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxmem_proc_eeprom_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < 0x400; i++) {
-+		acxmem_read_eeprom_byte(adev, i, p++);
-+	}
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acxmem_set_interrupt_mask(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev)) {
-+		adev->irq_mask = (u16) ~(0
-+				| HOST_INT_RX_DATA       
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				/* | HOST_INT_RX_COMPLETE    */
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				| HOST_INT_IV_ICV_FAILURE
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				| HOST_INT_OVERFLOW    
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				| HOST_INT_FCS_THRESHOLD
-+				| HOST_INT_UNKNOWN
-+				);
-+		/* Or else acx100 won't signal cmd completion, right? */
-+		adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */
-+	} else {
-+		adev->irq_mask = (u16) ~(0
-+				| HOST_INT_RX_DATA 
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				/* | HOST_INT_RX_COMPLETE    */
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				/* | HOST_INT_IV_ICV_FAILURE */
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				/* | HOST_INT_OVERFLOW       */
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				/* | HOST_INT_FCS_THRESHOLD  */
-+				/* | HOST_INT_BEACON_MISSED        */
-+				);
-+		adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	struct acx111_ie_tx_level tx_level;
-+
-+	/* since it can be assumed that at least the Maxim radio has a
-+	 * maximum power output of 20dBm and since it also can be
-+	 * assumed that these values drive the DAC responsible for
-+	 * setting the linear Tx level, I'd guess that these values
-+	 * should be the corresponding linear values for a dBm value,
-+	 * in other words: calculate the values from that formula:
-+	 * Y [dBm] = 10 * log (X [mW])
-+	 * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm)
-+	 * and you're done...
-+	 * Hopefully that's ok, but you never know if we're actually
-+	 * right... (especially since Windows XP doesn't seem to show
-+	 * actual Tx dBm values :-P) */
-+
-+	/* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the
-+	 * values are EXACTLY mW!!! Not sure about RFMD and others,
-+	 * though... */
-+	static const u8 dbm2val_maxim[21] = {
-+		63, 63, 63, 62,
-+		61, 61, 60, 60,
-+		59, 58, 57, 55,
-+		53, 50, 47, 43,
-+		38, 31, 23, 13,
-+		0
-+	};
-+	static const u8 dbm2val_rfmd[21] = {
-+		 0,  0,  0,  1,
-+		 2,  2,  3,  3,
-+		 4,  5,  6,  8,
-+		10, 13, 16, 20,
-+		25, 32, 41, 50,
-+		63
-+	};
-+	const u8 *table;
-+
-+	switch (adev->radio_type) {
-+	case RADIO_MAXIM_0D:
-+		table = &dbm2val_maxim[0];
-+		break;
-+	case RADIO_RFMD_11:
-+	case RADIO_RALINK_15:
-+		table = &dbm2val_rfmd[0];
-+		break;
-+	default:
-+		printk("%s: unknown/unsupported radio type, "
-+			"cannot modify tx power level yet!\n",
-+				adev->ndev->name);
-+		return NOT_OK;
-+	}
-+	/*
-+	 * The hx4700 EEPROM, at least, only supports 1 power setting.  The configure
-+	 * routine matches the PA bias with the gain, so just use its default value.
-+	 * The values are: 0x2b for the gain and 0x03 for the PA bias.  The firmware
-+	 * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim
-+	 * radio's PA bias register.  The firmware limits itself to 0 - 64 when writing to the
-+	 * gain control DAC.
-+	 *
-+	 * Physically between the ACX and the radio, higher Tx gain control DAC values result
-+	 * in less power output; 0 volts to the Maxim radio results in the highest output power
-+	 * level, which I'm assuming matches up with 0 in the Tx Gain DAC register.
-+	 *
-+	 * Although there is only the 1 power setting, one of the radio firmware functions adjusts
-+	 * the transmit power level up and down.  That function is called by the ACX FIQ handler
-+	 * under certain conditions.
-+	 */
-+	tx_level.level = 1;
-+	//return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL);
-+
-+	printk("%s: changing radio power level to %u dBm (%u)\n",
-+			adev->ndev->name, level_dbm, table[level_dbm]);
-+	acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]);
-+
-+	return 0;
-+}
-+
-+void acxmem_e_release(struct device *dev) {
-+}
-+
-+/***********************************************************************
-+** acx_cs part
-+**
-+** called by pcmcia card service
-+*/
-+
-+/*
-+   The event() function is this driver's Card Services event handler.
-+   It will be called by Card Services when an appropriate card status
-+   event is received.  The config() and release() entry points are
-+   used to configure or release a socket, in response to card
-+   insertion and ejection events.  They are invoked from the acx_cs
-+   event handler. 
-+*/
-+
-+static int acx_cs_config(struct pcmcia_device *link);
-+static void acx_cs_release(struct pcmcia_device *link);
-+
-+/*
-+   The attach() and detach() entry points are used to create and destroy
-+   "instances" of the driver, where each instance represents everything
-+   needed to manage one actual PCMCIA card.
-+*/
-+
-+static void acx_cs_detach(struct pcmcia_device *p_dev);
-+
-+/*
-+   You'll also need to prototype all the functions that will actually
-+   be used to talk to your device.  See 'pcmem_cs' for a good example
-+   of a fully self-sufficient driver; the other drivers rely more or
-+   less on other parts of the kernel.
-+*/
-+
-+/*
-+   A linked list of "instances" of the  acxnet device.  Each actual
-+   PCMCIA card corresponds to one device instance, and is described
-+   by one struct pcmcia_device structure (defined in ds.h).
-+
-+   You may not want to use a linked list for this -- for example, the
-+   memory card driver uses an array of struct pcmcia_device pointers, where minor
-+   device numbers are used to derive the corresponding array index.
-+*/
-+
-+/*
-+   A driver needs to provide a dev_node_t structure for each device
-+   on a card.  In some cases, there is only one device per card (for
-+   example, ethernet cards, modems).  In other cases, there may be
-+   many actual or logical devices (SCSI adapters, memory cards with
-+   multiple partitions).  The dev_node_t structures need to be kept
-+   in a linked list starting at the 'dev' field of a struct pcmcia_device
-+   structure.  We allocate them in the card's private data structure,
-+   because they generally shouldn't be allocated dynamically.
-+
-+   In this case, we also provide a flag to indicate if a device is
-+   "stopped" due to a power management event, or card ejection.  The
-+   device IO routines can use a flag like this to throttle IO to a
-+   card that is not ready to accept it.
-+*/
-+   
-+
-+/*======================================================================
-+  
-+  acx_attach() creates an "instance" of the driver, allocating
-+  local data structures for one device.  The device is registered
-+  with Card Services.
-+  
-+  The dev_link structure is initialized, but we don't actually
-+  configure the card at this point -- we wait until we receive a
-+  card insertion event.
-+  
-+  ======================================================================*/
-+
-+static int acx_cs_probe(struct pcmcia_device *link)
-+{
-+	local_info_t *local;
-+	struct net_device *ndev;
-+
-+	DEBUG(0, "acx_attach()\n");
-+
-+        ndev = alloc_netdev(sizeof(acx_device_t), "wlan%d", dummy_netdev_init);
-+        if (!ndev) {
-+                printk("acx: no memory for netdevice struct\n");
-+                return -ENOMEM;
-+        }
-+
-+        /* Interrupt setup */
-+        link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-+        link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-+        link->irq.Handler = acxmem_i_interrupt;
-+        link->irq.Instance = ndev;
-+
-+	/*
-+	  General socket configuration defaults can go here.  In this
-+	  client, we assume very little, and rely on the CIS for almost
-+	  everything.  In most clients, many details (i.e., number, sizes,
-+	  and attributes of IO windows) are fixed by the nature of the
-+	  device, and can be hard-wired here.
-+	*/
-+	link->conf.Attributes = CONF_ENABLE_IRQ;
-+	link->conf.IntType = INT_MEMORY_AND_IO;
-+	link->conf.Present = PRESENT_OPTION | PRESENT_COPY;
-+	
-+	/* Allocate space for private device-specific data */
-+	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
-+	if (!local) {
-+		printk(KERN_ERR "acx_cs: no memory for new device\n");
-+		return -ENOMEM;
-+	}
-+	local->ndev = ndev;
-+	
-+	link->priv = local;
-+
-+	return acx_cs_config(link);
-+} /* acx_attach */
-+
-+/*======================================================================
-+  
-+  This deletes a driver "instance".  The device is de-registered
-+  with Card Services.  If it has been released, all local data
-+  structures are freed.  Otherwise, the structures will be freed
-+  when the device is released.
-+  
-+  ======================================================================*/
-+
-+static void acx_cs_detach(struct pcmcia_device *link)
-+{
-+	DEBUG(0, "acx_detach(0x%p)\n", link);
-+
-+
-+	if ( ((local_info_t*)link->priv)->ndev ) {
-+		acxmem_e_close( ((local_info_t*)link->priv)->ndev );
-+	}
-+
-+	acx_cs_release(link);
-+
-+	((local_info_t*)link->priv)->ndev = NULL;
-+
-+	kfree(link->priv);
-+} /* acx_detach */
-+
-+/*======================================================================
-+  
-+  acx_config() is scheduled to run after a CARD_INSERTION event
-+  is received, to configure the PCMCIA socket, and to make the
-+  device available to the system.
-+  
-+  ======================================================================*/
-+
-+#define CS_CHECK(fn, ret) \
-+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-+
-+static int acx_cs_config(struct pcmcia_device *link)
-+{
-+	tuple_t tuple;
-+	cisparse_t parse;
-+	local_info_t *local = link->priv;
-+	int last_fn, last_ret;
-+	u_char buf[64];
-+	win_req_t req;
-+	memreq_t map;
-+//	int i;
-+//        acx_device_t *adev;
-+
-+//	adev = (acx_device_t *)link->priv;
-+
-+	DEBUG(0, "acx_cs_config(0x%p)\n", link);
-+
-+	/*
-+	  In this loop, we scan the CIS for configuration table entries,
-+	  each of which describes a valid card configuration, including
-+	  voltage, IO window, memory window, and interrupt settings.
-+	  
-+	  We make no assumptions about the card to be configured: we use
-+	  just the information available in the CIS.  In an ideal world,
-+	  this would work for any PCMCIA card, but it requires a complete
-+	  and accurate CIS.  In practice, a driver usually "knows" most of
-+	  these things without consulting the CIS, and most client drivers
-+	  will only use the CIS to fill in implementation-defined details.
-+	*/
-+    tuple.Attributes = 0;
-+    tuple.TupleData = (cisdata_t *)buf;
-+    tuple.TupleDataMax = sizeof(buf);
-+    tuple.TupleOffset = 0;
-+    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-+
-+    /* don't trust the CIS on this; Linksys got it wrong */
-+    //link->conf.Present = 0x63;
-+
-+    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-+        while (1) {
-+                cistpl_cftable_entry_t dflt = { 0 };
-+                cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-+                if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-+                                pcmcia_parse_tuple(link, &tuple, &parse) != 0)
-+                        goto next_entry;
-+
-+                if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
-+                if (cfg->index == 0) goto next_entry;
-+                link->conf.ConfigIndex = cfg->index;
-+
-+                /* Does this card need audio output? */
-+                if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-+                        link->conf.Attributes |= CONF_ENABLE_SPKR;
-+                        link->conf.Status = CCSR_AUDIO_ENA;
-+                }
-+
-+                /* Use power settings for Vcc and Vpp if present */
-+                /*  Note that the CIS values need to be rescaled */
-+                if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-+                        link->conf.Vpp =
-+                                cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-+                else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-+                        link->conf.Vpp =
-+                                dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-+
-+                /* Do we need to allocate an interrupt? */
-+                if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-+                        link->conf.Attributes |= CONF_ENABLE_IRQ;
-+                if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
-+                        cistpl_mem_t *mem =
-+                                (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
-+//                        req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_AM|WIN_ENABLE|WIN_USE_WAIT;
-+                      req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE|WIN_USE_WAIT;
-+                        req.Base = mem->win[0].host_addr;
-+                        req.Size = mem->win[0].len;
-+                        req.Size=0x1000;
-+                        req.AccessSpeed = 0;
-+                        if (pcmcia_request_window(&link, &req, &link->win) != 0)
-+                                goto next_entry;
-+                        map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-+                        if (pcmcia_map_mem_page(link->win, &map) != 0)
-+                                goto next_entry;
-+                        else
-+                           printk(KERN_INFO "MEMORY WINDOW FOUND!!!\n");
-+                }
-+                /* If we got this far, we're cool! */
-+                break;
-+
-+        next_entry:
-+                CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-+        }
-+
-+       if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-+                printk(KERN_INFO "requesting Irq...\n");
-+                CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-+       }
-+
-+        /*
-+          This actually configures the PCMCIA socket -- setting up
-+          the I/O windows and the interrupt mapping, and putting the
-+          card and host interface into "Memory and IO" mode.
-+        */
-+        CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
-+	DEBUG(0,"RequestConfiguration OK\n");
-+
-+
-+          memwin.Base=req.Base;
-+          memwin.Size=req.Size;
-+
-+	acx_init_netdev(local->ndev, &link->dev, memwin.Base, memwin.Size, link->irq.AssignedIRQ);
-+
-+#if 1	
-+	/*
-+	  At this point, the dev_node_t structure(s) need to be
-+	  initialized and arranged in a linked list at link->dev_node.
-+	*/
-+	strcpy(local->node.dev_name, local->ndev->name );
-+	local->node.major = local->node.minor = 0;
-+	link->dev_node = &local->node;
-+	
-+	/* Finally, report what we've done */
-+	printk(KERN_INFO "%s: index 0x%02x: ",
-+	       local->ndev->name, link->conf.ConfigIndex);
-+#endif
-+	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-+		printk("irq %d", link->irq.AssignedIRQ);
-+	if (link->io.NumPorts1)
-+		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-+		       link->io.BasePort1+link->io.NumPorts1-1);
-+	if (link->io.NumPorts2)
-+		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-+		       link->io.BasePort2+link->io.NumPorts2-1);
-+	if (link->win)
-+		printk(", mem 0x%06lx-0x%06lx\n", req.Base,
-+		       req.Base+req.Size-1);
-+	return 0;
-+
-+ cs_failed:
-+	cs_error(link, last_fn, last_ret);
-+	acx_cs_release(link);
-+	return -ENODEV;
-+} /* acx_config */
-+
-+/*======================================================================
-+  
-+  After a card is removed, acx_release() will unregister the
-+  device, and release the PCMCIA configuration.  If the device is
-+  still open, this will be postponed until it is closed.
-+  
-+  ======================================================================*/
-+
-+static void acx_cs_release(struct pcmcia_device *link)
-+{
-+	DEBUG(0, "acx_release(0x%p)\n", link);
-+	acxmem_e_remove(link);
-+	pcmcia_disable_device(link);
-+}
-+
-+static int acx_cs_suspend(struct pcmcia_device *link)
-+{
-+	local_info_t *local = link->priv;
-+
-+	pm_message_t state;
-+	acxmem_e_suspend ( local->ndev, state);
-+	/* Already done in suspend
-+	 * netif_device_detach(local->ndev); */
-+
-+	return 0;
-+}
-+
-+static int acx_cs_resume(struct pcmcia_device *link)
-+{
-+	local_info_t *local = link->priv;
-+	
-+	FN_ENTER;
-+	resume_ndev = local->ndev;
-+
-+	schedule_work( &fw_resume_work );
-+	
-+	/* Already done in suspend
-+	if (link->open) {
-+	  // do we need reset for ACX, if so what function nane is ?
-+		//reset_acx_card(local->eth_dev);
-+		netif_device_attach(local->ndev);
-+	} */
-+	
-+	FN_EXIT0;
-+	return 0;
-+}
-+
-+static struct pcmcia_device_id acx_ids[] = {
-+	PCMCIA_DEVICE_MANF_CARD(0x0097, 0x8402),
-+        PCMCIA_DEVICE_MANF_CARD(0x0250, 0xb001),
-+	PCMCIA_DEVICE_NULL,
-+};
-+MODULE_DEVICE_TABLE(pcmcia, acx_ids);
-+
-+static struct pcmcia_driver acx_driver = {
-+	.owner		= THIS_MODULE,
-+	.drv		= {
-+		.name	= "acx_cs",
-+	},
-+	.probe		= acx_cs_probe,
-+	.remove		= acx_cs_detach,
-+	.id_table = acx_ids,
-+	.suspend	= acx_cs_suspend,
-+	.resume		= acx_cs_resume,
-+};
-+
-+int acx_cs_init(void)
-+{
-+        /* return success if at least one succeeded */
-+	DEBUG(0, "acxcs_init()\n");
-+	return pcmcia_register_driver(&acx_driver);
-+}
-+
-+void acx_cs_cleanup(void)
-+{
-+	pcmcia_unregister_driver(&acx_driver);
-+}
-+
-+/*
-+    This program is free software; you can redistribute it and/or
-+    modify it under the terms of the GNU General Public License
-+    as published by the Free Software Foundation; either version 2
-+    of the License, or (at your option) any later version.
-+
-+    This program is distributed in the hope that it will be useful,
-+    but WITHOUT ANY WARRANTY; without even the implied warranty of
-+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+    GNU General Public License for more details.
-+
-+    In addition:
-+
-+    Redistribution and use in source and binary forms, with or without
-+    modification, are permitted provided that the following conditions
-+    are met:
-+
-+    1. Redistributions of source code must retain the above copyright
-+       notice, this list of conditions and the following disclaimer.
-+    2. Redistributions in binary form must reproduce the above copyright
-+       notice, this list of conditions and the following disclaimer in the
-+       documentation and/or other materials provided with the distribution.
-+    3. The name of the author may not be used to endorse or promote
-+       products derived from this software without specific prior written
-+       permission.
-+
-+    THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-+    IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+    ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-+    INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+    SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-+    STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-+    IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+    POSSIBILITY OF SUCH DAMAGE.    
-+*/
-+
-+MODULE_DESCRIPTION( "ACX Cardbus Driver" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/htcsable_acx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/htcsable_acx.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,118 @@
-+/*
-+ * WLAN (TI TNETW1100B) support in the HTC Sable
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * 28-March-2006          Todd Blumer <todd@sdgsystems.com>
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <linux/mfd/asic3_base.h>
-+#include <asm/arch/htcsable-gpio.h>
-+#include <asm/arch/htcsable-asic.h>
-+#include <asm/io.h>
-+
-+#include "acx_hw.h"
-+
-+#define WLAN_BASE	PXA_CS2_PHYS
-+
-+/*
-+off: b15 c8 d3
-+on: d3 c8 b5 b5-
-+*/
-+
-+#define GPIO_NR_HTCSABLE_ACX111 111
-+
-+static int
-+htcsable_wlan_stop( void );
-+
-+static int
-+htcsable_wlan_start( void )
-+{
-+	printk( "htcsable_wlan_start\n" );
-+
-+  /*asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_RESET, 0);*/
-+  asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_PWR_3, 1<<GPIOC_ACX_PWR_3); /* related to acx */
-+  SET_HTCSABLE_GPIO(ACX111, 1);
-+	asic3_set_gpio_out_b(&htcsable_asic3.dev, 1<<GPIOB_ACX_PWR_1, 1<<GPIOB_ACX_PWR_1);
-+	asic3_set_gpio_out_d(&htcsable_asic3.dev, 1<<GPIOD_ACX_PWR_2, 1<<GPIOD_ACX_PWR_2);
-+  mdelay(260);
-+  asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_RESET, 1<<GPIOC_ACX_RESET);
-+
-+	return 0;
-+}
-+
-+static int
-+htcsable_wlan_stop( void )
-+{
-+	printk( "htcsable_wlan_stop\n" );
-+	asic3_set_gpio_out_b(&htcsable_asic3.dev, 1<<GPIOB_ACX_PWR_1, 0);
-+	asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_RESET, 0);
-+	asic3_set_gpio_out_d(&htcsable_asic3.dev, 1<<GPIOD_ACX_PWR_2, 0);
-+  SET_HTCSABLE_GPIO(ACX111, 0); /* not necessary to power down this one? */
-+	asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<<GPIOC_ACX_PWR_3, 0); /* not necessary to power down this one? */
-+
-+	return 0;
-+}
-+
-+static struct resource acx_resources[] = {
-+	[0] = {
-+		.start	= WLAN_BASE,
-+		.end	= WLAN_BASE + 0x20,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+//		.start	= asic3_irq_base(&htcsable_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N,
-+//		.end	= asic3_irq_base(&htcsable_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct acx_hardware_data acx_data = {
-+	.start_hw	= htcsable_wlan_start,
-+	.stop_hw	= htcsable_wlan_stop,
-+};
-+
-+static struct platform_device acx_device = {
-+	.name	= "acx-mem",
-+	.dev	= {
-+		.platform_data = &acx_data,
-+	},
-+	.num_resources	= ARRAY_SIZE( acx_resources ),
-+	.resource	= acx_resources,
-+};
-+
-+static int __init
-+htcsable_wlan_init( void )
-+{
-+	printk( "htcsable_wlan_init: acx-mem platform_device_register\n" );
-+	acx_device.resource[1].start = asic3_irq_base(&htcsable_asic3.dev) + ASIC3_GPIOB_IRQ_BASE+GPIOB_ACX_IRQ_N;
-+	acx_device.resource[1].end = asic3_irq_base(&htcsable_asic3.dev) + ASIC3_GPIOB_IRQ_BASE+GPIOB_ACX_IRQ_N;
-+	return platform_device_register( &acx_device );
-+}
-+
-+
-+static void __exit
-+htcsable_wlan_exit( void )
-+{
-+	platform_device_unregister( &acx_device );
-+}
-+
-+module_init( htcsable_wlan_init );
-+module_exit( htcsable_wlan_exit );
-+
-+MODULE_AUTHOR( "Todd Blumer <todd@sdgsystems.com>" );
-+MODULE_DESCRIPTION( "WLAN driver for HTC Sable" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/htcuniversal_acx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/htcuniversal_acx.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,108 @@
-+/*
-+ * WLAN (TI TNETW1100B) support in the HTC Universal
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * 28-March-2006          Todd Blumer <todd@sdgsystems.com>
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+#include <asm/io.h>
-+
-+#include "acx_hw.h"
-+
-+#define WLAN_BASE	PXA_CS2_PHYS
-+
-+
-+static int
-+htcuniversal_wlan_start( void )
-+{
-+	htcuniversal_egpio_enable(1<<EGPIO6_WIFI_ON);
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_PWR1_ON, 1<<GPIOC_WIFI_PWR1_ON);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_WIFI_PWR3_ON, 1<<GPIOD_WIFI_PWR3_ON);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_WIFI_PWR2_ON, 1<<GPIOD_WIFI_PWR2_ON);
-+	mdelay(100);
-+
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_RESET, 0);
-+	mdelay(100);
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_RESET, 1<<GPIOC_WIFI_RESET);
-+	mdelay(100);
-+	return 0;
-+}
-+
-+static int
-+htcuniversal_wlan_stop( void )
-+{
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_RESET, 0);
-+
-+	htcuniversal_egpio_disable(1<<EGPIO6_WIFI_ON);
-+	asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_WIFI_PWR1_ON, 0);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_WIFI_PWR2_ON, 0);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_WIFI_PWR3_ON, 0);
-+	return 0;
-+}
-+
-+static struct resource acx_resources[] = {
-+	[0] = {
-+		.start	= WLAN_BASE,
-+		.end	= WLAN_BASE + 0x20,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+//		.start	= asic3_irq_base(&htcuniversal_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N,
-+//		.end	= asic3_irq_base(&htcuniversal_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct acx_hardware_data acx_data = {
-+	.start_hw	= htcuniversal_wlan_start,
-+	.stop_hw	= htcuniversal_wlan_stop,
-+};
-+
-+static struct platform_device acx_device = {
-+	.name	= "acx-mem",
-+	.dev	= {
-+		.platform_data = &acx_data,
-+	},
-+	.num_resources	= ARRAY_SIZE( acx_resources ),
-+	.resource	= acx_resources,
-+};
-+
-+static int __init
-+htcuniversal_wlan_init( void )
-+{
-+	printk( "htcuniversal_wlan_init: acx-mem platform_device_register\n" );
-+	acx_device.resource[1].start = asic3_irq_base(&htcuniversal_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N;
-+	acx_device.resource[1].end = asic3_irq_base(&htcuniversal_asic3.dev) + ASIC3_GPIOC_IRQ_BASE+GPIOC_WIFI_IRQ_N;
-+	return platform_device_register( &acx_device );
-+}
-+
-+
-+static void __exit
-+htcuniversal_wlan_exit( void )
-+{
-+	platform_device_unregister( &acx_device );
-+}
-+
-+module_init( htcuniversal_wlan_init );
-+module_exit( htcuniversal_wlan_exit );
-+
-+MODULE_AUTHOR( "Todd Blumer <todd@sdgsystems.com>" );
-+MODULE_DESCRIPTION( "WLAN driver for HTC Universal" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/hx4700_acx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/hx4700_acx.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,108 @@
-+/*
-+ * WLAN (TI TNETW1100B) support in the hx470x.
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * 28-March-2006          Todd Blumer <todd@sdgsystems.com>
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/leds.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/hx4700-gpio.h>
-+#include <asm/arch/hx4700-core.h>
-+#include <asm/io.h>
-+
-+#include "acx_hw.h"
-+
-+#define WLAN_OFFSET	0x1000000
-+#define WLAN_BASE	(PXA_CS5_PHYS+WLAN_OFFSET)
-+
-+
-+static int
-+hx4700_wlan_start( void )
-+{
-+	SET_HX4700_GPIO( WLAN_RESET_N, 0 );
-+	mdelay(5);
-+	hx4700_egpio_enable( EGPIO0_VCC_3V3_EN );
-+	mdelay(100);
-+	hx4700_egpio_enable( EGPIO7_VCC_3V3_WL_EN );
-+	mdelay(150);
-+	hx4700_egpio_enable( EGPIO1_WL_VREG_EN | EGPIO2_VCC_2V1_WL_EN |
-+                             EGPIO6_WL1V8_EN );
-+	mdelay(10);
-+	SET_HX4700_GPIO( WLAN_RESET_N, 1 );
-+	mdelay(50);
-+	led_trigger_event_shared(hx4700_radio_trig, LED_FULL);
-+	return 0;
-+}
-+
-+static int
-+hx4700_wlan_stop( void )
-+{
-+	hx4700_egpio_disable( EGPIO0_VCC_3V3_EN | EGPIO1_WL_VREG_EN |
-+                              EGPIO7_VCC_3V3_WL_EN | EGPIO2_VCC_2V1_WL_EN |
-+                              EGPIO6_WL1V8_EN );
-+	SET_HX4700_GPIO( WLAN_RESET_N, 0 );
-+	led_trigger_event_shared(hx4700_radio_trig, LED_OFF);
-+	return 0;
-+}
-+
-+static struct resource acx_resources[] = {
-+	[0] = {
-+		.start	= WLAN_BASE,
-+		.end	= WLAN_BASE + 0x20,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= HX4700_IRQ(WLAN_IRQ_N),
-+		.end	= HX4700_IRQ(WLAN_IRQ_N),
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct acx_hardware_data acx_data = {
-+	.start_hw	= hx4700_wlan_start,
-+	.stop_hw	= hx4700_wlan_stop,
-+};
-+
-+static struct platform_device acx_device = {
-+	.name	= "acx-mem",
-+	.dev	= {
-+		.platform_data = &acx_data,
-+	},
-+	.num_resources	= ARRAY_SIZE( acx_resources ),
-+	.resource	= acx_resources,
-+};
-+
-+static int __init
-+hx4700_wlan_init( void )
-+{
-+	printk( "hx4700_wlan_init: acx-mem platform_device_register\n" );
-+	return platform_device_register( &acx_device );
-+}
-+
-+
-+static void __exit
-+hx4700_wlan_exit( void )
-+{
-+	platform_device_unregister( &acx_device );
-+}
-+
-+module_init( hx4700_wlan_init );
-+module_exit( hx4700_wlan_exit );
-+
-+MODULE_AUTHOR( "Todd Blumer <todd@sdgsystems.com>" );
-+MODULE_DESCRIPTION( "WLAN driver for iPAQ hx4700" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/ioctl.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/ioctl.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,2748 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <asm/io.h>
-+/* #include <asm/uaccess.h> */ /* required for 2.4.x kernels; verify_write() */
-+#include <linux/if_arp.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+
-+/* channel frequencies
-+ * TODO: Currently, every other 802.11 driver keeps its own copy of this. In
-+ * the long run this should be integrated into ieee802_11.h or wireless.h or
-+ * whatever IEEE802.11x framework evolves */
-+static const u16 acx_channel_freq[] = {
-+	2412, 2417, 2422, 2427, 2432, 2437, 2442,
-+	2447, 2452, 2457, 2462, 2467, 2472, 2484,
-+};
-+
-+
-+/***********************************************************************
-+** acx_ioctl_commit
-+*/
-+static int
-+acx_ioctl_commit(struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+	if (ACX_STATE_IFACE_UP & adev->dev_state_mask)
-+		acx_s_update_card_settings(adev);
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_name(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	static const char * const names[] = { "IEEE 802.11b+/g+", "IEEE 802.11b+" };
-+
-+	strcpy(wrqu->name, names[IS_ACX111(adev) ? 0 : 1]);
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_freq
-+*/
-+static int
-+acx_ioctl_set_freq(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int channel = -1;
-+	unsigned int mult = 1;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (wrqu->freq.e == 0 && wrqu->freq.m <= 1000) {
-+		/* Setting by channel number */
-+		channel = wrqu->freq.m;
-+	} else {
-+		/* If setting by frequency, convert to a channel */
-+		int i;
-+
-+		for (i = 0; i < (6 - wrqu->freq.e); i++)
-+			mult *= 10;
-+
-+		for (i = 1; i <= 14; i++)
-+			if (wrqu->freq.m == acx_channel_freq[i - 1] * mult)
-+				channel = i;
-+	}
-+
-+	if (channel > 14) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	adev->channel = channel;
-+	/* hmm, the following code part is strange, but this is how
-+	 * it was being done before... */
-+	log(L_IOCTL, "Changing to channel %d\n", channel);
-+	SET_BIT(adev->set_mask, GETSET_CHANNEL);
-+
-+	result = -EINPROGRESS; /* need to call commit handler */
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static inline int
-+acx_ioctl_get_freq(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	wrqu->freq.e = 0;
-+	wrqu->freq.m = adev->channel;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_mode
-+*/
-+static int
-+acx_ioctl_set_mode(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	switch (wrqu->mode) {
-+	case IW_MODE_AUTO:
-+		adev->mode = ACX_MODE_OFF;
-+		break;
-+	case IW_MODE_MONITOR:
-+		adev->mode = ACX_MODE_MONITOR;
-+		break;
-+	case IW_MODE_ADHOC:
-+		adev->mode = ACX_MODE_0_ADHOC;
-+		break;
-+	case IW_MODE_INFRA:
-+		adev->mode = ACX_MODE_2_STA;
-+		break;
-+	case IW_MODE_MASTER:
-+		printk("acx: master mode (HostAP) is very, very "
-+			"experimental! It might work partially, but "
-+			"better get prepared for nasty surprises "
-+			"at any time\n");
-+		adev->mode = ACX_MODE_3_AP;
-+		break;
-+	case IW_MODE_REPEAT:
-+	case IW_MODE_SECOND:
-+	default:
-+		result = -EOPNOTSUPP;
-+		goto end_unlock;
-+	}
-+
-+	log(L_ASSOC, "new adev->mode=%d\n", adev->mode);
-+	SET_BIT(adev->set_mask, GETSET_MODE);
-+	result = -EINPROGRESS;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_mode(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = 0;
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_OFF:
-+		wrqu->mode = IW_MODE_AUTO; break;
-+	case ACX_MODE_MONITOR:
-+		wrqu->mode = IW_MODE_MONITOR; break;
-+	case ACX_MODE_0_ADHOC:
-+		wrqu->mode = IW_MODE_ADHOC; break;
-+	case ACX_MODE_2_STA:
-+		wrqu->mode = IW_MODE_INFRA; break;
-+	case ACX_MODE_3_AP:
-+		wrqu->mode = IW_MODE_MASTER; break;
-+	default:
-+		result = -EOPNOTSUPP;
-+	}
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_set_sens(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->sens;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	adev->sensitivity = (1 == vwrq->disabled) ? 0 : vwrq->value;
-+	SET_BIT(adev->set_mask, GETSET_SENSITIVITY);
-+
-+	acx_sem_unlock(adev);
-+
-+	return -EINPROGRESS;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_sens(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->sens;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	if (IS_USB(adev))
-+		/* setting the PHY reg via fw cmd doesn't work yet */
-+		return -EOPNOTSUPP;
-+
-+	/* acx_sem_lock(adev); */
-+
-+	vwrq->value = adev->sensitivity;
-+	vwrq->disabled = (vwrq->value == 0);
-+	vwrq->fixed = 1;
-+
-+	/* acx_sem_unlock(adev); */
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_ap
-+**
-+** Sets the MAC address of the AP to associate with
-+*/
-+static int
-+acx_ioctl_set_ap(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct sockaddr *awrq = &wrqu->ap_addr;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = 0;
-+	const u8 *ap;
-+
-+	FN_ENTER;
-+	if (NULL == awrq) {
-+		result = -EFAULT;
-+		goto end;
-+	}
-+	if (ARPHRD_ETHER != awrq->sa_family) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	ap = awrq->sa_data;
-+	acxlog_mac(L_IOCTL, "set AP=", ap, "\n");
-+
-+	MAC_COPY(adev->ap, ap);
-+
-+	/* We want to start rescan in managed or ad-hoc mode,
-+	** otherwise just set adev->ap.
-+	** "iwconfig <if> ap <mac> mode managed": we must be able
-+	** to set ap _first_ and _then_ set mode */
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_2_STA:
-+		/* FIXME: if there is a convention on what zero AP means,
-+		** please add a comment about that. I don't know of any --vda */
-+		if (mac_is_zero(ap)) {
-+			/* "off" == 00:00:00:00:00:00 */
-+			MAC_BCAST(adev->ap);
-+			log(L_IOCTL, "Not reassociating\n");
-+		} else {
-+			log(L_IOCTL, "Forcing reassociation\n");
-+			SET_BIT(adev->set_mask, GETSET_RESCAN);
-+		}
-+		break;
-+	}
-+	result = -EINPROGRESS;
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_ap(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct sockaddr *awrq = &wrqu->ap_addr;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	if (ACX_STATUS_4_ASSOCIATED == adev->status) {
-+		/* as seen in Aironet driver, airo.c */
-+		MAC_COPY(awrq->sa_data, adev->bssid);
-+	} else {
-+		MAC_ZERO(awrq->sa_data);
-+	}
-+	awrq->sa_family = ARPHRD_ETHER;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_aplist
-+**
-+** Deprecated in favor of iwscan.
-+** We simply return the list of currently available stations in range,
-+** don't do a new scan.
-+*/
-+static int
-+acx_ioctl_get_aplist(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	struct sockaddr *address = (struct sockaddr *) extra;
-+	struct iw_quality qual[IW_MAX_AP];
-+	int i, cur;
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	/* we have AP list only in STA mode */
-+	if (ACX_MODE_2_STA != adev->mode) {
-+		result = -EOPNOTSUPP;
-+		goto end;
-+	}
-+
-+	cur = 0;
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		struct client *bss = &adev->sta_list[i];
-+		if (!bss->used) continue;
-+		MAC_COPY(address[cur].sa_data, bss->bssid);
-+		address[cur].sa_family = ARPHRD_ETHER;
-+		qual[cur].level = bss->sir;
-+		qual[cur].noise = bss->snr;
-+#ifndef OLD_QUALITY
-+		qual[cur].qual = acx_signal_determine_quality(qual[cur].level,
-+						    qual[cur].noise);
-+#else
-+		qual[cur].qual = (qual[cur].noise <= 100) ?
-+			       100 - qual[cur].noise : 0;
-+#endif
-+		/* no scan: level/noise/qual not updated: */
-+		qual[cur].updated = 0;
-+		cur++;
-+	}
-+	if (cur) {
-+		dwrq->flags = 1;
-+		memcpy(extra + sizeof(struct sockaddr)*cur, &qual,
-+				sizeof(struct iw_quality)*cur);
-+	}
-+	dwrq->length = cur;
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_set_scan(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* don't start scan if device is not up yet */
-+	if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) {
-+		result = -EAGAIN;
-+		goto end_unlock;
-+	}
-+
-+	/* This is NOT a rescan for new AP!
-+	** Do not use SET_BIT(GETSET_RESCAN); */
-+	acx_s_cmd_start_scan(adev);
-+	result = OK;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+/* end: */
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_s_scan_add_station
-+*/
-+/* helper. not sure whether it's really a _s_leeping fn */
-+static char*
-+acx_s_scan_add_station(
-+	acx_device_t *adev,
-+	char *ptr,
-+	char *end_buf,
-+	struct client *bss)
-+{
-+	struct iw_event iwe;
-+	char *ptr_rate;
-+
-+	FN_ENTER;
-+
-+	/* MAC address has to be added first */
-+	iwe.cmd = SIOCGIWAP;
-+	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-+	MAC_COPY(iwe.u.ap_addr.sa_data, bss->bssid);
-+	acxlog_mac(L_IOCTL, "scan, station address: ", bss->bssid, "\n");
-+	ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_ADDR_LEN);
-+
-+	/* Add ESSID */
-+	iwe.cmd = SIOCGIWESSID;
-+	iwe.u.data.length = bss->essid_len;
-+	iwe.u.data.flags = 1;
-+	log(L_IOCTL, "scan, essid: %s\n", bss->essid);
-+	ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid);
-+
-+	/* Add mode */
-+	iwe.cmd = SIOCGIWMODE;
-+	if (bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)) {
-+		if (bss->cap_info & WF_MGMT_CAP_ESS)
-+			iwe.u.mode = IW_MODE_MASTER;
-+		else
-+			iwe.u.mode = IW_MODE_ADHOC;
-+		log(L_IOCTL, "scan, mode: %d\n", iwe.u.mode);
-+		ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_UINT_LEN);
-+	}
-+
-+	/* Add frequency */
-+	iwe.cmd = SIOCGIWFREQ;
-+	iwe.u.freq.m = acx_channel_freq[bss->channel - 1] * 100000;
-+	iwe.u.freq.e = 1;
-+	log(L_IOCTL, "scan, frequency: %d\n", iwe.u.freq.m);
-+	ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_FREQ_LEN);
-+
-+	/* Add link quality */
-+	iwe.cmd = IWEVQUAL;
-+	/* FIXME: these values should be expressed in dBm, but we don't know
-+	 * how to calibrate it yet */
-+	iwe.u.qual.level = bss->sir;
-+	iwe.u.qual.noise = bss->snr;
-+#ifndef OLD_QUALITY
-+	iwe.u.qual.qual = acx_signal_determine_quality(iwe.u.qual.level,
-+							iwe.u.qual.noise);
-+#else
-+	iwe.u.qual.qual = (iwe.u.qual.noise <= 100) ?
-+				100 - iwe.u.qual.noise : 0;
-+#endif
-+	iwe.u.qual.updated = 7;
-+	log(L_IOCTL, "scan, link quality: %d/%d/%d\n",
-+			iwe.u.qual.level, iwe.u.qual.noise, iwe.u.qual.qual);
-+	ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_QUAL_LEN);
-+
-+	/* Add encryption */
-+	iwe.cmd = SIOCGIWENCODE;
-+	if (bss->cap_info & WF_MGMT_CAP_PRIVACY)
-+		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-+	else
-+		iwe.u.data.flags = IW_ENCODE_DISABLED;
-+	iwe.u.data.length = 0;
-+	log(L_IOCTL, "scan, encryption flags: %X\n", iwe.u.data.flags);
-+	ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid);
-+
-+	/* add rates */
-+	iwe.cmd = SIOCGIWRATE;
-+	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
-+	ptr_rate = ptr + IW_EV_LCP_LEN;
-+
-+	{
-+	u16 rate = bss->rate_cap;
-+	const u8* p = acx_bitpos2ratebyte;
-+	while (rate) {
-+		if (rate & 1) {
-+			iwe.u.bitrate.value = *p * 500000; /* units of 500kb/s */
-+			log(L_IOCTL, "scan, rate: %d\n", iwe.u.bitrate.value);
-+			ptr_rate = iwe_stream_add_value(ptr, ptr_rate, end_buf,
-+						&iwe, IW_EV_PARAM_LEN);
-+		}
-+		rate >>= 1;
-+		p++;
-+	}}
-+
-+	if ((ptr_rate - ptr) > (ptrdiff_t)IW_EV_LCP_LEN)
-+		ptr = ptr_rate;
-+
-+	/* drop remaining station data items for now */
-+
-+	FN_EXIT0;
-+	return ptr;
-+}
-+
-+
-+/***********************************************************************
-+ * acx_ioctl_get_scan
-+ */
-+static int
-+acx_ioctl_get_scan(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	char *ptr = extra;
-+	int i;
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* no scan available if device is not up yet */
-+	if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) {
-+		log(L_IOCTL, "iface not up yet\n");
-+		result = -EAGAIN;
-+		goto end_unlock;
-+	}
-+
-+#ifdef ENODATA_TO_BE_USED_AFTER_SCAN_ERROR_ONLY
-+	if (adev->bss_table_count == 0)	{
-+		/* no stations found */
-+		result = -ENODATA;
-+		goto end_unlock;
-+	}
-+#endif
-+
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		struct client *bss = &adev->sta_list[i];
-+		if (!bss->used) continue;
-+		ptr = acx_s_scan_add_station(adev, ptr,
-+			extra + IW_SCAN_MAX_DATA, bss);
-+	}
-+	dwrq->length = ptr - extra;
-+	dwrq->flags = 0;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+/* end: */
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_essid
-+*/
-+static int
-+acx_ioctl_set_essid(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->essid;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int len = dwrq->length;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (len < 0) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	log(L_IOCTL, "set ESSID '%*s', length %d, flags 0x%04X\n",
-+					len, extra, len, dwrq->flags);
-+
-+#if WIRELESS_EXT >= 21
-+	/* WE 21 gives real ESSID strlen, not +1 (trailing zero):
-+	 * see LKML "[patch] drivers/net/wireless: correct reported ssid lengths" */
-+	len += 1;
-+#endif
-+
-+	acx_sem_lock(adev);
-+
-+	/* ESSID disabled? */
-+	if (0 == dwrq->flags) {
-+		adev->essid_active = 0;
-+
-+	} else {
-+		if (len > IW_ESSID_MAX_SIZE)	{
-+			result = -E2BIG;
-+			goto end_unlock;
-+		}
-+
-+		if (len >= sizeof(adev->essid))
-+			len = sizeof(adev->essid) - 1;
-+		memcpy(adev->essid, extra, len);
-+		adev->essid[len] = '\0';
-+		/* Paranoia: just in case there is a '\0'... */
-+		adev->essid_len = strlen(adev->essid);
-+		adev->essid_active = 1;
-+	}
-+
-+	SET_BIT(adev->set_mask, GETSET_RESCAN);
-+
-+	result = -EINPROGRESS;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_essid(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->essid;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	dwrq->flags = adev->essid_active;
-+	if (adev->essid_active)	{
-+		memcpy(extra, adev->essid, adev->essid_len);
-+		extra[adev->essid_len] = '\0';
-+		dwrq->length = adev->essid_len + 1;
-+		dwrq->flags = 1;
-+	}
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_l_update_client_rates
-+*/
-+static void
-+acx_l_update_client_rates(acx_device_t *adev, u16 rate)
-+{
-+	int i;
-+	for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+		client_t *clt = &adev->sta_list[i];
-+		if (!clt->used)	continue;
-+		clt->rate_cfg = (clt->rate_cap & rate);
-+		if (!clt->rate_cfg) {
-+			/* no compatible rates left: kick client */
-+			acxlog_mac(L_ASSOC, "client ",clt->address," kicked: "
-+				"rates are not compatible anymore\n");
-+			acx_l_sta_list_del(adev, clt);
-+			continue;
-+		}
-+		clt->rate_cur &= clt->rate_cfg;
-+		if (!clt->rate_cur) {
-+			/* current rate become invalid, choose a valid one */
-+			clt->rate_cur = 1 << lowest_bit(clt->rate_cfg);
-+		}
-+		if (IS_ACX100(adev))
-+			clt->rate_100 = acx_bitpos2rate100[highest_bit(clt->rate_cur)];
-+		clt->fallback_count = clt->stepup_count = 0;
-+		clt->ignore_count = 16;
-+	}
-+	switch (adev->mode) {
-+	case ACX_MODE_2_STA:
-+		if (adev->ap_client && !adev->ap_client->used) {
-+			/* Owwww... we kicked our AP!! :) */
-+			SET_BIT(adev->set_mask, GETSET_RESCAN);
-+		}
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+/* maps bits from acx111 rate to rate in Mbits */
-+static const unsigned int
-+acx111_rate_tbl[] = {
-+     1000000, /* 0 */
-+     2000000, /* 1 */
-+     5500000, /* 2 */
-+     6000000, /* 3 */
-+     9000000, /* 4 */
-+    11000000, /* 5 */
-+    12000000, /* 6 */
-+    18000000, /* 7 */
-+    22000000, /* 8 */
-+    24000000, /* 9 */
-+    36000000, /* 10 */
-+    48000000, /* 11 */
-+    54000000, /* 12 */
-+      500000, /* 13, should not happen */
-+      500000, /* 14, should not happen */
-+      500000, /* 15, should not happen */
-+};
-+
-+/***********************************************************************
-+ * acx_ioctl_set_rate
-+ */
-+static int
-+acx_ioctl_set_rate(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->param;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	u16 txrate_cfg = 1;
-+	unsigned long flags;
-+	int autorate;
-+	int result = -EINVAL;
-+
-+	FN_ENTER;
-+	log(L_IOCTL, "rate %d fixed 0x%X disabled 0x%X flags 0x%X\n",
-+		vwrq->value, vwrq->fixed, vwrq->disabled, vwrq->flags);
-+
-+	if ((0 == vwrq->fixed) || (1 == vwrq->fixed)) {
-+		int i = VEC_SIZE(acx111_rate_tbl)-1;
-+		if (vwrq->value == -1)
-+			/* "iwconfig rate auto" --> choose highest */
-+			vwrq->value = IS_ACX100(adev) ?	22000000 : 54000000;
-+		while (i >= 0) {
-+			if (vwrq->value == acx111_rate_tbl[i]) {
-+				txrate_cfg <<= i;
-+				i = 0;
-+				break;
-+			}
-+			i--;
-+		}
-+		if (i == -1) { /* no matching rate */
-+			result = -EINVAL;
-+			goto end;
-+		}
-+	} else {	/* rate N, N<1000 (driver specific): we don't use this */
-+		result = -EOPNOTSUPP;
-+		goto end;
-+	}
-+	/* now: only one bit is set in txrate_cfg, corresponding to
-+	** indicated rate */
-+
-+	autorate = (vwrq->fixed == 0) && (RATE111_1 != txrate_cfg);
-+	if (autorate) {
-+		/* convert 00100000 -> 00111111 */
-+		txrate_cfg = (txrate_cfg<<1)-1;
-+	}
-+
-+	if (IS_ACX100(adev)) {
-+		txrate_cfg &= RATE111_ACX100_COMPAT;
-+		if (!txrate_cfg) {
-+			result = -ENOTSUPP; /* rate is not supported by acx100 */
-+			goto end;
-+		}
-+	}
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+
-+	adev->rate_auto = autorate;
-+	adev->rate_oper = txrate_cfg;
-+	adev->rate_basic = txrate_cfg;
-+	/* only do that in auto mode, non-auto will be able to use
-+	 * one specific Tx rate only anyway */
-+	if (autorate) {
-+		/* only use 802.11b base rates, for standard 802.11b H/W
-+		 * compatibility */
-+		adev->rate_basic &= RATE111_80211B_COMPAT;
-+	}
-+	adev->rate_bcast = 1 << lowest_bit(txrate_cfg);
-+	if (IS_ACX100(adev))
-+		adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast);
-+	acx_l_update_ratevector(adev);
-+	acx_l_update_client_rates(adev, txrate_cfg);
-+
-+	/* Do/don't do tx rate fallback; beacon contents and rate */
-+	SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES);
-+	result = -EINPROGRESS;
-+
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_rate
-+*/
-+static int
-+acx_ioctl_get_rate(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->param;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	u16 rate;
-+
-+	acx_lock(adev, flags);
-+	rate = adev->rate_oper;
-+	if (adev->ap_client)
-+		rate = adev->ap_client->rate_cur;
-+	vwrq->value = acx111_rate_tbl[highest_bit(rate)];
-+	vwrq->fixed = !adev->rate_auto;
-+	vwrq->disabled = 0;
-+	acx_unlock(adev, flags);
-+
-+	return OK;
-+}
-+
-+static int
-+acx_ioctl_set_rts(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->rts;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int val = vwrq->value;
-+
-+	if (vwrq->disabled)
-+		val = 2312;
-+	if ((val < 0) || (val > 2312))
-+		return -EINVAL;
-+
-+	adev->rts_threshold = val;
-+	return OK;
-+}
-+
-+static inline int
-+acx_ioctl_get_rts(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->rts;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	vwrq->value = adev->rts_threshold;
-+	vwrq->disabled = (vwrq->value >= 2312);
-+	vwrq->fixed = 1;
-+	return OK;
-+}
-+
-+
-+#if ACX_FRAGMENTATION
-+static int
-+acx_ioctl_set_frag(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int val = vwrq->value;
-+
-+	if (vwrq->disabled)
-+		val = 32767;
-+	else
-+	if ((val < 256) || (val > 2347))
-+		return -EINVAL;
-+
-+	adev->frag_threshold = val;
-+	return OK;
-+}
-+
-+static inline int
-+acx_ioctl_get_frag(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->frag;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	vwrq->value = adev->frag_threshold;
-+	vwrq->disabled = (vwrq->value >= 2347);
-+	vwrq->fixed = 1;
-+	return OK;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_encode
-+*/
-+static int
-+acx_ioctl_set_encode(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->encoding;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int index;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "set encoding flags=0x%04X, size=%d, key: %s\n",
-+			dwrq->flags, dwrq->length, extra ? "set" : "No key");
-+
-+	acx_sem_lock(adev);
-+
-+	index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
-+
-+	if (dwrq->length > 0) {
-+		/* if index is 0 or invalid, use default key */
-+		if ((index < 0) || (index > 3))
-+			index = (int)adev->wep_current_index;
-+
-+		if (0 == (dwrq->flags & IW_ENCODE_NOKEY)) {
-+			if (dwrq->length > 29)
-+				dwrq->length = 29; /* restrict it */
-+
-+			if (dwrq->length > 13) {
-+				/* 29*8 == 232, WEP256 */
-+				adev->wep_keys[index].size = 29;
-+			} else if (dwrq->length > 5) {
-+				/* 13*8 == 104bit, WEP128 */
-+				adev->wep_keys[index].size = 13;
-+			} else if (dwrq->length > 0) {
-+				/* 5*8 == 40bit, WEP64 */
-+				adev->wep_keys[index].size = 5;
-+			} else {
-+				/* disable key */
-+				adev->wep_keys[index].size = 0;
-+			}
-+
-+			memset(adev->wep_keys[index].key, 0,
-+				sizeof(adev->wep_keys[index].key));
-+			memcpy(adev->wep_keys[index].key, extra, dwrq->length);
-+		}
-+	} else {
-+		/* set transmit key */
-+		if ((index >= 0) && (index <= 3))
-+			adev->wep_current_index = index;
-+		else if (0 == (dwrq->flags & IW_ENCODE_MODE)) {
-+			/* complain if we were not just setting
-+			 * the key mode */
-+			result = -EINVAL;
-+			goto end_unlock;
-+		}
-+	}
-+
-+	adev->wep_enabled = !(dwrq->flags & IW_ENCODE_DISABLED);
-+
-+	if (dwrq->flags & IW_ENCODE_OPEN) {
-+		adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM;
-+		adev->wep_restricted = 0;
-+
-+	} else if (dwrq->flags & IW_ENCODE_RESTRICTED) {
-+		adev->auth_alg = WLAN_AUTH_ALG_SHAREDKEY;
-+		adev->wep_restricted = 1;
-+	}
-+
-+	/* set flag to make sure the card WEP settings get updated */
-+	SET_BIT(adev->set_mask, GETSET_WEP);
-+
-+	log(L_IOCTL, "len=%d, key at 0x%p, flags=0x%X\n",
-+		dwrq->length, extra, dwrq->flags);
-+
-+	for (index = 0; index <= 3; index++) {
-+		if (adev->wep_keys[index].size) {
-+			log(L_IOCTL,	"index=%d, size=%d, key at 0x%p\n",
-+				adev->wep_keys[index].index,
-+				(int) adev->wep_keys[index].size,
-+				adev->wep_keys[index].key);
-+		}
-+	}
-+	result = -EINPROGRESS;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_encode
-+*/
-+static int
-+acx_ioctl_get_encode(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->encoding;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
-+
-+	FN_ENTER;
-+
-+	if (adev->wep_enabled == 0) {
-+		dwrq->flags = IW_ENCODE_DISABLED;
-+	} else {
-+		if ((index < 0) || (index > 3))
-+			index = (int)adev->wep_current_index;
-+
-+		dwrq->flags = (adev->wep_restricted == 1) ?
-+				IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN;
-+		dwrq->length = adev->wep_keys[index].size;
-+
-+		memcpy(extra, adev->wep_keys[index].key,
-+			      adev->wep_keys[index].size);
-+	}
-+
-+	/* set the current index */
-+	SET_BIT(dwrq->flags, index + 1);
-+
-+	log(L_IOCTL, "len=%d, key=%p, flags=0x%X\n",
-+	       dwrq->length, dwrq->pointer,
-+	       dwrq->flags);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_set_power(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->power;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = -EINPROGRESS;
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "set 802.11 powersave flags=0x%04X\n", vwrq->flags);
-+
-+	acx_sem_lock(adev);
-+
-+	if (vwrq->disabled) {
-+		CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE);
-+		SET_BIT(adev->set_mask, GETSET_POWER_80211);
-+		goto end;
-+	}
-+	if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
-+		u16 ps_timeout = (vwrq->value * 1024) / 1000;
-+
-+		if (ps_timeout > 255)
-+			ps_timeout = 255;
-+		log(L_IOCTL, "setting PS timeout value to %d time units "
-+				"due to %dus\n", ps_timeout, vwrq->value);
-+		adev->ps_hangover_period = ps_timeout;
-+	} else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) {
-+		u16 ps_periods = vwrq->value / 1000000;
-+
-+		if (ps_periods > 255)
-+			ps_periods = 255;
-+		log(L_IOCTL, "setting PS period value to %d periods "
-+				"due to %dus\n", ps_periods, vwrq->value);
-+		adev->ps_listen_interval = ps_periods;
-+		CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_MODE_MASK);
-+		SET_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_EACH_ITVL);
-+	}
-+
-+	switch (vwrq->flags & IW_POWER_MODE) {
-+		/* FIXME: are we doing the right thing here? */
-+		case IW_POWER_UNICAST_R:
-+			CLEAR_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS);
-+			break;
-+		case IW_POWER_MULTICAST_R:
-+			SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS);
-+			break;
-+		case IW_POWER_ALL_R:
-+			SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS);
-+			break;
-+		case IW_POWER_ON:
-+			break;
-+		default:
-+			log(L_IOCTL, "unknown PS mode\n");
-+			result = -EINVAL;
-+			goto end;
-+	}
-+
-+	SET_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE);
-+	SET_BIT(adev->set_mask, GETSET_POWER_80211);
-+end:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx_ioctl_get_power(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->power;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "Get 802.11 Power Save flags = 0x%04X\n", vwrq->flags);
-+	vwrq->disabled = ((adev->ps_wakeup_cfg & PS_CFG_ENABLE) == 0);
-+	if (vwrq->disabled)
-+		goto end;
-+
-+	if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
-+		vwrq->value = adev->ps_hangover_period * 1000 / 1024;
-+		vwrq->flags = IW_POWER_TIMEOUT;
-+	} else {
-+		vwrq->value = adev->ps_listen_interval * 1000000;
-+		vwrq->flags = IW_POWER_PERIOD|IW_POWER_RELATIVE;
-+	}
-+	if (adev->ps_options & PS_OPT_STILL_RCV_BCASTS)
-+		SET_BIT(vwrq->flags, IW_POWER_ALL_R);
-+	else
-+		SET_BIT(vwrq->flags, IW_POWER_UNICAST_R);
-+end:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_txpow
-+*/
-+static inline int
-+acx_ioctl_get_txpow(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->power;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	vwrq->flags = IW_TXPOW_DBM;
-+	vwrq->disabled = 0;
-+	vwrq->fixed = 1;
-+	vwrq->value = adev->tx_level_dbm;
-+
-+	log(L_IOCTL, "get txpower:%d dBm\n", adev->tx_level_dbm);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_txpow
-+*/
-+static int
-+acx_ioctl_set_txpow(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->power;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "set txpower:%d, disabled:%d, flags:0x%04X\n",
-+			vwrq->value, vwrq->disabled, vwrq->flags);
-+
-+	acx_sem_lock(adev);
-+
-+	if (vwrq->disabled != adev->tx_disabled) {
-+		SET_BIT(adev->set_mask, GETSET_TX);
-+	}
-+
-+	adev->tx_disabled = vwrq->disabled;
-+	if (vwrq->value == -1) {
-+		if (vwrq->disabled) {
-+			adev->tx_level_dbm = 0;
-+			log(L_IOCTL, "disable radio tx\n");
-+		} else {
-+			/* adev->tx_level_auto = 1; */
-+			log(L_IOCTL, "set tx power auto (NIY)\n");
-+		}
-+	} else {
-+		adev->tx_level_dbm = vwrq->value <= 20 ? vwrq->value : 20;
-+		/* adev->tx_level_auto = 0; */
-+		log(L_IOCTL, "set txpower=%d dBm\n", adev->tx_level_dbm);
-+	}
-+	SET_BIT(adev->set_mask, GETSET_TXPOWER);
-+
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_range
-+*/
-+static int
-+acx_ioctl_get_range(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	struct iw_range *range = (struct iw_range *)extra;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int i,n;
-+
-+	FN_ENTER;
-+
-+	if (!dwrq->pointer)
-+		goto end;
-+
-+	dwrq->length = sizeof(struct iw_range);
-+	memset(range, 0, sizeof(struct iw_range));
-+	n = 0;
-+	for (i = 1; i <= 14; i++) {
-+		if (adev->reg_dom_chanmask & (1 << (i - 1))) {
-+			range->freq[n].i = i;
-+			range->freq[n].m = acx_channel_freq[i - 1] * 100000;
-+			range->freq[n].e = 1; /* units are MHz */
-+			n++;
-+		}
-+	}
-+	range->num_channels = n;
-+	range->num_frequency = n;
-+
-+	range->min_rts = 0;
-+	range->max_rts = 2312;
-+
-+#if ACX_FRAGMENTATION
-+	range->min_frag = 256;
-+	range->max_frag = 2312;
-+#endif
-+
-+	range->encoding_size[0] = 5;
-+	range->encoding_size[1] = 13;
-+	range->encoding_size[2] = 29;
-+	range->num_encoding_sizes = 3;
-+	range->max_encoding_tokens = 4;
-+
-+	range->min_pmp = 0;
-+	range->max_pmp = 5000000;
-+	range->min_pmt = 0;
-+	range->max_pmt = 65535 * 1000;
-+	range->pmp_flags = IW_POWER_PERIOD;
-+	range->pmt_flags = IW_POWER_TIMEOUT;
-+	range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R;
-+
-+	if (IS_ACX100(adev)) { /* ACX100 has direct radio programming - arbitrary levels, so offer a lot */
-+		for (i = 0; i <= IW_MAX_TXPOWER - 1; i++)
-+			range->txpower[i] = 20 * i / (IW_MAX_TXPOWER - 1);
-+		range->num_txpower = IW_MAX_TXPOWER;
-+		range->txpower_capa = IW_TXPOW_DBM;
-+	}
-+	else {
-+		int count = min(IW_MAX_TXPOWER, (int)adev->cfgopt_power_levels.len);
-+		for (i = 0; i <= count; i++)
-+			range->txpower[i] = adev->cfgopt_power_levels.list[i];
-+		range->num_txpower = count;
-+		/* this list is given in mW */
-+		range->txpower_capa = IW_TXPOW_MWATT;
-+	}
-+
-+	range->we_version_compiled = WIRELESS_EXT;
-+	range->we_version_source = 0x9;
-+
-+	range->retry_capa = IW_RETRY_LIMIT;
-+	range->retry_flags = IW_RETRY_LIMIT;
-+	range->min_retry = 1;
-+	range->max_retry = 255;
-+
-+	range->r_time_flags = IW_RETRY_LIFETIME;
-+	range->min_r_time = 0;
-+	/* FIXME: lifetime ranges and orders of magnitude are strange?? */
-+	range->max_r_time = 65535;
-+
-+	if (IS_USB(adev))
-+		range->sensitivity = 0;
-+	else if (IS_ACX111(adev))
-+		range->sensitivity = 3;
-+	else
-+		range->sensitivity = 255;
-+
-+	for (i=0; i < adev->rate_supported_len; i++) {
-+		range->bitrate[i] = (adev->rate_supported[i] & ~0x80) * 500000;
-+		/* never happens, but keep it, to be safe: */
-+		if (range->bitrate[i] == 0)
-+			break;
-+	}
-+	range->num_bitrates = i;
-+
-+	range->max_qual.qual = 100;
-+	range->max_qual.level = 100;
-+	range->max_qual.noise = 100;
-+	/* TODO: better values */
-+	range->avg_qual.qual = 90;
-+	range->avg_qual.level = 80;
-+	range->avg_qual.noise = 2;
-+
-+end:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** Private functions
-+*/
-+
-+/***********************************************************************
-+** acx_ioctl_get_nick
-+*/
-+static inline int
-+acx_ioctl_get_nick(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	strcpy(extra, adev->nick);
-+	dwrq->length = strlen(extra) + 1;
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_nick
-+*/
-+static int
-+acx_ioctl_set_nick(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_point *dwrq = &wrqu->data;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	if (dwrq->length > IW_ESSID_MAX_SIZE + 1) {
-+		result = -E2BIG;
-+		goto end_unlock;
-+	}
-+
-+	/* extra includes trailing \0, so it's ok */
-+	strcpy(adev->nick, extra);
-+	result = OK;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_retry
-+*/
-+static int
-+acx_ioctl_get_retry(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->retry;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned int type = vwrq->flags & IW_RETRY_TYPE;
-+	unsigned int modifier = vwrq->flags & IW_RETRY_MODIFIER;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* return the short retry number by default */
-+	if (type == IW_RETRY_LIFETIME) {
-+		vwrq->flags = IW_RETRY_LIFETIME;
-+		vwrq->value = adev->msdu_lifetime;
-+	} else if (modifier == IW_RETRY_MAX) {
-+		vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
-+		vwrq->value = adev->long_retry;
-+	} else {
-+		vwrq->flags = IW_RETRY_LIMIT;
-+		if (adev->long_retry != adev->short_retry)
-+			SET_BIT(vwrq->flags, IW_RETRY_MIN);
-+		vwrq->value = adev->short_retry;
-+	}
-+
-+	/* can't be disabled */
-+	vwrq->disabled = (u8)0;
-+	result = OK;
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_retry
-+*/
-+static int
-+acx_ioctl_set_retry(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->retry;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (!vwrq) {
-+		result = -EFAULT;
-+		goto end;
-+	}
-+	if (vwrq->disabled) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	result = -EINVAL;
-+	if (IW_RETRY_LIMIT == (vwrq->flags & IW_RETRY_TYPE)) {
-+		printk("old retry limits: short %d long %d\n",
-+				adev->short_retry, adev->long_retry);
-+		if (vwrq->flags & IW_RETRY_MAX) {
-+			adev->long_retry = vwrq->value;
-+		} else if (vwrq->flags & IW_RETRY_MIN) {
-+			adev->short_retry = vwrq->value;
-+		} else {
-+			/* no modifier: set both */
-+			adev->long_retry = vwrq->value;
-+			adev->short_retry = vwrq->value;
-+		}
-+		printk("new retry limits: short %d long %d\n",
-+				adev->short_retry, adev->long_retry);
-+		SET_BIT(adev->set_mask, GETSET_RETRY);
-+		result = -EINPROGRESS;
-+	}
-+	else if (vwrq->flags & IW_RETRY_LIFETIME) {
-+		adev->msdu_lifetime = vwrq->value;
-+		printk("new MSDU lifetime: %d\n", adev->msdu_lifetime);
-+		SET_BIT(adev->set_mask, SET_MSDU_LIFETIME);
-+		result = -EINPROGRESS;
-+	}
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/************************ private ioctls ******************************/
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_debug
-+*/
-+#if ACX_DEBUG
-+static int
-+acx_ioctl_set_debug(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	unsigned int debug_new = *((unsigned int *)extra);
-+	int result = -EINVAL;
-+
-+	log(L_ANY, "setting debug from %04X to %04X\n", acx_debug, debug_new);
-+	acx_debug = debug_new;
-+
-+	result = OK;
-+	return result;
-+
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** acx_ioctl_list_reg_domain
-+*/
-+static int
-+acx_ioctl_list_reg_domain(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	int i = 1;
-+	const char * const *entry = acx_reg_domain_strings;
-+
-+	printk("dom# chan# domain/country\n");
-+	while (*entry)
-+		printk("%4d %s\n", i++, *entry++);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_reg_domain
-+*/
-+static int
-+acx_ioctl_set_reg_domain(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if ((*extra < 1) || ((size_t)*extra > acx_reg_domain_ids_len)) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	adev->reg_dom_id = acx_reg_domain_ids[*extra - 1];
-+	SET_BIT(adev->set_mask, GETSET_REG_DOMAIN);
-+
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_reg_domain
-+*/
-+static int
-+acx_ioctl_get_reg_domain(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int dom,i;
-+
-+	/* no locking */
-+	dom = adev->reg_dom_id;
-+
-+	for (i = 1; i <= acx_reg_domain_ids_len; i++) {
-+		if (acx_reg_domain_ids[i-1] == dom) {
-+			log(L_IOCTL, "regulatory domain is currently set "
-+				"to %d (0x%X): %s\n", i, dom,
-+				acx_reg_domain_strings[i-1]);
-+			*extra = i;
-+			break;
-+		}
-+	}
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_short_preamble
-+*/
-+static const char * const
-+preamble_modes[] = {
-+	"off",
-+	"on",
-+	"auto (peer capability dependent)",
-+	"unknown mode, error"
-+};
-+
-+static int
-+acx_ioctl_set_short_preamble(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int i;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if ((unsigned char)*extra > 2) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	adev->preamble_mode = (u8)*extra;
-+	switch (adev->preamble_mode) {
-+	case 0: /* long */
-+		adev->preamble_cur = 0;
-+		break;
-+	case 1:
-+		/* short, kick incapable peers */
-+		adev->preamble_cur = 1;
-+		for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+			client_t *clt = &adev->sta_list[i];
-+			if (!clt->used) continue;
-+			if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) {
-+				clt->used = CLIENT_EMPTY_SLOT_0;
-+			}
-+		}
-+		switch (adev->mode) {
-+		case ACX_MODE_2_STA:
-+			if (adev->ap_client && !adev->ap_client->used) {
-+				/* We kicked our AP :) */
-+				SET_BIT(adev->set_mask, GETSET_RESCAN);
-+			}
-+		}
-+		break;
-+	case 2: /* auto. short only if all peers are short-capable */
-+		adev->preamble_cur = 1;
-+		for (i = 0; i < VEC_SIZE(adev->sta_list); i++) {
-+			client_t *clt = &adev->sta_list[i];
-+			if (!clt->used) continue;
-+			if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) {
-+				adev->preamble_cur = 0;
-+				break;
-+			}
-+		}
-+		break;
-+	}
-+	printk("new short preamble setting: configured %s, active %s\n",
-+			preamble_modes[adev->preamble_mode],
-+			preamble_modes[adev->preamble_cur]);
-+	result = OK;
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_short_preamble
-+*/
-+static int
-+acx_ioctl_get_short_preamble(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	printk("current short preamble setting: configured %s, active %s\n",
-+			preamble_modes[adev->preamble_mode],
-+			preamble_modes[adev->preamble_cur]);
-+
-+	*extra = (char)adev->preamble_mode;
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_antenna
-+**
-+** TX and RX antenna can be set separately but this function good
-+** for testing 0-4 bits
-+*/
-+static int
-+acx_ioctl_set_antenna(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	printk("old antenna value: 0x%02X (COMBINED bit mask)\n"
-+		     "Rx antenna selection:\n"
-+		     "0x00 ant. 1\n"
-+		     "0x40 ant. 2\n"
-+		     "0x80 full diversity\n"
-+		     "0xc0 partial diversity\n"
-+		     "0x0f dwell time mask (in units of us)\n"
-+		     "Tx antenna selection:\n"
-+		     "0x00 ant. 2\n" /* yep, those ARE reversed! */
-+		     "0x20 ant. 1\n"
-+		     "new antenna value: 0x%02X\n",
-+		     adev->antenna, (u8)*extra);
-+
-+	adev->antenna = (u8)*extra;
-+	SET_BIT(adev->set_mask, GETSET_ANTENNA);
-+
-+	acx_sem_unlock(adev);
-+
-+	return -EINPROGRESS;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_antenna
-+*/
-+static int
-+acx_ioctl_get_antenna(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	/* no locking. it's pointless to lock a single load */
-+	printk("current antenna value: 0x%02X (COMBINED bit mask)\n"
-+		     "Rx antenna selection:\n"
-+		     "0x00 ant. 1\n"
-+		     "0x40 ant. 2\n"
-+		     "0x80 full diversity\n"
-+		     "0xc0 partial diversity\n"
-+		     "Tx antenna selection:\n"
-+		     "0x00 ant. 2\n" /* yep, those ARE reversed! */
-+		     "0x20 ant. 1\n", adev->antenna);
-+
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_rx_antenna
-+**
-+** 0 = antenna1; 1 = antenna2; 2 = full diversity; 3 = partial diversity
-+** Could anybody test which antenna is the external one?
-+*/
-+static int
-+acx_ioctl_set_rx_antenna(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (*extra > 3) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	printk("old antenna value: 0x%02X\n", adev->antenna);
-+
-+	acx_sem_lock(adev);
-+
-+	adev->antenna &= 0x3f;
-+	SET_BIT(adev->antenna, (*extra << 6));
-+	SET_BIT(adev->set_mask, GETSET_ANTENNA);
-+	printk("new antenna value: 0x%02X\n", adev->antenna);
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_tx_antenna
-+**
-+** Arguments: 0 == antenna2; 1 == antenna1;
-+** Could anybody test which antenna is the external one?
-+*/
-+static int
-+acx_ioctl_set_tx_antenna(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	if (*extra > 1) {
-+		result = -EINVAL;
-+		goto end;
-+	}
-+
-+	printk("old antenna value: 0x%02X\n", adev->antenna);
-+
-+	acx_sem_lock(adev);
-+
-+	adev->antenna &= ~0x30;
-+	SET_BIT(adev->antenna, ((*extra & 0x01) << 5));
-+	SET_BIT(adev->set_mask, GETSET_ANTENNA);
-+	printk("new antenna value: 0x%02X\n", adev->antenna);
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_wlansniff
-+**
-+** can we just remove this in favor of monitor mode? --vda
-+*/
-+static int
-+acx_ioctl_wlansniff(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned int *params = (unsigned int*)extra;
-+	unsigned int enable = (unsigned int)(params[0] > 0);
-+	int result;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* not using printk() here, since it distorts kismet display
-+	 * when printk messages activated */
-+	log(L_IOCTL, "setting monitor to: 0x%02X\n", params[0]);
-+
-+	switch (params[0]) {
-+	case 0:
-+		/* no monitor mode. hmm, should we simply ignore it
-+		 * or go back to enabling adev->netdev->type ARPHRD_ETHER? */
-+		break;
-+	case 1:
-+		adev->monitor_type = ARPHRD_IEEE80211_PRISM;
-+		break;
-+	case 2:
-+		adev->monitor_type = ARPHRD_IEEE80211;
-+		break;
-+	}
-+
-+	if (params[0]) {
-+		adev->mode = ACX_MODE_MONITOR;
-+		SET_BIT(adev->set_mask, GETSET_MODE);
-+	}
-+
-+	if (enable) {
-+		adev->channel = params[1];
-+		SET_BIT(adev->set_mask, GETSET_RX);
-+	}
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_unknown11
-+** FIXME: looks like some sort of "iwpriv kick_sta MAC" but it's broken
-+*/
-+static int
-+acx_ioctl_unknown11(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+#ifdef BROKEN
-+	struct iw_param *vwrq = &wrqu->param;
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	client_t client;
-+	int result;
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+
-+	acx_l_transmit_disassoc(adev, &client);
-+	result = OK;
-+
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+#endif
-+	return -EINVAL;
-+}
-+
-+
-+/***********************************************************************
-+** debug helper function to be able to debug various issues relatively easily
-+*/
-+static int
-+acx_ioctl_dbg_set_masks(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	const unsigned int *params = (unsigned int*)extra;
-+	int result;
-+
-+	acx_sem_lock(adev);
-+
-+	log(L_IOCTL, "setting flags in settings mask: "
-+			"get_mask %08X set_mask %08X\n"
-+			"before: get_mask %08X set_mask %08X\n",
-+			params[0], params[1],
-+			adev->get_mask, adev->set_mask);
-+	SET_BIT(adev->get_mask, params[0]);
-+	SET_BIT(adev->set_mask, params[1]);
-+	log(L_IOCTL, "after: get_mask %08X set_mask %08X\n",
-+			adev->get_mask, adev->set_mask);
-+	result = -EINPROGRESS; /* immediately call commit handler */
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+* acx_ioctl_set_rates
-+*
-+* This ioctl takes string parameter. Examples:
-+* iwpriv wlan0 SetRates "1,2"
-+*	use 1 and 2 Mbit rates, both are in basic rate set
-+* iwpriv wlan0 SetRates "1,2 5,11"
-+*	use 1,2,5.5,11 Mbit rates. 1 and 2 are basic
-+* iwpriv wlan0 SetRates "1,2 5c,11c"
-+*	same ('c' means 'CCK modulation' and it is a default for 5 and 11)
-+* iwpriv wlan0 SetRates "1,2 5p,11p"
-+*	use 1,2,5.5,11 Mbit, 1,2 are basic. 5 and 11 are using PBCC
-+* iwpriv wlan0 SetRates "1,2,5,11 22p"
-+*	use 1,2,5.5,11,22 Mbit. 1,2,5.5 and 11 are basic. 22 is using PBCC
-+*	(this is the maximum acx100 can do (modulo x4 mode))
-+* iwpriv wlan0 SetRates "1,2,5,11 22"
-+*	same. 802.11 defines only PBCC modulation
-+*	for 22 and 33 Mbit rates, so there is no ambiguity
-+* iwpriv wlan0 SetRates "1,2,5,11 6o,9o,12o,18o,24o,36o,48o,54o"
-+*	1,2,5.5 and 11 are basic. 11g OFDM rates are enabled but
-+*	they are not in basic rate set.	22 Mbit is disabled.
-+* iwpriv wlan0 SetRates "1,2,5,11 6,9,12,18,24,36,48,54"
-+*	same. OFDM is default for 11g rates except 22 and 33 Mbit,
-+*	thus 'o' is optional
-+* iwpriv wlan0 SetRates "1,2,5,11 6d,9d,12d,18d,24d,36d,48d,54d"
-+*	1,2,5.5 and 11 are basic. 11g CCK-OFDM rates are enabled
-+*	(acx111 does not support CCK-OFDM, driver will reject this cmd)
-+* iwpriv wlan0 SetRates "6,9,12 18,24,36,48,54"
-+*	6,9,12 are basic, rest of 11g rates is enabled. Using OFDM
-+*/
-+#include "setrate.c"
-+
-+/* disallow: 33Mbit (unsupported by hw) */
-+/* disallow: CCKOFDM (unsupported by hw) */
-+static int
-+acx111_supported(int mbit, int modulation, void *opaque)
-+{
-+	if (mbit==33) return -ENOTSUPP;
-+	if (modulation==DOT11_MOD_CCKOFDM) return -ENOTSUPP;
-+	return OK;
-+}
-+
-+static const u16
-+acx111mask[] = {
-+	[DOT11_RATE_1 ] = RATE111_1 ,
-+	[DOT11_RATE_2 ] = RATE111_2 ,
-+	[DOT11_RATE_5 ] = RATE111_5 ,
-+	[DOT11_RATE_11] = RATE111_11,
-+	[DOT11_RATE_22] = RATE111_22,
-+	/* [DOT11_RATE_33] = */
-+	[DOT11_RATE_6 ] = RATE111_6 ,
-+	[DOT11_RATE_9 ] = RATE111_9 ,
-+	[DOT11_RATE_12] = RATE111_12,
-+	[DOT11_RATE_18] = RATE111_18,
-+	[DOT11_RATE_24] = RATE111_24,
-+	[DOT11_RATE_36] = RATE111_36,
-+	[DOT11_RATE_48] = RATE111_48,
-+	[DOT11_RATE_54] = RATE111_54,
-+};
-+
-+static u32
-+acx111_gen_mask(int mbit, int modulation, void *opaque)
-+{
-+	/* lower 16 bits show selected 1, 2, CCK and OFDM rates */
-+	/* upper 16 bits show selected PBCC rates */
-+	u32 m = acx111mask[rate_mbit2enum(mbit)];
-+	if (modulation==DOT11_MOD_PBCC)
-+		return m<<16;
-+	return m;
-+}
-+
-+static int
-+verify_rate(u32 rate, int chip_type)
-+{
-+	/* never happens. be paranoid */
-+	if (!rate) return -EINVAL;
-+
-+	/* disallow: mixing PBCC and CCK at 5 and 11Mbit
-+	** (can be supported, but needs complicated handling in tx code) */
-+	if (( rate & ((RATE111_11+RATE111_5)<<16) )
-+	&&  ( rate & (RATE111_11+RATE111_5) )
-+	) {
-+		return -ENOTSUPP;
-+	}
-+	if (CHIPTYPE_ACX100 == chip_type) {
-+		if ( rate & ~(RATE111_ACX100_COMPAT+(RATE111_ACX100_COMPAT<<16)) )
-+			return -ENOTSUPP;
-+	}
-+	return 0;
-+}
-+
-+static int
-+acx_ioctl_set_rates(struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	int result;
-+	u32 brate = 0, orate = 0; /* basic, operational rate set */
-+
-+	FN_ENTER;
-+
-+	log(L_IOCTL, "set_rates %s\n", extra);
-+	result = fill_ratemasks(extra, &brate, &orate,
-+				acx111_supported, acx111_gen_mask, 0);
-+	if (result) goto end;
-+	SET_BIT(orate, brate);
-+	log(L_IOCTL, "brate %08X orate %08X\n", brate, orate);
-+
-+	result = verify_rate(brate, adev->chip_type);
-+	if (result) goto end;
-+	result = verify_rate(orate, adev->chip_type);
-+	if (result) goto end;
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+
-+	adev->rate_basic = brate;
-+	adev->rate_oper = orate;
-+	/* TODO: ideally, we shall monitor highest basic rate
-+	** which was successfully sent to every peer
-+	** (say, last we checked, everybody could hear 5.5 Mbits)
-+	** and use that for bcasts when we want to reach all peers.
-+	** For beacons, we probably shall use lowest basic rate
-+	** because we want to reach all *potential* new peers too */
-+	adev->rate_bcast = 1 << lowest_bit(brate);
-+	if (IS_ACX100(adev))
-+		adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast);
-+	adev->rate_auto = !has_only_one_bit(orate);
-+	acx_l_update_client_rates(adev, orate);
-+	/* TODO: get rid of ratevector, build it only when needed */
-+	acx_l_update_ratevector(adev);
-+
-+	/* Do/don't do tx rate fallback; beacon contents and rate */
-+	SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES);
-+	result = -EINPROGRESS;
-+
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_get_phy_chan_busy_percentage
-+*/
-+static int
-+acx_ioctl_get_phy_chan_busy_percentage(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	struct {
-+		u16 type;
-+		u16 len;
-+		u32 busytime;
-+		u32 totaltime;
-+	} ACX_PACKED usage;
-+	int result;
-+
-+	acx_sem_lock(adev);
-+
-+	if (OK != acx_s_interrogate(adev, &usage, ACX1xx_IE_MEDIUM_USAGE)) {
-+		result = NOT_OK;
-+		goto end_unlock;
-+	}
-+
-+	usage.busytime = le32_to_cpu(usage.busytime);
-+	usage.totaltime = le32_to_cpu(usage.totaltime);
-+	
-+	/* yes, this is supposed to be "Medium" (singular of media),
-+	   not "average"! OK, reword the message to make it obvious... */
-+	printk("%s: busy percentage of medium (since last invocation): %d%% "
-+		"(%u of %u microseconds)\n",
-+		ndev->name,
-+		usage.busytime / ((usage.totaltime / 100) + 1),
-+		usage.busytime, usage.totaltime);
-+
-+	result = OK;
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_ed_threshold
-+*/
-+static inline int
-+acx_ioctl_set_ed_threshold(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	printk("old ED threshold value: %d\n", adev->ed_threshold);
-+	adev->ed_threshold = (unsigned char)*extra;
-+	printk("new ED threshold value: %d\n", (unsigned char)*extra);
-+	SET_BIT(adev->set_mask, GETSET_ED_THRESH);
-+
-+	acx_sem_unlock(adev);
-+
-+	return -EINPROGRESS;
-+}
-+
-+
-+/***********************************************************************
-+** acx_ioctl_set_cca
-+*/
-+static inline int
-+acx_ioctl_set_cca(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	acx_sem_lock(adev);
-+
-+	printk("old CCA value: 0x%02X\n", adev->cca);
-+	adev->cca = (unsigned char)*extra;
-+	printk("new CCA value: 0x%02X\n", (unsigned char)*extra);
-+	SET_BIT(adev->set_mask, GETSET_CCA);
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static const char * const
-+scan_modes[] = { "active", "passive", "background" };
-+
-+static void
-+acx_print_scan_params(acx_device_t *adev, const char* head)
-+{
-+	printk("%s: %smode %d (%s), min chan time %dTU, "
-+		"max chan time %dTU, max scan rate byte: %d\n",
-+		adev->ndev->name, head,
-+		adev->scan_mode, scan_modes[adev->scan_mode],
-+		adev->scan_probe_delay, adev->scan_duration, adev->scan_rate);
-+}
-+
-+static int
-+acx_ioctl_set_scan_params(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+	const int *params = (int *)extra;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_print_scan_params(adev, "old scan parameters: ");
-+	if ((params[0] != -1) && (params[0] >= 0) && (params[0] <= 2))
-+		adev->scan_mode = params[0];
-+	if (params[1] != -1)
-+		adev->scan_probe_delay = params[1];
-+	if (params[2] != -1)
-+		adev->scan_duration = params[2];
-+	if ((params[3] != -1) && (params[3] <= 255))
-+		adev->scan_rate = params[3];
-+	acx_print_scan_params(adev, "new scan parameters: ");
-+	SET_BIT(adev->set_mask, GETSET_RESCAN);
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+static int
-+acx_ioctl_get_scan_params(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+	int *params = (int *)extra;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_print_scan_params(adev, "current scan parameters: ");
-+	params[0] = adev->scan_mode;
-+	params[1] = adev->scan_probe_delay;
-+	params[2] = adev->scan_duration;
-+	params[3] = adev->scan_rate;
-+	result = OK;
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx100_ioctl_set_led_power(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	static const char * const led_modes[] = { "off", "on", "LinkQuality" };
-+
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result;
-+
-+	acx_sem_lock(adev);
-+
-+	printk("%s: power LED status: old %d (%s), ",
-+			ndev->name,
-+			adev->led_power,
-+			led_modes[adev->led_power]);
-+	adev->led_power = extra[0];
-+	if (adev->led_power > 2) adev->led_power = 2;
-+	printk("new %d (%s)\n",
-+			adev->led_power,
-+			led_modes[adev->led_power]);
-+
-+	if (adev->led_power == 2) {
-+		printk("%s: max link quality setting: old %d, ",
-+			ndev->name, adev->brange_max_quality);
-+		if (extra[1])
-+			adev->brange_max_quality = extra[1];
-+		printk("new %d\n", adev->brange_max_quality);
-+	}
-+
-+	SET_BIT(adev->set_mask, GETSET_LED_POWER);
-+
-+	result = -EINPROGRESS;
-+
-+	acx_sem_unlock(adev);
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static inline int
-+acx100_ioctl_get_led_power(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	acx_sem_lock(adev);
-+
-+	extra[0] = adev->led_power;
-+	if (adev->led_power == 2)
-+		extra[1] = adev->brange_max_quality;
-+	else
-+		extra[1] = -1;
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx111_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->param;
-+	if (!IS_PCI(ndev2adev(ndev)))
-+		return OK;
-+	return acx111pci_ioctl_info(ndev, info, vwrq, extra);
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static int
-+acx100_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	union iwreq_data *wrqu,
-+	char *extra)
-+{
-+	struct iw_param *vwrq = &wrqu->param;
-+	if (IS_USB(ndev2adev(ndev))) {
-+		printk("acx: set_phy_amp_bias() is not supported on USB\n");
-+		return OK;
-+	}
-+#ifdef ACX_MEM
-+	return acx100mem_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra);
-+#else
-+	return acx100pci_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra);
-+#endif
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static const iw_handler acx_ioctl_handler[] =
-+{
-+	acx_ioctl_commit,		/* SIOCSIWCOMMIT */
-+	acx_ioctl_get_name,		/* SIOCGIWNAME */
-+	NULL,				/* SIOCSIWNWID */
-+	NULL,				/* SIOCGIWNWID */
-+	acx_ioctl_set_freq,		/* SIOCSIWFREQ */
-+	acx_ioctl_get_freq,		/* SIOCGIWFREQ */
-+	acx_ioctl_set_mode,		/* SIOCSIWMODE */
-+	acx_ioctl_get_mode,		/* SIOCGIWMODE */
-+	acx_ioctl_set_sens,		/* SIOCSIWSENS */
-+	acx_ioctl_get_sens,		/* SIOCGIWSENS */
-+	NULL,				/* SIOCSIWRANGE */
-+	acx_ioctl_get_range,		/* SIOCGIWRANGE */
-+	NULL,				/* SIOCSIWPRIV */
-+	NULL,				/* SIOCGIWPRIV */
-+	NULL,				/* SIOCSIWSTATS */
-+	NULL,				/* SIOCGIWSTATS */
-+#if IW_HANDLER_VERSION > 4
-+	iw_handler_set_spy,		/* SIOCSIWSPY */
-+	iw_handler_get_spy,		/* SIOCGIWSPY */
-+	iw_handler_set_thrspy,		/* SIOCSIWTHRSPY */
-+	iw_handler_get_thrspy,		/* SIOCGIWTHRSPY */
-+#else /* IW_HANDLER_VERSION > 4 */
-+#ifdef WIRELESS_SPY
-+	NULL /* acx_ioctl_set_spy FIXME */,	/* SIOCSIWSPY */
-+	NULL /* acx_ioctl_get_spy */,	/* SIOCGIWSPY */
-+#else /* WSPY */
-+	NULL,				/* SIOCSIWSPY */
-+	NULL,				/* SIOCGIWSPY */
-+#endif /* WSPY */
-+	NULL,				/* [nothing] */
-+	NULL,				/* [nothing] */
-+#endif /* IW_HANDLER_VERSION > 4 */
-+	acx_ioctl_set_ap,		/* SIOCSIWAP */
-+	acx_ioctl_get_ap,		/* SIOCGIWAP */
-+	NULL,				/* [nothing] */
-+	acx_ioctl_get_aplist,		/* SIOCGIWAPLIST */
-+	acx_ioctl_set_scan,		/* SIOCSIWSCAN */
-+	acx_ioctl_get_scan,		/* SIOCGIWSCAN */
-+	acx_ioctl_set_essid,		/* SIOCSIWESSID */
-+	acx_ioctl_get_essid,		/* SIOCGIWESSID */
-+	acx_ioctl_set_nick,		/* SIOCSIWNICKN */
-+	acx_ioctl_get_nick,		/* SIOCGIWNICKN */
-+	NULL,				/* [nothing] */
-+	NULL,				/* [nothing] */
-+	acx_ioctl_set_rate,		/* SIOCSIWRATE */
-+	acx_ioctl_get_rate,		/* SIOCGIWRATE */
-+	acx_ioctl_set_rts,		/* SIOCSIWRTS */
-+	acx_ioctl_get_rts,		/* SIOCGIWRTS */
-+#if ACX_FRAGMENTATION
-+	acx_ioctl_set_frag,		/* SIOCSIWFRAG */
-+	acx_ioctl_get_frag,		/* SIOCGIWFRAG */
-+#else
-+	NULL,				/* SIOCSIWFRAG */
-+	NULL,				/* SIOCGIWFRAG */
-+#endif
-+	acx_ioctl_set_txpow,		/* SIOCSIWTXPOW */
-+	acx_ioctl_get_txpow,		/* SIOCGIWTXPOW */
-+	acx_ioctl_set_retry,		/* SIOCSIWRETRY */
-+	acx_ioctl_get_retry,		/* SIOCGIWRETRY */
-+	acx_ioctl_set_encode,		/* SIOCSIWENCODE */
-+	acx_ioctl_get_encode,		/* SIOCGIWENCODE */
-+	acx_ioctl_set_power,		/* SIOCSIWPOWER */
-+	acx_ioctl_get_power,		/* SIOCGIWPOWER */
-+};
-+
-+
-+/***********************************************************************
-+*/
-+
-+/* if you plan to reorder something, make sure to reorder all other places
-+ * accordingly! */
-+/* SET/GET convention: SETs must have even position, GETs odd */
-+#define ACX100_IOCTL SIOCIWFIRSTPRIV
-+enum {
-+	ACX100_IOCTL_DEBUG = ACX100_IOCTL,
-+	ACX100_IOCTL_GET__________UNUSED1,
-+	ACX100_IOCTL_SET_PLED,
-+	ACX100_IOCTL_GET_PLED,
-+	ACX100_IOCTL_SET_RATES,
-+	ACX100_IOCTL_LIST_DOM,
-+	ACX100_IOCTL_SET_DOM,
-+	ACX100_IOCTL_GET_DOM,
-+	ACX100_IOCTL_SET_SCAN_PARAMS,
-+	ACX100_IOCTL_GET_SCAN_PARAMS,
-+	ACX100_IOCTL_SET_PREAMB,
-+	ACX100_IOCTL_GET_PREAMB,
-+	ACX100_IOCTL_SET_ANT,
-+	ACX100_IOCTL_GET_ANT,
-+	ACX100_IOCTL_RX_ANT,
-+	ACX100_IOCTL_TX_ANT,
-+	ACX100_IOCTL_SET_PHY_AMP_BIAS,
-+	ACX100_IOCTL_GET_PHY_CHAN_BUSY,
-+	ACX100_IOCTL_SET_ED,
-+	ACX100_IOCTL_GET__________UNUSED3,
-+	ACX100_IOCTL_SET_CCA,
-+	ACX100_IOCTL_GET__________UNUSED4,
-+	ACX100_IOCTL_MONITOR,
-+	ACX100_IOCTL_TEST,
-+	ACX100_IOCTL_DBG_SET_MASKS,
-+	ACX111_IOCTL_INFO,
-+	ACX100_IOCTL_DBG_SET_IO,
-+	ACX100_IOCTL_DBG_GET_IO
-+};
-+
-+
-+static const iw_handler acx_ioctl_private_handler[] =
-+{
-+#if ACX_DEBUG
-+[ACX100_IOCTL_DEBUG		- ACX100_IOCTL] = acx_ioctl_set_debug,
-+#endif
-+[ACX100_IOCTL_SET_PLED		- ACX100_IOCTL] = acx100_ioctl_set_led_power,
-+[ACX100_IOCTL_GET_PLED		- ACX100_IOCTL] = acx100_ioctl_get_led_power,
-+[ACX100_IOCTL_SET_RATES		- ACX100_IOCTL] = acx_ioctl_set_rates,
-+[ACX100_IOCTL_LIST_DOM		- ACX100_IOCTL] = acx_ioctl_list_reg_domain,
-+[ACX100_IOCTL_SET_DOM		- ACX100_IOCTL] = acx_ioctl_set_reg_domain,
-+[ACX100_IOCTL_GET_DOM		- ACX100_IOCTL] = acx_ioctl_get_reg_domain,
-+[ACX100_IOCTL_SET_SCAN_PARAMS	- ACX100_IOCTL] = acx_ioctl_set_scan_params,
-+[ACX100_IOCTL_GET_SCAN_PARAMS	- ACX100_IOCTL] = acx_ioctl_get_scan_params,
-+[ACX100_IOCTL_SET_PREAMB	- ACX100_IOCTL] = acx_ioctl_set_short_preamble,
-+[ACX100_IOCTL_GET_PREAMB	- ACX100_IOCTL] = acx_ioctl_get_short_preamble,
-+[ACX100_IOCTL_SET_ANT		- ACX100_IOCTL] = acx_ioctl_set_antenna,
-+[ACX100_IOCTL_GET_ANT		- ACX100_IOCTL] = acx_ioctl_get_antenna,
-+[ACX100_IOCTL_RX_ANT		- ACX100_IOCTL] = acx_ioctl_set_rx_antenna,
-+[ACX100_IOCTL_TX_ANT		- ACX100_IOCTL] = acx_ioctl_set_tx_antenna,
-+[ACX100_IOCTL_SET_PHY_AMP_BIAS	- ACX100_IOCTL] = acx100_ioctl_set_phy_amp_bias,
-+[ACX100_IOCTL_GET_PHY_CHAN_BUSY	- ACX100_IOCTL] = acx_ioctl_get_phy_chan_busy_percentage,
-+[ACX100_IOCTL_SET_ED		- ACX100_IOCTL] = acx_ioctl_set_ed_threshold,
-+[ACX100_IOCTL_SET_CCA		- ACX100_IOCTL] = acx_ioctl_set_cca,
-+[ACX100_IOCTL_MONITOR		- ACX100_IOCTL] = acx_ioctl_wlansniff,
-+[ACX100_IOCTL_TEST		- ACX100_IOCTL] = acx_ioctl_unknown11,
-+[ACX100_IOCTL_DBG_SET_MASKS	- ACX100_IOCTL] = acx_ioctl_dbg_set_masks,
-+[ACX111_IOCTL_INFO		- ACX100_IOCTL] = acx111_ioctl_info,
-+};
-+
-+
-+static const struct iw_priv_args acx_ioctl_private_args[] = {
-+#if ACX_DEBUG
-+{ cmd : ACX100_IOCTL_DEBUG,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetDebug" },
-+#endif
-+{ cmd : ACX100_IOCTL_SET_PLED,
-+	set_args : IW_PRIV_TYPE_BYTE | 2,
-+	get_args : 0,
-+	name : "SetLEDPower" },
-+{ cmd : ACX100_IOCTL_GET_PLED,
-+	set_args : 0,
-+	get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2,
-+	name : "GetLEDPower" },
-+{ cmd : ACX100_IOCTL_SET_RATES,
-+	set_args : IW_PRIV_TYPE_CHAR | 256,
-+	get_args : 0,
-+	name : "SetRates" },
-+{ cmd : ACX100_IOCTL_LIST_DOM,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "ListRegDomain" },
-+{ cmd : ACX100_IOCTL_SET_DOM,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetRegDomain" },
-+{ cmd : ACX100_IOCTL_GET_DOM,
-+	set_args : 0,
-+	get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	name : "GetRegDomain" },
-+{ cmd : ACX100_IOCTL_SET_SCAN_PARAMS,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4,
-+	get_args : 0,
-+	name : "SetScanParams" },
-+{ cmd : ACX100_IOCTL_GET_SCAN_PARAMS,
-+	set_args : 0,
-+	get_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4,
-+	name : "GetScanParams" },
-+{ cmd : ACX100_IOCTL_SET_PREAMB,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetSPreamble" },
-+{ cmd : ACX100_IOCTL_GET_PREAMB,
-+	set_args : 0,
-+	get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	name : "GetSPreamble" },
-+{ cmd : ACX100_IOCTL_SET_ANT,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetAntenna" },
-+{ cmd : ACX100_IOCTL_GET_ANT,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "GetAntenna" },
-+{ cmd : ACX100_IOCTL_RX_ANT,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetRxAnt" },
-+{ cmd : ACX100_IOCTL_TX_ANT,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetTxAnt" },
-+{ cmd : ACX100_IOCTL_SET_PHY_AMP_BIAS,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetPhyAmpBias"},
-+{ cmd : ACX100_IOCTL_GET_PHY_CHAN_BUSY,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "GetPhyChanBusy" },
-+{ cmd : ACX100_IOCTL_SET_ED,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetED" },
-+{ cmd : ACX100_IOCTL_SET_CCA,
-+	set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
-+	get_args : 0,
-+	name : "SetCCA" },
-+{ cmd : ACX100_IOCTL_MONITOR,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2,
-+	get_args : 0,
-+	name : "monitor" },
-+{ cmd : ACX100_IOCTL_TEST,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "Test" },
-+{ cmd : ACX100_IOCTL_DBG_SET_MASKS,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2,
-+	get_args : 0,
-+	name : "DbgSetMasks" },
-+{ cmd : ACX111_IOCTL_INFO,
-+	set_args : 0,
-+	get_args : 0,
-+	name : "GetAcx111Info" },
-+{ cmd : ACX100_IOCTL_DBG_SET_IO,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4,
-+	get_args : 0,
-+	name : "DbgSetIO" },
-+{ cmd : ACX100_IOCTL_DBG_GET_IO,
-+	set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3,
-+	get_args : 0,
-+	name : "DbgGetIO" },
-+};
-+
-+
-+const struct iw_handler_def acx_ioctl_handler_def =
-+{
-+	.num_standard = VEC_SIZE(acx_ioctl_handler),
-+	.num_private = VEC_SIZE(acx_ioctl_private_handler),
-+	.num_private_args = VEC_SIZE(acx_ioctl_private_args),
-+	.standard = (iw_handler *) acx_ioctl_handler,
-+	.private = (iw_handler *) acx_ioctl_private_handler,
-+	.private_args = (struct iw_priv_args *) acx_ioctl_private_args,
-+#if IW_HANDLER_VERSION > 5
-+	.get_wireless_stats = acx_e_get_wireless_stats
-+#endif /* IW > 5 */
-+};
-Index: linux-2.6.23/drivers/net/wireless/acx/Kconfig
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/Kconfig	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,113 @@
-+config ACX
-+	tristate "TI acx100/acx111 802.11b/g wireless chipsets"
-+	depends on NET_RADIO && EXPERIMENTAL
-+	select FW_LOADER
-+	---help---
-+	A driver for 802.11b/g wireless cards based on
-+	Texas Instruments acx100 and acx111 chipsets.
-+
-+	This driver supports Host AP mode that allows
-+	your computer to act as an IEEE 802.11 access point.
-+	This driver is new and experimental.
-+
-+	Texas Instruments did not take part in development of this driver
-+	in any way, shape or form.
-+
-+	The driver can be compiled as a module and will be named "acx".
-+
-+config ACX_PCI
-+	bool "TI acx100/acx111 802.11b/g PCI"
-+	depends on ACX && PCI
-+	---help---
-+	Include PCI and CardBus support in acx.
-+
-+	acx chipsets need their firmware loaded at startup.
-+	You will need to provide a firmware image via hotplug.
-+
-+	Firmware may be in a form of single image 40-100kb in size
-+	(a 'combined' firmware) or two images - main image
-+	(again 40-100kb) and radio image (~10kb or less).
-+
-+	Firmware images are requested from hotplug using following names:
-+
-+	tiacx100 - main firmware image for acx100 chipset
-+	tiacx100rNN - radio acx100 firmware for radio type NN
-+	tiacx100cNN - combined acx100 firmware for radio type NN
-+	tiacx111 - main acx111 firmware
-+	tiacx111rNN - radio acx111 firmware for radio type NN
-+	tiacx111cNN - combined acx111 firmware for radio type NN
-+
-+	Driver will attempt to load combined image first.
-+	If no such image is found, it will try to load main image
-+	and radio image instead.
-+
-+	Firmware files are not covered by GPL and are not distributed
-+	with this driver for legal reasons.
-+
-+config ACX_USB
-+	bool "TI acx100/acx111 802.11b/g USB"
-+	depends on ACX && (USB=y || USB=ACX)
-+	---help---
-+	Include USB support in acx.
-+
-+	There is only one currently known device in this category,
-+	D-Link DWL-120+, but newer devices seem to be on the horizon.
-+
-+	acx chipsets need their firmware loaded at startup.
-+	You will need to provide a firmware image via hotplug.
-+
-+	Firmware for USB device is requested from hotplug
-+	by the 'tiacx100usb' name.
-+
-+	Firmware files are not covered by GPL and are not distributed
-+	with this driver for legal reasons.
-+
-+config ACX_MEM
-+	bool "TI acx100/acx111 802.11b/g memory mapped slave 16 interface"
-+	depends on ACX
-+	---help---
-+	acx chipsets need their firmware loaded at startup.
-+	You will need to provide a firmware image via hotplug.
-+
-+	Firmware for USB device is requested from hotplug
-+	by the 'tiacx100usb' name.
-+
-+	Firmware files are not covered by GPL and are not distributed
-+	with this driver for legal reasons.
-+
-+config ACX_CS
-+	bool "TI acx100/acx111 802.11b/g cardbus interface"
-+	depends on ACX
-+	---help---
-+	acx chipsets need their firmware loaded at startup.
-+	You will need to provide a firmware image via hotplug.
-+	
-+	This driver is based on memory mapped driver.
-+
-+	Firmware files are not covered by GPL and are not distributed
-+	with this driver for legal reasons.
-+
-+config ACX_HX4700
-+	tristate "ACX support for the iPAQ hx4700 using ACX_MEM"
-+	depends on HX4700_CORE && ACX_MEM
-+	---help---
-+	Include memory interface support in acx for the iPAQ hx4700.
-+
-+config ACX_HTCUNIVERSAL
-+	tristate "ACX support for the HTC Universal using ACX_MEM"
-+	depends on HTCUNIVERSAL_CORE && HTC_ASIC3 && ACX_MEM
-+	---help---
-+	Include memory interface support in acx for the HTC Universal.
-+
-+config ACX_HTCSABLE
-+	tristate "ACX support for the HTC Sable (IPAQ hw6915) using ACX_MEM"
-+	depends on MACH_HW6900 && HTC_ASIC3 && ACX_MEM
-+	---help---
-+	Include memory interface support in acx for the HTC Sable (IPAQ hw6915).
-+
-+config ACX_RX3000
-+	tristate "ACX support for the iPAQ RX3000 using ACX_MEM"
-+	depends on MACH_RX3715 && ACX_MEM && LEDS_ASIC3
-+	---help---
-+	Include memory interface support in acx for the IPAQ RX3000.
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/Makefile
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/Makefile	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,21 @@
-+#obj-m += acx.o
-+
-+#acx-obj-y += pci.o
-+#acx-obj-y += usb.o
-+
-+#acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y)
-+
-+# Use this if you have proper Kconfig integration:
-+
-+obj-$(CONFIG_ACX) += acx.o
-+obj-$(CONFIG_ACX_HX4700) += hx4700_acx.o
-+obj-$(CONFIG_ACX_HTCUNIVERSAL) += htcuniversal_acx.o
-+obj-$(CONFIG_ACX_HTCSABLE) += htcsable_acx.o
-+obj-$(CONFIG_ACX_RX3000) += rx3000_acx.o
-+#
-+acx-obj-$(CONFIG_ACX_PCI) += pci.o
-+acx-obj-$(CONFIG_ACX_USB) += usb.o
-+acx-obj-$(CONFIG_ACX_MEM) += mem.o
-+acx-obj-$(CONFIG_ACX_CS) += cs.o
-+#
-+acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y)
-Index: linux-2.6.23/drivers/net/wireless/acx/mem.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/mem.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,5363 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+**
-+** Slave memory interface support:
-+**
-+** Todd Blumer - SDG Systems
-+** Bill Reese - HP
-+** Eric McCorkle - Shadowsun
-+*/
-+#define ACX_MEM 1
-+
-+/*
-+ * non-zero makes it dump the ACX memory to the console then
-+ * panic when you cat /proc/driver/acx_wlan0_diag
-+ */
-+#define DUMP_MEM_DEFINED 1
-+
-+#define DUMP_MEM_DURING_DIAG 0
-+#define DUMP_IF_SLOW 0
-+
-+#define PATCH_AROUND_BAD_SPOTS 1
-+#define HX4700_FIRMWARE_CHECKSUM 0x0036862e
-+#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+
-+/* Linux 2.6.18+ uses <linux/utsrelease.h> */
-+#ifndef UTS_RELEASE
-+#include <linux/utsrelease.h>
-+#endif
-+
-+#include <linux/compiler.h> /* required for Lx 2.6.8 ?? */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/skbuff.h>
-+#include <linux/slab.h>
-+#include <linux/if_arp.h>
-+#include <linux/irq.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+#include <linux/netdevice.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm.h>
-+#include <linux/vmalloc.h>
-+#include <linux/delay.h>
-+#include <linux/workqueue.h>
-+#include <linux/inetdevice.h>
-+
-+#include "acx.h"
-+#include "acx_hw.h"
-+
-+/***********************************************************************
-+*/
-+
-+#define CARD_EEPROM_ID_SIZE 6
-+
-+#include <asm/io.h>
-+
-+#define REG_ACX_VENDOR_ID 0x900
-+/*
-+ * This is the vendor id on the HX4700, anyway
-+ */
-+#define ACX_VENDOR_ID 0x8400104c
-+
-+typedef enum {
-+	ACX_SOFT_RESET = 0,
-+
-+	ACX_SLV_REG_ADDR,
-+	ACX_SLV_REG_DATA,
-+	ACX_SLV_REG_ADATA,
-+
-+	ACX_SLV_MEM_CP,
-+	ACX_SLV_MEM_ADDR,
-+	ACX_SLV_MEM_DATA,
-+	ACX_SLV_MEM_CTL,
-+} acxreg_t;
-+
-+/***********************************************************************
-+*/
-+static void acxmem_i_tx_timeout(struct net_device *ndev);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id);
-+#else
-+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+#endif
-+static void acxmem_i_set_multicast_list(struct net_device *ndev);
-+
-+static int acxmem_e_open(struct net_device *ndev);
-+static int acxmem_e_close(struct net_device *ndev);
-+static void acxmem_s_up(struct net_device *ndev);
-+static void acxmem_s_down(struct net_device *ndev);
-+
-+static void dump_acxmem (acx_device_t *adev, u32 start, int length);
-+static int acxmem_complete_hw_reset (acx_device_t *adev);
-+static void acxmem_s_delete_dma_regions(acx_device_t *adev);
-+
-+static struct platform_device *resume_pdev;
-+
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxmem_e_suspend(struct platform_device *pdev, pm_message_t state);
-+#else
-+acxmem_e_suspend(struct device *pdev, u32 state);
-+#endif
-+static void
-+fw_resumer(struct work_struct *notused);
-+//fw_resumer( void *data );
-+
-+static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
-+{
-+  struct net_device *ndev = ptr;
-+  acx_device_t *adev = ndev2adev(ndev);
-+
-+  /*
-+   * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes.
-+   */
-+
-+  if (NETDEV_CHANGEADDR == event) {
-+    /*
-+     * the upper layers put the new MAC address in ndev->dev_addr; we just copy
-+     * it over and update the ACX with it.
-+     */
-+    MAC_COPY(adev->dev_addr, adev->ndev->dev_addr);
-+    adev->set_mask |= GETSET_STATION_ID;
-+    acx_s_update_card_settings (adev);
-+  }
-+
-+  return 0;
-+}
-+
-+static struct notifier_block acx_netdev_notifier = {
-+        .notifier_call = acx_netdev_event,
-+};
-+
-+/***********************************************************************
-+** Register access
-+*/
-+
-+/* Pick one */
-+/* #define INLINE_IO static */
-+#define INLINE_IO static inline
-+
-+INLINE_IO u32
-+read_id_register (acx_device_t *adev)
-+{
-+  writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]);
-+  return readl (&adev->iobase[ACX_SLV_REG_DATA]);
-+}
-+
-+INLINE_IO u32
-+read_reg32(acx_device_t *adev, unsigned int offset)
-+{
-+        u32 val;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	  return readl(((u8*)adev->iobase) + addr);
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	val = readl( &adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return val;
-+}
-+
-+INLINE_IO u16
-+read_reg16(acx_device_t *adev, unsigned int offset)
-+{
-+	u16 lo;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    return readw(((u8 *) adev->iobase) + addr);
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return lo;
-+}
-+
-+INLINE_IO u8
-+read_reg8(acx_device_t *adev, unsigned int offset)
-+{
-+	u8 lo;
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20)
-+	    return readb(((u8 *)adev->iobase) + addr);
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+
-+	return (u8)lo;
-+}
-+
-+INLINE_IO void
-+write_reg32(acx_device_t *adev, unsigned int offset, u32 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writel(val, ((u8*)adev->iobase) + addr);
-+	    return;
-+	}
-+
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writel( val, &adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+INLINE_IO void
-+write_reg16(acx_device_t *adev, unsigned int offset, u16 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writew(val, ((u8 *)adev->iobase) + addr);
-+	    return;
-+	}
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+INLINE_IO void
-+write_reg8(acx_device_t *adev, unsigned int offset, u8 val)
-+{
-+	u32 addr;
-+
-+        if (offset > IO_ACX_ECPU_CTRL)
-+	  addr = offset;
-+	else
-+	  addr = adev->io[offset];
-+
-+	if (addr < 0x20) {
-+	    writeb(val, ((u8 *) adev->iobase) + addr);
-+	    return;
-+	}
-+	writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] );
-+	writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] );
-+}
-+
-+/* Handle PCI posting properly:
-+ * Make sure that writes reach the adapter in case they require to be executed
-+ * *before* the next write, by reading a random (and safely accessible) register.
-+ * This call has to be made if there is no read following (which would flush the data
-+ * to the adapter), yet the written data has to reach the adapter immediately. */
-+INLINE_IO void
-+write_flush(acx_device_t *adev)
-+{
-+	/* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */
-+	/* faster version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should also be safe): */
-+	(void) readl(adev->iobase);
-+}
-+
-+INLINE_IO void
-+set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) {
-+  u32 tmp;
-+
-+  tmp = read_reg32 (adev, offset);
-+  tmp = tmp | bits;
-+  write_reg32 (adev, offset, tmp);
-+  write_flush (adev);
-+}
-+
-+INLINE_IO void
-+clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) {
-+  u32 tmp;
-+
-+  tmp = read_reg32 (adev, offset);
-+  tmp = tmp & ~bits;
-+  write_reg32 (adev, offset, tmp);
-+  write_flush (adev);
-+}
-+
-+/*
-+ * Copy from PXA memory to the ACX memory.  This assumes both the PXA and ACX
-+ * addresses are 32 bit aligned.  Count is in bytes.
-+ */
-+INLINE_IO void
-+write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val)
-+{
-+  write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address);
-+  udelay (10);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val);
-+}
-+
-+INLINE_IO u32
-+read_slavemem32 (acx_device_t *adev, u32 slave_address)
-+{
-+  u32 val;
-+
-+  write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0);
-+  write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address);
-+  udelay (10);
-+  val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+
-+  return val;
-+}
-+
-+INLINE_IO void
-+write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val)
-+{
-+  u32 data;
-+  u32 base;
-+  int offset;
-+
-+  /*
-+   * Get the word containing the target address and the byte offset in that word.
-+   */
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+  data &= ~(0xff << offset);
-+  data |= val << offset;
-+  write_slavemem32 (adev, base, data);
-+}
-+
-+INLINE_IO u8
-+read_slavemem8 (acx_device_t *adev, u32 slave_address)
-+{
-+  u8 val;
-+  u32 base;
-+  u32 data;
-+  int offset;
-+
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+ 
-+  val = (data >> offset) & 0xff;
-+
-+  return val;
-+}
-+
-+/*
-+ * doesn't split across word boundaries
-+ */
-+INLINE_IO void
-+write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val)
-+{
-+  u32 data;
-+  u32 base;
-+  int offset;
-+
-+  /*
-+   * Get the word containing the target address and the byte offset in that word.
-+   */
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+  data &= ~(0xffff << offset);
-+  data |= val << offset;
-+  write_slavemem32 (adev, base, data);
-+}
-+
-+/*
-+ * doesn't split across word boundaries
-+ */
-+INLINE_IO u16
-+read_slavemem16 (acx_device_t *adev, u32 slave_address)
-+{
-+  u16 val;
-+  u32 base;
-+  u32 data;
-+  int offset;
-+
-+  base = slave_address & ~3;
-+  offset = (slave_address & 3) * 8;
-+
-+  data = read_slavemem32 (adev, base);
-+ 
-+  val = (data >> offset) & 0xffff;
-+
-+  return val;
-+}
-+
-+/*
-+ * Copy from slave memory
-+ *
-+ * TODO - rewrite using address autoincrement, handle partial words
-+ */
-+void
-+copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) {
-+  u32 tmp = 0;
-+  u8 *ptmp = (u8 *) &tmp;
-+
-+  /*
-+   * Right now I'm making the assumption that the destination is aligned, but
-+   * I'd better check.
-+   */
-+  if ((u32) destination & 3) {
-+    printk ("acx copy_from_slavemem: warning!  destination not word-aligned!\n");
-+  }
-+
-+  while (count >= 4) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source);
-+    udelay (10);
-+    *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    count -= 4;
-+    source += 4;
-+    destination += 4;
-+  }
-+
-+  /*
-+   * If the word reads above didn't satisfy the count, read one more word
-+   * and transfer a byte at a time until the request is satisfied.
-+   */
-+  if (count) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source);
-+    udelay (10);
-+    tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    while (count--) {
-+      *destination++ = *ptmp++;
-+    }
-+  }
-+}
-+
-+/*
-+ * Copy to slave memory
-+ *
-+ * TODO - rewrite using autoincrement, handle partial words
-+ */
-+void
-+copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count)
-+{
-+  u32 tmp = 0;
-+  u8* ptmp = (u8 *) &tmp;
-+  static u8 src[512];	/* make static to avoid huge stack objects */
-+
-+  /*
-+   * For now, make sure the source is word-aligned by copying it to a word-aligned
-+   * buffer.  Someday rewrite to avoid the extra copy.
-+   */
-+  if (count > sizeof (src)) {
-+    printk ("acx copy_to_slavemem: Warning! buffer overflow!\n");
-+    count = sizeof (src);
-+  }
-+  memcpy (src, source, count);
-+  source = src;
-+
-+  while (count >= 4) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source));
-+    count -= 4;
-+    source += 4;
-+    destination += 4;
-+  }
-+
-+  /*
-+   * If there are leftovers read the next word from the acx and merge in
-+   * what they want to write.
-+   */
-+  if (count) {
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA);
-+    while (count--) {
-+      *ptmp++ = *source++;
-+    }
-+    /*
-+     * reset address in case we're currently in auto-increment mode
-+     */
-+    write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination);
-+    udelay (10);
-+    write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp);
-+    udelay (10);
-+  }
-+  
-+}
-+
-+/*
-+ * Block copy to slave buffers using memory block chain mode.  Copies to the ACX
-+ * transmit buffer structure with minimal intervention on our part.
-+ * Interrupts should be disabled when calling this.
-+ */
-+void
-+chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count)
-+{
-+  u32 val;
-+  u32 *data = (u32 *) source;
-+  static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS];
-+
-+  /*
-+   * Warn if the pointers don't look right.  Destination must fit in [23:5] with
-+   * zero elsewhere and source should be 32 bit aligned.
-+   * This should never happen since we're in control of both, but I want to know about
-+   * it if it does.
-+   */
-+  if ((destination & 0x00ffffe0) != destination) {
-+    printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination);
-+  }
-+  if (count > sizeof aligned_source) {
-+      printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" );
-+      count = sizeof aligned_source;
-+  }
-+  if ((u32) source & 3) {
-+    memcpy (aligned_source, source, count);
-+    data = (u32 *) aligned_source;
-+  }
-+
-+  /*
-+   * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment
-+   * SLV_MEM_CTL[5:2] = offset to data portion = 1 word
-+   */
-+  val = 2 << 16 | 1 << 2;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CTL]);
-+
-+  /*
-+   * SLV_MEM_CP[23:5] = start of 1st block
-+   * SLV_MEM_CP[3:2] = offset to memblkptr = 0
-+   */
-+  val = destination & 0x00ffffe0;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CP]);
-+
-+  /*
-+   * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5]
-+   */
-+  val = (destination & 0x00ffffe0) + (1<<2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]);
-+
-+  /*
-+   * Write the data to the slave data register, rounding up to the end
-+   * of the word containing the last byte (hence the > 0)
-+   */
-+  while (count > 0) {
-+    writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]);
-+    count -= 4;
-+  }
-+}
-+
-+
-+/*
-+ * Block copy from slave buffers using memory block chain mode.  Copies from the ACX
-+ * receive buffer structures with minimal intervention on our part.
-+ * Interrupts should be disabled when calling this.
-+ */
-+void
-+chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count)
-+{
-+  u32 val;
-+  u32 *data = (u32 *) destination;
-+  static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS];
-+  int saved_count = count;
-+
-+  /*
-+   * Warn if the pointers don't look right.  Destination must fit in [23:5] with
-+   * zero elsewhere and source should be 32 bit aligned.
-+   * Turns out the network stack sends unaligned things, so fix them before
-+   * copying to the ACX.
-+   */
-+  if ((source & 0x00ffffe0) != source) {
-+    printk ("acx chaincopy: source block 0x%04x not aligned!\n", source);
-+    dump_acxmem (adev, 0, 0x10000);
-+  }
-+  if ((u32) destination & 3) {
-+    //printk ("acx chaincopy: data destination not word aligned!\n");
-+    data = (u32 *) aligned_destination;
-+    if (count > sizeof aligned_destination) {
-+	printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" );
-+	count = sizeof aligned_destination;
-+    }
-+  }
-+
-+  /*
-+   * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment
-+   * SLV_MEM_CTL[5:2] = offset to data portion = 1 word
-+   */
-+  val = (2 << 16) | (1 << 2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CTL]);
-+
-+  /*
-+   * SLV_MEM_CP[23:5] = start of 1st block
-+   * SLV_MEM_CP[3:2] = offset to memblkptr = 0
-+   */
-+  val = source & 0x00ffffe0;
-+  writel (val, &adev->iobase[ACX_SLV_MEM_CP]);
-+
-+  /*
-+   * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5]
-+   */
-+  val = (source & 0x00ffffe0) + (1<<2);
-+  writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]);
-+
-+  /*
-+   * Read the data from the slave data register, rounding up to the end
-+   * of the word containing the last byte (hence the > 0)
-+   */
-+  while (count > 0) {
-+    *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]);
-+    count -= 4;
-+  }
-+
-+  /*
-+   * If the destination wasn't aligned, we would have saved it in
-+   * the aligned buffer, so copy it where it should go.
-+   */
-+  if ((u32) destination & 3) {
-+    memcpy (destination, aligned_destination, saved_count);
-+  }
-+}
-+
-+char
-+printable (char c) 
-+{
-+  return ((c >= 20) && (c < 127)) ? c : '.';
-+}
-+
-+#if DUMP_MEM_DEFINED > 0
-+static void
-+dump_acxmem (acx_device_t *adev, u32 start, int length)
-+{
-+  int i;
-+  u8 buf[16];
-+
-+  while (length > 0) {
-+    printk ("%04x ", start);
-+    copy_from_slavemem (adev, buf, start, 16);
-+    for (i = 0; (i < 16) && (i < length); i++) {
-+      printk ("%02x ", buf[i]);
-+    }
-+    for (i = 0; (i < 16) && (i < length); i++) {
-+      printk ("%c", printable (buf[i]));
-+    }
-+    printk ("\n");
-+    start += 16;
-+    length -= 16;
-+  }
-+}
-+#endif
-+
-+static void
-+enable_acx_irq(acx_device_t *adev);
-+static void
-+disable_acx_irq(acx_device_t *adev);
-+
-+/*
-+ * Return an acx pointer to the next transmit data block.
-+ */
-+u32
-+allocate_acx_txbuf_space (acx_device_t *adev, int count) {
-+  u32 block, next, last_block;
-+  int blocks_needed;
-+  unsigned long flags;
-+
-+  spin_lock_irqsave(&adev->txbuf_lock, flags);
-+  /*
-+   * Take 4 off the memory block size to account for the reserved word at the start of
-+   * the block.
-+   */
-+  blocks_needed = count / (adev->memblocksize - 4);
-+  if (count % (adev->memblocksize - 4))
-+    blocks_needed++;
-+
-+  if (blocks_needed <= adev->acx_txbuf_blocks_free) {
-+    /*
-+     * Take blocks at the head of the free list.
-+     */
-+    last_block = block = adev->acx_txbuf_free;
-+
-+    /*
-+     * Follow block pointers through the requested number of blocks both to
-+     * find the new head of the free list and to set the flags for the blocks
-+     * appropriately.
-+     */
-+    while (blocks_needed--) {
-+      /*
-+       * Keep track of the last block of the allocation
-+       */
-+      last_block = adev->acx_txbuf_free;
-+
-+      /*
-+       * Make sure the end control flag is not set.
-+       */
-+      next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff;
-+      write_slavemem32 (adev, adev->acx_txbuf_free, next);
-+
-+      /*
-+       * Update the new head of the free list
-+       */
-+      adev->acx_txbuf_free = next << 5;
-+      adev->acx_txbuf_blocks_free--;
-+
-+    }
-+
-+    /*
-+     * Flag the last block both by clearing out the next pointer
-+     * and marking the control field.
-+     */
-+    write_slavemem32 (adev, last_block, 0x02000000);
-+
-+    /*
-+     * If we're out of buffers make sure the free list pointer is NULL
-+     */
-+    if (!adev->acx_txbuf_blocks_free) {
-+      adev->acx_txbuf_free = 0;
-+    }
-+  }
-+  else {
-+    block = 0;
-+  }
-+  spin_unlock_irqrestore (&adev->txbuf_lock, flags);
-+  return block;
-+}
-+
-+/*
-+ * Return buffer space back to the pool by following the next pointers until we find
-+ * the block marked as the end.  Point the last block to the head of the free list,
-+ * then update the head of the free list to point to the newly freed memory.
-+ * This routine gets called in interrupt context, so it shouldn't block to protect
-+ * the integrity of the linked list.  The ISR already holds the lock.
-+ */
-+void
-+reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) {
-+  u32 cur, last, next;
-+  unsigned long flags;
-+
-+  spin_lock_irqsave (&adev->txbuf_lock, flags);
-+  if ((blockptr >= adev->acx_txbuf_start) &&
-+      (blockptr <= adev->acx_txbuf_start +
-+       (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) {
-+    cur = blockptr;
-+    do {
-+      last = cur;
-+      next = read_slavemem32 (adev, cur);
-+      
-+      /*
-+       * Advance to the next block in this allocation
-+       */
-+      cur = (next & 0x7ffff) << 5;
-+      
-+      /*
-+       * This block now counts as free.
-+       */
-+      adev->acx_txbuf_blocks_free++;
-+    } while (!(next & 0x02000000));
-+    
-+    /*
-+     * last now points to the last block of that allocation.  Update the pointer
-+     * in that block to point to the free list and reset the free list to the
-+     * first block of the free call.  If there were no free blocks, make sure
-+     * the new end of the list marks itself as truly the end.
-+     */
-+    if (adev->acx_txbuf_free) {
-+      write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5);
-+    }
-+    else {
-+      write_slavemem32 (adev, last, 0x02000000);
-+    }
-+    adev->acx_txbuf_free = blockptr;
-+  } 
-+  spin_unlock_irqrestore(&adev->txbuf_lock, flags);
-+}
-+
-+/*
-+ * Initialize the pieces managing the transmit buffer pool on the ACX.  The transmit
-+ * buffer is a circular queue with one 32 bit word reserved at the beginning of each
-+ * block.  The upper 13 bits are a control field, of which only 0x02000000 has any
-+ * meaning.  The lower 19 bits are the address of the next block divided by 32.
-+ */
-+void
-+init_acx_txbuf (acx_device_t *adev) {
-+  
-+  /*
-+   * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us.
-+   * All we need to do is reset the rest of the bookeeping.
-+   */
-+  
-+  adev->acx_txbuf_free = adev->acx_txbuf_start;
-+  adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks;
-+  
-+  /*
-+   * Initialization leaves the last transmit pool block without a pointer back to
-+   * the head of the list, but marked as the end of the list.  That's how we want
-+   * to see it, too, so leave it alone.  This is only ever called after a firmware
-+   * reset, so the ACX memory is in the state we want.
-+   */
-+	
-+}
-+
-+INLINE_IO int
-+adev_present(acx_device_t *adev)
-+{
-+	/* fast version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should be safe): */
-+	return readl(adev->iobase) != 0xffffffff;
-+}
-+
-+/***********************************************************************
-+*/
-+static inline txdesc_t*
-+get_txdesc(acx_device_t *adev, int index)
-+{
-+	return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size);
-+}
-+
-+static inline txdesc_t*
-+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc)
-+{
-+	return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size);
-+}
-+
-+static txhostdesc_t*
-+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return &adev->txhostdesc_start[index*2];
-+}
-+
-+static inline client_t*
-+get_txc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return adev->txc[index];
-+}
-+
-+static inline u16
-+get_txr(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	index /= adev->txdesc_size;
-+	return adev->txr[index];
-+}
-+
-+static inline void
-+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	adev->txc[index] = c;
-+	adev->txr[index] = r111;
-+}
-+
-+
-+/***********************************************************************
-+** EEPROM and PHY read/write helpers
-+*/
-+/***********************************************************************
-+** acxmem_read_eeprom_byte
-+**
-+** Function called to read an octet in the EEPROM.
-+**
-+** This function is used by acxmem_e_probe to check if the
-+** connected card is a legal one or not.
-+**
-+** Arguments:
-+**	adev		ptr to acx_device structure
-+**	addr		address to read in the EEPROM
-+**	charbuf		ptr to a char. This is where the read octet
-+**			will be stored
-+*/
-+int
-+acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf)
-+{
-+	int result;
-+	int count;
-+
-+	write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+	write_reg32(adev, IO_ACX_EEPROM_ADDR, addr);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for EEPROM read\n",
-+							adev->ndev->name);
-+			result = NOT_OK;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	*charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA);
-+	log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf);
-+	result = OK;
-+
-+fail:
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** We don't lock hw accesses here since we never r/w eeprom in IRQ
-+** Note: this function sleeps only because of GFP_KERNEL alloc
-+*/
-+#ifdef UNUSED
-+int
-+acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf)
-+{
-+	u8 *data_verify = NULL;
-+	unsigned long flags;
-+	int count, i;
-+	int result = NOT_OK;
-+	u16 gpio_orig;
-+
-+	printk("acx: WARNING! I would write to EEPROM now. "
-+		"Since I really DON'T want to unless you know "
-+		"what you're doing (THIS CODE WILL PROBABLY "
-+		"NOT WORK YET!), I will abort that now. And "
-+		"definitely make sure to make a "
-+		"/proc/driver/acx_wlan0_eeprom backup copy first!!! "
-+		"(the EEPROM content includes the PCI config header!! "
-+		"If you kill important stuff, then you WILL "
-+		"get in trouble and people DID get in trouble already)\n");
-+	return OK;
-+
-+	FN_ENTER;
-+
-+	data_verify = kmalloc(len, GFP_KERNEL);
-+	if (!data_verify) {
-+		goto end;
-+	}
-+
-+	/* first we need to enable the OE (EEPROM Output Enable) GPIO line
-+	 * to be able to write to the EEPROM.
-+	 * NOTE: an EEPROM writing success has been reported,
-+	 * but you probably have to modify GPIO_OUT, too,
-+	 * and you probably need to activate a different GPIO
-+	 * line instead! */
-+	gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE);
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1);
-+	write_flush(adev);
-+
-+	/* ok, now start writing the data out */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i));
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 1);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("WARNING, DANGER!!! "
-+					"Timeout waiting for EEPROM write\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+	}
-+
-+	/* disable EEPROM writing */
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig);
-+	write_flush(adev);
-+
-+	/* now start a verification run */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("timeout waiting for EEPROM read\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+
-+		data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA);
-+	}
-+
-+	if (0 == memcmp(charbuf, data_verify, len))
-+		result = OK; /* read data matches, success */
-+
-+end:
-+	kfree(data_verify);
-+	FN_EXIT1(result);
-+	return result;
-+}
-+#endif /* UNUSED */
-+
-+
-+/***********************************************************************
-+** acxmem_s_read_phy_reg
-+**
-+** Messing with rx/tx disabling and enabling here
-+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic
-+*/
-+int
-+acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	int result = NOT_OK;
-+	int count;
-+
-+	FN_ENTER;
-+
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			*charbuf = 0;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "count was %u\n", count);
-+	*charbuf = read_reg8(adev, IO_ACX_PHY_DATA);
-+
-+	log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg);
-+	result = OK;
-+	goto fail; /* silence compiler warning */
-+fail:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+        int count;
-+	FN_ENTER;
-+
-+	/* mprusko said that 32bit accesses result in distorted sensitivity
-+	 * on his card. Unconfirmed, looks like it's not true (most likely since we
-+	 * now properly flush writes). */
-+	write_reg32(adev, IO_ACX_PHY_DATA, value);
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 1);
-+	write_flush(adev);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg);
-+ fail:
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+#define NO_AUTO_INCREMENT	1
-+
-+/***********************************************************************
-+** acxmem_s_write_fw
-+**
-+** Write the firmware image into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	1	firmware image corrupted
-+**	0	success
-+*/
-+static int
-+acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset)
-+{
-+	int len, size, checkMismatch = -1;
-+	u32 sum, v32, tmp, id;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+	write_flush(adev);
-+#endif
-+#endif
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		sum += p[0]+p[1]+p[2]+p[3];
-+		p += 4;
-+		len += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT 
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+		write_flush(adev);
-+#endif
-+		write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32);
-+		write_flush(adev);
-+#endif
-+		write_slavemem32 (adev, offset + len - 4, v32);
-+
-+		id = read_id_register (adev);
-+		
-+		/*
-+		 * check the data written
-+		 */
-+		tmp = read_slavemem32 (adev, offset + len - 4);
-+		if (checkMismatch && (tmp != v32)) {
-+		  printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n",
-+			  offset + len - 4, v32, tmp, id);
-+		  checkMismatch = 0;
-+		}
-+	}
-+	log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n",
-+			size, sum, le32_to_cpu(fw_image->chksum));
-+
-+	/* compare our checksum with the stored image checksum */
-+	return (sum != le32_to_cpu(fw_image->chksum));
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_validate_fw
-+**
-+** Compare the firmware image given with
-+** the firmware image written into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	NOT_OK	firmware image corrupted or not correctly written
-+**	OK	success
-+*/
-+static int
-+acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image,
-+				u32 offset)
-+{
-+	u32 sum, v32, w32;
-+	int len, size;
-+	int result = OK;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+	write_reg32(adev, IO_ACX_SLV_END_CTL, 0);
-+
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+#endif
-+
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		p += 4;
-+		len += 4;
-+
-+#ifdef NOPE
-+#if NO_AUTO_INCREMENT
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+#endif
-+		udelay(10);
-+		w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA);
-+#endif
-+		w32 = read_slavemem32 (adev, offset + len - 4);
-+
-+		if (unlikely(w32 != v32)) {
-+			printk("acx: FATAL: firmware upload: "
-+			"data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n"
-+			"I/O timing issues or defective memory, with DWL-xx0+? "
-+			"ACX_IO_WIDTH=16 may help. Please report\n",
-+				len, v32, w32);
-+			result = NOT_OK;
-+			break;
-+		}
-+
-+		sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24);
-+	}
-+
-+	/* sum control verification */
-+	if (result != NOT_OK) {
-+		if (sum != le32_to_cpu(fw_image->chksum)) {
-+			printk("acx: FATAL: firmware upload: "
-+				"checksums don't match!\n");
-+			result = NOT_OK;
-+		}
-+	}
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_upload_fw
-+**
-+** Called from acx_reset_dev
-+*/
-+static int
-+acxmem_s_upload_fw(acx_device_t *adev)
-+{
-+	firmware_image_t *fw_image = NULL;
-+	int res = NOT_OK;
-+	int try;
-+	u32 file_size;
-+	char *filename = "WLANGEN.BIN";
-+#ifdef PATCH_AROUND_BAD_SPOTS
-+	u32 offset;
-+	int i;
-+        /*
-+         * arm-linux-objdump -d patch.bin, or
-+         * od -Ax -t x4 patch.bin after finding the bounds
-+         * of the .text section with arm-linux-objdump -s patch.bin
-+         */
-+        u32 patch[] = {
-+	  0xe584c030, 0xe59fc008,
-+	  0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c,
-+	  0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a,
-+	  0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24,
-+	  0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db,
-+	  0x60ca6003, 0xbdf0750a, 0xffff0808
-+	};
-+#endif
-+
-+	FN_ENTER;
-+	/* No combined image; tell common we need the radio firmware, too */
-+	adev->need_radio_fw = 1;
-+
-+	fw_image = acx_s_read_fw(adev->dev, filename, &file_size);
-+	if (!fw_image) {
-+	  FN_EXIT1(NOT_OK);
-+	  return NOT_OK;
-+	}
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxmem_s_write_fw(adev, fw_image, 0);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res);
-+		if (OK == res) {
-+			res = acxmem_s_validate_fw(adev, fw_image, 0);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw "
-+					"(main): %d\n", res);
-+		}
-+
-+		if (OK == res) {
-+			SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED);
-+			break;
-+		}
-+		printk("acx: firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+#ifdef PATCH_AROUND_BAD_SPOTS
-+	/*
-+	 * Only want to do this if the firmware is exactly what we expect for an
-+	 * iPaq 4700; otherwise, bad things would ensue.
-+	 */
-+	if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) ||
-+	    (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) {
-+	  /*
-+	   * Put the patch after the main firmware image.  0x950c contains
-+	   * the ACX's idea of the end of the firmware.  Use that location to
-+	   * load ours (which depends on that location being 0xab58) then
-+	   * update that location to point to after ours.
-+	   */
-+
-+	  offset = read_slavemem32 (adev, 0x950c);
-+	  
-+	  log (L_DEBUG, "acx: patching in at 0x%04x\n", offset);
-+
-+	  for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) {
-+	    write_slavemem32 (adev, offset, patch[i]);
-+	    offset += sizeof(u32);
-+	  }
-+
-+	  /*
-+	   * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58
-+	   */
-+	  write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4);
-+
-+	  /*
-+	   * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74
-+	   *
-+	   * 4a00 ldr r2, [pc, #0]
-+	   * 4710 bx  r2
-+	   * .data 0xab74+1
-+	   */
-+	  write_slavemem32 (adev, 0x1f40, 0x47104a00);
-+	  write_slavemem32 (adev, 0x1f44, 0x0000ab74+1);
-+
-+	  /*
-+	   * Bump the end of the firmware up to beyond our patch.
-+	   */
-+	  write_slavemem32 (adev, 0x950c, offset);
-+	
-+	}
-+#endif
-+
-+	vfree(fw_image);
-+
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_upload_radio
-+**
-+** Uploads the appropriate radio module firmware into the card.
-+*/
-+int
-+acxmem_s_upload_radio(acx_device_t *adev)
-+{
-+	acx_ie_memmap_t mm;
-+	firmware_image_t *radio_image;
-+	acx_cmd_radioinit_t radioinit;
-+	int res = NOT_OK;
-+	int try;
-+	u32 offset;
-+	u32 size;
-+	char filename[sizeof("RADIONN.BIN")];
-+
-+	if (!adev->need_radio_fw) return OK;
-+
-+	FN_ENTER;
-+
-+	acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+	offset = le32_to_cpu(mm.CodeEnd);
-+
-+	snprintf(filename, sizeof(filename), "RADIO%02x.BIN",
-+		adev->radio_type);
-+	radio_image = acx_s_read_fw(adev->dev, filename, &size);
-+	if (!radio_image) {
-+		printk("acx: can't load radio module '%s'\n", filename);
-+		goto fail;
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0);
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxmem_s_write_fw(adev, radio_image, offset);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res);
-+		if (OK == res) {
-+			res = acxmem_s_validate_fw(adev, radio_image, offset);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res);
-+		}
-+
-+		if (OK == res)
-+			break;
-+		printk("acx: radio firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+	radioinit.offset = cpu_to_le32(offset);
-+
-+	/* no endian conversion needed, remains in card CPU area: */
-+	radioinit.len = radio_image->size;
-+
-+	vfree(radio_image);
-+
-+	if (OK != res)
-+		goto fail;
-+
-+	/* will take a moment so let's have a big timeout */
-+	acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT,
-+		&radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000));
-+
-+	res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+
-+fail:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+/***********************************************************************
-+** acxmem_l_reset_mac
-+**
-+** MAC will be reset
-+** Call context: reset_dev
-+*/
-+static void
-+acxmem_l_reset_mac(acx_device_t *adev)
-+{
-+  int count;
-+	FN_ENTER;
-+
-+	/* halt eCPU */
-+	set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1);
-+
-+	/* now do soft reset of eCPU, set bit */
-+	set_regbits (adev, IO_ACX_SOFT_RESET, 0x1);
-+	log(L_DEBUG, "%s: enable soft reset...\n", __func__);
-+
-+	/* Windows driver sleeps here for a while with this sequence */
-+	for (count = 0; count < 200; count++) {
-+	  udelay (50);
-+	}
-+
-+	/* now clear bit again: deassert eCPU reset */
-+	log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__);
-+	clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1);
-+
-+	/* now start a burst read from initial EEPROM */
-+	set_regbits (adev, IO_ACX_EE_START, 0x1);
-+
-+	/*
-+	 * Windows driver sleeps here for a while with this sequence
-+	 */
-+	for (count = 0; count < 200; count++) {
-+	  udelay (50);
-+	}
-+
-+	/* Windows driver writes 0x10000 to register 0x808 here */
-+	
-+	write_reg32 (adev, 0x808, 0x10000);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_verify_init
-+*/
-+static int
-+acxmem_s_verify_init(acx_device_t *adev)
-+{
-+	int result = NOT_OK;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	timeout = jiffies + 2*HZ;
-+	for (;;) {
-+		u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+		if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) {
-+			result = OK;
-+			write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD);
-+			break;
-+		}
-+		if (time_after(jiffies, timeout))
-+			break;
-+		/* Init may take up to ~0.5 sec total */
-+		acx_s_msleep(50);
-+	}
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** A few low-level helpers
-+**
-+** Note: these functions are not protected by lock
-+** and thus are never allowed to be called from IRQ.
-+** Also they must not race with fw upload which uses same hw regs
-+*/
-+
-+/***********************************************************************
-+** acxmem_write_cmd_type_status
-+*/
-+
-+static inline void
-+acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status)
-+{
-+  write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16));
-+  write_flush(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_read_cmd_type_status
-+*/
-+static u32
-+acxmem_read_cmd_type_status(acx_device_t *adev)
-+{
-+	u32 cmd_type, cmd_status;
-+
-+	cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area);
-+
-+	cmd_status = (cmd_type >> 16);
-+	cmd_type = (u16)cmd_type;
-+
-+	log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n",
-+		cmd_type, cmd_status,
-+		acx_cmd_status_str(cmd_status));
-+
-+	return cmd_status;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_reset_dev
-+**
-+** Arguments:
-+**	netdevice that contains the adev variable
-+** Returns:
-+**	NOT_OK on fail
-+**	OK on success
-+** Side effects:
-+**	device is hard reset
-+** Call context:
-+**	acxmem_e_probe
-+** Comment:
-+**	This resets the device using low level hardware calls
-+**	as well as uploads and verifies the firmware to the card
-+*/
-+
-+static inline void
-+init_mboxes(acx_device_t *adev)
-+{
-+	u32 cmd_offs, info_offs;
-+
-+	cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS);
-+	info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS);
-+	adev->cmd_area = (u8*) cmd_offs;
-+	adev->info_area = (u8*) info_offs;
-+	/*
-+	log(L_DEBUG, "iobase2=%p\n"
-+	*/
-+	log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n"
-+		"info_mbox_offset=%X info_area=%p\n",
-+		cmd_offs, adev->cmd_area,
-+		info_offs, adev->info_area);
-+}
-+
-+
-+static inline void
-+read_eeprom_area(acx_device_t *adev)
-+{
-+#if ACX_DEBUG > 1
-+	int offs;
-+	u8 tmp;
-+
-+	for (offs = 0x8c; offs < 0xb9; offs++)
-+		acxmem_read_eeprom_byte(adev, offs, &tmp);
-+#endif
-+}
-+
-+static int
-+acxmem_s_reset_dev(acx_device_t *adev)
-+{
-+	const char* msg = "";
-+	unsigned long flags;
-+	int result = NOT_OK;
-+	u16 hardware_info;
-+	u16 ecpu_ctrl;
-+	int count;
-+	u32 tmp;
-+
-+	FN_ENTER;
-+	/*
-+	write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0);
-+	*/
-+	/* reset the device to make sure the eCPU is stopped
-+	 * to upload the firmware correctly */
-+
-+	acx_lock(adev, flags);
-+
-+	/* Windows driver does some funny things here */
-+	/*
-+	 * clear bit 0x200 in register 0x2A0
-+	 */
-+	clear_regbits (adev, 0x2A0, 0x200);
-+
-+	/*
-+	 * Set bit 0x200 in ACX_GPIO_OUT
-+	 */
-+	set_regbits (adev, IO_ACX_GPIO_OUT, 0x200);
-+
-+	/*
-+	 * read register 0x900 until its value is 0x8400104C, sleeping
-+	 * in between reads if it's not immediate
-+	 */
-+	tmp = read_reg32 (adev, REG_ACX_VENDOR_ID);
-+	count = 500;
-+	while (count-- && (tmp != ACX_VENDOR_ID)) {
-+	  mdelay (10);
-+	  tmp = read_reg32 (adev, REG_ACX_VENDOR_ID);
-+	}
-+
-+	/* end what Windows driver does */
-+
-+	acxmem_l_reset_mac(adev);
-+
-+	ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1;
-+	if (!ecpu_ctrl) {
-+		msg = "eCPU is already running. ";
-+		goto end_unlock;
-+	}
-+
-+#ifdef WE_DONT_NEED_THAT_DO_WE
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) {
-+		/* eCPU most likely means "embedded CPU" */
-+		msg = "eCPU did not start after boot from flash. ";
-+		goto end_unlock;
-+	}
-+
-+	/* check sense on reset flags */
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) {
-+		printk("%s: eCPU did not start after boot (SOR), "
-+			"is this fatal?\n", adev->ndev->name);
-+	}
-+#endif
-+	/* scan, if any, is stopped now, setting corresponding IRQ bit */
-+	adev->irq_status |= HOST_INT_SCAN_COMPLETE;
-+
-+	acx_unlock(adev, flags);
-+	
-+	/* need to know radio type before fw load */
-+	/* Need to wait for arrival of this information in a loop,
-+	 * most probably since eCPU runs some init code from EEPROM
-+	 * (started burst read in reset_mac()) which also
-+	 * sets the radio type ID */
-+
-+	count = 0xffff;
-+	do {
-+		hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION);
-+		if (!--count) {
-+			msg = "eCPU didn't indicate radio type";
-+			goto end_fail;
-+		}
-+		cpu_relax();
-+	} while (!(hardware_info & 0xff00)); /* radio type still zero? */
-+	printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff);
-+	/* printk("DEBUG: count %d\n", count); */
-+	adev->form_factor = hardware_info & 0xff;
-+	adev->radio_type = hardware_info >> 8;
-+
-+	/* load the firmware */
-+	if (OK != acxmem_s_upload_fw(adev))
-+		goto end_fail;
-+
-+	/* acx_s_msleep(10);	this one really shouldn't be required */
-+
-+	/* now start eCPU by clearing bit */
-+	clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1);
-+	log(L_DEBUG, "booted eCPU up and waiting for completion...\n");
-+
-+	/* Windows driver clears bit 0x200 in register 0x2A0 here */
-+	clear_regbits (adev, 0x2A0, 0x200);
-+
-+	/* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */
-+	set_regbits (adev, IO_ACX_GPIO_OUT, 0x200);
-+	/* wait for eCPU bootup */
-+	if (OK != acxmem_s_verify_init(adev)) {
-+		msg = "timeout waiting for eCPU. ";
-+		goto end_fail;
-+	}
-+	log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n");
-+	init_mboxes(adev);
-+	acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0);
-+
-+	/* test that EEPROM is readable */
-+	read_eeprom_area(adev);
-+
-+	result = OK;
-+	goto end;
-+
-+/* Finish error message. Indicate which function failed */
-+end_unlock:
-+	acx_unlock(adev, flags);
-+end_fail:
-+	printk("acx: %sreset_dev() FAILED\n", msg);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_issue_cmd_timeo
-+**
-+** Sends command to fw, extract result
-+**
-+** NB: we do _not_ take lock inside, so be sure to not touch anything
-+** which may interfere with IRQ handler operation
-+**
-+** TODO: busy wait is a bit silly, so:
-+** 1) stop doing many iters - go to sleep after first
-+** 2) go to waitqueue based approach: wait, not poll!
-+*/
-+#undef FUNC
-+#define FUNC "issue_cmd"
-+
-+#if !ACX_DEBUG
-+int
-+acxmem_s_issue_cmd_timeo(
-+	acx_device_t *adev,
-+	unsigned int cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout)
-+{
-+#else
-+int
-+acxmem_s_issue_cmd_timeo_debug(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout,
-+	const char* cmdstr)
-+{
-+	unsigned long start = jiffies;
-+#endif
-+	const char *devname;
-+	unsigned counter;
-+	u16 irqtype;
-+	int i, j;
-+	u8 *p;
-+	u16 cmd_status;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	devname = adev->ndev->name;
-+	if (!devname || !devname[0] || devname[4]=='%')
-+		devname = "acx";
-+
-+	log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n",
-+		cmdstr, buflen, cmd_timeout,
-+		buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1);
-+
-+	if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) {
-+		printk("%s: "FUNC"(): firmware is not loaded yet, "
-+			"cannot execute commands!\n", devname);
-+		goto bad;
-+	}
-+
-+	if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) {
-+		printk("input buffer (len=%u):\n", buflen);
-+		acx_dump_bytes(buffer, buflen);
-+	}
-+
-+	/* wait for firmware to become idle for our command submission */
-+	timeout = HZ/5;
-+	counter = (timeout * 1000 / HZ) - 1; /* in ms */
-+	timeout += jiffies;
-+	do {
-+		cmd_status = acxmem_read_cmd_type_status(adev);
-+		/* Test for IDLE state */
-+		if (!cmd_status)
-+			break;
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	if (!counter) {
-+		/* the card doesn't get idle, we're in trouble */
-+		printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n",
-+			devname, cmd_status);
-+#if DUMP_IF_SLOW > 0
-+		dump_acxmem (adev, 0, 0x10000);
-+		panic ("not idle");
-+#endif
-+		goto bad;
-+	} else if (counter < 190) { /* if waited >10ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. "
-+			"Please report\n", 199 - counter);
-+	}
-+
-+	/* now write the parameters of the command if needed */
-+	if (buffer && buflen) {
-+		/* if it's an INTERROGATE command, just pass the length
-+		 * of parameters to read, as data */
-+#if CMD_DISCOVERY
-+		if (cmd == ACX1xx_CMD_INTERROGATE)
-+			memset_io(adev->cmd_area + 4, 0xAA, buflen);
-+#endif
-+		/*
-+		 * slave memory version
-+		 */
-+		copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, 
-+			       (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen);
-+	}
-+	/* now write the actual command type */
-+	acxmem_write_cmd_type_status(adev, cmd, 0);
-+
-+	/* clear CMD_COMPLETE bit. can be set only by IRQ handler: */
-+	adev->irq_status &= ~HOST_INT_CMD_COMPLETE;
-+
-+	/* execute command */
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD);
-+	write_flush(adev);
-+
-+	/* wait for firmware to process command */
-+
-+	/* Ensure nonzero and not too large timeout.
