diff options
Diffstat (limited to 'packages/avr-evtd/files/EventScript')
| -rwxr-xr-x | packages/avr-evtd/files/EventScript | 110 |
1 files changed, 0 insertions, 110 deletions
diff --git a/packages/avr-evtd/files/EventScript b/packages/avr-evtd/files/EventScript deleted file mode 100755 index f9824d37c8..0000000000 --- a/packages/avr-evtd/files/EventScript +++ /dev/null @@ -1,110 +0,0 @@ -#!/bin/sh -# Sample Event Script written by Bob Perry -# -# Enters via the avr_evtd daemon with the following command options: -# 0 - Special event following double press of the 'red' reset button -# 1 - AVR device has requested a halt due to error -# 2 - Shutdown request from timed shutdown logic -# 3 - User has released the power button -# 4 - User has pressed the power button -# 5 - User has released the 'red' reset button -# 6 - User has pressed the reset button -# 7 - User has held the power button > 3 seconds -# 8 - User has held the reset button > 3 seconds -# 9 - Disk used beyond DISKCHECK% -# F - Fan failure event, fan stopped for > FANSTOP seconds -# E - User selected EM-Mode -# S - Five minute shutdown warning event -# D - Error message handler - -DEVICE=$2 - -PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin -tag=avr-daemon -facility=user.info - -. /etc/default/avr_evtd - -if [ "$DEBUG" = "ON" ] && [ -d "$LOG" ]; then - echo "`date` command is $1[$3] for $DEVICE" >> $LOG/avr_evtd.log -fi - -if [ -f "/tmp/.inst-instflashing" ] ; then - if [ ! -f "/tmp/.inst-instdone" ] ; then - NOCMD="1" - fi -fi - -case "$1" in - 0) case "$3" in - 1) # Indicate this mode by flashing the DISK FULL LED - echo -n "YYYY" > $DEVICE - # Add an EM IP address or if no ethernet, start it up - FAIL=1 - route -n | grep -q eth0 && FAIL=0 - if [ "$FAIL" -eq 0 ]; then - FAIL=1 - route -n | grep -q 192.168.11.0 && FAIL=0 - if [ "$FAIL" -eq 1 ]; then - ifconfig eth0:EM 192.168.11.150 netmask 255.255.255.0 up - fi - else - /sbin/ifup --force -a -i /etc/avr_evtd/emergency_eth0 - sleep 1 - route add -net 192.168.11.0 netmask 255.255.255.255.0 eth0:EM - fi - if [ -e /sbin/utelnetd ]; then - utelnetd -p 1234 -l /bin/bash & - fi ;; - 3) # Flash more lights to indicate we are desperate - echo -n "SSSS" > $DEVICE - ;; - *) exit -2 ;; - esac ;; - 3) echo -n "[avr_evtd]: Power Button Up" - ;; - 4) echo -n "[avr_evtd]: Power Button Down" - ;; - 5) echo -n "[avr_evtd]: Reset Button Up" - ;; - 6) echo -n "[avr_evtd]: Reset Button Down" - ;; - 1|2|7) echo -n "[avr_evtd]: Shutdown" - if [ ! "$NOCMD" = "1" ] ; then - echo -n "EEEE" > $DEVICE - halt - fi ;; - 8) echo -n "[avr_evtd]: User demanded reset" - if [ ! "$NOCMD" = "1" ] ; then - echo -n "CCCC" > $DEVICE - reboot - fi ;; - 9) if [ "$3" -eq 0 ]; then - echo -n "[avr_evtd]: Disk usage now safe" - else - echo -n "[avr_evtd]: Disk used $3% > Monitored $DISKCHECK%" - fi ;; - E) echo -n "[avr_evtd]: EM mode selected" - ;; - F) echo -n "[avr_evtd]: Fan failure detected" - if [ "$3" -eq 0 ]; then - logger -p user.emerg 'AVR Detected fan fault' - fi - if [ "$3" -eq 4 ]; then - # Illuminate relevant LED and wait for AVR halt message - echo -n "iiii" > $DEVICE - fi ;; - S) if [ "$3" -gt 100 ]; then - MESSAGE="System shutdown in less than 5 minutes" - else - MESSAGE="Shutdown delayed by $3 minutes" - fi - # Produce relevant message - logger -p user.emerg $MESSAGE ;; - D) MESSAGE="[$3] Error with configuration file" - logger -t $tag -p $facility $MESSAGE ;; - *) exit 1 - ;; -esac - -exit 0 |