diff options
Diffstat (limited to 'packages/ixp4xx/ixp4xx-csr-1.5/2.6.patch')
| -rw-r--r-- | packages/ixp4xx/ixp4xx-csr-1.5/2.6.patch | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/packages/ixp4xx/ixp4xx-csr-1.5/2.6.patch b/packages/ixp4xx/ixp4xx-csr-1.5/2.6.patch new file mode 100644 index 0000000000..58c3cbded5 --- /dev/null +++ b/packages/ixp4xx/ixp4xx-csr-1.5/2.6.patch @@ -0,0 +1,238 @@ +diff -Naur ixp400_xscale_sw.orig/Makefile ixp400_xscale_sw/Makefile +--- ixp400_xscale_sw.orig/Makefile 2005-08-24 00:16:35.000000000 +0200 ++++ ixp400_xscale_sw/Makefile 2005-08-30 19:01:47.000000000 +0200 +@@ -93,15 +93,16 @@ + # platforms. Components that work only for a subset of platforms + # should be added to the relevant *_COMPONENTS lists. + # +-BI_ENDIAN_COMPONENTS := atmdAcc atmm atmsch qmgr npeMh npeDl ethAcc ethDB ethMii hssAcc usb uartAcc featureCtrl ossl osServices + ++# Intel default value: atmdAcc atmm atmsch qmgr npeMh npeDl ethAcc ethDB ethMii hssAcc usb uartAcc featureCtrl ossl osServices ++BI_ENDIAN_COMPONENTS := qmgr npeMh npeDl ethAcc ethDB ethMii ossl osServices featureCtrl + + # The lists below contain the set of components available for each target platform + vxbe_COMPONENTS := $(BI_ENDIAN_COMPONENTS) perfProfAcc dmaAcc + vxle_COMPONENTS := $(BI_ENDIAN_COMPONENTS) perfProfAcc + vxsim_COMPONENTS := $(BI_ENDIAN_COMPONENTS) dmaAcc +-linuxbe_COMPONENTS := $(BI_ENDIAN_COMPONENTS) perfProfAcc dmaAcc +-linuxle_COMPONENTS := $(BI_ENDIAN_COMPONENTS) perfProfAcc ++linuxbe_COMPONENTS := $(BI_ENDIAN_COMPONENTS) # perfProfAcc dmaAcc ++linuxle_COMPONENTS := $(BI_ENDIAN_COMPONENTS) # perfProfAcc + + # To facilitate automated builds, do not modify the value of COMPONENTS directly - + # just change the per-platform component lists above. +@@ -222,10 +223,12 @@ + else # IX_TARGET_OS == vxworks + + # Linux tool names +-ifeq ($(IX_TARGET), linuxbe) +-LINUX_CROSS_COMPILE := $(HARDHAT_BASE)/devkit/arm/xscale_be/bin/xscale_be- +-else +-LINUX_CROSS_COMPILE := $(HARDHAT_BASE)/devkit/arm/xscale_le/bin/xscale_le- ++ifeq "$(LINUX_CROSS_COMPILE)" "" ++ ifeq ($(IX_TARGET), linuxbe) ++ LINUX_CROSS_COMPILE := $(HARDHAT_BASE)/devkit/arm/xscale_be/bin/xscale_be- ++ else ++ LINUX_CROSS_COMPILE := $(HARDHAT_BASE)/devkit/arm/xscale_le/bin/xscale_le- ++ endif + endif + + LD := $(LINUX_CROSS_COMPILE)ld +@@ -253,7 +256,9 @@ + + LINUX_MACH_CFLAGS := -D__LINUX_ARM_ARCH__=5 -mcpu=xscale -mtune=xscale + +-CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -Wno-trigraphs -fno-common -pipe -mapcs-32 -mshort-load-bytes -msoft-float -DMODULE -Isrc/include -I$(NPE_OUTPUT_DIR) -D__linux -DCPU=33 -DXSCALE=33 $(LINUX_MACH_CFLAGS) ++CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -Wno-trigraphs -fno-common -pipe -mapcs-32 -msoft-float -DMODULE -Isrc/include -I$(NPE_OUTPUT_DIR) -D__linux -DCPU=33 -DXSCALE=33 $(LINUX_MACH_CFLAGS) ++ ++# -mshort-load-bytes removed by Marc Singer's patch TODO(hannes) why? + + # Linux linker flags + LDFLAGS := -r +@@ -1139,9 +1144,14 @@ + + ixp400.o : $(OBJ_DIR)/ixp400.o + ++ixp400.ko : $(OBJ_DIR)/ixp400.o + +-$(OBJ_DIR)/ixp400.o: $(COMPONENTS:%=$(OBJ_DIR)/ixp400_%.o) $(NPE_PRODUCTION_HEADER_OBJ) $(OSAL_MODULE) ++$(OBJ_DIR)/ixp400.o: $(COMPONENTS:%=$(OBJ_DIR)/ixp400_%.o) $(NPE_PRODUCTION_HEADER_OBJ) $(OSAL_MODULE) # add this to hack in the ethAcc codelet: $(OBJ_DIR)/ixp400_codelets_ethAcc.o ++ touch $(OBJ_DIR)/ixp400.c ++ cp Makefile.kmod26 $(OBJ_DIR)/Makefile ++ make -C $(OBJ_DIR) + $(LD) $(LDFLAGS) $^ -o $@ ++ make -C $(OBJ_DIR) + + + +diff -Naur ixp400_xscale_sw.orig/Makefile.kmod26 ixp400_xscale_sw/Makefile.kmod26 +--- ixp400_xscale_sw.orig/Makefile.kmod26 1970-01-01 01:00:00.000000000 +0100 ++++ ixp400_xscale_sw/Makefile.kmod26 2005-08-24 22:33:12.000000000 +0200 +@@ -0,0 +1,11 @@ ++obj-m := ixp400.o ++ ++PWD := $(shell pwd) ++ ++LINUX_SRC := $($(IX_TARGET)_KERNEL_DIR) ++ ++default: ++ $(MAKE) ARCH=arm CROSS_COMPILE=$(LINUX_CROSS_COMPILE) V=1 -C $(LINUX_SRC) SUBDIRS=$(PWD) modules ++ ++clean: ++ rm -f ixp400.ko +diff -Naur ixp400_xscale_sw.orig/Readme-Kernel-2_6-Patch.txt ixp400_xscale_sw/Readme-Kernel-2_6-Patch.txt +--- ixp400_xscale_sw.orig/Readme-Kernel-2_6-Patch.txt 1970-01-01 01:00:00.000000000 +0100 ++++ ixp400_xscale_sw/Readme-Kernel-2_6-Patch.txt 2005-09-28 19:50:30.000000000 +0200 +@@ -0,0 +1,49 @@ ++This file describes a patch to use version 1.5 of the Intel Ixp4XX ++Access Library with Linux 2.6 kernels. ++ ++Authors/History ++--------------- ++ ++This patch consists of the changes made by Marc Singer for use of ++version 1.5 of the library with the APEX bootloader, and a patch made ++by Robin Farine and Tom Winkler for use of version 1.4 of the library ++with Linux-2.6 kernels. These changes were merged together by Hannes ++Reich. ++ ++Both patches are incorporated in their entirety, with the exception of ++some tweaks to sleep times in the ethAcc code and modifications to ++the code in src/codelets/usb/ from the Robin Farine / Tom Winkler ++patch. ++ ++Status ++------ ++ ++This code has been tested on a Linksys NSLU2. It works in big-endian ++mode, performance seems around 10% faster than 1.4. ++ ++The code does not work in little-endian mode. It appears as though the ++hardware is initialised correctly, but packet receive / transmit done ++callbacks are never called. ++ ++Licence Information ++------------------- ++ ++The patch is licenced under the same conditions as the original Access ++Library 1.5 (INTEL SOFTWARE LICENSE AGREEMENT). The full text of the ++licence can be downloaded from: ++http://www.intel.com/design/network/swsup/np_sla/ixp400.htm ++ ++The patch is free, unsupported and the authors make no warranties. ++Use it at your own risk, do with it as you see fit so long as you do ++not violate the original licence agreement. ++ ++The authors permit derivative works based upon the patch. ++ ++References ++---------- ++ ++The version 1.4 patch by Robin Farine and Tom Winkler is available from ++http://www.wnk.at/ixp400_accesslib_kernel26/data/patch_accesslib_kernel26_20040811.diff ++ ++The version 1.5 patch by Marc Singer is at ++http://wiki.buici.com/bin/view/Main/IXPAccessLibrary +diff -Naur