summaryrefslogtreecommitdiff
path: root/conf/machine
diff options
context:
space:
mode:
Diffstat (limited to 'conf/machine')
-rw-r--r--conf/machine/gumstix-custom-connex.conf75
-rw-r--r--conf/machine/gumstix-custom-verdex.conf78
-rw-r--r--conf/machine/include/gumstix.inc60
3 files changed, 181 insertions, 32 deletions
diff --git a/conf/machine/gumstix-custom-connex.conf b/conf/machine/gumstix-custom-connex.conf
new file mode 100644
index 0000000000..1b854582f8
--- /dev/null
+++ b/conf/machine/gumstix-custom-connex.conf
@@ -0,0 +1,75 @@
+#
+# Use this file as a starting point for your custom gumstix configuration
+# Edit it to reflect your hardware setup and then save it a parallel location in user.collection
+
+MACHINE_FEATURES += "connex"
+require conf/machine/include/gumstix.inc
+require conf/machine/include/tune-xscale.inc
+
+#
+# Your flash size = Total flash (in MB) - 1 (for linux kernel partition)
+#ROOT_FLASH_SIZE = "3"
+ROOT_FLASH_SIZE = "15"
+
+#
+# Enable use of virtual terminal for LCD on tty1 if USE_VT = "1"
+USE_VT = "0"
+#USE_VT = "1"
+#SYSVINIT_ENABLED_GETTYS = "1"
+
+#
+# Uncomment features that your board set supports
+
+#MACHINE_FEATURES += "usbhost"
+MACHINE_FEATURES += "usbgadget"
+
+MACHINE_FEATURES += "i2c"
+#MACHINE_FEATURES += "spi"
+
+MACHINE_FEATURES += "serial"
+MACHINE_FEATURES += "bluetooth"
+MACHINE_FEATURES += "sound"
+
+# if you enable robostix you will need to disable both "lcd" and "touchscreen" features
+#MACHINE_FEATURES += "robostix"
+
+#MACHINE_FEATURES += "lcd"
+#MACHINE_FEATURES += "touchscreen"
+#MACHINE_FEATURES += "keyboard"
+
+MACHINE_FEATURES += "pcmcia"
+#MACHINE_FEATURES += "mmc"
+
+MACHINE_FEATURES += "wifi"
+MACHINE_FEATURES += "ethernet"
+
+MACHINE_FEATURES += "fat"
+#MACHINE_FEATURES += "ext2"
+
+#
+# note: selection of MACHINE_FEATURES above will automatically include necessary kernel modules
+# for those features via task-base-gumstix. Include below any extra kernel modules that you want installed
+
+#MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "kernel-module-xxxxxxx"
+
+#
+# Uncomment or add kernel modules that should be autoloaded
+
+module_autoload_proc_gpio = 'proc_gpio'
+
+module_autoload_pcmcia = ${@base_contains('MACHINE_FEATURES', 'pcmcia', 'pcmcia', '',d)}
+module_autoload_pxa2xx_cs = ${@base_contains('MACHINE_FEATURES', 'pcmcia', 'pxa2xx_cs', '',d)}
+
+module_autoload_pxamci = ${@base_contains('MACHINE_FEATURES', 'mmc', 'pxamci', '',d)}
+module_autoload_mmc_block = ${@base_contains('MACHINE_FEATURES', 'mmc', 'mmc_block', '',d)}
+
+module_autoload_ethernet = ${@base_contains('MACHINE_FEATURES', 'ethernet', 'ethernet', '',d)}
+
+module_autoload_gumstix_gadget = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'gumstix_gadget', '',d)}
+#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_file_storage', '',d)}
+module_autoload_g_ether = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_ether', '',d)}
+#module_autoload_g_serial = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_serial', '',d)}
+
+module_autoload_ucb1400-ts = ${@base_contains('MACHINE_FEATURES', 'touchscreen','ucb1400-ts', '',d)}
+module_autoload_evdev = ${@base_contains('MACHINE_FEATURES', 'touchscreen','evdev', '',d)}
+
diff --git a/conf/machine/gumstix-custom-verdex.conf b/conf/machine/gumstix-custom-verdex.conf
new file mode 100644
index 0000000000..f2488d66e1
--- /dev/null
+++ b/conf/machine/gumstix-custom-verdex.conf
@@ -0,0 +1,78 @@
+#
+# Use this file as a starting point for your custom gumstix configuration
+# Edit it to reflect your hardware setup and then save it a parallel location in user.collection
+
+MACHINE_FEATURES += "verdex"
+MACHINE_FEATURES += "iwmmxt"
+require conf/machine/include/gumstix.inc
+require conf/machine/include/tune-xscale.inc
+
+#
+# Your flash size = Total flash (in MB) - 1 (for linux kernel partition)
+ROOT_FLASH_SIZE = "15"
+#ROOT_FLASH_SIZE = "31"
+
+#
+# Enable use of virtual terminal for LCD on tty1 if USE_VT = "1"
+#USE_VT = "0"
+USE_VT = "1"
+SYSVINIT_ENABLED_GETTYS = "1"
+
+#
+# Uncomment features that your board set supports
+
+MACHINE_FEATURES += "usbhost"
+#MACHINE_FEATURES += "usbgadget"
+
+MACHINE_FEATURES += "i2c"
+#MACHINE_FEATURES += "spi"
+
+MACHINE_FEATURES += "serial"
+MACHINE_FEATURES += "bluetooth"
+MACHINE_FEATURES += "sound"
+
+# if you enable robostix you will need to disable both "lcd" and "touchscreen" features
+#MACHINE_FEATURES += "robostix"
