diff options
Diffstat (limited to 'packages/ixp425-eth/ixp400-eth-1.5')
| -rw-r--r-- | packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch b/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch new file mode 100644 index 0000000000..bd16124e94 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch @@ -0,0 +1,120 @@ +--- ./ixp400_eth.c.base 2005-11-28 23:59:34.476404165 -0800 ++++ ./ixp400_eth.c 2005-11-29 00:42:44.587389574 -0800 +@@ -23,10 +23,10 @@ + * This driver is written and optimized for Intel Xscale technology. + * + * SETUP NOTES: +- * By default, this driver uses predefined MAC addresses. +- * These are set in global var 'default_mac_addr' in this file. +- * If required, these can be changed at run-time using +- * the 'ifconfig' tool. ++ * By default, this driver uses MAC addresses from maclist, if ++ * these are not available the kernel api to randomly generate ++ * a locally assigned MAC address is used. The MAC can be ++ * overridden with ifconfig if absolutely necessary. + * + * Example - to set ixp0 MAC address to 00:02:B3:66:88:AA, + * run ifconfig with the following arguments: +@@ -64,6 +64,7 @@ + #include <linux/sysctl.h> + #include <linux/unistd.h> + #include <linux/version.h> ++#include <net/maclist.h> + + #if KERNEL_VERSION(2,6,0) <= LINUX_VERSION_CODE + #include <linux/workqueue.h> +@@ -130,6 +131,8 @@ static int dev_max_count = 1; /* only NP + static int dev_max_count = 2; /* only NPEB and NPEC */ + #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465) + static int dev_max_count = 3; /* all NPEs are used */ ++#else ++static int dev_max_count = -1;/* use maclist_count */ + #endif + + #ifndef CONFIG_IXP400_NAPI +@@ -621,21 +624,6 @@ static phy_cfg_t default_phy_cfg[] = + #endif + }; + +-/* Default MAC addresses for EthAcc Ports 1 and 2 (using Intel MAC prefix) +- * Default is +- * IX_ETH_PORT_1 -> MAC 00:02:b3:01:01:01 +- * IX_ETH_PORT_2 -> MAC 00:02:b3:02:02:02 +- * IX_ETH_PORT_3 -> MAC 00:02:b3:03:03:03 +-*/ +-static IxEthAccMacAddr default_mac_addr[] = +-{ +- {{0x00, 0x02, 0xB3, 0x01, 0x01, 0x01}} /* EthAcc Port 0 */ +- ,{{0x00, 0x02, 0xB3, 0x02, 0x02, 0x02}} /* EthAcc Port 1 */ +-#if defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465) +- ,{{0x00, 0x02, 0xB3, 0x03, 0x03, 0x03}} /* EthAcc Port 2 */ +-#endif +-}; +- + /* Default mapping of NpeImageIds for EthAcc Ports + * Default is + * IX_ETH_PORT_1 -> IX_ETH_NPE_B +@@ -3337,28 +3325,13 @@ static int __devinit dev_eth_probe(struc + + /* Defines the unicast MAC address + * +- * Here is a good place to read a board-specific MAC address +- * from a non-volatile memory, e.g. an external eeprom. +- * +- * This memcpy uses a default MAC address from this +- * source code. +- * +- * This can be overriden later by the (optional) command +- * +- * ifconfig ixp0 ether 0002b3010101 +- * ++ * The code reads from the maclist API. + */ ++ if (maclist_read((u8(*)[6])&ndev->dev_addr, priv->port_id) || ++ !is_valid_ether_addr(ndev->dev_addr)) ++ random_ether_addr(ndev->dev_addr); + +- memcpy(ndev->dev_addr, +- &default_mac_addr[priv->port_id].macAddress, +- IX_IEEE803_MAC_ADDRESS_SIZE); +- +- /* possibly remove this test and the message when a valid MAC address +- * is not hardcoded in the driver source code. +- */ +- if (is_valid_ether_addr(ndev->dev_addr)) +- { +- P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n", ++ P_INFO("Use MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n", + (unsigned)ndev->dev_addr[0], + (unsigned)ndev->dev_addr[1], + (unsigned)ndev->dev_addr[2], +@@ -3366,7 +3339,6 @@ static int __devinit dev_eth_probe(struc + (unsigned)ndev->dev_addr[4], + (unsigned)ndev->dev_addr[5], + priv->port_id); +- } + + /* Set/update the internal packet size + * This can be overriden later by the command +@@ -3584,12 +3556,15 @@ static int __init ixp400_eth_init(void) + + TRACE; + +- /* check module parameter range */ +- if (dev_max_count == 0 || dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS) +- { +- P_ERROR("Number of ports supported is dev_max_count <= %d\n", IX_ETH_ACC_NUMBER_OF_PORTS); +- return -1; +- } ++ /* fix dev_max_count to maclist_count - the actual number of ++ * available MACs ++ */ ++ if (dev_max_count <= 0) ++ dev_max_count = maclist_count(); ++ if (dev_max_count <= 0) ++ dev_max_count = 1; ++ else if (dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS) ++ dev_max_count = IX_ETH_ACC_NUMBER_OF_PORTS; + + TRACE; + |