ixp400_xscale_sw.orig/src/codelets/dmaAcc/IxDmaAccCodelet_p.h ixp400_xscale_sw/src/codelets/dmaAcc/IxDmaAccCodelet_p.h +--- ixp400_xscale_sw.orig/src/codelets/dmaAcc/IxDmaAccCodelet_p.h 2005-08-24 00:16:36.000000000 +0200 ++++ ixp400_xscale_sw/src/codelets/dmaAcc/IxDmaAccCodelet_p.h 2005-08-24 00:18:02.000000000 +0200 +@@ -113,7 +113,7 @@ + * @return IX_FAIL - Error initialising codelet + */ + IX_STATUS +-ixDmaAccCodeletInit(IxDmaNpeId npeId); ++ixDmaAccCodeletInit(IxNpeDlNpeId npeId); + + /** + * @fn ixDmaAccCodeletTestPerform( UINT16 transferLength, +diff -Naur ixp400_xscale_sw.orig/src/ethDB/include/IxEthDB_p.h ixp400_xscale_sw/src/ethDB/include/IxEthDB_p.h +--- ixp400_xscale_sw.orig/src/ethDB/include/IxEthDB_p.h 2005-08-24 00:16:36.000000000 +0200 ++++ ixp400_xscale_sw/src/ethDB/include/IxEthDB_p.h 2005-08-24 00:18:02.000000000 +0200 +@@ -633,7 +633,7 @@ + IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyXORHash(void *macAddress); + + /* Port updates */ +-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBFeature type); ++IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType type); + IX_ETH_DB_PUBLIC void ixEthDBUpdatePortLearningTrees(IxEthDBPortMap triggerPorts); + IX_ETH_DB_PUBLIC void ixEthDBNPEAccessRequest(IxEthDBPortId portID); + IX_ETH_DB_PUBLIC void ixEthDBUpdateLock(void); +diff -Naur ixp400_xscale_sw.orig/src/include/IxTypes.h ixp400_xscale_sw/src/include/IxTypes.h +--- ixp400_xscale_sw.orig/src/include/IxTypes.h 2005-08-24 00:16:36.000000000 +0200 ++++ ixp400_xscale_sw/src/include/IxTypes.h 2005-08-26 01:19:15.000000000 +0200 +@@ -79,6 +79,10 @@ + #endif + #endif + ++#ifndef BIT ++#define BIT(x) ((1)<<(x)) ++#endif ++ + #include "IxOsalBackward.h" + + #endif /* IxTypes_H */ +diff -Naur ixp400_xscale_sw.orig/src/usb/include/usbprivatetypes.h ixp400_xscale_sw/src/usb/include/usbprivatetypes.h +--- ixp400_xscale_sw.orig/src/usb/include/usbprivatetypes.h 2005-08-24 00:16:36.000000000 +0200 ++++ ixp400_xscale_sw/src/usb/include/usbprivatetypes.h 2005-08-24 00:18:02.000000000 +0200 +@@ -164,6 +164,53 @@ + } USBEventProcessor; + + /* UDC Registers */ ++ ++#undef UDCCR ++#undef UDCCS0 ++#undef UDCCS1 ++#undef UDCCS2 ++#undef UDCCS3 ++#undef UDCCS4 ++#undef UDCCS5 ++#undef UDCCS6 ++#undef UDCCS7 ++#undef UDCCS8 ++#undef UDCCS9 ++#undef UDCCS10 ++#undef UDCCS11 ++#undef UDCCS12 ++#undef UDCCS13 ++#undef UDCCS14 ++#undef UDCCS15 ++#undef UICR0 ++#undef UICR1 ++#undef USIR0 ++#undef USIR1 ++#undef UFNHR ++#undef UFNLR ++#undef UBCR2 ++#undef UBCR4 ++#undef UBCR7 ++#undef UBCR9 ++#undef UBCR12 ++#undef UBCR14 ++#undef UDDR0 ++#undef UDDR5 ++#undef UDDR10 ++#undef UDDR15 ++#undef UDDR1 ++#undef UDDR2 ++#undef UDDR3 ++#undef UDDR4 ++#undef UDDR6 ++#undef UDDR7 ++#undef UDDR8 ++#undef UDDR9 ++#undef UDDR11 ++#undef UDDR12 ++#undef UDDR13 ++#undef UDDR14 ++ + typedef struct /* UDCRegisters */ + { + volatile UINT32 UDCCR; +@@ -229,6 +276,7 @@ + volatile UINT32 UDDR14; + } UDCRegisters; + ++ + typedef struct /* USBDeviceContext */ + { + UINT32 checkPattern; /* Check pattern for verifying the context */ |