-+	** Also converts e.g. 100->99, 200->199
-+	** which is nice but not essential */
-+	cmd_timeout = (cmd_timeout-1) | 1;
-+	if (unlikely(cmd_timeout > 1199))
-+		cmd_timeout = 1199;
-+
-+	/* we schedule away sometimes (timeout can be large) */
-+	counter = cmd_timeout;
-+	timeout = jiffies + cmd_timeout * HZ / 1000;
-+	do {
-+		if (!adev->irqs_active) { /* IRQ disabled: poll */
-+			irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+			if (irqtype & HOST_INT_CMD_COMPLETE) {
-+				write_reg16(adev, IO_ACX_IRQ_ACK,
-+						HOST_INT_CMD_COMPLETE);
-+				break;
-+			}
-+		} else { /* Wait when IRQ will set the bit */
-+			irqtype = adev->irq_status;
-+			if (irqtype & HOST_INT_CMD_COMPLETE)
-+				break;
-+		}
-+
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	/* save state for debugging */
-+	cmd_status = acxmem_read_cmd_type_status(adev);
-+
-+	/* put the card in IDLE state */
-+	acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0);
-+
-+	if (!counter) {	/* timed out! */
-+		printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. "
-+			"irq bits:0x%04X irq_status:0x%04X timeout:%dms "
-+			"cmd_status:%d (%s)\n",
-+			devname, (adev->irqs_active) ? "waiting" : "polling",
-+			irqtype, adev->irq_status, cmd_timeout,
-+			cmd_status, acx_cmd_status_str(cmd_status));
-+		printk("%s: "FUNC"(): device irq status 0x%04x\n",
-+		       devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES));
-+		printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n",
-+		       devname,
-+		       read_reg16 (adev, IO_ACX_IRQ_MASK),
-+		       read_reg16 (adev, IO_ACX_FEMR));
-+		if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) {
-+			printk ("acxmem: firmware probably hosed - reloading\n");
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+                	{
-+				pm_message_t state;
-+				acxmem_e_suspend (resume_pdev, state);
-+			}
-+#else
-+			acxmem_e_suspend (adev->dev, 0);
-+#endif
-+			{
-+				struct work_struct *notused;
-+				fw_resumer (notused);
-+			}
-+		}
-+
-+		goto bad;
-+	} else if (cmd_timeout - counter > 30) { /* if waited >30ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. "
-+			"count:%d. Please report\n",
-+			(adev->irqs_active) ? "waited" : "polled",
-+			cmd_timeout - counter, counter);
-+	}
-+
-+	if (1 != cmd_status) { /* it is not a 'Success' */
-+		printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). "
-+			"Took %dms of %d\n",
-+			devname, cmd_status, acx_cmd_status_str(cmd_status),
-+			cmd_timeout - counter, cmd_timeout);
-+		/* zero out result buffer
-+		 * WARNING: this will trash stack in case of illegally large input
-+		 * length! */
-+		if (buflen > 388) {
-+		  /*
-+		   * 388 is maximum command length
-+		   */
-+		  printk ("invalid length 0x%08x\n", buflen);
-+		  buflen = 388;
-+		}
-+		p = (u8 *) buffer;
-+		for (i = 0; i < buflen; i+= 16) {
-+		  printk ("%04x:", i);
-+		  for (j = 0; (j < 16) && (i+j < buflen); j++) {
-+		    printk (" %02x", *p++);
-+		  }
-+		  printk ("\n");
-+		}
-+
-+		if (buffer && buflen)
-+			memset(buffer, 0, buflen);
-+		goto bad;
-+	}
-+
-+	/* read in result parameters if needed */
-+	if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) {
-+		copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen);
-+		if (acx_debug & L_DEBUG) {
-+			printk("output buffer (len=%u): ", buflen);
-+			acx_dump_bytes(buffer, buflen);
-+		}
-+	}
-+
-+/* ok: */
-+	log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n",
-+			 cmdstr, jiffies - start);
-+	FN_EXIT1(OK);
-+	return OK;
-+
-+bad:
-+	/* Give enough info so that callers can avoid
-+	** printing their own diagnostic messages */
-+#if ACX_DEBUG
-+	printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr);
-+#else
-+	printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd);
-+#endif
-+	dump_stack();
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#if defined(NONESSENTIAL_FEATURES)
-+typedef struct device_id {
-+	unsigned char id[6];
-+	char *descr;
-+	char *type;
-+} device_id_t;
-+
-+static const device_id_t
-+device_ids[] =
-+{
-+	{
-+		{'G', 'l', 'o', 'b', 'a', 'l'},
-+		NULL,
-+		NULL,
-+	},
-+	{
-+		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
-+		"uninitialized",
-+		"SpeedStream SS1021 or Gigafast WF721-AEX"
-+	},
-+	{
-+		{0x80, 0x81, 0x82, 0x83, 0x84, 0x85},
-+		"non-standard",
-+		"DrayTek Vigor 520"
-+	},
-+	{
-+		{'?', '?', '?', '?', '?', '?'},
-+		"non-standard",
-+		"Level One WPC-0200"
-+	},
-+	{
-+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
-+		"empty",
-+		"DWL-650+ variant"
-+	}
-+};
-+
-+static void
-+acx_show_card_eeprom_id(acx_device_t *adev)
-+{
-+	unsigned char buffer[CARD_EEPROM_ID_SIZE];
-+	int i;
-+
-+	memset(&buffer, 0, CARD_EEPROM_ID_SIZE);
-+	/* use direct EEPROM access */
-+	for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) {
-+		if (OK != acxmem_read_eeprom_byte(adev,
-+					 ACX100_EEPROM_ID_OFFSET + i,
-+					 &buffer[i])) {
-+			printk("acx: reading EEPROM FAILED\n");
-+			break;
-+		}
-+	}
-+
-+	for (i = 0; i < VEC_SIZE(device_ids); i++) {
-+		if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) {
-+			if (device_ids[i].descr) {
-+				printk("acx: EEPROM card ID string check "
-+					"found %s card ID: is this %s?\n",
-+					device_ids[i].descr, device_ids[i].type);
-+			}
-+			break;
-+		}
-+	}
-+	if (i == VEC_SIZE(device_ids)) {
-+		printk("acx: EEPROM card ID string check found "
-+			"unknown card: expected 'Global', got '%.*s\'. "
-+			"Please report\n", CARD_EEPROM_ID_SIZE, buffer);
-+	}
-+}
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+/***********************************************************************
-+** acxmem_free_desc_queues
-+**
-+** Releases the queues that have been allocated, the
-+** others have been initialised to NULL so this
-+** function can be used if only part of the queues were allocated.
-+*/
-+
-+void
-+acxmem_free_desc_queues(acx_device_t *adev)
-+{
-+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \
-+        if (ptr) { \
-+                kfree(ptr); \
-+                ptr = NULL; \
-+                size = 0; \
-+        }
-+
-+	FN_ENTER;
-+
-+	ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy);
-+
-+	adev->txdesc_start = NULL;
-+
-+	ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy);
-+
-+	adev->rxdesc_start = NULL;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_delete_dma_regions
-+*/
-+static void
-+acxmem_s_delete_dma_regions(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+	/* disable radio Tx/Rx. Shouldn't we use the firmware commands
-+	 * here instead? Or are we that much down the road that it's no
-+	 * longer possible here? */
-+	/*
-+	 * slave memory interface really doesn't like this.
-+	 */
-+	/*
-+	write_reg16(adev, IO_ACX_ENABLE, 0);
-+	*/
-+
-+	acx_s_msleep(100);
-+
-+	acx_lock(adev, flags);
-+	acxmem_free_desc_queues(adev);
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_probe
-+**
-+** Probe routine called when a PCI device w/ matching ID is found.
-+** Here's the sequence:
-+**   - Allocate the PCI resources.
-+**   - Read the PCMCIA attribute memory to make sure we have a WLAN card
-+**   - Reset the MAC
-+**   - Initialize the dev and wlan data
-+**   - Initialize the MAC
-+**
-+** pdev	- ptr to pci device structure containing info about pci configuration
-+** id	- ptr to the device id entry that matched this device
-+*/
-+static const u16
-+IO_ACX100[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_END_CTL */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x007c, /* IO_ACX_INT_TRIG */
-+	0x0098, /* IO_ACX_IRQ_MASK */
-+	0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00ac, /* IO_ACX_IRQ_ACK */
-+	0x00b0, /* IO_ACX_HINT_TRIG */
-+
-+	0x0104, /* IO_ACX_ENABLE */
-+
-+	0x0250, /* IO_ACX_EEPROM_CTL */
-+	0x0254, /* IO_ACX_EEPROM_ADDR */
-+	0x0258, /* IO_ACX_EEPROM_DATA */
-+	0x025c, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0268, /* IO_ACX_PHY_ADDR */
-+	0x026c, /* IO_ACX_PHY_DATA */
-+	0x0270, /* IO_ACX_PHY_CTL */
-+
-+	0x0290, /* IO_ACX_GPIO_OE */
-+
-+	0x0298, /* IO_ACX_GPIO_OUT */
-+
-+	0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x02ac, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x02d0, /* IO_ACX_EE_START */
-+	0x02d4, /* IO_ACX_SOR_CFG */
-+	0x02d8 /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static const u16
-+IO_ACX111[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_MEM_CP */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x00b4, /* IO_ACX_INT_TRIG */
-+	0x00d4, /* IO_ACX_IRQ_MASK */
-+	/* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */
-+	0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00e8, /* IO_ACX_IRQ_ACK */
-+	0x00ec, /* IO_ACX_HINT_TRIG */
-+
-+	0x01d0, /* IO_ACX_ENABLE */
-+
-+	0x0338, /* IO_ACX_EEPROM_CTL */
-+	0x033c, /* IO_ACX_EEPROM_ADDR */
-+	0x0340, /* IO_ACX_EEPROM_DATA */
-+	0x0344, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0350, /* IO_ACX_PHY_ADDR */
-+	0x0354, /* IO_ACX_PHY_DATA */
-+	0x0358, /* IO_ACX_PHY_CTL */
-+
-+	0x0374, /* IO_ACX_GPIO_OE */
-+
-+	0x037c, /* IO_ACX_GPIO_OUT */
-+
-+	0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x0390, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x0100, /* IO_ACX_EE_START */
-+	0x0104, /* IO_ACX_SOR_CFG */
-+	0x0108, /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static void
-+dummy_netdev_init(struct net_device *ndev) {}
-+
-+/*
-+ * Most of the acx specific pieces of hardware reset.
-+ */
-+static int
-+acxmem_complete_hw_reset (acx_device_t *adev)
-+{
-+	acx111_ie_configoption_t co;
-+
-+	/* NB: read_reg() reads may return bogus data before reset_dev(),
-+	 * since the firmware which directly controls large parts of the I/O
-+	 * registers isn't initialized yet.
-+	 * acx100 seems to be more affected than acx111 */
-+	if (OK != acxmem_s_reset_dev (adev))
-+	  return -1;
-+
-+	if (IS_ACX100(adev)) {
-+		/* ACX100: configopt struct in cmd mailbox - directly after reset */
-+		copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co));
-+	}
-+
-+	if (OK != acx_s_init_mac(adev))
-+	  return -3;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111: configopt struct needs to be queried after full init */
-+		acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS);
-+	}
-+
-+	/*
-+	 * Set up transmit buffer administration
-+	 */
-+	init_acx_txbuf (adev);
-+
-+	/*
-+	 * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor
-+	 * is 3.  It also write protects the EEPROM by writing 1<<9 to GPIO_OUT
-+	 */
-+	if (adev->form_factor == 3) {
-+	  set_regbits (adev, 0x288, 0x01000000);
-+	  set_regbits (adev, 0x298, 1<<9);
-+	}
-+
-+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */
-+	if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version))
-+	  return -2;
-+
-+	acx_s_parse_configoption(adev, &co);
-+	acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */
-+	acx_display_hardware_details(adev);
-+
-+	return 0;
-+}
-+
-+static int __devinit
-+acxmem_e_probe(struct platform_device *pdev)
-+{
-+	struct acx_hardware_data *hwdata = pdev->dev.platform_data;
-+	acx_device_t *adev = NULL;
-+	struct net_device *ndev = NULL;
-+	const char *chip_name;
-+	int result = -EIO;
-+	int err;
-+	int i;
-+	unsigned long addr_size=0;
-+	u8 chip_type;
-+
-+	FN_ENTER;
-+	(void) hwdata->start_hw();
-+
-+	/* FIXME: prism54 calls pci_set_mwi() here,
-+	 * should we do/support the same? */
-+
-+	/* chiptype is u8 but id->driver_data is ulong
-+	** Works for now (possible values are 1 and 2) */
-+	chip_type = CHIPTYPE_ACX100;
-+	/* acx100 and acx111 have different PCI memory regions */
-+	if (chip_type == CHIPTYPE_ACX100) {
-+		chip_name = "ACX100";
-+	} else if (chip_type == CHIPTYPE_ACX111) {
-+		chip_name = "ACX111";
-+	} else {
-+		printk("acx: unknown chip type 0x%04X\n", chip_type);
-+		goto fail_unknown_chiptype;
-+	}
-+
-+	printk("acx: found %s-based wireless network card\n", chip_name);
-+	log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug);
-+
-+	ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init);
-+	/* (NB: memsets to 0 entire area) */
-+	if (!ndev) {
-+		printk("acx: no memory for netdevice struct\n");
-+		goto fail_alloc_netdev;
-+	}
-+
-+	platform_set_drvdata (pdev, ndev);
-+
-+	ether_setup(ndev);
-+
-+	/*
-+	 * use platform_data resources that were provided
-+	 */
-+	ndev->irq = 0;
-+	for (i=0; i<pdev->num_resources; i++) {
-+		if (pdev->resource[i].flags == IORESOURCE_IRQ) {
-+			ndev->irq = pdev->resource[i].start;
-+		}
-+		else if (pdev->resource[i].flags == IORESOURCE_MEM) {
-+			ndev->base_addr = pdev->resource[i].start;
-+			addr_size = pdev->resource[i].end - pdev->resource[i].start;
-+		}
-+	}
-+	if (addr_size == 0 || ndev->irq == 0)
-+		goto fail_hw_params;
-+	ndev->open = &acxmem_e_open;
-+	ndev->stop = &acxmem_e_close;
-+	pdev->dev.release = &acxmem_e_release;
-+	ndev->hard_start_xmit = &acx_i_start_xmit;
-+	ndev->get_stats = &acx_e_get_stats;
-+#if IW_HANDLER_VERSION <= 5
-+	ndev->get_wireless_stats = &acx_e_get_wireless_stats;
-+#endif
-+	ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
-+	ndev->set_multicast_list = &acxmem_i_set_multicast_list;
-+	ndev->tx_timeout = &acxmem_i_tx_timeout;
-+	ndev->change_mtu = &acx_e_change_mtu;
-+	ndev->watchdog_timeo = 4 * HZ;
-+
-+	adev = ndev2adev(ndev);
-+	spin_lock_init(&adev->lock);	/* initial state: unlocked */
-+	spin_lock_init(&adev->txbuf_lock);
-+	/* We do not start with downed sem: we want PARANOID_LOCKING to work */
-+	sema_init(&adev->sem, 1);	/* initial state: 1 (upped) */
-+	/* since nobody can see new netdev yet, we can as well
-+	** just _presume_ that we're under sem (instead of actually taking it): */
-+	/* acx_sem_lock(adev); */
-+	adev->dev = &pdev->dev;
-+	adev->ndev = ndev;
-+	adev->dev_type = DEVTYPE_MEM;
-+	adev->chip_type = chip_type;
-+	adev->chip_name = chip_name;
-+	adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111;
-+	adev->membase = (volatile u32 *) ndev->base_addr;
-+	adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size);
-+	/* to find crashes due to weird driver access
-+	 * to unconfigured interface (ifup) */
-+	adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead;
-+
-+#if defined(NONESSENTIAL_FEATURES)
-+	acx_show_card_eeprom_id(adev);
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+#ifdef SET_MODULE_OWNER
-+	SET_MODULE_OWNER(ndev);
-+#endif
-+	SET_NETDEV_DEV(ndev, &pdev->dev);
-+
-+	log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq);
-+
-+	/* ok, pci setup is finished, now start initializing the card */
-+
-+	if (OK != acxmem_complete_hw_reset (adev))
-+	  goto fail_reset;
-+
-+	/*
-+	 * Set up default things for most of the card settings.
-+	 */
-+	acx_s_set_defaults(adev);
-+
-+	/* Register the card, AFTER everything else has been set up,
-+	 * since otherwise an ioctl could step on our feet due to
-+	 * firmware operations happening in parallel or uninitialized data */
-+	err = register_netdev(ndev);
-+	if (OK != err) {
-+		printk("acx: register_netdev() FAILED: %d\n", err);
-+		goto fail_register_netdev;
-+	}
-+
-+	acx_proc_register_entries(ndev);
-+
-+	/* Now we have our device, so make sure the kernel doesn't try
-+	 * to send packets even though we're not associated to a network yet */
-+	acx_stop_queue(ndev, "on probe");
-+	acx_carrier_off(ndev, "on probe");
-+
-+	/*
-+	 * Set up a default monitor type so that poor combinations of initialization
-+	 * sequences in monitor mode don't end up destroying the hardware type.
-+	 */
-+	adev->monitor_type = ARPHRD_ETHER;
-+
-+	/*
-+	 * Register to receive inetaddr notifier changes.  This will allow us to
-+	 * catch if the user changes the MAC address of the interface.
-+	 */
-+	register_netdevice_notifier(&acx_netdev_notifier);
-+
-+	/* after register_netdev() userspace may start working with dev
-+	 * (in particular, on other CPUs), we only need to up the sem */
-+	/* acx_sem_unlock(adev); */
-+
-+	printk("acx "ACX_RELEASE": net device %s, driver compiled "
-+		"against wireless extensions %d and Linux %s\n",
-+		ndev->name, WIRELESS_EXT, UTS_RELEASE);
-+
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	result = OK;
-+	goto done;
-+
-+	/* error paths: undo everything in reverse order... */
-+
-+fail_register_netdev:
-+
-+	acxmem_s_delete_dma_regions(adev);
-+
-+fail_reset:
-+fail_hw_params:
-+	free_netdev(ndev);
-+fail_alloc_netdev:
-+fail_unknown_chiptype:
-+
-+
-+done:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_remove
-+**
-+** Shut device down (if not hot unplugged)
-+** and deallocate PCI resources for the acx chip.
-+**
-+** pdev - ptr to PCI device structure containing info about pci configuration
-+*/
-+static int __devexit
-+acxmem_e_remove(struct platform_device *pdev)
-+{
-+	struct acx_hardware_data *hwdata = pdev->dev.platform_data;
-+	struct net_device *ndev;
-+	acx_device_t *adev;
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	ndev = (struct net_device*) platform_get_drvdata(pdev);
-+	if (!ndev) {
-+		log(L_DEBUG, "%s: card is unused. Skipping any release code\n",
-+			__func__);
-+		goto end;
-+	}
-+
-+	adev = ndev2adev(ndev);
-+
-+	/* If device wasn't hot unplugged... */
-+	if (adev_present(adev)) {
-+
-+		acx_sem_lock(adev);
-+
-+		/* disable both Tx and Rx to shut radio down properly */
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+
-+#ifdef REDUNDANT
-+		/* put the eCPU to sleep to save power
-+		 * Halting is not possible currently,
-+		 * since not supported by all firmware versions */
-+		acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0);
-+#endif
-+		acx_lock(adev, flags);
-+
-+		/* disable power LED to save power :-) */
-+		log(L_INIT, "switching off power LED to save power\n");
-+		acxmem_l_power_led(adev, 0);
-+
-+		/* stop our eCPU */
-+		if (IS_ACX111(adev)) {
-+			/* FIXME: does this actually keep halting the eCPU?
-+			 * I don't think so...
-+			 */
-+			acxmem_l_reset_mac(adev);
-+		} else {
-+			u16 temp;
-+
-+			/* halt eCPU */
-+			temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1;
-+			write_reg16(adev, IO_ACX_ECPU_CTRL, temp);
-+			write_flush(adev);
-+		}
-+
-+		acx_unlock(adev, flags);
-+
-+		acx_sem_unlock(adev);
-+	}
-+
-+
-+	/*
-+	 * Unregister the notifier chain
-+	 */
-+	unregister_netdevice_notifier(&acx_netdev_notifier);
-+
-+	/* unregister the device to not let the kernel
-+	 * (e.g. ioctls) access a half-deconfigured device
-+	 * NB: this will cause acxmem_e_close() to be called,
-+	 * thus we shouldn't call it under sem! */
-+	log(L_INIT, "removing device %s\n", ndev->name);
-+	unregister_netdev(ndev);
-+
-+	/* unregister_netdev ensures that no references to us left.
-+	 * For paranoid reasons we continue to follow the rules */
-+	acx_sem_lock(adev);
-+
-+	if (adev->dev_state_mask & ACX_STATE_IFACE_UP) {
-+		acxmem_s_down(ndev);
-+		CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	}
-+
-+	acx_proc_unregister_entries(ndev);
-+
-+	acxmem_s_delete_dma_regions(adev);
-+
-+	/* finally, clean up PCI bus state */
-+	if (adev->iobase) iounmap((void *)adev->iobase);
-+
-+	acx_sem_unlock(adev);
-+
-+	/* Free netdev (quite late,
-+	 * since otherwise we might get caught off-guard
-+	 * by a netdev timeout handler execution
-+	 * expecting to see a working dev...) */
-+	free_netdev(ndev);
-+
-+	(void) hwdata->stop_hw();
-+
-+	printk ("e_remove done\n");
-+end:
-+	FN_EXIT0;
-+
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** TODO: PM code needs to be fixed / debugged / tested.
-+*/
-+#ifdef CONFIG_PM
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxmem_e_suspend(struct platform_device *pdev, pm_message_t state)
-+#else
-+acxmem_e_suspend(struct device *pdev, u32 state)
-+#endif
-+{
-+	struct net_device *ndev = platform_get_drvdata(pdev);
-+	acx_device_t *adev;
-+	struct acx_hardware_data *hwdata;
-+
-+	FN_ENTER;
-+	printk("acx: suspend handler is experimental!\n");
-+	printk("sus: dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		goto end;
-+
-+	adev = ndev2adev(ndev);
-+	printk("sus: adev %p\n", adev);
-+
-+	hwdata = adev->dev->platform_data;
-+
-+	acx_sem_lock(adev);
-+
-+	netif_device_detach(ndev);	/* this one cannot sleep */
-+	acxmem_s_down(ndev);
-+	/* down() does not set it to 0xffff, but here we really want that */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	acxmem_s_delete_dma_regions(adev);
-+
-+	/*
-+	 * Turn the ACX chip off.
-+	 */
-+	hwdata->stop_hw();
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+
-+static void
-+fw_resumer(struct work_struct *notused)
-+{
-+        struct platform_device *pdev = resume_pdev;
-+	struct net_device *ndev = platform_get_drvdata(pdev);
-+	acx_device_t *adev;
-+	struct acx_hardware_data *hwdata;
-+
-+	printk("acx: resume handler is experimental!\n");
-+	printk("rsm: got dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		return;
-+
-+	adev = ndev2adev(ndev);
-+	printk("rsm: got adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	hwdata = adev->dev->platform_data;
-+
-+	/*
-+	 * Turn on the ACX.
-+	 */
-+	hwdata->start_hw();
-+
-+	acxmem_complete_hw_reset (adev);
-+
-+	/*
-+	 * done by acx_s_set_defaults for initial startup
-+	 */
-+	acxmem_set_interrupt_mask(adev);
-+
-+	printk ("rsm: bringing up interface\n");
-+	SET_BIT (adev->set_mask, GETSET_ALL);
-+	acxmem_s_up(ndev);
-+	printk("rsm: acx up done\n");
-+
-+	/* now even reload all card parameters as they were before suspend,
-+	 * and possibly be back in the network again already :-) 
-+	 */
-+	/* - most settings updated in acxmem_s_up()
-+	if (ACX_STATE_IFACE_UP & adev->dev_state_mask) {
-+		adev->set_mask = GETSET_ALL;
-+		acx_s_update_card_settings(adev);
-+		printk("rsm: settings updated\n");
-+	}
-+	*/
-+	netif_device_attach(ndev);
-+	printk("rsm: device attached\n");
-+
-+	acx_sem_unlock(adev);
-+}
-+
-+DECLARE_WORK( fw_resume_work, fw_resumer );
-+
-+static int
-+acxmem_e_resume(struct platform_device *pdev)
-+{
-+	FN_ENTER;
-+
-+	resume_pdev = pdev;
-+	schedule_work( &fw_resume_work );
-+
-+	FN_EXIT0;
-+	return OK;
-+}
-+#endif /* CONFIG_PM */
-+
-+
-+/***********************************************************************
-+** acxmem_s_up
-+**
-+** This function is called by acxmem_e_open (when ifconfig sets the device as up)
-+**
-+** Side effects:
-+** - Enables on-card interrupt requests
-+** - calls acx_s_start
-+*/
-+
-+static void
-+enable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask);
-+	write_reg16(adev, IO_ACX_FEMR, 0x8000);
-+	adev->irqs_active = 1;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxmem_s_up(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+	enable_acx_irq(adev);
-+	acx_unlock(adev, flags);
-+
-+	/* acx fw < 1.9.3.e has a hardware timer, and older drivers
-+	** used to use it. But we don't do that anymore, our OS
-+	** has reliable software timers */
-+	init_timer(&adev->mgmt_timer);
-+	adev->mgmt_timer.function = acx_i_timer;
-+	adev->mgmt_timer.data = (unsigned long)adev;
-+
-+	/* Need to set ACX_STATE_IFACE_UP first, or else
-+	** timer won't be started by acx_set_status() */
-+	SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_2_STA:
-+		/* actual scan cmd will happen in start() */
-+		acx_set_status(adev, ACX_STATUS_1_SCANNING); break;
-+	case ACX_MODE_3_AP:
-+	case ACX_MODE_MONITOR:
-+		acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break;
-+	}
-+
-+	acx_s_start(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_down
-+**
-+** This disables the netdevice
-+**
-+** Side effects:
-+** - disables on-card interrupt request
-+*/
-+
-+static void
-+disable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+
-+	/* I guess mask is not 0xffff because acx100 won't signal
-+	** cmd completion then (needed for ifup).
-+	** Someone with acx100 please confirm */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	adev->irqs_active = 0;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxmem_s_down(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	/* Disable IRQs first, so that IRQs cannot race with us */
-+	/* then wait until interrupts have finished executing on other CPUs */
-+	acx_lock(adev, flags);
-+	disable_acx_irq(adev);
-+	synchronize_irq(adev->pdev->irq);
-+	acx_unlock(adev, flags);
-+
-+	/* we really don't want to have an asynchronous tasklet disturb us
-+	** after something vital for its job has been shut down, so
-+	** end all remaining work now.
-+	**
-+	** NB: carrier_off (done by set_status below) would lead to
-+	** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK().
-+	** That's why we do FLUSH first.
-+	**
-+	** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK()
-+	** waits for acx_e_after_interrupt_task to complete if it is running
-+	** on another CPU, but acx_e_after_interrupt_task
-+	** will sleep on sem forever, because it is taken by us!
-+	** Work around that by temporary sem unlock.
-+	** This will fail miserably if we'll be hit by concurrent
-+	** iwconfig or something in between. TODO! */
-+	acx_sem_unlock(adev);
-+	FLUSH_SCHEDULED_WORK();
-+	acx_sem_lock(adev);
-+
-+	/* This is possible:
-+	** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task ->
-+	** -> set_status(ASSOCIATED) -> wake_queue()
-+	** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK
-+	** lock/unlock is just paranoia, maybe not needed */
-+	acx_lock(adev, flags);
-+	acx_stop_queue(ndev, "on ifdown");
-+	acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+	acx_unlock(adev, flags);
-+
-+	/* kernel/timer.c says it's illegal to del_timer_sync()
-+	** a timer which restarts itself. We guarantee this cannot
-+	** ever happen because acx_i_timer() never does this if
-+	** status is ACX_STATUS_0_STOPPED */
-+	del_timer_sync(&adev->mgmt_timer);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_open
-+**
-+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP
-+** from clear to set. In other words: ifconfig up.
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxmem_e_open(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_init_task_scheduler(adev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */
-+
-+	/* request shared IRQ handler */
-+	if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) {
-+		printk("%s: request_irq FAILED\n", ndev->name);
-+		result = -EAGAIN;
-+		goto done;
-+	}
-+	set_irq_type (ndev->irq, IRQT_FALLING);
-+	log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq);
-+
-+	/* ifup device */
-+	acxmem_s_up(ndev);
-+
-+	/* We don't currently have to do anything else.
-+	 * The setup of the MAC should be subsequently completed via
-+	 * the mlme commands.
-+	 * Higher layers know we're ready from dev->start==1 and
-+	 * dev->tbusy==0.  Our rx path knows to pass up received/
-+	 * frames because of dev->flags&IFF_UP is true.
-+	 */
-+done:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_close
-+**
-+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
-+** from set to clear. I.e. called by "ifconfig DEV down"
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxmem_e_close(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* ifdown device */
-+	CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	if (netif_device_present(ndev)) {
-+		acxmem_s_down(ndev);
-+	}
-+
-+	/* disable all IRQs, release shared IRQ handler */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	free_irq(ndev->irq, ndev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */
-+
-+	/* We currently don't have to do anything else.
-+	 * Higher layers know we're not ready from dev->start==0 and
-+	 * dev->tbusy==1.  Our rx path knows to not pass up received
-+	 * frames because of dev->flags&IFF_UP is false.
-+	 */
-+	acx_sem_unlock(adev);
-+
-+	log(L_INIT, "closed device\n");
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_tx_timeout
-+**
-+** Called from network core. Must not sleep!
-+*/
-+static void
-+acxmem_i_tx_timeout(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	unsigned int tx_num_cleaned;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* clean processed tx descs, they may have been completely full */
-+	tx_num_cleaned = acxmem_l_clean_txdesc(adev);
-+
-+	/* nothing cleaned, yet (almost) no free buffers available?
-+	 * --> clean all tx descs, no matter which status!!
-+	 * Note that I strongly suspect that doing emergency cleaning
-+	 * may confuse the firmware. This is a last ditch effort to get
-+	 * ANYTHING to work again...
-+	 *
-+	 * TODO: it's best to simply reset & reinit hw from scratch...
-+	 */
-+	if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) {
-+		printk("%s: FAILED to free any of the many full tx buffers. "
-+			"Switching to emergency freeing. "
-+			"Please report!\n", ndev->name);
-+		acxmem_l_clean_txdesc_emergency(adev);
-+	}
-+
-+	if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status))
-+		acx_wake_queue(ndev, "after tx timeout");
-+
-+	/* stall may have happened due to radio drift, so recalib radio */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+
-+	/* do unimportant work last */
-+	printk("%s: tx timeout!\n", ndev->name);
-+	adev->stats.tx_errors++;
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_set_multicast_list
-+** FIXME: most likely needs refinement
-+*/
-+static void
-+acxmem_i_set_multicast_list(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* firmwares don't have allmulti capability,
-+	 * so just use promiscuous mode instead in this case. */
-+	if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
-+		SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		/* let kernel know in case *we* needed to set promiscuous */
-+		ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI);
-+	} else {
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI);
-+	}
-+
-+	/* cannot update card settings directly here, atomic context */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_l_process_rxdesc
-+**
-+** Called directly and only from the IRQ handler
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_rxbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_rxbuffer(const acx_device_t *adev)
-+{
-+	register const struct rxhostdesc *rxhostdesc;
-+	int i;
-+	/* no FN_ENTER here, we don't want that */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+	if (unlikely(!rxhostdesc)) return;
-+	for (i = 0; i < RX_CNT; i++) {
-+		if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			printk("rx: buf %d full\n", i);
-+		rxhostdesc++;
-+	}
-+}
-+#endif
-+
-+static void
-+acxmem_l_process_rxdesc(acx_device_t *adev)
-+{
-+	register rxhostdesc_t *hostdesc;
-+	register rxdesc_t *rxdesc;
-+	unsigned count, tail;
-+	u32 addr;
-+	u8 Ctl_8;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(acx_debug & L_BUFR))
-+		log_rxbuffer(adev);
-+
-+	/* First, have a loop to determine the first descriptor that's
-+	 * full, just in case there's a mismatch between our current
-+	 * rx_tail and the full descriptor we're supposed to handle. */
-+	tail = adev->rx_tail;
-+	count = RX_CNT;
-+	while (1) {
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		rxdesc = &adev->rxdesc_start[tail];
-+		/* advance tail regardless of outcome of the below test */
-+		tail = (tail + 1) % RX_CNT;
-+
-+		/*
-+		 * Unlike the PCI interface, where the ACX can write directly to
-+		 * the host descriptors, on the slave memory interface we have to
-+		 * pull these.  All we really need to do is check the Ctl_8 field
-+		 * in the rx descriptor on the ACX, which should be 0x11000000 if
-+		 * we should process it.
-+		 */
-+		Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+                if ((Ctl_8 & DESC_CTL_HOSTOWN) &&
-+		    (Ctl_8 & DESC_CTL_ACXDONE))
-+		  break;		/* found it! */
-+
-+		if (unlikely(!--count))	/* hmm, no luck: all descs empty, bail out */
-+			goto end;
-+	}
-+
-+	/* now process descriptors, starting with the first we figured out */
-+	while (1) {
-+		log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n",	tail, Ctl_8);
-+		/*
-+		 * If the ACX has CTL_RECLAIM set on this descriptor there
-+		 * is no buffer associated; it just wants us to tell it to
-+		 * reclaim the memory.
-+		 */
-+		if (!(Ctl_8 & DESC_CTL_RECLAIM)) {
-+
-+		  /*
-+		 * slave interface - pull data now
-+		 */
-+		hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length));
-+
-+		/*
-+		 * hostdesc->data is an rxbuffer_t, which includes header information,
-+		 * but the length in the data packet doesn't.  The header information
-+		 * takes up an additional 12 bytes, so add that to the length we copy.
-+		 */
-+		addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr));
-+		  if (addr) {
-+		    /*
-+		     * How can &(rxdesc->ACXMemPtr) above ever be zero?  Looks like we
-+		     * get that now and then - try to trap it for debug.
-+		     */
-+		    if (addr & 0xffff0000) {
-+		      printk("rxdesc 0x%08x\n", (u32) rxdesc);
-+		      dump_acxmem (adev, 0, 0x10000);
-+		      panic ("Bad access!");
-+		    }
-+		  chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr,
-+					   hostdesc->length +
-+					   (u32) &((rxbuffer_t *)0)->hdr_a3);
-+		acx_l_process_rxbuf(adev, hostdesc->data);
-+		  }
-+		}
-+		else {
-+		  printk ("rx reclaim only!\n");
-+		}
-+
-+		hostdesc->Status = 0;
-+
-+		/*
-+		 * Let the ACX know we're done.
-+		 */
-+		CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN);
-+                SET_BIT (Ctl_8, DESC_CTL_HOSTDONE);
-+		SET_BIT (Ctl_8, DESC_CTL_RECLAIM);
-+		write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8);
-+
-+		/*
-+		 * Now tell the ACX we've finished with the receive buffer so 
-+		 * it can finish the reclaim.
-+		 */
-+		write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC);
-+
-+		/* ok, descriptor is handled, now check the next descriptor */
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		rxdesc = &adev->rxdesc_start[tail];
-+
-+		Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+
-+		/* if next descriptor is empty, then bail out */
-+		if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE))
-+			break;
-+
-+		tail = (tail + 1) % RX_CNT;
-+	}
-+end:
-+	adev->rx_tail = tail;
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_i_interrupt
-+**
-+** IRQ handler (atomic context, must not sleep, blah, blah)
-+*/
-+
-+/* scan is complete. all frames now on the receive queue are valid */
-+#define INFO_SCAN_COMPLETE      0x0001
-+#define INFO_WEP_KEY_NOT_FOUND  0x0002
-+/* hw has been reset as the result of a watchdog timer timeout */
-+#define INFO_WATCH_DOG_RESET    0x0003
-+/* failed to send out NULL frame from PS mode notification to AP */
-+/* recommended action: try entering 802.11 PS mode again */
-+#define INFO_PS_FAIL            0x0004
-+/* encryption/decryption process on a packet failed */
-+#define INFO_IV_ICV_FAILURE     0x0005
-+
-+/* Info mailbox format:
-+2 bytes: type
-+2 bytes: status
-+more bytes may follow
-+    rumors say about status:
-+	0x0000 info available (set by hw)
-+	0x0001 information received (must be set by host)
-+	0x1000 info available, mailbox overflowed (messages lost) (set by hw)
-+    but in practice we've seen:
-+	0x9000 when we did not set status to 0x0001 on prev message
-+	0x1001 when we did set it
-+	0x0000 was never seen
-+    conclusion: this is really a bitfield:
-+    0x1000 is 'info available' bit
-+    'mailbox overflowed' bit is 0x8000, not 0x1000
-+    value of 0x0000 probably means that there are no messages at all
-+    P.S. I dunno how in hell hw is supposed to notice that messages are lost -
-+    it does NOT clear bit 0x0001, and this bit will probably stay forever set
-+    after we set it once. Let's hope this will be fixed in firmware someday
-+*/
-+
-+static void
-+handle_info_irq(acx_device_t *adev)
-+{
-+#if ACX_DEBUG
-+	static const char * const info_type_msg[] = {
-+		"(unknown)",
-+		"scan complete",
-+		"WEP key not found",
-+		"internal watchdog reset was done",
-+		"failed to send powersave (NULL frame) notification to AP",
-+		"encrypt/decrypt on a packet has failed",
-+		"TKIP tx keys disabled",
-+		"TKIP rx keys disabled",
-+		"TKIP rx: key ID not found",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"TKIP IV value exceeds thresh"
-+	};
-+#endif
-+	u32 info_type, info_status;
-+
-+	info_type = read_slavemem32 (adev, (u32) adev->info_area);
-+
-+	info_status = (info_type >> 16);
-+	info_type = (u16)info_type;
-+
-+	/* inform fw that we have read this info message */
-+	write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000);
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK);
-+	write_flush(adev);
-+
-+	log(L_CTL, "info_type:%04X info_status:%04X\n",
-+			info_type, info_status);
-+
-+	log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n",
-+		info_status, info_type,
-+		info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ?
-+				0 : info_type]
-+	);
-+}
-+
-+
-+static void
-+log_unusual_irq(u16 irqtype) {
-+	/*
-+	if (!printk_ratelimit())
-+		return;
-+	*/
-+
-+	printk("acx: got");
-+	if (irqtype & HOST_INT_TX_XFER) {
-+		printk(" Tx_Xfer");
-+	}
-+	if (irqtype & HOST_INT_RX_COMPLETE) {
-+		printk(" Rx_Complete");
-+	}
-+	if (irqtype & HOST_INT_DTIM) {
-+		printk(" DTIM");
-+	}
-+	if (irqtype & HOST_INT_BEACON) {
-+		printk(" Beacon");
-+	}
-+	if (irqtype & HOST_INT_TIMER) {
-+		log(L_IRQ, " Timer");
-+	}
-+	if (irqtype & HOST_INT_KEY_NOT_FOUND) {
-+		printk(" Key_Not_Found");
-+	}
-+	if (irqtype & HOST_INT_IV_ICV_FAILURE) {
-+		printk(" IV_ICV_Failure (crypto)");
-+	}
-+		/* HOST_INT_CMD_COMPLETE  */
-+		/* HOST_INT_INFO          */
-+	if (irqtype & HOST_INT_OVERFLOW) {
-+		printk(" Overflow");
-+	}
-+	if (irqtype & HOST_INT_PROCESS_ERROR) {
-+		printk(" Process_Error");
-+	}
-+		/* HOST_INT_SCAN_COMPLETE */
-+	if (irqtype & HOST_INT_FCS_THRESHOLD) {
-+		printk(" FCS_Threshold");
-+	}
-+	if (irqtype & HOST_INT_UNKNOWN) {
-+		printk(" Unknown");
-+	}
-+	printk(" IRQ(s)\n");
-+}
-+
-+
-+static void
-+update_link_quality_led(acx_device_t *adev)
-+{
-+	int qual;
-+
-+	qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise);
-+	if (qual > adev->brange_max_quality)
-+		qual = adev->brange_max_quality;
-+
-+	if (time_after(jiffies, adev->brange_time_last_state_change +
-+				(HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) {
-+		acxmem_l_power_led(adev, (adev->brange_last_state == 0));
-+		adev->brange_last_state ^= 1; /* toggle */
-+		adev->brange_time_last_state_change = jiffies;
-+	}
-+}
-+
-+
-+#define MAX_IRQLOOPS_PER_JIFFY  (20000/HZ) /* a la orinoco.c */
-+
-+static irqreturn_t
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxmem_i_interrupt(int irq, void *dev_id)
-+#else
-+acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	unsigned long flags;
-+	unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY;
-+	register u16 irqtype;
-+	u16 unmasked;
-+
-+	adev = ndev2adev((struct net_device*)dev_id);
-+
-+	/* LOCKING: can just spin_lock() since IRQs are disabled anyway.
-+	 * I am paranoid */
-+	acx_lock(adev, flags);
-+
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	if (unlikely(0xffff == unmasked)) {
-+		/* 0xffff value hints at missing hardware,
-+		 * so don't do anything.
-+		 * Not very clean, but other drivers do the same... */
-+		log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n");
-+		goto none;
-+	}
-+
-+	/* We will check only "interesting" IRQ types */
-+	irqtype = unmasked & ~adev->irq_mask;
-+	if (!irqtype) {
-+		/* We are on a shared IRQ line and it wasn't our IRQ */
-+		log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n",
-+			unmasked, adev->irq_mask);
-+		goto none;
-+	}
-+
-+	/* Done here because IRQ_NONEs taking three lines of log
-+	** drive me crazy */
-+	FN_ENTER;
-+
-+#define IRQ_ITERATE 1
-+#if IRQ_ITERATE
-+if (jiffies != adev->irq_last_jiffies) {
-+	adev->irq_loops_this_jiffy = 0;
-+	adev->irq_last_jiffies = jiffies;
-+}
-+
-+/* safety condition; we'll normally abort loop below
-+ * in case no IRQ type occurred */
-+while (likely(--irqcount)) {
-+#endif
-+	/* ACK all IRQs ASAP */
-+	write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff);
-+
-+	log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n",
-+				unmasked, adev->irq_mask, irqtype);
-+
-+	/* Handle most important IRQ types first */
-+	if (irqtype & HOST_INT_RX_DATA) {
-+		log(L_IRQ, "got Rx_Data IRQ\n");
-+		acxmem_l_process_rxdesc(adev);
-+	}
-+	if (irqtype & HOST_INT_TX_COMPLETE) {
-+		log(L_IRQ, "got Tx_Complete IRQ\n");
-+		/* don't clean up on each Tx complete, wait a bit
-+		 * unless we're going towards full, in which case
-+		 * we do it immediately, too (otherwise we might lockup
-+		 * with a full Tx buffer if we go into
-+		 * acxmem_l_clean_txdesc() at a time when we won't wakeup
-+		 * the net queue in there for some reason...) */
-+		if (adev->tx_free <= TX_START_CLEAN) {
-+#if TX_CLEANUP_IN_SOFTIRQ
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP);
-+#else
-+			acxmem_l_clean_txdesc(adev);
-+#endif
-+		}
-+	}
-+
-+	/* Less frequent ones */
-+	if (irqtype & (0
-+		| HOST_INT_CMD_COMPLETE
-+		| HOST_INT_INFO
-+		| HOST_INT_SCAN_COMPLETE
-+	)) {
-+		if (irqtype & HOST_INT_CMD_COMPLETE) {
-+			log(L_IRQ, "got Command_Complete IRQ\n");
-+			/* save the state for the running issue_cmd() */
-+			SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE);
-+		}
-+		if (irqtype & HOST_INT_INFO) {
-+			handle_info_irq(adev);
-+		}
-+		if (irqtype & HOST_INT_SCAN_COMPLETE) {
-+			log(L_IRQ, "got Scan_Complete IRQ\n");
-+			/* need to do that in process context */
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN);
-+			/* remember that fw is not scanning anymore */
-+			SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+		}
-+	}
-+
-+	/* These we just log, but either they happen rarely
-+	 * or we keep them masked out */
-+	if (irqtype & (0
-+		/* | HOST_INT_RX_DATA */
-+		/* | HOST_INT_TX_COMPLETE   */
-+		| HOST_INT_TX_XFER
-+		| HOST_INT_RX_COMPLETE
-+		| HOST_INT_DTIM
-+		| HOST_INT_BEACON
-+		| HOST_INT_TIMER
-+		| HOST_INT_KEY_NOT_FOUND
-+		| HOST_INT_IV_ICV_FAILURE
-+		/* | HOST_INT_CMD_COMPLETE  */
-+		/* | HOST_INT_INFO          */
-+		| HOST_INT_OVERFLOW
-+		| HOST_INT_PROCESS_ERROR
-+		/* | HOST_INT_SCAN_COMPLETE */
-+		| HOST_INT_FCS_THRESHOLD
-+		| HOST_INT_UNKNOWN
-+	)) {
-+		log_unusual_irq(irqtype);
-+	}
-+
-+#if IRQ_ITERATE
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	irqtype = unmasked & ~adev->irq_mask;
-+	/* Bail out if no new IRQ bits or if all are masked out */
-+	if (!irqtype)
-+		break;
-+
-+	if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) {
-+		printk(KERN_ERR "acx: too many interrupts per jiffy!\n");
-+		/* Looks like card floods us with IRQs! Try to stop that */
-+		write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+		/* This will short-circuit all future attempts to handle IRQ.
-+		 * We cant do much more... */
-+		adev->irq_mask = 0;
-+		break;
-+	}
-+}
-+#endif
-+	/* Routine to perform blink with range */
-+	if (unlikely(adev->led_power == 2))
-+		update_link_quality_led(adev);
-+
-+/* handled: */
-+	/* write_flush(adev); - not needed, last op was read anyway */
-+	acx_unlock(adev, flags);
-+	FN_EXIT0;
-+	return IRQ_HANDLED;
-+
-+none:
-+	acx_unlock(adev, flags);
-+	return IRQ_NONE;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_power_led
-+*/
-+void
-+acxmem_l_power_led(acx_device_t *adev, int enable)
-+{
-+	u16 gpio_pled =	IS_ACX111(adev) ? 0x0040 : 0x0800;
-+
-+	/* A hack. Not moving message rate limiting to adev->xxx
-+	 * (it's only a debug message after all) */
-+	static int rate_limit = 0;
-+
-+	if (rate_limit++ < 3)
-+		log(L_IOCTL, "Please report in case toggling the power "
-+				"LED doesn't work for your card!\n");
-+	if (enable)
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled);
-+	else
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled);
-+}
-+
-+
-+/***********************************************************************
-+** Ioctls
-+*/
-+
-+/***********************************************************************
-+*/
-+int
-+acx111pci_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+#if ACX_DEBUG > 1
-+	acx_device_t *adev = ndev2adev(ndev);
-+	rxdesc_t *rxdesc;
-+	txdesc_t *txdesc;
-+	rxhostdesc_t *rxhostdesc;
-+	txhostdesc_t *txhostdesc;
-+	struct acx111_ie_memoryconfig memconf;
-+	struct acx111_ie_queueconfig queueconf;
-+	unsigned long flags;
-+	int i;
-+	char memmap[0x34];
-+	char rxconfig[0x8];
-+	char fcserror[0x8];
-+	char ratefallback[0x5];
-+
-+	if ( !(acx_debug & (L_IOCTL|L_DEBUG)) )
-+		return OK;
-+	/* using printk() since we checked debug flag already */
-+
-+	acx_sem_lock(adev);
-+
-+	if (!IS_ACX111(adev)) {
-+		printk("acx111-specific function called "
-+			"with non-acx111 chip, aborting\n");
-+		goto end_ok;
-+	}
-+
-+	/* get Acx111 Memory Configuration */
-+	memset(&memconf, 0, sizeof(memconf));
-+	/* BTW, fails with 12 (Write only) error code.
-+	** Retained for easy testing of issue_cmd error handling :) */
-+	printk ("Interrogating queue config\n");
-+	acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG);
-+	printk ("done with queue config\n");
-+
-+	/* get Acx111 Queue Configuration */
-+	memset(&queueconf, 0, sizeof(queueconf));
-+	printk ("Interrogating mem config options\n");
-+	acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS);
-+	printk ("done with mem config options\n");
-+
-+	/* get Acx111 Memory Map */
-+	memset(memmap, 0, sizeof(memmap));
-+	printk ("Interrogating mem map\n");
-+	acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP);
-+	printk ("done with mem map\n");
-+
-+	/* get Acx111 Rx Config */
-+	memset(rxconfig, 0, sizeof(rxconfig));
-+	printk ("Interrogating rxconfig\n");
-+	acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG);
-+	printk ("done with queue rxconfig\n");
-+
-+	/* get Acx111 fcs error count */
-+	memset(fcserror, 0, sizeof(fcserror));
-+	printk ("Interrogating fcs err count\n");
-+	acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT);
-+	printk ("done with err count\n");
-+
-+	/* get Acx111 rate fallback */
-+	memset(ratefallback, 0, sizeof(ratefallback));
-+	printk ("Interrogating rate fallback\n");
-+	acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK);
-+	printk ("done with rate fallback\n");
-+
-+	/* force occurrence of a beacon interrupt */
-+	/* TODO: comment why is this necessary */
-+	write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON);
-+
-+	/* dump Acx111 Mem Configuration */
-+	printk("dump mem config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Number of stations: %1X\n"
-+		"Memory block size: %1X\n"
-+		"tx/rx memory block allocation: %1X\n"
-+		"count rx: %X / tx: %X queues\n"
-+		"options %1X\n"
-+		"fragmentation %1X\n"
-+		"Rx Queue 1 Count Descriptors: %X\n"
-+		"Rx Queue 1 Host Memory Start: %X\n"
-+		"Tx Queue 1 Count Descriptors: %X\n"
-+		"Tx Queue 1 Attributes: %X\n",
-+		memconf.len, (int) sizeof(memconf),
-+		memconf.no_of_stations,
-+		memconf.memory_block_size,
-+		memconf.tx_rx_memory_block_allocation,
-+		memconf.count_rx_queues, memconf.count_tx_queues,
-+		memconf.options,
-+		memconf.fragmentation,
-+		memconf.rx_queue1_count_descs,
-+	acx2cpu(memconf.rx_queue1_host_rx_start),
-+		memconf.tx_queue1_count_descs,
-+		memconf.tx_queue1_attributes);
-+
-+	/* dump Acx111 Queue Configuration */
-+	printk("dump queue head:\n"
-+		"data read: %d, struct size: %d\n"
-+		"tx_memory_block_address (from card): %X\n"
-+		"rx_memory_block_address (from card): %X\n"
-+		"rx1_queue address (from card): %X\n"
-+		"tx1_queue address (from card): %X\n"
-+		"tx1_queue attributes (from card): %X\n",
-+		queueconf.len, (int) sizeof(queueconf),
-+		queueconf.tx_memory_block_address,
-+		queueconf.rx_memory_block_address,
-+		queueconf.rx1_queue_address,
-+		queueconf.tx1_queue_address,
-+		queueconf.tx1_attributes);
-+
-+	/* dump Acx111 Mem Map */
-+	printk("dump mem map:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Code start: %X\n"
-+		"Code end: %X\n"
-+		"WEP default key start: %X\n"
-+		"WEP default key end: %X\n"
-+		"STA table start: %X\n"
-+		"STA table end: %X\n"
-+		"Packet template start: %X\n"
-+		"Packet template end: %X\n"
-+		"Queue memory start: %X\n"
-+		"Queue memory end: %X\n"
-+		"Packet memory pool start: %X\n"
-+		"Packet memory pool end: %X\n"
-+		"iobase: %p\n"
-+		"iobase2: %p\n",
-+		*((u16 *)&memmap[0x02]), (int) sizeof(memmap),
-+		*((u32 *)&memmap[0x04]),
-+		*((u32 *)&memmap[0x08]),
-+		*((u32 *)&memmap[0x0C]),
-+		*((u32 *)&memmap[0x10]),
-+		*((u32 *)&memmap[0x14]),
-+		*((u32 *)&memmap[0x18]),
-+		*((u32 *)&memmap[0x1C]),
-+		*((u32 *)&memmap[0x20]),
-+		*((u32 *)&memmap[0x24]),
-+		*((u32 *)&memmap[0x28]),
-+		*((u32 *)&memmap[0x2C]),
-+		*((u32 *)&memmap[0x30]),
-+		adev->iobase,
-+		adev->iobase2);
-+
-+	/* dump Acx111 Rx Config */
-+	printk("dump rx config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"rx config: %X\n"
-+		"rx filter config: %X\n",
-+		*((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig),
-+		*((u16 *)&rxconfig[0x04]),
-+		*((u16 *)&rxconfig[0x06]));
-+
-+	/* dump Acx111 fcs error */
-+	printk("dump fcserror:\n"
-+		"data read: %d, struct size: %d\n"
-+		"fcserrors: %X\n",
-+		*((u16 *)&fcserror[0x02]), (int) sizeof(fcserror),
-+		*((u32 *)&fcserror[0x04]));
-+
-+	/* dump Acx111 rate fallback */
-+	printk("dump rate fallback:\n"
-+		"data read: %d, struct size: %d\n"
-+		"ratefallback: %X\n",
-+		*((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback),
-+		*((u8 *)&ratefallback[0x04]));
-+
-+	/* protect against IRQ */
-+	acx_lock(adev, flags);
-+
-+	/* dump acx111 internal rx descriptor ring buffer */
-+	rxdesc = adev->rxdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump internal rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n"
-+			"RxStatus (dynamic) 0x%X\n"
-+			"Mod/Pre (dynamic) 0x%X\n",
-+			i,
-+			rxdesc,
-+			acx2cpu(rxdesc->pNextDesc),
-+			acx2cpu(rxdesc->ACXMemPtr),
-+			rxdesc->Ctl_8,
-+			rxdesc->rate,
-+			rxdesc->error,
-+			rxdesc->SNR);
-+		rxdesc++;
-+	}
-+
-+	/* dump host rx descriptor ring buffer */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxhostdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump host rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			rxhostdesc,
-+			acx2cpu(rxhostdesc->data_phy),
-+			rxhostdesc->data_offset,
-+			le16_to_cpu(rxhostdesc->Ctl_16),
-+			le16_to_cpu(rxhostdesc->length),
-+			acx2cpu(rxhostdesc->desc_phy_next),
-+			rxhostdesc->Status);
-+		rxhostdesc++;
-+	}
-+
-+	/* dump acx111 internal tx descriptor ring buffer */
-+	txdesc = adev->txdesc_start;
-+
-+	/* loop over complete transmit pool */
-+	if (txdesc) for (i = 0; i < TX_CNT; i++) {
-+		printk("\ndump internal txdesc %d:\n"
-+			"size 0x%X\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"host mem pointer (dynamic) 0x%X\n"
-+			"length (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"CTL2 (dynamic) 0x%X\n"
-+			"Status (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n",
-+			i,
-+			(int) sizeof(struct txdesc),
-+			txdesc,
-+			acx2cpu(txdesc->pNextDesc),
-+			acx2cpu(txdesc->AcxMemPtr),
-+			acx2cpu(txdesc->HostMemPtr),
-+			le16_to_cpu(txdesc->total_length),
-+			txdesc->Ctl_8,
-+			txdesc->Ctl2_8, txdesc->error,
-+			txdesc->u.r1.rate);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+
-+	/* dump host tx descriptor ring buffer */
-+
-+	txhostdesc = adev->txhostdesc_start;
-+
-+	/* loop over complete host send pool */
-+	if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) {
-+		printk("\ndump host txdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			txhostdesc,
-+			acx2cpu(txhostdesc->data_phy),
-+			txhostdesc->data_offset,
-+			le16_to_cpu(txhostdesc->Ctl_16),
-+			le16_to_cpu(txhostdesc->length),
-+			acx2cpu(txhostdesc->desc_phy_next),
-+			le32_to_cpu(txhostdesc->Status));
-+		txhostdesc++;
-+	}
-+
-+	/* write_reg16(adev, 0xb4, 0x4); */
-+
-+	acx_unlock(adev, flags);
-+end_ok:
-+
-+	acx_sem_unlock(adev);
-+#endif /* ACX_DEBUG */
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100mem_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	u16 gpio_old;
-+
-+	if (!IS_ACX100(adev)) {
-+		/* WARNING!!!
-+		 * Removing this check *might* damage
-+		 * hardware, since we're tweaking GPIOs here after all!!!
-+		 * You've been warned...
-+		 * WARNING!!! */
-+		printk("acx: sorry, setting bias level for non-acx100 "
-+			"is not supported yet\n");
-+		return OK;
-+	}
-+
-+	if (*extra > 7)	{
-+		printk("acx: invalid bias parameter, range is 0-7\n");
-+		return -EINVAL;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	/* Need to lock accesses to [IO_ACX_GPIO_OUT]:
-+	 * IRQ handler uses it to update LED */
-+	acx_lock(adev, flags);
-+	gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT);
-+	write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8));
-+	acx_unlock(adev, flags);
-+
-+	log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old);
-+	printk("%s: PHY power amplifier bias: old:%d, new:%d\n",
-+		ndev->name,
-+		(gpio_old & 0x0700) >> 8, (unsigned char)*extra);
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+/***************************************************************
-+** acxmem_l_alloc_tx
-+** Actually returns a txdesc_t* ptr
-+**
-+** FIXME: in case of fragments, should allocate multiple descrs
-+** after figuring out how many we need and whether we still have
-+** sufficiently many.
-+*/
-+tx_t*
-+acxmem_l_alloc_tx(acx_device_t *adev)
-+{
-+	struct txdesc *txdesc;
-+	unsigned head;
-+	u8 ctl8;
-+	static int txattempts = 0;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!adev->tx_free)) {
-+		printk("acx: BUG: no free txdesc left\n");
-+		/*
-+		 * Probably the ACX ignored a transmit attempt and now there's a packet
-+		 * sitting in the queue we think should be transmitting but the ACX doesn't
-+		 * know about.
-+		 * On the first pass, send the ACX a TxProc interrupt to try moving
-+		 * things along, and if that doesn't work (ie, we get called again) completely
-+		 * flush the transmit queue.
-+		 */
-+		if (txattempts < 10) {
-+		  txattempts++;
-+		  printk ("acx: trying to wake up ACX\n");
-+		  write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+		  write_flush(adev);		}
-+		else  {
-+		  txattempts = 0;
-+		  printk ("acx: flushing transmit queue.\n");
-+		  acxmem_l_clean_txdesc_emergency (adev);
-+		}
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/*
-+	 * Make a quick check to see if there is transmit buffer space on
-+	 * the ACX.  This can't guarantee there is enough space for the packet
-+	 * since we don't yet know how big it is, but it will prevent at least some
-+	 * annoyances.
-+	 */
-+	if (!adev->acx_txbuf_blocks_free) {
-+	  txdesc = NULL;
-+	  goto end;
-+	}
-+
-+	head = adev->tx_head;
-+	/*
-+	 * txdesc points to ACX memory
-+	 */
-+	txdesc = get_txdesc(adev, head);
-+	ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+
-+	/* 
-+	 * If we don't own the buffer (HOSTOWN) it is certainly not free; however,
-+	 * we may have previously thought we had enough memory to send
-+	 * a packet, allocated the buffer then gave up when we found not enough
-+	 * transmit buffer space on the ACX. In that case, HOSTOWN and
-+	 * ACXDONE will both be set.
-+	 */
-+	if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) {
-+		/* whoops, descr at current index is not free, so probably
-+		 * ring buffer already full */
-+                printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find "
-+                        "free txdesc\n", head, ctl8);
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/* Needed in case txdesc won't be eventually submitted for tx */
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN);
-+
-+	adev->tx_free--;
-+	log(L_BUFT, "tx: got desc %u, %u remain\n",
-+			head, adev->tx_free);
-+	/* Keep a few free descs between head and tail of tx ring.
-+	** It is not absolutely needed, just feels safer */
-+	if (adev->tx_free < TX_STOP_QUEUE) {
-+		log(L_BUF, "stop queue (%u tx desc left)\n",
-+				adev->tx_free);
-+		acx_stop_queue(adev->ndev, NULL);
-+	}
-+
-+	/* returning current descriptor, so advance to next free one */
-+	adev->tx_head = (head + 1) % TX_CNT;
-+end:
-+	FN_EXIT0;
-+
-+	return (tx_t*)txdesc;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_l_dealloc_tx
-+** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque);
-+ transmit descriptor.  The ACX
-+** can get confused if we skip transmit descriptors in the queue,
-+** so when we don't need a descriptor return it to its original
-+** state and move the queue head pointer back.
-+**
-+*/
-+void
-+acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque)
-+{
-+  /*
-+   * txdesc is the address of the descriptor on the ACX.
-+   */
-+  txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+  txdesc_t tmptxdesc;
-+  int index;
-+
-+  memset (&tmptxdesc, 0, sizeof(tmptxdesc));
-+  tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG;
-+  tmptxdesc.u.r1.rate = 0x0a;
-+
-+  /*
-+   * Clear out all of the transmit descriptor except for the next pointer
-+   */
-+  copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr),
-+		    (u8 *) &(tmptxdesc.HostMemPtr),
-+		    sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc));
-+  
-+  /*
-+   * This is only called immediately after we've allocated, so we should
-+   * be able to set the head back to this descriptor.
-+   */
-+  index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size;
-+  printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index);
-+  adev->tx_head = index;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void*
-+acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque)
-+{
-+	return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_tx_data
-+**
-+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx).
-+** Can be called from acx_i_start_xmit (data frames from net core).
-+**
-+** FIXME: in case of fragments, should loop over the number of
-+** pre-allocated tx descrs, properly setting up transfer data and
-+** CTL_xxx flags according to fragment number.
-+*/
-+void
-+acxmem_update_queue_indicator (acx_device_t *adev, int txqueue)
-+{
-+#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE
-+  u32 indicator;
-+  unsigned long flags;
-+  int count;
-+
-+  /*
-+   * Can't handle an interrupt while we're fiddling with the ACX's lock,
-+   * according to TI.  The ACX is supposed to hold fw_lock for at most
-+   * 500ns.
-+   */
-+  local_irq_save (flags);
-+
-+  /*
-+   * Wait for ACX to release the lock (at most 500ns).
-+   */
-+  count = 0;
-+  while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock))
-+	 && (count++ < 50)) {
-+    ndelay (10);
-+  }
-+  if (count < 50) {
-+
-+    /*
-+     * Take out the host lock - anything non-zero will work, so don't worry about
-+     * be/le
-+     */
-+    write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1);
-+
-+    /*
-+     * Avoid a race condition
-+     */
-+    count = 0;
-+    while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock))
-+	   && (count++ < 50)) {
-+      ndelay (10);
-+    }
-+
-+    if (count < 50) {
-+      /*
-+       * Mark the queue active
-+       */
-+      indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator));
-+      indicator |= cpu_to_le32 (1 << txqueue);
-+      write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator);
-+    }
-+
-+    /*
-+     * Release the host lock
-+     */
-+    write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0);
-+
-+  }
-+
-+  /*
-+   * Restore interrupts
-+   */
-+  local_irq_restore (flags);
-+#endif
-+}
-+
-+void
-+acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len)
-+{
-+  /*
-+   * txdesc is the address on the ACX
-+   */
-+	txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+	txhostdesc_t *hostdesc1, *hostdesc2;
-+	client_t *clt;
-+	u16 rate_cur;
-+	u8 Ctl_8, Ctl2_8;
-+	u32 addr;
-+
-+	FN_ENTER;
-+	/* fw doesn't tx such packets anyhow */
-+	if (unlikely(len < WLAN_HDR_A3_LEN))
-+		goto end;
-+
-+	hostdesc1 = get_txhostdesc(adev, txdesc);
-+	/* modify flag status in separate variable to be able to write it back
-+	 * in one big swoop later (also in order to have less device memory
-+	 * accesses) */
-+	Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+	Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */
-+
-+	hostdesc2 = hostdesc1 + 1;
-+
-+	/* DON'T simply set Ctl field to 0 here globally,
-+	 * it needs to maintain a consistent flag status (those are state flags!!),
-+	 * otherwise it may lead to severe disruption. Only set or reset particular
-+	 * flags at the exact moment this is needed... */
-+
-+	/* let chip do RTS/CTS handshaking before sending
-+	 * in case packet size exceeds threshold */
-+	if (len > adev->rts_threshold)
-+		SET_BIT(Ctl2_8, DESC_CTL2_RTS);
-+	else
-+		CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_3_AP:
-+		clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1);
-+		break;
-+	case ACX_MODE_2_STA:
-+		clt = adev->ap_client;
-+		break;
-+#if 0
-+/* testing was done on acx111: */
-+	case ACX_MODE_MONITOR:
-+		SET_BIT(Ctl2_8, 0
-+/* sends CTS to self before packet */
-+			+ DESC_CTL2_SEQ		/* don't increase sequence field */
-+/* not working (looks like good fcs is still added) */
-+			+ DESC_CTL2_FCS		/* don't add the FCS */
-+/* not tested */
-+			+ DESC_CTL2_MORE_FRAG
-+/* not tested */
-+			+ DESC_CTL2_RETRY	/* don't increase retry field */
-+/* not tested */
-+			+ DESC_CTL2_POWER	/* don't increase power mgmt. field */
-+/* no effect */
-+			+ DESC_CTL2_WEP		/* encrypt this frame */
-+/* not tested */
-+			+ DESC_CTL2_DUR		/* don't increase duration field */
-+			);
-+		/* fallthrough */
-+#endif
-+	default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */
-+		clt = NULL;
-+		break;
-+	}
-+
-+	rate_cur = clt ? clt->rate_cur : adev->rate_bcast;
-+	if (unlikely(!rate_cur)) {
-+		printk("acx: driver bug! bad ratemask\n");
-+		goto end;
-+	}
-+
-+	/* used in tx cleanup routine for auto rate and accounting: */
-+	put_txcr(adev, txdesc, clt, rate_cur);
-+
-+	write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len));
-+	hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN);
-+	if (IS_ACX111(adev)) {
-+		/* note that if !txdesc->do_auto, txrate->cur
-+		** has only one nonzero bit */
-+		txdesc->u.r2.rate111 = cpu_to_le16(
-+			rate_cur
-+			/* WARNING: I was never able to make it work with prism54 AP.
-+			** It was falling down to 1Mbit where shortpre is not applicable,
-+			** and not working at all at "5,11 basic rates only" setting.
-+			** I even didn't see tx packets in radio packet capture.
-+			** Disabled for now --vda */
-+			/*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */
-+			);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+			/* should add this to rate111 above as necessary */
-+			| (clt->pbcc511 ? RATE111_PBCC511 : 0)
-+#endif
-+		hostdesc1->length = cpu_to_le16(len);
-+	} else { /* ACX100 */
-+		u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100;
-+		write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+		if (clt->pbcc511) {
-+			if (n == RATE100_5 || n == RATE100_11)
-+				n |= RATE100_PBCC511;
-+		}
-+
-+		if (clt->shortpre && (clt->cur != RATE111_1))
-+			SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */
-+#endif
-+		/* set autodma and reclaim and 1st mpdu */
-+		SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG);
-+
-+#if ACX_FRAGMENTATION
-+		/* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */
-+#endif
-+		hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN);
-+
-+		/*
-+		 * Since we're not using autodma copy the packet data to the acx now.
-+		 * Even host descriptors point to the packet header, and the odd indexed
-+		 * descriptor following points to the packet data.
-+		 *
-+		 * The first step is to find free memory in the ACX transmit buffers.
-+		 * They don't necessarily map one to one with the transmit queue entries,
-+		 * so search through them starting just after the last one used.
-+		 */
-+		addr = allocate_acx_txbuf_space (adev, len);
-+		if (addr) {
-+		  chaincopy_to_slavemem (adev, addr, hostdesc1->data, len);
-+		}
-+		else {
-+		  /*
-+		   * Bummer.  We thought we might have enough room in the transmit
-+		   * buffers to send this packet, but it turns out we don't.  alloc_tx
-+		   * has already marked this transmit descriptor as HOSTOWN and ACXDONE,
-+		   * which means the ACX will hang when it gets to this descriptor unless
-+		   * we do something about it.  Having a bubble in the transmit queue just
-+		   * doesn't seem to work, so we have to reset this transmit queue entry's
-+		   * state to its original value and back up our head pointer to point
-+		   * back to this entry.
-+		   */
-+		  hostdesc1->length = 0;
-+		  hostdesc2->length = 0;
-+		  write_slavemem16 (adev, (u32) &(txdesc->total_length), 0);
-+		  write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG);
-+		  adev->tx_head  = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size;
-+		  goto end;
-+		}
-+		/*
-+		 * Tell the ACX where the packet is.
-+		 */
-+		write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr);
-+
-+	}
-+	/* don't need to clean ack/rts statistics here, already
-+	 * done on descr cleanup */
-+
-+	/* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors
-+	 * are now owned by the acx100; do this as LAST operation */
-+	CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN);
-+	/* flush writes before we release hostdesc to the adapter here */
-+	//wmb();
-+
-+	/* write back modified flags */
-+	/*
-+	 * At this point Ctl_8 should just be FIRSTFRAG
-+	 */
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8);
-+	write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8);
-+	/* unused: txdesc->tx_time = cpu_to_le32(jiffies); */
-+
-+	/*
-+	 * Update the queue indicator to say there's data on the first queue.
-+	 */
-+	acxmem_update_queue_indicator (adev, 0);
-+
-+	/* flush writes before we tell the adapter that it's its turn now */
-+	mmiowb();
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+	write_flush(adev);
-+
-+	/* log the packet content AFTER sending it,
-+	 * in order to not delay sending any further than absolutely needed
-+	 * Do separate logs for acx100/111 to have human-readable rates */
-+	if (unlikely(acx_debug & (L_XFER|L_DATA))) {
-+		u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc;
-+		if (IS_ACX111(adev))
-+			printk("tx: pkt (%s): len %d "
-+				"rate %04X%s status %u\n",
-+				acx_get_packet_type_string(le16_to_cpu(fc)), len,
-+				le16_to_cpu(txdesc->u.r2.rate111),
-+				(le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "",
-+				adev->status);
-+		else
-+			printk("tx: pkt (%s): len %d rate %03u%s status %u\n",
-+				acx_get_packet_type_string(fc), len,
-+				read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)),
-+				(Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "",
-+				adev->status);
-+
-+		if (acx_debug & L_DATA) {
-+			printk("tx: 802.11 [%d]: ", len);
-+			acx_dump_bytes(hostdesc1->data, len);
-+		}
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_l_clean_txdesc
-+**
-+** This function resets the txdescs' status when the ACX100
-+** signals the TX done IRQ (txdescs have been processed), starting with
-+** the pool index of the descriptor which we would use next,
-+** in order to make sure that we can be as fast as possible
-+** in filling new txdescs.
-+** Everytime we get called we know where the next packet to be cleaned is.
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_txbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_txbuffer(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+	u8 Ctl_8;
-+
-+	/* no FN_ENTER here, we don't want that */
-+	/* no locks here, since it's entirely non-critical code */
-+	txdesc = adev->txdesc_start;
-+	if (unlikely(!txdesc)) return;
-+	printk("tx: desc->Ctl8's:");
-+	for (i = 0; i < TX_CNT; i++) {
-+	  Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+		printk(" %02X", Ctl_8);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+	printk("\n");
-+}
-+#endif
-+
-+
-+static void
-+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger)
-+{
-+	const char *err = "unknown error";
-+
-+	/* hmm, should we handle this as a mask
-+	 * of *several* bits?
-+	 * For now I think only caring about
-+	 * individual bits is ok... */
-+	switch (error) {
-+	case 0x01:
-+		err = "no Tx due to error in other fragment";
-+		adev->wstats.discard.fragment++;
-+		break;
-+	case 0x02:
-+		err = "Tx aborted";
-+		adev->stats.tx_aborted_errors++;
-+		break;
-+	case 0x04:
-+		err = "Tx desc wrong parameters";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x08:
-+		err = "WEP key not found";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x10:
-+		err = "MSDU lifetime timeout? - try changing "
-+				"'iwconfig retry lifetime XXX'";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x20:
-+		err = "excessive Tx retries due to either distance "
-+			"too high or unable to Tx or Tx frame error - "
-+			"try changing 'iwconfig txpower XXX' or "
-+			"'sens'itivity or 'retry'";
-+		adev->wstats.discard.retries++;
-+		/* Tx error 0x20 also seems to occur on
-+		 * overheating, so I'm not sure whether we
-+		 * actually want to do aggressive radio recalibration,
-+		 * since people maybe won't notice then that their hardware
-+		 * is slowly getting cooked...
-+		 * Or is it still a safe long distance from utter
-+		 * radio non-functionality despite many radio recalibs
-+		 * to final destructive overheating of the hardware?
-+		 * In this case we really should do recalib here...
-+		 * I guess the only way to find out is to do a
-+		 * potentially fatal self-experiment :-\
-+		 * Or maybe only recalib in case we're using Tx
-+		 * rate auto (on errors switching to lower speed
-+		 * --> less heat?) or 802.11 power save mode?
-+		 *
-+		 * ok, just do it. */
-+		if (++adev->retry_errors_msg_ratelimit % 4 == 0) {
-+			if (adev->retry_errors_msg_ratelimit <= 20) {
-+				printk("%s: several excessive Tx "
-+					"retry errors occurred, attempting "
-+					"to recalibrate radio. Radio "
-+					"drift might be caused by increasing "
-+					"card temperature, please check the card "
-+					"before it's too late!\n",
-+					adev->ndev->name);
-+				if (adev->retry_errors_msg_ratelimit == 20)
-+					printk("disabling above message\n");
-+			}
-+
-+			acx_schedule_task(adev,	ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+		}
-+		break;
-+	case 0x40:
-+		err = "Tx buffer overflow";
-+		adev->stats.tx_fifo_errors++;
-+		break;
-+	case 0x80:
-+		err = "DMA error";
-+		adev->wstats.discard.misc++;
-+		break;
-+	}
-+	adev->stats.tx_errors++;
-+	if (adev->stats.tx_errors <= 20)
-+		printk("%s: tx error 0x%02X, buf %02u! (%s)\n",
-+				adev->ndev->name, error, finger, err);
-+	else
-+		printk("%s: tx error 0x%02X, buf %02u!\n",
-+				adev->ndev->name, error, finger);
-+}
-+
-+
-+unsigned int
-+acxmem_l_clean_txdesc(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	unsigned finger;
-+	int num_cleaned;
-+	u16 r111;
-+	u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8;
-+	u32 acxmem;
-+	txdesc_t tmptxdesc;
-+
-+	FN_ENTER;
-+
-+	/*
-+	 * Set up a template descriptor for re-initialization.  The only
-+	 * things that get set are Ctl_8 and the rate, and the rate defaults
-+	 * to 1Mbps.
-+	 */
-+	memset (&tmptxdesc, 0, sizeof (tmptxdesc));
-+	tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG;
-+	tmptxdesc.u.r1.rate = 0x0a;
-+
-+	if (unlikely(acx_debug & L_DEBUG))
-+		log_txbuffer(adev);
-+
-+	log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail);
-+
-+	/* We know first descr which is not free yet. We advance it as far
-+	** as we see correct bits set in following descs (if next desc
-+	** is NOT free, we shouldn't advance at all). We know that in
-+	** front of tx_tail may be "holes" with isolated free descs.
-+	** We will catch up when all intermediate descs will be freed also */
-+
-+	finger = adev->tx_tail;
-+	num_cleaned = 0;
-+	while (likely(finger != adev->tx_head)) {
-+		txdesc = get_txdesc(adev, finger);
-+
-+		/* If we allocated txdesc on tx path but then decided
-+		** to NOT use it, then it will be left as a free "bubble"
-+		** in the "allocated for tx" part of the ring.
-+		** We may meet it on the next ring pass here. */
-+
-+		/* stop if not marked as "tx finished" and "host owned" */
-+		Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+		if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN)
-+					!= DESC_CTL_ACXDONE_HOSTOWN) {
-+			if (unlikely(!num_cleaned)) { /* maybe remove completely */
-+				log(L_BUFT, "clean_txdesc: tail isn't free. "
-+					"tail:%d head:%d\n",
-+					adev->tx_tail, adev->tx_head);
-+			}
-+			break;
-+		}
-+
-+		/* remember desc values... */
-+		error = read_slavemem8 (adev, (u32) &(txdesc->error));
-+		ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures));
-+		rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures));
-+		rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok));
-+		r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate));
-+		r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111)));
-+
-+		/* need to check for certain error conditions before we
-+		 * clean the descriptor: we still need valid descr data here */
-+		if (unlikely(0x30 & error)) {
-+			/* only send IWEVTXDROP in case of retry or lifetime exceeded;
-+			 * all other errors mean we screwed up locally */
-+			union iwreq_data wrqu;
-+			wlan_hdr_t *hdr;
-+			txhostdesc_t *hostdesc;
-+
-+			hostdesc = get_txhostdesc(adev, txdesc);
-+			hdr = (wlan_hdr_t *)hostdesc->data;
-+			MAC_COPY(wrqu.addr.sa_data, hdr->a1);
-+			wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL);
-+		}
-+
-+		/*
-+		 * Free up the transmit data buffers
-+		 */
-+		acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+		if (acxmem) {
-+		  reclaim_acx_txbuf_space (adev, acxmem);
-+		}
-+
-+		/* ...and free the desc by clearing all the fields 
-+		   except the next pointer */
-+		copy_to_slavemem (adev,
-+				  (u32) &(txdesc->HostMemPtr), 
-+				  (u8 *) &(tmptxdesc.HostMemPtr),
-+				  sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)
-+				  );
-+
-+		adev->tx_free++;
-+		num_cleaned++;
-+
-+		if ((adev->tx_free >= TX_START_QUEUE)
-+		 && (adev->status == ACX_STATUS_4_ASSOCIATED)
-+		 && (acx_queue_stopped(adev->ndev))
-+		) {
-+			log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n",
-+					adev->tx_free);
-+			acx_wake_queue(adev->ndev, NULL);
-+		}
-+
-+		/* do error checking, rate handling and logging
-+		 * AFTER having done the work, it's faster */
-+
-+		/* do rate handling */
-+		if (adev->rate_auto) {
-+			struct client *clt = get_txc(adev, txdesc);
-+			if (clt) {
-+				u16 cur = get_txr(adev, txdesc);
-+				if (clt->rate_cur == cur) {
-+					acx_l_handle_txrate_auto(adev, clt,
-+						cur, /* intended rate */
-+						r100, r111, /* actually used rate */
-+						(error & 0x30), /* was there an error? */
-+						TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free);
-+				}
-+			}
-+		}
-+
-+		if (unlikely(error))
-+			handle_tx_error(adev, error, finger);
-+
-+		if (IS_ACX111(adev))
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n",
-+				finger, ack_failures, rts_failures, rts_ok, r111);
-+		else
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n",
-+				finger, ack_failures, rts_failures, rts_ok, r100);
-+
-+		/* update pointer for descr to be cleaned next */
-+		finger = (finger + 1) % TX_CNT;
-+	}
-+
-+	/* remember last position */
-+	adev->tx_tail = finger;
-+/* end: */
-+	FN_EXIT1(num_cleaned);
-+	return num_cleaned;
-+}
-+
-+/* clean *all* Tx descriptors, and regardless of their previous state.
-+ * Used for brute-force reset handling. */
-+void
-+acxmem_l_clean_txdesc_emergency(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+	u32 acxmem;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < TX_CNT; i++) {
-+		txdesc = get_txdesc(adev, i);
-+
-+		/* free it */
-+		write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->error), 0);
-+		write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN);
-+
-+		/*
-+		 * Clean up the memory allocated on the ACX for this transmit descriptor.
-+		 */
-+		acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+		if (acxmem) {
-+		  reclaim_acx_txbuf_space (adev, acxmem);
-+		}		
-+		
-+		write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0);
-+	}
-+
-+	adev->tx_free = TX_CNT;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_s_create_tx_host_desc_queue
-+*/
-+
-+static void*
-+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg)
-+{
-+	void *ptr;
-+        ptr = kmalloc (size, GFP_KERNEL);
-+	/*
-+	 * The ACX can't use the physical address, so we'll have to fake it
-+	 * later and it might be handy to have the virtual address.
-+	 */
-+	*phy = (dma_addr_t) NULL;
-+
-+	if (ptr) {
-+		log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n",
-+				msg, (int)size, ptr, (unsigned long long)*phy);
-+		memset(ptr, 0, size);
-+		return ptr;
-+	}
-+	printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n",
-+					msg, (int)size);
-+	return NULL;
-+}
-+
-+
-+/*
-+ * In the generic slave memory access mode, most of the stuff in
-+ * the txhostdesc_t is unused.  It's only here because the rest of
-+ * the ACX driver expects it to be since the PCI version uses indirect
-+ * host memory organization with DMA.  Since we're not using DMA the
-+ * only use we have for the host descriptors is to store the packets
-+ * on the way out.
-+ */
-+static int
-+acxmem_s_create_tx_host_desc_queue(acx_device_t *adev)
-+{
-+	txhostdesc_t *hostdesc;
-+	u8 *txbuf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate TX buffer */
-+	adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS;
-+
-+	adev->txbuf_start = allocate(adev, adev->txbuf_area_size,
-+				     &adev->txbuf_startphy, "txbuf_start");
-+	if (!adev->txbuf_start)
-+	  goto fail;
-+
-+	/* allocate the TX host descriptor queue pool */
-+	adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc);
-+
-+	adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size,
-+					  &adev->txhostdesc_startphy, "txhostdesc_start");
-+	if (!adev->txhostdesc_start)
-+	  goto fail;
-+
-+	/* check for proper alignment of TX host descriptor pool */
-+	if ((long) adev->txhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	hostdesc = adev->txhostdesc_start;
-+	txbuf = adev->txbuf_start;
-+
-+#if 0
-+/* Each tx buffer is accessed by hardware via
-+** txdesc -> txhostdesc(s) -> txbuffer(s).
-+** We use only one txhostdesc per txdesc, but it looks like
-+** acx111 is buggy: it accesses second txhostdesc
-+** (via hostdesc.desc_phy_next field) even if
-+** txdesc->length == hostdesc->length and thus
-+** entire packet was placed into first txhostdesc.
-+** Due to this bug acx111 hangs unless second txhostdesc
-+** has le16_to_cpu(hostdesc.length) = 3 (or larger)
-+** Storing NULL into hostdesc.desc_phy_next
-+** doesn't seem to help.
-+**
-+** Update: although it worked on Xterasys XN-2522g
-+** with len=3 trick, WG311v2 is even more bogus, doesn't work.
-+** Keeping this code (#ifdef'ed out) for documentational purposes.
-+*/
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		hostdesc_phy += sizeof(*hostdesc);
-+		if (!(i & 1)) {
-+			hostdesc->data_phy = cpu2acx(txbuf_phy);
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN);
-+			/* hostdesc->length = ... */
-+			hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+			hostdesc->pNext = ptr2acx(NULL);
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			hostdesc->data = txbuf;
-+
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS;
-+			txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS;
-+		} else {
-+			/* hostdesc->data_phy = ... */
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			/* hostdesc->Ctl_16 = ... */
-+			hostdesc->length = cpu_to_le16(3); /* bug workaround */
-+			/* hostdesc->desc_phy_next = ... */
-+			/* hostdesc->pNext = ... */
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			/* hostdesc->data = ... */
-+		}
-+		hostdesc++;
-+	}
-+#endif
-+/* We initialize two hostdescs so that they point to adjacent
-+** memory areas. Thus txbuf is really just a contiguous memory area */
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		/* ->data is a non-hardware field: */
-+		hostdesc->data = txbuf;
-+
-+		if (!(i & 1)) {
-+			txbuf += WLAN_HDR_A3_LEN;
-+		} else {
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN;
-+		}
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_tx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_create_rx_host_desc_queue
-+*/
-+/* the whole size of a data buffer (header plus data body)
-+ * plus 32 bytes safety offset at the end */
-+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32)
-+
-+static int
-+acxmem_s_create_rx_host_desc_queue(acx_device_t *adev)
-+{
-+	rxhostdesc_t *hostdesc;
-+	rxbuffer_t *rxbuf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate the RX host descriptor queue pool */
-+	adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc);
-+
-+	adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size,
-+					  &adev->rxhostdesc_startphy, "rxhostdesc_start");
-+	if (!adev->rxhostdesc_start)
-+	  goto fail;
-+
-+	/* check for proper alignment of RX host descriptor pool */
-+	if ((long) adev->rxhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	/* allocate Rx buffer pool which will be used by the acx
-+	 * to store the whole content of the received frames in it */
-+	adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE;
-+
-+	adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size,
-+				     &adev->rxbuf_startphy, "rxbuf_start");
-+	if (!adev->rxbuf_start)
-+	  goto fail;
-+
-+	rxbuf = adev->rxbuf_start;
-+	hostdesc = adev->rxhostdesc_start;
-+
-+	/* don't make any popular C programming pointer arithmetic mistakes
-+	 * here, otherwise I'll kill you...
-+	 * (and don't dare asking me why I'm warning you about that...) */
-+	for (i = 0; i < RX_CNT; i++) {
-+		hostdesc->data = rxbuf;
-+		hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE);
-+		rxbuf++;
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_rx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_create_hostdesc_queues
-+*/
-+int
-+acxmem_s_create_hostdesc_queues(acx_device_t *adev)
-+{
-+	int result;
-+	result = acxmem_s_create_tx_host_desc_queue(adev);
-+	if (OK != result) return result;
-+	result = acxmem_s_create_rx_host_desc_queue(adev);
-+	return result;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_tx_desc_queue
-+*/
-+static void
-+acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start)
-+{
-+	txdesc_t *txdesc;
-+	u32 clr;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	if (IS_ACX100(adev))
-+		adev->txdesc_size = sizeof(*txdesc);
-+	else
-+		/* the acx111 txdesc is 4 bytes larger */
-+		adev->txdesc_size = sizeof(*txdesc) + 4;
-+
-+	/*
-+	 * This refers to an ACX address, not one of ours
-+	 */
-+	adev->txdesc_start = (txdesc_t *) tx_queue_start;
-+
-+	log(L_DEBUG, "adev->txdesc_start=%p\n",
-+			adev->txdesc_start);
-+
-+	adev->tx_free = TX_CNT;
-+	/* done by memset: adev->tx_head = 0; */
-+	/* done by memset: adev->tx_tail = 0; */
-+	txdesc = adev->txdesc_start;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111 has a preinitialized Tx buffer! */
-+		/* loop over whole send pool */
-+		/* FIXME: do we have to do the hostmemptr stuff here?? */
-+		for (i = 0; i < TX_CNT; i++) {
-+			txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+			/* reserve two (hdr desc and payload desc) */
-+			txdesc = advance_txdesc(adev, txdesc, 1);
-+		}
-+	} else {
-+		/* ACX100 Tx buffer needs to be initialized by us */
-+		/* clear whole send pool. sizeof is safe here (we are acx100) */
-+
-+		/*
-+		 * adev->txdesc_start refers to device memory, so we can't write
-+		 * directly to it.
-+		 */
-+		clr = (u32) adev->txdesc_start;
-+		while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) {
-+		  write_slavemem32 (adev, clr, 0);
-+		  clr += 4;
-+		}
-+
-+		/* loop over whole send pool */
-+		for (i = 0; i < TX_CNT; i++) {
-+			log(L_DEBUG, "configure card tx descriptor: 0x%p, "
-+				"size: 0x%X\n", txdesc, adev->txdesc_size);
-+
-+			/* initialise ctl */
-+			/*
-+			 * No auto DMA here
-+			 */
-+			write_slavemem8 (adev, (u32) &(txdesc->Ctl_8),
-+					(u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG));
-+			/* done by memset(0): txdesc->Ctl2_8 = 0; */
-+
-+			/* point to next txdesc */
-+			write_slavemem32 (adev, (u32) &(txdesc->pNextDesc),
-+					  (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size));
-+
-+			/* go to the next one */
-+			/* ++ is safe here (we are acx100) */
-+			txdesc++;
-+		}
-+		/* go back to the last one */
-+		txdesc--;
-+		/* and point to the first making it a ring buffer */
-+		write_slavemem32 (adev, (u32) &(txdesc->pNextDesc),
-+				  (u32) cpu_to_le32 (tx_queue_start));
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_rx_desc_queue
-+*/
-+static void
-+acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start)
-+{
-+	rxdesc_t *rxdesc;
-+	u32 mem_offs;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* done by memset: adev->rx_tail = 0; */
-+
-+	/* ACX111 doesn't need any further config: preconfigures itself.
-+	 * Simply print ring buffer for debugging */
-+	if (IS_ACX111(adev)) {
-+		/* rxdesc_start already set here */
-+
-+		adev->rxdesc_start = (rxdesc_t *) rx_queue_start;
-+
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc);
-+			rxdesc = adev->rxdesc_start = (rxdesc_t *)
-+			  acx2cpu(rxdesc->pNextDesc);
-+		}
-+	} else {
-+		/* we didn't pre-calculate rxdesc_start in case of ACX100 */
-+		/* rxdesc_start should be right AFTER Tx pool */
-+		adev->rxdesc_start = (rxdesc_t *)
-+			((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t)));
-+		/* NB: sizeof(txdesc_t) above is valid because we know
-+		** we are in if (acx100) block. Beware of cut-n-pasting elsewhere!
-+		** acx111's txdesc is larger! */
-+
-+		mem_offs = (u32) adev->rxdesc_start;
-+		while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) {
-+		  write_slavemem32 (adev, mem_offs, 0);
-+		  mem_offs += 4;
-+		}
-+
-+		/* loop over whole receive pool */
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc);
-+			/* point to next rxdesc */
-+			write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc),
-+					  (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc)));
-+			/* go to the next one */
-+			rxdesc++;
-+		}
-+		/* go to the last one */
-+		rxdesc--;
-+
-+		/* and point to the first making it a ring buffer */
-+		write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc),
-+				  (u32) cpu_to_le32 (rx_queue_start));
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxmem_create_desc_queues
-+*/
-+void
-+acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start)
-+{
-+  u32 *p;
-+  int i;
-+
-+	acxmem_create_tx_desc_queue(adev, tx_queue_start);
-+	acxmem_create_rx_desc_queue(adev, rx_queue_start);
-+	p = (u32 *) adev->acx_queue_indicator;
-+	for (i = 0; i < 4; i++) {
-+	  write_slavemem32 (adev, (u32) p, 0);
-+	  p++;
-+	}
-+}
-+
-+
-+/***************************************************************
-+** acxmem_s_proc_diag_output
-+*/
-+char*
-+acxmem_s_proc_diag_output(char *p, acx_device_t *adev)
-+{
-+	const char *rtl, *thd, *ttl;
-+	txdesc_t *txdesc;
-+	u8 Ctl_8;
-+	rxdesc_t *rxdesc;
-+	int i;
-+	u32 tmp;
-+	txdesc_t txd;
-+	u8 buf[0x200];
-+	int j, k;
-+
-+	FN_ENTER;
-+
-+#if DUMP_MEM_DURING_DIAG > 0
-+	dump_acxmem (adev, 0, 0x10000);
-+	panic ("dump finished");
-+#endif
-+	
-+	p += sprintf(p, "** Rx buf **\n");
-+	rxdesc = adev->rxdesc_start;
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		rtl = (i == adev->rx_tail) ? " [tail]" : "";
-+		Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8));
-+		if (Ctl_8 & DESC_CTL_HOSTOWN)
-+			p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl);
-+		else
-+			p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl);
-+		rxdesc++;
-+	}
-+	p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free,
-+				acx_queue_stopped(adev->ndev) ? "STOPPED" : "running");
-+	
-+	p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n",
-+		     adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free);
-+	txdesc = adev->txdesc_start;
-+	if (txdesc) {
-+	  for (i = 0; i < TX_CNT; i++) {
-+	    thd = (i == adev->tx_head) ? " [head]" : "";
-+	    ttl = (i == adev->tx_tail) ? " [tail]" : "";
-+	    copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd));
-+	    Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8));
-+	    if (Ctl_8 & DESC_CTL_ACXDONE)
-+	      p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    else if (Ctl_8 & DESC_CTL_HOSTOWN)
-+	      p += sprintf(p, "%02u available     (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    else
-+	      p += sprintf(p, "%02u busy          (%02X)%s%s", i, Ctl_8, thd, ttl);
-+	    tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr));
-+	    if (tmp) {
-+	      p += sprintf (p, " %04x", tmp);
-+	      while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) {
-+		tmp <<= 5;
-+		p += sprintf (p, " %04x", tmp);
-+	      }
-+	    }
-+	    p += sprintf (p, "\n");
-+	    p += sprintf (p, "  %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n"
-+			     "%02x %02x %02x %02x %04x\n",
-+			  (u32) txdesc,
-+			  txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time,
-+			  txd.total_length, txd.Reserved,
-+			  txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3],
-+			  txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures,
-+			  txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl,
-+			  txd.queue_info
-+			  );
-+	    if (txd.AcxMemPtr.v) {
-+	      copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf));
-+	      for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) {
-+		p += sprintf (p, "    ");
-+		for (k = 0; (k < 16) && (j+k < txd.total_length); k++) {
-+		  p += sprintf (p, " %02x", buf[j+k+4]);
-+		}
-+		p += sprintf (p, "\n");
-+	      }
-+	    }
-+	    txdesc = advance_txdesc(adev, txdesc, 1);
-+	  }
-+	}
-+	
-+	p += sprintf(p,
-+		"\n"
-+		"** Generic slave data **\n"
-+                "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n"
-+		"txbuf_start 0x%p, txbuf_area_size %u\n"
-+		"txdesc_size %u, txdesc_start 0x%p\n"
-+		"txhostdesc_start 0x%p, txhostdesc_area_size %u\n"
-+		"txbuf start 0x%04x, txbuf size %d\n"
-+		"rxdesc_start 0x%p\n"
-+		"rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n"
-+		"rxbuf_start 0x%p, rxbuf_area_size %u\n",
-+		adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES),
-+		adev->txbuf_start, adev->txbuf_area_size,
-+		adev->txdesc_size, adev->txdesc_start,
-+		adev->txhostdesc_start, adev->txhostdesc_area_size,
-+                adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize,
-+		adev->rxdesc_start,
-+		adev->rxhostdesc_start, adev->rxhostdesc_area_size,
-+		adev->rxbuf_start, adev->rxbuf_area_size);
-+	FN_EXIT0;
-+	return p;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxmem_proc_eeprom_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < 0x400; i++) {
-+		acxmem_read_eeprom_byte(adev, i, p++);
-+	}
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acxmem_set_interrupt_mask(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev)) {
-+		adev->irq_mask = (u16) ~(0
-+				| HOST_INT_RX_DATA       
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				/* | HOST_INT_RX_COMPLETE    */
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				| HOST_INT_IV_ICV_FAILURE
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				| HOST_INT_OVERFLOW    
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				| HOST_INT_FCS_THRESHOLD
-+				| HOST_INT_UNKNOWN
-+				);
-+		/* Or else acx100 won't signal cmd completion, right? */
-+		adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */
-+	} else {
-+		adev->irq_mask = (u16) ~(0
-+				| HOST_INT_RX_DATA 
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				/* | HOST_INT_RX_COMPLETE    */
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				/* | HOST_INT_IV_ICV_FAILURE */
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				/* | HOST_INT_OVERFLOW       */
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				/* | HOST_INT_FCS_THRESHOLD  */
-+				/* | HOST_INT_BEACON_MISSED        */
-+				);
-+		adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	struct acx111_ie_tx_level tx_level;
-+
-+	/* since it can be assumed that at least the Maxim radio has a
-+	 * maximum power output of 20dBm and since it also can be
-+	 * assumed that these values drive the DAC responsible for
-+	 * setting the linear Tx level, I'd guess that these values
-+	 * should be the corresponding linear values for a dBm value,
-+	 * in other words: calculate the values from that formula:
-+	 * Y [dBm] = 10 * log (X [mW])
-+	 * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm)
-+	 * and you're done...
-+	 * Hopefully that's ok, but you never know if we're actually
-+	 * right... (especially since Windows XP doesn't seem to show
-+	 * actual Tx dBm values :-P) */
-+
-+	/* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the
-+	 * values are EXACTLY mW!!! Not sure about RFMD and others,
-+	 * though... */
-+	static const u8 dbm2val_maxim[21] = {
-+		63, 63, 63, 62,
-+		61, 61, 60, 60,
-+		59, 58, 57, 55,
-+		53, 50, 47, 43,
-+		38, 31, 23, 13,
-+		0
-+	};
-+	static const u8 dbm2val_rfmd[21] = {
-+		 0,  0,  0,  1,
-+		 2,  2,  3,  3,
-+		 4,  5,  6,  8,
-+		10, 13, 16, 20,
-+		25, 32, 41, 50,
-+		63
-+	};
-+	const u8 *table;
-+
-+	switch (adev->radio_type) {
-+	case RADIO_MAXIM_0D:
-+		table = &dbm2val_maxim[0];
-+		break;
-+	case RADIO_RFMD_11:
-+	case RADIO_RALINK_15:
-+		table = &dbm2val_rfmd[0];
-+		break;
-+	default:
-+		printk("%s: unknown/unsupported radio type, "
-+			"cannot modify tx power level yet!\n",
-+				adev->ndev->name);
-+		return NOT_OK;
-+	}
-+	/*
-+	 * The hx4700 EEPROM, at least, only supports 1 power setting.  The configure
-+	 * routine matches the PA bias with the gain, so just use its default value.
-+	 * The values are: 0x2b for the gain and 0x03 for the PA bias.  The firmware
-+	 * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim
-+	 * radio's PA bias register.  The firmware limits itself to 0 - 64 when writing to the
-+	 * gain control DAC.
-+	 *
-+	 * Physically between the ACX and the radio, higher Tx gain control DAC values result
-+	 * in less power output; 0 volts to the Maxim radio results in the highest output power
-+	 * level, which I'm assuming matches up with 0 in the Tx Gain DAC register.
-+	 *
-+	 * Although there is only the 1 power setting, one of the radio firmware functions adjusts
-+	 * the transmit power level up and down.  That function is called by the ACX FIQ handler
-+	 * under certain conditions.
-+	 */
-+	tx_level.level = 1;
-+	//return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL);
-+
-+	printk("%s: changing radio power level to %u dBm (%u)\n",
-+			adev->ndev->name, level_dbm, table[level_dbm]);
-+	acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]);
-+
-+	return 0;
-+}
-+
-+
-+static struct platform_driver
-+acxmem_drv_id = {
-+	.driver	     = {
-+		.name = "acx-mem",
-+	},
-+	.probe       = acxmem_e_probe,
-+	.remove      = __devexit_p(acxmem_e_remove),
-+#ifdef CONFIG_PM
-+	.suspend     = acxmem_e_suspend,
-+	.resume      = acxmem_e_resume
-+#endif /* CONFIG_PM */
-+};
-+
-+
-+/***********************************************************************
-+** acxmem_e_init_module
-+**
-+** Module initialization routine, called once at module load time
-+*/
-+int __init
-+acxmem_e_init_module(void)
-+{
-+	int res;
-+
-+	FN_ENTER;
-+
-+#if (ACX_IO_WIDTH==32)
-+	printk("acx: compiled to use 32bit I/O access. "
-+		"I/O timing issues might occur, such as "
-+		"non-working firmware upload. Report them\n");
-+#else
-+	printk("acx: compiled to use 16bit I/O access only "
-+		"(compatibility mode)\n");
-+#endif
-+
-+#ifdef __LITTLE_ENDIAN
-+#define ENDIANNESS_STRING "running on a little-endian CPU\n"
-+#else
-+#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n"
-+#endif
-+	log(L_INIT,
-+		ENDIANNESS_STRING
-+		"PCI module " ACX_RELEASE " initialized, "
-+		"waiting for cards to probe...\n"
-+	);
-+
-+	res = platform_driver_register (&acxmem_drv_id);
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxmem_e_cleanup_module
-+**
-+** Called at module unload time. This is our last chance to
-+** clean up after ourselves.
-+*/
-+void __exit
-+acxmem_e_cleanup_module(void)
-+{
-+	FN_ENTER;
-+
-+	printk ("cleanup_module\n");
-+    	platform_driver_unregister( &acxmem_drv_id );
-+
-+	FN_EXIT0;
-+}
-+
-+void acxmem_e_release(struct device *dev) {
-+}
-+
-+MODULE_AUTHOR( "Todd Blumer <todd@sdgsystems.com>" );
-+MODULE_DESCRIPTION( "ACX Slave Memory Driver" );
-+MODULE_LICENSE( "GPL" );
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/pci.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/pci.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,4234 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+#define ACX_PCI 1
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+
-+/* Linux 2.6.18+ uses <linux/utsrelease.h> */
-+#ifndef UTS_RELEASE
-+#include <linux/utsrelease.h>
-+#endif
-+
-+#include <linux/compiler.h> /* required for Lx 2.6.8 ?? */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/skbuff.h>
-+#include <linux/slab.h>
-+#include <linux/if_arp.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+#include <linux/netdevice.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/pm.h>
-+#include <linux/vmalloc.h>
-+#include <linux/dma-mapping.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+#define PCI_TYPE		(PCI_USES_MEM | PCI_ADDR0 | PCI_NO_ACPI_WAKE)
-+#define PCI_ACX100_REGION1		0x01
-+#define PCI_ACX100_REGION1_SIZE		0x1000	/* Memory size - 4K bytes */
-+#define PCI_ACX100_REGION2		0x02
-+#define PCI_ACX100_REGION2_SIZE		0x10000 /* Memory size - 64K bytes */
-+
-+#define PCI_ACX111_REGION1		0x00
-+#define PCI_ACX111_REGION1_SIZE		0x2000	/* Memory size - 8K bytes */
-+#define PCI_ACX111_REGION2		0x01
-+#define PCI_ACX111_REGION2_SIZE		0x20000 /* Memory size - 128K bytes */
-+
-+/* Texas Instruments Vendor ID */
-+#define PCI_VENDOR_ID_TI		0x104c
-+
-+/* ACX100 22Mb/s WLAN controller */
-+#define PCI_DEVICE_ID_TI_TNETW1100A	0x8400
-+#define PCI_DEVICE_ID_TI_TNETW1100B	0x8401
-+
-+/* ACX111 54Mb/s WLAN controller */
-+#define PCI_DEVICE_ID_TI_TNETW1130	0x9066
-+
-+/* PCI Class & Sub-Class code, Network-'Other controller' */
-+#define PCI_CLASS_NETWORK_OTHERS	0x0280
-+
-+#define CARD_EEPROM_ID_SIZE 6
-+
-+#ifndef PCI_D0
-+/* From include/linux/pci.h */
-+#define PCI_D0		0
-+#define PCI_D1		1
-+#define PCI_D2		2
-+#define PCI_D3hot	3
-+#define PCI_D3cold	4
-+#define PCI_UNKNOWN	5
-+#define PCI_POWER_ERROR	-1
-+#endif
-+
-+
-+/***********************************************************************
-+*/
-+static void acxpci_i_tx_timeout(struct net_device *ndev);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id);
-+#else
-+static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+#endif
-+static void acxpci_i_set_multicast_list(struct net_device *ndev);
-+
-+static int acxpci_e_open(struct net_device *ndev);
-+static int acxpci_e_close(struct net_device *ndev);
-+static void acxpci_s_up(struct net_device *ndev);
-+static void acxpci_s_down(struct net_device *ndev);
-+
-+
-+/***********************************************************************
-+** Register access
-+*/
-+
-+/* Pick one */
-+/* #define INLINE_IO static */
-+#define INLINE_IO static inline
-+
-+INLINE_IO u32
-+read_reg32(acx_device_t *adev, unsigned int offset)
-+{
-+#if ACX_IO_WIDTH == 32
-+	return readl((u8 *)adev->iobase + adev->io[offset]);
-+#else
-+	return readw((u8 *)adev->iobase + adev->io[offset])
-+	    + (readw((u8 *)adev->iobase + adev->io[offset] + 2) << 16);
-+#endif
-+}
-+
-+INLINE_IO u16
-+read_reg16(acx_device_t *adev, unsigned int offset)
-+{
-+	return readw((u8 *)adev->iobase + adev->io[offset]);
-+}
-+
-+INLINE_IO u8
-+read_reg8(acx_device_t *adev, unsigned int offset)
-+{
-+	return readb((u8 *)adev->iobase + adev->io[offset]);
-+}
-+
-+INLINE_IO void
-+write_reg32(acx_device_t *adev, unsigned int offset, u32 val)
-+{
-+#if ACX_IO_WIDTH == 32
-+	writel(val, (u8 *)adev->iobase + adev->io[offset]);
-+#else
-+	writew(val & 0xffff, (u8 *)adev->iobase + adev->io[offset]);
-+	writew(val >> 16, (u8 *)adev->iobase + adev->io[offset] + 2);
-+#endif
-+}
-+
-+INLINE_IO void
-+write_reg16(acx_device_t *adev, unsigned int offset, u16 val)
-+{
-+	writew(val, (u8 *)adev->iobase + adev->io[offset]);
-+}
-+
-+INLINE_IO void
-+write_reg8(acx_device_t *adev, unsigned int offset, u8 val)
-+{
-+	writeb(val, (u8 *)adev->iobase + adev->io[offset]);
-+}
-+
-+/* Handle PCI posting properly:
-+ * Make sure that writes reach the adapter in case they require to be executed
-+ * *before* the next write, by reading a random (and safely accessible) register.
-+ * This call has to be made if there is no read following (which would flush the data
-+ * to the adapter), yet the written data has to reach the adapter immediately. */
-+INLINE_IO void
-+write_flush(acx_device_t *adev)
-+{
-+	/* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */
-+	/* faster version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should also be safe): */
-+	readb(adev->iobase);
-+}
-+
-+INLINE_IO int
-+adev_present(acx_device_t *adev)
-+{
-+	/* fast version (accesses the first register, IO_ACX_SOFT_RESET,
-+	 * which should be safe): */
-+	return readl(adev->iobase) != 0xffffffff;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static inline txdesc_t*
-+get_txdesc(acx_device_t *adev, int index)
-+{
-+	return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size);
-+}
-+
-+static inline txdesc_t*
-+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc)
-+{
-+	return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size);
-+}
-+
-+static txhostdesc_t*
-+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return &adev->txhostdesc_start[index*2];
-+}
-+
-+static inline client_t*
-+get_txc(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return NULL;
-+	}
-+	return adev->txc[index];
-+}
-+
-+static inline u16
-+get_txr(acx_device_t *adev, txdesc_t* txdesc)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	index /= adev->txdesc_size;
-+	return adev->txr[index];
-+}
-+
-+static inline void
-+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111)
-+{
-+	int index = (u8*)txdesc - (u8*)adev->txdesc_start;
-+	if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	index /= adev->txdesc_size;
-+	if (unlikely(ACX_DEBUG && (index >= TX_CNT))) {
-+		printk("bad txdesc ptr %p\n", txdesc);
-+		return;
-+	}
-+	adev->txc[index] = c;
-+	adev->txr[index] = r111;
-+}
-+
-+
-+/***********************************************************************
-+** EEPROM and PHY read/write helpers
-+*/
-+/***********************************************************************
-+** acxpci_read_eeprom_byte
-+**
-+** Function called to read an octet in the EEPROM.
-+**
-+** This function is used by acxpci_e_probe to check if the
-+** connected card is a legal one or not.
-+**
-+** Arguments:
-+**	adev		ptr to acx_device structure
-+**	addr		address to read in the EEPROM
-+**	charbuf		ptr to a char. This is where the read octet
-+**			will be stored
-+*/
-+int
-+acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf)
-+{
-+	int result;
-+	int count;
-+
-+	write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+	write_reg32(adev, IO_ACX_EEPROM_ADDR, addr);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for EEPROM read\n",
-+							adev->ndev->name);
-+			result = NOT_OK;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	*charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA);
-+	log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf);
-+	result = OK;
-+
-+fail:
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** We don't lock hw accesses here since we never r/w eeprom in IRQ
-+** Note: this function sleeps only because of GFP_KERNEL alloc
-+*/
-+#ifdef UNUSED
-+int
-+acxpci_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf)
-+{
-+	u8 *data_verify = NULL;
-+	unsigned long flags;
-+	int count, i;
-+	int result = NOT_OK;
-+	u16 gpio_orig;
-+
-+	printk("acx: WARNING! I would write to EEPROM now. "
-+		"Since I really DON'T want to unless you know "
-+		"what you're doing (THIS CODE WILL PROBABLY "
-+		"NOT WORK YET!), I will abort that now. And "
-+		"definitely make sure to make a "
-+		"/proc/driver/acx_wlan0_eeprom backup copy first!!! "
-+		"(the EEPROM content includes the PCI config header!! "
-+		"If you kill important stuff, then you WILL "
-+		"get in trouble and people DID get in trouble already)\n");
-+	return OK;
-+
-+	FN_ENTER;
-+
-+	data_verify = kmalloc(len, GFP_KERNEL);
-+	if (!data_verify) {
-+		goto end;
-+	}
-+
-+	/* first we need to enable the OE (EEPROM Output Enable) GPIO line
-+	 * to be able to write to the EEPROM.
-+	 * NOTE: an EEPROM writing success has been reported,
-+	 * but you probably have to modify GPIO_OUT, too,
-+	 * and you probably need to activate a different GPIO
-+	 * line instead! */
-+	gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE);
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1);
-+	write_flush(adev);
-+
-+	/* ok, now start writing the data out */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i));
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 1);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("WARNING, DANGER!!! "
-+					"Timeout waiting for EEPROM write\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+	}
-+
-+	/* disable EEPROM writing */
-+	write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig);
-+	write_flush(adev);
-+
-+	/* now start a verification run */
-+	for (i = 0; i < len; i++) {
-+		write_reg32(adev, IO_ACX_EEPROM_CFG, 0);
-+		write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i);
-+		write_flush(adev);
-+		write_reg32(adev, IO_ACX_EEPROM_CTL, 2);
-+
-+		count = 0xffff;
-+		while (read_reg16(adev, IO_ACX_EEPROM_CTL)) {
-+			if (unlikely(!--count)) {
-+				printk("timeout waiting for EEPROM read\n");
-+				goto end;
-+			}
-+			cpu_relax();
-+		}
-+
-+		data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA);
-+	}
-+
-+	if (0 == memcmp(charbuf, data_verify, len))
-+		result = OK; /* read data matches, success */
-+
-+end:
-+	kfree(data_verify);
-+	FN_EXIT1(result);
-+	return result;
-+}
-+#endif /* UNUSED */
-+
-+
-+/***********************************************************************
-+** acxpci_s_read_phy_reg
-+**
-+** Messing with rx/tx disabling and enabling here
-+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic
-+*/
-+int
-+acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	int result = NOT_OK;
-+	int count;
-+
-+	FN_ENTER;
-+
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 2);
-+
-+	count = 0xffff;
-+	while (read_reg32(adev, IO_ACX_PHY_CTL)) {
-+		/* scheduling away instead of CPU burning loop
-+		 * doesn't seem to work here at all:
-+		 * awful delay, sometimes also failure.
-+		 * Doesn't matter anyway (only small delay). */
-+		if (unlikely(!--count)) {
-+			printk("%s: timeout waiting for phy read\n",
-+							adev->ndev->name);
-+			*charbuf = 0;
-+			goto fail;
-+		}
-+		cpu_relax();
-+	}
-+
-+	log(L_DEBUG, "count was %u\n", count);
-+	*charbuf = read_reg8(adev, IO_ACX_PHY_DATA);
-+
-+	log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg);
-+	result = OK;
-+	goto fail; /* silence compiler warning */
-+fail:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+	FN_ENTER;
-+
-+	/* mprusko said that 32bit accesses result in distorted sensitivity
-+	 * on his card. Unconfirmed, looks like it's not true (most likely since we
-+	 * now properly flush writes). */
-+	write_reg32(adev, IO_ACX_PHY_DATA, value);
-+	write_reg32(adev, IO_ACX_PHY_ADDR, reg);
-+	write_flush(adev);
-+	write_reg32(adev, IO_ACX_PHY_CTL, 1);
-+	write_flush(adev);
-+	log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+#define NO_AUTO_INCREMENT	1
-+
-+/***********************************************************************
-+** acxpci_s_write_fw
-+**
-+** Write the firmware image into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**	fw_image	firmware image.
-+**
-+** Returns:
-+**	1	firmware image corrupted
-+**	0	success
-+*/
-+static int
-+acxpci_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset)
-+{
-+	int len, size;
-+	u32 sum, v32;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+	write_reg32(adev, IO_ACX_SLV_END_CTL, 0);
-+
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+	write_flush(adev);
-+#endif
-+
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		sum += p[0]+p[1]+p[2]+p[3];
-+		p += 4;
-+		len += 4;
-+
-+#if NO_AUTO_INCREMENT
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+		write_flush(adev);
-+#endif
-+		write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32);
-+	}
-+
-+	log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n",
-+			size, sum, le32_to_cpu(fw_image->chksum));
-+
-+	/* compare our checksum with the stored image checksum */
-+	return (sum != le32_to_cpu(fw_image->chksum));
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_validate_fw
-+**
-+** Compare the firmware image given with
-+** the firmware image written into the card.
-+**
-+** Arguments:
-+**	adev		wlan device structure
-+**   fw_image  firmware image.
-+**
-+** Returns:
-+**	NOT_OK	firmware image corrupted or not correctly written
-+**	OK	success
-+*/
-+static int
-+acxpci_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image,
-+				u32 offset)
-+{
-+	u32 sum, v32, w32;
-+	int len, size;
-+	int result = OK;
-+	/* we skip the first four bytes which contain the control sum */
-+	const u8 *p = (u8*)fw_image + 4;
-+
-+	/* start the image checksum by adding the image size value */
-+	sum = p[0]+p[1]+p[2]+p[3];
-+	p += 4;
-+
-+	write_reg32(adev, IO_ACX_SLV_END_CTL, 0);
-+
-+#if NO_AUTO_INCREMENT
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */
-+#else
-+	write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */
-+	write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */
-+#endif
-+
-+	len = 0;
-+	size = le32_to_cpu(fw_image->size) & (~3);
-+
-+	while (likely(len < size)) {
-+		v32 = be32_to_cpu(*(u32*)p);
-+		p += 4;
-+		len += 4;
-+
-+#if NO_AUTO_INCREMENT
-+		write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4);
-+#endif
-+		w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA);
-+
-+		if (unlikely(w32 != v32)) {
-+			printk("acx: FATAL: firmware upload: "
-+			"data parts at offset %d don't match (0x%08X vs. 0x%08X)! "
-+			"I/O timing issues or defective memory, with DWL-xx0+? "
-+			"ACX_IO_WIDTH=16 may help. Please report\n",
-+				len, v32, w32);
-+			result = NOT_OK;
-+			break;
-+		}
-+
-+		sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24);
-+	}
-+
-+	/* sum control verification */
-+	if (result != NOT_OK) {
-+		if (sum != le32_to_cpu(fw_image->chksum)) {
-+			printk("acx: FATAL: firmware upload: "
-+				"checksums don't match!\n");
-+			result = NOT_OK;
-+		}
-+	}
-+
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_upload_fw
-+**
-+** Called from acx_reset_dev
-+*/
-+static int
-+acxpci_s_upload_fw(acx_device_t *adev)
-+{
-+	firmware_image_t *fw_image = NULL;
-+	int res = NOT_OK;
-+	int try;
-+	u32 file_size;
-+	char filename[sizeof("tiacx1NNcNN")];
-+
-+	FN_ENTER;
-+
-+	/* print exact chipset and radio ID to make sure people really get a clue on which files exactly they are supposed to provide,
-+	 * since firmware loading is the biggest enduser PITA with these chipsets.
-+	 * Not printing radio ID in 0xHEX in order to not confuse them into wrong file naming */
-+	printk(	"acx: need to load firmware for acx1%02d chipset with radio ID %02x, please provide via firmware hotplug:\n"
-+		"acx: either one file only (<c>ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate <r>adio-specific extension file)\n",
-+		IS_ACX111(adev)*11, adev->radio_type);
-+
-+	/* Try combined, then main image */
-+	adev->need_radio_fw = 0;
-+	snprintf(filename, sizeof(filename), "tiacx1%02dc%02X",
-+		IS_ACX111(adev)*11, adev->radio_type);
-+
-+	fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size);
-+	if (!fw_image) {
-+		adev->need_radio_fw = 1;
-+		filename[sizeof("tiacx1NN")-1] = '\0';
-+		fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size);
-+		if (!fw_image) {
-+			FN_EXIT1(NOT_OK);
-+			return NOT_OK;
-+		}
-+	}
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxpci_s_write_fw(adev, fw_image, 0);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (main/combined): %d\n", res);
-+		if (OK == res) {
-+			res = acxpci_s_validate_fw(adev, fw_image, 0);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw "
-+					"(main/combined): %d\n", res);
-+		}
-+
-+		if (OK == res) {
-+			SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED);
-+			break;
-+		}
-+		printk("acx: firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+	vfree(fw_image);
-+
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_upload_radio
-+**
-+** Uploads the appropriate radio module firmware into the card.
-+*/
-+int
-+acxpci_s_upload_radio(acx_device_t *adev)
-+{
-+	acx_ie_memmap_t mm;
-+	firmware_image_t *radio_image;
-+	acx_cmd_radioinit_t radioinit;
-+	int res = NOT_OK;
-+	int try;
-+	u32 offset;
-+	u32 size;
-+	char filename[sizeof("tiacx1NNrNN")];
-+
-+	if (!adev->need_radio_fw) return OK;
-+
-+	FN_ENTER;
-+
-+	acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+	offset = le32_to_cpu(mm.CodeEnd);
-+
-+	snprintf(filename, sizeof(filename), "tiacx1%02dr%02X",
-+		IS_ACX111(adev)*11,
-+		adev->radio_type);
-+	radio_image = acx_s_read_fw(&adev->pdev->dev, filename, &size);
-+	if (!radio_image) {
-+		printk("acx: can't load radio module '%s'\n", filename);
-+		goto fail;
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0);
-+
-+	for (try = 1; try <= 5; try++) {
-+		res = acxpci_s_write_fw(adev, radio_image, offset);
-+		log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res);
-+		if (OK == res) {
-+			res = acxpci_s_validate_fw(adev, radio_image, offset);
-+			log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res);
-+		}
-+
-+		if (OK == res)
-+			break;
-+		printk("acx: radio firmware upload attempt #%d FAILED, "
-+			"retrying...\n", try);
-+		acx_s_msleep(1000); /* better wait for a while... */
-+	}
-+
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+	radioinit.offset = cpu_to_le32(offset);
-+	/* no endian conversion needed, remains in card CPU area: */
-+	radioinit.len = radio_image->size;
-+
-+	vfree(radio_image);
-+
-+	if (OK != res)
-+		goto fail;
-+
-+	/* will take a moment so let's have a big timeout */
-+	acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT,
-+		&radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000));
-+
-+	res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP);
-+fail:
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_l_reset_mac
-+**
-+** MAC will be reset
-+** Call context: reset_dev
-+*/
-+static void
-+acxpci_l_reset_mac(acx_device_t *adev)
-+{
-+	u16 temp;
-+
-+	FN_ENTER;
-+
-+	/* halt eCPU */
-+	temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1;
-+	write_reg16(adev, IO_ACX_ECPU_CTRL, temp);
-+
-+	/* now do soft reset of eCPU, set bit */
-+	temp = read_reg16(adev, IO_ACX_SOFT_RESET) | 0x1;
-+	log(L_DEBUG, "%s: enable soft reset...\n", __func__);
-+	write_reg16(adev, IO_ACX_SOFT_RESET, temp);
-+	write_flush(adev);
-+
-+	/* now clear bit again: deassert eCPU reset */
-+	log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__);
-+	write_reg16(adev, IO_ACX_SOFT_RESET, temp & ~0x1);
-+
-+	/* now start a burst read from initial EEPROM */
-+	temp = read_reg16(adev, IO_ACX_EE_START) | 0x1;
-+	write_reg16(adev, IO_ACX_EE_START, temp);
-+	write_flush(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_verify_init
-+*/
-+static int
-+acxpci_s_verify_init(acx_device_t *adev)
-+{
-+	int result = NOT_OK;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	timeout = jiffies + 2*HZ;
-+	for (;;) {
-+		u16 irqstat = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+		if (irqstat & HOST_INT_FCS_THRESHOLD) {
-+			result = OK;
-+			write_reg16(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD);
-+			break;
-+		}
-+		if (time_after(jiffies, timeout))
-+			break;
-+		/* Init may take up to ~0.5 sec total */
-+		acx_s_msleep(50);
-+	}
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** A few low-level helpers
-+**
-+** Note: these functions are not protected by lock
-+** and thus are never allowed to be called from IRQ.
-+** Also they must not race with fw upload which uses same hw regs
-+*/
-+
-+/***********************************************************************
-+** acxpci_write_cmd_type_status
-+*/
-+
-+static inline void
-+acxpci_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status)
-+{
-+	writel(type | (status << 16), adev->cmd_area);
-+	write_flush(adev);
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_read_cmd_type_status
-+*/
-+static u32
-+acxpci_read_cmd_type_status(acx_device_t *adev)
-+{
-+	u32 cmd_type, cmd_status;
-+
-+	cmd_type = readl(adev->cmd_area);
-+	cmd_status = (cmd_type >> 16);
-+	cmd_type = (u16)cmd_type;
-+
-+	log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n",
-+		cmd_type, cmd_status,
-+		acx_cmd_status_str(cmd_status));
-+
-+	return cmd_status;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_reset_dev
-+**
-+** Arguments:
-+**	netdevice that contains the adev variable
-+** Returns:
-+**	NOT_OK on fail
-+**	OK on success
-+** Side effects:
-+**	device is hard reset
-+** Call context:
-+**	acxpci_e_probe
-+** Comment:
-+**	This resets the device using low level hardware calls
-+**	as well as uploads and verifies the firmware to the card
-+*/
-+
-+static inline void
-+init_mboxes(acx_device_t *adev)
-+{
-+	u32 cmd_offs, info_offs;
-+
-+	cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS);
-+	info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS);
-+	adev->cmd_area = (u8 *)adev->iobase2 + cmd_offs;
-+	adev->info_area = (u8 *)adev->iobase2 + info_offs;
-+	log(L_DEBUG, "iobase2=%p\n"
-+		"cmd_mbox_offset=%X cmd_area=%p\n"
-+		"info_mbox_offset=%X info_area=%p\n",
-+		adev->iobase2,
-+		cmd_offs, adev->cmd_area,
-+		info_offs, adev->info_area);
-+}
-+
-+
-+static inline void
-+read_eeprom_area(acx_device_t *adev)
-+{
-+#if ACX_DEBUG > 1
-+	int offs;
-+	u8 tmp;
-+
-+	for (offs = 0x8c; offs < 0xb9; offs++)
-+		acxpci_read_eeprom_byte(adev, offs, &tmp);
-+#endif
-+}
-+
-+
-+static int
-+acxpci_s_reset_dev(acx_device_t *adev)
-+{
-+	const char* msg = "";
-+	unsigned long flags;
-+	int result = NOT_OK;
-+	u16 hardware_info;
-+	u16 ecpu_ctrl;
-+	int count;
-+
-+	FN_ENTER;
-+
-+	/* reset the device to make sure the eCPU is stopped
-+	 * to upload the firmware correctly */
-+
-+	acx_lock(adev, flags);
-+
-+	acxpci_l_reset_mac(adev);
-+
-+	ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1;
-+	if (!ecpu_ctrl) {
-+		msg = "eCPU is already running. ";
-+		goto end_unlock;
-+	}
-+
-+#ifdef WE_DONT_NEED_THAT_DO_WE
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) {
-+		/* eCPU most likely means "embedded CPU" */
-+		msg = "eCPU did not start after boot from flash. ";
-+		goto end_unlock;
-+	}
-+
-+	/* check sense on reset flags */
-+	if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) {
-+		printk("%s: eCPU did not start after boot (SOR), "
-+			"is this fatal?\n", adev->ndev->name);
-+	}
-+#endif
-+	/* scan, if any, is stopped now, setting corresponding IRQ bit */
-+	adev->irq_status |= HOST_INT_SCAN_COMPLETE;
-+
-+	acx_unlock(adev, flags);
-+
-+	/* need to know radio type before fw load */
-+	/* Need to wait for arrival of this information in a loop,
-+	 * most probably since eCPU runs some init code from EEPROM
-+	 * (started burst read in reset_mac()) which also
-+	 * sets the radio type ID */
-+
-+	count = 0xffff;
-+	do {
-+		hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION);
-+		if (!--count) {
-+			msg = "eCPU didn't indicate radio type";
-+			goto end_fail;
-+		}
-+		cpu_relax();
-+	} while (!(hardware_info & 0xff00)); /* radio type still zero? */
-+
-+	/* printk("DEBUG: count %d\n", count); */
-+	adev->form_factor = hardware_info & 0xff;
-+	adev->radio_type = hardware_info >> 8;
-+
-+	/* load the firmware */
-+	if (OK != acxpci_s_upload_fw(adev))
-+		goto end_fail;
-+
-+	/* acx_s_msleep(10);	this one really shouldn't be required */
-+
-+	/* now start eCPU by clearing bit */
-+	write_reg16(adev, IO_ACX_ECPU_CTRL, ecpu_ctrl & ~0x1);
-+	log(L_DEBUG, "booted eCPU up and waiting for completion...\n");
-+
-+	/* wait for eCPU bootup */
-+	if (OK != acxpci_s_verify_init(adev)) {
-+		msg = "timeout waiting for eCPU. ";
-+		goto end_fail;
-+	}
-+	log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n");
-+
-+	init_mboxes(adev);
-+	acxpci_write_cmd_type_status(adev, 0, 0);
-+
-+	/* test that EEPROM is readable */
-+	read_eeprom_area(adev);
-+
-+	result = OK;
-+	goto end;
-+
-+/* Finish error message. Indicate which function failed */
-+end_unlock:
-+	acx_unlock(adev, flags);
-+end_fail:
-+	printk("acx: %sreset_dev() FAILED\n", msg);
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_issue_cmd_timeo
-+**
-+** Sends command to fw, extract result
-+**
-+** NB: we do _not_ take lock inside, so be sure to not touch anything
-+** which may interfere with IRQ handler operation
-+**
-+** TODO: busy wait is a bit silly, so:
-+** 1) stop doing many iters - go to sleep after first
-+** 2) go to waitqueue based approach: wait, not poll!
-+*/
-+#undef FUNC
-+#define FUNC "issue_cmd"
-+
-+#if !ACX_DEBUG
-+int
-+acxpci_s_issue_cmd_timeo(
-+	acx_device_t *adev,
-+	unsigned int cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout)
-+{
-+#else
-+int
-+acxpci_s_issue_cmd_timeo_debug(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned cmd_timeout,
-+	const char* cmdstr)
-+{
-+	unsigned long start = jiffies;
-+#endif
-+	const char *devname;
-+	unsigned counter;
-+	u16 irqtype;
-+	u16 cmd_status;
-+	unsigned long timeout;
-+
-+	FN_ENTER;
-+
-+	devname = adev->ndev->name;
-+	if (!devname || !devname[0] || devname[4]=='%')
-+		devname = "acx";
-+
-+	log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n",
-+		cmdstr, buflen, cmd_timeout,
-+		buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1);
-+
-+	if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) {
-+		printk("%s: "FUNC"(): firmware is not loaded yet, "
-+			"cannot execute commands!\n", devname);
-+		goto bad;
-+	}
-+
-+	if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) {
-+		printk("input buffer (len=%u):\n", buflen);
-+		acx_dump_bytes(buffer, buflen);
-+	}
-+
-+	/* wait for firmware to become idle for our command submission */
-+	timeout = HZ/5;
-+	counter = (timeout * 1000 / HZ) - 1; /* in ms */
-+	timeout += jiffies;
-+	do {
-+		cmd_status = acxpci_read_cmd_type_status(adev);
-+		/* Test for IDLE state */
-+		if (!cmd_status)
-+			break;
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	if (!counter) {
-+		/* the card doesn't get idle, we're in trouble */
-+		printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n",
-+			devname, cmd_status);
-+		goto bad;
-+	} else if (counter < 190) { /* if waited >10ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. "
-+			"Please report\n", 199 - counter);
-+	}
-+
-+	/* now write the parameters of the command if needed */
-+	if (buffer && buflen) {
-+		/* if it's an INTERROGATE command, just pass the length
-+		 * of parameters to read, as data */
-+#if CMD_DISCOVERY
-+		if (cmd == ACX1xx_CMD_INTERROGATE)
-+			memset_io(adev->cmd_area + 4, 0xAA, buflen);
-+#endif
-+		/* adev->cmd_area points to PCI device's memory, not to RAM! */
-+		memcpy_toio(adev->cmd_area + 4, buffer,
-+			(cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen);
-+	}
-+	/* now write the actual command type */
-+	acxpci_write_cmd_type_status(adev, cmd, 0);
-+	/* execute command */
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD);
-+	write_flush(adev);
-+
-+	/* wait for firmware to process command */
-+
-+	/* Ensure nonzero and not too large timeout.
-+	** Also converts e.g. 100->99, 200->199
-+	** which is nice but not essential */
-+	cmd_timeout = (cmd_timeout-1) | 1;
-+	if (unlikely(cmd_timeout > 1199))
-+		cmd_timeout = 1199;
-+	/* clear CMD_COMPLETE bit. can be set only by IRQ handler: */
-+	adev->irq_status &= ~HOST_INT_CMD_COMPLETE;
-+
-+	/* we schedule away sometimes (timeout can be large) */
-+	counter = cmd_timeout;
-+	timeout = jiffies + cmd_timeout * HZ / 1000;
-+	do {
-+		if (!adev->irqs_active) { /* IRQ disabled: poll */
-+			irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES);
-+			if (irqtype & HOST_INT_CMD_COMPLETE) {
-+				write_reg16(adev, IO_ACX_IRQ_ACK,
-+						HOST_INT_CMD_COMPLETE);
-+				break;
-+			}
-+		} else { /* Wait when IRQ will set the bit */
-+			irqtype = adev->irq_status;
-+			if (irqtype & HOST_INT_CMD_COMPLETE)
-+				break;
-+		}
-+
-+		if (counter % 8 == 0) {
-+			if (time_after(jiffies, timeout)) {
-+				counter = 0;
-+				break;
-+			}
-+			/* we waited 8 iterations, no luck. Sleep 8 ms */
-+			acx_s_msleep(8);
-+		}
-+	} while (likely(--counter));
-+
-+	/* save state for debugging */
-+	cmd_status = acxpci_read_cmd_type_status(adev);
-+
-+	/* put the card in IDLE state */
-+	acxpci_write_cmd_type_status(adev, 0, 0);
-+
-+	if (!counter) {	/* timed out! */
-+		printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. "
-+			"irq bits:0x%04X irq_status:0x%04X timeout:%dms "
-+			"cmd_status:%d (%s)\n",
-+			devname, (adev->irqs_active) ? "waiting" : "polling",
-+			irqtype, adev->irq_status, cmd_timeout,
-+			cmd_status, acx_cmd_status_str(cmd_status));
-+		goto bad;
-+	} else if (cmd_timeout - counter > 30) { /* if waited >30ms... */
-+		log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. "
-+			"count:%d. Please report\n",
-+			(adev->irqs_active) ? "waited" : "polled",
-+			cmd_timeout - counter, counter);
-+	}
-+
-+	if (1 != cmd_status) { /* it is not a 'Success' */
-+		printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). "
-+			"Took %dms of %d\n",
-+			devname, cmd_status, acx_cmd_status_str(cmd_status),
-+			cmd_timeout - counter, cmd_timeout);
-+		/* zero out result buffer
-+		 * WARNING: this will trash stack in case of illegally large input
-+		 * length! */
-+		if (buffer && buflen)
-+			memset(buffer, 0, buflen);
-+		goto bad;
-+	}
-+
-+	/* read in result parameters if needed */
-+	if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) {
-+		/* adev->cmd_area points to PCI device's memory, not to RAM! */
-+		memcpy_fromio(buffer, adev->cmd_area + 4, buflen);
-+		if (acx_debug & L_DEBUG) {
-+			printk("output buffer (len=%u): ", buflen);
-+			acx_dump_bytes(buffer, buflen);
-+		}
-+	}
-+/* ok: */
-+	log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n",
-+			 cmdstr, jiffies - start);
-+	FN_EXIT1(OK);
-+	return OK;
-+
-+bad:
-+	/* Give enough info so that callers can avoid
-+	** printing their own diagnostic messages */
-+#if ACX_DEBUG
-+	printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr);
-+#else
-+	printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd);
-+#endif
-+	dump_stack();
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#ifdef NONESSENTIAL_FEATURES
-+typedef struct device_id {
-+	unsigned char id[6];
-+	char *descr;
-+	char *type;
-+} device_id_t;
-+
-+static const device_id_t
-+device_ids[] =
-+{
-+	{
-+		{'G', 'l', 'o', 'b', 'a', 'l'},
-+		NULL,
-+		NULL,
-+	},
-+	{
-+		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
-+		"uninitialized",
-+		"SpeedStream SS1021 or Gigafast WF721-AEX"
-+	},
-+	{
-+		{0x80, 0x81, 0x82, 0x83, 0x84, 0x85},
-+		"non-standard",
-+		"DrayTek Vigor 520"
-+	},
-+	{
-+		{'?', '?', '?', '?', '?', '?'},
-+		"non-standard",
-+		"Level One WPC-0200"
-+	},
-+	{
-+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
-+		"empty",
-+		"DWL-650+ variant"
-+	}
-+};
-+
-+static void
-+acx_show_card_eeprom_id(acx_device_t *adev)
-+{
-+	unsigned char buffer[CARD_EEPROM_ID_SIZE];
-+	int i;
-+
-+	memset(&buffer, 0, CARD_EEPROM_ID_SIZE);
-+	/* use direct EEPROM access */
-+	for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) {
-+		if (OK != acxpci_read_eeprom_byte(adev,
-+					 ACX100_EEPROM_ID_OFFSET + i,
-+					 &buffer[i])) {
-+			printk("acx: reading EEPROM FAILED\n");
-+			break;
-+		}
-+	}
-+
-+	for (i = 0; i < VEC_SIZE(device_ids); i++) {
-+		if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) {
-+			if (device_ids[i].descr) {
-+				printk("acx: EEPROM card ID string check "
-+					"found %s card ID: is this %s?\n",
-+					device_ids[i].descr, device_ids[i].type);
-+			}
-+			break;
-+		}
-+	}
-+	if (i == VEC_SIZE(device_ids)) {
-+		printk("acx: EEPROM card ID string check found "
-+			"unknown card: expected 'Global', got '%.*s\'. "
-+			"Please report\n", CARD_EEPROM_ID_SIZE, buffer);
-+	}
-+}
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+
-+/***********************************************************************
-+** acxpci_free_desc_queues
-+**
-+** Releases the queues that have been allocated, the
-+** others have been initialised to NULL so this
-+** function can be used if only part of the queues were allocated.
-+*/
-+
-+static inline void
-+free_coherent(struct pci_dev *hwdev, size_t size,
-+			void *vaddr, dma_addr_t dma_handle)
-+{
-+	dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev,
-+			size, vaddr, dma_handle);
-+}
-+
-+void
-+acxpci_free_desc_queues(acx_device_t *adev)
-+{
-+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \
-+	if (ptr) { \
-+		free_coherent(0, size, ptr, phyaddr); \
-+		ptr = NULL; \
-+		size = 0; \
-+	}
-+
-+	FN_ENTER;
-+
-+	ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy);
-+
-+	adev->txdesc_start = NULL;
-+
-+	ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy);
-+	ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy);
-+
-+	adev->rxdesc_start = NULL;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_delete_dma_regions
-+*/
-+static void
-+acxpci_s_delete_dma_regions(acx_device_t *adev)
-+{
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+	/* disable radio Tx/Rx. Shouldn't we use the firmware commands
-+	 * here instead? Or are we that much down the road that it's no
-+	 * longer possible here? */
-+	write_reg16(adev, IO_ACX_ENABLE, 0);
-+
-+	acx_s_msleep(100);
-+
-+	acx_lock(adev, flags);
-+	acxpci_free_desc_queues(adev);
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_probe
-+**
-+** Probe routine called when a PCI device w/ matching ID is found.
-+** Here's the sequence:
-+**   - Allocate the PCI resources.
-+**   - Read the PCMCIA attribute memory to make sure we have a WLAN card
-+**   - Reset the MAC
-+**   - Initialize the dev and wlan data
-+**   - Initialize the MAC
-+**
-+** pdev	- ptr to pci device structure containing info about pci configuration
-+** id	- ptr to the device id entry that matched this device
-+*/
-+static const u16
-+IO_ACX100[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_END_CTL */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x007c, /* IO_ACX_INT_TRIG */
-+	0x0098, /* IO_ACX_IRQ_MASK */
-+	0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00ac, /* IO_ACX_IRQ_ACK */
-+	0x00b0, /* IO_ACX_HINT_TRIG */
-+
-+	0x0104, /* IO_ACX_ENABLE */
-+
-+	0x0250, /* IO_ACX_EEPROM_CTL */
-+	0x0254, /* IO_ACX_EEPROM_ADDR */
-+	0x0258, /* IO_ACX_EEPROM_DATA */
-+	0x025c, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0268, /* IO_ACX_PHY_ADDR */
-+	0x026c, /* IO_ACX_PHY_DATA */
-+	0x0270, /* IO_ACX_PHY_CTL */
-+
-+	0x0290, /* IO_ACX_GPIO_OE */
-+
-+	0x0298, /* IO_ACX_GPIO_OUT */
-+
-+	0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x02ac, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x02d0, /* IO_ACX_EE_START */
-+	0x02d4, /* IO_ACX_SOR_CFG */
-+	0x02d8 /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static const u16
-+IO_ACX111[] =
-+{
-+	0x0000, /* IO_ACX_SOFT_RESET */
-+
-+	0x0014, /* IO_ACX_SLV_MEM_ADDR */
-+	0x0018, /* IO_ACX_SLV_MEM_DATA */
-+	0x001c, /* IO_ACX_SLV_MEM_CTL */
-+	0x0020, /* IO_ACX_SLV_END_CTL */
-+
-+	0x0034, /* IO_ACX_FEMR */
-+
-+	0x00b4, /* IO_ACX_INT_TRIG */
-+	0x00d4, /* IO_ACX_IRQ_MASK */
-+	/* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */
-+	0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */
-+	0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */
-+	0x00e8, /* IO_ACX_IRQ_ACK */
-+	0x00ec, /* IO_ACX_HINT_TRIG */
-+
-+	0x01d0, /* IO_ACX_ENABLE */
-+
-+	0x0338, /* IO_ACX_EEPROM_CTL */
-+	0x033c, /* IO_ACX_EEPROM_ADDR */
-+	0x0340, /* IO_ACX_EEPROM_DATA */
-+	0x0344, /* IO_ACX_EEPROM_CFG */
-+
-+	0x0350, /* IO_ACX_PHY_ADDR */
-+	0x0354, /* IO_ACX_PHY_DATA */
-+	0x0358, /* IO_ACX_PHY_CTL */
-+
-+	0x0374, /* IO_ACX_GPIO_OE */
-+
-+	0x037c, /* IO_ACX_GPIO_OUT */
-+
-+	0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */
-+	0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */
-+	0x0390, /* IO_ACX_EEPROM_INFORMATION */
-+
-+	0x0100, /* IO_ACX_EE_START */
-+	0x0104, /* IO_ACX_SOR_CFG */
-+	0x0108, /* IO_ACX_ECPU_CTRL */
-+};
-+
-+static void
-+dummy_netdev_init(struct net_device *ndev) {}
-+
-+static int __devinit
-+acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-+{
-+	acx111_ie_configoption_t co;
-+	unsigned long mem_region1 = 0;
-+	unsigned long mem_region2 = 0;
-+	unsigned long mem_region1_size;
-+	unsigned long mem_region2_size;
-+	unsigned long phymem1;
-+	unsigned long phymem2;
-+	void *mem1 = NULL;
-+	void *mem2 = NULL;
-+	acx_device_t *adev = NULL;
-+	struct net_device *ndev = NULL;
-+	const char *chip_name;
-+	int result = -EIO;
-+	int err;
-+	u8 chip_type;
-+
-+	FN_ENTER;
-+
-+	/* Enable the PCI device */
-+	if (pci_enable_device(pdev)) {
-+		printk("acx: pci_enable_device() FAILED\n");
-+		result = -ENODEV;
-+		goto fail_pci_enable_device;
-+	}
-+
-+	/* enable busmastering (required for CardBus) */
-+	pci_set_master(pdev);
-+
-+	/* FIXME: prism54 calls pci_set_mwi() here,
-+	 * should we do/support the same? */
-+
-+	/* chiptype is u8 but id->driver_data is ulong
-+	** Works for now (possible values are 1 and 2) */
-+	chip_type = (u8)id->driver_data;
-+	/* acx100 and acx111 have different PCI memory regions */
-+	if (chip_type == CHIPTYPE_ACX100) {
-+		chip_name = "ACX100";
-+		mem_region1 = PCI_ACX100_REGION1;
-+		mem_region1_size  = PCI_ACX100_REGION1_SIZE;
-+
-+		mem_region2 = PCI_ACX100_REGION2;
-+		mem_region2_size  = PCI_ACX100_REGION2_SIZE;
-+	} else if (chip_type == CHIPTYPE_ACX111) {
-+		chip_name = "ACX111";
-+		mem_region1 = PCI_ACX111_REGION1;
-+		mem_region1_size  = PCI_ACX111_REGION1_SIZE;
-+
-+		mem_region2 = PCI_ACX111_REGION2;
-+		mem_region2_size  = PCI_ACX111_REGION2_SIZE;
-+	} else {
-+		printk("acx: unknown chip type 0x%04X\n", chip_type);
-+		goto fail_unknown_chiptype;
-+	}
-+
-+	/* Figure out our resources */
-+	phymem1 = pci_resource_start(pdev, mem_region1);
-+	phymem2 = pci_resource_start(pdev, mem_region2);
-+	if (!request_mem_region(phymem1, pci_resource_len(pdev, mem_region1), "acx_1")) {
-+		printk("acx: cannot reserve PCI memory region 1 (are you sure "
-+			"you have CardBus support in kernel?)\n");
-+		goto fail_request_mem_region1;
-+	}
-+	if (!request_mem_region(phymem2, pci_resource_len(pdev, mem_region2), "acx_2")) {
-+		printk("acx: cannot reserve PCI memory region 2\n");
-+		goto fail_request_mem_region2;
-+	}
-+	
-+	/* this used to be ioremap(), but ioremap_nocache()
-+	 * is much less risky, right? (and slower?)
-+	 * FIXME: we may want to go back to cached variant if it's
-+	 * certain that our code really properly handles
-+	 * cached operation (memory barriers, volatile?, ...)
-+	 * (but always keep this comment here regardless!)
-+	 * Possibly make this a driver config setting? */
-+	
-+	mem1 = ioremap_nocache(phymem1, mem_region1_size);
-+	if (!mem1) {
-+		printk("acx: ioremap() FAILED\n");
-+		goto fail_ioremap1;
-+	}
-+	mem2 = ioremap_nocache(phymem2, mem_region2_size);
-+	if (!mem2) {
-+		printk("acx: ioremap() #2 FAILED\n");
-+		goto fail_ioremap2;
-+	}
-+
-+	printk("acx: found %s-based wireless network card at %s, irq:%d, "
-+		"phymem1:0x%lX, phymem2:0x%lX, mem1:0x%p, mem1_size:%ld, "
-+		"mem2:0x%p, mem2_size:%ld\n",
-+		chip_name, pci_name(pdev), pdev->irq, phymem1, phymem2,
-+		mem1, mem_region1_size,
-+		mem2, mem_region2_size);
-+	log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug);
-+
-+	if (0 == pdev->irq) {
-+		printk("acx: can't use IRQ 0\n");
-+		goto fail_irq;
-+	}
-+
-+	ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init);
-+	/* (NB: memsets to 0 entire area) */
-+	if (!ndev) {
-+		printk("acx: no memory for netdevice struct\n");
-+		goto fail_alloc_netdev;
-+	}
-+
-+	ether_setup(ndev);
-+	ndev->open = &acxpci_e_open;
-+	ndev->stop = &acxpci_e_close;
-+	ndev->hard_start_xmit = &acx_i_start_xmit;
-+	ndev->get_stats = &acx_e_get_stats;
-+#if IW_HANDLER_VERSION <= 5
-+	ndev->get_wireless_stats = &acx_e_get_wireless_stats;
-+#endif
-+	ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
-+	ndev->set_multicast_list = &acxpci_i_set_multicast_list;
-+	ndev->tx_timeout = &acxpci_i_tx_timeout;
-+	ndev->change_mtu = &acx_e_change_mtu;
-+	ndev->watchdog_timeo = 4 * HZ;
-+	ndev->irq = pdev->irq;
-+	ndev->base_addr = pci_resource_start(pdev, 0);
-+
-+	adev = ndev2adev(ndev);
-+	spin_lock_init(&adev->lock);	/* initial state: unlocked */
-+	/* We do not start with downed sem: we want PARANOID_LOCKING to work */
-+	sema_init(&adev->sem, 1);	/* initial state: 1 (upped) */
-+	/* since nobody can see new netdev yet, we can as well
-+	** just _presume_ that we're under sem (instead of actually taking it): */
-+	/* acx_sem_lock(adev); */
-+	adev->pdev = pdev;
-+	adev->ndev = ndev;
-+	adev->dev_type = DEVTYPE_PCI;
-+	adev->chip_type = chip_type;
-+	adev->chip_name = chip_name;
-+	adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111;
-+	adev->membase = phymem1;
-+	adev->iobase = mem1;
-+	adev->membase2 = phymem2;
-+	adev->iobase2 = mem2;
-+	/* to find crashes due to weird driver access
-+	 * to unconfigured interface (ifup) */
-+	adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead;
-+
-+#ifdef NONESSENTIAL_FEATURES
-+	acx_show_card_eeprom_id(adev);
-+#endif /* NONESSENTIAL_FEATURES */
-+
-+#ifdef SET_MODULE_OWNER
-+	SET_MODULE_OWNER(ndev);
-+#endif
-+	SET_NETDEV_DEV(ndev, &pdev->dev);
-+
-+	log(L_IRQ|L_INIT, "using IRQ %d\n", pdev->irq);
-+
-+	/* need to be able to restore PCI state after a suspend */
-+	pci_save_state(pdev);
-+	pci_set_drvdata(pdev, ndev);
-+
-+	/* ok, pci setup is finished, now start initializing the card */
-+
-+	/* NB: read_reg() reads may return bogus data before reset_dev(),
-+	 * since the firmware which directly controls large parts of the I/O
-+	 * registers isn't initialized yet.
