diff options
Diffstat (limited to 'libsdl/libsdl-x11-1.2.7/acinclude.m4')
-rw-r--r-- | libsdl/libsdl-x11-1.2.7/acinclude.m4 | 189 |
1 files changed, 0 insertions, 189 deletions
diff --git a/libsdl/libsdl-x11-1.2.7/acinclude.m4 b/libsdl/libsdl-x11-1.2.7/acinclude.m4 deleted file mode 100644 index ca2df9d5e5..0000000000 --- a/libsdl/libsdl-x11-1.2.7/acinclude.m4 +++ /dev/null @@ -1,189 +0,0 @@ -# Local macros for the SDL configure.in script - -dnl Function to link an architecture specific file -dnl LINK_ARCH_SRC(source_dir, arch, source_file) -AC_DEFUN([COPY_ARCH_SRC], -[ - old="$srcdir/$1/$2/$3" - new="$1/$3" - if test ! -d $1; then - echo "Creating directory $1" - mkdir -p $1 - fi - echo "Copying $old -> $new" - cat >$new <<__EOF__ -/* WARNING: This file was automatically generated! - * Original: $old - */ -__EOF__ - cat >>$new <$old -]) - -# -# --- esd.m4 --- -# -# Configure paths for ESD -# Manish Singh 98-9-30 -# stolen back from Frank Belew -# stolen from Manish Singh -# Shamelessly stolen from Owen Taylor - -dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) -dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS -dnl -AC_DEFUN([AM_PATH_ESD], -[dnl -dnl Get the cflags and libraries from the esd-config script -dnl -AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)], - esd_prefix="$withval", esd_prefix="") -AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)], - esd_exec_prefix="$withval", esd_exec_prefix="") -AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program], - , enable_esdtest=yes) - - if test x$esd_exec_prefix != x ; then - esd_args="$esd_args --exec-prefix=$esd_exec_prefix" - if test x${ESD_CONFIG+set} != xset ; then - ESD_CONFIG=$esd_exec_prefix/bin/esd-config - fi - fi - if test x$esd_prefix != x ; then - esd_args="$esd_args --prefix=$esd_prefix" - if test x${ESD_CONFIG+set} != xset ; then - ESD_CONFIG=$esd_prefix/bin/esd-config - fi - fi - - AC_PATH_PROG(ESD_CONFIG, esd-config, no) - min_esd_version=ifelse([$1], ,0.2.7,$1) - AC_MSG_CHECKING(for ESD - version >= $min_esd_version) - no_esd="" - if test "$ESD_CONFIG" = "no" ; then - no_esd=yes - else - ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags` - ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs` - - esd_major_version=`$ESD_CONFIG $esd_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` - esd_minor_version=`$ESD_CONFIG $esd_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` - esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` - if test "x$enable_esdtest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $ESD_CFLAGS" - LIBS="$LIBS $ESD_LIBS" -dnl -dnl Now check if the installed ESD is sufficiently new. (Also sanity -dnl checks the results of esd-config to some extent -dnl - rm -f conf.esdtest - AC_TRY_RUN([ -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <esd.h> - -char* -my_strdup (char *str) -{ - char *new_str; - - if (str) - { - new_str = malloc ((strlen (str) + 1) * sizeof(char)); - strcpy (new_str, str); - } - else - new_str = NULL; - - return new_str; -} - -int main () -{ - int major, minor, micro; - char *tmp_version; - - system ("touch conf.esdtest"); - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = my_strdup("$min_esd_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_esd_version"); - exit(1); - } - - if (($esd_major_version > major) || - (($esd_major_version == major) && ($esd_minor_version > minor)) || - (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version); - printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro); - printf("*** best to upgrade to the required version.\n"); - printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n"); - printf("*** to point to the correct copy of esd-config, and remove the file\n"); - printf("*** config.cache before re-running configure\n"); - return 1; - } -} - -],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - if test "x$no_esd" = x ; then - AC_MSG_RESULT(yes) - ifelse([$2], , :, [$2]) - else - AC_MSG_RESULT(no) - if test "$ESD_CONFIG" = "no" ; then - echo "*** The esd-config script installed by ESD could not be found" - echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the ESD_CONFIG environment variable to the" - echo "*** full path to esd-config." - else - if test -f conf.esdtest ; then - : - else - echo "*** Could not run ESD test program, checking why..." - CFLAGS="$CFLAGS $ESD_CFLAGS" - LIBS="$LIBS $ESD_LIBS" - AC_TRY_LINK([ -#include <stdio.h> -#include <esd.h> -], [ return 0; ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding ESD or finding the wrong" - echo "*** version of ESD. If it is not finding ESD, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means ESD was incorrectly installed" - echo "*** or that you have moved ESD since it was installed. In the latter case, you" - echo "*** may want to edit the esd-config script: $ESD_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - ESD_CFLAGS="" - ESD_LIBS="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(ESD_CFLAGS) - AC_SUBST(ESD_LIBS) - rm -f conf.esdtest -]) - |