+
+MACHINE_FEATURES += "lcd"
+MACHINE_FEATURES += "touchscreen"
+MACHINE_FEATURES += "keyboard"
+
+MACHINE_FEATURES += "pcmcia"
+MACHINE_FEATURES += "mmc"
+
+MACHINE_FEATURES += "wifi"
+MACHINE_FEATURES += "ethernet"
+
+MACHINE_FEATURES += "ext2"
+MACHINE_FEATURES += "fat"
+
+#
+# note: selection of MACHINE_FEATURES above will automatically include necessary kernel modules
+# for those features via task-base-gumstix. Include below any extra kernel modules that you want installed
+
+#MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "kernel-module-xxxxxxx"
+
+#
+# Uncomment or add kernel modules that should be autoloaded
+
+module_autoload_proc_gpio = 'proc_gpio'
+
+module_autoload_pcmcia = ${@base_contains('MACHINE_FEATURES', 'pcmcia', 'pcmcia', '',d)}
+module_autoload_pxa2xx_cs = ${@base_contains('MACHINE_FEATURES', 'pcmcia', 'pxa2xx_cs', '',d)}
+
+module_autoload_pxamci = ${@base_contains('MACHINE_FEATURES', 'mmc', 'pxamci', '',d)}
+module_autoload_mmc_block = ${@base_contains('MACHINE_FEATURES', 'mmc', 'mmc_block', '',d)}
+
+module_autoload_ethernet = ${@base_contains('MACHINE_FEATURES', 'ethernet', 'ethernet', '',d)}
+
+module_autoload_ohci-hcd = ${@base_contains('MACHINE_FEATURES', 'usbhost', 'ohci-hcd', '',d)}
+
+module_autoload_gumstix_gadget = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'gumstix_gadget', '',d)}
+#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_file_storage', '',d)}
+module_autoload_g_ether = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_ether', '',d)}
+#module_autoload_g_serial = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_serial', '',d)}
+
+module_autoload_tsc2003 = ${@base_contains('MACHINE_FEATURES', 'touchscreen','tsc2003', '',d)}
+module_autoload_evdev = ${@base_contains('MACHINE_FEATURES', 'touchscreen','evdev', '',d)}
+
diff --git a/conf/machine/include/gumstix.inc b/conf/machine/include/gumstix.inc
index fc5fd4e136..1bc0b2e000 100644
--- a/conf/machine/include/gumstix.inc
+++ b/conf/machine/include/gumstix.inc
@@ -2,47 +2,43 @@
#@Name: Gumstix pxa2xx boards
#@DESCRIPTION: Gumstix pxa2xx boards
+# Don't edit this file unless you *really* know what you are doing!
+
TARGET_ARCH = "arm"
PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te "
-PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_PROVIDER_virtual/kernel = "gumstix-kernel"
KERNEL_IMAGETYPE = "uImage"
-
-module_autoload_pxamci = "pxamci"
-module_autoload_mmc_block = "mmc_block"
-module_autoload_gumstix_gadget = "gumstix_gadget"
-module_autoload_g_ether = "g_ether"
-module_autoload_smc91x = "smc91x"
-module_autoload_smc911x = "smc911x"
+RDEPENDS_kernel-base = ""
+KERNEL_IMAGE_MAXSIZE = "1048577"
UBOOT_ENTRYPOINT = "a0008000"
-#Assume people have some gumstix extension boards
-MACHINE_FEATURES = "kernel26 alsa ext2 bluetooth"
-
-EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --squash"
+MACHINE_FEATURES += "kernel26 "
+COMBINED_FEATURES ?= ""
-# Install all kernel modules
-#MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS = "kernel-modules"
+IMAGE_FSTYPES = "jffs2"
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --squash-uids"
-# Install only selected kernel modules, comment out line above also
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS = "kernel-module-unix \
- kernel-module-rtc-core \
- kernel-module-rtc-dev \
- kernel-module-rtc-proc \
- kernel-module-rtc-sa1100 \
- kernel-module-rtc-sysfs \
- kernel-module-smc91x \
- kernel-module-gumstix-smc91x \
- kernel-module-smc911x \
- kernel-module-gumstix-smc911x \
- "
-
-# used by sysvinit_2
SERIAL_CONSOLE = "115200 ttyS0 vt100"
-#don't try to access tty1
-USE_VT = "0"
-
-require conf/machine/include/tune-xscale.inc
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS = " \
+ "
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS ?= " \
+ "
+#
+# The following *should* be in a distro.conf file
+# We include them here to avoid creating a new distro
+
+PREFERRED_VERSION_gumstix-kernel = "2.6.21"
+PREFERRED_VERSION_udev = "115"
+PREFERRED_VERSION_gnuplot = "4.0.0"
+PREFERRED_VERSION_dropbear = "0.47"
+PREFERRED_VERSION_wpa-supplicant = "0.5.8"
+PREFERRED_VERSION_bluez-utils = "3.24"
+PREFERRED_VERSION_bluez-utils-alsa = "3.24"
+PREFERRED_VERSION_bluez-libs = "3.24"
+PREFERRED_VERSION_bluez-gstreamer-plugin = "3.24"
+PREFERRED_VERSION_bluez-hcidump = "1.40"
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 03:11:26 +0000