-+	 * acx100 seems to be more affected than acx111 */
-+	if (OK != acxpci_s_reset_dev(adev))
-+		goto fail_reset;
-+
-+	if (IS_ACX100(adev)) {
-+		/* ACX100: configopt struct in cmd mailbox - directly after reset */
-+		memcpy_fromio(&co, adev->cmd_area, sizeof(co));
-+	}
-+
-+	if (OK != acx_s_init_mac(adev))
-+		goto fail_init_mac;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111: configopt struct needs to be queried after full init */
-+		acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS);
-+	}
-+
-+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */
-+	if (OK != acxpci_read_eeprom_byte(adev, 0x05, &adev->eeprom_version))
-+		goto fail_read_eeprom_version;
-+
-+	acx_s_parse_configoption(adev, &co);
-+	acx_s_set_defaults(adev);
-+	acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */
-+	acx_display_hardware_details(adev);
-+
-+	/* Register the card, AFTER everything else has been set up,
-+	 * since otherwise an ioctl could step on our feet due to
-+	 * firmware operations happening in parallel or uninitialized data */
-+	err = register_netdev(ndev);
-+	if (OK != err) {
-+		printk("acx: register_netdev() FAILED: %d\n", err);
-+		goto fail_register_netdev;
-+	}
-+
-+	acx_proc_register_entries(ndev);
-+
-+	/* Now we have our device, so make sure the kernel doesn't try
-+	 * to send packets even though we're not associated to a network yet */
-+	acx_stop_queue(ndev, "on probe");
-+	acx_carrier_off(ndev, "on probe");
-+
-+	/* after register_netdev() userspace may start working with dev
-+	 * (in particular, on other CPUs), we only need to up the sem */
-+	/* acx_sem_unlock(adev); */
-+
-+	printk("acx "ACX_RELEASE": net device %s, driver compiled "
-+		"against wireless extensions %d and Linux %s\n",
-+		ndev->name, WIRELESS_EXT, UTS_RELEASE);
-+
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	result = OK;
-+	goto done;
-+
-+	/* error paths: undo everything in reverse order... */
-+
-+fail_register_netdev:
-+
-+	acxpci_s_delete_dma_regions(adev);
-+	pci_set_drvdata(pdev, NULL);
-+
-+fail_init_mac:
-+fail_read_eeprom_version:
-+fail_reset:
-+
-+	free_netdev(ndev);
-+fail_alloc_netdev:
-+fail_irq:
-+
-+	iounmap(mem2);
-+fail_ioremap2:
-+
-+	iounmap(mem1);
-+fail_ioremap1:
-+
-+	release_mem_region(pci_resource_start(pdev, mem_region2),
-+			   pci_resource_len(pdev, mem_region2));
-+fail_request_mem_region2:
-+
-+	release_mem_region(pci_resource_start(pdev, mem_region1),
-+			   pci_resource_len(pdev, mem_region1));
-+fail_request_mem_region1:
-+fail_unknown_chiptype:
-+
-+	pci_disable_device(pdev);
-+fail_pci_enable_device:
-+
-+	pci_set_power_state(pdev, PCI_D3hot);
-+
-+done:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_remove
-+**
-+** Shut device down (if not hot unplugged)
-+** and deallocate PCI resources for the acx chip.
-+**
-+** pdev - ptr to PCI device structure containing info about pci configuration
-+*/
-+static void __devexit
-+acxpci_e_remove(struct pci_dev *pdev)
-+{
-+	struct net_device *ndev;
-+	acx_device_t *adev;
-+	unsigned long mem_region1, mem_region2;
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	ndev = (struct net_device*) pci_get_drvdata(pdev);
-+	if (!ndev) {
-+		log(L_DEBUG, "%s: card is unused. Skipping any release code\n",
-+			__func__);
-+		goto end;
-+	}
-+
-+	adev = ndev2adev(ndev);
-+
-+	/* If device wasn't hot unplugged... */
-+	if (adev_present(adev)) {
-+
-+		acx_sem_lock(adev);
-+
-+		/* disable both Tx and Rx to shut radio down properly */
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+		acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+
-+#ifdef REDUNDANT
-+		/* put the eCPU to sleep to save power
-+		 * Halting is not possible currently,
-+		 * since not supported by all firmware versions */
-+		acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0);
-+#endif
-+		acx_lock(adev, flags);
-+		/* disable power LED to save power :-) */
-+		log(L_INIT, "switching off power LED to save power\n");
-+		acxpci_l_power_led(adev, 0);
-+		/* stop our eCPU */
-+		if (IS_ACX111(adev)) {
-+			/* FIXME: does this actually keep halting the eCPU?
-+			 * I don't think so...
-+			 */
-+			acxpci_l_reset_mac(adev);
-+		} else {
-+			u16 temp;
-+			/* halt eCPU */
-+			temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1;
-+			write_reg16(adev, IO_ACX_ECPU_CTRL, temp);
-+			write_flush(adev);
-+		}
-+		acx_unlock(adev, flags);
-+
-+		acx_sem_unlock(adev);
-+	}
-+
-+	/* unregister the device to not let the kernel
-+	 * (e.g. ioctls) access a half-deconfigured device
-+	 * NB: this will cause acxpci_e_close() to be called,
-+	 * thus we shouldn't call it under sem! */
-+	log(L_INIT, "removing device %s\n", ndev->name);
-+	unregister_netdev(ndev);
-+
-+	/* unregister_netdev ensures that no references to us left.
-+	 * For paranoid reasons we continue to follow the rules */
-+	acx_sem_lock(adev);
-+
-+	if (adev->dev_state_mask & ACX_STATE_IFACE_UP) {
-+		acxpci_s_down(ndev);
-+		CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	}
-+
-+	acx_proc_unregister_entries(ndev);
-+
-+	if (IS_ACX100(adev)) {
-+		mem_region1 = PCI_ACX100_REGION1;
-+		mem_region2 = PCI_ACX100_REGION2;
-+	} else {
-+		mem_region1 = PCI_ACX111_REGION1;
-+		mem_region2 = PCI_ACX111_REGION2;
-+	}
-+
-+	/* finally, clean up PCI bus state */
-+	acxpci_s_delete_dma_regions(adev);
-+	if (adev->iobase) iounmap(adev->iobase);
-+	if (adev->iobase2) iounmap(adev->iobase2);
-+	release_mem_region(pci_resource_start(pdev, mem_region1),
-+			   pci_resource_len(pdev, mem_region1));
-+	release_mem_region(pci_resource_start(pdev, mem_region2),
-+			   pci_resource_len(pdev, mem_region2));
-+	pci_disable_device(pdev);
-+
-+	/* remove dev registration */
-+	pci_set_drvdata(pdev, NULL);
-+
-+	acx_sem_unlock(adev);
-+
-+	/* Free netdev (quite late,
-+	 * since otherwise we might get caught off-guard
-+	 * by a netdev timeout handler execution
-+	 * expecting to see a working dev...) */
-+	free_netdev(ndev);
-+
-+	/* put device into ACPI D3 mode (shutdown) */
-+	pci_set_power_state(pdev, PCI_D3hot);
-+
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** TODO: PM code needs to be fixed / debugged / tested.
-+*/
-+#ifdef CONFIG_PM
-+static int
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+acxpci_e_suspend(struct pci_dev *pdev, pm_message_t state)
-+#else
-+acxpci_e_suspend(struct pci_dev *pdev, u32 state)
-+#endif
-+{
-+	struct net_device *ndev = pci_get_drvdata(pdev);
-+	acx_device_t *adev;
-+
-+	FN_ENTER;
-+	printk("acx: suspend handler is experimental!\n");
-+	printk("sus: dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		goto end;
-+
-+	adev = ndev2adev(ndev);
-+	printk("sus: adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	netif_device_detach(ndev);	/* this one cannot sleep */
-+	acxpci_s_down(ndev);
-+	/* down() does not set it to 0xffff, but here we really want that */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	acxpci_s_delete_dma_regions(adev);
-+	pci_save_state(pdev);
-+	pci_set_power_state(pdev, PCI_D3hot);
-+
-+	acx_sem_unlock(adev);
-+end:
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+static int
-+acxpci_e_resume(struct pci_dev *pdev)
-+{
-+	struct net_device *ndev = pci_get_drvdata(pdev);
-+	acx_device_t *adev;
-+
-+	FN_ENTER;
-+
-+	printk("acx: resume handler is experimental!\n");
-+	printk("rsm: got dev %p\n", ndev);
-+
-+	if (!netif_running(ndev))
-+		goto end;
-+
-+	adev = ndev2adev(ndev);
-+	printk("rsm: got adev %p\n", adev);
-+
-+	acx_sem_lock(adev);
-+
-+	pci_set_power_state(pdev, PCI_D0);
-+	printk("rsm: power state PCI_D0 set\n");
-+	pci_restore_state(pdev);
-+	printk("rsm: PCI state restored\n");
-+
-+	if (OK != acxpci_s_reset_dev(adev))
-+		goto end_unlock;
-+	printk("rsm: device reset done\n");
-+	if (OK != acx_s_init_mac(adev))
-+		goto end_unlock;
-+	printk("rsm: init MAC done\n");
-+
-+	acxpci_s_up(ndev);
-+	printk("rsm: acx up done\n");
-+
-+	/* now even reload all card parameters as they were before suspend,
-+	 * and possibly be back in the network again already :-) */
-+	if (ACX_STATE_IFACE_UP & adev->dev_state_mask) {
-+		adev->set_mask = GETSET_ALL;
-+		acx_s_update_card_settings(adev);
-+		printk("rsm: settings updated\n");
-+	}
-+	netif_device_attach(ndev);
-+	printk("rsm: device attached\n");
-+
-+end_unlock:
-+	acx_sem_unlock(adev);
-+end:
-+	/* we need to return OK here anyway, right? */
-+	FN_EXIT0;
-+	return OK;
-+}
-+#endif /* CONFIG_PM */
-+
-+
-+/***********************************************************************
-+** acxpci_s_up
-+**
-+** This function is called by acxpci_e_open (when ifconfig sets the device as up)
-+**
-+** Side effects:
-+** - Enables on-card interrupt requests
-+** - calls acx_s_start
-+*/
-+
-+static void
-+enable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask);
-+	write_reg16(adev, IO_ACX_FEMR, 0x8000);
-+	adev->irqs_active = 1;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxpci_s_up(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+	enable_acx_irq(adev);
-+	acx_unlock(adev, flags);
-+
-+	/* acx fw < 1.9.3.e has a hardware timer, and older drivers
-+	** used to use it. But we don't do that anymore, our OS
-+	** has reliable software timers */
-+	init_timer(&adev->mgmt_timer);
-+	adev->mgmt_timer.function = acx_i_timer;
-+	adev->mgmt_timer.data = (unsigned long)adev;
-+
-+	/* Need to set ACX_STATE_IFACE_UP first, or else
-+	** timer won't be started by acx_set_status() */
-+	SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_2_STA:
-+		/* actual scan cmd will happen in start() */
-+		acx_set_status(adev, ACX_STATUS_1_SCANNING); break;
-+	case ACX_MODE_3_AP:
-+	case ACX_MODE_MONITOR:
-+		acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break;
-+	}
-+
-+	acx_s_start(adev);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_down
-+**
-+** NB: device may be already hot unplugged if called from acxpci_e_remove()
-+**
-+** Disables on-card interrupt request, stops softirq and timer, stops queue,
-+** sets status == STOPPED
-+*/
-+
-+static void
-+disable_acx_irq(acx_device_t *adev)
-+{
-+	FN_ENTER;
-+
-+	/* I guess mask is not 0xffff because acx100 won't signal
-+	** cmd completion then (needed for ifup).
-+	** Someone with acx100 please confirm */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	adev->irqs_active = 0;
-+	FN_EXIT0;
-+}
-+
-+static void
-+acxpci_s_down(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	/* Disable IRQs first, so that IRQs cannot race with us */
-+	/* then wait until interrupts have finished executing on other CPUs */
-+	acx_lock(adev, flags);
-+	disable_acx_irq(adev);
-+	synchronize_irq(adev->pdev->irq);
-+	acx_unlock(adev, flags);
-+
-+	/* we really don't want to have an asynchronous tasklet disturb us
-+	** after something vital for its job has been shut down, so
-+	** end all remaining work now.
-+	**
-+	** NB: carrier_off (done by set_status below) would lead to
-+	** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK().
-+	** That's why we do FLUSH first.
-+	**
-+	** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK()
-+	** waits for acx_e_after_interrupt_task to complete if it is running
-+	** on another CPU, but acx_e_after_interrupt_task
-+	** will sleep on sem forever, because it is taken by us!
-+	** Work around that by temporary sem unlock.
-+	** This will fail miserably if we'll be hit by concurrent
-+	** iwconfig or something in between. TODO! */
-+	acx_sem_unlock(adev);
-+	FLUSH_SCHEDULED_WORK();
-+	acx_sem_lock(adev);
-+
-+	/* This is possible:
-+	** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task ->
-+	** -> set_status(ASSOCIATED) -> wake_queue()
-+	** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK
-+	** lock/unlock is just paranoia, maybe not needed */
-+	acx_lock(adev, flags);
-+	acx_stop_queue(ndev, "on ifdown");
-+	acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+	acx_unlock(adev, flags);
-+
-+	/* kernel/timer.c says it's illegal to del_timer_sync()
-+	** a timer which restarts itself. We guarantee this cannot
-+	** ever happen because acx_i_timer() never does this if
-+	** status is ACX_STATUS_0_STOPPED */
-+	del_timer_sync(&adev->mgmt_timer);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_open
-+**
-+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP
-+** from clear to set. In other words: ifconfig up.
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxpci_e_open(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	int result = OK;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	acx_init_task_scheduler(adev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */
-+
-+	/* request shared IRQ handler */
-+	if (request_irq(ndev->irq, acxpci_i_interrupt, SA_SHIRQ, ndev->name, ndev)) {
-+		printk("%s: request_irq FAILED\n", ndev->name);
-+		result = -EAGAIN;
-+		goto done;
-+	}
-+	log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq);
-+
-+	/* ifup device */
-+	acxpci_s_up(ndev);
-+
-+	/* We don't currently have to do anything else.
-+	 * The setup of the MAC should be subsequently completed via
-+	 * the mlme commands.
-+	 * Higher layers know we're ready from dev->start==1 and
-+	 * dev->tbusy==0.  Our rx path knows to pass up received/
-+	 * frames because of dev->flags&IFF_UP is true.
-+	 */
-+done:
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_close
-+**
-+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
-+** from set to clear. I.e. called by "ifconfig DEV down"
-+**
-+** Returns:
-+**	0	success
-+**	>0	f/w reported error
-+**	<0	driver reported error
-+*/
-+static int
-+acxpci_e_close(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* ifdown device */
-+	CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	if (netif_device_present(ndev)) {
-+		acxpci_s_down(ndev);
-+	}
-+
-+	/* disable all IRQs, release shared IRQ handler */
-+	write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+	write_reg16(adev, IO_ACX_FEMR, 0x0);
-+	free_irq(ndev->irq, ndev);
-+
-+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */
-+
-+	/* We currently don't have to do anything else.
-+	 * Higher layers know we're not ready from dev->start==0 and
-+	 * dev->tbusy==1.  Our rx path knows to not pass up received
-+	 * frames because of dev->flags&IFF_UP is false.
-+	 */
-+	acx_sem_unlock(adev);
-+
-+	log(L_INIT, "closed device\n");
-+	FN_EXIT0;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_i_tx_timeout
-+**
-+** Called from network core. Must not sleep!
-+*/
-+static void
-+acxpci_i_tx_timeout(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	unsigned int tx_num_cleaned;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* clean processed tx descs, they may have been completely full */
-+	tx_num_cleaned = acxpci_l_clean_txdesc(adev);
-+
-+	/* nothing cleaned, yet (almost) no free buffers available?
-+	 * --> clean all tx descs, no matter which status!!
-+	 * Note that I strongly suspect that doing emergency cleaning
-+	 * may confuse the firmware. This is a last ditch effort to get
-+	 * ANYTHING to work again...
-+	 *
-+	 * TODO: it's best to simply reset & reinit hw from scratch...
-+	 */
-+	if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) {
-+		printk("%s: FAILED to free any of the many full tx buffers. "
-+			"Switching to emergency freeing. "
-+			"Please report!\n", ndev->name);
-+		acxpci_l_clean_txdesc_emergency(adev);
-+	}
-+
-+	if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status))
-+		acx_wake_queue(ndev, "after tx timeout");
-+
-+	/* stall may have happened due to radio drift, so recalib radio */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+
-+	/* do unimportant work last */
-+	printk("%s: tx timeout!\n", ndev->name);
-+	adev->stats.tx_errors++;
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_i_set_multicast_list
-+** FIXME: most likely needs refinement
-+*/
-+static void
-+acxpci_i_set_multicast_list(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+
-+	/* firmwares don't have allmulti capability,
-+	 * so just use promiscuous mode instead in this case. */
-+	if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
-+		SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		/* let kernel know in case *we* needed to set promiscuous */
-+		ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI);
-+	} else {
-+		CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-+		SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-+		SET_BIT(adev->set_mask, SET_RXCONFIG);
-+		ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI);
-+	}
-+
-+	/* cannot update card settings directly here, atomic context */
-+	acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG);
-+
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_l_process_rxdesc
-+**
-+** Called directly and only from the IRQ handler
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_rxbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_rxbuffer(const acx_device_t *adev)
-+{
-+	register const struct rxhostdesc *rxhostdesc;
-+	int i;
-+	/* no FN_ENTER here, we don't want that */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+	if (unlikely(!rxhostdesc)) return;
-+	for (i = 0; i < RX_CNT; i++) {
-+		if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			printk("rx: buf %d full\n", i);
-+		rxhostdesc++;
-+	}
-+}
-+#endif
-+
-+static void
-+acxpci_l_process_rxdesc(acx_device_t *adev)
-+{
-+	register rxhostdesc_t *hostdesc;
-+	unsigned count, tail;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(acx_debug & L_BUFR))
-+		log_rxbuffer(adev);
-+
-+	/* First, have a loop to determine the first descriptor that's
-+	 * full, just in case there's a mismatch between our current
-+	 * rx_tail and the full descriptor we're supposed to handle. */
-+	tail = adev->rx_tail;
-+	count = RX_CNT;
-+	while (1) {
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+		/* advance tail regardless of outcome of the below test */
-+		tail = (tail + 1) % RX_CNT;
-+
-+		if ((hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			break;		/* found it! */
-+
-+		if (unlikely(!--count))	/* hmm, no luck: all descs empty, bail out */
-+			goto end;
-+	}
-+
-+	/* now process descriptors, starting with the first we figured out */
-+	while (1) {
-+		log(L_BUFR, "rx: tail=%u Ctl_16=%04X Status=%08X\n",
-+			tail, hostdesc->Ctl_16, hostdesc->Status);
-+
-+		acx_l_process_rxbuf(adev, hostdesc->data);
-+
-+		hostdesc->Status = 0;
-+		/* flush all writes before adapter sees CTL_HOSTOWN change */
-+		wmb();
-+		/* Host no longer owns this, needs to be LAST */
-+		CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN));
-+
-+		/* ok, descriptor is handled, now check the next descriptor */
-+		hostdesc = &adev->rxhostdesc_start[tail];
-+
-+		/* if next descriptor is empty, then bail out */
-+		if (!(hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 || !(hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)))
-+			break;
-+
-+		tail = (tail + 1) % RX_CNT;
-+	}
-+end:
-+	adev->rx_tail = tail;
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_i_interrupt
-+**
-+** IRQ handler (atomic context, must not sleep, blah, blah)
-+*/
-+
-+/* scan is complete. all frames now on the receive queue are valid */
-+#define INFO_SCAN_COMPLETE      0x0001
-+#define INFO_WEP_KEY_NOT_FOUND  0x0002
-+/* hw has been reset as the result of a watchdog timer timeout */
-+#define INFO_WATCH_DOG_RESET    0x0003
-+/* failed to send out NULL frame from PS mode notification to AP */
-+/* recommended action: try entering 802.11 PS mode again */
-+#define INFO_PS_FAIL            0x0004
-+/* encryption/decryption process on a packet failed */
-+#define INFO_IV_ICV_FAILURE     0x0005
-+
-+/* Info mailbox format:
-+2 bytes: type
-+2 bytes: status
-+more bytes may follow
-+    rumors say about status:
-+	0x0000 info available (set by hw)
-+	0x0001 information received (must be set by host)
-+	0x1000 info available, mailbox overflowed (messages lost) (set by hw)
-+    but in practice we've seen:
-+	0x9000 when we did not set status to 0x0001 on prev message
-+	0x1001 when we did set it
-+	0x0000 was never seen
-+    conclusion: this is really a bitfield:
-+    0x1000 is 'info available' bit
-+    'mailbox overflowed' bit is 0x8000, not 0x1000
-+    value of 0x0000 probably means that there are no messages at all
-+    P.S. I dunno how in hell hw is supposed to notice that messages are lost -
-+    it does NOT clear bit 0x0001, and this bit will probably stay forever set
-+    after we set it once. Let's hope this will be fixed in firmware someday
-+*/
-+
-+static void
-+handle_info_irq(acx_device_t *adev)
-+{
-+#if ACX_DEBUG
-+	static const char * const info_type_msg[] = {
-+		"(unknown)",
-+		"scan complete",
-+		"WEP key not found",
-+		"internal watchdog reset was done",
-+		"failed to send powersave (NULL frame) notification to AP",
-+		"encrypt/decrypt on a packet has failed",
-+		"TKIP tx keys disabled",
-+		"TKIP rx keys disabled",
-+		"TKIP rx: key ID not found",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"???",
-+		"TKIP IV value exceeds thresh"
-+	};
-+#endif
-+	u32 info_type, info_status;
-+
-+	info_type = readl(adev->info_area);
-+	info_status = (info_type >> 16);
-+	info_type = (u16)info_type;
-+
-+	/* inform fw that we have read this info message */
-+	writel(info_type | 0x00010000, adev->info_area);
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK);
-+	write_flush(adev);
-+
-+	log(L_CTL, "info_type:%04X info_status:%04X\n",
-+			info_type, info_status);
-+
-+	log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n",
-+		info_status, info_type,
-+		info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ?
-+				0 : info_type]
-+	);
-+}
-+
-+
-+static void
-+log_unusual_irq(u16 irqtype) {
-+	/*
-+	if (!printk_ratelimit())
-+		return;
-+	*/
-+
-+	printk("acx: got");
-+	if (irqtype & HOST_INT_RX_DATA) {
-+		printk(" Rx_Data");
-+	}
-+		/* HOST_INT_TX_COMPLETE   */
-+	if (irqtype & HOST_INT_TX_XFER) {
-+		printk(" Tx_Xfer");
-+	}
-+		/* HOST_INT_RX_COMPLETE   */
-+	if (irqtype & HOST_INT_DTIM) {
-+		printk(" DTIM");
-+	}
-+	if (irqtype & HOST_INT_BEACON) {
-+		printk(" Beacon");
-+	}
-+	if (irqtype & HOST_INT_TIMER) {
-+		log(L_IRQ, " Timer");
-+	}
-+	if (irqtype & HOST_INT_KEY_NOT_FOUND) {
-+		printk(" Key_Not_Found");
-+	}
-+	if (irqtype & HOST_INT_IV_ICV_FAILURE) {
-+		printk(" IV_ICV_Failure (crypto)");
-+	}
-+		/* HOST_INT_CMD_COMPLETE  */
-+		/* HOST_INT_INFO          */
-+	if (irqtype & HOST_INT_OVERFLOW) {
-+		printk(" Overflow");
-+	}
-+	if (irqtype & HOST_INT_PROCESS_ERROR) {
-+		printk(" Process_Error");
-+	}
-+		/* HOST_INT_SCAN_COMPLETE */
-+	if (irqtype & HOST_INT_FCS_THRESHOLD) {
-+		printk(" FCS_Threshold");
-+	}
-+	if (irqtype & HOST_INT_UNKNOWN) {
-+		printk(" Unknown");
-+	}
-+	printk(" IRQ(s)\n");
-+}
-+
-+
-+static void
-+update_link_quality_led(acx_device_t *adev)
-+{
-+	int qual;
-+
-+	qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise);
-+	if (qual > adev->brange_max_quality)
-+		qual = adev->brange_max_quality;
-+
-+	if (time_after(jiffies, adev->brange_time_last_state_change +
-+				(HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) {
-+		acxpci_l_power_led(adev, (adev->brange_last_state == 0));
-+		adev->brange_last_state ^= 1; /* toggle */
-+		adev->brange_time_last_state_change = jiffies;
-+	}
-+}
-+
-+
-+#define MAX_IRQLOOPS_PER_JIFFY  (20000/HZ) /* a la orinoco.c */
-+
-+static irqreturn_t
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxpci_i_interrupt(int irq, void *dev_id)
-+#else
-+acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	unsigned long flags;
-+	unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY;
-+	register u16 irqtype;
-+	u16 unmasked;
-+
-+	adev = ndev2adev((struct net_device*)dev_id);
-+
-+	/* LOCKING: can just spin_lock() since IRQs are disabled anyway.
-+	 * I am paranoid */
-+	acx_lock(adev, flags);
-+
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	if (unlikely(0xffff == unmasked)) {
-+		/* 0xffff value hints at missing hardware,
-+		 * so don't do anything.
-+		 * Not very clean, but other drivers do the same... */
-+		log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n");
-+		goto none;
-+	}
-+
-+	/* We will check only "interesting" IRQ types */
-+	irqtype = unmasked & ~adev->irq_mask;
-+	if (!irqtype) {
-+		/* We are on a shared IRQ line and it wasn't our IRQ */
-+		log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n",
-+			unmasked, adev->irq_mask);
-+		goto none;
-+	}
-+
-+	/* Done here because IRQ_NONEs taking three lines of log
-+	** drive me crazy */
-+	FN_ENTER;
-+
-+#define IRQ_ITERATE 1
-+#if IRQ_ITERATE
-+if (jiffies != adev->irq_last_jiffies) {
-+	adev->irq_loops_this_jiffy = 0;
-+	adev->irq_last_jiffies = jiffies;
-+}
-+
-+/* safety condition; we'll normally abort loop below
-+ * in case no IRQ type occurred */
-+while (likely(--irqcount)) {
-+#endif
-+	/* ACK all IRQs ASAP */
-+	write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff);
-+
-+	log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n",
-+				unmasked, adev->irq_mask, irqtype);
-+
-+	/* Handle most important IRQ types first */
-+	if (irqtype & HOST_INT_RX_COMPLETE) {
-+		log(L_IRQ, "got Rx_Complete IRQ\n");
-+		acxpci_l_process_rxdesc(adev);
-+	}
-+	if (irqtype & HOST_INT_TX_COMPLETE) {
-+		log(L_IRQ, "got Tx_Complete IRQ\n");
-+		/* don't clean up on each Tx complete, wait a bit
-+		 * unless we're going towards full, in which case
-+		 * we do it immediately, too (otherwise we might lockup
-+		 * with a full Tx buffer if we go into
-+		 * acxpci_l_clean_txdesc() at a time when we won't wakeup
-+		 * the net queue in there for some reason...) */
-+		if (adev->tx_free <= TX_START_CLEAN) {
-+#if TX_CLEANUP_IN_SOFTIRQ
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP);
-+#else
-+			acxpci_l_clean_txdesc(adev);
-+#endif
-+		}
-+	}
-+
-+	/* Less frequent ones */
-+	if (irqtype & (0
-+		| HOST_INT_CMD_COMPLETE
-+		| HOST_INT_INFO
-+		| HOST_INT_SCAN_COMPLETE
-+	)) {
-+		if (irqtype & HOST_INT_CMD_COMPLETE) {
-+			log(L_IRQ, "got Command_Complete IRQ\n");
-+			/* save the state for the running issue_cmd() */
-+			SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE);
-+		}
-+		if (irqtype & HOST_INT_INFO) {
-+			handle_info_irq(adev);
-+		}
-+		if (irqtype & HOST_INT_SCAN_COMPLETE) {
-+			log(L_IRQ, "got Scan_Complete IRQ\n");
-+			/* need to do that in process context */
-+			acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN);
-+			/* remember that fw is not scanning anymore */
-+			SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE);
-+		}
-+	}
-+
-+	/* These we just log, but either they happen rarely
-+	 * or we keep them masked out */
-+	if (irqtype & (0
-+		| HOST_INT_RX_DATA
-+		/* | HOST_INT_TX_COMPLETE   */
-+		| HOST_INT_TX_XFER
-+		/* | HOST_INT_RX_COMPLETE   */
-+		| HOST_INT_DTIM
-+		| HOST_INT_BEACON
-+		| HOST_INT_TIMER
-+		| HOST_INT_KEY_NOT_FOUND
-+		| HOST_INT_IV_ICV_FAILURE
-+		/* | HOST_INT_CMD_COMPLETE  */
-+		/* | HOST_INT_INFO          */
-+		| HOST_INT_OVERFLOW
-+		| HOST_INT_PROCESS_ERROR
-+		/* | HOST_INT_SCAN_COMPLETE */
-+		| HOST_INT_FCS_THRESHOLD
-+		| HOST_INT_UNKNOWN
-+	)) {
-+		log_unusual_irq(irqtype);
-+	}
-+
-+#if IRQ_ITERATE
-+	unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR);
-+	irqtype = unmasked & ~adev->irq_mask;
-+	/* Bail out if no new IRQ bits or if all are masked out */
-+	if (!irqtype)
-+		break;
-+
-+	if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) {
-+		printk(KERN_ERR "acx: too many interrupts per jiffy!\n");
-+		/* Looks like card floods us with IRQs! Try to stop that */
-+		write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff);
-+		/* This will short-circuit all future attempts to handle IRQ.
-+		 * We cant do much more... */
-+		adev->irq_mask = 0;
-+		break;
-+	}
-+}
-+#endif
-+	/* Routine to perform blink with range */
-+	if (unlikely(adev->led_power == 2))
-+		update_link_quality_led(adev);
-+
-+/* handled: */
-+	/* write_flush(adev); - not needed, last op was read anyway */
-+	acx_unlock(adev, flags);
-+	FN_EXIT0;
-+	return IRQ_HANDLED;
-+
-+none:
-+	acx_unlock(adev, flags);
-+	return IRQ_NONE;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_l_power_led
-+*/
-+void
-+acxpci_l_power_led(acx_device_t *adev, int enable)
-+{
-+	u16 gpio_pled =	IS_ACX111(adev) ? 0x0040 : 0x0800;
-+
-+	/* A hack. Not moving message rate limiting to adev->xxx
-+	 * (it's only a debug message after all) */
-+	static int rate_limit = 0;
-+
-+	if (rate_limit++ < 3)
-+		log(L_IOCTL, "Please report in case toggling the power "
-+				"LED doesn't work for your card!\n");
-+	if (enable)
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled);
-+	else
-+		write_reg16(adev, IO_ACX_GPIO_OUT,
-+			read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled);
-+}
-+
-+
-+/***********************************************************************
-+** Ioctls
-+*/
-+
-+/***********************************************************************
-+*/
-+int
-+acx111pci_ioctl_info(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+#if ACX_DEBUG > 1
-+	acx_device_t *adev = ndev2adev(ndev);
-+	rxdesc_t *rxdesc;
-+	txdesc_t *txdesc;
-+	rxhostdesc_t *rxhostdesc;
-+	txhostdesc_t *txhostdesc;
-+	struct acx111_ie_memoryconfig memconf;
-+	struct acx111_ie_queueconfig queueconf;
-+	unsigned long flags;
-+	int i;
-+	char memmap[0x34];
-+	char rxconfig[0x8];
-+	char fcserror[0x8];
-+	char ratefallback[0x5];
-+
-+	if ( !(acx_debug & (L_IOCTL|L_DEBUG)) )
-+		return OK;
-+	/* using printk() since we checked debug flag already */
-+
-+	acx_sem_lock(adev);
-+
-+	if (!IS_ACX111(adev)) {
-+		printk("acx111-specific function called "
-+			"with non-acx111 chip, aborting\n");
-+		goto end_ok;
-+	}
-+
-+	/* get Acx111 Memory Configuration */
-+	memset(&memconf, 0, sizeof(memconf));
-+	/* BTW, fails with 12 (Write only) error code.
-+	** Retained for easy testing of issue_cmd error handling :) */
-+	acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG);
-+
-+	/* get Acx111 Queue Configuration */
-+	memset(&queueconf, 0, sizeof(queueconf));
-+	acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS);
-+
-+	/* get Acx111 Memory Map */
-+	memset(memmap, 0, sizeof(memmap));
-+	acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP);
-+
-+	/* get Acx111 Rx Config */
-+	memset(rxconfig, 0, sizeof(rxconfig));
-+	acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG);
-+
-+	/* get Acx111 fcs error count */
-+	memset(fcserror, 0, sizeof(fcserror));
-+	acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT);
-+
-+	/* get Acx111 rate fallback */
-+	memset(ratefallback, 0, sizeof(ratefallback));
-+	acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK);
-+
-+	/* force occurrence of a beacon interrupt */
-+	/* TODO: comment why is this necessary */
-+	write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON);
-+
-+	/* dump Acx111 Mem Configuration */
-+	printk("dump mem config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Number of stations: %1X\n"
-+		"Memory block size: %1X\n"
-+		"tx/rx memory block allocation: %1X\n"
-+		"count rx: %X / tx: %X queues\n"
-+		"options %1X\n"
-+		"fragmentation %1X\n"
-+		"Rx Queue 1 Count Descriptors: %X\n"
-+		"Rx Queue 1 Host Memory Start: %X\n"
-+		"Tx Queue 1 Count Descriptors: %X\n"
-+		"Tx Queue 1 Attributes: %X\n",
-+		memconf.len, (int) sizeof(memconf),
-+		memconf.no_of_stations,
-+		memconf.memory_block_size,
-+		memconf.tx_rx_memory_block_allocation,
-+		memconf.count_rx_queues, memconf.count_tx_queues,
-+		memconf.options,
-+		memconf.fragmentation,
-+		memconf.rx_queue1_count_descs,
-+	acx2cpu(memconf.rx_queue1_host_rx_start),
-+		memconf.tx_queue1_count_descs,
-+		memconf.tx_queue1_attributes);
-+
-+	/* dump Acx111 Queue Configuration */
-+	printk("dump queue head:\n"
-+		"data read: %d, struct size: %d\n"
-+		"tx_memory_block_address (from card): %X\n"
-+		"rx_memory_block_address (from card): %X\n"
-+		"rx1_queue address (from card): %X\n"
-+		"tx1_queue address (from card): %X\n"
-+		"tx1_queue attributes (from card): %X\n",
-+		queueconf.len, (int) sizeof(queueconf),
-+		queueconf.tx_memory_block_address,
-+		queueconf.rx_memory_block_address,
-+		queueconf.rx1_queue_address,
-+		queueconf.tx1_queue_address,
-+		queueconf.tx1_attributes);
-+
-+	/* dump Acx111 Mem Map */
-+	printk("dump mem map:\n"
-+		"data read: %d, struct size: %d\n"
-+		"Code start: %X\n"
-+		"Code end: %X\n"
-+		"WEP default key start: %X\n"
-+		"WEP default key end: %X\n"
-+		"STA table start: %X\n"
-+		"STA table end: %X\n"
-+		"Packet template start: %X\n"
-+		"Packet template end: %X\n"
-+		"Queue memory start: %X\n"
-+		"Queue memory end: %X\n"
-+		"Packet memory pool start: %X\n"
-+		"Packet memory pool end: %X\n"
-+		"iobase: %p\n"
-+		"iobase2: %p\n",
-+		*((u16 *)&memmap[0x02]), (int) sizeof(memmap),
-+		*((u32 *)&memmap[0x04]),
-+		*((u32 *)&memmap[0x08]),
-+		*((u32 *)&memmap[0x0C]),
-+		*((u32 *)&memmap[0x10]),
-+		*((u32 *)&memmap[0x14]),
-+		*((u32 *)&memmap[0x18]),
-+		*((u32 *)&memmap[0x1C]),
-+		*((u32 *)&memmap[0x20]),
-+		*((u32 *)&memmap[0x24]),
-+		*((u32 *)&memmap[0x28]),
-+		*((u32 *)&memmap[0x2C]),
-+		*((u32 *)&memmap[0x30]),
-+		adev->iobase,
-+		adev->iobase2);
-+
-+	/* dump Acx111 Rx Config */
-+	printk("dump rx config:\n"
-+		"data read: %d, struct size: %d\n"
-+		"rx config: %X\n"
-+		"rx filter config: %X\n",
-+		*((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig),
-+		*((u16 *)&rxconfig[0x04]),
-+		*((u16 *)&rxconfig[0x06]));
-+
-+	/* dump Acx111 fcs error */
-+	printk("dump fcserror:\n"
-+		"data read: %d, struct size: %d\n"
-+		"fcserrors: %X\n",
-+		*((u16 *)&fcserror[0x02]), (int) sizeof(fcserror),
-+		*((u32 *)&fcserror[0x04]));
-+
-+	/* dump Acx111 rate fallback */
-+	printk("dump rate fallback:\n"
-+		"data read: %d, struct size: %d\n"
-+		"ratefallback: %X\n",
-+		*((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback),
-+		*((u8 *)&ratefallback[0x04]));
-+
-+	/* protect against IRQ */
-+	acx_lock(adev, flags);
-+
-+	/* dump acx111 internal rx descriptor ring buffer */
-+	rxdesc = adev->rxdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump internal rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n"
-+			"RxStatus (dynamic) 0x%X\n"
-+			"Mod/Pre (dynamic) 0x%X\n",
-+			i,
-+			rxdesc,
-+			acx2cpu(rxdesc->pNextDesc),
-+			acx2cpu(rxdesc->ACXMemPtr),
-+			rxdesc->Ctl_8,
-+			rxdesc->rate,
-+			rxdesc->error,
-+			rxdesc->SNR);
-+		rxdesc++;
-+	}
-+
-+	/* dump host rx descriptor ring buffer */
-+
-+	rxhostdesc = adev->rxhostdesc_start;
-+
-+	/* loop over complete receive pool */
-+	if (rxhostdesc) for (i = 0; i < RX_CNT; i++) {
-+		printk("\ndump host rxdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			rxhostdesc,
-+			acx2cpu(rxhostdesc->data_phy),
-+			rxhostdesc->data_offset,
-+			le16_to_cpu(rxhostdesc->Ctl_16),
-+			le16_to_cpu(rxhostdesc->length),
-+			acx2cpu(rxhostdesc->desc_phy_next),
-+			rxhostdesc->Status);
-+		rxhostdesc++;
-+	}
-+
-+	/* dump acx111 internal tx descriptor ring buffer */
-+	txdesc = adev->txdesc_start;
-+
-+	/* loop over complete transmit pool */
-+	if (txdesc) for (i = 0; i < TX_CNT; i++) {
-+		printk("\ndump internal txdesc %d:\n"
-+			"size 0x%X\n"
-+			"mem pos %p\n"
-+			"next 0x%X\n"
-+			"acx mem pointer (dynamic) 0x%X\n"
-+			"host mem pointer (dynamic) 0x%X\n"
-+			"length (dynamic) 0x%X\n"
-+			"CTL (dynamic) 0x%X\n"
-+			"CTL2 (dynamic) 0x%X\n"
-+			"Status (dynamic) 0x%X\n"
-+			"Rate (dynamic) 0x%X\n",
-+			i,
-+			(int) sizeof(struct txdesc),
-+			txdesc,
-+			acx2cpu(txdesc->pNextDesc),
-+			acx2cpu(txdesc->AcxMemPtr),
-+			acx2cpu(txdesc->HostMemPtr),
-+			le16_to_cpu(txdesc->total_length),
-+			txdesc->Ctl_8,
-+			txdesc->Ctl2_8, txdesc->error,
-+			txdesc->u.r1.rate);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+
-+	/* dump host tx descriptor ring buffer */
-+
-+	txhostdesc = adev->txhostdesc_start;
-+
-+	/* loop over complete host send pool */
-+	if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) {
-+		printk("\ndump host txdesc %d:\n"
-+			"mem pos %p\n"
-+			"buffer mem pos 0x%X\n"
-+			"buffer mem offset 0x%X\n"
-+			"CTL 0x%X\n"
-+			"Length 0x%X\n"
-+			"next 0x%X\n"
-+			"Status 0x%X\n",
-+			i,
-+			txhostdesc,
-+			acx2cpu(txhostdesc->data_phy),
-+			txhostdesc->data_offset,
-+			le16_to_cpu(txhostdesc->Ctl_16),
-+			le16_to_cpu(txhostdesc->length),
-+			acx2cpu(txhostdesc->desc_phy_next),
-+			le32_to_cpu(txhostdesc->Status));
-+		txhostdesc++;
-+	}
-+
-+	/* write_reg16(adev, 0xb4, 0x4); */
-+
-+	acx_unlock(adev, flags);
-+end_ok:
-+
-+	acx_sem_unlock(adev);
-+#endif /* ACX_DEBUG */
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100pci_ioctl_set_phy_amp_bias(
-+	struct net_device *ndev,
-+	struct iw_request_info *info,
-+	struct iw_param *vwrq,
-+	char *extra)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	u16 gpio_old;
-+
-+	if (!IS_ACX100(adev)) {
-+		/* WARNING!!!
-+		 * Removing this check *might* damage
-+		 * hardware, since we're tweaking GPIOs here after all!!!
-+		 * You've been warned...
-+		 * WARNING!!! */
-+		printk("acx: sorry, setting bias level for non-acx100 "
-+			"is not supported yet\n");
-+		return OK;
-+	}
-+
-+	if (*extra > 7)	{
-+		printk("acx: invalid bias parameter, range is 0-7\n");
-+		return -EINVAL;
-+	}
-+
-+	acx_sem_lock(adev);
-+
-+	/* Need to lock accesses to [IO_ACX_GPIO_OUT]:
-+	 * IRQ handler uses it to update LED */
-+	acx_lock(adev, flags);
-+	gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT);
-+	write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8));
-+	acx_unlock(adev, flags);
-+
-+	log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old);
-+	printk("%s: PHY power amplifier bias: old:%d, new:%d\n",
-+		ndev->name,
-+		(gpio_old & 0x0700) >> 8, (unsigned char)*extra);
-+
-+	acx_sem_unlock(adev);
-+
-+	return OK;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_l_alloc_tx
-+** Actually returns a txdesc_t* ptr
-+**
-+** FIXME: in case of fragments, should allocate multiple descrs
-+** after figuring out how many we need and whether we still have
-+** sufficiently many.
-+*/
-+tx_t*
-+acxpci_l_alloc_tx(acx_device_t *adev)
-+{
-+	struct txdesc *txdesc;
-+	unsigned head;
-+	u8 ctl8;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(!adev->tx_free)) {
-+		printk("acx: BUG: no free txdesc left\n");
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	head = adev->tx_head;
-+	txdesc = get_txdesc(adev, head);
-+	ctl8 = txdesc->Ctl_8;
-+
-+	/* 2005-10-11: there were several bug reports on this happening
-+	** but now cause seems to be understood & fixed */
-+	if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_ACXDONE_HOSTOWN))) {
-+		/* whoops, descr at current index is not free, so probably
-+		 * ring buffer already full */
-+		printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find "
-+			"free txdesc\n", head, ctl8);
-+		txdesc = NULL;
-+		goto end;
-+	}
-+
-+	/* Needed in case txdesc won't be eventually submitted for tx */
-+	txdesc->Ctl_8 = DESC_CTL_ACXDONE_HOSTOWN;
-+
-+	adev->tx_free--;
-+	log(L_BUFT, "tx: got desc %u, %u remain\n",
-+			head, adev->tx_free);
-+	/* Keep a few free descs between head and tail of tx ring.
-+	** It is not absolutely needed, just feels safer */
-+	if (adev->tx_free < TX_STOP_QUEUE) {
-+		log(L_BUF, "stop queue (%u tx desc left)\n",
-+				adev->tx_free);
-+		acx_stop_queue(adev->ndev, NULL);
-+	}
-+
-+	/* returning current descriptor, so advance to next free one */
-+	adev->tx_head = (head + 1) % TX_CNT;
-+end:
-+	FN_EXIT0;
-+
-+	return (tx_t*)txdesc;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void*
-+acxpci_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque)
-+{
-+	return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_l_tx_data
-+**
-+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx).
-+** Can be called from acx_i_start_xmit (data frames from net core).
-+**
-+** FIXME: in case of fragments, should loop over the number of
-+** pre-allocated tx descrs, properly setting up transfer data and
-+** CTL_xxx flags according to fragment number.
-+*/
-+void
-+acxpci_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len)
-+{
-+	txdesc_t *txdesc = (txdesc_t*)tx_opaque;
-+	txhostdesc_t *hostdesc1, *hostdesc2;
-+	client_t *clt;
-+	u16 rate_cur;
-+	u8 Ctl_8, Ctl2_8;
-+
-+	FN_ENTER;
-+
-+	/* fw doesn't tx such packets anyhow */
-+	if (unlikely(len < WLAN_HDR_A3_LEN))
-+		goto end;
-+
-+	hostdesc1 = get_txhostdesc(adev, txdesc);
-+	/* modify flag status in separate variable to be able to write it back
-+	 * in one big swoop later (also in order to have less device memory
-+	 * accesses) */
-+	Ctl_8 = txdesc->Ctl_8;
-+	Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */
-+
-+	hostdesc2 = hostdesc1 + 1;
-+
-+	/* DON'T simply set Ctl field to 0 here globally,
-+	 * it needs to maintain a consistent flag status (those are state flags!!),
-+	 * otherwise it may lead to severe disruption. Only set or reset particular
-+	 * flags at the exact moment this is needed... */
-+
-+	/* let chip do RTS/CTS handshaking before sending
-+	 * in case packet size exceeds threshold */
-+	if (len > adev->rts_threshold)
-+		SET_BIT(Ctl2_8, DESC_CTL2_RTS);
-+	else
-+		CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_3_AP:
-+		clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1);
-+		break;
-+	case ACX_MODE_2_STA:
-+		clt = adev->ap_client;
-+		break;
-+#if 0
-+/* testing was done on acx111: */
-+	case ACX_MODE_MONITOR:
-+		SET_BIT(Ctl2_8, 0
-+/* sends CTS to self before packet */
-+			+ DESC_CTL2_SEQ		/* don't increase sequence field */
-+/* not working (looks like good fcs is still added) */
-+			+ DESC_CTL2_FCS		/* don't add the FCS */
-+/* not tested */
-+			+ DESC_CTL2_MORE_FRAG
-+/* not tested */
-+			+ DESC_CTL2_RETRY	/* don't increase retry field */
-+/* not tested */
-+			+ DESC_CTL2_POWER	/* don't increase power mgmt. field */
-+/* no effect */
-+			+ DESC_CTL2_WEP		/* encrypt this frame */
-+/* not tested */
-+			+ DESC_CTL2_DUR		/* don't increase duration field */
-+			);
-+		/* fallthrough */
-+#endif
-+	default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */
-+		clt = NULL;
-+		break;
-+	}
-+
-+	rate_cur = clt ? clt->rate_cur : adev->rate_bcast;
-+	if (unlikely(!rate_cur)) {
-+		printk("acx: driver bug! bad ratemask\n");
-+		goto end;
-+	}
-+
-+	/* used in tx cleanup routine for auto rate and accounting: */
-+	put_txcr(adev, txdesc, clt, rate_cur);
-+
-+	txdesc->total_length = cpu_to_le16(len);
-+	hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN);
-+	if (IS_ACX111(adev)) {
-+		/* note that if !txdesc->do_auto, txrate->cur
-+		** has only one nonzero bit */
-+		txdesc->u.r2.rate111 = cpu_to_le16(
-+			rate_cur
-+			/* WARNING: I was never able to make it work with prism54 AP.
-+			** It was falling down to 1Mbit where shortpre is not applicable,
-+			** and not working at all at "5,11 basic rates only" setting.
-+			** I even didn't see tx packets in radio packet capture.
-+			** Disabled for now --vda */
-+			/*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */
-+			);
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+			/* should add this to rate111 above as necessary */
-+			| (clt->pbcc511 ? RATE111_PBCC511 : 0)
-+#endif
-+		hostdesc1->length = cpu_to_le16(len);
-+	} else { /* ACX100 */
-+		u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100;
-+		txdesc->u.r1.rate = rate_100;
-+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS
-+		if (clt->pbcc511) {
-+			if (n == RATE100_5 || n == RATE100_11)
-+				n |= RATE100_PBCC511;
-+		}
-+
-+		if (clt->shortpre && (clt->cur != RATE111_1))
-+			SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */
-+#endif
-+		/* set autodma and reclaim and 1st mpdu */
-+		SET_BIT(Ctl_8, DESC_CTL_AUTODMA | DESC_CTL_RECLAIM | DESC_CTL_FIRSTFRAG);
-+#if ACX_FRAGMENTATION
-+		/* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */
-+#endif
-+		hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN);
-+	}
-+	/* don't need to clean ack/rts statistics here, already
-+	 * done on descr cleanup */
-+
-+	/* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors
-+	 * are now owned by the acx100; do this as LAST operation */
-+	CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN);
-+	/* flush writes before we release hostdesc to the adapter here */
-+	wmb();
-+	CLEAR_BIT(hostdesc1->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN));
-+	CLEAR_BIT(hostdesc2->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN));
-+
-+	/* write back modified flags */
-+	txdesc->Ctl2_8 = Ctl2_8;
-+	txdesc->Ctl_8 = Ctl_8;
-+	/* unused: txdesc->tx_time = cpu_to_le32(jiffies); */
-+
-+	/* flush writes before we tell the adapter that it's its turn now */
-+	mmiowb();
-+	write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC);
-+	write_flush(adev);
-+
-+	/* log the packet content AFTER sending it,
-+	 * in order to not delay sending any further than absolutely needed
-+	 * Do separate logs for acx100/111 to have human-readable rates */
-+	if (unlikely(acx_debug & (L_XFER|L_DATA))) {
-+		u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc;
-+		if (IS_ACX111(adev))
-+			printk("tx: pkt (%s): len %d "
-+				"rate %04X%s status %u\n",
-+				acx_get_packet_type_string(le16_to_cpu(fc)), len,
-+				le16_to_cpu(txdesc->u.r2.rate111),
-+				(le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "",
-+				adev->status);
-+		else
-+			printk("tx: pkt (%s): len %d rate %03u%s status %u\n",
-+				acx_get_packet_type_string(fc), len,
-+				txdesc->u.r1.rate,
-+				(Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "",
-+				adev->status);
-+
-+		if (acx_debug & L_DATA) {
-+			printk("tx: 802.11 [%d]: ", len);
-+			acx_dump_bytes(hostdesc1->data, len);
-+		}
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_l_clean_txdesc
-+**
-+** This function resets the txdescs' status when the ACX100
-+** signals the TX done IRQ (txdescs have been processed), starting with
-+** the pool index of the descriptor which we would use next,
-+** in order to make sure that we can be as fast as possible
-+** in filling new txdescs.
-+** Everytime we get called we know where the next packet to be cleaned is.
-+*/
-+
-+#if !ACX_DEBUG
-+static inline void log_txbuffer(const acx_device_t *adev) {}
-+#else
-+static void
-+log_txbuffer(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+
-+	/* no FN_ENTER here, we don't want that */
-+	/* no locks here, since it's entirely non-critical code */
-+	txdesc = adev->txdesc_start;
-+	if (unlikely(!txdesc)) return;
-+	printk("tx: desc->Ctl8's:");
-+	for (i = 0; i < TX_CNT; i++) {
-+		printk(" %02X", txdesc->Ctl_8);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+	printk("\n");
-+}
-+#endif
-+
-+
-+static void
-+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger)
-+{
-+	const char *err = "unknown error";
-+
-+	/* hmm, should we handle this as a mask
-+	 * of *several* bits?
-+	 * For now I think only caring about
-+	 * individual bits is ok... */
-+	switch (error) {
-+	case 0x01:
-+		err = "no Tx due to error in other fragment";
-+		adev->wstats.discard.fragment++;
-+		break;
-+	case 0x02:
-+		err = "Tx aborted";
-+		adev->stats.tx_aborted_errors++;
-+		break;
-+	case 0x04:
-+		err = "Tx desc wrong parameters";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x08:
-+		err = "WEP key not found";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x10:
-+		err = "MSDU lifetime timeout? - try changing "
-+				"'iwconfig retry lifetime XXX'";
-+		adev->wstats.discard.misc++;
-+		break;
-+	case 0x20:
-+		err = "excessive Tx retries due to either distance "
-+			"too high or unable to Tx or Tx frame error - "
-+			"try changing 'iwconfig txpower XXX' or "
-+			"'sens'itivity or 'retry'";
-+		adev->wstats.discard.retries++;
-+		/* Tx error 0x20 also seems to occur on
-+		 * overheating, so I'm not sure whether we
-+		 * actually want to do aggressive radio recalibration,
-+		 * since people maybe won't notice then that their hardware
-+		 * is slowly getting cooked...
-+		 * Or is it still a safe long distance from utter
-+		 * radio non-functionality despite many radio recalibs
-+		 * to final destructive overheating of the hardware?
-+		 * In this case we really should do recalib here...
-+		 * I guess the only way to find out is to do a
-+		 * potentially fatal self-experiment :-\
-+		 * Or maybe only recalib in case we're using Tx
-+		 * rate auto (on errors switching to lower speed
-+		 * --> less heat?) or 802.11 power save mode?
-+		 *
-+		 * ok, just do it. */
-+		if (++adev->retry_errors_msg_ratelimit % 4 == 0) {
-+			if (adev->retry_errors_msg_ratelimit <= 20) {
-+				printk("%s: several excessive Tx "
-+					"retry errors occurred, attempting "
-+					"to recalibrate radio. Radio "
-+					"drift might be caused by increasing "
-+					"card temperature, please check the card "
-+					"before it's too late!\n",
-+					adev->ndev->name);
-+				if (adev->retry_errors_msg_ratelimit == 20)
-+					printk("disabling above message\n");
-+			}
-+
-+			acx_schedule_task(adev,	ACX_AFTER_IRQ_CMD_RADIO_RECALIB);
-+		}
-+		break;
-+	case 0x40:
-+		err = "Tx buffer overflow";
-+		adev->stats.tx_fifo_errors++;
-+		break;
-+	case 0x80:
-+		/* possibly ACPI C-state powersaving related!!!
-+		 * (DMA timeout due to excessively high wakeup
-+		 * latency after C-state activation!?)
-+		 * Disable C-State powersaving and try again,
-+		 * then PLEASE REPORT, I'm VERY interested in
-+		 * whether my theory is correct that this is
-+		 * actually the problem here.
-+		 * In that case, use new Linux idle wakeup latency
-+		 * requirements kernel API to prevent this issue. */
-+		err = "DMA error";
-+		adev->wstats.discard.misc++;
-+		break;
-+	}
-+	adev->stats.tx_errors++;
-+	if (adev->stats.tx_errors <= 20)
-+		printk("%s: tx error 0x%02X, buf %02u! (%s)\n",
-+				adev->ndev->name, error, finger, err);
-+	else
-+		printk("%s: tx error 0x%02X, buf %02u!\n",
-+				adev->ndev->name, error, finger);
-+}
-+
-+
-+unsigned int
-+acxpci_l_clean_txdesc(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	unsigned finger;
-+	int num_cleaned;
-+	u16 r111;
-+	u8 error, ack_failures, rts_failures, rts_ok, r100;
-+
-+	FN_ENTER;
-+
-+	if (unlikely(acx_debug & L_DEBUG))
-+		log_txbuffer(adev);
-+
-+	log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail);
-+
-+	/* We know first descr which is not free yet. We advance it as far
-+	** as we see correct bits set in following descs (if next desc
-+	** is NOT free, we shouldn't advance at all). We know that in
-+	** front of tx_tail may be "holes" with isolated free descs.
-+	** We will catch up when all intermediate descs will be freed also */
-+
-+	finger = adev->tx_tail;
-+	num_cleaned = 0;
-+	while (likely(finger != adev->tx_head)) {
-+		txdesc = get_txdesc(adev, finger);
-+
-+		/* If we allocated txdesc on tx path but then decided
-+		** to NOT use it, then it will be left as a free "bubble"
-+		** in the "allocated for tx" part of the ring.
-+		** We may meet it on the next ring pass here. */
-+
-+		/* stop if not marked as "tx finished" and "host owned" */
-+		if ((txdesc->Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN)
-+					!= DESC_CTL_ACXDONE_HOSTOWN) {
-+			if (unlikely(!num_cleaned)) { /* maybe remove completely */
-+				log(L_BUFT, "clean_txdesc: tail isn't free. "
-+					"tail:%d head:%d\n",
-+					adev->tx_tail, adev->tx_head);
-+			}
-+			break;
-+		}
-+
-+		/* remember desc values... */
-+		error = txdesc->error;
-+		ack_failures = txdesc->ack_failures;
-+		rts_failures = txdesc->rts_failures;
-+		rts_ok = txdesc->rts_ok;
-+		r100 = txdesc->u.r1.rate;
-+		r111 = le16_to_cpu(txdesc->u.r2.rate111);
-+
-+		/* need to check for certain error conditions before we
-+		 * clean the descriptor: we still need valid descr data here */
-+		if (unlikely(0x30 & error)) {
-+			/* only send IWEVTXDROP in case of retry or lifetime exceeded;
-+			 * all other errors mean we screwed up locally */
-+			union iwreq_data wrqu;
-+			wlan_hdr_t *hdr;
-+			txhostdesc_t *hostdesc;
-+
-+			hostdesc = get_txhostdesc(adev, txdesc);
-+			hdr = (wlan_hdr_t *)hostdesc->data;
-+			MAC_COPY(wrqu.addr.sa_data, hdr->a1);
-+			wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL);
-+		}
-+
-+		/* ...and free the desc */
-+		txdesc->error = 0;
-+		txdesc->ack_failures = 0;
-+		txdesc->rts_failures = 0;
-+		txdesc->rts_ok = 0;
-+		/* signal host owning it LAST, since ACX already knows that this
-+		** descriptor is finished since it set Ctl_8 accordingly. */
-+		txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+
-+		adev->tx_free++;
-+		num_cleaned++;
-+
-+		if ((adev->tx_free >= TX_START_QUEUE)
-+		 && (adev->status == ACX_STATUS_4_ASSOCIATED)
-+		 && (acx_queue_stopped(adev->ndev))
-+		) {
-+			log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n",
-+					adev->tx_free);
-+			acx_wake_queue(adev->ndev, NULL);
-+		}
-+
-+		/* do error checking, rate handling and logging
-+		 * AFTER having done the work, it's faster */
-+
-+		/* do rate handling */
-+		if (adev->rate_auto) {
-+			struct client *clt = get_txc(adev, txdesc);
-+			if (clt) {
-+				u16 cur = get_txr(adev, txdesc);
-+				if (clt->rate_cur == cur) {
-+					acx_l_handle_txrate_auto(adev, clt,
-+						cur, /* intended rate */
-+						r100, r111, /* actually used rate */
-+						(error & 0x30), /* was there an error? */
-+						TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free);
-+				}
-+			}
-+		}
-+
-+		if (unlikely(error))
-+			handle_tx_error(adev, error, finger);
-+
-+		if (IS_ACX111(adev))
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n",
-+				finger, ack_failures, rts_failures, rts_ok, r111);
-+		else
-+			log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n",
-+				finger, ack_failures, rts_failures, rts_ok, r100);
-+
-+		/* update pointer for descr to be cleaned next */
-+		finger = (finger + 1) % TX_CNT;
-+	}
-+
-+	/* remember last position */
-+	adev->tx_tail = finger;
-+/* end: */
-+	FN_EXIT1(num_cleaned);
-+	return num_cleaned;
-+}
-+
-+/* clean *all* Tx descriptors, and regardless of their previous state.
-+ * Used for brute-force reset handling. */
-+void
-+acxpci_l_clean_txdesc_emergency(acx_device_t *adev)
-+{
-+	txdesc_t *txdesc;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < TX_CNT; i++) {
-+		txdesc = get_txdesc(adev, i);
-+
-+		/* free it */
-+		txdesc->ack_failures = 0;
-+		txdesc->rts_failures = 0;
-+		txdesc->rts_ok = 0;
-+		txdesc->error = 0;
-+		txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+	}
-+
-+	adev->tx_free = TX_CNT;
-+
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_s_create_tx_host_desc_queue
-+*/
-+
-+static void*
-+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg)
-+{
-+	void *ptr;
-+
-+	ptr = dma_alloc_coherent(adev->pdev ? &adev->pdev->dev : NULL,
-+			size, phy, GFP_KERNEL);
-+
-+	if (ptr) {
-+		log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n",
-+				msg, (int)size, ptr, (unsigned long long)*phy);
-+		memset(ptr, 0, size);
-+		return ptr;
-+	}
-+	printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n",
-+					msg, (int)size);
-+	return NULL;
-+}
-+
-+
-+static int
-+acxpci_s_create_tx_host_desc_queue(acx_device_t *adev)
-+{
-+	txhostdesc_t *hostdesc;
-+	u8 *txbuf;
-+	dma_addr_t hostdesc_phy;
-+	dma_addr_t txbuf_phy;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate TX buffer */
-+	adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS;
-+	adev->txbuf_start = allocate(adev, adev->txbuf_area_size,
-+			&adev->txbuf_startphy, "txbuf_start");
-+	if (!adev->txbuf_start)
-+		goto fail;
-+
-+	/* allocate the TX host descriptor queue pool */
-+	adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc);
-+	adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size,
-+			&adev->txhostdesc_startphy, "txhostdesc_start");
-+	if (!adev->txhostdesc_start)
-+		goto fail;
-+	/* check for proper alignment of TX host descriptor pool */
-+	if ((long) adev->txhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	hostdesc = adev->txhostdesc_start;
-+	hostdesc_phy = adev->txhostdesc_startphy;
-+	txbuf = adev->txbuf_start;
-+	txbuf_phy = adev->txbuf_startphy;
-+
-+#if 0
-+/* Each tx buffer is accessed by hardware via
-+** txdesc -> txhostdesc(s) -> txbuffer(s).
-+** We use only one txhostdesc per txdesc, but it looks like
-+** acx111 is buggy: it accesses second txhostdesc
-+** (via hostdesc.desc_phy_next field) even if
-+** txdesc->length == hostdesc->length and thus
-+** entire packet was placed into first txhostdesc.
-+** Due to this bug acx111 hangs unless second txhostdesc
-+** has le16_to_cpu(hostdesc.length) = 3 (or larger)
-+** Storing NULL into hostdesc.desc_phy_next
-+** doesn't seem to help.
-+**
-+** Update: although it worked on Xterasys XN-2522g
-+** with len=3 trick, WG311v2 is even more bogus, doesn't work.
-+** Keeping this code (#ifdef'ed out) for documentational purposes.
-+*/
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		hostdesc_phy += sizeof(*hostdesc);
-+		if (!(i & 1)) {
-+			hostdesc->data_phy = cpu2acx(txbuf_phy);
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN);
-+			/* hostdesc->length = ... */
-+			hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+			hostdesc->pNext = ptr2acx(NULL);
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			hostdesc->data = txbuf;
-+
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS;
-+			txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS;
-+		} else {
-+			/* hostdesc->data_phy = ... */
-+			/* hostdesc->data_offset = ... */
-+			/* hostdesc->reserved = ... */
-+			/* hostdesc->Ctl_16 = ... */
-+			hostdesc->length = cpu_to_le16(3); /* bug workaround */
-+			/* hostdesc->desc_phy_next = ... */
-+			/* hostdesc->pNext = ... */
-+			/* hostdesc->Status = ... */
-+			/* below: non-hardware fields */
-+			/* hostdesc->data = ... */
-+		}
-+		hostdesc++;
-+	}
-+#endif
-+/* We initialize two hostdescs so that they point to adjacent
-+** memory areas. Thus txbuf is really just a contiguous memory area */
-+	for (i = 0; i < TX_CNT*2; i++) {
-+		hostdesc_phy += sizeof(*hostdesc);
-+
-+		hostdesc->data_phy = cpu2acx(txbuf_phy);
-+		/* done by memset(0): hostdesc->data_offset = 0; */
-+		/* hostdesc->reserved = ... */
-+		hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN);
-+		/* hostdesc->length = ... */
-+		hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+		/* done by memset(0): hostdesc->pNext = ptr2acx(NULL); */
-+		/* hostdesc->Status = ... */
-+		/* ->data is a non-hardware field: */
-+		hostdesc->data = txbuf;
-+
-+		if (!(i & 1)) {
-+			txbuf += WLAN_HDR_A3_LEN;
-+			txbuf_phy += WLAN_HDR_A3_LEN;
-+		} else {
-+			txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN;
-+			txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN;
-+		}
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+	hostdesc->desc_phy_next = cpu2acx(adev->txhostdesc_startphy);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_tx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_s_create_rx_host_desc_queue
-+*/
-+/* the whole size of a data buffer (header plus data body)
-+ * plus 32 bytes safety offset at the end */
-+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32)
-+
-+static int
-+acxpci_s_create_rx_host_desc_queue(acx_device_t *adev)
-+{
-+	rxhostdesc_t *hostdesc;
-+	rxbuffer_t *rxbuf;
-+	dma_addr_t hostdesc_phy;
-+	dma_addr_t rxbuf_phy;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* allocate the RX host descriptor queue pool */
-+	adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc);
-+	adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size,
-+			&adev->rxhostdesc_startphy, "rxhostdesc_start");
-+	if (!adev->rxhostdesc_start)
-+		goto fail;
-+	/* check for proper alignment of RX host descriptor pool */
-+	if ((long) adev->rxhostdesc_start & 3) {
-+		printk("acx: driver bug: dma alloc returns unaligned address\n");
-+		goto fail;
-+	}
-+
-+	/* allocate Rx buffer pool which will be used by the acx
-+	 * to store the whole content of the received frames in it */
-+	adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE;
-+	adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size,
-+			&adev->rxbuf_startphy, "rxbuf_start");
-+	if (!adev->rxbuf_start)
-+		goto fail;
-+
-+	rxbuf = adev->rxbuf_start;
-+	rxbuf_phy = adev->rxbuf_startphy;
-+	hostdesc = adev->rxhostdesc_start;
-+	hostdesc_phy = adev->rxhostdesc_startphy;
-+
-+	/* don't make any popular C programming pointer arithmetic mistakes
-+	 * here, otherwise I'll kill you...
-+	 * (and don't dare asking me why I'm warning you about that...) */
-+	for (i = 0; i < RX_CNT; i++) {
-+		hostdesc->data = rxbuf;
-+		hostdesc->data_phy = cpu2acx(rxbuf_phy);
-+		hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE);
-+		CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN));
-+		rxbuf++;
-+		rxbuf_phy += sizeof(*rxbuf);
-+		hostdesc_phy += sizeof(*hostdesc);
-+		hostdesc->desc_phy_next = cpu2acx(hostdesc_phy);
-+		hostdesc++;
-+	}
-+	hostdesc--;
-+	hostdesc->desc_phy_next = cpu2acx(adev->rxhostdesc_startphy);
-+	FN_EXIT1(OK);
-+	return OK;
-+fail:
-+	printk("acx: create_rx_host_desc_queue FAILED\n");
-+	/* dealloc will be done by free function on error case */
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_s_create_hostdesc_queues
-+*/
-+int
-+acxpci_s_create_hostdesc_queues(acx_device_t *adev)
-+{
-+	int result;
-+	result = acxpci_s_create_tx_host_desc_queue(adev);
-+	if (OK != result) return result;
-+	result = acxpci_s_create_rx_host_desc_queue(adev);
-+	return result;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_create_tx_desc_queue
-+*/
-+static void
-+acxpci_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start)
-+{
-+	txdesc_t *txdesc;
-+	txhostdesc_t *hostdesc;
-+	dma_addr_t hostmemptr;
-+	u32 mem_offs;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	if (IS_ACX100(adev))
-+		adev->txdesc_size = sizeof(*txdesc);
-+	else
-+		/* the acx111 txdesc is 4 bytes larger */
-+		adev->txdesc_size = sizeof(*txdesc) + 4;
-+
-+	adev->txdesc_start = (txdesc_t *) (adev->iobase2 + tx_queue_start);
-+
-+	log(L_DEBUG, "adev->iobase2=%p\n"
-+			"tx_queue_start=%08X\n"
-+			"adev->txdesc_start=%p\n",
-+			adev->iobase2,
-+			tx_queue_start,
-+			adev->txdesc_start);
-+
-+	adev->tx_free = TX_CNT;
-+	/* done by memset: adev->tx_head = 0; */
-+	/* done by memset: adev->tx_tail = 0; */
-+	txdesc = adev->txdesc_start;
-+	mem_offs = tx_queue_start;
-+	hostmemptr = adev->txhostdesc_startphy;
-+	hostdesc = adev->txhostdesc_start;
-+
-+	if (IS_ACX111(adev)) {
-+		/* ACX111 has a preinitialized Tx buffer! */
-+		/* loop over whole send pool */
-+		/* FIXME: do we have to do the hostmemptr stuff here?? */
-+		for (i = 0; i < TX_CNT; i++) {
-+			txdesc->HostMemPtr = ptr2acx(hostmemptr);
-+			txdesc->Ctl_8 = DESC_CTL_HOSTOWN;
-+			/* reserve two (hdr desc and payload desc) */
-+			hostdesc += 2;
-+			hostmemptr += 2 * sizeof(*hostdesc);
-+			txdesc = advance_txdesc(adev, txdesc, 1);
-+		}
-+	} else {
-+		/* ACX100 Tx buffer needs to be initialized by us */
-+		/* clear whole send pool. sizeof is safe here (we are acx100) */
-+		memset(adev->txdesc_start, 0, TX_CNT * sizeof(*txdesc));
-+
-+		/* loop over whole send pool */
-+		for (i = 0; i < TX_CNT; i++) {
-+			log(L_DEBUG, "configure card tx descriptor: 0x%p, "
-+				"size: 0x%X\n", txdesc, adev->txdesc_size);
-+
-+			/* pointer to hostdesc memory */
-+			txdesc->HostMemPtr = ptr2acx(hostmemptr);
-+			/* initialise ctl */
-+			txdesc->Ctl_8 = ( DESC_CTL_HOSTOWN | DESC_CTL_RECLAIM
-+					| DESC_CTL_AUTODMA | DESC_CTL_FIRSTFRAG);
-+			/* done by memset(0): txdesc->Ctl2_8 = 0; */
-+			/* point to next txdesc */
-+			txdesc->pNextDesc = cpu2acx(mem_offs + adev->txdesc_size);
-+			/* reserve two (hdr desc and payload desc) */
-+			hostdesc += 2;
-+			hostmemptr += 2 * sizeof(*hostdesc);
-+			/* go to the next one */
-+			mem_offs += adev->txdesc_size;
-+			/* ++ is safe here (we are acx100) */
-+			txdesc++;
-+		}
-+		/* go back to the last one */
-+		txdesc--;
-+		/* and point to the first making it a ring buffer */
-+		txdesc->pNextDesc = cpu2acx(tx_queue_start);
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_create_rx_desc_queue
-+*/
-+static void
-+acxpci_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start)
-+{
-+	rxdesc_t *rxdesc;
-+	u32 mem_offs;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* done by memset: adev->rx_tail = 0; */
-+
-+	/* ACX111 doesn't need any further config: preconfigures itself.
-+	 * Simply print ring buffer for debugging */
-+	if (IS_ACX111(adev)) {
-+		/* rxdesc_start already set here */
-+
-+		adev->rxdesc_start = (rxdesc_t *) ((u8 *)adev->iobase2 + rx_queue_start);
-+
-+		rxdesc = adev->rxdesc_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc);
-+			rxdesc = adev->rxdesc_start = (rxdesc_t *)
-+				(adev->iobase2 + acx2cpu(rxdesc->pNextDesc));
-+		}
-+	} else {
-+		/* we didn't pre-calculate rxdesc_start in case of ACX100 */
-+		/* rxdesc_start should be right AFTER Tx pool */
-+		adev->rxdesc_start = (rxdesc_t *)
-+			((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t)));
-+		/* NB: sizeof(txdesc_t) above is valid because we know
-+		** we are in if (acx100) block. Beware of cut-n-pasting elsewhere!
-+		** acx111's txdesc is larger! */
-+
-+		memset(adev->rxdesc_start, 0, RX_CNT * sizeof(*rxdesc));
-+
-+		/* loop over whole receive pool */
-+		rxdesc = adev->rxdesc_start;
-+		mem_offs = rx_queue_start;
-+		for (i = 0; i < RX_CNT; i++) {
-+			log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc);
-+			rxdesc->Ctl_8 = DESC_CTL_RECLAIM | DESC_CTL_AUTODMA;
-+			/* point to next rxdesc */
-+			rxdesc->pNextDesc = cpu2acx(mem_offs + sizeof(*rxdesc));
-+			/* go to the next one */
-+			mem_offs += sizeof(*rxdesc);
-+			rxdesc++;
-+		}
-+		/* go to the last one */
-+		rxdesc--;
-+
-+		/* and point to the first making it a ring buffer */
-+		rxdesc->pNextDesc = cpu2acx(rx_queue_start);
-+	}
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxpci_create_desc_queues
-+*/
-+void
-+acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start)
-+{
-+	acxpci_create_tx_desc_queue(adev, tx_queue_start);
-+	acxpci_create_rx_desc_queue(adev, rx_queue_start);
-+}
-+
-+
-+/***************************************************************
-+** acxpci_s_proc_diag_output
-+*/
-+char*
-+acxpci_s_proc_diag_output(char *p, acx_device_t *adev)
-+{
-+	const char *rtl, *thd, *ttl;
-+	rxhostdesc_t *rxhostdesc;
-+	txdesc_t *txdesc;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	p += sprintf(p, "** Rx buf **\n");
-+	rxhostdesc = adev->rxhostdesc_start;
-+	if (rxhostdesc) for (i = 0; i < RX_CNT; i++) {
-+		rtl = (i == adev->rx_tail) ? " [tail]" : "";
-+		if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN))
-+		 && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)) )
-+			p += sprintf(p, "%02u FULL%s\n", i, rtl);
-+		else
-+			p += sprintf(p, "%02u empty%s\n", i, rtl);
-+		rxhostdesc++;
-+	}
-+	p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free,
-+				acx_queue_stopped(adev->ndev) ? "STOPPED" : "running");
-+	txdesc = adev->txdesc_start;
-+	if (txdesc) for (i = 0; i < TX_CNT; i++) {
-+		thd = (i == adev->tx_head) ? " [head]" : "";
-+		ttl = (i == adev->tx_tail) ? " [tail]" : "";
-+		if (txdesc->Ctl_8 & DESC_CTL_ACXDONE)
-+			p += sprintf(p, "%02u free (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl);
-+		else
-+			p += sprintf(p, "%02u tx   (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl);
-+		txdesc = advance_txdesc(adev, txdesc, 1);
-+	}
-+	p += sprintf(p,
-+		"\n"
-+		"** PCI data **\n"
-+		"txbuf_start %p, txbuf_area_size %u, txbuf_startphy %08llx\n"
-+		"txdesc_size %u, txdesc_start %p\n"
-+		"txhostdesc_start %p, txhostdesc_area_size %u, txhostdesc_startphy %08llx\n"
-+		"rxdesc_start %p\n"
-+		"rxhostdesc_start %p, rxhostdesc_area_size %u, rxhostdesc_startphy %08llx\n"
-+		"rxbuf_start %p, rxbuf_area_size %u, rxbuf_startphy %08llx\n",
-+		adev->txbuf_start, adev->txbuf_area_size,
-+				(unsigned long long)adev->txbuf_startphy,
-+		adev->txdesc_size, adev->txdesc_start,
-+		adev->txhostdesc_start, adev->txhostdesc_area_size,
-+				(unsigned long long)adev->txhostdesc_startphy,
-+		adev->rxdesc_start,
-+		adev->rxhostdesc_start, adev->rxhostdesc_area_size,
-+				(unsigned long long)adev->rxhostdesc_startphy,
-+		adev->rxbuf_start, adev->rxbuf_area_size,
-+				(unsigned long long)adev->rxbuf_startphy);
-+
-+	FN_EXIT0;
-+	return p;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxpci_proc_eeprom_output(char *buf, acx_device_t *adev)
-+{
-+	char *p = buf;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	for (i = 0; i < 0x400; i++) {
-+		acxpci_read_eeprom_byte(adev, i, p++);
-+	}
-+
-+	FN_EXIT1(p - buf);
-+	return p - buf;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+void
-+acxpci_set_interrupt_mask(acx_device_t *adev)
-+{
-+	if (IS_ACX111(adev)) {
-+		adev->irq_mask = (u16) ~(0
-+				/* | HOST_INT_RX_DATA        */
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				| HOST_INT_RX_COMPLETE
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				| HOST_INT_IV_ICV_FAILURE
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				/* | HOST_INT_OVERFLOW       */
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				| HOST_INT_FCS_THRESHOLD
-+				/* | HOST_INT_UNKNOWN        */
-+				);
-+		/* Or else acx100 won't signal cmd completion, right? */
-+		adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */
-+	} else {
-+		adev->irq_mask = (u16) ~(0
-+				/* | HOST_INT_RX_DATA        */
-+				| HOST_INT_TX_COMPLETE
-+				/* | HOST_INT_TX_XFER        */
-+				| HOST_INT_RX_COMPLETE
-+				/* | HOST_INT_DTIM           */
-+				/* | HOST_INT_BEACON         */
-+				/* | HOST_INT_TIMER          */
-+				/* | HOST_INT_KEY_NOT_FOUND  */
-+				/* | HOST_INT_IV_ICV_FAILURE */
-+				| HOST_INT_CMD_COMPLETE
-+				| HOST_INT_INFO
-+				/* | HOST_INT_OVERFLOW       */
-+				/* | HOST_INT_PROCESS_ERROR  */
-+				| HOST_INT_SCAN_COMPLETE
-+				/* | HOST_INT_FCS_THRESHOLD  */
-+				/* | HOST_INT_UNKNOWN        */
-+				);
-+		adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */
-+	}
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm)
-+{
-+	/* since it can be assumed that at least the Maxim radio has a
-+	 * maximum power output of 20dBm and since it also can be
-+	 * assumed that these values drive the DAC responsible for
-+	 * setting the linear Tx level, I'd guess that these values
-+	 * should be the corresponding linear values for a dBm value,
-+	 * in other words: calculate the values from that formula:
-+	 * Y [dBm] = 10 * log (X [mW])
-+	 * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm)
-+	 * and you're done...
-+	 * Hopefully that's ok, but you never know if we're actually
-+	 * right... (especially since Windows XP doesn't seem to show
-+	 * actual Tx dBm values :-P) */
-+
-+	/* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the
-+	 * values are EXACTLY mW!!! Not sure about RFMD and others,
-+	 * though... */
-+	static const u8 dbm2val_maxim[21] = {
-+		63, 63, 63, 62,
-+		61, 61, 60, 60,
-+		59, 58, 57, 55,
-+		53, 50, 47, 43,
-+		38, 31, 23, 13,
-+		0
-+	};
-+	static const u8 dbm2val_rfmd[21] = {
-+		 0,  0,  0,  1,
-+		 2,  2,  3,  3,
-+		 4,  5,  6,  8,
-+		10, 13, 16, 20,
-+		25, 32, 41, 50,
-+		63
-+	};
-+	const u8 *table;
-+
-+	switch (adev->radio_type) {
-+	case RADIO_MAXIM_0D:
-+		table = &dbm2val_maxim[0];
-+		break;
-+	case RADIO_RFMD_11:
-+	case RADIO_RALINK_15:
-+		table = &dbm2val_rfmd[0];
-+		break;
-+	default:
-+		printk("%s: unknown/unsupported radio type, "
-+			"cannot modify tx power level yet!\n",
-+				adev->ndev->name);
-+		return NOT_OK;
-+	}
-+	printk("%s: changing radio power level to %u dBm (%u)\n",
-+			adev->ndev->name, level_dbm, table[level_dbm]);
-+	acxpci_s_write_phy_reg(adev, 0x11, table[level_dbm]);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** Data for init_module/cleanup_module
-+*/
-+static const struct pci_device_id
-+acxpci_id_tbl[] __devinitdata = {
-+	{
-+		.vendor = PCI_VENDOR_ID_TI,
-+		.device = PCI_DEVICE_ID_TI_TNETW1100A,
-+		.subvendor = PCI_ANY_ID,
-+		.subdevice = PCI_ANY_ID,
-+		.driver_data = CHIPTYPE_ACX100,
-+	},
-+	{
-+		.vendor = PCI_VENDOR_ID_TI,
-+		.device = PCI_DEVICE_ID_TI_TNETW1100B,
-+		.subvendor = PCI_ANY_ID,
-+		.subdevice = PCI_ANY_ID,
-+		.driver_data = CHIPTYPE_ACX100,
-+	},
-+	{
-+		.vendor = PCI_VENDOR_ID_TI,
-+		.device = PCI_DEVICE_ID_TI_TNETW1130,
-+		.subvendor = PCI_ANY_ID,
-+		.subdevice = PCI_ANY_ID,
-+		.driver_data = CHIPTYPE_ACX111,
-+	},
-+	{
-+		.vendor = 0,
-+		.device = 0,
-+		.subvendor = 0,
-+		.subdevice = 0,
-+		.driver_data = 0,
-+	}
-+};
-+
-+MODULE_DEVICE_TABLE(pci, acxpci_id_tbl);
-+
-+/* FIXME: checks should be removed once driver is included in the kernel */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11)
-+/* pci_name() got introduced at start of 2.6.x,
-+ * got mandatory (slot_name member removed) in 2.6.11-bk1 */
-+#define pci_name(x) x->slot_name
-+#endif
-+
-+static struct pci_driver
-+acxpci_drv_id = {
-+	.name        = "acx_pci",
-+	.id_table    = acxpci_id_tbl,
-+	.probe       = acxpci_e_probe,
-+	.remove      = __devexit_p(acxpci_e_remove),
-+#ifdef CONFIG_PM
-+	.suspend     = acxpci_e_suspend,
-+	.resume      = acxpci_e_resume
-+#endif /* CONFIG_PM */
-+};
-+
-+
-+/***********************************************************************
-+** acxpci_e_init_module
-+**
-+** Module initialization routine, called once at module load time
-+*/
-+int __init
-+acxpci_e_init_module(void)
-+{
-+	int res;
-+
-+	FN_ENTER;
-+
-+#if (ACX_IO_WIDTH==32)
-+	printk("acx: compiled to use 32bit I/O access. "
-+		"I/O timing issues might occur, such as "
-+		"non-working firmware upload. Report them\n");
-+#else
-+	printk("acx: compiled to use 16bit I/O access only "
-+		"(compatibility mode)\n");
-+#endif
-+
-+#ifdef __LITTLE_ENDIAN
-+#define ENDIANNESS_STRING "running on a little-endian CPU\n"
-+#else
-+#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n"
-+#endif
-+	log(L_INIT,
-+		ENDIANNESS_STRING
-+		"PCI module " ACX_RELEASE " initialized, "
-+		"waiting for cards to probe...\n"
-+	);
-+
-+	res = pci_register_driver(&acxpci_drv_id);
-+	FN_EXIT1(res);
-+	return res;
-+}
-+
-+
-+/***********************************************************************
-+** acxpci_e_cleanup_module
-+**
-+** Called at module unload time. This is our last chance to
-+** clean up after ourselves.
-+*/
-+void __exit
-+acxpci_e_cleanup_module(void)
-+{
-+	FN_ENTER;
-+
-+	pci_unregister_driver(&acxpci_drv_id);
-+
-+	FN_EXIT0;
-+}
-Index: linux-2.6.23/drivers/net/wireless/acx/rx3000_acx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/rx3000_acx.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,110 @@
-+/*
-+ * WLAN (TI TNETW1100B) support in the HP iPAQ RX3000
-+ *
-+ * Copyright (c) 2006 SDG Systems, LLC
-+ * Copyright (c) 2006 Roman Moravcik
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * Based on hx4700_acx.c
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dpm.h>
-+#include <linux/leds.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/regs-gpio.h>
-+#include <linux/mfd/asic3_base.h>
-+#include <asm/arch/rx3000.h>
-+#include <asm/arch/rx3000-asic3.h>
-+#include <asm/io.h>
-+
-+#include "acx_hw.h"
-+
-+extern struct platform_device s3c_device_asic3;
-+
-+static int rx3000_wlan_start(void)
-+{
-+	DPM_DEBUG("rx3000_acx: Turning on\n");
-+	asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3);
-+	mdelay(20);
-+	asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, ASIC3_GPC13);
-+	mdelay(20);
-+	asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, ASIC3_GPC11);
-+	mdelay(100);
-+	asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3);
-+	mdelay(20);
-+	s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_nGCS4);        
-+	mdelay(100);
-+	s3c2410_gpio_setpin(S3C2410_GPA11, 0);
-+	mdelay(50);
-+	s3c2410_gpio_setpin(S3C2410_GPA11, 1);
-+	led_trigger_event_shared(rx3000_radio_trig, LED_FULL);
-+	return 0;
-+}
-+
-+static int rx3000_wlan_stop(void)
-+{
-+	DPM_DEBUG("rx3000_acx: Turning off\n");
-+	s3c2410_gpio_setpin(S3C2410_GPA15, 1);
-+	s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_OUT);
-+	asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, 0);
-+	asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, 0);
-+	asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, 0);
-+	led_trigger_event_shared(rx3000_radio_trig, LED_OFF);
-+	return 0;
-+}
-+
-+static struct resource acx_resources[] = {
-+	[0] = {
-+		.start	= RX3000_PA_WLAN,
-+		.end	= RX3000_PA_WLAN + 0x20,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= IRQ_EINT16,
-+		.end	= IRQ_EINT16,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct acx_hardware_data acx_data = {
-+	.start_hw	= rx3000_wlan_start,
-+	.stop_hw	= rx3000_wlan_stop,
-+};
-+
-+static struct platform_device acx_device = {
-+	.name	= "acx-mem",
-+	.dev	= {
-+		.platform_data = &acx_data,
-+	},
-+	.num_resources	= ARRAY_SIZE(acx_resources),
-+	.resource	= acx_resources,
-+};
-+
-+static int __init rx3000_wlan_init(void)
-+{
-+	printk("rx3000_wlan_init: acx-mem platform_device_register\n");
-+	return platform_device_register(&acx_device);
-+}
-+
-+
-+static void __exit rx3000_wlan_exit(void)
-+{
-+	platform_device_unregister(&acx_device);
-+}
-+
-+module_init(rx3000_wlan_init);
-+module_exit(rx3000_wlan_exit);
-+
-+MODULE_AUTHOR("Todd Blumer <todd@sdgsystems.com>, Roman Moravcik <roman.moravcik@gmail.com>");
-+MODULE_DESCRIPTION("WLAN driver for HP iPAQ RX3000");
-+MODULE_LICENSE("GPL");
-+
-Index: linux-2.6.23/drivers/net/wireless/acx/setrate.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/setrate.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,213 @@
-+/* TODO: stop #including, move into wireless.c
-+ * until then, keep in sync copies in prism54/ and acx/ dirs
-+ * code+data size: less than 1k */
-+
-+enum {
-+	DOT11_RATE_1,
-+	DOT11_RATE_2,
-+	DOT11_RATE_5,
-+	DOT11_RATE_11,
-+	DOT11_RATE_22,
-+	DOT11_RATE_33,
-+	DOT11_RATE_6,
-+	DOT11_RATE_9,
-+	DOT11_RATE_12,
-+	DOT11_RATE_18,
-+	DOT11_RATE_24,
-+	DOT11_RATE_36,
-+	DOT11_RATE_48,
-+	DOT11_RATE_54
-+};
-+enum {
-+	DOT11_MOD_DBPSK,
-+	DOT11_MOD_DQPSK,
-+	DOT11_MOD_CCK,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_CCKOFDM,
-+	DOT11_MOD_PBCC
-+};
-+static const u8 ratelist[] = { 1,2,5,11,22,33,6,9,12,18,24,36,48,54 };
-+static const u8 dot11ratebyte[] = { 1*2,2*2,11,11*2,22*2,33*2,6*2,9*2,12*2,18*2,24*2,36*2,48*2,54*2 };
-+static const u8 default_modulation[] = {
-+	DOT11_MOD_DBPSK,
-+	DOT11_MOD_DQPSK,
-+	DOT11_MOD_CCK,
-+	DOT11_MOD_CCK,
-+	DOT11_MOD_PBCC,
-+	DOT11_MOD_PBCC,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM,
-+	DOT11_MOD_OFDM
-+};
-+
-+static /* TODO: remove 'static' when moved to wireless.c */
-+int
-+rate_mbit2enum(int n) {
-+	int i=0;
-+	while(i<sizeof(ratelist)) {
-+		if(n==ratelist[i]) return i;
-+		i++;
-+	}
-+	return -EINVAL;
-+}
-+
-+static int
-+get_modulation(int r_enum, char suffix) {
-+	if(suffix==',' || suffix==' ' || suffix=='\0') {
-+		/* could shorten default_mod by 8 bytes:
-+		if(r_enum>=DOT11_RATE_6) return DOT11_MOD_OFDM; */
-+		return default_modulation[r_enum];
-+	}
-+	if(suffix=='c') {
-+		if(r_enum<DOT11_RATE_5 || r_enum>DOT11_RATE_11) return -EINVAL;
-+		return DOT11_MOD_CCK;
-+	}
-+	if(suffix=='p') {
-+		if(r_enum<DOT11_RATE_5 || r_enum>DOT11_RATE_33) return -EINVAL;
-+		return DOT11_MOD_PBCC;
-+	}
-+	if(suffix=='o') {
-+		if(r_enum<DOT11_RATE_6) return -EINVAL;
-+		return DOT11_MOD_OFDM;
-+	}
-+	if(suffix=='d') {
-+		if(r_enum<DOT11_RATE_6) return -EINVAL;
-+		return DOT11_MOD_CCKOFDM;
-+	}
-+	return -EINVAL;
-+}
-+
-+#ifdef UNUSED
-+static int
-+fill_ratevector(const char **pstr, u8 *vector, int size,
-+		int (*supported)(int mbit, int mod, void *opaque), void *opaque, int or_mask)
-+{
-+	unsigned long rate_mbit;
-+	int rate_enum,mod;
-+	const char *str = *pstr;
-+	char c;
-+
-+	do {
-+		rate_mbit = simple_strtoul(str, (char**)&str, 10);
-+		if(rate_mbit>INT_MAX) return -EINVAL;
-+
-+		rate_enum = rate_mbit2enum(rate_mbit);
-+		if(rate_enum<0) return rate_enum;
-+
-+		c = *str;
-+		mod = get_modulation(rate_enum, c);
-+		if(mod<0) return mod;
-+
-+		if(c>='a' && c<='z') c = *++str;
-+		if(c!=',' && c!=' ' && c!='\0') return -EINVAL;
-+
-+		if(supported) {
-+			int r = supported(rate_mbit, mod, opaque);
-+			if(r) return r;
-+		}
-+
-+		*vector++ = dot11ratebyte[rate_enum] | or_mask;
-+
-+		size--;
-+		str++;
-+	} while(size>0 && c==',');
-+
-+	if(size<1) return -E2BIG;
-+	*vector=0; /* TODO: sort, remove dups? */
-+
-+	*pstr = str-1;
-+	return 0;
-+}
-+
-+static /* TODO: remove 'static' when moved to wireless.c */
-+int
-+fill_ratevectors(const char *str, u8 *brate, u8 *orate, int size,
-+		int (*supported)(int mbit, int mod, void *opaque), void *opaque)
-+{
-+	int r;
-+
-+	r = fill_ratevector(&str, brate, size, supported, opaque, 0x80);
-+	if(r) return r;
-+
-+	orate[0] = 0;
-+	if(*str==' ') {
-+		str++;
-+		r = fill_ratevector(&str, orate, size, supported, opaque, 0);
-+		if(r) return r;
-+		/* TODO: sanitize, e.g. remove/error on rates already in basic rate set? */
-+	}
-+	if(*str)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+#endif
-+
-+/* TODO: use u64 masks? */
-+
-+static int
-+fill_ratemask(const char **pstr, u32* mask,
-+		int (*supported)(int mbit, int mod,void *opaque),
-+		u32 (*gen_mask)(int mbit, int mod,void *opaque),
-+		void *opaque)
-+{
-+	unsigned long rate_mbit;
-+	int rate_enum,mod;
-+	u32 m = 0;
-+	const char *str = *pstr;
-+	char c;
-+
-+	do {
-+		rate_mbit = simple_strtoul(str, (char**)&str, 10);
-+		if(rate_mbit>INT_MAX) return -EINVAL;
-+
-+		rate_enum = rate_mbit2enum(rate_mbit);
-+		if(rate_enum<0) return rate_enum;
-+
-+		c = *str;
-+		mod = get_modulation(rate_enum, c);
-+		if(mod<0) return mod;
-+
-+		if(c>='a' && c<='z') c = *++str;
-+		if(c!=',' && c!=' ' && c!='\0') return -EINVAL;
-+
-+		if(supported) {
-+			int r = supported(rate_mbit, mod, opaque);
-+			if(r) return r;
-+		}
-+
-+		m |= gen_mask(rate_mbit, mod, opaque);
-+		str++;
-+	} while(c==',');
-+
-+	*pstr = str-1;
-+	*mask |= m;
-+	return 0;
-+}
-+
-+static /* TODO: remove 'static' when moved to wireless.c */
-+int
-+fill_ratemasks(const char *str, u32 *bmask, u32 *omask,
-+		int (*supported)(int mbit, int mod,void *opaque),
-+		u32 (*gen_mask)(int mbit, int mod,void *opaque),
-+		void *opaque)
-+{
-+	int r;
-+
-+	r = fill_ratemask(&str, bmask, supported, gen_mask, opaque);
-+	if(r) return r;
-+
-+	if(*str==' ') {
-+		str++;
-+		r = fill_ratemask(&str, omask, supported, gen_mask, opaque);
-+		if(r) return r;
-+	}
-+	if(*str)
-+		return -EINVAL;
-+	return 0;
-+}
-Index: linux-2.6.23/drivers/net/wireless/acx/usb.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/usb.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,1922 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** USB support for TI ACX100 based devices. Many parts are taken from
-+** the PCI driver.
-+**
-+** Authors:
-+**  Martin Wawro <martin.wawro AT uni-dortmund.de>
-+**  Andreas Mohr <andi AT lisas.de>
-+**
-+** LOCKING
-+** callback functions called by USB core are running in interrupt context
-+** and thus have names with _i_.
-+*/
-+#define ACX_USB 1
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/types.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/kernel.h>
-+#include <linux/usb.h>
-+#include <linux/netdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/etherdevice.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+#include <linux/vmalloc.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+/* number of endpoints of an interface */
-+#define NUM_EP(intf) (intf)->altsetting[0].desc.bNumEndpoints
-+#define EP(intf, nr) (intf)->altsetting[0].endpoint[(nr)].desc
-+#define GET_DEV(udev) usb_get_dev((udev))
-+#define PUT_DEV(udev) usb_put_dev((udev))
-+#define SET_NETDEV_OWNER(ndev, owner) /* not needed anymore ??? */
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14)
-+/* removed in 2.6.14. We will use fake value for now */
-+#define URB_ASYNC_UNLINK 0
-+#endif
-+
-+
-+/***********************************************************************
-+*/
-+/* ACX100 (TNETW1100) USB device: D-Link DWL-120+ */
-+#define ACX100_VENDOR_ID 0x2001
-+#define ACX100_PRODUCT_ID_UNBOOTED 0x3B01
-+#define ACX100_PRODUCT_ID_BOOTED 0x3B00
-+
-+/* TNETW1450 USB devices */
-+#define VENDOR_ID_DLINK		0x07b8 /* D-Link Corp. */
-+#define PRODUCT_ID_WUG2400	0xb21a /* AboCom WUG2400 or SafeCom SWLUT-54125 */
-+#define VENDOR_ID_AVM_GMBH	0x057c
-+#define PRODUCT_ID_AVM_WLAN_USB	0x5601
-+#define PRODUCT_ID_AVM_WLAN_USB_si	0x6201 /* "self install" named Version: driver kills kernel on inbound scans from fritz box ???  */
-+#define VENDOR_ID_ZCOM		0x0cde
-+#define PRODUCT_ID_ZCOM_XG750	0x0017 /* not tested yet */
-+#define VENDOR_ID_TI		0x0451
-+#define PRODUCT_ID_TI_UNKNOWN	0x60c5 /* not tested yet */
-+
-+#define ACX_USB_CTRL_TIMEOUT	5500   /* steps in ms */
-+
-+/* Buffer size for fw upload, same for both ACX100 USB and TNETW1450 */
-+#define USB_RWMEM_MAXLEN	2048
-+
-+/* The number of bulk URBs to use */
-+#define ACX_TX_URB_CNT		8
-+#define ACX_RX_URB_CNT		2
-+
-+/* Should be sent to the bulkout endpoint */
-+#define ACX_USB_REQ_UPLOAD_FW	0x10
-+#define ACX_USB_REQ_ACK_CS	0x11
-+#define ACX_USB_REQ_CMD		0x12
-+
-+/***********************************************************************
-+** Prototypes
-+*/
-+static int acxusb_e_probe(struct usb_interface *, const struct usb_device_id *);
-+static void acxusb_e_disconnect(struct usb_interface *);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+static void acxusb_i_complete_tx(struct urb *);
-+static void acxusb_i_complete_rx(struct urb *);
-+#else
-+static void acxusb_i_complete_tx(struct urb *, struct pt_regs *);
-+static void acxusb_i_complete_rx(struct urb *, struct pt_regs *);
-+#endif
-+static int acxusb_e_open(struct net_device *);
-+static int acxusb_e_close(struct net_device *);
-+static void acxusb_i_set_rx_mode(struct net_device *);
-+static int acxusb_boot(struct usb_device *, int is_tnetw1450, int *radio_type);
-+
-+static void acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx);
-+
-+static void acxusb_i_tx_timeout(struct net_device *);
-+
-+/* static void dump_device(struct usb_device *); */
-+/* static void dump_device_descriptor(struct usb_device_descriptor *); */
-+/* static void dump_config_descriptor(struct usb_config_descriptor *); */
-+
-+/***********************************************************************
-+** Module Data
-+*/
-+#define TXBUFSIZE sizeof(usb_txbuffer_t)
-+/*
-+ * Now, this is just plain lying, but the device insists in giving us
-+ * huge packets. We supply extra space after rxbuffer. Need to understand
-+ * it better...
-+ */
-+#define RXBUFSIZE (sizeof(rxbuffer_t) + \
-+		   (sizeof(usb_rx_t) - sizeof(struct usb_rx_plain)))
-+
-+static const struct usb_device_id
-+acxusb_ids[] = {
-+	{ USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_BOOTED) },
-+	{ USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_UNBOOTED) },
-+	{ USB_DEVICE(VENDOR_ID_DLINK, PRODUCT_ID_WUG2400) },
-+	{ USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB) },
-+	{ USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB_si) },
-+	{ USB_DEVICE(VENDOR_ID_ZCOM, PRODUCT_ID_ZCOM_XG750) },
-+	{ USB_DEVICE(VENDOR_ID_TI, PRODUCT_ID_TI_UNKNOWN) },
-+	{}
-+};
-+
-+MODULE_DEVICE_TABLE(usb, acxusb_ids);
-+
-+/* USB driver data structure as required by the kernel's USB core */
-+static struct usb_driver
-+acxusb_driver = {
-+	.name = "acx_usb",
-+	.probe = acxusb_e_probe,
-+	.disconnect = acxusb_e_disconnect,
-+	.id_table = acxusb_ids
-+};
-+
-+
-+/***********************************************************************
-+** USB helper
-+**
-+** ldd3 ch13 says:
-+** When the function is usb_kill_urb, the urb lifecycle is stopped. This
-+** function is usually used when the device is disconnected from the system,
-+** in the disconnect callback. For some drivers, the usb_unlink_urb function
-+** should be used to tell the USB core to stop an urb. This function does not
-+** wait for the urb to be fully stopped before returning to the caller.
-+** This is useful for stoppingthe urb while in an interrupt handler or when
-+** a spinlock is held, as waiting for a urb to fully stop requires the ability
-+** for the USB core to put the calling process to sleep. This function requires
-+** that the URB_ASYNC_UNLINK flag value be set in the urb that is being asked
-+** to be stopped in order to work properly.
-+**
-+** (URB_ASYNC_UNLINK is obsolete, usb_unlink_urb will always be
-+** asynchronous while usb_kill_urb is synchronous and should be called
-+** directly (drivers/usb/core/urb.c))
-+**
-+** In light of this, timeout is just for paranoid reasons...
-+*
-+* Actually, it's useful for debugging. If we reach timeout, we're doing
-+* something wrong with the urbs.
-+*/
-+static void
-+acxusb_unlink_urb(struct urb* urb)
-+{
-+	if (!urb)
-+		return;
-+
-+	if (urb->status == -EINPROGRESS) {
-+		int timeout = 10;
-+
-+		usb_unlink_urb(urb);
-+		while (--timeout && urb->status == -EINPROGRESS) {
-+			mdelay(1);
-+		}
-+		if (!timeout) {
-+			printk("acx_usb: urb unlink timeout!\n");
-+		}
-+	}
-+}
-+
-+
-+/***********************************************************************
-+** EEPROM and PHY read/write helpers
-+*/
-+/***********************************************************************
-+** acxusb_s_read_phy_reg
-+*/
-+int
-+acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf)
-+{
-+	/* mem_read_write_t mem; */
-+
-+	FN_ENTER;
-+
-+	printk("%s doesn't seem to work yet, disabled.\n", __func__);
-+
-+	/*
-+	mem.addr = cpu_to_le16(reg);
-+	mem.type = cpu_to_le16(0x82);
-+	mem.len = cpu_to_le32(4);
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_READ, &mem, sizeof(mem));
-+	*charbuf = mem.data;
-+	log(L_DEBUG, "read radio PHY[0x%04X]=0x%02X\n", reg, *charbuf);
-+	*/
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+int
-+acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value)
-+{
-+	mem_read_write_t mem;
-+
-+	FN_ENTER;
-+
-+	mem.addr = cpu_to_le16(reg);
-+	mem.type = cpu_to_le16(0x82);
-+	mem.len = cpu_to_le32(4);
-+	mem.data = value;
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_WRITE, &mem, sizeof(mem));
-+	log(L_DEBUG, "write radio PHY[0x%04X]=0x%02X\n", reg, value);
-+
-+	FN_EXIT1(OK);
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_s_issue_cmd_timeo
-+** Excecutes a command in the command mailbox
-+**
-+** buffer = a pointer to the data.
-+** The data must not include 4 byte command header
-+*/
-+
-+/* TODO: ideally we shall always know how much we need
-+** and this shall be 0 */
-+#define BOGUS_SAFETY_PADDING 0x40
-+
-+#undef FUNC
-+#define FUNC "issue_cmd"
-+
-+#if !ACX_DEBUG
-+int
-+acxusb_s_issue_cmd_timeo(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned timeout)
-+{
-+#else
-+int
-+acxusb_s_issue_cmd_timeo_debug(
-+	acx_device_t *adev,
-+	unsigned cmd,
-+	void *buffer,
-+	unsigned buflen,
-+	unsigned timeout,
-+	const char* cmdstr)
-+{
-+#endif
-+	/* USB ignores timeout param */
-+
-+	struct usb_device *usbdev;
-+	struct {
-+		u16	cmd;
-+		u16	status;
-+		u8	data[1];
-+	} ACX_PACKED *loc;
-+	const char *devname;
-+	int acklen, blocklen, inpipe, outpipe;
-+	int cmd_status;
-+	int result;
-+
-+	FN_ENTER;
-+
-+	devname = adev->ndev->name;
-+	/* no "wlan%%d: ..." please */
-+	if (!devname || !devname[0] || devname[4]=='%')
-+		devname = "acx";
-+
-+	log(L_CTL, FUNC"(cmd:%s,buflen:%u,type:0x%04X)\n",
-+		cmdstr, buflen,
-+		buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1);
-+
-+	loc = kmalloc(buflen + 4 + BOGUS_SAFETY_PADDING, GFP_KERNEL);
-+	if (!loc) {
-+		printk("%s: "FUNC"(): no memory for data buffer\n", devname);
-+		goto bad;
-+	}
-+
-+	/* get context from acx_device */
-+	usbdev = adev->usbdev;
-+
-+	/* check which kind of command was issued */
-+	loc->cmd = cpu_to_le16(cmd);
-+	loc->status = 0;
-+
-+/* NB: buflen == frmlen + 4
-+**
-+** Interrogate: write 8 bytes: (cmd,status,rid,frmlen), then
-+**		read (cmd,status,rid,frmlen,data[frmlen]) back
-+**
-+** Configure: write (cmd,status,rid,frmlen,data[frmlen])
-+**
-+** Possibly bogus special handling of ACX1xx_IE_SCAN_STATUS removed
-+*/
-+
-+	/* now write the parameters of the command if needed */
-+	acklen = buflen + 4 + BOGUS_SAFETY_PADDING;
-+	blocklen = buflen;
-+	if (buffer && buflen) {
-+		/* if it's an INTERROGATE command, just pass the length
-+		 * of parameters to read, as data */
-+		if (cmd == ACX1xx_CMD_INTERROGATE) {
-+			blocklen = 4;
-+			acklen = buflen + 4;
-+		}
-+		memcpy(loc->data, buffer, blocklen);
-+	}
-+	blocklen += 4; /* account for cmd,status */
-+
-+	/* obtain the I/O pipes */
-+	outpipe = usb_sndctrlpipe(usbdev, 0);
-+	inpipe = usb_rcvctrlpipe(usbdev, 0);
-+	log(L_CTL, "ctrl inpipe=0x%X outpipe=0x%X\n", inpipe, outpipe);
-+	log(L_CTL, "sending USB control msg (out) (blocklen=%d)\n", blocklen);
-+	if (acx_debug & L_DATA)
-+		acx_dump_bytes(loc, blocklen);
-+
-+	result = usb_control_msg(usbdev, outpipe,
-+		ACX_USB_REQ_CMD, /* request */
-+		USB_TYPE_VENDOR|USB_DIR_OUT, /* requesttype */
-+		0, /* value */
-+		0, /* index */
-+		loc, /* dataptr */
-+		blocklen, /* size */
-+		ACX_USB_CTRL_TIMEOUT /* timeout in ms */
-+	);
-+
-+	if (result == -ENODEV) {
-+		log(L_CTL, "no device present (unplug?)\n");
-+		goto good;
-+	}
-+
-+	log(L_CTL, "wrote %d bytes\n", result);
-+	if (result < 0) {
-+		goto bad;
-+	}
-+
-+	/* check for device acknowledge */
-+	log(L_CTL, "sending USB control msg (in) (acklen=%d)\n", acklen);
-+	loc->status = 0; /* delete old status flag -> set to IDLE */
-+	/* shall we zero out the rest? */
-+	result = usb_control_msg(usbdev, inpipe,
-+		ACX_USB_REQ_CMD, /* request */
-+		USB_TYPE_VENDOR|USB_DIR_IN, /* requesttype */
-+		0, /* value */
-+		0, /* index */
-+		loc, /* dataptr */
-+		acklen, /* size */
-+		ACX_USB_CTRL_TIMEOUT /* timeout in ms */
-+	);
-+	if (result < 0) {
-+		printk("%s: "FUNC"(): USB read error %d\n", devname, result);
-+		goto bad;
-+	}
-+	if (acx_debug & L_CTL) {
-+		printk("read %d bytes: ", result);
-+		acx_dump_bytes(loc, result);
-+	}
-+
-+/*
-+   check for result==buflen+4? Was seen:
-+
-+interrogate(type:ACX100_IE_DOT11_ED_THRESHOLD,len:4)
-+issue_cmd(cmd:ACX1xx_CMD_INTERROGATE,buflen:8,type:4111)
-+ctrl inpipe=0x80000280 outpipe=0x80000200
-+sending USB control msg (out) (blocklen=8)
-+01 00 00 00 0F 10 04 00
-+wrote 8 bytes
-+sending USB control msg (in) (acklen=12) sizeof(loc->data
-+read 4 bytes <==== MUST BE 12!!
-+*/
-+
-+	cmd_status = le16_to_cpu(loc->status);
-+	if (cmd_status != 1) {
-+		printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s)\n",
-+			devname, cmd_status, acx_cmd_status_str(cmd_status));
-+		/* TODO: goto bad; ? */
-+	}
-+	if ((cmd == ACX1xx_CMD_INTERROGATE) && buffer && buflen) {
-+		memcpy(buffer, loc->data, buflen);
-+		log(L_CTL, "response frame: cmd=0x%04X status=%d\n",
-+			le16_to_cpu(loc->cmd),
-+			cmd_status);
-+	}
-+good:
-+	kfree(loc);
-+	FN_EXIT1(OK);
-+	return OK;
-+bad:
-+	/* Give enough info so that callers can avoid
-+	** printing their own diagnostic messages */
-+#if ACX_DEBUG
-+	printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr);
-+#else
-+	printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd);
-+#endif
-+	dump_stack();
-+	kfree(loc);
-+	FN_EXIT1(NOT_OK);
-+	return NOT_OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_boot()
-+** Inputs:
-+**    usbdev -> Pointer to kernel's usb_device structure
-+**
-+** Returns:
-+**  (int) Errorcode or 0 on success
-+**
-+** This function triggers the loading of the firmware image from harddisk
-+** and then uploads the firmware to the USB device. After uploading the
-+** firmware and transmitting the checksum, the device resets and appears
-+** as a new device on the USB bus (the device we can finally deal with)
-+*/
-+static inline int
-+acxusb_fw_needs_padding(firmware_image_t *fw_image, unsigned int usb_maxlen)
-+{
-+	unsigned int num_xfers = ((fw_image->size - 1) / usb_maxlen) + 1;
-+
-+	return ((num_xfers % 2) == 0);
-+}
-+
-+static int
-+acxusb_boot(struct usb_device *usbdev, int is_tnetw1450, int *radio_type)
-+{
-+	char filename[sizeof("tiacx1NNusbcRR")];
-+
-+	firmware_image_t *fw_image = NULL;
-+	char *usbbuf;
-+	unsigned int offset;
-+	unsigned int blk_len, inpipe, outpipe;
-+	u32 num_processed;
-+	u32 img_checksum, sum;
-+	u32 file_size;
-+	int result = -EIO;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* dump_device(usbdev); */
-+
-+	usbbuf = kmalloc(USB_RWMEM_MAXLEN, GFP_KERNEL);
-+	if (!usbbuf) {
-+		printk(KERN_ERR "acx: no memory for USB transfer buffer (%d bytes)\n", USB_RWMEM_MAXLEN);
-+		result = -ENOMEM;
-+		goto end;
-+	}
-+	if (is_tnetw1450) {
-+		/* Obtain the I/O pipes */
-+		outpipe = usb_sndbulkpipe(usbdev, 1);
-+		inpipe = usb_rcvbulkpipe(usbdev, 2);
-+
-+		printk(KERN_DEBUG "wait for device ready\n");
-+		for (i = 0; i <= 2; i++) {
-+			result = usb_bulk_msg(usbdev, inpipe,
-+				usbbuf,
-+				USB_RWMEM_MAXLEN,
-+				&num_processed,
-+				2000
-+				);
-+
-+			if ((*(u32 *)&usbbuf[4] == 0x40000001)
-+			&& (*(u16 *)&usbbuf[2] == 0x1)
-+			&& ((*(u16 *)usbbuf & 0x3fff) == 0)
-+			&& ((*(u16 *)usbbuf & 0xc000) == 0xc000))
-+				break;
-+			msleep(10);
-+		}
-+		if (i == 2)
-+			goto fw_end;
-+
-+		*radio_type = usbbuf[8];
-+	} else {
-+		/* Obtain the I/O pipes */
-+		outpipe = usb_sndctrlpipe(usbdev, 0);
-+		inpipe = usb_rcvctrlpipe(usbdev, 0);
-+
-+		/* FIXME: shouldn't be hardcoded */
-+		*radio_type = RADIO_MAXIM_0D;
-+	}
-+
-+	snprintf(filename, sizeof(filename), "tiacx1%02dusbc%02X",
-+				is_tnetw1450 * 11, *radio_type);
-+
-+	fw_image = acx_s_read_fw(&usbdev->dev, filename, &file_size);
-+	if (!fw_image) {
-+		result = -EIO;
-+		goto end;
-+	}
-+	log(L_INIT, "firmware size: %d bytes\n", file_size);
-+
-+	img_checksum = le32_to_cpu(fw_image->chksum);
-+
-+	if (is_tnetw1450) {
-+		u8 cmdbuf[20];
-+		const u8 *p;
-+		u8 need_padding;
-+		u32 tmplen, val;
-+
-+		memset(cmdbuf, 0, 16);
-+
-+		need_padding = acxusb_fw_needs_padding(fw_image, USB_RWMEM_MAXLEN);
-+		tmplen = need_padding ? file_size-4 : file_size-8;
-+		*(u16 *)&cmdbuf[0] = 0xc000;
-+		*(u16 *)&cmdbuf[2] = 0x000b;
-+		*(u32 *)&cmdbuf[4] = tmplen;
-+		*(u32 *)&cmdbuf[8] = file_size-8;
-+		*(u32 *)&cmdbuf[12] = img_checksum;
-+
-+		result = usb_bulk_msg(usbdev, outpipe, cmdbuf, 16, &num_processed, HZ);
-+		if (result < 0)
-+			goto fw_end;
-+
-+		p = (const u8 *)&fw_image->size;
-+
-+		/* first calculate checksum for image size part */
-+		sum = p[0]+p[1]+p[2]+p[3];
-+		p += 4;
-+
-+		/* now continue checksum for firmware data part */
-+		tmplen = le32_to_cpu(fw_image->size);
-+		for (i = 0; i < tmplen /* image size */; i++) {
-+			sum += *p++;
-+		}
-+
-+		if (sum != le32_to_cpu(fw_image->chksum)) {
-+			printk("acx: FATAL: firmware upload: "
-+				"checksums don't match! "
-+				"(0x%08x vs. 0x%08x)\n",
-+					sum, fw_image->chksum);
-+			goto fw_end;
-+		}
-+
-+		offset = 8;
-+		while (offset < file_size) {
-+			blk_len = file_size - offset;
-+			if (blk_len > USB_RWMEM_MAXLEN) {
-+				blk_len = USB_RWMEM_MAXLEN;
-+			}
-+
-+			log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n",
-+							blk_len, offset);
-+			memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len);
-+
-+			p = usbbuf;
-+			for (i = 0; i < blk_len; i += 4) {
-+				*(u32 *)p = be32_to_cpu(*(u32 *)p);
-+				p += 4;
-+			}
-+
-+			result = usb_bulk_msg(usbdev, outpipe, usbbuf, blk_len, &num_processed, HZ);
-+			if ((result < 0) || (num_processed != blk_len))
-+				goto fw_end;
-+			offset += blk_len;
-+		}
-+		if (need_padding) {
-+			printk(KERN_DEBUG "send padding\n");
-+			memset(usbbuf, 0, 4);
-+			result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ);
-+			if ((result < 0) || (num_processed != 4))
-+				goto fw_end;
-+		}
-+		printk(KERN_DEBUG "read firmware upload result\n");
-+		memset(cmdbuf, 0, 20); /* additional memset */
-+		result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000);
-+		if (result < 0)
-+			goto fw_end;
-+		if (*(u32 *)&cmdbuf[4] == 0x40000003)
-+			goto fw_end;
-+		if (*(u32 *)&cmdbuf[4])
-+			goto fw_end;
-+		if (*(u16 *)&cmdbuf[16] != 1)
-+			goto fw_end;
-+
-+		val = *(u32 *)&cmdbuf[0];
-+		if ((val & 0x3fff)
-+		||  ((val & 0xc000) != 0xc000))
-+			goto fw_end;
-+
-+		val = *(u32 *)&cmdbuf[8];
-+		if (val & 2) {
-+			result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000);
-+			if (result < 0)
-+				goto fw_end;
-+			val = *(u32 *)&cmdbuf[8];
-+		}
-+		/* yup, no "else" here! */
-+		if (val & 1) {
-+			memset(usbbuf, 0, 4);
-+			result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ);
-+			if ((result < 0) || (!num_processed))
-+				goto fw_end;
-+		}
-+
-+		printk("TNETW1450 firmware upload successful!\n");
-+		result = 0;
-+		goto end;
-+fw_end:
-+		result = -EIO;
-+		goto end;
-+	} else {
-+		/* ACX100 USB */
-+
-+		/* now upload the firmware, slice the data into blocks */
-+		offset = 8;
-+		while (offset < file_size) {
-+			blk_len = file_size - offset;
-+			if (blk_len > USB_RWMEM_MAXLEN) {
-+				blk_len = USB_RWMEM_MAXLEN;
-+			}
-+			log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n",
-+							blk_len, offset);
-+			memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len);
-+			result = usb_control_msg(usbdev, outpipe,
-+				ACX_USB_REQ_UPLOAD_FW,
-+				USB_TYPE_VENDOR|USB_DIR_OUT,
-+				(file_size - 8) & 0xffff, /* value */
-+				(file_size - 8) >> 16, /* index */
-+				usbbuf, /* dataptr */
-+				blk_len, /* size */
-+				3000 /* timeout in ms */
-+			);
-+			offset += blk_len;
-+			if (result < 0) {
-+				printk(KERN_ERR "acx: error %d during upload "
-+					"of firmware, aborting\n", result);
-+				goto end;
-+			}
-+		}
-+
-+		/* finally, send the checksum and reboot the device */
-+		/* does this trigger the reboot? */
-+		result = usb_control_msg(usbdev, outpipe,
-+			ACX_USB_REQ_UPLOAD_FW,
-+			USB_TYPE_VENDOR|USB_DIR_OUT,
-+			img_checksum & 0xffff, /* value */
-+			img_checksum >> 16, /* index */
-+			NULL, /* dataptr */
-+			0, /* size */
-+			3000 /* timeout in ms */
-+		);
-+		if (result < 0) {
-+			printk(KERN_ERR "acx: error %d during tx of checksum, "
-+					"aborting\n", result);
-+			goto end;
-+		}
-+		result = usb_control_msg(usbdev, inpipe,
-+			ACX_USB_REQ_ACK_CS,
-+			USB_TYPE_VENDOR|USB_DIR_IN,
-+			img_checksum & 0xffff, /* value */
-+			img_checksum >> 16, /* index */
-+			usbbuf, /* dataptr */
-+			8, /* size */
-+			3000 /* timeout in ms */
-+		);
-+		if (result < 0) {
-+			printk(KERN_ERR "acx: error %d during ACK of checksum, "
-+					"aborting\n", result);
-+			goto end;
-+		}
-+		if (*usbbuf != 0x10) {
-+			printk(KERN_ERR "acx: invalid checksum?\n");
-+			result = -EINVAL;
-+			goto end;
-+		}
-+		result = 0;
-+	}
-+
-+end:
-+	vfree(fw_image);
-+	kfree(usbbuf);
-+
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/* FIXME: maybe merge it with usual eeprom reading, into common code? */
-+static void
-+acxusb_s_read_eeprom_version(acx_device_t *adev)
-+{
-+	u8 eeprom_ver[0x8];
-+
-+	memset(eeprom_ver, 0, sizeof(eeprom_ver));
-+	acx_s_interrogate(adev, &eeprom_ver, ACX1FF_IE_EEPROM_VER);
-+
-+	/* FIXME: which one of those values to take? */
-+	adev->eeprom_version = eeprom_ver[5];
-+}
-+
-+
-+/*
-+ * temporary helper function to at least fill important cfgopt members with
-+ * useful replacement values until we figure out how one manages to fetch
-+ * the configoption struct in the USB device case...
-+ */
-+static int
-+acxusb_s_fill_configoption(acx_device_t *adev)
-+{
-+	adev->cfgopt_probe_delay = 200;
-+	adev->cfgopt_dot11CCAModes = 4;
-+	adev->cfgopt_dot11Diversity = 1;
-+	adev->cfgopt_dot11ShortPreambleOption = 1;
-+	adev->cfgopt_dot11PBCCOption = 1;
-+	adev->cfgopt_dot11ChannelAgility = 0;
-+	adev->cfgopt_dot11PhyType = 5;
-+	adev->cfgopt_dot11TempType = 1;
-+	return OK;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_e_probe()
-+**
-+** This function is invoked by the kernel's USB core whenever a new device is
-+** attached to the system or the module is loaded. It is presented a usb_device
-+** structure from which information regarding the device is obtained and evaluated.
-+** In case this driver is able to handle one of the offered devices, it returns
-+** a non-null pointer to a driver context and thereby claims the device.
-+*/
-+
-+static void
-+dummy_netdev_init(struct net_device *ndev) {}
-+
-+static int
-+acxusb_e_probe(struct usb_interface *intf, const struct usb_device_id *devID)
-+{
-+	struct usb_device *usbdev = interface_to_usbdev(intf);
-+	acx_device_t *adev = NULL;
-+	struct net_device *ndev = NULL;
-+	struct usb_config_descriptor *config;
-+	struct usb_endpoint_descriptor *epdesc;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+	struct usb_host_endpoint *ep;
-+#endif
-+	struct usb_interface_descriptor *ifdesc;
-+	const char* msg;
-+	int numconfigs, numfaces, numep;
-+	int result = OK;
-+	int i;
-+	int radio_type;
-+	/* this one needs to be more precise in case there appears a TNETW1450 from the same vendor */
-+	int is_tnetw1450 = (usbdev->descriptor.idVendor != ACX100_VENDOR_ID);
-+
-+	FN_ENTER;
-+
-+	if (is_tnetw1450) {
-+		/* Boot the device (i.e. upload the firmware) */
-+		acxusb_boot(usbdev, is_tnetw1450, &radio_type);
-+
-+		/* TNETW1450-based cards will continue right away with
-+		 * the same USB ID after booting */
-+	} else {
-+		/* First check if this is the "unbooted" hardware */
-+		if (usbdev->descriptor.idProduct == ACX100_PRODUCT_ID_UNBOOTED) {
-+
-+			/* Boot the device (i.e. upload the firmware) */
-+			acxusb_boot(usbdev, is_tnetw1450, &radio_type);
-+
-+			/* DWL-120+ will first boot the firmware,
-+			 * then later have a *separate* probe() run
-+			 * since its USB ID will have changed after
-+			 * firmware boot!
-+			 * Since the first probe() run has no
-+			 * other purpose than booting the firmware,
-+			 * simply return immediately.
-+			*/
-+			log(L_INIT, "finished booting, returning from probe()\n");
-+			result = OK; /* success */
-+			goto end;
-+		}
-+		else
-+		/* device not unbooted, but invalid USB ID!? */
-+		if (usbdev->descriptor.idProduct != ACX100_PRODUCT_ID_BOOTED)
-+			goto end_nodev;
-+	}
-+
-+/* Ok, so it's our device and it has already booted */
-+
-+	/* Allocate memory for a network device */
-+
-+	ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init);
-+	/* (NB: memsets to 0 entire area) */
-+	if (!ndev) {
-+		msg = "acx: no memory for netdev\n";
-+		goto end_nomem;
-+	}
-+
-+	/* Register the callbacks for the network device functions */
-+
-+	ether_setup(ndev);
-+	ndev->open = &acxusb_e_open;
-+	ndev->stop = &acxusb_e_close;
-+	ndev->hard_start_xmit = (void *)&acx_i_start_xmit;
-+	ndev->get_stats = (void *)&acx_e_get_stats;
-+#if IW_HANDLER_VERSION <= 5
-+	ndev->get_wireless_stats = (void *)&acx_e_get_wireless_stats;
-+#endif
-+	ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
-+	ndev->set_multicast_list = (void *)&acxusb_i_set_rx_mode;
-+#ifdef HAVE_TX_TIMEOUT
-+	ndev->tx_timeout = &acxusb_i_tx_timeout;
-+	ndev->watchdog_timeo = 4 * HZ;
-+#endif
-+	ndev->change_mtu = &acx_e_change_mtu;
-+	SET_MODULE_OWNER(ndev);
-+
-+	/* Setup private driver context */
-+
-+	adev = ndev2adev(ndev);
-+	adev->ndev = ndev;
-+
-+	adev->dev_type = DEVTYPE_USB;
-+	adev->radio_type = radio_type;
-+	if (is_tnetw1450) {
-+		/* well, actually it's a TNETW1450, but since it
-+		 * seems to be sufficiently similar to TNETW1130,
-+		 * I don't want to change large amounts of code now */
-+		adev->chip_type = CHIPTYPE_ACX111;
-+	} else {
-+		adev->chip_type = CHIPTYPE_ACX100;
-+	}
-+
-+	adev->usbdev = usbdev;
-+	spin_lock_init(&adev->lock);    /* initial state: unlocked */
-+	sema_init(&adev->sem, 1);       /* initial state: 1 (upped) */
-+
-+	/* Check that this is really the hardware we know about.
-+	** If not sure, at least notify the user that he
-+	** may be in trouble...
-+	*/
-+	numconfigs = (int)usbdev->descriptor.bNumConfigurations;
-+	if (numconfigs != 1)
-+		printk("acx: number of configurations is %d, "
-+			"this driver only knows how to handle 1, "
-+			"be prepared for surprises\n", numconfigs);
-+
-+	config = &usbdev->config->desc;
-+	numfaces = config->bNumInterfaces;
-+	if (numfaces != 1)
-+		printk("acx: number of interfaces is %d, "
-+			"this driver only knows how to handle 1, "
-+			"be prepared for surprises\n", numfaces);
-+
-+	ifdesc = &intf->altsetting->desc;
-+	numep = ifdesc->bNumEndpoints;
-+	log(L_DEBUG, "# of endpoints: %d\n", numep);
-+
-+	if (is_tnetw1450) {
-+		adev->bulkoutep = 1;
-+		adev->bulkinep = 2;
-+	} else {
-+		/* obtain information about the endpoint
-+		** addresses, begin with some default values
-+		*/
-+		adev->bulkoutep = 1;
-+		adev->bulkinep = 1;
-+		for (i = 0; i < numep; i++) {
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+			ep = usbdev->ep_in[i];
-+			if (!ep)
-+				continue;
-+			epdesc = &ep->desc;
-+#else
-+			epdesc = usb_epnum_to_ep_desc(usbdev, i);
-+			if (!epdesc)
-+				continue;
-+#endif
-+			if (epdesc->bmAttributes & USB_ENDPOINT_XFER_BULK) {
-+				if (epdesc->bEndpointAddress & 0x80)
-+					adev->bulkinep = epdesc->bEndpointAddress & 0xF;
-+				else
-+					adev->bulkoutep = epdesc->bEndpointAddress & 0xF;
-+			}
-+		}
-+	}
-+	log(L_DEBUG, "bulkout ep: 0x%X\n", adev->bulkoutep);
-+	log(L_DEBUG, "bulkin ep: 0x%X\n", adev->bulkinep);
-+
-+	/* already done by memset: adev->rxtruncsize = 0; */
-+	log(L_DEBUG, "TXBUFSIZE=%d RXBUFSIZE=%d\n",
-+				(int) TXBUFSIZE, (int) RXBUFSIZE);
-+
-+	/* Allocate the RX/TX containers. */
-+	adev->usb_tx = kmalloc(sizeof(usb_tx_t) * ACX_TX_URB_CNT, GFP_KERNEL);
-+	if (!adev->usb_tx) {
-+		msg = "acx: no memory for tx container";
-+		goto end_nomem;
-+	}
-+	adev->usb_rx = kmalloc(sizeof(usb_rx_t) * ACX_RX_URB_CNT, GFP_KERNEL);
-+	if (!adev->usb_rx) {
-+		msg = "acx: no memory for rx container";
-+		goto end_nomem;
-+	}
-+
-+	/* Setup URBs for bulk-in/out messages */
-+	for (i = 0; i < ACX_RX_URB_CNT; i++) {
-+		adev->usb_rx[i].urb = usb_alloc_urb(0, GFP_KERNEL);
-+		if (!adev->usb_rx[i].urb) {
-+			msg = "acx: no memory for input URB\n";
-+			goto end_nomem;
-+		}
-+		adev->usb_rx[i].urb->status = 0;
-+		adev->usb_rx[i].adev = adev;
-+		adev->usb_rx[i].busy = 0;
-+	}
-+
-+	for (i = 0; i< ACX_TX_URB_CNT; i++) {
-+		adev->usb_tx[i].urb = usb_alloc_urb(0, GFP_KERNEL);
-+		if (!adev->usb_tx[i].urb) {
-+			msg = "acx: no memory for output URB\n";
-+			goto end_nomem;
-+		}
-+		adev->usb_tx[i].urb->status = 0;
-+		adev->usb_tx[i].adev = adev;
-+		adev->usb_tx[i].busy = 0;
-+	}
-+	adev->tx_free = ACX_TX_URB_CNT;
-+
-+	usb_set_intfdata(intf, adev);
-+	SET_NETDEV_DEV(ndev, &intf->dev);
-+
-+	/* TODO: move all of fw cmds to open()? But then we won't know our MAC addr
-+	   until ifup (it's available via reading ACX1xx_IE_DOT11_STATION_ID)... */
-+
-+	/* put acx out of sleep mode and initialize it */
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+
-+	result = acx_s_init_mac(adev);
-+	if (result)
-+		goto end;
-+
-+	/* TODO: see similar code in pci.c */
-+	acxusb_s_read_eeprom_version(adev);
-+	acxusb_s_fill_configoption(adev);
-+	acx_s_set_defaults(adev);
-+	acx_s_get_firmware_version(adev);
-+	acx_display_hardware_details(adev);
-+
-+	/* Register the network device */
-+	log(L_INIT, "registering network device\n");
-+	result = register_netdev(ndev);
-+	if (result) {
-+		msg = "acx: failed to register USB network device "
-+			"(error %d)\n";
-+		goto end_nomem;
-+	}
-+
-+	acx_proc_register_entries(ndev);
-+
-+	acx_stop_queue(ndev, "on probe");
-+	acx_carrier_off(ndev, "on probe");
-+
-+	printk("acx: USB module " ACX_RELEASE " loaded successfully\n");
-+
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	/* Everything went OK, we are happy now	*/
-+	result = OK;
-+	goto end;
-+
-+end_nomem:
-+	printk(msg, result);
-+
-+	if (ndev) {
-+		if (adev->usb_rx) {
-+			for (i = 0; i < ACX_RX_URB_CNT; i++)
-+				usb_free_urb(adev->usb_rx[i].urb);
-+			kfree(adev->usb_rx);
-+		}
-+		if (adev->usb_tx) {
-+			for (i = 0; i < ACX_TX_URB_CNT; i++)
-+				usb_free_urb(adev->usb_tx[i].urb);
-+			kfree(adev->usb_tx);
-+		}
-+		free_netdev(ndev);
-+	}
-+
-+	result = -ENOMEM;
-+	goto end;
-+
-+end_nodev:
-+	/* no device we could handle, return error. */
-+	result = -EIO;
-+
-+end:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_e_disconnect()
-+**
-+** This function is invoked whenever the user pulls the plug from the USB
-+** device or the module is removed from the kernel. In these cases, the
-+** network devices have to be taken down and all allocated memory has
-+** to be freed.
-+*/
-+static void
-+acxusb_e_disconnect(struct usb_interface *intf)
-+{
-+	acx_device_t *adev = usb_get_intfdata(intf);
-+	unsigned long flags;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	/* No WLAN device... no sense */
-+	if (!adev)
-+		goto end;
-+
-+	/* Unregister network device
-+	 *
-+	 * If the interface is up, unregister_netdev() will take
-+	 * care of calling our close() function, which takes
-+	 * care of unlinking the urbs, sending the device to
-+	 * sleep, etc...
-+	 * This can't be called with sem or lock held because
-+	 * _close() will try to grab it as well if it's called,
-+	 * deadlocking the machine.
-+	 */
-+	unregister_netdev(adev->ndev);
-+
-+	acx_sem_lock(adev);
-+	acx_lock(adev, flags);
-+	/* This device exists no more */
-+	usb_set_intfdata(intf, NULL);
-+	acx_proc_unregister_entries(adev->ndev);
-+
-+	/*
-+	 * Here we only free them. _close() took care of
-+	 * unlinking them.
-+	 */
-+	for (i = 0; i < ACX_RX_URB_CNT; ++i) {
-+		usb_free_urb(adev->usb_rx[i].urb);
-+	}
-+	for (i = 0; i< ACX_TX_URB_CNT; ++i) {
-+		usb_free_urb(adev->usb_tx[i].urb);
-+	}
-+
-+	/* Freeing containers */
-+	kfree(adev->usb_rx);
-+	kfree(adev->usb_tx);
-+
-+	acx_unlock(adev, flags);
-+	acx_sem_unlock(adev);
-+
-+	free_netdev(adev->ndev);
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_e_open()
-+** This function is called when the user sets up the network interface.
-+** It initializes a management timer, sets up the USB card and starts
-+** the network tx queue and USB receive.
-+*/
-+static int
-+acxusb_e_open(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	acx_sem_lock(adev);
-+
-+	/* put the ACX100 out of sleep mode */
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0);
-+
-+	acx_init_task_scheduler(adev);
-+
-+	init_timer(&adev->mgmt_timer);
-+	adev->mgmt_timer.function = acx_i_timer;
-+	adev->mgmt_timer.data = (unsigned long)adev;
-+
-+	/* acx_s_start needs it */
-+	SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	acx_s_start(adev);
-+
-+	/* don't acx_start_queue() here, we need to associate first */
-+
-+	acx_lock(adev, flags);
-+	for (i = 0; i < ACX_RX_URB_CNT; i++) {
-+		adev->usb_rx[i].urb->status = 0;
-+	}
-+
-+	acxusb_l_poll_rx(adev, &adev->usb_rx[0]);
-+
-+	acx_unlock(adev, flags);
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT0;
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_e_close()
-+**
-+** This function stops the network functionality of the interface (invoked
-+** when the user calls ifconfig <wlan> down). The tx queue is halted and
-+** the device is marked as down. In case there were any pending USB bulk
-+** transfers, these are unlinked (asynchronously). The module in-use count
-+** is also decreased in this function.
-+*/
-+static int
-+acxusb_e_close(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	int i;
-+
-+	FN_ENTER;
-+
-+#ifdef WE_STILL_DONT_CARE_ABOUT_IT
-+	/* Transmit a disassociate frame */
-+	lock
-+	acx_l_transmit_disassoc(adev, &client);
-+	unlock
-+#endif
-+
-+	acx_sem_lock(adev);
-+
-+	CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+
-+/* Code below is remarkably similar to acxpci_s_down(). Maybe we can merge them? */
-+
-+	/* Make sure we don't get any more rx requests */
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+
-+	/*
-+	 * We must do FLUSH *without* holding sem to avoid a deadlock.
-+	 * See pci.c:acxpci_s_down() for deails.
-+	 */
-+	acx_sem_unlock(adev);
-+	FLUSH_SCHEDULED_WORK();
-+	acx_sem_lock(adev);
-+
-+	/* Power down the device */
-+	acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0);
-+
-+	/* Stop the transmit queue, mark the device as DOWN */
-+	acx_lock(adev, flags);
-+	acx_stop_queue(ndev, "on ifdown");
-+	acx_set_status(adev, ACX_STATUS_0_STOPPED);
-+	/* stop pending rx/tx urb transfers */
-+	for (i = 0; i < ACX_TX_URB_CNT; i++) {
-+		acxusb_unlink_urb(adev->usb_tx[i].urb);
-+		adev->usb_tx[i].busy = 0;
-+	}
-+	for (i = 0; i < ACX_RX_URB_CNT; i++) {
-+		acxusb_unlink_urb(adev->usb_rx[i].urb);
-+		adev->usb_rx[i].busy = 0;
-+	}
-+	adev->tx_free = ACX_TX_URB_CNT;
-+	acx_unlock(adev, flags);
-+
-+	/* Must do this outside of lock */
-+	del_timer_sync(&adev->mgmt_timer);
-+
-+	acx_sem_unlock(adev);
-+
-+	FN_EXIT0;
-+	return 0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_l_poll_rx
-+** This function (re)initiates a bulk-in USB transfer on a given urb
-+*/
-+static void
-+acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx)
-+{
-+	struct usb_device *usbdev;
-+	struct urb *rxurb;
-+	int errcode, rxnum;
-+	unsigned int inpipe;
-+
-+	FN_ENTER;
-+
-+	rxurb = rx->urb;
-+	usbdev = adev->usbdev;
-+
-+	rxnum = rx - adev->usb_rx;
-+
-+	inpipe = usb_rcvbulkpipe(usbdev, adev->bulkinep);
-+	if (unlikely(rxurb->status == -EINPROGRESS)) {
-+		printk(KERN_ERR "acx: error, rx triggered while rx urb in progress\n");
-+		/* FIXME: this is nasty, receive is being cancelled by this code
-+		 * on the other hand, this should not happen anyway...
-+		 */
-+		usb_unlink_urb(rxurb);
-+	} else
-+	if (unlikely(rxurb->status == -ECONNRESET)) {
-+		log(L_USBRXTX, "acx_usb: _poll_rx: connection reset\n");
-+		goto end;
-+	}
-+	rxurb->actual_length = 0;
-+	usb_fill_bulk_urb(rxurb, usbdev, inpipe,
-+		&rx->bulkin, /* dataptr */
-+		RXBUFSIZE, /* size */
-+		acxusb_i_complete_rx, /* handler */
-+		rx /* handler param */
-+	);
-+	rxurb->transfer_flags = URB_ASYNC_UNLINK;
-+
-+	/* ATOMIC: we may be called from complete_rx() usb callback */
-+	errcode = usb_submit_urb(rxurb, GFP_ATOMIC);
-+	/* FIXME: evaluate the error code! */
-+	log(L_USBRXTX, "SUBMIT RX (%d) inpipe=0x%X size=%d errcode=%d\n",
-+			rxnum, inpipe, (int) RXBUFSIZE, errcode);
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_i_complete_rx()
-+** Inputs:
-+**     urb -> pointer to USB request block
-+**    regs -> pointer to register-buffer for syscalls (see asm/ptrace.h)
-+**
-+** This function is invoked by USB subsystem whenever a bulk receive
-+** request returns.
-+** The received data is then committed to the network stack and the next
-+** USB receive is triggered.
-+*/
-+static void
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxusb_i_complete_rx(struct urb *urb)
-+#else
-+acxusb_i_complete_rx(struct urb *urb, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	rxbuffer_t *ptr;
-+	rxbuffer_t *inbuf;
-+	usb_rx_t *rx;
-+	unsigned long flags;
-+	int size, remsize, packetsize, rxnum;
-+
-+	FN_ENTER;
-+
-+	BUG_ON(!urb->context);
-+
-+	rx = (usb_rx_t *)urb->context;
-+	adev = rx->adev;
-+
-+	acx_lock(adev, flags);
-+
-+	/*
-+	 * Happens on disconnect or close. Don't play with the urb.
-+	 * Don't resubmit it. It will get unlinked by close()
-+	 */
-+	if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) {
-+		log(L_USBRXTX, "rx: device is down, not doing anything\n");
-+		goto end_unlock;
-+	}
-+
-+	inbuf = &rx->bulkin;
-+	size = urb->actual_length;
-+	remsize = size;
-+	rxnum = rx - adev->usb_rx;
-+
-+	log(L_USBRXTX, "RETURN RX (%d) status=%d size=%d\n",
-+				rxnum, urb->status, size);
-+
-+	/* Send the URB that's waiting. */
-+	log(L_USBRXTX, "rxnum=%d, sending=%d\n", rxnum, rxnum^1);
-+	acxusb_l_poll_rx(adev, &adev->usb_rx[rxnum^1]);
-+
-+	if (unlikely(size > sizeof(rxbuffer_t)))
-+		printk("acx_usb: rx too large: %d, please report\n", size);
-+
-+	/* check if the transfer was aborted */
-+	switch (urb->status) {
-+	case 0: /* No error */
-+		break;
-+	case -EOVERFLOW:
-+		printk(KERN_ERR "acx: rx data overrun\n");
-+		adev->rxtruncsize = 0; /* Not valid anymore. */
-+		goto end_unlock;
-+	case -ECONNRESET:
-+		adev->rxtruncsize = 0;
-+		goto end_unlock;
-+	case -ESHUTDOWN: /* rmmod */
-+		adev->rxtruncsize = 0;
-+		goto end_unlock;
-+	default:
-+		adev->rxtruncsize = 0;
-+		adev->stats.rx_errors++;
-+		printk("acx: rx error (urb status=%d)\n", urb->status);
-+		goto end_unlock;
-+	}
-+
-+	if (unlikely(!size))
-+		printk("acx: warning, encountered zerolength rx packet\n");
-+
-+	if (urb->transfer_buffer != inbuf)
-+		goto end_unlock;
-+
-+	/* check if previous frame was truncated
-+	** FIXME: this code can only handle truncation
-+	** of consecutive packets!
-+	*/
-+	ptr = inbuf;
-+	if (adev->rxtruncsize) {
-+		int tail_size;
-+
-+		ptr = &adev->rxtruncbuf;
-+		packetsize = RXBUF_BYTES_USED(ptr);
-+		if (acx_debug & L_USBRXTX) {
-+			printk("handling truncated frame (truncsize=%d size=%d "
-+					"packetsize(from trunc)=%d)\n",
-+					adev->rxtruncsize, size, packetsize);
-+			acx_dump_bytes(ptr, RXBUF_HDRSIZE);
-+			acx_dump_bytes(inbuf, RXBUF_HDRSIZE);
-+		}
-+
-+		/* bytes needed for rxtruncbuf completion: */
-+		tail_size = packetsize - adev->rxtruncsize;
-+
-+		if (size < tail_size) {
-+			/* there is not enough data to complete this packet,
-+			** simply append the stuff to the truncation buffer
-+			*/
-+			memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, size);
-+			adev->rxtruncsize += size;
-+			remsize = 0;
-+		} else {
-+			/* ok, this data completes the previously
-+			** truncated packet. copy it into a descriptor
-+			** and give it to the rest of the stack	*/
-+
-+			/* append tail to previously truncated part
-+			** NB: adev->rxtruncbuf (pointed to by ptr) can't
-+			** overflow because this is already checked before
-+			** truncation buffer was filled. See below,
-+			** "if (packetsize > sizeof(rxbuffer_t))..." code */
-+			memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, tail_size);
-+
-+			if (acx_debug & L_USBRXTX) {
-+				printk("full trailing packet + 12 bytes:\n");
-+				acx_dump_bytes(inbuf, tail_size + RXBUF_HDRSIZE);
-+			}
-+			acx_l_process_rxbuf(adev, ptr);
-+			adev->rxtruncsize = 0;
-+			ptr = (rxbuffer_t *) (((char *)inbuf) + tail_size);
-+			remsize -= tail_size;
-+		}
-+		log(L_USBRXTX, "post-merge size=%d remsize=%d\n",
-+						size, remsize);
-+	}
-+
-+	/* size = USB data block size
-+	** remsize = unprocessed USB bytes left
-+	** ptr = current pos in USB data block
-+	*/
-+	while (remsize) {
-+		if (remsize < RXBUF_HDRSIZE) {
-+			printk("acx: truncated rx header (%d bytes)!\n",
-+				remsize);
-+			if (ACX_DEBUG)
-+				acx_dump_bytes(ptr, remsize);
-+			break;
-+		}
-+
-+		packetsize = RXBUF_BYTES_USED(ptr);
-+		log(L_USBRXTX, "packet with packetsize=%d\n", packetsize);
-+
-+		if (RXBUF_IS_TXSTAT(ptr)) {
-+			/* do rate handling */
-+			usb_txstatus_t *stat = (void*)ptr;
-+			u16 client_no = (u16)stat->hostdata;
-+
-+			log(L_USBRXTX, "tx: stat: mac_cnt_rcvd:%04X "
-+			"queue_index:%02X mac_status:%02X hostdata:%08X "
-+			"rate:%u ack_failures:%02X rts_failures:%02X "
-+			"rts_ok:%02X\n",
-+			stat->mac_cnt_rcvd,
-+			stat->queue_index, stat->mac_status, stat->hostdata,
-+			stat->rate, stat->ack_failures, stat->rts_failures,
-+			stat->rts_ok);
-+
-+			if (adev->rate_auto && client_no < VEC_SIZE(adev->sta_list)) {
-+				client_t *clt = &adev->sta_list[client_no];
-+				u16 cur = stat->hostdata >> 16;
-+
-+				if (clt && clt->rate_cur == cur) {
-+					acx_l_handle_txrate_auto(adev, clt,
-+						cur, /* intended rate */
-+						stat->rate, 0, /* actually used rate */
-+						stat->mac_status, /* error? */
-+						ACX_TX_URB_CNT - adev->tx_free);
-+				}
-+			}
-+			goto next;
-+		}
-+
-+		if (packetsize > sizeof(rxbuffer_t)) {
-+			printk("acx: packet exceeds max wlan "
-+				"frame size (%d > %d). size=%d\n",
-+				packetsize, (int) sizeof(rxbuffer_t), size);
-+			if (ACX_DEBUG)
-+				acx_dump_bytes(ptr, 16);
-+			/* FIXME: put some real error-handling in here! */
-+			break;
-+		}
-+
-+		if (packetsize > remsize) {
-+			/* frame truncation handling */
-+			if (acx_debug & L_USBRXTX) {
-+				printk("need to truncate packet, "
-+					"packetsize=%d remsize=%d "
-+					"size=%d bytes:",
-+					packetsize, remsize, size);
-+				acx_dump_bytes(ptr, RXBUF_HDRSIZE);
-+			}
-+			memcpy(&adev->rxtruncbuf, ptr, remsize);
-+			adev->rxtruncsize = remsize;
-+			break;
-+		}
-+
-+		/* packetsize <= remsize */
-+		/* now handle the received data */
-+		acx_l_process_rxbuf(adev, ptr);
-+next:
-+		ptr = (rxbuffer_t *)(((char *)ptr) + packetsize);
-+		remsize -= packetsize;
-+		if ((acx_debug & L_USBRXTX) && remsize) {
-+			printk("more than one packet in buffer, "
-+						"second packet hdr:");
-+			acx_dump_bytes(ptr, RXBUF_HDRSIZE);
-+		}
-+	}
-+
-+end_unlock:
-+	acx_unlock(adev, flags);
-+/* end: */
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+** acxusb_i_complete_tx()
-+** Inputs:
-+**     urb -> pointer to USB request block
-+**    regs -> pointer to register-buffer for syscalls (see asm/ptrace.h)
-+**
-+** This function is invoked upon termination of a USB transfer.
-+*/
-+static void
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
-+acxusb_i_complete_tx(struct urb *urb)
-+#else
-+acxusb_i_complete_tx(struct urb *urb, struct pt_regs *regs)
-+#endif
-+{
-+	acx_device_t *adev;
-+	usb_tx_t *tx;
-+	unsigned long flags;
-+	int txnum;
-+
-+	FN_ENTER;
-+
-+	BUG_ON(!urb->context);
-+
-+	tx = (usb_tx_t *)urb->context;
-+	adev = tx->adev;
-+
-+	txnum = tx - adev->usb_tx;
-+
-+	acx_lock(adev, flags);
-+
-+	/*
-+	 * If the iface isn't up, we don't have any right
-+	 * to play with them. The urb may get unlinked.
