diff options
Diffstat (limited to 'conf')
| -rw-r--r-- | conf/distro/openslug.conf | 125 |
1 files changed, 34 insertions, 91 deletions
diff --git a/conf/distro/openslug.conf b/conf/distro/openslug.conf index de0a4f46fd..a7c21bca2f 100644 --- a/conf/distro/openslug.conf +++ b/conf/distro/openslug.conf @@ -7,25 +7,17 @@ #---------------------------------------------------------------------------------- DISTRO_NAME = "OpenSlug" DISTRO_VERSION = "2.8-beta" -DISTRO_TYPE ?= "beta" +DISTRO_FEED = "unstable" +DISTRO_TYPE = "beta" -TARGET_FPU = "soft" -TARGET_OS = "linux" - -USE_NLS ?= "no" -USE_NLS_glib-2.0 = "yes" - -INHERIT += " package_ipk debian nslu2-jffs2-image" +# nslu2-jffs2-image builds a complete image (not just the parts) +INHERIT += "nslu2-jffs2-image" # NOTE: to build new packages set OPENSLUG_EXTRA_BBFILES to the full path name to -# the .bb files for the packages to build - see openslug-packages.conf in this +# the .bb files for the packages to build - see ucslugc-packages.conf in this # directory OPENSLUG_EXTRA_BBFILES ?= "" -# pull in the frozen list of bbfiles - this sets BBFILES and this will override any -# setting in local.conf -include conf/distro/freeze.conf - #---------------------------------------------------------------------------------- # FEEDS # The following lines define where on the internet OpenSlug looks for packages @@ -33,30 +25,12 @@ include conf/distro/freeze.conf # (such as a local feed) can be defined in local.conf #---------------------------------------------------------------------------------- # Add to the user's feeds from local.conf (there may be none) -FEED_URIS_append_linux += "cross##http://ipkg.nslu2-linux.org/feeds/openslug/cross/${DISTRO_VERSION}" -FEED_URIS_append_linux += "native##http://ipkg.nslu2-linux.org/feeds/openslug/native/${DISTRO_VERSION}" - -# -# Uncomment the following to get the unstable feeds -#FEED_URIS_append_linux += "unstable_cross##http://ipkg.nslu2-linux.org/feeds/openslug/cross/unstable" -#FEED_URIS_append_linux += "unstable_native##http://ipkg.nslu2-linux.org/feeds/openslug/native/unstable" +FEED_URIS_append += "cross##http://ipkg.nslu2-linux.org/feeds/openslug/cross/${DISTRO_FEED}" +FEED_URIS_append += "native##http://ipkg.nslu2-linux.org/feeds/openslug/native/${DISTRO_FEED}" #---------------------------------------------------------------------------------- # FIRMWARE CONFIGURATION #---------------------------------------------------------------------------------- -# IMAGE BUILD OPTIONS -# ------------------- -IMAGE_FSTYPES = "jffs2" - -OPENSLUG_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-openslug.txt')}" -EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x20000 -D ${OPENSLUG_DEVICE_TABLE}" - -# CMDLINE* macros define the kernel command line. CMDLINE_DEBUG is provided -# to enable/disable debugging in the distro. Here noirqdebug is used to -# remove the messages about unhandled interrupts - people debugging interrupt -# issues in the kernel need to cancel this (set CMDLINE_DEBUG empty in local.conf) -CMDLINE_DEBUG = "noirqdebug" - # EXTRA PACKAGES # -------------- # Filesystem support modules are listed in here for easy removal, @@ -89,38 +63,20 @@ OPENSLUG_STANDARD_RDEPENDS += "${OPENSLUG_EXT2_PROGS}" OPENSLUG_STANDARD_DEPENDS += "reiserfsprogs" OPENSLUG_STANDARD_RDEPENDS += "${OPENSLUG_REISER_PROGS}" -# These lines add a build of the 'upslug2' program which may be -# used to download the final image to an NSLU2. The program can -# be found within the staging/<host>/bin directory. It must -# be run as root but may be safely installed setuid root. -OPENSLUG_STANDARD_DEPENDS += "upslug2-native" - # These lines add support for an X/Y/ZModem package called lrzsz # (this is of use for people with modified NSLU2 hardware which # supports a serial port.) OPENSLUG_STANDARD_DEPENDS += "lrzsz" OPENSLUG_STANDARD_RDEPENDS += "lrzsz" -# This adds udev support in the root fs. -OPENSLUG_STANDARD_DEPENDS += "udev" -OPENSLUG_STANDARD_RDEPENDS += "udev" - -# The 'standard' values are the defaults for the 'extra' packages added -# to the firmware image. None of these things are requirements to have -# a bootable, useable, system however they *are* expected to be present -# in OpenSlug - see ucslugc for a more minimal configuration and some -# more instructions about how to make a non-openslug image. -OPENSLUG_EXTRA_DEPENDS ?