1 files changed, 0 insertions, 135 deletions
diff --git a/packages/i2c/files/i2c.h b/packages/i2c/files/i2c.h
deleted file mode 100644
index bbfd276cec..0000000000
--- a/packages/i2c/files/i2c.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/****************************************************************************
-*
-*   Copyright (c) 2006 Dave Hylands     <dhylands@gmail.com>
-*
-*   This program is free software; you can redistribute it and/or modify
-*   it under the terms of the GNU General Public License version 2 as
-*   published by the Free Software Foundation.
-*
-*   Alternatively, this software may be distributed under the terms of BSD
-*   license.
-*
-*   See README and COPYING for more details.
-*
-****************************************************************************/
-/**
-*
-*   @file   i2c.h
-*
-*   @brief  Global definitions for interfacing with the AVR TWI (aka I2C)
-*           hardware
-*
-****************************************************************************/
-/**
-*   @defgroup   xxx   Readable version of xxx.
-*
-*   @brief   Brief description of what xxx does.
-*
-*   Longer description of what xxx does.
-*
-****************************************************************************/
-
-#if !defined( I2C_H )
-#define I2C_H               /**< Include Guard                             */
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <inttypes.h>
-
-#if !defined( CONFIG_H )
-#   include "Config.h"
-#endif
-
-
-/**
- *  @addtogroup I2C
- *  @{
- */
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-/**
- *  Error Codes
- */
-
-#define I2C_ERROR_NONE               0  // No Error
-#define I2C_ERROR_ADDR_NACK         -1  // No response to SLA+R/W
-#define I2C_ERROR_DATA_NACK         -2  // NACK during data transmission
-#define I2C_ERROR_ARBITRATION_LOST  -3  // Lost arbitration
-#define I2C_ERROR_BAD_LEN           -4  // Length is wonky
-#define I2C_ERROR_BAD_CRC           -5  // CRC failed
-#define I2C_ERROR_BUS_ERROR         -6  // Someting weird on the i2c bus
-
-typedef int8_t  I2C_Error_t;
-
-/**
- *  Since we're loosely following the SMBus spec, we restrict the amount
- *  of data in each transaction to 32 bytes.
- */
-
-#define I2C_MAX_DATA_LEN    32
-
-/**
- *  I2C_Addr_t can contain the address of any device on the bus. This
- *  module only supports 7 bit addressing.
- */
-
-typedef uint8_t I2C_Addr_t;
-
-/**
- *  The I2C_CRC macro can be used to remove all CRC support at compile time.
- */
-
-#if CFG_I2C_USE_CRC
-#   define  I2C_CRC(x)  x
-#else
-
-#   define  I2C_CRC(x)
-#endif
-
-
-/**
- *  I2C_Data_t encapsulates the data being read or written on the i2c bus.
- *  This module follows the SMBus spec, whihch specifies a maximum payload
- *  of 32 bytes.
- */
-
-typedef struct
-{
-#if CFG_I2C_USE_CRC
-    uint8_t     m_crc;
-#endif
-
-
-    //  For reads, m_len is the number of bytes actually read (doesn't include
-    //  the CRC - if present). If a block transfer was performed which has a 
-    //  length byte, this length will include the length byte.
-
-    uint8_t     m_len;
-
-    // Note: Under SMBus, a block write can consist of a command, a length,
-    //       32 bytes of payload, and a CRC.
-    //
-    // A read response can consist of a length, 32 bytes of data, and a CRC.
-
-    uint8_t     m_data[ I2C_MAX_DATA_LEN  + 2]; // +1 for the command, +1 for length
-
-} I2C_Data_t;
-
-/* ---- Variable Externs ------------------------------------------------- */
-
-/**
- *  Description of variable.
- */
-
-/* ---- Function Prototypes ---------------------------------------------- */
-
-/*
- *  Just include prototypes here. Put full descriptions in the .c files.
- */
-
-/** @} */
-
-#endif /* I2C_H */
-
-