-+	 */
-+	if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) {
-+		log(L_USBRXTX, "tx: device is down, not doing anything\n");
-+		goto end_unlock;
-+	}
-+
-+	log(L_USBRXTX, "RETURN TX (%d): status=%d size=%d\n",
-+				txnum, urb->status, urb->actual_length);
-+
-+	/* handle USB transfer errors */
-+	switch (urb->status) {
-+	case 0:	/* No error */
-+		break;
-+	case -ESHUTDOWN:
-+		goto end_unlock;
-+		break;
-+	case -ECONNRESET:
-+		goto end_unlock;
-+		break;
-+		/* FIXME: real error-handling code here please */
-+	default:
-+		printk(KERN_ERR "acx: tx error, urb status=%d\n", urb->status);
-+		/* FIXME: real error-handling code here please */
-+	}
-+
-+	/* free the URB and check for more data	*/
-+	tx->busy = 0;
-+	adev->tx_free++;
-+	if ((adev->tx_free >= TX_START_QUEUE)
-+	 && (adev->status == ACX_STATUS_4_ASSOCIATED)
-+	 && (acx_queue_stopped(adev->ndev))
-+	) {
-+		log(L_BUF, "tx: wake queue (%u free txbufs)\n",
-+				adev->tx_free);
-+		acx_wake_queue(adev->ndev, NULL);
-+	}
-+
-+end_unlock:
-+	acx_unlock(adev, flags);
-+/* end: */
-+	FN_EXIT0;
-+}
-+
-+
-+/***************************************************************
-+** acxusb_l_alloc_tx
-+** Actually returns a usb_tx_t* ptr
-+*/
-+tx_t*
-+acxusb_l_alloc_tx(acx_device_t *adev)
-+{
-+	usb_tx_t *tx;
-+	unsigned head;
-+
-+	FN_ENTER;
-+
-+	head = adev->tx_head;
-+	do {
-+		head = (head + 1) % ACX_TX_URB_CNT;
-+		if (!adev->usb_tx[head].busy) {
-+			log(L_USBRXTX, "allocated tx %d\n", head);
-+			tx = &adev->usb_tx[head];
-+			tx->busy = 1;
-+			adev->tx_free--;
-+			/* Keep a few free descs between head and tail of tx ring.
-+			** It is not absolutely needed, just feels safer */
-+			if (adev->tx_free < TX_STOP_QUEUE) {
-+				log(L_BUF, "tx: stop queue "
-+					"(%u free txbufs)\n", adev->tx_free);
-+				acx_stop_queue(adev->ndev, NULL);
-+			}
-+			goto end;
-+		}
-+	} while (likely(head!=adev->tx_head));
-+	tx = NULL;
-+	printk_ratelimited("acx: tx buffers full\n");
-+end:
-+	adev->tx_head = head;
-+	FN_EXIT0;
-+	return (tx_t*)tx;
-+}
-+
-+
-+/***************************************************************
-+** Used if alloc_tx()'ed buffer needs to be cancelled without doing tx
-+*/
-+void
-+acxusb_l_dealloc_tx(tx_t *tx_opaque)
-+{
-+	usb_tx_t* tx = (usb_tx_t*)tx_opaque;
-+	tx->busy = 0;
-+}
-+
-+
-+/***************************************************************
-+*/
-+void*
-+acxusb_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque)
-+{
-+	usb_tx_t* tx = (usb_tx_t*)tx_opaque;
-+	return &tx->bulkout.data;
-+}
-+
-+
-+/***************************************************************
-+** acxusb_l_tx_data
-+**
-+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx).
-+** Can be called from acx_i_start_xmit (data frames from net core).
-+*/
-+void
-+acxusb_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int wlanpkt_len)
-+{
-+	struct usb_device *usbdev;
-+	struct urb* txurb;
-+	usb_tx_t* tx;
-+	usb_txbuffer_t* txbuf;
-+	client_t *clt;
-+	wlan_hdr_t* whdr;
-+	unsigned int outpipe;
-+	int ucode, txnum;
-+
-+	FN_ENTER;
-+
-+	tx = ((usb_tx_t *)tx_opaque);
-+	txurb = tx->urb;
-+	txbuf = &tx->bulkout;
-+	whdr = (wlan_hdr_t *)txbuf->data;
-+	txnum = tx - adev->usb_tx;
-+
-+	log(L_DEBUG, "using buf#%d free=%d len=%d\n",
-+			txnum, adev->tx_free, wlanpkt_len);
-+
-+	switch (adev->mode) {
-+	case ACX_MODE_0_ADHOC:
-+	case ACX_MODE_3_AP:
-+		clt = acx_l_sta_list_get(adev, whdr->a1);
-+		break;
-+	case ACX_MODE_2_STA:
-+		clt = adev->ap_client;
-+		break;
-+	default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */
-+		clt = NULL;
-+		break;
-+	}
-+
-+	if (unlikely(clt && !clt->rate_cur)) {
-+		printk("acx: driver bug! bad ratemask\n");
-+		goto end;
-+	}
-+
-+	/* fill the USB transfer header */
-+	txbuf->desc = cpu_to_le16(USB_TXBUF_TXDESC);
-+	txbuf->mpdu_len = cpu_to_le16(wlanpkt_len);
-+	txbuf->queue_index = 1;
-+	if (clt) {
-+		txbuf->rate = clt->rate_100;
-+		txbuf->hostdata = (clt - adev->sta_list) | (clt->rate_cur << 16);
-+	} else {
-+		txbuf->rate = adev->rate_bcast100;
-+		txbuf->hostdata = ((u16)-1) | (adev->rate_bcast << 16);
-+	}
-+	txbuf->ctrl1 = DESC_CTL_FIRSTFRAG;
-+	if (1 == adev->preamble_cur)
-+		SET_BIT(txbuf->ctrl1, DESC_CTL_SHORT_PREAMBLE);
-+	txbuf->ctrl2 = 0;
-+	txbuf->data_len = cpu_to_le16(wlanpkt_len);
-+
-+	if (unlikely(acx_debug & L_DATA)) {
-+		printk("dump of bulk out urb:\n");
-+		acx_dump_bytes(txbuf, wlanpkt_len + USB_TXBUF_HDRSIZE);
-+	}
-+
-+	if (unlikely(txurb->status == -EINPROGRESS)) {
-+		printk("acx: trying to submit tx urb while already in progress\n");
-+	}
-+
-+	/* now schedule the USB transfer */
-+	usbdev = adev->usbdev;
-+	outpipe = usb_sndbulkpipe(usbdev, adev->bulkoutep);
-+
-+	usb_fill_bulk_urb(txurb, usbdev, outpipe,
-+		txbuf, /* dataptr */
-+		wlanpkt_len + USB_TXBUF_HDRSIZE, /* size */
-+		acxusb_i_complete_tx, /* handler */
-+		tx /* handler param */
-+	);
-+
-+	txurb->transfer_flags = URB_ASYNC_UNLINK|URB_ZERO_PACKET;
-+	ucode = usb_submit_urb(txurb, GFP_ATOMIC);
-+	log(L_USBRXTX, "SUBMIT TX (%d): outpipe=0x%X buf=%p txsize=%d "
-+		"rate=%u errcode=%d\n", txnum, outpipe, txbuf,
-+		wlanpkt_len + USB_TXBUF_HDRSIZE, txbuf->rate, ucode);
-+
-+	if (unlikely(ucode)) {
-+		printk(KERN_ERR "acx: submit_urb() error=%d txsize=%d\n",
-+			ucode, wlanpkt_len + USB_TXBUF_HDRSIZE);
-+
-+		/* on error, just mark the frame as done and update
-+		** the statistics
-+		*/
-+		adev->stats.tx_errors++;
-+		tx->busy = 0;
-+		adev->tx_free++;
-+		/* needed? if (adev->tx_free > TX_START_QUEUE) acx_wake_queue(...) */
-+	}
-+end:
-+	FN_EXIT0;
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static void
-+acxusb_i_set_rx_mode(struct net_device *ndev)
-+{
-+}
-+
-+
-+/***********************************************************************
-+*/
-+#ifdef HAVE_TX_TIMEOUT
-+static void
-+acxusb_i_tx_timeout(struct net_device *ndev)
-+{
-+	acx_device_t *adev = ndev2adev(ndev);
-+	unsigned long flags;
-+	int i;
-+
-+	FN_ENTER;
-+
-+	acx_lock(adev, flags);
-+	/* unlink the URBs */
-+	for (i = 0; i < ACX_TX_URB_CNT; i++) {
-+		acxusb_unlink_urb(adev->usb_tx[i].urb);
-+		adev->usb_tx[i].busy = 0;
-+	}
-+	adev->tx_free = ACX_TX_URB_CNT;
-+	/* TODO: stats update */
-+	acx_unlock(adev, flags);
-+
-+	FN_EXIT0;
-+}
-+#endif
-+
-+
-+/***********************************************************************
-+** init_module()
-+**
-+** This function is invoked upon loading of the kernel module.
-+** It registers itself at the kernel's USB subsystem.
-+**
-+** Returns: Errorcode on failure, 0 on success
-+*/
-+int __init
-+acxusb_e_init_module(void)
-+{
-+	log(L_INIT, "USB module " ACX_RELEASE " initialized, "
-+		"probing for devices...\n");
-+	return usb_register(&acxusb_driver);
-+}
-+
-+
-+
-+/***********************************************************************
-+** cleanup_module()
-+**
-+** This function is invoked as last step of the module unloading. It simply
-+** deregisters this module at the kernel's USB subsystem.
-+*/
-+void __exit
-+acxusb_e_cleanup_module()
-+{
-+	usb_deregister(&acxusb_driver);
-+}
-+
-+
-+/***********************************************************************
-+** DEBUG STUFF
-+*/
-+#if ACX_DEBUG
-+
-+#ifdef UNUSED
-+static void
-+dump_device(struct usb_device *usbdev)
-+{
-+	int i;
-+	struct usb_config_descriptor *cd;
-+
-+	printk("acx device dump:\n");
-+	printk("  devnum: %d\n", usbdev->devnum);
-+	printk("  speed: %d\n", usbdev->speed);
-+	printk("  tt: 0x%X\n", (unsigned int)(usbdev->tt));
-+	printk("  ttport: %d\n", (unsigned int)(usbdev->ttport));
-+	printk("  toggle[0]: 0x%X  toggle[1]: 0x%X\n", (unsigned int)(usbdev->toggle[0]), (unsigned int)(usbdev->toggle[1]));
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-+	/* This saw a change after 2.6.10 */
-+	printk("  ep_in wMaxPacketSize: ");
-+	for (i = 0; i < 16; ++i)
-+		if (usbdev->ep_in[i] != NULL)
-+			printk("%d:%d ", i, usbdev->ep_in[i]->desc.wMaxPacketSize);
-+	printk("\n");
-+	printk("  ep_out wMaxPacketSize: ");
-+	for (i = 0; i < VEC_SIZE(usbdev->ep_out); ++i)
-+		if (usbdev->ep_out[i] != NULL)
-+			printk("%d:%d ", i, usbdev->ep_out[i]->desc.wMaxPacketSize);
-+	printk("\n");
-+#else
-+	printk("  epmaxpacketin: ");
-+	for (i = 0; i < 16; i++)
-+		printk("%d ", usbdev->epmaxpacketin[i]);
-+	printk("\n");
-+	printk("  epmaxpacketout: ");
-+	for (i = 0; i < 16; i++)
-+		printk("%d ", usbdev->epmaxpacketout[i]);
-+	printk("\n");
-+#endif
-+	printk("  parent: 0x%X\n", (unsigned int)usbdev->parent);
-+	printk("  bus: 0x%X\n", (unsigned int)usbdev->bus);
-+#ifdef NO_DATATYPE
-+	printk("  configs: ");
-+	for (i = 0; i < usbdev->descriptor.bNumConfigurations; i++)
-+		printk("0x%X ", usbdev->config[i]);
-+	printk("\n");
-+#endif
-+	printk("  actconfig: %p\n", usbdev->actconfig);
-+	dump_device_descriptor(&usbdev->descriptor);
-+
-+	cd = &usbdev->config->desc;
-+	dump_config_descriptor(cd);
-+}
-+
-+
-+/***********************************************************************
-+*/
-+static void
-+dump_config_descriptor(struct usb_config_descriptor *cd)
-+{
-+	printk("Configuration Descriptor:\n");
-+	if (!cd) {
-+		printk("NULL\n");
-+		return;
-+	}
-+	printk("  bLength: %d (0x%X)\n", cd->bLength, cd->bLength);
-+	printk("  bDescriptorType: %d (0x%X)\n", cd->bDescriptorType, cd->bDescriptorType);
-+	printk("  bNumInterfaces: %d (0x%X)\n", cd->bNumInterfaces, cd->bNumInterfaces);
-+	printk("  bConfigurationValue: %d (0x%X)\n", cd->bConfigurationValue, cd->bConfigurationValue);
-+	printk("  iConfiguration: %d (0x%X)\n", cd->iConfiguration, cd->iConfiguration);
-+	printk("  bmAttributes: %d (0x%X)\n", cd->bmAttributes, cd->bmAttributes);
-+	/* printk("  MaxPower: %d (0x%X)\n", cd->bMaxPower, cd->bMaxPower); */
-+}
-+
-+
-+static void
-+dump_device_descriptor(struct usb_device_descriptor *dd)
-+{
-+	printk("Device Descriptor:\n");
-+	if (!dd) {
-+		printk("NULL\n");
-+		return;
-+	}
-+	printk("  bLength: %d (0x%X)\n", dd->bLength, dd->bLength);
-+	printk("  bDescriptortype: %d (0x%X)\n", dd->bDescriptorType, dd->bDescriptorType);
-+	printk("  bcdUSB: %d (0x%X)\n", dd->bcdUSB, dd->bcdUSB);
-+	printk("  bDeviceClass: %d (0x%X)\n", dd->bDeviceClass, dd->bDeviceClass);
-+	printk("  bDeviceSubClass: %d (0x%X)\n", dd->bDeviceSubClass, dd->bDeviceSubClass);
-+	printk("  bDeviceProtocol: %d (0x%X)\n", dd->bDeviceProtocol, dd->bDeviceProtocol);
-+	printk("  bMaxPacketSize0: %d (0x%X)\n", dd->bMaxPacketSize0, dd->bMaxPacketSize0);
-+	printk("  idVendor: %d (0x%X)\n", dd->idVendor, dd->idVendor);
-+	printk("  idProduct: %d (0x%X)\n", dd->idProduct, dd->idProduct);
-+	printk("  bcdDevice: %d (0x%X)\n", dd->bcdDevice, dd->bcdDevice);
-+	printk("  iManufacturer: %d (0x%X)\n", dd->iManufacturer, dd->iManufacturer);
-+	printk("  iProduct: %d (0x%X)\n", dd->iProduct, dd->iProduct);
-+	printk("  iSerialNumber: %d (0x%X)\n", dd->iSerialNumber, dd->iSerialNumber);
-+	printk("  bNumConfigurations: %d (0x%X)\n", dd->bNumConfigurations, dd->bNumConfigurations);
-+}
-+#endif /* UNUSED */
-+
-+#endif /* ACX_DEBUG */
-Index: linux-2.6.23/drivers/net/wireless/acx/wlan.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/wlan.c	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,424 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** This code is based on elements which are
-+** Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-+** info@linux-wlan.com
-+** http://www.linux-wlan.com
-+*/
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
-+#include <linux/config.h>
-+#endif
-+#include <linux/types.h>
-+#include <linux/if_arp.h>
-+#include <linux/wireless.h>
-+#include <net/iw_handler.h>
-+
-+#include "acx.h"
-+
-+
-+/***********************************************************************
-+*/
-+#define LOG_BAD_EID(hdr,len,ie_ptr) acx_log_bad_eid(hdr, len, ((wlan_ie_t*)ie_ptr))
-+
-+#define IE_EID(ie_ptr) (((wlan_ie_t*)(ie_ptr))->eid)
-+#define IE_LEN(ie_ptr) (((wlan_ie_t*)(ie_ptr))->len)
-+#define OFFSET(hdr,off) (WLAN_HDR_A3_DATAP(hdr) + (off))
-+
-+
-+/***********************************************************************
-+** wlan_mgmt_decode_XXX
-+**
-+** Given a complete frame in f->hdr, sets the pointers in f to
-+** the areas that correspond to the parts of the frame.
-+**
-+** Assumptions:
-+**	1) f->len and f->hdr are already set
-+**	2) f->len is the length of the MAC header + data, the FCS
-+**	   is NOT included
-+**	3) all members except len and hdr are zero
-+** Arguments:
-+**	f	frame structure
-+**
-+** Returns:
-+**	nothing
-+**
-+** Side effects:
-+**	frame structure members are pointing at their
-+**	respective portions of the frame buffer.
-+*/
-+void
-+wlan_mgmt_decode_beacon(wlan_fr_beacon_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_BEACON;
-+
-+	/*-- Fixed Fields ----*/
-+	f->ts = (u64 *) OFFSET(f->hdr, WLAN_BEACON_OFF_TS);
-+	f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_BCN_INT);
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_CAPINFO);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_BEACON_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_FH_PARMS:
-+			f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_DS_PARMS:
-+			f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_CF_PARMS:
-+			f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_IBSS_PARMS:
-+			f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_TIM:
-+			f->tim = (wlan_ie_tim_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_ERP_INFO:
-+			f->erp = (wlan_ie_erp_t *) ie_ptr;
-+			break;
-+
-+		case WLAN_EID_COUNTRY:
-+		/* was seen: 07 06 47 42 20 01 0D 14 */
-+		case WLAN_EID_PWR_CONSTRAINT:
-+		/* was seen by Ashwin Mansinghka <ashwin_man@yahoo.com> from
-+		Atheros-based PCI card in AP mode using madwifi drivers: */
-+		/* 20 01 00 */
-+		case WLAN_EID_NONERP:
-+		/* was seen from WRT54GS with OpenWrt: 2F 01 07 */
-+		case WLAN_EID_UNKNOWN128:
-+		/* was seen by Jacek Jablonski <conexion2000@gmail.com> from Orinoco AP */
-+		/* 80 06 00 60 1D 2C 3B 00 */
-+		case WLAN_EID_UNKNOWN133:
-+		/* was seen by David Bronaugh <dbronaugh@linuxboxen.org> from ???? */
-+		/* 85 1E 00 00 84 12 07 00 FF 00 11 00 61 70 63 31 */
-+		/* 63 73 72 30 34 32 00 00 00 00 00 00 00 00 00 25 */
-+		case WLAN_EID_UNKNOWN223:
-+		/* was seen by Carlos Martin <carlosmn@gmail.com> from ???? */
-+		/* DF 20 01 1E 04 00 00 00 06 63 09 02 FF 0F 30 30 */
-+		/* 30 42 36 42 33 34 30 39 46 31 00 00 00 00 00 00 00 00 */
-+		case WLAN_EID_GENERIC:
-+		/* WPA: hostap code:
-+			if (pos[1] >= 4 &&
-+				pos[2] == 0x00 && pos[3] == 0x50 &&
-+				pos[4] == 0xf2 && pos[5] == 1) {
-+				wpa = pos;
-+				wpa_len = pos[1] + 2;
-+			}
-+		TI x4 mode: seen DD 04 08 00 28 00
-+		(08 00 28 is TI's OUI)
-+		last byte is probably 0/1 - disabled/enabled
-+		*/
-+		case WLAN_EID_RSN:
-+		/* hostap does something with it:
-+			rsn = pos;
-+			rsn_len = pos[1] + 2;
-+		*/
-+			break;
-+
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+
-+
-+#ifdef UNUSED
-+void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t * f)
-+{
-+	f->type = WLAN_FSTYPE_ATIM;
-+	/*-- Fixed Fields ----*/
-+	/*-- Information elements */
-+}
-+#endif /* UNUSED */
-+
-+void
-+wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t * f)
-+{
-+	f->type = WLAN_FSTYPE_DISASSOC;
-+
-+	/*-- Fixed Fields ----*/
-+	f->reason = (u16 *) OFFSET(f->hdr, WLAN_DISASSOC_OFF_REASON);
-+
-+	/*-- Information elements */
-+}
-+
-+
-+void
-+wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+
-+	f->type = WLAN_FSTYPE_ASSOCREQ;
-+
-+	/*-- Fixed Fields ----*/
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_CAP_INFO);
-+	f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_LISTEN_INT);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+
-+
-+void
-+wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t * f)
-+{
-+	f->type = WLAN_FSTYPE_ASSOCRESP;
-+
-+	/*-- Fixed Fields ----*/
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_CAP_INFO);
-+	f->status = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_STATUS);
-+	f->aid = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_AID);
-+
-+	/*-- Information elements */
-+	f->supp_rates = (wlan_ie_supp_rates_t *)
-+			OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_SUPP_RATES);
-+}
-+
-+
-+#ifdef UNUSED
-+void
-+wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_REASSOCREQ;
-+
-+	/*-- Fixed Fields ----*/
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CAP_INFO);
-+	f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_LISTEN_INT);
-+	f->curr_ap = (u8 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CURR_AP);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+
-+
-+void
-+wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t * f)
-+{
-+	f->type = WLAN_FSTYPE_REASSOCRESP;
-+
-+	/*-- Fixed Fields ----*/
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_CAP_INFO);
-+	f->status = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_STATUS);
-+	f->aid = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_AID);
-+
-+	/*-- Information elements */
-+	f->supp_rates = (wlan_ie_supp_rates_t *)
-+			OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_SUPP_RATES);
-+}
-+
-+
-+void
-+wlan_mgmt_decode_probereq(wlan_fr_probereq_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_PROBEREQ;
-+
-+	/*-- Fixed Fields ----*/
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_PROBEREQ_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+#endif /* UNUSED */
-+
-+
-+/* TODO: decoding of beacon and proberesp can be merged (similar structure) */
-+void
-+wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_PROBERESP;
-+
-+	/*-- Fixed Fields ----*/
-+	f->ts = (u64 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_TS);
-+	f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_BCN_INT);
-+	f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_CAP_INFO);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_PROBERESP_OFF_SSID);
-+	while (ie_ptr < end) {
-+		switch (IE_EID(ie_ptr)) {
-+		case WLAN_EID_SSID:
-+			f->ssid = (wlan_ie_ssid_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_SUPP_RATES:
-+			f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_EXT_RATES:
-+			f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_FH_PARMS:
-+			f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_DS_PARMS:
-+			f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_CF_PARMS:
-+			f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr;
-+			break;
-+		case WLAN_EID_IBSS_PARMS:
-+			f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr;
-+			break;
-+#ifdef DONT_DO_IT_ADD_REAL_HANDLING_INSTEAD
-+		case WLAN_EID_COUNTRY:
-+			break;
-+		...
-+#endif
-+#ifdef SENT_HERE_BY_OPENWRT
-+		/* should those be trapped or handled?? */
-+		case WLAN_EID_ERP_INFO:
-+			break;
-+		case WLAN_EID_NONERP:
-+			break;
-+		case WLAN_EID_GENERIC:
-+			break;
-+#endif
-+		default:
-+			LOG_BAD_EID(f->hdr, f->len, ie_ptr);
-+			break;
-+		}
-+
-+		ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr);
-+	}
-+}
-+
-+
-+void
-+wlan_mgmt_decode_authen(wlan_fr_authen_t * f)
-+{
-+	u8 *ie_ptr;
-+	u8 *end = (u8*)f->hdr + f->len;
-+
-+	f->type = WLAN_FSTYPE_AUTHEN;
-+
-+	/*-- Fixed Fields ----*/
-+	f->auth_alg = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_ALG);
-+	f->auth_seq = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_SEQ);
-+	f->status = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_STATUS);
-+
-+	/*-- Information elements */
-+	ie_ptr = OFFSET(f->hdr, WLAN_AUTHEN_OFF_CHALLENGE);
-+	if ((ie_ptr < end) && (IE_EID(ie_ptr) == WLAN_EID_CHALLENGE)) {
-+		f->challenge = (wlan_ie_challenge_t *) ie_ptr;
-+	}
-+}
-+
-+
-+void
-+wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t * f)
-+{
-+	f->type = WLAN_FSTYPE_DEAUTHEN;
-+
-+	/*-- Fixed Fields ----*/
-+	f->reason = (u16 *) OFFSET(f->hdr, WLAN_DEAUTHEN_OFF_REASON);
-+
-+	/*-- Information elements */
-+}
-Index: linux-2.6.23/drivers/net/wireless/acx/wlan_compat.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/wlan_compat.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,260 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** This code is based on elements which are
-+** Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-+** info@linux-wlan.com
-+** http://www.linux-wlan.com
-+*/
-+
-+/*=============================================================*/
-+/*------ Establish Platform Identity --------------------------*/
-+/*=============================================================*/
-+/* Key macros: */
-+/* WLAN_CPU_FAMILY */
-+#define WLAN_Ix86			1
-+#define WLAN_PPC			2
-+#define WLAN_Ix96			3
-+#define WLAN_ARM			4
-+#define WLAN_ALPHA			5
-+#define WLAN_MIPS			6
-+#define WLAN_HPPA			7
-+#define WLAN_SPARC			8
-+#define WLAN_SH				9
-+#define WLAN_x86_64			10
-+/* WLAN_CPU_CORE */
-+#define WLAN_I386CORE			1
-+#define WLAN_PPCCORE			2
-+#define WLAN_I296			3
-+#define WLAN_ARMCORE			4
-+#define WLAN_ALPHACORE			5
-+#define WLAN_MIPSCORE			6
-+#define WLAN_HPPACORE			7
-+/* WLAN_CPU_PART */
-+#define WLAN_I386PART			1
-+#define WLAN_MPC860			2
-+#define WLAN_MPC823			3
-+#define WLAN_I296SA			4
-+#define WLAN_PPCPART			5
-+#define WLAN_ARMPART			6
-+#define WLAN_ALPHAPART			7
-+#define WLAN_MIPSPART			8
-+#define WLAN_HPPAPART			9
-+/* WLAN_SYSARCH */
-+#define WLAN_PCAT			1
-+#define WLAN_MBX			2
-+#define WLAN_RPX			3
-+#define WLAN_LWARCH			4
-+#define WLAN_PMAC			5
-+#define WLAN_SKIFF			6
-+#define WLAN_BITSY			7
-+#define WLAN_ALPHAARCH			7
-+#define WLAN_MIPSARCH			9
-+#define WLAN_HPPAARCH			10
-+/* WLAN_HOSTIF (generally set on the command line, not detected) */
-+#define WLAN_PCMCIA			1
-+#define WLAN_ISA			2
-+#define WLAN_PCI			3
-+#define WLAN_USB			4
-+#define WLAN_PLX			5
-+
-+/* Note: the PLX HOSTIF above refers to some vendors implementations for */
-+/*       PCI.  It's a PLX chip that is a PCI to PCMCIA adapter, but it   */
-+/*       isn't a real PCMCIA host interface adapter providing all the    */
-+/*       card&socket services.                                           */
-+
-+#ifdef __powerpc__
-+#ifndef __ppc__
-+#define __ppc__
-+#endif
-+#endif
-+
-+#if (defined(CONFIG_PPC) || defined(CONFIG_8xx))
-+#ifndef __ppc__
-+#define __ppc__
-+#endif
-+#endif
-+
-+#if defined(__x86_64__)
-+ #define WLAN_CPU_FAMILY	WLAN_x86_64
-+ #define WLAN_SYSARCH		WLAN_PCAT
-+#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__)
-+ #define WLAN_CPU_FAMILY	WLAN_Ix86
-+ #define WLAN_CPU_CORE		WLAN_I386CORE
-+ #define WLAN_CPU_PART		WLAN_I386PART
-+ #define WLAN_SYSARCH		WLAN_PCAT
-+#elif defined(__ppc__)
-+ #define WLAN_CPU_FAMILY	WLAN_PPC
-+ #define WLAN_CPU_CORE		WLAN_PPCCORE
-+ #if defined(CONFIG_MBX)
-+  #define WLAN_CPU_PART		WLAN_MPC860
-+  #define WLAN_SYSARCH		WLAN_MBX
-+ #elif defined(CONFIG_RPXLITE)
-+  #define WLAN_CPU_PART		WLAN_MPC823
-+  #define WLAN_SYSARCH		WLAN_RPX
-+ #elif defined(CONFIG_RPXCLASSIC)
-+  #define WLAN_CPU_PART		WLAN_MPC860
-+  #define WLAN_SYSARCH		WLAN_RPX
-+ #else
-+  #define WLAN_CPU_PART		WLAN_PPCPART
-+  #define WLAN_SYSARCH		WLAN_PMAC
-+ #endif
-+#elif defined(__arm__)
-+ #define WLAN_CPU_FAMILY	WLAN_ARM
-+ #define WLAN_CPU_CORE		WLAN_ARMCORE
-+ #define WLAN_CPU_PART		WLAN_ARM_PART
-+ #define WLAN_SYSARCH		WLAN_SKIFF
-+#elif defined(__alpha__)
-+ #define WLAN_CPU_FAMILY	WLAN_ALPHA
-+ #define WLAN_CPU_CORE		WLAN_ALPHACORE
-+ #define WLAN_CPU_PART		WLAN_ALPHAPART
-+ #define WLAN_SYSARCH		WLAN_ALPHAARCH
-+#elif defined(__mips__)
-+ #define WLAN_CPU_FAMILY	WLAN_MIPS
-+ #define WLAN_CPU_CORE		WLAN_MIPSCORE
-+ #define WLAN_CPU_PART		WLAN_MIPSPART
-+ #define WLAN_SYSARCH		WLAN_MIPSARCH
-+#elif defined(__hppa__)
-+ #define WLAN_CPU_FAMILY	WLAN_HPPA
-+ #define WLAN_CPU_CORE		WLAN_HPPACORE
-+ #define WLAN_CPU_PART		WLAN_HPPAPART
-+ #define WLAN_SYSARCH		WLAN_HPPAARCH
-+#elif defined(__sparc__)
-+ #define WLAN_CPU_FAMILY	WLAN_SPARC
-+ #define WLAN_SYSARCH		WLAN_SPARC
-+#elif defined(__sh__)
-+ #define WLAN_CPU_FAMILY	WLAN_SH
-+ #define WLAN_SYSARCH		WLAN_SHARCH
-+ #ifndef __LITTLE_ENDIAN__
-+  #define __LITTLE_ENDIAN__
-+ #endif
-+#else
-+ #error "No CPU identified!"
-+#endif
-+
-+/*
-+   Some big endian machines implicitly do all I/O in little endian mode.
-+
-+   In particular:
-+	  Linux/PPC on PowerMacs (PCI)
-+	  Arm/Intel Xscale (PCI)
-+
-+   This may also affect PLX boards and other BE &| PPC platforms;
-+   as new ones are discovered, add them below.
-+*/
-+
-+#if ((WLAN_SYSARCH == WLAN_SKIFF) || (WLAN_SYSARCH == WLAN_PMAC))
-+#define REVERSE_ENDIAN
-+#endif
-+
-+/*=============================================================*/
-+/*------ Hardware Portability Macros --------------------------*/
-+/*=============================================================*/
-+#if (WLAN_CPU_FAMILY == WLAN_PPC)
-+#define wlan_inw(a)                     in_be16((unsigned short *)((a)+_IO_BASE))
-+#define wlan_inw_le16_to_cpu(a)         inw((a))
-+#define wlan_outw(v,a)                  out_be16((unsigned short *)((a)+_IO_BASE), (v))
-+#define wlan_outw_cpu_to_le16(v,a)      outw((v),(a))
-+#else
-+#define wlan_inw(a)                     inw((a))
-+#define wlan_inw_le16_to_cpu(a)         __cpu_to_le16(inw((a)))
-+#define wlan_outw(v,a)                  outw((v),(a))
-+#define wlan_outw_cpu_to_le16(v,a)      outw(__cpu_to_le16((v)),(a))
-+#endif
-+
-+/*=============================================================*/
-+/*------ Bit settings -----------------------------------------*/
-+/*=============================================================*/
-+#define ieee2host16(n)	__le16_to_cpu(n)
-+#define ieee2host32(n)	__le32_to_cpu(n)
-+#define host2ieee16(n)	__cpu_to_le16(n)
-+#define host2ieee32(n)	__cpu_to_le32(n)
-+
-+/* for constants */
-+#ifdef __LITTLE_ENDIAN
-+ #define IEEE16(a,n)     a = n, a##i = n,
-+#else
-+ #ifdef __BIG_ENDIAN
-+  /* shifts would produce gcc warnings. Oh well... */
-+  #define IEEE16(a,n)     a = n, a##i = ((n&0xff)*256 + ((n&0xff00)/256)),
-+ #else
-+  #error give me endianness or give me death
-+ #endif
-+#endif
-+
-+/*=============================================================*/
-+/*------ Compiler Portability Macros --------------------------*/
-+/*=============================================================*/
-+#define WLAN_PACKED	__attribute__ ((packed))
-+
-+/* Interrupt handler backwards compatibility stuff */
-+#ifndef IRQ_NONE
-+#define IRQ_NONE
-+#define IRQ_HANDLED
-+typedef void irqreturn_t;
-+#endif
-+
-+#ifndef ARPHRD_IEEE80211_PRISM
-+#define ARPHRD_IEEE80211_PRISM 802
-+#endif
-+
-+#define ETH_P_80211_RAW		(ETH_P_ECONET + 1)
-+
-+/*============================================================================*
-+ * Constants                                                                  *
-+ *============================================================================*/
-+#define WLAN_IEEE_OUI_LEN	3
-+
-+/*============================================================================*
-+ * Types                                                                      *
-+ *============================================================================*/
-+
-+/* local ether header type */
-+typedef struct wlan_ethhdr {
-+	u8	daddr[ETH_ALEN];
-+	u8	saddr[ETH_ALEN];
-+	u16	type;
-+} WLAN_PACKED wlan_ethhdr_t;
-+
-+/* local llc header type */
-+typedef struct wlan_llc {
-+	u8	dsap;
-+	u8	ssap;
-+	u8	ctl;
-+} WLAN_PACKED wlan_llc_t;
-+
-+/* local snap header type */
-+typedef struct wlan_snap {
-+	u8	oui[WLAN_IEEE_OUI_LEN];
-+	u16	type;
-+} WLAN_PACKED wlan_snap_t;
-Index: linux-2.6.23/drivers/net/wireless/acx/wlan_hdr.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/wlan_hdr.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,497 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** This code is based on elements which are
-+** Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-+** info@linux-wlan.com
-+** http://www.linux-wlan.com
-+*/
-+
-+/* mini-doc
-+
-+Here are all 11b/11g/11a rates and modulations:
-+
-+     11b 11g 11a
-+     --- --- ---
-+ 1  |B  |B  |
-+ 2  |Q  |Q  |
-+ 5.5|Cp |C p|
-+ 6  |   |Od |O
-+ 9  |   |od |o
-+11  |Cp |C p|
-+12  |   |Od |O
-+18  |   |od |o
-+22  |   |  p|
-+24  |   |Od |O
-+33  |   |  p|
-+36  |   |od |o
-+48  |   |od |o
-+54  |   |od |o
-+
-+Mandatory:
-+ B - DBPSK (Differential Binary Phase Shift Keying)
-+ Q - DQPSK (Differential Quaternary Phase Shift Keying)
-+ C - CCK (Complementary Code Keying, a form of DSSS
-+		(Direct Sequence Spread Spectrum) modulation)
-+ O - OFDM (Orthogonal Frequency Division Multiplexing)
-+Optional:
-+ o - OFDM
-+ d - CCK-OFDM (also known as DSSS-OFDM)
-+ p - PBCC (Packet Binary Convolutional Coding)
-+
-+The term CCK-OFDM may be used interchangeably with DSSS-OFDM
-+(the IEEE 802.11g-2003 standard uses the latter terminology).
-+In the CCK-OFDM, the PLCP header of the frame uses the CCK form of DSSS,
-+while the PLCP payload (the MAC frame) is modulated using OFDM.
-+
-+Basically, you must use CCK-OFDM if you have mixed 11b/11g environment,
-+or else (pure OFDM) 11b equipment may not realize that AP
-+is sending a packet and start sending its own one.
-+Sadly, looks like acx111 does not support CCK-OFDM, only pure OFDM.
-+
-+Re PBCC: avoid using it. It makes sense only if you have
-+TI "11b+" hardware. You _must_ use PBCC in order to reach 22Mbps on it.
-+
-+Preambles:
-+
-+Long preamble (at 1Mbit rate, takes 144 us):
-+    16 bytes	ones
-+     2 bytes	0xF3A0 (lsb sent first)
-+PLCP header follows (at 1Mbit also):
-+     1 byte	Signal: speed, in 0.1Mbit units, except for:
-+		33Mbit: 33 (instead of 330 - doesn't fit in octet)
-+		all CCK-OFDM rates: 30
-+     1 byte	Service
-+	0,1,4:	reserved
-+	2:	1=locked clock
-+	3:	1=PBCC
-+	5:	Length Extension (PBCC 22,33Mbit (11g only))  <-
-+	6:	Length Extension (PBCC 22,33Mbit (11g only))  <- BLACK MAGIC HERE
-+	7:	Length Extension                              <-
-+     2 bytes	Length (time needed to tx this frame)
-+		a) 5.5 Mbit/s CCK
-+		   Length = octets*8/5.5, rounded up to integer
-+		b) 11 Mbit/s CCK
-+		   Length = octets*8/11, rounded up to integer
-+		   Service bit 7:
-+			0 = rounding took less than 8/11
-+			1 = rounding took more than or equal to 8/11
-+		c) 5.5 Mbit/s PBCC
-+		   Length = (octets+1)*8/5.5, rounded up to integer
-+		d) 11 Mbit/s PBCC
-+		   Length = (octets+1)*8/11, rounded up to integer
-+		   Service bit 7:
-+			0 = rounding took less than 8/11
-+			1 = rounding took more than or equal to 8/11
-+		e) 22 Mbit/s PBCC
-+		   Length = (octets+1)*8/22, rounded up to integer
-+		   Service bits 6,7:
-+			00 = rounding took less than 8/22ths
-+			01 = rounding took 8/22...15/22ths
-+			10 = rounding took 16/22ths or more.
-+		f) 33 Mbit/s PBCC
-+		   Length = (octets+1)*8/33, rounded up to integer
-+		   Service bits 5,6,7:
-+			000 rounding took less than 8/33
-+			001 rounding took 8/33...15/33
-+			010 rounding took 16/33...23/33
-+			011 rounding took 24/33...31/33
-+			100 rounding took 32/33 or more
-+     2 bytes	CRC
-+
-+PSDU follows (up to 2346 bytes at selected rate)
-+
-+While Signal value alone is not enough to determine rate and modulation,
-+Signal+Service is always sufficient.
-+
-+Short preamble (at 1Mbit rate, takes 72 us):
-+     7 bytes	zeroes
-+     2 bytes	0x05CF (lsb sent first)
-+PLCP header follows *at 2Mbit/s*. Format is the same as in long preamble.
-+PSDU follows (up to 2346 bytes at selected rate)
-+
-+OFDM preamble is completely different, uses OFDM
-+modulation from the start and thus easily identifiable.
-+Not shown here.
-+*/
-+
-+
-+/***********************************************************************
-+** Constants
-+*/
-+
-+#define WLAN_HDR_A3_LEN			24
-+#define WLAN_HDR_A4_LEN			30
-+/* IV structure:
-+** 3 bytes: Initialization Vector (24 bits)
-+** 1 byte: 0..5: padding, must be 0; 6..7: key selector (0-3)
-+*/
-+#define WLAN_WEP_IV_LEN			4
-+/* 802.11 says 2312 but looks like 2312 is a max size of _WEPed data_ */
-+#define WLAN_DATA_MAXLEN		2304
-+#define WLAN_WEP_ICV_LEN		4
-+#define WLAN_FCS_LEN			4
-+#define WLAN_A3FR_MAXLEN		(WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN)
-+#define WLAN_A4FR_MAXLEN		(WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN)
-+#define WLAN_A3FR_MAXLEN_FCS		(WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN + 4)
-+#define WLAN_A4FR_MAXLEN_FCS		(WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + 4)
-+#define WLAN_A3FR_MAXLEN_WEP		(WLAN_A3FR_MAXLEN + 8)
-+#define WLAN_A4FR_MAXLEN_WEP		(WLAN_A4FR_MAXLEN + 8)
-+#define WLAN_A3FR_MAXLEN_WEP_FCS	(WLAN_A3FR_MAXLEN_FCS + 8)
-+#define WLAN_A4FR_MAXLEN_WEP_FCS	(WLAN_A4FR_MAXLEN_FCS + 8)
-+
-+#define WLAN_BSS_TS_LEN			8
-+#define WLAN_SSID_MAXLEN		32
-+#define WLAN_BEACON_FR_MAXLEN		(WLAN_HDR_A3_LEN + 334)
-+#define WLAN_ATIM_FR_MAXLEN		(WLAN_HDR_A3_LEN + 0)
-+#define WLAN_DISASSOC_FR_MAXLEN		(WLAN_HDR_A3_LEN + 2)
-+#define WLAN_ASSOCREQ_FR_MAXLEN		(WLAN_HDR_A3_LEN + 48)
-+#define WLAN_ASSOCRESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 16)
-+#define WLAN_REASSOCREQ_FR_MAXLEN	(WLAN_HDR_A3_LEN + 54)
-+#define WLAN_REASSOCRESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 16)
-+#define WLAN_PROBEREQ_FR_MAXLEN		(WLAN_HDR_A3_LEN + 44)
-+#define WLAN_PROBERESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 78)
-+#define WLAN_AUTHEN_FR_MAXLEN		(WLAN_HDR_A3_LEN + 261)
-+#define WLAN_DEAUTHEN_FR_MAXLEN		(WLAN_HDR_A3_LEN + 2)
-+#define WLAN_CHALLENGE_IE_LEN		130
-+#define WLAN_CHALLENGE_LEN		128
-+#define WLAN_WEP_MAXKEYLEN		13
-+#define WLAN_WEP_NKEYS			4
-+
-+/*--- Frame Control Field -------------------------------------*/
-+/* Frame Types */
-+#define WLAN_FTYPE_MGMT			0x00
-+#define WLAN_FTYPE_CTL			0x01
-+#define WLAN_FTYPE_DATA			0x02
-+
-+/* Frame subtypes */
-+/* Management */
-+#define WLAN_FSTYPE_ASSOCREQ		0x00
-+#define WLAN_FSTYPE_ASSOCRESP		0x01
-+#define WLAN_FSTYPE_REASSOCREQ		0x02
-+#define WLAN_FSTYPE_REASSOCRESP		0x03
-+#define WLAN_FSTYPE_PROBEREQ		0x04
-+#define WLAN_FSTYPE_PROBERESP		0x05
-+#define WLAN_FSTYPE_BEACON		0x08
-+#define WLAN_FSTYPE_ATIM		0x09
-+#define WLAN_FSTYPE_DISASSOC		0x0a
-+#define WLAN_FSTYPE_AUTHEN		0x0b
-+#define WLAN_FSTYPE_DEAUTHEN		0x0c
-+
-+/* Control */
-+#define WLAN_FSTYPE_PSPOLL		0x0a
-+#define WLAN_FSTYPE_RTS			0x0b
-+#define WLAN_FSTYPE_CTS			0x0c
-+#define WLAN_FSTYPE_ACK			0x0d
-+#define WLAN_FSTYPE_CFEND		0x0e
-+#define WLAN_FSTYPE_CFENDCFACK		0x0f
-+
-+/* Data */
-+#define WLAN_FSTYPE_DATAONLY		0x00
-+#define WLAN_FSTYPE_DATA_CFACK		0x01
-+#define WLAN_FSTYPE_DATA_CFPOLL		0x02
-+#define WLAN_FSTYPE_DATA_CFACK_CFPOLL	0x03
-+#define WLAN_FSTYPE_NULL		0x04
-+#define WLAN_FSTYPE_CFACK		0x05
-+#define WLAN_FSTYPE_CFPOLL		0x06
-+#define WLAN_FSTYPE_CFACK_CFPOLL	0x07
-+
-+/*--- FC Constants v. 2.0 ------------------------------------*/
-+/* Each constant is defined twice: WF_CONST is in host        */
-+/* byteorder, WF_CONSTi is in ieee byteorder.                 */
-+/* Usage:                                                     */
-+/* printf("the frame subtype is %X", WF_FC_FTYPEi & rx.fc);   */
-+/* tx.fc = WF_FTYPE_CTLi | WF_FSTYPE_RTSi;                    */
-+/*------------------------------------------------------------*/
-+
-+enum {
-+/*--- Frame Control Field -------------------------------------*/
-+/* Protocol version: always 0 for current 802.11 standards */
-+IEEE16(WF_FC_PVER,			0x0003)
-+IEEE16(WF_FC_FTYPE,			0x000c)
-+IEEE16(WF_FC_FSTYPE,			0x00f0)
-+IEEE16(WF_FC_TODS,			0x0100)
-+IEEE16(WF_FC_FROMDS,			0x0200)
-+IEEE16(WF_FC_FROMTODS,			0x0300)
-+IEEE16(WF_FC_MOREFRAG,			0x0400)
-+IEEE16(WF_FC_RETRY,			0x0800)
-+/* Indicates PS mode in which STA will be after successful completion
-+** of current frame exchange sequence. Always 0 for AP frames */
-+IEEE16(WF_FC_PWRMGT,			0x1000)
-+/* What MoreData=1 means:
-+** From AP to STA in PS mode: don't sleep yet, I have more frames for you
-+** From Contention-Free (CF) Pollable STA in response to a CF-Poll:
-+**   STA has buffered frames for transmission in response to next CF-Poll
-+** Bcast/mcast frames transmitted from AP:
-+**   when additional bcast/mcast frames remain to be transmitted by AP
-+**   during this beacon interval
-+** In all other cases MoreData=0 */
-+IEEE16(WF_FC_MOREDATA,			0x2000)
-+IEEE16(WF_FC_ISWEP,			0x4000)
-+IEEE16(WF_FC_ORDER,			0x8000)
-+
-+/* Frame Types */
-+IEEE16(WF_FTYPE_MGMT,			0x00)
-+IEEE16(WF_FTYPE_CTL,			0x04)
-+IEEE16(WF_FTYPE_DATA,			0x08)
-+
-+/* Frame subtypes */
-+/* Management */
-+IEEE16(WF_FSTYPE_ASSOCREQ,		0x00)
-+IEEE16(WF_FSTYPE_ASSOCRESP,		0x10)
-+IEEE16(WF_FSTYPE_REASSOCREQ,		0x20)
-+IEEE16(WF_FSTYPE_REASSOCRESP,		0x30)
-+IEEE16(WF_FSTYPE_PROBEREQ,		0x40)
-+IEEE16(WF_FSTYPE_PROBERESP,		0x50)
-+IEEE16(WF_FSTYPE_BEACON,		0x80)
-+IEEE16(WF_FSTYPE_ATIM,			0x90)
-+IEEE16(WF_FSTYPE_DISASSOC,		0xa0)
-+IEEE16(WF_FSTYPE_AUTHEN,		0xb0)
-+IEEE16(WF_FSTYPE_DEAUTHEN,		0xc0)
-+
-+/* Control */
-+IEEE16(WF_FSTYPE_PSPOLL,		0xa0)
-+IEEE16(WF_FSTYPE_RTS,			0xb0)
-+IEEE16(WF_FSTYPE_CTS,			0xc0)
-+IEEE16(WF_FSTYPE_ACK,			0xd0)
-+IEEE16(WF_FSTYPE_CFEND,			0xe0)
-+IEEE16(WF_FSTYPE_CFENDCFACK,		0xf0)
-+
-+/* Data */
-+IEEE16(WF_FSTYPE_DATAONLY,		0x00)
-+IEEE16(WF_FSTYPE_DATA_CFACK,		0x10)
-+IEEE16(WF_FSTYPE_DATA_CFPOLL,		0x20)
-+IEEE16(WF_FSTYPE_DATA_CFACK_CFPOLL,	0x30)
-+IEEE16(WF_FSTYPE_NULL,			0x40)
-+IEEE16(WF_FSTYPE_CFACK,			0x50)
-+IEEE16(WF_FSTYPE_CFPOLL,		0x60)
-+IEEE16(WF_FSTYPE_CFACK_CFPOLL,		0x70)
-+};
-+
-+
-+/***********************************************************************
-+** Macros
-+*/
-+
-+/*--- Duration Macros ----------------------------------------*/
-+/* Macros to get/set the bitfields of the Duration Field      */
-+/*  - the duration value is only valid when bit15 is zero     */
-+/*  - the firmware handles these values, so I'm not going     */
-+/*    to use these macros right now.                          */
-+/*------------------------------------------------------------*/
-+
-+/*--- Sequence Control  Macros -------------------------------*/
-+/* Macros to get/set the bitfields of the Sequence Control    */
-+/* Field.                                                     */
-+/*------------------------------------------------------------*/
-+#define WLAN_GET_SEQ_FRGNUM(n) ((u16)(n) & 0x000f)
-+#define WLAN_GET_SEQ_SEQNUM(n) (((u16)(n) & 0xfff0) >> 4)
-+
-+/*--- Data ptr macro -----------------------------------------*/
-+/* Creates a u8* to the data portion of a frame               */
-+/* Assumes you're passing in a ptr to the beginning of the hdr*/
-+/*------------------------------------------------------------*/
-+#define WLAN_HDR_A3_DATAP(p) (((u8*)(p)) + WLAN_HDR_A3_LEN)
-+#define WLAN_HDR_A4_DATAP(p) (((u8*)(p)) + WLAN_HDR_A4_LEN)
-+
-+
-+/***********************************************************************
-+** Types
-+*/
-+
-+/* 802.11 header type
-+**
-+** Note the following:
-+** a1 *always* is receiver's mac or bcast/mcast
-+** a2 *always* is transmitter's mac, if a2 exists
-+** seq: [0:3] frag#, [4:15] seq# - used for dup detection
-+** (dups from retries have same seq#) */
-+typedef struct wlan_hdr {
-+	u16	fc;
-+	u16	dur;
-+	u8	a1[ETH_ALEN];
-+	u8	a2[ETH_ALEN];
-+	u8	a3[ETH_ALEN];
-+	u16	seq;
-+	u8	a4[ETH_ALEN];
-+} WLAN_PACKED wlan_hdr_t;
-+
-+/* Separate structs for use if frame type is known */
-+typedef struct wlan_hdr_a3 {
-+	u16	fc;
-+	u16	dur;
-+	u8	a1[ETH_ALEN];
-+	u8	a2[ETH_ALEN];
-+	u8	a3[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED wlan_hdr_a3_t;
-+
-+typedef struct wlan_hdr_mgmt {
-+	u16	fc;
-+	u16	dur;
-+	u8	da[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED wlan_hdr_mgmt_t;
-+
-+#ifdef NOT_NEEDED_YET
-+typedef struct { /* ad-hoc peer->peer (to/from DS = 0/0) */
-+	u16	fc;
-+	u16	dur;
-+	u8	da[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED ibss;
-+typedef struct { /* ap->sta (to/from DS = 0/1) */
-+	u16	fc;
-+	u16	dur;
-+	u8	da[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED fromap;
-+typedef struct { /* sta->ap (to/from DS = 1/0) */
-+	u16	fc;
-+	u16	dur;
-+	u8	bssid[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u8	da[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED toap;
-+typedef struct { /* wds->wds (to/from DS = 1/1), the only 4addr pkt */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+	u8	ta[ETH_ALEN];
-+	u8	da[ETH_ALEN];
-+	u16	seq;
-+	u8	sa[ETH_ALEN];
-+} WLAN_PACKED wds;
-+typedef struct { /* all management packets */
-+	u16	fc;
-+	u16	dur;
-+	u8	da[ETH_ALEN];
-+	u8	sa[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+	u16	seq;
-+} WLAN_PACKED mgmt;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+	u8	ta[ETH_ALEN];
-+} WLAN_PACKED rts;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+} WLAN_PACKED cts;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+} WLAN_PACKED ack;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	/* NB: this one holds Assoc ID in dur field: */
-+	u16	aid;
-+	u8	bssid[ETH_ALEN];
-+	u8	ta[ETH_ALEN];
-+} WLAN_PACKED pspoll;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+} WLAN_PACKED cfend;
-+typedef struct { /* has no body, just a FCS */
-+	u16	fc;
-+	u16	dur;
-+	u8	ra[ETH_ALEN];
-+	u8	bssid[ETH_ALEN];
-+} WLAN_PACKED cfendcfack;
-+#endif
-+
-+/* Prism header emulation (monitor mode) */
-+typedef struct wlanitem_u32 {
-+	u32	did;
-+	u16	status;
-+	u16	len;
-+	u32	data;
-+} WLAN_PACKED wlanitem_u32_t;
-+#define WLANITEM_STATUS_data_ok			0
-+#define WLANITEM_STATUS_no_value		1
-+#define WLANITEM_STATUS_invalid_itemname	2
-+#define WLANITEM_STATUS_invalid_itemdata	3
-+#define WLANITEM_STATUS_missing_itemdata	4
-+#define WLANITEM_STATUS_incomplete_itemdata	5
-+#define WLANITEM_STATUS_invalid_msg_did		6
-+#define WLANITEM_STATUS_invalid_mib_did		7
-+#define WLANITEM_STATUS_missing_conv_func	8
-+#define WLANITEM_STATUS_string_too_long		9
-+#define WLANITEM_STATUS_data_out_of_range	10
-+#define WLANITEM_STATUS_string_too_short	11
-+#define WLANITEM_STATUS_missing_valid_func	12
-+#define WLANITEM_STATUS_unknown			13
-+#define WLANITEM_STATUS_invalid_did		14
-+#define WLANITEM_STATUS_missing_print_func	15
-+
-+#define WLAN_DEVNAMELEN_MAX	16
-+typedef struct wlansniffrm {
-+	u32		msgcode;
-+	u32		msglen;
-+	u8		devname[WLAN_DEVNAMELEN_MAX];
-+	wlanitem_u32_t	hosttime;
-+	wlanitem_u32_t	mactime;
-+	wlanitem_u32_t	channel;
-+	wlanitem_u32_t	rssi;
-+	wlanitem_u32_t	sq;
-+	wlanitem_u32_t	signal;
-+	wlanitem_u32_t	noise;
-+	wlanitem_u32_t	rate;
-+	wlanitem_u32_t	istx;	/* tx? 0:no 1:yes */
-+	wlanitem_u32_t	frmlen;
-+} WLAN_PACKED wlansniffrm_t;
-+#define WLANSNIFFFRM		0x0041
-+#define WLANSNIFFFRM_hosttime	0x1041
-+#define WLANSNIFFFRM_mactime	0x2041
-+#define WLANSNIFFFRM_channel	0x3041
-+#define WLANSNIFFFRM_rssi	0x4041
-+#define WLANSNIFFFRM_sq		0x5041
-+#define WLANSNIFFFRM_signal	0x6041
-+#define WLANSNIFFFRM_noise	0x7041
-+#define WLANSNIFFFRM_rate	0x8041
-+#define WLANSNIFFFRM_istx	0x9041
-+#define WLANSNIFFFRM_frmlen	0xA041
-Index: linux-2.6.23/drivers/net/wireless/acx/wlan_mgmt.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/acx/wlan_mgmt.h	2008-01-20 21:13:40.000000000 +0000
-@@ -0,0 +1,582 @@
-+/***********************************************************************
-+** Copyright (C) 2003  ACX100 Open Source Project
-+**
-+** The contents of this file are subject to the Mozilla Public
-+** License Version 1.1 (the "License"); you may not use this file
-+** except in compliance with the License. You may obtain a copy of
-+** the License at http://www.mozilla.org/MPL/
-+**
-+** Software distributed under the License is distributed on an "AS
-+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-+** implied. See the License for the specific language governing
-+** rights and limitations under the License.
-+**
-+** Alternatively, the contents of this file may be used under the
-+** terms of the GNU Public License version 2 (the "GPL"), in which
-+** case the provisions of the GPL are applicable instead of the
-+** above.  If you wish to allow the use of your version of this file
-+** only under the terms of the GPL and not to allow others to use
-+** your version of this file under the MPL, indicate your decision
-+** by deleting the provisions above and replace them with the notice
-+** and other provisions required by the GPL.  If you do not delete
-+** the provisions above, a recipient may use your version of this
-+** file under either the MPL or the GPL.
-+** ---------------------------------------------------------------------
-+** Inquiries regarding the ACX100 Open Source Project can be
-+** made directly to:
-+**
-+** acx100-users@lists.sf.net
-+** http://acx100.sf.net
-+** ---------------------------------------------------------------------
-+*/
-+
-+/***********************************************************************
-+** This code is based on elements which are
-+** Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-+** info@linux-wlan.com
-+** http://www.linux-wlan.com
-+*/
-+
-+/***********************************************************************
-+** Constants
-+*/
-+
-+/*-- Information Element IDs --------------------*/
-+#define WLAN_EID_SSID		0
-+#define WLAN_EID_SUPP_RATES	1
-+#define WLAN_EID_FH_PARMS	2
-+#define WLAN_EID_DS_PARMS	3
-+#define WLAN_EID_CF_PARMS	4
-+#define WLAN_EID_TIM		5
-+#define WLAN_EID_IBSS_PARMS	6
-+#define WLAN_EID_COUNTRY	7 /* 802.11d */
-+#define WLAN_EID_FH_HOP_PARMS	8 /* 802.11d */
-+#define WLAN_EID_FH_TABLE	9 /* 802.11d */
-+#define WLAN_EID_REQUEST	10 /* 802.11d */
-+/*-- values 11-15 reserved --*/
-+#define WLAN_EID_CHALLENGE	16
-+/*-- values 17-31 reserved for challenge text extension --*/
-+#define WLAN_EID_PWR_CONSTRAINT	32	/* 11h PowerConstraint */
-+#define WLAN_EID_ERP_INFO	42	/* was seen from WRT54GS with OpenWrt */
-+#define WLAN_EID_NONERP		47	/* was seen from WRT54GS with OpenWrt */
-+#define WLAN_EID_RSN		48
-+#define WLAN_EID_EXT_RATES	50
-+#define WLAN_EID_UNKNOWN128	128
-+#define WLAN_EID_UNKNOWN133	133
-+#define WLAN_EID_GENERIC	221	/* was seen from WRT54GS with OpenWrt */
-+#define WLAN_EID_UNKNOWN223	223
-+
-+#if 0
-+#define WLAN_EID_PWR_CAP		33	/* 11h PowerCapability */
-+#define WLAN_EID_TPC_REQUEST		34	/* 11h TPC Request */
-+#define WLAN_EID_TPC_REPORT		35	/* 11h TPC Report */
-+#define WLAN_EID_SUPP_CHANNELS		36	/* 11h Supported Channels */
-+#define WLAN_EID_CHANNEL_SWITCH		37	/* 11h ChannelSwitch */
-+#define WLAN_EID_MEASURE_REQUEST	38	/* 11h MeasurementRequest */
-+#define WLAN_EID_MEASURE_REPORT		39	/* 11h MeasurementReport */
-+#define WLAN_EID_QUIET_ID		40	/* 11h Quiet */
-+#define WLAN_EID_IBSS_DFS_ID		41	/* 11h IBSS_DFS */
-+#endif
-+
-+/*-- Reason Codes -------------------------------*/
-+#define WLAN_MGMT_REASON_RSVD			0
-+#define WLAN_MGMT_REASON_UNSPEC			1
-+#define WLAN_MGMT_REASON_PRIOR_AUTH_INVALID	2
-+#define WLAN_MGMT_REASON_DEAUTH_LEAVING		3
-+#define WLAN_MGMT_REASON_DISASSOC_INACTIVE	4
-+#define WLAN_MGMT_REASON_DISASSOC_AP_BUSY	5
-+#define WLAN_MGMT_REASON_CLASS2_NONAUTH		6
-+#define WLAN_MGMT_REASON_CLASS3_NONASSOC	7
-+#define WLAN_MGMT_REASON_DISASSOC_STA_HASLEFT	8
-+#define WLAN_MGMT_REASON_CANT_ASSOC_NONAUTH	9
-+
-+/*-- Status Codes -------------------------------*/
-+#define WLAN_MGMT_STATUS_SUCCESS		0
-+#define WLAN_MGMT_STATUS_UNSPEC_FAILURE		1
-+#define WLAN_MGMT_STATUS_CAPS_UNSUPPORTED	10
-+#define WLAN_MGMT_STATUS_REASSOC_NO_ASSOC	11
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_UNSPEC	12
-+#define WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG	13
-+#define WLAN_MGMT_STATUS_RX_AUTH_NOSEQ		14
-+#define WLAN_MGMT_STATUS_CHALLENGE_FAIL		15
-+#define WLAN_MGMT_STATUS_AUTH_TIMEOUT		16
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_BUSY	17
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_RATES	18
-+/* p80211b additions */
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOSHORT	19
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOPBCC	20
-+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOAGILITY	21
-+
-+/*-- Auth Algorithm Field ---------------------------*/
-+#define WLAN_AUTH_ALG_OPENSYSTEM		0
-+#define WLAN_AUTH_ALG_SHAREDKEY			1
-+
-+/*-- Management Frame Field Offsets -------------*/
-+/* Note: Not all fields are listed because of variable lengths */
-+/* Note: These offsets are from the start of the frame data */
-+
-+#define WLAN_BEACON_OFF_TS			0
-+#define WLAN_BEACON_OFF_BCN_INT			8
-+#define WLAN_BEACON_OFF_CAPINFO			10
-+#define WLAN_BEACON_OFF_SSID			12
-+
-+#define WLAN_DISASSOC_OFF_REASON		0
-+
-+#define WLAN_ASSOCREQ_OFF_CAP_INFO		0
-+#define WLAN_ASSOCREQ_OFF_LISTEN_INT		2
-+#define WLAN_ASSOCREQ_OFF_SSID			4
-+
-+#define WLAN_ASSOCRESP_OFF_CAP_INFO		0
-+#define WLAN_ASSOCRESP_OFF_STATUS		2
-+#define WLAN_ASSOCRESP_OFF_AID			4
-+#define WLAN_ASSOCRESP_OFF_SUPP_RATES		6
-+
-+#define WLAN_REASSOCREQ_OFF_CAP_INFO		0
-+#define WLAN_REASSOCREQ_OFF_LISTEN_INT		2
-+#define WLAN_REASSOCREQ_OFF_CURR_AP		4
-+#define WLAN_REASSOCREQ_OFF_SSID		10
-+
-+#define WLAN_REASSOCRESP_OFF_CAP_INFO		0
-+#define WLAN_REASSOCRESP_OFF_STATUS		2
-+#define WLAN_REASSOCRESP_OFF_AID		4
-+#define WLAN_REASSOCRESP_OFF_SUPP_RATES		6
-+
-+#define WLAN_PROBEREQ_OFF_SSID			0
-+
-+#define WLAN_PROBERESP_OFF_TS			0
-+#define WLAN_PROBERESP_OFF_BCN_INT		8
-+#define WLAN_PROBERESP_OFF_CAP_INFO		10
-+#define WLAN_PROBERESP_OFF_SSID			12
-+
-+#define WLAN_AUTHEN_OFF_AUTH_ALG		0
-+#define WLAN_AUTHEN_OFF_AUTH_SEQ		2
-+#define WLAN_AUTHEN_OFF_STATUS			4
-+#define WLAN_AUTHEN_OFF_CHALLENGE		6
-+
-+#define WLAN_DEAUTHEN_OFF_REASON		0
-+
-+enum {
-+IEEE16(WF_MGMT_CAP_ESS,		0x0001)
-+IEEE16(WF_MGMT_CAP_IBSS,	0x0002)
-+/* In (re)assoc request frames by STA:
-+** Pollable=0, PollReq=0: STA is not CF-Pollable
-+** 0 1: STA is CF-Pollable, not requesting to be placed on the CF-Polling list
-+** 1 0: STA is CF-Pollable, requesting to be placed on the CF-Polling list
-+** 1 1: STA is CF-Pollable, requesting never to be polled
-+** In beacon, proberesp, (re)assoc resp frames by AP:
-+** 0 0: No point coordinator at AP
-+** 0 1: Point coordinator at AP for delivery only (no polling)
-+** 1 0: Point coordinator at AP for delivery and polling
-+** 1 1: Reserved  */
-+IEEE16(WF_MGMT_CAP_CFPOLLABLE,	0x0004)
-+IEEE16(WF_MGMT_CAP_CFPOLLREQ,	0x0008)
-+/* 1=non-WEP data frames are disallowed */
-+IEEE16(WF_MGMT_CAP_PRIVACY,	0x0010)
-+/* In beacon,  proberesp, (re)assocresp by AP/AdHoc:
-+** 1=use of shortpre is allowed ("I can receive shortpre") */
-+IEEE16(WF_MGMT_CAP_SHORT,	0x0020)
-+IEEE16(WF_MGMT_CAP_PBCC,	0x0040)
-+IEEE16(WF_MGMT_CAP_AGILITY,	0x0080)
-+/* In (re)assoc request frames by STA:
-+** 1=short slot time implemented and enabled
-+**   NB: AP shall use long slot time beginning at the next Beacon after assoc
-+**   of STA with this bit set to 0
-+** In beacon, proberesp, (re)assoc resp frames by AP:
-+** currently used slot time value: 0/1 - long/short */
-+IEEE16(WF_MGMT_CAP_SHORTSLOT,	0x0400)
-+/* In (re)assoc request frames by STA: 1=CCK-OFDM is implemented and enabled
-+** In beacon, proberesp, (re)assoc resp frames by AP/AdHoc:
-+** 1=CCK-OFDM is allowed */
-+IEEE16(WF_MGMT_CAP_CCKOFDM,	0x2000)
-+};
-+
-+
-+/***********************************************************************
-+** Types
-+*/
-+
-+/* Information Element types */
-+
-+/* prototype structure, all IEs start with these members */
-+typedef struct wlan_ie {
-+	u8 eid;
-+	u8 len;
-+} WLAN_PACKED wlan_ie_t;
-+
-+/*-- Service Set Identity (SSID)  -----------------*/
-+typedef struct wlan_ie_ssid {
-+	u8 eid;
-+	u8 len;
-+	u8 ssid[1];	/* may be zero */
-+} WLAN_PACKED wlan_ie_ssid_t;
-+
-+/*-- Supported Rates  -----------------------------*/
-+typedef struct wlan_ie_supp_rates {
-+	u8 eid;
-+	u8 len;
-+	u8 rates[1];	/* had better be at LEAST one! */
-+} WLAN_PACKED wlan_ie_supp_rates_t;
-+
-+/*-- FH Parameter Set  ----------------------------*/
-+typedef struct wlan_ie_fh_parms {
-+	u8 eid;
-+	u8 len;
-+	u16 dwell;
-+	u8 hopset;
-+	u8 hoppattern;
-+	u8 hopindex;
-+} WLAN_PACKED wlan_ie_fh_parms_t;
-+
-+/*-- DS Parameter Set  ----------------------------*/
-+typedef struct wlan_ie_ds_parms {
-+	u8 eid;
-+	u8 len;
-+	u8 curr_ch;
-+} WLAN_PACKED wlan_ie_ds_parms_t;
-+
-+/*-- CF Parameter Set  ----------------------------*/
-+typedef struct wlan_ie_cf_parms {
-+	u8 eid;
-+	u8 len;
-+	u8 cfp_cnt;
-+	u8 cfp_period;
-+	u16 cfp_maxdur;
-+	u16 cfp_durremaining;
-+} WLAN_PACKED wlan_ie_cf_parms_t;
-+
-+/*-- TIM ------------------------------------------*/
-+typedef struct wlan_ie_tim {
-+	u8 eid;
-+	u8 len;
-+	u8 dtim_cnt;
-+	u8 dtim_period;
-+	u8 bitmap_ctl;
-+	u8 virt_bm[1];
-+} WLAN_PACKED wlan_ie_tim_t;
-+
-+/*-- IBSS Parameter Set ---------------------------*/
-+typedef struct wlan_ie_ibss_parms {
-+	u8 eid;
-+	u8 len;
-+	u16 atim_win;
-+} WLAN_PACKED wlan_ie_ibss_parms_t;
-+
-+/*-- Challenge Text  ------------------------------*/
-+typedef struct wlan_ie_challenge {
-+	u8 eid;
-+	u8 len;
-+	u8 challenge[1];
-+} WLAN_PACKED wlan_ie_challenge_t;
-+
-+/*-- ERP (42) -------------------------------------*/
-+typedef struct wlan_ie_erp {
-+	u8 eid;
-+	u8 len;
-+	/* bit 0:Non ERP present
-+	**     1:Use Protection
-+	**     2:Barker Preamble mode
-+	**     3-7:reserved */
-+	u8 erp;
-+} WLAN_PACKED wlan_ie_erp_t;
-+
-+/* Types for parsing mgmt frames */
-+
-+/* prototype structure, all mgmt frame types will start with these members */
-+typedef struct wlan_fr_mgmt {
-+	u16 type;
-+	u16 len;		/* DOES NOT include FCS */
-+	wlan_hdr_t *hdr;
-+	/* used for target specific data, skb in Linux */
-+	/*-- fixed fields -----------*/
-+	/*-- info elements ----------*/
-+} WLAN_PACKED wlan_fr_mgmt_t;
-+
-+/*-- Beacon ---------------------------------------*/
-+typedef struct wlan_fr_beacon {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u64 *ts;
-+	u16 *bcn_int;
-+	u16 *cap_info;
-+	/*-- info elements ----------*/
-+	wlan_ie_ssid_t *ssid;
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+	wlan_ie_fh_parms_t *fh_parms;
-+	wlan_ie_ds_parms_t *ds_parms;
-+	wlan_ie_cf_parms_t *cf_parms;
-+	wlan_ie_ibss_parms_t *ibss_parms;
-+	wlan_ie_tim_t *tim;	/* in beacon only, not proberesp */
-+	wlan_ie_erp_t *erp;	/* in beacon only, not proberesp */
-+} wlan_fr_beacon_t;
-+#define wlan_fr_proberesp wlan_fr_beacon
-+#define wlan_fr_proberesp_t wlan_fr_beacon_t
-+
-+/*-- IBSS ATIM ------------------------------------*/
-+typedef struct wlan_fr_ibssatim {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	/*-- info elements ----------*/
-+	/* this frame type has a null body */
-+} wlan_fr_ibssatim_t;
-+
-+/*-- Disassociation -------------------------------*/
-+typedef struct wlan_fr_disassoc {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *reason;
-+	/*-- info elements ----------*/
-+} wlan_fr_disassoc_t;
-+
-+/*-- Association Request --------------------------*/
-+typedef struct wlan_fr_assocreq {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *cap_info;
-+	u16 *listen_int;
-+	/*-- info elements ----------*/
-+	wlan_ie_ssid_t *ssid;
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_assocreq_t;
-+
-+/*-- Association Response -------------------------*/
-+typedef struct wlan_fr_assocresp {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *cap_info;
-+	u16 *status;
-+	u16 *aid;
-+	/*-- info elements ----------*/
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_assocresp_t;
-+
-+/*-- Reassociation Request ------------------------*/
-+typedef struct wlan_fr_reassocreq {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *cap_info;
-+	u16 *listen_int;
-+	u8 *curr_ap;
-+	/*-- info elements ----------*/
-+	wlan_ie_ssid_t *ssid;
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_reassocreq_t;
-+
-+/*-- Reassociation Response -----------------------*/
-+typedef struct wlan_fr_reassocresp {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *cap_info;
-+	u16 *status;
-+	u16 *aid;
-+	/*-- info elements ----------*/
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_reassocresp_t;
-+
-+/*-- Probe Request --------------------------------*/
-+typedef struct wlan_fr_probereq {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	/*-- info elements ----------*/
-+	wlan_ie_ssid_t *ssid;
-+	wlan_ie_supp_rates_t *supp_rates;
-+	wlan_ie_supp_rates_t *ext_rates;
-+} wlan_fr_probereq_t;
-+
-+/*-- Authentication -------------------------------*/
-+typedef struct wlan_fr_authen {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *auth_alg;
-+	u16 *auth_seq;
-+	u16 *status;
-+	/*-- info elements ----------*/
-+	wlan_ie_challenge_t *challenge;
-+} wlan_fr_authen_t;
-+
-+/*-- Deauthenication -----------------------------*/
-+typedef struct wlan_fr_deauthen {
-+	u16 type;
-+	u16 len;
-+	wlan_hdr_t *hdr;
-+	/*-- fixed fields -----------*/
-+	u16 *reason;
-+	/*-- info elements ----------*/
-+} wlan_fr_deauthen_t;
-+
-+/* Types for building mgmt frames */
-+
-+/* Warning. Several types used in below structs are
-+** in fact variable length. Use structs with such fields with caution */
-+typedef struct auth_frame_body {
-+	u16	auth_alg;
-+	u16	auth_seq;
-+	u16	status;
-+	wlan_ie_challenge_t challenge;
-+} WLAN_PACKED auth_frame_body_t;
-+
-+typedef struct assocresp_frame_body {
-+	u16	cap_info;
-+	u16	status;
-+	u16	aid;
-+	wlan_ie_supp_rates_t rates;
-+} WLAN_PACKED assocresp_frame_body_t;
-+
-+typedef struct reassocreq_frame_body {
-+	u16	cap_info;
-+	u16	listen_int;
-+	u8	current_ap[ETH_ALEN];
-+	wlan_ie_ssid_t ssid;
-+/* access to this one is disabled since ssid_t is variable length: */
-+     /* wlan_ie_supp_rates_t rates; */
-+} WLAN_PACKED reassocreq_frame_body_t;
-+
-+typedef struct reassocresp_frame_body {
-+	u16	cap_info;
-+	u16	status;
-+	u16	aid;
-+	wlan_ie_supp_rates_t rates;
-+} WLAN_PACKED reassocresp_frame_body_t;
-+
-+typedef struct deauthen_frame_body {
-+	u16	reason;
-+} WLAN_PACKED deauthen_frame_body_t;
-+
-+typedef struct disassoc_frame_body {
-+	u16	reason;
-+} WLAN_PACKED disassoc_frame_body_t;
-+
-+typedef struct probereq_frame_body {
-+	wlan_ie_ssid_t ssid;
-+	wlan_ie_supp_rates_t rates;
-+} WLAN_PACKED probereq_frame_body_t;
-+
-+typedef struct proberesp_frame_body {
-+	u8	timestamp[8];
-+	u16	beacon_int;
-+	u16	cap_info;
-+	wlan_ie_ssid_t ssid;
-+/* access to these is disabled since ssid_t is variable length: */
-+     /* wlan_ie_supp_rates_t rates; */
-+     /* fhps_t	fhps; */
-+     /* dsps_t	dsps; */
-+     /* cfps_t	cfps; */
-+} WLAN_PACKED proberesp_frame_body_t;
-+
-+
-+/***********************************************************************
-+** Functions
-+*/
-+
-+/* Helpers for parsing mgmt frames */
-+void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t *f);
-+void wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t *f);
-+void wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t *f);
-+void wlan_mgmt_decode_authen(wlan_fr_authen_t *f);
-+void wlan_mgmt_decode_beacon(wlan_fr_beacon_t *f);
-+void wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t *f);
-+void wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t *f);
-+void wlan_mgmt_decode_probereq(wlan_fr_probereq_t *f);
-+void wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t *f);
-+void wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t *f);
-+void wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t *f);
-+
-+/* Helpers for building mgmt frames */
-+static inline u8*
-+wlan_fill_ie_ssid(u8 *p, int len, const char *ssid)
-+{
-+	struct wlan_ie_ssid *ie = (void*)p;
-+	ie->eid = WLAN_EID_SSID;
-+	ie->len = len;
-+	memcpy(ie->ssid, ssid, len);
-+	return p + len + 2;
-+}
-+/* This controls whether we create 802.11g 'ext supported rates' IEs
-+** or just create overlong 'supported rates' IEs instead
-+** (non-11g compliant) */
-+#define WE_OBEY_802_11G 1
-+static inline u8*
-+wlan_fill_ie_rates(u8 *p, int len, const u8 *rates)
-+{
-+	struct wlan_ie_supp_rates *ie = (void*)p;
-+#if WE_OBEY_802_11G
-+	if (len > 8 ) len = 8;
-+#endif
-+	/* supported rates (1 to 8 octets) */
-+	ie->eid = WLAN_EID_SUPP_RATES;
-+	ie->len = len;
-+	memcpy(ie->rates, rates, len);
-+	return p + len + 2;
-+}
-+/* This one wouldn't create an IE at all if not needed */
-+static inline u8*
-+wlan_fill_ie_rates_ext(u8 *p, int len, const u8 *rates)
-+{
-+	struct wlan_ie_supp_rates *ie = (void*)p;
-+#if !WE_OBEY_802_11G
-+	return p;
-+#endif
-+	len -= 8;
-+	if (len <= 0) return p;
-+	/* ext supported rates */
-+	ie->eid = WLAN_EID_EXT_RATES;
-+	ie->len = len;
-+	memcpy(ie->rates, rates+8, len);
-+	return p + len + 2;
-+}
-+static inline u8*
-+wlan_fill_ie_ds_parms(u8 *p, int channel)
-+{
-+	struct wlan_ie_ds_parms *ie = (void*)p;
-+	ie->eid = WLAN_EID_DS_PARMS;
-+	ie->len = 1;
-+	ie->curr_ch = channel;
-+	return p + sizeof(*ie);
-+}
-+static inline u8*
-+wlan_fill_ie_ibss_parms(u8 *p, int atim_win)
-+{
-+	struct wlan_ie_ibss_parms *ie = (void*)p;
-+	ie->eid = WLAN_EID_IBSS_PARMS;
-+	ie->len = 2;
-+	ie->atim_win = atim_win;
-+	return p + sizeof(*ie);
-+}
-+static inline u8*
-+wlan_fill_ie_tim(u8 *p,	int rem, int period, int bcast,
-+		int ofs, int len, const u8 *vbm)
-+{
-+	struct wlan_ie_tim *ie = (void*)p;
-+	ie->eid = WLAN_EID_TIM;
-+	ie->len = len + 3;
-+	ie->dtim_cnt = rem;
-+	ie->dtim_period = period;
-+	ie->bitmap_ctl = ofs | (bcast!=0);
-+	if (vbm)
-+		memcpy(ie->virt_bm, vbm, len); /* min 1 byte */
-+	else
-+		ie->virt_bm[0] = 0;
-+	return p + len + 3 + 2;
-+}
-Index: linux-2.6.23/drivers/net/wireless/Kconfig
-===================================================================
---- linux-2.6.23.orig/drivers/net/wireless/Kconfig	2008-01-20 21:13:17.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/Kconfig	2008-01-20 21:15:12.000000000 +0000
-@@ -5,6 +5,36 @@
- menu "Wireless LAN"
- 	depends on !S390
- 
-+config NET_RADIO
-+	bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
-+	select WIRELESS_EXT
-+	---help---
-+	  Support for wireless LANs and everything having to do with radio,
-+	  but not with amateur radio or FM broadcasting.
-+
-+	  Saying Y here also enables the Wireless Extensions (creates
-+	  /proc/net/wireless and enables iwconfig access). The Wireless
-+	  Extension is a generic API allowing a driver to expose to the user
-+	  space configuration and statistics specific to common Wireless LANs.
-+	  The beauty of it is that a single set of tool can support all the
-+	  variations of Wireless LANs, regardless of their type (as long as
-+	  the driver supports Wireless Extension). Another advantage is that
-+	  these parameters may be changed on the fly without restarting the
-+	  driver (or Linux). If you wish to use Wireless Extensions with
-+	  wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
-+	  the tools from
-+	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-+
-+config NET_WIRELESS_RTNETLINK
-+	bool "Wireless Extension API over RtNetlink"
-+	depends on NET_RADIO
-+	---help---
-+	  Support the Wireless Extension API over the RtNetlink socket
-+	  in addition to the traditional ioctl interface (selected above).
-+
-+	  For now, few tools use this facility, but it might grow in the
-+	  future. The only downside is that it adds 4.5 kB to your kernel.
-+
- config WLAN_PRE80211
- 	bool "Wireless LAN (pre-802.11)"
- 	depends on NETDEVICES
-@@ -650,6 +680,7 @@ config P54_PCI
- 
- source "drivers/net/wireless/iwlwifi/Kconfig"
- source "drivers/net/wireless/hostap/Kconfig"
-+source "drivers/net/wireless/acx/Kconfig"
- source "drivers/net/wireless/bcm43xx/Kconfig"
- source "drivers/net/wireless/b43/Kconfig"
- source "drivers/net/wireless/b43legacy/Kconfig"
-Index: linux-2.6.23/drivers/net/wireless/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/net/wireless/Makefile	2008-01-20 21:13:17.000000000 +0000
-+++ linux-2.6.23/drivers/net/wireless/Makefile	2008-01-20 21:13:40.000000000 +0000
-@@ -34,6 +34,8 @@ obj-$(CONFIG_PCMCIA_ATMEL)      += atmel
- 
- obj-$(CONFIG_PRISM54)		+= prism54/
- 
-+obj-$(CONFIG_ACX)		+= acx/
-+
- obj-$(CONFIG_HOSTAP)		+= hostap/
- obj-$(CONFIG_BCM43XX)		+= bcm43xx/
- obj-$(CONFIG_B43)		+= b43/
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/htcuni.patch b/packages/kexecboot/linux-kexecboot-2.6.26/htcuni.patch
deleted file mode 100644
index 783f55b064..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/htcuni.patch
+++ /dev/null
@@ -1,7899 +0,0 @@
----
- arch/arm/Kconfig                                         |    2 
- arch/arm/mach-pxa/Kconfig                                |   89 +
- arch/arm/mach-pxa/Makefile                               |    1 
- arch/arm/mach-pxa/generic.c                              |   13 
- arch/arm/mach-pxa/htcuniversal/Makefile                  |   19 
- arch/arm/mach-pxa/htcuniversal/htcuniversal.c            |  468 +++++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c     |  917 +++++++++++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h     |   65 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c |  143 +
- arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c         |   61 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c         |  135 +
- arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h         |   17 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c    |   87 +
- arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c       |  226 ++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c        |  212 ++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c      |  167 ++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h      |   16 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c         |   69 
- arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c     |   97 +
- arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c        |  490 ++++++
- arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c        |   71 
- arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h              |   20 
- drivers/input/keyboard/Kconfig                           |    7 
- drivers/input/keyboard/Makefile                          |    1 
- drivers/input/keyboard/asic3_keys.c                      |  131 +
- drivers/leds/Kconfig                                     |    7 
- drivers/leds/Makefile                                    |    1 
- drivers/leds/leds-asic3.c                                |  189 ++
- drivers/mfd/Kconfig                                      |   10 
- drivers/mfd/Makefile                                     |    2 
- drivers/mfd/asic3_base.c                                 | 1208 +++++++++++++++
- drivers/mfd/soc-core.c                                   |  106 +
- drivers/mfd/soc-core.h                                   |   30 
- drivers/mmc/host/Kconfig                                 |    6 
- drivers/mmc/host/Makefile                                |    1 
- drivers/mmc/host/asic3_mmc.c                             |  900 +++++++++++
- drivers/mmc/host/asic3_mmc.h                             |   25 
- drivers/serial/pxa.c                                     |   22 
- include/asm-arm/arch-pxa/clock.h                         |   27 
- include/asm-arm/arch-pxa/htcuniversal-asic.h             |  213 ++
- include/asm-arm/arch-pxa/htcuniversal-gpio.h             |  220 ++
- include/asm-arm/arch-pxa/htcuniversal-init.h             |   14 
- include/asm-arm/arch-pxa/htcuniversal.h                  |    3 
- include/asm-arm/arch-pxa/irqs.h                          |    2 
- include/asm-arm/arch-pxa/pxa-pm_ll.h                     |    6 
- include/asm-arm/arch-pxa/pxa-regs.h                      |    2 
- include/asm-arm/arch-pxa/serial.h                        |   78 
- include/asm-arm/hardware/asic3_keys.h                    |   18 
- include/asm-arm/hardware/asic3_leds.h                    |   34 
- include/asm-arm/hardware/ipaq-asic3.h                    |  602 +++++++
- include/linux/backlight.h                                |    7 
- include/linux/gpiodev.h                                  |   44 
- include/linux/input_pda.h                                |   47 
- include/linux/ioport.h                                   |    1 
- include/linux/soc/asic3_base.h                           |  104 +
- include/linux/soc/tmio_mmc.h                             |   17 
- 56 files changed, 7469 insertions(+), 1 deletion(-)
-
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/Makefile
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/Makefile	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,19 @@
-+#
-+# Makefile for HTC Universal
-+#
-+
-+snd-htcuniversal-ak4641-objs := htcuniversal_ak4641.o
-+
-+obj-$(CONFIG_MACH_HTCUNIVERSAL)		+= htcuniversal.o
-+obj-$(CONFIG_HTCUNIVERSAL_CORE)		+= htcuniversal_core.o
-+obj-$(CONFIG_HTCUNIVERSAL_POWER)	+= htcuniversal_power2.o
-+obj-$(CONFIG_HTCUNIVERSAL_LCD)		+= htcuniversal_lcd.o
-+obj-$(CONFIG_HTCUNIVERSAL_BACKLIGHT)	+= htcuniversal_bl.o
-+obj-$(CONFIG_HTCUNIVERSAL_TS2)		+= htcuniversal_ts2.o
-+obj-$(CONFIG_HTCUNIVERSAL_BUTTONS) 	+= htcuniversal_buttons.o
-+obj-$(CONFIG_HTCUNIVERSAL_BLUETOOTH)	+= htcuniversal_bt.o
-+obj-$(CONFIG_HTCUNIVERSAL_PHONE)	+= htcuniversal_phone.o
-+obj-$(CONFIG_HTCUNIVERSAL_ASIC3_LEDS)	+= htcuniversal_asic3_leds.o
-+obj-$(CONFIG_HTCUNIVERSAL_UDC)		+= htcuniversal_udc.o
-+
-+obj-$(CONFIG_HTCUNIVERSAL_AK4641)	+= htcuniversal_ak4641.o
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,468 @@
-+/*
-+ * Hardware definitions for HTC Universal
-+ *
-+ * Copyright (c) 2006 Oleg Gusev
-+ *
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/input.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+
-+#include <asm/mach/irq.h>
-+#include <asm/mach/arch.h>
-+
-+#include <asm/arch/bitfield.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/serial.h>
-+#include <asm/arch/pxa27x_keyboard.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/irda.h>
-+#include <asm/arch/ohci.h>
-+
-+#include <asm/arch/htcuniversal.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-init.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+
-+#include "../generic.h"
-+
-+#include "htcuniversal_bt.h"
-+#include "htcuniversal_phone.h"
-+#include "tsc2046_ts.h"
-+
-+/*
-+ * IRDA
-+ */
-+
-+static void htcuniversal_irda_transceiver_mode(struct device *dev, int mode)
-+{
-+ /* */
-+}
-+
-+static struct pxaficp_platform_data htcuniversal_ficp_platform_data = {
-+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE,
-+	.transceiver_mode = htcuniversal_irda_transceiver_mode,
-+};
-+
-+/*
-+ * Bluetooth - Relies on other loadable modules, like ASIC3 and Core,
-+ * so make the calls indirectly through pointers. Requires that the
-+ * htcuniversal_bt module be loaded before any attempt to use
-+ * bluetooth (obviously).
-+ */
-+
-+static struct htcuniversal_bt_funcs bt_funcs;
-+
-+static void
-+htcuniversal_bt_configure( int state )
-+{
-+	if (bt_funcs.configure != NULL)
-+		bt_funcs.configure( state );
-+}
-+
-+static struct htcuniversal_phone_funcs phone_funcs;
-+
-+static void
-+htcuniversal_phone_configure( int state )
-+{
-+	if (phone_funcs.configure != NULL)
-+		phone_funcs.configure( state );
-+}
-+
-+//void htcuniversal_ll_pm_init(void);
-+
-+extern struct platform_device htcuniversal_bl;
-+static struct platform_device htcuniversal_lcd       = { .name = "htcuniversal_lcd", };
-+//static struct platform_device htcuniversal_kbd       = { .name = "htcuniversal_kbd", };
-+static struct platform_device htcuniversal_buttons   = { .name = "htcuniversal_buttons", };
-+//static struct platform_device htcuniversal_ts        = { .name = "htcuniversal_ts", };
-+//static struct platform_device htcuniversal_bt        = { .name = "htcuniversal_bt", };
-+//static struct platform_device htcuniversal_phone        = { .name = "htcuniversal_phone", };
-+static struct platform_device htcuniversal_power        = { .name = "htcuniversal_power", };
-+static struct platform_device htcuniversal_udc       = { .name = "htcuniversal_udc", };
-+
-+static struct tsc2046_mach_info htcuniversal_ts_platform_data = {
-+       .port     = 1,
-+       .clock    = CKEN_SSP1,
-+       .pwrbit_X = 1,
-+       .pwrbit_Y = 1,
-+       .irq	 = 0  /* asic3 irq */
-+};
-+
-+static struct platform_device htcuniversal_ts        = {
-+       .name = "htcuniversal_ts",
-+       .dev  = {
-+              .platform_data = &htcuniversal_ts_platform_data,
-+       },
-+};
-+
-+
-+/* Bluetooth */
-+
-+static struct platform_device htcuniversal_bt = {
-+	.name = "htcuniversal_bt",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &bt_funcs,
-+	},
-+};
-+
-+static struct platform_device htcuniversal_phone = {
-+	.name = "htcuniversal_phone",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &phone_funcs,
-+	},
-+};
-+
-+/* PXA2xx Keys */
-+
-+static struct gpio_keys_button htcuniversal_button_table[] = {
-+	{ KEY_POWER, GPIO_NR_HTCUNIVERSAL_KEY_ON_N, 1 },
-+};
-+
-+static struct gpio_keys_platform_data htcuniversal_pxa_keys_data = {
-+	.buttons = htcuniversal_button_table,
-+	.nbuttons = ARRAY_SIZE(htcuniversal_button_table),
-+};
-+
-+static struct platform_device htcuniversal_pxa_keys = {
-+	.name = "gpio-keys",
-+	.dev = {
-+		.platform_data = &htcuniversal_pxa_keys_data,
-+	},
-+	.id = -1,
-+};
-+
-+/****************************************************************
-+ * Keyboard
-+ ****************************************************************/
-+
-+static struct pxa27x_keyboard_platform_data htcuniversal_kbd = {
-+	.nr_rows = 8,
-+	.nr_cols = 8,
-+	.keycodes = {
-+		{
-+			/* row 0 */
-+			KEY_ENTER,
-+			KEY_MINUS,
-+			KEY_ESC,
-+			KEY_1,
-+			KEY_TAB,
-+			KEY_CAPSLOCK,
-+			KEY_LEFTSHIFT,
-+			KEY_RIGHTALT,	/* Fn */
-+		}, {	/* row 1 */
-+			KEY_COMMA,
-+			KEY_EQUAL,
-+			KEY_F1,
-+			KEY_2,
-+			KEY_Q,
-+			KEY_A,
-+			KEY_Z,
-+			KEY_LEFTCTRL,
-+		}, {	/* row 2 */
-+			KEY_UP,
-+			KEY_I,
-+			KEY_F2,
-+			KEY_3,
-+			KEY_W,
-+			KEY_S,
-+			KEY_X,
-+			KEY_F6,
-+		}, {	/* row 3 */
-+			KEY_DOT,
-+			KEY_O,
-+			KEY_F3,
-+			KEY_4,
-+			KEY_E,
-+			KEY_D,
-+			KEY_C,
-+			KEY_LEFTALT,
-+		}, {	/* row 4 */
-+			KEY_F9,
-+			KEY_P,
-+			KEY_F4,
-+			KEY_5,
-+			KEY_R,
-+			KEY_F,
-+			KEY_V,
-+			KEY_SPACE,
-+		}, {	/* row 5 */
-+			KEY_RIGHT,
-+			KEY_BACKSPACE,
-+			KEY_F5,
-+			KEY_6,
-+			KEY_T,
-+			KEY_G,
-+			KEY_B,
-+			KEY_F7,
-+		}, {	/* row 6 */
-+			KEY_F9,
-+			KEY_K,
-+			KEY_9,
-+			KEY_7,
-+			KEY_Y,
-+			KEY_H,
-+			KEY_N,
-+			KEY_LEFT,
-+		}, {	/* row 7 */
-+			KEY_F10,
-+			KEY_L,
-+			KEY_0,
-+			KEY_8,
-+			KEY_U,
-+			KEY_J,
-+			KEY_M,
-+			KEY_DOWN,
-+		},
-+	},
-+	.gpio_modes = {
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD,
-+		 GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD,
-+	 },
-+};
-+
-+static struct platform_device htcuniversal_pxa_keyboard = {
-+        .name   = "pxa27x-keyboard",
-+        .id     = -1,
-+	.dev	=  {
-+		.platform_data	= &htcuniversal_kbd,
-+	},
-+};
-+/* Core Hardware Functions */
-+
-+struct platform_device htcuniversal_core = {
-+	.name		= "htcuniversal_core",
-+	.id		= 0,
-+	.dev = {
-+		.platform_data = NULL,
-+	},
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+	&htcuniversal_core,
-+//	&htcuniversal_flash,
-+	&htcuniversal_pxa_keyboard,
-+	&htcuniversal_pxa_keys,
-+};
-+
-+static struct platform_device *htcuniversal_asic3_devices[] __initdata = {
-+	&htcuniversal_lcd,
-+#ifdef CONFIG_HTCUNIVERSAL_BACKLIGHT
-+	&htcuniversal_bl,
-+#endif
-+	&htcuniversal_buttons,
-+	&htcuniversal_ts,
-+	&htcuniversal_bt,
-+	&htcuniversal_phone,
-+	&htcuniversal_power,
-+	&htcuniversal_udc,
-+};
-+
-+static struct asic3_platform_data htcuniversal_asic3_platform_data = {
-+
-+   /* Setting ASIC3 GPIO registers to the below initialization states
-+    * HTC Universal asic3 information:
-+    * http://wiki.xda-developers.com/index.php?pagename=UniversalASIC3
-+    * http://wiki.xda-developers.com/index.php?pagename=ASIC3
-+    *
-+    * dir:	Direction of the GPIO pin. 0: input, 1: output.
-+    *      	If unknown, set as output to avoid power consuming floating input nodes
-+    * init:	Initial state of the GPIO bits
-+    *
-+    * These registers are configured as they are on Wince.
-+    */
-+        .gpio_a = {
-+		.dir            = (1<<GPIOA_LCD_PWR5_ON)    |
-+				  (1<<GPIOA_FLASHLIGHT)     |
-+				  (1<<GPIOA_UNKNOWN9)       |
-+				  (1<<GPIOA_SPK_PWR2_ON)    |
-+				  (1<<GPIOA_UNKNOWN4)       |
-+				  (1<<GPIOA_EARPHONE_PWR_ON)|
-+				  (1<<GPIOA_AUDIO_PWR_ON)   |
-+				  (1<<GPIOA_SPK_PWR1_ON)    |
-+				  (1<<GPIOA_I2C_EN),
-+		.init           = (1<<GPIOA_LCD_PWR5_ON)    |
-+				  (1<<GPIOA_I2C_EN),
-+		.sleep_out      = 0x0000,
-+		.batt_fault_out = 0x0000,
-+		.alt_function   = 0x0000,
-+		.sleep_conf     = 0x000c,
-+        },
-+        .gpio_b = {
-+		.dir            = 0xc142,
-+		.init           = 0x8842, // TODO: 0x0900
-+		.sleep_out      = 0x0000,
-+		.batt_fault_out = 0x0000,
-+		.alt_function   = 0x0000,
-+                .sleep_conf     = 0x000c,
-+        },
-+        .gpio_c = {
-+                .dir            = 0xc7e7,
-+                .init           = 0xc6e0, // TODO: 0x8000
-+                .sleep_out      = 0x0000,
-+                .batt_fault_out = 0x0000,
-+		.alt_function   = 0x0007, // GPIOC_LED_RED | GPIOC_LED_GREEN | GPIOC_LED_BLUE
-+                .sleep_conf     = 0x000c,
-+        },
-+        .gpio_d = {
-+		.dir            = 0xffc0,
-+		.init           = 0x7840, // TODO: 0x0000
-+		.sleep_out      = 0x0000,
-+		.batt_fault_out = 0x0000,
-+		.alt_function   = 0x0000,
-+		.sleep_conf     = 0x0008,
-+        },
-+	.bus_shift = 1,
-+	.irq_base = HTCUNIVERSAL_ASIC3_IRQ_BASE,
-+
-+	.child_platform_devs     = htcuniversal_asic3_devices,
-+	.num_child_platform_devs = ARRAY_SIZE(htcuniversal_asic3_devices),
-+};
-+
-+static struct resource htcuniversal_asic3_resources[] = {
-+	[0] = {
-+		.start	= HTCUNIVERSAL_ASIC3_GPIO_PHYS,
-+		.end	= HTCUNIVERSAL_ASIC3_GPIO_PHYS + IPAQ_ASIC3_MAP_SIZE,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= HTCUNIVERSAL_IRQ(ASIC3_EXT_INT),
-+		.end	= HTCUNIVERSAL_IRQ(ASIC3_EXT_INT),
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start  = HTCUNIVERSAL_ASIC3_MMC_PHYS,
-+		.end    = HTCUNIVERSAL_ASIC3_MMC_PHYS + IPAQ_ASIC3_MAP_SIZE,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[3] = {
-+		.start  = HTCUNIVERSAL_IRQ(ASIC3_SDIO_INT_N),
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device htcuniversal_asic3 = {
-+	.name           = "asic3",
-+	.id             = 0,
-+	.num_resources  = ARRAY_SIZE(htcuniversal_asic3_resources),
-+	.resource       = htcuniversal_asic3_resources,
-+	.dev = { .platform_data = &htcuniversal_asic3_platform_data, },
-+};
-+EXPORT_SYMBOL(htcuniversal_asic3);
-+
-+static struct pxafb_mode_info htcuniversal_lcd_modes[] = {
-+{
-+	.pixclock		= 96153,
-+	.xres			= 480,
-+	.yres			= 640,
-+	.bpp			= 16,
-+	.hsync_len		= 4,
-+	.vsync_len		= 1,
-+	.left_margin		= 20,
-+	.right_margin		= 8,
-+	.upper_margin		= 7,
-+	.lower_margin		= 8,
-+
-+//	.sync			= FB_SYNC_HOR_LOW_ACT|FB_SYNC_VERT_LOW_ACT,
-+
-+},
-+};
-+
-+static struct pxafb_mach_info sony_acx526akm = {
-+        .modes		= htcuniversal_lcd_modes,
-+        .num_modes	= ARRAY_SIZE(htcuniversal_lcd_modes),
-+
-+	/* fixme: use constants defined in pxafb.h */
-+	.lccr0			= 0x00000080,
-+	.lccr3			= 0x00400000,
-+//	.lccr4			= 0x80000000,
-+};
-+
-+static void __init htcuniversal_init_irq(void)
-+{
-+	pxa27x_init_irq();
-+}
-+
-+static struct platform_pxa_serial_funcs htcuniversal_pxa_bt_funcs = {
-+	.configure = htcuniversal_bt_configure,
-+};
-+static struct platform_pxa_serial_funcs htcuniversal_pxa_phone_funcs = {
-+	.configure = htcuniversal_phone_configure,
-+};
-+
-+/* USB OHCI */
-+
-+static int htcuniversal_ohci_init(struct device *dev)
-+{
-+	/* missing GPIO setup here */
-+
-+	/* got the value from wince */
-+	UHCHR=UHCHR_CGR;
-+
-+	return 0;
-+}
-+
-+static struct pxaohci_platform_data htcuniversal_ohci_platform_data = {
-+	.port_mode = PMM_PERPORT_MODE,
-+	.init = htcuniversal_ohci_init,
-+};
-+
-+static void __init htcuniversal_map_io(void)
-+{
-+	pxa_map_io();
-+
-+	pxa_set_btuart_info(&htcuniversal_pxa_bt_funcs);
-+	pxa_set_ffuart_info(&htcuniversal_pxa_phone_funcs);
-+}
-+
-+static void __init htcuniversal_init(void)
-+{
-+	set_pxa_fb_info(&sony_acx526akm);
-+
-+	platform_device_register(&htcuniversal_asic3);
-+	platform_add_devices(devices, ARRAY_SIZE(devices) );
-+	pxa_set_ficp_info(&htcuniversal_ficp_platform_data);
-+	pxa_set_ohci_info(&htcuniversal_ohci_platform_data);
-+}
-+
-+MACHINE_START(HTCUNIVERSAL, "HTC Universal")
-+	/* Maintainer xanadux.org */
-+	.phys_io	= 0x40000000,
-+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-+	.boot_params	= 0xa0000100,
-+	.map_io		= htcuniversal_map_io,
-+	.init_irq	= htcuniversal_init_irq,
-+	.init_machine	= htcuniversal_init,
-+	.timer		= &pxa_timer,
-+MACHINE_END
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,917 @@
-+/*
-+ * Audio support for codec Asahi Kasei AK4641
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Copyright (c) 2006 Giorgio Padrin <giorgio@mandarinlogiq.org>
-+ *
-+ * History:
-+ *
-+ * 2006-03	Written -- Giorgio Padrin
-+ * 2006-09	Test and debug on machine (HP hx4700) -- Elshin Roman <roxmail@list.ru>
-+ *
-+ * AK4641 codec device driver
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * Based on code:
-+ *   Copyright (c) 2002 Hewlett-Packard Company
-+ *   Copyright (c) 2000 Nicolas Pitre <nico@cam.org>
-+ *   Copyright (c) 2000 Lernout & Hauspie Speech Products, N.V.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License.
-+ */
-+
-+#include <sound/driver.h>
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/ioctl.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+
-+#include <sound/core.h>
-+#include <sound/control.h>
-+#include <sound/initval.h>
-+#include <sound/info.h>
-+
-+#include "htcuniversal_ak4641.h"
-+
-+/* Registers */
-+#define R_PM1		0x00
-+#define R_PM2		0x01
-+#define R_SEL1		0x02
-+#define R_SEL2		0x03
-+#define	R_MODE1		0x04
-+#define R_MODE2		0x05
-+#define R_DAC		0x06
-+#define R_MIC		0x07
-+#define REG_TIMER	0x08
-+#define REG_ALC1	0x09
-+#define REG_ALC2	0x0a
-+#define R_PGA		0x0b
-+#define R_ATTL		0x0c
-+#define R_ATTR		0x0d
-+#define REG_VOL		0x0e
-+#define R_STATUS	0x0f
-+#define REG_EQLO	0x10
-+#define REG_EQMID	0x11
-+#define REG_EQHI	0x12
-+#define REG_BTIF	0x13
-+
-+/* Register flags */
-+/* REG_PWR1 */
-+#define R_PM1_PMADC	0x01
-+#define R_PM1_PMMIC	0x02
-+#define REG_PWR1_PMAUX  0x04
-+#define REG_PWR1_PMMO   0x08
-+#define R_PM1_PMLO	0x10
-+/* unused               0x20 */
-+/* unused               0x40 */
-+#define R_PM1_PMVCM	0x80
-+
-+/* REG_PWR2 */
-+#define R_PM2_PMDAC	0x01
-+/* unused               0x02 */
-+/* unused               0x04 */
-+#define R_PM2_PMMO2	0x08
-+#define REG_PWR2_MCKAC  0x10
-+/* unused               0x20 */
-+/* unused               0x40 */
-+#define R_PM2_MCKPD	0x80
-+
-+/* REG_SEL1 */
-+#define R_SEL1_PSMO2	0x01
-+/* unused               0x02 */
-+/* unused               0x04 */
-+/* unused               0x08 */
-+#define REG_SEL1_MICM   0x10
-+#define REG_SEL1_DACM   0x20
-+#define REG_SEL1_PSMO   0x40
-+#define REG_SEL1_MOGN   0x80
-+
-+/* REG_SEL2 */
-+#define R_SEL2_PSLOR	0x01
-+#define R_SEL2_PSLOL	0x02
-+#define REG_SEL2_AUXSI  0x04
-+/* unused               0x08 */
-+#define REG_SEL2_MICL   0x10
-+#define REG_SEL2_AUXL   0x20
-+/* unused               0x40 */
-+#define R_SEL2_DACL	0x80
-+
-+/* REG_MODE1 */
-+#define REG_MODE1_DIF0  0x01
-+#define REG_MODE1_DIF1  0x02
-+/* unused               0x04 */
-+/* unused               0x08 */
-+/* unused               0x10 */
-+/* unused               0x20 */
-+/* unused               0x40 */
-+/* unused               0x80 */
-+
-+/* REG_MODE2 */
-+/* unused               0x01 */
-+#define REG_MODE2_LOOP  0x02
-+#define REG_MODE2_HPM   0x04
-+/* unused               0x08 */
-+/* unused               0x10 */
-+#define REG_MODE2_MCK0  0x20
-+#define REG_MODE2_MCK1  0x40
-+/* unused               0x80 */
-+
-+/* REG_DAC */
-+#define REG_DAC_DEM0    0x01
-+#define REG_DAC_DEM1    0x02
-+#define REG_DAC_EQ      0x04
-+/* unused               0x08 */
-+#define R_DAC_DATTC	0x10
-+#define R_DAC_SMUTE	0x20
-+#define REG_DAC_TM      0x40
-+/* unused               0x80 */
-+
-+/* REG_MIC */
-+#define R_MIC_MGAIN	0x01
-+#define R_MIC_MSEL	0x02
-+#define R_MIC_MICAD	0x04
-+#define R_MIC_MPWRI	0x08
-+#define R_MIC_MPWRE	0x10
-+#define REG_MIC_AUXAD   0x20
-+/* unused               0x40 */
-+/* unused               0x80 */
-+
-+/* REG_TIMER */
-+
-+#define REG_TIMER_LTM0  0x01
-+#define REG_TIMER_LTM1  0x02
-+#define REG_TIMER_WTM0  0x04
-+#define REG_TIMER_WTM1  0x08
-+#define REG_TIMER_ZTM0  0x10
-+#define REG_TIMER_ZTM1  0x20
-+/* unused               0x40 */
-+/* unused               0x80 */
-+
-+#define REG_ALC1_LMTH   0x01
-+#define REG_ALC1_RATT   0x02
-+#define REG_ALC1_LMAT0  0x04
-+#define REG_ALC1_LMAT1  0x08
-+#define REG_ALC1_ZELM   0x10
-+#define REG_ALC1_ALC1   0x20
-+/* unused               0x40 */
-+/* unused               0x80 */
-+
-+/* REG_ALC2 */
-+
-+/* REG_PGA */
-+
-+/* REG_ATTL */
-+
-+/* REG_ATTR */
-+
-+/* REG_VOL */
-+#define REG_VOL_ATTM	0x80
-+
-+/* REG_STATUS */
-+#define R_STATUS_DTMIC	0x01
-+
-+/* REG_EQ controls use 4 bits for each of 5 EQ levels */
-+
-+/* Bluetooth not yet implemented */
-+#define REG_BTIF_PMAD2  0x01
-+#define REG_BTIF_PMDA2  0x02
-+#define REG_BTIF_PMBIF  0x04
-+#define REG_BTIF_ADC2   0x08
-+#define REG_BTIF_DAC2   0x10
-+#define REG_BTIF_BTFMT0 0x20
-+#define REG_BTIF_BTFMT1 0x40
-+/* unused               0x80 */
-+
-+/* begin {{ I2C }} */
-+
-+static struct i2c_driver snd_ak4641_i2c_driver = {
-+	.driver = {
-+		.name = "ak4641-i2c"
-+	},
-+};
-+
-+static int snd_ak4641_i2c_init(void)
-+{
-+	return i2c_add_driver(&snd_ak4641_i2c_driver);
-+}
-+
-+static void snd_ak4641_i2c_free(void)
-+{
-+	i2c_del_driver(&snd_ak4641_i2c_driver);
-+}
-+
-+static inline int snd_ak4641_i2c_probe(struct snd_ak4641 *ak)
-+{
-+	if (ak->i2c_client.adapter == NULL) return -EINVAL;
-+	ak->i2c_client.addr = 0x12;
-+	if (i2c_smbus_xfer(ak->i2c_client.adapter, ak->i2c_client.addr,
-+			   0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
-+		return -ENODEV;
-+	else return 0;
-+}
-+
-+static int snd_ak4641_i2c_attach(struct snd_ak4641 *ak)
-+{
-+	int ret = 0;
-+	if ((ret = snd_ak4641_i2c_probe(ak)) < 0) return ret;
-+	snprintf(ak->i2c_client.name, sizeof(ak->i2c_client.name),
-+		 "ak4641-i2c at %d-%04x",
-+		 i2c_adapter_id(ak->i2c_client.adapter), ak->i2c_client.addr);
-+	return i2c_attach_client(&ak->i2c_client);
-+}
-+
-+static void snd_ak4641_i2c_detach(struct snd_ak4641 *ak)
-+{
-+	i2c_detach_client(&ak->i2c_client);
-+}
-+
-+/* end {{ I2C }} */
-+
-+
-+/* begin {{ Registers & Cache Ops }} */
-+
-+static int snd_ak4641_hwsync(struct snd_ak4641 *ak, int read, u8 reg)
-+{
-+	struct i2c_msg msgs[2];
-+	u8 buf[2];
-+	int ret;
-+
-+	snd_assert(reg < ARRAY_SIZE(ak->regs), return -EINVAL);
-+
-+	/* setup i2c msgs */
-+	msgs[0].addr = ak->i2c_client.addr;
-+	msgs[0].flags = 0;
-+	msgs[0].buf = buf;
-+	if (!read)
-+		msgs[0].len = 2;
-+	else {
-+		msgs[1].flags = I2C_M_RD;
-+		msgs[1].addr = msgs[0].addr;
-+		msgs[1].buf = msgs[0].buf + 1;
-+		msgs[0].len = 1;
-+		msgs[1].len = 1;
-+	}
-+
-+	buf[0] = reg;
-+
-+	/* regs[reg] -> buffer, on write */
-+	if (!read) buf[1] = ak->regs[reg];
-+
-+	/* i2c transfer */
-+	ret = i2c_transfer(ak->i2c_client.adapter, msgs, read ? 2 : 1);
-+	if (ret != (read ? 2 : 1)) return ret; /* transfer error */ //@@ error ret < 0, or not ?
-+
-+	/* regs[reg] <- buffer, on read */
-+	if (read) ak->regs[reg] = buf[1];
-+
-+	return 0;
-+}
-+
-+static inline int snd_ak4641_hwsync_read(struct snd_ak4641 *ak, u8 reg)
-+{
-+	return snd_ak4641_hwsync(ak, 1, reg);
-+}
-+
-+static inline int snd_ak4641_hwsync_write(struct snd_ak4641 *ak, u8 reg)
-+{
-+	return snd_ak4641_hwsync(ak, 0, reg);
-+}
-+
-+static int snd_ak4641_hwsync_read_all(struct snd_ak4641 *ak)
-+{
-+	u8 reg;
-+	for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++)
-+		if (snd_ak4641_hwsync_read(ak, reg) < 0) return -1;
-+	return 0;
-+}
-+
-+static int snd_ak4641_hwsync_write_all(struct snd_ak4641 *ak)
-+{
-+	u8 reg;
-+	for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++)
-+		if (snd_ak4641_hwsync_write(ak, reg) < 0) return -1;
-+	return 0;
-+}
-+
-+static int snd_ak4641_reg_changed(struct snd_ak4641 *ak, u8 reg)
-+{
-+	if ((reg != R_PGA && ak->powered_on) ||
-+	    (reg == R_PGA && (ak->regs[R_PM1] & R_PM1_PMMIC)))
-+ 		return snd_ak4641_hwsync_write(ak, reg);
-+	return 0;
-+}
-+
-+/* end {{ Registers & Cache Ops }}*/
-+
-+
-+static inline void snd_ak4641_lock(struct snd_ak4641 *ak)
-+{
-+	down(&ak->sem);
-+}
-+
-+static inline void snd_ak4641_unlock(struct snd_ak4641 *ak)
-+{
-+	up(&ak->sem);
-+}
-+
-+#define WRITE_MASK(i, val, mask)	(((i) & ~(mask)) | ((val) & (mask)))
-+
-+
-+/* begin {{ Controls }} */
-+
-+#define INV_RANGE(val, mask) \
-+	(~(val) & (mask))
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_actl_playback_volume_info(struct snd_kcontrol *kcontrol,
-+						struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 2;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 0xff;
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_playback_volume_get(struct snd_kcontrol *kcontrol,
-+					       struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+
-+	snd_ak4641_lock(ak);
-+	ucontrol->value.integer.value[0] = INV_RANGE(ak->regs[R_ATTL], 0xff);
-+	ucontrol->value.integer.value[1] = INV_RANGE(ak->regs[R_ATTR], 0xff);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_playback_volume_put(struct snd_kcontrol *kcontrol,
-+					       struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_ATTL] = INV_RANGE(ucontrol->value.integer.value[0], 0xff);
-+	ak->regs[R_ATTR] = INV_RANGE(ucontrol->value.integer.value[1], 0xff);
-+	snd_ak4641_reg_changed(ak, R_ATTL);
-+	snd_ak4641_reg_changed(ak, R_ATTR);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_actl_mic_gain_info(struct snd_kcontrol *kcontrol,
-+					 struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 0x7f;
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_mic_gain_get(struct snd_kcontrol *kcontrol,
-+					struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+
-+	ucontrol->value.integer.value[0] = ak->regs[R_PGA];
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_mic_gain_put(struct snd_kcontrol *kcontrol,
-+					struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_PGA] = ucontrol->value.integer.value[0];
-+	snd_ak4641_reg_changed(ak, R_PGA);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+#define ACTL(ctl_name, _name) \
-+static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, \
-+  .info = snd_ak4641_actl_ ## ctl_name ## _info, \
-+  .get = snd_ak4641_actl_ ## ctl_name ## _get, .put = snd_ak4641_actl_ ## ctl_name ## _put };
-+
-+ACTL(playback_volume, "Master Playback Volume")
-+ACTL(mic_gain, "Mic Capture Gain")
-+
-+struct snd_ak4641_uctl_bool {
-+	int (*get) (struct snd_ak4641 *uda);
-+	int (*set) (struct snd_ak4641 *uda, int on);
-+};
-+
-+static int snd_ak4641_actl_bool_info(struct snd_kcontrol *kcontrol,
-+				      struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	uinfo->count = 1;
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_bool_get(struct snd_kcontrol *kcontrol,
-+				     struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+	struct snd_ak4641_uctl_bool *uctl =
-+		(struct snd_ak4641_uctl_bool *) kcontrol->private_value;
-+
-+	ucontrol->value.integer.value[0] = uctl->get(ak);
-+	return 0;
-+}
-+
-+static int snd_ak4641_actl_bool_put(struct snd_kcontrol *kcontrol,
-+				     struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data;
-+	struct snd_ak4641_uctl_bool *uctl =
-+		(struct snd_ak4641_uctl_bool *) kcontrol->private_value;
-+
-+	return uctl->set(ak, ucontrol->value.integer.value[0]);
-+}
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_uctl_playback_switch_get(struct snd_ak4641 *ak)
-+{
-+	return (ak->regs[R_DAC] & R_DAC_SMUTE) == 0x00;
-+}
-+
-+static int snd_ak4641_uctl_playback_switch_set(struct snd_ak4641 *ak, int on)
-+{
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC],
-+				     on ? 0x00 : R_DAC_SMUTE, R_DAC_SMUTE);
-+	snd_ak4641_reg_changed(ak, R_DAC);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_uctl_mic_boost_get(struct snd_ak4641 *ak)
-+{
-+	return (ak->regs[R_MIC] & R_MIC_MGAIN) == R_MIC_MGAIN;
-+}
-+
-+static int snd_ak4641_uctl_mic_boost_set(struct snd_ak4641 *ak, int on)
-+{
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC],
-+				     on ? R_MIC_MGAIN : 0x00, R_MIC_MGAIN);
-+	snd_ak4641_reg_changed(ak, R_MIC);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+/*-begin----------------------------------------------------------*/
-+static int snd_ak4641_uctl_mono_out_get(struct snd_ak4641 *ak)
-+{
-+        printk("mono_out status 0x%8.8x -> 0x%8.8x\n",ak->regs[R_SEL1], ak->regs[R_SEL1] & REG_SEL1_PSMO);
-+	return (ak->regs[R_SEL1] & REG_SEL1_PSMO) == REG_SEL1_PSMO;
-+}
-+
-+static int snd_ak4641_uctl_mono_out_set(struct snd_ak4641 *ak, int on)
-+{
-+        printk("phone mic enable called. on=%d\n",on);
-+	snd_ak4641_lock(ak);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? R_PM1_PMMIC : 0x00, R_PM1_PMMIC);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? REG_PWR1_PMMO : 0x00, REG_PWR1_PMMO);
-+	snd_ak4641_reg_changed(ak, R_PM1);
-+
-+	snd_ak4641_hwsync_write(ak, R_PGA);	/* mic PGA gain is reset when PMMIC = 0 */
-+
-+	/* internal mic */
-+        ak->regs[R_MIC]	= WRITE_MASK(ak->regs[R_MIC], on ? R_MIC_MPWRI : 0x0, R_MIC_MPWRI);
-+        ak->regs[R_MIC]	= WRITE_MASK(ak->regs[R_MIC],                    0x0, R_MIC_MSEL);
-+        snd_ak4641_hwsync_write(ak, R_MIC);
-+
-+//        ak->regs[REG_BTIF]	= WRITE_MASK(ak->regs[REG_BTIF], 0x0, REG_BTIF_DAC2);
-+//        snd_ak4641_hwsync_write(ak, REG_BTIF);
-+	/* */
-+//	ak->regs[REG_VOL] = WRITE_MASK(ak->regs[REG_VOL], on ? REG_VOL_ATTM : 0x00, REG_VOL_ATTM);
-+//	ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MOGN : 0x00, REG_SEL1_MOGN);
-+	ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MICM : 0x00, REG_SEL1_MICM);
-+	ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_PSMO : 0x00, REG_SEL1_PSMO);
-+	snd_ak4641_reg_changed(ak, R_SEL1);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+/*-end------------------------------------------------------------*/
-+
-+#define ACTL_BOOL(ctl_name, _name) \
-+static struct snd_ak4641_uctl_bool snd_ak4641_actl_ ## ctl_name ## _pvalue = \
-+{ .get = snd_ak4641_uctl_ ## ctl_name ## _get, \
-+  .set = snd_ak4641_uctl_ ## ctl_name ## _set }; \
-+static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, .info = snd_ak4641_actl_bool_info, \
-+  .get = snd_ak4641_actl_bool_get, .put = snd_ak4641_actl_bool_put, \
-+  .private_value = (unsigned long) &snd_ak4641_actl_ ## ctl_name ## _pvalue };
-+
-+ACTL_BOOL(playback_switch, "Master Playback Switch")
-+ACTL_BOOL(mic_boost, "Mic Boost (+20dB)")
-+ACTL_BOOL(mono_out, "Phone mic enable")
-+
-+static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on);
-+static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on);
-+static void snd_ak4641_select_mic(struct snd_ak4641 *ak);
-+
-+void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected)
-+{
-+	snd_ak4641_lock(ak);
-+	if (connected != ak->hp_connected) {
-+		ak->hp_connected = connected;
-+
-+		/* headphone or speaker, on playback */
-+		if (ak->playback_on) {
-+			if (connected) {
-+				snd_ak4641_headphone_on(ak, 1);
-+				snd_ak4641_speaker_on(ak, 0);
-+			} else {
-+				snd_ak4641_speaker_on(ak, 1);
-+				snd_ak4641_headphone_on(ak, 0);
-+			}
-+		}
-+
-+		/* headset or internal mic, on capture */
-+		if (ak->capture_on)
-+			snd_ak4641_select_mic(ak);
-+	}
-+	snd_ak4641_unlock(ak);
-+}
-+
-+/* end {{ Controls }} */
-+
-+
-+/* begin {{ Headphone Detected Notification }} */
-+
-+static void snd_ak4641_hp_detected_w_fn(void *p)
-+{
-+	struct snd_ak4641 *ak = (struct snd_ak4641 *)p;
-+
-+	snd_ak4641_hp_connected(ak, ak->hp_detected.detected);
-+}
-+
-+void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected)
-+{
-+	if (detected != ak->hp_detected.detected) {
-+		ak->hp_detected.detected = detected;
-+		queue_work(ak->hp_detected.wq, &ak->hp_detected.w);
-+	}
-+}
-+
-+static int snd_ak4641_hp_detected_init(struct snd_ak4641 *ak)
-+{
-+	INIT_WORK(&ak->hp_detected.w, snd_ak4641_hp_detected_w_fn);
-+	ak->hp_detected.detected = ak->hp_connected;
-+	ak->hp_detected.wq = create_singlethread_workqueue("ak4641");
-+	if (ak->hp_detected.wq) return 0;
-+	else return -1;
-+}
-+
-+static void snd_ak4641_hp_detected_free(struct snd_ak4641 *ak)
-+{
-+	destroy_workqueue(ak->hp_detected.wq);
-+}
-+
-+/* end {{ Headphone Detected Notification }} */
-+
-+
-+/* begin {{ Codec Control }} */
-+
-+static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on)
-+{
-+	if (on) {
-+		ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO);
-+		snd_ak4641_hwsync_write(ak, R_PM1);
-+		ak->headphone_out_on(1);
-+		ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2],
-+					      R_SEL2_PSLOL | R_SEL2_PSLOR,
-+					      R_SEL2_PSLOL | R_SEL2_PSLOR);
-+		snd_ak4641_hwsync_write(ak, R_SEL2);
-+	} else {
-+		ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2],
-+					      0x00, R_SEL2_PSLOL | R_SEL2_PSLOR);
-+		snd_ak4641_hwsync_write(ak, R_SEL2);
-+		ak->headphone_out_on(0);
-+		ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO);
-+		snd_ak4641_hwsync_write(ak, R_PM1);
-+	}
-+}
-+
-+static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on)
-+{
-+	if (on) {
-+		ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO);
-+		snd_ak4641_hwsync_write(ak, R_PM1);
-+		ak->speaker_out_on(1);
-+		ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2],
-+					      R_SEL2_PSLOL | R_SEL2_PSLOR,
-+					      R_SEL2_PSLOL | R_SEL2_PSLOR);
-+		snd_ak4641_hwsync_write(ak, R_SEL2);
-+	} else {
-+		ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2],
-+					      0x00, R_SEL2_PSLOL | R_SEL2_PSLOR);
-+		snd_ak4641_hwsync_write(ak, R_SEL2);
-+		ak->speaker_out_on(0);
-+		ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO);
-+		snd_ak4641_hwsync_write(ak, R_PM1);
-+	}
-+}
-+
-+static inline int snd_ak4641_power_on(struct snd_ak4641 *ak)
-+{
-+	ak->reset_pin(1);
-+	ak->power_on_chip(1);
-+	msleep(1);
-+	ak->reset_pin(0);
-+	ak->powered_on = 1;
-+	return 0;
-+}
-+
-+static inline int snd_ak4641_power_off(struct snd_ak4641 *ak)
-+{
-+	ak->powered_on = 0;
-+	ak->power_on_chip(0);
-+	return 0;
-+}
-+
-+static inline void snd_ak4641_headphone_out_on(struct snd_ak4641 *ak, int on)
-+{
-+	if (ak->headphone_out_on) ak->headphone_out_on(on);
-+}
-+
-+static inline void snd_ak4641_speaker_out_on(struct snd_ak4641 *ak, int on)
-+{
-+	if (ak->speaker_out_on) ak->speaker_out_on(on);
-+}
-+
-+static int snd_ak4641_playback_on(struct snd_ak4641 *ak)
-+{
-+	if (ak->playback_on) return 0;
-+
-+	ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2],
-+				     R_PM2_PMDAC, R_PM2_MCKPD | R_PM2_PMDAC);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO);
-+	snd_ak4641_hwsync_write(ak, R_PM2);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	if (ak->hp_connected) snd_ak4641_headphone_on(ak, 1);
-+	else snd_ak4641_speaker_on(ak, 1);
-+
-+	ak->playback_on = 1;
-+
-+	return 0;
-+}
-+
-+static int snd_ak4641_playback_off(struct snd_ak4641 *ak)
-+{
-+	if (!ak->playback_on) return 0;
-+
-+	ak->playback_on = 0;
-+
-+	if (ak->hp_connected) snd_ak4641_headphone_on(ak, 0);
-+	else snd_ak4641_speaker_on(ak, 0);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO);
-+	ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2],
-+				    (!ak->capture_on ? R_PM2_MCKPD : 0x00) | R_PM2_PMDAC,
-+				    R_PM2_MCKPD | R_PM2_PMDAC);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	snd_ak4641_hwsync_write(ak, R_PM2);
-+
-+	return 0;
-+}
-+
-+static void snd_ak4641_select_mic(struct snd_ak4641 *ak)
-+{
-+	int mic = 0;
-+	u8 r_mic;
-+
-+	if (ak->hp_connected) {
-+		/* check headset mic */
-+		ak->regs[R_MIC]	= WRITE_MASK(ak->regs[R_MIC], R_MIC_MPWRE, R_MIC_MPWRE);
-+		snd_ak4641_hwsync_write(ak, R_MIC);
-+		snd_ak4641_hwsync_read(ak, R_STATUS);
-+		mic = (ak->regs[R_STATUS] & R_STATUS_DTMIC) == R_STATUS_DTMIC;
-+
-+		printk("htcuniversal_ak4641_select_mic: mic=%d\n",mic);
-+
-+	 r_mic = WRITE_MASK(ak->regs[R_MIC],
-+			   R_MIC_MSEL | (ak->capture_on ? R_MIC_MPWRE : 0x00),
-+			   R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE);
-+	}
-+	else
-+	 r_mic = WRITE_MASK(ak->regs[R_MIC],
-+			         0x00 | (ak->capture_on ? R_MIC_MPWRI : 0x00),
-+			   R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE);
-+
-+	if (r_mic != ak->regs[R_MIC]) {
-+		ak->regs[R_MIC] = r_mic;
-+		snd_ak4641_hwsync_write(ak, R_MIC);
-+	}
-+}
-+
-+static int snd_ak4641_capture_on(struct snd_ak4641 *ak)
-+{
-+	if (ak->capture_on) return 0;
-+
-+	if (!ak->playback_on) {
-+		ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], 0x00, R_PM2_MCKPD);
-+		snd_ak4641_hwsync_write(ak, R_PM2);
-+	}
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMMIC | R_PM1_PMADC,
-+						      R_PM1_PMMIC | R_PM1_PMADC);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	snd_ak4641_hwsync_write(ak, R_PGA);	/* mic PGA gain is reset when PMMIC = 0 */
-+
-+	ak->capture_on = 1;
-+
-+	snd_ak4641_select_mic(ak);
-+
-+	msleep(47);	/* accounts for ADC init cycle, time enough for fs >= 44.1 kHz */
-+
-+	return 0;
-+}
-+
-+static int snd_ak4641_capture_off(struct snd_ak4641 *ak)
-+{
-+	if (!ak->capture_on) return 0;
-+
-+	ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC],
-+				     0x00, R_MIC_MPWRI | R_MIC_MPWRE | R_MIC_MSEL);
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMMIC | R_PM1_PMADC);
-+	snd_ak4641_hwsync_write(ak, R_MIC);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	if (!ak->playback_on) {
-+		ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], R_PM2_MCKPD, R_PM2_MCKPD);
-+		snd_ak4641_hwsync_write(ak, R_PM2);
-+	}
-+
-+	ak->capture_on = 0;
-+
-+	return 0;
-+}
-+
-+int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream)
-+{
-+	snd_ak4641_lock(ak);
-+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+		ak->playback_stream_opened = 1;
-+		snd_ak4641_playback_on(ak);
-+	} else {
-+		ak->capture_stream_opened = 1;
-+		snd_ak4641_capture_on(ak);
-+	}
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream)
-+{
-+	snd_ak4641_lock(ak);
-+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+		ak->playback_stream_opened = 0;
-+		snd_ak4641_playback_off(ak);
-+	} else {
-+		ak->capture_stream_opened = 0;
-+		snd_ak4641_capture_off(ak);
-+	}
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+static int snd_ak4641_init_regs(struct snd_ak4641 *ak)
-+{
-+	snd_ak4641_hwsync_read_all(ak);
-+
-+	//@@ MEMO: add some configs
-+
-+	ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMVCM, R_PM1_PMVCM);
-+	ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC], 0x00, R_DAC_DATTC);
-+	snd_ak4641_hwsync_write(ak, R_PM1);
-+	snd_ak4641_hwsync_write(ak, R_DAC);
-+
-+	return 0;
-+}
-+
-+int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state)
-+{
-+	snd_ak4641_lock(ak);
-+	if (ak->playback_on) snd_ak4641_playback_off(ak);
-+	if (ak->capture_on) snd_ak4641_capture_off(ak);
-+	snd_ak4641_power_off(ak);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+int snd_ak4641_resume(struct snd_ak4641 *ak)
-+{
-+	snd_ak4641_lock(ak);
-+	snd_ak4641_power_on(ak);
-+	snd_ak4641_hwsync_write_all(ak);
-+	if (ak->playback_stream_opened) snd_ak4641_playback_on(ak);
-+	if (ak->capture_stream_opened) snd_ak4641_capture_on(ak);
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+static void snd_ak4641_init_ak(struct snd_ak4641 *ak)
-+{
-+	init_MUTEX(&ak->sem);
-+	ak->i2c_client.driver = &snd_ak4641_i2c_driver;
-+}
-+
-+int snd_ak4641_activate(struct snd_ak4641 *ak)
-+{
-+	int ret = 0;
-+
-+	snd_ak4641_init_ak(ak);
-+	snd_ak4641_lock(ak);
-+	snd_ak4641_power_on(ak);
-+	if ((ret = snd_ak4641_i2c_attach(ak)) < 0)
-+		goto failed_i2c_attach;
-+	snd_ak4641_init_regs(ak);
-+	if ((ret = snd_ak4641_hp_detected_init(ak)) < 0)
-+		goto failed_hp_detected_init;
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+
-+ failed_hp_detected_init:
-+	snd_ak4641_i2c_detach(ak);
-+ failed_i2c_attach:
-+	snd_ak4641_power_off(ak);
-+	snd_ak4641_unlock(ak);
-+	return ret;
-+}
-+
-+void snd_ak4641_deactivate(struct snd_ak4641 *ak)
-+{
-+	snd_ak4641_lock(ak);
-+	snd_ak4641_hp_detected_free(ak);
-+	snd_ak4641_i2c_detach(ak);
-+	snd_ak4641_power_off(ak);
-+	snd_ak4641_unlock(ak);
-+}
-+
-+int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card)
-+{
-+	snd_ak4641_lock(ak);
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_volume, ak));
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_switch, ak));
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_gain, ak));
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_boost, ak));
-+	snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mono_out, ak));
-+	snd_ak4641_unlock(ak);
-+	return 0;
-+}
-+
-+/* end {{ Codec Control }} */
-+
-+
-+/* begin {{ Module }} */
-+
-+static int __init snd_ak4641_module_on_load(void)
-+{
-+	snd_ak4641_i2c_init();
-+	return 0;
-+}
-+
-+static void __exit snd_ak4641_module_on_unload(void)
-+{
-+	snd_ak4641_i2c_free();
-+}
-+
-+module_init(snd_ak4641_module_on_load);
-+module_exit(snd_ak4641_module_on_unload);
-+
-+EXPORT_SYMBOL(snd_ak4641_activate);
-+EXPORT_SYMBOL(snd_ak4641_deactivate);
-+EXPORT_SYMBOL(snd_ak4641_add_mixer_controls);
-+EXPORT_SYMBOL(snd_ak4641_open_stream);
-+EXPORT_SYMBOL(snd_ak4641_close_stream);
-+EXPORT_SYMBOL(snd_ak4641_suspend);
-+EXPORT_SYMBOL(snd_ak4641_resume);
-+EXPORT_SYMBOL(snd_ak4641_hp_connected);
-+EXPORT_SYMBOL(snd_ak4641_hp_detected);
-+
-+MODULE_AUTHOR("Giorgio Padrin");
-+MODULE_DESCRIPTION("Audio support for codec Asahi Kasei AK4641");
-+MODULE_LICENSE("GPL");
-+
-+/* end {{ Module }} */
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,65 @@
-+/*
-+ * Audio support for codec Asahi Kasei AK4641
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Copyright (c) 2006 Giorgio Padrin <giorgio@mandarinlogiq.org>
-+ */
-+
-+#ifndef __SOUND_AK4641_H
-+#define __SOUND_AK4641_H
-+
-+#include <linux/i2c.h>
-+
-+struct snd_ak4641 {
-+	struct semaphore sem;
-+
-+	u8 regs[0x14];	/* registers cache */
-+
-+	unsigned int
-+		powered_on:1,
-+		playback_on:1,
-+		playback_stream_opened:1,
-+		capture_on:1,
-+		capture_stream_opened:1;
-+
-+	unsigned int
-+		hp_connected:1;
-+
-+	/* -- configuration (to fill before activation) -- */
-+	void (*power_on_chip)(int on);
-+	void (*reset_pin)(int on);
-+	void (*headphone_out_on)(int on);
-+	void (*speaker_out_on)(int on);
-+
-+	struct i2c_client i2c_client; /* to fill .adapter */
-+	/* ----------------------------------------------- */
-+
-+	struct {
-+		int detected;
-+		struct workqueue_struct *wq;
-+		struct work_struct w;
-+	} hp_detected;
-+};
-+
-+
-+/* Note: opening, closing, suspending and resuming a stream
-+ * require the clocks (MCLK and I2S ones) running
-+ */
-+
-+/* don't forget to specify I2C adapter in i2c_client field */
-+int snd_ak4641_activate(struct snd_ak4641 *ak);
-+
-+void snd_ak4641_deactivate(struct snd_ak4641 *ak);
-+int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card);
-+int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream);
-+int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream);
-+int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state);
-+int snd_ak4641_resume(struct snd_ak4641 *ak);
-+
-+void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected); /* non atomic context */
-+void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected); /* atomic context */
-+
-+#endif /* __SOUND_AK4641_H */
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,143 @@
-+/*
-+ * LEDs support for the HP iPaq hx4700
-+ *
-+ * Copyright (c) 2006  Anton Vorontsov <cbou@mail.ru>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware/asic3_leds.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+//FIXME
-+//DEFINE_LED_TRIGGER_SHARED_GLOBAL(htcuniversal_radio_trig);
-+//EXPORT_LED_TRIGGER_SHARED(htcuniversal_radio_trig);
-+
-+static struct asic3_led htcuniversal_leds[] = {
-+	{
-+		.led_cdev  = {
-+			.name	        = "htcuniversal:red",
-+			.default_trigger = "htcuniversal-charging",
-+		},
-+		.hw_num = 2,
-+
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:green",
-+			.default_trigger = "htcuniversal-chargefull",
-+		},
-+		.hw_num = 1,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:wifi-bt",
-+			.default_trigger = "htcuniversal-radio",
-+		},
-+		.hw_num = 0,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:phonebuttons",
-+			.default_trigger = "htcuniversal-phonebuttons",
-+		},
-+		.hw_num = -1,
-+		.gpio_num = ('D'-'A')*16+GPIOD_BL_KEYP_PWR_ON,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:vibra",
-+			.default_trigger = "htcuniversal-vibra",
-+		},
-+		.hw_num = -1,
-+		.gpio_num = ('D'-'A')*16+GPIOD_VIBRA_PWR_ON,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:flashlight1",
-+			.default_trigger = "htcuniversal-flashlight1",
-+		},
-+		.hw_num = -1,
-+		.gpio_num = ('A'-'A')*16+GPIOA_FLASHLIGHT,
-+	},
-+	{
-+		.led_cdev  = {
-+			.name	         = "htcuniversal:kbdbacklight",
-+			.default_trigger = "htcuniversal-kbdbacklight",
-+		},
-+		.hw_num = -1,
-+		.gpio_num = ('D'-'A')*16+GPIOD_BL_KEYB_PWR_ON,
-+	},
-+};
-+
-+void htcuniversal_leds_release(struct device *dev)
-+{
-+	return;
-+}
-+
-+static
-+struct asic3_leds_machinfo htcuniversal_leds_machinfo = {
-+	.num_leds = ARRAY_SIZE(htcuniversal_leds),
-+	.leds = htcuniversal_leds,
-+	.asic3_pdev = &htcuniversal_asic3,
-+};
-+
-+static
-+struct platform_device htcuniversal_leds_pdev = {
-+	.name = "asic3-leds",
-+	.dev = {
-+		.platform_data = &htcuniversal_leds_machinfo,
-+		.release = htcuniversal_leds_release,
-+	},
-+};
-+
-+static
-+int __init htcuniversal_leds_init(void)
-+{
-+	int ret;
-+	printk("htcuniversal LEDs Driver\n");
-+//	led_trigger_register_shared("htcuniversal-radio", &htcuniversal_radio_trig);
-+
-+	ret = asic3_leds_register();
-+	if (ret) goto asic3_leds_failed;
-+
-+	ret = platform_device_register(&htcuniversal_leds_pdev);
-+	if (ret) goto platform_device_failed;
-+
-+	goto success;
-+
-+platform_device_failed:
-+	asic3_leds_unregister();
-+asic3_leds_failed:
-+//	led_trigger_unregister_shared(htcuniversal_radio_trig);
-+	printk("htcuniversal LEDs Driver failed to init");
-+success:
-+	return ret;
-+}
-+
-+static
-+void __exit htcuniversal_leds_exit(void)
-+{
-+//	led_trigger_unregister_shared(htcuniversal_radio_trig);
-+	platform_device_unregister(&htcuniversal_leds_pdev);
-+	asic3_leds_unregister();
-+	return;
-+}
-+
-+module_init(htcuniversal_leds_init);
-+module_exit(htcuniversal_leds_exit);
-+
-+MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
-+MODULE_DESCRIPTION("htcuniversal LEDs driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,61 @@
-+/*
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ * Copyright (C) 2006 Paul Sokolosvky
-+ * Based on code from older versions of htcuniversal_lcd.c
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/hardware.h>  /* for pxa-regs.h (__REG) */
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/mach-types.h>     /* machine_is_htcuniversal */
-+//#include <linux/corgi_bl.h>
-+#include <linux/backlight.h>
-+#include <linux/err.h>
-+
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#define HTCUNIVERSAL_MAX_INTENSITY 0xc7
-+
-+static void htcuniversal_set_bl_intensity(int intensity)
-+{
-+	PWM_CTRL1 = 1;            /* pre-scaler */
-+	PWM_PWDUTY1 = intensity; /* duty cycle */
-+	PWM_PERVAL1 = HTCUNIVERSAL_MAX_INTENSITY+1;      /* period */
-+
-+	if (intensity > 0) {
-+		pxa_set_cken(CKEN_PWM1, 1);
-+                asic3_set_gpio_out_d(&htcuniversal_asic3.dev,
-+                        (1<<GPIOD_FL_PWR_ON), (1<<GPIOD_FL_PWR_ON));
-+	} else {
-+		pxa_set_cken(CKEN_PWM1, 0);
-+                asic3_set_gpio_out_d(&htcuniversal_asic3.dev,
-+                        (1<<GPIOD_FL_PWR_ON), 0);
-+	}
-+}
-+
-+
-+static struct generic_bl_info htcuniversal_bl_machinfo = {
-+        .default_intensity = HTCUNIVERSAL_MAX_INTENSITY / 4,
-+        .limit_mask = 0xff,
-+        .max_intensity = HTCUNIVERSAL_MAX_INTENSITY,
-+        .set_bl_intensity = htcuniversal_set_bl_intensity,
-+};
-+
-+struct platform_device htcuniversal_bl = {
-+        .name = "corgi-bl",
-+        .dev = {
-+    		.platform_data = &htcuniversal_bl_machinfo,
-+	},
-+};
-+
-+MODULE_AUTHOR("Paul Sokolovsky <pmiscml@gmail.com>");
-+MODULE_DESCRIPTION("Backlight driver for HTC Universal");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,135 @@
-+/* Bluetooth interface driver for TI BRF6150 on HX4700
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-04-21   Todd Blumer             Created.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/arch/serial.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+#include "htcuniversal_bt.h"
-+
-+static uint use_led=1;
-+
-+static void
-+htcuniversal_bt_configure( int state )
-+{
-+	int tries;
-+
-+	printk( KERN_NOTICE "htcuniversal configure bluetooth: %d\n", state );
-+	switch (state) {
-+
-+	case PXA_UART_CFG_PRE_STARTUP:
-+		break;
-+
-+	case PXA_UART_CFG_POST_STARTUP:
-+		/* pre-serial-up hardware configuration */
-+		htcuniversal_egpio_enable(1<<EGPIO5_BT_3V3_ON);
-+		mdelay(50);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_BT_PWR_ON, 1<<GPIOC_BT_PWR_ON);
-+		mdelay(10);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_BT_RESET, 0);
-+		mdelay(10);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_BT_RESET, 1<<GPIOC_BT_RESET);
-+		mdelay(10);
-+
-+		/*
-+		 * BRF6150's RTS goes low when firmware is ready
-+		 * so check for CTS=1 (nCTS=0 -> CTS=1). Typical 150ms
-+		 */
-+		tries = 0;
-+		do {
-+			mdelay(10);
-+		} while ((BTMSR & MSR_CTS) == 0 && tries++ < 50);
-+		if (use_led) {
-+//			htcuniversal_set_led(2, 16, 16);
-+		}
-+		break;
-+
-+	case PXA_UART_CFG_PRE_SHUTDOWN:
-+		htcuniversal_egpio_disable(1<<EGPIO5_BT_3V3_ON );
-+		mdelay(50);
-+//		htcuniversal_clear_led(2);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_BT_PWR_ON, 0);
-+		break;
-+
-+	default:
-+		break;
-+	}
-+}
-+
-+
-+static int
-+htcuniversal_bt_probe( struct platform_device *dev )
-+{
-+	struct htcuniversal_bt_funcs *funcs = dev->dev.platform_data;
-+
-+	/* configure bluetooth UART */
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_RXD_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_TXD_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD );
-+
-+	funcs->configure = htcuniversal_bt_configure;
-+
-+	/* Make sure the LED is off */
-+//	htcuniversal_clear_led(2);
-+
-+	return 0;
-+}
-+
-+static int
-+htcuniversal_bt_remove( struct platform_device *dev )
-+{
-+	struct htcuniversal_bt_funcs *funcs = dev->dev.platform_data;
-+
-+	funcs->configure = NULL;
-+
-+	/* Make sure the LED is off */
-+//	htcuniversal_clear_led(2);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver bt_driver = {
-+	.driver = {
-+		.name     = "htcuniversal_bt",
-+	},
-+	.probe    = htcuniversal_bt_probe,
-+	.remove   = htcuniversal_bt_remove,
-+};
-+
-+module_param(use_led, uint, 0);
-+
-+static int __init
-+htcuniversal_bt_init( void )
-+{
-+	printk(KERN_NOTICE "htcuniversal Bluetooth Driver\n");
-+	return platform_driver_register( &bt_driver );
-+}
-+
-+static void __exit
-+htcuniversal_bt_exit( void )
-+{
-+	platform_driver_unregister( &bt_driver );
-+}
-+
-+module_init( htcuniversal_bt_init );
-+module_exit( htcuniversal_bt_exit );
-+
-+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC");
-+MODULE_DESCRIPTION("HTC Universal Bluetooth Support Driver");
-+MODULE_LICENSE("GPL");
-+
-+/* vim600: set noexpandtab sw=8 ts=8 :*/
-+
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,17 @@
-+/*
-+ * Bluetooth support file for calling bluetooth configuration functions
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-06	Todd Blumer             Initial Revision
-+ */
-+
-+#ifndef _HTCUNIVERSAL_BT_H
-+#define _HTCUNIVERSAL_BT_H
-+
-+struct htcuniversal_bt_funcs {
-+	void (*configure) ( int state );
-+};
-+
-+
-+#endif
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,87 @@
-+/*
-+ * Buttons driver for HTC Universal
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.
-+ *
-+ * Copyright (C) 2005 Pawel Kolodziejski
-+ * Copyright (C) 2003 Joshua Wise
-+ *
-+ */
-+
-+#include <linux/input.h>
-+#include <linux/input_pda.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware/asic3_keys.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+static struct asic3_keys_button asic3_buttons[] = {
-+//{KEY_SCREEN,		ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N,	1, 	"screen_cover", EV_SW},
-+//{KEY_SWITCHVIDEOMODE,	ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N,		1, 	"clamshell_rotate", EV_SW},
-+//{KEY_KBDILLUMTOGGLE,	ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR,	1, 	"night_sensor", EV_SW},
-+{SW_LID,		ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N,	1, 	"screen_cover", EV_SW},
-+{SW_TABLET_MODE,	ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N,		1, 	"clamshell_rotate", EV_SW},
-+//{SW_NIGHT_SENSOR,	ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR,	1, 	"night_sensor", EV_SW},
-+{KEY_F10,		ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_BACKLIGHT_N,	1, 	"backlight_button"},
-+{KEY_RECORD,		ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_RECORD_N,	1, 	"record_button"},
-+{KEY_CAMERA,		ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_CAMERA_N,	1, 	"camera_button"},
-+{KEY_VOLUMEDOWN,	ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_UP_N,		1, 	"volume_slider_down"},
-+{KEY_VOLUMEUP,		ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_DOWN_N,		1, 	"volume_slider_up"},
-+{KEY_KPENTER,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_OK_N,		1, 	"select"},
-+{KEY_RIGHT,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_RIGHT_N,		1, 	"right"},
-+{KEY_LEFT,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_LEFT_N,		1, 	"left"},
-+{KEY_DOWN,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_DOWN_N,		1, 	"down"},
-+{KEY_UP,		ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_UP_N,		1, 	"up"},
-+};
-+
-+static struct asic3_keys_platform_data asic3_keys_data = {
-+        .buttons = asic3_buttons,
-+        .nbuttons = ARRAY_SIZE(asic3_buttons),
-+        .asic3_dev = &htcuniversal_asic3.dev,
-+};
-+
-+static struct platform_device htcuniversal_keys_asic3 = {
-+        .name = "asic3-keys",
-+        .dev = { .platform_data = &asic3_keys_data, }
-+};
-+
-+static int __init htcuniversal_buttons_probe(struct platform_device *dev)
-+{
-+	platform_device_register(&htcuniversal_keys_asic3);
-+	return 0;
-+}
-+
-+static struct platform_driver htcuniversal_buttons_driver = {
-+	.driver		= {
-+	    .name       = "htcuniversal_buttons",
-+	},
-+	.probe          = htcuniversal_buttons_probe,
-+};
-+
-+static int __init htcuniversal_buttons_init(void)
-+{
-+	if (!machine_is_htcuniversal())
-+		return -ENODEV;
-+
-+	return platform_driver_register(&htcuniversal_buttons_driver);
-+}
-+
-+static void __exit htcuniversal_buttons_exit(void)
-+{
-+	platform_driver_unregister(&htcuniversal_buttons_driver);
-+}
-+
-+module_init(htcuniversal_buttons_init);
-+module_exit(htcuniversal_buttons_exit);
-+
-+MODULE_AUTHOR ("Joshua Wise, Pawel Kolodziejski, Paul Sokolosvky");
-+MODULE_DESCRIPTION ("Buttons support for HTC Universal");
-+MODULE_LICENSE ("GPL");
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,226 @@
-+/* Core Hardware driver for Hx4700 (Serial, ASIC3, EGPIOs)
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-03-29   Todd Blumer             Converted  basic structure to support hx4700
-+ * 2005-04-30	Todd Blumer		Add IRDA code from H2200
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/pm.h>
-+#include <linux/irq.h>
-+
-+#include <asm/io.h>
-+#include <asm/mach/irq.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxa-pm_ll.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+#include <linux/soc/asic3_base.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+
-+volatile u_int16_t *egpios;
-+u_int16_t egpio_reg;
-+
-+static int htc_bootloader = 0;	/* Is the stock HTC bootloader installed? */
-+
-+/*
-+ * may make sense to put egpios elsewhere, but they're here now
-+ * since they share some of the same address space with the TI WLAN
-+ *
-+ * EGPIO register is write-only
-+ */
-+
-+void
-+htcuniversal_egpio_enable( u_int16_t bits )
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	egpio_reg |= bits;
-+	*egpios = egpio_reg;
-+
-+	local_irq_restore(flags);
-+}
-+EXPORT_SYMBOL_GPL(htcuniversal_egpio_enable);
-+
-+void
-+htcuniversal_egpio_disable( u_int16_t bits )
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	egpio_reg &= ~bits;
-+	*egpios = egpio_reg;
-+
-+	local_irq_restore(flags);
-+}
-+EXPORT_SYMBOL_GPL(htcuniversal_egpio_disable);
-+
-+#ifdef CONFIG_PM
-+
-+//void htcuniversal_ll_pm_init(void);
-+
-+static int htcuniversal_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	/* Turn off external clocks here, because htcuniversal_power and asic3_mmc
-+	 * scared to do so to not hurt each other. (-5 mA) */
-+
-+
-+	/* 0x20c2 is HTC clock value
-+	 * CLOCK_CDEX_SOURCE		2
-+	 * CLOCK_CDEX_SPI		0
-+	 * CLOCK_CDEX_OWM		0
-+	 *
-+	 * CLOCK_CDEX_PWM0		0
-+	 * CLOCK_CDEX_PWM1		0
-+	 * CLOCK_CDEX_LED0		1
-+	 * CLOCK_CDEX_LED1		1
-+	 *
-+	 * CLOCK_CDEX_LED2		0
-+	 * CLOCK_CDEX_SD_HOST		0
-+	 * CLOCK_CDEX_SD_BUS		0
-+	 * CLOCK_CDEX_SMBUS		0
-+	 *
-+	 * CLOCK_CDEX_CONTROL_CX	0
-+	 * CLOCK_CDEX_EX0		1
-+	 * CLOCK_CDEX_EX1		0
-+	 * */
-+	asic3_set_clock_cdex(&htcuniversal_asic3.dev, 0xffff, CLOCK_CDEX_SOURCE1
-+	                                                     |CLOCK_CDEX_LED0
-+	                                                     |CLOCK_CDEX_LED1
-+	                                                     |CLOCK_CDEX_LED2
-+	                                                     |CLOCK_CDEX_EX0
-+	                                                     |CLOCK_CDEX_EX1);
-+
-+	*egpios = 0;	/* turn off all egpio power */
-+
-+	/* Wake up enable. */
-+	PWER =    PWER_GPIO0
-+		| PWER_GPIO1 /* reset */
-+		| PWER_GPIO9 /* USB */
-+		| PWER_GPIO10 /* AC on USB */
-+		| PWER_GPIO14 /* ASIC3 mux */
-+		| PWER_RTC;
-+	/* Wake up on falling edge. */
-+	PFER =    PWER_GPIO0
-+		| PWER_GPIO1
-+		| PWER_GPIO9
-+		| PWER_GPIO10
-+		| PWER_GPIO14;
-+
-+	/* Wake up on rising edge. */
-+	PRER =    PWER_GPIO0
-+		| PWER_GPIO1
-+		| PWER_GPIO9
-+		| PWER_GPIO10;
-+	/* 3.6864 MHz oscillator power-down enable */
-+	PCFR = PCFR_OPDE | PCFR_PI2CEN | PCFR_GPROD | PCFR_GPR_EN;
-+
-+	PGSR0 = 0x09088004;
-+	PGSR1 = 0x00020002;
-+	PGSR2 = 0x8001c000;
-+	PGSR3 = 0x00106284;
-+
-+	PSLR  = 0xcc000000;
-+
-+#if 0
-+	/*
-+	 * If we're using bootldr and not the stock HTC bootloader,
-+	 * we want to wake up periodically to see if the charge is full while
-+	 * it is suspended.  We do this with the OS timer 4 in the pxa270.