= "${OPENSLUG_STANDARD_DEPENDS}" -OPENSLUG_EXTRA_RDEPENDS ?= "${OPENSLUG_STANDARD_RDEPENDS}" - -# Filesystem selection: set in local.conf to override. Adding entries -# here adds the module to the image. The module must be built as part -# of openslug-kernel (i.e. it must be specified as a module in the -# defconfig file). The NLS support charset modules must be given -# explicitly and must match the codepage/iocharset and NLS handling -# for the file systems which require them. The installed lanugage -# set is minimal but sufficient for any file system (since it uses -# utf8). See http://www.nslu2-linux.orgwiki/HowTo/MountFATFileSystems +# Filesystem selection. Adding entries here adds the module to the +# image. The module must be built as part of nslu2-kernel (i.e. it +# must be specified as a module in the defconfig file). The NLS +# support charset modules must be given explicitly and must match +# the codepage/iocharset and NLS handling for the file systems which +# require them. The installed lanugage set is minimal but sufficient +# for any file system (since it uses utf8). See +# http://www.nslu2-linux.orgwiki/HowTo/MountFATFileSystems # for more information on the language behaviour of the DOS file # systems. # @@ -129,7 +85,7 @@ OPENSLUG_EXTRA_RDEPENDS ?= "${OPENSLUG_STANDARD_RDEPENDS}" # NOTE: removing kernel-module-nfs from this list will prevent NFS # boot (however you can do a simple flash file system boot - no # attached disk - and install the nfs modules from ssh.) -OPENSLUG_EXTRA_FILESYSTEMS ?= "\ +OPENSLUG_STANDARD_RDEPENDS += "\ kernel-module-ext2 \ kernel-module-jbd \ kernel-module-ext3 \ @@ -150,39 +106,26 @@ kernel-module-nls-utf8 \ # (use kernel-module-vfat, it shows the long names # if present.) -OPENSLUG_EXTRA_INSTALL ?= "${OPENSLUG_EXTRA_RDEPENDS} ${OPENSLUG_EXTRA_FILESYSTEMS}" +# The 'standard' values are the defaults for the 'extra' packages added +# to the firmware image. None of these things are requirements to have +# a bootable, useable, system however they *are* expected to be present +# in OpenSlug - see nslu2-bag for a more minimal configuration and some +# more instructions about how to make a non-openslug image. +NSLU2_EXTRA_DEPENDS = "${OPENSLUG_STANDARD_DEPENDS}" +NSLU2_EXTRA_RDEPENDS = "${OPENSLUG_STANDARD_RDEPENDS}" #---------------------------------------------------------------------------------- # PACKAGE VERSION CONTROL #---------------------------------------------------------------------------------- -# Select the correct versions of the compiler tools (note that there -# is also some selection in machine/nslu2.conf) -PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial" -PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross" -PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross" - -# compiler/binary/library versions (unslung uses different ones so these -# cannot be in nslu2.conf) -PREFERRED_VERSION_binutils ?= "2.16" -PREFERRED_VERSION_binutils-cross ?= "2.16" -PREFERRED_VERSION_gcc-cross-initial ?= "3.4.4" -PREFERRED_VERSION_gcc-cross ?= "3.4.4" -PREFERRED_VERSION_gcc ?= "3.4.4" -PREFERRED_VERSION_glibc ?= "2.3.5+cvs20050627" - -# Select the smallest provider of x11 libraries -PREFERRED_PROVIDER_x11 ?= "diet-x11" -CVSDATE_diet-x11 ?= "20051005" - -# Select the correct versions of the kernel and modules -PREFERRED_PROVIDER_virtual/kernel ?= "openslug-kernel" -PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross" -PREFERRED_VERSION_openslug-kernel ?= "2.6.14-rc5" - -PREFERRED_PROVIDER_virtual/ixp-eth ?= "ixp425-eth" -PREFERRED_VERSION_ixp4xx-csr ?= "1.4" -PREFERRED_VERSION_ixp425-eth ?= "1.1" -PREFERRED_VERSION_ixp-osal ?= "2.0" -PREFERRED_VERSION_ixp400-eth ?= "1.4" - PREFERRED_VERSION_nslu2-linksys-firmware ?= "2.3r29" + +#---------------------------------------------------------------------------------- +# BASE VERSION SELECTION +#---------------------------------------------------------------------------------- +# b - big-endian +# a - ARM instruction set, no interwork +# g - glibc +# +# Interwork must be turned off here +NSLU2_INTERWORK = "" +include conf/distro/nslu2-bag.conf |