diff options
Diffstat (limited to 'packages/frodo/frodo-4.2')
| -rw-r--r-- | packages/frodo/frodo-4.2/m4.patch | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/packages/frodo/frodo-4.2/m4.patch b/packages/frodo/frodo-4.2/m4.patch deleted file mode 100644 index e7918156e2..0000000000 --- a/packages/frodo/frodo-4.2/m4.patch +++ /dev/null @@ -1,183 +0,0 @@ - -# -# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher -# - ---- /dev/null 1970-01-01 01:00:00.000000000 +0100 -+++ Src/m4/sdl.m4 2004-01-21 00:43:55.000000000 +0100 -@@ -0,0 +1,175 @@ -+# Configure paths for SDL -+# Sam Lantinga 9/21/99 -+# stolen from Manish Singh -+# stolen back from Frank Belew -+# stolen from Manish Singh -+# Shamelessly stolen from Owen Taylor -+ -+dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) -+dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS -+dnl -+AC_DEFUN(AM_PATH_SDL, -+[dnl -+dnl Get the cflags and libraries from the sdl-config script -+dnl -+AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)], -+ sdl_prefix="$withval", sdl_prefix="") -+AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)], -+ sdl_exec_prefix="$withval", sdl_exec_prefix="") -+AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program], -+ , enable_sdltest=yes) -+ -+ if test x$sdl_exec_prefix != x ; then -+ sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix" -+ if test x${SDL_CONFIG+set} != xset ; then -+ SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config -+ fi -+ fi -+ if test x$sdl_prefix != x ; then -+ sdl_args="$sdl_args --prefix=$sdl_prefix" -+ if test x${SDL_CONFIG+set} != xset ; then -+ SDL_CONFIG=$sdl_prefix/bin/sdl-config -+ fi -+ fi -+ -+ AC_REQUIRE([AC_CANONICAL_TARGET]) -+ PATH="$prefix/bin:$prefix/usr/bin:$PATH" -+ AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH]) -+ min_sdl_version=ifelse([$1], ,0.11.0,$1) -+ AC_MSG_CHECKING(for SDL - version >= $min_sdl_version) -+ no_sdl="" -+ if test "$SDL_CONFIG" = "no" ; then -+ no_sdl=yes -+ else -+ SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags` -+ SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs` -+ -+ sdl_major_version=`$SDL_CONFIG $sdl_args --version | \ -+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` -+ sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \ -+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` -+ sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \ -+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` -+ if test "x$enable_sdltest" = "xyes" ; then -+ ac_save_CFLAGS="$CFLAGS" -+ ac_save_LIBS="$LIBS" -+ CFLAGS="$CFLAGS $SDL_CFLAGS" -+ LIBS="$LIBS $SDL_LIBS" -+dnl -+dnl Now check if the installed SDL is sufficiently new. (Also sanity -+dnl checks the results of sdl-config to some extent -+dnl -+ rm -f conf.sdltest -+ AC_TRY_RUN([ -+#include <stdio.h> -+#include <stdlib.h> -+#include <string.h> -+#include "SDL.h" -+ -+char* -+my_strdup (char *str) -+{ -+ char *new_str; -+ -+ if (str) -+ { -+ new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); -+ strcpy (new_str, str); -+ } -+ else -+ new_str = NULL; -+ -+ return new_str; -+} -+ -+int main (int argc, char *argv[]) -+{ -+ int major, minor, micro; -+ char *tmp_version; -+ -+ /* This hangs on some systems (?) -+ system ("touch conf.sdltest"); -+ */ -+ { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); } -+ -+ /* HP/UX 9 (%@#!) writes to sscanf strings */ -+ tmp_version = my_strdup("$min_sdl_version"); -+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { -+ printf("%s, bad version string\n", "$min_sdl_version"); -+ exit(1); -+ } -+ -+ if (($sdl_major_version > major) || -+ (($sdl_major_version == major) && ($sdl_minor_version > minor)) || -+ (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro))) -+ { -+ return 0; -+ } -+ else -+ { -+ printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version); -+ printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro); -+ printf("*** best to upgrade to the required version.\n"); -+ printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n"); -+ printf("*** to point to the correct copy of sdl-config, and remove the file\n"); -+ printf("*** config.cache before re-running configure\n"); -+ return 1; -+ } -+} -+ -+],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) -+ CFLAGS="$ac_save_CFLAGS" -+ LIBS="$ac_save_LIBS" -+ fi -+ fi -+ if test "x$no_sdl" = x ; then -+ AC_MSG_RESULT(yes) -+ ifelse([$2], , :, [$2]) -+ else -+ AC_MSG_RESULT(no) -+ if test "$SDL_CONFIG" = "no" ; then -+ echo "*** The sdl-config script installed by SDL could not be found" -+ echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in" -+ echo "*** your path, or set the SDL_CONFIG environment variable to the" -+ echo "*** full path to sdl-config." -+ else -+ if test -f conf.sdltest ; then -+ : -+ else -+ echo "*** Could not run SDL test program, checking why..." -+ CFLAGS="$CFLAGS $SDL_CFLAGS" -+ LIBS="$LIBS $SDL_LIBS" -+ AC_TRY_LINK([ -+#include <stdio.h> -+#include "SDL.h" -+ -+int main(int argc, char *argv[]) -+{ return 0; } -+#undef main -+#define main K_and_R_C_main -+], [ return 0; ], -+ [ echo "*** The test program compiled, but did not run. This usually means" -+ echo "*** that the run-time linker is not finding SDL or finding the wrong" -+ echo "*** version of SDL. If it is not finding SDL, you'll need to set your" -+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" -+ echo "*** to the installed location Also, make sure you have run ldconfig if that" -+ echo "*** is required on your system" -+ echo "***" -+ echo "*** If you have an old version installed, it is best to remove it, although" -+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], -+ [ echo "*** The test program failed to compile or link. See the file config.log for the" -+ echo "*** exact error that occured. This usually means SDL was incorrectly installed" -+ echo "*** or that you have moved SDL since it was installed. In the latter case, you" -+ echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ]) -+ CFLAGS="$ac_save_CFLAGS" -+ LIBS="$ac_save_LIBS" -+ fi -+ fi -+ SDL_CFLAGS="" -+ SDL_LIBS="" -+ ifelse([$3], , :, [$3]) -+ fi -+ AC_SUBST(SDL_CFLAGS) -+ AC_SUBST(SDL_LIBS) -+ rm -f conf.sdltest -+]) |