-+	 */
-+	if (!htc_bootloader) {
-+		OMCR4 = 0x4b;   /* Periodic, self-resetting, 1-second timer */
-+		OSMR4 = 5;      /* Wake up bootldr after x seconds so it can
-+				   figure out what to do with the LEDs. */
-+		OIER |= 0x10;   /* Enable interrupt source for Timer 4 */
-+		OSCR4 = 0;      /* This starts the timer */
-+	}
-+#endif
-+
-+	asic3_set_extcf_select(&htcuniversal_asic3.dev, ASIC3_EXTCF_OWM_EN, 0);
-+
-+	return 0;
-+}
-+
-+static int htcuniversal_resume(struct platform_device *dev)
-+{
-+	htcuniversal_egpio_enable(0);
-+
-+	return 0;
-+}
-+#else
-+#   define htcuniversal_suspend NULL
-+#   define htcuniversal_resume NULL
-+#endif
-+
-+static int
-+htcuniversal_core_probe( struct platform_device *dev )
-+{
-+
-+	printk( KERN_NOTICE "HTC Universal Core Hardware Driver\n" );
-+
-+	egpios = (volatile u_int16_t *)ioremap_nocache(HTCUNIVERSAL_EGPIO_BASE, sizeof *egpios );
-+	if (!egpios)
-+		return -ENODEV;
-+	else
-+	 printk( KERN_NOTICE "HTC Universal Core: egpio at phy=0x%8.8x is at virt=0x%p\n",
-+	  HTCUNIVERSAL_EGPIO_BASE, egpios );
-+
-+	printk("Using stock HTC first stage bootloader\n");
-+	htc_bootloader = 1;
-+
-+//	htcuniversal_ll_pm_init();
-+
-+	return 0;
-+}
-+
-+static int
-+htcuniversal_core_remove( struct platform_device *dev )
-+{
-+
-+	if (egpios != NULL)
-+		iounmap( (void *)egpios );
-+
-+	return 0;
-+}
-+
-+static struct platform_driver htcuniversal_core_driver = {
-+	.driver = {
-+		.name     = "htcuniversal_core",
-+	},
-+	.probe    = htcuniversal_core_probe,
-+	.remove   = htcuniversal_core_remove,
-+	.suspend  = htcuniversal_suspend,
-+	.resume   = htcuniversal_resume,
-+};
-+
-+static int __init
-+htcuniversal_core_init( void )
-+{
-+	return platform_driver_register( &htcuniversal_core_driver );
-+}
-+
-+
-+static void __exit
-+htcuniversal_core_exit( void )
-+{
-+	platform_driver_unregister( &htcuniversal_core_driver );
-+}
-+
-+module_init( htcuniversal_core_init );
-+module_exit( htcuniversal_core_exit );
-+
-+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC");
-+MODULE_DESCRIPTION("HTC Universal Core Hardware Driver");
-+MODULE_LICENSE("GPL");
-+
-+/* vim600: set noexpandtab sw=8 ts=8 :*/
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,212 @@
-+/*
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ * History:
-+ *
-+ * 2004-03-01   Eddi De Pieri      Adapted for htcuniversal using h3900_lcd.c
-+ * 2004         Shawn Anderson     Lcd hacking on htcuniversal
-+ * see h3900_lcd.c for more history.
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <asm/arch/hardware.h>  /* for pxa-regs.h (__REG) */
-+#include <linux/platform_device.h>
-+#include <asm/arch/pxa-regs.h>  /* LCCR[0,1,2,3]* */
-+#include <asm/arch/bitfield.h>  /* for pxa-regs.h (Fld, etc) */
-+#include <asm/arch/pxafb.h>     /* pxafb_mach_info, set_pxa_fb_info */
-+#include <asm/mach-types.h>     /* machine_is_htcuniversal */
-+#include <linux/lcd.h>          /* lcd_device */
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+
-+static int saved_lcdpower=-1;
-+
-+static int powerup_lcd(void)
-+{
-+	printk( KERN_INFO "htcuniversal powerup_lcd: called\n");
-+
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR1_ON, 0);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR2_ON, 0);
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_LCD_PWR3_ON, 0);
-+		asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_LCD_PWR4_ON, 0);
-+		asic3_set_gpio_out_a(&htcuniversal_asic3.dev, 1<<GPIOA_LCD_PWR5_ON, 0);
-+#if 1
-+		LCCR4|=LCCR4_PCDDIV;
-+#endif
-+		pxa_set_cken(CKEN_LCD, 0);
-+
-+		mdelay(100);
-+		asic3_set_gpio_out_a(&htcuniversal_asic3.dev, 1<<GPIOA_LCD_PWR5_ON, 1<<GPIOA_LCD_PWR5_ON);
-+		mdelay(5);
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_LCD_PWR3_ON, 1<<GPIOB_LCD_PWR3_ON);
-+		mdelay(2);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR1_ON, 1<<GPIOC_LCD_PWR1_ON);
-+		mdelay(2);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR2_ON, 1<<GPIOC_LCD_PWR2_ON);
-+		mdelay(20);
-+		asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_LCD_PWR4_ON, 1<<GPIOD_LCD_PWR4_ON);
-+		mdelay(1);
-+		pxa_set_cken(CKEN_LCD, 1);
-+
-+		SET_HTCUNIVERSAL_GPIO(LCD1,1);
-+		SET_HTCUNIVERSAL_GPIO(LCD2,1);
-+ return 0;
-+}
-+
-+static int powerdown_lcd(void)
-+{
-+	printk( KERN_INFO "htcuniversal powerdown_lcd: called\n");
-+
-+#if 1
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR2_ON, 0);
-+		mdelay(100);
-+		asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_LCD_PWR4_ON, 0);
-+		mdelay(10);
-+		asic3_set_gpio_out_a(&htcuniversal_asic3.dev, 1<<GPIOA_LCD_PWR5_ON, 0);
-+		mdelay(1);
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_LCD_PWR3_ON, 0);
-+		mdelay(1);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR1_ON, 0);
-+		pxa_set_cken(CKEN_LCD, 0);
-+
-+		SET_HTCUNIVERSAL_GPIO(LCD1,0);
-+		SET_HTCUNIVERSAL_GPIO(LCD2,0);
-+#else
-+		pxa_set_cken(CKEN_LCD, 0);
-+
-+		SET_HTCUNIVERSAL_GPIO(LCD1,0);
-+		SET_HTCUNIVERSAL_GPIO(LCD2,0);
-+
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR2_ON, 0);
-+		mdelay(100);
-+		asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_LCD_PWR4_ON, 0);
-+		mdelay(10);
-+		asic3_set_gpio_out_a(&htcuniversal_asic3.dev, 1<<GPIOA_LCD_PWR5_ON, 0);
-+		mdelay(1);
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_LCD_PWR3_ON, 0);
-+		mdelay(1);
-+		asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<<GPIOC_LCD_PWR1_ON, 0);
-+#endif
-+ return 0;
-+}
-+
-+static int htcuniversal_lcd_set_power(struct lcd_device *lm, int power)
-+{
-+	 /* Enable or disable power to the LCD (0: on; 4: off) */
-+
-+	if ( power < 1 ) {
-+
-+	powerup_lcd();
-+
-+	} else {
-+
-+	powerdown_lcd();
-+
-+	}
-+
-+	saved_lcdpower=power;
-+
-+	return 0;
-+}
-+
-+static int htcuniversal_lcd_get_power(struct lcd_device *lm)
-+{
-+	/* Get the LCD panel power status (0: full on, 1..3: controller
-+	 * power on, flat panel power off, 4: full off) */
-+
-+	if (saved_lcdpower == -1)
-+	{
-+	 htcuniversal_lcd_set_power(lm, 4);
-+	 saved_lcdpower=4;
-+	}
-+
-+ return saved_lcdpower;
-+}
-+
-+static struct lcd_ops htcuniversal_lcd_properties =
-+{
-+	.get_power      = htcuniversal_lcd_get_power,
-+	.set_power      = htcuniversal_lcd_set_power,
-+};
-+
-+static struct lcd_device *htcuniversal_lcd_dev;
-+
-+static int htcuniversal_lcd_probe(struct platform_device * dev)
-+{
-+	htcuniversal_lcd_dev = lcd_device_register("pxa2xx-fb", &dev->dev, NULL,
-+			&htcuniversal_lcd_properties);
-+	if (IS_ERR(htcuniversal_lcd_dev)) {
-+		printk("htcuniversal_lcd_probe: error registering devices\n");
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int htcuniversal_lcd_remove(struct platform_device * dev)
-+{
-+	htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4);
-+	lcd_device_unregister(htcuniversal_lcd_dev);
-+
-+	return 0;
-+}
-+
-+static int htcuniversal_lcd_suspend(struct platform_device * dev, pm_message_t state)
-+{
-+//	printk("htcuniversal_lcd_suspend: called.\n");
-+	htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4);
-+	return 0;
-+}
-+
-+static int htcuniversal_lcd_resume(struct platform_device * dev)
-+{
-+//	printk("htcuniversal_lcd_resume: called.\n");
-+
-+	/* */
-+#if 1
-+	LCCR4|=LCCR4_PCDDIV;
-+#endif
-+
-+	htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 0);
-+	return 0;
-+}
-+
-+static struct platform_driver htcuniversal_lcd_driver = {
-+	.driver = {
-+		.name     = "htcuniversal_lcd",
-+	},
-+	.probe    = htcuniversal_lcd_probe,
-+	.remove   = htcuniversal_lcd_remove,
-+	.suspend  = htcuniversal_lcd_suspend,
-+	.resume   = htcuniversal_lcd_resume,
-+};
-+
-+static int htcuniversal_lcd_init(void)
-+{
-+	if (!machine_is_htcuniversal())
-+		return -ENODEV;
-+
-+	return platform_driver_register(&htcuniversal_lcd_driver);
-+}
-+
-+static void htcuniversal_lcd_exit(void)
-+{
-+	lcd_device_unregister(htcuniversal_lcd_dev);
-+	platform_driver_unregister(&htcuniversal_lcd_driver);
-+}
-+
-+module_init(htcuniversal_lcd_init);
-+module_exit(htcuniversal_lcd_exit);
-+
-+MODULE_AUTHOR("xanadux.org");
-+MODULE_DESCRIPTION("Framebuffer driver for HTC Universal");
-+MODULE_LICENSE("GPL");
-+
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,167 @@
-+
-+/* Phone interface driver for Qualcomm MSM6250 on HTC Universal
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-04-21   Todd Blumer             Created.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/arch/serial.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+#include "htcuniversal_phone.h"
-+
-+static void phone_reset(void)
-+{
-+	asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_RESET2, 0);
-+
-+	SET_HTCUNIVERSAL_GPIO(PHONE_RESET,0);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 0);
-+	mdelay(1);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 1<<GPIOD_BB_RESET1);
-+	mdelay(20);
-+	SET_HTCUNIVERSAL_GPIO(PHONE_RESET,1);
-+	mdelay(200);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 0);
-+}
-+
-+static void phone_off(void)
-+{
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 1<<GPIOD_BB_RESET1);
-+	mdelay(2000);
-+	asic3_set_gpio_out_d(&htcuniversal_asic3.dev, 1<<GPIOD_BB_RESET1, 0);
-+
-+	asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_RESET2, 1<<GPIOB_BB_RESET2);
-+	SET_HTCUNIVERSAL_GPIO(PHONE_OFF,0);
-+}
-+
-+static void
-+htcuniversal_phone_configure( int state )
-+{
-+	int tries;
-+	unsigned short statusb;
-+
-+	printk( KERN_NOTICE "htcuniversal configure phone: %d\n", state );
-+	switch (state) {
-+
-+	case PXA_UART_CFG_PRE_STARTUP:
-+		break;
-+
-+	case PXA_UART_CFG_POST_STARTUP:
-+		/* pre-serial-up hardware configuration */
-+
-+		SET_HTCUNIVERSAL_GPIO(PHONE_START,0);   /* "bootloader" */
-+		SET_HTCUNIVERSAL_GPIO(PHONE_UNKNOWN,0); /* not used     */
-+		SET_HTCUNIVERSAL_GPIO(PHONE_OFF,0);     /* PHONE_OFF    */
-+
-+		phone_reset();
-+
-+		SET_HTCUNIVERSAL_GPIO(PHONE_START,1); /* phone */
-+
-+		phone_reset();
-+
-+		asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_READY, 0);
-+		asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_UNKNOWN3, 0);
-+
-+		/*
-+		 */
-+		tries = 0;
-+		do {
-+			mdelay(10);
-+			statusb = asic3_get_gpio_status_b( &htcuniversal_asic3.dev );
-+		} while ( (statusb & (1<<GPIOB_UMTS_DCD)) == 0 && tries++ < 200);
-+
-+		printk("UMTS_DCD tries=%d of 200\n",tries);
-+
-+		tries = 0;
-+		do {
-+			SET_HTCUNIVERSAL_GPIO(PHONE_OFF,1);
-+			mdelay(10);
-+			SET_HTCUNIVERSAL_GPIO(PHONE_OFF,0);
-+			mdelay(20);
-+			statusb = asic3_get_gpio_status_b( &htcuniversal_asic3.dev );
-+		} while ( (statusb & (1<<GPIOB_BB_READY)) == 0 && tries++ < 200);
-+
-+		printk("BB_READY tries=%d of 200\n",tries);
-+
-+		break;
-+
-+	case PXA_UART_CFG_PRE_SHUTDOWN:
-+
-+			phone_off();
-+
-+		break;
-+
-+	default:
-+		break;
-+	}
-+}
-+
-+
-+static int
-+htcuniversal_phone_probe( struct platform_device *dev )
-+{
-+	struct htcuniversal_phone_funcs *funcs = dev->dev.platform_data;
-+
-+	/* configure phone UART */
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD );
-+	pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD );
-+
-+	funcs->configure = htcuniversal_phone_configure;
-+
-+	return 0;
-+}
-+
-+static int
-+htcuniversal_phone_remove( struct platform_device *dev )
-+{
-+	struct htcuniversal_phone_funcs *funcs = dev->dev.platform_data;
-+
-+	funcs->configure = NULL;
-+
-+	asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_READY, 1<<GPIOB_BB_READY);
-+	asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_BB_UNKNOWN3, 1<<GPIOB_BB_UNKNOWN3);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver phone_driver = {
-+	.driver   = {
-+		.name     = "htcuniversal_phone",
-+	},
-+	.probe    = htcuniversal_phone_probe,
-+	.remove   = htcuniversal_phone_remove,
-+};
-+
-+static int __init
-+htcuniversal_phone_init( void )
-+{
-+	printk(KERN_NOTICE "htcuniversal Phone Driver\n");
-+	return platform_driver_register( &phone_driver );
-+}
-+
-+static void __exit
-+htcuniversal_phone_exit( void )
-+{
-+	platform_driver_unregister( &phone_driver );
-+}
-+
-+module_init( htcuniversal_phone_init );
-+module_exit( htcuniversal_phone_exit );
-+
-+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC");
-+MODULE_DESCRIPTION("HTC Universal Phone Support Driver");
-+MODULE_LICENSE("GPL");
-+
-+/* vim600: set noexpandtab sw=8 ts=8 :*/
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,16 @@
-+/*
-+ * Bluetooth support file for calling bluetooth configuration functions
-+ *
-+ * Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ * 2005-06	Todd Blumer             Initial Revision
-+ */
-+
-+#ifndef _HTCUNIVERSAL_PHONE_H
-+#define _HTCUNIVERSAL_PHONE_H
-+
-+struct htcuniversal_phone_funcs {
-+	void (*configure) ( int state );
-+};
-+
-+#endif
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,69 @@
-+/*
-+ * MyPal 716 power management support for the original HTC IPL in DoC G3
-+ *
-+ * Use consistent with the GNU GPL is permitted, provided that this
-+ * copyright notice is preserved in its entirety in all copies and
-+ * derived works.
-+ *
-+ * Copyright (C) 2005 Pawel Kolodziejski
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/pm.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxa-pm_ll.h>
-+
-+#ifdef CONFIG_PM
-+
-+static u32 *addr_a0040000;
-+static u32 *addr_a0040004;
-+static u32 *addr_a0040008;
-+static u32 *addr_a004000c;
-+
-+static u32 save_a0040000;
-+static u32 save_a0040004;
-+static u32 save_a0040008;
-+static u32 save_a004000c;
-+
-+static void htcuniversal_pxa_ll_pm_suspend(unsigned long resume_addr)
-+{
-+	save_a0040000 = *addr_a0040000;
-+	save_a0040004 = *addr_a0040004;
-+	save_a0040008 = *addr_a0040008;
-+	save_a004000c = *addr_a004000c;
-+
-+	/* jump to PSPR */
-+	*addr_a0040000 = 0xe3a00101; // mov r0, #0x40000000
-+	*addr_a0040004 = 0xe380060f; // orr r0, r0, #0x0f000000
-+	*addr_a0040008 = 0xe3800008; // orr r0, r0, #8
-+	*addr_a004000c = 0xe590f000; // ldr pc, [r0]
-+}
-+
-+static void htcuniversal_pxa_ll_pm_resume(void)
-+{
-+	*addr_a0040000 = save_a0040000;
-+	*addr_a0040004 = save_a0040004;
-+	*addr_a0040008 = save_a0040008;
-+	*addr_a004000c = save_a004000c;
-+}
-+
-+static struct pxa_ll_pm_ops htcuniversal_ll_pm_ops = {
-+	.suspend = htcuniversal_pxa_ll_pm_suspend,
-+	.resume  = htcuniversal_pxa_ll_pm_resume,
-+};
-+
-+void htcuniversal_ll_pm_init(void) {
-+	addr_a0040000 = phys_to_virt(0xa0040000);
-+	addr_a0040004 = phys_to_virt(0xa0040004);
-+	addr_a0040008 = phys_to_virt(0xa0040008);
-+	addr_a004000c = phys_to_virt(0xa004000c);
-+
-+	pxa_pm_set_ll_ops(&htcuniversal_ll_pm_ops);
-+}
-+#endif /* CONFIG_PM */
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,97 @@
-+/*
-+ * pda_power driver for HTC Universal
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or (at
-+ * your option) any later version.
-+ *
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+#include <linux/pda_power.h>
-+#include <linux/soc/asic3_base.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+static void charge_on(int flags)
-+{
-+        asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<<GPIOB_CHARGE_EN, 0);
-+}
-+
-+static int ac_on(void)
-+{
-+ return (GET_HTCUNIVERSAL_GPIO(POWER_DET) == 0);
-+}
-+
-+static int usb_on(void)
-+{
-+ return (GET_HTCUNIVERSAL_GPIO(USB_DET) == 0);
-+}
-+
-+static char *supplicants[] = {
-+	"ds2760-battery.0", "backup-battery"
-+};
-+
-+static struct pda_power_pdata power_pdata = {
-+	.is_ac_online	= ac_on,
-+	.is_usb_online	= usb_on,
-+	.set_charge	= charge_on,
-+	.supplied_to = supplicants,
-+	.num_supplicants = ARRAY_SIZE(supplicants),
-+};
-+
-+static struct resource power_resources[] = {
-+	[0] = {
-+		.name	= "ac",
-+		.start	= HTCUNIVERSAL_IRQ(POWER_DET),
-+		.end	= HTCUNIVERSAL_IRQ(POWER_DET),
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
-+	},
-+	[1] = {
-+		.name	= "usb",
-+		.start	= HTCUNIVERSAL_IRQ(USB_DET),
-+		.end	= HTCUNIVERSAL_IRQ(USB_DET),
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
-+	},
-+};
-+
-+static void dev_release(struct device *dev)
-+{
-+	return;
-+}
-+
-+static struct platform_device power_dev =
-+{
-+	.name		= "pda-power",
-+	.id		= -1,
-+	.resource	= power_resources,
-+	.num_resources	= ARRAY_SIZE(power_resources),
-+	.dev =
-+	 {
-+		.platform_data	= &power_pdata,
-+		.release	= dev_release,
-+	 },
-+};
-+
-+static int htcuniversal_power_init(void)
-+{
-+ return platform_device_register(&power_dev);
-+}
-+
-+static void htcuniversal_power_exit(void)
-+{
-+	platform_device_unregister(&power_dev);
-+
-+	return;
-+}
-+
-+module_init(htcuniversal_power_init);
-+module_exit(htcuniversal_power_exit);
-+
-+MODULE_DESCRIPTION("Power driver for HTC Universal");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,490 @@
-+/* Touch screen driver for the TI something-or-other
-+ *
-+ * Copyright © 2005 SDG Systems, LLC
-+ *
-+ * Based on code that was based on the SAMCOP driver.
-+ *     Copyright © 2003, 2004 Compaq Computer Corporation.
-+ *
-+ * Use consistent with the GNU GPL is permitted,
-+ * provided that this copyright notice is
-+ * preserved in its entirety in all copies and derived works.
-+ *
-+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-+ * FITNESS FOR ANY PARTICULAR PURPOSE.
-+ *
-+ * Author:  Keith Packard <keith.packard@hp.com>
-+ *          May 2003
-+ *
-+ * Updates:
-+ *
-+ * 2004-02-11   Michael Opdenacker      Renamed names from samcop to shamcop,
-+ *                                      Goal:support HAMCOP and SAMCOP.
-+ * 2004-02-14   Michael Opdenacker      Temporary fix for device id handling
-+ *
-+ * 2005-02-18   Aric Blumer             Converted  basic structure to support hx4700
-+ *
-+ * 2005-06-07   Aric Blumer             Added tssim device handling so we can
-+ *                                      hook in the fbvncserver.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/pm.h>
-+#include <linux/delay.h>
-+#include <linux/input.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/mach/irq.h>
-+#include <asm/io.h>
-+
-+/* remove me */
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+#include <asm/mach-types.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+
-+
-+#include "tsc2046_ts.h"
-+
-+enum touchscreen_state {
-+    STATE_WAIT_FOR_TOUCH,   /* Waiting for a PEN interrupt */
-+    STATE_SAMPLING          /* Actively sampling ADC */
-+};
-+
-+struct touchscreen_data {
-+    enum touchscreen_state state;
-+    struct timer_list      timer;
-+    int                    irq;
-+    struct input_dev       *input;
-+    /* */
-+    int			port;
-+    int			clock;
-+    int			pwrbit_X;
-+    int			pwrbit_Y;
-+    int			(*pen_down)(void);
-+};
-+
-+static unsigned long poll_sample_time   = 10; /* Sample every 10 milliseconds */
-+
-+static struct touchscreen_data *ts_data;
-+
-+static int irqblock;
-+
-+module_param(poll_sample_time, ulong, 0644);
-+MODULE_PARM_DESC(poll_sample_time, "Poll sample time");
-+
-+static inline void
-+report_touchpanel(struct touchscreen_data *ts, int pressure, int x, int y)
-+{
-+    input_report_abs(ts->input, ABS_PRESSURE, pressure);
-+    input_report_abs(ts->input, ABS_X, x);
-+    input_report_abs(ts->input, ABS_Y, y);
-+    input_sync(ts->input);
-+}
-+
-+static void start_read(struct touchscreen_data *touch);
-+
-+static irqreturn_t
-+pen_isr(int irq, void *irq_desc)
-+{
-+    struct touchscreen_data *ts = ts_data;
-+
-+    if(irq == ts->irq /* && !irqblock */) {
-+        irqblock = 1;
-+
-+        /*
-+         * Disable the pen interrupt.  It's reenabled when the user lifts the
-+         * pen.
-+         */
-+        disable_irq(ts->irq);
-+
-+        if (ts->state == STATE_WAIT_FOR_TOUCH) {
-+            ts->state = STATE_SAMPLING;
-+            start_read(ts);
-+        } else {
-+            /* Shouldn't happen */
-+            printk(KERN_ERR "Unexpected ts interrupt\n");
-+        }
-+
-+    }
-+    return IRQ_HANDLED;
-+}
-+
-+static void
-+ssp_init(int port, int clock)
-+{
-+
-+    pxa_set_cken(clock, 0);
-+
-+    pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD);
-+    pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD);
-+    pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD);
-+    pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD);
-+
-+    SET_HTCUNIVERSAL_GPIO(SPI_FRM,1);
-+
-+    /* *** Set up the SPI Registers *** */
-+    SSCR0_P(port) =
-+          SSCR0_EDSS         /* Extended Data Size Select */
-+        | SSCR0_SerClkDiv(7) /* Serial Clock Rate */
-+                             /* Synchronous Serial Enable (Disable for now) */
-+        | SSCR0_Motorola     /* Motorola SPI Interface */
-+        | SSCR0_DataSize(8)  /* Data Size Select  (24-bit) */
-+        ;
-+    SSCR1_P(port) = 0;
-+    SSPSP_P(port) = 0;
-+
-+    /* Clear the Status */
-+    SSSR_P(port)  = SSSR_P(port) & 0x00fcfffc;
-+
-+    /* Now enable it */
-+    SSCR0_P(port) =
-+          SSCR0_EDSS         /* Extended Data Size Select */
-+        | SSCR0_SerClkDiv(7) /* Serial Clock Rate */
-+        | SSCR0_SSE          /* Synchronous Serial Enable */
-+        | SSCR0_Motorola     /* Motorola SPI Interface */
-+        | SSCR0_DataSize(8)  /* Data Size Select  (24-bit) */
-+        ;
-+
-+    pxa_set_cken(clock, 1);
-+}
-+
-+static void
-+start_read(struct touchscreen_data *touch)
-+{
-+    unsigned long inc = (poll_sample_time * HZ) / 1000;
-+    int i;
-+
-+    /* Write here to the serial port. We request X and Y only for now.
-+     * Then we have to wait for poll_sample_time before we read out the serial
-+     * port.  Then, when we read it out, we check to see if the pen is still
-+     * down.  If so, then we issue another request here.
-+     */
-+#define TS_SAMPLES 7
-+
-+    /*
-+     * We do four samples for each, and throw out the highest and lowest, then
-+     * average the other two.
-+     */
-+
-+    for(i = 0; i < TS_SAMPLES; i++) {
-+        while(!(SSSR_P(touch->port) & SSSR_TNF))
-+            ;
-+        /* It's not full. Write the command for X */
-+        SSDR_P(touch->port) = (TSC2046_SAMPLE_X|(touch->pwrbit_X))<<16;
-+    }
-+
-+    for(i = 0; i < TS_SAMPLES; i++) {
-+        while(!(SSSR_P(touch->port) & SSSR_TNF))
-+            ;
-+        /* It's not full. Write the command for Y */
-+        SSDR_P(touch->port)  = (TSC2046_SAMPLE_Y|(touch->pwrbit_Y))<<16;
-+    }
-+
-+    /*
-+     * Enable the timer. We should get an interrupt, but we want keep a timer
-+     * to ensure that we can detect missing data
-+     */
-+    mod_timer(&touch->timer, jiffies + inc);
-+}
-+
-+static void
-+ts_timer_callback(unsigned long data)
-+{
-+    struct touchscreen_data *ts = (struct touchscreen_data *)data;
-+    int x, a[TS_SAMPLES], y;
-+    static int oldx, oldy;
-+    int ssrval;
-+
-+    /*
-+     * Check here to see if there is anything in the SPI FIFO.  If so,
-+     * return it if there has been a change.  If not, then we have a
-+     * timeout.  Generate an erro somehow.
-+     */
-+    ssrval = SSSR_P(ts->port);
-+
-+    if(ssrval & SSSR_RNE) { /* Look at Rx Not Empty bit */
-+        int number_of_entries_in_fifo;
-+
-+        /* The FIFO is not emtpy. Good! Now make sure there are at least two
-+         * entries. (Should be two exactly.) */
-+
-+        number_of_entries_in_fifo = ((ssrval >> 12) & 0xf) + 1;
-+
-+        if(number_of_entries_in_fifo < TS_SAMPLES * 2) {
-+            /* Not ready yet. Come back later. */
-+            unsigned long inc = (poll_sample_time * HZ) / 1000;
-+            mod_timer(&ts->timer, jiffies + inc);
-+            return;
-+        }
-+
-+        if(number_of_entries_in_fifo == TS_SAMPLES * 2) {
-+            int i, j;
-+
-+            for(i = 0; i < TS_SAMPLES; i++) {
-+                a[i] = SSDR_P(ts->port);
-+            }
-+            /* Sort them (bubble) */
-+            for(j = TS_SAMPLES - 1; j > 0; j--) {
-+                for(i = 0; i < j; i++) {
-+                    if(a[i] > a[i + 1]) {
-+                        int tmp;
-+                        tmp    = a[i+1];
-+                        a[i+1] = a[i];
-+                        a[i]   = tmp;
-+                    }
-+                }
-+            }
-+
-+            /* Take the average of the middle two */
-+            /* x = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */
-+            x = a[TS_SAMPLES/2];
-+
-+            for(i = 0; i < TS_SAMPLES; i++) {
-+                a[i] = SSDR_P(ts->port);
-+            }
-+            /* Sort them (bubble) */
-+            for(j = TS_SAMPLES - 1; j > 0; j--) {
-+                for(i = 0; i < j; i++) {
-+                    if(a[i] > a[i + 1]) {
-+                        int tmp;
-+                        tmp    = a[i+1];
-+                        a[i+1] = a[i];
-+                        a[i]   = tmp;
-+                    }
-+                }
-+            }
-+
-+
-+            /* Take the average of the middle two */
-+            /* y = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */
-+            y = a[TS_SAMPLES/2];
-+        } else {
-+            /* We have an error! Too many entries. */
-+            printk(KERN_ERR "TS: Expected %d entries. Got %d\n", TS_SAMPLES*2, number_of_entries_in_fifo);
-+            /* Try to clear the FIFO */
-+            while(number_of_entries_in_fifo--) {
-+                (void)SSDR_P(ts->port);
-+            }
-+
-+            if (ts->pen_down())
-+                start_read(ts);
-+
-+            return;
-+        }
-+    } else {
-+        /* Not ready yet. Come back later. */
-+        unsigned long inc = (poll_sample_time * HZ) / 1000;
-+        mod_timer(&ts->timer, jiffies + inc);
-+        return;
-+    }
-+
-+    /*
-+     * Now we check to see if the pen is still down.  If it is, then call
-+     * start_read().
-+     */
-+    if (ts->pen_down())
-+    {
-+        /* Still down */
-+        if(oldx != x || oldy != y) {
-+            oldx = x;
-+            oldy = y;
-+            report_touchpanel(ts, 1, x, y);
-+        }
-+        start_read(ts);
-+    } else {
-+        /* Up */
-+        report_touchpanel(ts, 0, 0, 0);
-+        irqblock = 0;
-+        ts->state = STATE_WAIT_FOR_TOUCH;
-+        /* Re-enable pen down interrupt */
-+        enable_irq(ts->irq);
-+    }
-+}
-+
-+static int pen_down(void)
-+{
-+ return ( asic3_get_gpio_status_a( &htcuniversal_asic3.dev ) & (1<<GPIOA_TOUCHSCREEN_N)) == 0 ;
-+}
-+
-+static int
-+ts_probe (struct platform_device *dev)
-+{
-+    int retval;
-+    struct touchscreen_data *ts;
-+    struct tsc2046_mach_info *mach = dev->dev.platform_data;
-+
-+    printk("htcuniversal: ts_probe\n");
-+
-+    ts = ts_data = kmalloc (sizeof (*ts), GFP_KERNEL);
-+    if (ts == NULL) {
-+	printk( KERN_NOTICE "htcuniversal_ts: unable to allocate memory\n" );
-+	return -ENOMEM;
-+    }
-+    memset (ts, 0, sizeof (*ts));
-+
-+    ts->input = input_allocate_device();
-+    if (ts->input == NULL) {
-+	printk( KERN_NOTICE "htcuniversal_ts: unable to allocation touchscreen input\n" );
-+	kfree(ts);
-+	return -ENOMEM;
-+    }
-+    ts->input->evbit[0]             = BIT(EV_ABS);
-+    ts->input->absbit[0]            = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
-+    ts->input->absmin[ABS_X]        = 0;
-+    ts->input->absmax[ABS_X]        = 32767;
-+    ts->input->absmin[ABS_Y]        = 0;
-+    ts->input->absmax[ABS_Y]        = 32767;
-+    ts->input->absmin[ABS_PRESSURE] = 0;
-+    ts->input->absmax[ABS_PRESSURE] = 1;
-+
-+    ts->input->name = "htcuniversal_ts";
-+    ts->input->phys =  "touchscreen/htcuniversal_ts";
-+    ts->input->private = ts;
-+
-+    input_register_device(ts->input);
-+
-+    ts->timer.function = ts_timer_callback;
-+    ts->timer.data = (unsigned long)ts;
-+    ts->state = STATE_WAIT_FOR_TOUCH;
-+    init_timer (&ts->timer);
-+
-+    platform_set_drvdata(dev, ts);
-+
-+    ts->port=-1;
-+
-+    if (mach) {
-+        ts->port = mach->port;
-+        ts->clock = mach->clock;
-+        ts->pwrbit_X = mach->pwrbit_X;
-+        ts->pwrbit_Y = mach->pwrbit_Y;
-+
-+        /* static irq */
-+        if (mach->irq)
-+         ts->irq = mach->irq;
-+
-+        if (mach->pen_down)
-+         ts->pen_down=mach->pen_down;
-+    }
-+
-+    if (ts->port == -1)
-+    {
-+     printk("tsc2046: your device is not supported by this driver\n");
-+     return -ENODEV;
-+    }
-+
-+    /* *** Initialize the SSP interface *** */
-+    ssp_init(ts->port, ts->clock);
-+
-+    while(!(SSSR_P(ts->port) & SSSR_TNF))
-+        ;
-+    SSDR_P(ts->port) = (TSC2046_SAMPLE_X|(ts->pwrbit_X))<<16;
-+
-+    for(retval = 0; retval < 100; retval++) {
-+        if(SSSR_P(ts->port) & SSSR_RNE) {
-+            while(SSSR_P(ts->port) & SSSR_RNE) {
-+                (void)SSDR_P(ts->port);
-+            }
-+            break;
-+        }
-+        mdelay(1);
-+    }
-+
-+    if (machine_is_htcuniversal() )
-+    {
-+     ts->irq = asic3_irq_base( &htcuniversal_asic3.dev ) + ASIC3_GPIOA_IRQ_BASE + GPIOA_TOUCHSCREEN_N;
-+     ts->pen_down=pen_down;
-+    }
-+
-+    retval = request_irq(ts->irq, pen_isr, IRQF_DISABLED, "tsc2046_ts", ts);
-+    if(retval) {
-+        printk("Unable to get interrupt\n");
-+        input_unregister_device (ts->input);
-+        return -ENODEV;
-+    }
-+    set_irq_type(ts->irq, IRQ_TYPE_EDGE_FALLING);
-+
-+    return 0;
-+}
-+
-+static int
-+ts_remove (struct platform_device *dev)
-+{
-+    struct touchscreen_data *ts = platform_get_drvdata(dev);
-+
-+    input_unregister_device (ts->input);
-+    del_timer_sync (&ts->timer);
-+    free_irq (ts->irq, ts);
-+    pxa_set_cken(ts->clock, 0);
-+
-+    kfree(ts);
-+    return 0;
-+}
-+
-+static int
-+ts_suspend (struct platform_device *dev, pm_message_t state)
-+{
-+    struct touchscreen_data *ts = platform_get_drvdata(dev);
-+
-+    disable_irq(ts->irq);
-+
-+    printk("htcuniversal_ts2_suspend: called.\n");
-+    return 0;
-+}
-+
-+static int
-+ts_resume (struct platform_device *dev)
-+{
-+    struct touchscreen_data *ts = platform_get_drvdata(dev);
-+
-+    ts->state = STATE_WAIT_FOR_TOUCH;
-+    ssp_init(ts->port, ts->clock);
-+    enable_irq(ts->irq);
-+
-+    printk("htcuniversal_ts2_resume: called.\n");
-+    return 0;
-+}
-+
-+static struct platform_driver ts_driver = {
-+    .probe    = ts_probe,
-+    .remove   = ts_remove,
-+    .suspend  = ts_suspend,
-+    .resume   = ts_resume,
-+    .driver = {
-+		.name = "htcuniversal_ts",
-+	},
-+};
-+
-+
-+static int
-+ts_module_init (void)
-+{
-+    printk(KERN_NOTICE "HTC Universal Touch Screen Driver\n");
-+
-+    return platform_driver_register(&ts_driver);
-+}
-+
-+static void
-+ts_module_cleanup (void)
-+{
-+    platform_driver_unregister (&ts_driver);
-+}
-+
-+module_init(ts_module_init);
-+module_exit(ts_module_cleanup);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC");
-+MODULE_DESCRIPTION("HTC Universal Touch Screen Driver");
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,71 @@
-+
-+/*
-+ *
-+ * htcuniversal_udc.c:
-+ * htcuniversal specific code for the pxa27x usb device controller.
-+ *
-+ * Use consistent with the GNU GPL is permitted.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/udc.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/arch/htcuniversal-gpio.h>
-+#include <asm/arch/htcuniversal-asic.h>
-+
-+static void htcuniversal_udc_command(int cmd)
-+{
-+	switch (cmd) {
-+	case PXA2XX_UDC_CMD_DISCONNECT:
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev,
-+					   1<<GPIOB_USB_PUEN, 0);
-+//		SET_HTCUNIVERSAL_GPIO(USB_PUEN,0);
-+		break;
-+	case PXA2XX_UDC_CMD_CONNECT:
-+		asic3_set_gpio_out_b(&htcuniversal_asic3.dev,
-+					   1<<GPIOB_USB_PUEN,  1<<GPIOB_USB_PUEN);
-+//		SET_HTCUNIVERSAL_GPIO(USB_PUEN,1);
-+		break;
-+	default:
-+		printk("_udc_control: unknown command!\n");
-+		break;
-+	}
-+}
-+
-+static int htcuniversal_udc_is_connected(void)
-+{
-+	return (GET_HTCUNIVERSAL_GPIO(USB_DET) != 0);
-+}
-+
-+static struct pxa2xx_udc_mach_info htcuniversal_udc_info __initdata = {
-+	.udc_is_connected = htcuniversal_udc_is_connected,
-+	.udc_command      = htcuniversal_udc_command,
-+};
-+
-+static int htcuniversal_udc_probe(struct platform_device * dev)
-+{
-+	asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1<<GPIOB_USB_PUEN, 1<<GPIOB_USB_PUEN);
-+
-+	pxa_set_udc_info(&htcuniversal_udc_info);
-+	return 0;
-+}
-+
-+static struct platform_driver htcuniversal_udc_driver = {
-+	.driver	  = {
-+		.name     = "htcuniversal_udc",
-+	},
-+	.probe    = htcuniversal_udc_probe,
-+};
-+
-+static int __init htcuniversal_udc_init(void)
-+{
-+	return platform_driver_register(&htcuniversal_udc_driver);
-+}
-+
-+module_init(htcuniversal_udc_init);
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,20 @@
-+/*
-+ * temporary TSC2046 touchscreen hack
-+ */
-+
-+#ifndef _TSC2046_TS_H
-+#define _TSC2046_TS_H
-+
-+struct tsc2046_mach_info {
-+    int port;
-+    int clock;
-+    int pwrbit_X;
-+    int pwrbit_Y;
-+    int irq;
-+    int (*pen_down)(void);
-+};
-+
-+#define TSC2046_SAMPLE_X 0xd0
-+#define TSC2046_SAMPLE_Y 0x90
-+
-+#endif
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.26-rc4.orig/arch/arm/mach-pxa/Kconfig	2008-06-01 18:49:43.000000000 +0100
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/Kconfig	2008-06-01 18:49:45.000000000 +0100
-@@ -147,6 +147,14 @@
- 	select PXA27x
- 	select IWMMXT
- 
-+config MACH_HTCUNIVERSAL
-+	bool "HTC Universal"
-+	select PXA27x
-+	help
-+	  Say Y here if you intend to run this kernel on a
-+	  HTC Universal. Currently there is only basic support
-+	  for this PDA.
-+
- endchoice
- 
- choice
-@@ -204,6 +212,86 @@
- 
- endif
- 
-+if MACH_HTCUNIVERSAL
-+
-+menu "HTC Universal support"
-+
-+config HTCUNIVERSAL_CORE
-+        tristate "HTC Universal core"
-+        depends on MACH_HTCUNIVERSAL
-+        help
-+          This selection enables HTC Universal core support.
-+
-+config HTCUNIVERSAL_UDC
-+        bool "USB Device Controller support"
-+        depends on MACH_HTCUNIVERSAL && HTC_ASIC3 && USB_PXA27X
-+        help
-+          Enables HTC Universal specific USB detection
-+
-+config HTCUNIVERSAL_POWER
-+        tristate "HTC Universal power"
-+        depends on MACH_HTCUNIVERSAL && HTC_ASIC3
-+        help
-+          This selection enables HTC Universal power monitoring
-+	            hardware support (through ASIC3).
-+
-+config HTCUNIVERSAL_BACKLIGHT
-+	bool "HTC Universal Backlight"
-+	depends on MACH_HTCUNIVERSAL && HTC_ASIC3 && BACKLIGHT_CLASS_DEVICE
-+	help
-+	  This driver provides support for changing power and brightness
-+	  on HTC Universal LCD backlight.
-+
-+config HTCUNIVERSAL_LCD
-+	tristate "HTC Universal LCD"
-+	depends on MACH_HTCUNIVERSAL && HTC_ASIC3 && LCD_CLASS_DEVICE
-+	help
-+	  This driver provides support for changing power and brightness
-+	  on HTC Universal LCD display.
-+
-+config HTCUNIVERSAL_TS2
-+	tristate "HTC Universal Touchscreen (old)"
-+	depends on MACH_HTCUNIVERSAL && HTC_ASIC3
-+	help
-+	  Enable support for the HTC Universal Touchscreen Panel.
-+
-+config HTCUNIVERSAL_BUTTONS
-+        tristate "HTC Universal buttons support"
-+        depends on MACH_HTCUNIVERSAL && HTC_ASIC3
-+
-+config HTCUNIVERSAL_BLUETOOTH
-+	tristate "HTC Universal Bluetooth"
-+	depends on MACH_HTCUNIVERSAL && HTCUNIVERSAL_CORE && HTC_ASIC3
-+	help
-+	  Enables support for the TI BRF6150 Bluetooth Module
-+	  in the HTC Universal.
-+
-+config HTCUNIVERSAL_ASIC3_LEDS
-+	tristate "HTC Universal ASIC3 LED support"
-+	select LEDS_ASIC3
-+	depends on MACH_HTCUNIVERSAL && HTCUNIVERSAL_CORE && HTC_ASIC3
-+	---help---
-+	Support for right (colors red+green+(amber)) and left (green+blue) led
-+	Off/on hook keys LED backlight
-+	Keyboard backlight
-+	Vibra
-+	Flashlight
-+
-+config HTCUNIVERSAL_PHONE
-+	tristate "HTC Universal Phone"
-+	depends on MACH_HTCUNIVERSAL && HTCUNIVERSAL_CORE && HTC_ASIC3
-+	help
-+	  Enables support for the Qualcomm MSM6520 Phone Module
-+	  in the HTC Universal.
-+
-+config HTCUNIVERSAL_AK4641
-+	depends on SND && I2C
-+	tristate "AK4641 chipset support"
-+
-+endmenu
-+
-+endif
-+
- endmenu
- 
- config MACH_POODLE
-@@ -289,4 +377,3 @@
- 	depends on (PXA25x || PXA27x) && INPUT
- 
- endif
--
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/Makefile
-===================================================================
---- linux-2.6.26-rc4.orig/arch/arm/mach-pxa/Makefile	2008-06-01 18:49:43.000000000 +0100
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/Makefile	2008-06-01 18:50:46.000000000 +0100
-@@ -36,6 +36,7 @@
- obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
- obj-$(CONFIG_MACH_TOSA)		+= tosa.o
- obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
-+obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal/
- obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
- obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
- 
-Index: linux-2.6.26-rc4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/leds/Kconfig	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/leds/Kconfig	2008-06-01 18:49:45.000000000 +0100
-@@ -147,6 +147,13 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called leds-clevo-mail.
- 
-+config LEDS_ASIC3
-+	tristate "LED Support for the HTC ASIC3 chip"
-+	depends on LEDS_CLASS && HTC_ASIC3
-+	help
-+	  This option enables support for the LEDs connected to the
-+	  HTC ASIC3 chip.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
-Index: linux-2.6.26-rc4/drivers/leds/leds-asic3.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/drivers/leds/leds-asic3.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * LEDs support for HTC ASIC3 devices.
-+ *
-+ * Copyright (c) 2006  Anton Vorontsov <cbou@mail.ru>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include "leds.h"
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware/asic3_leds.h>
-+
-+#ifdef DEBUG
-+#define dbg(msg, ...) printk(msg, __VA_ARGS__)
-+#else
-+#define dbg(msg, ...)
-+#endif
-+
-+static
-+void asic3_leds_set(struct led_classdev *led_cdev, enum led_brightness b)
-+{
-+	struct asic3_led *led = container_of(led_cdev, struct asic3_led,
-+	                                     led_cdev);
-+	struct asic3_leds_machinfo *machinfo = led->machinfo;
-+	struct device *asic3_dev = &machinfo->asic3_pdev->dev;
-+
-+	dbg("%s:%s %d(%d)-%s %d\n", __FILE__, __FUNCTION__, led->hw_num,
-+	    led->gpio_num, led->led_cdev.name, b);
-+
-+	if (led->hw_num == -1) {
-+		asic3_gpio_set_value(asic3_dev, led->gpio_num, b);
-+		return;
-+	}
-+
-+	if (b == LED_OFF) {
-+		asic3_set_led(asic3_dev, led->hw_num, 0, 16, 6);
-+		asic3_set_gpio_out_c(asic3_dev, led->hw_num, 0);
-+	}
-+	else {
-+		asic3_set_gpio_out_c(asic3_dev, led->hw_num, led->hw_num);
-+		#ifdef CONFIG_LEDS_TRIGGER_HWTIMER
-+		if (led_cdev->trigger && led_cdev->trigger->is_led_supported &&
-+			       (led_cdev->trigger->is_led_supported(led_cdev) &
-+			        LED_SUPPORTS_HWTIMER)) {
-+			struct hwtimer_data *td = led_cdev->trigger_data;
-+			if (!td) return;
-+			asic3_set_led(asic3_dev, led->hw_num, td->delay_on/8,
-+					   (td->delay_on + td->delay_off)/8, 6);
-+		}
-+		else
-+		#endif
-+		asic3_set_led(asic3_dev, led->hw_num, 16, 16, 6);
-+	}
-+
-+	return;
-+}
-+
-+static
-+int asic3_leds_probe(struct platform_device *pdev)
-+{
-+	struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data;
-+	struct asic3_led *leds = machinfo->leds;
-+	int ret, i = 0;
-+
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+
-+	// Turn on clocks early, for the case if trigger would enable
-+	// led immediately after led_classdev_register().
-+	asic3_set_clock_cdex(&machinfo->asic3_pdev->dev,
-+		CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2,
-+		CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2);
-+
-+	for (i = 0; i < machinfo->num_leds; i++) {
-+		leds[i].machinfo = machinfo;
-+		leds[i].led_cdev.brightness_set = asic3_leds_set;
-+		ret = led_classdev_register(&pdev->dev, &leds[i].led_cdev);
-+		if (ret) {
-+			printk(KERN_ERR "Error: can't register %s led\n",
-+			       leds[i].led_cdev.name);
-+			goto out_err;
-+		}
-+	}
-+
-+	return 0;
-+
-+out_err:
-+	while (--i >= 0) led_classdev_unregister(&leds[i].led_cdev);
-+
-+	asic3_set_clock_cdex(&machinfo->asic3_pdev->dev,
-+		CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2,
-+		0               | 0               | 0);
-+
-+	return ret;
-+}
-+
-+static
-+int asic3_leds_remove(struct platform_device *pdev)
-+{
-+	struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data;
-+	struct asic3_led *leds = machinfo->leds;
-+	int i = 0;
-+
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+
-+	for (i = 0; i < machinfo->num_leds; i++)
-+		led_classdev_unregister(&leds[i].led_cdev);
-+
-+	asic3_set_clock_cdex(&machinfo->asic3_pdev->dev,
-+		CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2,
-+		0               | 0               | 0);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static
-+int asic3_leds_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data;
-+	struct asic3_led *leds = machinfo->leds;
-+	int i = 0;
-+
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+
-+	for (i = 0; i < machinfo->num_leds; i++)
-+		led_classdev_suspend(&leds[i].led_cdev);
-+
-+	return 0;
-+}
-+
-+static
-+int asic3_leds_resume(struct platform_device *pdev)
-+{
-+	struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data;
-+	struct asic3_led *leds = machinfo->leds;
-+	int i = 0;
-+
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+
-+	for (i = 0; i < machinfo->num_leds; i++)
-+		led_classdev_resume(&leds[i].led_cdev);
-+
-+	return 0;
-+}
-+
-+#endif
-+
-+static
-+struct platform_driver asic3_leds_driver = {
-+	.probe = asic3_leds_probe,
-+	.remove = asic3_leds_remove,
-+#ifdef CONFIG_PM
-+	.suspend = asic3_leds_suspend,
-+	.resume = asic3_leds_resume,
-+#endif
-+	.driver = {
-+		.name = "asic3-leds",
-+	},
-+};
-+
-+int asic3_leds_register(void)
-+{
-+	dbg("%s:%s\n", __FILE__, __FUNCTION__);
-+	return platform_driver_register(&asic3_leds_driver);
-+}
-+
-+void asic3_leds_unregister(void)
-+{
-+	platform_driver_unregister(&asic3_leds_driver);
-+	return;
-+}
-+
-+EXPORT_SYMBOL_GPL(asic3_leds_register);
-+EXPORT_SYMBOL_GPL(asic3_leds_unregister);
-+
-+MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
-+MODULE_DESCRIPTION("HTC ASIC3 LEDs driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26-rc4/drivers/mfd/Kconfig
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/mfd/Kconfig	2008-06-01 18:49:43.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/mfd/Kconfig	2008-06-01 18:49:45.000000000 +0100
-@@ -44,6 +44,16 @@
- 	help
- 	  Support for TI TSC2101 Touchscreen and Audio Codec
- 
-+config HTC_ASIC3
-+        tristate "HTC ASIC3 (iPAQ h1900/h3900/h4000/hx4700/rx3000) support"
-+
-+config HTC_ASIC3_DS1WM
-+       bool "Support HTC ASIC3 builtin DS1WM block"
-+       help
-+           Choose Y here if you want to include support for ASIC3's builtin
-+           W1 controller. Some devices do not use it, and yet other have
-+           separate DS1WM controller. For them, choose N.
-+
- endmenu
- 
- menu "Multimedia Capabilities Port drivers"
-Index: linux-2.6.26-rc4/drivers/mfd/Makefile
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/mfd/Makefile	2008-06-01 18:49:43.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/mfd/Makefile	2008-06-01 18:49:45.000000000 +0100
-@@ -2,6 +2,8 @@
- # Makefile for multifunction miscellaneous devices
- #
- 
-+obj-$(CONFIG_HTC_ASIC3)         += asic3_base.o soc-core.o
-+
- obj-$(CONFIG_MFD_SM501)		+= sm501.o
- obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
- 
-Index: linux-2.6.26-rc4/drivers/mfd/asic3_base.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/drivers/mfd/asic3_base.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,1208 @@
-+/*
-+ * Driver interface to HTC "ASIC3"
-+ *
-+ * Copyright 2001 Compaq Computer Corporation.
-+ * Copyright 2004-2005 Phil Blundell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-+ * FITNESS FOR ANY PARTICULAR PURPOSE.
-+ *
-+ * Author:  Andrew Christian
-+ *          <Andrew.Christian@compaq.com>
-+ *          October 2001
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/clk.h>
-+#include <linux/ds1wm.h>
-+#include <asm/arch/clock.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <linux/soc/asic3_base.h>
-+#include <linux/soc/tmio_mmc.h>
-+#include "soc-core.h"
-+
-+
-+struct asic3_data {
-+	void *mapping;
-+	unsigned int bus_shift;
-+	int irq_base;
-+	int irq_nr;
-+
-+	u16 irq_bothedge[4];
-+	struct device *dev;
-+
-+	struct platform_device *mmc_dev;
-+};
-+
-+static DEFINE_SPINLOCK(asic3_gpio_lock);
-+
-+static int asic3_remove(struct platform_device *dev);
-+
-+static inline unsigned long asic3_address(struct device *dev,
-+					  unsigned int reg)
-+{
-+	struct asic3_data *adata;
-+
-+	adata = (struct asic3_data *)dev->driver_data;
-+
-+	return (unsigned long)adata->mapping + (reg >> (2 - adata->bus_shift));
-+}
-+
-+void asic3_write_register(struct device *dev, unsigned int reg, u32 value)
-+{
-+	__raw_writew(value, asic3_address(dev, reg));
-+}
-+EXPORT_SYMBOL(asic3_write_register);
-+
-+u32 asic3_read_register(struct device *dev, unsigned int reg)
-+{
-+	return __raw_readw(asic3_address(dev, reg));
-+}
-+EXPORT_SYMBOL(asic3_read_register);
-+
-+static inline void __asic3_write_register(struct asic3_data *asic,
-+					  unsigned int reg, u32 value)
-+{
-+	__raw_writew(value, (unsigned long)asic->mapping
-+			    + (reg >> (2 - asic->bus_shift)));
-+}
-+
-+static inline u32 __asic3_read_register(struct asic3_data *asic,
-+					unsigned int reg)
-+{
-+	return __raw_readw((unsigned long)asic->mapping
-+			   + (reg >> (2 - asic->bus_shift)));
-+}
-+
-+#define ASIC3_GPIO_FN(get_fn_name, set_fn_name, REG)			\
-+u32 get_fn_name(struct device *dev)					\
-+{                                                                       \
-+	return asic3_read_register(dev, REG);				\
-+}                                                                       \
-+EXPORT_SYMBOL(get_fn_name);						\
-+									\
-+void set_fn_name(struct device *dev, u32 bits, u32 val)			\
-+{                                                                       \
-+	unsigned long flags;						\
-+									\
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);			\
-+	val |= (asic3_read_register(dev, REG) & ~bits);			\
-+	asic3_write_register(dev, REG, val);				\
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);		\
-+}                                                                       \
-+EXPORT_SYMBOL(set_fn_name);
-+
-+#define ASIC3_GPIO_REGISTER(ACTION, action, fn, FN)			\
-+	ASIC3_GPIO_FN(asic3_get_gpio_ ## action ## _ ## fn ,		\
-+		       asic3_set_gpio_ ## action ## _ ## fn ,		\
-+		       _IPAQ_ASIC3_GPIO_ ## FN ## _Base 		\
-+		       + _IPAQ_ASIC3_GPIO_ ## ACTION )
-+
-+#define ASIC3_GPIO_FUNCTIONS(fn, FN)					\
-+	ASIC3_GPIO_REGISTER(Direction, dir, fn, FN)			\
-+	ASIC3_GPIO_REGISTER(Out, out, fn, FN)				\
-+	ASIC3_GPIO_REGISTER(SleepMask, sleepmask, fn, FN)		\
-+	ASIC3_GPIO_REGISTER(SleepOut, sleepout, fn, FN)		\
-+	ASIC3_GPIO_REGISTER(BattFaultOut, battfaultout, fn, FN)	\
-+	ASIC3_GPIO_REGISTER(AltFunction, alt_fn, fn, FN)		\
-+	ASIC3_GPIO_REGISTER(SleepConf, sleepconf, fn, FN)		\
-+	ASIC3_GPIO_REGISTER(Status, status, fn, FN)
-+
-+#if 0
-+	ASIC3_GPIO_REGISTER(Mask, mask, fn, FN)
-+	ASIC3_GPIO_REGISTER(TriggerType, trigtype, fn, FN)
-+	ASIC3_GPIO_REGISTER(EdgeTrigger, rising, fn, FN)
-+	ASIC3_GPIO_REGISTER(LevelTrigger, triglevel, fn, FN)
-+	ASIC3_GPIO_REGISTER(IntStatus, intstatus, fn, FN)
-+#endif
-+
-+ASIC3_GPIO_FUNCTIONS(a, A)
-+ASIC3_GPIO_FUNCTIONS(b, B)
-+ASIC3_GPIO_FUNCTIONS(c, C)
-+ASIC3_GPIO_FUNCTIONS(d, D)
-+
-+int asic3_gpio_get_value(struct device *dev, unsigned gpio)
-+{
-+	u32 mask = ASIC3_GPIO_bit(gpio);
-+	printk("%s(%d)\n", __FUNCTION__, gpio);
-+	switch (gpio >> 4) {
-+	case _IPAQ_ASIC3_GPIO_BANK_A:
-+		return asic3_get_gpio_status_a(dev) & mask;
-+	case _IPAQ_ASIC3_GPIO_BANK_B:
-+		return asic3_get_gpio_status_b(dev) & mask;
-+	case _IPAQ_ASIC3_GPIO_BANK_C:
-+		return asic3_get_gpio_status_c(dev) & mask;
-+	case _IPAQ_ASIC3_GPIO_BANK_D:
-+		return asic3_get_gpio_status_d(dev) & mask;
-+	}
-+
-+	printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio);
-+	return 0;
-+}
-+EXPORT_SYMBOL(asic3_gpio_get_value);
-+
-+void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val)
-+{
-+	u32 mask = ASIC3_GPIO_bit(gpio);
-+	u32 bitval = 0;
-+	if (val)  bitval = mask;
-+	printk("%s(%d, %d)\n", __FUNCTION__, gpio, val);
-+
-+	switch (gpio >> 4) {
-+	case _IPAQ_ASIC3_GPIO_BANK_A:
-+		asic3_set_gpio_out_a(dev, mask, bitval);
-+		return;
-+	case _IPAQ_ASIC3_GPIO_BANK_B:
-+		asic3_set_gpio_out_b(dev, mask, bitval);
-+		return;
-+	case _IPAQ_ASIC3_GPIO_BANK_C:
-+		asic3_set_gpio_out_c(dev, mask, bitval);
-+		return;
-+	case _IPAQ_ASIC3_GPIO_BANK_D:
-+		asic3_set_gpio_out_d(dev, mask, bitval);
-+		return;
-+	}
-+
-+	printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio);
-+}
-+EXPORT_SYMBOL(asic3_gpio_set_value);
-+
-+int asic3_irq_base(struct device *dev)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+
-+	return asic->irq_base;
-+}
-+EXPORT_SYMBOL(asic3_irq_base);
-+
-+static int asic3_gpio_to_irq(struct device *dev, unsigned gpio)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	printk("%s(%d)\n", __FUNCTION__, gpio);
-+
-+	return asic->irq_base + gpio;
-+}
-+
-+void asic3_set_led(struct device *dev, int led_num, int duty_time,
-+		   int cycle_time, int timebase)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned int led_base;
-+
-+	/* it's a macro thing: see #define _IPAQ_ASIC_LED_0_Base for why you
-+	 * can't substitute led_num in the macros below...
-+	 */
-+
-+	switch (led_num) {
-+	case 0:
-+		led_base = _IPAQ_ASIC3_LED_0_Base;
-+		break;
-+	case 1:
-+		led_base = _IPAQ_ASIC3_LED_1_Base;
-+		break;
-+	case 2:
-+		led_base = _IPAQ_ASIC3_LED_2_Base;
-+		break;
-+	default:
-+		printk(KERN_ERR "%s: invalid led number %d", __FUNCTION__,
-+		       led_num);
-+		return;
-+	}
-+
-+	__asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_TimeBase,
-+			       timebase | LED_EN);
-+	__asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_PeriodTime,
-+			       cycle_time);
-+	__asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime,
-+			       0);
-+	udelay(20);     /* asic voodoo - possibly need a whole duty cycle? */
-+	__asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime,
-+			       duty_time);
-+}
-+EXPORT_SYMBOL(asic3_set_led);
-+
-+void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_clock_sel);
-+
-+void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_clock_cdex);
-+
-+static void asic3_clock_cdex_enable(struct clk *clk)
-+{
-+	struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit;
-+	unsigned long flags, val;
-+
-+	local_irq_save(flags);
-+
-+	val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX));
-+	val |= clk->ctrlbit;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val);
-+
-+	local_irq_restore(flags);
-+}
-+
-+static void asic3_clock_cdex_disable(struct clk *clk)
-+{
-+	struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit;
-+	unsigned long flags, val;
-+
-+	local_irq_save(flags);
-+
-+	val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX));
-+	val &= ~clk->ctrlbit;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val);
-+
-+	local_irq_restore(flags);
-+}
-+
-+/* base clocks */
-+
-+static struct clk clk_g = {
-+	.name		= "gclk",
-+	.rate		= 0,
-+	.parent		= NULL,
-+};
-+
-+/* clock definitions */
-+
-+static struct clk asic3_clocks[] = {
-+	{
-+		.name    = "spi",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_SPI,
-+	},
-+#ifdef CONFIG_HTC_ASIC3_DS1WM
-+	{
-+		.name    = "ds1wm",
-+		.id      = -1,
-+		.rate	 = 5000000,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_OWM,
-+	},
-+#endif
-+	{
-+		.name    = "pwm0",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_PWM0,
-+	},
-+	{
-+		.name    = "pwm1",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_PWM1,
-+	},
-+	{
-+		.name    = "led0",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_LED0,
-+	},
-+	{
-+		.name    = "led1",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_LED1,
-+	},
-+	{
-+		.name    = "led2",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_LED2,
-+	},
-+	{
-+		.name    = "smbus",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_SMBUS,
-+	},
-+	{
-+		.name    = "ex0",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_EX0,
-+	},
-+	{
-+		.name    = "ex1",
-+		.id      = -1,
-+		.parent  = &clk_g,
-+		.enable  = asic3_clock_cdex_enable,
-+		.disable = asic3_clock_cdex_disable,
-+		.ctrlbit = CLOCK_CDEX_EX1,
-+	},
-+};
-+
-+void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_extcf_select);
-+
-+void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_extcf_reset);
-+
-+void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	unsigned long flags;
-+	u32 v;
-+
-+	spin_lock_irqsave (&asic3_gpio_lock, flags);
-+	v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf));
-+	v = (v & ~bits) | val;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf), v);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+EXPORT_SYMBOL(asic3_set_sdhwctrl);
-+
-+
-+#define MAX_ASIC_ISR_LOOPS    20
-+#define _IPAQ_ASIC3_GPIO_Base_INCR \
-+	(_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base)
-+
-+static inline void asic3_irq_flip_edge(struct asic3_data *asic,
-+				       u32 base, int bit)
-+{
-+	u16 edge = __asic3_read_register(asic,
-+		base + _IPAQ_ASIC3_GPIO_EdgeTrigger);
-+	edge ^= bit;
-+	__asic3_write_register(asic,
-+		base + _IPAQ_ASIC3_GPIO_EdgeTrigger, edge);
-+}
-+
-+static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
-+{
-+	int iter;
-+	struct asic3_data *asic;
-+
-+	/* Acknowledge the parrent (i.e. CPU's) IRQ */
-+	desc->chip->ack(irq);
-+
-+	asic = desc->handler_data;
-+
-+	/* printk( KERN_NOTICE "asic3_irq_demux: irq=%d\n", irq ); */
-+	for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
-+		u32 status;
-+		int bank;
-+
-+		status = __asic3_read_register(asic,
-+			IPAQ_ASIC3_OFFSET(INTR, PIntStat));
-+		/* Check all ten register bits */
-+		if ((status & 0x3ff) == 0)
-+			break;
-+
-+		/* Handle GPIO IRQs */
-+		for (bank = 0; bank < 4; bank++) {
-+			if (status & (1 << bank)) {
-+				unsigned long base, i, istat;
-+
-+				base = _IPAQ_ASIC3_GPIO_A_Base
-+				       + bank * _IPAQ_ASIC3_GPIO_Base_INCR;
-+				istat = __asic3_read_register(asic,
-+					base + _IPAQ_ASIC3_GPIO_IntStatus);
-+				/* IntStatus is write 0 to clear */
-+				/* XXX could miss interrupts! */
-+				__asic3_write_register(asic,
-+					base + _IPAQ_ASIC3_GPIO_IntStatus, 0);
-+
-+				for (i = 0; i < 16; i++) {
-+					int bit = (1 << i);
-+					unsigned int irqnr;
-+					if (!(istat & bit))
-+						continue;
-+
-+					irqnr = asic->irq_base
-+						+ (16 * bank) + i;
-+					desc = irq_desc + irqnr;
-+					desc->handle_irq(irqnr, desc);
-+					if (asic->irq_bothedge[bank] & bit) {
-+						asic3_irq_flip_edge(asic, base,
-+								    bit);
-+					}
-+				}
-+			}
-+		}
-+
-+		/* Handle remaining IRQs in the status register */
-+		{
-+			int i;
-+
-+			for (i = ASIC3_LED0_IRQ; i <= ASIC3_OWM_IRQ; i++) {
-+				/* They start at bit 4 and go up */
-+				if (status & (1 << (i - ASIC3_LED0_IRQ + 4))) {
-+					desc = irq_desc + asic->irq_base + i;
-+					desc->handle_irq(asic->irq_base + i,
-+							 desc);
-+				}
-+			}
-+		}
-+
-+	}
-+
-+	if (iter >= MAX_ASIC_ISR_LOOPS)
-+		printk(KERN_ERR "%s: interrupt processing overrun\n",
-+		       __FUNCTION__);
-+}
-+
-+static inline int asic3_irq_to_bank(struct asic3_data *asic, int irq)
-+{
-+	int n;
-+
-+	n = (irq - asic->irq_base) >> 4;
-+
-+	return (n * (_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base));
-+}
-+
-+static inline int asic3_irq_to_index(struct asic3_data *asic, int irq)
-+{
-+	return (irq - asic->irq_base) & 15;
-+}
-+
-+static void asic3_mask_gpio_irq(unsigned int irq)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	u32 val, bank, index;
-+	unsigned long flags;
-+
-+	bank = asic3_irq_to_bank(asic, irq);
-+	index = asic3_irq_to_index(asic, irq);
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask);
-+	val |= 1 << index;
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+
-+static void asic3_mask_irq(unsigned int irq)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	int regval;
-+
-+	if (irq < ASIC3_NR_GPIO_IRQS) {
-+		printk(KERN_ERR "asic3_base: gpio mask attempt, irq %d\n",
-+		       irq);
-+		return;
-+	}
-+
-+	regval = __asic3_read_register(asic,
-+		_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask);
-+
-+	switch (irq - asic->irq_base) {
-+	case ASIC3_LED0_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK0);
-+		break;
-+	case ASIC3_LED1_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK1);
-+		break;
-+	case ASIC3_LED2_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK2);
-+		break;
-+	case ASIC3_SPI_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK3);
-+		break;
-+	case ASIC3_SMBUS_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK4);
-+		break;
-+	case ASIC3_OWM_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval & ~ASIC3_INTMASK_MASK5);
-+		break;
-+	default:
-+		printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq);
-+		break;
-+	}
-+}
-+
-+static void asic3_unmask_gpio_irq(unsigned int irq)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	u32 val, bank, index;
-+	unsigned long flags;
-+
-+	bank = asic3_irq_to_bank(asic, irq);
-+	index = asic3_irq_to_index(asic, irq);
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask);
-+	val &= ~(1 << index);
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+}
-+
-+static void asic3_unmask_irq(unsigned int irq)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	int regval;
-+
-+	if (irq < ASIC3_NR_GPIO_IRQS) {
-+		printk(KERN_ERR "asic3_base: gpio unmask attempt, irq %d\n",
-+		       irq);
-+		return;
-+	}
-+
-+	regval = __asic3_read_register(asic,
-+		_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask);
-+
-+	switch (irq - asic->irq_base) {
-+	case ASIC3_LED0_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK0);
-+		break;
-+	case ASIC3_LED1_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK1);
-+		break;
-+	case ASIC3_LED2_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK2);
-+		break;
-+	case ASIC3_SPI_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK3);
-+		break;
-+	case ASIC3_SMBUS_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK4);
-+		break;
-+	case ASIC3_OWM_IRQ:
-+		__asic3_write_register(asic,
-+			_IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask,
-+			regval | ASIC3_INTMASK_MASK5);
-+		break;
-+	default:
-+		printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq);
-+		break;
-+	}
-+}
-+
-+static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
-+{
-+	struct asic3_data *asic = get_irq_chip_data(irq);
-+	u32 bank, index;
-+	unsigned long flags;
-+	u16 trigger, level, edge, bit;
-+
-+	bank = asic3_irq_to_bank(asic, irq);
-+	index = asic3_irq_to_index(asic, irq);
-+	bit = 1<<index;
-+
-+	spin_lock_irqsave(&asic3_gpio_lock, flags);
-+	level = __asic3_read_register(asic,
-+		bank + _IPAQ_ASIC3_GPIO_LevelTrigger);
-+	edge = __asic3_read_register(asic,
-+		bank + _IPAQ_ASIC3_GPIO_EdgeTrigger);
-+	trigger = __asic3_read_register(asic,
-+		bank + _IPAQ_ASIC3_GPIO_TriggerType);
-+	asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
-+
-+	if (type == IRQT_RISING) {
-+		trigger |= bit;
-+		edge |= bit;
-+	} else if (type == IRQT_FALLING) {
-+		trigger |= bit;
-+		edge &= ~bit;
-+	} else if (type == IRQT_BOTHEDGE) {
-+		trigger |= bit;
-+		if (asic3_gpio_get_value(asic->dev, irq - asic->irq_base))
-+			edge &= ~bit;
-+		else
-+			edge |= bit;
-+		asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
-+	} else if (type == IRQT_LOW) {
-+		trigger &= ~bit;
-+		level &= ~bit;
-+	} else if (type == IRQT_HIGH) {
-+		trigger &= ~bit;
-+		level |= bit;
-+	} else {
-+		/*
-+		 * if type == IRQT_NOEDGE, we should mask interrupts, but
-+		 * be careful to not unmask them if mask was also called.
-+		 * Probably need internal state for mask.
-+		 */
-+		printk(KERN_NOTICE "asic3: irq type not changed.\n");
-+	}
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_LevelTrigger,
-+			       level);
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_EdgeTrigger,
-+			       edge);
-+	__asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_TriggerType,
-+			       trigger);
-+	spin_unlock_irqrestore(&asic3_gpio_lock, flags);
-+	return 0;
-+}
-+
-+static struct irq_chip asic3_gpio_irq_chip = {
-+	.name		= "ASIC3-GPIO",
-+	.ack		= asic3_mask_gpio_irq,
-+	.mask		= asic3_mask_gpio_irq,
-+	.unmask		= asic3_unmask_gpio_irq,
-+	.set_type	= asic3_gpio_irq_type,
-+};
-+
-+static struct irq_chip asic3_irq_chip = {
-+	.name		= "ASIC3",
-+	.ack		= asic3_mask_irq,
-+	.mask		= asic3_mask_irq,
-+	.unmask		= asic3_unmask_irq,
-+};
-+
-+static void asic3_release(struct device *dev)
-+{
-+	struct platform_device *sdev = to_platform_device(dev);
-+
-+	kfree(sdev->resource);
-+	kfree(sdev);
-+}
-+
-+int asic3_register_mmc(struct device *dev)
-+{
-+	struct platform_device *sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
-+	struct tmio_mmc_hwconfig *mmc_config = kmalloc(sizeof(*mmc_config),
-+						       GFP_KERNEL);
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct asic3_data *asic = dev->driver_data;
-+	struct asic3_platform_data *asic3_pdata = dev->platform_data;
-+	struct resource *res;
-+	int rc;
-+
-+	if (sdev == NULL || mmc_config == NULL)
-+		return -ENOMEM;
-+
-+	if (asic3_pdata->tmio_mmc_hwconfig) {
-+		memcpy(mmc_config, asic3_pdata->tmio_mmc_hwconfig,
-+		       sizeof(*mmc_config));
-+	} else {
-+		memset(mmc_config, 0, sizeof(*mmc_config));
-+	}
-+	mmc_config->address_shift = asic->bus_shift;
-+
-+	sdev->id = -1;
-+	sdev->name = "asic3_mmc";
-+	sdev->dev.parent = dev;
-+	sdev->num_resources = 2;
-+	sdev->dev.platform_data = mmc_config;
-+	sdev->dev.release = asic3_release;
-+
-+	res = kzalloc(sdev->num_resources * sizeof(struct resource),
-+		      GFP_KERNEL);
-+	if (res == NULL) {
-+		kfree(sdev);
-+		kfree(mmc_config);
-+		return -ENOMEM;
-+	}
-+	sdev->resource = res;
-+
-+	res[0].start = pdev->resource[2].start;
-+	res[0].end   = pdev->resource[2].end;
-+	res[0].flags = IORESOURCE_MEM;
-+	res[1].start = res[1].end = pdev->resource[3].start;
-+	res[1].flags = IORESOURCE_IRQ;
-+
-+	rc = platform_device_register(sdev);
-+	if (rc) {
-+		printk(KERN_ERR "asic3_base: "
-+		       "Could not register asic3_mmc device\n");
-+		kfree(res);
-+		kfree(sdev);
-+		return rc;
-+	}
-+
-+	asic->mmc_dev = sdev;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(asic3_register_mmc);
-+
-+int asic3_unregister_mmc(struct device *dev)
-+{
-+	struct asic3_data *asic = dev->driver_data;
-+	platform_device_unregister(asic->mmc_dev);
-+	asic->mmc_dev = 0;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(asic3_unregister_mmc);
-+
-+#ifdef CONFIG_HTC_ASIC3_DS1WM
-+/*
-+ * 	DS1WM subdevice
-+ */
-+
-+static void asic3_ds1wm_enable(struct platform_device *ds1wm_dev)
-+{
-+	struct device *dev = ds1wm_dev->dev.parent;
-+
-+	/* Turn on external clocks and the OWM clock */
-+	asic3_set_clock_cdex(dev,
-+		CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM,
-+		CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM);
-+
-+	mdelay(1);
-+
-+	asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET,
-+			      ASIC3_EXTCF_OWM_RESET);
-+	mdelay(1);
-+	asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET, 0);
-+	mdelay(1);
-+
-+	/* Clear OWM_SMB, set OWM_EN */
-+	asic3_set_extcf_select(dev,
-+		ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN,
-+		0                   | ASIC3_EXTCF_OWM_EN);
-+
-+	mdelay(1);
-+}
-+
-+static void asic3_ds1wm_disable(struct platform_device *ds1wm_dev)
-+{
-+	struct device *dev = ds1wm_dev->dev.parent;
-+
-+	asic3_set_extcf_select(dev,
-+		ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN,
-+		0                   | 0);
-+
-+	asic3_set_clock_cdex(dev,
-+		CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM,
-+		CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | 0);
-+}
-+
-+
-+static struct resource asic3_ds1wm_resources[] = {
-+	{
-+		.start = _IPAQ_ASIC3_OWM_Base,
-+		.end   = _IPAQ_ASIC3_OWM_Base + 0x14 - 1,
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.start = ASIC3_OWM_IRQ,
-+		.end   = ASIC3_OWM_IRQ,
-+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-+			 IORESOURCE_IRQ_SOC_SUBDEVICE,
-+	},
-+};
-+
-+static struct ds1wm_platform_data ds1wm_pd = {
-+	.enable = asic3_ds1wm_enable,
-+	.disable = asic3_ds1wm_disable,
-+};
-+#endif
-+
-+static struct soc_device_data asic3_blocks[] = {
-+#ifdef CONFIG_HTC_ASIC3_DS1WM
-+	{
-+		.name = "ds1wm",
-+		.res = asic3_ds1wm_resources,
-+		.num_resources = ARRAY_SIZE(asic3_ds1wm_resources),
-+		.hwconfig = &ds1wm_pd,
-+	},
-+#endif
-+};
-+
-+static int asic3_probe(struct platform_device *pdev)
-+{
-+	struct asic3_platform_data *pdata = pdev->dev.platform_data;
-+	struct asic3_data *asic;
-+	struct device *dev = &pdev->dev;
-+	unsigned long clksel;
-+	int i, rc;
-+
-+	asic = kzalloc(sizeof(struct asic3_data), GFP_KERNEL);
-+	if (!asic)
-+		return -ENOMEM;
-+
-+	platform_set_drvdata(pdev, asic);
-+	asic->dev = &pdev->dev;
-+
-+	asic->mapping = ioremap(pdev->resource[0].start, IPAQ_ASIC3_MAP_SIZE);
-+	if (!asic->mapping) {
-+		printk(KERN_ERR "asic3: couldn't ioremap ASIC3\n");
-+		kfree (asic);
-+		return -ENOMEM;
-+	}
-+
-+	if (pdata && pdata->bus_shift)
-+		asic->bus_shift = pdata->bus_shift;
-+	else
-+		asic->bus_shift = 2;
-+
-+	/* XXX: should get correct SD clock values from pdata struct  */
-+	clksel = 0;
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), clksel);
-+
-+	/* Register ASIC3's clocks. */
-+	clk_g.ctrlbit = (int)asic;
-+
-+	if (clk_register(&clk_g) < 0)
-+		printk(KERN_ERR "asic3: failed to register ASIC3 gclk\n");
-+
-+	for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++) {
-+		rc = clk_register(&asic3_clocks[i]);
-+		if (rc < 0)
-+			printk(KERN_ERR "asic3: "
-+			       "failed to register clock %s (%d)\n",
-+			       asic3_clocks[i].name, rc);
-+	}
-+
-+	__asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
-+	__asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
-+	__asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
-+	__asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
-+
-+	asic3_set_gpio_sleepmask_a(dev, 0xffff, 0xffff);
-+	asic3_set_gpio_sleepmask_b(dev, 0xffff, 0xffff);
-+	asic3_set_gpio_sleepmask_c(dev, 0xffff, 0xffff);
-+	asic3_set_gpio_sleepmask_d(dev, 0xffff, 0xffff);
-+
-+	if (pdata) {
-+		asic3_set_gpio_out_a(dev, 0xffff, pdata->gpio_a.init);
-+		asic3_set_gpio_out_b(dev, 0xffff, pdata->gpio_b.init);
-+		asic3_set_gpio_out_c(dev, 0xffff, pdata->gpio_c.init);
-+		asic3_set_gpio_out_d(dev, 0xffff, pdata->gpio_d.init);
-+
-+		asic3_set_gpio_dir_a(dev, 0xffff, pdata->gpio_a.dir);
-+		asic3_set_gpio_dir_b(dev, 0xffff, pdata->gpio_b.dir);
-+		asic3_set_gpio_dir_c(dev, 0xffff, pdata->gpio_c.dir);
-+		asic3_set_gpio_dir_d(dev, 0xffff, pdata->gpio_d.dir);
-+
-+		asic3_set_gpio_sleepmask_a(dev, 0xffff,
-+					   pdata->gpio_a.sleep_mask);
-+		asic3_set_gpio_sleepmask_b(dev, 0xffff,
-+					   pdata->gpio_b.sleep_mask);
-+		asic3_set_gpio_sleepmask_c(dev, 0xffff,
-+					   pdata->gpio_c.sleep_mask);
-+		asic3_set_gpio_sleepmask_d(dev, 0xffff,
-+					   pdata->gpio_d.sleep_mask);
-+
-+		asic3_set_gpio_sleepout_a(dev, 0xffff,
-+					  pdata->gpio_a.sleep_out);
-+		asic3_set_gpio_sleepout_b(dev, 0xffff,
-+					  pdata->gpio_b.sleep_out);
-+		asic3_set_gpio_sleepout_c(dev, 0xffff,
-+					  pdata->gpio_c.sleep_out);
-+		asic3_set_gpio_sleepout_d(dev, 0xffff,
-+					  pdata->gpio_d.sleep_out);
-+
-+		asic3_set_gpio_battfaultout_a(dev, 0xffff,
-+					      pdata->gpio_a.batt_fault_out);
-+		asic3_set_gpio_battfaultout_b(dev, 0xffff,
-+					      pdata->gpio_b.batt_fault_out);
-+		asic3_set_gpio_battfaultout_c(dev, 0xffff,
-+					      pdata->gpio_c.batt_fault_out);
-+		asic3_set_gpio_battfaultout_d(dev, 0xffff,
-+					      pdata->gpio_d.batt_fault_out);
-+
-+		asic3_set_gpio_sleepconf_a(dev, 0xffff,
-+					   pdata->gpio_a.sleep_conf);
-+		asic3_set_gpio_sleepconf_b(dev, 0xffff,
-+					   pdata->gpio_b.sleep_conf);
-+		asic3_set_gpio_sleepconf_c(dev, 0xffff,
-+					   pdata->gpio_c.sleep_conf);
-+		asic3_set_gpio_sleepconf_d(dev, 0xffff,
-+					   pdata->gpio_d.sleep_conf);
-+
-+		asic3_set_gpio_alt_fn_a(dev, 0xffff,
-+					pdata->gpio_a.alt_function);
-+		asic3_set_gpio_alt_fn_b(dev, 0xffff,
-+					pdata->gpio_b.alt_function);
-+		asic3_set_gpio_alt_fn_c(dev, 0xffff,
-+					pdata->gpio_c.alt_function);
-+		asic3_set_gpio_alt_fn_d(dev, 0xffff,
-+					pdata->gpio_d.alt_function);
-+	}
-+
-+	asic->irq_nr = -1;
-+	asic->irq_base = -1;
-+
-+	if (pdev->num_resources > 1)
-+		asic->irq_nr = pdev->resource[1].start;
-+
-+	if (asic->irq_nr != -1) {
-+		unsigned int i;
-+
-+		if (!pdata->irq_base) {
-+			printk(KERN_ERR "asic3: IRQ base not specified\n");
-+			asic3_remove(pdev);
-+			return -EINVAL;
-+		}
-+
-+		asic->irq_base = pdata->irq_base;
-+
-+		/* turn on clock to IRQ controller */
-+		clksel |= CLOCK_SEL_CX;
-+		__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL),
-+				       clksel);
-+
-+		printk(KERN_INFO "asic3: using irq %d-%d on irq %d\n",
-+		       asic->irq_base, asic->irq_base + ASIC3_NR_IRQS - 1,
-+		       asic->irq_nr);
-+
-+		for (i = 0 ; i < ASIC3_NR_IRQS ; i++) {
-+			int irq = i + asic->irq_base;
-+			if (i < ASIC3_NR_GPIO_IRQS) {
-+				set_irq_chip(irq, &asic3_gpio_irq_chip);
-+				set_irq_chip_data(irq, asic);
-+				set_irq_handler(irq, handle_level_irq);
-+				set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+			} else {
-+				/* The remaining IRQs are not GPIO */
-+				set_irq_chip(irq, &asic3_irq_chip);
-+				set_irq_chip_data(irq, asic);
-+				set_irq_handler(irq, handle_level_irq);
-+				set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+			}
-+		}
-+
-+		__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask),
-+					ASIC3_INTMASK_GINTMASK);
-+
-+		set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
-+		set_irq_type(asic->irq_nr, IRQT_RISING);
-+		set_irq_data(asic->irq_nr, asic);
-+	}
-+
-+#ifdef CONFIG_HTC_ASIC3_DS1WM
-+	ds1wm_pd.bus_shift = asic->bus_shift;
-+#endif
-+
-+	pdata->gpiodev_ops.get = asic3_gpio_get_value;
-+	pdata->gpiodev_ops.set = asic3_gpio_set_value;
-+	pdata->gpiodev_ops.to_irq = asic3_gpio_to_irq;
-+
-+	soc_add_devices(pdev, asic3_blocks, ARRAY_SIZE(asic3_blocks),
-+			&pdev->resource[0],
-+			asic->bus_shift - ASIC3_DEFAULT_ADDR_SHIFT,
-+			asic->irq_base);
-+
-+	if (pdev->num_resources > 2) {
-+		int rc;
-+		rc = asic3_register_mmc(dev);
-+		if (rc) {
-+			asic3_remove(pdev);
-+			return rc;
-+		}
-+	}
-+
-+	if (pdata && pdata->num_child_platform_devs != 0)
-+		platform_add_devices(pdata->child_platform_devs,
-+				     pdata->num_child_platform_devs);
-+
-+	return 0;
-+}
-+
-+static int asic3_remove(struct platform_device *pdev)
-+{
-+	struct asic3_platform_data *pdata = pdev->dev.platform_data;
-+	struct asic3_data *asic = platform_get_drvdata(pdev);
-+	int i;
-+
-+	if (pdata && pdata->num_child_platform_devs != 0) {
-+		for (i = 0; i < pdata->num_child_platform_devs; i++) {
-+			platform_device_unregister(
-+				pdata->child_platform_devs[i]);
-+		}
-+	}
-+
-+	if (asic->irq_nr != -1) {
-+		unsigned int i;
-+
-+		for (i = 0 ; i < ASIC3_NR_IRQS ; i++) {
-+			int irq = i + asic->irq_base;
-+			set_irq_flags(irq, 0);
-+			set_irq_handler (irq, NULL);
-+			set_irq_chip (irq, NULL);
-+			set_irq_chip_data(irq, NULL);
-+		}
-+
-+		set_irq_chained_handler(asic->irq_nr, NULL);
-+	}
-+
-+	if (asic->mmc_dev)
-+		asic3_unregister_mmc(&pdev->dev);
-+
-+	for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++)
-+		clk_unregister(&asic3_clocks[i]);
-+	clk_unregister(&clk_g);
-+
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), 0);
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), 0);
-+
-+	iounmap(asic->mapping);
-+
-+	kfree(asic);
-+
-+	return 0;
-+}
-+
-+static void asic3_shutdown(struct platform_device *pdev)
-+{
-+}
-+
-+#define ASIC3_SUSPEND_CDEX_MASK \
-+	(CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2)
-+static unsigned short suspend_cdex;
-+
-+static int asic3_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct asic3_data *asic = platform_get_drvdata(pdev);
-+	suspend_cdex = __asic3_read_register(asic,
-+		_IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX);
-+	/* The LEDs are still active during suspend */
-+	__asic3_write_register(asic,
-+		_IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX,
-+		suspend_cdex & ASIC3_SUSPEND_CDEX_MASK);
-+	return 0;
-+}
-+
-+static int asic3_resume(struct platform_device *pdev)
-+{
-+	struct asic3_data *asic = platform_get_drvdata(pdev);
-+	unsigned short intmask;
-+
-+	__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX),
-+			       suspend_cdex);
-+
-+	if (asic->irq_nr != -1) {
-+		/* Toggle the interrupt mask to try to get ASIC3 to show
-+		 * the CPU an interrupt edge. For more details see the
-+		 * kernel-discuss thread around 13 June 2005 with the
-+		 * subject "asic3 suspend / resume". */
-+		intmask = __asic3_read_register(asic,
-+				IPAQ_ASIC3_OFFSET(INTR, IntMask));
-+		__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask),
-+				       intmask & ~ASIC3_INTMASK_GINTMASK);
-+		mdelay(1);
-+		__asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask),
-+				       intmask | ASIC3_INTMASK_GINTMASK);
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver asic3_device_driver = {
-+	.driver		= {
-+		.name	= "asic3",
-+	},
-+	.probe		= asic3_probe,
-+	.remove		= asic3_remove,
-+	.suspend	= asic3_suspend,
-+	.resume		= asic3_resume,
-+	.shutdown	= asic3_shutdown,
-+};
-+
-+static int __init asic3_base_init(void)
-+{
-+	int retval = 0;
-+	retval = platform_driver_register(&asic3_device_driver);
-+	return retval;
-+}
-+
-+static void __exit asic3_base_exit(void)
-+{
-+	platform_driver_unregister(&asic3_device_driver);
-+}
-+
-+#ifdef MODULE
-+module_init(asic3_base_init);
-+#else	/* start early for dependencies */
-+subsys_initcall(asic3_base_init);
-+#endif
-+module_exit(asic3_base_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>");
-+MODULE_DESCRIPTION("Core driver for HTC ASIC3");
-+MODULE_SUPPORTED_DEVICE("asic3");
-Index: linux-2.6.26-rc4/drivers/mfd/soc-core.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/drivers/mfd/soc-core.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,106 @@
-+/*
-+ * drivers/soc/soc-core.c
-+ *
-+ * core SoC support
-+ * Copyright (c) 2006 Ian Molton
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file contains functionality used by many SoC type devices.
-+ *
-+ * Created: 2006-11-28
-+ *
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include "soc-core.h"
-+
-+void soc_free_devices(struct platform_device *devices, int nr_devs)
-+{
-+	struct platform_device *dev = devices;
-+	int i;
-+
-+	for (i = 0; i < nr_devs; i++) {
-+		struct resource *res = dev->resource;
-+		platform_device_unregister(dev++);
-+		kfree(res);
-+	}
-+	kfree(devices);
-+}
-+EXPORT_SYMBOL_GPL(soc_free_devices);
-+
-+#define SIGNED_SHIFT(val, shift) ((shift) >= 0 ? ((val) << (shift)) : ((val) >> -(shift)))
-+
-+struct platform_device *soc_add_devices(struct platform_device *dev,
-+					struct soc_device_data *soc, int nr_devs,
-+					struct resource *mem,
-+					int relative_addr_shift, int irq_base)
-+{
-+	struct platform_device *devices;
-+	int i, r, base;
-+
-+	devices = kzalloc(nr_devs * sizeof(struct platform_device), GFP_KERNEL);
-+	if (!devices)
-+		return NULL;
-+
-+	for (i = 0; i < nr_devs; i++) {
-+		struct platform_device *sdev = &devices[i];
-+		struct soc_device_data *blk = &soc[i];
-+		struct resource *res;
-+
-+		sdev->id = -1;
-+		sdev->name = blk->name;
-+
-+		sdev->dev.parent = &dev->dev;
-+		sdev->dev.platform_data = (void *)blk->hwconfig;
-+		sdev->num_resources = blk->num_resources;
-+
-+		/* Allocate space for the subdevice resources */
-+		res = kzalloc (blk->num_resources * sizeof (struct resource), GFP_KERNEL);
-+		if (!res)
-+			goto fail;
-+
-+		for (r = 0 ; r < blk->num_resources ; r++) {
-+			res[r].name = blk->res[r].name; // Fixme - should copy
-+
-+			/* Find out base to use */
-+			base = 0;
-+			if (blk->res[r].flags & IORESOURCE_MEM) {
-+				base = mem->start;
-+			} else if ((blk->res[r].flags & IORESOURCE_IRQ) &&
-+				(blk->res[r].flags & IORESOURCE_IRQ_SOC_SUBDEVICE)) {
-+				base = irq_base;
-+			}
-+
-+			/* Adjust resource */
-+			if (blk->res[r].flags & IORESOURCE_MEM) {
-+				res[r].parent = mem;
-+				res[r].start = base + SIGNED_SHIFT(blk->res[r].start, relative_addr_shift);
-+				res[r].end   = base + SIGNED_SHIFT(blk->res[r].end,   relative_addr_shift);
-+			} else {
-+				res[r].start = base + blk->res[r].start;
-+				res[r].end   = base + blk->res[r].end;
-+			}
-+			res[r].flags = blk->res[r].flags;
-+		}
-+
-+		sdev->resource = res;
-+		if (platform_device_register(sdev)) {
-+			kfree(res);
-+			goto fail;
-+		}
-+
-+		printk(KERN_INFO "SoC: registering %s\n", blk->name);
-+	}
-+	return devices;
-+
-+fail:
-+	soc_free_devices(devices, i + 1);
-+	return NULL;
-+}
-+EXPORT_SYMBOL_GPL(soc_add_devices);
-Index: linux-2.6.26-rc4/drivers/mfd/soc-core.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/drivers/mfd/soc-core.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,30 @@
-+/*
-+ * drivers/soc/soc-core.h
-+ *
-+ * core SoC support
-+ * Copyright (c) 2006 Ian Molton
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file contains prototypes for the functions in soc-core.c
-+ *
-+ * Created: 2006-11-28
-+ *
-+ */
-+
-+struct soc_device_data {
-+	char *name;
-+	struct resource *res;
-+	int num_resources;
-+	void *hwconfig; /* platform_data to pass to the subdevice */
-+};
-+
-+struct platform_device *soc_add_devices(struct platform_device *dev,
-+					struct soc_device_data *soc, int n_devs,
-+					struct resource *mem,
-+					int relative_addr_shift, int irq_base);
-+
-+void soc_free_devices(struct platform_device *devices, int nr_devs);
-+
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/clock.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/clock.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,27 @@
-+/*
-+ *  linux/include/asm-arm/arch-pxa/clock.h
-+ *
-+ *  Copyright (C) 2006 Erik Hovland
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+struct clk {
-+	struct list_head	node;
-+	struct module		*owner;
-+	struct clk		*parent;
-+	const char		*name;
-+	int			id;
-+	unsigned int		enabled;
-+	unsigned long		rate;
-+	unsigned long		ctrlbit;
-+
-+	void			(*enable)(struct clk *);
-+	void			(*disable)(struct clk *);
-+};
-+
-+
-+extern int clk_register(struct clk *clk);
-+extern void clk_unregister(struct clk *clk);
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/htcuniversal-asic.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/htcuniversal-asic.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,213 @@
-+/*
-+ * include/asm/arm/arch-pxa/htcuniversal-asic.h
-+ *
-+ * Authors: Giuseppe Zompatori <giuseppe_zompatori@yahoo.it>
-+ *
-+ * based on previews work, see below:
-+ *
-+ * include/asm/arm/arch-pxa/hx4700-asic.h
-+ *      Copyright (c) 2004 SDG Systems, LLC
-+ *
-+ */
-+
-+#ifndef _HTCUNIVERSAL_ASIC_H_
-+#define _HTCUNIVERSAL_ASIC_H_
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+
-+/* ASIC3 */
-+
-+#define HTCUNIVERSAL_ASIC3_GPIO_PHYS	PXA_CS4_PHYS
-+#define HTCUNIVERSAL_ASIC3_MMC_PHYS	PXA_CS3_PHYS
-+
-+/* TODO: some information is missing here */
-+
-+/* ASIC3 GPIO A bank */
-+
-+#define GPIOA_I2C_EN	 	 	 0	/* Output */
-+#define GPIOA_SPK_PWR1_ON	 	 1	/* Output */
-+#define GPIOA_AUDIO_PWR_ON	 	 2	/* Output */
-+#define GPIOA_EARPHONE_PWR_ON	 	 3	/* Output */
-+
-+#define GPIOA_UNKNOWN4			 4	/* Output */
-+#define GPIOA_BUTTON_BACKLIGHT_N	 5	/* Input  */
-+#define GPIOA_SPK_PWR2_ON	 	 6	/* Output */
-+#define GPIOA_BUTTON_RECORD_N		 7	/* Input  */
-+
-+#define GPIOA_BUTTON_CAMERA_N		 8	/* Input  */
-+#define GPIOA_UNKNOWN9			 9	/* Output */
-+#define GPIOA_FLASHLIGHT 		10	/* Output */
-+#define GPIOA_COVER_ROTATE_N 		11	/* Input  */
-+
-+#define GPIOA_TOUCHSCREEN_N		12	/* Input  */
-+#define GPIOA_VOL_UP_N  		13	/* Input  */
-+#define GPIOA_VOL_DOWN_N 		14	/* Input  */
-+#define GPIOA_LCD_PWR5_ON 		15	/* Output */
-+
-+/* ASIC3 GPIO B bank */
-+
-+#define GPIOB_BB_READY			 0	/* Input */
-+#define GPIOB_CODEC_PDN			 1	/* Output */
-+#define GPIOB_UNKNOWN2			 2	/* Input  */
-+#define GPIOB_BB_UNKNOWN3		 3	/* Input  */
-+
-+#define GPIOB_BT_IRQ			 4	/* Input  */
-+#define GPIOB_CLAMSHELL_N		 5	/* Input  */
-+#define GPIOB_LCD_PWR3_ON		 6	/* Output */
-+#define GPIOB_BB_ALERT			 7	/* Input  */
-+
-+#define GPIOB_BB_RESET2			 8	/* Output */
-+#define GPIOB_EARPHONE_N		 9	/* Input  */
-+#define GPIOB_MICRECORD_N		10	/* Input  */
-+#define GPIOB_NIGHT_SENSOR		11	/* Input  */
-+
-+#define GPIOB_UMTS_DCD			12	/* Input  */
-+#define GPIOB_UNKNOWN13			13	/* Input  */
-+#define GPIOB_CHARGE_EN 		14	/* Output */
-+#define GPIOB_USB_PUEN 			15	/* Output */
-+
-+/* ASIC3 GPIO C bank */
-+
-+#define GPIOC_LED_BTWIFI  	   	 0	/* Output */
-+#define GPIOC_LED_RED		   	 1	/* Output */
-+#define GPIOC_LED_GREEN			 2	/* Output */
-+#define GPIOC_BOARDID3  		 3	/* Input  */
-+
-+#define GPIOC_WIFI_IRQ_N  		 4	/* Input  */
-+#define GPIOC_WIFI_RESET  		 5	/* Output */
-+#define GPIOC_WIFI_PWR1_ON  		 6	/* Output */
-+#define GPIOC_BT_RESET  		 7	/* Output */
-+
-+#define GPIOC_UNKNOWN8  		 8	/* Output */
-+#define GPIOC_LCD_PWR1_ON		 9	/* Output */
-+#define GPIOC_LCD_PWR2_ON 		10	/* Output */
-+#define GPIOC_BOARDID2  		11	/* Input  */
-+
-+#define GPIOC_BOARDID1			12	/* Input  */
-+#define GPIOC_BOARDID0  		13	/* Input  */
-+#define GPIOC_BT_PWR_ON			14	/* Output */
-+#define GPIOC_CHARGE_ON			15	/* Output */
-+
-+/* ASIC3 GPIO D bank */
-+
-+#define GPIOD_KEY_OK_N			 0	/* Input  */
-+#define GPIOD_KEY_RIGHT_N		 1	/* Input  */
-+#define GPIOD_KEY_LEFT_N		 2	/* Input  */
-+#define GPIOD_KEY_DOWN_N		 3	/* Input  */
-+
-+#define GPIOD_KEY_UP_N  		 4	/* Input  */
-+#define GPIOD_SDIO_DET			 5	/* Input  */
-+#define GPIOD_WIFI_PWR2_ON		 6	/* Output */
-+#define GPIOD_HW_REBOOT			 7	/* Output */
-+
-+#define GPIOD_BB_RESET1			 8	/* Output */
-+#define GPIOD_UNKNOWN9			 9	/* Output */
-+#define GPIOD_VIBRA_PWR_ON		10	/* Output */
-+#define GPIOD_WIFI_PWR3_ON		11	/* Output */
-+
-+#define GPIOD_FL_PWR_ON  		12	/* Output */
-+#define GPIOD_LCD_PWR4_ON		13	/* Output */
-+#define GPIOD_BL_KEYP_PWR_ON		14	/* Output */
-+#define GPIOD_BL_KEYB_PWR_ON		15	/* Output */
-+
-+extern struct platform_device htcuniversal_asic3;
-+
-+/* ASIC3 GPIO A bank */
-+
-+#define GPIO_I2C_EN	 	 	0*16+GPIOA_I2C_EN
-+#define GPIO_SPK_PWR1_ON	 	0*16+GPIOA_SPK_PWR1_ON
-+#define GPIO_AUDIO_PWR_ON	 	0*16+GPIOA_AUDIO_PWR_ON
-+#define GPIO_EARPHONE_PWR_ON	 	0*16+GPIOA_EARPHONE_PWR_ON
-+
-+#define GPIO_UNKNOWNA4			0*16+GPIOA_UNKNOWN4
-+#define GPIO_BUTTON_BACKLIGHT_N		0*16+GPIOA_BUTTON_BACKLIGHT_N
-+#define GPIO_SPK_PWR2_ON	 	0*16+GPIOA_SPK_PWR2_ON
-+#define GPIO_BUTTON_RECORD_N		0*16+GPIOA_BUTTON_RECORD_N
-+
-+#define GPIO_BUTTON_CAMERA_N		0*16+GPIOA_BUTTON_CAMERA_N
-+#define GPIO_UNKNOWNA9			0*16+GPIOA_UNKNOWN9
-+#define GPIO_FLASHLIGHT 		0*16+GPIOA_FLASHLIGHT
-+#define GPIO_COVER_ROTATE_N 		0*16+GPIOA_COVER_ROTATE_N
-+
-+#define GPIO_TOUCHSCREEN_N		0*16+GPIOA_TOUCHSCREEN_N
-+#define GPIO_VOL_UP_N  			0*16+GPIOA_VOL_UP_N
-+#define GPIO_VOL_DOWN_N 		0*16+GPIOA_VOL_DOWN_N
-+#define GPIO_LCD_PWR5_ON 		0*16+GPIOA_LCD_PWR5_ON
-+
-+/* ASIC3 GPIO B bank */
-+
-+#define GPIO_BB_READY			1*16+GPIOB_BB_READY
-+#define GPIO_CODEC_PDN			1*16+GPIOB_CODEC_PDN
-+#define GPIO_UNKNOWNB2			1*16+GPIOB_UNKNOWN2
-+#define GPIO_BB_UNKNOWN3		1*16+GPIOB_BB_UNKNOWN3
-+
-+#define GPIO_BT_IRQ			1*16+GPIOB_BT_IRQ
-+#define GPIO_CLAMSHELL_N		1*16+GPIOB_CLAMSHELL_N
-+#define GPIO_LCD_PWR3_ON		1*16+GPIOB_LCD_PWR3_ON
-+#define GPIO_BB_ALERT			1*16+GPIOB_BB_ALERT
-+
-+#define GPIO_BB_RESET2			1*16+GPIOB_BB_RESET2
-+#define GPIO_EARPHONE_N			1*16+GPIOB_EARPHONE_N
-+#define GPIO_MICRECORD_N		1*16+GPIOB_MICRECORD_N
-+#define GPIO_NIGHT_SENSOR		1*16+GPIOB_NIGHT_SENSOR
-+
-+#define GPIO_UMTS_DCD			1*16+GPIOB_UMTS_DCD
-+#define GPIO_UNKNOWNB13			1*16+GPIOB_UNKNOWN13
-+#define GPIO_CHARGE_EN 			1*16+GPIOB_CHARGE_EN
-+#define GPIO_USB_PUEN 			1*16+GPIOB_USB_PUEN
-+
-+/* ASIC3 GPIO C bank */
-+
-+#define GPIO_LED_BTWIFI  	   	2*16+GPIOC_LED_BTWIFI
-+#define GPIO_LED_RED		   	2*16+GPIOC_LED_RED
-+#define GPIO_LED_GREEN			2*16+GPIOC_LED_GREEN
-+#define GPIO_BOARDID3  			2*16+GPIOC_BOARDID3
-+
-+#define GPIO_WIFI_IRQ_N  		2*16+GPIOC_WIFI_IRQ_N
-+#define GPIO_WIFI_RESET  		2*16+GPIOC_WIFI_RESET
-+#define GPIO_WIFI_PWR1_ON  		2*16+GPIOC_WIFI_PWR1_ON
-+#define GPIO_BT_RESET  			2*16+GPIOC_BT_RESET
-+
-+#define GPIO_UNKNOWNC8  		2*16+GPIOC_UNKNOWN8
-+#define GPIO_LCD_PWR1_ON		2*16+GPIOC_LCD_PWR1_ON
-+#define GPIO_LCD_PWR2_ON 		2*16+GPIOC_LCD_PWR2_ON
-+#define GPIO_BOARDID2  			2*16+GPIOC_BOARDID2
-+
-+#define GPIO_BOARDID1			2*16+GPIOC_BOARDID1
-+#define GPIO_BOARDID0  			2*16+GPIOC_BOARDID0
-+#define GPIO_BT_PWR_ON			2*16+GPIOC_BT_PWR_ON
-+#define GPIO_CHARGE_ON			2*16+GPIOC_CHARGE_ON
-+
-+/* ASIC3 GPIO D bank */
-+
-+#define GPIO_KEY_OK_N			3*16+GPIOD_KEY_OK_N
-+#define GPIO_KEY_RIGHT_N		3*16+GPIOD_KEY_RIGHT_N
-+#define GPIO_KEY_LEFT_N			3*16+GPIOD_KEY_LEFT_N
-+#define GPIO_KEY_DOWN_N			3*16+GPIOD_KEY_DOWN_N
-+
-+#define GPIO_KEY_UP_N  			3*16+GPIOD_KEY_UP_N
-+#define GPIO_SDIO_DET			3*16+GPIOD_SDIO_DET
-+#define GPIO_WIFI_PWR2_ON		3*16+GPIOD_WIFI_PWR2_ON
-+#define GPIO_HW_REBOOT			3*16+GPIOD_HW_REBOOT
-+
-+#define GPIO_BB_RESET1			3*16+GPIOD_BB_RESET1
-+#define GPIO_UNKNOWND9			3*16+GPIOD_UNKNOWN9
-+#define GPIO_VIBRA_PWR_ON		3*16+GPIOD_VIBRA_PWR_ON
-+#define GPIO_WIFI_PWR3_ON		3*16+GPIOD_WIFI_PWR3_ON
-+
-+#define GPIO_FL_PWR_ON  		3*16+GPIOD_FL_PWR_ON
-+#define GPIO_LCD_PWR4_ON		3*16+GPIOD_LCD_PWR4_ON
-+#define GPIO_BL_KEYP_PWR_ON		3*16+GPIOD_BL_KEYP_PWR_ON
-+#define GPIO_BL_KEYB_PWR_ON		3*16+GPIOD_BL_KEYB_PWR_ON
-+
-+#define HTCUNIVERSAL_EGPIO_BASE	PXA_CS2_PHYS+0x02000000
-+
-+#define EGPIO4_ON			 4  /* something */
-+#define EGPIO5_BT_3V3_ON		 5  /* Bluetooth related */
-+#define EGPIO6_WIFI_ON			 6  /* WLAN related*/
-+
-+extern void htcuniversal_egpio_enable( u_int16_t bits );
-+extern void htcuniversal_egpio_disable( u_int16_t bits );
-+
-+#endif /* _HTCUNIVERSAL_ASIC_H_ */
-+
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/htcuniversal-gpio.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/htcuniversal-gpio.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,220 @@
-+/*
-+ * include/asm-arm/arch-pxa/htcuniversal-gpio.h
-+ * History:
-+ *
-+ * 2004-12-10 Michael Opdenacker. Wrote down GPIO settings as identified by Jamey Hicks.
-+ *            Reused the h2200-gpio.h file as a template.
-+ */
-+
-+#ifndef _HTCUNIVERSAL_GPIO_H_
-+#define _HTCUNIVERSAL_GPIO_H_
-+
-+#include <asm/arch/pxa-regs.h>
-+
-+#define GET_HTCUNIVERSAL_GPIO(gpio) \
-+	(GPLR(GPIO_NR_HTCUNIVERSAL_ ## gpio) & GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio))
-+
-+#define SET_HTCUNIVERSAL_GPIO(gpio, setp) \
-+do { \
-+if (setp) \
-+	GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \
-+else \
-+	GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \
-+} while (0)
-+
-+#define SET_HTCUNIVERSAL_GPIO_N(gpio, setp) \
-+do { \
-+if (setp) \
-+	GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \
-+else \
-+	GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \
-+} while (0)
-+
-+#define HTCUNIVERSAL_IRQ(gpio) \
-+	IRQ_GPIO(GPIO_NR_HTCUNIVERSAL_ ## gpio)
-+
-+#define GPIO_NR_HTCUNIVERSAL_KEY_ON_N			0
-+#define GPIO_NR_HTCUNIVERSAL_GP_RST_N			1
-+
-+#define GPIO_NR_HTCUNIVERSAL_USB_DET			9
-+#define GPIO_NR_HTCUNIVERSAL_POWER_DET			10
-+
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD7			12
-+#define GPIO_NR_HTCUNIVERSAL_ASIC3_SDIO_INT_N		13
-+#define GPIO_NR_HTCUNIVERSAL_ASIC3_EXT_INT		14
-+#define GPIO_NR_HTCUNIVERSAL_CS1_N			15
-+
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD6			17
-+#define GPIO_NR_HTCUNIVERSAL_RDY			18
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_START		19
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7			22
-+#define GPIO_NR_HTCUNIVERSAL_SPI_CLK			23
-+#define GPIO_NR_HTCUNIVERSAL_SPI_FRM			24
-+#define GPIO_NR_HTCUNIVERSAL_SPI_DO			25
-+#define GPIO_NR_HTCUNIVERSAL_SPI_DI			26
-+
-+#define GPIO_NR_HTCUNIVERSAL_CODEC_ON			27
-+#define GPIO_NR_HTCUNIVERSAL_I2S_BCK			28
-+#define GPIO_NR_HTCUNIVERSAL_I2S_DIN			29
-+#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT			30
-+#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC			31
-+
-+#define GPIO_NR_HTCUNIVERSAL_RS232_ON			32
-+#define GPIO_NR_HTCUNIVERSAL_CS5_N			33
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD			34
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS		35
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7			36
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3			37
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4			38
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD			39
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6			40
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS		41
-+#define GPIO_NR_HTCUNIVERSAL_BT_RXD			42
-+#define GPIO_NR_HTCUNIVERSAL_BT_TXD			43
-+#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS		44
-+#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS		45
-+
-+#define GPIO_NR_HTCUNIVERSAL_SIR_RXD			42
-+#define GPIO_NR_HTCUNIVERSAL_SIR_TXD			43
-+
-+#define GPIO_NR_HTCUNIVERSAL_POE_N			48
-+#define GPIO_NR_HTCUNIVERSAL_PWE_N			49
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD3			50
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD2			51
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD4			52
-+
-+#define GPIO_NR_HTCUNIVERSAL_CIF_MCLK			53
-+#define GPIO_NR_HTCUNIVERSAL_CIF_PCLK			54
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD1			55
-+
-+#define GPIO_NR_HTCUNIVERSAL_LDD0			58
-+#define GPIO_NR_HTCUNIVERSAL_LDD1			59
-+#define GPIO_NR_HTCUNIVERSAL_LDD2			60
-+#define GPIO_NR_HTCUNIVERSAL_LDD3			61
-+#define GPIO_NR_HTCUNIVERSAL_LDD4			62
-+#define GPIO_NR_HTCUNIVERSAL_LDD5			63
-+#define GPIO_NR_HTCUNIVERSAL_LDD6			64
-+#define GPIO_NR_HTCUNIVERSAL_LDD7			65
-+#define GPIO_NR_HTCUNIVERSAL_LDD8			66
-+#define GPIO_NR_HTCUNIVERSAL_LDD9			67
-+#define GPIO_NR_HTCUNIVERSAL_LDD10			68
-+#define GPIO_NR_HTCUNIVERSAL_LDD11			69
-+#define GPIO_NR_HTCUNIVERSAL_LDD12			70
-+#define GPIO_NR_HTCUNIVERSAL_LDD13			71
-+#define GPIO_NR_HTCUNIVERSAL_LDD14			72
-+#define GPIO_NR_HTCUNIVERSAL_LDD15			73
-+
-+#define GPIO_NR_HTCUNIVERSAL_LFCLK_RD			74
-+#define GPIO_NR_HTCUNIVERSAL_LFCLK_A0			75
-+#define GPIO_NR_HTCUNIVERSAL_LFCLK_WR			76
-+#define GPIO_NR_HTCUNIVERSAL_LBIAS			77
-+
-+#define GPIO_NR_HTCUNIVERSAL_CS2_N			78
-+#define GPIO_NR_HTCUNIVERSAL_CS3_N			79
-+#define GPIO_NR_HTCUNIVERSAL_CS4_N			80
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD0			81
-+#define GPIO_NR_HTCUNIVERSAL_CIF_DD5			82
-+
-+#define GPIO_NR_HTCUNIVERSAL_CIF_LV			84
-+#define GPIO_NR_HTCUNIVERSAL_CIF_FV			85
-+
-+#define GPIO_NR_HTCUNIVERSAL_LCD1			86
-+#define GPIO_NR_HTCUNIVERSAL_LCD2			87
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5			90
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6			91
-+
-+#define GPIO_NR_HTCUNIVERSAL_DREQ1			97
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_RESET		98
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0			100
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1			101
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2			102
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0			103
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1			104
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2			105
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3			106
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4			107
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5			108
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UNKNOWN 		109
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_OFF			110
-+
-+#define GPIO_NR_HTCUNIVERSAL_USB_PUEN			112
-+#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK			113
-+
-+#define GPIO_NR_HTCUNIVERSAL_PWM_OUT1			115
-+
-+#define GPIO_NR_HTCUNIVERSAL_I2C_SCL			117
-+#define GPIO_NR_HTCUNIVERSAL_I2C_SDA			118
-+
-+#if 0
-+#define GPIO_NR_HTCUNIVERSAL_CPU_BATT_FAULT_N
-+#define GPIO_NR_HTCUNIVERSAL_ASIC3_RESET_N
-+#define GPIO_NR_HTCUNIVERSAL_CHARGE_EN_N
-+#define GPIO_NR_HTCUNIVERSAL_FLASH_VPEN
-+#define GPIO_NR_HTCUNIVERSAL_BATT_OFF
-+#define GPIO_NR_HTCUNIVERSAL_USB_CHARGE_RATE
-+#define GPIO_NR_HTCUNIVERSAL_BL_DETECT_N
-+#define GPIO_NR_HTCUNIVERSAL_CPU_HW_RESET_N
-+#endif
-+
-+
-+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD	(23 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD	(24 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD	(25 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD	(26 | GPIO_ALT_FN_1_IN)
-+
-+#define GPIO_NR_HTCUNIVERSAL_I2S_BCK_MD			(28 | GPIO_ALT_FN_1_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_I2S_DIN_MD			(29 | GPIO_ALT_FN_2_IN)
-+#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT_MD		(30 | GPIO_ALT_FN_1_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC_MD		(31 | GPIO_ALT_FN_1_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD		(34 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD		(35 | GPIO_ALT_FN_1_IN)
-+
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD		(39 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD		(41 | GPIO_ALT_FN_2_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_BT_RXD_MD			(42 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_BT_TXD_MD			(43 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD		(44 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD		(45 | GPIO_ALT_FN_2_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_SIR_RXD_MD			(46 | GPIO_ALT_FN_2_IN)
-+#define GPIO_NR_HTCUNIVERSAL_SIR_TXD_MD			(47 | GPIO_ALT_FN_1_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_POE_N_MD			(48 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH)
-+#define GPIO_NR_HTCUNIVERSAL_PWE_N_MD			(49 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH)
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN0 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN1 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN2 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN3 | GPIO_ALT_FN_3_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN4 | GPIO_ALT_FN_2_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN5 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN6 | GPIO_ALT_FN_1_IN)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKIN7 | GPIO_ALT_FN_3_IN)
-+
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT0 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT1 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT2 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT3 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT4 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT5 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT6 | GPIO_ALT_FN_1_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD 		(GPIO_NR_HTCUNIVERSAL_KP_MKOUT7 | GPIO_ALT_FN_1_OUT)
-+
-+
-+#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK_MD		(113 | GPIO_ALT_FN_1_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_PWM1OUT_MD			(115 | GPIO_ALT_FN_3_OUT)
-+
-+#define GPIO_NR_HTCUNIVERSAL_I2C_SCL_MD			(117 | GPIO_ALT_FN_1_OUT)
-+#define GPIO_NR_HTCUNIVERSAL_I2C_SDA_MD			(118 | GPIO_ALT_FN_1_OUT)
-+
-+#endif /* _HTCUNIVERSAL_GPIO_H */
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/htcuniversal-init.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/htcuniversal-init.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,14 @@
-+/*
-+ * include/asm/arm/arch-pxa/htcuniversal-init.h
-+ *      Copyright (c) 2004 SDG Systems, LLC
-+ */
-+
-+#ifndef _HTCUNIVERSAL_INIT_H_
-+#define _HTCUNIVERSAL_INIT_H_
-+
-+/* htcuniversal initialization data should be found here
-+ * See -init.h files from other devices for details
-+ */
-+
-+#endif /* _HTCUNIVERSAL_INIT_H_ */
-+
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/htcuniversal.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/htcuniversal.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,3 @@
-+#include <asm/arch/irqs.h>
-+
-+#define HTCUNIVERSAL_ASIC3_IRQ_BASE IRQ_BOARD_START
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/pxa-pm_ll.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/pxa-pm_ll.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,6 @@
-+struct pxa_ll_pm_ops {
-+	void (*suspend)(unsigned long);
-+	void (*resume)(void);
-+};
-+
-+extern struct pxa_ll_pm_ops *pxa_pm_set_ll_ops(struct pxa_ll_pm_ops *new_ops);
-Index: linux-2.6.26-rc4/include/asm-arm/hardware/asic3_keys.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/hardware/asic3_keys.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,18 @@
-+#include <linux/input.h>
-+
-+struct asic3_keys_button {
-+	/* Configuration parameters */
-+	int keycode;
-+	int gpio;
-+	int active_low;
-+	char *desc;
-+	int type;
-+	/* Internal state vars - add below */
-+};
-+
-+struct asic3_keys_platform_data {
-+	struct asic3_keys_button *buttons;
-+	int nbuttons;
-+        struct input_dev *input;
-+        struct device *asic3_dev;
-+};
-Index: linux-2.6.26-rc4/include/asm-arm/hardware/asic3_leds.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/hardware/asic3_leds.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,34 @@
-+/*
-+ * LEDs support for HTC ASIC3 devices.
-+ *
-+ * Copyright (c) 2006  Anton Vorontsov <cbou@mail.ru>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+
-+struct asic3_leds_machinfo;
-+
-+struct asic3_led {
-+	struct led_classdev led_cdev;
-+	int hw_num;	/* Number of "hardware-accelerated" led */
-+	int gpio_num;	/* Number of GPIO if hw_num == -1 */
-+	struct asic3_leds_machinfo *machinfo;
-+};
-+
-+struct asic3_leds_machinfo {
-+	int num_leds;
-+	struct asic3_led *leds;
-+	struct platform_device *asic3_pdev;
-+};
-+
-+extern int asic3_leds_register(void);
-+extern void asic3_leds_unregister(void);
-+
-Index: linux-2.6.26-rc4/include/asm-arm/hardware/ipaq-asic3.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/hardware/ipaq-asic3.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,602 @@
-+/*
-+ *
-+ * Definitions for the HTC ASIC3 chip found in several handheld devices
-+ *
-+ * Copyright 2001 Compaq Computer Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-+ * FITNESS FOR ANY PARTICULAR PURPOSE.
-+ *
-+ * Author: Andrew Christian
-+ *
-+ */
-+
-+#ifndef IPAQ_ASIC3_H
-+#define IPAQ_ASIC3_H
-+
-+/****************************************************/
-+/* IPAQ, ASIC #3, replaces ASIC #1 */
-+
-+#define IPAQ_ASIC3_OFFSET(x,y) (_IPAQ_ASIC3_ ## x ## _Base + _IPAQ_ASIC3_ ## x ## _ ## y)
-+#define IPAQ_ASIC3_GPIO_OFFSET(x,y) (_IPAQ_ASIC3_GPIO_ ## x ## _Base + _IPAQ_ASIC3_GPIO_ ## y)
-+
-+
-+/* All offsets below are specified with the following address bus shift */
-+#define ASIC3_DEFAULT_ADDR_SHIFT 2
-+
-+#define _IPAQ_ASIC3_GPIO_A_Base      0x0000
-+#define _IPAQ_ASIC3_GPIO_B_Base      0x0100
-+#define _IPAQ_ASIC3_GPIO_C_Base      0x0200
-+#define _IPAQ_ASIC3_GPIO_D_Base      0x0300
-+
-+#define _IPAQ_ASIC3_GPIO_Mask          0x00    /* R/W 0:don't mask, 1:mask interrupt */
-+#define _IPAQ_ASIC3_GPIO_Direction     0x04    /* R/W 0:input, 1:output              */
-+#define _IPAQ_ASIC3_GPIO_Out           0x08    /* R/W 0:output low, 1:output high    */
-+#define _IPAQ_ASIC3_GPIO_TriggerType   0x0c    /* R/W 0:level, 1:edge                */
-+#define _IPAQ_ASIC3_GPIO_EdgeTrigger   0x10    /* R/W 0:falling, 1:rising            */
-+#define _IPAQ_ASIC3_GPIO_LevelTrigger  0x14    /* R/W 0:low, 1:high level detect     */
-+#define _IPAQ_ASIC3_GPIO_SleepMask     0x18    /* R/W 0:don't mask, 1:mask trigger in sleep mode  */
-+#define _IPAQ_ASIC3_GPIO_SleepOut      0x1c    /* R/W level 0:low, 1:high in sleep mode           */
-+#define _IPAQ_ASIC3_GPIO_BattFaultOut  0x20    /* R/W level 0:low, 1:high in batt_fault           */
-+#define _IPAQ_ASIC3_GPIO_IntStatus     0x24    /* R/W 0:none, 1:detect               */
-+#define _IPAQ_ASIC3_GPIO_AltFunction   0x28	/* R/W 0:normal control 1:LED register control */
-+#define _IPAQ_ASIC3_GPIO_SleepConf     0x2c    /* R/W bit 1: autosleep 0: disable gposlpout in normal mode, enable gposlpout in sleep mode */
-+#define _IPAQ_ASIC3_GPIO_Status        0x30    /* R   Pin status                                  */
-+
-+#define IPAQ_ASIC3_GPIO_A_MASK(_b)            IPAQ_ASIC3_GPIO( _b, u16, A, Mask )
-+#define IPAQ_ASIC3_GPIO_A_DIR(_b)             IPAQ_ASIC3_GPIO( _b, u16, A, Direction )
-+#define IPAQ_ASIC3_GPIO_A_OUT(_b)             IPAQ_ASIC3_GPIO( _b, u16, A, Out )
-+#define IPAQ_ASIC3_GPIO_A_LEVELTRI(_b)        IPAQ_ASIC3_GPIO( _b, u16, A, TriggerType )
-+#define IPAQ_ASIC3_GPIO_A_RISING(_b)          IPAQ_ASIC3_GPIO( _b, u16, A, EdgeTrigger )
-+#define IPAQ_ASIC3_GPIO_A_LEVEL(_b)           IPAQ_ASIC3_GPIO( _b, u16, A, LevelTrigger )
-+#define IPAQ_ASIC3_GPIO_A_SLEEP_MASK(_b)      IPAQ_ASIC3_GPIO( _b, u16, A, SleepMask )
-+#define IPAQ_ASIC3_GPIO_A_SLEEP_OUT(_b)       IPAQ_ASIC3_GPIO( _b, u16, A, SleepOut )
-+#define IPAQ_ASIC3_GPIO_A_BATT_FAULT_OUT(_b)  IPAQ_ASIC3_GPIO( _b, u16, A, BattFaultOut )
-+#define IPAQ_ASIC3_GPIO_A_INT_STATUS(_b)      IPAQ_ASIC3_GPIO( _b, u16, A, IntStatus )
-+#define IPAQ_ASIC3_GPIO_A_ALT_FUNCTION(_b)    IPAQ_ASIC3_GPIO( _b, u16, A, AltFunction )
-+#define IPAQ_ASIC3_GPIO_A_SLEEP_CONF(_b)      IPAQ_ASIC3_GPIO( _b, u16, A, SleepConf )
-+#define IPAQ_ASIC3_GPIO_A_STATUS(_b)          IPAQ_ASIC3_GPIO( _b, u16, A, Status )
-+
-+#define IPAQ_ASIC3_GPIO_B_MASK(_b)            IPAQ_ASIC3_GPIO( _b, u16, B, Mask )
-+#define IPAQ_ASIC3_GPIO_B_DIR(_b)             IPAQ_ASIC3_GPIO( _b, u16, B, Direction )
-+#define IPAQ_ASIC3_GPIO_B_OUT(_b)             IPAQ_ASIC3_GPIO( _b, u16, B, Out )
-+#define IPAQ_ASIC3_GPIO_B_LEVELTRI(_b)        IPAQ_ASIC3_GPIO( _b, u16, B, TriggerType )
-+#define IPAQ_ASIC3_GPIO_B_RISING(_b)          IPAQ_ASIC3_GPIO( _b, u16, B, EdgeTrigger )
-+#define IPAQ_ASIC3_GPIO_B_LEVEL(_b)           IPAQ_ASIC3_GPIO( _b, u16, B, LevelTrigger )
-+#define IPAQ_ASIC3_GPIO_B_SLEEP_MASK(_b)      IPAQ_ASIC3_GPIO( _b, u16, B, SleepMask )
-+#define IPAQ_ASIC3_GPIO_B_SLEEP_OUT(_b)       IPAQ_ASIC3_GPIO( _b, u16, B, SleepOut )
-+#define IPAQ_ASIC3_GPIO_B_BATT_FAULT_OUT(_b)  IPAQ_ASIC3_GPIO( _b, u16, B, BattFaultOut )
-+#define IPAQ_ASIC3_GPIO_B_INT_STATUS(_b)      IPAQ_ASIC3_GPIO( _b, u16, B, IntStatus )
-+#define IPAQ_ASIC3_GPIO_B_ALT_FUNCTION(_b)    IPAQ_ASIC3_GPIO( _b, u16, B, AltFunction )
-+#define IPAQ_ASIC3_GPIO_B_SLEEP_CONF(_b)      IPAQ_ASIC3_GPIO( _b, u16, B, SleepConf )
-+#define IPAQ_ASIC3_GPIO_B_STATUS(_b)          IPAQ_ASIC3_GPIO( _b, u16, B, Status )
-+
-+#define IPAQ_ASIC3_GPIO_C_MASK(_b)            IPAQ_ASIC3_GPIO( _b, u16, C, Mask )
-+#define IPAQ_ASIC3_GPIO_C_DIR(_b)             IPAQ_ASIC3_GPIO( _b, u16, C, Direction )
-+#define IPAQ_ASIC3_GPIO_C_OUT(_b)             IPAQ_ASIC3_GPIO( _b, u16, C, Out )
-+#define IPAQ_ASIC3_GPIO_C_LEVELTRI(_b)        IPAQ_ASIC3_GPIO( _b, u16, C, TriggerType )
-+#define IPAQ_ASIC3_GPIO_C_RISING(_b)          IPAQ_ASIC3_GPIO( _b, u16, C, EdgeTrigger )
-+#define IPAQ_ASIC3_GPIO_C_LEVEL(_b)           IPAQ_ASIC3_GPIO( _b, u16, C, LevelTrigger )
-+#define IPAQ_ASIC3_GPIO_C_SLEEP_MASK(_b)      IPAQ_ASIC3_GPIO( _b, u16, C, SleepMask )
-+#define IPAQ_ASIC3_GPIO_C_SLEEP_OUT(_b)       IPAQ_ASIC3_GPIO( _b, u16, C, SleepOut )
-+#define IPAQ_ASIC3_GPIO_C_BATT_FAULT_OUT(_b)  IPAQ_ASIC3_GPIO( _b, u16, C, BattFaultOut )
-+#define IPAQ_ASIC3_GPIO_C_INT_STATUS(_b)      IPAQ_ASIC3_GPIO( _b, u16, C, IntStatus )
-+#define IPAQ_ASIC3_GPIO_C_ALT_FUNCTION(_b)    IPAQ_ASIC3_GPIO( _b, u16, C, AltFunction )
-+#define IPAQ_ASIC3_GPIO_C_SLEEP_CONF(_b)      IPAQ_ASIC3_GPIO( _b, u16, C, SleepConf )
-+#define IPAQ_ASIC3_GPIO_C_STATUS(_b)          IPAQ_ASIC3_GPIO( _b, u16, C, Status )
-+
-+#define IPAQ_ASIC3_GPIO_D_MASK(_b)            IPAQ_ASIC3_GPIO( _b, u16, D, Mask )
-+#define IPAQ_ASIC3_GPIO_D_DIR(_b)             IPAQ_ASIC3_GPIO( _b, u16, D, Direction )
-+#define IPAQ_ASIC3_GPIO_D_OUT(_b)             IPAQ_ASIC3_GPIO( _b, u16, D, Out )
-+#define IPAQ_ASIC3_GPIO_D_LEVELTRI(_b)        IPAQ_ASIC3_GPIO( _b, u16, D, TriggerType )
-+#define IPAQ_ASIC3_GPIO_D_RISING(_b)          IPAQ_ASIC3_GPIO( _b, u16, D, EdgeTrigger )
-+#define IPAQ_ASIC3_GPIO_D_LEVEL(_b)           IPAQ_ASIC3_GPIO( _b, u16, D, LevelTrigger )
-+#define IPAQ_ASIC3_GPIO_D_SLEEP_MASK(_b)      IPAQ_ASIC3_GPIO( _b, u16, D, SleepMask )
-+#define IPAQ_ASIC3_GPIO_D_SLEEP_OUT(_b)       IPAQ_ASIC3_GPIO( _b, u16, D, SleepOut )
-+#define IPAQ_ASIC3_GPIO_D_BATT_FAULT_OUT(_b)  IPAQ_ASIC3_GPIO( _b, u16, D, BattFaultOut )
-+#define IPAQ_ASIC3_GPIO_D_INT_STATUS(_b)      IPAQ_ASIC3_GPIO( _b, u16, D, IntStatus )
-+#define IPAQ_ASIC3_GPIO_D_ALT_FUNCTION(_b)    IPAQ_ASIC3_GPIO( _b, u16, D, AltFunction )
-+#define IPAQ_ASIC3_GPIO_D_SLEEP_CONF(_b)      IPAQ_ASIC3_GPIO( _b, u16, D, SleepConf )
-+#define IPAQ_ASIC3_GPIO_D_STATUS(_b)          IPAQ_ASIC3_GPIO( _b, u16, D, Status )
-+
-+#define _IPAQ_ASIC3_SPI_Base		      0x0400
-+#define _IPAQ_ASIC3_SPI_Control               0x0000
-+#define _IPAQ_ASIC3_SPI_TxData                0x0004
-+#define _IPAQ_ASIC3_SPI_RxData                0x0008
-+#define _IPAQ_ASIC3_SPI_Int                   0x000c
-+#define _IPAQ_ASIC3_SPI_Status                0x0010
-+
-+#define IPAQ_ASIC3_SPI_Control(_b)            IPAQ_ASIC3( _b, u16, SPI, Control )
-+#define IPAQ_ASIC3_SPI_TxData(_b)             IPAQ_ASIC3( _b, u16, SPI, TxData )
-+#define IPAQ_ASIC3_SPI_RxData(_b)             IPAQ_ASIC3( _b, u16, SPI, RxData )
-+#define IPAQ_ASIC3_SPI_Int(_b)                IPAQ_ASIC3( _b, u16, SPI, Int )
-+#define IPAQ_ASIC3_SPI_Status(_b)             IPAQ_ASIC3( _b, u16, SPI, Status )
-+
-+#define SPI_CONTROL_SPR(clk)      ((clk) & 0x0f)  /* Clock rate */
-+
-+#define _IPAQ_ASIC3_PWM_0_Base                0x0500
-+#define _IPAQ_ASIC3_PWM_1_Base                0x0600
-+#define _IPAQ_ASIC3_PWM_TimeBase              0x0000
-+#define _IPAQ_ASIC3_PWM_PeriodTime            0x0004
-+#define _IPAQ_ASIC3_PWM_DutyTime              0x0008
-+
-+#define IPAQ_ASIC3_PWM_TimeBase(_b, x)        IPAQ_ASIC3_N( _b, u16, PWM, x, TimeBase )
-+#define IPAQ_ASIC3_PWM_PeriodTime(_b, x)      IPAQ_ASIC3_N( _b, u16, PWM, x, PeriodTime )
-+#define IPAQ_ASIC3_PWM_DutyTime(_b, x)        IPAQ_ASIC3_N( _b, u16, PWM, x, DutyTime )
-+
-+#define PWM_TIMEBASE_VALUE(x)    ((x)&0xf)   /* Low 4 bits sets time base */
-+#define PWM_TIMEBASE_ENABLE     (1 << 4)   /* Enable clock */
-+
-+#define _IPAQ_ASIC3_LED_0_Base                0x0700
-+#define _IPAQ_ASIC3_LED_1_Base                0x0800
-+#define _IPAQ_ASIC3_LED_2_Base 		      0x0900
-+#define _IPAQ_ASIC3_LED_TimeBase              0x0000    /* R/W  7 bits */
-+#define _IPAQ_ASIC3_LED_PeriodTime            0x0004    /* R/W 12 bits */
-+#define _IPAQ_ASIC3_LED_DutyTime              0x0008    /* R/W 12 bits */
-+#define _IPAQ_ASIC3_LED_AutoStopCount         0x000c    /* R/W 16 bits */
-+
-+#define IPAQ_ASIC3_LED_TimeBase(_b, x)         IPAQ_ASIC3_N( _b,  u8, LED, x, TimeBase )
-+#define IPAQ_ASIC3_LED_PeriodTime(_b, x)       IPAQ_ASIC3_N( _b, u16, LED, x, PeriodTime )
-+#define IPAQ_ASIC3_LED_DutyTime(_b, x)         IPAQ_ASIC3_N( _b, u16, LED, x, DutyTime )
-+#define IPAQ_ASIC3_LED_AutoStopCount(_b, x)    IPAQ_ASIC3_N( _b, u16, LED, x, AutoStopCount )
-+
-+/* LED TimeBase bits - match ASIC2 */
-+#define LED_TBS		0x0f		/* Low 4 bits sets time base, max = 13		*/
-+					/* Note: max = 5 on hx4700			*/
-+					/* 0: maximum time base				*/
-+					/* 1: maximum time base / 2			*/
-+					/* n: maximum time base / 2^n			*/
-+
-+#define LED_EN		(1 << 4)	/* LED ON/OFF 0:off, 1:on			*/
-+#define LED_AUTOSTOP	(1 << 5)	/* LED ON/OFF auto stop set 0:disable, 1:enable */
-+#define LED_ALWAYS	(1 << 6)	/* LED Interrupt Mask 0:No mask, 1:mask		*/
-+
-+#define _IPAQ_ASIC3_CLOCK_Base		0x0A00
-+#define _IPAQ_ASIC3_CLOCK_CDEX           0x00
-+#define _IPAQ_ASIC3_CLOCK_SEL            0x04
-+
-+#define IPAQ_ASIC3_CLOCK_CDEX(_b)         IPAQ_ASIC3( _b, u16, CLOCK, CDEX )
-+#define IPAQ_ASIC3_CLOCK_SEL(_b)          IPAQ_ASIC3( _b, u16, CLOCK, SEL )
-+
-+#define CLOCK_CDEX_SOURCE       (1 << 0)  /* 2 bits */
-+#define CLOCK_CDEX_SOURCE0      (1 << 0)
-+#define CLOCK_CDEX_SOURCE1      (1 << 1)
-+#define CLOCK_CDEX_SPI          (1 << 2)
-+#define CLOCK_CDEX_OWM          (1 << 3)
-+#define CLOCK_CDEX_PWM0         (1 << 4)
-+#define CLOCK_CDEX_PWM1         (1 << 5)
-+#define CLOCK_CDEX_LED0         (1 << 6)
-+#define CLOCK_CDEX_LED1         (1 << 7)
-+#define CLOCK_CDEX_LED2         (1 << 8)
-+
-+#define CLOCK_CDEX_SD_HOST      (1 << 9)   /* R/W: SD host clock source 24.576M/12.288M */
-+#define CLOCK_CDEX_SD_BUS       (1 << 10)  /* R/W: SD bus clock source control 24.576M/12.288M */
-+#define CLOCK_CDEX_SMBUS        (1 << 11)
-+#define CLOCK_CDEX_CONTROL_CX   (1 << 12)
-+
-+#define CLOCK_CDEX_EX0          (1 << 13)  /* R/W: 32.768 kHz crystal */
-+#define CLOCK_CDEX_EX1          (1 << 14)  /* R/W: 24.576 MHz crystal */
-+
-+#define CLOCK_SEL_SD_HCLK_SEL   (1 << 0)   /* R/W: SDIO host clock select  -  1: 24.576 Mhz, 0: 12.288 MHz */
-+#define CLOCK_SEL_SD_BCLK_SEL   (1 << 1)   /* R/W: SDIO bus clock select -  1: 24.576 MHz, 0: 12.288 MHz */
-+#define CLOCK_SEL_CX            (1 << 2)   /* R/W: INT clock source control (32.768 kHz) */
-+
-+
-+#define _IPAQ_ASIC3_INTR_Base		0x0B00
-+
-+#define _IPAQ_ASIC3_INTR_IntMask       0x00  /* Interrupt mask control */
-+#define _IPAQ_ASIC3_INTR_PIntStat      0x04  /* Peripheral interrupt status */
-+#define _IPAQ_ASIC3_INTR_IntCPS        0x08  /* Interrupt timer clock pre-scale */
-+#define _IPAQ_ASIC3_INTR_IntTBS        0x0c  /* Interrupt timer set */
-+
-+#define IPAQ_ASIC3_INTR_IntMask(_b)       IPAQ_ASIC3( _b, u8, INTR, IntMask )
-+#define IPAQ_ASIC3_INTR_PIntStat(_b)      IPAQ_ASIC3( _b, u8, INTR, PIntStat )
-+#define IPAQ_ASIC3_INTR_IntCPS(_b)        IPAQ_ASIC3( _b, u8, INTR, IntCPS )
-+#define IPAQ_ASIC3_INTR_IntTBS(_b)        IPAQ_ASIC3( _b, u16, INTR, IntTBS )
-+
-+#define ASIC3_INTMASK_GINTMASK    (1 << 0)  /* Global interrupt mask 1:enable */
-+#define ASIC3_INTMASK_GINTEL      (1 << 1)  /* 1: rising edge, 0: hi level */
-+#define ASIC3_INTMASK_MASK0       (1 << 2)
-+#define ASIC3_INTMASK_MASK1       (1 << 3)
-+#define ASIC3_INTMASK_MASK2       (1 << 4)
-+#define ASIC3_INTMASK_MASK3       (1 << 5)
-+#define ASIC3_INTMASK_MASK4       (1 << 6)
-+#define ASIC3_INTMASK_MASK5       (1 << 7)
-+
-+#define ASIC3_INTR_PERIPHERAL_A   (1 << 0)
-+#define ASIC3_INTR_PERIPHERAL_B   (1 << 1)
-+#define ASIC3_INTR_PERIPHERAL_C   (1 << 2)
-+#define ASIC3_INTR_PERIPHERAL_D   (1 << 3)
-+#define ASIC3_INTR_LED0           (1 << 4)
-+#define ASIC3_INTR_LED1           (1 << 5)
-+#define ASIC3_INTR_LED2           (1 << 6)
-+#define ASIC3_INTR_SPI            (1 << 7)
-+#define ASIC3_INTR_SMBUS          (1 << 8)
-+#define ASIC3_INTR_OWM            (1 << 9)
-+
-+#define ASIC3_INTR_CPS(x)         ((x)&0x0f)    /* 4 bits, max 14 */
-+#define ASIC3_INTR_CPS_SET        ( 1 << 4 )    /* Time base enable */
-+
-+
-+/* Basic control of the SD ASIC */
-+#define _IPAQ_ASIC3_SDHWCTRL_Base	0x0E00
-+
-+#define _IPAQ_ASIC3_SDHWCTRL_SDConf    0x00
-+#define IPAQ_ASIC3_SDHWCTRL_SDConf(_b)    IPAQ_ASIC3( _b, u8, SDHWCTRL, SDConf )
-+
-+#define ASIC3_SDHWCTRL_SUSPEND    (1 << 0)  /* 1=suspend all SD operations */
-+#define ASIC3_SDHWCTRL_CLKSEL     (1 << 1)  /* 1=SDICK, 0=HCLK */
-+#define ASIC3_SDHWCTRL_PCLR       (1 << 2)  /* All registers of SDIO cleared */
-+#define ASIC3_SDHWCTRL_LEVCD      (1 << 3)  /* Level of SD card detection: 1:high, 0:low */
-+#define ASIC3_SDHWCTRL_LEVWP      (1 << 4)  /* Level of SD card write protection: 1=low, 0=high */
-+#define ASIC3_SDHWCTRL_SDLED      (1 << 5)  /* SD card LED signal 1=enable, 0=disable */
-+#define ASIC3_SDHWCTRL_SDPWR      (1 << 6)  /* SD card power supply control 1=enable */
-+
-+
-+/* This is a pointer to an array of 12 u32 values - but only the lower 2 bytes matter */
-+/* Use it as "IPAQ_ASIC3_HWPROTECT_ARRAY[x]" */
-+
-+#define _IPAQ_ASIC3_HWPROTECT_Base	0x1000
-+#define IPAQ_ASIC3_HWPROTECT_ARRAY  ((volatile u32*)(_IPAQ_ASIC3_Base + _IPAQ_ASIC3_HWPROTECT_Base))
-+#define HWPROTECT_ARRAY_LEN 12
-+#define HWPROTECT_ARRAY_VALUES {0x4854,0x432d,0x5344,0x494f,0x2050,0x2f4e,0x3a33,0x3048,0x3830,0x3032,0x382d,0x3030}
-+
-+
-+#define _IPAQ_ASIC3_EXTCF_Base		0x1100
-+
-+#define _IPAQ_ASIC3_EXTCF_Select         0x00
-+#define _IPAQ_ASIC3_EXTCF_Reset          0x04
-+
-+#define IPAQ_ASIC3_EXTCF_Select(_b)    IPAQ_ASIC3( _b, u16, EXTCF, Select )
-+#define IPAQ_ASIC3_EXTCF_Reset(_b)     IPAQ_ASIC3( _b, u16, EXTCF, Reset )
-+
-+#define ASIC3_EXTCF_SMOD0	         (1 << 0)  /* slot number of mode 0 */
-+#define ASIC3_EXTCF_SMOD1	         (1 << 1)  /* slot number of mode 1 */
-+#define ASIC3_EXTCF_SMOD2	         (1 << 2)  /* slot number of mode 2 */
-+#define ASIC3_EXTCF_OWM_EN	         (1 << 4)  /* enable onewire module */
-+#define ASIC3_EXTCF_OWM_SMB	         (1 << 5)  /* OWM bus selection */
-+#define ASIC3_EXTCF_OWM_RESET            (1 << 6)  /* undocumented, used by OWM and CF */
-+#define ASIC3_EXTCF_CF0_SLEEP_MODE       (1 << 7)  /* CF0 sleep state control */
-+#define ASIC3_EXTCF_CF1_SLEEP_MODE       (1 << 8)  /* CF1 sleep state control */
-+#define ASIC3_EXTCF_CF0_PWAIT_EN         (1 << 10)  /* CF0 PWAIT_n control */
-+#define ASIC3_EXTCF_CF1_PWAIT_EN         (1 << 11)  /* CF1 PWAIT_n control */
-+#define ASIC3_EXTCF_CF0_BUF_EN           (1 << 12)  /* CF0 buffer control */
-+#define ASIC3_EXTCF_CF1_BUF_EN           (1 << 13)  /* CF1 buffer control */
-+#define ASIC3_EXTCF_SD_MEM_ENABLE        (1 << 14)
-+#define ASIC3_EXTCF_CF_SLEEP             (1 << 15)  /* CF sleep mode control */
-+
-+/*****************************************************************************
-+ *  The Onewire interface registers
-+ *
-+ *  OWM_CMD
-+ *  OWM_DAT
-+ *  OWM_INTR
-+ *  OWM_INTEN
-+ *  OWM_CLKDIV
-+ *
-+ *****************************************************************************/
-+
-+#define _IPAQ_ASIC3_OWM_Base		0xC00
-+
-+#define _IPAQ_ASIC3_OWM_CMD         0x00
-+#define _IPAQ_ASIC3_OWM_DAT         0x04
-+#define _IPAQ_ASIC3_OWM_INTR        0x08
-+#define _IPAQ_ASIC3_OWM_INTEN       0x0C
-+#define _IPAQ_ASIC3_OWM_CLKDIV      0x10
-+
-+#define ASIC3_OWM_CMD_ONEWR         (1 << 0)
-+#define ASIC3_OWM_CMD_SRA           (1 << 1)
-+#define ASIC3_OWM_CMD_DQO           (1 << 2)
-+#define ASIC3_OWM_CMD_DQI           (1 << 3)
-+
-+#define ASIC3_OWM_INTR_PD          (1 << 0)
-+#define ASIC3_OWM_INTR_PDR         (1 << 1)
-+#define ASIC3_OWM_INTR_TBE         (1 << 2)
-+#define ASIC3_OWM_INTR_TEMP        (1 << 3)
-+#define ASIC3_OWM_INTR_RBF         (1 << 4)
-+
-+#define ASIC3_OWM_INTEN_EPD        (1 << 0)
-+#define ASIC3_OWM_INTEN_IAS        (1 << 1)
-+#define ASIC3_OWM_INTEN_ETBE       (1 << 2)
-+#define ASIC3_OWM_INTEN_ETMT       (1 << 3)
-+#define ASIC3_OWM_INTEN_ERBF       (1 << 4)
-+
-+#define ASIC3_OWM_CLKDIV_PRE       (3 << 0) /* two bits wide at bit position 0 */
-+#define ASIC3_OWM_CLKDIV_DIV       (7 << 2) /* 3 bits wide at bit position 2 */
-+
-+
-+/*****************************************************************************
-+ *  The SD configuration registers are at a completely different location
-+ *  in memory.  They are divided into three sets of registers:
-+ *
-+ *  SD_CONFIG         Core configuration register
-+ *  SD_CTRL           Control registers for SD operations
-+ *  SDIO_CTRL         Control registers for SDIO operations
-+ *
-+ *****************************************************************************/
-+
-+#define IPAQ_ASIC3_SD_CONFIG(_b, s,x)   \
-+     (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CONFIG_Base + (_IPAQ_ASIC3_SD_CONFIG_ ## x))))
-+
-+#define _IPAQ_ASIC3_SD_CONFIG_Base            0x0400    // Assumes 32 bit addressing
-+
-+#define _IPAQ_ASIC3_SD_CONFIG_Command           0x08   /* R/W: Command */
-+#define _IPAQ_ASIC3_SD_CONFIG_Addr0             0x20   /* [9:31] SD Control Register Base Address */
-+#define _IPAQ_ASIC3_SD_CONFIG_Addr1             0x24   /* [9:31] SD Control Register Base Address */
-+#define _IPAQ_ASIC3_SD_CONFIG_IntPin            0x78   /* R/O: interrupt assigned to pin */
-+#define _IPAQ_ASIC3_SD_CONFIG_ClkStop           0x80   /* Set to 0x1f to clock SD controller, 0 otherwise. */
-+							/* at 0x82 - Gated Clock Control */
-+#define _IPAQ_ASIC3_SD_CONFIG_ClockMode         0x84   /* Control clock of SD controller */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus    0x88   /* R/0: read status of SD pins */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power1       0x90   /* Power1 - manual power control */
-+							/* Power2 is at 0x92 - auto power up after card inserted */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power3       0x94   /* auto power down when card removed */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect   0x98   /* */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Slot         0xA0   /* R/O: define support slot number */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1  0x1E0  /* Could be used for gated clock (don't use) */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk2  0x1E2  /* Could be used for gated clock (don't use) */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable  0x1E8  /* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_Status  0x1EC  /* GPIO Status Reg. */
-+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3  0x1F0  /* Bit 1: double buffer/single buffer */
-+
-+#define IPAQ_ASIC3_SD_CONFIG_Command(_b)           IPAQ_ASIC3_SD_CONFIG(_b, u16, Command )
-+#define IPAQ_ASIC3_SD_CONFIG_Addr0(_b)             IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr0 )
-+#define IPAQ_ASIC3_SD_CONFIG_Addr1(_b)             IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr1 )
-+#define IPAQ_ASIC3_SD_CONFIG_IntPin(_b)            IPAQ_ASIC3_SD_CONFIG(_b, u8, IntPin )
-+#define IPAQ_ASIC3_SD_CONFIG_ClkStop(_b)           IPAQ_ASIC3_SD_CONFIG(_b, u8, ClkStop )
-+#define IPAQ_ASIC3_SD_CONFIG_ClockMode(_b)         IPAQ_ASIC3_SD_CONFIG(_b, u8, ClockMode )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus(_b)    IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_PinStatus )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power1(_b)       IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power1 )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power3(_b)       IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power3 )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect(_b)   IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_CardDetect )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Slot(_b)         IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Slot )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1(_b)  IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk1 )
-+#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3(_b)  IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk3 )
-+
-+#define SD_CONFIG_
-+
-+#define SD_CONFIG_COMMAND_MAE                (1<<1)    /* Memory access enable (set to 1 to access SD Controller) */
-+
-+#define SD_CONFIG_CLK_ENABLE_ALL             0x1f
-+
-+#define SD_CONFIG_POWER1_PC_33V              0x0200    /* Set for 3.3 volts */
-+#define SD_CONFIG_POWER1_PC_OFF              0x0000    /* Turn off power */
-+
-+#define SD_CONFIG_CARDDETECTMODE_CLK           ((x)&0x3) /* two bits - number of cycles for card detection */
-+
-+
-+#define _IPAQ_ASIC3_SD_CTRL_Base            0x1000
-+
-+#define IPAQ_ASIC3_SD(_b, s,x)   \
-+     (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CTRL_Base + (_IPAQ_ASIC3_SD_CTRL_ ## x))))
-+
-+#define _IPAQ_ASIC3_SD_CTRL_Cmd                  0x00
-+#define _IPAQ_ASIC3_SD_CTRL_Arg0                 0x08
-+#define _IPAQ_ASIC3_SD_CTRL_Arg1                 0x0C
-+#define _IPAQ_ASIC3_SD_CTRL_StopInternal         0x10
-+#define _IPAQ_ASIC3_SD_CTRL_TransferSectorCount  0x14
-+#define _IPAQ_ASIC3_SD_CTRL_Response0            0x18
-+#define _IPAQ_ASIC3_SD_CTRL_Response1            0x1C
-+#define _IPAQ_ASIC3_SD_CTRL_Response2            0x20
-+#define _IPAQ_ASIC3_SD_CTRL_Response3            0x24
-+#define _IPAQ_ASIC3_SD_CTRL_Response4            0x28
-+#define _IPAQ_ASIC3_SD_CTRL_Response5            0x2C
-+#define _IPAQ_ASIC3_SD_CTRL_Response6            0x30
-+#define _IPAQ_ASIC3_SD_CTRL_Response7            0x34
-+#define _IPAQ_ASIC3_SD_CTRL_CardStatus           0x38
-+#define _IPAQ_ASIC3_SD_CTRL_BufferCtrl           0x3C
-+#define _IPAQ_ASIC3_SD_CTRL_IntMaskCard          0x40
-+#define _IPAQ_ASIC3_SD_CTRL_IntMaskBuffer        0x44
-+#define _IPAQ_ASIC3_SD_CTRL_CardClockCtrl        0x48
-+#define _IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen   0x4C
-+#define _IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup   0x50
-+#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus0         0x58
-+#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus1         0x5C
-+#define _IPAQ_ASIC3_SD_CTRL_DataPort             0x60
-+#define _IPAQ_ASIC3_SD_CTRL_TransactionCtrl      0x68
-+#define _IPAQ_ASIC3_SD_CTRL_SoftwareReset        0x1C0
-+
-+#define IPAQ_ASIC3_SD_CTRL_Cmd(_b)                  IPAQ_ASIC3_SD( _b, u16, Cmd )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Arg0(_b)                 IPAQ_ASIC3_SD( _b, u16, Arg0 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Arg1(_b)                 IPAQ_ASIC3_SD( _b, u16, Arg1 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_StopInternal(_b)         IPAQ_ASIC3_SD( _b, u16, StopInternal )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_TransferSectorCount(_b)  IPAQ_ASIC3_SD( _b, u16, TransferSectorCount )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response0(_b)            IPAQ_ASIC3_SD( _b, u16, Response0 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response1(_b)            IPAQ_ASIC3_SD( _b, u16, Response1 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response2(_b)            IPAQ_ASIC3_SD( _b, u16, Response2 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response3(_b)            IPAQ_ASIC3_SD( _b, u16, Response3 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response4(_b)            IPAQ_ASIC3_SD( _b, u16, Response4 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response5(_b)            IPAQ_ASIC3_SD( _b, u16, Response5 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response6(_b)            IPAQ_ASIC3_SD( _b, u16, Response6 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_Response7(_b)            IPAQ_ASIC3_SD( _b, u16, Response7 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_CardStatus(_b)           IPAQ_ASIC3_SD( _b, u16, CardStatus )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_BufferCtrl(_b)           IPAQ_ASIC3_SD( _b, u16, BufferCtrl )   /* and error status*/
-+#define IPAQ_ASIC3_SD_CTRL_IntMaskCard(_b)          IPAQ_ASIC3_SD( _b, u16, IntMaskCard )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_IntMaskBuffer(_b)        IPAQ_ASIC3_SD( _b, u16, IntMaskBuffer )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_CardClockCtrl(_b)        IPAQ_ASIC3_SD( _b, u16, CardClockCtrl )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen(_b)   IPAQ_ASIC3_SD( _b, u16, MemCardXferDataLen )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup(_b)   IPAQ_ASIC3_SD( _b, u16, MemCardOptionSetup )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_ErrorStatus0(_b)         IPAQ_ASIC3_SD( _b, u16, ErrorStatus0 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_ErrorStatus1(_b)         IPAQ_ASIC3_SD( _b, u16, ErrorStatus1 )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_DataPort(_b)             IPAQ_ASIC3_SD( _b, u16, DataPort )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_TransactionCtrl(_b)      IPAQ_ASIC3_SD( _b, u16, TransactionCtrl )   /* */
-+#define IPAQ_ASIC3_SD_CTRL_SoftwareReset(_b)        IPAQ_ASIC3_SD( _b, u16, SoftwareReset )   /* */
-+
-+#define SD_CTRL_SOFTWARE_RESET_CLEAR            (1<<0)
-+
-+#define SD_CTRL_TRANSACTIONCONTROL_SET          (1<<8) // 0x0100
-+
-+#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD    (1<<15)// 0x8000
-+#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK   (1<<8) // 0x0100
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512    (1<<7) // 0x0080
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256    (1<<6) // 0x0040
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128    (1<<5) // 0x0020
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64     (1<<4) // 0x0010
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32     (1<<3) // 0x0008
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16     (1<<2) // 0x0004
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8      (1<<1) // 0x0002
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4      (1<<0) // 0x0001
-+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2      (0<<0) // 0x0000
-+
-+#define MEM_CARD_OPTION_REQUIRED                   0x000e
-+#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x)   (((x)&0x0f)<<4)      /* Four bits */
-+#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT      (1<<14) // 0x4000
-+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1           (1<<15) // 0x8000
-+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4           (0<<15) //~0x8000
-+
-+#define SD_CTRL_COMMAND_INDEX(x)                   ((x)&0x3f)           /* 0=CMD0, 1=CMD1, ..., 63=CMD63 */
-+#define SD_CTRL_COMMAND_TYPE_CMD                   (0 << 6)
-+#define SD_CTRL_COMMAND_TYPE_ACMD                  (1 << 6)
-+#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION        (2 << 6)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL       (0 << 8)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1       (4 << 8)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B      (5 << 8)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2       (6 << 8)
-+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3       (7 << 8)
-+#define SD_CTRL_COMMAND_DATA_PRESENT               (1 << 11)
-+#define SD_CTRL_COMMAND_TRANSFER_READ              (1 << 12)
-+#define SD_CTRL_COMMAND_TRANSFER_WRITE             (0 << 12)
-+#define SD_CTRL_COMMAND_MULTI_BLOCK                (1 << 13)
-+#define SD_CTRL_COMMAND_SECURITY_CMD               (1 << 14)
-+
-+#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12         (1 << 0)
-+#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12     (1 << 8)
-+
-+#define SD_CTRL_CARDSTATUS_RESPONSE_END            (1 << 0)
-+#define SD_CTRL_CARDSTATUS_RW_END                  (1 << 2)
-+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0          (1 << 3)
-+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0         (1 << 4)
-+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0  (1 << 5)
-+#define SD_CTRL_CARDSTATUS_WRITE_PROTECT           (1 << 7)
-+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3          (1 << 8)
-+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3         (1 << 9)
-+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3  (1 << 10)
-+
-+#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR       (1 << 0) // 0x0001
-+#define SD_CTRL_BUFFERSTATUS_CRC_ERROR             (1 << 1) // 0x0002
-+#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR    (1 << 2) // 0x0004
-+#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT          (1 << 3) // 0x0008
-+#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW       (1 << 4) // 0x0010
-+#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW      (1 << 5) // 0x0020
-+#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT           (1 << 6) // 0x0040
-+#define SD_CTRL_BUFFERSTATUS_UNK7                  (1 << 7) // 0x0080
-+#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE    (1 << 8) // 0x0100
-+#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE   (1 << 9) // 0x0200
-+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION      (1 << 13)// 0x2000
-+#define SD_CTRL_BUFFERSTATUS_CMD_BUSY              (1 << 14)// 0x4000
-+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS        (1 << 15)// 0x8000
-+
-+#define SD_CTRL_INTMASKCARD_RESPONSE_END           (1 << 0) // 0x0001
-+#define SD_CTRL_INTMASKCARD_RW_END                 (1 << 2) // 0x0004
-+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0         (1 << 3) // 0x0008
-+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0        (1 << 4) // 0x0010
-+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5) // 0x0020
-+#define SD_CTRL_INTMASKCARD_UNK6                   (1 << 6) // 0x0040
-+#define SD_CTRL_INTMASKCARD_WRITE_PROTECT          (1 << 7) // 0x0080
-+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3         (1 << 8) // 0x0100
-+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3        (1 << 9) // 0x0200
-+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)// 0x0400
-+
-+#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR      (1 << 0) // 0x0001
-+#define SD_CTRL_INTMASKBUFFER_CRC_ERROR            (1 << 1) // 0x0002
-+#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR   (1 << 2) // 0x0004
-+#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT         (1 << 3) // 0x0008
-+#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW      (1 << 4) // 0x0010
-+#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW     (1 << 5) // 0x0020
-+#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT          (1 << 6) // 0x0040
-+#define SD_CTRL_INTMASKBUFFER_UNK7                 (1 << 7) // 0x0080
-+#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE   (1 << 8) // 0x0100
-+#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE  (1 << 9) // 0x0200
-+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION     (1 << 13)// 0x2000
-+#define SD_CTRL_INTMASKBUFFER_CMD_BUSY             (1 << 14)// 0x4000
-+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS       (1 << 15)// 0x8000
-+
-+#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR                   (1 << 0) // 0x0001
-+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2) // 0x0004
-+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12     (1 << 3) // 0x0008
-+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA          (1 << 4) // 0x0010
-+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS   (1 << 5) // 0x0020
-+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12     (1 << 8) // 0x0100
-+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12         (1 << 9) // 0x0200
-+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA              (1 << 10)// 0x0400
-+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD              (1 << 11)// 0x0800
-+
-+#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE                      (1 << 0) // 0x0001
-+#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA                    (1 << 4) // 0x0010
-+#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS                   (1 << 5) // 0x0020
-+#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY                     (1 << 6) // 0x0040
-+
-+#define _IPAQ_ASIC3_SDIO_CTRL_Base          0x1200
-+
-+#define IPAQ_ASIC3_SDIO(_b, s,x)   \
-+     (*((volatile s *) ((_b) + _IPAQ_ASIC3_SDIO_CTRL_Base + (_IPAQ_ASIC3_SDIO_CTRL_ ## x))))
-+
-+#define _IPAQ_ASIC3_SDIO_CTRL_Cmd                  0x00
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardPortSel          0x04
-+#define _IPAQ_ASIC3_SDIO_CTRL_Arg0                 0x08
-+#define _IPAQ_ASIC3_SDIO_CTRL_Arg1                 0x0C
-+#define _IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount   0x14
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response0            0x18
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response1            0x1C
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response2            0x20
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response3            0x24
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response4            0x28
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response5            0x2C
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response6            0x30
-+#define _IPAQ_ASIC3_SDIO_CTRL_Response7            0x34
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardStatus           0x38
-+#define _IPAQ_ASIC3_SDIO_CTRL_BufferCtrl           0x3C
-+#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskCard          0x40
-+#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer        0x44
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen      0x4C
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup      0x50
-+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0         0x54
-+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1         0x58
-+#define _IPAQ_ASIC3_SDIO_CTRL_DataPort             0x60
-+#define _IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl      0x68
-+#define _IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl          0x6C
-+#define _IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl       0x70
-+#define _IPAQ_ASIC3_SDIO_CTRL_HostInformation      0x74
-+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl            0x78
-+#define _IPAQ_ASIC3_SDIO_CTRL_LEDCtrl              0x7C
-+#define _IPAQ_ASIC3_SDIO_CTRL_SoftwareReset        0x1C0
-+
-+#define IPAQ_ASIC3_SDIO_CTRL_Cmd(_b)                  IPAQ_ASIC3_SDIO( _b, u16, Cmd )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardPortSel(_b)          IPAQ_ASIC3_SDIO( _b, u16, CardPortSel )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Arg0(_b)                 IPAQ_ASIC3_SDIO( _b, u16, Arg0 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Arg1(_b)                 IPAQ_ASIC3_SDIO( _b, u16, Arg1 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount(_b)   IPAQ_ASIC3_SDIO( _b, u16, TransferBlockCount )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response0(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response0 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response1(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response1 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response2(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response2 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response3(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response3 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response4(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response4 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response5(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response5 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response6(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response6 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_Response7(_b)            IPAQ_ASIC3_SDIO( _b, u16, Response7 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardStatus(_b)           IPAQ_ASIC3_SDIO( _b, u16, CardStatus )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_BufferCtrl(_b)           IPAQ_ASIC3_SDIO( _b, u16, BufferCtrl )   /* and error status*/
-+#define IPAQ_ASIC3_SDIO_CTRL_IntMaskCard(_b)          IPAQ_ASIC3_SDIO( _b, u16, IntMaskCard )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer(_b)        IPAQ_ASIC3_SDIO( _b, u16, IntMaskBuffer )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen(_b)      IPAQ_ASIC3_SDIO( _b, u16, CardXferDataLen )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup(_b)      IPAQ_ASIC3_SDIO( _b, u16, CardOptionSetup )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0(_b)         IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus0 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1(_b)         IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus1 )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_DataPort(_b)             IPAQ_ASIC3_SDIO( _b, u16, DataPort )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl(_b)      IPAQ_ASIC3_SDIO( _b, u16, TransactionCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl(_b)          IPAQ_ASIC3_SDIO( _b, u16, CardIntCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl(_b)       IPAQ_ASIC3_SDIO( _b, u16, ClocknWaitCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_HostInformation(_b)      IPAQ_ASIC3_SDIO( _b, u16, HostInformation )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl(_b)            IPAQ_ASIC3_SDIO( _b, u16, ErrorCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_LEDCtrl(_b)              IPAQ_ASIC3_SDIO( _b, u16, LEDCtrl )   /* */
-+#define IPAQ_ASIC3_SDIO_CTRL_SoftwareReset(_b)        IPAQ_ASIC3_SDIO( _b, u16, SoftwareReset )   /* */
-+
-+#define IPAQ_ASIC3_MAP_SIZE	     0x2000
-+
-+#endif
-Index: linux-2.6.26-rc4/include/linux/gpiodev.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/linux/gpiodev.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,44 @@
-+#ifndef __GPIODEV_H
-+#define __GPIODEV_H
-+
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <asm/gpio.h>
-+
-+/* Interface */
-+
-+/* This structure must be first member of device platform_data structure
-+   of a device which provides gpiodev interface. All method pointers
-+   must be non-NULL, so stubs must be used for non-implemented ones. */
-+struct gpiodev_ops {
-+        int (*get)(struct device *this, unsigned gpio_no);
-+        void (*set)(struct device *this, unsigned gpio_no, int val);
-+        int (*to_irq)(struct device *this, unsigned gpio_no);
-+};
-+
-+/* Generalized GPIO structure */
-+
-+struct gpio {
-+	struct device *gpio_dev;
-+	unsigned gpio_no;
-+};
-+
-+/* API functions */
-+
-+static inline int gpiodev_get_value(struct gpio *gpio)
-+{
-+	struct gpiodev_ops *ops = gpio->gpio_dev->platform_data;
-+	return ops->get(gpio->gpio_dev, gpio->gpio_no);
-+}
-+static inline void gpiodev_set_value(struct gpio *gpio, int val)
-+{
-+	struct gpiodev_ops *ops = gpio->gpio_dev->platform_data;
-+	ops->set(gpio->gpio_dev, gpio->gpio_no, val);
-+}
-+static inline int gpiodev_to_irq(struct gpio *gpio)
-+{
-+	struct gpiodev_ops *ops = gpio->gpio_dev->platform_data;
-+	return ops->to_irq(gpio->gpio_dev, gpio->gpio_no);
-+}
-+
-+#endif /* __GPIODEV_H */
-Index: linux-2.6.26-rc4/include/linux/input_pda.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/linux/input_pda.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,47 @@
-+#ifndef _INPUT_PDA_H
-+#define _INPUT_PDA_H
-+
-+/*
-+ * This is temporary virtual button key codes map
-+ * for keyboardless handheld computers.
