summaryrefslogtreecommitdiff
path: root/conf/machine/gumstix-custom-verdex.conf
diff options
context:
space:
mode:
Diffstat (limited to 'conf/machine/gumstix-custom-verdex.conf')
-rw-r--r--conf/machine/gumstix-custom-verdex.conf78
1 files changed, 78 insertions, 0 deletions
diff --git a/conf/machine/gumstix-custom-verdex.conf b/conf/machine/gumstix-custom-verdex.conf
new file mode 100644
index 0000000000..f2488d66e1
--- /dev/null
+++ b/conf/machine/gumstix-custom-verdex.conf
@@ -0,0 +1,78 @@
+#
+# Use this file as a starting point for your custom gumstix configuration
+# Edit it to reflect your hardware setup and then save it a parallel location in user.collection
+
+MACHINE_FEATURES += "verdex"
+MACHINE_FEATURES += "iwmmxt"
+require conf/machine/include/gumstix.inc
+require conf/machine/include/tune-xscale.inc
+
+#
+# Your flash size = Total flash (in MB) - 1 (for linux kernel partition)
+ROOT_FLASH_SIZE = "15"
+#ROOT_FLASH_SIZE = "31"
+
+#
+# Enable use of virtual terminal for LCD on tty1 if USE_VT = "1"
+#USE_VT = "0"
+USE_VT = "1"
+SYSVINIT_ENABLED_GETTYS = "1"
+
+#
+# Uncomment features that your board set supports
+
+MACHINE_FEATURES += "usbhost"
+#MACHINE_FEATURES += "usbgadget"
+
+MACHINE_FEATURES += "i2c"
+#MACHINE_FEATURES += "spi"
+
+MACHINE_FEATURES += "serial"
+MACHINE_FEATURES += "bluetooth"
+MACHINE_FEATURES += "sound"
+
+# if you enable robostix you will need to disable both "lcd" and "touchscreen" features
+#MACHINE_FEATURES += "robostix"
+
+MACHINE_FEATURES += "lcd"
+MACHINE_FEATURES += "touchscreen"
+MACHINE_FEATURES += "keyboard"
+
+MACHINE_FEATURES += "pcmcia"
+MACHINE_FEATURES += "mmc"
+
+MACHINE_FEATURES += "wifi"
+MACHINE_FEATURES += "ethernet"
+
+MACHINE_FEATURES += "ext2"
+MACHINE_FEATURES += "fat"
+
+#
+# note: selection of MACHINE_FEATURES above will automatically include necessary kernel modules
+# for those features via task-base-gumstix. Include below any extra kernel modules that you want installed
+
+#MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "kernel-module-xxxxxxx"
+
+#
+# Uncomment or add kernel modules that should be autoloaded
+
+module_autoload_proc_gpio = 'proc_gpio'
+
+module_autoload_pcmcia = ${@base_contains('MACHINE_FEATURES', 'pcmcia', 'pcmcia', '',d)}
+module_autoload_pxa2xx_cs = ${@base_contains('MACHINE_FEATURES', 'pcmcia', 'pxa2xx_cs', '',d)}
+
+module_autoload_pxamci = ${@base_contains('MACHINE_FEATURES', 'mmc', 'pxamci', '',d)}
+module_autoload_mmc_block = ${@base_contains('MACHINE_FEATURES', 'mmc', 'mmc_block', '',d)}
+
+module_autoload_ethernet = ${@base_contains('MACHINE_FEATURES', 'ethernet', 'ethernet', '',d)}
+
+module_autoload_ohci-hcd = ${@base_contains('MACHINE_FEATURES', 'usbhost', 'ohci-hcd', '',d)}
+
+module_autoload_gumstix_gadget = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'gumstix_gadget', '',d)}
+#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_file_storage', '',d)}
+module_autoload_g_ether = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_ether', '',d)}
+#module_autoload_g_serial = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_serial', '',d)}
+
+module_autoload_tsc2003 = ${@base_contains('MACHINE_FEATURES', 'touchscreen','tsc2003', '',d)}
+module_autoload_evdev = ${@base_contains('MACHINE_FEATURES', 'touchscreen','evdev', '',d)}
+