-+ * Its purpose is to provide map common to all devices
-+ * and known to work with current software and its bugs
-+ * and misfeatures. Once issues with the software are
-+ * solved, codes from input.h will be used directly
-+ * (missing key definitions will be added).
-+ */
-+
-+/* Some directly usable keycodes:
-+KEY_POWER - Power/suspend button
-+KEY_ENTER - Enter/Action/Central button on joypad
-+KEY_UP
-+KEY_DOWN
-+KEY_LEFT
-+KEY_RIGHT
-+*/
-+
-+/* XXX Instead of using any values in include/linux/input.h, we have to use
-+       use values < 128 due to some munging that kdrive does to get keystrokes.
-+       When kdrive gets its key events from evdev instead of the console,
-+       we should be able to switch to using input.h values and get rid of
-+       xmodmap. */
-+
-+#define _KEY_APP1	KEY_F9		// xmodmap sees 67 + 8 = 75
-+#define _KEY_APP2	KEY_F10		// xmodmap 76
-+#define _KEY_APP3	KEY_F11		// xmodmap 95
-+#define _KEY_APP4	KEY_F12		// xmodmap 96
-+
-+#define _KEY_RECORD	KEY_RO
-+
-+/* It is highly recommended to use exactly 4 codes above for
-+   4 buttons the device has. This will ensure that console and
-+   framebuffer applications (e.g. games) will work ok on all
-+   devices. If you'd like more distinguishable names, following
-+   convenience defines are provided, suiting many devices. */
-+
-+#define _KEY_CALENDAR	_KEY_APP1
-+#define _KEY_CONTACTS	_KEY_APP2
-+#define _KEY_MAIL	_KEY_APP3
-+#define _KEY_HOMEPAGE	_KEY_APP4
-+
-+#endif
-Index: linux-2.6.26-rc4/include/linux/soc/asic3_base.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/linux/soc/asic3_base.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,104 @@
-+#include <asm/types.h>
-+#include <linux/gpiodev.h>
-+
-+/* Private API - for ASIC3 devices internal use only */
-+#define HDR_IPAQ_ASIC3_ACTION(ACTION,action,fn,FN)                  \
-+u32  asic3_get_gpio_ ## action ## _ ## fn (struct device *dev);      \
-+void asic3_set_gpio_ ## action ## _ ## fn (struct device *dev, u32 bits, u32 val);
-+
-+#define HDR_IPAQ_ASIC3_FN(fn,FN)					\
-+	HDR_IPAQ_ASIC3_ACTION ( MASK,mask,fn,FN)			\
-+	HDR_IPAQ_ASIC3_ACTION ( DIR, dir, fn, FN)			\
-+	HDR_IPAQ_ASIC3_ACTION ( OUT, out, fn, FN)			\
-+	HDR_IPAQ_ASIC3_ACTION ( LEVELTRI, trigtype, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( RISING, rising, fn, FN)			\
-+	HDR_IPAQ_ASIC3_ACTION ( LEVEL, triglevel, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( SLEEP_MASK, sleepmask, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( SLEEP_OUT, sleepout, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( BATT_FAULT_OUT, battfaultout, fn, FN)	\
-+	HDR_IPAQ_ASIC3_ACTION ( INT_STATUS, intstatus, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( ALT_FUNCTION, alt_fn, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( SLEEP_CONF, sleepconf, fn, FN)		\
-+	HDR_IPAQ_ASIC3_ACTION ( STATUS, status, fn, FN)
-+
-+/* Public API */
-+
-+#define ASIC3_GPIOA_IRQ_BASE	0
-+#define ASIC3_GPIOB_IRQ_BASE	16
-+#define ASIC3_GPIOC_IRQ_BASE	32
-+#define ASIC3_GPIOD_IRQ_BASE	48
-+#define ASIC3_LED0_IRQ		64
-+#define ASIC3_LED1_IRQ		65
-+#define ASIC3_LED2_IRQ		66
-+#define ASIC3_SPI_IRQ		67
-+#define ASIC3_SMBUS_IRQ		68
-+#define ASIC3_OWM_IRQ		69
-+
-+#define ASIC3_NR_GPIO_IRQS	64	/* 16 bits each GPIO A...D banks */
-+#define ASIC3_NR_IRQS		(ASIC3_OWM_IRQ + 1)
-+
-+extern int asic3_irq_base(struct device *dev);
-+
-+extern void asic3_write_register(struct device *dev, unsigned int reg,
-+                                 u32 value);
-+extern u32  asic3_read_register(struct device *dev, unsigned int reg);
-+
-+/* old clock api */
-+extern void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val);
-+extern u32  asic3_get_clock_cdex(struct device *dev);
-+extern void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val);
-+
-+extern void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val);
-+extern void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val);
-+extern void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val);
-+
-+extern void asic3_set_led(struct device *dev, int led_num, int duty_time,
-+                          int cycle_time, int timebase);
-+
-+extern int asic3_register_mmc(struct device *dev);
-+extern int asic3_unregister_mmc(struct device *dev);
-+
-+/* Accessors for GPIO banks */
-+HDR_IPAQ_ASIC3_FN(a, A)
-+HDR_IPAQ_ASIC3_FN(b, B)
-+HDR_IPAQ_ASIC3_FN(c, C)
-+HDR_IPAQ_ASIC3_FN(d, D)
-+
-+#define _IPAQ_ASIC3_GPIO_BANK_A      0
-+#define _IPAQ_ASIC3_GPIO_BANK_B      1
-+#define _IPAQ_ASIC3_GPIO_BANK_C      2
-+#define _IPAQ_ASIC3_GPIO_BANK_D      3
-+
-+#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf))
-+
-+extern int asic3_get_gpio_bit(struct device *dev, int gpio);
-+extern void asic3_set_gpio_bit(struct device *dev, int gpio, int val);
-+extern int asic3_gpio_get_value(struct device *dev, unsigned gpio);
-+extern void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val);
-+
-+
-+struct tmio_mmc_hwconfig;
-+
-+struct asic3_platform_data
-+{
-+	// Must be first member
-+	struct gpiodev_ops gpiodev_ops;
-+
-+	struct {
-+		u32 dir;
-+		u32 init;
-+		u32 sleep_mask;
-+		u32 sleep_out;
-+		u32 batt_fault_out;
-+		u32 sleep_conf;
-+		u32 alt_function;
-+	} gpio_a, gpio_b, gpio_c, gpio_d;
-+
-+	int irq_base;
-+	unsigned int bus_shift;
-+
-+	struct platform_device **child_platform_devs;
-+	int num_child_platform_devs;
-+
-+	struct tmio_mmc_hwconfig *tmio_mmc_hwconfig;
-+};
-Index: linux-2.6.26-rc4/include/linux/soc/tmio_mmc.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/linux/soc/tmio_mmc.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,17 @@
-+#include <linux/platform_device.h>
-+
-+#define MMC_CLOCK_DISABLED 0
-+#define MMC_CLOCK_ENABLED  1
-+
-+#define TMIO_WP_ALWAYS_RW ((void*)-1)
-+
-+struct tmio_mmc_hwconfig {
-+	void (*hwinit)(struct platform_device *sdev);
-+	void (*set_mmc_clock)(struct platform_device *sdev, int state);
-+
-+	/* NULL - use ASIC3 signal,
-+	   TMIO_WP_ALWAYS_RW - assume always R/W (e.g. miniSD)
-+	   otherwise - machine-specific handler */
-+	int (*mmc_get_ro)(struct platform_device *pdev);
-+	short address_shift;
-+};
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/pxa-regs.h
-===================================================================
---- linux-2.6.26-rc4.orig/include/asm-arm/arch-pxa/pxa-regs.h	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/pxa-regs.h	2008-06-01 18:49:45.000000000 +0100
-@@ -1117,6 +1117,8 @@
- #define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
- #define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
- 
-+#define LCCR4_13M_PCD_EN        (1<<25)          /* 13M PCD enable */
-+#define LCCR4_PCDDIV            (1<<31)          /* PCD selection */
- 
- /*
-  * Interrupt Controller
-Index: linux-2.6.26-rc4/drivers/mmc/host/Kconfig
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/mmc/host/Kconfig	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/mmc/host/Kconfig	2008-06-01 18:49:45.000000000 +0100
-@@ -130,3 +130,9 @@
- 
- 	  If unsure, or if your system has no SPI master driver, say N.
- 
-+config MMC_ASIC3
-+	tristate "HTC ASIC3 SD/MMC support"
-+	depends on MMC && HTC_ASIC3
-+	help
-+	  This provides support for the ASIC3 SD/MMC controller, used
-+	  in the iPAQ hx4700 and others.
-Index: linux-2.6.26-rc4/drivers/mmc/host/Makefile
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/mmc/host/Makefile	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/mmc/host/Makefile	2008-06-01 18:49:45.000000000 +0100
-@@ -13,6 +13,7 @@
- obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
- obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
- obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
-+obj-$(CONFIG_MMC_ASIC3)         += asic3_mmc.o
- obj-$(CONFIG_MMC_OMAP)		+= omap.o
- obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
- obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
-Index: linux-2.6.26-rc4/drivers/mmc/host/asic3_mmc.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/drivers/mmc/host/asic3_mmc.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,900 @@
-+/* Note that this driver can likely be merged into the tmio driver, so
-+ * consider this code temporary.  It works, though.
-+ */
-+/*
-+ *  linux/drivers/mmc/asic3_mmc.c
-+ *
-+ *  Copyright (c) 2005 SDG Systems, LLC
-+ *
-+ *  based on tmio_mmc.c
-+ *      Copyright (C) 2004 Ian Molton
-+ *
-+ *  Refactored to support all ASIC3 devices, 2006 Paul Sokolovsky
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Driver for the SD / SDIO cell found in:
-+ *
-+ * TC6393XB
-+ *
-+ * This driver draws mainly on scattered spec sheets, Reverse engineering
-+ * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
-+ * support).
-+ *
-+ * Supports MMC 1 bit transfers and SD 1 and 4 bit modes.
-+ *
-+ * TODO:
-+ *   Eliminate FIXMEs
-+ *   SDIO support
-+ *   Power management
-+ *   Handle MMC errors (at all)
-+ *
-+ */
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/blkdev.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/mmc/mmc.h>
-+#include <linux/mmc/host.h>
-+#include <linux/mmc/card.h>
-+//#include <linux/mmc/protocol.h>
-+#include <linux/mmc/sd.h>
-+#include <linux/scatterlist.h>
-+//#include <linux/soc-old.h>
-+#include <linux/soc/asic3_base.h>
-+#include <linux/soc/tmio_mmc.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/mach/irq.h>
-+#include <linux/clk.h>
-+#include <asm/mach-types.h>
-+
-+#include <asm/hardware/ipaq-asic3.h>
-+#include "asic3_mmc.h"
-+
-+struct asic3_mmc_host {
-+    void                    *ctl_base;
-+    struct device           *asic3_dev;       /* asic3 device */
-+    struct tmio_mmc_hwconfig *hwconfig;       /* HW config data/handlers, guaranteed != NULL */
-+    unsigned long           bus_shift;
-+    struct mmc_command      *cmd;
-+    struct mmc_request      *mrq;
-+    struct mmc_data         *data;
-+    struct mmc_host         *mmc;
-+    int                     irq;
-+    unsigned short          clock_for_sd;
-+
-+    /* I/O related stuff */
-+    struct scatterlist      *sg_ptr;
-+    unsigned int            sg_len;
-+    unsigned int            sg_off;
-+};
-+
-+static void
-+mmc_finish_request(struct asic3_mmc_host *host)
-+{
-+    struct mmc_request *mrq = host->mrq;
-+
-+    /* Write something to end the command */
-+    host->mrq  = NULL;
-+    host->cmd  = NULL;
-+    host->data = NULL;
-+
-+    mmc_request_done(host->mmc, mrq);
-+}
-+
-+
-+#define ASIC3_MMC_REG(host, block, reg) (*((volatile u16 *) ((host->ctl_base) + ((_IPAQ_ASIC3_## block ## _Base + _IPAQ_ASIC3_ ## block ## _ ## reg) >> (2 - host->bus_shift))) ))
-+
-+static void
-+mmc_start_command(struct asic3_mmc_host *host, struct mmc_command *cmd)
-+{
-+    struct mmc_data *data = host->data;
-+    int c                 = cmd->opcode;
-+
-+    DBG("Opcode: %d, base: %p\n", cmd->opcode, host->ctl_base);
-+
-+    if(cmd->opcode == MMC_STOP_TRANSMISSION) {
-+        ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12;
-+        cmd->resp[0] = cmd->opcode;
-+        cmd->resp[1] = 0;
-+        cmd->resp[2] = 0;
-+        cmd->resp[3] = 0;
-+        cmd->resp[4] = 0;
-+        return;
-+    }
-+
-+    switch(cmd->flags & 0x1f) {
-+        case MMC_RSP_NONE: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL; break;
-+        case MMC_RSP_R1:   c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1;   break;
-+        case MMC_RSP_R1B:  c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B;  break;
-+        case MMC_RSP_R2:   c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2;   break;
-+        case MMC_RSP_R3:   c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3;   break;
-+        default:
-+            DBG("Unknown response type %d\n", cmd->flags & 0x1f);
-+            break;
-+    }
-+
-+    host->cmd = cmd;
-+
-+    if(cmd->opcode == MMC_APP_CMD) {
-+        c |= APP_CMD;
-+    }
-+    if (cmd->opcode == MMC_GO_IDLE_STATE) {
-+        c |= (3 << 8); /* This was removed from ipaq-asic3.h for some reason */
-+    }
-+    if(data) {
-+        c |= SD_CTRL_COMMAND_DATA_PRESENT;
-+        if(data->blocks > 1) {
-+            ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12;
-+            c |= SD_CTRL_COMMAND_MULTI_BLOCK;
-+        }
-+        if(data->flags & MMC_DATA_READ) {
-+            c |= SD_CTRL_COMMAND_TRANSFER_READ;
-+        }
-+        /* MMC_DATA_WRITE does not require a bit to be set */
-+    }
-+
-+    /* Enable the command and data interrupts */
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~(
-+          SD_CTRL_INTMASKCARD_RESPONSE_END
-+        | SD_CTRL_INTMASKCARD_RW_END
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_0
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_0
-+#if 0
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_3
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_3
-+#endif
-+    );
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = ~(
-+          SD_CTRL_INTMASKBUFFER_UNK7
-+        | SD_CTRL_INTMASKBUFFER_CMD_BUSY
-+#if 0
-+        | SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR
-+        | SD_CTRL_INTMASKBUFFER_CRC_ERROR
-+        | SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR
-+        | SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT
-+        | SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW
-+        | SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW
-+        | SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT
-+        | SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE
-+        | SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE
-+        | SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS
-+#endif
-+    );
-+
-+    /* Send the command */
-+    ASIC3_MMC_REG(host, SD_CTRL, Arg1) = cmd->arg >> 16;
-+    ASIC3_MMC_REG(host, SD_CTRL, Arg0) = cmd->arg & 0xffff;
-+    ASIC3_MMC_REG(host, SD_CTRL, Cmd) = c;
-+}
-+
-+/* This chip always returns (at least?) as much data as you ask for.  I'm
-+ * unsure what happens if you ask for less than a block. This should be looked
-+ * into to ensure that a funny length read doesnt mess up the controller data
-+ * state machine.
-+ *
-+ * Aric: Statement above may not apply to ASIC3.
-+ *
-+ * FIXME - this chip cannot do 1 and 2 byte data requests in 4 bit mode
-+ *
-+ * Aric: Statement above may not apply to ASIC3.
-+ */
-+
-+static struct tasklet_struct mmc_data_read_tasklet;
-+
-+static void
-+mmc_data_transfer(unsigned long h)
-+{
-+    struct asic3_mmc_host *host = (struct asic3_mmc_host *)h;
-+    struct mmc_data *data = host->data;
-+    unsigned short *buf;
-+    int count;
-+    /* unsigned long flags; */
-+
-+    if(!data){
-+        printk(KERN_WARNING DRIVER_NAME ": Spurious Data IRQ\n");
-+        return;
-+    }
-+
-+    /* local_irq_save(flags); */
-+    /* buf = kmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */
-+    buf = kmap(host->sg_ptr->page);
-+    buf += host->sg_ptr->offset/2 + host->sg_off/2;
-+
-+    /*
-+     * Ensure we dont read more than one block. The chip will interrupt us
-+     * When the next block is available.
-+     */
-+    count = host->sg_ptr->length - host->sg_off;
-+    if(count > data->blksz) {
-+        count = data->blksz;
-+    }
-+
-+    DBG("count: %08x, page: %p, offset: %08x flags %08x\n",
-+        count, host->sg_ptr->page, host->sg_off, data->flags);
-+
-+    host->sg_off += count;
-+
-+    /* Transfer the data */
-+    if(data->flags & MMC_DATA_READ) {
-+        while(count > 0) {
-+            /* Read two bytes from SD/MMC controller. */
-+            *buf = ASIC3_MMC_REG(host, SD_CTRL, DataPort);
-+            buf++;
-+            count -= 2;
-+        }
-+	//flush_dcache_page(host->sg_ptr->page);
-+    } else {
-+        while(count > 0) {
-+            /* Write two bytes to SD/MMC controller. */
-+            ASIC3_MMC_REG(host, SD_CTRL, DataPort) = *buf;
-+            buf++;
-+            count -= 2;
-+        }
-+    }
-+
-+    /* kunmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */
-+    kunmap(host->sg_ptr->page);
-+    /* local_irq_restore(flags); */
-+    if(host->sg_off == host->sg_ptr->length) {
-+        host->sg_ptr++;
-+        host->sg_off = 0;
-+        --host->sg_len;
-+    }
-+
-+    return;
-+}
-+
-+static void
-+mmc_data_end_irq(struct asic3_mmc_host *host)
-+{
-+    struct mmc_data *data = host->data;
-+
-+    host->data = NULL;
-+
-+    if(!data){
-+        printk(KERN_WARNING DRIVER_NAME ": Spurious data end IRQ\n");
-+        return;
-+    }
-+
-+    if (data->error == MMC_ERR_NONE) {
-+        data->bytes_xfered = data->blocks * data->blksz;
-+    } else {
-+        data->bytes_xfered = 0;
-+    }
-+
-+    DBG("Completed data request\n");
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0;
-+
-+    /* Make sure read enable interrupt and write enable interrupt are disabled */
-+    if(data->flags & MMC_DATA_READ) {
-+        ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE;
-+    } else {
-+        ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE;
-+    }
-+
-+    mmc_finish_request(host);
-+}
-+
-+static void
-+mmc_cmd_irq(struct asic3_mmc_host *host, unsigned int buffer_stat)
-+{
-+    struct mmc_command *cmd = host->cmd;
-+    u8 *buf = (u8 *)cmd->resp;
-+    u16 data;
-+
-+    if(!host->cmd) {
-+        printk(KERN_WARNING DRIVER_NAME ": Spurious CMD irq\n");
-+        return;
-+    }
-+
-+    host->cmd = NULL;
-+    if(cmd->flags & MMC_RSP_PRESENT && cmd->flags & MMC_RSP_136) {
-+        /* R2 */
-+        buf[12] = 0xff;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response0);
-+        buf[13] = data & 0xff;
-+        buf[14] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response1);
-+        buf[15] = data & 0xff;
-+        buf[8] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response2);
-+        buf[9] = data & 0xff;
-+        buf[10] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response3);
-+        buf[11] = data & 0xff;
-+        buf[4] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response4);
-+        buf[5] = data & 0xff;
-+        buf[6] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response5);
-+        buf[7] = data & 0xff;
-+        buf[0] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response6);
-+        buf[1] = data & 0xff;
-+        buf[2] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response7);
-+        buf[3] = data & 0xff;
-+    } else if(cmd->flags & MMC_RSP_PRESENT) {
-+        /* R1, R1B, R3 */
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response0);
-+        buf[0] = data & 0xff;
-+        buf[1] = data >> 8;
-+        data = ASIC3_MMC_REG(host, SD_CTRL, Response1);
-+        buf[2] = data & 0xff;
-+        buf[3] = data >> 8;
-+    }
-+    DBG("Response: %08x %08x %08x %08x\n", cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-+
-+    if(buffer_stat & SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT) {
-+        cmd->error = MMC_ERR_TIMEOUT;
-+    } else if((buffer_stat & SD_CTRL_BUFFERSTATUS_CRC_ERROR) && (cmd->flags & MMC_RSP_CRC)) {
-+        cmd->error = MMC_ERR_BADCRC;
-+    } else if(buffer_stat &
-+                (
-+                      SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS
-+                    | SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR
-+                    | SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR
-+                    | SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW
-+                    | SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW
-+                    | SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT
-+                )
-+    ) {
-+        DBG("Buffer status ERROR 0x%04x - inside check buffer\n", buffer_stat);
-+        DBG("detail0 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0));
-+        DBG("detail1 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1));
-+        cmd->error = MMC_ERR_FAILED;
-+    }
-+
-+    if(cmd->error == MMC_ERR_NONE) {
-+        switch (cmd->opcode) {
-+            case SD_APP_SET_BUS_WIDTH:
-+                if(cmd->arg == SD_BUS_WIDTH_4) {
-+                    host->clock_for_sd = SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD;
-+                    ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) =
-+                              MEM_CARD_OPTION_REQUIRED
-+                            | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14)
-+                            | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT
-+                            | MEM_CARD_OPTION_DATA_XFR_WIDTH_4;
-+                } else {
-+                    host->clock_for_sd = 0;
-+                    ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) =
-+                              MEM_CARD_OPTION_REQUIRED
-+                            | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14)
-+                            | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT
-+                            | MEM_CARD_OPTION_DATA_XFR_WIDTH_1;
-+                }
-+                break;
-+            case MMC_SELECT_CARD:
-+                if((cmd->arg >> 16) == 0) {
-+                    /* We have been deselected. */
-+                    ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) =
-+                          MEM_CARD_OPTION_REQUIRED
-+                        | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14)
-+                        | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT
-+                        | MEM_CARD_OPTION_DATA_XFR_WIDTH_1;
-+                }
-+        }
-+    }
-+
-+    /*
-+     * If there is data to handle we enable data IRQs here, and we will
-+     * ultimatley finish the request in the mmc_data_end_irq handler.
-+     */
-+    if(host->data && (cmd->error == MMC_ERR_NONE)){
-+        if(host->data->flags & MMC_DATA_READ) {
-+            /* Enable the read enable interrupt */
-+            ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &=
-+                ~SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE;
-+        } else {
-+            /* Enable the write enable interrupt */
-+            ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &=
-+                ~SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE;
-+        }
-+    } else {
-+        /* There's no data, or we encountered an error, so finish now. */
-+        mmc_finish_request(host);
-+    }
-+
-+    return;
-+}
-+
-+static void hwinit2_irqsafe(struct asic3_mmc_host *host);
-+
-+static irqreturn_t
-+mmc_irq(int irq, void *irq_desc)
-+{
-+    struct asic3_mmc_host *host;
-+    unsigned int breg, bmask, bstatus, creg, cmask, cstatus;
-+
-+    host = irq_desc;
-+
-+    /* asic3 bstatus has errors */
-+    bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl);
-+    bmask   = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer);
-+    cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus);
-+    cmask   = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard);
-+    breg    = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS;
-+    creg    = cstatus & ~cmask & ~DONT_CARE_CARD_BITS;
-+
-+    if (!breg && !creg) {
-+        /* This occurs sometimes for no known reason.  It doesn't hurt
-+         * anything, so I don't print it.  */
-+        ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= ~breg;
-+        ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) &= ~creg;
-+        goto out;
-+    }
-+
-+    while (breg || creg) {
-+
-+        /* XXX TODO: Need to handle errors in breg here. */
-+
-+        /*
-+         * Card insert/remove.  The mmc controlling code is stateless.  That
-+         * is, it doesn't care if it was an insert or a remove.  It treats
-+         * both the same.
-+         */
-+        /* XXX Asic3 has _3 versions of these status bits, too, for a second slot, perhaps? */
-+        if (creg & (SD_CTRL_CARDSTATUS_CARD_INSERTED_0 | SD_CTRL_CARDSTATUS_CARD_REMOVED_0)) {
-+            ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &=
-+                ~(SD_CTRL_CARDSTATUS_CARD_REMOVED_0 | SD_CTRL_CARDSTATUS_CARD_INSERTED_0);
-+            if(creg & SD_CTRL_CARDSTATUS_CARD_INSERTED_0) {
-+                hwinit2_irqsafe(host);
-+            }
-+            mmc_detect_change(host->mmc,1);
-+        }
-+
-+        /* Command completion */
-+        if (creg & SD_CTRL_CARDSTATUS_RESPONSE_END) {
-+            ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &=
-+                ~(SD_CTRL_CARDSTATUS_RESPONSE_END);
-+            mmc_cmd_irq(host, bstatus);
-+        }
-+
-+        /* Data transfer */
-+        if (breg & (SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE)) {
-+            ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) &=
-+                ~(SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE);
-+	    tasklet_schedule(&mmc_data_read_tasklet);
-+        }
-+
-+        /* Data transfer completion */
-+        if (creg & SD_CTRL_CARDSTATUS_RW_END) {
-+            ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= ~(SD_CTRL_CARDSTATUS_RW_END);
-+            mmc_data_end_irq(host);
-+        }
-+
-+        /* Check status - keep going until we've handled it all */
-+        bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl);
-+        bmask   = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer);
-+        cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus);
-+        cmask   = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard);
-+        breg    = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS;
-+        creg    = cstatus & ~cmask & ~DONT_CARE_CARD_BITS;
-+    }
-+
-+out:
-+    /* Ensure all interrupt sources are cleared */
-+    ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0;
-+    return IRQ_HANDLED;
-+}
-+
-+static void
-+mmc_start_data(struct asic3_mmc_host *host, struct mmc_data *data)
-+{
-+    DBG("setup data transfer: blocksize %08x  nr_blocks %d, page: %08x, offset: %08x\n", data->blksz,
-+        data->blocks, (int)data->sg->page, data->sg->offset);
-+
-+    host->sg_len = data->sg_len;
-+    host->sg_ptr = data->sg;
-+    host->sg_off = 0;
-+    host->data   = data;
-+
-+    /* Set transfer length and blocksize */
-+    ASIC3_MMC_REG(host, SD_CTRL, TransferSectorCount) = data->blocks;
-+    ASIC3_MMC_REG(host, SD_CTRL, MemCardXferDataLen)  = data->blksz;
-+}
-+
-+/* Process requests from the MMC layer */
-+static void
-+mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+
-+    WARN_ON(host->mrq != NULL);
-+
-+    host->mrq = mrq;
-+
-+    /* If we're performing a data request we need to setup some
-+       extra information */
-+    if(mrq->data) {
-+        mmc_start_data(host, mrq->data);
-+    }
-+
-+    mmc_start_command(host, mrq->cmd);
-+}
-+
-+/* Set MMC clock / power.
-+ * Note: This controller uses a simple divider scheme therefore it cannot run
-+ * a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as MMC
-+ * wont run that fast, it has to be clocked at 12MHz which is the next slowest
-+ * setting.  This is likely not an issue because we are doing single 16-bit
-+ * writes for data I/O.
-+ */
-+static void
-+mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+    u32 clk = 0;
-+
-+    DBG("clock %uHz busmode %u powermode %u Vdd %u\n",
-+        ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-+
-+    if (ios->clock) {
-+        clk = 0x80; /* slowest by default */
-+        if(ios->clock >= 24000000 / 256) clk >>= 1;
-+        if(ios->clock >= 24000000 / 128) clk >>= 1;
-+        if(ios->clock >= 24000000 / 64)  clk >>= 1;
-+        if(ios->clock >= 24000000 / 32)  clk >>= 1;
-+        if(ios->clock >= 24000000 / 16)  clk >>= 1;
-+        if(ios->clock >= 24000000 / 8)   clk >>= 1;
-+        if(ios->clock >= 24000000 / 4)   clk >>= 1;
-+        if(ios->clock >= 24000000 / 2)   clk >>= 1;
-+        if(ios->clock >= 24000000 / 1)   clk >>= 1;
-+        if(clk == 0) { /* For fastest speed we disable the divider. */
-+            ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0;
-+        } else {
-+            ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 1;
-+        }
-+        ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+        ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) =
-+              host->clock_for_sd
-+            | SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK
-+            | clk;
-+        msleep(10);
-+    } else {
-+        ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+    }
-+
-+    switch (ios->power_mode) {
-+        case MMC_POWER_OFF:
-+            ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0;
-+            msleep(1);
-+            break;
-+        case MMC_POWER_UP:
-+            break;
-+        case MMC_POWER_ON:
-+            ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = SD_CONFIG_POWER1_PC_33V;
-+            msleep(20);
-+            break;
-+    }
-+}
-+
-+static int
-+mmc_get_ro(struct mmc_host *mmc)
-+{
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+
-+    /* Call custom handler for RO status */
-+    if(host->hwconfig->mmc_get_ro) {
-+            /* Special case for cards w/o WP lock (like miniSD) */
-+            if (host->hwconfig->mmc_get_ro == (void*)-1) {
-+		    return 0;
-+            } else {
-+		    struct platform_device *pdev = to_platform_device(mmc_dev(mmc));
-+        	    return host->hwconfig->mmc_get_ro(pdev);
-+            }
-+    }
-+
-+    /* WRITE_PROTECT is active low */
-+    return (ASIC3_MMC_REG(host, SD_CTRL, CardStatus) & SD_CTRL_CARDSTATUS_WRITE_PROTECT)?0:1;
-+}
-+
-+static struct mmc_host_ops mmc_ops = {
-+    .request        = mmc_request,
-+    .set_ios        = mmc_set_ios,
-+    .get_ro         = mmc_get_ro,
-+};
-+
-+static void
-+hwinit2_irqsafe(struct asic3_mmc_host *host)
-+{
-+    ASIC3_MMC_REG(host, SD_CONFIG, Addr1) = 0x0000;
-+    ASIC3_MMC_REG(host, SD_CONFIG, Addr0) = 0x0800;
-+
-+    ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = SD_CONFIG_CLKSTOP_ENABLE_ALL;
-+    ASIC3_MMC_REG(host, SD_CONFIG, SDHC_CardDetect) = 2;
-+    ASIC3_MMC_REG(host, SD_CONFIG, Command) = SD_CONFIG_COMMAND_MAE;
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 0; /* reset on */
-+    mdelay(2);
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 1; /* reset off */
-+    mdelay(2);
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) =
-+          MEM_CARD_OPTION_REQUIRED
-+        | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14)
-+        | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT
-+        | MEM_CARD_OPTION_DATA_XFR_WIDTH_1
-+        ;
-+    host->clock_for_sd = 0;
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0;
-+
-+    ASIC3_MMC_REG(host, SDIO_CTRL, ClocknWaitCtrl) = 0x100;
-+    /* *((unsigned short *)(((char *)host->ctl_base) + 0x938)) = 0x100; */
-+
-+    ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0;
-+    ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+
-+    mdelay(1);
-+
-+
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~(
-+          SD_CTRL_INTMASKCARD_RESPONSE_END
-+        | SD_CTRL_INTMASKCARD_RW_END
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_0
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_0
-+#if 0
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_3
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_3
-+#endif
-+        )
-+        ; /* check */
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = 0xffff;  /* IRQs off */
-+
-+    /*
-+     * ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = SD_CTRL_TRANSACTIONCONTROL_SET;
-+     *   Wince has 0x1000
-+     */
-+    /* ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = 0x1000; */
-+
-+
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SDPWR, ASIC3_SDHWCTRL_SDPWR); /* turn on power at controller(?) */
-+
-+}
-+
-+static void
-+hwinit(struct asic3_mmc_host *host, struct platform_device *pdev)
-+{
-+    /* Call custom handler for enabling clock (if needed) */
-+    if(host->hwconfig->set_mmc_clock)
-+            host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_ENABLED);
-+
-+    /* Not sure if it must be done bit by bit, but leaving as-is */
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVCD, ASIC3_SDHWCTRL_LEVCD);
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVWP, ASIC3_SDHWCTRL_LEVWP);
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0);
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_PCLR, 0);
-+
-+    asic3_set_clock_cdex (host->asic3_dev,
-+        CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0, CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0);
-+    msleep(1);
-+
-+    asic3_set_clock_sel (host->asic3_dev,
-+        CLOCK_SEL_SD_HCLK_SEL | CLOCK_SEL_SD_BCLK_SEL,
-+	CLOCK_SEL_SD_HCLK_SEL | 0);	/* ? */
-+
-+    asic3_set_clock_cdex (host->asic3_dev,
-+        CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS,
-+	CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS);
-+    msleep(1);
-+
-+    asic3_set_extcf_select(host->asic3_dev, ASIC3_EXTCF_SD_MEM_ENABLE, ASIC3_EXTCF_SD_MEM_ENABLE);
-+
-+    /* Long Delay */
-+    if( !machine_is_h4700())
-+        msleep(500);
-+
-+    hwinit2_irqsafe(host);
-+}
-+
-+#ifdef CONFIG_PM
-+static int
-+mmc_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+    struct mmc_host *mmc = platform_get_drvdata(pdev);
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+    int ret;
-+
-+    ret = mmc_suspend_host(mmc, state);
-+
-+    if (ret) {
-+	printk(KERN_ERR DRIVER_NAME ": Could not suspend MMC host, hardware not suspended");
-+	return ret;
-+    }
-+
-+    /* disable the card insert / remove interrupt while sleeping */
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~(
-+          SD_CTRL_INTMASKCARD_RESPONSE_END
-+        | SD_CTRL_INTMASKCARD_RW_END);
-+
-+    /* disable clock */
-+    ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0;
-+    ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = 0;
-+
-+    /* power down */
-+    ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0;
-+
-+    asic3_set_clock_cdex (host->asic3_dev,
-+        CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS, 0);
-+
-+    /* disable core clock */
-+    if(host->hwconfig->set_mmc_clock)
-+        host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_DISABLED);
-+
-+    /* Put in suspend mode */
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, ASIC3_SDHWCTRL_SUSPEND);
-+    return 0;
-+}
-+
-+static int
-+mmc_resume(struct platform_device *pdev)
-+{
-+    struct mmc_host *mmc = platform_get_drvdata(pdev);
-+    struct asic3_mmc_host *host = mmc_priv(mmc);
-+
-+    printk(KERN_INFO "%s: starting resume\n", DRIVER_NAME);
-+
-+    asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0);
-+    hwinit(host, pdev);
-+
-+    /* re-enable card remove / insert interrupt */
-+    ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~(
-+          SD_CTRL_INTMASKCARD_RESPONSE_END
-+        | SD_CTRL_INTMASKCARD_RW_END
-+        | SD_CTRL_INTMASKCARD_CARD_REMOVED_0
-+        | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 );
-+
-+    mmc_resume_host(mmc);
-+
-+    printk(KERN_INFO "%s: finished resume\n", DRIVER_NAME);
-+    return 0;
-+}
-+#endif
-+
-+static int
-+mmc_probe(struct platform_device *pdev)
-+{
-+    struct mmc_host *mmc;
-+    struct asic3_mmc_host *host = NULL;
-+    int retval = 0;
-+    struct tmio_mmc_hwconfig *mmc_config = (struct tmio_mmc_hwconfig *)pdev->dev.platform_data;
-+
-+    /* bus_shift is mandatory */
-+    if (!mmc_config) {
-+        printk(KERN_ERR DRIVER_NAME ": Invalid configuration\n");
-+    	return -EINVAL;
-+    }
-+
-+    mmc = mmc_alloc_host(sizeof(struct asic3_mmc_host) + 128, &pdev->dev);
-+    if (!mmc) {
-+        retval = -ENOMEM;
-+        goto exceptional_return;
-+    }
-+
-+    host = mmc_priv(mmc);
-+    host->mmc = mmc;
-+    platform_set_drvdata(pdev, mmc);
-+
-+    host->ctl_base = 0;
-+    host->hwconfig = mmc_config;
-+    host->bus_shift = mmc_config->address_shift;
-+    host->asic3_dev = pdev->dev.parent;
-+    host->clock_for_sd = 0;
-+
-+    tasklet_init(&mmc_data_read_tasklet, mmc_data_transfer, (unsigned long)host);
-+
-+    host->ctl_base = ioremap_nocache ((unsigned long)pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start);
-+    if(!host->ctl_base){
-+	printk(KERN_ERR DRIVER_NAME ": Could not map ASIC3 SD controller\n");
-+        retval = -ENODEV;
-+        goto exceptional_return;
-+    }
-+
-+    printk(DRIVER_NAME ": ASIC3 MMC/SD Driver, controller at 0x%lx\n", (unsigned long)pdev->resource[0].start);
-+
-+    mmc->ops = &mmc_ops;
-+    mmc->caps = MMC_CAP_4_BIT_DATA;
-+    mmc->f_min = 46875; /* ARIC: not sure what these should be */
-+    mmc->f_max = 24000000; /* ARIC: not sure what these should be */
-+    mmc->ocr_avail = MMC_VDD_32_33;
-+
-+    hwinit(host, pdev);
-+
-+
-+    host->irq = pdev->resource[1].start;
-+
-+    retval = request_irq(host->irq, mmc_irq, 0, DRIVER_NAME, host);
-+    if(retval) {
-+        printk(KERN_ERR DRIVER_NAME ": Unable to get interrupt\n");
-+        retval = -ENODEV;
-+        goto exceptional_return;
-+    }
-+    set_irq_type(host->irq, IRQT_FALLING);
-+
-+    mmc_add_host(mmc);
-+
-+#ifdef CONFIG_PM
-+    // resume_timer.function = resume_timer_callback;
-+    // resume_timer.data = 0;
-+    // init_timer(&resume_timer);
-+#endif
-+
-+    return 0;
-+
-+exceptional_return:
-+    if (mmc) {
-+        mmc_free_host(mmc);
-+    }
-+    if(host && host->ctl_base) iounmap(host->ctl_base);
-+    return retval;
-+}
-+
-+static int
-+mmc_remove(struct platform_device *pdev)
-+{
-+    struct mmc_host *mmc = platform_get_drvdata(pdev);
-+
-+    platform_set_drvdata(pdev, NULL);
-+
-+    if (mmc) {
-+        struct asic3_mmc_host *host = mmc_priv(mmc);
-+        mmc_remove_host(mmc);
-+        free_irq(host->irq, host);
-+        /* FIXME - we might want to consider stopping the chip here... */
-+        iounmap(host->ctl_base);
-+        mmc_free_host(mmc); /* FIXME - why does this call hang? */
-+    }
-+    return 0;
-+}
-+
-+/* ------------------- device registration ----------------------- */
-+
-+static struct platform_driver mmc_asic3_driver = {
-+    .driver = {
-+	.name    = DRIVER_NAME,
-+    },
-+    .probe   = mmc_probe,
-+    .remove  = mmc_remove,
-+#ifdef CONFIG_PM
-+    .suspend = mmc_suspend,
-+    .resume  = mmc_resume,
-+#endif
-+};
-+
-+static int __init mmc_init(void)
-+{
-+    return platform_driver_register(&mmc_asic3_driver);
-+}
-+
-+static void __exit mmc_exit(void)
-+{
-+    platform_driver_unregister(&mmc_asic3_driver);
-+}
-+
-+late_initcall(mmc_init);
-+module_exit(mmc_exit);
-+
-+MODULE_DESCRIPTION("HTC ASIC3 SD/MMC driver");
-+MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC");
-+MODULE_LICENSE("GPL");
-+
-Index: linux-2.6.26-rc4/drivers/mmc/host/asic3_mmc.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/drivers/mmc/host/asic3_mmc.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,25 @@
-+#ifndef __ASIC3_MMC_H
-+#define __ASIC3_MMC_H
-+
-+#define DRIVER_NAME	"asic3_mmc"
-+
-+#ifdef CONFIG_MMC_DEBUG
-+#define DBG(x...)       printk(DRIVER_NAME ": " x)
-+#else
-+#define DBG(x...)       do { } while (0)
-+#endif
-+
-+/* Response types */
-+#define APP_CMD        0x0040
-+
-+#define SD_CONFIG_CLKSTOP_ENABLE_ALL 0x1f
-+
-+#define DONT_CARE_CARD_BITS ( \
-+      SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 \
-+    | SD_CTRL_INTMASKCARD_WRITE_PROTECT \
-+    | SD_CTRL_INTMASKCARD_UNK6 \
-+    | SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 \
-+  )
-+#define DONT_CARE_BUFFER_BITS ( SD_CTRL_INTMASKBUFFER_UNK7 | SD_CTRL_INTMASKBUFFER_CMD_BUSY )
-+
-+#endif // __ASIC3_MMC_H
-Index: linux-2.6.26-rc4/drivers/input/keyboard/Makefile
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/input/keyboard/Makefile	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/input/keyboard/Makefile	2008-06-01 18:52:37.000000000 +0100
-@@ -15,6 +15,7 @@
- obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
- obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
- obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
-+obj-$(CONFIG_KEYBOARD_ASIC3)		+= asic3_keys.o
- obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
- obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
- obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
-Index: linux-2.6.26-rc4/drivers/input/keyboard/asic3_keys.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/drivers/input/keyboard/asic3_keys.c	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,131 @@
-+/*
-+ * Generic buttons driver for ASIC3 SoC.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * Copyright (C) 2003 Joshua Wise
-+ * Copyright (C) 2005 Pawel Kolodziejski
-+ * Copyright (C) 2006 Paul Sokolovsky
-+ *
-+ */
-+
-+#include <linux/input.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/soc/asic3_base.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/hardware.h>
-+#include <asm/hardware/ipaq-asic3.h>
-+#include <asm/hardware/asic3_keys.h>
-+
-+static irqreturn_t asic3_keys_asic_handle(int irq, void *data)
-+{
-+	struct asic3_keys_platform_data *pdata = data;
-+	int i, base_irq;
-+
-+	base_irq = asic3_irq_base(pdata->asic3_dev);
-+	for (i = 0; i < pdata->nbuttons; i++) {
-+		struct asic3_keys_button *b = &pdata->buttons[i];
-+		if ((base_irq + b->gpio) == irq) {
-+			int state = !!asic3_gpio_get_value(pdata->asic3_dev, b->gpio);
-+
-+			if (pdata->buttons[i].type == EV_SW)
-+				input_report_switch(pdata->input, pdata->buttons[i].keycode, state ^ b->active_low);
-+			else
-+				input_report_key(pdata->input, b->keycode, state ^ b->active_low);
-+			input_sync(pdata->input);
-+		}
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __devinit asic3_keys_probe(struct platform_device *pdev)
-+{
-+	struct asic3_keys_platform_data *pdata = pdev->dev.platform_data;
-+	int i, base_irq;
-+	int j, ret;
-+
-+	pdata->input = input_allocate_device();
-+
-+	base_irq = asic3_irq_base(pdata->asic3_dev);
-+
-+	for (i = 0; i < pdata->nbuttons; i++) {
-+		struct asic3_keys_button *b = &pdata->buttons[i];
-+		set_bit(b->keycode, pdata->input->keybit);
-+                ret=request_irq(base_irq + b->gpio, asic3_keys_asic_handle, SA_SAMPLE_RANDOM, b->desc, pdata);
-+                if (ret)
-+                {
-+                 printk(KERN_NOTICE "Failed to allocate asic3_keys irq=%d.\n",b->gpio);
-+
-+                 for(j=0; j<i ; j++)
-+                  free_irq(base_irq + pdata->buttons[i].gpio, NULL);
-+
-+                 input_unregister_device (pdata->input);
-+
-+                 return -ENODEV;
-+                }
-+
-+		set_irq_type(base_irq + b->gpio, IRQT_BOTHEDGE);
-+		if (pdata->buttons[i].type == EV_SW) {
-+			pdata->input->evbit[0] |= BIT(EV_SW);
-+			set_bit(b->keycode, pdata->input->swbit);
-+		} else {
-+			pdata->input->evbit[0] |= BIT(EV_KEY);
-+			set_bit(b->keycode, pdata->input->keybit);
-+		}
-+	}
-+
-+	pdata->input->name = pdev->name;
-+	input_register_device(pdata->input);
-+
-+	return 0;
-+}
-+
-+static int __devexit asic3_keys_remove(struct platform_device *pdev)
-+{
-+	struct asic3_keys_platform_data *pdata = pdev->dev.platform_data;
-+	int i, base_irq;
-+
-+	base_irq = asic3_irq_base(pdata->asic3_dev);
-+	for (i = 0; i < pdata->nbuttons; i++) {
-+		free_irq(base_irq + pdata->buttons[i].gpio, NULL);
-+	}
-+
-+	input_unregister_device(pdata->input);
-+
-+	return 0;
-+}
-+
-+
-+static struct platform_driver asic3_keys_driver = {
-+	.probe          = asic3_keys_probe,
-+        .remove         = __devexit_p(asic3_keys_remove),
-+	.driver		= {
-+	    .name       = "asic3-keys",
-+	},
-+};
-+
-+static int __init asic3_keys_init(void)
-+{
-+	return platform_driver_register(&asic3_keys_driver);
-+}
-+
-+static void __exit asic3_keys_exit(void)
-+{
-+	platform_driver_unregister(&asic3_keys_driver);
-+}
-+
-+module_init(asic3_keys_init);
-+module_exit(asic3_keys_exit);
-+
-+MODULE_AUTHOR("Joshua Wise, Pawel Kolodziejski, Paul Sokolovsky");
-+MODULE_DESCRIPTION("Buttons driver for HTC ASIC3 SoC");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/irqs.h
-===================================================================
---- linux-2.6.26-rc4.orig/include/asm-arm/arch-pxa/irqs.h	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/irqs.h	2008-06-01 18:49:45.000000000 +0100
-@@ -184,6 +184,8 @@
-       defined(CONFIG_MACH_PCM027) || \
-       defined(CONFIG_MACH_MAGICIAN)
- #define NR_IRQS			(IRQ_BOARD_END)
-+#elif defined(CONFIG_MACH_HTCUNIVERSAL)
-+#define NR_IRQS			(IRQ_BOARD_START + 96)
- #else
- #define NR_IRQS			(IRQ_BOARD_START)
- #endif
-Index: linux-2.6.26-rc4/include/linux/ioport.h
-===================================================================
---- linux-2.6.26-rc4.orig/include/linux/ioport.h	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/include/linux/ioport.h	2008-06-01 18:49:45.000000000 +0100
-@@ -59,6 +59,7 @@
- #define IORESOURCE_IRQ_HIGHLEVEL	(1<<2)
- #define IORESOURCE_IRQ_LOWLEVEL		(1<<3)
- #define IORESOURCE_IRQ_SHAREABLE	(1<<4)
-+#define IORESOURCE_IRQ_SOC_SUBDEVICE    (1<<5)
- 
- /* ISA PnP DMA specific bits (IORESOURCE_BITS) */
- #define IORESOURCE_DMA_TYPE_MASK	(3<<0)
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/serial.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/serial.h	2008-06-01 18:49:45.000000000 +0100
-@@ -0,0 +1,78 @@
-+/*
-+ *  linux/include/asm-arm/arch-pxa/serial.h
-+ *
-+ * Author:	Nicolas Pitre
-+ * Copyright:	(C) 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <asm/arch/pxa-regs.h>
-+
-+#define BAUD_BASE	921600
-+
-+/* Standard COM flags */
-+#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-+
-+#define STD_SERIAL_PORT_DEFNS	\
-+	{	\
-+		type:			PORT_PXA,	\
-+		xmit_fifo_size:		64,		\
-+		baud_base:		BAUD_BASE,	\
-+		iomem_base:		&FFUART,	\
-+		iomem_reg_shift:	2,		\
-+		io_type:		SERIAL_IO_MEM,	\
-+		irq:			IRQ_FFUART,	\
-+		flags:			STD_COM_FLAGS,	\
-+	}, {	\
-+		type:			PORT_PXA,	\
-+		xmit_fifo_size:		64,		\
-+		baud_base:		BAUD_BASE,	\
-+		iomem_base:		&STUART,	\
-+		iomem_reg_shift:	2,		\
-+		io_type:		SERIAL_IO_MEM,	\
-+		irq:			IRQ_STUART,	\
-+		flags:			STD_COM_FLAGS,	\
-+	}, {	\
-+		type:			PORT_PXA,	\
-+		xmit_fifo_size:		64,		\
-+		baud_base:		BAUD_BASE,	\
-+		iomem_base:		&BTUART,	\
-+		iomem_reg_shift:	2,		\
-+		io_type:		SERIAL_IO_MEM,	\
-+		irq:			IRQ_BTUART,	\
-+		flags:			STD_COM_FLAGS,	\
-+	}
-+
-+#define EXTRA_SERIAL_PORT_DEFNS
-+
-+struct platform_pxa_serial_funcs {
-+
-+	/* Initialize whatever is connected to this serial port. */
-+	void (*configure)(int state);
-+#define PXA_UART_CFG_PRE_STARTUP   0
-+#define PXA_UART_CFG_POST_STARTUP  1
-+#define PXA_UART_CFG_PRE_SHUTDOWN  2
-+#define PXA_UART_CFG_POST_SHUTDOWN 3
-+
-+	/* Enable or disable the individual transmitter/receiver submodules.
-+	 * On transceivers without echo cancellation (e.g. SIR)
-+	 * transmitter always has priority; e.g. if both bits are set,
-+	 * only the transmitter is enabled. */
-+        void (*set_txrx)(int txrx);
-+#define PXA_SERIAL_TX 1
-+#define PXA_SERIAL_RX 2
-+
-+	/* Get the current state of tx/rx. */
-+	int (*get_txrx)(void);
-+
-+	int (*suspend)(struct platform_device *dev, pm_message_t state);
-+	int (*resume)(struct platform_device *dev);
-+};
-+
-+void pxa_set_ffuart_info(struct platform_pxa_serial_funcs *ffuart_funcs);
-+void pxa_set_btuart_info(struct platform_pxa_serial_funcs *btuart_funcs);
-+void pxa_set_stuart_info(struct platform_pxa_serial_funcs *stuart_funcs);
-+void pxa_set_hwuart_info(struct platform_pxa_serial_funcs *hwuart_funcs);
-Index: linux-2.6.26-rc4/drivers/serial/pxa.c
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/serial/pxa.c	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/serial/pxa.c	2008-06-01 18:49:45.000000000 +0100
-@@ -47,6 +47,7 @@
- #include <asm/io.h>
- #include <asm/hardware.h>
- #include <asm/irq.h>
-+#include <asm/arch/serial.h>
- #include <asm/arch/pxa-regs.h>
- 
- 
-@@ -60,6 +61,14 @@
- 	char			*name;
- };
- 
-+
-+#define IS_METHOD(dev, method) (dev && (dev)->platform_data && ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method)
-+#define METHOD_CALL(dev, method) \
-+		((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method()
-+#define SAFE_METHOD_CALL(dev, method, args...) \
-+	if (IS_METHOD(dev, method)) \
-+		((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method(args)
-+
- static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
- {
- 	offset <<= 2;
-@@ -347,6 +356,9 @@
- 	unsigned long flags;
- 	int retval;
- 
-+	/* Perform platform-specific port initialization, if needed. */
-+	SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_STARTUP);
-+
- 	if (port->line == 3) /* HWUART */
- 		up->mcr |= UART_MCR_AFE;
- 	else
-@@ -404,6 +416,12 @@
- 	(void) serial_in(up, UART_IIR);
- 	(void) serial_in(up, UART_MSR);
- 
-+	/*
-+	 * Perform platform-specific port initialization if needed
-+	 */
-+	SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_STARTUP);
-+	SAFE_METHOD_CALL(port->dev, set_txrx, PXA_SERIAL_RX);
-+
- 	return 0;
- }
- 
-@@ -412,6 +430,8 @@
- 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
- 	unsigned long flags;
- 
-+	SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_SHUTDOWN);
-+
- 	free_irq(up->port.irq, up);
- 
- 	/*
-@@ -433,6 +453,8 @@
- 				  UART_FCR_CLEAR_RCVR |
- 				  UART_FCR_CLEAR_XMIT);
- 	serial_out(up, UART_FCR, 0);
-+
-+	SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_SHUTDOWN);
- }
- 
- static void
-Index: linux-2.6.26-rc4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/leds/Makefile	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/leds/Makefile	2008-06-01 18:49:45.000000000 +0100
-@@ -14,6 +14,7 @@
- obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
-+obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
- obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
- obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
- obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
-Index: linux-2.6.26-rc4/drivers/input/keyboard/Kconfig
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/input/keyboard/Kconfig	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/input/keyboard/Kconfig	2008-06-01 18:52:13.000000000 +0100
-@@ -132,6 +132,13 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called stowaway.
- 
-+config KEYBOARD_ASIC3
-+	tristate "Buttons on ASIC3 SoC GPIOs (iPaqs, etc.)"
-+	depends on HTC_ASIC3
-+	help
-+	  This enables support for the buttons attached to GPIOs of
-+	  HTC ASIC3 peripheral controller.
-+ 
- config KEYBOARD_CORGI
- 	tristate "Corgi keyboard"
- 	depends on PXA_SHARPSL
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/htcuniversal/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/htcuniversal/defconfig
deleted file mode 100644
index e9d5dc1e22..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/htcuniversal/defconfig
+++ /dev/null
@@ -1,1309 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Sun Jan 20 21:46:02 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_DMABOUNCE=y
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-CONFIG_ARCH_LUBBOCK=y
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SA1111=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   dyntick=enable debug"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-CONFIG_CPU_FREQ_PXA25x=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-# CONFIG_SUSPEND is not set
-CONFIG_APM_EMULATION=y
-CONFIG_INPUT_APMPOWER=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=y
-# CONFIG_IRNET is not set
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=y
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_PXA_FICP=y
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-CONFIG_ACX=m
-CONFIG_ACX_MEM=y
-# CONFIG_ACX_CS is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_POWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_ASIC3=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-CONFIG_W1_MASTER_DS1WM=y
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_ASIC3=y
-CONFIG_HTC_ASIC3_DS1WM=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_LCD_QVGA=y
-# CONFIG_FB_PXA_LCD_VGA is not set
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_OHAND_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-CONFIG_MMC_ASIC3=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_ASIC3=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/hx2000/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/hx2000/defconfig
deleted file mode 100644
index 1fcf2bb910..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/hx2000/defconfig
+++ /dev/null
@@ -1,1733 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Sun Jan 20 18:10:53 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_MACH_HX2750=y
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_KEYS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   dyntick=enable debug"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTSDIO is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-# CONFIG_ATMEL is not set
-CONFIG_AIRO_CS=m
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_CS=m
-# CONFIG_ZD1211RW is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_POWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_TOUCHSCREEN_TSC2101=y
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_MFD_TSC2101=y
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_USB_DSBR=m
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_LCD_QVGA=y
-# CONFIG_FB_PXA_LCD_VGA is not set
-CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_OHAND_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
-CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/pxa-serial-hack.patch b/packages/kexecboot/linux-kexecboot-2.6.26/pxa-serial-hack.patch
deleted file mode 100644
index bf20f46a05..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/pxa-serial-hack.patch
+++ /dev/null
@@ -1,90 +0,0 @@
----
- drivers/serial/8250.c        |    5 +++++
- drivers/serial/serial_core.c |    1 +
- drivers/serial/serial_cs.c   |   12 +++++++++---
- include/linux/serial_core.h  |    1 +
- 4 files changed, 16 insertions(+), 3 deletions(-)
-
-Index: linux-2.6.20/drivers/serial/8250.c
-===================================================================
---- linux-2.6.20.orig/drivers/serial/8250.c	2007-04-27 13:37:26.000000000 +0100
-+++ linux-2.6.20/drivers/serial/8250.c	2007-04-27 13:38:16.000000000 +0100
-@@ -2429,7 +2429,12 @@
- 	.driver_name		= "serial",
- 	.dev_name		= "ttyS",
- 	.major			= TTY_MAJOR,
-+#ifdef CONFIG_SERIAL_PXA
-+	.minor			= 64 + 4,
-+	.name_base		= 4,
-+#else
- 	.minor			= 64,
-+#endif
- 	.nr			= UART_NR,
- 	.cons			= SERIAL8250_CONSOLE,
- };
-Index: linux-2.6.20/drivers/serial/serial_core.c
-===================================================================
---- linux-2.6.20.orig/drivers/serial/serial_core.c	2007-02-04 18:44:54.000000000 +0000
-+++ linux-2.6.20/drivers/serial/serial_core.c	2007-04-27 13:39:39.000000000 +0100
-@@ -2068,7 +2068,8 @@
- 	printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
- 	       port->dev ? port->dev->bus_id : "",
- 	       port->dev ? ": " : "",
--	       drv->dev_name, port->line, address, port->irq, uart_type(port));
-+	       drv->dev_name, port->line + drv->name_base, address, port->irq,
-+	       uart_type(port));
- }
- 
- static void
-@@ -2183,6 +2184,7 @@
- 	normal->owner		= drv->owner;
- 	normal->driver_name	= drv->driver_name;
- 	normal->name		= drv->dev_name;
-+	normal->name_base	= drv->name_base;
- 	normal->major		= drv->major;
- 	normal->minor_start	= drv->minor;
- 	normal->type		= TTY_DRIVER_TYPE_SERIAL;
-Index: linux-2.6.20/include/linux/serial_core.h
-===================================================================
---- linux-2.6.20.orig/include/linux/serial_core.h	2007-02-04 18:44:54.000000000 +0000
-+++ linux-2.6.20/include/linux/serial_core.h	2007-04-27 13:37:27.000000000 +0100
-@@ -341,6 +341,7 @@
- 	struct module		*owner;
- 	const char		*driver_name;
- 	const char		*dev_name;
-+	int			 name_base;
- 	int			 major;
- 	int			 minor;
- 	int			 nr;
-Index: linux-2.6.20/drivers/serial/serial_cs.c
-===================================================================
---- linux-2.6.20.orig/drivers/serial/serial_cs.c	2007-02-04 18:44:54.000000000 +0000
-+++ linux-2.6.20/drivers/serial/serial_cs.c	2007-04-27 13:40:34.000000000 +0100
-@@ -390,7 +390,7 @@
- 			kio_addr_t iobase, int irq)
- {
- 	struct uart_port port;
--	int line;
-+	int line, linestart;
- 
- 	memset(&port, 0, sizeof (struct uart_port));
- 	port.iobase = iobase;
-@@ -411,10 +411,16 @@
- 		return -EINVAL;
- 	}
- 
-+#if CONFIG_SERIAL_PXA
-+	linestart = 4;
-+#else
-+	linestart = 0;
-+#endif
-+
- 	info->line[info->ndev] = line;
--	sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
-+	sprintf(info->node[info->ndev].dev_name, "ttyS%d", line+linestart);
- 	info->node[info->ndev].major = TTY_MAJOR;
--	info->node[info->ndev].minor = 0x40 + line;
-+	info->node[info->ndev].minor = 0x40 + line + linestart;
- 	if (info->ndev > 0)
- 		info->node[info->ndev - 1].next = &info->node[info->ndev];
- 	info->ndev++;
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/pxa_fb_overlay.patch b/packages/kexecboot/linux-kexecboot-2.6.26/pxa_fb_overlay.patch
deleted file mode 100644
index 49c59b3275..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/pxa_fb_overlay.patch
+++ /dev/null
@@ -1,26 +0,0 @@
----
- drivers/video/pxafb.h |    4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-Index: linux-2.6.22/drivers/video/pxafb.h
-===================================================================
---- linux-2.6.22.orig/drivers/video/pxafb.h	2007-09-25 15:44:42.000000000 +0200
-+++ linux-2.6.22/drivers/video/pxafb.h	2007-09-25 15:45:07.000000000 +0200
-@@ -36,7 +36,7 @@
- 	struct fb_bitfield	transp;
- };
- 
--#ifdef CONFIG_PXA27x
-+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- /* PXA Overlay Framebuffer Support */
- struct overlayfb_info
- {
-@@ -142,7 +142,7 @@
- 	wait_queue_head_t	ctrlr_wait;
- 	struct work_struct	task;
- 
--#ifdef CONFIG_PXA27x
-+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- 	/* PXA Overlay Framebuffer Support */
- 	struct overlayfb_info  *overlay1fb;
- 	struct overlayfb_info  *overlay2fb;
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/qemuarm/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/qemuarm/defconfig
deleted file mode 100644
index 6a4502f95b..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/qemuarm/defconfig
+++ /dev/null
@@ -1,1582 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Sun Jan 20 22:28:17 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-CONFIG_ARCH_VERSATILE=y
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Versatile platform type
-#
-CONFIG_ARCH_VERSATILE_PB=y
-# CONFIG_MACH_VERSATILE_AB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-# CONFIG_CPU_V6 is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_ARM_VIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyAMA0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   dyntick=enable debug"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=51200
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TABLET=y
-# CONFIG_TABLET_USB_ACECAD is not set
-# CONFIG_TABLET_USB_AIPTEK is not set
-# CONFIG_TABLET_USB_GTCO is not set
-# CONFIG_TABLET_USB_KBTAB is not set
-CONFIG_TABLET_USB_WACOM=y
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-CONFIG_USB_DSBR=m
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CORGI=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_OHAND_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
-CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL031 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/qemux86/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/qemux86/defconfig
deleted file mode 100644
index 3724f1602b..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/qemux86/defconfig
+++ /dev/null
@@ -1,1993 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Sun Jan 20 18:20:37 2008
-#
-# CONFIG_64BIT is not set
-CONFIG_X86_32=y
-# CONFIG_X86_64 is not set
-CONFIG_X86=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DMI=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME_VSYSCALL is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-# CONFIG_ZONE_DMA32 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_AUDIT_ARCH is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-CONFIG_X86_PC=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_VSMP is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-CONFIG_M686=y
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_GENERIC_CPU is not set
-CONFIG_X86_GENERIC=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
-# CONFIG_HPET_TIMER is not set
-CONFIG_NR_CPUS=8
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_NONFATAL=y
-CONFIG_X86_MCE_P4THERMAL=y
-CONFIG_VM86=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_X86_PAE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MTRR=y
-# CONFIG_EFI is not set
-CONFIG_IRQBALANCE=y
-CONFIG_SECCOMP=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_KEXEC=y
-CONFIG_PHYSICAL_START=0x100000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_SMP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_SMP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_VIDEO is not set
-CONFIG_ACPI_FAN=y
-# CONFIG_ACPI_DOCK is not set
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=y
-# CONFIG_ACPI_SBS is not set
-# CONFIG_APM is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_HT_IRQ=y
-CONFIG_ISA_DMA_API=y
-CONFIG_ISA=y
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SCx200 is not set
-CONFIG_K8_NB=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-# CONFIG_ISAPNP is not set
-# CONFIG_PNPBIOS is not set
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_IBM_ASM is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_CMD640=y
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_RZ1000=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-CONFIG_SCSI_DPT_I2O=m
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SEAGATE is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_LANCE=m
-CONFIG_NET_VENDOR_SMC=y
-CONFIG_WD80x3=m
-CONFIG_ULTRA=m
-CONFIG_SMC9194=m
-# CONFIG_NET_VENDOR_RACAL is not set
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=m
-CONFIG_TULIP_MWI=y
-CONFIG_TULIP_MMIO=y
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_AT1700=m
-CONFIG_DEPCA=m
-CONFIG_HP100=m
-CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
-# CONFIG_EWRK3 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_LP486E is not set
-# CONFIG_ETH16I is not set
-CONFIG_NE2000=y
-# CONFIG_ZNET is not set
-# CONFIG_SEEQ8005 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_PCNET32_NAPI=y
-CONFIG_AMD8111_ETH=m
-CONFIG_AMD8111E_NAPI=y
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_ADAPTEC_STARFIRE_NAPI=y
-CONFIG_AC3200=m
-CONFIG_APRICOT=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_FORCEDETH_NAPI=y
-CONFIG_CS89x0=m
-CONFIG_EEPRO100=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SUNDANCE=m
-CONFIG_SUNDANCE_MMIO=y
-CONFIG_TLAN=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_VIA_RHINE_NAPI=y
-CONFIG_SC92031=m
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_R8169_NAPI=y
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-CONFIG_SKY2=m
-CONFIG_SK98LIN=m
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TABLET=y
-# CONFIG_TABLET_USB_ACECAD is not set
-# CONFIG_TABLET_USB_AIPTEK is not set
-# CONFIG_TABLET_USB_GTCO is not set
-# CONFIG_TABLET_USB_KBTAB is not set
-CONFIG_TABLET_USB_WACOM=y
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-# CONFIG_MWAVE is not set
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_NSC_GPIO is not set
-# CONFIG_CS5535_GPIO is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-CONFIG_SSB=m
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-CONFIG_USB_DSBR=m
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_I810 is not set
-# CONFIG_DRM_I830 is not set
-# CONFIG_DRM_I915 is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-CONFIG_FB_UVESA=m
-# CONFIG_FB_VESA is not set
-# CONFIG_FB_EFI is not set
-# CONFIG_FB_HECUBA is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I810 is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_INTEL is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CORGI=m
-# CONFIG_BACKLIGHT_PROGEAR is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_VIDEO_SELECT=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_OHAND_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# ISA devices
-#
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_DT019X is not set
-# CONFIG_SND_ES968 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_SC6000 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_WAVEFRONT is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
-CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_LGUEST is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-# CONFIG_DELL_RBU is not set
-# CONFIG_DCDBAS is not set
-CONFIG_DMIID=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
-CONFIG_DOUBLEFAULT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_AES_586 is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch b/packages/kexecboot/linux-kexecboot-2.6.26/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
deleted file mode 100644
index b513ba1466..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-
-From: Petr Vandrovec <vandrove@vc.cvut.cz>
-
-Patch below adds support for using different prescaler than 16 for 16c950
-chips.  This is needed for using Fujitsu-Siemens Connect2Air compact-flash
-card, which comes (apparently) with 806kHz clocks, and so you have to
-program prescaler for division by 7, and DLAB to 1, to get 115200Bd.  
-
-To get card properly running you also have to add lines below to
-/etc/pcmcia/serial.opts so kernel knows that base speed is not 115200 but
-50400 (50400 * 16 = 806400; 806400 / 7 = 115200).  As I've found no code
-specifying baud_rate in serial_cs, I assume that specifying it in
-serial.opts is right way to do this type of things.
-
-Patch also fixes problem that for UPF_MAGIC_MULTIPLIER maximum possible
-baud rate passed to uart code was uartclk / 16 while correct value for
-these devices (and for 16c950) is uartclk / 4.
-
-Patch also fixes problem that for UPF_MAGIC_MULTIPLIER devices with
-baud_rate 19200 or 9600 spd_cust did not work correctly.  Not that such
-devices exist, but we should not ignore spd_cust, user probably knows why
-he asked for spd_cust.
-
-serial.opts:
-
-case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in
-'0279,950b-2-GPRS Modem---')
-    SERIAL_OPTS="baud_base 50400"
-    ;;
-esac
-
-Cc: David Woodhouse <dwmw2@infradead.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
----
-
- drivers/serial/8250.c |   82 +++++++++++++++++++++++++++++++++++++++-----------
- 1 file changed, 64 insertions(+), 18 deletions(-)
-
-Index: linux-2.6.21/drivers/serial/8250.c
-===================================================================
---- linux-2.6.21.orig/drivers/serial/8250.c	2007-07-01 16:59:52.000000000 +0100
-+++ linux-2.6.21/drivers/serial/8250.c	2007-07-01 17:01:21.000000000 +0100
-@@ -1964,24 +1964,58 @@ static void serial8250_shutdown(struct u
- 		serial_unlink_irq_chain(up);
- }
- 
--static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
-+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud,
-+					   unsigned int *prescaler)
- {
--	unsigned int quot;
--
--	/*
--	 * Handle magic divisors for baud rates above baud_base on
--	 * SMSC SuperIO chips.
-+        /*
-+	 * Use special handling only if user did not supply its own divider.
-+	 * spd_cust is defined in terms of baud_base, so always use default
-+	 * prescaler when spd_cust is requested.
- 	 */
--	if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
--	    baud == (port->uartclk/4))
--		quot = 0x8001;
--	else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
--		 baud == (port->uartclk/8))
--		quot = 0x8002;
--	else
--		quot = uart_get_divisor(port, baud);
- 
--	return quot;
-+	*prescaler = 16;
-+        if (baud != 38400 || (port->flags & UPF_SPD_MASK) != UPF_SPD_CUST) {
-+		unsigned int quot = port->uartclk / baud;
-+
-+		/*
-+		 * Handle magic divisors for baud rates above baud_base on
-+		 * SMSC SuperIO chips.
-+		 */
-+		if (port->flags & UPF_MAGIC_MULTIPLIER) {
-+			if (quot == 4) {
-+				return 0x8001;
-+			} else if (quot == 8) {
-+				return 0x8002;
-+			}
-+		}
-+		if (port->type == PORT_16C950) {
-+			/*
-+			 * This computes TCR value (4 to 16), not CPR value (which can
-+			 * be between 1.000 and 31.875) - chip I have uses XTAL of
-+			 * 806400Hz, and so a division by 7 is required to get 115200Bd.
-+			 * I'm leaving CPR disabled for now, until someone will
-+			 * hit even more exotic XTAL (it is needed to get 500kbps
-+			 * or 1000kbps from 18.432MHz XTAL, but I have no device
-+			 * which would benefit from doing that).
-+			 *
-+			 * If we can use divide by 16, use it.  Otherwise look for
-+			 * better prescaler, from 15 to 4.  If quotient cannot
-+			 * be divided by any integer value between 4 and 15, use 4.
-+			 */
-+			if (quot & 0x0F) {
-+				unsigned int div;
-+
-+				for (div = 15; div > 4; div--) {
-+					if (quot % div == 0) {
-+						break;
-+					}
-+				}
-+				*prescaler = div;
-+				return quot / div;
-+			}
-+		}
-+	}
-+	return uart_get_divisor(port, baud);
- }
- 
- static void
-@@ -1991,7 +2025,7 @@ serial8250_set_termios(struct uart_port 
- 	struct uart_8250_port *up = (struct uart_8250_port *)port;
- 	unsigned char cval, fcr = 0;
- 	unsigned long flags;
--	unsigned int baud, quot;
-+	unsigned int baud, quot, prescaler;
- 
- 	switch (termios->c_cflag & CSIZE) {
- 	case CS5:
-@@ -2023,8 +2057,13 @@ serial8250_set_termios(struct uart_port 
- 	/*
- 	 * Ask the core to calculate the divisor for us.
- 	 */
--	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
--	quot = serial8250_get_divisor(port, baud);
-+	if (port->type == PORT_16C950 || (port->flags & UPF_MAGIC_MULTIPLIER)) {
-+		baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
-+	} else {
-+		baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+	}
-+	quot = serial8250_get_divisor(port, baud, &prescaler);
-+
- 
- 	/*
- 	 * Oxford Semi 952 rev B workaround
-@@ -2139,6 +2178,13 @@ serial8250_set_termios(struct uart_port 
- 	serial_dl_write(up, quot);
- 
- 	/*
-+	 * Program prescaler for 16C950 chips.
-+	 */
-+	if (up->port.type == PORT_16C950) {
-+		serial_icr_write(up, UART_TCR, prescaler == 16 ? 0 : prescaler);
-+	}
-+
-+	/*
- 	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
- 	 * is written without DLAB set, this mode will be disabled.
- 	 */
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/sharpsl-rc-r1.patch b/packages/kexecboot/linux-kexecboot-2.6.26/sharpsl-rc-r1.patch
deleted file mode 100644
index a9d939d076..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/sharpsl-rc-r1.patch
+++ /dev/null
@@ -1,555 +0,0 @@
-This patch adds support for Sharp CE-RH2 on Spitz.
-
-It is not clean enough to be upstreamed:
-- It is a bit syslog-noisy.
-- Does not support other Zaurus models.
-- Maybe split to more parts:
-  * MAX1111 driver
-  * linear input device
-  * virtual keyboard on top of linear input device
-
-Index: linux-2.6.26/arch/arm/mach-pxa/spitz.c
-===================================================================
---- linux-2.6.26.orig/arch/arm/mach-pxa/spitz.c	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/arch/arm/mach-pxa/spitz.c	2008-07-15 10:11:15.000000000 +0000
-@@ -261,6 +261,13 @@
- 	.id		= -1,
- };
- 
-+/*
-+ * Spitz Remote Control Device
-+ */
-+static struct platform_device sharpsl_rc_device = {
-+	.name		= "sharpsl-remote-control",
-+	.id		= -1,
-+};
- 
- /*
-  * Spitz LEDs
-@@ -522,6 +529,7 @@
- 	&spitzscoop_device,
- 	&spitzssp_device,
- 	&spitzkbd_device,
-+	&sharpsl_rc_device,
- 	&spitzts_device,
- 	&spitzbl_device,
- 	&spitzled_device,
-Index: linux-2.6.26/drivers/input/keyboard/Kconfig
-===================================================================
---- linux-2.6.26.orig/drivers/input/keyboard/Kconfig	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/drivers/input/keyboard/Kconfig	2008-07-15 10:11:15.000000000 +0000
-@@ -175,6 +175,17 @@
- 
- 	  Say Y only if you know, what you are doing!
- 
-+config SHARPSL_RC
-+	tristate "Sharp SL-Cxx00 Remote Control"
-+	depends on PXA_SHARPSL
-+	default y
-+	help
-+	  Say Y here to enable the remote on the Sharp Zaurus SL-Cxx00,
-+	  SL-C1000, SL-C3000 and Sl-C3100 series of PDAs.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called sharpsl_rc.
-+
- config KEYBOARD_AMIGA
- 	tristate "Amiga keyboard"
- 	depends on AMIGA
-Index: linux-2.6.26/drivers/input/keyboard/Makefile
-===================================================================
---- linux-2.6.26.orig/drivers/input/keyboard/Makefile	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/drivers/input/keyboard/Makefile	2008-07-15 10:11:15.000000000 +0000
-@@ -26,4 +26,5 @@
- obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
- obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
- obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
-+obj-$(CONFIG_SHARPSL_RC)		+= sharpsl_rc.o
- obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
-Index: linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c	2008-07-15 10:11:15.000000000 +0000
-@@ -0,0 +1,319 @@
-+/*
-+ *  Keyboard driver for Sharp Clamshell Models (SL-Cxx00)
-+ *
-+ *  Copyright (c) 2004-2005 Richard Purdie
-+ *
-+ *  Based on corgikbd.c and Sharp's RC driver
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#define DEBUG 1
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/jiffies.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/arch/spitz.h>
-+#include <asm/arch/akita.h>
-+#include <asm/arch/corgi.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxa2xx-gpio.h>
-+#include <asm/hardware/scoop.h>
-+#include <asm/arch/sharpsl.h>
-+#include <asm/hardware/sharpsl_pm.h>
-+
-+#define DPRINTK(fmt, args...) dev_dbg(data->dev, fmt "\n", ##args)
-+
-+struct remote_control_key {
-+	unsigned char min;
-+	unsigned char max;
-+	unsigned char key;
-+};
-+
-+static struct remote_control_key remote_keys_spitz[] = {
-+	/* CE-RH2 values */
-+	{ 25, 35, KEY_STOPCD},
-+	{ 55, 65, KEY_PLAYPAUSE},
-+	{ 85, 95, KEY_NEXTSONG},
-+	{ 115, 125, KEY_VOLUMEUP},
-+	{ 145, 155, KEY_PREVIOUSSONG},
-+	{ 180, 190, KEY_MUTE},
-+	{ 215, 225, KEY_VOLUMEDOWN},
-+};
-+static struct remote_control_key remote_keys_corgi[] = {
-+	/* CE-RH1 values */
-+	{ 27, 35, KEY_STOPCD},
-+	{ 7, 13, KEY_PLAYPAUSE},
-+	{ 77, 93, KEY_NEXTSONG},
-+	{ 115, 132, KEY_VOLUMEUP},
-+	{ 46, 58, KEY_PREVIOUSSONG},
-+	{ 170, 186, KEY_VOLUMEDOWN},
-+};
-+
-+#define RELEASE_HI      230
-+#define MAX_EARPHONE    6
-+#define RC_POLL_MS      10
-+#define RC_FINISH_MS    500
-+#define WAIT_STATE      3
-+#define NOISE_THRESHOLD 100
-+
-+struct sharpsl_rc {
-+	struct input_dev *input;
-+	struct device *dev;
-+
-+	spinlock_t lock;
-+	struct timer_list rctimer;
-+	struct timer_list rctimer_finish;
-+
-+	unsigned int handling_press;
-+	unsigned int noise;
-+	unsigned int state;
-+	unsigned int last_key;
-+};
-+
-+static int get_remocon_raw(void)
-+{
-+	int i, val;
-+	struct remote_control_key *remote_keys;
-+
-+	if (machine_is_borzoi() || machine_is_spitz() || machine_is_akita())
-+		remote_keys = remote_keys_spitz;
-+	else
-+		remote_keys = remote_keys_corgi;
-+
-+	val = sharpsl_pm_pxa_read_max1111(MAX1111_REMCOM);
-+	for (i = 0; i < (machine_is_borzoi() || machine_is_spitz() || machine_is_akita() ?
-+			 ARRAY_SIZE(remote_keys_spitz) : ARRAY_SIZE(remote_keys_corgi));
-+			 ++i) {
-+		if (val >= remote_keys[i].min
-+			&& val <= remote_keys[i].max) {
-+			printk("get_remocon_raw: VAL=%i, KEY=%i\n", val, remote_keys[i].key);
-+			return remote_keys[i].key;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static irqreturn_t sharpsl_rc_interrupt(int irq, void *dev_id)
-+{
-+	struct sharpsl_rc *data = dev_id;
-+	DPRINTK("sharpsl_rc_interrupt %d\n", irq);
-+	if (!data->handling_press) {
-+		DPRINTK("handling interrupt");
-+		data->handling_press = 1;
-+		data->noise = 0;
-+		data->state = 0;
-+		data->last_key = 0;
-+
-+		if (machine_is_borzoi() || machine_is_spitz())
-+			reset_scoop_gpio(platform_scoop_config->devs[1].dev, SPITZ_SCP2_AKIN_PULLUP);
-+		else if (machine_is_akita())
-+            		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_AKIN_PULLUP);
-+		else
-+			reset_scoop_gpio(platform_scoop_config->devs[0].dev, CORGI_SCP_AKIN_PULLUP);
-+		mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS));
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static void sharpsl_rc_timer_callback(unsigned long dataPtr)
-+{
-+	struct sharpsl_rc *data = (struct sharpsl_rc *) dataPtr;
-+	int timer = 1;
-+	int key = get_remocon_raw();
-+	DPRINTK("timer callback, key: %d", key);
-+
-+	//wait for value to stabilize
-+	if (data->state < WAIT_STATE) {
-+		if (data->last_key != key) {
-+			++data->noise;
-+			if (data->noise > NOISE_THRESHOLD) {
-+				DPRINTK("too much noise, bailing");
-+				timer = 0;
-+			}
-+			data->state = 0;
-+		} else {
-+			++data->state;
-+		}
-+		data->last_key = key;
-+
-+	//stable value, send event
-+	} else if (data->state == WAIT_STATE) {
-+		data->noise = 0;
-+		//non-key returned, skip the rest of the states and bail now
-+		if (data->last_key == 0) {
-+			DPRINTK("non-key detected %d, noise: %d", data->last_key, data->noise);
-+			timer = 0;
-+		//send button press
-+		} else {
-+			DPRINTK("key press detected %d, noise %d", data->last_key, data->noise);
-+			input_report_key(data->input, data->last_key, 1);
-+		}
-+		++data->state;
-+
-+	//wait until key is released
-+	} else if (data->state < WAIT_STATE * 2) {
-+		if (key == data->last_key
-+			&& data->noise < NOISE_THRESHOLD) {
-+			data->state = WAIT_STATE + 1;
-+			++data->noise;
-+		} else {
-+			++data->state;
-+		}
-+	//key is released, send event
-+	} else {
-+		//send button release
-+		DPRINTK("release key %d", data->last_key);
-+		input_report_key(data->input, data->last_key, 0);
-+		timer = 0;
-+	}
-+	if (timer) {
-+		mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS));
-+	} else {
-+		if (machine_is_borzoi() || machine_is_spitz())
-+			set_scoop_gpio(platform_scoop_config->devs[1].dev, SPITZ_SCP2_AKIN_PULLUP);
-+		else if (machine_is_akita())
-+            		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_AKIN_PULLUP);
-+		else
-+			set_scoop_gpio(platform_scoop_config->devs[0].dev, CORGI_SCP_AKIN_PULLUP);
-+		data->handling_press = 0;
-+	}
-+}
-+
-+static int __init sharpsl_rc_probe(struct platform_device *pdev)
-+{
-+	struct sharpsl_rc *sharpsl_rc;
-+	struct input_dev *input_dev;
-+	int i, ret;
-+	struct remote_control_key *remote_keys;
-+
-+	dev_dbg(&pdev->dev, "sharpsl_rc_probe\n");
-+
-+	sharpsl_rc = kzalloc(sizeof(struct sharpsl_rc), GFP_KERNEL);
-+	input_dev = input_allocate_device();
-+	if (!sharpsl_rc || !input_dev) {
-+		kfree(sharpsl_rc);
-+		input_free_device(input_dev);
-+		return -ENOMEM;
-+	}
-+
-+	platform_set_drvdata(pdev, sharpsl_rc);
-+
-+	sharpsl_rc->dev = &pdev->dev;
-+	sharpsl_rc->input = input_dev;
-+	spin_lock_init(&sharpsl_rc->lock);
-+
-+	/* Init Remote Control Timer */
-+	init_timer(&sharpsl_rc->rctimer);
-+	sharpsl_rc->rctimer.function = sharpsl_rc_timer_callback;
-+	sharpsl_rc->rctimer.data = (unsigned long) sharpsl_rc;
-+
-+	input_dev->name = "Sharp Remote Control CE-RHX";
-+	input_dev->phys = "sharpsl_rc/input0";
-+	input_dev->id.bustype = BUS_HOST;
-+	input_dev->id.vendor = 0x0001;
-+	input_dev->id.product = 0x0001;
-+	input_dev->id.version = 0x0100;
-+	input_dev->dev.parent = &pdev->dev;
-+
-+	input_dev->evbit[0] = BIT(EV_KEY);
-+
-+	if (machine_is_borzoi() || machine_is_spitz() || machine_is_akita())
-+		remote_keys = remote_keys_spitz;
-+	else
-+		remote_keys = remote_keys_corgi;
-+	for (i = 0; i < (machine_is_borzoi() || machine_is_spitz() || machine_is_akita() ?
-+			 ARRAY_SIZE(remote_keys_spitz) : ARRAY_SIZE(remote_keys_corgi));
-+			 ++i)
-+		set_bit(remote_keys[i].key, input_dev->keybit);
-+
-+	ret = input_register_device(sharpsl_rc->input);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "Failed to register Sharp Remote input device\n");
-+		kfree(sharpsl_rc);
-+		input_free_device(input_dev);
-+		return ret;
-+	}
-+
-+	if (machine_is_borzoi() || machine_is_spitz() || machine_is_akita()) {
-+		pxa_gpio_mode(SPITZ_GPIO_AK_INT | GPIO_IN);
-+		ret = request_irq(SPITZ_IRQ_GPIO_AK_INT,
-+				  sharpsl_rc_interrupt,
-+				  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
-+				  "sharpsl_rc",
-+				  sharpsl_rc);
-+	} else {
-+		pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN);
-+		ret = request_irq(CORGI_IRQ_GPIO_AK_INT,
-+				  sharpsl_rc_interrupt,
-+				  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
-+				  "sharpsl_rc",
-+				  sharpsl_rc);
-+	}
-+	if (ret < 0) {
-+		dev_dbg(&pdev->dev, "Can't get IRQ: %d!\n", i);
-+		kfree(sharpsl_rc);
-+		input_free_device(input_dev);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int sharpsl_rc_remove(struct platform_device *pdev)
-+{
-+	struct sharpsl_rc *sharpsl_rc = platform_get_drvdata(pdev);
-+
-+	dev_dbg(&pdev->dev, "sharpsl_rc_remove\n");
-+
-+	if (machine_is_borzoi() || machine_is_spitz() || machine_is_akita())
-+		free_irq(SPITZ_IRQ_GPIO_AK_INT, sharpsl_rc);
-+	else
-+		free_irq(CORGI_IRQ_GPIO_AK_INT, sharpsl_rc);
-+	del_timer_sync(&sharpsl_rc->rctimer);
-+	input_unregister_device(sharpsl_rc->input);
-+	kfree(sharpsl_rc);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver sharpsl_rc_driver = {
-+	.probe		= sharpsl_rc_probe,
-+	.remove		= sharpsl_rc_remove,
-+	.suspend	= NULL,
-+	.resume		= NULL,
-+	.driver		= {
-+		.name	= "sharpsl-remote-control",
-+	},
-+};
-+
-+static int __devinit sharpsl_rc_init(void)
-+{
-+	printk("sharpsl_rc_init\n");
-+	return platform_driver_register(&sharpsl_rc_driver);
-+}
-+
-+static void __exit sharpsl_rc_exit(void)
-+{
-+	printk("sharpsl_rc_exit\n");
-+	platform_driver_unregister(&sharpsl_rc_driver);
-+}
-+
-+module_init(sharpsl_rc_init);
-+module_exit(sharpsl_rc_exit);
-+
-+MODULE_AUTHOR("Justin Patrin <papercrane@reversefold.com>");
-+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
-+MODULE_DESCRIPTION("SharpSL Remote Control Driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.26/drivers/input/keyboard/spitzkbd.c
-===================================================================
---- linux-2.6.26.orig/drivers/input/keyboard/spitzkbd.c	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/drivers/input/keyboard/spitzkbd.c	2008-07-15 10:11:15.000000000 +0000
-@@ -19,6 +19,7 @@
- #include <linux/jiffies.h>
- #include <linux/module.h>
- #include <linux/slab.h>
-+#include <linux/kmod.h>
- 
- #include <asm/arch/spitz.h>
- #include <asm/arch/hardware.h>
-@@ -280,13 +281,21 @@
- static int sharpsl_hinge_state;
- static int hinge_count;
- 
-+void spitzkbd_handle_sharpsl_rc(void *arg) {
-+	request_module("sharpsl_rc");
-+}
-+
-+DECLARE_WORK(spitzkbd_work, spitzkbd_handle_sharpsl_rc);
-+
- static void spitzkbd_hinge_timer(unsigned long data)
- {
- 	struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
- 	unsigned long state;
- 	unsigned long flags;
-+	unsigned int headphone, remote;
- 
- 	state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB));
-+	state |= (GPLR(SPITZ_GPIO_HP_IN) & GPIO_bit(SPITZ_GPIO_HP_IN));
- 	state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT));
- 	if (state != sharpsl_hinge_state) {
- 		hinge_count = 0;
-@@ -300,9 +309,18 @@
- 
- 		input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
- 		input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
--		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
-+
-+		headphone = ((GPLR(SPITZ_GPIO_HP_IN) & GPIO_bit(SPITZ_GPIO_HP_IN)) != 0);
-+		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, headphone);
-+
-+		remote = headphone && ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) == 0);
-+		input_report_switch(spitzkbd_data->input, SW_REMOTE_INSERT, remote);
- 		input_sync(spitzkbd_data->input);
- 
-+		if (remote) {
-+			schedule_work(&spitzkbd_work);
-+		}
-+
- 		spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
- 	} else {
- 		mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
-@@ -396,6 +414,7 @@
- 	set_bit(SW_LID, input_dev->swbit);
- 	set_bit(SW_TABLET_MODE, input_dev->swbit);
- 	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
-+	set_bit(SW_REMOTE_INSERT, input_dev->swbit);
- 
- 	err = input_register_device(input_dev);
- 	if (err)
-@@ -433,9 +452,12 @@
- 	request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
- 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- 		    "Spitzkbd SWB", spitzkbd);
--	request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
-+	request_irq(SPITZ_IRQ_GPIO_HP_IN, spitzkbd_hinge_isr,
- 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- 		    "Spitzkbd HP", spitzkbd);
-+  	request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
-+ 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
-+            "Spitzkbd HP Type", spitzkbd);
- 
- 	return 0;
- 
-@@ -456,6 +478,7 @@
- 	free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
- 	free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
- 	free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
-+	free_irq(SPITZ_IRQ_GPIO_HP_IN, spitzkbd);
- 	free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd);
- 
- 	del_timer_sync(&spitzkbd->htimer);
-Index: linux-2.6.26/arch/arm/mach-pxa/sharpsl.h
-===================================================================
---- linux-2.6.26.orig/arch/arm/mach-pxa/sharpsl.h	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/arch/arm/mach-pxa/sharpsl.h	2008-07-15 10:11:15.000000000 +0000
-@@ -37,15 +37,10 @@
-  */
- #define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
- 
--/* MAX1111 Channel Definitions */
--#define MAX1111_BATT_VOLT   4u
--#define MAX1111_BATT_TEMP   2u
--#define MAX1111_ACIN_VOLT   6u
--
- extern struct battery_thresh spitz_battery_levels_acin[];
- extern struct battery_thresh spitz_battery_levels_noac[];
- void sharpsl_pm_pxa_init(void);
- void sharpsl_pm_pxa_remove(void);
--int sharpsl_pm_pxa_read_max1111(int channel);
-+
- 
- 
-Index: linux-2.6.26/arch/arm/mach-pxa/sharpsl_pm.c
-===================================================================
---- linux-2.6.26.orig/arch/arm/mach-pxa/sharpsl_pm.c	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/arch/arm/mach-pxa/sharpsl_pm.c	2008-07-15 10:11:15.000000000 +0000
-@@ -136,6 +136,8 @@
- 			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
- }
- 
-+EXPORT_SYMBOL(sharpsl_pm_pxa_read_max1111);
-+
- void sharpsl_pm_pxa_init(void)
- {
- 	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
-Index: linux-2.6.26/include/asm-arm/hardware/sharpsl_pm.h
-===================================================================
---- linux-2.6.26.orig/include/asm-arm/hardware/sharpsl_pm.h	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/include/asm-arm/hardware/sharpsl_pm.h	2008-07-15 10:11:15.000000000 +0000
-@@ -104,3 +104,10 @@
- irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
- irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
- 
-+/* MAX1111 Channel Definitions */
-+#define MAX1111_REMCOM      0u
-+#define MAX1111_BATT_VOLT   4u
-+#define MAX1111_BATT_TEMP   2u
-+#define MAX1111_ACIN_VOLT   6u
-+
-+int sharpsl_pm_pxa_read_max1111(int channel);
-Index: linux-2.6.26/include/linux/input.h
-===================================================================
---- linux-2.6.26.orig/include/linux/input.h	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/include/linux/input.h	2008-07-15 10:13:04.000000000 +0000
-@@ -640,6 +640,7 @@
- #define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
- 					 set = radio enabled */
- #define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
-+#define SW_REMOTE_INSERT	0x04  /* set = remote */
- #define SW_MAX			0x0f
- #define SW_CNT			(SW_MAX+1)
- 
-Index: linux-2.6.26/arch/arm/mach-pxa/spitz_pm.c
-===================================================================
---- linux-2.6.26.orig/arch/arm/mach-pxa/spitz_pm.c	2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/arch/arm/mach-pxa/spitz_pm.c	2008-07-15 10:11:15.000000000 +0000
-@@ -160,6 +160,13 @@
- 	if (resume_on_alarm && (PEDR & PWER_RTC))
- 		is_resume |= PWER_RTC;
- 
-+	printk("wakeup: PEDR: %x, PKSR: %x, HP_IN: %x, AK_INT: %x\n", PEDR, PKSR, GPIO_bit(SPITZ_GPIO_HP_IN), GPIO_bit(SPITZ_GPIO_AK_INT));
-+
-+	//remote/headphone interrupt, wakeup
-+	if (PEDR == 0 && (PKSR & 0xc0d01) != 0) {
-+		is_resume |= PWER_RTC;
-+	}
-+
- 	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
- 	return is_resume;
- }
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/spitz/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/spitz/defconfig
deleted file mode 100644
index 2d34ad0225..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/spitz/defconfig
+++ /dev/null
@@ -1,1011 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Mon Feb  2 00:49:55 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_PXA_SHARPSL_25x is not set
-CONFIG_PXA_SHARPSL_27x=y
-CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
-CONFIG_MACH_BORZOI=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_KEYS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_SHARPSL_RC=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_SPITZ=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/spitz_h_rewrite.patch b/packages/kexecboot/linux-kexecboot-2.6.26/spitz_h_rewrite.patch
deleted file mode 100644
index 3dcf4ed8af..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/spitz_h_rewrite.patch
+++ /dev/null
@@ -1,497 +0,0 @@
-http://www.uwsg.indiana.edu/hypermail/linux/kernel/0802.1/3541.html
-
-Here is a rewrite of spitz.h, which includes comments documenting
-function of particular GPIO pins.
-
-spitz_h_rewrite.patch provides:
-- no changes in compiled code
-- partial spitz.h rewrite:
-  * organized by function
-  * describes complete GPIO pinout
-  * comments added
-  * removed defines cloning pxa-regs.h
-- prefer generic pxa-regs.h GPIO if available
-- use GPIO names instead of numbers
-
-Thanks to Trisoft for providing needed information.
-
-Index: linux-2.6.26-rc4/arch/arm/mach-pxa/spitz_pm.c
-===================================================================
---- linux-2.6.26-rc4.orig/arch/arm/mach-pxa/spitz_pm.c	2008-06-02 00:13:53.000000000 +0100
-+++ linux-2.6.26-rc4/arch/arm/mach-pxa/spitz_pm.c	2008-06-02 00:13:53.000000000 +0100
-@@ -111,9 +111,9 @@
- 	pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH);
- 
- 	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
--	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
--	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
--	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-+	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST);
-+	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST) | PWER_RTC;
-+	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST);
- 	PKSR = 0xffffffff; // clear
- 
- 	/* nRESET_OUT Disable */
-@@ -126,7 +126,7 @@
- static void spitz_postsuspend(void)
- {
- 	pxa_gpio_mode(GPIO18_RDY_MD);
--	pxa_gpio_mode(10 | GPIO_IN);
-+	pxa_gpio_mode(SPITZ_GPIO_NC_10 | GPIO_IN);
- }
- 
- static int spitz_should_wakeup(unsigned int resume_on_alarm)
-Index: linux-2.6.26-rc4/drivers/video/pxafb.c
-===================================================================
---- linux-2.6.26-rc4.orig/drivers/video/pxafb.c	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/drivers/video/pxafb.c	2008-06-02 00:15:22.000000000 +0100
-@@ -966,7 +966,7 @@
- 		return;
- 	}
- 
--	for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
-+	for (gpio = GPIO58_LDD_0; ldd_bits; gpio++, ldd_bits--)
- 		pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
- 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
- 	pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/akita.h
-===================================================================
---- linux-2.6.26-rc4.orig/include/asm-arm/arch-pxa/akita.h	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/akita.h	2008-06-02 00:13:53.000000000 +0100
-@@ -12,11 +12,11 @@
- /* Akita IO Expander GPIOs */
- 
- #define AKITA_IOEXP_RESERVED_7      (1 << 7)
--#define AKITA_IOEXP_IR_ON           (1 << 6)
--#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
--#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
--#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
--#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
-+#define AKITA_IOEXP_IR_ON           (1 << 6)	/* IrDA On */
-+#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)	/* Pull-Up for Remote */
-+#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)	/* Backlight Control */
-+#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)	/* Backlight On */
-+#define AKITA_IOEXP_MIC_BIAS        (1 << 2)	/* Mic Bias On */
- #define AKITA_IOEXP_RESERVED_1      (1 << 1)
- #define AKITA_IOEXP_RESERVED_0      (1 << 0)
- 
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/spitz.h
-===================================================================
---- linux-2.6.26-rc4.orig/include/asm-arm/arch-pxa/spitz.h	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/spitz.h	2008-06-02 00:13:53.000000000 +0100
-@@ -1,8 +1,9 @@
- /*
-- * Hardware specific definitions for SL-Cx000 series of PDAs
-+ * Hardware specific definitions for SL-Cxx00 series of PDAs
-  *
-  * Copyright (c) 2005 Alexander Wykes
-  * Copyright (c) 2005 Richard Purdie
-+ * Copyright (c) 2008 Stanislav Brabec
-  *
-  * Based on Sharp's 2.4 kernel patches
-  *
-@@ -13,140 +14,257 @@
-  */
- #ifndef __ASM_ARCH_SPITZ_H
- #define __ASM_ARCH_SPITZ_H  1
--#endif
- 
--#include <linux/fb.h>
-+#include <asm-arm/arch-pxa/irqs.h>
-+#include <linux/platform_device.h>
- 
- /* Spitz/Akita GPIOs */
- 
--#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
--#define SPITZ_GPIO_RESET           (1)
--#define SPITZ_GPIO_nSD_DETECT      (9)
--#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
--#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
--#define SPITZ_GPIO_ADS7846_CS      (14)
--#define SPITZ_GPIO_SYNC            (16)
--#define SPITZ_GPIO_MAX1111_CS      (20)
--#define SPITZ_GPIO_FATAL_BAT       (21)
--#define SPITZ_GPIO_HSYNC           (22)
--#define SPITZ_GPIO_nSD_CLK         (32)
--#define SPITZ_GPIO_USB_DEVICE      (35)
--#define SPITZ_GPIO_USB_HOST        (37)
--#define SPITZ_GPIO_USB_CONNECT     (41)
--#define SPITZ_GPIO_LCDCON_CS       (53)
--#define SPITZ_GPIO_nPCE            (54)
--#define SPITZ_GPIO_nSD_WP          (81)
--#define SPITZ_GPIO_ON_RESET        (89)
--#define SPITZ_GPIO_BAT_COVER       (90)
--#define SPITZ_GPIO_CF_CD           (94)
--#define SPITZ_GPIO_ON_KEY          (95)
--#define SPITZ_GPIO_SWA             (97)
--#define SPITZ_GPIO_SWB             (96)
--#define SPITZ_GPIO_CHRG_FULL       (101)
--#define SPITZ_GPIO_CO              (101)
--#define SPITZ_GPIO_CF_IRQ          (105)
--#define SPITZ_GPIO_AC_IN           (115)
--#define SPITZ_GPIO_HP_IN           (116)
-+/* This list refers to all GPIO pins either in defines or in comments.
-+ *
-+ * GPIO pins not listed:
-+ * GPIO2	SYS_EN: 		System Power Enable
-+ * GPIO5-GPIO8	PWR_CAP0-PWR_CAP3:	sleep DC-DC converter power capacitors
-+ * GPIO40	not connected
-+ */
- 
--/* Spitz Only GPIOs */
- 
--#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
--#define SPITZ_GPIO_CF2_CD          (93)
-+/* Spitz/Akita System GPIO */
-+
-+#define SPITZ_GPIO_KEY_INT	   (0)	/* Key Interrupt */
-+#define SPITZ_GPIO_SYNC		  (16)	/* IOPORT Wake Up (input) */
-+#define SPITZ_GPIO_NAND_CS	  (79)	/* NAND Flash Chip Select */
-+#define SPITZ_GPIO_NC_10	  (10)	/* Not Connected (but used in kernel) */
-+/* This GPIO pin is connected:
-+ * GPIO1_RST
-+ */
- 
- 
-+/* Compact Flash Interface */
-+
-+/* Spitz/Akita Compact Flash Interface */
-+#define SPITZ_GPIO_CF_CD	  (94)	/* CF IRQ */
-+#define SPITZ_GPIO_CF_IRQ	 (105)	/* CF Ready */
-+/* These GPIO pins are connected:
-+ * GPIO48_nPOE
-+ * GPIO49_nPWE
-+ * GPIO50_nPIOR
-+ * GPIO51_nPIOW
-+ * GPIO54_nPCE_2
-+ * GPIO55_nPREG
-+ * GPIO56_nPWAIT
-+ * GPIO57_nIOIS16
-+ * GPIO80_nCS_4
-+ * GPIO85_nPCE_1
-+ * GPIO104_pSKTSEL
-+ */
-+
-+/* Spitz only Compact Flash Interface */
-+#define SPITZ_GPIO_CF2_CD	  (93)	/* CF slot1 IRQ */
-+#define SPITZ_GPIO_CF2_IRQ	 (106)	/* CF slot1 Ready */
-+/* This GPIO pin is connected:
-+ * GPIO78_nCS_2
-+ */
-+
-+
-+/* Spitz/Akita Battery, Power and Service Connector */
-+
-+#define SPITZ_GPIO_FATAL_BAT	  (21)	/* Fatal Battery */
-+#define SPITZ_GPIO_BAT_COVER	  (90)	/* Battery Cover switch */
-+#define SPITZ_GPIO_BAT_COVER2	  (15)	/* Battery Cover switch, parallel pin */
-+#define SPITZ_GPIO_CHRG_FULL	 (101)	/* Battery Full */
-+#define SPITZ_GPIO_AC_IN	 (115)	/* External Power Supply is active */
-+#define SPITZ_GPIO_ON_RESET	  (89)	/* Software Reset */
-+#define SPITZ_GPIO_SERVICE0	  (83)	/* Service Connector */
-+#define SPITZ_GPIO_SERVICE1	  (84)	/* Service Connector */
-+/* This GPIO pin is connected:
-+ * GPIO18_RDY
-+ */
-+
-+
-+/* Spitz/Akita Display Controller */
-+
-+#define SPITZ_GPIO_HSYNC	  (22)	/* Line Sync Feedback */
-+/* These GPIO pins are connected:
-+ * GPIO58_LDD_0-GPIO58_LDD_15
-+ * GPIO74_LCD_FCLK
-+ * GPIO75_LCD_LCLK
-+ * GPIO76_LCD_PCLK
-+ * GPIO77_LCD_ACBIAS
-+ */
-+
-+
-+/* Spitz/Akita SSP/SPI Bus and Devices */
-+
-+#define SPITZ_GPIO_SSP_CLK	  (19)	/* SSP bus Clock */
-+#define SPITZ_GPIO_SSP_RXD	  (86)	/* SSP bus RxD */
-+#define SPITZ_GPIO_SSP_TXD	  (87)	/* SSP bus TxD */
-+#define SPITZ_GPIO_TP_INT	  (11)	/* Touch Panel IRQ */
-+#define SPITZ_GPIO_ADS7846_CS	  (14)	/* Touch Panel Controller Chip Select */
-+#define SPITZ_GPIO_MAX1111_CS	  (20)	/* Multi Channel ADC Chip Select */
-+#define SPITZ_GPIO_LCDCON_CS	  (53)	/* LCD Controller Chip Select */
-+
-+
-+/* Spitz/Akita Supplementary USB OTG Pins */
-+
-+#define SPITZ_GPIO_USB_DEVICE	  (35)	/* USB Client power is present */
-+#define SPITZ_GPIO_USB_HOST	  (37)	/* USB OTG 5V Host power supply control */
-+#define SPITZ_GPIO_USB_CONNECT	  (41)	/* USB Host Cable is connected */
-+
-+
-+/* Spitz/Akita Audio */
-+
-+#define SPITZ_GPIO_HP_IN	 (116)	/* CPU Headphone detect */
-+#define SPITZ_GPIO_AK_INT	  (13)	/* Remote Control detect */
-+/* These GPIO AC97 pins are connected:
-+ * GPIO28_BITCLK
-+ * GPIO29_SDATA_IN
-+ * GPIO30_SDATA_OUT
-+ * GPIO31_SYNC
-+ * GPIO113_AC97_RESET_N
-+ */
-+
-+
-+/* Spitz/Akita SD Slot */
-+
-+#define SPITZ_GPIO_nSD_DETECT	  (9)	/* SD Card Presence */
-+#define SPITZ_GPIO_nSD_WP	 (81)	/* SD Write Protection */
-+/* These GPIO pins are connected:
-+ * GPIO32_MMCCLK
-+ * GPIO92_MMCDAT0
-+ * GPIO109_MMCDAT1
-+ * GPIO110_MMCDAT2
-+ * GPIO111_MMCDAT3
-+ * GPIO112_MMCCMD
-+ */
-+
-+/* Spitz/Akita I2C bus */
-+#define SPITZ_GPIO_SCL		 (117)	/* I2C SCL */
-+#define SPITZ_GPIO_SDA		 (118)	/* I2C SDA */
-+#define SPITZ_GPIO_PWR_SCL	   (3)	/* I2C SCL power */
-+#define SPITZ_GPIO_PWR_SDA	   (4)	/* I2C SDA power */
-+
-+/* audio codec pins */
-+
-+
-+/* Spitz/Akita UART ports */
-+
-+/* Fully Featured UART - connected to IOPORT connector */
-+#define SPITZ_GPIO_FFRXD	 (102)	/* IOPORT has nRXD inverted levels */
-+#define SPITZ_GPIO_FFTXD	  (99)	/* IOPORT has nTXD inverted levels */
-+#define SPITZ_GPIO_FFRTS	  (98)
-+#define SPITZ_GPIO_FFCTS	 (100)
-+#define SPITZ_GPIO_FFDTR	  (82)
-+#define SPITZ_GPIO_FFDSR	  (33)
-+
-+/* These UART GPIO pins are connected to Bluetooth
-+ * (only on Akita version with Bluetooth)
-+ * GPIO42_BTRXD
-+ * GPIO43_BTTXD
-+ * GPIO44_BTCTS
-+ * GPIO45_BTRTS
-+ */
-+
-+/* These UART GPIO pins are connected to IrDA:
-+ * GPIO46_STRXD
-+ * GPIO47_STTXD
-+ */
-+
- /* Spitz/Akita Keyboard Definitions */
- 
--#define SPITZ_KEY_STROBE_NUM         (11)
--#define SPITZ_KEY_SENSE_NUM          (7)
--#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
--#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
--#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
--#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
--#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
--#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
--#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
--#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
--
--#define SPITZ_GPIO_KEY_STROBE0       88
--#define SPITZ_GPIO_KEY_STROBE1       23
--#define SPITZ_GPIO_KEY_STROBE2       24
--#define SPITZ_GPIO_KEY_STROBE3       25
--#define SPITZ_GPIO_KEY_STROBE4       26
--#define SPITZ_GPIO_KEY_STROBE5       27
--#define SPITZ_GPIO_KEY_STROBE6       52
--#define SPITZ_GPIO_KEY_STROBE7       103
--#define SPITZ_GPIO_KEY_STROBE8       107
--#define SPITZ_GPIO_KEY_STROBE9       108
--#define SPITZ_GPIO_KEY_STROBE10      114
--
--#define SPITZ_GPIO_KEY_SENSE0        12
--#define SPITZ_GPIO_KEY_SENSE1        17
--#define SPITZ_GPIO_KEY_SENSE2        91
--#define SPITZ_GPIO_KEY_SENSE3        34
--#define SPITZ_GPIO_KEY_SENSE4        36
--#define SPITZ_GPIO_KEY_SENSE5        38
--#define SPITZ_GPIO_KEY_SENSE6        39
-+#define SPITZ_KEY_STROBE_NUM	  (11)
-+#define SPITZ_KEY_SENSE_NUM	   (7)
-+#define SPITZ_GPIO_G0_STROBE_BIT  0x0f800000
-+#define SPITZ_GPIO_G1_STROBE_BIT  0x00100000
-+#define SPITZ_GPIO_G2_STROBE_BIT  0x01000000
-+#define SPITZ_GPIO_G3_STROBE_BIT  0x00041880
-+#define SPITZ_GPIO_G0_SENSE_BIT   0x00021000
-+#define SPITZ_GPIO_G1_SENSE_BIT   0x000000d4
-+#define SPITZ_GPIO_G2_SENSE_BIT   0x08000000
-+#define SPITZ_GPIO_G3_SENSE_BIT   0x00000000
-+#define SPITZ_GPIO_KEY_STROBE0	  (88)
-+#define SPITZ_GPIO_KEY_STROBE1	  (23)
-+#define SPITZ_GPIO_KEY_STROBE2	  (24)
-+#define SPITZ_GPIO_KEY_STROBE3	  (25)
-+#define SPITZ_GPIO_KEY_STROBE4	  (26)
-+#define SPITZ_GPIO_KEY_STROBE5	  (27)
-+#define SPITZ_GPIO_KEY_STROBE6	  (52)
-+#define SPITZ_GPIO_KEY_STROBE7   (103)
-+#define SPITZ_GPIO_KEY_STROBE8   (107)
-+#define SPITZ_GPIO_KEY_STROBE9   (108)
-+#define SPITZ_GPIO_KEY_STROBE10  (114)
-+#define SPITZ_GPIO_KEY_SENSE0	  (12)
-+#define SPITZ_GPIO_KEY_SENSE1	  (17)
-+#define SPITZ_GPIO_KEY_SENSE2	  (91)
-+#define SPITZ_GPIO_KEY_SENSE3	  (34)
-+#define SPITZ_GPIO_KEY_SENSE4	  (36)
-+#define SPITZ_GPIO_KEY_SENSE5	  (38)
-+#define SPITZ_GPIO_KEY_SENSE6	  (39)
-+
-+#define SPITZ_GPIO_SWA		  (97)	/* Keyboard Interrupt A */
-+#define SPITZ_GPIO_SWB		  (96)	/* Keyboard Interrupt B */
-+#define SPITZ_GPIO_ON_KEY	  (95)	/* Power On Key */
- 
- 
--/* Spitz Scoop Device (No. 1) GPIOs */
-+/* Spitz/Akita Scoop Device (No. 1) GPIOs */
- /* Suspend States in comments */
--#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
--#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
--#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
--#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
--#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
--#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
--#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
--#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
--#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
-+#define SPITZ_SCP_LED_GREEN	SCOOP_GPCR_PA11  /* Green LED, Keep */
-+#define SPITZ_SCP_JK_B		SCOOP_GPCR_PA12  /* Fast Charge On, Keep */
-+#define SPITZ_SCP_CHRG_ON	SCOOP_GPCR_PA13  /* Charge On, Keep */
-+#define SPITZ_SCP_MUTE_L	SCOOP_GPCR_PA14  /* Extra Mute Left, Low */
-+#define SPITZ_SCP_MUTE_R	SCOOP_GPCR_PA15  /* Extra Mute Right, Low */
-+#define SPITZ_SCP_CF_POWER	SCOOP_GPCR_PA16  /* CF+SD Power Circuit, Keep */
-+#define SPITZ_SCP_LED_ORANGE	SCOOP_GPCR_PA17  /* Orange LED, Keep */
-+#define SPITZ_SCP_JK_A		SCOOP_GPCR_PA18  /* Dummy Load, Low */
-+#define SPITZ_SCP_ADC_TEMP_ON	SCOOP_GPCR_PA19  /* Battery Sensor On, Low */
- 
- #define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
--                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
--                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-+			       SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
-+			       SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
- #define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
- #define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
- #define SPITZ_SCP_SUS_SET     0
- 
- /* Spitz Scoop Device (No. 2) GPIOs */
--/* Suspend States in comments */
--#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
--#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
--#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
--#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
--#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
--#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
--#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
--#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
--#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
-+/* Suspend States in comments
-+ * Spitz only, Akita uses corresponding AKITA_IOEXP_ */
-+#define SPITZ_SCP2_IR_ON	   SCOOP_GPCR_PA11  /* IrDA On, High */
-+#define SPITZ_SCP2_AKIN_PULLUP	   SCOOP_GPCR_PA12  /* Pull-Up for Remote, Keep */
-+#define SPITZ_SCP2_RESERVED_1	   SCOOP_GPCR_PA13  /* High */
-+#define SPITZ_SCP2_RESERVED_2	   SCOOP_GPCR_PA14  /* Low */
-+#define SPITZ_SCP2_RESERVED_3	   SCOOP_GPCR_PA15  /* Low */
-+#define SPITZ_SCP2_RESERVED_4	   SCOOP_GPCR_PA16  /* Low */
-+#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Backlight Control, Low */
-+#define SPITZ_SCP2_BACKLIGHT_ON	   SCOOP_GPCR_PA18  /* Backlight On, Low */
-+#define SPITZ_SCP2_MIC_BIAS	   SCOOP_GPCR_PA19  /* Mic Bias On, Low */
- 
- #define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
--                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
--                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-+			   SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-+			   SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
- 
- #define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
- #define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
--                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-+			     SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
- #define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
- 
- 
--/* Spitz IRQ Definitions */
-+/* Spitz/Akita IRQ Definitions */
- 
--#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
--#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
--#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
--#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
--#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
--#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
--#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
--#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
--#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
-+#define SPITZ_IRQ_GPIO_KEY_INT	      IRQ_GPIO(SPITZ_GPIO_KEY_INT)
-+#define SPITZ_IRQ_GPIO_AC_IN	      IRQ_GPIO(SPITZ_GPIO_AC_IN)
-+#define SPITZ_IRQ_GPIO_AK_INT	      IRQ_GPIO(SPITZ_GPIO_AK_INT)
-+#define SPITZ_IRQ_GPIO_HP_IN	      IRQ_GPIO(SPITZ_GPIO_HP_IN)
-+#define SPITZ_IRQ_GPIO_TP_INT	      IRQ_GPIO(SPITZ_GPIO_TP_INT)
-+#define SPITZ_IRQ_GPIO_SYNC	      IRQ_GPIO(SPITZ_GPIO_SYNC)
-+#define SPITZ_IRQ_GPIO_ON_KEY	      IRQ_GPIO(SPITZ_GPIO_ON_KEY)
-+#define SPITZ_IRQ_GPIO_SWA	      IRQ_GPIO(SPITZ_GPIO_SWA)
-+#define SPITZ_IRQ_GPIO_SWB	      IRQ_GPIO(SPITZ_GPIO_SWB)
- #define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
- #define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
--#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
--#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
--#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
--#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
--#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
-+#define SPITZ_IRQ_GPIO_CF_IRQ	      IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
-+#define SPITZ_IRQ_GPIO_CF_CD	      IRQ_GPIO(SPITZ_GPIO_CF_CD)
-+#define SPITZ_IRQ_GPIO_CF2_IRQ	      IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
-+#define SPITZ_IRQ_GPIO_nSD_INT	      IRQ_GPIO(SPITZ_GPIO_nSD_INT)
- #define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
- 
- /*
-@@ -156,3 +274,5 @@
- extern struct platform_device spitzscoop2_device;
- extern struct platform_device spitzssp_device;
- extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
-+
-+#endif
-Index: linux-2.6.26-rc4/sound/arm/pxa2xx-ac97.c
-===================================================================
---- linux-2.6.26-rc4.orig/sound/arm/pxa2xx-ac97.c	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/sound/arm/pxa2xx-ac97.c	2008-06-02 00:19:38.000000000 +0100
-@@ -156,10 +156,10 @@
- #ifdef CONFIG_PXA27x
- 		/* warm reset broken on Bulverde,
- 		   so manually keep AC97 reset high */
--		pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); 
-+		pxa_gpio_mode(GPIO113_AC97_RESET_N | GPIO_OUT | GPIO_DFLT_HIGH); 
- 		udelay(10);
- 		GCR |= GCR_WARM_RST;
--		pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-+		pxa_gpio_mode(GPIO113_AC97_RESET_N_MD);
- 		udelay(500);
- #elif defined(CONFIG_PXA3xx)
- 		timeout = 100;
-@@ -364,7 +364,7 @@
- 	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
- #ifdef CONFIG_PXA27x
- 	/* Use GPIO 113 as AC97 Reset on Bulverde */
--	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-+	pxa_gpio_mode(GPIO113_AC97_RESET_N_MD | GPIO_ALT_FN_2_OUT);
- 	ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
- 	if (IS_ERR(ac97conf_clk)) {
- 		ret = PTR_ERR(ac97conf_clk);
-Index: linux-2.6.26-rc4/include/asm-arm/arch-pxa/pxa2xx-gpio.h
-===================================================================
---- linux-2.6.26-rc4.orig/include/asm-arm/arch-pxa/pxa2xx-gpio.h	2008-06-02 00:18:07.000000000 +0100
-+++ linux-2.6.26-rc4/include/asm-arm/arch-pxa/pxa2xx-gpio.h	2008-06-02 00:18:28.000000000 +0100
-@@ -138,6 +138,7 @@
- #define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
- #define GPIO103_CIF_DD_3	103	/* Camera data pin 3 */
- #define GPIO104_CIF_DD_2	104	/* Camera data pin 2 */
-+#define GPIO104_pSKTSEL		104     /* PCMCIA Socket Select (PXA27x) */
- #define GPIO105_CIF_DD_1	105	/* Camera data pin 1 */
- #define GPIO106_CIF_DD_9	106	/* Camera data pin 9 */
- #define GPIO107_CIF_DD_8	107	/* Camera data pin 8 */
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/versatile-armv6.patch b/packages/kexecboot/linux-kexecboot-2.6.26/versatile-armv6.patch
deleted file mode 100644
index 6f2ca26a9a..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/versatile-armv6.patch
+++ /dev/null
@@ -1,17 +0,0 @@
----
- arch/arm/mm/Kconfig |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: linux-2.6.26-rc4/arch/arm/mm/Kconfig
-===================================================================
---- linux-2.6.26-rc4.orig/arch/arm/mm/Kconfig	2008-05-26 19:08:11.000000000 +0100
-+++ linux-2.6.26-rc4/arch/arm/mm/Kconfig	2008-06-01 18:40:07.000000000 +0100
-@@ -387,7 +387,7 @@
- # ARMv6
- config CPU_V6
- 	bool "Support ARM V6 processor"
--	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
-+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || ARCH_VERSATILE_PB
- 	default y if ARCH_MX3
- 	default y if ARCH_MSM7X00A
- 	select CPU_32v6
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/zaurus-i2c-init.patch b/packages/kexecboot/linux-kexecboot-2.6.26/zaurus-i2c-init.patch
deleted file mode 100644
index 40214e42b0..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/zaurus-i2c-init.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-Typo in poodle chunk fixed: set_pxa_i2c_info->pxa_set_i2c_info.
-
-From: Mark Brown <broonie@opensource.wolfsonmicro.com>
-To: Richard Purdie <rpurdie@rpsys.net>
-Date: Wed, 16 Jul 2008 23:19:36 +0100
-Message-Id: <1216246776-4500-1-git-send-email-broonie@opensource.wolfsonmicro.com>
-List-Id: ARM Linux kernel discussions
-	<linux-arm-kernel.lists.arm.linux.org.uk>
-
-Both spitz and poodle have audio codecs on their primary I2C bus so need
-to call pxa_set_i2c_info() to set it up during init.  Tested on spitz by
-Stanislav.
-
-Reported-by: Stanislav Brabec <utx@penguin.cz>
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
----
- arch/arm/mach-pxa/poodle.c |    2 ++
- arch/arm/mach-pxa/spitz.c  |    2 ++
- 2 files changed, 4 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
-index 39612cf..510018b 100644
---- a/arch/arm/mach-pxa/poodle.c
-+++ b/arch/arm/mach-pxa/poodle.c
-@@ -36,6 +36,7 @@
- #include <asm/arch/pxa2xx-gpio.h>
- #include <asm/arch/mmc.h>
- #include <asm/arch/udc.h>
-+#include <asm/arch/i2c.h>
- #include <asm/arch/irda.h>
- #include <asm/arch/poodle.h>
- #include <asm/arch/pxafb.h>
-@@ -387,6 +388,7 @@ static void __init poodle_init(void)
- 	pxa_set_udc_info(&udc_info);
- 	pxa_set_mci_info(&poodle_mci_platform_data);
- 	pxa_set_ficp_info(&poodle_ficp_platform_data);
-+	pxa_set_i2c_info(NULL);
- 
- 	platform_scoop_config = &poodle_pcmcia_config;
- 
-diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
-index 35616a5..e2bde09 100644
---- a/arch/arm/mach-pxa/spitz.c
-+++ b/arch/arm/mach-pxa/spitz.c
-@@ -38,6 +38,7 @@
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/pxa2xx-regs.h>
- #include <asm/arch/pxa2xx-gpio.h>
-+#include <asm/arch/i2c.h>
- #include <asm/arch/irda.h>
- #include <asm/arch/mmc.h>
- #include <asm/arch/ohci.h>
-@@ -572,6 +573,7 @@ static void __init common_init(void)
- 	pxa_set_ficp_info(&spitz_ficp_platform_data);
- 	set_pxa_fb_parent(&spitzssp_device.dev);
- 	set_pxa_fb_info(&spitz_pxafb_info);
-+	pxa_set_i2c_info(NULL);
- }
- 
- #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
--- 
-1.5.6.2
-
-
--------------------------------------------------------------------
-List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
-FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
-Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite-boot.patch b/packages/kexecboot/linux-kexecboot-2.6.26/zylonite-boot.patch
deleted file mode 100644
index f41928eca5..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite-boot.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 04c42f566c68b757fdadf54e0e0f9dfe9f3f9b06 Mon Sep 17 00:00:00 2001
-From: eric miao <eric.miao@marvell.com>
-Date: Tue, 19 Jun 2007 16:42:53 +0800
-Subject: [PATCH] [PATCH] make zylonite boot
-
-1. reuse head-xscale.S for XSC3
-
-2. add a workaround for machine ID assignment, which should be done
-   by boot loader
----
- arch/arm/boot/compressed/Makefile      |    4 ++++
- arch/arm/boot/compressed/head-xscale.S |    5 +++++
- 2 files changed, 9 insertions(+)
-
-Index: linux-2.6-pxa3/arch/arm/boot/compressed/Makefile
-===================================================================
---- linux-2.6-pxa3.orig/arch/arm/boot/compressed/Makefile	2007-09-24 11:25:57.000000000 +0200
-+++ linux-2.6-pxa3/arch/arm/boot/compressed/Makefile	2007-09-24 12:26:53.000000000 +0200
-@@ -40,6 +40,10 @@
- OBJS		+= head-xscale.o
- endif
- 
-+ifeq ($(CONFIG_CPU_XSC3),y)
-+OBJS		+= head-xscale.o
-+endif
-+
- ifeq ($(CONFIG_PXA_SHARPSL),y)
- OBJS		+= head-sharpsl.o
- endif
-Index: linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S
-===================================================================
---- linux-2.6-pxa3.orig/arch/arm/boot/compressed/head-xscale.S	2007-09-24 11:42:27.000000000 +0200
-+++ linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S	2007-09-24 12:26:02.000000000 +0200
-@@ -33,6 +33,11 @@
- 		bic	r0, r0, #0x1000		@ clear Icache
- 		mcr	p15, 0, r0, c1, c0, 0
- 
-+#ifdef CONFIG_MACH_ZYLONITE
-+		mov	r7, #(MACH_TYPE_ZYLONITE & 0xff)
-+		orr	r7, r7, #(MACH_TYPE_ZYLONITE & 0xff00)
-+#endif
-+
- #ifdef CONFIG_ARCH_COTULLA_IDP
- 		mov	r7, #MACH_TYPE_COTULLA_IDP
- #endif
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite/defconfig b/packages/kexecboot/linux-kexecboot-2.6.26/zylonite/defconfig
deleted file mode 100644
index 3e7f96f6a7..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite/defconfig
+++ /dev/null
@@ -1,1741 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Sun Jan 20 18:42:35 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ZYLONITE=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=m
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,38400 root=/dev/mtdblock2 rootfstype=jffs2 mem=64M  dyntick=enable debug"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTSDIO is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-# CONFIG_ATMEL is not set
-CONFIG_AIRO_CS=m
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_CS=m
-# CONFIG_ZD1211RW is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=m
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-# CONFIG_USB_BELKIN is not set
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_POWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_USB_DSBR=m
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_DEFERRED_IO is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_LCD_QVGA is not set
-CONFIG_FB_PXA_LCD_VGA=y
-CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CORGI=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_OHAND_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
-CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_SYSFS is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_keypad-r0.patch b/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_keypad-r0.patch
deleted file mode 100644
index 1889b3884e..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_keypad-r0.patch
+++ /dev/null
@@ -1,1187 +0,0 @@
-Eric Miao's pxa keypad patchset backport.
----
- arch/arm/mach-pxa/devices.h                |    1 
- arch/arm/mach-pxa/generic.c                |   31 +
- arch/arm/mach-pxa/pxa27x.c                 |    2 
- arch/arm/mach-pxa/pxa300.c                 |    6 
- arch/arm/mach-pxa/pxa3xx.c                 |    1 
- arch/arm/mach-pxa/zylonite.c               |   68 +++
- drivers/input/keyboard/Kconfig             |    8 
- drivers/input/keyboard/Makefile            |    2 
- drivers/input/keyboard/pxa27x_keyboard.c   |  273 -------------
- drivers/input/keyboard/pxa27x_keypad.c     |  575 +++++++++++++++++++++++++++++
- include/asm-arm/arch-pxa/irqs.h            |    2 
- include/asm-arm/arch-pxa/pxa27x_keyboard.h |   13 
- include/asm-arm/arch-pxa/pxa27x_keypad.h   |   58 ++
- 13 files changed, 745 insertions(+), 295 deletions(-)
-
-Index: linux-2.6.23-z-input/drivers/input/keyboard/Kconfig
-===================================================================
---- linux-2.6.23-z-input.orig/drivers/input/keyboard/Kconfig	2008-02-18 01:43:28.000000000 +0100
-+++ linux-2.6.23-z-input/drivers/input/keyboard/Kconfig	2008-02-18 01:43:28.000000000 +0100
-@@ -218,13 +218,13 @@
- 	  module will be called omap-keypad.
- 
- config KEYBOARD_PXA27x
--	tristate "PXA27x keyboard support"
--	depends on PXA27x
-+	tristate "PXA27x/PXA3xx keypad support"
-+	depends on PXA27x || PXA3xx
- 	help
--	  Enable support for PXA27x matrix keyboard controller
-+	  Enable support for PXA27x/PXA3xx keypad controller
- 
- 	  To compile this driver as a module, choose M here: the
--	  module will be called pxa27x_keyboard.
-+	  module will be called pxa27x_keypad.
- 
- config KEYBOARD_AAED2000
- 	tristate "AAED-2000 keyboard"
-Index: linux-2.6.23-z-input/drivers/input/keyboard/Makefile
-===================================================================
---- linux-2.6.23-z-input.orig/drivers/input/keyboard/Makefile	2008-02-18 01:43:28.000000000 +0100
-+++ linux-2.6.23-z-input/drivers/input/keyboard/Makefile	2008-02-18 01:43:28.000000000 +0100
-@@ -18,7 +18,7 @@
- obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
- obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
- obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
--obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keyboard.o
-+obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
- obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
- obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
- obj-$(CONFIG_KEYBOARD_ASIC3)		+= asic3_keys.o
-Index: linux-2.6.23-z-input/drivers/input/keyboard/pxa27x_keypad.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23-z-input/drivers/input/keyboard/pxa27x_keypad.c	2008-02-19 01:40:04.000000000 +0100
-@@ -0,0 +1,575 @@
-+/*
-+ * linux/drivers/input/keyboard/pxa27x_keypad.c
-+ *
-+ * Driver for the pxa27x matrix keyboard controller.
-+ *
-+ * Created:	Feb 22, 2007
-+ * Author:	Rodolfo Giometti <giometti@linux.it>
-+ *
-+ * Based on a previous implementations by Kevin O'Connor
-+ * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and
-+ * on some suggestions by Nicolas Pitre <nico@cam.org>.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/input.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/mfp.h>
-+#include <asm/arch/pxa27x_keypad.h>
-+
-+#define BIT_MASK(nr)            (1UL << ((nr) % BITS_PER_LONG))
-+
-+/*
-+ * Keypad Controller registers
-+ */
-+#define KPC             0x0000 /* Keypad Control register */
-+#define KPDK            0x0008 /* Keypad Direct Key register */
-+#define KPREC           0x0010 /* Keypad Rotary Encoder register */
-+#define KPMK            0x0018 /* Keypad Matrix Key register */
-+#define KPAS            0x0020 /* Keypad Automatic Scan register */
-+
-+/* Keypad Automatic Scan Multiple Key Presser register 0-3 */
-+#define KPASMKP0        0x0028
-+#define KPASMKP1        0x0030
-+#define KPASMKP2        0x0038
-+#define KPASMKP3        0x0040
-+#define KPKDI           0x0048
-+
-+/* bit definitions */
-+#define KPC_MKRN(n)	((((n) - 1) & 0x7) << 26) /* matrix key row number */
-+#define KPC_MKCN(n)	((((n) - 1) & 0x7) << 23) /* matrix key column number */
-+#define KPC_DKN(n)	((((n) - 1) & 0x7) << 6)  /* direct key number */
-+
-+#define KPC_AS          (0x1 << 30)  /* Automatic Scan bit */
-+#define KPC_ASACT       (0x1 << 29)  /* Automatic Scan on Activity */
-+#define KPC_MI          (0x1 << 22)  /* Matrix interrupt bit */
-+#define KPC_IMKP        (0x1 << 21)  /* Ignore Multiple Key Press */
-+
-+#define KPC_MS(n)	(0x1 << (13 + (n)))	/* Matrix scan line 'n' */
-+#define KPC_MS_ALL      (0xff << 13)
-+
-+#define KPC_ME          (0x1 << 12)  /* Matrix Keypad Enable */
-+#define KPC_MIE         (0x1 << 11)  /* Matrix Interrupt Enable */
-+#define KPC_DK_DEB_SEL	(0x1 <<  9)  /* Direct Keypad Debounce Select */
-+#define KPC_DI          (0x1 <<  5)  /* Direct key interrupt bit */
-+#define KPC_RE_ZERO_DEB (0x1 <<  4)  /* Rotary Encoder Zero Debounce */
-+#define KPC_REE1        (0x1 <<  3)  /* Rotary Encoder1 Enable */
-+#define KPC_REE0        (0x1 <<  2)  /* Rotary Encoder0 Enable */
-+#define KPC_DE          (0x1 <<  1)  /* Direct Keypad Enable */
-+#define KPC_DIE         (0x1 <<  0)  /* Direct Keypad interrupt Enable */
-+
-+#define KPDK_DKP        (0x1 << 31)
-+#define KPDK_DK(n)	((n) & 0xff)
-+
-+#define KPREC_OF1       (0x1 << 31)
-+#define kPREC_UF1       (0x1 << 30)
-+#define KPREC_OF0       (0x1 << 15)
-+#define KPREC_UF0       (0x1 << 14)
-+
-+#define KPREC_RECOUNT0(n)	((n) & 0xff)
-+#define KPREC_RECOUNT1(n)	(((n) >> 16) & 0xff)
-+
-+#define KPMK_MKP        (0x1 << 31)
-+#define KPAS_SO         (0x1 << 31)
-+#define KPASMKPx_SO     (0x1 << 31)
-+
-+#define KPAS_MUKP(n)	(((n) >> 26) & 0x1f)
-+#define KPAS_RP(n)	(((n) >> 4) & 0xf)
-+#define KPAS_CP(n)	((n) & 0xf)
-+
-+#define KPASMKP_MKC_MASK	(0xff)
-+
-+#define keypad_readl(off)	__raw_readl(keypad->mmio_base + (off))
-+#define keypad_writel(off, v)	__raw_writel((v), keypad->mmio_base + (off))
-+
-+#define MAX_MATRIX_KEY_NUM	(8 * 8)
-+
-+struct pxa27x_keypad {
-+	struct pxa27x_keypad_platform_data *pdata;
-+
-+	struct clk *clk;
-+	struct input_dev *input_dev;
-+	void __iomem *mmio_base;
-+
-+	/* matrix key code map */
-+	unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM];
-+
-+	/* state row bits of each column scan */
-+	uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS];
-+	uint32_t direct_key_state;
-+
-+	unsigned int direct_key_mask;
-+
-+	int rotary_rel_code[2];
-+	int rotary_up_key[2];
-+	int rotary_down_key[2];
-+};
-+
-+static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
-+{
-+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
-+	struct input_dev *input_dev = keypad->input_dev;
-+	unsigned int *key;
-+	int i;
-+
-+	key = &pdata->matrix_key_map[0];
-+	for (i = 0; i < pdata->matrix_key_map_size; i++, key++) {
-+		int row = ((*key) >> 28) & 0xf;
-+		int col = ((*key) >> 24) & 0xf;
-+		int code = (*key) & 0xffffff;
-+
-+		keypad->matrix_keycodes[(row << 3) + col] = code;
-+		set_bit(code, input_dev->keybit);
-+	}
-+
-+	keypad->rotary_up_key[0] = pdata->rotary0_up_key;
-+	keypad->rotary_up_key[1] = pdata->rotary1_up_key;
-+	keypad->rotary_down_key[0] = pdata->rotary0_down_key;
-+	keypad->rotary_down_key[1] = pdata->rotary1_down_key;
-+	keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
-+	keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
-+
-+	if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
-+		set_bit(pdata->rotary0_up_key, input_dev->keybit);
-+		set_bit(pdata->rotary0_down_key, input_dev->keybit);
-+	} else
-+		set_bit(pdata->rotary0_rel_code, input_dev->relbit);
-+
-+	if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
-+		set_bit(pdata->rotary1_up_key, input_dev->keybit);
-+		set_bit(pdata->rotary1_down_key, input_dev->keybit);
-+	} else
-+		set_bit(pdata->rotary1_rel_code, input_dev->relbit);
-+}
-+
-+static inline unsigned int lookup_matrix_keycode(
-+		struct pxa27x_keypad *keypad, int row, int col)
-+{
-+	return keypad->matrix_keycodes[(row << 3) + col];
-+}
-+
-+static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad)
-+{
-+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
-+	int row, col, num_keys_pressed = 0;
-+	uint32_t new_state[MAX_MATRIX_KEY_COLS];
-+	uint32_t kpas = keypad_readl(KPAS);
-+
-+	num_keys_pressed = KPAS_MUKP(kpas);
-+
-+	memset(new_state, 0, sizeof(new_state));
-+
-+	if (num_keys_pressed == 0)
-+		goto scan;
-+
-+	if (num_keys_pressed == 1) {
-+		col = KPAS_CP(kpas);
-+		row = KPAS_RP(kpas);
-+
-+		/* if invalid row/col, treat as no key pressed */
-+		if (col >= pdata->matrix_key_cols ||
-+		    row >= pdata->matrix_key_rows)
-+			goto scan;
-+
-+		new_state[col] = (1 << row);
-+		goto scan;
-+	}
-+
-+	if (num_keys_pressed > 1) {
-+		uint32_t kpasmkp0 = keypad_readl(KPASMKP0);
-+		uint32_t kpasmkp1 = keypad_readl(KPASMKP1);
-+		uint32_t kpasmkp2 = keypad_readl(KPASMKP2);
-+		uint32_t kpasmkp3 = keypad_readl(KPASMKP3);
-+
-+		new_state[0] = kpasmkp0 & KPASMKP_MKC_MASK;
-+		new_state[1] = (kpasmkp0 >> 16) & KPASMKP_MKC_MASK;
-+		new_state[2] = kpasmkp1 & KPASMKP_MKC_MASK;
-+		new_state[3] = (kpasmkp1 >> 16) & KPASMKP_MKC_MASK;
-+		new_state[4] = kpasmkp2 & KPASMKP_MKC_MASK;
-+		new_state[5] = (kpasmkp2 >> 16) & KPASMKP_MKC_MASK;
-+		new_state[6] = kpasmkp3 & KPASMKP_MKC_MASK;
-+		new_state[7] = (kpasmkp3 >> 16) & KPASMKP_MKC_MASK;
-+	}
-+scan:
-+	for (col = 0; col < pdata->matrix_key_cols; col++) {
-+		uint32_t bits_changed;
-+
-+		bits_changed = keypad->matrix_key_state[col] ^ new_state[col];
-+		if (bits_changed == 0)
-+			continue;
-+
-+		for (row = 0; row < pdata->matrix_key_rows; row++) {
-+			if ((bits_changed & (1 << row)) == 0)
-+				continue;
-+
-+			input_report_key(keypad->input_dev,
-+				lookup_matrix_keycode(keypad, row, col),
-+				new_state[col] & (1 << row));
-+		}
-+	}
-+	input_sync(keypad->input_dev);
-+	memcpy(keypad->matrix_key_state, new_state, sizeof(new_state));
-+}
-+
-+#define DEFAULT_KPREC	(0x007f007f)
-+
-+static inline int rotary_delta(uint32_t kprec)
-+{
-+	if (kprec & KPREC_OF0)
-+		return (kprec & 0xff) + 0x7f;
-+	else if (kprec & KPREC_UF0)
-+		return (kprec & 0xff) - 0x7f - 0xff;
-+	else
-+		return (kprec & 0xff) - 0x7f;
-+}
-+
-+static void report_rotary_event(struct pxa27x_keypad *keypad, int r, int delta)
-+{
-+	struct input_dev *dev = keypad->input_dev;
-+
-+	if (delta == 0)
-+		return;
-+
-+	if (keypad->rotary_up_key[r] && keypad->rotary_down_key[r]) {
-+		int keycode = (delta > 0) ? keypad->rotary_up_key[r] :
-+					    keypad->rotary_down_key[r];
-+
-+		/* simulate a press-n-release */
-+		input_report_key(dev, keycode, 1);
-+		input_sync(dev);
-+		input_report_key(dev, keycode, 0);
-+		input_sync(dev);
-+	} else {
-+		input_report_rel(dev, keypad->rotary_rel_code[r], delta);
-+		input_sync(dev);
-+	}
-+}
-+
-+static void pxa27x_keypad_scan_rotary(struct pxa27x_keypad *keypad)
-+{
-+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
-+	uint32_t kprec;
-+
-+	/* read and reset to default count value */
-+	kprec = keypad_readl(KPREC);
-+	keypad_writel(KPREC, DEFAULT_KPREC);
-+
-+	if (pdata->enable_rotary0)
-+		report_rotary_event(keypad, 0, rotary_delta(kprec));
-+
-+	if (pdata->enable_rotary1)
-+		report_rotary_event(keypad, 1, rotary_delta(kprec >> 16));
-+}
-+
-+static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
-+{
-+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
-+	unsigned int new_state;
-+	uint32_t kpdk, bits_changed;
-+	int i;
-+
-+	kpdk = keypad_readl(KPDK);
-+
-+	if (pdata->enable_rotary0 || pdata->enable_rotary1)
-+		pxa27x_keypad_scan_rotary(keypad);
-+
-+	if (pdata->direct_key_map == NULL)
-+		return;
-+
-+	new_state = KPDK_DK(kpdk) & keypad->direct_key_mask;
-+	bits_changed = keypad->direct_key_state ^ new_state;
-+
-+	if (bits_changed == 0)
-+		return;
-+
-+	for (i = 0; i < pdata->direct_key_num; i++) {
-+		if (bits_changed & (1 << i))
-+			input_report_key(keypad->input_dev,
-+					pdata->direct_key_map[i],
-+					(new_state & (1 << i)));
-+	}
-+	input_sync(keypad->input_dev);
-+	keypad->direct_key_state = new_state;
-+}
-+
-+static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
-+{
-+	struct pxa27x_keypad *keypad = dev_id;
-+	unsigned long kpc = keypad_readl(KPC);
-+
-+	if (kpc & KPC_DI)
-+		pxa27x_keypad_scan_direct(keypad);
-+
-+	if (kpc & KPC_MI)
-+		pxa27x_keypad_scan_matrix(keypad);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
-+{
-+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
-+	unsigned int mask = 0, direct_key_num = 0;
-+	unsigned long kpc = 0;
-+
-+	/* enable matrix keys with automatic scan */
-+	if (pdata->matrix_key_rows && pdata->matrix_key_cols) {
-+		kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL;
-+		kpc |= KPC_MKRN(pdata->matrix_key_rows) |
-+		       KPC_MKCN(pdata->matrix_key_cols);
-+	}
-+
-+	/* enable rotary key, debounce interval same as direct keys */
-+	if (pdata->enable_rotary0) {
-+		mask |= 0x03;
-+		direct_key_num = 2;
-+		kpc |= KPC_REE0;
-+	}
-+
-+	if (pdata->enable_rotary1) {
-+		mask |= 0x0c;
-+		direct_key_num = 4;
-+		kpc |= KPC_REE1;
-+	}
-+
-+	if (pdata->direct_key_num > direct_key_num)
-+		direct_key_num = pdata->direct_key_num;
-+
-+	keypad->direct_key_mask = ((2 << direct_key_num) - 1) & ~mask;
-+
-+	/* enable direct key */
-+	if (direct_key_num)
-+		kpc |= KPC_DE | KPC_DIE | KPC_DKN(direct_key_num);
-+
-+	keypad_writel(KPC, kpc | KPC_RE_ZERO_DEB);
-+	keypad_writel(KPREC, DEFAULT_KPREC);
-+	keypad_writel(KPKDI, pdata->debounce_interval);
-+}
-+
-+static int pxa27x_keypad_open(struct input_dev *dev)
-+{
-+	struct pxa27x_keypad *keypad = input_get_drvdata(dev);
-+
-+	/* Enable unit clock */
-+	clk_enable(keypad->clk);
-+	pxa27x_keypad_config(keypad);
-+
-+	return 0;
-+}
-+
-+static void pxa27x_keypad_close(struct input_dev *dev)
-+{
-+	struct pxa27x_keypad *keypad = input_get_drvdata(dev);
-+
-+	/* Disable clock unit */
-+	clk_disable(keypad->clk);
-+}
-+
-+#ifdef CONFIG_PM
-+static int pxa27x_keypad_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
-+
-+	clk_disable(keypad->clk);
-+	return 0;
-+}
-+
-+static int pxa27x_keypad_resume(struct platform_device *pdev)
-+{
-+	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
-+	struct input_dev *input_dev = keypad->input_dev;
-+
-+	mutex_lock(&input_dev->mutex);
-+
-+	if (input_dev->users) {
-+		/* Enable unit clock */
-+		clk_enable(keypad->clk);
-+		pxa27x_keypad_config(keypad);
-+	}
-+
-+	mutex_unlock(&input_dev->mutex);
-+
-+	return 0;
-+}
-+#else
-+#define pxa27x_keypad_suspend	NULL
-+#define pxa27x_keypad_resume	NULL
-+#endif
-+
-+#define res_size(res)	((res)->end - (res)->start + 1)
-+
-+static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
-+{
-+	struct pxa27x_keypad *keypad;
-+	struct input_dev *input_dev;
-+	struct resource *res;
-+	int irq, error;
-+
-+	keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL);
-+	if (keypad == NULL) {
-+		dev_err(&pdev->dev, "failed to allocate driver data\n");
-+		return -ENOMEM;
-+	}
-+
-+	keypad->pdata = pdev->dev.platform_data;
-+	if (keypad->pdata == NULL) {
-+		dev_err(&pdev->dev, "no platform data defined\n");
-+		error = -EINVAL;
-+		goto failed_free;
-+	}
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "failed to get keypad irq\n");
-+		error = -ENXIO;
-+		goto failed_free;
-+	}
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (res == NULL) {
-+		dev_err(&pdev->dev, "failed to get I/O memory\n");
-+		error = -ENXIO;
-+		goto failed_free;
-+	}
-+
-+	res = request_mem_region(res->start, res_size(res), pdev->name);
-+	if (res == NULL) {
-+		dev_err(&pdev->dev, "failed to request I/O memory\n");
-+		error = -EBUSY;
-+		goto failed_free;
-+	}
-+
-+	keypad->mmio_base = ioremap(res->start, res_size(res));
-+	if (keypad->mmio_base == NULL) {
-+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-+		error = -ENXIO;
-+		goto failed_free_mem;
-+	}
-+
-+	keypad->clk = clk_get(&pdev->dev, "KBDCLK");
-+	if (IS_ERR(keypad->clk)) {
-+		dev_err(&pdev->dev, "failed to get keypad clock\n");
-+		error = PTR_ERR(keypad->clk);
-+		goto failed_free_io;
-+	}
-+
-+	/* Create and register the input driver. */
-+	input_dev = input_allocate_device();
-+	if (!input_dev) {
-+		dev_err(&pdev->dev, "failed to allocate input device\n");
-+		error = -ENOMEM;
-+		goto failed_put_clk;
-+	}
-+
-+	input_dev->name = pdev->name;
-+	input_dev->id.bustype = BUS_HOST;
-+	input_dev->open = pxa27x_keypad_open;
-+	input_dev->close = pxa27x_keypad_close;
-+	input_dev->dev.parent = &pdev->dev;
-+
-+	keypad->input_dev = input_dev;
-+	input_set_drvdata(input_dev, keypad);
-+
-+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
-+		BIT_MASK(EV_REL);
-+
-+	pxa27x_keypad_build_keycode(keypad);
-+	platform_set_drvdata(pdev, keypad);
-+
-+	error = request_irq(irq, pxa27x_keypad_irq_handler, IRQF_DISABLED,
-+			    pdev->name, keypad);
-+	if (error) {
-+		dev_err(&pdev->dev, "failed to request IRQ\n");
-+		goto failed_free_dev;
-+	}
-+
-+	/* Register the input device */
-+	error = input_register_device(input_dev);
-+	if (error) {
-+		dev_err(&pdev->dev, "failed to register input device\n");
-+		goto failed_free_irq;
-+	}
-+
-+	return 0;
-+
-+failed_free_irq:
-+	free_irq(irq, pdev);
-+	platform_set_drvdata(pdev, NULL);
-+failed_free_dev:
-+	input_free_device(input_dev);
-+failed_put_clk:
-+	clk_put(keypad->clk);
-+failed_free_io:
-+	iounmap(keypad->mmio_base);
-+failed_free_mem:
-+	release_mem_region(res->start, res_size(res));
-+failed_free:
-+	kfree(keypad);
-+	return error;
-+}
-+
-+static int __devexit pxa27x_keypad_remove(struct platform_device *pdev)
-+{
-+	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
-+	struct resource *res;
-+
-+	free_irq(platform_get_irq(pdev, 0), pdev);
-+
-+	clk_disable(keypad->clk);
-+	clk_put(keypad->clk);
-+
-+	input_unregister_device(keypad->input_dev);
-+	input_free_device(keypad->input_dev);
-+
-+	iounmap(keypad->mmio_base);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	release_mem_region(res->start, res_size(res));
-+
-+	platform_set_drvdata(pdev, NULL);
-+	kfree(keypad);
-+	return 0;
-+}
-+
-+static struct platform_driver pxa27x_keypad_driver = {
-+	.probe		= pxa27x_keypad_probe,
-+	.remove		= __devexit_p(pxa27x_keypad_remove),
-+	.suspend	= pxa27x_keypad_suspend,
-+	.resume		= pxa27x_keypad_resume,
-+	.driver		= {
-+		.name	= "pxa27x-keypad",
-+	},
-+};
-+
-+static int __init pxa27x_keypad_init(void)
-+{
-+	return platform_driver_register(&pxa27x_keypad_driver);
-+}
-+
-+static void __exit pxa27x_keypad_exit(void)
-+{
-+	platform_driver_unregister(&pxa27x_keypad_driver);
-+}
-+
-+module_init(pxa27x_keypad_init);
-+module_exit(pxa27x_keypad_exit);
-+
-+MODULE_DESCRIPTION("PXA27x Keypad Controller Driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.23-z-input/include/asm-arm/arch-pxa/pxa27x_keyboard.h
-===================================================================
---- linux-2.6.23-z-input.orig/include/asm-arm/arch-pxa/pxa27x_keyboard.h	2007-10-09 22:31:38.000000000 +0200
-+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
-@@ -1,13 +0,0 @@
--#define PXAKBD_MAXROW		8
--#define PXAKBD_MAXCOL		8
--
--struct pxa27x_keyboard_platform_data {
--	int nr_rows, nr_cols;
--	int keycodes[PXAKBD_MAXROW][PXAKBD_MAXCOL];
--	int gpio_modes[PXAKBD_MAXROW + PXAKBD_MAXCOL];
--
--#ifdef CONFIG_PM
--	u32 reg_kpc;
--	u32 reg_kprec;
--#endif
--};
-Index: linux-2.6.23-z-input/include/asm-arm/arch-pxa/pxa27x_keypad.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23-z-input/include/asm-arm/arch-pxa/pxa27x_keypad.h	2008-02-18 01:43:28.000000000 +0100
-@@ -0,0 +1,58 @@
-+#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
-+#define __ASM_ARCH_PXA27x_KEYPAD_H
-+
-+#include <linux/input.h>
-+
-+#define MAX_MATRIX_KEY_ROWS	(8)
-+#define MAX_MATRIX_KEY_COLS	(8)
-+
-+/* pxa3xx keypad platform specific parameters
-+ *
-+ * NOTE:
-+ * 1. direct_key_num indicates the number of keys in the direct keypad
-+ *    _plus_ the number of rotary-encoder sensor inputs,  this can be
-+ *    left as 0 if only rotary encoders are enabled,  the driver will
-+ *    automatically calculate this
-+ *
-+ * 2. direct_key_map is the key code map for the direct keys, if rotary
-+ *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
-+ *
-+ * 3. rotary can be either interpreted as a relative input event (e.g.
-+ *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
-+ *
-+ * 4. matrix key and direct key will use the same debounce_interval by
-+ *    default, which should be sufficient in most cases
-+ */
-+struct pxa27x_keypad_platform_data {
-+
-+	/* code map for the matrix keys */
-+	unsigned int	matrix_key_rows;
-+	unsigned int	matrix_key_cols;
-+	unsigned int	*matrix_key_map;
-+	int		matrix_key_map_size;
-+
-+	/* direct keys */
-+	int		direct_key_num;
-+	unsigned int	direct_key_map[8];
-+
-+	/* rotary encoders 0 */
-+	int		enable_rotary0;
-+	int		rotary0_rel_code;
-+	int		rotary0_up_key;
-+	int		rotary0_down_key;
-+
-+	/* rotary encoders 1 */
-+	int		enable_rotary1;
-+	int		rotary1_rel_code;
-+	int		rotary1_up_key;
-+	int		rotary1_down_key;
-+
-+	/* key debounce interval */
-+	unsigned int	debounce_interval;
-+};
-+
-+#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
-+
-+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
-+
-+#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
-Index: linux-2.6.23-z-input/drivers/input/keyboard/pxa27x_keyboard.c
-===================================================================
---- linux-2.6.23-z-input.orig/drivers/input/keyboard/pxa27x_keyboard.c	2008-02-18 01:43:28.000000000 +0100
-+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
-@@ -1,273 +0,0 @@
--/*
-- * linux/drivers/input/keyboard/pxa27x_keyboard.c
-- *
-- * Driver for the pxa27x matrix keyboard controller.
-- *
-- * Created:	Feb 22, 2007
-- * Author:	Rodolfo Giometti <giometti@linux.it>
-- *
-- * Based on a previous implementations by Kevin O'Connor
-- * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and
-- * on some suggestions by Nicolas Pitre <nico@cam.org>.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/input.h>
--#include <linux/device.h>
--#include <linux/platform_device.h>
--#include <linux/clk.h>
--#include <linux/err.h>
--
--#include <asm/mach-types.h>
--#include <asm/mach/arch.h>
--#include <asm/mach/map.h>
--
--#include <asm/arch/hardware.h>
--#include <asm/arch/pxa-regs.h>
--#include <asm/arch/irqs.h>
--#include <asm/arch/pxa27x_keyboard.h>
--
--#define DRIVER_NAME		"pxa27x-keyboard"
--
--#define KPASMKP(col)		(col/2 == 0 ? KPASMKP0 : \
--				 col/2 == 1 ? KPASMKP1 : \
--				 col/2 == 2 ? KPASMKP2 : KPASMKP3)
--#define KPASMKPx_MKC(row, col)	(1 << (row + 16 * (col % 2)))
--
--static struct clk *pxakbd_clk;
--
--static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id)
--{
--	struct platform_device *pdev = dev_id;
--	struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
--	struct input_dev *input_dev = platform_get_drvdata(pdev);
--	unsigned long kpc = KPC;
--	int p, row, col, rel;
--
--	if (kpc & KPC_DI) {
--		unsigned long kpdk = KPDK;
--
--		if (!(kpdk & KPDK_DKP)) {
--			/* better luck next time */
--		} else if (kpc & KPC_REE0) {
--			unsigned long kprec = KPREC;
--			KPREC = 0x7f;
--
--			if (kprec & KPREC_OF0)
--				rel = (kprec & 0xff) + 0x7f;
--			else if (kprec & KPREC_UF0)
--				rel = (kprec & 0xff) - 0x7f - 0xff;
--			else
--				rel = (kprec & 0xff) - 0x7f;
--
--			if (rel) {
--				input_report_rel(input_dev, REL_WHEEL, rel);
--				input_sync(input_dev);
--			}
--		}
--	}
--
--	if (kpc & KPC_MI) {
--		/* report the status of every button */
--		for (row = 0; row < pdata->nr_rows; row++) {
--			for (col = 0; col < pdata->nr_cols; col++) {
--				p = KPASMKP(col) & KPASMKPx_MKC(row, col) ?
--					1 : 0;
--				pr_debug("keycode %x - pressed %x\n",
--						pdata->keycodes[row][col], p);
--				input_report_key(input_dev,
--						pdata->keycodes[row][col], p);
--			}
--		}
--		input_sync(input_dev);
--	}
--
--	return IRQ_HANDLED;
--}
--
--static int pxakbd_open(struct input_dev *dev)
--{
--	/* Set keypad control register */
--	KPC |= (KPC_ASACT |
--		KPC_MS_ALL |
--		(2 << 6) | KPC_REE0 | KPC_DK_DEB_SEL |
--		KPC_ME | KPC_MIE | KPC_DE | KPC_DIE);
--
--	KPC &= ~KPC_AS;         /* disable automatic scan */
--	KPC &= ~KPC_IMKP;       /* do not ignore multiple keypresses */
--
--	/* Set rotary count to mid-point value */
--	KPREC = 0x7F;
--
--	/* Enable unit clock */
--	clk_enable(pxakbd_clk);
--
--	return 0;
--}
--
--static void pxakbd_close(struct input_dev *dev)
--{
--	/* Disable clock unit */
--	clk_disable(pxakbd_clk);
--}
--
--#ifdef CONFIG_PM
--static int pxakbd_suspend(struct platform_device *pdev, pm_message_t state)
--{
--	struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
--
--	/* Save controller status */
--	pdata->reg_kpc = KPC;
--	pdata->reg_kprec = KPREC;
--
--	return 0;
--}
--
--static int pxakbd_resume(struct platform_device *pdev)
--{
--	struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
--	struct input_dev *input_dev = platform_get_drvdata(pdev);
--
--	mutex_lock(&input_dev->mutex);
--
--	if (input_dev->users) {
--		/* Restore controller status */
--		KPC = pdata->reg_kpc;
--		KPREC = pdata->reg_kprec;
--
--		/* Enable unit clock */
--		clk_disable(pxakbd_clk);
--		clk_enable(pxakbd_clk);
--	}
--
--	mutex_unlock(&input_dev->mutex);
--
--	return 0;
--}
--#else
--#define pxakbd_suspend	NULL
--#define pxakbd_resume	NULL
--#endif
--
--static int __devinit pxakbd_probe(struct platform_device *pdev)
--{
--	struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
--	struct input_dev *input_dev;
--	int i, row, col, error;
--
--	pxakbd_clk = clk_get(&pdev->dev, "KBDCLK");
--	if (IS_ERR(pxakbd_clk)) {
--		error = PTR_ERR(pxakbd_clk);
--		goto err_clk;
--	}
--
--	/* Create and register the input driver. */
--	input_dev = input_allocate_device();
--	if (!input_dev) {
--		printk(KERN_ERR "Cannot request keypad device\n");
--		error = -ENOMEM;
--		goto err_alloc;
--	}
--
--	input_dev->name = DRIVER_NAME;
--	input_dev->id.bustype = BUS_HOST;
--	input_dev->open = pxakbd_open;
--	input_dev->close = pxakbd_close;
--	input_dev->dev.parent = &pdev->dev;
--
--	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL);
--	input_dev->relbit[LONG(REL_WHEEL)] = BIT(REL_WHEEL);
--	for (row = 0; row < pdata->nr_rows; row++) {
--		for (col = 0; col < pdata->nr_cols; col++) {
--			int code = pdata->keycodes[row][col];
--			if (code > 0)
--				set_bit(code, input_dev->keybit);
--		}
--	}
--
--	error = request_irq(IRQ_KEYPAD, pxakbd_irq_handler, IRQF_DISABLED,
--			    DRIVER_NAME, pdev);
--	if (error) {
--		printk(KERN_ERR "Cannot request keypad IRQ\n");
--		goto err_free_dev;
--	}
--
--	platform_set_drvdata(pdev, input_dev);
--
--	/* Register the input device */
--	error = input_register_device(input_dev);
--	if (error)
--		goto err_free_irq;
--
--	/* Setup GPIOs. */
--	for (i = 0; i < pdata->nr_rows + pdata->nr_cols; i++)
--		pxa_gpio_mode(pdata->gpio_modes[i]);
--
--	/*
--	 * Store rows/cols info into keyboard registers.
--	 */
--
--	KPC |= (pdata->nr_rows - 1) << 26;
--	KPC |= (pdata->nr_cols - 1) << 23;
--
--	for (col = 0; col < pdata->nr_cols; col++)
--		KPC |= KPC_MS0 << col;
--
--	return 0;
--
-- err_free_irq:
--	platform_set_drvdata(pdev, NULL);
--	free_irq(IRQ_KEYPAD, pdev);
-- err_free_dev:
--	input_free_device(input_dev);
-- err_alloc:
--	clk_put(pxakbd_clk);
-- err_clk:
--	return error;
--}
--
--static int __devexit pxakbd_remove(struct platform_device *pdev)
--{
--	struct input_dev *input_dev = platform_get_drvdata(pdev);
--
--	input_unregister_device(input_dev);
--	free_irq(IRQ_KEYPAD, pdev);
--	clk_put(pxakbd_clk);
--	platform_set_drvdata(pdev, NULL);
--
--	return 0;
--}
--
--static struct platform_driver pxakbd_driver = {
--	.probe		= pxakbd_probe,
--	.remove		= __devexit_p(pxakbd_remove),
--	.suspend	= pxakbd_suspend,
--	.resume		= pxakbd_resume,
--	.driver		= {
--		.name	= DRIVER_NAME,
--	},
--};
--
--static int __init pxakbd_init(void)
--{
--	return platform_driver_register(&pxakbd_driver);
--}
--
--static void __exit pxakbd_exit(void)
--{
--	platform_driver_unregister(&pxakbd_driver);
--}
--
--module_init(pxakbd_init);
--module_exit(pxakbd_exit);
--
--MODULE_DESCRIPTION("PXA27x Matrix Keyboard Driver");
--MODULE_LICENSE("GPL");
-Index: linux-2.6.23-z-input/arch/arm/mach-pxa/zylonite.c
-===================================================================
---- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/zylonite.c	2008-02-18 01:43:28.000000000 +0100
-+++ linux-2.6.23-z-input/arch/arm/mach-pxa/zylonite.c	2008-02-19 01:31:33.000000000 +0100
-@@ -25,6 +25,7 @@
- #include <asm/arch/gpio.h>
- #include <asm/arch/pxafb.h>
- #include <asm/arch/zylonite.h>
-+#include <asm/arch/pxa27x_keypad.h>
- 
- #include "generic.h"
- 
-@@ -173,6 +174,72 @@
- static inline void zylonite_init_lcd(void) {}
- #endif
- 
-+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
-+static unsigned int zylonite_matrix_key_map[] = {
-+       /* KEY(row, col, key_code) */
-+       KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
-+       KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
-+       KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
-+       KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
-+       KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
-+       KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
-+       KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
-+
-+       KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
-+       KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
-+       KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
-+
-+       KEY(4, 5, KEY_SPACE),
-+       KEY(5, 3, KEY_KPASTERISK),      /* * */
-+       KEY(5, 4, KEY_KPDOT),           /* #" */
-+
-+       KEY(0, 7, KEY_UP),
-+       KEY(1, 7, KEY_DOWN),
-+       KEY(2, 7, KEY_LEFT),
-+       KEY(3, 7, KEY_RIGHT),
-+       KEY(2, 6, KEY_HOME),
-+       KEY(3, 6, KEY_END),
-+       KEY(6, 4, KEY_DELETE),
-+       KEY(6, 6, KEY_BACK),
-+       KEY(6, 3, KEY_CAPSLOCK),        /* KEY_LEFTSHIFT), */
-+
-+       KEY(4, 6, KEY_ENTER),           /* scroll push */
-+       KEY(5, 7, KEY_ENTER),           /* keypad action */
-+
-+       KEY(0, 4, KEY_EMAIL),
-+       KEY(5, 6, KEY_SEND),
-+       KEY(4, 0, KEY_CALENDAR),
-+       KEY(7, 6, KEY_RECORD),
-+       KEY(6, 7, KEY_VOLUMEUP),
-+       KEY(7, 7, KEY_VOLUMEDOWN),
-+
-+       KEY(0, 6, KEY_F22),     /* soft1 */
-+       KEY(1, 6, KEY_F23),     /* soft2 */
-+       KEY(0, 3, KEY_AUX),     /* contact */
-+};
-+
-+static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
-+       .matrix_key_rows        = 8,
-+       .matrix_key_cols        = 8,
-+       .matrix_key_map         = zylonite_matrix_key_map,
-+       .matrix_key_map_size    = ARRAY_SIZE(zylonite_matrix_key_map),
-+
-+       .enable_rotary0         = 1,
-+       .rotary0_up_key         = KEY_UP,
-+       .rotary0_down_key       = KEY_DOWN,
-+
-+       .debounce_interval      = 30,
-+};
-+
-+static void __init zylonite_init_keypad(void)
-+{
-+       pxa_set_keypad_info(&zylonite_keypad_info);
-+}
-+#else
-+static inline void zylonite_init_keypad(void) {}
-+#endif
-+
-+
- static void __init zylonite_init(void)
- {
- 	/* board-processor specific initialization */
-@@ -190,6 +257,7 @@
- 	platform_device_register(&touch_device);
- 
- 	zylonite_init_lcd();
-+	zylonite_init_keypad();
- }
- 
- MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-Index: linux-2.6.23-z-input/arch/arm/mach-pxa/devices.h
-===================================================================
---- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/devices.h	2008-02-18 01:43:28.000000000 +0100
-+++ linux-2.6.23-z-input/arch/arm/mach-pxa/devices.h	2008-02-18 01:43:28.000000000 +0100
-@@ -12,3 +12,4 @@
- 
- extern struct platform_device pxa27x_device_i2c_power;
- extern struct platform_device pxa27x_device_ohci;
-+extern struct platform_device pxa27x_device_keypad;
-Index: linux-2.6.23-z-input/arch/arm/mach-pxa/generic.c
-===================================================================
---- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/generic.c	2008-02-18 01:43:28.000000000 +0100
-+++ linux-2.6.23-z-input/arch/arm/mach-pxa/generic.c	2008-02-18 01:43:28.000000000 +0100
-@@ -450,3 +450,34 @@
- 	.name		= "sa1100-rtc",
- 	.id		= -1,
- };
-+
-+static struct resource pxa27x_resource_keypad[] = {
-+       [0] = {
-+               .start  = 0x41500000,
-+               .end    = 0x4150004c,
-+               .flags  = IORESOURCE_MEM,
-+       },
-+       [1] = {
-+               .start  = IRQ_KEYPAD,
-+               .end    = IRQ_KEYPAD,
-+               .flags  = IORESOURCE_IRQ,
-+       },
-+};
-+
-+struct platform_device pxa27x_device_keypad = {
-+       .name           = "pxa27x-keypad",
-+       .id             = -1,
-+       .resource       = pxa27x_resource_keypad,
-+       .num_resources  = ARRAY_SIZE(pxa27x_resource_keypad),
-+};
-+
-+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
-+{
-+	int ret;
-+
-+	pxa27x_device_keypad.dev.platform_data = info;
-+
-+	ret = platform_device_register(&pxa27x_device_keypad);
-+	if (ret)
-+		dev_err(&pxa27x_device_keypad.dev, "unable to register device: %d\n", ret);
-+}
-Index: linux-2.6.23-z-input/arch/arm/mach-pxa/pxa27x.c
-===================================================================
---- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/pxa27x.c	2008-02-18 01:43:28.000000000 +0100
-+++ linux-2.6.23-z-input/arch/arm/mach-pxa/pxa27x.c	2008-02-18 01:43:28.000000000 +0100
-@@ -148,7 +148,7 @@
- 
- 	INIT_CKEN("USBCLK", USB,    48000000, 0, &pxa27x_device_ohci.dev),
- 	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
--	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
-+	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev),
- 
- 	/*
- 	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
-Index: linux-2.6.23-z-input/arch/arm/mach-pxa/pxa3xx.c
-===================================================================
---- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/pxa3xx.c	2008-02-18 01:43:28.000000000 +0100
-+++ linux-2.6.23-z-input/arch/arm/mach-pxa/pxa3xx.c	2008-02-19 01:32:40.000000000 +0100
-@@ -159,6 +159,7 @@
- static struct clk pxa3xx_clks[] = {
- 	INIT_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
- 	INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
-+	INIT_CK("KBDCLK", KEYPAD, &clk_pxa3xx_hsio_ops, &pxa27x_device_keypad.dev),
- 
- 	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
- 	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
-Index: linux-2.6.23-z-input/include/asm-arm/arch-pxa/irqs.h
-===================================================================
---- linux-2.6.23-z-input.orig/include/asm-arm/arch-pxa/irqs.h	2008-02-18 01:43:28.000000000 +0100
-+++ linux-2.6.23-z-input/include/asm-arm/arch-pxa/irqs.h	2008-02-18 01:43:28.000000000 +0100
-@@ -13,7 +13,7 @@
- 
- #define PXA_IRQ(x)	(x)
- 
--#ifdef CONFIG_PXA27x
-+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- #define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
- #define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
- #define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
-Index: linux-2.6.23-z-input/arch/arm/mach-pxa/pxa300.c
-===================================================================
---- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/pxa300.c	2008-02-19 01:33:58.000000000 +0100
-+++ linux-2.6.23-z-input/arch/arm/mach-pxa/pxa300.c	2008-02-19 01:34:35.000000000 +0100
-@@ -23,8 +23,10 @@
- 
- 	MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
- 	MFP_ADDR_X(GPIO3,   GPIO26,  0x027c),
--	MFP_ADDR_X(GPIO27,  GPIO127, 0x0400),
--	MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec),
-+	MFP_ADDR_X(GPIO27,  GPIO98,  0x0400),
-+	MFP_ADDR_X(GPIO99,  GPIO127, 0x0600),
-+	MFP_ADDR_X(GPIO0_2, GPIO1_2, 0x0674),
-+	MFP_ADDR_X(GPIO2_2, GPIO6_2, 0x02dc),
- 
- 	MFP_ADDR(nBE0, 0x0204),
- 	MFP_ADDR(nBE1, 0x0208),
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_mtd-r0.patch b/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_mtd-r0.patch
deleted file mode 100644
index cb5a9c5f72..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_mtd-r0.patch
+++ /dev/null
@@ -1,4093 +0,0 @@
-Gross hacks to make the Zylonite boot from flash in VGA.
-
-Flash driver forward ported to 2.6.14
-
-Index: linux-2.6.23/drivers/mtd/nand/Kconfig
-===================================================================
---- linux-2.6.23.orig/drivers/mtd/nand/Kconfig	2007-10-09 21:31:38.000000000 +0100
-+++ linux-2.6.23/drivers/mtd/nand/Kconfig	2008-02-13 00:59:45.000000000 +0000
-@@ -223,6 +223,10 @@
- 	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
- 	depends on ARCH_PXA
- 
-+config MTD_NAND_ZYLONITE
-+	tristate "Support for NAND Flash on Zylonite"
-+	depends on ARCH_PXA
-+
- config MTD_NAND_BASLER_EXCITE
- 	tristate  "Support for NAND Flash on Basler eXcite"
- 	depends on BASLER_EXCITE
-Index: linux-2.6.23/drivers/mtd/nand/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/mtd/nand/Makefile	2007-10-09 21:31:38.000000000 +0100
-+++ linux-2.6.23/drivers/mtd/nand/Makefile	2008-02-13 00:59:45.000000000 +0000
-@@ -19,6 +19,7 @@
- obj-$(CONFIG_MTD_NAND_H1900)		+= h1910.o
- obj-$(CONFIG_MTD_NAND_RTC_FROM4)	+= rtc_from4.o
- obj-$(CONFIG_MTD_NAND_SHARPSL)		+= sharpsl.o
-+obj-$(CONFIG_MTD_NAND_ZYLONITE)		+= mhn_nand.o
- obj-$(CONFIG_MTD_NAND_TS7250)		+= ts7250.o
- obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
- obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
-Index: linux-2.6.23/drivers/mtd/nand/mhn_nand.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/mtd/nand/mhn_nand.c	2008-02-13 00:59:45.000000000 +0000
-@@ -0,0 +1,3869 @@
-+/*
-+ *  drivers/mtd/nand/mhn_nand.c
-+ *
-+ *  Copyright (C) 2005 Intel Coporation (chao.xie@intel.com)
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *  Overview:
-+ *   This is a device driver for the NAND flash device on zylonite board
-+ *   which utilizes the Samsung K9K1216Q0C parts. This is a 64Mibit NAND
-+ *   flash device.
-+
-+ *(C) Copyright 2006 Marvell International Ltd.
-+ * All Rights Reserved
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/interrupt.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/delay.h>
-+#include <asm/dma.h>
-+#include <asm/arch/mfp.h>
-+//#include <asm/arch/cpu-freq-voltage-mhn.h>
-+
-+//#define NDCR 0xf0000000
-+//#define NDCR        (*((volatile u32 *)0xf0000000))
-+//#define NDCR              __REG_2(0x43100000)  /* Data Flash Control register */
-+#define NDCR_SPARE_EN             (0x1<<31)
-+#define NDCR_ECC_EN               (0x1<<30)
-+#define NDCR_DMA_EN               (0x1<<29)
-+#define NDCR_ND_RUN               (0x1<<28)
-+#define NDCR_DWIDTH_C             (0x1<<27)
-+#define NDCR_DWIDTH_M             (0x1<<26)
-+#define NDCR_PAGE_SZ              (0x1<<24)
-+#define NDCR_NCSX         (0x1<<23)
-+#define NDCR_ND_MODE              (0x3<<21)
-+#define NDCR_NAND_MODE    0x0
-+#define NDCR_CLR_PG_CNT           (0x1<<20)
-+#define NDCR_CLR_ECC      (       0x1<<19)
-+#define NDCR_RD_ID_CNT_MASK       (0x7<<16)
-+#define NDCR_RD_ID_CNT(x)       (((x) << 16) & NDCR_RD_ID_CNT_MASK)
-+#define NDCR_RA_START     (0x1<<15)
-+#define NDCR_PG_PER_BLK   (0x1<<14)
-+#define NDCR_ND_ARB_EN    (0x1<<12)
-+
-+//#define NDSR        (*((volatile u32 *)0xf0000014))
-+//#define NDSR              __REG_2(0x43100014)  /* Data Controller Status Register */
-+#define NDSR_RDY  (0x1<<11)
-+#define NDSR_CS0_PAGED    (0x1<<10)
-+#define NDSR_CS1_PAGED    (0x1<<9)
-+#define NDSR_CS0_CMDD     (0x1<<8)
-+#define NDSR_CS1_CMDD     (0x1<<7)
-+#define NDSR_CS0_BBD      (0x1<<6)
-+#define NDSR_CS1_BBD      (0x1<<5)
-+#define NDSR_DBERR        (0x1<<4)
-+#define NDSR_SBERR        (0x1<<3)
-+#define NDSR_WRDREQ       (0x1<<2)
-+#define NDSR_RDDREQ       (0x1<<1)
-+#define NDSR_WRCMDREQ     (0x1)
-+
-+#define OSCR              __REG(0x40A00010)  /* OS Timer Counter Register */
-+//#define NDCB0             __REG_2(0x43100048)  /* Data Controller Command Buffer0 */
-+//#define NDCB1             __REG_2(0x4310004C)  /* Data Controller Command Buffer1 */
-+//#define NDCB2             __REG_2(0x43100050)  /* Data Controller Command Buffer2 */
-+#define NDCB0_AUTO_RS             (0x1<<25)
-+#define NDCB0_CSEL                (0x1<<24)
-+#define NDCB0_CMD_TYPE_MASK       (0x7<<21)
-+#define   NDCB0_CMD_TYPE(x)       (((x) << 21) & NDCB0_CMD_TYPE_MASK)
-+#define NDCB0_NC          (0x1<<20)
-+#define NDCB0_DBC         (0x1<<19)
-+#define NDCB0_ADDR_CYC_MASK       (0x7<<16)
-+#define   NDCB0_ADDR_CYC(x)       (((x) << 16) & NDCB0_ADDR_CYC_MASK)
-+#define NDCB0_CMD2_MASK           (0xff<<8)
-+#define NDCB0_CMD1_MASK           (0xff)
-+#define NDCB0_ADDR_CYC_SHIFT      (16)
-+#define DCMD0             __REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
-+#define DCMD1             __REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
-+#define DCMD2             __REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
-+#define DCMD3             __REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
-+#define DCMD4             __REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
-+#define DCMD5             __REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
-+#define DCMD6             __REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
-+#define DCMD7             __REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
-+#define DCMD8             __REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
-+#define DCMD9             __REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
-+#define DCMD10            __REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
-+#define DCMD11            __REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
-+#define DCMD12            __REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
-+#define DCMD13            __REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
-+#define DCMD14            __REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
-+#define DCMD15            __REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
-+#define DCMD(x)           __REG2(0x4000020c, (x) << 4)
-+#define DCMD_INCSRCADDR   (1 << 31)       /* Source Address Increment Setting. */
-+#define DCMD_INCTRGADDR   (1 << 30)       /* Target Address Increment Setting. */
-+#define DCMD_FLOWSRC      (1 << 29)       /* Flow Control by the source. */
-+#define DCMD_FLOWTRG      (1 << 28)       /* Flow Control by the target. */
-+#define DCMD_STARTIRQEN   (1 << 22)       /* Start Interrupt Enable */
-+#define DCMD_ENDIRQEN     (1 << 21)       /* End Interrupt Enable */
-+#define DCMD_ENDIAN       (1 << 18)       /* Device Endian-ness. */
-+#define DCMD_BURST8       (1 << 16)       /* 8 byte burst */
-+#define DCMD_BURST16      (2 << 16)       /* 16 byte burst */
-+#define DCMD_BURST32      (3 << 16)       /* 32 byte burst */
-+#define DCMD_WIDTH1       (1 << 14)       /* 1 byte width */
-+#define DCMD_WIDTH2       (2 << 14)       /* 2 byte width (HalfWord) */
-+#define DCMD_WIDTH4       (3 << 14)       /* 4 byte width (Word) */
-+#define DCMD_LENGTH       0x01fff         /* length mask (max = 8K - 1) */
-+#define DCMD_RXPCDR       (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
-+#define DCMD_RXMCDR       (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
-+#define DCMD_TXPCDR       (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
-+#define DRCMR(n)  __REG2(0x40000100, (n)<<2)
-+#define DRCMR97           __REG(0x40001184)  /* Request to Channel Map Register for NAND interface data transmit & receive Request */
-+#define DRCMR98           __REG(0x40001188)  /* Reserved */
-+#define DRCMR99           __REG(0x4000118C)  /* Request to Channel Map Register for NAND interface command transmit Request */
-+#define DRCMRRXSADR       DRCMR2
-+#define DRCMRTXSADR       DRCMR3
-+#define DRCMRRXBTRBR      DRCMR4
-+#define DRCMRTXBTTHR      DRCMR5
-+#define DRCMRRXFFRBR      DRCMR6
-+#define DRCMRTXFFTHR      DRCMR7
-+#define DRCMRRXMCDR       DRCMR8
-+#define DRCMRRXMODR       DRCMR9
-+#define DRCMRTXMODR       DRCMR10
-+#define DRCMRRXPCDR       DRCMR11
-+#define DRCMRTXPCDR       DRCMR12
-+#define DRCMRRXSSDR       DRCMR13
-+#define DRCMRTXSSDR       DRCMR14
-+#define DRCMRRXICDR       DRCMR17
-+#define DRCMRTXICDR       DRCMR18
-+#define DRCMRRXSTRBR      DRCMR19
-+#define DRCMRTXSTTHR      DRCMR20
-+#define DRCMRRXMMC        DRCMR21
-+#define DRCMRTXMMC        DRCMR22
-+#define DRCMRRXMMC2       DRCMR93
-+#define DRCMRTXMMC2       DRCMR94
-+#define DRCMRRXMMC3       DRCMR100
-+#define DRCMRTXMMC3       DRCMR101
-+#define DRCMRUDC(x)       DRCMR((x) + 24)
-+#define DRCMR_MAPVLD      (1 << 7)        /* Map Valid (read / write) */
-+#define DRCMR_CHLNUM      0x1f            /* mask for Channel Number (read / write) */
-+#define DCSR0             __REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
-+#define DCSR1             __REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
-+#define DCSR2             __REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
-+#define DCSR3             __REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
-+#define DCSR4             __REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
-+#define DCSR5             __REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
-+#define DCSR6             __REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
-+#define DCSR7             __REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
-+#define DCSR8             __REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
-+#define DCSR9             __REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
-+#define DCSR10            __REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
-+#define DCSR11            __REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
-+#define DCSR12            __REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
-+#define DCSR13            __REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
-+#define DCSR14            __REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
-+#define DCSR15            __REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
-+#define DCSR16            __REG(0x40000040)  /* DMA Control / Status Register for Channel 16 */
-+#define DCSR17            __REG(0x40000044)  /* DMA Control / Status Register for Channel 17 */
-+#define DCSR18            __REG(0x40000048)  /* DMA Control / Status Register for Channel 18 */
-+#define DCSR19            __REG(0x4000004c)  /* DMA Control / Status Register for Channel 19 */
-+#define DCSR20            __REG(0x40000050)  /* DMA Control / Status Register for Channel 20 */
-+#define DCSR21            __REG(0x40000054)  /* DMA Control / Status Register for Channel 21 */
-+#define DCSR22            __REG(0x40000058)  /* DMA Control / Status Register for Channel 22 */
-+#define DCSR23            __REG(0x4000005c)  /* DMA Control / Status Register for Channel 23 */
-+#define DCSR24            __REG(0x40000060)  /* DMA Control / Status Register for Channel 24 */
-+#define DCSR25            __REG(0x40000064)  /* DMA Control / Status Register for Channel 25 */
-+#define DCSR26            __REG(0x40000068)  /* DMA Control / Status Register for Channel 26 */
-+#define DCSR27            __REG(0x4000006c)  /* DMA Control / Status Register for Channel 27 */
-+#define DCSR28            __REG(0x40000070)  /* DMA Control / Status Register for Channel 28 */
-+#define DCSR29            __REG(0x40000074)  /* DMA Control / Status Register for Channel 29 */
-+#define DCSR30            __REG(0x40000078)  /* DMA Control / Status Register for Channel 30 */
-+#define DCSR31            __REG(0x4000007c)  /* DMA Control / Status Register for Channel 31 */
-+#define DCSR(x)           __REG2(0x40000000, (x) << 2)
-+#define DCSR_RUN  (1 << 31)       /* Run Bit (read / write) */
-+#define DCSR_NODESC       (1 << 30)       /* No-Descriptor Fetch (read / write) */
-+#define DCSR_STOPIRQEN    (1 << 29)       /* Stop Interrupt Enable (read / write) */
-+#define DCSR_EORIRQEN     (1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-+#define DCSR_EORJMPEN     (1 << 27)       /* Jump to next descriptor on EOR */
-+#define DCSR_EORSTOPEN    (1 << 26)       /* STOP on an EOR */
-+#define DCSR_SETCMPST     (1 << 25)       /* Set Descriptor Compare Status */
-+#define DCSR_CLRCMPST     (1 << 24)       /* Clear Descriptor Compare Status */
-+#define DCSR_CMPST        (1 << 10)       /* The Descriptor Compare Status */
-+#define DCSR_EORINTR      (1 << 9)        /* The end of Receive */
-+#define DCSR_REQPEND      (1 << 8)        /* Request Pending (read-only) */
-+#define DCSR_RASINTR      (1 << 4)        /* Request After Channel Stopped */
-+#define DCSR_STOPSTATE    (1 << 3)        /* Stop State (read-only) */
-+#define DCSR_ENDINTR      (1 << 2)        /* End Interrupt (read / write) */
-+#define DCSR_STARTINTR    (1 << 1)        /* Start Interrupt (read / write) */
-+#define DCSR_BUSERR       (1 << 0)        /* Bus Error Interrupt (read / write) */
-+#define DDADR(x)  __REG2(0x40000200, (x) << 4)
-+//#define __REG_2(x)        (*((volatile u32 *)io_p2v_2(x)))
-+#define IRQ_NAND      PXA_IRQ(45)
-+#define   CKEN_NAND       4       ///< NAND Flash Controller Clock Enable
-+
-+/* #define CONFIG_MTD_NAND_MONAHANS_DEBUG */
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DEBUG
-+#define D1(x) do { \
-+		printk(KERN_DEBUG "%s: ", __FUNCTION__); \
-+		x; \
-+	}while(0)
-+
-+#define	DPRINTK(fmt,args...) printk(KERN_DEBUG fmt, ##args )
-+#define PRINT_BUF(buf, num)	print_buf(buf, num)
-+#else
-+#define D1(x)
-+#define DPRINTK(fmt,args...)
-+#define PRINT_BUF(buf, num)
-+#endif
-+
-+/* DFC timing 0 register */
-+#define DFC_TIMING_tRP		0
-+#define DFC_TIMING_tRH		3
-+#define DFC_TIMING_tWP		8
-+#define DFC_TIMING_tWH		11
-+#define DFC_TIMING_tCS		16
-+#define DFC_TIMING_tCH		19
-+
-+/* DFC timing 1 register */
-+#define DFC_TIMING_tAR		0
-+#define DFC_TIMING_tWHR		4
-+#define DFC_TIMING_tR		16
-+
-+/* max value for each timing setting in DFC */
-+#define DFC_TIMING_MAX_tCH	7
-+#define DFC_TIMING_MAX_tCS	7
-+#define DFC_TIMING_MAX_tWH	7
-+#define DFC_TIMING_MAX_tWP	7
-+#define DFC_TIMING_MAX_tRH	7
-+#define DFC_TIMING_MAX_tRP	7
-+#define DFC_TIMING_MAX_tR	65535
-+#define DFC_TIMING_MAX_tWHR	15
-+#define DFC_TIMING_MAX_tAR	15
-+
-+/*
-+ * The Data Flash Controller Flash timing structure
-+ * For NAND flash used on Zylonite board(Samsung K9K1216Q0C),
-+ * user should use value at end of each row of following member
-+ * bracketed.
-+ */
-+struct dfc_flash_timing {
-+	uint32_t   tCH;	/* Enable signal hold time */
-+	uint32_t   tCS;	/* Enable signal setup time */
-+	uint32_t   tWH;	/* ND_nWE high duration */
-+	uint32_t   tWP;	/* ND_nWE pulse time */
-+	uint32_t   tRH;	/* ND_nRE high duration */
-+	uint32_t   tRP;	/* ND_nRE pulse width */
-+	uint32_t   tR;	/* ND_nWE high to ND_nRE low for read */
-+	uint32_t   tWHR;/* ND_nWE high to ND_nRE low delay for status read */
-+	uint32_t   tAR;	/* ND_ALE low to ND_nRE low delay */
-+};
-+
-+/* DFC command type */
-+enum {
-+	DFC_CMD_READ		= 0x00000000,
-+	DFC_CMD_PROGRAM		= 0x00200000,
-+	DFC_CMD_ERASE		= 0x00400000,
-+	DFC_CMD_READ_ID		= 0x00600000,
-+	DFC_CMD_STATUS_READ	= 0x00800000,
-+	DFC_CMD_RESET		= 0x00a00000
-+};
-+
-+/*
-+ * The Data Flash Controller Flash specification structure
-+ * For NAND flash used on Zylonite board(Samsung K9K1216Q0C),
-+ * user should use value at end of each row of following member
-+ * bracketed.
-+ */
-+struct dfc_flash_info {
-+	struct dfc_flash_timing timing; /* NAND Flash timing */
-+
-+	int	 enable_arbiter;/* Data flash bus arbiter enable (ND_ARB_EN) */
-+	uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
-+	uint32_t row_addr_start;/* Row address start position (RA_START) */
-+	uint32_t read_id_bytes;	/* returned ID bytes(RD_ID_CNT) */
-+	uint32_t dfc_mode;	/* NAND, CARBONDALE, PIXLEY... (ND_MODE) */
-+	uint32_t ncsx;		/* Chip select don't care bit (NCSX) */
-+	uint32_t page_size;	/* Page size in bytes (PAGE_SZ) */
-+	uint32_t oob_size;	/* OOB size */
-+	uint32_t flash_width;	/* Width of Flash memory (DWIDTH_M) */
-+	uint32_t dfc_width;	/* Width of flash controller(DWIDTH_C) */
-+	uint32_t num_blocks;	/* Number of physical blocks in Flash */
-+	uint32_t chip_id;
-+
-+	/* command codes */
-+	uint32_t read1;		/* Read */
-+	uint32_t read2;		/* unused, DFC don't support yet */
-+	uint32_t program;	/* two cycle command */
-+	uint32_t read_status;
-+	uint32_t read_id;
-+	uint32_t erase;		/* two cycle command */
-+	uint32_t reset;
-+	uint32_t lock;		/* lock whole flash */
-+	uint32_t unlock;	/* two cycle command, supporting partial unlock */
-+	uint32_t lock_status;	/* read block lock status */
-+
-+	/* addr2ndcb1 - encode address cycles into register NDCB1 */
-+	/* ndbbr2addr - convert register NDBBR to bad block address */
-+	int (*addr2ndcb1)(uint16_t cmd, uint32_t addr, uint32_t *p);
-+	int (*ndbbr2addr)(uint16_t cmd, uint32_t ndbbr,uint32_t *p);
-+};
-+
-+enum {
-+	DFC_FLASH_NULL = 0 ,
-+	DFC_FLASH_Samsung_512Mb_X_16 = 1,
-+	DFC_FLASH_Micron_1Gb_X_8 = 2,
-+	DFC_FLASH_Micron_1Gb_X_16 = 3,
-+	DFC_FLASH_STM_1Gb_X_16 = 4,
-+	DFC_FLASH_STM_2Gb_X_16 = 5,
-+	DFC_FLASH_END,
-+};
-+
-+static int dfc_get_flash_info(int type, struct dfc_flash_info **flash_info);
-+
-+#define		DFC_NDCR	0
-+#define		DFC_NDTR0CS0	1
-+#define		DFC_NDTR1CS0	3
-+#define		DFC_NDSR	5
-+#define		DFC_NDPCR	6
-+#define		DFC_NDBDR0	7
-+#define		DFC_NDBDR1	8
-+#define		DFC_NDDB	16
-+#define		DFC_NDCB0	18
-+#define		DFC_NDCB1	19
-+#define		DFC_NDCB2	20
-+
-+/* The Data Flash Controller Mode structure */
-+struct dfc_mode {
-+	int   enable_dma;	/* DMA, or nonDMA mode */
-+	int   enable_ecc;	/* ECC on/off */
-+	int   enable_spare;	/* Spare enable */
-+	int   chip_select;	/* CS0 or CS1 */
-+};
-+
-+/* The Data Flash Controller Context structure */
-+struct dfc_context {
-+	unsigned char __iomem	*membase;	/* DFC register base */
-+	struct dfc_mode 	*dfc_mode;	/* DFC mode */
-+	int 			data_dma_ch;	/* Data DMA channel number */
-+	int 			cmd_dma_ch;	/* CMD  DMA channel number */
-+	struct dfc_flash_info 	*flash_info; /* Flash Spec */
-+	struct mtd_info 	*mtd;
-+};
-+
-+#define NDCB0_DMA_ADDR	0x43100048
-+#define NDDB_DMA_ADDR	0x43100040
-+
-+#define NDSR_MASK	0xFFF
-+
-+/* The following data is a rough evaluation */
-+
-+/* microsecond, for readID/readStatus/reset */
-+#define NAND_OTHER_TIMEOUT 		10
-+/* microsecond, for readID/readStatus/reset */
-+#define NAND_CMD_TIMEOUT		10
-+
-+#define BBT_BLOCK_BAD	0x03
-+#define BBT_BLOCK_GOOD	0x00
-+#define BBT_BLOCK_REV1	0x01
-+#define BBT_BLOCK_REV2	0x02
-+
-+#define BUFLEN		(2048 + 64)
-+
-+/*
-+ * DFC data size enumeration transfered from/to controller,
-+ * including padding (zero)to be a multiple of 32.
-+ */
-+enum {
-+	DFC_DATA_SIZE_STATUS = 8,	/* ReadStatus/ReadBlockLockStatus */
-+	DFC_DATA_SIZE_ID = 7,	/* ReadID */
-+
-+	DFC_DATA_SIZE_32 = 32,
-+	DFC_DATA_SIZE_512 = 512,	/* R/W disabling spare area */
-+	DFC_DATA_SIZE_520 = 520,	/* Spare=1, ECC=1 */
-+	DFC_DATA_SIZE_528 = 528,	/* Spare=1, ECC=0 */
-+	DFC_DATA_SIZE_544 = 544,	/* R/W enabling spare area.(DMA mode)*/
-+
-+	DFC_DATA_SIZE_64 = 64,
-+	DFC_DATA_SIZE_2048 = 2048, 	/* R/W disabling spare area */
-+	DFC_DATA_SIZE_2088 = 2088,	/* R/W enabling spare area with ecc */
-+	DFC_DATA_SIZE_2112 = 2112,	/* R/W enabling spare area without ecc*/
-+	DFC_DATA_SIZE_2096 = 2096,	/* R/W enabling spare area */
-+	DFC_DATA_SIZE_UNUSED = 0xFFFF
-+};
-+
-+/* DFC padding size enumeration transfered from/to controller */
-+enum {
-+	/*
-+	 * ReadStatus/ReadBlockLockStatus/ReadID/
-+	 * Read/Program disabling spare area(Both 512 and 2048)
-+	 * Read/Program enabling spare area, disabling ECC
-+	 */
-+	DFC_PADDING_SIZE_0 = 0,
-+
-+	/* Read/program with SPARE_EN=1, ECC_EN=0, pgSize=512 */
-+	DFC_PADDING_SIZE_16 = 16,
-+	/* for read/program with SPARE_EN=1, ECC_EN=1, pgSize=512 and 2048 */
-+	DFC_PADDING_SIZE_24 = 24,
-+	DFC_PADDING_SIZE_UNUSED = 0xFFFF
-+};
-+
-+static unsigned int flash_config = DFC_FLASH_NULL;
-+
-+void dfc_set_timing(struct dfc_context *context, struct dfc_flash_timing *t);
-+void dfc_set_dma(struct dfc_context *context);
-+void dfc_set_ecc(struct dfc_context *context);
-+void dfc_set_spare(struct dfc_context *context);
-+
-+int dfc_get_pattern(struct dfc_context *context, uint16_t cmd,
-+			int *data_size, int *padding);
-+
-+static int dfc_wait_event(struct dfc_context *context, uint32_t event,
-+		uint32_t *event_out, uint32_t timeout, int enable_int);
-+
-+int dfc_send_cmd(struct dfc_context *context, uint16_t cmd,
-+		uint32_t addr, int num_pages);
-+
-+void dfc_stop(struct dfc_context *context);
-+void dfc_read_fifo_partial(struct dfc_context *context, uint8_t *buffer,
-+			int nbytes, int data_size);
-+void dfc_write_fifo_partial(struct dfc_context *context, uint8_t *buffer,
-+			int nbytes, int data_size);
-+
-+void dfc_read_fifo(struct dfc_context *context, uint8_t *buffer, int nbytes);
-+void dfc_write_fifo(struct dfc_context *context, uint8_t *buffer, int nbytes);
-+
-+void dfc_read_badblock_addr(struct dfc_context *context, uint32_t *bbaddr);
-+
-+void dfc_clear_int(struct dfc_context *context, uint32_t int_mask);
-+void dfc_enable_int(struct dfc_context *context, uint32_t int_mask);
-+void dfc_disable_int(struct dfc_context *context, uint32_t int_mask);
-+
-+/* high level primitives */
-+int dfc_init(struct dfc_context *context, int type);
-+int dfc_init_no_gpio(struct dfc_context *context, int type);
-+
-+int dfc_reset_flash(struct dfc_context *context);
-+
-+int dfc_setup_cmd_dma(struct dfc_context *context,
-+		uint16_t cmd, uint32_t addr, int num_pages,
-+		uint32_t *buf, uint32_t buf_phys,
-+		uint32_t next_desc_phys, uint32_t dma_int_en,
-+		struct pxa_dma_desc *dma_desc);
-+
-+int dfc_setup_data_dma(struct dfc_context *context,
-+		uint16_t cmd, uint32_t buf_phys,
-+		uint32_t next_desc_phys, uint32_t dma_int_en,
-+		struct pxa_dma_desc *dma_desc);
-+
-+void dfc_start_cmd_dma(struct dfc_context *context,
-+			struct pxa_dma_desc *dma_desc);
-+void dfc_start_data_dma(struct dfc_context *context,
-+			struct pxa_dma_desc *dma_desc);
-+static int monahans_df_dev_ready(struct mtd_info *mtd);
-+
-+#ifdef CONFIG_DVFM
-+static int mhn_nand_dvfm_notifier(unsigned cmd, void *client_data, void *info);
-+static struct mhn_fv_notifier dvfm_notifier = {
-+	.name 		= "monahans-nand-flash",
-+	.priority 	= 0,
-+	.notifier_call 	= mhn_nand_dvfm_notifier,
-+};
-+#endif
-+
-+static unsigned short search_rel_block(int block, struct mtd_info *mtd);
-+
-+/*****************************************************************************
-+ * The DFC registers read/write routines
-+ *****************************************************************************/
-+static inline void dfc_write(struct dfc_context *context, int offset,
-+		unsigned long value)
-+{
-+	offset <<= 2;
-+	writel(value, context->membase + offset);
-+}
-+
-+static inline unsigned int dfc_read(struct dfc_context *context, int offset)
-+{
-+	offset <<= 2;
-+	return __raw_readl(context->membase + offset);
-+}
-+
-+/****************************************************************************
-+ * Flash Information
-+ ***************************************************************************/
-+
-+static int Samsung512MbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p);
-+static int Samsung512MbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p);
-+
-+static struct dfc_flash_info samsung512MbX16 =
-+{
-+	.timing = {
-+		.tCH = 10,	/* tCH, Enable signal hold time */
-+		.tCS = 0,	/* tCS, Enable signal setup time */
-+		.tWH = 20,	/* tWH, ND_nWE high duration */
-+		.tWP = 40,	/* tWP, ND_nWE pulse time */
-+		.tRH = 30,	/* tRH, ND_nRE high duration */
-+		.tRP = 40,	/* tRP, ND_nRE pulse width */
-+		/* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */
-+		.tR = 11123,
-+		/* tWHR, ND_nWE high to ND_nRE low delay for status read */
-+		.tWHR = 110,
-+		.tAR = 10,	/* tAR, ND_ALE low to ND_nRE low delay */
-+	},
-+	.enable_arbiter = 1,	/* Data flash bus arbiter enable */
-+	.page_per_block = 32,	/* Pages per block */
-+	.row_addr_start = 0,	/* Second cycle start, Row address start position */
-+	.read_id_bytes = 2,	/* 2 bytes, returned ID bytes */
-+	.dfc_mode = 0,		/* NAND mode */
-+	.ncsx = 0,
-+	.page_size = 512,	/* Page size in bytes */
-+	.oob_size = 16,		/* OOB size in bytes */
-+	.flash_width = 16,	/* Width of Flash memory */
-+	.dfc_width = 16,	/* Width of flash controller */
-+	.num_blocks = 4096,	/* Number of physical blocks in Flash */
-+	.chip_id =  0x46ec,
-+
-+	/* command codes */
-+	.read1 = 0x0000,	/* Read */
-+	.read2 = 0x0050,	/* Read1 unused, current DFC don't support */
-+	.program = 0x1080,	/* Write, two cycle command */
-+	.read_status = 0x0070,	/* Read status */
-+	.read_id = 0x0090,	/* Read ID */
-+	.erase =  0xD060,	/* Erase, two cycle command */
-+	.reset = 0x00FF,	/* Reset */
-+	.lock = 0x002A,		/* Lock whole flash */
-+	.unlock = 0x2423,	/* Unlock, two cycle command, supporting partial unlock */
-+	.lock_status = 0x007A,	/* Read block lock status */
-+	.addr2ndcb1 = Samsung512MbX16Addr2NDCB1,
-+	.ndbbr2addr = Samsung512MbX16NDBBR2Addr,
-+};
-+
-+static int Samsung512MbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p)
-+{
-+	uint32_t ndcb1 = 0;
-+
-+	if (addr >= 0x4000000) return -EINVAL;
-+
-+	if (cmd == samsung512MbX16.read1 || cmd == samsung512MbX16.program) {
-+		ndcb1 = (addr & 0xFF) | ((addr >> 1) & 0x01FFFF00);
-+	} else if (cmd == samsung512MbX16.erase) {
-+		ndcb1 = ((addr >> 9) & 0x00FFFFFF);
-+	}
-+
-+	*p = ndcb1;
-+	return 0;
-+
-+}
-+
-+static int Samsung512MbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p)
-+{
-+	*p = ndbbr << 9;
-+	return 0;
-+}
-+
-+static int Micron1GbX8Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p);
-+static int Micron1GbX8NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p);
-+
-+static struct dfc_flash_info micron1GbX8 =
-+{
-+	.timing = {
-+		.tCH = 10,	/* tCH, Enable signal hold time */
-+		.tCS = 25,	/* tCS, Enable signal setup time */
-+		.tWH = 15,	/* tWH, ND_nWE high duration */
-+		.tWP = 25,	/* tWP, ND_nWE pulse time */
-+		.tRH = 15,	/* tRH, ND_nRE high duration */
-+		.tRP = 25,	/* tRP, ND_nRE pulse width */
-+		/* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */
-+		.tR = 25000,
-+		/* tWHR, ND_nWE high to ND_nRE low delay for status read */
-+		.tWHR = 60,
-+		.tAR = 10,	/* tAR, ND_ALE low to ND_nRE low delay */
-+	},
-+	.enable_arbiter = 1,	/* Data flash bus arbiter enable */
-+	.page_per_block = 64,	/* Pages per block */
-+	.row_addr_start = 1,	/* Second cycle start, Row address start position */
-+	.read_id_bytes = 4,	/* Returned ID bytes */
-+	.dfc_mode = 0,		/* NAND mode */
-+	.ncsx = 0,
-+	.page_size = 2048,	/* Page size in bytes */
-+	.oob_size = 64,		/* OOB size in bytes */
-+	.flash_width = 8,	/* Width of Flash memory */
-+	.dfc_width = 8,		/* Width of flash controller */
-+	.num_blocks = 1024,	/* Number of physical blocks in Flash */
-+	.chip_id =  0xa12c,
-+	/* command codes */
-+	.read1 = 0x3000,	/* Read */
-+	.read2 = 0x0050,	/* Read1 unused, current DFC don't support */
-+	.program = 0x1080,	/* Write, two cycle command */
-+	.read_status = 0x0070,	/* Read status */
-+	.read_id = 0x0090,	/* Read ID */
-+	.erase =  0xD060,	/* Erase, two cycle command */
-+	.reset = 0x00FF,	/* Reset */
-+	.lock = 0x002A,		/* Lock whole flash */
-+	.unlock = 0x2423,	/* Unlock, two cycle command, supporting partial unlock */
-+	.lock_status = 0x007A,	/* Read block lock status */
-+	.addr2ndcb1 = Micron1GbX8Addr2NDCB1,
-+	.ndbbr2addr = Micron1GbX8NDBBR2Addr,
-+};
-+
-+static int Micron1GbX8Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p)
-+{
-+	uint32_t ndcb1 = 0;
-+	uint32_t page;
-+
-+	if (addr >= 0x8000000)
-+		return -EINVAL;
-+	page = addr / micron1GbX8.page_size;
-+	addr =  (page / micron1GbX8.page_per_block) << 18 |
-+		(page % micron1GbX8.page_per_block) << 12;
-+
-+	if (cmd == micron1GbX8.read1 || cmd == micron1GbX8.program) {
-+		ndcb1 = (addr & 0xFFF) | ((addr << 4) & 0xFFFF0000);
-+	}
-+	else if (cmd == micron1GbX8.erase) {
-+		ndcb1 = ((addr >> 18) << 6) & 0xFFFF;
-+	}
-+
-+	*p = ndcb1;
-+	return 0;
-+}
-+
-+static int Micron1GbX8NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p)
-+{
-+	if (cmd == micron1GbX8.read1 || cmd == micron1GbX8.program) {
-+		*p = ((ndbbr & 0xF) << 8) | ((ndbbr >> 8) << 16);
-+	}
-+	else if (cmd == micron1GbX8.erase) {
-+		*p = (ndbbr >> 6) << 18;
-+	}
-+
-+
-+	return 0;
-+}
-+
-+
-+static int Micron1GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p);
-+static int Micron1GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p);
-+
-+static struct dfc_flash_info micron1GbX16 =
-+{
-+	.timing = {
-+		.tCH = 10,	/* tCH, Enable signal hold time */
-+		.tCS = 25,	/* tCS, Enable signal setup time */
-+		.tWH = 15,	/* tWH, ND_nWE high duration */
-+		.tWP = 25,	/* tWP, ND_nWE pulse time */
-+		.tRH = 15,	/* tRH, ND_nRE high duration */
-+		.tRP = 25,	/* tRP, ND_nRE pulse width */
-+		/* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */
-+		.tR = 25000,
-+		/* tWHR, ND_nWE high to ND_nRE low delay for status read */
-+		.tWHR = 60,
-+		.tAR = 10,	/* tAR, ND_ALE low to ND_nRE low delay */
-+	},
-+	.enable_arbiter = 1,	/* Data flash bus arbiter enable */
-+	.page_per_block = 64,	/* Pages per block */
-+	.row_addr_start = 1,	/* Second cycle start, Row address start position */
-+	.read_id_bytes = 4,	/* Returned ID bytes */
-+	.dfc_mode = 0,		/* NAND mode */
-+	.ncsx = 0,
-+	.page_size = 2048,	/* Page size in bytes */
-+	.oob_size = 64,		/* OOB size in bytes */
-+	.flash_width = 16,	/* Width of Flash memory */
-+	.dfc_width = 16,	/* Width of flash controller */
-+	.num_blocks = 1024,	/* Number of physical blocks in Flash */
-+	.chip_id =  0xb12c,
-+
-+	/* command codes */
-+	.read1 = 0x3000,	/* Read */
-+	.read2 = 0x0050,	/* Read1 unused, current DFC don't support */
-+	.program = 0x1080,	/* Write, two cycle command */
-+	.read_status = 0x0070,	/* Read status */
-+	.read_id = 0x0090,	/* Read ID */
-+	.erase =  0xD060,	/* Erase, two cycle command */
-+	.reset = 0x00FF,	/* Reset */
-+	.lock = 0x002A,		/* Lock whole flash */
-+	.unlock = 0x2423,	/* Unlock, two cycle command, supporting partial unlock */
-+	.lock_status = 0x007A,	/* Read block lock status */
-+	.addr2ndcb1 = Micron1GbX16Addr2NDCB1,
-+	.ndbbr2addr = Micron1GbX16NDBBR2Addr,
-+};
-+
-+static int Micron1GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p)
-+{
-+	uint32_t ndcb1 = 0;
-+	uint32_t page;
-+
-+	if (addr >= 0x8000000)
-+		return -EINVAL;
-+	page = addr / micron1GbX16.page_size;
-+	addr =  (page / micron1GbX16.page_per_block) << 17 |
-+		(page % micron1GbX16.page_per_block) << 11;
-+
-+	if (cmd == micron1GbX16.read1 || cmd == micron1GbX16.program) {
-+		ndcb1 = (addr & 0x7FF) | ((addr << 5) & 0xFFFF0000);
-+	}
-+	else if (cmd == micron1GbX16.erase) {
-+		ndcb1 = ((addr >> 17) << 6) & 0xFFFF;
-+	}
-+	*p = ndcb1;
-+	return 0;
-+}
-+
-+static int Micron1GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p)
-+{
-+	if (cmd == micron1GbX16.read1 || cmd == micron1GbX16.program) {
-+		*p = ((ndbbr & 0x7) << 8) | ((ndbbr >> 8) << 16);
-+	}
-+	else if (cmd == micron1GbX16.erase) {
-+		*p = (ndbbr >> 6) << 17;
-+	}
-+
-+	return 0;
-+}
-+
-+static int STM1GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p);
-+static int STM1GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p);
-+
-+static struct dfc_flash_info stm1GbX16 =
-+{
-+	.timing = {
-+		.tCH = 10,	/* tCH, Enable signal hold time */
-+		.tCS = 10,	/* tCS, Enable signal setup time */
-+		.tWH = 20,	/* tWH, ND_nWE high duration */
-+		.tWP = 25,	/* tWP, ND_nWE pulse time */
-+		.tRH = 20,	/* tRH, ND_nRE high duration */
-+		.tRP = 25,	/* tRP, ND_nRE pulse width */
-+		/* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */
-+		.tR = 25000,
-+		/* tWHR, ND_nWE high to ND_nRE low delay for status read */
-+		.tWHR = 60,
-+		.tAR = 10,	/* tAR, ND_ALE low to ND_nRE low delay */
-+	},
-+	.enable_arbiter = 1,	/* Data flash bus arbiter enable */
-+	.page_per_block = 64,	/* Pages per block */
-+	.row_addr_start = 1,	/* Second cycle start, Row address start position */
-+	.read_id_bytes = 4,	/* Returned ID bytes */
-+	.dfc_mode = 0,		/* NAND mode */
-+	.ncsx = 0,
-+	.page_size = 2048,	/* Page size in bytes */
-+	.oob_size = 64,		/* OOB size in bytes */
-+	.flash_width = 16,	/* Width of Flash memory */
-+	.dfc_width = 16,	/* Width of flash controller */
-+	.num_blocks = 1024,	/* Number of physical blocks in Flash */
-+	.chip_id =  0xb120,
-+
-+	/* command codes */
-+	.read1 = 0x3000,	/* Read */
-+	.read2 = 0x0050,	/* Read1 unused, current DFC don't support */
-+	.program = 0x1080,	/* Write, two cycle command */
-+	.read_status = 0x0070,	/* Read status */
-+	.read_id = 0x0090,	/* Read ID */
-+	.erase =  0xD060,	/* Erase, two cycle command */
-+	.reset = 0x00FF,	/* Reset */
-+	.lock = 0x002A,		/* Lock whole flash */
-+	.unlock = 0x2423,	/* Unlock, two cycle command, supporting partial unlock */
-+	.lock_status = 0x007A,	/* Read block lock status */
-+	.addr2ndcb1 = STM1GbX16Addr2NDCB1,
-+	.ndbbr2addr = STM1GbX16NDBBR2Addr,
-+};
-+
-+static int STM1GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p)
-+{
-+	uint32_t ndcb1 = 0;
-+	uint32_t page;
-+
-+	if (addr >= 0x8000000)
-+		return -EINVAL;
-+	page = addr / stm1GbX16.page_size;
-+	addr =  (page / stm1GbX16.page_per_block) << 17 |
-+		(page % stm1GbX16.page_per_block) << 11;
-+
-+	if (cmd == stm1GbX16.read1 || cmd == stm1GbX16.program) {
-+		ndcb1 = (addr & 0x7FF) | ((addr << 5) & 0xFFFF0000);
-+	}
-+	else if (cmd == stm1GbX16.erase) {
-+		ndcb1 = ((addr >> 17) << 6) & 0xFFFF;
-+	}
-+	*p = ndcb1;
-+	return 0;
-+}
-+
-+static int STM1GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p)
-+{
-+	if (cmd == stm1GbX16.read1 || cmd == stm1GbX16.program) {
-+		*p = ((ndbbr & 0x7) << 8) | ((ndbbr >> 8) << 16);
-+	}
-+	else if (cmd == stm1GbX16.erase) {
-+		*p = (ndbbr >> 6) << 17;
-+	}
-+
-+	return 0;
-+}
-+
-+static int STM2GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p);
-+static int STM2GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p);
-+
-+static struct dfc_flash_info stm2GbX16 =
-+{
-+	.timing = {
-+		.tCH = 10,      /* tCH, Enable signal hold time */
-+		.tCS = 10,      /* tCS, Enable signal setup time */
-+		.tWH = 20,      /* tWH, ND_nWE high duration */
-+		.tWP = 25,      /* tWP, ND_nWE pulse time */
-+		.tRH = 20,      /* tRH, ND_nRE high duration */
-+		.tRP = 25,      /* tRP, ND_nRE pulse width */
-+		/* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */
-+		.tR = 25000,
-+		/* tWHR, ND_nWE high to ND_nRE low delay for status read */
-+		.tWHR = 60,
-+		.tAR = 10,      /* tAR, ND_ALE low to ND_nRE low delay */
-+	},
-+	.enable_arbiter = 1,    /* Data flash bus arbiter enable */
-+	.page_per_block = 64,   /* Pages per block */
-+	.row_addr_start = 1,	/* Second cycle start, Row address start position */
-+	.read_id_bytes = 4,     /* Returned ID bytes */
-+	.dfc_mode = 0,          /* NAND mode */
-+	.ncsx = 0,
-+	.page_size = 2048,      /* Page size in bytes */
-+	.oob_size = 64,         /* OOB size in bytes */
-+	.flash_width = 16,      /* Width of Flash memory */
-+	.dfc_width = 16,        /* Width of flash controller */
-+	.num_blocks = 2048,     /* Number of physical blocks in Flash */
-+	.chip_id =  0xca20,
-+
-+	/* command codes */
-+	.read1 = 0x3000,        /* Read */
-+	.read2 = 0x0050,        /* Read1 unused, current DFC don't support */
-+	.program = 0x1080,      /* Write, two cycle command */
-+	.read_status = 0x0070,  /* Read status */
-+	.read_id = 0x0090,      /* Read ID */
-+	.erase =  0xD060,       /* Erase, two cycle command */
-+	.reset = 0x00FF,        /* Reset */
-+	.lock = 0x002A,         /* Lock whole flash */
-+	.unlock = 0x2423,	/* Unlock, two cycle command, supporting partial unlock */
-+	.lock_status = 0x007A,  /* Read block lock status */
-+	.addr2ndcb1 = STM2GbX16Addr2NDCB1,
-+	.ndbbr2addr = STM2GbX16NDBBR2Addr,
-+};
-+
-+static int STM2GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p)
-+{
-+	uint32_t ndcb1 = 0;
-+	uint32_t page;
-+
-+	if (addr >= 0x8000000)
-+		return -EINVAL;
-+	page = addr / stm2GbX16.page_size;
-+	addr =  (page / stm2GbX16.page_per_block) << 17 |
-+		(page % stm2GbX16.page_per_block) << 11;
-+
-+	if (cmd == stm2GbX16.read1 || cmd == stm2GbX16.program) {
-+		ndcb1 = (addr & 0x7FF) | ((addr << 5) & 0xFFFF0000);
-+	}
-+	else if (cmd == stm2GbX16.erase) {
-+		ndcb1 = ((addr >> 17) << 6) & 0xFFFF;
-+	}
-+	*p = ndcb1;
-+	return 0;
-+}
-+
-+static int STM2GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p)
-+{
-+	if (cmd == stm2GbX16.read1 || cmd == stm2GbX16.program) {
-+		*p = ((ndbbr & 0x7) << 8) | ((ndbbr >> 8) << 16);
-+	}
-+	else if (cmd == stm2GbX16.erase) {
-+		*p = (ndbbr >> 6) << 17;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct {
-+	int type;
-+	struct dfc_flash_info *flash_info;
-+} type_info[] = {
-+	{ DFC_FLASH_Samsung_512Mb_X_16, &samsung512MbX16},
-+	{ DFC_FLASH_Micron_1Gb_X_8, &micron1GbX8},
-+	{ DFC_FLASH_Micron_1Gb_X_16, &micron1GbX16},
-+	{ DFC_FLASH_STM_1Gb_X_16, &stm1GbX16},
-+	{ DFC_FLASH_STM_2Gb_X_16, &stm2GbX16},
-+	{ DFC_FLASH_NULL, NULL},
-+};
-+
-+int dfc_get_flash_info(int type, struct dfc_flash_info **flash_info)
-+{
-+	uint32_t i = 0;
-+
-+	while(type_info[i].type != DFC_FLASH_NULL) {
-+		if (type_info[i].type == type) {
-+			*flash_info = type_info[i].flash_info;
-+			return 0;
-+		}
-+		i++;
-+	}
-+	*flash_info = NULL;
-+	return -EINVAL;
-+}
-+
-+/******************************************************************************
-+  dfc_set_timing
-+
-+  Description:
-+	This function sets flash timing property in DFC timing register
-+	according to input timing value embodied in context structure.
-+	It is called once during the hardware initialization.
-+  Input Parameters:
-+  Output Parameters:
-+	None
-+  Returns:
-+	None
-+*******************************************************************************/
-+//#if defined(CONFIG_CPU_MONAHANS_L) || defined(CONFIG_CPU_MONAHANS_LV)
-+#define DFC_CLOCK	208
-+//#else
-+//#define DFC_CLOCK	104
-+//#endif
-+#define CLOCK_NS	DFC_CLOCK/1000
-+
-+void dfc_set_timing(struct dfc_context *context, struct dfc_flash_timing *t)
-+{
-+	struct dfc_flash_timing timing = *t;
-+
-+	uint32_t  r0 = 0;
-+	uint32_t  r1 = 0;
-+
-+	/*
-+   	 * num of clock cycles = time (ns) / one clock sycle (ns) + 1
-+   	 * - integer division will truncate the result, so add a 1 in all cases
-+   	 * - subtract the extra 1 cycle added to all register timing values
-+   	 */
-+   	timing.tCH = min(((int) (timing.tCH * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tCH);
-+   	timing.tCS = min(((int) (timing.tCS * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tCS);
-+   	timing.tWH = min(((int) (timing.tWH * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tWH);
-+   	timing.tWP = min(((int) (timing.tWP * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tWP);
-+   	timing.tRH = min(((int) (timing.tRH * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tRH);
-+   	timing.tRP = min(((int) (timing.tRP * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tRP);
-+
-+   	r0 = (timing.tCH << DFC_TIMING_tCH) |
-+   	     (timing.tCS << DFC_TIMING_tCS) |
-+   	     (timing.tWH << DFC_TIMING_tWH) |
-+   	     (timing.tWP << DFC_TIMING_tWP) |
-+   	     (timing.tRH << DFC_TIMING_tRH) |
-+   	     (timing.tRP << DFC_TIMING_tRP);
-+
-+	dfc_write(context, DFC_NDTR0CS0, r0);
-+
-+   	timing.tR   = min(((int) (timing.tR   * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tR);
-+   	timing.tWHR = min(((int) (timing.tWHR * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tWHR);
-+   	timing.tAR  = min(((int) (timing.tAR  * CLOCK_NS) + 1),
-+   			DFC_TIMING_MAX_tAR);
-+
-+   	r1 = (timing.tR   << DFC_TIMING_tR)   |
-+   	     (timing.tWHR << DFC_TIMING_tWHR) |
-+   	     (timing.tAR  << DFC_TIMING_tAR);
-+
-+	dfc_write(context, DFC_NDTR1CS0, r1);
-+   	return;
-+}
-+
-+/******************************************************************************
-+  dfc_set_dma
-+
-+  Description:
-+		Enables or Disables DMA in line with setting in DFC mode of context
-+		structure. DMA mode of DFC. Performs a read-modify-write operation that
-+		only changes the driven DMA_EN bit field In DMA mode, all commands and
-+		data are transferred by DMA.  DMA can be enable/disable on the fly.
-+  Input Parameters:
-+	context -Pointer to DFC context structure
-+  	Output Parameters:
-+		None
-+	Returns:
-+		None
-+*******************************************************************************/
-+void
-+dfc_set_dma(struct dfc_context* context)
-+{
-+	uint32_t ndcr;
-+
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	if (context->dfc_mode->enable_dma)
-+		ndcr |= NDCR_DMA_EN;
-+	else
-+		ndcr &= ~NDCR_DMA_EN;
-+
-+	dfc_write(context, DFC_NDCR, ndcr);
-+
-+	/* Read again to make sure write work */
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	return;
-+}
-+
-+
-+/******************************************************************************
-+  dfc_set_ecc
-+
-+  Description:
-+		This function enables or disables hardware ECC capability of DFC in line
-+		with setting in DFC mode of context structure.
-+  Input Parameters:
-+	context -Pointer to DFC context structure
-+	Output Parameters:
-+		None
-+	Returns:
-+		None
-+*******************************************************************************/
-+void
-+dfc_set_ecc(struct dfc_context* context)
-+{
-+	uint32_t ndcr;
-+
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	if (context->dfc_mode->enable_ecc)
-+		ndcr |= NDCR_ECC_EN;
-+	else
-+		ndcr &= ~NDCR_ECC_EN;
-+
-+	dfc_write(context, DFC_NDCR, ndcr);
-+
-+	/* Read again to make sure write work */
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	return;
-+}
-+
-+/******************************************************************************
-+  dfc_set_spare
-+
-+  Description:
-+		This function enables or disables accesses to spare area of NAND Flash
-+		through DFC in line with setting in DFC mode of context structure.
-+  Input Parameters:
-+	context -Pointer to DFC context structure
-+  Output Parameters:
-+	None
-+  Returns:
-+	None
-+*******************************************************************************/
-+void
-+dfc_set_spare(struct dfc_context* context)
-+{
-+	uint32_t ndcr;
-+
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	if (context->dfc_mode->enable_spare)
-+		ndcr |= NDCR_SPARE_EN;
-+	else
-+		ndcr &= ~NDCR_SPARE_EN;
-+
-+	dfc_write(context, DFC_NDCR, ndcr);
-+
-+	/* Read again to make sure write work */
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	return;
-+}
-+
-+static unsigned int get_delta (unsigned int start)
-+{
-+    unsigned int stop = OSCR;
-+    return (stop - start);
-+}
-+
-+static int dfc_wait_event(struct dfc_context *context, uint32_t event,
-+		uint32_t *event_out, uint32_t timeout, int enable_int)
-+{
-+	uint32_t ndsr;
-+	uint32_t to = 3 * timeout;	/* 3 ticks ~ 1us */
-+	int status;
-+	int start = OSCR;
-+
-+	if (enable_int)
-+		dfc_enable_int(context, event);
-+
-+	while (1) {
-+		ndsr = dfc_read(context, DFC_NDSR);
-+		ndsr &= NDSR_MASK;
-+		if (ndsr & event) {
-+			/* event happened */
-+			*event_out = ndsr & event;
-+			dfc_clear_int(context, *event_out);
-+			status = 0;
-+			break;
-+		} else if (get_delta(start) > to) {
-+			status = -ETIME;
-+			break;
-+		}
-+	}
-+
-+	if (enable_int)
-+		dfc_disable_int(context, event);
-+	return status;
-+}
-+
-+/******************************************************************************
-+  dfc_get_pattern
-+
-+  Description:
-+	This function is used to retrieve buffer size setting for a transaction
-+	based on cmd.
-+  Input Parameters:
-+	context - Pointer to DFC context structure
-+	cmd
-+	  Specifies type of command to be sent to NAND flash .The LSB of this
-+	  parameter defines the first command code for 2-cycles command. The
-+	  MSB defines the second command code for 2-cycles command. If MSB is
-+	  set to zero, this indicates that one cycle command
-+	Output Parameters:
-+	data_size
-+	  It is used to retrieve  length of data transferred to/from DFC,
-+	  which includes padding bytes
-+	padding
-+	  It is used to retrieve how many padding bytes there should be
-+	  in buffer of data_size.
-+	Returns:
-+	0
-+	  If size setting is returned successfully
-+	-EINVAL
-+	  If page size specified in flash spec of context structure is not 512 or
-+	  2048;If specified command index is not read1/program/erase/reset/readID/
-+	  readStatus.
-+*******************************************************************************/
-+int dfc_get_pattern(struct dfc_context *context, uint16_t cmd,
-+			int *data_size, int *padding)
-+{
-+	struct dfc_mode* dfc_mode = context->dfc_mode;
-+	struct dfc_flash_info * flash_info = context->flash_info;
-+	uint32_t page_size = context->flash_info->page_size; /* 512 or 2048 */
-+
-+	if (cmd == flash_info->read1 ||
-+		cmd == flash_info->program) {
-+		if (512 == page_size) {
-+			/* add for DMA */
-+			if (dfc_mode->enable_dma) {
-+				*data_size = DFC_DATA_SIZE_544;
-+				if (dfc_mode->enable_ecc)
-+					*padding = DFC_PADDING_SIZE_24;
-+				else
-+					*padding = DFC_PADDING_SIZE_16;
-+			} else if (!dfc_mode->enable_spare) {
-+				*data_size = DFC_DATA_SIZE_512;
-+				*padding = DFC_PADDING_SIZE_0;
-+			} else {
-+
-+				if (dfc_mode->enable_ecc)
-+					*data_size = DFC_DATA_SIZE_520;
-+				else
-+					*data_size = DFC_DATA_SIZE_528;
-+
-+				*padding = DFC_PADDING_SIZE_0;
-+			}
-+		} else if (2048 == page_size) {
-+			/* add for DMA */
-+			if (dfc_mode->enable_dma) {
-+				*data_size = DFC_DATA_SIZE_2112;
-+				if (dfc_mode->enable_ecc)
-+					*padding = DFC_PADDING_SIZE_24;
-+				else
-+					*padding = DFC_PADDING_SIZE_0;
-+			} else if (!dfc_mode->enable_spare) {
-+				*data_size = DFC_DATA_SIZE_2048;
-+				*padding = DFC_PADDING_SIZE_0;
-+			} else {
-+
-+				if (dfc_mode->enable_ecc)
-+					*data_size = DFC_DATA_SIZE_2088;
-+				else
-+					*data_size = DFC_DATA_SIZE_2112;
-+
-+				*padding = DFC_PADDING_SIZE_0;
-+			}
-+		} else /* if the page_size is neither 512 or 2048 */
-+			return -EINVAL;
-+	} else if (cmd == flash_info->read_id) {
-+		*data_size = DFC_DATA_SIZE_ID;
-+		*padding = DFC_PADDING_SIZE_0;
-+	} else if(cmd == flash_info->read_status) {
-+		*data_size = DFC_DATA_SIZE_STATUS;
-+		*padding = DFC_PADDING_SIZE_0;
-+	} else if (cmd == flash_info->erase || cmd == flash_info->reset) {
-+		*data_size = DFC_DATA_SIZE_UNUSED;
-+		*padding = DFC_PADDING_SIZE_UNUSED;
-+	} else
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+
-+/******************************************************************************
-+  dfc_send_cmd
-+
-+  Description:
-+	This function configures DFC to send command through DFC to NAND flash
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+	cmd
-+	  Specifies type of command to be sent to NAND flash .The LSB of this
-+	  parameter defines the first command code for 2-cycles command. The
-+	  MSB defines the second command code for 2-cycles command. If MSB is
-+	  set to zero, this indicates that one cycle command
-+	addr
-+	  Address sent out to the flash device withthis command. For page read/
-+	  program commands , 4-cycles address is sent. For erase command only
-+	  3-cycles address is sent. If it is equal to 0xFFFFFFFF, the address
-+	  should not be used.
-+	num_pages
-+	  It specifies the number of pages of data to be transferred for
-+	  a program or read commands. Unused for any other commands than
-+	  read/program.
-+
-+  Output Parameters:
-+	None
-+  Returns:
-+	0
-+	  If size setting is returned successfully
-+	-EINVAL
-+	  If specified command index is not read1/program/erase/reset/readID/
-+	  readStatus.
-+*******************************************************************************/
-+int dfc_send_cmd(struct dfc_context *context, uint16_t cmd,
-+			uint32_t addr, int num_pages)
-+{
-+	struct dfc_flash_info *flash_info = context->flash_info;
-+	struct dfc_mode *dfc_mode = context->dfc_mode;
-+	uint8_t  cmd2;
-+	uint32_t event_out;
-+	uint32_t ndcb0=0, ndcb1=0, ndcb2=0, ndcr;
-+	int status;
-+
-+	/* It is a must to set ND_RUN firstly, then write command buffer
-+	 * If conversely,it does not work
-+	 */
-+	dfc_write(context, DFC_NDSR, NDSR_MASK);
-+
-+	/* Set ND_RUN */
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	dfc_write(context, DFC_NDCR, (ndcr | NDCR_ND_RUN));
-+
-+	// Wait for write command request
-+	status = dfc_wait_event(context, NDSR_WRCMDREQ,
-+		&event_out, NAND_CMD_TIMEOUT, 0);
-+
-+	if (status) /* Timeout */
-+		return status;
-+
-+	cmd2 = (cmd>>8) & 0xFF;
-+	ndcb0 = cmd | (dfc_mode->chip_select<<24) | ((cmd2?1:0)<<19);
-+
-+	if (cmd == flash_info->read1) {
-+		if (0xFFFFFFFF != addr) {
-+			ndcb0 |= NDCB0_ADDR_CYC(4);
-+			status = flash_info->addr2ndcb1(cmd, addr, &ndcb1);
-+			if (status)
-+				return status;
-+			ndcb2 = (num_pages - 1) << 8;
-+		}
-+	} else if (cmd == flash_info->program) {
-+		ndcb0 |= NDCB0_CMD_TYPE(1) | NDCB0_AUTO_RS;
-+		ndcb0 |= NDCB0_ADDR_CYC(4);
-+		status = flash_info->addr2ndcb1(cmd, addr, &ndcb1);
-+		if (status)
-+			return status;
-+		ndcb2 = (num_pages-1) << 8;
-+	} else if (cmd == flash_info->erase) {
-+		ndcb0 |= NDCB0_CMD_TYPE(2) | NDCB0_AUTO_RS;
-+		ndcb0 |= NDCB0_ADDR_CYC(3);
-+		status = flash_info->addr2ndcb1(cmd, addr, &ndcb1);
-+		if (status)
-+			return status;
-+	} else if (cmd == flash_info->read_id) {
-+		ndcb0 |= NDCB0_CMD_TYPE(3);
-+	} else if(cmd == flash_info->read_status) {
-+		ndcb0 |= NDCB0_CMD_TYPE(4);
-+	} else if(cmd == flash_info->reset) {
-+		ndcb0 |= NDCB0_CMD_TYPE(5);
-+	} else if (cmd == flash_info->lock) {
-+		ndcb0 |= NDCB0_CMD_TYPE(5);
-+	} else
-+		return -EINVAL;
-+
-+	/* Write to DFC command register */
-+	dfc_write(context, DFC_NDCB0, ndcb0);
-+	dfc_write(context, DFC_NDCB0, ndcb1);
-+	dfc_write(context, DFC_NDCB0, ndcb2);
-+
-+	return 0;
-+}
-+
-+/******************************************************************************
-+  dfc_stop
-+
-+  Description:
-+	This function clears ND_RUN bit of NDCR.
-+  Input Parameters:
-+	context--Pointer to DFC context structure
-+  Output Parameters:
-+	None
-+  Returns:
-+	None
-+*******************************************************************************/
-+void dfc_stop(struct dfc_context *context)
-+{
-+	unsigned int ndcr;
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	dfc_write(context, DFC_NDCR, (ndcr & ~NDCR_ND_RUN));
-+	ndcr = dfc_read(context, DFC_NDCR);
-+
-+	return;
-+}
-+
-+int dfc_setup_cmd_dma(struct dfc_context *context,
-+		uint16_t cmd, uint32_t addr, int num_pages,
-+		uint32_t *buf, uint32_t buf_phys,
-+		uint32_t next_desc_phys, uint32_t dma_int_en,
-+		struct pxa_dma_desc *dma_desc)
-+{
-+	struct dfc_flash_info *flash_info = context->flash_info;
-+	struct dfc_mode *dfc_mode = context->dfc_mode;
-+	uint8_t  cmd2;
-+	uint32_t event_out;
-+	uint32_t ndcb0=0, ndcb1=0, ndcb2=0, ndcr;
-+	int status;
-+
-+	/*
-+	 * It is a must to set ND_RUN firstly, then write command buffer
-+	 * If conversely,it does not work
-+	 */
-+	dfc_write(context, DFC_NDSR, NDSR_MASK);
-+
-+	/* Set ND_RUN */
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	ndcr |= NDCR_ND_RUN;
-+	dfc_write(context, DFC_NDCR, ndcr);
-+
-+	/* Wait for write command request */
-+	status = dfc_wait_event(context, NDSR_WRCMDREQ,
-+		&event_out, NAND_CMD_TIMEOUT, 0);
-+
-+	if (status)
-+		return status; /* Timeout */
-+
-+	cmd2 = (cmd>>8) & 0xFF;
-+	ndcb0 = cmd | (dfc_mode->chip_select<<24) | ((cmd2?1:0)<<19);
-+
-+	if (cmd == flash_info->read1) {
-+		if (0xFFFFFFFF != addr) {
-+			ndcb0 |= NDCB0_ADDR_CYC(4);
-+			status = flash_info->addr2ndcb1(cmd, addr, &ndcb1);
-+			if (status)
-+				return status;
-+			ndcb2 = (num_pages-1) << 8;
-+		}
-+	} else if (cmd == flash_info->program) {
-+		ndcb0 |= NDCB0_CMD_TYPE(1) | NDCB0_AUTO_RS;
-+		ndcb0 |= NDCB0_ADDR_CYC(4);
-+
-+		status = flash_info->addr2ndcb1(cmd, addr, &ndcb1);
-+		if (status)
-+			return status;
-+		ndcb2 = (num_pages-1) << 8;
-+	} else if (cmd == flash_info->erase) {
-+		ndcb0 |= NDCB0_CMD_TYPE(2) | NDCB0_AUTO_RS;
-+		ndcb0 |= NDCB0_ADDR_CYC(3);
-+
-+		status = flash_info->addr2ndcb1(cmd, addr, &ndcb1);
-+		if (status)
-+			return status;
-+	} else if (cmd == flash_info->read_id) {
-+		ndcb0 |= NDCB0_CMD_TYPE(3);
-+	} else if (cmd == flash_info->read_status) {
-+		ndcb0 |= NDCB0_CMD_TYPE(4);
-+	} else if (cmd == flash_info->reset) {
-+		ndcb0 |= NDCB0_CMD_TYPE(5);
-+	} else if (cmd == flash_info->lock) {
-+		ndcb0 |= NDCB0_CMD_TYPE(5);
-+	} else
-+		return -EINVAL;
-+
-+	*((uint32_t *)buf) = ndcb0;
-+	*((uint32_t *)buf + 1) = ndcb1;
-+	*((uint32_t *)buf + 2) = ndcb2;
-+
-+	dma_int_en &= (DCMD_STARTIRQEN | DCMD_ENDIRQEN);
-+
-+	dma_desc->ddadr = next_desc_phys;
-+	dma_desc->dsadr = buf_phys;
-+	dma_desc->dtadr = NDCB0_DMA_ADDR;
-+	dma_desc->dcmd  = DCMD_INCSRCADDR | DCMD_FLOWTRG | dma_int_en |
-+			  DCMD_WIDTH4 | DCMD_BURST16 | 12;
-+	return 0;
-+}
-+
-+int dfc_setup_data_dma(struct dfc_context* context,
-+		uint16_t cmd, uint32_t buf_phys,
-+		uint32_t next_desc_phys, uint32_t dma_int_en,
-+		struct pxa_dma_desc* dma_desc)
-+{
-+	struct dfc_flash_info * flash_info = context->flash_info;
-+	int data_size, padding;
-+
-+	dfc_get_pattern(context, cmd, &data_size, &padding);
-+
-+	dma_desc->ddadr = next_desc_phys;
-+	dma_int_en &= (DCMD_STARTIRQEN | DCMD_ENDIRQEN);
-+
-+	if (cmd == flash_info->program) {
-+
-+		dma_desc->dsadr = buf_phys;
-+		dma_desc->dtadr = NDDB_DMA_ADDR;
-+		dma_desc->dcmd  = DCMD_INCSRCADDR | DCMD_FLOWTRG | dma_int_en |
-+				  DCMD_WIDTH4 | DCMD_BURST32 | data_size;
-+
-+	} else if (cmd == flash_info->read1 || cmd == flash_info->read_id ||
-+		   cmd == flash_info->read_status) {
-+
-+		dma_desc->dsadr = NDDB_DMA_ADDR;
-+		dma_desc->dtadr = buf_phys;
-+		dma_desc->dcmd  = DCMD_INCTRGADDR | DCMD_FLOWSRC | dma_int_en |
-+				  DCMD_WIDTH4 | DCMD_BURST32 | data_size;
-+	}
-+	else
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+void dfc_start_cmd_dma(struct dfc_context* context, struct pxa_dma_desc* dma_desc)
-+{
-+	DRCMR99 = DRCMR_MAPVLD | context->cmd_dma_ch;	/* NAND CMD DRCMR */
-+	DDADR(context->cmd_dma_ch) = (uint32_t)dma_desc;
-+	DCSR(context->cmd_dma_ch) |= DCSR_RUN;
-+}
-+
-+void dfc_start_data_dma(struct dfc_context* context, struct pxa_dma_desc* dma_desc)
-+{
-+	DRCMR97 = DRCMR_MAPVLD | context->data_dma_ch;
-+	DDADR(context->data_dma_ch) = (uint32_t)dma_desc;
-+	DCSR(context->data_dma_ch) |= DCSR_RUN;
-+}
-+
-+/******************************************************************************
-+  dfc_read_fifo_partial
-+
-+  Description:
-+	This function reads data from data buffer of DFC.Bytes can be any less than
-+	or equal to data_size, the left is ignored by ReadFIFO though they will be
-+	read from NDDB to clear data buffer.
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+	nbytes
-+	  Indicating how much data should be read into buffer.
-+	data_size
-+	  Specifing length of data transferred to/from DFC, which includes
-+	  padding bytes
-+  Output Parameters:
-+	pBuffer
-+	  Pointer to the data buffer where data should be placed.
-+	Returns:
-+	  None
-+*******************************************************************************/
-+void dfc_read_fifo_partial(struct dfc_context *context, uint8_t *buffer,
-+		int nbytes, int data_size)
-+{
-+	uint32_t data = 0;
-+	uint32_t i = 0;
-+	uint32_t bytes_multi;
-+	uint32_t bytes_remain;
-+
-+
-+	if (1 == data_size) {
-+		data = dfc_read(context, DFC_NDDB) & 0xFF;
-+		*buffer++ = (uint8_t)data;
-+	} else if (2 == data_size) {
-+		data = dfc_read(context, DFC_NDDB) & 0xFFFF;
-+		*buffer++ = data & 0xFF;
-+		*buffer++ = (data >> 8) & 0xFF;
-+	} else {
-+		bytes_multi = (nbytes & 0xFFFFFFFC);
-+		bytes_remain = nbytes & 0x03;
-+
-+		i = 0;
-+		/* Read the bytes_multi*4 bytes data */
-+		while (i < bytes_multi) {
-+			data = dfc_read(context, DFC_NDDB);
-+			/* FIXME: we don't know whether the buffer
-+			 * align to 4 bytes or not. Cast the buffer
-+			 * to int is not safe here. Especially under
-+			 * gcc 4.x. Used memcpy here. But the memcpy
-+			 * may be not correct on BE architecture.
-+			 * --by Yin, Fengwei
-+			 */
-+			memcpy(buffer, &data, sizeof(data));
-+			i += sizeof(data);
-+			buffer += sizeof(data);
-+		}
-+
-+		/* Read the left bytes_remain bytes data */
-+		if (bytes_remain) {
-+			data = dfc_read(context, DFC_NDDB);
-+			for (i = 0; i < bytes_remain; i++)
-+				*buffer++ = (uint8_t)((data >> (8*i)) & 0xFF);
-+		}
-+
-+		/* When read the remain bytes, we always read 4 bytes data
-+		 * to DFC. So the data_size should subtract following number.
-+		 */
-+		data_size -= bytes_multi + (bytes_remain ? sizeof(data) : 0);
-+
-+		/* We need Read data_size bytes data totally */
-+		while (data_size > 0) {
-+			data = dfc_read(context, DFC_NDDB);
-+			data_size -= sizeof(data);
-+		}
-+
-+/*
-+		while(i < ((uint32_t)data_size) ) {
-+			if (i < bytes_multi) {
-+				temp = (uint32_t *)buffer;
-+				*temp = dfc_reg->nddb;
-+			} else if (i == bytes_multi && bytes_remain){
-+				uint32_t j = 0;
-+				data = dfc_reg->nddb;
-+				while (j++ < bytes_remain) {
-+					*buffer++ = (uint8_t)	\
-+						((data>>(8*j)) & 0xFF);
-+				}
-+			} else {
-+				data = dfc_reg->nddb;
-+			}
-+			i += 4;
-+			buffer += 4;
-+		}
-+*/
-+	}
-+	return;
-+}
-+
-+/******************************************************************************
-+  dfc_write_fifo_partial
-+
-+  Description:
-+	Write to data buffer of DFC from a buffer. Bytes can be same as
-+	data_size, also can be data_size-padding, but can¡¯t be random value,
-+	the left will be automatically padded by WriteFIFO.
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+	bytes
-+	  Indicating how much data should be read into buffer.
-+	data_size
-+	  Specifing length of data transferred to/from DFC, which includes
-+	  padding bytes
-+	buffer
-+	  Pointer to the data buffer where data will be taken from to be written
-+	  to DFC data buffer
-+  Output Parameters:
-+	None
-+  Returns:
-+	None
-+*******************************************************************************/
-+void dfc_write_fifo_partial(struct dfc_context *context, uint8_t *buffer,
-+		int nbytes, int data_size)
-+{
-+	uint32_t i = 0;
-+
-+	uint32_t bytes_multi = (nbytes & 0xFFFFFFFC);
-+	uint32_t bytes_remain = nbytes & 0x03;
-+	uint32_t temp;
-+	/*
-+	 * caller guarantee buffer contains appropriate data thereby
-+	 * it is impossible for nbytes not to be a multiple of 4 byte
-+	 */
-+
-+	/* Write the bytes_multi*4 bytes data */
-+	while (i < bytes_multi) {
-+		temp = buffer[0] | buffer[1] << 8 |
-+				buffer[2] << 16 | buffer[3] << 24;
-+		dfc_write(context, DFC_NDDB, temp);
-+		buffer += 4;
-+		i += 4;
-+	}
-+
-+	/* Write the left bytes_remain bytes data */
-+	if (bytes_remain) {
-+		temp = 0xFFFFFFFF;
-+		for (i = 0; i < bytes_remain; i++)
-+			temp &= *buffer++ << i*8;
-+
-+		dfc_write(context, DFC_NDDB, temp);
-+	}
-+
-+	/* When write the remain bytes, we always write 4 bytes data
-+	 * to DFC. So the data_size should subtract following number.
-+	 */
-+	data_size -= bytes_multi + (bytes_remain ? sizeof(temp) : 0);
-+
-+	while (data_size > 0) {
-+		dfc_write(context, DFC_NDDB, 0xFFFFFFFF);
-+		data_size -= 4;
-+	}
-+
-+/*
-+	while (i < ((uint32_t)data_size)) {
-+		if (i < bytes_multi) {
-+			temp = (uint32_t *)buffer;
-+			dfc_reg->nddb = *temp;
-+		}
-+		else if (i == bytes_multi && bytes_remain) {
-+				uint32_t j = 0, data = 0xFFFFFFFF;
-+				while (j < bytes_remain) {
-+				  data &= (uint8_t)(*buffer) << j;
-+				  buffer++;
-+				  j++;
-+				}
-+			dfc_reg->nddb = data;
-+		}
-+		else {
-+			dfc_reg->nddb = 0xFFFFFFFF;
-+		}
-+		i += 4;
-+		buffer += 4;
-+	}
-+*/
-+
-+	return;
-+}
-+
-+/******************************************************************************
-+  dfc_read_fifo
-+  Description:
-+	This function reads data from data buffer of DFC.Bytes can be any less
-+	than or equal to data_size, the left is ignored by ReadFIFO though they
-+	will be read from NDDB to clear data buffer.
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+	nbytes
-+	  Indicating how much data should be read into buffer.
-+	data_size
-+	  Specifing length of data transferred to/from DFC, which includes
-+	  padding bytes
-+  Output Parameters:
-+	buffer
-+	  Pointer to the data buffer where data should be placed.
-+  Returns:
-+	None
-+*******************************************************************************/
-+
-+void dfc_read_fifo(struct dfc_context *context, uint8_t *buffer, int nbytes)
-+{
-+	uint32_t i = 0;
-+
-+	uint32_t bytes_multi = (nbytes & 0xFFFFFFFC);
-+	uint32_t bytes_remain = nbytes & 0x03;
-+	uint32_t temp;
-+
-+	/* Read the bytes_multi*4 bytes data */
-+	while (i < bytes_multi) {
-+		temp = dfc_read(context, DFC_NDDB);
-+		/* FIXME: we don't know whether the buffer
-+		 * align to 4 bytes or not. Cast the buffer
-+		 * to int is not safe here. Especially under
-+		 * gcc 4.x. Used memcpy here. But the memcpy
-+		 * may be not correct on BE architecture.
-+		 * --by Yin, Fengwei
-+		 */
-+		memcpy(buffer, &temp, sizeof(temp));
-+		i += sizeof(temp);
-+		buffer += sizeof(temp);
-+	}
-+
-+	/* Read the left bytes_remain bytes data */
-+	temp = dfc_read(context, DFC_NDDB);
-+	for (i = 0; i < bytes_remain; i++) {
-+		*buffer++ = (uint8_t)((temp >> (8*i)) & 0xFF);
-+	}
-+
-+/*
-+	while (i < bytes_multi) {
-+	    temp = (uint32_t *)buffer;
-+	    *temp = dfc_reg->nddb;
-+	    i += 4;
-+	    buffer += 4;
-+	}
-+
-+	if (bytes_remain) {
-+		data = dfc_reg->nddb;
-+		for (i = 0; i < bytes_remain; i++) {
-+			*buffer++ = (uint8_t)((data>>(8*i)) & 0xFF);
-+		}
-+	}
-+*/
-+
-+	return;
-+}
-+
-+/******************************************************************************
-+  dfc_write_fifo
-+  Description:
-+	Write to data buffer of DFC from a buffer.Bytes can be same as data_size,
-+	also can be data_size-padding, but can¡¯t be random value, the left will
-+	be automatically padded by WriteFIFO.
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+	nbytes
-+	  Indicating how much data should be read into buffer.
-+	data_size
-+	  Specifing length of data transferred to/from DFC, which includes
-+	  padding bytes
-+	buffer
-+	  Pointer to the data buffer where data will be taken from to be written to
-+	  DFC data buffer
-+  Output Parameters:
-+	None
-+  Returns:
-+	None
-+*******************************************************************************/
-+void dfc_write_fifo(struct dfc_context *context, uint8_t *buffer, int nbytes)
-+{
-+	uint32_t bytes_multi = (nbytes & 0xFFFFFFFC);
-+	uint32_t bytes_remain = nbytes & 0x03;
-+	uint32_t i=0;
-+	uint32_t temp;
-+
-+	/* Write the bytes_multi*4 bytes data */
-+	while (i < bytes_multi) {
-+		temp = buffer[0] | buffer[1] << 8 |
-+				buffer[2] << 16 | buffer[3] << 24;
-+		dfc_write(context, DFC_NDDB, temp);
-+		buffer += 4;
-+		i += 4;
-+	}
-+
-+	/* Write the left bytes_remain bytes data */
-+	temp = 0xFFFFFFFF;
-+	for (i = 0; i < bytes_remain; i++)
-+		temp &= *buffer++ << i*8;
-+	dfc_write(context, DFC_NDDB, temp);
-+
-+/*
-+	while (i < nbytes) {
-+	    temp = (uint32_t *)buffer;
-+	    dfc_reg->nddb = *temp;
-+	    i += 4;
-+	    buffer += 4;
-+	}
-+*/
-+}
-+
-+/******************************************************************************
-+  dfc_read_badblock_addr
-+
-+  Description:
-+	This function reads bad block address in units of block starting from 0
-+	if bad block is detected. It takes into the account if the operation is
-+	for CS0 or CS1  depending on settings of chip_select parameter of DFC
-+	Mode structure.
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+  Output Parameters:
-+	pBadBlockAddr
-+	  Used to retrieve bad block address back to caller if bad block is
-+	  detected
-+  Returns:
-+	None
-+*******************************************************************************/
-+void dfc_read_badblock_addr(struct dfc_context *context, uint32_t *bbaddr)
-+{
-+	uint32_t ndbdr;
-+	if (0 == context->dfc_mode->chip_select)
-+		ndbdr = dfc_read(context, DFC_NDBDR0);
-+	else
-+		ndbdr = dfc_read(context, DFC_NDBDR1);
-+
-+	if (512 == context->flash_info->page_size) {
-+		ndbdr = (ndbdr >> 5) & 0xFFF;
-+		*bbaddr = ndbdr;
-+	} else if (2048 == context->flash_info->page_size) {
-+		/* 16 bits LB */
-+		ndbdr = (ndbdr >> 8);
-+		*bbaddr = ndbdr;
-+	}
-+	return;
-+}
-+
-+/******************************************************************************
-+  dfc_enable_int
-+
-+  Description:
-+	This function is used to enable DFC interrupts.	The bits in int_mask
-+	will be used to unmask NDCR register to enable corresponding interrupts.
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+	int_mask
-+	  Specifies what interrupts to enable
-+  Output Parameters:
-+	None
-+  Returns:
-+	None
-+*******************************************************************************/
-+void dfc_enable_int(struct dfc_context *context, uint32_t int_mask)
-+{
-+	uint32_t ndcr;
-+
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	ndcr &= ~int_mask;
-+	dfc_write(context, DFC_NDCR, ndcr);
-+
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	return;
-+}
-+
-+/******************************************************************************
-+  dfc_disable_int
-+
-+  Description:
-+	This function is used to disable DFC interrupts.
-+	The bits inint_mask will be used to mask NDCR register to disable
-+	corresponding interrupts.
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+	int_mask
-+	  Specifies what interrupts to disable
-+  Output Parameters:
-+	None
-+  Returns:
-+	None
-+*******************************************************************************/
-+void dfc_disable_int(struct dfc_context *context, uint32_t int_mask)
-+{
-+	uint32_t ndcr;
-+
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	ndcr |= int_mask;
-+	dfc_write(context, DFC_NDCR, ndcr);
-+
-+	ndcr = dfc_read(context, DFC_NDCR);
-+	return;
-+}
-+
-+/******************************************************************************
-+  dfc_clear_int
-+
-+  Description:
-+	This function is used to disable DFC interrupts.
-+	The bits in int_mask will be used to clear corresponding interrupts
-+	in NDCR register
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+	int_mask
-+	  Specifies what interrupts to clear
-+  Output Parameters:
-+	None
-+  Returns:
-+	None
-+*******************************************************************************/
-+void dfc_clear_int(struct dfc_context *context, uint32_t int_mask)
-+{
-+	dfc_write(context, DFC_NDSR, int_mask);
-+
-+	dfc_read(context, DFC_NDSR);
-+	return;
-+}
-+
-+/*
-+ * high level primitives
-+ */
-+
-+/******************************************************************************
-+  dfc_init
-+
-+  Description:
-+	This function does entire DFC initialization according to the NAND
-+	flash type currently used with platform, including setting MFP, set
-+	flash timing, set DFC mode, configuring specified flash parameters
-+	in DFC, clear ECC logic and page count register.
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+  Output Parameters:
-+	None
-+  Returns:
-+	0
-+	  if MFPRs are set correctly
-+	-EINVAL
-+	  if specified flash is not support by check bytes per page and pages per
-+	  block
-+******************************************************************************/
-+
-+static mfp_cfg_t pxa300_nand_cfg[] = {
-+	/* NAND */
-+	MFP_CFG_X(DF_INT_RnB, AF0, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nRE_nOE, AF1, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nWE, AF1, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_CLE_nOE, AF0, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nADV1_ALE, AF1, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nCS0, AF1, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nCS1, AF0, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_IO0, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO1, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO2, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO3, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO4, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO5, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO6, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO7, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO8, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO9, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO10, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO11, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO12, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO13, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO14, AF1, DS08X, PULL_LOW),
-+};
-+
-+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-+
-+int dfc_init(struct dfc_context* context, int type)
-+{
-+	int status;
-+	struct dfc_flash_info * flash_info;
-+	uint32_t ndcr = 0x00000FFF; /* disable all interrupts */
-+
-+	status = dfc_get_flash_info(type, &flash_info);
-+	if (status)
-+		return status;
-+	context->flash_info = flash_info;
-+
-+	pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_nand_cfg));
-+	//enable_dfc_pins();
-+
-+	dfc_set_timing(context, &context->flash_info->timing);
-+
-+	if (flash_info->enable_arbiter)
-+		ndcr |= NDCR_ND_ARB_EN;
-+
-+	if (64 == flash_info->page_per_block)
-+		ndcr |= NDCR_PG_PER_BLK;
-+	else if (32 != flash_info->page_per_block)
-+		return -EINVAL;
-+
-+	if (flash_info->row_addr_start)
-+		ndcr |= NDCR_RA_START;
-+
-+	ndcr |=  (flash_info->read_id_bytes)<<16;
-+
-+	ndcr |= (flash_info->dfc_mode) << 21;
-+
-+	if (flash_info->ncsx)
-+		ndcr |= NDCR_NCSX;
-+
-+	if (2048 == flash_info->page_size)
-+		ndcr |= NDCR_PAGE_SZ;
-+	else if (512 != flash_info->page_size)
-+		return -EINVAL;
-+
-+	if (16 == flash_info->flash_width)
-+		ndcr |= NDCR_DWIDTH_M;
-+	else if (8 != flash_info->flash_width)
-+		return -EINVAL;
-+
-+	if (16 == flash_info->dfc_width)
-+		ndcr |= NDCR_DWIDTH_C;
-+	else if (8 != flash_info->dfc_width)
-+		return -EINVAL;
-+
-+	dfc_write(context, DFC_NDCR, ndcr);
-+
-+	dfc_set_dma(context);
-+	dfc_set_ecc(context);
-+	dfc_set_spare(context);
-+
-+	return 0;
-+}
-+
-+/******************************************************************************
-+  dfc_init_no_gpio
-+
-+  Description:
-+	This function does entire DFC initialization according to the NAND
-+	flash type currently used with platform, including set flash timing,
-+	set DFC mode, configuring specified flash parameters in DFC, clear
-+	ECC logic and page count register. The only difference with dfc_init
-+	is that it does not set MFP&GPIO, very useful in OS loader
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+  Output Parameters:
-+	None
-+  Returns:
-+	0
-+	  if MFPRs are set correctly
-+	-EINVAL
-+	  if specified flash is not support by check bytes per page and pages
-+	  per block
-+******************************************************************************/
-+int dfc_init_no_gpio(struct dfc_context* context, int type)
-+{
-+	struct dfc_flash_info * flash_info;
-+	uint32_t ndcr = 0x00000FFF; /* disable all interrupts */
-+	int status;
-+
-+	status = dfc_get_flash_info(type, &flash_info);
-+	if (status)
-+		return status;
-+	context->flash_info = flash_info;
-+
-+	dfc_set_timing(context, &context->flash_info->timing);
-+
-+	if (flash_info->enable_arbiter)
-+		ndcr |= NDCR_ND_ARB_EN;
-+
-+	if (64 == flash_info->page_per_block)
-+		ndcr |= NDCR_PG_PER_BLK;
-+	else if (32 != flash_info->page_per_block)
-+		return -EINVAL;
-+
-+	if (flash_info->row_addr_start)
-+		ndcr |= NDCR_RA_START;
-+
-+	ndcr |=  (flash_info->read_id_bytes)<<16;
-+
-+	ndcr |= (flash_info->dfc_mode) << 21;
-+
-+	if (flash_info->ncsx)
-+		ndcr |= NDCR_NCSX;
-+
-+	if (2048 == flash_info->page_size)
-+		ndcr |= NDCR_PAGE_SZ;
-+	else if (512 != flash_info->page_size)
-+		return -EINVAL;
-+
-+	if (16 == flash_info->flash_width)
-+		ndcr |= NDCR_DWIDTH_M;
-+	else if (8 != flash_info->flash_width)
-+		return -EINVAL;
-+
-+	if (16 == flash_info->dfc_width)
-+		ndcr |= NDCR_DWIDTH_C;
-+	else if (8 != flash_info->dfc_width)
-+		return -EINVAL;
-+
-+	dfc_write(context, DFC_NDCR, ndcr);
-+
-+	dfc_set_dma(context);
-+	dfc_set_ecc(context);
-+	dfc_set_spare(context);
-+
-+	return 0;
-+}
-+
-+/*
-+ * This macro will be used in following NAND operation functions.
-+ * It is used to clear command buffer to ensure cmd buffer is empty
-+ * in case of operation is timeout
-+ */
-+#define ClearCMDBuf() 	do {					\
-+				dfc_stop(context); 		\
-+				udelay(NAND_OTHER_TIMEOUT);	\
-+			} while (0)
-+
-+/******************************************************************************
-+  dfc_reset_flash
-+
-+  Description:
-+	It reset the flash. The function can be called at any time when the
-+	device is in Busy state during random read/program/erase mode and
-+	reset operation will abort all these operations. After reset operation
-+	the device is ready to wait for next command
-+  Input Parameters:
-+	context
-+	  Pointer to DFC context structure
-+  Output Parameters:
-+	None
-+  Returns:
-+	0
-+	  execution succeeds
-+	-ETIME
-+	  if timeout
-+*******************************************************************************/
-+int dfc_reset_flash(struct dfc_context *context)
-+{
-+	struct dfc_flash_info *flash_info = context->flash_info;
-+	uint32_t event, event_out;
-+	unsigned long timeo;
-+	int status;
-+
-+	/* Send command */
-+	dfc_send_cmd(context, (uint16_t)flash_info->reset, 0xFFFFFFFF, 0);
-+
-+	event = (context->dfc_mode->chip_select)? \
-+			NDSR_CS1_CMDD : NDSR_CS0_CMDD;
-+
-+	/* Wait for CMDDM(command done successfully) */
-+	status = dfc_wait_event(context, event, &event_out,
-+		NAND_OTHER_TIMEOUT, 0);
-+
-+	if (status) {
-+		ClearCMDBuf();
-+		return status;
-+	}
-+
-+
-+	/* Wait until flash device is stable or timeout (10ms) */
-+	timeo = jiffies + HZ;
-+	do {
-+		if (monahans_df_dev_ready(context->mtd))
-+			break;
-+	} while (time_before(jiffies, timeo));
-+
-+	return 0;
-+}
-+
-+int dfc_readid(struct dfc_context *context, uint32_t *id)
-+{
-+	struct dfc_flash_info *flash_info = context->flash_info;
-+	uint32_t event_out;
-+	int status;
-+	char tmp[DFC_DATA_SIZE_ID];
-+
-+	/* Send command */
-+	status = dfc_send_cmd(context, (uint16_t)flash_info->read_id,
-+			0xFFFFFFFF, 0);
-+	if (status) {
-+		ClearCMDBuf();
-+		return status;
-+	}
-+
-+	/* Wait for CMDDM(command done successfully) */
-+	status = dfc_wait_event(context, NDSR_RDDREQ, &event_out,
-+		NAND_OTHER_TIMEOUT, 0);
-+	if (status) {
-+		ClearCMDBuf();
-+		return status;
-+	}
-+	dfc_read_fifo_partial(context, (unsigned char *)tmp,
-+			context->flash_info->read_id_bytes, DFC_DATA_SIZE_ID);
-+
-+	*id = tmp[0] | (tmp[1] << 8);
-+	return 0;
-+}
-+
-+#define ERR_NONE		0x0
-+#define ERR_DMABUSERR		(-0x01)
-+#define ERR_SENDCMD		(-0x02)
-+#define ERR_DBERR		(-0x03)
-+#define ERR_BBERR		(-0x04)
-+#define ERR_BUSY		(-0x05)
-+
-+#define STATE_CMD_SEND		0x1
-+#define STATE_CMD_HANDLE	0x2
-+#define STATE_DMA_TRANSFER	0x3
-+#define STATE_DMA_DONE		0x4
-+#define STATE_READY		0x5
-+#define STATE_SUSPENDED		0x6
-+#define	STATE_DATA_TRANSFER	0x7
-+
-+#define NAND_RELOC_MAX		127
-+#define NAND_RELOC_HEADER	0x524e
-+#define MAX_CHIP		1
-+#define NAND_CMD_DMA_LEN	12
-+
-+#define MAX_TIM_SIZE	0x1000
-+#define MAX_BBT_SLOTS	24
-+
-+struct reloc_item {
-+	unsigned short from;
-+	unsigned short to;
-+};
-+
-+struct reloc_table {
-+	unsigned short header;
-+	unsigned short total;
-+	struct reloc_item reloc[NAND_RELOC_MAX];
-+};
-+
-+struct monahans_dfc_info {
-+	unsigned int		state;
-+	struct dfc_context	*context;
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+	dma_addr_t 		data_buf_addr;
-+	char			*data_buf;
-+	int 			data_dma;
-+	struct pxa_dma_desc	*data_desc;
-+	dma_addr_t 		data_desc_addr;
-+	dma_addr_t 		cmd_buf_addr;
-+	char 			*cmd_buf;
-+	int 			cmd_dma;
-+	struct pxa_dma_desc	*cmd_desc;
-+	dma_addr_t 		cmd_desc_addr;
-+	u64 			dma_mask;
-+#else
-+	char 			*data_buf;
-+#endif
-+	u32 			current_slot;
-+	struct reloc_table 	table;
-+	unsigned int 		table_init;
-+	/* relate to the command */
-+	unsigned int 		cmd;
-+	unsigned int 		addr;
-+	unsigned int 		column;
-+	int 			retcode;
-+	unsigned int 		buf_count;
-+	struct completion 	cmd_complete;
-+};
-+
-+static struct dfc_mode dfc_mode =
-+{
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+	1,	/* enable DMA */
-+#else
-+	0,
-+#endif
-+	1,	/* enable ECC */
-+	1,	/* enable SPARE */
-+	0,	/* CS0 */
-+};
-+
-+
-+struct dfc_context dfc_context =
-+{
-+	0,	/* Initialized at function monahans_df_init() */
-+	&dfc_mode,
-+	0,	/* data dma channel */
-+	0,	/* cmd dma channel */
-+	NULL, 	/* &zylonite_flashinfo */
-+};
-+
-+
-+/*
-+ * MTD structure for Zylonite board
-+ */
-+static struct mtd_info *monahans_mtd = NULL;
-+
-+/*
-+ * BootRom and XDB will use last 127 block, and they will keep all the status
-+ * of the bootloader and image, so skip the first 2M size and last 2M size
-+ */
-+static struct mtd_partition partition_info[] = {
-+	{
-+		name:		"Bootloader",
-+//#ifdef	CONFIG_CPU_MONAHANS_LV
-+		size:		0x00060000,
-+//#else
-+//		size:		0x00040000,
-+//#endif
-+		offset:		0,
-+		mask_flags:	MTD_WRITEABLE  /* force read-only */
-+	},{
-+		name:		"Kernel",
-+		size:		0x00200000,
-+//#ifdef	CONFIG_CPU_MONAHANS_LV
-+		offset:		0x00060000,
-+//#else
-+//		offset:		0x00040000,
-+//#endif
-+		mask_flags:	MTD_WRITEABLE  /* force read-only */
-+	},{
-+		name:		"Filesystem",
-+		size:		0x05000000,
-+//#ifdef	CONFIG_CPU_MONAHANS_LV
-+		offset:		0x00260000,
-+//#else
-+//		offset:		0x00240000,
-+//#endif
-+	}, {
-+		name:		"MassStorage",
-+		size:		0x0, /* It will be set at probe function */
-+		offset:		MTDPART_OFS_APPEND /* Append after fs section */
-+	}, {
-+		name:		"BBT",
-+		size:		0x0, /* It will be set at probe function */
-+		offset:		MTDPART_OFS_APPEND,/* Append after fs section */
-+		mask_flags:	MTD_WRITEABLE  /* force read-only */
-+	}
-+};
-+
-+#define		PART_NUM	ARRAY_SIZE(partition_info)
-+
-+/* MHN_OBM_V2 is related to BBT in MOBM V2
-+ * MHN_OBM_V3 is related to BBT in MOBM V3
-+ */
-+enum {
-+	MHN_OBM_NULL = 0,
-+	MHN_OBM_V1,
-+	MHN_OBM_V2,
-+	MHN_OBM_V3,
-+	MHN_OBM_INVAL
-+} MHN_OBM_TYPE;
-+
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+static uint8_t scan_main_bbt_pattern[] = { 'p', 'x', 'a', '1' };
-+static uint8_t scan_mirror_bbt_pattern[] = { '0', 'a', 'x', 'p' };
-+
-+static struct nand_bbt_descr monahans_bbt_default = {
-+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-+			| NAND_BBT_2BIT | NAND_BBT_VERSION,
-+	.maxblocks = 2,
-+	.len = 2,
-+	.offs = 0,
-+	.pattern = scan_ff_pattern,
-+};
-+
-+static struct nand_bbt_descr monahans_bbt_main = {
-+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-+			| NAND_BBT_2BIT | NAND_BBT_VERSION,
-+	.veroffs = 6,
-+	.maxblocks = 2,
-+        .offs = 2,
-+        .len = 4,
-+        .pattern = scan_main_bbt_pattern,
-+};
-+
-+static struct nand_bbt_descr monahans_bbt_mirror = {
-+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-+			| NAND_BBT_2BIT | NAND_BBT_VERSION,
-+	.veroffs = 6,
-+	.maxblocks = 2,
-+        .offs = 2,
-+        .len = 4,
-+        .pattern = scan_mirror_bbt_pattern,
-+};
-+
-+#if 0
-+static struct nand_bbt_descr monahans_bbt_main = {
-+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-+			| NAND_BBT_2BIT | NAND_BBT_VERSION,
-+	.veroffs = 2,
-+	.maxblocks = 2,
-+        .offs = 		0x0,
-+        .len = 			2,
-+        .pattern = 		scan_ff_pattern
-+};
-+static struct nand_bbt_descr monahans_bbt_mirror = {
-+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-+			| NAND_BBT_2BIT | NAND_BBT_VERSION,
-+	.veroffs = 2,
-+	.maxblocks = 2,
-+        .offs = 0x0,
-+        .len = 2,
-+        .pattern = scan_ff_pattern
-+};
-+#endif
-+
-+static struct nand_ecclayout monahans_lb_nand_oob = {
-+	.eccbytes = 24,
-+	.eccpos = {
-+		40, 41, 42, 43, 44, 45, 46, 47,
-+		48, 49, 50, 51, 52, 53, 54, 55,
-+		56, 57, 58, 59, 60, 61, 62, 63},
-+	.oobfree = { {2, 38} }
-+};
-+
-+/*
-+ * Monahans OOB size is only 8 bytes, and the rest 8 bytes is controlled by
-+ * hardware for ECC. We construct virutal ECC buffer. Acutally, ECC is 6 bytes
-+ * and the remain 2 bytes are reserved.
-+ */
-+static struct nand_ecclayout monahans_sb_nand_oob = {
-+	.eccbytes = 6,
-+	.eccpos = {8, 9, 10, 11, 12, 13 },
-+	.oobfree = { {2, 6} }
-+};
-+
-+
-+static inline int is_buf_blank(u8 * buf, int size)
-+{
-+	int i = 0;
-+	while(i < size) {
-+		if (*((unsigned long *)(buf + i)) != 0xFFFFFFFF)
-+			return 0;
-+		i += 4;
-+	}
-+	if (i > size) {
-+		i -= 4;
-+		while( i < size) {
-+			if(*(buf + i) != 0xFF)
-+				return 0;
-+			i++;
-+		}
-+	}
-+	return 1;
-+}
-+
-+static void print_buf(char *buf, int num)
-+{
-+	int i = 0;
-+
-+	while (i < num) {
-+		printk(KERN_ERR "0x%08x: %02x %02x %02x %02x %02x %02x %02x"
-+		" %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
-+		(unsigned int) (i),  buf[i], buf[i+1], buf[i+2],
-+		buf[i+3], buf[i+4], buf[i+5], buf[i+6], buf[i+7],
-+		buf[i+8], buf[i+9], buf[i+10],buf[i+11], buf[i+12],
-+		buf[i+13], buf[i+14], buf[i+15]);
-+		i += 16;
-+	}
-+}
-+
-+static int inline enable_dfc_dma(struct dfc_context *context, int enable)
-+{
-+	int ret = dfc_mode.enable_dma;
-+	unsigned long ndcr;
-+
-+	if (!enable) {
-+		ndcr = dfc_read(context, DFC_NDCR);
-+		ndcr &= ~NDCR_DMA_EN;
-+		dfc_write(context, DFC_NDCR, ndcr);
-+		dfc_mode.enable_dma = 0;
-+	} else {
-+		ndcr = dfc_read(context, DFC_NDCR);
-+		ndcr |= NDCR_DMA_EN;
-+		dfc_write(context, DFC_NDCR, ndcr);
-+		dfc_mode.enable_dma = 1;
-+	}
-+	return ret;
-+}
-+
-+
-+static void inline dump_info(struct monahans_dfc_info *info)
-+{
-+	if (!info)
-+		return;
-+
-+	printk(KERN_ERR "cmd:0x%x; addr:0x%x; retcode:%d; state:%d \n",
-+		info->cmd, info->addr, info->retcode, info->state);
-+}
-+
-+static void inline  enable_hw_ecc(struct dfc_context* context, int enable)
-+{
-+	unsigned long ndcr;
-+
-+	if (!enable) {
-+		ndcr = dfc_read(context, DFC_NDCR);
-+		ndcr &= ~NDCR_ECC_EN;
-+		dfc_write(context, DFC_NDCR, ndcr);
-+		dfc_mode.enable_ecc = 0;
-+	}
-+	else {
-+		ndcr = dfc_read(context, DFC_NDCR);
-+		ndcr |= NDCR_ECC_EN;
-+		dfc_write(context, DFC_NDCR, ndcr);
-+		dfc_mode.enable_ecc = 1;
-+	}
-+}
-+
-+/*
-+ * Now, we are not sure that the NDSR_RDY mean the flash is ready.
-+ * Need more test.
-+ */
-+static int monahans_df_dev_ready(struct mtd_info *mtd)
-+{
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+				(((struct nand_chip *)(mtd->priv))->priv);
-+
-+	struct dfc_context* context = info->context;
-+
-+	return ((dfc_read(context, DFC_NDSR) & NDSR_RDY));
-+}
-+
-+/* each read, we can only read 4bytes from NDDB, we must buffer it */
-+static u_char monahans_df_read_byte(struct mtd_info *mtd)
-+{
-+	char retval = 0xFF;
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+				(((struct nand_chip *)(mtd->priv))->priv);
-+
-+	if (info->column < info->buf_count) {
-+		/* Has just send a new command? */
-+		retval = info->data_buf[info->column++];
-+	}
-+	return retval;
-+}
-+
-+static void monahans_df_write_byte(struct mtd_info *mtd, u8 byte)
-+{
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+				(((struct nand_chip *)(mtd->priv))->priv);
-+	info->data_buf[info->column++] = byte;
-+}
-+
-+static u16 monahans_df_read_word(struct mtd_info *mtd)
-+{
-+	u16 retval = 0xFFFF;
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+				(((struct nand_chip *)(mtd->priv))->priv);
-+
-+	if (!(info->column & 0x01) && info->column < info->buf_count) {
-+		retval = *((u16 *)(info->data_buf+info->column));
-+		info->column += 2;
-+	}
-+	return retval;
-+}
-+
-+static void monahans_df_write_word(struct mtd_info *mtd, u16 word)
-+{
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+				(((struct nand_chip *)(mtd->priv))->priv);
-+
-+	if (!(info->column & 0x01) && info->column < info->buf_count) {
-+		*((u16 *)(info->data_buf+info->column)) = word;
-+		info->column += 2;
-+	}
-+}
-+
-+static void monahans_df_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+				(((struct nand_chip *)(mtd->priv))->priv);
-+	int real_len = min((unsigned int)len, info->buf_count - info->column);
-+
-+	memcpy(buf, info->data_buf + info->column, real_len);
-+	info->column += real_len;
-+}
-+
-+static void monahans_df_write_buf(struct mtd_info *mtd,
-+		const u_char *buf, int len)
-+{
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+				(((struct nand_chip *)(mtd->priv))->priv);
-+	int real_len = min((unsigned int)len, info->buf_count - info->column);
-+
-+	memcpy(info->data_buf + info->column, buf, real_len);
-+	info->column += real_len;
-+}
-+
-+static int monahans_df_verify_buf(struct mtd_info *mtd,
-+		const u_char *buf, int len)
-+{
-+	return 0;
-+}
-+
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+static void monahans_dfc_cmd_dma_irq(int channel, void *data,
-+		struct pt_regs *regs)
-+{
-+	unsigned int dcsr;
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)data;
-+	struct dfc_context* context = info->context;
-+	struct dfc_mode* dfc_mode = context->dfc_mode;
-+	unsigned int intm;
-+
-+	dcsr = DCSR(channel);
-+	DCSR(channel) = dcsr;
-+
-+	intm = (dfc_mode->chip_select) ? \
-+		(NDSR_CS1_BBD | NDSR_CS1_CMDD) : (NDSR_CS0_BBD | NDSR_CS0_CMDD);
-+
-+	D1(printk("cmd dma interrupt, channel:%d, DCSR:0x%08x\n", \
-+			channel, dcsr));
-+
-+	if (dcsr & DCSR_BUSERR) {
-+		info->retcode = ERR_DMABUSERR;
-+		complete(&info->cmd_complete);
-+	} else {
-+		if ((info->cmd == NAND_CMD_READ0) ||
-+				(info->cmd == NAND_CMD_READOOB)|| \
-+				(info->cmd == NAND_CMD_READID) || \
-+				(info->cmd == NAND_CMD_STATUS)) {
-+			dfc_enable_int(context, NDSR_RDDREQ | NDSR_DBERR);
-+		} else if (info->cmd == NAND_CMD_PAGEPROG)
-+			dfc_enable_int(context, NDSR_WRDREQ);
-+		else if (info->cmd == NAND_CMD_ERASE1)
-+			dfc_enable_int(context, intm);
-+	}
-+
-+	return;
-+}
-+
-+
-+static void monahans_dfc_data_dma_irq(int channel, void *data,
-+		struct pt_regs *regs)
-+{
-+	unsigned int dcsr, intm;
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)data;
-+	struct dfc_context* context = info->context;
-+	struct dfc_mode* dfc_mode = context->dfc_mode;
-+
-+	dcsr = DCSR(channel);
-+	DCSR(channel) = dcsr;
-+
-+	intm = (dfc_mode->chip_select) ? \
-+		(NDSR_CS1_BBD | NDSR_CS1_CMDD) : (NDSR_CS0_BBD | NDSR_CS0_CMDD);
-+
-+	D1(printk("data dma interrupt, channel:%d, DCSR:0x%08x\n",
-+			channel, dcsr));
-+	if (dcsr & DCSR_BUSERR) {
-+		info->retcode = ERR_DMABUSERR;
-+		complete(&info->cmd_complete);
-+	}
-+
-+	if (info->cmd == NAND_CMD_PAGEPROG) {
-+		/* DMA interrupt may be interrupted by other IRQs*/
-+		info->state = STATE_DMA_DONE;
-+		dfc_enable_int(context, intm);
-+	} else {
-+		info->state = STATE_READY;
-+		complete(&info->cmd_complete);
-+	}
-+
-+}
-+#endif
-+
-+static irqreturn_t monahans_dfc_irq(int irq, void *devid)
-+{
-+	unsigned int status, event, intm, cmd;
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)devid;
-+	struct dfc_context* context = info->context;
-+	struct dfc_mode* dfc_mode = context->dfc_mode;
-+
-+	intm =  (dfc_mode->chip_select) ? \
-+		(NDSR_CS1_BBD | NDSR_CS1_CMDD) : (NDSR_CS0_BBD | NDSR_CS0_CMDD);
-+	event = (dfc_mode->chip_select) ? \
-+		(NDSR_CS1_BBD | NDSR_CS1_CMDD) : (NDSR_CS0_BBD | NDSR_CS0_CMDD);
-+
-+	status = dfc_read(context, DFC_NDSR);
-+	D1(printk("DFC irq, NDSR:0x%x\n", status));
-+	if (status & (NDSR_RDDREQ | NDSR_DBERR)) {
-+		if (status & NDSR_DBERR) {
-+			info->retcode = ERR_DBERR;
-+		}
-+
-+		dfc_disable_int(context, NDSR_RDDREQ | NDSR_DBERR);
-+		dfc_clear_int(context, NDSR_RDDREQ | NDSR_DBERR);
-+		if (info->cmd == NAND_CMD_READID)
-+			cmd = context->flash_info->read_id;
-+		else if (info->cmd == NAND_CMD_STATUS)
-+			cmd = context->flash_info->read_status;
-+		else if (info->cmd == NAND_CMD_READ0 ||
-+				info->cmd == NAND_CMD_READOOB)
-+			cmd = context->flash_info->read1;
-+		else {
-+			printk(KERN_ERR "No according command:0x%x happens\n",
-+					info->cmd);
-+			goto out;
-+		}
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+		info->state = STATE_DMA_TRANSFER;
-+		dfc_start_data_dma(context,
-+				(struct pxa_dma_desc*)info->data_desc_addr);
-+#else
-+		info->state = STATE_DATA_TRANSFER;
-+		complete(&info->cmd_complete);
-+#endif
-+	} else if (status & NDSR_WRDREQ) {
-+		dfc_disable_int(context, NDSR_WRDREQ);
-+		dfc_clear_int(context, NDSR_WRDREQ);
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+		info->state = STATE_DMA_TRANSFER;
-+		dfc_start_data_dma(context,
-+				(struct pxa_dma_desc*)info->data_desc_addr);
-+#else
-+		info->state = STATE_DATA_TRANSFER;
-+		complete(&info->cmd_complete);
-+#endif
-+	} else if (status & event) {
-+		if (status & NDSR_CS0_BBD) {
-+			info->retcode = ERR_BBERR;
-+		}
-+
-+		dfc_disable_int(context, intm);
-+		dfc_clear_int(context, event);
-+		info->state = STATE_READY;
-+		complete(&info->cmd_complete);
-+	}
-+out:
-+	return IRQ_HANDLED;
-+}
-+
-+static int dfc_send_command(struct mtd_info *mtd, unsigned int cmd,
-+				unsigned int addr, unsigned int num_pages,
-+				unsigned int event)
-+{
-+
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+			(((struct nand_chip *)(mtd->priv))->priv);
-+	struct dfc_context* context = info->context;
-+	int status;
-+	int ret;
-+
-+	D1(printk("ready send command, cmd:0x%x, at address:0x%x,"
-+		" num_pages:%d, wait event:0x%x\n", cmd, addr, num_pages, event));
-+
-+	info->state = STATE_CMD_SEND;
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+	status = dfc_setup_cmd_dma(context, cmd, addr, num_pages,
-+			(uint32_t *)info->cmd_buf, info->cmd_buf_addr,
-+			DDADR_STOP, DCMD_ENDIRQEN, info->cmd_desc);
-+#else
-+	status = dfc_send_cmd(context, cmd, addr, num_pages);
-+#endif
-+	if (status) {
-+		info->retcode = ERR_SENDCMD;
-+		dfc_stop(context);
-+		udelay(20);
-+		printk(KERN_ERR "fail send command\n");
-+		return info->retcode;
-+	}
-+	info->state = STATE_CMD_HANDLE;
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+	dfc_setup_data_dma(context, cmd, info->data_buf_addr,
-+			DDADR_STOP, DCMD_ENDIRQEN, info->data_desc);
-+	dfc_start_cmd_dma(context, (struct pxa_dma_desc*)info->cmd_desc_addr);
-+#endif
-+#ifndef CONFIG_MTD_NAND_MONAHANS_DMA
-+	dfc_enable_int(context, event);
-+#endif
-+	ret = wait_for_completion_timeout(&info->cmd_complete, 2*HZ);
-+	if (!ret){
-+		printk(KERN_ERR "Command time out\n");
-+		dump_info(info);
-+	}
-+	D1(printk("command return, cmd:0x%x, retcode:%d\n",
-+			info->cmd, info->retcode));
-+	return 0;
-+}
-+
-+static void monahans_df_command(struct mtd_info *mtd, unsigned command,
-+		int column, int page_addr )
-+{
-+	struct nand_chip *this = (struct nand_chip *)(mtd->priv);
-+	struct monahans_dfc_info *info =
-+			(struct monahans_dfc_info *)(this->priv);
-+	struct dfc_context *context = info->context;
-+	struct dfc_flash_info * flash_info = context->flash_info;
-+	int ret, pages_shift;
-+	int status;
-+#ifndef CONFIG_MTD_NAND_MONAHANS_DMA
-+	int datasize;
-+       	int paddingsize;
-+#endif
-+	unsigned int to;
-+
-+	D1(printk("command:0x%x at address:0x%x, column:0x%x\n",
-+			command, page_addr, column));
-+
-+	if (info->state != STATE_READY) {
-+		printk(KERN_ERR "CHIP is not ready.\n");
-+		dump_info(info);
-+		info->retcode = ERR_BUSY;
-+		return;
-+	}
-+	info->retcode = ERR_NONE;
-+	pages_shift = this->phys_erase_shift - this->page_shift;
-+	if (info->table_init) {
-+		to = search_rel_block((page_addr >> pages_shift), mtd);
-+	if (to) {
-+			page_addr = (to << pages_shift) | (page_addr
-+					& ((1 << pages_shift) - 1));
-+		}
-+	}
-+
-+	switch ( command ) {
-+	case NAND_CMD_READOOB:
-+		/*
-+		 * DFC has mark the last 8 bytes OOB data if HARDEARE_ECC is
-+		 * enabled. We must first disable the HARDWARE_ECC for getting
-+		 * all the 16 bytes OOB
-+		 */
-+		enable_hw_ecc(context, 0);
-+		info->buf_count = mtd->writesize + mtd->oobsize;
-+		info->column = mtd->writesize + column;
-+		info->cmd = command;
-+		info->addr = page_addr << this->page_shift;
-+		ret = dfc_send_command(mtd, flash_info->read1, info->addr,
-+				1, NDSR_RDDREQ | NDSR_DBERR);
-+#ifndef CONFIG_MTD_NAND_MONAHANS_DMA
-+		dfc_get_pattern(info->context, flash_info->read1, &datasize,
-+				&paddingsize);
-+		dfc_read_fifo_partial(info->context, info->data_buf,
-+				min(info->buf_count, datasize), datasize);
-+		info->state = STATE_READY;
-+#endif
-+		/* We only are OOB, so if the data has error, does not matter */
-+		if (info->retcode == ERR_DBERR)
-+			info->retcode = ERR_NONE;
-+		enable_hw_ecc(context, 1);
-+		break;
-+
-+	case NAND_CMD_READ0:
-+		enable_hw_ecc(context, 1);
-+		info->column = column;
-+		info->cmd = command;
-+		info->buf_count = mtd->writesize + mtd->oobsize;
-+		memset(info->data_buf, 0xFF, info->buf_count);
-+		info->addr = page_addr << this->page_shift;
-+
-+		ret = dfc_send_command(mtd, flash_info->read1, info->addr,
-+				1, NDSR_RDDREQ | NDSR_DBERR);
-+#ifndef CONFIG_MTD_NAND_MONAHANS_DMA
-+		dfc_get_pattern(info->context, flash_info->read1, &datasize,
-+				&paddingsize);
-+		dfc_read_fifo_partial(info->context, info->data_buf,
-+				min(info->buf_count, datasize), datasize);
-+		info->state = STATE_READY;
-+#endif
-+		/* When the data buf is blank, the DFC will report DB error */
-+		if (info->retcode == ERR_DBERR && is_buf_blank(info->data_buf,
-+				mtd->writesize))
-+			info->retcode = ERR_NONE;
-+
-+		if (info->retcode == ERR_DBERR) {
-+			printk(KERN_ERR "DB error at address 0x%x\n",
-+				info->addr);
-+			print_buf(info->data_buf, info->buf_count);
-+		}
-+		break;
-+	case NAND_CMD_SEQIN:
-+		/* Write only OOB? */
-+
-+		info->cmd = command;
-+		if (column >= mtd->writesize) {
-+			info->buf_count = mtd->writesize + mtd->oobsize;
-+			enable_hw_ecc(context, 0);
-+		} else {
-+			info->buf_count = mtd->writesize + mtd->oobsize;
-+			enable_hw_ecc(context, 1);
-+		}
-+		memset(info->data_buf, 0xFF, mtd->writesize + mtd->oobsize);
-+		info->column = column;
-+		info->addr = page_addr << this->page_shift;
-+		break;
-+	case NAND_CMD_PAGEPROG:
-+		/* prevois command is NAND_CMD_SEIN ?*/
-+		if (info->cmd != NAND_CMD_SEQIN) {
-+			info->cmd = command;
-+			info->retcode = ERR_SENDCMD;
-+			printk(KERN_ERR "Monahans NAND device: "
-+				"No NAND_CMD_SEQIN executed before.\n");
-+			enable_hw_ecc(context, 1);
-+			break;
-+		}
-+		info->cmd = command;
-+		ret = dfc_send_command(mtd, flash_info->program, info->addr,
-+				1, NDSR_WRDREQ);
-+
-+#ifndef CONFIG_MTD_NAND_MONAHANS_DMA
-+		if (ret != 0)
-+			break;
-+
-+		dfc_get_pattern(info->context, flash_info->program, &datasize,
-+				&paddingsize);
-+		dfc_write_fifo_partial(info->context, info->data_buf, datasize,
-+				datasize);
-+
-+		if (info->context->dfc_mode->chip_select)
-+			dfc_enable_int(info->context,
-+				NDSR_CS1_BBD | NDSR_CS1_CMDD);
-+		else
-+			dfc_enable_int(info->context,
-+				NDSR_CS0_BBD | NDSR_CS0_CMDD);
-+
-+		ret = wait_for_completion_timeout(&info->cmd_complete, 2*HZ);
-+		if (!ret){
-+			printk(KERN_ERR "Programm Command time out\n");
-+			dump_info(info);
-+		}
-+
-+		if (info->retcode == ERR_BBERR) {
-+			mtd->block_markbad(mtd, info->addr);
-+		}
-+#endif
-+		break;
-+	case NAND_CMD_ERASE1:
-+		info->cmd = command;
-+		info->addr = (page_addr >> pages_shift) << this->phys_erase_shift;
-+
-+		if (info->context->dfc_mode->chip_select)
-+			ret = dfc_send_command(mtd, flash_info->erase,
-+				info->addr, 0, NDSR_CS1_BBD | NDSR_CS1_CMDD);
-+		else
-+			ret = dfc_send_command(mtd, flash_info->erase,
-+				info->addr, 0, NDSR_CS0_BBD | NDSR_CS0_CMDD);
-+
-+		if (info->retcode == ERR_BBERR) {
-+			mtd->block_markbad(mtd, info->addr);
-+		}
-+		break;
-+	case NAND_CMD_ERASE2:
-+		break;
-+	case NAND_CMD_READID:
-+		info->cmd = command;
-+		info->buf_count = flash_info->read_id_bytes;
-+		info->column = 0;
-+		info->addr = 0xFFFFFFFF;
-+		ret = dfc_send_command(mtd, flash_info->read_id, info->addr,
-+				0, NDSR_RDDREQ);
-+#ifndef CONFIG_MTD_NAND_MONAHANS_DMA
-+		dfc_get_pattern(info->context, flash_info->read_id, &datasize,
-+				&paddingsize);
-+		dfc_read_fifo_partial(info->context, info->data_buf,
-+				info->buf_count, datasize);
-+		info->state = STATE_READY;
-+#endif
-+		D1(printk("ReadID, [1]:0x%x, [2]:0x%x\n",
-+			info->data_buf[0], info->data_buf[1]));
-+		break;
-+	case NAND_CMD_STATUS:
-+		info->cmd = command;
-+		info->buf_count = 1;
-+		info->column = 0;
-+		info->addr = 0xFFFFFFFF;
-+		ret = dfc_send_command(mtd, flash_info->read_status,
-+			info->addr, 0, NDSR_RDDREQ);
-+#ifndef CONFIG_MTD_NAND_MONAHANS_DMA
-+		dfc_get_pattern(info->context, flash_info->read_status,
-+			&datasize, &paddingsize);
-+		dfc_read_fifo_partial(info->context, info->data_buf,
-+			info->buf_count, datasize);
-+		info->state = STATE_READY;
-+#endif
-+		break;
-+
-+	case NAND_CMD_RESET:
-+		status = dfc_reset_flash(&dfc_context);
-+		if (status) {
-+			printk(KERN_WARNING "Monahans NAND device:"
-+				"NAND_CMD_RESET error\n");
-+		}
-+		break;
-+	default:
-+		printk(KERN_WARNING "Monahans NAND device:"
-+			"Non-support the command.\n");
-+		break;
-+	}
-+
-+	if (info->retcode != ERR_NONE)
-+		dfc_stop(info->context);
-+}
-+
-+static void monahans_df_select_chip(struct mtd_info *mtd, int chip)
-+{
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+			(((struct nand_chip *)(mtd->priv))->priv);
-+
-+	if (chip <= MAX_CHIP)
-+		info->context->dfc_mode->chip_select = chip;
-+	else
-+		printk(KERN_ERR "Monahans NAND device:"
-+			"not select the NAND chips!\n");
-+}
-+
-+static int monahans_df_waitfunc(struct mtd_info *mtd,
-+		struct nand_chip *this)
-+{
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+			(((struct nand_chip *)(mtd->priv))->priv);
-+
-+	/* monahans_df_send_command has waited for command complete */
-+	if (this->state == FL_WRITING || this->state == FL_ERASING) {
-+		if (info->retcode == ERR_NONE)
-+			return 0;
-+		else {
-+			/*
-+			 * any error make it return 0x01 which will tell
-+			 * the caller the erase and write fail
-+			 */
-+			return 0x01;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int monahans_df_calculate_ecc(struct mtd_info *mtd,
-+		const u_char *dat, u_char *ecc_code)
-+{
-+	return 0;
-+}
-+
-+static int monahans_df_correct_data(struct mtd_info *mtd,
-+		u_char *dat, u_char *read_ecc, u_char *calc_ecc)
-+{
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+			(((struct nand_chip *)(mtd->priv))->priv);
-+
-+	/*
-+	 * Any error include ERR_SEND_CMD, ERR_DBERR, ERR_BUSERR, we
-+	 * consider it as a ecc error which will tell the caller the
-+	 * read fail We have distinguish all the errors, but the
-+	 * nand_read_ecc only check this function return value
-+	 */
-+	if (info->retcode != ERR_NONE)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static void monahans_df_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+	return;
-+}
-+
-+/*
-+ * The relocation table management is different between MOBM V2 and V3.
-+ *
-+ * MOBM V2 is applied on chips taped out before MhnLV A0.
-+ * MOBM V3 is applied on chips taped out after MhnLV A0. It's also applied
-+ * on MhnLV A0.
-+ */
-+static int calc_obm_ver(void)
-+{
-+	unsigned int	cpuid;
-+	/* read CPU ID */
-+	__asm__ (
-+		"mrc p15, 0, %0, c0, c0, 0\n"
-+		: "=r" (cpuid)
-+	);
-+	/* It's not xscale chip. */
-+	if ((cpuid & 0xFFFF0000) != 0x69050000)
-+		return MHN_OBM_INVAL;
-+	/* It's MhnP Ax */
-+	if ((cpuid & 0x0000FFF0) == 0x00006420)
-+		return MHN_OBM_V2;
-+	/* It's MhnP Bx */
-+	if ((cpuid & 0x0000FFF0) == 0x00006820) {
-+		if ((cpuid & 0x0F) <= 5)
-+			return MHN_OBM_V2;
-+		else
-+			return MHN_OBM_V3;
-+	}
-+	/* It's MhnL Ax */
-+	if ((cpuid & 0x0000FFF0) == 0x00006880) {
-+		if ((cpuid & 0x0F) == 0)
-+			return MHN_OBM_V2;
-+		else
-+			return MHN_OBM_V3;
-+	}
-+	/* It's MhnLV Ax */
-+	if ((cpuid & 0x0000FFF0) == 0x00006890)
-+		return MHN_OBM_V3;
-+	return MHN_OBM_INVAL;
-+}
-+
-+
-+/*
-+ * MOBM maintains a relocation table. It's used to replace bad blocks.
-+ * If block A is bad, it will use block B instead.
-+ * There're 127 relocated blocks. All of them reside in the bottom of NAND
-+ * flash. So they're reserved and can't be calculated in mtd size and chip
-+ * size.
-+ */
-+static int read_reloc_table(struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = NULL;
-+	struct monahans_dfc_info *info = NULL;
-+	struct dfc_context *context = NULL;
-+	struct reloc_table *table = NULL;
-+	int page, maxslot;
-+	int obm, valid;
-+
-+	obm = calc_obm_ver();
-+	this = (struct nand_chip *)(mtd->priv);
-+	info = (struct monahans_dfc_info *)(this->priv);
-+	context = info->context;
-+
-+	mtd->size -= (NAND_RELOC_MAX * mtd->erasesize);
-+	this->chipsize -= (NAND_RELOC_MAX << this->phys_erase_shift);
-+	page = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
-+
-+	this->select_chip(mtd, 0);
-+	valid = 0;
-+	if (obm == MHN_OBM_V2) {
-+		/* On MOBM V2, the relocation table resides in the last page
-+		 * of the first block.
-+		 */
-+		memset(info->data_buf, 0, BUFLEN);
-+		monahans_df_command(mtd, NAND_CMD_READ0, 0, page);
-+	memcpy(((unsigned char *)&(info->table)), info->data_buf,
-+			sizeof(struct reloc_table));
-+		if (info->table.header == NAND_RELOC_HEADER)
-+			valid = 1;
-+	} else if (obm == MHN_OBM_V3) {
-+		/* On MOBM V3, there're several relocation tables in the first
-+		 * block.
-+		 * When new bad blocks are found, a new relocation table will
-+		 * be generated and written back to the first block. But the
-+		 * original relocation table won't be erased. Even if the new
-+		 * relocation table is written wrong, system can still find an
-+		 * old one.
-+		 * One page contains one slot.
-+		 */
-+		maxslot = 1 << (this->phys_erase_shift - this->page_shift);
-+		page = maxslot - MAX_BBT_SLOTS;
-+		for (; page < maxslot; page++) {
-+			monahans_df_command(mtd, NAND_CMD_READ0, 0, page);
-+			table = (struct reloc_table *)info->data_buf;
-+			if (info->retcode == ERR_NONE) {
-+				if (table->header != NAND_RELOC_HEADER) {
-+					continue;
-+	} else {
-+					memcpy(((unsigned char *)&(info->table)),
-+						table, sizeof(struct reloc_table));
-+					valid = 1;
-+					break;
-+				}
-+			}
-+	}
-+
-+	} else {
-+		printk(KERN_ERR "The version of MOBM isn't supported\n");
-+	}
-+	if (valid) {
-+		memcpy(((unsigned char *)&(info->table)), info->data_buf,
-+			sizeof(struct reloc_table));
-+		printk(KERN_DEBUG "relocation table at page:%d\n", page);
-+		PRINT_BUF((unsigned char *)&(info->table),
-+			sizeof(struct reloc_table));
-+	info->table_init = 1;
-+	} else {
-+		/* There should be a valid relocation table slot at least. */
-+		printk(KERN_ERR "NO VALID relocation table can be \
-+				recognized\n");
-+		printk(KERN_ERR "CAUTION: It may cause unpredicated error\n");
-+		printk(KERN_ERR "Please re-initialize the NAND flash.\n");
-+		memset((unsigned char *)&(info->table), 0,
-+				sizeof(struct reloc_table));
-+		info->table_init = 0;
-+		return -EINVAL;
-+	}
-+	return 0;
-+}
-+
-+/* add the relocation entry into the relocation table
-+ * It's valid on MOBM V3.
-+ * If the relocated block is bad, an new entry will be added into the
-+ * bottom of the relocation table.
-+ */
-+static int update_rel_table(struct mtd_info *mtd, int block)
-+{
-+	struct nand_chip *this = NULL;
-+	struct monahans_dfc_info *info = NULL;
-+	struct reloc_table *table = NULL;
-+	int obm, reloc_block;
-+
-+	this = (struct nand_chip *)(mtd->priv);
-+	info = (struct monahans_dfc_info *)(this->priv);
-+	obm = calc_obm_ver();
-+	if (obm == MHN_OBM_V3) {
-+		table = &info->table;
-+		if (info->table_init == 0) {
-+			printk(KERN_ERR "Error: the initial relocation \
-+					table can't be read\n");
-+			memset(table, 0, sizeof(struct reloc_table));
-+			table->header = NAND_RELOC_HEADER;
-+			info->table_init = 1;
-+		}
-+		if (table->total == 0) {
-+			/* Point to the first relocated block.
-+			 * It resides in the last block of flash.
-+			 * the relocation entry has calculated in
-+			 * chipsize
-+			 */
-+			reloc_block = (this->chipsize
-+					>> this->phys_erase_shift)
-+					+ NAND_RELOC_MAX - 1;
-+		} else if (table->total < NAND_RELOC_MAX) {
-+			reloc_block = table->reloc[table->total - 1].to - 1;
-+		} else {
-+			printk(KERN_ERR "Relocation table exceed max number, \
-+				cannot mark block 0x%x as bad block\n", block);
-+			return -ENOSPC;
-+		}
-+		/* Make sure that reloc_block is pointing to a valid block */
-+		for (; ; reloc_block--) {
-+			/* The relocate table is full */
-+			if (reloc_block < (this->chipsize
-+					>> this->phys_erase_shift))
-+				return -ENOSPC;
-+			this->cmdfunc(mtd, NAND_CMD_ERASE1, 0, reloc_block
-+					<< (this->phys_erase_shift
-+					- this->page_shift));
-+			if (info->retcode == ERR_NONE)
-+				break;
-+		}
-+		/* Create the relocated block information in the table */
-+		table->reloc[table->total].from = block;
-+		table->reloc[table->total].to = reloc_block;
-+		table->total++;
-+	}
-+	return 0;
-+}
-+
-+/* Write the relocation table back to device, if there's room. */
-+static int sync_rel_table(struct mtd_info *mtd, int *idx)
-+{
-+	struct nand_chip *this = NULL;
-+	struct monahans_dfc_info *info = NULL;
-+	int obm, start_page, len;
-+
-+	if (*idx >= MAX_BBT_SLOTS) {
-+		printk(KERN_ERR "Can't write relocation table to device \
-+				any more.\n");
-+		return -1;
-+	}
-+	if (*idx < 0) {
-+		printk(KERN_ERR "Wrong Slot is specified.\n");
-+		return -1;
-+	}
-+	this = (struct nand_chip *)(mtd->priv);
-+	info = (struct monahans_dfc_info *)(this->priv);
-+	len = 4;
-+	len += info->table.total << 2;
-+	obm = calc_obm_ver();
-+	if (obm == MHN_OBM_V3) {
-+		/* write to device */
-+		start_page = 1 << (this->phys_erase_shift - this->page_shift);
-+		start_page = start_page - 1 - *idx;
-+		memset(&(info->data_buf), 0xFF, BUFLEN);
-+		memcpy(&(info->data_buf), &(info->table), len);
-+
-+		printk(KERN_DEBUG "DUMP relocation table before write. \
-+				page:0x%x\n", start_page);
-+		monahans_df_command(mtd, NAND_CMD_SEQIN, 0, start_page);
-+		monahans_df_command(mtd, NAND_CMD_PAGEPROG, 0, start_page);
-+		/* write to idx */
-+		(*idx)++;
-+		/* dump it */
-+		memset(&(info->data_buf), 0, BUFLEN);
-+		monahans_df_command(mtd, NAND_CMD_READOOB, 0, start_page);
-+		PRINT_BUF(info->data_buf, len);
-+	}
-+	return 0;
-+}
-+
-+
-+/* Find the relocated block of the bad one.
-+ * If it's a good block, return 0. Otherwise, return a relocated one.
-+ * idx points to the next relocation entry
-+ * If the relocated block is bad, an new entry will be added into the
-+ * bottom of the relocation table.
-+ */
-+static unsigned short search_rel_block(int block, struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = NULL;
-+	struct monahans_dfc_info *info = NULL;
-+	struct reloc_table *table = NULL;
-+	int i, max, reloc_block = 0;
-+
-+	this = (struct nand_chip *)(mtd->priv);
-+	info = (struct monahans_dfc_info *)(this->priv);
-+	table = &(info->table);
-+	if ((block <= 0) || (block > this->chipsize)
-+			|| (info->table_init == 0) || (table->total == 0))
-+		return 0;
-+	if (table->total > NAND_RELOC_MAX)
-+		table->total = NAND_RELOC_MAX;
-+	max = table->total;
-+	for (i = 0; i < max; i++) {
-+		if (block == table->reloc[i].from)
-+			reloc_block = table->reloc[i].to;
-+	}
-+	return reloc_block;
-+}
-+
-+/*
-+ * Check whether the block is a bad one.
-+ * At first, it will search the relocation table.
-+ * If necessary, it will search the BBT. Because relocation table can only
-+ * maintain limited record. If there're more bad blocks, they can't be
-+ * recorded in relocation table. They can only be recorded in BBT.
-+ */
-+static int monahans_df_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+{
-+	struct nand_chip *this = NULL;
-+	int page, block, reloc_block, chipnr, res = 0;
-+	u16 bad;
-+
-+	/* At here, we only support one flash chip */
-+	this = (struct nand_chip *)mtd->priv;
-+	block = (int)(ofs >> this->phys_erase_shift);
-+	/* search the block in the relocation table */
-+	reloc_block = search_rel_block(block, mtd);
-+	if (reloc_block) {
-+		ofs = ((reloc_block << this->phys_erase_shift) |
-+			(ofs & ((1 << this->phys_erase_shift) - 1)));
-+	}
-+
-+	/* search BBT
-+	 * Maybe the relocation table is full, but some bad blocks aren't
-+	 * recordered in it.
-+	 * The below code are copied from nand_block_bad().
-+	 */
-+	if (getchip) {
-+		page = (int)(ofs >> this->page_shift);
-+		chipnr = (int)(ofs >> this->chip_shift);
-+
-+		/* Select the NAND chips */
-+		this->select_chip(mtd, chipnr);
-+	} else
-+		page = (int)ofs;
-+
-+	if (this->options & NAND_BUSWIDTH_16) {
-+		this->cmdfunc(mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE,
-+				page & this->pagemask);
-+		bad = cpu_to_le16(this->read_word(mtd));
-+		if (this->badblockpos & 0x1)
-+			bad >>= 1;
-+		if ((bad & 0xFF) != 0xFF)
-+			res = 1;
-+	} else {
-+		this->cmdfunc(mtd, NAND_CMD_READOOB, this->badblockpos,
-+				page & this->pagemask);
-+		if (this->read_byte(mtd) != 0xFF)
-+			res = 1;
-+	}
-+
-+	return res;
-+}
-+
-+static int monahans_df_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+	struct nand_chip *this = NULL;
-+	struct monahans_dfc_info *info = NULL;
-+	unsigned char buf[2] = {0, 0};
-+	int block, reloc_block, page, ret;
-+
-+	this = (struct nand_chip *)mtd->priv;
-+	info = (struct monahans_dfc_info *)(this->priv);
-+	/* Get block number */
-+	block = ((int)ofs) >> this->bbt_erase_shift;
-+	ret = update_rel_table(mtd, block);
-+	if (!ret) {
-+		sync_rel_table(mtd, &(info->current_slot));
-+		return 0;
-+		} else {
-+		reloc_block = search_rel_block(block, mtd);
-+		if (reloc_block)
-+			block = reloc_block;
-+		if (this->bbt)
-+			this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
-+	}
-+
-+	/* Do we have a flash based bad block table ? */
-+	if (this->options & NAND_USE_FLASH_BBT)
-+		return nand_update_bbt(mtd, ofs);
-+
-+	/* mark the bad block flag at the first two pages */
-+	page = block << (this->phys_erase_shift - this->page_shift);
-+	ofs = mtd->writesize + this->badblockpos;
-+	this->cmdfunc(mtd, NAND_CMD_SEQIN, ofs, page);
-+	this->write_buf(mtd, buf, 2);
-+	this->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+	page++;
-+	this->cmdfunc(mtd, NAND_CMD_SEQIN, ofs, page);
-+	this->write_buf(mtd, buf, 2);
-+	this->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+	return 0;
-+}
-+
-+static int dump_bbt_flash(struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = NULL;
-+	struct monahans_dfc_info *info = NULL;
-+	int block, page, totlen;
-+
-+	this = (struct nand_chip *)mtd->priv;
-+	info = (struct monahans_dfc_info *)this->priv;
-+	block = (this->chipsize >> this->phys_erase_shift) - 1;
-+	totlen = (this->chipsize >> this->phys_erase_shift) >> 2;
-+	printk(KERN_ERR "totlen:0x%x\n", totlen);
-+	this->select_chip(mtd, 0);
-+	if (this->bbt_td) {
-+		printk(KERN_ERR "BBT page:0x%x\n", this->bbt_td->pages[0]);
-+		page = this->bbt_td->pages[0];
-+		if (this->bbt_td->pages[0] <= 0) {
-+			page = block << (this->phys_erase_shift
-+				- this->page_shift);
-+		}
-+		while (totlen > 0) {
-+			printk(KERN_ERR "page:0x%x\n", page);
-+			monahans_df_command(mtd, NAND_CMD_READ0, 0, page);
-+			printk(KERN_ERR "read result:0x%x\n", info->retcode);
-+			PRINT_BUF(info->data_buf, BUFLEN);
-+			totlen -= (1 << this->page_shift);
-+			page++;
-+		}
-+	}
-+	if (this->bbt_md) {
-+		printk(KERN_ERR "BBT page:0x%x\n", this->bbt_md->pages[0]);
-+		page = this->bbt_md->pages[0];
-+		if (this->bbt_td->pages[0] <= 0) {
-+			page = block << (this->phys_erase_shift
-+				- this->page_shift);
-+			}
-+		while (totlen > 0) {
-+			printk(KERN_ERR "page:0x%x\n", page);
-+			monahans_df_command(mtd, NAND_CMD_READ0, 0, page);
-+			printk(KERN_ERR "read result:0x%x\n", info->retcode);
-+			PRINT_BUF(info->data_buf, BUFLEN);
-+			totlen -= (1 << this->page_shift);
-+			page++;
-+		}
-+
-+	}
-+	return 0;
-+}
-+
-+static int dump_bbt_mem(struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = NULL;
-+
-+	this = (struct nand_chip *)mtd->priv;
-+	PRINT_BUF(this->bbt, 225);
-+	return 0;
-+}
-+
-+static int monahans_df_scan_bbt(struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = NULL;
-+	int ret;
-+
-+	this = (struct nand_chip *)mtd->priv;
-+	ret = read_reloc_table(mtd);
-+	if (ret) {
-+		printk(KERN_ERR "Failed to get relocation table\n");
-+		printk(KERN_ERR "Try to build a new BBT. It may result \
-+				unpredicated error.\n");
-+		/* Create new memory based and flash based BBT */
-+	}
-+	nand_scan_bbt(mtd, &monahans_bbt_default);
-+	//dump_bbt_flash(mtd);
-+	dump_bbt_mem(mtd);
-+	return 0;
-+#if 0
-+	/* Read flashed based BBT from device */
-+	return (nand_scan_bbt(mtd, &monahans_bbt_main));
-+#endif
-+}
-+
-+
-+static int monahans_df_probe(struct platform_device *pdev)
-+{
-+	struct nand_chip *this;
-+	struct monahans_dfc_info *info;
-+	int status = -1;
-+	unsigned int data_buf_len;
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+	unsigned int buf_len;
-+#endif
-+	int i, ret = 0;
-+
-+	printk(KERN_ERR "Nand driver probe\n");
-+
-+	dfc_context.membase = ioremap_nocache(0x43100000, 0x100000);
-+	if (!dfc_context.membase)
-+		printk(KERN_ERR "Couldn't ioremap\n");
-+
-+	pxa_set_cken(CKEN_NAND, 1);
-+
-+	for (i = DFC_FLASH_NULL + 1; i < DFC_FLASH_END; i++)
-+	{
-+		uint32_t id;
-+
-+		status = dfc_init(&dfc_context, i);
-+		if (status)
-+			continue;
-+		status = dfc_readid(&dfc_context, &id);
-+		if (status)
-+			continue;
-+		printk(KERN_DEBUG "id:0x%x, chipid:0x%x\n",
-+			id, dfc_context.flash_info->chip_id);
-+		if (id == dfc_context.flash_info->chip_id)
-+			break;
-+	}
-+
-+	if(i == DFC_FLASH_END) {
-+		printk(KERN_ALERT "Monahans NAND device:"
-+			"Nand Flash initialize failure!\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+	flash_config = i;
-+
-+	monahans_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip) +
-+			sizeof(struct monahans_dfc_info) , GFP_KERNEL);
-+	if (!monahans_mtd) {
-+		printk (KERN_ERR "Monahans NAND device:"
-+			"Unable to allocate NAND MTD device structure.\n");
-+		ret = -ENOMEM;
-+		goto out;
-+        }
-+
-+	/* Get pointer to private data */
-+	this = (struct nand_chip *)((void *)monahans_mtd + sizeof(struct mtd_info));
-+	info = (struct monahans_dfc_info *)((void *)this + sizeof(struct nand_chip));
-+	dfc_context.mtd = monahans_mtd;
-+
-+	monahans_mtd->priv = this;
-+	this->priv = info;
-+	data_buf_len = dfc_context.flash_info->page_size +
-+		dfc_context.flash_info->oob_size;
-+	info->state = STATE_READY;
-+	init_completion(&info->cmd_complete);
-+	info->table_init = 0;
-+	memset(&info->table, 0x0, sizeof(struct reloc_table));
-+	printk(KERN_DEBUG "%s: this->controller: 0x%x, &this->controller: 0x%x\n",__func__, (unsigned int)this->controller, (unsigned int)&(this->controller));
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+	info->dma_mask = 0xffffffffUL;
-+
-+	dev->dma_mask = &info->dma_mask;
-+	dev->coherent_dma_mask = 0xffffffffUL;
-+
-+	/* alloc dma data buffer for data
-+	 * buffer + 2*descriptor + command buffer
-+	 */
-+	buf_len = ALIGN(2*sizeof(struct pxa_dma_desc), 32) +
-+		ALIGN(data_buf_len, 32) + ALIGN(NAND_CMD_DMA_LEN, 32);
-+
-+	printk(KERN_INFO "Try to allocate dma buffer(len:%d)"
-+		"for data buffer + 2*descriptor + command buffer\n", buf_len);
-+	info->data_desc = (struct pxa_dma_desc*)dma_alloc_writecombine(dev,
-+			buf_len, &info->data_desc_addr, GFP_KERNEL);
-+	if (!info->data_desc) {
-+		printk(KERN_ERR "Monahans NAND device:"
-+			"Unable to alloc dma buffer\n");
-+		ret = -ENOMEM;
-+		goto free_mtd;
-+	}
-+
-+	info->cmd_desc = (struct pxa_dma_desc*)((char *)info->data_desc +
-+			sizeof(struct pxa_dma_desc));
-+	info->cmd_desc_addr = (dma_addr_t)((char *)info->data_desc_addr +
-+			sizeof(struct pxa_dma_desc));
-+	info->data_buf = (char *)info->data_desc +
-+		ALIGN(2*sizeof(struct pxa_dma_desc), 32);
-+	info->data_buf_addr = (dma_addr_t)((char *)info->data_desc_addr +
-+		ALIGN(2*sizeof(struct pxa_dma_desc), 32));
-+	info->cmd_buf = (char *)info->data_buf + ALIGN(data_buf_len, 32);
-+	info->cmd_buf_addr = (dma_addr_t)((char *)info->data_buf_addr +
-+			ALIGN(data_buf_len, 32));
-+
-+	D1(printk("Get dma buffer for data dma descriptor, virt:0x%x, phys0x:%x\n",
-+		(unsigned int)info->data_desc, info->data_desc_addr));
-+	D1(printk("Get dma buffer for command dma descriptors, virt:0x%x,"
-+		"phys0x:%x\n", (unsigned int)info->cmd_desc, info->cmd_desc_addr));
-+	D1(printk("Get dma buffer for data, virt:0x%x, phys0x:%x\n",
-+		(unsigned int)info->data_buf, info->data_buf_addr));
-+	D1(printk("Get dma buffer for command, virt:0x%x, phys0x:%x\n",
-+		(unsigned int)info->cmd_buf, info->cmd_buf_addr));
-+
-+	D1(printk("Try to allocate dma channel for data\n"));
-+
-+	info->data_dma = pxa_request_dma("NAND DATA", DMA_PRIO_LOW,
-+			monahans_dfc_data_dma_irq, info);
-+	if (info->data_dma < 0) {
-+		printk(KERN_ERR "Monahans NAND device:"
-+			"Unable to alloc dma channel for data\n");
-+		ret = info->data_dma;
-+		goto free_buf;
-+	}
-+	D1(printk("Get dma channel:%d for data\n", info->data_dma));
-+
-+	D1(printk("Try to allocate dma channel for command\n"));
-+	info->cmd_dma = pxa_request_dma("NAND CMD", DMA_PRIO_LOW,
-+			monahans_dfc_cmd_dma_irq, info);
-+	if (info->cmd_dma < 0) {
-+		printk(KERN_ERR "Monahans NAND device:"
-+			"Unable to alloc dma channel for command\n");
-+		ret = info->cmd_dma;
-+		goto free_data_dma;
-+	}
-+	D1(printk("Get dma channel:%d for command\n", info->cmd_dma));
-+
-+	dfc_context.cmd_dma_ch  = info->cmd_dma;
-+	dfc_context.data_dma_ch = info->data_dma;
-+#else
-+	printk(KERN_DEBUG "Try to allocate data buffer(len:%d)\n", data_buf_len);
-+	info->data_buf = kmalloc(data_buf_len, GFP_KERNEL);
-+	if (!info->data_buf) {
-+		printk(KERN_ERR "Monahans NAND device:"
-+			"Unable to alloc data buffer\n");
-+		ret = -ENOMEM;
-+		goto free_mtd;
-+	}
-+#endif
-+
-+	D1(printk("Try to request irq:%d\n", IRQ_NAND));
-+	ret = request_irq(IRQ_NAND, monahans_dfc_irq, 0, pdev->name, info);
-+	if (ret < 0) {
-+		printk(KERN_ERR "Monahans NAND device: Unable to request irq\n");
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+		goto free_cmd_dma;
-+#else
-+		goto free_buf;
-+#endif
-+	}
-+
-+	D1(printk("Success request irq\n"));
-+
-+	/* set address of NAND IO lines */
-+	this->options = (dfc_context.flash_info->flash_width == 16)? \
-+			NAND_BUSWIDTH_16: 0 | NAND_USE_FLASH_BBT;
-+
-+	/* this->IO_ADDR_R = this->IO_ADDR_W = NDDB */
-+	this->waitfunc = monahans_df_waitfunc;
-+	this->select_chip = monahans_df_select_chip;
-+	this->dev_ready = monahans_df_dev_ready;
-+	this->cmdfunc = monahans_df_command;
-+	this->read_word= monahans_df_read_word;
-+	/*this->write_word= monahans_df_write_word;*/
-+	this->read_byte = monahans_df_read_byte;
-+	this->read_buf = monahans_df_read_buf;
-+	this->write_buf = monahans_df_write_buf;
-+	this->verify_buf = monahans_df_verify_buf;
-+	this->ecc.hwctl = monahans_df_enable_hwecc;
-+	this->ecc.calculate = monahans_df_calculate_ecc;
-+	this->ecc.correct = monahans_df_correct_data;
-+	this->block_bad = monahans_df_block_bad;
-+	this->block_markbad = monahans_df_block_markbad;
-+	this->scan_bbt = monahans_df_scan_bbt;
-+	this->chip_delay= 25;
-+	this->bbt_td = &monahans_bbt_main;
-+	this->bbt_md = &monahans_bbt_mirror;
-+
-+	/* If the NAND flash is small block flash, only 512-byte pagesize
-+	 * is supported.
-+	 * Adjust parameters of BBT what is depended on large block nand
-+	 * flash or small block nand flash.
-+	 */
-+	if (dfc_context.flash_info->oob_size > 16) {
-+		this->ecc.layout = &monahans_lb_nand_oob;
-+		this->ecc.mode = NAND_ECC_HW;
-+		this->ecc.size = 2048;
-+		this->ecc.bytes = 24;
-+		this->bbt_td->offs = 2;
-+		this->bbt_td->veroffs = 6;
-+		this->bbt_md->offs = 2;
-+		this->bbt_md->veroffs = 6;
-+		this->badblockpos = NAND_LARGE_BADBLOCK_POS;
-+		monahans_bbt_default.offs = NAND_LARGE_BADBLOCK_POS;
-+		monahans_bbt_default.len = 2;
-+		/* when scan_bbt() is executed, bbt version can get */
-+		monahans_bbt_default.veroffs = 2;
-+	} else {
-+		this->ecc.layout = &monahans_sb_nand_oob;
-+		this->ecc.mode = NAND_ECC_HW;
-+		this->ecc.size = 512;
-+		this->ecc.bytes = 6;
-+		this->bbt_td->offs = 8;
-+		this->bbt_td->veroffs = 12;
-+		this->bbt_md->offs = 8;
-+		this->bbt_md->veroffs = 12;
-+		this->badblockpos = NAND_SMALL_BADBLOCK_POS;
-+		monahans_bbt_default.offs = NAND_SMALL_BADBLOCK_POS;
-+		monahans_bbt_default.len = 1;
-+		monahans_bbt_default.veroffs = 8;
-+	}
-+
-+	info->context = &dfc_context;
-+	/* TODO: allocate dma buffer and channel */
-+
-+	platform_set_drvdata(pdev, monahans_mtd);
-+
-+	if (nand_scan(monahans_mtd, 1)) {
-+		printk(KERN_ERR "Nand scan failed\n");
-+		ret = -ENXIO;
-+		goto free_irq;
-+	}
-+
-+	/* There is a potential limitation that no more partition can be
-+	 * added between MassStorage and BBT(last block).
-+	 *
-+	 * The last 127 blocks is reserved for relocation table, they aren't
-+	 * statistical data of mtd size and chip size.
-+	 *
-+	 * BBT partitions contains 4 blocks. Two blocks are used to store
-+	 * main descriptor, the other two are used to store mirror descriptor.
-+	 */
-+	partition_info[PART_NUM - 1].size = (monahans_bbt_main.maxblocks
-+					+ monahans_bbt_mirror.maxblocks)
-+					<< this->phys_erase_shift;
-+	partition_info[PART_NUM - 1].offset = this->chipsize
-+					- partition_info[PART_NUM - 1].size;
-+	partition_info[PART_NUM - 2].offset = partition_info[PART_NUM - 3].offset
-+					+ partition_info[PART_NUM - 3].size;
-+	partition_info[PART_NUM - 2].size = this->chipsize
-+					- partition_info[PART_NUM - 2].offset
-+					- partition_info[PART_NUM - 1].size;
-+	add_mtd_partitions(monahans_mtd, partition_info, PART_NUM);
-+
-+#ifdef CONFIG_DVFM
-+        dvfm_notifier.client_data = info;
-+        mhn_fv_register_notifier(&dvfm_notifier);
-+#endif
-+
-+	return 0;
-+
-+free_irq:
-+	free_irq(IRQ_NAND, info);
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+free_cmd_dma:
-+	pxa_free_dma(info->cmd_dma);
-+free_data_dma:
-+	pxa_free_dma(info->data_dma);
-+free_buf:
-+	dma_free_writecombine(dev, buf_len, info->data_desc, info->data_desc_addr);
-+#else
-+free_buf:
-+	kfree(info->data_buf);
-+#endif
-+free_mtd:
-+	kfree(monahans_mtd);
-+out:
-+	return ret;
-+
-+}
-+
-+static int __devexit monahans_df_remove(struct platform_device *dev)
-+{
-+	struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(dev);
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+			(((struct nand_chip *)(mtd->priv))->priv);
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+	unsigned int data_buf_len = dfc_context.flash_info->page_size +
-+			dfc_context.flash_info->oob_size;
-+	unsigned int buf_len = ALIGN(2*sizeof(struct pxa_dma_desc), 32) +
-+			ALIGN(data_buf_len, 32) + ALIGN(NAND_CMD_DMA_LEN, 32);
-+#endif
-+
-+#ifdef CONFIG_DVFM
-+        mhn_fv_unregister_notifier(&dvfm_notifier);
-+#endif
-+
-+	platform_set_drvdata(dev, NULL);
-+
-+	del_mtd_device(mtd);
-+	del_mtd_partitions(mtd);
-+	free_irq(IRQ_NAND, info);
-+#ifdef CONFIG_MTD_NAND_MONAHANS_DMA
-+	pxa_free_dma(info->cmd_dma);
-+	pxa_free_dma(info->data_dma);
-+	dma_free_writecombine(dev, buf_len, info->data_desc,
-+		info->data_desc_addr);
-+#else
-+	kfree(info->data_buf);
-+#endif
-+	kfree(mtd);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int monahans_df_suspend(struct platform_device *dev, pm_message_t state, u32 level)
-+{
-+	struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(dev);
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+			(((struct nand_chip *)(mtd->priv))->priv);
-+
-+	if( SUSPEND_DISABLE == level){ /*SUSPEND_NOTIFY*/
-+		if (info->state != STATE_READY) {
-+			printk(KERN_ERR "current state is %d\n", info->state);
-+			return -EAGAIN;
-+		}
-+		info->state = STATE_SUSPENDED;
-+		/*
-+		 * The PM code need read the mobm from NAND.
-+		 * So the NAND clock can't be stop here.
-+		 * The PM code will cover this.
-+		 */
-+		/* pxa_set_cken(CKEN_NAND, 0); */
-+	}
-+	return 0;
-+}
-+
-+static int monahans_df_resume(struct platform_device *dev, u32 level)
-+{
-+	struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(dev);
-+	struct monahans_dfc_info *info = (struct monahans_dfc_info *)
-+			(((struct nand_chip *)(mtd->priv))->priv);
-+	int status;
-+
-+	if(RESUME_ENABLE == level){
-+		if (info->state != STATE_SUSPENDED)
-+			printk(KERN_WARNING "Error State after resume back\n");
-+
-+		info->state = STATE_READY;
-+
-+		pxa_set_cken(CKEN_NAND, 1);
-+
-+		status = dfc_init(&dfc_context, flash_config);
-+		if (status) {
-+			printk(KERN_ALERT "Monahans NAND device:"
-+				"Nand Flash initialize failure!\n");
-+			return -ENXIO;
-+		}
-+	}
-+	return 0;
-+}
-+#endif
-+
-+#ifdef CONFIG_DVFM
-+static int mhn_nand_dvfm_notifier(unsigned cmd, void *client_data, void *info)
-+{
-+	struct monahans_dfc_info *dfc_info =
-+			(struct monahans_dfc_info *)client_data;
-+
-+	switch (cmd) {
-+	case FV_NOTIFIER_QUERY_SET :
-+		if (dfc_info->state != STATE_READY)
-+			return -1;
-+		break;
-+
-+	case FV_NOTIFIER_PRE_SET :
-+		break;
-+
-+	case FV_NOTIFIER_POST_SET :
-+		break;
-+	}
-+
-+	return 0;
-+}
-+#endif
-+
-+static struct platform_driver monahans_df_driver = {
-+	.probe		= monahans_df_probe,
-+	.remove		= __devexit_p(monahans_df_remove),
-+#ifdef CONFIG_PM
-+	.suspend	= monahans_df_suspend,
-+	.resume		= monahans_df_resume,
-+#endif
-+	.driver		= {
-+		.name		= "monahans-nand-flash",
-+	}
-+};
-+
-+static void __exit monahans_df_cleanup(void)
-+{
-+	printk(KERN_ERR "Nand driver registered\n");
-+	platform_driver_unregister(&monahans_df_driver);
-+}
-+
-+static int __init monahans_df_init(void)
-+{
-+	return platform_driver_register(&monahans_df_driver);
-+}
-+
-+module_init(monahans_df_init);
-+module_exit(monahans_df_cleanup);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jingqing.xu (jingqing.xu@intel.com)");
-+MODULE_DESCRIPTION("Glue logic layer for NAND flash on monahans DFC");
-+
-+
-Index: linux-2.6.23/arch/arm/mach-pxa/zylonite.c
-===================================================================
---- linux-2.6.23.orig/arch/arm/mach-pxa/zylonite.c	2008-02-13 00:59:45.000000000 +0000
-+++ linux-2.6.23/arch/arm/mach-pxa/zylonite.c	2008-02-13 09:11:02.000000000 +0000
-@@ -29,6 +29,8 @@
- #include "generic.h"
- 
- int gpio_backlight;
-+int gpio_vsync;
-+int gpio_vsync1;
- int gpio_eth_irq;
- 
- int lcd_id;
-@@ -54,6 +56,16 @@
- 	.resource	= smc91x_resources,
- };
- 
-+static struct platform_device nand_device = {
-+	.name		= "monahans-nand-flash",
-+	.id		= -1,
-+};
-+
-+static struct platform_device touch_device = {
-+	.name		= "pxa2xx-touch",
-+	.id		= -1,
-+};
-+
- #if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
- static void zylonite_backlight_power(int on)
- {
-@@ -96,7 +108,7 @@
- };
- 
- static struct pxafb_mode_info sharp_ls037_modes[] = {
--	[0] = {
-+	[1] = {
- 		.pixclock	= 158000,
- 		.xres		= 240,
- 		.yres		= 320,
-@@ -109,8 +121,8 @@
- 		.lower_margin	= 3,
- 		.sync		= 0,
- 	},
--	[1] = {
--		.pixclock	= 39700,
-+	[0] = {
-+		.pixclock	= 45000,
- 		.xres		= 480,
- 		.yres		= 640,
- 		.bpp		= 16,
-@@ -137,6 +149,11 @@
- 	/* backlight GPIO: output, default on */
- 	gpio_direction_output(gpio_backlight, 1);
- 
-+	gpio_direction_output(gpio_vsync, 0);
-+	gpio_direction_output(gpio_vsync1, 0);
-+
-+	printk(KERN_ERR "LCD ID is %x\n", lcd_id);
-+
- 	if (lcd_id & 0x20) {
- 		set_pxa_fb_info(&zylonite_sharp_lcd_info);
- 		return;
-@@ -169,6 +186,8 @@
- 	smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
- 	smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
- 	platform_device_register(&smc91x_device);
-+	platform_device_register(&nand_device);
-+	platform_device_register(&touch_device);
- 
- 	zylonite_init_lcd();
- }
-Index: linux-2.6.23/arch/arm/mach-pxa/zylonite_pxa300.c
-===================================================================
---- linux-2.6.23.orig/arch/arm/mach-pxa/zylonite_pxa300.c	2008-02-13 00:59:45.000000000 +0000
-+++ linux-2.6.23/arch/arm/mach-pxa/zylonite_pxa300.c	2008-02-13 14:01:13.000000000 +0000
-@@ -62,12 +62,12 @@
- 	GPIO110_UART3_RXD,
- 
- 	/* AC97 */
--	GPIO23_AC97_nACRESET,
-+	/*GPIO23_AC97_nACRESET,
- 	GPIO24_AC97_SYSCLK,
- 	GPIO29_AC97_BITCLK,
- 	GPIO25_AC97_SDATA_IN_0,
- 	GPIO27_AC97_SDATA_OUT,
--	GPIO28_AC97_SYNC,
-+	GPIO28_AC97_SYNC,*/
- 
- 	/* Keypad */
- 	GPIO107_KP_DKIN_0,
-@@ -104,6 +104,41 @@
- 	/* Ethernet */
- 	GPIO2_nCS3,
- 	GPIO99_GPIO,
-+
-+	/* NAND */
-+	MFP_CFG_X(DF_INT_RnB, AF0, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nRE_nOE, AF1, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nWE, AF1, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_CLE_nOE, AF0, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nADV1_ALE, AF1, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nCS0, AF1, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_nCS1, AF0, DS10X, PULL_LOW),
-+	MFP_CFG_X(DF_IO0, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO1, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO2, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO3, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO4, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO5, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO6, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO7, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO8, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO9, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO10, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO11, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO12, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO13, AF1, DS08X, PULL_LOW),
-+	MFP_CFG_X(DF_IO14, AF1, DS08X, PULL_LOW),
-+
-+	/* AC97 */
-+	MFP_CFG_X(GPIO23, AF1, DS03X, PULL_LOW),
-+	MFP_CFG_X(GPIO27, AF1, DS03X, PULL_LOW),
-+	MFP_CFG_X(GPIO28, AF1, DS03X, PULL_LOW),
-+	MFP_CFG_X(GPIO29, AF1, DS03X, PULL_LOW),
-+	MFP_CFG_X(GPIO25, AF1, DS03X, PULL_LOW),
-+
-+	MFP_CFG_X(GPIO26, AF0, DS01X, PULL_LOW), /* Interrupt */
-+	MFP_CFG_X(GPIO24, AF0, DS03X, PULL_LOW), /*SYSCLK external */
-+	MFP_CFG_X(GPIO11, AF0, DS01X, PULL_LOW),
- };
- 
- static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
-@@ -163,6 +198,9 @@
- 		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
- }
- 
-+extern int gpio_vsync;
-+extern int gpio_vsync1;
-+
- void __init zylonite_pxa300_init(void)
- {
- 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-@@ -174,6 +212,8 @@
- 
- 		/* GPIO pin assignment */
- 		gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
-+		gpio_vsync = mfp_to_gpio(GPIO76_LCD_VSYNC);
-+		gpio_vsync1 = mfp_to_gpio(GPIO71_LCD_LDD_17);
- 	}
- 
- 	if (cpu_is_pxa300()) {
-Index: linux-2.6.23/drivers/video/pxafb.c
-===================================================================
---- linux-2.6.23.orig/drivers/video/pxafb.c	2008-02-13 00:59:45.000000000 +0000
-+++ linux-2.6.23/drivers/video/pxafb.c	2008-02-13 00:59:45.000000000 +0000
-@@ -1543,9 +1543,9 @@
-         if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-                 dev_warn(&dev->dev, "machine LCCR0 setting contains illegal bits: %08x\n",
-                         inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
--        if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
--                dev_warn(&dev->dev, "machine LCCR3 setting contains illegal bits: %08x\n",
--                        inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
-+        //if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-+        //        dev_warn(&dev->dev, "machine LCCR3 setting contains illegal bits: %08x\n",
-+        //                inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
-         if (inf->lccr0 & LCCR0_DPD &&
- 	    ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
- 	     (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
-Index: linux-2.6.23/include/asm-arm/arch-pxa/mfp-pxa300.h
-===================================================================
---- linux-2.6.23.orig/include/asm-arm/arch-pxa/mfp-pxa300.h	2008-02-13 00:59:45.000000000 +0000
-+++ linux-2.6.23/include/asm-arm/arch-pxa/mfp-pxa300.h	2008-02-13 00:59:45.000000000 +0000
-@@ -175,13 +175,13 @@
- #define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
- #define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
- #define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
--#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-+#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF0, DS01X)
- #define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
- #define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
- #define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
- #define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS01X)
- #define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
--#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
-+#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF0, DS01X)
- 
- #define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
- #define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
diff --git a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_touch-r0.patch b/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_touch-r0.patch
deleted file mode 100644
index 1c00696051..0000000000
--- a/packages/kexecboot/linux-kexecboot-2.6.26/zylonite_touch-r0.patch
+++ /dev/null
@@ -1,1548 +0,0 @@
-Index: linux-2.6.23/drivers/input/touchscreen/Kconfig
-===================================================================
---- linux-2.6.23.orig/drivers/input/touchscreen/Kconfig	2008-02-13 01:12:29.000000000 +0000
-+++ linux-2.6.23/drivers/input/touchscreen/Kconfig	2008-02-13 01:13:20.000000000 +0000
-@@ -54,6 +54,12 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called corgi_ts.
- 
-+config TOUCHSCREEN_ZYLONITE
-+	tristate "Zylonite touchscreen driver"
-+	default y
-+	help
-+	  Say Y here for the Zylonite touchscreen driver
-+
- config TOUCHSCREEN_FUJITSU
- 	tristate "Fujitsu serial touchscreen"
- 	select SERIO
-Index: linux-2.6.23/drivers/input/touchscreen/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/input/touchscreen/Makefile	2008-02-13 01:12:29.000000000 +0000
-+++ linux-2.6.23/drivers/input/touchscreen/Makefile	2008-02-13 01:13:38.000000000 +0000
-@@ -19,3 +19,4 @@
- obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
- obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
- obj-$(CONFIG_TOUCHSCREEN_TSC2101)	+= tsc2101_ts.o
-+obj-$(CONFIG_TOUCHSCREEN_ZYLONITE)	+= zylonite-ts.o
-Index: linux-2.6.23/drivers/input/touchscreen/zylonite-ts.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/drivers/input/touchscreen/zylonite-ts.c	2008-02-13 16:19:15.000000000 +0000
-@@ -0,0 +1,1517 @@
-+/*
-+ *  drivers/input/touchscreen/mhn_audio_touch.c.
-+ *
-+ *  Author:	bridge.wu@marvell.com
-+ *  Created:	Nov 17, 2006
-+ *  Copyright:	Marvell Corporation.
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ */
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/initval.h>
-+
-+#include <asm/semaphore.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/mfp.h>
-+//#include <asm/arch/ipmc.h>
-+#include <linux/suspend.h>
-+#include <linux/spinlock.h>
-+
-+//#include <asm/arch/codec/acodec.h>
-+//#include <asm/arch/mhn_audio_plat.h>
-+
-+#define OSCC               __REG(0x41350000)  /* Oscillator Configuration Register */
-+#define AC97_DIV	__REG(0x41340014)
-+
-+#define ALSA_ZY_CARD_DEBUG
-+#undef ALSA_ZY_CARD_DEBUG
-+
-+#define WM_9713_ID  0x4C13 /* this should be the 7E register value */
-+
-+#ifdef ALSA_ZY_CARD_DEBUG
-+#define dbg(format, arg...) printk(KERN_DEBUG format, ##arg)
-+#else
-+#define dbg(format, arg...)
-+#endif
-+
-+#define DEBUG
-+#undef DEBUG
-+#ifdef DEBUG
-+unsigned int start_time;
-+unsigned int end_time;
-+unsigned int time;
-+#define PRINT_TIME() do {\
-+        time = ((end_time > start_time))?\
-+                (end_time - start_time)*100/325:\
-+                (0xffffffff - start_time + end_time)*100/325;\
-+        printk("\n%s:%dus\n", __FUNCTION__, time);\
-+} while(0)
-+#endif
-+
-+
-+
-+
-+/* 9713 specific
-+ *	Register Name			Index
-+ */
-+#define RESET				0X00
-+#define SPEAKER_VOLUME 			0X02
-+#define HEADPHONE_VOLUME		0X04
-+#define OUT3_OUT4_VOLUME  		0X06
-+#define MONOVOL_MONOINPGA_ROUTE		0X08
-+#define LINE_IN_PGA_VOL_ROUTE		0X0A
-+#define DAC_PGA_VOL_ROUTE		0X0C
-+#define MIC_PGA_VOLUME			0X0E
-+#define MIC_ROUTING			0X10
-+#define REC_PGA_VOL			0X12
-+#define REC_ROUTE_MUX_SEL		0X14
-+#define PCBEEP_VOL_ROUTE		0X16
-+#define VXDAC_VOLUME_ROUTE		0X18
-+#define AUX_DAC_VOL_ROUTE		0X1A
-+#define OUTPUT_PGA_MUX			0X1C
-+#define DAC_3D_CTRL_INV_MUX_SEL		0X1E
-+#define DAC_TONE_CTRL			0X20
-+#define MIC_BIAS			0X22
-+#define OUTPUT_VOL_MAPPING_JACK		0X24
-+#define POWERDOWN_CTRL_STAT		0X26
-+#define EXTENDED_AUD_ID			0X28
-+#define EXTENDED_AUD_STAT_CTRL  	0X2A
-+#define AUDIO_DAC_RATE			0X2C
-+#define AUX_DAC_RATE			0X2E
-+#define AUDIO_ADC_RATE			0X32
-+#define PCM_CODEC_CTRL			0X36
-+#define SPDIF_CTRL			0X3A
-+#define POWER_DOWN_1			0X3C
-+#define POWER_DOWN_2			0X3E
-+#define GENERAL_PURPOSE_WM_13		0X40
-+#define FAST_POWERUP_CTRL		0X42
-+#define MCLK_PLL_CTRL_1			0X44
-+#define MCLK_PLL_CTRL_2			0X46
-+#define GPIO_PIN_CFG			0X4C
-+#define GPIO_PIN_POL_TYPE		0X4E
-+#define GPIO_PIN_STICKY 		0X50
-+#define GPIO_PIN_WAKEUP			0X52
-+#define GPIO_PIN_STATUS			0X54
-+#define GPIO_PIN_SHARING		0X56
-+#define GPIO_PULL_UP_DOWN_CTRL		0X58
-+#define ADD_FUNC_1         		0X5A
-+#define ADD_FUNC_2        		0X5C
-+#define ALC_CTRL         		0X60
-+#define ALC_NOISE_GATE_CTRL		0X62
-+#define AUX_DAC_INPUT_CTRL 		0X64
-+#define TEST_REG_1 			0X68
-+#define TEST_REG_2 			0X6A
-+#define TEST_REG_3 			0X6C
-+#define TEST_REG_4 			0X6E
-+#define DIGITIZER_1_WM13	    	0x74
-+#define DIGITIZER_2_WM13	    	0x76
-+#define DIGITIZER_3_WM13	    	0x78
-+#define DIGITIZER_READ_BACK	    	0x7a
-+#define VENDOR_ID1	  		0x7c
-+#define VENDOR_ID2	  		0x7e
-+
-+#define ZY_TOUCH_SAMPLE_X 1
-+#define ZY_TOUCH_SAMPLE_Y 2
-+
-+#define ZY_EVENT_TYPE_NONE			0
-+#define ZY_EVENT_TYPE_PDN			1
-+
-+
-+typedef enum _zy_acodec_error_t {
-+    ZY_ACODEC_SUCCESS = 0,    /* successful completion of a function */
-+    ZY_ACODEC_GENERAL_SW_ERR, /* null pointer to registers or other software error */
-+    ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT, /* time-out for waiting for respponse */
-+    ZY_ACODEC_SAMPLERATE_NOT_SUPPORTED, /* the sample rate is not supported either in controller or codec */
-+    ZY_ACODEC_FEATURE_NO_SUPPORTED, /* this codec feature is not supported  */
-+    ZY_ACODEC_GENERAL_HW_ERR ,/* other hardware error besides time out */
-+    ZY_ACODEC_ROUTE_NO_SUPPORTED, /* the codec can not set the route required */
-+    ZY_ACODEC_SLEEP /* the codec is sleep */
-+} zy_acodec_error_t;
-+
-+typedef unsigned int zy_acodec_device_id_t;
-+
-+typedef enum _codec_state {
-+	ZY_CODEC_SLEEP  = 0,
-+	ZY_CODEC_WAKEUP = 1
-+} acodec_state_t;
-+
-+typedef enum {
-+       ZY_FM = 0,
-+       ZY_MIC1 = 1,
-+       ZY_MIC2 = 2,
-+       ZY_SPEAKER =3,
-+       ZY_HEADSET =4,
-+       ZY_HANDSET =5,
-+} vol_port_type_t;
-+
-+typedef struct _context_t {
-+	int  use_count; 		/* probe/remove and suspend/resume usage count, sync among multiple devices */
-+	zy_acodec_device_id_t acodec_id;/* - an ID that uniquely identifies the codec to be used */
-+	unsigned long init_number; 	/* used by driver to track whether it is inited or not */
-+
-+	void *p_voice_reg;       	/* pointer to Monahans registers that has PCM interface to codec */
-+	void *p_hifi_reg;        	/* pointer to Monahans registers that has hifi interface to codec */
-+	void *p_ctrl_reg;        	/* pointer to Monahans registers that has control interface to codec */
-+	int  *p_ost_regs;		/* needed for time out */
-+	void *p_save_memory;        	/* pointer to a memory region to save context while suspend */
-+    	void *p_zy_scenario;        	/* pointer to the scenario data structure  */
-+    	long u_max_read_write_time_out_ms;/* input the max time to wait in milliseconds before giving up on a read or write operation */
-+	long u_max_setup_time_out_ms;	/* input the maximum time in milliseconds to wait during initial setup of the ACODEC controller and codec */
-+
-+	/* member functions these pointers must be set by */
-+	zy_acodec_error_t (* g_pfn_codec_specific_init)      (struct _context_t *p_device_context);
-+	zy_acodec_error_t (* g_pfn_codec_specific_dinit)    (struct _context_t *p_device_context);
-+	zy_acodec_error_t (* g_pfn_acodec_read)             (struct _context_t *p_dev_context, unsigned short reg_addr, unsigned short *p_reg_value);
-+	zy_acodec_error_t (* g_pfn_acodec_write)            (struct _context_t *p_dev_context, unsigned short reg_addr, unsigned short reg_value);
-+
-+	/* add for route */
-+	zy_acodec_error_t (* g_pfn_set_route)           (struct _context_t *p_device_context, unsigned short * rout_map ,unsigned short* current_map);
-+	/* add for sleep the codec */
-+	zy_acodec_error_t (* g_pfn_sleep_codec)           (struct _context_t *p_device_context);
-+	/* add for Wake up the codec */
-+	zy_acodec_error_t (* g_pfn_wake_codec)           (struct _context_t *p_device_context);
-+	/* add for get codec state */
-+	zy_acodec_error_t (* g_pfn_get_state)           (struct _context_t *p_device_context, acodec_state_t *p_state);
-+	/* add for volume */
-+	zy_acodec_error_t (* g_pfn_get_vol)(struct _context_t *p_device_context, vol_port_type_t port,  unsigned short *gain_in_db);
-+	zy_acodec_error_t (* g_pfn_set_vol)(struct _context_t *p_device_context, vol_port_type_t port,  unsigned short gain_in_db);
-+
-+        void (* g_pfn_get_event)(struct _context_t *p_device_context, unsigned char * event_type);
-+        void (* g_pfn_event_ack)(struct _context_t *p_device_context, unsigned char event_type);
-+        zy_acodec_error_t (* g_pfn_enable_touch)(struct _context_t *p_device_context);
-+        zy_acodec_error_t (* g_pfn_disable_touch)(struct _context_t *p_device_context);
-+} zy_acocec_context_t, *p_zy_acocec_context_t;
-+
-+
-+
-+
-+
-+static p_zy_acocec_context_t p_zy_codec_ctxt = NULL;
-+
-+#include <linux/input.h>
-+//#include <asm/arch/codec/wm9713.h>
-+
-+#define PEN_DOWN 		1
-+#define PEN_UP			0
-+#define TS_SAMPLE_INTERVAL 	1
-+
-+typedef struct {
-+	struct input_dev *idev;
-+	struct timer_list *timer;
-+	int  use_count;
-+} codec_zy_ts_t;
-+
-+codec_zy_ts_t codec_zy_ts;
-+
-+static struct input_dev *codec_zy_ts_input;
-+
-+#ifdef CONFIG_PM
-+static volatile int touch_suspend = 0 ;
-+#endif
-+
-+#define ZY_AC97_CODEC_REGS_NUM        0x40
-+
-+typedef struct
-+{  //   Register symbol     // Usage
-+    volatile unsigned long pocr;           // PCM Out Control Register
-+    volatile unsigned long picr;           // PCM In Control Register
-+    volatile unsigned long mccr;           // Mic In Control Register
-+    volatile unsigned long gcr;            // Global Control Register
-+    volatile unsigned long posr;           // PCM Out Status Register
-+    volatile unsigned long pisr;           // PCM In Status Register
-+    volatile unsigned long mcsr;           // Mic In Status Register
-+    volatile unsigned long gsr;            // Global Status Register
-+    volatile unsigned long car;            // CODEC Access Register
-+    volatile unsigned long pcscr;          // PCM Surround Out Control
-+    volatile unsigned long pcssr;          // PCM Surround Out Status
-+    volatile unsigned long pcsdr;          // PCM Surround Out Data
-+    volatile unsigned long pcclcr;         // PCM Center/LFE Out Control
-+    volatile unsigned long pcclsr;         // PCM Center/LFE Out Status
-+    volatile unsigned long pccldr;         // PCM Center/LFE Out Data
-+    volatile unsigned long reserved1;       //
-+    volatile unsigned long pcdr;           // PCM FIFO Data Register
-+    volatile unsigned long reserved2 [0x7];      // 0x4050-0044 through 0x4050-005C
-+    volatile unsigned long mcdr;           // Mic-in FIFO Data Register
-+    volatile unsigned long reserved3 [0x27];   // 0x4050-0064 through 0x4050-00FC
-+    volatile unsigned long mocr;           // MODEM Out Control Register
-+    volatile unsigned long reserved4;
-+    volatile unsigned long micr;           // MODEM In Control Register
-+    volatile unsigned long reserved5;
-+    volatile unsigned long mosr;           // MODEM Out Status Register
-+    volatile unsigned long reserved6;
-+    volatile unsigned long misr;           // MODEM In Status Register
-+    volatile unsigned long reserved7 [0x9];      // 0x4050-011C through 0x4050-013C
-+    volatile unsigned long modr;           // MODEM FIFO Data Register
-+    volatile unsigned long reserved8 [0x2F];   // 0x4050-0144 through 0x4050-01FC
-+                            // Primary Audio CODEC registers access
-+    volatile unsigned long codec_regs_primary_aud   [ZY_AC97_CODEC_REGS_NUM];
-+                            // Secondary ID 01 Audio CODEC registers access
-+    volatile unsigned long codec_regs_secondary_aud [ZY_AC97_CODEC_REGS_NUM];
-+                            // Primary MODEM CODEC registers access
-+    volatile unsigned long codec_regs_primary_mdm   [ZY_AC97_CODEC_REGS_NUM];
-+                            // Secondary ID 01 MODEM CODEC registers access
-+    volatile unsigned long codec_regs_secondary_mdm [ZY_AC97_CODEC_REGS_NUM];
-+                            // Secondary ID 10 MODEM CODEC registers access
-+    volatile unsigned long codec_regs_third_mdm [ZY_AC97_CODEC_REGS_NUM];
-+                            // Secondary ID 11 MODEM CODEC registers access
-+    volatile unsigned long codec_regs_fouth_mdm [ZY_AC97_CODEC_REGS_NUM];
-+                            // Secondary ID 10 Audio CODEC registers access
-+    volatile unsigned long codec_regs_third_aud [ZY_AC97_CODEC_REGS_NUM];
-+                            // Secondary ID 11 Audio CODEC registers access
-+    volatile unsigned long codec_regs_fouth_aud [ZY_AC97_CODEC_REGS_NUM];
-+}  zy_ac97_acodec_t, *p_zy_ac97acodec_t ;
-+
-+
-+/* Constants for the Global Control Register and Global Status Register */
-+
-+// AC97 Global Control Register bit mask constants
-+
-+#define ZY_AC97_GCR_GIE_MSK          (1u << 0 )
-+#define ZY_AC97_GCR_COLD_RESET_MSK   (1u << 1 )
-+#define ZY_AC97_GCR_WARM_RESET_MSK   (1u << 2 )
-+#define ZY_AC97_GCR_LINK_OFF_MSK     (1u << 3 )
-+#define ZY_AC97_GCR_PCRSM_IEN_MSK    (1u << 4 )
-+#define ZY_AC97_GCR_SCRSM_IEN_MSK    (1u << 5 )
-+#define ZY_AC97_GCR_PCRDY_IEN_MSK    (1u << 8 )
-+#define ZY_AC97_GCR_SCRDY_IEN_MSK    (1u << 9 )
-+#define ZY_AC97_GCR_SDONE_IE_MSK     (1u << 18)
-+#define ZY_AC97_GCR_CDONE_IE_MSK     (1u << 19)
-+#define ZY_AC97_GCR_nDMAEN_MSK       (1u << 24)
-+#define ZY_AC97_GCR_CLKBPB_MSK       (1u << 31)
-+#define ZY_AC97_GCR_FRCRST_MSK       (1u << 30)
-+// Global Status Register bit mask constants
-+
-+#define ZY_AC97_GSR_GSCI_MSK       (1u << 0 )
-+#define ZY_AC97_GSR_MIINT_MSK      (1u << 1 )
-+#define ZY_AC97_GSR_MOINT_MSK      (1u << 2 )
-+#define ZY_AC97_GSR_ACOFFD_MSK     (1u << 3 )
-+#define ZY_AC97_GSR_PIINT_MSK      (1u << 5 )
-+#define ZY_AC97_GSR_POINT_MSK      (1u << 6 )
-+#define ZY_AC97_GSR_MINT_MSK       (1u << 7 )
-+#define ZY_AC97_GSR_PCRDY_MSK      (1u << 8 )
-+#define ZY_AC97_GSR_SCRDY_MSK      (1u << 9 )
-+#define ZY_AC97_GSR_PCRSM_MSK      (1u << 10)
-+#define ZY_AC97_GSR_SCRSM_MSK      (1u << 11)
-+#define ZY_AC97_GSR_SLT12_BITS_MSK (7u << 12)
-+#define ZY_AC97_GSR_RCS_ERR_MSK    (1u << 15)
-+#define ZY_AC97_GSR_SDONE_MSK      (1u << 18)
-+#define ZY_AC97_GSR_CDONE_MSK      (1u << 19)
-+
-+
-+// Bit mask and values for CAIP bit in car register.
-+#define ZY_AC97_CAR_CAIP_MSK       (0x1<<0)
-+#define ZY_AC97_CAR_CAIP_LOCKED    (0x1<<0)
-+#define ZY_AC97_CAR_CAIP_CLEAR     (0<<0)
-+
-+/* Constants for FIFO status reporting and control */
-+
-+// One bit location is used to report FIFO error conditions and clear
-+//  interrupts on those conditions in the various non-global status registers.
-+
-+// ZY_AC97_FIFOSTAT_FIFOE is used in:
-+                                                // posr
-+                                                // pisr
-+                                                // mcsr
-+                                                // mosr
-+                                                // misr
-+
-+#define ZY_AC97_FIFOSTAT_FIFOE  (1u << 4)
-+#define ZY_AC97_FIFOSTAT_EOC	  (1u << 3)
-+#define ZY_AC97_FIFOSTAT_FSR	  (1u << 2)
-+
-+// A different bit location is used to enable or disable interrupts based on
-+//  FIFO error conditions in the various non-global control registers.
-+
-+// ZY_AC97_FIFOCTRL_FEIE is used in:
-+                                                // pocr
-+                                                // picr
-+                                                // mccr
-+                                                // mocr
-+                                                // micr
-+
-+#define ZY_AC97_FIFOCTRL_FEIE  (1u << 3)
-+#define ZY_AC97_FIFOCTRL_FSRIE (1u << 1)
-+
-+/*
-+*******************************************************************************
-+    AC'97 Codec Registers Location and Bit Definition
-+*******************************************************************************
-+*/
-+
-+/* */
-+
-+    // Includes symbolic values for certain proprietary register asssignments
-+    //   in AC'97 devices that might be used with ZY_AC97.
-+
-+    // Valid for subset of R 2.1 specification.
-+    // Leading "e" in comment means it is an "expanded" register definition as
-+    //  found in one or more of the Appendices A-D of the R 2.1 specification.
-+    //  Appendix identifier will immediately follow the "e", such as "eA"
-+    // R/O indicates read-only
-+    // Registers not supported by the assumed controller will be commented out.
-+
-+#define    ZY_AC97_CR_RESET_ID             0x00  // RESET CODEC TO DEFAULT, get ID info
-+#define    ZY_AC97_CR_MASTER_VOLUME        0x02  // LINE OUT VOLUME
-+#define    ZY_AC97_CR_HEADPHONE_VOLUME     0x04  //
-+#define    ZY_AC97_CR_MASTER_VOLUME_MONO   0x06  //
-+#define    ZY_AC97_CR_MASTER_TONE_R_L      0x08  //
-+#define    ZY_AC97_CR_PC_BEEP_VOLUME       0x0A  //
-+#define    ZY_AC97_CR_PHONE_VOLUME         0x0C  //
-+#define    ZY_AC97_CR_MIC_VOLUME           0x0E  //   micrOPHONE VOLUME/ AGC
-+#define    ZY_AC97_CR_LINE_IN_VOLUME       0x10  //   LINE IN VOLUME
-+#define    ZY_AC97_CR_CD_VOLUME            0x12  //
-+#define    ZY_AC97_CR_VIDEO_VOLUME         0x14  //
-+#define    ZY_AC97_CR_AUX_VOLUME           0x16  //
-+#define    ZY_AC97_CR_PCM_OUT_VOLUME       0x18  //
-+#define    ZY_AC97_CR_RECORD_SELECT        0x1A  //   SELECT LINE IN OR micrOPHONE
-+#define    ZY_AC97_CR_RECORD_GAIN          0x1C  //
-+#define    ZY_AC97_CR_RECORD_GAIN_MIC      0x1E  //
-+#define    ZY_AC97_CR_GENERAL_PURPOSE      0x20  //
-+#define    ZY_AC97_CR_CONTROL_3D           0x22  //
-+#define    ZY_AC97_CR_POWERDOWN_CTRL_STAT  0x26  //   POWER MANAGEMENT
-+#define    ZY_AC97_CR_E_AUDIO_ID           0x28  // eA Extended audio sprt info, R/O
-+#define    ZY_AC97_CR_E_AUDIO_CTRL_STAT    0x2A  // eA Extended audio stat + control
-+
-+//
-+// Audio Sample Rate Control Registers, 0x2C - 0x34
-+//
-+                                           // eA PCM Front DAC rate control
-+#define    ZY_AC97_CR_E_ASR_PCM_FRNT_DAC_RT 0x2C  //  (output slots 3, 4, 6)
-+#define    ZY_AC97_CR_E_ASR_PCM_LR_ADC_RT   0x32  // eA PCM L+R ADC rate control (3+4)
-+#define    ZY_AC97_CR_E_ASR_MIC_ADC_RT      0x34  // eA PCM Mic ADC rate control (5)
-+
-+
-+#define    ZY_AC97_CR_E_MDM_GPIO_PIN_STAT     0x54
-+//
-+// 5Ah-7Ah: Vendor Reserved
-+//
-+//
-+// 7Ch-7Eh: Vendor ID registers.  Optional but standardized for Plug'n'Play
-+//
-+#define    ZY_AC97_CR_VENDOR_ID1         0x7C
-+#define    ZY_AC97_CR_VENDOR_ID2         0x7E
-+
-+#define    ZY_AC97_CR_MAX               ZY_AC97_CR_VENDOR_ID2
-+
-+#define    ZY_AC97_CR_END_OF_LIST       (ZY_AC97_CR_MAX +  2)
-+
-+
-+
-+/* Other Constants */
-+
-+// For accessing the Codec mixer registers, each increment of one 32-bit word
-+//  in processor space increments the addressed mixer register by two.
-+// This does not cause any ambiguities because only even mixer register
-+//  addresses are currently supported (AC '97 spec, R 2.2)
-+#define ZY_AC97_CODEC_REGS_PER_WORD   	2
-+
-+/* Default timeout and holdtime settings */
-+
-+// timeout in reading and writing codec registers through AC link
-+#define ZY_AC97_RW_TIMEOUT_DEF		200	//unit is us
-+
-+// timeout in waiting for codec's ready signal during setup process
-+#define ZY_AC97_SETUP_TIMEOUT_DEF		500	//unit is us
-+
-+// timeout in waiting for locking the link successfully
-+#define ZY_AC97_LOCK_TIMEOUT_DEF   		300	//unit is us
-+
-+// timeout in shutting down the link
-+#define ZY_AC97_LINKOFF_TIMEOUT_DEF   	500	//unit is us
-+
-+// holdtime for keeping nReset signal active(low) in AC link
-+#define ZY_AC97_COLD_HOLDTIME			100	//unit is us
-+
-+/*
-+*******************************************************************************
-+  ZY AC97 data structure used in function interface
-+*******************************************************************************
-+*/
-+
-+typedef struct
-+{
-+    unsigned long pocr;           // PCM Out Control Register
-+    unsigned long picr;           // PCM In Control Register
-+    unsigned long mccr;           // Mic In Control Register
-+    unsigned long gcr;            // Global Control Register
-+    unsigned long pcscr;          // PCM Surround Out Control
-+    unsigned long pcclcr;         // PCM Center/LFE Out Control
-+    unsigned long mocr;           // MODEM Out Control Register
-+    unsigned long micr;           // MODEM In Control Register
-+}zy_ac97_save_context_t;
-+
-+
-+#define AC97_SAVE_CONTEXT_SIZE (sizeof(zy_ac97_save_context_t))
-+
-+static int zy_ac97_acodec_link_lock(p_zy_ac97acodec_t p_ac97_reg)
-+{
-+	int		status = 1;
-+	volatile unsigned long	car_tmp;
-+
-+	car_tmp = p_ac97_reg->car;
-+	if (car_tmp & ZY_AC97_CAR_CAIP_MSK)	/*  "1" in CAIP bit means lock failed. */
-+	{
-+		status = 0;
-+	}
-+	return (status);
-+}
-+
-+
-+zy_acodec_error_t zy_ac97_acodec_write (zy_acocec_context_t *p_dev_context, unsigned short offset, unsigned short data)
-+{
-+	zy_acodec_error_t	status = ZY_ACODEC_SUCCESS;
-+	int			got_link;
-+	unsigned long		time_remaining;
-+	volatile unsigned long *	p_codec_reg;
-+	p_zy_ac97acodec_t p_ac97_reg = (p_zy_ac97acodec_t)(p_dev_context->p_ctrl_reg);
-+	unsigned long max_rw_time_out_us = (p_dev_context->u_max_read_write_time_out_ms) * 1000;
-+
-+
-+	if(offset == ZY_AC97_CR_E_MDM_GPIO_PIN_STAT)
-+	{/* it is a special register and sent out on slot 12 */
-+		p_codec_reg = &(p_ac97_reg->codec_regs_primary_mdm[0]);
-+		p_codec_reg += offset / ZY_AC97_CODEC_REGS_PER_WORD;
-+		/*  The data will be sent out on slot 12. */
-+		*p_codec_reg = (unsigned long)data;
-+		goto done;
-+	}
-+
-+	/*  Point to specified register within area mapped to target codec regs */
-+	p_codec_reg = &(p_ac97_reg->codec_regs_primary_aud[0]);
-+	p_codec_reg += offset / ZY_AC97_CODEC_REGS_PER_WORD;
-+
-+
-+	/* Lock the ACLINK */
-+	time_remaining = ZY_AC97_LOCK_TIMEOUT_DEF;
-+	do
-+	{
-+		got_link = zy_ac97_acodec_link_lock(p_ac97_reg);
-+		if (0 == got_link)	/*  1 usec is a long time.  Skip delay if possible. */
-+		{
-+			udelay(1);
-+		}
-+	}		/*  Wait while time remaining and ACLINK not available */
-+	while (time_remaining-- && (0 == got_link));
-+
-+	if (0 == got_link)	/*  Didn't get the ACLINK */
-+	{
-+		status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT;
-+		printk(KERN_ERR "AC97 Write Link Timeout\n");
-+	}
-+	else	/*  We got the link. Perform the write operation and don't wait. */
-+	{
-+		/*  First, clear old write status indication CDONE by writing a ONE to that bit. */
-+		p_ac97_reg->gsr = ZY_AC97_GSR_CDONE_MSK;
-+
-+		*p_codec_reg = (unsigned long)data;	   /*  Now the write! */
-+
-+		/* Wait until write cycle is complete. There should be a way
-+		 * to do this speculatively at the beginning of the procedure.
-+		 * Need to discover it. Too inefficient to always wait.
-+		 */
-+
-+		time_remaining = max_rw_time_out_us;
-+		do
-+		{
-+			udelay(1);
-+		}	 /*  Wait while time remaining and command I/O still incomplete. */
-+		while ( (time_remaining--) && !(p_ac97_reg->gsr & ZY_AC97_GSR_CDONE_MSK));
-+		if (!(p_ac97_reg->gsr & ZY_AC97_GSR_CDONE_MSK))
-+		{
-+			status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT;
-+			p_ac97_reg->car = ZY_AC97_CAR_CAIP_CLEAR;
-+		}
-+	}  /*  Got AC link */
-+
-+done:
-+	return(status);
-+} /*  Ac97CtrlCodecWrite() */
-+
-+#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
-+#define CKENB		__REG(0x41340010)
-+
-+zy_acodec_error_t zy_ac97_acodec_read  (zy_acocec_context_t *p_dev_context, unsigned short offset,  unsigned short *pdata)
-+{
-+	zy_acodec_error_t	status = ZY_ACODEC_SUCCESS;
-+	int			got_link;
-+	unsigned long		time_remaining;
-+	volatile unsigned long *	p_codec_reg;
-+	p_zy_ac97acodec_t p_ac97_reg = (p_zy_ac97acodec_t)(p_dev_context->p_ctrl_reg);
-+	unsigned long max_rw_time_out_us = (p_dev_context->u_max_read_write_time_out_ms) * 1000;
-+
-+	/*  Point to specified register within area mapped to target codec regs */
-+	p_codec_reg = &(p_ac97_reg->codec_regs_primary_aud[0]);
-+	p_codec_reg += offset / ZY_AC97_CODEC_REGS_PER_WORD;
-+
-+	/* Lock the ACLINK */
-+	time_remaining = ZY_AC97_LOCK_TIMEOUT_DEF;
-+	do
-+	{
-+		got_link = zy_ac97_acodec_link_lock(p_ac97_reg);
-+		if (0 == got_link)	/*  1 usec is a long time.  Skip delay if possible. */
-+		{
-+			udelay(1);
-+		}
-+	}		/*  Wait while time remaining and ACLINK not available */
-+	while (time_remaining-- && (0 == got_link));
-+
-+	if (0 == got_link)	/*  Didn't get the ACLINK */
-+	{
-+		status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT;
-+		printk(KERN_ERR "AC97 Read Link Timeout\n");
-+	}
-+	else	/*  We got the link. Perform the write operation and don't wait. */
-+	{
-+		 /*  First, clear old read status indications. */
-+		p_ac97_reg->gsr = ZY_AC97_GSR_SDONE_MSK | ZY_AC97_GSR_RCS_ERR_MSK;
-+
-+		*pdata = (unsigned short)(*p_codec_reg); /*  This is THE DUMMY READ. */
-+
-+		 /*  Wait for read I/O with codec to complete before doing real read. */
-+		time_remaining = max_rw_time_out_us;
-+		do
-+		{
-+			udelay(1);
-+		}   /*  Wait while time remaining and read I/O still incomplete */
-+		while( (time_remaining--) && (!(p_ac97_reg->gsr & ZY_AC97_GSR_SDONE_MSK)) );
-+
-+		if ((p_ac97_reg->gsr & ZY_AC97_GSR_SDONE_MSK) && (!(p_ac97_reg->gsr & ZY_AC97_GSR_RCS_ERR_MSK)) )
-+		{
-+			if (p_ac97_reg->gsr & ZY_AC97_GSR_RCS_ERR_MSK)
-+			{/* timeout indicated by RCS bit */
-+				status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT;
-+			}
-+			/*  succeed in reading. clear status bits first. */
-+			p_ac97_reg->gsr = ZY_AC97_GSR_SDONE_MSK | ZY_AC97_GSR_RCS_ERR_MSK;
-+			*pdata = (unsigned short)(*p_codec_reg);	/*  THE REAL READ. */
-+			if (*pdata == 0xffff)
-+			{/* timeout indicated by returned value */
-+				status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT;
-+			}
-+			/* check later: is second waiting really needed? */
-+	 		time_remaining = max_rw_time_out_us;
-+			do
-+			{
-+				udelay(1);
-+  			}   /*  Wait while time remaining and read I/O still incomplete */
-+			while( (time_remaining--) && (!(p_ac97_reg->gsr & ZY_AC97_GSR_SDONE_MSK)) );
-+			//printk(KERN_ERR "AC97 Read Result %d\n", (p_ac97_reg->gsr & ZY_AC97_GSR_SDONE_MSK) );
-+		}
-+		else	/*  failed */
-+		{
-+			status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT;
-+			p_ac97_reg->car = ZY_AC97_CAR_CAIP_CLEAR;
-+			//printk(KERN_ERR "AC97 Read Link Timeout2 %x %x %x\n", CKENA, OSCC, CKENB);
-+		} /*  else  (OK to do real read) */
-+
-+	} /*  else  (We got the link.  Perform the read operations.) */
-+
-+	return (status);
-+}
-+
-+
-+
-+zy_acodec_error_t zy_acodec_get_adc_sample(zy_acocec_context_t *p_device_context, unsigned short *p_sample_data, unsigned short adc_type, int *p_pen_down)
-+{
-+	zy_acodec_error_t	status = ZY_ACODEC_SUCCESS;
-+	unsigned short value;
-+	unsigned long wait;
-+
-+	if (adc_type == ZY_TOUCH_SAMPLE_X)
-+	{
-+		value = 0x202;
-+	}
-+	else
-+	{/* Y sample */
-+		value = 0x204;
-+	}
-+
-+	status = zy_ac97_acodec_write(p_device_context, DIGITIZER_1_WM13, value);
-+
-+	wait = 0;
-+	do
-+	{
-+		status = zy_ac97_acodec_read(p_device_context, DIGITIZER_1_WM13, &value);
-+		if ( !(value & 0x200 ) )
-+		{
-+			break;
-+		}
-+	}while ( 100 > wait++ );
-+
-+	status = zy_ac97_acodec_read(p_device_context, DIGITIZER_READ_BACK, &value);
-+	if (value & 0x8000)
-+	{/* means pen down */
-+		*p_pen_down = 1;
-+	}
-+	else
-+	{
-+		*p_pen_down = 0;
-+	}
-+	*p_sample_data = value & 0xfff;
-+
-+	return status;
-+}
-+
-+
-+
-+/*
-+ * add a touch event
-+ */
-+static int codec_zy_ts_evt_add(codec_zy_ts_t* ts, u16 pressure, u16 x, u16 y)
-+{
-+        /* add event and remove adc src bits */
-+        static u16 pre_press = 0;
-+
-+        input_report_abs(ts->idev, ABS_X, x & 0xfff);
-+        input_report_abs(ts->idev, ABS_Y, y & 0xfff);
-+        if (pressure == pre_press){
-+                pressure--;
-+        }
-+        pre_press = pressure;
-+        input_report_abs(ts->idev, ABS_PRESSURE, pressure & 0xfff);
-+	input_sync(ts->idev);
-+#ifdef CONFIG_IPM
-+	ipm_event_notify(IPM_EVENT_UI, IPM_EVENT_DEVICE_TSI, NULL, 0);
-+#endif
-+        return 0;
-+}
-+
-+/*
-+ * add a pen up event
-+ */
-+static void codec_zy_ts_evt_release(codec_zy_ts_t* ts)
-+{
-+	input_report_abs(ts->idev, ABS_PRESSURE, 0);
-+	input_sync(ts->idev);
-+
-+#ifdef CONFIG_IPM
-+	ipm_event_notify(IPM_EVENT_UI, IPM_EVENT_DEVICE_TSI, NULL, 0);
-+#endif
-+	p_zy_codec_ctxt->g_pfn_event_ack(p_zy_codec_ctxt,ZY_EVENT_TYPE_PDN);
-+}
-+
-+/*
-+ * Kill the touchscreen thread and stop
-+ * the touch digitiser.
-+ */
-+static void codec_zy_ts_input_close(struct input_dev *idev)
-+{
-+	codec_zy_ts_t *ts = (codec_zy_ts_t *) &codec_zy_ts;
-+
-+#ifdef CONFIG_PM
-+	if(touch_suspend){
-+		pr_info("touch is suspended!\n");
-+		return -1;
-+	}
-+#endif
-+	dbg("close ts input!\n");
-+	if (--ts->use_count == 0) {
-+		del_timer(ts->timer);
-+		if (ts->timer != NULL)
-+			kfree(ts->timer);
-+		p_zy_codec_ctxt->g_pfn_disable_touch(p_zy_codec_ctxt);
-+	}
-+}
-+
-+/*
-+ * Sample the touchscreen
-+ */
-+int ac97_poll_touch(codec_zy_ts_t *ts)
-+{
-+	unsigned short x=0, y=0;
-+	int if_down= 0;
-+	zy_acodec_error_t status = ZY_ACODEC_SUCCESS;
-+
-+#ifdef DEBUG
-+        start_time = OSCR;
-+#endif
-+
-+	/* get x value */
-+	status = zy_acodec_get_adc_sample(p_zy_codec_ctxt, &x, ZY_TOUCH_SAMPLE_X, &if_down);
-+	if (ZY_ACODEC_SUCCESS != status ){
-+		return -EIO;
-+	}
-+	dbg("x:0x%x\n", x);
-+
-+	/* the pen is up */
-+	if (1 != if_down){
-+		return PEN_UP;
-+	}
-+
-+	/* get y vaule */
-+	status = zy_acodec_get_adc_sample(p_zy_codec_ctxt, &y, ZY_TOUCH_SAMPLE_Y, &if_down);
-+	if (ZY_ACODEC_SUCCESS != status ){
-+		return -EIO;
-+	}
-+	dbg("y:0x%x\n",y);
-+
-+	/* the pen is up */
-+	if (1 != if_down){
-+		return PEN_UP;
-+	}
-+
-+	/* the pen is down, can not get the pressure value,
-+	 * so if pen is down, give the max pressure value
-+	 */
-+	codec_zy_ts_evt_add(ts,0xfff, x, y);
-+
-+#ifdef DEBUG
-+        end_time = OSCR;
-+        PRINT_TIME();
-+#endif
-+
-+	return PEN_DOWN;
-+}
-+
-+static void touch_timer_handler(unsigned long unused)
-+{
-+	int event;
-+	codec_zy_ts_t *ts = &codec_zy_ts;
-+
-+	event = ac97_poll_touch(ts);
-+
-+	if (event == PEN_DOWN) {
-+		dbg("pen down!\n");
-+		ts->timer->expires = jiffies + TS_SAMPLE_INTERVAL;
-+		add_timer(ts->timer);
-+	} else if(event == PEN_UP) {
-+		dbg("pen up!\n");
-+		codec_zy_ts_evt_release(ts);
-+	} else if(event == -EIO) {
-+		printk(KERN_ERR "Access touch interface error!\n");
-+	}
-+	return;
-+}
-+
-+static zy_acodec_error_t  zy_ac97_acodec_cold_reset(zy_acocec_context_t * p_ac97_ctxt)
-+{
-+	zy_acodec_error_t	status = ZY_ACODEC_SUCCESS;
-+	p_zy_ac97acodec_t p_ac97 = (p_zy_ac97acodec_t)(p_ac97_ctxt->p_ctrl_reg);
-+	int		 pri_codec_ready;
-+	unsigned long		time_remaining;
-+
-+	p_ac97->gcr = 0;
-+	p_ac97->gcr |= ZY_AC97_GCR_CLKBPB_MSK;
-+	/*  Hold reset active for a minimum time */
-+	udelay(ZY_AC97_COLD_HOLDTIME);
-+	p_ac97->gcr &= ~ZY_AC97_GCR_CLKBPB_MSK;
-+
-+	/*  Deactivate cold reset condition */
-+	p_ac97->gcr |= (ZY_AC97_GCR_COLD_RESET_MSK | ZY_AC97_GCR_WARM_RESET_MSK);
-+
-+
-+	pri_codec_ready = 0;
-+	time_remaining = (p_ac97_ctxt->u_max_setup_time_out_ms) * 10;
-+	do
-+	{
-+		udelay(1);
-+		if (p_ac97->gsr & ZY_AC97_GSR_PCRDY_MSK)
-+			pri_codec_ready = 1;
-+	}
-+	while (time_remaining-- && (pri_codec_ready == 0));
-+
-+	/*  Timeout status if some of the devices weren't ready. */
-+	if (pri_codec_ready == 0)
-+	{
-+		status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT;
-+	}
-+
-+	return (status);
-+}
-+
-+
-+zy_acodec_error_t  zy_ac97_acodec_init(zy_acocec_context_t *p_ac97_ctxt)
-+{
-+	zy_acodec_error_t	status ;
-+
-+	status = zy_ac97_acodec_cold_reset(p_ac97_ctxt);
-+
-+	return (status);
-+}
-+
-+
-+/*
-+ * Start the touchscreen thread and
-+ * the touch digitiser.
-+ */
-+static int codec_zy_ts_input_open(struct input_dev *idev)
-+{
-+	codec_zy_ts_t *ts = (codec_zy_ts_t *) &codec_zy_ts;
-+
-+#ifdef CONFIG_PM
-+	if(touch_suspend){
-+		pr_info("touch is suspended!\n");
-+		return -1;
-+	}
-+#endif
-+
-+	if (ts->use_count++ > 0)
-+		return 0;
-+
-+	dbg("Touch is opened. Use count: %d\n", ts->use_count);
-+	ts->idev = idev;
-+	ts->timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
-+	if (!ts->timer) {
-+		printk(KERN_ERR "Alloc memory error for timer!\n");
-+		return -ENOMEM;
-+	}
-+
-+	init_timer(ts->timer);
-+	ts->timer->function = touch_timer_handler;
-+	ts->timer->data = 0;
-+	p_zy_codec_ctxt->g_pfn_enable_touch(p_zy_codec_ctxt);
-+
-+	return 0;
-+}
-+
-+/*
-+ * initilze the pxa touch screen
-+ */
-+static int alsa_ts_init( void )
-+{
-+	codec_zy_ts_t* ts = &codec_zy_ts;
-+
-+	memset(ts, 0, sizeof(codec_zy_ts_t));
-+
-+	codec_zy_ts_input = input_allocate_device();
-+	if (!codec_zy_ts_input)
-+		return -ENOMEM;
-+
-+
-+	/* tell input system what we events we accept and register */
-+	codec_zy_ts_input->name = "codec zy touchscreen";
-+	codec_zy_ts_input->open = codec_zy_ts_input_open;
-+	codec_zy_ts_input->close = codec_zy_ts_input_close;
-+	__set_bit(EV_ABS, codec_zy_ts_input->evbit);
-+	__set_bit(ABS_X, codec_zy_ts_input->absbit);
-+	__set_bit(ABS_Y, codec_zy_ts_input->absbit);
-+	__set_bit(ABS_PRESSURE, codec_zy_ts_input->absbit);
-+	input_register_device(codec_zy_ts_input);
-+
-+	return 0;
-+}
-+
-+static irqreturn_t pxa_touch_irq(int irq, void *dev)
-+{
-+	unsigned char event_type;
-+
-+	//printk(KERN_ERR "%s: enter codec event handler\n", __FUNCTION__);
-+
-+	dbg("%s: enter codec event handler\n", __FUNCTION__);
-+	p_zy_codec_ctxt->g_pfn_get_event(p_zy_codec_ctxt, &event_type);
-+	switch (event_type) {
-+		case ZY_EVENT_TYPE_PDN:
-+		{
-+			codec_zy_ts_t *ts = &codec_zy_ts;
-+			/*if the touch is not open need not acknowledge the event*/
-+			if (ts->use_count <= 0)
-+				break;
-+			ts->timer->expires = jiffies + TS_SAMPLE_INTERVAL;
-+			add_timer(ts->timer);
-+			break;
-+		}
-+		default:
-+			printk("unsupported codec event:0x%x\n", event_type);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+static mfp_cfg_t extra_cfg[] = {
-+	MFP_CFG_X(GPIO17, AF3, DS03X, PULL_LOW),
-+	MFP_CFG_X(GPIO25, AF0, DS01X, PULL_LOW),
-+};
-+
-+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-+
-+extern void dump_mfp(void);
-+
-+zy_acodec_error_t	zy_ac97_acodec_mfp_init(zy_acocec_context_t *p_device_context)
-+{
-+	unsigned short codec_id;
-+
-+	//mhn_mfp_set_afds(MFP_RSVD_AC97_SDATA_IN_0, MFP_AF0, MFP_DS03X);
-+	//enable_ac97_pins();
-+	zy_ac97_acodec_init(p_device_context);
-+    	if (zy_ac97_acodec_read(p_device_context, 0x0, &codec_id)){
-+
-+		/*
-+		 * there is a bug on MonahansL/MonhansPL PC card: AC97_SDATA_IN is not connected to CODEC
-+		 * ECO 72: Connect PWM_0(MFP_RSVD_AC97_SDATA_IN_0) to CODEC as AC97_SDATA_IN
-+		 */
-+
-+		//mhn_mfp_set_afds(MFP_RSVD_AC97_SDATA_IN_0, MFP_RSVD_AC97_SDATA_IN_0_AF, MFP_DS03X);
-+		//mhn_mfp_set_afds(MFP_AC97_SDATA_IN_0, MFP_AF0, MFP_DS01X);
-+
-+		gpio_direction_output(mfp_to_gpio(MFP_PIN_GPIO17), 0);
-+		pxa3xx_mfp_config(ARRAY_AND_SIZE(extra_cfg));
-+		gpio_direction_input(mfp_to_gpio(MFP_PIN_GPIO25));
-+	}
-+
-+
-+	return ZY_ACODEC_SUCCESS;
-+}
-+
-+#define ZY_AC97_WM9713_GPIO_PIN_PDN ( 0x1 << 13 )  /* Pen down */
-+
-+/*power enable bit in 3ch and 3eh */
-+/*3ch */
-+#define ZY_AC97_9713_PWR_PADCPD   ( 0x1 << 15 )
-+#define ZY_AC97_9713_PWR_VMID     ( 0x1 << 14 )
-+#define ZY_AC97_9713_PWR_TSHUT    ( 0x1 << 13 )
-+#define ZY_AC97_9713_PWR_VXDAC    ( 0x1 << 12 )
-+#define ZY_AC97_9713_PWR_AUXDAC   ( 0x1 << 11 )
-+#define ZY_AC97_9713_PWR_MBIAS    ( 0x1 << 10 )
-+#define ZY_AC97_9713_PWR_PLL      ( 0x1 << 9 )
-+#define ZY_AC97_9713_PWR_DACL     ( 0x1 << 7 )
-+#define ZY_AC97_9713_PWR_DACR     ( 0x1 << 6 )
-+#define ZY_AC97_9713_PWR_ADCL     ( 0x1 << 5 )
-+#define ZY_AC97_9713_PWR_ADCR     ( 0x1 << 4 )
-+#define ZY_AC97_9713_PWR_HPLX     ( 0x1 << 3 )
-+#define ZY_AC97_9713_PWR_HPRX     ( 0x1 << 2 )
-+#define ZY_AC97_9713_PWR_SPKX     ( 0x1 << 1 )
-+#define ZY_AC97_9713_PWR_MX       ( 0x1 << 0 )
-+
-+/*3EH */
-+#define ZY_AC97_9713_PWR_MCD      ( 0x1 << 15 )
-+#define ZY_AC97_9713_PWR_MICBIAS  ( 0x1 << 14 )
-+#define ZY_AC97_9713_PWR_MONO     ( 0x1 << 13 )
-+#define ZY_AC97_9713_PWR_OUT4     ( 0x1 << 12 )
-+#define ZY_AC97_9713_PWR_OUT3     ( 0x1 << 11 )
-+#define ZY_AC97_9713_PWR_HPL      ( 0x1 << 10 )
-+#define ZY_AC97_9713_PWR_HPR      ( 0x1 << 9 )
-+#define ZY_AC97_9713_PWR_SPKL     ( 0x1 << 8 )
-+#define ZY_AC97_9713_PWR_SPKR     ( 0x1 << 7 )
-+#define ZY_AC97_9713_PWR_LL       ( 0x1 << 6 )
-+#define ZY_AC97_9713_PWR_LR       ( 0x1 << 5 )
-+#define ZY_AC97_9713_PWR_MOIN     ( 0x1 << 4 )
-+#define ZY_AC97_9713_PWR_MA       ( 0x1 << 3 )
-+#define ZY_AC97_9713_PWR_MB       ( 0x1 << 2 )
-+#define ZY_AC97_9713_PWR_MPA      ( 0x1 << 1 )
-+#define ZY_AC97_9713_PWR_MPB      ( 0x1 << 0 )
-+
-+
-+void zy_wm9713_get_event(zy_acocec_context_t *p_device_context, unsigned char * event_type)
-+{
-+	unsigned short event_state = 0;
-+	zy_ac97_acodec_read(p_device_context, GPIO_PIN_STATUS, &event_state);
-+	if(event_state & ZY_AC97_WM9713_GPIO_PIN_PDN){
-+		*event_type = ZY_EVENT_TYPE_PDN;
-+		return;
-+	}
-+	return;
-+}
-+
-+void zy_wm9713_event_ack(zy_acocec_context_t *p_device_context, unsigned char event_type)
-+{
-+	unsigned short event_state = 0;
-+	zy_ac97_acodec_read(p_device_context, GPIO_PIN_STATUS, &event_state);
-+	if( event_type == ZY_EVENT_TYPE_PDN){
-+		zy_ac97_acodec_write(p_device_context,
-+					GPIO_PIN_STATUS,
-+					(event_state & (~ZY_AC97_WM9713_GPIO_PIN_PDN)));
-+	}
-+
-+	zy_ac97_acodec_read(p_device_context, GPIO_PIN_STATUS, &event_state);
-+	return;
-+}
-+
-+static void * p_saved_memory = NULL;
-+static void * p_zy_scenario = NULL;
-+static p_zy_acocec_context_t p_zy_ctxt = NULL;
-+
-+#define WM9713_SAVE_REGISTER_NO (64-11)
-+typedef struct {
-+    unsigned short wm9713RegisterContext [WM9713_SAVE_REGISTER_NO + 1]; /* Fixed (data misalignment error) */
-+}ZY_9713_CONTEXT_SAVE_T;
-+
-+
-+/**
-+ * alsa_prepare_for_zy - create and initialize the p_zy_acocec_context_t
-+ * 				   open the clock of data link
-+ * @p_p_zy_ctxt: return the data structure p_zy_acocec_context_t
-+ * return: 0 success ; -ENOMEM
-+ **/
-+int alsa_prepare_for_zy(p_zy_acocec_context_t * p_p_zy_ctxt)
-+{
-+	if (p_zy_ctxt) {
-+		p_zy_ctxt->use_count++;
-+		*p_p_zy_ctxt = p_zy_ctxt;
-+		return 0;
-+	}
-+
-+	p_zy_ctxt = kzalloc(sizeof(zy_acocec_context_t), GFP_KERNEL);
-+	if (!p_zy_ctxt)
-+		return -ENOMEM;
-+
-+	/* enable CLK_POUT as CODEC clock input */
-+	OSCC |= 0x800;
-+
-+	p_saved_memory = kzalloc(sizeof(ZY_9713_CONTEXT_SAVE_T) +
-+				sizeof(zy_ac97_save_context_t), GFP_KERNEL);
-+	if (NULL == p_saved_memory) {
-+		if (p_zy_ctxt)
-+			kfree(p_zy_ctxt);
-+		return -ENOMEM;
-+	}
-+
-+	p_zy_ctxt->acodec_id = (zy_acodec_device_id_t) (WM_9713_ID);
-+	p_zy_ctxt->use_count++;
-+	/*
-+	p_zy_ctxt->pMfpRegBase = (unsigned long) (MFP_BASE);
-+	p_zy_ctxt->pMfpRmDb = ZY_MFP_RM_DATABASE;
-+	p_zy_ctxt->p_ost_regs = OST_BASE;
-+	*/
-+	p_zy_ctxt->p_voice_reg = NULL;
-+	p_zy_ctxt->p_hifi_reg = (void *) (&POCR);
-+	p_zy_ctxt->p_ctrl_reg = (void *) (&POCR);
-+	p_zy_ctxt->u_max_read_write_time_out_ms = ZY_AC97_RW_TIMEOUT_DEF;
-+	p_zy_ctxt->u_max_setup_time_out_ms = ZY_AC97_SETUP_TIMEOUT_DEF;
-+	p_zy_ctxt->p_save_memory = p_saved_memory;
-+	p_zy_ctxt->p_zy_scenario = p_zy_scenario;
-+//	pxa_set_cken(24, 1);
-+	CKENA |= (1 << 24);
-+	AC97_DIV = 1625<<12 | 128;
-+#ifdef DEBUG_ALSA_ZY
-+	debug_pac97ctxt = p_zy_ctxt;
-+	misc_register(&audio_dev);
-+#endif
-+
-+	(*p_p_zy_ctxt) = p_zy_ctxt;
-+
-+	return 0;
-+}
-+
-+
-+/* this is platform specific */
-+/* do later: not to enable recording route and playback route in this function,
-+ * leave it to driver to call other function
-+ */
-+zy_acodec_error_t zy_wm9713_specific_init (zy_acocec_context_t *p_device_context)
-+{
-+
-+	unsigned short value;
-+
-+	/* this assumes that the aclink is initialized wait some time and then
-+	 * do a warm reset to enabled the ACLINK, required for wm9713
-+	 * (not wm9712 or ucb1400)
-+	 */
-+
-+	/* pay attention: whether the workaround is still needed? */
-+	p_zy_ac97acodec_t p_ac97_reg = (p_zy_ac97acodec_t)(p_device_context->p_ctrl_reg);
-+
-+	p_ac97_reg->gcr |= ZY_AC97_GCR_WARM_RESET_MSK;
-+
-+	mdelay(5);
-+
-+	/* power on all the necessary unit */
-+	zy_ac97_acodec_write(p_device_context,POWERDOWN_CTRL_STAT, 0x000);	/*26*/
-+	/* open left headphone mixer */
-+	/* open right headphone mixer */
-+	/* open right/left dac */
-+	/* open right/left adc */
-+	/* open temperature sensor */
-+	/* enable reference generator */
-+	zy_ac97_acodec_write(p_device_context,POWER_DOWN_1, 0xda00);		/*3c */
-+	/* open microphone bias */
-+	/* open HPL output PGA */
-+	/* open HPR output PGA */
-+	/* open mic PGA MA */
-+	/* open mic pre-amp MPA */
-+	/* if here we enable SPKL and SPKR PGA, then Touch screen will doesn't work */
-+	zy_ac97_acodec_write(p_device_context,POWER_DOWN_2,0xb9f5);   /*3e */
-+
-+	/* recording route and microphone input */
-+	/* microphone selection, now fixed to MIC1 input and mic bias output */
-+	/* MIC1 only, MICBIAS enable */
-+	zy_ac97_acodec_write (p_device_context, MIC_BIAS, 0xC440);	/*0x22h*/
-+
-+	/* mic pga setting to mixer (side tone) */
-+	/* comment the below code to make MICA/B play back volume gain + 0db */
-+	/* zy_ac97_acodec_write (p_device_context, MIC_PGA_VOLUME, 0x0000); */	/*0x0eh*/
-+
-+	/* recording side tone and ADC boost, now fixed to default (14h) */
-+	/* recording volume  0dB */
-+	zy_ac97_acodec_write(p_device_context, REC_PGA_VOL, 0x0); /*12*/
-+
-+	/* hifi playback route and output mixer	 */
-+	/* by default, fixed to enable headphone only */
-+
-+	/* comment the below code to make SPEAKER default MUTE */
-+	zy_ac97_acodec_write (p_device_context, SPEAKER_VOLUME, 0x0);		/*02*/
-+
-+	/* comment the below code to make OUT3_OUT4 default MUTE */
-+	/* zy_ac97_acodec_write (p_device_context, OUT3_OUT4_VOLUME, 0x8000); */	/*06*/
-+
-+	/* remove all  the mute bit  volume gain + 0db  */
-+	zy_ac97_acodec_write(p_device_context, HEADPHONE_VOLUME, 0x0);	/*04*/
-+
-+	/* DAC route */
-+	/* open DAC to headphone mixer path */
-+	/* left DAC gain +0db */
-+	/* right DAC gain +0db */
-+	zy_ac97_acodec_write(p_device_context, DAC_PGA_VOL_ROUTE,0x0808);	/*0c*/
-+
-+	/* out3 configure, invert to HPMIXR */
-+	/* zy_ac97_acodec_write(p_device_context,DAC_3D_CTRL_INV_MUX_SEL, 0x8000); */	/*1e*/
-+
-+	/* output control */
-+	 /* select HPMIXR HPMIXL out */
-+	 /* other out are all VIM */
-+	zy_ac97_acodec_write(p_device_context,OUTPUT_PGA_MUX, 0x9BA8);		/*1c*/
-+
-+	/* set sample rates */
-+	/* enable variable rate conversion */
-+	zy_ac97_acodec_write(p_device_context, EXTENDED_AUD_STAT_CTRL , 0x1); /*2a*/
-+	/*  DAC 44kHZ */
-+	zy_ac97_acodec_write(p_device_context,AUDIO_DAC_RATE,0xac44); /*2c*/
-+	/*  ADC 16KHZ */
-+	zy_ac97_acodec_write(p_device_context,AUDIO_ADC_RATE,0x3E80); /*32*/
-+
-+	/* clock scheme, use external clock, it is 24MHZ from MCLK_A */
-+
-+
-+	zy_ac97_acodec_read(p_device_context, MCLK_PLL_CTRL_1, &value);
-+	zy_ac97_acodec_write(p_device_context, MCLK_PLL_CTRL_1, value | 0x2);
-+
-+	return ZY_ACODEC_SUCCESS;
-+}
-+
-+zy_acodec_error_t zy_wm9713_specific_deinit (zy_acocec_context_t *p_device_context)
-+{/* do later: shut down all power */
-+	unsigned short value = 0;
-+
-+	/* close the power of all units */
-+	zy_ac97_acodec_write(p_device_context, POWER_DOWN_1, 0xffff);
-+	zy_ac97_acodec_write(p_device_context, POWER_DOWN_2, 0xffff);
-+	zy_ac97_acodec_read(p_device_context, POWER_DOWN_1, &value);
-+ 	value &= ~(ZY_AC97_9713_PWR_MBIAS);
-+	zy_ac97_acodec_write(p_device_context, POWER_DOWN_1, value);
-+
-+	return ZY_ACODEC_SUCCESS;
-+}
-+
-+zy_acodec_error_t zy_acodec_set_pen_down_interrupt(zy_acocec_context_t *p_device_context, int enable)
-+{/* disable/enable pen down interrupt in the codec. This function is not implemented for Wm9713 */
-+	/* because the pen down detection could not be disabled in codec */
-+	return ZY_ACODEC_SUCCESS;
-+}
-+
-+zy_acodec_error_t zy_wm9713_enable_touch(zy_acocec_context_t *p_device_context)
-+{/* enable touch functionality in the codec */
-+	zy_acodec_error_t	status = ZY_ACODEC_SUCCESS;
-+	unsigned short value;
-+
-+	/* power setting */
-+	status = zy_ac97_acodec_read(p_device_context, POWER_DOWN_1, &value);
-+	value &= ~(ZY_AC97_9713_PWR_PADCPD);
-+	status = zy_ac97_acodec_write(p_device_context, POWER_DOWN_1, value);
-+
-+	/* basic touch setting	 */
-+	status = zy_ac97_acodec_write(p_device_context, DIGITIZER_3_WM13, 0xc008);
-+	status = zy_ac97_acodec_write(p_device_context, DIGITIZER_2_WM13, 0x6);
-+
-+
-+	/* 9713 powerdown virtual gpio setting (polarity, sticky, wakeup) */
-+	/* 9713 gpio 2(pin45) route to IRQ */
-+	/*  Notes: Can use defaults for IRQ polarity, PENDOWN polarity in IRQ, */
-+	/*   sticky for PENDOWN in IRQ and wakeup for PENDOWN.	 */
-+	status = zy_ac97_acodec_read(p_device_context, GPIO_PIN_CFG, &value);
-+	value &= ~(0x4);
-+	status = zy_ac97_acodec_write(p_device_context, GPIO_PIN_CFG, value);
-+
-+	status = zy_ac97_acodec_read(p_device_context, GPIO_PIN_SHARING, &value);
-+	value &= ~(0x4);
-+	status = zy_ac97_acodec_write(p_device_context, GPIO_PIN_SHARING, value);
-+
-+	status = zy_ac97_acodec_read(p_device_context, GPIO_PIN_WAKEUP, &value);
-+	value |= (0x2000);
-+	status = zy_ac97_acodec_write(p_device_context, GPIO_PIN_WAKEUP, value);
-+
-+	status = zy_ac97_acodec_read(p_device_context, GPIO_PIN_STICKY, &value);
-+	value |= (0x2000);
-+	status = zy_ac97_acodec_write(p_device_context, GPIO_PIN_STICKY, value);
-+
-+	return status;
-+}
-+
-+zy_acodec_error_t zy_wm9713_disable_touch(zy_acocec_context_t *p_device_context)
-+{/* disable touch functionality in the codec */
-+	zy_acodec_error_t	status = ZY_ACODEC_SUCCESS;
-+	unsigned short value;
-+
-+	/* power setting */
-+	status = zy_ac97_acodec_read(p_device_context, POWER_DOWN_1, &value);
-+	value |= (ZY_AC97_9713_PWR_PADCPD);
-+	status = zy_ac97_acodec_write(p_device_context, POWER_DOWN_1, value);
-+
-+	return status;
-+}
-+zy_acodec_error_t	zy_ac97_acodec_mfp_deinit(zy_acocec_context_t *p_device_context)
-+{/* do later: free all MFP resources. */
-+    return ZY_ACODEC_SUCCESS;
-+}
-+
-+static zy_acodec_error_t  zy_ac97_acodec_shut_down_aclink(p_zy_ac97acodec_t p_ac97_reg, int * p_ost_regs)
-+{
-+	zy_acodec_error_t	status = ZY_ACODEC_SUCCESS;
-+	unsigned long time_remaining = ZY_AC97_LINKOFF_TIMEOUT_DEF;
-+
-+	p_ac97_reg->gcr |= ZY_AC97_GCR_LINK_OFF_MSK;
-+	p_ac97_reg->gcr |= ZY_AC97_GCR_CLKBPB_MSK;
-+
-+	while (!(p_ac97_reg->gsr & ZY_AC97_GSR_ACOFFD_MSK))
-+	{
-+		time_remaining --;
-+		if (0 == time_remaining)
-+		{
-+			status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT;
-+			break;
-+		}
-+		udelay(1);
-+	}
-+	p_ac97_reg->gcr |= ZY_AC97_GCR_FRCRST_MSK;
-+	/* check later: any delay needed */
-+	p_ac97_reg->gcr &= ~ZY_AC97_GCR_FRCRST_MSK;
-+	p_ac97_reg->gcr &= ~ZY_AC97_GCR_CLKBPB_MSK;
-+
-+	return(status);
-+}
-+
-+
-+zy_acodec_error_t  zy_ac97_acodec_deinit(zy_acocec_context_t * p_ac97_ctxt)
-+{
-+	zy_acodec_error_t	status ;
-+
-+	status = zy_ac97_acodec_shut_down_aclink((p_zy_ac97acodec_t)(p_ac97_ctxt->p_ctrl_reg), p_ac97_ctxt->p_ost_regs);
-+
-+	return (status);
-+}
-+
-+zy_acodec_error_t zy_acodec_deinit(zy_acocec_context_t *p_device_context)
-+{
-+	/* power down codec by codec specific power down function */
-+	if (p_device_context->g_pfn_codec_specific_dinit)
-+	{
-+		p_device_context->g_pfn_codec_specific_dinit(p_device_context);
-+	}
-+	/* call bus deinit function */
-+	zy_ac97_acodec_deinit(p_device_context);
-+	/* restore MFP, set GPIO to suitable value */
-+	zy_ac97_acodec_mfp_deinit(p_device_context);
-+
-+	return ZY_ACODEC_SUCCESS;
-+}
-+
-+void alsa_zy_codec_put(p_zy_acocec_context_t p_acodectxt)
-+{
-+
-+	zy_acodec_deinit(p_acodectxt);
-+	//pxa_set_cken(24, 0);
-+	CKENA &= ~(1 << 24);
-+
-+	if(p_acodectxt->p_save_memory){
-+		kfree(p_saved_memory);
-+	}
-+	if(p_acodectxt->p_zy_scenario){
-+		kfree(p_zy_scenario);
-+	}
-+}
-+
-+
-+zy_acodec_error_t zy_acodec_init(zy_acocec_context_t *p_device_context, int hw_init)
-+{
-+	/* set codec specific functions
-+	 * set mfp for Zylonite platform
-+	 * call bus init function (AC97, I2S, I2C, SSP)
-+	 * call specific init of codec
-+	 */
-+	zy_acodec_error_t retval = ZY_ACODEC_SUCCESS;
-+
-+	if (p_device_context->acodec_id != WM_9713_ID)
-+	{/* on Zylonite, it is Wolfson 9713 codec only */
-+		return ZY_ACODEC_GENERAL_SW_ERR;
-+	}
-+
-+	if (1 == hw_init)
-+	{
-+		zy_ac97_acodec_mfp_init(p_device_context);
-+		zy_ac97_acodec_init(p_device_context);  /* codec init common to ac97 */
-+	}
-+
-+	/* wm9713-specific functions */
-+	(p_device_context->g_pfn_codec_specific_init)	= zy_wm9713_specific_init;
-+	(p_device_context->g_pfn_codec_specific_dinit)  = zy_wm9713_specific_deinit;
-+	(p_device_context->g_pfn_acodec_read)		= zy_ac97_acodec_read;
-+	(p_device_context->g_pfn_acodec_write)		= zy_ac97_acodec_write;
-+
-+	(p_device_context->g_pfn_event_ack)    = zy_wm9713_event_ack;
-+	(p_device_context->g_pfn_get_event)    = zy_wm9713_get_event;
-+	(p_device_context->g_pfn_disable_touch)        = zy_wm9713_disable_touch;
-+	(p_device_context->g_pfn_enable_touch) = zy_wm9713_enable_touch;
-+
-+	if (1 == hw_init)
-+	{
-+		retval = p_device_context->g_pfn_codec_specific_init(p_device_context);
-+	}
-+
-+	return retval;
-+}
-+
-+static int __devinit touch_codec_zy_probe(struct platform_device *dev)
-+{
-+	int ret = 0;
-+	struct snd_card *card = NULL;
-+	zy_acodec_error_t status;
-+
-+	/* will increase codec context use count */
-+	ret = alsa_prepare_for_zy(&p_zy_codec_ctxt);
-+	if (ret)
-+		goto err;
-+
-+	/* codec specific initialization, audio will do it either */
-+	if (1 == p_zy_codec_ctxt->use_count) {
-+		status = zy_acodec_init(p_zy_codec_ctxt, 1);
-+		if (ZY_ACODEC_SUCCESS != status) {
-+			printk(KERN_ERR "initialize codec error\n");
-+			ret = -EIO;
-+			goto err;
-+		}
-+
-+	/* power down the units of the acodec, sleep the acodec, zy_acodec_init()
-+	 * will open all the units' power of the codec while ALSA need all the codec
-+	 * units power down and the codec should sleep if it can.
-+	 * So on the zylonite platform we call below function to power down and sleep
-+	 * wm9713 codec.
-+	 */
-+	p_zy_codec_ctxt->g_pfn_codec_specific_dinit(p_zy_codec_ctxt);
-+
-+	}
-+
-+	alsa_ts_init();
-+
-+	//mhn_mfp_set_afds(MFP_AC97_INT_N_GPIO,0,0);
-+	//mhn_gpio_set_direction(MFP_AC97_INT_N_GPIO, GPIO_DIR_IN);
-+	//mhn_gpio_clear_edge_detect_status(MFP_AC97_INT_N_GPIO);
-+	gpio_direction_input(mfp_to_gpio(MFP_PIN_GPIO26));
-+	ret = request_irq(IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO26)),
-+			pxa_touch_irq, IRQF_TRIGGER_RISING,
-+			"wm9713 touch event interrupt", NULL);
-+	if (ret) {
-+		printk(KERN_ERR "Request IRQ for touch failed (%d).\n", ret);
-+		goto err;
-+	}
-+
-+	return 0;
-+err:
-+	if (p_zy_codec_ctxt && (!--p_zy_codec_ctxt->use_count)) {
-+		zy_acodec_deinit(p_zy_codec_ctxt);
-+		//pxa_set_cken(24, 0);
-+		CKENA &= ~(1 << 24);
-+		kfree(p_zy_codec_ctxt);
-+		p_zy_codec_ctxt = NULL;
-+	}
-+
-+	if (card)
-+		snd_card_free(card);
-+
-+	return ret;
-+}
-+
-+static int __devexit touch_codec_zy_remove(struct platform_device *dev)
-+{
-+	struct snd_card *card = platform_get_drvdata(dev);
-+
-+	input_unregister_device(codec_zy_ts_input);
-+
-+	if (p_zy_codec_ctxt && (!--p_zy_codec_ctxt->use_count)) {
-+		alsa_zy_codec_put(p_zy_codec_ctxt);
-+		kfree(p_zy_codec_ctxt);
-+		p_zy_codec_ctxt = NULL;
-+	}
-+
-+	if (card) {
-+		snd_card_free(card);
-+		platform_set_drvdata(dev, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int touch_codec_zy_suspend(struct platform_device *_dev, pm_message_t state, u32 level)
-+{
-+	int ret=0;
-+	
-+	if (level == SUSPEND_DISABLE) {
-+		ret = audio_codec_zy_do_suspend(NULL, SNDRV_CTL_POWER_D3cold, p_zy_codec_ctxt);
-+		touch_suspend = 1;
-+	}
-+	return ret;
-+}
-+
-+static int touch_codec_zy_resume(struct platform_device *_dev, u32 level)
-+{
-+	int ret = 0;
-+	
-+	if (level == RESUME_ENABLE) {
-+		ret = audio_codec_zy_do_resume(NULL, SNDRV_CTL_POWER_D0, p_zy_codec_ctxt);
-+		touch_suspend = 0;
-+	}
-+	return ret;
-+}
-+#else
-+#define touch_codec_zy_suspend	NULL
-+#define touch_codec_zy_resume	NULL
-+#endif
-+
-+static struct platform_driver touch_codec_zy_driver = {
-+	.probe 	= 	touch_codec_zy_probe,
-+	.remove = 	__devexit_p(touch_codec_zy_remove),
-+	.suspend= 	touch_codec_zy_suspend,
-+	.resume = 	touch_codec_zy_resume,
-+	.driver = {
-+		.name 	= 	"pxa2xx-touch",
-+	},
-+};
-+
-+static int __init touch_codec_zy_init(void)
-+{
-+	return platform_driver_register(&touch_codec_zy_driver);
-+}
-+
-+static void __exit touch_code_zy_exit(void)
-+{
-+	platform_driver_unregister(&touch_codec_zy_driver);
-+}
-+module_init(touch_codec_zy_init);
-+module_exit(touch_code_zy_exit);
-+
-+EXPORT_SYMBOL(p_zy_codec_ctxt);
-+
-+MODULE_AUTHOR("bridge.wu@marvell.com");
-+MODULE_DESCRIPTION("zylonite audio touch codec driver on ALSA");
-+MODULE_LICENSE("GPL");
-+
diff --git a/packages/kexecboot/linux-kexecboot.inc b/packages/kexecboot/linux-kexecboot.inc
deleted file mode 100644
index 2056758796..0000000000
--- a/packages/kexecboot/linux-kexecboot.inc
+++ /dev/null
@@ -1,63 +0,0 @@
-# We set PR here, since a change in the kexecboot recipe will need to get picked up by *all* the kernels:
-PR = "r12"
-
-SRC_URI = "file://defconfig"
-
-LOGO_SIZE = '${@base_conditional("GUI_MACHINE_CLASS", "bigscreen", "vga", "qvga", d)}'
-SRC_URI += "file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2"
-
-require packages/linux/linux.inc
-
-DONT_CHECK_KERNELSIZE = ""
-INITRAMFS_IMAGE = "initramfs-kexecboot-image"
-
-CMDLINE = "console=ttyS0,115200n8 console=tty1"
-CMDLINE_poodle = "console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-CMDLINE_akita = "console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-CMDLINE_collie = "console=ttySA0,115200n8 console=tty1 mem=64M fbcon=rotate:1"
-CMDLINE_spitz = "console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-CMDLINE_hx4700 = "console=ttyS0,115200n8 console=tty1 fbcon=rotate:1"
-
-PACKAGES = ""
-PROVIDES = ""
-
-DOSRC = "http://www.do13.de/openzaurus/patches"
-JLSRC = "http://www.cs.wisc.edu/~lenz/zaurus/files"
-BASRC = "http://www.orca.cx/zaurus/patches"
-CHSRC = "http://oz.drigon.com/patches"
-TKSRC = "http://www.informatik.hu-berlin.de/~tkunze/zaurus/patches"
-
-KERNEL_IMAGE_BASE_NAME = "${KERNEL_IMAGETYPE}-kexecboot-${PV}-${PR}-${MACHINE}"
-KERNEL_IMAGE_SYMLINK_NAME = "${KERNEL_IMAGETYPE}-kexecboot-${MACHINE}"
-
-do_configure[depends] += "${INITRAMFS_IMAGE}:do_rootfs"
-
-do_configure_append() {
-sed -i -e /CONFIG_BLK_DEV_INITRD/d \
-       -e /CONFIG_INITRAMFS_SOURCE/d \
-       -e /=m/d \
-       -e /CONFIG_MODULES/d \
-       -e /CONFIG_DEBUG_ERRORS/d \
-       -e /CONFIG_DEBUG_BUGVERBOSE/d \
-       -e /CONFIG_DEBUG_KERNEL/d \
-       ${S}/.config
-
-# Remove last tag appended by linux.inc (output messes screen)
-sed -i -e /CONFIG_CMDLINE/s/quiet/loglevel=3/1 ${S}/.config
-sed -i -e /CONFIG_CMDLINE/s/debug/loglevel=3/1 ${S}/.config
-
-echo 'CONFIG_BLK_DEV_INITRD=y 
-CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"
-CONFIG_MODULES=n' >> ${S}/.config
-
-        yes '' | oe_runmake oldconfig
-}
-
-do_stage() {
-}
-
-do_install() {
-}
-
-python do_package() {
-}
diff --git a/packages/kexecboot/linux-kexecboot_2.6.21-hh20.bb b/packages/kexecboot/linux-kexecboot_2.6.21-hh20.bb
deleted file mode 100644
index 7667037037..0000000000
--- a/packages/kexecboot/linux-kexecboot_2.6.21-hh20.bb
+++ /dev/null
@@ -1,23 +0,0 @@
-require linux-kexecboot.inc
-
-DEFAULT_PREFERENCE = "-1"
-DEFAULT_PREFERENCE_hx4700 = "1"
-DEFAULT_PREFERENCE_h2200 = "1"
-
-SRC_URI = "${HANDHELDS_CVS};module=linux/kernel26;tag=${@'K' + bb.data.getVar('PV',d,1).replace('.', '-')} \
-           file://linux-2.6.git-9d20fdd58e74d4d26dc5216efaaa0f800c23dd3a.patch;patch=1 \
-           http://www.rpsys.net/openzaurus/patches/archive/export_atags-r0a.patch;patch=1 \
-           file://gcc4x-limits.patch;patch=1 \
-	   file://defconfig"
-
-SRC_URI += "file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2"
-
-S = "${WORKDIR}/kernel26"
-
-
-do_configure_append() {
-	gzip -d ${S}/initramfs.cpio.gz || true
-	sed -i -e s:\.gz::g .config		
-}
-
-
diff --git a/packages/kexecboot/linux-kexecboot_2.6.24.bb b/packages/kexecboot/linux-kexecboot_2.6.24.bb
deleted file mode 100644
index f728c7adc1..0000000000
--- a/packages/kexecboot/linux-kexecboot_2.6.24.bb
+++ /dev/null
@@ -1,191 +0,0 @@
-require linux-kexecboot.inc
-
-DEFAULT_PREFERENCE = "-1"
-DEFAULT_PREFERENCE_collie = "-1"
-DEFAULT_PREFERENCE_poodle = "1"
-DEFAULT_PREFERENCE_qemux86 = "-1"
-DEFAULT_PREFERENCE_tosa = "1"
-DEFAULT_PREFERENCE_c7x0 = "1"
-DEFAULT_PREFERENCE_akita = "1"
-DEFAULT_PREFERENCE_spitz = "1"
-
-# Handy URLs
-# git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046
-# ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.18.tar.bz2
-# ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/linux-2.6.20-rc4.tar.bz2
-# ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/patch-2.6.18-rc6.bz2;patch=1
-# ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/snapshots/patch-2.6.18-rc2-git1.bz2;patch=1
-# ${KERNELORG_MIRROR}/pub/linux/kernel/people/alan/linux-2.6/2.6.10/patch-2.6.10-ac8.gz;patch=1
-# ${KERNELORG_MIRROR}/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc2/2.6.14-rc2-mm1/2.6.14-rc2-mm1.bz2;patch=1
-
-# Patches submitted upstream are towards top of this list 
-# Hacks should clearly named and at the bottom
-SRC_URI += "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2 \
-           ${RPSRC}/export_atags-r2.patch;patch=1;status=pending \
-           ${RPSRC}/lzo_crypto-r2.patch;patch=1;status=pending \
-           ${RPSRC}/corgi_rearrange_lcd-r0.patch;patch=1;status=pending \
-	   file://hrw-hostapcard.patch;patch=1;status=pending \
-           ${RPSRC}/allow_disable_deferrred-r0.patch;patch=1 \
-           ${RPSRC}/lzo_jffs2_sysfs-r1.patch;patch=1 \
-           ${RPSRC}/hx2750_base-r33.patch;patch=1 \
-           ${RPSRC}/hx2750_bl-r9.patch;patch=1 \
-           ${RPSRC}/hx2750_pcmcia-r3.patch;patch=1 \
-           ${RPSRC}/pxa_keys-r8.patch;patch=1 \
-           ${RPSRC}/tsc2101-r18.patch;patch=1 \
-           ${RPSRC}/hx2750_test1-r8.patch;patch=1 \
-           ${RPSRC}/input_power-r10.patch;patch=1 \
-           ${RPSRC}/pxa25x_cpufreq-r2.patch;patch=1 \
-           ${RPSRC}/sharpsl_pm_fixes1-r0.patch;patch=1 \
-           ${RPSRC}/pm_changes-r1.patch;patch=1 \
-           ${RPSRC}/usb_add_epalloc-r4.patch;patch=1 \
-           ${RPSRC}/usb_pxa27x_udc-r8.patch;patch=1 \
-           ${RPSRC}/locomo_kbd_tweak-r1a.patch;patch=1 \
-           ${RPSRC}/pxa27x_overlay-r8.patch;patch=1 \
-           ${RPSRC}/w100_extaccel-r2.patch;patch=1 \
-           ${RPSRC}/w100_extmem-r1.patch;patch=1 \
-           ${RPSRC}/poodle_pm-r5.patch;patch=1 \
-           ${RPSRC}/poodle_lcd_hack-r0.patch;patch=1 \
-           ${RPSRC}/poodle_asoc_fix-r1.patch;patch=1 \
-           file://pxa27x-resume.patch;patch=1;status=external \
-           file://mtd-module.patch;patch=1;status=external \
-           file://wm8750-treble.patch;patch=1;status=external \
-           file://spitz_h_rewrite.patch;patch=1;status=external \
-           file://pxa2xx_udc-clock.patch;patch=1 \
-           file://sharpsl-rc-r1.patch;patch=1 \
-           file://sharpsl-rc-r2.patch;patch=1 \
-           file://squashfs3.3.patch;patch=1;status=external \
-#           ${RPSRC}/logo_oh-r1.patch.bz2;patch=1;status=unmergable \
-           ${RPSRC}/pxa-linking-bug.patch;patch=1;status=unmergable \
-           file://hostap-monitor-mode.patch;patch=1;status=unmergable \
-           file://serial-add-support-for-non-standard-xtals-to-16c950-driver.patch;patch=1;status=unmergable \
-           ${RPSRC}/mmcsd_large_cards-r1.patch;patch=1;status=hack \
-           ${RPSRC}/mmcsd_no_scr_check-r2.patch;patch=1;status=hack \
-           ${RPSRC}/integrator_rgb-r1.patch;patch=1;status=hack \
-           ${RPSRC}/pxa_cf_initorder_hack-r1.patch;patch=1;status=hack \
-           file://pxa-serial-hack.patch;patch=1;status=hack \
-           file://connectplus-remove-ide-HACK.patch;patch=1;status=hack \
-           file://connectplus-prevent-oops-HACK.patch;patch=1;status=hack \
-           file://binutils-buildid-arm.patch;patch=1 \
-           file://versatile-armv6.patch;patch=1 \
-           file://htcuni.patch;patch=1 \
-           "
-
-# FIXMEs before made default	   
-# ${RPSRC}/mmcsd_no_scr_check-r1.patch;patch=1;status=hack
-
-
-# Add this to enable pm debug code (useful with a serial lead)
-#  ${RPSRC}/sharpsl_pm_debug-r0.patch;patch=1
-
-# Disabled until I find the reason this gives issues with cdc_subset
-#            ${RPSRC}/usb_rndis_tweaks-r0.patch;patch=1 \
-
-
-SRC_URI_append_collie = "\
-	${TKSRC}/mtd-sharp-flash-hack-r4.patch;patch=1 \
-	${TKSRC}/mcp-sa11x0-r0.patch;patch=1 \
-	${TKSRC}/locomo-r1.patch;patch=1 \
-	${TKSRC}/collie-kexec-r1.patch;patch=1 \
-	${TKSRC}/sharpsl_pm-4.patch;patch=1 \
-	${TKSRC}/collie_pm-3.patch;patch=1 \
-	${TKSRC}/ucb1x00_suspend.patch;patch=1 \
-	${TKSRC}/collie-ts.patch;patch=1 \
-	${TKSRC}/pcmcia_suspend.patch;patch=1 \
-	${TKSRC}/locomo_spi-6.patch;patch=1 \
-	${TKSRC}/config.patch;patch=1 \
-	${TKSRC}/mmc-spi.patch;patch=1 \
-	${TKSRC}/linux-2.6.24-SIMpad-rtc-sa1100.patch;patch=1 \
-	${TKSRC}/sa1100_spinlock.patch;patch=1 \
-	${TKSRC}/sa1100-dma.patch;patch=1 \
-"
-
-SRC_URI_append_poodle = "\
-           ${RPSRC}/poodle_serial_vcc-r0.patch;patch=1 \
-           file://poodle_ts.patch;patch=1 \
-           file://pxafb.patch;patch=1 \
-"
-
-SRC_URI_append_tosa = "\
-           file://tosa/0001-Allow-runtime-registration-of-regions-of-memory-that.patch;patch=1 \
-           file://tosa/0002-Modify-dma_alloc_coherent-on-ARM-so-that-it-supports.patch;patch=1 \
-           file://tosa/0003-Core-MFD-support.patch;patch=1 \
-           file://tosa/0004-Add-support-for-tc6393xb-MFD-core.patch;patch=1 \
-           file://tosa/0005-Add-support-for-tc6387xb-MFD-core.patch;patch=1 \
-           file://tosa/0006-Add-support-for-t7l66xb-MFD-core.patch;patch=1 \
-           file://tosa/0007-Common-headers-for-TMIO-MFD-subdevices.patch;patch=1 \
-           file://tosa/0008-Nand-driver-for-TMIO-devices.patch;patch=1 \
-           file://tosa/0009-FB-driver-for-TMIO-devices.patch;patch=1 \
-           file://tosa/0010-OHCI-driver-for-TMIO-devices.patch;patch=1 \
-           file://tosa/0011-MMC-driver-for-TMIO-devices.patch;patch=1 \
-           file://tosa/0012-Tosa-keyboard-support.patch;patch=1 \
-           file://tosa/0013-USB-gadget-pxa2xx_udc-supports-inverted-vbus.patch;patch=1 \
-           file://tosa/0014-tosa_udc_use_gpio_vbus.patch.patch;patch=1 \
-           file://tosa/0015-sharpsl-export-params.patch;patch=1 \
-           file://tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch;patch=1 \
-           file://tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch;patch=1 \
-           file://tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch;patch=1 \
-           file://tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch;patch=1 \
-           file://tosa/0029-Support-using-VOLTAGE_-properties-for-apm-calculati.patch;patch=1 \
-           file://tosa/0030-Core-driver-for-WM97xx-touchscreens.patch;patch=1 \
-           file://tosa/0031-Add-chip-driver-for-WM9705-touchscreen.patch;patch=1 \
-           file://tosa/0032-Add-chip-driver-for-WM9712-touchscreen.patch;patch=1 \
-           file://tosa/0033-Add-chip-driver-for-WM9713-touchscreen.patch;patch=1 \
-           file://tosa/0034-Driver-for-WM97xx-touchscreens-in-streaming-mode-on.patch;patch=1 \
-           file://tosa/0035-Build-system-and-MAINTAINERS-entry-for-WM97xx-touchs.patch;patch=1 \
-           file://tosa/0036-Set-id-to-1-for-wm97xx-subdevices.patch;patch=1 \
-           file://tosa/0037-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch;patch=1 \
-           file://tosa/0038-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch;patch=1 \
-           file://tosa/0044-fix-tmio_mmc-debug-compilation.patch;patch=1 \
-           file://tosa/0045-Update-tmio_ohci.patch;patch=1 \
-           file://tosa/0046-patch-tc6393xb-cleanup.patch;patch=1 \
-           file://tosa/0047-tc6393xb-use-bitmasks-instead-of-bit-field-structs.patch;patch=1 \
-           file://tosa/0048-tc6393xb-GPIO-support.patch;patch=1 \
-           file://tosa/0049-platform-support-for-TMIO-on-tosa.patch;patch=1 \
-           file://tosa/0050-tosa-update-for-tc6393xb-gpio.patch;patch=1 \
-           file://tosa/0051-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch;patch=1 \
-           file://tosa/0052-tosa-platform-backlight-support.patch;patch=1 \
-           file://tosa/0053-sound-soc-codecs-wm9712.c-28.patch;patch=1 \
-           file://tosa/0054-sound-soc-codecs-wm9712.c-2.patch;patch=1 \
-           file://tosa/0055-Add-GPIO_POWERON-to-the-list-of-devices-that-we-supp.patch;patch=1 \
-           file://tosa/0058-Fix-tosakbd-suspend.patch;patch=1 \
-           file://tosa/0059-patch-tosa-wakeup-test.patch;patch=1 \
-           file://tosa/0060-Add-support-for-power_supply-on-tosa.patch;patch=1 \
-           file://tosa/0061-tosa-bat-unify.patch;patch=1 \
-           file://tosa/0062-tosa-bat-fix-charging.patch;patch=1 \
-           file://tosa/0063-patch-tosa-bat-jacket-detect.patch;patch=1 \
-           file://tosa/0064-Export-modes-via-sysfs.patch;patch=1 \
-           file://tosa/0065-wm97xx-core-fixes.patch;patch=1 \
-           file://tosa/0066-tmiofb_probe-should-be-__devinit.patch;patch=1 \
-           file://tosa/0067-modeswitching.patch;patch=1 \
-           file://tosa/0068-Preliminary-tosa-denoiser.patch;patch=1 \
-           file://tosa/0019-pxa-remove-periodic-mode-emulation-support.patch;patch=1 \
-           file://tosa/0020-Provide-dew-device-clock-backports-from-2.6.24-git.patch;patch=1 \
-           file://tosa/0021-Add-an-empty-drivers-gpio-directory-for-gpiolib-infr.patch;patch=1 \
-           file://tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch;patch=1 \
-           file://tosa/0023-This-adds-gpiolib-support-for-the-PXA-architecture.patch;patch=1 \
-           file://tosa/0024-Update-Documentation-gpio.txt-primarily-to-include.patch;patch=1 \
-           file://tosa/0025-Signed-off-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch;patch=1 \
-           file://tosa/0039-Add-generic-framework-for-managing-clocks.patch;patch=1 \
-           file://tosa/0040-Clocklib-debugfs-support.patch;patch=1 \
-           file://tosa/0041-From-80a359e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch;patch=1 \
-           file://tosa/0042-Use-correct-clock-for-IrDA-on-pxa.patch;patch=1 \
-           file://tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch;patch=1 \
-           file://tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch;patch=1 \
-           file://tosa/0057-Clean-up-tosa-resetting.patch;patch=1 \
-           file://tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch;patch=1 \
-	   file://tosa/tosa-bl-fixup.diff;patch=1 \
-           file://tosa/tmiofb-fix-unaccel.patch;patch=1 \
-           "
-#           file://tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch;patch=1 \
-#           file://tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch;patch=1 \
-
-SRC_URI_append_htcuniversal ="\
-	file://htcuni-acx.patch;patch=1;status=external \
-	"
-
-SRC_URI_append_zylonite ="\
-	file://pxa_fb_overlay.patch;patch=1 \
-	file://zylonite-boot.patch;patch=1 \
-	"
-
-S = "${WORKDIR}/linux-2.6.24"
diff --git a/packages/kexecboot/linux-kexecboot_2.6.26.bb b/packages/kexecboot/linux-kexecboot_2.6.26.bb
deleted file mode 100644
index bf1dbb62bf..0000000000
--- a/packages/kexecboot/linux-kexecboot_2.6.26.bb
+++ /dev/null
@@ -1,85 +0,0 @@
-require linux-kexecboot.inc
-
-DEFAULT_PREFERENCE = "-1"
-DEFAULT_PREFERENCE_qemuarm = "-1"
-DEFAULT_PREFERENCE_qemux86 = "-1"
-DEFAULT_PREFERENCE_spitz = "1"
-DEFAULT_PREFERENCE_collie = "1"
-DEFAULT_PREFERENCE_c7x0 = "1"
-DEFAULT_PREFERENCE_akita = "1"
-
-# Handy URLs
-# git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046
-# ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.18.tar.bz2
-# ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/linux-2.6.20-rc4.tar.bz2
-# ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/patch-2.6.18-rc6.bz2;patch=1
-# ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/snapshots/patch-2.6.18-rc2-git1.bz2;patch=1
-# ${KERNELORG_MIRROR}/pub/linux/kernel/people/alan/linux-2.6/2.6.10/patch-2.6.10-ac8.gz;patch=1
-# ${KERNELORG_MIRROR}/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc2/2.6.14-rc2-mm1/2.6.14-rc2-mm1.bz2;patch=1
-
-# Patches submitted upstream are towards top of this list 
-# Hacks should clearly named and at the bottom
-SRC_URI += "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.26.tar.bz2 \
-           ${RPSRC}/lzo_jffs2_sysfs-r1.patch;patch=1 \
-           ${RPSRC}/hx2750_base-r34.patch;patch=1 \
-           ${RPSRC}/hx2750_bl-r9.patch;patch=1 \
-           ${RPSRC}/hx2750_pcmcia-r3.patch;patch=1 \
-           ${RPSRC}/pxa_keys-r9.patch;patch=1 \
-           ${RPSRC}/tsc2101-r19.patch;patch=1 \
-           ${RPSRC}/hx2750_test1-r8.patch;patch=1 \
-           ${RPSRC}/sharpsl_pm_fixes1-r0.patch;patch=1 \
-           ${RPSRC}/pm_changes-r1.patch;patch=1 \
-           ${RPSRC}/locomo_kbd_tweak-r2.patch;patch=1 \
-#           ${RPSRC}/pxa27x_overlay-r8.patch;patch=1 \
-           ${RPSRC}/w100_extaccel-r2.patch;patch=1 \
-           ${RPSRC}/w100_extmem-r1.patch;patch=1 \
-           ${RPSRC}/poodle_pm-r6.patch;patch=1 \
-           ${RPSRC}/poodle_lcd_hack-r0.patch;patch=1 \
-           ${RPSRC}/poodle_asoc_fix-r1.patch;patch=1 \
-           file://zaurus-i2c-init.patch;patch=1;status=upstream \
-#           ${RPSRC}/logo_oh-r1.patch.bz2;patch=1;status=unmergable \
-           ${RPSRC}/pxa-linking-bug.patch;patch=1;status=unmergable \
-           file://hostap-monitor-mode.patch;patch=1;status=unmergable \
-           file://serial-add-support-for-non-standard-xtals-to-16c950-driver.patch;patch=1;status=unmergable \
-           ${RPSRC}/mmcsd_large_cards-r1.patch;patch=1;status=hack \
-           ${RPSRC}/mmcsd_no_scr_check-r2.patch;patch=1;status=hack \
-           ${RPSRC}/integrator_rgb-r1.patch;patch=1;status=hack \
-           ${RPSRC}/pxa_cf_initorder_hack-r1.patch;patch=1;status=hack \
-           file://sharpsl-rc-r1.patch;patch=1 \
-           file://spitz_h_rewrite.patch;patch=1 \
-           file://pxa-serial-hack.patch;patch=1;status=hack \
-           file://connectplus-remove-ide-HACK.patch;patch=1;status=hack \
-           file://connectplus-prevent-oops-HACK.patch;patch=1;status=hack \
-           file://htcuni.patch;patch=1 \
-           file://versatile-armv6.patch;patch=1 \
-           "	
-
-# FIXMEs before made default	   
-# ${RPSRC}/mmcsd_no_scr_check-r1.patch;patch=1;status=hack
-
-
-# Add this to enable pm debug code (useful with a serial lead)
-#  ${RPSRC}/sharpsl_pm_debug-r0.patch;patch=1
-
-# Disabled until I find the reason this gives issues with cdc_subset
-#            ${RPSRC}/usb_rndis_tweaks-r0.patch;patch=1 \
-
-
-SRC_URI_append_collie = "\
-	file://collie.patch;patch=1 \
-	file://collie_keymap.patch;patch=1 \
-"
-
-SRC_URI_append_htcuniversal ="\
-	file://htcuni-acx.patch;patch=1;status=external \
-	"
-
-SRC_URI_append_zylonite ="\
-	file://pxa_fb_overlay.patch;patch=1 \
-	file://zylonite-boot.patch;patch=1 \
-	file://zylonite_mtd-r0.patch;patch=1 \
-	file://zylonite_touch-r0.patch;patch=1 \
-	file://zylonite_keypad-r0.patch;patch=1 \
-	"
-
-S = "${WORKDIR}/linux-2.6.26"